From 679ef4eadde1f8e55074427c0d8de2da55ca81f9 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 23 Jul 2012 14:29:21 +0200
Subject: mac80211: use oper_channel in utils and config

Using hw.conf.channel is wrong as it could be the
temporary channel if any function like the beacon
get function is called while scanning or during
other temporary out-of-channel activities.

Use oper_channel instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/iface.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'net/mac80211/iface.c')

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index bfb57dcc1538..fc8ba83e2c33 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1274,7 +1274,7 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
 	/* reset some values that shouldn't be kept across type changes */
 	sdata->vif.bss_conf.basic_rates =
 		ieee80211_mandatory_rates(sdata->local,
-			sdata->local->hw.conf.channel->band);
+			sdata->local->oper_channel->band);
 	sdata->drop_unencrypted = 0;
 	if (type == NL80211_IFTYPE_STATION)
 		sdata->u.mgd.use_4addr = false;
-- 
cgit v1.2.3


From c405c6298eacd423098afacf6020ddbda1b0378b Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 30 Jul 2012 19:44:12 +0200
Subject: mac80211: manage carrier state in mesh

Instead of assuming the carrier is on all
the time in mesh manage it with joining
and leaving the mesh.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/iface.c | 12 ++++++++----
 net/mac80211/mesh.c  |  4 ++++
 2 files changed, 12 insertions(+), 4 deletions(-)

(limited to 'net/mac80211/iface.c')

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index fc8ba83e2c33..c65a03ba809f 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -539,12 +539,16 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 		changed |= ieee80211_reset_erp_info(sdata);
 		ieee80211_bss_info_change_notify(sdata, changed);
 
-		if (sdata->vif.type == NL80211_IFTYPE_STATION ||
-		    sdata->vif.type == NL80211_IFTYPE_ADHOC ||
-		    sdata->vif.type == NL80211_IFTYPE_AP)
+		switch (sdata->vif.type) {
+		case NL80211_IFTYPE_STATION:
+		case NL80211_IFTYPE_ADHOC:
+		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_MESH_POINT:
 			netif_carrier_off(dev);
-		else
+			break;
+		default:
 			netif_carrier_on(dev);
+		}
 
 		/*
 		 * set default queue parameters so drivers don't
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 03f1696d7d98..571d5183060e 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -610,6 +610,8 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 						BSS_CHANGED_HT |
 						BSS_CHANGED_BASIC_RATES |
 						BSS_CHANGED_BEACON_INT);
+
+	netif_carrier_on(sdata->dev);
 }
 
 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
@@ -617,6 +619,8 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 
+	netif_carrier_off(sdata->dev);
+
 	ifmsh->mesh_id_len = 0;
 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
 	sta_info_flush(local, NULL);
-- 
cgit v1.2.3


From 1411af156524ce42c2a7f989320c4484257f3ff5 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 30 Jul 2012 19:48:09 +0200
Subject: mac80211: enable WDS carrier only after adding station

Enable the carrier on WDS type interfaces only
after having added the station entry for the
WDS peer so outgoing frames will find it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/iface.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'net/mac80211/iface.c')

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index c65a03ba809f..2d6ac78971ea 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -546,6 +546,8 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 		case NL80211_IFTYPE_MESH_POINT:
 			netif_carrier_off(dev);
 			break;
+		case NL80211_IFTYPE_WDS:
+			break;
 		default:
 			netif_carrier_on(dev);
 		}
@@ -580,6 +582,7 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 		}
 
 		rate_control_rate_init(sta);
+		netif_carrier_on(dev);
 	}
 
 	/*
-- 
cgit v1.2.3


From 0d466b9c6798d431141ab15ae6d5ea413b4d09b2 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <thomas@cozybit.com>
Date: Fri, 3 Aug 2012 12:21:32 -0700
Subject: mac80211: improve cleanup when leaving mesh

It is not necessary to stop the mesh beacon in the mac80211 ndo_stop
handler, since cfg80211 has already left the mesh on NETDEV_GOING_DOWN
notification.

Also some improvements to ieee80211_stop_mesh():

 - flush mpath entries.
 - flush sta entries per-sdata so we don't remove entries belonging to
   other vifs on the same hw.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/iface.c | 8 --------
 net/mac80211/mesh.c  | 6 +++++-
 2 files changed, 5 insertions(+), 9 deletions(-)

(limited to 'net/mac80211/iface.c')

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 2d6ac78971ea..5a81577879ed 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -777,14 +777,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		synchronize_rcu();
 		skb_queue_purge(&sdata->skb_queue);
 
-		/*
-		 * Disable beaconing here for mesh only, AP and IBSS
-		 * are already taken care of.
-		 */
-		if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
-			ieee80211_bss_info_change_notify(sdata,
-				BSS_CHANGED_BEACON_ENABLED);
-
 		/*
 		 * Free all remaining keys, there shouldn't be any,
 		 * except maybe group keys in AP more or WDS?
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 571d5183060e..035cd0c8ce33 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -621,9 +621,13 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 
 	netif_carrier_off(sdata->dev);
 
+	/* stop the beacon */
 	ifmsh->mesh_id_len = 0;
 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
-	sta_info_flush(local, NULL);
+
+	/* flush STAs and mpaths on this iface */
+	sta_info_flush(sdata->local, sdata);
+	mesh_path_flush_by_iface(sdata);
 
 	del_timer_sync(&sdata->u.mesh.housekeeping_timer);
 	del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
-- 
cgit v1.2.3


From 3e17f2be31f354fe03e1732bc527a31ff3dd3bb9 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <thomas@cozybit.com>
Date: Fri, 3 Aug 2012 12:21:33 -0700
Subject: mac80211: remove ieee80211_clean_sdata()

This function was only used by mesh, and not really needed since any
interface-specific cleanup already happens in the netdev handlers.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/iface.c | 17 -----------------
 1 file changed, 17 deletions(-)

(limited to 'net/mac80211/iface.c')

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 5a81577879ed..abee3a0c25ed 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1155,18 +1155,6 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
 	ieee80211_debugfs_add_netdev(sdata);
 }
 
-static void ieee80211_clean_sdata(struct ieee80211_sub_if_data *sdata)
-{
-	switch (sdata->vif.type) {
-	case NL80211_IFTYPE_MESH_POINT:
-		mesh_path_flush_by_iface(sdata);
-		break;
-
-	default:
-		break;
-	}
-}
-
 static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
 					   enum nl80211_iftype type)
 {
@@ -1502,9 +1490,6 @@ void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
 	list_del_rcu(&sdata->list);
 	mutex_unlock(&sdata->local->iflist_mtx);
 
-	/* clean up type-dependent data */
-	ieee80211_clean_sdata(sdata);
-
 	synchronize_rcu();
 	unregister_netdevice(sdata->dev);
 }
@@ -1524,8 +1509,6 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local)
 	list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
 		list_del(&sdata->list);
 
-		ieee80211_clean_sdata(sdata);
-
 		unregister_netdevice_queue(sdata->dev, &unreg_list);
 	}
 	mutex_unlock(&local->iflist_mtx);
-- 
cgit v1.2.3


From aa7a00809cf6afe3cd6f5af2889110b47b798667 Mon Sep 17 00:00:00 2001
From: Eyal Shapira <eyal@wizery.com>
Date: Mon, 6 Aug 2012 14:26:16 +0300
Subject: mac80211: avoid using synchronize_rcu in ieee80211_set_probe_resp

This could take a while (100ms+) and may delay sending assoc resp
in AP mode with WPS or P2P GO (as setting the probe resp takes place
there). We've encountered situations where the delay was big enough
to cause connection problems with devices like Galaxy Nexus.
Switch to using call_rcu with a free handler.

[Arik - rework to use plain buffer and instead of skb]

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/cfg.c         | 16 +++++++---------
 net/mac80211/ieee80211_i.h |  8 +++++++-
 net/mac80211/iface.c       |  4 ++--
 net/mac80211/tx.c          |  7 +++++--
 4 files changed, 21 insertions(+), 14 deletions(-)

(limited to 'net/mac80211/iface.c')

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index df64b455821d..8052a7ad03a6 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -725,25 +725,23 @@ static int ieee80211_set_monitor_channel(struct wiphy *wiphy,
 static int ieee80211_set_probe_resp(struct ieee80211_sub_if_data *sdata,
 				    const u8 *resp, size_t resp_len)
 {
-	struct sk_buff *new, *old;
+	struct probe_resp *new, *old;
 
 	if (!resp || !resp_len)
-		return 1;
+		return -EINVAL;
 
 	old = rtnl_dereference(sdata->u.ap.probe_resp);
 
-	new = dev_alloc_skb(resp_len);
+	new = kzalloc(sizeof(struct probe_resp) + resp_len, GFP_KERNEL);
 	if (!new)
 		return -ENOMEM;
 
-	memcpy(skb_put(new, resp_len), resp, resp_len);
+	new->len = resp_len;
+	memcpy(new->data, resp, resp_len);
 
 	rcu_assign_pointer(sdata->u.ap.probe_resp, new);
-	if (old) {
-		/* TODO: use call_rcu() */
-		synchronize_rcu();
-		dev_kfree_skb(old);
-	}
+	if (old)
+		kfree_rcu(old, rcu_head);
 
 	return 0;
 }
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index d1a7c58a8c62..e22aee83ba53 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -272,9 +272,15 @@ struct beacon_data {
 	struct rcu_head rcu_head;
 };
 
