From 54b79248b24610663298e122c6ba3804468271fe Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Mon, 7 Nov 2005 16:25:48 -0800 Subject: [PATCH] revised Memory Add Fixes for ppc64 Add the create_section_mapping() routine to create hptes for memory sections dynamically added after system boot. Signed-off-by: Mike Kravetz Signed-off-by: Paul Mackerras --- include/asm-powerpc/sparsemem.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h index 1c95ab99deb3..58d2aab416f8 100644 --- a/include/asm-powerpc/sparsemem.h +++ b/include/asm-powerpc/sparsemem.h @@ -11,6 +11,10 @@ #define MAX_PHYSADDR_BITS 38 #define MAX_PHYSMEM_BITS 36 +#ifdef CONFIG_MEMORY_HOTPLUG +extern void create_section_mapping(unsigned long start, unsigned long end); +#endif /* CONFIG_MEMORY_HOTPLUG */ + #endif /* CONFIG_SPARSEMEM */ #endif /* _ASM_POWERPC_SPARSEMEM_H */ -- cgit v1.2.3 From 82dd26a971848efafc6c8f12803ae012d268d2eb Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Fri, 4 Nov 2005 15:20:24 -0800 Subject: [PATCH] Memory Add Fixes for ppc64 This is a temporary kludge that supports adding all new memory to node 0. I will provide a more complete solution similar to that used for dynamically added CPUs in a few days. Signed-off-by: Mike Kravetz Signed-off-by: Paul Mackerras --- include/asm-ppc64/mmzone.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/asm-ppc64/mmzone.h b/include/asm-ppc64/mmzone.h index 80a708e7093a..15e777ce0f4a 100644 --- a/include/asm-ppc64/mmzone.h +++ b/include/asm-ppc64/mmzone.h @@ -33,6 +33,9 @@ extern int numa_cpu_lookup_table[]; extern char *numa_memory_lookup_table; extern cpumask_t numa_cpumask_lookup_table[]; extern int nr_cpus_in_node[]; +#ifdef CONFIG_MEMORY_HOTPLUG +extern unsigned long max_pfn; +#endif /* 16MB regions */ #define MEMORY_INCREMENT_SHIFT 24 @@ -45,6 +48,11 @@ static inline int pa_to_nid(unsigned long pa) { int nid; +#ifdef CONFIG_MEMORY_HOTPLUG + /* kludge hot added sections default to node 0 */ + if (pa >= (max_pfn << PAGE_SHIFT)) + return 0; +#endif nid = numa_memory_lookup_table[pa >> MEMORY_INCREMENT_SHIFT]; #ifdef DEBUG_NUMA -- cgit v1.2.3 From fca5dcd4835ed09bb1a48a355344aff7a25c76e0 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 8 Nov 2005 22:55:08 +1100 Subject: powerpc: Simplify and clean up the xmon terminal I/O This factors out the common bits of arch/powerpc/xmon/start_*.c into a new nonstdio.c, and removes some stuff that was supposed to make xmon's I/O routines somewhat stdio-like but was never used. It also makes the parsing of the xmon= command line option common, so that ppc32 can now use xmon={off,on,early} also. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup-common.c | 21 +++ arch/powerpc/kernel/setup_32.c | 11 +- arch/powerpc/kernel/setup_64.c | 20 --- arch/powerpc/xmon/Makefile | 2 +- arch/powerpc/xmon/nonstdio.c | 134 +++++++++++++++++++ arch/powerpc/xmon/nonstdio.h | 28 ++-- arch/powerpc/xmon/start_32.c | 235 ++++------------------------------ arch/powerpc/xmon/start_64.c | 167 +----------------------- arch/powerpc/xmon/start_8xx.c | 255 +------------------------------------ arch/powerpc/xmon/subr_prf.c | 54 -------- arch/powerpc/xmon/xmon.c | 37 ++++-- include/asm-powerpc/xmon.h | 1 - 12 files changed, 236 insertions(+), 729 deletions(-) create mode 100644 arch/powerpc/xmon/nonstdio.c delete mode 100644 arch/powerpc/xmon/subr_prf.c (limited to 'include') diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index e22856ecb5a0..26bb1fe6384b 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -51,6 +51,7 @@ #include #include #include +#include #undef DEBUG @@ -559,3 +560,23 @@ void __init smp_setup_cpu_maps(void) #endif /* CONFIG_PPC64 */ } #endif /* CONFIG_SMP */ + +#ifdef CONFIG_XMON +static int __init early_xmon(char *p) +{ + /* ensure xmon is enabled */ + if (p) { + if (strncmp(p, "on", 2) == 0) + xmon_init(1); + if (strncmp(p, "off", 3) == 0) + xmon_init(0); + if (strncmp(p, "early", 5) != 0) + return 0; + } + xmon_init(1); + debugger(NULL); + + return 0; +} +early_param("xmon", early_xmon); +#endif diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 3af2631e3fab..0fbc73f7f828 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -303,14 +303,9 @@ void __init setup_arch(char **cmdline_p) pmac_feature_init(); /* New cool way */ #endif -#ifdef CONFIG_XMON - xmon_map_scc(); - if (strstr(cmd_line, "xmon")) { - xmon_init(1); - debugger(NULL); - } -#endif /* CONFIG_XMON */ - if ( ppc_md.progress ) ppc_md.progress("setup_arch: enter", 0x3eab); +#ifdef CONFIG_XMON_DEFAULT + xmon_init(1); +#endif #if defined(CONFIG_KGDB) if (ppc_md.kgdb_map_scc) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 0471e843b6c5..54c606f680b3 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -858,26 +858,6 @@ int check_legacy_ioport(unsigned long base_port) } EXPORT_SYMBOL(check_legacy_ioport); -#ifdef CONFIG_XMON -static int __init early_xmon(char *p) -{ - /* ensure xmon is enabled */ - if (p) { - if (strncmp(p, "on", 2) == 0) - xmon_init(1); - if (strncmp(p, "off", 3) == 0) - xmon_init(0); - if (strncmp(p, "early", 5) != 0) - return 0; - } - xmon_init(1); - debugger(NULL); - - return 0; -} -early_param("xmon", early_xmon); -#endif - void cpu_die(void) { if (ppc_md.cpu_die) diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index 79a784f0e7a9..b20312e5ed27 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -8,4 +8,4 @@ obj-$(CONFIG_8xx) += start_8xx.o obj-$(CONFIG_6xx) += start_32.o obj-$(CONFIG_4xx) += start_32.o obj-$(CONFIG_PPC64) += start_64.o -obj-y += xmon.o ppc-dis.o ppc-opc.o subr_prf.o setjmp.o +obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o nonstdio.o diff --git a/arch/powerpc/xmon/nonstdio.c b/arch/powerpc/xmon/nonstdio.c new file mode 100644 index 000000000000..78765833f4c0 --- /dev/null +++ b/arch/powerpc/xmon/nonstdio.c @@ -0,0 +1,134 @@ +/* + * Copyright (C) 1996-2005 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include "nonstdio.h" + +int xmon_putchar(int c) +{ + char ch = c; + + if (c == '\n') + xmon_putchar('\r'); + return xmon_write(&ch, 1) == 1? c: -1; +} + +static char line[256]; +static char *lineptr; +static int lineleft; + +int xmon_expect(const char *str, unsigned long timeout) +{ + int c; + unsigned long t0; + + /* assume 25MHz default timebase if tb_ticks_per_sec not set yet */ + timeout *= tb_ticks_per_sec? tb_ticks_per_sec: 25000000; + t0 = get_tbl(); + do { + lineptr = line; + for (;;) { + c = xmon_read_poll(); + if (c == -1) { + if (get_tbl() - t0 > timeout) + return 0; + continue; + } + if (c == '\n') + break; + if (c != '\r' && lineptr < &line[sizeof(line) - 1]) + *lineptr++ = c; + } + *lineptr = 0; + } while (strstr(line, str) == NULL); + return 1; +} + +int xmon_getchar(void) +{ + int c; + + if (lineleft == 0) { + lineptr = line; + for (;;) { + c = xmon_readchar(); + if (c == -1 || c == 4) + break; + if (c == '\r' || c == '\n') { + *lineptr++ = '\n'; + xmon_putchar('\n'); + break; + } + switch (c) { + case 0177: + case '\b': + if (lineptr > line) { + xmon_putchar('\b'); + xmon_putchar(' '); + xmon_putchar('\b'); + --lineptr; + } + break; + case 'U' & 0x1F: + while (lineptr > line) { + xmon_putchar('\b'); + xmon_putchar(' '); + xmon_putchar('\b'); + --lineptr; + } + break; + default: + if (lineptr >= &line[sizeof(line) - 1]) + xmon_putchar('\a'); + else { + xmon_putchar(c); + *lineptr++ = c; + } + } + } + lineleft = lineptr - line; + lineptr = line; + } + if (lineleft == 0) + return -1; + --lineleft; + return *lineptr++; +} + +char *xmon_gets(char *str, int nb) +{ + char *p; + int c; + + for (p = str; p < str + nb - 1; ) { + c = xmon_getchar(); + if (c == -1) { + if (p == str) + return NULL; + break; + } + *p++ = c; + if (c == '\n') + break; + } + *p = 0; + return str; +} + +void xmon_printf(const char *format, ...) +{ + va_list args; + int n; + static char xmon_outbuf[1024]; + + va_start(args, format); + n = vsnprintf(xmon_outbuf, sizeof(xmon_outbuf), format, args); + va_end(args); + xmon_write(xmon_outbuf, n); +} diff --git a/arch/powerpc/xmon/nonstdio.h b/arch/powerpc/xmon/nonstdio.h index 84211a21c6f4..47cebbd2b1b1 100644 --- a/arch/powerpc/xmon/nonstdio.h +++ b/arch/powerpc/xmon/nonstdio.h @@ -1,22 +1,14 @@ -typedef int FILE; -extern FILE *xmon_stdin, *xmon_stdout; #define EOF (-1) -#define stdin xmon_stdin -#define stdout xmon_stdout + #define printf xmon_printf -#define fprintf xmon_fprintf -#define fputs xmon_fputs -#define fgets xmon_fgets #define putchar xmon_putchar -#define getchar xmon_getchar -#define putc xmon_putc -#define getc xmon_getc -#define fopen(n, m) NULL -#define fflush(f) do {} while (0) -#define fclose(f) do {} while (0) -extern char *fgets(char *, int, void *); -extern void xmon_printf(const char *, ...); -extern void xmon_fprintf(void *, const char *, ...); -extern void xmon_sprintf(char *, const char *, ...); -#define perror(s) printf("%s: no files!\n", (s)) +extern int xmon_putchar(int c); +extern int xmon_getchar(void); +extern char *xmon_gets(char *, int); +extern void xmon_printf(const char *, ...); +extern void xmon_map_scc(void); +extern int xmon_expect(const char *str, unsigned long timeout); +extern int xmon_write(void *ptr, int nb); +extern int xmon_readchar(void); +extern int xmon_read_poll(void); diff --git a/arch/powerpc/xmon/start_32.c b/arch/powerpc/xmon/start_32.c index 69b658c0f760..c2464df4217e 100644 --- a/arch/powerpc/xmon/start_32.c +++ b/arch/powerpc/xmon/start_32.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -22,10 +21,11 @@ #include #include #include +#include +#include "nonstdio.h" static volatile unsigned char __iomem *sccc, *sccd; unsigned int TXRDY, RXRDY, DLAB; -static int xmon_expect(const char *str, unsigned int timeout); static int use_serial; static int use_screen; @@ -33,16 +33,6 @@ static int via_modem; static int xmon_use_sccb; static struct device_node *channel_node; -#define TB_SPEED 25000000 - -static inline unsigned int readtb(void) -{ - unsigned int ret; - - asm volatile("mftb %0" : "=r" (ret) :); - return ret; -} - void buf_access(void) { if (DLAB) @@ -91,23 +81,7 @@ static unsigned long chrp_find_phys_io_base(void) } #endif /* CONFIG_PPC_CHRP */ -#ifdef CONFIG_MAGIC_SYSRQ -static void sysrq_handle_xmon(int key, struct pt_regs *regs, - struct tty_struct *tty) -{ - xmon(regs); -} - -static struct sysrq_key_op sysrq_xmon_op = -{ - .handler = sysrq_handle_xmon, - .help_msg = "Xmon", - .action_msg = "Entering xmon", -}; -#endif - -void -xmon_map_scc(void) +void xmon_map_scc(void) { #ifdef CONFIG_PPC_MULTIPLATFORM volatile unsigned char __iomem *base; @@ -217,8 +191,6 @@ xmon_map_scc(void) RXRDY = 1; DLAB = 0x80; #endif /* platform */ - - register_sysrq_key('x', &sysrq_xmon_op); } static int scc_initialized = 0; @@ -238,8 +210,7 @@ static inline void do_poll_adb(void) #endif /* CONFIG_ADB_CUDA */ } -int -xmon_write(void *handle, void *ptr, int nb) +int xmon_write(void *ptr, int nb) { char *p = ptr; int i, c, ct; @@ -311,8 +282,7 @@ static unsigned char xmon_shift_keytab[128] = "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ -static int -xmon_get_adb_key(void) +static int xmon_get_adb_key(void) { int k, t, on; @@ -350,32 +320,21 @@ xmon_get_adb_key(void) } #endif /* CONFIG_BOOTX_TEXT */ -int -xmon_read(void *handle, void *ptr, int nb) +int xmon_readchar(void) { - char *p = ptr; - int i; - #ifdef CONFIG_BOOTX_TEXT - if (use_screen) { - for (i = 0; i < nb; ++i) - *p++ = xmon_get_adb_key(); - return i; - } + if (use_screen) + return xmon_get_adb_key(); #endif - if (!scc_initialized) - xmon_init_scc(); - for (i = 0; i < nb; ++i) { + if (!scc_initialized) + xmon_init_scc(); while ((*sccc & RXRDY) == 0) - do_poll_adb(); + do_poll_adb(); buf_access(); - *p++ = *sccd; - } - return i; + return *sccd; } -int -xmon_read_poll(void) +int xmon_read_poll(void) { if ((*sccc & RXRDY) == 0) { do_poll_adb(); @@ -395,8 +354,7 @@ static unsigned char scc_inittab[] = { 3, 0xc1, /* rx enable, 8 bits */ }; -void -xmon_init_scc(void) +void xmon_init_scc(void) { if ( _machine == _MACH_chrp ) { @@ -410,6 +368,7 @@ xmon_init_scc(void) else if ( _machine == _MACH_Pmac ) { int i, x; + unsigned long timeout; if (channel_node != 0) pmac_call_feature( @@ -424,8 +383,12 @@ xmon_init_scc(void) PMAC_FTR_MODEM_ENABLE, channel_node, 0, 1); printk(KERN_INFO "Modem powered up by debugger !\n"); - t0 = readtb(); - while (readtb() - t0 < 3*TB_SPEED) + t0 = get_tbl(); + timeout = 3 * tb_ticks_per_sec; + if (timeout == 0) + /* assume 25MHz if tb_ticks_per_sec not set */ + timeout = 75000000; + while (get_tbl() - t0 < timeout) eieio(); } /* use the B channel if requested */ @@ -447,164 +410,19 @@ xmon_init_scc(void) scc_initialized = 1; if (via_modem) { for (;;) { - xmon_write(NULL, "ATE1V1\r", 7); + xmon_write("ATE1V1\r", 7); if (xmon_expect("OK", 5)) { - xmon_write(NULL, "ATA\r", 4); + xmon_write("ATA\r", 4); if (xmon_expect("CONNECT", 40)) break; } - xmon_write(NULL, "+++", 3); + xmon_write("+++", 3); xmon_expect("OK", 3); } } } -void *xmon_stdin; -void *xmon_stdout; -void *xmon_stderr; - -int xmon_putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - xmon_putc('\r', f); - return xmon_write(f, &ch, 1) == 1? c: -1; -} - -int xmon_putchar(int c) -{ - return xmon_putc(c, xmon_stdout); -} - -int xmon_fputs(char *str, void *f) -{ - int n = strlen(str); - - return xmon_write(f, str, n) == n? 0: -1; -} - -int -xmon_readchar(void) -{ - char ch; - - for (;;) { - switch (xmon_read(xmon_stdin, &ch, 1)) { - case 1: - return ch; - case -1: - xmon_printf("read(stdin) returned -1\r\n", 0, 0); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int xmon_expect(const char *str, unsigned int timeout) -{ - int c; - unsigned int t0; - - timeout *= TB_SPEED; - t0 = readtb(); - do { - lineptr = line; - for (;;) { - c = xmon_read_poll(); - if (c == -1) { - if (readtb() - t0 > timeout) - return 0; - continue; - } - if (c == '\n') - break; - if (c != '\r' && lineptr < &line[sizeof(line) - 1]) - *lineptr++ = c; - } - *lineptr = 0; - } while (strstr(line, str) == NULL); - return 1; -} - -int -xmon_getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = xmon_readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - xmon_putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - xmon_putchar('\a'); - else { - xmon_putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -char * -xmon_fgets(char *str, int nb, void *f) -{ - char *p; - int c; - - for (p = str; p < str + nb - 1; ) { - c = xmon_getchar(); - if (c == -1) { - if (p == str) - return NULL; - break; - } - *p++ = c; - if (c == '\n') - break; - } - *p = 0; - return str; -} - -void -xmon_enter(void) +void xmon_enter(void) { #ifdef CONFIG_ADB_PMU if (_machine == _MACH_Pmac) { @@ -613,8 +431,7 @@ xmon_enter(void) #endif } -void -xmon_leave(void) +void xmon_leave(void) { #ifdef CONFIG_ADB_PMU if (_machine == _MACH_Pmac) { diff --git a/arch/powerpc/xmon/start_64.c b/arch/powerpc/xmon/start_64.c index e50c158191e1..712552c4f242 100644 --- a/arch/powerpc/xmon/start_64.c +++ b/arch/powerpc/xmon/start_64.c @@ -6,182 +6,29 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#include -#include -#include -#include -#include -#include #include -#include -#include -#include -#include #include -#include #include "nonstdio.h" -#ifdef CONFIG_MAGIC_SYSRQ - -static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs, - struct tty_struct *tty) -{ - /* ensure xmon is enabled */ - xmon_init(1); - debugger(pt_regs); -} - -static struct sysrq_key_op sysrq_xmon_op = +void xmon_map_scc(void) { - .handler = sysrq_handle_xmon, - .help_msg = "Xmon", - .action_msg = "Entering xmon", -}; - -static int __init setup_xmon_sysrq(void) -{ - register_sysrq_key('x', &sysrq_xmon_op); - return 0; } -__initcall(setup_xmon_sysrq); -#endif /* CONFIG_MAGIC_SYSRQ */ -int -xmon_write(void *handle, void *ptr, int nb) +int xmon_write(void *ptr, int nb) { return udbg_write(ptr, nb); } -int -xmon_read(void *handle, void *ptr, int nb) +int xmon_readchar(void) { - return udbg_read(ptr, nb); + if (udbg_getc) + return udbg_getc(); + return -1; } -int -xmon_read_poll(void) +int xmon_read_poll(void) { if (udbg_getc_poll) return udbg_getc_poll(); return -1; } - -FILE *xmon_stdin; -FILE *xmon_stdout; - -int -xmon_putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - xmon_putc('\r', f); - return xmon_write(f, &ch, 1) == 1? c: -1; -} - -int -xmon_putchar(int c) -{ - return xmon_putc(c, xmon_stdout); -} - -int -xmon_fputs(char *str, void *f) -{ - int n = strlen(str); - - return xmon_write(f, str, n) == n? 0: -1; -} - -int -xmon_readchar(void) -{ - char ch; - - for (;;) { - switch (xmon_read(xmon_stdin, &ch, 1)) { - case 1: - return ch; - case -1: - xmon_printf("read(stdin) returned -1\r\n", 0, 0); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int -xmon_getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = xmon_readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - xmon_putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - xmon_putchar('\a'); - else { - xmon_putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -char * -xmon_fgets(char *str, int nb, void *f) -{ - char *p; - int c; - - for (p = str; p < str + nb - 1; ) { - c = xmon_getchar(); - if (c == -1) { - if (p == str) - return NULL; - break; - } - *p++ = c; - if (c == '\n') - break; - } - *p = 0; - return str; -} diff --git a/arch/powerpc/xmon/start_8xx.c b/arch/powerpc/xmon/start_8xx.c index a48bd594cf61..4c17b0486ad5 100644 --- a/arch/powerpc/xmon/start_8xx.c +++ b/arch/powerpc/xmon/start_8xx.c @@ -15,273 +15,30 @@ #include #include #include +#include "nonstdio.h" -extern void xmon_printf(const char *fmt, ...); extern int xmon_8xx_write(char *str, int nb); extern int xmon_8xx_read_poll(void); extern int xmon_8xx_read_char(void); -void prom_drawhex(uint); -void prom_drawstring(const char *str); -static int use_screen = 1; /* default */ - -#define TB_SPEED 25000000 - -static inline unsigned int readtb(void) -{ - unsigned int ret; - - asm volatile("mftb %0" : "=r" (ret) :); - return ret; -} - -void buf_access(void) -{ -} - -void -xmon_map_scc(void) +void xmon_map_scc(void) { - cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); - use_screen = 0; - - prom_drawstring("xmon uses serial port\n"); } -static int scc_initialized = 0; - void xmon_init_scc(void); -int -xmon_write(void *handle, void *ptr, int nb) +int xmon_write(void *ptr, int nb) { - char *p = ptr; - int i, c, ct; - - if (!scc_initialized) - xmon_init_scc(); - return(xmon_8xx_write(ptr, nb)); } -int xmon_wants_key; - -int -xmon_read(void *handle, void *ptr, int nb) +int xmon_readchar(void) { - char *p = ptr; - int i; - - if (!scc_initialized) - xmon_init_scc(); - - for (i = 0; i < nb; ++i) { - *p++ = xmon_8xx_read_char(); - } - return i; + return xmon_8xx_read_char(); } -int -xmon_read_poll(void) +int xmon_read_poll(void) { return(xmon_8xx_read_poll()); } - -void -xmon_init_scc() -{ - scc_initialized = 1; -} - -#if 0 -extern int (*prom_entry)(void *); - -int -xmon_exit(void) -{ - struct prom_args { - char *service; - } args; - - for (;;) { - args.service = "exit"; - (*prom_entry)(&args); - } -} -#endif - -void *xmon_stdin; -void *xmon_stdout; -void *xmon_stderr; - -void -xmon_init(void) -{ -} - -int -xmon_putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - xmon_putc('\r', f); - return xmon_write(f, &ch, 1) == 1? c: -1; -} - -int -xmon_putchar(int c) -{ - return xmon_putc(c, xmon_stdout); -} - -int -xmon_fputs(char *str, void *f) -{ - int n = strlen(str); - - return xmon_write(f, str, n) == n? 0: -1; -} - -int -xmon_readchar(void) -{ - char ch; - - for (;;) { - switch (xmon_read(xmon_stdin, &ch, 1)) { - case 1: - return ch; - case -1: - xmon_printf("read(stdin) returned -1\r\n", 0, 0); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -#if 0 -int xmon_expect(const char *str, unsigned int timeout) -{ - int c; - unsigned int t0; - - timeout *= TB_SPEED; - t0 = readtb(); - do { - lineptr = line; - for (;;) { - c = xmon_read_poll(); - if (c == -1) { - if (readtb() - t0 > timeout) - return 0; - continue; - } - if (c == '\n') - break; - if (c != '\r' && lineptr < &line[sizeof(line) - 1]) - *lineptr++ = c; - } - *lineptr = 0; - } while (strstr(line, str) == NULL); - return 1; -} -#endif - -int -xmon_getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = xmon_readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - xmon_putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - xmon_putchar('\a'); - else { - xmon_putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -char * -xmon_fgets(char *str, int nb, void *f) -{ - char *p; - int c; - - for (p = str; p < str + nb - 1; ) { - c = xmon_getchar(); - if (c == -1) { - if (p == str) - return 0; - break; - } - *p++ = c; - if (c == '\n') - break; - } - *p = 0; - return str; -} - -void -prom_drawhex(uint val) -{ - unsigned char buf[10]; - - int i; - for (i = 7; i >= 0; i--) - { - buf[i] = "0123456789abcdef"[val & 0x0f]; - val >>= 4; - } - buf[8] = '\0'; - xmon_fputs(buf, xmon_stdout); -} - -void -prom_drawstring(const char *str) -{ - xmon_fputs(str, xmon_stdout); -} diff --git a/arch/powerpc/xmon/subr_prf.c b/arch/powerpc/xmon/subr_prf.c deleted file mode 100644 index b48738c6dd33..000000000000 --- a/arch/powerpc/xmon/subr_prf.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Written by Cort Dougan to replace the version originally used - * by Paul Mackerras, which came from NetBSD and thus had copyright - * conflicts with Linux. - * - * This file makes liberal use of the standard linux utility - * routines to reduce the size of the binary. We assume we can - * trust some parts of Linux inside the debugger. - * -- Cort (cort@cs.nmt.edu) - * - * Copyright (C) 1999 Cort Dougan. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include "nonstdio.h" - -extern int xmon_write(void *, void *, int); - -void xmon_vfprintf(void *f, const char *fmt, va_list ap) -{ - static char xmon_buf[2048]; - int n; - - n = vsprintf(xmon_buf, fmt, ap); - xmon_write(f, xmon_buf, n); -} - -void xmon_printf(const char *fmt, ...) -{ - va_list ap; - - va_start(ap, fmt); - xmon_vfprintf(stdout, fmt, ap); - va_end(ap); -} -EXPORT_SYMBOL(xmon_printf); - -void xmon_fprintf(void *f, const char *fmt, ...) -{ - va_list ap; - - va_start(ap, fmt); - xmon_vfprintf(f, fmt, ap); - va_end(ap); -} - diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 1124f1146202..b43a57425ea9 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -1,7 +1,7 @@ /* * Routines providing a simple monitor for use on the PowerMac. * - * Copyright (C) 1996 Paul Mackerras. + * Copyright (C) 1996-2005 Paul Mackerras. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -144,15 +145,10 @@ static void xmon_print_symbol(unsigned long address, const char *mid, static const char *getvecname(unsigned long vec); extern int print_insn_powerpc(unsigned long, unsigned long, int); -extern void printf(const char *fmt, ...); -extern void xmon_vfprintf(void *f, const char *fmt, va_list ap); -extern int xmon_putc(int c, void *f); -extern int putchar(int ch); extern void xmon_enter(void); extern void xmon_leave(void); -extern int xmon_read_poll(void); extern long setjmp(long *); extern void longjmp(long *, long); extern void xmon_save_regs(struct pt_regs *); @@ -748,7 +744,6 @@ cmds(struct pt_regs *excp) printf("%x:", smp_processor_id()); #endif /* CONFIG_SMP */ printf("mon> "); - fflush(stdout); flush_input(); termch = 0; cmd = skipbl(); @@ -2151,7 +2146,6 @@ memzcan(void) ok = mread(a, &v, 1); if (ok && !ook) { printf("%.8x .. ", a); - fflush(stdout); } else if (!ok && ook) printf("%.8x\n", a - mskip); ook = ok; @@ -2372,7 +2366,7 @@ int inchar(void) { if (lineptr == NULL || *lineptr == 0) { - if (fgets(line, sizeof(line), stdin) == NULL) { + if (xmon_gets(line, sizeof(line)) == NULL) { lineptr = NULL; return EOF; } @@ -2526,4 +2520,29 @@ void xmon_init(int enable) __debugger_dabr_match = NULL; __debugger_fault_handler = NULL; } + xmon_map_scc(); } + +#ifdef CONFIG_MAGIC_SYSRQ +static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs, + struct tty_struct *tty) +{ + /* ensure xmon is enabled */ + xmon_init(1); + debugger(pt_regs); +} + +static struct sysrq_key_op sysrq_xmon_op = +{ + .handler = sysrq_handle_xmon, + .help_msg = "Xmon", + .action_msg = "Entering xmon", +}; + +static int __init setup_xmon_sysrq(void) +{ + register_sysrq_key('x', &sysrq_xmon_op); + return 0; +} +__initcall(setup_xmon_sysrq); +#endif /* CONFIG_MAGIC_SYSRQ */ diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h index ace2072d4a83..43f7129984c7 100644 --- a/include/asm-powerpc/xmon.h +++ b/include/asm-powerpc/xmon.h @@ -7,7 +7,6 @@ struct pt_regs; extern int xmon(struct pt_regs *excp); extern void xmon_printf(const char *fmt, ...); extern void xmon_init(int); -extern void xmon_map_scc(void); #endif #endif -- cgit v1.2.3 From b709c0832824da20a32a3119911b9f0cf6970452 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 9 Nov 2005 13:28:33 +1100 Subject: ppc64: move stack switching up in interrupt processing This will make the ppc64 multiplatform irq handling more like the generic handling. Signed-off-by: Stephen Rothwell --- arch/powerpc/kernel/misc_64.S | 8 ++++---- arch/ppc64/kernel/irq.c | 40 ++++++++++++++++++++-------------------- arch/ppc64/kernel/misc.S | 8 ++++---- include/asm-powerpc/irq.h | 4 ++-- 4 files changed, 30 insertions(+), 30 deletions(-) (limited to 'include') diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index ae1433da09b2..9d09f0ad6efe 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -89,12 +89,12 @@ _GLOBAL(call_do_softirq) mtlr r0 blr -_GLOBAL(call_handle_IRQ_event) +_GLOBAL(call_ppc_irq_dispatch_handler) mflr r0 std r0,16(r1) - stdu r1,THREAD_SIZE-112(r6) - mr r1,r6 - bl .handle_IRQ_event + stdu r1,THREAD_SIZE-112(r5) + mr r1,r5 + bl .ppc_irq_dispatch_handler ld r1,0(r1) ld r0,16(r1) mtlr r0 diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c index 87474584033f..b61497d5be28 100644 --- a/arch/ppc64/kernel/irq.c +++ b/arch/ppc64/kernel/irq.c @@ -157,9 +157,6 @@ void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq) int cpu = smp_processor_id(); irq_desc_t *desc = get_irq_desc(irq); irqreturn_t action_ret; -#ifdef CONFIG_IRQSTACKS - struct thread_info *curtp, *irqtp; -#endif kstat_cpu(cpu).irqs[irq]++; @@ -227,20 +224,7 @@ void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq) for (;;) { spin_unlock(&desc->lock); -#ifdef CONFIG_IRQSTACKS - /* Switch to the irq stack to handle this */ - curtp = current_thread_info(); - irqtp = hardirq_ctx[smp_processor_id()]; - if (curtp != irqtp) { - irqtp->task = curtp->task; - irqtp->flags = 0; - action_ret = call_handle_IRQ_event(irq, regs, action, irqtp); - irqtp->task = NULL; - if (irqtp->flags) - set_bits(irqtp->flags, &curtp->flags); - } else -#endif - action_ret = handle_IRQ_event(irq, regs, action); + action_ret = handle_IRQ_event(irq, regs, action); spin_lock(&desc->lock); if (!noirqdebug) @@ -310,6 +294,9 @@ void do_IRQ(struct pt_regs *regs) void do_IRQ(struct pt_regs *regs) { int irq; +#ifdef CONFIG_IRQSTACKS + struct thread_info *curtp, *irqtp; +#endif irq_enter(); @@ -330,9 +317,22 @@ void do_IRQ(struct pt_regs *regs) irq = ppc_md.get_irq(regs); - if (irq >= 0) - ppc_irq_dispatch_handler(regs, irq); - else + if (irq >= 0) { +#ifdef CONFIG_IRQSTACKS + /* Switch to the irq stack to handle this */ + curtp = current_thread_info(); + irqtp = hardirq_ctx[smp_processor_id()]; + if (curtp != irqtp) { + irqtp->task = curtp->task; + irqtp->flags = 0; + call_ppc_irq_dispatch_handler(regs, irq, irqtp); + irqtp->task = NULL; + if (irqtp->flags) + set_bits(irqtp->flags, &curtp->flags); + } else +#endif + ppc_irq_dispatch_handler(regs, irq); + } else /* That's not SMP safe ... but who cares ? */ ppc_spurious_interrupts++; diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index 914632ec587d..d82a30dc26f8 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -78,12 +78,12 @@ _GLOBAL(call_do_softirq) mtlr r0 blr -_GLOBAL(call_handle_IRQ_event) +_GLOBAL(call_ppc_irq_dispatch_handler) mflr r0 std r0,16(r1) - stdu r1,THREAD_SIZE-112(r6) - mr r1,r6 - bl .handle_IRQ_event + stdu r1,THREAD_SIZE-112(r5) + mr r1,r5 + bl .ppc_irq_dispatch_handler ld r1,0(r1) ld r0,16(r1) mtlr r0 diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h index b3935ea28fff..2a768e096067 100644 --- a/include/asm-powerpc/irq.h +++ b/include/asm-powerpc/irq.h @@ -488,8 +488,8 @@ extern struct thread_info *softirq_ctx[NR_CPUS]; extern void irq_ctx_init(void); extern void call_do_softirq(struct thread_info *tp); -extern int call_handle_IRQ_event(int irq, struct pt_regs *regs, - struct irqaction *action, struct thread_info *tp); +extern int call_ppc_irq_dispatch_handler(struct pt_regs *regs, int irq, + struct thread_info *tp); #define __ARCH_HAS_DO_SOFTIRQ -- cgit v1.2.3 From d4be4f37d9d2a5afc8e79a95beafbac4b83f20c5 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 9 Nov 2005 16:19:53 +1100 Subject: ppc64: remove ppc_irq_dispatch_handler Use __do_IRQ instead. The only difference is that every controller is now assumed to have an end() routine (only xics_8259 did not). Signed-off-by: Stephen Rothwell --- arch/powerpc/kernel/misc_64.S | 4 +- arch/powerpc/platforms/iseries/irq.c | 10 ++-- arch/powerpc/platforms/pseries/xics.c | 1 + arch/ppc64/kernel/irq.c | 108 +--------------------------------- arch/ppc64/kernel/misc.S | 4 +- include/asm-powerpc/hw_irq.h | 1 - include/asm-powerpc/irq.h | 2 +- 7 files changed, 12 insertions(+), 118 deletions(-) (limited to 'include') diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 9d09f0ad6efe..ae48a002f81a 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -89,12 +89,12 @@ _GLOBAL(call_do_softirq) mtlr r0 blr -_GLOBAL(call_ppc_irq_dispatch_handler) +_GLOBAL(call___do_IRQ) mflr r0 std r0,16(r1) stdu r1,THREAD_SIZE-112(r5) mr r1,r5 - bl .ppc_irq_dispatch_handler + bl .__do_IRQ ld r1,0(r1) ld r0,16(r1) mtlr r0 diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index a0ff7d95fdf3..01090e9ce0cf 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -120,13 +120,13 @@ static void intReceived(struct XmPciLpEvent *eventParm, if (curtp != irqtp) { irqtp->task = curtp->task; irqtp->flags = 0; - call_ppc_irq_dispatch_handler(regsParm, irq, irqtp); + call___do_IRQ(irq, regsParm, irqtp); irqtp->task = NULL; if (irqtp->flags) set_bits(irqtp->flags, &curtp->flags); } else #endif - ppc_irq_dispatch_handler(regsParm, irq); + __do_IRQ(irq, regsParm); HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber, eventParm->eventData.slotInterrupt.subBusNumber, eventParm->eventData.slotInterrupt.deviceId); @@ -326,10 +326,8 @@ static void iSeries_disable_IRQ(unsigned int irq) } /* - * Need to define this so ppc_irq_dispatch_handler will NOT call - * enable_IRQ at the end of interrupt handling. However, this does - * nothing because there is not enough information provided to do - * the EOI HvCall. This is done by XmPciLpEvent.c + * This does nothing because there is not enough information + * provided to do the EOI HvCall. This is done by XmPciLpEvent.c */ static void iSeries_end_IRQ(unsigned int irq) { diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index c72c86f05cb6..405c4f3229b3 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -567,6 +567,7 @@ nextnode: xics_8259_pic.enable = i8259_pic.enable; xics_8259_pic.disable = i8259_pic.disable; + xics_8259_pic.end = i8259_pic.end; for (i = 0; i < 16; ++i) get_irq_desc(i)->handler = &xics_8259_pic; for (; i < NR_IRQS; ++i) diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c index b61497d5be28..bd6a95a5914d 100644 --- a/arch/ppc64/kernel/irq.c +++ b/arch/ppc64/kernel/irq.c @@ -144,110 +144,6 @@ void fixup_irqs(cpumask_t map) } #endif -extern int noirqdebug; - -/* - * Eventually, this should take an array of interrupts and an array size - * so it can dispatch multiple interrupts. - */ -void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq) -{ - int status; - struct irqaction *action; - int cpu = smp_processor_id(); - irq_desc_t *desc = get_irq_desc(irq); - irqreturn_t action_ret; - - kstat_cpu(cpu).irqs[irq]++; - - if (desc->status & IRQ_PER_CPU) { - /* no locking required for CPU-local interrupts: */ - ack_irq(irq); - action_ret = handle_IRQ_event(irq, regs, desc->action); - desc->handler->end(irq); - return; - } - - spin_lock(&desc->lock); - ack_irq(irq); - /* - REPLAY is when Linux resends an IRQ that was dropped earlier - WAITING is used by probe to mark irqs that are being tested - */ - status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING); - status |= IRQ_PENDING; /* we _want_ to handle it */ - - /* - * If the IRQ is disabled for whatever reason, we cannot - * use the action we have. - */ - action = NULL; - if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) { - action = desc->action; - if (!action || !action->handler) { - ppc_spurious_interrupts++; - printk(KERN_DEBUG "Unhandled interrupt %x, disabled\n", irq); - /* We can't call disable_irq here, it would deadlock */ - if (!desc->depth) - desc->depth = 1; - desc->status |= IRQ_DISABLED; - /* This is not a real spurrious interrupt, we - * have to eoi it, so we jump to out - */ - mask_irq(irq); - goto out; - } - status &= ~IRQ_PENDING; /* we commit to handling */ - status |= IRQ_INPROGRESS; /* we are handling it */ - } - desc->status = status; - - /* - * If there is no IRQ handler or it was disabled, exit early. - Since we set PENDING, if another processor is handling - a different instance of this same irq, the other processor - will take care of it. - */ - if (unlikely(!action)) - goto out; - - /* - * Edge triggered interrupts need to remember - * pending events. - * This applies to any hw interrupts that allow a second - * instance of the same irq to arrive while we are in do_IRQ - * or in the handler. But the code here only handles the _second_ - * instance of the irq, not the third or fourth. So it is mostly - * useful for irq hardware that does not mask cleanly in an - * SMP environment. - */ - for (;;) { - spin_unlock(&desc->lock); - - action_ret = handle_IRQ_event(irq, regs, action); - - spin_lock(&desc->lock); - if (!noirqdebug) - note_interrupt(irq, desc, action_ret, regs); - if (likely(!(desc->status & IRQ_PENDING))) - break; - desc->status &= ~IRQ_PENDING; - } -out: - desc->status &= ~IRQ_INPROGRESS; - /* - * The ->end() handler has to deal with interrupts which got - * disabled while the handler was running. - */ - if (desc->handler) { - if (desc->handler->end) - desc->handler->end(irq); - else if (desc->handler->enable) - desc->handler->enable(irq); - } - spin_unlock(&desc->lock); -} - #ifdef CONFIG_PPC_ISERIES void do_IRQ(struct pt_regs *regs) { @@ -325,13 +221,13 @@ void do_IRQ(struct pt_regs *regs) if (curtp != irqtp) { irqtp->task = curtp->task; irqtp->flags = 0; - call_ppc_irq_dispatch_handler(regs, irq, irqtp); + call___do_IRQ(irq, regs, irqtp); irqtp->task = NULL; if (irqtp->flags) set_bits(irqtp->flags, &curtp->flags); } else #endif - ppc_irq_dispatch_handler(regs, irq); + __do_IRQ(irq, regs); } else /* That's not SMP safe ... but who cares ? */ ppc_spurious_interrupts++; diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index d82a30dc26f8..492bca6137eb 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -78,12 +78,12 @@ _GLOBAL(call_do_softirq) mtlr r0 blr -_GLOBAL(call_ppc_irq_dispatch_handler) +_GLOBAL(call___do_IRQ) mflr r0 std r0,16(r1) stdu r1,THREAD_SIZE-112(r5) mr r1,r5 - bl .ppc_irq_dispatch_handler + bl .__do_IRQ ld r1,0(r1) ld r0,16(r1) mtlr r0 diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h index c37b31b96337..26b89d859c56 100644 --- a/include/asm-powerpc/hw_irq.h +++ b/include/asm-powerpc/hw_irq.h @@ -12,7 +12,6 @@ #include extern void timer_interrupt(struct pt_regs *); -extern void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq); #ifdef CONFIG_PPC_ISERIES diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h index 2a768e096067..225dc182ef3b 100644 --- a/include/asm-powerpc/irq.h +++ b/include/asm-powerpc/irq.h @@ -488,7 +488,7 @@ extern struct thread_info *softirq_ctx[NR_CPUS]; extern void irq_ctx_init(void); extern void call_do_softirq(struct thread_info *tp); -extern int call_ppc_irq_dispatch_handler(struct pt_regs *regs, int irq, +extern int call___do_IRQ(int irq, struct pt_regs *regs, struct thread_info *tp); #define __ARCH_HAS_DO_SOFTIRQ -- cgit v1.2.3 From 756e7104fefc82e3ebaa5f1da5ba6659c9c1cae5 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 9 Nov 2005 18:07:45 +1100 Subject: powerpc: merge irq.c Signed-off-by: Stephen Rothwell --- arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/irq.c | 478 ++++++++++++++++++++++++++++++++++ arch/powerpc/platforms/powermac/pic.c | 3 + arch/ppc/kernel/Makefile | 5 +- arch/ppc/kernel/irq.c | 165 ------------ arch/ppc/kernel/ppc_ksyms.c | 1 - arch/ppc/platforms/pmac_pic.c | 3 + arch/ppc64/kernel/Makefile | 2 +- arch/ppc64/kernel/irq.c | 415 ----------------------------- include/asm-powerpc/irq.h | 1 - 10 files changed, 488 insertions(+), 587 deletions(-) create mode 100644 arch/powerpc/kernel/irq.c delete mode 100644 arch/ppc/kernel/irq.c delete mode 100644 arch/ppc64/kernel/irq.c (limited to 'include') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b3ae2993efb8..cbdc14261655 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -11,7 +11,7 @@ CFLAGS_btext.o += -fPIC endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ - signal_32.o pmc.o + irq.o signal_32.o pmc.o obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c new file mode 100644 index 000000000000..4b7940693f3d --- /dev/null +++ b/arch/powerpc/kernel/irq.c @@ -0,0 +1,478 @@ +/* + * arch/ppc/kernel/irq.c + * + * Derived from arch/i386/kernel/irq.c + * Copyright (C) 1992 Linus Torvalds + * Adapted from arch/i386 by Gary Thomas + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * Updated and modified by Cort Dougan + * Copyright (C) 1996-2001 Cort Dougan + * Adapted for Power Macintosh by Paul Mackerras + * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) + * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This file contains the code used by various IRQ handling routines: + * asking for different IRQ's should be done through these routines + * instead of just grabbing them. Thus setups with different IRQ numbers + * shouldn't result in any weird surprises, and installing new handlers + * should be easier. + * + * The MPC8xx has an interrupt mask in the SIU. If a bit is set, the + * interrupt is _enabled_. As expected, IRQ0 is bit 0 in the 32-bit + * mask register (of which only 16 are defined), hence the weird shifting + * and complement of the cached_irq_mask. I want to be able to stuff + * this right into the SIU SMASK register. + * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx + * to reduce code space and undefined function references. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_PPC64 +#include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_PPC64 +#include +#include +#endif + +static int ppc_spurious_interrupts; + +#if defined(CONFIG_PPC_ISERIES) && defined(CONFIG_SMP) +extern void iSeries_smp_message_recv(struct pt_regs *); +#endif + +#ifdef CONFIG_PPC32 +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) + +unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +atomic_t ppc_n_lost_interrupts; + +#ifdef CONFIG_TAU_INT +extern int tau_initialized; +extern int tau_interrupts(int); +#endif + +#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) +extern atomic_t ipi_recv; +extern atomic_t ipi_sent; +#endif +#endif /* CONFIG_PPC32 */ + +#ifdef CONFIG_PPC64 +EXPORT_SYMBOL(irq_desc); + +int distribute_irqs = 1; +int __irq_offset_value; +u64 ppc64_interrupt_controller; +#endif /* CONFIG_PPC64 */ + +int show_interrupts(struct seq_file *p, void *v) +{ + int i = *(loff_t *)v, j; + struct irqaction *action; + irq_desc_t *desc; + unsigned long flags; + + if (i == 0) { + seq_puts(p, " "); + for_each_online_cpu(j) + seq_printf(p, "CPU%d ", j); + seq_putc(p, '\n'); + } + + if (i < NR_IRQS) { + desc = get_irq_desc(i); + spin_lock_irqsave(&desc->lock, flags); + action = desc->action; + if (!action || !action->handler) + goto skip; + seq_printf(p, "%3d: ", i); +#ifdef CONFIG_SMP + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); +#else + seq_printf(p, "%10u ", kstat_irqs(i)); +#endif /* CONFIG_SMP */ + if (desc->handler) + seq_printf(p, " %s ", desc->handler->typename); + else + seq_puts(p, " None "); + seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge "); + seq_printf(p, " %s", action->name); + for (action = action->next; action; action = action->next) + seq_printf(p, ", %s", action->name); + seq_putc(p, '\n'); +skip: + spin_unlock_irqrestore(&desc->lock, flags); + } else if (i == NR_IRQS) { +#ifdef CONFIG_PPC32 +#ifdef CONFIG_TAU_INT + if (tau_initialized){ + seq_puts(p, "TAU: "); + for (j = 0; j < NR_CPUS; j++) + if (cpu_online(j)) + seq_printf(p, "%10u ", tau_interrupts(j)); + seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); + } +#endif +#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) + /* should this be per processor send/receive? */ + seq_printf(p, "IPI (recv/sent): %10u/%u\n", + atomic_read(&ipi_recv), atomic_read(&ipi_sent)); +#endif +#endif /* CONFIG_PPC32 */ + seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); + } + return 0; +} + +#ifdef CONFIG_HOTPLUG_CPU +void fixup_irqs(cpumask_t map) +{ + unsigned int irq; + static int warned; + + for_each_irq(irq) { + cpumask_t mask; + + if (irq_desc[irq].status & IRQ_PER_CPU) + continue; + + cpus_and(mask, irq_affinity[irq], map); + if (any_online_cpu(mask) == NR_CPUS) { + printk("Breaking affinity for irq %i\n", irq); + mask = map; + } + if (irq_desc[irq].handler->set_affinity) + irq_desc[irq].handler->set_affinity(irq, mask); + else if (irq_desc[irq].action && !(warned++)) + printk("Cannot set affinity for irq %i\n", irq); + } + + local_irq_enable(); + mdelay(1); + local_irq_disable(); +} +#endif + +#ifdef CONFIG_PPC_ISERIES +void do_IRQ(struct pt_regs *regs) +{ + struct paca_struct *lpaca; + + irq_enter(); + +#ifdef CONFIG_DEBUG_STACKOVERFLOW + /* Debugging check for stack overflow: is there less than 2KB free? */ + { + long sp; + + sp = __get_SP() & (THREAD_SIZE-1); + + if (unlikely(sp < (sizeof(struct thread_info) + 2048))) { + printk("do_IRQ: stack overflow: %ld\n", + sp - sizeof(struct thread_info)); + dump_stack(); + } + } +#endif + + lpaca = get_paca(); +#ifdef CONFIG_SMP + if (lpaca->lppaca.int_dword.fields.ipi_cnt) { + lpaca->lppaca.int_dword.fields.ipi_cnt = 0; + iSeries_smp_message_recv(regs); + } +#endif /* CONFIG_SMP */ + if (hvlpevent_is_pending()) + process_hvlpevents(regs); + + irq_exit(); + + if (lpaca->lppaca.int_dword.fields.decr_int) { + lpaca->lppaca.int_dword.fields.decr_int = 0; + /* Signal a fake decrementer interrupt */ + timer_interrupt(regs); + } +} + +#else /* CONFIG_PPC_ISERIES */ + +void do_IRQ(struct pt_regs *regs) +{ + int irq; +#ifdef CONFIG_IRQSTACKS + struct thread_info *curtp, *irqtp; +#endif + + irq_enter(); + +#ifdef CONFIG_DEBUG_STACKOVERFLOW + /* Debugging check for stack overflow: is there less than 2KB free? */ + { + long sp; + + sp = __get_SP() & (THREAD_SIZE-1); + + if (unlikely(sp < (sizeof(struct thread_info) + 2048))) { + printk("do_IRQ: stack overflow: %ld\n", + sp - sizeof(struct thread_info)); + dump_stack(); + } + } +#endif + + /* + * Every platform is required to implement ppc_md.get_irq. + * This function will either return an irq number or -1 to + * indicate there are no more pending. + * The value -2 is for buggy hardware and means that this IRQ + * has already been handled. -- Tom + */ + irq = ppc_md.get_irq(regs); + + if (irq >= 0) { +#ifdef CONFIG_IRQSTACKS + /* Switch to the irq stack to handle this */ + curtp = current_thread_info(); + irqtp = hardirq_ctx[smp_processor_id()]; + if (curtp != irqtp) { + irqtp->task = curtp->task; + irqtp->flags = 0; + call___do_IRQ(irq, regs, irqtp); + irqtp->task = NULL; + if (irqtp->flags) + set_bits(irqtp->flags, &curtp->flags); + } else +#endif + __do_IRQ(irq, regs); + } else +#ifdef CONFIG_PPC32 + if (irq != -2) +#endif + /* That's not SMP safe ... but who cares ? */ + ppc_spurious_interrupts++; + irq_exit(); +} + +#endif /* CONFIG_PPC_ISERIES */ + +void __init init_IRQ(void) +{ +#ifdef CONFIG_PPC64 + static int once = 0; + + if (once) + return; + + once++; + +#endif + ppc_md.init_IRQ(); +#ifdef CONFIG_PPC64 + irq_ctx_init(); +#endif +} + +#ifdef CONFIG_PPC64 +#ifndef CONFIG_PPC_ISERIES +/* + * Virtual IRQ mapping code, used on systems with XICS interrupt controllers. + */ + +#define UNDEFINED_IRQ 0xffffffff +unsigned int virt_irq_to_real_map[NR_IRQS]; + +/* + * Don't use virtual irqs 0, 1, 2 for devices. + * The pcnet32 driver considers interrupt numbers < 2 to be invalid, + * and 2 is the XICS IPI interrupt. + * We limit virtual irqs to 17 less than NR_IRQS so that when we + * offset them by 16 (to reserve the first 16 for ISA interrupts) + * we don't end up with an interrupt number >= NR_IRQS. + */ +#define MIN_VIRT_IRQ 3 +#define MAX_VIRT_IRQ (NR_IRQS - NUM_ISA_INTERRUPTS - 1) +#define NR_VIRT_IRQS (MAX_VIRT_IRQ - MIN_VIRT_IRQ + 1) + +void +virt_irq_init(void) +{ + int i; + for (i = 0; i < NR_IRQS; i++) + virt_irq_to_real_map[i] = UNDEFINED_IRQ; +} + +/* Create a mapping for a real_irq if it doesn't already exist. + * Return the virtual irq as a convenience. + */ +int virt_irq_create_mapping(unsigned int real_irq) +{ + unsigned int virq, first_virq; + static int warned; + + if (ppc64_interrupt_controller == IC_OPEN_PIC) + return real_irq; /* no mapping for openpic (for now) */ + + if (ppc64_interrupt_controller == IC_CELL_PIC) + return real_irq; /* no mapping for iic either */ + + /* don't map interrupts < MIN_VIRT_IRQ */ + if (real_irq < MIN_VIRT_IRQ) { + virt_irq_to_real_map[real_irq] = real_irq; + return real_irq; + } + + /* map to a number between MIN_VIRT_IRQ and MAX_VIRT_IRQ */ + virq = real_irq; + if (virq > MAX_VIRT_IRQ) + virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ; + + /* search for this number or a free slot */ + first_virq = virq; + while (virt_irq_to_real_map[virq] != UNDEFINED_IRQ) { + if (virt_irq_to_real_map[virq] == real_irq) + return virq; + if (++virq > MAX_VIRT_IRQ) + virq = MIN_VIRT_IRQ; + if (virq == first_virq) + goto nospace; /* oops, no free slots */ + } + + virt_irq_to_real_map[virq] = real_irq; + return virq; + + nospace: + if (!warned) { + printk(KERN_CRIT "Interrupt table is full\n"); + printk(KERN_CRIT "Increase NR_IRQS (currently %d) " + "in your kernel sources and rebuild.