From bb512ad0732232f1d2693bb68f31a76bed8f22ae Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 25 Aug 2014 12:08:09 +0200 Subject: Revert "mac80211: disable uAPSD if all ACs are under ACM" This reverts commit 24aa11ab8ae03292d38ec0dbd9bc2ac49fe8a6dd. That commit was wrong since it uses data that hasn't even been set up yet, but might be a hold-over from a previous connection. Additionally, it seems like a driver-specific workaround that shouldn't have been in mac80211 to start with. Cc: stable@vger.kernel.org Fixes: 24aa11ab8ae0 ("mac80211: disable uAPSD if all ACs are under ACM") Reviewed-by: Luciano Coelho Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 31a8afaf7332..b82a12a9f0f1 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4376,8 +4376,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, rcu_read_unlock(); if (bss->wmm_used && bss->uapsd_supported && - (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD) && - sdata->wmm_acm != 0xff) { + (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)) { assoc_data->uapsd = true; ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED; } else { -- cgit v1.2.3 From 0e67c13667a72093aa3ef3cb54dd521e34e500fc Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 25 Jul 2014 16:20:22 +0200 Subject: mac80211: ignore AP_VLAN in ieee80211_recalc_chanctx_chantype When bringing down the AP, a WARN_ON is hit because the bss config chandef is empty here. Since AP_VLAN channel settings do not matter for anything chanctx related (always inherits the settings from the AP interface), let's just ignore it here. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/chan.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'net/mac80211') diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 6d537f03c0ba..4206a11bf8d7 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -541,6 +541,8 @@ static void ieee80211_recalc_chanctx_chantype(struct ieee80211_local *local, continue; if (rcu_access_pointer(sdata->vif.chanctx_conf) != conf) continue; + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + continue; if (!compat) compat = &sdata->vif.bss_conf.chandef; -- cgit v1.2.3 From 3918edb0e6a8b16c2866f4657d9fed41f9da562d Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 25 Jul 2014 16:20:23 +0200 Subject: mac80211: fix smps mode check for AP_VLAN In ieee80211_sta_ps_deliver_wakeup, sdata->smps_mode is checked. This is initialized only for the base AP interface, not the individual VLANs. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/sta_info.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index c6ee2139fbc5..441875f03750 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -1094,8 +1094,11 @@ void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) unsigned long flags; struct ps_data *ps; - if (sdata->vif.type == NL80211_IFTYPE_AP || - sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + sdata = container_of(sdata->bss, struct ieee80211_sub_if_data, + u.ap); + + if (sdata->vif.type == NL80211_IFTYPE_AP) ps = &sdata->bss->ps; else if (ieee80211_vif_is_mesh(&sdata->vif)) ps = &sdata->u.mesh.ps; -- cgit v1.2.3 From 6c6fa49649dc826b7ef81314324fe55cf1d0d954 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sat, 28 Jun 2014 16:35:25 -0400 Subject: mac80211: mesh_plink: handle confirm frames with new plid The 802.11 standard says when processing a plink confirm frame: "If the peerLinkID in the mesh peering instance has not been set, the Local Link ID field of the Mesh Peering Confirm request shall be copied into the peerLinkID in the mesh peering instance." We were only doing this when receiving an open peering frame, but it could happen that the open frame gets lost and so we should handle this case rather than rejecting the confirm and failing the whole peering process. Reported-by: Yu Niiro Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg --- net/mac80211/mesh_plink.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 63b874101b27..c47194d27149 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -959,7 +959,8 @@ mesh_plink_get_event(struct ieee80211_sub_if_data *sdata, if (!matches_local) event = CNF_RJCT; if (!mesh_plink_free_count(sdata) || - (sta->llid != llid || sta->plid != plid)) + sta->llid != llid || + (sta->plid && sta->plid != plid)) event = CNF_IGNR; else event = CNF_ACPT; @@ -1080,6 +1081,10 @@ mesh_process_plink_frame(struct ieee80211_sub_if_data *sdata, goto unlock_rcu; } + /* 802.11-2012 13.3.7.2 - update plid on CNF if not set */ + if (!sta->plid && event == CNF_ACPT) + sta->plid = plid; + changed |= mesh_plink_fsm(sdata, sta, event); unlock_rcu: -- cgit v1.2.3 From c7dcb45facedbff84237adb77bd3ba50f75c0de4 Mon Sep 17 00:00:00 2001 From: Denton Gentry Date: Mon, 28 Jul 2014 23:36:32 -0700 Subject: mac80211: fix start_seq_num in Rx reorder offload sta->last_seq_ctrl is the seq_ctrl field from the last header seen, need to shift it 4 bits to extract the sequence number. Otherwise the ieee80211_sn_less() check at the top of ieee80211_sta_manage_reorder_buf drops frames until the sequence number catches up. Cc: Michal Kazior Signed-off-by: Denton Gentry Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 01eede7406a5..f75e5f132c5a 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1175,8 +1175,8 @@ static void ieee80211_iface_work(struct work_struct *work) if (sta) { u16 last_seq; - last_seq = le16_to_cpu( - sta->last_seq_ctrl[rx_agg->tid]); + last_seq = IEEE80211_SEQ_TO_SN(le16_to_cpu( + sta->last_seq_ctrl[rx_agg->tid])); __ieee80211_start_rx_ba_session(sta, 0, 0, -- cgit v1.2.3 From 14b058bbce9279ee432f0944ca14df69f4a0d170 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Aug 2014 09:34:05 +0200 Subject: mac80211: fix agg_status debugfs file alignment The "RX active" string is too long, so the columns get shifted. Change it to just "RX" to avoid this. Signed-off-by: Johannes Berg --- net/mac80211/debugfs_sta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 3db96648b45a..86173c0de40e 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -167,7 +167,7 @@ static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf, p += scnprintf(p, sizeof(buf) + buf - p, "next dialog_token: %#02x\n", sta->ampdu_mlme.dialog_token_allocator + 1); p += scnprintf(p, sizeof(buf) + buf - p, - "TID\t\tRX active\tDTKN\tSSN\t\tTX\tDTKN\tpending\n"); + "TID\t\tRX\tDTKN\tSSN\t\tTX\tDTKN\tpending\n"); for (i = 0; i < IEEE80211_NUM_TIDS; i++) { tid_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[i]); -- cgit v1.2.3