+struct probe_resp {
+	struct rcu_head rcu_head;
+	int len;
+	u8 data[0];
+};
+
 struct ieee80211_if_ap {
 	struct beacon_data __rcu *beacon;
-	struct sk_buff __rcu *probe_resp;
+	struct probe_resp __rcu *probe_resp;
 
 	struct list_head vlans;
 
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index abee3a0c25ed..fbab7a84ca21 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -715,7 +715,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		struct ieee80211_sub_if_data *vlan, *tmpsdata;
 		struct beacon_data *old_beacon =
 			rtnl_dereference(sdata->u.ap.beacon);
-		struct sk_buff *old_probe_resp =
+		struct probe_resp *old_probe_resp =
 			rtnl_dereference(sdata->u.ap.probe_resp);
 
 		/* sdata_running will return false, so this will disable */
@@ -727,7 +727,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		RCU_INIT_POINTER(sdata->u.ap.probe_resp, NULL);
 		synchronize_rcu();
 		kfree(old_beacon);
-		kfree_skb(old_probe_resp);
+		kfree(old_probe_resp);
 
 		/* down all dependent devices, that is VLANs */
 		list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans,
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 7dbcf293708b..2d004ba0615e 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2481,7 +2481,8 @@ struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
 					struct ieee80211_vif *vif)
 {
 	struct ieee80211_if_ap *ap = NULL;
-	struct sk_buff *presp = NULL, *skb = NULL;
+	struct sk_buff *skb = NULL;
+	struct probe_resp *presp = NULL;
 	struct ieee80211_hdr *hdr;
 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
 
@@ -2495,10 +2496,12 @@ struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
 	if (!presp)
 		goto out;
 
-	skb = skb_copy(presp, GFP_ATOMIC);
+	skb = dev_alloc_skb(presp->len);
 	if (!skb)
 		goto out;
 
+	memcpy(skb_put(skb, presp->len), presp->data, presp->len);
+
 	hdr = (struct ieee80211_hdr *) skb->data;
 	memset(hdr->addr1, 0, sizeof(hdr->addr1));
 
-- 
cgit v1.2.3


From 98104fdeda63d57631c9f89e90a7b83b58fcee40 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Sat, 16 Jun 2012 00:19:54 +0200
Subject: cfg80211: add P2P Device abstraction

In order to support using a different MAC address
for the P2P Device address we must first have a
P2P Device abstraction that can be assigned a MAC
address.

This abstraction will also be useful to support
offloading P2P operations to the device, e.g.
periodic listen for discoverability.

Currently, the driver is responsible for assigning
a MAC address to the P2P Device, but this could be
changed by allowing a MAC address to be given to
the NEW_INTERFACE command.

As it has no associated netdev, a P2P Device can
only be identified by its wdev identifier but the
previous patches allowed using the wdev identifier
in various APIs, e.g. remain-on-channel.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/nl80211.h |  30 ++++++++++--
 include/net/cfg80211.h  |  40 +++++++++++++++-
 net/mac80211/iface.c    |   3 ++
 net/mac80211/util.c     |   2 +
 net/wireless/chan.c     |   7 ++-
 net/wireless/core.c     |  53 ++++++++++++++++++++-
 net/wireless/mlme.c     |  10 ++--
 net/wireless/nl80211.c  | 122 +++++++++++++++++++++++++++++++++++++++++++++---
 net/wireless/util.c     |  18 ++++++-
 9 files changed, 265 insertions(+), 20 deletions(-)

(limited to 'net/mac80211/iface.c')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 2f3878806403..458416279347 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -565,6 +565,14 @@
  *	%NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
  *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE.
  *
+ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
+ *	its %NL80211_ATTR_WDEV identifier. It must have been created with
+ *	%NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
+ *	P2P Device can be used for P2P operations, e.g. remain-on-channel and
+ *	public action frame TX.
+ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
+ *	its %NL80211_ATTR_WDEV identifier.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -708,6 +716,9 @@ enum nl80211_commands {
 
 	NL80211_CMD_CH_SWITCH_NOTIFY,
 
+	NL80211_CMD_START_P2P_DEVICE,
+	NL80211_CMD_STOP_P2P_DEVICE,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1575,6 +1586,10 @@ enum nl80211_attrs {
  * @NL80211_IFTYPE_MESH_POINT: mesh point
  * @NL80211_IFTYPE_P2P_CLIENT: P2P client
  * @NL80211_IFTYPE_P2P_GO: P2P group owner
+ * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
+ *	and therefore can't be created in the normal ways, use the
+ *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
+ *	commands to create and destroy one
  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
  * @NUM_NL80211_IFTYPES: number of defined interface types
  *
@@ -1593,6 +1608,7 @@ enum nl80211_iftype {
 	NL80211_IFTYPE_MESH_POINT,
 	NL80211_IFTYPE_P2P_CLIENT,
 	NL80211_IFTYPE_P2P_GO,
+	NL80211_IFTYPE_P2P_DEVICE,
 
 	/* keep last */
 	NUM_NL80211_IFTYPES,
@@ -2994,12 +3010,18 @@ enum nl80211_ap_sme_features {
  * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
  *	to work properly to suppport receiving regulatory hints from
  *	cellular base stations.
+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
+ *	P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
+ *	in the interface combinations, even when it's only used for scan
+ *	and remain-on-channel. This could be due to, for example, the
+ *	remain-on-channel implementation requiring a channel context.
  */
 enum nl80211_feature_flags {
-	NL80211_FEATURE_SK_TX_STATUS	= 1 << 0,
-	NL80211_FEATURE_HT_IBSS		= 1 << 1,
-	NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
-	NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
+	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
+	NL80211_FEATURE_HT_IBSS				= 1 << 1,
+	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2,
+	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3,
+	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4,
 };
 
 /**
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 493fa0c79005..4c518f1f1aca 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1437,7 +1437,8 @@ struct cfg80211_gtk_rekey_data {
  * @add_virtual_intf: create a new virtual interface with the given name,
  *	must set the struct wireless_dev's iftype. Beware: You must create
  *	the new netdev in the wiphy's network namespace! Returns the struct
- *	wireless_dev, or an ERR_PTR.
+ *	wireless_dev, or an ERR_PTR. For P2P device wdevs, the driver must
+ *	also set the address member in the wdev.
  *
  * @del_virtual_intf: remove the virtual interface
  *
@@ -1616,6 +1617,9 @@ struct cfg80211_gtk_rekey_data {
  * @get_channel: Get the current operating channel for the virtual interface.
  *	For monitor interfaces, it should return %NULL unless there's a single
  *	current monitoring channel.
+ *
+ * @start_p2p_device: Start the given P2P device.
+ * @stop_p2p_device: Stop the given P2P device.
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -1832,6 +1836,11 @@ struct cfg80211_ops {
 		(*get_channel)(struct wiphy *wiphy,
 			       struct wireless_dev *wdev,
 			       enum nl80211_channel_type *type);
+
+	int	(*start_p2p_device)(struct wiphy *wiphy,
+				    struct wireless_dev *wdev);
+	void	(*stop_p2p_device)(struct wiphy *wiphy,
+				   struct wireless_dev *wdev);
 };
 
 /*
@@ -2395,6 +2404,8 @@ struct cfg80211_cached_keys;
  * @cleanup_work: work struct used for cleanup that can't be done directly
  * @beacon_interval: beacon interval used on this device for transmitting
  *	beacons, 0 when not valid
+ * @address: The address for this device, valid only if @netdev is %NULL
+ * @p2p_started: true if this is a P2P Device that has been started
  */
 struct wireless_dev {
 	struct wiphy *wiphy;
@@ -2413,7 +2424,9 @@ struct wireless_dev {
 
 	struct work_struct cleanup_work;
 
-	bool use_4addr;
+	bool use_4addr, p2p_started;
+
+	u8 address[ETH_ALEN] __aligned(sizeof(u16));
 
 	/* currently used for IBSS and SME - might be rearranged later */
 	u8 ssid[IEEE80211_MAX_SSID_LEN];
@@ -2461,6 +2474,13 @@ struct wireless_dev {
 #endif
 };
 
+static inline u8 *wdev_address(struct wireless_dev *wdev)
+{
+	if (wdev->netdev)
+		return wdev->netdev->dev_addr;
+	return wdev->address;
+}
+
 /**
  * wdev_priv - return wiphy priv from wireless_dev
  *
@@ -3528,6 +3548,22 @@ void cfg80211_ch_switch_notify(struct net_device *dev, int freq,
  */
 u32 cfg80211_calculate_bitrate(struct rate_info *rate);
 