\n", NR_IRQS); + warned = 1; + } + return NO_IRQ; +} + +/* + * In most cases will get a hit on the very first slot checked in the + * virt_irq_to_real_map. Only when there are a large number of + * IRQs will this be expensive. + */ +unsigned int real_irq_to_virt_slowpath(unsigned int real_irq) +{ + unsigned int virq; + unsigned int first_virq; + + virq = real_irq; + + if (virq > MAX_VIRT_IRQ) + virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ; + + first_virq = virq; + + do { + if (virt_irq_to_real_map[virq] == real_irq) + return virq; + + virq++; + + if (virq >= MAX_VIRT_IRQ) + virq = 0; + + } while (first_virq != virq); + + return NO_IRQ; + +} + +#endif /* CONFIG_PPC_ISERIES */ + +#ifdef CONFIG_IRQSTACKS +struct thread_info *softirq_ctx[NR_CPUS]; +struct thread_info *hardirq_ctx[NR_CPUS]; + +void irq_ctx_init(void) +{ + struct thread_info *tp; + int i; + + for_each_cpu(i) { + memset((void *)softirq_ctx[i], 0, THREAD_SIZE); + tp = softirq_ctx[i]; + tp->cpu = i; + tp->preempt_count = SOFTIRQ_OFFSET; + + memset((void *)hardirq_ctx[i], 0, THREAD_SIZE); + tp = hardirq_ctx[i]; + tp->cpu = i; + tp->preempt_count = HARDIRQ_OFFSET; + } +} + +void do_softirq(void) +{ + unsigned long flags; + struct thread_info *curtp, *irqtp; + + if (in_interrupt()) + return; + + local_irq_save(flags); + + if (local_softirq_pending()) { + curtp = current_thread_info(); + irqtp = softirq_ctx[smp_processor_id()]; + irqtp->task = curtp->task; + call_do_softirq(irqtp); + irqtp->task = NULL; + } + + local_irq_restore(flags); +} +EXPORT_SYMBOL(do_softirq); + +#endif /* CONFIG_IRQSTACKS */ + +static int __init setup_noirqdistrib(char *str) +{ + distribute_irqs = 0; + return 1; +} + +__setup("noirqdistrib", setup_noirqdistrib); +#endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 83a49e80ac29..90040c49494d 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -74,6 +74,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock); #define GATWICK_IRQ_POOL_SIZE 10 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; + /* * Mark an irq as "lost". This is only used on the pmac * since it can lose interrupts (see pmac_set_irq_mask). diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 76a55a438f23..17a4da65e275 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -12,7 +12,7 @@ extra-$(CONFIG_6xx) += idle_6xx.o extra-$(CONFIG_POWER4) += idle_power4.o extra-y += vmlinux.lds -obj-y := entry.o traps.o irq.o idle.o time.o misc.o \ +obj-y := entry.o traps.o idle.o time.o misc.o \ process.o align.o \ setup.o \ ppc_htab.o @@ -38,8 +38,7 @@ endif # These are here while we do the architecture merge else -obj-y := irq.o idle.o \ - align.o +obj-y := idle.o align.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/ppc/kernel/irq.c b/arch/ppc/kernel/irq.c deleted file mode 100644 index fbb2b9f8922c..000000000000 --- a/arch/ppc/kernel/irq.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * arch/ppc/kernel/irq.c - * - * Derived from arch/i386/kernel/irq.c - * Copyright (C) 1992 Linus Torvalds - * Adapted from arch/i386 by Gary Thomas - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * Updated and modified by Cort Dougan - * Copyright (C) 1996-2001 Cort Dougan - * Adapted for Power Macintosh by Paul Mackerras - * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). - * - * This file contains the code used by various IRQ handling routines: - * asking for different IRQ's should be done through these routines - * instead of just grabbing them. Thus setups with different IRQ numbers - * shouldn't result in any weird surprises, and installing new handlers - * should be easier. - * - * The MPC8xx has an interrupt mask in the SIU. If a bit is set, the - * interrupt is _enabled_. As expected, IRQ0 is bit 0 in the 32-bit - * mask register (of which only 16 are defined), hence the weird shifting - * and complement of the cached_irq_mask. I want to be able to stuff - * this right into the SIU SMASK register. - * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx - * to reduce code space and undefined function references. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) - -extern atomic_t ipi_recv; -extern atomic_t ipi_sent; - -#define MAXCOUNT 10000000 - -int ppc_spurious_interrupts = 0; -struct irqaction *ppc_irq_action[NR_IRQS]; -unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; -unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; -atomic_t ppc_n_lost_interrupts; - -#ifdef CONFIG_TAU_INT -extern int tau_initialized; -extern int tau_interrupts(int); -#endif - -int show_interrupts(struct seq_file *p, void *v) -{ - int i = *(loff_t *) v, j; - struct irqaction * action; - unsigned long flags; - - if (i == 0) { - seq_puts(p, " "); - for (j=0; jhandler ) - goto skip; - seq_printf(p, "%3d: ", i); -#ifdef CONFIG_SMP - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", - kstat_cpu(j).irqs[i]); -#else - seq_printf(p, "%10u ", kstat_irqs(i)); -#endif /* CONFIG_SMP */ - if (irq_desc[i].handler) - seq_printf(p, " %s ", irq_desc[i].handler->typename); - else - seq_puts(p, " None "); - seq_printf(p, "%s", (irq_desc[i].status & IRQ_LEVEL) ? "Level " : "Edge "); - seq_printf(p, " %s", action->name); - for (action = action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - seq_putc(p, '\n'); -skip: - spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) { -#ifdef CONFIG_TAU_INT - if (tau_initialized){ - seq_puts(p, "TAU: "); - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", tau_interrupts(j)); - seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); - } -#endif -#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) - /* should this be per processor send/receive? */ - seq_printf(p, "IPI (recv/sent): %10u/%u\n", - atomic_read(&ipi_recv), atomic_read(&ipi_sent)); -#endif - seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); - } - return 0; -} - -void do_IRQ(struct pt_regs *regs) -{ - int irq, first = 1; - irq_enter(); - - /* - * Every platform is required to implement ppc_md.get_irq. - * This function will either return an irq number or -1 to - * indicate there are no more pending. But the first time - * through the loop this means there wasn't and IRQ pending. - * The value -2 is for buggy hardware and means that this IRQ - * has already been handled. -- Tom - */ - while ((irq = ppc_md.get_irq(regs)) >= 0) { - __do_IRQ(irq, regs); - first = 0; - } - if (irq != -2 && first) - /* That's not SMP safe ... but who cares ? */ - ppc_spurious_interrupts++; - irq_exit(); -} - -void __init init_IRQ(void) -{ - ppc_md.init_IRQ(); -} diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index e0ca61b37f4f..c4d5b5988430 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -78,7 +78,6 @@ EXPORT_SYMBOL(program_check_exception); EXPORT_SYMBOL(single_step_exception); EXPORT_SYMBOL(sys_sigreturn); EXPORT_SYMBOL(ppc_n_lost_interrupts); -EXPORT_SYMBOL(ppc_lost_interrupts); EXPORT_SYMBOL(ISA_DMA_THRESHOLD); EXPORT_SYMBOL(DMA_MODE_READ); diff --git a/arch/ppc/platforms/pmac_pic.c b/arch/ppc/platforms/pmac_pic.c index 9f2d95ea8564..4742bf609357 100644 --- a/arch/ppc/platforms/pmac_pic.c +++ b/arch/ppc/platforms/pmac_pic.c @@ -75,6 +75,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock); #define GATWICK_IRQ_POOL_SIZE 10 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; + /* * Mark an irq as "lost". This is only used on the pmac * since it can lose interrupts (see pmac_set_irq_mask). diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index c441aebe7648..13e479846249 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -11,7 +11,7 @@ obj-y := misc.o prom.o endif -obj-y += irq.o idle.o dma.o \ +obj-y += idle.o dma.o \ align.o pacaData.o \ udbg.o ioctl32.o \ rtc.o \ diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c deleted file mode 100644 index bd6a95a5914d..000000000000 --- a/arch/ppc64/kernel/irq.c +++ /dev/null @@ -1,415 +0,0 @@ -/* - * arch/ppc/kernel/irq.c - * - * Derived from arch/i386/kernel/irq.c - * Copyright (C) 1992 Linus Torvalds - * Adapted from arch/i386 by Gary Thomas - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * Updated and modified by Cort Dougan (cort@cs.nmt.edu) - * Copyright (C) 1996 Cort Dougan - * Adapted for Power Macintosh by Paul Mackerras - * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * This file contains the code used by various IRQ handling routines: - * asking for different IRQ's should be done through these routines - * instead of just grabbing them. Thus setups with different IRQ numbers - * shouldn't result in any weird surprises, and installing new handlers - * should be easier. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_SMP -extern void iSeries_smp_message_recv( struct pt_regs * ); -#endif - -extern irq_desc_t irq_desc[NR_IRQS]; -EXPORT_SYMBOL(irq_desc); - -int distribute_irqs = 1; -int __irq_offset_value; -int ppc_spurious_interrupts; -u64 ppc64_interrupt_controller; - -int show_interrupts(struct seq_file *p, void *v) -{ - int i = *(loff_t *) v, j; - struct irqaction * action; - irq_desc_t *desc; - unsigned long flags; - - if (i == 0) { - seq_printf(p, " "); - for (j=0; jlock, flags); - action = desc->action; - if (!action || !action->handler) - goto skip; - seq_printf(p, "%3d: ", i); -#ifdef CONFIG_SMP - for (j = 0; j < NR_CPUS; j++) { - if (cpu_online(j)) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); - } -#else - seq_printf(p, "%10u ", kstat_irqs(i)); -#endif /* CONFIG_SMP */ - if (desc->handler) - seq_printf(p, " %s ", desc->handler->typename ); - else - seq_printf(p, " None "); - seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge "); - seq_printf(p, " %s",action->name); - for (action=action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - seq_putc(p, '\n'); -skip: - spin_unlock_irqrestore(&desc->lock, flags); - } else if (i == NR_IRQS) - seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); - return 0; -} - -#ifdef CONFIG_HOTPLUG_CPU -void fixup_irqs(cpumask_t map) -{ - unsigned int irq; - static int warned; - - for_each_irq(irq) { - cpumask_t mask; - - if (irq_desc[irq].status & IRQ_PER_CPU) - continue; - - cpus_and(mask, irq_affinity[irq], map); - if (any_online_cpu(mask) == NR_CPUS) { - printk("Breaking affinity for irq %i\n", irq); - mask = map; - } - if (irq_desc[irq].handler->set_affinity) - irq_desc[irq].handler->set_affinity(irq, mask); - else if (irq_desc[irq].action && !(warned++)) - printk("Cannot set affinity for irq %i\n", irq); - } - - local_irq_enable(); - mdelay(1); - local_irq_disable(); -} -#endif - -#ifdef CONFIG_PPC_ISERIES -void do_IRQ(struct pt_regs *regs) -{ - struct paca_struct *lpaca; - - irq_enter(); - -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: is there less than 2KB free? */ - { - long sp; - - sp = __get_SP() & (THREAD_SIZE-1); - - if (unlikely(sp < (sizeof(struct thread_info) + 2048))) { - printk("do_IRQ: stack overflow: %ld\n", - sp - sizeof(struct thread_info)); - dump_stack(); - } - } -#endif - - lpaca = get_paca(); -#ifdef CONFIG_SMP - if (lpaca->lppaca.int_dword.fields.ipi_cnt) { - lpaca->lppaca.int_dword.fields.ipi_cnt = 0; - iSeries_smp_message_recv(regs); - } -#endif /* CONFIG_SMP */ - if (hvlpevent_is_pending()) - process_hvlpevents(regs); - - irq_exit(); - - if (lpaca->lppaca.int_dword.fields.decr_int) { - lpaca->lppaca.int_dword.fields.decr_int = 0; - /* Signal a fake decrementer interrupt */ - timer_interrupt(regs); - } -} - -#else /* CONFIG_PPC_ISERIES */ - -void do_IRQ(struct pt_regs *regs) -{ - int irq; -#ifdef CONFIG_IRQSTACKS - struct thread_info *curtp, *irqtp; -#endif - - irq_enter(); - -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: is there less than 2KB free? */ - { - long sp; - - sp = __get_SP() & (THREAD_SIZE-1); - - if (unlikely(sp < (sizeof(struct thread_info) + 2048))) { - printk("do_IRQ: stack overflow: %ld\n", - sp - sizeof(struct thread_info)); - dump_stack(); - } - } -#endif - - irq = ppc_md.get_irq(regs); - - if (irq >= 0) { -#ifdef CONFIG_IRQSTACKS - /* Switch to the irq stack to handle this */ - curtp = current_thread_info(); - irqtp = hardirq_ctx[smp_processor_id()]; - if (curtp != irqtp) { - irqtp->task = curtp->task; - irqtp->flags = 0; - call___do_IRQ(irq, regs, irqtp); - irqtp->task = NULL; - if (irqtp->flags) - set_bits(irqtp->flags, &curtp->flags); - } else -#endif - __do_IRQ(irq, regs); - } else - /* That's not SMP safe ... but who cares ? */ - ppc_spurious_interrupts++; - - irq_exit(); -} -#endif /* CONFIG_PPC_ISERIES */ - -void __init init_IRQ(void) -{ - static int once = 0; - - if (once) - return; - - once++; - - ppc_md.init_IRQ(); - irq_ctx_init(); -} - -#ifndef CONFIG_PPC_ISERIES -/* - * Virtual IRQ mapping code, used on systems with XICS interrupt controllers. - */ - -#define UNDEFINED_IRQ 0xffffffff -unsigned int virt_irq_to_real_map[NR_IRQS]; - -/* - * Don't use virtual irqs 0, 1, 2 for devices. - * The pcnet32 driver considers interrupt numbers < 2 to be invalid, - * and 2 is the XICS IPI interrupt. - * We limit virtual irqs to 17 less than NR_IRQS so that when we - * offset them by 16 (to reserve the first 16 for ISA interrupts) - * we don't end up with an interrupt number >= NR_IRQS. - */ -#define MIN_VIRT_IRQ 3 -#define MAX_VIRT_IRQ (NR_IRQS - NUM_ISA_INTERRUPTS - 1) -#define NR_VIRT_IRQS (MAX_VIRT_IRQ - MIN_VIRT_IRQ + 1) - -void -virt_irq_init(void) -{ - int i; - for (i = 0; i < NR_IRQS; i++) - virt_irq_to_real_map[i] = UNDEFINED_IRQ; -} - -/* Create a mapping for a real_irq if it doesn't already exist. - * Return the virtual irq as a convenience. - */ -int virt_irq_create_mapping(unsigned int real_irq) -{ - unsigned int virq, first_virq; - static int warned; - - if (ppc64_interrupt_controller == IC_OPEN_PIC) - return real_irq; /* no mapping for openpic (for now) */ - - if (ppc64_interrupt_controller == IC_CELL_PIC) - return real_irq; /* no mapping for iic either */ - - /* don't map interrupts < MIN_VIRT_IRQ */ - if (real_irq < MIN_VIRT_IRQ) { - virt_irq_to_real_map[real_irq] = real_irq; - return real_irq; - } - - /* map to a number between MIN_VIRT_IRQ and MAX_VIRT_IRQ */ - virq = real_irq; - if (virq > MAX_VIRT_IRQ) - virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ; - - /* search for this number or a free slot */ - first_virq = virq; - while (virt_irq_to_real_map[virq] != UNDEFINED_IRQ) { - if (virt_irq_to_real_map[virq] == real_irq) - return virq; - if (++virq > MAX_VIRT_IRQ) - virq = MIN_VIRT_IRQ; - if (virq == first_virq) - goto nospace; /* oops, no free slots */ - } - - virt_irq_to_real_map[virq] = real_irq; - return virq; - - nospace: - if (!warned) { - printk(KERN_CRIT "Interrupt table is full\n"); - printk(KERN_CRIT "Increase NR_IRQS (currently %d) " - "in your kernel sources and rebuild.\n", NR_IRQS); - warned = 1; - } - return NO_IRQ; -} - -/* - * In most cases will get a hit on the very first slot checked in the - * virt_irq_to_real_map. Only when there are a large number of - * IRQs will this be expensive. - */ -unsigned int real_irq_to_virt_slowpath(unsigned int real_irq) -{ - unsigned int virq; - unsigned int first_virq; - - virq = real_irq; - - if (virq > MAX_VIRT_IRQ) - virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ; - - first_virq = virq; - - do { - if (virt_irq_to_real_map[virq] == real_irq) - return virq; - - virq++; - - if (virq >= MAX_VIRT_IRQ) - virq = 0; - - } while (first_virq != virq); - - return NO_IRQ; - -} - -#endif /* CONFIG_PPC_ISERIES */ - -#ifdef CONFIG_IRQSTACKS -struct thread_info *softirq_ctx[NR_CPUS]; -struct thread_info *hardirq_ctx[NR_CPUS]; - -void irq_ctx_init(void) -{ - struct thread_info *tp; - int i; - - for_each_cpu(i) { - memset((void *)softirq_ctx[i], 0, THREAD_SIZE); - tp = softirq_ctx[i]; - tp->cpu = i; - tp->preempt_count = SOFTIRQ_OFFSET; - - memset((void *)hardirq_ctx[i], 0, THREAD_SIZE); - tp = hardirq_ctx[i]; - tp->cpu = i; - tp->preempt_count = HARDIRQ_OFFSET; - } -} - -void do_softirq(void) -{ - unsigned long flags; - struct thread_info *curtp, *irqtp; - - if (in_interrupt()) - return; - - local_irq_save(flags); - - if (local_softirq_pending()) { - curtp = current_thread_info(); - irqtp = softirq_ctx[smp_processor_id()]; - irqtp->task = curtp->task; - call_do_softirq(irqtp); - irqtp->task = NULL; - } - - local_irq_restore(flags); -} -EXPORT_SYMBOL(do_softirq); - -#endif /* CONFIG_IRQSTACKS */ - -static int __init setup_noirqdistrib(char *str) -{ - distribute_irqs = 0; - return 1; -} - -__setup("noirqdistrib", setup_noirqdistrib); diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h index 225dc182ef3b..c9fbcede0ef9 100644 --- a/include/asm-powerpc/irq.h +++ b/include/asm-powerpc/irq.h @@ -429,7 +429,6 @@ extern u64 ppc64_interrupt_controller; #define NR_MASK_WORDS ((NR_IRQS + 31) / 32) /* pedantic: these are long because they are used with set_bit --RR */ extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; -extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; extern atomic_t ppc_n_lost_interrupts; #define virt_irq_create_mapping(x) (x) -- cgit v1.2.3 From c5ff700116a56a870ef40cc4ac6f19bf2530b466 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Wed, 9 Nov 2005 11:21:07 +1100 Subject: [PATCH] powerpc: Merge signal.h Having already merged the ppc and ppc64 versions of signal.c, this patch finishes the job by merging signal.h. The two versions were almost identical already. Notable changes: - We use BITS_PER_LONG to correctly size sigset_t - Remove some uneeded #includes and struct forward declarations. This does mean adding an include to signal_32.c which relied on the indirect inclusion of sigcontext.h - As the ppc64 version, the merged signal.h has prototypes for do_signal() and do_signal32(). Thus remove extra prototypes from ppc_ksyms.c which had them directly. Built and booted on POWER5 LPAR (ARCH=ppc64 and ARCH=powerpc). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/ppc_ksyms.c | 2 +- arch/powerpc/kernel/signal_32.c | 1 + arch/ppc/kernel/ppc_ksyms.c | 2 +- include/asm-powerpc/signal.h | 150 +++++++++++++++++++++++++++++++++++++++ include/asm-ppc/signal.h | 153 ---------------------------------------- include/asm-ppc64/signal.h | 132 ---------------------------------- 6 files changed, 153 insertions(+), 287 deletions(-) create mode 100644 include/asm-powerpc/signal.h delete mode 100644 include/asm-ppc/signal.h delete mode 100644 include/asm-ppc64/signal.h (limited to 'include') diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 47d6f7e2ea9f..5d9fd0369aad 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -44,6 +44,7 @@ #include #include #include +#include #ifdef CONFIG_8xx #include @@ -56,7 +57,6 @@ extern void machine_check_exception(struct pt_regs *regs); extern void alignment_exception(struct pt_regs *regs); extern void program_check_exception(struct pt_regs *regs); extern void single_step_exception(struct pt_regs *regs); -extern int do_signal(sigset_t *, struct pt_regs *); extern int pmac_newworld; extern int sys_sigreturn(struct pt_regs *regs); diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 081d931eae48..a7c4515f320f 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -42,6 +42,7 @@ #include #include +#include #ifdef CONFIG_PPC64 #include "ppc32.h" #include diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index e0ca61b37f4f..fc0d05c69895 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -46,6 +46,7 @@ #include #include #include +#include #ifdef CONFIG_8xx #include @@ -57,7 +58,6 @@ extern void machine_check_exception(struct pt_regs *regs); extern void alignment_exception(struct pt_regs *regs); extern void program_check_exception(struct pt_regs *regs); extern void single_step_exception(struct pt_regs *regs); -extern int do_signal(sigset_t *, struct pt_regs *); extern int pmac_newworld; extern int sys_sigreturn(struct pt_regs *regs); diff --git a/include/asm-powerpc/signal.h b/include/asm-powerpc/signal.h new file mode 100644 index 000000000000..694c8d2dab87 --- /dev/null +++ b/include/asm-powerpc/signal.h @@ -0,0 +1,150 @@ +#ifndef _ASM_POWERPC_SIGNAL_H +#define _ASM_POWERPC_SIGNAL_H + +#include +#include + +#define _NSIG 64 +#define _NSIG_BPW BITS_PER_LONG +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK is not currently supported, but will allow sigaltstack(2). + * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001U +#define SA_NOCLDWAIT 0x00000002U +#define SA_SIGINFO 0x00000004U +#define SA_ONSTACK 0x08000000U +#define SA_RESTART 0x10000000U +#define SA_NODEFER 0x40000000U +#define SA_RESETHAND 0x80000000U + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND +#define SA_INTERRUPT 0x20000000u /* dummy -- ignored */ + +#define SA_RESTORER 0x04000000U + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + __sigrestore_t sa_restorer; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +struct pt_regs; +extern int do_signal(sigset_t *oldset, struct pt_regs *regs); +extern int do_signal32(sigset_t *oldset, struct pt_regs *regs); +#define ptrace_signal_deliver(regs, cookie) do { } while (0) +#endif /* __KERNEL__ */ + +#ifndef __powerpc64__ +/* + * These are parameters to dbg_sigreturn syscall. They enable or + * disable certain debugging things that can be done from signal + * handlers. The dbg_sigreturn syscall *must* be called from a + * SA_SIGINFO signal so the ucontext can be passed to it. It takes an + * array of struct sig_dbg_op, which has the debug operations to + * perform before returning from the signal. + */ +struct sig_dbg_op { + int dbg_type; + unsigned long dbg_value; +}; + +/* Enable or disable single-stepping. The value sets the state. */ +#define SIG_DBG_SINGLE_STEPPING 1 + +/* Enable or disable branch tracing. The value sets the state. */ +#define SIG_DBG_BRANCH_TRACING 2 +#endif /* ! __powerpc64__ */ + +#endif /* _ASM_POWERPC_SIGNAL_H */ diff --git a/include/asm-ppc/signal.h b/include/asm-ppc/signal.h deleted file mode 100644 index caf6ede3710f..000000000000 --- a/include/asm-ppc/signal.h +++ /dev/null @@ -1,153 +0,0 @@ -#ifndef _ASMPPC_SIGNAL_H -#define _ASMPPC_SIGNAL_H - -#ifdef __KERNEL__ -#include -#endif /* __KERNEL__ */ - -/* Avoid too many header ordering problems. */ -struct siginfo; - -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK is not currently supported, but will allow sigaltstack(2). - * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND -#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */ - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include -#define ptrace_signal_deliver(regs, cookie) do { } while (0) -#endif /* __KERNEL__ */ - -/* - * These are parameters to dbg_sigreturn syscall. They enable or - * disable certain debugging things that can be done from signal - * handlers. The dbg_sigreturn syscall *must* be called from a - * SA_SIGINFO signal so the ucontext can be passed to it. It takes an - * array of struct sig_dbg_op, which has the debug operations to - * perform before returning from the signal. - */ -struct sig_dbg_op { - int dbg_type; - unsigned long dbg_value; -}; - -/* Enable or disable single-stepping. The value sets the state. */ -#define SIG_DBG_SINGLE_STEPPING 1 - -/* Enable or disable branch tracing. The value sets the state. */ -#define SIG_DBG_BRANCH_TRACING 2 - -#endif diff --git a/include/asm-ppc64/signal.h b/include/asm-ppc64/signal.h deleted file mode 100644 index 432df7dd355d..000000000000 --- a/include/asm-ppc64/signal.h +++ /dev/null @@ -1,132 +0,0 @@ -#ifndef _ASMPPC64_SIGNAL_H -#define _ASMPPC64_SIGNAL_H - -#include -#include -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#define _NSIG 64 -#define _NSIG_BPW 64 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK is not currently supported, but will allow sigaltstack(2). - * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001u -#define SA_NOCLDWAIT 0x00000002u -#define SA_SIGINFO 0x00000004u -#define SA_ONSTACK 0x08000000u -#define SA_RESTART 0x10000000u -#define SA_NODEFER 0x40000000u -#define SA_RESETHAND 0x80000000u - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND -#define SA_INTERRUPT 0x20000000u /* dummy -- ignored */ - -#define SA_RESTORER 0x04000000u - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -struct pt_regs; -struct timespec; -extern int do_signal(sigset_t *oldset, struct pt_regs *regs); -extern int do_signal32(sigset_t *oldset, struct pt_regs *regs); -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* _ASMPPC64_SIGNAL_H */ -- cgit v1.2.3 From 584224e4095d8abcf2bef38efacc291be9a44c20 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Wed, 9 Nov 2005 13:04:06 +1100 Subject: [PATCH] powerpc: Merge current.h This patch merges current.h. This is a one-big-ifdef merge, but both versions are so tiny, I think we can live with it. While we're at it, we get rid of the fairly pointless redirection through get_current() in the ppc64 version. Built and booted on POWER5 LPAR (ARCH=powerpc & ARCH=ppc64). Built for 32-bit pmac (ARCH=powerpc & ARCH=ppc). Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- include/asm-powerpc/current.h | 27 +++++++++++++++++++++++++++ include/asm-ppc/current.h | 11 ----------- include/asm-ppc64/current.h | 16 ---------------- 3 files changed, 27 insertions(+), 27 deletions(-) create mode 100644 include/asm-powerpc/current.h delete mode 100644 include/asm-ppc/current.h delete mode 100644 include/asm-ppc64/current.h (limited to 'include') diff --git a/include/asm-powerpc/current.h b/include/asm-powerpc/current.h new file mode 100644 index 000000000000..82cd4a9ca99a --- /dev/null +++ b/include/asm-powerpc/current.h @@ -0,0 +1,27 @@ +#ifndef _ASM_POWERPC_CURRENT_H +#define _ASM_POWERPC_CURRENT_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +struct task_struct; + +#ifdef __powerpc64__ +#include + +#define current (get_paca()->__current) + +#else + +/* + * We keep `current' in r2 for speed. + */ +register struct task_struct *current asm ("r2"); + +#endif + +#endif /* _ASM_POWERPC_CURRENT_H */ diff --git a/include/asm-ppc/current.h b/include/asm-ppc/current.h deleted file mode 100644 index 8d41501ba10d..000000000000 --- a/include/asm-ppc/current.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _PPC_CURRENT_H -#define _PPC_CURRENT_H - -/* - * We keep `current' in r2 for speed. - */ -register struct task_struct *current asm ("r2"); - -#endif /* !(_PPC_CURRENT_H) */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc64/current.h b/include/asm-ppc64/current.h deleted file mode 100644 index 52ddc60c8b65..000000000000 --- a/include/asm-ppc64/current.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _PPC64_CURRENT_H -#define _PPC64_CURRENT_H - -#include - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define get_current() (get_paca()->__current) -#define current get_current() - -#endif /* !(_PPC64_CURRENT_H) */ -- cgit v1.2.3 From 8882a4da1c932c9f311c9f739e6719adea3e25d9 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Wed, 9 Nov 2005 13:38:01 +1100 Subject: [PATCH] powerpc: Move various ppc64 files with no ppc32 equivalent to powerpc This patch moves a bunch of files from arch/ppc64 and include/asm-ppc64 which have no equivalents in ppc32 code into arch/powerpc and include/asm-powerpc. The file affected are: abs_addr.h compat.h lppaca.h paca.h tce.h cpu_setup_power4.S ioctl32.c firmware.c pacaData.c The only changes apart from the move and corresponding Makefile changes are: - #ifndef/#define in includes updated to _ASM_POWERPC_ form - trailing whitespace removed - comments giving full paths removed - pacaData.c renamed paca.c to remove studlyCaps - Misplaced { moved in lppaca.h Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built for 32-bit powermac (ARCH=powerpc). Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 5 +- arch/powerpc/kernel/cpu_setup_power4.S | 233 +++++++++++++++++++++++++++++++++ arch/powerpc/kernel/firmware.c | 45 +++++++ arch/powerpc/kernel/ioctl32.c | 49 +++++++ arch/powerpc/kernel/paca.c | 143 ++++++++++++++++++++ arch/ppc64/kernel/Makefile | 9 +- arch/ppc64/kernel/cpu_setup_power4.S | 233 --------------------------------- arch/ppc64/kernel/firmware.c | 47 ------- arch/ppc64/kernel/ioctl32.c | 49 ------- arch/ppc64/kernel/pacaData.c | 143 -------------------- include/asm-powerpc/abs_addr.h | 73 +++++++++++ include/asm-powerpc/compat.h | 205 +++++++++++++++++++++++++++++ include/asm-powerpc/lppaca.h | 131 ++++++++++++++++++ include/asm-powerpc/paca.h | 120 +++++++++++++++++ include/asm-powerpc/tce.h | 64 +++++++++ include/asm-ppc64/abs_addr.h | 73 ----------- include/asm-ppc64/compat.h | 205 ----------------------------- include/asm-ppc64/lppaca.h | 132 ------------------- include/asm-ppc64/paca.h | 121 ----------------- include/asm-ppc64/tce.h | 64 --------- 20 files changed, 1070 insertions(+), 1074 deletions(-) create mode 100644 arch/powerpc/kernel/cpu_setup_power4.S create mode 100644 arch/powerpc/kernel/firmware.c create mode 100644 arch/powerpc/kernel/ioctl32.c create mode 100644 arch/powerpc/kernel/paca.c delete mode 100644 arch/ppc64/kernel/cpu_setup_power4.S delete mode 100644 arch/ppc64/kernel/firmware.c delete mode 100644 arch/ppc64/kernel/ioctl32.c delete mode 100644 arch/ppc64/kernel/pacaData.c create mode 100644 include/asm-powerpc/abs_addr.h create mode 100644 include/asm-powerpc/compat.h create mode 100644 include/asm-powerpc/lppaca.h create mode 100644 include/asm-powerpc/paca.h create mode 100644 include/asm-powerpc/tce.h delete mode 100644 include/asm-ppc64/abs_addr.h delete mode 100644 include/asm-ppc64/compat.h delete mode 100644 include/asm-ppc64/lppaca.h delete mode 100644 include/asm-ppc64/paca.h delete mode 100644 include/asm-ppc64/tce.h (limited to 'include') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b3ae2993efb8..103cb8128ef4 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -4,6 +4,7 @@ ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc +CFLAGS_ioctl32.o += -Ifs/ endif ifeq ($(CONFIG_PPC32),y) CFLAGS_prom_init.o += -fPIC @@ -13,7 +14,9 @@ endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ signal_32.o pmc.o obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ - signal_64.o ptrace32.o systbl.o + signal_64.o ptrace32.o systbl.o \ + paca.o ioctl32.o cpu_setup_power4.o \ + firmware.o obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o diff --git a/arch/powerpc/kernel/cpu_setup_power4.S b/arch/powerpc/kernel/cpu_setup_power4.S new file mode 100644 index 000000000000..cca942fe6115 --- /dev/null +++ b/arch/powerpc/kernel/cpu_setup_power4.S @@ -0,0 +1,233 @@ +/* + * This file contains low level CPU setup functions. + * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +_GLOBAL(__970_cpu_preinit) + /* + * Do nothing if not running in HV mode + */ + mfmsr r0 + rldicl. r0,r0,4,63 + beqlr + + /* + * Deal only with PPC970 and PPC970FX. + */ + mfspr r0,SPRN_PVR + srwi r0,r0,16 + cmpwi r0,0x39 + beq 1f + cmpwi r0,0x3c + beq 1f + cmpwi r0,0x44 + bnelr +1: + + /* Make sure HID4:rm_ci is off before MMU is turned off, that large + * pages are enabled with HID4:61 and clear HID5:DCBZ_size and + * HID5:DCBZ32_ill + */ + li r0,0 + mfspr r3,SPRN_HID4 + rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ + rldimi r3,r0,2,61 /* clear bit 61 (lg_pg_en) */ + sync + mtspr SPRN_HID4,r3 + isync + sync + mfspr r3,SPRN_HID5 + rldimi r3,r0,6,56 /* clear bits 56 & 57 (DCBZ*) */ + sync + mtspr SPRN_HID5,r3 + isync + sync + + /* Setup some basic HID1 features */ + mfspr r0,SPRN_HID1 + li r3,0x1200 /* enable i-fetch cacheability */ + sldi r3,r3,44 /* and prefetch */ + or r0,r0,r3 + mtspr SPRN_HID1,r0 + mtspr SPRN_HID1,r0 + isync + + /* Clear HIOR */ + li r0,0 + sync + mtspr SPRN_HIOR,0 /* Clear interrupt prefix */ + isync + blr + +_GLOBAL(__setup_cpu_power4) + blr + +_GLOBAL(__setup_cpu_be) + /* Set large page sizes LP=0: 16MB, LP=1: 64KB */ + addi r3, 0, 0 + ori r3, r3, HID6_LB + sldi r3, r3, 32 + nor r3, r3, r3 + mfspr r4, SPRN_HID6 + and r4, r4, r3 + addi r3, 0, 0x02000 + sldi r3, r3, 32 + or r4, r4, r3 + mtspr SPRN_HID6, r4 + blr + +_GLOBAL(__setup_cpu_ppc970) + mfspr r0,SPRN_HID0 + li r11,5 /* clear DOZE and SLEEP */ + rldimi r0,r11,52,8 /* set NAP and DPM */ + mtspr SPRN_HID0,r0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + sync + isync + blr + +/* Definitions for the table use to save CPU states */ +#define CS_HID0 0 +#define CS_HID1 8 +#define CS_HID4 16 +#define CS_HID5 24 +#define CS_SIZE 32 + + .data + .balign L1_CACHE_BYTES,0 +cpu_state_storage: + .space CS_SIZE + .balign L1_CACHE_BYTES,0 + .text + +/* Called in normal context to backup CPU 0 state. This + * does not include cache settings. This function is also + * called for machine sleep. This does not include the MMU + * setup, BATs, etc... but rather the "special" registers + * like HID0, HID1, HID4, etc... + */ +_GLOBAL(__save_cpu_setup) + /* Some CR fields are volatile, we back it up all */ + mfcr r7 + + /* Get storage ptr */ + LOADADDR(r5,cpu_state_storage) + + /* We only deal with 970 for now */ + mfspr r0,SPRN_PVR + srwi r0,r0,16 + cmpwi r0,0x39 + beq 1f + cmpwi r0,0x3c + beq 1f + cmpwi r0,0x44 + bne 2f + +1: /* Save HID0,1,4 and 5 */ + mfspr r3,SPRN_HID0 + std r3,CS_HID0(r5) + mfspr r3,SPRN_HID1 + std r3,CS_HID1(r5) + mfspr r3,SPRN_HID4 + std r3,CS_HID4(r5) + mfspr r3,SPRN_HID5 + std r3,CS_HID5(r5) + +2: + mtcr r7 + blr + +/* Called with no MMU context (typically MSR:IR/DR off) to + * restore CPU state as backed up by the previous + * function. This does not include cache setting + */ +_GLOBAL(__restore_cpu_setup) + /* Get storage ptr (FIXME when using anton reloc as we + * are running with translation disabled here + */ + LOADADDR(r5,cpu_state_storage) + + /* We only deal with 970 for now */ + mfspr r0,SPRN_PVR + srwi r0,r0,16 + cmpwi r0,0x39 + beq 1f + cmpwi r0,0x3c + beq 1f + cmpwi r0,0x44 + bnelr + +1: /* Before accessing memory, we make sure rm_ci is clear */ + li r0,0 + mfspr r3,SPRN_HID4 + rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ + sync + mtspr SPRN_HID4,r3 + isync + sync + + /* Clear interrupt prefix */ + li r0,0 + sync + mtspr SPRN_HIOR,0 + isync + + /* Restore HID0 */ + ld r3,CS_HID0(r5) + sync + isync + mtspr SPRN_HID0,r3 + mfspr r3,SPRN_HID0 + mfspr r3,SPRN_HID0 + mfspr r3,SPRN_HID0 + mfspr r3,SPRN_HID0 + mfspr r3,SPRN_HID0 + mfspr r3,SPRN_HID0 + sync + isync + + /* Restore HID1 */ + ld r3,CS_HID1(r5) + sync + isync + mtspr SPRN_HID1,r3 + mtspr SPRN_HID1,r3 + sync + isync + + /* Restore HID4 */ + ld r3,CS_HID4(r5) + sync + isync + mtspr SPRN_HID4,r3 + sync + isync + + /* Restore HID5 */ + ld r3,CS_HID5(r5) + sync + isync + mtspr SPRN_HID5,r3 + sync + isync + blr + diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c new file mode 100644 index 000000000000..65eae752a527 --- /dev/null +++ b/arch/powerpc/kernel/firmware.c @@ -0,0 +1,45 @@ +/* + * Extracted from cputable.c + * + * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * Modifications for ppc64: + * Copyright (C) 2003 Dave Engebretsen + * Copyright (C) 2005 Stephen Rothwell, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +#include + +unsigned long ppc64_firmware_features; + +#ifdef CONFIG_PPC_PSERIES +firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = { + {FW_FEATURE_PFT, "hcall-pft"}, + {FW_FEATURE_TCE, "hcall-tce"}, + {FW_FEATURE_SPRG0, "hcall-sprg0"}, + {FW_FEATURE_DABR, "hcall-dabr"}, + {FW_FEATURE_COPY, "hcall-copy"}, + {FW_FEATURE_ASR, "hcall-asr"}, + {FW_FEATURE_DEBUG, "hcall-debug"}, + {FW_FEATURE_PERF, "hcall-perf"}, + {FW_FEATURE_DUMP, "hcall-dump"}, + {FW_FEATURE_INTERRUPT, "hcall-interrupt"}, + {FW_FEATURE_MIGRATE, "hcall-migrate"}, + {FW_FEATURE_PERFMON, "hcall-perfmon"}, + {FW_FEATURE_CRQ, "hcall-crq"}, + {FW_FEATURE_VIO, "hcall-vio"}, + {FW_FEATURE_RDMA, "hcall-rdma"}, + {FW_FEATURE_LLAN, "hcall-lLAN"}, + {FW_FEATURE_BULK, "hcall-bulk"}, + {FW_FEATURE_XDABR, "hcall-xdabr"}, + {FW_FEATURE_MULTITCE, "hcall-multi-tce"}, + {FW_FEATURE_SPLPAR, "hcall-splpar"}, +}; +#endif diff --git a/arch/powerpc/kernel/ioctl32.c b/arch/powerpc/kernel/ioctl32.c new file mode 100644 index 000000000000..3fa6a93adbd0 --- /dev/null +++ b/arch/powerpc/kernel/ioctl32.c @@ -0,0 +1,49 @@ +/* + * ioctl32.c: Conversion between 32bit and 64bit native ioctls. + * + * Based on sparc64 ioctl32.c by: + * + * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com) + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + * + * ppc64 changes: + * + * Copyright (C) 2000 Ken Aaker (kdaaker@rchland.vnet.ibm.com) + * Copyright (C) 2001 Anton Blanchard (antonb@au.ibm.com) + * + * These routines maintain argument size conversion between 32bit and 64bit + * ioctls. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define INCLUDES +#include "compat_ioctl.c" +#include + +#define CODE +#include "compat_ioctl.c" + +#define HANDLE_IOCTL(cmd,handler) { cmd, (ioctl_trans_handler_t)handler, NULL }, +#define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd,sys_ioctl) + +#define IOCTL_TABLE_START \ + struct ioctl_trans ioctl_start[] = { +#define IOCTL_TABLE_END \ + }; + +IOCTL_TABLE_START +#include +#define DECLARES +#include "compat_ioctl.c" + +/* Little p (/dev/rtc, /dev/envctrl, etc.) */ +COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */ +COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */ + +IOCTL_TABLE_END + +int ioctl_table_size = ARRAY_SIZE(ioctl_start); diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c new file mode 100644 index 000000000000..179948eb0580 --- /dev/null +++ b/arch/powerpc/kernel/paca.c @@ -0,0 +1,143 @@ +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +static union { + struct systemcfg data; + u8 page[PAGE_SIZE]; +} systemcfg_store __attribute__((__section__(".data.page.aligned"))); +struct systemcfg *systemcfg = &systemcfg_store.data; +EXPORT_SYMBOL(systemcfg); + + +/* This symbol is provided by the linker - let it fill in the paca + * field correctly */ +extern unsigned long __toc_start; + +/* The Paca is an array with one entry per processor. Each contains an + * lppaca, which contains the information shared between the + * hypervisor and Linux. Each also contains an ItLpRegSave area which + * is used by the hypervisor to save registers. + * On systems with hardware multi-threading, there are two threads + * per processor. The Paca array must contain an entry for each thread. + * The VPD Areas will give a max logical processors = 2 * max physical + * processors. The processor VPD array needs one entry per physical + * processor (not thread). + */ +#define PACA_INIT_COMMON(number, start, asrr, asrv) \ + .lock_token = 0x8000, \ + .paca_index = (number), /* Paca Index */ \ + .default_decr = 0x00ff0000, /* Initial Decr */ \ + .kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \ + .stab_real = (asrr), /* Real pointer to segment table */ \ + .stab_addr = (asrv), /* Virt pointer to segment table */ \ + .cpu_start = (start), /* Processor start */ \ + .hw_cpu_id = 0xffff, \ + .lppaca = { \ + .desc = 0xd397d781, /* "LpPa" */ \ + .size = sizeof(struct lppaca), \ + .dyn_proc_status = 2, \ + .decr_val = 0x00ff0000, \ + .fpregs_in_use = 1, \ + .end_of_quantum = 0xfffffffffffffffful, \ + .slb_count = 64, \ + .vmxregs_in_use = 0, \ + }, \ + +#ifdef CONFIG_PPC_ISERIES +#define PACA_INIT_ISERIES(number) \ + .lppaca_ptr = &paca[number].lppaca, \ + .reg_save_ptr = &paca[number].reg_save, \ + .reg_save = { \ + .xDesc = 0xd397d9e2, /* "LpRS" */ \ + .xSize = sizeof(struct ItLpRegSave) \ + } + +#define PACA_INIT(number) \ +{ \ + PACA_INIT_COMMON(number, 0, 0, 0) \ + PACA_INIT_ISERIES(number) \ +} + +#define BOOTCPU_PACA_INIT(number) \ +{ \ + PACA_INIT_COMMON(number, 1, 0, (u64)&initial_stab) \ + PACA_INIT_ISERIES(number) \ +} + +#else +#define PACA_INIT(number) \ +{ \ + PACA_INIT_COMMON(number, 0, 0, 0) \ +} + +#define BOOTCPU_PACA_INIT(number) \ +{ \ + PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, (u64)&initial_stab) \ +} +#endif + +struct paca_struct paca[] = { + BOOTCPU_PACA_INIT(0), +#if NR_CPUS > 1 + PACA_INIT( 1), PACA_INIT( 2), PACA_INIT( 3), +#if NR_CPUS > 4 + PACA_INIT( 4), PACA_INIT( 5), PACA_INIT( 6), PACA_INIT( 7), +#if NR_CPUS > 8 + PACA_INIT( 8), PACA_INIT( 9), PACA_INIT( 10), PACA_INIT( 11), + PACA_INIT( 12), PACA_INIT( 13), PACA_INIT( 14), PACA_INIT( 15), + PACA_INIT( 16), PACA_INIT( 17), PACA_INIT( 18), PACA_INIT( 19), + PACA_INIT( 20), PACA_INIT( 21), PACA_INIT( 22), PACA_INIT( 23), + PACA_INIT( 24), PACA_INIT( 25), PACA_INIT( 26), PACA_INIT( 27), + PACA_INIT( 28), PACA_INIT( 29), PACA_INIT( 30), PACA_INIT( 31), +#if NR_CPUS > 32 + PACA_INIT( 32), PACA_INIT( 33), PACA_INIT( 34), PACA_INIT( 35), + PACA_INIT( 36), PACA_INIT( 37), PACA_INIT( 38), PACA_INIT( 39), + PACA_INIT( 40), PACA_INIT( 41), PACA_INIT( 42), PACA_INIT( 43), + PACA_INIT( 44), PACA_INIT( 45), PACA_INIT( 46), PACA_INIT( 47), + PACA_INIT( 48), PACA_INIT( 49), PACA_INIT( 50), PACA_INIT( 51), + PACA_INIT( 52), PACA_INIT( 53), PACA_INIT( 54), PACA_INIT( 55), + PACA_INIT( 56), PACA_INIT( 57), PACA_INIT( 58), PACA_INIT( 59), + PACA_INIT( 60), PACA_INIT( 61), PACA_INIT( 62), PACA_INIT( 63), +#if NR_CPUS > 64 + PACA_INIT( 64), PACA_INIT( 65), PACA_INIT( 66), PACA_INIT( 67), + PACA_INIT( 68), PACA_INIT( 69), PACA_INIT( 70), PACA_INIT( 71), + PACA_INIT( 72), PACA_INIT( 73), PACA_INIT( 74), PACA_INIT( 75), + PACA_INIT( 76), PACA_INIT( 77), PACA_INIT( 78), PACA_INIT( 79), + PACA_INIT( 80), PACA_INIT( 81), PACA_INIT( 82), PACA_INIT( 83), + PACA_INIT( 84), PACA_INIT( 85), PACA_INIT( 86), PACA_INIT( 87), + PACA_INIT( 88), PACA_INIT( 89), PACA_INIT( 90), PACA_INIT( 91), + PACA_INIT( 92), PACA_INIT( 93), PACA_INIT( 94), PACA_INIT( 95), + PACA_INIT( 96), PACA_INIT( 97), PACA_INIT( 98), PACA_INIT( 99), + PACA_INIT(100), PACA_INIT(101), PACA_INIT(102), PACA_INIT(103), + PACA_INIT(104), PACA_INIT(105), PACA_INIT(106), PACA_INIT(107), + PACA_INIT(108), PACA_INIT(109), PACA_INIT(110), PACA_INIT(111), + PACA_INIT(112), PACA_INIT(113), PACA_INIT(114), PACA_INIT(115), + PACA_INIT(116), PACA_INIT(117), PACA_INIT(118), PACA_INIT(119), + PACA_INIT(120), PACA_INIT(121), PACA_INIT(122), PACA_INIT(123), + PACA_INIT(124), PACA_INIT(125), PACA_INIT(126), PACA_INIT(127), +#endif +#endif +#endif +#endif +#endif +}; +EXPORT_SYMBOL(paca); diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index c441aebe7648..eb3187f18fb0 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -12,11 +12,10 @@ obj-y := misc.o prom.o endif obj-y += irq.o idle.o dma.o \ - align.o pacaData.o \ - udbg.o ioctl32.o \ + align.o \ + udbg.o \ rtc.o \ - cpu_setup_power4.o \ - iommu.o sysfs.o vdso.o firmware.o + iommu.o sysfs.o vdso.o obj-y += vdso32/ vdso64/ pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o @@ -52,8 +51,6 @@ obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o obj-$(CONFIG_KPROBES) += kprobes.o -CFLAGS_ioctl32.o += -Ifs/ - ifneq ($(CONFIG_PPC_MERGE),y) ifeq ($(CONFIG_PPC_ISERIES),y) arch/ppc64/kernel/head.o: arch/powerpc/kernel/lparmap.s diff --git a/arch/ppc64/kernel/cpu_setup_power4.S b/arch/ppc64/kernel/cpu_setup_power4.S deleted file mode 100644 index 1fb673c511ff..000000000000 --- a/arch/ppc64/kernel/cpu_setup_power4.S +++ /dev/null @@ -1,233 +0,0 @@ -/* - * This file contains low level CPU setup functions. - * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -_GLOBAL(__970_cpu_preinit) - /* - * Do nothing if not running in HV mode - */ - mfmsr r0 - rldicl. r0,r0,4,63 - beqlr - - /* - * Deal only with PPC970 and PPC970FX. - */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bnelr -1: - - /* Make sure HID4:rm_ci is off before MMU is turned off, that large - * pages are enabled with HID4:61 and clear HID5:DCBZ_size and - * HID5:DCBZ32_ill - */ - li r0,0 - mfspr r3,SPRN_HID4 - rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ - rldimi r3,r0,2,61 /* clear bit 61 (lg_pg_en) */ - sync - mtspr SPRN_HID4,r3 - isync - sync - mfspr r3,SPRN_HID5 - rldimi r3,r0,6,56 /* clear bits 56 & 57 (DCBZ*) */ - sync - mtspr SPRN_HID5,r3 - isync - sync - - /* Setup some basic HID1 features */ - mfspr r0,SPRN_HID1 - li r3,0x1200 /* enable i-fetch cacheability */ - sldi r3,r3,44 /* and prefetch */ - or r0,r0,r3 - mtspr SPRN_HID1,r0 - mtspr SPRN_HID1,r0 - isync - - /* Clear HIOR */ - li r0,0 - sync - mtspr SPRN_HIOR,0 /* Clear interrupt prefix */ - isync - blr - -_GLOBAL(__setup_cpu_power4) - blr - -_GLOBAL(__setup_cpu_be) - /* Set large page sizes LP=0: 16MB, LP=1: 64KB */ - addi r3, 0, 0 - ori r3, r3, HID6_LB - sldi r3, r3, 32 - nor r3, r3, r3 - mfspr r4, SPRN_HID6 - and r4, r4, r3 - addi r3, 0, 0x02000 - sldi r3, r3, 32 - or r4, r4, r3 - mtspr SPRN_HID6, r4 - blr - -_GLOBAL(__setup_cpu_ppc970) - mfspr r0,SPRN_HID0 - li r11,5 /* clear DOZE and SLEEP */ - rldimi r0,r11,52,8 /* set NAP and DPM */ - mtspr SPRN_HID0,r0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - sync - isync - blr - -/* Definitions for the table use to save CPU states */ -#define CS_HID0 0 -#define CS_HID1 8 -#define CS_HID4 16 -#define CS_HID5 24 -#define CS_SIZE 32 - - .data - .balign L1_CACHE_BYTES,0 -cpu_state_storage: - .space CS_SIZE - .balign L1_CACHE_BYTES,0 - .text - -/* Called in normal context to backup CPU 0 state. This - * does not include cache settings. This function is also - * called for machine sleep. This does not include the MMU - * setup, BATs, etc... but rather the "special" registers - * like HID0, HID1, HID4, etc... - */ -_GLOBAL(__save_cpu_setup) - /* Some CR fields are volatile, we back it up all */ - mfcr r7 - - /* Get storage ptr */ - LOADADDR(r5,cpu_state_storage) - - /* We only deal with 970 for now */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bne 2f - -1: /* Save HID0,1,4 and 5 */ - mfspr r3,SPRN_HID0 - std r3,CS_HID0(r5) - mfspr r3,SPRN_HID1 - std r3,CS_HID1(r5) - mfspr r3,SPRN_HID4 - std r3,CS_HID4(r5) - mfspr r3,SPRN_HID5 - std r3,CS_HID5(r5) - -2: - mtcr r7 - blr - -/* Called with no MMU context (typically MSR:IR/DR off) to - * restore CPU state as backed up by the previous - * function. This does not include cache setting - */ -_GLOBAL(__restore_cpu_setup) - /* Get storage ptr (FIXME when using anton reloc as we - * are running with translation disabled here - */ - LOADADDR(r5,cpu_state_storage) - - /* We only deal with 970 for now */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bnelr - -1: /* Before accessing memory, we make sure rm_ci is clear */ - li r0,0 - mfspr r3,SPRN_HID4 - rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ - sync - mtspr SPRN_HID4,r3 - isync - sync - - /* Clear interrupt prefix */ - li r0,0 - sync - mtspr SPRN_HIOR,0 - isync - - /* Restore HID0 */ - ld r3,CS_HID0(r5) - sync - isync - mtspr SPRN_HID0,r3 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - sync - isync - - /* Restore HID1 */ - ld r3,CS_HID1(r5) - sync - isync - mtspr SPRN_HID1,r3 - mtspr SPRN_HID1,r3 - sync - isync - - /* Restore HID4 */ - ld r3,CS_HID4(r5) - sync - isync - mtspr SPRN_HID4,r3 - sync - isync - - /* Restore HID5 */ - ld r3,CS_HID5(r5) - sync - isync - mtspr SPRN_HID5,r3 - sync - isync - blr - diff --git a/arch/ppc64/kernel/firmware.c b/arch/ppc64/kernel/firmware.c deleted file mode 100644 index d8432c0fb27d..000000000000 --- a/arch/ppc64/kernel/firmware.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/ppc64/kernel/firmware.c - * - * Extracted from cputable.c - * - * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * Modifications for ppc64: - * Copyright (C) 2003 Dave Engebretsen - * Copyright (C) 2005 Stephen Rothwell, IBM Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include - -#include - -unsigned long ppc64_firmware_features; - -#ifdef CONFIG_PPC_PSERIES -firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = { - {FW_FEATURE_PFT, "hcall-pft"}, - {FW_FEATURE_TCE, "hcall-tce"}, - {FW_FEATURE_SPRG0, "hcall-sprg0"}, - {FW_FEATURE_DABR, "hcall-dabr"}, - {FW_FEATURE_COPY, "hcall-copy"}, - {FW_FEATURE_ASR, "hcall-asr"}, - {FW_FEATURE_DEBUG, "hcall-debug"}, - {FW_FEATURE_PERF, "hcall-perf"}, - {FW_FEATURE_DUMP, "hcall-dump"}, - {FW_FEATURE_INTERRUPT, "hcall-interrupt"}, - {FW_FEATURE_MIGRATE, "hcall-migrate"}, - {FW_FEATURE_PERFMON, "hcall-perfmon"}, - {FW_FEATURE_CRQ, "hcall-crq"}, - {FW_FEATURE_VIO, "hcall-vio"}, - {FW_FEATURE_RDMA, "hcall-rdma"}, - {FW_FEATURE_LLAN, "hcall-lLAN"}, - {FW_FEATURE_BULK, "hcall-bulk"}, - {FW_FEATURE_XDABR, "hcall-xdabr"}, - {FW_FEATURE_MULTITCE, "hcall-multi-tce"}, - {FW_FEATURE_SPLPAR, "hcall-splpar"}, -}; -#endif diff --git a/arch/ppc64/kernel/ioctl32.c b/arch/ppc64/kernel/ioctl32.c deleted file mode 100644 index ba4a899045c2..000000000000 --- a/arch/ppc64/kernel/ioctl32.