From cfd280c91253cc28e4919e349fa7a813b63e71e8 Mon Sep 17 00:00:00 2001 From: Carlos O'Donell Date: Thu, 15 Aug 2013 17:28:10 +0800 Subject: net: sync some IP headers with glibc Solution: ========= - Synchronize linux's `include/uapi/linux/in6.h' with glibc's `inet/netinet/in.h'. - Synchronize glibc's `inet/netinet/in.h with linux's `include/uapi/linux/in6.h'. - Allow including the headers in either other. - First header included defines the structures and macros. Details: ======== The kernel promises not to break the UAPI ABI so I don't see why we can't just have the two userspace headers coordinate? If you include the kernel headers first you get those, and if you include the glibc headers first you get those, and the following patch arranges a coordination and synchronization between the two. Let's handle `include/uapi/linux/in6.h' from linux, and `inet/netinet/in.h' from glibc and ensure they compile in any order and preserve the required ABI. These two patches pass the following compile tests: cat >> test1.c <> test2.c < Cc: Thomas Backlund Cc: libc-alpha@sourceware.org Cc: YOSHIFUJI Hideaki Cc: David S. Miller Tested-by: Cong Wang Signed-off-by: Carlos O'Donell Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- include/uapi/linux/Kbuild | 1 + include/uapi/linux/in.h | 49 ++++++++++++++----- include/uapi/linux/in6.h | 36 +++++++++++--- include/uapi/linux/libc-compat.h | 103 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 169 insertions(+), 20 deletions(-) create mode 100644 include/uapi/linux/libc-compat.h (limited to 'include') diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index 997f9f2f0963..e7c94eeb9475 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -227,6 +227,7 @@ header-y += kvm_para.h endif header-y += l2tp.h +header-y += libc-compat.h header-y += limits.h header-y += llc.h header-y += loop.h diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h index 9edb441df827..f9e8e496ae5d 100644 --- a/include/uapi/linux/in.h +++ b/include/uapi/linux/in.h @@ -24,30 +24,53 @@ /* Standard well-defined IP protocols. */ enum { IPPROTO_IP = 0, /* Dummy protocol for TCP */ +#define IPPROTO_IP IPPROTO_IP IPPROTO_ICMP = 1, /* Internet Control Message Protocol */ +#define IPPROTO_ICMP IPPROTO_ICMP IPPROTO_IGMP = 2, /* Internet Group Management Protocol */ +#define IPPROTO_IGMP IPPROTO_IGMP IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */ +#define IPPROTO_IPIP IPPROTO_IPIP IPPROTO_TCP = 6, /* Transmission Control Protocol */ +#define IPPROTO_TCP IPPROTO_TCP IPPROTO_EGP = 8, /* Exterior Gateway Protocol */ +#define IPPROTO_EGP IPPROTO_EGP IPPROTO_PUP = 12, /* PUP protocol */ +#define IPPROTO_PUP IPPROTO_PUP IPPROTO_UDP = 17, /* User Datagram Protocol */ +#define IPPROTO_UDP IPPROTO_UDP IPPROTO_IDP = 22, /* XNS IDP protocol */ +#define IPPROTO_IDP IPPROTO_IDP + IPPROTO_TP = 29, /* SO Transport Protocol Class 4 */ +#define IPPROTO_TP IPPROTO_TP IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */ - IPPROTO_RSVP = 46, /* RSVP protocol */ +#define IPPROTO_DCCP IPPROTO_DCCP + IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */ +#define IPPROTO_IPV6 IPPROTO_IPV6 + IPPROTO_RSVP = 46, /* RSVP Protocol */ +#define IPPROTO_RSVP IPPROTO_RSVP IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */ - - IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */ - - IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */ - IPPROTO_AH = 51, /* Authentication Header protocol */ - IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */ - IPPROTO_PIM = 103, /* Protocol Independent Multicast */ - - IPPROTO_COMP = 108, /* Compression Header