From 603aa14d3daaa7073bab4c472025c4963030e0cc Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 21 Jun 2017 16:00:27 +0200 Subject: mmc: tmio, renesas-sdhi: add max_{segs, blk_count} to tmio_mmc_data Allow TMIO and SDHI driver implementations to provide values for max_segs and max_blk_count. A follow-up patch will set these values for Renesas Gen3 SoCs the using an SDHI driver. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Ai Kyuse Signed-off-by: Simon Horman Reviewed-by: Wolfram Sang Signed-off-by: Ulf Hansson --- include/linux/mfd/tmio.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 26e8f8c0a6db..18b17a39d465 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -128,6 +128,8 @@ struct tmio_mmc_data { unsigned int cd_gpio; int alignment_shift; dma_addr_t dma_rx_offset; + unsigned int max_blk_count; + unsigned short max_segs; void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); }; -- cgit v1.2.3 From 1896f14006b28a7ed6881666d18a244827af0a5b Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Wed, 19 Jul 2017 15:50:56 +0800 Subject: mmc: core: remove check of host->removed for rescan routine The intention of this check was to prevent the conflict between hotplug and removing driver for whatever reason. Currently it doesn't improve anything and the following rescan process could still saftly perform the scan flow. So these code seems pointless now and let's remove them. Signed-off-by: Shawn Lin Signed-off-by: Ulf Hansson --- drivers/mmc/core/core.c | 13 ------------- include/linux/mmc/host.h | 3 --- 2 files changed, 16 deletions(-) (limited to 'include') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 26431267a3e2..b311ec974c6a 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1769,13 +1769,6 @@ void mmc_detach_bus(struct mmc_host *host) static void _mmc_detect_change(struct mmc_host *host, unsigned long delay, bool cd_irq) { -#ifdef CONFIG_MMC_DEBUG - unsigned long flags; - spin_lock_irqsave(&host->lock, flags); - WARN_ON(host->removed); - spin_unlock_irqrestore(&host->lock, flags); -#endif - /* * If the device is configured as wakeup, we prevent a new sleep for * 5 s to give provision for user space to consume the event. @@ -2646,12 +2639,6 @@ void mmc_start_host(struct mmc_host *host) void mmc_stop_host(struct mmc_host *host) { -#ifdef CONFIG_MMC_DEBUG - unsigned long flags; - spin_lock_irqsave(&host->lock, flags); - host->removed = 1; - spin_unlock_irqrestore(&host->lock, flags); -#endif if (host->slot.cd_irq >= 0) { if (host->slot.cd_wake_enabled) disable_irq_wake(host->slot.cd_irq); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index ebd1cebbef0c..4617c21f97f7 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -328,9 +328,6 @@ struct mmc_host { unsigned int use_spi_crc:1; unsigned int claimed:1; /* host exclusively claimed */ unsigned int bus_dead:1; /* bus has been released */ -#ifdef CONFIG_MMC_DEBUG - unsigned int removed:1; /* host is being removed */ -#endif unsigned int can_retune:1; /* re-tuning can be used */ unsigned int doing_retune:1; /* re-tuning in progress */ unsigned int retune_now:1; /* do re-tuning at next req */ -- cgit v1.2.3 From 4406ae215b5a1dd59d941c1323b9f40d241357ac Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Wed, 2 Aug 2017 11:12:42 +0800 Subject: mmc: core: correct taac parameter according to the specification Per the spec of JESD84-B51, section 7.3, replace tacc with taac to fix the obvious typo. Signed-off-by: Shawn Lin Signed-off-by: Ulf Hansson --- drivers/mmc/core/core.c | 14 +++++++------- drivers/mmc/core/mmc.c | 8 ++++---- drivers/mmc/core/sd.c | 12 ++++++------ include/linux/mmc/card.h | 4 ++-- 4 files changed, 19 insertions(+), 19 deletions(-) (limited to 'include') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 15623ccdcd8a..6177eb09bf1b 