From dbccd791a3fbbdac12c33834b73beff3984988e9 Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Tue, 11 Dec 2012 08:51:19 +0100 Subject: Bluetooth: Fix sending HCI commands after reset After sending reset command wait for its command complete event before sending next command. Some chips sends CC event for command received before reset if reset was send before chip replied with CC. This is also required by specification that host shall not send additional HCI commands before receiving CC for reset. < HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 18.404612 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.405850 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.406079 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.407864 Reset (0x03|0x0003) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.408062 > HCI Event: Command Complete (0x0e) plen 12 [hci0] 18.408835 Signed-off-by: Szymon Janc Cc: stable@vger.kernel.org Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net') diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 705078a0cc39..81b44481d0d9 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -2688,7 +2688,7 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) if (ev->opcode != HCI_OP_NOP) del_timer(&hdev->cmd_timer); - if (ev->ncmd) { + if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags)) { atomic_set(&hdev->cmd_cnt, 1); if (!skb_queue_empty(&hdev->cmd_q)) queue_work(hdev->workqueue, &hdev->cmd_work); -- cgit v1.2.3 From 0a9ab9bdb3e891762553f667066190c1d22ad62b Mon Sep 17 00:00:00 2001 From: Anderson Lizardo Date: Sun, 6 Jan 2013 18:28:53 -0400 Subject: Bluetooth: Fix incorrect strncpy() in hidp_setup_hid() The length parameter should be sizeof(req->name) - 1 because there is no guarantee that string provided by userspace will contain the trailing '\0'. Can be easily reproduced by manually setting req->name to 128 non-zero bytes prior to ioctl(HIDPCONNADD) and checking the device name setup on input subsystem: $ cat /sys/devices/pnp0/00\:04/tty/ttyS0/hci0/hci0\:1/input8/name AAAAAA[...]AAAAAAAAf0:af:f0:af:f0:af ("f0:af:f0:af:f0:af" is the device bluetooth address, taken from "phys" field in struct hid_device due to overflow.) Cc: stable@vger.kernel.org Signed-off-by: Anderson Lizardo Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- net/bluetooth/hidp/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net') diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index b2bcbe2dc328..a7352ff3fd1e 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -931,7 +931,7 @@ static int hidp_setup_hid(struct hidp_session *session, hid->version = req->version; hid->country = req->country; - strncpy(hid->name, req->name, 128); + strncpy(hid->name, req->name, sizeof(req->name) - 1); snprintf(hid->phys, sizeof(hid->phys), "%pMR", &bt_sk(session->ctrl_sock->sk)->src); -- cgit v1.2.3 From 7b064edae38d62d8587a8c574f93b53ce75ae749 Mon Sep 17 00:00:00 2001 From: Jaganath Kanakkassery Date: Thu, 10 Jan 2013 10:28:35 +0530 Subject: Bluetooth: Fix authentication if acl data comes before remote feature evt If remote device sends l2cap info request before read_remote_ext_feature completes then mgmt_connected will be sent in hci_acldata_packet() and remote name request wont be sent and eventually authentication wont happen Hcidump log of the issue < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr BC:85:1F:74:7F:29 ptype 0xcc18 rswitch 0x01 clkoffset 0x4bf7 (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr BC:85:1F:74:7F:29 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 12 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 12 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 12 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 3 < ACL data: handle 12 flags 0x00 dlen 20 L2CAP(s): Info rsp: type 3 result 0 Fixed channel list 0x00000002 L2CAP Signalling Channel > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 This patch moves sending mgmt_connected from hci_acldata_packet() to l2cap_connect_req() since this code is to handle the scenario remote device sends l2cap connect req too fast Signed-off-by: Jaganath Kanakkassery Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_core.c | 8 -------- net/bluetooth/l2cap_core.