From 790317e1b266c776765a4bdcedefea706ff0fada Mon Sep 17 00:00:00 2001 From: Zefan Li Date: Fri, 13 Feb 2015 11:19:49 +0800 Subject: cpuset: initialize effective masks when clone_children is enabled If clone_children is enabled, effective masks won't be initialized due to the bug: # mount -t cgroup -o cpuset xxx /mnt # echo 1 > cgroup.clone_children # mkdir /mnt/tmp # cat /mnt/tmp/ # cat cpuset.effective_cpus # cat cpuset.cpus 0-15 And then this cpuset won't constrain the tasks in it. Either the bug or the fix has no effect on unified hierarchy, as there's no clone_chidren flag there any more. Reported-by: Christian Brauner Reported-by: Serge Hallyn Cc: # 3.17+ Signed-off-by: Zefan Li Signed-off-by: Tejun Heo Tested-by: Serge Hallyn --- kernel/cpuset.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'kernel') diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 1d1fe9361d29..89d4ed08afba 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1979,7 +1979,9 @@ static int cpuset_css_online(struct cgroup_subsys_state *css) spin_lock_irq(&callback_lock); cs->mems_allowed = parent->mems_allowed; + cs->effective_mems = parent->mems_allowed; cpumask_copy(cs->cpus_allowed, parent->cpus_allowed); + cpumask_copy(cs->effective_cpus, parent->cpus_allowed); spin_unlock_irq(&callback_lock); out_unlock: mutex_unlock(&cpuset_mutex); -- cgit v1.2.3 From 79063bffc81f82689bd90e16da1b49408f3bf095 Mon Sep 17 00:00:00 2001 From: Zefan Li Date: Fri, 13 Feb 2015 11:20:30 +0800 Subject: cpuset: fix a warning when clearing configured masks in old hierarchy When we clear cpuset.cpus, cpuset.effective_cpus won't be cleared: # mount -t cgroup -o cpuset xxx /mnt # mkdir /mnt/tmp # echo 0 > /mnt/tmp/cpuset.cpus # echo > /mnt/tmp/cpuset.cpus # cat cpuset.cpus # cat cpuset.effective_cpus 0-15 And a kernel warning in update_cpumasks_hier() is triggered: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4028 at kernel/cpuset.c:894 update_cpumasks_hier+0x471/0x650() Cc: # 3.17+ Signed-off-by: Zefan Li Signed-off-by: Tejun Heo Tested-by: Serge Hallyn --- kernel/cpuset.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'kernel') diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 89d4ed08afba..407611ba371b 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -873,7 +873,7 @@ static void update_cpumasks_hier(struct cpuset *cs, struct cpumask *new_cpus) * If it becomes empty, inherit the effective mask of the * parent, which is guaranteed to have some CPUs. */ - if (cpumask_empty(new_cpus)) + if (cgroup_on_dfl(cp->css.cgroup) && cpumask_empty(new_cpus)) cpumask_copy(new_cpus, parent->effective_cpus); /* Skip the whole subtree if the cpumask remains the same. */ @@ -1129,7 +1129,7 @@ static void update_nodemasks_hier(struct cpuset *cs, nodemask_t *new_mems) * If it becomes empty, inherit the effective mask of the * parent, which is guaranteed to have some MEMs. */ - if (nodes_empty(*new_mems)) + if (cgroup_on_dfl(cp->css.cgroup) && nodes_empty(*new_mems)) *new_mems = parent->effective_mems; /* Skip the whole subtree if the nodemask remains the same. */ -- cgit v1.2.3 From 283cb41f426b723a0255702b761b0fc5d1b53a81 Mon Sep 17 00:00:00 2001 From: Jason Low Date: Fri, 13 Feb 2015 11:58:07 +0800 Subject: cpuset: Fix cpuset sched_relax_domain_level The cpuset.sched_relax_domain_level can control how far we do immediate load balancing on a system. However, it was found on recent kernels that echo'ing a value into cpuset.sched_relax_domain_level did not reduce any immediate load balancing. The reason this occurred was because the update_domain_attr_tree() traversal did not update for the "top_cpuset". This resulted in nothing being changed when modifying the sched_relax_domain_level parameter. This patch is able to address that problem by having update_domain_attr_tree() allow updates for the root in the cpuset traversal. Fixes: fc560a26acce ("cpuset: replace cpuset->stack_list with cpuset_for_each_descendant_pre()") Cc: # 3.9+ Signed-off-by: Jason Low Signed-off-by: Zefan Li Signed-off-by: Tejun Heo Tested-by: Serge Hallyn --- kernel/cpuset.