From 3f17790c2d8524c3ddc4946bd716714becf079e1 Mon Sep 17 00:00:00 2001 From: Hemant Gupta Date: Wed, 28 Mar 2012 17:09:09 +0530 Subject: Bluetooth: Use correct flags for checking HCI_SSP_ENABLED bit This patch uses the correct flags for checking the HCI_SSP_ENABLED bit. Without this authentication request was not being initiated. Signed-off-by: Hemant Gupta Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- include/net/bluetooth/hci_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index daefaac51131..8e103281a09b 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -427,7 +427,7 @@ enum { static inline bool hci_conn_ssp_enabled(struct hci_conn *conn) { struct hci_dev *hdev = conn->hdev; - return (test_bit(HCI_SSP_ENABLED, &hdev->flags) && + return (test_bit(HCI_SSP_ENABLED, &hdev->dev_flags) && test_bit(HCI_CONN_SSP_ENABLED, &conn->flags)); } -- cgit v1.2.3 From 94324962066231a938564bebad0f941cd2d06bb2 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 15 Mar 2012 14:48:41 +0100 Subject: Bluetooth: hci_core: fix NULL-pointer dereference at unregister Make sure hci_dev_open returns immediately if hci_dev_unregister has been called. This fixes a race between hci_dev_open and hci_dev_unregister which can lead to a NULL-pointer dereference. Bug is 100% reproducible using hciattach and a disconnected serial port: 0. # hciattach -n /dev/ttyO1 any noflow 1. hci_dev_open called from hci_power_on grabs req lock 2. hci_init_req executes but device fails to initialise (times out eventually) 3. hci_dev_open is called from hci_sock_ioctl and sleeps on req lock 4. hci_uart_tty_close calls hci_dev_unregister and sleeps on req lock in hci_dev_do_close 5. hci_dev_open (1) releases req lock 6. hci_dev_do_close grabs req lock and returns as device is not up 7. hci_dev_unregister sleeps in destroy_workqueue 8. hci_dev_open (3) grabs req lock, calls hci_init_req and eventually sleeps 9. hci_dev_unregister finishes, while hci_dev_open is still running... [ 79.627136] INFO: trying to register non-static key. [ 79.632354] the code is fine but needs lockdep annotation. [ 79.638122] turning off the locking correctness validator. [ 79.643920] [] (unwind_backtrace+0x0/0xf8) from [] (__lock_acquire+0x1590/0x1ab0) [ 79.653594] [] (__lock_acquire+0x1590/0x1ab0) from [] (lock_acquire+0x9c/0x128) [ 79.663085] [] (lock_acquire+0x9c/0x128) from [] (run_timer_softirq+0x150/0x3ac) [ 79.672668] [] (run_timer_softirq+0x150/0x3ac) from [] (__do_softirq+0xd4/0x22c) [ 79.682281] [] (__do_softirq+0xd4/0x22c) from [] (irq_exit+0x8c/0x94) [ 79.690856] [] (irq_exit+0x8c/0x94) from [] (handle_IRQ+0x34/0x84) [ 79.699157] [] (handle_IRQ+0x34/0x84) from [] (omap3_intc_handle_irq+0x48/0x4c) [ 79.708648] [] (omap3_intc_handle_irq+0x48/0x4c) from [] (__irq_usr+0x3c/0x60) [ 79.718048] Exception stack(0xcf281fb0 to 0xcf281ff8) [ 79.723358] 1fa0: 0001e6a0 be8dab00 0001e698 00036698 [ 79.731933] 1fc0: 0002df98 0002df38 0000001f 00000000 b6f234d0 00000000 00000004 00000000 [ 79.740509] 1fe0: 0001e6f8 be8d6aa0 be8dac50 0000aab8 80000010 ffffffff [ 79.747497] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 79.756011] pgd = cf3b4000 [ 79.758850] [00000000] *pgd=8f0c7831, *pte=00000000, *ppte=00000000 [ 79.765502] Internal error: Oops: 80000007 [#1] [ 79.770294] Modules linked in: [ 79.773529] CPU: 0 Tainted: G W (3.3.0-rc6-00002-gb5d5c87 #421) [ 79.781066] PC is at 0x0 [ 79.783721] LR is at run_timer_softirq+0x16c/0x3ac [ 79.788787] pc : [<00000000>] lr : [] psr: 60000113 [ 79.788787] sp : cf281ee0 ip : 00000000 fp : cf280000 [ 79.800903] r10: 00000004 r9 : 00000100 r8 : b6f234d0 [ 79.806427] r7 : c0519c28 r6 : cf093488 r5 : c0561a00 r4 : 00000000 [ 79.813323] r3 : 00000000 r2 : c054eee0 r1 : 00000001 r0 : 00000000 [ 79.820190] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 79.827728] Control: 10c5387d Table: 8f3b4019 DAC: 00000015 [ 79.833801] Process gpsd (pid: 1265, stack limit = 0xcf2802e8) [ 79.839965] Stack: (0xcf281ee0 to 0xcf282000) [ 79.844573] 1ee0: 00000002 00000000 c0040a24 00000000 00000002 cf281f08 00200200 00000000 [ 79.853210] 1f00: 00000000 cf281f18 cf281f08 00000000 00000000 00000000 cf281f18 cf281f18 [ 79.861816] 1f20: 00000000 00000001 c056184c 00000000 00000001 b6f234d0 c0561848 00000004 [ 79.870452] 1f40: cf280000 c003a3b8 c051e79c 00000001 00000000 00000100 3fa9e7b8 0000000a [ 79.879089] 1f60: 00000025 cf280000 00000025 00000000 00000000 b6f234d0 00000000 00000004 [ 79.887756] 1f80: 00000000 c003a924 c053ad38 c0013a50 fa200000 cf281fb0 ffffffff c0008530 [ 79.896362] 1fa0: 0001e6a0 0000aab8 80000010 c037499c 0001e6a0 be8dab00 0001e698 00036698 [ 79.904998] 1fc0: 0002df98 0002df38 0000001f 00000000 b6f234d0 00000000 00000004 00000000 [ 79.913665] 1fe0: 0001e6f8 be8d6aa0 be8dac50 0000aab8 80000010 ffffffff 00fbf700 04ffff00 [ 79.922302] [] (run_timer_softirq+0x16c/0x3ac) from [] (__do_softirq+0xd4/0x22c) [ 79.931945] [] (__do_softirq+0xd4/0x22c) from [] (irq_exit+0x8c/0x94) [ 79.940582] [] (irq_exit+0x8c/0x94) from [] (handle_IRQ+0x34/0x84) [ 79.948913] [] (handle_IRQ+0x34/0x84) from [] (omap3_intc_handle_irq+0x48/0x4c) [ 79.958404] [] (omap3_intc_handle_irq+0x48/0x4c) from [] (__irq_usr+0x3c/0x60) [ 79.967773] Exception stack(0xcf281fb0 to 0xcf281ff8) [ 79.973083] 1fa0: 0001e6a0 be8dab00 0001e698 00036698 [ 79.981658] 1fc0: 0002df98 0002df38 0000001f 00000000 b6f234d0 00000000 00000004 00000000 [ 79.990234] 1fe0: 0001e6f8 be8d6aa0 be8dac50 0000aab8 80000010 ffffffff [ 79.997161] Code: bad PC value [ 80.000396] ---[ end trace 6f6739840475f9ee ]--- [ 80.005279] Kernel panic - not syncing: Fatal exception in interrupt Cc: stable Signed-off-by: Johan Hovold Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- include/net/bluetooth/hci.h | 1 + net/bluetooth/hci_core.c | 7 +++++++ 2 files changed, 8 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 344b0f972828..8f928f75e85e 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -92,6 +92,7 @@ enum { HCI_SERVICE_CACHE, HCI_LINK_KEYS, HCI_DEBUG_KEYS, + HCI_UNREGISTER, HCI_LE_SCAN, HCI_SSP_ENABLED, diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 59ec99eb739b..2054c1321c87 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -666,6 +666,11 @@ int hci_dev_open(__u16 dev) hci_req_lock(hdev); + if (test_bit(HCI_UNREGISTER, &hdev->dev_flags)) { + ret = -ENODEV; + goto done; + } + if (hdev->rfkill && rfkill_blocked(hdev->rfkill)) { ret = -ERFKILL; goto done; @@ -1850,6 +1855,8 @@ void hci_unregister_dev(struct hci_dev *hdev) BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus); + set_bit(HCI_UNREGISTER, &hdev->dev_flags); + write_lock(&hci_dev_list_lock); list_del(&hdev->list); write_unlock(&hci_dev_list_lock); -- cgit v1.2.3 From 84d9d0716b2d5f4a27de4801bd2dbf7aff5e1c38 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 26 Mar 2012 14:21:41 +0300 Subject: Bluetooth: Don't increment twice in eir_has_data_type() The parsed variable is already incremented inside the for-loop so there no need to increment it again (not to mention that the code was incrementing it the wrong amount). Reported-by: Dan Carpenter Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 8e103281a09b..220d8e0a75fb 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -907,11 +907,10 @@ static inline void hci_role_switch_cfm(struct hci_conn *conn, __u8 status, static inline bool eir_has_data_type(u8 *data, size_t data_len, u8 type) { - u8 field_len; - size_t parsed; + size_t parsed = 0; - for (parsed = 0; parsed < data_len - 1; parsed += field_len) { - field_len = data[0]; + while (parsed < data_len - 1) { + u8 field_len = data[0]; if (field_len == 0) break; -- cgit v1.2.3 From 6c0c331e4c8ff6c0f7fa6cc5fd08d853d6c579c4 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 26 Mar 2012 14:21:42 +0300 Subject: Bluetooth: Check for minimum data length in eir_has_data_type() If passed 0 as data_length the (parsed < data_length - 1) test will be true and cause a buffer overflow. In practice we need at least two bytes for the element length and type so add a test for it to the very beginning of the function. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 220d8e0a75fb..6822d2595aff 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -909,6 +909,9 @@ static inline bool eir_has_data_type(u8 *data, size_t data_len, u8 type) { size_t parsed = 0; + if (data_len < 2) + return false; + while (parsed < data_len - 1) { u8 field_len = data[0]; -- cgit v1.2.3 From c732a2af12e20f2784c8b0c9d2e289579313a413 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Mon, 19 Mar 2012 09:42:31 +0200 Subject: Bluetooth: mgmt: Fix timeout type Silence sparse warnings: net/bluetooth/mgmt.c:865:19: warning: cast to restricted __le16 Signed-off-by: Andrei Emeltchenko Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/mgmt.