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -733,8 +733,8 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) if (data->flags & MMC_DATA_WRITE) mult <<= card->csd.r2w_factor; - data->timeout_ns = card->csd.tacc_ns * mult; - data->timeout_clks = card->csd.tacc_clks * mult; + data->timeout_ns = card->csd.taac_ns * mult; + data->timeout_clks = card->csd.taac_clks * mult; /* * SD cards also have an upper limit on the timeout. @@ -1859,14 +1859,14 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card, } else { /* CSD Erase Group Size uses write timeout */ unsigned int mult = (10 << card->csd.r2w_factor); - unsigned int timeout_clks = card->csd.tacc_clks * mult; + unsigned int timeout_clks = card->csd.taac_clks * mult; unsigned int timeout_us; - /* Avoid overflow: e.g. tacc_ns=80000000 mult=1280 */ - if (card->csd.tacc_ns < 1000000) - timeout_us = (card->csd.tacc_ns * mult) / 1000; + /* Avoid overflow: e.g. taac_ns=80000000 mult=1280 */ + if (card->csd.taac_ns < 1000000) + timeout_us = (card->csd.taac_ns * mult) / 1000; else - timeout_us = (card->csd.tacc_ns / 1000) * mult; + timeout_us = (card->csd.taac_ns / 1000) * mult; /* * ios.clock is only a target. The real clock rate might be diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 2bae69e39544..a65f56bea4f3 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -41,11 +41,11 @@ static const unsigned char tran_mant[] = { 35, 40, 45, 50, 55, 60, 70, 80, }; -static const unsigned int tacc_exp[] = { +static const unsigned int taac_exp[] = { 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000, }; -static const unsigned int tacc_mant[] = { +static const unsigned int taac_mant[] = { 0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80, }; @@ -153,8 +153,8 @@ static int mmc_decode_csd(struct mmc_card *card) csd->mmca_vsn = UNSTUFF_BITS(resp, 122, 4); m = UNSTUFF_BITS(resp, 115, 4); e = UNSTUFF_BITS(resp, 112, 3); - csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10; - csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100; + csd->taac_ns = (taac_exp[e] * taac_mant[m] + 9) / 10; + csd->taac_clks = UNSTUFF_BITS(resp, 104, 8) * 100; m = UNSTUFF_BITS(resp, 99, 4); e = UNSTUFF_BITS(resp, 96, 3); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index a1b0aa14d5e3..4fd1620b732d 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -39,11 +39,11 @@ static const unsigned char tran_mant[] = { 35, 40, 45, 50, 55, 60, 70, 80, }; -static const unsigned int tacc_exp[] = { +static const unsigned int taac_exp[] = { 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000, }; -static const unsigned int tacc_mant[] = { +static const unsigned int taac_mant[] = { 0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80, }; @@ -111,8 +111,8 @@ static int mmc_decode_csd(struct mmc_card *card) case 0: m = UNSTUFF_BITS(resp, 115, 4); e = UNSTUFF_BITS(resp, 112, 3); - csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10; - csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100; + csd->taac_ns = (taac_exp[e] * taac_mant[m] + 9) / 10; + csd->taac_clks = UNSTUFF_BITS(resp, 104, 8) * 100; m = UNSTUFF_BITS(resp, 99, 4); e = UNSTUFF_BITS(resp, 96, 3); @@ -148,8 +148,8 @@ static int mmc_decode_csd(struct mmc_card *card) */ mmc_card_set_blockaddr(card); - csd->tacc_ns = 0; /* Unused */ - csd->tacc_clks = 0; /* Unused */ + csd->taac_ns = 0; /* Unused */ + csd->taac_clks = 0; /* Unused */ m = UNSTUFF_BITS(resp, 99, 4); e = UNSTUFF_BITS(resp, 96, 3); diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 46c73e97e61f..279b39008a33 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -29,8 +29,8 @@ struct mmc_csd { unsigned char structure; unsigned char mmca_vsn; unsigned short cmdclass; - unsigned short tacc_clks; - unsigned int tacc_ns; + unsigned short taac_clks; + unsigned int taac_ns; unsigned