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'kernel') diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 407611ba371b..fc7f4748d34a 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -548,9 +548,6 @@ static void update_domain_attr_tree(struct sched_domain_attr *dattr, rcu_read_lock(); cpuset_for_each_descendant_pre(cp, pos_css, root_cs) { - if (cp == root_cs) - continue; - /* skip the whole subtree if @cp doesn't have any CPU */ if (cpumask_empty(cp->cpus_allowed)) { pos_css = css_rightmost_descendant(pos_css); -- cgit v1.2.3 From 8603e1b30027f943cc9c1eef2b291d42c3347af1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 5 Mar 2015 08:04:13 -0500 Subject: workqueue: fix hang involving racing cancel[_delayed]_work_sync()'s for PREEMPT_NONE cancel[_delayed]_work_sync() are implemented using __cancel_work_timer() which grabs the PENDING bit using try_to_grab_pending() and then flushes the work item with PENDING set to prevent the on-going execution of the work item from requeueing itself. try_to_grab_pending() can always grab PENDING bit without blocking except when someone else is doing the above flushing during cancelation. In that case, try_to_grab_pending() returns -ENOENT. In this case, __cancel_work_timer() currently invokes flush_work(). The assumption is that the completion of the work item is what the other canceling task would be waiting for too and thus waiting for the same condition and retrying should allow forward progress without excessive busy looping Unfortunately, this doesn't work if preemption is disabled or the latter task has real time priority. Let's say task A just got woken up from flush_work() by the completion of the target work item. If, before task A starts executing, task B gets scheduled and invokes __cancel_work_timer() on the same work item, its try_to_grab_pending() will return -ENOENT as the work item is still being canceled by task A and flush_work() will also immediately return false as the work item is no longer executing. This puts task B in a busy loop possibly preventing task A from executing and clearing the canceling state on the work item leading to a hang. task A task B worker executing work __cancel_work_timer() try_to_grab_pending() set work CANCELING flush_work() block for work completion completion, wakes up A __cancel_work_timer() while (forever) { try_to_grab_pending() -ENOENT as work is being canceled flush_work() false as work is no longer executing } This patch removes the possible hang by updating __cancel_work_timer() to explicitly wait for clearing of CANCELING rather than invoking flush_work() after try_to_grab_pending() fails with -ENOENT. Link: http://lkml.kernel.org/g/20150206171156.GA8942@axis.com v3: bit_waitqueue() can't be used for work items defined in vmalloc area. Switched to custom wake function which matches the target work item and exclusive wait and wakeup. v2: v1 used wake_up() on bit_waitqueue() which leads to NULL deref if the target bit waitqueue has wait_bit_queue's on it. Use DEFINE_WAIT_BIT() and __wake_up_bit() instead. Reported by Tomeu Vizoso. Signed-off-by: Tejun Heo Reported-by: Rabin Vincent Cc: Tomeu Vizoso Cc: stable@vger.kernel.org Tested-by: Jesper Nilsson Tested-by: Rabin Vincent --- include/linux/workqueue.h | 3 ++- kernel/workqueue.c | 56 +++++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 54 insertions(+), 5 deletions(-) (limited to 'kernel') diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index 74db135f9957..f597846ff605 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -70,7 +70,8 @@ enum { /* data contains off-queue information when !WORK_STRUCT_PWQ */ WORK_OFFQ_FLAG_BASE = WORK_STRUCT_COLOR_SHIFT, - WORK_OFFQ_CANCELING = (1 << WORK_OFFQ_FLAG_BASE), + __WORK_OFFQ_CANCELING = WORK_OFFQ_FLAG_BASE, + WORK_OFFQ_CANCELING = (1 << __WORK_OFFQ_CANCELING), /* * When a work item is off queue, its high bits point to the last diff --git a/kernel/workqueue.c b/kernel/workqueue.c index f28849394791..41ff75b478c6 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -2728,19 +2728,57 @@ bool flush_work(struct work_struct *work) } EXPORT_SYMBOL_GPL(flush_work); +struct cwt_wait { + wait_queue_t wait; + struct