From f7bc6e42bf12487182fc442a08eca25d968dc543 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Aug 2019 09:25:00 +0200 Subject: drivers: remove the SGI SN2 IOC4 base support The IOC4 is a multi-function chip seen on SGI SN2 and some SGI MIPS systems. This removes the base driver, which while not having an SN2 Kconfig dependency was only for sub-drivers that had one. Signed-off-by: Christoph Hellwig Link: https://lkml.kernel.org/r/20190813072514.23299-15-hch@lst.de Signed-off-by: Tony Luck --- include/linux/ioc4.h | 184 ------------------------------------------------ include/linux/pci_ids.h | 1 - 2 files changed, 185 deletions(-) delete mode 100644 include/linux/ioc4.h (limited to 'include') diff --git a/include/linux/ioc4.h b/include/linux/ioc4.h deleted file mode 100644 index 51e2b9fb6372..000000000000 --- a/include/linux/ioc4.h +++ /dev/null @@ -1,184 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2005 Silicon Graphics, Inc. All Rights Reserved. - */ - -#ifndef _LINUX_IOC4_H -#define _LINUX_IOC4_H - -#include - -/*************** - * Definitions * - ***************/ - -/* Miscellaneous values inherent to hardware */ - -#define IOC4_EXTINT_COUNT_DIVISOR 520 /* PCI clocks per COUNT tick */ - -/*********************************** - * Structures needed by subdrivers * - ***********************************/ - -/* This structure fully describes the IOC4 miscellaneous registers which - * appear at bar[0]+0x00000 through bar[0]+0x0005c. The corresponding - * PCI resource is managed by the main IOC4 driver because it contains - * registers of interest to many different IOC4 subdrivers. - */ -struct ioc4_misc_regs { - /* Miscellaneous IOC4 registers */ - union ioc4_pci_err_addr_l { - uint32_t raw; - struct { - uint32_t valid:1; /* Address captured */ - uint32_t master_id:4; /* Unit causing error - * 0/1: Serial port 0 TX/RX - * 2/3: Serial port 1 TX/RX - * 4/5: Serial port 2 TX/RX - * 6/7: Serial port 3 TX/RX - * 8: ATA/ATAPI - * 9-15: Undefined - */ - uint32_t mul_err:1; /* Multiple errors occurred */ - uint32_t addr:26; /* Bits 31-6 of error addr */ - } fields; - } pci_err_addr_l; - uint32_t pci_err_addr_h; /* Bits 63-32 of error addr */ - union ioc4_sio_int { - uint32_t raw; - struct { - uint8_t tx_mt:1; /* TX ring buffer empty */ - uint8_t rx_full:1; /* RX ring buffer full */ - uint8_t rx_high:1; /* RX high-water exceeded */ - uint8_t rx_timer:1; /* RX timer has triggered */ - uint8_t delta_dcd:1; /* DELTA_DCD seen */ - uint8_t delta_cts:1; /* DELTA_CTS seen */ - uint8_t intr_pass:1; /* Interrupt pass-through */ - uint8_t tx_explicit:1; /* TX, MCW, or delay complete */ - } fields[4]; - } sio_ir; /* Serial interrupt state */ - union ioc4_other_int { - uint32_t raw; - struct { - uint32_t ata_int:1; /* ATA port passthru */ - uint32_t ata_memerr:1; /* ATA halted by mem error */ - uint32_t memerr:4; /* Serial halted by mem err */ - uint32_t kbd_int:1; /* kbd/mouse intr asserted */ - uint32_t reserved:16; /* zero */ - uint32_t rt_int:1; /* INT_OUT section latch */ - uint32_t gen_int:8; /* Intr. from generic pins */ - } fields; - } other_ir; /* Other interrupt state */ - union ioc4_sio_int sio_ies; /* Serial interrupt enable set */ - union ioc4_other_int other_ies; /* Other interrupt enable set */ - union ioc4_sio_int sio_iec; /* Serial interrupt enable clear */ - union ioc4_other_int other_iec; /* Other interrupt enable clear */ - union ioc4_sio_cr { - uint32_t raw; - struct { - uint32_t cmd_pulse:4; /* Bytebus strobe width */ - uint32_t arb_diag:3; /* PCI bus