From 92a47674f57b4a84a43ce93b0dfdb596c0543749 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Mon, 11 Apr 2011 23:34:37 -0700 Subject: Input: gpio_keys - add support for EV_ABS With this patch you can setup a group of GPIOs representing a specific position on an EV_ABS axis. Signed-off-by: Alexander Stein Signed-off-by: Dmitry Torokhov --- include/linux/gpio_keys.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h index dd1a56fbe924..3204edfe6b19 100644 --- a/include/linux/gpio_keys.h +++ b/include/linux/gpio_keys.h @@ -3,14 +3,15 @@ struct gpio_keys_button { /* Configuration parameters */ - int code; /* input event code (KEY_*, SW_*) */ + unsigned int code; /* input event code (KEY_*, SW_*) */ int gpio; int active_low; - char *desc; - int type; /* input event type (EV_KEY, EV_SW) */ + const char *desc; + unsigned int type; /* input event type (EV_KEY, EV_SW, EV_ABS) */ int wakeup; /* configure the button as a wake-up source */ int debounce_interval; /* debounce ticks interval in msecs */ bool can_disable; + int value; /* axis value for EV_ABS */ }; struct gpio_keys_platform_data { -- cgit v1.2.3 From 467112777c462a592c27338eeea5d1a320e82b5f Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Mon, 11 Apr 2011 23:34:48 -0700 Subject: Input: gpio-keys - add support for setting device name This patch allows to set a device name which helps distinguishing several gpio-keys devices. Signed-off-by: Alexander Stein Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/gpio_keys.c | 2 +- include/linux/gpio_keys.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 73e58a96ab99..6e6145b9a4c1 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -473,7 +473,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) platform_set_drvdata(pdev, ddata); input_set_drvdata(input, ddata); - input->name = pdev->name; + input->name = pdata->name ? : pdev->name; input->phys = "gpio-keys/input0"; input->dev.parent = &pdev->dev; input->open = gpio_keys_open; diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h index 3204edfe6b19..b5ca4b2c08ec 100644 --- a/include/linux/gpio_keys.h +++ b/include/linux/gpio_keys.h @@ -22,6 +22,7 @@ struct gpio_keys_platform_data { unsigned int rep:1; /* enable input subsystem auto repeat */ int (*enable)(struct device *dev); void (*disable)(struct device *dev); + const char *name; /* input device name */ }; #endif -- cgit v1.2.3 From e70bdd41bd0ead91b4a43e9d656ac1569d7c8779 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 11 May 2011 16:35:30 -0700 Subject: Input: rotary-encoder - add support for half-period encoders Add support for encoders that have two detents per input signal period. Signed-off-by: Johan Hovold Acked-by: Daniel Mack Signed-off-by: Dmitry Torokhov --- Documentation/input/rotary-encoder.txt | 13 +++++++++++ drivers/input/misc/rotary_encoder.c | 42 +++++++++++++++++++++++++++++++--- include/linux/rotary_encoder.h | 1 + 3 files changed, 53 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt index 943e8f6f2b15..92e68bce13a4 100644 --- a/Documentation/input/rotary-encoder.txt +++ b/Documentation/input/rotary-encoder.txt @@ -9,6 +9,9 @@ peripherals with two wires. The outputs are phase-shifted by 90 degrees and by triggering on falling and rising edges, the turn direction can be determined. +Some encoders have both outputs low in stable states, whereas others also have +a stable state with both outputs high (half-period mode). + The phase diagram of these two outputs look like this: _____ _____ _____ @@ -26,6 +29,8 @@ The phase diagram of these two outputs look like this: |<-------->| one step + |<-->| + one step (half-period mode) For more information, please see http://en.wikipedia.org/wiki/Rotary_encoder @@ -34,6 +39,13 @@ For more information, please see 1. Events / state machine ------------------------- +In half-period mode, state a) and c) above are used to determine the +rotational direction based on the last stable state. Events are reported in +states b) and d) given that the new stable state is different from the last +(i.e. the rotation was not reversed half-way). + +Otherwise, the following apply: + a) Rising edge on channel A, channel B in low state This state is used to recognize a clockwise turn @@ -96,6 +108,7 @@ static struct rotary_encoder_platform_data my_rotary_encoder_info = { .gpio_b = GPIO_ROTARY_B, .inverted_a = 0, .inverted_b = 0, + .half_period = false, }; static struct platform_device rotary_encoder_device = { diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c index 077b80bdca69..2c8b84dd9dac 100644 --- a/drivers/input/misc/rotary_encoder.c +++ b/drivers/input/misc/rotary_encoder.c @@ -2,6 +2,7 @@ * rotary_encoder.c * * (c) 2009 Daniel Mack + * Copyright (C) 2011 Johan Hovold * * state machine code inspired by code from Tim Ruetz * @@ -38,6 +39,8 @@ struct rotary_encoder { bool armed; unsigned char dir; /* 0 - clockwise, 1 - CCW */ + + char last_stable; }; static int rotary_encoder_get_state(struct rotary_encoder_platform_data *pdata) @@ -112,11 +115,37 @@ static irqreturn_t rotary_encoder_irq(int irq, void *dev_id) return IRQ_HANDLED; } +static irqreturn_t rotary_encoder_half_period_irq(int irq, void *dev_id) +{ + struct rotary_encoder *encoder = dev_id; + int state; + + state = rotary_encoder_get_state(encoder->pdata); + + switch (state) { + case 0x00: + case 0x03: + if (state != encoder->last_stable) { + rotary_encoder_report_event(encoder); + encoder->last_stable = state; + } + break; + + case 0x01: + case 0x02: + encoder->dir = (encoder->last_stable + state) & 0x01; + break; + } + + return IRQ_HANDLED; +} + static int __devinit rotary_encoder_probe(struct platform_device *pdev) { struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data; struct rotary_encoder *encoder; struct input_dev *input; + irq_handler_t handler; int err; if (!pdata) { @@ -187,7 +216,14 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev) } /* request the IRQs */ - err = request_irq(encoder->irq_a, &rotary_encoder_irq, + if (pdata->half_period) { + handler = &rotary_encoder_half_period_irq; + encoder->last_stable = rotary_encoder_get_state(pdata); + } else { + handler = &rotary_encoder_irq; + } + + err = request_irq(encoder->irq_a, handler, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, DRV_NAME, encoder); if (err) { @@ -196,7 +232,7 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev) goto exit_free_gpio_b; } - err = request_irq(encoder->irq_b, &rotary_encoder_irq, + err = request_irq(encoder->irq_b, handler, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, DRV_NAME, encoder); if (err) { @@ -264,5 +300,5 @@ module_exit(rotary_encoder_exit); MODULE_ALIAS("platform:" DRV_NAME); MODULE_DESCRIPTION("GPIO rotary encoder driver"); -MODULE_AUTHOR("Daniel Mack "); +MODULE_AUTHOR("Daniel Mack , Johan Hovold"); MODULE_LICENSE("GPL v2"); diff --git a/include/linux/rotary_encoder.h b/include/linux/rotary_encoder.h index 215278b8df2a..3f594dce5716 100644 --- a/include/linux/rotary_encoder.h +++ b/include/linux/rotary_encoder.h @@ -10,6 +10,7 @@ struct rotary_encoder_platform_data { unsigned int inverted_b; bool relative_axis; bool rollover; + bool half_period; }; #endif /* __ROTARY_ENCODER_H__ */ -- cgit v1.2.3 From ebcaaad9d5e8fd284b8dcf25a24999420f0f56d8 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Wed, 11 May 2011 