work_struct *work; +}; + +static int cwt_wakefn(wait_queue_t *wait, unsigned mode, int sync, void *key) +{ + struct cwt_wait *cwait = container_of(wait, struct cwt_wait, wait); + + if (cwait->work != key) + return 0; + return autoremove_wake_function(wait, mode, sync, key); +} + static bool __cancel_work_timer(struct work_struct *work, bool is_dwork) { + static DECLARE_WAIT_QUEUE_HEAD(cancel_waitq); unsigned long flags; int ret; do { ret = try_to_grab_pending(work, is_dwork, &flags); /* - * If someone else is canceling, wait for the same event it - * would be waiting for before retrying. + * If someone else is already canceling, wait for it to + * finish. flush_work() doesn't work for PREEMPT_NONE + * because we may get scheduled between @work's completion + * and the other canceling task resuming and clearing + * CANCELING - flush_work() will return false immediately + * as @work is no longer busy, try_to_grab_pending() will + * return -ENOENT as @work is still being canceled and the + * other canceling task won't be able to clear CANCELING as + * we're hogging the CPU. + * + * Let's wait for completion using a waitqueue. As this + * may lead to the thundering herd problem, use a custom + * wake function which matches @work along with exclusive + * wait and wakeup. */ - if (unlikely(ret == -ENOENT)) - flush_work(work); + if (unlikely(ret == -ENOENT)) { + struct cwt_wait cwait; + + init_wait(&cwait.wait); + cwait.wait.func = cwt_wakefn; + cwait.work = work; + + prepare_to_wait_exclusive(&cancel_waitq, &cwait.wait, + TASK_UNINTERRUPTIBLE); + if (work_is_canceling(work)) + schedule(); + finish_wait(&cancel_waitq, &cwait.wait); + } } while (unlikely(ret < 0)); /* tell other tasks trying to grab @work to back off */ @@ -2749,6 +2787,16 @@ static bool __cancel_work_timer(struct work_struct *work, bool is_dwork) flush_work(work); clear_work_data(work); + + /* + * Paired with prepare_to_wait() above so that either + * waitqueue_active() is visible here or !work_is_canceling() is + * visible there. + */ + smp_mb(); + if (waitqueue_active(&cancel_waitq)) + __wake_up(&cancel_waitq, TASK_NORMAL, 1, work); + return ret; } -- cgit v1.2.3 From b24d443b8f17d9776f5fc1f6c780a0a21eb02913 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Wed, 4 Mar 2015 23:10:28 -0500 Subject: ftrace: Clear REGS_EN and TRAMP_EN flags on disabling record via sysctl When /proc/sys/kernel/ftrace_enabled is set to zero, all function tracing is disabled. But the records that represent the functions still hold information about the ftrace_ops that are hooked to them. ftrace_ops may request "REGS" (have a full set of pt_regs passed to the callback), or "TRAMP" (the ops has its own trampoline to use). When the record is updated to represent the state of the ops hooked to it, it sets "REGS_EN" and/or "TRAMP_EN" to state that the callback points to the correct trampoline (REGS has its own trampoline). When ftrace_enabled is set to zero, all ftrace locations are a nop, so they do not point to any trampoline. But the _EN flags are still set. This can cause the accounting to go wrong when ftrace_enabled is cleared and an ops that has a trampoline is registered or unregistered. For example, the following will cause ftrace to crash: # echo function_graph > /sys/kernel/debug/tracing/current_tracer # echo 0 > /proc/sys/kernel/ftrace_enabled # echo nop > /sys/kernel/debug/tracing/current_tracer # echo 1 > /proc/sys/kernel/ftrace_enabled # echo function_graph > /sys/kernel/debug/tracing/current_tracer As function_graph uses a trampoline, when ftrace_enabled is set to zero the updates to the record are not done. When enabling function_graph again, the record will still have the TRAMP_EN flag set, and it will look for an op that has a trampoline other than the function_graph ops, and fail to find one. Cc: stable@vger.kernel.org # 3.17+ Reported-by: Pratyush Anand Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'kernel') diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 45e5cb143d17..14947e014b78 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -2041,8 +2041,12 @@ static int ftrace_check_record(struct