From 9a1dc3891255afd836f355b117fd6b975d0b1eb2 Mon Sep 17 00:00:00 2001
From: Shawn Lin <shawn.lin@rock-chips.com>
Date: Mon, 14 Nov 2016 15:21:14 -0600
Subject: of/pci: Add of_pci_get_max_link_speed() to parse max-link-speed from
 DT

This new helper function could be used by host drivers to get the limitaion
of max link speed provided by DT.  If the property isn't assigned or is
invalid, it will return -EINVAL to the caller.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 include/linux/of_pci.h | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'include')

diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
index 7fd5cfce9140..0e0974eceb80 100644
--- a/include/linux/of_pci.h
+++ b/include/linux/of_pci.h
@@ -16,6 +16,7 @@ int of_pci_get_devfn(struct device_node *np);
 int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin);
 int of_pci_parse_bus_range(struct device_node *node, struct resource *res);
 int of_get_pci_domain_nr(struct device_node *node);
+int of_pci_get_max_link_speed(struct device_node *node);
 void of_pci_check_probe_only(void);
 int of_pci_map_rid(struct device_node *np, u32 rid,
 		   const char *map_name, const char *map_mask_name,
@@ -62,6 +63,12 @@ static inline int of_pci_map_rid(struct device_node *np, u32 rid,
 	return -EINVAL;
 }
 
+static inline int
+of_pci_get_max_link_speed(struct device_node *node)
+{
+	return -EINVAL;
+}
+
 static inline void of_pci_check_probe_only(void) { }
 #endif
 
-- 
cgit v1.2.3


From 7254383341bc6e1a61996accd836009f0c922b21 Mon Sep 17 00:00:00 2001
From: Noa Osherovich <noaos@mellanox.com>
Date: Thu, 17 Nov 2016 16:06:56 -0600
Subject: PCI: Add Mellanox device IDs

Add Mellanox device IDs for use by the mlx4 driver and INTx quirks.

[bhelgaas: sorted and adapted from
http://lkml.kernel.org/r/1478011644-12080-1-git-send-email-noaos@mellanox.com]
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 include/linux/pci_ids.h | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

(limited to 'include')

diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c58752fe16c4..f020ab4079d3 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2256,12 +2256,29 @@
 #define PCI_DEVICE_ID_ZOLTRIX_2BD0	0x2bd0
 
 #define PCI_VENDOR_ID_MELLANOX		0x15b3
-#define PCI_DEVICE_ID_MELLANOX_TAVOR	0x5a44
+#define PCI_DEVICE_ID_MELLANOX_CONNECTX3	0x1003
+#define PCI_DEVICE_ID_MELLANOX_CONNECTX3_PRO	0x1007
+#define PCI_DEVICE_ID_MELLANOX_CONNECTIB	0x1011
+#define PCI_DEVICE_ID_MELLANOX_CONNECTX4	0x1013
+#define PCI_DEVICE_ID_MELLANOX_CONNECTX4_LX	0x1015
+#define PCI_DEVICE_ID_MELLANOX_TAVOR		0x5a44
 #define PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE	0x5a46
-#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278
-#define PCI_DEVICE_ID_MELLANOX_ARBEL	0x6282
-#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c
-#define PCI_DEVICE_ID_MELLANOX_SINAI	0x6274
+#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD	0x5e8c
+#define PCI_DEVICE_ID_MELLANOX_SINAI		0x6274
+#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT	0x6278
+#define PCI_DEVICE_ID_MELLANOX_ARBEL		0x6282
+#define PCI_DEVICE_ID_MELLANOX_HERMON_SDR	0x6340
+#define PCI_DEVICE_ID_MELLANOX_HERMON_DDR	0x634a
+#define PCI_DEVICE_ID_MELLANOX_HERMON_QDR	0x6354
+#define PCI_DEVICE_ID_MELLANOX_HERMON_EN	0x6368
+#define PCI_DEVICE_ID_MELLANOX_CONNECTX_EN	0x6372
+#define PCI_DEVICE_ID_MELLANOX_HERMON_DDR_GEN2	0x6732
+#define PCI_DEVICE_ID_MELLANOX_HERMON_QDR_GEN2	0x673c
+#define PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_5_GEN2 0x6746
+#define PCI_DEVICE_ID_MELLANOX_HERMON_EN_GEN2	0x6750
+#define PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_T_GEN2 0x675a
+#define PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_GEN2	0x6764
+#define PCI_DEVICE_ID_MELLANOX_CONNECTX2	0x676e
 
 #define PCI_VENDOR_ID_DFI		0x15bd
 
-- 
cgit v1.2.3


From 437eb7bf7b28472f8b7689e166dc1dd691367121 Mon Sep 17 00:00:00 2001
From: Lukas Wunner <lukas@wunner.de>
Date: Fri, 28 Oct 2016 10:52:06 +0200
Subject: ACPI / hotplug / PCI: Make device_is_managed_by_native_pciehp()
 public

We're about to add runtime PM of hotplug ports, but we need to restrict it
to ports that are handled natively by the OS:  If they're handled by the
firmware (which is the case for Thunderbolt on non-Macs), things would
break if the OS put the ports into D3hot behind the firmware's back.

To determine if a hotplug port is handled natively, one has to walk up from
the port to the root bridge and check the cached _OSC Control Field for the
value of the "PCI Express Native Hot Plug control" bit.  There's already a
function to do that, device_is_managed_by_native_pciehp(), but it's private
to drivers/pci/hotplug/acpiphp_glue.c and only compiled in if
CONFIG_HOTPLUG_PCI_ACPI is enabled.

Make it public and move it to drivers/pci/pci-acpi.c, so that it is
available in the more general CONFIG_ACPI case.

The function contains a check if the device in question is a hotplug port
and returns false if it's not.  The caller we're going to add doesn't need
this as it only calls the function if it actually *is* a hotplug port.
Move the check out of the function into the single existing caller.

Rename it to pciehp_is_native() and add some kerneldoc and polish.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/pci/hotplug/acpiphp_glue.c | 28 +---------------------------
 drivers/pci/pci-acpi.c             | 24 ++++++++++++++++++++++++
 include/linux/pci_hotplug.h        |  2 ++
 3 files changed, 27 insertions(+), 27 deletions(-)

(limited to 'include')

diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index b286a56e84b3..5ed2dcaa8e27 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -222,32 +222,6 @@ static void acpiphp_post_dock_fixup(struct acpi_device *adev)
 	acpiphp_let_context_go(context);
 }
 
-/* Check whether the PCI device is managed by native PCIe hotplug driver */
-static bool device_is_managed_by_native_pciehp(struct pci_dev *pdev)
-{
-	acpi_handle tmp;
-	struct acpi_pci_root *root;
-
-	/* Check whether the PCIe port supports native PCIe hotplug */
-	if (!pdev->is_hotplug_bridge)
-		return false;
-
-	/*
-	 * Check whether native PCIe hotplug has been enabled for
-	 * this PCIe hierarchy.
-	 */
-	tmp = acpi_find_root_bridge_handle(pdev);
-	if (!tmp)
-		return false;
-	root = acpi_pci_find_root(tmp);
-	if (!root)
-		return false;
-	if (!(root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
-		return false;
-
-	return true;
-}
-
 /**
  * acpiphp_add_context - Add ACPIPHP context to an ACPI device object.
  * @handle: ACPI handle of the object to add a context to.
@@ -331,7 +305,7 @@ static acpi_status acpiphp_add_context(acpi_handle handle, u32 lvl, void *data,
 	 * expose slots to user space in those cases.
 	 */
 	if ((acpi_pci_check_ejectable(pbus, handle) || is_dock_device(adev))
-	    && !(pdev && device_is_managed_by_native_pciehp(pdev))) {
+	    && !(pdev && pdev->is_hotplug_bridge && pciehp_is_native(pdev))) {
 		unsigned long long sun;
 		int retval;
 
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index d966d47c9e80..ed3daa8e7658 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -293,6 +293,30 @@ int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp)
 }
 EXPORT_SYMBOL_GPL(pci_get_hp_params);
 
+/**
+ * pciehp_is_native - Check whether a hotplug port is handled by the OS
+ * @pdev: Hotplug port to check
+ *
+ * Walk up from @pdev to the host bridge, obtain its cached _OSC Control Field
+ * and return the value of the "PCI Express Native Hot Plug control" bit.
+ * On failure to obtain the _OSC Control Field return %false.
+ */
+bool pciehp_is_native(struct pci_dev *pdev)
+{
+	struct acpi_pci_root *root;
+	acpi_handle handle;
+
+	handle = acpi_find_root_bridge_handle(pdev);
+	if (!handle)
+		return false;
+
+	root = acpi_pci_find_root(handle);
+	if (!root)
+		return false;
+
+	return root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL;
+}
+
 /**
  * pci_acpi_wake_bus - Root bus wakeup notification fork function.
  * @work: Work item to handle.
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 8c7895061121..2e855afa0212 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -176,6 +176,7 @@ struct hotplug_params {
 #ifdef CONFIG_ACPI
 #include <linux/acpi.h>
 int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp);
+bool pciehp_is_native(struct pci_dev *pdev);
 int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
 int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle);
 int acpi_pci_detect_ejectable(acpi_handle handle);
@@ -185,5 +186,6 @@ static inline int pci_get_hp_params(struct pci_dev *dev,
 {
 	return -ENODEV;
 }
+static inline bool pciehp_is_native(struct pci_dev *pdev) { return true; }
 #endif
 #endif
-- 
cgit v1.2.3


From 00710984eac523ffed4e92850511d7610cfe908b Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bhelgaas@google.com>
Date: Wed, 30 Nov 2016 14:47:13 -0600
Subject: ACPI: Add acpi_resource_consumer() to find device that claims a
 resource

Add acpi_resource_consumer().  This takes a struct resource and searches
the ACPI namespace for a device whose current resource settings (_CRS)
includes the resource.  It returns the device if it exists, or NULL if no
device uses the resource.

