From 08458871b60c4bfe49973ce1c27a2b4bc4c159b0 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 21 Feb 2017 18:50:05 +0000 Subject: ASoC: Intel: Skylake: fix spelling mistake: "allocationf" -> "allocation" Trivial fix to spelling mistake in dev_err message. Signed-off-by: Colin Ian King Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index e12520e142ff..635cbb1e7d91 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1165,7 +1165,7 @@ static int skl_pcm_new(struct snd_soc_pcm_runtime *rtd) snd_dma_pci_data(skl->pci), size, MAX_PREALLOC_SIZE); if (retval) { - dev_err(dai->dev, "dma buffer allocationf fail\n"); + dev_err(dai->dev, "dma buffer allocation fail\n"); return retval; } } -- cgit v1.2.3 From b3ec72ace939b0abd75d5d875e77cf0b777debb7 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 20 Feb 2017 19:46:10 +0200 Subject: ASoC: Intel: bdw-rt5677: Use devm_gpiod_get() Since index is always 0 replace devm_gpiod_get_index() by devm_gpiod_get() and apply proper flags. Signed-off-by: Andy Shevchenko Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/intel/boards/bdw-rt5677.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/boards/bdw-rt5677.c b/sound/soc/intel/boards/bdw-rt5677.c index 53c6b4cbb1e1..14d9693c1641 100644 --- a/sound/soc/intel/boards/bdw-rt5677.c +++ b/sound/soc/intel/boards/bdw-rt5677.c @@ -193,13 +193,12 @@ static int bdw_rt5677_init(struct snd_soc_pcm_runtime *rtd) RT5677_CLK_SEL_I2S1_ASRC); /* Request rt5677 GPIO for headphone amp control */ - bdw_rt5677->gpio_hp_en = devm_gpiod_get_index(codec->dev, - "headphone-enable", 0, 0); + bdw_rt5677->gpio_hp_en = devm_gpiod_get(codec->dev, "headphone-enable", + GPIOD_OUT_LOW); if (IS_ERR(bdw_rt5677->gpio_hp_en)) { dev_err(codec->dev, "Can't find HP_AMP_SHDN_L gpio\n"); return PTR_ERR(bdw_rt5677->gpio_hp_en); } - gpiod_direction_output(bdw_rt5677->gpio_hp_en, 0); /* Create and initialize headphone jack */ if (!snd_soc_card_jack_new(rtd->card, "Headphone Jack", -- cgit v1.2.3 From 31d648f051fe82c9d6c2176b1b5ee402b1a18f21 Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Fri, 17 Feb 2017 22:48:56 +0530 Subject: ASoC: Intel: bxtn: Store the FW/Library context at boot Store the DSP firmware/library at boot, so that for S3 to S0 transition use the stored ctx for downloading the firmware to DSP memory. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 55 +++++++++++++++++++++++++-------------- 1 file changed, 36 insertions(+), 19 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 15a063a403cc..7762d5a18fce 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -50,33 +50,47 @@ static unsigned int bxt_get_errorcode(struct sst_dsp *ctx) return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE); } +static void sst_bxt_release_library(struct skl_lib_info *linfo, int lib_count) +{ + int i; + + for (i = 1; i < lib_count; i++) { + if (linfo[i].fw) { + release_firmware(linfo[i].fw); + linfo[i].fw = NULL; + } + } +} + static int bxt_load_library(struct sst_dsp *ctx, struct skl_lib_info *linfo, int lib_count) { struct snd_dma_buffer dmab; struct skl_sst *skl = ctx->thread_context; - const struct firmware *fw = NULL; struct firmware stripped_fw; int ret = 0, i, dma_id, stream_tag; /* library indices start from 1 to N. 0 represents base FW */ for (i = 1; i < lib_count; i++) { - ret = request_firmware(&fw, linfo[i].name, ctx->dev); - if (ret < 0) { - dev_err(ctx->dev, "Request lib %s failed:%d\n", + if (linfo[i].fw == NULL) { + ret = request_firmware(&linfo[i].fw, linfo[i].name, + ctx->dev); + if (ret < 0) { + dev_err(ctx->dev, "Request lib %s failed:%d\n", linfo[i].name, ret); - return ret; + goto load_library_failed; + } } if (skl->is_first_boot) { - ret = snd_skl_parse_uuids(ctx, fw, + ret = snd_skl_parse_uuids(ctx, linfo[i].fw, BXT_ADSP_FW_BIN_HDR_OFFSET, i); if (ret < 0) goto load_library_failed; } - stripped_fw.data = fw->data; - stripped_fw.size = fw->size; + stripped_fw.data = linfo[i].fw->data; + stripped_fw.size = linfo[i].fw->size; skl_dsp_strip_extended_manifest(&stripped_fw); stream_tag = ctx->dsp_ops.prepare(ctx->dev, 0x40, @@ -99,14 +113,12 @@ bxt_load_library(struct sst_dsp *ctx, struct skl_lib_info *linfo, int lib_count) ctx->dsp_ops.trigger(ctx->dev, false, stream_tag); ctx->dsp_ops.cleanup(ctx->dev, &dmab, stream_tag); - release_firmware(fw); - fw = NULL; } return ret; load_library_failed: - release_firmware(fw); + sst_bxt_release_library(linfo, lib_count); return ret; } @@ -208,16 +220,14 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx) struct skl_sst *skl = ctx->thread_context; int ret; - ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev); - if (ret < 0) { - dev_err(ctx->dev, "Request firmware failed %d\n", ret); - goto sst_load_base_firmware_failed; + if (ctx->fw == NULL) { + ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev); + if (ret < 0) { + dev_err(ctx->dev, "Request firmware failed %d\n", ret); + return ret; + } } - /* check for extended manifest */ - if (ctx->fw == NULL) - goto sst_load_base_firmware_failed; - /* prase uuids on first boot */ if (skl->is_first_boot) { ret = snd_skl_parse_uuids(ctx, ctx->fw, BXT_ADSP_FW_BIN_HDR_OFFSET, 0); @@ -265,8 +275,11 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx) } } + return ret; + sst_load_base_firmware_failed: release_firmware(ctx->fw); + ctx->fw = NULL; return ret; } @@ -635,6 +648,10 @@ EXPORT_SYMBOL_GPL(bxt_sst_init_fw); void bxt_sst_dsp_cleanup(struct device *dev, struct skl_sst *ctx) { + + sst_bxt_release_library(ctx->lib_info, ctx->lib_count); + if (ctx->dsp->fw) + release_firmware(ctx->dsp->fw); skl_freeup_uuid_list(ctx); skl_ipc_free(&ctx->ipc); ctx->dsp->cl_dev.ops.cl_cleanup_controller(ctx->dsp); -- cgit v1.2.3 From 7d3f91dc1e4db18b644695c9442c62679a5dff6e Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Fri, 17 Feb 2017 22:48:57 +0530 Subject: ASoC: Intel: bxtn: optimize ROM init retries During S3->S0 transition, sometime ROM init fails because of authentication engine loads later than the OS. In this case driver waits for a longer period and then retries the FW download causing huge delay in resume time of audio device. To avoid this, ROM INIT wait time is set to a optimal value and increased the retries for firmware download. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 7762d5a18fce..d3be1be5a372 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -25,7 +25,8 @@ #include "skl-sst-ipc.h" #define BXT_BASEFW_TIMEOUT 3000 -#define BXT_INIT_TIMEOUT 500 +#define BXT_INIT_TIMEOUT 300 +#define BXT_ROM_INIT_TIMEOUT 70 #define BXT_IPC_PURGE_FW 0x01004000 #define BXT_ROM_INIT 0x5 @@ -45,6 +46,8 @@ /* Delay before scheduling D0i3 entry */ #define BXT_D0I3_DELAY 5000 +#define BXT_FW_ROM_INIT_RETRY 3 + static unsigned int bxt_get_errorcode(struct sst_dsp *ctx) { return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE); @@ -185,7 +188,7 @@ static int sst_bxt_prepare_fw(struct sst_dsp *ctx, /* Step 7: Wait for ROM init */ ret = sst_dsp_register_poll(ctx, BXT_ADSP_FW_STATUS, SKL_FW_STS_MASK, - SKL_FW_INIT, BXT_INIT_TIMEOUT, "ROM Load"); + SKL_FW_INIT, BXT_ROM_INIT_TIMEOUT, "ROM Load"); if (ret < 0) { dev_err(ctx->dev, "Timeout for ROM init, ret:%d\n", ret); goto base_fw_load_failed; @@ -218,7 +221,7 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx) { struct firmware stripped_fw; struct skl_sst *skl = ctx->thread_context; - int ret; + int ret, i; if (ctx->fw == NULL) { ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev); @@ -239,18 +242,20 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx) stripped_fw.size = ctx->fw->size; skl_dsp_strip_extended_manifest(&stripped_fw); - ret = sst_bxt_prepare_fw(ctx, stripped_fw.data, stripped_fw.size); - /* Retry Enabling core and ROM load. Retry seemed to help */ - if (ret < 0) { + + for (i = 0; i < BXT_FW_ROM_INIT_RETRY; i++) { ret = sst_bxt_prepare_fw(ctx, stripped_fw.data, stripped_fw.size); - if (ret < 0) { - dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n", + if (ret == 0) + break; + } + + if (ret < 0) { + dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n", sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE), sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS)); - dev_err(ctx->dev, "Core En/ROM load fail:%d\n", ret); - goto sst_load_base_firmware_failed; - } + dev_err(ctx->dev, "Core En/ROM load fail:%d\n", ret); + goto sst_load_base_firmware_failed; } ret = sst_transfer_fw_host_dma(ctx); -- cgit v1.2.3 From 8e15e762cddf68a401df5c6aa45da3c27712e856 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Mon, 6 Mar 2017 16:12:22 +0900 Subject: ASoC: Intel: Skylake: use a helper macro to rounding-up calculation In 'include/linux/kernel.h', there's a helper macro to round numerical value. Let's use it. Signed-off-by: Takashi Sakamoto Acked-by: Vinod Koul Tested-by: Subhransu S. Prusty Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index ed58b5b3555a..17a9a55026a4 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -299,8 +299,6 @@ static void skl_tplg_update_buffer_size(struct skl_sst *ctx, { int multiplier = 1; struct skl_module_fmt *in_fmt, *out_fmt; - int in_rate, out_rate; - /* Since fixups is applied to pin 0 only, ibs, obs needs * change for pin 0 only @@ -311,21 +309,13 @@ static void skl_tplg_update_buffer_size(struct skl_sst *ctx, if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT) multiplier = 5; - if (in_fmt->s_freq % 1000) - in_rate = (in_fmt->s_freq / 1000) + 1; - else - in_rate = (in_fmt->s_freq / 1000); - - mcfg->ibs = in_rate * (mcfg->in_fmt->channels) * + mcfg->ibs = DIV_ROUND_UP(in_fmt->s_freq, 1000) * + (mcfg->in_fmt->channels) * (mcfg->in_fmt->bit_depth >> 3) * multiplier; - if (mcfg->out_fmt->s_freq % 1000) - out_rate = (mcfg->out_fmt->s_freq / 1000) + 1; - else - out_rate = (mcfg->out_fmt->s_freq / 1000); - - mcfg->obs = out_rate * (mcfg->out_fmt->channels) * + mcfg->obs = DIV_ROUND_UP(mcfg->out_fmt->s_freq, 1000) * + (mcfg->out_fmt->channels) * (mcfg->out_fmt->bit_depth >> 3) * multiplier; } -- cgit v1.2.3 From 998d6fb5123d5b27edd3abd85b767c822bf766fc Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Wed, 8 Mar 2017 17:47:02 +0900 Subject: ASoC: Intel: Skylake: code cleanup for pin fixup limitation As a commit 4cd9899f0d16 ("ASoC: Intel: Skylake: Add multiple pin formats") describes, 'fixups is applied to pin 0 only'. On the other hand, the commit left some codes as what they were. This might confuses readers. This commit fixes the issue. This doesn't change driver behaviour at all. Fixes: 4cd9899f0d16 ("ASoC: Intel: Skylake: Add multiple pin formats") Signed-off-by: Takashi Sakamoto Acked-by: Vinod Koul Tested-by: Subhransu S. Prusty Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 17a9a55026a4..e7836a2e18f0 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -310,13 +310,11 @@ static void skl_tplg_update_buffer_size(struct skl_sst *ctx, multiplier = 5; mcfg->ibs = DIV_ROUND_UP(in_fmt->s_freq, 1000) * - (mcfg->in_fmt->channels) * - (mcfg->in_fmt->bit_depth >> 3) * + in_fmt->channels * (in_fmt->bit_depth >> 3) * multiplier; - mcfg->obs = DIV_ROUND_UP(mcfg->out_fmt->s_freq, 1000) * - (mcfg->out_fmt->channels) * - (mcfg->out_fmt->bit_depth >> 3) * + mcfg->obs = DIV_ROUND_UP(out_fmt->s_freq, 1000) * + out_fmt->channels * (out_fmt->bit_depth >> 3) * multiplier; } -- cgit v1.2.3 From 82cf89de2c9c2efcafde452ed76f85e7ef7f6ce0 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Thu, 9 Mar 2017 18:18:59 -0600 Subject: ASoC: Intel: add machine driver for BYT/CHT + DA7213 Add new machine driver, tested with Ard-Audio-DA7212 [1] connected to MinnowBoardMAX Turbot. The MCLK is managed by the codec driver using the "mclk" handle to reuse existing code, but it could just as well be handled by this machine driver. [1] http://www.dialog-semiconductor.com/content/ard-audio-da7212 Signed-off-by: Pierre-Louis Bossart Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/Kconfig | 12 ++ sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/bytcht_da7213.c | 283 +++++++++++++++++++++++++++++++++ 3 files changed, 297 insertions(+) create mode 100644 sound/soc/intel/boards/bytcht_da7213.c (limited to 'sound/soc') diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index 526855ad479e..8d32fc336eb8 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -202,6 +202,18 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH platforms with MAX98090 audio codec it also can support TI jack chip as aux device. If unsure select "N". +config SND_SOC_INTEL_BYT_CHT_DA7213_MACH + tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_DA7213 + select SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + select SND_SOC_INTEL_SST_MATCH if ACPI + help + This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail + platforms with DA7212/7213 audio codec. + If unsure select "N". + config SND_SOC_INTEL_SKYLAKE tristate select SND_HDA_EXT_CORE diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile index 5639f10774e6..8a5d9edd16ee 100644 --- a/sound/soc/intel/boards/Makefile +++ b/sound/soc/intel/boards/Makefile @@ -10,6 +10,7 @@ snd-soc-sst-bytcr-rt5651-objs := bytcr_rt5651.o snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o snd-soc-sst-cht-bsw-max98090_ti-objs := cht_bsw_max98090_ti.o +snd-soc-sst-byt-cht-da7213-objs := bytcht_da7213.o snd-soc-skl_rt286-objs := skl_rt286.o snd-skl_nau88l25_max98357a-objs := skl_nau88l25_max98357a.o snd-soc-skl_nau88l25_ssm4567-objs := skl_nau88l25_ssm4567.o @@ -26,6 +27,7 @@ obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH) += snd-soc-sst-bytcr-rt5651.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) += snd-soc-sst-cht-bsw-max98090_ti.o +obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH) += snd-soc-sst-byt-cht-da7213.o obj-$(CONFIG_SND_SOC_INTEL_SKL_RT286_MACH) += snd-soc-skl_rt286.o obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH) += snd-skl_nau88l25_max98357a.o obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH) += snd-soc-skl_nau88l25_ssm4567.o diff --git a/sound/soc/intel/boards/bytcht_da7213.c b/sound/soc/intel/boards/bytcht_da7213.c new file mode 100644 index 000000000000..18873e23f404 --- /dev/null +++ b/sound/soc/intel/boards/bytcht_da7213.c @@ -0,0 +1,283 @@ +/* + * bytcht-da7213.c - ASoc Machine driver for Intel Baytrail and + * Cherrytrail-based platforms, with Dialog DA7213 codec + * + * Copyright (C) 2017 Intel Corporation + * Author: Pierre-Louis Bossart + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "../../codecs/da7213.h" +#include "../atom/sst-atom-controls.h" +#include "../common/sst-acpi.h" + +static const struct snd_kcontrol_new controls[] = { + SOC_DAPM_PIN_SWITCH("Headphone Jack"), + SOC_DAPM_PIN_SWITCH("Headset Mic"), + SOC_DAPM_PIN_SWITCH("Mic"), + SOC_DAPM_PIN_SWITCH("Aux In"), +}; + +static const struct snd_soc_dapm_widget dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Mic", NULL), + SND_SOC_DAPM_LINE("Aux In", NULL), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"Headphone Jack", NULL, "HPL"}, + {"Headphone Jack", NULL, "HPR"}, + + {"AUXL", NULL, "Aux In"}, + {"AUXR", NULL, "Aux In"}, + + /* Assume Mic1 is linked to Headset and Mic2 to on-board mic */ + {"MIC1", NULL, "Headset Mic"}, + {"MIC2", NULL, "Mic"}, + + /* SOC-codec link */ + {"ssp2 Tx", NULL, "codec_out0"}, + {"ssp2 Tx", NULL, "codec_out1"}, + {"codec_in0", NULL, "ssp2 Rx"}, + {"codec_in1", NULL, "ssp2 Rx"}, + + {"Playback", NULL, "ssp2 Tx"}, + {"ssp2 Rx", NULL, "Capture"}, +}; + +static int codec_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + int ret; + struct snd_interval *rate = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_RATE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + + /* The DSP will convert the FE rate to 48k, stereo, 24bits */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSP2 to 24-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); + + /* + * Default mode for SSP configuration is TDM 4 slot, override config + * with explicit setting to I2S 2ch 24-bit. The word length is set with + * dai_set_tdm_slot() since there is no other API exposed + */ + ret = snd_soc_dai_set_fmt(rtd->cpu_dai, + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) { + dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); + return ret; + } + + ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24); + if (ret < 0) { + dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); + return ret; + } + + return 0; +} + +static int aif1_startup(struct snd_pcm_substream *substream) +{ + return snd_pcm_hw_constraint_single(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, 48000); +} + +static int aif1_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, DA7213_CLKSRC_MCLK, + 19200000, SND_SOC_CLOCK_IN); + if (ret < 0) + dev_err(codec_dai->dev, "can't set codec sysclk configuration\n"); + + ret = snd_soc_dai_set_pll(codec_dai, 0, + DA7213_SYSCLK_PLL_SRM, 0, DA7213_PLL_FREQ_OUT_98304000); + if (ret < 0) { + dev_err(codec_dai->dev, "failed to start PLL: %d\n", ret); + return -EIO; + } + + return ret; +} + +static int aif1_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int ret; + + ret = snd_soc_dai_set_pll(codec_dai, 0, + DA7213_SYSCLK_MCLK, 0, 0); + if (ret < 0) { + dev_err(codec_dai->dev, "failed to stop PLL: %d\n", ret); + return -EIO; + } + + return ret; +} + +static const struct snd_soc_ops aif1_ops = { + .startup = aif1_startup, +}; + +static const struct snd_soc_ops ssp2_ops = { + .hw_params = aif1_hw_params, + .hw_free = aif1_hw_free, + +}; + +static struct