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * ioctl32.c: Conversion between 32bit and 64bit native ioctls. - * - * Based on sparc64 ioctl32.c by: - * - * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com) - * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) - * - * ppc64 changes: - * - * Copyright (C) 2000 Ken Aaker (kdaaker@rchland.vnet.ibm.com) - * Copyright (C) 2001 Anton Blanchard (antonb@au.ibm.com) - * - * These routines maintain argument size conversion between 32bit and 64bit - * ioctls. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define INCLUDES -#include "compat_ioctl.c" -#include - -#define CODE -#include "compat_ioctl.c" - -#define HANDLE_IOCTL(cmd,handler) { cmd, (ioctl_trans_handler_t)handler, NULL }, -#define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd,sys_ioctl) - -#define IOCTL_TABLE_START \ - struct ioctl_trans ioctl_start[] = { -#define IOCTL_TABLE_END \ - }; - -IOCTL_TABLE_START -#include -#define DECLARES -#include "compat_ioctl.c" - -/* Little p (/dev/rtc, /dev/envctrl, etc.) */ -COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */ -COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */ - -IOCTL_TABLE_END - -int ioctl_table_size = ARRAY_SIZE(ioctl_start); diff --git a/arch/ppc64/kernel/pacaData.c b/arch/ppc64/kernel/pacaData.c deleted file mode 100644 index 3133c72b28ec..000000000000 --- a/arch/ppc64/kernel/pacaData.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -static union { - struct systemcfg data; - u8 page[PAGE_SIZE]; -} systemcfg_store __attribute__((__section__(".data.page.aligned"))); -struct systemcfg *systemcfg = &systemcfg_store.data; -EXPORT_SYMBOL(systemcfg); - - -/* This symbol is provided by the linker - let it fill in the paca - * field correctly */ -extern unsigned long __toc_start; - -/* The Paca is an array with one entry per processor. Each contains an - * lppaca, which contains the information shared between the - * hypervisor and Linux. Each also contains an ItLpRegSave area which - * is used by the hypervisor to save registers. - * On systems with hardware multi-threading, there are two threads - * per processor. The Paca array must contain an entry for each thread. - * The VPD Areas will give a max logical processors = 2 * max physical - * processors. The processor VPD array needs one entry per physical - * processor (not thread). - */ -#define PACA_INIT_COMMON(number, start, asrr, asrv) \ - .lock_token = 0x8000, \ - .paca_index = (number), /* Paca Index */ \ - .default_decr = 0x00ff0000, /* Initial Decr */ \ - .kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \ - .stab_real = (asrr), /* Real pointer to segment table */ \ - .stab_addr = (asrv), /* Virt pointer to segment table */ \ - .cpu_start = (start), /* Processor start */ \ - .hw_cpu_id = 0xffff, \ - .lppaca = { \ - .desc = 0xd397d781, /* "LpPa" */ \ - .size = sizeof(struct lppaca), \ - .dyn_proc_status = 2, \ - .decr_val = 0x00ff0000, \ - .fpregs_in_use = 1, \ - .end_of_quantum = 0xfffffffffffffffful, \ - .slb_count = 64, \ - .vmxregs_in_use = 0, \ - }, \ - -#ifdef CONFIG_PPC_ISERIES -#define PACA_INIT_ISERIES(number) \ - .lppaca_ptr = &paca[number].lppaca, \ - .reg_save_ptr = &paca[number].reg_save, \ - .reg_save = { \ - .xDesc = 0xd397d9e2, /* "LpRS" */ \ - .xSize = sizeof(struct ItLpRegSave) \ - } - -#define PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 0, 0, 0) \ - PACA_INIT_ISERIES(number) \ -} - -#define BOOTCPU_PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 1, 0, (u64)&initial_stab) \ - PACA_INIT_ISERIES(number) \ -} - -#else -#define PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 0, 0, 0) \ -} - -#define BOOTCPU_PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, (u64)&initial_stab) \ -} -#endif - -struct paca_struct paca[] = { - BOOTCPU_PACA_INIT(0), -#if NR_CPUS > 1 - PACA_INIT( 1), PACA_INIT( 2), PACA_INIT( 3), -#if NR_CPUS > 4 - PACA_INIT( 4), PACA_INIT( 5), PACA_INIT( 6), PACA_INIT( 7), -#if NR_CPUS > 8 - PACA_INIT( 8), PACA_INIT( 9), PACA_INIT( 10), PACA_INIT( 11), - PACA_INIT( 12), PACA_INIT( 13), PACA_INIT( 14), PACA_INIT( 15), - PACA_INIT( 16), PACA_INIT( 17), PACA_INIT( 18), PACA_INIT( 19), - PACA_INIT( 20), PACA_INIT( 21), PACA_INIT( 22), PACA_INIT( 23), - PACA_INIT( 24), PACA_INIT( 25), PACA_INIT( 26), PACA_INIT( 27), - PACA_INIT( 28), PACA_INIT( 29), PACA_INIT( 30), PACA_INIT( 31), -#if NR_CPUS > 32 - PACA_INIT( 32), PACA_INIT( 33), PACA_INIT( 34), PACA_INIT( 35), - PACA_INIT( 36), PACA_INIT( 37), PACA_INIT( 38), PACA_INIT( 39), - PACA_INIT( 40), PACA_INIT( 41), PACA_INIT( 42), PACA_INIT( 43), - PACA_INIT( 44), PACA_INIT( 45), PACA_INIT( 46), PACA_INIT( 47), - PACA_INIT( 48), PACA_INIT( 49), PACA_INIT( 50), PACA_INIT( 51), - PACA_INIT( 52), PACA_INIT( 53), PACA_INIT( 54), PACA_INIT( 55), - PACA_INIT( 56), PACA_INIT( 57), PACA_INIT( 58), PACA_INIT( 59), - PACA_INIT( 60), PACA_INIT( 61), PACA_INIT( 62), PACA_INIT( 63), -#if NR_CPUS > 64 - PACA_INIT( 64), PACA_INIT( 65), PACA_INIT( 66), PACA_INIT( 67), - PACA_INIT( 68), PACA_INIT( 69), PACA_INIT( 70), PACA_INIT( 71), - PACA_INIT( 72), PACA_INIT( 73), PACA_INIT( 74), PACA_INIT( 75), - PACA_INIT( 76), PACA_INIT( 77), PACA_INIT( 78), PACA_INIT( 79), - PACA_INIT( 80), PACA_INIT( 81), PACA_INIT( 82), PACA_INIT( 83), - PACA_INIT( 84), PACA_INIT( 85), PACA_INIT( 86), PACA_INIT( 87), - PACA_INIT( 88), PACA_INIT( 89), PACA_INIT( 90), PACA_INIT( 91), - PACA_INIT( 92), PACA_INIT( 93), PACA_INIT( 94), PACA_INIT( 95), - PACA_INIT( 96), PACA_INIT( 97), PACA_INIT( 98), PACA_INIT( 99), - PACA_INIT(100), PACA_INIT(101), PACA_INIT(102), PACA_INIT(103), - PACA_INIT(104), PACA_INIT(105), PACA_INIT(106), PACA_INIT(107), - PACA_INIT(108), PACA_INIT(109), PACA_INIT(110), PACA_INIT(111), - PACA_INIT(112), PACA_INIT(113), PACA_INIT(114), PACA_INIT(115), - PACA_INIT(116), PACA_INIT(117), PACA_INIT(118), PACA_INIT(119), - PACA_INIT(120), PACA_INIT(121), PACA_INIT(122), PACA_INIT(123), - PACA_INIT(124), PACA_INIT(125), PACA_INIT(126), PACA_INIT(127), -#endif -#endif -#endif -#endif -#endif -}; -EXPORT_SYMBOL(paca); diff --git a/include/asm-powerpc/abs_addr.h b/include/asm-powerpc/abs_addr.h new file mode 100644 index 000000000000..18415108fc56 --- /dev/null +++ b/include/asm-powerpc/abs_addr.h @@ -0,0 +1,73 @@ +#ifndef _ASM_POWERPC_ABS_ADDR_H +#define _ASM_POWERPC_ABS_ADDR_H + +#include + +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +struct mschunks_map { + unsigned long num_chunks; + unsigned long chunk_size; + unsigned long chunk_shift; + unsigned long chunk_mask; + u32 *mapping; +}; + +extern struct mschunks_map mschunks_map; + +/* Chunks are 256 KB */ +#define MSCHUNKS_CHUNK_SHIFT (18) +#define MSCHUNKS_CHUNK_SIZE (1UL << MSCHUNKS_CHUNK_SHIFT) +#define MSCHUNKS_OFFSET_MASK (MSCHUNKS_CHUNK_SIZE - 1) + +static inline unsigned long chunk_to_addr(unsigned long chunk) +{ + return chunk << MSCHUNKS_CHUNK_SHIFT; +} + +static inline unsigned long addr_to_chunk(unsigned long addr) +{ + return addr >> MSCHUNKS_CHUNK_SHIFT; +} + +static inline unsigned long phys_to_abs(unsigned long pa) +{ + unsigned long chunk; + + /* This is a no-op on non-iSeries */ + if (!firmware_has_feature(FW_FEATURE_ISERIES)) + return pa; + + chunk = addr_to_chunk(pa); + + if (chunk < mschunks_map.num_chunks) + chunk = mschunks_map.mapping[chunk]; + + return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK); +} + +/* Convenience macros */ +#define virt_to_abs(va) phys_to_abs(__pa(va)) +#define abs_to_virt(aa) __va(aa) + +/* + * Converts Virtual Address to Real Address for + * Legacy iSeries Hypervisor calls + */ +#define iseries_hv_addr(virtaddr) \ + (0x8000000000000000 | virt_to_abs(virtaddr)) + +#endif /* _ASM_POWERPC_ABS_ADDR_H */ diff --git a/include/asm-powerpc/compat.h b/include/asm-powerpc/compat.h new file mode 100644 index 000000000000..4db4360c4d4a --- /dev/null +++ b/include/asm-powerpc/compat.h @@ -0,0 +1,205 @@ +#ifndef _ASM_POWERPC_COMPAT_H +#define _ASM_POWERPC_COMPAT_H +/* + * Architecture specific compatibility types + */ +#include +#include + +#define COMPAT_USER_HZ 100 + +typedef u32 compat_size_t; +typedef s32 compat_ssize_t; +typedef s32 compat_time_t; +typedef s32 compat_clock_t; +typedef s32 compat_pid_t; +typedef u32 __compat_uid_t; +typedef u32 __compat_gid_t; +typedef u32 __compat_uid32_t; +typedef u32 __compat_gid32_t; +typedef u32 compat_mode_t; +typedef u32 compat_ino_t; +typedef u32 compat_dev_t; +typedef s32 compat_off_t; +typedef s64 compat_loff_t; +typedef s16 compat_nlink_t; +typedef u16 compat_ipc_pid_t; +typedef s32 compat_daddr_t; +typedef u32 compat_caddr_t; +typedef __kernel_fsid_t compat_fsid_t; +typedef s32 compat_key_t; +typedef s32 compat_timer_t; + +typedef s32 compat_int_t; +typedef s32 compat_long_t; +typedef u32 compat_uint_t; +typedef u32 compat_ulong_t; + +struct compat_timespec { + compat_time_t tv_sec; + s32 tv_nsec; +}; + +struct compat_timeval { + compat_time_t tv_sec; + s32 tv_usec; +}; + +struct compat_stat { + compat_dev_t st_dev; + compat_ino_t st_ino; + compat_mode_t st_mode; + compat_nlink_t st_nlink; + __compat_uid32_t st_uid; + __compat_gid32_t st_gid; + compat_dev_t st_rdev; + compat_off_t st_size; + compat_off_t st_blksize; + compat_off_t st_blocks; + compat_time_t st_atime; + u32 st_atime_nsec; + compat_time_t st_mtime; + u32 st_mtime_nsec; + compat_time_t st_ctime; + u32 st_ctime_nsec; + u32 __unused4[2]; +}; + +struct compat_flock { + short l_type; + short l_whence; + compat_off_t l_start; + compat_off_t l_len; + compat_pid_t l_pid; +}; + +#define F_GETLK64 12 /* using 'struct flock64' */ +#define F_SETLK64 13 +#define F_SETLKW64 14 + +struct compat_flock64 { + short l_type; + short l_whence; + compat_loff_t l_start; + compat_loff_t l_len; + compat_pid_t l_pid; +}; + +struct compat_statfs { + int f_type; + int f_bsize; + int f_blocks; + int f_bfree; + int f_bavail; + int f_files; + int f_ffree; + compat_fsid_t f_fsid; + int f_namelen; /* SunOS ignores this field. */ + int f_frsize; + int f_spare[5]; +}; + +#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff +#define COMPAT_RLIM_INFINITY 0xffffffff + +typedef u32 compat_old_sigset_t; + +#define _COMPAT_NSIG 64 +#define _COMPAT_NSIG_BPW 32 + +typedef u32 compat_sigset_word; + +#define COMPAT_OFF_T_MAX 0x7fffffff +#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL + +/* + * A pointer passed in from user mode. This should not + * be used for syscall parameters, just declare them + * as pointers because the syscall entry code will have + * appropriately comverted them already. + */ +typedef u32 compat_uptr_t; + +static inline void __user *compat_ptr(compat_uptr_t uptr) +{ + return (void __user *)(unsigned long)uptr; +} + +static inline void __user *compat_alloc_user_space(long len) +{ + struct pt_regs *regs = current->thread.regs; + unsigned long usp = regs->gpr[1]; + + /* + * We cant access below the stack pointer in the 32bit ABI and + * can access 288 bytes in the 64bit ABI + */ + if (!(test_thread_flag(TIF_32BIT))) + usp -= 288; + + return (void __user *) (usp - len); +} + +/* + * ipc64_perm is actually 32/64bit clean but since the compat layer refers to + * it we may as well define it. + */ +struct compat_ipc64_perm { + compat_key_t key; + __compat_uid_t uid; + __compat_gid_t gid; + __compat_uid_t cuid; + __compat_gid_t cgid; + compat_mode_t mode; + unsigned int seq; + unsigned int __pad2; + unsigned long __unused1; /* yes they really are 64bit pads */ + unsigned long __unused2; +}; + +struct compat_semid64_ds { + struct compat_ipc64_perm sem_perm; + unsigned int __unused1; + compat_time_t sem_otime; + unsigned int __unused2; + compat_time_t sem_ctime; + compat_ulong_t sem_nsems; + compat_ulong_t __unused3; + compat_ulong_t __unused4; +}; + +struct compat_msqid64_ds { + struct compat_ipc64_perm msg_perm; + unsigned int __unused1; + compat_time_t msg_stime; + unsigned int __unused2; + compat_time_t msg_rtime; + unsigned int __unused3; + compat_time_t msg_ctime; + compat_ulong_t msg_cbytes; + compat_ulong_t msg_qnum; + compat_ulong_t msg_qbytes; + compat_pid_t msg_lspid; + compat_pid_t msg_lrpid; + compat_ulong_t __unused4; + compat_ulong_t __unused5; +}; + +struct compat_shmid64_ds { + struct compat_ipc64_perm shm_perm; + unsigned int __unused1; + compat_time_t shm_atime; + unsigned int __unused2; + compat_time_t shm_dtime; + unsigned int __unused3; + compat_time_t shm_ctime; + unsigned int __unused4; + compat_size_t shm_segsz; + compat_pid_t shm_cpid; + compat_pid_t shm_lpid; + compat_ulong_t shm_nattch; + compat_ulong_t __unused5; + compat_ulong_t __unused6; +}; + +#endif /* _ASM_POWERPC_COMPAT_H */ diff --git a/include/asm-powerpc/lppaca.h b/include/asm-powerpc/lppaca.h new file mode 100644 index 000000000000..c1bedab1515b --- /dev/null +++ b/include/asm-powerpc/lppaca.h @@ -0,0 +1,131 @@ +/* + * lppaca.h + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_LPPACA_H +#define _ASM_POWERPC_LPPACA_H + +//============================================================================= +// +// This control block contains the data that is shared between the +// hypervisor (PLIC) and the OS. +// +// +//---------------------------------------------------------------------------- +#include + +struct lppaca { +//============================================================================= +// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data +// NOTE: The xDynXyz fields are fields that will be dynamically changed by +// PLIC when preparing to bring a processor online or when dispatching a +// virtual processor! +//============================================================================= + u32 desc; // Eye catcher 0xD397D781 x00-x03 + u16 size; // Size of this struct x04-x05 + u16 reserved1; // Reserved x06-x07 + u16 reserved2:14; // Reserved x08-x09 + u8 shared_proc:1; // Shared processor indicator ... + u8 secondary_thread:1; // Secondary thread indicator ... + volatile u8 dyn_proc_status:8; // Dynamic Status of this proc x0A-x0A + u8 secondary_thread_count; // Secondary thread count x0B-x0B + volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D + volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F + u32 decr_val; // Value for Decr programming x10-x13 + u32 pmc_val; // Value for PMC regs x14-x17 + volatile u32 dyn_hw_node_id; // Dynamic Hardware Node id x18-x1B + volatile u32 dyn_hw_proc_id; // Dynamic Hardware Proc Id x1C-x1F + volatile u32 dyn_pir; // Dynamic ProcIdReg value x20-x23 + u32 dsei_data; // DSEI data x24-x27 + u64 sprg3; // SPRG3 value x28-x2F + u8 reserved3[80]; // Reserved x30-x7F + +//============================================================================= +// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data +//============================================================================= + // This Dword contains a byte for each type of interrupt that can occur. + // The IPI is a count while the others are just a binary 1 or 0. + union { + u64 any_int; + struct { + u16 reserved; // Reserved - cleared by #mpasmbl + u8 xirr_int; // Indicates xXirrValue is valid or Immed IO + u8 ipi_cnt; // IPI Count + u8 decr_int; // DECR interrupt occurred + u8 pdc_int; // PDC interrupt occurred + u8 quantum_int; // Interrupt quantum reached + u8 old_plic_deferred_ext_int; // Old PLIC has a deferred XIRR pending + } fields; + } int_dword; + + // Whenever any fields in this Dword are set then PLIC will defer the + // processing of external interrupts. Note that PLIC will store the + // XIRR directly into the xXirrValue field so that another XIRR will + // not be presented until this one clears. The layout of the low + // 4-bytes of this Dword is upto SLIC - PLIC just checks whether the + // entire Dword is zero or not. A non-zero value in the low order + // 2-bytes will result in SLIC being granted the highest thread + // priority upon return. A 0 will return to SLIC as medium priority. + u64 plic_defer_ints_area; // Entire Dword + + // Used to pass the real SRR0/1 from PLIC to SLIC as well as to + // pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid. + u64 saved_srr0; // Saved SRR0 x10-x17 + u64 saved_srr1; // Saved SRR1 x18-x1F + + // Used to pass parms from the OS to PLIC for SetAsrAndRfid + u64 saved_gpr3; // Saved GPR3 x20-x27 + u64 saved_gpr4; // Saved GPR4 x28-x2F + u64 saved_gpr5; // Saved GPR5 x30-x37 + + u8 reserved4; // Reserved x38-x38 + u8 cpuctls_task_attrs; // Task attributes for cpuctls x39-x39 + u8 fpregs_in_use; // FP regs in use x3A-x3A + u8 pmcregs_in_use; // PMC regs in use x3B-x3B + volatile u32 saved_decr; // Saved Decr Value x3C-x3F + volatile u64 emulated_time_base;// Emulated TB for this thread x40-x47 + volatile u64 cur_plic_latency; // Unaccounted PLIC latency x48-x4F + u64 tot_plic_latency; // Accumulated PLIC latency x50-x57 + u64 wait_state_cycles; // Wait cycles for this proc x58-x5F + u64 end_of_quantum; // TB at end of quantum x60-x67 + u64 pdc_saved_sprg1; // Saved SPRG1 for PMC int x68-x6F + u64 pdc_saved_srr0; // Saved SRR0 for PMC int x70-x77 + volatile u32 virtual_decr; // Virtual DECR for shared procsx78-x7B + u16 slb_count; // # of SLBs to maintain x7C-x7D + u8 idle; // Indicate OS is idle x7E + u8 vmxregs_in_use; // VMX registers in use x7F + + +//============================================================================= +// CACHE_LINE_3 0x0100 - 0x007F: This line is shared with other processors +//============================================================================= + // This is the yield_count. An "odd" value (low bit on) means that + // the processor is yielded (either because of an OS yield or a PLIC + // preempt). An even value implies that the processor is currently + // executing. + // NOTE: This value will ALWAYS be zero for dedicated processors and + // will NEVER be zero for shared processors (ie, initialized to a 1). + volatile u32 yield_count; // PLIC increments each dispatchx00-x03 + u8 reserved6[124]; // Reserved x04-x7F + +//============================================================================= +// CACHE_LINE_4-5 0x0100 - 0x01FF Contains PMC interrupt data +//============================================================================= + u8 pmc_save_area[256]; // PMC interrupt Area x00-xFF +}; + +#endif /* _ASM_POWERPC_LPPACA_H */ diff --git a/include/asm-powerpc/paca.h b/include/asm-powerpc/paca.h new file mode 100644 index 000000000000..92c765c35bd0 --- /dev/null +++ b/include/asm-powerpc/paca.h @@ -0,0 +1,120 @@ +/* + * include/asm-powerpc/paca.h + * + * This control block defines the PACA which defines the processor + * specific data for each logical processor on the system. + * There are some pointers defined that are utilized by PLIC. + * + * C 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_PACA_H +#define _ASM_POWERPC_PACA_H + +#include +#include +#include +#include +#include + +register struct paca_struct *local_paca asm("r13"); +#define get_paca() local_paca + +struct task_struct; + +/* + * Defines the layout of the paca. + * + * This structure is not directly accessed by firmware or the service + * processor except for the first two pointers that point to the + * lppaca area and the ItLpRegSave area for this CPU. Both the + * lppaca and ItLpRegSave objects are currently contained within the + * PACA but they do not need to be. + */ +struct paca_struct { + /* + * Because hw_cpu_id, unlike other paca fields, is accessed + * routinely from other CPUs (from the IRQ code), we stick to + * read-only (after boot) fields in the first cacheline to + * avoid cacheline bouncing. + */ + + /* + * MAGIC: These first two pointers can't be moved - they're + * accessed by the firmware + */ + struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ + struct ItLpRegSave *reg_save_ptr; /* Pointer to LpRegSave for PLIC */ + + /* + * MAGIC: the spinlock functions in arch/ppc64/lib/locks.c + * load lock_token and paca_index with a single lwz + * instruction. They must travel together and be properly + * aligned. + */ + u16 lock_token; /* Constant 0x8000, used in locks */ + u16 paca_index; /* Logical processor number */ + + u32 default_decr; /* Default decrementer value */ + u64 kernel_toc; /* Kernel TOC address */ + u64 stab_real; /* Absolute address of segment table */ + u64 stab_addr; /* Virtual address of segment table */ + void *emergency_sp; /* pointer to emergency stack */ + s16 hw_cpu_id; /* Physical processor number */ + u8 cpu_start; /* At startup, processor spins until */ + /* this becomes non-zero. */ + + /* + * Now, starting in cacheline 2, the exception save areas + */ + /* used for most interrupts/exceptions */ + u64 exgen[10] __attribute__((aligned(0x80))); + u64 exmc[10]; /* used for machine checks */ + u64 exslb[10]; /* used for SLB/segment table misses + * on the linear mapping */ +#ifdef CONFIG_PPC_64K_PAGES + pgd_t *pgdir; +#endif /* CONFIG_PPC_64K_PAGES */ + + mm_context_t context; + u16 slb_cache[SLB_CACHE_ENTRIES]; + u16 slb_cache_ptr; + + /* + * then miscellaneous read-write fields + */ + struct task_struct *__current; /* Pointer to current */ + u64 kstack; /* Saved Kernel stack addr */ + u64 stab_rr; /* stab/slb round-robin counter */ + u64 next_jiffy_update_tb; /* TB value for next jiffy update */ + u64 saved_r1; /* r1 save for RTAS calls */ + u64 saved_msr; /* MSR saved here by enter_rtas */ + u8 proc_enabled; /* irq soft-enable flag */ + + /* not yet used */ + u64 exdsi[8]; /* used for linear mapping hash table misses */ + + /* + * iSeries structure which the hypervisor knows about - + * this structure should not cross a page boundary. + * The vpa_init/register_vpa call is now known to fail if the + * lppaca structure crosses a page boundary. + * The lppaca is also used on POWER5 pSeries boxes. + * The lppaca is 640 bytes long, and cannot readily change + * since the hypervisor knows its layout, so a 1kB + * alignment will suffice to ensure that it doesn't + * cross a page boundary. + */ + struct lppaca lppaca __attribute__((__aligned__(0x400))); +#ifdef CONFIG_PPC_ISERIES + struct ItLpRegSave reg_save; +#endif +}; + +extern struct paca_struct paca[]; + +#endif /* _ASM_POWERPC_PACA_H */ diff --git a/include/asm-powerpc/tce.h b/include/asm-powerpc/tce.h new file mode 100644 index 000000000000..d099d5200f9b --- /dev/null +++ b/include/asm-powerpc/tce.h @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation + * Rewrite, cleanup: + * Copyright (C) 2004 Olof Johansson , IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_TCE_H +#define _ASM_POWERPC_TCE_H + +/* + * Tces come in two formats, one for the virtual bus and a different + * format for PCI + */ +#define TCE_VB 0 +#define TCE_PCI 1 + +/* TCE page size is 4096 bytes (1 << 12) */ + +#define TCE_SHIFT 12 +#define TCE_PAGE_SIZE (1 << TCE_SHIFT) +#define TCE_PAGE_FACTOR (PAGE_SHIFT - TCE_SHIFT) + + +/* tce_entry + * Used by pSeries (SMP) and iSeries/pSeries LPAR, but there it's + * abstracted so layout is irrelevant. + */ +union tce_entry { + unsigned long te_word; + struct { + unsigned int tb_cacheBits :6; /* Cache hash bits - not used */ + unsigned int tb_rsvd :6; + unsigned long tb_rpn :40; /* Real page number */ + unsigned int tb_valid :1; /* Tce is valid (vb only) */ + unsigned int tb_allio :1; /* Tce is valid for all lps (vb only) */ + unsigned int tb_lpindex :8; /* LpIndex for user of TCE (vb only) */ + unsigned int tb_pciwr :1; /* Write allowed (pci only) */ + unsigned int tb_rdwr :1; /* Read allowed (pci), Write allowed (vb) */ + } te_bits; +#define te_cacheBits te_bits.tb_cacheBits +#define te_rpn te_bits.tb_rpn +#define te_valid te_bits.tb_valid +#define te_allio te_bits.tb_allio +#define te_lpindex te_bits.tb_lpindex +#define te_pciwr te_bits.tb_pciwr +#define te_rdwr te_bits.tb_rdwr +}; + + +#endif /* _ASM_POWERPC_TCE_H */ diff --git a/include/asm-ppc64/abs_addr.h b/include/asm-ppc64/abs_addr.h deleted file mode 100644 index dc3fc3fefef2..000000000000 --- a/include/asm-ppc64/abs_addr.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef _ABS_ADDR_H -#define _ABS_ADDR_H - -#include - -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include - -struct mschunks_map { - unsigned long num_chunks; - unsigned long chunk_size; - unsigned long chunk_shift; - unsigned long chunk_mask; - u32 *mapping; -}; - -extern struct mschunks_map mschunks_map; - -/* Chunks are 256 KB */ -#define MSCHUNKS_CHUNK_SHIFT (18) -#define MSCHUNKS_CHUNK_SIZE (1UL << MSCHUNKS_CHUNK_SHIFT) -#define MSCHUNKS_OFFSET_MASK (MSCHUNKS_CHUNK_SIZE - 1) - -static inline unsigned long chunk_to_addr(unsigned long chunk) -{ - return chunk << MSCHUNKS_CHUNK_SHIFT; -} - -static inline unsigned long addr_to_chunk(unsigned long addr) -{ - return addr >> MSCHUNKS_CHUNK_SHIFT; -} - -static inline unsigned long phys_to_abs(unsigned long pa) -{ - unsigned long chunk; - - /* This is a no-op on non-iSeries */ - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return pa; - - chunk = addr_to_chunk(pa); - - if (chunk < mschunks_map.num_chunks) - chunk = mschunks_map.mapping[chunk]; - - return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK); -} - -/* Convenience macros */ -#define virt_to_abs(va) phys_to_abs(__pa(va)) -#define abs_to_virt(aa) __va(aa) - -/* - * Converts Virtual Address to Real Address for - * Legacy iSeries Hypervisor calls - */ -#define iseries_hv_addr(virtaddr) \ - (0x8000000000000000 | virt_to_abs(virtaddr)) - -#endif /* _ABS_ADDR_H */ diff --git a/include/asm-ppc64/compat.h b/include/asm-ppc64/compat.h deleted file mode 100644 index 6ec62cd2d1d1..000000000000 --- a/include/asm-ppc64/compat.h +++ /dev/null @@ -1,205 +0,0 @@ -#ifndef _ASM_PPC64_COMPAT_H -#define _ASM_PPC64_COMPAT_H -/* - * Architecture specific compatibility types - */ -#include -#include - -#define COMPAT_USER_HZ 100 - -typedef u32 compat_size_t; -typedef s32 compat_ssize_t; -typedef s32 compat_time_t; -typedef s32 compat_clock_t; -typedef s32 compat_pid_t; -typedef u32 __compat_uid_t; -typedef u32 __compat_gid_t; -typedef u32 __compat_uid32_t; -typedef u32 __compat_gid32_t; -typedef u32 compat_mode_t; -typedef u32 compat_ino_t; -typedef u32 compat_dev_t; -typedef s32 compat_off_t; -typedef s64 compat_loff_t; -typedef s16 compat_nlink_t; -typedef u16 compat_ipc_pid_t; -typedef s32 compat_daddr_t; -typedef u32 compat_caddr_t; -typedef __kernel_fsid_t compat_fsid_t; -typedef s32 compat_key_t; -typedef s32 compat_timer_t; - -typedef s32 compat_int_t; -typedef s32 compat_long_t; -typedef u32 compat_uint_t; -typedef u32 compat_ulong_t; - -struct compat_timespec { - compat_time_t tv_sec; - s32 tv_nsec; -}; - -struct compat_timeval { - compat_time_t tv_sec; - s32 tv_usec; -}; - -struct compat_stat { - compat_dev_t st_dev; - compat_ino_t st_ino; - compat_mode_t st_mode; - compat_nlink_t st_nlink; - __compat_uid32_t st_uid; - __compat_gid32_t st_gid; - compat_dev_t st_rdev; - compat_off_t st_size; - compat_off_t st_blksize; - compat_off_t st_blocks; - compat_time_t st_atime; - u32 st_atime_nsec; - compat_time_t st_mtime; - u32 st_mtime_nsec; - compat_time_t st_ctime; - u32 st_ctime_nsec; - u32 __unused4[2]; -}; - -struct compat_flock { - short l_type; - short l_whence; - compat_off_t l_start; - compat_off_t l_len; - compat_pid_t l_pid; -}; - -#define F_GETLK64 12 /* using 'struct flock64' */ -#define F_SETLK64 13 -#define F_SETLKW64 14 - -struct compat_flock64 { - short l_type; - short l_whence; - compat_loff_t l_start; - compat_loff_t l_len; - compat_pid_t l_pid; -}; - -struct compat_statfs { - int f_type; - int f_bsize; - int f_blocks; - int f_bfree; - int f_bavail; - int f_files; - int f_ffree; - compat_fsid_t f_fsid; - int f_namelen; /* SunOS ignores this field. */ - int f_frsize; - int f_spare[5]; -}; - -#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff -#define COMPAT_RLIM_INFINITY 0xffffffff - -typedef u32 compat_old_sigset_t; - -#define _COMPAT_NSIG 64 -#define _COMPAT_NSIG_BPW 32 - -typedef u32 compat_sigset_word; - -#define COMPAT_OFF_T_MAX 0x7fffffff -#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL - -/* - * A pointer passed in from user mode. This should not - * be used for syscall parameters, just declare them - * as pointers because the syscall entry code will have - * appropriately comverted them already. - */ -typedef u32 compat_uptr_t; - -static inline void __user *compat_ptr(compat_uptr_t uptr) -{ - return (void __user *)(unsigned long)uptr; -} - -static inline void __user *compat_alloc_user_space(long len) -{ - struct pt_regs *regs = current->thread.regs; - unsigned long usp = regs->gpr[1]; - - /* - * We cant access below the stack pointer in the 32bit ABI and - * can access 288 bytes in the 64bit ABI - */ - if (!(test_thread_flag(TIF_32BIT))) - usp -= 288; - - return (void __user *) (usp - len); -} - -/* - * ipc64_perm is actually 32/64bit clean but since the compat layer refers to - * it we may as well define it. - */ -struct compat_ipc64_perm { - compat_key_t key; - __compat_uid_t uid; - __compat_gid_t gid; - __compat_uid_t cuid; - __compat_gid_t cgid; - compat_mode_t mode; - unsigned int seq; - unsigned int __pad2; - unsigned long __unused1; /* yes they really are 64bit pads */ - unsigned long __unused2; -}; - -struct compat_semid64_ds { - struct compat_ipc64_perm sem_perm; - unsigned int __unused1; - compat_time_t sem_otime; - unsigned int __unused2; - compat_time_t sem_ctime; - compat_ulong_t sem_nsems; - compat_ulong_t __unused3; - compat_ulong_t __unused4; -}; - -struct compat_msqid64_ds { - struct compat_ipc64_perm msg_perm; - unsigned int __unused1; - compat_time_t msg_stime; - unsigned int __unused2; - compat_time_t msg_rtime; - unsigned int __unused3; - compat_time_t msg_ctime; - compat_ulong_t msg_cbytes; - compat_ulong_t msg_qnum; - compat_ulong_t msg_qbytes; - compat_pid_t msg_lspid; - compat_pid_t msg_lrpid; - compat_ulong_t __unused4; - compat_ulong_t __unused5; -}; - -struct compat_shmid64_ds { - struct compat_ipc64_perm shm_perm; - unsigned int __unused1; - compat_time_t shm_atime; - unsigned int __unused2; - compat_time_t shm_dtime; - unsigned int __unused3; - compat_time_t shm_ctime; - unsigned int __unused4; - compat_size_t shm_segsz; - compat_pid_t shm_cpid; - compat_pid_t shm_lpid; - compat_ulong_t shm_nattch; - compat_ulong_t __unused5; - compat_ulong_t __unused6; -}; - -#endif /* _ASM_PPC64_COMPAT_H */ diff --git a/include/asm-ppc64/lppaca.h b/include/asm-ppc64/lppaca.h deleted file mode 100644 index 9e2a6c0649a0..000000000000 --- a/include/asm-ppc64/lppaca.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * lppaca.h - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_LPPACA_H -#define _ASM_LPPACA_H - -//============================================================================= -// -// This control block contains the data that is shared between the -// hypervisor (PLIC) and the OS. -// -// -//---------------------------------------------------------------------------- -#include - -struct lppaca -{ -//============================================================================= -// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data -// NOTE: The xDynXyz fields are fields that will be dynamically changed by -// PLIC when preparing to bring a processor online or when dispatching a -// virtual processor! -//============================================================================= - u32 desc; // Eye catcher 0xD397D781 x00-x03 - u16 size; // Size of this struct x04-x05 - u16 reserved1; // Reserved x06-x07 - u16 reserved2:14; // Reserved x08-x09 - u8 shared_proc:1; // Shared processor indicator ... - u8 secondary_thread:1; // Secondary thread indicator ... - volatile u8 dyn_proc_status:8; // Dynamic Status of this proc x0A-x0A - u8 secondary_thread_count; // Secondary thread count x0B-x0B - volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D - volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F - u32 decr_val; // Value for Decr programming x10-x13 - u32 pmc_val; // Value for PMC regs x14-x17 - volatile u32 dyn_hw_node_id; // Dynamic Hardware Node id x18-x1B - volatile u32 dyn_hw_proc_id; // Dynamic Hardware Proc Id x1C-x1F - volatile u32 dyn_pir; // Dynamic ProcIdReg value x20-x23 - u32 dsei_data; // DSEI data x24-x27 - u64 sprg3; // SPRG3 value x28-x2F - u8 reserved3[80]; // Reserved x30-x7F - -//============================================================================= -// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data -//============================================================================= - // This Dword contains a byte for each type of interrupt that can occur. - // The IPI is a count while the others are just a binary 1 or 0. - union { - u64 any_int; - struct { - u16 reserved; // Reserved - cleared by #mpasmbl - u8 xirr_int; // Indicates xXirrValue is valid or Immed IO - u8 ipi_cnt; // IPI Count - u8 decr_int; // DECR interrupt occurred - u8 pdc_int; // PDC interrupt occurred - u8 quantum_int; // Interrupt quantum reached - u8 old_plic_deferred_ext_int; // Old PLIC has a deferred XIRR pending - } fields; - } int_dword; - - // Whenever any fields in this Dword are set then PLIC will defer the - // processing of external interrupts. Note that PLIC will store the - // XIRR directly into the xXirrValue field so that another XIRR will - // not be presented until this one clears. The layout of the low - // 4-bytes of this Dword is upto SLIC - PLIC just checks whether the - // entire Dword is zero or not. A non-zero value in the low order - // 2-bytes will result in SLIC being granted the highest thread - // priority upon return. A 0 will return to SLIC as medium priority. - u64 plic_defer_ints_area; // Entire Dword - - // Used to pass the real SRR0/1 from PLIC to SLIC as well as to - // pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid. - u64 saved_srr0; // Saved SRR0 x10-x17 - u64 saved_srr1; // Saved SRR1 x18-x1F - - // Used to pass parms from the OS to PLIC for SetAsrAndRfid - u64 saved_gpr3; // Saved GPR3 x20-x27 - u64 saved_gpr4; // Saved GPR4 x28-x2F - u64 saved_gpr5; // Saved GPR5 x30-x37 - - u8 reserved4; // Reserved x38-x38 - u8 cpuctls_task_attrs; // Task attributes for cpuctls x39-x39 - u8 fpregs_in_use; // FP regs in use x3A-x3A - u8 pmcregs_in_use; // PMC regs in use x3B-x3B - volatile u32 saved_decr; // Saved Decr Value x3C-x3F - volatile u64 emulated_time_base;// Emulated TB for this thread x40-x47 - volatile u64 cur_plic_latency; // Unaccounted PLIC latency x48-x4F - u64 tot_plic_latency; // Accumulated PLIC latency x50-x57 - u64 wait_state_cycles; // Wait cycles for this proc x58-x5F - u64 end_of_quantum; // TB at end of quantum x60-x67 - u64 pdc_saved_sprg1; // Saved SPRG1 for PMC int x68-x6F - u64 pdc_saved_srr0; // Saved SRR0 for PMC int x70-x77 - volatile u32 virtual_decr; // Virtual DECR for shared procsx78-x7B - u16 slb_count; // # of SLBs to maintain x7C-x7D - u8 idle; // Indicate OS is idle x7E - u8 vmxregs_in_use; // VMX registers in use x7F - - -//============================================================================= -// CACHE_LINE_3 0x0100 - 0x007F: This line is shared with other processors -//============================================================================= - // This is the yield_count. An "odd" value (low bit on) means that - // the processor is yielded (either because of an OS yield or a PLIC - // preempt). An even value implies that the processor is currently - // executing. - // NOTE: This value will ALWAYS be zero for dedicated processors and - // will NEVER be zero for shared processors (ie, initialized to a 1). - volatile u32 yield_count; // PLIC increments each dispatchx00-x03 - u8 reserved6[124]; // Reserved x04-x7F - -//============================================================================= -// CACHE_LINE_4-5 0x0100 - 0x01FF Contains PMC interrupt data -//============================================================================= - u8 pmc_save_area[256]; // PMC interrupt Area x00-xFF -}; - -#endif /* _ASM_LPPACA_H */ diff --git a/include/asm-ppc64/paca.h b/include/asm-ppc64/paca.h deleted file mode 100644 index bccacd6aa93a..000000000000 --- a/include/asm-ppc64/paca.h +++ /dev/null @@ -1,121 +0,0 @@ -#ifndef _PPC64_PACA_H -#define _PPC64_PACA_H - -/* - * include/asm-ppc64/paca.h - * - * This control block defines the PACA which defines the processor - * specific data for each logical processor on the system. - * There are some pointers defined that are utilized by PLIC. - * - * C 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include - -register struct paca_struct *local_paca asm("r13"); -#define get_paca() local_paca - -struct task_struct; - -/* - * Defines the layout of the paca. - * - * This structure is not directly accessed by firmware or the service - * processor except for the first two pointers that point to the - * lppaca area and the ItLpRegSave area for this CPU. Both the - * lppaca and ItLpRegSave objects are currently contained within the - * PACA but they do not need to be. - */ -struct paca_struct { - /* - * Because hw_cpu_id, unlike other paca fields, is accessed - * routinely from other CPUs (from the IRQ code), we stick to - * read-only (after boot) fields in the first cacheline to - * avoid cacheline bouncing. - */ - - /* - * MAGIC: These first two pointers can't be moved - they're - * accessed by the firmware - */ - struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ - struct ItLpRegSave *reg_save_ptr; /* Pointer to LpRegSave for PLIC */ - - /* - * MAGIC: the spinlock functions in arch/ppc64/lib/locks.c - * load lock_token and paca_index with a single lwz - * instruction. They must travel together and be properly - * aligned. - */ - u16 lock_token; /* Constant 0x8000, used in locks */ - u16 paca_index; /* Logical processor number */ - - u32 default_decr; /* Default decrementer value */ - u64 kernel_toc; /* Kernel TOC address */ - u64 stab_real; /* Absolute address of segment table */ - u64 stab_addr; /* Virtual address of segment table */ - void *emergency_sp; /* pointer to emergency stack */ - s16 hw_cpu_id; /* Physical processor number */ - u8 cpu_start; /* At startup, processor spins until */ - /* this becomes non-zero. */ - - /* - * Now, starting in cacheline 2, the exception save areas - */ - /* used for most interrupts/exceptions */ - u64 exgen[10] __attribute__((aligned(0x80))); - u64 exmc[10]; /* used for machine checks */ - u64 exslb[10]; /* used for SLB/segment table misses - * on the linear mapping */ -#ifdef CONFIG_PPC_64K_PAGES - pgd_t *pgdir; -#endif /* CONFIG_PPC_64K_PAGES */ - - mm_context_t context; - u16 slb_cache[SLB_CACHE_ENTRIES]; - u16 slb_cache_ptr; - - /* - * then miscellaneous read-write fields - */ - struct task_struct *__current; /* Pointer to current */ - u64 kstack; /* Saved Kernel stack addr */ - u64 stab_rr; /* stab/slb round-robin counter */ - u64 next_jiffy_update_tb; /* TB value for next jiffy update */ - u64 saved_r1; /* r1 save for RTAS calls */ - u64 saved_msr; /* MSR saved here by enter_rtas */ - u8 proc_enabled; /* irq soft-enable flag */ - - /* not yet used */ - u64 exdsi[8]; /* used for linear mapping hash table misses */ - - /* - * iSeries structure which the hypervisor knows about - - * this structure should not cross a page boundary. - * The vpa_init/register_vpa call is now known to fail if the - * lppaca structure crosses a page boundary. - * The lppaca is also used on POWER5 pSeries boxes. - * The lppaca is 640 bytes long, and cannot readily change - * since the hypervisor knows its layout, so a 1kB - * alignment will suffice to ensure that it doesn't - * cross a page boundary. - */ - struct lppaca lppaca __attribute__((__aligned__(0x400))); -#ifdef CONFIG_PPC_ISERIES - struct ItLpRegSave reg_save; -#endif -}; - -extern struct paca_struct paca[]; - -#endif /* _PPC64_PACA_H */ diff --git a/include/asm-ppc64/tce.h b/include/asm-ppc64/tce.h deleted file mode 100644 index d40b6b42ab35..000000000000 --- a/include/asm-ppc64/tce.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation - * Rewrite, cleanup: - * Copyright (C) 2004 Olof Johansson , IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_TCE_H -#define _ASM_TCE_H - -/* - * Tces come in two formats, one for the virtual bus and a different - * format for PCI - */ -#define TCE_VB 0 -#define TCE_PCI 1 - -/* TCE page size is 4096 bytes (1 << 12) */ - -#define TCE_SHIFT 12 -#define TCE_PAGE_SIZE (1 << TCE_SHIFT) -#define TCE_PAGE_FACTOR (PAGE_SHIFT - TCE_SHIFT) - - -/* tce_entry - * Used by pSeries (SMP) and iSeries/pSeries LPAR, but there it's - * abstracted so layout is irrelevant. - */ -union tce_entry { - unsigned long te_word; - struct { - unsigned int tb_cacheBits :6; /* Cache hash bits - not used */ - unsigned int tb_rsvd :6; - unsigned long tb_rpn :40; /* Real page number */ - unsigned int tb_valid :1; /* Tce is valid (vb only) */ - unsigned int tb_allio :1; /* Tce is valid for all lps (vb only) */ - unsigned int tb_lpindex :8; /* LpIndex for user of TCE (vb only) */ - unsigned int tb_pciwr :1; /* Write allowed (pci only) */ - unsigned int tb_rdwr :1; /* Read allowed (pci), Write allowed (vb) */ - } te_bits; -#define te_cacheBits te_bits.tb_cacheBits -#define te_rpn te_bits.tb_rpn -#define te_valid te_bits.tb_valid -#define te_allio te_bits.tb_allio -#define te_lpindex te_bits.tb_lpindex -#define te_pciwr te_bits.tb_pciwr -#define te_rdwr te_bits.tb_rdwr -}; - - -#endif -- cgit v1.2.3 From ae65a391caf1830aea9e4cadd69bb1aa69aad492 Mon Sep 17 00:00:00 2001 From: linas Date: Thu, 3 Nov 2005 18:42:26 -0600 Subject: [PATCH] ppc64: uniform usage of bus unit id interfaces 01-pci-dn-uniformization.patch This patch changes the rtas_pci interface to use the new struct pci_dn structure for two routines that work with pci device nodes. This patch also does some minor janitorial work: it uses some handy macros and cleans up some trailing whitespace in the affected file. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/ppc64/kernel/eeh.c | 4 ---- arch/ppc64/kernel/rtas_pci.c | 47 ++++++++++++++++++++++--------------------- include/asm-powerpc/ppc-pci.h | 4 ++++ 3 files changed, 28 insertions(+), 27 deletions(-) (limited to 'include') diff --git a/arch/ppc64/kernel/eeh.c b/arch/ppc64/kernel/eeh.c index 035d1b14a207..eedf21d5f3b7 100644 --- a/arch/ppc64/kernel/eeh.c +++ b/arch/ppc64/kernel/eeh.c @@ -71,10 +71,6 @@ * and sent out for processing. */ -/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */ -#define BUID_HI(buid) ((buid) >> 32) -#define BUID_LO(buid) ((buid) & 0xffffffff) - /* EEH event workqueue setup. */ static DEFINE_SPINLOCK(eeh_eventlist_lock); LIST_HEAD(eeh_eventlist); diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/ppc64/kernel/rtas_pci.c index 3c3f19192fcc..0e5a8e116653 100644 --- a/arch/ppc64/kernel/rtas_pci.c +++ b/arch/ppc64/kernel/rtas_pci.c @@ -5,19 +5,19 @@ * Copyright (C) 2003 Anton Blanchard , IBM * * RTAS specific routines for PCI. - * + * * Based on code from pci.c, chrp_pci.c and pSeries_pci.c * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA @@ -47,7 +47,7 @@ static int write_pci_config; static int ibm_read_pci_config; static int ibm_write_pci_config; -static int config_access_valid(struct pci_dn *dn, int where) +static inline int config_access_valid(struct pci_dn *dn, int where) { if (where < 256) return 1; @@ -72,16 +72,14 @@ static int of_device_available(struct device_node * dn) return 0; } -static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val) +static int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val) { int returnval = -1; unsigned long buid, addr; int ret; - struct pci_dn *pdn; - if (!dn || !dn->data) + if (!pdn) return PCIBIOS_DEVICE_NOT_FOUND; - pdn = dn->data; if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; @@ -90,7 +88,7 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va buid = pdn->phb->buid; if (buid) { ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, - addr, buid >> 32, buid & 0xffffffff, size); + addr, BUID_HI(buid), BUID_LO(buid), size); } else { ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); } @@ -100,7 +98,7 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va return PCIBIOS_DEVICE_NOT_FOUND; if (returnval == EEH_IO_ERROR_VALUE(size) && - eeh_dn_check_failure (dn, NULL)) + eeh_dn_check_failure (pdn->node, NULL)) return PCIBIOS_DEVICE_NOT_FOUND; return PCIBIOS_SUCCESSFUL; @@ -118,23 +116,23 @@ static int rtas_pci_read_config(struct pci_bus *bus, busdn = bus->sysdata; /* must be a phb */ /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn + for (dn = busdn->child; dn; dn = dn->sibling) { + struct pci_dn *pdn = PCI_DN(dn); + if (pdn && pdn->devfn == devfn && of_device_available(dn)) - return rtas_read_config(dn, where, size, val); + return rtas_read_config(pdn, where, size, val); + } return PCIBIOS_DEVICE_NOT_FOUND; } -int rtas_write_config(struct device_node *dn, int where, int size, u32 val) +int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val) { unsigned long buid, addr; int ret; - struct pci_dn *pdn; - if (!dn || !dn->data) + if (!pdn) return PCIBIOS_DEVICE_NOT_FOUND; - pdn = dn->data; if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; @@ -142,7 +140,8 @@ int rtas_write_config(struct device_node *dn, int where, int size, u32 val) (pdn->devfn << 8) | (where & 0xff); buid = pdn->phb->buid; if (buid) { - ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); + ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, + BUID_HI(buid), BUID_LO(buid), size, (ulong) val); } else { ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); } @@ -165,10 +164,12 @@ static int rtas_pci_write_config(struct pci_bus *bus, busdn = bus->sysdata; /* must be a phb */ /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn + for (dn = busdn->child; dn; dn = dn->sibling) { + struct pci_dn *pdn = PCI_DN(dn); + if (pdn && pdn->devfn == devfn && of_device_available(dn)) - return rtas_write_config(dn, where, size, val); + return rtas_write_config(pdn, where, size, val); + } return PCIBIOS_DEVICE_NOT_FOUND; } @@ -221,7 +222,7 @@ static void python_countermeasures(struct device_node *dev, /* Python's register file is 1 MB in size. */ chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); - /* + /* * Firmware doesn't always clear this bit which is critical * for good performance - Anton */ @@ -292,7 +293,7 @@ static int phb_set_bus_ranges(struct device_node *dev, if (bus_range == NULL || len < 2 * sizeof(int)) { return 1; } - + phb->first_busno = bus_range[0]; phb->last_busno = bus_range[1]; diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index 13aacff755f3..302f0a9878c7 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -26,6 +26,10 @@ extern unsigned long find_and_init_phbs(void); extern struct pci_dev *ppc64_isabridge_dev; /* may be NULL if no ISA bus */ +/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */ +#define BUID_HI(buid) ((buid) >> 32) +#define BUID_LO(buid) ((buid) & 0xffffffff) + /* PCI device_node operations */ struct device_node; typedef void *(*traverse_func)(struct device_node *me, void *data); -- cgit v1.2.3 From 56b0fca3a008ddec8c00cfdddbef17bd9ce188e3 Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Thu, 3 Nov 2005 18:48:45 -0600 Subject: [PATCH] ppc64: PCI address cache minor fixes 03-eeh-addr-cache-cleanup.patch This is a minor patch to clean up a buglet related to the PCI address cache. (The buglet doesn't manifes itself unless there are also bugs elsewhere, which is why its minor.). Also: -- Improved debug printing. -- Declare some private routines as static -- Adds reference counting to struct pci_dn->pcidev structure Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/ppc64/kernel/eeh.c | 33 ++++++++++++++++++++++++++------- include/asm-powerpc/ppc-pci.h | 4 ---- 2 files changed, 26 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/arch/ppc64/kernel/eeh.c b/arch/ppc64/kernel/eeh.c index bb11569d2b4b..99f11b66b5a0 100644 --- a/arch/ppc64/kernel/eeh.c +++ b/arch/ppc64/kernel/eeh.c @@ -219,9 +219,9 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, while (*p) { parent = *p; piar = rb_entry(parent, struct pci_io_addr_range, rb_node); - if (alo < piar->addr_lo) { + if (ahi < piar->addr_lo) { p = &parent->rb_left; - } else if (ahi > piar->addr_hi) { + } else if (alo > piar->addr_hi) { p = &parent->rb_right; } else { if (dev != piar->pcidev || @@ -240,6 +240,11 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, piar->pcidev = dev; piar->flags = flags; +#ifdef DEBUG + printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n", + alo, ahi, pci_name (dev)); +#endif + rb_link_node(&piar->rb_node, parent, p); rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root); @@ -301,7 +306,7 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev) * we maintain a cache of devices that can be quickly searched. * This routine adds a device to that cache. */ -void pci_addr_cache_insert_device(struct pci_dev *dev) +static void pci_addr_cache_insert_device(struct pci_dev *dev) { unsigned long flags; @@ -344,7 +349,7 @@ restart: * the tree multiple times (once per resource). * But so what; device removal doesn't need to be that fast. */ -void pci_addr_cache_remove_device(struct pci_dev *dev) +static void pci_addr_cache_remove_device(struct pci_dev *dev) { unsigned long flags; @@ -366,6 +371,9 @@ void __init pci_addr_cache_build(void) { struct pci_dev *dev = NULL; + if (!eeh_subsystem_enabled) + return; + spin_lock_init(&pci_io_addr_cache_root.piar_lock); while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { @@ -837,7 +845,7 @@ void eeh_add_device_early(struct device_node *dn) info.buid_lo = BUID_LO(phb->buid); early_enable_eeh(dn, &info); } -EXPORT_SYMBOL(eeh_add_device_early); +EXPORT_SYMBOL_GPL(eeh_add_device_early); /** * eeh_add_device_late - perform EEH initialization for the indicated pci device @@ -848,6 +856,8 @@ EXPORT_SYMBOL(eeh_add_device_early); */ void eeh_add_device_late(struct pci_dev *dev) { + struct device_node *dn; + if (!dev || !eeh_subsystem_enabled) return; @@ -855,9 +865,13 @@ void eeh_add_device_late(struct pci_dev *dev) printk(KERN_DEBUG "EEH: adding device %s\n", pci_name(dev)); #endif + pci_dev_get (dev); + dn = pci_device_to_OF_node(dev); + PCI_DN(dn)->pcidev = dev; + pci_addr_cache_insert_device (dev); } -EXPORT_SYMBOL(eeh_add_device_late); +EXPORT_SYMBOL_GPL(eeh_add_device_late); /** * eeh_remove_device - undo EEH setup for the indicated pci device @@ -868,6 +882,7 @@ EXPORT_SYMBOL(eeh_add_device_late); */ void eeh_remove_device(struct pci_dev *dev) { + struct device_node *dn; if (!dev || !eeh_subsystem_enabled) return; @@ -876,8 +891,12 @@ void eeh_remove_device(struct pci_dev *dev) printk(KERN_DEBUG "EEH: remove device %s\n", pci_name(dev)); #endif pci_addr_cache_remove_device(dev); + + dn = pci_device_to_OF_node(dev); + PCI_DN(dn)->pcidev = NULL; + pci_dev_put (dev); } -EXPORT_SYMBOL(eeh_remove_device); +EXPORT_SYMBOL_GPL(eeh_remove_device); static int proc_eeh_show(struct seq_file *m, void *v) { diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index 302f0a9878c7..c47146f74a7b 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -40,10 +40,6 @@ void pci_devs_phb_init(void); void pci_devs_phb_init_dynamic(struct pci_controller *phb); void __devinit scan_phb(struct pci_controller *hose); -/* PCI address cache management routines */ -void pci_addr_cache_insert_device(struct pci_dev *dev); -void pci_addr_cache_remove_device(struct pci_dev *dev); - /* From rtas_pci.h */ void init_pci_config_tokens (void); unsigned long get_phb_buid (struct device_node *); -- cgit v1.2.3 From f8632c822719cce08cfb128859e354007744cbba Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Thu, 3 Nov 2005 18:49:45 -0600 Subject: [PATCH] ppc64: bugfix: don't silently ignore PCI errors 10-EEH-enable-bugfix.patch Bugfix: With the curent linux-2.6.14-rc2-git6, EEH errors are ignored because thier detection requires an unused, uninitialized flag to be set. This patch removes the unused flag. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/ppc64/kernel/eeh.c | 5 +++-- include/asm-ppc64/pci-bridge.h | 1 - 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/arch/ppc64/kernel/eeh.c b/arch/ppc64/kernel/eeh.c index 0c52c2de92e0..9df1d5018363 100644 --- a/arch/ppc64/kernel/eeh.c +++ b/arch/ppc64/kernel/eeh.c @@ -631,11 +631,12 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) pdn = PCI_DN(dn); /* Access to IO BARs might get this far and still not want checking. */ - if (!pdn->eeh_capable || !(pdn->eeh_mode & EEH_MODE_SUPPORTED) || + if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || pdn->eeh_mode & EEH_MODE_NOCHECK) { __get_cpu_var(ignored_check)++; #ifdef DEBUG - printk ("EEH:ignored check for %s %s\n", pci_name (dev), dn->full_name); + printk ("EEH:ignored check (%x) for %s %s\n", + pdn->eeh_mode, pci_name (dev), dn->full_name); #endif return 0; } diff --git a/include/asm-ppc64/pci-bridge.h b/include/asm-ppc64/pci-bridge.h index 60cf8c838af0..efbdaece0cf0 100644 --- a/include/asm-ppc64/pci-bridge.h +++ b/include/asm-ppc64/pci-bridge.h @@ -63,7 +63,6 @@ struct pci_dn { int devfn; /* for pci devices */ int eeh_mode; /* See eeh.h for possible EEH_MODEs */ int eeh_config_addr; - int eeh_capable; /* from firmware */ int eeh_check_count; /* # times driver ignored error */ int eeh_freeze_count; /* # times this device froze up. */ int eeh_is_bridge; /* device is pci-to-pci bridge */ -- cgit v1.2.3 From 172ca9261800bacbbc7d320d9924d9b482dff8de Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Thu, 3 Nov 2005 18:50:04 -0600 Subject: [PATCH] ppc64: PCI error event dispatcher 12-eeh-event-dispatcher.patch ppc64: EEH Recovery dispatcher thread This patch adds a mechanism to create recovery threads when an EEH event is received. Since an EEH freeze state may be detected within an interrupt context, we need to get out of the interrupt context before starting recovery. This dispatcher does this in two steps: first, it uses a workqueue to get out, and then lanuches a kernel thread, so that the recovery routine can sleep for exteded periods without upseting the keventd. A kernel thread is created with each EEH event, rather than having one long-running daemon started at boot time. This is because it is anticipated that EEH events will be very rare (very very rare, ideally) and so its pointless to cluter the process tables with a daemon that will almost never run. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/Makefile | 2 +- arch/powerpc/platforms/pseries/eeh.c | 138 +++---------------------- arch/powerpc/platforms/pseries/eeh_event.c | 155 +++++++++++++++++++++++++++++ include/asm-powerpc/eeh_event.h | 52 ++++++++++ include/asm-ppc64/eeh.h | 46 +++------ 5 files changed, 236 insertions(+), 157 deletions(-) create mode 100644 arch/powerpc/platforms/pseries/eeh_event.c create mode 100644 include/asm-powerpc/eeh_event.h (limited to 'include') diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index dbdffb2fe429..27515476ad6c 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -3,4 +3,4 @@ obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o -obj-$(CONFIG_EEH) += eeh.o +obj-$(CONFIG_EEH) += eeh.o eeh_event.o diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 9df1d5018363..1fec99d53311 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -19,7 +19,6 @@ #include #include -#include #include #include #include @@ -27,12 +26,12 @@ #include #include #include +#include #include #include +#include #include -#include #include -#include #undef DEBUG @@ -70,14 +69,6 @@ * and sent out for processing. */ -/* EEH event workqueue setup. */ -static DEFINE_SPINLOCK(eeh_eventlist_lock); -LIST_HEAD(eeh_eventlist); -static void eeh_event_handler(void *); -DECLARE_WORK(eeh_event_wq, eeh_event_handler, NULL); - -static struct notifier_block *eeh_notifier_chain; - /* If a device driver keeps reading an MMIO register in an interrupt * handler after a slot isolation event has occurred, we assume it * is broken and panic. This sets the threshold for how many read @@ -420,24 +411,6 @@ void eeh_slot_error_detail (struct pci_dn *pdn, int severity) spin_unlock_irqrestore(&slot_errbuf_lock, flags); } -/** - * eeh_register_notifier - Register to find out about EEH events. - * @nb: notifier block to callback on events - */ -int eeh_register_notifier(struct notifier_block *nb) -{ - return notifier_chain_register(&eeh_notifier_chain, nb); -} - -/** - * eeh_unregister_notifier - Unregister to an EEH event notifier. - * @nb: notifier block to callback on events - */ -int eeh_unregister_notifier(struct notifier_block *nb) -{ - return notifier_chain_unregister(&eeh_notifier_chain, nb); -} - /** * read_slot_reset_state - Read the reset state of a device node's slot * @dn: device node to read @@ -460,73 +433,6 @@ static int read_slot_reset_state(struct pci_dn *pdn, int rets[]) BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid)); } -/** - * eeh_panic - call panic() for an eeh event that cannot be handled. - * The philosophy of this routine is that it is better to panic and - * halt the OS than it is to risk possible data corruption by - * oblivious device drivers that don't know better. - * - * @dev pci device that had an eeh event - * @reset_state current reset state of the device slot - */ -static void eeh_panic(struct pci_dev *dev, int reset_state) -{ - /* - * XXX We should create a separate sysctl for this. - * - * Since the panic_on_oops sysctl is used to halt the system - * in light of potential corruption, we can use it here. - */ - if (panic_on_oops) { - struct device_node *dn = pci_device_to_OF_node(dev); - eeh_slot_error_detail (PCI_DN(dn), 2 /* Permanent Error */); - panic("EEH: MMIO failure (%d) on device:%s\n", reset_state, - pci_name(dev)); - } - else { - __get_cpu_var(ignored_failures)++; - printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n", - reset_state, pci_name(dev)); - } -} - -/** - * eeh_event_handler - dispatch EEH events. The detection of a frozen - * slot can occur inside an interrupt, where it can be hard to do - * anything about it. The goal of this routine is to pull these - * detection events out of the context of the interrupt handler, and - * re-dispatch them for processing at a later time in a normal context. - * - * @dummy - unused - */ -static void eeh_event_handler(void *dummy) -{ - unsigned long flags; - struct eeh_event *event; - - while (1) { - spin_lock_irqsave(&eeh_eventlist_lock, flags); - event = NULL; - if (!list_empty(&eeh_eventlist)) { - event = list_entry(eeh_eventlist.next, struct eeh_event, list); - list_del(&event->list); - } - spin_unlock_irqrestore(&eeh_eventlist_lock, flags); - if (event == NULL) - break; - - printk(KERN_INFO "EEH: MMIO failure (%d), notifiying device " - "%s\n", event->reset_state, - pci_name(event->dev)); - - notifier_call_chain (&eeh_notifier_chain, - EEH_NOTIFY_FREEZE, event); - - pci_dev_put(event->dev); - kfree(event); - } -} - /** * eeh_token_to_phys - convert EEH address token to phys address * @token i/o token, should be address in the form 0xA.... @@ -613,8 +519,6 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) int ret; int rets[3]; unsigned long flags; - int reset_state; - struct eeh_event *event; struct pci_dn *pdn; struct device_node *pe_dn; int rc = 0; @@ -722,33 +626,12 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) __eeh_mark_slot (pe_dn); spin_unlock_irqrestore(&confirm_error_lock, flags); - reset_state = rets[0]; - - eeh_slot_error_detail (pdn, 1 /* Temporary Error */); - - printk(KERN_INFO "EEH: MMIO failure (%d) on device: %s %s\n", - rets[0], dn->name, dn->full_name); - event = kmalloc(sizeof(*event), GFP_ATOMIC); - if (event == NULL) { - eeh_panic(dev, reset_state); - return 1; - } - - event->dev = dev; - event->dn = dn; - event->reset_state = reset_state; - - /* We may or may not be called in an interrupt context */ - spin_lock_irqsave(&eeh_eventlist_lock, flags); - list_add(&event->list, &eeh_eventlist); - spin_unlock_irqrestore(&eeh_eventlist_lock, flags); - + eeh_send_failure_event (dn, dev, rets[0], rets[2]); + /* Most EEH events are due to device driver bugs. Having * a stack trace will help the device-driver authors figure * out what happened. So print that out. */ if (rets[0] != 5) dump_stack(); - schedule_work(&eeh_event_wq); - return 1; dn_unlock: @@ -793,6 +676,14 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon EXPORT_SYMBOL(eeh_check_failure); +/* ------------------------------------------------------------- */ +/* The code below deals with enabling EEH for devices during the + * early boot sequence. EEH must be enabled before any PCI probing + * can be done. + */ + +#define EEH_ENABLE 1 + struct eeh_early_enable_info { unsigned int buid_hi; unsigned int buid_lo; @@ -850,8 +741,9 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* First register entry is addr (00BBSS00) */ /* Try to enable eeh */ ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL, - regs[0], info->buid_hi, info->buid_lo, - EEH_ENABLE); + regs[0], info->buid_hi, info->buid_lo, + EEH_ENABLE); + if (ret == 0) { eeh_subsystem_enabled = 1; pdn->eeh_mode |= EEH_MODE_SUPPORTED; diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c new file mode 100644 index 000000000000..92497333c2b6 --- /dev/null +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -0,0 +1,155 @@ +/* + * eeh_event.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Copyright (c) 2005 Linas Vepstas + */ + +#include +#include +#include + +/** Overview: + * EEH error states may be detected within exception handlers; + * however, the recovery processing needs to occur asynchronously + * in a normal kernel context and not an interrupt context. + * This pair of routines creates an event and queues it onto a + * work-queue, where a worker thread can drive recovery. + */ + +/* EEH event workqueue setup. */ +static spinlock_t eeh_eventlist_lock = SPIN_LOCK_UNLOCKED; +LIST_HEAD(eeh_eventlist); +static void eeh_thread_launcher(void *); +DECLARE_WORK(eeh_event_wq, eeh_thread_launcher, NULL); + +/** + * eeh_panic - call panic() for an eeh event that cannot be handled. + * The philosophy of this routine is that it is better to panic and + * halt the OS than it is to risk possible data corruption by + * oblivious device drivers that don't know better. + * + * @dev pci device that had an eeh event + * @reset_state current reset state of the device slot + */ +static void eeh_panic(struct pci_dev *dev, int reset_state) +{ + /* + * Since the panic_on_oops sysctl is used to halt the system + * in light of potential corruption, we can use it here. + */ + if (panic_on_oops) { + panic("EEH: MMIO failure (%d) on device:%s\n", reset_state, + pci_name(dev)); + } + else { + printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n", + reset_state, pci_name(dev)); + } +} + +/** + * eeh_event_handler - dispatch EEH events. The detection of a frozen + * slot can occur inside an interrupt, where it can be hard to do + * anything about it. The goal of this routine is to pull these + * detection events out of the context of the interrupt handler, and + * re-dispatch them for processing at a later time in a normal context. + * + * @dummy - unused + */ +static int eeh_event_handler(void * dummy) +{ + unsigned long flags; + struct eeh_event *event; + + daemonize ("eehd"); + + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + + spin_lock_irqsave(&eeh_eventlist_lock, flags); + event = NULL; + if (!list_empty(&eeh_eventlist)) { + event = list_entry(eeh_eventlist.next, struct eeh_event, list); + list_del(&event->list); + } + spin_unlock_irqrestore(&eeh_eventlist_lock, flags); + if (event == NULL) + break; + + printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n", + pci_name(event->dev)); + + eeh_panic (event->dev, event->state); + + kfree(event); + } + + return 0; +} + +/** + * eeh_thread_launcher + * + * @dummy - unused + */ +static void eeh_thread_launcher(void *dummy) +{ + if (kernel_thread(eeh_event_handler, NULL, CLONE_KERNEL) < 0) + printk(KERN_ERR "Failed to start EEH daemon\n"); +} + +/** + * eeh_send_failure_event - generate a PCI error event + * @dev pci device + * + * This routine can be called within an interrupt context; + * the actual event will be delivered in a normal context + * (from a workqueue). + */ +int eeh_send_failure_event (struct device_node *dn, + struct pci_dev *dev, + int state, + int time_unavail) +{ + unsigned long flags; + struct eeh_event *event; + + event = kmalloc(sizeof(*event), GFP_ATOMIC); + if (event == NULL) { + printk (KERN_ERR "EEH: out of memory, event not handled\n"); + return 1; + } + + if (dev) + pci_dev_get(dev); + + event->dn = dn; + event->dev = dev; + event->state = state; + event->time_unavail = time_unavail; + + /* We may or may not be called in an interrupt context */ + spin_lock_irqsave(&eeh_eventlist_lock, flags); + list_add(&event->list, &eeh_eventlist); + spin_unlock_irqrestore(&eeh_eventlist_lock, flags); + + schedule_work(&eeh_event_wq); + + return 0; +} + +/********************** END OF FILE ******************************/ diff --git a/include/asm-powerpc/eeh_event.h b/include/asm-powerpc/eeh_event.h new file mode 100644 index 000000000000..d168a30b3866 --- /dev/null +++ b/include/asm-powerpc/eeh_event.h @@ -0,0 +1,52 @@ +/* + * eeh_event.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Copyright (c) 2005 Linas Vepstas + */ + +#ifndef ASM_PPC64_EEH_EVENT_H +#define ASM_PPC64_EEH_EVENT_H + +/** EEH event -- structure holding pci controller data that describes + * a change in the isolation status of a PCI slot. A pointer + * to this struct is passed as the data pointer in a notify callback. + */ +struct eeh_event { + struct list_head list; + struct device_node *dn; /* struct device node */ + struct pci_dev *dev; /* affected device */ + int state; + int time_unavail; /* milliseconds until device might be available */ +}; + +/** + * eeh_send_failure_event - generate a PCI error event + * @dev pci device + * + * This routine builds a PCI error event which will be delivered + * to all listeners on the peh_notifier_chain. + * + * This routine can be called within an interrupt context; + * the actual event will be delivered in a normal context + * (from a workqueue). + */ +int eeh_send_failure_event (struct device_node *dn, + struct pci_dev *dev, + int reset_state, + int time_unavail); + +#endif /* ASM_PPC64_EEH_EVENT_H */ diff --git a/include/asm-ppc64/eeh.h b/include/asm-ppc64/eeh.h index 40c8eb57493e..89f26ab31908 100644 --- a/include/asm-ppc64/eeh.h +++ b/include/asm-ppc64/eeh.h @@ -1,4 +1,4 @@ -/* +/* * eeh.h * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation. * @@ -6,12 +6,12 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA @@ -27,8 +27,6 @@ struct pci_dev; struct device_node; -struct device_node; -struct notifier_block; #ifdef CONFIG_EEH @@ -37,6 +35,10 @@ struct notifier_block; #define EEH_MODE_NOCHECK (1<<1) #define EEH_MODE_ISOLATED (1<<2) +/* Max number of EEH freezes allowed before we consider the device + * to be permanently disabled. */ +#define EEH_MAX_ALLOWED_FREEZES 5 + void __init eeh_init(void); unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val); @@ -59,36 +61,14 @@ void eeh_add_device_late(struct pci_dev *); * eeh_remove_device - undo EEH setup for the indicated pci device * @dev: pci device to be removed * - * This routine should be when a device is removed from a running - * system (e.g. by hotplug or dlpar). + * This routine should be called when a device is removed from + * a running system (e.g. by hotplug or dlpar). It unregisters + * the PCI device from the EEH subsystem. I/O errors affecting + * this device will no longer be detected after this call; thus, + * i/o errors affecting this slot may leave this device unusable. */ void eeh_remove_device(struct pci_dev *); -#define EEH_DISABLE 0 -#define EEH_ENABLE 1 -#define EEH_RELEASE_LOADSTORE 2 -#define EEH_RELEASE_DMA 3 - -/** - * Notifier event flags. - */ -#define EEH_NOTIFY_FREEZE 1 - -/** EEH event -- structure holding pci slot data that describes - * a change in the isolation status of a PCI slot. A pointer - * to this struct is passed as the data pointer in a notify callback. - */ -struct eeh_event { - struct list_head list; - struct pci_dev *dev; - struct device_node *dn; - int reset_state; -}; - -/** Register to find out about EEH events. */ -int eeh_register_notifier(struct notifier_block *nb); -int eeh_unregister_notifier(struct notifier_block *nb); - /** * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure. * @@ -129,7 +109,7 @@ static inline void eeh_remove_device(struct pci_dev *dev) { } #define EEH_IO_ERROR_VALUE(size) (-1UL) #endif /* CONFIG_EEH */ -/* +/* * MMIO read/write operations with EEH support. */ static inline u8 eeh_readb(const volatile void __iomem *addr) -- cgit v1.2.3 From 6dee3fb94004c43ce09f6bf5e7c0b778ec5b8cc8 Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Thu, 3 Nov 2005 18:50:10 -0600 Subject: [PATCH] ppc64: PCI reset support routines 13-eeh-recovery-support-routines.patch EEH Recovery support routines This patch adds routines required to help drive the recovery of EEH-frozen slots. The main function is to drive the PCI #RST signal line high for a qurter of a second, and then allow for a second & a half of settle time. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh.c | 99 ++++++++++++++++++++++++++++++++++++ include/asm-powerpc/ppc-pci.h | 14 +++++ 2 files changed, 113 insertions(+) (limited to 'include') diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 1fec99d53311..a06c91a4852b 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -17,6 +17,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include #include #include #include @@ -676,6 +677,104 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon EXPORT_SYMBOL(eeh_check_failure); +/* ------------------------------------------------------------- */ +/* The code below deals with error recovery */ + +/** Return negative value if a permanent error, else return + * a number of milliseconds to wait until the PCI slot is + * ready to be used. + */ +static int +eeh_slot_availability(struct pci_dn *pdn) +{ + int rc; + int rets[3]; + + rc = read_slot_reset_state(pdn, rets); + + if (rc) return rc; + + if (rets[1] == 0) return -1; /* EEH is not supported */ + if (rets[0] == 0) return 0; /* Oll Korrect */ + if (rets[0] == 5) { + if (rets[2] == 0) return -1; /* permanently unavailable */ + return rets[2]; /* number of millisecs to wait */ + } + return -1; +} + +/** rtas_pci_slot_reset raises/lowers the pci #RST line + * state: 1/0 to raise/lower the #RST + * + * Clear the EEH-frozen condition on a slot. This routine + * asserts the PCI #RST line if the 'state' argument is '1', + * and drops the #RST line if 'state is '0'. This routine is + * safe to call in an interrupt context. + * + */ + +static void +rtas_pci_slot_reset(struct pci_dn *pdn, int state) +{ + int rc; + + BUG_ON (pdn==NULL); + + if (!pdn->phb) { + printk (KERN_WARNING "EEH: in slot reset, device node %s has no phb\n", + pdn->node->full_name); + return; + } + + rc = rtas_call(ibm_set_slot_reset,4,1, NULL, + pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid), + state); + if (rc) { + printk (KERN_WARNING "EEH: Unable to reset the failed slot, (%d) #RST=%d dn=%s\n", + rc, state, pdn->node->full_name); + return; + } + + if (state == 0) + eeh_clear_slot (pdn->node->parent->child); +} + +/** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second + * dn -- device node to be reset. + */ + +void +rtas_set_slot_reset(struct pci_dn *pdn) +{ + int i, rc; + + rtas_pci_slot_reset (pdn, 1); + + /* The PCI bus requires that the reset be held high for at least + * a 100 milliseconds. We wait a bit longer 'just in case'. */ + +#define PCI_BUS_RST_HOLD_TIME_MSEC 250 + msleep (PCI_BUS_RST_HOLD_TIME_MSEC); + rtas_pci_slot_reset (pdn, 0); + + /* After a PCI slot has been reset, the PCI Express spec requires + * a 1.5 second idle time for the bus to stabilize, before starting + * up traffic. */ +#define PCI_BUS_SETTLE_TIME_MSEC 1800 + msleep (PCI_BUS_SETTLE_TIME_MSEC); + + /* Now double check with the firmware to make sure the device is + * ready to be used; if not, wait for recovery. */ + for (i=0; i<10; i++) { + rc = eeh_slot_availability (pdn); + if (rc <= 0) break; + + msleep (rc+100); + } +} + /* ------------------------------------------------------------- */ /* The code below deals with enabling EEH for devices during the * early boot sequence. EEH must be enabled before any PCI probing diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index c47146f74a7b..930a606b4e35 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -52,4 +52,18 @@ extern unsigned long pci_probe_only; extern unsigned long pci_assign_all_buses; extern int pci_read_irq_line(struct pci_dev *pci_dev); +/* ---- EEH internal-use-only related routines ---- */ +#ifdef CONFIG_EEH +/** + * rtas_set_slot_reset -- unfreeze a frozen slot + * + * Clear the EEH-frozen condition on a slot. This routine + * does this by asserting the PCI #RST line for 1/8th of + * a second; this routine will sleep while the adapter is + * being reset. + */ +void rtas_set_slot_reset (struct pci_dn *); + +#endif + #endif /* _ASM_POWERPC_PPC_PCI_H */ -- cgit v1.2.3 From 8b553f32db3bf5d0ec0819c595932eb21cd45945 Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Thu, 3 Nov 2005 18:50:17 -0600 Subject: [PATCH] ppc64: Save & restore of PCI device BARS 14-eeh-device-bar-save.patch After a PCI device has been resest, the device BAR's and other config space info must be restored to the same state as they were in when the firmware first handed us this device. This will allow the PCI device driver, when restarted, to correctly recognize and set up the device. Tis patch saves the device config space as early as reasonable after the firmware has handed over the device. Te state resore funcion is inteded for use by the EEH recovery routines. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh.c | 115 ++++++++++++++++++++++++++++++++++- include/asm-powerpc/ppc-pci.h | 23 +++++++ 2 files changed, 137 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index a06c91a4852b..b760836bb9d1 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -77,6 +77,9 @@ */ #define EEH_MAX_FAILS 100000 +/* Misc forward declaraions */ +static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn); + /* RTAS tokens */ static int ibm_set_eeh_option; static int ibm_set_slot_reset; @@ -366,6 +369,7 @@ static void pci_addr_cache_remove_device(struct pci_dev *dev) */ void __init pci_addr_cache_build(void) { + struct device_node *dn; struct pci_dev *dev = NULL; if (!eeh_subsystem_enabled) @@ -379,6 +383,10 @@ void __init pci_addr_cache_build(void) continue; } pci_addr_cache_insert_device(dev); + + /* Save the BAR's; firmware doesn't restore these after EEH reset */ + dn = pci_device_to_OF_node(dev); + eeh_save_bars(dev, PCI_DN(dn)); } #ifdef DEBUG @@ -775,6 +783,108 @@ rtas_set_slot_reset(struct pci_dn *pdn) } } +/* ------------------------------------------------------- */ +/** Save and restore of PCI BARs + * + * Although firmware will set up BARs during boot, it doesn't + * set up device BAR's after a device reset, although it will, + * if requested, set up bridge configuration. Thus, we need to + * configure the PCI devices ourselves. + */ + +/** + * __restore_bars - Restore the Base Address Registers + * Loads the PCI configuration space base address registers, + * the expansion ROM base address, the latency timer, and etc. + * from the saved values in the device node. + */ +static inline void __restore_bars (struct pci_dn *pdn) +{ + int i; + + if (NULL==pdn->phb) return; + for (i=4; i<10; i++) { + rtas_write_config(pdn, i*4, 4, pdn->config_space[i]); + } + + /* 12 == Expansion ROM Address */ + rtas_write_config(pdn, 12*4, 4, pdn->config_space[12]); + +#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF)) +#define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)]) + + rtas_write_config (pdn, PCI_CACHE_LINE_SIZE, 1, + SAVED_BYTE(PCI_CACHE_LINE_SIZE)); + + rtas_write_config (pdn, PCI_LATENCY_TIMER, 1, + SAVED_BYTE(PCI_LATENCY_TIMER)); + + /* max latency, min grant, interrupt pin and line */ + rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]); +} + +/** + * eeh_restore_bars - restore the PCI config space info + * + * This routine performs a recursive walk to the children + * of this device as well. + */ +void eeh_restore_bars(struct pci_dn *pdn) +{ + struct device_node *dn; + if (!pdn) + return; + + if (! pdn->eeh_is_bridge) + __restore_bars (pdn); + + dn = pdn->node->child; + while (dn) { + eeh_restore_bars (PCI_DN(dn)); + dn = dn->sibling; + } +} + +/** + * eeh_save_bars - save device bars + * + * Save the values of the device bars. Unlike the restore + * routine, this routine is *not* recursive. This is because + * PCI devices are added individuallly; but, for the restore, + * an entire slot is reset at a time. + */ +static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn) +{ + int i; + + if (!pdev || !pdn ) + return; + + for (i = 0; i < 16; i++) + pci_read_config_dword(pdev, i * 4, &pdn->config_space[i]); + + if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + pdn->eeh_is_bridge = 1; +} + +void +rtas_configure_bridge(struct pci_dn *pdn) +{ + int token = rtas_token ("ibm,configure-bridge"); + int rc; + + if (token == RTAS_UNKNOWN_SERVICE) + return; + rc = rtas_call(token,3,1, NULL, + pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid)); + if (rc) { + printk (KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n", + rc, pdn->node->full_name); + } +} + /* ------------------------------------------------------------- */ /* The code below deals with enabling EEH for devices during the * early boot sequence. EEH must be enabled before any PCI probing @@ -977,6 +1087,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_early); void eeh_add_device_late(struct pci_dev *dev) { struct device_node *dn; + struct pci_dn *pdn; if (!dev || !eeh_subsystem_enabled) return; @@ -987,9 +1098,11 @@ void eeh_add_device_late(struct pci_dev *dev) pci_dev_get (dev); dn = pci_device_to_OF_node(dev); - PCI_DN(dn)->pcidev = dev; + pdn = PCI_DN(dn); + pdn->pcidev = dev; pci_addr_cache_insert_device (dev); + eeh_save_bars(dev, pdn); } EXPORT_SYMBOL_GPL(eeh_add_device_late); diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index 930a606b4e35..d86c47872bea 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -64,6 +64,29 @@ extern int pci_read_irq_line(struct pci_dev *pci_dev); */ void rtas_set_slot_reset (struct pci_dn *); +/** + * eeh_restore_bars - Restore device configuration info. + * + * A reset of a PCI device will clear out its config space. + * This routines will restore the config space for this + * device, and is children, to values previously obtained + * from the firmware. + */ +void eeh_restore_bars(struct pci_dn *); + +/** + * rtas_configure_bridge -- firmware initialization of pci bridge + * + * Ask the firmware to configure all PCI bridges devices + * located behind the indicated node. Required after a + * pci device reset. Does essentially the same hing as + * eeh_restore_bars, but for brdges, and lets firmware + * do the work. + */ +void rtas_configure_bridge(struct pci_dn *); + +int rtas_write_config(struct pci_dn *, int where, int size, u32 val); + #endif #endif /* _ASM_POWERPC_PPC_PCI_H */ -- cgit v1.2.3 From 26ef5c09576496dfd08d2b36ec1d08a6f917a0eb Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 10 Nov 2005 11:50:16 +1100 Subject: [PATCH] powerpc: Merge cacheflush.h and cache.h The ppc32 and ppc64 versions of cacheflush.h were almost identical. The two versions of cache.h are fairly similar, except for a bunch of register definitions in the ppc32 version which probably belong better elsewhere. This patch, therefore, merges both headers. Notable points: - there are several functions in cacheflush.h which exist only on ppc32 or only on ppc64. These are handled by #ifdef for now, but these should probably be consolidated, along with the actual code behind them later. - Confusingly, both ppc32 and ppc64 have a flush_dcache_range(), but they're subtly different: it uses dcbf on ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which uses dcbf. These too should be merged and consolidated later. - Also flush_dcache_range() was defined in cacheflush.h on ppc64, and in cache.h on ppc32. In the merged version it's in cacheflush.h - On ppc32 flush_icache_range() is a normal function from misc.S. On ppc64, it was wrapper, testing a feature bit before calling __flush_icache_range() which does the actual flush. This patch takes the ppc64 approach, which amounts to no change on ppc32, since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean renaming flush_icache_range() to __flush_icache_range() in arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S - The PReP register info from asm-ppc/cache.h has moved to arch/ppc/platforms/prep_setup.c - The 8xx register info from asm-ppc/cache.h has moved to a new asm-powerpc/reg_8xx.h, included from reg.h - flush_dcache_all() was defined on ppc32 (only), but was never called (although it was exported). Thus this patch removes it from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely. It's left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c. Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP ARCH=ppc, pmac and CHRP ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built and booted on G5 (ARCH=powerpc) Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/misc_32.S | 23 +---------- arch/ppc/kernel/misc.S | 4 +- arch/ppc/kernel/ppc_ksyms.c | 1 + arch/ppc/platforms/prep_setup.c | 9 +++++ include/asm-powerpc/cache.h | 40 +++++++++++++++++++ include/asm-powerpc/cacheflush.h | 68 ++++++++++++++++++++++++++++++++ include/asm-powerpc/reg.h | 6 ++- include/asm-powerpc/reg_8xx.h | 42 ++++++++++++++++++++ include/asm-ppc/cache.h | 84 ---------------------------------------- include/asm-ppc/cacheflush.h | 49 ----------------------- include/asm-ppc64/cache.h | 36 ----------------- include/asm-ppc64/cacheflush.h | 48 ----------------------- 12 files changed, 168 insertions(+), 242 deletions(-) create mode 100644 include/asm-powerpc/cache.h create mode 100644 include/asm-powerpc/cacheflush.h create mode 100644 include/asm-powerpc/reg_8xx.h delete mode 100644 include/asm-ppc/cache.h delete mode 100644 include/asm-ppc/cacheflush.h delete mode 100644 include/asm-ppc64/cache.h delete mode 100644 include/asm-ppc64/cacheflush.h (limited to 'include') diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 3bedb532aed9..f6d84a75ed26 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -519,7 +519,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) * * flush_icache_range(unsigned long start, unsigned long stop) */ -_GLOBAL(flush_icache_range) +_GLOBAL(__flush_icache_range) BEGIN_FTR_SECTION blr /* for 601, do nothing */ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) @@ -607,27 +607,6 @@ _GLOBAL(invalidate_dcache_range) sync /* wait for dcbi's to get to ram */ blr -#ifdef CONFIG_NOT_COHERENT_CACHE -/* - * 40x cores have 8K or 16K dcache and 32 byte line size. - * 44x has a 32K dcache and 32 byte line size. - * 8xx has 1, 2, 4, 8K variants. - * For now, cover the worst case of the 44x. - * Must be called with external interrupts disabled. - */ -#define CACHE_NWAYS 64 -#define CACHE_NLINES 16 - -_GLOBAL(flush_dcache_all) - li r4, (2 * CACHE_NWAYS * CACHE_NLINES) - mtctr r4 - lis r5, KERNELBASE@h -1: lwz r3, 0(r5) /* Load one word from every line */ - addi r5, r5, L1_CACHE_BYTES - bdnz 1b - blr -#endif /* CONFIG_NOT_COHERENT_CACHE */ - /* * Flush a particular page from the data cache to RAM. * Note: this is necessary because the instruction cache does *not* diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index ae6af29938a1..5e61124581d0 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -497,9 +497,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) * and invalidate the corresponding instruction cache blocks. * This is a no-op on the 601. * - * flush_icache_range(unsigned long start, unsigned long stop) + * __flush_icache_range(unsigned long start, unsigned long stop) */ -_GLOBAL(flush_icache_range) +_GLOBAL(__flush_icache_range) BEGIN_FTR_SECTION blr /* for 601, do nothing */ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 6550de73a855..307077f14936 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -175,6 +175,7 @@ EXPORT_SYMBOL(pci_bus_to_phys); #endif /* CONFIG_PCI */ #ifdef CONFIG_NOT_COHERENT_CACHE +extern void flush_dcache_all(void); EXPORT_SYMBOL(flush_dcache_all); #endif diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index 067d7d53b81e..4415748071dc 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -61,6 +61,15 @@ #include #include +/* prep registers for L2 */ +#define CACHECRBA 0x80000823 /* Cache configuration register address */ +#define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */ +#define L2CACHE_512KB 0x00 /* 512KB */ +#define L2CACHE_256KB 0x01 /* 256KB */ +#define L2CACHE_1MB 0x02 /* 1MB */ +#define L2CACHE_NONE 0x03 /* NONE */ +#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */ + TODC_ALLOC(); unsigned char ucSystemType; diff --git a/include/asm-powerpc/cache.h b/include/asm-powerpc/cache.h new file mode 100644 index 000000000000..26ce502e76e8 --- /dev/null +++ b/include/asm-powerpc/cache.h @@ -0,0 +1,40 @@ +#ifndef _ASM_POWERPC_CACHE_H +#define _ASM_POWERPC_CACHE_H + +#ifdef __KERNEL__ + +#include + +/* bytes per L1 cache line */ +#if defined(CONFIG_8xx) || defined(CONFIG_403GCX) +#define L1_CACHE_SHIFT 4 +#define MAX_COPY_PREFETCH 1 +#elif defined(CONFIG_PPC32) +#define L1_CACHE_SHIFT 5 +#define MAX_COPY_PREFETCH 4 +#else /* CONFIG_PPC64 */ +#define L1_CACHE_SHIFT 7 +#endif + +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define SMP_CACHE_BYTES L1_CACHE_BYTES +#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */ + +#if defined(__powerpc64__) && !defined(__ASSEMBLY__) +struct ppc64_caches { + u32 dsize; /* L1 d-cache size */ + u32 dline_size; /* L1 d-cache line size */ + u32 log_dline_size; + u32 dlines_per_page; + u32 isize; /* L1 i-cache size */ + u32 iline_size; /* L1 i-cache line size */ + u32 log_iline_size; + u32 ilines_per_page; +}; + +extern struct ppc64_caches ppc64_caches; +#endif /* __powerpc64__ && ! __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_CACHE_H */ diff --git a/include/asm-powerpc/cacheflush.h b/include/asm-powerpc/cacheflush.h new file mode 100644 index 000000000000..8a740c88d93d --- /dev/null +++ b/include/asm-powerpc/cacheflush.h @@ -0,0 +1,68 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_CACHEFLUSH_H +#define _ASM_POWERPC_CACHEFLUSH_H + +#ifdef __KERNEL__ + +#include +#include + +/* + * No cache flushing is required when address mappings are changed, + * because the caches on PowerPCs are physically addressed. + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_icache_page(vma, page) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +extern void flush_dcache_page(struct page *page); +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +extern void __flush_icache_range(unsigned long, unsigned long); +static inline void flush_icache_range(unsigned long start, unsigned long stop) +{ + if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) + __flush_icache_range(start, stop); +} + +extern void flush_icache_user_range(struct vm_area_struct *vma, + struct page *page, unsigned long addr, + int len); +extern void __flush_dcache_icache(void *page_va); +extern void flush_dcache_icache_page(struct page *page); +#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE) +extern void __flush_dcache_icache_phys(unsigned long physaddr); +#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */ + +extern void flush_dcache_range(unsigned long start, unsigned long stop); +#ifdef CONFIG_PPC32 +extern void clean_dcache_range(unsigned long start, unsigned long stop); +extern void invalidate_dcache_range(unsigned long start, unsigned long stop); +#endif /* CONFIG_PPC32 */ +#ifdef CONFIG_PPC64 +extern void flush_inval_dcache_range(unsigned long start, unsigned long stop); +extern void flush_dcache_phys_range(unsigned long start, unsigned long stop); +#endif + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + flush_icache_user_range(vma, page, vaddr, len); \ + } while (0) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_CACHEFLUSH_H */ diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index 489cf4c99c21..ef121f4f0bab 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -16,7 +16,11 @@ /* Pickup Book E specific registers. */ #if defined(CONFIG_BOOKE) || defined(CONFIG_40x) #include -#endif +#endif /* CONFIG_BOOKE || CONFIG_40x */ + +#ifdef CONFIG_8xx +#include +#endif /* CONFIG_8xx */ #define MSR_SF_LG 63 /* Enable 64 bit mode */ #define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */ diff --git a/include/asm-powerpc/reg_8xx.h b/include/asm-powerpc/reg_8xx.h new file mode 100644 index 000000000000..e8ea346b21d3 --- /dev/null +++ b/include/asm-powerpc/reg_8xx.h @@ -0,0 +1,42 @@ +/* + * Contains register definitions common to PowerPC 8xx CPUs. Notice + */ +#ifndef _ASM_POWERPC_REG_8xx_H +#define _ASM_POWERPC_REG_8xx_H + +/* Cache control on the MPC8xx is provided through some additional + * special purpose registers. + */ +#define SPRN_IC_CST 560 /* Instruction cache control/status */ +#define SPRN_IC_ADR 561 /* Address needed for some commands */ +#define SPRN_IC_DAT 562 /* Read-only data register */ +#define SPRN_DC_CST 568 /* Data cache control/status */ +#define SPRN_DC_ADR 569 /* Address needed for some commands */ +#define SPRN_DC_DAT 570 /* Read-only data register */ + +/* Commands. Only the first few are available to the instruction cache. +*/ +#define IDC_ENABLE 0x02000000 /* Cache enable */ +#define IDC_DISABLE 0x04000000 /* Cache disable */ +#define IDC_LDLCK 0x06000000 /* Load and lock */ +#define IDC_UNLINE 0x08000000 /* Unlock line */ +#define IDC_UNALL 0x0a000000 /* Unlock all */ +#define IDC_INVALL 0x0c000000 /* Invalidate all */ + +#define DC_FLINE 0x0e000000 /* Flush data cache line */ +#define DC_SFWT 0x01000000 /* Set forced writethrough mode */ +#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */ +#define DC_SLES 0x05000000 /* Set little endian swap mode */ +#define DC_CLES 0x07000000 /* Clear little endian swap mode */ + +/* Status. +*/ +#define IDC_ENABLED 0x80000000 /* Cache is enabled */ +#define IDC_CERR1 0x00200000 /* Cache error 1 */ +#define IDC_CERR2 0x00100000 /* Cache error 2 */ +#define IDC_CERR3 0x00080000 /* Cache error 3 */ + +#define DC_DFWT 0x40000000 /* Data cache is forced write through */ +#define DC_LES 0x20000000 /* Caches are little endian mode */ + +#endif /* _ASM_POWERPC_REG_8xx_H */ diff --git a/include/asm-ppc/cache.h b/include/asm-ppc/cache.h deleted file mode 100644 index 7a157d0f4b5f..000000000000 --- a/include/asm-ppc/cache.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * include/asm-ppc/cache.h - */ -#ifdef __KERNEL__ -#ifndef __ARCH_PPC_CACHE_H -#define __ARCH_PPC_CACHE_H - -#include - -/* bytes per L1 cache line */ -#if defined(CONFIG_8xx) || defined(CONFIG_403GCX) -#define L1_CACHE_SHIFT 4 -#define MAX_COPY_PREFETCH 1 -#elif defined(CONFIG_PPC64BRIDGE) -#define L1_CACHE_SHIFT 7 -#define MAX_COPY_PREFETCH 1 -#else -#define L1_CACHE_SHIFT 5 -#define MAX_COPY_PREFETCH 4 -#endif - -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -#define SMP_CACHE_BYTES L1_CACHE_BYTES -#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */ - -#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)) -#define L1_CACHE_PAGES 8 - -#ifndef __ASSEMBLY__ -extern void clean_dcache_range(unsigned long start, unsigned long stop); -extern void flush_dcache_range(unsigned long start, unsigned long stop); -extern void invalidate_dcache_range(unsigned long start, unsigned long stop); -extern void flush_dcache_all(void); -#endif /* __ASSEMBLY__ */ - -/* prep registers for L2 */ -#define CACHECRBA 0x80000823 /* Cache configuration register address */ -#define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */ -#define L2CACHE_512KB 0x00 /* 512KB */ -#define L2CACHE_256KB 0x01 /* 256KB */ -#define L2CACHE_1MB 0x02 /* 1MB */ -#define L2CACHE_NONE 0x03 /* NONE */ -#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */ - -#ifdef CONFIG_8xx -/* Cache control on the MPC8xx is provided through some additional - * special purpose registers. - */ -#define SPRN_IC_CST 560 /* Instruction cache control/status */ -#define SPRN_IC_ADR 561 /* Address needed for some commands */ -#define SPRN_IC_DAT 562 /* Read-only data register */ -#define SPRN_DC_CST 568 /* Data cache control/status */ -#define SPRN_DC_ADR 569 /* Address needed for some commands */ -#define SPRN_DC_DAT 570 /* Read-only data register */ - -/* Commands. Only the first few are available to the instruction cache. -*/ -#define IDC_ENABLE 0x02000000 /* Cache enable */ -#define IDC_DISABLE 0x04000000 /* Cache disable */ -#define IDC_LDLCK 0x06000000 /* Load and lock */ -#define IDC_UNLINE 0x08000000 /* Unlock line */ -#define IDC_UNALL 0x0a000000 /* Unlock all */ -#define IDC_INVALL 0x0c000000 /* Invalidate all */ - -#define DC_FLINE 0x0e000000 /* Flush data cache line */ -#define DC_SFWT 0x01000000 /* Set forced writethrough mode */ -#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */ -#define DC_SLES 0x05000000 /* Set little endian swap mode */ -#define DC_CLES 0x07000000 /* Clear little endian swap mode */ - -/* Status. -*/ -#define IDC_ENABLED 0x80000000 /* Cache is enabled */ -#define IDC_CERR1 0x00200000 /* Cache error 1 */ -#define IDC_CERR2 0x00100000 /* Cache error 2 */ -#define IDC_CERR3 0x00080000 /* Cache error 3 */ - -#define DC_DFWT 0x40000000 /* Data cache is forced write through */ -#define DC_LES 0x20000000 /* Caches are little endian mode */ -#endif /* CONFIG_8xx */ - -#endif -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/cacheflush.h b/include/asm-ppc/cacheflush.h deleted file mode 100644 index 6a243efb3317..000000000000 --- a/include/asm-ppc/cacheflush.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * include/asm-ppc/cacheflush.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifdef __KERNEL__ -#ifndef _PPC_CACHEFLUSH_H -#define _PPC_CACHEFLUSH_H - -#include - -/* - * No cache flushing is required when address mappings are - * changed, because the caches on PowerPCs are physically - * addressed. -- paulus - * Also, when SMP we use the coherency (M) bit of the - * BATs and PTEs. -- Cort - */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_range(vma, a, b) do { } while (0) -#define flush_cache_page(vma, p, pfn) do { } while (0) -#define flush_icache_page(vma, page) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -extern void flush_dcache_page(struct page *page); -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -extern void flush_icache_range(unsigned long, unsigned long); -extern void flush_icache_user_range(struct vm_area_struct *vma, - struct page *page, unsigned long addr, int len); - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { memcpy(dst, src, len); \ - flush_icache_user_range(vma, page, vaddr, len); \ -} while (0) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -extern void __flush_dcache_icache(void *page_va); -extern void __flush_dcache_icache_phys(unsigned long physaddr); -extern void flush_dcache_icache_page(struct page *page); -#endif /* _PPC_CACHEFLUSH_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc64/cache.h b/include/asm-ppc64/cache.h deleted file mode 100644 index 92140a7efbd1..000000000000 --- a/include/asm-ppc64/cache.