From 40ce1121c1d76daf9048a86e36c83e469281b9fd Mon Sep 17 00:00:00 2001 From: Jocelyn Falempe Date: Tue, 8 Mar 2022 18:43:21 +0100 Subject: drm/mgag200: Fix PLL setup for g200wb and g200ew commit f86c3ed55920 ("drm/mgag200: Split PLL setup into compute and update functions") introduced a regression for g200wb and g200ew. The PLLs are not set up properly, and VGA screen stays black, or displays "out of range" message. MGA1064_WB_PIX_PLLC_N/M/P was mistakenly replaced with MGA1064_PIX_PLLC_N/M/P which have different addresses. Patch tested on a Dell T310 with g200wb Fixes: f86c3ed55920 ("drm/mgag200: Split PLL setup into compute and update functions") Cc: stable@vger.kernel.org Signed-off-by: Jocelyn Falempe Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20220308174321.225606-1-jfalempe@redhat.com --- drivers/gpu/drm/mgag200/mgag200_pll.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/mgag200/mgag200_pll.c b/drivers/gpu/drm/mgag200/mgag200_pll.c index e9ae22b4f813..52be08b744ad 100644 --- a/drivers/gpu/drm/mgag200/mgag200_pll.c +++ b/drivers/gpu/drm/mgag200/mgag200_pll.c @@ -404,9 +404,9 @@ mgag200_pixpll_update_g200wb(struct mgag200_pll *pixpll, const struct mgag200_pl udelay(50); /* program pixel pll register */ - WREG_DAC(MGA1064_PIX_PLLC_N, xpixpllcn); - WREG_DAC(MGA1064_PIX_PLLC_M, xpixpllcm); - WREG_DAC(MGA1064_PIX_PLLC_P, xpixpllcp); + WREG_DAC(MGA1064_WB_PIX_PLLC_N, xpixpllcn); + WREG_DAC(MGA1064_WB_PIX_PLLC_M, xpixpllcm); + WREG_DAC(MGA1064_WB_PIX_PLLC_P, xpixpllcp); udelay(50); -- cgit v1.2.3 From 6061806a863e8b65b109eb06a280041cc7525442 Mon Sep 17 00:00:00 2001 From: Christoph Niedermaier Date: Tue, 1 Feb 2022 12:36:43 +0100 Subject: drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check() If display timings were read from the devicetree using of_get_display_timing() and pixelclk-active is defined there, the flag DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE is automatically generated. Through the function drm_bus_flags_from_videomode() e.g. called in the panel-simple driver this flag got into the bus flags, but then in imx_pd_bridge_atomic_check() the bus flag check failed and will not initialize the display. The original commit fe141cedc433 does not explain why this check was introduced. So remove the bus flags check, because it stops the initialization of the display with valid bus flags. Fixes: fe141cedc433 ("drm/imx: pd: Use bus format/flags provided by the bridge when available") Signed-off-by: Christoph Niedermaier Cc: Marek Vasut Cc: Boris Brezillon Cc: Philipp Zabel Cc: David Airlie Cc: Daniel Vetter Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: linux-arm-kernel@lists.infradead.org To: dri-devel@lists.freedesktop.org Tested-by: Max Krummenacher Acked-by: Boris Brezillon Signed-off-by: Marek Vasut Link: https://patchwork.freedesktop.org/patch/msgid/20220201113643.4638-1-cniedermaier@dh-electronics.com Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/imx/parallel-display.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c index a8aba0141ce7..06cb1a59b9bc 100644 --- a/drivers/gpu/drm/imx/parallel-display.c +++ b/drivers/gpu/drm/imx/parallel-display.c @@ -217,14 +217,6 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge, if (!imx_pd_format_supported(bus_fmt)) return -EINVAL; - if (bus_flags & - ~(DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_DE_HIGH | - DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE | - DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)) { - dev_warn(imxpd->dev, "invalid bus_flags (%x)\n", bus_flags); - return -EINVAL; - } - bridge_state->output_bus_cfg.flags = bus_flags; bridge_state->input_bus_cfg.flags = bus_flags; imx_crtc_state->bus_flags = bus_flags; -- cgit v1.2.3 From fc1b6ef7bfb3d1d4df868b1c3e0480cacda6cd81 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 20 Feb 2022 05:07:18 +0100 Subject: drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings The Innolux G070Y2-L01 supports two modes of operation: 1) FRC=Low/NC ... MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ... BPP=6 2) FRC=High ..... MEDIA_BUS_FMT_RGB888_1X7X4_SPWG ... BPP=8 Currently the panel description mixes both, BPP from 1) and bus format from 2), which triggers a warning at panel-simple.c:615. Pick the later, set bpp=8, fix the warning. Fixes: a5d2ade627dca ("drm/panel: simple: Add support for Innolux G070Y2-L01") Signed-off-by: Marek Vasut Cc: Christoph Fritz Cc: Laurent Pinchart Cc: Maxime Ripard Cc: Sam Ravnborg Cc: Thomas Zimmermann Reviewed-by: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/20220220040718.532866-1-marex@denx.de Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/panel/panel-simple.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 3c08f9827acf..b42c1d816e79 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2017,7 +2017,7 @@ static const struct display_timing innolux_g070y2_l01_timing = { static const struct panel_desc innolux_g070y2_l01 = { .timings = &innolux_g070y2_l01_timing, .num_timings = 1, - .bpc = 6, + .bpc = 8, .size = { .width = 152, .height = 91, -- cgit v1.2.3 From 3c3384050d68570f9de0fec9e58824decfefba7a Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Tue, 15 Mar 2022 09:45:59 +0100 Subject: drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS Fix a number of undefined references to drm_kms_helper.ko in drm_dp_helper.ko: arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_duplicate_state': drm_dp_mst_topology.c:(.text+0x2df0): undefined reference to `__drm_atomic_helper_private_obj_duplicate_state' arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_delayed_destroy_work': drm_dp_mst_topology.c:(.text+0x370c): undefined reference to `drm_kms_helper_hotplug_event' arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_up_req_work': drm_dp_mst_topology.c:(.text+0x7938): undefined reference to `drm_kms_helper_hotplug_event' arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_link_probe_work': drm_dp_mst_topology.c:(.text+0x82e0): undefined reference to `drm_kms_helper_hotplug_event' This happens if panel-edp.ko has been configured with DRM_PANEL_EDP=y DRM_DP_HELPER=y DRM_KMS_HELPER=m which builds DP helpers into the kernel and KMS helpers sa a module. Making DRM_PANEL_EDP select DRM_KMS_HELPER resolves this problem. To avoid a resulting cyclic dependency with DRM_PANEL_BRIDGE, don't make the latter depend on DRM_KMS_HELPER and fix the one DRM bridge drivers that doesn't already select DRM_KMS_HELPER. As KMS helpers cannot be selected directly by the user, config symbols should avoid depending on it anyway. Signed-off-by: Thomas Zimmermann Fixes: 3755d35ee1d2 ("drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP") Acked-by: Sam Ravnborg Tested-by: Brian Masney Reported-by: kernel test robot Cc: Thomas Zimmermann Cc: Naresh Kamboju Cc: Linux Kernel Functional Testing Cc: Lyude Paul Cc: Sam Ravnborg Cc: Daniel Vetter Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie Cc: Thierry Reding Link: https://patchwork.freedesktop.org/patch/478296/ --- drivers/gpu/drm/bridge/Kconfig | 2 +- drivers/gpu/drm/panel/Kconfig | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 61db5a66b493..44ad70939663 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -8,7 +8,6 @@ config DRM_BRIDGE config DRM_PANEL_BRIDGE def_bool y depends on DRM_BRIDGE - depends on DRM_KMS_HELPER select DRM_PANEL help DRM bridge wrapper of DRM panels @@ -30,6 +29,7 @@ config DRM_CDNS_DSI config DRM_CHIPONE_ICN6211 tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge" depends on OF + select DRM_KMS_HELPER select DRM_MIPI_DSI select DRM_PANEL_BRIDGE help diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 0aec5a10b064..9989a316fe88 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -107,6 +107,7 @@ config DRM_PANEL_EDP select VIDEOMODE_HELPERS select DRM_DP_AUX_BUS select DRM_DP_HELPER + select DRM_KMS_HELPER help DRM panel driver for dumb eDP panels that need at most a regulator and a GPIO to be powered up. Optionally a backlight can be attached so -- cgit v1.2.3