+/**
+ * cfg80211_unregister_wdev - remove the given wdev
+ * @wdev: struct wireless_dev to remove
+ *
+ * Call this function only for wdevs that have no netdev assigned,
+ * e.g. P2P Devices. It removes the device from the list so that
+ * it can no longer be used. It is necessary to call this function
+ * even when cfg80211 requests the removal of the interface by
+ * calling the del_virtual_intf() callback. The function must also
+ * be called when the driver wishes to unregister the wdev, e.g.
+ * when the device is unbound from the driver.
+ *
+ * Requires the RTNL to be held.
+ */
+void cfg80211_unregister_wdev(struct wireless_dev *wdev);
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index fbab7a84ca21..366d9d3e84c4 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -449,6 +449,7 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 	case NUM_NL80211_IFTYPES:
 	case NL80211_IFTYPE_P2P_CLIENT:
 	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_P2P_DEVICE:
 		/* cannot happen */
 		WARN_ON(1);
 		break;
@@ -1146,6 +1147,8 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
 	case NL80211_IFTYPE_WDS:
 	case NL80211_IFTYPE_AP_VLAN:
 		break;
+	case NL80211_IFTYPE_P2P_DEVICE:
+		/* not yet supported */
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case NUM_NL80211_IFTYPES:
 		BUG();
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 7dff94e43a0c..9a4e4e30ea6c 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1390,6 +1390,8 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		case NL80211_IFTYPE_MONITOR:
 			/* ignore virtual */
 			break;
+		case NL80211_IFTYPE_P2P_DEVICE:
+			/* not yet supported */
 		case NL80211_IFTYPE_UNSPECIFIED:
 		case NUM_NL80211_IFTYPES:
 		case NL80211_IFTYPE_P2P_CLIENT:
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index d355f67d0cdd..2f876b9ee344 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -105,7 +105,7 @@ cfg80211_get_chan_state(struct wireless_dev *wdev,
 
 	ASSERT_WDEV_LOCK(wdev);
 
-	if (!netif_running(wdev->netdev))
+	if (wdev->netdev && !netif_running(wdev->netdev))
 		return;
 
 	switch (wdev->iftype) {
@@ -143,6 +143,11 @@ cfg80211_get_chan_state(struct wireless_dev *wdev,
 	case NL80211_IFTYPE_WDS:
 		/* these interface types don't really have a channel */
 		return;
+	case NL80211_IFTYPE_P2P_DEVICE:
+		if (wdev->wiphy->features &
+				NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL)
+			*chanmode = CHAN_MODE_EXCLUSIVE;
+		return;
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case NUM_NL80211_IFTYPES:
 		WARN_ON(1);
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 31b40cc4a9c3..91b300443f4b 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -230,9 +230,24 @@ static int cfg80211_rfkill_set_block(void *data, bool blocked)
 	rtnl_lock();
 	mutex_lock(&rdev->devlist_mtx);
 
-	list_for_each_entry(wdev, &rdev->wdev_list, list)
-		if (wdev->netdev)
+	list_for_each_entry(wdev, &rdev->wdev_list, list) {
+		if (wdev->netdev) {
 			dev_close(wdev->netdev);
+			continue;
+		}
+		/* otherwise, check iftype */
+		switch (wdev->iftype) {
+		case NL80211_IFTYPE_P2P_DEVICE:
+			if (!wdev->p2p_started)
+				break;
+			rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
+			wdev->p2p_started = false;
+			rdev->opencount--;
+			break;
+		default:
+			break;
+		}
+	}
 
 	mutex_unlock(&rdev->devlist_mtx);
 	rtnl_unlock();
@@ -407,6 +422,11 @@ static int wiphy_verify_combinations(struct wiphy *wiphy)
 			if (WARN_ON(wiphy->software_iftypes & types))
 				return -EINVAL;
 
+			/* Only a single P2P_DEVICE can be allowed */
+			if (WARN_ON(types & BIT(NL80211_IFTYPE_P2P_DEVICE) &&
+				    c->limits[j].max > 1))
+				return -EINVAL;
+
 			cnt += c->limits[j].max;
 			/*
 			 * Don't advertise an unsupported type
@@ -734,6 +754,35 @@ static void wdev_cleanup_work(struct work_struct *work)
 	dev_put(wdev->netdev);
 }
 
+void cfg80211_unregister_wdev(struct wireless_dev *wdev)
+{
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+
+	ASSERT_RTNL();
+
+	if (WARN_ON(wdev->netdev))
+		return;
+
+	mutex_lock(&rdev->devlist_mtx);
+	list_del_rcu(&wdev->list);
+	rdev->devlist_generation++;
+
+	switch (wdev->iftype) {
+	case NL80211_IFTYPE_P2P_DEVICE:
+		if (!wdev->p2p_started)
+			break;
+		rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
+		wdev->p2p_started = false;
+		rdev->opencount--;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		break;
+	}
+	mutex_unlock(&rdev->devlist_mtx);
+}
+EXPORT_SYMBOL(cfg80211_unregister_wdev);
+
 static struct device_type wiphy_type = {
 	.name	= "wlan",
 };
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 1cdb1d5e6b0f..8fd0242ee169 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -736,7 +736,6 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
 			  const u8 *buf, size_t len, bool no_cck,
 			  bool dont_wait_for_ack, u64 *cookie)
 {
-	struct net_device *dev = wdev->netdev;
 	const struct ieee80211_mgmt *mgmt;
 	u16 stype;
 
@@ -796,7 +795,7 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
 		case NL80211_IFTYPE_AP:
 		case NL80211_IFTYPE_P2P_GO:
 		case NL80211_IFTYPE_AP_VLAN:
-			if (!ether_addr_equal(mgmt->bssid, dev->dev_addr))
+			if (!ether_addr_equal(mgmt->bssid, wdev_address(wdev)))
 				err = -EINVAL;
 			break;
 		case NL80211_IFTYPE_MESH_POINT:
@@ -809,6 +808,11 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
 			 * cfg80211 doesn't track the stations
 			 */
 			break;
+		case NL80211_IFTYPE_P2P_DEVICE:
+			/*
+			 * fall through, P2P device only supports
+			 * public action frames
+			 */
 		default:
 			err = -EOPNOTSUPP;
 			break;
@@ -819,7 +823,7 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
 			return err;
 	}
 
-	if (!ether_addr_equal(mgmt->sa, dev->dev_addr))
+	if (!ether_addr_equal(mgmt->sa, wdev_address(wdev)))
 		return -EINVAL;
 
 	/* Transmit the Action frame as requested by user space */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 97026f3b215a..787aeaa902fe 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1100,6 +1100,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		if (nla_put_u32(msg, i, NL80211_CMD_REGISTER_BEACONS))
 			goto nla_put_failure;
 	}
+	CMD(start_p2p_device, START_P2P_DEVICE);
 
 #ifdef CONFIG_NL80211_TESTMODE
 	CMD(testmode_cmd, TESTMODE);
@@ -1748,13 +1749,13 @@ static int nl80211_send_iface(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 
 	if (dev &&
 	    (nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
-	     nla_put_string(msg, NL80211_ATTR_IFNAME, dev->name) ||
-	     nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, dev->dev_addr)))
+	     nla_put_string(msg, NL80211_ATTR_IFNAME, dev->name)))
 		goto nla_put_failure;
 
 	if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
 	    nla_put_u32(msg, NL80211_ATTR_IFTYPE, wdev->iftype) ||
 	    nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)) ||
+	    nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, wdev_address(wdev)) ||
 	    nla_put_u32(msg, NL80211_ATTR_GENERATION,
 			rdev->devlist_generation ^
 			(cfg80211_rdev_list_generation << 2)))
@@ -2021,8 +2022,10 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
 		return PTR_ERR(wdev);
 	}
 
-	if (type == NL80211_IFTYPE_MESH_POINT &&
-	    info->attrs[NL80211_ATTR_MESH_ID]) {
+	switch (type) {
+	case NL80211_IFTYPE_MESH_POINT:
+		if (!info->attrs[NL80211_ATTR_MESH_ID])
+			break;
 		wdev_lock(wdev);
 		BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN !=
 			     IEEE80211_MAX_MESH_ID_LEN);
@@ -2031,6 +2034,26 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
 		memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]),
 		       wdev->mesh_id_up_len);
 		wdev_unlock(wdev);
+		break;
+	case NL80211_IFTYPE_P2P_DEVICE:
+		/*
+		 * P2P Device doesn't have a netdev, so doesn't go
+		 * through the netdev notifier and must be added here
+		 */
+		mutex_init(&wdev->mtx);
+		INIT_LIST_HEAD(&wdev->event_list);
+		spin_lock_init(&wdev->event_lock);
+		INIT_LIST_HEAD(&wdev->mgmt_registrations);
+		spin_lock_init(&wdev->mgmt_registrations_lock);
+
+		mutex_lock(&rdev->devlist_mtx);
+		wdev->identifier = ++rdev->wdev_id;
+		list_add_rcu(&wdev->list, &rdev->wdev_list);
+		rdev->devlist_generation++;
+		mutex_unlock(&rdev->devlist_mtx);
+		break;
+	default:
+		break;
 	}
 
 	if (nl80211_send_iface(msg, info->snd_pid, info->snd_seq, 0,
@@ -6053,6 +6076,7 @@ static int nl80211_register_mgmt(struct sk_buff *skb, struct genl_info *info)
 	case NL80211_IFTYPE_AP_VLAN:
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_P2P_DEVICE:
 		break;
 	default:
 		return -EOPNOTSUPP;
@@ -6099,6 +6123,7 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
 	case NL80211_IFTYPE_AP_VLAN:
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_P2P_DEVICE:
 		break;
 	default:
 		return -EOPNOTSUPP;
@@ -6195,6 +6220,7 @@ static int nl80211_tx_mgmt_cancel_wait(struct sk_buff *skb, struct genl_info *in
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_AP_VLAN:
 	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_P2P_DEVICE:
 		break;
 	default:
 		return -EOPNOTSUPP;
@@ -6810,6 +6836,68 @@ static int nl80211_register_beacons(struct sk_buff *skb, struct genl_info *info)
 	return 0;
 }
 
