From d0f949e220fdf5ed1033e9f6e80749b05f2e7b70 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Fri, 20 Jan 2017 10:15:03 +0100 Subject: mfd: Add STM32 Timers driver This hardware block could at used at same time for PWM generation and IIO timers. PWM and IIO timer configuration are mixed in the same registers so we need a multi fonction driver to be able to share those registers. version 7: - rebase on v4.10-rc2 version 6: - rename files to stm32-timers - rename functions to stm32_timers_xxx version 5: - fix Lee comments about detect function - add missing dependency on REGMAP_MMIO version 4: - add a function to detect Auto Reload Register (ARR) size - rename the structure shared with other drivers version 2: - rename driver "stm32-gptimer" to be align with SoC documentation - only keep one compatible - use of_platform_populate() instead of devm_mfd_add_devices() Signed-off-by: Benjamin Gaignard Acked-by: Rob Herring Signed-off-by: Lee Jones --- include/linux/mfd/stm32-timers.h | 71 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 include/linux/mfd/stm32-timers.h (limited to 'include') diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h new file mode 100644 index 000000000000..d0300045f04a --- /dev/null +++ b/include/linux/mfd/stm32-timers.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) STMicroelectronics 2016 + * + * Author: Benjamin Gaignard + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _LINUX_STM32_GPTIMER_H_ +#define _LINUX_STM32_GPTIMER_H_ + +#include +#include + +#define TIM_CR1 0x00 /* Control Register 1 */ +#define TIM_CR2 0x04 /* Control Register 2 */ +#define TIM_SMCR 0x08 /* Slave mode control reg */ +#define TIM_DIER 0x0C /* DMA/interrupt register */ +#define TIM_SR 0x10 /* Status register */ +#define TIM_EGR 0x14 /* Event Generation Reg */ +#define TIM_CCMR1 0x18 /* Capt/Comp 1 Mode Reg */ +#define TIM_CCMR2 0x1C /* Capt/Comp 2 Mode Reg */ +#define TIM_CCER 0x20 /* Capt/Comp Enable Reg */ +#define TIM_PSC 0x28 /* Prescaler */ +#define TIM_ARR 0x2c /* Auto-Reload Register */ +#define TIM_CCR1 0x34 /* Capt/Comp Register 1 */ +#define TIM_CCR2 0x38 /* Capt/Comp Register 2 */ +#define TIM_CCR3 0x3C /* Capt/Comp Register 3 */ +#define TIM_CCR4 0x40 /* Capt/Comp Register 4 */ +#define TIM_BDTR 0x44 /* Break and Dead-Time Reg */ + +#define TIM_CR1_CEN BIT(0) /* Counter Enable */ +#define TIM_CR1_ARPE BIT(7) /* Auto-reload Preload Ena */ +#define TIM_CR2_MMS (BIT(4) | BIT(5) | BIT(6)) /* Master mode selection */ +#define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */ +#define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */ +#define TIM_DIER_UIE BIT(0) /* Update interrupt */ +#define TIM_SR_UIF BIT(0) /* Update interrupt flag */ +#define TIM_EGR_UG BIT(0) /* Update Generation */ +#define TIM_CCMR_PE BIT(3) /* Channel Preload Enable */ +#define TIM_CCMR_M1 (BIT(6) | BIT(5)) /* Channel PWM Mode 1 */ +#define TIM_CCER_CC1E BIT(0) /* Capt/Comp 1 out Ena */ +#define TIM_CCER_CC1P BIT(1) /* Capt/Comp 1 Polarity */ +#define TIM_CCER_CC1NE BIT(2) /* Capt/Comp 1N out Ena */ +#define TIM_CCER_CC1NP BIT(3) /* Capt/Comp 1N Polarity */ +#define TIM_CCER_CC2E BIT(4) /* Capt/Comp 2 out Ena */ +#define TIM_CCER_CC3E BIT(8) /* Capt/Comp 3 out Ena */ +#define TIM_CCER_CC4E BIT(12) /* Capt/Comp 4 out Ena */ +#define TIM_CCER_CCXE (BIT(0) | BIT(4) | BIT(8) | BIT(12)) +#define TIM_BDTR_BKE BIT(12) /* Break input enable */ +#define TIM_BDTR_BKP BIT(13) /* Break input polarity */ +#define TIM_BDTR_AOE BIT(14) /* Automatic Output Enable */ +#define TIM_BDTR_MOE BIT(15) /* Main Output Enable */ +#define TIM_BDTR_BKF (BIT(16) | BIT(17) | BIT(18) | BIT(19)) +#define TIM_BDTR_BK2F (BIT(20) | BIT(21) | BIT(22) | BIT(23)) +#define TIM_BDTR_BK2E BIT(24) /* Break 2 input enable */ +#define TIM_BDTR_BK2P BIT(25) /* Break 2 input polarity */ + +#define MAX_TIM_PSC 0xFFFF +#define TIM_CR2_MMS_SHIFT 4 +#define TIM_SMCR_TS_SHIFT 4 +#define TIM_BDTR_BKF_MASK 0xF +#define TIM_BDTR_BKF_SHIFT 16 +#define TIM_BDTR_BK2F_SHIFT 20 + +struct stm32_timers { + struct clk *clk; + struct regmap *regmap; + u32 max_arr; +}; +#endif -- cgit v1.2.3 From 93fbe91b552194af970256ce72934745d01df435 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Fri, 20 Jan 2017 10:15:07 +0100 Subject: iio: Add STM32 timer trigger driver Timers IPs can be used to generate triggers for other IPs like DAC or ADC. Each trigger may result of timer internals signals like counter enable, reset or edge, this configuration could be done through "master_mode" device attribute. Since triggers could be used by DAC or ADC their names are defined in include/ nux/iio/timer/stm32-timer-trigger.h and is_stm32_iio_timer_trigger function could be used to check if the trigger is valid or not. "trgo" trigger have a "sampling_frequency" attribute which allow to configure timer sampling frequency. version 8: - change kernel version from 4.10 to 4.11 in ABI documentation version 7: - remove all iio_device related code - move driver into trigger directory version 5: - simplify tables of triggers - only create an IIO device when needed version 4: - get triggers configuration from "reg" in DT - add tables of triggers - sampling frequency is enable/disable when writing in trigger sampling_frequency attribute - no more use of interruptions version 3: - change compatible to "st,stm32-timer-trigger" - fix attributes access right - use string instead of int for master_mode and slave_mode - document device attributes in sysfs-bus-iio-timer-stm32 version 2: - keep only one compatible - use st,input-triggers-names and st,output-triggers-names to know which triggers are accepted and/or create by the device Signed-off-by: Benjamin Gaignard Acked-by: Jonathan Cameron Signed-off-by: Lee Jones --- .../ABI/testing/sysfs-bus-iio-timer-stm32 | 29 ++ drivers/iio/trigger/Kconfig | 9 + drivers/iio/trigger/Makefile | 1 + drivers/iio/trigger/stm32-timer-trigger.c | 342 +++++++++++++++++++++ include/linux/iio/timer/stm32-timer-trigger.h | 62 ++++ 5 files changed, 443 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 create mode 100644 drivers/iio/trigger/stm32-timer-trigger.c create mode 100644 include/linux/iio/timer/stm32-timer-trigger.h (limited to 'include') diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 new file mode 100644 index 000000000000..6534a60037ff --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 @@ -0,0 +1,29 @@ +What: /sys/bus/iio/devices/triggerX/master_mode_available +KernelVersion: 4.11 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the list possible master modes which are: + - "reset" : The UG bit from the TIMx_EGR register is used as trigger output (TRGO). + - "enable" : The Counter Enable signal CNT_EN is used as trigger output. + - "update" : The update event is selected as trigger output. + For instance a master timer can then be used as a prescaler for a slave timer. + - "compare_pulse" : The trigger output send a positive pulse when the CC1IF flag is to be set. + - "OC1REF" : OC1REF signal is used as trigger output. + - "OC2REF" : OC2REF signal is used as trigger output. + - "OC3REF" : OC3REF signal is used as trigger output. + - "OC4REF" : OC4REF signal is used as trigger output. + +What: /sys/bus/iio/devices/triggerX/master_mode +KernelVersion: 4.11 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the current master modes. + Writing set the master mode + +What: /sys/bus/iio/devices/triggerX/sampling_frequency +KernelVersion: 4.11 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the current sampling