From 6ad3122a08e3a9c2148873665752e87cf4f393cc Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Mon, 22 Feb 2016 10:40:07 +0100 Subject: flowcache: Avoid OOM condition under preasure We can hit an OOM condition if we are under presure because we can not free the entries in gc_list fast enough. So add a counter for the not yet freed entries in the gc_list and refuse new allocations if the value is too high. Signed-off-by: Steffen Klassert --- include/net/netns/xfrm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/netns/xfrm.h b/include/net/netns/xfrm.h index 730d82ad6ee5..24cd3949a9a4 100644 --- a/include/net/netns/xfrm.h +++ b/include/net/netns/xfrm.h @@ -80,6 +80,7 @@ struct netns_xfrm { struct flow_cache flow_cache_global; atomic_t flow_cache_genid; struct list_head flow_cache_gc_list; + atomic_t flow_cache_gc_count; spinlock_t flow_cache_gc_lock; struct work_struct flow_cache_gc_work; struct work_struct flow_cache_flush_work; -- cgit v1.2.3 From 3b672623079bb3e5685b8549e514f2dfaa564406 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 28 Mar 2016 13:09:56 +0900 Subject: regulator: s2mps11: Fix invalid selector mask and voltages for buck9 The buck9 regulator of S2MPS11 PMIC had incorrect vsel_mask (0xff instead of 0x1f) thus reading entire register as buck9's voltage. This effectively caused regulator core to interpret values as higher voltages than they were and then to set real voltage much lower than intended. The buck9 provides power to other regulators, including LDO13 and LDO19 which supply the MMC2 (SD card). On Odroid XU3/XU4 the lower voltage caused SD card detection errors on Odroid XU3/XU4: mmc1: card never left busy state mmc1: error -110 whilst initialising SD card During driver probe the regulator core was checking whether initial voltage matches the constraints. With incorrect vsel_mask of 0xff and default value of 0x50, the core interpreted this as 5 V which is outside of constraints (3-3.775 V). Then the regulator core was adjusting the voltage to match the constraints. With incorrect vsel_mask this new voltage mapped to a vere low voltage in the driver. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Signed-off-by: Mark Brown Cc: --- drivers/regulator/s2mps11.c | 28 ++++++++++++++++++++++------ include/linux/mfd/samsung/s2mps11.h | 2 ++ 2 files changed, 24 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index d24e2c783dc5..6dfa3502e1f1 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -308,7 +308,7 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_s2mps11_buck6_10(num, min, step) { \ +#define regulator_desc_s2mps11_buck67810(num, min, step) { \ .name = "BUCK"#num, \ .id = S2MPS11_BUCK##num, \ .ops = &s2mps11_buck_ops, \ @@ -324,6 +324,22 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } +#define regulator_desc_s2mps11_buck9 { \ + .name = "BUCK9", \ + .id = S2MPS11_BUCK9, \ + .ops = &s2mps11_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = MIN_3000_MV, \ + .uV_step = STEP_25_MV, \ + .n_voltages = S2MPS11_BUCK9_N_VOLTAGES, \ + .ramp_delay = S2MPS11_RAMP_DELAY, \ + .vsel_reg = S2MPS11_REG_B9CTRL2, \ + .vsel_mask = S2MPS11_BUCK9_VSEL_MASK, \ + .enable_reg = S2MPS11_REG_B9CTRL1, \ + .enable_mask = S2MPS11_ENABLE_MASK \ +} + static const struct regulator_desc s2mps11_regulators[] = { regulator_desc_s2mps11_ldo(1, STEP_25_MV), regulator_desc_s2mps11_ldo(2, STEP_50_MV), @@ -368,11 +384,11 @@ static const struct regulator_desc s2mps11_regulators[] = { regulator_desc_s2mps11_buck1_4(3), regulator_desc_s2mps11_buck1_4(4), regulator_desc_s2mps11_buck5, - regulator_desc_s2mps11_buck6_10(6, MIN_600_MV, STEP_6_25_MV), - regulator_desc_s2mps11_buck6_10(7, MIN_600_MV, STEP_6_25_MV), - regulator_desc_s2mps11_buck6_10(8, MIN_600_MV, STEP_6_25_MV), - regulator_desc_s2mps11_buck6_10(9, MIN_3000_MV, STEP_25_MV), - regulator_desc_s2mps11_buck6_10(10, MIN_750_MV, STEP_12_5_MV), + regulator_desc_s2mps11_buck67810(6, MIN_600_MV, STEP_6_25_MV), + regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_6_25_MV), + regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_6_25_MV), + regulator_desc_s2mps11_buck9, + regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV), }; static struct regulator_ops s2mps14_reg_ops; diff --git a/include/linux/mfd/samsung/s2mps11.h b/include/linux/mfd/samsung/s2mps11.h index b288965e8101..2c14eeca46f0 100644 --- a/include/linux/mfd/samsung/s2mps11.h +++ b/include/linux/mfd/samsung/s2mps11.h @@ -173,10 +173,12 @@ enum s2mps11_regulators { #define S2MPS11_LDO_VSEL_MASK 0x3F #define S2MPS11_BUCK_VSEL_MASK 0xFF +#define S2MPS11_BUCK9_VSEL_MASK 0x1F #define S2MPS11_ENABLE_MASK (0x03 << S2MPS11_ENABLE_SHIFT) #define S2MPS11_ENABLE_SHIFT 0x06 #define S2MPS11_LDO_N_VOLTAGES (S2MPS11_LDO_VSEL_MASK + 1) #define S2MPS11_BUCK_N_VOLTAGES (S2MPS11_BUCK_VSEL_MASK + 1) +#define S2MPS11_BUCK9_N_VOLTAGES (S2MPS11_BUCK9_VSEL_MASK + 1) #define S2MPS11_RAMP_DELAY 25000 /* uV/us */ #define S2MPS11_CTRL1_PWRHOLD_MASK BIT(4) -- cgit v1.2.3 From e42839b012eb8179ed2e3571bfcd133fba5df154 Mon Sep 17 00:00:00 2001 From: Mengdong Lin Date: Thu, 24 Mar 2016 10:53:14 +0800 Subject: ASoC: topology: ABI - Define types for vendor tuples Tuples, a pair of token and value, can be used to define vendor specific data, for controls and widgets. This can avoid importing binary data blob from other files. Vendor specific tuple arrays will be embeded in the private data buffer of a control or widget object. To be backward compatible, union is used to define the tuple arrays in the existing private data ABI object 'struct snd_soc_tplg_private'. Vendors need to make sure the token values defined by the topology conf file match those defined by their driver. Now supported tuple types are uuid, string, bool, byte, short and word. Signed-off-by: Mengdong Lin Signed-off-by: Mark Brown --- include/uapi/sound/asoc.h | 42 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/uapi/sound/asoc.h b/include/uapi/sound/asoc.h index c4cc1e40b35c..db86b447b515 100644 --- a/include/uapi/sound/asoc.h +++ b/include/uapi/sound/asoc.h @@ -116,6 +116,14 @@ #define SND_SOC_TPLG_STREAM_PLAYBACK 0 #define SND_SOC_TPLG_STREAM_CAPTURE 1 +/* vendor tuple types */ +#define SND_SOC_TPLG_TUPLE_TYPE_UUID 0 +#define SND_SOC_TPLG_TUPLE_TYPE_STRING 1 +#define SND_SOC_TPLG_TUPLE_TYPE_BOOL 2 +#define SND_SOC_TPLG_TUPLE_TYPE_BYTE 3 +#define SND_SOC_TPLG_TUPLE_TYPE_WORD 4 +#define SND_SOC_TPLG_TUPLE_TYPE_SHORT 5 + /* * Block Header. * This header precedes all object and object arrays below. @@ -132,6 +140,35 @@ struct snd_soc_tplg_hdr { __le32 count; /* number of elements in block */ } __attribute__((packed)); +/* vendor tuple for uuid */ +struct snd_soc_tplg_vendor_uuid_elem { + __le32 token; + char uuid[16]; +} __attribute__((packed)); + +/* vendor tuple for a bool/byte/short/word value */ +struct snd_soc_tplg_vendor_value_elem { + __le32 token; + __le32 value; +} __attribute__((packed)); + +/* vendor tuple for string */ +struct snd_soc_tplg_vendor_string_elem { + __le32 token; + char string[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; +} __attribute__((packed)); + +struct snd_soc_tplg_vendor_array { + __le32 size; /* size in bytes of the array, including all elements */ + __le32 type; /* SND_SOC_TPLG_TUPLE_TYPE_ */ + __le32 num_elems; /* number of elements in array */ + union { + struct snd_soc_tplg_vendor_uuid_elem uuid[0]; + struct snd_soc_tplg_vendor_value_elem value[0]; + struct snd_soc_tplg_vendor_string_elem string[0]; + }; +} __attribute__((packed)); + /* * Private data. * All