From 82706b8f7bd1365e50478d3d0f6090f22e4571c7 Mon Sep 17 00:00:00 2001 From: Khem Raj Date: Thu, 3 Jul 2008 19:02:41 +0900 Subject: sh: Prevent leaking of CONFIG_SUPERH32 to userspace in asm/unistd.h. CONFIG_SUPERH32 is currently trickling into userspace unistd.h. Attached patch uses __SH5__ define in userspace. Signed-off-by: Khem Raj Signed-off-by: Paul Mundt --- include/asm-sh/unistd.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h index 4b21f369c28c..65be656ead7d 100644 --- a/include/asm-sh/unistd.h +++ b/include/asm-sh/unistd.h @@ -1,5 +1,13 @@ -#ifdef CONFIG_SUPERH32 -# include "unistd_32.h" +#ifdef __KERNEL__ +# ifdef CONFIG_SUPERH32 +# include "unistd_32.h" +# else +# include "unistd_64.h" +# endif #else -# include "unistd_64.h" +# ifdef __SH5__ +# include "unistd_64.h" +# else +# include "unistd_32.h" +# endif #endif -- cgit v1.2.3 From 3bc24a1a5441ef621daf737ec93b0a10e8999d59 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 19 May 2008 13:40:12 +0900 Subject: sh: Initial ELF FDPIC support. This adds initial support for ELF FDPIC on MMU-less SH, as per version 0.2 of the ABI definition at: http://www.codesourcery.com/public/docs/sh-fdpic/sh-fdpic-abi.txt Signed-off-by: Paul Mundt --- arch/sh/kernel/ptrace_32.c | 23 ++++++++++++++++++++ arch/sh/kernel/signal_32.c | 25 ++++++++++++++++++++-- fs/Kconfig.binfmt | 2 +- include/asm-sh/elf.h | 53 +++++++++++++++++++++++++++++++++++++++++++++- include/asm-sh/mmu.h | 4 ++++ include/asm-sh/ptrace.h | 5 +++++ 6 files changed, 108 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index fddb547f3c2b..2bc72def5cf8 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -240,6 +240,29 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } break; } +#endif +#ifdef CONFIG_BINFMT_ELF_FDPIC + case PTRACE_GETFDPIC: { + unsigned long tmp = 0; + + switch (addr) { + case PTRACE_GETFDPIC_EXEC: + tmp = child->mm->context.exec_fdpic_loadmap; + break; + case PTRACE_GETFDPIC_INTERP: + tmp = child->mm->context.interp_fdpic_loadmap; + break; + default: + break; + } + + ret = 0; + if (put_user(tmp, (unsigned long *) data)) { + ret = -EFAULT; + break; + } + break; + } #endif default: ret = ptrace_request(child, request, addr, data); diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index f311551d9a05..46170a9a7221 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -33,6 +33,11 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) +struct fdpic_func_descriptor { + unsigned long text; + unsigned long GOT; +}; + /* * Atomically swap in the new signal mask, and wait for a signal. */ @@ -378,7 +383,15 @@ static int setup_frame(int sig, struct k_sigaction *ka, regs->regs[4] = signal; /* Arg for signal handler */ regs->regs[5] = 0; regs->regs[6] = (unsigned long) &frame->sc; - regs->pc = (unsigned long) ka->sa.sa_handler; + + if (current->personality & FDPIC_FUNCPTRS) { + struct fdpic_func_descriptor __user *funcptr = + (struct fdpic_func_descriptor __user *)ka->sa.sa_handler; + + __get_user(regs->pc, &funcptr->text); + __get_user(regs->regs[12], &funcptr->GOT); + } else + regs->pc = (unsigned long)ka->sa.sa_handler; set_fs(USER_DS); @@ -458,7 +471,15 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->regs[4] = signal; /* Arg for signal handler */ regs->regs[5] = (unsigned long) &frame->info; regs->regs[6] = (unsigned long) &frame->uc; - regs->pc = (unsigned long) ka->sa.sa_handler; + + if (current->personality & FDPIC_FUNCPTRS) { + struct fdpic_func_descriptor __user *funcptr = + (struct fdpic_func_descriptor __user *)ka->sa.sa_handler; + + __get_user(regs->pc, &funcptr->text); + __get_user(regs->regs[12], &funcptr->GOT); + } else + regs->pc = (unsigned long)ka->sa.sa_handler; set_fs(USER_DS); diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index 3263084eef9e..4a551af6f3fc 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -30,7 +30,7 @@ config COMPAT_BINFMT_ELF config BINFMT_ELF_FDPIC bool "Kernel support for FDPIC ELF binaries" default y - depends on (FRV || BLACKFIN) + depends on (FRV || BLACKFIN || (SUPERH32 && !MMU)) help ELF FDPIC binaries are based on ELF, but allow the individual load segments of a binary to be located in memory independently of each diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h index 05092da1aa59..f01449a8d378 100644 --- a/include/asm-sh/elf.h +++ b/include/asm-sh/elf.h @@ -1,10 +1,15 @@ #ifndef __ASM_SH_ELF_H #define __ASM_SH_ELF_H +#include #include #include #include +/* ELF header e_flags defines */ +#define EF_SH_PIC 0x100 /* -fpic */ +#define EF_SH_FDPIC 0x8000 /* -mfdpic */ + /* SH (particularly SHcompact) relocation types */ #define R_SH_NONE 0 #define R_SH_DIR32 1 @@ -43,6 +48,28 @@ #define R_SH_RELATIVE 165 #define R_SH_GOTOFF 166 #define R_SH_GOTPC 167 + +/* FDPIC relocs */ +#define R_SH_GOT20 70 +#define R_SH_GOTOFF20 71 +#define R_SH_GOTFUNCDESC 72 +#define R_SH_GOTFUNCDESC20 73 +#define R_SH_GOTOFFFUNCDESC 74 +#define R_SH_GOTOFFFUNCDESC20 75 +#define R_SH_FUNCDESC 76 +#define R_SH_FUNCDESC_VALUE 77 + +#if 0 /* XXX - later .. */ +#define R_SH_GOT20 198 +#define R_SH_GOTOFF20 199 +#define R_SH_GOTFUNCDESC 200 +#define R_SH_GOTFUNCDESC20 201 +#define R_SH_GOTOFFFUNCDESC 202 +#define R_SH_GOTOFFFUNCDESC20 203 +#define R_SH_FUNCDESC 204 +#define R_SH_FUNCDESC_VALUE 205 +#endif + /* SHmedia relocs */ #define R_SH_IMM_LOW16 246 #define R_SH_IMM_LOW16_PCREL 247 @@ -77,9 +104,12 @@ typedef struct user_fpu_struct elf_fpregset_t; /* * This is used to ensure we don't load something for the wrong architecture. */ -#define elf_check_arch(x) ( (x)->e_machine == EM_SH ) +#define elf_check_arch(x) ((x)->e_machine == EM_SH) +#define elf_check_fdpic(x) ((x)->e_flags & EF_SH_FDPIC) +#define elf_check_const_displacement(x) ((x)->e_flags & EF_SH_PIC) #define USE_ELF_CORE_DUMP +#define ELF_FDPIC_CORE_EFLAGS EF_SH_FDPIC #define ELF_EXEC_PAGESIZE PAGE_SIZE /* This is the location that an ET_DYN program is loaded if exec'ed. Typical @@ -136,6 +166,27 @@ typedef struct user_fpu_struct elf_fpregset_t; _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \ _r->sr = SR_FD; } while (0) + +#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, \ + _dynamic_addr) \ +do { \ + _r->regs[0] = 0; \ + _r->regs[1] = 0; \ + _r->regs[2] = 0; \ + _r->regs[3] = 0; \ + _r->regs[4] = 0; \ + _r->regs[5] = 0; \ + _r->regs[6] = 0; \ + _r->regs[7] = 0; \ + _r->regs[8] = _exec_map_addr; \ + _r->regs[9] = _interp_map_addr; \ + _r->regs[10] = _dynamic_addr; \ + _r->regs[11] = 0; \ + _r->regs[12] = 0; \ + _r->regs[13] = 0; \ + _r->regs[14] = 0; \ + _r->sr = SR_FD; \ +} while (0) #endif #define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) diff --git a/include/asm-sh/mmu.h b/include/asm-sh/mmu.h index eb0358c097d0..fdcb93bc6d11 100644 --- a/include/asm-sh/mmu.h +++ b/include/asm-sh/mmu.h @@ -12,6 +12,10 @@ typedef struct { struct vm_list_struct *vmlist; unsigned long end_brk; #endif +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif } mm_context_t; /* diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h index 7d36dc3bee69..643ab5a7cf3b 100644 --- a/include/asm-sh/ptrace.h +++ b/include/asm-sh/ptrace.h @@ -87,6 +87,11 @@ struct pt_dspregs { unsigned long mod; }; +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ + +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ + #define PTRACE_GETDSPREGS 55 #define PTRACE_SETDSPREGS 56 #endif -- cgit v1.2.3 From 02f7e627f9248a478cf790112a07ae2c612b895a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 18:48:54 +0900 Subject: sh: Consolidate segment modifiers across mmu/nommu systems. This moves get_fs/set_fs() and friends in to asm/segment.h. The mm_segment_t definition is likewise consolidated from the _32/_64 split. This is prepatory groundwork for using the generic address space limit and verification routines across mmu/nommu configs. Signed-off-by: Paul Mundt --- include/asm-sh/processor.h | 1 + include/asm-sh/processor_32.h | 4 ---- include/asm-sh/processor_64.h | 4 ---- include/asm-sh/segment.h | 30 +++++++++++++++++++++++++++++- include/asm-sh/uaccess_32.h | 33 +++------------------------------ 5 files changed, 33 insertions(+), 39 deletions(-) (limited to 'include') diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index b7c7ce80f03e..15d9f92ca383 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -2,6 +2,7 @@ #define __ASM_SH_PROCESSOR_H #include +#include #ifndef __ASSEMBLY__ /* diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h index c09305d6a9d9..81628f144faf 100644 --- a/include/asm-sh/processor_32.h +++ b/include/asm-sh/processor_32.h @@ -113,10 +113,6 @@ struct thread_struct { union sh_fpu_union fpu; }; -typedef struct { - unsigned long seg; -} mm_segment_t; - /* Count of active tasks with UBC settings */ extern int ubc_usercnt; diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h index 88a2edf8fa5d..fc7fc685ba27 100644 --- a/include/asm-sh/processor_64.h +++ b/include/asm-sh/processor_64.h @@ -166,10 +166,6 @@ struct thread_struct { union sh_fpu_union fpu; }; -typedef struct { - unsigned long seg; -} mm_segment_t; - #define INIT_MMAP \ { &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL } diff --git a/include/asm-sh/segment.h b/include/asm-sh/segment.h index e417eab4c7d7..5e2725f4ac49 100644 --- a/include/asm-sh/segment.h +++ b/include/asm-sh/segment.h @@ -1,6 +1,34 @@ #ifndef __ASM_SH_SEGMENT_H #define __ASM_SH_SEGMENT_H -/* Only here because we have some old header files that expect it.. */ +#ifndef __ASSEMBLY__ +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) +#ifdef CONFIG_MMU +#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) +#else +#define USER_DS KERNEL_DS +#endif + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#define get_ds() (KERNEL_DS) + +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#endif /* __ASSEMBLY__ */ #endif /* __ASM_SH_SEGMENT_H */ diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h index 1e41fda74bd3..0795ee5919d1 100644 --- a/include/asm-sh/uaccess_32.h +++ b/include/asm-sh/uaccess_32.h @@ -1,9 +1,8 @@ -/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $ - * +/* * User space memory access functions * * Copyright (C) 1999, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2008 Paul Mundt * * Based on: * MIPS implementation version 1.15 by @@ -15,40 +14,16 @@ #include #include +#include #define VERIFY_READ 0 #define VERIFY_WRITE 1 -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons (Data Segment Register?), these macros are misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) -#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define get_ds() (KERNEL_DS) #if !defined(CONFIG_MMU) /* NOMMU is always true */ #define __addr_ok(addr) (1) -static inline mm_segment_t get_fs(void) -{ - return USER_DS; -} - -static inline void set_fs(mm_segment_t s) -{ -} - /* * __access_ok: Check if address with size is OK or not. * @@ -64,8 +39,6 @@ static inline int __access_ok(unsigned long addr, unsigned long size) #define __addr_ok(addr) \ ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) /* * __access_ok: Check if address with size is OK or not. -- cgit v1.2.3 From 66dfe18114839a7297f56f43f03125f4121de79b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 18:54:02 +0900 Subject: sh: Add support for 16kB PAGE_SIZE. 16kB is a useful size on nommu, while 64kB still tends to be too big to be useful. Newer MMUs are likely to support this as well, so plug it in in anticipation of those, too. Signed-off-by: Paul Mundt --- arch/sh/mm/Kconfig | 6 ++++++ include/asm-sh/page.h | 2 ++ include/asm-sh/pgtable_32.h | 4 +++- include/asm-sh/thread_info.h | 2 ++ 4 files changed, 13 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 5267c434d6eb..29d8e3c58b34 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -155,6 +155,12 @@ config PAGE_SIZE_8KB help This enables 8kB pages as supported by SH-X2 and later MMUs. +config PAGE_SIZE_16KB + bool "16kB" + depends on !MMU + help + This enables 16kB pages on MMU-less SH systems. + config PAGE_SIZE_64KB bool "64kB" depends on !MMU || CPU_SH4 || CPU_SH5 diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index 5dc01d2fcc4c..77fb8bf02e4e 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -12,6 +12,8 @@ # define PAGE_SHIFT 12 #elif defined(CONFIG_PAGE_SIZE_8KB) # define PAGE_SHIFT 13 +#elif defined(CONFIG_PAGE_SIZE_16KB) +# define PAGE_SHIFT 14 #elif defined(CONFIG_PAGE_SIZE_64KB) # define PAGE_SHIFT 16 #else diff --git a/include/asm-sh/pgtable_32.h b/include/asm-sh/pgtable_32.h index cbc731d35c25..72ea209195bd 100644 --- a/include/asm-sh/pgtable_32.h +++ b/include/asm-sh/pgtable_32.h @@ -102,7 +102,9 @@ #define _PAGE_FLAGS_HARDWARE_MASK (PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS)) /* Hardware flags, page size encoding */ -#if defined(CONFIG_X2TLB) +#if !defined(CONFIG_MMU) +# define _PAGE_FLAGS_HARD 0ULL +#elif defined(CONFIG_X2TLB) # if defined(CONFIG_PAGE_SIZE_4KB) # define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0) # elif defined(CONFIG_PAGE_SIZE_8KB) diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h index 5131e3907525..eeb4c747119e 100644 --- a/include/asm-sh/thread_info.h +++ b/include/asm-sh/thread_info.h @@ -38,6 +38,8 @@ struct thread_info { #define THREAD_SIZE_ORDER (1) #elif defined(CONFIG_PAGE_SIZE_8KB) #define THREAD_SIZE_ORDER (1) +#elif defined(CONFIG_PAGE_SIZE_16KB) +#define THREAD_SIZE_ORDER (0) #elif defined(CONFIG_PAGE_SIZE_64KB) #define THREAD_SIZE_ORDER (0) #else -- cgit v1.2.3 From 85247285ea6f6e2087193b2a720404690e9cb1b3 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 19:37:35 +0900 Subject: sh: Use the common segment definitions for the _64 uaccess routines. Signed-off-by: Paul Mundt --- include/asm-sh/uaccess_64.h | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'include') diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h index a9b68d094844..5833754dc747 100644 --- a/include/asm-sh/uaccess_64.h +++ b/include/asm-sh/uaccess_64.h @@ -26,25 +26,6 @@ #define VERIFY_READ 0 #define VERIFY_WRITE 1 -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons (Data Segment Register?), these macros are misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -#define USER_DS MAKE_MM_SEG(0x80000000) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit=(x)) - -#define segment_eq(a,b) ((a).seg == (b).seg) - #define __addr_ok(addr) ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) /* -- cgit v1.2.3 From 31f6a11fe764dc580b645d7aa878854fa9e85a06 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 19:38:22 +0900 Subject: sh: Consolidate addr/access_ok across mmu/nommu on 32bit. Signed-off-by: Paul Mundt --- include/asm-sh/uaccess_32.h | 39 +++------------------------------------ 1 file changed, 3 insertions(+), 36 deletions(-) (limited to 'include') diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h index 0795ee5919d1..44abd1682329 100644 --- a/include/asm-sh/uaccess_32.h +++ b/include/asm-sh/uaccess_32.h @@ -19,26 +19,8 @@ #define VERIFY_READ 0 #define VERIFY_WRITE 1 - -#if !defined(CONFIG_MMU) -/* NOMMU is always true */ -#define __addr_ok(addr) (1) - -/* - * __access_ok: Check if address with size is OK or not. - * - * If we don't have an MMU (or if its disabled) the only thing we really have - * to look out for is if the address resides somewhere outside of what - * available RAM we have. - */ -static inline int __access_ok(unsigned long addr, unsigned long size) -{ - return 1; -} -#else /* CONFIG_MMU */ #define __addr_ok(addr) \ - ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - + ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) /* * __access_ok: Check if address with size is OK or not. @@ -48,23 +30,8 @@ static inline int __access_ok(unsigned long addr, unsigned long size) * sum := addr + size; carry? --> flag = true; * if (sum >= addr_limit) flag = true; */ -static inline int __access_ok(unsigned long addr, unsigned long size) -{ - unsigned long flag, sum; - - __asm__("clrt\n\t" - "addc %3, %1\n\t" - "movt %0\n\t" - "cmp/hi %4, %1\n\t" - "rotcl %0" - :"=&r" (flag), "=r" (sum) - :"1" (addr), "r" (size), - "r" (current_thread_info()->addr_limit.seg) - :"t"); - return flag == 0; -} -#endif /* CONFIG_MMU */ - +#define __access_ok(addr, size) \ + (__addr_ok((addr) + (size))) #define access_ok(type, addr, size) \ (__chk_user_ptr(addr), \ __access_ok((unsigned long __force)(addr), (size))) -- cgit v1.2.3 From 42fd3b142d8867f5b58d6fb75592cd20fd654c1b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 20:05:39 +0900 Subject: sh: Initial consolidation of the _32/_64 uaccess split. This consolidates everything but the bare assembly routines, which we will sync up in a follow-up patch. Signed-off-by: Paul Mundt --- include/asm-sh/uaccess.h | 222 +++++++++++++++++++++++++++++++++++ include/asm-sh/uaccess_32.h | 277 ++++++++------------------------------------ include/asm-sh/uaccess_64.h | 187 ------------------------------ 3 files changed, 270 insertions(+), 416 deletions(-) (limited to 'include') diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h index b3440c305b5d..45c2c9b2993d 100644 --- a/include/asm-sh/uaccess.h +++ b/include/asm-sh/uaccess.h @@ -1,12 +1,171 @@ #ifndef __ASM_SH_UACCESS_H #define __ASM_SH_UACCESS_H +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define __addr_ok(addr) \ + ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) + +/* + * __access_ok: Check if address with size is OK or not. + * + * Uhhuh, this needs 33-bit arithmetic. We have a carry.. + * + * sum := addr + size; carry? --> flag = true; + * if (sum >= addr_limit) flag = true; + */ +#define __access_ok(addr, size) \ + (__addr_ok((addr) + (size))) +#define access_ok(type, addr, size) \ + (__chk_user_ptr(addr), \ + __access_ok((unsigned long __force)(addr), (size))) + +/* + * Uh, these should become the main single-value transfer routines ... + * They automatically use the right size if we just have the right + * pointer type ... + * + * As SuperH uses the same