From bb0eb217c980d50c45f3e793b4dcc70ab9ee820d Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 12 Aug 2008 12:40:50 +0300 Subject: [MTD] Define and use MTD_FAIL_ADDR_UNKNOWN instead of 0xffffffff Signed-off-by: Adrian Hunter Signed-off-by: David Woodhouse --- fs/jffs2/erase.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'fs') diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c index dddb2a6c9e2c..259461b910af 100644 --- a/fs/jffs2/erase.c +++ b/fs/jffs2/erase.c @@ -68,7 +68,7 @@ static void jffs2_erase_block(struct jffs2_sb_info *c, instr->len = c->sector_size; instr->callback = jffs2_erase_callback; instr->priv = (unsigned long)(&instr[1]); - instr->fail_addr = 0xffffffff; + instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; ((struct erase_priv_struct *)instr->priv)->jeb = jeb; ((struct erase_priv_struct *)instr->priv)->c = c; @@ -175,7 +175,7 @@ static void jffs2_erase_failed(struct jffs2_sb_info *c, struct jffs2_eraseblock { /* For NAND, if the failure did not occur at the device level for a specific physical page, don't bother updating the bad block table. */ - if (jffs2_cleanmarker_oob(c) && (bad_offset != 0xffffffff)) { + if (jffs2_cleanmarker_oob(c) && (bad_offset != MTD_FAIL_ADDR_UNKNOWN)) { /* We had a device-level failure to erase. Let's see if we've failed too many times. */ if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) { -- cgit v1.2.3 From bde86fec7c822b6009d3cfefc20b76b8d34716af Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 14 Aug 2008 11:57:45 +0300 Subject: [JFFS2] Correct symlink name too long error code Signed-off-by: Adrian Hunter Signed-off-by: David Woodhouse --- fs/jffs2/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'fs') diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c index cd219ef55254..b1aaae823a52 100644 --- a/fs/jffs2/dir.c +++ b/fs/jffs2/dir.c @@ -311,7 +311,7 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char /* FIXME: If you care. We'd need to use frags for the target if it grows much more than this */ if (targetlen > 254) - return -EINVAL; + return -ENAMETOOLONG; ri = jffs2_alloc_raw_inode(); -- cgit v1.2.3 From 75caf6b5acc6b895df9bdd36db631220e1096e9f Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 18 Aug 2008 16:23:53 +0100 Subject: [JFFS2] Fill in f_fsid field in jffs2_statfs() Signed-off-by: David Woodhouse --- fs/jffs2/fs.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'fs') diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c index 086c43830221..89e9b735d8df 100644 --- a/fs/jffs2/fs.c +++ b/fs/jffs2/fs.c @@ -207,6 +207,8 @@ int jffs2_statfs(struct dentry *dentry, struct kstatfs *buf) buf->f_files = 0; buf->f_ffree = 0; buf->f_namelen = JFFS2_MAX_NAME_LEN; + buf->f_fsid.val[0] = JFFS2_SUPER_MAGIC; + buf->f_fsid.val[1] = c->mtd->index; spin_lock(&c->erase_completion_lock); avail = c->dirty_size + c->free_size; -- cgit v1.2.3 From 31db6e9ea1dbdcf66b8227b4f7035dee1b1dd8c0 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 29 Aug 2008 07:19:50 +0400 Subject: [JFFS2] Move JFFS2 config options out of fs/Kconfig Signed-off-by: Alexey Dobriyan Signed-off-by: David Woodhouse --- fs/Kconfig | 190 +------------------------------------------------------ fs/jffs2/Kconfig | 188 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 189 insertions(+), 189 deletions(-) create mode 100644 fs/jffs2/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index d3873583360b..5831f9c38841 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1136,195 +1136,7 @@ config EFS_FS To compile the EFS file system support as a module, choose M here: the module will be called efs. -config JFFS2_FS - tristate "Journalling Flash File System v2 (JFFS2) support" - select CRC32 - depends on MTD - help - JFFS2 is the second generation of the Journalling Flash File System - for use on diskless embedded devices. It provides improved wear - levelling, compression and support for hard links. You cannot use - this on normal block devices, only on 'MTD' devices. - - Further information on the design and implementation of JFFS2 is - available at . - -config JFFS2_FS_DEBUG - int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)" - depends on JFFS2_FS - default "0" - help - This controls the amount of debugging messages produced by the JFFS2 - code. Set it to zero for use in production systems. For evaluation, - testing and debugging, it's advisable to set it to one. This will - enable a few assertions and will print debugging messages at the - KERN_DEBUG loglevel, where they won't normally be visible. Level 2 - is unlikely to be useful - it enables extra debugging in certain - areas which at one point needed debugging, but when the bugs were - located and fixed, the detailed messages were relegated to level 2. - - If reporting