From 58ddafae2d7102d8f493840cb7aca0b4b2326b2a Mon Sep 17 00:00:00 2001
From: Rhyland Klein <rklein@nvidia.com>
Date: Tue, 24 May 2011 12:05:59 -0700
Subject: bq20z75: Add support for external notification

Adding support for external power change notification. One problem found
is that there is a lag time before the sensor will return a new status.
To ensure that we only fire off the power_supply_changed event when the
status returned from the sensor is actually different, we delay sending
the the notification, and instead poll on it looking for a change. The
amount of time to poll is configurable via platform data.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/bq20z75.c | 101 +++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 92 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/power/bq20z75.c b/drivers/power/bq20z75.c
index 506585e31a5b..e1adc0e027ac 100644
--- a/drivers/power/bq20z75.c
+++ b/drivers/power/bq20z75.c
@@ -152,6 +152,10 @@ struct bq20z75_info {
 	bool				gpio_detect;
 	bool				enable_detection;
 	int				irq;
+	int				last_state;
+	int				poll_time;
+	struct delayed_work		work;
+	int				ignore_changes;
 };
 
 static int bq20z75_read_word_data(struct i2c_client *client, u8 address)
@@ -279,6 +283,7 @@ static int bq20z75_get_battery_property(struct i2c_client *client,
 	int reg_offset, enum power_supply_property psp,
 	union power_supply_propval *val)
 {
+	struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
 	s32 ret;
 
 	ret = bq20z75_read_word_data(client,
@@ -293,15 +298,24 @@ static int bq20z75_get_battery_property(struct i2c_client *client,
 	if (ret >= bq20z75_data[reg_offset].min_value &&
 	    ret <= bq20z75_data[reg_offset].max_value) {
 		val->intval = ret;
-		if (psp == POWER_SUPPLY_PROP_STATUS) {
-			if (ret & BATTERY_FULL_CHARGED)
-				val->intval = POWER_SUPPLY_STATUS_FULL;
-			else if (ret & BATTERY_FULL_DISCHARGED)
-				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
-			else if (ret & BATTERY_DISCHARGING)
-				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-			else
-				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		if (psp != POWER_SUPPLY_PROP_STATUS)
+			return 0;
+
+		if (ret & BATTERY_FULL_CHARGED)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else if (ret & BATTERY_FULL_DISCHARGED)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		else if (ret & BATTERY_DISCHARGING)
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+
+		if (bq20z75_device->poll_time == 0)
+			bq20z75_device->last_state = val->intval;
+		else if (bq20z75_device->last_state != val->intval) {
+			cancel_delayed_work_sync(&bq20z75_device->work);
+			power_supply_changed(&bq20z75_device->power_supply);
+			bq20z75_device->poll_time = 0;
 		}
 	} else {
 		if (psp == POWER_SUPPLY_PROP_STATUS)
@@ -545,6 +559,60 @@ static irqreturn_t bq20z75_irq(int irq, void *devid)
 	return IRQ_HANDLED;
 }
 
+static void bq20z75_external_power_changed(struct power_supply *psy)
+{
+	struct bq20z75_info *bq20z75_device;
+
+	bq20z75_device = container_of(psy, struct bq20z75_info, power_supply);
+
+	if (bq20z75_device->ignore_changes > 0) {
+		bq20z75_device->ignore_changes--;
+		return;
+	}
+
+	/* cancel outstanding work */
+	cancel_delayed_work_sync(&bq20z75_device->work);
+
+	schedule_delayed_work(&bq20z75_device->work, HZ);
+	bq20z75_device->poll_time = bq20z75_device->pdata->poll_retry_count;
+}
+
+static void bq20z75_delayed_work(struct work_struct *work)
+{
+	struct bq20z75_info *bq20z75_device;
+	s32 ret;
+
+	bq20z75_device = container_of(work, struct bq20z75_info, work.work);
+
+	ret = bq20z75_read_word_data(bq20z75_device->client,
+				     bq20z75_data[REG_STATUS].addr);
+	/* if the read failed, give up on this work */
+	if (ret < 0) {
+		bq20z75_device->poll_time = 0;
+		return;
+	}
+
+	if (ret & BATTERY_FULL_CHARGED)
+		ret = POWER_SUPPLY_STATUS_FULL;
+	else if (ret & BATTERY_FULL_DISCHARGED)
+		ret = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	else if (ret & BATTERY_DISCHARGING)
+		ret = POWER_SUPPLY_STATUS_DISCHARGING;
+	else
+		ret = POWER_SUPPLY_STATUS_CHARGING;
+
+	if (bq20z75_device->last_state != ret) {
+		bq20z75_device->poll_time = 0;
+		power_supply_changed(&bq20z75_device->power_supply);
+		return;
+	}
+	if (bq20z75_device->poll_time > 0) {
+		schedule_delayed_work(&bq20z75_device->work, HZ);
+		bq20z75_device->poll_time--;
+		return;
+	}
+}
+
 static int __devinit bq20z75_probe(struct i2c_client *client,
 	const struct i2c_device_id *id)
 {
@@ -566,6 +634,13 @@ static int __devinit bq20z75_probe(struct i2c_client *client,
 	bq20z75_device->power_supply.num_properties =
 		ARRAY_SIZE(bq20z75_properties);
 	bq20z75_device->power_supply.get_property = bq20z75_get_property;
+	/* ignore first notification of external change, it is generated
+	 * from the power_supply_register call back
+	 */
+	bq20z75_device->ignore_changes = 1;
+	bq20z75_device->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
+	bq20z75_device->power_supply.external_power_changed =
+		bq20z75_external_power_changed;
 
 	if (pdata) {
 		bq20z75_device->gpio_detect =
@@ -625,6 +700,8 @@ skip_gpio:
 	dev_info(&client->dev,
 		"%s: battery gas gauge device registered\n", client->name);
 
+	INIT_DELAYED_WORK(&bq20z75_device->work, bq20z75_delayed_work);
+
 	return 0;
 
 exit_psupply:
@@ -648,6 +725,9 @@ static int __devexit bq20z75_remove(struct i2c_client *client)
 		gpio_free(bq20z75_device->pdata->battery_detect);
 
 	power_supply_unregister(&bq20z75_device->power_supply);
+
+	cancel_delayed_work_sync(&bq20z75_device->work);
+
 	kfree(bq20z75_device);
 	bq20z75_device = NULL;
 
@@ -661,6 +741,9 @@ static int bq20z75_suspend(struct i2c_client *client,
 	struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
 	s32 ret;
 
