From 1ccef350db2f13715040a10df77ae672206004cf Mon Sep 17 00:00:00 2001 From: Jianbo Liu Date: Tue, 27 Mar 2018 09:22:16 +0000 Subject: net/mlx5e: Allow offloading ipv4 header re-write for icmp For ICMPv4, the checksum is calculated from the ICMP headers and data. Since the ICMPv4 checksum doesn't cover the IP header, we can allow to do L3 header re-write for this protocol. Fixes: bdd66ac0aeed ('net/mlx5e: Disallow TC offloading of unsupported match/action combinations') Signed-off-by: Jianbo Liu Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 4197001f9801..3c534fc43400 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -1864,7 +1864,8 @@ static bool modify_header_match_supported(struct mlx5_flow_spec *spec, } ip_proto = MLX5_GET(fte_match_set_lyr_2_4, headers_v, ip_protocol); - if (modify_ip_header && ip_proto != IPPROTO_TCP && ip_proto != IPPROTO_UDP) { + if (modify_ip_header && ip_proto != IPPROTO_TCP && + ip_proto != IPPROTO_UDP && ip_proto != IPPROTO_ICMP) { pr_info("can't offload re-write of ip proto %d\n", ip_proto); return false; } -- cgit v1.2.3 From 35f80acb24cd53dabd65e0660e46afdf5c45991d Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Thu, 21 Dec 2017 15:15:24 -0600 Subject: net/mlx5e: DCBNL fix min inline header size for dscp When the trust state is set to dscp and the netdev is down, the inline header size is not updated. When netdev is up, the inline header size stays at L2 instead of IP. Fix this issue by updating the private parameter when the netdev is in down so that when netdev is up, it picks up the right header size. Fixes: fbcb127e89ba ("net/mlx5e: Support DSCP trust state ...") Signed-off-by: Huy Nguyen Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index 3d46ef48d5b8..c641d5656b2d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -1007,12 +1007,14 @@ static void mlx5e_trust_update_sq_inline_mode(struct mlx5e_priv *priv) mutex_lock(&priv->state_lock); - if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) - goto out; - new_channels.params = priv->channels.params; mlx5e_trust_update_tx_min_inline_mode(priv, &new_channels.params); + if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) { + priv->channels.params = new_channels.params; + goto out; + } + /* Skip if tx_min_inline is the same */ if (new_channels.params.tx_min_inline_mode == priv->channels.params.tx_min_inline_mode) -- cgit v1.2.3 From 6082d9c9c94a408d7409b5f2e4e42ac9e8b16d0d Mon Sep 17 00:00:00 2001 From: Israel Rukshin Date: Thu, 12 Apr 2018 09:49:11 +0000 Subject: net/mlx5: Fix mlx5_get_vector_affinity function Adding the vector offset when calling to mlx5_vector2eqn() is wrong. This is because mlx5_vector2eqn() checks if EQ index is equal to vector number and the fact that the internal completion vectors that mlx5 allocates don't get an EQ index. The second problem here is that using effective_affinity_mask gives the same CPU for different vectors. This leads to unmapped queues when calling it from blk_mq_rdma_map_queues(). This doesn't happen when using affinity_hint mask. Fixes: 2572cf57d75a ("mlx5: fix mlx5_get_vector_affinity to start from completion vector 0") Fixes: 05e0cc84e00c ("net/mlx5: Fix get vector affinity helper function") Signed-off-by: Israel Rukshin Reviewed-by: Max Gurtovoy Reviewed-by: Sagi Grimberg --- drivers/infiniband/hw/mlx5/main.c | 2 +- include/linux/mlx5/driver.h | 12 +++--------- 2 files changed, 4 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index daa919e5a442..241cf4ff9901 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -4757,7 +4757,7 @@ mlx5_ib_get_vector_affinity(struct ib_device *ibdev, int comp_vector) { struct mlx5_ib_dev *dev = to_mdev(ibdev); - return mlx5_get_vector_affinity(dev->mdev, comp_vector); + return mlx5_get_vector_affinity_hint(dev->mdev, comp_vector); } /* The mlx5_ib_multiport_mutex should be held when calling this function */ diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 767d193c269a..2a156c5dfadd 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -1284,25 +1284,19 @@ enum { }; static inline const struct cpumask * -mlx5_get_vector_affinity(struct mlx5_core_dev *dev, int vector) +mlx5_get_vector_affinity_hint(struct mlx5_core_dev *dev, int vector) { - const struct cpumask *mask; struct irq_desc *desc; unsigned int irq; int eqn; int err; - err = mlx5_vector2eqn(dev, MLX5_EQ_VEC_COMP_BASE + vector, &eqn, &irq); + err = mlx5_vector2eqn(dev, vector, &eqn, &irq); if (err) return NULL; desc = irq_to_desc(irq); -#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK - mask = irq_data_get_effective_affinity_mask(&desc->irq_data); -#else - mask = desc->irq_common_data.affinity; -#endif - return mask; + return desc->affinity_hint; } #endif /* MLX5_DRIVER_H */ -- cgit v1.2.3 From d9a96ec362e3da878c378854e25321c85bac52c2 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Tue, 20 Mar 2018 18:17:25 +0200 Subject: net/mlx5e: TX, Use correct counter in dma_map error flow In case of a dma_mapping_error, do not use wi->num_dma as a parameter for dma unmap function because it's yet to be set, and holds an out-of-date value. Use actual value (local variable num_dma) instead. Fixes: 34802a42b352 ("net/mlx5e: Do not modify the TX SKB") Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index 20297108528a..5532aa3675c7 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -255,7 +255,7 @@ mlx5e_txwqe_build_dsegs(struct mlx5e_txqsq *sq, struct sk_buff *skb, dma_addr = dma_map_single(sq->pdev, skb_data, headlen, DMA_TO_DEVICE); if (unlikely(dma_mapping_error(sq->pdev, dma_addr))) - return -ENOMEM; + goto dma_unmap_wqe_err; dseg->addr = cpu_to_be64(dma_addr); dseg->lkey = sq->mkey_be; @@ -273,7 +273,7 @@ mlx5e_txwqe_build_dsegs(struct mlx5e_txqsq *sq, struct sk_buff *skb, dma_addr = skb_frag_dma_map(sq->pdev, frag, 0, fsz, DMA_TO_DEVICE); if (unlikely(dma_mapping_error(sq->pdev, dma_addr))) - return -ENOMEM; + goto dma_unmap_wqe_err; dseg->addr = cpu_to_be64(dma_addr); dseg->lkey = sq->mkey_be; @@ -285,6 +285,10 @@ mlx5e_txwqe_build_dsegs(struct mlx5e_txqsq *sq, struct sk_buff *skb, } return num_dma; + +dma_unmap_wqe_err: + mlx5e_dma_unmap_wqe_err(sq, num_dma); + return -ENOMEM; } static inline void @@ -380,17 +384,15 @@ static netdev_tx_t mlx5e_sq_xmit(struct mlx5e_txqsq *sq, struct sk_buff *skb, num_dma = mlx5e_txwqe_build_dsegs(sq, skb, skb_data, headlen, (struct mlx5_wqe_data_seg *)cseg + ds_cnt); if (unlikely(num_dma < 0)) - goto dma_unmap_wqe_err; + goto err_drop; mlx5e_txwqe_complete(sq, skb, opcode, ds_cnt + num_dma, num_bytes, num_dma, wi, cseg); return NETDEV_TX_OK; -dma_unmap_wqe_err: +err_drop: sq->stats.dropped++; - mlx5e_dma_unmap_wqe_err(sq, wi->num_dma); - dev_kfree_skb_any(skb); return NETDEV_TX_OK; @@ -645,17 +647,15 @@ netdev_tx_t mlx5i_sq_xmit(struct mlx5e_txqsq *sq, struct sk_buff *skb, num_dma = mlx5e_txwqe_build_dsegs(sq, skb, skb_data, headlen, (struct mlx5_wqe_data_seg *)cseg + ds_cnt); if (unlikely(num_dma < 0)) - goto dma_unmap_wqe_err; + goto err_drop; mlx5e_txwqe_complete(sq, skb, opcode, ds_cnt + num_dma, num_bytes, num_dma, wi, cseg); return NETDEV_TX_OK; -dma_unmap_wqe_err: +err_drop: sq->stats.dropped++; - mlx5e_dma_unmap_wqe_err(sq, wi->num_dma); - dev_kfree_skb_any(skb); return NETDEV_TX_OK; -- cgit v1.2.3 From 9c26f5f89d01ca21560c6b8a8e4054c271cc3a9c Mon Sep 17 00:00:00 2001 From: Talat Batheesh Date: Sun, 15 Apr 2018 11:26:19 +0300 Subject: net/mlx5: Avoid cleaning flow steering table twice during error flow When we fail to initialize the RX root namespace, we need to clean only that and not the entire flow steering. Currently the code may try to clean the flow steering twice on error witch leads to null pointer deference. Make sure we clean correctly. Fixes: fba53f7b5719 ("net/mlx5: Introduce mlx5_flow_steering structure") Signed-off-by: Talat Batheesh Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index de51e7c39bc8..2595c67ea39e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -187,6 +187,7 @@ static void del_sw_ns(struct