dyn_ftrace *rec, int enable, int update) if (!ftrace_rec_count(rec)) rec->flags = 0; else - /* Just disable the record (keep REGS state) */ - rec->flags &= ~FTRACE_FL_ENABLED; + /* + * Just disable the record, but keep the ops TRAMP + * and REGS states. The _EN flags must be disabled though. + */ + rec->flags &= ~(FTRACE_FL_ENABLED | FTRACE_FL_TRAMP_EN | + FTRACE_FL_REGS_EN); } return FTRACE_UPDATE_MAKE_NOP; -- cgit v1.2.3 From 1619dc3f8f555ee1cdd3c75db3885d5715442b12 Mon Sep 17 00:00:00 2001 From: Pratyush Anand Date: Fri, 6 Mar 2015 23:58:06 +0530 Subject: ftrace: Fix en(dis)able graph caller when en(dis)abling record via sysctl When ftrace is enabled globally through the proc interface, we must check if ftrace_graph_active is set. If it is set, then we should also pass the FTRACE_START_FUNC_RET command to ftrace_run_update_code(). Similarly, when ftrace is disabled globally through the proc interface, we must check if ftrace_graph_active is set. If it is set, then we should also pass the FTRACE_STOP_FUNC_RET command to ftrace_run_update_code(). Consider the following situation. # echo 0 > /proc/sys/kernel/ftrace_enabled After this ftrace_enabled = 0. # echo function_graph > /sys/kernel/debug/tracing/current_tracer Since ftrace_enabled = 0, ftrace_enable_ftrace_graph_caller() is never called. # echo 1 > /proc/sys/kernel/ftrace_enabled Now ftrace_enabled will be set to true, but still ftrace_enable_ftrace_graph_caller() will not be called, which is not desired. Further if we execute the following after this: # echo nop > /sys/kernel/debug/tracing/current_tracer Now since ftrace_enabled is set it will call ftrace_disable_ftrace_graph_caller(), which causes a kernel warning on the ARM platform. On the ARM platform, when ftrace_enable_ftrace_graph_caller() is called, it checks whether the old instruction is a nop or not. If it's not a nop, then it returns an error. If it is a nop then it replaces instruction at that address with a branch to ftrace_graph_caller. ftrace_disable_ftrace_graph_caller() behaves just the opposite. Therefore, if generic ftrace code ever calls either ftrace_enable_ftrace_graph_caller() or ftrace_disable_ftrace_graph_caller() consecutively two times in a row, then it will return an error, which will cause the generic ftrace code to raise a warning. Note, x86 does not have an issue with this because the architecture specific code for ftrace_enable_ftrace_graph_caller() and ftrace_disable_ftrace_graph_caller() does not check the previous state, and calling either of these functions twice in a row has no ill effect. Link: http://lkml.kernel.org/r/e4fbe64cdac0dd0e86a3bf914b0f83c0b419f146.1425666454.git.panand@redhat.com Cc: stable@vger.kernel.org # 2.6.31+ Signed-off-by: Pratyush Anand [ removed extra if (ftrace_start_up) and defined ftrace_graph_active as 0 if CONFIG_FUNCTION_GRAPH_TRACER is not set. ] Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) (limited to 'kernel') diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 14947e014b78..ea520bb54d44 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -1059,6 +1059,12 @@ static __init void ftrace_profile_debugfs(struct dentry *d_tracer) static struct pid * const ftrace_swapper_pid = &init_struct_pid; +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +static int ftrace_graph_active; +#else +# define ftrace_graph_active 0 +#endif + #ifdef CONFIG_DYNAMIC_FTRACE static struct ftrace_ops *removed_ops; @@ -2692,24 +2698,36 @@ static int ftrace_shutdown(struct ftrace_ops *ops, int command) static void ftrace_startup_sysctl(void) { + int command; + if (unlikely(ftrace_disabled)) return; /* Force update next time */ saved_ftrace_func = NULL; /* ftrace_start_up is true if we want ftrace running */ - if (ftrace_start_up) - ftrace_run_update_code(FTRACE_UPDATE_CALLS); + if (ftrace_start_up) { + command = FTRACE_UPDATE_CALLS; + if (ftrace_graph_active) + command |= FTRACE_START_FUNC_RET; + ftrace_run_update_code(command); + } } static void ftrace_shutdown_sysctl(void) { + int command; + if (unlikely(ftrace_disabled)) return; /* ftrace_start_up is true if ftrace is running */ - if (ftrace_start_up) - ftrace_run_update_code(FTRACE_DISABLE_CALLS); + if (ftrace_start_up) { + command = FTRACE_DISABLE_CALLS; + if (ftrace_graph_active) + command |= FTRACE_STOP_FUNC_RET; + ftrace_run_update_code(command); + } } static cycle_t ftrace_update_time; @@ -5594,8 +5612,6 @@ static struct ftrace_ops graph_ops = { ASSIGN_OPS_HASH(graph_ops, &global_ops.local_hash) }; -static int ftrace_graph_active; - int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace) { return 0; -- cgit v1.2.3 From 524a38682573b2e15ab6317ccfe50280441514be Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Fri, 6 Mar 2015 19:55:13 -0500 Subject: ftrace: Fix ftrace enable ordering of sysctl ftrace_enabled Some archs (specifically PowerPC), are sensitive with the ordering of the enabling of the calls to function tracing and setting of the function to use to be traced. That is, update_ftrace_function() sets what function the ftrace_caller trampoline should call. Some archs require this to be set before calling ftrace_run_update_code(). Another bug was discovered, that ftrace_startup_sysctl() called ftrace_run_update_code() directly. If the function the ftrace_caller trampoline changes, then it will not be updated. Instead a call to ftrace_startup_enable() should be called because it tests to see if the callback changed since the code was disabled, and will tell the arch to update appropriately. Most archs do not need this notification, but PowerPC does. The problem could be seen by the following commands: # echo 0 > /proc/sys/kernel/ftrace_enabled # echo function > /sys/kernel/debug/tracing/current_tracer # echo 1 > /proc/sys/kernel/ftrace_enabled # cat /sys/kernel/debug/tracing/trace The trace will show that function tracing was not active. Cc: stable@vger.kernel.org # 2.6.27+ Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'kernel') diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index ea520bb54d44..4f228024055b 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -2710,7 +2710,7 @@ static void ftrace_startup_sysctl(void) command = FTRACE_UPDATE_CALLS; if (ftrace_graph_active) command |= FTRACE_START_FUNC_RET; - ftrace_run_update_code(command); + ftrace_startup_enable(command); } } @@ -5580,12 +5580,12 @@ ftrace_enable_sysctl(struct ctl_table *table, int write, if (ftrace_enabled) { - ftrace_startup_sysctl(); - /* we are starting ftrace again */ if (ftrace_ops_list != &ftrace_list_end) update_ftrace_function(); + ftrace_startup_sysctl(); + } else { /* stopping ftrace calls (just send to ftrace_stub) */ ftrace_trace_function = ftrace_stub; -- cgit v1.2.3 From a5af5aa8b67dfdba36c853b70564fd2dfe73d478 Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Thu, 12 Mar 2015 16:26:11 -0700 Subject: kasan, module, vmalloc: rework shadow allocation for modules Current approach in handling shadow memory for modules is broken. Shadow memory could be freed only after memory shadow corresponds it is no longer used. vfree() called from interrupt context could use memory its freeing to store 'struct llist_node' in it: void vfree(const void *addr) { ... if (unlikely(in_interrupt())) { struct vfree_deferred *p = this_cpu_ptr(&vfree_deferred); if (llist_add((struct llist_node *)addr, &p->list)) schedule_work(&p->wq); Later this list node used in free_work() which actually frees memory. Currently module_memfree() called in interrupt context will free shadow before freeing module's memory which could provoke kernel crash. So shadow memory should be freed after module's memory. However, such deallocation order could race with kasan_module_alloc() in module_alloc(). Free shadow right before releasing vm area. At this point vfree()'d memory is not used anymore and yet not available for other allocations. New VM_KASAN flag used to indicate that vm area has dynamically allocated shadow memory so kasan frees shadow only if it was previously allocated. Signed-off-by: Andrey Ryabinin Acked-by: Rusty Russell Cc: Dmitry Vyukov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kasan.h | 5 +++-- include/linux/vmalloc.h | 1 + kernel/module.c | 2 -- mm/kasan/kasan.c | 14 +++++++++++--- mm/vmalloc.c | 1 + 5 files changed, 