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h index ffc1377e092e..ebfd91fc20f8 100644 --- a/include/net/bluetooth/mgmt.h +++ b/include/net/bluetooth/mgmt.h @@ -117,7 +117,7 @@ struct mgmt_mode { #define MGMT_OP_SET_DISCOVERABLE 0x0006 struct mgmt_cp_set_discoverable { __u8 val; - __u16 timeout; + __le16 timeout; } __packed; #define MGMT_SET_DISCOVERABLE_SIZE 3 -- cgit v1.2.3 From 8bcb6c7d48eb341b1f49f814cdcbe05eb6f15680 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 30 Mar 2012 12:33:28 +0200 Subject: block: use lockdep_assert_held for queue locking Instead of an ugly open coded variant. Cc: axboe@kernel.dk Signed-off-by: Andi Kleen Signed-off-by: Jens Axboe --- block/blk-throttle.c | 2 +- include/linux/blkdev.h | 18 +++++++----------- 2 files changed, 8 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/block/blk-throttle.c b/block/blk-throttle.c index 5eed6a76721d..f2ddb94626bd 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -1218,7 +1218,7 @@ void blk_throtl_drain(struct request_queue *q) struct bio_list bl; struct bio *bio; - WARN_ON_ONCE(!queue_is_locked(q)); + queue_lockdep_assert_held(q); bio_list_init(&bl); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 606cf339bb56..2aa24664a5b5 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -426,14 +426,10 @@ struct request_queue { (1 << QUEUE_FLAG_SAME_COMP) | \ (1 << QUEUE_FLAG_ADD_RANDOM)) -static inline int queue_is_locked(struct request_queue *q) +static inline void queue_lockdep_assert_held(struct request_queue *q) { -#ifdef CONFIG_SMP - spinlock_t *lock = q->queue_lock; - return lock && spin_is_locked(lock); -#else - return 1; -#endif + if (q->queue_lock) + lockdep_assert_held(q->queue_lock); } static inline void queue_flag_set_unlocked(unsigned int flag, @@ -445,7 +441,7 @@ static inline void queue_flag_set_unlocked(unsigned int flag, static inline int queue_flag_test_and_clear(unsigned int flag, struct request_queue *q) { - WARN_ON_ONCE(!queue_is_locked(q)); + queue_lockdep_assert_held(q); if (test_bit(flag, &q->queue_flags)) { __clear_bit(flag, &q->queue_flags); @@ -458,7 +454,7 @@ static inline int queue_flag_test_and_clear(unsigned int flag, static inline int queue_flag_test_and_set(unsigned int flag, struct request_queue *q) { - WARN_ON_ONCE(!queue_is_locked(q)); + queue_lockdep_assert_held(q); if (!test_bit(flag, &q->queue_flags)) { __set_bit(flag, &q->queue_flags); @@ -470,7 +466,7 @@ static inline int queue_flag_test_and_set(unsigned int flag, static inline void queue_flag_set(unsigned int flag, struct request_queue *q) { - WARN_ON_ONCE(!queue_is_locked(q)); + queue_lockdep_assert_held(q); __set_bit(flag, &q->queue_flags); } @@ -487,7 +483,7 @@ static inline int queue_in_flight(struct request_queue *q) static inline void queue_flag_clear(unsigned int flag, struct request_queue *q) { - WARN_ON_ONCE(!queue_is_locked(q)); + queue_lockdep_assert_held(q); __clear_bit(flag, &q->queue_flags); } -- cgit v1.2.3 From 327ef2e9048a5e39bf84d7f17f78a87e7a068742 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 23 Mar 2012 13:05:48 +0530 Subject: spi/pL022: include types.h to remove compilation warnings linux/pl022.h uses definitions like, u8, u16, etc, which have dependency of types.h file, which isn't included in it. So, we get compilation warnings. This patch includes types.h there to fix these warnings. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Grant Likely --- include/linux/amba/pl022.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index b8c51124ed19..76dd1b199a1b 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -25,6 +25,8 @@ #ifndef _SSP_PL022_H #define _SSP_PL022_H +#include + /** * whether SSP is in loopback mode or not */ -- cgit v1.2.3 From dcf9af822803bcc2cd9e8009648547e6060b59a0 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Tue, 3 Apr 2012 21:27:58 +0900 Subject: drm/exynos: fixed page align and code clean. 1M section, 64k page count also should be rounded up so this patch rounds up them and caculates page count of them properly and also checks memory flags from user. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_buf.c | 13 ++++------ drivers/gpu/drm/exynos/exynos_drm_gem.c | 45 ++++++++++++++++++++++++++------- drivers/gpu/drm/exynos/exynos_drm_gem.h | 2 ++ include/drm/exynos_drm.h | 3 ++- 4 files changed, 45 insertions(+), 18 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.c b/drivers/gpu/drm/exynos/exynos_drm_buf.c index 4a3a5f72ed4a..52d42cdeeb9b 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_buf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_buf.c @@ -41,7 +41,7 @@ static int lowlevel_buffer_allocate(struct drm_device *dev, DRM_DEBUG_KMS("%s\n", __FILE__); - if (flags & EXYNOS_BO_NONCONTIG) { + if (IS_NONCONTIG_BUFFER(flags)) { DRM_DEBUG_KMS("not support allocation type.\n"); return -EINVAL; } @@ -52,13 +52,13 @@ static int lowlevel_buffer_allocate(struct drm_device *dev, } if (buf->size >= SZ_1M) { - npages = (buf->size >> SECTION_SHIFT) + 1; + npages = buf->size >> SECTION_SHIFT; page_size = SECTION_SIZE; } else if (buf->size >= SZ_64K) { - npages = (buf->size >> 16) + 1; + npages = buf->size >> 16; page_size = SZ_64K; } else { - npages = (buf->size >> PAGE_SHIFT) + 1; + npages = buf->size >> PAGE_SHIFT; page_size = PAGE_SIZE; } @@ -119,9 +119,6 @@ static int lowlevel_buffer_allocate(struct drm_device *dev, buf->pages[i] = phys_to_page(start_addr); - sgl = sg_next(sgl); - sg_set_page(sgl, buf->pages[i+1], end_addr - start_addr, 0); - DRM_DEBUG_KMS("vaddr(0x%lx), dma_addr(0x%lx), size(0x%lx)\n", (unsigned long)buf->kvaddr, (unsigned long)buf->dma_addr, @@ -150,7 +147,7 @@ static void lowlevel_buffer_deallocate(struct drm_device *dev, * non-continuous memory would be released by exynos * gem framework. */ - if (flags & EXYNOS_BO_NONCONTIG) { + if (IS_NONCONTIG_BUFFER(flags)) { DRM_DEBUG_KMS("not support allocation type.\n"); return; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index fa1aa94a3d8e..26d51979116b 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -56,9 +56,28 @@ static unsigned int convert_to_vm_err_msg(int msg) return out_msg; } -static unsigned int mask_gem_flags(unsigned int flags) +static int check_gem_flags(unsigned int flags) { - return flags &= EXYNOS_BO_NONCONTIG; + if (flags & ~(EXYNOS_BO_MASK)) { + DRM_ERROR("invalid flags.\n"); + return -EINVAL; + } + + return 0; +} + +static unsigned long roundup_gem_size(unsigned long size, unsigned int flags) +{ + if (!IS_NONCONTIG_BUFFER(flags)) { + if (size >= SZ_1M) + return roundup(size, SECTION_SIZE); + else if (size >= SZ_64K) + return roundup(size, SZ_64K); + else + goto out; + } +out: + return roundup(size, PAGE_SIZE); } static struct page **exynos_gem_get_pages(struct drm_gem_object *obj, @@ -319,10 +338,17 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, struct exynos_drm_gem_buf *buf; int ret; - size = roundup(size, PAGE_SIZE); - DRM_DEBUG_KMS("%s: size = 0x%lx\n", __FILE__, size); + if (!size) { + DRM_ERROR("invalid size.\n"); + return ERR_PTR(-EINVAL); + } - flags = mask_gem_flags(flags); + size = roundup_gem_size(size, flags); + DRM_DEBUG_KMS("%s\n", __FILE__); + + ret = check_gem_flags(flags); + if (ret) + return ERR_PTR(ret); buf = exynos_drm_init_buf(dev, size); if (!buf) @@ -331,7 +357,7 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, exynos_gem_obj = exynos_drm_gem_init(dev, size); if (!exynos_gem_obj) { ret = -ENOMEM; - goto err; + goto err_fini_buf; } exynos_gem_obj->buffer = buf; @@ -347,18 +373,19 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, ret = exynos_drm_gem_get_pages(&exynos_gem_obj->base); if (ret < 0) { drm_gem_object_release(&exynos_gem_obj->base); - goto err; + goto err_fini_buf; } } else { ret = exynos_drm_alloc_buf(dev, buf, flags); if (ret < 0) { drm_gem_object_release(&exynos_gem_obj->base); - goto err; + goto err_fini_buf; } } return exynos_gem_obj; -err: + +err_fini_buf: exynos_drm_fini_buf(dev, buf); return ERR_PTR(ret); } diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.h b/drivers/gpu/drm/exynos/exynos_drm_gem.h index e40fbad8b705..4ed842039505 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.h +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.h @@ -29,6 +29,8 @@ #define to_exynos_gem_obj(x) container_of(x,\ struct