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ARCH_PPC64_CACHE_H -#define __ARCH_PPC64_CACHE_H - -#include - -/* bytes per L1 cache line */ -#define L1_CACHE_SHIFT 7 -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -#define SMP_CACHE_BYTES L1_CACHE_BYTES -#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */ - -#ifndef __ASSEMBLY__ - -struct ppc64_caches { - u32 dsize; /* L1 d-cache size */ - u32 dline_size; /* L1 d-cache line size */ - u32 log_dline_size; - u32 dlines_per_page; - u32 isize; /* L1 i-cache size */ - u32 iline_size; /* L1 i-cache line size */ - u32 log_iline_size; - u32 ilines_per_page; -}; - -extern struct ppc64_caches ppc64_caches; - -#endif - -#endif diff --git a/include/asm-ppc64/cacheflush.h b/include/asm-ppc64/cacheflush.h deleted file mode 100644 index ffbc08be8e52..000000000000 --- a/include/asm-ppc64/cacheflush.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef _PPC64_CACHEFLUSH_H -#define _PPC64_CACHEFLUSH_H - -#include -#include - -/* - * No cache flushing is required when address mappings are - * changed, because the caches on PowerPCs are physically - * addressed. - */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_icache_page(vma, page) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -extern void flush_dcache_page(struct page *page); -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -extern void __flush_icache_range(unsigned long, unsigned long); -extern void flush_icache_user_range(struct vm_area_struct *vma, - struct page *page, unsigned long addr, - int len); - -extern void flush_dcache_range(unsigned long start, unsigned long stop); -extern void flush_dcache_phys_range(unsigned long start, unsigned long stop); -extern void flush_inval_dcache_range(unsigned long start, unsigned long stop); - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { memcpy(dst, src, len); \ - flush_icache_user_range(vma, page, vaddr, len); \ -} while (0) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -extern void __flush_dcache_icache(void *page_va); - -static inline void flush_icache_range(unsigned long start, unsigned long stop) -{ - if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) - __flush_icache_range(start, stop); -} - -#endif /* _PPC64_CACHEFLUSH_H */ -- cgit v1.2.3 From 3ddfbcf19b15ccd25a0b4b2dc2e38000e08de739 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 10 Nov 2005 12:56:55 +1100 Subject: [PATCH] powerpc: Consolidate asm compatibility macros This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/fpu.S | 24 ++--- arch/powerpc/platforms/iseries/misc.S | 1 + arch/powerpc/xmon/setjmp.S | 176 +++++++++++++++++----------------- arch/ppc/boot/openfirmware/Makefile | 3 +- include/asm-powerpc/asm-compat.h | 55 +++++++++++ include/asm-powerpc/atomic.h | 10 +- include/asm-powerpc/bitops.h | 41 ++++---- include/asm-powerpc/bug.h | 19 ++-- include/asm-powerpc/cputable.h | 2 +- include/asm-powerpc/futex.h | 5 +- include/asm-powerpc/ppc_asm.h | 39 ++------ include/asm-powerpc/system.h | 1 - include/asm-powerpc/uaccess.h | 40 ++++---- include/asm-ppc64/mmu.h | 2 +- include/asm-ppc64/page.h | 2 +- 15 files changed, 210 insertions(+), 210 deletions(-) create mode 100644 include/asm-powerpc/asm-compat.h (limited to 'include') diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 4d6001fa1cf2..b780b42c95fc 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -41,20 +41,20 @@ _GLOBAL(load_up_fpu) #ifndef CONFIG_SMP LOADBASE(r3, last_task_used_math) toreal(r3) - LDL r4,OFF(last_task_used_math)(r3) - CMPI 0,r4,0 + PPC_LL r4,OFF(last_task_used_math)(r3) + PPC_LCMPI 0,r4,0 beq 1f toreal(r4) addi r4,r4,THREAD /* want last_task_used_math->thread */ SAVE_32FPRS(0, r4) mffs fr0 stfd fr0,THREAD_FPSCR(r4) - LDL r5,PT_REGS(r4) + PPC_LL r5,PT_REGS(r4) toreal(r5) - LDL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) li r10,MSR_FP|MSR_FE0|MSR_FE1 andc r4,r4,r10 /* disable FP for previous task */ - STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: #endif /* CONFIG_SMP */ /* enable use of FP after return */ @@ -77,7 +77,7 @@ _GLOBAL(load_up_fpu) #ifndef CONFIG_SMP subi r4,r5,THREAD fromreal(r4) - STL r4,OFF(last_task_used_math)(r3) + PPC_STL r4,OFF(last_task_used_math)(r3) #endif /* CONFIG_SMP */ /* restore registers and return */ /* we haven't used ctr or xer or lr */ @@ -97,24 +97,24 @@ _GLOBAL(giveup_fpu) MTMSRD(r5) /* enable use of fpu now */ SYNC_601 isync - CMPI 0,r3,0 + PPC_LCMPI 0,r3,0 beqlr- /* if no previous owner, done */ addi r3,r3,THREAD /* want THREAD of task */ - LDL r5,PT_REGS(r3) - CMPI 0,r5,0 + PPC_LL r5,PT_REGS(r3) + PPC_LCMPI 0,r5,0 SAVE_32FPRS(0, r3) mffs fr0 stfd fr0,THREAD_FPSCR(r3) beq 1f - LDL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) li r3,MSR_FP|MSR_FE0|MSR_FE1 andc r4,r4,r3 /* disable FP for previous task */ - STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: #ifndef CONFIG_SMP li r5,0 LOADBASE(r4,last_task_used_math) - STL r5,OFF(last_task_used_math)(r4) + PPC_STL r5,OFF(last_task_used_math)(r4) #endif /* CONFIG_SMP */ blr diff --git a/arch/powerpc/platforms/iseries/misc.S b/arch/powerpc/platforms/iseries/misc.S index 09f14522e176..dfe7aa1ba098 100644 --- a/arch/powerpc/platforms/iseries/misc.S +++ b/arch/powerpc/platforms/iseries/misc.S @@ -15,6 +15,7 @@ #include #include +#include .text diff --git a/arch/powerpc/xmon/setjmp.S b/arch/powerpc/xmon/setjmp.S index f8e40dfd2bff..96a91f10e2ec 100644 --- a/arch/powerpc/xmon/setjmp.S +++ b/arch/powerpc/xmon/setjmp.S @@ -14,61 +14,61 @@ _GLOBAL(xmon_setjmp) mflr r0 - STL r0,0(r3) - STL r1,SZL(r3) - STL r2,2*SZL(r3) + PPC_STL r0,0(r3) + PPC_STL r1,SZL(r3) + PPC_STL r2,2*SZL(r3) mfcr r0 - STL r0,3*SZL(r3) - STL r13,4*SZL(r3) - STL r14,5*SZL(r3) - STL r15,6*SZL(r3) - STL r16,7*SZL(r3) - STL r17,8*SZL(r3) - STL r18,9*SZL(r3) - STL r19,10*SZL(r3) - STL r20,11*SZL(r3) - STL r21,12*SZL(r3) - STL r22,13*SZL(r3) - STL r23,14*SZL(r3) - STL r24,15*SZL(r3) - STL r25,16*SZL(r3) - STL r26,17*SZL(r3) - STL r27,18*SZL(r3) - STL r28,19*SZL(r3) - STL r29,20*SZL(r3) - STL r30,21*SZL(r3) - STL r31,22*SZL(r3) + PPC_STL r0,3*SZL(r3) + PPC_STL r13,4*SZL(r3) + PPC_STL r14,5*SZL(r3) + PPC_STL r15,6*SZL(r3) + PPC_STL r16,7*SZL(r3) + PPC_STL r17,8*SZL(r3) + PPC_STL r18,9*SZL(r3) + PPC_STL r19,10*SZL(r3) + PPC_STL r20,11*SZL(r3) + PPC_STL r21,12*SZL(r3) + PPC_STL r22,13*SZL(r3) + PPC_STL r23,14*SZL(r3) + PPC_STL r24,15*SZL(r3) + PPC_STL r25,16*SZL(r3) + PPC_STL r26,17*SZL(r3) + PPC_STL r27,18*SZL(r3) + PPC_STL r28,19*SZL(r3) + PPC_STL r29,20*SZL(r3) + PPC_STL r30,21*SZL(r3) + PPC_STL r31,22*SZL(r3) li r3,0 blr _GLOBAL(xmon_longjmp) - CMPI r4,0 + PPC_LCMPI r4,0 bne 1f li r4,1 -1: LDL r13,4*SZL(r3) - LDL r14,5*SZL(r3) - LDL r15,6*SZL(r3) - LDL r16,7*SZL(r3) - LDL r17,8*SZL(r3) - LDL r18,9*SZL(r3) - LDL r19,10*SZL(r3) - LDL r20,11*SZL(r3) - LDL r21,12*SZL(r3) - LDL r22,13*SZL(r3) - LDL r23,14*SZL(r3) - LDL r24,15*SZL(r3) - LDL r25,16*SZL(r3) - LDL r26,17*SZL(r3) - LDL r27,18*SZL(r3) - LDL r28,19*SZL(r3) - LDL r29,20*SZL(r3) - LDL r30,21*SZL(r3) - LDL r31,22*SZL(r3) - LDL r0,3*SZL(r3) +1: PPC_LL r13,4*SZL(r3) + PPC_LL r14,5*SZL(r3) + PPC_LL r15,6*SZL(r3) + PPC_LL r16,7*SZL(r3) + PPC_LL r17,8*SZL(r3) + PPC_LL r18,9*SZL(r3) + PPC_LL r19,10*SZL(r3) + PPC_LL r20,11*SZL(r3) + PPC_LL r21,12*SZL(r3) + PPC_LL r22,13*SZL(r3) + PPC_LL r23,14*SZL(r3) + PPC_LL r24,15*SZL(r3) + PPC_LL r25,16*SZL(r3) + PPC_LL r26,17*SZL(r3) + PPC_LL r27,18*SZL(r3) + PPC_LL r28,19*SZL(r3) + PPC_LL r29,20*SZL(r3) + PPC_LL r30,21*SZL(r3) + PPC_LL r31,22*SZL(r3) + PPC_LL r0,3*SZL(r3) mtcrf 0x38,r0 - LDL r0,0(r3) - LDL r1,SZL(r3) - LDL r2,2*SZL(r3) + PPC_LL r0,0(r3) + PPC_LL r1,SZL(r3) + PPC_LL r2,2*SZL(r3) mtlr r0 mr r3,r4 blr @@ -84,52 +84,52 @@ _GLOBAL(xmon_longjmp) * different ABIs, though). */ _GLOBAL(xmon_save_regs) - STL r0,0*SZL(r3) - STL r2,2*SZL(r3) - STL r3,3*SZL(r3) - STL r4,4*SZL(r3) - STL r5,5*SZL(r3) - STL r6,6*SZL(r3) - STL r7,7*SZL(r3) - STL r8,8*SZL(r3) - STL r9,9*SZL(r3) - STL r10,10*SZL(r3) - STL r11,11*SZL(r3) - STL r12,12*SZL(r3) - STL r13,13*SZL(r3) - STL r14,14*SZL(r3) - STL r15,15*SZL(r3) - STL r16,16*SZL(r3) - STL r17,17*SZL(r3) - STL r18,18*SZL(r3) - STL r19,19*SZL(r3) - STL r20,20*SZL(r3) - STL r21,21*SZL(r3) - STL r22,22*SZL(r3) - STL r23,23*SZL(r3) - STL r24,24*SZL(r3) - STL r25,25*SZL(r3) - STL r26,26*SZL(r3) - STL r27,27*SZL(r3) - STL r28,28*SZL(r3) - STL r29,29*SZL(r3) - STL r30,30*SZL(r3) - STL r31,31*SZL(r3) + PPC_STL r0,0*SZL(r3) + PPC_STL r2,2*SZL(r3) + PPC_STL r3,3*SZL(r3) + PPC_STL r4,4*SZL(r3) + PPC_STL r5,5*SZL(r3) + PPC_STL r6,6*SZL(r3) + PPC_STL r7,7*SZL(r3) + PPC_STL r8,8*SZL(r3) + PPC_STL r9,9*SZL(r3) + PPC_STL r10,10*SZL(r3) + PPC_STL r11,11*SZL(r3) + PPC_STL r12,12*SZL(r3) + PPC_STL r13,13*SZL(r3) + PPC_STL r14,14*SZL(r3) + PPC_STL r15,15*SZL(r3) + PPC_STL r16,16*SZL(r3) + PPC_STL r17,17*SZL(r3) + PPC_STL r18,18*SZL(r3) + PPC_STL r19,19*SZL(r3) + PPC_STL r20,20*SZL(r3) + PPC_STL r21,21*SZL(r3) + PPC_STL r22,22*SZL(r3) + PPC_STL r23,23*SZL(r3) + PPC_STL r24,24*SZL(r3) + PPC_STL r25,25*SZL(r3) + PPC_STL r26,26*SZL(r3) + PPC_STL r27,27*SZL(r3) + PPC_STL r28,28*SZL(r3) + PPC_STL r29,29*SZL(r3) + PPC_STL r30,30*SZL(r3) + PPC_STL r31,31*SZL(r3) /* go up one stack frame for SP */ - LDL r4,0(r1) - STL r4,1*SZL(r3) + PPC_LL r4,0(r1) + PPC_STL r4,1*SZL(r3) /* get caller's LR */ - LDL r0,LRSAVE(r4) - STL r0,_NIP-STACK_FRAME_OVERHEAD(r3) - STL r0,_LINK-STACK_FRAME_OVERHEAD(r3) + PPC_LL r0,LRSAVE(r4) + PPC_STL r0,_NIP-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_LINK-STACK_FRAME_OVERHEAD(r3) mfmsr r0 - STL r0,_MSR-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_MSR-STACK_FRAME_OVERHEAD(r3) mfctr r0 - STL r0,_CTR-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_CTR-STACK_FRAME_OVERHEAD(r3) mfxer r0 - STL r0,_XER-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_XER-STACK_FRAME_OVERHEAD(r3) mfcr r0 - STL r0,_CCR-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_CCR-STACK_FRAME_OVERHEAD(r3) li r0,0 - STL r0,_TRAP-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_TRAP-STACK_FRAME_OVERHEAD(r3) blr diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile index 03415238fabf..83a6433459ce 100644 --- a/arch/ppc/boot/openfirmware/Makefile +++ b/arch/ppc/boot/openfirmware/Makefile @@ -80,8 +80,7 @@ $(obj)/note: $(utils)/mknote FORCE $(call if_changed,mknote) -$(obj)/coffcrt0.o: EXTRA_AFLAGS := -traditional -DXCOFF -$(obj)/crt0.o: EXTRA_AFLAGS := -traditional +$(obj)/coffcrt0.o: EXTRA_AFLAGS := -DXCOFF targets += coffcrt0.o crt0.o $(obj)/coffcrt0.o $(obj)/crt0.o: $(common)/crt0.S FORCE $(call if_changed_dep,as_o_S) diff --git a/include/asm-powerpc/asm-compat.h b/include/asm-powerpc/asm-compat.h new file mode 100644 index 000000000000..8b133efc9f79 --- /dev/null +++ b/include/asm-powerpc/asm-compat.h @@ -0,0 +1,55 @@ +#ifndef _ASM_POWERPC_ASM_COMPAT_H +#define _ASM_POWERPC_ASM_COMPAT_H + +#include +#include + +#ifdef __ASSEMBLY__ +# define stringify_in_c(...) __VA_ARGS__ +# define ASM_CONST(x) x +#else +/* This version of stringify will deal with commas... */ +# define __stringify_in_c(...) #__VA_ARGS__ +# define stringify_in_c(...) __stringify_in_c(__VA_ARGS__) " " +# define __ASM_CONST(x) x##UL +# define ASM_CONST(x) __ASM_CONST(x) +#endif + +#ifdef __powerpc64__ + +/* operations for longs and pointers */ +#define PPC_LL stringify_in_c(ld) +#define PPC_STL stringify_in_c(std) +#define PPC_LCMPI stringify_in_c(cmpdi) +#define PPC_LONG stringify_in_c(.llong) +#define PPC_TLNEI stringify_in_c(tdnei) +#define PPC_LLARX stringify_in_c(ldarx) +#define PPC_STLCX stringify_in_c(stdcx.) +#define PPC_CNTLZL stringify_in_c(cntlzd) + +#else /* 32-bit */ + +/* operations for longs and pointers */ +#define PPC_LL stringify_in_c(lwz) +#define PPC_STL stringify_in_c(stw) +#define PPC_LCMPI stringify_in_c(cmpwi) +#define PPC_LONG stringify_in_c(.long) +#define PPC_TLNEI stringify_in_c(twnei) +#define PPC_LLARX stringify_in_c(lwarx) +#define PPC_STLCX stringify_in_c(stwcx.) +#define PPC_CNTLZL stringify_in_c(cntlzw) + +#endif + +#ifdef CONFIG_IBM405_ERR77 +/* Erratum #77 on the 405 means we need a sync or dcbt before every + * stwcx. The old ATOMIC_SYNC_FIX covered some but not all of this. + */ +#define PPC405_ERR77(ra,rb) stringify_in_c(dcbt ra, rb;) +#define PPC405_ERR77_SYNC stringify_in_c(sync;) +#else +#define PPC405_ERR77(ra,rb) +#define PPC405_ERR77_SYNC +#endif + +#endif /* _ASM_POWERPC_ASM_COMPAT_H */ diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h index ed4b345ed75d..c5b12fd2b46b 100644 --- a/include/asm-powerpc/atomic.h +++ b/include/asm-powerpc/atomic.h @@ -9,21 +9,13 @@ typedef struct { volatile int counter; } atomic_t; #ifdef __KERNEL__ #include +#include #define ATOMIC_INIT(i) { (i) } #define atomic_read(v) ((v)->counter) #define atomic_set(v,i) (((v)->counter) = (i)) -/* Erratum #77 on the 405 means we need a sync or dcbt before every stwcx. - * The old ATOMIC_SYNC_FIX covered some but not all of this. - */ -#ifdef CONFIG_IBM405_ERR77 -#define PPC405_ERR77(ra,rb) "dcbt " #ra "," #rb ";" -#else -#define PPC405_ERR77(ra,rb) -#endif - static __inline__ void atomic_add(int a, atomic_t *v) { int t; diff --git a/include/asm-powerpc/bitops.h b/include/asm-powerpc/bitops.h index dc25c53704d5..5727229b0444 100644 --- a/include/asm-powerpc/bitops.h +++ b/include/asm-powerpc/bitops.h @@ -40,6 +40,7 @@ #include #include +#include #include /* @@ -52,16 +53,6 @@ #define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) #define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7) -#ifdef CONFIG_PPC64 -#define LARXL "ldarx" -#define STCXL "stdcx." -#define CNTLZL "cntlzd" -#else -#define LARXL "lwarx" -#define STCXL "stwcx." -#define CNTLZL "cntlzw" -#endif - static __inline__ void set_bit(int nr, volatile unsigned long *addr) { unsigned long old; @@ -69,10 +60,10 @@ static __inline__ void set_bit(int nr, volatile unsigned long *addr) unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); __asm__ __volatile__( -"1:" LARXL " %0,0,%3 # set_bit\n" +"1:" PPC_LLARX "%0,0,%3 # set_bit\n" "or %0,%0,%2\n" PPC405_ERR77(0,%3) - STCXL " %0,0,%3\n" + PPC_STLCX "%0,0,%3\n" "bne- 1b" : "=&r"(old), "=m"(*p) : "r"(mask), "r"(p), "m"(*p) @@ -86,10 +77,10 @@ static __inline__ void clear_bit(int nr, volatile unsigned long *addr) unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); __asm__ __volatile__( -"1:" LARXL " %0,0,%3 # set_bit\n" +"1:" PPC_LLARX "%0,0,%3 # clear_bit\n" "andc %0,%0,%2\n" PPC405_ERR77(0,%3) - STCXL " %0,0,%3\n" + PPC_STLCX "%0,0,%3\n" "bne- 1b" : "=&r"(old), "=m"(*p) : "r"(mask), "r"(p), "m"(*p) @@ -103,10 +94,10 @@ static __inline__ void change_bit(int nr, volatile unsigned long *addr) unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); __asm__ __volatile__( -"1:" LARXL " %0,0,%3 # set_bit\n" +"1:" PPC_LLARX "%0,0,%3 # change_bit\n" "xor %0,%0,%2\n" PPC405_ERR77(0,%3) - STCXL " %0,0,%3\n" + PPC_STLCX "%0,0,%3\n" "bne- 1b" : "=&r"(old), "=m"(*p) : "r"(mask), "r"(p), "m"(*p) @@ -122,10 +113,10 @@ static __inline__ int test_and_set_bit(unsigned long nr, __asm__ __volatile__( EIEIO_ON_SMP -"1:" LARXL " %0,0,%3 # test_and_set_bit\n" +"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit\n" "or %1,%0,%2 \n" PPC405_ERR77(0,%3) - STCXL " %1,0,%3 \n" + PPC_STLCX "%1,0,%3 \n" "bne- 1b" ISYNC_ON_SMP : "=&r" (old), "=&r" (t) @@ -144,10 +135,10 @@ static __inline__ int test_and_clear_bit(unsigned long nr, __asm__ __volatile__( EIEIO_ON_SMP -"1:" LARXL " %0,0,%3 # test_and_clear_bit\n" +"1:" PPC_LLARX "%0,0,%3 # test_and_clear_bit\n" "andc %1,%0,%2 \n" PPC405_ERR77(0,%3) - STCXL " %1,0,%3 \n" + PPC_STLCX "%1,0,%3 \n" "bne- 1b" ISYNC_ON_SMP : "=&r" (old), "=&r" (t) @@ -166,10 +157,10 @@ static __inline__ int test_and_change_bit(unsigned long nr, __asm__ __volatile__( EIEIO_ON_SMP -"1:" LARXL " %0,0,%3 # test_and_change_bit\n" +"1:" PPC_LLARX "%0,0,%3 # test_and_change_bit\n" "xor %1,%0,%2 \n" PPC405_ERR77(0,%3) - STCXL " %1,0,%3 \n" + PPC_STLCX "%1,0,%3 \n" "bne- 1b" ISYNC_ON_SMP : "=&r" (old), "=&r" (t) @@ -184,9 +175,9 @@ static __inline__ void set_bits(unsigned long mask, unsigned long *addr) unsigned long old; __asm__ __volatile__( -"1:" LARXL " %0,0,%3 # set_bit\n" +"1:" PPC_LLARX "%0,0,%3 # set_bits\n" "or %0,%0,%2\n" - STCXL " %0,0,%3\n" + PPC_STLCX "%0,0,%3\n" "bne- 1b" : "=&r" (old), "=m" (*addr) : "r" (mask), "r" (addr), "m" (*addr) @@ -268,7 +259,7 @@ static __inline__ int __ilog2(unsigned long x) { int lz; - asm (CNTLZL " %0,%1" : "=r" (lz) : "r" (x)); + asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (x)); return BITS_PER_LONG - 1 - lz; } diff --git a/include/asm-powerpc/bug.h b/include/asm-powerpc/bug.h index d625ee55f957..b001ecb3cd99 100644 --- a/include/asm-powerpc/bug.h +++ b/include/asm-powerpc/bug.h @@ -1,6 +1,7 @@ #ifndef _ASM_POWERPC_BUG_H #define _ASM_POWERPC_BUG_H +#include /* * Define an illegal instr to trap on the bug. * We don't use 0 because that marks the end of a function @@ -11,14 +12,6 @@ #ifndef __ASSEMBLY__ -#ifdef __powerpc64__ -#define BUG_TABLE_ENTRY ".llong" -#define BUG_TRAP_OP "tdnei" -#else -#define BUG_TABLE_ENTRY ".long" -#define BUG_TRAP_OP "twnei" -#endif /* __powerpc64__ */ - struct bug_entry { unsigned long bug_addr; long line; @@ -40,16 +33,16 @@ struct bug_entry *find_bug(unsigned long bugaddr); __asm__ __volatile__( \ "1: twi 31,0,0\n" \ ".section __bug_table,\"a\"\n" \ - "\t"BUG_TABLE_ENTRY" 1b,%0,%1,%2\n" \ + "\t"PPC_LONG" 1b,%0,%1,%2\n" \ ".previous" \ : : "i" (__LINE__), "i" (__FILE__), "i" (__FUNCTION__)); \ } while (0) #define BUG_ON(x) do { \ __asm__ __volatile__( \ - "1: "BUG_TRAP_OP" %0,0\n" \ + "1: "PPC_TLNEI" %0,0\n" \ ".section __bug_table,\"a\"\n" \ - "\t"BUG_TABLE_ENTRY" 1b,%1,%2,%3\n" \ + "\t"PPC_LONG" 1b,%1,%2,%3\n" \ ".previous" \ : : "r" ((long)(x)), "i" (__LINE__), \ "i" (__FILE__), "i" (__FUNCTION__)); \ @@ -57,9 +50,9 @@ struct bug_entry *find_bug(unsigned long bugaddr); #define WARN_ON(x) do { \ __asm__ __volatile__( \ - "1: "BUG_TRAP_OP" %0,0\n" \ + "1: "PPC_TLNEI" %0,0\n" \ ".section __bug_table,\"a\"\n" \ - "\t"BUG_TABLE_ENTRY" 1b,%1,%2,%3\n" \ + "\t"PPC_LONG" 1b,%1,%2,%3\n" \ ".previous" \ : : "r" ((long)(x)), \ "i" (__LINE__ + BUG_WARNING_TRAP), \ diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 79a0556a0ab8..f89fd883e892 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -2,7 +2,7 @@ #define __ASM_POWERPC_CPUTABLE_H #include -#include /* for ASM_CONST */ +#include #define PPC_FEATURE_32 0x80000000 #define PPC_FEATURE_64 0x40000000 diff --git a/include/asm-powerpc/futex.h b/include/asm-powerpc/futex.h index 37c94e52ab6d..f0319d50b129 100644 --- a/include/asm-powerpc/futex.h +++ b/include/asm-powerpc/futex.h @@ -7,13 +7,14 @@ #include #include #include -#include +#include #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ __asm__ __volatile ( \ SYNC_ON_SMP \ "1: lwarx %0,0,%2\n" \ insn \ + PPC405_ERR77(0, %2) \ "2: stwcx. %1,0,%2\n" \ "bne- 1b\n" \ "li %1,0\n" \ @@ -23,7 +24,7 @@ ".previous\n" \ ".section __ex_table,\"a\"\n" \ ".align 3\n" \ - DATAL " 1b,4b,2b,4b\n" \ + PPC_LONG "1b,4b,2b,4b\n" \ ".previous" \ : "=&r" (oldval), "=&r" (ret) \ : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \ diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h index c534ca41224b..c27baa0563fe 100644 --- a/include/asm-powerpc/ppc_asm.h +++ b/include/asm-powerpc/ppc_asm.h @@ -6,8 +6,13 @@ #include #include +#include -#ifdef __ASSEMBLY__ +#ifndef __ASSEMBLY__ +#error __FILE__ should only be used in assembler files +#else + +#define SZL (BITS_PER_LONG/8) /* * Macros for storing registers into and loading registers from @@ -184,12 +189,6 @@ n: oris reg,reg,(label)@h; \ ori reg,reg,(label)@l; -/* operations for longs and pointers */ -#define LDL ld -#define STL std -#define CMPI cmpdi -#define SZL 8 - /* offsets for stack frame layout */ #define LRSAVE 16 @@ -203,12 +202,6 @@ n: #define OFF(name) name@l -/* operations for longs and pointers */ -#define LDL lwz -#define STL stw -#define CMPI cmpwi -#define SZL 4 - /* offsets for stack frame layout */ #define LRSAVE 4 @@ -266,15 +259,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) #endif -#ifdef CONFIG_IBM405_ERR77 -#define PPC405_ERR77(ra,rb) dcbt ra, rb; -#define PPC405_ERR77_SYNC sync; -#else -#define PPC405_ERR77(ra,rb) -#define PPC405_ERR77_SYNC -#endif - - #ifdef CONFIG_IBM440EP_ERR42 #define PPC440EP_ERR42 isync #else @@ -502,17 +486,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) #define N_SLINE 68 #define N_SO 100 -#define ASM_CONST(x) x -#else - #define __ASM_CONST(x) x##UL - #define ASM_CONST(x) __ASM_CONST(x) - -#ifdef CONFIG_PPC64 -#define DATAL ".llong" -#else -#define DATAL ".long" -#endif - #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_PPC_ASM_H */ diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 3536a5cd7a2d..f0cce5a30235 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -8,7 +8,6 @@ #include #include -#include #include /* diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h index 33af730f0d19..3872e924cdd6 100644 --- a/include/asm-powerpc/uaccess.h +++ b/include/asm-powerpc/uaccess.h @@ -120,14 +120,6 @@ struct exception_table_entry { extern long __put_user_bad(void); -#ifdef __powerpc64__ -#define __EX_TABLE_ALIGN "3" -#define __EX_TABLE_TYPE "llong" -#else -#define __EX_TABLE_ALIGN "2" -#define __EX_TABLE_TYPE "long" -#endif - /* * We don't tell gcc that we are accessing memory, but this is OK * because we do not write to any memory gcc knows about, so there @@ -142,11 +134,12 @@ extern long __put_user_bad(void); " b 2b\n" \ ".previous\n" \ ".section __ex_table,\"a\"\n" \ - " .align " __EX_TABLE_ALIGN "\n" \ - " ."__EX_TABLE_TYPE" 1b,3b\n" \ + " .balign %5\n" \ + PPC_LONG "1b,3b\n" \ ".previous" \ : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) + : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err),\ + "i"(sizeof(unsigned long))) #ifdef __powerpc64__ #define __put_user_asm2(x, ptr, retval) \ @@ -162,12 +155,13 @@ extern long __put_user_bad(void); " b 3b\n" \ ".previous\n" \ ".section __ex_table,\"a\"\n" \ - " .align " __EX_TABLE_ALIGN "\n" \ - " ." __EX_TABLE_TYPE " 1b,4b\n" \ - " ." __EX_TABLE_TYPE " 2b,4b\n" \ + " .balign %5\n" \ + PPC_LONG "1b,4b\n" \ + PPC_LONG "2b,4b\n" \ ".previous" \ : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) + : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err),\ + "i"(sizeof(unsigned long))) #endif /* __powerpc64__ */ #define __put_user_size(x, ptr, size, retval) \ @@ -213,11 +207,12 @@ extern long __get_user_bad(void); " b 2b\n" \ ".previous\n" \ ".section __ex_table,\"a\"\n" \ - " .align "__EX_TABLE_ALIGN "\n" \ - " ." __EX_TABLE_TYPE " 1b,3b\n" \ + " .balign %5\n" \ + PPC_LONG "1b,3b\n" \ ".previous" \ : "=r" (err), "=r" (x) \ - : "b" (addr), "i" (-EFAULT), "0" (err)) + : "b" (addr), "i" (-EFAULT), "0" (err), \ + "i"(sizeof(unsigned long))) #ifdef __powerpc64__ #define __get_user_asm2(x, addr, err) \ @@ -235,12 +230,13 @@ extern long __get_user_bad(void); " b 3b\n" \ ".previous\n" \ ".section __ex_table,\"a\"\n" \ - " .align " __EX_TABLE_ALIGN "\n" \ - " ." __EX_TABLE_TYPE " 1b,4b\n" \ - " ." __EX_TABLE_TYPE " 2b,4b\n" \ + " .balign %5\n" \ + PPC_LONG "1b,4b\n" \ + PPC_LONG "2b,4b\n" \ ".previous" \ : "=r" (err), "=&r" (x) \ - : "b" (addr), "i" (-EFAULT), "0" (err)) + : "b" (addr), "i" (-EFAULT), "0" (err), \ + "i"(sizeof(unsigned long))) #endif /* __powerpc64__ */ #define __get_user_size(x, ptr, size, retval) \ diff --git a/include/asm-ppc64/mmu.h b/include/asm-ppc64/mmu.h index 4c18a5cb69f5..d50997bace1c 100644 --- a/include/asm-ppc64/mmu.h +++ b/include/asm-ppc64/mmu.h @@ -14,7 +14,7 @@ #define _PPC64_MMU_H_ #include -#include /* for ASM_CONST */ +#include #include /* diff --git a/include/asm-ppc64/page.h b/include/asm-ppc64/page.h index 82ce187e5be8..e32f1187aa29 100644 --- a/include/asm-ppc64/page.h +++ b/include/asm-ppc64/page.h @@ -11,7 +11,7 @@ */ #include -#include /* for ASM_CONST */ +#include /* * We support either 4k or 64k software page size. When using 64k pages -- cgit v1.2.3 From 799d6046d3fb557006e6d7c9767fdb96479b0e0a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 10 Nov 2005 13:37:51 +1100 Subject: [PATCH] powerpc: merge code values for identifying platforms This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/asm-offsets.c | 1 - arch/powerpc/kernel/head_64.S | 91 +++---------------------------- arch/powerpc/kernel/paca.c | 5 +- arch/powerpc/kernel/ppc_ksyms.c | 3 - arch/powerpc/kernel/prom.c | 16 ++---- arch/powerpc/kernel/prom_init.c | 8 +-- arch/powerpc/kernel/rtas-proc.c | 2 +- arch/powerpc/kernel/rtas.c | 5 +- arch/powerpc/kernel/setup-common.c | 12 +++- arch/powerpc/kernel/setup_32.c | 2 - arch/powerpc/kernel/setup_64.c | 65 +++++++++++++++------- arch/powerpc/kernel/smp.c | 5 +- arch/powerpc/kernel/sys_ppc32.c | 1 - arch/powerpc/kernel/time.c | 29 +++++----- arch/powerpc/kernel/traps.c | 2 +- arch/powerpc/mm/hash_utils_64.c | 29 +++++++--- arch/powerpc/mm/stab.c | 21 ++++++- arch/powerpc/oprofile/op_model_power4.c | 3 +- arch/powerpc/platforms/iseries/setup.c | 23 +++++--- arch/powerpc/platforms/pseries/eeh.c | 3 +- arch/powerpc/platforms/pseries/iommu.c | 3 +- arch/powerpc/platforms/pseries/pci.c | 2 +- arch/powerpc/platforms/pseries/reconfig.c | 2 +- arch/powerpc/platforms/pseries/rtasd.c | 8 ++- arch/powerpc/platforms/pseries/setup.c | 8 +-- arch/powerpc/platforms/pseries/smp.c | 5 +- arch/powerpc/platforms/pseries/xics.c | 6 +- arch/ppc/kernel/ppc_ksyms.c | 3 - arch/ppc/kernel/setup.c | 1 + arch/ppc64/kernel/asm-offsets.c | 1 - arch/ppc64/kernel/head.S | 84 +--------------------------- arch/ppc64/kernel/idle.c | 1 - arch/ppc64/kernel/lparcfg.c | 3 +- arch/ppc64/kernel/nvram.c | 5 +- arch/ppc64/kernel/pci.c | 5 +- arch/ppc64/kernel/proc_ppc64.c | 4 +- arch/ppc64/kernel/prom.c | 9 +-- arch/ppc64/kernel/prom_init.c | 3 +- arch/ppc64/kernel/vdso.c | 5 +- include/asm-powerpc/firmware.h | 6 ++ include/asm-powerpc/processor.h | 71 +++++++++++++----------- include/asm-powerpc/reg.h | 1 + include/asm-powerpc/systemcfg.h | 64 ++++++++++++++++++++++ include/asm-ppc64/mmu.h | 3 + include/asm-ppc64/systemcfg.h | 64 ---------------------- 45 files changed, 298 insertions(+), 395 deletions(-) create mode 100644 include/asm-powerpc/systemcfg.h delete mode 100644 include/asm-ppc64/systemcfg.h (limited to 'include') diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index b75757251994..8793102711a8 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -106,7 +106,6 @@ int main(void) DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size)); DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size)); DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page)); - DEFINE(PLATFORM, offsetof(struct systemcfg, platform)); DEFINE(PLATFORM_LPAR, PLATFORM_LPAR); /* paca */ diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 16ab40daa738..8a8bf79ef044 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include @@ -1697,25 +1696,14 @@ _GLOBAL(pmac_secondary_start) * SPRG3 = paca virtual address */ _GLOBAL(__secondary_start) + /* Set thread priority to MEDIUM */ + HMT_MEDIUM - HMT_MEDIUM /* Set thread priority to MEDIUM */ - + /* Load TOC */ ld r2,PACATOC(r13) - li r6,0 - stb r6,PACAPROCENABLED(r13) - -#ifndef CONFIG_PPC_ISERIES - /* Initialize the page table pointer register. */ - LOADADDR(r6,_SDR1) - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -#endif - /* Initialize the first segment table (or SLB) entry */ - ld r3,PACASTABVIRT(r13) /* get addr of segment table */ -BEGIN_FTR_SECTION - bl .stab_initialize -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - bl .slb_initialize + + /* Do early setup for that CPU (stab, slb, hash table pointer) */ + bl .early_setup_secondary /* Initialize the kernel stack. Just a repeat for iSeries. */ LOADADDR(r3,current_set) @@ -1724,37 +1712,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD std r1,PACAKSAVE(r13) - ld r3,PACASTABREAL(r13) /* get raddr of segment table */ - ori r4,r3,1 /* turn on valid bit */ - -#ifdef CONFIG_PPC_ISERIES - li r0,-1 /* hypervisor call */ - li r3,1 - sldi r3,r3,63 /* 0x8000000000000000 */ - ori r3,r3,4 /* 0x8000000000000004 */ - sc /* HvCall_setASR */ -#else - /* set the ASR */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: -#endif + /* Clear backchain so we get nice backtraces */ li r7,0 mtlr r7 @@ -1777,6 +1735,7 @@ _GLOBAL(start_secondary_prolog) li r3,0 std r3,0(r1) /* Zero the stack frame pointer */ bl .start_secondary + b . #endif /* @@ -1896,40 +1855,6 @@ _STATIC(start_here_multiplatform) mr r3,r31 bl .early_setup - /* set the ASR */ - ld r3,PACASTABREAL(r13) - ori r4,r3,1 /* turn on valid bit */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: - /* Set SDR1 (hash table pointer) */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - /* Test if bit 0 is set (LPAR bit) */ - andi. r3,r3,PLATFORM_LPAR - bne 98f /* branch if result is !0 */ - LOADADDR(r6,_SDR1) /* Only if NOT LPAR */ - add r6,r6,r26 - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -98: LOADADDR(r3,.start_here_common) SET_REG_TO_CONST(r4, MSR_KERNEL) mtspr SPRN_SRR0,r3 diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 179948eb0580..3cf2517c5f91 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -15,7 +15,7 @@ #include #include #include - +#include #include #include #include @@ -24,8 +24,7 @@ static union { struct systemcfg data; u8 page[PAGE_SIZE]; } systemcfg_store __attribute__((__section__(".data.page.aligned"))); -struct systemcfg *systemcfg = &systemcfg_store.data; -EXPORT_SYMBOL(systemcfg); +struct systemcfg *_systemcfg = &systemcfg_store.data; /* This symbol is provided by the linker - let it fill in the paca diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 5d9fd0369aad..5dcf4ba05ee8 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -188,9 +188,6 @@ EXPORT_SYMBOL(adb_try_handler_change); EXPORT_SYMBOL(cuda_request); EXPORT_SYMBOL(cuda_poll); #endif /* CONFIG_ADB_CUDA */ -#if defined(CONFIG_PPC_MULTIPLATFORM) && defined(CONFIG_PPC32) -EXPORT_SYMBOL(_machine); -#endif #ifdef CONFIG_PPC_PMAC EXPORT_SYMBOL(sys_ctrler); #endif diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 5af39f866735..1bf3642cb859 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -48,9 +48,6 @@ #include #include #include -#ifdef CONFIG_PPC64 -#include -#endif #ifdef DEBUG #define DBG(fmt...) printk(KERN_ERR fmt) @@ -391,7 +388,7 @@ static int __devinit finish_node_interrupts(struct device_node *np, #ifdef CONFIG_PPC64 /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */ - if (systemcfg->platform == PLATFORM_POWERMAC && ic && ic->parent) { + if (_machine == PLATFORM_POWERMAC && ic && ic->parent) { char *name = get_property(ic->parent, "name", NULL); if (name && !strcmp(name, "u3")) np->intrs[intrcount].line += 128; @@ -1161,13 +1158,9 @@ static int __init early_init_dt_scan_chosen(unsigned long node, prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL); if (prop == NULL) return 0; -#ifdef CONFIG_PPC64 - systemcfg->platform = *prop; -#else #ifdef CONFIG_PPC_MULTIPLATFORM _machine = *prop; #endif -#endif #ifdef CONFIG_PPC64 /* check if iommu is forced on or off */ @@ -1346,9 +1339,6 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_memory, NULL); lmb_enforce_memory_limit(memory_limit); lmb_analyze(); -#ifdef CONFIG_PPC64 - systemcfg->physicalMemorySize = lmb_phys_mem_size(); -#endif lmb_reserve(0, __pa(klimit)); DBG("Phys. mem: %lx\n", lmb_phys_mem_size()); @@ -1915,7 +1905,7 @@ static int of_finish_dynamic_node(struct device_node *node, /* We don't support that function on PowerMac, at least * not yet */ - if (systemcfg->platform == PLATFORM_POWERMAC) + if (_machine == PLATFORM_POWERMAC) return -ENODEV; /* fix up new node's linux_phandle field */ @@ -1999,9 +1989,11 @@ int prom_add_property(struct device_node* np, struct property* prop) *next = prop; write_unlock(&devtree_lock); +#ifdef CONFIG_PROC_DEVICETREE /* try to add to proc as well if it was initialized */ if (np->pde) proc_device_tree_add_prop(np->pde, prop); +#endif /* CONFIG_PROC_DEVICETREE */ return 0; } diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 09db1bb9ec91..4ce0105c308e 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -117,11 +117,6 @@ int of_workarounds; #define prom_debug(x...) #endif -#ifdef CONFIG_PPC32 -#define PLATFORM_POWERMAC _MACH_Pmac -#define PLATFORM_CHRP _MACH_chrp -#endif - typedef u32 prom_arg_t; @@ -2078,7 +2073,8 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, /* * On pSeries, inform the firmware about our capabilities */ - if (RELOC(of_platform) & PLATFORM_PSERIES) + if (RELOC(of_platform) == PLATFORM_PSERIES || + RELOC(of_platform) == PLATFORM_PSERIES_LPAR) prom_send_capabilities(); #endif diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index 5bdd5b079d96..ae1a36449ccd 100644 --- a/arch/powerpc/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c @@ -259,7 +259,7 @@ static int __init proc_rtas_init(void) { struct proc_dir_entry *entry; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (_machine != PLATFORM_PSERIES && _machine != PLATFORM_PSERIES_LPAR) return 1; rtas_node = of_find_node_by_name(NULL, "rtas"); diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 9d4e07f6f1ec..4283fa33f784 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -29,9 +29,6 @@ #include #include #include -#ifdef CONFIG_PPC64 -#include -#endif struct rtas_t rtas = { .lock = SPIN_LOCK_UNLOCKED @@ -671,7 +668,7 @@ void __init rtas_initialize(void) * the stop-self token if any */ #ifdef CONFIG_PPC64 - if (systemcfg->platform == PLATFORM_PSERIES_LPAR) + if (_machine == PLATFORM_PSERIES_LPAR) rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX); #endif rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region); diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 17c46a2e356d..06e4ef215627 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -63,6 +64,11 @@ #define DBG(fmt...) #endif +#ifdef CONFIG_PPC_MULTIPLATFORM +int _machine = 0; +EXPORT_SYMBOL(_machine); +#endif + /* * This still seems to be needed... -- paulus */ @@ -513,8 +519,8 @@ void __init smp_setup_cpu_maps(void) * On pSeries LPAR, we need to know how many cpus * could possibly be added to this partition. */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR && - (dn = of_find_node_by_path("/rtas"))) { + if (_machine == PLATFORM_PSERIES_LPAR && + (dn = of_find_node_by_path("/rtas"))) { int num_addr_cell, num_size_cell, maxcpus; unsigned int *ireg; @@ -558,7 +564,7 @@ void __init smp_setup_cpu_maps(void) cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); } - systemcfg->processorCount = num_present_cpus(); + _systemcfg->processorCount = num_present_cpus(); #endif /* CONFIG_PPC64 */ } #endif /* CONFIG_SMP */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 55f485f78c00..f73d7681b2e9 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -72,8 +72,6 @@ unsigned int DMA_MODE_WRITE; int have_of = 1; #ifdef CONFIG_PPC_MULTIPLATFORM -int _machine = 0; - extern void prep_init(void); extern void pmac_init(void); extern void chrp_init(void); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index fe39aac4f24d..be607b877a55 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -100,10 +100,9 @@ extern void udbg_init_maple_realmode(void); extern unsigned long klimit; extern void mm_init_ppc64(void); -extern void stab_initialize(unsigned long stab); -extern void htab_initialize(void); extern void early_init_devtree(void *flat_dt); extern void unflatten_device_tree(void); +extern void check_for_initrd(void); int have_of = 1; int boot_cpuid = 0; @@ -256,11 +255,10 @@ void __init early_setup(unsigned long dt_ptr) * Iterate all ppc_md structures until we find the proper * one for the current machine type */ - DBG("Probing machine type for platform %x...\n", - systemcfg->platform); + DBG("Probing machine type for platform %x...\n", _machine); for (mach = machines; *mach; mach++) { - if ((*mach)->probe(systemcfg->platform)) + if ((*mach)->probe(_machine)) break; } /* What can we do if we didn't find ? */ @@ -292,6 +290,28 @@ void __init early_setup(unsigned long dt_ptr) DBG(" <- early_setup()\n"); } +#ifdef CONFIG_SMP +void early_setup_secondary(void) +{ + struct paca_struct *lpaca = get_paca(); + + /* Mark enabled in PACA */ + lpaca->proc_enabled = 0; + + /* Initialize hash table for that CPU */ + htab_initialize_secondary(); + + /* Initialize STAB/SLB. We use a virtual address as it works + * in real mode on pSeries and we want a virutal address on + * iSeries anyway + */ + if (cpu_has_feature(CPU_FTR_SLB)) + slb_initialize(); + else + stab_initialize(lpaca->stab_addr); +} + +#endif /* CONFIG_SMP */ #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) void smp_release_cpus(void) @@ -317,7 +337,8 @@ void smp_release_cpus(void) #endif /* CONFIG_SMP || CONFIG_KEXEC */ /* - * Initialize some remaining members of the ppc64_caches and systemcfg structures + * Initialize some remaining members of the ppc64_caches and systemcfg + * structures * (at least until we get rid of them completely). This is mostly some * cache informations about the CPU that will be used by cache flush * routines and/or provided to userland @@ -342,7 +363,7 @@ static void __init initialize_cache_info(void) const char *dc, *ic; /* Then read cache informations */ - if (systemcfg->platform == PLATFORM_POWERMAC) { + if (_machine == PLATFORM_POWERMAC) { dc = "d-cache-block-size"; ic = "i-cache-block-size"; } else { @@ -362,8 +383,8 @@ static void __init initialize_cache_info(void) DBG("Argh, can't find dcache properties ! " "sizep: %p, lsizep: %p\n", sizep, lsizep); - systemcfg->dcache_size = ppc64_caches.dsize = size; - systemcfg->dcache_line_size = + _systemcfg->dcache_size = ppc64_caches.dsize = size; + _systemcfg->dcache_line_size = ppc64_caches.dline_size = lsize; ppc64_caches.log_dline_size = __ilog2(lsize); ppc64_caches.dlines_per_page = PAGE_SIZE / lsize; @@ -380,8 +401,8 @@ static void __init initialize_cache_info(void) DBG("Argh, can't find icache properties ! " "sizep: %p, lsizep: %p\n", sizep, lsizep); - systemcfg->icache_size = ppc64_caches.isize = size; - systemcfg->icache_line_size = + _systemcfg->icache_size = ppc64_caches.isize = size; + _systemcfg->icache_line_size = ppc64_caches.iline_size = lsize; ppc64_caches.log_iline_size = __ilog2(lsize); ppc64_caches.ilines_per_page = PAGE_SIZE / lsize; @@ -389,10 +410,12 @@ static void __init initialize_cache_info(void) } /* Add an eye catcher and the systemcfg layout version number */ - strcpy(systemcfg->eye_catcher, "SYSTEMCFG:PPC64"); - systemcfg->version.major = SYSTEMCFG_MAJOR; - systemcfg->version.minor = SYSTEMCFG_MINOR; - systemcfg->processor = mfspr(SPRN_PVR); + strcpy(_systemcfg->eye_catcher, "SYSTEMCFG:PPC64"); + _systemcfg->version.major = SYSTEMCFG_MAJOR; + _systemcfg->version.minor = SYSTEMCFG_MINOR; + _systemcfg->processor = mfspr(SPRN_PVR); + _systemcfg->platform = _machine; + _systemcfg->physicalMemorySize = lmb_phys_mem_size(); DBG(" <- initialize_cache_info()\n"); } @@ -481,10 +504,10 @@ void __init setup_system(void) printk("-----------------------------------------------------\n"); printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size); printk("ppc64_interrupt_controller = 0x%ld\n", ppc64_interrupt_controller); - printk("systemcfg = 0x%p\n", systemcfg); - printk("systemcfg->platform = 0x%x\n", systemcfg->platform); - printk("systemcfg->processorCount = 0x%lx\n", systemcfg->processorCount); - printk("systemcfg->physicalMemorySize = 0x%lx\n", systemcfg->physicalMemorySize); + printk("systemcfg = 0x%p\n", _systemcfg); + printk("systemcfg->platform = 0x%x\n", _systemcfg->platform); + printk("systemcfg->processorCount = 0x%lx\n", _systemcfg->processorCount); + printk("systemcfg->physicalMemorySize = 0x%lx\n", _systemcfg->physicalMemorySize); printk("ppc64_caches.dcache_line_size = 0x%x\n", ppc64_caches.dline_size); printk("ppc64_caches.icache_line_size = 0x%x\n", @@ -566,12 +589,12 @@ void __init setup_syscall_map(void) for (i = 0; i < __NR_syscalls; i++) { if (sys_call_table[i*2] != sys_ni_syscall) { count64++; - systemcfg->syscall_map_64[i >> 5] |= + _systemcfg->syscall_map_64[i >> 5] |= 0x80000000UL >> (i & 0x1f); } if (sys_call_table[i*2+1] != sys_ni_syscall) { count32++; - systemcfg->syscall_map_32[i >> 5] |= + _systemcfg->syscall_map_32[i >> 5] |= 0x80000000UL >> (i & 0x1f); } } diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 5c330c3366e4..7fd530898bd1 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -44,6 +44,7 @@ #include #include #include +#include #ifdef CONFIG_PPC64 #include #endif @@ -368,7 +369,9 @@ int generic_cpu_disable(void) if (cpu == boot_cpuid) return -EBUSY; - systemcfg->processorCount--; +#ifdef CONFIG_PPC64 + _systemcfg->processorCount--; +#endif cpu_clear(cpu, cpu_online_map); fixup_irqs(cpu_online_map); return 0; diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index a8210ed5c686..9c921d1c4084 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -52,7 +52,6 @@ #include #include #include -#include #include /* readdir & getdents */ diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index a6282b625b44..386006b3d616 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -271,13 +271,13 @@ static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, * tb_to_xs and stamp_xsec values are consistent. If not, then it * loops back and reads them again until this criteria is met. */ - ++(systemcfg->tb_update_count); + ++(_systemcfg->tb_update_count); smp_wmb(); - systemcfg->tb_orig_stamp = new_tb_stamp; - systemcfg->stamp_xsec = new_stamp_xsec; - systemcfg->tb_to_xs = new_tb_to_xs; + _systemcfg->tb_orig_stamp = new_tb_stamp; + _systemcfg->stamp_xsec = new_stamp_xsec; + _systemcfg->tb_to_xs = new_tb_to_xs; smp_wmb(); - ++(systemcfg->tb_update_count); + ++(_systemcfg->tb_update_count); #endif } @@ -357,8 +357,9 @@ static void iSeries_tb_recal(void) do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; tb_to_xs = divres.result_low; do_gtod.varp->tb_to_xs = tb_to_xs; - systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; - systemcfg->tb_to_xs = tb_to_xs; + _systemcfg->tb_ticks_per_sec = + tb_ticks_per_sec; + _systemcfg->tb_to_xs = tb_to_xs; } else { printk( "Titan recalibrate: FAILED (difference > 4 percent)\n" @@ -559,8 +560,8 @@ int do_settimeofday(struct timespec *tv) update_gtod(tb_last_jiffy, new_xsec, do_gtod.varp->tb_to_xs); #ifdef CONFIG_PPC64 - systemcfg->tz_minuteswest = sys_tz.tz_minuteswest; - systemcfg->tz_dsttime = sys_tz.tz_dsttime; + _systemcfg->tz_minuteswest = sys_tz.tz_minuteswest; + _systemcfg->tz_dsttime = sys_tz.tz_dsttime; #endif write_sequnlock_irqrestore(&xtime_lock, flags); @@ -711,11 +712,11 @@ void __init time_init(void) do_gtod.varp->tb_to_xs = tb_to_xs; do_gtod.tb_to_us = tb_to_us; #ifdef CONFIG_PPC64 - systemcfg->tb_orig_stamp = tb_last_jiffy; - systemcfg->tb_update_count = 0; - systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; - systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; - systemcfg->tb_to_xs = tb_to_xs; + _systemcfg->tb_orig_stamp = tb_last_jiffy; + _systemcfg->tb_update_count = 0; + _systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; + _systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; + _systemcfg->tb_to_xs = tb_to_xs; #endif time_freq = 0; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 0578f8387603..2020bb7648fb 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -129,7 +129,7 @@ int die(const char *str, struct pt_regs *regs, long err) nl = 1; #endif #ifdef CONFIG_PPC64 - switch (systemcfg->platform) { + switch (_machine) { case PLATFORM_PSERIES: printk("PSERIES "); nl = 1; diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index c8c9c2df97e9..706e8a63ced9 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -84,10 +84,11 @@ extern unsigned long dart_tablebase; #endif /* CONFIG_U3_DART */ +static unsigned long _SDR1; +struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; + hpte_t *htab_address; unsigned long htab_hash_mask; -unsigned long _SDR1; -struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; int mmu_linear_psize = MMU_PAGE_4K; int mmu_virtual_psize = MMU_PAGE_4K; #ifdef CONFIG_HUGETLB_PAGE @@ -165,7 +166,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, * normal insert callback here. */ #ifdef CONFIG_PPC_ISERIES - if (systemcfg->platform == PLATFORM_ISERIES_LPAR) + if (_machine == PLATFORM_ISERIES_LPAR) ret = iSeries_hpte_insert(hpteg, va, virt_to_abs(paddr), tmp_mode, @@ -174,7 +175,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, else #endif #ifdef CONFIG_PPC_PSERIES - if (systemcfg->platform & PLATFORM_LPAR) + if (_machine & PLATFORM_LPAR) ret = pSeries_lpar_hpte_insert(hpteg, va, virt_to_abs(paddr), tmp_mode, @@ -293,7 +294,7 @@ static void __init htab_init_page_sizes(void) * Not in the device-tree, let's fallback on known size * list for 16M capable GP & GR */ - if ((systemcfg->platform != PLATFORM_ISERIES_LPAR) && + if ((_machine != PLATFORM_ISERIES_LPAR) && cpu_has_feature(CPU_FTR_16M_PAGE)) memcpy(mmu_psize_defs, mmu_psize_defaults_gp, sizeof(mmu_psize_defaults_gp)); @@ -364,7 +365,7 @@ static int __init htab_dt_scan_pftsize(unsigned long node, static unsigned long __init htab_get_table_size(void) { - unsigned long rnd_mem_size, pteg_count; + unsigned long mem_size, rnd_mem_size, pteg_count; /* If hash size isn't already provided by the platform, we try to * retreive it from the device-tree. If it's not there neither, we @@ -376,8 +377,9 @@ static unsigned long __init htab_get_table_size(void) return 1UL << ppc64_pft_size; /* round mem_size up to next power of 2 */ - rnd_mem_size = 1UL << __ilog2(systemcfg->physicalMemorySize); - if (rnd_mem_size < systemcfg->physicalMemorySize) + mem_size = lmb_phys_mem_size(); + rnd_mem_size = 1UL << __ilog2(mem_size); + if (rnd_mem_size < mem_size) rnd_mem_size <<= 1; /* # pages / 2 */ @@ -419,7 +421,7 @@ void __init htab_initialize(void) htab_hash_mask = pteg_count - 1; - if (systemcfg->platform & PLATFORM_LPAR) { + if (platform_is_lpar()) { /* Using a hypervisor which owns the htab */ htab_address = NULL; _SDR1 = 0; @@ -440,6 +442,9 @@ void __init htab_initialize(void) /* Initialize the HPT with no entries */ memset((void *)table, 0, htab_size_bytes); + + /* Set SDR1 */ + mtspr(SPRN_SDR1, _SDR1); } mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX; @@ -509,6 +514,12 @@ void __init htab_initialize(void) #undef KB #undef MB +void __init htab_initialize_secondary(void) +{ + if (!platform_is_lpar()) + mtspr(SPRN_SDR1, _SDR1); +} + /* * Called by asm hashtable.S for doing lazy icache flush */ diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index fa325dbf98fc..cfbb4e1f966b 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -20,6 +20,7 @@ #include #include #include +#include struct stab_entry { unsigned long esid_data; @@ -256,7 +257,7 @@ void stabs_alloc(void) paca[cpu].stab_addr = newstab; paca[cpu].stab_real = virt_to_abs(newstab); - printk(KERN_DEBUG "Segment table for CPU %d at 0x%lx " + printk(KERN_INFO "Segment table for CPU %d at 0x%lx " "virtual, 0x%lx absolute\n", cpu, paca[cpu].stab_addr, paca[cpu].stab_real); } @@ -270,10 +271,28 @@ void stabs_alloc(void) void stab_initialize(unsigned long stab) { unsigned long vsid = get_kernel_vsid(KERNELBASE); + unsigned long stabreal; asm volatile("isync; slbia; isync":::"memory"); make_ste(stab, GET_ESID(KERNELBASE), vsid); /* Order update */ asm volatile("sync":::"memory"); + + /* Set ASR */ + stabreal = get_paca()->stab_real | 0x1ul; + +#ifdef CONFIG_PPC_ISERIES + if (firmware_has_feature(FW_FEATURE_ISERIES)) { + HvCall1(HvCallBaseSetASR, stabreal); + return; + } +#endif /* CONFIG_PPC_ISERIES */ +#ifdef CONFIG_PPC_PSERIES + if (platform_is_lpar()) { + plpar_hcall_norets(H_SET_ASR, stabreal); + return; + } +#endif + mtspr(SPRN_ASR, stabreal); } diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index c4ee5478427b..e3a024e324b6 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -233,8 +233,7 @@ static unsigned long get_pc(struct pt_regs *regs) mmcra = mfspr(SPRN_MMCRA); /* Were we in the hypervisor? */ - if ((systemcfg->platform == PLATFORM_PSERIES_LPAR) && - (mmcra & MMCRA_SIHV)) + if (platform_is_lpar() && (mmcra & MMCRA_SIHV)) /* function descriptor madness */ return *((unsigned long *)hypervisor_bucket); diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 7f8f0cda6a74..623c39aa0436 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include @@ -71,7 +72,7 @@ extern void hvlog(char *fmt, ...); #endif /* Function Prototypes */ -static void build_iSeries_Memory_Map(void); +static unsigned long build_iSeries_Memory_Map(void); static void iseries_shared_idle(void); static void iseries_dedicated_idle(void); #ifdef CONFIG_PCI @@ -403,9 +404,11 @@ void mschunks_alloc(unsigned long num_chunks) * a table used to translate Linux's physical addresses to these * absolute addresses. Absolute addresses are needed when * communicating with the hypervisor (e.g. to build HPT entries) + * + * Returns the physical memory size */ -static void __init build_iSeries_Memory_Map(void) +static unsigned long __init build_iSeries_Memory_Map(void) { u32 loadAreaFirstChunk, loadAreaLastChunk, loadAreaSize; u32 nextPhysChunk; @@ -538,7 +541,7 @@ static void __init build_iSeries_Memory_Map(void) * which should be equal to * nextPhysChunk */ - systemcfg->physicalMemorySize = chunk_to_addr(nextPhysChunk); + return chunk_to_addr(nextPhysChunk); } /* @@ -564,8 +567,8 @@ static void __init iSeries_setup_arch(void) printk("Max physical processors = %d\n", itVpdAreas.xSlicMaxPhysicalProcs); - systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR; - printk("Processor version = %x\n", systemcfg->processor); + _systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR; + printk("Processor version = %x\n", _systemcfg->processor); } static void iSeries_show_cpuinfo(struct seq_file *m) @@ -929,7 +932,7 @@ void dt_cpus(struct iseries_flat_dt *dt) dt_end_node(dt); } -void build_flat_dt(struct iseries_flat_dt *dt) +void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size) { u64 tmp[2]; @@ -945,7 +948,7 @@ void build_flat_dt(struct iseries_flat_dt *dt) dt_prop_str(dt, "name", "memory"); dt_prop_str(dt, "device_type", "memory"); tmp[0] = 0; - tmp[1] = systemcfg->physicalMemorySize; + tmp[1] = phys_mem_size; dt_prop_u64_list(dt, "reg", tmp, 2); dt_end_node(dt); @@ -965,13 +968,15 @@ void build_flat_dt(struct iseries_flat_dt *dt) void * __init iSeries_early_setup(void) { + unsigned long phys_mem_size; + iSeries_fixup_klimit(); /* * Initialize the table which translate Linux physical addresses to * AS/400 absolute addresses */ - build_iSeries_Memory_Map(); + phys_mem_size = build_iSeries_Memory_Map(); iSeries_get_cmdline(); @@ -981,7 +986,7 @@ void * __init iSeries_early_setup(void) /* Parse early parameters, in particular mem=x */ parse_early_param(); - build_flat_dt(&iseries_dt); + build_flat_dt(&iseries_dt, phys_mem_size); return (void *) __pa(&iseries_dt); } diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index b760836bb9d1..a33ba833109c 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -32,7 +32,6 @@ #include #include #include -#include #undef DEBUG @@ -1186,7 +1185,7 @@ static int __init eeh_init_proc(void) { struct proc_dir_entry *e; - if (systemcfg->platform & PLATFORM_PSERIES) { + if (platform_is_pseries()) { e = create_proc_entry("ppc64/eeh", 0, NULL); if (e) e->proc_fops = &proc_eeh_operations; diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index fcc50bfd43fd..97ba5214417f 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -42,7 +42,6 @@ #include #include #include -#include #include #include #include @@ -582,7 +581,7 @@ void iommu_init_early_pSeries(void) return; } - if (systemcfg->platform & PLATFORM_LPAR) { + if (platform_is_lpar()) { if (firmware_has_feature(FW_FEATURE_MULTITCE)) { ppc_md.tce_build = tce_buildmulti_pSeriesLP; ppc_md.tce_free = tce_freemulti_pSeriesLP; diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index c198656a3bb5..6b0772f35692 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -123,7 +123,7 @@ static void fixup_winbond_82c105(struct pci_dev* dev) int i; unsigned int reg; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (!platform_is_pseries()) return; printk("Using INTC for W82c105 IDE controller.