snd_soc_dai_link dailink[] = { + [MERR_DPCM_AUDIO] = { + .name = "Audio Port", + .stream_name = "Audio", + .cpu_dai_name = "media-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .dpcm_capture = 1, + .ops = &aif1_ops, + }, + [MERR_DPCM_DEEP_BUFFER] = { + .name = "Deep-Buffer Audio Port", + .stream_name = "Deep-Buffer Audio", + .cpu_dai_name = "deepbuffer-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .ops = &aif1_ops, + }, + [MERR_DPCM_COMPR] = { + .name = "Compressed Port", + .stream_name = "Compress", + .cpu_dai_name = "compress-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + }, + /* CODEC<->CODEC link */ + /* back ends */ + { + .name = "SSP2-Codec", + .id = 1, + .cpu_dai_name = "ssp2-port", + .platform_name = "sst-mfld-platform", + .no_pcm = 1, + .codec_dai_name = "da7213-hifi", + .codec_name = "i2c-DLGS7213:00", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBS_CFS, + .be_hw_params_fixup = codec_fixup, + .nonatomic = true, + .dpcm_playback = 1, + .dpcm_capture = 1, + .ops = &ssp2_ops, + }, +}; + +/* SoC card */ +static struct snd_soc_card bytcht_da7213_card = { + .name = "bytcht-da7213", + .owner = THIS_MODULE, + .dai_link = dailink, + .num_links = ARRAY_SIZE(dailink), + .controls = controls, + .num_controls = ARRAY_SIZE(controls), + .dapm_widgets = dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(dapm_widgets), + .dapm_routes = audio_map, + .num_dapm_routes = ARRAY_SIZE(audio_map), +}; + +static char codec_name[16]; /* i2c-:00 with HID being 8 chars */ + +static int bytcht_da7213_probe(struct platform_device *pdev) +{ + int ret_val = 0; + int i; + struct snd_soc_card *card; + struct sst_acpi_mach *mach; + const char *i2c_name = NULL; + int dai_index = 0; + + mach = (&pdev->dev)->platform_data; + card = &bytcht_da7213_card; + card->dev = &pdev->dev; + + /* fix index of codec dai */ + dai_index = MERR_DPCM_COMPR + 1; + for (i = 0; i < ARRAY_SIZE(dailink); i++) { + if (!strcmp(dailink[i].codec_name, "i2c-DLGS7213:00")) { + dai_index = i; + break; + } + } + + /* fixup codec name based on HID */ + i2c_name = sst_acpi_find_name_from_hid(mach->id); + if (i2c_name != NULL) { + snprintf(codec_name, sizeof(codec_name), + "%s%s", "i2c-", i2c_name); + dailink[dai_index].codec_name = codec_name; + } + + ret_val = devm_snd_soc_register_card(&pdev->dev, card); + if (ret_val) { + dev_err(&pdev->dev, + "snd_soc_register_card failed %d\n", ret_val); + return ret_val; + } + platform_set_drvdata(pdev, card); + return ret_val; +} + +static struct platform_driver bytcht_da7213_driver = { + .driver = { + .name = "bytcht_da7213", + }, + .probe = bytcht_da7213_probe, +}; +module_platform_driver(bytcht_da7213_driver); + +MODULE_DESCRIPTION("ASoC Intel(R) Baytrail/Cherrytrail+DA7213 Machine driver"); +MODULE_AUTHOR("Pierre-Louis Bossart"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:bytcht_da7213"); -- cgit v1.2.3 From a63b8a117d39ba1b979daa71c6ab350a043694f5 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Thu, 9 Mar 2017 18:19:00 -0600 Subject: ASoC: Intel: Atom: enable BYT/CHT+DA7213 machine driver Add entries in HID table and reference to bytcht_da7213 driver Signed-off-by: Pierre-Louis Bossart Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/atom/sst/sst_acpi.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'sound/soc') diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index 747c0f393d2d..b24bf08606ae 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -480,6 +480,10 @@ static struct sst_acpi_mach sst_acpi_bytcr[] = { &byt_rvp_platform_data }, {"10EC5651", "bytcr_rt5651", "intel/fw_sst_0f28.bin", "bytcr_rt5651", NULL, &byt_rvp_platform_data }, + {"DLGS7212", "bytcht_da7213", "intel/fw_sst_0f28.bin", "bytcht_da7213", NULL, + &byt_rvp_platform_data }, + {"DLGS7213", "bytcht_da7213", "intel/fw_sst_0f28.bin", "bytcht_da7213", NULL, + &byt_rvp_platform_data }, /* some Baytrail platforms rely on RT5645, use CHT machine driver */ {"10EC5645", "cht-bsw-rt5645", "intel/fw_sst_0f28.bin", "cht-bsw", NULL, &byt_rvp_platform_data }, @@ -504,6 +508,10 @@ static struct sst_acpi_mach sst_acpi_chv[] = { {"193C9890", "cht-bsw-max98090", "intel/fw_sst_22a8.bin", "cht-bsw", NULL, &chv_platform_data }, + {"DLGS7212", "bytcht_da7213", "intel/fw_sst_22a8.bin", "bytcht_da7213", NULL, + &chv_platform_data }, + {"DLGS7213", "bytcht_da7213", "intel/fw_sst_22a8.bin", "bytcht_da7213", NULL, + &chv_platform_data }, /* some CHT-T platforms rely on RT5640, use Baytrail machine driver */ {"10EC5640", "bytcr_rt5640", "intel/fw_sst_22a8.bin", "bytcr_rt5640", cht_quirk, &chv_platform_data }, -- cgit v1.2.3 From 759db1c4660b558345573c7476a45c76a6aa07d2 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Thu, 9 Mar 2017 18:19:01 -0600 Subject: ASoC: Intel: boards: add card for MinnowBoardMax/Up I2S access Add card with dummy codec and DAI to make I2S signals observable. Uses Mic and Speaker pins/widgets to control DAPM Signed-off-by: Pierre-Louis Bossart Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/Kconfig | 12 ++ sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/bytcht_nocodec.c | 208 ++++++++++++++++++++++++++++++++ 3 files changed, 222 insertions(+) create mode 100644 sound/soc/intel/boards/bytcht_nocodec.c (limited to 'sound/soc') diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index 8d32fc336eb8..67968ef3bbda 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -214,6 +214,18 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH platforms with DA7212/7213 audio codec. If unsure select "N". +config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH + tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + select SND_SOC_INTEL_SST_MATCH if ACPI + help + This adds support for ASoC machine driver for the MinnowBoard Max or + Up boards and provides access to I2S signals on the Low-Speed + connector + If unsure select "N". + config SND_SOC_INTEL_SKYLAKE tristate select SND_HDA_EXT_CORE diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile index 8a5d9edd16ee..56896e09445d 100644 --- a/sound/soc/intel/boards/Makefile +++ b/sound/soc/intel/boards/Makefile @@ -11,6 +11,7 @@ snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o snd-soc-sst-cht-bsw-max98090_ti-objs := cht_bsw_max98090_ti.o snd-soc-sst-byt-cht-da7213-objs := bytcht_da7213.o +snd-soc-sst-byt-cht-nocodec-objs := bytcht_nocodec.o snd-soc-skl_rt286-objs := skl_rt286.o snd-skl_nau88l25_max98357a-objs := skl_nau88l25_max98357a.o snd-soc-skl_nau88l25_ssm4567-objs := skl_nau88l25_ssm4567.o @@ -28,6 +29,7 @@ obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) += snd-soc-sst-cht-bsw-max98090_ti.o obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH) += snd-soc-sst-byt-cht-da7213.o +obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) += snd-soc-sst-byt-cht-nocodec.o obj-$(CONFIG_SND_SOC_INTEL_SKL_RT286_MACH) += snd-soc-skl_rt286.o obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH) += snd-skl_nau88l25_max98357a.o obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH) += snd-soc-skl_nau88l25_ssm4567.o diff --git a/sound/soc/intel/boards/bytcht_nocodec.c b/sound/soc/intel/boards/bytcht_nocodec.c new file mode 100644 index 000000000000..89853eeaaf9d --- /dev/null +++ b/sound/soc/intel/boards/bytcht_nocodec.c @@ -0,0 +1,208 @@ +/* + * bytcht_nocodec.c - ASoc Machine driver for MinnowBoard Max and Up + * to make I2S signals observable on the Low-Speed connector. Audio codec + * is not managed by ASoC/DAPM + * + * Copyright (C) 2015-2017 Intel Corp + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include +#include +#include +#include +#include "../atom/sst-atom-controls.h" + +static const struct snd_soc_dapm_widget widgets[] = { + SND_SOC_DAPM_MIC("Mic", NULL), + SND_SOC_DAPM_SPK("Speaker", NULL), +}; + +static const struct snd_kcontrol_new controls[] = { + SOC_DAPM_PIN_SWITCH("Mic"), + SOC_DAPM_PIN_SWITCH("Speaker"), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"ssp2 Tx", NULL, "codec_out0"}, + {"ssp2 Tx", NULL, "codec_out1"}, + {"codec_in0", NULL, "ssp2 Rx"}, + {"codec_in1", NULL, "ssp2 Rx"}, + + {"ssp2 Rx", NULL, "Mic"}, + {"Speaker", NULL, "ssp2 Tx"}, +}; + +static int codec_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_RATE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + int ret; + + /* The DSP will convert the FE rate to 48k, stereo, 24bits */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSP2 to 24-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); + + /* + * Default mode for SSP configuration is TDM 4 slot, override config + * with explicit setting to I2S 2ch 24-bit. The word length is set with + * dai_set_tdm_slot() since there is no other API exposed + */ + ret = snd_soc_dai_set_fmt(rtd->cpu_dai, + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + + if (ret < 0) { + dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); + return ret; + } + + ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24); + if (ret < 0) { + dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); + return ret; + } + + return 0; +} + +static unsigned int rates_48000[] = { + 48000, +}; + +static struct snd_pcm_hw_constraint_list constraints_48000 = { + .count = ARRAY_SIZE(rates_48000), + .list = rates_48000, +}; + +static int aif1_startup(struct snd_pcm_substream *substream) +{ + return snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &constraints_48000); +} + +static struct snd_soc_ops aif1_ops = { + .startup = aif1_startup, +}; + +static struct snd_soc_dai_link dais[] = { + [MERR_DPCM_AUDIO] = { + .name = "Audio Port", + .stream_name = "Audio", + .cpu_dai_name = "media-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + .ignore_suspend = 1, + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .dpcm_capture = 1, + .ops = &aif1_ops, + }, + [MERR_DPCM_DEEP_BUFFER] = { + .name = "Deep-Buffer Audio Port", + .stream_name = "Deep-Buffer Audio", + .cpu_dai_name = "deepbuffer-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + .ignore_suspend = 1, + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .ops = &aif1_ops, + }, + [MERR_DPCM_COMPR] = { + .name = "Compressed Port", + .stream_name = "Compress", + .cpu_dai_name = "compress-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + }, + /* CODEC<->CODEC link */ + /* back ends */ + { + .name = "SSP2-LowSpeed Connector", + .id = 1, + .cpu_dai_name = "ssp2-port", + .platform_name = "sst-mfld-platform", + .no_pcm = 1, + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBS_CFS, + .be_hw_params_fixup = codec_fixup, + .ignore_suspend = 1, + .nonatomic = true, + .dpcm_playback = 1, + .dpcm_capture = 1, + }, +}; + +/* SoC card */ +static struct snd_soc_card bytcht_nocodec_card = { + .name = "bytcht-nocodec", + .owner = THIS_MODULE, + .dai_link = dais, + .num_links = ARRAY_SIZE(dais), + .dapm_widgets = widgets, + .num_dapm_widgets = ARRAY_SIZE(widgets), + .dapm_routes = audio_map, + .num_dapm_routes = ARRAY_SIZE(audio_map), + .controls = controls, + .num_controls = ARRAY_SIZE(controls), + .fully_routed = true, +}; + +static int snd_bytcht_nocodec_mc_probe(struct platform_device *pdev) +{ + int ret_val = 0; + + /* register the soc card */ + bytcht_nocodec_card.dev = &pdev->dev; + + ret_val = devm_snd_soc_register_card(&pdev->dev, &bytcht_nocodec_card); + + if (ret_val) { + dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n", + ret_val); + return ret_val; + } + platform_set_drvdata(pdev, &bytcht_nocodec_card); + return ret_val; +} + +static struct platform_driver snd_bytcht_nocodec_mc_driver = { + .driver = { + .name = "bytcht_nocodec", + }, + .probe = snd_bytcht_nocodec_mc_probe, +}; +module_platform_driver(snd_bytcht_nocodec_mc_driver); + +MODULE_DESCRIPTION("ASoC Intel(R) Baytrail/Cherrytrail Nocodec Machine driver"); +MODULE_AUTHOR("Pierre-Louis Bossart "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:bytcht_nocodec"); -- cgit v1.2.3 From a9b6567d03196dc73ace1c34925c7496fb194447 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Thu, 9 Mar 2017 18:19:02 -0600 Subject: ASoC: Intel: Enable bytcht_nocodec machine driver Make sure this machine driver is only used if enabled explicitly and if there is no information found in the SSDT. Signed-off-by: Pierre-Louis Bossart Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/atom/sst/sst_acpi.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index b24bf08606ae..18fe46ef6ac7 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -489,7 +489,14 @@ static struct sst_acpi_mach sst_acpi_bytcr[] = { &byt_rvp_platform_data }, {"10EC5648", "cht-bsw-rt5645", "intel/fw_sst_0f28.bin", "cht-bsw", NULL, &byt_rvp_platform_data }, - +#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) + /* + * This is always last in the table so that it is selected only when + * enabled explicitly and there is no codec-related information in SSDT + */ + {"80860F28", "bytcht_nocodec", "intel/fw_sst_0f28.bin", "bytcht_nocodec", NULL, + &byt_rvp_platform_data }, +#endif {}, }; @@ -520,6 +527,14 @@ static struct sst_acpi_mach sst_acpi_chv[] = { /* some CHT-T platforms rely on RT5651, use Baytrail machine driver */ {"10EC5651", "bytcr_rt5651", "intel/fw_sst_22a8.bin", "bytcr_rt5651", NULL, &chv_platform_data }, +#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) + /* + * This is always last in the table so that it is selected only when + * enabled explicitly and there is no codec-related information in SSDT + */ + {"808622A8", "bytcht_nocodec", "intel/fw_sst_22a8.bin", "bytcht_nocodec", NULL, + &chv_platform_data }, +#endif {}, }; -- cgit v1.2.3 From 6914968b8203aef72edf936319c4d46c6d46401b Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 13 Mar 2017 22:11:23 +0530 Subject: ASoC: Intel: Skylake: Fix to delete DSP pipe after stopping pipe DSP pipe needs to stopped before deleting the pipe. Currently check is for pipe state > STARTED, which is incorrect. So changed to include pipe state STARTED to stop the pipe if it started. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-messages.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index e66870474f10..ed576965cacc 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -1098,7 +1098,7 @@ int skl_delete_pipe(struct skl_sst *ctx, struct skl_pipe *pipe) dev_dbg(ctx->dev, "%s: pipe = %d\n", __func__, pipe->ppl_id); /* If pipe is started, do stop the pipe in FW. */ - if (pipe->state > SKL_PIPE_STARTED) { + if (pipe->state >= SKL_PIPE_STARTED) { ret = skl_set_pipe_state(ctx, pipe, PPL_PAUSED); if (ret < 0) { dev_err(ctx->dev, "Failed to stop pipeline\n"); -- cgit v1.2.3 From 3b563e0a8406bf47cd39ca59f8453b3d968d996a Mon Sep 17 00:00:00 2001 From: Guneshwor Singh Date: Mon, 13 Mar 2017 22:11:24 +0530 Subject: ASoC: Intel: Skylake: Fix not to stop src pipe in pre pmd event handler If the widget is a mixin module, just unbind between source and sink and don't stop the source pipe as there can be multiple sinks connected. Signed-off-by: Guneshwor Singh Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index e7836a2e18f0..d4058d2a8023 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -973,15 +973,6 @@ static int skl_tplg_mixer_dapm_pre_pmd_event(struct snd_soc_dapm_widget *w, src_mconfig = sink_mconfig->m_in_pin[i].tgt_mcfg; if (!src_mconfig) continue; - /* - * If path_found == 1, that means pmd for source - * pipe has not occurred, source is connected to - * some other sink. so its responsibility of sink - * to unbind itself from source. - */ - ret = skl_stop_pipe(ctx, src_mconfig->pipe); - if (ret < 0) - return ret; ret = skl_unbind_modules(ctx, src_mconfig, sink_mconfig); -- cgit v1.2.3 From 5518af9f97940e84de6a4bf6fed212a95278f818 Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 13 Mar 2017 22:11:25 +0530 Subject: ASoC: Intel: bxtn: Disable interrupt when DSP is in D3 When DSP is in D3, no interrupts are expected, so disable interrupt while entering D3. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index d3be1be5a372..b34c96508605 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -537,6 +537,11 @@ static int bxt_set_dsp_D3(struct sst_dsp *ctx, unsigned int core_id) "Failed to set DSP to D3:core id = %d;Continue reset\n", core_id); + if (core_id == SKL_DSP_CORE0_ID) { + /* disable Interrupt */ + skl_ipc_op_int_disable(ctx); + skl_ipc_int_disable(ctx); + } ret = skl_dsp_disable_core(ctx, core_mask); if (ret < 0) { dev_err(ctx->dev, "Failed to disable core %d\n", ret); -- cgit v1.2.3 From 1fb344a33a2f99378128281df97770e2c5182c2d Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 13 Mar 2017 22:11:26 +0530 Subject: ASoC: Intel: bxtn: Update DSP core state in D0 In system suspend, firmware needs to be re-downloaded as IMR is cleared. When firmware is downloaded in D0, core state is not set to running state causing instability with subsequent D0-D3 cycles. So set the core state correctly during D0 and check the DSP core state if not in reset to set the DSP to D3. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 1 + sound/soc/intel/skylake/skl-sst-dsp.c | 6 ++++-- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index b34c96508605..2a2bb944cd40 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -446,6 +446,7 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id) return ret; } } + skl->cores.state[core_id] = SKL_DSP_RUNNING; return ret; } diff --git a/sound/soc/intel/skylake/skl-sst-dsp.c b/sound/soc/intel/skylake/skl-sst-dsp.c index c3deefab65d6..08332723c700 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.c +++ b/sound/soc/intel/skylake/skl-sst-dsp.c @@ -355,12 +355,13 @@ int skl_dsp_get_core(struct sst_dsp *ctx, unsigned int core_id) ret = ctx->fw_ops.set_state_D0(ctx, core_id); if (ret < 0) { dev_err(ctx->dev, "unable to get core%d\n", core_id); - return ret; + goto out; } } skl->cores.usage_count[core_id]++; +out: dev_dbg(ctx->dev, "core id %d state %d usage_count %d\n", core_id, skl->cores.state[core_id], skl->cores.usage_count[core_id]); @@ -379,7 +380,8 @@ int skl_dsp_put_core(struct sst_dsp *ctx, unsigned int core_id) return -EINVAL; } - if (--skl->cores.usage_count[core_id] == 0) { + if ((--skl->cores.usage_count[core_id] == 0) && + (skl->cores.state[core_id] != SKL_DSP_RESET)) { ret = ctx->fw_ops.set_state_D3(ctx, core_id); if (ret < 0) { dev_err(ctx->dev, "unable to put core %d: %d\n", -- cgit v1.2.3 From 03de8c2ef82fae29d53de7eb86b0ca10501499fc Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 13 Mar 2017 22:11:27 +0530 Subject: ASoC: Intel: bxtn: Reload the firmware in case of D3 failure If D3 IPC fails or times out, firmware needs to be reloaded as driver continues the reset. So set the fw_load flag to false to reload the firmware in D0. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 2a2bb944cd40..600d95891996 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -533,10 +533,16 @@ static int bxt_set_dsp_D3(struct sst_dsp *ctx, unsigned int core_id) ret = skl_ipc_set_dx(&skl->ipc, BXT_INSTANCE_ID, BXT_BASE_FW_MODULE_ID, &dx); - if (ret < 0) + if (ret < 0) { dev_err(ctx->dev, "Failed to set DSP to D3:core id = %d;Continue reset\n", core_id); + /* + * In case of D3 failure, re-download the firmware, so set + * fw_loaded to false. + */ + skl->fw_loaded = false; + } if (core_id == SKL_DSP_CORE0_ID) { /* disable Interrupt */ -- cgit v1.2.3 From 3643ff10d48140a283d2e50c0e0a47f290cc3e4d Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 13 Mar 2017 22:11:28 +0530 Subject: ASoC: Intel: Skylake: Remove BE prepare ops Remove BE prepare ops which enables MCLK by default. If MCLK is required to be enabled for any specific platform, it needs to be enabled in the corresponding machine driver. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-pcm.c | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 635cbb1e7d91..e3d206d50f3e 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -262,23 +262,6 @@ static int skl_pcm_open(struct snd_pcm_substream *substream, return 0; } -static int skl_be_prepare(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct skl *skl = get_skl_ctx(dai->dev); - struct skl_sst *ctx = skl->skl_sst; - struct skl_module_cfg *mconfig; - - if (dai->playback_widget->power || dai->capture_widget->power) - return 0; - - mconfig = skl_tplg_be_get_cpr_module(dai, substream->stream); - if (mconfig == NULL) - return -EINVAL; - - return skl_dsp_set_dma_control(ctx, mconfig); -} - static int skl_pcm_prepare(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -649,7 +632,6 @@ static struct snd_soc_dai_ops skl_dmic_dai_ops = { static struct snd_soc_dai_ops skl_be_ssp_dai_ops = { .hw_params = skl_be_hw_params, - .prepare = skl_be_prepare, }; static struct snd_soc_dai_ops skl_link_dai_ops = { -- cgit v1.2.3 From cb729d80b5c556acf38f1f04a1f0550472a75987 Mon Sep 17 00:00:00 2001 From: G Kranthi Date: Mon, 13 Mar 2017 22:11:29 +0530 Subject: ASoC: Intel: Skylake: Disable notifications at boot after DSP FW init DSP firmware sends notification every 1ms, which is disabled in runtime suspend. But if a system has no runtime pm, we keep getting notification, so disable after FW init as well. Signed-off-by: G Kranthi Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-messages.c | 2 +- sound/soc/intel/skylake/skl-pcm.c | 1 + sound/soc/intel/skylake/skl-sst-dsp.h | 2 ++ 3 files changed, 4 insertions(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index ed576965cacc..29523ddcfab0 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -58,7 +58,7 @@ static int skl_free_dma_buf(struct device *dev, struct snd_dma_buffer *dmab) #define NOTIFICATION_MASK 0xf /* disable notfication for underruns/overruns from firmware module */ -static void skl_dsp_enable_notification(struct skl_sst *ctx, bool enable) +void skl_dsp_enable_notification(struct skl_sst *ctx, bool enable) { struct notification_mask mask; struct skl_ipc_large_config_msg msg = {0}; diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index e3d206d50f3e..2f90bc40be77 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1214,6 +1214,7 @@ static int skl_platform_soc_probe(struct snd_soc_platform *platform) } skl_populate_modules(skl); skl->skl_sst->update_d0i3c = skl_update_d0i3c; + skl_dsp_enable_notification(skl->skl_sst, false); } pm_runtime_mark_last_busy(platform->dev); pm_runtime_put_autosuspend(platform->dev); diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h index 849410d0823e..e8d1e149e0cd 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -235,4 +235,6 @@ int skl_get_pvt_instance_id_map(struct skl_sst *ctx, void skl_freeup_uuid_list(struct skl_sst *ctx); int skl_dsp_strip_extended_manifest(struct firmware *fw); +void skl_dsp_enable_notification(struct skl_sst *ctx, bool enable); + #endif /*__SKL_SST_DSP_H__*/ -- cgit v1.2.3 From 7bd86a30599de479bd863e18472207337485d339 Mon Sep 17 00:00:00 2001 From: G Kranthi Date: Mon, 13 Mar 2017 22:11:30 +0530 Subject: ASoC: Intel: Skylake: Remove get dsp_ops in cleanup routine dsp ops is already set in init, so use this in cleanup routine instead of again retrieving it. Also constify struct skl_dsp_ops. Signed-off-by: G Kranthi Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-messages.c | 8 ++------ sound/soc/intel/skylake/skl-sst-ipc.h | 2 ++ 2 files changed, 4 insertions(+), 6 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index 29523ddcfab0..ba1ec973ded7 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -274,6 +274,7 @@ int skl_init_dsp(struct skl *skl) if (ret < 0) return ret; + skl->skl_sst->dsp_ops = ops; dev_dbg(bus->dev, "dsp registration status=%d\n", ret); return ret; @@ -284,16 +285,11 @@ int skl_free_dsp(struct skl *skl) struct hdac_ext_bus *ebus = &skl->ebus; struct hdac_bus *bus = ebus_to_hbus(ebus); struct skl_sst *ctx = skl->skl_sst; - const struct skl_dsp_ops *ops; /* disable ppcap interrupt */ snd_hdac_ext_bus_ppcap_int_enable(&skl->ebus, false); - ops = skl_get_dsp_ops(skl->pci->device); - if (!ops) - return -EIO; - - ops->cleanup(bus->dev, ctx); + ctx->dsp_ops->cleanup(bus->dev, ctx); if (ctx->dsp->addr.lpe) iounmap(ctx->dsp->addr.lpe); diff --git a/sound/soc/intel/skylake/skl-sst-ipc.h b/sound/soc/intel/skylake/skl-sst-ipc.h index 9660ace379ab..7d21f055328d 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.h +++ b/sound/soc/intel/skylake/skl-sst-ipc.h @@ -105,6 +105,8 @@ struct skl_sst { void (*update_d0i3c)(struct device *dev, bool enable); struct skl_d0i3_data d0i3; + + const struct skl_dsp_ops *dsp_ops; }; struct skl_ipc_init_instance_msg { -- cgit v1.2.3 From b7d0254c51f3ce79a8931690e8a2f035208f6b55 Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 13 Mar 2017 22:11:31 +0530 Subject: ASoC: Intel: Skylake: Fix module load when module size > DMA buffer size When module size > DMA buffer size, driver copies first chunk and waits for the BDL complete interrupt. BDL complete interrupt never occurs and wait time expires as module load IPC is not send to start the DMA from DSP. To fix the above issue need to follow the below steps: 1. After copying the first chunk, send the module load IPC to start the DMA. 2. Wait for the BDL interrupt. Once interrupt is received, copy the next chunk. 3. Continue step 2 till all bytes are copied. 4. When all the bytes are copied (bytes_left = 0), wait for module load IPC response 5. Handled module load IPC response messages, check the load module IPC response and wake up the thread to complete module load. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-sst-cldma.c | 26 ++++++++----- sound/soc/intel/skylake/skl-sst-cldma.h | 2 +- sound/soc/intel/skylake/skl-sst-dsp.h | 1 + sound/soc/intel/skylake/skl-sst-ipc.c | 66 ++++++++++++++++++++++----------- sound/soc/intel/skylake/skl-sst-ipc.h | 5 +++ sound/soc/intel/skylake/skl-sst.c | 53 ++++++++++++++++++++------ 6 files changed, 110 insertions(+), 43 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-sst-cldma.c b/sound/soc/intel/skylake/skl-sst-cldma.c index c9f6d87381db..d2b1d60fec02 100644 --- a/sound/soc/intel/skylake/skl-sst-cldma.c +++ b/sound/soc/intel/skylake/skl-sst-cldma.c @@ -164,7 +164,7 @@ static void skl_cldma_cleanup(struct sst_dsp *ctx) ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_bdl); } -static int skl_cldma_wait_interruptible(struct sst_dsp *ctx) +int skl_cldma_wait_interruptible(struct sst_dsp *ctx) { int ret = 0; @@ -243,9 +243,14 @@ static void skl_cldma_fill_buffer(struct sst_dsp *ctx, unsigned int size, * 2. Polling on fw register to identify if data left to transferred doesn't * fill the ring buffer. Caller takes care of polling the required status * register to identify the transfer status. + * 3. if wait flag is set, waits for DBL interrupt to copy the next chunk till + * bytes_left is 0. + * if wait flag is not set, doesn't wait for BDL interrupt. after ccopying + * the first chunk return the no of bytes_left to be copied. */ static int -skl_cldma_copy_to_buf(struct sst_dsp *ctx, const void *bin, u32 total_size) +skl_cldma_copy_to_buf(struct sst_dsp *ctx, const void *bin, + u32 total_size, bool wait) { int ret = 0; bool start = true; @@ -272,13 +277,14 @@ skl_cldma_copy_to_buf(struct sst_dsp *ctx, const void *bin, u32 total_size) size = ctx->cl_dev.bufsize; skl_cldma_fill_buffer(ctx, size, curr_pos, true, start); - start = false; - ret = skl_cldma_wait_interruptible(ctx); - if (ret < 0) { - skl_cldma_stop(ctx); - return ret; + if (wait) { + start = false; + ret = skl_cldma_wait_interruptible(ctx); + if (ret < 0) { + skl_cldma_stop(ctx); + return ret; + } } - } else { skl_cldma_int_disable(ctx); @@ -298,9 +304,11 @@ skl_cldma_copy_to_buf(struct sst_dsp *ctx, const void *bin, u32 total_size) } bytes_left -= size; curr_pos = curr_pos + size; + if (!wait) + return bytes_left; } - return ret; + return bytes_left; } void skl_cldma_process_intr(struct sst_dsp *ctx) diff --git a/sound/soc/intel/skylake/skl-sst-cldma.h b/sound/soc/intel/skylake/skl-sst-cldma.h index 99e4c86b6358..5b730a1a0ae4 100644 --- a/sound/soc/intel/skylake/skl-sst-cldma.h +++ b/sound/soc/intel/skylake/skl-sst-cldma.h @@ -213,7 +213,7 @@ struct skl_cl_dev_ops { void (*cl_trigger)(struct sst_dsp *ctx, bool enable); void (*cl_cleanup_controller)(struct sst_dsp *ctx); int (*cl_copy_to_dmabuf)(struct sst_dsp *ctx, - const void *bin, u32 size); + const void *bin, u32 size, bool wait); void (*cl_stop_dma)(struct sst_dsp *ctx); }; diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h index e8d1e149e0cd..5d7a93aa5bed 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -186,6 +186,7 @@ struct skl_module_table { void skl_cldma_process_intr(struct sst_dsp *ctx); void skl_cldma_int_disable(struct sst_dsp *ctx); int skl_cldma_prepare(struct sst_dsp *ctx); +int skl_cldma_wait_interruptible(struct sst_dsp *ctx); void skl_dsp_set_state_locked(struct sst_dsp *ctx, int state); struct sst_dsp *skl_dsp_ctx_init(struct device *dev, diff --git a/sound/soc/intel/skylake/skl-sst-ipc.c b/sound/soc/intel/skylake/skl-sst-ipc.c index e1391dfbc9e9..e90fe2c0bf2c 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.c +++ b/sound/soc/intel/skylake/skl-sst-ipc.c @@ -34,6 +34,11 @@ #define IPC_GLB_REPLY_STATUS_MASK ((0x1 << IPC_GLB_REPLY_STATUS_SHIFT) - 1) #define IPC_GLB_REPLY_STATUS(x) ((x) << IPC_GLB_REPLY_STATUS_SHIFT) +#define IPC_GLB_REPLY_TYPE_SHIFT 29 +#define IPC_GLB_REPLY_TYPE_MASK 0x1F +#define IPC_GLB_REPLY_TYPE(x) (((x) >> IPC_GLB_REPLY_TYPE_SHIFT) \ + & IPC_GLB_RPLY_TYPE_MASK) + #define IPC_TIMEOUT_MSECS 3000 #define IPC_EMPTY_LIST_SIZE 8 @@ -387,12 +392,27 @@ static int skl_ipc_process_notification(struct sst_generic_ipc *ipc, return 0; } +static int skl_ipc_set_reply_error_code(u32 reply) +{ + switch (reply) { + case IPC_GLB_REPLY_OUT_OF_MEMORY: + return -ENOMEM; + + case IPC_GLB_REPLY_BUSY: + return -EBUSY; + + default: + return -EINVAL; + } +} + static void skl_ipc_process_reply(struct sst_generic_ipc *ipc, struct skl_ipc_header header) { struct ipc_message *msg; u32 reply = header.primary & IPC_GLB_REPLY_STATUS_MASK; u64 *ipc_header = (u64 *)(&header); + struct skl_sst *skl = container_of(ipc, struct skl_sst, ipc); msg = skl_ipc_reply_get_msg(ipc, *ipc_header); if (msg == NULL) { @@ -401,33 +421,37 @@ static void skl_ipc_process_reply(struct sst_generic_ipc *ipc, } /* first process the header */ - switch (reply) { - case IPC_GLB_REPLY_SUCCESS: + if (reply == IPC_GLB_REPLY_SUCCESS) { dev_dbg(ipc->dev, "ipc FW reply %x: success\n", header.primary); /* copy the rx data from the mailbox */ sst_dsp_inbox_read(ipc->dsp, msg->rx_data, msg->rx_size); - break; - - case IPC_GLB_REPLY_OUT_OF_MEMORY: - dev_err(ipc->dev, "ipc fw reply: %x: no memory\n", header.primary); - msg->errno = -ENOMEM; - break; - - case IPC_GLB_REPLY_BUSY: - dev_err(ipc->dev, "ipc fw reply: %x: Busy\n", header.primary); - msg->errno = -EBUSY; - break; + switch (IPC_GLB_NOTIFY_MSG_TYPE(header.primary)) { + case IPC_GLB_LOAD_MULTIPLE_MODS: + skl->mod_load_complete = true; + skl->mod_load_status = true; + wake_up(&skl->mod_load_wait); + break; - default: - dev_err(ipc->dev, "Unknown ipc reply: 0x%x\n", reply); - msg->errno = -EINVAL; - break; - } + default: + break; - if (reply != IPC_GLB_REPLY_SUCCESS) { + } + } else { + msg->errno = skl_ipc_set_reply_error_code(reply); dev_err(ipc->dev, "ipc FW reply: reply=%d\n", reply); dev_err(ipc->dev, "FW Error Code: %u\n", ipc->dsp->fw_ops.get_fw_errcode(ipc->dsp)); + switch (IPC_GLB_NOTIFY_MSG_TYPE(header.primary)) { + case IPC_GLB_LOAD_MULTIPLE_MODS: + skl->mod_load_complete = true; + skl->mod_load_status = false; + wake_up(&skl->mod_load_wait); + break; + + default: + break; + + } } list_del(&msg->list); @@ -811,8 +835,8 @@ int skl_ipc_load_modules(struct sst_generic_ipc *ipc, header.primary |= IPC_GLB_TYPE(IPC_GLB_LOAD_MULTIPLE_MODS); header.primary |= IPC_LOAD_MODULE_CNT(module_cnt); - ret = sst_ipc_tx_message_wait(ipc, *ipc_header, data, - (sizeof(u16) * module_cnt), NULL, 0); + ret = sst_ipc_tx_message_nowait(ipc, *ipc_header, data, + (sizeof(u16) * module_cnt)); if (ret < 0) dev_err(ipc->dev, "ipc: load modules failed :%d\n", ret); diff --git a/sound/soc/intel/skylake/skl-sst-ipc.h b/sound/soc/intel/skylake/skl-sst-ipc.h index 7d21f055328d..fc07c397b060 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.h +++ b/sound/soc/intel/skylake/skl-sst-ipc.h @@ -77,6 +77,11 @@ struct skl_sst { wait_queue_head_t boot_wait; bool boot_complete; + /* module load */ + wait_queue_head_t mod_load_wait; + bool mod_load_complete; + bool mod_load_status; + /* IPC messaging */ struct sst_generic_ipc ipc; diff --git a/sound/soc/intel/skylake/skl-sst.c b/sound/soc/intel/skylake/skl-sst.c index b30bd384c8d3..39d4aaac73bf 100644 --- a/sound/soc/intel/skylake/skl-sst.c +++ b/sound/soc/intel/skylake/skl-sst.c @@ -52,7 +52,8 @@ static int skl_transfer_firmware(struct sst_dsp *ctx, { int ret = 0; - ret = ctx->cl_dev.ops.cl_copy_to_dmabuf(ctx, basefw, base_fw_size); + ret = ctx->cl_dev.ops.cl_copy_to_dmabuf(ctx, basefw, base_fw_size, + true); if (ret < 0) return ret; @@ -323,22 +324,49 @@ static struct skl_module_table *skl_module_get_from_id( return NULL; } -static int skl_transfer_module(struct sst_dsp *ctx, - struct skl_load_module_info *module) +static int skl_transfer_module(struct sst_dsp *ctx, const void *data, + u32 size, u16 mod_id) { - int ret; + int ret, bytes_left, curr_pos; struct skl_sst *skl = ctx->thread_context; + skl->mod_load_complete = false; + init_waitqueue_head(&skl->mod_load_wait); - ret = ctx->cl_dev.ops.cl_copy_to_dmabuf(ctx, module->fw->data, - module->fw->size); - if (ret < 0) - return ret; + bytes_left = ctx->cl_dev.ops.cl_copy_to_dmabuf(ctx, data, size, false); + if (bytes_left < 0) + return bytes_left; - ret = skl_ipc_load_modules(&skl->ipc, SKL_NUM_MODULES, - (void *)&module->mod_id); - if (ret < 0) + ret = skl_ipc_load_modules(&skl->ipc, SKL_NUM_MODULES, &mod_id); + if (ret < 0) { dev_err(ctx->dev, "Failed to Load module: %d\n", ret); + goto out; + } + + /* + * if bytes_left > 0 then wait for BDL complete interrupt and + * copy the next chunk till bytes_left is 0. if bytes_left is + * is zero, then wait for load module IPC reply + */ + while (bytes_left > 0) { + curr_pos = size - bytes_left; + + ret = skl_cldma_wait_interruptible(ctx); + if (ret < 0) + goto out; + + bytes_left = ctx->cl_dev.ops.cl_copy_to_dmabuf(ctx, + data + curr_pos, + bytes_left, false); + } + + ret = wait_event_timeout(skl->mod_load_wait, skl->mod_load_complete, + msecs_to_jiffies(SKL_IPC_BOOT_MSECS)); + if (ret == 0 || !skl->mod_load_status) { + dev_err(ctx->dev, "Module Load failed\n"); + ret = -EIO; + } +out: ctx->cl_dev.ops.cl_stop_dma(ctx); return ret; @@ -365,7 +393,8 @@ static int skl_load_module(struct sst_dsp *ctx, u16 mod_id, u8 *guid) } if (!module_entry->usage_cnt) { - ret = skl_transfer_module(ctx, module_entry->mod_info); + ret = skl_transfer_module(ctx, module_entry->mod_info->fw->data, + module_entry->mod_info->fw->size, mod_id); if (ret < 0) { dev_err(ctx->dev, "Failed to Load module\n"); return ret; -- cgit v1.2.3 From bf3e5ef5d549f650c13bef2b2192057cfef33d38 Mon Sep 17 00:00:00 2001 From: Dharageswari R Date: Mon, 13 