From 3d7d248cf484fe37595698e0ca31a9bcecc85a42 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 13 Jun 2013 09:50:35 +0200 Subject: HID: i2c-hid: add DT bindings Add device tree based support for HID over I2C devices. Tested on an Odroid-X board with a Synaptics touchpad. Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- include/linux/i2c/i2c-hid.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/i2c/i2c-hid.h b/include/linux/i2c/i2c-hid.h index 60e411d764d4..7aa901d92058 100644 --- a/include/linux/i2c/i2c-hid.h +++ b/include/linux/i2c/i2c-hid.h @@ -19,7 +19,8 @@ * @hid_descriptor_address: i2c register where the HID descriptor is stored. * * Note that it is the responsibility of the platform driver (or the acpi 5.0 - * driver) to setup the irq related to the gpio in the struct i2c_board_info. + * driver, or the flattened device tree) to setup the irq related to the gpio in + * the struct i2c_board_info. * The platform driver should also setup the gpio according to the device: * * A typical example is the following: -- cgit v1.2.3