topology objects may have private data that can be used by the driver or @@ -139,7 +176,10 @@ struct snd_soc_tplg_hdr { */ struct snd_soc_tplg_private { __le32 size; /* in bytes of private data */ - char data[0]; + union { + char data[0]; + struct snd_soc_tplg_vendor_array array[0]; + }; } __attribute__((packed)); /* -- cgit v1.2.3 From 357f435d8a0d32068c75f3c7176434d992b3adb7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 8 Apr 2016 19:05:19 -0400 Subject: fix the copy vs. map logics in blk_rq_map_user_iov() Signed-off-by: Al Viro --- block/blk-map.c | 47 ++++++++--------------------------------------- include/linux/uio.h | 1 + lib/iov_iter.c | 19 +++++++++++++++++++ 3 files changed, 28 insertions(+), 39 deletions(-) (limited to 'include') diff --git a/block/blk-map.c b/block/blk-map.c index a54f0543b956..b9f88b7751fb 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -9,24 +9,6 @@ #include "blk.h" -static bool iovec_gap_to_prv(struct request_queue *q, - struct iovec *prv, struct iovec *cur) -{ - unsigned long prev_end; - - if (!queue_virt_boundary(q)) - return false; - - if (prv->iov_base == NULL && prv->iov_len == 0) - /* prv is not set - don't check */ - return false; - - prev_end = (unsigned long)(prv->iov_base + prv->iov_len); - - return (((unsigned long)cur->iov_base & queue_virt_boundary(q)) || - prev_end & queue_virt_boundary(q)); -} - int blk_rq_append_bio(struct request_queue *q, struct request *rq, struct bio *bio) { @@ -125,31 +107,18 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq, struct rq_map_data *map_data, const struct iov_iter *iter, gfp_t gfp_mask) { - struct iovec iov, prv = {.iov_base = NULL, .iov_len = 0}; - bool copy = (q->dma_pad_mask & iter->count) || map_data; + bool copy = false; + unsigned long align = q->dma_pad_mask | queue_dma_alignment(q); struct bio *bio = NULL; struct iov_iter i; int ret; - if (!iter || !iter->count) - return -EINVAL; - - iov_for_each(iov, i, *iter) { - unsigned long uaddr = (unsigned long) iov.iov_base; - - if (!iov.iov_len) - return -EINVAL; - - /* - * Keep going so we check length of all segments - */ - if ((uaddr & queue_dma_alignment(q)) || - iovec_gap_to_prv(q, &prv, &iov)) - copy = true; - - prv.iov_base = iov.iov_base; - prv.iov_len = iov.iov_len; - } + if (map_data) + copy = true; + else if (iov_iter_alignment(iter) & align) + copy = true; + else if (queue_virt_boundary(q)) + copy = queue_virt_boundary(q) & iov_iter_gap_alignment(iter); i = *iter; do { diff --git a/include/linux/uio.h b/include/linux/uio.h index fd9bcfedad42..1b5d1cd796e2 100644 --- a/include/linux/uio.h +++ b/include/linux/uio.h @@ -87,6 +87,7 @@ size_t copy_from_iter(void *addr, size_t bytes, struct iov_iter *i); size_t copy_from_iter_nocache(void *addr, size_t bytes, struct iov_iter *i); size_t iov_iter_zero(size_t bytes, struct iov_iter *); unsigned long iov_iter_alignment(const struct iov_iter *i); +unsigned long iov_iter_gap_alignment(const struct iov_iter *i); void iov_iter_init(struct iov_iter *i, int direction, const struct iovec *iov, unsigned long nr_segs, size_t count); void iov_iter_kvec(struct iov_iter *i, int direction, const struct kvec *kvec, diff --git a/lib/iov_iter.c b/lib/iov_iter.c index 5fecddc32b1b..ca5316e0087b 100644 --- a/lib/iov_iter.c +++ b/lib/iov_iter.c @@ -569,6 +569,25 @@ unsigned long iov_iter_alignment(const struct iov_iter *i) } EXPORT_SYMBOL(iov_iter_alignment); +unsigned long iov_iter_gap_alignment(const struct iov_iter *i) +{ + unsigned long res = 0; + size_t size = i->count; + if (!size) + return 0; + + iterate_all_kinds(i, size, v, + (res |= (!res ? 0 : (unsigned long)v.iov_base) | + (size != v.iov_len ? size : 0), 0), + (res |= (!res ? 0 : (unsigned long)v.bv_offset) | + (size != v.bv_len ? size : 0)), + (res |= (!res ? 0 : (unsigned long)v.iov_base) | + (size != v.iov_len ? size : 0)) + ); + return res; +} +EXPORT_SYMBOL(iov_iter_gap_alignment); + ssize_t iov_iter_get_pages(struct iov_iter *i, struct page **pages, size_t maxsize, unsigned maxpages, size_t *start) -- cgit v1.2.3 From b84fff5afb16627a8973256992f3951ac3e90d84 Mon Sep 17 00:00:00 2001 From: Mengdong Lin Date: Tue, 19 Apr 2016 13:12:43 +0800 Subject: ASoC: topology: Set the link ID when creating a FE DAI link Topology will set the link's generic id when creating a FE link. Device drivers can check the id for link specific initialization. Signed-off-by: Mengdong Lin Signed-off-by: Mark Brown --- include/uapi/sound/asoc.h | 2 +- sound/soc/soc-topology.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/uapi/sound/asoc.h b/include/uapi/sound/asoc.h index db86b447b515..e4701a3c6331 100644 --- a/include/uapi/sound/asoc.h +++ b/include/uapi/sound/asoc.h @@ -423,7 +423,7 @@ struct snd_soc_tplg_pcm { __le32 size; /* in bytes of this structure */ char pcm_name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; char dai_name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; - __le32 pcm_id; /* unique ID - used to match */ + __le32 pcm_id; /* unique ID - used to match with DAI link */ __le32 dai_id; /* unique ID - used to match */ __le32 playback; /* supports playback mode */ __le32 capture; /* supports capture mode */ diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 1cf94d7fb9f4..bdbfcef4c319 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -1598,6 +1598,7 @@ static int soc_tplg_link_create(struct soc_tplg *tplg, link->name = pcm->pcm_name; link->stream_name = pcm->pcm_name; + link->id = pcm->pcm_id; /* pass control to component driver for optional further init */ ret = soc_tplg_dai_link_load(tplg, link); -- cgit v1.2.3 From 43b8448cd7b42a4c39476c9a12c960c1408f1946 Mon Sep 17 00:00:00 2001 From: Jarno Rajahalme Date: Tue, 3 May 2016 16:10:20 -0700 Subject: udp_tunnel: Remove redundant udp_tunnel_gro_complete(). The setting of the UDP tunnel GSO type is already performed by udp[46]_gro_complete(). Signed-off-by: Jarno Rajahalme Signed-off-by: David S. Miller --- drivers/net/geneve.c | 2 -- drivers/net/vxlan.c | 2 -- include/net/udp_tunnel.h | 9 --------- net/ipv4/fou.c | 2 -- 4 files changed, 15 deletions(-) (limited to 'include') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index bc168894bda3..98f12244714f 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -504,8 +504,6 @@ static int geneve_gro_complete(struct sk_buff *skb, int nhoff, int gh_len; int err = -ENOSYS; - udp_tunnel_gro_complete(skb, nhoff); - gh = (struct genevehdr *)(skb->data + nhoff); gh_len = geneve_hlen(gh); type = gh->proto_type; diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 1c0fa364323e..dd2d032fba5f 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -616,8 +616,6 @@ out: static int vxlan_gro_complete(struct sk_buff *skb, int nhoff, struct udp_offload *uoff) { - udp_tunnel_gro_complete(skb, nhoff); - return eth_gro_complete(skb, nhoff + sizeof(struct vxlanhdr)); } diff --git a/include/net/udp_tunnel.h b/include/net/udp_tunnel.h index b83114077cee..a1140249ec25 100644 --- a/include/net/udp_tunnel.h +++ b/include/net/udp_tunnel.h @@ -106,15 +106,6 @@ static inline struct sk_buff *udp_tunnel_handle_offloads(struct sk_buff *skb, return iptunnel_handle_offloads(skb, type); } -static inline void udp_tunnel_gro_complete(struct sk_buff *skb, int nhoff) -{ - struct udphdr *uh; - - uh = (struct udphdr *)(skb->data + nhoff - sizeof(struct udphdr)); - skb_shinfo(skb)->gso_type |= uh->check ? - SKB_GSO_UDP_TUNNEL_CSUM : SKB_GSO_UDP_TUNNEL; -} - static inline void udp_tunnel_encap_enable(struct socket *sock) { #if IS_ENABLED(CONFIG_IPV6) diff --git