exynos_drm_gem_obj, base) +#define IS_NONCONTIG_BUFFER(f) (f & EXYNOS_BO_NONCONTIG) + /* * exynos drm gem buffer structure. * diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h index 3963116083ae..1bb2d4719201 100644 --- a/include/drm/exynos_drm.h +++ b/include/drm/exynos_drm.h @@ -96,7 +96,8 @@ struct drm_exynos_plane_set_zpos { /* memory type definitions. */ enum e_drm_exynos_gem_mem_type { /* Physically Non-Continuous memory. */ - EXYNOS_BO_NONCONTIG = 1 << 0 + EXYNOS_BO_NONCONTIG = 1 << 0, + EXYNOS_BO_MASK = EXYNOS_BO_NONCONTIG }; #define DRM_EXYNOS_GEM_CREATE 0x00 -- cgit v1.2.3 From 66f3b913e68e8e62bd2f9499495eeb6cc81b2662 Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Thu, 29 Mar 2012 09:47:53 -0300 Subject: Bluetooth: Fix userspace compatibility issue with mgmt interface To ensure that old user space versions do not accidentally pick up and try to use the management channel, use a different channel number. Reported-by: Keith Packard Acked-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 8f928f75e85e..d47e523c9d83 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -1328,8 +1328,8 @@ struct sockaddr_hci { #define HCI_DEV_NONE 0xffff #define HCI_CHANNEL_RAW 0 -#define HCI_CHANNEL_CONTROL 1 #define HCI_CHANNEL_MONITOR 2 +#define HCI_CHANNEL_CONTROL 3 struct hci_filter { unsigned long type_mask; -- cgit v1.2.3 From a2bd1140a264b561e38d99e656cd843c2d840e86 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 Apr 2012 16:10:46 -0700 Subject: netdma: adding alignment check for NETDMA ops This is the fallout from adding memcpy alignment workaround for certain IOATDMA hardware. NetDMA will only use DMA engine that can handle byte align ops. Acked-by: David S. Miller Signed-off-by: Dave Jiang Signed-off-by: Dan Williams --- drivers/dma/dmaengine.c | 14 ++++++++++++++ include/linux/dmaengine.h | 1 + net/ipv4/tcp.c | 4 ++-- net/ipv4/tcp_input.c | 2 +- net/ipv4/tcp_ipv4.c | 2 +- net/ipv6/tcp_ipv6.c | 2 +- 6 files changed, 20 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index a6c6051ec858..0f1ca74fe0bb 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -332,6 +332,20 @@ struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type) } EXPORT_SYMBOL(dma_find_channel); +/* + * net_dma_find_channel - find a channel for net_dma + * net_dma has alignment requirements + */ +struct dma_chan *net_dma_find_channel(void) +{ + struct dma_chan *chan = dma_find_channel(DMA_MEMCPY); + if (chan && !is_dma_copy_aligned(chan->device, 1, 1, 1)) + return NULL; + + return chan; +} +EXPORT_SYMBOL(net_dma_find_channel); + /** * dma_issue_pending_all - flush all pending operations across all channels */ diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 679b349d9b66..a5bb3ad5c7a5 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -948,6 +948,7 @@ int dma_async_device_register(struct dma_device *device); void dma_async_device_unregister(struct dma_device *device); void dma_run_dependencies(struct dma_async_tx_descriptor *tx); struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type); +struct dma_chan *net_dma_find_channel(void); #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y) /* --- Helper iov-locking functions --- */ diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 22ef5f9fd2ff..8712c5d4f91d 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1450,7 +1450,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, if ((available < target) && (len > sysctl_tcp_dma_copybreak) && !(flags & MSG_PEEK) && !sysctl_tcp_low_latency && - dma_find_channel(DMA_MEMCPY)) { + net_dma_find_channel()) { preempt_enable_no_resched(); tp->ucopy.pinned_list = dma_pin_iovec_pages(msg->msg_iov, len); @@ -1665,7 +1665,7 @@ do_prequeue: if (!(flags & MSG_TRUNC)) { #ifdef CONFIG_NET_DMA if (!tp->ucopy.dma_chan && tp->ucopy.pinned_list) - tp->ucopy.dma_chan = dma_find_channel(DMA_MEMCPY); + tp->ucopy.dma_chan = net_dma_find_channel(); if (tp->ucopy.dma_chan) { tp->ucopy.dma_cookie = dma_skb_copy_datagram_iovec( diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index b5e315f13641..27c676dfea33 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5190,7 +5190,7 @@ static int tcp_dma_try_early_copy(struct sock *sk, struct sk_buff *skb, return 0; if (!tp->ucopy.dma_chan && tp->ucopy.pinned_list) - tp->ucopy.dma_chan = dma_find_channel(DMA_MEMCPY); + tp->ucopy.dma_chan = net_dma_find_channel(); if (tp->ucopy.dma_chan && skb_csum_unnecessary(skb)) { diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index fd54c5f8a255..3810b6fe0a1e 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1727,7 +1727,7 @@ process: #ifdef CONFIG_NET_DMA struct tcp_sock *tp = tcp_sk(sk); if (!tp->ucopy.dma_chan && tp->ucopy.pinned_list) - tp->ucopy.dma_chan = dma_find_channel(DMA_MEMCPY); + tp->ucopy.dma_chan = net_dma_find_channel(); if (tp->ucopy.dma_chan) ret = tcp_v4_do_rcv(sk, skb); else diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 3edd05ae4388..fcb3e4f0010e 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1755,7 +1755,7 @@ process: #ifdef CONFIG_NET_DMA struct tcp_sock *tp = tcp_sk(sk); if (!tp->ucopy.dma_chan && tp->ucopy.pinned_list) - tp->ucopy.dma_chan = dma_find_channel(DMA_MEMCPY); + tp->ucopy.dma_chan = net_dma_find_channel(); if (tp->ucopy.dma_chan) ret = tcp_v6_do_rcv(sk, skb); else -- cgit v1.2.3 From 95ad2f873d5d404dc9ebc2377de0b762346346c0 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 6 Apr 2012 18:12:54 +0200 Subject: netfilter: ip6_tables: ip6t_ext_hdr is now static inline We may hit this in xt_LOG: net/built-in.o:xt_LOG.c:function dump_ipv6_packet: error: undefined reference to 'ip6t_ext_hdr' happens with these config options: CONFIG_NETFILTER_XT_TARGET_LOG=y CONFIG_IP6_NF_IPTABLES=m ip6t_ext_hdr is fairly small and it is called in the packet path. Make it static inline. Reported-by: Simon Kirby Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter_ipv6/ip6_tables.h | 12 +++++++++++- net/ipv6/netfilter/ip6_tables.c | 14 -------------- 2 files changed, 11 insertions(+), 15 deletions(-) (limited to 'include') diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h index f549adccc94c..1bc898b14a80 100644 --- a/include/linux/netfilter_ipv6/ip6_tables.h +++ b/include/linux/netfilter_ipv6/ip6_tables.h @@ -287,7 +287,17 @@ extern unsigned int ip6t_do_table(struct sk_buff *skb, struct xt_table *table); /* Check for an extension */ -extern int ip6t_ext_hdr(u8 nexthdr); +static inline int +ip6t_ext_hdr(u8 nexthdr) +{ return (nexthdr == IPPROTO_HOPOPTS) || + (nexthdr == IPPROTO_ROUTING) || + (nexthdr == IPPROTO_FRAGMENT) || + (nexthdr == IPPROTO_ESP) || + (nexthdr == IPPROTO_AH) || + (nexthdr == IPPROTO_NONE) || + (nexthdr == IPPROTO_DSTOPTS); +} + /* find specified header and get offset to it */ extern int ipv6_find_hdr(const struct sk_buff *skb, unsigned int *offset, int target, unsigned short *fragoff); diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index 94874b0bdcdc..9d4e15559319 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -78,19 +78,6 @@ EXPORT_SYMBOL_GPL(ip6t_alloc_initial_table); Hence the start of any table is given by get_table() below. */ -/* Check for an extension */ -int -ip6t_ext_hdr(u8 nexthdr) -{ - return (nexthdr == IPPROTO_HOPOPTS) || - (nexthdr == IPPROTO_ROUTING) || - (nexthdr == IPPROTO_FRAGMENT) || - (nexthdr == IPPROTO_ESP) || - (nexthdr == IPPROTO_AH) || - (nexthdr == IPPROTO_NONE) || - (nexthdr == IPPROTO_DSTOPTS); -} - /* Returns whether matches rule or not. */ /* Performance critical - called for every packet */ static inline bool @@ -2366,7 +2353,6 @@ int ipv6_find_hdr(const struct sk_buff *skb, unsigned int *offset, EXPORT_SYMBOL(ip6t_register_table); EXPORT_SYMBOL(ip6t_unregister_table); EXPORT_SYMBOL(ip6t_do_table); -EXPORT_SYMBOL(ip6t_ext_hdr); EXPORT_SYMBOL(ipv6_find_hdr); module_init(ip6_tables_init); -- cgit v1.2.3 From 49b532f96fda23663f8be35593d1c1372c0f91e0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 6 Apr 2012 11:49:44 -0700 Subject: Revert "serial/8250_pci: setup-quirk workaround for the kt serial controller" This reverts commit 448ac154c957c4580531fa0c8f2045816fe2f0e7. The semantic of UPF_IIR_ONCE is only guaranteed to workaround the race condition in the kt serial's iir register if the only source of interrupts is THRE (fifo-empty) events. An modem status event at the wrong time can again cause an iir read to drop the 'empty' status leading to a hang. So, revert this in preparation for using the existing "I don't trust my iir register" workaround in the 8250 core (UART_BUG_THRE). [stable: 3.3.x] Cc: stable Acked-by: Alan Cox Cc: Sudhakar Mamillapalli Reported-by: Nhan H Mai Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 4 +--- drivers/tty/serial/8250/8250_pci.c | 17 +---------------- include/linux/serial_core.h | 1 - 3 files changed, 2 insertions(+), 20 deletions(-) (limited to 'include') diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 5b149b466ec8..56492d208a7a 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -1572,13 +1572,11 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id) do { struct uart_8250_port *up; struct uart_port *port; - bool skip; up = list_entry(l, struct uart_8250_port, list); port = &up->port; - skip = pass_counter && up->port.flags & UPF_IIR_ONCE; - if (!skip && port->handle_irq(port)) { + if (port->handle_irq(port)) { handled = 1; end = NULL; } else if (end == NULL) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 1d4ccf8c8874..105dcfbd3d33 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1092,14 +1092,6 @@ static int skip_tx_en_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } -static int kt_serial_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - port->flags |= UPF_IIR_ONCE; - return skip_tx_en_setup(priv, board, port, idx); -} - static int pci_eg20t_init(struct pci_dev *dev) { #if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) @@ -1118,6 +1110,7 @@ pci_xr17c154_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +/* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B #define PCI_DEVICE_ID_OCTPRO 0x0001 @@ -1147,7 +1140,6 @@ pci_xr17c154_setup(struct serial_private *priv, #define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 -#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -1232,13 +1224,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = ce4100_serial_setup, }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = kt_serial_setup, - }, /* * ITE */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index f51bf2e70c69..882f1d61aa56 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -357,7 +357,6 @@ struct uart_port { #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) #define UPF_EXAR_EFR ((__force upf_t) (1 << 25)) -#define UPF_IIR_ONCE ((__force upf_t) (1 << 26)) /* The exact UART type is known and should not be probed. */ #define UPF_FIXED_TYPE ((__force upf_t) (1 << 27)) #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) -- cgit v1.2.3 From bc02d15a3452fdf9276e8fb89c5e504a88df888a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 6 Apr 2012 11:49:50 -0700 Subject: serial/8250_pci: add a "force background timer" flag and use it for the "kt" serial port Workaround dropped notifications in the iir register. Register reads coincident with new interrupt notifications sometimes result in this device clearing the interrupt event without reporting it in the read data. The serial core already has a heuristic for determining when a device has an untrustworthy iir register. In this case when we apriori know that the iir is faulty use a flag (UPF_BUG_THRE) to bypass the test and force usage of the background timer. [stable: 3.3.x] Acked-by: Alan Cox Cc: stable Reported-by: Nhan H Mai Reported-by: Sudhakar Mamillapalli Tested-by: Nhan H Mai Tested-by: Sudhakar Mamillapalli Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 8 +++++--- drivers/tty/serial/8250/8250_pci.c | 17 ++++++++++++++++- include/linux/serial_core.h | 1 + 3 files changed, 22 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 56492d208a7a..5c27f7e6c9f1 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -2035,10 +2035,12 @@ static int serial8250_startup(struct uart_port *port) spin_unlock_irqrestore(&port->lock, flags); /* - * If the interrupt is not reasserted, setup a timer to - * kick the UART on a regular basis. + * If the interrupt is not reasserted, or we otherwise + * don't trust the iir, setup a timer to kick the UART + * on a regular basis. */ - if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) { + if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) || + up->port.flags & UPF_BUG_THRE) { up->bugs |= UART_BUG_THRE; pr_debug("ttyS%d - using backup timer\n", serial_index(port)); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 105dcfbd3d33..858dca865d6a 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1092,6 +1092,14 @@ static int skip_tx_en_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +static int kt_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_BUG_THRE; + return skip_tx_en_setup(priv, board, port, idx); +} + static int pci_eg20t_init(struct pci_dev *dev) { #if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) @@ -1110,7 +1118,6 @@ pci_xr17c154_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } -/* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B #define PCI_DEVICE_ID_OCTPRO 0x0001 @@ -1140,6 +1147,7 @@ pci_xr17c154_setup(struct serial_private *priv, #define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 +#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -1224,6 +1232,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = ce4100_serial_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = kt_serial_setup, + }, /* * ITE */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 882f1d61aa56..2db407a40051 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -357,6 +357,7 @@ struct uart_port { #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) #define UPF_EXAR_EFR ((__force upf_t) (1 << 25)) +#define UPF_BUG_THRE ((__force upf_t) (1 << 26)) /* The exact UART type is known and should not be probed. */ #define UPF_FIXED_TYPE ((__force upf_t) (1 << 27)) #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) -- cgit v1.2.3 From aa331df0e5e6ebac086ed80b4fbbfd912fe6b32a Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 6 Apr 2012 16:35:53 -0500 Subject: mac80211: Convert WARN_ON to WARN_ON_ONCE When the control-rate tables are not set up correctly, it makes little sense to spam the logs, thus change the WARN_ON to WARN_ON_ONCE. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- include/net/mac80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 87d203ff7a8a..9210bdc7bd8d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1327,7 +1327,7 @@ static inline struct ieee80211_rate * ieee80211_get_tx_rate(const struct ieee80211_hw *hw, const struct ieee80211_tx_info *c) { - if (WARN_ON(c->control.rates[0].idx < 0)) + if (WARN_ON_ONCE(c->control.rates[0].idx < 0)) return NULL; return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[0].idx]; } -- cgit v1.2.3 From 891a3b1fddb24b4b53426685bd0390bb74c9b5b3 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 28 Mar 2012 16:10:49 -0400 Subject: USB: fix bug in serial driver unregistration This patch (as1536) fixes a bug in the USB serial core. Unloading and reloading a serial driver while a serial device is plugged in causes errors because of the code in usb_serial_disconnect() that tries to make sure the port_remove method is called. With the new order of driver registration introduced in the 3.4 kernel, this is definitely not the right thing to do (if indeed it ever was). The patch removes that whole section code, along with the mechanism for keeping track of each port's registration state, which is no longer needed. The driver core can handle all that stuff for us. Note: This has been tested only with one or two USB serial drivers. In theory, other drivers might still run into trouble. But if they do, it will be the fault of the drivers, not of this patch -- that is, the drivers will need to be fixed. Signed-off-by: Alan Stern Reported-and-tested-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/bus.c | 5 ----- drivers/usb/serial/usb-serial.c | 23 ++--------------------- include/linux/usb/serial.h | 8 -------- 3 files changed, 2 insertions(+), 34 deletions(-) (limited to 'include') diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 7f547dc3a590..ed8adb052ca7 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -60,8 +60,6 @@ static int usb_serial_device_probe(struct device *dev) retval = -ENODEV; goto exit; } - if (port->dev_state != PORT_REGISTERING) - goto exit; driver = port->serial->type; if (driver->port_probe) { @@ -98,9 +96,6 @@ static int usb_serial_device_remove(struct device *dev) if (!port) return -ENODEV; - if (port->dev_state != PORT_UNREGISTERING) - return retval; - device_remove_file(&port->dev, &dev_attr_port_number); driver = port->serial->type; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 69230f01056a..5413bd500781 