If more than one device uses the resource (this may happen in the case of
bridges), acpi_resource_consumer() returns the first one found by
acpi_get_devices() in its modified depth-first walk of the namespace.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/acpi/resource.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/acpi.h    |  7 ++++++
 2 files changed, 64 insertions(+)

(limited to 'include')

diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 56241eb341f4..cb57962ef7c4 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -664,3 +664,60 @@ int acpi_dev_filter_resource_type(struct acpi_resource *ares,
 	return (type & types) ? 0 : 1;
 }
 EXPORT_SYMBOL_GPL(acpi_dev_filter_resource_type);
+
+static int acpi_dev_consumes_res(struct acpi_device *adev, struct resource *res)
+{
+	struct list_head resource_list;
+	struct resource_entry *rentry;
+	int ret, found = 0;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+	if (ret < 0)
+		return 0;
+
+	list_for_each_entry(rentry, &resource_list, node) {
+		if (resource_contains(rentry->res, res)) {
+			found = 1;
+			break;
+		}
+
+	}
+
+	acpi_dev_free_resource_list(&resource_list);
+	return found;
+}
+
+static acpi_status acpi_res_consumer_cb(acpi_handle handle, u32 depth,
+					 void *context, void **ret)
+{
+	struct resource *res = context;
+	struct acpi_device **consumer = (struct acpi_device **) ret;
+	struct acpi_device *adev;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+
+	if (acpi_dev_consumes_res(adev, res)) {
+		*consumer = adev;
+		return AE_CTRL_TERMINATE;
+	}
+
+	return AE_OK;
+}
+
+/**
+ * acpi_resource_consumer - Find the ACPI device that consumes @res.
+ * @res: Resource to search for.
+ *
+ * Search the current resource settings (_CRS) of every ACPI device node
+ * for @res.  If we find an ACPI device whose _CRS includes @res, return
+ * it.  Otherwise, return NULL.
+ */
+struct acpi_device *acpi_resource_consumer(struct resource *res)
+{
+	struct acpi_device *consumer = NULL;
+
+	acpi_get_devices(NULL, acpi_res_consumer_cb, res, (void **) &consumer);
+	return consumer;
+}
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index ddbeda6dbdc8..b00ad73c946d 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -419,6 +419,8 @@ static inline int acpi_dev_filter_resource_type_cb(struct acpi_resource *ares,
 	return acpi_dev_filter_resource_type(ares, (unsigned long)arg);
 }
 
+struct acpi_device *acpi_resource_consumer(struct resource *res);
+
 int acpi_check_resource_conflict(const struct resource *res);
 
 int acpi_check_region(resource_size_t start, resource_size_t n,
@@ -762,6 +764,11 @@ static inline int acpi_reconfig_notifier_unregister(struct notifier_block *nb)
 	return -EINVAL;
 }
 
+static inline struct acpi_device *acpi_resource_consumer(struct resource *res)
+{
+	return NULL;
+}
+
 #endif	/* !CONFIG_ACPI */
 
 #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
-- 
cgit v1.2.3


From 13983eb89d5afaa65acd4479fad151cbd4de5509 Mon Sep 17 00:00:00 2001
From: Tomasz Nowicki <tn@semihalf.com>
Date: Fri, 9 Sep 2016 21:24:03 +0200
Subject: PCI/ACPI: Extend pci_mcfg_lookup() to return ECAM config accessors

pci_mcfg_lookup() is the external interface to the generic MCFG code.
Previously it merely looked up the ECAM base address for a given domain and
bus range.  We want a way to add MCFG quirks, some of which may require
special config accessors and adjustments to the ECAM address range.

Extend pci_mcfg_lookup() so it can return a pointer to a pci_ecam_ops
structure and a struct resource for the ECAM address space.  For now, it
always returns &pci_generic_ecam_ops (the standard accessor) and the
resource described by the MCFG.

No functional changes intended.

[bhelgaas: changelog]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 arch/arm64/kernel/pci.c  | 17 +++++------------
 drivers/acpi/pci_mcfg.c  | 28 +++++++++++++++++++++++++---
 include/linux/pci-acpi.h |  4 +++-
 3 files changed, 33 insertions(+), 16 deletions(-)

(limited to 'include')

diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index 266a7b2d4184..4f0e3ebfea4b 100644
--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -137,25 +137,18 @@ pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
 	struct device *dev = &root->device->dev;
 	struct resource *bus_res = &root->secondary;
 	u16 seg = root->segment;
+	struct pci_ecam_ops *ecam_ops;
 	struct resource cfgres;
 	struct acpi_device *adev;
 	struct pci_config_window *cfg;
-	unsigned int bsz;
+	int ret;
 
-	/* Use address from _CBA if present, otherwise lookup MCFG */
-	if (!root->mcfg_addr)
-		root->mcfg_addr = pci_mcfg_lookup(seg, bus_res);
-
-	if (!root->mcfg_addr) {
+	ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
+	if (ret) {
 		dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
 		return NULL;
 	}
 
-	bsz = 1 << pci_generic_ecam_ops.bus_shift;
-	cfgres.start = root->mcfg_addr + bus_res->start * bsz;
-	cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1;
-	cfgres.flags = IORESOURCE_MEM;
-
 	adev = acpi_resource_consumer(&cfgres);
 	if (adev)
 		dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
@@ -164,7 +157,7 @@ pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
 		dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
 			 &cfgres);
 
-	cfg = pci_ecam_create(dev, &cfgres, bus_res, &pci_generic_ecam_ops);
+	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
 	if (IS_ERR(cfg)) {
 		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
 			PTR_ERR(cfg));
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index b5b376e081f5..ffcc6513e851 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
 
 /* Structure to hold entries from the MCFG table */
 struct mcfg_entry {
@@ -35,9 +36,18 @@ struct mcfg_entry {
 /* List to save MCFG entries */
 static LIST_HEAD(pci_mcfg_list);
 
-phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
+int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
+		    struct pci_ecam_ops **ecam_ops)
 {
+	struct pci_ecam_ops *ops = &pci_generic_ecam_ops;
+	struct resource *bus_res = &root->secondary;
+	u16 seg = root->segment;
 	struct mcfg_entry *e;
+	struct resource res;
+
+	/* Use address from _CBA if present, otherwise lookup MCFG */
+	if (root->mcfg_addr)
+		goto skip_lookup;
 
 	/*
 	 * We expect exact match, unless MCFG entry end bus covers more than
@@ -45,10 +55,22 @@ phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
 	 */
 	list_for_each_entry(e, &pci_mcfg_list, list) {
 		if (e->segment == seg && e->bus_start == bus_res->start &&
-		    e->bus_end >= bus_res->end)
-			return e->addr;
+		    e->bus_end >= bus_res->end) {
+			root->mcfg_addr = e->addr;
+		}
+
 	}
 
+	if (!root->mcfg_addr)
+		return -ENXIO;
+
+skip_lookup:
+	memset(&res, 0, sizeof(res));
+	res.start = root->mcfg_addr + (bus_res->start << 20);
+	res.end = res.start + (resource_size(bus_res) << 20) - 1;
+	res.flags = IORESOURCE_MEM;
+	*cfgres = res;
+	*ecam_ops = ops;
 	return 0;
 }
 
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 7d63a66e8ed4..7a4e83a8c89c 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -24,7 +24,9 @@ static inline acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
 }
 extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
 
-extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource *bus_res);
+struct pci_ecam_ops;
+extern int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
+			   struct pci_ecam_ops **ecam_ops);
 
 static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
 {
-- 
cgit v1.2.3


From 2ca5b8ddc6f70d77a51851ba5e5cd0d39c27dd88 Mon Sep 17 00:00:00 2001
From: Christopher Covington <cov@codeaurora.org>
Date: Wed, 2 Nov 2016 11:11:27 -0500
Subject: PCI: Add MCFG quirks for Qualcomm QDF2432 host controller

The Qualcomm Technologies QDF2432 SoC does not support accesses smaller
than 32 bits to the PCI configuration space.  Register the appropriate
quirk.