+	if (bq20z75_device->poll_time > 0)
+		cancel_delayed_work_sync(&bq20z75_device->work);
+
 	/* write to manufacturer access with sleep command */
 	ret = bq20z75_write_word_data(client,
 		bq20z75_data[REG_MANUFACTURER_DATA].addr,
-- 
cgit v1.2.3


From ee177d96e0ff497c46b2fe5c3b49e47810b5a8ca Mon Sep 17 00:00:00 2001
From: Rhyland Klein <rklein@nvidia.com>
Date: Tue, 24 May 2011 12:06:50 -0700
Subject: bq20z75: Enable detection after registering

Need to enable detection, which is also blocking the unit conversion logic
after registering the power_supply.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/bq20z75.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers')

diff --git a/drivers/power/bq20z75.c b/drivers/power/bq20z75.c
index e1adc0e027ac..9c5e5beda3a8 100644
--- a/drivers/power/bq20z75.c
+++ b/drivers/power/bq20z75.c
@@ -702,6 +702,8 @@ skip_gpio:
 
 	INIT_DELAYED_WORK(&bq20z75_device->work, bq20z75_delayed_work);
 
+	bq20z75_device->enable_detection = true;
+
 	return 0;
 
 exit_psupply:
-- 
cgit v1.2.3


From f704d45ede331204b6f393ba7cf49353fe7936a7 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 24 May 2011 18:46:02 +0800
Subject: s3c_adc_battery: Fix annotation for s3c_adc_battery_probe()

A probe() function is used at device init time rather than system init
time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/s3c_adc_battery.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/s3c_adc_battery.c
index d36c289aaef5..a675e31b4f13 100644
--- a/drivers/power/s3c_adc_battery.c
+++ b/drivers/power/s3c_adc_battery.c
@@ -266,7 +266,7 @@ static irqreturn_t s3c_adc_bat_charged(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int __init s3c_adc_bat_probe(struct platform_device *pdev)
+static int __devinit s3c_adc_bat_probe(struct platform_device *pdev)
 {
 	struct s3c_adc_client	*client;
 	struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
-- 
cgit v1.2.3


From c84cad3d0fbb09dbfb30336ab05181cdbe097634 Mon Sep 17 00:00:00 2001
From: Ken O'Brien <kernel@kenobrien.org>
Date: Sun, 29 May 2011 18:53:12 +0100
Subject: apm_power: Fix style error in macros

Two macros in the changed file contained complex expressions which
were not enclosed by parentheses.

Signed-off-by: Ken O'Brien <kernel@kenobrien.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/apm_power.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/power/apm_power.c b/drivers/power/apm_power.c
index dc628cb2e762..8a612dec9139 100644
--- a/drivers/power/apm_power.c
+++ b/drivers/power/apm_power.c
@@ -14,11 +14,11 @@
 #include <linux/apm-emulation.h>
 
 
-#define PSY_PROP(psy, prop, val) psy->get_property(psy, \
-			 POWER_SUPPLY_PROP_##prop, val)
+#define PSY_PROP(psy, prop, val) (psy->get_property(psy, \
+			 POWER_SUPPLY_PROP_##prop, val))
 
-#define _MPSY_PROP(prop, val) main_battery->get_property(main_battery, \
-							 prop, val)
+#define _MPSY_PROP(prop, val) (main_battery->get_property(main_battery, \
+							 prop, val))
 
 #define MPSY_PROP(prop, val) _MPSY_PROP(POWER_SUPPLY_PROP_##prop, val)
 
-- 
cgit v1.2.3


From d03760318edbc78b72cb7fa96bddb65263384d24 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 31 May 2011 13:30:10 +0100
Subject: wm831x_backup: Support multiple instances

If there are multiple wm831x devices in the system we need to assign
different names to the power supply devices in order to ensure we can
create the sysfs entries for them.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/wm831x_backup.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/power/wm831x_backup.c b/drivers/power/wm831x_backup.c
index 0fd130d80f5d..e648cbea1e6a 100644
--- a/drivers/power/wm831x_backup.c
+++ b/drivers/power/wm831x_backup.c
@@ -22,6 +22,7 @@
 struct wm831x_backup {
 	struct wm831x *wm831x;
 	struct power_supply backup;
+	char name[20];
 };
 
 static int wm831x_backup_read_voltage(struct wm831x *wm831x,
@@ -163,6 +164,7 @@ static enum power_supply_property wm831x_backup_props[] = {
 static __devinit int wm831x_backup_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
 	struct wm831x_backup *devdata;
 	struct power_supply *backup;
 	int ret;
@@ -182,7 +184,14 @@ static __devinit int wm831x_backup_probe(struct platform_device *pdev)
 	 */
 	wm831x_config_backup(wm831x);
 
-	backup->name = "wm831x-backup";
+	if (wm831x_pdata && wm831x_pdata->wm831x_num)
+		snprintf(devdata->name, sizeof(devdata->name),
+			 "wm831x-backup.%d", wm831x_pdata->wm831x_num);
+	else
+		snprintf(devdata->name, sizeof(devdata->name),
+			 "wm831x-backup");
+
+	backup->name = devdata->name;
 	backup->type = POWER_SUPPLY_TYPE_BATTERY;
 	backup->properties = wm831x_backup_props;
 	backup->num_properties = ARRAY_SIZE(wm831x_backup_props);
@@ -203,6 +212,7 @@ static __devexit int wm831x_backup_remove(struct platform_device *pdev)
 	struct wm831x_backup *devdata = platform_get_drvdata(pdev);
 
 	power_supply_unregister(&devdata->backup);
+	kfree(devdata->backup.name);
 	kfree(devdata);
 
 	return 0;
-- 
cgit v1.2.3


From ccf8fa2d1b4dd8660aadc830f22645781628b894 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 31 May 2011 13:30:11 +0100
Subject: wm831x_power: Support multiple instances

If there are multiple wm831x devices in the system we need to assign
different names to the power supply devices in order to ensure we can
create the sysfs entries for them.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/wm831x_power.c | 26 +++++++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c
index ddf8cf5f3204..6cc2ca6427f3 100644
--- a/drivers/power/wm831x_power.c
+++ b/drivers/power/wm831x_power.c
@@ -24,6 +24,9 @@ struct wm831x_power {
 	struct power_supply wall;
 	struct power_supply usb;
 	struct power_supply battery;
+	char wall_name[20];
+	char usb_name[20];
+	char battery_name[20];
 };
 
 static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
@@ -486,6 +489,7 @@ static irqreturn_t wm831x_pwr_src_irq(int irq, void *data)
 static __devinit int wm831x_power_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
 	struct wm831x_power *power;
 	struct power_supply *usb;
 	struct power_supply *battery;
@@ -503,12 +507,28 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev)
 	battery = &power->battery;
 	wall = &power->wall;
 
