From e33e2241e272eddc38339692500bd1c7d8753a77 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Jun 2014 11:06:16 +0200 Subject: Revert "cfg80211: Use 5MHz bandwidth by default when checking usable channels" This reverts commit 8eca1fb692cc9557f386eddce75c300a3855d11a. Felix notes that this broke regulatory, leaving channel 12 open for AP operation in the US regulatory domain where it isn't permitted. Link: http://mid.gmane.org/53A6C0FF.9090104@openwrt.org Reported-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/wireless/reg.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) (limited to 'net/wireless') diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 558b0e3a02d8..1afdf45db38f 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -935,7 +935,7 @@ freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, if (!band_rule_found) band_rule_found = freq_in_rule_band(fr, center_freq); - bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(5)); + bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20)); if (band_rule_found && bw_fits) return rr; @@ -1019,10 +1019,10 @@ static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd, } #endif -/* Find an ieee80211_reg_rule such that a 5MHz channel with frequency - * chan->center_freq fits there. - * If there is no such reg_rule, disable the channel, otherwise set the - * flags corresponding to the bandwidths allowed in the particular reg_rule +/* + * Note that right now we assume the desired channel bandwidth + * is always 20 MHz for each individual channel (HT40 uses 20 MHz + * per channel, the primary and the extension channel). */ static void handle_channel(struct wiphy *wiphy, enum nl80211_reg_initiator initiator, @@ -1083,12 +1083,8 @@ static void handle_channel(struct wiphy *wiphy, if (reg_rule->flags & NL80211_RRF_AUTO_BW) max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule); - if (max_bandwidth_khz < MHZ_TO_KHZ(10)) - bw_flags = IEEE80211_CHAN_NO_10MHZ; - if (max_bandwidth_khz < MHZ_TO_KHZ(20)) - bw_flags |= IEEE80211_CHAN_NO_20MHZ; if (max_bandwidth_khz < MHZ_TO_KHZ(40)) - bw_flags |= IEEE80211_CHAN_NO_HT40; + bw_flags = IEEE80211_CHAN_NO_HT40; if (max_bandwidth_khz < MHZ_TO_KHZ(80)) bw_flags |= IEEE80211_CHAN_NO_80MHZ; if (max_bandwidth_khz < MHZ_TO_KHZ(160)) @@ -1522,12 +1518,8 @@ static void handle_channel_custom(struct wiphy *wiphy, if (reg_rule->flags & NL80211_RRF_AUTO_BW) max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule); - if (max_bandwidth_khz < MHZ_TO_KHZ(10)) - bw_flags = IEEE80211_CHAN_NO_10MHZ; - if (max_bandwidth_khz < MHZ_TO_KHZ(20)) - bw_flags |= IEEE80211_CHAN_NO_20MHZ; if (max_bandwidth_khz < MHZ_TO_KHZ(40)) - bw_flags |= IEEE80211_CHAN_NO_HT40; + bw_flags = IEEE80211_CHAN_NO_HT40; if (max_bandwidth_khz < MHZ_TO_KHZ(80)) bw_flags |= IEEE80211_CHAN_NO_80MHZ; if (max_bandwidth_khz < MHZ_TO_KHZ(160)) -- cgit v1.2.3 From 0ce12026d6ea4a24d52ddcde36b9643f2e26d560 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 17 Jun 2014 13:07:02 +0300 Subject: cfg80211: fix elapsed_jiffies calculation MAX_JIFFY_OFFSET has no meaning when calculating the elapsed jiffies, as jiffies run out until ULONG_MAX. This miscalculation results in erroneous values in case of a wrap-around. Signed-off-by: Eliad Peller Signed-off-by: Johannes Berg --- net/wireless/core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/wireless') diff --git a/net/wireless/core.h b/net/wireless/core.h index e9afbf10e756..7e3a3cef7df9 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -424,7 +424,7 @@ static inline unsigned int elapsed_jiffies_msecs(unsigned long start) if (end >= start) return jiffies_to_msecs(end - start); - return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1); + return jiffies_to_msecs(end + (ULONG_MAX - start) + 1); } void -- cgit v1.2.3 From 02df00eb0019e7d15a1fcddebe4d020226c1ccda Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jun 2014 14:06:25 +0200 Subject: nl80211: move set_qos_map command into split state The non-split wiphy state shouldn't be increased in size so move the new set_qos_map command into the split if statement. Cc: stable@vger.kernel.org (3.14+) Fixes: fa9ffc745610 ("cfg80211: Add support for QoS mapping") Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'net/wireless') diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index ba4f1723c83a..6668daf69326 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1497,18 +1497,17 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev, } CMD(start_p2p_device, START_P2P_DEVICE); CMD(set_mcast_rate, SET_MCAST_RATE); +#ifdef CONFIG_NL80211_TESTMODE + CMD(testmode_cmd, TESTMODE); +#endif if (state->split) { CMD(crit_proto_start, CRIT_PROTOCOL_START); CMD(crit_proto_stop, CRIT_PROTOCOL_STOP); if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH) CMD(channel_switch, CHANNEL_SWITCH); + CMD(set_qos_map, SET_QOS_MAP); } - CMD(set_qos_map, SET_QOS_MAP); - -#ifdef CONFIG_NL80211_TESTMODE - CMD(testmode_cmd, TESTMODE); -#endif - + /* add into the if now */ #undef CMD if (rdev->ops->connect || rdev->ops->auth) { -- cgit v1.2.3