From aefff4915632185e286c8c94f6f5ccb939fc51d7 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 15 May 2018 09:54:33 +0100 Subject: drm/xen-front: fix spelling mistake: "conector" -> "connector" Trivial fix to spelling mistake in DRM_INFO message. Signed-off-by: Colin Ian King Reviewed-by: Oleksandr Andrushchenko Signed-off-by: Oleksandr Andrushchenko Link: https://patchwork.freedesktop.org/patch/msgid/20180515085433.8245-1-colin.king@canonical.com --- drivers/gpu/drm/xen/xen_drm_front.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xen/xen_drm_front.c b/drivers/gpu/drm/xen/xen_drm_front.c index 3345ac71b391..93bf9f092086 100644 --- a/drivers/gpu/drm/xen/xen_drm_front.c +++ b/drivers/gpu/drm/xen/xen_drm_front.c @@ -623,7 +623,7 @@ static int displback_initwait(struct xen_drm_front_info *front_info) if (ret < 0) return ret; - DRM_INFO("Have %d conector(s)\n", cfg->num_connectors); + DRM_INFO("Have %d connector(s)\n", cfg->num_connectors); /* Create event channels for all connectors and publish */ ret = xen_drm_front_evtchnl_create_all(front_info); if (ret < 0) -- cgit v1.2.3 From 3257ec797d3a8c5232389eb1952d4451e80f3931 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 17 May 2018 15:37:59 +0200 Subject: drm/vc4: plane: Expand the lower bits by repeating the higher bits The vc4 HVS uses an internal RGB888 representation of the frames, and will by default expand formats using a lower depth using zeros. This causes an issue when we try to use other compositing software such as pixman that fill the missing bits by repeating the higher significant bits. As such, we can't check the display output in a reliable way by doing a software composition and an hardware one and compare both. To prevent this, force the same behaviour so that we can do such things. Signed-off-by: Maxime Ripard Signed-off-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/20180517133759.25626-1-maxime.ripard@bootlin.com --- drivers/gpu/drm/vc4/vc4_plane.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c index 3483c05cc3d6..6e8984aee613 100644 --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c @@ -544,6 +544,7 @@ static int vc4_plane_mode_set(struct drm_plane *plane, /* Control word */ vc4_dlist_write(vc4_state, SCALER_CTL0_VALID | + VC4_SET_FIELD(SCALER_CTL0_RGBA_EXPAND_ROUND, SCALER_CTL0_RGBA_EXPAND) | (format->pixel_order << SCALER_CTL0_ORDER_SHIFT) | (format->hvs << SCALER_CTL0_PIXEL_FORMAT_SHIFT) | VC4_SET_FIELD(tiling, SCALER_CTL0_TILING) | -- cgit v1.2.3 From 50525c332b55f899fb231d786931d0b45a3f3d41 Mon Sep 17 00:00:00 2001 From: Stanislav Lisovskiy Date: Tue, 15 May 2018 16:59:27 +0300 Subject: drm: content-type property for HDMI connector MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Added content_type property to drm_connector_state in order to properly handle external HDMI TV content-type setting. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil Acked-by: Daniel Vetter Signed-off-by: Stanislav Lisovskiy Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-2-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä --- Documentation/gpu/drm-kms.rst | 6 ++ Documentation/gpu/kms-properties.csv | 1 + drivers/gpu/drm/drm_atomic.c | 4 ++ drivers/gpu/drm/drm_connector.c | 113 +++++++++++++++++++++++++++++++++++ drivers/gpu/drm/drm_edid.c | 8 +++ include/drm/drm_connector.h | 13 ++++ include/drm/drm_mode_config.h | 5 ++ include/uapi/drm/drm_mode.h | 7 +++ 8 files changed, 157 insertions(+) (limited to 'drivers') diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 1dffd1ac4cd4..e233c2626bd0 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -517,6 +517,12 @@ Standard Connector Properties .. kernel-doc:: drivers/gpu/drm/drm_connector.c :doc: standard connector properties +HDMI Specific Connector Properties +----------------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_connector.c + :doc: HDMI connector properties + Plane Composition Properties ---------------------------- diff --git a/Documentation/gpu/kms-properties.csv b/Documentation/gpu/kms-properties.csv index 07ed22ea3bd6..bfde04eddd14 100644 --- a/Documentation/gpu/kms-properties.csv +++ b/Documentation/gpu/kms-properties.csv @@ -17,6 +17,7 @@ Owner Module/Drivers,Group,Property Name,Type,Property Values,Object attached,De ,Virtual GPU,“suggested X”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an X offset for a connector ,,“suggested Y”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an Y offset for a connector ,Optional,"""aspect ratio""",ENUM,"{ ""None"", ""4:3"", ""16:9"" }",Connector,TDB +,Optional,"""content type""",ENUM,"{ ""No Data"", ""Graphics"", ""Photo"", ""Cinema"", ""Game"" }",Connector,TBD i915,Generic,"""Broadcast RGB""",ENUM,"{ ""Automatic"", ""Full"", ""Limited 16:235"" }",Connector,"When this property is set to Limited 16:235 and CTM is set, the hardware will be programmed with the result of the multiplication of CTM by the limited range matrix to ensure the pixels normaly in the range 0..1.0 are remapped to the range 16/255..235/255." ,,“audio”,ENUM,"{ ""force-dvi"", ""off"", ""auto"", ""on"" }",Connector,TBD ,SDVO-TV,“mode”,ENUM,"{ ""NTSC_M"", ""NTSC_J"", ""NTSC_443"", ""PAL_B"" } etc.",Connector,TBD diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index dc850b4b6e21..07fef42869aa 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -1270,6 +1270,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector, state->link_status = val; } else if (property == config->aspect_ratio_property) { state->picture_aspect_ratio = val; + } else if (property == config->content_type_property) { + state->content_type = val; } else if (property == connector->scaling_mode_property) { state->scaling_mode = val; } else if (property == connector->content_protection_property) { @@ -1355,6 +1357,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector, *val = state->link_status; } else if (property == config->aspect_ratio_property) { *val = state->picture_aspect_ratio; + } else if (property == config->content_type_property) { + *val = state->content_type; } else if (property == connector->scaling_mode_property) { *val = state->scaling_mode; } else if (property == connector->content_protection_property) { diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index 9b9ba5d5ec0c..002b244391f9 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -720,6 +720,14 @@ static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = { { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" }, }; +static const struct drm_prop_enum_list drm_content_type_enum_list[] = { + { DRM_MODE_CONTENT_TYPE_NO_DATA, "No Data" }, + { DRM_MODE_CONTENT_TYPE_GRAPHICS, "Graphics" }, + { DRM_MODE_CONTENT_TYPE_PHOTO, "Photo" }, + { DRM_MODE_CONTENT_TYPE_CINEMA, "Cinema" }, + { DRM_MODE_CONTENT_TYPE_GAME, "Game" }, +}; + static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = { { DRM_MODE_PANEL_ORIENTATION_NORMAL, "Normal" }, { DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, "Upside Down" }, @@ -996,6 +1004,84 @@ int drm_mode_create_dvi_i_properties(struct drm_device *dev) } EXPORT_SYMBOL(drm_mode_create_dvi_i_properties); +/** + * DOC: HDMI connector properties + * + * content type (HDMI specific): + * Indicates content type setting to be used in HDMI infoframes to indicate + * content type for the external device, so that it adjusts it's display + * settings accordingly. + * + * The value of this property can be one of the following: + * + * No Data: + * Content type is unknown + * Graphics: + * Content type is graphics + * Photo: + * Content type is photo + * Cinema: + * Content type is cinema + * Game: + * Content type is game + * + * Drivers can set up this property by calling + * drm_connector_attach_content_type_property(). Decoding to + * infoframe values is done through + * drm_hdmi_get_content_type_from_property() and + * drm_hdmi_get_itc_bit_from_property(). + */ + +/** + * drm_connector_attach_content_type_property - attach content-type property + * @connector: connector to attach content type property on. + * + * Called by a driver the first time a HDMI connector is made. + */ +int drm_connector_attach_content_type_property(struct drm_connector *connector) +{ + if (!drm_mode_create_content_type_property(connector->dev)) + drm_object_attach_property(&connector->base, + connector->dev->mode_config.content_type_property, + DRM_MODE_CONTENT_TYPE_NO_DATA); + return 0; +} +EXPORT_SYMBOL(drm_connector_attach_content_type_property); + + +/** + * drm_hdmi_avi_infoframe_content_type() - fill the HDMI AVI infoframe + * content type information, based + * on correspondent DRM property. + * @frame: HDMI AVI infoframe + * @conn_state: DRM display connector state + * + */ +void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame, + const struct drm_connector_state *conn_state) +{ + switch (conn_state->content_type) { + case DRM_MODE_CONTENT_TYPE_GRAPHICS: + frame->content_type = HDMI_CONTENT_TYPE_GRAPHICS; + break; + case DRM_MODE_CONTENT_TYPE_CINEMA: + frame->content_type = HDMI_CONTENT_TYPE_CINEMA; + break; + case DRM_MODE_CONTENT_TYPE_GAME: + frame->content_type = HDMI_CONTENT_TYPE_GAME; + break; + case DRM_MODE_CONTENT_TYPE_PHOTO: + frame->content_type = HDMI_CONTENT_TYPE_PHOTO; + break; + default: + /* Graphics is the default(0) */ + frame->content_type = HDMI_CONTENT_TYPE_GRAPHICS; + } + + frame->itc = conn_state->content_type != DRM_MODE_CONTENT_TYPE_NO_DATA; +} +EXPORT_SYMBOL(drm_hdmi_avi_infoframe_content_type); + /** * drm_create_tv_properties - create TV specific connector properties * @dev: DRM device @@ -1260,6 +1346,33 @@ int drm_mode_create_aspect_ratio_property(struct drm_device *dev) } EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property); +/** + * drm_mode_create_content_type_property - create content type property + * @dev: DRM device + * + * Called by a driver the first time it's needed, must be attached to desired + * connectors. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_mode_create_content_type_property(struct drm_device *dev) +{ + if (dev->mode_config.content_type_property) + return 0; + + dev->mode_config.content_type_property = + drm_property_create_enum(dev, 0, "content type", + drm_content_type_enum_list, + ARRAY_SIZE(drm_content_type_enum_list)); + + if (dev->mode_config.content_type_property == NULL) + return -ENOMEM; + + return 0; +} +EXPORT_SYMBOL(drm_mode_create_content_type_property); + /** * drm_mode_create_suggested_offset_properties - create suggests offset properties * @dev: DRM device diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 40e1e24f2ff0..82f1ab09169d 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -4872,6 +4872,14 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE; + /* + * As some drivers don't support atomic, we can't use connector state. + * So just initialize the frame with default values, just the same way + * as it's done with other properties here. + */ + frame->content_type = HDMI_CONTENT_TYPE_GRAPHICS; + frame->itc = 0; + /* * Populate picture aspect ratio from either * user input (if specified) or from the CEA mode list. diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 675cc3f8cf85..ee4c48218c85 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -418,6 +418,14 @@ struct drm_connector_state { */ enum hdmi_picture_aspect picture_aspect_ratio; + /** + * @content_type: Connector property to control the + * HDMI infoframe content type setting. + * The %DRM_MODE_CONTENT_TYPE_\* values much + * match the values. + */ + unsigned int content_type; + /** * @scaling_mode: Connector property to control the * upscaling, mostly used for built-in panels. @@ -1089,11 +1097,16 @@ int drm_mode_create_tv_properties(struct drm_device *dev, unsigned int num_modes, const char * const modes[]); int