+	if (wm831x_pdata && wm831x_pdata->wm831x_num) {
+		snprintf(power->wall_name, sizeof(power->wall_name),
+			 "wm831x-wall.%d", wm831x_pdata->wm831x_num);
+		snprintf(power->battery_name, sizeof(power->wall_name),
+			 "wm831x-battery.%d", wm831x_pdata->wm831x_num);
+		snprintf(power->usb_name, sizeof(power->wall_name),
+			 "wm831x-usb.%d", wm831x_pdata->wm831x_num);
+	} else {
+		snprintf(power->wall_name, sizeof(power->wall_name),
+			 "wm831x-wall");
+		snprintf(power->battery_name, sizeof(power->wall_name),
+			 "wm831x-battery");
+		snprintf(power->usb_name, sizeof(power->wall_name),
+			 "wm831x-usb");
+	}
+
 	/* We ignore configuration failures since we can still read back
 	 * the status without enabling the charger.
 	 */
 	wm831x_config_battery(wm831x);
 
-	wall->name = "wm831x-wall";
+	wall->name = power->wall_name;
 	wall->type = POWER_SUPPLY_TYPE_MAINS;
 	wall->properties = wm831x_wall_props;
 	wall->num_properties = ARRAY_SIZE(wm831x_wall_props);
@@ -517,7 +537,7 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_kmalloc;
 
-	battery->name = "wm831x-battery";
+	battery->name = power->battery_name;
 	battery->properties = wm831x_bat_props;
 	battery->num_properties = ARRAY_SIZE(wm831x_bat_props);
 	battery->get_property = wm831x_bat_get_prop;
@@ -526,7 +546,7 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_wall;
 
-	usb->name = "wm831x-usb",
+	usb->name = power->usb_name,
 	usb->type = POWER_SUPPLY_TYPE_USB;
 	usb->properties = wm831x_usb_props;
 	usb->num_properties = ARRAY_SIZE(wm831x_usb_props);
-- 
cgit v1.2.3


From 28d48f04ead41438f14d167fe61fd179de7029f3 Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Fri, 3 Jun 2011 14:43:11 +0300
Subject: twl4030_charger: Fix warnings

Fix warnings emitted by some versions of gcc:
drivers/power/twl4030_charger.c:490: warning: overflow in implicit constant conversion
drivers/power/twl4030_charger.c:498: warning: overflow in implicit constant conversion

While at it, also fix module_param permissions and a typo in my name.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/twl4030_charger.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
index 92c16e1677bd..54b9198fa576 100644
--- a/drivers/power/twl4030_charger.c
+++ b/drivers/power/twl4030_charger.c
@@ -62,7 +62,7 @@
 #define TWL4030_MSTATEC_COMPLETE4	0x0e
 
 static bool allow_usb;
-module_param(allow_usb, bool, 1);
+module_param(allow_usb, bool, 0644);
 MODULE_PARM_DESC(allow_usb, "Allow USB charge drawing default current");
 
 struct twl4030_bci {
@@ -425,7 +425,7 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 {
 	struct twl4030_bci *bci;
 	int ret;
-	int reg;
+	u32 reg;
 
 	bci = kzalloc(sizeof(*bci), GFP_KERNEL);
 	if (bci == NULL)
@@ -486,7 +486,7 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 	}
 
 	/* Enable interrupts now. */
-	reg = ~(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 |
+	reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 |
 		TWL4030_TBATOR1 | TWL4030_BATSTS);
 	ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
 			       TWL4030_INTERRUPTS_BCIIMR1A);
@@ -495,7 +495,7 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 		goto fail_unmask_interrupts;
 	}
 
-	reg = ~(TWL4030_VBATOV | TWL4030_VBUSOV | TWL4030_ACCHGOV);
+	reg = ~(u32)(TWL4030_VBATOV | TWL4030_VBUSOV | TWL4030_ACCHGOV);
 	ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
 			       TWL4030_INTERRUPTS_BCIIMR2A);
 	if (ret < 0)
@@ -572,7 +572,7 @@ static void __exit twl4030_bci_exit(void)
 }
 module_exit(twl4030_bci_exit);
 
-MODULE_AUTHOR("Gražydas Ignotas");
+MODULE_AUTHOR("Gražvydas Ignotas");
 MODULE_DESCRIPTION("TWL4030 Battery Charger Interface driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:twl4030_bci");
-- 
cgit v1.2.3


From 7c4509b4cd1d99a1ea22ee4c1da4d3dbb9771c95 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Mon, 20 Jun 2011 23:01:14 +0200
Subject: max17042_battery: Remove obsolete cleanup for clientdata

A few new i2c-drivers came into the kernel which clear the
clientdata-pointer on exit or error. This is obsolete meanwhile,
the core will do it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/max17042_battery.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/power/max17042_battery.c b/drivers/power/max17042_battery.c
index c5c8805156cb..09f7496a6d8c 100644
--- a/drivers/power/max17042_battery.c
+++ b/drivers/power/max17042_battery.c
@@ -183,7 +183,6 @@ static int __devinit max17042_probe(struct i2c_client *client,
 	ret = power_supply_register(&client->dev, &chip->battery);
 	if (ret) {
 		dev_err(&client->dev, "failed: power supply register\n");
-		i2c_set_clientdata(client, NULL);
 		kfree(chip);
 		return ret;
 	}
@@ -202,7 +201,6 @@ static int __devexit max17042_remove(struct i2c_client *client)
 	struct max17042_chip *chip = i2c_get_clientdata(client);
 
 	power_supply_unregister(&chip->battery);
-	i2c_set_clientdata(client, NULL);
 	kfree(chip);
 	return 0;
 }
-- 
cgit v1.2.3


From 149c077b4bd746eca2eeb241e55456eb4882b259 Mon Sep 17 00:00:00 2001
From: Donggeun Kim <dg77.kim@samsung.com>
Date: Wed, 22 Jun 2011 19:40:06 +0900
Subject: power_supply: Add charger driver for MAX8997/8966

MAX8997/8966 chip is a multi-function device which includes
PMIC, RTC, Fuel Gauge, MUIC, Haptic, Flash control, and
Battery charging control.
The driver for it is located at drivers/mfd.

