From 6d0bfe22611602f36617bc7aa2ffa1bbb2f54c67 Mon Sep 17 00:00:00 2001 From: Lorenzo Colitti Date: Wed, 22 May 2013 20:17:31 +0000 Subject: net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti Signed-off-by: David S. Miller --- net/ipv6/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/ipv6/Makefile') diff --git a/net/ipv6/Makefile b/net/ipv6/Makefile index 9af088d2cdaa..470a9c008e9b 100644 --- a/net/ipv6/Makefile +++ b/net/ipv6/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_IPV6) += ipv6.o ipv6-objs := af_inet6.o anycast.o ip6_output.o ip6_input.o addrconf.o \ addrlabel.o \ route.o ip6_fib.o ipv6_sockglue.o ndisc.o udp.o udplite.o \ - raw.o icmp.o mcast.o reassembly.o tcp_ipv6.o \ + raw.o icmp.o mcast.o reassembly.o tcp_ipv6.o ping.o \ exthdrs.o datagram.o ip6_flowlabel.o inet6_connection_sock.o ipv6-offload := ip6_offload.o tcpv6_offload.o udp_offload.o exthdrs_offload.o -- cgit v1.2.3