16 insertions(+), 7 deletions(-) (limited to 'kernel') diff --git a/include/linux/kasan.h b/include/linux/kasan.h index 72ba725ddf9c..5fa48a21d73e 100644 --- a/include/linux/kasan.h +++ b/include/linux/kasan.h @@ -5,6 +5,7 @@ struct kmem_cache; struct page; +struct vm_struct; #ifdef CONFIG_KASAN @@ -52,7 +53,7 @@ void kasan_slab_free(struct kmem_cache *s, void *object); #define MODULE_ALIGN (PAGE_SIZE << KASAN_SHADOW_SCALE_SHIFT) int kasan_module_alloc(void *addr, size_t size); -void kasan_module_free(void *addr); +void kasan_free_shadow(const struct vm_struct *vm); #else /* CONFIG_KASAN */ @@ -82,7 +83,7 @@ static inline void kasan_slab_alloc(struct kmem_cache *s, void *object) {} static inline void kasan_slab_free(struct kmem_cache *s, void *object) {} static inline int kasan_module_alloc(void *addr, size_t size) { return 0; } -static inline void kasan_module_free(void *addr) {} +static inline void kasan_free_shadow(const struct vm_struct *vm) {} #endif /* CONFIG_KASAN */ diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 7d7acb35603d..0ec598381f97 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -17,6 +17,7 @@ struct vm_area_struct; /* vma defining user mapping in mm_types.h */ #define VM_VPAGES 0x00000010 /* buffer for pages was vmalloc'ed */ #define VM_UNINITIALIZED 0x00000020 /* vm_struct is not fully initialized */ #define VM_NO_GUARD 0x00000040 /* don't add guard page */ +#define VM_KASAN 0x00000080 /* has allocated kasan shadow memory */ /* bits [20..32] reserved for arch specific ioremap internals */ /* diff --git a/kernel/module.c b/kernel/module.c index cc93cf68653c..b3d634ed06c9 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -56,7 +56,6 @@ #include #include #include -#include #include #include #include @@ -1814,7 +1813,6 @@ static void unset_module_init_ro_nx(struct module *mod) { } void __weak module_memfree(void *module_region) { vfree(module_region); - kasan_module_free(module_region); } void __weak module_arch_cleanup(struct module *mod) diff --git a/mm/kasan/kasan.c b/mm/kasan/kasan.c index 78fee632a7ee..936d81661c47 100644 --- a/mm/kasan/kasan.c +++ b/mm/kasan/kasan.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include "kasan.h" @@ -414,12 +415,19 @@ int kasan_module_alloc(void *addr, size_t size) GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL, VM_NO_GUARD, NUMA_NO_NODE, __builtin_return_address(0)); - return ret ? 0 : -ENOMEM; + + if (ret) { + find_vm_area(addr)->flags |= VM_KASAN; + return 0; + } + + return -ENOMEM; } -void kasan_module_free(void *addr) +void kasan_free_shadow(const struct vm_struct *vm) { - vfree(kasan_mem_to_shadow(addr)); + if (vm->flags & VM_KASAN) + vfree(kasan_mem_to_shadow(vm->addr)); } static void register_global(struct kasan_global *global) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 35b25e1340ca..49abccf29a29 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -1418,6 +1418,7 @@ struct vm_struct *remove_vm_area(const void *addr) spin_unlock(&vmap_area_lock); vmap_debug_free_range(va->va_start, va->va_end); + kasan_free_shadow(vm); free_unmap_vmap_area(va); vm->size -= PAGE_SIZE; -- cgit v1.2.3 From d415a7f1c1a8406b22d95b943c66a5b73a37bc19 Mon Sep 17 00:00:00 2001 From: Leon Yu Date: Thu, 26 Feb 2015 20:43:33 +0800 Subject: perf: Fix context leak in put_event() Commit: a83fe28e2e45 ("perf: Fix put_event() ctx lock") changed the locking logic in put_event() by replacing mutex_lock_nested() with perf_event_ctx_lock_nested(), but didn't fix the subsequent mutex_unlock() with a correct counterpart, perf_event_ctx_unlock(). Contexts are thus leaked as a result of incremented refcount in perf_event_ctx_lock_nested(). Signed-off-by: Leon Yu Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras Cc: Peter Zijlstra Fixes: a83fe28e2e45 ("perf: Fix put_event() ctx lock") Link: http://lkml.kernel.org/r/1424954613-5034-1-git-send-email-chianglungyu@gmail.com Signed-off-by: Ingo Molnar --- kernel/events/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'kernel') diff --git a/kernel/events/core.c b/kernel/events/core.c index f04daabfd1cf..453ef61311d4 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -3591,7 +3591,7 @@ static void put_event(struct perf_event *event) ctx = perf_event_ctx_lock_nested(event, SINGLE_DEPTH_NESTING); WARN_ON_ONCE(ctx->parent_ctx); perf_remove_from_context(event, true); - mutex_unlock(&ctx->mutex); + perf_event_ctx_unlock(event, ctx); _free_event(event); } -- cgit v1.2.3 From 8cb2c2dc472775479a1a7e78180955f6f1cb0b0a Mon Sep 17 00:00:00 2001 From: Petr Mladek Date: Thu, 12 Mar 2015 12:55:13 +0100 Subject: livepatch: Fix subtle race with coming and going modules There is a notifier that handles live patches for coming and going modules. It takes klp_mutex lock to avoid races with coming and going patches but it does not keep the lock all the time. Therefore the following races are possible: 1. The notifier is called sometime in STATE_MODULE_COMING. The module is visible by find_module() in this state all the time. It means that new patch can be registered and enabled even before the notifier is called. It might create wrong order of stacked patches, see below for an example. 2. New patch could still see the module in the GOING state even after the notifier has been called. It will try to initialize the related object structures but the module could disappear at any time. There will stay mess in the structures. It might even cause an invalid memory access. This patch solves the problem by adding a boolean variable into struct module. The value is true after the coming and before the going handler is called. New patches need to be applied when the value is true and they need to ignore the module when the value is false. Note that we need to know state of all modules on the system. The races are related to new patches. Therefore we do not know what modules will get patched. Also note that we could not simply ignore going modules. The code from the module could be called even in the GOING state until mod->exit() finishes. If we start supporting patches with semantic changes between function calls, we need to apply new patches to any still usable code. See below for an example. Finally note that the patch solves only the situation when a new patch is registered. There are no such problems when the patch is being removed. It does not matter who disable the patch first, whether the normal disable_patch() or the module notifier. There is nothing to do once the patch is disabled. Alternative solutions: ====================== + reject new patches when a patched module is coming or going; this is ugly + wait with adding new patch until the module leaves the COMING and GOING states; this might be dangerous and complicated; we would need to release kgr_lock in the middle of the patch registration to avoid a deadlock with the coming and going handlers; also we might need a waitqueue for each module which seems to be even bigger overhead than the boolean + stop modules from entering COMING and GOING states; wait until modules leave these states when they are already there; looks complicated; we would need to ignore the module that asked to stop the others to avoid a deadlock; also it is unclear what to do when two modules asked to stop others and both are in COMING state (situation when two new patches are applied) + always register/enable new patches and fix up the potential mess (registered patches order) in klp_module_init(); this is nasty and prone to regressions in the future development + add another MODULE_STATE where the kallsyms are visible but the module is not used yet; this looks too complex; the module states are checked on "many" locations Example of patch stacking breakage: =================================== The notifier could _not_ _simply_ ignore already initialized module objects. For example, let's have three patches (P1, P2, P3) for functions a() and b() where a() is from vmcore and b() is from a module M. Something like: a() b() P1 a1() b1() P2 a2() b2() P3 a3() b3(3) If you load the module M after all patches are registered and enabled. The ftrace ops for function a() and b() has listed the functions in this order: ops_a->func_stack -> list(a3,a2,a1) ops_b->func_stack -> list(b3,b2,b1) , so the pointer to b3() is