From ca632f556697d45d67ed5cada7cedf3ddfe0db4b Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 6 Jun 2011 01:16:30 -0600 Subject: spi: reorganize drivers Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely Acked-by: Wolfram Sang Acked-by: Linus Walleij --- drivers/spi/Kconfig | 18 - drivers/spi/Makefile | 112 +- drivers/spi/amba-pl022.c | 2344 --------------------------------------- drivers/spi/ath79_spi.c | 292 ----- drivers/spi/atmel_spi.c | 940 ---------------- drivers/spi/atmel_spi.h | 167 --- drivers/spi/au1550_spi.c | 1032 ----------------- drivers/spi/coldfire_qspi.c | 642 ----------- drivers/spi/davinci_spi.c | 1030 ----------------- drivers/spi/dw_spi.c | 936 ---------------- drivers/spi/dw_spi.h | 232 ---- drivers/spi/dw_spi_mid.c | 224 ---- drivers/spi/dw_spi_mmio.c | 151 --- drivers/spi/dw_spi_pci.c | 181 --- drivers/spi/ep93xx_spi.c | 938 ---------------- drivers/spi/mpc512x_psc_spi.c | 577 ---------- drivers/spi/mpc52xx_psc_spi.c | 529 --------- drivers/spi/mpc52xx_spi.c | 579 ---------- drivers/spi/omap2_mcspi.c | 1293 --------------------- drivers/spi/omap_spi_100k.c | 637 ----------- drivers/spi/omap_uwire.c | 593 ---------- drivers/spi/orion_spi.c | 573 ---------- drivers/spi/pxa2xx_spi.c | 1816 ------------------------------ drivers/spi/pxa2xx_spi_pci.c | 180 --- drivers/spi/spi-altera.c | 339 ++++++ drivers/spi/spi-ath79.c | 292 +++++ drivers/spi/spi-atmel.c | 1093 ++++++++++++++++++ drivers/spi/spi-au1550.c | 1032 +++++++++++++++++ drivers/spi/spi-bfin-sport.c | 952 ++++++++++++++++ drivers/spi/spi-bfin5xx.c | 1530 +++++++++++++++++++++++++ drivers/spi/spi-bitbang-txrx.h | 97 ++ drivers/spi/spi-bitbang.c | 505 +++++++++ drivers/spi/spi-butterfly.c | 356 ++++++ drivers/spi/spi-coldfire-qspi.c | 642 +++++++++++ drivers/spi/spi-davinci.c | 1030 +++++++++++++++++ drivers/spi/spi-dw-mid.c | 224 ++++ drivers/spi/spi-dw-mmio.c | 151 +++ drivers/spi/spi-dw-pci.c | 181 +++ drivers/spi/spi-dw.c | 936 ++++++++++++++++ drivers/spi/spi-dw.h | 232 ++++ drivers/spi/spi-ep93xx.c | 938 ++++++++++++++++ drivers/spi/spi-fsl-espi.c | 762 +++++++++++++ drivers/spi/spi-fsl-lib.c | 236 ++++ drivers/spi/spi-fsl-lib.h | 123 ++ drivers/spi/spi-fsl-spi.c | 1192 ++++++++++++++++++++ drivers/spi/spi-gpio.c | 429 +++++++ drivers/spi/spi-imx.c | 944 ++++++++++++++++ drivers/spi/spi-lm70llp.c | 351 ++++++ drivers/spi/spi-mpc512x-psc.c | 577 ++++++++++ drivers/spi/spi-mpc52xx-psc.c | 529 +++++++++ drivers/spi/spi-mpc52xx.c | 579 ++++++++++ drivers/spi/spi-nuc900.c | 504 +++++++++ drivers/spi/spi-oc-tiny.c | 425 +++++++ drivers/spi/spi-omap-100k.c | 637 +++++++++++ drivers/spi/spi-omap-uwire.c | 593 ++++++++++ drivers/spi/spi-omap2-mcspi.c | 1293 +++++++++++++++++++++ drivers/spi/spi-orion.c | 573 ++++++++++ drivers/spi/spi-pl022.c | 2342 ++++++++++++++++++++++++++++++++++++++ drivers/spi/spi-ppc4xx.c | 612 ++++++++++ drivers/spi/spi-pxa2xx-pci.c | 180 +++ drivers/spi/spi-pxa2xx.c | 1816 ++++++++++++++++++++++++++++++ drivers/spi/spi-s3c24xx-fiq.S | 116 ++ drivers/spi/spi-s3c24xx-fiq.h | 26 + drivers/spi/spi-s3c24xx-gpio.c | 200 ++++ drivers/spi/spi-s3c24xx.c | 745 +++++++++++++ drivers/spi/spi-s3c64xx.c | 1247 +++++++++++++++++++++ drivers/spi/spi-sh-msiof.c | 749 +++++++++++++ drivers/spi/spi-sh-sci.c | 205 ++++ drivers/spi/spi-sh.c | 543 +++++++++ drivers/spi/spi-stmp.c | 679 ++++++++++++ drivers/spi/spi-tegra.c | 618 +++++++++++ drivers/spi/spi-ti-ssp.c | 402 +++++++ drivers/spi/spi-tle62x0.c | 334 ++++++ drivers/spi/spi-topcliff-pch.c | 1303 ++++++++++++++++++++++ drivers/spi/spi-txx9.c | 472 ++++++++ drivers/spi/spi-xilinx.c | 556 ++++++++++ drivers/spi/spi.c | 2 +- drivers/spi/spi_altera.c | 339 ------ drivers/spi/spi_bfin5xx.c | 1530 ------------------------- drivers/spi/spi_bfin_sport.c | 952 ---------------- drivers/spi/spi_bitbang.c | 505 --------- drivers/spi/spi_bitbang_txrx.h | 97 -- drivers/spi/spi_butterfly.c | 356 ------ drivers/spi/spi_fsl_espi.c | 762 ------------- drivers/spi/spi_fsl_lib.c | 236 ---- drivers/spi/spi_fsl_lib.h | 123 -- drivers/spi/spi_fsl_spi.c | 1192 -------------------- drivers/spi/spi_gpio.c | 429 ------- drivers/spi/spi_imx.c | 944 ---------------- drivers/spi/spi_lm70llp.c | 351 ------ drivers/spi/spi_nuc900.c | 505 --------- drivers/spi/spi_oc_tiny.c | 425 ------- drivers/spi/spi_ppc4xx.c | 612 ---------- drivers/spi/spi_s3c24xx.c | 746 ------------- drivers/spi/spi_s3c24xx_fiq.S | 116 -- drivers/spi/spi_s3c24xx_fiq.h | 26 - drivers/spi/spi_s3c24xx_gpio.c | 201 ---- drivers/spi/spi_s3c64xx.c | 1248 --------------------- drivers/spi/spi_sh.c | 543 --------- drivers/spi/spi_sh_msiof.c | 749 ------------- drivers/spi/spi_sh_sci.c | 205 ---- drivers/spi/spi_stmp.c | 679 ------------ drivers/spi/spi_tegra.c | 618 ----------- drivers/spi/spi_topcliff_pch.c | 1303 ---------------------- drivers/spi/spi_txx9.c | 472 -------- drivers/spi/spidev.c | 2 +- drivers/spi/ti-ssp-spi.c | 402 ------- drivers/spi/tle62x0.c | 334 ------ drivers/spi/xilinx_spi.c | 556 ---------- 109 files changed, 33474 insertions(+), 33524 deletions(-) delete mode 100644 drivers/spi/amba-pl022.c delete mode 100644 drivers/spi/ath79_spi.c delete mode 100644 drivers/spi/atmel_spi.c delete mode 100644 drivers/spi/atmel_spi.h delete mode 100644 drivers/spi/au1550_spi.c delete mode 100644 drivers/spi/coldfire_qspi.c delete mode 100644 drivers/spi/davinci_spi.c delete mode 100644 drivers/spi/dw_spi.c delete mode 100644 drivers/spi/dw_spi.h delete mode 100644 drivers/spi/dw_spi_mid.c delete mode 100644 drivers/spi/dw_spi_mmio.c delete mode 100644 drivers/spi/dw_spi_pci.c delete mode 100644 drivers/spi/ep93xx_spi.c delete mode 100644 drivers/spi/mpc512x_psc_spi.c delete mode 100644 drivers/spi/mpc52xx_psc_spi.c delete mode 100644 drivers/spi/mpc52xx_spi.c delete mode 100644 drivers/spi/omap2_mcspi.c delete mode 100644 drivers/spi/omap_spi_100k.c delete mode 100644 drivers/spi/omap_uwire.c delete mode 100644 drivers/spi/orion_spi.c delete mode 100644 drivers/spi/pxa2xx_spi.c delete mode 100644 drivers/spi/pxa2xx_spi_pci.c create mode 100644 drivers/spi/spi-altera.c create mode 100644 drivers/spi/spi-ath79.c create mode 100644 drivers/spi/spi-atmel.c create mode 100644 drivers/spi/spi-au1550.c create mode 100644 drivers/spi/spi-bfin-sport.c create mode 100644 drivers/spi/spi-bfin5xx.c create mode 100644 drivers/spi/spi-bitbang-txrx.h create mode 100644 drivers/spi/spi-bitbang.c create mode 100644 drivers/spi/spi-butterfly.c create mode 100644 drivers/spi/spi-coldfire-qspi.c create mode 100644 drivers/spi/spi-davinci.c create mode 100644 drivers/spi/spi-dw-mid.c create mode 100644 drivers/spi/spi-dw-mmio.c create mode 100644 drivers/spi/spi-dw-pci.c create mode 100644 drivers/spi/spi-dw.c create mode 100644 drivers/spi/spi-dw.h create mode 100644 drivers/spi/spi-ep93xx.c create mode 100644 drivers/spi/spi-fsl-espi.c create mode 100644 drivers/spi/spi-fsl-lib.c create mode 100644 drivers/spi/spi-fsl-lib.h create mode 100644 drivers/spi/spi-fsl-spi.c create mode 100644 drivers/spi/spi-gpio.c create mode 100644 drivers/spi/spi-imx.c create mode 100644 drivers/spi/spi-lm70llp.c create mode 100644 drivers/spi/spi-mpc512x-psc.c create mode 100644 drivers/spi/spi-mpc52xx-psc.c create mode 100644 drivers/spi/spi-mpc52xx.c create mode 100644 drivers/spi/spi-nuc900.c create mode 100644 drivers/spi/spi-oc-tiny.c create mode 100644 drivers/spi/spi-omap-100k.c create mode 100644 drivers/spi/spi-omap-uwire.c create mode 100644 drivers/spi/spi-omap2-mcspi.c create mode 100644 drivers/spi/spi-orion.c create mode 100644 drivers/spi/spi-pl022.c create mode 100644 drivers/spi/spi-ppc4xx.c create mode 100644 drivers/spi/spi-pxa2xx-pci.c create mode 100644 drivers/spi/spi-pxa2xx.c create mode 100644 drivers/spi/spi-s3c24xx-fiq.S create mode 100644 drivers/spi/spi-s3c24xx-fiq.h create mode 100644 drivers/spi/spi-s3c24xx-gpio.c create mode 100644 drivers/spi/spi-s3c24xx.c create mode 100644 drivers/spi/spi-s3c64xx.c create mode 100644 drivers/spi/spi-sh-msiof.c create mode 100644 drivers/spi/spi-sh-sci.c create mode 100644 drivers/spi/spi-sh.c create mode 100644 drivers/spi/spi-stmp.c create mode 100644 drivers/spi/spi-tegra.c create mode 100644 drivers/spi/spi-ti-ssp.c create mode 100644 drivers/spi/spi-tle62x0.c create mode 100644 drivers/spi/spi-topcliff-pch.c create mode 100644 drivers/spi/spi-txx9.c create mode 100644 drivers/spi/spi-xilinx.c delete mode 100644 drivers/spi/spi_altera.c delete mode 100644 drivers/spi/spi_bfin5xx.c delete mode 100644 drivers/spi/spi_bfin_sport.c delete mode 100644 drivers/spi/spi_bitbang.c delete mode 100644 drivers/spi/spi_bitbang_txrx.h delete mode 100644 drivers/spi/spi_butterfly.c delete mode 100644 drivers/spi/spi_fsl_espi.c delete mode 100644 drivers/spi/spi_fsl_lib.c delete mode 100644 drivers/spi/spi_fsl_lib.h delete mode 100644 drivers/spi/spi_fsl_spi.c delete mode 100644 drivers/spi/spi_gpio.c delete mode 100644 drivers/spi/spi_imx.c delete mode 100644 drivers/spi/spi_lm70llp.c delete mode 100644 drivers/spi/spi_nuc900.c delete mode 100644 drivers/spi/spi_oc_tiny.c delete mode 100644 drivers/spi/spi_ppc4xx.c delete mode 100644 drivers/spi/spi_s3c24xx.c delete mode 100644 drivers/spi/spi_s3c24xx_fiq.S delete mode 100644 drivers/spi/spi_s3c24xx_fiq.h delete mode 100644 drivers/spi/spi_s3c24xx_gpio.c delete mode 100644 drivers/spi/spi_s3c64xx.c delete mode 100644 drivers/spi/spi_sh.c delete mode 100644 drivers/spi/spi_sh_msiof.c delete mode 100644 drivers/spi/spi_sh_sci.c delete mode 100644 drivers/spi/spi_stmp.c delete mode 100644 drivers/spi/spi_tegra.c delete mode 100644 drivers/spi/spi_topcliff_pch.c delete mode 100644 drivers/spi/spi_txx9.c delete mode 100644 drivers/spi/ti-ssp-spi.c delete mode 100644 drivers/spi/tle62x0.c delete mode 100644 drivers/spi/xilinx_spi.c (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index de35c3ad8a69..9578a8492012 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -86,9 +86,6 @@ config SPI_BFIN_SPORT help Enable support for a SPI bus via the Blackfin SPORT peripheral. - This driver can also be built as a module. If so, the module - will be called spi_bfin_sport. - config SPI_AU1550 tristate "Au1550/Au12x0 SPI Controller" depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL @@ -97,9 +94,6 @@ config SPI_AU1550 If you say yes to this option, support will be included for the Au1550 SPI controller (may also work with Au1200,Au1210,Au1250). - This driver can also be built as a module. If so, the module - will be called au1550_spi. - config SPI_BITBANG tristate "Utilities for Bitbanging SPI masters" help @@ -130,9 +124,6 @@ config SPI_COLDFIRE_QSPI This enables support for the Coldfire QSPI controller in master mode. - This driver can also be built as a module. If so, the module - will be called coldfire_qspi. - config SPI_DAVINCI tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller" depends on SPI_MASTER && ARCH_DAVINCI @@ -140,9 +131,6 @@ config SPI_DAVINCI help SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules. - This driver can also be built as a module. The module will be called - davinci_spi. - config SPI_EP93XX tristate "Cirrus Logic EP93xx SPI controller" depends on ARCH_EP93XX @@ -150,9 +138,6 @@ config SPI_EP93XX This enables using the Cirrus EP93xx SPI controller in master mode. - To compile this driver as a module, choose M here. The module will be - called ep93xx_spi. - config SPI_GPIO tristate "GPIO-based bitbanging SPI Master" depends on GENERIC_GPIO @@ -385,9 +370,6 @@ config SPI_TI_SSP This selects an SPI master implementation using a TI sequencer serial port. - To compile this driver as a module, choose M here: the - module will be called ti-ssp-spi. - config SPI_TOPCLIFF_PCH tristate "Topcliff PCH SPI Controller" depends on PCI diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 0f8c69b6b19e..b60b04befee0 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -7,68 +7,56 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG # small core, mostly translating board-specific # config declarations into driver model code obj-$(CONFIG_SPI_MASTER) += spi.o +obj-$(CONFIG_SPI_SPIDEV) += spidev.o # SPI master controller drivers (bus) -obj-$(CONFIG_SPI_ALTERA) += spi_altera.o -obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o -obj-$(CONFIG_SPI_ATH79) += ath79_spi.o -obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o -obj-$(CONFIG_SPI_BFIN_SPORT) += spi_bfin_sport.o -obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o -obj-$(CONFIG_SPI_AU1550) += au1550_spi.o -obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o -obj-$(CONFIG_SPI_COLDFIRE_QSPI) += coldfire_qspi.o -obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o -obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o -obj-$(CONFIG_SPI_DW_PCI) += dw_spi_midpci.o -dw_spi_midpci-objs := dw_spi_pci.o dw_spi_mid.o -obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o -obj-$(CONFIG_SPI_EP93XX) += ep93xx_spi.o -obj-$(CONFIG_SPI_GPIO) += spi_gpio.o -obj-$(CONFIG_SPI_IMX) += spi_imx.o -obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o -obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o -obj-$(CONFIG_SPI_PXA2XX_PCI) += pxa2xx_spi_pci.o -obj-$(CONFIG_SPI_OC_TINY) += spi_oc_tiny.o -obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o -obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o -obj-$(CONFIG_SPI_OMAP_100K) += omap_spi_100k.o -obj-$(CONFIG_SPI_ORION) += orion_spi.o -obj-$(CONFIG_SPI_PL022) += amba-pl022.o -obj-$(CONFIG_SPI_MPC512x_PSC) += mpc512x_psc_spi.o -obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o -obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o -obj-$(CONFIG_SPI_FSL_LIB) += spi_fsl_lib.o -obj-$(CONFIG_SPI_FSL_ESPI) += spi_fsl_espi.o -obj-$(CONFIG_SPI_FSL_SPI) += spi_fsl_spi.o -obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o -obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o -obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o -obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o -obj-$(CONFIG_SPI_TEGRA) += spi_tegra.o -obj-$(CONFIG_SPI_TI_SSP) += ti-ssp-spi.o -obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi_topcliff_pch.o -obj-$(CONFIG_SPI_TXX9) += spi_txx9.o -obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o -obj-$(CONFIG_SPI_SH) += spi_sh.o -obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o -obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o -obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o -obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o +obj-$(CONFIG_SPI_ALTERA) += spi-altera.o +obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o +obj-$(CONFIG_SPI_ATH79) += spi-ath79.o +obj-$(CONFIG_SPI_AU1550) += spi-au1550.o +obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o +obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o +obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o +obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o +obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o +obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o +obj-$(CONFIG_SPI_DESIGNWARE) += spi-dw.o +obj-$(CONFIG_SPI_DW_MMIO) += spi-dw-mmio.o +obj-$(CONFIG_SPI_DW_PCI) += spi-dw-midpci.o +spi-dw-midpci-objs := spi-dw-pci.o spi-dw-mid.o +obj-$(CONFIG_SPI_EP93XX) += spi-ep93xx.o +obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-lib.o +obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o +obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o +obj-$(CONFIG_SPI_GPIO) += spi-gpio.o +obj-$(CONFIG_SPI_IMX) += spi-imx.o +obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o +obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o +obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o +obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o +obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o +obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o +obj-$(CONFIG_SPI_OMAP_UWIRE) += spi-omap-uwire.o +obj-$(CONFIG_SPI_OMAP_100K) += spi-omap-100k.o +obj-$(CONFIG_SPI_OMAP24XX) += spi-omap2-mcspi.o +obj-$(CONFIG_SPI_ORION) += spi-orion.o +obj-$(CONFIG_SPI_PL022) += spi-pl022.o +obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o +obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o +obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o +obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi-s3c24xx-gpio.o +obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o +spi-s3c24xx-hw-y := spi-s3c24xx.o +spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o +obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o +obj-$(CONFIG_SPI_SH) += spi-sh.o +obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o +obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o +obj-$(CONFIG_SPI_STMP3XXX) += spi-stmp.o +obj-$(CONFIG_SPI_TEGRA) += spi-tegra.o +obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.o +obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o +obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o +obj-$(CONFIG_SPI_TXX9) += spi-txx9.o +obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o -# special build for s3c24xx spi driver with fiq support -spi_s3c24xx_hw-y := spi_s3c24xx.o -spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi_s3c24xx_fiq.o - -# ... add above this line ... - -# SPI protocol drivers (device/link on bus) -obj-$(CONFIG_SPI_SPIDEV) += spidev.o -obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o -# ... add above this line ... - -# SPI slave controller drivers (upstream link) -# ... add above this line ... - -# SPI slave drivers (protocol for that link) -# ... add above this line ... diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c deleted file mode 100644 index 6a9e58dd36c7..000000000000 --- a/drivers/spi/amba-pl022.c +++ /dev/null @@ -1,2344 +0,0 @@ -/* - * drivers/spi/amba-pl022.c - * - * A driver for the ARM PL022 PrimeCell SSP/SPI bus master. - * - * Copyright (C) 2008-2009 ST-Ericsson AB - * Copyright (C) 2006 STMicroelectronics Pvt. Ltd. - * - * Author: Linus Walleij - * - * Initial version inspired by: - * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c - * Initial adoption to PL022 by: - * Sachin Verma - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * This macro is used to define some register default values. - * reg is masked with mask, the OR:ed with an (again masked) - * val shifted sb steps to the left. - */ -#define SSP_WRITE_BITS(reg, val, mask, sb) \ - ((reg) = (((reg) & ~(mask)) | (((val)<<(sb)) & (mask)))) - -/* - * This macro is also used to define some default values. - * It will just shift val by sb steps to the left and mask - * the result with mask. - */ -#define GEN_MASK_BITS(val, mask, sb) \ - (((val)<<(sb)) & (mask)) - -#define DRIVE_TX 0 -#define DO_NOT_DRIVE_TX 1 - -#define DO_NOT_QUEUE_DMA 0 -#define QUEUE_DMA 1 - -#define RX_TRANSFER 1 -#define TX_TRANSFER 2 - -/* - * Macros to access SSP Registers with their offsets - */ -#define SSP_CR0(r) (r + 0x000) -#define SSP_CR1(r) (r + 0x004) -#define SSP_DR(r) (r + 0x008) -#define SSP_SR(r) (r + 0x00C) -#define SSP_CPSR(r) (r + 0x010) -#define SSP_IMSC(r) (r + 0x014) -#define SSP_RIS(r) (r + 0x018) -#define SSP_MIS(r) (r + 0x01C) -#define SSP_ICR(r) (r + 0x020) -#define SSP_DMACR(r) (r + 0x024) -#define SSP_ITCR(r) (r + 0x080) -#define SSP_ITIP(r) (r + 0x084) -#define SSP_ITOP(r) (r + 0x088) -#define SSP_TDR(r) (r + 0x08C) - -#define SSP_PID0(r) (r + 0xFE0) -#define SSP_PID1(r) (r + 0xFE4) -#define SSP_PID2(r) (r + 0xFE8) -#define SSP_PID3(r) (r + 0xFEC) - -#define SSP_CID0(r) (r + 0xFF0) -#define SSP_CID1(r) (r + 0xFF4) -#define SSP_CID2(r) (r + 0xFF8) -#define SSP_CID3(r) (r + 0xFFC) - -/* - * SSP Control Register 0 - SSP_CR0 - */ -#define SSP_CR0_MASK_DSS (0x0FUL << 0) -#define SSP_CR0_MASK_FRF (0x3UL << 4) -#define SSP_CR0_MASK_SPO (0x1UL << 6) -#define SSP_CR0_MASK_SPH (0x1UL << 7) -#define SSP_CR0_MASK_SCR (0xFFUL << 8) - -/* - * The ST version of this block moves som bits - * in SSP_CR0 and extends it to 32 bits - */ -#define SSP_CR0_MASK_DSS_ST (0x1FUL << 0) -#define SSP_CR0_MASK_HALFDUP_ST (0x1UL << 5) -#define SSP_CR0_MASK_CSS_ST (0x1FUL << 16) -#define SSP_CR0_MASK_FRF_ST (0x3UL << 21) - - -/* - * SSP Control Register 0 - SSP_CR1 - */ -#define SSP_CR1_MASK_LBM (0x1UL << 0) -#define SSP_CR1_MASK_SSE (0x1UL << 1) -#define SSP_CR1_MASK_MS (0x1UL << 2) -#define SSP_CR1_MASK_SOD (0x1UL << 3) - -/* - * The ST version of this block adds some bits - * in SSP_CR1 - */ -#define SSP_CR1_MASK_RENDN_ST (0x1UL << 4) -#define SSP_CR1_MASK_TENDN_ST (0x1UL << 5) -#define SSP_CR1_MASK_MWAIT_ST (0x1UL << 6) -#define SSP_CR1_MASK_RXIFLSEL_ST (0x7UL << 7) -#define SSP_CR1_MASK_TXIFLSEL_ST (0x7UL << 10) -/* This one is only in the PL023 variant */ -#define SSP_CR1_MASK_FBCLKDEL_ST (0x7UL << 13) - -/* - * SSP Status Register - SSP_SR - */ -#define SSP_SR_MASK_TFE (0x1UL << 0) /* Transmit FIFO empty */ -#define SSP_SR_MASK_TNF (0x1UL << 1) /* Transmit FIFO not full */ -#define SSP_SR_MASK_RNE (0x1UL << 2) /* Receive FIFO not empty */ -#define SSP_SR_MASK_RFF (0x1UL << 3) /* Receive FIFO full */ -#define SSP_SR_MASK_BSY (0x1UL << 4) /* Busy Flag */ - -/* - * SSP Clock Prescale Register - SSP_CPSR - */ -#define SSP_CPSR_MASK_CPSDVSR (0xFFUL << 0) - -/* - * SSP Interrupt Mask Set/Clear Register - SSP_IMSC - */ -#define SSP_IMSC_MASK_RORIM (0x1UL << 0) /* Receive Overrun Interrupt mask */ -#define SSP_IMSC_MASK_RTIM (0x1UL << 1) /* Receive timeout Interrupt mask */ -#define SSP_IMSC_MASK_RXIM (0x1UL << 2) /* Receive FIFO Interrupt mask */ -#define SSP_IMSC_MASK_TXIM (0x1UL << 3) /* Transmit FIFO Interrupt mask */ - -/* - * SSP Raw Interrupt Status Register - SSP_RIS - */ -/* Receive Overrun Raw Interrupt status */ -#define SSP_RIS_MASK_RORRIS (0x1UL << 0) -/* Receive Timeout Raw Interrupt status */ -#define SSP_RIS_MASK_RTRIS (0x1UL << 1) -/* Receive FIFO Raw Interrupt status */ -#define SSP_RIS_MASK_RXRIS (0x1UL << 2) -/* Transmit FIFO Raw Interrupt status */ -#define SSP_RIS_MASK_TXRIS (0x1UL << 3) - -/* - * SSP Masked Interrupt Status Register - SSP_MIS - */ -/* Receive Overrun Masked Interrupt status */ -#define SSP_MIS_MASK_RORMIS (0x1UL << 0) -/* Receive Timeout Masked Interrupt status */ -#define SSP_MIS_MASK_RTMIS (0x1UL << 1) -/* Receive FIFO Masked Interrupt status */ -#define SSP_MIS_MASK_RXMIS (0x1UL << 2) -/* Transmit FIFO Masked Interrupt status */ -#define SSP_MIS_MASK_TXMIS (0x1UL << 3) - -/* - * SSP Interrupt Clear Register - SSP_ICR - */ -/* Receive Overrun Raw Clear Interrupt bit */ -#define SSP_ICR_MASK_RORIC (0x1UL << 0) -/* Receive Timeout Clear Interrupt bit */ -#define SSP_ICR_MASK_RTIC (0x1UL << 1) - -/* - * SSP DMA Control Register - SSP_DMACR - */ -/* Receive DMA Enable bit */ -#define SSP_DMACR_MASK_RXDMAE (0x1UL << 0) -/* Transmit DMA Enable bit */ -#define SSP_DMACR_MASK_TXDMAE (0x1UL << 1) - -/* - * SSP Integration Test control Register - SSP_ITCR - */ -#define SSP_ITCR_MASK_ITEN (0x1UL << 0) -#define SSP_ITCR_MASK_TESTFIFO (0x1UL << 1) - -/* - * SSP Integration Test Input Register - SSP_ITIP - */ -#define ITIP_MASK_SSPRXD (0x1UL << 0) -#define ITIP_MASK_SSPFSSIN (0x1UL << 1) -#define ITIP_MASK_SSPCLKIN (0x1UL << 2) -#define ITIP_MASK_RXDMAC (0x1UL << 3) -#define ITIP_MASK_TXDMAC (0x1UL << 4) -#define ITIP_MASK_SSPTXDIN (0x1UL << 5) - -/* - * SSP Integration Test output Register - SSP_ITOP - */ -#define ITOP_MASK_SSPTXD (0x1UL << 0) -#define ITOP_MASK_SSPFSSOUT (0x1UL << 1) -#define ITOP_MASK_SSPCLKOUT (0x1UL << 2) -#define ITOP_MASK_SSPOEn (0x1UL << 3) -#define ITOP_MASK_SSPCTLOEn (0x1UL << 4) -#define ITOP_MASK_RORINTR (0x1UL << 5) -#define ITOP_MASK_RTINTR (0x1UL << 6) -#define ITOP_MASK_RXINTR (0x1UL << 7) -#define ITOP_MASK_TXINTR (0x1UL << 8) -#define ITOP_MASK_INTR (0x1UL << 9) -#define ITOP_MASK_RXDMABREQ (0x1UL << 10) -#define ITOP_MASK_RXDMASREQ (0x1UL << 11) -#define ITOP_MASK_TXDMABREQ (0x1UL << 12) -#define ITOP_MASK_TXDMASREQ (0x1UL << 13) - -/* - * SSP Test Data Register - SSP_TDR - */ -#define TDR_MASK_TESTDATA (0xFFFFFFFF) - -/* - * Message State - * we use the spi_message.state (void *) pointer to - * hold a single state value, that's why all this - * (void *) casting is done here. - */ -#define STATE_START ((void *) 0) -#define STATE_RUNNING ((void *) 1) -#define STATE_DONE ((void *) 2) -#define STATE_ERROR ((void *) -1) - -/* - * SSP State - Whether Enabled or Disabled - */ -#define SSP_DISABLED (0) -#define SSP_ENABLED (1) - -/* - * SSP DMA State - Whether DMA Enabled or Disabled - */ -#define SSP_DMA_DISABLED (0) -#define SSP_DMA_ENABLED (1) - -/* - * SSP Clock Defaults - */ -#define SSP_DEFAULT_CLKRATE 0x2 -#define SSP_DEFAULT_PRESCALE 0x40 - -/* - * SSP Clock Parameter ranges - */ -#define CPSDVR_MIN 0x02 -#define CPSDVR_MAX 0xFE -#define SCR_MIN 0x00 -#define SCR_MAX 0xFF - -/* - * SSP Interrupt related Macros - */ -#define DEFAULT_SSP_REG_IMSC 0x0UL -#define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC -#define ENABLE_ALL_INTERRUPTS (~DEFAULT_SSP_REG_IMSC) - -#define CLEAR_ALL_INTERRUPTS 0x3 - -#define SPI_POLLING_TIMEOUT 1000 - - -/* - * The type of reading going on on this chip - */ -enum ssp_reading { - READING_NULL, - READING_U8, - READING_U16, - READING_U32 -}; - -/** - * The type of writing going on on this chip - */ -enum ssp_writing { - WRITING_NULL, - WRITING_U8, - WRITING_U16, - WRITING_U32 -}; - -/** - * struct vendor_data - vendor-specific config parameters - * for PL022 derivates - * @fifodepth: depth of FIFOs (both) - * @max_bpw: maximum number of bits per word - * @unidir: supports unidirection transfers - * @extended_cr: 32 bit wide control register 0 with extra - * features and extra features in CR1 as found in the ST variants - * @pl023: supports a subset of the ST extensions called "PL023" - */ -struct vendor_data { - int fifodepth; - int max_bpw; - bool unidir; - bool extended_cr; - bool pl023; - bool loopback; -}; - -/** - * struct pl022 - This is the private SSP driver data structure - * @adev: AMBA device model hookup - * @vendor: vendor data for the IP block - * @phybase: the physical memory where the SSP device resides - * @virtbase: the virtual memory where the SSP is mapped - * @clk: outgoing clock "SPICLK" for the SPI bus - * @master: SPI framework hookup - * @master_info: controller-specific data from machine setup - * @workqueue: a workqueue on which any spi_message request is queued - * @pump_messages: work struct for scheduling work to the workqueue - * @queue_lock: spinlock to syncronise access to message queue - * @queue: message queue - * @busy: workqueue is busy - * @running: workqueue is running - * @pump_transfers: Tasklet used in Interrupt Transfer mode - * @cur_msg: Pointer to current spi_message being processed - * @cur_transfer: Pointer to current spi_transfer - * @cur_chip: pointer to current clients chip(assigned from controller_state) - * @tx: current position in TX buffer to be read - * @tx_end: end position in TX buffer to be read - * @rx: current position in RX buffer to be written - * @rx_end: end position in RX buffer to be written - * @read: the type of read currently going on - * @write: the type of write currently going on - * @exp_fifo_level: expected FIFO level - * @dma_rx_channel: optional channel for RX DMA - * @dma_tx_channel: optional channel for TX DMA - * @sgt_rx: scattertable for the RX transfer - * @sgt_tx: scattertable for the TX transfer - * @dummypage: a dummy page used for driving data on the bus with DMA - */ -struct pl022 { - struct amba_device *adev; - struct vendor_data *vendor; - resource_size_t phybase; - void __iomem *virtbase; - struct clk *clk; - struct spi_master *master; - struct pl022_ssp_controller *master_info; - /* Driver message queue */ - struct workqueue_struct *workqueue; - struct work_struct pump_messages; - spinlock_t queue_lock; - struct list_head queue; - bool busy; - bool running; - /* Message transfer pump */ - struct tasklet_struct pump_transfers; - struct spi_message *cur_msg; - struct spi_transfer *cur_transfer; - struct chip_data *cur_chip; - void *tx; - void *tx_end; - void *rx; - void *rx_end; - enum ssp_reading read; - enum ssp_writing write; - u32 exp_fifo_level; - /* DMA settings */ -#ifdef CONFIG_DMA_ENGINE - struct dma_chan *dma_rx_channel; - struct dma_chan *dma_tx_channel; - struct sg_table sgt_rx; - struct sg_table sgt_tx; - char *dummypage; -#endif -}; - -/** - * struct chip_data - To maintain runtime state of SSP for each client chip - * @cr0: Value of control register CR0 of SSP - on later ST variants this - * register is 32 bits wide rather than just 16 - * @cr1: Value of control register CR1 of SSP - * @dmacr: Value of DMA control Register of SSP - * @cpsr: Value of Clock prescale register - * @n_bytes: how many bytes(power of 2) reqd for a given data width of client - * @enable_dma: Whether to enable DMA or not - * @read: function ptr to be used to read when doing xfer for this chip - * @write: function ptr to be used to write when doing xfer for this chip - * @cs_control: chip select callback provided by chip - * @xfer_type: polling/interrupt/DMA - * - * Runtime state of the SSP controller, maintained per chip, - * This would be set according to the current message that would be served - */ -struct chip_data { - u32 cr0; - u16 cr1; - u16 dmacr; - u16 cpsr; - u8 n_bytes; - bool enable_dma; - enum ssp_reading read; - enum ssp_writing write; - void (*cs_control) (u32 command); - int xfer_type; -}; - -/** - * null_cs_control - Dummy chip select function - * @command: select/delect the chip - * - * If no chip select function is provided by client this is used as dummy - * chip select - */ -static void null_cs_control(u32 command) -{ - pr_debug("pl022: dummy chip select control, CS=0x%x\n", command); -} - -/** - * giveback - current spi_message is over, schedule next message and call - * callback of this message. Assumes that caller already - * set message->status; dma and pio irqs are blocked - * @pl022: SSP driver private data structure - */ -static void giveback(struct pl022 *pl022) -{ - struct spi_transfer *last_transfer; - unsigned long flags; - struct spi_message *msg; - void (*curr_cs_control) (u32 command); - - /* - * This local reference to the chip select function - * is needed because we set curr_chip to NULL - * as a step toward termininating the message. - */ - curr_cs_control = pl022->cur_chip->cs_control; - spin_lock_irqsave(&pl022->queue_lock, flags); - msg = pl022->cur_msg; - pl022->cur_msg = NULL; - pl022->cur_transfer = NULL; - pl022->cur_chip = NULL; - queue_work(pl022->workqueue, &pl022->pump_messages); - spin_unlock_irqrestore(&pl022->queue_lock, flags); - - last_transfer = list_entry(msg->transfers.prev, - struct spi_transfer, - transfer_list); - - /* Delay if requested before any change in chip select */ - if (last_transfer->delay_usecs) - /* - * FIXME: This runs in interrupt context. - * Is this really smart? - */ - udelay(last_transfer->delay_usecs); - - /* - * Drop chip select UNLESS cs_change is true or we are returning - * a message with an error, or next message is for another chip - */ - if (!last_transfer->cs_change) - curr_cs_control(SSP_CHIP_DESELECT); - else { - struct spi_message *next_msg; - - /* Holding of cs was hinted, but we need to make sure - * the next message is for the same chip. Don't waste - * time with the following tests unless this was hinted. - * - * We cannot postpone this until pump_messages, because - * after calling msg->complete (below) the driver that - * sent the current message could be unloaded, which - * could invalidate the cs_control() callback... - */ - - /* get a pointer to the next message, if any */ - spin_lock_irqsave(&pl022->queue_lock, flags); - if (list_empty(&pl022->queue)) - next_msg = NULL; - else - next_msg = list_entry(pl022->queue.next, - struct spi_message, queue); - spin_unlock_irqrestore(&pl022->queue_lock, flags); - - /* see if the next and current messages point - * to the same chip - */ - if (next_msg && next_msg->spi != msg->spi) - next_msg = NULL; - if (!next_msg || msg->state == STATE_ERROR) - curr_cs_control(SSP_CHIP_DESELECT); - } - msg->state = NULL; - if (msg->complete) - msg->complete(msg->context); - /* This message is completed, so let's turn off the clocks & power */ - clk_disable(pl022->clk); - amba_pclk_disable(pl022->adev); - amba_vcore_disable(pl022->adev); -} - -/** - * flush - flush the FIFO to reach a clean state - * @pl022: SSP driver private data structure - */ -static int flush(struct pl022 *pl022) -{ - unsigned long limit = loops_per_jiffy << 1; - - dev_dbg(&pl022->adev->dev, "flush\n"); - do { - while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE) - readw(SSP_DR(pl022->virtbase)); - } while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--); - - pl022->exp_fifo_level = 0; - - return limit; -} - -/** - * restore_state - Load configuration of current chip - * @pl022: SSP driver private data structure - */ -static void restore_state(struct pl022 *pl022) -{ - struct chip_data *chip = pl022->cur_chip; - - if (pl022->vendor->extended_cr) - writel(chip->cr0, SSP_CR0(pl022->virtbase)); - else - writew(chip->cr0, SSP_CR0(pl022->virtbase)); - writew(chip->cr1, SSP_CR1(pl022->virtbase)); - writew(chip->dmacr, SSP_DMACR(pl022->virtbase)); - writew(chip->cpsr, SSP_CPSR(pl022->virtbase)); - writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); - writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); -} - -/* - * Default SSP Register Values - */ -#define DEFAULT_SSP_REG_CR0 ( \ - GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0) | \ - GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 4) | \ - GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \ - GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \ - GEN_MASK_BITS(SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) \ -) - -/* ST versions have slightly different bit layout */ -#define DEFAULT_SSP_REG_CR0_ST ( \ - GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS_ST, 0) | \ - GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP_ST, 5) | \ - GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \ - GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \ - GEN_MASK_BITS(SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \ - GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS_ST, 16) | \ - GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF_ST, 21) \ -) - -/* The PL023 version is slightly different again */ -#define DEFAULT_SSP_REG_CR0_ST_PL023 ( \ - GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS_ST, 0) | \ - GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \ - GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \ - GEN_MASK_BITS(SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) \ -) - -#define DEFAULT_SSP_REG_CR1 ( \ - GEN_MASK_BITS(LOOPBACK_DISABLED, SSP_CR1_MASK_LBM, 0) | \ - GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \ - GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \ - GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) \ -) - -/* ST versions extend this register to use all 16 bits */ -#define DEFAULT_SSP_REG_CR1_ST ( \ - DEFAULT_SSP_REG_CR1 | \ - GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN_ST, 4) | \ - GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN_ST, 5) | \ - GEN_MASK_BITS(SSP_MWIRE_WAIT_ZERO, SSP_CR1_MASK_MWAIT_ST, 6) |\ - GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL_ST, 7) | \ - GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL_ST, 10) \ -) - -/* - * The PL023 variant has further differences: no loopback mode, no microwire - * support, and a new clock feedback delay setting. - */ -#define DEFAULT_SSP_REG_CR1_ST_PL023 ( \ - GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \ - GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \ - GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) | \ - GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN_ST, 4) | \ - GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN_ST, 5) | \ - GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL_ST, 7) | \ - GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL_ST, 10) | \ - GEN_MASK_BITS(SSP_FEEDBACK_CLK_DELAY_NONE, SSP_CR1_MASK_FBCLKDEL_ST, 13) \ -) - -#define DEFAULT_SSP_REG_CPSR ( \ - GEN_MASK_BITS(SSP_DEFAULT_PRESCALE, SSP_CPSR_MASK_CPSDVSR, 0) \ -) - -#define DEFAULT_SSP_REG_DMACR (\ - GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0) | \ - GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_TXDMAE, 1) \ -) - -/** - * load_ssp_default_config - Load default configuration for SSP - * @pl022: SSP driver private data structure - */ -static void load_ssp_default_config(struct pl022 *pl022) -{ - if (pl022->vendor->pl023) { - writel(DEFAULT_SSP_REG_CR0_ST_PL023, SSP_CR0(pl022->virtbase)); - writew(DEFAULT_SSP_REG_CR1_ST_PL023, SSP_CR1(pl022->virtbase)); - } else if (pl022->vendor->extended_cr) { - writel(DEFAULT_SSP_REG_CR0_ST, SSP_CR0(pl022->virtbase)); - writew(DEFAULT_SSP_REG_CR1_ST, SSP_CR1(pl022->virtbase)); - } else { - writew(DEFAULT_SSP_REG_CR0, SSP_CR0(pl022->virtbase)); - writew(DEFAULT_SSP_REG_CR1, SSP_CR1(pl022->virtbase)); - } - writew(DEFAULT_SSP_REG_DMACR, SSP_DMACR(pl022->virtbase)); - writew(DEFAULT_SSP_REG_CPSR, SSP_CPSR(pl022->virtbase)); - writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); - writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); -} - -/** - * This will write to TX and read from RX according to the parameters - * set in pl022. - */ -static void readwriter(struct pl022 *pl022) -{ - - /* - * The FIFO depth is different between primecell variants. - * I believe filling in too much in the FIFO might cause - * errons in 8bit wide transfers on ARM variants (just 8 words - * FIFO, means only 8x8 = 64 bits in FIFO) at least. - * - * To prevent this issue, the TX FIFO is only filled to the - * unused RX FIFO fill length, regardless of what the TX - * FIFO status flag indicates. - */ - dev_dbg(&pl022->adev->dev, - "%s, rx: %p, rxend: %p, tx: %p, txend: %p\n", - __func__, pl022->rx, pl022->rx_end, pl022->tx, pl022->tx_end); - - /* Read as much as you can */ - while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE) - && (pl022->rx < pl022->rx_end)) { - switch (pl022->read) { - case READING_NULL: - readw(SSP_DR(pl022->virtbase)); - break; - case READING_U8: - *(u8 *) (pl022->rx) = - readw(SSP_DR(pl022->virtbase)) & 0xFFU; - break; - case READING_U16: - *(u16 *) (pl022->rx) = - (u16) readw(SSP_DR(pl022->virtbase)); - break; - case READING_U32: - *(u32 *) (pl022->rx) = - readl(SSP_DR(pl022->virtbase)); - break; - } - pl022->rx += (pl022->cur_chip->n_bytes); - pl022->exp_fifo_level--; - } - /* - * Write as much as possible up to the RX FIFO size - */ - while ((pl022->exp_fifo_level < pl022->vendor->fifodepth) - && (pl022->tx < pl022->tx_end)) { - switch (pl022->write) { - case WRITING_NULL: - writew(0x0, SSP_DR(pl022->virtbase)); - break; - case WRITING_U8: - writew(*(u8 *) (pl022->tx), SSP_DR(pl022->virtbase)); - break; - case WRITING_U16: - writew((*(u16 *) (pl022->tx)), SSP_DR(pl022->virtbase)); - break; - case WRITING_U32: - writel(*(u32 *) (pl022->tx), SSP_DR(pl022->virtbase)); - break; - } - pl022->tx += (pl022->cur_chip->n_bytes); - pl022->exp_fifo_level++; - /* - * This inner reader takes care of things appearing in the RX - * FIFO as we're transmitting. This will happen a lot since the - * clock starts running when you put things into the TX FIFO, - * and then things are continuously clocked into the RX FIFO. - */ - while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE) - && (pl022->rx < pl022->rx_end)) { - switch (pl022->read) { - case READING_NULL: - readw(SSP_DR(pl022->virtbase)); - break; - case READING_U8: - *(u8 *) (pl022->rx) = - readw(SSP_DR(pl022->virtbase)) & 0xFFU; - break; - case READING_U16: - *(u16 *) (pl022->rx) = - (u16) readw(SSP_DR(pl022->virtbase)); - break; - case READING_U32: - *(u32 *) (pl022->rx) = - readl(SSP_DR(pl022->virtbase)); - break; - } - pl022->rx += (pl022->cur_chip->n_bytes); - pl022->exp_fifo_level--; - } - } - /* - * When we exit here the TX FIFO should be full and the RX FIFO - * should be empty - */ -} - - -/** - * next_transfer - Move to the Next transfer in the current spi message - * @pl022: SSP driver private data structure - * - * This function moves though the linked list of spi transfers in the - * current spi message and returns with the state of current spi - * message i.e whether its last transfer is done(STATE_DONE) or - * Next transfer is ready(STATE_RUNNING) - */ -static void *next_transfer(struct pl022 *pl022) -{ - struct spi_message *msg = pl022->cur_msg; - struct spi_transfer *trans = pl022->cur_transfer; - - /* Move to next transfer */ - if (trans->transfer_list.next != &msg->transfers) { - pl022->cur_transfer = - list_entry(trans->transfer_list.next, - struct spi_transfer, transfer_list); - return STATE_RUNNING; - } - return STATE_DONE; -} - -/* - * This DMA functionality is only compiled in if we have - * access to the generic DMA devices/DMA engine. - */ -#ifdef CONFIG_DMA_ENGINE -static void unmap_free_dma_scatter(struct pl022 *pl022) -{ - /* Unmap and free the SG tables */ - dma_unmap_sg(pl022->dma_tx_channel->device->dev, pl022->sgt_tx.sgl, - pl022->sgt_tx.nents, DMA_TO_DEVICE); - dma_unmap_sg(pl022->dma_rx_channel->device->dev, pl022->sgt_rx.sgl, - pl022->sgt_rx.nents, DMA_FROM_DEVICE); - sg_free_table(&pl022->sgt_rx); - sg_free_table(&pl022->sgt_tx); -} - -static void dma_callback(void *data) -{ - struct pl022 *pl022 = data; - struct spi_message *msg = pl022->cur_msg; - - BUG_ON(!pl022->sgt_rx.sgl); - -#ifdef VERBOSE_DEBUG - /* - * Optionally dump out buffers to inspect contents, this is - * good if you want to convince yourself that the loopback - * read/write contents are the same, when adopting to a new - * DMA engine. - */ - { - struct scatterlist *sg; - unsigned int i; - - dma_sync_sg_for_cpu(&pl022->adev->dev, - pl022->sgt_rx.sgl, - pl022->sgt_rx.nents, - DMA_FROM_DEVICE); - - for_each_sg(pl022->sgt_rx.sgl, sg, pl022->sgt_rx.nents, i) { - dev_dbg(&pl022->adev->dev, "SPI RX SG ENTRY: %d", i); - print_hex_dump(KERN_ERR, "SPI RX: ", - DUMP_PREFIX_OFFSET, - 16, - 1, - sg_virt(sg), - sg_dma_len(sg), - 1); - } - for_each_sg(pl022->sgt_tx.sgl, sg, pl022->sgt_tx.nents, i) { - dev_dbg(&pl022->adev->dev, "SPI TX SG ENTRY: %d", i); - print_hex_dump(KERN_ERR, "SPI TX: ", - DUMP_PREFIX_OFFSET, - 16, - 1, - sg_virt(sg), - sg_dma_len(sg), - 1); - } - } -#endif - - unmap_free_dma_scatter(pl022); - - /* Update total bytes transferred */ - msg->actual_length += pl022->cur_transfer->len; - if (pl022->cur_transfer->cs_change) - pl022->cur_chip-> - cs_control(SSP_CHIP_DESELECT); - - /* Move to next transfer */ - msg->state = next_transfer(pl022); - tasklet_schedule(&pl022->pump_transfers); -} - -static void setup_dma_scatter(struct pl022 *pl022, - void *buffer, - unsigned int length, - struct sg_table *sgtab) -{ - struct scatterlist *sg; - int bytesleft = length; - void *bufp = buffer; - int mapbytes; - int i; - - if (buffer) { - for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { - /* - * If there are less bytes left than what fits - * in the current page (plus page alignment offset) - * we just feed in this, else we stuff in as much - * as we can. - */ - if (bytesleft < (PAGE_SIZE - offset_in_page(bufp))) - mapbytes = bytesleft; - else - mapbytes = PAGE_SIZE - offset_in_page(bufp); - sg_set_page(sg, virt_to_page(bufp), - mapbytes, offset_in_page(bufp)); - bufp += mapbytes; - bytesleft -= mapbytes; - dev_dbg(&pl022->adev->dev, - "set RX/TX target page @ %p, %d bytes, %d left\n", - bufp, mapbytes, bytesleft); - } - } else { - /* Map the dummy buffer on every page */ - for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { - if (bytesleft < PAGE_SIZE) - mapbytes = bytesleft; - else - mapbytes = PAGE_SIZE; - sg_set_page(sg, virt_to_page(pl022->dummypage), - mapbytes, 0); - bytesleft -= mapbytes; - dev_dbg(&pl022->adev->dev, - "set RX/TX to dummy page %d bytes, %d left\n", - mapbytes, bytesleft); - - } - } - BUG_ON(bytesleft); -} - -/** - * configure_dma - configures the channels for the next transfer - * @pl022: SSP driver's private data structure - */ -static int configure_dma(struct pl022 *pl022) -{ - struct dma_slave_config rx_conf = { - .src_addr = SSP_DR(pl022->phybase), - .direction = DMA_FROM_DEVICE, - .src_maxburst = pl022->vendor->fifodepth >> 1, - }; - struct dma_slave_config tx_conf = { - .dst_addr = SSP_DR(pl022->phybase), - .direction = DMA_TO_DEVICE, - .dst_maxburst = pl022->vendor->fifodepth >> 1, - }; - unsigned int pages; - int ret; - int rx_sglen, tx_sglen; - struct dma_chan *rxchan = pl022->dma_rx_channel; - struct dma_chan *txchan = pl022->dma_tx_channel; - struct dma_async_tx_descriptor *rxdesc; - struct dma_async_tx_descriptor *txdesc; - - /* Check that the channels are available */ - if (!rxchan || !txchan) - return -ENODEV; - - switch (pl022->read) { - case READING_NULL: - /* Use the same as for writing */ - rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; - break; - case READING_U8: - rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; - break; - case READING_U16: - rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; - break; - case READING_U32: - rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - break; - } - - switch (pl022->write) { - case WRITING_NULL: - /* Use the same as for reading */ - tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; - break; - case WRITING_U8: - tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; - break; - case WRITING_U16: - tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; - break; - case WRITING_U32: - tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - break; - } - - /* SPI pecularity: we need to read and write the same width */ - if (rx_conf.src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) - rx_conf.src_addr_width = tx_conf.dst_addr_width; - if (tx_conf.dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) - tx_conf.dst_addr_width = rx_conf.src_addr_width; - BUG_ON(rx_conf.src_addr_width != tx_conf.dst_addr_width); - - dmaengine_slave_config(rxchan, &rx_conf); - dmaengine_slave_config(txchan, &tx_conf); - - /* Create sglists for the transfers */ - pages = (pl022->cur_transfer->len >> PAGE_SHIFT) + 1; - dev_dbg(&pl022->adev->dev, "using %d pages for transfer\n", pages); - - ret = sg_alloc_table(&pl022->sgt_rx, pages, GFP_KERNEL); - if (ret) - goto err_alloc_rx_sg; - - ret = sg_alloc_table(&pl022->sgt_tx, pages, GFP_KERNEL); - if (ret) - goto err_alloc_tx_sg; - - /* Fill in the scatterlists for the RX+TX buffers */ - setup_dma_scatter(pl022, pl022->rx, - pl022->cur_transfer->len, &pl022->sgt_rx); - setup_dma_scatter(pl022, pl022->tx, - pl022->cur_transfer->len, &pl022->sgt_tx); - - /* Map DMA buffers */ - rx_sglen = dma_map_sg(rxchan->device->dev, pl022->sgt_rx.sgl, - pl022->sgt_rx.nents, DMA_FROM_DEVICE); - if (!rx_sglen) - goto err_rx_sgmap; - - tx_sglen = dma_map_sg(txchan->device->dev, pl022->sgt_tx.sgl, - pl022->sgt_tx.nents, DMA_TO_DEVICE); - if (!tx_sglen) - goto err_tx_sgmap; - - /* Send both scatterlists */ - rxdesc = rxchan->device->device_prep_slave_sg(rxchan, - pl022->sgt_rx.sgl, - rx_sglen, - DMA_FROM_DEVICE, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!rxdesc) - goto err_rxdesc; - - txdesc = txchan->device->device_prep_slave_sg(txchan, - pl022->sgt_tx.sgl, - tx_sglen, - DMA_TO_DEVICE, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!txdesc) - goto err_txdesc; - - /* Put the callback on the RX transfer only, that should finish last */ - rxdesc->callback = dma_callback; - rxdesc->callback_param = pl022; - - /* Submit and fire RX and TX with TX last so we're ready to read! */ - dmaengine_submit(rxdesc); - dmaengine_submit(txdesc); - dma_async_issue_pending(rxchan); - dma_async_issue_pending(txchan); - - return 0; - -err_txdesc: - dmaengine_terminate_all(txchan); -err_rxdesc: - dmaengine_terminate_all(rxchan); - dma_unmap_sg(txchan->device->dev, pl022->sgt_tx.sgl, - pl022->sgt_tx.nents, DMA_TO_DEVICE); -err_tx_sgmap: - dma_unmap_sg(rxchan->device->dev, pl022->sgt_rx.sgl, - pl022->sgt_tx.nents, DMA_FROM_DEVICE); -err_rx_sgmap: - sg_free_table(&pl022->sgt_tx); -err_alloc_tx_sg: - sg_free_table(&pl022->sgt_rx); -err_alloc_rx_sg: - return -ENOMEM; -} - -static int __init pl022_dma_probe(struct pl022 *pl022) -{ - dma_cap_mask_t mask; - - /* Try to acquire a generic DMA engine slave channel */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - /* - * We need both RX and TX channels to do DMA, else do none - * of them. - */ - pl022->dma_rx_channel = dma_request_channel(mask, - pl022->master_info->dma_filter, - pl022->master_info->dma_rx_param); - if (!pl022->dma_rx_channel) { - dev_dbg(&pl022->adev->dev, "no RX DMA channel!\n"); - goto err_no_rxchan; - } - - pl022->dma_tx_channel = dma_request_channel(mask, - pl022->master_info->dma_filter, - pl022->master_info->dma_tx_param); - if (!pl022->dma_tx_channel) { - dev_dbg(&pl022->adev->dev, "no TX DMA channel!\n"); - goto err_no_txchan; - } - - pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!pl022->dummypage) { - dev_dbg(&pl022->adev->dev, "no DMA dummypage!\n"); - goto err_no_dummypage; - } - - dev_info(&pl022->adev->dev, "setup for DMA on RX %s, TX %s\n", - dma_chan_name(pl022->dma_rx_channel), - dma_chan_name(pl022->dma_tx_channel)); - - return 0; - -err_no_dummypage: - dma_release_channel(pl022->dma_tx_channel); -err_no_txchan: - dma_release_channel(pl022->dma_rx_channel); - pl022->dma_rx_channel = NULL; -err_no_rxchan: - dev_err(&pl022->adev->dev, - "Failed to work in dma mode, work without dma!\n"); - return -ENODEV; -} - -static void terminate_dma(struct pl022 *pl022) -{ - struct dma_chan *rxchan = pl022->dma_rx_channel; - struct dma_chan *txchan = pl022->dma_tx_channel; - - dmaengine_terminate_all(rxchan); - dmaengine_terminate_all(txchan); - unmap_free_dma_scatter(pl022); -} - -static void pl022_dma_remove(struct pl022 *pl022) -{ - if (pl022->busy) - terminate_dma(pl022); - if (pl022->dma_tx_channel) - dma_release_channel(pl022->dma_tx_channel); - if (pl022->dma_rx_channel) - dma_release_channel(pl022->dma_rx_channel); - kfree(pl022->dummypage); -} - -#else -static inline int configure_dma(struct pl022 *pl022) -{ - return -ENODEV; -} - -static inline int pl022_dma_probe(struct pl022 *pl022) -{ - return 0; -} - -static inline void pl022_dma_remove(struct pl022 *pl022) -{ -} -#endif - -/** - * pl022_interrupt_handler - Interrupt handler for SSP controller - * - * This function handles interrupts generated for an interrupt based transfer. - * If a receive overrun (ROR) interrupt is there then we disable SSP, flag the - * current message's state as STATE_ERROR and schedule the tasklet - * pump_transfers which will do the postprocessing of the current message by - * calling giveback(). Otherwise it reads data from RX FIFO till there is no - * more data, and writes data in TX FIFO till it is not full. If we complete - * the transfer we move to the next transfer and schedule the tasklet. - */ -static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) -{ - struct pl022 *pl022 = dev_id; - struct spi_message *msg = pl022->cur_msg; - u16 irq_status = 0; - u16 flag = 0; - - if (unlikely(!msg)) { - dev_err(&pl022->adev->dev, - "bad message state in interrupt handler"); - /* Never fail */ - return IRQ_HANDLED; - } - - /* Read the Interrupt Status Register */ - irq_status = readw(SSP_MIS(pl022->virtbase)); - - if (unlikely(!irq_status)) - return IRQ_NONE; - - /* - * This handles the FIFO interrupts, the timeout - * interrupts are flatly ignored, they cannot be - * trusted. - */ - if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) { - /* - * Overrun interrupt - bail out since our Data has been - * corrupted - */ - dev_err(&pl022->adev->dev, "FIFO overrun\n"); - if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF) - dev_err(&pl022->adev->dev, - "RXFIFO is full\n"); - if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF) - dev_err(&pl022->adev->dev, - "TXFIFO is full\n"); - - /* - * Disable and clear interrupts, disable SSP, - * mark message with bad status so it can be - * retried. - */ - writew(DISABLE_ALL_INTERRUPTS, - SSP_IMSC(pl022->virtbase)); - writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); - writew((readw(SSP_CR1(pl022->virtbase)) & - (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); - msg->state = STATE_ERROR; - - /* Schedule message queue handler */ - tasklet_schedule(&pl022->pump_transfers); - return IRQ_HANDLED; - } - - readwriter(pl022); - - if ((pl022->tx == pl022->tx_end) && (flag == 0)) { - flag = 1; - /* Disable Transmit interrupt */ - writew(readw(SSP_IMSC(pl022->virtbase)) & - (~SSP_IMSC_MASK_TXIM), - SSP_IMSC(pl022->virtbase)); - } - - /* - * Since all transactions must write as much as shall be read, - * we can conclude the entire transaction once RX is complete. - * At this point, all TX will always be finished. - */ - if (pl022->rx >= pl022->rx_end) { - writew(DISABLE_ALL_INTERRUPTS, - SSP_IMSC(pl022->virtbase)); - writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); - if (unlikely(pl022->rx > pl022->rx_end)) { - dev_warn(&pl022->adev->dev, "read %u surplus " - "bytes (did you request an odd " - "number of bytes on a 16bit bus?)\n", - (u32) (pl022->rx - pl022->rx_end)); - } - /* Update total bytes transferred */ - msg->actual_length += pl022->cur_transfer->len; - if (pl022->cur_transfer->cs_change) - pl022->cur_chip-> - cs_control(SSP_CHIP_DESELECT); - /* Move to next transfer */ - msg->state = next_transfer(pl022); - tasklet_schedule(&pl022->pump_transfers); - return IRQ_HANDLED; - } - - return IRQ_HANDLED; -} - -/** - * This sets up the pointers to memory for the next message to - * send out on the SPI bus. - */ -static int set_up_next_transfer(struct pl022 *pl022, - struct spi_transfer *transfer) -{ - int residue; - - /* Sanity check the message for this bus width */ - residue = pl022->cur_transfer->len % pl022->cur_chip->n_bytes; - if (unlikely(residue != 0)) { - dev_err(&pl022->adev->dev, - "message of %u bytes to transmit but the current " - "chip bus has a data width of %u bytes!\n", - pl022->cur_transfer->len, - pl022->cur_chip->n_bytes); - dev_err(&pl022->adev->dev, "skipping this message\n"); - return -EIO; - } - pl022->tx = (void *)transfer->tx_buf; - pl022->tx_end = pl022->tx + pl022->cur_transfer->len; - pl022->rx = (void *)transfer->rx_buf; - pl022->rx_end = pl022->rx + pl022->cur_transfer->len; - pl022->write = - pl022->tx ? pl022->cur_chip->write : WRITING_NULL; - pl022->read = pl022->rx ? pl022->cur_chip->read : READING_NULL; - return 0; -} - -/** - * pump_transfers - Tasklet function which schedules next transfer - * when running in interrupt or DMA transfer mode. - * @data: SSP driver private data structure - * - */ -static void pump_transfers(unsigned long data) -{ - struct pl022 *pl022 = (struct pl022 *) data; - struct spi_message *message = NULL; - struct spi_transfer *transfer = NULL; - struct spi_transfer *previous = NULL; - - /* Get current state information */ - message = pl022->cur_msg; - transfer = pl022->cur_transfer; - - /* Handle for abort */ - if (message->state == STATE_ERROR) { - message->status = -EIO; - giveback(pl022); - return; - } - - /* Handle end of message */ - if (message->state == STATE_DONE) { - message->status = 0; - giveback(pl022); - return; - } - - /* Delay if requested at end of transfer before CS change */ - if (message->state == STATE_RUNNING) { - previous = list_entry(transfer->transfer_list.prev, - struct spi_transfer, - transfer_list); - if (previous->delay_usecs) - /* - * FIXME: This runs in interrupt context. - * Is this really smart? - */ - udelay(previous->delay_usecs); - - /* Drop chip select only if cs_change is requested */ - if (previous->cs_change) - pl022->cur_chip->cs_control(SSP_CHIP_SELECT); - } else { - /* STATE_START */ - message->state = STATE_RUNNING; - } - - if (set_up_next_transfer(pl022, transfer)) { - message->state = STATE_ERROR; - message->status = -EIO; - giveback(pl022); - return; - } - /* Flush the FIFOs and let's go! */ - flush(pl022); - - if (pl022->cur_chip->enable_dma) { - if (configure_dma(pl022)) { - dev_dbg(&pl022->adev->dev, - "configuration of DMA failed, fall back to interrupt mode\n"); - goto err_config_dma; - } - return; - } - -err_config_dma: - writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); -} - -static void do_interrupt_dma_transfer(struct pl022 *pl022) -{ - u32 irqflags = ENABLE_ALL_INTERRUPTS; - - /* Enable target chip */ - pl022->cur_chip->cs_control(SSP_CHIP_SELECT); - if (set_up_next_transfer(pl022, pl022->cur_transfer)) { - /* Error path */ - pl022->cur_msg->state = STATE_ERROR; - pl022->cur_msg->status = -EIO; - giveback(pl022); - return; - } - /* If we're using DMA, set up DMA here */ - if (pl022->cur_chip->enable_dma) { - /* Configure DMA transfer */ - if (configure_dma(pl022)) { - dev_dbg(&pl022->adev->dev, - "configuration of DMA failed, fall back to interrupt mode\n"); - goto err_config_dma; - } - /* Disable interrupts in DMA mode, IRQ from DMA controller */ - irqflags = DISABLE_ALL_INTERRUPTS; - } -err_config_dma: - /* Enable SSP, turn on interrupts */ - writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), - SSP_CR1(pl022->virtbase)); - writew(irqflags, SSP_IMSC(pl022->virtbase)); -} - -static void do_polling_transfer(struct pl022 *pl022) -{ - struct spi_message *message = NULL; - struct spi_transfer *transfer = NULL; - struct spi_transfer *previous = NULL; - struct chip_data *chip; - unsigned long time, timeout; - - chip = pl022->cur_chip; - message = pl022->cur_msg; - - while (message->state != STATE_DONE) { - /* Handle for abort */ - if (message->state == STATE_ERROR) - break; - transfer = pl022->cur_transfer; - - /* Delay if requested at end of transfer */ - if (message->state == STATE_RUNNING) { - previous = - list_entry(transfer->transfer_list.prev, - struct spi_transfer, transfer_list); - if (previous->delay_usecs) - udelay(previous->delay_usecs); - if (previous->cs_change) - pl022->cur_chip->cs_control(SSP_CHIP_SELECT); - } else { - /* STATE_START */ - message->state = STATE_RUNNING; - pl022->cur_chip->cs_control(SSP_CHIP_SELECT); - } - - /* Configuration Changing Per Transfer */ - if (set_up_next_transfer(pl022, transfer)) { - /* Error path */ - message->state = STATE_ERROR; - break; - } - /* Flush FIFOs and enable SSP */ - flush(pl022); - writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), - SSP_CR1(pl022->virtbase)); - - dev_dbg(&pl022->adev->dev, "polling transfer ongoing ...