frequency. + Writing an value different of 0 set and start sampling. + Writing 0 stop sampling. diff --git a/drivers/iio/trigger/Kconfig b/drivers/iio/trigger/Kconfig index 809b2e7d58fa..e4d4e63434db 100644 --- a/drivers/iio/trigger/Kconfig +++ b/drivers/iio/trigger/Kconfig @@ -24,6 +24,15 @@ config IIO_INTERRUPT_TRIGGER To compile this driver as a module, choose M here: the module will be called iio-trig-interrupt. +config IIO_STM32_TIMER_TRIGGER + tristate "STM32 Timer Trigger" + depends on (ARCH_STM32 && OF && MFD_STM32_TIMERS) || COMPILE_TEST + help + Select this option to enable STM32 Timer Trigger + + To compile this driver as a module, choose M here: the + module will be called stm32-timer-trigger. + config IIO_TIGHTLOOP_TRIGGER tristate "A kthread based hammering loop trigger" depends on IIO_SW_TRIGGER diff --git a/drivers/iio/trigger/Makefile b/drivers/iio/trigger/Makefile index aab4dc23303d..5c4ecd380653 100644 --- a/drivers/iio/trigger/Makefile +++ b/drivers/iio/trigger/Makefile @@ -6,5 +6,6 @@ obj-$(CONFIG_IIO_HRTIMER_TRIGGER) += iio-trig-hrtimer.o obj-$(CONFIG_IIO_INTERRUPT_TRIGGER) += iio-trig-interrupt.o +obj-$(CONFIG_IIO_STM32_TIMER_TRIGGER) += stm32-timer-trigger.o obj-$(CONFIG_IIO_SYSFS_TRIGGER) += iio-trig-sysfs.o obj-$(CONFIG_IIO_TIGHTLOOP_TRIGGER) += iio-trig-loop.o diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c new file mode 100644 index 000000000000..994b96d19750 --- /dev/null +++ b/drivers/iio/trigger/stm32-timer-trigger.c @@ -0,0 +1,342 @@ +/* + * Copyright (C) STMicroelectronics 2016 + * + * Author: Benjamin Gaignard + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#include +#include +#include +#include +#include +#include +#include + +#define MAX_TRIGGERS 6 + +/* List the triggers created by each timer */ +static const void *triggers_table[][MAX_TRIGGERS] = { + { TIM1_TRGO, TIM1_CH1, TIM1_CH2, TIM1_CH3, TIM1_CH4,}, + { TIM2_TRGO, TIM2_CH1, TIM2_CH2, TIM2_CH3, TIM2_CH4,}, + { TIM3_TRGO, TIM3_CH1, TIM3_CH2, TIM3_CH3, TIM3_CH4,}, + { TIM4_TRGO, TIM4_CH1, TIM4_CH2, TIM4_CH3, TIM4_CH4,}, + { TIM5_TRGO, TIM5_CH1, TIM5_CH2, TIM5_CH3, TIM5_CH4,}, + { TIM6_TRGO,}, + { TIM7_TRGO,}, + { TIM8_TRGO, TIM8_CH1, TIM8_CH2, TIM8_CH3, TIM8_CH4,}, + { TIM9_TRGO, TIM9_CH1, TIM9_CH2,}, + { }, /* timer 10 */ + { }, /* timer 11 */ + { TIM12_TRGO, TIM12_CH1, TIM12_CH2,}, +}; + +struct stm32_timer_trigger { + struct device *dev; + struct regmap *regmap; + struct clk *clk; + u32 max_arr; + const void *triggers; +}; + +static int stm32_timer_start(struct stm32_timer_trigger *priv, + unsigned int frequency) +{ + unsigned long long prd, div; + int prescaler = 0; + u32 ccer, cr1; + + /* Period and prescaler values depends of clock rate */ + div = (unsigned long long)clk_get_rate(priv->clk); + + do_div(div, frequency); + + prd = div; + + /* + * Increase prescaler value until we get a result that fit + * with auto reload register maximum value. + */ + while (div > priv->max_arr) { + prescaler++; + div = prd; + do_div(div, (prescaler + 1)); + } + prd = div; + + if (prescaler > MAX_TIM_PSC) { + dev_err(priv->dev, "prescaler exceeds the maximum value\n"); + return -EINVAL; + } + + /* Check if nobody else use the timer */ + regmap_read(priv->regmap, TIM_CCER, &ccer); + if (ccer & TIM_CCER_CCXE) + return -EBUSY; + + regmap_read(priv->regmap, TIM_CR1, &cr1); + if (!