From de2a3027f6f15e2f6558dc4d178282ccc1f054db Mon Sep 17 00:00:00 2001 From: Arend Van Spriel Date: Tue, 20 Feb 2018 00:14:23 +0100 Subject: brcmfmac: remove brcmf_bus_started() from bus api No longer needed to call this in bus layer so make it static and call it in the last phase of brcmf_attach() instead. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- .../net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 1 - .../wireless/broadcom/brcm80211/brcmfmac/core.c | 14 +++++++---- .../wireless/broadcom/brcm80211/brcmfmac/pcie.c | 20 +--------------- .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 10 ++------ .../net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 28 ++++------------------ 5 files changed, 16 insertions(+), 57 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h index 0b76a615708e..0b90a63bdeb1 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h @@ -253,7 +253,6 @@ void brcmf_dev_reset(struct device *dev); /* Configure the "global" bus state used by upper layers */ void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state); -int brcmf_bus_started(struct device *dev); s32 brcmf_iovar_data_set(struct device *dev, char *name, void *data, u32 len); void brcmf_bus_add_txhdrlen(struct device *dev, uint len); diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c index 9eab7a94747e..19048526b4af 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c @@ -944,11 +944,10 @@ static int brcmf_revinfo_read(struct seq_file *s, void *data) return 0; } -int brcmf_bus_started(struct device *dev) +static int brcmf_bus_started(struct brcmf_pub *drvr) { int ret = -1; - struct brcmf_bus *bus_if = dev_get_drvdata(dev); - struct brcmf_pub *drvr = bus_if->drvr; + struct brcmf_bus *bus_if = drvr->bus_if; struct brcmf_if *ifp; struct brcmf_if *p2p_ifp; @@ -965,7 +964,7 @@ int brcmf_bus_started(struct device *dev) brcmf_bus_change_state(bus_if, BRCMF_BUS_UP); /* do bus specific preinit here */ - ret = brcmf_bus_preinit(ifp->drvr->bus_if); + ret = brcmf_bus_preinit(bus_if); if (ret < 0) goto fail; @@ -1085,7 +1084,12 @@ int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings) /* attach firmware event handler */ brcmf_fweh_attach(drvr); - return ret; + ret = brcmf_bus_started(drvr); + if (ret != 0) { + brcmf_err("dongle is not responding: err=%d\n", ret); + goto fail; + } + return 0; fail: brcmf_detach(dev); diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c index 8752707557bf..a7d827ce1684 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c @@ -1581,24 +1581,6 @@ static void brcmf_pcie_release_resource(struct brcmf_pciedev_info *devinfo) } -static int brcmf_pcie_attach_bus(struct brcmf_pciedev_info *devinfo) -{ - int ret; - - /* Attach to the common driver interface */ - ret = brcmf_attach(&devinfo->pdev->dev, devinfo->settings); - if (ret) { - brcmf_err("brcmf_attach failed\n"); - } else { - ret = brcmf_bus_started(&devinfo->pdev->dev); - if (ret) - brcmf_err("dongle is not responding\n"); - } - - return ret; -} - - static u32 brcmf_pcie_buscore_prep_addr(const struct pci_dev *pdev, u32 addr) { u32 ret_addr; @@ -1735,7 +1717,7 @@ static void brcmf_pcie_setup(struct device *dev, int ret, init_waitqueue_head(&devinfo->mbdata_resp_wait); brcmf_pcie_intr_enable(devinfo); - if (brcmf_pcie_attach_bus(devinfo) == 0) + if (brcmf_attach(&devinfo->pdev->dev, devinfo->settings) == 0) return; brcmf_pcie_bus_console_read(devinfo); diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index 0f1e4528fe0d..aa8233620bb9 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -3422,6 +3422,8 @@ static int brcmf_sdio_bus_preinit(struct device *dev) if (bus->rxbuf) bus->rxblen = value; + brcmf_sdio_debugfs_create(bus); + /* the commands below use the terms tx and rx from * a device perspective, ie. bus:txglom affects the * bus transfers from device to host. @@ -4136,14 +4138,6 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err, goto fail; } - brcmf_sdio_debugfs_create(bus); - - err = brcmf_bus_started(dev); - if (err != 0) { - brcmf_err("dongle is not responding\n"); - goto fail; - } - /* ready */ return; diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c index d22cd1662da6..41642dda40fd 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c @@ -1155,27 +1155,6 @@ static const struct brcmf_bus_ops brcmf_usb_bus_ops = { .get_fwname = brcmf_usb_get_fwname, }; -static int brcmf_usb_bus_setup(struct brcmf_usbdev_info *devinfo) -{ - int ret; - - /* Attach to the common driver interface */ - ret = brcmf_attach(devinfo->dev, devinfo->settings); - if (ret) { - brcmf_err("brcmf_attach failed\n"); - return ret; - } - - ret = brcmf_bus_started(devinfo->dev); - if (ret) - goto fail; - - return 0; -fail: - brcmf_detach(devinfo->dev); - return ret; -} - static void brcmf_usb_probe_phase2(struct device *dev, int ret, const struct firmware *fw, void *nvram, u32 nvlen) @@ -1203,7 +1182,8 @@ static void brcmf_usb_probe_phase2(struct device *dev, int ret, if (ret) goto error; - ret = brcmf_usb_bus_setup(devinfo); + /* Attach to the common driver interface */ + ret = brcmf_attach(devinfo->dev, devinfo->settings); if (ret) goto error; @@ -1253,7 +1233,7 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo) } if (!brcmf_usb_dlneeded(devinfo)) { - ret = brcmf_usb_bus_setup(devinfo); + ret = brcmf_attach(devinfo->dev, devinfo->settings); if (ret) goto fail; /* we are done */ @@ -1456,7 +1436,7 @@ static int brcmf_usb_resume(struct usb_interface *intf) brcmf_dbg(USB, "Enter\n"); if (!devinfo->wowl_enabled) - return brcmf_usb_bus_setup(devinfo); + return brcmf_attach(devinfo->dev, devinfo->settings); devinfo->bus_pub.state = BRCMFMAC_USB_STATE_UP; brcmf_usb_rx_fill_all(devinfo); -- cgit v1.2.3