[bhelgaas: add QCOM_ECAM32 macro, ifdef for ACPI and PCI_QUIRKS]
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/acpi/pci_mcfg.c  | 11 +++++++++++
 drivers/pci/ecam.c       | 12 ++++++++++++
 include/linux/pci-ecam.h |  4 ++++
 3 files changed, 27 insertions(+)

(limited to 'include')

diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index 1ef72857b710..cee33b078d3d 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -51,6 +51,17 @@ struct mcfg_fixup {
 
 static struct mcfg_fixup mcfg_quirks[] = {
 /*	{ OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, ops, cfgres }, */
+
+#define QCOM_ECAM32(seg) \
+	{ "QCOM  ", "QDF2432 ", 1, seg, MCFG_BUS_ANY, &pci_32b_ops }
+	QCOM_ECAM32(0),
+	QCOM_ECAM32(1),
+	QCOM_ECAM32(2),
+	QCOM_ECAM32(3),
+	QCOM_ECAM32(4),
+	QCOM_ECAM32(5),
+	QCOM_ECAM32(6),
+	QCOM_ECAM32(7),
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
diff --git a/drivers/pci/ecam.c b/drivers/pci/ecam.c
index 43ed08dd8b01..2fee61bb6559 100644
--- a/drivers/pci/ecam.c
+++ b/drivers/pci/ecam.c
@@ -162,3 +162,15 @@ struct pci_ecam_ops pci_generic_ecam_ops = {
 		.write		= pci_generic_config_write,
 	}
 };
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+/* ECAM ops for 32-bit access only (non-compliant) */
+struct pci_ecam_ops pci_32b_ops = {
+	.bus_shift	= 20,
+	.pci_ops	= {
+		.map_bus	= pci_ecam_map_bus,
+		.read		= pci_generic_config_read32,
+		.write		= pci_generic_config_write32,
+	}
+};
+#endif
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index 7adad206b1f4..739d2330fd9e 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -59,6 +59,10 @@ void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn,
 /* default ECAM ops */
 extern struct pci_ecam_ops pci_generic_ecam_ops;
 
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+extern struct pci_ecam_ops pci_32b_ops;		/* 32-bit accesses only */
+#endif
+
 #ifdef CONFIG_PCI_HOST_GENERIC
 /* for DT-based PCI controllers that support ECAM */
 int pci_host_common_probe(struct platform_device *pdev,
-- 
cgit v1.2.3


From 5f00f1a0178cf52928366a5e1f376a65f1f3f389 Mon Sep 17 00:00:00 2001
From: Dongdong Liu <liudongdong3@huawei.com>
Date: Thu, 1 Dec 2016 00:45:35 -0600
Subject: PCI: Add MCFG quirks for HiSilicon Hip05/06/07 host controllers

The PCIe controller in Hip05/Hip06/Hip07 SoCs is not completely
ECAM-compliant.  It is non-ECAM only for the RC bus config space; for any
other bus underneath the root bus it does support ECAM access.

Add specific quirks for PCI config space accessors.  This involves:
1. New initialization call hisi_pcie_init() to obtain RC base
addresses from PNP0C02 at the root of the ACPI namespace (under \_SB).
2. New entry in common quirk array.

[bhelgaas: move to pcie-hisi.c and change Makefile/ifdefs so quirk doesn't
depend on CONFIG_PCI_HISI]
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/acpi/pci_mcfg.c      |  12 +++++
 drivers/pci/host/Makefile    |   2 +-
 drivers/pci/host/pcie-hisi.c | 101 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/pci-ecam.h     |   1 +
 4 files changed, 115 insertions(+), 1 deletion(-)

(limited to 'include')

diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index cee33b078d3d..dd162248c3ee 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -62,6 +62,18 @@ static struct mcfg_fixup mcfg_quirks[] = {
 	QCOM_ECAM32(5),
 	QCOM_ECAM32(6),
 	QCOM_ECAM32(7),
+
+#define HISI_QUAD_DOM(table_id, seg, ops) \
+	{ "HISI  ", table_id, 0, (seg) + 0, MCFG_BUS_ANY, ops }, \
+	{ "HISI  ", table_id, 0, (seg) + 1, MCFG_BUS_ANY, ops }, \
+	{ "HISI  ", table_id, 0, (seg) + 2, MCFG_BUS_ANY, ops }, \
+	{ "HISI  ", table_id, 0, (seg) + 3, MCFG_BUS_ANY, ops }
+	HISI_QUAD_DOM("HIP05   ",  0, &hisi_pcie_ops),
+	HISI_QUAD_DOM("HIP06   ",  0, &hisi_pcie_ops),
+	HISI_QUAD_DOM("HIP07   ",  0, &hisi_pcie_ops),
+	HISI_QUAD_DOM("HIP07   ",  4, &hisi_pcie_ops),
+	HISI_QUAD_DOM("HIP07   ",  8, &hisi_pcie_ops),
+	HISI_QUAD_DOM("HIP07   ", 12, &hisi_pcie_ops),
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 084cb4983645..64845f0d6138 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
 obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
 obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
 obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
-obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
+obj-$(CONFIG_ARM64) += pcie-hisi.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
 obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
 obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
diff --git a/drivers/pci/host/pcie-hisi.c b/drivers/pci/host/pcie-hisi.c
index 56154c25980c..9bfa1ab27365 100644
--- a/drivers/pci/host/pcie-hisi.c
+++ b/drivers/pci/host/pcie-hisi.c
@@ -18,7 +18,106 @@
 #include <linux/of_pci.h>
 #include <linux/platform_device.h>
 #include <linux/of_device.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
 #include <linux/regmap.h>
+#include "../pci.h"
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+
+static int hisi_pcie_acpi_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+				  int size, u32 *val)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	int dev = PCI_SLOT(devfn);
+
+	if (bus->number == cfg->busr.start) {
+		/* access only one slot on each root port */
+		if (dev > 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		else
+			return pci_generic_config_read32(bus, devfn, where,
+							 size, val);
+	}
+
+	return pci_generic_config_read(bus, devfn, where, size, val);
+}
+
+static int hisi_pcie_acpi_wr_conf(struct pci_bus *bus, u32 devfn,
+				  int where, int size, u32 val)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	int dev = PCI_SLOT(devfn);
+
+	if (bus->number == cfg->busr.start) {
+		/* access only one slot on each root port */
+		if (dev > 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		else
+			return pci_generic_config_write32(bus, devfn, where,
+							  size, val);
+	}
+
+	return pci_generic_config_write(bus, devfn, where, size, val);
+}
+
+static void __iomem *hisi_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+				       int where)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	void __iomem *reg_base = cfg->priv;
+
+	if (bus->number == cfg->busr.start)
+		return reg_base + where;
+	else
+		return pci_ecam_map_bus(bus, devfn, where);
+}
+
+static int hisi_pcie_init(struct pci_config_window *cfg)
+{
+	struct device *dev = cfg->parent;
+	struct acpi_device *adev = to_acpi_device(dev);
+	struct acpi_pci_root *root = acpi_driver_data(adev);
+	struct resource *res;
+	void __iomem *reg_base;
+	int ret;
+
+	/*
+	 * Retrieve RC base and size from a HISI0081 device with _UID
+	 * matching our segment.
+	 */
+	res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL);
+	if (!res)
+		return -ENOMEM;
+
+	ret = acpi_get_rc_resources(dev, "HISI0081", root->segment, res);
+	if (ret) {
+		dev_err(dev, "can't get rc base address\n");
+		return -ENOMEM;
+	}
+
+	reg_base = devm_ioremap(dev, res->start, resource_size(res));
+	if (!reg_base)
+		return -ENOMEM;
+
+	cfg->priv = reg_base;
+	return 0;
+}
+
+struct pci_ecam_ops hisi_pcie_ops = {
+	.bus_shift    = 20,
+	.init         =  hisi_pcie_init,
+	.pci_ops      = {
+		.map_bus    = hisi_pcie_map_bus,
+		.read       = hisi_pcie_acpi_rd_conf,
+		.write      = hisi_pcie_acpi_wr_conf,
+	}
+};
+
+#endif
+
+#ifdef CONFIG_PCI_HISI
 
 #include "pcie-designware.h"
 
