From 817cee767523769cbc5ac94e439cde0c21752cbc Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Sun, 19 May 2013 14:23:57 +0300 Subject: mac80211: track AP's beacon rate and give it to the driver Track the AP's beacon rate in the scan BSS data and in the interface configuration to let the drivers know which rate the AP is using. This information may be used by drivers, in our case to let the firmware optimise beacon RX. Signed-off-by: Alexander Bondar Signed-off-by: Johannes Berg --- include/net/mac80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a405a7a9775c..5b7a3dadadde 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -305,6 +305,7 @@ enum ieee80211_rssi_event { * @basic_rates: bitmap of basic rates, each bit stands for an * index into the rate table configured by the driver in * the current band. + * @beacon_rate: associated AP's beacon TX rate * @mcast_rate: per-band multicast rate index + 1 (0: disabled) * @bssid: The BSSID for this BSS * @enable_beacon: whether beaconing should be enabled or not @@ -352,6 +353,7 @@ struct ieee80211_bss_conf { u32 sync_device_ts; u8 sync_dtim_count; u32 basic_rates; + struct ieee80211_rate *beacon_rate; int mcast_rate[IEEE80211_NUM_BANDS]; u16 ht_operation_mode; s32 cqm_rssi_thold; -- cgit v1.2.3