a/net/ipv4/fou.c b/net/ipv4/fou.c index a39068b4a4d9..305d9ac68bd9 100644 --- a/net/ipv4/fou.c +++ b/net/ipv4/fou.c @@ -228,8 +228,6 @@ static int fou_gro_complete(struct sk_buff *skb, int nhoff, int err = -ENOSYS; const struct net_offload **offloads; - udp_tunnel_gro_complete(skb, nhoff); - rcu_read_lock(); offloads = NAPI_GRO_CB(skb)->is_ipv6 ? inet6_offloads : inet_offloads; ops = rcu_dereference(offloads[proto]); -- cgit v1.2.3 From 229740c63169462a838a8b8e16391ed000934631 Mon Sep 17 00:00:00 2001 From: Jarno Rajahalme Date: Tue, 3 May 2016 16:10:21 -0700 Subject: udp_offload: Set encapsulation before inner completes. UDP tunnel segmentation code relies on the inner offsets being set for an UDP tunnel GSO packet, but the inner *_complete() functions will set the inner offsets only if 'encapsulation' is set before calling them. Currently, udp_gro_complete() sets 'encapsulation' only after the inner *_complete() functions are done. This causes the inner offsets having invalid values after udp_gro_complete() returns, which in turn will make it impossible to properly segment the packet in case it needs to be forwarded, which would be visible to the user either as invalid packets being sent or as packet loss. This patch fixes this by setting skb's 'encapsulation' in udp_gro_complete() before calling into the inner complete functions, and by making each possible UDP tunnel gro_complete() callback set the inner_mac_header to the beginning of the tunnel payload. Signed-off-by: Jarno Rajahalme Reviewed-by: Alexander Duyck Signed-off-by: David S. Miller --- drivers/net/geneve.c | 3 +++ drivers/net/vxlan.c | 3 +++ include/linux/netdevice.h | 3 +++ net/ipv4/fou.c | 4 ++++ net/ipv4/udp_offload.c | 8 +++++--- 5 files changed, 18 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 98f12244714f..7b0a644122eb 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -514,6 +514,9 @@ static int geneve_gro_complete(struct sk_buff *skb, int nhoff, err = ptype->callbacks.gro_complete(skb, nhoff + gh_len); rcu_read_unlock(); + + skb_set_inner_mac_header(skb, nhoff + gh_len); + return err; } diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index dd2d032fba5f..8ac261ab7d7d 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -616,6 +616,9 @@ out: static int vxlan_gro_complete(struct sk_buff *skb, int nhoff, struct udp_offload *uoff) { + /* Sets 'skb->inner_mac_header' since we are always called with + * 'skb->encapsulation' set. + */ return eth_gro_complete(skb, nhoff + sizeof(struct vxlanhdr)); } diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index b3c46b019ac1..78181a88903b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2164,6 +2164,9 @@ struct packet_offload { struct udp_offload; +/* 'skb->encapsulation' is set before gro_complete() is called. gro_complete() + * must set 'skb->inner_mac_header' to the beginning of tunnel payload. + */ struct udp_offload_callbacks { struct sk_buff **(*gro_receive)(struct sk_buff **head, struct sk_buff *skb, diff --git a/net/ipv4/fou.c b/net/ipv4/fou.c index 305d9ac68bd9..a6962ccad98a 100644 --- a/net/ipv4/fou.c +++ b/net/ipv4/fou.c @@ -236,6 +236,8 @@ static int fou_gro_complete(struct sk_buff *skb, int nhoff, err = ops->callbacks.gro_complete(skb, nhoff); + skb_set_inner_mac_header(skb, nhoff); + out_unlock: rcu_read_unlock(); @@ -412,6 +414,8 @@ static int gue_gro_complete(struct sk_buff *skb, int nhoff, err = ops->callbacks.gro_complete(skb, nhoff + guehlen); + skb_set_inner_mac_header(skb, nhoff + guehlen); + out_unlock: rcu_read_unlock(); return err; diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c index 0ed2dafb7cc4..e330c0e56b11 100644 --- a/net/ipv4/udp_offload.c +++ b/net/ipv4/udp_offload.c @@ -399,6 +399,11 @@ int udp_gro_complete(struct sk_buff *skb, int nhoff) uh->len = newlen; + /* Set encapsulation before calling into inner gro_complete() functions + * to make them set up the inner offsets. + */ + skb->encapsulation = 1; + rcu_read_lock(); uo_priv = rcu_dereference(udp_offload_base); @@ -421,9 +426,6 @@ int udp_gro_complete(struct sk_buff *skb, int nhoff) if (skb->remcsum_offload) skb_shinfo(skb)->gso_type |= SKB_GSO_TUNNEL_REMCSUM; - skb->encapsulation = 1; - skb_set_inner_mac_header(skb, nhoff + sizeof(struct udphdr)); - return err; } -- cgit v1.2.3 From 8acca6acebd07b238af2e61e4f7d55e6232c7e3a Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Sat, 7 May 2016 20:19:29 +0200 Subject: macsec: key identifier is 128 bits, not 64 The MACsec standard mentions a key identifier for each key, but doesn't specify anything about it, so I arbitrarily chose 64 bits. IEEE 802.1X-2010 specifies MKA (MACsec Key Agreement), and defines the key identifier to be 128 bits (96 bits "member identifier" + 32 bits "key number"). Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- drivers/net/macsec.c | 19 +++++++++++++------ include/uapi/linux/if_macsec.h | 4 +++- 2 files changed, 16 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index c6385617bfb2..92eaab95ae2b 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -85,7 +85,7 @@ struct gcm_iv { * @tfm: crypto struct, key storage */ struct macsec_key { - u64 id; + u8 id[MACSEC_KEYID_LEN]; struct crypto_aead *tfm; }; @@ -1529,7 +1529,8 @@ static const struct nla_policy macsec_genl_sa_policy[NUM_MACSEC_SA_ATTR] = { [MACSEC_SA_ATTR_AN] = { .type = NLA_U8 }, [MACSEC_SA_ATTR_ACTIVE] = { .type = NLA_U8 }, [MACSEC_SA_ATTR_PN] = { .type = NLA_U32 }, - [MACSEC_SA_ATTR_KEYID] = { .type = NLA_U64 }, + [MACSEC_SA_ATTR_KEYID] = { .type = NLA_BINARY, + .len = MACSEC_KEYID_LEN, }, [MACSEC_SA_ATTR_KEY] = { .type = NLA_BINARY, .len = MACSEC_MAX_KEY_LEN, }, }; @@ -1576,6 +1577,9 @@ static bool validate_add_rxsa(struct nlattr **attrs) return false; } + if (nla_len(attrs[MACSEC_SA_ATTR_KEYID]) != MACSEC_KEYID_LEN) + return false; + return true; } @@ -1641,7 +1645,7 @@ static int macsec_add_rxsa(struct sk_buff *skb, struct genl_info *info) if (tb_sa[MACSEC_SA_ATTR_ACTIVE]) rx_sa->active = !!nla_get_u8(tb_sa[MACSEC_SA_ATTR_ACTIVE]); - rx_sa->key.id = nla_get_u64(tb_sa[MACSEC_SA_ATTR_KEYID]); + nla_memcpy(rx_sa->key.id, tb_sa[MACSEC_SA_ATTR_KEY], MACSEC_KEYID_LEN); rx_sa->sc = rx_sc; rcu_assign_pointer(rx_sc->sa[assoc_num], rx_sa); @@ -1722,6 +1726,9 @@ static bool validate_add_txsa(struct nlattr **attrs) return false; } + if (nla_len(attrs[MACSEC_SA_ATTR_KEYID]) != MACSEC_KEYID_LEN) + return false; + return true; } @@ -1777,7 +1784,7 @@ static int macsec_add_txsa(struct sk_buff *skb, struct genl_info *info) return -ENOMEM; } - tx_sa->key.id = nla_get_u64(tb_sa[MACSEC_SA_ATTR_KEYID]); + nla_memcpy(tx_sa->key.id, tb_sa[MACSEC_SA_ATTR_KEY], MACSEC_KEYID_LEN); spin_lock_bh(&tx_sa->lock); tx_sa->next_pn = nla_get_u32(tb_sa[MACSEC_SA_ATTR_PN]); @@ -2318,7 +2325,7 @@ static int dump_secy(struct macsec_secy *secy, struct net_device *dev, if (nla_put_u8(skb, MACSEC_SA_ATTR_AN, i) || nla_put_u32(skb, MACSEC_SA_ATTR_PN, tx_sa->next_pn) || - nla_put_u64(skb, MACSEC_SA_ATTR_KEYID, tx_sa->key.id) || + nla_put(skb, MACSEC_SA_ATTR_KEYID, MACSEC_KEYID_LEN, tx_sa->key.id) || nla_put_u8(skb, MACSEC_SA_ATTR_ACTIVE, tx_sa->active)) { nla_nest_cancel(skb, txsa_nest); nla_nest_cancel(skb, txsa_list); @@ -2419,7 +2426,7 @@ static int dump_secy(struct macsec_secy *secy, struct net_device *dev, if (nla_put_u8(skb, MACSEC_SA_ATTR_AN, i) || nla_put_u32(skb, MACSEC_SA_ATTR_PN, rx_sa->next_pn) || - nla_put_u64(skb, MACSEC_SA_ATTR_KEYID, rx_sa->key.id) || + nla_put(skb, MACSEC_SA_ATTR_KEYID, MACSEC_KEYID_LEN, rx_sa->key.id) || nla_put_u8(skb, MACSEC_SA_ATTR_ACTIVE, rx_sa->active)) { nla_nest_cancel(skb, rxsa_nest); nla_nest_cancel(skb, rxsc_nest); diff --git a/include/uapi/linux/if_macsec.h b/include/uapi/linux/if_macsec.h index 4c58d9917aa4..3411ed06b9c0 100644 --- a/include/uapi/linux/if_macsec.h +++ b/include/uapi/linux/if_macsec.h @@ -19,6 +19,8 @@ #define MACSEC_MAX_KEY_LEN 128 +#define MACSEC_KEYID_LEN 16 + #define MACSEC_DEFAULT_CIPHER_ID 0x0080020001000001ULL #define MACSEC_DEFAULT_CIPHER_ALT 0x0080C20001000001ULL @@ -77,7 +79,7 @@ enum macsec_sa_attrs { MACSEC_SA_ATTR_ACTIVE, /* config/dump, u8 0..1 */ MACSEC_SA_ATTR_PN, /* config/dump, u32 */ MACSEC_SA_ATTR_KEY, /* config, data */ - MACSEC_SA_ATTR_KEYID, /* config/dump, u64 */ + MACSEC_SA_ATTR_KEYID, /* config/dump, 128-bit */ MACSEC_SA_ATTR_STATS, /* dump, nested, macsec_sa_stats_attr */ __MACSEC_SA_ATTR_END, NUM_MACSEC_SA_ATTR = __MACSEC_SA_ATTR_END, -- cgit v1.2.3 From 4f41fc59620fcedaa97cbdf3d7d2956d80fcd922 Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Mon, 9 May 2016 09:59:55 -0500 Subject: cgroup, kernfs: make mountinfo show properly scoped path for cgroup namespaces Patch summary: When showing a cgroupfs entry in mountinfo, show the path of the mount root dentry relative to the reader's cgroup namespace root. Short explanation (courtesy of mkerrisk): If we create a new cgroup namespace, then we want both /proc/self/cgroup and /proc/self/mountinfo to show cgroup paths that are correctly virtualized with respect to the cgroup mount point. Previous to this patch, /proc/self/cgroup shows the right info, but /proc/self/mountinfo does not. Long version: When a uid 0 task which is in freezer cgroup /a/b, unshares a new cgroup namespace, and then mounts a new instance of the freezer cgroup, the new mount will be rooted at /a/b. The root dentry field of the mountinfo entry will show '/a/b'. cat > /tmp/do1 << EOF mount -t cgroup -o freezer freezer /mnt grep freezer /proc/self/mountinfo EOF unshare -Gm bash /tmp/do1 > 330 160 0:34 / /sys/fs/cgroup/freezer rw,nosuid,nodev,noexec,relatime - cgroup cgroup rw,freezer > 355 133 0:34 /a/b /mnt rw,relatime - cgroup freezer rw,freezer The task's freezer cgroup entry in /proc/self/cgroup will simply show '/': grep freezer /proc/self/cgroup 9:freezer:/ If instead the same task simply bind mounts the /a/b cgroup directory, the resulting mountinfo entry will again show /a/b for the dentry root. However in this case the task will find its own cgroup at /mnt/a/b, not at /mnt: mount --bind /sys/fs/cgroup/freezer/a/b /mnt 130 25 0:34 /a/b /mnt rw,nosuid,nodev,noexec,relatime shared:21 - cgroup cgroup rw,freezer In other words, there is no way for the task to know, based on what is in mountinfo, which cgroup directory is its own. Example (by mkerrisk): First, a little script to save some typing and verbiage: echo -e "\t/proc/self/cgroup:\t$(cat /proc/self/cgroup | grep freezer)" cat /proc/self/mountinfo | grep freezer | awk '{print "\tmountinfo:\t\t" $4 "\t" $5}' Create cgroup, place this shell into the cgroup, and look at the state of the /proc files: 2653 2653 # Our shell 14254 # cat(1) /proc/self/cgroup: 10:freezer:/a/b mountinfo: / /sys/fs/cgroup/freezer Create a shell in new cgroup and mount namespaces. The act of creating a new cgroup namespace causes the process's current cgroups directories to become its cgroup root directories. (Here, I'm using my own version of the "unshare" utility, which takes the same options as the util-linux version): Look at the state of the /proc files: /proc/self/cgroup: 10:freezer:/ mountinfo: / /sys/fs/cgroup/freezer The third entry in /proc/self/cgroup (the pathname of the cgroup inside the hierarchy) is correctly virtualized w.r.t. the cgroup namespace, which is rooted at /a/b in the outer namespace. However, the info in /proc/self/mountinfo is not for this cgroup namespace, since we are seeing a duplicate of the mount from the old mount namespace, and the info there does not correspond to the new cgroup namespace. However, trying to create a new mount still doesn't show us the right information in mountinfo: # propagating to other mountns /proc/self/cgroup: 7:freezer:/ mountinfo: /a/b /mnt/freezer The act of creating a new cgroup namespace caused the process's current freezer directory, "/a/b", to become its cgroup freezer root directory. In other words, the pathname directory of the directory within the newly mounted cgroup filesystem should be "/", but mountinfo wrongly shows us "/a/b". The consequence of this is that the process in the cgroup namespace cannot correctly construct the pathname of its cgroup root directory from the information in /proc/PID/mountinfo. With this patch, the dentry root field in mountinfo is shown relative to the reader's cgroup namespace. So the same steps as above: /proc/self/cgroup: 10:freezer:/a/b mountinfo: / /sys/fs/cgroup/freezer /proc/self/cgroup: 10:freezer:/ mountinfo: /../.. /sys/fs/cgroup/freezer /proc/self/cgroup: 10:freezer:/ mountinfo: / /mnt/freezer cgroup.clone_children freezer.parent_freezing freezer.state tasks cgroup.procs freezer.self_freezing notify_on_release 3164 2653 # First shell that placed in this cgroup 3164 # Shell started by 'unshare' 14197 # cat(1) Signed-off-by: Serge Hallyn Tested-by: Michael Kerrisk Acked-by: Michael Kerrisk Signed-off-by: Tejun Heo --- fs/kernfs/mount.c | 14 +++++++++++ include/linux/kernfs.h | 2 ++ kernel/cgroup.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 79 insertions(+) (limited to 'include') diff --git a/fs/kernfs/mount.c b/fs/kernfs/mount.c index f73541fbe7af..3b78724c1979 100644 --- a/fs/kernfs/mount.c +++ b/fs/kernfs/mount.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "kernfs-internal.h" @@ -40,6 +41,18 @@ static int kernfs_sop_show_options(struct seq_file *sf, struct dentry *dentry) return 0; } +static int kernfs_sop_show_path(struct seq_file *sf, struct dentry *dentry) +{ + struct kernfs_node *node = dentry->d_fsdata; + struct kernfs_root *root = kernfs_root(node); + struct kernfs_syscall_ops *scops = root->syscall_ops; + + if (scops && scops->show_path) + return scops->show_path(sf, node, root); + + return seq_dentry(sf, dentry, " \t\n\\"); +} + const struct super_operations kernfs_sops = { .statfs = simple_statfs, .drop_inode = generic_delete_inode, @@ -47,6 +60,7 @@ const struct super_operations kernfs_sops = { .remount_fs = kernfs_sop_remount_fs, .show_options = kernfs_sop_show_options, + .show_path = kernfs_sop_show_path, }; /** diff --git a/include/linux/kernfs.h b/include/linux/kernfs.h index c06c44242f39..30f089ebe0a4 100644 --- a/include/linux/kernfs.h +++ b/include/linux/kernfs.h @@ -152,6 +152,8 @@ struct kernfs_syscall_ops { int (*rmdir)(struct kernfs_node *kn); int (*rename)(struct kernfs_node *kn, struct kernfs_node *new_parent, const char *new_name); + int (*show_path)(struct seq_file *sf, struct kernfs_node *kn, + struct kernfs_root *root); }; struct kernfs_root { diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 909a7d31ffd3..afea39eb7649 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1215,6 +1215,41 @@ static void cgroup_destroy_root(struct cgroup_root *root) cgroup_free_root(root); } +/* + * look up cgroup associated with current task's cgroup namespace on the + * specified hierarchy + */ +static struct cgroup * +current_cgns_cgroup_from_root(struct cgroup_root *root) +{ + struct cgroup *res = NULL; + struct css_set *cset; + + lockdep_assert_held(&css_set_lock); + + rcu_read_lock(); + + cset = current->nsproxy->cgroup_ns->root_cset; + if (cset == &init_css_set) { + res = &root->cgrp; + } else { + struct cgrp_cset_link *link; + + list_for_each_entry(link, &cset->cgrp_links, cgrp_link) { + struct cgroup *c = link->cgrp; + + if (c->root == root) { + res = c; + break; + } + } + } + rcu_read_unlock(); + + BUG_ON(!res); + return res; +} + /* look up cgroup associated with given css_set on the specified hierarchy */ static struct cgroup *cset_cgroup_from_root(struct css_set *cset, struct cgroup_root *root) @@ -1593,6 +1628,33 @@ static int rebind_subsystems(struct cgroup_root *dst_root, u16 ss_mask) return 0; } +static int cgroup_show_path(struct seq_file *sf, struct kernfs_node *kf_node, + struct kernfs_root *kf_root) +{ + int len = 0, ret = 0; + char *buf = NULL; + struct cgroup_root *kf_cgroot = cgroup_root_from_kf(kf_root); + struct cgroup *ns_cgroup; + + buf = kmalloc(PATH_MAX, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + spin_lock_bh(&css_set_lock); + ns_cgroup = current_cgns_cgroup_from_root(kf_cgroot); + len = kernfs_path_from_node(kf_node, ns_cgroup->kn, buf, PATH_MAX); + spin_unlock_bh(&css_set_lock); + + if (len >= PATH_MAX) + len = -ERANGE; + else if (len > 0) { + seq_escape(sf, buf, " \t\n\\"); + len = 0; + } + kfree(buf); + return len; +} + static int cgroup_show_options(struct seq_file *seq, struct kernfs_root *kf_root) { @@ -5433,6 +5495,7 @@ static struct kernfs_syscall_ops cgroup_kf_syscall_ops = { .mkdir = cgroup_mkdir, .rmdir = cgroup_rmdir, .rename = cgroup_rename, + .show_path = cgroup_show_path, }; static void __init cgroup_init_subsys(struct cgroup_subsys *ss, bool early) -- cgit v1.2.3 From 8634de6d254462e6953b7dac772a1df4f44c8030 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Fri, 6 May 2016 09:22:25 -0500 Subject: compiler-gcc: require gcc 4.8 for powerpc __builtin_bswap16() gcc support for __builtin_bswap16() was supposedly added for powerpc in gcc 4.6, and was then later added for other architectures in gcc 4.8. However, Stephen Rothwell reported that attempting to use it on powerpc in gcc 4.6 fails with: lib/vsprintf.c:160:2: error: initializer element is not constant lib/vsprintf.c:160:2: error: (near initialization for 'decpair[0]') lib/vsprintf.c:160:2: error: initializer element is not constant lib/vsprintf.c:160:2: error: (near initialization for 'decpair[1]') ... I'm not entirely sure what those errors mean, but I don't see them on gcc 4.8. So let's consider gcc 4.8 to be the official starting point for __builtin_bswap16(). Arnd Bergmann adds: "I found the commit in gcc-4.8 that replaced the powerpc-specific implementation of __builtin_bswap16 with an architecture-independent one. Apparently the powerpc version (gcc-4.6 and 4.7) just mapped to the lhbrx/sthbrx instructions, so it ended up not being a constant, though the intent of the patch was mainly to add support for the builtin to x86: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=52624 has the patch that went into gcc-4.8 and more information." Fixes: 7322dd755e7d ("byteswap: try to avoid __builtin_constant_p gcc bug") Reported-by: Stephen Rothwell Tested-by: Stephen Rothwell Acked-by: Arnd Bergmann Signed-off-by: Josh Poimboeuf Signed-off-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- include/linux/compiler-gcc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index eeae401a2412..3d5202eda22f 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -246,7 +246,7 @@ #define __HAVE_BUILTIN_BSWAP32__ #define __HAVE_BUILTIN_BSWAP64__ #endif -#if GCC_VERSION >= 40800 || (defined(__powerpc__) && GCC_VERSION >= 40600) +#if GCC_VERSION >= 40800 #define __HAVE_BUILTIN_BSWAP16__ #endif #endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ -- cgit v1.2.3 From 4a91cb61bb995e5571098188092e296192309c77 Mon Sep 17 00:00:00 2001 From: Mikko Rapeli Date: Sun, 24 Apr 2016 17:45:00 +0200 Subject: uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit glibc's net/if.h contains copies of definitions from linux/if.h and these conflict and cause build failures if both files are included by application source code. Changes in uapi headers, which fixed header file dependencies to include linux/if.h when it was needed, e.g. commit 1ffad83d, made the net/if.h and linux/if.h incompatibilities visible as build failures for userspace applications like iproute2 and xtables-addons. This patch fixes compile errors when glibc net/if.h is included before linux/if.h: ./linux/if.h:99:21: error: redeclaration of enumerator ‘IFF_NOARP’ ./linux/if.h:98:23: error: redeclaration of enumerator ‘IFF_RUNNING’ ./linux/if.h:97:26: error: redeclaration of enumerator ‘IFF_NOTRAILERS’ ./linux/if.h:96:27: error: redeclaration of enumerator ‘IFF_POINTOPOINT’ ./linux/if.h:95:24: error: redeclaration of enumerator ‘IFF_LOOPBACK’ ./linux/if.h:94:21: error: redeclaration of enumerator ‘IFF_DEBUG’ ./linux/if.h:93:25: error: redeclaration of enumerator ‘IFF_BROADCAST’ ./linux/if.h:92:19: error: redeclaration of enumerator ‘IFF_UP’ ./linux/if.h:252:8: error: redefinition of ‘struct ifconf’ ./linux/if.h:203:8: error: redefinition of ‘struct ifreq’ ./linux/if.h:169:8: error: redefinition of ‘struct ifmap’ ./linux/if.h:107:23: error: redeclaration of enumerator ‘IFF_DYNAMIC’ ./linux/if.h:106:25: error: redeclaration of enumerator ‘IFF_AUTOMEDIA’ ./linux/if.h:105:23: error: redeclaration of enumerator ‘IFF_PORTSEL’ ./linux/if.h:104:25: error: redeclaration of enumerator ‘IFF_MULTICAST’ ./linux/if.h:103:21: error: redeclaration of enumerator ‘IFF_SLAVE’ ./linux/if.h:102:22: error: redeclaration of enumerator ‘IFF_MASTER’ ./linux/if.h:101:24: error: redeclaration of enumerator ‘IFF_ALLMULTI’ ./linux/if.h:100:23: error: redeclaration of enumerator ‘IFF_PROMISC’ The cases where linux/if.h is included before net/if.h need a similar fix in the glibc side, or the order of include files can be changed userspace code as a workaround. This change was tested in x86 userspace on Debian unstable with scripts/headers_compile_test.sh: $ make headers_install && \ cd usr/include && ../../scripts/headers_compile_test.sh -l -k ... cc -Wall -c -nostdinc -I /usr/lib/gcc/i586-linux-gnu/5/include -I /usr/lib/gcc/i586-linux-gnu/5/include-fixed -I . -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH/i586-linux-gnu -o /dev/null ./linux/if.h_libc_before_kernel.h PASSED libc before kernel test: ./linux/if.h Reported-by: Jan Engelhardt Reported-by: Josh Boyer Reported-by: Stephen Hemminger Reported-by: Waldemar Brodkorb Cc: Gabriel Laskar Signed-off-by: Mikko Rapeli Signed-off-by: David S. Miller --- include/uapi/linux/if.h | 28 +++++++++++++++++++++++++ include/uapi/linux/libc-compat.h | 44 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 72 insertions(+) (limited to 'include') diff --git a/include/uapi/linux/if.h b/include/uapi/linux/if.h index f80277569f24..e601c8c3bdc7 100644 --- a/include/uapi/linux/if.h +++ b/include/uapi/linux/if.h @@ -19,14 +19,20 @@ #ifndef _LINUX_IF_H #define _LINUX_IF_H +#include /* for compatibility with glibc */ #include /* for "__kernel_caddr_t" et al */ #include /* for "struct sockaddr" et al */ #include /* for "__user" et al */ +#if __UAPI_DEF_IF_IFNAMSIZ #define IFNAMSIZ 16 +#endif /* __UAPI_DEF_IF_IFNAMSIZ */ #define IFALIASZ 256 #include +/* For glibc compatibility. An empty enum does not compile. */ +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 && \ + __UAPI_DEF_IF_NET_DEVICE_FLAGS != 0 /** * enum net_device_flags - &struct net_device flags * @@ -68,6 +74,8 @@ * @IFF_ECHO: echo sent packets. Volatile. */ enum net_device_flags { +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS IFF_UP = 1<<0, /* sysfs */ IFF_BROADCAST = 1<<1, /* volatile */ IFF_DEBUG = 1<<2, /* sysfs */ @@ -84,11 +92,17 @@ enum net_device_flags { IFF_PORTSEL = 1<<13, /* sysfs */ IFF_AUTOMEDIA = 1<<14, /* sysfs */ IFF_DYNAMIC = 1<<15, /* sysfs */ +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS */ +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO IFF_LOWER_UP = 1<<16, /* volatile */ IFF_DORMANT = 1<<17, /* volatile */ IFF_ECHO = 1<<18, /* volatile */ +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */ }; +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 && __UAPI_DEF_IF_NET_DEVICE_FLAGS != 0 */ +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS #define IFF_UP IFF_UP #define IFF_BROADCAST IFF_BROADCAST #define IFF_DEBUG IFF_DEBUG @@ -105,9 +119,13 @@ enum net_device_flags { #define IFF_PORTSEL IFF_PORTSEL #define IFF_AUTOMEDIA IFF_AUTOMEDIA #define IFF_DYNAMIC IFF_DYNAMIC +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS */ + +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO #define IFF_LOWER_UP IFF_LOWER_UP #define IFF_DORMANT IFF_DORMANT #define IFF_ECHO IFF_ECHO +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */ #define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\ IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT) @@ -166,6 +184,8 @@ enum { * being very small might be worth keeping for clean configuration. */ +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_IFMAP struct ifmap { unsigned long mem_start; unsigned long mem_end; @@ -175,6 +195,7 @@ struct ifmap { unsigned char port; /* 3 bytes spare */ }; +#endif /* __UAPI_DEF_IF_IFMAP */ struct if_settings { unsigned int type; /* Type of physical device or protocol */ @@ -200,6 +221,8 @@ struct if_settings { * remainder may be interface specific. */ +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_IFREQ struct ifreq { #define IFHWADDRLEN 6 union @@ -223,6 +246,7 @@ struct ifreq { struct if_settings ifru_settings; } ifr_ifru; }; +#endif /* __UAPI_DEF_IF_IFREQ */ #define ifr_name ifr_ifrn.ifrn_name /* interface name */ #define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */ @@ -249,6 +273,8 @@ struct ifreq { * must know all networks accessible). */ +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_IFCONF struct ifconf { int ifc_len; /* size of buffer */ union { @@ -256,6 +282,8 @@ struct ifconf { struct ifreq __user *ifcu_req; } ifc_ifcu; }; +#endif /* __UAPI_DEF_IF_IFCONF */ + #define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */ #define ifc_req ifc_ifcu.ifcu_req /* array of structures */ diff --git a/include/uapi/linux/libc-compat.h b/include/uapi/linux/libc-compat.h index 7d024ceb075d..d5e38c73377c 100644 --- a/include/uapi/linux/libc-compat.h +++ b/include/uapi/linux/libc-compat.h @@ -51,6 +51,40 @@ /* We have included glibc headers... */ #if defined(__GLIBC__) +/* Coordinate with glibc net/if.h header. */ +#if defined(_NET_IF_H) + +/* GLIBC headers included first so don't define anything + * that would already be defined. */ + +#define __UAPI_DEF_IF_IFCONF 0 +#define __UAPI_DEF_IF_IFMAP 0 +#define __UAPI_DEF_IF_IFNAMSIZ 0 +#define __UAPI_DEF_IF_IFREQ 0 +/* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */ +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS 0 +/* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */ +#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1 +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */ + +#else /* _NET_IF_H */ + +/* Linux headers included first, and we must define everything + * we need. The expectation is that glibc will check the + * __UAPI_DEF_* defines and adjust appropriately. */ + +#define __UAPI_DEF_IF_IFCONF 1 +#define __UAPI_DEF_IF_IFMAP 1 +#define __UAPI_DEF_IF_IFNAMSIZ 1 +#define __UAPI_DEF_IF_IFREQ 1 +/* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */ +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS 1 +/* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */ +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1 + +#endif /* _NET_IF_H */ + /* Coordinate with glibc netinet/in.h header. */ #if defined(_NETINET_IN_H) @@ -117,6 +151,16 @@ * that we need. */ #else /* !defined(__GLIBC__) */ +/* Definitions for if.h */ +#define __UAPI_DEF_IF_IFCONF 1 +#define __UAPI_DEF_IF_IFMAP 1 +#define __UAPI_DEF_IF_IFNAMSIZ 1 +#define __UAPI_DEF_IF_IFREQ 1 +/* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */ +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS 1 +/* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */ +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1 + /* Definitions for in.h */ #define __UAPI_DEF_IN_ADDR 1 #define __UAPI_DEF_IN_IPPROTO 1 -- cgit v1.2.3 From d99079e2fbd5ac38884f498ca99435d525152a88 Mon Sep 17 00:00:00 2001 From: Jamal Hadi Salim Date: Mon, 9 May 2016 08:05:06 -0400 Subject: export tc ife uapi header Signed-off-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- include/uapi/linux/tc_act/Kbuild | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/uapi/linux/tc_act/Kbuild b/include/uapi/linux/tc_act/Kbuild index 242cf0c6e33d..e3969bd939e4 100644 --- a/include/uapi/linux/tc_act/Kbuild +++ b/include/uapi/linux/tc_act/Kbuild @@ -10,3 +10,4 @@ header-y += tc_skbedit.h header-y += tc_vlan.h header-y += tc_bpf.h header-y += tc_connmark.h +header-y += tc_ife.h -- cgit v1.2.3 From 54d5ca871e72f2bb172ec9323497f01cd5091ec7 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 11 May 2016 01:16:37 +0200 Subject: vfs: add vfs_select_inode() helper Signed-off-by: Miklos Szeredi Cc: # v4.2+ --- fs/open.c | 12 ++++-------- include/linux/dcache.h | 12 ++++++++++++ 2 files changed, 16 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/fs/open.c b/fs/open.c index 17cb6b1dab75..081d3d6df74b 100644 --- a/fs/open.c +++ b/fs/open.c @@ -840,16 +840,12 @@ EXPORT_SYMBOL(file_path); int vfs_open(const struct path *path, struct file *file, const struct cred *cred) { - struct dentry *dentry = path->dentry; - struct inode *inode = dentry->d_inode; + struct inode *inode = vfs_select_inode(path->dentry, file->f_flags); - file->f_path = *path; - if (dentry->d_flags & DCACHE_OP_SELECT_INODE) { - inode = dentry->d_op->d_select_inode(dentry, file->f_flags); - if (IS_ERR(inode)) - return PTR_ERR(inode); - } + if (IS_ERR(inode)) + return PTR_ERR(inode); + file->f_path = *path; return do_dentry_open(file, inode, NULL, cred); } diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 4bb4de8d95ea..7e9422cb5989 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -565,4 +565,16 @@ static inline struct dentry *d_real(struct dentry *dentry) return dentry; } +static inline struct inode *vfs_select_inode(struct dentry *dentry, + unsigned open_flags) +{ + struct inode *inode = d_inode(dentry); + + if (inode && unlikely(dentry->d_flags & DCACHE_OP_SELECT_INODE)) + inode = dentry->d_op->d_select_inode(dentry, open_flags); + + return inode; +} + + #endif /* __LINUX_DCACHE_H */ -- cgit v1.2.3 From 3c9fe8cdff1b889a059a30d22f130372f2b3885f Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 11 May 2016 01:16:37 +0200 Subject: vfs: add lookup_hash() helper Overlayfs needs lookup without inode_permission() and already has the name hash (in form of dentry->d_name on overlayfs dentry). It also doesn't support filesystems with d_op->d_hash() so basically it only needs the actual hashed lookup from lookup_one_len_unlocked() So add a new helper that does unlocked lookup of a hashed name. Signed-off-by: Miklos Szeredi --- fs/namei.c | 