int c_size; unsigned int r2w_factor; unsigned int max_dtr; -- cgit v1.2.3 From f6f64ed868d32a121f1535da9f42791c91562e4a Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 24 Jul 2017 21:58:56 +0800 Subject: clk: sunxi-ng: Add interface to query or configure MMC timing modes. Starting with the A83T SoC, Allwinner introduced a new timing mode for its MMC clocks. The new mode changes how the MMC controller sample and output clocks are delayed to match chip and board specifics. There are two controls for this, one on the CCU side controlling how the clocks behave, and one in the MMC controller controlling what inputs to take and how to route them. In the old mode, the MMC clock had 2 child clocks providing the output and sample clocks, which could be delayed by a number of clock cycles measured from the MMC clock's parent. With the new mode, the 2 delay clocks are no longer active. Instead, the delays and associated controls are moved into the MMC controller. The output of the MMC clock is also halved. The difference in how things are wired between the modes means that the clock controls and the MMC controls must match. To achieve this in a clear, explicit way, we introduce two functions for the MMC driver to use: one queries the hardware for the current mode set, and the other allows the MMC driver to request a mode. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Ulf Hansson --- drivers/clk/sunxi-ng/Makefile | 1 + drivers/clk/sunxi-ng/ccu_common.h | 4 ++ drivers/clk/sunxi-ng/ccu_mmc_timing.c | 70 +++++++++++++++++++++++++++++++++++ include/linux/clk/sunxi-ng.h | 35 ++++++++++++++++++ 4 files changed, 110 insertions(+) create mode 100644 drivers/clk/sunxi-ng/ccu_mmc_timing.c create mode 100644 include/linux/clk/sunxi-ng.h (limited to 'include') diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile index 0c45fa50283d..45a5910379a5 100644 --- a/drivers/clk/sunxi-ng/Makefile +++ b/drivers/clk/sunxi-ng/Makefile @@ -1,5 +1,6 @@ # Common objects lib-$(CONFIG_SUNXI_CCU) += ccu_common.o +lib-$(CONFIG_SUNXI_CCU) += ccu_mmc_timing.o lib-$(CONFIG_SUNXI_CCU) += ccu_reset.o # Base clock types diff --git a/drivers/clk/sunxi-ng/ccu_common.h b/drivers/clk/sunxi-ng/ccu_common.h index d6fdd7a789aa..cadd1a9f93b6 100644 --- a/drivers/clk/sunxi-ng/ccu_common.h +++ b/drivers/clk/sunxi-ng/ccu_common.h @@ -23,6 +23,10 @@ #define CCU_FEATURE_FIXED_POSTDIV BIT(3) #define CCU_FEATURE_ALL_PREDIV BIT(4) #define CCU_FEATURE_LOCK_REG BIT(5) +#define CCU_FEATURE_MMC_TIMING_SWITCH BIT(6) + +/* MMC timing mode switch bit */ +#define CCU_MMC_NEW_TIMING_MODE BIT(30) struct device_node; diff --git a/drivers/clk/sunxi-ng/ccu_mmc_timing.c b/drivers/clk/sunxi-ng/ccu_mmc_timing.c new file mode 100644 index 000000000000..f9869f7353c0 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu_mmc_timing.c @@ -0,0 +1,70 @@ +/* + * Copyright (c) 2017 Chen-Yu Tsai. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include + +#include "ccu_common.h" + +/** + * sunxi_ccu_set_mmc_timing_mode: Configure the MMC clock timing mode + * @clk: clock to be configured + * @new_mode: true for new timing mode introduced in A83T and later + * + * Returns 0 on success, -ENOTSUPP if the clock does not support + * switching modes. + */ +int sunxi_ccu_set_mmc_timing_mode(struct clk *clk, bool new_mode) +{ + struct clk_hw *hw = __clk_get_hw(clk); + struct ccu_common *cm = hw_to_ccu_common(hw); + unsigned long flags; + u32 val; + + if (!