This patch supports battery charging control of MAX8997/8966 chip and
provides power supply class information to userspace.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/Kconfig           |   7 ++
 drivers/power/Makefile          |   1 +
 drivers/power/max8997_charger.c | 206 ++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/max8997.h     |   7 +-
 4 files changed, 220 insertions(+), 1 deletion(-)
 create mode 100644 drivers/power/max8997_charger.c

(limited to 'drivers')

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index cc019c9812c2..f4f1a31d46a3 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -228,4 +228,11 @@ config CHARGER_GPIO
 	  This driver can be build as a module. If so, the module will be
 	  called gpio-charger.
 
+config CHARGER_MAX8997
+	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
+	depends on MFD_MAX8997 && REGULATOR_MAX8997
+	help
+	  Say Y to enable support for the battery charger control sysfs and
+	  platform data of MAX8997/LP3974 PMICs.
+
 endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 8fcd93ff2353..39793ef50cd5 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -35,3 +35,4 @@ obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
 obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
 obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
 obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
+obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
diff --git a/drivers/power/max8997_charger.c b/drivers/power/max8997_charger.c
new file mode 100644
index 000000000000..7106b49b26e4
--- /dev/null
+++ b/drivers/power/max8997_charger.c
@@ -0,0 +1,206 @@
+/*
+ * max8997_charger.c - Power supply consumer driver for the Maxim 8997/8966
+ *
+ *  Copyright (C) 2011 Samsung Electronics
+ *  MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mfd/max8997-private.h>
+
+struct charger_data {
+	struct device *dev;
+	struct max8997_dev *iodev;
+	struct power_supply battery;
+};
+
+static enum power_supply_property max8997_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS, /* "FULL" or "NOT FULL" only. */
+	POWER_SUPPLY_PROP_PRESENT, /* the presence of battery */
+	POWER_SUPPLY_PROP_ONLINE, /* charger is active or not */
+};
+
+/* Note that the charger control is done by a current regulator "CHARGER" */
+static int max8997_battery_get_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		union power_supply_propval *val)
+{
+	struct charger_data *charger = container_of(psy,
+			struct charger_data, battery);
+	struct i2c_client *i2c = charger->iodev->i2c;
+	int ret;
+	u8 reg;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = 0;
+		ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, &reg);
+		if (ret)
+			return ret;
+		if ((reg & (1 << 0)) == 0x1)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = 0;
+		ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, &reg);
+		if (ret)
+			return ret;
+		if ((reg & (1 << 2)) == 0x0)
+			val->intval = 1;
+
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = 0;
+		ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, &reg);
+		if (ret)
+			return ret;
+		/* DCINOK */
+		if (reg & (1 << 1))
+			val->intval = 1;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static __devinit int max8997_battery_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct charger_data *charger;
+	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
+
+	if (!pdata)
+		return -EINVAL;
+
+	if (pdata->eoc_mA) {
+		u8 val = (pdata->eoc_mA - 50) / 10;
+		if (val < 0)
+			val = 0;
+		if (val > 0xf)
+			val = 0xf;
+
+		ret = max8997_update_reg(iodev->i2c,
+				MAX8997_REG_MBCCTRL5, val, 0xf);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Cannot use i2c bus.\n");
+			return ret;
+		}
+	}
+
+	switch (pdata->timeout) {
+	case 5:
+		ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
+				0x2 << 4, 0x7 << 4);
+		break;
+	case 6:
+		ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
+				0x3 << 4, 0x7 << 4);
+		break;
+	case 7:
+		ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
+				0x4 << 4, 0x7 << 4);
+		break;
+	case 0:
+		ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
+				0x7 << 4, 0x7 << 4);
+		break;
+	default:
+		dev_err(&pdev->dev, "incorrect timeout value (%d)\n",
+				pdata->timeout);
+		return -EINVAL;
+	}
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Cannot use i2c bus.\n");
+		return ret;
+	}
+
+	charger = kzalloc(sizeof(struct charger_data), GFP_KERNEL);
+	if (charger == NULL) {
+		dev_err(&pdev->dev, "Cannot allocate memory.\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, charger);
+
+	charger->battery.name = "max8997_pmic";
+	charger->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+	charger->battery.get_property = max8997_battery_get_property;
+	charger->battery.properties = max8997_battery_props;
+	charger->battery.num_properties = ARRAY_SIZE(max8997_battery_props);
+
+	charger->dev = &pdev->dev;
+	charger->iodev = iodev;
+
+	ret = power_supply_register(&pdev->dev, &charger->battery);
+	if (ret) {
+		dev_err(&pdev->dev, "failed: power supply register\n");
+		goto err;
+	}
+
+	return 0;
+err:
+	kfree(charger);
+	return ret;
+}
+
+static int __devexit max8997_battery_remove(struct platform_device *pdev)
+{
+	struct charger_data *charger = platform_get_drvdata(pdev);
+
+	power_supply_unregister(&charger->battery);
+	kfree(charger);
+	return 0;
+}
+
+static const struct platform_device_id max8997_battery_id[] = {
+	{ "max8997-battery", 0 },
+};
+
+static struct platform_driver max8997_battery_driver = {
+	.driver = {
+		.name = "max8997-battery",
+		.owner = THIS_MODULE,
+	},
+	.probe = max8997_battery_probe,
+	.remove = __devexit_p(max8997_battery_remove),
+	.id_table = max8997_battery_id,
+};
+
+static int __init max8997_battery_init(void)
+{
+	return platform_driver_register(&max8997_battery_driver);
+}
+subsys_initcall(max8997_battery_init);
+
+static void __exit max8997_battery_cleanup(void)
+{
+	platform_driver_unregister(&max8997_battery_driver);
+}
+module_exit(max8997_battery_cleanup);
+
+MODULE_DESCRIPTION("MAXIM 8997/8966 battery control driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index 60931d089422..0bbd13dbe336 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -107,11 +107,16 @@ struct max8997_platform_data {
 	unsigned int buck5_voltage[8];
 	bool buck5_gpiodvs;
 
+	/* ---- Charger control ---- */
+	/* eoc stands for 'end of charge' */
+	int eoc_mA; /* 50 ~ 200mA by 10mA step */
+	/* charge Full Timeout */
+	int timeout; /* 0 (no timeout), 5, 6, 7 hours */
+
 	/* MUIC: Not implemented */
 	/* HAPTIC: Not implemented */
 	/* RTC: Not implemented */
 	/* Flash: Not implemented */
-	/* Charger control: Not implemented */
 };
 
 #endif /* __LINUX_MFD_MAX8998_H */
-- 
cgit v1.2.3


From bb4ce9708785f40849f1a64931e6cc3b26171201 Mon Sep 17 00:00:00 2001
From: Donggeun Kim <dg77.kim@samsung.com>
Date: Fri, 24 Jun 2011 19:04:18 +0900
Subject: power_supply: Add charger driver for MAX8998/LP3974

