From 90b44f8ffdf6c66d190ee71b330009bf7f11a208 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Mon, 25 Jul 2011 19:57:52 +0530 Subject: dmaengine: add helper function for slave_single For clients which require a single slave transfer and dont want to be bothered about the scatterlist api, this helper gives simple API for this transfer and creates single scatterlist for DMA API Idea from Russell King Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 8fbf40e0713c..0d738c95fe4e 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -24,6 +24,7 @@ #include #include #include +#include struct scatterlist; @@ -519,6 +520,16 @@ static inline int dmaengine_slave_config(struct dma_chan *chan, (unsigned long)config); } +static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single( + struct dma_chan *chan, void *buf, size_t len, + enum dma_data_direction dir, unsigned long flags) +{ + struct scatterlist sg; + sg_init_one(&sg, buf, len); + + return chan->device->device_prep_slave_sg(chan, &sg, 1, dir, flags); +} + static inline int dmaengine_terminate_all(struct dma_chan *chan) { return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0); -- cgit v1.2.3 From a16e470caa173d323ef68dcac98c899b95fa4f84 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 9 Aug 2011 10:08:10 +0530 Subject: dmaengine: remove struct scatterlist for header Commit 90b44f8 introduces dmaengine_prep_slave_single API which adds scatterlist.h in dmaengine.h, so defining struct scatterlist is not required Signed-off-by: Vinod Koul Acked-by: Dan Williams --- include/linux/dmaengine.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 0d738c95fe4e..ace51af4369f 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -26,8 +26,6 @@ #include #include -struct scatterlist; - /** * typedef dma_cookie_t - an opaque DMA cookie * -- cgit v1.2.3 From 5a61233073a35a7ae152af77ed80dfc465c38fc7 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:30 +0530 Subject: dmaengine/amba-pl08x: Complete doc comment for struct pl08x_txd Doc comment for struct pl08x_txd was incomplete. Complete that. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- include/linux/amba/pl08x.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index e6e28f37d8ec..cd8f629da58f 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -105,8 +105,16 @@ struct pl08x_phy_chan { /** * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor + * @tx: async tx descriptor + * @node: node for txd list for channels + * @src_addr: src address of txd + * @dst_addr: dst address of txd + * @len: transfer len in bytes + * @direction: direction of transfer * @llis_bus: DMA memory address (physical) start for the LLIs * @llis_va: virtual memory address start for the LLIs + * @cctl: control reg values for current txd + * @ccfg: config reg values for current txd */ struct pl08x_txd { struct dma_async_tx_descriptor tx; -- cgit v1.2.3 From 16a2e7d359b9fc64fb8a6717c0642691b1e60bb7 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:37 +0530 Subject: dmaengine/amba-pl08x: Get rid of pl08x_pre_boundary() Pl080 Manual says: "Bursts do not cross the 1KB address boundary" We can program the controller to cross 1 KB boundary on a burst and controller can take care of this boundary condition by itself. Following is the discussion with ARM Technical Support Guys (David): [Viresh] Manual says: "Bursts do not cross the 1KB address boundary" What does that actually mean? As, Maximum size transferable with a single LLI is 4095 * 4 =16380 ~ 16KB. So, if we don't have src/dest address aligned to burst size, we can't use this big of an LLI. [David] There is a difference between bursts describing the total data transferred by the DMA controller and AHB bursts. Bursts described by the programmable parameters in the PL080 have no direct connection with the bursts that are seen on the AHB bus. The statement that "Bursts do not cross the 1KB address boundary" in the TRM is referring to AHB bursts, where this limitation is a requirement of the AHB spec. You can still issue bursts within the PL080 that are in excess of 1KB. The PL080 will make sure that its bursts are broken down into legal AHB bursts which will be formatted to ensure that no AHB burst crosses a 1KB boundary. Based on above discussion, this patch removes all code related to 1 KB boundary as we are not required to handle this in driver. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 141 ++++++--------------------------------------- include/linux/amba/pl08x.h | 2 - 2 files changed, 17 insertions(+), 126 deletions(-) (limited to 'include') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 6bba32e5ddb8..be9a1c718f9a 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -149,14 +149,6 @@ struct pl08x_driver_data { * PL08X specific defines */ -/* - * Memory boundaries: the manual for PL08x says that the controller - * cannot read past a 1KiB boundary, so these defines are used to - * create transfer LLIs that do not cross such boundaries. - */ -#define PL08X_BOUNDARY_SHIFT (10) /* 1KB 0x400 */ -#define PL08X_BOUNDARY_SIZE (1 << PL08X_BOUNDARY_SHIFT) - /* Size (bytes) of each LLI buffer allocated for one transfer */ # define PL08X_LLI_TSFR_SIZE 0x2000 @@ -567,18 +559,6 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, bd->remainder -= len; } -/* - * Return number of bytes to fill to boundary, or len. - * This calculation works for any value of addr. - */ -static inline size_t pl08x_pre_boundary(u32 addr, size_t len) -{ - size_t boundary_len = PL08X_BOUNDARY_SIZE - - (addr & (PL08X_BOUNDARY_SIZE - 1)); - - return min(boundary_len, len); -} - /* * This fills in the table of LLIs for the transfer descriptor * Note that we assume we never have to change the burst sizes @@ -685,118 +665,30 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * width left */ while (bd.remainder > (mbus->buswidth - 1)) { - size_t lli_len, target_len, tsize, odd_bytes; + size_t lli_len, tsize; /* * If enough left try to send max possible, * otherwise try to send the remainder */ - target_len = min(bd.remainder, max_bytes_per_lli); - + lli_len = min(bd.remainder, max_bytes_per_lli); /* - * Set bus lengths for incrementing buses to the - * number of bytes which fill to next memory boundary, - * limiting on the target length calculated above. + * Check against minimum bus alignment: Calculate actual + * transfer size in relation to bus width and get a + * maximum remainder of the smallest bus width - 1 */ - if (cctl & PL080_CONTROL_SRC_INCR) - bd.srcbus.fill_bytes = - pl08x_pre_boundary(bd.srcbus.addr, - target_len); - else - bd.srcbus.fill_bytes = target_len; - - if (cctl & PL080_CONTROL_DST_INCR) - bd.dstbus.fill_bytes = - pl08x_pre_boundary(bd.dstbus.addr, - target_len); - else - bd.dstbus.fill_bytes = target_len; - - /* Find the nearest */ - lli_len = min(bd.srcbus.fill_bytes, - bd.dstbus.fill_bytes); - - BUG_ON(lli_len > bd.remainder); - - if (lli_len <= 0) { - dev_err(&pl08x->adev->dev, - "%s lli_len is %zu, <= 0\n", - __func__, lli_len); - return 0; - } - - if (lli_len == target_len) { - /* - * Can send what we wanted. - * Maintain alignment - */ - lli_len = (lli_len/mbus->buswidth) * - mbus->buswidth; - odd_bytes = 0; - } else { - /* - * So now we know how many bytes to transfer - * to get to the nearest boundary. The next - * LLI will past the boundary. However, we - * may be working to a boundary on the slave - * bus. We need to ensure the master stays - * aligned, and that we are working in - * multiples of the bus widths. - */ - odd_bytes = lli_len % mbus->buswidth; - lli_len -= odd_bytes; - - } - - if (lli_len) { - /* - * Check against minimum bus alignment: - * Calculate actual transfer size in relation - * to bus width an get a maximum remainder of - * the smallest bus width - 1 - */ - /* FIXME: use round_down()? */ - tsize = lli_len / min(mbus->buswidth, - sbus->buswidth); - lli_len = tsize * min(mbus->buswidth, - sbus->buswidth); - - if (target_len != lli_len) { - dev_vdbg(&pl08x->adev->dev, - "%s can't send what we want. Desired 0x%08zx, lli of 0x%08zx bytes in txd of 0x%08zx\n", - __func__, target_len, lli_len, txd->len); - } - - cctl = pl08x_cctl_bits(cctl, - bd.srcbus.buswidth, - bd.dstbus.buswidth, - tsize); - - dev_vdbg(&pl08x->adev->dev, - "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n", - __func__, lli_len, bd.remainder); - pl08x_fill_lli_for_desc(&bd, num_llis++, - lli_len, cctl); - total_bytes += lli_len; - } + tsize = lli_len / min(mbus->buswidth, sbus->buswidth); + lli_len = tsize * min(mbus->buswidth, sbus->buswidth); - if (odd_bytes) { - /* - * Creep past the boundary, maintaining - * master alignment - */ - int j; - for (j = 0; (j < mbus->buswidth) - && (bd.remainder); j++) { - cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, single byte (remain 0x%08zx)\n", - __func__, bd.remainder); - pl08x_fill_lli_for_desc(&bd, - num_llis++, 1, cctl); - total_bytes++; - } - } + dev_vdbg(&pl08x->adev->dev, + "%s fill lli with single lli chunk of " + "size 0x%08zx (remainder 0x%08zx)\n", + __func__, lli_len, bd.remainder); + + cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, + bd.dstbus.buswidth, tsize); + pl08x_fill_lli_for_desc(&bd, num_llis++, lli_len, cctl); + total_bytes += lli_len; } /* @@ -811,6 +703,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, total_bytes++; } } + if (total_bytes != txd->len) { dev_err(&pl08x->adev->dev, "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n", diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index