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1070,17 +1070,12 @@ int usb_serial_probe(struct usb_interface *interface, port = serial->port[i]; dev_set_name(&port->dev, "ttyUSB%d", port->number); dbg ("%s - registering %s", __func__, dev_name(&port->dev)); - port->dev_state = PORT_REGISTERING; device_enable_async_suspend(&port->dev); retval = device_add(&port->dev); - if (retval) { + if (retval) dev_err(&port->dev, "Error registering port device, " "continuing\n"); - port->dev_state = PORT_UNREGISTERED; - } else { - port->dev_state = PORT_REGISTERED; - } } usb_serial_console_init(debug, minor); @@ -1124,22 +1119,8 @@ void usb_serial_disconnect(struct usb_interface *interface) } kill_traffic(port); cancel_work_sync(&port->work); - if (port->dev_state == PORT_REGISTERED) { - - /* Make sure the port is bound so that the - * driver's port_remove method is called. - */ - if (!port->dev.driver) { - int rc; - - port->dev.driver = - &serial->type->driver; - rc = device_bind_driver(&port->dev); - } - port->dev_state = PORT_UNREGISTERING; + if (device_is_registered(&port->dev)) device_del(&port->dev); - port->dev_state = PORT_UNREGISTERED; - } } } serial->type->disconnect(serial); diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index fbb666b1b670..474283888233 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -28,13 +28,6 @@ /* parity check flag */ #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) -enum port_dev_state { - PORT_UNREGISTERED, - PORT_REGISTERING, - PORT_REGISTERED, - PORT_UNREGISTERING, -}; - /* USB serial flags */ #define USB_SERIAL_WRITE_BUSY 0 @@ -124,7 +117,6 @@ struct usb_serial_port { char throttle_req; unsigned long sysrq; /* sysrq timeout */ struct device dev; - enum port_dev_state dev_state; }; #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) -- cgit v1.2.3 From fae3d88a5c56c3f836e95c4516da883a48612437 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Tue, 10 Apr 2012 17:00:35 +0800 Subject: ALSA: hda - hide HDMI/ELD printks unless snd.debug=2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Also remove two warnings when CONFIG_SND_DEBUG is not set: sound/pci/hda/patch_hdmi.c: In function ‘hdmi_intrinsic_event’: sound/pci/hda/patch_hdmi.c:761:6: warning: unused variable ‘eldv’ [-Wunused-variable] sound/pci/hda/patch_hdmi.c:760:6: warning: unused variable ‘pd’ [-Wunused-variable] Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai --- include/sound/core.h | 10 ++++++++++ sound/pci/hda/hda_eld.c | 6 +++--- sound/pci/hda/patch_hdmi.c | 9 ++++----- 3 files changed, 17 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/sound/core.h b/include/sound/core.h index b6e0f57d451d..bc056687f647 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -325,6 +325,13 @@ void release_and_free_resource(struct resource *res); /* --- */ +/* sound printk debug levels */ +enum { + SND_PR_ALWAYS, + SND_PR_DEBUG, + SND_PR_VERBOSE, +}; + #if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK) __printf(4, 5) void __snd_printk(unsigned int level, const char *file, int line, @@ -354,6 +361,8 @@ void __snd_printk(unsigned int level, const char *file, int line, */ #define snd_printd(fmt, args...) \ __snd_printk(1, __FILE__, __LINE__, fmt, ##args) +#define _snd_printd(level, fmt, args...) \ + __snd_printk(level, __FILE__, __LINE__, fmt, ##args) /** * snd_BUG - give a BUG warning message and stack trace @@ -383,6 +392,7 @@ void __snd_printk(unsigned int level, const char *file, int line, #else /* !CONFIG_SND_DEBUG */ #define snd_printd(fmt, args...) do { } while (0) +#define _snd_printd(level, fmt, args...) do { } while (0) #define snd_BUG() do { } while (0) static inline int __snd_bug_on(int cond) { diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c index b58b4b1687fa..4c054f4486b9 100644 --- a/sound/pci/hda/hda_eld.c +++ b/sound/pci/hda/hda_eld.c @@ -418,7 +418,7 @@ static void hdmi_show_short_audio_desc(struct cea_sad *a) else buf2[0] = '\0'; - printk(KERN_INFO "HDMI: supports coding type %s:" + _snd_printd(SND_PR_VERBOSE, "HDMI: supports coding type %s:" " channels = %d, rates =%s%s\n", cea_audio_coding_type_names[a->format], a->channels, @@ -442,14 +442,14 @@ void snd_hdmi_show_eld(struct hdmi_eld *e) { int i; - printk(KERN_INFO "HDMI: detected monitor %s at connection type %s\n", + _snd_printd(SND_PR_VERBOSE, "HDMI: detected monitor %s at connection type %s\n", e->monitor_name, eld_connection_type_names[e->conn_type]); if (e->spk_alloc) { char buf[SND_PRINT_CHANNEL_ALLOCATION_ADVISED_BUFSIZE]; snd_print_channel_allocation(e->spk_alloc, buf, sizeof(buf)); - printk(KERN_INFO "HDMI: available speakers:%s\n", buf); + _snd_printd(SND_PR_VERBOSE, "HDMI: available speakers:%s\n", buf); } for (i = 0; i < e->sad_count; i++) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 540cd13f7f15..83f345f3c961 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -757,8 +757,6 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) struct hdmi_spec *spec = codec->spec; int tag = res >> AC_UNSOL_RES_TAG_SHIFT; int pin_nid; - int pd = !!(res & AC_UNSOL_RES_PD); - int eldv = !!(res & AC_UNSOL_RES_ELDV); int pin_idx; struct hda_jack_tbl *jack; @@ -768,9 +766,10 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) pin_nid = jack->nid; jack->jack_dirty = 1; - printk(KERN_INFO + _snd_printd(SND_PR_VERBOSE, "HDMI hot plug event: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n", - codec->addr, pin_nid, pd, eldv); + codec->addr, pin_nid, + !!(res & AC_UNSOL_RES_PD), !!(res & AC_UNSOL_RES_ELDV)); pin_idx = pin_nid_to_pin_index(spec, pin_nid); if (pin_idx < 0) @@ -992,7 +991,7 @@ static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) if (eld->monitor_present) eld_valid = !!(present & AC_PINSENSE_ELDV); - printk(KERN_INFO + _snd_printd(SND_PR_VERBOSE, "HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n", codec->addr, pin_nid, eld->monitor_present, eld_valid); -- cgit v1.2.3 From a699e4e49ec3fb62c4a44394357d14081df10bef Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 3 Apr 2012 07:11:04 -0600 Subject: irq: Kill pointless irqd_to_hw export It makes no sense to export this trivial function. Make it a static inline instead. This patch also drops virq_to_hw from arch/c6x since it is unused by that architecture. v2: Move irq_hw_number_t into types.h to fix ARM build failure Signed-off-by: Grant Likely Acked-by: Thomas Gleixner Cc: Benjamin Herrenschmidt --- arch/c6x/include/asm/irq.h | 4 ---- arch/c6x/kernel/irq.c | 13 ------------- arch/powerpc/include/asm/irq.h | 2 -- arch/powerpc/kernel/irq.c | 6 ------ include/linux/irq.h | 5 +++++ include/linux/irqdomain.h | 6 ------ include/linux/types.h | 6 ++++++ 7 files changed, 11 insertions(+), 31 deletions(-) (limited to 'include') diff --git a/arch/c6x/include/asm/irq.h b/arch/c6x/include/asm/irq.h index f13b78d5e1ca..ab4577f93d96 100644 --- a/arch/c6x/include/asm/irq.h +++ b/arch/c6x/include/asm/irq.h @@ -42,10 +42,6 @@ /* This number is used when no interrupt has been assigned */ #define NO_IRQ 0 -struct irq_data; -extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d); -extern irq_hw_number_t virq_to_hw(unsigned int virq); - extern void __init init_pic_c64xplus(void); extern void init_IRQ(void); diff --git a/arch/c6x/kernel/irq.c b/arch/c6x/kernel/irq.c index 65b8ddf54b44..c90fb5e82ad7 100644 --- a/arch/c6x/kernel/irq.c +++ b/arch/c6x/kernel/irq.c @@ -130,16 +130,3 @@ int arch_show_interrupts(struct seq_file *p, int prec) seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count); return 0; } - -irq_hw_number_t irqd_to_hwirq(struct irq_data *d) -{ - return d->hwirq; -} -EXPORT_SYMBOL_GPL(irqd_to_hwirq); - -irq_hw_number_t virq_to_hw(unsigned int virq) -{ - struct irq_data *irq_data = irq_get_irq_data(virq); - return WARN_ON(!irq_data) ? 