(cm->features & CCU_FEATURE_MMC_TIMING_SWITCH)) + return -ENOTSUPP; + + spin_lock_irqsave(cm->lock, flags); + + val = readl(cm->base + cm->reg); + if (new_mode) + val |= CCU_MMC_NEW_TIMING_MODE; + else + val &= ~CCU_MMC_NEW_TIMING_MODE; + writel(val, cm->base + cm->reg); + + spin_unlock_irqrestore(cm->lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(sunxi_ccu_set_mmc_timing_mode); + +/** + * sunxi_ccu_set_mmc_timing_mode: Get the current MMC clock timing mode + * @clk: clock to query + * + * Returns 0 if the clock is in old timing mode, > 0 if it is in + * new timing mode, and -ENOTSUPP if the clock does not support + * this function. + */ +int sunxi_ccu_get_mmc_timing_mode(struct clk *clk) +{ + struct clk_hw *hw = __clk_get_hw(clk); + struct ccu_common *cm = hw_to_ccu_common(hw); + + if (!(cm->features & CCU_FEATURE_MMC_TIMING_SWITCH)) + return -ENOTSUPP; + + return !!(readl(cm->base + cm->reg) & CCU_MMC_NEW_TIMING_MODE); +} +EXPORT_SYMBOL_GPL(sunxi_ccu_get_mmc_timing_mode); diff --git a/include/linux/clk/sunxi-ng.h b/include/linux/clk/sunxi-ng.h new file mode 100644 index 000000000000..990f760f70e5 --- /dev/null +++ b/include/linux/clk/sunxi-ng.h @@ -0,0 +1,35 @@ +/* + * Copyright (c) 2017 Chen-Yu Tsai. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _LINUX_CLK_SUNXI_NG_H_ +#define _LINUX_CLK_SUNXI_NG_H_ + +#include + +#ifdef CONFIG_SUNXI_CCU +int sunxi_ccu_set_mmc_timing_mode(struct clk *clk, bool new_mode); +int sunxi_ccu_get_mmc_timing_mode(struct clk *clk); +#else +static inline int sunxi_ccu_set_mmc_timing_mode(struct clk *clk, + bool new_mode) +{ + return -ENOTSUPP; +} + +static inline int sunxi_ccu_get_mmc_timing_mode(struct clk *clk) +{ + return -ENOTSUPP; +} +#endif + +#endif -- cgit v1.2.3 From 5124b59202eb3118eba5ac2222dc00f3390549a8 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 9 Aug 2017 21:00:41 +0200 Subject: mmc: renesas_sdhi: use extra flag for CBSY usage There is one SDHI instance on Gen2 which does not have the CBSY bit. So, turn CBSY usage into an extra flag and set it accordingly. This has the additional advantage that we can also set it for other incarnations later. Signed-off-by: Wolfram Sang Tested-by: Chris Brandt Reviewed-by: Simon Horman Signed-off-by: Ulf Hansson --- drivers/mmc/host/renesas_sdhi_core.c | 6 +++++- drivers/mmc/host/renesas_sdhi_internal_dmac.c | 3 ++- drivers/mmc/host/renesas_sdhi_sys_dmac.c | 6 ++++-- include/linux/mfd/tmio.h | 3 +++ 4 files changed, 14 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c index dd215723fa43..2dea4039c091 100644 --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -429,7 +429,7 @@ static int renesas_sdhi_write16_hook(struct tmio_mmc_host *host, int addr) case CTL_TRANSACTION_CTL: case CTL_DMA_ENABLE: case EXT_ACC: - if (host->pdata->flags & TMIO_MMC_MIN_RCAR2) + if (host->pdata->flags & TMIO_MMC_HAVE_CBSY) bit = TMIO_STAT_CMD_BUSY; /* fallthrough */ case CTL_SD_CARD_CLK_CTL: @@ -588,6 +588,10 @@ int renesas_sdhi_probe(struct platform_device *pdev, if (ret < 0) goto efree; + /* One Gen2 SDHI incarnation does NOT have a CBSY bit */ + if (sd_ctrl_read16(host, CTL_VERSION) == SDHI_VER_GEN2_SDR50) + mmc_data->flags &= ~TMIO_MMC_HAVE_CBSY; + /* Enable tuning iff we have an SCC and a supported mode */ if (of_data && of_data->scc_offset && (host->mmc->caps & MMC_CAP_UHS_SDR104 || diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index 3a8257742040..f905f2361d12 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -72,7 +72,8 @@ static struct renesas_sdhi_scc rcar_gen3_scc_taps[] = { static const struct renesas_sdhi_of_data of_rcar_gen3_compatible = { .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE | - TMIO_MMC_CLK_ACTUAL | TMIO_MMC_MIN_RCAR2, + TMIO_MMC_CLK_ACTUAL | TMIO_MMC_HAVE_CBSY | + TMIO_MMC_MIN_RCAR2, .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_CMD23, .bus_shift = 2, diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c b/drivers/mmc/host/renesas_sdhi_sys_dmac.c index 718cb8a9d2ce..9b77f521cd2c 100644 --- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c @@ -58,7 +58,8 @@ static struct renesas_sdhi_scc rcar_gen2_scc_taps[] = { static const struct renesas_sdhi_of_data of_rcar_gen2_compatible = { .