@@ -227,3 +326,5 @@ static struct platform_driver hisi_pcie_driver = {
 	},
 };
 builtin_platform_driver(hisi_pcie_driver);
+
+#endif
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index 739d2330fd9e..bdacbc883a22 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -61,6 +61,7 @@ extern struct pci_ecam_ops pci_generic_ecam_ops;
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 extern struct pci_ecam_ops pci_32b_ops;		/* 32-bit accesses only */
+extern struct pci_ecam_ops hisi_pcie_ops;	/* HiSilicon */
 #endif
 
 #ifdef CONFIG_PCI_HOST_GENERIC
-- 
cgit v1.2.3


From 44f22bd91e88f9a1203a6e564a237e593f5f2f74 Mon Sep 17 00:00:00 2001
From: Tomasz Nowicki <tn@semihalf.com>
Date: Thu, 1 Dec 2016 00:07:56 -0600
Subject: PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller

ThunderX PCIe controller to off-chip devices (so-called PEM) is not fully
compliant with ECAM standard. It uses non-standard configuration space
accessors (see thunder_pem_ecam_ops) and custom configuration space
granulation (see bus_shift = 24). In order to access configuration space
and probe PEM as ACPI-based PCI host controller we need to add MCFG quirk
infrastructure. This involves:
1. A new thunder_pem_acpi_init() init function to locate PEM-specific
   register ranges using ACPI.
2. Export PEM thunder_pem_ecam_ops structure so it is visible to MCFG quirk
   code.
3. New quirk entries for each PEM segment. Each contains platform IDs,
   mentioned thunder_pem_ecam_ops and CFG resources.

Quirk is considered for ThunderX silicon pass2.x only which is identified
via MCFG revision 1.

ThunderX pass 2.x requires the following accessors:

  NUMA Node 0 PCI segments  0- 3: pci_generic_ecam_ops (ECAM-compliant)
  NUMA Node 0 PCI segments  4- 9: thunder_pem_ecam_ops (MCFG quirk)
  NUMA Node 1 PCI segments 10-13: pci_generic_ecam_ops (ECAM-compliant)
  NUMA Node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk)

[bhelgaas: adapt to use acpi_get_rc_resources(), update Makefile/ifdefs so
quirk doesn't depend on CONFIG_PCI_HOST_THUNDER_PEM]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/acpi/pci_mcfg.c            | 19 ++++++++++++++++
 drivers/pci/host/Kconfig           |  3 ++-
 drivers/pci/host/Makefile          |  2 +-
 drivers/pci/host/pci-thunder-pem.c | 44 ++++++++++++++++++++++++++++++++++++++
 include/linux/pci-ecam.h           |  1 +
 5 files changed, 67 insertions(+), 2 deletions(-)

(limited to 'include')

diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index dd162248c3ee..17cbb07ce16c 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -74,6 +74,25 @@ static struct mcfg_fixup mcfg_quirks[] = {
 	HISI_QUAD_DOM("HIP07   ",  4, &hisi_pcie_ops),
 	HISI_QUAD_DOM("HIP07   ",  8, &hisi_pcie_ops),
 	HISI_QUAD_DOM("HIP07   ", 12, &hisi_pcie_ops),
+
+#define THUNDER_PEM_RES(addr, node) \
+	DEFINE_RES_MEM((addr) + ((u64) (node) << 44), 0x39 * SZ_16M)
+#define THUNDER_PEM_QUIRK(rev, node) \
+	{ "CAVIUM", "THUNDERX", rev, 4 + (10 * (node)), MCFG_BUS_ANY,	    \
+	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x88001f000000UL, node) },  \
+	{ "CAVIUM", "THUNDERX", rev, 5 + (10 * (node)), MCFG_BUS_ANY,	    \
+	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x884057000000UL, node) },  \
+	{ "CAVIUM", "THUNDERX", rev, 6 + (10 * (node)), MCFG_BUS_ANY,	    \
+	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x88808f000000UL, node) },  \
+	{ "CAVIUM", "THUNDERX", rev, 7 + (10 * (node)), MCFG_BUS_ANY,	    \
+	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x89001f000000UL, node) },  \
+	{ "CAVIUM", "THUNDERX", rev, 8 + (10 * (node)), MCFG_BUS_ANY,	    \
+	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x894057000000UL, node) },  \
+	{ "CAVIUM", "THUNDERX", rev, 9 + (10 * (node)), MCFG_BUS_ANY,	    \
+	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x89808f000000UL, node) }
+	/* SoC pass2.x */
+	THUNDER_PEM_QUIRK(1, 0),
+	THUNDER_PEM_QUIRK(1, 1),
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index d7e7c0a827c3..1239a8e63368 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -240,7 +240,8 @@ config PCIE_QCOM
 
 config PCI_HOST_THUNDER_PEM
 	bool "Cavium Thunder PCIe controller to off-chip devices"
-	depends on OF && ARM64
+	depends on ARM64
+	depends on OF || (ACPI && PCI_QUIRKS)
 	select PCI_HOST_COMMON
 	help
 	  Say Y here if you want PCIe support for CN88XX Cavium Thunder SoCs.
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 64845f0d6138..97e6bfc55772 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
 obj-$(CONFIG_ARM64) += pcie-hisi.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
 obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
-obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
+obj-$(CONFIG_ARM64) += pci-thunder-pem.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
 obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
 obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
index c3276eede82a..af722eb0ca75 100644
--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -18,8 +18,12 @@
 #include <linux/init.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
+#include <linux/pci-acpi.h>
 #include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
+#include "../pci.h"
+
+#if defined(CONFIG_PCI_HOST_THUNDER_PEM) || (defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS))
 
 #define PEM_CFG_WR 0x28
 #define PEM_CFG_RD 0x30
@@ -313,6 +317,43 @@ static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg,
 	return 0;
 }
 
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+
+static int thunder_pem_acpi_init(struct pci_config_window *cfg)
+{
+	struct device *dev = cfg->parent;
+	struct acpi_device *adev = to_acpi_device(dev);
+	struct acpi_pci_root *root = acpi_driver_data(adev);
+	struct resource *res_pem;
+	int ret;
+
+	res_pem = devm_kzalloc(&adev->dev, sizeof(*res_pem), GFP_KERNEL);
+	if (!res_pem)
+		return -ENOMEM;
+
+	ret = acpi_get_rc_resources(dev, "THRX0002", root->segment, res_pem);
+	if (ret) {
+		dev_err(dev, "can't get rc base address\n");
+		return ret;
+	}
+
+	return thunder_pem_init(dev, cfg, res_pem);
+}
+
+struct pci_ecam_ops thunder_pem_ecam_ops = {
+	.bus_shift	= 24,
+	.init		= thunder_pem_acpi_init,
+	.pci_ops	= {
+		.map_bus	= pci_ecam_map_bus,
+		.read		= thunder_pem_config_read,
+		.write		= thunder_pem_config_write,
+	}
+};
+
+#endif
+
+#ifdef CONFIG_PCI_HOST_THUNDER_PEM
+
 static int thunder_pem_platform_init(struct pci_config_window *cfg)
 {
 	struct device *dev = cfg->parent;
@@ -364,3 +405,6 @@ static struct platform_driver thunder_pem_driver = {
 	.probe = thunder_pem_probe,
 };
 builtin_platform_driver(thunder_pem_driver);
+
+#endif
+#endif
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index bdacbc883a22..e88d7db74200 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -62,6 +62,7 @@ extern struct pci_ecam_ops pci_generic_ecam_ops;
 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 extern struct pci_ecam_ops pci_32b_ops;		/* 32-bit accesses only */
 extern struct pci_ecam_ops hisi_pcie_ops;	/* HiSilicon */
+extern struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 2.x */
 #endif
 
 #ifdef CONFIG_PCI_HOST_GENERIC
-- 
cgit v1.2.3


From 648d93fc77da4f655cf13108417f33c91d745e2c Mon Sep 17 00:00:00 2001
From: Tomasz Nowicki <tn@semihalf.com>
Date: Wed, 30 Nov 2016 23:16:34 -0600
Subject: PCI: Add MCFG quirks for Cavium ThunderX pass1.x host controller

ThunderX pass1.x requires to emulate the EA headers for on-chip devices
hence it has to use custom pci_thunder_ecam_ops for accessing PCI config
space (pci-thunder-ecam.c). Add new entries to MCFG quirk array where it
can be applied while probing ACPI based PCI host controller.

ThunderX pass1.x is using the same way for accessing off-chip devices
(so-called PEM) as silicon pass-2.x so we need to add PEM quirk entries
too.

Quirk is considered for ThunderX silicon pass1.x only which is identified
via MCFG revision 2.