This patch supports power supply APIs for MAX8998/LP3974.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/mfd/max8998.c           |   2 +
 drivers/power/Kconfig           |   7 ++
 drivers/power/Makefile          |   1 +
 drivers/power/max8998_charger.c | 218 ++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/max8998.h     |  12 +++
 5 files changed, 240 insertions(+)
 create mode 100644 drivers/power/max8998_charger.c

(limited to 'drivers')

diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
index 9ec7570f5b81..de4096aee248 100644
--- a/drivers/mfd/max8998.c
+++ b/drivers/mfd/max8998.c
@@ -39,6 +39,8 @@ static struct mfd_cell max8998_devs[] = {
 		.name = "max8998-pmic",
 	}, {
 		.name = "max8998-rtc",
+	}, {
+		.name = "max8998-battery",
 	},
 };
 
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index f4f1a31d46a3..fddc392369ed 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -235,4 +235,11 @@ config CHARGER_MAX8997
 	  Say Y to enable support for the battery charger control sysfs and
 	  platform data of MAX8997/LP3974 PMICs.
 
+config CHARGER_MAX8998
+	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
+	depends on MFD_MAX8998 && REGULATOR_MAX8998
+	help
+	  Say Y to enable support for the battery charger control sysfs and
+	  platform data of MAX8998/LP3974 PMICs.
+
 endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 39793ef50cd5..a18e899b1f46 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -36,3 +36,4 @@ obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
 obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
 obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
+obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
diff --git a/drivers/power/max8998_charger.c b/drivers/power/max8998_charger.c
new file mode 100644
index 000000000000..cc21fa2120be
--- /dev/null
+++ b/drivers/power/max8998_charger.c
@@ -0,0 +1,218 @@
+/*
+ * max8998_charger.c - Power supply consumer driver for the Maxim 8998/LP3974
+ *
+ *  Copyright (C) 2009-2010 Samsung Electronics
+ *  MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max8998.h>
+#include <linux/mfd/max8998-private.h>
+
+struct max8998_battery_data {
+	struct device *dev;
+	struct max8998_dev *iodev;
+	struct power_supply battery;
+};
+
+static enum power_supply_property max8998_battery_props[] = {
+	POWER_SUPPLY_PROP_PRESENT, /* the presence of battery */
+	POWER_SUPPLY_PROP_ONLINE, /* charger is active or not */
+};
+
+/* Note that the charger control is done by a current regulator "CHARGER" */
+static int max8998_battery_get_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		union power_supply_propval *val)
+{
+	struct max8998_battery_data *max8998 = container_of(psy,
+			struct max8998_battery_data, battery);
+	struct i2c_client *i2c = max8998->iodev->i2c;
+	int ret;
+	u8 reg;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, &reg);
+		if (ret)
+			return ret;
+		if (reg & (1 << 4))
+			val->intval = 0;
+		else
+			val->intval = 1;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, &reg);
+		if (ret)
+			return ret;
+		if (reg & (1 << 3))
+			val->intval = 0;
+		else
+			val->intval = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static __devinit int max8998_battery_probe(struct platform_device *pdev)
+{
+	struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev);
+	struct max8998_battery_data *max8998;
+	struct i2c_client *i2c;
+	int ret = 0;
+
+	if (!pdata) {
+		dev_err(pdev->dev.parent, "No platform init data supplied\n");
+		return -ENODEV;
+	}
+
+	max8998 = kzalloc(sizeof(struct max8998_battery_data), GFP_KERNEL);
+	if (!max8998)
+		return -ENOMEM;
+
+	max8998->dev = &pdev->dev;
+	max8998->iodev = iodev;
+	platform_set_drvdata(pdev, max8998);
+	i2c = max8998->iodev->i2c;
+
+	/* Setup "End of Charge" */
+	/* If EOC value equals 0,
+	 * remain value set from bootloader or default value */
+	if (pdata->eoc >= 10 && pdata->eoc <= 45) {
+		max8998_update_reg(i2c, MAX8998_REG_CHGR1,
+				(pdata->eoc / 5 - 2) << 5, 0x7 << 5);
+	} else if (pdata->eoc == 0) {
+		dev_dbg(max8998->dev,
+			"EOC value not set: leave it unchanged.\n");
+	} else {
+		dev_err(max8998->dev, "Invalid EOC value\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* Setup Charge Restart Level */
+	switch (pdata->restart) {
+	case 100:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x1 << 3, 0x3 << 3);
+		break;
+	case 150:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x0 << 3, 0x3 << 3);
+		break;
+	case 200:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x2 << 3, 0x3 << 3);
+		break;
+	case -1:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x3 << 3, 0x3 << 3);
+		break;
+	case 0:
+		dev_dbg(max8998->dev,
+			"Restart Level not set: leave it unchanged.\n");
+		break;
+	default:
+		dev_err(max8998->dev, "Invalid Restart Level\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* Setup Charge Full Timeout */
+	switch (pdata->timeout) {
+	case 5:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x0 << 4, 0x3 << 4);
+		break;
+	case 6:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x1 << 4, 0x3 << 4);
+		break;
+	case 7:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x2 << 4, 0x3 << 4);
+		break;
+	case -1:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x3 << 4, 0x3 << 4);
+		break;
+	case 0:
+		dev_dbg(max8998->dev,
+			"Full Timeout not set: leave it unchanged.\n");
+	default:
+		dev_err(max8998->dev, "Invalid Full Timeout value\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	max8998->battery.name = "max8998_pmic";
+	max8998->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+	max8998->battery.get_property = max8998_battery_get_property;
+	max8998->battery.properties = max8998_battery_props;
+	max8998->battery.num_properties = ARRAY_SIZE(max8998_battery_props);
+
+	ret = power_supply_register(max8998->dev, &max8998->battery);
+	if (ret) {
+		dev_err(max8998->dev, "failed: power supply register\n");
+		goto err;
+	}
+
+	return 0;
+err:
+	kfree(max8998);
+	return ret;
+}
+
+static int __devexit max8998_battery_remove(struct platform_device *pdev)
+{
+	struct max8998_battery_data *max8998 = platform_get_drvdata(pdev);
+
+	power_supply_unregister(&max8998->battery);
+	kfree(max8998);
+
+	return 0;
+}
+
+static const struct platform_device_id max8998_battery_id[] = {
+	{ "max8998-battery", TYPE_MAX8998 },
+};
+
+static struct platform_driver max8998_battery_driver = {
+	.driver = {
+		.name = "max8998-battery",
+		.owner = THIS_MODULE,
+	},
+	.probe = max8998_battery_probe,
+	.remove = __devexit_p(max8998_battery_remove),
+	.id_table = max8998_battery_id,
+};
+
+static int __init max8998_battery_init(void)
+{
+	return platform_driver_register(&max8998_battery_driver);
+}
+module_init(max8998_battery_init);
+
+static void __exit max8998_battery_cleanup(void)
+{
+	platform_driver_unregister(&max8998_battery_driver);
+}
+module_exit(max8998_battery_cleanup);
+
+MODULE_DESCRIPTION("MAXIM 8998 battery control driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:max8998-battery");
diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
index 61daa167b576..f4f0dfa4698a 100644
--- a/include/linux/mfd/max8998.h
+++ b/include/linux/mfd/max8998.h
@@ -87,6 +87,15 @@ struct max8998_regulator_data {
  * @wakeup: Allow to wake up from suspend
  * @rtc_delay: LP3974 RTC chip bug that requires delay after a register
  * write before reading it.
+ * @eoc: End of Charge Level in percent: 10% ~ 45% by 5% step
+ *   If it equals 0, leave it unchanged.
+ *   Otherwise, it is a invalid value.
+ * @restart: Restart Level in mV: 100, 150, 200, and -1 for disable.
+ *   If it equals 0, leave it unchanged.
+ *   Otherwise, it is a invalid value.
+ * @timeout: Full Timeout in hours: 5, 6, 7, and -1 for disable.
+ *   If it equals 0, leave it unchanged.
+ *   Otherwise, leave it unchanged.
  */
 struct max8998_platform_data {
 	struct max8998_regulator_data	*regulators;
@@ -107,6 +116,9 @@ struct max8998_platform_data {
 	int				buck2_default_idx;
 	bool				wakeup;
 	bool				rtc_delay;
+	int				eoc;
+	int				restart;
+	int				timeout;
 };
 