drm_mode_create_scaling_mode_property(struct drm_device *dev); +int drm_connector_attach_content_type_property(struct drm_connector *dev); int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, u32 scaling_mode_mask); int drm_connector_attach_content_protection_property( struct drm_connector *connector); int drm_mode_create_aspect_ratio_property(struct drm_device *dev); +int drm_mode_create_content_type_property(struct drm_device *dev); +void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame, + const struct drm_connector_state *conn_state); + int drm_mode_create_suggested_offset_properties(struct drm_device *dev); int drm_mode_connector_set_path_property(struct drm_connector *connector, diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h index 33b3a96d66d0..fb45839179dd 100644 --- a/include/drm/drm_mode_config.h +++ b/include/drm/drm_mode_config.h @@ -726,6 +726,11 @@ struct drm_mode_config { * HDMI infoframe aspect ratio setting. */ struct drm_property *aspect_ratio_property; + /** + * @content_type_property: Optional connector property to control the + * HDMI infoframe content type setting. + */ + struct drm_property *content_type_property; /** * @degamma_lut_property: Optional CRTC property to set the LUT used to * convert the framebuffer's colors to linear gamma. diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h index 4b3a1bb58e68..971c016b368c 100644 --- a/include/uapi/drm/drm_mode.h +++ b/include/uapi/drm/drm_mode.h @@ -96,6 +96,13 @@ extern "C" { #define DRM_MODE_PICTURE_ASPECT_64_27 3 #define DRM_MODE_PICTURE_ASPECT_256_135 4 +/* Content type options */ +#define DRM_MODE_CONTENT_TYPE_NO_DATA 0 +#define DRM_MODE_CONTENT_TYPE_GRAPHICS 1 +#define DRM_MODE_CONTENT_TYPE_PHOTO 2 +#define DRM_MODE_CONTENT_TYPE_CINEMA 3 +#define DRM_MODE_CONTENT_TYPE_GAME 4 + /* Aspect ratio flag bitmask (4 bits 22:19) */ #define DRM_MODE_FLAG_PIC_AR_MASK (0x0F<<19) #define DRM_MODE_FLAG_PIC_AR_NONE \ -- cgit v1.2.3 From 6553b123eae8dd117f6adb4a42e2e6ef8bff321d Mon Sep 17 00:00:00 2001 From: Stanislav Lisovskiy Date: Tue, 15 May 2018 16:59:28 +0300 Subject: i915: content-type property for HDMI connector MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Added encoding of drm content_type property from drm_connector_state within AVI infoframe in order to properly handle external HDMI TV content-type setting. This requires also manipulationg ITC bit, as stated in HDMI spec. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil Acked-by: Daniel Vetter Signed-off-by: Stanislav Lisovskiy Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-3-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä --- drivers/gpu/drm/i915/intel_atomic.c | 1 + drivers/gpu/drm/i915/intel_hdmi.c | 17 +++++++++++------ 2 files changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c index 40285d1b91b7..61ddb5871d8a 100644 --- a/drivers/gpu/drm/i915/intel_atomic.c +++ b/drivers/gpu/drm/i915/intel_atomic.c @@ -124,6 +124,7 @@ int intel_digital_connector_atomic_check(struct drm_connector *conn, if (new_conn_state->force_audio != old_conn_state->force_audio || new_conn_state->broadcast_rgb != old_conn_state->broadcast_rgb || new_conn_state->base.picture_aspect_ratio != old_conn_state->base.picture_aspect_ratio || + new_conn_state->base.content_type != old_conn_state->base.content_type || new_conn_state->base.scaling_mode != old_conn_state->base.scaling_mode) crtc_state->mode_changed = true; diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index ee929f31f7db..ea958ed0777d 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -461,7 +461,8 @@ static void intel_write_infoframe(struct drm_encoder *encoder, } static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder, - const struct intel_crtc_state *crtc_state) + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) { struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); const struct drm_display_mode *adjusted_mode = @@ -491,6 +492,9 