+static int nl80211_start_p2p_device(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct wireless_dev *wdev = info->user_ptr[1];
+	int err;
+
+	if (!rdev->ops->start_p2p_device)
+		return -EOPNOTSUPP;
+
+	if (wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)
+		return -EOPNOTSUPP;
+
+	if (wdev->p2p_started)
+		return 0;
+
+	mutex_lock(&rdev->devlist_mtx);
+	err = cfg80211_can_add_interface(rdev, wdev->iftype);
+	mutex_unlock(&rdev->devlist_mtx);
+	if (err)
+		return err;
+
+	err = rdev->ops->start_p2p_device(&rdev->wiphy, wdev);
+	if (err)
+		return err;
+
+	wdev->p2p_started = true;
+	mutex_lock(&rdev->devlist_mtx);
+	rdev->opencount++;
+	mutex_unlock(&rdev->devlist_mtx);
+
+	return 0;
+}
+
+static int nl80211_stop_p2p_device(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct wireless_dev *wdev = info->user_ptr[1];
+
+	if (wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)
+		return -EOPNOTSUPP;
+
+	if (!rdev->ops->stop_p2p_device)
+		return -EOPNOTSUPP;
+
+	if (!wdev->p2p_started)
+		return 0;
+
+	rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
+	wdev->p2p_started = false;
+
+	mutex_lock(&rdev->devlist_mtx);
+	rdev->opencount--;
+	mutex_unlock(&rdev->devlist_mtx);
+
+	if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) {
+		rdev->scan_req->aborted = true;
+		___cfg80211_scan_done(rdev, true);
+	}
+
+	return 0;
+}
+
 #define NL80211_FLAG_NEED_WIPHY		0x01
 #define NL80211_FLAG_NEED_NETDEV	0x02
 #define NL80211_FLAG_NEED_RTNL		0x04
@@ -6817,7 +6905,7 @@ static int nl80211_register_beacons(struct sk_buff *skb, struct genl_info *info)
 #define NL80211_FLAG_NEED_NETDEV_UP	(NL80211_FLAG_NEED_NETDEV |\
 					 NL80211_FLAG_CHECK_NETDEV_UP)
 #define NL80211_FLAG_NEED_WDEV		0x10
-/* If a netdev is associated, it must be UP */
+/* If a netdev is associated, it must be UP, P2P must be started */
 #define NL80211_FLAG_NEED_WDEV_UP	(NL80211_FLAG_NEED_WDEV |\
 					 NL80211_FLAG_CHECK_NETDEV_UP)
 
@@ -6878,6 +6966,13 @@ static int nl80211_pre_doit(struct genl_ops *ops, struct sk_buff *skb,
 			}
 
 			dev_hold(dev);
+		} else if (ops->internal_flags & NL80211_FLAG_CHECK_NETDEV_UP) {
+			if (!wdev->p2p_started) {
+				mutex_unlock(&cfg80211_mutex);
+				if (rtnl)
+					rtnl_unlock();
+				return -ENETDOWN;
+			}
 		}
 
 		cfg80211_lock_rdev(rdev);
@@ -7439,7 +7534,22 @@ static struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_NETDEV |
 				  NL80211_FLAG_NEED_RTNL,
 	},
-
+	{
+		.cmd = NL80211_CMD_START_P2P_DEVICE,
+		.doit = nl80211_start_p2p_device,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_WDEV |
+				  NL80211_FLAG_NEED_RTNL,
+	},
+	{
+		.cmd = NL80211_CMD_STOP_P2P_DEVICE,
+		.doit = nl80211_stop_p2p_device,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
+				  NL80211_FLAG_NEED_RTNL,
+	},
 };
 
 static struct genl_multicast_group nl80211_mlme_mcgrp = {
diff --git a/net/wireless/util.c b/net/wireless/util.c
index ce393dd8c928..d7b672262b5f 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -800,6 +800,10 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 	if (otype == NL80211_IFTYPE_AP_VLAN)
 		return -EOPNOTSUPP;
 
+	/* cannot change into P2P device type */
+	if (ntype == NL80211_IFTYPE_P2P_DEVICE)
+		return -EOPNOTSUPP;
+
 	if (!rdev->ops->change_virtual_intf ||
 	    !(rdev->wiphy.interface_modes & (1 << ntype)))
 		return -EOPNOTSUPP;
@@ -877,6 +881,9 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 		case NUM_NL80211_IFTYPES:
 			/* not happening */
 			break;
+		case NL80211_IFTYPE_P2P_DEVICE:
+			WARN_ON(1);
+			break;
 		}
 	}
 
@@ -1041,8 +1048,15 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
 	list_for_each_entry(wdev_iter, &rdev->wdev_list, list) {
 		if (wdev_iter == wdev)
 			continue;
-		if (!netif_running(wdev_iter->netdev))
-			continue;
+		if (wdev_iter->netdev) {
+			if (!netif_running(wdev_iter->netdev))
+				continue;
+		} else if (wdev_iter->iftype == NL80211_IFTYPE_P2P_DEVICE) {
+			if (!wdev_iter->p2p_started)
+				continue;
+		} else {
+			WARN_ON(1);
+		}
 
 		if (rdev->wiphy.software_iftypes & BIT(wdev_iter->iftype))
 			continue;
-- 
cgit v1.2.3


From f142c6b906da451ded2c7a8e17b2a0e6fee3e891 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 18 Jun 2012 20:07:15 +0200
Subject: mac80211: support P2P Device abstraction

After cfg80211 got a P2P Device abstraction, add
support to mac80211. Whether it really is supported
or not will depend on whether or not the driver has
support for it, but mac80211 needs to change to be
able to support drivers that need a P2P Device.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/cfg.c         |  18 ++++
 net/mac80211/driver-ops.h  |   2 +-
 net/mac80211/ieee80211_i.h |   4 +
 net/mac80211/iface.c       | 231 +++++++++++++++++++++++++++++----------------
 net/mac80211/main.c        |   9 ++
 net/mac80211/offchannel.c  |   6 ++
 net/mac80211/rx.c          |  14 ++-
 net/mac80211/status.c      |  22 +++--
 net/mac80211/trace.h       |   2 +-
 net/mac80211/util.c        |  14 ++-
 10 files changed, 226 insertions(+), 96 deletions(-)

(limited to 'net/mac80211/iface.c')

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 8052a7ad03a6..69b322f6ca2e 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -102,6 +102,18 @@ static int ieee80211_change_iface(struct wiphy *wiphy,
 	return 0;
 }
 
+static int ieee80211_start_p2p_device(struct wiphy *wiphy,
+				      struct wireless_dev *wdev)
+{
+	return ieee80211_do_open(wdev, true);
+}
+
+static void ieee80211_stop_p2p_device(struct wiphy *wiphy,
+				      struct wireless_dev *wdev)
+{
+	ieee80211_sdata_stop(IEEE80211_WDEV_TO_SUB_IF(wdev));
+}
+
 static int ieee80211_set_noack_map(struct wiphy *wiphy,
 				  struct net_device *dev,
 				  u16 noack_map)
@@ -1774,6 +1786,7 @@ static int ieee80211_scan(struct wiphy *wiphy,
 	case NL80211_IFTYPE_ADHOC:
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_P2P_CLIENT:
+	case NL80211_IFTYPE_P2P_DEVICE:
 		break;
 	case NL80211_IFTYPE_P2P_GO:
 		if (sdata->local->ops->hw_scan)
@@ -2461,6 +2474,9 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 		if (!sdata->u.mgd.associated)
 			need_offchan = true;
 		break;
+	case NL80211_IFTYPE_P2P_DEVICE:
+		need_offchan = true;
+		break;
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -3013,6 +3029,8 @@ struct cfg80211_ops mac80211_config_ops = {
 	.add_virtual_intf = ieee80211_add_iface,
 	.del_virtual_intf = ieee80211_del_iface,
 	.change_virtual_intf = ieee80211_change_iface,
+	.start_p2p_device = ieee80211_start_p2p_device,
+	.stop_p2p_device = ieee80211_stop_p2p_device,
 	.add_key = ieee80211_add_key,
 	.del_key = ieee80211_del_key,
 	.get_key = ieee80211_get_key,
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index a81154d27291..da9003b20004 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -9,7 +9,7 @@ static inline void check_sdata_in_driver(struct ieee80211_sub_if_data *sdata)
 {
 	WARN(!(sdata->flags & IEEE80211_SDATA_IN_DRIVER),
 	     "%s:  Failed check-sdata-in-driver check, flags: 0x%x\n",
-	     sdata->dev->name, sdata->flags);
+	     sdata->dev ? sdata->dev->name : sdata->name, sdata->flags);
 }
 
 static inline struct ieee80211_sub_if_data *
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 2a80698b6324..0b81fa807179 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1080,6 +1080,8 @@ struct ieee80211_local {
 	struct idr ack_status_frames;
 	spinlock_t ack_status_lock;
 
+	struct ieee80211_sub_if_data __rcu *p2p_sdata;
+
 	/* dummy netdev for use w/ NAPI */
 	struct net_device napi_dev;
 