 #endif /*  __LINUX_MFD_MAX8998_H */
-- 
cgit v1.2.3


From 464f29a21792e0e506d936d147beea72a5f8e904 Mon Sep 17 00:00:00 2001
From: MyungJoo Ham <myungjoo.ham@samsung.com>
Date: Thu, 30 Jun 2011 10:09:40 +0900
Subject: max8903_charger: Allow platform data to be __initdata

Platform files may have declared 8903 platform data as __initdata. This
patch removes the dependency on pdata pointer so that using __initdata
on pdata will not incur errors. Note that such error does not incur
SECTION MISMATCH warning in (at least some) compilers.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/max8903_charger.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c
index 33ff0e37809e..a9b0209a2f55 100644
--- a/drivers/power/max8903_charger.c
+++ b/drivers/power/max8903_charger.c
@@ -28,7 +28,7 @@
 #include <linux/power/max8903_charger.h>
 
 struct max8903_data {
-	struct max8903_pdata *pdata;
+	struct max8903_pdata pdata;
 	struct device *dev;
 	struct power_supply psy;
 	bool fault;
@@ -52,8 +52,8 @@ static int max8903_get_property(struct power_supply *psy,
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
 		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
-		if (data->pdata->chg) {
-			if (gpio_get_value(data->pdata->chg) == 0)
+		if (data->pdata.chg) {
+			if (gpio_get_value(data->pdata.chg) == 0)
 				val->intval = POWER_SUPPLY_STATUS_CHARGING;
 			else if (data->usb_in || data->ta_in)
 				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
@@ -80,7 +80,7 @@ static int max8903_get_property(struct power_supply *psy,
 static irqreturn_t max8903_dcin(int irq, void *_data)
 {
 	struct max8903_data *data = _data;
-	struct max8903_pdata *pdata = data->pdata;
+	struct max8903_pdata *pdata = &data->pdata;
 	bool ta_in;
 	enum power_supply_type old_type;
 
@@ -121,7 +121,7 @@ static irqreturn_t max8903_dcin(int irq, void *_data)
 static irqreturn_t max8903_usbin(int irq, void *_data)
 {
 	struct max8903_data *data = _data;
-	struct max8903_pdata *pdata = data->pdata;
+	struct max8903_pdata *pdata = &data->pdata;
 	bool usb_in;
 	enum power_supply_type old_type;
 
@@ -160,7 +160,7 @@ static irqreturn_t max8903_usbin(int irq, void *_data)
 static irqreturn_t max8903_fault(int irq, void *_data)
 {
 	struct max8903_data *data = _data;
-	struct max8903_pdata *pdata = data->pdata;
+	struct max8903_pdata *pdata = &data->pdata;
 	bool fault;
 
 	fault = gpio_get_value(pdata->flt) ? false : true;
@@ -193,7 +193,7 @@ static __devinit int max8903_probe(struct platform_device *pdev)
 		dev_err(dev, "Cannot allocate memory.\n");
 		return -ENOMEM;
 	}
-	data->pdata = pdata;
+	memcpy(&data->pdata, pdata, sizeof(struct max8903_pdata));
 	data->dev = dev;
 	platform_set_drvdata(pdev, data);
 
@@ -349,7 +349,7 @@ static __devexit int max8903_remove(struct platform_device *pdev)
 	struct max8903_data *data = platform_get_drvdata(pdev);
 
 	if (data) {
-		struct max8903_pdata *pdata = data->pdata;
+		struct max8903_pdata *pdata = &data->pdata;
 
 		if (pdata->flt)
 			free_irq(gpio_to_irq(pdata->flt), data);
-- 
cgit v1.2.3


From 086ef502c202503a19a491838098157cdab6238e Mon Sep 17 00:00:00 2001
From: Donggeun Kim <dg77.kim@samsung.com>
Date: Thu, 30 Jun 2011 18:07:41 +0900
Subject: power_supply: MAX17042: Support additional properties

This patch supports additional properties (PRESENT, CYCLE_COUNT,
VOLTAGE_MAX, VOLTAGE_MIN_DESIGN, CURRENT_NOW, CURRENT_AVG,
CHARGE_FULL, and TEMP).
Plus, initialization code for registers is added.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/max17042_battery.c       | 173 ++++++++++++++++++++-------------
 include/linux/power/max17042_battery.h |  91 +++++++++++++++++
 2 files changed, 196 insertions(+), 68 deletions(-)

(limited to 'drivers')

diff --git a/drivers/power/max17042_battery.c b/drivers/power/max17042_battery.c
index 09f7496a6d8c..98bfab35b8e9 100644
--- a/drivers/power/max17042_battery.c
+++ b/drivers/power/max17042_battery.c
@@ -29,74 +29,6 @@
 #include <linux/power_supply.h>
 #include <linux/power/max17042_battery.h>
 