cd8f629da58f..ecd17f581e71 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -77,13 +77,11 @@ struct pl08x_channel_data { * @addr: current address * @maxwidth: the maximum width of a transfer on this bus * @buswidth: the width of this bus in bytes: 1, 2 or 4 - * @fill_bytes: bytes required to fill to the next bus memory boundary */ struct pl08x_bus_data { dma_addr_t addr; u8 maxwidth; u8 buswidth; - size_t fill_bytes; }; /** -- cgit v1.2.3 From 0a2356572b1910cc977f4ccf3c9ee1ecab08327a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:42 +0530 Subject: dmaengine/amba-pl08x: Pass flow controller information with slave channel data At least, on SPEAr platforms there is one peripheral, JPEG, which can be flow controller for DMA transfer. Currently DMA controller driver didn't support peripheral flow controller configurations. This patch adds device_fc field in struct pl08x_channel_data, which will be used only for slave transfers and is not used in case of mem2mem transfers. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 61 ++++++++++++++++++++++++++++++++++++++++------ include/linux/amba/pl08x.h | 4 +++ 2 files changed, 57 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index f70aa574c58f..a59c3c47286c 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -66,11 +66,6 @@ * after the final transfer signalled by LBREQ or LSREQ. The DMAC * will then move to the next LLI entry. * - * Only the former works sanely with scatter lists, so we only implement - * the DMAC flow control method. However, peripherals which use the LBREQ - * and LSREQ signals (eg, MMCI) are unable to use this mode, which through - * these hardware restrictions prevents them from using scatter DMA. - * * Global TODO: * - Break out common code from arch/arm/mach-s3c64xx and share */ @@ -617,6 +612,49 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, mbus == &bd.srcbus ? "src" : "dst", sbus == &bd.srcbus ? "src" : "dst"); + /* + * Zero length is only allowed if all these requirements are met: + * - flow controller is peripheral. + * - src.addr is aligned to src.width + * - dst.addr is aligned to dst.width + * + * sg_len == 1 should be true, as there can be two cases here: + * - Memory addresses are contiguous and are not scattered. Here, Only + * one sg will be passed by user driver, with memory address and zero + * length. We pass this to controller and after the transfer it will + * receive the last burst request from peripheral and so transfer + * finishes. + * + * - Memory addresses are scattered and are not contiguous. Here, + * Obviously as DMA controller doesn't know when a lli's transfer gets + * over, it can't load next lli. So in this case, there has to be an + * assumption that only one lli is supported. Thus, we can't have + * scattered addresses. + */ + if (!bd.remainder) { + u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >> + PL080_CONFIG_FLOW_CONTROL_SHIFT; + if (!((fc >= PL080_FLOW_SRC2DST_DST) && + (fc <= PL080_FLOW_SRC2DST_SRC))) { + dev_err(&pl08x->adev->dev, "%s sg len can't be zero", + __func__); + return 0; + } + + if ((bd.srcbus.addr % bd.srcbus.buswidth) || + (bd.srcbus.addr % bd.srcbus.buswidth)) { + dev_err(&pl08x->adev->dev, + "%s src & dst address must be aligned to src" + " & dst width if peripheral is flow controller", + __func__); + return 0; + } + + cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, + bd.dstbus.buswidth, 0); + pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl); + } + /* * Send byte by byte for following cases * - Less than a bus width available @@ -1250,7 +1288,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; - int ret; + int ret, tmp; /* * Current implementation ASSUMES only one sg @@ -1284,12 +1322,10 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( txd->len = sgl->length; if (direction == DMA_TO_DEVICE) { - txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl = plchan->dst_cctl; txd->src_addr = sgl->dma_address; txd->dst_addr = plchan->dst_addr; } else if (direction == DMA_FROM_DEVICE) { - txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl = plchan->src_cctl; txd->src_addr = plchan->src_addr; txd->dst_addr = sgl->dma_address; @@ -1299,6 +1335,15 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } + if (plchan->cd->device_fc) + tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER_PER : + PL080_FLOW_PER2MEM_PER; + else + tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER : + PL080_FLOW_PER2MEM; + + txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT; + ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index ecd17f581e71..a22662c93981 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -47,6 +47,9 @@ enum { * @muxval: a number usually used to poke into some