bugs, please try to have available a full dump of the - messages at debug level 1 while the misbehaviour was occurring. - -config JFFS2_FS_WRITEBUFFER - bool "JFFS2 write-buffering support" - depends on JFFS2_FS - default y - help - This enables the write-buffering support in JFFS2. - - This functionality is required to support JFFS2 on the following - types of flash devices: - - NAND flash - - NOR flash with transparent ECC - - DataFlash - -config JFFS2_FS_WBUF_VERIFY - bool "Verify JFFS2 write-buffer reads" - depends on JFFS2_FS_WRITEBUFFER - default n - help - This causes JFFS2 to read back every page written through the - write-buffer, and check for errors. - -config JFFS2_SUMMARY - bool "JFFS2 summary support (EXPERIMENTAL)" - depends on JFFS2_FS && EXPERIMENTAL - default n - help - This feature makes it possible to use summary information - for faster filesystem mount. - - The summary information can be inserted into a filesystem image - by the utility 'sumtool'. - - If unsure, say 'N'. - -config JFFS2_FS_XATTR - bool "JFFS2 XATTR support (EXPERIMENTAL)" - depends on JFFS2_FS && EXPERIMENTAL - default n - help - Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - for details). - - If unsure, say N. - -config JFFS2_FS_POSIX_ACL - bool "JFFS2 POSIX Access Control Lists" - depends on JFFS2_FS_XATTR - default y - select FS_POSIX_ACL - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website . - - If you don't know what Access Control Lists are, say N - -config JFFS2_FS_SECURITY - bool "JFFS2 Security Labels" - depends on JFFS2_FS_XATTR - default y - help - Security labels support alternative access control models - implemented by security modules like SELinux. This option - enables an extended attribute handler for file security - labels in the jffs2 filesystem. - - If you are not using a security module that requires using - extended attributes for file security labels, say N. - -config JFFS2_COMPRESSION_OPTIONS - bool "Advanced compression options for JFFS2" - depends on JFFS2_FS - default n - help - Enabling this option allows you to explicitly choose which - compression modules, if any, are enabled in JFFS2. Removing - compressors can mean you cannot read existing file systems, - and enabling experimental compressors can mean that you - write a file system which cannot be read by a standard kernel. - - If unsure, you should _definitely_ say 'N'. - -config JFFS2_ZLIB - bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS - select ZLIB_INFLATE - select ZLIB_DEFLATE - depends on JFFS2_FS - default y - help - Zlib is designed to be a free, general-purpose, legally unencumbered, - lossless data-compression library for use on virtually any computer - hardware and operating system. See for - further information. - - Say 'Y' if unsure. - -config JFFS2_LZO - bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS - select LZO_COMPRESS - select LZO_DECOMPRESS - depends on JFFS2_FS - default n - help - minilzo-based compression. Generally works better than Zlib. - - This feature was added in July, 2007. Say 'N' if you need - compatibility with older bootloaders or kernels. - -config JFFS2_RTIME - bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS - depends on JFFS2_FS - default y - help - Rtime does manage to recompress already-compressed data. Say 'Y' if unsure. - -config JFFS2_RUBIN - bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS - depends on JFFS2_FS - default n - help - RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure. - -choice - prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS - default JFFS2_CMODE_PRIORITY - depends on JFFS2_FS - help - You can set here the default compression mode of JFFS2 from - the available compression modes. Don't touch if unsure. - -config JFFS2_CMODE_NONE - bool "no compression" - help - Uses no compression. - -config JFFS2_CMODE_PRIORITY - bool "priority" - help - Tries the compressors in a predefined order and chooses the first - successful one. - -config JFFS2_CMODE_SIZE - bool "size (EXPERIMENTAL)" - help - Tries all compressors and chooses the one which has the smallest - result. - -config JFFS2_CMODE_FAVOURLZO - bool "Favour LZO" - help - Tries all compressors and chooses the one which has the smallest - result but gives some preference to LZO (which has faster - decompression) at the expense of size. - -endchoice - +source "fs/jffs2/Kconfig" # UBIFS File system configuration source "fs/ubifs/Kconfig" diff --git a/fs/jffs2/Kconfig b/fs/jffs2/Kconfig new file mode 100644 index 000000000000..6ae169cd8faa --- /dev/null +++ b/fs/jffs2/Kconfig @@ -0,0 +1,188 @@ +config JFFS2_FS + tristate "Journalling Flash File System v2 (JFFS2) support" + select CRC32 + depends on MTD + help + JFFS2 is the second generation of the Journalling Flash File