From a8135d0d79e9d0ad3a4ff494fceeaae838becf38 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 14 Dec 2015 22:47:40 +0200 Subject: dmaengine: core: Introduce new, universal API to request a channel The two API function can cover most, if not all current APIs used to request a channel. With minimal effort dmaengine drivers, platforms and dmaengine user drivers can be converted to use the two function. struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask); To request any channel matching with the requested capabilities, can be used to request channel for memcpy, memset, xor, etc where no hardware synchronization is needed. struct dma_chan *dma_request_chan(struct device *dev, const char *name); To request a slave channel. The dma_request_chan() will try to find the channel via DT, ACPI or in case if the kernel booted in non DT/ACPI mode it will use a filter lookup table and retrieves the needed information from the dma_slave_map provided by the DMA drivers. This legacy mode needs changes in platform code, in dmaengine drivers and finally the dmaengine user drivers can be converted: For each dmaengine driver an array of DMA device, slave and the parameter for the filter function needs to be added: static const struct dma_slave_map da830_edma_map[] = { { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) }, { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) }, { "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) }, { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) }, { "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) }, { "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) }, { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) }, { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) }, { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) }, { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) }, { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) }, { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) }, }; This information is going to be needed by the dmaengine driver, so modification to the platform_data is needed, and the driver map should be added to the pdata of the DMA driver: da8xx_edma0_pdata.slave_map = da830_edma_map; da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map); The DMA driver then needs to configure the needed device -> filter_fn mapping before it registers with dma_async_device_register() : ecc->dma_slave.filter_map.map = info->slave_map; ecc->dma_slave.filter_map.mapcnt = info->slavecnt; ecc->dma_slave.filter_map.fn = edma_filter_fn; When neither DT or ACPI lookup is available the dma_request_chan() will try to match the requester's device name with the filter_map's list of device names, when a match found it will use the information from the dma_slave_map to get the channel with the dma_get_channel() internal function. Signed-off-by: Peter Ujfalusi Reviewed-by: Arnd Bergmann Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 51 ++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 44 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index c47c68e535e8..d50a6b51a73d 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -606,12 +606,39 @@ enum dmaengine_alignment { DMAENGINE_ALIGN_64_BYTES = 6, }; +/** + * struct dma_slave_map - associates slave device and it's slave channel with + * parameter to be used by a filter function + * @devname: name of the device + * @slave: slave channel name + * @param: opaque parameter to pass to struct dma_filter.fn + */ +struct dma_slave_map { + const char *devname; + const char *slave; + void *param; +}; + +/** + * struct dma_filter - information for slave device/channel to filter_fn/param + * mapping + * @fn: filter function callback + * @mapcnt: number of slave device/channel in the map + * @map: array of channel to filter mapping data + */ +struct dma_filter { + dma_filter_fn fn; + int mapcnt; + const struct dma_slave_map *map; +}; + /** * struct dma_device - info on the entity supplying DMA services * @chancnt: how many DMA channels are supported * @privatecnt: how many DMA channels are requested by dma_request_channel * @channels: the list of struct dma_chan * @global_node: list_head for global dma_device_list + * @filter: information for device/slave to filter function/param mapping * @cap_mask: one or more dma_capability flags * @max_xor: maximum number of xor sources, 0 if no capability * @max_pq: maximum number of PQ sources and PQ-continue capability @@ -666,6 +693,7 @@ struct dma_device { unsigned int privatecnt; struct list_head channels; struct list_head global_node; + struct dma_filter filter; dma_cap_mask_t cap_mask; unsigned short max_xor; unsigned short max_pq; @@ -1140,9 +1168,11 @@ enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); void dma_issue_pending_all(void); struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param); -struct