mux regiser to * mux in the signal to this channel * @cctl_opt: default options for the channel control register + * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave + * channels. Fill with 'true' if peripheral should be flow controller. Direction + * will be selected at Runtime. * @addr: source/target address in physical memory for this DMA channel, * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring @@ -65,6 +68,7 @@ struct pl08x_channel_data { int max_signal; u32 muxval; u32 cctl; + bool device_fc; dma_addr_t addr; bool circular_buffer; bool single; -- cgit v1.2.3 From 1b9bb715e7c4c189c4215a11a09e2ccb16598d86 Mon Sep 17 00:00:00 2001 From: Boojin Kim Date: Fri, 2 Sep 2011 09:44:30 +0900 Subject: DMA: PL330: Update PL330 DMA API driver This patch updates following 3 items. 1. Removes unneccessary code. 2. Add AMBA, PL330 configuration 3. Change the meaning of 'peri_id' variable from PL330 event number to specific dma id by user. Signed-off-by: Boojin Kim Acked-by: Linus Walleij Acked-by: Vinod Koul Cc: Dan Williams Signed-off-by: Kukjin Kim Signed-off-by: Vinod Koul --- drivers/dma/Kconfig | 3 ++- drivers/dma/pl330.c | 14 +++++++++----- include/linux/amba/pl330.h | 6 +----- 3 files changed, 12 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 2e3b3d38c465..ab8f469f5cf8 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -193,7 +193,8 @@ config ARCH_HAS_ASYNC_TX_FIND_CHANNEL config PL330_DMA tristate "DMA API Driver for PL330" select DMA_ENGINE - depends on PL330 + depends on ARM_AMBA + select PL330 help Select if your platform has one or more PL330 DMACs. You need to provide platform specific settings via diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 0b99af18f9a1..d5829c734fad 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -18,6 +18,7 @@ #include #include #include +#include #define NR_DEFAULT_DESC 16 @@ -69,6 +70,10 @@ struct dma_pl330_chan { * NULL if the channel is available to be acquired. */ void *pl330_chid; + + /* For D-to-M and M-to-D channels */ + int burst_sz; /* the peripheral fifo width */ + dma_addr_t fifo_addr; }; struct dma_pl330_dmac { @@ -456,7 +461,7 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) if (peri) { desc->req.rqtype = peri->rqtype; - desc->req.peri = peri->peri_id; + desc->req.peri = pch->chan.chan_id; } else { desc->req.rqtype = MEMTOMEM; desc->req.peri = 0; @@ -582,7 +587,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, struct dma_pl330_peri *peri = chan->private; struct scatterlist *sg; unsigned long flags; - int i, burst_size; + int i; dma_addr_t addr; if (unlikely(!pch || !sgl || !sg_len || !peri)) @@ -598,8 +603,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, return NULL; } - addr = peri->fifo_addr; - burst_size = peri->burst_sz; + addr = pch->fifo_addr; first = NULL; @@ -647,7 +651,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, sg_dma_address(sg), addr, sg_dma_len(sg)); } - desc->rqcfg.brst_size = burst_size; + desc->rqcfg.brst_size = pch->burst_sz; desc->rqcfg.brst_len = 1; } diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h index cbee7de7dd36..d12f077a6daf 100644 --- a/include/linux/amba/pl330.h +++ b/include/linux/amba/pl330.h @@ -19,12 +19,8 @@ struct dma_pl330_peri { * Peri_Req i/f of the DMAC that is * peripheral could be reached from. */ - u8 peri_id; /* {0, 31} */ + u8 peri_id; /* specific dma id */ enum pl330_reqtype rqtype; - - /* For M->D and D->M Channels */ - int burst_sz; /* in power of 2 */ - dma_addr_t fifo_addr; }; struct dma_pl330_platdata { -- cgit v1.2.3 From 937bb6e4c676fecbfbc1939b942241c3f27bf5d8 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 24 Jun 2011 13:56:15 +0200 Subject: serial: sh-sci: don't filter on DMA device, use only channel ID On some sh-mobile systems there are more than one DMA controllers, that can be used for serial ports. Specifying a DMA device in sh-sci platform data unnecessarily restricts the driver to only use one DMA controller. Signed-off-by: Guennadi Liakhovetski [Fixed the trivial conflict in include/linux/serial_sci.h] Signed-off-by: Vinod Koul --- drivers/tty/serial/sh-sci.c | 25 ++++++++----------------- include/linux/serial_sci.h | 2 -- 2 files changed, 8 insertions(+), 19 deletions(-) (limited to 'include') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index a9414facda47..dbd32a1286d3 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1439,12 +1439,8 @@ static bool filter(struct dma_chan *chan, void *slave) dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__, param->slave_id); - if (param->dma_dev == chan->device->dev) { - chan->private = param; - return true; - } else { - return false; - } + chan->private = param; + return true; } static void rx_timer_fn(unsigned long arg) @@ -1470,10 +1466,10 @@ static void sci_request_dma(struct uart_port *port) dma_cap_mask_t mask; int nent; - dev_dbg(port->dev, "%s: port %d DMA %p\n", __func__, - port->line, s->cfg->dma_dev); + dev_dbg(port->dev, "%s: port %d\n", __func__, + port->line); - if (!s->cfg->dma_dev) + if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0) return; dma_cap_zero(mask); @@ -1483,7 +1479,6 @@ static void sci_request_dma(struct uart_port *port) /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */ param->slave_id = s->cfg->dma_slave_tx; - param->dma_dev = s->cfg->dma_dev; s->cookie_tx = -EINVAL; chan = dma_request_channel(mask, filter, param); @@ -1512,7 +1507,6 @@ static void sci_request_dma(struct uart_port *port) /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */ param->slave_id = s->cfg->dma_slave_rx; - param->dma_dev = s->cfg->dma_dev; chan = dma_request_channel(mask, filter, param); dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); @@ -1557,9 +1551,6 @@ static void sci_free_dma(struct uart_port *port) { struct sci_port *s = to_sci_port(port); - if (!s->cfg->dma_dev) - return; - if (s->chan_tx) sci_tx_dma_release(s, false); if (s->chan_rx) @@ -1967,9 +1958,9 @@ static int __devinit sci_init_single(struct platform_device *dev, port->serial_in = sci_serial_in; port->serial_out = sci_serial_out; - if (p->dma_dev) - dev_dbg(port->dev, "DMA device %p, tx %d, rx %d\n", - p->dma_dev, p->dma_slave_tx, p->dma_slave_rx); + if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) + dev_dbg(port->dev, "DMA tx %d, rx %d\n", + p->dma_slave_tx, p->dma_slave_rx); return 0; } diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 8bffe9ae2ca0..0efa1f10bc2b 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -131,8 +131,6 @@ struct plat_sci_port { struct plat_sci_port_ops *ops; - struct device *dma_dev; - unsigned int dma_slave_tx; unsigned int dma_slave_rx; }; -- cgit v1.2.3 From b7f69d9d4283cfbbf7458962cf9bdba6463b831d Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:43 +0530 Subject: dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers Untill now, sg_len greater than one is not supported. This patch adds support to do that. Note: Still, if peripheral is flow controller, sg_len can't be greater that one. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 378 ++++++++++++++++++++++++++------------------- include/linux/amba/pl08x.h | 22 ++- 2 files changed, 231 insertions(+), 169 deletions(-) (limited to 'include') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index cd8df7f5b5c8..2c390d1b9cad 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -352,7 +352,9 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) if (!list_empty(&plchan->pend_list)) { struct pl08x_txd *txdi; list_for_each_entry(txdi, &plchan->pend_list, node) { - bytes += txdi->len; + struct pl08x_sg *dsg; + list_for_each_entry(dsg, &txd->dsg_list, node) + bytes += dsg->len; } } @@ -567,8 +569,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_lli_build_data bd; int num_llis = 0; u32 cctl, early_bytes = 0; - size_t max_bytes_per_lli, total_bytes = 0; + size_t max_bytes_per_lli, total_bytes; struct pl08x_lli *llis_va; + struct pl08x_sg *dsg; txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); if (!txd->llis_va) { @@ -578,13 +581,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, pl08x->pool_ctr++; - /* Get the default CCTL */ - cctl = txd->cctl; - bd.txd = txd; - bd.srcbus.addr = txd->src_addr; - bd.dstbus.addr = txd->dst_addr; bd.lli_bus = (pl08x->lli_buses & PL08X_AHB2) ? PL080_LLI_LM_AHB2 : 0; + cctl = txd->cctl; /* Find maximum width of the source bus */ bd.srcbus.maxwidth = @@ -596,162 +595,179 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >> PL080_CONTROL_DWIDTH_SHIFT); - /* Set up the bus widths to the maximum */ - bd.srcbus.buswidth = bd.srcbus.maxwidth; - bd.dstbus.buswidth = bd.dstbus.maxwidth; + list_for_each_entry(dsg, &txd->dsg_list, node) { + total_bytes = 0; + cctl = txd->cctl; - /* We need to count this down to zero */ - bd.remainder = txd->len; + bd.srcbus.addr = dsg->src_addr; + bd.dstbus.addr = dsg->dst_addr; + bd.remainder = dsg->len; + bd.srcbus.buswidth = bd.srcbus.maxwidth; + bd.dstbus.buswidth = bd.dstbus.maxwidth; - pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); + pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); - dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n", - bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "", - bd.srcbus.buswidth, - bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "", - bd.dstbus.buswidth, - bd.remainder); - dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n", - mbus == &bd.srcbus ? "src" : "dst", - sbus == &bd.srcbus ? "src" : "dst"); + dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n", + bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "", + bd.srcbus.buswidth, + bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "", + bd.dstbus.buswidth, + bd.remainder); + dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n", + mbus == &bd.srcbus ? "src" : "dst", + sbus == &bd.srcbus ? "src" : "dst"); - /* - * Zero length is only allowed if all these requirements are met: - * - flow controller is peripheral. - * - src.addr is aligned to src.width - * - dst.addr is aligned to dst.width - * - * sg_len == 1 should be true, as there can be two cases here: - * - Memory addresses are contiguous and are not scattered. Here, Only - * one sg will be passed by user driver, with memory address and zero - * length. We pass this to controller and after the transfer it will - * receive the last burst request from peripheral and so transfer - * finishes. - * - * - Memory addresses are scattered and are not contiguous. Here, - * Obviously as DMA controller doesn't know when a lli's transfer gets - * over, it can't load next lli. So in this case, there has to be an - * assumption that only one lli is supported. Thus, we can't have - * scattered addresses. - */ - if (!bd.remainder) { - u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >> - PL080_CONFIG_FLOW_CONTROL_SHIFT; - if (!((fc >= PL080_FLOW_SRC2DST_DST) && + /* + * Zero length is only allowed if all these requirements are + * met: + * - flow controller is peripheral. + * - src.addr is aligned to src.width + * - dst.addr is aligned to dst.width + * + * sg_len == 1 should be true, as there can be two cases here: + * + * - Memory addresses are contiguous and are not scattered. + * Here, Only one sg will be passed by user driver, with + * memory address and zero length. We pass this to controller + * and after the transfer it will receive the last burst + * request from peripheral and so transfer finishes. + * + * - Memory addresses are scattered and are not contiguous. + * Here, Obviously as DMA controller doesn't know when a lli's + * transfer gets over, it can't load next lli. So in this + * case, there has to be an assumption that only one lli is + * supported. Thus, we can't have scattered addresses. + */ + if (!bd.remainder) { + u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >> + PL080_CONFIG_FLOW_CONTROL_SHIFT; + if (!((fc >= PL080_FLOW_SRC2DST_DST) && (fc <= PL080_FLOW_SRC2DST_SRC))) { - dev_err(&pl08x->adev->dev, "%s sg len can't be zero", - __func__); - return 0; - } - - if ((bd.srcbus.addr % bd.srcbus.buswidth) || - (bd.srcbus.addr % bd.srcbus.buswidth)) { - dev_err(&pl08x->adev->dev, - "%s src & dst address must be aligned to src" - " & dst width if peripheral is flow controller", - __func__); - return 0; - } - - cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, - bd.dstbus.buswidth, 0); - pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl); - } + dev_err(&pl08x->adev->dev, "%s sg len can't be zero", + __func__); + return 0; + } - /* - * Send byte by byte for following cases - * - Less than a bus width available - * - until master bus is aligned - */ - if (bd.remainder < mbus->buswidth) - early_bytes = bd.remainder; - else if ((mbus->addr) % (mbus->buswidth)) { - early_bytes = mbus->buswidth - (mbus->addr) % (mbus->buswidth); - if ((bd.remainder - early_bytes) < mbus->buswidth) - early_bytes = bd.remainder; - } + if ((bd.srcbus.addr % bd.srcbus.buswidth) || + (bd.srcbus.addr % bd.srcbus.buswidth)) { + dev_err(&pl08x->adev->dev, + "%s src & dst address must be aligned to src" + " & dst width if peripheral is flow controller", + __func__); + return 0; + } - if (early_bytes) { - dev_vdbg(&pl08x->adev->dev, "%s byte width LLIs " - "(remain 0x%08x)\n", __func__, bd.remainder); - prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++, - &total_bytes); - } + cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, + bd.dstbus.buswidth, 0); + pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl); + break; + } - if (bd.remainder) { /* - * Master now aligned - * - if slave is not then we must set its width down + * Send byte by byte for following cases + * - Less than a bus width available + * - until master bus is aligned */ - if (sbus->addr % sbus->buswidth) { - dev_dbg(&pl08x->adev->dev, - "%s set down bus width to one byte\n", - __func__); + if (bd.remainder < mbus->buswidth) + early_bytes = bd.remainder; + else if ((mbus->addr) % (mbus->buswidth)) { + early_bytes = mbus->buswidth - (mbus->addr) % + (mbus->buswidth); + if ((bd.remainder - early_bytes) < mbus->buswidth) + early_bytes = bd.remainder; + } - sbus->buswidth = 1; + if (early_bytes) { + dev_vdbg(&pl08x->adev->dev, + "%s byte width LLIs (remain 