address space for kernel and user data, we + * can just do these as direct assignments. + * + * Careful to not + * (a) re-use the arguments for side effects (sizeof is ok) + * (b) require any knowledge of processes at this stage + */ +#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) +#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the user has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) +#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct __user *)(x)) + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err; \ + unsigned long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) *__gu_addr = (ptr); \ + if (likely(access_ok(VERIFY_READ, __gu_addr, (size)))) \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x,ptr,size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ + __put_user_size((x), __pu_addr, (size), \ + __pu_err); \ + __pu_err; \ +}) + #ifdef CONFIG_SUPERH32 # include "uaccess_32.h" #else # include "uaccess_64.h" #endif +/* Generic arbitrary sized copy. */ +/* Return the number of bytes NOT copied */ +__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); + +static __always_inline unsigned long +__copy_from_user(void *to, const void __user *from, unsigned long n) +{ + return __copy_user(to, (__force void *)from, n); +} + +static __always_inline unsigned long __must_check +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return __copy_user((__force void *)to, from, n); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +/* + * Clear the area and return remaining number of bytes + * (on failure. Usually it's 0.) + */ +__kernel_size_t __clear_user(void *addr, __kernel_size_t size); + +#define clear_user(addr,n) \ +({ \ + void __user * __cl_addr = (addr); \ + unsigned long __cl_size = (n); \ + \ + if (__cl_size && access_ok(VERIFY_WRITE, \ + ((unsigned long)(__cl_addr)), __cl_size)) \ + __cl_size = __clear_user(__cl_addr, __cl_size); \ + \ + __cl_size; \ +}) + +/** + * strncpy_from_user: - Copy a NUL terminated string from userspace. + * @dst: Destination address, in kernel space. This buffer must be at + * least @count bytes long. + * @src: Source address, in user space. + * @count: Maximum number of bytes to copy, including the trailing NUL. + * + * Copies a NUL-terminated string from userspace to kernel space. + * + * On success, returns the length of the string (not including the trailing + * NUL). + * + * If access to userspace fails, returns -EFAULT (some data may have been + * copied). + * + * If @count is smaller than the length of the string, copies @count bytes + * and returns @count. + */ +#define strncpy_from_user(dest,src,count) \ +({ \ + unsigned long __sfu_src = (unsigned long)(src); \ + int __sfu_count = (int)(count); \ + long __sfu_res = -EFAULT; \ + \ + if (__access_ok(__sfu_src, __sfu_count)) \ + __sfu_res = __strncpy_from_user((unsigned long)(dest), \ + __sfu_src, __sfu_count); \ + \ + __sfu_res; \ +}) + static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n) { @@ -31,4 +190,67 @@ copy_to_user(void __user *to, const void *from, unsigned long n) return __copy_size; } +/** + * strnlen_user: - Get the size of a string in user space. + * @s: The string to measure. + * @n: The maximum valid length + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * If the string is too long, returns a value greater than @n. + */ +static inline long strnlen_user(const char __user *s, long n) +{ + if (!__addr_ok(s)) + return 0; + else + return __strnlen_user(s, n); +} + +/** + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ +struct exception_table_entry { + unsigned long insn, fixup; +}; + +#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU) +#define ARCH_HAS_SEARCH_EXTABLE +#endif + +int fixup_exception(struct pt_regs *regs); +/* Returns 0 if exception not found and fixup.unit otherwise. */ +unsigned long search_exception_table(unsigned long addr); +const struct exception_table_entry *search_exception_tables(unsigned long addr); + + #endif /* __ASM_SH_UACCESS_H */ diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h index 44abd1682329..ae0d24f6653f 100644 --- a/include/asm-sh/uaccess_32.h +++ b/include/asm-sh/uaccess_32.h @@ -12,56 +12,6 @@ #ifndef __ASM_SH_UACCESS_32_H #define __ASM_SH_UACCESS_32_H -#include -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define __addr_ok(addr) \ - ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) - -/* - * __access_ok: Check if address with size is OK or not. - * - * Uhhuh, this needs 33-bit arithmetic. We have a carry.. - * - * sum := addr + size; carry? --> flag = true; - * if (sum >= addr_limit) flag = true; - */ -#define __access_ok(addr, size) \ - (__addr_ok((addr) + (size))) -#define access_ok(type, addr, size) \ - (__chk_user_ptr(addr), \ - __access_ok((unsigned long __force)(addr), (size))) - -/* - * Uh, these should become the main single-value transfer routines ... - * They automatically use the right size if we just have the right - * pointer type ... - * - * As SuperH uses the same address space for kernel and user data, we - * can just do these as direct assignments. - * - * Careful to not - * (a) re-use the arguments for side effects (sizeof is ok) - * (b) require any knowledge of processes at this stage - */ -#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) -#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) -#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct __user *)(x)) - #define __get_user_size(x,ptr,size,retval) \ do { \ retval = 0; \ @@ -81,28 +31,7 @@ do { \ } \ } while (0) -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) *__gu_addr = (ptr); \ - if (likely(access_ok(VERIFY_READ, __gu_addr, (size)))) \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - +#ifdef CONFIG_MMU #define __get_user_asm(x, addr, err, insn) \ ({ \ __asm__ __volatile__( \ @@ -123,6 +52,16 @@ __asm__ __volatile__( \ ".previous" \ :"=&r" (err), "=&r" (x) \ :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); }) +#else +#define __get_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "mov." insn " %1, %0\n\t" \ + : "=&r" (x) \ + : "m" (__m(addr)) \ + ); \ +} while (0) +#endif /* CONFIG_MMU */ extern void __get_user_unknown(void); @@ -147,45 +86,41 @@ do { \ } \ } while (0) -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ - __put_user_size((x), __pu_addr, (size), \ - __pu_err); \ - __pu_err; \ -}) - -#define __put_user_asm(x, addr, err, insn) \ -({ \ -__asm__ __volatile__( \ - "1:\n\t" \ - "mov." insn " %1, %2\n\t" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "mov.l 4f, %0\n\t" \ - "jmp @%0\n\t" \ - " mov %3, %0\n\t" \ - ".balign 4\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - :"=&r" (err) \ - :"r" (x), "m" (__m(addr)), "i" (-EFAULT), "0" (err) \ - :"memory"); }) +#ifdef CONFIG_MMU +#define __put_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "1:\n\t" \ + "mov." insn " %1, %2\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov.l 4f, %0\n\t" \ + "jmp @%0\n\t" \ + " mov %3, %0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=&r" (err) \ + : "r" (x), "m" (__m(addr)), "i" (-EFAULT), \ + "0" (err) \ + : "memory" \ + ); \ +} while (0) +#else +#define __put_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "mov." insn " %0, %1\n\t" \ + : /* no outputs */ \ + : "r" (x), "m" (__m(addr)) \ + : "memory" \ + ); \ +} while (0) +#endif /* CONFIG_MMU */ #if defined(CONFIG_CPU_LITTLE_ENDIAN) #define __put_user_u64(val,addr,retval) \ @@ -235,40 +170,7 @@ __asm__ __volatile__( \ extern void __put_user_unknown(void); -/* Generic arbitrary sized copy. */ -/* Return the number of bytes NOT copied */ -__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); - - -static __always_inline unsigned long -__copy_from_user(void *to, const void __user *from, unsigned long n) -{ - return __copy_user(to, (__force void *)from, n); -} - -static __always_inline unsigned long __must_check -__copy_to_user(void __user *to, const void *from, unsigned long n) -{ - return __copy_user((__force void *)to, from, n); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/* - * Clear the area and return remaining number of bytes - * (on failure. Usually it's 0.) - */ -extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size); - -#define clear_user(addr,n) ({ \ -void * __cl_addr = (addr); \ -unsigned long __cl_size = (n); \ -if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \ -__cl_size = __clear_user(__cl_addr, __cl_size); \ -__cl_size; }) - -static __inline__ int +static inline int __strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count) { __kernel_size_t res; @@ -307,37 +209,11 @@ __strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __coun return res; } -/** - * strncpy_from_user: - Copy a NUL terminated string from userspace. - * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. - * @src: Source address, in user space. - * @count: Maximum number of bytes to copy, including the trailing NUL. - * - * Copies a NUL-terminated string from userspace to kernel space. - * - * On success, returns the length of the string (not including the trailing - * NUL). - * - * If access to userspace fails, returns -EFAULT (some data may have been - * copied). - * - * If @count is smaller than the length of the string, copies @count bytes - * and returns @count. - */ -#define strncpy_from_user(dest,src,count) ({ \ -unsigned long __sfu_src = (unsigned long) (src); \ -int __sfu_count = (int) (count); \ -long __sfu_res = -EFAULT; \ -if(__access_ok(__sfu_src, __sfu_count)) { \ -__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \ -} __sfu_res; }) - /* * Return the size of a string (including the ending 0 even when we have * exceeded the maximum string length). */ -static __inline__ long __strnlen_user(const char __user *__s, long __n) +static inline long __strnlen_user(const char __user *__s, long __n) { unsigned long res; unsigned long __dummy; @@ -369,61 +245,4 @@ static __inline__ long __strnlen_user(const char __user *__s, long __n) return res; } -/** - * strnlen_user: - Get the size of a string in user space. - * @s: The string to measure. - * @n: The maximum valid length - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * If the string is too long, returns a value greater than @n. - */ -static __inline__ long strnlen_user(const char __user *s, long n) -{ - if (!__addr_ok(s)) - return 0; - else - return __strnlen_user(s, n); -} - -/** - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -extern int fixup_exception(struct pt_regs *regs); - #endif /* __ASM_SH_UACCESS_32_H */ diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h index 5833754dc747..81b3d515fcb3 100644 --- a/include/asm-sh/uaccess_64.h +++ b/include/asm-sh/uaccess_64.h @@ -20,68 +20,6 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define __addr_ok(addr) ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - -/* - * Uhhuh, this needs 33-bit arithmetic. We have a carry.. - * - * sum := addr + size; carry? --> flag = true; - * if (sum >= addr_limit) flag = true; - */ -#define __range_ok(addr,size) (((unsigned long) (addr) + (size) < (current_thread_info()->addr_limit.seg)) ? 0 : 1) - -#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) -#define __access_ok(addr,size) (__range_ok(addr,size) == 0) - -/* - * Uh, these should become the main single-value transfer routines ... - * They automatically use the right size if we just have the right - * pointer type ... - * - * As MIPS uses the same address space for kernel and user data, we - * can just do these as direct assignments. - * - * Careful to not - * (a) re-use the arguments for side effects (sizeof is ok) - * (b) require any knowledge of processes at this stage - */ -#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr))) -#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr))) -#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr))) - -/* - * The "xxx_ret" versions return constant specified in third argument, if - * something bad happens. These macros can be optimized for the - * case of just returning from the function xxx_ret is used. - */ - -#define put_user_ret(x,ptr,ret) ({ \ -if (put_user(x,ptr)) return ret; }) - -#define get_user_ret(x,ptr,ret) ({ \ -if (get_user(x,ptr)) return ret; }) - -#define __put_user_ret(x,ptr,ret) ({ \ -if (__put_user(x,ptr)) return ret; }) - -#define __get_user_ret(x,ptr,ret) ({ \ -if (__get_user(x,ptr)) return ret; }) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) #define __get_user_size(x,ptr,size,retval) \ do { \ @@ -105,26 +43,6 @@ do { \ } \ } while (0) -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err, __gu_val; \ - __get_user_size((void *)&__gu_val, (long)(ptr), \ - (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_addr = (long)(ptr); \ - long __gu_err = -EFAULT, __gu_val; \ - if (__access_ok(__gu_addr, (size))) \ - __get_user_size((void *)&__gu_val, __gu_addr, \ - (size), __gu_err); \ - (x) = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ -}) - extern long __get_user_asm_b(void *, long); extern long __get_user_asm_w(void *, long); extern long __get_user_asm_l(void *, long); @@ -152,115 +70,10 @@ do { \ } \ } while (0) -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __pu_val = (x); \ - __put_user_size((void *)&__pu_val, (long)(ptr), (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - long __pu_addr = (long)(ptr); \ - __typeof__(*(ptr)) __pu_val = (x); \ - \ - if (__access_ok(__pu_addr, (size))) \ - __put_user_size((void *)&__pu_val, __pu_addr, (size), __pu_err);\ - __pu_err; \ -}) - extern long __put_user_asm_b(void *, long); extern long __put_user_asm_w(void *, long); extern long __put_user_asm_l(void *, long); extern long __put_user_asm_q(void *, long); extern void __put_user_unknown(void); - -/* Generic arbitrary sized copy. */ -/* Return the number of bytes NOT copied */ -/* XXX: should be such that: 4byte and the rest. */ -extern __kernel_size_t __copy_user(void *__to, const void *__from, __kernel_size_t __n); - -#define copy_to_user_ret(to,from,n,retval) ({ \ -if (copy_to_user(to,from,n)) \ - return retval; \ -}) - -#define __copy_to_user(to,from,n) \ - __copy_user((void *)(to), \ - (void *)(from), n) - -#define __copy_to_user_ret(to,from,n,retval) ({ \ -if (__copy_to_user(to,from,n)) \ - return retval; \ -}) - -#define copy_from_user_ret(to,from,n,retval) ({ \ -if (copy_from_user(to,from,n)) \ - return retval; \ -}) - -#define __copy_from_user(to,from,n) \ - __copy_user((void *)(to), \ - (void *)(from), n) - -#define __copy_from_user_ret(to,from,n,retval) ({ \ -if (__copy_from_user(to,from,n)) \ - return retval; \ -}) - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/* XXX: Not sure it works well.. - should be such that: 4byte clear and the rest. */ -extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size); - -#define clear_user(addr,n) ({ \ -void * __cl_addr = (addr); \ -unsigned long __cl_size = (n); \ -if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \ -__cl_size = __clear_user(__cl_addr, __cl_size); \ -__cl_size; }) - -extern int __strncpy_from_user(unsigned long __dest, unsigned long __src, int __count); - -#define strncpy_from_user(dest,src,count) ({ \ -unsigned long __sfu_src = (unsigned long) (src); \ -int __sfu_count = (int) (count); \ -long __sfu_res = -EFAULT; \ -if(__access_ok(__sfu_src, __sfu_count)) { \ -__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \ -} __sfu_res; }) - -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) - -/* - * Return the size of a string (including the ending 0!) - */ -extern long __strnlen_user(const char *__s, long __n); - -static inline long strnlen_user(const char *s, long n) -{ - if (!__addr_ok(s)) - return 0; - else - return __strnlen_user(s, n); -} - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -#ifdef CONFIG_MMU -#define ARCH_HAS_SEARCH_EXTABLE -#endif - -/* Returns 0 if exception not found and fixup.unit otherwise. */ -extern unsigned long search_exception_table(unsigned long addr); -extern const struct exception_table_entry *search_exception_tables (unsigned long addr); - #endif /* __ASM_SH_UACCESS_64_H */ -- cgit v1.2.3 From 4cec1a37ba7d9dce6ed5d8259b95272100a98b1f Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 6 Jun 2008 17:04:56 +0900 Subject: sh: Renesas Solutions SH7763RDP board support This patch adds basic support for the SH7763RDP board. This supports a basic stuff provided in SH7763, like SCIF, NOR Flash and USB host. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 7 + arch/sh/Makefile | 1 + arch/sh/boards/renesas/sh7763rdp/Makefile | 1 + arch/sh/boards/renesas/sh7763rdp/irq.c | 45 ++ arch/sh/boards/renesas/sh7763rdp/setup.c | 128 ++++ arch/sh/configs/sh7763rdp_defconfig | 1052 +++++++++++++++++++++++++++++ arch/sh/tools/mach-types | 1 + include/asm-sh/sh7763rdp.h | 54 ++ 8 files changed, 1289 insertions(+) create mode 100644 arch/sh/boards/renesas/sh7763rdp/Makefile create mode 100644 arch/sh/boards/renesas/sh7763rdp/irq.c create mode 100644 arch/sh/boards/renesas/sh7763rdp/setup.c create mode 100644 arch/sh/configs/sh7763rdp_defconfig create mode 100644 include/asm-sh/sh7763rdp.h (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ca5efe64fad6..9bbb70547f5e 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -509,6 +509,13 @@ config SH_AP325RXA Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" +config SH_SH7763RDP + bool "SH7763RDP" + depends on CPU_SUBTYPE_SH7763 + help + Select SH7763RDP if configuring for a Renesas SH7763 + evaluation board. + config SH_EDOSK7705 bool "EDOSK7705" depends on CPU_SUBTYPE_SH7705 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 73182d5e810f..1452c4df7dea 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -123,6 +123,7 @@ machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa +machdir-$(CONFIG_SH_SH7763RDP) += renesas/sh7763rdp machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev machdir-$(CONFIG_SH_LANDISK) += landisk machdir-$(CONFIG_SH_TITAN) += titan diff --git a/arch/sh/boards/renesas/sh7763rdp/Makefile b/arch/sh/boards/renesas/sh7763rdp/Makefile new file mode 100644 index 000000000000..f6c0b55516d2 --- /dev/null +++ b/arch/sh/boards/renesas/sh7763rdp/Makefile @@ -0,0 +1 @@ +obj-y := setup.o irq.o diff --git a/arch/sh/boards/renesas/sh7763rdp/irq.c b/arch/sh/boards/renesas/sh7763rdp/irq.c new file mode 100644 index 000000000000..fd850bad2dec --- /dev/null +++ b/arch/sh/boards/renesas/sh7763rdp/irq.c @@ -0,0 +1,45 @@ +/* + * linux/arch/sh/boards/renesas/sh7763rdp/irq.c + * + * Renesas Solutions SH7763RDP Support. + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include + +#define INTC_BASE (0xFFD00000) +#define INTC_INT2PRI7 (INTC_BASE+0x4001C) +#define INTC_INT2MSKCR (INTC_BASE+0x4003C) +#define INTC_INT2MSKCR1 (INTC_BASE+0x400D4) + +/* + * Initialize IRQ setting + */ +void __init init_sh7763rdp_IRQ(void) +{ + /* GPIO enabled */ + ctrl_outl(1 << 25, INTC_INT2MSKCR); + + /* enable GPIO interrupts */ + ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000, + INTC_INT2PRI7); + + /* USBH enabled */ + ctrl_outl(1 << 17, INTC_INT2MSKCR1); + + /* GETHER enabled */ + ctrl_outl(1 << 16, INTC_INT2MSKCR1); + + /* DMAC enabled */ + ctrl_outl(1 << 8, INTC_INT2MSKCR); +} diff --git a/arch/sh/boards/renesas/sh7763rdp/setup.c b/arch/sh/boards/renesas/sh7763rdp/setup.c new file mode 100644 index 000000000000..925f16af7121 --- /dev/null +++ b/arch/sh/boards/renesas/sh7763rdp/setup.c @@ -0,0 +1,128 @@ +/* + * linux/arch/sh/boards/renesas/sh7763rdp/setup.c + * + * Renesas Solutions sh7763rdp board + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include + +/* NOR Flash */ +static struct mtd_partition sh7763rdp_nor_flash_partitions[] = { + { + .name = "U-Boot", + .offset = 0, + .size = (2 * 128 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, { + .name = "Linux-Kernel", + .offset = MTDPART_OFS_APPEND, + .size = (20 * 128 * 1024), + }, { + .name = "Root Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data sh7763rdp_nor_flash_data = { + .width = 2, + .parts = sh7763rdp_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions), +}; + +static struct resource sh7763rdp_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0, + .end = (64 * 1024 * 1024), + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device sh7763rdp_nor_flash_device = { + .name = "physmap-flash", + .resource = sh7763rdp_nor_flash_resources, + .num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources), + .dev = { + .platform_data = &sh7763rdp_nor_flash_data, + }, +}; + +static struct platform_device *sh7763rdp_devices[] __initdata = { + &sh7763rdp_nor_flash_device, +}; + +static int __init sh7763rdp_devices_setup(void) +{ + return platform_add_devices(sh7763rdp_devices, + ARRAY_SIZE(sh7763rdp_devices)); +} +__initcall(sh7763rdp_devices_setup); + +static void __init sh7763rdp_setup(char **cmdline_p) +{ + /* Board version check */ + if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1) + printk(KERN_INFO "RTE Standard Configuration\n"); + else + printk(KERN_INFO "RTA Standard Configuration\n"); + + /* USB pin select bits (clear bit 5-2 to 0) */ + ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2); + /* USBH setup port I controls to other (clear bits 4-9 to 0) */ + ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR); + + /* Select USB Host controller */ + ctrl_outw(0x00, USB_USBHSC); + + /* For LCD */ + /* set PTJ7-1, bits 15-2 of PJCR to 0 */ + ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR); + /* set PTI5, bits 11-10 of PICR to 0 */ + ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR); + ctrl_outw(0, PORT_PKCR); + ctrl_outw(0, PORT_PLCR); + /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */ + ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2); + /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */ + ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3); + + /* For HAC */ + /* bit3-0 0100:HAC & SSI1 enable */ + ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1); + /* bit14 1:SSI_HAC_CLK enable */ + ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4); + + /* SH-Ether */ + ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1); + ctrl_outw(0x0, PORT_PFCR); + ctrl_outw(0x0, PORT_PFCR); + ctrl_outw(0x0, PORT_PFCR); + + /* MMC */ + /*selects SCIF and MMC other functions */ + ctrl_outw(0x0001, PORT_PSEL0); + /* MMC clock operates */ + ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1); + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR); + ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR); +} + +static struct sh_machine_vector mv_sh7763rdp __initmv = { + .mv_name = "sh7763drp", + .mv_setup = sh7763rdp_setup, + .mv_nr_irqs = 112, + .mv_init_irq = init_sh7763rdp_IRQ, +}; diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig new file mode 100644 index 000000000000..83f3fe5db3e5 --- /dev/null +++ b/arch/sh/configs/sh7763rdp_defconfig @@ -0,0 +1,1052 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc4 +# Fri Jun 6 12:20:17 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +CONFIG_CPU_SUBTYPE_SH7763=y +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +CONFIG_SH_SH7763RDP=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=66666666 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=3 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_862=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_949=y +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_ISO8859_8=y +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_ISO8859_3=y +CONFIG_NLS_ISO8859_4=y +CONFIG_NLS_ISO8859_5=y +CONFIG_NLS_ISO8859_6=y +CONFIG_NLS_ISO8859_7=y +CONFIG_NLS_ISO8859_9=y +CONFIG_NLS_ISO8859_13=y +CONFIG_NLS_ISO8859_14=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=y +CONFIG_NLS_KOI8_U=y +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 3a53f04d72d4..4473723685ca 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -48,3 +48,4 @@ SDK7780 SH_SDK7780 MIGOR SH_MIGOR RSK7203 SH_RSK7203 AP325RXA SH_AP325RXA +SH7763RDP SH_SH7763RDP diff --git a/include/asm-sh/sh7763rdp.h b/include/asm-sh/sh7763rdp.h new file mode 100644 index 000000000000..8750cc852977 --- /dev/null +++ b/include/asm-sh/sh7763rdp.h @@ -0,0 +1,54 @@ +#ifndef __ASM_SH_SH7763RDP_H +#define __ASM_SH_SH7763RDP_H + +/* + * linux/include/asm-sh/sh7763drp.h + * + * Copyright (C) 2008 Renesas Solutions + * Copyright (C) 2008 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include + +/* clock control */ +#define MSTPCR1 0xFFC80038 + +/* PORT */ +#define PORT_PSEL0 0xFFEF0070 +#define PORT_PSEL1 0xFFEF0072 +#define PORT_PSEL2 0xFFEF0074 +#define PORT_PSEL3 0xFFEF0076 +#define PORT_PSEL4 0xFFEF0078 + +#define PORT_PACR 0xFFEF0000 +#define PORT_PCCR 0xFFEF0004 +#define PORT_PFCR 0xFFEF000A +#define PORT_PGCR 0xFFEF000C +#define PORT_PHCR 0xFFEF000E +#define PORT_PICR 0xFFEF0010 +#define PORT_PJCR 0xFFEF0012 +#define PORT_PKCR 0xFFEF0014 +#define PORT_PLCR 0xFFEF0016 +#define PORT_PMCR 0xFFEF0018 +#define PORT_PNCR 0xFFEF001A + +/* FPGA */ +#define CPLD_BOARD_ID_ERV_REG 0xB1000000 +#define CPLD_CPLD_CMD_REG 0xB1000006 + +/* + * USB SH7763RDP board can use Host only. + */ +#define USB_USBHSC 0xFFEC80f0 + +/* arch/sh/boards/renesas/sh7763rdp/irq.c */ +void init_sh7763rdp_IRQ(void); +int sh7763rdp_irq_demux(int irq); +#define __IO_PREFIX sh7763rdp +#include + +#endif /* __ASM_SH_SH7763RDP_H */ -- cgit v1.2.3 From 306cfd630a4d121cf4e08b894d8b4c4cf106e57e Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Sun, 15 Jun 2008 20:48:09 +0100 Subject: maple: tidy maple_driver code by removing redundant connect/disconnect The connect and disconnect functions are unnecessary - everything they do can be accomplished in the initial probe - so remove them. Signed-off-by: Adrian McMenamin Signed-off-by: Paul Mundt --- include/linux/maple.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/maple.h b/include/linux/maple.h index d31e36ebb436..523a286bb477 100644 --- a/include/linux/maple.h +++ b/include/linux/maple.h @@ -61,8 +61,6 @@ struct maple_device { struct maple_driver { unsigned long function; - int (*connect) (struct maple_device * dev); - void (*disconnect) (struct maple_device * dev); struct device_driver drv; }; -- cgit v1.2.3 From 4c1cfab1e0f9a41246cfdcca78f3700fb67f0a5c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 18 Jun 2008 03:36:50 +0300 Subject: sh/kernel/ cleanups This patch contains the following cleanups: - make the following needlessly global code static: - cf-enabler.c: cf_init() - cpu/clock.c: __clk_enable() - cpu/clock.c: __clk_disable() - process_32.c: default_idle() - time_32.c: struct clocksource_sh - timers/timer-tmu.c: struct tmu_timer_ops - remove the following unused functions (no CONFIG_BLK_DEV_FD on sh): - process_{32,64}.c: disable_hlt() - process_{32,64}.c: enable_hlt() Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/kernel/cf-enabler.c | 2 +- arch/sh/kernel/cpu/clock.c | 6 ++---- arch/sh/kernel/process_32.c | 14 +------------- arch/sh/kernel/process_64.c | 10 ---------- arch/sh/kernel/time_32.c | 2 +- arch/sh/kernel/timers/timer-tmu.c | 2 +- include/asm-sh/clock.h | 3 --- include/asm-sh/system.h | 8 -------- include/asm-sh/timer.h | 1 - 9 files changed, 6 insertions(+), 42 deletions(-) (limited to 'include') diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index 01ff4d05aab0..d3d9f3204230 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -157,7 +157,7 @@ static int __init cf_init_se(void) } #endif -int __init cf_init(void) +static int __init cf_init(void) { if (mach_is_se() || mach_is_7722se() || mach_is_7721se()) return cf_init_se(); diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index b5f1e23ed57c..73334c689e9d 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -88,7 +88,7 @@ static void propagate_rate(struct clk *clk) } } -int __clk_enable(struct clk *clk) +static int __clk_enable(struct clk *clk) { /* * See if this is the first time we're enabling the clock, some @@ -111,7 +111,6 @@ int __clk_enable(struct clk *clk) return 0; } -EXPORT_SYMBOL_GPL(__clk_enable); int clk_enable(struct clk *clk) { @@ -131,7 +130,7 @@ static void clk_kref_release(struct kref *kref) /* Nothing to do */ } -void __clk_disable(struct clk *clk) +static void __clk_disable(struct clk *clk) { int count = kref_put(&clk->kref, clk_kref_release); @@ -143,7 +142,6 @@ void __clk_disable(struct clk *clk) clk->ops->disable(clk); } } -EXPORT_SYMBOL_GPL(__clk_disable); void clk_disable(struct clk *clk) { diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index 921892c351da..3326a45749d9 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -34,18 +34,6 @@ void (*pm_idle)(void); void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -void disable_hlt(void) -{ - hlt_counter++; -} -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} -EXPORT_SYMBOL(enable_hlt); - static int __init nohlt_setup(char *__unused) { hlt_counter = 1; @@ -60,7 +48,7 @@ static int __init hlt_setup(char *__unused) } __setup("hlt", hlt_setup); -void default_idle(void) +static void default_idle(void) { if (!hlt_counter) { clear_thread_flag(TIF_POLLING_NRFLAG); diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 0283d8133075..b9dbd2d3b4a5 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -36,16 +36,6 @@ static int hlt_counter = 1; #define HARD_IDLE_TIMEOUT (HZ / 3) -void disable_hlt(void) -{ - hlt_counter++; -} - -void enable_hlt(void) -{ - hlt_counter--; -} - static int __init nohlt_setup(char *__unused) { hlt_counter = 1; diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index 7281342c044d..0758b5ee8180 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -211,7 +211,7 @@ unsigned long sh_hpt_frequency = 0; #define NSEC_PER_CYC_SHIFT 10 -struct clocksource clocksource_sh = { +static struct clocksource clocksource_sh = { .name = "SuperH", .rating = 200, .mask = CLOCKSOURCE_MASK(32), diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 8935570008d2..1ca9ad49b541 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -209,7 +209,7 @@ static int tmu_timer_init(void) return 0; } -struct sys_timer_ops tmu_timer_ops = { +static struct sys_timer_ops tmu_timer_ops = { .init = tmu_timer_init, .start = tmu_timer_start, .stop = tmu_timer_stop, diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h index b550a27a7042..608fda55c0ea 100644 --- a/include/asm-sh/clock.h +++ b/include/asm-sh/clock.h @@ -41,9 +41,6 @@ void arch_init_clk_ops(struct clk_ops **, int type); /* arch/sh/kernel/cpu/clock.c */ int clk_init(void); -int __clk_enable(struct clk *); -void __clk_disable(struct clk *); - void clk_recalc_rate(struct clk *); int clk_register(struct clk *); diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index e65b6b822cb3..056d68cd2108 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -148,14 +148,6 @@ extern unsigned long cached_to_uncached; extern struct dentry *sh_debugfs_root; -/* XXX - * disable hlt during certain critical i/o operations - */ -#define HAVE_DISABLE_HLT -void disable_hlt(void); -void enable_hlt(void); - -void default_idle(void); void per_cpu_trap_init(void); asmlinkage void break_point_trap(void); diff --git a/include/asm-sh/timer.h b/include/asm-sh/timer.h index 701ba84c7049..327f7eb8976a 100644 --- a/include/asm-sh/timer.h +++ b/include/asm-sh/timer.h @@ -40,6 +40,5 @@ struct sys_timer *get_sys_timer(void); /* arch/sh/kernel/time.c */ void handle_timer_tick(void); extern unsigned long sh_hpt_frequency; -extern struct clocksource clocksource_sh; #endif /* __ASM_SH_TIMER_H */ -- cgit v1.2.3 From ffb91ad2751723bcc9925cd38e37013e2169e256 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 18 Jun 2008 18:29:06 +0900 Subject: sh: Solution Enginge 7710/7712 SH-Ether support Add support SH-Ether for Hitachi Solution Engine. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/se/770x/setup.c | 49 ++++++++++++++++++++++++++++++++++++++++++ include/asm-sh/se.h | 15 +++++++++++++ 2 files changed, 64 insertions(+) (limited to 'include') diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index 318bc8a3969c..25767cc3a50d 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -115,9 +115,58 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; +/* SH771X Ethernet driver */ +static struct resource sh_eth0_resources[] = { + [0] = { + .start = SH_ETH0_BASE, + .end = SH_ETH0_BASE + 0x1B8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SH_ETH0_IRQ, + .end = SH_ETH0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_eth0_device = { + .name = "sh-eth", + .id = 0, + .dev = { + .platform_data = PHY_ID, + }, + .num_resources = ARRAY_SIZE(sh_eth0_resources), + .resource = sh_eth0_resources, +}; + +static struct resource sh_eth1_resources[] = { + [0] = { + .start = SH_ETH1_BASE, + .end = SH_ETH1_BASE + 0x1B8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SH_ETH1_IRQ, + .end = SH_ETH1_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_eth1_device = { + .name = "sh-eth", + .id = 1, + .dev = { + .platform_data = PHY_ID, + }, + .num_resources = ARRAY_SIZE(sh_eth1_resources), + .resource = sh_eth1_resources, +}; + static struct platform_device *se_devices[] __initdata = { &heartbeat_device, &cf_ide_device, + &sh_eth0_device, + &sh_eth1_device, }; static int __init se_devices_setup(void) diff --git a/include/asm-sh/se.h b/include/asm-sh/se.h index bd2596c014a9..0e2f720b9664 100644 --- a/include/asm-sh/se.h +++ b/include/asm-sh/se.h @@ -76,6 +76,21 @@ #define IRQ_CFCARD 7 #endif +/* SH Ether support (SH7710/SH7712) */ +/* Base address */ +#define SH_ETH0_BASE 0xA7000000 +#define SH_ETH1_BASE 0xA7000400 +/* PHY ID */ +#if defined(CONFIG_CPU_SUBTYPE_SH7710) +# define PHY_ID 0x00 +#elif defined(CONFIG_CPU_SUBTYPE_SH7712) +# define PHY_ID 0x01 +#endif +/* Ether IRQ */ +#define SH_ETH0_IRQ 80 +#define SH_ETH1_IRQ 81 +#define SH_TSU_IRQ 82 + #define __IO_PREFIX se #include -- cgit v1.2.3 From 787d9d7e89c3952db12d9e4bb02ba5c5a85f6b7f Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 18 Jun 2008 18:32:03 +0900 Subject: sh: Clean up code of Solution Engine 770x Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/se/770x/setup.c | 4 +--- include/asm-sh/se.h | 2 ++ 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index 25767cc3a50d..cf4a5ba12df4 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -14,8 +14,6 @@ #include #include -void init_se_IRQ(void); - /* * Configure the Super I/O chip */ @@ -73,7 +71,7 @@ static struct resource cf_ide_resources[] = { }, [1] = { .start = PA_MRSHPC_IO + 0x1f0 + 0x206, - .end = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8, + .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8, .flags = IORESOURCE_MEM, }, [2] = { diff --git a/include/asm-sh/se.h b/include/asm-sh/se.h index 0e2f720b9664..eb23000e1bbe 100644 --- a/include/asm-sh/se.h +++ b/include/asm-sh/se.h @@ -91,6 +91,8 @@ #define SH_ETH1_IRQ 81 #define SH_TSU_IRQ 82 +void init_se_IRQ(void); + #define __IO_PREFIX se #include -- cgit v1.2.3 From 3611ee7acc113e5e482b7d20d5133935226f3129 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Wed, 2 Jul 2008 15:15:09 +0900 Subject: sh: Stub in silicon cut in CPU info. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4/probe.c | 3 +++ arch/sh/kernel/setup.c | 6 ++++++ include/asm-sh/processor_32.h | 1 + 3 files changed, 10 insertions(+) (limited to 'include') diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index be4926969181..db442f37852d 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -64,6 +64,9 @@ int __init detect_cpu_and_cache_system(void) if ((cvr & 0x20000000) == 1) boot_cpu_data.flags |= CPU_HAS_FPU; + /* We don't know the chip cut */ + boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1; + /* Mask off the upper chip ID */ pvr &= 0xffff; diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 9324cb91fd35..6339d0c95715 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -453,6 +453,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "processor\t: %d\n", cpu); seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine); seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c)); + if (c->cut_major == -1) + seq_printf(m, "cut\t\t: unknown\n"); + else if (c->cut_minor == -1) + seq_printf(m, "cut\t\t: %d.x\n", c->cut_major); + else + seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor); show_cpuflags(m, c); diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h index 81628f144faf..c6583f267071 100644 --- a/include/asm-sh/processor_32.h +++ b/include/asm-sh/processor_32.h @@ -28,6 +28,7 @@ struct sh_cpuinfo { unsigned int type; + int cut_major, cut_minor; unsigned long loops_per_jiffy; unsigned long asid_cache; -- cgit v1.2.3 From 09b5a10c1944214a6008712bfa92b29f00b84a1a Mon Sep 17 00:00:00 2001 From: Chris Smith Date: Wed, 2 Jul 2008 15:17:11 +0900 Subject: sh: Optimized flush_icache_range() implementation. Add implementation of flush_icache_range() suitable for signal handler and kprobes. Remove flush_cache_sigtramp() and change signal.c to use flush_icache_range(). Signed-off-by: Chris Smith Signed-off-by: Paul Mundt --- arch/sh/kernel/signal_32.c | 10 ++---- arch/sh/mm/cache-sh4.c | 67 ++++++++++++++++++++----------------- include/asm-sh/cpu-sh4/cacheflush.h | 1 - 3 files changed, 38 insertions(+), 40 deletions(-) (limited to 'include') diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index 46170a9a7221..eee29257a8ae 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -398,10 +398,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", current->comm, task_pid_nr(current), frame, regs->pc, regs->pr); - flush_cache_sigtramp(regs->pr); - - if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) - flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); + flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode)); return 0; @@ -486,10 +483,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", current->comm, task_pid_nr(current), frame, regs->pc, regs->pr); - flush_cache_sigtramp(regs->pr); - - if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) - flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); + flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode)); return 0; diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 43d7ff6b6ec7..1fdc8d90254a 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -4,6 +4,7 @@ * Copyright (C) 1999, 2000, 2002 Niibe Yutaka * Copyright (C) 2001 - 2007 Paul Mundt * Copyright (C) 2003 Richard Curnow + * Copyright (c) 2007 STMicroelectronics (R&D) Ltd. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -22,6 +23,7 @@ * entirety. */ #define MAX_DCACHE_PAGES 64 /* XXX: Tune for ways */ +#define MAX_ICACHE_PAGES 32 static void __flush_dcache_segment_1way(unsigned long start, unsigned long extent); @@ -178,42 +180,45 @@ void __flush_invalidate_region(void *start, int size) /* * Write back the range of D-cache, and purge the I-cache. * - * Called from kernel/module.c:sys_init_module and routine for a.out format. + * Called from kernel/module.c:sys_init_module and routine for a.out format, + * signal handler code and kprobes code */ void flush_icache_range(unsigned long start, unsigned long end) { - flush_cache_all(); -} - -/* - * Write back the D-cache and purge the I-cache for signal trampoline. - * .. which happens to be the same behavior as flush_icache_range(). - * So, we simply flush out a line. - */ -void __uses_jump_to_uncached flush_cache_sigtramp(unsigned long addr) -{ - unsigned long v, index; - unsigned long flags; + int icacheaddr; + unsigned long flags, v; int i; - v = addr & ~(L1_CACHE_BYTES-1); - asm volatile("ocbwb %0" - : /* no output */ - : "m" (__m(v))); - - index = CACHE_IC_ADDRESS_ARRAY | - (v & boot_cpu_data.icache.entry_mask); - - local_irq_save(flags); - jump_to_uncached(); - - for (i = 0; i < boot_cpu_data.icache.ways; - i++, index += boot_cpu_data.icache.way_incr) - ctrl_outl(0, index); /* Clear out Valid-bit */ - - back_to_cached(); - wmb(); - local_irq_restore(flags); + /* If there are too many pages then just blow the caches */ + if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) { + flush_cache_all(); + } else { + /* selectively flush d-cache then invalidate the i-cache */ + /* this is inefficient, so only use for small ranges */ + start &= ~(L1_CACHE_BYTES-1); + end += L1_CACHE_BYTES-1; + end &= ~(L1_CACHE_BYTES-1); + + local_irq_save(flags); + jump_to_uncached(); + + for (v = start; v < end; v+=L1_CACHE_BYTES) { + asm volatile("ocbwb %0" + : /* no output */ + : "m" (__m(v))); + + icacheaddr = CACHE_IC_ADDRESS_ARRAY | ( + v & cpu_data->icache.entry_mask); + + for (i = 0; i < cpu_data->icache.ways; + i++, icacheaddr += cpu_data->icache.way_incr) + /* Clear i-cache line valid-bit */ + ctrl_outl(0, icacheaddr); + } + + back_to_cached(); + local_irq_restore(flags); + } } static inline void flush_cache_4096(unsigned long start, diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h index 5fd5c89ef86a..065306d376eb 100644 --- a/include/asm-sh/cpu-sh4/cacheflush.h +++ b/include/asm-sh/cpu-sh4/cacheflush.h @@ -30,7 +30,6 @@ void flush_dcache_page(struct page *pg); #define flush_dcache_mmap_unlock(mapping) do { } while (0) void flush_icache_range(unsigned long start, unsigned long end); -void flush_cache_sigtramp(unsigned long addr); void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, unsigned long addr, int len); -- cgit v1.2.3 From 6bdfb22a8e1ffa37ae4ad35b87cb02958d1901e5 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 4 Jul 2008 12:37:12 +0900 Subject: sh: add interrupt ack code to sh4a This patch is based on interrupt acknowledge code for external interrupt sources on sh3 processors and adds on sh4a processors. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/irq/intc.c | 31 +++++++++++++++++++++++-------- arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 10 ++++++++-- arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 10 ++++++++-- arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 10 ++++++++-- arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 11 ++++++++--- arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 11 ++++++++--- arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 17 +++++++++++------ include/asm-sh/hw_irq.h | 4 ++-- 8 files changed, 76 insertions(+), 28 deletions(-) (limited to 'include') diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c index da5dae787888..8c70e201bde0 100644 --- a/arch/sh/kernel/cpu/irq/intc.c +++ b/arch/sh/kernel/cpu/irq/intc.c @@ -62,7 +62,7 @@ struct intc_desc_int { #endif static unsigned int intc_prio_level[NR_IRQS]; /* for now */ -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) static unsigned long ack_handle[NR_IRQS]; #endif @@ -231,7 +231,7 @@ static void intc_disable(unsigned int irq) } } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) static void intc_mask_ack(unsigned int irq) { struct intc_desc_int *d = get_intc_desc(irq); @@ -244,8 +244,23 @@ static void intc_mask_ack(unsigned int irq) if (handle) { addr = INTC_REG(d, _INTC_ADDR_D(handle), 0); - ctrl_inb(addr); - ctrl_outb(0x3f ^ set_field(0, 1, handle), addr); + switch (_INTC_FN(handle)) { + case REG_FN_MODIFY_BASE + 0: /* 8bit */ + ctrl_inb(addr); + ctrl_outb(0xff ^ set_field(0, 1, handle), addr); + break; + case REG_FN_MODIFY_BASE + 1: /* 16bit */ + ctrl_inw(addr); + ctrl_outw(0xffff ^ set_field(0, 1, handle), addr); + break; + case REG_FN_MODIFY_BASE + 3: /* 32bit */ + ctrl_inl(addr); + ctrl_outl(0xffffffff ^ set_field(0, 1, handle), addr); + break; + default: + BUG(); + break; + } } } #endif @@ -466,7 +481,7 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc, return 0; } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) static unsigned int __init intc_ack_data(struct intc_desc *desc, struct intc_desc_int *d, intc_enum enum_id) @@ -601,7 +616,7 @@ static void __init intc_register_irq(struct intc_desc *desc, /* irq should be disabled by default */ d->chip.mask(irq); -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) if (desc->ack_regs) ack_handle[irq] = intc_ack_data(desc, d, enum_id); #endif @@ -635,7 +650,7 @@ void __init register_intc_controller(struct intc_desc *desc) d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0; d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0; -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0; #endif d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg)); @@ -676,7 +691,7 @@ void __init register_intc_controller(struct intc_desc *desc) d->chip.mask_ack = intc_disable; d->chip.set_type = intc_set_sense; -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) if (desc->ack_regs) { for (i = 0; i < desc->nr_ack_regs; i++) k += save_reg(d, k, desc->ack_regs[i].set_reg, 0); diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index f26b5cdad0d1..f97ea8e0acf5 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -163,8 +163,14 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7366", vectors, groups, - mask_registers, prio_registers, sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 62ebccf18b3c..d8617b669fad 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -229,8 +229,14 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups, - mask_registers, prio_registers, sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7722", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index a0470f2f5479..abd1ca03f39f 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -326,8 +326,14 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups, - mask_registers, prio_registers, sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7723", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index 3b278df8a53b..3c5b629887a8 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -296,9 +296,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors, - NULL, irq_mask_registers, irq_prio_registers, - irq_sense_registers); +static struct intc_mask_reg irq_ack_registers[] __initdata = { + { 0xffd00024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors, + NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers, irq_ack_registers); /* External interrupt pins in IRL mode */ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 18dbbe23fea1..fb8200cc7440 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -217,9 +217,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_irq_desc, "sh7780-irq", irq_vectors, - NULL, irq_mask_registers, irq_prio_registers, - irq_sense_registers); +static struct intc_mask_reg irq_ack_registers[] __initdata = { + { 0xffd00024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors, + NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers, irq_ack_registers); /* External interrupt pins in IRL mode */ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 621e7329ec63..30baa63b24c8 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -238,13 +238,18 @@ static struct intc_sense_reg sense_registers[] __initdata = { IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123, - NULL, mask_registers, prio_registers, - sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xffd00024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123", + vectors_irq0123, NULL, mask_registers, + prio_registers, sense_registers, ack_registers); -static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567, - NULL, mask_registers, prio_registers, - sense_registers); +static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567", + vectors_irq4567, NULL, mask_registers, + prio_registers, sense_registers, ack_registers); /* External interrupt pins in IRL mode */ diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h index 7438d1e21bc9..d557b00111bf 100644 --- a/include/asm-sh/hw_irq.h +++ b/include/asm-sh/hw_irq.h @@ -79,7 +79,7 @@ struct intc_desc { struct intc_sense_reg *sense_regs; unsigned int nr_sense_regs; char *name; -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) struct intc_mask_reg *ack_regs; unsigned int nr_ack_regs; #endif @@ -95,7 +95,7 @@ struct intc_desc symbol __initdata = { \ chipname, \ } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) #define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \ mask_regs, prio_regs, sense_regs, ack_regs) \ struct intc_desc symbol __initdata = { \ -- cgit v1.2.3 From a4e1d08491b06b17eb77c92caacd40b330ca8146 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 7 Jul 2008 21:11:51 +0900 Subject: sh: update sh7343 code updated the following codes for SH7343: - add register_intc_controller() - add EARLY_SCIF_CONSOLE_PORT - add define of CPG register Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/Kconfig.debug | 3 +- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 135 +++++++++++++++++++++++++++++++++ include/asm-sh/cpu-sh4/freq.h | 1 + 3 files changed, 138 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 0f4549860226..36f4b1f7066d 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -36,7 +36,8 @@ config EARLY_SCIF_CONSOLE_PORT default "0xff804000" if CPU_SUBTYPE_MXG default "0xffc30000" if CPU_SUBTYPE_SHX3 default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \ - CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 + CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \ + CPU_SUBTYPE_SH7343 default "0xffe80000" if CPU_SH4 default "0xffea0000" if CPU_SUBTYPE_SH7785 default "0xfffe8000" if CPU_SUBTYPE_SH7203 diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 612002e9b261..3e3b5029599a 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -84,6 +84,141 @@ static int __init sh7343_devices_setup(void) } __initcall(sh7343_devices_setup); +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + DMAC0, DMAC1, DMAC2, DMAC3, + VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU, + MFI, VPU, TPU, Z3D4, USBI0, USBI1, + MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY, + DMAC4, DMAC5, DMAC_DADERR, + KEYSC, + SCIF, SCIF1, SCIF2, SCIF3, SCIF4, + SIOF0, SIOF1, SIO, + FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, + I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI, + I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI, + SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, + IRDA, + SDHI0, SDHI1, SDHI2, SDHI3, + CMT, TSIF, SIU, + TMU0, TMU1, TMU2, + JPU, LCDC, + + /* interrupt groups */ + + DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, SDHI, USB, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0), + INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0), + INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0), + INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820), + INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860), + INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0), + INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0), + INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980), + INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0), + INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40), + INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20), + INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60), + INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0), + INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0), + INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20), + INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60), + INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0), + INTC_VECT(SIO, 0xd00), + INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0), + INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0), + INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20), + INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60), + INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0), + INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0), + INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20), + INTC_VECT(SIU, 0xf80), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2, 0x440), + INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3), + INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU), + INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR), + INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR), + INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI, + FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), + INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI), + INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI), + INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI), + INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3), + INTC_GROUP(USB, USBI0, USBI1), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */ + { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } }, + { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */ + { 0, 0, 0, VPU, 0, 0, 0, MFI } }, + { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */ + { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } }, + { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */ + { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } }, + { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */ + { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } }, + { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */ + { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } }, + { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */ + { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI, + FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } }, + { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */ + { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } }, + { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */ + { 0, 0, 0, CMT, 0, USBI1, USBI0 } }, + { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */ + { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } }, + { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */ + { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } }, + { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } }, + { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } }, + { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } }, + { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } }, + { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } }, + { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } }, + { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } }, + { 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } }, + { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } }, + { 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } }, + { 0xa4140010, 0, 32, 4, /* INTPRI00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xa414001c, 16, 2, /* ICR1 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7343", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); + void __init plat_irq_setup(void) { + register_intc_controller(&intc_desc); } diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h index da46e67ae26d..a898105ebaba 100644 --- a/include/asm-sh/cpu-sh4/freq.h +++ b/include/asm-sh/cpu-sh4/freq.h @@ -12,6 +12,7 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7722) || \ defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7343) || \ defined(CONFIG_CPU_SUBTYPE_SH7366) #define FRQCR 0xa4150000 #define VCLKCR 0xa4150004 -- cgit v1.2.3 From cafd63b0076b78bc8f114abbeb724c7e5f5bfe5d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 7 Jul 2008 21:11:54 +0900 Subject: sh: update Solution Engine 7343 updated the following codes for Solution Endine 7343: - fix compile error in arch/sh/boards/se/7343/irq.c - add nor flash physmaps - update defconfig Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/boards/se/7343/irq.c | 232 +++--------- arch/sh/boards/se/7343/setup.c | 74 +++- arch/sh/configs/se7343_defconfig | 735 +++++++++++++++++++-------------------- include/asm-sh/se7343.h | 97 +++++- 4 files changed, 561 insertions(+), 577 deletions(-) (limited to 'include') diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c index 763f6deba814..1112e86aa93a 100644 --- a/arch/sh/boards/se/7343/irq.c +++ b/arch/sh/boards/se/7343/irq.c @@ -1,202 +1,80 @@ /* - * arch/sh/boards/se/7343/irq.c + * linux/arch/sh/boards/se/7343/irq.c * + * Copyright (C) 2008 Yoshihiro Shimoda + * + * Based on linux/arch/sh/boards/se/7722/irq.c + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include -#include #include +#include #include #include -#include +#include -static void -disable_intreq_irq(unsigned int irq) +static void disable_se7343_irq(unsigned int irq) { - int bit = irq - OFFCHIP_IRQ_BASE; - u16 val; - - val = ctrl_inw(PA_CPLD_IMSK); - val |= 1 << bit; - ctrl_outw(val, PA_CPLD_IMSK); + unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); } -static void -enable_intreq_irq(unsigned int irq) +static void enable_se7343_irq(unsigned int irq) { - int bit = irq - OFFCHIP_IRQ_BASE; - u16 val; - - val = ctrl_inw(PA_CPLD_IMSK); - val &= ~(1 << bit); - ctrl_outw(val, PA_CPLD_IMSK); + unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); } -static void -mask_and_ack_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static unsigned int -startup_intreq_irq(unsigned int irq) -{ - enable_intreq_irq(irq); - return 0; -} - -static void -shutdown_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static void -end_intreq_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - enable_intreq_irq(irq); -} - -static struct hw_interrupt_type intreq_irq_type = { - .typename = "FPGA-IRQ", - .startup = startup_intreq_irq, - .shutdown = shutdown_intreq_irq, - .enable = enable_intreq_irq, - .disable = disable_intreq_irq, - .ack = mask_and_ack_intreq_irq, - .end = end_intreq_irq +static struct irq_chip se7343_irq_chip __read_mostly = { + .name = "SE7343-FPGA", + .mask = disable_se7343_irq, + .unmask = enable_se7343_irq, + .mask_ack = disable_se7343_irq, }; -static void -make_intreq_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &intreq_irq_type; - disable_intreq_irq(irq); -} - -int -shmse_irq_demux(int irq) +static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) { - int bit; - volatile u16 val; - - if (irq == IRQ5_IRQ) { - /* Read status Register */ - val = ctrl_inw(PA_CPLD_ST); - bit = ffs(val); - if (bit != 0) - return OFFCHIP_IRQ_BASE + bit - 1; + unsigned short intv = ctrl_inw(PA_CPLD_ST); + struct irq_desc *ext_desc; + unsigned int ext_irq = SE7343_FPGA_IRQ_BASE; + + intv &= (1 << SE7343_FPGA_IRQ_NR) - 1; + + while (intv) { + if (intv & 1) { + ext_desc = irq_desc + ext_irq; + handle_level_irq(ext_irq, ext_desc); + } + intv >>= 1; + ext_irq++; } - return irq; } -/* IRQ5 is multiplexed between the following sources: - * 1. PC Card socket - * 2. Extension slot - * 3. USB Controller - * 4. Serial Controller - * - * We configure IRQ5 as a cascade IRQ. - */ -static struct irqaction irq5 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "IRQ5-cascade", -}; - -static struct ipr_data se7343_irq5_ipr_map[] = { - { IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY }, -}; -static struct ipr_data se7343_siof0_vpu_ipr_map[] = { - { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, - { VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 }, -}; -static struct ipr_data se7343_other_ipr_map[] = { - { DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, - { DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, - - /* I2C block */ - { IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - - { IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - - /* SIOF */ - { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, - - /* SIU */ - { SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY }, - - /* VIO interrupt */ - { CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - { BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - { VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - - /*MFI interrupt*/ - - { MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY }, - - /* LCD controller */ - { LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY }, -}; - /* * Initialize IRQ setting */ -void __init -init_7343se_IRQ(void) +void __init init_7343se_IRQ(void) { - /* Setup Multiplexed interrupts */ - ctrl_outw(8, PA_CPLD_MODESET); /* Set all CPLD interrupts to active - * low. - */ - /* Mask all CPLD controller interrupts */ - ctrl_outw(0x0fff, PA_CPLD_IMSK); - - /* PC Card interrupts */ - make_intreq_irq(PC_IRQ0); - make_intreq_irq(PC_IRQ1); - make_intreq_irq(PC_IRQ2); - make_intreq_irq(PC_IRQ3); - - /* Extension Slot Interrupts */ - make_intreq_irq(EXT_IRQ0); - make_intreq_irq(EXT_IRQ1); - make_intreq_irq(EXT_IRQ2); - make_intreq_irq(EXT_IRQ3); - - /* USB Controller interrupts */ - make_intreq_irq(USB_IRQ0); - make_intreq_irq(USB_IRQ1); - - /* Serial Controller interrupts */ - make_intreq_irq(UART_IRQ0); - make_intreq_irq(UART_IRQ1); - - /* Setup all external interrupts to be active low */ - ctrl_outw(0xaaaa, INTC_ICR1); - - make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map)); - - setup_irq(IRQ5_IRQ, &irq5); - /* Set port control to use IRQ5 */ - *(u16 *)0xA4050108 &= ~0xc; - - make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map)); - - ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ - - make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map)); - - ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ + int i; + + ctrl_outw(0, PA_CPLD_IMSK); /* disable all irqs */ + ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ + + for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) + set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i, + &se7343_irq_chip, + handle_level_irq, "level"); + + set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux); + set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux); + set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux); + set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux); + set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW); } diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index c9431b3a051b..59d8d94a8c29 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -1,10 +1,11 @@ #include #include +#include #include #include +#include #include - -void init_7343se_IRQ(void); +#include static struct resource smc91x_resources[] = { [0] = { @@ -17,8 +18,8 @@ static struct resource smc91x_resources[] = { * shared with other devices via externel * interrupt controller in FPGA... */ - .start = EXT_IRQ2, - .end = EXT_IRQ2, + .start = SMC_IRQ, + .end = SMC_IRQ, .flags = IORESOURCE_IRQ, }, }; @@ -38,16 +39,65 @@ static struct resource heartbeat_resources[] = { }, }; +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 128 * 1024, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = 31 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 2, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = 0x01ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + static struct platform_device *sh7343se_platform_devices[] __initdata = { &smc91x_device, &heartbeat_device, + &nor_flash_device, }; static int __init sh7343se_devices_setup(void) @@ -55,10 +105,23 @@ static int __init sh7343se_devices_setup(void) return platform_add_devices(sh7343se_platform_devices, ARRAY_SIZE(sh7343se_platform_devices)); } +device_initcall(sh7343se_devices_setup); +/* + * Initialize the board + */ static void __init sh7343se_setup(char **cmdline_p) { - device_initcall(sh7343se_devices_setup); + ctrl_outw(0xf900, FPGA_OUT); /* FPGA */ + + ctrl_outl(0x00001001, MSTPCR0); + ctrl_outl(0x00000000, MSTPCR1); + ctrl_outl(0xffffbfC0, MSTPCR2); /* LCDC, BEU, CEU, VEU, KEYSC */ + + ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */ + ctrl_outw(0x0020, PORT_PSELD); + + printk(KERN_INFO "MS7343CP01 Setup...done\n"); } /* @@ -90,5 +153,4 @@ static struct sh_machine_vector mv_7343se __initmv = { .mv_outsl = sh7343se_outsl, .mv_init_irq = init_7343se_IRQ, - .mv_irq_demux = shmse_irq_demux, }; diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index 84c0075e2ad4..7b7273638447 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -1,40 +1,55 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:46:17 2006 +# Linux kernel version: 2.6.26-rc8 +# Mon Jul 7 13:12:45 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -46,33 +61,41 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y # CONFIG_SHMEM is not set -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -86,62 +109,28 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y # # System type # -CONFIG_SOLUTION_ENGINE=y -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -CONFIG_SH_7343_SOLUTION_ENGINE=y -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SH4AL_DSP=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -150,67 +139,88 @@ CONFIG_CPU_SH4AL_DSP=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set CONFIG_CPU_SUBTYPE_SH7343=y +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x01000000 -CONFIG_32BIT=y +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_SH_FPU is not set +# CONFIG_CPU_BIG_ENDIAN is not set # CONFIG_SH_FPU_EMU is not set CONFIG_SH_DSP=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_DSP=y + +# +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_7343_SOLUTION_ENGINE=y # -# Timer support +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=27000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -225,56 +235,49 @@ CONFIG_SH_PCLK_FREQ=27000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set # # Bus options # -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_CF_ENABLER is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set -# -# PCI Hotplug Support -# - # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - # # Networking # @@ -283,22 +286,20 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -310,29 +311,18 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -345,10 +335,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -356,9 +342,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -367,36 +364,32 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -422,13 +415,15 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_PLATRAM is not set # @@ -445,130 +440,101 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support +# SCSI support type (disk, tape, CD-ROM) # +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # -# I2O device support +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs # +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# Network device support +# SCSI Transports # +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -576,13 +542,13 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -592,6 +558,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -608,6 +575,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -626,147 +594,102 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# +# CONFIG_I2C is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # -# Misc devices +# Multimedia devices # # -# Multimedia devices +# Multimedia core support # CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y # -# Video Capture Adapters +# Multimedia drivers # +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set - -# -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_EPSON1355 is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Console display driver support +# Display device support # -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# Logo configuration +# Console display driver support # +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -802,85 +725,63 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_MPU401 is not set # -# Open Sound System +# SUPERH devices # -# CONFIG_SOUND_PRIME is not set # -# USB support +# System on Chip audio support # -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_SND_SOC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# SoC Audio support for SuperH # # -# USB Gadget Support +# ALSA SoC audio for Freescale SOCs # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# SoC Audio for the Texas Instruments OMAP # -# CONFIG_MMC is not set # -# LED devices +# Open Sound System # +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_UIO is not set # # File systems # -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -909,7 +810,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -922,40 +822,39 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set +CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y +# CONFIG_NFSD_V4 is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -963,56 +862,130 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000 +CONFIG_EARLY_PRINTK=y +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Cryptographic options +# Compression # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h index e7914a54aa96..8d2af779fbc9 100644 --- a/include/asm-sh/se7343.h +++ b/include/asm-sh/se7343.h @@ -59,24 +59,95 @@ #define PA_LCD1 0xb8000000 #define PA_LCD2 0xb8800000 +#define PORT_PACR 0xA4050100 +#define PORT_PBCR 0xA4050102 +#define PORT_PCCR 0xA4050104 +#define PORT_PDCR 0xA4050106 +#define PORT_PECR 0xA4050108 +#define PORT_PFCR 0xA405010A +#define PORT_PGCR 0xA405010C +#define PORT_PHCR 0xA405010E +#define PORT_PJCR 0xA4050110 +#define PORT_PKCR 0xA4050112 +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PNCR 0xA4050118 +#define PORT_PQCR 0xA405011A +#define PORT_PRCR 0xA405011C +#define PORT_PSCR 0xA405011E +#define PORT_PTCR 0xA4050140 +#define PORT_PUCR 0xA4050142 +#define PORT_PVCR 0xA4050144 +#define PORT_PWCR 0xA4050146 +#define PORT_PYCR 0xA4050148 +#define PORT_PZCR 0xA405014A + +#define PORT_PSELA 0xA405014C +#define PORT_PSELB 0xA405014E +#define PORT_PSELC 0xA4050150 +#define PORT_PSELD 0xA4050152 +#define PORT_PSELE 0xA4050154 + +#define PORT_HIZCRA 0xA4050156 +#define PORT_HIZCRB 0xA4050158 +#define PORT_HIZCRC 0xA405015C + +#define PORT_DRVCR 0xA4050180 + +#define PORT_PADR 0xA4050120 +#define PORT_PBDR 0xA4050122 +#define PORT_PCDR 0xA4050124 +#define PORT_PDDR 0xA4050126 +#define PORT_PEDR 0xA4050128 +#define PORT_PFDR 0xA405012A +#define PORT_PGDR 0xA405012C +#define PORT_PHDR 0xA405012E +#define PORT_PJDR 0xA4050130 +#define PORT_PKDR 0xA4050132 +#define PORT_PLDR 0xA4050134 +#define PORT_PMDR 0xA4050136 +#define PORT_PNDR 0xA4050138 +#define PORT_PQDR 0xA405013A +#define PORT_PRDR 0xA405013C +#define PORT_PTDR 0xA4050160 +#define PORT_PUDR 0xA4050162 +#define PORT_PVDR 0xA4050164 +#define PORT_PWDR 0xA4050166 +#define PORT_PYDR 0xA4050168 + +#define MSTPCR0 0xA4150030 +#define MSTPCR1 0xA4150034 +#define MSTPCR2 0xA4150038 + +#define FPGA_IN 0xb1400000 +#define FPGA_OUT 0xb1400002 + #define __IO_PREFIX sh7343se #include -/* External Multiplexed interrupts */ -#define PC_IRQ0 OFFCHIP_IRQ_BASE -#define PC_IRQ1 (PC_IRQ0 + 1) -#define PC_IRQ2 (PC_IRQ1 + 1) -#define PC_IRQ3 (PC_IRQ2 + 1) +#define IRQ0_IRQ 32 +#define IRQ1_IRQ 33 +#define IRQ4_IRQ 36 +#define IRQ5_IRQ 37 + +#define SE7343_FPGA_IRQ_MRSHPC0 0 +#define SE7343_FPGA_IRQ_MRSHPC1 1 +#define SE7343_FPGA_IRQ_MRSHPC2 2 +#define SE7343_FPGA_IRQ_MRSHPC3 3 +#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */ +#define SE7343_FPGA_IRQ_USB 8 -#define EXT_IRQ0 (PC_IRQ3 + 1) -#define EXT_IRQ1 (EXT_IRQ0 + 1) -#define EXT_IRQ2 (EXT_IRQ1 + 1) -#define EXT_IRQ3 (EXT_IRQ2 + 1) +#define SE7343_FPGA_IRQ_NR 11 +#define SE7343_FPGA_IRQ_BASE 120 -#define USB_IRQ0 (EXT_IRQ3 + 1) -#define USB_IRQ1 (USB_IRQ0 + 1) +#define MRSHPC_IRQ3 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3) +#define MRSHPC_IRQ2 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2) +#define MRSHPC_IRQ1 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1) +#define MRSHPC_IRQ0 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0) +#define SMC_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC) +#define USB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB) -#define UART_IRQ0 (USB_IRQ1 + 1) -#define UART_IRQ1 (UART_IRQ0 + 1) +/* arch/sh/boards/se/7343/irq.c */ +void init_7343se_IRQ(void); #endif /* __ASM_SH_HITACHI_SE7343_H */ -- cgit v1.2.3 From 1eca5c92729a83f64826d15a9ecb1652dda54bcb Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 16 Jul 2008 19:02:54 +0900 Subject: sh: Add memory chunks to SH-Mobile UIO devices This patch adds physically contiguous memory chunks to the UIO devices. The same strategy can be used in the future for the CEU as well. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 8 ++++++++ arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 12 ++++++++++++ arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 8 ++++++++ arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 12 ++++++++++++ arch/sh/mm/consistent.c | 30 ++++++++++++++++++++++++++++++ include/asm-sh/device.h | 5 +++++ 6 files changed, 75 insertions(+) (limited to 'include') diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index bcc4255acd84..79ce34e19a2e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -66,6 +66,9 @@ static struct resource vpu_resources[] = { .end = 0xfe9022eb, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device vpu_device = { @@ -91,6 +94,9 @@ static struct resource veu_resources[] = { .end = 0xfe9200b7, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device veu_device = { @@ -132,6 +138,8 @@ static struct platform_device *sh7343_devices[] __initdata = { static int __init sh7343_devices_setup(void) { + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); + platform_resource_setup_memory(&veu_device, "veu", 2 << 20); return platform_add_devices(sh7343_devices, ARRAY_SIZE(sh7343_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 2a0fbc3ed9c2..7ee01757f3fe 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -48,6 +48,9 @@ static struct resource vpu_resources[] = { .end = 0xfe902807, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device vpu_device = { @@ -73,6 +76,9 @@ static struct resource veu0_resources[] = { .end = 0xfe9200b7, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device veu0_device = { @@ -98,6 +104,9 @@ static struct resource veu1_resources[] = { .end = 0xfe9240b7, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device veu1_device = { @@ -139,6 +148,9 @@ static struct platform_device *sh7366_devices[] __initdata = { static int __init sh7366_devices_setup(void) { + platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20); + platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20); + platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20); return platform_add_devices(sh7366_devices, ARRAY_SIZE(sh7366_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 39854d9413cf..6015f842edad 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -73,6 +73,9 @@ static struct resource vpu_resources[] = { .end = 0xfe9022eb, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device vpu_device = { @@ -98,6 +101,9 @@ static struct resource veu_resources[] = { .end = 0xfe9200b7, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device veu_device = { @@ -152,6 +158,8 @@ static struct platform_device *sh7722_devices[] __initdata = { static int __init sh7722_devices_setup(void) { + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); + platform_resource_setup_memory(&veu_device, "veu", 2 << 20); return platform_add_devices(sh7722_devices, ARRAY_SIZE(sh7722_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 1f3137ad0136..cb5e6f822e64 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -28,6 +28,9 @@ static struct resource vpu_resources[] = { .end = 0xfe902807, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device vpu_device = { @@ -53,6 +56,9 @@ static struct resource veu0_resources[] = { .end = 0xfe92027b, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device veu0_device = { @@ -78,6 +84,9 @@ static struct resource veu1_resources[] = { .end = 0xfe92427b, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device veu1_device = { @@ -221,6 +230,9 @@ static struct platform_device *sh7723_devices[] __initdata = { static int __init sh7723_devices_setup(void) { + platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20); + platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20); + platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20); return platform_add_devices(sh7723_devices, ARRAY_SIZE(sh7723_devices)); } diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index d3c33fc5b1c2..8277982d0938 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -10,6 +10,7 @@ * for more details. */ #include +#include #include #include #include @@ -185,3 +186,32 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, } } EXPORT_SYMBOL(dma_cache_sync); + +int platform_resource_setup_memory(struct platform_device *pdev, + char *name, unsigned long memsize) +{ + struct resource *r; + dma_addr_t dma_handle; + void *buf; + + r = pdev->resource + pdev->num_resources - 1; + if (r->flags) { + pr_warning("%s: unable to find empty space for resource\n", + name); + return -EINVAL; + } + + buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL); + if (!buf) { + pr_warning("%s: unable to allocate memory\n", name); + return -ENOMEM; + } + + memset(buf, 0, memsize); + + r->flags = IORESOURCE_MEM; + r->start = dma_handle; + r->end = r->start + memsize - 1; + r->name = name; + return 0; +} diff --git a/include/asm-sh/device.h b/include/asm-sh/device.h index d8f9872b0e2d..efd511d0803a 100644 --- a/include/asm-sh/device.h +++ b/include/asm-sh/device.h @@ -5,3 +5,8 @@ */ #include +struct platform_device; +/* allocate contiguous memory chunk and fill in struct resource */ +int platform_resource_setup_memory(struct platform_device *pdev, + char *name, unsigned long memsize); + -- cgit v1.2.3 From cbe9da029d9cc4fff59d559789885079a84a0af8 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 16 Jul 2008 20:21:09 +0900 Subject: sh: Renesas R0P7785LC0011RL board support This adds initial support for the Renesas R0P7785LC0011RL board. This patch supports 29bit address mode only. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 15 + arch/sh/Makefile | 1 + arch/sh/boards/renesas/sh7785lcr/Makefile | 1 + arch/sh/boards/renesas/sh7785lcr/setup.c | 302 +++++++ arch/sh/configs/sh7785lcr_defconfig | 1388 +++++++++++++++++++++++++++++ arch/sh/drivers/pci/Makefile | 1 + arch/sh/drivers/pci/fixups-sh7785lcr.c | 46 + arch/sh/drivers/pci/ops-sh7785lcr.c | 66 ++ arch/sh/tools/mach-types | 1 + include/asm-sh/sh7785lcr.h | 55 ++ 10 files changed, 1876 insertions(+) create mode 100644 arch/sh/boards/renesas/sh7785lcr/Makefile create mode 100644 arch/sh/boards/renesas/sh7785lcr/setup.c create mode 100644 arch/sh/configs/sh7785lcr_defconfig create mode 100644 arch/sh/drivers/pci/fixups-sh7785lcr.c create mode 100644 arch/sh/drivers/pci/ops-sh7785lcr.c create mode 100644 include/asm-sh/sh7785lcr.h (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5f84552ecb74..a90b73f72f30 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -495,6 +495,21 @@ config SH_HIGHLANDER select SYS_SUPPORTS_PCI select IO_TRAPPED +config SH_SH7785LCR + bool "SH7785LCR" + depends on CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI + select IO_TRAPPED + +config SH_SH7785LCR_29BIT_PHYSMAPS + bool "SH7785LCR 29bit physmaps" + depends on SH_SH7785LCR + default y + help + This board has 2 physical memory maps. It can be changed with + DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, + you can access all on-board device in 29bit address mode. + config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 1452c4df7dea..c627e45c4df7 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -124,6 +124,7 @@ machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa machdir-$(CONFIG_SH_SH7763RDP) += renesas/sh7763rdp +machdir-$(CONFIG_SH_SH7785LCR) += renesas/sh7785lcr machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev machdir-$(CONFIG_SH_LANDISK) += landisk machdir-$(CONFIG_SH_TITAN) += titan diff --git a/arch/sh/boards/renesas/sh7785lcr/Makefile b/arch/sh/boards/renesas/sh7785lcr/Makefile new file mode 100644 index 000000000000..77037567633b --- /dev/null +++ b/arch/sh/boards/renesas/sh7785lcr/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/renesas/sh7785lcr/setup.c b/arch/sh/boards/renesas/sh7785lcr/setup.c new file mode 100644 index 000000000000..b95d674ee704 --- /dev/null +++ b/arch/sh/boards/renesas/sh7785lcr/setup.c @@ -0,0 +1,302 @@ +/* + * Renesas Technology Corp. R0P7785LC0011RL Support. + * + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * NOTE: This board has 2 physical memory maps. + * Please look at include/asm-sh/sh7785lcr.h or hardware manual. + */ +static struct resource heartbeat_resources[] = { + [0] = { + .start = PLD_LEDCR, + .end = PLD_LEDCR, + .flags = IORESOURCE_MEM, + }, +}; + +static struct heartbeat_data heartbeat_data = { + .regsize = 8, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 4 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 4, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = NOR_FLASH_ADDR, + .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +static struct resource r8a66597_usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = R8A66597_ADDR, + .end = R8A66597_ADDR + R8A66597_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "r8a66597_hcd", + .start = 2, + .end = 2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device r8a66597_usb_host_device = { + .name = "r8a66597_hcd", + .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), + .resource = r8a66597_usb_host_resources, +}; + +static struct resource sm501_resources[] = { + [0] = { + .start = SM107_MEM_ADDR, + .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SM107_REG_ADDR, + .end = SM107_REG_ADDR + SM107_REG_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = 10, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct fb_videomode sm501_default_mode_crt = { + .pixclock = 35714, /* 28MHz */ + .xres = 640, + .yres = 480, + .left_margin = 105, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 39, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}; + +static struct fb_videomode sm501_default_mode_pnl = { + .pixclock = 40000, /* 25MHz */ + .xres = 640, + .yres = 480, + .left_margin = 2, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 39, + .vsync_len = 2, + .sync = 0, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = { + .def_bpp = 16, + .def_mode = &sm501_default_mode_pnl, + .flags = SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT | + SM501FB_FLAG_PANEL_NO_VBIASEN, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = { + .def_bpp = 16, + .def_mode = &sm501_default_mode_crt, + .flags = SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT, +}; + +static struct sm501_platdata_fb sm501_fb_pdata = { + .fb_route = SM501_FB_OWN, + .fb_crt = &sm501_pdata_fbsub_crt, + .fb_pnl = &sm501_pdata_fbsub_pnl, +}; + +static struct sm501_initdata sm501_initdata = { + .gpio_high = { + .set = 0x00001fe0, + .mask = 0x0, + }, + .devices = 0, + .mclk = 84 * 1000000, + .m1xclk = 112 * 1000000, +}; + +static struct sm501_platdata sm501_platform_data = { + .init = &sm501_initdata, + .fb = &sm501_fb_pdata, +}; + +static struct platform_device sm501_device = { + .name = "sm501", + .id = -1, + .dev = { + .platform_data = &sm501_platform_data, + }, + .num_resources = ARRAY_SIZE(sm501_resources), + .resource = sm501_resources, +}; + +static struct resource i2c_resources[] = { + [0] = { + .start = PCA9564_ADDR, + .end = PCA9564_ADDR + PCA9564_SIZE - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, + }, + [1] = { + .start = 12, + .end = 12, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct i2c_pca9564_pf_platform_data i2c_platform_data = { + .gpio = 0, + .i2c_clock_speed = I2C_PCA_CON_330kHz, + .timeout = 100, +}; + +static struct platform_device i2c_device = { + .name = "i2c-pca-platform", + .id = -1, + .dev = { + .platform_data = &i2c_platform_data, + }, + .num_resources = ARRAY_SIZE(i2c_resources), + .resource = i2c_resources, +}; + +static struct platform_device *sh7785lcr_devices[] __initdata = { + &heartbeat_device, + &nor_flash_device, + &r8a66597_usb_host_device, + &sm501_device, + &i2c_device, +}; + +static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = { + { + I2C_BOARD_INFO("r2025sd", 0x32), + }, +}; + +static int __init sh7785lcr_devices_setup(void) +{ + i2c_register_board_info(0, sh7785lcr_i2c_devices, + ARRAY_SIZE(sh7785lcr_i2c_devices)); + + return platform_add_devices(sh7785lcr_devices, + ARRAY_SIZE(sh7785lcr_devices)); +} +__initcall(sh7785lcr_devices_setup); + +/* Initialize IRQ setting */ +void __init init_sh7785lcr_IRQ(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ7654); + plat_irq_setup_pins(IRQ_MODE_IRQ3210); +} + +static void sh7785lcr_power_off(void) +{ + ctrl_outb(0x01, P2SEGADDR(PLD_POFCR)); +} + +/* Initialize the board */ +static void __init sh7785lcr_setup(char **cmdline_p) +{ + void __iomem *sm501_reg; + + printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n"); + + pm_power_off = sh7785lcr_power_off; + + /* sm501 DRAM configuration */ + sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL; + writel(0x000307c2, sm501_reg); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_sh7785lcr __initmv = { + .mv_name = "SH7785LCR", + .mv_setup = sh7785lcr_setup, + .mv_init_irq = init_sh7785lcr_IRQ, +}; + diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig new file mode 100644 index 000000000000..ff72697365d1 --- /dev/null +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -0,0 +1,1388 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc8 +# Tue Jul 15 21:37:59 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_NUMA=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX2=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +CONFIG_CPU_SUBTYPE_SH7785=y +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_29BIT=y +# CONFIG_PMB is not set +# CONFIG_X2TLB is not set +CONFIG_VSYSCALL=y +# CONFIG_NUMA is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=2 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +CONFIG_SH_STORE_QUEUES=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +# CONFIG_SH_HIGHLANDER is not set +CONFIG_SH_SH7785LCR=y +CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +CONFIG_I2C_PCA_PLATFORM=y +# CONFIG_I2C_SH_MOBILE is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +CONFIG_FB_SM501=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_LOGO_SUPERH_MONO is not set +# CONFIG_LOGO_SUPERH_VGA16 is not set +# CONFIG_LOGO_SUPERH_CLUT224 is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +CONFIG_USB_R8A66597_HCD=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SH is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_DEBUG_BOOTMEM is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 0718805774e8..847e90894d1b 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -23,3 +23,4 @@ obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o +obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-sh7785lcr.o diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c new file mode 100644 index 000000000000..4949e601387a --- /dev/null +++ b/arch/sh/drivers/pci/fixups-sh7785lcr.c @@ -0,0 +1,46 @@ +/* + * arch/sh/drivers/pci/fixups-sh7785lcr.c + * + * R0P7785LC0011RL PCI fixups + * Copyright (C) 2008 Yoshihiro Shimoda + * + * Based on arch/sh/drivers/pci/fixups-r7780rp.c + * Copyright (C) 2003 Lineo uSolutions, Inc. + * Copyright (C) 2004 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include "pci-sh4.h" + +int pci_fixup_pcic(void) +{ + pci_write_reg(0x000043ff, SH4_PCIINTM); + pci_write_reg(0x0000380f, SH4_PCIAINTM); + + pci_write_reg(0xfbb00047, SH7780_PCICMD); + pci_write_reg(0x00000000, SH7780_PCIIBAR); + + pci_write_reg(0x00011912, SH7780_PCISVID); + pci_write_reg(0x08000000, SH7780_PCICSCR0); + pci_write_reg(0x0000001b, SH7780_PCICSAR0); + pci_write_reg(0xfd000000, SH7780_PCICSCR1); + pci_write_reg(0x0000000f, SH7780_PCICSAR1); + + pci_write_reg(0xfd000000, SH7780_PCIMBR0); + pci_write_reg(0x00fc0000, SH7780_PCIMBMR0); + +#ifdef CONFIG_32BIT + pci_write_reg(0xc0000000, SH7780_PCIMBR2); + pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); +#endif + + /* Set IOBR for windows containing area specified in pci.h */ + pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), + SH7780_PCIIOBR); + pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR); + + return 0; +} diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c new file mode 100644 index 000000000000..b3bd68702059 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -0,0 +1,66 @@ +/* + * Author: Ian DaSilva (idasilva@mvista.com) + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Renesas R0P7785LC0011RL board + * Based on arch/sh/drivers/pci/ops-r7780rp.c + * + */ +#include +#include +#include +#include +#include +#include "pci-sh4.h" + +static char irq_tab[] __initdata = { + 65, 66, 67, 68, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return irq_tab[slot]; +} + +static struct resource sh7785_io_resource = { + .name = "SH7785_IO", + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7785_mem_resource = { + .name = "SH7785_mem", + .start = SH7780_PCI_MEMORY_BASE, + .