@@ -1296,6 +1298,8 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local);
 void ieee80211_recalc_idle(struct ieee80211_local *local);
 void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata,
 				    const int offset);
+int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up);
+void ieee80211_sdata_stop(struct ieee80211_sub_if_data *sdata);
 
 static inline bool ieee80211_sdata_running(struct ieee80211_sub_if_data *sdata)
 {
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 366d9d3e84c4..152aeea14c85 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -100,6 +100,10 @@ static u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
 			sdata->vif.bss_conf.idle = true;
 			continue;
 		}
+
+		if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE)
+			continue;
+
 		/* count everything else */
 		sdata->vif.bss_conf.idle = false;
 		count++;
@@ -121,7 +125,8 @@ static u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
 
 	list_for_each_entry(sdata, &local->interfaces, list) {
 		if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
-		    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+		    sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
+		    sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE)
 			continue;
 		if (sdata->old_idle == sdata->vif.bss_conf.idle)
 			continue;
@@ -204,6 +209,8 @@ static inline int identical_mac_addr_allowed(int type1, int type2)
 {
 	return type1 == NL80211_IFTYPE_MONITOR ||
 		type2 == NL80211_IFTYPE_MONITOR ||
+		type1 == NL80211_IFTYPE_P2P_DEVICE ||
+		type2 == NL80211_IFTYPE_P2P_DEVICE ||
 		(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) ||
 		(type1 == NL80211_IFTYPE_WDS &&
 			(type2 == NL80211_IFTYPE_WDS ||
@@ -406,9 +413,10 @@ static void ieee80211_del_virtual_monitor(struct ieee80211_local *local)
  * an error on interface type changes that have been pre-checked, so most
  * checks should be in ieee80211_check_concurrent_iface.
  */
-static int ieee80211_do_open(struct net_device *dev, bool coming_up)
+int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
+	struct net_device *dev = wdev->netdev;
 	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
 	u32 changed = 0;
@@ -443,13 +451,13 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_MONITOR:
 	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_P2P_DEVICE:
 		/* no special treatment */
 		break;
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case NUM_NL80211_IFTYPES:
 	case NL80211_IFTYPE_P2P_CLIENT:
 	case NL80211_IFTYPE_P2P_GO:
-	case NL80211_IFTYPE_P2P_DEVICE:
 		/* cannot happen */
 		WARN_ON(1);
 		break;
@@ -472,7 +480,7 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 	 * Copy the hopefully now-present MAC address to
 	 * this interface, if it has the special null one.
 	 */
-	if (is_zero_ether_addr(dev->dev_addr)) {
+	if (dev && is_zero_ether_addr(dev->dev_addr)) {
 		memcpy(dev->dev_addr,
 		       local->hw.wiphy->perm_addr,
 		       ETH_ALEN);
@@ -537,7 +545,8 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 			local->fif_probe_req++;
 		}
 
-		changed |= ieee80211_reset_erp_info(sdata);
+		if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE)
+			changed |= ieee80211_reset_erp_info(sdata);
 		ieee80211_bss_info_change_notify(sdata, changed);
 
 		switch (sdata->vif.type) {
@@ -548,6 +557,7 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 			netif_carrier_off(dev);
 			break;
 		case NL80211_IFTYPE_WDS:
+		case NL80211_IFTYPE_P2P_DEVICE:
 			break;
 		default:
 			netif_carrier_on(dev);
@@ -584,6 +594,8 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 
 		rate_control_rate_init(sta);
 		netif_carrier_on(dev);
+	} else if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) {
+		rcu_assign_pointer(local->p2p_sdata, sdata);
 	}
 
 	/*
@@ -609,7 +621,8 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 
 	ieee80211_recalc_ps(local, -1);
 
-	netif_tx_start_all_queues(dev);
+	if (dev)
+		netif_tx_start_all_queues(dev);
 
 	return 0;
  err_del_interface:
@@ -639,7 +652,7 @@ static int ieee80211_open(struct net_device *dev)
 	if (err)
 		return err;
 
-	return ieee80211_do_open(dev, true);
+	return ieee80211_do_open(&sdata->wdev, true);
 }
 
 static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
@@ -660,7 +673,8 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 	/*
 	 * Stop TX on this interface first.
 	 */
-	netif_tx_stop_all_queues(sdata->dev);
+	if (sdata->dev)
+		netif_tx_stop_all_queues(sdata->dev);
 
 	ieee80211_roc_purge(sdata);
 
@@ -699,14 +713,16 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		local->fif_probe_req--;
 	}
 
-	netif_addr_lock_bh(sdata->dev);
-	spin_lock_bh(&local->filter_lock);
-	__hw_addr_unsync(&local->mc_list, &sdata->dev->mc,
-			 sdata->dev->addr_len);
-	spin_unlock_bh(&local->filter_lock);
-	netif_addr_unlock_bh(sdata->dev);
+	if (sdata->dev) {
+		netif_addr_lock_bh(sdata->dev);
+		spin_lock_bh(&local->filter_lock);
+		__hw_addr_unsync(&local->mc_list, &sdata->dev->mc,
+				 sdata->dev->addr_len);
+		spin_unlock_bh(&local->filter_lock);
+		netif_addr_unlock_bh(sdata->dev);
 
-	ieee80211_configure_filter(local);
+		ieee80211_configure_filter(local);
+	}
 
 	del_timer_sync(&local->dynamic_ps_timer);
 	cancel_work_sync(&local->dynamic_ps_enable_work);
@@ -767,6 +783,10 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		ieee80211_adjust_monitor_flags(sdata, -1);
 		ieee80211_configure_filter(local);
 		break;
+	case NL80211_IFTYPE_P2P_DEVICE:
+		/* relies on synchronize_rcu() below */
+		rcu_assign_pointer(local->p2p_sdata, NULL);
+		/* fall through */
 	default:
 		flush_work(&sdata->work);
 		/*
@@ -877,9 +897,8 @@ static void ieee80211_set_multicast_list(struct net_device *dev)
  * Called when the netdev is removed or, by the code below, before
  * the interface type changes.
  */
-static void ieee80211_teardown_sdata(struct net_device *dev)
+static void ieee80211_teardown_sdata(struct ieee80211_sub_if_data *sdata)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct ieee80211_local *local = sdata->local;
 	int flushed;
 	int i;
@@ -900,6 +919,11 @@ static void ieee80211_teardown_sdata(struct net_device *dev)
 	WARN_ON(flushed);
 }
 
+static void ieee80211_uninit(struct net_device *dev)
+{
+	ieee80211_teardown_sdata(IEEE80211_DEV_TO_SUB_IF(dev));
+}
+
 static u16 ieee80211_netdev_select_queue(struct net_device *dev,
 					 struct sk_buff *skb)
 {
@@ -909,7 +933,7 @@ static u16 ieee80211_netdev_select_queue(struct net_device *dev,
 static const struct net_device_ops ieee80211_dataif_ops = {
 	.ndo_open		= ieee80211_open,
 	.ndo_stop		= ieee80211_stop,
-	.ndo_uninit		= ieee80211_teardown_sdata,
+	.ndo_uninit		= ieee80211_uninit,
 	.ndo_start_xmit		= ieee80211_subif_start_xmit,
 	.ndo_set_rx_mode	= ieee80211_set_multicast_list,
 	.ndo_change_mtu 	= ieee80211_change_mtu,
@@ -940,7 +964,7 @@ static u16 ieee80211_monitor_select_queue(struct net_device *dev,
 static const struct net_device_ops ieee80211_monitorif_ops = {
 	.ndo_open		= ieee80211_open,
 	.ndo_stop		= ieee80211_stop,
-	.ndo_uninit		= ieee80211_teardown_sdata,
+	.ndo_uninit		= ieee80211_uninit,
 	.ndo_start_xmit		= ieee80211_monitor_start_xmit,
 	.ndo_set_rx_mode	= ieee80211_set_multicast_list,
 	.ndo_change_mtu 	= ieee80211_change_mtu,
@@ -1099,7 +1123,6 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
 	/* and set some type-dependent values */
 	sdata->vif.type = type;
 	sdata->vif.p2p = false;
-	sdata->dev->netdev_ops = &ieee80211_dataif_ops;
 	sdata->wdev.iftype = type;
 
 	sdata->control_port_protocol = cpu_to_be16(ETH_P_PAE);
@@ -1107,8 +1130,11 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
 
 	sdata->noack_map = 0;
 
-	/* only monitor differs */
-	sdata->dev->type = ARPHRD_ETHER;
+	/* only monitor/p2p-device differ */
+	if (sdata->dev) {
+		sdata->dev->netdev_ops = &ieee80211_dataif_ops;
+		sdata->dev->type = ARPHRD_ETHER;
+	}
 
 	skb_queue_head_init(&sdata->skb_queue);
 	INIT_WORK(&sdata->work, ieee80211_iface_work);
@@ -1146,9 +1172,8 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
 		break;
 	case NL80211_IFTYPE_WDS:
 	case NL80211_IFTYPE_AP_VLAN:
-		break;
 	case NL80211_IFTYPE_P2P_DEVICE:
-		/* not yet supported */
+		break;
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case NUM_NL80211_IFTYPES:
 		BUG();
@@ -1215,7 +1240,7 @@ static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
 
 	ieee80211_do_stop(sdata, false);
 
-	ieee80211_teardown_sdata(sdata->dev);
+	ieee80211_teardown_sdata(sdata);
 
 	ret = drv_change_interface(local, sdata, internal_type, p2p);
 	if (ret)
@@ -1230,7 +1255,7 @@ static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
 
 	ieee80211_setup_sdata(sdata, type);
 
