From ab42ddb9eb71b580349b03e4fc5bfcf230422eb8 Mon Sep 17 00:00:00 2001 From: Eric Long Date: Thu, 19 Apr 2018 10:00:48 +0800 Subject: dmaengine: sprd: Move DMA request mode and interrupt type into head file This patch will move the Spreadtrum DMA request mode and interrupt type into one head file for user to configure. Signed-off-by: Eric Long Signed-off-by: Baolin Wang Signed-off-by: Vinod Koul --- include/linux/dma/sprd-dma.h | 57 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 include/linux/dma/sprd-dma.h (limited to 'include') diff --git a/include/linux/dma/sprd-dma.h b/include/linux/dma/sprd-dma.h new file mode 100644 index 000000000000..c545162e725b --- /dev/null +++ b/include/linux/dma/sprd-dma.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _SPRD_DMA_H_ +#define _SPRD_DMA_H_ + +/* + * enum sprd_dma_req_mode: define the DMA request mode + * @SPRD_DMA_FRAG_REQ: fragment request mode + * @SPRD_DMA_BLK_REQ: block request mode + * @SPRD_DMA_TRANS_REQ: transaction request mode + * @SPRD_DMA_LIST_REQ: link-list request mode + * + * We have 4 types request mode: fragment mode, block mode, transaction mode + * and linklist mode. One transaction can contain several blocks, one block can + * contain several fragments. Link-list mode means we can save several DMA + * configuration into one reserved memory, then DMA can fetch each DMA + * configuration automatically to start transfer. + */ +enum sprd_dma_req_mode { + SPRD_DMA_FRAG_REQ, + SPRD_DMA_BLK_REQ, + SPRD_DMA_TRANS_REQ, + SPRD_DMA_LIST_REQ, +}; + +/* + * enum sprd_dma_int_type: define the DMA interrupt type + * @SPRD_DMA_NO_INT: do not need generate DMA interrupts. + * @SPRD_DMA_FRAG_INT: fragment done interrupt when one fragment request + * is done. + * @SPRD_DMA_BLK_INT: block done interrupt when one block request is done. + * @SPRD_DMA_BLK_FRAG_INT: block and fragment interrupt when one fragment + * or one block request is done. + * @SPRD_DMA_TRANS_INT: tansaction done interrupt when one transaction + * request is done. + * @SPRD_DMA_TRANS_FRAG_INT: transaction and fragment interrupt when one + * transaction request or fragment request is done. + * @SPRD_DMA_TRANS_BLK_INT: transaction and block interrupt when one + * transaction request or block request is done. + * @SPRD_DMA_LIST_INT: link-list done interrupt when one link-list request + * is done. + * @SPRD_DMA_CFGERR_INT: configure error interrupt when configuration is + * incorrect. + */ +enum sprd_dma_int_type { + SPRD_DMA_NO_INT, + SPRD_DMA_FRAG_INT, + SPRD_DMA_BLK_INT, + SPRD_DMA_BLK_FRAG_INT, + SPRD_DMA_TRANS_INT, + SPRD_DMA_TRANS_FRAG_INT, + SPRD_DMA_TRANS_BLK_INT, + SPRD_DMA_LIST_INT, + SPRD_DMA_CFGERR_INT, +}; + +#endif -- cgit v1.2.3 From ca1b7d3daff43a269fb7a0479055ac5b741638d8 Mon Sep 17 00:00:00 2001 From: Eric Long Date: Wed, 23 May 2018 17:31:11 +0800 Subject: dmaengine: sprd: Add Spreadtrum DMA configuration This patch adds the 'device_config' and 'device_prep_slave_sg' interfaces for users to configure DMA, as well as adding one 'struct sprd_dma_config' structure to save Spreadtrum DMA configuration for each DMA channel. Signed-off-by: Eric Long Signed-off-by: Baolin Wang Signed-off-by: Vinod Koul --- drivers/dma/sprd-dma.c | 182 +++++++++++++++++++++++++++++++++++++++++++ include/linux/dma/sprd-dma.h | 4 + 2 files changed, 186 insertions(+) (limited to 'include') diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c