From 47d75f7822064d024ec9207c0fc1777f983783b7 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 11 Mar 2022 23:15:19 +0200 Subject: net: dsa: report and change port dscp priority using dcbnl Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- net/dsa/slave.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+) (limited to 'net/dsa') diff --git a/net/dsa/slave.c b/net/dsa/slave.c index 97f5da81fe68..f9cecda791d5 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -1880,6 +1880,40 @@ dsa_slave_dcbnl_set_default_prio(struct net_device *dev, struct dcb_app *app) return 0; } +static int __maybe_unused +dsa_slave_dcbnl_add_dscp_prio(struct net_device *dev, struct dcb_app *app) +{ + struct dsa_port *dp = dsa_slave_to_port(dev); + struct dsa_switch *ds = dp->ds; + unsigned long mask, new_prio; + int err, port = dp->index; + u8 dscp = app->protocol; + + if (!ds->ops->port_add_dscp_prio) + return -EOPNOTSUPP; + + if (dscp >= 64) { + netdev_err(dev, "DSCP APP entry with protocol value %u is invalid\n", + dscp); + return -EINVAL; + } + + err = dcb_ieee_setapp(dev, app); + if (err) + return err; + + mask = dcb_ieee_getapp_mask(dev, app); + new_prio = __fls(mask); + + err = ds->ops->port_add_dscp_prio(ds, port, dscp, new_prio); + if (err) { + dcb_ieee_delapp(dev, app); + return err; + } + + return 0; +} + static int __maybe_unused dsa_slave_dcbnl_ieee_setapp(struct net_device *dev, struct dcb_app *app) { @@ -1892,6 +1926,8 @@ static int __maybe_unused dsa_slave_dcbnl_ieee_setapp(struct net_device *dev, return -EOPNOTSUPP; } break; + case IEEE_8021QAZ_APP_SEL_DSCP: + return dsa_slave_dcbnl_add_dscp_prio(dev, app); default: return -EOPNOTSUPP; } @@ -1924,6 +1960,30 @@ dsa_slave_dcbnl_del_default_prio(struct net_device *dev, struct dcb_app *app) return 0; } +static int __maybe_unused +dsa_slave_dcbnl_del_dscp_prio(struct net_device *dev, struct dcb_app *app) +{ + struct dsa_port *dp = dsa_slave_to_port(dev); + struct dsa_switch *ds = dp->ds; + int err, port = dp->index; + u8 dscp = app->protocol; + + if (!ds->ops->port_del_dscp_prio) + return -EOPNOTSUPP; + + err = dcb_ieee_delapp(dev, app); + if (err) + return err; + + err = ds->ops->port_del_dscp_prio(ds, port, dscp, app->priority); + if (err) { + dcb_ieee_setapp(dev, app); + return err; + } + + return 0; +} + static int __maybe_unused dsa_slave_dcbnl_ieee_delapp(struct net_device *dev, struct dcb_app *app) { @@ -1936,6 +1996,8 @@ static int __maybe_unused dsa_slave_dcbnl_ieee_delapp(struct net_device *dev, return -EOPNOTSUPP; } break; + case IEEE_8021QAZ_APP_SEL_DSCP: + return dsa_slave_dcbnl_del_dscp_prio(dev, app); default: return -EOPNOTSUPP; } @@ -1967,6 +2029,30 @@ static int dsa_slave_dcbnl_init(struct net_device *dev) return err; } + if (ds->ops->port_get_dscp_prio) { + int protocol; + + for (protocol = 0; protocol < 64; protocol++) { + struct dcb_app app = { + .selector = IEEE_8021QAZ_APP_SEL_DSCP, + .protocol = protocol, + }; + int prio; + + prio = ds->ops->port_get_dscp_prio(ds, port, protocol); + if (prio == -EOPNOTSUPP) + continue; + if (prio < 0) + return prio; + + app.priority = prio; + + err = dcb_ieee_setapp(dev, &app); + if (err) + return err; + } + } + return 0; } -- cgit v1.2.3