-	err = ieee80211_do_open(sdata->dev, false);
+	err = ieee80211_do_open(&sdata->wdev, false);
 	WARN(err, "type change: do_open returned %d", err);
 
 	return ret;
@@ -1257,7 +1282,7 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
 			return ret;
 	} else {
 		/* Purge and reset type-dependent state. */
-		ieee80211_teardown_sdata(sdata->dev);
+		ieee80211_teardown_sdata(sdata);
 		ieee80211_setup_sdata(sdata, type);
 	}
 
@@ -1273,8 +1298,7 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
 }
 
 static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
-				       struct net_device *dev,
-				       enum nl80211_iftype type)
+				       u8 *perm_addr, enum nl80211_iftype type)
 {
 	struct ieee80211_sub_if_data *sdata;
 	u64 mask, start, addr, val, inc;
@@ -1283,7 +1307,7 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
 	int i;
 
 	/* default ... something at least */
-	memcpy(dev->perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
+	memcpy(perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
 
 	if (is_zero_ether_addr(local->hw.wiphy->addr_mask) &&
 	    local->hw.wiphy->n_addresses <= 1)
@@ -1302,7 +1326,7 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
 		list_for_each_entry(sdata, &local->interfaces, list) {
 			if (sdata->vif.type != NL80211_IFTYPE_AP)
 				continue;
-			memcpy(dev->perm_addr, sdata->vif.addr, ETH_ALEN);
+			memcpy(perm_addr, sdata->vif.addr, ETH_ALEN);
 			break;
 		}
 		/* keep default if no AP interface present */
@@ -1321,7 +1345,7 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
 			}
 
 			if (!used) {
-				memcpy(dev->perm_addr,
+				memcpy(perm_addr,
 				       local->hw.wiphy->addresses[i].addr,
 				       ETH_ALEN);
 				break;
@@ -1372,7 +1396,7 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
 			}
 
 			if (!used) {
-				memcpy(dev->perm_addr, tmp_addr, ETH_ALEN);
+				memcpy(perm_addr, tmp_addr, ETH_ALEN);
 				break;
 			}
 			addr = (start & ~mask) | (val & mask);
@@ -1388,49 +1412,68 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 		     struct wireless_dev **new_wdev, enum nl80211_iftype type,
 		     struct vif_params *params)
 {
-	struct net_device *ndev;
+	struct net_device *ndev = NULL;
 	struct ieee80211_sub_if_data *sdata = NULL;
 	int ret, i;
 	int txqs = 1;
 
 	ASSERT_RTNL();
 
-	if (local->hw.queues >= IEEE80211_NUM_ACS)
-		txqs = IEEE80211_NUM_ACS;
-
-	ndev = alloc_netdev_mqs(sizeof(*sdata) + local->hw.vif_data_size,
-				name, ieee80211_if_setup, txqs, 1);
-	if (!ndev)
-		return -ENOMEM;
-	dev_net_set(ndev, wiphy_net(local->hw.wiphy));
-
-	ndev->needed_headroom = local->tx_headroom +
-				4*6 /* four MAC addresses */
-				+ 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */
-				+ 6 /* mesh */
-				+ 8 /* rfc1042/bridge tunnel */
-				- ETH_HLEN /* ethernet hard_header_len */
-				+ IEEE80211_ENCRYPT_HEADROOM;
-	ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
-
-	ret = dev_alloc_name(ndev, ndev->name);
-	if (ret < 0)
-		goto fail;
-
-	ieee80211_assign_perm_addr(local, ndev, type);
-	memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
-	SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
-
-	/* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
-	sdata = netdev_priv(ndev);
-	ndev->ieee80211_ptr = &sdata->wdev;
-	memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN);
-	memcpy(sdata->name, ndev->name, IFNAMSIZ);
+	if (type == NL80211_IFTYPE_P2P_DEVICE) {
+		struct wireless_dev *wdev;
+
+		sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size,
+				GFP_KERNEL);
+		if (!sdata)
+			return -ENOMEM;
+		wdev = &sdata->wdev;
+
+		sdata->dev = NULL;
+		strlcpy(sdata->name, name, IFNAMSIZ);
+		ieee80211_assign_perm_addr(local, wdev->address, type);
+		memcpy(sdata->vif.addr, wdev->address, ETH_ALEN);
+	} else {
+		if (local->hw.queues >= IEEE80211_NUM_ACS)
+			txqs = IEEE80211_NUM_ACS;
+
+		ndev = alloc_netdev_mqs(sizeof(*sdata) +
+					local->hw.vif_data_size,
+					name, ieee80211_if_setup, txqs, 1);
+		if (!ndev)
+			return -ENOMEM;
+		dev_net_set(ndev, wiphy_net(local->hw.wiphy));
+
+		ndev->needed_headroom = local->tx_headroom +
+					4*6 /* four MAC addresses */
+					+ 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */
+					+ 6 /* mesh */
+					+ 8 /* rfc1042/bridge tunnel */
+					- ETH_HLEN /* ethernet hard_header_len */
+					+ IEEE80211_ENCRYPT_HEADROOM;
+		ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
+
+		ret = dev_alloc_name(ndev, ndev->name);
+		if (ret < 0) {
+			free_netdev(ndev);
+			return ret;
+		}
+
+		ieee80211_assign_perm_addr(local, ndev->perm_addr, type);
+		memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
+		SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
+
+		/* don't use IEEE80211_DEV_TO_SUB_IF -- it checks too much */
+		sdata = netdev_priv(ndev);
+		ndev->ieee80211_ptr = &sdata->wdev;
+		memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN);
+		memcpy(sdata->name, ndev->name, IFNAMSIZ);
+
+		sdata->dev = ndev;
+	}
 
 	/* initialise type-independent data */
 	sdata->wdev.wiphy = local->hw.wiphy;
 	sdata->local = local;
-	sdata->dev = ndev;
 #ifdef CONFIG_INET
 	sdata->arp_filter_state = true;
 #endif
@@ -1459,17 +1502,21 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 	/* setup type-dependent data */
 	ieee80211_setup_sdata(sdata, type);
 
-	if (params) {
-		ndev->ieee80211_ptr->use_4addr = params->use_4addr;
-		if (type == NL80211_IFTYPE_STATION)
-			sdata->u.mgd.use_4addr = params->use_4addr;
-	}
+	if (ndev) {
+		if (params) {
+			ndev->ieee80211_ptr->use_4addr = params->use_4addr;
+			if (type == NL80211_IFTYPE_STATION)
+				sdata->u.mgd.use_4addr = params->use_4addr;
+		}
 
-	ndev->features |= local->hw.netdev_features;
+		ndev->features |= local->hw.netdev_features;
 
-	ret = register_netdevice(ndev);
-	if (ret)
-		goto fail;
+		ret = register_netdevice(ndev);
+		if (ret) {
+			free_netdev(ndev);
+			return ret;
+		}
+	}
 
 	mutex_lock(&local->iflist_mtx);
 	list_add_tail_rcu(&sdata->list, &local->interfaces);
@@ -1479,10 +1526,6 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 		*new_wdev = &sdata->wdev;
 
 	return 0;
-
- fail:
-	free_netdev(ndev);
-	return ret;
 }
 
 void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
@@ -1494,7 +1537,21 @@ void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
 	mutex_unlock(&sdata->local->iflist_mtx);
 
 	synchronize_rcu();
-	unregister_netdevice(sdata->dev);
+
+	if (sdata->dev) {
+		unregister_netdevice(sdata->dev);
+	} else {
+		cfg80211_unregister_wdev(&sdata->wdev);
+		kfree(sdata);
+	}
+}
+
+void ieee80211_sdata_stop(struct ieee80211_sub_if_data *sdata)
+{
+	if (WARN_ON_ONCE(!test_bit(SDATA_STATE_RUNNING, &sdata->state)))
+		return;
+	ieee80211_do_stop(sdata, true);
+	ieee80211_teardown_sdata(sdata);
 }
 
 /*
@@ -1505,6 +1562,7 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local)
 {
 	struct ieee80211_sub_if_data *sdata, *tmp;
 	LIST_HEAD(unreg_list);
+	LIST_HEAD(wdev_list);
 
 	ASSERT_RTNL();
 
@@ -1512,11 +1570,20 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local)
 	list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
 		list_del(&sdata->list);
 
-		unregister_netdevice_queue(sdata->dev, &unreg_list);
+		if (sdata->dev)
+			unregister_netdevice_queue(sdata->dev, &unreg_list);
+		else
+			list_add(&sdata->list, &wdev_list);
 	}
 	mutex_unlock(&local->iflist_mtx);
 	unregister_netdevice_many(&unreg_list);
 	list_del(&unreg_list);
+
+	list_for_each_entry_safe(sdata, tmp, &wdev_list, list) {
+		list_del(&sdata->list);
+		cfg80211_unregister_wdev(&sdata->wdev);
+		kfree(sdata);
+	}
 }
 
 static int netdev_notify(struct notifier_block *nb,
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index c26e231c733a..e706f9e5b051 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -207,6 +207,10 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
 		sdata->vif.bss_conf.bssid = NULL;
 	else if (ieee80211_vif_is_mesh(&sdata->vif)) {
 		sdata->vif.bss_conf.bssid = zero;
+	} else if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) {
+		sdata->vif.bss_conf.bssid = sdata->vif.addr;
+		WARN_ONCE(changed & ~(BSS_CHANGED_IDLE),
+			  "P2P Device BSS changed %#x", changed);
 	} else {
 		WARN_ON(1);
 		return;
@@ -514,6 +518,11 @@ ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = {
 			BIT(IEEE80211_STYPE_AUTH >> 4) |
 			BIT(IEEE80211_STYPE_DEAUTH >> 4),
 	},
+	[NL80211_IFTYPE_P2P_DEVICE] = {
+		.tx = 0xffff,
+		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+			BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
+	},
 };
 
 static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = {
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index 635c3250c668..507121dad082 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -116,6 +116,9 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local,
 		if (!ieee80211_sdata_running(sdata))
 			continue;
 