index 1ca5acd2a4ac..ab69f835ea02 100644 --- a/drivers/dma/sprd-dma.c +++ b/drivers/dma/sprd-dma.c @@ -164,6 +164,7 @@ struct sprd_dma_desc { struct sprd_dma_chn { struct virt_dma_chan vc; void __iomem *chn_base; + struct dma_slave_config slave_cfg; u32 chn_num; u32 dev_id; struct sprd_dma_desc *cur_desc; @@ -552,6 +553,129 @@ static void sprd_dma_issue_pending(struct dma_chan *chan) spin_unlock_irqrestore(&schan->vc.lock, flags); } +static int sprd_dma_get_datawidth(enum dma_slave_buswidth buswidth) +{ + switch (buswidth) { + case DMA_SLAVE_BUSWIDTH_1_BYTE: + case DMA_SLAVE_BUSWIDTH_2_BYTES: + case DMA_SLAVE_BUSWIDTH_4_BYTES: + case DMA_SLAVE_BUSWIDTH_8_BYTES: + return ffs(buswidth) - 1; + + default: + return -EINVAL; + } +} + +static int sprd_dma_get_step(enum dma_slave_buswidth buswidth) +{ + switch (buswidth) { + case DMA_SLAVE_BUSWIDTH_1_BYTE: + case DMA_SLAVE_BUSWIDTH_2_BYTES: + case DMA_SLAVE_BUSWIDTH_4_BYTES: + case DMA_SLAVE_BUSWIDTH_8_BYTES: + return buswidth; + + default: + return -EINVAL; + } +} + +static int sprd_dma_fill_desc(struct dma_chan *chan, + struct sprd_dma_desc *sdesc, + dma_addr_t src, dma_addr_t dst, u32 len, + enum dma_transfer_direction dir, + unsigned long flags, + struct dma_slave_config *slave_cfg) +{ + struct sprd_dma_dev *sdev = to_sprd_dma_dev(chan); + struct sprd_dma_chn *schan = to_sprd_dma_chan(chan); + struct sprd_dma_chn_hw *hw = &sdesc->chn_hw; + u32 req_mode = (flags >> SPRD_DMA_REQ_SHIFT) & SPRD_DMA_REQ_MODE_MASK; + u32 int_mode = flags & SPRD_DMA_INT_MASK; + int src_datawidth, dst_datawidth, src_step, dst_step; + u32 temp, fix_mode = 0, fix_en = 0; + + if (dir == DMA_MEM_TO_DEV) { + src_step = sprd_dma_get_step(slave_cfg->src_addr_width); + if (src_step < 0) { + dev_err(sdev->dma_dev.dev, "invalid source step\n"); + return src_step; + } + dst_step = SPRD_DMA_NONE_STEP; + } else { + dst_step = sprd_dma_get_step(slave_cfg->dst_addr_width); + if (dst_step < 0) { + dev_err(sdev->dma_dev.dev, "invalid destination step\n"); + return dst_step; + } + src_step = SPRD_DMA_NONE_STEP; + } + + src_datawidth = sprd_dma_get_datawidth(slave_cfg->src_addr_width); + if (src_datawidth < 0) { + dev_err(sdev->dma_dev.dev, "invalid source datawidth\n"); + return src_datawidth; + } + + dst_datawidth = sprd_dma_get_datawidth(slave_cfg->dst_addr_width); + if (dst_datawidth < 0) { + dev_err(sdev->dma_dev.dev, "invalid destination datawidth\n"); + return dst_datawidth; + } + + if (slave_cfg->slave_id) + schan->dev_id = slave_cfg->slave_id; + + hw->cfg = SPRD_DMA_DONOT_WAIT_BDONE << SPRD_DMA_WAIT_BDONE_OFFSET; + + /* + * wrap_ptr and wrap_to will save the high 4 bits source address and + * destination address. + */ + hw->wrap_ptr = (src >> SPRD_DMA_HIGH_ADDR_OFFSET) & SPRD_DMA_HIGH_ADDR_MASK; + hw->wrap_to = (dst >> SPRD_DMA_HIGH_ADDR_OFFSET) & SPRD_DMA_HIGH_ADDR_MASK; + hw->src_addr = src & SPRD_DMA_LOW_ADDR_MASK; + hw->des_addr = dst & SPRD_DMA_LOW_ADDR_MASK; + + /* + * If the src step and dst step both are 0 or both are not 0, that means + * we can not enable the fix mode. If one is 0 and another one is not, + * we can enable the fix mode. + */ + if ((src_step != 0 && dst_step != 0) || (src_step | dst_step) == 0) { + fix_en = 0; + } else { + fix_en = 1; + if (src_step) + fix_mode = 1; + else + fix_mode = 0; + } + + hw->intc = int_mode | SPRD_DMA_CFG_ERR_INT_EN; + + temp = src_datawidth << SPRD_DMA_SRC_DATAWIDTH_OFFSET; + temp |= dst_datawidth << SPRD_DMA_DES_DATAWIDTH_OFFSET; + temp |= req_mode << SPRD_DMA_REQ_MODE_OFFSET; + temp |= fix_mode << SPRD_DMA_FIX_SEL_OFFSET; + temp |= fix_en << SPRD_DMA_FIX_EN_OFFSET; + temp |= slave_cfg->src_maxburst & SPRD_DMA_FRG_LEN_MASK; + hw->frg_len = temp; + + hw->blk_len = len & SPRD_DMA_BLK_LEN_MASK; + hw->trsc_len = len & SPRD_DMA_TRSC_LEN_MASK; + + temp = (dst_step & SPRD_DMA_TRSF_STEP_MASK) << SPRD_DMA_DEST_TRSF_STEP_OFFSET; + temp |= (src_step & SPRD_DMA_TRSF_STEP_MASK) << SPRD_DMA_SRC_TRSF_STEP_OFFSET; + hw->trsf_step = temp; + + hw->frg_step = 0; + hw->src_blk_step = 0; + hw->des_blk_step = 0; + return 0; +} + static struct dma_async_tx_descriptor * sprd_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, size_t len, unsigned long flags) @@ -607,6 +731,62 @@ sprd_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, return vchan_tx_prep(&schan->vc, &sdesc->vd, flags); } +static struct dma_async_tx_descriptor * +sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sglen, enum dma_transfer_direction dir, + unsigned long flags, void *context) +{ + struct sprd_dma_chn *schan = to_sprd_dma_chan(chan); + struct dma_slave_config *slave_cfg = &schan->slave_cfg; + dma_addr_t src = 0, dst = 0; + struct sprd_dma_desc *sdesc; + struct scatterlist *sg; + u32 len = 0; + int ret, i; + + /* TODO: now we only support one sg for each DMA configuration. */ + if (!is_slave_direction(dir) || sglen > 1) + return NULL; + + sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT); + if (!sdesc) + return NULL; + + for_each_sg(sgl, sg, sglen, i) { + len = sg_dma_len(sg); + + if (dir == DMA_MEM_TO_DEV) { + src = sg_dma_address(sg); + dst = slave_cfg->dst_addr; + } else { + src = slave_cfg->src_addr; + dst = sg_dma_address(sg); + } + } + + ret = sprd_dma_fill_desc(chan, sdesc, src, dst, len, dir, flags, + slave_cfg); + if (ret) { + kfree(sdesc); + return NULL; + } + + return vchan_tx_prep(&schan->vc, &sdesc->vd, flags); +} + +static int sprd_dma_slave_config(struct dma_chan *chan, + struct dma_slave_config *config) +{ + struct sprd_dma_chn *schan = to_sprd_dma_chan(chan); + struct dma_slave_config *slave_cfg = &schan->slave_cfg; + + if (!is_slave_direction(config->direction)) + return -EINVAL; + + memcpy(slave_cfg, config, sizeof(*config)); + return 0; +} + static int sprd_dma_pause(struct dma_chan *chan) { struct sprd_dma_chn *schan = to_sprd_dma_chan(chan); @@ -733,6 +913,8 @@ static int sprd_dma_probe(struct platform_device *pdev) sdev->dma_dev.device_tx_status = sprd_dma_tx_status; sdev->dma_dev.device_issue_pending = sprd_dma_issue_pending; sdev->dma_dev.device_prep_dma_memcpy = sprd_dma_prep_dma_memcpy; + sdev->dma_dev.device_prep_slave_sg = sprd_dma_prep_slave_sg; + sdev->dma_dev.device_config = sprd_dma_slave_config; sdev->dma_dev.device_pause = sprd_dma_pause; sdev->dma_dev.device_resume = sprd_dma_resume; sdev->dma_dev.device_terminate_all = sprd_dma_terminate_all; diff --git a/include/linux/dma/sprd-dma.h b/include/linux/dma/sprd-dma.h index c545162e725b..b0115e340fbc 100644 --- a/include/linux/dma/sprd-dma.h +++ b/include/linux/dma/sprd-dma.h @@ -3,6 +3,10 @@ #ifndef _SPRD_DMA_H_ #define _SPRD_DMA_H_ +#define SPRD_DMA_REQ_SHIFT 16 +#define SPRD_DMA_FLAGS(req_mode, int_type) \ + ((req_mode) << SPRD_DMA_REQ_SHIFT | (int_type)) + /* * enum sprd_dma_req_mode: define the DMA request mode * @SPRD_DMA_FRAG_REQ: fragment request mode -- cgit v1.2.3