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder, intel_hdmi->rgb_quant_range_selectable, is_hdmi2_sink); + drm_hdmi_avi_infoframe_content_type(&frame.avi, + conn_state); + /* TODO: handle pixel repetition for YCBCR420 outputs */ intel_write_infoframe(encoder, crtc_state, &frame); } @@ -586,7 +590,7 @@ static void g4x_set_infoframes(struct drm_encoder *encoder, I915_WRITE(reg, val); POSTING_READ(reg); - intel_hdmi_set_avi_infoframe(encoder, crtc_state); + intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state); intel_hdmi_set_spd_infoframe(encoder, crtc_state); intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state); } @@ -727,7 +731,7 @@ static void ibx_set_infoframes(struct drm_encoder *encoder, I915_WRITE(reg, val); POSTING_READ(reg); - intel_hdmi_set_avi_infoframe(encoder, crtc_state); + intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state); intel_hdmi_set_spd_infoframe(encoder, crtc_state); intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state); } @@ -770,7 +774,7 @@ static void cpt_set_infoframes(struct drm_encoder *encoder, I915_WRITE(reg, val); POSTING_READ(reg); - intel_hdmi_set_avi_infoframe(encoder, crtc_state); + intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state); intel_hdmi_set_spd_infoframe(encoder, crtc_state); intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state); } @@ -823,7 +827,7 @@ static void vlv_set_infoframes(struct drm_encoder *encoder, I915_WRITE(reg, val); POSTING_READ(reg); - intel_hdmi_set_avi_infoframe(encoder, crtc_state); + intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state); intel_hdmi_set_spd_infoframe(encoder, crtc_state); intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state); } @@ -856,7 +860,7 @@ static void hsw_set_infoframes(struct drm_encoder *encoder, I915_WRITE(reg, val); POSTING_READ(reg); - intel_hdmi_set_avi_infoframe(encoder, crtc_state); + intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state); intel_hdmi_set_spd_infoframe(encoder, crtc_state); intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state); } @@ -2065,6 +2069,7 @@ intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *c intel_attach_force_audio_property(connector); intel_attach_broadcast_rgb_property(connector); intel_attach_aspect_ratio_property(connector); + drm_connector_attach_content_type_property(connector); connector->state->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE; } -- cgit v1.2.3 From 38992c57c9c8425dc9cb75efe6f9b9255ea627a0 Mon Sep 17 00:00:00 2001 From: Jyri Sarha Date: Thu, 26 Apr 2018 11:06:59 +0300 Subject: drm/panel: Remove drm_panel_detach() calls from all panel drivers Remove all drm_panel_detach() calls from all panel drivers and update the kerneldoc for drm_panel_detach(). Setting the connector and drm to NULL when the DRM panel device is going away hardly serves any purpose. Usually the whole memory structure is freed right after the remove call. However, calling the detach function from the master DRM device, and setting the connector pointer to NULL, has the logic of marking the panel again as available for another DRM master to attach. The usual situation would be the same DRM master device binding again. Signed-off-by: Jyri Sarha Reviewed-by: Daniel Vetter Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/464b8d330d6b4c94cfb5aad2ca9ea7eb2c52d934.1524727888.git.jsarha@ti.com --- drivers/gpu/drm/drm_panel.c | 6 ++++++ drivers/gpu/drm/panel/panel-innolux-p079zca.c | 1 - drivers/gpu/drm/panel/panel-jdi-lt070me05000.c | 1 - drivers/gpu/drm/panel/panel-lvds.c | 1 - drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c | 1 - drivers/gpu/drm/panel/panel-seiko-43wvf1g.c | 1 - drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c | 1 - drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c | 1 - drivers/gpu/drm/panel/panel-simple.c | 1 - drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 1 - 10 files changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c index 308d442a531b..71e407574276 100644 --- a/drivers/gpu/drm/drm_panel.c +++ b/drivers/gpu/drm/drm_panel.c @@ -94,6 +94,9 @@ EXPORT_SYMBOL(drm_panel_remove); * * An error is returned if the panel is already attached to another connector. * + * When unloading, the driver should detach from the panel by calling + * drm_panel_detach(). + * * Return: 0 on success or a negative error code on failure. */ int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector) @@ -115,6 +118,9 @@ EXPORT_SYMBOL(drm_panel_attach); * Detaches a panel from the connector it is attached to. If a panel is not * attached to any connector this is effectively a no-op. * + * This function should not be called by the panel device itself. It + * is only for the drm device that called drm_panel_attach(). + * * Return: 0 on success or a negative error code on failure. */ int drm_panel_detach(struct drm_panel *panel) diff --git a/drivers/gpu/drm/panel/panel-innolux-p079zca.c b/drivers/gpu/drm/panel/panel-innolux-p079zca.c index 57df39b5c589..bb53e0850764 100644 --- a/drivers/gpu/drm/panel/panel-innolux-p079zca.c +++ b/drivers/gpu/drm/panel/panel-innolux-p079zca.c @@ -292,7 +292,6 @@ static int innolux_panel_remove(struct mipi_dsi_device *dsi) DRM_DEV_ERROR(&dsi->dev, "failed to detach from DSI host: %d\n", err); - drm_panel_detach(&innolux->base); innolux_panel_del(innolux); return 0; diff --git a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c index 0a94ab79a6c0..99caa7835e7b 100644 --- a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c +++ b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c @@ -500,7 +500,6 @@ static int jdi_panel_remove(struct mipi_dsi_device *dsi) dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); - drm_panel_detach(&jdi->base); jdi_panel_del(jdi); return 0; diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c index 5185819c5b79..8a1687887ae9 100644 --- a/drivers/gpu/drm/panel/panel-lvds.c +++ b/drivers/gpu/drm/panel/panel-lvds.c @@ -282,7 +282,6 @@ static int panel_lvds_remove(struct platform_device *pdev) { struct panel_lvds *lvds = dev_get_drvdata(&pdev->dev); - drm_panel_detach(&lvds->panel); drm_panel_remove(&lvds->panel); panel_lvds_disable(&lvds->panel); diff --git a/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c index 74a806121f80..cb4dfb98be0f 100644 --- a/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c +++ b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c @@ -299,7 +299,6 @@ static int wuxga_nt_panel_remove(struct mipi_dsi_device *dsi) if (ret < 0) dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); - drm_panel_detach(&wuxga_nt->base); wuxga_nt_panel_del(wuxga_nt); return 0; diff --git a/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c b/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c index 71c09ed436ae..75f925390551 100644 --- a/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c +++ b/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c @@ -292,7 +292,6 @@ static int seiko_panel_remove(struct platform_device *pdev) { struct seiko_panel *panel = dev_get_drvdata(&pdev->dev); - drm_panel_detach(&panel->base); drm_panel_remove(&panel->base); seiko_panel_disable(&panel->base); diff --git a/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c b/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c index 6bf8730f1a21..02fc0f5423d4 100644 --- a/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c +++ b/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c @@ -418,7 +418,6 @@ static int sharp_panel_remove(struct mipi_dsi_device *dsi) if (err < 0) dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err); - drm_panel_detach(&sharp->base); sharp_panel_del(sharp); return 0; diff --git a/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c b/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c index 494aa9b1628a..e5cae0050f52 100644 --- a/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c +++ b/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c @@ -327,7 +327,6 @@ static int sharp_nt_panel_remove(struct mipi_dsi_device *dsi) if (ret < 0) dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); - drm_panel_detach(&sharp_nt->base); sharp_nt_panel_del(sharp_nt); return 0; diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index cbf1ab404ee7..062b6b416b89 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -364,7 +364,6 @@ static int panel_simple_remove(struct device *dev) { struct panel_simple *panel = dev_get_drvdata(dev); - drm_panel_detach(&panel->base); drm_panel_remove(&panel->base); panel_simple_disable(&panel->base); diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c index 358c64ef1922..74284e5afc5d 100644 --- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c +++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c @@ -419,7 +419,6 @@ static int st7789v_remove(struct spi_device *spi) { struct st7789v *ctx = spi_get_drvdata(spi); - drm_panel_detach(&ctx->panel); drm_panel_remove(&ctx->panel); if (ctx->backlight) -- cgit v1.2.3 From 0c08754b59da5557532d946599854e6df28edc22 Mon Sep 17 00:00:00 2001 From: Jyri Sarha Date: Thu, 26 Apr 2018 11:07:00 +0300 Subject: drm/panel: Add device_link from panel device to DRM device Add device_link from panel device (supplier) to DRM device (consumer) when drm_panel_attach() is called. This patch should protect the master DRM driver if an attached panel driver unbinds while it is in use. The device_link should make sure the DRM device is unbound before the panel driver becomes unavailable. The device_link is removed when drm_panel_detach() is called. The drm_panel_detach() should be called by the consumer DRM driver, not the panel driver, otherwise both drivers are racing to delete the same link. Signed-off-by: Jyri Sarha Reviewed-by: Eric Anholt Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/b53584fd988d045c13de22d81825395b0ae0aad7.1524727888.git.jsarha@ti.com --- drivers/gpu/drm/drm_panel.c | 10 ++++++++++ include/drm/drm_panel.h | 1 + 2 files changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c index 71e407574276..965530a6f4cd 100644 --- a/drivers/gpu/drm/drm_panel.c +++ b/drivers/gpu/drm/drm_panel.c @@ -24,6 +24,7 @@ #include #include +#include #include #include @@ -104,6 +105,13 @@ int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector) if (panel->connector) return -EBUSY; + panel->link = device_link_add(connector->dev->dev, panel->dev, 0); + if (!panel->link) { + dev_err(panel->dev, "failed to link panel to %s\n", + dev_name(connector->dev->dev)); + return -EINVAL; + } + panel->connector = connector; panel->drm = connector->dev; @@ -125,6 +133,8 @@ EXPORT_SYMBOL(drm_panel_attach); */ int drm_panel_detach(struct drm_panel *panel) { + device_link_del(panel->link); + panel->connector = NULL; panel->drm = NULL; diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h index 14ac240a1f64..26a1b5fd8796 100644 --- a/include/drm/drm_panel.h +++ b/include/drm/drm_panel.h @@ -89,6 +89,7 @@ struct drm_panel { struct drm_device *drm; struct drm_connector *connector; struct device *dev; + struct device_link *link; const struct drm_panel_funcs *funcs; -- cgit v1.2.3 From d9f9565c1f7f51904a5009671595a50b8ab0462b Mon Sep 17 00:00:00 2001 From: Philippe CORNU Date: Mon, 23 Apr 2018 16:10:50 +0200 Subject: drm/panel: otm8009a: Fix backlight updates Backlight updates was not working anymore since the good implementation of the DSI low-power mode in the DSI host driver. After a longer analysis, the backlight updates in DSI video mode require the DSI high- speed mode. Note: it is important to keep the DSI low-power mode for the rest of the driver as init sequence, sleep in/out... DSI commands work in low-power mode. Signed-off-by: Philippe Cornu Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20180423141054.13128-2-philippe.cornu@st.com --- drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c index 90f1ae4af93c..0fd2e0144d2b 100644 --- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c +++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c @@ -98,6 +98,20 @@ static void otm8009a_dcs_write_buf(struct otm8009a *ctx, const void *data, DRM_WARN("mipi dsi dcs write buffer failed\n"); } +static void otm8009a_dcs_write_buf_hs(struct otm8009a *ctx, const void *data, + size_t len) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + + /* data will be sent in dsi hs mode (ie. no lpm) */ + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + otm8009a_dcs_write_buf(ctx, data, len); + + /* restore back the dsi lpm mode */ + dsi->mode_flags |= MIPI_DSI_MODE_LPM; +} + #define dcs_write_seq(ctx, seq...) \ ({ \ static const u8 d[] = { seq }; \ @@ -387,7 +401,7 @@ static int otm8009a_backlight_update_status(struct backlight_device *bd) */ data[0] = MIPI_DCS_SET_DISPLAY_BRIGHTNESS; data[1] = bd->props.brightness; - otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data)); + otm8009a_dcs_write_buf_hs(ctx, data, ARRAY_SIZE(data)); /* set Brightness Control & Backlight on */ data[1] = 0x24; @@ -399,7 +413,7 @@ static int otm8009a_backlight_update_status(struct backlight_device *bd) /* Update Brightness Control & Backlight */ data[0] = MIPI_DCS_WRITE_CONTROL_DISPLAY; - otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data)); + otm8009a_dcs_write_buf_hs(ctx, data, ARRAY_SIZE(data)); return 0; } -- cgit v1.2.3 From 36830ce4eb2b5f6fe796c457b4043160c0e1e1fe Mon Sep 17 00:00:00 2001 From: Philippe CORNU Date: Mon, 23 Apr 2018 16:10:51 +0200 Subject: drm/panel: otm8009a: Fix glitches by moving backlight enable to otm8009a_enable() The backlight 1st update was in the otm8009a_prepare() function for a bad reason: backlight was not working in video mode and the otm8009a_prepare() is in command mode for the init sequence. As the backlight is now fixed (no low-power mode), it is good to put it back in the otm8009a_enable() function, avoiding also image glitches visible on some "slow" devices. Signed-off-by: Philippe Cornu Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20180423141054.13128-3-philippe.cornu@st.com --- drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c index 0fd2e0144d2b..de4a16d5275c 100644 --- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c +++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c @@ -330,13 +330,6 @@ static int otm8009a_prepare(struct drm_panel *panel) ctx->prepared = true; - /* - * Power on the backlight. Note: end-user still controls brightness - * Note: ctx->prepared must be true before updating the backlight. - */ - ctx->bl_dev->props.power = FB_BLANK_UNBLANK; - backlight_update_status(ctx->bl_dev); - return 0; } @@ -344,6 +337,16 @@ static int otm8009a_enable(struct drm_panel *panel) { struct otm8009a *ctx = panel_to_otm8009a(panel); + if (ctx->enabled) + return 0; + + /* + * Power on the backlight. Note: end-user still controls brightness + * Note: ctx->prepared must be true before updating the backlight. + */ + ctx->bl_dev->props.power = FB_BLANK_UNBLANK; + backlight_update_status(ctx->bl_dev); + ctx->enabled = true; return 0; -- cgit v1.2.3 From 6982b943123d5867997a6d0f8b5976ac3ddb2fa6 Mon Sep 17 00:00:00 2001 From: Philippe CORNU Date: Mon, 23 Apr 2018 16:10:52 +0200 Subject: drm/panel: otm8009a: No message if probe success Remove the message in case of probe success. This comes from a suggestion followed in the recent integration of the raydium rm68200 panel. Signed-off-by: Philippe Cornu Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20180423141054.13128-4-philippe.cornu@st.com --- drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c index de4a16d5275c..4c638b7b9943 100644 --- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c +++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c @@ -14,8 +14,6 @@ #include #include