+		if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE)
+			continue;
+
 		if (sdata->vif.type != NL80211_IFTYPE_MONITOR)
 			set_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
 
@@ -144,6 +147,9 @@ void ieee80211_offchannel_return(struct ieee80211_local *local,
 
 	mutex_lock(&local->iflist_mtx);
 	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE)
+			continue;
+
 		if (sdata->vif.type != NL80211_IFTYPE_MONITOR)
 			clear_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
 
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 78bf6c7e80c8..f5258ebc15be 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2812,8 +2812,7 @@ static int prepare_for_handlers(struct ieee80211_rx_data *rx,
 		if (!bssid) {
 			if (!ether_addr_equal(sdata->vif.addr, hdr->addr1))
 				return 0;
-		} else if (!ieee80211_bssid_match(bssid,
-					sdata->vif.addr)) {
+		} else if (!ieee80211_bssid_match(bssid, sdata->vif.addr)) {
 			/*
 			 * Accept public action frames even when the
 			 * BSSID doesn't match, this is used for P2P
@@ -2833,9 +2832,18 @@ static int prepare_for_handlers(struct ieee80211_rx_data *rx,
 		if (!ether_addr_equal(sdata->u.wds.remote_addr, hdr->addr2))
 			return 0;
 		break;
+	case NL80211_IFTYPE_P2P_DEVICE:
+		if (!ieee80211_is_public_action(hdr, skb->len) &&
+		    !ieee80211_is_probe_req(hdr->frame_control) &&
+		    !ieee80211_is_probe_resp(hdr->frame_control) &&
+		    !ieee80211_is_beacon(hdr->frame_control))
+			return 0;
+		if (!ether_addr_equal(sdata->vif.addr, hdr->addr1))
+			status->rx_flags &= ~IEEE80211_RX_RA_MATCH;
+		break;
 	default:
 		/* should never get here */
-		WARN_ON(1);
+		WARN_ON_ONCE(1);
 		break;
 	}
 
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 8cd72914cdaf..b0801b7d572d 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -519,19 +519,27 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 		u64 cookie = (unsigned long)skb;
 		acked = info->flags & IEEE80211_TX_STAT_ACK;
 
-		/*
-		 * TODO: When we have non-netdev frame TX,
-		 * we cannot use skb->dev->ieee80211_ptr
-		 */
-
 		if (ieee80211_is_nullfunc(hdr->frame_control) ||
-		    ieee80211_is_qos_nullfunc(hdr->frame_control))
+		    ieee80211_is_qos_nullfunc(hdr->frame_control)) {
 			cfg80211_probe_status(skb->dev, hdr->addr1,
 					      cookie, acked, GFP_ATOMIC);
-		else
+		} else if (skb->dev) {
 			cfg80211_mgmt_tx_status(
 				skb->dev->ieee80211_ptr, cookie, skb->data,
 				skb->len, acked, GFP_ATOMIC);
+		} else {
+			struct ieee80211_sub_if_data *p2p_sdata;
+
+			rcu_read_lock();
+
+			p2p_sdata = rcu_dereference(local->p2p_sdata);
+			if (p2p_sdata) {
+				cfg80211_mgmt_tx_status(
+					&p2p_sdata->wdev, cookie, skb->data,
+					skb->len, acked, GFP_ATOMIC);
+			}
+			rcu_read_unlock();
+		}
 	}
 
 	if (unlikely(info->ack_frame_id)) {
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index c6d33b55b2df..65e9a2a1a3e1 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -24,7 +24,7 @@
 			__string(vif_name, sdata->dev ? sdata->dev->name : "<nodev>")
 #define VIF_ASSIGN	__entry->vif_type = sdata->vif.type; __entry->sdata = sdata;	\
 			__entry->p2p = sdata->vif.p2p;					\
-			__assign_str(vif_name, sdata->dev ? sdata->dev->name : "<nodev>")
+			__assign_str(vif_name, sdata->dev ? sdata->dev->name : sdata->name)
 #define VIF_PR_FMT	" vif:%s(%d%s)"
 #define VIF_PR_ARG	__get_str(vif_name), __entry->vif_type, __entry->p2p ? "/p2p" : ""
 
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 9a4e4e30ea6c..79bce870ad78 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -276,6 +276,9 @@ void ieee80211_propagate_queue_wake(struct ieee80211_local *local, int queue)
 	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
 		int ac;
 
+		if (!sdata->dev)
+			continue;
+
 		if (test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state))
 			continue;
 
@@ -364,6 +367,9 @@ static void __ieee80211_stop_queue(struct ieee80211_hw *hw, int queue,
 	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
 		int ac;
 
+		if (!sdata->dev)
+			continue;
+
 		for (ac = 0; ac < n_acs; ac++) {
 			if (sdata->vif.hw_queue[ac] == queue ||
 			    sdata->vif.cab_queue == queue)
@@ -902,7 +908,8 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata,
 		drv_conf_tx(local, sdata, ac, &qparam);
 	}
 
-	if (sdata->vif.type != NL80211_IFTYPE_MONITOR) {
+	if (sdata->vif.type != NL80211_IFTYPE_MONITOR &&
+	    sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE) {
 		sdata->vif.bss_conf.qos = enable_qos;
 		if (bss_notify)
 			ieee80211_bss_info_change_notify(sdata,
@@ -1391,7 +1398,8 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 			/* ignore virtual */
 			break;
 		case NL80211_IFTYPE_P2P_DEVICE:
-			/* not yet supported */
+			changed = BSS_CHANGED_IDLE;
+			break;
 		case NL80211_IFTYPE_UNSPECIFIED:
 		case NUM_NL80211_IFTYPES:
 		case NL80211_IFTYPE_P2P_CLIENT:
@@ -1578,6 +1586,8 @@ void ieee80211_recalc_smps(struct ieee80211_local *local)
 	list_for_each_entry(sdata, &local->interfaces, list) {
 		if (!ieee80211_sdata_running(sdata))
 			continue;
+		if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE)
+			continue;
 		if (sdata->vif.type != NL80211_IFTYPE_STATION)
 			goto set;
 
-- 
cgit v1.2.3


From 6d71117a279aa30574a8af6c7348570c292285c2 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 19 Jun 2012 17:19:44 +0200
Subject: mac80211: add IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF

Some devices like the current iwlwifi implementation
require that the P2P interface address match the P2P
Device address (only one P2P interface is supported.)
Add the HW flag IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF
that allows drivers to request that P2P Interfaces
added while a P2P Device is active get the same MAC
address by default.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/mac80211.h |  5 +++++
 net/mac80211/iface.c   | 15 ++++++++++++++-
 2 files changed, 19 insertions(+), 1 deletion(-)

(limited to 'net/mac80211/iface.c')

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index edc235c51a68..71f8262fc1df 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1241,6 +1241,10 @@ struct ieee80211_tx_control {
  *	queue mapping in order to use different queues (not just one per AC)
  *	for different virtual interfaces. See the doc section on HW queue
  *	control for more details.
+ *
+ * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any
+ *	P2P Interface. This will be honoured even if more than one interface
+ *	is supported.
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
@@ -1268,6 +1272,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_AP_LINK_PS				= 1<<22,
 	IEEE80211_HW_TX_AMPDU_SETUP_IN_HW		= 1<<23,
 	IEEE80211_HW_SCAN_WHILE_IDLE			= 1<<24,
+	IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF		= 1<<25,
 };
 
 /**
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 152aeea14c85..59f8adc2aa5f 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1313,7 +1313,6 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
 	    local->hw.wiphy->n_addresses <= 1)
 		return;
 
-
 	mutex_lock(&local->iflist_mtx);
 
 	switch (type) {
@@ -1331,6 +1330,19 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
 		}
 		/* keep default if no AP interface present */
 		break;
+	case NL80211_IFTYPE_P2P_CLIENT:
+	case NL80211_IFTYPE_P2P_GO:
+		if (local->hw.flags & IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF) {
+			list_for_each_entry(sdata, &local->interfaces, list) {
+				if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE)
+					continue;
+				if (!ieee80211_sdata_running(sdata))
+					continue;
+				memcpy(perm_addr, sdata->vif.addr, ETH_ALEN);
+				goto out_unlock;
+			}
+		}
+		/* otherwise fall through */
 	default:
 		/* assign a new address if possible -- try n_addresses first */
 		for (i = 0; i < local->hw.wiphy->n_addresses; i++) {
@@ -1405,6 +1417,7 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
 		break;
 	}
 
+ out_unlock:
 	mutex_unlock(&local->iflist_mtx);
 }
 
-- 
cgit v1.2.3


From 0ef24e528f27683620d78c3393b3df73d804828c Mon Sep 17 00:00:00 2001
From: Ilan Peer <ilan.peer@intel.com>
Date: Tue, 21 Aug 2012 12:43:35 +0300
Subject: mac80211: Do not check for valid hw_queues for P2P_DEVICE