-enum max17042_register {
-	MAX17042_STATUS		= 0x00,
-	MAX17042_VALRT_Th	= 0x01,
-	MAX17042_TALRT_Th	= 0x02,
-	MAX17042_SALRT_Th	= 0x03,
-	MAX17042_AtRate		= 0x04,
-	MAX17042_RepCap		= 0x05,
-	MAX17042_RepSOC		= 0x06,
-	MAX17042_Age		= 0x07,
-	MAX17042_TEMP		= 0x08,
-	MAX17042_VCELL		= 0x09,
-	MAX17042_Current	= 0x0A,
-	MAX17042_AvgCurrent	= 0x0B,
-	MAX17042_Qresidual	= 0x0C,
-	MAX17042_SOC		= 0x0D,
-	MAX17042_AvSOC		= 0x0E,
-	MAX17042_RemCap		= 0x0F,
-	MAX17402_FullCAP	= 0x10,
-	MAX17042_TTE		= 0x11,
-	MAX17042_V_empty	= 0x12,
-
-	MAX17042_RSLOW		= 0x14,
-
-	MAX17042_AvgTA		= 0x16,
-	MAX17042_Cycles		= 0x17,
-	MAX17042_DesignCap	= 0x18,
-	MAX17042_AvgVCELL	= 0x19,
-	MAX17042_MinMaxTemp	= 0x1A,
-	MAX17042_MinMaxVolt	= 0x1B,
-	MAX17042_MinMaxCurr	= 0x1C,
-	MAX17042_CONFIG		= 0x1D,
-	MAX17042_ICHGTerm	= 0x1E,
-	MAX17042_AvCap		= 0x1F,
-	MAX17042_ManName	= 0x20,
-	MAX17042_DevName	= 0x21,
-	MAX17042_DevChem	= 0x22,
-
-	MAX17042_TempNom	= 0x24,
-	MAX17042_TempCold	= 0x25,
-	MAX17042_TempHot	= 0x26,
-	MAX17042_AIN		= 0x27,
-	MAX17042_LearnCFG	= 0x28,
-	MAX17042_SHFTCFG	= 0x29,
-	MAX17042_RelaxCFG	= 0x2A,
-	MAX17042_MiscCFG	= 0x2B,
-	MAX17042_TGAIN		= 0x2C,
-	MAx17042_TOFF		= 0x2D,
-	MAX17042_CGAIN		= 0x2E,
-	MAX17042_COFF		= 0x2F,
-
-	MAX17042_Q_empty	= 0x33,
-	MAX17042_T_empty	= 0x34,
-
-	MAX17042_RCOMP0		= 0x38,
-	MAX17042_TempCo		= 0x39,
-	MAX17042_Rx		= 0x3A,
-	MAX17042_T_empty0	= 0x3B,
-	MAX17042_TaskPeriod	= 0x3C,
-	MAX17042_FSTAT		= 0x3D,
-
-	MAX17042_SHDNTIMER	= 0x3F,
-
-	MAX17042_VFRemCap	= 0x4A,
-
-	MAX17042_QH		= 0x4D,
-	MAX17042_QL		= 0x4E,
-};
-
 struct max17042_chip {
 	struct i2c_client *client;
 	struct power_supply battery;
@@ -123,10 +55,27 @@ static int max17042_read_reg(struct i2c_client *client, u8 reg)
 	return ret;
 }
 
+static void max17042_set_reg(struct i2c_client *client,
+			     struct max17042_reg_data *data, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		max17042_write_reg(client, data[i].addr, data[i].data);
+}
+
 static enum power_supply_property max17042_battery_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_VOLTAGE_AVG,
 	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
 };
 
 static int max17042_get_property(struct power_supply *psy,
@@ -137,6 +86,30 @@ static int max17042_get_property(struct power_supply *psy,
 				struct max17042_chip, battery);
 
 	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = max17042_read_reg(chip->client,
+				MAX17042_STATUS);
+		if (val->intval & MAX17042_STATUS_BattAbsent)
+			val->intval = 0;
+		else
+			val->intval = 1;
+		break;
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+		val->intval = max17042_read_reg(chip->client,
+				MAX17042_Cycles);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		val->intval = max17042_read_reg(chip->client,
+				MAX17042_MinMaxVolt);
+		val->intval >>= 8;
+		val->intval *= 20000; /* Units of LSB = 20mV */
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = max17042_read_reg(chip->client,
+				MAX17042_V_empty);
+		val->intval >>= 7;
+		val->intval *= 10000; /* Units of LSB = 10mV */
+		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 		val->intval = max17042_read_reg(chip->client,
 				MAX17042_VCELL) * 83; /* 1000 / 12 = 83 */
@@ -149,6 +122,57 @@ static int max17042_get_property(struct power_supply *psy,
 		val->intval = max17042_read_reg(chip->client,
 				MAX17042_SOC) / 256;
 		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		val->intval = max17042_read_reg(chip->client,
+				MAX17042_RepSOC);
+		if ((val->intval / 256) >= MAX17042_BATTERY_FULL)
+			val->intval = 1;
+		else if (val->intval >= 0)
+			val->intval = 0;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = max17042_read_reg(chip->client,
+				MAX17042_TEMP);
+		/* The value is signed. */
+		if (val->intval & 0x8000) {
+			val->intval = (0x7fff & ~val->intval) + 1;
+			val->intval *= -1;
+		}
+		/* The value is converted into deci-centigrade scale */
+		/* Units of LSB = 1 / 256 degree Celsius */
+		val->intval = val->intval * 10 / 256;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (chip->pdata->enable_current_sense) {
+			val->intval = max17042_read_reg(chip->client,
+					MAX17042_Current);
+			if (val->intval & 0x8000) {
+				/* Negative */
+				val->intval = ~val->intval & 0x7fff;
+				val->intval++;
+				val->intval *= -1;
+			}
+			val->intval >>= 4;
+			val->intval *= 1000000 * 25 / chip->pdata->r_sns;
+		} else {
+			return -EINVAL;
+		}
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		if (chip->pdata->enable_current_sense) {
+			val->intval = max17042_read_reg(chip->client,
+					MAX17042_AvgCurrent);
+			if (val->intval & 0x8000) {
+				/* Negative */
+				val->intval = ~val->intval & 0x7fff;
+				val->intval++;
+				val->intval *= -1;
+			}
+			val->intval *= 1562500 / chip->pdata->r_sns;
+		} else {
+			return -EINVAL;
+		}
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -180,6 +204,11 @@ static int __devinit max17042_probe(struct i2c_client *client,
 	chip->battery.properties	= max17042_battery_props;
 	chip->battery.num_properties	= ARRAY_SIZE(max17042_battery_props);
 
