From ca889e8ad3af9f1dfeb827356bc9839fb20f32be Mon Sep 17 00:00:00 2001 From: Dennis Dalessandro Date: Wed, 6 Jan 2016 10:02:41 -0800 Subject: IB/rdmavt: Add queue pair data structure to rdmavt Add queue pair data structure as well as supporting structures to rdmavt. Reviewed-by: Ira Weiny Reviewed-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- include/rdma/rdma_vt.h | 233 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 233 insertions(+) (limited to 'include/rdma/rdma_vt.h') diff --git a/include/rdma/rdma_vt.h b/include/rdma/rdma_vt.h index f232e39a5d69..9baa7f04e8d0 100644 --- a/include/rdma/rdma_vt.h +++ b/include/rdma/rdma_vt.h @@ -105,6 +105,239 @@ struct rvt_lkey_table { /* End Memmory Region */ +/* + * Things needed for the Queue Pair definition. Like the MR stuff above the + * following should probably get moved to qp.h once drivers stop trying to make + * and manipulate thier own QPs. For the few instnaces where a driver may need + * to look into a queue pair there should be a pointer to a driver priavte data + * structure that they can look at. + */ + +/* + * These keep track of the copy progress within a memory region. + * Used by the verbs layer. + */ +struct rvt_sge { + struct rvt_mregion *mr; + void *vaddr; /* kernel virtual address of segment */ + u32 sge_length; /* length of the SGE */ + u32 length; /* remaining length of the segment */ + u16 m; /* current index: mr->map[m] */ + u16 n; /* current index: mr->map[m]->segs[n] */ +}; + +/* + * Send work request queue entry. + * The size of the sg_list is determined when the QP is created and stored + * in qp->s_max_sge. + */ +struct rvt_swqe { + union { + struct ib_send_wr wr; /* don't use wr.sg_list */ + struct ib_ud_wr ud_wr; + struct ib_reg_wr reg_wr; + struct ib_rdma_wr rdma_wr; + struct ib_atomic_wr atomic_wr; + }; + u32 psn; /* first packet sequence number */ + u32 lpsn; /* last packet sequence number */ + u32 ssn; /* send sequence number */ + u32 length; /* total length of data in sg_list */ + struct rvt_sge sg_list[0]; +}; + +/* + * Receive work request queue entry. + * The size of the sg_list is determined when the QP (or SRQ) is created + * and stored in qp->r_rq.max_sge (or srq->rq.max_sge). + */ +struct rvt_rwqe { + u64 wr_id; + u8 num_sge; + struct ib_sge sg_list[0]; +}; + +/* + * This structure is used to contain the head pointer, tail pointer, + * and receive work queue entries as a single memory allocation so + * it can be mmap'ed into user space. + * Note that the wq array elements are variable size so you can't + * just index into the array to get the N'th element; + * use get_rwqe_ptr() instead. + */ +struct rvt_rwq { + u32 head; /* new work requests posted to the head */ + u32 tail; /* receives pull requests from here. */ + struct rvt_rwqe wq[0]; +}; + +struct rvt_rq { + struct rvt_rwq *wq; + u32 size; /* size of RWQE array */ + u8 max_sge; + /* protect changes in this struct */ + spinlock_t lock ____cacheline_aligned_in_smp; +}; + +/* + * This structure is used by rvt_mmap() to validate an offset + * when an mmap() request is made. The vm_area_struct then uses + * this as its vm_private_data. + */ +struct rvt_mmap_info { + struct list_head pending_mmaps; + struct ib_ucontext *context; + void *obj; + __u64 offset; + struct kref ref; + unsigned size; +}; + +#define RVT_MAX_RDMA_ATOMIC 16 + +/* + * This structure holds the information that the send tasklet needs + * to send a RDMA read response or atomic operation. + */ +struct rvt_ack_entry { + u8 opcode; + u8 sent; + u32 psn; + u32 lpsn; + union { + struct rvt_sge rdma_sge; + u64 atomic_data; + }; +}; + +struct rvt_sge_state { + struct rvt_sge *sg_list; /* next SGE to be used if any */ + struct rvt_sge sge; /* progress state for the current SGE */ + u32 total_len; + u8 num_sge; +}; + +/* + * Variables prefixed with s_ are for the requester (sender). + * Variables prefixed with r_ are for the responder (receiver). + * Variables prefixed with ack_ are for responder replies. + * + * Common variables are protected by both r_rq.lock and s_lock in that order + * which only happens in modify_qp() or changing the QP 'state'. + */ +struct rvt_qp { + struct ib_qp ibqp; + void *priv; /* Driver private data */ + /* read mostly