System + for use on diskless embedded devices. It provides improved wear + levelling, compression and support for hard links. You cannot use + this on normal block devices, only on 'MTD' devices. + + Further information on the design and implementation of JFFS2 is + available at . + +config JFFS2_FS_DEBUG + int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)" + depends on JFFS2_FS + default "0" + help + This controls the amount of debugging messages produced by the JFFS2 + code. Set it to zero for use in production systems. For evaluation, + testing and debugging, it's advisable to set it to one. This will + enable a few assertions and will print debugging messages at the + KERN_DEBUG loglevel, where they won't normally be visible. Level 2 + is unlikely to be useful - it enables extra debugging in certain + areas which at one point needed debugging, but when the bugs were + located and fixed, the detailed messages were relegated to level 2. + + If reporting bugs, please try to have available a full dump of the + messages at debug level 1 while the misbehaviour was occurring. + +config JFFS2_FS_WRITEBUFFER + bool "JFFS2 write-buffering support" + depends on JFFS2_FS + default y + help + This enables the write-buffering support in JFFS2. + + This functionality is required to support JFFS2 on the following + types of flash devices: + - NAND flash + - NOR flash with transparent ECC + - DataFlash + +config JFFS2_FS_WBUF_VERIFY + bool "Verify JFFS2 write-buffer reads" + depends on JFFS2_FS_WRITEBUFFER + default n + help + This causes JFFS2 to read back every page written through the + write-buffer, and check for errors. + +config JFFS2_SUMMARY + bool "JFFS2 summary support (EXPERIMENTAL)" + depends on JFFS2_FS && EXPERIMENTAL + default n + help + This feature makes it possible to use summary information + for faster filesystem mount. + + The summary information can be inserted into a filesystem image + by the utility 'sumtool'. + + If unsure, say 'N'. + +config JFFS2_FS_XATTR + bool "JFFS2 XATTR support (EXPERIMENTAL)" + depends on JFFS2_FS && EXPERIMENTAL + default n + help + Extended attributes are name:value pairs associated with inodes by + the kernel or by users (see the attr(5) manual page, or visit + for details). + + If unsure, say N. + +config JFFS2_FS_POSIX_ACL + bool "JFFS2 POSIX Access Control Lists" + depends on JFFS2_FS_XATTR + default y + select FS_POSIX_ACL + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. + + To learn more about Access Control Lists, visit the Posix ACLs for + Linux website . + + If you don't know what Access Control Lists are, say N + +config JFFS2_FS_SECURITY + bool "JFFS2 Security Labels" + depends on JFFS2_FS_XATTR + default y + help + Security labels support alternative access control models + implemented by security modules like SELinux. This option + enables an extended attribute handler for file security + labels in the jffs2 filesystem. + + If you are not using a security module that requires using + extended attributes for file security labels, say N. + +config JFFS2_COMPRESSION_OPTIONS + bool "Advanced compression options for JFFS2" + depends on JFFS2_FS + default n + help + Enabling this option allows you to explicitly choose which + compression modules, if any, are enabled in JFFS2. Removing + compressors can mean you cannot read existing file systems, + and enabling experimental compressors can mean that you + write a file system which cannot be read by a standard kernel. + + If unsure, you should _definitely_ say 'N'. + +config JFFS2_ZLIB + bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS + select ZLIB_INFLATE + select ZLIB_DEFLATE + depends on JFFS2_FS + default y + help + Zlib is designed to be a free, general-purpose, legally unencumbered, + lossless data-compression library for use on virtually any computer + hardware and operating system. See for + further information. + + Say 'Y' if unsure. + +config JFFS2_LZO + bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS + select LZO_COMPRESS + select LZO_DECOMPRESS + depends on JFFS2_FS + default n + help + minilzo-based compression. Generally works better than Zlib. + + This feature was added in July, 2007. Say 'N' if you need + compatibility with older bootloaders or kernels. + +config JFFS2_RTIME + bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS + depends on JFFS2_FS + default y + help + Rtime does manage to recompress already-compressed data. Say 'Y' if unsure. + +config JFFS2_RUBIN + bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS + depends on JFFS2_FS + default n + help + RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure. + +choice + prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS + default JFFS2_CMODE_PRIORITY + depends on JFFS2_FS + help + You