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +struct pci_channel board_pci_channels[] = { + { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +static struct sh4_pci_address_map sh7785_pci_map = { + .window0 = { + .base = SH7780_CS2_BASE_ADDR, + .size = 0x04000000, + }, + + .window1 = { + .base = SH7780_CS3_BASE_ADDR, + .size = 0x04000000, + }, + + .flags = SH4_PCIC_NO_RESET, +}; + +int __init pcibios_init_platform(void) +{ + return sh7780_pcic_init(&sh7785_pci_map); +} diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 4473723685ca..0a11cc08f0a5 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -49,3 +49,4 @@ MIGOR SH_MIGOR RSK7203 SH_RSK7203 AP325RXA SH_AP325RXA SH7763RDP SH_SH7763RDP +SH7785LCR SH_SH7785LCR diff --git a/include/asm-sh/sh7785lcr.h b/include/asm-sh/sh7785lcr.h new file mode 100644 index 000000000000..1ce27d5c7491 --- /dev/null +++ b/include/asm-sh/sh7785lcr.h @@ -0,0 +1,55 @@ +#ifndef __ASM_SH_RENESAS_SH7785LCR_H +#define __ASM_SH_RENESAS_SH7785LCR_H + +/* + * This board has 2 physical memory maps. + * It can be changed with DIP switch(S2-5). + * + * phys address | S2-5 = OFF | S2-5 = ON + * -----------------------------+---------------+--------------- + * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash + * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD + * 0x06000000 - 0x07ffffff(CS1) | reserved | I2C + * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM + * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM + * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 + * 0x14000000 - 0x17ffffff(CS5) | I2C | USB + * 0x18000000 - 0x1bffffff(CS6) | reserved | SD + * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) + * + */ + +#define NOR_FLASH_ADDR 0x00000000 +#define NOR_FLASH_SIZE 0x04000000 + +#define PLD_BASE_ADDR 0x04000000 +#define PLD_PCICR (PLD_BASE_ADDR + 0x00) +#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) +#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) +#define PLD_POFCR (PLD_BASE_ADDR + 0x06) +#define PLD_LEDCR (PLD_BASE_ADDR + 0x08) +#define PLD_SWSR (PLD_BASE_ADDR + 0x0a) +#define PLD_VERSR (PLD_BASE_ADDR + 0x0c) +#define PLD_MMSR (PLD_BASE_ADDR + 0x0e) + +#define SM107_MEM_ADDR 0x10000000 +#define SM107_MEM_SIZE 0x00e00000 +#define SM107_REG_ADDR 0x13e00000 +#define SM107_REG_SIZE 0x00200000 + +#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) +#define R8A66597_ADDR 0x14000000 /* USB */ +#define CG200_ADDR 0x18000000 /* SD */ +#define PCA9564_ADDR 0x06000000 /* I2C */ +#else +#define R8A66597_ADDR 0x08000000 +#define CG200_ADDR 0x0c000000 +#define PCA9564_ADDR 0x14000000 +#endif + +#define R8A66597_SIZE 0x00000100 +#define CG200_SIZE 0x00010000 +#define PCA9564_SIZE 0x00000100 + +#endif /* __ASM_SH_RENESAS_SH7785LCR_H */ + -- cgit v1.2.3 From 5c8f9d94fea98596db255a579f5d02a0195abda7 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 18:48:57 +0900 Subject: sh: Add arch_flags to struct clk Add arch_flags to struct clk so we can keep per-clock private data somewhere and share code between multiple clocks. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- include/asm-sh/clock.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h index 608fda55c0ea..252f15540ddb 100644 --- a/include/asm-sh/clock.h +++ b/include/asm-sh/clock.h @@ -30,6 +30,7 @@ struct clk { unsigned long rate; unsigned long flags; + unsigned long arch_flags; }; #define CLK_ALWAYS_ENABLED (1 << 0) -- cgit v1.2.3 From aea167cbb5c9056295109e5e171d27e30e2be5bc Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 18:56:15 +0900 Subject: sh: Add SuperH Mobile MSTPCR bits to clock framework Handle module stop clock bits in MSTPCRn through the clock framework. The clocks are named after the bits in the data sheet. The association between bit number and hardware block is processor specific. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 116 +++++++++++++++++++++++++++++++++ include/asm-sh/cpu-sh4/freq.h | 3 + 2 files changed, 119 insertions(+) (limited to 'include') diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index d7b14660f737..2f50f8a1f878 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -558,6 +559,115 @@ static struct clk sh7722_video_clock = { .ops = &sh7722_video_clk_ops, }; +static int sh7722_mstpcr_start_stop(struct clk *clk, unsigned long reg, + int enable) +{ + unsigned long bit = clk->arch_flags; + unsigned long r; + + r = ctrl_inl(reg); + + if (enable) + r &= ~(1 << bit); + else + r |= (1 << bit); + + ctrl_outl(r, reg); + return 0; +} + +static void sh7722_mstpcr0_enable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR0, 1); +} + +static void sh7722_mstpcr0_disable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR0, 0); +} + +static void sh7722_mstpcr1_enable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR1, 1); +} + +static void sh7722_mstpcr1_disable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR1, 0); +} + +static void sh7722_mstpcr2_enable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR2, 1); +} + +static void sh7722_mstpcr2_disable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR2, 0); +} + +static struct clk_ops sh7722_mstpcr0_clk_ops = { + .enable = sh7722_mstpcr0_enable, + .disable = sh7722_mstpcr0_disable, +}; + +static struct clk_ops sh7722_mstpcr1_clk_ops = { + .enable = sh7722_mstpcr1_enable, + .disable = sh7722_mstpcr1_disable, +}; + +static struct clk_ops sh7722_mstpcr2_clk_ops = { + .enable = sh7722_mstpcr2_enable, + .disable = sh7722_mstpcr2_disable, +}; + +#define DECLARE_MSTPCRN(regnr, bitnr, bitstr) \ +{ \ + .name = "mstp" __stringify(regnr) bitstr, \ + .arch_flags = bitnr, \ + .ops = &sh7722_mstpcr ## regnr ## _clk_ops, \ +} + +#define DECLARE_MSTPCR(regnr) \ + DECLARE_MSTPCRN(regnr, 31, "31"), \ + DECLARE_MSTPCRN(regnr, 30, "30"), \ + DECLARE_MSTPCRN(regnr, 29, "29"), \ + DECLARE_MSTPCRN(regnr, 28, "28"), \ + DECLARE_MSTPCRN(regnr, 27, "27"), \ + DECLARE_MSTPCRN(regnr, 26, "26"), \ + DECLARE_MSTPCRN(regnr, 25, "25"), \ + DECLARE_MSTPCRN(regnr, 24, "24"), \ + DECLARE_MSTPCRN(regnr, 23, "23"), \ + DECLARE_MSTPCRN(regnr, 22, "22"), \ + DECLARE_MSTPCRN(regnr, 21, "21"), \ + DECLARE_MSTPCRN(regnr, 20, "20"), \ + DECLARE_MSTPCRN(regnr, 19, "19"), \ + DECLARE_MSTPCRN(regnr, 18, "18"), \ + DECLARE_MSTPCRN(regnr, 17, "17"), \ + DECLARE_MSTPCRN(regnr, 16, "16"), \ + DECLARE_MSTPCRN(regnr, 15, "15"), \ + DECLARE_MSTPCRN(regnr, 14, "14"), \ + DECLARE_MSTPCRN(regnr, 13, "13"), \ + DECLARE_MSTPCRN(regnr, 12, "12"), \ + DECLARE_MSTPCRN(regnr, 11, "11"), \ + DECLARE_MSTPCRN(regnr, 10, "10"), \ + DECLARE_MSTPCRN(regnr, 9, "09"), \ + DECLARE_MSTPCRN(regnr, 8, "08"), \ + DECLARE_MSTPCRN(regnr, 7, "07"), \ + DECLARE_MSTPCRN(regnr, 6, "06"), \ + DECLARE_MSTPCRN(regnr, 5, "05"), \ + DECLARE_MSTPCRN(regnr, 4, "04"), \ + DECLARE_MSTPCRN(regnr, 3, "03"), \ + DECLARE_MSTPCRN(regnr, 2, "02"), \ + DECLARE_MSTPCRN(regnr, 1, "01"), \ + DECLARE_MSTPCRN(regnr, 0, "00") + +static struct clk sh7722_mstpcr[] = { + DECLARE_MSTPCR(0), + DECLARE_MSTPCR(1), + DECLARE_MSTPCR(2), +}; + static struct clk *sh7722_clocks[] = { &sh7722_umem_clock, &sh7722_sh_clock, @@ -600,5 +710,11 @@ int __init arch_clk_init(void) clk_register(sh7722_clocks[i]); } clk_put(master); + + for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr); i++) { + pr_debug( "Registering mstpcr '%s'\n", sh7722_mstpcr[i].name); + clk_register(&sh7722_mstpcr[i]); + } + return 0; } diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h index a898105ebaba..c23af81c2e70 100644 --- a/include/asm-sh/cpu-sh4/freq.h +++ b/include/asm-sh/cpu-sh4/freq.h @@ -19,6 +19,9 @@ #define SCLKACR 0xa4150008 #define SCLKBCR 0xa415000c #define IrDACLKCR 0xa4150010 +#define MSTPCR0 0xa4150030 +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) #define FRQCR 0xffc80000 -- cgit v1.2.3 From de9254263b8c8b1809520a1009dd516e41976519 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 19:09:51 +0900 Subject: sh: Introduce clk_always_enable() function Add SuperH specific funcion clk_always_enable(), useful to enable MSTPCR bits in processor or board specific code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- include/asm-sh/clock.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include') diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h index 252f15540ddb..720dfab7b15e 100644 --- a/include/asm-sh/clock.h +++ b/include/asm-sh/clock.h @@ -5,6 +5,7 @@ #include #include #include +#include struct clk; @@ -47,6 +48,22 @@ void clk_recalc_rate(struct clk *); int clk_register(struct clk *); void clk_unregister(struct clk *); +static inline int clk_always_enable(const char *id) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, id); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = clk_enable(clk); + if (ret) + clk_put(clk); + + return ret; +} + /* the exported API, in addition to clk_set_rate */ /** * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter -- cgit v1.2.3 From 6c7d826cf6ff05264f9af04410aee82a08edfb9f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 19:16:11 +0900 Subject: sh: Use clk_always_enable() on sh7722 / Migo-R / SE7722 Use clk_always_enable() on the sh7722 processor and in the board code for Migo-R and Solution Engine 7722. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/migor/setup.c | 7 +++---- arch/sh/boards/se/7722/setup.c | 8 +++----- arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 14 ++++++++++++++ include/asm-sh/migor.h | 4 ---- include/asm-sh/se7722.h | 4 ---- 5 files changed, 20 insertions(+), 17 deletions(-) (limited to 'include') diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c index 963c99322095..91819fb61b3e 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/renesas/migor/setup.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -217,6 +218,8 @@ static struct i2c_board_info __initdata migor_i2c_devices[] = { static int __init migor_devices_setup(void) { + clk_always_enable("mstp214"); /* KEYSC */ + i2c_register_board_info(0, migor_i2c_devices, ARRAY_SIZE(migor_i2c_devices)); @@ -235,16 +238,12 @@ static void __init migor_setup(char **cmdline_p) ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA); ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA); ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC); - ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2); /* NAND Flash */ ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR); ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200, BSC_CS6ABCR); - /* I2C */ - ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1); - /* Touch Panel - Enable IRQ6 */ ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR); ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA); diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index ede3957fc14a..6e228ea59788 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -145,6 +146,8 @@ static struct platform_device *se7722_devices[] __initdata = { static int __init se7722_devices_setup(void) { + clk_always_enable("mstp214"); /* KEYSC */ + return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices)); } @@ -154,11 +157,6 @@ static void __init se7722_setup(char **cmdline_p) { ctrl_outw(0x010D, FPGA_OUT); /* FPGA */ - ctrl_outl(0x00051001, MSTPCR0); - ctrl_outl(0x00000000, MSTPCR1); - /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */ - ctrl_outl(0xffffb7c0, MSTPCR2); - ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */ ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 6015f842edad..de1ede92176e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -13,6 +13,7 @@ #include #include #include +#include #include static struct resource usbf_resources[] = { @@ -158,8 +159,21 @@ static struct platform_device *sh7722_devices[] __initdata = { static int __init sh7722_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp028"); /* URAM */ + clk_always_enable("mstp026"); /* XYMEM */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp109"); /* I2C */ + clk_always_enable("mstp211"); /* USB */ + clk_always_enable("mstp202"); /* VEU */ + clk_always_enable("mstp201"); /* VPU */ + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); platform_resource_setup_memory(&veu_device, "veu", 2 << 20); + return platform_add_devices(sh7722_devices, ARRAY_SIZE(sh7722_devices)); } diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h index 2329363afdc3..4c409a6dcfba 100644 --- a/include/asm-sh/migor.h +++ b/include/asm-sh/migor.h @@ -16,10 +16,6 @@ #include /* GPIO */ -#define MSTPCR0 0xa4150030 -#define MSTPCR1 0xa4150034 -#define MSTPCR2 0xa4150038 - #define PORT_PACR 0xa4050100 #define PORT_PDCR 0xa4050106 #define PORT_PECR 0xa4050108 diff --git a/include/asm-sh/se7722.h b/include/asm-sh/se7722.h index 3690fe5857a4..e971d9a82f4a 100644 --- a/include/asm-sh/se7722.h +++ b/include/asm-sh/se7722.h @@ -55,10 +55,6 @@ #define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */ /* GPIO */ -#define MSTPCR0 0xA4150030UL -#define MSTPCR1 0xA4150034UL -#define MSTPCR2 0xA4150038UL - #define FPGA_IN 0xb1840000UL #define FPGA_OUT 0xb1840004UL -- cgit v1.2.3 From 8fa509ab915f668093c270151f884220232bfb25 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 19:18:24 +0900 Subject: sh: Use clk_always_enable() on sh7343 / SE77343 Use clk_always_enable() on the sh7343 processor and in the board code for Solution Engine 7343. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/se/7343/setup.c | 4 ---- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 15 +++++++++++++++ include/asm-sh/se7343.h | 4 ---- 3 files changed, 15 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index 59d8d94a8c29..8ae718d6c710 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -114,10 +114,6 @@ static void __init sh7343se_setup(char **cmdline_p) { ctrl_outw(0xf900, FPGA_OUT); /* FPGA */ - ctrl_outl(0x00001001, MSTPCR0); - ctrl_outl(0x00000000, MSTPCR1); - ctrl_outl(0xffffbfC0, MSTPCR2); /* LCDC, BEU, CEU, VEU, KEYSC */ - ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */ ctrl_outw(0x0020, PORT_PSELD); diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 79ce34e19a2e..78881b4214da 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -12,6 +12,7 @@ #include #include #include +#include static struct resource iic0_resources[] = { [0] = { @@ -138,8 +139,22 @@ static struct platform_device *sh7343_devices[] __initdata = { static int __init sh7343_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp028"); /* URAM */ + clk_always_enable("mstp026"); /* XYMEM */ + clk_always_enable("mstp023"); /* INTC3 */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp109"); /* I2C0 */ + clk_always_enable("mstp108"); /* I2C1 */ + clk_always_enable("mstp202"); /* VEU */ + clk_always_enable("mstp201"); /* VPU */ + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); platform_resource_setup_memory(&veu_device, "veu", 2 << 20); + return platform_add_devices(sh7343_devices, ARRAY_SIZE(sh7343_devices)); } diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h index 8d2af779fbc9..98458460e632 100644 --- a/include/asm-sh/se7343.h +++ b/include/asm-sh/se7343.h @@ -115,10 +115,6 @@ #define PORT_PWDR 0xA4050166 #define PORT_PYDR 0xA4050168 -#define MSTPCR0 0xA4150030 -#define MSTPCR1 0xA4150034 -#define MSTPCR2 0xA4150038 - #define FPGA_IN 0xb1400000 #define FPGA_OUT 0xb1400002 -- cgit v1.2.3 From 44f95989525c48f6c79fe1c6ad07860765f987cd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 28 Jul 2008 18:34:45 +0900 Subject: sh: Wire up new syscalls. This wires up the signalfd4, eventfd2, epoll_create1, dup3, pipe2, and inotify_init1 syscalls. Signed-off-by: Paul Mundt --- arch/sh/kernel/syscalls_32.S | 6 ++++++ arch/sh/kernel/syscalls_64.S | 6 ++++++ include/asm-sh/unistd_32.h | 8 +++++++- include/asm-sh/unistd_64.h | 8 +++++++- 4 files changed, 26 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index a46cc3a41148..0af693e65764 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -343,3 +343,9 @@ ENTRY(sys_call_table) .long sys_fallocate .long sys_timerfd_settime /* 325 */ .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index d5d7843aad94..0b436aa3cad7 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -381,3 +381,9 @@ sys_call_table: .long sys_fallocate .long sys_timerfd_settime .long sys_timerfd_gettime + .long sys_signalfd4 /* 355 */ + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 + .long sys_pipe2 + .long sys_inotify_init1 /* 360 */ diff --git a/include/asm-sh/unistd_32.h b/include/asm-sh/unistd_32.h index 0b07212ec659..d52c000cf924 100644 --- a/include/asm-sh/unistd_32.h +++ b/include/asm-sh/unistd_32.h @@ -335,8 +335,14 @@ #define __NR_fallocate 324 #define __NR_timerfd_settime 325 #define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 -#define NR_syscalls 327 +#define NR_syscalls 333 #ifdef __KERNEL__ diff --git a/include/asm-sh/unistd_64.h b/include/asm-sh/unistd_64.h index 9d21eab52427..7c54e91753c1 100644 --- a/include/asm-sh/unistd_64.h +++ b/include/asm-sh/unistd_64.h @@ -375,10 +375,16 @@ #define __NR_fallocate 352 #define __NR_timerfd_settime 353 #define __NR_timerfd_gettime 354 +#define __NR_signalfd4 355 +#define __NR_eventfd2 356 +#define __NR_epoll_create1 357 +#define __NR_dup3 358 +#define __NR_pipe2 359 +#define __NR_inotify_init1 360 #ifdef __KERNEL__ -#define NR_syscalls 353 +#define NR_syscalls 361 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR -- cgit v1.2.3 From 2b4b2bb42137c779ef0084de5df66ff21b4cd86e Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Mon, 28 Jul 2008 18:36:13 +0900 Subject: sh: Workaround for __put_user_asm() bug with gcc 4.x on big-endian. I think this problem is GCC(4.1.2) bug. Syscall "getdents" returned "dirent->d_off" is always 0. I think other EB enviroment have same problem. Problem code 0c03c954 : : c03c97a: 58 f7 mov.l @(28,r15),r8 !-> offset (high) c03c97c: 59 f8 mov.l @(32,r15),r9 !-> offset (low) c03c97e: 53 f9 mov.l @(36,r15),r3 c03c980: 54 fa mov.l @(40,r15),r4 : c03c9a0: 21 82 mov.l r8,@r1 !offset(high) -> dirent->d_off It's workaround patch. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- include/asm-sh/uaccess_32.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h index ae0d24f6653f..892fd6dea9db 100644 --- a/include/asm-sh/uaccess_32.h +++ b/include/asm-sh/uaccess_32.h @@ -76,7 +76,8 @@ do { \ __put_user_asm(x, ptr, retval, "w"); \ break; \ case 4: \ - __put_user_asm(x, ptr, retval, "l"); \ + __put_user_asm((u32)x, ptr, \ + retval, "l"); \ break; \ case 8: \ __put_user_u64(x, ptr, retval); \ -- cgit v1.2.3 From 761656e6beecb38c723f207d7408c753d3103ba8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 28 Jul 2008 18:39:25 +0900 Subject: sh: Move asid_cache() out of ifdef to fix SH-3/4 nommu build. Signed-off-by: Paul Mundt --- include/asm-sh/mmu_context.