ThunderX pass 1.x requires the following accessors:

  NUMA node 0 PCI segments  0- 3: pci_thunder_ecam_ops (MCFG quirk)
  NUMA node 0 PCI segments  4- 9: thunder_pem_ecam_ops (MCFG quirk)
  NUMA node 1 PCI segments 10-13: pci_thunder_ecam_ops (MCFG quirk)
  NUMA node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk)

[bhelgaas: change Makefile/ifdefs so quirk doesn't depend on
CONFIG_PCI_HOST_THUNDER_ECAM]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/acpi/pci_mcfg.c             | 15 +++++++++++++++
 drivers/pci/host/Kconfig            |  3 ++-
 drivers/pci/host/Makefile           |  2 +-
 drivers/pci/host/pci-thunder-ecam.c |  9 ++++++++-
 include/linux/pci-ecam.h            |  3 ++-
 5 files changed, 28 insertions(+), 4 deletions(-)

(limited to 'include')

diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index 17cbb07ce16c..1cfe65d87adf 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -93,6 +93,21 @@ static struct mcfg_fixup mcfg_quirks[] = {
 	/* SoC pass2.x */
 	THUNDER_PEM_QUIRK(1, 0),
 	THUNDER_PEM_QUIRK(1, 1),
+
+#define THUNDER_ECAM_QUIRK(rev, seg)					\
+	{ "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY,			\
+	&pci_thunder_ecam_ops }
+	/* SoC pass1.x */
+	THUNDER_PEM_QUIRK(2, 0),	/* off-chip devices */
+	THUNDER_PEM_QUIRK(2, 1),	/* off-chip devices */
+	THUNDER_ECAM_QUIRK(2,  0),
+	THUNDER_ECAM_QUIRK(2,  1),
+	THUNDER_ECAM_QUIRK(2,  2),
+	THUNDER_ECAM_QUIRK(2,  3),
+	THUNDER_ECAM_QUIRK(2, 10),
+	THUNDER_ECAM_QUIRK(2, 11),
+	THUNDER_ECAM_QUIRK(2, 12),
+	THUNDER_ECAM_QUIRK(2, 13),
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 1239a8e63368..c983892e56a0 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -248,7 +248,8 @@ config PCI_HOST_THUNDER_PEM
 
 config PCI_HOST_THUNDER_ECAM
 	bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon"
-	depends on OF && ARM64
+	depends on ARM64
+	depends on OF || (ACPI && PCI_QUIRKS)
 	select PCI_HOST_COMMON
 	help
 	  Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 97e6bfc55772..639494a55c51 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
 obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
 obj-$(CONFIG_ARM64) += pcie-hisi.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
-obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
+obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
 obj-$(CONFIG_ARM64) += pci-thunder-pem.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
 obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
diff --git a/drivers/pci/host/pci-thunder-ecam.c b/drivers/pci/host/pci-thunder-ecam.c
index d50a3dc2d8db..3f54a43bbbea 100644
--- a/drivers/pci/host/pci-thunder-ecam.c
+++ b/drivers/pci/host/pci-thunder-ecam.c
@@ -14,6 +14,8 @@
 #include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
 
+#if defined(CONFIG_PCI_HOST_THUNDER_ECAM) || (defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS))
+
 static void set_val(u32 v, int where, int size, u32 *val)
 {
 	int shift = (where & 3) * 8;
@@ -346,7 +348,7 @@ static int thunder_ecam_config_write(struct pci_bus *bus, unsigned int devfn,
 	return pci_generic_config_write(bus, devfn, where, size, val);
 }
 
-static struct pci_ecam_ops pci_thunder_ecam_ops = {
+struct pci_ecam_ops pci_thunder_ecam_ops = {
 	.bus_shift	= 20,
 	.pci_ops	= {
 		.map_bus        = pci_ecam_map_bus,
@@ -355,6 +357,8 @@ static struct pci_ecam_ops pci_thunder_ecam_ops = {
 	}
 };
 
+#ifdef CONFIG_PCI_HOST_THUNDER_ECAM
+
 static const struct of_device_id thunder_ecam_of_match[] = {
 	{ .compatible = "cavium,pci-host-thunder-ecam" },
 	{ },
@@ -373,3 +377,6 @@ static struct platform_driver thunder_ecam_driver = {
 	.probe = thunder_ecam_probe,
 };
 builtin_platform_driver(thunder_ecam_driver);
+
+#endif
+#endif
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index e88d7db74200..00eb8eb774e2 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -62,7 +62,8 @@ extern struct pci_ecam_ops pci_generic_ecam_ops;
 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 extern struct pci_ecam_ops pci_32b_ops;		/* 32-bit accesses only */
 extern struct pci_ecam_ops hisi_pcie_ops;	/* HiSilicon */
-extern struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 2.x */
+extern struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 1.x & 2.x */
+extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */
 #endif
 
 #ifdef CONFIG_PCI_HOST_GENERIC
-- 
cgit v1.2.3


From c5d4603961009c39de94725213d8b5420f110f9e Mon Sep 17 00:00:00 2001
From: Duc Dang <dhdang@apm.com>
Date: Thu, 1 Dec 2016 18:27:07 -0800
Subject: PCI: Add MCFG quirks for X-Gene host controller

PCIe controllers in X-Gene SoCs are not ECAM compliant: software needs to
configure additional controller's register to address device at
bus:dev:function.

Add a quirk to discover controller MMIO register space and configure
controller registers to select and address the target secondary device.

The quirk will only be applied for X-Gene PCIe MCFG table with
OEM revison 1, 2, 3 or 4 (PCIe controller v1 and v2 on X-Gene SoCs).

Tested-by: Jon Masters <jcm@redhat.com>
Signed-off-by: Duc Dang <dhdang@apm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/acpi/pci_mcfg.c      |  25 +++++++++
 drivers/pci/host/Kconfig     |   4 +-
 drivers/pci/host/Makefile    |   2 +-
 drivers/pci/host/pci-xgene.c | 126 ++++++++++++++++++++++++++++++++++++++++---
 include/linux/pci-ecam.h     |   2 +
 5 files changed, 149 insertions(+), 10 deletions(-)

(limited to 'include')

diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index 1cfe65d87adf..a6a4ceaa6cc3 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -108,6 +108,31 @@ static struct mcfg_fixup mcfg_quirks[] = {
 	THUNDER_ECAM_QUIRK(2, 11),
 	THUNDER_ECAM_QUIRK(2, 12),
 	THUNDER_ECAM_QUIRK(2, 13),
+
+#define XGENE_V1_ECAM_MCFG(rev, seg) \
+	{"APM   ", "XGENE   ", rev, seg, MCFG_BUS_ANY, \
+		&xgene_v1_pcie_ecam_ops }
+#define XGENE_V2_ECAM_MCFG(rev, seg) \
+	{"APM   ", "XGENE   ", rev, seg, MCFG_BUS_ANY, \
+		&xgene_v2_pcie_ecam_ops }
+	/* X-Gene SoC with v1 PCIe controller */
+	XGENE_V1_ECAM_MCFG(1, 0),
+	XGENE_V1_ECAM_MCFG(1, 1),
+	XGENE_V1_ECAM_MCFG(1, 2),
+	XGENE_V1_ECAM_MCFG(1, 3),
+	XGENE_V1_ECAM_MCFG(1, 4),
+	XGENE_V1_ECAM_MCFG(2, 0),
+	XGENE_V1_ECAM_MCFG(2, 1),
+	XGENE_V1_ECAM_MCFG(2, 2),
+	XGENE_V1_ECAM_MCFG(2, 3),
+	XGENE_V1_ECAM_MCFG(2, 4),
+	/* X-Gene SoC with v2.1 PCIe controller */
+	XGENE_V2_ECAM_MCFG(3, 0),
+	XGENE_V2_ECAM_MCFG(3, 1),
+	/* X-Gene SoC with v2.2 PCIe controller */
+	XGENE_V2_ECAM_MCFG(4, 0),
+	XGENE_V2_ECAM_MCFG(4, 1),
+	XGENE_V2_ECAM_MCFG(4, 2),
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index c983892e56a0..1fb55182ccaf 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -133,8 +133,8 @@ config PCIE_XILINX
 
 config PCI_XGENE
 	bool "X-Gene PCIe controller"
-	depends on ARCH_XGENE
-	depends on OF
+	depends on ARM64
+	depends on OF || (ACPI && PCI_QUIRKS)
 	select PCIEPORTBUS
 	help
 	  Say Y here if you want internal PCI support on APM X-Gene SoC.
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 639494a55c51..6cc84b4f3a4d 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
 obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
 obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
 obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
-obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
+obj-$(CONFIG_ARM64) += pci-xgene.o
 obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
 obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
 obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
index 1de23d74783f..7c3b54b9eb17 100644
--- a/drivers/pci/host/pci-xgene.c
+++ b/drivers/pci/host/pci-xgene.c
@@ -27,6 +27,8 @@
 #include <linux/of_irq.h>
 #include <linux/of_pci.h>
 #include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
@@ -64,7 +66,9 @@
 /* PCIe IP version */
 #define XGENE_PCIE_IP_VER_UNKN		0
 #define XGENE_PCIE_IP_VER_1		1
+#define XGENE_PCIE_IP_VER_2		2
 