(cr1 & TIM_CR1_CEN)) + clk_enable(priv->clk); + + regmap_write(priv->regmap, TIM_PSC, prescaler); + regmap_write(priv->regmap, TIM_ARR, prd - 1); + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, TIM_CR1_ARPE); + + /* Force master mode to update mode */ + regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS, 0x20); + + /* Make sure that registers are updated */ + regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG); + + /* Enable controller */ + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, TIM_CR1_CEN); + + return 0; +} + +static void stm32_timer_stop(struct stm32_timer_trigger *priv) +{ + u32 ccer, cr1; + + regmap_read(priv->regmap, TIM_CCER, &ccer); + if (ccer & TIM_CCER_CCXE) + return; + + regmap_read(priv->regmap, TIM_CR1, &cr1); + if (cr1 & TIM_CR1_CEN) + clk_disable(priv->clk); + + /* Stop timer */ + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0); + regmap_write(priv->regmap, TIM_PSC, 0); + regmap_write(priv->regmap, TIM_ARR, 0); + + /* Make sure that registers are updated */ + regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG); +} + +static ssize_t stm32_tt_store_frequency(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_trigger *trig = to_iio_trigger(dev); + struct stm32_timer_trigger *priv = iio_trigger_get_drvdata(trig); + unsigned int freq; + int ret; + + ret = kstrtouint(buf, 10, &freq); + if (ret) + return ret; + + if (freq == 0) { + stm32_timer_stop(priv); + } else { + ret = stm32_timer_start(priv, freq); + if (ret) + return ret; + } + + return len; +} + +static ssize_t stm32_tt_read_frequency(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iio_trigger *trig = to_iio_trigger(dev); + struct stm32_timer_trigger *priv = iio_trigger_get_drvdata(trig); + u32 psc, arr, cr1; + unsigned long long freq = 0; + + regmap_read(priv->regmap, TIM_CR1, &cr1); + regmap_read(priv->regmap, TIM_PSC, &psc); + regmap_read(priv->regmap, TIM_ARR, &arr); + + if (psc && arr && (cr1 & TIM_CR1_CEN)) { + freq = (unsigned long long)clk_get_rate(priv->clk); + do_div(freq, psc); + do_div(freq, arr); + } + + return sprintf(buf, "%d\n", (unsigned int)freq); +} + +static IIO_DEV_ATTR_SAMP_FREQ(0660, + stm32_tt_read_frequency, + stm32_tt_store_frequency); + +static char *master_mode_table[] = { + "reset", + "enable", + "update", + "compare_pulse", + "OC1REF", + "OC2REF", + "OC3REF", + "OC4REF" +}; + +static ssize_t stm32_tt_show_master_mode(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct stm32_timer_trigger *priv = iio_priv(indio_dev); + u32 cr2; + + regmap_read(priv->regmap, TIM_CR2, &cr2); + cr2 = (cr2 & TIM_CR2_MMS) >> TIM_CR2_MMS_SHIFT; + + return snprintf(buf, PAGE_SIZE, "%s\n", master_mode_table[cr2]); +} + +static ssize_t stm32_tt_store_master_mode(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct stm32_timer_trigger *priv = iio_priv(indio_dev); + int i; + + for (i = 0; i < ARRAY_SIZE(master_mode_table); i++) { + if (!strncmp(master_mode_table[i], buf, + strlen(master_mode_table[i]))) { + regmap_update_bits(priv->regmap, TIM_CR2, + TIM_CR2_MMS, i << TIM_CR2_MMS_SHIFT); + /* Make sure that registers are updated */ + regmap_update_bits(priv->regmap, TIM_EGR, + TIM_EGR_UG, TIM_EGR_UG); + return len; + } + } + + return -EINVAL; +} + +static IIO_CONST_ATTR(master_mode_available, + "reset enable update compare_pulse OC1REF OC2REF OC3REF OC4REF"); + +static IIO_DEVICE_ATTR(master_mode, 0660, + stm32_tt_show_master_mode, + stm32_tt_store_master_mode, + 0); + +static struct attribute *stm32_trigger_attrs[] = { + &iio_dev_attr_sampling_frequency.dev_attr.attr, + &iio_dev_attr_master_mode.dev_attr.attr, + &iio_const_attr_master_mode_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group stm32_trigger_attr_group = { + .attrs = stm32_trigger_attrs, +}; + +static const struct attribute_group *stm32_trigger_attr_groups[] = { + &stm32_trigger_attr_group, + NULL, +}; + +static const struct iio_trigger_ops timer_trigger_ops = { + .owner = THIS_MODULE, +}; + +static int stm32_setup_iio_triggers(struct stm32_timer_trigger *priv) +{ + int ret; + const char * const *cur = priv->triggers; + + while (cur && *cur) { + struct iio_trigger *trig; + + trig = devm_iio_trigger_alloc(priv->dev, "%s", *cur); + if (!trig) + return -ENOMEM; + + trig->dev.parent = priv->dev->parent; + trig->ops = &timer_trigger_ops; + + /* + * sampling frequency and master mode attributes + * should only be available on trgo trigger which + * is always the first in the list. + */ + if (cur == priv->triggers) + trig->dev.groups = stm32_trigger_attr_groups; + + iio_trigger_set_drvdata(trig, priv); + + ret = devm_iio_trigger_register(priv->dev, trig); + if (ret) + return ret; + cur++; + } + + return 0; +} + +/** + * is_stm32_timer_trigger + * @trig: trigger to be checked + * + * return true if the trigger is a valid stm32 iio timer trigger + * either return false + */ +bool is_stm32_timer_trigger(struct iio_trigger *trig) +{ + return (trig->ops == &timer_trigger_ops); +} +EXPORT_SYMBOL(is_stm32_timer_trigger); + +static int stm32_timer_trigger_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct stm32_timer_trigger *priv; + struct stm32_timers *ddata = dev_get_drvdata(pdev->dev.parent); + unsigned int index; + int ret; + + if (of_property_read_u32(dev->of_node, "reg", &index)) + return -EINVAL; + + if (index >= ARRAY_SIZE(triggers_table)) + return -EINVAL; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + + if (!priv) + return -ENOMEM; + + priv->dev = dev; + priv->regmap = ddata->regmap; + priv->clk = ddata->clk; + priv->max_arr = ddata->max_arr; + priv->triggers = triggers_table[index]; + + ret = stm32_setup_iio_triggers(priv); + if (ret) + return ret; + + platform_set_drvdata(pdev, priv); + + return 0; +} + +static const struct of_device_id stm32_trig_of_match[] = { + { .compatible = "st,stm32-timer-trigger", }, + { /* end node */ }, +}; +MODULE_DEVICE_TABLE(of, stm32_trig_of_match); + +static struct platform_driver stm32_timer_trigger_driver = { + .probe = stm32_timer_trigger_probe, + .driver = { + .name = "stm32-timer-trigger", + .of_match_table = stm32_trig_of_match, + }, +}; +module_platform_driver(stm32_timer_trigger_driver); + +MODULE_ALIAS("platform: stm32-timer-trigger"); +MODULE_DESCRIPTION("STMicroelectronics STM32 Timer Trigger driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/iio/timer/stm32-timer-trigger.h b/include/linux/iio/timer/stm32-timer-trigger.h new file mode 100644 index 000000000000..55535aef2e6c --- /dev/null +++ b/include/linux/iio/timer/stm32-timer-trigger.h @@ -0,0 +1,62 @@ +/* + * Copyright (C) STMicroelectronics 2016 + * + * Author: Benjamin Gaignard + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _STM32_TIMER_TRIGGER_H_ +#define _STM32_TIMER_TRIGGER_H_ + +#define TIM1_TRGO "tim1_trgo" +#define TIM1_CH1 "tim1_ch1" +#define TIM1_CH2 "tim1_ch2" +#define TIM1_CH3 "tim1_ch3" +#define TIM1_CH4 "tim1_ch4" + +#define TIM2_TRGO "tim2_trgo" +#define TIM2_CH1 "tim2_ch1" +#define TIM2_CH2 "tim2_ch2" +#define TIM2_CH3 "tim2_ch3" +#define TIM2_CH4 "tim2_ch4" + +#define TIM3_TRGO "tim3_trgo" +#define TIM3_CH1 "tim3_ch1" +#define TIM3_CH2 "tim3_ch2" +#define TIM3_CH3 "tim3_ch3" +#define TIM3_CH4 "tim3_ch4" + +#define TIM4_TRGO "tim4_trgo" +#define TIM4_CH1 "tim4_ch1" +#define TIM4_CH2 "tim4_ch2" +#define TIM4_CH3 "tim4_ch3" +#define TIM4_CH4 "tim4_ch4" + +#define TIM5_TRGO "tim5_trgo" +#define TIM5_CH1 "tim5_ch1" +#define TIM5_CH2 "tim5_ch2" +#define TIM5_CH3 "tim5_ch3" +#define TIM5_CH4 "tim5_ch4" + +#define TIM6_TRGO "tim6_trgo" + +#define TIM7_TRGO "tim7_trgo" + +#define TIM8_TRGO "tim8_trgo" +#define TIM8_CH1 "tim8_ch1" +#define TIM8_CH2 "tim8_ch2" +#define TIM8_CH3 "tim8_ch3" +#define TIM8_CH4 "tim8_ch4" + +#define TIM9_TRGO "tim9_trgo" +#define TIM9_CH1 "tim9_ch1" +#define TIM9_CH2 "tim9_ch2" + +#define TIM12_TRGO "tim12_trgo" +#define TIM12_CH1 "tim12_ch1" +#define TIM12_CH2 "tim12_ch2" + +bool is_stm32_timer_trigger(struct iio_trigger *trig); + +#endif -- cgit v1.2.3