+	/* When current is not measured,
+	 * CURRENT_NOW and CURRENT_AVG properties should be invisible. */
+	if (!chip->pdata->enable_current_sense)
+		chip->battery.num_properties -= 2;
+
 	ret = power_supply_register(&client->dev, &chip->battery);
 	if (ret) {
 		dev_err(&client->dev, "failed: power supply register\n");
@@ -187,10 +216,18 @@ static int __devinit max17042_probe(struct i2c_client *client,
 		return ret;
 	}
 
+	/* Initialize registers according to values from the platform data */
+	if (chip->pdata->init_data)
+		max17042_set_reg(client, chip->pdata->init_data,
+				 chip->pdata->num_init_data);
+
 	if (!chip->pdata->enable_current_sense) {
 		max17042_write_reg(client, MAX17042_CGAIN, 0x0000);
 		max17042_write_reg(client, MAX17042_MiscCFG, 0x0003);
 		max17042_write_reg(client, MAX17042_LearnCFG, 0x0007);
+	} else {
+		if (chip->pdata->r_sns == 0)
+			chip->pdata->r_sns = MAX17042_DEFAULT_SNS_RESISTOR;
 	}
 
 	return 0;
diff --git a/include/linux/power/max17042_battery.h b/include/linux/power/max17042_battery.h
index 7995deb8bfc1..fe99211fb2b8 100644
--- a/include/linux/power/max17042_battery.h
+++ b/include/linux/power/max17042_battery.h
@@ -23,8 +23,99 @@
 #ifndef __MAX17042_BATTERY_H_
 #define __MAX17042_BATTERY_H_
 
+#define MAX17042_STATUS_BattAbsent	(1 << 3)
+#define MAX17042_BATTERY_FULL	(100)
+#define MAX17042_DEFAULT_SNS_RESISTOR	(10000)
+
+enum max17042_register {
+	MAX17042_STATUS		= 0x00,
+	MAX17042_VALRT_Th	= 0x01,
+	MAX17042_TALRT_Th	= 0x02,
+	MAX17042_SALRT_Th	= 0x03,
+	MAX17042_AtRate		= 0x04,
+	MAX17042_RepCap		= 0x05,
+	MAX17042_RepSOC		= 0x06,
+	MAX17042_Age		= 0x07,
+	MAX17042_TEMP		= 0x08,
+	MAX17042_VCELL		= 0x09,
+	MAX17042_Current	= 0x0A,
+	MAX17042_AvgCurrent	= 0x0B,
+	MAX17042_Qresidual	= 0x0C,
+	MAX17042_SOC		= 0x0D,
+	MAX17042_AvSOC		= 0x0E,
+	MAX17042_RemCap		= 0x0F,
+	MAX17402_FullCAP	= 0x10,
+	MAX17042_TTE		= 0x11,
+	MAX17042_V_empty	= 0x12,
+
+	MAX17042_RSLOW		= 0x14,
+
+	MAX17042_AvgTA		= 0x16,
+	MAX17042_Cycles		= 0x17,
+	MAX17042_DesignCap	= 0x18,
+	MAX17042_AvgVCELL	= 0x19,
+	MAX17042_MinMaxTemp	= 0x1A,
+	MAX17042_MinMaxVolt	= 0x1B,
+	MAX17042_MinMaxCurr	= 0x1C,
+	MAX17042_CONFIG		= 0x1D,
+	MAX17042_ICHGTerm	= 0x1E,
+	MAX17042_AvCap		= 0x1F,
+	MAX17042_ManName	= 0x20,
+	MAX17042_DevName	= 0x21,
+	MAX17042_DevChem	= 0x22,
+
+	MAX17042_TempNom	= 0x24,
+	MAX17042_TempCold	= 0x25,
+	MAX17042_TempHot	= 0x26,
+	MAX17042_AIN		= 0x27,
+	MAX17042_LearnCFG	= 0x28,
+	MAX17042_SHFTCFG	= 0x29,
+	MAX17042_RelaxCFG	= 0x2A,
+	MAX17042_MiscCFG	= 0x2B,
+	MAX17042_TGAIN		= 0x2C,
+	MAx17042_TOFF		= 0x2D,
+	MAX17042_CGAIN		= 0x2E,
+	MAX17042_COFF		= 0x2F,
+
+	MAX17042_Q_empty	= 0x33,
+	MAX17042_T_empty	= 0x34,
+
+	MAX17042_RCOMP0		= 0x38,
+	MAX17042_TempCo		= 0x39,
+	MAX17042_Rx		= 0x3A,
+	MAX17042_T_empty0	= 0x3B,
+	MAX17042_TaskPeriod	= 0x3C,
+	MAX17042_FSTAT		= 0x3D,
+
+	MAX17042_SHDNTIMER	= 0x3F,
+
+	MAX17042_VFRemCap	= 0x4A,
+
+	MAX17042_QH		= 0x4D,
+	MAX17042_QL		= 0x4E,
+};
+
+/*
+ * used for setting a register to a desired value
+ * addr : address for a register
+ * data : setting value for the register
+ */
+struct max17042_reg_data {
+	u8 addr;
+	u16 data;
+};
+
 struct max17042_platform_data {
+	struct max17042_reg_data *init_data;
+	int num_init_data; /* Number of enties in init_data array */
 	bool enable_current_sense;
+
+	/*
+	 * R_sns in micro-ohms.
+	 * default 10000 (if r_sns = 0) as it is the recommended value by
+	 * the datasheet although it can be changed by board designers.
+	 */
+	unsigned int r_sns;
 };
 
 #endif /* __MAX17042_BATTERY_H_ */
-- 
cgit v1.2.3


From f8c63918c9a3004bd052fa4af08aa1cefbcd79ac Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 4 Jul 2011 18:04:15 +0800
Subject: gpio-charger: Fix checking return value of request_any_context_irq

request_any_context_irq() returns a negative value on failure.
On success, it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/gpio-charger.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c
index 718f2c537827..a64b8854cfd5 100644
--- a/drivers/power/gpio-charger.c
+++ b/drivers/power/gpio-charger.c
@@ -127,7 +127,7 @@ static int __devinit gpio_charger_probe(struct platform_device *pdev)
 		ret = request_any_context_irq(irq, gpio_charger_irq,
 				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				dev_name(&pdev->dev), charger);
-		if (ret)
+		if (ret < 0)
 			dev_warn(&pdev->dev, "Failed to request irq: %d\n", ret);
 		else
 			gpio_charger->irq = irq;
-- 
cgit v1.2.3