\n"); diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index d7d400339458..d8864164dbe8 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -408,7 +408,7 @@ static int proc_ppc64_create_ofdt(void) { struct proc_dir_entry *ent; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (!platform_is_pseries()) return 0; ent = create_proc_entry("ppc64/ofdt", S_IWUSR, NULL); diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index e26b0420b6dd..00cf331a1dc4 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -482,10 +482,12 @@ static int __init rtas_init(void) { struct proc_dir_entry *entry; - /* No RTAS, only warn if we are on a pSeries box */ + if (!platform_is_pseries()) + return 0; + + /* No RTAS */ if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) { - if (systemcfg->platform & PLATFORM_PSERIES) - printk(KERN_INFO "rtasd: no event-scan on system\n"); + printk(KERN_INFO "rtasd: no event-scan on system\n"); return 1; } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index a093a0d4dd69..e94247c28d42 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -249,7 +249,7 @@ static void __init pSeries_setup_arch(void) ppc_md.idle_loop = default_idle; } - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) ppc_md.enable_pmcs = pseries_lpar_enable_pmcs; else ppc_md.enable_pmcs = power4_enable_pmcs; @@ -378,7 +378,7 @@ static void __init pSeries_init_early(void) fw_feature_init(); - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) hpte_init_lpar(); else { hpte_init_native(); @@ -388,7 +388,7 @@ static void __init pSeries_init_early(void) generic_find_legacy_serial_ports(&physport, &default_speed); - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) find_udbg_vterm(); else if (physport) { /* Map the uart for udbg. */ @@ -592,7 +592,7 @@ static void pseries_shared_idle(void) static int pSeries_pci_probe_mode(struct pci_bus *bus) { - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) return PCI_PROBE_DEVTREE; return PCI_PROBE_NORMAL; } diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 7a243e8ccd7e..3ba794ca3288 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -46,6 +46,7 @@ #include #include #include +#include #include "plpar_wrappers.h" @@ -96,7 +97,7 @@ int pSeries_cpu_disable(void) int cpu = smp_processor_id(); cpu_clear(cpu, cpu_online_map); - systemcfg->processorCount--; + _systemcfg->processorCount--; /*fix boot_cpuid here*/ if (cpu == boot_cpuid) @@ -441,7 +442,7 @@ void __init smp_init_pSeries(void) smp_ops->cpu_die = pSeries_cpu_die; /* Processors can be added/removed only on LPAR */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR) + if (platform_is_lpar()) pSeries_reconfig_notifier_register(&pSeries_smp_nb); #endif diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 405c4f3229b3..72ac18067ece 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -545,7 +545,9 @@ nextnode: of_node_put(np); } - if (systemcfg->platform == PLATFORM_PSERIES) { + if (platform_is_lpar()) + ops = &pSeriesLP_ops; + else { #ifdef CONFIG_SMP for_each_cpu(i) { int hard_id; @@ -561,8 +563,6 @@ nextnode: #else xics_per_cpu[0] = ioremap(intr_base, intr_size); #endif /* CONFIG_SMP */ - } else if (systemcfg->platform == PLATFORM_PSERIES_LPAR) { - ops = &pSeriesLP_ops; } xics_8259_pic.enable = i8259_pic.enable; diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 307077f14936..66073f775193 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -217,9 +217,6 @@ EXPORT_SYMBOL(adb_try_handler_change); EXPORT_SYMBOL(cuda_request); EXPORT_SYMBOL(cuda_poll); #endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_PPC_MULTIPLATFORM -EXPORT_SYMBOL(_machine); -#endif #ifdef CONFIG_PPC_PMAC EXPORT_SYMBOL(sys_ctrler); EXPORT_SYMBOL(pmac_newworld); diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 6bcb85d2b7fd..dc55e1abc45b 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -76,6 +76,7 @@ unsigned int DMA_MODE_WRITE; #ifdef CONFIG_PPC_MULTIPLATFORM int _machine = 0; +EXPORT_SYMBOL(_machine); extern void prep_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); diff --git a/arch/ppc64/kernel/asm-offsets.c b/arch/ppc64/kernel/asm-offsets.c index bce9065da6cb..84ab5c18ef52 100644 --- a/arch/ppc64/kernel/asm-offsets.c +++ b/arch/ppc64/kernel/asm-offsets.c @@ -74,7 +74,6 @@ int main(void) DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size)); DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size)); DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page)); - DEFINE(PLATFORM, offsetof(struct systemcfg, platform)); DEFINE(PLATFORM_LPAR, PLATFORM_LPAR); /* paca */ diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index 9e8050ea1225..1c869ea72d28 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include @@ -1701,21 +1700,9 @@ _GLOBAL(__secondary_start) HMT_MEDIUM /* Set thread priority to MEDIUM */ ld r2,PACATOC(r13) - li r6,0 - stb r6,PACAPROCENABLED(r13) - -#ifndef CONFIG_PPC_ISERIES - /* Initialize the page table pointer register. */ - LOADADDR(r6,_SDR1) - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -#endif - /* Initialize the first segment table (or SLB) entry */ - ld r3,PACASTABVIRT(r13) /* get addr of segment table */ -BEGIN_FTR_SECTION - bl .stab_initialize -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - bl .slb_initialize + + /* Do early setup for that CPU */ + bl .early_setup_secondary /* Initialize the kernel stack. Just a repeat for iSeries. */ LOADADDR(r3,current_set) @@ -1724,37 +1711,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD std r1,PACAKSAVE(r13) - ld r3,PACASTABREAL(r13) /* get raddr of segment table */ - ori r4,r3,1 /* turn on valid bit */ - -#ifdef CONFIG_PPC_ISERIES - li r0,-1 /* hypervisor call */ - li r3,1 - sldi r3,r3,63 /* 0x8000000000000000 */ - ori r3,r3,4 /* 0x8000000000000004 */ - sc /* HvCall_setASR */ -#else - /* set the ASR */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: -#endif li r7,0 mtlr r7 @@ -1896,40 +1852,6 @@ _STATIC(start_here_multiplatform) mr r3,r31 bl .early_setup - /* set the ASR */ - ld r3,PACASTABREAL(r13) - ori r4,r3,1 /* turn on valid bit */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: - /* Set SDR1 (hash table pointer) */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - /* Test if bit 0 is set (LPAR bit) */ - andi. r3,r3,PLATFORM_LPAR - bne 98f /* branch if result is !0 */ - LOADADDR(r6,_SDR1) /* Only if NOT LPAR */ - sub r6,r6,r26 - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -98: LOADADDR(r3,.start_here_common) SET_REG_TO_CONST(r4, MSR_KERNEL) mtspr SPRN_SRR0,r3 diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c index 715bc0e71e0f..b879d3057ef8 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/ppc64/kernel/idle.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/ppc64/kernel/lparcfg.c index 3e7b2f28ec83..a80ed307515c 100644 --- a/arch/ppc64/kernel/lparcfg.c +++ b/arch/ppc64/kernel/lparcfg.c @@ -35,6 +35,7 @@ #include #include #include +#include #define MODULE_VERS "1.6" #define MODULE_NAME "lparcfg" @@ -371,7 +372,7 @@ static int lparcfg_data(struct seq_file *m, void *v) lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", NULL); if (lrdrp == NULL) { - partition_potential_processors = systemcfg->processorCount; + partition_potential_processors = _systemcfg->processorCount; } else { partition_potential_processors = *(lrdrp + 4); } diff --git a/arch/ppc64/kernel/nvram.c b/arch/ppc64/kernel/nvram.c index 4fb1a9f5060d..c0fcd29918ce 100644 --- a/arch/ppc64/kernel/nvram.c +++ b/arch/ppc64/kernel/nvram.c @@ -31,7 +31,6 @@ #include #include #include -#include #undef DEBUG_NVRAM @@ -167,7 +166,7 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file, case IOC_NVRAM_GET_OFFSET: { int part, offset; - if (systemcfg->platform != PLATFORM_POWERMAC) + if (_machine != PLATFORM_POWERMAC) return -EINVAL; if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0) return -EFAULT; @@ -450,7 +449,7 @@ static int nvram_setup_partition(void) * in our nvram, as Apple defined partitions use pretty much * all of the space */ - if (systemcfg->platform == PLATFORM_POWERMAC) + if (_machine == PLATFORM_POWERMAC) return -ENOSPC; /* see if we have an OS partition that meets our needs. diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c index 30247ff74972..66698fdf059e 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/ppc64/kernel/pci.c @@ -1277,12 +1277,9 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus, * G5 machines... So when something asks for bus 0 io base * (bus 0 is HT root), we return the AGP one instead. */ -#ifdef CONFIG_PPC_PMAC - if (systemcfg->platform == PLATFORM_POWERMAC && - machine_is_compatible("MacRISC4")) + if (machine_is_compatible("MacRISC4")) if (in_bus == 0) in_bus = 0xf0; -#endif /* CONFIG_PPC_PMAC */ /* That syscall isn't quite compatible with PCI domains, but it's * used on pre-domains setup. We return the first match diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/ppc64/kernel/proc_ppc64.c index 24e955ee9487..c893a11ee198 100644 --- a/arch/ppc64/kernel/proc_ppc64.c +++ b/arch/ppc64/kernel/proc_ppc64.c @@ -53,7 +53,7 @@ static int __init proc_ppc64_create(void) if (!root) return 1; - if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_CELL))) + if (!(platform_is_pseries() || _machine == PLATFORM_CELL)) return 0; if (!proc_mkdir("rtas", root)) @@ -74,7 +74,7 @@ static int __init proc_ppc64_init(void) if (!pde) return 1; pde->nlink = 1; - pde->data = systemcfg; + pde->data = _systemcfg; pde->size = PAGE_SIZE; pde->proc_fops = &page_map_fops; diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c index 3402fbee62c7..fbad2c360784 100644 --- a/arch/ppc64/kernel/prom.c +++ b/arch/ppc64/kernel/prom.c @@ -318,7 +318,7 @@ static int __devinit finish_node_interrupts(struct device_node *np, } /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */ - if (systemcfg->platform == PLATFORM_POWERMAC && ic && ic->parent) { + if (_machine == PLATFORM_POWERMAC && ic && ic->parent) { char *name = get_property(ic->parent, "name", NULL); if (name && !strcmp(name, "u3")) np->intrs[intrcount].line += 128; @@ -1065,7 +1065,7 @@ static int __init early_init_dt_scan_chosen(unsigned long node, prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL); if (prop == NULL) return 0; - systemcfg->platform = *prop; + _machine = *prop; /* check if iommu is forced on or off */ if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL) @@ -1230,11 +1230,8 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_memory, NULL); lmb_enforce_memory_limit(memory_limit); lmb_analyze(); - systemcfg->physicalMemorySize = lmb_phys_mem_size(); lmb_reserve(0, __pa(klimit)); - DBG("Phys. mem: %lx\n", systemcfg->physicalMemorySize); - /* Reserve LMB regions used by kernel, initrd, dt, etc... */ early_reserve_mem(); @@ -1753,7 +1750,7 @@ static int of_finish_dynamic_node(struct device_node *node, /* We don't support that function on PowerMac, at least * not yet */ - if (systemcfg->platform == PLATFORM_POWERMAC) + if (_machine == PLATFORM_POWERMAC) return -ENODEV; /* fix up new node's linux_phandle field */ diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index e4c880dab997..6375f40b23db 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1934,7 +1934,8 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long /* * On pSeries, inform the firmware about our capabilities */ - if (RELOC(of_platform) & PLATFORM_PSERIES) + if (RELOC(of_platform) == PLATFORM_PSERIES || + RELOC(of_platform) == PLATFORM_PSERIES_LPAR) prom_send_capabilities(); /* diff --git a/arch/ppc64/kernel/vdso.c b/arch/ppc64/kernel/vdso.c index 4aacf521e3e4..1bbacac44988 100644 --- a/arch/ppc64/kernel/vdso.c +++ b/arch/ppc64/kernel/vdso.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #undef DEBUG @@ -179,7 +180,7 @@ static struct page * vdso_vma_nopage(struct vm_area_struct * vma, * Last page is systemcfg. */ if ((vma->vm_end - address) <= PAGE_SIZE) - pg = virt_to_page(systemcfg); + pg = virt_to_page(_systemcfg); else pg = virt_to_page(vbase + offset); @@ -604,7 +605,7 @@ void __init vdso_init(void) get_page(pg); } - get_page(virt_to_page(systemcfg)); + get_page(virt_to_page(_systemcfg)); } int in_gate_area_no_task(unsigned long addr) diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h index 806c142ae9ea..12fabbcb04f0 100644 --- a/include/asm-powerpc/firmware.h +++ b/include/asm-powerpc/firmware.h @@ -43,6 +43,7 @@ #define FW_FEATURE_ISERIES (1UL<<21) enum { +#ifdef CONFIG_PPC64 FW_FEATURE_PSERIES_POSSIBLE = FW_FEATURE_PFT | FW_FEATURE_TCE | FW_FEATURE_SPRG0 | FW_FEATURE_DABR | FW_FEATURE_COPY | FW_FEATURE_ASR | FW_FEATURE_DEBUG | FW_FEATURE_TERM | @@ -70,6 +71,11 @@ enum { FW_FEATURE_ISERIES_ALWAYS & #endif FW_FEATURE_POSSIBLE, + +#else /* CONFIG_PPC64 */ + FW_FEATURE_POSSIBLE = 0, + FW_FEATURE_ALWAYS = 0, +#endif }; /* This is used to identify firmware features which are available diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h index 1dc4bf7b52b3..82e3f4e6550d 100644 --- a/include/asm-powerpc/processor.h +++ b/include/asm-powerpc/processor.h @@ -17,65 +17,74 @@ #include #include #include -#ifdef CONFIG_PPC64 -#include -#endif -#ifdef CONFIG_PPC32 -/* 32-bit platform types */ -/* We only need to define a new _MACH_xxx for machines which are part of - * a configuration which supports more than one type of different machine. - * This is currently limited to CONFIG_PPC_MULTIPLATFORM and CHRP/PReP/PMac. - * -- Tom +/* We do _not_ want to define new machine types at all, those must die + * in favor of using the device-tree + * -- BenH. */ -#define _MACH_prep 0x00000001 -#define _MACH_Pmac 0x00000002 /* pmac or pmac clone (non-chrp) */ -#define _MACH_chrp 0x00000004 /* chrp machine */ -/* see residual.h for these */ +/* Platforms codes (to be obsoleted) */ +#define PLATFORM_PSERIES 0x0100 +#define PLATFORM_PSERIES_LPAR 0x0101 +#define PLATFORM_ISERIES_LPAR 0x0201 +#define PLATFORM_LPAR 0x0001 +#define PLATFORM_POWERMAC 0x0400 +#define PLATFORM_MAPLE 0x0500 +#define PLATFORM_PREP 0x0600 +#define PLATFORM_CHRP 0x0700 +#define PLATFORM_CELL 0x1000 + +/* Compat platform codes for 32 bits */ +#define _MACH_prep PLATFORM_PREP +#define _MACH_Pmac PLATFORM_POWERMAC +#define _MACH_chrp PLATFORM_CHRP + +/* PREP sub-platform types see residual.h for these */ #define _PREP_Motorola 0x01 /* motorola prep */ #define _PREP_Firm 0x02 /* firmworks prep */ #define _PREP_IBM 0x00 /* ibm prep */ #define _PREP_Bull 0x03 /* bull prep */ -/* these are arbitrary */ +/* CHRP sub-platform types. These are arbitrary */ #define _CHRP_Motorola 0x04 /* motorola chrp, the cobra */ #define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */ #define _CHRP_Pegasos 0x06 /* Genesi/bplan's Pegasos and Pegasos2 */ -#ifdef CONFIG_PPC_MULTIPLATFORM +#define platform_is_pseries() (_machine == PLATFORM_PSERIES || \ + _machine == PLATFORM_PSERIES_LPAR) +#define platform_is_lpar() (!!(_machine & PLATFORM_LPAR)) + +#if defined(CONFIG_PPC_MULTIPLATFORM) extern int _machine; +#ifdef CONFIG_PPC32 + /* what kind of prep workstation we are */ extern int _prep_type; extern int _chrp_type; /* * This is used to identify the board type from a given PReP board - * vendor. Board revision is also made available. + * vendor. Board revision is also made available. This will be moved + * elsewhere soon */ extern unsigned char ucSystemType; extern unsigned char ucBoardRev; extern unsigned char ucBoardRevMaj, ucBoardRevMin; + +#endif /* CONFIG_PPC32 */ + +#elif defined(CONFIG_PPC_ISERIES) +/* + * iSeries is soon to become MULTIPLATFORM hopefully ... + */ +#define _machine CONFIG_PPC_ISERIES_LPAR #else #define _machine 0 #endif /* CONFIG_PPC_MULTIPLATFORM */ -#endif /* CONFIG_PPC32 */ -#ifdef CONFIG_PPC64 -/* Platforms supported by PPC64 */ -#define PLATFORM_PSERIES 0x0100 -#define PLATFORM_PSERIES_LPAR 0x0101 -#define PLATFORM_ISERIES_LPAR 0x0201 -#define PLATFORM_LPAR 0x0001 -#define PLATFORM_POWERMAC 0x0400 -#define PLATFORM_MAPLE 0x0500 -#define PLATFORM_CELL 0x1000 - -/* Compatibility with drivers coming from PPC32 world */ -#define _machine (systemcfg->platform) -#define _MACH_Pmac PLATFORM_POWERMAC -#endif + + /* * Default implementation of macro that returns current diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index ef121f4f0bab..eb392d038ed7 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -363,6 +363,7 @@ #define SPRN_RPA 0x3D6 /* Required Physical Address Register */ #define SPRN_SDA 0x3BF /* Sampled Data Address Register */ #define SPRN_SDR1 0x019 /* MMU Hash Base Register */ +#define SPRN_ASR 0x118 /* Address Space Register */ #define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */ #define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */ #define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */ diff --git a/include/asm-powerpc/systemcfg.h b/include/asm-powerpc/systemcfg.h new file mode 100644 index 000000000000..36b5cbe466f1 --- /dev/null +++ b/include/asm-powerpc/systemcfg.h @@ -0,0 +1,64 @@ +#ifndef _SYSTEMCFG_H +#define _SYSTEMCFG_H + +/* + * Copyright (C) 2002 Peter Bergner , IBM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* Change Activity: + * 2002/09/30 : bergner : Created + * End Change Activity + */ + +/* + * If the major version changes we are incompatible. + * Minor version changes are a hint. + */ +#define SYSTEMCFG_MAJOR 1 +#define SYSTEMCFG_MINOR 1 + +#ifndef __ASSEMBLY__ + +#include + +#define SYSCALL_MAP_SIZE ((__NR_syscalls + 31) / 32) + +struct systemcfg { + __u8 eye_catcher[16]; /* Eyecatcher: SYSTEMCFG:PPC64 0x00 */ + struct { /* Systemcfg version numbers */ + __u32 major; /* Major number 0x10 */ + __u32 minor; /* Minor number 0x14 */ + } version; + + __u32 platform; /* Platform flags 0x18 */ + __u32 processor; /* Processor type 0x1C */ + __u64 processorCount; /* # of physical processors 0x20 */ + __u64 physicalMemorySize; /* Size of real memory(B) 0x28 */ + __u64 tb_orig_stamp; /* Timebase at boot 0x30 */ + __u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */ + __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */ + __u64 stamp_xsec; /* 0x48 */ + __u64 tb_update_count; /* Timebase atomicity ctr 0x50 */ + __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */ + __u32 tz_dsttime; /* Type of dst correction 0x5C */ + /* next four are no longer used except to be exported to /proc */ + __u32 dcache_size; /* L1 d-cache size 0x60 */ + __u32 dcache_line_size; /* L1 d-cache line size 0x64 */ + __u32 icache_size; /* L1 i-cache size 0x68 */ + __u32 icache_line_size; /* L1 i-cache line size 0x6C */ + __u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of available syscalls 0x70 */ + __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of available syscalls */ +}; + +#ifdef __KERNEL__ +extern struct systemcfg *_systemcfg; /* to be renamed */ +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* _SYSTEMCFG_H */ diff --git a/include/asm-ppc64/mmu.h b/include/asm-ppc64/mmu.h index d50997bace1c..c43d512d5902 100644 --- a/include/asm-ppc64/mmu.h +++ b/include/asm-ppc64/mmu.h @@ -224,6 +224,8 @@ extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long pstart, unsigned long mode, int psize); +extern void htab_initialize(void); +extern void htab_initialize_secondary(void); extern void hpte_init_native(void); extern void hpte_init_lpar(void); extern void hpte_init_iSeries(void); @@ -245,6 +247,7 @@ extern long iSeries_hpte_insert(unsigned long hpte_group, extern void stabs_alloc(void); extern void slb_initialize(void); +extern void stab_initialize(unsigned long stab); #endif /* __ASSEMBLY__ */ diff --git a/include/asm-ppc64/systemcfg.h b/include/asm-ppc64/systemcfg.h deleted file mode 100644 index 9b86b53129aa..000000000000 --- a/include/asm-ppc64/systemcfg.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef _SYSTEMCFG_H -#define _SYSTEMCFG_H - -/* - * Copyright (C) 2002 Peter Bergner , IBM - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* Change Activity: - * 2002/09/30 : bergner : Created - * End Change Activity - */ - -/* - * If the major version changes we are incompatible. - * Minor version changes are a hint. - */ -#define SYSTEMCFG_MAJOR 1 -#define SYSTEMCFG_MINOR 1 - -#ifndef __ASSEMBLY__ - -#include - -#define SYSCALL_MAP_SIZE ((__NR_syscalls + 31) / 32) - -struct systemcfg { - __u8 eye_catcher[16]; /* Eyecatcher: SYSTEMCFG:PPC64 0x00 */ - struct { /* Systemcfg version numbers */ - __u32 major; /* Major number 0x10 */ - __u32 minor; /* Minor number 0x14 */ - } version; - - __u32 platform; /* Platform flags 0x18 */ - __u32 processor; /* Processor type 0x1C */ - __u64 processorCount; /* # of physical processors 0x20 */ - __u64 physicalMemorySize; /* Size of real memory(B) 0x28 */ - __u64 tb_orig_stamp; /* Timebase at boot 0x30 */ - __u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */ - __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */ - __u64 stamp_xsec; /* 0x48 */ - __u64 tb_update_count; /* Timebase atomicity ctr 0x50 */ - __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */ - __u32 tz_dsttime; /* Type of dst correction 0x5C */ - /* next four are no longer used except to be exported to /proc */ - __u32 dcache_size; /* L1 d-cache size 0x60 */ - __u32 dcache_line_size; /* L1 d-cache line size 0x64 */ - __u32 icache_size; /* L1 i-cache size 0x68 */ - __u32 icache_line_size; /* L1 i-cache line size 0x6C */ - __u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of available syscalls 0x70 */ - __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of available syscalls */ -}; - -#ifdef __KERNEL__ -extern struct systemcfg *systemcfg; -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* _SYSTEMCFG_H */ -- cgit v1.2.3 From 3db9aaaf87b77eb9669157c723f6cb7e234bcef0 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 10 Nov 2005 14:23:18 +1100 Subject: powerpc: Fix typo introduced in merging platform codes Signed-off-by: Paul Mackerras --- include/asm-powerpc/processor.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'include') diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h index 82e3f4e6550d..f6f186b56b0f 100644 --- a/include/asm-powerpc/processor.h +++ b/include/asm-powerpc/processor.h @@ -78,14 +78,11 @@ extern unsigned char ucBoardRevMaj, ucBoardRevMin; /* * iSeries is soon to become MULTIPLATFORM hopefully ... */ -#define _machine CONFIG_PPC_ISERIES_LPAR +#define _machine PLATFORM_ISERIES_LPAR #else #define _machine 0 #endif /* CONFIG_PPC_MULTIPLATFORM */ - - - /* * Default implementation of macro that returns current * instruction pointer ("program counter"). -- cgit v1.2.3 From a7ddc5e85351931b67a48afa22788d77763837d8 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 10 Nov 2005 14:29:18 +1100 Subject: powerpc: Add user CPU features for POWER4, POWER5, POWER5+ and Cell. This is at the request of the glibc folks, who want to use these bits to select libraries optimized for the microarchitecture and new instructions in these processors. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cputable.c | 19 +++++++++++-------- include/asm-powerpc/cputable.h | 4 ++++ 2 files changed, 15 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index cc4e9eb1c13f..1d85cedbbb7b 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -52,6 +52,9 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); #define COMMON_USER (PPC_FEATURE_32 | PPC_FEATURE_HAS_FPU | \ PPC_FEATURE_HAS_MMU) #define COMMON_USER_PPC64 (COMMON_USER | PPC_FEATURE_64) +#define COMMON_USER_POWER4 (COMMON_USER_PPC64 | PPC_FEATURE_POWER4) +#define COMMON_USER_POWER5 (COMMON_USER_PPC64 | PPC_FEATURE_POWER5) +#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS) /* We only set the spe features if the kernel was compiled with @@ -160,7 +163,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00350000, .cpu_name = "POWER4 (gp)", .cpu_features = CPU_FTRS_POWER4, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER4, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, @@ -175,7 +178,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00380000, .cpu_name = "POWER4+ (gq)", .cpu_features = CPU_FTRS_POWER4, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER4, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, @@ -190,7 +193,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00390000, .cpu_name = "PPC970", .cpu_features = CPU_FTRS_PPC970, - .cpu_user_features = COMMON_USER_PPC64 | + .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, @@ -212,7 +215,7 @@ struct cpu_spec cpu_specs[] = { #else .cpu_features = CPU_FTRS_PPC970, #endif - .cpu_user_features = COMMON_USER_PPC64 | + .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, @@ -230,7 +233,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00440000, .cpu_name = "PPC970MP", .cpu_features = CPU_FTRS_PPC970, - .cpu_user_features = COMMON_USER_PPC64 | + .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, @@ -245,7 +248,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x003a0000, .cpu_name = "POWER5 (gr)", .cpu_features = CPU_FTRS_POWER5, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER5, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, @@ -260,7 +263,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x003b0000, .cpu_name = "POWER5 (gs)", .cpu_features = CPU_FTRS_POWER5, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER5_PLUS, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, @@ -276,7 +279,7 @@ struct cpu_spec cpu_specs[] = { .cpu_name = "Cell Broadband Engine", .cpu_features = CPU_FTRS_CELL, .cpu_user_features = COMMON_USER_PPC64 | - PPC_FEATURE_HAS_ALTIVEC_COMP, + PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, .cpu_setup = __setup_cpu_be, diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index f89fd883e892..04e2726002cf 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -16,6 +16,10 @@ #define PPC_FEATURE_HAS_EFP_SINGLE 0x00400000 #define PPC_FEATURE_HAS_EFP_DOUBLE 0x00200000 #define PPC_FEATURE_NO_TB 0x00100000 +#define PPC_FEATURE_POWER4 0x00080000 +#define PPC_FEATURE_POWER5 0x00040000 +#define PPC_FEATURE_POWER5_PLUS 0x00020000 +#define PPC_FEATURE_CELL 0x00010000 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ -- cgit v1.2.3 From 87655ff26817993932b7d049c4df226fb2c0ac5f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 10 Nov 2005 14:53:16 +1100 Subject: [PATCH] powerpc: 64k pages pmd alloc fix This patch makes the kernel use a different kmem cache for PMD pages as they are smaller than PTE pages. Avoids waste of memory. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/mm/init_64.c | 18 ++++++++++++++---- include/asm-ppc64/pgalloc.h | 4 ++-- 2 files changed, 16 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index ce974c83d88a..e274cf10205c 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -20,6 +20,8 @@ * */ +#undef DEBUG + #include #include #include @@ -64,6 +66,12 @@ #include #include +#ifdef DEBUG +#define DBG(fmt...) printk(fmt) +#else +#define DBG(fmt...) +#endif + #if PGTABLE_RANGE > USER_VSID_RANGE #warning Limited user VSID range means pagetable space is wasted #endif @@ -188,14 +196,14 @@ static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags) } #ifdef CONFIG_PPC_64K_PAGES -static const int pgtable_cache_size[2] = { - PTE_TABLE_SIZE, PGD_TABLE_SIZE +static const unsigned int pgtable_cache_size[3] = { + PTE_TABLE_SIZE, PMD_TABLE_SIZE, PGD_TABLE_SIZE }; static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { - "pte_pmd_cache", "pgd_cache", + "pte_pmd_cache", "pmd_cache", "pgd_cache", }; #else -static const int pgtable_cache_size[2] = { +static const unsigned int pgtable_cache_size[2] = { PTE_TABLE_SIZE, PMD_TABLE_SIZE }; static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { @@ -213,6 +221,8 @@ void pgtable_cache_init(void) int size = pgtable_cache_size[i]; const char *name = pgtable_cache_name[i]; + DBG("Allocating page table cache %s (#%d) " + "for size: %08x...\n", name, i, size); pgtable_cache[i] = kmem_cache_create(name, size, size, SLAB_HWCACHE_ALIGN | diff --git a/include/asm-ppc64/pgalloc.h b/include/asm-ppc64/pgalloc.h index 98da0e4262bd..dcf3622d1946 100644 --- a/include/asm-ppc64/pgalloc.h +++ b/include/asm-ppc64/pgalloc.h @@ -10,8 +10,8 @@ extern kmem_cache_t *pgtable_cache[]; #ifdef CONFIG_PPC_64K_PAGES #define PTE_CACHE_NUM 0 -#define PMD_CACHE_NUM 0 -#define PGD_CACHE_NUM 1 +#define PMD_CACHE_NUM 1 +#define PGD_CACHE_NUM 2 #else #define PTE_CACHE_NUM 0 #define PMD_CACHE_NUM 1 -- cgit v1.2.3 From d3d2176a0bc696b5365ce0e8f82a29a521d85fd0 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 10 Nov 2005 15:26:20 +1100 Subject: [PATCH] powerpc: Move more ppc64 files with no ppc32 equivalent to powerpc This patch moves a bunch more files from arch/ppc64 and include/asm-ppc64 which have no equivalents in ppc32 code into arch/powerpc and include/asm-powerpc. The file affected are: hvcall.h proc_ppc64.c sysfs.c lparcfg.c rtas_pci.c The only changes apart from the move and corresponding Makefile changes are: - #ifndef/#define in includes updated to _ASM_POWERPC_ form - trailing whitespace removed - comments giving full paths removed Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built for 32-bit powermac (ARCH=powerpc). Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 8 +- arch/powerpc/kernel/lparcfg.c | 612 +++++++++++++++++++++++++++++++++++++++ arch/powerpc/kernel/proc_ppc64.c | 126 ++++++++ arch/powerpc/kernel/rtas_pci.c | 513 ++++++++++++++++++++++++++++++++ arch/powerpc/kernel/sysfs.c | 384 ++++++++++++++++++++++++ arch/ppc64/kernel/Makefile | 5 +- arch/ppc64/kernel/lparcfg.c | 612 --------------------------------------- arch/ppc64/kernel/proc_ppc64.c | 128 -------- arch/ppc64/kernel/rtas_pci.c | 513 -------------------------------- arch/ppc64/kernel/sysfs.c | 384 ------------------------ include/asm-powerpc/hvcall.h | 173 +++++++++++ include/asm-ppc64/hvcall.h | 173 ----------- 12 files changed, 1815 insertions(+), 1816 deletions(-) create mode 100644 arch/powerpc/kernel/lparcfg.c create mode 100644 arch/powerpc/kernel/proc_ppc64.c create mode 100644 arch/powerpc/kernel/rtas_pci.c create mode 100644 arch/powerpc/kernel/sysfs.c delete mode 100644 arch/ppc64/kernel/lparcfg.c delete mode 100644 arch/ppc64/kernel/proc_ppc64.c delete mode 100644 arch/ppc64/kernel/rtas_pci.c delete mode 100644 arch/ppc64/kernel/sysfs.c create mode 100644 include/asm-powerpc/hvcall.h delete mode 100644 include/asm-ppc64/hvcall.h (limited to 'include') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 92cfabf929bc..c04bbd320594 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -16,13 +16,17 @@ obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o \ paca.o ioctl32.o cpu_setup_power4.o \ - firmware.o + firmware.o sysfs.o obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o -obj-$(CONFIG_PPC_RTAS) += rtas.o +procfs-$(CONFIG_PPC64) := proc_ppc64.o +obj-$(CONFIG_PROC_FS) += $(procfs-y) +rtaspci-$(CONFIG_PPC64) := rtas_pci.o +obj-$(CONFIG_PPC_RTAS) += rtas.o $(rtaspci-y) obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o +obj-$(CONFIG_LPARCFG) += lparcfg.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c new file mode 100644 index 000000000000..5e954fae031f --- /dev/null +++ b/arch/powerpc/kernel/lparcfg.c @@ -0,0 +1,612 @@ +/* + * PowerPC64 LPAR Configuration Information Driver + * + * Dave Engebretsen engebret@us.ibm.com + * Copyright (c) 2003 Dave Engebretsen + * Will Schmidt willschm@us.ibm.com + * SPLPAR updates, Copyright (c) 2003 Will Schmidt IBM Corporation. + * seq_file updates, Copyright (c) 2004 Will Schmidt IBM Corporation. + * Nathan Lynch nathanl@austin.ibm.com + * Added lparcfg_write, Copyright (C) 2004 Nathan Lynch IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This driver creates a proc file at /proc/ppc64/lparcfg which contains + * keyword - value pairs that specify the configuration of the partition. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MODULE_VERS "1.6" +#define MODULE_NAME "lparcfg" + +/* #define LPARCFG_DEBUG */ + +/* find a better place for this function... */ +void log_plpar_hcall_return(unsigned long rc, char *tag) +{ + if (rc == 0) /* success, return */ + return; +/* check for null tag ? */ + if (rc == H_Hardware) + printk(KERN_INFO + "plpar-hcall (%s) failed with hardware fault\n", tag); + else if (rc == H_Function) + printk(KERN_INFO + "plpar-hcall (%s) failed; function not allowed\n", tag); + else if (rc == H_Authority) + printk(KERN_INFO + "plpar-hcall (%s) failed; not authorized to this function\n", + tag); + else if (rc == H_Parameter) + printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n", + tag); + else + printk(KERN_INFO + "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n", + tag, rc); + +} + +static struct proc_dir_entry *proc_ppc64_lparcfg; +#define LPARCFG_BUFF_SIZE 4096 + +#ifdef CONFIG_PPC_ISERIES + +/* + * For iSeries legacy systems, the PPA purr function is available from the + * emulated_time_base field in the paca. + */ +static unsigned long get_purr(void) +{ + unsigned long sum_purr = 0; + int cpu; + struct paca_struct *lpaca; + + for_each_cpu(cpu) { + lpaca = paca + cpu; + sum_purr += lpaca->lppaca.emulated_time_base; + +#ifdef PURR_DEBUG + printk(KERN_INFO "get_purr for cpu (%d) has value (%ld) \n", + cpu, lpaca->lppaca.emulated_time_base); +#endif + } + return sum_purr; +} + +#define lparcfg_write NULL + +/* + * Methods used to fetch LPAR data when running on an iSeries platform. + */ +static int lparcfg_data(struct seq_file *m, void *v) +{ + unsigned long pool_id, lp_index; + int shared, entitled_capacity, max_entitled_capacity; + int processors, max_processors; + struct paca_struct *lpaca = get_paca(); + unsigned long purr = get_purr(); + + seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); + + shared = (int)(lpaca->lppaca_ptr->shared_proc); + seq_printf(m, "serial_number=%c%c%c%c%c%c%c\n", + e2a(xItExtVpdPanel.mfgID[2]), + e2a(xItExtVpdPanel.mfgID[3]), + e2a(xItExtVpdPanel.systemSerial[1]), + e2a(xItExtVpdPanel.systemSerial[2]), + e2a(xItExtVpdPanel.systemSerial[3]), + e2a(xItExtVpdPanel.systemSerial[4]), + e2a(xItExtVpdPanel.systemSerial[5])); + + seq_printf(m, "system_type=%c%c%c%c\n", + e2a(xItExtVpdPanel.machineType[0]), + e2a(xItExtVpdPanel.machineType[1]), + e2a(xItExtVpdPanel.machineType[2]), + e2a(xItExtVpdPanel.machineType[3])); + + lp_index = HvLpConfig_getLpIndex(); + seq_printf(m, "partition_id=%d\n", (int)lp_index); + + seq_printf(m, "system_active_processors=%d\n", + (int)HvLpConfig_getSystemPhysicalProcessors()); + + seq_printf(m, "system_potential_processors=%d\n", + (int)HvLpConfig_getSystemPhysicalProcessors()); + + processors = (int)HvLpConfig_getPhysicalProcessors(); + seq_printf(m, "partition_active_processors=%d\n", processors); + + max_processors = (int)HvLpConfig_getMaxPhysicalProcessors(); + seq_printf(m, "partition_potential_processors=%d\n", max_processors); + + if (shared) { + entitled_capacity = HvLpConfig_getSharedProcUnits(); + max_entitled_capacity = HvLpConfig_getMaxSharedProcUnits(); + } else { + entitled_capacity = processors * 100; + max_entitled_capacity = max_processors * 100; + } + seq_printf(m, "partition_entitled_capacity=%d\n", entitled_capacity); + + seq_printf(m, "partition_max_entitled_capacity=%d\n", + max_entitled_capacity); + + if (shared) { + pool_id = HvLpConfig_getSharedPoolIndex(); + seq_printf(m, "pool=%d\n", (int)pool_id); + seq_printf(m, "pool_capacity=%d\n", + (int)(HvLpConfig_getNumProcsInSharedPool(pool_id) * + 100)); + seq_printf(m, "purr=%ld\n", purr); + } + + seq_printf(m, "shared_processor_mode=%d\n", shared); + + return 0; +} +#endif /* CONFIG_PPC_ISERIES */ + +#ifdef CONFIG_PPC_PSERIES +/* + * Methods used to fetch LPAR data when running on a pSeries platform. + */ + +/* + * H_GET_PPP hcall returns info in 4 parms. + * entitled_capacity,unallocated_capacity, + * aggregation, resource_capability). + * + * R4 = Entitled Processor Capacity Percentage. + * R5 = Unallocated Processor Capacity Percentage. + * R6 (AABBCCDDEEFFGGHH). + * XXXX - reserved (0) + * XXXX - reserved (0) + * XXXX - Group Number + * XXXX - Pool Number. + * R7 (IIJJKKLLMMNNOOPP). + * XX - reserved. (0) + * XX - bit 0-6 reserved (0). bit 7 is Capped indicator. + * XX - variable processor Capacity Weight + * XX - Unallocated Variable Processor Capacity Weight. + * XXXX - Active processors in Physical Processor Pool. + * XXXX - Processors active on platform. + */ +static unsigned int h_get_ppp(unsigned long *entitled, + unsigned long *unallocated, + unsigned long *aggregation, + unsigned long *resource) +{ + unsigned long rc; + rc = plpar_hcall_4out(H_GET_PPP, 0, 0, 0, 0, entitled, unallocated, + aggregation, resource); + + log_plpar_hcall_return(rc, "H_GET_PPP"); + + return rc; +} + +static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs) +{ + unsigned long rc; + unsigned long dummy; + rc = plpar_hcall(H_PIC, 0, 0, 0, 0, pool_idle_time, num_procs, &dummy); + + log_plpar_hcall_return(rc, "H_PIC"); +} + +static unsigned long get_purr(void); + +/* Track sum of all purrs across all processors. This is used to further */ +/* calculate usage values by different applications */ + +static unsigned long get_purr(void) +{ + unsigned long sum_purr = 0; + int cpu; + struct cpu_usage *cu; + + for_each_cpu(cpu) { + cu = &per_cpu(cpu_usage_array, cpu); + sum_purr += cu->current_tb; + } + return sum_purr; +} + +#define SPLPAR_CHARACTERISTICS_TOKEN 20 +#define SPLPAR_MAXLENGTH 1026*(sizeof(char)) + +/* + * parse_system_parameter_string() + * Retrieve the potential_processors, max_entitled_capacity and friends + * through the get-system-parameter rtas call. Replace keyword strings as + * necessary. + */ +static void parse_system_parameter_string(struct seq_file *m) +{ + int call_status; + + char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); + if (!local_buffer) { + printk(KERN_ERR "%s %s kmalloc failure at line %d \n", + __FILE__, __FUNCTION__, __LINE__); + return; + } + + spin_lock(&rtas_data_buf_lock); + memset(rtas_data_buf, 0, SPLPAR_MAXLENGTH); + call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1, + NULL, + SPLPAR_CHARACTERISTICS_TOKEN, + __pa(rtas_data_buf)); + memcpy(local_buffer, rtas_data_buf, SPLPAR_MAXLENGTH); + spin_unlock(&rtas_data_buf_lock); + + if (call_status != 0) { + printk(KERN_INFO + "%s %s Error calling get-system-parameter (0x%x)\n", + __FILE__, __FUNCTION__, call_status); + } else { + int splpar_strlen; + int idx, w_idx; + char *workbuffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); + if (!workbuffer) { + printk(KERN_ERR "%s %s kmalloc failure at line %d \n", + __FILE__, __FUNCTION__, __LINE__); + kfree(local_buffer); + return; + } +#ifdef LPARCFG_DEBUG + printk(KERN_INFO "success calling get-system-parameter \n"); +#endif + splpar_strlen = local_buffer[0] * 16 + local_buffer[1]; + local_buffer += 2; /* step over strlen value */ + + memset(workbuffer, 0, SPLPAR_MAXLENGTH); + w_idx = 0; + idx = 0; + while ((*local_buffer) && (idx < splpar_strlen)) { + workbuffer[w_idx++] = local_buffer[idx++]; + if ((local_buffer[idx] == ',') + || (local_buffer[idx] == '\0')) { + workbuffer[w_idx] = '\0'; + if (w_idx) { + /* avoid the empty string */ + seq_printf(m, "%s\n", workbuffer); + } + memset(workbuffer, 0, SPLPAR_MAXLENGTH); + idx++; /* skip the comma */ + w_idx = 0; + } else if (local_buffer[idx] == '=') { + /* code here to replace workbuffer contents + with different keyword strings */ + if (0 == strcmp(workbuffer, "MaxEntCap")) { + strcpy(workbuffer, + "partition_max_entitled_capacity"); + w_idx = strlen(workbuffer); + } + if (0 == strcmp(workbuffer, "MaxPlatProcs")) { + strcpy(workbuffer, + "system_potential_processors"); + w_idx = strlen(workbuffer); + } + } + } + kfree(workbuffer); + local_buffer -= 2; /* back up over strlen value */ + } + kfree(local_buffer); +} + +static int lparcfg_count_active_processors(void); + +/* Return the number of processors in the system. + * This function reads through the device tree and counts + * the virtual processors, this does not include threads. + */ +static int lparcfg_count_active_processors(void) +{ + struct device_node *cpus_dn = NULL; + int count = 0; + + while ((cpus_dn = of_find_node_by_type(cpus_dn, "cpu"))) { +#ifdef LPARCFG_DEBUG + printk(KERN_ERR "cpus_dn %p \n", cpus_dn); +#endif + count++; + } + return count; +} + +static int lparcfg_data(struct seq_file *m, void *v) +{ + int partition_potential_processors; + int partition_active_processors; + struct device_node *rootdn; + const char *model = ""; + const char *system_id = ""; + unsigned int *lp_index_ptr, lp_index = 0; + struct device_node *rtas_node; + int *lrdrp; + + rootdn = find_path_device("/"); + if (rootdn) { + model = get_property(rootdn, "model", NULL); + system_id = get_property(rootdn, "system-id", NULL); + lp_index_ptr = (unsigned int *) + get_property(rootdn, "ibm,partition-no", NULL); + if (lp_index_ptr) + lp_index = *lp_index_ptr; + } + + seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); + + seq_printf(m, "serial_number=%s\n", system_id); + + seq_printf(m, "system_type=%s\n", model); + + seq_printf(m, "partition_id=%d\n", (int)lp_index); + + rtas_node = find_path_device("/rtas"); + lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", NULL); + + if (lrdrp == NULL) { + partition_potential_processors = _systemcfg->processorCount; + } else { + partition_potential_processors = *(lrdrp + 4); + } + + partition_active_processors = lparcfg_count_active_processors(); + + if (firmware_has_feature(FW_FEATURE_SPLPAR)) { + unsigned long h_entitled, h_unallocated; + unsigned long h_aggregation, h_resource; + unsigned long pool_idle_time, pool_procs; + unsigned long purr; + + h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation, + &h_resource); + + seq_printf(m, "R4=0x%lx\n", h_entitled); + seq_printf(m, "R5=0x%lx\n", h_unallocated); + seq_printf(m, "R6=0x%lx\n", h_aggregation); + seq_printf(m, "R7=0x%lx\n", h_resource); + + purr = get_purr(); + + /* this call handles the ibm,get-system-parameter contents */ + parse_system_parameter_string(m); + + seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled); + + seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff); + + seq_printf(m, "system_active_processors=%ld\n", + (h_resource >> 0 * 8) & 0xffff); + + /* pool related entries are apropriate for shared configs */ + if (paca[0].lppaca.shared_proc) { + + h_pic(&pool_idle_time, &pool_procs); + + seq_printf(m, "pool=%ld\n", + (h_aggregation >> 0 * 8) & 0xffff); + + /* report pool_capacity in percentage */ + seq_printf(m, "pool_capacity=%ld\n", + ((h_resource >> 2 * 8) & 0xffff) * 100); + + seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time); + + seq_printf(m, "pool_num_procs=%ld\n", pool_procs); + } + + seq_printf(m, "unallocated_capacity_weight=%ld\n", + (h_resource >> 4 * 8) & 0xFF); + + seq_printf(m, "capacity_weight=%ld\n", + (h_resource >> 5 * 8) & 0xFF); + + seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01); + + seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated); + + seq_printf(m, "purr=%ld\n", purr); + + } else { /* non SPLPAR case */ + + seq_printf(m, "system_active_processors=%d\n", + partition_potential_processors); + + seq_printf(m, "system_potential_processors=%d\n", + partition_potential_processors); + + seq_printf(m, "partition_max_entitled_capacity=%d\n", + partition_potential_processors * 100); + + seq_printf(m, "partition_entitled_capacity=%d\n", + partition_active_processors * 100); + } + + seq_printf(m, "partition_active_processors=%d\n", + partition_active_processors); + + seq_printf(m, "partition_potential_processors=%d\n", + partition_potential_processors); + + seq_printf(m, "shared_processor_mode=%d\n", paca[0].lppaca.shared_proc); + + return 0; +} + +/* + * Interface for changing system parameters (variable capacity weight + * and entitled capacity). Format of input is "param_name=value"; + * anything after value is ignored. Valid parameters at this time are + * "partition_entitled_capacity" and "capacity_weight". We use + * H_SET_PPP to alter parameters. + * + * This function should be invoked only on systems with + * FW_FEATURE_SPLPAR. + */ +static ssize_t lparcfg_write(struct file *file, const char __user * buf, + size_t count, loff_t * off) +{ + char *kbuf; + char *tmp; + u64 new_entitled, *new_entitled_ptr = &new_entitled; + u8 new_weight, *new_weight_ptr = &new_weight; + + unsigned long current_entitled; /* parameters for h_get_ppp */ + unsigned long dummy; + unsigned long resource; + u8 current_weight; + + ssize_t retval = -ENOMEM; + + kbuf = kmalloc(count, GFP_KERNEL); + if (!kbuf) + goto out; + + retval = -EFAULT; + if (copy_from_user(kbuf, buf, count)) + goto out; + + retval = -EINVAL; + kbuf[count - 1] = '\0'; + tmp = strchr(kbuf, '='); + if (!tmp) + goto out; + + *tmp++ = '\0'; + + if (!strcmp(kbuf, "partition_entitled_capacity")) { + char *endp; + *new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10); + if (endp == tmp) + goto out; + new_weight_ptr = ¤t_weight; + } else if (!strcmp(kbuf, "capacity_weight")) { + char *endp; + *new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10); + if (endp == tmp) + goto out; + new_entitled_ptr = ¤t_entitled; + } else + goto out; + + /* Get our current parameters */ + retval = h_get_ppp(¤t_entitled, &dummy, &dummy, &resource); + if (retval) { + retval = -EIO; + goto out; + } + + current_weight = (resource >> 5 * 8) & 0xFF; + + pr_debug("%s: current_entitled = %lu, current_weight = %lu\n", + __FUNCTION__, current_entitled, current_weight); + + pr_debug("%s: new_entitled = %lu, new_weight = %lu\n", + __FUNCTION__, *new_entitled_ptr, *new_weight_ptr); + + retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr, + *new_weight_ptr); + + if (retval == H_Success || retval == H_Constrained) { + retval = count; + } else if (retval == H_Busy) { + retval = -EBUSY; + } else if (retval == H_Hardware) { + retval = -EIO; + } else if (retval == H_Parameter) { + retval = -EINVAL; + } else { + printk(KERN_WARNING "%s: received unknown hv return code %ld", + __FUNCTION__, retval); + retval = -EIO; + } + + out: + kfree(kbuf); + return retval; +} + +#endif /* CONFIG_PPC_PSERIES */ + +static int lparcfg_open(struct inode *inode, struct file *file) +{ + return single_open(file, lparcfg_data, NULL); +} + +struct file_operations lparcfg_fops = { + .owner = THIS_MODULE, + .read = seq_read, + .open = lparcfg_open, + .release = single_release, +}; + +int __init lparcfg_init(void) +{ + struct proc_dir_entry *ent; + mode_t mode = S_IRUSR | S_IRGRP | S_IROTH; + + /* Allow writing if we have FW_FEATURE_SPLPAR */ + if (firmware_has_feature(FW_FEATURE_SPLPAR)) { + lparcfg_fops.write = lparcfg_write; + mode |= S_IWUSR; + } + + ent = create_proc_entry("ppc64/lparcfg", mode, NULL); + if (ent) { + ent->proc_fops = &lparcfg_fops; + ent->data = kmalloc(LPARCFG_BUFF_SIZE, GFP_KERNEL); + if (!ent->data) { + printk(KERN_ERR + "Failed to allocate buffer for lparcfg\n"); + remove_proc_entry("lparcfg", ent->parent); + return -ENOMEM; + } + } else { + printk(KERN_ERR "Failed to create ppc64/lparcfg\n"); + return -EIO; + } + + proc_ppc64_lparcfg = ent; + return 0; +} + +void __exit lparcfg_cleanup(void) +{ + if (proc_ppc64_lparcfg) { + kfree(proc_ppc64_lparcfg->data); + remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent); + } +} + +module_init(lparcfg_init); +module_exit(lparcfg_cleanup); +MODULE_DESCRIPTION("Interface for LPAR configuration data"); +MODULE_AUTHOR("Dave Engebretsen"); +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/kernel/proc_ppc64.c b/arch/powerpc/kernel/proc_ppc64.c new file mode 100644 index 000000000000..a1c19502fe8b --- /dev/null +++ b/arch/powerpc/kernel/proc_ppc64.c @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +static loff_t page_map_seek( struct file *file, loff_t off, int whence); +static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos); +static int page_map_mmap( struct file *file, struct vm_area_struct *vma ); + +static struct file_operations page_map_fops = { + .llseek = page_map_seek, + .read = page_map_read, + .mmap = page_map_mmap +}; + +/* + * Create the ppc64 and ppc64/rtas directories early. This allows us to + * assume that they have been previously created in drivers. + */ +static int __init proc_ppc64_create(void) +{ + struct proc_dir_entry *root; + + root = proc_mkdir("ppc64", NULL); + if (!root) + return 1; + + if (!