fs_node *node); static void del_sw_hw_rule(struct fs_node *node); static bool mlx5_flow_dests_cmp(struct mlx5_flow_destination *d1, struct mlx5_flow_destination *d2); +static void cleanup_root_ns(struct mlx5_flow_root_namespace *root_ns); static struct mlx5_flow_rule * find_flow_rule(struct fs_fte *fte, struct mlx5_flow_destination *dest); @@ -2351,23 +2352,27 @@ static int create_anchor_flow_table(struct mlx5_flow_steering *steering) static int init_root_ns(struct mlx5_flow_steering *steering) { + int err; + steering->root_ns = create_root_ns(steering, FS_FT_NIC_RX); if (!steering->root_ns) - goto cleanup; + return -ENOMEM; - if (init_root_tree(steering, &root_fs, &steering->root_ns->ns.node)) - goto cleanup; + err = init_root_tree(steering, &root_fs, &steering->root_ns->ns.node); + if (err) + goto out_err; set_prio_attrs(steering->root_ns); - - if (create_anchor_flow_table(steering)) - goto cleanup; + err = create_anchor_flow_table(steering); + if (err) + goto out_err; return 0; -cleanup: - mlx5_cleanup_fs(steering->dev); - return -ENOMEM; +out_err: + cleanup_root_ns(steering->root_ns); + steering->root_ns = NULL; + return err; } static void clean_tree(struct fs_node *node) -- cgit v1.2.3 From 99beaa22f11152e128861f1c681744ca4749e9f8 Mon Sep 17 00:00:00 2001 From: Shahar Klein Date: Sun, 8 Apr 2018 09:50:53 +0300 Subject: net/mlx5e: Fix traffic between VF and representor After the cited commit, WQE RQ size is calculated based on sw_mtu but it was not set for representors. This commit fixes that. Fixes: 472a1e44b349 ("net/mlx5e: Save MTU in channels params") Signed-off-by: Shahar Klein Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index d8f68e4d1018..876c3e4c6193 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -877,13 +877,14 @@ static const struct net_device_ops mlx5e_netdev_ops_rep = { }; static void mlx5e_build_rep_params(struct mlx5_core_dev *mdev, - struct mlx5e_params *params) + struct mlx5e_params *params, u16 mtu) { u8 cq_period_mode = MLX5_CAP_GEN(mdev, cq_period_start_from_cqe) ? MLX5_CQ_PERIOD_MODE_START_FROM_CQE : MLX5_CQ_PERIOD_MODE_START_FROM_EQE; params->hard_mtu = MLX5E_ETH_HARD_MTU; + params->sw_mtu = mtu; params->log_sq_size = MLX5E_REP_PARAMS_LOG_SQ_SIZE; params->rq_wq_type = MLX5_WQ_TYPE_LINKED_LIST; params->log_rq_mtu_frames = MLX5E_REP_PARAMS_LOG_RQ_SIZE; @@ -931,7 +932,7 @@ static void mlx5e_init_rep(struct mlx5_core_dev *mdev, priv->channels.params.num_channels = profile->max_nch(mdev); - mlx5e_build_rep_params(mdev, &priv->channels.params); + mlx5e_build_rep_params(mdev, &priv->channels.params, netdev->mtu); mlx5e_build_rep_netdev(netdev); mlx5e_timestamp_init(priv); -- cgit v1.2.3 From 202854e9f4df99df1f79962a9e8f94a7de602f7b Mon Sep 17 00:00:00 2001 From: Chris Mi Date: Mon, 16 Apr 2018 10:36:51 +0900 Subject: net/mlx5: Properly deal with flow counters when deleting rules When deleting a flow counter, the modify mask should be the action and the flow counter. Otherwise the flow counter is not deleted and we'll get a firmware warning when deleting the remaining destinations on the same FTE. It only happens in the presence of flow counter and multiple vport destinations. If there is only one vport destination, there is no need to update the FTE when deleting the only vport destination, we just delete the FTE. Fixes: ae05831424ed ("net/mlx5: Add option to add fwd rule with counter") Signed-off-by: Chris Mi Signed-off-by: Jianbo Liu Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 2595c67ea39e..c39c1692e674 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -482,7 +482,8 @@ static void del_sw_hw_rule(struct fs_node *node) if (rule->dest_attr.type == MLX5_FLOW_DESTINATION_TYPE_COUNTER && --fte->dests_size) { - modify_mask = BIT(MLX5_SET_FTE_MODIFY_ENABLE_MASK_ACTION); + modify_mask = BIT(MLX5_SET_FTE_MODIFY_ENABLE_MASK_ACTION) | + BIT(MLX5_SET_FTE_MODIFY_ENABLE_MASK_FLOW_COUNTERS); fte->action.action &= ~MLX5_FLOW_CONTEXT_ACTION_COUNT; update_fte = true; goto out; -- cgit v1.2.3