Mar 2017 22:11:32 +0530 Subject: ASoC: Intel: Skylake: Fix parameter overwrite for KPB Module KPB module default parameter were overwritten by the dynamic instance id once use case is executed. This will cause module crash from subsequent execution of use case as the updated parameters are used. So instead of over writing the default parameter, make a copy and update the module parameter and use this in IPC message. Signed-off-by: Dharageswari R Signed-off-by: Kranthikumar, GudishaX Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 47 +++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 18 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index d4058d2a8023..c6bd4bb49ec0 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -678,26 +678,29 @@ static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w, return 0; } -static int skl_fill_sink_instance_id(struct skl_sst *ctx, - struct skl_algo_data *alg_data) +static int skl_fill_sink_instance_id(struct skl_sst *ctx, u32 *params, + int size, struct skl_module_cfg *mcfg) { - struct skl_kpb_params *params = (struct skl_kpb_params *)alg_data->params; - struct skl_mod_inst_map *inst; int i, pvt_id; - inst = params->map; + if (mcfg->m_type == SKL_MODULE_TYPE_KPB) { + struct skl_kpb_params *kpb_params = + (struct skl_kpb_params *)params; + struct skl_mod_inst_map *inst = kpb_params->map; - for (i = 0; i < params->num_modules; i++) { - pvt_id = skl_get_pvt_instance_id_map(ctx, - inst->mod_id, inst->inst_id); - if (pvt_id < 0) - return -EINVAL; - inst->inst_id = pvt_id; - inst++; + for (i = 0; i < kpb_params->num_modules; i++) { + pvt_id = skl_get_pvt_instance_id_map(ctx, inst->mod_id, + inst->inst_id); + if (pvt_id < 0) + return -EINVAL; + + inst->inst_id = pvt_id; + inst++; + } } + return 0; } - /* * Some modules require params to be set after the module is bound to * all pins connected. @@ -714,6 +717,7 @@ static int skl_tplg_set_module_bind_params(struct snd_soc_dapm_widget *w, struct soc_bytes_ext *sb; struct skl_algo_data *bc; struct skl_specific_cfg *sp_cfg; + u32 *params; /* * check all out/in pins are in bind state. @@ -746,11 +750,18 @@ static int skl_tplg_set_module_bind_params(struct snd_soc_dapm_widget *w, bc = (struct skl_algo_data *)sb->dobj.private; if (bc->set_params == SKL_PARAM_BIND) { - if (mconfig->m_type == SKL_MODULE_TYPE_KPB) - skl_fill_sink_instance_id(ctx, bc); - ret = skl_set_module_params(ctx, - (u32 *)bc->params, bc->max, - bc->param_id, mconfig); + params = kzalloc(bc->max, GFP_KERNEL); + if (!params) + return -ENOMEM; + + memcpy(params, bc->params, bc->max); + skl_fill_sink_instance_id(ctx, params, bc->max, + mconfig); + + ret = skl_set_module_params(ctx, params, + bc->max, bc->param_id, mconfig); + kfree(params); + if (ret < 0) return ret; } -- cgit v1.2.3 From d7fba9dcf6cd74cb8a8ab1c4c2629a3f7df00bc9 Mon Sep 17 00:00:00 2001 From: Harsha Priya Date: Wed, 15 Mar 2017 16:28:25 -0700 Subject: ASoC: Intel: Update bxt_da7219_max98357a to add a new This patch adds a platform clock widget to turn off the clock only when both headset capture and headset playback are not in use. This removes turning off the clock in hw_free so that the clock is on when either capture or playback of headset is in progress. Signed-off-by: Harsha Priya Signed-off-by: Sathyanarayana Nujella Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/boards/bxt_da7219_max98357a.c | 97 +++++++++++++++------------ 1 file changed, 53 insertions(+), 44 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c index 2cda06cde4d1..3a8c4d954a91 100644 --- a/sound/soc/intel/boards/bxt_da7219_max98357a.c +++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c @@ -55,6 +55,54 @@ enum { BXT_DPCM_AUDIO_HDMI3_PB, }; +static inline struct snd_soc_dai *bxt_get_codec_dai(struct snd_soc_card *card) +{ + struct snd_soc_pcm_runtime *rtd; + + list_for_each_entry(rtd, &card->rtd_list, list) { + + if (!strncmp(rtd->codec_dai->name, BXT_DIALOG_CODEC_DAI, + strlen(BXT_DIALOG_CODEC_DAI))) + return rtd->codec_dai; + } + + return NULL; +} + +static int platform_clock_control(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + int ret = 0; + struct snd_soc_dapm_context *dapm = w->dapm; + struct snd_soc_card *card = dapm->card; + struct snd_soc_dai *codec_dai; + + codec_dai = bxt_get_codec_dai(card); + if (!codec_dai) { + dev_err(card->dev, "Codec dai not found; Unable to set/unset codec pll\n"); + return -EIO; + } + + if (SND_SOC_DAPM_EVENT_OFF(event)) { + ret = snd_soc_dai_set_pll(codec_dai, 0, + DA7219_SYSCLK_MCLK, 0, 0); + if (ret) + dev_err(card->dev, "failed to stop PLL: %d\n", ret); + } else if(SND_SOC_DAPM_EVENT_ON(event)) { + ret = snd_soc_dai_set_sysclk(codec_dai, + DA7219_CLKSRC_MCLK, 19200000, SND_SOC_CLOCK_IN); + if (ret) + dev_err(card->dev, "can't set codec sysclk configuration\n"); + + ret = snd_soc_dai_set_pll(codec_dai, 0, + DA7219_SYSCLK_PLL_SRM, 0, DA7219_PLL_FREQ_OUT_98304); + if (ret) + dev_err(card->dev, "failed to start PLL: %d\n", ret); + } + + return ret; +} + static const struct snd_kcontrol_new broxton_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone Jack"), SOC_DAPM_PIN_SWITCH("Headset Mic"), @@ -69,6 +117,8 @@ static const struct snd_soc_dapm_widget broxton_widgets[] = { SND_SOC_DAPM_SPK("HDMI1", NULL), SND_SOC_DAPM_SPK("HDMI2", NULL), SND_SOC_DAPM_SPK("HDMI3", NULL), + SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, + platform_clock_control, SND_SOC_DAPM_POST_PMD|SND_SOC_DAPM_PRE_PMU), }; static const struct snd_soc_dapm_route broxton_map[] = { @@ -109,6 +159,9 @@ static const struct snd_soc_dapm_route broxton_map[] = { /* DMIC */ {"dmic01_hifi", NULL, "DMIC01 Rx"}, {"DMIC01 Rx", NULL, "DMIC AIF"}, + + { "Headphone Jack", NULL, "Platform Clock" }, + { "Headset Mic", NULL, "Platform Clock" }, }; static int broxton_ssp_fixup(struct snd_soc_pcm_runtime *rtd, @@ -243,49 +296,6 @@ static const struct snd_soc_ops broxton_da7219_fe_ops = { .startup = bxt_fe_startup, }; -static int broxton_da7219_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - int ret; - - ret = snd_soc_dai_set_sysclk(codec_dai, - DA7219_CLKSRC_MCLK, 19200000, SND_SOC_CLOCK_IN); - if (ret < 0) - dev_err(codec_dai->dev, "can't set codec sysclk configuration\n"); - - ret = snd_soc_dai_set_pll(codec_dai, 0, - DA7219_SYSCLK_PLL_SRM, 0, DA7219_PLL_FREQ_OUT_98304); - if (ret < 0) { - dev_err(codec_dai->dev, "failed to start PLL: %d\n", ret); - return -EIO; - } - - return ret; -} - -static int broxton_da7219_hw_free(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - int ret; - - ret = snd_soc_dai_set_pll(codec_dai, 0, - DA7219_SYSCLK_MCLK, 0, 0); - if (ret < 0) { - dev_err(codec_dai->dev, "failed to stop PLL: %d\n", ret); - return -EIO; - } - - return ret; -} - -static const struct snd_soc_ops broxton_da7219_ops = { - .hw_params = broxton_da7219_hw_params, - .hw_free = broxton_da7219_hw_free, -}; - static int broxton_dmic_fixup(struct snd_soc_pcm_runtime *rtd, struct snd_pcm_hw_params *params) { @@ -467,7 +477,6 @@ static struct snd_soc_dai_link broxton_dais[] = { SND_SOC_DAIFMT_CBS_CFS, .ignore_pmdown_time = 1, .be_hw_params_fixup = broxton_ssp_fixup, - .ops = &broxton_da7219_ops, .dpcm_playback = 1, .dpcm_capture = 1, }, -- cgit v1.2.3 From 36d96039e710488b53256defed0fd291e0f1a34b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 27 Mar 2017 10:39:58 +0200 Subject: ASoC: intel: Don't print FW version repeatedly Intel SST driver spews an info message "FW Versoin xxxx" at each time the device gets initialized. Since it's triggered at each PM (or even runtime PM), it appears so ofetn, and rather becomes annoying than useful. This patch suppresses the superfluous messages by checking the currently loaded FW version with the previously loaded one. Signed-off-by: Takashi Iwai Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/atom/sst/sst_ipc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/atom/sst/sst_ipc.c b/sound/soc/intel/atom/sst/sst_ipc.c index 14c2d9d18180..20b01e02ed8f 100644 --- a/sound/soc/intel/atom/sst/sst_ipc.c +++ b/sound/soc/intel/atom/sst/sst_ipc.c @@ -236,7 +236,9 @@ static void process_fw_init(struct intel_sst_drv *sst_drv_ctx, retval = init->result; goto ret; } - dev_info(sst_drv_ctx->dev, "FW Version %02x.%02x.%02x.%02x\n", + if (memcmp(&sst_drv_ctx->fw_version, &init->fw_version, + sizeof(init->fw_version))) + dev_info(sst_drv_ctx->dev, "FW Version %02x.%02x.%02x.%02x\n", init->fw_version.type, init->fw_version.major, init->fw_version.minor, init->fw_version.build); dev_dbg(sst_drv_ctx->dev, "Build date %s Time %s\n", -- cgit v1.2.3 From 74a4ce4c8e13820799911c746b917efd7cc25f55 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 22 Mar 2017 14:36:44 +0000 Subject: ASoC: intel: remove unused variable data and associated code The variable 'data' is assigned null and never re-assigned. There is also a redundant check for data being non-null which is always false, so remove this and the variable data and dma_addr as they are not used once the dead code has been removed. Detected with CoverityScan, CID#1324015 ("'Constant' variable gaurds dead code") Signed-off-by: Colin Ian King Acked-by: Jie Yang Signed-off-by: Mark Brown --- sound/soc/intel/haswell/sst-haswell-ipc.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/haswell/sst-haswell-ipc.c b/sound/soc/intel/haswell/sst-haswell-ipc.c index a3459d1682a6..d33bdaf92c57 100644 --- a/sound/soc/intel/haswell/sst-haswell-ipc.c +++ b/sound/soc/intel/haswell/sst-haswell-ipc.c @@ -2000,10 +2000,8 @@ int sst_hsw_module_set_param(struct sst_hsw *hsw, u32 param_size, char *param) { int ret; - unsigned char *data = NULL; u32 header = 0; u32 payload_size = 0, transfer_parameter_size = 0; - dma_addr_t dma_addr = 0; struct sst_hsw_transfer_parameter *parameter; struct device *dev = hsw->dev; @@ -2047,10 +2045,6 @@ int sst_hsw_module_set_param(struct sst_hsw *hsw, kfree(parameter); - if (data) - dma_free_coherent(hsw->dsp->dma_dev, - param_size, (void *)data, dma_addr); - return ret; } -- cgit v1.2.3 From 7f975a385b9313a03c13fb0be0a129c626f9a54e Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Fri, 24 Mar 2017 23:10:25 +0530 Subject: ASoC: Intel: Skylake: Use the sig_bits to define dai bps capability For calculating the HDA DMA format, use the max_bps supported by the DAI caps instead of fixing it to 32/24. For host DMA the Max bps support is 32, but in case of link DMA, this depends on the codec capability. So use the sig_bits to define the bps supported by dai. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-pcm.c | 25 ++++++++++++++++++++++--- sound/soc/intel/skylake/skl-topology.c | 2 ++ sound/soc/intel/skylake/skl-topology.h | 2 ++ 3 files changed, 26 insertions(+), 3 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 2f90bc40be77..3c61dbab3d4f 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -155,7 +155,7 @@ int skl_pcm_host_dma_prepare(struct device *dev, struct skl_pipe_params *params) snd_hdac_ext_stream_decouple(ebus, stream, true); format_val = snd_hdac_calc_stream_format(params->s_freq, - params->ch, params->format, 32, 0); + params->ch, params->format, params->host_bps, 0); dev_dbg(dev, "format_val=%d, rate=%d, ch=%d, format=%d\n", format_val, params->s_freq, params->ch, params->format); @@ -190,8 +190,8 @@ int skl_pcm_link_dma_prepare(struct device *dev, struct skl_pipe_params *params) stream = stream_to_hdac_ext_stream(hstream); snd_hdac_ext_stream_decouple(ebus, stream, true); - format_val = snd_hdac_calc_stream_format(params->s_freq, - params->ch, params->format, 24, 0); + format_val = snd_hdac_calc_stream_format(params->s_freq, params->ch, + params->format, params->link_bps, 0); dev_dbg(dev, "format_val=%d, rate=%d, ch=%d, format=%d\n", format_val, params->s_freq, params->ch, params->format); @@ -309,6 +309,11 @@ static int skl_pcm_hw_params(struct snd_pcm_substream *substream, p_params.host_dma_id = dma_id; p_params.stream = substream->stream; p_params.format = params_format(params); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + p_params.host_bps = dai->driver->playback.sig_bits; + else + p_params.host_bps = dai->driver->capture.sig_bits; + m_cfg = skl_tplg_fe_get_cpr_module(dai, p_params.stream); if (m_cfg) @@ -547,6 +552,11 @@ static int skl_link_hw_params(struct snd_pcm_substream *substream, p_params.link_index = link->index; p_params.format = params_format(params); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + p_params.link_bps = codec_dai->driver->playback.sig_bits; + else + p_params.link_bps = codec_dai->driver->capture.sig_bits; + return skl_tplg_be_update_params(dai, &p_params); } @@ -652,6 +662,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_8000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE, + .sig_bits = 32, }, .capture = { .stream_name = "System Capture", @@ -659,6 +670,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { .channels_max = HDA_STEREO, .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_16000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE, + .sig_bits = 32, }, }, { @@ -670,6 +682,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { .channels_max = HDA_QUAD, .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_16000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE, + .sig_bits = 32, }, }, { @@ -681,6 +694,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { .channels_max = HDA_STEREO, .rates = SNDRV_PCM_RATE_48000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE, + .sig_bits = 32, }, }, { @@ -692,6 +706,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { .channels_max = HDA_STEREO, .rates = SNDRV_PCM_RATE_48000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE, + .sig_bits = 32, }, }, { @@ -703,6 +718,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { .channels_max = HDA_QUAD, .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_16000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE, + .sig_bits = 32, }, }, { @@ -718,6 +734,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { SNDRV_PCM_RATE_192000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE, + .sig_bits = 32, }, }, { @@ -733,6 +750,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { SNDRV_PCM_RATE_192000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE, + .sig_bits = 32, }, }, { @@ -748,6 +766,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { SNDRV_PCM_RATE_192000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE, + .sig_bits = 32, }, }, diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index c6bd4bb49ec0..43f9cb380a76 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -1242,10 +1242,12 @@ static void skl_tplg_fill_dma_id(struct skl_module_cfg *mcfg, case SKL_DEVICE_HDALINK: pipe->p_params->link_dma_id = params->link_dma_id; pipe->p_params->link_index = params->link_index; + pipe->p_params->link_bps = params->link_bps; break; case SKL_DEVICE_HDAHOST: pipe->p_params->host_dma_id = params->host_dma_id; + pipe->p_params->host_bps = params->host_bps; break; default: diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h index fefab0e99a3b..bf2c63b4ab83 100644 --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -257,6 +257,8 @@ struct skl_pipe_params { snd_pcm_format_t format; int link_index; int stream; + unsigned int host_bps; + unsigned int link_bps; }; struct skl_pipe { -- cgit v1.2.3 From 66d6bbc6c0beb04c1dfeb0107d4d828f3e1959ee Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Fri, 24 Mar 2017 23:10:26 +0530 Subject: ASoC: hdac_hdmi: Update sig_bits based on converter capability When creating the codec dai, use sig_bits to update the max bps based on the codec capability. So both the link DMA and codec format will be calculated based on DAI sig_bits. So update the sig_bits with converter capability and use the sig_bits for HDA format calculation. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/codecs/hdac_hdmi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index 78fca8acd3ec..5b7694721ef7 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -469,7 +469,7 @@ static int hdac_hdmi_set_hw_params(struct snd_pcm_substream *substream, format = snd_hdac_calc_stream_format(params_rate(hparams), params_channels(hparams), params_format(hparams), - 24, 0); + dai->driver->playback.sig_bits, 0); pcm = hdac_hdmi_get_pcm_from_cvt(hdmi, dai_map->cvt); if (!pcm) @@ -1419,8 +1419,8 @@ static int hdac_hdmi_create_dais(struct hdac_device *hdac, hdmi_dais[i].playback.rate_min = rate_min; hdmi_dais[i].playback.channels_min = 2; hdmi_dais[i].playback.channels_max = 2; + hdmi_dais[i].playback.sig_bits = bps; hdmi_dais[i].ops = &hdmi_dai_ops; - i++; } -- cgit v1.2.3 From e59ed0875b0681ebd1e5062b739742f98f24274c Mon Sep 17 00:00:00 2001 From: G Kranthi Date: Fri, 24 Mar 2017 23:10:27 +0530 Subject: ASoC: Intel: Skylake: Add 16-bit constraint to FE bxt_rt298 machine Add constraint to FE to restrict sample format to 16-bit for bxt_rt298 machine Signed-off-by: G Kranthi Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/boards/bxt_rt298.