A P2P Device interface does not have a netdev, and is not
expected to be used for transmitting data, so there is no
need to assign hw queues for it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/iface.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'net/mac80211/iface.c')

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 59f8adc2aa5f..d747da541747 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -278,13 +278,15 @@ static int ieee80211_check_queues(struct ieee80211_sub_if_data *sdata)
 	int n_queues = sdata->local->hw.queues;
 	int i;
 
-	for (i = 0; i < IEEE80211_NUM_ACS; i++) {
-		if (WARN_ON_ONCE(sdata->vif.hw_queue[i] ==
-				 IEEE80211_INVAL_HW_QUEUE))
-			return -EINVAL;
-		if (WARN_ON_ONCE(sdata->vif.hw_queue[i] >=
-				 n_queues))
-			return -EINVAL;
+	if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE) {
+		for (i = 0; i < IEEE80211_NUM_ACS; i++) {
+			if (WARN_ON_ONCE(sdata->vif.hw_queue[i] ==
+					 IEEE80211_INVAL_HW_QUEUE))
+				return -EINVAL;
+			if (WARN_ON_ONCE(sdata->vif.hw_queue[i] >=
+					 n_queues))
+				return -EINVAL;
+		}
 	}
 
 	if ((sdata->vif.type != NL80211_IFTYPE_AP) ||
-- 
cgit v1.2.3


From b22cfcfcae5b2c1e9b43543b6a23e5ef517de8f8 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Sun, 9 Sep 2012 14:43:51 +0300
Subject: mac80211: use call_rcu() on sta deletion

mac80211 calls synchronize_rcu() on sta deletion,
which increase the roaming time significantly.

Convert it into a call_rcu() mechanism, in order
to avoid blocking. Since some of the cleanup
functions might sleep, schedule from the call_rcu
callback a new work that will do the actual cleanup.

In order to make sure the cleanup occurs before
the interface went down, flush local->workqueue
on ieee80211_do_stop().

Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/iface.c    |  15 ++++--
 net/mac80211/sta_info.c | 121 +++++++++++++++++++++++++++---------------------
 net/mac80211/sta_info.h |   2 +
 3 files changed, 81 insertions(+), 57 deletions(-)

(limited to 'net/mac80211/iface.c')

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index d747da541747..6f8a73c64fb3 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -793,11 +793,20 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		flush_work(&sdata->work);
 		/*
 		 * When we get here, the interface is marked down.
-		 * Call synchronize_rcu() to wait for the RX path
+		 * Call rcu_barrier() to wait both for the RX path
 		 * should it be using the interface and enqueuing
-		 * frames at this very time on another CPU.
+		 * frames at this very time on another CPU, and
+		 * for the sta free call_rcu callbacks.
 		 */
-		synchronize_rcu();
+		rcu_barrier();
+
+		/*
+		 * free_sta_rcu() enqueues a work for the actual
+		 * sta cleanup, so we need to flush it while
+		 * sdata is still valid.
+		 */
+		flush_workqueue(local->workqueue);
+
 		skb_queue_purge(&sdata->skb_queue);
 
 		/*
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 06fa75ceb025..9c8cd8b8f753 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -91,6 +91,70 @@ static int sta_info_hash_del(struct ieee80211_local *local,
 	return -ENOENT;
 }
 
+static void free_sta_work(struct work_struct *wk)
+{
+	struct sta_info *sta = container_of(wk, struct sta_info, free_sta_wk);
+	int ac, i;
+	struct tid_ampdu_tx *tid_tx;
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sdata->local;
+
+	/*
+	 * At this point, when being called as call_rcu callback,
+	 * neither mac80211 nor the driver can reference this
+	 * sta struct any more except by still existing timers
+	 * associated with this station that we clean up below.
+	 */
+
+	if (test_sta_flag(sta, WLAN_STA_PS_STA)) {
+		BUG_ON(!sdata->bss);
+
+		clear_sta_flag(sta, WLAN_STA_PS_STA);
+
+		atomic_dec(&sdata->bss->num_sta_ps);
+		sta_info_recalc_tim(sta);
+	}
+
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+		local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]);
+		__skb_queue_purge(&sta->ps_tx_buf[ac]);
+		__skb_queue_purge(&sta->tx_filtered[ac]);
+	}
+
+#ifdef CONFIG_MAC80211_MESH
+	if (ieee80211_vif_is_mesh(&sdata->vif)) {
+		mesh_accept_plinks_update(sdata);
+		mesh_plink_deactivate(sta);
+		del_timer_sync(&sta->plink_timer);
+	}
+#endif
+
+	cancel_work_sync(&sta->drv_unblock_wk);
+
+	/*
+	 * Destroy aggregation state here. It would be nice to wait for the
+	 * driver to finish aggregation stop and then clean up, but for now
+	 * drivers have to handle aggregation stop being requested, followed
+	 * directly by station destruction.
+	 */
+	for (i = 0; i < STA_TID_NUM; i++) {
+		tid_tx = rcu_dereference_raw(sta->ampdu_mlme.tid_tx[i]);
+		if (!tid_tx)
+			continue;
+		__skb_queue_purge(&tid_tx->pending);
+		kfree(tid_tx);
+	}
+
+	sta_info_free(local, sta);
+}
+
+static void free_sta_rcu(struct rcu_head *h)
+{
+	struct sta_info *sta = container_of(h, struct sta_info, rcu_head);
+
+	ieee80211_queue_work(&sta->local->hw, &sta->free_sta_wk);
+}
+
 /* protected by RCU */
 struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata,
 			      const u8 *addr)
@@ -241,6 +305,7 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 
 	spin_lock_init(&sta->lock);
 	INIT_WORK(&sta->drv_unblock_wk, sta_unblock);
+	INIT_WORK(&sta->free_sta_wk, free_sta_work);
 	INIT_WORK(&sta->ampdu_mlme.work, ieee80211_ba_session_work);
 	mutex_init(&sta->ampdu_mlme.mtx);
 
@@ -654,8 +719,7 @@ int __must_check __sta_info_destroy(struct sta_info *sta)
 {
 	struct ieee80211_local *local;
 	struct ieee80211_sub_if_data *sdata;
-	int ret, i, ac;
-	struct tid_ampdu_tx *tid_tx;
+	int ret, i;
 
 	might_sleep();
 
@@ -711,65 +775,14 @@ int __must_check __sta_info_destroy(struct sta_info *sta)
 		WARN_ON_ONCE(ret != 0);
 	}
 
-	/*
-	 * At this point, after we wait for an RCU grace period,
-	 * neither mac80211 nor the driver can reference this
-	 * sta struct any more except by still existing timers
-	 * associated with this station that we clean up below.
-	 */
-	synchronize_rcu();
-
-	if (test_sta_flag(sta, WLAN_STA_PS_STA)) {
-		BUG_ON(!sdata->bss);
-
-		clear_sta_flag(sta, WLAN_STA_PS_STA);
-
-		atomic_dec(&sdata->bss->num_sta_ps);
-		sta_info_recalc_tim(sta);
-	}
-
-	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
-		local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]);
-		__skb_queue_purge(&sta->ps_tx_buf[ac]);
-		__skb_queue_purge(&sta->tx_filtered[ac]);
-	}
-
-#ifdef CONFIG_MAC80211_MESH
-	if (ieee80211_vif_is_mesh(&sdata->vif))
-		mesh_accept_plinks_update(sdata);
-#endif
-
 	sta_dbg(sdata, "Removed STA %pM\n", sta->sta.addr);
 
-	cancel_work_sync(&sta->drv_unblock_wk);
-
 	cfg80211_del_sta(sdata->dev, sta->sta.addr, GFP_KERNEL);
 
 	rate_control_remove_sta_debugfs(sta);
 	ieee80211_sta_debugfs_remove(sta);
 
-#ifdef CONFIG_MAC80211_MESH
-	if (ieee80211_vif_is_mesh(&sta->sdata->vif)) {
-		mesh_plink_deactivate(sta);
-		del_timer_sync(&sta->plink_timer);
-	}
-#endif
-
-	/*
-	 * Destroy aggregation state here. It would be nice to wait for the
-	 * driver to finish aggregation stop and then clean up, but for now
-	 * drivers have to handle aggregation stop being requested, followed
-	 * directly by station destruction.
-	 */
-	for (i = 0; i < STA_TID_NUM; i++) {
-		tid_tx = rcu_dereference_raw(sta->ampdu_mlme.tid_tx[i]);
-		if (!tid_tx)
-			continue;
-		__skb_queue_purge(&tid_tx->pending);
-		kfree(tid_tx);
-	}
-
-	sta_info_free(local, sta);
+	call_rcu(&sta->rcu_head, free_sta_rcu);
 
 	return 0;
 }
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index a470e1123a55..c88f161f8118 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -287,6 +287,7 @@ struct sta_ampdu_mlme {
 struct sta_info {
 	/* General information, mostly static */
 	struct list_head list;
+	struct rcu_head rcu_head;
 	struct sta_info __rcu *hnext;
 	struct ieee80211_local *local;
 	struct ieee80211_sub_if_data *sdata;
@@ -297,6 +298,7 @@ struct sta_info {
 	spinlock_t lock;
 
 	struct work_struct drv_unblock_wk;
+	struct work_struct free_sta_wk;
 
 	u16 listen_interval;
 
-- 
cgit v1.2.3