0x%08x)\n", + __func__, bd.remainder); + prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++, + &total_bytes); } - /* Bytes transferred = tsize * src width, not MIN(buswidths) */ - max_bytes_per_lli = bd.srcbus.buswidth * - PL080_CONTROL_TRANSFER_SIZE_MASK; + if (bd.remainder) { + /* + * Master now aligned + * - if slave is not then we must set its width down + */ + if (sbus->addr % sbus->buswidth) { + dev_dbg(&pl08x->adev->dev, + "%s set down bus width to one byte\n", + __func__); - /* - * Make largest possible LLIs until less than one bus - * width left - */ - while (bd.remainder > (mbus->buswidth - 1)) { - size_t lli_len, tsize, width; + sbus->buswidth = 1; + } /* - * If enough left try to send max possible, - * otherwise try to send the remainder + * Bytes transferred = tsize * src width, not + * MIN(buswidths) */ - lli_len = min(bd.remainder, max_bytes_per_lli); + max_bytes_per_lli = bd.srcbus.buswidth * + PL080_CONTROL_TRANSFER_SIZE_MASK; + dev_vdbg(&pl08x->adev->dev, + "%s max bytes per lli = %zu\n", + __func__, max_bytes_per_lli); /* - * Check against maximum bus alignment: Calculate actual - * transfer size in relation to bus width and get a - * maximum remainder of the highest bus width - 1 + * Make largest possible LLIs until less than one bus + * width left */ - width = max(mbus->buswidth, sbus->buswidth); - lli_len = (lli_len / width) * width; - tsize = lli_len / bd.srcbus.buswidth; + while (bd.remainder > (mbus->buswidth - 1)) { + size_t lli_len, tsize, width; - dev_vdbg(&pl08x->adev->dev, - "%s fill lli with single lli chunk of " - "size 0x%08zx (remainder 0x%08zx)\n", - __func__, lli_len, bd.remainder); + /* + * If enough left try to send max possible, + * otherwise try to send the remainder + */ + lli_len = min(bd.remainder, max_bytes_per_lli); - cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, + /* + * Check against maximum bus alignment: + * Calculate actual transfer size in relation to + * bus width an get a maximum remainder of the + * highest bus width - 1 + */ + width = max(mbus->buswidth, sbus->buswidth); + lli_len = (lli_len / width) * width; + tsize = lli_len / bd.srcbus.buswidth; + + dev_vdbg(&pl08x->adev->dev, + "%s fill lli with single lli chunk of " + "size 0x%08zx (remainder 0x%08zx)\n", + __func__, lli_len, bd.remainder); + + cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, bd.dstbus.buswidth, tsize); - pl08x_fill_lli_for_desc(&bd, num_llis++, lli_len, cctl); - total_bytes += lli_len; - } + pl08x_fill_lli_for_desc(&bd, num_llis++, + lli_len, cctl); + total_bytes += lli_len; + } - /* - * Send any odd bytes - */ - if (bd.remainder) { - dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, send odd bytes (remain %zu)\n", - __func__, bd.remainder); - prep_byte_width_lli(&bd, &cctl, bd.remainder, - num_llis++, &total_bytes); + /* + * Send any odd bytes + */ + if (bd.remainder) { + dev_vdbg(&pl08x->adev->dev, + "%s align with boundary, send odd bytes (remain %zu)\n", + __func__, bd.remainder); + prep_byte_width_lli(&bd, &cctl, bd.remainder, + num_llis++, &total_bytes); + } } - } - if (total_bytes != txd->len) { - dev_err(&pl08x->adev->dev, - "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n", - __func__, total_bytes, txd->len); - return 0; - } + if (total_bytes != dsg->len) { + dev_err(&pl08x->adev->dev, + "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n", + __func__, total_bytes, dsg->len); + return 0; + } - if (num_llis >= MAX_NUM_TSFR_LLIS) { - dev_err(&pl08x->adev->dev, - "%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n", - __func__, (u32) MAX_NUM_TSFR_LLIS); - return 0; + if (num_llis >= MAX_NUM_TSFR_LLIS) { + dev_err(&pl08x->adev->dev, + "%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n", + __func__, (u32) MAX_NUM_TSFR_LLIS); + return 0; + } } llis_va = txd->llis_va; @@ -784,11 +800,18 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, static void pl08x_free_txd(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd) { + struct pl08x_sg *dsg, *_dsg; + /* Free the LLI */ dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus); pl08x->pool_ctr--; + list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) { + list_del(&dsg->node); + kfree(dsg); + } + kfree(txd); } @@ -1234,6 +1257,7 @@ static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan, txd->tx.flags = flags; txd->tx.tx_submit = pl08x_tx_submit; INIT_LIST_HEAD(&txd->node); + INIT_LIST_HEAD(&txd->dsg_list); /* Always enable error and terminal interrupts */ txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK | @@ -1252,6 +1276,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; + struct pl08x_sg *dsg; int ret; txd = pl08x_get_txd(plchan, flags); @@ -1261,10 +1286,19 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( return