16:24:08 -0700 Subject: Input: ads7846 - add possibility to use external vref on ads7846 Just set vref_mv in your platform config to use external vref. Otherwise the internal one is used. Signed-off-by: Alexander Stein Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ads7846.c | 19 +++++++++++-------- include/linux/spi/ads7846.h | 3 ++- 2 files changed, 13 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index c24946f51256..e4ee43e159d2 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -109,6 +109,7 @@ struct ads7846 { u16 pressure_max; bool swap_xy; + bool use_internal; struct ads7846_packet *packet; @@ -300,7 +301,6 @@ static int ads7846_read12_ser(struct device *dev, unsigned command) struct ads7846 *ts = dev_get_drvdata(dev); struct ser_req *req; int status; - int use_internal; req = kzalloc(sizeof *req, GFP_KERNEL); if (!req) @@ -308,11 +308,8 @@ static int ads7846_read12_ser(struct device *dev, unsigned command) spi_message_init(&req->msg); - /* FIXME boards with ads7846 might use external vref instead ... */ - use_internal = (ts->model == 7846); - /* maybe turn on internal vREF, and let it settle */ - if (use_internal) { + if (ts->use_internal) { req->ref_on = REF_ON; req->xfer[0].tx_buf = &req->ref_on; req->xfer[0].len = 1; @@ -324,8 +321,14 @@ static int ads7846_read12_ser(struct device *dev, unsigned command) /* for 1uF, settle for 800 usec; no cap, 100 usec. */ req->xfer[1].delay_usecs = ts->vref_delay_usecs; spi_message_add_tail(&req->xfer[1], &req->msg); + + /* Enable reference voltage */ + command |= ADS_PD10_REF_ON; } + /* Enable ADC in every case */ + command |= ADS_PD10_ADC_ON; + /* take sample */ req->command = (u8) command; req->xfer[2].tx_buf = &req->command; @@ -409,7 +412,7 @@ name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \ { \ struct ads7846 *ts = dev_get_drvdata(dev); \ ssize_t v = ads7846_read12_ser(dev, \ - READ_12BIT_SER(var) | ADS_PD10_ALL_ON); \ + READ_12BIT_SER(var)); \ if (v < 0) \ return v; \ return sprintf(buf, "%u\n", adjust(ts, v)); \ @@ -502,6 +505,7 @@ static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts) if (!ts->vref_mv) { dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n"); ts->vref_mv = 2500; + ts->use_internal = true; } break; case 7845: @@ -1333,8 +1337,7 @@ static int __devinit ads7846_probe(struct spi_device *spi) if (ts->model == 7845) ads7845_read12_ser(&spi->dev, PWRDOWN); else - (void) ads7846_read12_ser(&spi->dev, - READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON); + (void) ads7846_read12_ser(&spi->dev, READ_12BIT_SER(vaux)); err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group); if (err) diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index 92bd0839d5b4..c64de9dd7631 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -14,7 +14,8 @@ enum ads7846_filter { struct ads7846_platform_data { u16 model; /* 7843, 7845, 7846, 7873. */ u16 vref_delay_usecs; /* 0 for external vref; etc */ - u16 vref_mv; /* external vref value, milliVolts */ + u16 vref_mv; /* external vref value, milliVolts + * ads7846: if 0, use internal vref */ bool keep_vref_on; /* set to keep vref on for differential * measurements as well */ bool swap_xy; /* swap x and y axes */ -- cgit v1.2.3 From 36682b81de32090f5c9fac165e71ab8939aab8c0 Mon Sep 17 00:00:00 2001 From: Zhang Jiejing Date: Wed, 11 May 2011 14:32:01 -0700 Subject: Input: add driver FSL MPR121 capacitive touch sensor This patch adds basic support for Freescale MPR121 capacitive touch sensor. It's an i2c controller with up to 12 capacitance sensing inputs. Product information (data sheet, application notes) can be found here: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPR121 Signed-off-by: Zhang Jiejing Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 12 ++ drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/mpr121_touchkey.c | 339 +++++++++++++++++++++++++++++++ include/linux/i2c/mpr121_touchkey.h | 20 ++ 4 files changed, 372 insertions(+) create mode 100644 drivers/input/keyboard/mpr121_touchkey.c create mode 100644 include/linux/i2c/mpr121_touchkey.h (limited to 'include') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b16bed038f72..dec090ac7d31 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -325,6 +325,18 @@ config KEYBOARD_MCS To compile this driver as a module, choose M here: the module will be called mcs_touchkey. +config KEYBOARD_MPR121 + tristate "Freescale MPR121 Touchkey" + depends on I2C + help + Say Y here if you have Freescale MPR121 touchkey controller + chip in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mpr121_touchkey. + config KEYBOARD_IMX tristate "IMX keypad support" depends on ARCH_MXC diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 878e6c20deb0..b45361009f2e 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o +obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c new file mode 100644 index 000000000000..0a9e81194888 --- /dev/null +++ b/drivers/input/keyboard/mpr121_touchkey.c @@ -0,0 +1,339 @@ +/* + * Touchkey driver for Freescale MPR121 Controllor + * + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Author: Zhang Jiejing + * + * Based on mcs_touchkey.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Register definitions */ +#define ELE_TOUCH_STATUS_0_ADDR 0x0 +#define ELE_TOUCH_STATUS_1_ADDR 0X1 +#define MHD_RISING_ADDR 0x2b +#define NHD_RISING_ADDR 0x2c +#define NCL_RISING_ADDR 0x2d +#define FDL_RISING_ADDR 0x2e +#define MHD_FALLING_ADDR 0x2f +#define NHD_FALLING_ADDR 0x30 +#define NCL_FALLING_ADDR 0x31 +#define FDL_FALLING_ADDR 0x32 +#define ELE0_TOUCH_THRESHOLD_ADDR 0x41 +#define ELE0_RELEASE_THRESHOLD_ADDR 0x42 +#define AFE_CONF_ADDR 0x5c +#define FILTER_CONF_ADDR 0x5d + +/* + * ELECTRODE_CONF_ADDR: This register configures the number of + * enabled capacitance sensing inputs and its run/suspend mode. + */ +#define ELECTRODE_CONF_ADDR 0x5e +#define AUTO_CONFIG_CTRL_ADDR 0x7b +#define AUTO_CONFIG_USL_ADDR 0x7d +#define AUTO_CONFIG_LSL_ADDR 0x7e +#define AUTO_CONFIG_TL_ADDR 0x7f + +/* Threshold of touch/release trigger */ +#define TOUCH_THRESHOLD 0x0f +#define RELEASE_THRESHOLD 0x0a +/* Masks for touch and release triggers */ +#define TOUCH_STATUS_MASK 0xfff +/* MPR121 has 12 keys */ +#define MPR121_MAX_KEY_COUNT 12 + +struct mpr121_touchkey { + struct i2c_client *client; + struct input_dev *input_dev; + unsigned int key_val; + unsigned int statusbits; + unsigned int keycount; + u16 keycodes[MPR121_MAX_KEY_COUNT]; +}; + +struct mpr121_init_register { + int addr; + u8 val; +}; + +static const struct mpr121_init_register init_reg_table[] __devinitconst = { + { MHD_RISING_ADDR, 0x1 }, + { NHD_RISING_ADDR, 0x1 }, + { MHD_FALLING_ADDR, 0x1 }, + { NHD_FALLING_ADDR, 0x1 }, + { NCL_FALLING_ADDR, 0xff }, + { FDL_FALLING_ADDR, 0x02 }, + { FILTER_CONF_ADDR, 0x04 }, + { AFE_CONF_ADDR, 0x0b }, + { AUTO_CONFIG_CTRL_ADDR, 0x0b }, +}; + +static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id) +{ + struct mpr121_touchkey *mpr121 = dev_id; + struct i2c_client *client = mpr121->client; + struct input_dev *input = mpr121->input_dev; + unsigned int key_num, key_val, pressed; + int reg; + + reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR); + if (reg < 0) { + dev_err(&client->dev, "i2c read error [%d]\n", reg); + goto out; + } + + reg <<= 8; + reg |= i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_0_ADDR); + if (reg < 0) { + dev_err(&client->dev, "i2c read error [%d]\n", reg); + goto out; + } + + reg &= TOUCH_STATUS_MASK; + /* use old press bit to figure out which bit changed */ + key_num = ffs(reg ^ mpr121->statusbits) - 1; + pressed = reg & (1 << key_num); + mpr121->statusbits = reg; + + key_val = mpr121->keycodes[key_num]; + + input_event(input, EV_MSC, MSC_SCAN, key_num); + input_report_key(input, key_val, pressed); + input_sync(input); + + dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, + pressed ? "pressed" : "released"); + +out: + return IRQ_HANDLED; +} + +static int __devinit mpr121_phys_init(const struct mpr121_platform_data *pdata, + struct mpr121_touchkey *mpr121, + struct i2c_client *client) +{ + const struct mpr121_init_register *reg; + unsigned char usl, lsl, tl; + int i, t, vdd, ret; + + /* Set up touch/release threshold for ele0-ele11 */ + for (i = 0; i <= MPR121_MAX_KEY_COUNT; i++) { + t = ELE0_TOUCH_THRESHOLD_ADDR + (i * 2); + ret = i2c_smbus_write_byte_data(client, t, TOUCH_THRESHOLD); + if (ret < 0) + goto err_i2c_write; + ret = i2c_smbus_write_byte_data(client, t + 1, + RELEASE_THRESHOLD); + if (ret < 0) + goto err_i2c_write; + } + + /* Set up init register */ + for (i = 0; i < ARRAY_SIZE(init_reg_table); i++) { + reg = &init_reg_table[i]; + ret = i2c_smbus_write_byte_data(client, reg->addr, reg->val); + if (ret < 0) + goto err_i2c_write; + } + + + /* + * Capacitance on sensing input varies and needs to be compensated. + * The internal MPR121-auto-configuration can do this if it's + * registers are set properly (based on pdata->vdd_uv). + */ + vdd = pdata->vdd_uv / 1000; + usl = ((vdd - 700) * 256) / vdd; + lsl = (usl * 65) / 100; + tl = (usl * 90) / 100; + ret = i2c_smbus_write_byte_data(client, AUTO_CONFIG_USL_ADDR, usl); + ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_LSL_ADDR, lsl); + ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_TL_ADDR, tl); + ret |= i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR, + mpr121->keycount); + if (ret != 0) + goto err_i2c_write; + + dev_dbg(&client->dev, "set up with %x keys.\n", mpr121->keycount); + + return 0; + +err_i2c_write: + dev_err(&client->dev, "i2c write error: %d\n", ret); + return ret; +} + +static int __devinit mpr_touchkey_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct mpr121_platform_data *pdata = client->dev.platform_data; + struct mpr121_touchkey *mpr121; + struct input_dev *input_dev; + int error; + int i; + + if (!pdata) { + dev_err(&client->dev, "no platform data defined\n"); + return -EINVAL; + } + + if (!pdata->keymap || !pdata->keymap_size) { + dev_err(&client->dev, "missing keymap data\n"); + return -EINVAL; + } + + if (pdata->keymap_size > MPR121_MAX_KEY_COUNT) { + dev_err(&client->dev, "too many keys defined\n"); + return -EINVAL; + } + + if (!client->irq) { + dev_err(&client->dev, "irq number should not be zero\n"); + return -EINVAL; + } + + mpr121 = kzalloc(sizeof(struct mpr121_touchkey), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!mpr121 || !input_dev) { + dev_err(&client->dev, "Failed to allocate memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + mpr121->client = client; + mpr121->input_dev = input_dev; + mpr121->keycount = pdata->keymap_size; + + input_dev->name = "Freescale MPR121 Touchkey"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + + input_dev->keycode = mpr121->keycodes; + input_dev->keycodesize = sizeof(mpr121->keycodes[0]); + input_dev->keycodemax = mpr121->keycount; + + for (i = 0; i < pdata->keymap_size; i++) { + input_set_capability(input_dev, EV_KEY, pdata->keymap[i]); + mpr121->keycodes[i] = pdata->keymap[i]; + } + + error = mpr121_phys_init(pdata, mpr121, client); + if (error) { + dev_err(&client->dev, "Failed to init register\n"); + goto err_free_mem; + } + + error = request_threaded_irq(client->irq, NULL, + mpr_touchkey_interrupt, + IRQF_TRIGGER_FALLING, + client->dev.driver->name, mpr121); + if (error) { + dev_err(&client->dev, "Failed to register interrupt\n"); + goto err_free_mem; + } + + error = input_register_device(input_dev); + if (error) + goto err_free_irq; + + i2c_set_clientdata(client, mpr121); + device_init_wakeup(&client->dev, pdata->wakeup); + + return 0; + +err_free_irq: + free_irq(client->irq, mpr121); +err_free_mem: + input_free_device(input_dev); + kfree(mpr121); + return error; +} + +static int __devexit mpr_touchkey_remove(struct i2c_client *client) +{ + struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client); + + free_irq(client->irq, mpr121); + input_unregister_device(mpr121->input_dev); + kfree(mpr121); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mpr_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR, 0x00); + + return 0; +} + +static int mpr_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR, + mpr121->keycount); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(mpr121_touchkey_pm_ops, mpr_suspend, mpr_resume); + +static const struct i2c_device_id mpr121_id[] = { + { "mpr121_touchkey", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mpr121_id); + +static struct i2c_driver mpr_touchkey_driver = { + .driver = { + .name = "mpr121", + .owner = THIS_MODULE, + .pm = &mpr121_touchkey_pm_ops, + }, + .id_table = mpr121_id, + .probe = mpr_touchkey_probe, + .remove = __devexit_p(mpr_touchkey_remove), +}; + +static int __init mpr_touchkey_init(void) +{ + return i2c_add_driver(&mpr_touchkey_driver); +} +module_init(mpr_touchkey_init); + +static void __exit mpr_touchkey_exit(void) +{ + i2c_del_driver(&mpr_touchkey_driver); +} +module_exit(mpr_touchkey_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Zhang Jiejing "); +MODULE_DESCRIPTION("Touch Key driver for Freescale MPR121 Chip"); diff --git a/include/linux/i2c/mpr121_touchkey.h b/include/linux/i2c/mpr121_touchkey.h new file mode 100644 index 000000000000..f0bcc38bbb97 --- /dev/null +++ b/include/linux/i2c/mpr121_touchkey.h @@ -0,0 +1,20 @@ +/* Header file for Freescale MPR121 Capacitive Touch Sensor */ + +#ifndef _MPR121_TOUCHKEY_H +#define _MPR121_TOUCHKEY_H + +/** + * struct mpr121_platform_data - platform data for mpr121 sensor + * @keymap: pointer to array of KEY_* values representing keymap + * @keymap_size: size of the keymap + * @wakeup: configure the button as a wake-up source + * @vdd_uv: VDD voltage in uV + */ +struct mpr121_platform_data { + const unsigned short *keymap; + unsigned int keymap_size; + bool wakeup; + int vdd_uv; +}; + +#endif /* _MPR121_TOUCHKEY_H */ -- cgit v1.2.3 From 3532cb0ca2774b05e3c660f536ba3d1b38061fc9 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 16 May 2011 23:17:34 -0700 Subject: Input: ad714x - allow platform code to specify irqflags Add option to specify irqflags in platfrom data. Also update copyright notice. Signed-off-by: Michael Hennerich Tested-by: Jean-Francois Dagenais Signed-off-by: Dmitry Torokhov --- drivers/input/misc/ad714x.c | 4 +++- include/linux/input/ad714x.h | 3 ++- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c index 0f2db45f730c..5f683ec2999e 100644 --- a/drivers/input/misc/ad714x.c +++ b/drivers/input/misc/ad714x.c @@ -1257,7 +1257,9 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq, } error = request_threaded_irq(ad714x->irq, NULL, ad714x_interrupt_thread, - IRQF_TRIGGER_FALLING, "ad714x_captouch", ad714x); + plat_data->irqflags ? + plat_data->irqflags : IRQF_TRIGGER_FALLING, + "ad714x_captouch", ad714x); if (error) { dev_err(dev, "can't allocate irq %d\n", ad714x->irq); goto err_unreg_dev; diff --git a/include/linux/input/ad714x.h b/include/linux/input/ad714x.h index 0cbe5e81482e..d388d857bf14 100644 --- a/include/linux/input/ad714x.h +++ b/include/linux/input/ad714x.h @@ -6,7 +6,7 @@ * The platform_data for the device's "struct device" holds this * information. * - * Copyright 2009 Analog Devices Inc. + * Copyright 2009-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -58,6 +58,7 @@ struct ad714x_platform_data { struct ad714x_button_plat *button; unsigned short stage_cfg_reg[STAGE_NUM][STAGE_CFGREG_NUM]; unsigned short sys_cfg_reg[SYS_CFGREG_NUM]; + unsigned long irqflags; }; #endif -- cgit v1.2.3 From 84005eb5ea2939d448047fcf6924b3b9b6ed974d Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 17 May 2011 09:31:01 -0700 Subject: Input: tsc2007 - add max_rt parameter to platform data Finger touch events or very quick stylus events on low-quality panels can cause the tsc2007 to read bogus values. Looking at oscilloscope snapshots, this seems to be caused by the touch event disappearing during the measurements. These bogus values result in misclicks, where the X and Y values deviate from the real position. Most of these misclicks can be filtered out by setting a low enough threshold for the maximum resistance (which is loosely the inverse of the pressure) allowed to consider a set of values valid. Since this behaviour is largely dependent on the type and quality of the panel, this commit introduces the max_rt parameter. The default value is kept at MAX_12BIT. Signed-off-by: Thierry Reding Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/tsc2007.c | 4 +++- include/linux/i2c/tsc2007.h | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index df4ae354969d..8c48a91a6783 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -75,6 +75,7 @@ struct tsc2007 { u16 model; u16 x_plate_ohms; + u16 max_rt; bool pendown; int irq; @@ -185,7 +186,7 @@ static void tsc2007_work(struct work_struct *work) tsc2007_read_values(ts, &tc); rt = tsc2007_calculate_pressure(ts, &tc); - if (rt > MAX_12BIT) { + if (rt > ts->max_rt) { /* * Sample found inconsistent by debouncing or pressure is * beyond the maximum. Don't report it to user space, @@ -294,6 +295,7 @@ static int __devinit tsc2007_probe(struct i2c_client *client, ts->model = pdata->model; ts->x_plate_ohms = pdata->x_plate_ohms; + ts->max_rt = pdata->max_rt ? : MAX_12BIT; ts->get_pendown_state = pdata->get_pendown_state; ts->clear_penirq = pdata->clear_penirq; diff --git a/include/linux/i2c/tsc2007.h b/include/linux/i2c/tsc2007.h index c6361fbb7bf9..d95f11347314 100644 --- a/include/linux/i2c/tsc2007.h +++ b/include/linux/i2c/tsc2007.h @@ -6,6 +6,7 @@ struct tsc2007_platform_data { u16 model; /* 2007. */ u16 x_plate_ohms; + u16 max_rt; /* max. resistance above which samples are ignored */ int (*get_pendown_state)(void); void (*clear_penirq)(void); /* If needed, clear 2nd level -- cgit v1.2.3 From 2d137c7ed25f9754f52495af570897ad993e4fe7 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 17 May 2011 09:31:33 -0700 Subject: Input: tsc2007 - add poll_delay parameter to platform data Depending on the quality of the touch panel, the time for the X-, X+, Y- and Y+ inputs to settle may vary. The poll_delay parameter can be used to override the default of 1 millisecond. Cc: Dmitry Torokhov Cc: Kwangwoo Lee Signed-off-by: Thierry Reding Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/tsc2007.c | 5 +++-- include/linux/i2c/tsc2007.h | 2 ++ 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 8c48a91a6783..faa82ddb014b 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -27,7 +27,6 @@ #include #include -#define TS_POLL_DELAY 1 /* ms delay between samples */ #define TS_POLL_PERIOD 1 /* ms delay between samples */ #define TSC2007_MEASURE_TEMP0 (0x0 << 4) @@ -76,6 +75,7 @@ struct tsc2007 { u16 model; u16 x_plate_ohms; u16 max_rt; + unsigned long poll_delay; bool pendown; int irq; @@ -242,7 +242,7 @@ static irqreturn_t tsc2007_irq(int irq, void *handle) if (!ts->get_pendown_state || likely(ts->get_pendown_state())) { disable_irq_nosync(ts->irq); schedule_delayed_work(&ts->work, - msecs_to_jiffies(TS_POLL_DELAY)); + msecs_to_jiffies(ts->poll_delay)); } if (ts->clear_penirq) @@ -296,6 +296,7 @@ static int __devinit tsc2007_probe(struct i2c_client *client, ts->model = pdata->model; ts->x_plate_ohms = pdata->x_plate_ohms; ts->max_rt = pdata->max_rt ? : MAX_12BIT; + ts->poll_delay = pdata->poll_delay ? : 1; ts->get_pendown_state = pdata->get_pendown_state; ts->clear_penirq = pdata->clear_penirq; diff --git a/include/linux/i2c/tsc2007.h b/include/linux/i2c/tsc2007.h index d95f11347314..342b130a0a98 100644 --- a/include/linux/i2c/tsc2007.h +++ b/include/linux/i2c/tsc2007.h @@ -7,6 +7,8 @@ struct tsc2007_platform_data { u16 model; /* 2007. */ u16 x_plate_ohms; u16 max_rt; /* max. resistance above which samples are ignored */ + unsigned long poll_delay; /* delay (in ms) after pen-down event + before polling starts */ int (*get_pendown_state)(void); void (*clear_penirq)(void); /* If needed, clear 2nd level -- cgit v1.2.3 From 1af38eac8cdb70dbad3086b4f1bf7296eb1b09b1 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 17 May 2011 09:32:02 -0700 Subject: Input: tsc2007 - add poll_period parameter to platform data This new parameter allows the polling frequency to be configured while keeping the default of once every millisecond. Signed-off-by: Thierry Reding Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/tsc2007.c | 6 +++--- include/linux/i2c/tsc2007.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index faa82ddb014b..87c40c79f71e 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -27,8 +27,6 @@ #include #include -#define TS_POLL_PERIOD 1 /* ms delay between samples */ - #define TSC2007_MEASURE_TEMP0 (0x0 << 4) #define TSC2007_MEASURE_AUX (0x2 << 4) #define TSC2007_MEASURE_TEMP1 (0x4 << 4) @@ -76,6 +74,7 @@ struct tsc2007 { u16 x_plate_ohms; u16 max_rt; unsigned long poll_delay; + unsigned long poll_period; bool pendown; int irq; @@ -230,7 +229,7 @@ static void tsc2007_work(struct work_struct *work) out: if (ts->pendown || debounced) schedule_delayed_work(&ts->work, - msecs_to_jiffies(TS_POLL_PERIOD)); + msecs_to_jiffies(ts->poll_period)); else enable_irq(ts->irq); } @@ -297,6 +296,7 @@ static int __devinit tsc2007_probe(struct i2c_client *client, ts->x_plate_ohms = pdata->x_plate_ohms; ts->max_rt = pdata->max_rt ? : MAX_12BIT; ts->poll_delay = pdata->poll_delay ? : 1; + ts->poll_period = pdata->poll_period ? : 1; ts->get_pendown_state = pdata->get_pendown_state; ts->clear_penirq = pdata->clear_penirq; diff --git a/include/linux/i2c/tsc2007.h b/include/linux/i2c/tsc2007.h index 342b130a0a98..a51dac081aca 100644 --- a/include/linux/i2c/tsc2007.h +++ b/include/linux/i2c/tsc2007.h @@ -9,6 +9,7 @@ struct tsc2007_platform_data { u16 max_rt; /* max. resistance above which samples are ignored */ unsigned long poll_delay; /* delay (in ms) after pen-down event before polling starts */ + unsigned long poll_period; /* time (in ms) between samples */ int (*get_pendown_state)(void); void (*clear_penirq)(void); /* If needed, clear 2nd level -- cgit v1.2.3 From 