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE | - TMIO_MMC_CLK_ACTUAL | TMIO_MMC_MIN_RCAR2, + TMIO_MMC_CLK_ACTUAL | TMIO_MMC_HAVE_CBSY | + TMIO_MMC_MIN_RCAR2, .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_CMD23, .dma_buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES, @@ -78,7 +79,8 @@ static struct renesas_sdhi_scc rcar_gen3_scc_taps[] = { static const struct renesas_sdhi_of_data of_rcar_gen3_compatible = { .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE | - TMIO_MMC_CLK_ACTUAL | TMIO_MMC_MIN_RCAR2, + TMIO_MMC_CLK_ACTUAL | TMIO_MMC_HAVE_CBSY | + TMIO_MMC_MIN_RCAR2, .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_CMD23, .bus_shift = 2, diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 18b17a39d465..b572955e6de6 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -107,6 +107,9 @@ */ #define TMIO_MMC_CLK_ACTUAL BIT(10) +/* Some controllers have a CBSY bit */ +#define TMIO_MMC_HAVE_CBSY BIT(11) + int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state); -- cgit v1.2.3 From dc8d68bb6c6f7d7fb1aeb3450c0654598e4f4e52 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 10 Aug 2017 15:08:11 +0300 Subject: mmc: core: Remove unused MMC_CAP2_PACKED_CMD Packed commands support was removed but some bits got left behind. Remove them. Signed-off-by: Adrian Hunter Reviewed-by: Linus Walleij Signed-off-by: Ulf Hansson --- drivers/mmc/core/mmc.c | 23 ----------------------- include/linux/mmc/host.h | 4 ---- 2 files changed, 27 deletions(-) (limited to 'include') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index a65f56bea4f3..a7eb623f8daa 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1790,29 +1790,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, */ card->reenable_cmdq = card->ext_csd.cmdq_en; - /* - * The mandatory minimum values are defined for packed command. - * read: 5, write: 3 - */ - if (card->ext_csd.max_packed_writes >= 3 && - card->ext_csd.max_packed_reads >= 5 && - host->caps2 & MMC_CAP2_PACKED_CMD) { - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_EXP_EVENTS_CTRL, - EXT_CSD_PACKED_EVENT_EN, - card->ext_csd.generic_cmd6_time); - if (err && err != -EBADMSG) - goto free_card; - if (err) { - pr_warn("%s: Enabling packed event failed\n", - mmc_hostname(card->host)); - card->ext_csd.packed_event_en = 0; - err = 0; - } else { - card->ext_csd.packed_event_en = 1; - } - } - if (!oldcard) host->card = card; diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 4617c21f97f7..e92629518f68 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -291,10 +291,6 @@ struct mmc_host { MMC_CAP2_HS200_1_2V_SDR) #define MMC_CAP2_CD_ACTIVE_HIGH (1 << 10) /* Card-detect signal active high */ #define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */ -#define MMC_CAP2_PACKED_RD (1 << 12) /* Allow packed read */ -#define MMC_CAP2_PACKED_WR (1 << 13) /* Allow packed write */ -#define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \ - MMC_CAP2_PACKED_WR) #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */ #define MMC_CAP2_HS400_1_8V (1 << 15) /* Can support HS400 1.8V */ #define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */ -- cgit v1.2.3 From d2f82254e4e862662e7820953b049b7d4d660ec7 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 10 Aug 2017 15:08:07 +0300 Subject: mmc: core: Add members to mmc_request and mmc_data for CQE's Most of the information needed to issue requests to a CQE is already in struct mmc_request and struct mmc_data. Add data block address, some flags, and the task id (tag), and allow for cmd being NULL which it is for CQE tasks. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- include/linux/mmc/core.h | 13 +++++++++++-- include/trace/events/mmc.h | 36 +++++++++++++++++++++++------------- 2 files changed, 34 insertions(+), 15 deletions(-) (limited to 'include') diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index a0c63ea28796..bf1788a224e6 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -122,11 +122,18 @@ struct mmc_data { unsigned int timeout_clks; /* data timeout (in clocks) */ unsigned int blksz; /* data block size */ unsigned int blocks; /* number of blocks */ + unsigned int blk_addr; /* block address */ int error; /* data error */ unsigned int flags; -#define MMC_DATA_WRITE (1 << 8) -#define MMC_DATA_READ (1 << 9) +#define MMC_DATA_WRITE BIT(8) +#define MMC_DATA_READ BIT(9) +/* Extra flags used by CQE */ +#define MMC_DATA_QBR BIT(10) /* CQE queue barrier*/ +#define MMC_DATA_PRIO BIT(11) /* CQE high priority */ +#define MMC_DATA_REL_WR BIT(12) /* Reliable write */ +#define MMC_DATA_DAT_TAG BIT(13) /* Tag request */ +#define MMC_DATA_FORCED_PRG BIT(14) /* Forced programming */ unsigned int bytes_xfered; @@ -153,6 +160,8 @@ struct mmc_request { /* Allow other commands during this ongoing data transfer or busy wait */ bool cap_cmd_during_tfr; + + int tag; }; struct mmc_card; diff --git a/include/trace/events/mmc.h b/include/trace/events/mmc.h index a72f9b94c80b..f30a99ac65b6 100644 --- a/include/trace/events/mmc.h +++ b/include/trace/events/mmc.h @@ -29,8 +29,10 @@ TRACE_EVENT(mmc_request_start, __field(unsigned int, sbc_flags) __field(unsigned int, sbc_retries) __field(unsigned int, blocks) + __field(unsigned int, blk_addr) __field(unsigned int, blksz) __field(unsigned int, data_flags) + __field(int, tag) __field(unsigned int, can_retune) __field(unsigned int, doing_retune) __field(unsigned int, retune_now) @@ -42,10 +44,10 @@ TRACE_EVENT(mmc_request_start, ), TP_fast_assign( - __entry->cmd_opcode = mrq->cmd->opcode; - __entry->cmd_arg = mrq->cmd->arg; - __entry->cmd_flags = mrq->cmd->flags; - __entry->cmd_retries = mrq->cmd->retries; + __entry->cmd_opcode = mrq->cmd ? mrq->cmd->opcode : 0; + __entry->cmd_arg = mrq->cmd ? mrq->cmd->arg : 0; + __entry->cmd_flags = mrq->cmd ? mrq->cmd->flags : 0; + __entry->cmd_retries = mrq->cmd ? mrq->cmd->retries : 0; __entry->stop_opcode = mrq->stop ? mrq->stop->opcode : 0; __entry->stop_arg = mrq->stop ? mrq->stop->arg : 0; __entry->stop_flags = mrq->stop ? mrq->stop->flags : 0; @@ -56,7 +58,9 @@ TRACE_EVENT(mmc_request_start, __entry->sbc_retries = mrq->sbc ? mrq->sbc->retries : 0; __entry->blksz = mrq->data ? mrq->data->blksz : 0; __entry->blocks = mrq->data ? mrq->data->blocks : 0; + __entry->blk_addr = mrq->data ? mrq->data->blk_addr : 0; __entry->data_flags = mrq->data ? mrq->data->flags : 0; + __entry->tag = mrq->tag; __entry->can_retune = host->can_retune; __entry->doing_retune = host->doing_retune; __entry->retune_now = host->retune_now; @@ -71,8 +75,8 @@ TRACE_EVENT(mmc_request_start, "cmd_opcode=%u cmd_arg=0x%x cmd_flags=0x%x cmd_retries=%u " "stop_opcode=%u stop_arg=0x%x stop_flags=0x%x stop_retries=%u " "sbc_opcode=%u sbc_arg=0x%x sbc_flags=0x%x sbc_retires=%u " - "blocks=%u block_size=%u data_flags=0x%x " - "can_retune=%u doing_retune=%u retune_now=%u " + "blocks=%u block_size=%u blk_addr=%u data_flags=0x%x " + "tag=%d can_retune=%u doing_retune=%u retune_now=%u " "need_retune=%d hold_retune=%d retune_period=%u", __get_str(name), __entry->mrq, __entry->cmd_opcode, __entry->cmd_arg, @@ -81,7 +85,8 @@ TRACE_EVENT(mmc_request_start, __entry->stop_flags, __entry->stop_retries, __entry->sbc_opcode, __entry->sbc_arg, __entry->sbc_flags, __entry->sbc_retries, - __entry->blocks, __entry->blksz, __entry->data_flags, + __entry->blocks, __entry->blk_addr, + __entry->blksz, __entry->data_flags, __entry->tag, __entry->can_retune, __entry->doing_retune, __entry->retune_now, __entry->need_retune, __entry->hold_retune, __entry->retune_period) @@ -108,6 +113,7 @@ TRACE_EVENT(mmc_request_done, __field(unsigned