(platform_is_pseries() || _machine == PLATFORM_CELL)) + return 0; + + if (!proc_mkdir("rtas", root)) + return 1; + + if (!proc_symlink("rtas", NULL, "ppc64/rtas")) + return 1; + + return 0; +} +core_initcall(proc_ppc64_create); + +static int __init proc_ppc64_init(void) +{ + struct proc_dir_entry *pde; + + pde = create_proc_entry("ppc64/systemcfg", S_IFREG|S_IRUGO, NULL); + if (!pde) + return 1; + pde->nlink = 1; + pde->data = _systemcfg; + pde->size = PAGE_SIZE; + pde->proc_fops = &page_map_fops; + + return 0; +} +__initcall(proc_ppc64_init); + +static loff_t page_map_seek( struct file *file, loff_t off, int whence) +{ + loff_t new; + struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); + + switch(whence) { + case 0: + new = off; + break; + case 1: + new = file->f_pos + off; + break; + case 2: + new = dp->size + off; + break; + default: + return -EINVAL; + } + if ( new < 0 || new > dp->size ) + return -EINVAL; + return (file->f_pos = new); +} + +static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); + return simple_read_from_buffer(buf, nbytes, ppos, dp->data, dp->size); +} + +static int page_map_mmap( struct file *file, struct vm_area_struct *vma ) +{ + struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); + + vma->vm_flags |= VM_SHM | VM_LOCKED; + + if ((vma->vm_end - vma->vm_start) > dp->size) + return -EINVAL; + + remap_pfn_range(vma, vma->vm_start, __pa(dp->data) >> PAGE_SHIFT, + dp->size, vma->vm_page_prot); + return 0; +} + diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c new file mode 100644 index 000000000000..0e5a8e116653 --- /dev/null +++ b/arch/powerpc/kernel/rtas_pci.c @@ -0,0 +1,513 @@ +/* + * arch/ppc64/kernel/rtas_pci.c + * + * Copyright (C) 2001 Dave Engebretsen, IBM Corporation + * Copyright (C) 2003 Anton Blanchard , IBM + * + * RTAS specific routines for PCI. + * + * Based on code from pci.c, chrp_pci.c and pSeries_pci.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* RTAS tokens */ +static int read_pci_config; +static int write_pci_config; +static int ibm_read_pci_config; +static int ibm_write_pci_config; + +static inline int config_access_valid(struct pci_dn *dn, int where) +{ + if (where < 256) + return 1; + if (where < 4096 && dn->pci_ext_config_space) + return 1; + + return 0; +} + +static int of_device_available(struct device_node * dn) +{ + char * status; + + status = get_property(dn, "status", NULL); + + if (!status) + return 1; + + if (!strcmp(status, "okay")) + return 1; + + return 0; +} + +static int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val) +{ + int returnval = -1; + unsigned long buid, addr; + int ret; + + if (!pdn) + return PCIBIOS_DEVICE_NOT_FOUND; + if (!config_access_valid(pdn, where)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + addr = ((where & 0xf00) << 20) | (pdn->busno << 16) | + (pdn->devfn << 8) | (where & 0xff); + buid = pdn->phb->buid; + if (buid) { + ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, + addr, BUID_HI(buid), BUID_LO(buid), size); + } else { + ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); + } + *val = returnval; + + if (ret) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (returnval == EEH_IO_ERROR_VALUE(size) && + eeh_dn_check_failure (pdn->node, NULL)) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +static int rtas_pci_read_config(struct pci_bus *bus, + unsigned int devfn, + int where, int size, u32 *val) +{ + struct device_node *busdn, *dn; + + if (bus->self) + busdn = pci_device_to_OF_node(bus->self); + else + busdn = bus->sysdata; /* must be a phb */ + + /* Search only direct children of the bus */ + for (dn = busdn->child; dn; dn = dn->sibling) { + struct pci_dn *pdn = PCI_DN(dn); + if (pdn && pdn->devfn == devfn + && of_device_available(dn)) + return rtas_read_config(pdn, where, size, val); + } + + return PCIBIOS_DEVICE_NOT_FOUND; +} + +int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val) +{ + unsigned long buid, addr; + int ret; + + if (!pdn) + return PCIBIOS_DEVICE_NOT_FOUND; + if (!config_access_valid(pdn, where)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + addr = ((where & 0xf00) << 20) | (pdn->busno << 16) | + (pdn->devfn << 8) | (where & 0xff); + buid = pdn->phb->buid; + if (buid) { + ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, + BUID_HI(buid), BUID_LO(buid), size, (ulong) val); + } else { + ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); + } + + if (ret) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +static int rtas_pci_write_config(struct pci_bus *bus, + unsigned int devfn, + int where, int size, u32 val) +{ + struct device_node *busdn, *dn; + + if (bus->self) + busdn = pci_device_to_OF_node(bus->self); + else + busdn = bus->sysdata; /* must be a phb */ + + /* Search only direct children of the bus */ + for (dn = busdn->child; dn; dn = dn->sibling) { + struct pci_dn *pdn = PCI_DN(dn); + if (pdn && pdn->devfn == devfn + && of_device_available(dn)) + return rtas_write_config(pdn, where, size, val); + } + return PCIBIOS_DEVICE_NOT_FOUND; +} + +struct pci_ops rtas_pci_ops = { + rtas_pci_read_config, + rtas_pci_write_config +}; + +int is_python(struct device_node *dev) +{ + char *model = (char *)get_property(dev, "model", NULL); + + if (model && strstr(model, "Python")) + return 1; + + return 0; +} + +static int get_phb_reg_prop(struct device_node *dev, + unsigned int addr_size_words, + struct reg_property64 *reg) +{ + unsigned int *ui_ptr = NULL, len; + + /* Found a PHB, now figure out where his registers are mapped. */ + ui_ptr = (unsigned int *)get_property(dev, "reg", &len); + if (ui_ptr == NULL) + return 1; + + if (addr_size_words == 1) { + reg->address = ((struct reg_property32 *)ui_ptr)->address; + reg->size = ((struct reg_property32 *)ui_ptr)->size; + } else { + *reg = *((struct reg_property64 *)ui_ptr); + } + + return 0; +} + +static void python_countermeasures(struct device_node *dev, + unsigned int addr_size_words) +{ + struct reg_property64 reg_struct; + void __iomem *chip_regs; + volatile u32 val; + + if (get_phb_reg_prop(dev, addr_size_words, ®_struct)) + return; + + /* Python's register file is 1 MB in size. */ + chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); + + /* + * Firmware doesn't always clear this bit which is critical + * for good performance - Anton + */ + +#define PRG_CL_RESET_VALID 0x00010000 + + val = in_be32(chip_regs + 0xf6030); + if (val & PRG_CL_RESET_VALID) { + printk(KERN_INFO "Python workaround: "); + val &= ~PRG_CL_RESET_VALID; + out_be32(chip_regs + 0xf6030, val); + /* + * We must read it back for changes to + * take effect + */ + val = in_be32(chip_regs + 0xf6030); + printk("reg0: %x\n", val); + } + + iounmap(chip_regs); +} + +void __init init_pci_config_tokens (void) +{ + read_pci_config = rtas_token("read-pci-config"); + write_pci_config = rtas_token("write-pci-config"); + ibm_read_pci_config = rtas_token("ibm,read-pci-config"); + ibm_write_pci_config = rtas_token("ibm,write-pci-config"); +} + +unsigned long __devinit get_phb_buid (struct device_node *phb) +{ + int addr_cells; + unsigned int *buid_vals; + unsigned int len; + unsigned long buid; + + if (ibm_read_pci_config == -1) return 0; + + /* PHB's will always be children of the root node, + * or so it is promised by the current firmware. */ + if (phb->parent == NULL) + return 0; + if (phb->parent->parent) + return 0; + + buid_vals = (unsigned int *) get_property(phb, "reg", &len); + if (buid_vals == NULL) + return 0; + + addr_cells = prom_n_addr_cells(phb); + if (addr_cells == 1) { + buid = (unsigned long) buid_vals[0]; + } else { + buid = (((unsigned long)buid_vals[0]) << 32UL) | + (((unsigned long)buid_vals[1]) & 0xffffffff); + } + return buid; +} + +static int phb_set_bus_ranges(struct device_node *dev, + struct pci_controller *phb) +{ + int *bus_range; + unsigned int len; + + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + return 1; + } + + phb->first_busno = bus_range[0]; + phb->last_busno = bus_range[1]; + + return 0; +} + +static int __devinit setup_phb(struct device_node *dev, + struct pci_controller *phb, + unsigned int addr_size_words) +{ + pci_setup_pci_controller(phb); + + if (is_python(dev)) + python_countermeasures(dev, addr_size_words); + + if (phb_set_bus_ranges(dev, phb)) + return 1; + + phb->arch_data = dev; + phb->ops = &rtas_pci_ops; + phb->buid = get_phb_buid(dev); + + return 0; +} + +static void __devinit add_linux_pci_domain(struct device_node *dev, + struct pci_controller *phb, + struct property *of_prop) +{ + memset(of_prop, 0, sizeof(struct property)); + of_prop->name = "linux,pci-domain"; + of_prop->length = sizeof(phb->global_number); + of_prop->value = (unsigned char *)&of_prop[1]; + memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number)); + prom_add_property(dev, of_prop); +} + +static struct pci_controller * __init alloc_phb(struct device_node *dev, + unsigned int addr_size_words) +{ + struct pci_controller *phb; + struct property *of_prop; + + phb = alloc_bootmem(sizeof(struct pci_controller)); + if (phb == NULL) + return NULL; + + of_prop = alloc_bootmem(sizeof(struct property) + + sizeof(phb->global_number)); + if (!of_prop) + return NULL; + + if (setup_phb(dev, phb, addr_size_words)) + return NULL; + + add_linux_pci_domain(dev, phb, of_prop); + + return phb; +} + +static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words) +{ + struct pci_controller *phb; + + phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), + GFP_KERNEL); + if (phb == NULL) + return NULL; + + if (setup_phb(dev, phb, addr_size_words)) + return NULL; + + phb->is_dynamic = 1; + + /* TODO: linux,pci-domain? */ + + return phb; +} + +unsigned long __init find_and_init_phbs(void) +{ + struct device_node *node; + struct pci_controller *phb; + unsigned int root_size_cells = 0; + unsigned int index; + unsigned int *opprop = NULL; + struct device_node *root = of_find_node_by_path("/"); + + if (ppc64_interrupt_controller == IC_OPEN_PIC) { + opprop = (unsigned int *)get_property(root, + "platform-open-pic", NULL); + } + + root_size_cells = prom_n_size_cells(root); + + index = 0; + + for (node = of_get_next_child(root, NULL); + node != NULL; + node = of_get_next_child(root, node)) { + if (node->type == NULL || strcmp(node->type, "pci") != 0) + continue; + + phb = alloc_phb(node, root_size_cells); + if (!phb) + continue; + + pci_process_bridge_OF_ranges(phb, node, 0); + pci_setup_phb_io(phb, index == 0); +#ifdef CONFIG_PPC_PSERIES + if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) { + int addr = root_size_cells * (index + 2) - 1; + mpic_assign_isu(pSeries_mpic, index, opprop[addr]); + } +#endif + index++; + } + + of_node_put(root); + pci_devs_phb_init(); + + /* + * pci_probe_only and pci_assign_all_buses can be set via properties + * in chosen. + */ + if (of_chosen) { + int *prop; + + prop = (int *)get_property(of_chosen, "linux,pci-probe-only", + NULL); + if (prop) + pci_probe_only = *prop; + + prop = (int *)get_property(of_chosen, + "linux,pci-assign-all-buses", NULL); + if (prop) + pci_assign_all_buses = *prop; + } + + return 0; +} + +struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) +{ + struct device_node *root = of_find_node_by_path("/"); + unsigned int root_size_cells = 0; + struct pci_controller *phb; + int primary; + + root_size_cells = prom_n_size_cells(root); + + primary = list_empty(&hose_list); + phb = alloc_phb_dynamic(dn, root_size_cells); + if (!phb) + return NULL; + + pci_process_bridge_OF_ranges(phb, dn, primary); + + pci_setup_phb_io_dynamic(phb, primary); + of_node_put(root); + + pci_devs_phb_init_dynamic(phb); + scan_phb(phb); + + return phb; +} +EXPORT_SYMBOL(init_phb_dynamic); + +/* RPA-specific bits for removing PHBs */ +int pcibios_remove_root_bus(struct pci_controller *phb) +{ + struct pci_bus *b = phb->bus; + struct resource *res; + int rc, i; + + res = b->resource[0]; + if (!res->flags) { + printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__, + b->name); + return 1; + } + + rc = unmap_bus_range(b); + if (rc) { + printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", + __FUNCTION__, b->name); + return 1; + } + + if (release_resource(res)) { + printk(KERN_ERR "%s: failed to release IO on bus %s\n", + __FUNCTION__, b->name); + return 1; + } + + for (i = 1; i < 3; ++i) { + res = b->resource[i]; + if (!res->flags && i == 0) { + printk(KERN_ERR "%s: no MEM resource for PHB %s\n", + __FUNCTION__, b->name); + return 1; + } + if (res->flags && release_resource(res)) { + printk(KERN_ERR + "%s: failed to release IO %d on bus %s\n", + __FUNCTION__, i, b->name); + return 1; + } + } + + list_del(&phb->list_node); + if (phb->is_dynamic) + kfree(phb); + + return 0; +} +EXPORT_SYMBOL(pcibios_remove_root_bus); diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c new file mode 100644 index 000000000000..850af198fb5f --- /dev/null +++ b/arch/powerpc/kernel/sysfs.c @@ -0,0 +1,384 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static DEFINE_PER_CPU(struct cpu, cpu_devices); + +/* SMT stuff */ + +#ifdef CONFIG_PPC_MULTIPLATFORM +/* default to snooze disabled */ +DEFINE_PER_CPU(unsigned long, smt_snooze_delay); + +static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf, + size_t count) +{ + struct cpu *cpu = container_of(dev, struct cpu, sysdev); + ssize_t ret; + unsigned long snooze; + + ret = sscanf(buf, "%lu", &snooze); + if (ret != 1) + return -EINVAL; + + per_cpu(smt_snooze_delay, cpu->sysdev.id) = snooze; + + return count; +} + +static ssize_t show_smt_snooze_delay(struct sys_device *dev, char *buf) +{ + struct cpu *cpu = container_of(dev, struct cpu, sysdev); + + return sprintf(buf, "%lu\n", per_cpu(smt_snooze_delay, cpu->sysdev.id)); +} + +static SYSDEV_ATTR(smt_snooze_delay, 0644, show_smt_snooze_delay, + store_smt_snooze_delay); + +/* Only parse OF options if the matching cmdline option was not specified */ +static int smt_snooze_cmdline; + +static int __init smt_setup(void) +{ + struct device_node *options; + unsigned int *val; + unsigned int cpu; + + if (!cpu_has_feature(CPU_FTR_SMT)) + return 1; + + options = find_path_device("/options"); + if (!options) + return 1; + + val = (unsigned int *)get_property(options, "ibm,smt-snooze-delay", + NULL); + if (!smt_snooze_cmdline && val) { + for_each_cpu(cpu) + per_cpu(smt_snooze_delay, cpu) = *val; + } + + return 1; +} +__initcall(smt_setup); + +static int __init setup_smt_snooze_delay(char *str) +{ + unsigned int cpu; + int snooze; + + if (!cpu_has_feature(CPU_FTR_SMT)) + return 1; + + smt_snooze_cmdline = 1; + + if (get_option(&str, &snooze)) { + for_each_cpu(cpu) + per_cpu(smt_snooze_delay, cpu) = snooze; + } + + return 1; +} +__setup("smt-snooze-delay=", setup_smt_snooze_delay); + +#endif /* CONFIG_PPC_MULTIPLATFORM */ + +/* + * Enabling PMCs will slow partition context switch times so we only do + * it the first time we write to the PMCs. + */ + +static DEFINE_PER_CPU(char, pmcs_enabled); + +void ppc64_enable_pmcs(void) +{ + /* Only need to enable them once */ + if (__get_cpu_var(pmcs_enabled)) + return; + + __get_cpu_var(pmcs_enabled) = 1; + + if (ppc_md.enable_pmcs) + ppc_md.enable_pmcs(); +} +EXPORT_SYMBOL(ppc64_enable_pmcs); + +/* XXX convert to rusty's on_one_cpu */ +static unsigned long run_on_cpu(unsigned long cpu, + unsigned long (*func)(unsigned long), + unsigned long arg) +{ + cpumask_t old_affinity = current->cpus_allowed; + unsigned long ret; + + /* should return -EINVAL to userspace */ + if (set_cpus_allowed(current, cpumask_of_cpu(cpu))) + return 0; + + ret = func(arg); + + set_cpus_allowed(current, old_affinity); + + return ret; +} + +#define SYSFS_PMCSETUP(NAME, ADDRESS) \ +static unsigned long read_##NAME(unsigned long junk) \ +{ \ + return mfspr(ADDRESS); \ +} \ +static unsigned long write_##NAME(unsigned long val) \ +{ \ + ppc64_enable_pmcs(); \ + mtspr(ADDRESS, val); \ + return 0; \ +} \ +static ssize_t show_##NAME(struct sys_device *dev, char *buf) \ +{ \ + struct cpu *cpu = container_of(dev, struct cpu, sysdev); \ + unsigned long val = run_on_cpu(cpu->sysdev.id, read_##NAME, 0); \ + return sprintf(buf, "%lx\n", val); \ +} \ +static ssize_t __attribute_used__ \ + store_##NAME(struct sys_device *dev, const char *buf, size_t count) \ +{ \ + struct cpu *cpu = container_of(dev, struct cpu, sysdev); \ + unsigned long val; \ + int ret = sscanf(buf, "%lx", &val); \ + if (ret != 1) \ + return -EINVAL; \ + run_on_cpu(cpu->sysdev.id, write_##NAME, val); \ + return count; \ +} + +SYSFS_PMCSETUP(mmcr0, SPRN_MMCR0); +SYSFS_PMCSETUP(mmcr1, SPRN_MMCR1); +SYSFS_PMCSETUP(mmcra, SPRN_MMCRA); +SYSFS_PMCSETUP(pmc1, SPRN_PMC1); +SYSFS_PMCSETUP(pmc2, SPRN_PMC2); +SYSFS_PMCSETUP(pmc3, SPRN_PMC3); +SYSFS_PMCSETUP(pmc4, SPRN_PMC4); +SYSFS_PMCSETUP(pmc5, SPRN_PMC5); +SYSFS_PMCSETUP(pmc6, SPRN_PMC6); +SYSFS_PMCSETUP(pmc7, SPRN_PMC7); +SYSFS_PMCSETUP(pmc8, SPRN_PMC8); +SYSFS_PMCSETUP(purr, SPRN_PURR); + +static SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0); +static SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1); +static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra); +static SYSDEV_ATTR(pmc1, 0600, show_pmc1, store_pmc1); +static SYSDEV_ATTR(pmc2, 0600, show_pmc2, store_pmc2); +static SYSDEV_ATTR(pmc3, 0600, show_pmc3, store_pmc3); +static SYSDEV_ATTR(pmc4, 0600, show_pmc4, store_pmc4); +static SYSDEV_ATTR(pmc5, 0600, show_pmc5, store_pmc5); +static SYSDEV_ATTR(pmc6, 0600, show_pmc6, store_pmc6); +static SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7); +static SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8); +static SYSDEV_ATTR(purr, 0600, show_purr, NULL); + +static void register_cpu_online(unsigned int cpu) +{ + struct cpu *c = &per_cpu(cpu_devices, cpu); + struct sys_device *s = &c->sysdev; + +#ifndef CONFIG_PPC_ISERIES + if (cpu_has_feature(CPU_FTR_SMT)) + sysdev_create_file(s, &attr_smt_snooze_delay); +#endif + + /* PMC stuff */ + + sysdev_create_file(s, &attr_mmcr0); + sysdev_create_file(s, &attr_mmcr1); + + if (cpu_has_feature(CPU_FTR_MMCRA)) + sysdev_create_file(s, &attr_mmcra); + + if (cur_cpu_spec->num_pmcs >= 1) + sysdev_create_file(s, &attr_pmc1); + if (cur_cpu_spec->num_pmcs >= 2) + sysdev_create_file(s, &attr_pmc2); + if (cur_cpu_spec->num_pmcs >= 3) + sysdev_create_file(s, &attr_pmc3); + if (cur_cpu_spec->num_pmcs >= 4) + sysdev_create_file(s, &attr_pmc4); + if (cur_cpu_spec->num_pmcs >= 5) + sysdev_create_file(s, &attr_pmc5); + if (cur_cpu_spec->num_pmcs >= 6) + sysdev_create_file(s, &attr_pmc6); + if (cur_cpu_spec->num_pmcs >= 7) + sysdev_create_file(s, &attr_pmc7); + if (cur_cpu_spec->num_pmcs >= 8) + sysdev_create_file(s, &attr_pmc8); + + if (cpu_has_feature(CPU_FTR_SMT)) + sysdev_create_file(s, &attr_purr); +} + +#ifdef CONFIG_HOTPLUG_CPU +static void unregister_cpu_online(unsigned int cpu) +{ + struct cpu *c = &per_cpu(cpu_devices, cpu); + struct sys_device *s = &c->sysdev; + + BUG_ON(c->no_control); + +#ifndef CONFIG_PPC_ISERIES + if (cpu_has_feature(CPU_FTR_SMT)) + sysdev_remove_file(s, &attr_smt_snooze_delay); +#endif + + /* PMC stuff */ + + sysdev_remove_file(s, &attr_mmcr0); + sysdev_remove_file(s, &attr_mmcr1); + + if (cpu_has_feature(CPU_FTR_MMCRA)) + sysdev_remove_file(s, &attr_mmcra); + + if (cur_cpu_spec->num_pmcs >= 1) + sysdev_remove_file(s, &attr_pmc1); + if (cur_cpu_spec->num_pmcs >= 2) + sysdev_remove_file(s, &attr_pmc2); + if (cur_cpu_spec->num_pmcs >= 3) + sysdev_remove_file(s, &attr_pmc3); + if (cur_cpu_spec->num_pmcs >= 4) + sysdev_remove_file(s, &attr_pmc4); + if (cur_cpu_spec->num_pmcs >= 5) + sysdev_remove_file(s, &attr_pmc5); + if (cur_cpu_spec->num_pmcs >= 6) + sysdev_remove_file(s, &attr_pmc6); + if (cur_cpu_spec->num_pmcs >= 7) + sysdev_remove_file(s, &attr_pmc7); + if (cur_cpu_spec->num_pmcs >= 8) + sysdev_remove_file(s, &attr_pmc8); + + if (cpu_has_feature(CPU_FTR_SMT)) + sysdev_remove_file(s, &attr_purr); +} +#endif /* CONFIG_HOTPLUG_CPU */ + +static int __devinit sysfs_cpu_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned int)(long)hcpu; + + switch (action) { + case CPU_ONLINE: + register_cpu_online(cpu); + break; +#ifdef CONFIG_HOTPLUG_CPU + case CPU_DEAD: + unregister_cpu_online(cpu); + break; +#endif + } + return NOTIFY_OK; +} + +static struct notifier_block __devinitdata sysfs_cpu_nb = { + .notifier_call = sysfs_cpu_notify, +}; + +/* NUMA stuff */ + +#ifdef CONFIG_NUMA +static struct node node_devices[MAX_NUMNODES]; + +static void register_nodes(void) +{ + int i; + + for (i = 0; i < MAX_NUMNODES; i++) { + if (node_online(i)) { + int p_node = parent_node(i); + struct node *parent = NULL; + + if (p_node != i) + parent = &node_devices[p_node]; + + register_node(&node_devices[i], i, parent); + } + } +} +#else +static void register_nodes(void) +{ + return; +} +#endif + +/* Only valid if CPU is present. */ +static ssize_t show_physical_id(struct sys_device *dev, char *buf) +{ + struct cpu *cpu = container_of(dev, struct cpu, sysdev); + + return sprintf(buf, "%d\n", get_hard_smp_processor_id(cpu->sysdev.id)); +} +static SYSDEV_ATTR(physical_id, 0444, show_physical_id, NULL); + +static int __init topology_init(void) +{ + int cpu; + struct node *parent = NULL; + + register_nodes(); + + register_cpu_notifier(&sysfs_cpu_nb); + + for_each_cpu(cpu) { + struct cpu *c = &per_cpu(cpu_devices, cpu); + +#ifdef CONFIG_NUMA + /* The node to which a cpu belongs can't be known + * until the cpu is made present. + */ + parent = NULL; + if (cpu_present(cpu)) + parent = &node_devices[cpu_to_node(cpu)]; +#endif + /* + * For now, we just see if the system supports making + * the RTAS calls for CPU hotplug. But, there may be a + * more comprehensive way to do this for an individual + * CPU. For instance, the boot cpu might never be valid + * for hotplugging. + */ + if (!ppc_md.cpu_die) + c->no_control = 1; + + if (cpu_online(cpu) || (c->no_control == 0)) { + register_cpu(c, cpu, parent); + + sysdev_create_file(&c->sysdev, &attr_physical_id); + } + + if (cpu_online(cpu)) + register_cpu_online(cpu); + } + + return 0; +} +__initcall(topology_init); diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index 048ba910f028..58b19f107656 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -15,7 +15,7 @@ obj-y += idle.o dma.o \ align.o \ udbg.o \ rtc.o \ - iommu.o sysfs.o vdso.o + iommu.o vdso.o obj-y += vdso32/ vdso64/ pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o @@ -30,13 +30,10 @@ endif obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o obj-$(CONFIG_KEXEC) += machine_kexec.o -obj-$(CONFIG_PROC_FS) += proc_ppc64.o obj-$(CONFIG_MODULES) += module.o ifneq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_MODULES) += ppc_ksyms.o endif -obj-$(CONFIG_PPC_RTAS) += rtas_pci.o -obj-$(CONFIG_LPARCFG) += lparcfg.o obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o ifneq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_BOOTX_TEXT) += btext.o diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/ppc64/kernel/lparcfg.c deleted file mode 100644 index a80ed307515c..000000000000 --- a/arch/ppc64/kernel/lparcfg.c +++ /dev/null @@ -1,612 +0,0 @@ -/* - * PowerPC64 LPAR Configuration Information Driver - * - * Dave Engebretsen engebret@us.ibm.com - * Copyright (c) 2003 Dave Engebretsen - * Will Schmidt willschm@us.ibm.com - * SPLPAR updates, Copyright (c) 2003 Will Schmidt IBM Corporation. - * seq_file updates, Copyright (c) 2004 Will Schmidt IBM Corporation. - * Nathan Lynch nathanl@austin.ibm.com - * Added lparcfg_write, Copyright (C) 2004 Nathan Lynch IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * This driver creates a proc file at /proc/ppc64/lparcfg which contains - * keyword - value pairs that specify the configuration of the partition. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MODULE_VERS "1.6" -#define MODULE_NAME "lparcfg" - -/* #define LPARCFG_DEBUG */ - -/* find a better place for this function... */ -void log_plpar_hcall_return(unsigned long rc, char *tag) -{ - if (rc == 0) /* success, return */ - return; -/* check for null tag ? */ - if (rc == H_Hardware) - printk(KERN_INFO - "plpar-hcall (%s) failed with hardware fault\n", tag); - else if (rc == H_Function) - printk(KERN_INFO - "plpar-hcall (%s) failed; function not allowed\n", tag); - else if (rc == H_Authority) - printk(KERN_INFO - "plpar-hcall (%s) failed; not authorized to this function\n", - tag); - else if (rc == H_Parameter) - printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n", - tag); - else - printk(KERN_INFO - "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n", - tag, rc); - -} - -static struct proc_dir_entry *proc_ppc64_lparcfg; -#define LPARCFG_BUFF_SIZE 4096 - -#ifdef CONFIG_PPC_ISERIES - -/* - * For iSeries legacy systems, the PPA purr function is available from the - * emulated_time_base field in the paca. - */ -static unsigned long get_purr(void) -{ - unsigned long sum_purr = 0; - int cpu; - struct paca_struct *lpaca; - - for_each_cpu(cpu) { - lpaca = paca + cpu; - sum_purr += lpaca->lppaca.emulated_time_base; - -#ifdef PURR_DEBUG - printk(KERN_INFO "get_purr for cpu (%d) has value (%ld) \n", - cpu, lpaca->lppaca.emulated_time_base); -#endif - } - return sum_purr; -} - -#define lparcfg_write NULL - -/* - * Methods used to fetch LPAR data when running on an iSeries platform. - */ -static int lparcfg_data(struct seq_file *m, void *v) -{ - unsigned long pool_id, lp_index; - int shared, entitled_capacity, max_entitled_capacity; - int processors, max_processors; - struct paca_struct *lpaca = get_paca(); - unsigned long purr = get_purr(); - - seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); - - shared = (int)(lpaca->lppaca_ptr->shared_proc); - seq_printf(m, "serial_number=%c%c%c%c%c%c%c\n", - e2a(xItExtVpdPanel.mfgID[2]), - e2a(xItExtVpdPanel.mfgID[3]), - e2a(xItExtVpdPanel.systemSerial[1]), - e2a(xItExtVpdPanel.systemSerial[2]), - e2a(xItExtVpdPanel.systemSerial[3]), - e2a(xItExtVpdPanel.systemSerial[4]), - e2a(xItExtVpdPanel.systemSerial[5])); - - seq_printf(m, "system_type=%c%c%c%c\n", - e2a(xItExtVpdPanel.machineType[0]), - e2a(xItExtVpdPanel.machineType[1]), - e2a(xItExtVpdPanel.machineType[2]), - e2a(xItExtVpdPanel.machineType[3])); - - lp_index = HvLpConfig_getLpIndex(); - seq_printf(m, "partition_id=%d\n", (int)lp_index); - - seq_printf(m, "system_active_processors=%d\n", - (int)HvLpConfig_getSystemPhysicalProcessors()); - - seq_printf(m, "system_potential_processors=%d\n", - (int)HvLpConfig_getSystemPhysicalProcessors()); - - processors = (int)HvLpConfig_getPhysicalProcessors(); - seq_printf(m, "partition_active_processors=%d\n", processors); - - max_processors = (int)HvLpConfig_getMaxPhysicalProcessors(); - seq_printf(m, "partition_potential_processors=%d\n", max_processors); - - if (shared) { - entitled_capacity = HvLpConfig_getSharedProcUnits(); - max_entitled_capacity = HvLpConfig_getMaxSharedProcUnits(); - } else { - entitled_capacity = processors * 100; - max_entitled_capacity = max_processors * 100; - } - seq_printf(m, "partition_entitled_capacity=%d\n", entitled_capacity); - - seq_printf(m, "partition_max_entitled_capacity=%d\n", - max_entitled_capacity); - - if (shared) { - pool_id = HvLpConfig_getSharedPoolIndex(); - seq_printf(m, "pool=%d\n", (int)pool_id); - seq_printf(m, "pool_capacity=%d\n", - (int)(HvLpConfig_getNumProcsInSharedPool(pool_id) * - 100)); - seq_printf(m, "purr=%ld\n", purr); - } - - seq_printf(m, "shared_processor_mode=%d\n", shared); - - return 0; -} -#endif /* CONFIG_PPC_ISERIES */ - -#ifdef CONFIG_PPC_PSERIES -/* - * Methods used to fetch LPAR data when running on a pSeries platform. - */ - -/* - * H_GET_PPP hcall returns info in 4 parms. - * entitled_capacity,unallocated_capacity, - * aggregation, resource_capability). - * - * R4 = Entitled Processor Capacity Percentage. - * R5 = Unallocated Processor Capacity Percentage. - * R6 (AABBCCDDEEFFGGHH). - * XXXX - reserved (0) - * XXXX - reserved (0) - * XXXX - Group Number - * XXXX - Pool Number. - * R7 (IIJJKKLLMMNNOOPP). - * XX - reserved. (0) - * XX - bit 0-6 reserved (0). bit 7 is Capped indicator. - * XX - variable processor Capacity Weight - * XX - Unallocated Variable Processor Capacity Weight. - * XXXX - Active processors in Physical Processor Pool. - * XXXX - Processors active on platform. - */ -static unsigned int h_get_ppp(unsigned long *entitled, - unsigned long *unallocated, - unsigned long *aggregation, - unsigned long *resource) -{ - unsigned long rc; - rc = plpar_hcall_4out(H_GET_PPP, 0, 0, 0, 0, entitled, unallocated, - aggregation, resource); - - log_plpar_hcall_return(rc, "H_GET_PPP"); - - return rc; -} - -static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs) -{ - unsigned long rc; - unsigned long dummy; - rc = plpar_hcall(H_PIC, 0, 0, 0, 0, pool_idle_time, num_procs, &dummy); - - log_plpar_hcall_return(rc, "H_PIC"); -} - -static unsigned long get_purr(void); - -/* Track sum of all purrs across all processors. This is used to further */ -/* calculate usage values by different applications */ - -static unsigned long get_purr(void) -{ - unsigned long sum_purr = 0; - int cpu; - struct cpu_usage *cu; - - for_each_cpu(cpu) { - cu = &per_cpu(cpu_usage_array, cpu); - sum_purr += cu->current_tb; - } - return sum_purr; -} - -#define SPLPAR_CHARACTERISTICS_TOKEN 20 -#define SPLPAR_MAXLENGTH 1026*(sizeof(char)) - -/* - * parse_system_parameter_string() - * Retrieve the potential_processors, max_entitled_capacity and friends - * through the get-system-parameter rtas call. Replace keyword strings as - * necessary. - */ -static void parse_system_parameter_string(struct seq_file *m) -{ - int call_status; - - char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); - if (!local_buffer) { - printk(KERN_ERR "%s %s kmalloc failure at line %d \n", - __FILE__, __FUNCTION__, __LINE__); - return; - } - - spin_lock(&rtas_data_buf_lock); - memset(rtas_data_buf, 0, SPLPAR_MAXLENGTH); - call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1, - NULL, - SPLPAR_CHARACTERISTICS_TOKEN, - __pa(rtas_data_buf)); - memcpy(local_buffer, rtas_data_buf, SPLPAR_MAXLENGTH); - spin_unlock(&rtas_data_buf_lock); - - if (call_status != 0) { - printk(KERN_INFO - "%s %s Error calling get-system-parameter (0x%x)\n", - __FILE__, __FUNCTION__, call_status); - } else { - int splpar_strlen; - int idx, w_idx; - char *workbuffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); - if (!workbuffer) { - printk(KERN_ERR "%s %s kmalloc failure at line %d \n", - __FILE__, __FUNCTION__, __LINE__); - kfree(local_buffer); - return; - } -#ifdef LPARCFG_DEBUG - printk(KERN_INFO "success calling get-system-parameter \n"); -#endif - splpar_strlen = local_buffer[0] * 16 + local_buffer[1]; - local_buffer += 2; /* step over strlen value */ - - memset(workbuffer, 0, SPLPAR_MAXLENGTH); - w_idx = 0; - idx = 0; - while ((*local_buffer) && (idx < splpar_strlen)) { - workbuffer[w_idx++] = local_buffer[idx++]; - if ((local_buffer[idx] == ',') - || (local_buffer[idx] == '\0')) { - workbuffer[w_idx] = '\0'; - if (w_idx) { - /* avoid the empty string */ - seq_printf(m, "%s\n", workbuffer); - } - memset(workbuffer, 0, SPLPAR_MAXLENGTH); - idx++; /* skip the comma */ - w_idx = 0; - } else if (local_buffer[idx] == '=') { - /* code here to replace workbuffer contents - with different keyword strings */ - if (0 == strcmp(workbuffer, "MaxEntCap")) { - strcpy(workbuffer, - "partition_max_entitled_capacity"); - w_idx = strlen(workbuffer); - } - if (0 == strcmp(workbuffer, "MaxPlatProcs")) { - strcpy(workbuffer, - "system_potential_processors"); - w_idx = strlen(workbuffer); - } - } - } - kfree(workbuffer); - local_buffer -= 2; /* back up over strlen value */ - } - kfree(local_buffer); -} - -static int lparcfg_count_active_processors(void); - -/* Return the number of processors in the system. - * This function reads through the device tree and counts - * the virtual processors, this does not include threads. - */ -static int lparcfg_count_active_processors(void) -{ - struct device_node *cpus_dn = NULL; - int count = 0; - - while ((cpus_dn = of_find_node_by_type(cpus_dn, "cpu"))) { -#ifdef LPARCFG_DEBUG - printk(KERN_ERR "cpus_dn %p \n", cpus_dn); -#endif - count++; - } - return count; -} - -static int lparcfg_data(struct seq_file *m, void *v) -{ - int partition_potential_processors; - int partition_active_processors; - struct device_node *rootdn; - const char *model = ""; - const char *system_id = ""; - unsigned int *lp_index_ptr, lp_index = 0; - struct device_node *rtas_node; - int *lrdrp; - - rootdn = find_path_device("/"); - if (rootdn) { - model = get_property(rootdn, "model", NULL); - system_id = get_property(rootdn, "system-id", NULL); - lp_index_ptr = (unsigned int *) - get_property(rootdn, "ibm,partition-no", NULL); - if (lp_index_ptr) - lp_index = *lp_index_ptr; - } - - seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); - - seq_printf(m, "serial_number=%s\n", system_id); - - seq_printf(m, "system_type=%s\n", model); - - seq_printf(m, "partition_id=%d\n", (int)lp_index); - - rtas_node = find_path_device("/rtas"); - lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", NULL); - - if (lrdrp == NULL) { - partition_potential_processors = _systemcfg->processorCount; - } else { - partition_potential_processors = *(lrdrp + 4); - } - - partition_active_processors = lparcfg_count_active_processors(); - - if (firmware_has_feature(FW_FEATURE_SPLPAR)) { - unsigned long h_entitled, h_unallocated; - unsigned long h_aggregation, h_resource; - unsigned long pool_idle_time, pool_procs; - unsigned long purr; - - h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation, - &h_resource); - - seq_printf(m, "R4=0x%lx\n", h_entitled); - seq_printf(m, "R5=0x%lx\n", h_unallocated); - seq_printf(m, "R6=0x%lx\n", h_aggregation); - seq_printf(m, "R7=0x%lx\n", h_resource); - - purr = get_purr(); - - /* this call handles the ibm,get-system-parameter contents */ - parse_system_parameter_string(m); - - seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled); - - seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff); - - seq_printf(m, "system_active_processors=%ld\n", - (h_resource >> 0 * 8) & 0xffff); - - /* pool related entries are apropriate for shared configs */ - if (paca[0].lppaca.shared_proc) { - - h_pic(&pool_idle_time, &pool_procs); - - seq_printf(m, "pool=%ld\n", - (h_aggregation >> 0 * 8) & 0xffff); - - /* report pool_capacity in percentage */ - seq_printf(m, "pool_capacity=%ld\n", - ((h_resource >> 2 * 8) & 0xffff) * 100); - - seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time); - - seq_printf(m, "pool_num_procs=%ld\n", pool_procs); - } - - seq_printf(m, "unallocated_capacity_weight=%ld\n", - (h_resource >> 4 * 8) & 0xFF); - - seq_printf(m, "capacity_weight=%ld\n", - (h_resource >> 5 * 8) & 0xFF); - - seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01); - - seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated); - - seq_printf(m, "purr=%ld\n", purr); - - } else { /* non SPLPAR case */ - - seq_printf(m, "system_active_processors=%d\n", - partition_potential_processors); - - seq_printf(m, "system_potential_processors=%d\n", - partition_potential_processors); - - seq_printf(m, "partition_max_entitled_capacity=%d\n", - partition_potential_processors * 100); - - seq_printf(m, "partition_entitled_capacity=%d\n", - partition_active_processors * 100); - } - - seq_printf(m, "partition_active_processors=%d\n", - partition_active_processors); - - seq_printf(m, "partition_potential_processors=%d\n", - partition_potential_processors); - - seq_printf(m, "shared_processor_mode=%d\n", paca[0].lppaca.shared_proc); - - return 0; -} - -/* - * Interface for changing system parameters (variable capacity weight - * and entitled capacity). Format of input is "param_name=value"; - * anything after value is ignored. Valid parameters at this time are - * "partition_entitled_capacity" and "capacity_weight". We use - * H_SET_PPP to alter parameters. - * - * This function should be invoked only on systems with - * FW_FEATURE_SPLPAR. - */ -static ssize_t lparcfg_write(struct file *file, const char __user * buf, - size_t count, loff_t * off) -{ - char *kbuf; - char *tmp; - u64 new_entitled, *new_entitled_ptr = &new_entitled; - u8 new_weight, *new_weight_ptr = &new_weight; - - unsigned long current_entitled; /* parameters for h_get_ppp */ - unsigned long dummy; - unsigned long resource; - u8 current_weight; - - ssize_t retval = -ENOMEM; - - kbuf = kmalloc(count, GFP_KERNEL); - if (!kbuf) - goto out; - - retval = -EFAULT; - if (copy_from_user(kbuf, buf, count)) - goto out; - - retval = -EINVAL; - kbuf[count - 1] = '\0'; - tmp = strchr(kbuf, '='); - if (!tmp) - goto out; - - *tmp++ = '\0'; - - if (!strcmp(kbuf, "partition_entitled_capacity")) { - char *endp; - *new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10); - if (endp == tmp) - goto out; - new_weight_ptr = ¤t_weight; - } else if (!strcmp(kbuf, "capacity_weight")) { - char *endp; - *new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10); - if (endp == tmp) - goto out; - new_entitled_ptr = ¤t_entitled; - } else - goto out; - - /* Get our current parameters */ - retval = h_get_ppp(¤t_entitled, &dummy, &dummy, &resource); - if (retval) { - retval = -EIO; - goto out; - } - - current_weight = (resource >> 5 * 8) & 0xFF; - - pr_debug("%s: current_entitled = %lu, current_weight = %lu\n", - __FUNCTION__, current_entitled, current_weight); - - pr_debug("%s: new_entitled = %lu, new_weight = %lu\n", - __FUNCTION__, *new_entitled_ptr, *new_weight_ptr); - - retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr, - *new_weight_ptr); - - if (retval == H_Success || retval == H_Constrained) { - retval = count; - } else if (retval == H_Busy) { - retval = -EBUSY; - } else if (retval == H_Hardware) { - retval = -EIO; - } else if (retval == H_Parameter) { - retval = -EINVAL; - } else { - printk(KERN_WARNING "%s: received unknown hv return code %ld", - __FUNCTION__, retval); - retval = -EIO; - } - - out: - kfree(kbuf); - return retval; -} - -#endif /* CONFIG_PPC_PSERIES */ - -static int lparcfg_open(struct inode *inode, struct file *file) -{ - return single_open(file, lparcfg_data, NULL); -} - -struct file_operations lparcfg_fops = { - .owner = THIS_MODULE, - .read = seq_read, - .open = lparcfg_open, - .release = single_release, -}; - -int __init lparcfg_init(void) -{ - struct proc_dir_entry *ent; - mode_t mode = S_IRUSR | S_IRGRP | S_IROTH; - - /* Allow writing if we have FW_FEATURE_SPLPAR */ - if (firmware_has_feature(FW_FEATURE_SPLPAR)) { - lparcfg_fops.write = lparcfg_write; - mode |= S_IWUSR; - } - - ent = create_proc_entry("ppc64/lparcfg", mode, NULL); - if (ent) { - ent->proc_fops = &lparcfg_fops; - ent->data = kmalloc(LPARCFG_BUFF_SIZE, GFP_KERNEL); - if (!ent->data) { - printk(KERN_ERR - "Failed to allocate buffer for lparcfg\n"); - remove_proc_entry("lparcfg", ent->parent); - return -ENOMEM; - } - } else { - printk(KERN_ERR "Failed to create ppc64/lparcfg\n"); - return -EIO; - } - - proc_ppc64_lparcfg = ent; - return 0; -} - -void __exit lparcfg_cleanup(void) -{ - if (proc_ppc64_lparcfg) { - kfree(proc_ppc64_lparcfg->data); - remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent); - } -} - -module_init(lparcfg_init); -module_exit(lparcfg_cleanup); -MODULE_DESCRIPTION("Interface for LPAR configuration data"); -MODULE_AUTHOR("Dave Engebretsen"); -MODULE_LICENSE("GPL"); diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/ppc64/kernel/proc_ppc64.c deleted file mode 100644 index c893a11ee198..000000000000 --- a/arch/ppc64/kernel/proc_ppc64.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * arch/ppc64/kernel/proc_ppc64.c - * - * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -static loff_t page_map_seek( struct file *file, loff_t off, int whence); -static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes, - loff_t *ppos); -static int page_map_mmap( struct file *file, struct vm_area_struct *vma ); - -static struct file_operations page_map_fops = { - .llseek = page_map_seek, - .read = page_map_read, - .mmap = page_map_mmap -}; - -/* - * Create the ppc64 and ppc64/rtas directories early. This allows us to - * assume that they have been previously created in drivers. - */ -static int __init proc_ppc64_create(void) -{ - struct proc_dir_entry *root; - - root = proc_mkdir("ppc64", NULL); - if (!root) - return 1; - - if (!