33 ++++++++++++++++++++++++++++----- include/linux/namei.h | 2 ++ 2 files changed, 30 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/fs/namei.c b/fs/namei.c index 3ef87d673bbe..1a1ea79a7ba0 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -2266,6 +2266,33 @@ int vfs_path_lookup(struct dentry *dentry, struct vfsmount *mnt, } EXPORT_SYMBOL(vfs_path_lookup); +/** + * lookup_hash - lookup single pathname component on already hashed name + * @name: name and hash to lookup + * @base: base directory to lookup from + * + * The name must have been verified and hashed (see lookup_one_len()). Using + * this after just full_name_hash() is unsafe. + * + * This function also doesn't check for search permission on base directory. + * + * Use lookup_one_len_unlocked() instead, unless you really know what you are + * doing. + * + * Do not hold i_mutex; this helper takes i_mutex if necessary. + */ +struct dentry *lookup_hash(const struct qstr *name, struct dentry *base) +{ + struct dentry *ret; + + ret = lookup_dcache(name, base, 0); + if (!ret) + ret = lookup_slow(name, base, 0); + + return ret; +} +EXPORT_SYMBOL(lookup_hash); + /** * lookup_one_len - filesystem helper to lookup single pathname component * @name: pathname component to lookup @@ -2337,7 +2364,6 @@ struct dentry *lookup_one_len_unlocked(const char *name, struct qstr this; unsigned int c; int err; - struct dentry *ret; this.name = name; this.len = len; @@ -2369,10 +2395,7 @@ struct dentry *lookup_one_len_unlocked(const char *name, if (err) return ERR_PTR(err); - ret = lookup_dcache(&this, base, 0); - if (!ret) - ret = lookup_slow(&this, base, 0); - return ret; + return lookup_hash(&this, base); } EXPORT_SYMBOL(lookup_one_len_unlocked); diff --git a/include/linux/namei.h b/include/linux/namei.h index 77d01700daf7..ec5ec2818a28 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -79,6 +79,8 @@ extern int kern_path_mountpoint(int, const char *, struct path *, unsigned int); extern struct dentry *lookup_one_len(const char *, struct dentry *, int); extern struct dentry *lookup_one_len_unlocked(const char *, struct dentry *, int); +struct qstr; +extern struct dentry *lookup_hash(const struct qstr *, struct dentry *); extern int follow_down_one(struct path *); extern int follow_down(struct path *); -- cgit v1.2.3 From 6d0a07edd17cfc12fdc1f36de8072fa17cc3666f Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Thu, 12 May 2016 15:42:25 -0700 Subject: mm: thp: calculate the mapcount correctly for THP pages during WP faults This will provide fully accuracy to the mapcount calculation in the write protect faults, so page pinning will not get broken by false positive copy-on-writes. total_mapcount() isn't the right calculation needed in reuse_swap_page(), so this introduces a page_trans_huge_mapcount() that is effectively the full accurate return value for page_mapcount() if dealing with Transparent Hugepages, however we only use the page_trans_huge_mapcount() during COW faults where it strictly needed, due to its higher runtime cost. This also provide at practical zero cost the total_mapcount information which is needed to know if we can still relocate the page anon_vma to the local vma. If page_trans_huge_mapcount() returns 1 we can reuse the page no matter if it's a pte or a pmd_trans_huge triggering the fault, but we can only relocate the page anon_vma to the local vma->anon_vma if we're sure it's only this "vma" mapping the whole THP physical range. Kirill A. Shutemov discovered the problem with moving the page anon_vma to the local vma->anon_vma in a previous version of this patch and another problem in the way page_move_anon_rmap() was called. Andrew Morton discovered that CONFIG_SWAP=n wouldn't build in a previous version, because reuse_swap_page must be a macro to call page_trans_huge_mapcount from swap.h, so this uses a macro again instead of an inline function. With this change at least it's a less dangerous usage than it was before, because "page" is used only once now, while with the previous code reuse_swap_page(page++) would have called page_mapcount on page+1 and it would have increased page twice instead of just once. Dean Luick noticed an uninitialized variable that could result in a rmap inefficiency for the non-THP case in a previous version. Mike Marciniszyn said: : Our RDMA tests are seeing an issue with memory locking that bisects to : commit 61f5d698cc97 ("mm: re-enable THP") : : The test program registers two rather large MRs (512M) and RDMA : writes data to a passive peer using the first and RDMA reads it back : into the second MR and compares that data. The sizes are chosen randomly : between 0 and 1024 bytes. : : The test will get through a few (<= 4 iterations) and then gets a : compare error. : : Tracing indicates the kernel logical addresses associated with the individual : pages at registration ARE correct , the data in the "RDMA read response only" : packets ARE correct. : : The "corruption" occurs when the packet crosse two pages that are not physically : contiguous. The second page reads back as zero in the program. : : It looks like the user VA at the point of the compare error no longer points to : the same physical address as was registered. : : This patch totally resolves the issue! Link: http://lkml.kernel.org/r/1462547040-1737-2-git-send-email-aarcange@redhat.com Signed-off-by: Andrea Arcangeli Reviewed-by: "Kirill A. Shutemov" Reviewed-by: Dean Luick Tested-by: Alex Williamson Tested-by: Mike Marciniszyn Tested-by: Josh Collier Cc: Marc Haber Cc: [4.5] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 9 +++++++ include/linux/swap.h | 6 ++--- mm/huge_memory.c | 71 +++++++++++++++++++++++++++++++++++++++++++++------- mm/memory.c | 22 ++++++++++------ mm/swapfile.c | 13 +++++----- 5 files changed, 95 insertions(+), 26 deletions(-) (limited to 'include') diff --git a/include/linux/mm.h b/include/linux/mm.h index 864d7221de84..8f468e0d2534 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -500,11 +500,20 @@ static inline int page_mapcount(struct page *page) #ifdef CONFIG_TRANSPARENT_HUGEPAGE int total_mapcount(struct page *page); +int page_trans_huge_mapcount(struct page *page, int *total_mapcount); #else static inline int total_mapcount(struct page *page) { return page_mapcount(page); } +static inline int page_trans_huge_mapcount(struct page *page, + int *total_mapcount) +{ + int mapcount = page_mapcount(page); + if (total_mapcount) + *total_mapcount = mapcount; + return mapcount; +} #endif static inline struct page *virt_to_head_page(const void *x) diff --git a/include/linux/swap.h b/include/linux/swap.h index 0a4cd4703f40..ad220359f1b0 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -418,7 +418,7 @@ extern sector_t swapdev_block(int, pgoff_t); extern int page_swapcount(struct page *); extern int swp_swapcount(swp_entry_t entry); extern struct swap_info_struct *page_swap_info(struct page *); -extern int reuse_swap_page(struct page *); +extern bool reuse_swap_page(struct page *, int *); extern int try_to_free_swap(struct page *); struct backing_dev_info; @@ -513,8 +513,8 @@ static inline int swp_swapcount(swp_entry_t entry) return 0; } -#define reuse_swap_page(page) \ - (!PageTransCompound(page) && page_mapcount(page) == 1) +#define reuse_swap_page(page, total_mapcount) \ + (page_trans_huge_mapcount(page, total_mapcount) == 1) static inline int try_to_free_swap(struct page *page) { diff --git a/mm/huge_memory.c b/mm/huge_memory.c index f7daa7de8f48..b49ee126d4d1 