\n"); - - timeout = jiffies + msecs_to_jiffies(SPI_POLLING_TIMEOUT); - while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end) { - time = jiffies; - readwriter(pl022); - if (time_after(time, timeout)) { - dev_warn(&pl022->adev->dev, - "%s: timeout!\n", __func__); - message->state = STATE_ERROR; - goto out; - } - cpu_relax(); - } - - /* Update total byte transferred */ - message->actual_length += pl022->cur_transfer->len; - if (pl022->cur_transfer->cs_change) - pl022->cur_chip->cs_control(SSP_CHIP_DESELECT); - /* Move to next transfer */ - message->state = next_transfer(pl022); - } -out: - /* Handle end of message */ - if (message->state == STATE_DONE) - message->status = 0; - else - message->status = -EIO; - - giveback(pl022); - return; -} - -/** - * pump_messages - Workqueue function which processes spi message queue - * @data: pointer to private data of SSP driver - * - * This function checks if there is any spi message in the queue that - * needs processing and delegate control to appropriate function - * do_polling_transfer()/do_interrupt_dma_transfer() - * based on the kind of the transfer - * - */ -static void pump_messages(struct work_struct *work) -{ - struct pl022 *pl022 = - container_of(work, struct pl022, pump_messages); - unsigned long flags; - - /* Lock queue and check for queue work */ - spin_lock_irqsave(&pl022->queue_lock, flags); - if (list_empty(&pl022->queue) || !pl022->running) { - pl022->busy = false; - spin_unlock_irqrestore(&pl022->queue_lock, flags); - return; - } - /* Make sure we are not already running a message */ - if (pl022->cur_msg) { - spin_unlock_irqrestore(&pl022->queue_lock, flags); - return; - } - /* Extract head of queue */ - pl022->cur_msg = - list_entry(pl022->queue.next, struct spi_message, queue); - - list_del_init(&pl022->cur_msg->queue); - pl022->busy = true; - spin_unlock_irqrestore(&pl022->queue_lock, flags); - - /* Initial message state */ - pl022->cur_msg->state = STATE_START; - pl022->cur_transfer = list_entry(pl022->cur_msg->transfers.next, - struct spi_transfer, - transfer_list); - - /* Setup the SPI using the per chip configuration */ - pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi); - /* - * We enable the core voltage and clocks here, then the clocks - * and core will be disabled when giveback() is called in each method - * (poll/interrupt/DMA) - */ - amba_vcore_enable(pl022->adev); - amba_pclk_enable(pl022->adev); - clk_enable(pl022->clk); - restore_state(pl022); - flush(pl022); - - if (pl022->cur_chip->xfer_type == POLLING_TRANSFER) - do_polling_transfer(pl022); - else - do_interrupt_dma_transfer(pl022); -} - - -static int __init init_queue(struct pl022 *pl022) -{ - INIT_LIST_HEAD(&pl022->queue); - spin_lock_init(&pl022->queue_lock); - - pl022->running = false; - pl022->busy = false; - - tasklet_init(&pl022->pump_transfers, - pump_transfers, (unsigned long)pl022); - - INIT_WORK(&pl022->pump_messages, pump_messages); - pl022->workqueue = create_singlethread_workqueue( - dev_name(pl022->master->dev.parent)); - if (pl022->workqueue == NULL) - return -EBUSY; - - return 0; -} - - -static int start_queue(struct pl022 *pl022) -{ - unsigned long flags; - - spin_lock_irqsave(&pl022->queue_lock, flags); - - if (pl022->running || pl022->busy) { - spin_unlock_irqrestore(&pl022->queue_lock, flags); - return -EBUSY; - } - - pl022->running = true; - pl022->cur_msg = NULL; - pl022->cur_transfer = NULL; - pl022->cur_chip = NULL; - spin_unlock_irqrestore(&pl022->queue_lock, flags); - - queue_work(pl022->workqueue, &pl022->pump_messages); - - return 0; -} - - -static int stop_queue(struct pl022 *pl022) -{ - unsigned long flags; - unsigned limit = 500; - int status = 0; - - spin_lock_irqsave(&pl022->queue_lock, flags); - - /* This is a bit lame, but is optimized for the common execution path. - * A wait_queue on the pl022->busy could be used, but then the common - * execution path (pump_messages) would be required to call wake_up or - * friends on every SPI message. Do this instead */ - while ((!list_empty(&pl022->queue) || pl022->busy) && limit--) { - spin_unlock_irqrestore(&pl022->queue_lock, flags); - msleep(10); - spin_lock_irqsave(&pl022->queue_lock, flags); - } - - if (!list_empty(&pl022->queue) || pl022->busy) - status = -EBUSY; - else - pl022->running = false; - - spin_unlock_irqrestore(&pl022->queue_lock, flags); - - return status; -} - -static int destroy_queue(struct pl022 *pl022) -{ - int status; - - status = stop_queue(pl022); - /* we are unloading the module or failing to load (only two calls - * to this routine), and neither call can handle a return value. - * However, destroy_workqueue calls flush_workqueue, and that will - * block until all work is done. If the reason that stop_queue - * timed out is that the work will never finish, then it does no - * good to call destroy_workqueue, so return anyway. */ - if (status != 0) - return status; - - destroy_workqueue(pl022->workqueue); - - return 0; -} - -static int verify_controller_parameters(struct pl022 *pl022, - struct pl022_config_chip const *chip_info) -{ - if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI) - || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) { - dev_err(&pl022->adev->dev, - "interface is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) && - (!pl022->vendor->unidir)) { - dev_err(&pl022->adev->dev, - "unidirectional mode not supported in this " - "hardware version\n"); - return -EINVAL; - } - if ((chip_info->hierarchy != SSP_MASTER) - && (chip_info->hierarchy != SSP_SLAVE)) { - dev_err(&pl022->adev->dev, - "hierarchy is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->com_mode != INTERRUPT_TRANSFER) - && (chip_info->com_mode != DMA_TRANSFER) - && (chip_info->com_mode != POLLING_TRANSFER)) { - dev_err(&pl022->adev->dev, - "Communication mode is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM) - || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) { - dev_err(&pl022->adev->dev, - "RX FIFO Trigger Level is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC) - || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) { - dev_err(&pl022->adev->dev, - "TX FIFO Trigger Level is configured incorrectly\n"); - return -EINVAL; - } - if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) { - if ((chip_info->ctrl_len < SSP_BITS_4) - || (chip_info->ctrl_len > SSP_BITS_32)) { - dev_err(&pl022->adev->dev, - "CTRL LEN is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO) - && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) { - dev_err(&pl022->adev->dev, - "Wait State is configured incorrectly\n"); - return -EINVAL; - } - /* Half duplex is only available in the ST Micro version */ - if (pl022->vendor->extended_cr) { - if ((chip_info->duplex != - SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) - && (chip_info->duplex != - SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) { - dev_err(&pl022->adev->dev, - "Microwire duplex mode is configured incorrectly\n"); - return -EINVAL; - } - } else { - if (chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) - dev_err(&pl022->adev->dev, - "Microwire half duplex mode requested," - " but this is only available in the" - " ST version of PL022\n"); - return -EINVAL; - } - } - return 0; -} - -/** - * pl022_transfer - transfer function registered to SPI master framework - * @spi: spi device which is requesting transfer - * @msg: spi message which is to handled is queued to driver queue - * - * This function is registered to the SPI framework for this SPI master - * controller. It will queue the spi_message in the queue of driver if - * the queue is not stopped and return. - */ -static int pl022_transfer(struct spi_device *spi, struct spi_message *msg) -{ - struct pl022 *pl022 = spi_master_get_devdata(spi->master); - unsigned long flags; - - spin_lock_irqsave(&pl022->queue_lock, flags); - - if (!pl022->running) { - spin_unlock_irqrestore(&pl022->queue_lock, flags); - return -ESHUTDOWN; - } - msg->actual_length = 0; - msg->status = -EINPROGRESS; - msg->state = STATE_START; - - list_add_tail(&msg->queue, &pl022->queue); - if (pl022->running && !pl022->busy) - queue_work(pl022->workqueue, &pl022->pump_messages); - - spin_unlock_irqrestore(&pl022->queue_lock, flags); - return 0; -} - -static int calculate_effective_freq(struct pl022 *pl022, - int freq, - struct ssp_clock_params *clk_freq) -{ - /* Lets calculate the frequency parameters */ - u16 cpsdvsr = 2; - u16 scr = 0; - bool freq_found = false; - u32 rate; - u32 max_tclk; - u32 min_tclk; - - rate = clk_get_rate(pl022->clk); - /* cpsdvscr = 2 & scr 0 */ - max_tclk = (rate / (CPSDVR_MIN * (1 + SCR_MIN))); - /* cpsdvsr = 254 & scr = 255 */ - min_tclk = (rate / (CPSDVR_MAX * (1 + SCR_MAX))); - - if ((freq <= max_tclk) && (freq >= min_tclk)) { - while (cpsdvsr <= CPSDVR_MAX && !freq_found) { - while (scr <= SCR_MAX && !freq_found) { - if ((rate / - (cpsdvsr * (1 + scr))) > freq) - scr += 1; - else { - /* - * This bool is made true when - * effective frequency >= - * target frequency is found - */ - freq_found = true; - if ((rate / - (cpsdvsr * (1 + scr))) != freq) { - if (scr == SCR_MIN) { - cpsdvsr -= 2; - scr = SCR_MAX; - } else - scr -= 1; - } - } - } - if (!freq_found) { - cpsdvsr += 2; - scr = SCR_MIN; - } - } - if (cpsdvsr != 0) { - dev_dbg(&pl022->adev->dev, - "SSP Effective Frequency is %u\n", - (rate / (cpsdvsr * (1 + scr)))); - clk_freq->cpsdvsr = (u8) (cpsdvsr & 0xFF); - clk_freq->scr = (u8) (scr & 0xFF); - dev_dbg(&pl022->adev->dev, - "SSP cpsdvsr = %d, scr = %d\n", - clk_freq->cpsdvsr, clk_freq->scr); - } - } else { - dev_err(&pl022->adev->dev, - "controller data is incorrect: out of range frequency"); - return -EINVAL; - } - return 0; -} - - -/* - * A piece of default chip info unless the platform - * supplies it. - */ -static const struct pl022_config_chip pl022_default_chip_info = { - .com_mode = POLLING_TRANSFER, - .iface = SSP_INTERFACE_MOTOROLA_SPI, - .hierarchy = SSP_SLAVE, - .slave_tx_disable = DO_NOT_DRIVE_TX, - .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, - .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, - .ctrl_len = SSP_BITS_8, - .wait_state = SSP_MWIRE_WAIT_ZERO, - .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, - .cs_control = null_cs_control, -}; - - -/** - * pl022_setup - setup function registered to SPI master framework - * @spi: spi device which is requesting setup - * - * This function is registered to the SPI framework for this SPI master - * controller. If it is the first time when setup is called by this device, - * this function will initialize the runtime state for this chip and save - * the same in the device structure. Else it will update the runtime info - * with the updated chip info. Nothing is really being written to the - * controller hardware here, that is not done until the actual transfer - * commence. - */ -static int pl022_setup(struct spi_device *spi) -{ - struct pl022_config_chip const *chip_info; - struct chip_data *chip; - struct ssp_clock_params clk_freq = {0, }; - int status = 0; - struct pl022 *pl022 = spi_master_get_devdata(spi->master); - unsigned int bits = spi->bits_per_word; - u32 tmp; - - if (!spi->max_speed_hz) - return -EINVAL; - - /* Get controller_state if one is supplied */ - chip = spi_get_ctldata(spi); - - if (chip == NULL) { - chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); - if (!chip) { - dev_err(&spi->dev, - "cannot allocate controller state\n"); - return -ENOMEM; - } - dev_dbg(&spi->dev, - "allocated memory for controller's runtime state\n"); - } - - /* Get controller data if one is supplied */ - chip_info = spi->controller_data; - - if (chip_info == NULL) { - chip_info = &pl022_default_chip_info; - /* spi_board_info.controller_data not is supplied */ - dev_dbg(&spi->dev, - "using default controller_data settings\n"); - } else - dev_dbg(&spi->dev, - "using user supplied controller_data settings\n"); - - /* - * We can override with custom divisors, else we use the board - * frequency setting - */ - if ((0 == chip_info->clk_freq.cpsdvsr) - && (0 == chip_info->clk_freq.scr)) { - status = calculate_effective_freq(pl022, - spi->max_speed_hz, - &clk_freq); - if (status < 0) - goto err_config_params; - } else { - memcpy(&clk_freq, &chip_info->clk_freq, sizeof(clk_freq)); - if ((clk_freq.cpsdvsr % 2) != 0) - clk_freq.cpsdvsr = - clk_freq.cpsdvsr - 1; - } - if ((clk_freq.cpsdvsr < CPSDVR_MIN) - || (clk_freq.cpsdvsr > CPSDVR_MAX)) { - dev_err(&spi->dev, - "cpsdvsr is configured incorrectly\n"); - goto err_config_params; - } - - - status = verify_controller_parameters(pl022, chip_info); - if (status) { - dev_err(&spi->dev, "controller data is incorrect"); - goto err_config_params; - } - - /* Now set controller state based on controller data */ - chip->xfer_type = chip_info->com_mode; - if (!chip_info->cs_control) { - chip->cs_control = null_cs_control; - dev_warn(&spi->dev, - "chip select function is NULL for this chip\n"); - } else - chip->cs_control = chip_info->cs_control; - - if (bits <= 3) { - /* PL022 doesn't support less than 4-bits */ - status = -ENOTSUPP; - goto err_config_params; - } else if (bits <= 8) { - dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n"); - chip->n_bytes = 1; - chip->read = READING_U8; - chip->write = WRITING_U8; - } else if (bits <= 16) { - dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n"); - chip->n_bytes = 2; - chip->read = READING_U16; - chip->write = WRITING_U16; - } else { - if (pl022->vendor->max_bpw >= 32) { - dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); - chip->n_bytes = 4; - chip->read = READING_U32; - chip->write = WRITING_U32; - } else { - dev_err(&spi->dev, - "illegal data size for this controller!