NULL; } + dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT); + if (!dsg) { + pl08x_free_txd(pl08x, txd); + dev_err(&pl08x->adev->dev, "%s no memory for pl080 sg\n", + __func__); + return NULL; + } + list_add_tail(&dsg->node, &txd->dsg_list); + txd->direction = DMA_NONE; - txd->src_addr = src; - txd->dst_addr = dest; - txd->len = len; + dsg->src_addr = src; + dsg->dst_addr = dest; + dsg->len = len; /* Set platform data for m2m */ txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; @@ -1293,19 +1327,13 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; + struct pl08x_sg *dsg; + struct scatterlist *sg; + dma_addr_t slave_addr; int ret, tmp; - /* - * Current implementation ASSUMES only one sg - */ - if (sg_len != 1) { - dev_err(&pl08x->adev->dev, "%s prepared too long sglist\n", - __func__); - BUG(); - } - dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", - __func__, sgl->length, plchan->name); + __func__, sgl->length, plchan->name); txd = pl08x_get_txd(plchan, flags); if (!txd) { @@ -1324,17 +1352,15 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( * channel target address dynamically at runtime. */ txd->direction = direction; - txd->len = sgl->length; if (direction == DMA_TO_DEVICE) { txd->cctl = plchan->dst_cctl; - txd->src_addr = sgl->dma_address; - txd->dst_addr = plchan->dst_addr; + slave_addr = plchan->dst_addr; } else if (direction == DMA_FROM_DEVICE) { txd->cctl = plchan->src_cctl; - txd->src_addr = plchan->src_addr; - txd->dst_addr = sgl->dma_address; + slave_addr = plchan->src_addr; } else { + pl08x_free_txd(pl08x, txd); dev_err(&pl08x->adev->dev, "%s direction unsupported\n", __func__); return NULL; @@ -1349,6 +1375,26 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT; + for_each_sg(sgl, sg, sg_len, tmp) { + dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT); + if (!dsg) { + pl08x_free_txd(pl08x, txd); + dev_err(&pl08x->adev->dev, "%s no mem for pl080 sg\n", + __func__); + return NULL; + } + list_add_tail(&dsg->node, &txd->dsg_list); + + dsg->len = sg_dma_len(sg); + if (direction == DMA_TO_DEVICE) { + dsg->src_addr = sg_phys(sg); + dsg->dst_addr = slave_addr; + } else { + dsg->src_addr = slave_addr; + dsg->dst_addr = sg_phys(sg); + } + } + ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; @@ -1452,22 +1498,28 @@ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) static void pl08x_unmap_buffers(struct pl08x_txd *txd) { struct device *dev = txd->tx.chan->device->dev; + struct pl08x_sg *dsg; if (!(txd->tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { if (txd->tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) - dma_unmap_single(dev, txd->src_addr, txd->len, - DMA_TO_DEVICE); - else - dma_unmap_page(dev, txd->src_addr, txd->len, - DMA_TO_DEVICE); + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_single(dev, dsg->src_addr, dsg->len, + DMA_TO_DEVICE); + else { + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_page(dev, dsg->src_addr, dsg->len, + DMA_TO_DEVICE); + } } if (!(txd->tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { if (txd->tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) - dma_unmap_single(dev, txd->dst_addr, txd->len, - DMA_FROM_DEVICE); + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_single(dev, dsg->dst_addr, dsg->len, + DMA_FROM_DEVICE); else - dma_unmap_page(dev, txd->dst_addr, txd->len, - DMA_FROM_DEVICE); + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_page(dev, dsg->dst_addr, dsg->len, + DMA_FROM_DEVICE); } } diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index a22662c93981..9eabffbc4e50 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -105,13 +105,25 @@ struct pl08x_phy_chan { struct pl08x_dma_chan *serving; }; +/** + * struct pl08x_sg - structure containing data per sg + * @src_addr: src address of sg + * @dst_addr: dst address of sg + * @len: transfer len in bytes + * @node: node for txd's dsg_list + */ +struct pl08x_sg { + dma_addr_t src_addr; + dma_addr_t dst_addr; + size_t len; + struct list_head node; +}; + /** * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor * @tx: async tx descriptor * @node: node for txd list for channels - * @src_addr: src address of txd - * @dst_addr: dst address of txd - * @len: transfer len in bytes + * @dsg_list: list of children sg's * @direction: direction of transfer * @llis_bus: DMA memory address (physical) start for the LLIs * @llis_va: virtual memory address start for the LLIs @@ -121,10 +133,8 @@ struct pl08x_phy_chan { struct pl08x_txd { struct dma_async_tx_descriptor tx; struct list_head node; + struct list_head dsg_list; enum dma_data_direction direction; - dma_addr_t src_addr; - dma_addr_t dst_addr; - size_t len; dma_addr_t llis_bus; struct pl08x_lli *llis_va; /* Default cctl value for LLIs */ -- cgit v1.2.3