fields above and below */ + struct ib_ah_attr remote_ah_attr; + struct ib_ah_attr alt_ah_attr; + struct rvt_qp __rcu *next; /* link list for QPN hash table */ + struct rvt_swqe *s_wq; /* send work queue */ + struct rvt_mmap_info *ip; + + unsigned long timeout_jiffies; /* computed from timeout */ + + enum ib_mtu path_mtu; + int srate_mbps; /* s_srate (below) converted to Mbit/s */ + u32 remote_qpn; + u32 pmtu; /* decoded from path_mtu */ + u32 qkey; /* QKEY for this QP (for UD or RD) */ + u32 s_size; /* send work queue size */ + u32 s_rnr_timeout; /* number of milliseconds for RNR timeout */ + u32 s_ahgpsn; /* set to the psn in the copy of the header */ + + u8 state; /* QP state */ + u8 allowed_ops; /* high order bits of allowed opcodes */ + u8 qp_access_flags; + u8 alt_timeout; /* Alternate path timeout for this QP */ + u8 timeout; /* Timeout for this QP */ + u8 s_srate; + u8 s_mig_state; + u8 port_num; + u8 s_pkey_index; /* PKEY index to use */ + u8 s_alt_pkey_index; /* Alternate path PKEY index to use */ + u8 r_max_rd_atomic; /* max number of RDMA read/atomic to receive */ + u8 s_max_rd_atomic; /* max number of RDMA read/atomic to send */ + u8 s_retry_cnt; /* number of times to retry */ + u8 s_rnr_retry_cnt; + u8 r_min_rnr_timer; /* retry timeout value for RNR NAKs */ + u8 s_max_sge; /* size of s_wq->sg_list */ + u8 s_draining; + + /* start of read/write fields */ + atomic_t refcount ____cacheline_aligned_in_smp; + wait_queue_head_t wait; + + struct rvt_ack_entry s_ack_queue[RVT_MAX_RDMA_ATOMIC + 1] + ____cacheline_aligned_in_smp; + struct rvt_sge_state s_rdma_read_sge; + + spinlock_t r_lock ____cacheline_aligned_in_smp; /* used for APM */ + unsigned long r_aflags; + u64 r_wr_id; /* ID for current receive WQE */ + u32 r_ack_psn; /* PSN for next ACK or atomic ACK */ + u32 r_len; /* total length of r_sge */ + u32 r_rcv_len; /* receive data len processed */ + u32 r_psn; /* expected rcv packet sequence number */ + u32 r_msn; /* message sequence number */ + + u8 r_state; /* opcode of last packet received */ + u8 r_flags; + u8 r_head_ack_queue; /* index into s_ack_queue[] */ + + struct list_head rspwait; /* link for waiting to respond */ + + struct rvt_sge_state r_sge; /* current receive data */ + struct rvt_rq r_rq; /* receive work queue */ + + spinlock_t s_lock ____cacheline_aligned_in_smp; + struct rvt_sge_state *s_cur_sge; + u32 s_flags; + struct rvt_swqe *s_wqe; + struct rvt_sge_state s_sge; /* current send request data */ + struct rvt_mregion *s_rdma_mr; + struct sdma_engine *s_sde; /* current sde */ + u32 s_cur_size; /* size of send packet in bytes */ + u32 s_len; /* total length of s_sge */ + u32 s_rdma_read_len; /* total length of s_rdma_read_sge */ + u32 s_next_psn; /* PSN for next request */ + u32 s_last_psn; /* last response PSN processed */ + u32 s_sending_psn; /* lowest PSN that is being sent */ + u32 s_sending_hpsn; /* highest PSN that is being sent */ + u32 s_psn; /* current packet sequence number */ + u32 s_ack_rdma_psn; /* PSN for sending RDMA read responses */ + u32 s_ack_psn; /* PSN for acking sends and RDMA writes */ + u32 s_head; /* new entries added here */ + u32 s_tail; /* next entry to process */ + u32 s_cur; /* current work queue entry */ + u32 s_acked; /* last un-ACK'ed entry */ + u32 s_last; /* last completed entry */ + u32 s_ssn; /* SSN of tail entry */ + u32 s_lsn; /* limit sequence number (credit) */ + u16 s_hdrwords; /* size of s_hdr in 32 bit words */ + u16 s_rdma_ack_cnt; + s8 s_ahgidx; + u8 s_state; /* opcode of last packet sent */ + u8 s_ack_state; /* opcode of packet to ACK */ + u8 s_nak_state; /* non-zero if NAK is pending */ + u8 r_nak_state; /* non-zero if NAK is pending */ + u8 s_retry; /* requester retry counter */ + u8 s_rnr_retry; /* requester RNR retry counter */ + u8 s_num_rd_atomic; /* number of RDMA read/atomic pending */ + u8 s_tail_ack_queue; /* index into s_ack_queue[] */ + + struct rvt_sge_state s_ack_rdma_sge; + struct timer_list s_timer; + + /* + * This sge list MUST be last. Do not add anything below here. + */ + struct rvt_sge r_sg_list[0] /* verified SGEs */ + ____cacheline_aligned_in_smp; +}; + +/* End QP section */ + /* * Things that are driver specific, module parameters in hfi1 and qib */ -- cgit v1.2.3