requester */ - uint32_t sio_diag_idle:1; /* Active ser req? */ - uint32_t ata_diag_idle:1; /* Active ATA req? */ - uint32_t ata_diag_active:1; /* ATA req is winner */ - uint32_t reserved:22; /* zero */ - } fields; - } sio_cr; - uint32_t unused1; - union ioc4_int_out { - uint32_t raw; - struct { - uint32_t count:16; /* Period control */ - uint32_t mode:3; /* Output signal shape */ - uint32_t reserved:11; /* zero */ - uint32_t diag:1; /* Timebase control */ - uint32_t int_out:1; /* Current value */ - } fields; - } int_out; /* External interrupt output control */ - uint32_t unused2; - union ioc4_gpcr { - uint32_t raw; - struct { - uint32_t dir:8; /* Pin direction */ - uint32_t edge:8; /* Edge/level mode */ - uint32_t reserved1:4; /* zero */ - uint32_t int_out_en:1; /* INT_OUT enable */ - uint32_t reserved2:11; /* zero */ - } fields; - } gpcr_s; /* Generic PIO control set */ - union ioc4_gpcr gpcr_c; /* Generic PIO control clear */ - union ioc4_gpdr { - uint32_t raw; - struct { - uint32_t gen_pin:8; /* State of pins */ - uint32_t reserved:24; - } fields; - } gpdr; /* Generic PIO data */ - uint32_t unused3; - union ioc4_gppr { - uint32_t raw; - struct { - uint32_t gen_pin:1; /* Single pin state */ - uint32_t reserved:31; - } fields; - } gppr[8]; /* Generic PIO pins */ -}; - -/* Masks for GPCR DIR pins */ -#define IOC4_GPCR_DIR_0 0x01 /* External interrupt output */ -#define IOC4_GPCR_DIR_1 0x02 /* External interrupt input */ -#define IOC4_GPCR_DIR_2 0x04 -#define IOC4_GPCR_DIR_3 0x08 /* Keyboard/mouse presence */ -#define IOC4_GPCR_DIR_4 0x10 /* Ser. port 0 xcvr select (0=232, 1=422) */ -#define IOC4_GPCR_DIR_5 0x20 /* Ser. port 1 xcvr select (0=232, 1=422) */ -#define IOC4_GPCR_DIR_6 0x40 /* Ser. port 2 xcvr select (0=232, 1=422) */ -#define IOC4_GPCR_DIR_7 0x80 /* Ser. port 3 xcvr select (0=232, 1=422) */ - -/* Masks for GPCR EDGE pins */ -#define IOC4_GPCR_EDGE_0 0x01 -#define IOC4_GPCR_EDGE_1 0x02 /* External interrupt input */ -#define IOC4_GPCR_EDGE_2 0x04 -#define IOC4_GPCR_EDGE_3 0x08 -#define IOC4_GPCR_EDGE_4 0x10 -#define IOC4_GPCR_EDGE_5 0x20 -#define IOC4_GPCR_EDGE_6 0x40 -#define IOC4_GPCR_EDGE_7 0x80 - -#define IOC4_VARIANT_IO9 0x0900 -#define IOC4_VARIANT_PCI_RT 0x0901 -#define IOC4_VARIANT_IO10 0x1000 - -/* One of these per IOC4 */ -struct ioc4_driver_data { - struct list_head idd_list; - unsigned long idd_bar0; - struct pci_dev *idd_pdev; - const struct pci_device_id *idd_pci_id; - struct ioc4_misc_regs __iomem *idd_misc_regs; - unsigned long count_period; - void *idd_serial_data; - unsigned int idd_variant; -}; - -/* One per submodule */ -struct ioc4_submodule { - struct list_head is_list; - char *is_name; - struct module *is_owner; - int (*is_probe) (struct ioc4_driver_data *); - int (*is_remove) (struct ioc4_driver_data *); -}; - -#define IOC4_NUM_CARDS 8 /* max cards per partition */ - -/********************************** - * Functions needed by submodules * - **********************************/ - -extern int ioc4_register_submodule(struct ioc4_submodule *); -extern void ioc4_unregister_submodule(struct ioc4_submodule *); - -#endif /* _LINUX_IOC4_H */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index c842735a4f45..85e2ca611d42 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1070,7 +1070,6 @@ #define PCI_VENDOR_ID_SGI 0x10a9 #define PCI_DEVICE_ID_SGI_IOC3 0x0003 #define PCI_DEVICE_ID_SGI_LITHIUM 0x1002 -#define PCI_DEVICE_ID_SGI_IOC4 0x100a #define PCI_VENDOR_ID_WINBOND 0x10ad #define PCI_DEVICE_ID_WINBOND_82C105 0x0105 -- cgit v1.2.3