protocol */ - IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ +#define IPPROTO_GRE IPPROTO_GRE + IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */ +#define IPPROTO_ESP IPPROTO_ESP + IPPROTO_AH = 51, /* Authentication Header protocol */ +#define IPPROTO_AH IPPROTO_AH + IPPROTO_MTP = 92, /* Multicast Transport Protocol */ +#define IPPROTO_MTP IPPROTO_MTP + IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */ +#define IPPROTO_BEETPH IPPROTO_BEETPH + IPPROTO_ENCAP = 98, /* Encapsulation Header */ +#define IPPROTO_ENCAP IPPROTO_ENCAP + IPPROTO_PIM = 103, /* Protocol Independent Multicast */ +#define IPPROTO_PIM IPPROTO_PIM + IPPROTO_COMP = 108, /* Compression Header Protocol */ +#define IPPROTO_COMP IPPROTO_COMP + IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ +#define IPPROTO_SCTP IPPROTO_SCTP IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */ - - IPPROTO_RAW = 255, /* Raw IP packets */ +#define IPPROTO_UDPLITE IPPROTO_UDPLITE + IPPROTO_RAW = 255, /* Raw IP packets */ +#define IPPROTO_RAW IPPROTO_RAW IPPROTO_MAX }; diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h index 53b1d56a6e7f..440d5c479145 100644 --- a/include/uapi/linux/in6.h +++ b/include/uapi/linux/in6.h @@ -22,22 +22,30 @@ #define _UAPI_LINUX_IN6_H #include +#include /* * IPv6 address structure */ +#if __UAPI_DEF_IN6_ADDR struct in6_addr { union { __u8 u6_addr8[16]; +#if __UAPI_DEF_IN6_ADDR_ALT __be16 u6_addr16[8]; __be32 u6_addr32[4]; +#endif } in6_u; #define s6_addr in6_u.u6_addr8 +#if __UAPI_DEF_IN6_ADDR_ALT #define s6_addr16 in6_u.u6_addr16 #define s6_addr32 in6_u.u6_addr32 +#endif }; +#endif /* __UAPI_DEF_IN6_ADDR */ +#if __UAPI_DEF_SOCKADDR_IN6 struct sockaddr_in6 { unsigned short int sin6_family; /* AF_INET6 */ __be16 sin6_port; /* Transport layer port # */ @@ -45,7 +53,9 @@ struct sockaddr_in6 { struct in6_addr sin6_addr; /* IPv6 address */ __u32 sin6_scope_id; /* scope id (new in RFC2553) */ }; +#endif /* __UAPI_DEF_SOCKADDR_IN6 */ +#if __UAPI_DEF_IPV6_MREQ struct ipv6_mreq { /* IPv6 multicast address of group */ struct in6_addr ipv6mr_multiaddr; @@ -53,6 +63,7 @@ struct ipv6_mreq { /* local IPv6 address of interface */ int ipv6mr_ifindex; }; +#endif /* __UAPI_DEF_IVP6_MREQ */ #define ipv6mr_acaddr ipv6mr_multiaddr @@ -114,13 +125,24 @@ struct in6_flowlabel_req { /* * IPV6 extension headers */ -#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */ -#define IPPROTO_ROUTING 43 /* IPv6 routing header */ -#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */ -#define IPPROTO_ICMPV6 58 /* ICMPv6 */ -#define IPPROTO_NONE 59 /* IPv6 no next header */ -#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */ -#define IPPROTO_MH 135 /* IPv6 mobility header */ +#if __UAPI_DEF_IPPROTO_V6 +enum { + IPPROTO_HOPOPTS = 0, /* IPv6 hop-by-hop options */ +#define IPPROTO_HOPOPTS IPPROTO_HOPOPTS + IPPROTO_ROUTING = 43, /* IPv6 routing header */ +#define IPPROTO_ROUTING IPPROTO_ROUTING + IPPROTO_FRAGMENT = 44, /* IPv6 fragmentation header */ +#define IPPROTO_FRAGMENT IPPROTO_FRAGMENT + IPPROTO_ICMPV6 = 58, /* ICMPv6 */ +#define IPPROTO_ICMPV6 IPPROTO_ICMPV6 + IPPROTO_NONE = 59, /* IPv6 no next header */ +#define IPPROTO_NONE IPPROTO_NONE + IPPROTO_DSTOPTS = 60, /* IPv6 destination options */ +#define IPPROTO_DSTOPTS IPPROTO_DSTOPTS + IPPROTO_MH = 135, /* IPv6 mobility header */ +#define IPPROTO_MH IPPROTO_MH +}; +#endif /* __UAPI_DEF_IPPROTO_V6 */ /* * IPv6 TLV options. diff --git a/include/uapi/linux/libc-compat.h b/include/uapi/linux/libc-compat.h new file mode 100644 index 000000000000..335e8a7cad39 --- /dev/null +++ b/include/uapi/linux/libc-compat.h @@ -0,0 +1,103 @@ +/* + * Compatibility interface for userspace libc header coordination: + * + * Define compatibility macros that are used to control the inclusion or + * exclusion of UAPI structures and definitions in coordination with another + * userspace C library. + * + * This header is intended to solve the problem of UAPI definitions that + * conflict with userspace definitions. If a UAPI header has such conflicting + * definitions then the solution is as follows: + * + * * Synchronize the UAPI header and the libc headers so either one can be + * used and such that the ABI is preserved. If this is not possible then + * no simple compatibility interface exists (you need to write translating + * wrappers and rename things) and you can't use this interface. + * + * Then follow this process: + * + * (a) Include libc-compat.h in the UAPI header. + * e.g. #include + * This include must be as early as possible. + * + * (b) In libc-compat.h add enough code to detect that the comflicting + * userspace libc header has been included first. + * + * (c) If the userspace libc header has been included first define a set of + * guard macros of the form __UAPI_DEF_FOO and set their values to 1, else + * set their values to 0. + * + * (d) Back in the UAPI header with the conflicting definitions, guard the + * definitions with: + * #if __UAPI_DEF_FOO + * ... + * #endif + * + * This fixes the situation where the linux headers are included *after* the + * libc headers. To fix the problem with the inclusion in the other order the + * userspace libc headers must be fixed like this: + * + * * For all definitions that conflict with kernel definitions wrap those + * defines in the following: + * #if !__UAPI_DEF_FOO + * ... + * #endif + * + * This prevents the redefinition of a construct already defined by the kernel. + */ +#ifndef _UAPI_LIBC_COMPAT_H +#define _UAPI_LIBC_COMPAT_H + +/* We have included glibc headers... */ +#if defined(__GLIBC__) + +/* Coordinate with glibc netinet/in.h header. */ +#if defined(_NETINET_IN_H) + +/* GLIBC headers included first so don't define anything + * that would already be defined. */ +#define __UAPI_DEF_IN6_ADDR 0 +/* The exception is the in6_addr macros which must be defined + * if the glibc code didn't define them. This guard matches + * the guard in glibc/inet/netinet/in.h which defines the + * additional in6_addr macros e.g. s6_addr16, and s6_addr32. */ +#if defined(__USE_MISC) || defined (__USE_GNU) +#define __UAPI_DEF_IN6_ADDR_ALT 0 +#else +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#endif +#define __UAPI_DEF_SOCKADDR_IN6 0 +#define __UAPI_DEF_IPV6_MREQ 0 +#define __UAPI_DEF_IPPROTO_V6 0 + +#else + +/* Linux headers included first, and we must define everything + * we need. The expectation is that glibc will check the + * __UAPI_DEF_* defines and adjust appropriately. */ +#define __UAPI_DEF_IN6_ADDR 1 +/* We unconditionally define the in6_addr macros and glibc must + * coordinate. */ +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#define __UAPI_DEF_SOCKADDR_IN6 1 +#define __UAPI_DEF_IPV6_MREQ 1 +#define __UAPI_DEF_IPPROTO_V6 1 + +#endif /* _NETINET_IN_H */ + + +/* If we did not see any headers from any supported C libraries, + * or we are being included in the kernel, then define everything + * that we need. */ +#else /* !defined(__GLIBC__) */ + +/* Definitions for in6.h */ +#define __UAPI_DEF_IN6_ADDR 1 +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#define __UAPI_DEF_SOCKADDR_IN6 1 +#define __UAPI_DEF_IPV6_MREQ 1 +#define __UAPI_DEF_IPPROTO_V6 1 + +#endif /* __GLIBC__ */ + +#endif /* _UAPI_LIBC_COMPAT_H */ -- cgit v1.2.3