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'sound/soc') diff --git a/sound/soc/intel/boards/bxt_rt298.c b/sound/soc/intel/boards/bxt_rt298.c index 176c080a9818..1a68d043c803 100644 --- a/sound/soc/intel/boards/bxt_rt298.c +++ b/sound/soc/intel/boards/bxt_rt298.c @@ -274,12 +274,15 @@ static int bxt_fe_startup(struct snd_pcm_substream *substream) * on this platform for PCM device we support: * 48Khz * stereo + * 16-bit audio */ runtime->hw.channels_max = 2; snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, &constraints_channels); + runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE; + snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16); snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &constraints_rates); -- cgit v1.2.3 From f7ea77772dfaa404ac0bcdea5c262c24e8b860db Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Fri, 24 Mar 2017 23:10:28 +0530 Subject: ASoC: Intel: Skylake: Don't unload module when in use A module may have multiple instances in DSP, so unload only when usage count is zero. Signed-off-by: Vinod Koul Signed-off-by: Jeeja KP Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-sst.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-sst.c b/sound/soc/intel/skylake/skl-sst.c index 39d4aaac73bf..539529729e3f 100644 --- a/sound/soc/intel/skylake/skl-sst.c +++ b/sound/soc/intel/skylake/skl-sst.c @@ -417,6 +417,11 @@ static int skl_unload_module(struct sst_dsp *ctx, u16 mod_id) dev_err(ctx->dev, "Module bad usage cnt!:%d\n", usage_cnt); return -EIO; } + + /* if module is used by others return, no need to unload */ + if (usage_cnt > 0) + return 0; + ret = skl_ipc_unload_modules(&skl->ipc, SKL_NUM_MODULES, &mod_id); if (ret < 0) { -- cgit v1.2.3 From 9a1e350709492cf512a3c4781915d567b34f8d26 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Fri, 24 Mar 2017 23:10:29 +0530 Subject: ASoC: Intel: Skylake: Remove redundant vmixer handler Initially vmixer and mixer widget handlers were bit different, but over time they became same so remove the duplicate code. Signed-off-by: Vinod Koul Signed-off-by: Jeeja KP Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 32 +------------------------------- 1 file changed, 1 insertion(+), 31 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 43f9cb380a76..35d9d7b43dd2 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -1072,36 +1072,6 @@ static int skl_tplg_pga_dapm_post_pmd_event(struct snd_soc_dapm_widget *w, return ret; } -/* - * In modelling, we assume there will be ONLY one mixer in a pipeline. If - * mixer is not required then it is treated as static mixer aka vmixer with - * a hard path to source module - * So we don't need to check if source is started or not as hard path puts - * dependency on each other - */ -static int skl_tplg_vmixer_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, int event) -{ - struct snd_soc_dapm_context *dapm = w->dapm; - struct skl *skl = get_skl_ctx(dapm->dev); - - switch (event) { - case SND_SOC_DAPM_PRE_PMU: - return skl_tplg_mixer_dapm_pre_pmu_event(w, skl); - - case SND_SOC_DAPM_POST_PMU: - return skl_tplg_mixer_dapm_post_pmu_event(w, skl); - - case SND_SOC_DAPM_PRE_PMD: - return skl_tplg_mixer_dapm_pre_pmd_event(w, skl); - - case SND_SOC_DAPM_POST_PMD: - return skl_tplg_mixer_dapm_post_pmd_event(w, skl); - } - - return 0; -} - /* * In modelling, we assume there will be ONLY one mixer in a pipeline. If a * second one is required that is created as another pipe entity. @@ -1570,7 +1540,7 @@ int skl_tplg_be_update_params(struct snd_soc_dai *dai, static const struct snd_soc_tplg_widget_events skl_tplg_widget_ops[] = { {SKL_MIXER_EVENT, skl_tplg_mixer_event}, - {SKL_VMIXER_EVENT, skl_tplg_vmixer_event}, + {SKL_VMIXER_EVENT, skl_tplg_mixer_event}, {SKL_PGA_EVENT, skl_tplg_pga_event}, }; -- cgit v1.2.3 From 6ad0005f179fded911e69f54f96c03e5f8cbf67a Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Fri, 24 Mar 2017 23:10:30 +0530 Subject: ASoC: Intel: Skylake: remove hard coded ACPI path We should not hard code the ACPI path to get acpi_handle. Instead use ACPI_HANDLE macro to do the job. Signed-off-by: Vinod Koul Signed-off-by: Jeeja KP Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-nhlt.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-nhlt.c b/sound/soc/intel/skylake/skl-nhlt.c index 7eb9c419dc7f..e3f06672fd6d 100644 --- a/sound/soc/intel/skylake/skl-nhlt.c +++ b/sound/soc/intel/skylake/skl-nhlt.c @@ -24,8 +24,6 @@ static u8 OSC_UUID[16] = {0x6E, 0x88, 0x9F, 0xA6, 0xEB, 0x6C, 0x94, 0x45, 0xA4, 0x1F, 0x7B, 0x5D, 0xCE, 0x24, 0xC5, 0x53}; -#define DSDT_NHLT_PATH "\\_SB.PCI0.HDAS" - struct nhlt_acpi_table *skl_nhlt_init(struct device *dev) { acpi_handle handle; @@ -33,8 +31,9 @@ struct nhlt_acpi_table *skl_nhlt_init(struct device *dev) struct nhlt_resource_desc *nhlt_ptr = NULL; struct nhlt_acpi_table *nhlt_table = NULL; - if (ACPI_FAILURE(acpi_get_handle(NULL, DSDT_NHLT_PATH, &handle))) { - dev_err(dev, "Requested NHLT device not found\n"); + handle = ACPI_HANDLE(dev); + if (!handle) { + dev_err(dev, "Didn't find ACPI_HANDLE\n"); return NULL; } -- cgit v1.2.3 From b26199eae86f7a1c2363d049249c3be33694f93b Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Fri, 24 Mar 2017 23:10:31 +0530 Subject: ASoC: Intel: Skylake: Rearrangement of code to cleanup SKL SST library Skylake driver topology header/driver structure is referenced and used in SST library which creates circular dependency. Hence the rearrangement. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-pcm.c | 35 +++++++++++++++---- sound/soc/intel/skylake/skl-sst-dsp.h | 24 +++++++++---- sound/soc/intel/skylake/skl-sst-ipc.h | 8 +++++ sound/soc/intel/skylake/skl-sst-utils.c | 60 +++++---------------------------- sound/soc/intel/skylake/skl-topology.c | 11 ++++-- sound/soc/intel/skylake/skl-topology.h | 13 ------- 6 files changed, 70 insertions(+), 81 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 3c61dbab3d4f..ef440d8629e8 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1174,29 +1174,52 @@ static int skl_pcm_new(struct snd_soc_pcm_runtime *rtd) return retval; } +static int skl_get_module_info(struct skl *skl, struct skl_module_cfg *mconfig) +{ + struct skl_sst *ctx = skl->skl_sst; + struct uuid_module *module; + uuid_le *uuid_mod; + + uuid_mod = (uuid_le *)mconfig->guid; + + if (list_empty(&ctx->uuid_list)) { + dev_err(ctx->dev, "Module list is empty\n"); + return -EIO; + } + + list_for_each_entry(module, &ctx->uuid_list, list) { + if (uuid_le_cmp(*uuid_mod, module->uuid) == 0) { + mconfig->id.module_id = module->id; + mconfig->is_loadable = module->is_loadable; + return 0; + } + } + + return -EIO; +} + static int skl_populate_modules(struct skl *skl) { struct skl_pipeline *p; struct skl_pipe_module *m; struct snd_soc_dapm_widget *w; struct skl_module_cfg *mconfig; - int ret; + int ret = 0; list_for_each_entry(p, &skl->ppl_list, node) { list_for_each_entry(m, &p->pipe->w_list, node) { - w = m->w; mconfig = w->priv; - ret = snd_skl_get_module_info(skl->skl_sst, mconfig); + ret = skl_get_module_info(skl, mconfig); if (ret < 0) { dev_err(skl->skl_sst->dev, - "query module info failed:%d\n", ret); - goto err; + "query module info failed\n"); + return ret; } } } -err: + return ret; } diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h index 5d7a93aa5bed..7229a12b4c94 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -17,13 +17,14 @@ #define __SKL_SST_DSP_H__ #include +#include #include #include "skl-sst-cldma.h" -#include "skl-topology.h" struct sst_dsp; struct skl_sst; struct sst_dsp_device; +struct skl_lib_info; /* Intel HD Audio General DSP Registers */ #define SKL_ADSP_GEN_BASE 0x0 @@ -172,6 +173,19 @@ struct skl_dsp_loader_ops { int stream_tag); }; +#define MAX_INSTANCE_BUFF 2 + +struct uuid_module { + uuid_le uuid; + int id; + int is_loadable; + int max_instance; + u64 pvt_id[MAX_INSTANCE_BUFF]; + int *instance_id; + + struct list_head list; +}; + struct skl_load_module_info { u16 mod_id; const struct firmware *fw; @@ -223,14 +237,10 @@ int bxt_sst_init_fw(struct device *dev, struct skl_sst *ctx); void skl_sst_dsp_cleanup(struct device *dev, struct skl_sst *ctx); void bxt_sst_dsp_cleanup(struct device *dev, struct skl_sst *ctx); -int snd_skl_get_module_info(struct skl_sst *ctx, - struct skl_module_cfg *mconfig); int snd_skl_parse_uuids(struct sst_dsp *ctx, const struct firmware *fw, unsigned int offset, int index); -int skl_get_pvt_id(struct skl_sst *ctx, - struct skl_module_cfg *mconfig); -int skl_put_pvt_id(struct skl_sst *ctx, - struct skl_module_cfg *mconfig); +int skl_get_pvt_id(struct skl_sst *ctx, uuid_le *uuid_mod, int instance_id); +int skl_put_pvt_id(struct skl_sst *ctx, uuid_le *uuid_mod, int *pvt_id); int skl_get_pvt_instance_id_map(struct skl_sst *ctx, int module_id, int instance_id); void skl_freeup_uuid_list(struct skl_sst *ctx); diff --git a/sound/soc/intel/skylake/skl-sst-ipc.h b/sound/soc/intel/skylake/skl-sst-ipc.h index fc07c397b060..4abf98c0e00e 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.h +++ b/sound/soc/intel/skylake/skl-sst-ipc.h @@ -69,6 +69,14 @@ struct skl_d0i3_data { struct delayed_work work; }; +#define SKL_LIB_NAME_LENGTH 128 +#define SKL_MAX_LIB 16 + +struct skl_lib_info { + char name[SKL_LIB_NAME_LENGTH]; + const struct firmware *fw; +}; + struct skl_sst { struct device *dev; struct sst_dsp *dsp; diff --git a/sound/soc/intel/skylake/skl-sst-utils.c b/sound/soc/intel/skylake/skl-sst-utils.c index ea162fbf68e5..6d5bff04bf65 100644 --- a/sound/soc/intel/skylake/skl-sst-utils.c +++ b/sound/soc/intel/skylake/skl-sst-utils.c @@ -94,19 +94,6 @@ struct adsp_fw_hdr { u32 load_offset; } __packed; -#define MAX_INSTANCE_BUFF 2 - -struct uuid_module { - uuid_le uuid; - int id; - int is_loadable; - int max_instance; - u64 pvt_id[MAX_INSTANCE_BUFF]; - int *instance_id; - - struct list_head list; -}; - struct skl_ext_manifest_hdr { u32 id; u32 len; @@ -115,32 +102,6 @@ struct skl_ext_manifest_hdr { u32 entries; }; -int snd_skl_get_module_info(struct skl_sst *ctx, - struct skl_module_cfg *mconfig) -{ - struct uuid_module *module; - uuid_le *uuid_mod; - - uuid_mod = (uuid_le *)mconfig->guid; - - if (list_empty(&ctx->uuid_list)) { - dev_err(ctx->dev, "Module list is empty\n"); - return -EINVAL; - } - - list_for_each_entry(module, &ctx->uuid_list, list) { - if (uuid_le_cmp(*uuid_mod, module->uuid) == 0) { - mconfig->id.module_id = module->id; - mconfig->is_loadable = module->is_loadable; - - return 0; - } - } - - return -EINVAL; -} -EXPORT_SYMBOL_GPL(snd_skl_get_module_info); - static int skl_get_pvtid_map(struct uuid_module *module, int instance_id) { int pvt_id; @@ -222,21 +183,18 @@ static inline int skl_pvtid_128(struct uuid_module *module) * This generates a 128 bit private unique id for a module TYPE so that * module instance is unique */ -int skl_get_pvt_id(struct skl_sst *ctx, struct skl_module_cfg *mconfig) +int skl_get_pvt_id(struct skl_sst *ctx, uuid_le *uuid_mod, int instance_id) { struct uuid_module *module; - uuid_le *uuid_mod; int pvt_id; - uuid_mod = (uuid_le *)mconfig->guid; - list_for_each_entry(module, &ctx->uuid_list, list) { if (uuid_le_cmp(*uuid_mod, module->uuid) == 0) { pvt_id = skl_pvtid_128(module); if (pvt_id >= 0) { - module->instance_id[pvt_id] = - mconfig->id.instance_id; + module->instance_id[pvt_id] = instance_id; + return pvt_id; } } @@ -254,23 +212,21 @@ EXPORT_SYMBOL_GPL(skl_get_pvt_id); * * This frees a 128 bit private unique id previously generated */ -int skl_put_pvt_id(struct skl_sst *ctx, struct skl_module_cfg *mconfig) +int skl_put_pvt_id(struct skl_sst *ctx, uuid_le *uuid_mod, int *pvt_id) { int i; - uuid_le *uuid_mod; struct uuid_module *module; - uuid_mod = (uuid_le *)mconfig->guid; list_for_each_entry(module, &ctx->uuid_list, list) { if (uuid_le_cmp(*uuid_mod, module->uuid) == 0) { - if (mconfig->id.pvt_id != 0) - i = (mconfig->id.pvt_id) / 64; + if (*pvt_id != 0) + i = (*pvt_id) / 64; else i = 0; - module->pvt_id[i] &= ~(1 << (mconfig->id.pvt_id)); - mconfig->id.pvt_id = -1; + module->pvt_id[i] &= ~(1 << (*pvt_id)); + *pvt_id = -1; return 0; } } diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 35d9d7b43dd2..8bd5ded98cec 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -539,6 +539,7 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe) int ret = 0; list_for_each_entry(w_module, &pipe->w_list, node) { + uuid_le *uuid_mod; w = w_module->w; mconfig = w->priv; @@ -576,13 +577,15 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe) * FE/BE params */ skl_tplg_update_module_params(w, ctx); - mconfig->id.pvt_id = skl_get_pvt_id(ctx, mconfig); + uuid_mod = (uuid_le *)mconfig->guid; + mconfig->id.pvt_id = skl_get_pvt_id(ctx, uuid_mod, + mconfig->id.instance_id); if (mconfig->id.pvt_id < 0) return ret; skl_tplg_set_module_init_data(w); ret = skl_init_module(ctx, mconfig); if (ret < 0) { - skl_put_pvt_id(ctx, mconfig); + skl_put_pvt_id(ctx, uuid_mod, &mconfig->id.pvt_id); return ret; } skl_tplg_alloc_pipe_mcps(skl, mconfig); @@ -602,7 +605,9 @@ static int skl_tplg_unload_pipe_modules(struct skl_sst *ctx, struct skl_module_cfg *mconfig = NULL; list_for_each_entry(w_module, &pipe->w_list, node) { + uuid_le *uuid_mod; mconfig = w_module->w->priv; + uuid_mod = (uuid_le *)mconfig->guid; if (mconfig->is_loadable && ctx->dsp->fw_ops.unload_mod && mconfig->m_state > SKL_MODULE_UNINIT) { @@ -611,7 +616,7 @@ static int skl_tplg_unload_pipe_modules(struct skl_sst *ctx, if (ret < 0) return -EIO; } - skl_put_pvt_id(ctx, mconfig); + skl_put_pvt_id(ctx, uuid_mod, &mconfig->id.pvt_id); } /* no modules to unload in this path, so return */ diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h index bf2c63b4ab83..8536d03a7778 100644 --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -336,19 +336,6 @@ struct skl_pipeline { struct list_head node; }; -#define SKL_LIB_NAME_LENGTH 128 -#define SKL_MAX_LIB 16 - -struct skl_lib_info { - char name[SKL_LIB_NAME_LENGTH]; - const struct firmware *fw; -}; - -struct skl_manifest { - u32 lib_count; - struct skl_lib_info lib[SKL_MAX_LIB]; -}; - static inline struct skl *get_skl_ctx(struct device *dev) { struct hdac_ext_bus *ebus = dev_get_drvdata(dev); -- cgit v1.2.3 From fdd85a054b850db43c6abe39c1da28b581be5e93 Mon Sep 17 00:00:00 2001 From: Hardik T Shah Date: Fri, 24 Mar 2017 23:10:32 +0530 Subject: ASoC: Intel: Skylake: Fix DMA position reporting for capture stream As per hardware recommendation, for every capture stream completion following operations need to be done in order to reflect the actual data that is received in position buffer. 1. Wait for 20us before reading the DMA position in buffer once the interrupt is generated for stream completion. 2. Read any of the register to flush the DMA position value. This is dummy read operation. Signed-off-by: Dharageswari R Signed-off-by: Hardik T Shah Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-pcm.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index ef440d8629e8..1823197c15c8 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include "skl.h" @@ -1063,13 +1064,31 @@ static snd_pcm_uframes_t skl_platform_pcm_pointer * HAD space reflects the actual data that is transferred. * Use the position buffer for capture, as DPIB write gets * completed earlier than the actual data written to the DDR. + * + * For capture stream following workaround is required to fix the + * incorrect position reporting. + * + * 1. Wait for 20us before reading the DMA position in buffer once + * the interrupt is generated for stream completion as update happens + * on the HDA frame boundary i.e. 20.833uSec. + * 2. Read DPIB register to flush the DMA position value. This dummy + * read is required to flush DMA position value. + * 3. Read the DMA Position-in-Buffer. This value now will be equal to + * or greater than period boundary. */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { pos = readl(ebus->bus.remap_addr + AZX_REG_VS_SDXDPIB_XBASE + (AZX_REG_VS_SDXDPIB_XINTERVAL * hdac_stream(hstream)->index)); - else + } else { + udelay(20); + readl(ebus->bus.remap_addr + + AZX_REG_VS_SDXDPIB_XBASE + + (AZX_REG_VS_SDXDPIB_XINTERVAL * + hdac_stream(hstream)->index)); pos = snd_hdac_stream_get_pos_posbuf(hdac_stream(hstream)); + } if (pos >= hdac_stream(hstream)->bufsize) pos = 0; -- cgit v1.2.3 From 473a4d516cfe6d0668cf7223aa3002ae8367349b Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Fri, 24 Mar 2017 23:10:33 +0530 Subject: ASoC: Intel: Skylake: Fix module state after unbind and delete When DSP module is unbound, the module state needs to be in INIT_DONE state instead of UNINT. Also the state needs to be set to UNINIT after module is deleted from DSP pipeline. So, set the module state to INIT_DONE after unbind and then UNINIT after module is deleted. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-messages.c | 2 +- sound/soc/intel/skylake/skl-topology.c | 5 +++++ 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index ba1ec973ded7..09730dd8e6a3 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -862,7 +862,7 @@ static void skl_clear_module_state(struct skl_module_pin *mpin, int max, } if (!found) - mcfg->m_state = SKL_MODULE_UNINIT; + mcfg->m_state = SKL_MODULE_INIT_DONE; return; } diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 8bd5ded98cec..e960d9f761b9 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -1037,6 +1037,11 @@ static int skl_tplg_mixer_dapm_post_pmd_event(struct snd_soc_dapm_widget *w, skl_delete_pipe(ctx, mconfig->pipe); + list_for_each_entry(w_module, &s_pipe->w_list, node) { + src_module = w_module->w->priv; + src_module->m_state = SKL_MODULE_UNINIT; + } + return skl_tplg_unload_pipe_modules(ctx, s_pipe); } -- cgit v1.2.3 From 5f75b19ef99054736aa80b70dbdf2f7a86a22007 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 30 Mar 2017 11:09:34 +0100 Subject: ASoC: Intel: bxtn: fix spelling mistake: "Timout" -> "Timeout" trivial fix to spelling mistake in dev_err error message Signed-off-by: Colin Ian King Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 600d95891996..268bdaec8042 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -171,7 +171,7 @@ static int sst_bxt_prepare_fw(struct sst_dsp *ctx, SKL_ADSP_REG_HIPCIE_DONE, BXT_INIT_TIMEOUT, "HIPCIE Done"); if (ret < 0) { - dev_err(ctx->dev, "Timout for Purge Request%d\n", ret); + dev_err(ctx->dev, "Timeout for Purge Request%d\n", ret); goto base_fw_load_failed; } -- cgit v1.2.3 From b8c722ddd548186db3f62e64f727af4db1cf9517 Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Fri, 24 Mar 2017 23:10:34 +0530 Subject: ASoC: Intel: Skylake: Add support for deferred DSP module bind Module at the end of DSP pipeline that needs to be connected to a module in another pipeline are represented as a PGA(leaf node) and in PGA event handler these modules are bound/unbounded. Modules other than PGA leaf can be connected directly or via switch to a module in another pipeline. Example: reference path. To support the deferred DSP module bind, following changes are done: o When the path is enabled, the destination module that needs to be bound may not be initialized. If the module is not initialized, add these modules in a deferred bind list. o When the destination module is initialized, check for these modules in deferred bind list. If found, bind them. o When the destination module is deleted, Unbind the modules. o When the source module is deleted, remove the entry from the deferred bind list. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-pcm.c | 12 ++++ sound/soc/intel/skylake/skl-topology.c | 109 ++++++++++++++++++++++++++++++++- sound/soc/intel/skylake/skl-topology.h | 6 ++ sound/soc/intel/skylake/skl.h | 1 + 4 files changed, 127 insertions(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 1823197c15c8..600faad19bd4 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1300,6 +1300,7 @@ int skl_platform_register(struct device *dev) struct skl *skl = ebus_to_skl(ebus); INIT_LIST_HEAD(&skl->ppl_list); + INIT_LIST_HEAD(&skl->bind_list); ret = snd_soc_register_platform(dev, &skl_platform_drv); if (ret) { @@ -1320,6 +1321,17 @@ int skl_platform_register(struct device *dev) int skl_platform_unregister(struct device *dev) { + struct hdac_ext_bus *ebus = dev_get_drvdata(dev); + struct skl *skl = ebus_to_skl(ebus); + struct skl_module_deferred_bind *modules; + + if (!list_empty(&skl->bind_list)) { + list_for_each_entry(modules, &skl->bind_list, node) { + list_del(&modules->node); + kfree(modules); + } + } + snd_soc_unregister_component(dev); snd_soc_unregister_platform(dev); return 0; diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index e960d9f761b9..7f285176a074 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -638,8 +638,9 @@ static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w, struct skl_module_cfg *mconfig = w->priv; struct skl_pipe_module *w_module; struct skl_pipe *s_pipe = mconfig->pipe; - struct skl_module_cfg *src_module = NULL, *dst_module; + struct skl_module_cfg *src_module = NULL, *dst_module, *module; struct skl_sst *ctx = skl->skl_sst; + struct skl_module_deferred_bind *modules; /* check resource available */ if (!skl_is_pipe_mcps_avail(skl, mconfig)) @@ -680,6 +681,22 @@ static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w, src_module = dst_module; } + /* + * When the destination module is initialized, check for these modules + * in deferred bind list. If found, bind them. + */ + list_for_each_entry(w_module, &s_pipe->w_list, node) { + if (list_empty(&skl->bind_list)) + break; + + list_for_each_entry(modules, &skl->bind_list, node) { + module = w_module->w->priv; + if (modules->dst == module) + skl_bind_modules(ctx, modules->src, + modules->dst); + } + } + return 0; } @@ -776,6 +793,44 @@ static int skl_tplg_set_module_bind_params(struct snd_soc_dapm_widget *w, return 0; } + +static int skl_tplg_module_add_deferred_bind(struct skl *skl, + struct skl_module_cfg *src, struct skl_module_cfg *dst) +{ + struct skl_module_deferred_bind *m_list, *modules; + int i; + + /* only supported for module with static pin connection */ + for (i = 0; i < dst->max_in_queue; i++) { + struct skl_module_pin *pin = &dst->m_in_pin[i]; + + if (pin->is_dynamic) + continue; + + if ((pin->id.module_id == src->id.module_id) && + (pin->id.instance_id == src->id.instance_id)) { + + if (!list_empty(&skl->bind_list)) { + list_for_each_entry(modules, &skl->bind_list, node) { + if (modules->src == src && modules->dst == dst) + return 0; + } + } + + m_list = kzalloc(sizeof(*m_list), GFP_KERNEL); + if (!m_list) + return -ENOMEM; + + m_list->src = src; + m_list->dst = dst; + + list_add(&m_list->node, &skl->bind_list); + } + } + + return 0; +} + static int skl_tplg_bind_sinks(struct snd_soc_dapm_widget *w, struct skl *skl, struct snd_soc_dapm_widget *src_w, @@ -810,6 +865,28 @@ static int skl_tplg_bind_sinks(struct snd_soc_dapm_widget *w, sink = p->sink; sink_mconfig = sink->priv; + /* + * Modules other than PGA leaf can be connected + * directly or via switch to a module in another + * pipeline. EX: reference path + * when the path is enabled, the dst module that needs + * to be bound may not be initialized. if the module is + * not initialized, add these modules in the deferred + * bind list and when the dst module is initialised, + * bind this module to the dst_module in deferred list. + */ + if (((src_mconfig->m_state == SKL_MODULE_INIT_DONE) + && (sink_mconfig->m_state == SKL_MODULE_UNINIT))) { + + ret = skl_tplg_module_add_deferred_bind(skl, + src_mconfig, sink_mconfig); + + if (ret < 0) + return ret; + + } + + if (src_mconfig->m_state == SKL_MODULE_UNINIT || sink_mconfig->m_state == SKL_MODULE_UNINIT) continue; @@ -1014,6 +1091,7 @@ static int skl_tplg_mixer_dapm_post_pmd_event(struct snd_soc_dapm_widget *w, struct skl_module_cfg *src_module = NULL, *dst_module; struct skl_sst *ctx = skl->skl_sst; struct skl_pipe *s_pipe = mconfig->pipe; + struct skl_module_deferred_bind *modules; if (s_pipe->state == SKL_PIPE_INVALID) return -EINVAL; @@ -1021,6 +1099,35 @@ static int skl_tplg_mixer_dapm_post_pmd_event(struct snd_soc_dapm_widget *w, skl_tplg_free_pipe_mcps(skl, mconfig); skl_tplg_free_pipe_mem(skl, mconfig); + list_for_each_entry(w_module, &s_pipe->w_list, node) { + if (list_empty(&skl->bind_list)) + break; + + src_module = w_module->w->priv; + + list_for_each_entry(modules, &skl->bind_list, node) { + /* + * When the destination module is deleted, Unbind the + * modules from deferred bind list. + */ + if (modules->dst == src_module) { + skl_unbind_modules(ctx, modules->src, + modules->dst); + } + + /* + * When the source module is deleted, remove this entry + * from the deferred bind list. + */ + if (modules->src == src_module) { + list_del(&modules->node); + modules->src = NULL; + modules->dst = NULL; + kfree(modules); + } + } + } + list_for_each_entry(w_module, &s_pipe->w_list, node) { dst_module = w_module->w->priv; diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h index 8536d03a7778..cc64d6bdb4f6 100644 --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -336,6 +336,12 @@ struct skl_pipeline { struct list_head node; }; +struct skl_module_deferred_bind { + struct skl_module_cfg *src; + struct skl_module_cfg *dst; + struct list_head node; +}; + static inline struct skl *get_skl_ctx(struct device *dev) { struct hdac_ext_bus *ebus = dev_get_drvdata(dev); diff --git a/sound/soc/intel/skylake/skl.h b/sound/soc/intel/skylake/skl.h index bbef77d2b917..5b3fa4b91691 100644 --- a/sound/soc/intel/skylake/skl.h +++ b/sound/soc/intel/skylake/skl.h @@ -77,6 +77,7 @@ struct skl { struct skl_dsp_resource resource; struct list_head ppl_list; + struct list_head bind_list; const char *fw_name; char tplg_name[64]; -- cgit v1.2.3 From beb5989a8c6c6867b4e873cca2a66d31f977368f Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 17 Apr 2017 10:04:07 -0500 Subject: ASoC: Intel: Atom: update Thinkpad 10 quirk There are multiple skews of the same Lenovo audio hardware based on the Realtek RT5670 codec. Manufacturer: LENOVO Product Name: 20C1CTO1WW Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C3001VHH Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C10024GE Version: ThinkPad Tablet B Manufacturer: LENOVO Product Name: 20359 Version: Lenovo Miix 2 10 For all these devices, the same quirk is used to force the machine driver to be based on RT5670 instead of RT5640 as indicated by the BIOS. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691 Tested-by: Nicole Faerber Tested-by: Viacheslav Ostroukh Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/atom/sst/sst_acpi.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index 18fe46ef6ac7..dd250b8b26f2 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -420,7 +420,21 @@ static const struct dmi_system_id byt_table[] = { .callback = byt_thinkpad10_quirk_cb, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_NAME, "20C3001VHH"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 10"), + }, + }, + { + .callback = byt_thinkpad10_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Tablet B"), + }, + }, + { + .callback = byt_thinkpad10_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Miix 2 10"), }, }, { } -- cgit v1.2.3 From 67e03ff3f32ffeb8f425d80627f3054b60bac0b7 Mon Sep 17 00:00:00 2001 From: Nicole Faerber Date: Mon, 17 Apr 2017 10:04:08 -0500 Subject: ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirk The Thinkpad Tablet tablet has a similar audio setup as the Intel Braswell platform. A quirk is needed to detect the platform and setup the platform data properly: Manufacturer: LENOVO Product Name: 20C1CTO1WW Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C3001VHH Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C10024GE Version: ThinkPad Tablet B Manufacturer: LENOVO Product Name: 20359 Version: Lenovo Miix 2 10 Signed-off-by: Nicole Faerber Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/codecs/rt5670.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'sound/soc') diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c index 17d20b99f041..e27c5a4a0a15 100644 --- a/sound/soc/codecs/rt5670.c +++ b/sound/soc/codecs/rt5670.c @@ -2835,6 +2835,27 @@ static const struct dmi_system_id dmi_platform_intel_braswell[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Wyse 3040"), }, }, + { + .ident = "Lenovo Thinkpad Tablet 10", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 10"), + }, + }, + { + .ident = "Lenovo Thinkpad Tablet 10", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Tablet B"), + }, + }, + { + .ident = "Lenovo Thinkpad Tablet 10", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Miix 2 10"), + }, + }, {} }; -- cgit v1.2.3 From e6a33532affd14c12688c0e9b2e773e8b2550f3b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 20 Apr 2017 13:17:02 +0300 Subject: ASoC: Intel: Skylake: Uninitialized variable in probe_codec() My static checker complains that if snd_hdac_bus_get_response() returns -EIO then "res" is uninitialized. Fix this by initializing it to -1 so that the error is handled correctly. Fixes: d8c2dab8381d ("ASoC: Intel: Add Skylake HDA audio driver") Signed-off-by: Dan Carpenter Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 0c57d4eaae3a..6df3b317a476 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -512,7 +512,7 @@ static int probe_codec(struct hdac_ext_bus *ebus, int addr) struct hdac_bus *bus = ebus_to_hbus(ebus); unsigned int cmd = (addr << 28) | (AC_NODE_ROOT << 20) | (AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID; - unsigned int res; + unsigned int res = -1; mutex_lock(&bus->cmd_mutex); snd_hdac_bus_send_cmd(bus, cmd); -- cgit v1.2.3 From 550b349af0f0e33fedb252aca8dc144299aca308 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 14 Apr 2017 22:11:20 +0300 Subject: ASoC: Intel: Skylake: Fix a couple user after free bugs We need to use the _safe() version of list_for_each_entry() here because of the kfree(modules). Fixes: b8c722ddd548 ("ASoC: Intel: Skylake: Add support for deferred DSP module bind") Signed-off-by: Dan Carpenter Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-pcm.c | 4 ++-- sound/soc/intel/skylake/skl-topology.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 600faad19bd4..d43d1976dd3b 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1323,10 +1323,10 @@ int skl_platform_unregister(struct device *dev) { struct hdac_ext_bus *ebus = dev_get_drvdata(dev); struct skl *skl = ebus_to_skl(ebus); - struct skl_module_deferred_bind *modules; + struct skl_module_deferred_bind *modules, *tmp; if (!list_empty(&skl->bind_list)) { - list_for_each_entry(modules, &skl->bind_list, node) { + list_for_each_entry_safe(modules, tmp, &skl->bind_list, node) { list_del(&modules->node); kfree(modules); } diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 7f285176a074..0e459d3eb17a 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -1091,7 +1091,7 @@ static int skl_tplg_mixer_dapm_post_pmd_event(struct snd_soc_dapm_widget *w, struct skl_module_cfg *src_module = NULL, *dst_module; struct skl_sst *ctx = skl->skl_sst; struct skl_pipe *s_pipe = mconfig->pipe; - struct skl_module_deferred_bind *modules; + struct skl_module_deferred_bind *modules, *tmp; if (s_pipe->state == SKL_PIPE_INVALID) return -EINVAL; @@ -1105,7 +1105,7 @@ static int skl_tplg_mixer_dapm_post_pmd_event(struct snd_soc_dapm_widget *w, src_module = w_module->w->priv; - list_for_each_entry(modules, &skl->bind_list, node) { + list_for_each_entry_safe(modules, tmp, &skl->bind_list, node) { /* * When the destination module is deleted, Unbind the * modules from deferred bind list. -- cgit v1.2.3 From 1f5a4535db41bd2bb8d1a15f098cb2921d6c1317 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 24 Apr 2017 08:54:41 +0200 Subject: ASoC: Provide a dummy wrapper of snd_soc_set_dmi_name() For systems without DMI, it makes no sense to have the code. Signed-off-by: Takashi Iwai Acked-by: Liam Girdwood Acked-by: Vinod Koul Signed-off-by: Mark Brown --- include/sound/soc.h | 8 ++++++++ sound/soc/soc-core.c | 2 ++ 2 files changed, 10 insertions(+) (limited to 'sound/soc') diff --git a/include/sound/soc.h b/include/sound/soc.h index cdfb55f7aede..915c06cb2b32 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -497,7 +497,15 @@ void snd_soc_runtime_deactivate(struct snd_soc_pcm_runtime *rtd, int stream); int snd_soc_runtime_set_dai_fmt(struct snd_soc_pcm_runtime *rtd, unsigned int dai_fmt); +#ifdef CONFIG_DMI int snd_soc_set_dmi_name(struct snd_soc_card *card, const char *flavour); +#else +static inline int snd_soc_set_dmi_name(struct snd_soc_card *card, + const char *flavour) +{ + return 0; +} +#endif /* Utility functions to get clock rates from various things */ int snd_soc_calc_frame_size(int sample_size, int channels, int tdm_slots); diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 6dca408faae3..52f6d9c28df9 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1918,6 +1918,7 @@ int snd_soc_runtime_set_dai_fmt(struct snd_soc_pcm_runtime *rtd, EXPORT_SYMBOL_GPL(snd_soc_runtime_set_dai_fmt); +#ifdef CONFIG_DMI /* Trim special characters, and replace '-' with '_' since '-' is used to * separate different DMI fields in the card long name. Only number and * alphabet characters and a few separator characters are kept. @@ -2049,6 +2050,7 @@ int snd_soc_set_dmi_name(struct snd_soc_card *card, const char *flavour) return 0; } EXPORT_SYMBOL_GPL(snd_soc_set_dmi_name); +#endif /* CONFIG_DMI */ static int snd_soc_instantiate_card(struct snd_soc_card *card) { -- cgit v1.2.3 From 861886d338f7dd802be972e770a695bba62f397a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 24 Apr 2017 08:54:42 +0200 Subject: ASoC: Call snd_soc_set_dmi_name() unconditionally Since recently UCM can pick up a configuration specific to the board via card longname field, and we introduced a helper function snd_soc_set_dmi_name() for that. So far, it was used only in one place (sound/soc/intel/boards/broadwell.c), but it should be more widely applied. This patch puts a big hammer for that: it lets snd_soc_register_card() calling snd_soc_set_dmi_name() unconditionally, so that all x86 devices get the better longname string. This would have no impact for other systems without DMI support, as snd_soc_set_dmi_name() is no-op on them. Signed-off-by: Takashi Iwai Acked-by: Liam Girdwood Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/boards/broadwell.c | 3 --- sound/soc/soc-core.c | 3 +++ 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/boards/broadwell.c b/sound/soc/intel/boards/broadwell.c index faf865bb1765..6dcbbcefc25b 100644 --- a/sound/soc/intel/boards/broadwell.c +++ b/sound/soc/intel/boards/broadwell.c @@ -269,9 +269,6 @@ static struct snd_soc_card broadwell_rt286 = { static int broadwell_audio_probe(struct platform_device *pdev) { broadwell_rt286.dev = &pdev->dev; - - snd_soc_set_dmi_name(&broadwell_rt286, NULL); - return devm_snd_soc_register_card(&pdev->dev, &broadwell_rt286); } diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 52f6d9c28df9..05c4d9564b0b 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2192,6 +2192,9 @@ static int snd_soc_instantiate_card(struct snd_soc_card *card) snd_soc_dapm_add_routes(&card->dapm, card->of_dapm_routes, card->num_of_dapm_routes); + /* try to set some sane longname if DMI is available */ + snd_soc_set_dmi_name(card, NULL); + snprintf(card->snd_card->shortname, sizeof(card->snd_card->shortname), "%s", card->name); snprintf(card->snd_card->longname, sizeof(card->snd_card->longname), -- cgit v1.2.3 From 9f2cf73ed65b598514e4858ca3d602710718ab93 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 23 Apr 2017 09:22:56 +0200 Subject: ASoC: bytcr_rt5640: Allow quirk set via module option The bytcr-rt5640 driver has a few quirk setups depending on the board, where the quirk value is set by DMI matching. When you have a new device to add the support, you often experience to try the different quirk by trial-and-error. Or, you may have a development model that still has no proper DMI string. In either case, you'd need to compile the driver at each time. This patch introduces a module option to override the quirk value on the fly. User can boot like snd-soc-sst-bytcr-rt5640.quirk=0x4004 to override the default value without recompilation. It's a raw value, so user needs to check the source code for the meaning of each bit. Signed-off-by: Takashi Iwai Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5640.