From 93183bdbe73bbdd03e9566c8dc37c9d06b0d0db6 Mon Sep 17 00:00:00 2001 From: Chaitanya Tata Date: Sat, 19 Jan 2019 03:17:47 +0530 Subject: cfg80211: extend range deviation for DMG Recently, DMG frequency bands have been extended till 71GHz, so extend the range check till 20GHz (45-71GHZ), else some channels will be marked as disabled. Signed-off-by: Chaitanya Tata Signed-off-by: Johannes Berg --- net/wireless/reg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/wireless/reg.c') diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 35399a825aed..dd58b9909ac9 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1260,7 +1260,7 @@ static bool is_valid_rd(const struct ieee80211_regdomain *rd) * definitions (the "2.4 GHz band", the "5 GHz band" and the "60GHz band"), * however it is safe for now to assume that a frequency rule should not be * part of a frequency's band if the start freq or end freq are off by more - * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 10 GHz for the + * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 20 GHz for the * 60 GHz band. * This resolution can be lowered and should be considered as we add * regulatory rule support for other "bands". @@ -1275,7 +1275,7 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range, * with the Channel starting frequency above 45 GHz. */ u32 limit = freq_khz > 45 * ONE_GHZ_IN_KHZ ? - 10 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ; + 20 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ; if (abs(freq_khz - freq_range->start_freq_khz) <= limit) return true; if (abs(freq_khz - freq_range->end_freq_khz) <= limit) -- cgit v1.2.3