+#if defined(CONFIG_PCI_XGENE) || (defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS))
 struct xgene_pcie_port {
 	struct device_node	*node;
 	struct device		*dev;
@@ -91,13 +95,24 @@ static inline u32 pcie_bar_low_val(u32 addr, u32 flags)
 	return (addr & PCI_BASE_ADDRESS_MEM_MASK) | flags;
 }
 
+static inline struct xgene_pcie_port *pcie_bus_to_port(struct pci_bus *bus)
+{
+	struct pci_config_window *cfg;
+
+	if (acpi_disabled)
+		return (struct xgene_pcie_port *)(bus->sysdata);
+
+	cfg = bus->sysdata;
+	return (struct xgene_pcie_port *)(cfg->priv);
+}
+
 /*
  * When the address bit [17:16] is 2'b01, the Configuration access will be
  * treated as Type 1 and it will be forwarded to external PCIe device.
  */
 static void __iomem *xgene_pcie_get_cfg_base(struct pci_bus *bus)
 {
-	struct xgene_pcie_port *port = bus->sysdata;
+	struct xgene_pcie_port *port = pcie_bus_to_port(bus);
 
 	if (bus->number >= (bus->primary + 1))
 		return port->cfg_base + AXI_EP_CFG_ACCESS;
@@ -111,7 +126,7 @@ static void __iomem *xgene_pcie_get_cfg_base(struct pci_bus *bus)
  */
 static void xgene_pcie_set_rtdid_reg(struct pci_bus *bus, uint devfn)
 {
-	struct xgene_pcie_port *port = bus->sysdata;
+	struct xgene_pcie_port *port = pcie_bus_to_port(bus);
 	unsigned int b, d, f;
 	u32 rtdid_val = 0;
 
@@ -158,7 +173,7 @@ static void __iomem *xgene_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
 static int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
 				    int where, int size, u32 *val)
 {
-	struct xgene_pcie_port *port = bus->sysdata;
+	struct xgene_pcie_port *port = pcie_bus_to_port(bus);
 
 	if (pci_generic_config_read32(bus, devfn, where & ~0x3, 4, val) !=
 	    PCIBIOS_SUCCESSFUL)
@@ -182,13 +197,103 @@ static int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
 
 	return PCIBIOS_SUCCESSFUL;
 }
+#endif
 
-static struct pci_ops xgene_pcie_ops = {
-	.map_bus = xgene_pcie_map_bus,
-	.read = xgene_pcie_config_read32,
-	.write = pci_generic_config_write32,
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+static int xgene_get_csr_resource(struct acpi_device *adev,
+				  struct resource *res)
+{
+	struct device *dev = &adev->dev;
+	struct resource_entry *entry;
+	struct list_head list;
+	unsigned long flags;
+	int ret;
+
+	INIT_LIST_HEAD(&list);
+	flags = IORESOURCE_MEM;
+	ret = acpi_dev_get_resources(adev, &list,
+				     acpi_dev_filter_resource_type_cb,
+				     (void *) flags);
+	if (ret < 0) {
+		dev_err(dev, "failed to parse _CRS method, error code %d\n",
+			ret);
+		return ret;
+	}
+
+	if (ret == 0) {
+		dev_err(dev, "no IO and memory resources present in _CRS\n");
+		return -EINVAL;
+	}
+
+	entry = list_first_entry(&list, struct resource_entry, node);
+	*res = *entry->res;
+	acpi_dev_free_resource_list(&list);
+	return 0;
+}
+
+static int xgene_pcie_ecam_init(struct pci_config_window *cfg, u32 ipversion)
+{
+	struct device *dev = cfg->parent;
+	struct acpi_device *adev = to_acpi_device(dev);
+	struct xgene_pcie_port *port;
+	struct resource csr;
+	int ret;
+
+	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	ret = xgene_get_csr_resource(adev, &csr);
+	if (ret) {
+		dev_err(dev, "can't get CSR resource\n");
+		kfree(port);
+		return ret;
+	}
+	port->csr_base = devm_ioremap_resource(dev, &csr);
+	if (IS_ERR(port->csr_base)) {
+		kfree(port);
+		return -ENOMEM;
+	}
+
+	port->cfg_base = cfg->win;
+	port->version = ipversion;
+
+	cfg->priv = port;
+	return 0;
+}
+
+static int xgene_v1_pcie_ecam_init(struct pci_config_window *cfg)
+{
+	return xgene_pcie_ecam_init(cfg, XGENE_PCIE_IP_VER_1);
+}
+
+struct pci_ecam_ops xgene_v1_pcie_ecam_ops = {
+	.bus_shift      = 16,
+	.init           = xgene_v1_pcie_ecam_init,
+	.pci_ops        = {
+		.map_bus        = xgene_pcie_map_bus,
+		.read           = xgene_pcie_config_read32,
+		.write          = pci_generic_config_write,
+	}
+};
+
+static int xgene_v2_pcie_ecam_init(struct pci_config_window *cfg)
+{
+	return xgene_pcie_ecam_init(cfg, XGENE_PCIE_IP_VER_2);
+}
+
+struct pci_ecam_ops xgene_v2_pcie_ecam_ops = {
+	.bus_shift      = 16,
+	.init           = xgene_v2_pcie_ecam_init,
+	.pci_ops        = {
+		.map_bus        = xgene_pcie_map_bus,
+		.read           = xgene_pcie_config_read32,
+		.write          = pci_generic_config_write,
+	}
 };
+#endif
 
+#if defined(CONFIG_PCI_XGENE)
 static u64 xgene_pcie_set_ib_mask(struct xgene_pcie_port *port, u32 addr,
 				  u32 flags, u64 size)
 {
@@ -521,6 +626,12 @@ static int xgene_pcie_setup(struct xgene_pcie_port *port,
 	return 0;
 }
 
+static struct pci_ops xgene_pcie_ops = {
+	.map_bus = xgene_pcie_map_bus,
+	.read = xgene_pcie_config_read32,
+	.write = pci_generic_config_write32,
+};
+
 static int xgene_pcie_probe_bridge(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -591,3 +702,4 @@ static struct platform_driver xgene_pcie_driver = {
 	.probe = xgene_pcie_probe_bridge,
 };
 builtin_platform_driver(xgene_pcie_driver);
+#endif
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index 00eb8eb774e2..f0d2b9451270 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -64,6 +64,8 @@ extern struct pci_ecam_ops pci_32b_ops;		/* 32-bit accesses only */
 extern struct pci_ecam_ops hisi_pcie_ops;	/* HiSilicon */
 extern struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 1.x & 2.x */
 extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */
+extern struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 */
+extern struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
 #endif
 
 #ifdef CONFIG_PCI_HOST_GENERIC
-- 
cgit v1.2.3


From 37d6a0a6f4700ad3ae7bbf8db38b4557e97b3fe4 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 25 Nov 2016 11:57:09 +0100
Subject: PCI: Add pci_register_host_bridge() interface

Make the existing pci_host_bridge structure a proper device that is usable
by PCI host drivers in a more standard way. In addition to the existing
pci_scan_bus(), pci_scan_root_bus(), pci_scan_root_bus_msi(), and
pci_create_root_bus() interfaces, this unfortunately means having to add
yet another interface doing basically the same thing, and add some extra
code in the initial step.

However, this time it's more likely to be extensible enough that we won't
have to do another one again in the future, and we should be able to reduce
code much more as a result.

The main idea is to pull the allocation of 'struct pci_host_bridge' out of
the registration, and let individual host drivers and architecture code
fill the members before calling the registration function.