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'sound/soc') diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 5c7219fb3aa8..0ac32788f216 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -19,6 +19,7 @@ #include #include +#include #include #include #include @@ -58,6 +59,9 @@ struct byt_rt5640_private { }; static unsigned long byt_rt5640_quirk = BYT_RT5640_MCLK_EN; +static unsigned int quirk_override; +module_param_named(quirk, quirk_override, int, 0444); +MODULE_PARM_DESC(quirk, "Board-specific quirk override"); static void log_quirks(struct device *dev) { @@ -806,6 +810,11 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) /* check quirks before creating card */ dmi_check_system(byt_rt5640_quirk_table); + if (quirk_override) { + dev_info(&pdev->dev, "Overriding quirk %0x => 0x%x\n", + (unsigned int)byt_rt5640_quirk, quirk_override); + byt_rt5640_quirk = quirk_override; + } log_quirks(&pdev->dev); if ((byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) || -- cgit v1.2.3 From 0b2c9f88b94cd40f6a27641f0bac02a7ba185e39 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 24 Apr 2017 23:34:30 +0200 Subject: ASoC: bytcr_rt5640: Fix a typo and quirk parameter type The previous patch for adding the quirk module option had a typo in its info print, which results in a weird output. Also, the parameter type should be rather unsigned int instead of signed int. Fixes: 9f2cf73ed65b ("ASoC: bytcr_rt5640: Allow quirk set via module option") Reported-by: Pierre-Louis Bossart Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5640.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 0ac32788f216..5ca09cadf39f 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -60,7 +60,7 @@ struct byt_rt5640_private { static unsigned long byt_rt5640_quirk = BYT_RT5640_MCLK_EN; static unsigned int quirk_override; -module_param_named(quirk, quirk_override, int, 0444); +module_param_named(quirk, quirk_override, uint, 0444); MODULE_PARM_DESC(quirk, "Board-specific quirk override"); static void log_quirks(struct device *dev) @@ -811,7 +811,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) /* check quirks before creating card */ dmi_check_system(byt_rt5640_quirk_table); if (quirk_override) { - dev_info(&pdev->dev, "Overriding quirk %0x => 0x%x\n", + dev_info(&pdev->dev, "Overriding quirk 0x%x => 0x%x\n", (unsigned int)byt_rt5640_quirk, quirk_override); byt_rt5640_quirk = quirk_override; } -- cgit v1.2.3 From cb67d7651676e8c8f2e40587ef591da057806c57 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 24 Apr 2017 16:34:33 -0500 Subject: ASoC: bytcr_rt5640: log quirk configuration errors Now that quirks can be overridden with a module parameter, log errors so that non-sensical quirks introduced by mistake are identified. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5640.c | 100 +++++++++++++++++++++++++--------- 1 file changed, 75 insertions(+), 25 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 5ca09cadf39f..f063368edef9 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -57,6 +57,7 @@ enum { struct byt_rt5640_private { struct clk *mclk; }; +static bool is_bytcr; static unsigned long byt_rt5640_quirk = BYT_RT5640_MCLK_EN; static unsigned int quirk_override; @@ -65,30 +66,79 @@ MODULE_PARM_DESC(quirk, "Board-specific quirk override"); static void log_quirks(struct device *dev) { - if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_DMIC1_MAP) - dev_info(dev, "quirk DMIC1_MAP enabled"); - if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_DMIC2_MAP) - dev_info(dev, "quirk DMIC2_MAP enabled"); - if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_IN1_MAP) - dev_info(dev, "quirk IN1_MAP enabled"); - if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_IN3_MAP) - dev_info(dev, "quirk IN3_MAP enabled"); - if (byt_rt5640_quirk & BYT_RT5640_DMIC_EN) - dev_info(dev, "quirk DMIC enabled"); + int map; + bool has_dmic = false; + bool has_mclk = false; + bool has_ssp0 = false; + bool has_ssp0_aif1 = false; + bool has_ssp0_aif2 = false; + bool has_ssp2_aif2 = false; + + map = BYT_RT5640_MAP(byt_rt5640_quirk); + switch (map) { + case BYT_RT5640_DMIC1_MAP: + dev_info(dev, "quirk DMIC1_MAP enabled\n"); + has_dmic = true; + break; + case BYT_RT5640_DMIC2_MAP: + dev_info(dev, "quirk DMIC2_MAP enabled\n"); + has_dmic = true; + break; + case BYT_RT5640_IN1_MAP: + dev_info(dev, "quirk IN1_MAP enabled\n"); + break; + case BYT_RT5640_IN3_MAP: + dev_info(dev, "quirk IN3_MAP enabled\n"); + break; + default: + dev_err(dev, "quirk map 0x%x is not supported, microphone input will not work\n", map); + break; + } + if (byt_rt5640_quirk & BYT_RT5640_DMIC_EN) { + if (has_dmic) + dev_info(dev, "quirk DMIC enabled\n"); + else + dev_err(dev, "quirk DMIC enabled but no DMIC input set, will be ignored\n"); + } if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) - dev_info(dev, "quirk MONO_SPEAKER enabled"); - if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) - dev_info(dev, "quirk DIFF_MIC enabled"); - if (byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) - dev_info(dev, "quirk SSP2_AIF2 enabled"); - if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) - dev_info(dev, "quirk SSP0_AIF1 enabled"); - if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2) - dev_info(dev, "quirk SSP0_AIF2 enabled"); - if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) - dev_info(dev, "quirk MCLK_EN enabled"); - if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) - dev_info(dev, "quirk MCLK_25MHZ enabled"); + dev_info(dev, "quirk MONO_SPEAKER enabled\n"); + if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) { + if (!has_dmic) + dev_info(dev, "quirk DIFF_MIC enabled\n"); + else + dev_info(dev, "quirk DIFF_MIC enabled but DMIC input selected, will be ignored\n"); + } + if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) { + dev_info(dev, "quirk SSP0_AIF1 enabled\n"); + has_ssp0 = true; + has_ssp0_aif1 = true; + } + if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2) { + dev_info(dev, "quirk SSP0_AIF2 enabled\n"); + has_ssp0 = true; + has_ssp0_aif2 = true; + } + if (byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) { + dev_info(dev, "quirk SSP2_AIF2 enabled\n"); + has_ssp2_aif2 = true; + } + if (is_bytcr && !has_ssp0) + dev_err(dev, "Invalid routing, bytcr detected but no SSP0-based quirk, audio cannot work with SSP2 on bytcr\n"); + if (has_ssp0_aif1 && has_ssp0_aif2) + dev_err(dev, "Invalid routing, SSP0 cannot be connected to both AIF1 and AIF2\n"); + if (has_ssp0 && has_ssp2_aif2) + dev_err(dev, "Invalid routing, cannot have both SSP0 and SSP2 connected to codec\n"); + + if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { + dev_info(dev, "quirk MCLK_EN enabled\n"); + has_mclk = true; + } + if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) { + if (has_mclk) + dev_info(dev, "quirk MCLK_25MHZ enabled\n"); + else + dev_err(dev, "quirk MCLK_25MHZ enabled but quirk MCLK not selected, will be ignored\n"); + } } @@ -132,7 +182,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, ret = clk_prepare_enable(priv->mclk); if (ret < 0) { dev_err(card->dev, - "could not configure MCLK state"); + "could not configure MCLK state\n"); return ret; } } @@ -714,8 +764,8 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) int i; int dai_index; struct byt_rt5640_private *priv; - bool is_bytcr = false; + is_bytcr = false; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC); if (!priv) return -ENOMEM; -- cgit v1.2.3 From 9fe9c71192832a1c63fb94120cb6c2541aca694f Mon Sep 17 00:00:00 2001 From: G Kranthi Date: Tue, 25 Apr 2017 12:18:19 +0530 Subject: ASoC: Intel: Skylake: Move sst common initialization to a helper function Some skl sst context are not dependent of platform and initializing them independently for each platform can lead to errors. So optimize by moving them to a helper function and platform specific init code can call this. Signed-off-by: G Kranthi Signed-off-by: Subhransu S. Prusty Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 28 +++++-------------------- sound/soc/intel/skylake/skl-sst-dsp.h | 3 +++ sound/soc/intel/skylake/skl-sst-utils.c | 37 +++++++++++++++++++++++++++++++++ sound/soc/intel/skylake/skl-sst.c | 32 ++++++---------------------- 4 files changed, 51 insertions(+), 49 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 268bdaec8042..2bf6ebe29f50 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -590,23 +590,14 @@ int bxt_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, struct sst_dsp *sst; int ret; - skl = devm_kzalloc(dev, sizeof(*skl), GFP_KERNEL); - if (skl == NULL) - return -ENOMEM; - - skl->dev = dev; - skl_dev.thread_context = skl; - INIT_LIST_HEAD(&skl->uuid_list); - - skl->dsp = skl_dsp_ctx_init(dev, &skl_dev, irq); - if (!skl->dsp) { - dev_err(skl->dev, "skl_dsp_ctx_init failed\n"); - return -ENODEV; + ret = skl_sst_ctx_init(dev, irq, fw_name, dsp_ops, dsp, &skl_dev); + if (ret < 0) { + dev_err(skl->dev, "%s: no device\n", __func__); + return ret; } + skl = *dsp; sst = skl->dsp; - sst->fw_name = fw_name; - sst->dsp_ops = dsp_ops; sst->fw_ops = bxt_fw_ops; sst->addr.lpe = mmio_base; sst->addr.shim = mmio_base; @@ -614,24 +605,15 @@ int bxt_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, sst_dsp_mailbox_init(sst, (BXT_ADSP_SRAM0_BASE + SKL_ADSP_W0_STAT_SZ), SKL_ADSP_W0_UP_SZ, BXT_ADSP_SRAM1_BASE, SKL_ADSP_W1_SZ); - INIT_LIST_HEAD(&sst->module_list); - ret = skl_ipc_init(dev, skl); - if (ret) - return ret; - /* set the D0i3 check */ skl->ipc.ops.check_dsp_lp_on = skl_ipc_check_D0i0; skl->cores.count = 2; skl->boot_complete = false; init_waitqueue_head(&skl->boot_wait); - skl->is_first_boot = true; INIT_DELAYED_WORK(&skl->d0i3.work, bxt_set_dsp_D0i3); skl->d0i3.state = SKL_DSP_D0I3_NONE; - if (dsp) - *dsp = skl; - return 0; } EXPORT_SYMBOL_GPL(bxt_sst_dsp_init); diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h index 7229a12b4c94..c1f95e23933d 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -247,5 +247,8 @@ void skl_freeup_uuid_list(struct skl_sst *ctx); int skl_dsp_strip_extended_manifest(struct firmware *fw); void skl_dsp_enable_notification(struct skl_sst *ctx, bool enable); +int skl_sst_ctx_init(struct device *dev, int irq, const char *fw_name, + struct skl_dsp_loader_ops dsp_ops, struct skl_sst **dsp, + struct sst_dsp_device *skl_dev); #endif /*__SKL_SST_DSP_H__*/ diff --git a/sound/soc/intel/skylake/skl-sst-utils.c b/sound/soc/intel/skylake/skl-sst-utils.c index 6d5bff04bf65..a72152123c3c 100644 --- a/sound/soc/intel/skylake/skl-sst-utils.c +++ b/sound/soc/intel/skylake/skl-sst-utils.c @@ -361,3 +361,40 @@ int skl_dsp_strip_extended_manifest(struct firmware *fw) return 0; } + +int skl_sst_ctx_init(struct device *dev, int irq, const char *fw_name, + struct skl_dsp_loader_ops dsp_ops, struct skl_sst **dsp, + struct sst_dsp_device *skl_dev) +{ + struct skl_sst *skl; + struct sst_dsp *sst; + int ret; + + skl = devm_kzalloc(dev, sizeof(*skl), GFP_KERNEL); + if (skl == NULL) + return -ENOMEM; + + skl->dev = dev; + skl_dev->thread_context = skl; + INIT_LIST_HEAD(&skl->uuid_list); + skl->dsp = skl_dsp_ctx_init(dev, skl_dev, irq); + if (!skl->dsp) { + dev_err(skl->dev, "%s: no device\n", __func__); + return -ENODEV; + } + + sst = skl->dsp; + sst->fw_name = fw_name; + sst->dsp_ops = dsp_ops; + init_waitqueue_head(&skl->mod_load_wait); + INIT_LIST_HEAD(&sst->module_list); + ret = skl_ipc_init(dev, skl); + if (ret) + return ret; + + skl->is_first_boot = true; + if (dsp) + *dsp = skl; + + return ret; +} diff --git a/sound/soc/intel/skylake/skl-sst.c b/sound/soc/intel/skylake/skl-sst.c index 539529729e3f..4fdd503a837c 100644 --- a/sound/soc/intel/skylake/skl-sst.c +++ b/sound/soc/intel/skylake/skl-sst.c @@ -330,7 +330,6 @@ static int skl_transfer_module(struct sst_dsp *ctx, const void *data, int ret, bytes_left, curr_pos; struct skl_sst *skl = ctx->thread_context; skl->mod_load_complete = false; - init_waitqueue_head(&skl->mod_load_wait); bytes_left = ctx->cl_dev.ops.cl_copy_to_dmabuf(ctx, data, size, false); if (bytes_left < 0) @@ -489,43 +488,24 @@ int skl_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, struct sst_dsp *sst; int ret; - skl = devm_kzalloc(dev, sizeof(*skl), GFP_KERNEL); - if (skl == NULL) - return -ENOMEM; - - skl->dev = dev; - skl_dev.thread_context = skl; - INIT_LIST_HEAD(&skl->uuid_list); - - skl->dsp = skl_dsp_ctx_init(dev, &skl_dev, irq); - if (!skl->dsp) { - dev_err(skl->dev, "%s: no device\n", __func__); - return -ENODEV; + ret = skl_sst_ctx_init(dev, irq, fw_name, dsp_ops, dsp, &skl_dev); + if (ret < 0) { + dev_err(dev, "%s: no device\n", __func__); + return ret; } + skl = *dsp; sst = skl->dsp; - - sst->fw_name = fw_name; sst->addr.lpe = mmio_base; sst->addr.shim = mmio_base; sst_dsp_mailbox_init(sst, (SKL_ADSP_SRAM0_BASE + SKL_ADSP_W0_STAT_SZ), SKL_ADSP_W0_UP_SZ, SKL_ADSP_SRAM1_BASE, SKL_ADSP_W1_SZ); - INIT_LIST_HEAD(&sst->module_list); - sst->dsp_ops = dsp_ops; sst->fw_ops = skl_fw_ops; - ret = skl_ipc_init(dev, skl); - if (ret) - return ret; - skl->cores.count = 2; - skl->is_first_boot = true; - - if (dsp) - *dsp = skl; - return ret; + return 0; } EXPORT_SYMBOL_GPL(skl_sst_dsp_init); -- cgit v1.2.3 From ebe8907687c052b36839b5f9ed09005db4fbe83c Mon Sep 17 00:00:00 2001 From: "Subhransu S. Prusty" Date: Tue, 25 Apr 2017 12:18:20 +0530 Subject: ASoC: Intel: Skylake: Commonize library load request firmware, strip extended manifest and release library changes are common to kabylake and APL. So move these common code to utils to be reused in later patches for kabylake library load. Signed-off-by: Subhransu S. Prusty Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 38 ++++------------------------- sound/soc/intel/skylake/skl-sst-dsp.h | 7 +++++- sound/soc/intel/skylake/skl-sst-utils.c | 43 +++++++++++++++++++++++++++++++++ 3 files changed, 54 insertions(+), 34 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 2bf6ebe29f50..d26545ee3e58 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -53,18 +53,6 @@ static unsigned int bxt_get_errorcode(struct sst_dsp *ctx) return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE); } -static void sst_bxt_release_library(struct skl_lib_info *linfo, int lib_count) -{ - int i; - - for (i = 1; i < lib_count; i++) { - if (linfo[i].fw) { - release_firmware(linfo[i].fw); - linfo[i].fw = NULL; - } - } -} - static int bxt_load_library(struct sst_dsp *ctx, struct skl_lib_info *linfo, int lib_count) { @@ -75,26 +63,10 @@ bxt_load_library(struct sst_dsp *ctx, struct skl_lib_info *linfo, int lib_count) /* library indices start from 1 to N. 0 represents base FW */ for (i = 1; i < lib_count; i++) { - if (linfo[i].fw == NULL) { - ret = request_firmware(&linfo[i].fw, linfo[i].name, - ctx->dev); - if (ret < 0) { - dev_err(ctx->dev, "Request lib %s failed:%d\n", - linfo[i].name, ret); - goto load_library_failed; - } - } - - if (skl->is_first_boot) { - ret = snd_skl_parse_uuids(ctx, linfo[i].fw, + ret = skl_prepare_lib_load(skl, &skl->lib_info[i], &stripped_fw, BXT_ADSP_FW_BIN_HDR_OFFSET, i); - if (ret < 0) - goto load_library_failed; - } - - stripped_fw.data = linfo[i].fw->data; - stripped_fw.size = linfo[i].fw->size; - skl_dsp_strip_extended_manifest(&stripped_fw); + if (ret < 0) + goto load_library_failed; stream_tag = ctx->dsp_ops.prepare(ctx->dev, 0x40, stripped_fw.size, &dmab); @@ -121,7 +93,7 @@ bxt_load_library(struct sst_dsp *ctx, struct skl_lib_info *linfo, int lib_count) return ret; load_library_failed: - sst_bxt_release_library(linfo, lib_count); + skl_release_library(linfo, lib_count); return ret; } @@ -648,7 +620,7 @@ EXPORT_SYMBOL_GPL(bxt_sst_init_fw); void bxt_sst_dsp_cleanup(struct device *dev, struct skl_sst *ctx) { - sst_bxt_release_library(ctx->lib_info, ctx->lib_count); + skl_release_library(ctx->lib_info, ctx->lib_count); if (ctx->dsp->fw) release_firmware(ctx->dsp->fw); skl_freeup_uuid_list(ctx); diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h index c1f95e23933d..6d9aed23d5cd 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -18,6 +18,7 @@ #include #include +#include #include #include "skl-sst-cldma.h" @@ -145,7 +146,7 @@ struct skl_dsp_fw_ops { int (*load_fw)(struct sst_dsp *ctx); /* FW module parser/loader */ int (*load_library)(struct sst_dsp *ctx, - struct skl_lib_info *linfo, int count); + struct skl_lib_info *linfo, int lib_count); int (*parse_fw)(struct sst_dsp *ctx); int (*set_state_D0)(struct sst_dsp *ctx, unsigned int core_id); int (*set_state_D3)(struct sst_dsp *ctx, unsigned int core_id); @@ -250,5 +251,9 @@ void skl_dsp_enable_notification(struct skl_sst *ctx, bool enable); int skl_sst_ctx_init(struct device *dev, int irq, const char *fw_name, struct skl_dsp_loader_ops dsp_ops, struct skl_sst **dsp, struct sst_dsp_device *skl_dev); +int skl_prepare_lib_load(struct skl_sst *skl, struct skl_lib_info *linfo, + struct firmware *stripped_fw, + unsigned int hdr_offset, int index); +void skl_release_library(struct skl_lib_info *linfo, int lib_count); #endif /*__SKL_SST_DSP_H__*/ diff --git a/sound/soc/intel/skylake/skl-sst-utils.c b/sound/soc/intel/skylake/skl-sst-utils.c index a72152123c3c..81ee251881b4 100644 --- a/sound/soc/intel/skylake/skl-sst-utils.c +++ b/sound/soc/intel/skylake/skl-sst-utils.c @@ -398,3 +398,46 @@ int skl_sst_ctx_init(struct device *dev, int irq, const char *fw_name, return ret; } + +int skl_prepare_lib_load(struct skl_sst *skl, struct skl_lib_info *linfo, + struct firmware *stripped_fw, + unsigned int hdr_offset, int index) +{ + int ret; + struct sst_dsp *dsp = skl->dsp; + + if (linfo->fw == NULL) { + ret = request_firmware(&linfo->fw, linfo->name, + skl->dev); + if (ret < 0) { + dev_err(skl->dev, "Request lib %s failed:%d\n", + linfo->name, ret); + return ret; + } + } + + if (skl->is_first_boot) { + ret = snd_skl_parse_uuids(dsp, linfo->fw, hdr_offset, index); + if (ret < 0) + return ret; + } + + stripped_fw->data = linfo->fw->data; + stripped_fw->size = linfo->fw->size; + skl_dsp_strip_extended_manifest(stripped_fw); + + return 0; +} + +void skl_release_library(struct skl_lib_info *linfo, int lib_count) +{ + int i; + + /* library indices start from 1 to N. 0 represents base FW */ + for (i = 1; i < lib_count; i++) { + if (linfo[i].fw) { + release_firmware(linfo[i].fw); + linfo[i].fw = NULL; + } + } +} -- cgit v1.2.3 From 4e0277d226b578be99cf8899fd1442bf11873d12 Mon Sep 17 00:00:00 2001 From: G Kranthi Date: Tue, 25 Apr 2017 12:18:21 +0530 Subject: ASoC: Intel: Skylake: Modify arguments to reuse module transfer function Kabylake also uses code loader dma for module load and library load. skl_transfer_module can be reused. Modify the arguments to include library index to be passed to lib load ipc and module/lib check to use correct ipc for lib/module load. Signed-off-by: G Kranthi Signed-off-by: Subhransu S. Prusty Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-sst.