dma_chan *dma_request_slave_channel_reason(struct device *dev, - const char *name); struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name); + +struct dma_chan *dma_request_chan(struct device *dev, const char *name); +struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask); + void dma_release_channel(struct dma_chan *chan); int dma_get_slave_caps(struct dma_chan *chan, struct dma_slave_caps *caps); #else @@ -1166,16 +1196,21 @@ static inline struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, { return NULL; } -static inline struct dma_chan *dma_request_slave_channel_reason( - struct device *dev, const char *name) -{ - return ERR_PTR(-ENODEV); -} static inline struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name) { return NULL; } +static inline struct dma_chan *dma_request_chan(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENODEV); +} +static inline struct dma_chan *dma_request_chan_by_mask( + const dma_cap_mask_t *mask) +{ + return ERR_PTR(-ENODEV); +} static inline void dma_release_channel(struct dma_chan *chan) { } @@ -1186,6 +1221,8 @@ static inline int dma_get_slave_caps(struct dma_chan *chan, } #endif +#define dma_request_slave_channel_reason(dev, name) dma_request_chan(dev, name) + static inline int dmaengine_desc_set_reuse(struct dma_async_tx_descriptor *tx) { struct dma_slave_caps caps; -- cgit v1.2.3 From 23e6723c060faf5a0fc8d7bfbec440d29943fa99 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 14 Dec 2015 22:47:41 +0200 Subject: dmaengine: edma: Add support for DMA filter mapping to slave devices Add support for providing device to filter_fn mapping so client drivers can switch to use the dma_request_chan() API. Signed-off-by: Peter Ujfalusi Reviewed-by: Arnd Bergmann Signed-off-by: Vinod Koul --- drivers/dma/edma.c | 4 ++++ include/linux/platform_data/edma.h | 7 +++++++ 2 files changed, 11 insertions(+) (limited to 'include') diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index 6b03e4e84e6b..c7a011f4b860 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -2297,6 +2297,10 @@ static int edma_probe(struct platform_device *pdev) edma_set_chmap(&ecc->slave_chans[i], ecc->dummy_slot); } + ecc->dma_slave.filter.map = info->slave_map; + ecc->dma_slave.filter.mapcnt = info->slavecnt; + ecc->dma_slave.filter.fn = edma_filter_fn; + ret = dma_async_device_register(&ecc->dma_slave); if (ret) { dev_err(dev, "slave ddev registration failed (%d)\n", ret); diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index e2878baeb90e..105700e62ea1 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -53,12 +53,16 @@ enum dma_event_q { #define EDMA_CTLR(i) ((i) >> 16) #define EDMA_CHAN_SLOT(i) ((i) & 0xffff) +#define EDMA_FILTER_PARAM(ctlr, chan) ((int[]) { EDMA_CTLR_CHAN(ctlr, chan) }) + struct edma_rsv_info { const s16 (*rsv_chans)[2]; const s16 (*rsv_slots)[2]; }; +struct dma_slave_map; + /* platform_data for EDMA driver */ struct edma_soc_info { /* @@ -76,6 +80,9 @@ struct edma_soc_info { s8 (*queue_priority_mapping)[2]; const s16 (*xbar_chans)[2]; + + const struct dma_slave_map *slave_map; + int slavecnt; }; #endif -- cgit v1.2.3 From 020c62ae38946cae01571a0b4e6f445dfdb7ec1c Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 14 Dec 2015 22:47:42 +0200 Subject: dmaengine: omap-dma: Add support for DMA filter mapping to slave devices Add support for providing device to filter_fn mapping so client drivers can switch to use the dma_request_chan() API. Signed-off-by: Peter Ujfalusi Reviewed-by: Arnd Bergmann Signed-off-by: Vinod Koul --- drivers/dma/omap-dma.c | 4 ++++ include/linux/omap-dma.h | 6 ++++++ 2 files changed, 10 insertions(+) (limited to 'include') diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index 1dfc71c90123..48f77c289cd3 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -1203,6 +1203,10 @@ static int omap_dma_probe(struct platform_device *pdev) return rc; } + od->ddev.filter.map = od->plat->slave_map; + od->ddev.filter.mapcnt = od->plat->slavecnt; + od->ddev.filter.fn = omap_dma_filter_fn; + rc = dma_async_device_register(&od->ddev); if (rc) { pr_warn("OMAP-DMA: failed to register slave DMA engine device: %d\n", diff --git a/include/linux/omap-dma.h b/include/linux/omap-dma.h index 88fa8af2b937..1d99b61adc65 100644 --- a/include/linux/omap-dma.h +++ b/include/linux/omap-dma.h @@ -267,6 +267,9 @@ struct omap_dma_reg { u8 type; }; +#define SDMA_FILTER_PARAM(hw_req) ((int[]) { (hw_req) }) +struct dma_slave_map; + /* System DMA platform data structure */ struct omap_system_dma_plat_info { const struct omap_dma_reg *reg_map; @@ -278,6 +281,9 @@ struct omap_system_dma_plat_info { void (*clear_dma)(int lch); void (*dma_write)(u32 val, int reg, int lch); u32 (*dma_read)(int reg, int lch); + + const struct dma_slave_map *slave_map; + int slavecnt; }; #ifdef CONFIG_ARCH_OMAP2PLUS -- cgit v1.2.3