int, sbc_retries) __field(unsigned int, bytes_xfered) __field(int, data_err) + __field(int, tag) __field(unsigned int, can_retune) __field(unsigned int, doing_retune) __field(unsigned int, retune_now) @@ -119,10 +125,13 @@ TRACE_EVENT(mmc_request_done, ), TP_fast_assign( - __entry->cmd_opcode = mrq->cmd->opcode; - __entry->cmd_err = mrq->cmd->error; - memcpy(__entry->cmd_resp, mrq->cmd->resp, 4); - __entry->cmd_retries = mrq->cmd->retries; + __entry->cmd_opcode = mrq->cmd ? mrq->cmd->opcode : 0; + __entry->cmd_err = mrq->cmd ? mrq->cmd->error : 0; + __entry->cmd_resp[0] = mrq->cmd ? mrq->cmd->resp[0] : 0; + __entry->cmd_resp[1] = mrq->cmd ? mrq->cmd->resp[1] : 0; + __entry->cmd_resp[2] = mrq->cmd ? mrq->cmd->resp[2] : 0; + __entry->cmd_resp[3] = mrq->cmd ? mrq->cmd->resp[3] : 0; + __entry->cmd_retries = mrq->cmd ? mrq->cmd->retries : 0; __entry->stop_opcode = mrq->stop ? mrq->stop->opcode : 0; __entry->stop_err = mrq->stop ? mrq->stop->error : 0; __entry->stop_resp[0] = mrq->stop ? mrq->stop->resp[0] : 0; @@ -139,6 +148,7 @@ TRACE_EVENT(mmc_request_done, __entry->sbc_retries = mrq->sbc ? mrq->sbc->retries : 0; __entry->bytes_xfered = mrq->data ? mrq->data->bytes_xfered : 0; __entry->data_err = mrq->data ? mrq->data->error : 0; + __entry->tag = mrq->tag; __entry->can_retune = host->can_retune; __entry->doing_retune = host->doing_retune; __entry->retune_now = host->retune_now; @@ -154,7 +164,7 @@ TRACE_EVENT(mmc_request_done, "cmd_retries=%u stop_opcode=%u stop_err=%d " "stop_resp=0x%x 0x%x 0x%x 0x%x stop_retries=%u " "sbc_opcode=%u sbc_err=%d sbc_resp=0x%x 0x%x 0x%x 0x%x " - "sbc_retries=%u bytes_xfered=%u data_err=%d " + "sbc_retries=%u bytes_xfered=%u data_err=%d tag=%d " "can_retune=%u doing_retune=%u retune_now=%u need_retune=%d " "hold_retune=%d retune_period=%u", __get_str(name), __entry->mrq, @@ -170,7 +180,7 @@ TRACE_EVENT(mmc_request_done, __entry->sbc_resp[0], __entry->sbc_resp[1], __entry->sbc_resp[2], __entry->sbc_resp[3], __entry->sbc_retries, - __entry->bytes_xfered, __entry->data_err, + __entry->bytes_xfered, __entry->data_err, __entry->tag, __entry->can_retune, __entry->doing_retune, __entry->retune_now, __entry->need_retune, __entry->hold_retune, __entry->retune_period) -- cgit v1.2.3 From d3bf68ae04c7e29ed3c30b7f4b1f0c6a4a11c7f1 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 25 Aug 2017 15:43:46 +0300 Subject: mmc: host: Add CQE interface Add CQE host operations, capabilities, and host members. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- include/linux/mmc/core.h | 6 ++++++ include/linux/mmc/host.h | 53 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 59 insertions(+) (limited to 'include') diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index bf1788a224e6..c6d17f626234 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -156,6 +156,12 @@ struct mmc_request { struct completion completion; struct completion cmd_completion; void (*done)(struct mmc_request *);/* completion function */ + /* + * Notify uppers layers (e.g. mmc block driver) that recovery is needed + * due to an error associated with the mmc_request. Currently used only + * by CQE. + */ + void (*recovery_notifier)(struct mmc_request *); struct mmc_host *host; /* Allow other commands during this ongoing data transfer or busy wait */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index e92629518f68..f3f2d07feb2a 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -162,6 +162,50 @@ struct mmc_host_ops { unsigned int direction, int blk_size); }; +struct mmc_cqe_ops { + /* Allocate resources, and make the CQE operational */ + int (*cqe_enable)(struct mmc_host *host, struct mmc_card *card); + /* Free resources, and make the CQE non-operational */ + void (*cqe_disable)(struct mmc_host *host); + /* + * Issue a read, write