(platform_is_pseries() || _machine == PLATFORM_CELL)) - return 0; - - if (!proc_mkdir("rtas", root)) - return 1; - - if (!proc_symlink("rtas", NULL, "ppc64/rtas")) - return 1; - - return 0; -} -core_initcall(proc_ppc64_create); - -static int __init proc_ppc64_init(void) -{ - struct proc_dir_entry *pde; - - pde = create_proc_entry("ppc64/systemcfg", S_IFREG|S_IRUGO, NULL); - if (!pde) - return 1; - pde->nlink = 1; - pde->data = _systemcfg; - pde->size = PAGE_SIZE; - pde->proc_fops = &page_map_fops; - - return 0; -} -__initcall(proc_ppc64_init); - -static loff_t page_map_seek( struct file *file, loff_t off, int whence) -{ - loff_t new; - struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); - - switch(whence) { - case 0: - new = off; - break; - case 1: - new = file->f_pos + off; - break; - case 2: - new = dp->size + off; - break; - default: - return -EINVAL; - } - if ( new < 0 || new > dp->size ) - return -EINVAL; - return (file->f_pos = new); -} - -static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes, - loff_t *ppos) -{ - struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); - return simple_read_from_buffer(buf, nbytes, ppos, dp->data, dp->size); -} - -static int page_map_mmap( struct file *file, struct vm_area_struct *vma ) -{ - struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); - - vma->vm_flags |= VM_SHM | VM_LOCKED; - - if ((vma->vm_end - vma->vm_start) > dp->size) - return -EINVAL; - - remap_pfn_range(vma, vma->vm_start, __pa(dp->data) >> PAGE_SHIFT, - dp->size, vma->vm_page_prot); - return 0; -} - diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/ppc64/kernel/rtas_pci.c deleted file mode 100644 index 0e5a8e116653..000000000000 --- a/arch/ppc64/kernel/rtas_pci.c +++ /dev/null @@ -1,513 +0,0 @@ -/* - * arch/ppc64/kernel/rtas_pci.c - * - * Copyright (C) 2001 Dave Engebretsen, IBM Corporation - * Copyright (C) 2003 Anton Blanchard , IBM - * - * RTAS specific routines for PCI. - * - * Based on code from pci.c, chrp_pci.c and pSeries_pci.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* RTAS tokens */ -static int read_pci_config; -static int write_pci_config; -static int ibm_read_pci_config; -static int ibm_write_pci_config; - -static inline int config_access_valid(struct pci_dn *dn, int where) -{ - if (where < 256) - return 1; - if (where < 4096 && dn->pci_ext_config_space) - return 1; - - return 0; -} - -static int of_device_available(struct device_node * dn) -{ - char * status; - - status = get_property(dn, "status", NULL); - - if (!status) - return 1; - - if (!strcmp(status, "okay")) - return 1; - - return 0; -} - -static int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val) -{ - int returnval = -1; - unsigned long buid, addr; - int ret; - - if (!pdn) - return PCIBIOS_DEVICE_NOT_FOUND; - if (!config_access_valid(pdn, where)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - addr = ((where & 0xf00) << 20) | (pdn->busno << 16) | - (pdn->devfn << 8) | (where & 0xff); - buid = pdn->phb->buid; - if (buid) { - ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, - addr, BUID_HI(buid), BUID_LO(buid), size); - } else { - ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); - } - *val = returnval; - - if (ret) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (returnval == EEH_IO_ERROR_VALUE(size) && - eeh_dn_check_failure (pdn->node, NULL)) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int rtas_pci_read_config(struct pci_bus *bus, - unsigned int devfn, - int where, int size, u32 *val) -{ - struct device_node *busdn, *dn; - - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = bus->sysdata; /* must be a phb */ - - /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) { - struct pci_dn *pdn = PCI_DN(dn); - if (pdn && pdn->devfn == devfn - && of_device_available(dn)) - return rtas_read_config(pdn, where, size, val); - } - - return PCIBIOS_DEVICE_NOT_FOUND; -} - -int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val) -{ - unsigned long buid, addr; - int ret; - - if (!pdn) - return PCIBIOS_DEVICE_NOT_FOUND; - if (!config_access_valid(pdn, where)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - addr = ((where & 0xf00) << 20) | (pdn->busno << 16) | - (pdn->devfn << 8) | (where & 0xff); - buid = pdn->phb->buid; - if (buid) { - ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, - BUID_HI(buid), BUID_LO(buid), size, (ulong) val); - } else { - ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); - } - - if (ret) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int rtas_pci_write_config(struct pci_bus *bus, - unsigned int devfn, - int where, int size, u32 val) -{ - struct device_node *busdn, *dn; - - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = bus->sysdata; /* must be a phb */ - - /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) { - struct pci_dn *pdn = PCI_DN(dn); - if (pdn && pdn->devfn == devfn - && of_device_available(dn)) - return rtas_write_config(pdn, where, size, val); - } - return PCIBIOS_DEVICE_NOT_FOUND; -} - -struct pci_ops rtas_pci_ops = { - rtas_pci_read_config, - rtas_pci_write_config -}; - -int is_python(struct device_node *dev) -{ - char *model = (char *)get_property(dev, "model", NULL); - - if (model && strstr(model, "Python")) - return 1; - - return 0; -} - -static int get_phb_reg_prop(struct device_node *dev, - unsigned int addr_size_words, - struct reg_property64 *reg) -{ - unsigned int *ui_ptr = NULL, len; - - /* Found a PHB, now figure out where his registers are mapped. */ - ui_ptr = (unsigned int *)get_property(dev, "reg", &len); - if (ui_ptr == NULL) - return 1; - - if (addr_size_words == 1) { - reg->address = ((struct reg_property32 *)ui_ptr)->address; - reg->size = ((struct reg_property32 *)ui_ptr)->size; - } else { - *reg = *((struct reg_property64 *)ui_ptr); - } - - return 0; -} - -static void python_countermeasures(struct device_node *dev, - unsigned int addr_size_words) -{ - struct reg_property64 reg_struct; - void __iomem *chip_regs; - volatile u32 val; - - if (get_phb_reg_prop(dev, addr_size_words, ®_struct)) - return; - - /* Python's register file is 1 MB in size. */ - chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); - - /* - * Firmware doesn't always clear this bit which is critical - * for good performance - Anton - */ - -#define PRG_CL_RESET_VALID 0x00010000 - - val = in_be32(chip_regs + 0xf6030); - if (val & PRG_CL_RESET_VALID) { - printk(KERN_INFO "Python workaround: "); - val &= ~PRG_CL_RESET_VALID; - out_be32(chip_regs + 0xf6030, val); - /* - * We must read it back for changes to - * take effect - */ - val = in_be32(chip_regs + 0xf6030); - printk("reg0: %x\n", val); - } - - iounmap(chip_regs); -} - -void __init init_pci_config_tokens (void) -{ - read_pci_config = rtas_token("read-pci-config"); - write_pci_config = rtas_token("write-pci-config"); - ibm_read_pci_config = rtas_token("ibm,read-pci-config"); - ibm_write_pci_config = rtas_token("ibm,write-pci-config"); -} - -unsigned long __devinit get_phb_buid (struct device_node *phb) -{ - int addr_cells; - unsigned int *buid_vals; - unsigned int len; - unsigned long buid; - - if (ibm_read_pci_config == -1) return 0; - - /* PHB's will always be children of the root node, - * or so it is promised by the current firmware. */ - if (phb->parent == NULL) - return 0; - if (phb->parent->parent) - return 0; - - buid_vals = (unsigned int *) get_property(phb, "reg", &len); - if (buid_vals == NULL) - return 0; - - addr_cells = prom_n_addr_cells(phb); - if (addr_cells == 1) { - buid = (unsigned long) buid_vals[0]; - } else { - buid = (((unsigned long)buid_vals[0]) << 32UL) | - (((unsigned long)buid_vals[1]) & 0xffffffff); - } - return buid; -} - -static int phb_set_bus_ranges(struct device_node *dev, - struct pci_controller *phb) -{ - int *bus_range; - unsigned int len; - - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - return 1; - } - - phb->first_busno = bus_range[0]; - phb->last_busno = bus_range[1]; - - return 0; -} - -static int __devinit setup_phb(struct device_node *dev, - struct pci_controller *phb, - unsigned int addr_size_words) -{ - pci_setup_pci_controller(phb); - - if (is_python(dev)) - python_countermeasures(dev, addr_size_words); - - if (phb_set_bus_ranges(dev, phb)) - return 1; - - phb->arch_data = dev; - phb->ops = &rtas_pci_ops; - phb->buid = get_phb_buid(dev); - - return 0; -} - -static void __devinit add_linux_pci_domain(struct device_node *dev, - struct pci_controller *phb, - struct property *of_prop) -{ - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(phb->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number)); - prom_add_property(dev, of_prop); -} - -static struct pci_controller * __init alloc_phb(struct device_node *dev, - unsigned int addr_size_words) -{ - struct pci_controller *phb; - struct property *of_prop; - - phb = alloc_bootmem(sizeof(struct pci_controller)); - if (phb == NULL) - return NULL; - - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(phb->global_number)); - if (!of_prop) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - add_linux_pci_domain(dev, phb, of_prop); - - return phb; -} - -static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words) -{ - struct pci_controller *phb; - - phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), - GFP_KERNEL); - if (phb == NULL) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - phb->is_dynamic = 1; - - /* TODO: linux,pci-domain? */ - - return phb; -} - -unsigned long __init find_and_init_phbs(void) -{ - struct device_node *node; - struct pci_controller *phb; - unsigned int root_size_cells = 0; - unsigned int index; - unsigned int *opprop = NULL; - struct device_node *root = of_find_node_by_path("/"); - - if (ppc64_interrupt_controller == IC_OPEN_PIC) { - opprop = (unsigned int *)get_property(root, - "platform-open-pic", NULL); - } - - root_size_cells = prom_n_size_cells(root); - - index = 0; - - for (node = of_get_next_child(root, NULL); - node != NULL; - node = of_get_next_child(root, node)) { - if (node->type == NULL || strcmp(node->type, "pci") != 0) - continue; - - phb = alloc_phb(node, root_size_cells); - if (!phb) - continue; - - pci_process_bridge_OF_ranges(phb, node, 0); - pci_setup_phb_io(phb, index == 0); -#ifdef CONFIG_PPC_PSERIES - if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) { - int addr = root_size_cells * (index + 2) - 1; - mpic_assign_isu(pSeries_mpic, index, opprop[addr]); - } -#endif - index++; - } - - of_node_put(root); - pci_devs_phb_init(); - - /* - * pci_probe_only and pci_assign_all_buses can be set via properties - * in chosen. - */ - if (of_chosen) { - int *prop; - - prop = (int *)get_property(of_chosen, "linux,pci-probe-only", - NULL); - if (prop) - pci_probe_only = *prop; - - prop = (int *)get_property(of_chosen, - "linux,pci-assign-all-buses", NULL); - if (prop) - pci_assign_all_buses = *prop; - } - - return 0; -} - -struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) -{ - struct device_node *root = of_find_node_by_path("/"); - unsigned int root_size_cells = 0; - struct pci_controller *phb; - int primary; - - root_size_cells = prom_n_size_cells(root); - - primary = list_empty(&hose_list); - phb = alloc_phb_dynamic(dn, root_size_cells); - if (!phb) - return NULL; - - pci_process_bridge_OF_ranges(phb, dn, primary); - - pci_setup_phb_io_dynamic(phb, primary); - of_node_put(root); - - pci_devs_phb_init_dynamic(phb); - scan_phb(phb); - - return phb; -} -EXPORT_SYMBOL(init_phb_dynamic); - -/* RPA-specific bits for removing PHBs */ -int pcibios_remove_root_bus(struct pci_controller *phb) -{ - struct pci_bus *b = phb->bus; - struct resource *res; - int rc, i; - - res = b->resource[0]; - if (!res->flags) { - printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__, - b->name); - return 1; - } - - rc = unmap_bus_range(b); - if (rc) { - printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", - __FUNCTION__, b->name); - return 1; - } - - if (release_resource(res)) { - printk(KERN_ERR "%s: failed to release IO on bus %s\n", - __FUNCTION__, b->name); - return 1; - } - - for (i = 1; i < 3; ++i) { - res = b->resource[i]; - if (!res->flags && i == 0) { - printk(KERN_ERR "%s: no MEM resource for PHB %s\n", - __FUNCTION__, b->name); - return 1; - } - if (res->flags && release_resource(res)) { - printk(KERN_ERR - "%s: failed to release IO %d on bus %s\n", - __FUNCTION__, i, b->name); - return 1; - } - } - - list_del(&phb->list_node); - if (phb->is_dynamic) - kfree(phb); - - return 0; -} -EXPORT_SYMBOL(pcibios_remove_root_bus); diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c deleted file mode 100644 index e99ec62c2c52..000000000000 --- a/arch/ppc64/kernel/sysfs.c +++ /dev/null @@ -1,384 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static DEFINE_PER_CPU(struct cpu, cpu_devices); - -/* SMT stuff */ - -#ifdef CONFIG_PPC_MULTIPLATFORM -/* default to snooze disabled */ -DEFINE_PER_CPU(unsigned long, smt_snooze_delay); - -static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf, - size_t count) -{ - struct cpu *cpu = container_of(dev, struct cpu, sysdev); - ssize_t ret; - unsigned long snooze; - - ret = sscanf(buf, "%lu", &snooze); - if (ret != 1) - return -EINVAL; - - per_cpu(smt_snooze_delay, cpu->sysdev.id) = snooze; - - return count; -} - -static ssize_t show_smt_snooze_delay(struct sys_device *dev, char *buf) -{ - struct cpu *cpu = container_of(dev, struct cpu, sysdev); - - return sprintf(buf, "%lu\n", per_cpu(smt_snooze_delay, cpu->sysdev.id)); -} - -static SYSDEV_ATTR(smt_snooze_delay, 0644, show_smt_snooze_delay, - store_smt_snooze_delay); - -/* Only parse OF options if the matching cmdline option was not specified */ -static int smt_snooze_cmdline; - -static int __init smt_setup(void) -{ - struct device_node *options; - unsigned int *val; - unsigned int cpu; - - if (!cpu_has_feature(CPU_FTR_SMT)) - return 1; - - options = find_path_device("/options"); - if (!options) - return 1; - - val = (unsigned int *)get_property(options, "ibm,smt-snooze-delay", - NULL); - if (!smt_snooze_cmdline && val) { - for_each_cpu(cpu) - per_cpu(smt_snooze_delay, cpu) = *val; - } - - return 1; -} -__initcall(smt_setup); - -static int __init setup_smt_snooze_delay(char *str) -{ - unsigned int cpu; - int snooze; - - if (!cpu_has_feature(CPU_FTR_SMT)) - return 1; - - smt_snooze_cmdline = 1; - - if (get_option(&str, &snooze)) { - for_each_cpu(cpu) - per_cpu(smt_snooze_delay, cpu) = snooze; - } - - return 1; -} -__setup("smt-snooze-delay=", setup_smt_snooze_delay); - -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -/* - * Enabling PMCs will slow partition context switch times so we only do - * it the first time we write to the PMCs. - */ - -static DEFINE_PER_CPU(char, pmcs_enabled); - -void ppc64_enable_pmcs(void) -{ - /* Only need to enable them once */ - if (__get_cpu_var(pmcs_enabled)) - return; - - __get_cpu_var(pmcs_enabled) = 1; - - if (ppc_md.enable_pmcs) - ppc_md.enable_pmcs(); -} -EXPORT_SYMBOL(ppc64_enable_pmcs); - -/* XXX convert to rusty's on_one_cpu */ -static unsigned long run_on_cpu(unsigned long cpu, - unsigned long (*func)(unsigned long), - unsigned long arg) -{ - cpumask_t old_affinity = current->cpus_allowed; - unsigned long ret; - - /* should return -EINVAL to userspace */ - if (set_cpus_allowed(current, cpumask_of_cpu(cpu))) - return 0; - - ret = func(arg); - - set_cpus_allowed(current, old_affinity); - - return ret; -} - -#define SYSFS_PMCSETUP(NAME, ADDRESS) \ -static unsigned long read_##NAME(unsigned long junk) \ -{ \ - return mfspr(ADDRESS); \ -} \ -static unsigned long write_##NAME(unsigned long val) \ -{ \ - ppc64_enable_pmcs(); \ - mtspr(ADDRESS, val); \ - return 0; \ -} \ -static ssize_t show_##NAME(struct sys_device *dev, char *buf) \ -{ \ - struct cpu *cpu = container_of(dev, struct cpu, sysdev); \ - unsigned long val = run_on_cpu(cpu->sysdev.id, read_##NAME, 0); \ - return sprintf(buf, "%lx\n", val); \ -} \ -static ssize_t __attribute_used__ \ - store_##NAME(struct sys_device *dev, const char *buf, size_t count) \ -{ \ - struct cpu *cpu = container_of(dev, struct cpu, sysdev); \ - unsigned long val; \ - int ret = sscanf(buf, "%lx", &val); \ - if (ret != 1) \ - return -EINVAL; \ - run_on_cpu(cpu->sysdev.id, write_##NAME, val); \ - return count; \ -} - -SYSFS_PMCSETUP(mmcr0, SPRN_MMCR0); -SYSFS_PMCSETUP(mmcr1, SPRN_MMCR1); -SYSFS_PMCSETUP(mmcra, SPRN_MMCRA); -SYSFS_PMCSETUP(pmc1, SPRN_PMC1); -SYSFS_PMCSETUP(pmc2, SPRN_PMC2); -SYSFS_PMCSETUP(pmc3, SPRN_PMC3); -SYSFS_PMCSETUP(pmc4, SPRN_PMC4); -SYSFS_PMCSETUP(pmc5, SPRN_PMC5); -SYSFS_PMCSETUP(pmc6, SPRN_PMC6); -SYSFS_PMCSETUP(pmc7, SPRN_PMC7); -SYSFS_PMCSETUP(pmc8, SPRN_PMC8); -SYSFS_PMCSETUP(purr, SPRN_PURR); - -static SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0); -static SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1); -static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra); -static SYSDEV_ATTR(pmc1, 0600, show_pmc1, store_pmc1); -static SYSDEV_ATTR(pmc2, 0600, show_pmc2, store_pmc2); -static SYSDEV_ATTR(pmc3, 0600, show_pmc3, store_pmc3); -static SYSDEV_ATTR(pmc4, 0600, show_pmc4, store_pmc4); -static SYSDEV_ATTR(pmc5, 0600, show_pmc5, store_pmc5); -static SYSDEV_ATTR(pmc6, 0600, show_pmc6, store_pmc6); -static SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7); -static SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8); -static SYSDEV_ATTR(purr, 0600, show_purr, NULL); - -static void register_cpu_online(unsigned int cpu) -{ - struct cpu *c = &per_cpu(cpu_devices, cpu); - struct sys_device *s = &c->sysdev; - -#ifndef CONFIG_PPC_ISERIES - if (cpu_has_feature(CPU_FTR_SMT)) - sysdev_create_file(s, &attr_smt_snooze_delay); -#endif - - /* PMC stuff */ - - sysdev_create_file(s, &attr_mmcr0); - sysdev_create_file(s, &attr_mmcr1); - - if (cpu_has_feature(CPU_FTR_MMCRA)) - sysdev_create_file(s, &attr_mmcra); - - if (cur_cpu_spec->num_pmcs >= 1) - sysdev_create_file(s, &attr_pmc1); - if (cur_cpu_spec->num_pmcs >= 2) - sysdev_create_file(s, &attr_pmc2); - if (cur_cpu_spec->num_pmcs >= 3) - sysdev_create_file(s, &attr_pmc3); - if (cur_cpu_spec->num_pmcs >= 4) - sysdev_create_file(s, &attr_pmc4); - if (cur_cpu_spec->num_pmcs >= 5) - sysdev_create_file(s, &attr_pmc5); - if (cur_cpu_spec->num_pmcs >= 6) - sysdev_create_file(s, &attr_pmc6); - if (cur_cpu_spec->num_pmcs >= 7) - sysdev_create_file(s, &attr_pmc7); - if (cur_cpu_spec->num_pmcs >= 8) - sysdev_create_file(s, &attr_pmc8); - - if (cpu_has_feature(CPU_FTR_SMT)) - sysdev_create_file(s, &attr_purr); -} - -#ifdef CONFIG_HOTPLUG_CPU -static void unregister_cpu_online(unsigned int cpu) -{ - struct cpu *c = &per_cpu(cpu_devices, cpu); - struct sys_device *s = &c->sysdev; - - BUG_ON(c->no_control); - -#ifndef CONFIG_PPC_ISERIES - if (cpu_has_feature(CPU_FTR_SMT)) - sysdev_remove_file(s, &attr_smt_snooze_delay); -#endif - - /* PMC stuff */ - - sysdev_remove_file(s, &attr_mmcr0); - sysdev_remove_file(s, &attr_mmcr1); - - if (cpu_has_feature(CPU_FTR_MMCRA)) - sysdev_remove_file(s, &attr_mmcra); - - if (cur_cpu_spec->num_pmcs >= 1) - sysdev_remove_file(s, &attr_pmc1); - if (cur_cpu_spec->num_pmcs >= 2) - sysdev_remove_file(s, &attr_pmc2); - if (cur_cpu_spec->num_pmcs >= 3) - sysdev_remove_file(s, &attr_pmc3); - if (cur_cpu_spec->num_pmcs >= 4) - sysdev_remove_file(s, &attr_pmc4); - if (cur_cpu_spec->num_pmcs >= 5) - sysdev_remove_file(s, &attr_pmc5); - if (cur_cpu_spec->num_pmcs >= 6) - sysdev_remove_file(s, &attr_pmc6); - if (cur_cpu_spec->num_pmcs >= 7) - sysdev_remove_file(s, &attr_pmc7); - if (cur_cpu_spec->num_pmcs >= 8) - sysdev_remove_file(s, &attr_pmc8); - - if (cpu_has_feature(CPU_FTR_SMT)) - sysdev_remove_file(s, &attr_purr); -} -#endif /* CONFIG_HOTPLUG_CPU */ - -static int __devinit sysfs_cpu_notify(struct notifier_block *self, - unsigned long action, void *hcpu) -{ - unsigned int cpu = (unsigned int)(long)hcpu; - - switch (action) { - case CPU_ONLINE: - register_cpu_online(cpu); - break; -#ifdef CONFIG_HOTPLUG_CPU - case CPU_DEAD: - unregister_cpu_online(cpu); - break; -#endif - } - return NOTIFY_OK; -} - -static struct notifier_block __devinitdata sysfs_cpu_nb = { - .notifier_call = sysfs_cpu_notify, -}; - -/* NUMA stuff */ - -#ifdef CONFIG_NUMA -static struct node node_devices[MAX_NUMNODES]; - -static void register_nodes(void) -{ - int i; - - for (i = 0; i < MAX_NUMNODES; i++) { - if (node_online(i)) { - int p_node = parent_node(i); - struct node *parent = NULL; - - if (p_node != i) - parent = &node_devices[p_node]; - - register_node(&node_devices[i], i, parent); - } - } -} -#else -static void register_nodes(void) -{ - return; -} -#endif - -/* Only valid if CPU is present. */ -static ssize_t show_physical_id(struct sys_device *dev, char *buf) -{ - struct cpu *cpu = container_of(dev, struct cpu, sysdev); - - return sprintf(buf, "%d\n", get_hard_smp_processor_id(cpu->sysdev.id)); -} -static SYSDEV_ATTR(physical_id, 0444, show_physical_id, NULL); - -static int __init topology_init(void) -{ - int cpu; - struct node *parent = NULL; - - register_nodes(); - - register_cpu_notifier(&sysfs_cpu_nb); - - for_each_cpu(cpu) { - struct cpu *c = &per_cpu(cpu_devices, cpu); - -#ifdef CONFIG_NUMA - /* The node to which a cpu belongs can't be known - * until the cpu is made present. - */ - parent = NULL; - if (cpu_present(cpu)) - parent = &node_devices[cpu_to_node(cpu)]; -#endif - /* - * For now, we just see if the system supports making - * the RTAS calls for CPU hotplug. But, there may be a - * more comprehensive way to do this for an individual - * CPU. For instance, the boot cpu might never be valid - * for hotplugging. - */ - if (!ppc_md.cpu_die) - c->no_control = 1; - - if (cpu_online(cpu) || (c->no_control == 0)) { - register_cpu(c, cpu, parent); - - sysdev_create_file(&c->sysdev, &attr_physical_id); - } - - if (cpu_online(cpu)) - register_cpu_online(cpu); - } - - return 0; -} -__initcall(topology_init); diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h new file mode 100644 index 000000000000..d36da61dbc53 --- /dev/null +++ b/include/asm-powerpc/hvcall.h @@ -0,0 +1,173 @@ +#ifndef _ASM_POWERPC_HVCALL_H +#define _ASM_POWERPC_HVCALL_H + +#define HVSC .long 0x44000022 + +#define H_Success 0 +#define H_Busy 1 /* Hardware busy -- retry later */ +#define H_Constrained 4 /* Resource request constrained to max allowed */ +#define H_LongBusyStartRange 9900 /* Start of long busy range */ +#define H_LongBusyOrder1msec 9900 /* Long busy, hint that 1msec is a good time to retry */ +#define H_LongBusyOrder10msec 9901 /* Long busy, hint that 10msec is a good time to retry */ +#define H_LongBusyOrder100msec 9902 /* Long busy, hint that 100msec is a good time to retry */ +#define H_LongBusyOrder1sec 9903 /* Long busy, hint that 1sec is a good time to retry */ +#define H_LongBusyOrder10sec 9904 /* Long busy, hint that 10sec is a good time to retry */ +#define H_LongBusyOrder100sec 9905 /* Long busy, hint that 100sec is a good time to retry */ +#define H_LongBusyEndRange 9905 /* End of long busy range */ +#define H_Hardware -1 /* Hardware error */ +#define H_Function -2 /* Function not supported */ +#define H_Privilege -3 /* Caller not privileged */ +#define H_Parameter -4 /* Parameter invalid, out-of-range or conflicting */ +#define H_Bad_Mode -5 /* Illegal msr value */ +#define H_PTEG_Full -6 /* PTEG is full */ +#define H_Not_Found -7 /* PTE was not found" */ +#define H_Reserved_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ +#define H_NoMem -9 +#define H_Authority -10 +#define H_Permission -11 +#define H_Dropped -12 +#define H_SourceParm -13 +#define H_DestParm -14 +#define H_RemoteParm -15 +#define H_Resource -16 + +/* Long Busy is a condition that can be returned by the firmware + * when a call cannot be completed now, but the identical call + * should be retried later. This prevents calls blocking in the + * firmware for long periods of time. Annoyingly the firmware can return + * a range of return codes, hinting at how long we should wait before + * retrying. If you don't care for the hint, the macro below is a good + * way to check for the long_busy return codes + */ +#define H_isLongBusy(x) ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange)) + +/* Flags */ +#define H_LARGE_PAGE (1UL<<(63-16)) +#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */ +#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */ +#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */ +#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */ +#define H_ANDCOND (1UL<<(63-33)) +#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */ +#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */ +#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */ +#define H_COPY_PAGE (1UL<<(63-49)) +#define H_N (1UL<<(63-61)) +#define H_PP1 (1UL<<(63-62)) +#define H_PP2 (1UL<<(63-63)) + +/* DABRX flags */ +#define H_DABRX_HYPERVISOR (1UL<<(63-61)) +#define H_DABRX_KERNEL (1UL<<(63-62)) +#define H_DABRX_USER (1UL<<(63-63)) + +/* pSeries hypervisor opcodes */ +#define H_REMOVE 0x04 +#define H_ENTER 0x08 +#define H_READ 0x0c +#define H_CLEAR_MOD 0x10 +#define H_CLEAR_REF 0x14 +#define H_PROTECT 0x18 +#define H_GET_TCE 0x1c +#define H_PUT_TCE 0x20 +#define H_SET_SPRG0 0x24 +#define H_SET_DABR 0x28 +#define H_PAGE_INIT 0x2c +#define H_SET_ASR 0x30 +#define H_ASR_ON 0x34 +#define H_ASR_OFF 0x38 +#define H_LOGICAL_CI_LOAD 0x3c +#define H_LOGICAL_CI_STORE 0x40 +#define H_LOGICAL_CACHE_LOAD 0x44 +#define H_LOGICAL_CACHE_STORE 0x48 +#define H_LOGICAL_ICBI 0x4c +#define H_LOGICAL_DCBF 0x50 +#define H_GET_TERM_CHAR 0x54 +#define H_PUT_TERM_CHAR 0x58 +#define H_REAL_TO_LOGICAL 0x5c +#define H_HYPERVISOR_DATA 0x60 +#define H_EOI 0x64 +#define H_CPPR 0x68 +#define H_IPI 0x6c +#define H_IPOLL 0x70 +#define H_XIRR 0x74 +#define H_PERFMON 0x7c +#define H_MIGRATE_DMA 0x78 +#define H_REGISTER_VPA 0xDC +#define H_CEDE 0xE0 +#define H_CONFER 0xE4 +#define H_PROD 0xE8 +#define H_GET_PPP 0xEC +#define H_SET_PPP 0xF0 +#define H_PURR 0xF4 +#define H_PIC 0xF8 +#define H_REG_CRQ 0xFC +#define H_FREE_CRQ 0x100 +#define H_VIO_SIGNAL 0x104 +#define H_SEND_CRQ 0x108 +#define H_COPY_RDMA 0x110 +#define H_SET_XDABR 0x134 +#define H_STUFF_TCE 0x138 +#define H_PUT_TCE_INDIRECT 0x13C +#define H_VTERM_PARTNER_INFO 0x150 +#define H_REGISTER_VTERM 0x154 +#define H_FREE_VTERM 0x158 +#define H_POLL_PENDING 0x1D8 + +#ifndef __ASSEMBLY__ + +/* plpar_hcall() -- Generic call interface using above opcodes + * + * The actual call interface is a hypervisor call instruction with + * the opcode in R3 and input args in R4-R7. + * Status is returned in R3 with variable output values in R4-R11. + * Only H_PTE_READ with H_READ_4 uses R6-R11 so we ignore it for now + * and return only two out args which MUST ALWAYS BE PROVIDED. + */ +long plpar_hcall(unsigned long opcode, + unsigned long arg1, + unsigned long arg2, + unsigned long arg3, + unsigned long arg4, + unsigned long *out1, + unsigned long *out2, + unsigned long *out3); + +/* Same as plpar_hcall but for those opcodes that return no values + * other than status. Slightly more efficient. + */ +long plpar_hcall_norets(unsigned long opcode, ...); + +/* + * Special hcall interface for ibmveth support. + * Takes 8 input parms. Returns a rc and stores the + * R4 return value in *out1. + */ +long plpar_hcall_8arg_2ret(unsigned long opcode, + unsigned long arg1, + unsigned long arg2, + unsigned long arg3, + unsigned long arg4, + unsigned long arg5, + unsigned long arg6, + unsigned long arg7, + unsigned long arg8, + unsigned long *out1); + +/* plpar_hcall_4out() + * + * same as plpar_hcall except with 4 output arguments. + * + */ +long plpar_hcall_4out(unsigned long opcode, + unsigned long arg1, + unsigned long arg2, + unsigned long arg3, + unsigned long arg4, + unsigned long *out1, + unsigned long *out2, + unsigned long *out3, + unsigned long *out4); + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_POWERPC_HVCALL_H */ diff --git a/include/asm-ppc64/hvcall.h b/include/asm-ppc64/hvcall.h deleted file mode 100644 index ab7c3cf24888..000000000000 --- a/include/asm-ppc64/hvcall.h +++ /dev/null @@ -1,173 +0,0 @@ -#ifndef _PPC64_HVCALL_H -#define _PPC64_HVCALL_H - -#define HVSC .long 0x44000022 - -#define H_Success 0 -#define H_Busy 1 /* Hardware busy -- retry later */ -#define H_Constrained 4 /* Resource request constrained to max allowed */ -#define H_LongBusyStartRange 9900 /* Start of long busy range */ -#define H_LongBusyOrder1msec 9900 /* Long busy, hint that 1msec is a good time to retry */ -#define H_LongBusyOrder10msec 9901 /* Long busy, hint that 10msec is a good time to retry */ -#define H_LongBusyOrder100msec 9902 /* Long busy, hint that 100msec is a good time to retry */ -#define H_LongBusyOrder1sec 9903 /* Long busy, hint that 1sec is a good time to retry */ -#define H_LongBusyOrder10sec 9904 /* Long busy, hint that 10sec is a good time to retry */ -#define H_LongBusyOrder100sec 9905 /* Long busy, hint that 100sec is a good time to retry */ -#define H_LongBusyEndRange 9905 /* End of long busy range */ -#define H_Hardware -1 /* Hardware error */ -#define H_Function -2 /* Function not supported */ -#define H_Privilege -3 /* Caller not privileged */ -#define H_Parameter -4 /* Parameter invalid, out-of-range or conflicting */ -#define H_Bad_Mode -5 /* Illegal msr value */ -#define H_PTEG_Full -6 /* PTEG is full */ -#define H_Not_Found -7 /* PTE was not found" */ -#define H_Reserved_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ -#define H_NoMem -9 -#define H_Authority -10 -#define H_Permission -11 -#define H_Dropped -12 -#define H_SourceParm -13 -#define H_DestParm -14 -#define H_RemoteParm -15 -#define H_Resource -16 - -/* Long Busy is a condition that can be returned by the firmware - * when a call cannot be completed now, but the identical call - * should be retried later. This prevents calls blocking in the - * firmware for long periods of time. Annoyingly the firmware can return - * a range of return codes, hinting at how long we should wait before - * retrying. If you don't care for the hint, the macro below is a good - * way to check for the long_busy return codes - */ -#define H_isLongBusy(x) ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange)) - -/* Flags */ -#define H_LARGE_PAGE (1UL<<(63-16)) -#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */ -#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */ -#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */ -#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */ -#define H_ANDCOND (1UL<<(63-33)) -#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */ -#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */ -#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */ -#define H_COPY_PAGE (1UL<<(63-49)) -#define H_N (1UL<<(63-61)) -#define H_PP1 (1UL<<(63-62)) -#define H_PP2 (1UL<<(63-63)) - -/* DABRX flags */ -#define H_DABRX_HYPERVISOR (1UL<<(63-61)) -#define H_DABRX_KERNEL (1UL<<(63-62)) -#define H_DABRX_USER (1UL<<(63-63)) - -/* pSeries hypervisor opcodes */ -#define H_REMOVE 0x04 -#define H_ENTER 0x08 -#define H_READ 0x0c -#define H_CLEAR_MOD 0x10 -#define H_CLEAR_REF 0x14 -#define H_PROTECT 0x18 -#define H_GET_TCE 0x1c -#define H_PUT_TCE 0x20 -#define H_SET_SPRG0 0x24 -#define H_SET_DABR 0x28 -#define H_PAGE_INIT 0x2c -#define H_SET_ASR 0x30 -#define H_ASR_ON 0x34 -#define H_ASR_OFF 0x38 -#define H_LOGICAL_CI_LOAD 0x3c -#define H_LOGICAL_CI_STORE 0x40 -#define H_LOGICAL_CACHE_LOAD 0x44 -#define H_LOGICAL_CACHE_STORE 0x48 -#define H_LOGICAL_ICBI 0x4c -#define H_LOGICAL_DCBF 0x50 -#define H_GET_TERM_CHAR 0x54 -#define H_PUT_TERM_CHAR 0x58 -#define H_REAL_TO_LOGICAL 0x5c -#define H_HYPERVISOR_DATA 0x60 -#define H_EOI 0x64 -#define H_CPPR 0x68 -#define H_IPI 0x6c -#define H_IPOLL 0x70 -#define H_XIRR 0x74 -#define H_PERFMON 0x7c -#define H_MIGRATE_DMA 0x78 -#define H_REGISTER_VPA 0xDC -#define H_CEDE 0xE0 -#define H_CONFER 0xE4 -#define H_PROD 0xE8 -#define H_GET_PPP 0xEC -#define H_SET_PPP 0xF0 -#define H_PURR 0xF4 -#define H_PIC 0xF8 -#define H_REG_CRQ 0xFC -#define H_FREE_CRQ 0x100 -#define H_VIO_SIGNAL 0x104 -#define H_SEND_CRQ 0x108 -#define H_COPY_RDMA 0x110 -#define H_SET_XDABR 0x134 -#define H_STUFF_TCE 0x138 -#define H_PUT_TCE_INDIRECT 0x13C -#define H_VTERM_PARTNER_INFO 0x150 -#define H_REGISTER_VTERM 0x154 -#define H_FREE_VTERM 0x158 -#define H_POLL_PENDING 0x1D8 - -#ifndef __ASSEMBLY__ - -/* plpar_hcall() -- Generic call interface using above opcodes - * - * The actual call interface is a hypervisor call instruction with - * the opcode in R3 and input args in R4-R7. - * Status is returned in R3 with variable output values in R4-R11. - * Only H_PTE_READ with H_READ_4 uses R6-R11 so we ignore it for now - * and return only two out args which MUST ALWAYS BE PROVIDED. - */ -long plpar_hcall(unsigned long opcode, - unsigned long arg1, - unsigned long arg2, - unsigned long arg3, - unsigned long arg4, - unsigned long *out1, - unsigned long *out2, - unsigned long *out3); - -/* Same as plpar_hcall but for those opcodes that return no values - * other than status. Slightly more efficient. - */ -long plpar_hcall_norets(unsigned long opcode, ...); - -/* - * Special hcall interface for ibmveth support. - * Takes 8 input parms. Returns a rc and stores the - * R4 return value in *out1. - */ -long plpar_hcall_8arg_2ret(unsigned long opcode, - unsigned long arg1, - unsigned long arg2, - unsigned long arg3, - unsigned long arg4, - unsigned long arg5, - unsigned long arg6, - unsigned long arg7, - unsigned long arg8, - unsigned long *out1); - -/* plpar_hcall_4out() - * - * same as plpar_hcall except with 4 output arguments. - * - */ -long plpar_hcall_4out(unsigned long opcode, - unsigned long arg1, - unsigned long arg2, - unsigned long arg3, - unsigned long arg4, - unsigned long *out1, - unsigned long *out2, - unsigned long *out3, - unsigned long *out4); - -#endif /* __ASSEMBLY__ */ -#endif /* _PPC64_HVCALL_H */ -- cgit v1.2.3 From 06a98dba0d4b4f2f9b1f35f636beb166d6cbde34 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 10 Nov 2005 15:51:14 +1100 Subject: powerpc: implement atomic64_t on ppc64 Signed-off-by: Stephen Rothwell --- include/asm-powerpc/atomic.h | 178 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 178 insertions(+) (limited to 'include') diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h index c5b12fd2b46b..9c0b372a46e1 100644 --- a/include/asm-powerpc/atomic.h +++ b/include/asm-powerpc/atomic.h @@ -197,5 +197,183 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v) #define smp_mb__before_atomic_inc() smp_mb() #define smp_mb__after_atomic_inc() smp_mb() +#ifdef __powerpc64__ + +typedef struct { volatile long counter; } atomic64_t; + +#define ATOMIC64_INIT(i) { (i) } + +#define atomic64_read(v) ((v)->counter) +#define atomic64_set(v,i) (((v)->counter) = (i)) + +static __inline__ void atomic64_add(long a, atomic64_t *v) +{ + long t; + + __asm__ __volatile__( +"1: ldarx %0,0,%3 # atomic64_add\n\ + add %0,%2,%0\n\ + stdcx. %0,0,%3 \n\ + bne- 1b" + : "=&r" (t), "=m" (v->counter) + : "r" (a), "r" (&v->counter), "m" (v->counter) + : "cc"); +} + +static __inline__ long atomic64_add_return(long a, atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + EIEIO_ON_SMP +"1: ldarx %0,0,%2 # atomic64_add_return\n\ + add %0,%1,%0\n\ + stdcx. %0,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (a), "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0) + +static __inline__ void atomic64_sub(long a, atomic64_t *v) +{ + long t; + + __asm__ __volatile__( +"1: ldarx %0,0,%3 # atomic64_sub\n\ + subf %0,%2,%0\n\ + stdcx. %0,0,%3 \n\ + bne- 1b" + : "=&r" (t), "=m" (v->counter) + : "r" (a), "r" (&v->counter), "m" (v->counter) + : "cc"); +} + +static __inline__ long atomic64_sub_return(long a, atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + EIEIO_ON_SMP +"1: ldarx %0,0,%2 # atomic64_sub_return\n\ + subf %0,%1,%0\n\ + stdcx. %0,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (a), "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +static __inline__ void atomic64_inc(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( +"1: ldarx %0,0,%2 # atomic64_inc\n\ + addic %0,%0,1\n\ + stdcx. %0,0,%2 \n\ + bne- 1b" + : "=&r" (t), "=m" (v->counter) + : "r" (&v->counter), "m" (v->counter) + : "cc"); +} + +static __inline__ long atomic64_inc_return(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + EIEIO_ON_SMP +"1: ldarx %0,0,%1 # atomic64_inc_return\n\ + addic %0,%0,1\n\ + stdcx. %0,0,%1 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +/* + * atomic64_inc_and_test - increment and test + * @v: pointer of type atomic64_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) + +static __inline__ void atomic64_dec(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( +"1: ldarx %0,0,%2 # atomic64_dec\n\ + addic %0,%0,-1\n\ + stdcx. %0,0,%2\n\ + bne- 1b" + : "=&r" (t), "=m" (v->counter) + : "r" (&v->counter), "m" (v->counter) + : "cc"); +} + +static __inline__ long atomic64_dec_return(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + EIEIO_ON_SMP +"1: ldarx %0,0,%1 # atomic64_dec_return\n\ + addic %0,%0,-1\n\ + stdcx. %0,0,%1\n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define atomic64_sub_and_test(a, v) (atomic64_sub_return((a), (v)) == 0) +#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) + +/* + * Atomically test *v and decrement if it is greater than 0. + * The function returns the old value of *v minus 1. + */ +static __inline__ long atomic64_dec_if_positive(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + EIEIO_ON_SMP +"1: ldarx %0,0,%1 # atomic64_dec_if_positive\n\ + addic. %0,%0,-1\n\ + blt- 2f\n\ + stdcx. %0,0,%1\n\ + bne- 1b" + ISYNC_ON_SMP + "\n\ +2:" : "=&r" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#endif /* __powerpc64__ */ + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_ATOMIC_H_ */ -- cgit v1.2.3 From 49b09853df1a303876b82a6480efb2f7b45ef041 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 10 Nov 2005 15:53:40 +1100 Subject: powerpc: Move some extern declarations from C code into headers This also make klimit have the same type on 32-bit as on 64-bit, namely unsigned long, and defines and initializes it in one place. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom.c | 4 ---- arch/powerpc/kernel/setup-common.c | 2 ++ arch/powerpc/kernel/setup_32.c | 3 +-- arch/powerpc/kernel/setup_64.c | 8 -------- arch/powerpc/mm/init_32.c | 3 --- arch/powerpc/mm/init_64.c | 2 -- arch/powerpc/platforms/iseries/setup.c | 3 +-- include/asm-powerpc/system.h | 1 + include/asm-ppc64/mmu.h | 1 + 9 files changed, 6 insertions(+), 21 deletions(-) (limited to 'include') diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 1bf3642cb859..6391a4a0709a 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -71,10 +71,6 @@ struct isa_reg_property { typedef int interpret_func(struct device_node *, unsigned long *, int, int, int); -extern struct rtas_t rtas; -extern struct lmb lmb; -extern unsigned long klimit; - static int __initdata dt_root_addr_cells; static int __initdata dt_root_size_cells; diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 06e4ef215627..bae4bff138f1 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -69,6 +69,8 @@ int _machine = 0; EXPORT_SYMBOL(_machine); #endif +unsigned long klimit = (unsigned long) _end; + /* * This still seems to be needed... -- paulus */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index f73d7681b2e9..c98cfcc9cd9a 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -279,7 +279,6 @@ arch_initcall(ppc_init); /* Warning, IO base is not yet inited */ void __init setup_arch(char **cmdline_p) { - extern char *klimit; extern void do_init_bootmem(void); /* so udelay does something sensible, assume <= 1000 bogomips */ @@ -338,7 +337,7 @@ void __init setup_arch(char **cmdline_p) init_mm.start_code = PAGE_OFFSET; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; - init_mm.brk = (unsigned long) klimit; + init_mm.brk = klimit; /* Save unparsed command line copy for /proc/cmdline */ strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index be607b877a55..6791668213e7 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -96,14 +96,6 @@ extern void udbg_init_maple_realmode(void); do { udbg_putc = call_rtas_display_status_delay; } while(0) #endif -/* extern void *stab; */ -extern unsigned long klimit; - -extern void mm_init_ppc64(void); -extern void early_init_devtree(void *flat_dt); -extern void unflatten_device_tree(void); -extern void check_for_initrd(void); - int have_of = 1; int boot_cpuid = 0; int boot_cpuid_phys = 0; diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 4612a79dfb6e..7d4b8b5f0606 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -84,9 +84,6 @@ void MMU_init(void); /* XXX should be in current.h -- paulus */ extern struct task_struct *current_set[NR_CPUS]; -char *klimit = _end; -struct device_node *memory_node; - extern int init_bootmem_done; /* diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index e274cf10205c..1134f70f231d 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -80,8 +80,6 @@ #warning TASK_SIZE is smaller than it needs to be. #endif -unsigned long klimit = (unsigned long)_end; - /* max amount of RAM to use */ unsigned long __max_memory; diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 623c39aa0436..1f338341d8f2 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -40,7 +40,7 @@ #include #include #include - +#include #include #include #include @@ -85,7 +85,6 @@ static void iSeries_pci_final_fixup(void) { } int piranha_simulator; extern int rd_size; /* Defined in drivers/block/rd.c */ -extern unsigned long klimit; extern unsigned long embedded_sysmap_start; extern unsigned long embedded_sysmap_end; diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index f0cce5a30235..5341b75c75cb 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -179,6 +179,7 @@ extern struct task_struct *_switch(struct thread_struct *prev, extern unsigned int rtas_data; extern int mem_init_done; /* set on boot once kmalloc can be called */ extern unsigned long memory_limit; +extern unsigned long klimit; extern int powersave_nap; /* set if nap mode can be used in idle loop */ diff --git a/include/asm-ppc64/mmu.h b/include/asm-ppc64/mmu.h index c43d512d5902..1a7e0afa2dc6 100644 --- a/include/asm-ppc64/mmu.h +++ b/include/asm-ppc64/mmu.h @@ -229,6 +229,7 @@ extern void htab_initialize_secondary(void); extern void hpte_init_native(void); extern void hpte_init_lpar(void); extern void hpte_init_iSeries(void); +extern void mm_init_ppc64(void); extern long pSeries_lpar_hpte_insert(unsigned long hpte_group, unsigned long va, unsigned long prpn, -- cgit v1.2.3 From d9564ad11454581f85b77026f290f4bb24eecf25 Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Thu, 3 Nov 2005 18:50:48 -0600 Subject: [PATCH] ppc64: mark failed devices 17-eeh-slot-marking-bug.patch A device that experiences a PCI outage may be just one deivce out of many that was affected. In order to avoid repeated reports of a failure, the entire tree of affected devices should be marked as failed. This patch marks up the entire tree. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh.c | 48 ++++++++++++++++++++++++------------ include/asm-powerpc/ppc-pci.h | 7 ++++++ 2 files changed, 39 insertions(+), 16 deletions(-) (limited to 'include') diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 3a857b22aa1e..79de2310e70b 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -478,32 +478,47 @@ static struct device_node * find_device_pe(struct device_node *dn) * an interrupt context, which is bad. */ -static void __eeh_mark_slot (struct device_node *dn) +static void __eeh_mark_slot (struct device_node *dn, int mode_flag) { while (dn) { - PCI_DN(dn)->eeh_mode |= EEH_MODE_ISOLATED; + if (PCI_DN(dn)) { + PCI_DN(dn)->eeh_mode |= mode_flag; - if (dn->child) - __eeh_mark_slot (dn->child); + if (dn->child) + __eeh_mark_slot (dn->child, mode_flag); + } dn = dn->sibling; } } -static void __eeh_clear_slot (struct device_node *dn) +void eeh_mark_slot (struct device_node *dn, int mode_flag) +{ + dn = find_device_pe (dn); + PCI_DN(dn)->eeh_mode |= mode_flag; + __eeh_mark_slot (dn->child, mode_flag); +} + +static void __eeh_clear_slot (struct device_node *dn, int mode_flag) { while (dn) { - PCI_DN(dn)->eeh_mode &= ~EEH_MODE_ISOLATED; - if (dn->child) - __eeh_clear_slot (dn->child); + if (PCI_DN(dn)) { + PCI_DN(dn)->eeh_mode &= ~mode_flag; + PCI_DN(dn)->eeh_check_count = 0; + if (dn->child) + __eeh_clear_slot (dn->child, mode_flag); + } dn = dn->sibling; } } -static inline void eeh_clear_slot (struct device_node *dn) +void eeh_clear_slot (struct device_node *dn, int mode_flag) { unsigned long flags; spin_lock_irqsave(&confirm_error_lock, flags); - __eeh_clear_slot (dn); + dn = find_device_pe (dn); + PCI_DN(dn)->eeh_mode &= ~mode_flag; + PCI_DN(dn)->eeh_check_count = 0; + __eeh_clear_slot (dn->child, mode_flag); spin_unlock_irqrestore(&confirm_error_lock, flags); } @@ -528,7 +543,6 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) int rets[3]; unsigned long flags; struct pci_dn *pdn; - struct device_node *pe_dn; int rc = 0; __get_cpu_var(total_mmio_ffs)++; @@ -630,8 +644,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) /* Avoid repeated reports of this failure, including problems * with other functions on this device, and functions under * bridges. */ - pe_dn = find_device_pe (dn); - __eeh_mark_slot (pe_dn); + eeh_mark_slot (dn, EEH_MODE_ISOLATED); spin_unlock_irqrestore(&confirm_error_lock, flags); eeh_send_failure_event (dn, dev, rets[0], rets[2]); @@ -743,9 +756,6 @@ rtas_pci_slot_reset(struct pci_dn *pdn, int state) rc, state, pdn->node->full_name); return; } - - if (state == 0) - eeh_clear_slot (pdn->node->parent->child); } /** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second @@ -764,6 +774,12 @@ rtas_set_slot_reset(struct pci_dn *pdn) #define PCI_BUS_RST_HOLD_TIME_MSEC 250 msleep (PCI_BUS_RST_HOLD_TIME_MSEC); + + /* We might get hit with another EEH freeze as soon as the + * pci slot reset line is dropped. Make sure we don't miss + * these, and clear the flag now. */ + eeh_clear_slot (pdn->node, EEH_MODE_ISOLATED); + rtas_pci_slot_reset (pdn, 0); /* After a PCI slot has been reset, the PCI Express spec requires diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index d86c47872bea..9896fade98a7 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -87,6 +87,13 @@ void rtas_configure_bridge(struct pci_dn *); int rtas_write_config(struct pci_dn *, int where, int size, u32 val); +/** + * mark and clear slots: find "partition endpoint" PE and set or + * clear the flags for each subnode of the PE. + */ +void eeh_mark_slot (struct device_node *dn, int mode_flag); +void eeh_clear_slot (struct device_node *dn, int mode_flag); + #endif #endif /* _ASM_POWERPC_PPC_PCI_H */ -- cgit v1.2.3 From 97671e4b295fba1b7d3de2984f98bcdaeb197a26 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 10 Nov 2005 16:06:30 +1100 Subject: ppc64: Add declarations to ppc64 headers as well as powerpc headers For now, we need these declarations that we moved from C code in the asm-ppc64 versions of these headers as well as the asm-powerpc versions. The asm-ppc64 versions will be disappearing shortly. Signed-off-by: Paul Mackerras --- include/asm-ppc64/prom.h | 2 ++ include/asm-ppc64/system.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'include') diff --git a/include/asm-ppc64/prom.h b/include/asm-ppc64/prom.h index 76bb0266d67c..ddfe186589fa 100644 --- a/include/asm-ppc64/prom.h +++ b/include/asm-ppc64/prom.h @@ -204,6 +204,8 @@ extern void of_detach_node(const struct device_node *); extern unsigned long prom_init(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long); extern void finish_device_tree(void); +extern void unflatten_device_tree(void); +extern void early_init_devtree(void *); extern int device_is_compatible(struct device_node *device, const char *); extern int machine_is_compatible(const char *compat); extern unsigned char *get_property(struct device_node *node, const char *name, diff --git a/include/asm-ppc64/system.h b/include/asm-ppc64/system.h index 0cdd66c9f4b7..bf9a6aba19c9 100644 --- a/include/asm-ppc64/system.h +++ b/include/asm-ppc64/system.h @@ -149,6 +149,8 @@ struct thread_struct; extern struct task_struct * _switch(struct thread_struct *prev, struct thread_struct *next); +extern unsigned long klimit; + extern int powersave_nap; /* set if nap mode can be used in idle loop */ /* -- cgit v1.2.3