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h index 87e812f68bb0..8589a50febd0 100644 --- a/include/asm-sh/mmu_context.h +++ b/include/asm-sh/mmu_context.h @@ -27,8 +27,9 @@ /* ASID is 8-bit value, so it can't be 0x100 */ #define MMU_NO_ASID 0x100 -#ifdef CONFIG_MMU #define asid_cache(cpu) (cpu_data[cpu].asid_cache) + +#ifdef CONFIG_MMU #define cpu_context(cpu, mm) ((mm)->context.id[cpu]) #define cpu_asid(cpu, mm) \ -- cgit v1.2.3 From 8b1285f1c192e7e84ba28cc25eb0e9bcf2dadb17 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 28 Jul 2008 18:47:30 +0900 Subject: sh: Add SuperH Mobile LCDC platform data for Migo-R Add WVGA and QVGA LCD panel support to Migo-R. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 1 + arch/sh/boards/renesas/migor/Kconfig | 15 +++ arch/sh/boards/renesas/migor/Makefile | 1 + arch/sh/boards/renesas/migor/lcd_qvga.c | 165 ++++++++++++++++++++++++++++++++ arch/sh/boards/renesas/migor/setup.c | 96 +++++++++++++++++++ include/asm-sh/migor.h | 6 ++ 6 files changed, 284 insertions(+) create mode 100644 arch/sh/boards/renesas/migor/Kconfig create mode 100644 arch/sh/boards/renesas/migor/lcd_qvga.c (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index a90b73f72f30..7bfb0d219d67 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -592,6 +592,7 @@ endmenu source "arch/sh/boards/renesas/rts7751r2d/Kconfig" source "arch/sh/boards/renesas/r7780rp/Kconfig" source "arch/sh/boards/renesas/sdk7780/Kconfig" +source "arch/sh/boards/renesas/migor/Kconfig" source "arch/sh/boards/magicpanelr2/Kconfig" menu "Timer and clock configuration" diff --git a/arch/sh/boards/renesas/migor/Kconfig b/arch/sh/boards/renesas/migor/Kconfig new file mode 100644 index 000000000000..a7b3b728ec3c --- /dev/null +++ b/arch/sh/boards/renesas/migor/Kconfig @@ -0,0 +1,15 @@ +if SH_MIGOR + +choice + prompt "Migo-R LCD Panel Board Selection" + default SH_MIGOR_QVGA + +config SH_MIGOR_QVGA + bool "QVGA (320x240)" + +config SH_MIGOR_RTA_WVGA + bool "RTA WVGA (800x480)" + +endchoice + +endif diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/renesas/migor/Makefile index 77037567633b..5f231dd25c0e 100644 --- a/arch/sh/boards/renesas/migor/Makefile +++ b/arch/sh/boards/renesas/migor/Makefile @@ -1 +1,2 @@ obj-y := setup.o +obj-$(CONFIG_SH_MIGOR_QVGA) += lcd_qvga.o diff --git a/arch/sh/boards/renesas/migor/lcd_qvga.c b/arch/sh/boards/renesas/migor/lcd_qvga.c new file mode 100644 index 000000000000..6e9609596448 --- /dev/null +++ b/arch/sh/boards/renesas/migor/lcd_qvga.c @@ -0,0 +1,165 @@ +/* + * Support for SuperH MigoR Quarter VGA LCD Panel + * + * Copyright (C) 2008 Magnus Damm + * + * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd. + * Copyright (c) 2007 Ujjwal Pande , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* LCD Module is a PH240320T according to board schematics. This module + * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?) + * Driver IC. This IC is connected to the SH7722 built-in LCDC using a + * SYS-80 interface configured in 16 bit mode. + * + * Index 0: "Device Code Read" returns 0x1505. + */ + +static void reset_lcd_module(void) +{ + ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR); + mdelay(2); + ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR); + mdelay(1); +} + +/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */ + +static unsigned long adjust_reg18(unsigned short data) +{ + unsigned long tmp1, tmp2; + + tmp1 = (data<<1 | 0x00000001) & 0x000001FF; + tmp2 = (data<<2 | 0x00000200) & 0x0003FE00; + return tmp1 | tmp2; +} + +static void write_reg(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg, unsigned short data) +{ + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data)); +} + +static void write_reg16(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg, unsigned short data) +{ + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); + sys_ops->write_data(sys_ops_handle, adjust_reg18(data)); +} + +static unsigned long read_reg16(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg) +{ + unsigned long data; + + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); + data = sys_ops->read_data(sys_ops_handle); + return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00); +} + +static void migor_lcd_qvga_seq(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short const *data, int no_data) +{ + int i; + + for (i = 0; i < no_data; i += 2) + write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]); +} + +static const unsigned short sync_data[] = { + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, +}; + +static const unsigned short magic0_data[] = { + 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001, + 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116, + 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8, +}; + +static const unsigned short magic1_data[] = { + 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202, + 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303, + 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102, + 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300, + 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000, + 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000, + 0x0015, 0x8000, +}; + +static const unsigned short magic2_data[] = { + 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021, +}; + +static const unsigned short magic3_data[] = { + 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061, +}; + +int migor_lcd_qvga_setup(void *board_data, void *sohandle, + struct sh_mobile_lcdc_sys_bus_ops *so) +{ + unsigned long xres = 320; + unsigned long yres = 240; + int k; + + reset_lcd_module(); + migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); + + if (read_reg16(sohandle, so, 0) != 0x1505) + return -ENODEV; + + pr_info("Migo-R QVGA LCD Module detected.\n"); + + migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); + write_reg16(sohandle, so, 0x00A4, 0x0001); + mdelay(10); + + migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data)); + mdelay(100); + + migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data)); + write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1)); + write_reg16(sohandle, so, 0x0051, 0x00ef); + write_reg16(sohandle, so, 0x0052, 0x0000); + write_reg16(sohandle, so, 0x0053, xres - 1); + + migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data)); + mdelay(10); + + migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data)); + mdelay(40); + + /* clear GRAM to avoid displaying garbage */ + + write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */ + write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */ + + for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */ + write_reg16(sohandle, so, 0x0022, 0x0000); + + write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */ + write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */ + write_reg16(sohandle, so, 0x0007, 0x0173); + mdelay(40); + + /* enable display */ + write_reg(sohandle, so, 0x00, 0x22); + mdelay(100); + return 0; +} diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c index 91819fb61b3e..28f7ab489c46 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/renesas/migor/setup.c @@ -19,6 +19,7 @@ #include #include #include +#include #include /* Address IRQ Size Bus Description @@ -199,9 +200,80 @@ static struct platform_device migor_nand_flash_device = { } }; +static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = { +#ifdef CONFIG_SH_MIGOR_RTA_WVGA + .clock_source = LCDC_CLK_BUS, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB16, + .clock_divider = 2, + .lcd_cfg = { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 64, + .right_margin = 16, + .hsync_len = 120, + .upper_margin = 1, + .lower_margin = 17, + .vsync_len = 2, + .sync = 0, + }, + } +#endif +#ifdef CONFIG_SH_MIGOR_QVGA + .clock_source = LCDC_CLK_PERIPHERAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = SYS16A, + .clock_divider = 10, + .lcd_cfg = { + .name = "PH240320T", + .xres = 320, + .yres = 240, + .left_margin = 0, + .right_margin = 16, + .hsync_len = 8, + .upper_margin = 1, + .lower_margin = 17, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT, + }, + .board_cfg = { + .setup_sys = migor_lcd_qvga_setup, + }, + .sys_bus_cfg = { + .ldmt2r = 0x06000a09, + .ldmt3r = 0x180e3418, + }, + } +#endif +}; + +static struct resource migor_lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe941fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device migor_lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(migor_lcdc_resources), + .resource = migor_lcdc_resources, + .dev = { + .platform_data = &sh_mobile_lcdc_info, + }, +}; + static struct platform_device *migor_devices[] __initdata = { &smc91x_eth_device, &sh_keysc_device, + &migor_lcdc_device, &migor_nor_flash_device, &migor_nand_flash_device, }; @@ -219,6 +291,7 @@ static struct i2c_board_info __initdata migor_i2c_devices[] = { static int __init migor_devices_setup(void) { clk_always_enable("mstp214"); /* KEYSC */ + clk_always_enable("mstp200"); /* LCDC */ i2c_register_board_info(0, migor_i2c_devices, ARRAY_SIZE(migor_i2c_devices)); @@ -248,6 +321,29 @@ static void __init migor_setup(char **cmdline_p) ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR); ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA); ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC); + +#ifdef CONFIG_SH_MIGOR_RTA_WVGA + /* LCDC - WVGA - Enable RGB Interface signals */ + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR); + ctrl_outw(0x0000, PORT_PHCR); + ctrl_outw(0x0000, PORT_PLCR); + ctrl_outw(0x0000, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR); + ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA); +#endif +#ifdef CONFIG_SH_MIGOR_QVGA + /* LCDC - QVGA - Enable SYS Interface signals */ + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR); + ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR); + ctrl_outw(0x0000, PORT_PLCR); + ctrl_outw(0x0000, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR); + ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA); +#endif } static struct sh_machine_vector mv_migor __initmv = { diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h index 4c409a6dcfba..e9f8e9b15f46 100644 --- a/include/asm-sh/migor.h +++ b/include/asm-sh/migor.h @@ -30,6 +30,7 @@ #define PORT_PYCR 0xa405014a #define PORT_PZCR 0xa405014c #define PORT_PADR 0xa4050120 +#define PORT_PHDR 0xa405012e #define PORT_PWDR 0xa4050166 #define PORT_HIZCRA 0xa4050158 @@ -51,4 +52,9 @@ #define BSC_CS6ABCR 0xfec1001c +#include + +int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + #endif /* __ASM_SH_MIGOR_H */ -- cgit v1.2.3 From 1765534c23596794385f309609c09642f33846e4 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 28 Jul 2008 18:51:01 +0900 Subject: sh: Add SuperH Mobile CEU platform data for Migo-R Add Migo-R specific platform data for on-chip sh7722 CEU and ov772x camera. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/migor/setup.c | 173 ++++++++++++++++++++++++++++++++++- include/asm-sh/migor.h | 5 + 2 files changed, 177 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c index 28f7ab489c46..7bd365ad2d06 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/renesas/migor/setup.c @@ -15,6 +15,10 @@ #include #include #include +#include +#include +#include +#include #include #include #include @@ -270,15 +274,167 @@ static struct platform_device migor_lcdc_device = { }, }; +static struct clk *camera_clk; + +static void camera_power_on(void) +{ + unsigned char value; + + camera_clk = clk_get(NULL, "video_clk"); + clk_set_rate(camera_clk, 24000000); + clk_enable(camera_clk); /* start VIO_CKO */ + + mdelay(10); + value = ctrl_inb(PORT_PTDR); + value &= ~0x09; +#ifndef CONFIG_SH_MIGOR_RTA_WVGA + value |= 0x01; +#endif + ctrl_outb(value, PORT_PTDR); + mdelay(10); + + ctrl_outb(value | 8, PORT_PTDR); +} + +static void camera_power_off(void) +{ + clk_disable(camera_clk); /* stop VIO_CKO */ + clk_put(camera_clk); + + ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR); +} + +static unsigned char camera_ov772x_magic[] = +{ + 0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01, + 0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00, + 0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07, + 0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10, + 0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0, + 0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00, + 0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00, + 0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2, + 0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80, + 0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00, + 0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50, + 0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60, + 0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a, + 0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f, + 0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00, + 0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01, + 0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f, + 0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f, + 0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70, + 0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e, + 0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69, + 0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f, + 0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4, + 0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00, + 0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f, + 0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08, + 0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e, + 0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02, + 0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06, + 0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40, + 0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff, + 0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f, + 0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50, + 0x2c, 0x78, +}; + +static int ov772x_set_capture(struct soc_camera_platform_info *info, + int enable) +{ + struct i2c_adapter *a = i2c_get_adapter(0); + struct i2c_msg msg; + int ret = 0; + int i; + + if (!enable) + return 0; /* camera_power_off() is enough */ + + for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) { + u_int8_t buf[8]; + + msg.addr = 0x21; + msg.buf = buf; + msg.len = 2; + msg.flags = 0; + + buf[0] = camera_ov772x_magic[i]; + buf[1] = camera_ov772x_magic[i + 1]; + + ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1); + } + + return ret; +} + +static struct soc_camera_platform_info ov772x_info = { + .iface = 0, + .format_name = "RGB565", + .format_depth = 16, + .format = { + .pixelformat = V4L2_PIX_FMT_RGB565, + .colorspace = V4L2_COLORSPACE_SRGB, + .width = 320, + .height = 240, + }, + .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + .set_capture = ov772x_set_capture, +}; + +static struct platform_device migor_camera_device = { + .name = "soc_camera_platform", + .dev = { + .platform_data = &ov772x_info, + }, +}; + +static struct sh_mobile_ceu_info sh_mobile_ceu_info = { + .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \ + | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH, + .enable_camera = camera_power_on, + .disable_camera = camera_power_off, +}; + +static struct resource migor_ceu_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 52, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device migor_ceu_device = { + .name = "sh_mobile_ceu", + .num_resources = ARRAY_SIZE(migor_ceu_resources), + .resource = migor_ceu_resources, + .dev = { + .platform_data = &sh_mobile_ceu_info, + }, +}; + static struct platform_device *migor_devices[] __initdata = { &smc91x_eth_device, &sh_keysc_device, &migor_lcdc_device, + &migor_ceu_device, + &migor_camera_device, &migor_nor_flash_device, &migor_nand_flash_device, }; -static struct i2c_board_info __initdata migor_i2c_devices[] = { +static struct i2c_board_info migor_i2c_devices[] = { { I2C_BOARD_INFO("rs5c372b", 0x32), }, @@ -292,6 +448,9 @@ static int __init migor_devices_setup(void) { clk_always_enable("mstp214"); /* KEYSC */ clk_always_enable("mstp200"); /* LCDC */ + clk_always_enable("mstp203"); /* CEU */ + + platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20); i2c_register_board_info(0, migor_i2c_devices, ARRAY_SIZE(migor_i2c_devices)); @@ -344,6 +503,18 @@ static void __init migor_setup(char **cmdline_p) ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB); ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA); #endif + + /* CEU */ + ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR); + ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR); + ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR); + ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR); + ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC); + ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE); + ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA); + ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB); } static struct sh_machine_vector mv_migor __initmv = { diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h index e9f8e9b15f46..10016e0f4a4e 100644 --- a/include/asm-sh/migor.h +++ b/include/asm-sh/migor.h @@ -25,12 +25,16 @@ #define PORT_PLCR 0xa4050114 #define PORT_PMCR 0xa4050116 #define PORT_PRCR 0xa405011c +#define PORT_PTCR 0xa4050140 +#define PORT_PUCR 0xa4050142 +#define PORT_PVCR 0xa4050144 #define PORT_PWCR 0xa4050146 #define PORT_PXCR 0xa4050148 #define PORT_PYCR 0xa405014a #define PORT_PZCR 0xa405014c #define PORT_PADR 0xa4050120 #define PORT_PHDR 0xa405012e +#define PORT_PTDR 0xa4050160 #define PORT_PWDR 0xa4050166 #define PORT_HIZCRA 0xa4050158 @@ -45,6 +49,7 @@ #define PORT_PSELB 0xa4050150 #define PORT_PSELC 0xa4050152 #define PORT_PSELD 0xa4050154 +#define PORT_PSELE 0xa4050156 #define PORT_HIZCRA 0xa4050158 #define PORT_HIZCRB 0xa405015a -- cgit v1.2.3