or DCMD request to the CQE. Also deal with the + * effect of ->cqe_off(). + */ + int (*cqe_request)(struct mmc_host *host, struct mmc_request *mrq); + /* Free resources (e.g. DMA mapping) associated with the request */ + void (*cqe_post_req)(struct mmc_host *host, struct mmc_request *mrq); + /* + * Prepare the CQE and host controller to accept non-CQ commands. There + * is no corresponding ->cqe_on(), instead ->cqe_request() is required + * to deal with that. + */ + void (*cqe_off)(struct mmc_host *host); + /* + * Wait for all CQE tasks to complete. Return an error if recovery + * becomes necessary. + */ + int (*cqe_wait_for_idle)(struct mmc_host *host); + /* + * Notify CQE that a request has timed out. Return false if the request + * completed or true if a timeout happened in which case indicate if + * recovery is needed. + */ + bool (*cqe_timeout)(struct mmc_host *host, struct mmc_request *mrq, + bool *recovery_needed); + /* + * Stop all CQE activity and prepare the CQE and host controller to + * accept recovery commands. + */ + void (*cqe_recovery_start)(struct mmc_host *host); + /* + * Clear the queue and call mmc_cqe_request_done() on all requests. + * Requests that errored will have the error set on the mmc_request + * (data->error or cmd->error for DCMD). Requests that did not error + * will have zero data bytes transferred. + */ + void (*cqe_recovery_finish)(struct mmc_host *host); +}; + struct mmc_async_req { /* active mmc request */ struct mmc_request *mrq; @@ -303,6 +347,8 @@ struct mmc_host { #define MMC_CAP2_HS400_ES (1 << 20) /* Host supports enhanced strobe */ #define MMC_CAP2_NO_SD (1 << 21) /* Do not send SD commands during initialization */ #define MMC_CAP2_NO_MMC (1 << 22) /* Do not send (e)MMC commands during initialization */ +#define MMC_CAP2_CQE (1 << 23) /* Has eMMC command queue engine */ +#define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */ mmc_pm_flag_t pm_caps; /* supported pm features */ @@ -386,6 +432,13 @@ struct mmc_host { int dsr_req; /* DSR value is valid */ u32 dsr; /* optional driver stage (DSR) value */ + /* Command Queue Engine (CQE) support */ + const struct mmc_cqe_ops *cqe_ops; + void *cqe_private; + int cqe_qdepth; + bool cqe_enabled; + bool cqe_on; + unsigned long private[0] ____cacheline_aligned; }; -- cgit v1.2.3 From 906d5ff6188953f4981df39e9999f858542df9ce Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 25 Aug 2017 15:43:44 +0300 Subject: mmc: core: Move mmc_start_areq() declaration mmc_start_areq() is an internal mmc core API. Move the declaration accordingly. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/core/core.h | 6 ++++++ include/linux/mmc/core.h | 4 ---- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 55f543fd37c4..ca861091a776 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -107,6 +107,12 @@ static inline void mmc_unregister_pm_notifier(struct mmc_host *host) { } void mmc_wait_for_req_done(struct mmc_host *host, struct mmc_request *mrq); bool mmc_is_req_done(struct mmc_host *host, struct mmc_request *mrq); +struct mmc_async_req; + +struct mmc_async_req *mmc_start_areq(struct mmc_host *host, + struct mmc_async_req *areq, + enum mmc_blk_status *ret_stat); + int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr, unsigned int arg); int mmc_can_erase(struct mmc_card *card); diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index c6d17f626234..927519385482 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -171,11 +171,7 @@ struct mmc_request { }; struct mmc_card; -struct mmc_async_req; -struct mmc_async_req *mmc_start_areq(struct mmc_host *host, - struct mmc_async_req *areq, - enum mmc_blk_status *ret_stat); void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq); int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries); -- cgit v1.2.3