There are a number of things we can do based on this:

* Use a single memory allocation for the driver-specific structure
  and the generic PCI host bridge
* consolidate the contents of driver-specific structures by moving
  them into pci_host_bridge
* Add a consistent interface for removing a PCI host bridge again
  when unloading a host driver module
* Replace the architecture specific __weak pcibios_*() functions with
  callbacks in a pci_host_bridge device
* Move common boilerplate code from host drivers into the generic
  function, based on contents of the structure
* Extend pci_host_bridge with additional members when needed without
  having to add arguments to pci_scan_*().
* Move members of struct pci_bus into pci_host_bridge to avoid
  having lots of identical copies.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
---
 drivers/pci/probe.c | 238 +++++++++++++++++++++++++++++++---------------------
 include/linux/pci.h |   4 +
 2 files changed, 145 insertions(+), 97 deletions(-)

(limited to 'include')

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index ab002671fa60..4853c8fbd701 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -521,7 +521,7 @@ static void pci_release_host_bridge_dev(struct device *dev)
 	kfree(bridge);
 }
 
-static struct pci_host_bridge *pci_alloc_host_bridge(struct pci_bus *b)
+static struct pci_host_bridge *pci_alloc_host_bridge(void)
 {
 	struct pci_host_bridge *bridge;
 
@@ -530,7 +530,7 @@ static struct pci_host_bridge *pci_alloc_host_bridge(struct pci_bus *b)
 		return NULL;
 
 	INIT_LIST_HEAD(&bridge->windows);
-	bridge->bus = b;
+
 	return bridge;
 }
 
@@ -717,6 +717,122 @@ static void pci_set_bus_msi_domain(struct pci_bus *bus)
 	dev_set_msi_domain(&bus->dev, d);
 }
 
+static int pci_register_host_bridge(struct pci_host_bridge *bridge)
+{
+	struct device *parent = bridge->dev.parent;
+	struct resource_entry *window, *n;
+	struct pci_bus *bus, *b;
+	resource_size_t offset;
+	LIST_HEAD(resources);
+	struct resource *res;
+	char addr[64], *fmt;
+	const char *name;
+	int err;
+
+	bus = pci_alloc_bus(NULL);
+	if (!bus)
+		return -ENOMEM;
+
+	bridge->bus = bus;
+
+	/* temporarily move resources off the list */
+	list_splice_init(&bridge->windows, &resources);
+	bus->sysdata = bridge->sysdata;
+	bus->msi = bridge->msi;
+	bus->ops = bridge->ops;
+	bus->number = bus->busn_res.start = bridge->busnr;
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+	bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
+#endif
+
+	b = pci_find_bus(pci_domain_nr(bus), bridge->busnr);
+	if (b) {
+		/* If we already got to this bus through a different bridge, ignore it */
+		dev_dbg(&b->dev, "bus already known\n");
+		err = -EEXIST;
+		goto free;
+	}
+
+	dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(bus),
+		     bridge->busnr);
+
+	err = pcibios_root_bridge_prepare(bridge);
+	if (err)
+		goto free;
+
+	err = device_register(&bridge->dev);
+	if (err)
+		put_device(&bridge->dev);
+
+	bus->bridge = get_device(&bridge->dev);
+	device_enable_async_suspend(bus->bridge);
+	pci_set_bus_of_node(bus);
+	pci_set_bus_msi_domain(bus);
+
+	if (!parent)
+		set_dev_node(bus->bridge, pcibus_to_node(bus));
+
+	bus->dev.class = &pcibus_class;
+	bus->dev.parent = bus->bridge;
+
+	dev_set_name(&bus->dev, "%04x:%02x", pci_domain_nr(bus), bus->number);
+	name = dev_name(&bus->dev);
+
+	err = device_register(&bus->dev);
+	if (err)
+		goto unregister;
+
+	pcibios_add_bus(bus);
+
+	/* Create legacy_io and legacy_mem files for this bus */
+	pci_create_legacy_files(bus);
+
+	if (parent)
+		dev_info(parent, "PCI host bridge to bus %s\n", name);
+	else
+		pr_info("PCI host bridge to bus %s\n", name);
+
+	/* Add initial resources to the bus */
+	resource_list_for_each_entry_safe(window, n, &resources) {
+		list_move_tail(&window->node, &bridge->windows);
+		offset = window->offset;
+		res = window->res;
+
+		if (res->flags & IORESOURCE_BUS)
+			pci_bus_insert_busn_res(bus, bus->number, res->end);
+		else
+			pci_bus_add_resource(bus, res, 0);
+
+		if (offset) {
+			if (resource_type(res) == IORESOURCE_IO)
+				fmt = " (bus address [%#06llx-%#06llx])";
+			else
+				fmt = " (bus address [%#010llx-%#010llx])";
+
+			snprintf(addr, sizeof(addr), fmt,
+				 (unsigned long long)(res->start - offset),
+				 (unsigned long long)(res->end - offset));
+		} else
+			addr[0] = '\0';
+
+		dev_info(&bus->dev, "root bus resource %pR%s\n", res, addr);
+	}
+
+	down_write(&pci_bus_sem);
+	list_add_tail(&bus->node, &pci_root_buses);
+	up_write(&pci_bus_sem);
+
+	return 0;
+
+unregister:
+	put_device(&bridge->dev);
+	device_unregister(&bridge->dev);
+
+free:
+	kfree(bus);
+	return err;
+}
+
 static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 					   struct pci_dev *bridge, int busnr)
 {
@@ -2130,113 +2246,43 @@ void __weak pcibios_remove_bus(struct pci_bus *bus)
 {
 }
 
-struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
-		struct pci_ops *ops, void *sysdata, struct list_head *resources)
+static struct pci_bus *pci_create_root_bus_msi(struct device *parent,
+		int bus, struct pci_ops *ops, void *sysdata,
+		struct list_head *resources, struct msi_controller *msi)
 {
 	int error;
 	struct pci_host_bridge *bridge;
-	struct pci_bus *b, *b2;
-	struct resource_entry *window, *n;
-	struct resource *res;
-	resource_size_t offset;
-	char bus_addr[64];
-	char *fmt;
-
-	b = pci_alloc_bus(NULL);
-	if (!b)
-		return NULL;
 
-	b->sysdata = sysdata;
-	b->ops = ops;
-	b->number = b->busn_res.start = bus;
-#ifdef CONFIG_PCI_DOMAINS_GENERIC
-	b->domain_nr = pci_bus_find_domain_nr(b, parent);
-#endif
-	b2 = pci_find_bus(pci_domain_nr(b), bus);
-	if (b2) {
-		/* If we already got to this bus through a different bridge, ignore it */
-		dev_dbg(&b2->dev, "bus already known\n");
-		goto err_out;
-	}
-
-	bridge = pci_alloc_host_bridge(b);
+	bridge = pci_alloc_host_bridge();
 	if (!bridge)
-		goto err_out;
+		return NULL;
 
 	bridge->dev.parent = parent;
 	bridge->dev.release = pci_release_host_bridge_dev;
-	dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(b), bus);
-	error = pcibios_root_bridge_prepare(bridge);
-	if (error) {
-		kfree(bridge);
-		goto err_out;
-	}
-
-	error = device_register(&bridge->dev);
-	if (error) {
-		put_device(&bridge->dev);
-		goto err_out;
-	}
-	b->bridge = get_device(&bridge->dev);
-	device_enable_async_suspend(b->bridge);
-	pci_set_bus_of_node(b);
-	pci_set_bus_msi_domain(b);
 
-	if (!parent)
-		set_dev_node(b->bridge, pcibus_to_node(b));
-
-	b->dev.class = &pcibus_class;
-	b->dev.parent = b->bridge;
-	dev_set_name(&b->dev, "%04x:%02x", pci_domain_nr(b), bus);
-	error = device_register(&b->dev);
-	if (error)
-		goto class_dev_reg_err;
+	list_splice_init(resources, &bridge->windows);
+	bridge->sysdata = sysdata;
+	bridge->busnr = bus;
+	bridge->ops = ops;
+	bridge->msi = msi;
 
-	pcibios_add_bus(b);
-
-	/* Create legacy_io and legacy_mem files for this bus */
-	pci_create_legacy_files(b);
-
-	if (parent)
-		dev_info(parent, "PCI host bridge to bus %s\n", dev_name(&b->dev));
-	else
-		printk(KERN_INFO "PCI host bridge to bus %s\n", dev_name(&b->dev));
-
-	/* Add initial resources to the bus */
-	resource_list_for_each_entry_safe(window, n, resources) {
-		list_move_tail(&window->node, &bridge->windows);
-		res = window->res;
-		offset = window->offset;
-		if (res->flags & IORESOURCE_BUS)
-			pci_bus_insert_busn_res(b, bus, res->end);
-		else
-			pci_bus_add_resource(b, res, 0);
-		if (offset) {
-			if (resource_type(res) == IORESOURCE_IO)
-				fmt = " (bus address [%#06llx-%#06llx])";
-			else
-				fmt = " (bus address [%#010llx-%#010llx])";
-			snprintf(bus_addr, sizeof(bus_addr), fmt,
-				 (unsigned long long) (res->start - offset),
-				 (unsigned long long) (res->end - offset));
-		} else
-			bus_addr[0] = '\0';
-		dev_info(&b->dev, "root bus resource %pR%s\n", res, bus_addr);
-	}
+	error = pci_register_host_bridge(bridge);
+	if (error < 0)
+		goto err_out;
 
-	down_write(&pci_bus_sem);
-	list_add_tail(&b->node, &pci_root_buses);
-	up_write(&pci_bus_sem);
+	return bridge->bus;
 