can set here the default compression mode of JFFS2 from + the available compression modes. Don't touch if unsure. + +config JFFS2_CMODE_NONE + bool "no compression" + help + Uses no compression. + +config JFFS2_CMODE_PRIORITY + bool "priority" + help + Tries the compressors in a predefined order and chooses the first + successful one. + +config JFFS2_CMODE_SIZE + bool "size (EXPERIMENTAL)" + help + Tries all compressors and chooses the one which has the smallest + result. + +config JFFS2_CMODE_FAVOURLZO + bool "Favour LZO" + help + Tries all compressors and chooses the one which has the smallest + result but gives some preference to LZO (which has faster + decompression) at the expense of size. + +endchoice -- cgit v1.2.3 From 3fc678a0e63138f56109ea31850f19b2e29c45b8 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Aug 2008 14:48:32 +0100 Subject: CRED: Wrap task credential accesses in the JFFS2 filesystem Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells Reviewed-by: James Morris Acked-by: Serge Hallyn Signed-off-by: David Woodhouse --- fs/jffs2/fs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'fs') diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c index 89e9b735d8df..249305d65d5b 100644 --- a/fs/jffs2/fs.c +++ b/fs/jffs2/fs.c @@ -442,14 +442,14 @@ struct inode *jffs2_new_inode (struct inode *dir_i, int mode, struct jffs2_raw_i memset(ri, 0, sizeof(*ri)); /* Set OS-specific defaults for new inodes */ - ri->uid = cpu_to_je16(current->fsuid); + ri->uid = cpu_to_je16(current_fsuid()); if (dir_i->i_mode & S_ISGID) { ri->gid = cpu_to_je16(dir_i->i_gid); if (S_ISDIR(mode)) mode |= S_ISGID; } else { - ri->gid = cpu_to_je16(current->fsgid); + ri->gid = cpu_to_je16(current_fsgid()); } /* POSIX ACLs have to be processed now, at least partly. -- cgit v1.2.3 From faa5c2a15e14b6a4e59fcae65dec5258e723ea9f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 17 Oct 2008 16:19:45 +0200 Subject: [JFFS2] Correct parameter names of jffs2_compress() in comments Make the parameter names of jffs2_compress() in its comments match with the actual implementation Signed-off-by: Geert Uytterhoeven Signed-off-by: David Woodhouse --- fs/jffs2/compr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'fs') diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c index 86739ee53b37..f25e70c1b51c 100644 --- a/fs/jffs2/compr.c +++ b/fs/jffs2/compr.c @@ -53,8 +53,8 @@ static int jffs2_is_best_compression(struct jffs2_compressor *this, } /* jffs2_compress: - * @data: Pointer to uncompressed data - * @cdata: Pointer to returned pointer to buffer for compressed data + * @data_in: Pointer to uncompressed data + * @cpage_out: Pointer to returned pointer to buffer for compressed data * @datalen: On entry, holds the amount of data available for compression. * On exit, expected to hold the amount of data actually compressed. * @cdatalen: On entry, holds the amount of space available for compressed -- cgit v1.2.3 From 5bf1723723487ddb0b9c9641b6559da96b27cc93 Mon Sep 17 00:00:00 2001 From: Alexander Belyakov Date: Fri, 17 Oct 2008 19:19:13 +0400 Subject: [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash After choosing new c->nextblock, don't leave the wbuf offset field occasionally pointing at the start of the next physical eraseblock. This was causing a BUG() on NOR-ECC (Sibley) flash, where we start writing after the cleanmarker. Among other this fix should cover write buffer offset adjustment after flushing the last page of an eraseblock. Signed-off-by: Alexander Belyakov Signed-off-by: David Woodhouse --- fs/jffs2/nodemgmt.c | 4 ++++ fs/jffs2/wbuf.c | 5 +---- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'fs') diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c index a9bf9603c1ba..0875b60b4bf7 100644 --- a/fs/jffs2/nodemgmt.c +++ b/fs/jffs2/nodemgmt.c @@ -261,6 +261,10 @@ static int jffs2_find_nextblock(struct jffs2_sb_info *c) jffs2_sum_reset_collected(c->summary); /* reset collected summary */ + /* adjust write buffer offset, else we get a non contiguous write bug */ + if (!(c->wbuf_ofs % c->sector_size) && !c->wbuf_len) + c->wbuf_ofs = 0xffffffff; + D1(printk(KERN_DEBUG "jffs2_find_nextblock(): new nextblock = 0x%08x\n", c->nextblock->offset)); return 0; diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c index 0e78b00035e4..d9a721e6db70 100644 --- a/fs/jffs2/wbuf.c +++ b/fs/jffs2/wbuf.c @@ -679,10 +679,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad) memset(c->wbuf,0xff,c->wbuf_pagesize); /* adjust write buffer offset, else we get a non contiguous write bug */ - if (SECTOR_ADDR(c->wbuf_ofs) == SECTOR_ADDR(c->wbuf_ofs+c->wbuf_pagesize)) - c->wbuf_ofs += c->wbuf_pagesize; - else - c->wbuf_ofs = 0xffffffff; + c->wbuf_ofs += c->wbuf_pagesize; c->wbuf_len = 0; return 0; } -- cgit v1.2.3