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -1298,15 +1298,9 @@ int do_huge_pmd_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, VM_BUG_ON_PAGE(!PageCompound(page) || !PageHead(page), page); /* * We can only reuse the page if nobody else maps the huge page or it's - * part. We can do it by checking page_mapcount() on each sub-page, but - * it's expensive. - * The cheaper way is to check page_count() to be equal 1: every - * mapcount takes page reference reference, so this way we can - * guarantee, that the PMD is the only mapping. - * This can give false negative if somebody pinned the page, but that's - * fine. + * part. */ - if (page_mapcount(page) == 1 && page_count(page) == 1) { + if (page_trans_huge_mapcount(page, NULL) == 1) { pmd_t entry; entry = pmd_mkyoung(orig_pmd); entry = maybe_pmd_mkwrite(pmd_mkdirty(entry), vma); @@ -2079,7 +2073,8 @@ static int __collapse_huge_page_isolate(struct vm_area_struct *vma, if (pte_write(pteval)) { writable = true; } else { - if (PageSwapCache(page) && !reuse_swap_page(page)) { + if (PageSwapCache(page) && + !reuse_swap_page(page, NULL)) { unlock_page(page); result = SCAN_SWAP_CACHE_PAGE; goto out; @@ -3222,6 +3217,64 @@ int total_mapcount(struct page *page) return ret; } +/* + * This calculates accurately how many mappings a transparent hugepage + * has (unlike page_mapcount() which isn't fully accurate). This full + * accuracy is primarily needed to know if copy-on-write faults can + * reuse the page and change the mapping to read-write instead of + * copying them. At the same time this returns the total_mapcount too. + * + * The function returns the highest mapcount any one of the subpages + * has. If the return value is one, even if different processes are + * mapping different subpages of the transparent hugepage, they can + * all reuse it, because each process is reusing a different subpage. + * + * The total_mapcount is instead counting all virtual mappings of the + * subpages. If the total_mapcount is equal to "one", it tells the + * caller all mappings belong to the same "mm" and in turn the + * anon_vma of the transparent hugepage can become the vma->anon_vma + * local one as no other process may be mapping any of the subpages. + * + * It would be more accurate to replace page_mapcount() with + * page_trans_huge_mapcount(), however we only use + * page_trans_huge_mapcount() in the copy-on-write faults where we + * need full accuracy to avoid breaking page pinning, because + * page_trans_huge_mapcount() is slower than page_mapcount(). + */ +int page_trans_huge_mapcount(struct page *page, int *total_mapcount) +{ + int i, ret, _total_mapcount, mapcount; + + /* hugetlbfs shouldn't call it */ + VM_BUG_ON_PAGE(PageHuge(page), page); + + if (likely(!PageTransCompound(page))) { + mapcount = atomic_read(&page->_mapcount) + 1; + if (total_mapcount) + *total_mapcount = mapcount; + return mapcount; + } + + page = compound_head(page); + + _total_mapcount = ret = 0; + for (i = 0; i < HPAGE_PMD_NR; i++) { + mapcount = atomic_read(&page[i]._mapcount) + 1; + ret = max(ret, mapcount); + _total_mapcount += mapcount; + } + if (PageDoubleMap(page)) { + ret -= 1; + _total_mapcount -= HPAGE_PMD_NR; + } + mapcount = compound_mapcount(page); + ret += mapcount; + _total_mapcount += mapcount; + if (total_mapcount) + *total_mapcount = _total_mapcount; + return ret; +} + /* * This function splits huge page into normal pages. @page can point to any * subpage of huge page to split. Split doesn't change the position of @page. diff --git a/mm/memory.c b/mm/memory.c index 52c218e2b724..07493e34ab7e 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2373,6 +2373,7 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, * not dirty accountable. */ if (PageAnon(old_page) && !PageKsm(old_page)) { + int total_mapcount; if (!trylock_page(old_page)) { get_page(old_page); pte_unmap_unlock(page_table, ptl); @@ -2387,13 +2388,18 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, } put_page(old_page); } - if (reuse_swap_page(old_page)) { - /* - * The page is all ours. Move it to our anon_vma so - * the rmap code will not search our parent or siblings. - * Protected against the rmap code by the page lock. - */ - page_move_anon_rmap(old_page, vma, address); + if (reuse_swap_page(old_page, &total_mapcount)) { + if (total_mapcount == 1) { + /* + * The page is all ours. Move it to + * our anon_vma so the rmap code will + * not search our parent or siblings. + * Protected against the rmap code by + * the page lock. + */ + page_move_anon_rmap(compound_head(old_page), + vma, address); + } unlock_page(old_page); return wp_page_reuse(mm, vma, address, page_table, ptl, orig_pte, old_page, 0, 0); @@ -2617,7 +2623,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma, inc_mm_counter_fast(mm, MM_ANONPAGES); dec_mm_counter_fast(mm, MM_SWAPENTS); pte = mk_pte(page, vma->vm_page_prot); - if ((flags & FAULT_FLAG_WRITE) && reuse_swap_page(page)) { + if ((flags & FAULT_FLAG_WRITE) && reuse_swap_page(page, NULL)) { pte = maybe_mkwrite(pte_mkdirty(pte), vma); flags &= ~FAULT_FLAG_WRITE; ret |= VM_FAULT_WRITE; diff --git a/mm/swapfile.c b/mm/swapfile.c index 83874eced5bf..031713ab40ce 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -922,18 +922,19 @@ out: * to it. And as a side-effect, free up its swap: because the old content * on disk will never be read, and seeking back there to write new content * later would only waste time away from clustering. + * + * NOTE: total_mapcount should not be relied upon by the caller if + * reuse_swap_page() returns false, but it may be always overwritten + * (see the other implementation for CONFIG_SWAP=n). */ -int reuse_swap_page(struct page *page) +bool reuse_swap_page(struct page *page, int *total_mapcount) { int count; VM_BUG_ON_PAGE(!PageLocked(page), page); if (unlikely(PageKsm(page))) - return 0; - /* The page is part of THP and cannot be reused */ - if (PageTransCompound(page)) - return 0; - count = page_mapcount(page); + return false; + count = page_trans_huge_mapcount(page, total_mapcount); if (count <= 1 && PageSwapCache(page)) { count += page_swapcount(page); if (count == 1 && !PageWriteback(page)) { -- cgit v1.2.3 From 45c04704e467fffe3525205454d9627325dae308 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 18 May 2016 16:19:01 +0300 Subject: ASoC: twl6040: Disconnect AUX output pads on digital mute Disconnect also the path to AUXL from the HF path during digital_mute to avoid pop noise leakage to Line-out pads. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- include/linux/mfd/twl6040.h | 1 + sound/soc/codecs/twl6040.c | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index 8f9fc3d26e6d..8e95cd87cd74 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -134,6 +134,7 @@ #define TWL6040_HFDACENA (1 << 0) #define TWL6040_HFPGAENA (1 << 1) #define TWL6040_HFDRVENA (1 << 4) +#define TWL6040_HFSWENA (1 << 6) /* VIBCTLL/R (0x18/0x1A) fields */ diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c index bc3de2e844e6..d1e3a932cbf3 100644 --- a/sound/soc/codecs/twl6040.c +++ b/sound/soc/codecs/twl6040.c @@ -983,9 +983,9 @@ static void twl6040_mute_path(struct snd_soc_codec *codec, enum twl6040_dai_id i if (mute) { /* Power down drivers and DACs */ hflctl &= ~(TWL6040_HFDACENA | TWL6040_HFPGAENA | - TWL6040_HFDRVENA); + TWL6040_HFDRVENA | TWL6040_HFSWENA); hfrctl &= ~(TWL6040_HFDACENA | TWL6040_HFPGAENA | - TWL6040_HFDRVENA); + TWL6040_HFDRVENA | TWL6040_HFSWENA); } twl6040_reg_write(twl6040, TWL6040_REG_HFLCTL, hflctl); -- cgit v1.2.3