From 58d083192825c5fbd46fa0b1ff4d1ecc9118b692 Mon Sep 17 00:00:00 2001
From: Jesper Nilsson <jespern@stork.se.axis.com>
Date: Thu, 29 Nov 2007 17:21:59 +0100
Subject: CRIS v32: Add hardware dependent include files and defconfigs for
 ETRAX FS and ARTPEC-3 chips.

The header files describe the hardware registers available in both
these chips, note that most of this documentation is automatically
generated from the hardware implementation.
---
 include/asm-cris/arch-v32/mach-a3/startup.inc | 60 +++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 include/asm-cris/arch-v32/mach-a3/startup.inc

(limited to 'include/asm-cris/arch-v32/mach-a3/startup.inc')

diff --git a/include/asm-cris/arch-v32/mach-a3/startup.inc b/include/asm-cris/arch-v32/mach-a3/startup.inc
new file mode 100644
index 000000000000..2f23e5e16f4a
--- /dev/null
+++ b/include/asm-cris/arch-v32/mach-a3/startup.inc
@@ -0,0 +1,60 @@
+#include <hwregs/asm/reg_map_asm.h>
+#include <hwregs/asm/gio_defs_asm.h>
+#include <hwregs/asm/pio_defs_asm.h>
+#include <hwregs/asm/clkgen_defs_asm.h>
+#include <hwregs/asm/pinmux_defs_asm.h>
+
+	.macro GIO_INIT
+	move.d	CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0
+	move.d	REG_ADDR(gio, regi_gio, rw_pa_dout), $r1
+	move.d	$r0, [$r1]
+
+	move.d	CONFIG_ETRAX_DEF_GIO_PA_OE, $r0
+	move.d	REG_ADDR(gio, regi_gio, rw_pa_oe), $r1
+	move.d	$r0, [$r1]
+
+	move.d	CONFIG_ETRAX_DEF_GIO_PB_OUT, $r0
+	move.d	REG_ADDR(gio, regi_gio, rw_pb_dout), $r1
+	move.d	$r0, [$r1]
+
+	move.d	CONFIG_ETRAX_DEF_GIO_PB_OE, $r0
+	move.d	REG_ADDR(gio, regi_gio, rw_pb_oe), $r1
+	move.d	$r0, [$r1]
+
+	move.d	CONFIG_ETRAX_DEF_GIO_PC_OUT, $r0
+	move.d	REG_ADDR(gio, regi_gio, rw_pc_dout), $r1
+	move.d	$r0, [$r1]
+
+	move.d	CONFIG_ETRAX_DEF_GIO_PC_OE, $r0
+	move.d	REG_ADDR(gio, regi_gio, rw_pc_oe), $r1
+	move.d	$r0, [$r1]
+
+	move.d	0xFFFFFFFF, $r0
+	move.d	REG_ADDR(pinmux, regi_pinmux, rw_gio_pa), $r1
+	move.d	$r0, [$r1]
+	move.d	REG_ADDR(pinmux, regi_pinmux, rw_gio_pb), $r1
+	move.d	$r0, [$r1]
+	move.d	REG_ADDR(pinmux, regi_pinmux, rw_gio_pc), $r1
+	move.d	$r0, [$r1]
+	.endm
+
+	.macro START_CLOCKS
+	move.d REG_ADDR(clkgen, regi_clkgen, rw_clk_ctrl), $r1
+	move.d [$r1], $r0
+	or.d REG_STATE(clkgen, rw_clk_ctrl, cpu, yes) | \
+	     REG_STATE(clkgen, rw_clk_ctrl, ddr2, yes) | \
+	     REG_STATE(clkgen, rw_clk_ctrl, memarb_bar_ddr, yes), $r0
+	move.d $r0, [$r1]
+	.endm
+
+	.macro SETUP_WAIT_STATES
+	move.d REG_ADDR(pio, regi_pio, rw_ce0_cfg), $r0
+	move.d CONFIG_ETRAX_PIO_CE0_CFG, $r1
+	move.d $r1, [$r0]
+	move.d REG_ADDR(pio, regi_pio, rw_ce1_cfg), $r0
+	move.d CONFIG_ETRAX_PIO_CE1_CFG, $r1
+	move.d $r1, [$r0]
+	move.d REG_ADDR(pio, regi_pio, rw_ce2_cfg), $r0
+	move.d CONFIG_ETRAX_PIO_CE2_CFG, $r1
+	move.d $r1, [$r0]
+	.endm
-- 
cgit v1.2.3