-	return b;
-
-class_dev_reg_err:
-	put_device(&bridge->dev);
-	device_unregister(&bridge->dev);
 err_out:
-	kfree(b);
+	kfree(bridge);
 	return NULL;
 }
+
+struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
+		struct pci_ops *ops, void *sysdata, struct list_head *resources)
+{
+	return pci_create_root_bus_msi(parent, bus, ops, sysdata, resources,
+				       NULL);
+}
 EXPORT_SYMBOL_GPL(pci_create_root_bus);
 
 int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max)
@@ -2317,12 +2363,10 @@ struct pci_bus *pci_scan_root_bus_msi(struct device *parent, int bus,
 			break;
 		}
 
-	b = pci_create_root_bus(parent, bus, ops, sysdata, resources);
+	b = pci_create_root_bus_msi(parent, bus, ops, sysdata, resources, msi);
 	if (!b)
 		return NULL;
 
-	b->msi = msi;
-
 	if (!found) {
 		dev_info(&b->dev,
 		 "No busn resource found for root bus, will use [bus %02x-ff]\n",
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 0e49f70dbd9b..f79634612fbf 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -420,9 +420,13 @@ static inline int pci_channel_offline(struct pci_dev *pdev)
 struct pci_host_bridge {
 	struct device dev;
 	struct pci_bus *bus;		/* root bus */
+	struct pci_ops *ops;
+	void *sysdata;
+	int busnr;
 	struct list_head windows;	/* resource_entry */
 	void (*release_fn)(struct pci_host_bridge *);
 	void *release_data;
+	struct msi_controller *msi;
 	unsigned int ignore_reset_delay:1;	/* for entire hierarchy */
 	/* Resource alignment requirements */
 	resource_size_t (*align_resource)(struct pci_dev *dev,
-- 
cgit v1.2.3


From 5909406598d9fab58be860b72dff9409bff11653 Mon Sep 17 00:00:00 2001
From: Thierry Reding <treding@nvidia.com>
Date: Fri, 25 Nov 2016 11:57:10 +0100
Subject: PCI: Allow driver-specific data in host bridge

Provide a way to allocate driver-specific data along with a PCI host bridge
structure. The bridge's ->private field points to this data.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
---
 drivers/pci/probe.c |  6 +++---
 include/linux/pci.h | 11 +++++++++++
 2 files changed, 14 insertions(+), 3 deletions(-)

(limited to 'include')

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 4853c8fbd701..cf9cb6f30782 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -521,11 +521,11 @@ static void pci_release_host_bridge_dev(struct device *dev)
 	kfree(bridge);
 }
 
-static struct pci_host_bridge *pci_alloc_host_bridge(void)
+static struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
 {
 	struct pci_host_bridge *bridge;
 
-	bridge = kzalloc(sizeof(*bridge), GFP_KERNEL);
+	bridge = kzalloc(sizeof(*bridge) + priv, GFP_KERNEL);
 	if (!bridge)
 		return NULL;
 
@@ -2253,7 +2253,7 @@ static struct pci_bus *pci_create_root_bus_msi(struct device *parent,
 	int error;
 	struct pci_host_bridge *bridge;
 
-	bridge = pci_alloc_host_bridge();
+	bridge = pci_alloc_host_bridge(0);
 	if (!bridge)
 		return NULL;
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f79634612fbf..beacb17e81fb 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -434,10 +434,21 @@ struct pci_host_bridge {
 			resource_size_t start,
 			resource_size_t size,
 			resource_size_t align);
+	unsigned long private[0] ____cacheline_aligned;
 };
 
 #define	to_pci_host_bridge(n) container_of(n, struct pci_host_bridge, dev)
 
+static inline void *pci_host_bridge_priv(struct pci_host_bridge *bridge)
+{
+	return (void *)bridge->private;
+}
+
+static inline struct pci_host_bridge *pci_host_bridge_from_priv(void *priv)
+{
+	return container_of(priv, struct pci_host_bridge, private);
+}
+
 struct pci_host_bridge *pci_find_host_bridge(struct pci_bus *bus);
 
 void pci_set_host_bridge_release(struct pci_host_bridge *bridge,
-- 
cgit v1.2.3


From a52d1443bba1db98907521414727eee22ae8c380 Mon Sep 17 00:00:00 2001
From: Thierry Reding <treding@nvidia.com>
Date: Fri, 25 Nov 2016 11:57:11 +0100
Subject: PCI: Export host bridge registration interface

Allow PCI host bridge drivers to use the new host bridge interfaces to
register their host bridge.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
---
 drivers/pci/probe.c | 6 ++++--
 include/linux/pci.h | 2 ++
 2 files changed, 6 insertions(+), 2 deletions(-)

(limited to 'include')

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index cf9cb6f30782..f85ecb595c30 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -521,7 +521,7 @@ static void pci_release_host_bridge_dev(struct device *dev)
 	kfree(bridge);
 }
 
-static struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
+struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
 {
 	struct pci_host_bridge *bridge;
 
@@ -533,6 +533,7 @@ static struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
 
 	return bridge;
 }
+EXPORT_SYMBOL(pci_alloc_host_bridge);
 
 static const unsigned char pcix_bus_speed[] = {
 	PCI_SPEED_UNKNOWN,		/* 0 */
@@ -717,7 +718,7 @@ static void pci_set_bus_msi_domain(struct pci_bus *bus)
 	dev_set_msi_domain(&bus->dev, d);
 }
 
-static int pci_register_host_bridge(struct pci_host_bridge *bridge)
+int pci_register_host_bridge(struct pci_host_bridge *bridge)
 {
 	struct device *parent = bridge->dev.parent;
 	struct resource_entry *window, *n;
@@ -832,6 +833,7 @@ free:
 	kfree(bus);
 	return err;
 }
+EXPORT_SYMBOL(pci_register_host_bridge);
 
 static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 					   struct pci_dev *bridge, int busnr)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index beacb17e81fb..aa5e8af16cfc 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -449,6 +449,8 @@ static inline struct pci_host_bridge *pci_host_bridge_from_priv(void *priv)
 	return container_of(priv, struct pci_host_bridge, private);
 }
 
+struct pci_host_bridge *pci_alloc_host_bridge(size_t priv);
+int pci_register_host_bridge(struct pci_host_bridge *bridge);
 struct pci_host_bridge *pci_find_host_bridge(struct pci_bus *bus);
 
 void pci_set_host_bridge_release(struct pci_host_bridge *bridge,
-- 
cgit v1.2.3


From cc10385b6fde3e5d3a3edaabf10a4e211ee8fe72 Mon Sep 17 00:00:00 2001
From: Wang Sheng-Hui <shhuiw@foxmail.com>
Date: Thu, 22 Sep 2016 09:05:46 +0800
Subject: PCI: Move config space size macros to pci_regs.h

Move PCI configuration space size macros (PCI_CFG_SPACE_SIZE and
PCI_CFG_SPACE_EXP_SIZE) from drivers/pci/pci.h to
include/uapi/linux/pci_regs.h so they can be used by more drivers and
eliminate duplicate definitions.

[bhelgaas: Expand comment to include PCI-X details]
Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/pci.h                  | 3 ---
 drivers/vfio/pci/vfio_pci_config.c | 2 --
 include/uapi/linux/pci_regs.h      | 8 ++++++++
 3 files changed, 8 insertions(+), 5 deletions(-)

(limited to 'include')

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 451856210e18..9cbcf1dd740b 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -1,9 +1,6 @@
 #ifndef DRIVERS_PCI_H
 #define DRIVERS_PCI_H
 
-#define PCI_CFG_SPACE_SIZE	256
-#define PCI_CFG_SPACE_EXP_SIZE	4096
-
 #define PCI_FIND_CAP_TTL	48
 
 extern const unsigned char pcie_link_speed[];
diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
index 65d4a3015542..871af74fc4ce 100644
--- a/drivers/vfio/pci/vfio_pci_config.c
+++ b/drivers/vfio/pci/vfio_pci_config.c
@@ -31,8 +31,6 @@
 
 #include "vfio_pci_private.h"
 
-#define PCI_CFG_SPACE_SIZE	256
-
 /* Fake capability ID for standard config space */
 #define PCI_CAP_ID_BASIC	0
 
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index e5a2e68b2236..174d1147081b 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -22,6 +22,14 @@
 #ifndef LINUX_PCI_REGS_H
 #define LINUX_PCI_REGS_H
 
+/*
+ * Conventional PCI and PCI-X Mode 1 devices have 256 bytes of
+ * configuration space.  PCI-X Mode 2 and PCIe devices have 4096 bytes of
+ * configuration space.
+ */
+#define PCI_CFG_SPACE_SIZE	256
+#define PCI_CFG_SPACE_EXP_SIZE	4096
+
 /*
  * Under PCI, each device has 256 bytes of configuration address space,
  * of which the first 64 bytes are standardized as follows:
-- 
cgit v1.2.3