0 : irq_data->hwirq; -} -EXPORT_SYMBOL_GPL(virq_to_hw); diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index cf417e510736..e648af92ced1 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -33,8 +33,6 @@ extern atomic_t ppc_n_lost_interrupts; /* Same thing, used by the generic IRQ code */ #define NR_IRQS_LEGACY NUM_ISA_INTERRUPTS -struct irq_data; -extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d); extern irq_hw_number_t virq_to_hw(unsigned int virq); /** diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 243dbabfe74d..5ec1b2354ca6 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -560,12 +560,6 @@ void do_softirq(void) local_irq_restore(flags); } -irq_hw_number_t irqd_to_hwirq(struct irq_data *d) -{ - return d->hwirq; -} -EXPORT_SYMBOL_GPL(irqd_to_hwirq); - irq_hw_number_t virq_to_hw(unsigned int virq) { struct irq_data *irq_data = irq_get_irq_data(virq); diff --git a/include/linux/irq.h b/include/linux/irq.h index bff29c58da23..7810406f3d80 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -263,6 +263,11 @@ static inline void irqd_clr_chained_irq_inprogress(struct irq_data *d) d->state_use_accessors &= ~IRQD_IRQ_INPROGRESS; } +static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d) +{ + return d->hwirq; +} + /** * struct irq_chip - hardware interrupt chip descriptor * diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index ead4a4215797..ac17b9b2e7be 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -42,12 +42,6 @@ struct of_device_id; /* Number of irqs reserved for a legacy isa controller */ #define NUM_ISA_INTERRUPTS 16 -/* This type is the placeholder for a hardware interrupt number. It has to - * be big enough to enclose whatever representation is used by a given - * platform. - */ -typedef unsigned long irq_hw_number_t; - /** * struct irq_domain_ops - Methods for irq_domain objects * @match: Match an interrupt controller device node to a host, returns diff --git a/include/linux/types.h b/include/linux/types.h index e5fa50345516..7f480db60231 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -210,6 +210,12 @@ typedef u32 phys_addr_t; typedef phys_addr_t resource_size_t; +/* + * This type is the placeholder for a hardware interrupt number. It has to be + * big enough to enclose whatever representation is used by a given platform. + */ +typedef unsigned long irq_hw_number_t; + typedef struct { int counter; } atomic_t; -- cgit v1.2.3 From 6069a4c988d75c0fb309fa7da0909df2a222a65e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 30 Jan 2012 11:43:52 -0800 Subject: vgaarb.h: fix build warnings Fix build warnings by providing a struct stub since no fields of the struct are used: include/linux/vgaarb.h:66:9: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:66:9: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/vgaarb.h:99:34: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:109:6: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:121:8: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:140:37: warning: 'struct pci_dev' declared inside parameter list Signed-off-by: Randy Dunlap Signed-off-by: Dave Airlie --- include/linux/vgaarb.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index 9c3120dca294..b572f80bdfd5 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -47,6 +47,8 @@ */ #define VGA_DEFAULT_DEVICE (NULL) +struct pci_dev; + /* For use by clients */ /** -- cgit v1.2.3 From a21d45726acacc963d8baddf74607d9b74e2b723 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 10 Apr 2012 20:30:48 +0000 Subject: tcp: avoid order-1 allocations on wifi and tx path Marc Merlin reported many order-1 allocations failures in TX path on its wireless setup, that dont make any sense with MTU=1500 network, and non SG capable hardware. After investigation, it turns out TCP uses sk_stream_alloc_skb() and used as a convention skb_tailroom(skb) to know how many bytes of data payload could be put in this skb (for non SG capable devices) Note : these skb used kmalloc-4096 (MTU=1500 + MAX_HEADER + sizeof(struct skb_shared_info) being above 2048) Later, mac80211 layer need to add some bytes at the tail of skb (IEEE80211_ENCRYPT_TAILROOM = 18 bytes) and since no more tailroom is available has to call pskb_expand_head() and request order-1 allocations. This patch changes sk_stream_alloc_skb() so that only sk->sk_prot->max_header bytes of headroom are reserved, and use a new skb field, avail_size to hold the data payload limit. This way, order-0 allocations done by TCP stack can leave more than 2 KB of tailroom and no more allocation is performed in mac80211 layer (or any layer needing some tailroom) avail_size is unioned with mark/dropcount, since mark will be set later in IP stack for output packets. Therefore, skb size is unchanged. Reported-by: Marc MERLIN Tested-by: Marc MERLIN Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 13 +++++++++++++ net/ipv4/tcp.c | 8 ++++---- net/ipv4/tcp_output.c | 2 +- 3 files changed, 18 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 33370271b8b2..70a3f8d49118 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -481,6 +481,7 @@ struct sk_buff { union { __u32 mark; __u32 dropcount; + __u32 avail_size; }; sk_buff_data_t transport_header; @@ -1365,6 +1366,18 @@ static inline int skb_tailroom(const struct sk_buff *skb) return skb_is_nonlinear(skb) ? 0 : skb->end - skb->tail; } +/** + * skb_availroom - bytes at buffer end + * @skb: buffer to check + * + * Return the number of bytes of free space at the tail of an sk_buff + * allocated by sk_stream_alloc() + */ +static inline int skb_availroom(const struct sk_buff *skb) +{ + return skb_is_nonlinear(skb) ? 0 : skb->avail_size - skb->len; +} + /** * skb_reserve - adjust headroom * @skb: buffer to alter diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 7758a83f98ff..a5daa211a8e1 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -701,11 +701,12 @@ struct sk_buff *sk_stream_alloc_skb(struct sock *sk, int size, gfp_t gfp) skb = alloc_skb_fclone(size + sk->sk_prot->max_header, gfp); if (skb) { if (sk_wmem_schedule(sk, skb->truesize)) { + skb_reserve(skb, sk->sk_prot->max_header); /* * Make sure that we have exactly size bytes * available to the caller, no more, no less. */ - skb_reserve(skb, skb_tailroom(skb) - size); + skb->avail_size = size; return skb; } __kfree_skb(skb); @@ -995,10 +996,9 @@ new_segment: copy = seglen; /* Where to copy to? */ - if (skb_tailroom(skb) > 0) { + if (skb_availroom(skb) > 0) { /* We have some space in skb head. Superb! */ - if (copy > skb_tailroom(skb)) - copy = skb_tailroom(skb); + copy = min_t(int, copy, skb_availroom(skb)); err = skb_add_data_nocache(sk, skb, from, copy); if (err) goto do_fault; diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 364784a91939..376b2cfbb685 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2060,7 +2060,7 @@ static void tcp_retrans_try_collapse(struct sock *sk, struct sk_buff *to, /* Punt if not enough space exists in the first SKB for * the data in the second */ - if (skb->len > skb_tailroom(to)) + if (skb->len > skb_availroom(to)) break; if (after(TCP_SKB_CB(skb)->end_seq, tcp_wnd_end(tp))) -- cgit v1.2.3 From 6fa6c8e25e95bdc73e92e4c96b8e3299169b616e Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 15 Feb 2012 15:06:08 -0700 Subject: irq_domain: Move irq_virq_count into NOMAP revmap This patch replaces the old global setting of irq_virq_count that is only used by the NOMAP mapping and instead uses a revmap_data property so that the maximum NOMAP allocation can be set per NOMAP irq_domain. There is exactly one user of irq_virq_count in-tree right now: PS3. Also, irq_virq_count is only useful for the NOMAP mapping. So, instead of having a single global irq_virq_count values, this change drops it entirely and added a max_irq argument to irq_domain_add_nomap(). That makes it a property of an individual nomap irq domain instead of a global system settting. Signed-off-by: Grant Likely Tested-by: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Milton Miller --- arch/powerpc/platforms/cell/axon_msi.c | 2 +- arch/powerpc/platforms/cell/beat_interrupt.c | 2 +- arch/powerpc/platforms/powermac/smp.c | 2 +- arch/powerpc/platforms/ps3/interrupt.c | 3 +-- include/linux/irqdomain.h | 6 +++-- kernel/irq/irqdomain.c | 33 ++++++++-------------------- 6 files changed, 17 insertions(+), 31 deletions(-) (limited to 'include') diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index db360fc4cf0e..d09f3e8e6867 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -392,7 +392,7 @@ static int axon_msi_probe(struct platform_device *device) } memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES); - msic->irq_domain = irq_domain_add_nomap(dn, &msic_host_ops, msic); + msic->irq_domain = irq_domain_add_nomap(dn, 0, &msic_host_ops, msic); if (!msic->irq_domain) { printk(KERN_ERR "axon_msi: couldn't allocate irq_domain for %s\n", dn->full_name); diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c index e5c3a2c6090d..f9a48af335cb 100644 --- a/arch/powerpc/platforms/cell/beat_interrupt.c +++ b/arch/powerpc/platforms/cell/beat_interrupt.c @@ -239,7 +239,7 @@ void __init beatic_init_IRQ(void) ppc_md.get_irq = beatic_get_irq; /* Allocate an irq host */ - beatic_host = irq_domain_add_nomap(NULL, &beatic_pic_host_ops, NULL); + beatic_host = irq_domain_add_nomap(NULL, 0, &beatic_pic_host_ops, NULL); BUG_ON(beatic_host == NULL); irq_set_default_host(beatic_host); } diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index a81e5a88fbdf..b4ddaa3fbb29 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -192,7 +192,7 @@ static int psurge_secondary_ipi_init(void) { int rc = -ENOMEM; - psurge_host = irq_domain_add_nomap(NULL, &psurge_host_ops, NULL); + psurge_host = irq_domain_add_nomap(NULL, 0, &psurge_host_ops, NULL); if (psurge_host) psurge_secondary_virq = irq_create_direct_mapping(psurge_host); diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 2a4ff86cc21f..5f3b23220b8e 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -753,9 +753,8 @@ void __init ps3_init_IRQ(void) unsigned cpu; struct irq_domain *host; - host = irq_domain_add_nomap(NULL, &ps3_host_ops, NULL); + host = irq_domain_add_nomap(NULL, PS3_PLUG_MAX + 1, &ps3_host_ops, NULL); irq_set_default_host(host); - irq_set_virq_count(PS3_PLUG_MAX + 1); for_each_possible_cpu(cpu) { struct ps3_private *pd = &per_cpu(ps3_private, cpu); diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index ac17b9b2e7be..c65740d76e66 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -98,6 +98,9 @@ struct irq_domain { unsigned int size; unsigned int *revmap; } linear; + struct { + unsigned int max_irq; + } nomap; struct radix_tree_root tree; } revmap_data; const struct irq_domain_ops *ops; @@ -120,6 +123,7 @@ struct irq_domain *irq_domain_add_linear(struct device_node *of_node, const struct irq_domain_ops *ops, void *host_data); struct irq_domain *irq_domain_add_nomap(struct device_node *of_node, + unsigned int max_irq, const struct irq_domain_ops *ops, void *host_data); struct irq_domain *irq_domain_add_tree(struct device_node *of_node, @@ -128,7 +132,6 @@ struct irq_domain *irq_domain_add_tree(struct device_node *of_node, extern struct irq_domain *irq_find_host(struct device_node *node); extern void irq_set_default_host(struct irq_domain *host); -extern void irq_set_virq_count(unsigned int count); static inline struct irq_domain *irq_domain_add_legacy_isa( struct device_node *of_node, @@ -140,7 +143,6 @@ static inline struct irq_domain *irq_domain_add_legacy_isa( } extern struct irq_domain *irq_find_host(struct device_node *node); extern void irq_set_default_host(struct irq_domain *host); -extern void irq_set_virq_count(unsigned int count); extern unsigned int irq_create_mapping(struct irq_domain *host, diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index eb05e40f4553..d34413e78628 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -23,7 +23,6 @@ static LIST_HEAD(irq_domain_list); static DEFINE_MUTEX(irq_domain_mutex); static DEFINE_MUTEX(revmap_trees_mutex); -static unsigned int irq_virq_count = NR_IRQS; static struct irq_domain *irq_default_domain; /** @@ -184,13 +183,16 @@ struct irq_domain *irq_domain_add_linear(struct device_node *of_node, } struct irq_domain *irq_domain_add_nomap(struct device_node *of_node, + unsigned int max_irq, const struct irq_domain_ops *ops, void *host_data) { struct irq_domain *domain = irq_domain_alloc(of_node, IRQ_DOMAIN_MAP_NOMAP, ops, host_data); - if (domain) + if (domain) { + domain->revmap_data.nomap.max_irq = max_irq ? max_irq : ~0; irq_domain_add(domain); + } return domain; } @@ -262,22 +264,6 @@ void irq_set_default_host(struct irq_domain *domain) irq_default_domain = domain; } -/** - * irq_set_virq_count() - Set the maximum number of linux irqs - * @count: number of linux irqs, capped with NR_IRQS - * - * This is mainly for use by platforms like iSeries who want to program - * the virtual irq number in the controller to avoid the reverse mapping - */ -void irq_set_virq_count(unsigned int count) -{ - pr_debug("irq: Trying to set virq count to %d\n", count); - - BUG_ON(count < NUM_ISA_INTERRUPTS); - if (count < NR_IRQS) - irq_virq_count = count; -} - static int irq_setup_virq(struct irq_domain *domain, unsigned int virq, irq_hw_number_t hwirq) { @@ -320,13 +306,12 @@ unsigned int irq_create_direct_mapping(struct irq_domain *domain) pr_debug("irq: create_direct virq allocation failed\n"); return 0; } - if (virq >= irq_virq_count) { + if (virq >= domain->revmap_data.nomap.max_irq) { pr_err("ERROR: no free irqs available below %i maximum\n", - irq_virq_count); + domain->revmap_data.nomap.max_irq); irq_free_desc(virq); return 0; } - pr_debug("irq: create_direct obtained virq %d\n", virq); if (irq_setup_virq(domain, virq, virq)) { @@ -378,7 +363,7 @@ unsigned int irq_create_mapping(struct irq_domain *domain, return irq_domain_legacy_revmap(domain, hwirq); /* Allocate a virtual interrupt number */ - hint = hwirq % irq_virq_count; + hint = hwirq % nr_irqs; if (hint == 0) hint++; virq = irq_alloc_desc_from(hint, 0); @@ -516,7 +501,7 @@ unsigned int irq_find_mapping(struct irq_domain *domain, irq_hw_number_t hwirq) { unsigned int i; - unsigned int hint = hwirq % irq_virq_count; + unsigned int hint = hwirq % nr_irqs; /* Look for default domain if nececssary */ if (domain == NULL) @@ -537,7 +522,7 @@ unsigned int irq_find_mapping(struct irq_domain *domain, if (data && (data->domain == domain) && (data->hwirq == hwirq)) return i; i++; - if (i >= irq_virq_count) + if (i >= nr_irqs) i = 1; } while(i != hint); return 0; -- cgit v1.2.3 From 490aa60ee7e884febf4818234d5c97669665db9a Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Thu, 12 Apr 2012 16:42:54 +0900 Subject: drm/exynos: fixed exynos broken ioctl this patch removes the pointer of uint64_t *edid. it should be just a uint64_t. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- include/drm/exynos_drm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h index 1bb2d4719201..e478de4e5d56 100644 --- a/include/drm/exynos_drm.h +++ b/include/drm/exynos_drm.h @@ -85,7 +85,7 @@ struct drm_exynos_gem_mmap { struct drm_exynos_vidi_connection { unsigned int connection; unsigned int extensions; - uint64_t *edid; + uint64_t edid; }; struct drm_exynos_plane_set_zpos { -- cgit v1.2.3 From 69349c2dc01c489eccaa4c472542c08e370c6d7e Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 12 Apr 2012 19:46:32 -0400 Subject: kconfig: fix IS_ENABLED to not require all options to be defined Using IS_ENABLED() within C (vs. within CPP #if statements) in its current form requires us to actually define every possible bool/tristate Kconfig option twice (__enabled_* and __enabled_*_MODULE variants). This results in a huge autoconf.h file, on the order of 16k lines for a x86_64 defconfig. Fixing IS_ENABLED to be able to work on the smaller subset of just things that we really have defined is step one to fixing this. Which means it has to not choke when fed non-enabled options, such as: include/linux/netdevice.h:964:1: warning: "__enabled_CONFIG_FCOE_MODULE" is not defined [-Wundef] The original prototype of how to implement a C and preprocessor compatible way of doing this came from the Google+ user "comex ." in response to Linus' crowdsourcing challenge for a possible improvement on his earlier C specific solution: #define config_enabled(x) (__stringify(x)[0] == '1') In this implementation, I've chosen variable names that hopefully make how it works more understandable. Signed-off-by: Paul Gortmaker Signed-off-by: Linus Torvalds --- include/linux/kconfig.h | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h index 067eda0e4b32..be342b94c640 100644 --- a/include/linux/kconfig.h +++ b/include/linux/kconfig.h @@ -4,29 +4,43 @@ #include /* - * Helper macros to use CONFIG_ options in C expressions. Note that + * Helper macros to use CONFIG_ options in C/CPP expressions. Note that * these only work with boolean and tristate options. */ +/* + * Getting something that works in C and CPP for an arg that may or may + * not be defined is tricky. Here, if we have "#define CONFIG_BOOGER 1" + * we match on the placeholder define, insert the "0," for arg1 and generate + * the triplet (0, 1, 0). Then the last step cherry picks the 2nd arg (a one). + * When CONFIG_BOOGER is not defined, we generate a (... 