891e376b1e864519bf7e49fa741f473078318530 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 17 May 2011 09:32:29 -0700 Subject: Input: tsc2007 - add X, Y and Z fuzz factors to platform data These new platform-specific values can be used to set the fuzz parameter passed to the input_set_abs_params() function for the ABS_X, ABS_Y and ABS_PRESSURE axes. Signed-off-by: Thierry Reding Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/tsc2007.c | 7 ++++--- include/linux/i2c/tsc2007.h | 3 +++ 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 87c40c79f71e..fadc11545b1e 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -310,9 +310,10 @@ static int __devinit tsc2007_probe(struct i2c_client *client, input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0); - input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, pdata->fuzzx, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, pdata->fuzzy, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, + pdata->fuzzz, 0); if (pdata->init_platform_hw) pdata->init_platform_hw(); diff --git a/include/linux/i2c/tsc2007.h b/include/linux/i2c/tsc2007.h index a51dac081aca..591427a63b06 100644 --- a/include/linux/i2c/tsc2007.h +++ b/include/linux/i2c/tsc2007.h @@ -10,6 +10,9 @@ struct tsc2007_platform_data { unsigned long poll_delay; /* delay (in ms) after pen-down event before polling starts */ unsigned long poll_period; /* time (in ms) between samples */ + int fuzzx; /* fuzz factor for X, Y and pressure axes */ + int fuzzy; + int fuzzz; int (*get_pendown_state)(void); void (*clear_penirq)(void); /* If needed, clear 2nd level -- cgit v1.2.3 From 9d2e173644bb5c42ff1b280fbdda3f195a7cf1f7 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 19 May 2011 00:59:32 -0700 Subject: Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander From http://www.analog.com/ADP5589: The ADP5589 is an I/O port expander and keypad matrix decoder designed for QWERTY type phones that require a large keypad matrix and expanded I/O lines. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 10 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/adp5589-keys.c | 771 ++++++++++++++++++++++++++++++++++ include/linux/input/adp5589.h | 213 ++++++++++ 4 files changed, 995 insertions(+) create mode 100644 drivers/input/keyboard/adp5589-keys.c create mode 100644 include/linux/input/adp5589.h (limited to 'include') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index dec090ac7d31..69badb4e06aa 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -32,6 +32,16 @@ config KEYBOARD_ADP5588 To compile this driver as a module, choose M here: the module will be called adp5588-keys. +config KEYBOARD_ADP5589 + tristate "ADP5589 I2C QWERTY Keypad and IO Expander" + depends on I2C + help + Say Y here if you want to use a ADP5589 attached to your + system I2C bus. + + To compile this driver as a module, choose M here: the + module will be called adp5589-keys. + config KEYBOARD_AMIGA tristate "Amiga keyboard" depends on AMIGA diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index b45361009f2e..c49cf8e04cd7 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_KEYBOARD_ADP5520) += adp5520-keys.o obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o +obj-$(CONFIG_KEYBOARD_ADP5589) += adp5589-keys.o obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c new file mode 100644 index 000000000000..631598663aab --- /dev/null +++ b/drivers/input/keyboard/adp5589-keys.c @@ -0,0 +1,771 @@ +/* + * Description: keypad driver for ADP5589 + * I2C QWERTY Keypad and IO Expander + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2010-2011 Analog Devices Inc. + * Licensed under the GPL-2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* GENERAL_CFG Register */ +#define OSC_EN (1 << 7) +#define CORE_CLK(x) (((x) & 0x3) << 5) +#define LCK_TRK_LOGIC (1 << 4) +#define LCK_TRK_GPI (1 << 3) +#define INT_CFG (1 << 1) +#define RST_CFG (1 << 0) + +/* INT_EN Register */ +#define LOGIC2_IEN (1 << 5) +#define LOGIC1_IEN (1 << 4) +#define LOCK_IEN (1 << 3) +#define OVRFLOW_IEN (1 << 2) +#define GPI_IEN (1 << 1) +#define EVENT_IEN (1 << 0) + +/* Interrupt Status Register */ +#define LOGIC2_INT (1 << 5) +#define LOGIC1_INT (1 << 4) +#define LOCK_INT (1 << 3) +#define OVRFLOW_INT (1 << 2) +#define GPI_INT (1 << 1) +#define EVENT_INT (1 << 0) + +/* STATUS Register */ + +#define LOGIC2_STAT (1 << 7) +#define LOGIC1_STAT (1 << 6) +#define LOCK_STAT (1 << 5) +#define KEC 0xF + +/* PIN_CONFIG_D Register */ +#define C4_EXTEND_CFG (1 << 6) /* RESET2 */ +#define R4_EXTEND_CFG (1 << 5) /* RESET1 */ + +/* LOCK_CFG */ +#define LOCK_EN (1 << 0) + +#define PTIME_MASK 0x3 +#define LTIME_MASK 0x3 + +/* Key Event Register xy */ +#define KEY_EV_PRESSED (1 << 7) +#define KEY_EV_MASK (0x7F) + +#define KEYP_MAX_EVENT 16 + +#define MAXGPIO 19 +#define ADP_BANK(offs) ((offs) >> 3) +#define ADP_BIT(offs) (1u << ((offs) & 0x7)) + +struct adp5589_kpad { + struct i2c_client *client; + struct input_dev *input; + unsigned short keycode[ADP5589_KEYMAPSIZE]; + const struct adp5589_gpi_map *gpimap; + unsigned short gpimapsize; + unsigned extend_cfg; +#ifdef CONFIG_GPIOLIB + unsigned char gpiomap[MAXGPIO]; + bool export_gpio; + struct gpio_chip gc; + struct mutex gpio_lock; /* Protect cached dir, dat_out */ + u8 dat_out[3]; + u8 dir[3]; +#endif +}; + +static int adp5589_read(struct i2c_client *client, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + dev_err(&client->dev, "Read Error\n"); + + return ret; +} + +static int adp5589_write(struct i2c_client *client, u8 reg, u8 val) +{ + return i2c_smbus_write_byte_data(client, reg, val); +} + +#ifdef CONFIG_GPIOLIB +static int adp5589_gpio_get_value(struct gpio_chip *chip, unsigned off) +{ + struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc); + unsigned int bank = ADP_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + + return !!(adp5589_read(kpad->client, ADP5589_GPI_STATUS_A + bank) & + bit); +} + +static void adp5589_gpio_set_value(struct gpio_chip *chip, + unsigned off, int val) +{ + struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc); + unsigned int bank = ADP_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + + mutex_lock(&kpad->gpio_lock); + + if (val) + kpad->dat_out[bank] |= bit; + else + kpad->dat_out[bank] &= ~bit; + + adp5589_write(kpad->client, ADP5589_GPO_DATA_OUT_A + bank, + kpad->dat_out[bank]); + + mutex_unlock(&kpad->gpio_lock); +} + +static int adp5589_gpio_direction_input(struct gpio_chip *chip, unsigned off) +{ + struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc); + unsigned int bank = ADP_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + int ret; + + mutex_lock(&kpad->gpio_lock); + + kpad->dir[bank] &= ~bit; + ret = adp5589_write(kpad->client, ADP5589_GPIO_DIRECTION_A + bank, + kpad->dir[bank]); + + mutex_unlock(&kpad->gpio_lock); + + return ret; +} + +static int adp5589_gpio_direction_output(struct gpio_chip *chip, + unsigned off, int val) +{ + struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc); + unsigned int bank = ADP_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + int ret; + + mutex_lock(&kpad->gpio_lock); + + kpad->dir[bank] |= bit; + + if (val) + kpad->dat_out[bank] |= bit; + else + kpad->dat_out[bank] &= ~bit; + + ret = adp5589_write(kpad->client, ADP5589_GPO_DATA_OUT_A + bank, + kpad->dat_out[bank]); + ret |= adp5589_write(kpad->client, ADP5589_GPIO_DIRECTION_A + bank, + kpad->dir[bank]); + + mutex_unlock(&kpad->gpio_lock); + + return ret; +} + +static int __devinit adp5589_build_gpiomap(struct adp5589_kpad *kpad, + const struct adp5589_kpad_platform_data *pdata) +{ + bool pin_used[MAXGPIO]; + int n_unused = 0; + int i; + + memset(pin_used, false, sizeof(pin_used)); + + for (i = 0; i < MAXGPIO; i++) + if (pdata->keypad_en_mask & (1 << i)) + pin_used[i] = true; + + for (i = 0; i < kpad->gpimapsize; i++) + pin_used[kpad->gpimap[i].pin - ADP5589_GPI_PIN_BASE] = true; + + if (kpad->extend_cfg & R4_EXTEND_CFG) + pin_used[4] = true; + + if (kpad->extend_cfg & C4_EXTEND_CFG) + pin_used[12] = true; + + for (i = 0; i < MAXGPIO; i++) + if (!pin_used[i]) + kpad->gpiomap[n_unused++] = i; + + return n_unused; +} + +static int __devinit adp5589_gpio_add(struct adp5589_kpad *kpad) +{ + struct device *dev = &kpad->client->dev; + const struct adp5589_kpad_platform_data *pdata = dev->platform_data; + const struct adp5589_gpio_platform_data *gpio_data = pdata->gpio_data; + int i, error; + + if (!gpio_data) + return 0; + + kpad->gc.ngpio = adp5589_build_gpiomap(kpad, pdata); + if (kpad->gc.ngpio == 0) { + dev_info(dev, "No unused gpios left to export\n"); + return 0; + } + + kpad->export_gpio = true; + + kpad->gc.direction_input = adp5589_gpio_direction_input; + kpad->gc.direction_output = adp5589_gpio_direction_output; + kpad->gc.get = adp5589_gpio_get_value; + kpad->gc.set = adp5589_gpio_set_value; + kpad->gc.can_sleep = 1; + + kpad->gc.base = gpio_data->gpio_start; + kpad->gc.label = kpad->client->name; + kpad->gc.owner = THIS_MODULE; + + mutex_init(&kpad->gpio_lock); + + error = gpiochip_add(&kpad->gc); + if (error) { + dev_err(dev, "gpiochip_add failed, err: %d\n", error); + return error; + } + + for (i = 0; i <= ADP_BANK(MAXGPIO); i++) { + kpad->dat_out[i] = adp5589_read(kpad->client, + ADP5589_GPO_DATA_OUT_A + i); + kpad->dir[i] = adp5589_read(kpad->client, + ADP5589_GPIO_DIRECTION_A + i); + } + + if (gpio_data->setup) { + error = gpio_data->setup(kpad->client, + kpad->gc.base, kpad->gc.ngpio, + gpio_data->context); + if (error) + dev_warn(dev, "setup failed, %d\n", error); + } + + return 0; +} + +static void __devexit adp5589_gpio_remove(struct adp5589_kpad *kpad) +{ + struct device *dev = &kpad->client->dev; + const struct adp5589_kpad_platform_data *pdata = dev->platform_data; + const struct adp5589_gpio_platform_data *gpio_data = pdata->gpio_data; + int error; + + if (!kpad->export_gpio) + return; + + if (gpio_data->teardown) { + error = gpio_data->teardown(kpad->client, + kpad->gc.base, kpad->gc.ngpio, + gpio_data->context); + if (error) + dev_warn(dev, "teardown failed %d\n", error); + } + + error = gpiochip_remove(&kpad->gc); + if (error) + dev_warn(dev, "gpiochip_remove failed %d\n", error); +} +#else +static inline int adp5589_gpio_add(struct adp5589_kpad *kpad) +{ + return 0; +} + +static inline void adp5589_gpio_remove(struct adp5589_kpad *kpad) +{ +} +#endif + +static void adp5589_report_switches(struct adp5589_kpad *kpad, + int key, int key_val) +{ + int i; + + for (i = 0; i < kpad->gpimapsize; i++) { + if (key_val == kpad->gpimap[i].pin) { + input_report_switch(kpad->input, + kpad->gpimap[i].sw_evt, + key & KEY_EV_PRESSED); + break; + } + } +} + +static void adp5589_report_events(struct adp5589_kpad *kpad, int ev_cnt) +{ + int i; + + for (i = 0; i < ev_cnt; i++) { + int key = adp5589_read(kpad->client, ADP5589_FIFO_1 + i); + int key_val = key & KEY_EV_MASK; + + if (key_val >= ADP5589_GPI_PIN_BASE && + key_val <= ADP5589_GPI_PIN_END) { + adp5589_report_switches(kpad, key, key_val); + } else { + input_report_key(kpad->input, + kpad->keycode[key_val - 1], + key & KEY_EV_PRESSED); + } + } +} + +static irqreturn_t adp5589_irq(int irq, void *handle) +{ + struct adp5589_kpad *kpad = handle; + struct i2c_client *client = kpad->client; + int status, ev_cnt; + + status = adp5589_read(client, ADP5589_INT_STATUS); + + if (status & OVRFLOW_INT) /* Unlikely and should never happen */ + dev_err(&client->dev, "Event Overflow Error\n"); + + if (status & EVENT_INT) { + ev_cnt = adp5589_read(client, ADP5589_STATUS) & KEC; + if (ev_cnt) { + adp5589_report_events(kpad, ev_cnt); + input_sync(kpad->input); + } + } + + adp5589_write(client, ADP5589_INT_STATUS, status); /* Status is W1C */ + + return IRQ_HANDLED; +} + +static int __devinit adp5589_get_evcode(struct adp5589_kpad *kpad, unsigned short key) +{ + int i; + + for (i = 0; i < ADP5589_KEYMAPSIZE; i++) + if (key == kpad->keycode[i]) + return (i + 1) | KEY_EV_PRESSED; + + dev_err(&kpad->client->dev, "RESET/UNLOCK key not in keycode map\n"); + + return -EINVAL; +} + +static int __devinit adp5589_setup(struct adp5589_kpad *kpad) +{ + struct i2c_client *client = kpad->client; + const struct adp5589_kpad_platform_data *pdata = + client->dev.platform_data; + int i, ret; + unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0; + unsigned char pull_mask = 0; + + ret = adp5589_write(client, ADP5589_PIN_CONFIG_A, + pdata->keypad_en_mask & 0xFF); + ret |= adp5589_write(client, ADP5589_PIN_CONFIG_B, + (pdata->keypad_en_mask >> 8) & 0xFF); + ret |= adp5589_write(client, ADP5589_PIN_CONFIG_C, + (pdata->keypad_en_mask >> 16) & 0xFF); + + if (pdata->en_keylock) { + ret |= adp5589_write(client, ADP5589_UNLOCK1, + pdata->unlock_key1); + ret |= adp5589_write(client, ADP5589_UNLOCK2, + pdata->unlock_key2); + ret |= adp5589_write(client, ADP5589_UNLOCK_TIMERS, + pdata->unlock_timer & LTIME_MASK); + ret |= adp5589_write(client, ADP5589_LOCK_CFG, LOCK_EN); + } + + for (i = 0; i < KEYP_MAX_EVENT; i++) + ret |= adp5589_read(client, ADP5589_FIFO_1 + i); + + for (i = 0; i < pdata->gpimapsize; i++) { + unsigned short pin = pdata->gpimap[i].pin; + + if (pin <= ADP5589_GPI_PIN_ROW_END) { + evt_mode1 |= (1 << (pin - ADP5589_GPI_PIN_ROW_BASE)); + } else { + evt_mode2 |= + ((1 << (pin - ADP5589_GPI_PIN_COL_BASE)) & 0xFF); + evt_mode3 |= + ((1 << (pin - ADP5589_GPI_PIN_COL_BASE)) >> 8); + } + } + + if (pdata->gpimapsize) { + ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_A, evt_mode1); + ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_B, evt_mode2); + ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_C, evt_mode3); + } + + if (pdata->pull_dis_mask & pdata->pullup_en_100k & + pdata->pullup_en_300k & pdata->pulldown_en_300k) + dev_warn(&client->dev, "Conflicting pull resistor config\n"); + + for (i = 0; i < MAXGPIO; i++) { + unsigned val = 0; + + if (pdata->pullup_en_300k & (1 << i)) + val = 0; + else if (pdata->pulldown_en_300k & (1 << i)) + val = 1; + else if (pdata->pullup_en_100k & (1 << i)) + val = 2; + else if (pdata->pull_dis_mask & (1 << i)) + val = 3; + + pull_mask |= val << (2 * (i & 0x3)); + + if ((i & 0x3) == 0x3 || i == MAXGPIO - 1) { + ret |= adp5589_write(client, + ADP5589_RPULL_CONFIG_A + (i >> 2), + pull_mask); + pull_mask = 0; + } + } + + if (pdata->reset1_key_1 && pdata->reset1_key_2 && pdata->reset1_key_3) { + ret |= adp5589_write(client, ADP5589_RESET1_EVENT_A, + adp5589_get_evcode(kpad, + pdata->reset1_key_1)); + ret |= adp5589_write(client, ADP5589_RESET1_EVENT_B, + adp5589_get_evcode(kpad, + pdata->reset1_key_2)); + ret |= adp5589_write(client, ADP5589_RESET1_EVENT_C, + adp5589_get_evcode(kpad, + pdata->reset1_key_3)); + kpad->extend_cfg |= R4_EXTEND_CFG; + } + + if (pdata->reset2_key_1 && pdata->reset2_key_2) { + ret |= adp5589_write(client, ADP5589_RESET2_EVENT_A, + adp5589_get_evcode(kpad, + pdata->reset2_key_1)); + ret |= adp5589_write(client, ADP5589_RESET2_EVENT_B, + adp5589_get_evcode(kpad, + pdata->reset2_key_2)); + kpad->extend_cfg |= C4_EXTEND_CFG; + } + + if (kpad->extend_cfg) { + ret |= adp5589_write(client, ADP5589_RESET_CFG, + pdata->reset_cfg); + ret |= adp5589_write(client, ADP5589_PIN_CONFIG_D, + kpad->extend_cfg); + } + + for (i = 0; i <= ADP_BANK(MAXGPIO); i++) + ret |= adp5589_write(client, ADP5589_DEBOUNCE_DIS_A + i, + pdata->debounce_dis_mask >> (i * 8)); + + ret |= adp5589_write(client, ADP5589_POLL_PTIME_CFG, + pdata->scan_cycle_time & PTIME_MASK); + ret |= adp5589_write(client, ADP5589_INT_STATUS, LOGIC2_INT | + LOGIC1_INT | OVRFLOW_INT | LOCK_INT | + GPI_INT | EVENT_INT); /* Status is W1C */ + + ret |= adp5589_write(client, ADP5589_GENERAL_CFG, + INT_CFG | OSC_EN | CORE_CLK(3)); + ret |= adp5589_write(client, ADP5589_INT_EN, + OVRFLOW_IEN | GPI_IEN | EVENT_IEN); + + if (ret < 0) { + dev_err(&client->dev, "Write Error\n"); + return ret; + } + + return 0; +} + +static void __devinit adp5589_report_switch_state(struct adp5589_kpad *kpad) +{ + int gpi_stat1 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_A); + int gpi_stat2 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_B); + int gpi_stat3 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_C); + int gpi_stat_tmp, pin_loc; + int i; + + for (i = 0; i < kpad->gpimapsize; i++) { + unsigned short pin = kpad->gpimap[i].pin; + + if (pin <= ADP5589_GPI_PIN_ROW_END) { + gpi_stat_tmp = gpi_stat1; + pin_loc = pin - ADP5589_GPI_PIN_ROW_BASE; + } else if ((pin - ADP5589_GPI_PIN_COL_BASE) < 8) { + gpi_stat_tmp = gpi_stat2; + pin_loc = pin - ADP5589_GPI_PIN_COL_BASE; + } else { + gpi_stat_tmp = gpi_stat3; + pin_loc = pin - ADP5589_GPI_PIN_COL_BASE - 8; + } + + if (gpi_stat_tmp < 0) { + dev_err(&kpad->client->dev, + "Can't read GPIO_DAT_STAT switch" + " %d default to OFF\n", pin); + gpi_stat_tmp = 0; + } + + input_report_switch(kpad->input, + kpad->gpimap[i].sw_evt, + !(gpi_stat_tmp & (1 << pin_loc))); + } + + input_sync(kpad->input); +} + +static int __devinit adp5589_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adp5589_kpad *kpad; + const struct adp5589_kpad_platform_data *pdata; + struct input_dev *input; + unsigned int revid; + int ret, i; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); + return -EIO; + } + + pdata = client->dev.platform_data; + if (!pdata) { + dev_err(&client->dev, "no platform data?\n"); + return -EINVAL; + } + + if (!((pdata->keypad_en_mask & 0xFF) && + (pdata->keypad_en_mask >> 8)) || !pdata->keymap) { + dev_err(&client->dev, "no rows, cols or keymap from pdata\n"); + return -EINVAL; + } + + if (pdata->keymapsize != ADP5589_KEYMAPSIZE) { + dev_err(&client->dev, "invalid keymapsize\n"); + return -EINVAL; + } + + if (!pdata->gpimap && pdata->gpimapsize) { + dev_err(&client->dev, "invalid gpimap from pdata\n"); + return -EINVAL; + } + + if (pdata->gpimapsize > ADP5589_GPIMAPSIZE_MAX) { + dev_err(&client->dev, "invalid gpimapsize\n"); + return -EINVAL; + } + + for (i = 0; i < pdata->gpimapsize; i++) { + unsigned short pin = pdata->gpimap[i].pin; + + if (pin < ADP5589_GPI_PIN_BASE || pin > ADP5589_GPI_PIN_END) { + dev_err(&client->dev, "invalid gpi pin data\n"); + return -EINVAL; + } + + if ((1 << (pin - ADP5589_GPI_PIN_ROW_BASE)) & + pdata->keypad_en_mask) { + dev_err(&client->dev, "invalid gpi row/col data\n"); + return -EINVAL; + } + } + + if (!client->irq) { + dev_err(&client->dev, "no IRQ?\n"); + return -EINVAL; + } + + kpad = kzalloc(sizeof(*kpad), GFP_KERNEL); + input = input_allocate_device(); + if (!kpad || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + kpad->client = client; + kpad->input = input; + + ret = adp5589_read(client, ADP5589_ID); + if (ret < 0) { + error = ret; + goto err_free_mem; + } + + revid = (u8) ret & ADP5589_DEVICE_ID_MASK; + + input->name = client->name; + input->phys = "adp5589-keys/input0"; + input->dev.parent = &client->dev; + + input_set_drvdata(input, kpad); + + input->id.bustype = BUS_I2C; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = revid; + + input->keycodesize = sizeof(kpad->keycode[0]); + input->keycodemax = pdata->keymapsize; + input->keycode = kpad->keycode; + + memcpy(kpad->keycode, pdata->keymap, + pdata->keymapsize * input->keycodesize); + + kpad->gpimap = pdata->gpimap; + kpad->gpimapsize = pdata->gpimapsize; + + /* setup input device */ + __set_bit(EV_KEY, input->evbit); + + if (pdata->repeat) + __set_bit(EV_REP, input->evbit); + + for (i = 0; i < input->keycodemax; i++) + __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit); + __clear_bit(KEY_RESERVED, input->keybit); + + if (kpad->gpimapsize) + __set_bit(EV_SW, input->evbit); + for (i = 0; i < kpad->gpimapsize; i++) + __set_bit(kpad->gpimap[i].sw_evt, input->swbit); + + error = input_register_device(input); + if (error) { + dev_err(&client->dev, "unable to register input device\n"); + goto err_free_mem; + } + + error = request_threaded_irq(client->irq, NULL, adp5589_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + client->dev.driver->name, kpad); + if (error) { + dev_err(&client->dev, "irq %d busy?\n", client->irq); + goto err_unreg_dev; + } + + error = adp5589_setup(kpad); + if (error) + goto err_free_irq; + + if (kpad->gpimapsize) + adp5589_report_switch_state(kpad); + + error = adp5589_gpio_add(kpad); + if (error) + goto err_free_irq; + + device_init_wakeup(&client->dev, 1); + i2c_set_clientdata(client, kpad); + + dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq); + return 0; + +err_free_irq: + free_irq(client->irq, kpad); +err_unreg_dev: + input_unregister_device(input); + input = NULL; +err_free_mem: + input_free_device(input); + kfree(kpad); + + return error; +} + +static int __devexit adp5589_remove(struct i2c_client *client) +{ + struct adp5589_kpad *kpad = i2c_get_clientdata(client); + + adp5589_write(client, ADP5589_GENERAL_CFG, 0); + free_irq(client->irq, kpad); + input_unregister_device(kpad->input); + adp5589_gpio_remove(kpad); + kfree(kpad); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int adp5589_suspend(struct device *dev) +{ + struct adp5589_kpad *kpad = dev_get_drvdata(dev); + struct i2c_client *client = kpad->client; + + disable_irq(client->irq); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int adp5589_resume(struct device *dev) +{ + struct adp5589_kpad *kpad = dev_get_drvdata(dev); + struct i2c_client *client = kpad->client; + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + enable_irq(client->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(adp5589_dev_pm_ops, adp5589_suspend, adp5589_resume); + +static const struct i2c_device_id adp5589_id[] = { + {"adp5589-keys", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, adp5589_id); + +static struct i2c_driver adp5589_driver = { + .driver = { + .name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .pm = &adp5589_dev_pm_ops, + }, + .probe = adp5589_probe, + .remove = __devexit_p(adp5589_remove), + .id_table = adp5589_id, +}; + +static int __init adp5589_init(void) +{ + return i2c_add_driver(&adp5589_driver); +} +module_init(adp5589_init); + +static void __exit adp5589_exit(void) +{ + i2c_del_driver(&adp5589_driver); +} +module_exit(adp5589_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("ADP5589 Keypad driver"); diff --git a/include/linux/input/adp5589.h b/include/linux/input/adp5589.h new file mode 100644 index 000000000000..ef792ecfaabf --- /dev/null +++ b/include/linux/input/adp5589.h @@ -0,0 +1,213 @@ +/* + * Analog Devices ADP5589 I/O Expander and QWERTY Keypad Controller + * + * Copyright 2010-2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef _ADP5589_H +#define _ADP5589_H + +#define ADP5589_ID 0x00 +#define ADP5589_INT_STATUS 0x01 +#define ADP5589_STATUS 0x02 +#define ADP5589_FIFO_1 0x03 +#define ADP5589_FIFO_2 0x04 +#define ADP5589_FIFO_3 0x05 +#define ADP5589_FIFO_4 0x06 +#define ADP5589_FIFO_5 0x07 +#define ADP5589_FIFO_6 0x08 +#define ADP5589_FIFO_7 0x09 +#define ADP5589_FIFO_8 0x0A +#define ADP5589_FIFO_9 0x0B +#define ADP5589_FIFO_10 0x0C +#define ADP5589_FIFO_11 0x0D +#define ADP5589_FIFO_12 0x0E +#define ADP5589_FIFO_13 0x0F +#define ADP5589_FIFO_14 0x10 +#define ADP5589_FIFO_15 0x11 +#define ADP5589_FIFO_16 0x12 +#define ADP5589_GPI_INT_STAT_A 0x13 +#define ADP5589_GPI_INT_STAT_B 0x14 +#define ADP5589_GPI_INT_STAT_C 0x15 +#define ADP5589_GPI_STATUS_A 0x16 +#define ADP5589_GPI_STATUS_B 0x17 +#define ADP5589_GPI_STATUS_C 0x18 +#define ADP5589_RPULL_CONFIG_A 0x19 +#define ADP5589_RPULL_CONFIG_B 0x1A +#define ADP5589_RPULL_CONFIG_C 0x1B +#define ADP5589_RPULL_CONFIG_D 0x1C +#define ADP5589_RPULL_CONFIG_E 0x1D +#define ADP5589_GPI_INT_LEVEL_A 0x1E +#define ADP5589_GPI_INT_LEVEL_B 0x1F +#define ADP5589_GPI_INT_LEVEL_C 0x20 +#define ADP5589_GPI_EVENT_EN_A 0x21 +#define ADP5589_GPI_EVENT_EN_B 0x22 +#define ADP5589_GPI_EVENT_EN_C 0x23 +#define ADP5589_GPI_INTERRUPT_EN_A 0x24 +#define ADP5589_GPI_INTERRUPT_EN_B 0x25 +#define ADP5589_GPI_INTERRUPT_EN_C 0x26 +#define ADP5589_DEBOUNCE_DIS_A 0x27 +#define ADP5589_DEBOUNCE_DIS_B 0x28 +#define ADP5589_DEBOUNCE_DIS_C 0x29 +#define ADP5589_GPO_DATA_OUT_A 0x2A +#define ADP5589_GPO_DATA_OUT_B 0x2B +#define ADP5589_GPO_DATA_OUT_C 0x2C +#define ADP5589_GPO_OUT_MODE_A 0x2D +#define ADP5589_GPO_OUT_MODE_B 0x2E +#define ADP5589_GPO_OUT_MODE_C 0x2F +#define ADP5589_GPIO_DIRECTION_A 0x30 +#define ADP5589_GPIO_DIRECTION_B 0x31 +#define ADP5589_GPIO_DIRECTION_C 0x32 +#define ADP5589_UNLOCK1 0x33 +#define ADP5589_UNLOCK2 0x34 +#define ADP5589_EXT_LOCK_EVENT 0x35 +#define ADP5589_UNLOCK_TIMERS 0x36 +#define ADP5589_LOCK_CFG 0x37 +#define ADP5589_RESET1_EVENT_A 0x38 +#define ADP5589_RESET1_EVENT_B 0x39 +#define ADP5589_RESET1_EVENT_C 0x3A +#define ADP5589_RESET2_EVENT_A 0x3B +#define ADP5589_RESET2_EVENT_B 0x3C +#define ADP5589_RESET_CFG 0x3D +#define ADP5589_PWM_OFFT_LOW 0x3E +#define ADP5589_PWM_OFFT_HIGH 0x3F +#define ADP5589_PWM_ONT_LOW 0x40 +#define ADP5589_PWM_ONT_HIGH 0x41 +#define ADP5589_PWM_CFG 0x42 +#define ADP5589_CLOCK_DIV_CFG 0x43 +#define ADP5589_LOGIC_1_CFG 0x44 +#define ADP5589_LOGIC_2_CFG 0x45 +#define ADP5589_LOGIC_FF_CFG 0x46 +#define ADP5589_LOGIC_INT_EVENT_EN 0x47 +#define ADP5589_POLL_PTIME_CFG 0x48 +#define ADP5589_PIN_CONFIG_A 0x49 +#define ADP5589_PIN_CONFIG_B 0x4A +#define ADP5589_PIN_CONFIG_C 0x4B +#define ADP5589_PIN_CONFIG_D 0x4C +#define ADP5589_GENERAL_CFG 0x4D +#define ADP5589_INT_EN 0x4E + +#define ADP5589_DEVICE_ID_MASK 0xF + +/* Put one of these structures in i2c_board_info platform_data */ + +#define ADP5589_KEYMAPSIZE 88 + +#define ADP5589_GPI_PIN_ROW0 97 +#define ADP5589_GPI_PIN_ROW1 98 +#define ADP5589_GPI_PIN_ROW2 99 +#define ADP5589_GPI_PIN_ROW3 100 +#define ADP5589_GPI_PIN_ROW4 101 +#define ADP5589_GPI_PIN_ROW5 102 +#define ADP5589_GPI_PIN_ROW6 103 +#define ADP5589_GPI_PIN_ROW7 104 +#define ADP5589_GPI_PIN_COL0 105 +#define ADP5589_GPI_PIN_COL1 106 +#define ADP5589_GPI_PIN_COL2 107 +#define ADP5589_GPI_PIN_COL3 108 +#define ADP5589_GPI_PIN_COL4 109 +#define ADP5589_GPI_PIN_COL5 110 +#define ADP5589_GPI_PIN_COL6 111 +#define ADP5589_GPI_PIN_COL7 112 +#define ADP5589_GPI_PIN_COL8 113 +#define ADP5589_GPI_PIN_COL9 114 +#define ADP5589_GPI_PIN_COL10 115 +#define GPI_LOGIC1 116 +#define GPI_LOGIC2 117 + +#define ADP5589_GPI_PIN_ROW_BASE ADP5589_GPI_PIN_ROW0 +#define ADP5589_GPI_PIN_ROW_END ADP5589_GPI_PIN_ROW7 +#define ADP5589_GPI_PIN_COL_BASE ADP5589_GPI_PIN_COL0 +#define ADP5589_GPI_PIN_COL_END ADP5589_GPI_PIN_COL10 + +#define ADP5589_GPI_PIN_BASE ADP5589_GPI_PIN_ROW_BASE +#define ADP5589_GPI_PIN_END ADP5589_GPI_PIN_COL_END + +#define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1) + +struct adp5589_gpi_map { + unsigned short pin; + unsigned short sw_evt; +}; + +/* scan_cycle_time */ +#define ADP5589_SCAN_CYCLE_10ms 0 +#define ADP5589_SCAN_CYCLE_20ms 1 +#define ADP5589_SCAN_CYCLE_30ms 2 +#define ADP5589_SCAN_CYCLE_40ms 3 + +/* RESET_CFG */ +#define RESET_PULSE_WIDTH_500us 0 +#define RESET_PULSE_WIDTH_1ms 1 +#define RESET_PULSE_WIDTH_2ms 2 +#define RESET_PULSE_WIDTH_10ms 3 + +#define RESET_TRIG_TIME_0ms (0 << 2) +#define RESET_TRIG_TIME_1000ms (1 << 2) +#define RESET_TRIG_TIME_1500ms (2 << 2) +#define RESET_TRIG_TIME_2000ms (3 << 2) +#define RESET_TRIG_TIME_2500ms (4 << 2) +#define RESET_TRIG_TIME_3000ms (5 << 2) +#define RESET_TRIG_TIME_3500ms (6 << 2) +#define RESET_TRIG_TIME_4000ms (7 << 2) + +#define RESET_PASSTHRU_EN (1 << 5) +#define RESET1_POL_HIGH (1 << 6) +#define RESET1_POL_LOW (0 << 6) +#define RESET2_POL_HIGH (1 << 7) +#define RESET2_POL_LOW (0 << 7) + +/* Mask Bits: + * C C C C C C C C C C C | R R R R R R R R + * 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0 + * 0 + * ---------------- BIT ------------------ + * 1 1 1 1 1 1 1 1 1 0 0 | 0 0 0 0 0 0 0 0 + * 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0 + */ + +#define ADP_ROW(x) (1 << (x)) +#define ADP_COL(x) (1 << (x + 8)) + +struct adp5589_kpad_platform_data { + unsigned keypad_en_mask; /* Keypad (Rows/Columns) enable mask */ + const unsigned short *keymap; /* Pointer to keymap */ + unsigned short keymapsize; /* Keymap size */ + bool repeat; /* Enable key repeat */ + bool en_keylock; /* Enable key lock feature */ + unsigned char unlock_key1; /* Unlock Key 1 */ + unsigned char unlock_key2; /* Unlock Key 2 */ + unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable */ + unsigned char scan_cycle_time; /* Time between consecutive scan cycles */ + unsigned char reset_cfg; /* Reset config */ + unsigned short reset1_key_1; /* Reset Key 1 */ + unsigned short reset1_key_2; /* Reset Key 2 */ + unsigned short reset1_key_3; /* Reset Key 3 */ + unsigned short reset2_key_1; /* Reset Key 1 */ + unsigned short reset2_key_2; /* Reset Key 2 */ + unsigned debounce_dis_mask; /* Disable debounce mask */ + unsigned pull_dis_mask; /* Disable all pull resistors mask */ + unsigned pullup_en_100k; /* Pull-Up 100k Enable Mask */ + unsigned pullup_en_300k; /* Pull-Up 300k Enable Mask */ + unsigned pulldown_en_300k; /* Pull-Down 300k Enable Mask */ + const struct adp5589_gpi_map *gpimap; + unsigned short gpimapsize; + const struct adp5589_gpio_platform_data *gpio_data; +}; + +struct i2c_client; /* forward declaration */ + +struct adp5589_gpio_platform_data { + int gpio_start; /* GPIO Chip base # */ + int (*setup)(struct i2c_client *client, + int gpio, unsigned ngpio, + void *context); + int (*teardown)(struct i2c_client *client, + int gpio, unsigned ngpio, + void *context); + void *context; +}; + +#endif -- cgit v1.2.3