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-sst.c b/sound/soc/intel/skylake/skl-sst.c index 4fdd503a837c..b4c3b5c63115 100644 --- a/sound/soc/intel/skylake/skl-sst.c +++ b/sound/soc/intel/skylake/skl-sst.c @@ -325,7 +325,7 @@ static struct skl_module_table *skl_module_get_from_id( } static int skl_transfer_module(struct sst_dsp *ctx, const void *data, - u32 size, u16 mod_id) + u32 size, u16 mod_id, u8 table_id, bool is_module) { int ret, bytes_left, curr_pos; struct skl_sst *skl = ctx->thread_context; @@ -335,10 +335,12 @@ static int skl_transfer_module(struct sst_dsp *ctx, const void *data, if (bytes_left < 0) return bytes_left; - ret = skl_ipc_load_modules(&skl->ipc, SKL_NUM_MODULES, &mod_id); - if (ret < 0) { - dev_err(ctx->dev, "Failed to Load module: %d\n", ret); - goto out; + if (is_module) { /* load module */ + ret = skl_ipc_load_modules(&skl->ipc, SKL_NUM_MODULES, &mod_id); + if (ret < 0) { + dev_err(ctx->dev, "Failed to Load module: %d\n", ret); + goto out; + } } /* @@ -393,7 +395,8 @@ static int skl_load_module(struct sst_dsp *ctx, u16 mod_id, u8 *guid) if (!module_entry->usage_cnt) { ret = skl_transfer_module(ctx, module_entry->mod_info->fw->data, - module_entry->mod_info->fw->size, mod_id); + module_entry->mod_info->fw->size, + mod_id, 0, true); if (ret < 0) { dev_err(ctx->dev, "Failed to Load module\n"); return ret; -- cgit v1.2.3 From 89b0d8a5bae91cb8ef23b1834c97d1db367f2db6 Mon Sep 17 00:00:00 2001 From: "Subhransu S. Prusty" Date: Tue, 25 Apr 2017 12:18:22 +0530 Subject: ASoC: Intel: Skylake: Register dsp_fw_ops for kabylake For audio kabylake is same as skylake except the module load approach. This patch registers different dsp_fw_ops for kabylake and next patch adds the module load support for kabylake. Signed-off-by: Subhransu S. Prusty Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-messages.c | 2 +- sound/soc/intel/skylake/skl-sst-dsp.h | 3 +++ sound/soc/intel/skylake/skl-sst.c | 30 ++++++++++++++++++++++++++++++ 3 files changed, 34 insertions(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index 09730dd8e6a3..ab1adc0c9cc3 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -209,7 +209,7 @@ static const struct skl_dsp_ops dsp_ops[] = { { .id = 0x9d71, .loader_ops = skl_get_loader_ops, - .init = skl_sst_dsp_init, + .init = kbl_sst_dsp_init, .init_fw = skl_sst_init_fw, .cleanup = skl_sst_dsp_cleanup }, diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h index 6d9aed23d5cd..eba20d37ba8c 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -230,6 +230,9 @@ int skl_dsp_boot(struct sst_dsp *ctx); int skl_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, const char *fw_name, struct skl_dsp_loader_ops dsp_ops, struct skl_sst **dsp); +int kbl_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, + const char *fw_name, struct skl_dsp_loader_ops dsp_ops, + struct skl_sst **dsp); int bxt_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, const char *fw_name, struct skl_dsp_loader_ops dsp_ops, struct skl_sst **dsp); diff --git a/sound/soc/intel/skylake/skl-sst.c b/sound/soc/intel/skylake/skl-sst.c index b4c3b5c63115..20968e5ec86d 100644 --- a/sound/soc/intel/skylake/skl-sst.c +++ b/sound/soc/intel/skylake/skl-sst.c @@ -470,6 +470,15 @@ static struct skl_dsp_fw_ops skl_fw_ops = { .unload_mod = skl_unload_module, }; +static struct skl_dsp_fw_ops kbl_fw_ops = { + .set_state_D0 = skl_set_dsp_D0, + .set_state_D3 = skl_set_dsp_D3, + .load_fw = skl_load_base_firmware, + .get_fw_errcode = skl_get_errorcode, + .load_mod = skl_load_module, + .unload_mod = skl_unload_module, +}; + static struct sst_ops skl_ops = { .irq_handler = skl_dsp_sst_interrupt, .write = sst_shim32_write, @@ -512,6 +521,27 @@ int skl_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, } EXPORT_SYMBOL_GPL(skl_sst_dsp_init); +int kbl_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, + const char *fw_name, struct skl_dsp_loader_ops dsp_ops, + struct skl_sst **dsp) +{ + struct sst_dsp *sst; + int ret; + + ret = skl_sst_dsp_init(dev, mmio_base, irq, fw_name, dsp_ops, dsp); + if (ret < 0) { + dev_err(dev, "%s: Init failed %d\n", __func__, ret); + return ret; + } + + sst = (*dsp)->dsp; + sst->fw_ops = kbl_fw_ops; + + return 0; + +} +EXPORT_SYMBOL_GPL(kbl_sst_dsp_init); + int skl_sst_init_fw(struct device *dev, struct skl_sst *ctx) { int ret; -- cgit v1.2.3 From 100e7f396ddf9abd76d5ec93f689be00187512f9 Mon Sep 17 00:00:00 2001 From: "Subhransu S. Prusty" Date: Tue, 25 Apr 2017 12:18:23 +0530 Subject: ASoC: Intel: Skylake: Modify load_lib_ipc arguments for a nowait version Kabylake uses code loader dma and wait on notification instead of ipc reply for load library ipc status. So modify the argument of skl_sst_ipc_load_library to check on flag to wait for ipc reply. Signed-off-by: Subhransu S. Prusty Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 2 +- sound/soc/intel/skylake/skl-sst-ipc.c | 8 ++++++-- sound/soc/intel/skylake/skl-sst-ipc.h | 2 +- 3 files changed, 8 insertions(+), 4 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index d26545ee3e58..fde4bc0f35b0 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -81,7 +81,7 @@ bxt_load_library(struct sst_dsp *ctx, struct skl_lib_info *linfo, int lib_count) memcpy(dmab.area, stripped_fw.data, stripped_fw.size); ctx->dsp_ops.trigger(ctx->dev, true, stream_tag); - ret = skl_sst_ipc_load_library(&skl->ipc, dma_id, i); + ret = skl_sst_ipc_load_library(&skl->ipc, dma_id, i, true); if (ret < 0) dev_err(ctx->dev, "IPC Load Lib for %s fail: %d\n", linfo[i].name, ret); diff --git a/sound/soc/intel/skylake/skl-sst-ipc.c b/sound/soc/intel/skylake/skl-sst-ipc.c index e90fe2c0bf2c..7147eddc6d3c 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.c +++ b/sound/soc/intel/skylake/skl-sst-ipc.c @@ -971,7 +971,7 @@ int skl_ipc_get_large_config(struct sst_generic_ipc *ipc, EXPORT_SYMBOL_GPL(skl_ipc_get_large_config); int skl_sst_ipc_load_library(struct sst_generic_ipc *ipc, - u8 dma_id, u8 table_id) + u8 dma_id, u8 table_id, bool wait) { struct skl_ipc_header header = {0}; u64 *ipc_header = (u64 *)(&header); @@ -983,7 +983,11 @@ int skl_sst_ipc_load_library(struct sst_generic_ipc *ipc, header.primary |= IPC_MOD_INSTANCE_ID(table_id); header.primary |= IPC_MOD_ID(dma_id); - ret = sst_ipc_tx_message_wait(ipc, *ipc_header, NULL, 0, NULL, 0); + if (wait) + ret = sst_ipc_tx_message_wait(ipc, *ipc_header, + NULL, 0, NULL, 0); + else + ret = sst_ipc_tx_message_nowait(ipc, *ipc_header, NULL, 0); if (ret < 0) dev_err(ipc->dev, "ipc: load lib failed\n"); diff --git a/sound/soc/intel/skylake/skl-sst-ipc.h b/sound/soc/intel/skylake/skl-sst-ipc.h index 4abf98c0e00e..e057da2713c6 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.h +++ b/sound/soc/intel/skylake/skl-sst-ipc.h @@ -197,7 +197,7 @@ int skl_ipc_get_large_config(struct sst_generic_ipc *ipc, struct skl_ipc_large_config_msg *msg, u32 *param); int skl_sst_ipc_load_library(struct sst_generic_ipc *ipc, - u8 dma_id, u8 table_id); + u8 dma_id, u8 table_id, bool wait); int skl_ipc_set_d0ix(struct sst_generic_ipc *ipc, struct skl_ipc_d0ix_msg *msg); -- cgit v1.2.3 From b6726009af555129c57dfbbf80a1fcf4d5a36ba0 Mon Sep 17 00:00:00 2001 From: "Sodhi, VunnyX" Date: Tue, 25 Apr 2017 12:18:24 +0530 Subject: ASoC: Intel: Skylake: Add loadable module support on KBL platform Kabylake platform expects modules in a library manifest. After loading base firmware library manifest is loaded using load library IPC. This is followed by module load using load multiple modules IPC. Signed-off-by: Sodhi, VunnyX Signed-off-by: G Kranthi Signed-off-by: Subhransu S. Prusty Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-sst-ipc.c | 2 ++ sound/soc/intel/skylake/skl-sst.c | 64 +++++++++++++++++++++++++++++++---- 2 files changed, 60 insertions(+), 6 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-sst-ipc.c b/sound/soc/intel/skylake/skl-sst-ipc.c index 7147eddc6d3c..58c525096a7c 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.c +++ b/sound/soc/intel/skylake/skl-sst-ipc.c @@ -427,6 +427,7 @@ static void skl_ipc_process_reply(struct sst_generic_ipc *ipc, sst_dsp_inbox_read(ipc->dsp, msg->rx_data, msg->rx_size); switch (IPC_GLB_NOTIFY_MSG_TYPE(header.primary)) { case IPC_GLB_LOAD_MULTIPLE_MODS: + case IPC_GLB_LOAD_LIBRARY: skl->mod_load_complete = true; skl->mod_load_status = true; wake_up(&skl->mod_load_wait); @@ -443,6 +444,7 @@ static void skl_ipc_process_reply(struct sst_generic_ipc *ipc, ipc->dsp->fw_ops.get_fw_errcode(ipc->dsp)); switch (IPC_GLB_NOTIFY_MSG_TYPE(header.primary)) { case IPC_GLB_LOAD_MULTIPLE_MODS: + case IPC_GLB_LOAD_LIBRARY: skl->mod_load_complete = true; skl->mod_load_status = false; wake_up(&skl->mod_load_wait); diff --git a/sound/soc/intel/skylake/skl-sst.c b/sound/soc/intel/skylake/skl-sst.c index 20968e5ec86d..155e456b7a3a 100644 --- a/sound/soc/intel/skylake/skl-sst.c +++ b/sound/soc/intel/skylake/skl-sst.c @@ -179,6 +179,18 @@ static int skl_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id) dev_err(ctx->dev, "unable to load firmware\n"); return ret; } + + /* load libs as they are also lost on D3 */ + if (skl->lib_count > 1) { + ret = ctx->fw_ops.load_library(ctx, skl->lib_info, + skl->lib_count); + if (ret < 0) { + dev_err(ctx->dev, "reload libs failed: %d\n", + ret); + return ret; + } + + } } /* @@ -204,7 +216,7 @@ static int skl_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id) skl->cores.state[core_id] = SKL_DSP_RUNNING; - return ret; + return 0; } static int skl_set_dsp_D3(struct sst_dsp *ctx, unsigned int core_id) @@ -335,12 +347,16 @@ static int skl_transfer_module(struct sst_dsp *ctx, const void *data, if (bytes_left < 0) return bytes_left; - if (is_module) { /* load module */ + /* check is_module flag to load module or library */ + if (is_module) ret = skl_ipc_load_modules(&skl->ipc, SKL_NUM_MODULES, &mod_id); - if (ret < 0) { - dev_err(ctx->dev, "Failed to Load module: %d\n", ret); - goto out; - } + else + ret = skl_sst_ipc_load_library(&skl->ipc, 0, table_id, false); + + if (ret < 0) { + dev_err(ctx->dev, "Failed to Load %s with err %d\n", + is_module ? "module" : "lib", ret); + goto out; } /* @@ -373,6 +389,32 @@ out: return ret; } +static int +kbl_load_library(struct sst_dsp *ctx, struct skl_lib_info *linfo, int lib_count) +{ + struct skl_sst *skl = ctx->thread_context; + struct firmware stripped_fw; + int ret, i; + + /* library indices start from 1 to N. 0 represents base FW */ + for (i = 1; i < lib_count; i++) { + ret = skl_prepare_lib_load(skl, &skl->lib_info[i], &stripped_fw, + SKL_ADSP_FW_BIN_HDR_OFFSET, i); + if (ret < 0) + goto load_library_failed; + ret = skl_transfer_module(ctx, stripped_fw.data, + stripped_fw.size, 0, i, false); + if (ret < 0) + goto load_library_failed; + } + + return 0; + +load_library_failed: + skl_release_library(linfo, lib_count); + return ret; +} + static int skl_load_module(struct sst_dsp *ctx, u16 mod_id, u8 *guid) { struct skl_module_table *module_entry = NULL; @@ -475,6 +517,7 @@ static struct skl_dsp_fw_ops kbl_fw_ops = { .set_state_D3 = skl_set_dsp_D3, .load_fw = skl_load_base_firmware, .get_fw_errcode = skl_get_errorcode, + .load_library = kbl_load_library, .load_mod = skl_load_module, .unload_mod = skl_unload_module, }; @@ -554,6 +597,15 @@ int skl_sst_init_fw(struct device *dev, struct skl_sst *ctx) } skl_dsp_init_core_state(sst); + + if (ctx->lib_count > 1) { + ret = sst->fw_ops.load_library(sst, ctx->lib_info, + ctx->lib_count); + if (ret < 0) { + dev_err(dev, "Load Library failed : %x\n", ret); + return ret; + } + } ctx->is_first_boot = false; return 0; -- cgit v1.2.3 From 351d74e4d7eacaab2ed0092b855355d5e2907117 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 27 Apr 2017 12:59:58 +0200 Subject: ASoC: Intel: Skylake: fix uninitialized pointer use The error handling in bxt_sst_dsp_init() got changed in a way that it now derefences an uninitialized pointer when printing a warning about the device not being found: sound/soc/intel/skylake/bxt-sst.c: In function 'bxt_sst_dsp_init': sound/soc/intel/skylake/bxt-sst.c:567:14: error: 'skl' may be used uninitialized in this function [-Werror=maybe-uninitialized] As we do have a valid device pointer available at the call site, let's use that instead. Fixes: 9fe9c7119283 ("ASoC: Intel: Skylake: Move sst common initialization to a helper function") Signed-off-by: Arnd Bergmann Reviewed-by: Takashi Sakamoto Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index fde4bc0f35b0..f5e7dbb1ba39 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -564,7 +564,7 @@ int bxt_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, ret = skl_sst_ctx_init(dev, irq, fw_name, dsp_ops, dsp, &skl_dev); if (ret < 0) { - dev_err(skl->dev, "%s: no device\n", __func__); + dev_err(dev, "%s: no device\n", __func__); return ret; } -- cgit v1.2.3 From 9ed4aefe6f5f7e1dfe6abe8b15cfc8c48963b6c0 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Thu, 27 Apr 2017 12:21:21 +0530 Subject: ASoC: Intel: Skylake: Fix unused variable warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With compiler option W=1, we have one more warning in the driver for 'set but unused variable', so remove the unused variable to fix it. sound/soc/intel/skylake/skl-pcm.c: In function ‘skl_platform_open’: sound/soc/intel/skylake/skl-pcm.c:954:26: warning: variable ‘runtime’ set but not used [-Wunused-but-set-variable] struct snd_pcm_runtime *runtime; Signed-off-by: Vinod Koul Reviewed-by: Takashi Sakamoto Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-pcm.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index d43d1976dd3b..e91bbcffc856 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -951,14 +951,12 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { static int skl_platform_open(struct snd_pcm_substream *substream) { - struct snd_pcm_runtime *runtime; struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai_link *dai_link = rtd->dai_link; dev_dbg(rtd->cpu_dai->dev, "In %s:%s\n", __func__, dai_link->cpu_dai_name); - runtime = substream->runtime; snd_soc_set_runtime_hwparams(substream, &azx_pcm_hw); return 0; -- cgit v1.2.3 From 081dc8ab46df85382658822e951ea79be87382b0 Mon Sep 17 00:00:00 2001 From: Guneshwor Singh Date: Thu, 27 Apr 2017 12:21:22 +0530 Subject: ASoC: Intel: Skylake: Return negative error code skl_tplg_add_pipe() returned EEXIST instead of negative EEXIST, so fix that and handle the return value as well. Signed-off-by: Guneshwor Singh Signed-off-by: Vinod Koul Reviewed-by: Takashi Sakamoto Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 0e459d3eb17a..29f68713a231 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -1711,7 +1711,7 @@ static int skl_tplg_add_pipe(struct device *dev, list_for_each_entry(ppl, &skl->ppl_list, node) { if (ppl->pipe->ppl_id == tkn_elem->value) { mconfig->pipe = ppl->pipe; - return EEXIST; + return -EEXIST; } } @@ -2003,11 +2003,13 @@ static int skl_tplg_get_token(struct device *dev, ret = skl_tplg_add_pipe(dev, mconfig, skl, tkn_elem); - if (ret < 0) + if (ret < 0) { + if (ret == -EEXIST) { + is_pipe_exists = 1; + break; + } return is_pipe_exists; - - if (ret == EEXIST) - is_pipe_exists = 1; + } break; -- cgit v1.2.3