1, 0) pair, and when + * the last step cherry picks the 2nd arg, we get a zero. + */ +#define __ARG_PLACEHOLDER_1 0, +#define config_enabled(cfg) _config_enabled(cfg) +#define _config_enabled(value) __config_enabled(__ARG_PLACEHOLDER_##value) +#define __config_enabled(arg1_or_junk) ___config_enabled(arg1_or_junk 1, 0) +#define ___config_enabled(__ignored, val, ...) val + /* * IS_ENABLED(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y' or 'm', * 0 otherwise. * */ #define IS_ENABLED(option) \ - (__enabled_ ## option || __enabled_ ## option ## _MODULE) + (config_enabled(option) || config_enabled(option##_MODULE)) /* * IS_BUILTIN(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y', 0 * otherwise. For boolean options, this is equivalent to * IS_ENABLED(CONFIG_FOO). */ -#define IS_BUILTIN(option) __enabled_ ## option +#define IS_BUILTIN(option) config_enabled(option) /* * IS_MODULE(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'm', 0 * otherwise. */ -#define IS_MODULE(option) __enabled_ ## option ## _MODULE +#define IS_MODULE(option) config_enabled(option##_MODULE) #endif /* __LINUX_KCONFIG_H */ -- cgit v1.2.3 From 1e45860f541497d73162305d48b638d9b87e1ae3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 13 Apr 2012 13:11:50 +0100 Subject: ARM: 7366/3: amba: Remove AMBA level regulator support The AMBA bus regulator support is being used to model on/off switches for power domains which isn't terribly idiomatic for modern kernels with the generic power domain code and creates integration problems on platforms which don't use regulators for their power domains as it's hard to tell the difference between a regulator that is needed but failed to be provided and one that isn't supposed to be there (though DT does make that easier). Platforms that wish to use the regulator API to manage their power domains can indirect via the power domain interface. This feature is only used with the vape supply of the db8500 PRCMU driver which supplies the UARTs and MMC controllers, none of which have support for managing vcore at runtime in mainline (only pl022 SPI controller does). Update that supply to have an always_on constraint until the power domain support for the system is updated so that it is enabled for these users, this is likely to have no impact on practical systems as probably at least one of these devices will be active and cause AMBA to hold the supply on anyway. Signed-off-by: Mark Brown Acked-by: Linus Walleij Tested-by: Shawn Guo Signed-off-by: Russell King --- drivers/amba/bus.c | 42 +----------------------------------------- drivers/mfd/db8500-prcmu.c | 1 + drivers/spi/spi-pl022.c | 2 -- include/linux/amba/bus.h | 7 ------- 4 files changed, 2 insertions(+), 50 deletions(-) (limited to 'include') diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index 01c2cf4efcdd..cc273226dbd0 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -247,8 +247,7 @@ static int amba_pm_restore(struct device *dev) /* * Hooks to provide runtime PM of the pclk (bus clock). It is safe to * enable/disable the bus clock at runtime PM suspend/resume as this - * does not result in loss of context. However, disabling vcore power - * would do, so we leave that to the driver. + * does not result in loss of context. */ static int amba_pm_runtime_suspend(struct device *dev) { @@ -354,39 +353,6 @@ static void amba_put_disable_pclk(struct amba_device *pcdev) clk_put(pclk); } -static int amba_get_enable_vcore(struct amba_device *pcdev) -{ - struct regulator *vcore = regulator_get(&pcdev->dev, "vcore"); - int ret; - - pcdev->vcore = vcore; - - if (IS_ERR(vcore)) { - /* It is OK not to supply a vcore regulator */ - if (PTR_ERR(vcore) == -ENODEV) - return 0; - return PTR_ERR(vcore); - } - - ret = regulator_enable(vcore); - if (ret) { - regulator_put(vcore); - pcdev->vcore = ERR_PTR(-ENODEV); - } - - return ret; -} - -static void amba_put_disable_vcore(struct amba_device *pcdev) -{ - struct regulator *vcore = pcdev->vcore; - - if (!IS_ERR(vcore)) { - regulator_disable(vcore); - regulator_put(vcore); - } -} - /* * These are the device model conversion veneers; they convert the * device model structures to our more specific structures. @@ -399,10 +365,6 @@ static int amba_probe(struct device *dev) int ret; do { - ret = amba_get_enable_vcore(pcdev); - if (ret) - break; - ret = amba_get_enable_pclk(pcdev); if (ret) break; @@ -420,7 +382,6 @@ static int amba_probe(struct device *dev) pm_runtime_put_noidle(dev); amba_put_disable_pclk(pcdev); - amba_put_disable_vcore(pcdev); } while (0); return ret; @@ -442,7 +403,6 @@ static int amba_remove(struct device *dev) pm_runtime_put_noidle(dev); amba_put_disable_pclk(pcdev); - amba_put_disable_vcore(pcdev); return ret; } diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index ebc1e8658226..5be32489714f 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -2788,6 +2788,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .constraints = { .name = "db8500-vape", .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .always_on = true, }, .consumer_supplies = db8500_vape_consumers, .num_consumer_supplies = ARRAY_SIZE(db8500_vape_consumers), diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 96f0da66b185..09c925aaf320 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2195,7 +2195,6 @@ static int pl022_runtime_suspend(struct device *dev) struct pl022 *pl022 = dev_get_drvdata(dev); clk_disable(pl022->clk); - amba_vcore_disable(pl022->adev); return 0; } @@ -2204,7 +2203,6 @@ static int pl022_runtime_resume(struct device *dev) { struct pl022 *pl022 = dev_get_drvdata(dev); - amba_vcore_enable(pl022->adev); clk_enable(pl022->clk); return 0; diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 7847e197730a..8d54f79457ba 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -30,7 +30,6 @@ struct amba_device { struct device dev; struct resource res; struct clk *pclk; - struct regulator *vcore; u64 dma_mask; unsigned int periphid; unsigned int irq[AMBA_NR_IRQS]; @@ -75,12 +74,6 @@ void amba_release_regions(struct amba_device *); #define amba_pclk_disable(d) \ do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0) -#define amba_vcore_enable(d) \ - (IS_ERR((d)->vcore) ? 0 : regulator_enable((d)->vcore)) - -#define amba_vcore_disable(d) \ - do { if (!IS_ERR((d)->vcore)) regulator_disable((d)->vcore); } while (0) - /* Some drivers don't use the struct amba_device */ #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff) #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) -- cgit v1.2.3 From 2084c24a81413b75bc97e4bee56b32ffece70460 Mon Sep 17 00:00:00 2001 From: Lubos Lunak Date: Wed, 21 Mar 2012 14:08:24 +0100 Subject: do not export kernel's NULL #define to userspace MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GCC's NULL is actually __null, which allows detecting some questionable NULL usage and warn about it. Moreover each platform/compiler should have its own stddef.h anyway (which is different from linux/stddef.h). So there's no good reason to leak kernel's NULL to userspace and override what the compiler provides. Signed-off-by: Luboš Luňák Acked-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- include/linux/stddef.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/stddef.h b/include/linux/stddef.h index 6a40c76bdcf1..1747b6787b9e 100644 --- a/include/linux/stddef.h +++ b/include/linux/stddef.h @@ -3,14 +3,10 @@ #include +#ifdef __KERNEL__ + #undef NULL -#if defined(__cplusplus) -#define NULL 0 -#else #define NULL ((void *)0) -#endif - -#ifdef __KERNEL__ enum { false = 0, -- cgit v1.2.3 From 919f797a4c9c22ff5ec059744dba364dc600ece2 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Sat, 14 Apr 2012 23:01:28 -0400 Subject: SCSI: Fix error handling when no ULD is attached Commit 18a4d0a22ed6 ("[SCSI] Handle disk devices which can not process medium access commands") introduced a bug in which we would attempt to dereference the scsi driver even when the device had no ULD attached. Ensure that a driver is registered and make the driver accessor function more resilient to errors during device discovery. Reported-by: Elric Fu Reported-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Linus Torvalds --- drivers/scsi/scsi_error.c | 2 +- include/scsi/scsi_cmnd.h | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 2cfcbffa41fd..386f0c53bea7 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -835,7 +835,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, scsi_eh_restore_cmnd(scmd, &ses); - if (sdrv->eh_action) + if (sdrv && sdrv->eh_action) rtn = sdrv->eh_action(scmd, cmnd, cmnd_size, rtn); return rtn; diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 377df4a28512..1e1198546c72 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -134,6 +134,9 @@ struct scsi_cmnd { static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) { + if (!cmd->request->rq_disk) + return NULL; + return *(struct scsi_driver **)cmd->request->rq_disk->private_data; } -- cgit v1.2.3