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 8 deletions(-) (limited to 'net') diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 596660d37c5e..0f78e34220c9 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -2810,14 +2810,6 @@ static void hci_acldata_packet(struct hci_dev *hdev, struct sk_buff *skb) if (conn) { hci_conn_enter_active_mode(conn, BT_POWER_FORCE_ACTIVE_OFF); - hci_dev_lock(hdev); - if (test_bit(HCI_MGMT, &hdev->dev_flags) && - !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) - mgmt_device_connected(hdev, &conn->dst, conn->type, - conn->dst_type, 0, NULL, 0, - conn->dev_class); - hci_dev_unlock(hdev); - /* Send to upper protocol */ l2cap_recv_acldata(conn, skb, flags); return; diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 2c78208d793e..22e658322845 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -3727,6 +3727,17 @@ sendresp: static int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u8 *data) { + struct hci_dev *hdev = conn->hcon->hdev; + struct hci_conn *hcon = conn->hcon; + + hci_dev_lock(hdev); + if (test_bit(HCI_MGMT, &hdev->dev_flags) && + !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &hcon->flags)) + mgmt_device_connected(hdev, &hcon->dst, hcon->type, + hcon->dst_type, 0, NULL, 0, + hcon->dev_class); + hci_dev_unlock(hdev); + l2cap_connect(conn, cmd, data, L2CAP_CONN_RSP, 0); return 0; } -- cgit v1.2.3 From b7e98b5100aad9290d7f06fcb9d1e80f7f62f05f Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Thu, 3 Jan 2013 19:59:28 -0200 Subject: Bluetooth: Check if the hci connection exists in SCO shutdown Checking only for sco_conn seems to not be enough and lead to NULL dereferences in the code, check for hcon instead. <1>[11340.226404] BUG: unable to handle kernel NULL pointer dereference at 0000000 8 <4>[11340.226619] EIP is at __sco_sock_close+0xe8/0x1a0 <4>[11340.226629] EAX: f063a740 EBX: 00000000 ECX: f58f4544 EDX: 00000000 <4>[11340.226640] ESI: dec83e00 EDI: 5f9a081f EBP: e0fdff38 ESP: e0fdff1c <0>[11340.226674] Stack: <4>[11340.226682] c184db87 c1251028 dec83e00 e0fdff38 c1754aef dec83e00 00000000 e0fdff5c <4>[11340.226718] c184f587 e0fdff64 e0fdff68 5f9a081f e0fdff5c c1751852 d7813800 62262f10 <4>[11340.226752] e0fdff70 c1753c00 00000000 00000001 0000000d e0fdffac c175425c 00000041 <0>[11340.226793] Call Trace: <4>[11340.226813] [] ? sco_sock_clear_timer+0x27/0x60 <4>[11340.226831] [] ? local_bh_enable+0x68/0xd0 <4>[11340.226846] [] ? lock_sock_nested+0x4f/0x60 <4>[11340.226862] [] sco_sock_shutdown+0x67/0xb0 <4>[11340.226879] [] ? sockfd_lookup_light+0x22/0x80 <4>[11340.226897] [] sys_shutdown+0x30/0x60 <4>[11340.226912] [] sys_socketcall+0x1dc/0x2a0 <4>[11340.226929] [] ? trace_hardirqs_on_thunk+0xc/0x10 <4>[11340.226944] [] syscall_call+0x7/0xb <4>[11340.226960] [] ? restore_cur+0x5e/0xd7 <0>[11340.226969] Code: ff 4b 08 0f 94 c0 84 c0 74 20 80 7b 19 01 74 2f b8 0a 00 00 Reported-by: Chuansheng Liu Signed-off-by: Gustavo Padovan --- net/bluetooth/sco.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net') diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 531a93d613d4..57f250c20e39 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -352,7 +352,7 @@ static void __sco_sock_close(struct sock *sk) case BT_CONNECTED: case BT_CONFIG: - if (sco_pi(sk)->conn) { + if (sco_pi(sk)->conn->hcon) { sk->sk_state = BT_DISCONN; sco_sock_set_timer(sk, SCO_DISCONN_TIMEOUT); hci_conn_put(sco_pi(sk)->conn->hcon); -- cgit v1.2.3