the first and will be used. Then you might have the following scenario. Let's start with state when patches P1 and P2 are registered and enabled but the module M is not loaded. Then ftrace ops for b() does not exist. Then we get into the following race: CPU0 CPU1 load_module(M) complete_formation() mod->state = MODULE_STATE_COMING; mutex_unlock(&module_mutex); klp_register_patch(P3); klp_enable_patch(P3); # STATE 1 klp_module_notify(M) klp_module_notify_coming(P1); klp_module_notify_coming(P2); klp_module_notify_coming(P3); # STATE 2 The ftrace ops for a() and b() then looks: STATE1: ops_a->func_stack -> list(a3,a2,a1); ops_b->func_stack -> list(b3); STATE2: ops_a->func_stack -> list(a3,a2,a1); ops_b->func_stack -> list(b2,b1,b3); therefore, b2() is used for the module but a3() is used for vmcore because they were the last added. Example of the race with going modules: ======================================= CPU0 CPU1 delete_module() #SYSCALL try_stop_module() mod->state = MODULE_STATE_GOING; mutex_unlock(&module_mutex); klp_register_patch() klp_enable_patch() #save place to switch universe b() # from module that is going a() # from core (patched) mod->exit(); Note that the function b() can be called until we call mod->exit(). If we do not apply patch against b() because it is in MODULE_STATE_GOING, it will call patched a() with modified semantic and things might get wrong. [jpoimboe@redhat.com: use one boolean instead of two] Signed-off-by: Petr Mladek Acked-by: Josh Poimboeuf Acked-by: Rusty Russell Signed-off-by: Jiri Kosina --- include/linux/module.h | 4 ++++ kernel/livepatch/core.c | 30 ++++++++++++++++++++++++++---- 2 files changed, 30 insertions(+), 4 deletions(-) (limited to 'kernel') diff --git a/include/linux/module.h b/include/linux/module.h index b653d7c0a05a..7232fde6a991 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -344,6 +344,10 @@ struct module { unsigned long *ftrace_callsites; #endif +#ifdef CONFIG_LIVEPATCH + bool klp_alive; +#endif + #ifdef CONFIG_MODULE_UNLOAD /* What modules depend on me? */ struct list_head source_list; diff --git a/kernel/livepatch/core.c b/kernel/livepatch/core.c index 01ca08804f51..3f9f1d6b4c2e 100644 --- a/kernel/livepatch/core.c +++ b/kernel/livepatch/core.c @@ -89,16 +89,28 @@ static bool klp_is_object_loaded(struct klp_object *obj) /* sets obj->mod if object is not vmlinux and module is found */ static void klp_find_object_module(struct klp_object *obj) { + struct module *mod; + if (!klp_is_module(obj)) return; mutex_lock(&module_mutex); /* - * We don't need to take a reference on the module here because we have - * the klp_mutex, which is also taken by the module notifier. This - * prevents any module from unloading until we release the klp_mutex. + * We do not want to block removal of patched modules and therefore + * we do not take a reference here. The patches are removed by + * a going module handler instead. + */ + mod = find_module(obj->name); + /* + * Do not mess work of the module coming and going notifiers. + * Note that the patch might still be needed before the going handler + * is called. Module functions can be called even in the GOING state + * until mod->exit() finishes. This is especially important for + * patches that modify semantic of the functions. */ - obj->mod = find_module(obj->name); + if (mod && mod->klp_alive) + obj->mod = mod; + mutex_unlock(&module_mutex); } @@ -767,6 +779,7 @@ static int klp_init_object(struct klp_patch *patch, struct klp_object *obj) return -EINVAL; obj->state = KLP_DISABLED; + obj->mod = NULL; klp_find_object_module(obj); @@ -961,6 +974,15 @@ static int klp_module_notify(struct notifier_block *nb, unsigned long action, mutex_lock(&klp_mutex); + /* + * Each module has to know that the notifier has been called. + * We never know what module will get patched by a new patch. + */ + if (action == MODULE_STATE_COMING) + mod->klp_alive = true; + else /* MODULE_STATE_GOING */ + mod->klp_alive = false; + list_for_each_entry(patch, &klp_patches, list) { for (obj = patch->objs; obj->funcs; obj++) { if (!klp_is_module(obj) || strcmp(obj->name, mod->name)) -- cgit v1.2.3