\n"); - dev_err(&spi->dev, - "a standard pl022 can only handle " - "1 <= n <= 16 bit words\n"); - status = -ENOTSUPP; - goto err_config_params; - } - } - - /* Now Initialize all register settings required for this chip */ - chip->cr0 = 0; - chip->cr1 = 0; - chip->dmacr = 0; - chip->cpsr = 0; - if ((chip_info->com_mode == DMA_TRANSFER) - && ((pl022->master_info)->enable_dma)) { - chip->enable_dma = true; - dev_dbg(&spi->dev, "DMA mode set in controller state\n"); - SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, - SSP_DMACR_MASK_RXDMAE, 0); - SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, - SSP_DMACR_MASK_TXDMAE, 1); - } else { - chip->enable_dma = false; - dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n"); - SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED, - SSP_DMACR_MASK_RXDMAE, 0); - SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED, - SSP_DMACR_MASK_TXDMAE, 1); - } - - chip->cpsr = clk_freq.cpsdvsr; - - /* Special setup for the ST micro extended control registers */ - if (pl022->vendor->extended_cr) { - u32 etx; - - if (pl022->vendor->pl023) { - /* These bits are only in the PL023 */ - SSP_WRITE_BITS(chip->cr1, chip_info->clkdelay, - SSP_CR1_MASK_FBCLKDEL_ST, 13); - } else { - /* These bits are in the PL022 but not PL023 */ - SSP_WRITE_BITS(chip->cr0, chip_info->duplex, - SSP_CR0_MASK_HALFDUP_ST, 5); - SSP_WRITE_BITS(chip->cr0, chip_info->ctrl_len, - SSP_CR0_MASK_CSS_ST, 16); - SSP_WRITE_BITS(chip->cr0, chip_info->iface, - SSP_CR0_MASK_FRF_ST, 21); - SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, - SSP_CR1_MASK_MWAIT_ST, 6); - } - SSP_WRITE_BITS(chip->cr0, bits - 1, - SSP_CR0_MASK_DSS_ST, 0); - - if (spi->mode & SPI_LSB_FIRST) { - tmp = SSP_RX_LSB; - etx = SSP_TX_LSB; - } else { - tmp = SSP_RX_MSB; - etx = SSP_TX_MSB; - } - SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_RENDN_ST, 4); - SSP_WRITE_BITS(chip->cr1, etx, SSP_CR1_MASK_TENDN_ST, 5); - SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, - SSP_CR1_MASK_RXIFLSEL_ST, 7); - SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, - SSP_CR1_MASK_TXIFLSEL_ST, 10); - } else { - SSP_WRITE_BITS(chip->cr0, bits - 1, - SSP_CR0_MASK_DSS, 0); - SSP_WRITE_BITS(chip->cr0, chip_info->iface, - SSP_CR0_MASK_FRF, 4); - } - - /* Stuff that is common for all versions */ - if (spi->mode & SPI_CPOL) - tmp = SSP_CLK_POL_IDLE_HIGH; - else - tmp = SSP_CLK_POL_IDLE_LOW; - SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPO, 6); - - if (spi->mode & SPI_CPHA) - tmp = SSP_CLK_SECOND_EDGE; - else - tmp = SSP_CLK_FIRST_EDGE; - SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPH, 7); - - SSP_WRITE_BITS(chip->cr0, clk_freq.scr, SSP_CR0_MASK_SCR, 8); - /* Loopback is available on all versions except PL023 */ - if (pl022->vendor->loopback) { - if (spi->mode & SPI_LOOP) - tmp = LOOPBACK_ENABLED; - else - tmp = LOOPBACK_DISABLED; - SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_LBM, 0); - } - SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1); - SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2); - SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3); - - /* Save controller_state */ - spi_set_ctldata(spi, chip); - return status; - err_config_params: - spi_set_ctldata(spi, NULL); - kfree(chip); - return status; -} - -/** - * pl022_cleanup - cleanup function registered to SPI master framework - * @spi: spi device which is requesting cleanup - * - * This function is registered to the SPI framework for this SPI master - * controller. It will free the runtime state of chip. - */ -static void pl022_cleanup(struct spi_device *spi) -{ - struct chip_data *chip = spi_get_ctldata(spi); - - spi_set_ctldata(spi, NULL); - kfree(chip); -} - - -static int __devinit -pl022_probe(struct amba_device *adev, const struct amba_id *id) -{ - struct device *dev = &adev->dev; - struct pl022_ssp_controller *platform_info = adev->dev.platform_data; - struct spi_master *master; - struct pl022 *pl022 = NULL; /*Data for this driver */ - int status = 0; - - dev_info(&adev->dev, - "ARM PL022 driver, device ID: 0x%08x\n", adev->periphid); - if (platform_info == NULL) { - dev_err(&adev->dev, "probe - no platform data supplied\n"); - status = -ENODEV; - goto err_no_pdata; - } - - /* Allocate master with space for data */ - master = spi_alloc_master(dev, sizeof(struct pl022)); - if (master == NULL) { - dev_err(&adev->dev, "probe - cannot alloc SPI master\n"); - status = -ENOMEM; - goto err_no_master; - } - - pl022 = spi_master_get_devdata(master); - pl022->master = master; - pl022->master_info = platform_info; - pl022->adev = adev; - pl022->vendor = id->data; - - /* - * Bus Number Which has been Assigned to this SSP controller - * on this board - */ - master->bus_num = platform_info->bus_id; - master->num_chipselect = platform_info->num_chipselect; - master->cleanup = pl022_cleanup; - master->setup = pl022_setup; - master->transfer = pl022_transfer; - - /* - * Supports mode 0-3, loopback, and active low CS. Transfers are - * always MS bit first on the original pl022. - */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; - if (pl022->vendor->extended_cr) - master->mode_bits |= SPI_LSB_FIRST; - - dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num); - - status = amba_request_regions(adev, NULL); - if (status) - goto err_no_ioregion; - - pl022->phybase = adev->res.start; - pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res)); - if (pl022->virtbase == NULL) { - status = -ENOMEM; - goto err_no_ioremap; - } - printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n", - adev->res.start, pl022->virtbase); - - pl022->clk = clk_get(&adev->dev, NULL); - if (IS_ERR(pl022->clk)) { - status = PTR_ERR(pl022->clk); - dev_err(&adev->dev, "could not retrieve SSP/SPI bus clock\n"); - goto err_no_clk; - } - - /* Disable SSP */ - writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), - SSP_CR1(pl022->virtbase)); - load_ssp_default_config(pl022); - - status = request_irq(adev->irq[0], pl022_interrupt_handler, 0, "pl022", - pl022); - if (status < 0) { - dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status); - goto err_no_irq; - } - - /* Get DMA channels */ - if (platform_info->enable_dma) { - status = pl022_dma_probe(pl022); - if (status != 0) - platform_info->enable_dma = 0; - } - - /* Initialize and start queue */ - status = init_queue(pl022); - if (status != 0) { - dev_err(&adev->dev, "probe - problem initializing queue\n"); - goto err_init_queue; - } - status = start_queue(pl022); - if (status != 0) { - dev_err(&adev->dev, "probe - problem starting queue\n"); - goto err_start_queue; - } - /* Register with the SPI framework */ - amba_set_drvdata(adev, pl022); - status = spi_register_master(master); - if (status != 0) { - dev_err(&adev->dev, - "probe - problem registering spi master\n"); - goto err_spi_register; - } - dev_dbg(dev, "probe succeeded\n"); - /* - * Disable the silicon block pclk and any voltage domain and just - * power it up and clock it when it's needed - */ - amba_pclk_disable(adev); - amba_vcore_disable(adev); - return 0; - - err_spi_register: - err_start_queue: - err_init_queue: - destroy_queue(pl022); - pl022_dma_remove(pl022); - free_irq(adev->irq[0], pl022); - err_no_irq: - clk_put(pl022->clk); - err_no_clk: - iounmap(pl022->virtbase); - err_no_ioremap: - amba_release_regions(adev); - err_no_ioregion: - spi_master_put(master); - err_no_master: - err_no_pdata: - return status; -} - -static int __devexit -pl022_remove(struct amba_device *adev) -{ - struct pl022 *pl022 = amba_get_drvdata(adev); - int status = 0; - if (!pl022) - return 0; - - /* Remove the queue */ - status = destroy_queue(pl022); - if (status != 0) { - dev_err(&adev->dev, - "queue remove failed (%d)\n", status); - return status; - } - load_ssp_default_config(pl022); - pl022_dma_remove(pl022); - free_irq(adev->irq[0], pl022); - clk_disable(pl022->clk); - clk_put(pl022->clk); - iounmap(pl022->virtbase); - amba_release_regions(adev); - tasklet_disable(&pl022->pump_transfers); - spi_unregister_master(pl022->master); - spi_master_put(pl022->master); - amba_set_drvdata(adev, NULL); - dev_dbg(&adev->dev, "remove succeeded\n"); - return 0; -} - -#ifdef CONFIG_PM -static int pl022_suspend(struct amba_device *adev, pm_message_t state) -{ - struct pl022 *pl022 = amba_get_drvdata(adev); - int status = 0; - - status = stop_queue(pl022); - if (status) { - dev_warn(&adev->dev, "suspend cannot stop queue\n"); - return status; - } - - amba_vcore_enable(adev); - amba_pclk_enable(adev); - load_ssp_default_config(pl022); - amba_pclk_disable(adev); - amba_vcore_disable(adev); - dev_dbg(&adev->dev, "suspended\n"); - return 0; -} - -static int pl022_resume(struct amba_device *adev) -{ - struct pl022 *pl022 = amba_get_drvdata(adev); - int status = 0; - - /* Start the queue running */ - status = start_queue(pl022); - if (status) - dev_err(&adev->dev, "problem starting queue (%d)\n", status); - else - dev_dbg(&adev->dev, "resumed\n"); - - return status; -} -#else -#define pl022_suspend NULL -#define pl022_resume NULL -#endif /* CONFIG_PM */ - -static struct vendor_data vendor_arm = { - .fifodepth = 8, - .max_bpw = 16, - .unidir = false, - .extended_cr = false, - .pl023 = false, - .loopback = true, -}; - - -static struct vendor_data vendor_st = { - .fifodepth = 32, - .max_bpw = 32, - .unidir = false, - .extended_cr = true, - .pl023 = false, - .loopback = true, -}; - -static struct vendor_data vendor_st_pl023 = { - .fifodepth = 32, - .max_bpw = 32, - .unidir = false, - .extended_cr = true, - .pl023 = true, - .loopback = false, -}; - -static struct vendor_data vendor_db5500_pl023 = { - .fifodepth = 32, - .max_bpw = 32, - .unidir = false, - .extended_cr = true, - .pl023 = true, - .loopback = true, -}; - -static struct amba_id pl022_ids[] = { - { - /* - * ARM PL022 variant, this has a 16bit wide - * and 8 locations deep TX/RX FIFO - */ - .id = 0x00041022, - .mask = 0x000fffff, - .data = &vendor_arm, - }, - { - /* - * ST Micro derivative, this has 32bit wide - * and 32 locations deep TX/RX FIFO - */ - .id = 0x01080022, - .mask = 0xffffffff, - .data = &vendor_st, - }, - { - /* - * ST-Ericsson derivative "PL023" (this is not - * an official ARM number), this is a PL022 SSP block - * stripped to SPI mode only, it has 32bit wide - * and 32 locations deep TX/RX FIFO but no extended - * CR0/CR1 register - */ - .id = 0x00080023, - .mask = 0xffffffff, - .data = &vendor_st_pl023, - }, - { - .id = 0x10080023, - .mask = 0xffffffff, - .data = &vendor_db5500_pl023, - }, - { 0, 0 }, -}; - -static struct amba_driver pl022_driver = { - .drv = { - .name = "ssp-pl022", - }, - .id_table = pl022_ids, - .probe = pl022_probe, - .remove = __devexit_p(pl022_remove), - .suspend = pl022_suspend, - .resume = pl022_resume, -}; - - -static int __init pl022_init(void) -{ - return amba_driver_register(&pl022_driver); -} - -subsys_initcall(pl022_init); - -static void __exit pl022_exit(void) -{ - amba_driver_unregister(&pl022_driver); -} - -module_exit(pl022_exit); - -MODULE_AUTHOR("Linus Walleij "); -MODULE_DESCRIPTION("PL022 SSP Controller Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/ath79_spi.c b/drivers/spi/ath79_spi.c deleted file mode 100644 index fcff810ea3b0..000000000000 --- a/drivers/spi/ath79_spi.c +++ /dev/null @@ -1,292 +0,0 @@ -/* - * SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs - * - * Copyright (C) 2009-2011 Gabor Juhos - * - * This driver has been based on the spi-gpio.c: - * Copyright (C) 2006,2008 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DRV_NAME "ath79-spi" - -struct ath79_spi { - struct spi_bitbang bitbang; - u32 ioc_base; - u32 reg_ctrl; - void __iomem *base; -}; - -static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg) -{ - return ioread32(sp->base + reg); -} - -static inline void ath79_spi_wr(struct ath79_spi *sp, unsigned reg, u32 val) -{ - iowrite32(val, sp->base + reg); -} - -static inline struct ath79_spi *ath79_spidev_to_sp(struct spi_device *spi) -{ - return spi_master_get_devdata(spi->master); -} - -static void ath79_spi_chipselect(struct spi_device *spi, int is_active) -{ - struct ath79_spi *sp = ath79_spidev_to_sp(spi); - int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active; - - if (is_active) { - /* set initial clock polarity */ - if (spi->mode & SPI_CPOL) - sp->ioc_base |= AR71XX_SPI_IOC_CLK; - else - sp->ioc_base &= ~AR71XX_SPI_IOC_CLK; - - ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); - } - - if (spi->chip_select) { - struct ath79_spi_controller_data *cdata = spi->controller_data; - - /* SPI is normally active-low */ - gpio_set_value(cdata->gpio, cs_high); - } else { - if (cs_high) - sp->ioc_base |= AR71XX_SPI_IOC_CS0; - else - sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; - - ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); - } - -} - -static int ath79_spi_setup_cs(struct spi_device *spi) -{ - struct ath79_spi *sp = ath79_spidev_to_sp(spi); - struct ath79_spi_controller_data *cdata; - - cdata = spi->controller_data; - if (spi->chip_select && !cdata) - return -EINVAL; - - /* enable GPIO mode */ - ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO); - - /* save CTRL register */ - sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL); - sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC); - - /* TODO: setup speed? */ - ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); - - if (spi->chip_select) { - int status = 0; - - status = gpio_request(cdata->gpio, dev_name(&spi->dev)); - if (status) - return status; - - status = gpio_direction_output(cdata->gpio, - spi->mode & SPI_CS_HIGH); - if (status) { - gpio_free(cdata->gpio); - return status; - } - } else { - if (spi->mode & SPI_CS_HIGH) - sp->ioc_base |= AR71XX_SPI_IOC_CS0; - else - sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; - ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); - } - - return 0; -} - -static void ath79_spi_cleanup_cs(struct spi_device *spi) -{ - struct ath79_spi *sp = ath79_spidev_to_sp(spi); - - if (spi->chip_select) { - struct ath79_spi_controller_data *cdata = spi->controller_data; - gpio_free(cdata->gpio); - } - - /* restore CTRL register */ - ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl); - /* disable GPIO mode */ - ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); -} - -static int ath79_spi_setup(struct spi_device *spi) -{ - int status = 0; - - if (spi->bits_per_word > 32) - return -EINVAL; - - if (!spi->controller_state) { - status = ath79_spi_setup_cs(spi); - if (status) - return status; - } - - status = spi_bitbang_setup(spi); - if (status && !spi->controller_state) - ath79_spi_cleanup_cs(spi); - - return status; -} - -static void ath79_spi_cleanup(struct spi_device *spi) -{ - ath79_spi_cleanup_cs(spi); - spi_bitbang_cleanup(spi); -} - -static u32 ath79_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs, - u32 word, u8 bits) -{ - struct ath79_spi *sp = ath79_spidev_to_sp(spi); - u32 ioc = sp->ioc_base; - - /* clock starts at inactive polarity */ - for (word <<= (32 - bits); likely(bits); bits--) { - u32 out; - - if (word & (1 << 31)) - out = ioc | AR71XX_SPI_IOC_DO; - else - out = ioc & ~AR71XX_SPI_IOC_DO; - - /* setup MSB (to slave) on trailing edge */ - ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out); - ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK); - - word <<= 1; - } - - return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS); -} - -static __devinit int ath79_spi_probe(struct platform_device *pdev) -{ - struct spi_master *master; - struct ath79_spi *sp; - struct ath79_spi_platform_data *pdata; - struct resource *r; - int ret; - - master = spi_alloc_master(&pdev->dev, sizeof(*sp)); - if (master == NULL) { - dev_err(&pdev->dev, "failed to allocate spi master\n"); - return -ENOMEM; - } - - sp = spi_master_get_devdata(master); - platform_set_drvdata(pdev, sp); - - pdata = pdev->dev.platform_data; - - master->setup = ath79_spi_setup; - master->cleanup = ath79_spi_cleanup; - if (pdata) { - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->num_chipselect; - } else { - master->bus_num = -1; - master->num_chipselect = 1; - } - - sp->bitbang.master = spi_master_get(master); - sp->bitbang.chipselect = ath79_spi_chipselect; - sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0; - sp->bitbang.setup_transfer = spi_bitbang_setup_transfer; - sp->bitbang.flags = SPI_CS_HIGH; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - ret = -ENOENT; - goto err_put_master; - } - - sp->base = ioremap(r->start, r->end - r->start + 1); - if (!sp->base) { - ret = -ENXIO; - goto err_put_master; - } - - ret = spi_bitbang_start(&sp->bitbang); - if (ret) - goto err_unmap; - - return 0; - -err_unmap: - iounmap(sp->base); -err_put_master: - platform_set_drvdata(pdev, NULL); - spi_master_put(sp->bitbang.master); - - return ret; -} - -static __devexit int ath79_spi_remove(struct platform_device *pdev) -{ - struct ath79_spi *sp = platform_get_drvdata(pdev); - - spi_bitbang_stop(&sp->bitbang); - iounmap(sp->base); - platform_set_drvdata(pdev, NULL); - spi_master_put(sp->bitbang.master); - - return 0; -} - -static struct platform_driver ath79_spi_driver = { - .probe = ath79_spi_probe, - .remove = __devexit_p(ath79_spi_remove), - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static __init int ath79_spi_init(void) -{ - return platform_driver_register(&ath79_spi_driver); -} -module_init(ath79_spi_init); - -static __exit void ath79_spi_exit(void) -{ - platform_driver_unregister(&ath79_spi_driver); -} -module_exit(ath79_spi_exit); - -MODULE_DESCRIPTION("SPI controller driver for Atheros AR71XX/AR724X/AR913X"); -MODULE_AUTHOR("Gabor Juhos "); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c deleted file mode 100644 index 08711e9202ab..000000000000 --- a/drivers/spi/atmel_spi.c +++ /dev/null @@ -1,940 +0,0 @@ -/* - * Driver for Atmel AT32 and AT91 SPI Controllers - * - * Copyright (C) 2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "atmel_spi.h" - -/* - * The core SPI transfer engine just talks to a register bank to set up - * DMA transfers; transfer queue progress is driven by IRQs. The clock - * framework provides the base clock, subdivided for each spi_device. - */ -struct atmel_spi { - spinlock_t lock; - - void __iomem *regs; - int irq; - struct clk *clk; - struct platform_device *pdev; - struct spi_device *stay; - - u8 stopping; - struct list_head queue; - struct spi_transfer *current_transfer; - unsigned long current_remaining_bytes; - struct spi_transfer *next_transfer; - unsigned long next_remaining_bytes; - - void *buffer; - dma_addr_t buffer_dma; -}; - -/* Controller-specific per-slave state */ -struct atmel_spi_device { - unsigned int npcs_pin; - u32 csr; -}; - -#define BUFFER_SIZE PAGE_SIZE -#define INVALID_DMA_ADDRESS 0xffffffff - -/* - * Version 2 of the SPI controller has - * - CR.LASTXFER - * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero) - * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs) - * - SPI_CSRx.CSAAT - * - SPI_CSRx.SBCR allows faster clocking - * - * We can determine the controller version by reading the VERSION - * register, but I haven't checked that it exists on all chips, and - * this is cheaper anyway. - */ -static bool atmel_spi_is_v2(void) -{ - return !cpu_is_at91rm9200(); -} - -/* - * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby - * they assume that spi slave device state will not change on deselect, so - * that automagic deselection is OK. ("NPCSx rises if no data is to be - * transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer - * controllers have CSAAT and friends. - * - * Since the CSAAT functionality is a bit weird on newer controllers as - * well, we use GPIO to control nCSx pins on all controllers, updating - * MR.PCS to avoid confusing the controller. Using GPIOs also lets us - * support active-high chipselects despite the controller's belief that - * only active-low devices/systems exists. - * - * However, at91rm9200 has a second erratum whereby nCS0 doesn't work - * right when driven with GPIO. ("Mode Fault does not allow more than one - * Master on Chip Select 0.") No workaround exists for that ... so for - * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH, - * and (c) will trigger that first erratum in some cases. - * - * TODO: Test if the atmel_spi_is_v2() branch below works on - * AT91RM9200 if we use some other register than CSR0. However, don't - * do this unconditionally since AP7000 has an errata where the BITS - * field in CSR0 overrides all other CSRs. - */ - -static void cs_activate(struct atmel_spi *as, struct spi_device *spi) -{ - struct atmel_spi_device *asd = spi->controller_state; - unsigned active = spi->mode & SPI_CS_HIGH; - u32 mr; - - if (atmel_spi_is_v2()) { - /* - * Always use CSR0. This ensures that the clock - * switches to the correct idle polarity before we - * toggle the CS. - */ - spi_writel(as, CSR0, asd->csr); - spi_writel(as, MR, SPI_BF(PCS, 0x0e) | SPI_BIT(MODFDIS) - | SPI_BIT(MSTR)); - mr = spi_readl(as, MR); - gpio_set_value(asd->npcs_pin, active); - } else { - u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0; - int i; - u32 csr; - - /* Make sure clock polarity is correct */ - for (i = 0; i < spi->master->num_chipselect; i++) { - csr = spi_readl(as, CSR0 + 4 * i); - if ((csr ^ cpol) & SPI_BIT(CPOL)) - spi_writel(as, CSR0 + 4 * i, - csr ^ SPI_BIT(CPOL)); - } - - mr = spi_readl(as, MR); - mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr); - if (spi->chip_select != 0) - gpio_set_value(asd->npcs_pin, active); - spi_writel(as, MR, mr); - } - - dev_dbg(&spi->dev, "activate %u%s, mr %08x\n", - asd->npcs_pin, active ? " (high)" : "", - mr); -} - -static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi) -{ - struct atmel_spi_device *asd = spi->controller_state; - unsigned active = spi->mode & SPI_CS_HIGH; - u32 mr; - - /* only deactivate *this* device; sometimes transfers to - * another device may be active when this routine is called. - */ - mr = spi_readl(as, MR); - if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) { - mr = SPI_BFINS(PCS, 0xf, mr); - spi_writel(as, MR, mr); - } - - dev_dbg(&spi->dev, "DEactivate %u%s, mr %08x\n", - asd->npcs_pin, active ? " (low)" : "", - mr); - - if (atmel_spi_is_v2() || spi->chip_select != 0) - gpio_set_value(asd->npcs_pin, !active); -} - -static inline int atmel_spi_xfer_is_last(struct spi_message *msg, - struct spi_transfer *xfer) -{ - return msg->transfers.prev == &xfer->transfer_list; -} - -static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer) -{ - return xfer->delay_usecs == 0 && !xfer->cs_change; -} - -static void atmel_spi_next_xfer_data(struct spi_master *master, - struct spi_transfer *xfer, - dma_addr_t *tx_dma, - dma_addr_t *rx_dma, - u32 *plen) -{ - struct atmel_spi *as = spi_master_get_devdata(master); - u32 len = *plen; - - /* use scratch buffer only when rx or tx data is unspecified */ - if (xfer->rx_buf) - *rx_dma = xfer->rx_dma + xfer->len - *plen; - else { - *rx_dma = as->buffer_dma; - if (len > BUFFER_SIZE) - len = BUFFER_SIZE; - } - if (xfer->tx_buf) - *tx_dma = xfer->tx_dma + xfer->len - *plen; - else { - *tx_dma = as->buffer_dma; - if (len > BUFFER_SIZE) - len = BUFFER_SIZE; - memset(as->buffer, 0, len); - dma_sync_single_for_device(&as->pdev->dev, - as->buffer_dma, len, DMA_TO_DEVICE); - } - - *plen = len; -} - -/* - * Submit next transfer for DMA. - * lock is held, spi irq is blocked - */ -static void atmel_spi_next_xfer(struct spi_master *master, - struct spi_message *msg) -{ - struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_transfer *xfer; - u32 len, remaining; - u32 ieval; - dma_addr_t tx_dma, rx_dma; - - if (!as->current_transfer) - xfer = list_entry(msg->transfers.next, - struct spi_transfer, transfer_list); - else if (!as->next_transfer) - xfer = list_entry(as->current_transfer->transfer_list.next, - struct spi_transfer, transfer_list); - else - xfer = NULL; - - if (xfer) { - spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); - - len = xfer->len; - atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); - remaining = xfer->len - len; - - spi_writel(as, RPR, rx_dma); - spi_writel(as, TPR, tx_dma); - - if (msg->spi->bits_per_word > 8) - len >>= 1; - spi_writel(as, RCR, len); - spi_writel(as, TCR, len); - - dev_dbg(&msg->spi->dev, - " start xfer %p: len %u tx %p/%08x rx %p/%08x\n", - xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, - xfer->rx_buf, xfer->rx_dma); - } else { - xfer = as->next_transfer; - remaining = as->next_remaining_bytes; - } - - as->current_transfer = xfer; - as->current_remaining_bytes = remaining; - - if (remaining > 0) - len = remaining; - else if (!atmel_spi_xfer_is_last(msg, xfer) - && atmel_spi_xfer_can_be_chained(xfer)) { - xfer = list_entry(xfer->transfer_list.next, - struct spi_transfer, transfer_list); - len = xfer->len; - } else - xfer = NULL; - - as->next_transfer = xfer; - - if (xfer) { - u32 total; - - total = len; - atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); - as->next_remaining_bytes = total - len; - - spi_writel(as, RNPR, rx_dma); - spi_writel(as, TNPR, tx_dma); - - if (msg->spi->bits_per_word > 8) - len >>= 1; - spi_writel(as, RNCR, len); - spi_writel(as, TNCR, len); - - dev_dbg(&msg->spi->dev, - " next xfer %p: len %u tx %p/%08x rx %p/%08x\n", - xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, - xfer->rx_buf, xfer->rx_dma); - ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES); - } else { - spi_writel(as, RNCR, 0); - spi_writel(as, TNCR, 0); - ieval = SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES); - } - - /* REVISIT: We're waiting for ENDRX before we start the next - * transfer because we need to handle some difficult timing - * issues otherwise. If we wait for ENDTX in one transfer and - * then starts waiting for ENDRX in the next, it's difficult - * to tell the difference between the ENDRX interrupt we're - * actually waiting for and the ENDRX interrupt of the - * previous transfer. - * - * It should be doable, though. Just not now... - */ - spi_writel(as, IER, ieval); - spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); -} - -static void atmel_spi_next_message(struct spi_master *master) -{ - struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_message *msg; - struct spi_device *spi; - - BUG_ON(as->current_transfer); - - msg = list_entry(as->queue.next, struct spi_message, queue); - spi = msg->spi; - - dev_dbg(master->dev.parent, "start message %p for %s\n", - msg, dev_name(&spi->dev)); - - /* select chip if it's not still active */ - if (as->stay) { - if (as->stay != spi) { - cs_deactivate(as, as->stay); - cs_activate(as, spi); - } - as->stay = NULL; - } else - cs_activate(as, spi); - - atmel_spi_next_xfer(master, msg); -} - -/* - * For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma: - * - The buffer is either valid for CPU access, else NULL - * - If the buffer is valid, so is its DMA address - * - * This driver manages the dma address unless message->is_dma_mapped. - */ -static int -atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer) -{ - struct device *dev = &as->pdev->dev; - - xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS; - if (xfer->tx_buf) { - /* tx_buf is a const void* where we need a void * for the dma - * mapping */ - void *nonconst_tx = (void *)xfer->tx_buf; - - xfer->tx_dma = dma_map_single(dev, - nonconst_tx, xfer->len, - DMA_TO_DEVICE); - if (dma_mapping_error(dev, xfer->tx_dma)) - return -ENOMEM; - } - if (xfer->rx_buf) { - xfer->rx_dma = dma_map_single(dev, - xfer->rx_buf, xfer->len, - DMA_FROM_DEVICE); - if (dma_mapping_error(dev, xfer->rx_dma)) { - if (xfer->tx_buf) - dma_unmap_single(dev, - xfer->tx_dma, xfer->len, - DMA_TO_DEVICE); - return -ENOMEM; - } - } - return 0; -} - -static void atmel_spi_dma_unmap_xfer(struct spi_master *master, - struct spi_transfer *xfer) -{ - if (xfer->tx_dma != INVALID_DMA_ADDRESS) - dma_unmap_single(master->dev.parent, xfer->tx_dma, - xfer->len, DMA_TO_DEVICE); - if (xfer->rx_dma != INVALID_DMA_ADDRESS) - dma_unmap_single(master->dev.parent, xfer->rx_dma, - xfer->len, DMA_FROM_DEVICE); -} - -static void -atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as, - struct spi_message *msg, int status, int stay) -{ - if (!stay || status < 0) - cs_deactivate(as, msg->spi); - else - as->stay = msg->spi; - - list_del(&msg->queue); - msg->status = status; - - dev_dbg(master->dev.parent, - "xfer complete: %u bytes transferred\n", - msg->actual_length); - - spin_unlock(&as->lock); - msg->complete(msg->context); - spin_lock(&as->lock); - - as->current_transfer = NULL; - as->next_transfer = NULL; - - /* continue if needed */ - if (list_empty(&as->queue) || as->stopping) - spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); - else - atmel_spi_next_message(master); -} - -static irqreturn_t -atmel_spi_interrupt(int irq, void *dev_id) -{ - struct spi_master *master = dev_id; - struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_message *msg; - struct spi_transfer *xfer; - u32 status, pending, imr; - int ret = IRQ_NONE; - - spin_lock(&as->lock); - - xfer = as->current_transfer; - msg = list_entry(as->queue.next, struct spi_message, queue); - - imr = spi_readl(as, IMR); - status = spi_readl(as, SR); - pending = status & imr; - - if (pending & SPI_BIT(OVRES)) { - int timeout; - - ret = IRQ_HANDLED; - - spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) - | SPI_BIT(OVRES))); - - /* - * When we get an overrun, we disregard the current - * transfer. Data will not be copied back from any - * bounce buffer and msg->actual_len will not be - * updated with the last xfer. - * - * We will also not process any remaning transfers in - * the message. - * - * First, stop the transfer and unmap the DMA buffers. - */ - spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); - if (!msg->is_dma_mapped) - atmel_spi_dma_unmap_xfer(master, xfer); - - /* REVISIT: udelay in irq is unfriendly */ - if (xfer->delay_usecs) - udelay(xfer->delay_usecs); - - dev_warn(master->dev.parent, "overrun (%u/%u remaining)\n", - spi_readl(as, TCR), spi_readl(as, RCR)); - - /* - * Clean up DMA registers and make sure the data - * registers are empty. - */ - spi_writel(as, RNCR, 0); - spi_writel(as, TNCR, 0); - spi_writel(as, RCR, 0); - spi_writel(as, TCR, 0); - for (timeout = 1000; timeout; timeout--) - if (spi_readl(as, SR) & SPI_BIT(TXEMPTY)) - break; - if (!timeout) - dev_warn(master->dev.parent, - "timeout waiting for TXEMPTY"); - while (spi_readl(as, SR) & SPI_BIT(RDRF)) - spi_readl(as, RDR); - - /* Clear any overrun happening while cleaning up */ - spi_readl(as, SR); - - atmel_spi_msg_done(master, as, msg, -EIO, 0); - } else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) { - ret = IRQ_HANDLED; - - spi_writel(as, IDR, pending); - - if (as->current_remaining_bytes == 0) { - msg->actual_length += xfer->len; - - if (!msg->is_dma_mapped) - atmel_spi_dma_unmap_xfer(master, xfer); - - /* REVISIT: udelay in irq is unfriendly */ - if (xfer->delay_usecs) - udelay(xfer->delay_usecs); - - if (atmel_spi_xfer_is_last(msg, xfer)) { - /* report completed message */ - atmel_spi_msg_done(master, as, msg, 0, - xfer->cs_change); - } else { - if (xfer->cs_change) { - cs_deactivate(as, msg->spi); - udelay(1); - cs_activate(as, msg->spi); - } - - /* - * Not done yet. Submit the next transfer. - * - * FIXME handle protocol options for xfer - */ - atmel_spi_next_xfer(master, msg); - } - } else { - /* - * Keep going, we still have data to send in - * the current transfer. - */ - atmel_spi_next_xfer(master, msg); - } - } - - spin_unlock(&as->lock); - - return ret; -} - -static int atmel_spi_setup(struct spi_device *spi) -{ - struct atmel_spi *as; - struct atmel_spi_device *asd; - u32 scbr, csr; - unsigned int bits = spi->bits_per_word; - unsigned long bus_hz; - unsigned int npcs_pin; - int ret; - - as = spi_master_get_devdata(spi->master); - - if (as->stopping) - return -ESHUTDOWN; - - if (spi->chip_select > spi->master->num_chipselect) { - dev_dbg(&spi->dev, - "setup: invalid chipselect %u (%u defined)\n", - spi->chip_select, spi->master->num_chipselect); - return -EINVAL; - } - - if (bits < 8 || bits > 16) { - dev_dbg(&spi->dev, - "setup: invalid bits_per_word %u (8 to 16)\n", - bits); - return -EINVAL; - } - - /* see notes above re chipselect */ - if (!atmel_spi_is_v2() - && spi->chip_select == 0 - && (spi->mode & SPI_CS_HIGH)) { - dev_dbg(&spi->dev, "setup: can't be active-high\n"); - return -EINVAL; - } - - /* v1 chips start out at half the peripheral bus speed. */ - bus_hz = clk_get_rate(as->clk); - if (!atmel_spi_is_v2()) - bus_hz /= 2; - - if (spi->max_speed_hz) { - /* - * Calculate the lowest divider that satisfies the - * constraint, assuming div32/fdiv/mbz == 0. - */ - scbr = DIV_ROUND_UP(bus_hz, spi->max_speed_hz); - - /* - * If the resulting divider doesn't fit into the - * register bitfield, we can't satisfy the constraint. - */ - if (scbr >= (1 << SPI_SCBR_SIZE)) { - dev_dbg(&spi->dev, - "setup: %d Hz too slow, scbr %u; min %ld Hz\n", - spi->max_speed_hz, scbr, bus_hz/255); - return -EINVAL; - } - } else - /* speed zero means "as slow as possible" */ - scbr = 0xff; - - csr = SPI_BF(SCBR, scbr) | SPI_BF(BITS, bits - 8); - if (spi->mode & SPI_CPOL) - csr |= SPI_BIT(CPOL); - if (!(spi->mode & SPI_CPHA)) - csr |= SPI_BIT(NCPHA); - - /* DLYBS is mostly irrelevant since we manage chipselect using GPIOs. - * - * DLYBCT would add delays between words, slowing down transfers. - * It could potentially be useful to cope with DMA bottlenecks, but - * in those cases it's probably best to just use a lower bitrate. - */ - csr |= SPI_BF(DLYBS, 0); - csr |= SPI_BF(DLYBCT, 0); - - /* chipselect must have been muxed as GPIO (e.g. in board setup) */ - npcs_pin = (unsigned int)spi->controller_data; - asd = spi->controller_state; - if (!asd) { - asd = kzalloc(sizeof(struct atmel_spi_device), GFP_KERNEL); - if (!asd) - return -ENOMEM; - - ret = gpio_request(npcs_pin, dev_name(&spi->dev)); - if (ret) { - kfree(asd); - return ret; - } - - asd->npcs_pin = npcs_pin; - spi->controller_state = asd; - gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH)); - } else { - unsigned long flags; - - spin_lock_irqsave(&as->lock, flags); - if (as->stay == spi) - as->stay = NULL; - cs_deactivate(as, spi); - spin_unlock_irqrestore(&as->lock, flags); - } - - asd->csr = csr; - - dev_dbg(&spi->dev, - "setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n", - bus_hz / scbr, bits, spi->mode, spi->chip_select, csr); - - if (!atmel_spi_is_v2()) - spi_writel(as, CSR0 + 4 * spi->chip_select, csr); - - return 0; -} - -static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) -{ - struct atmel_spi *as; - struct spi_transfer *xfer; - unsigned long flags; - struct device *controller = spi->master->dev.parent; - u8 bits; - struct atmel_spi_device *asd; - - as = spi_master_get_devdata(spi->master); - - dev_dbg(controller, "new message %p submitted for %s\n", - msg, dev_name(&spi->dev)); - - if (unlikely(list_empty(&msg->transfers))) - return -EINVAL; - - if (as->stopping) - return -ESHUTDOWN; - - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) { - dev_dbg(&spi->dev, "missing rx or tx buf\n"); - return -EINVAL; - } - - if (xfer->bits_per_word) { - asd = spi->controller_state; - bits = (asd->csr >> 4) & 0xf; - if (bits != xfer->bits_per_word - 8) { - dev_dbg(&spi->dev, "you can't yet change " - "bits_per_word in transfers\n"); - return -ENOPROTOOPT; - } - } - - /* FIXME implement these protocol options!! */ - if (xfer->speed_hz) { - dev_dbg(&spi->dev, "no protocol options yet\n"); - return -ENOPROTOOPT; - } - - /* - * DMA map early, for performance (empties dcache ASAP) and - * better fault reporting. This is a DMA-only driver. - * - * NOTE that if dma_unmap_single() ever starts to do work on - * platforms supported by this driver, we would need to clean - * up mappings for previously-mapped transfers. - */ - if (!msg->is_dma_mapped) { - if (atmel_spi_dma_map_xfer(as, xfer) < 0) - return -ENOMEM; - } - } - -#ifdef VERBOSE - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - dev_dbg(controller, - " xfer %p: len %u tx %p/%08x rx %p/%08x\n", - xfer, xfer->len, - xfer->tx_buf, xfer->tx_dma, - xfer->rx_buf, xfer->rx_dma); - } -#endif - - msg->status = -EINPROGRESS; - msg->actual_length = 0; - - spin_lock_irqsave(&as->lock, flags); - list_add_tail(&msg->queue, &as->queue); - if (!as->current_transfer) - atmel_spi_next_message(spi->master); - spin_unlock_irqrestore(&as->lock, flags); - - return 0; -} - -static void atmel_spi_cleanup(struct spi_device *spi) -{ - struct atmel_spi *as = spi_master_get_devdata(spi->master); - struct atmel_spi_device *asd = spi->controller_state; - unsigned gpio = (unsigned) spi->controller_data; - unsigned long flags; - - if (!asd) - return; - - spin_lock_irqsave(&as->lock, flags); - if (as->stay == spi) { - as->stay = NULL; - cs_deactivate(as, spi); - } - spin_unlock_irqrestore(&as->lock, flags); - - spi->controller_state = NULL; - gpio_free(gpio); - kfree(asd); -} - -/*-------------------------------------------------------------------------*/ - -static int __init atmel_spi_probe(struct platform_device *pdev) -{ - struct resource *regs; - int irq; - struct clk *clk; - int ret; - struct spi_master *master; - struct atmel_spi *as; - - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) - return -ENXIO; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - - clk = clk_get(&pdev->dev, "spi_clk"); - if (IS_ERR(clk)) - return PTR_ERR(clk); - - /* setup spi core then atmel-specific driver state */ - ret = -ENOMEM; - master = spi_alloc_master(&pdev->dev, sizeof *as); - if (!master) - goto out_free; - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - - master->bus_num = pdev->id; - master->num_chipselect = 4; - master->setup = atmel_spi_setup; - master->transfer = atmel_spi_transfer; - master->cleanup = atmel_spi_cleanup; - platform_set_drvdata(pdev, master); - - as = spi_master_get_devdata(master); - - /* - * Scratch buffer is used for throwaway rx and tx data. - * It's coherent to minimize dcache pollution. - */ - as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE, - &as->buffer_dma, GFP_KERNEL); - if (!as->buffer) - goto out_free; - - spin_lock_init(&as->lock); - INIT_LIST_HEAD(&as->queue); - as->pdev = pdev; - as->regs = ioremap(regs->start, resource_size(regs)); - if (!as->regs) - goto out_free_buffer; - as->irq = irq; - as->clk = clk; - - ret = request_irq(irq, atmel_spi_interrupt, 0, - dev_name(&pdev->dev), master); - if (ret) - goto out_unmap_regs; - - /* Initialize the hardware */ - clk_enable(clk); - spi_writel(as, CR, SPI_BIT(SWRST)); - spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ - spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS)); - spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); - spi_writel(as, CR, SPI_BIT(SPIEN)); - - /* go! */ - dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n", - (unsigned long)regs->start, irq); - - ret = spi_register_master(master); - if (ret) - goto out_reset_hw; - - return 0; - -out_reset_hw: - spi_writel(as, CR, SPI_BIT(SWRST)); - spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ - clk_disable(clk); - free_irq(irq, master); -out_unmap_regs: - iounmap(as->regs); -out_free_buffer: - dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer, - as->buffer_dma); -out_free: - clk_put(clk); - spi_master_put(master); - return ret; -} - -static int __exit atmel_spi_remove(struct platform_device *pdev) -{ - struct spi_master *master = platform_get_drvdata(pdev); - struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_message *msg; - - /* reset the hardware and block queue progress */ - spin_lock_irq(&as->lock); - as->stopping = 1; - spi_writel(as, CR, SPI_BIT(SWRST)); - spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ - spi_readl(as, SR); - spin_unlock_irq(&as->lock); - - /* Terminate remaining queued transfers */ - list_for_each_entry(msg, &as->queue, queue) { - /* REVISIT unmapping the dma is a NOP on ARM and AVR32 - * but we shouldn't depend on that... - */ - msg->status = -ESHUTDOWN; - msg->complete(msg->context); - } - - dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer, - as->buffer_dma); - - clk_disable(as->clk); - clk_put(as->clk); - free_irq(as->irq, master); - iounmap(as->regs); - - spi_unregister_master(master); - - return 0; -} - -#ifdef CONFIG_PM - -static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg) -{ - struct spi_master *master = platform_get_drvdata(pdev); - struct atmel_spi *as = spi_master_get_devdata(master); - - clk_disable(as->clk); - return 0; -} - -static int atmel_spi_resume(struct platform_device *pdev) -{ - struct spi_master *master = platform_get_drvdata(pdev); - struct atmel_spi *as = spi_master_get_devdata(master); - - clk_enable(as->clk); - return 0; -} - -#else -#define atmel_spi_suspend NULL -#define atmel_spi_resume NULL -#endif - - -static struct platform_driver atmel_spi_driver = { - .driver = { - .name = "atmel_spi", - .owner = THIS_MODULE, - }, - .suspend = atmel_spi_suspend, - .resume = atmel_spi_resume, - .remove = __exit_p(atmel_spi_remove), -}; - -static int __init atmel_spi_init(void) -{ - return platform_driver_probe(&atmel_spi_driver, atmel_spi_probe); -} -module_init(atmel_spi_init); - -static void __exit atmel_spi_exit(void) -{ - platform_driver_unregister(&atmel_spi_driver); -} -module_exit(atmel_spi_exit); - -MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver"); -MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:atmel_spi"); diff --git a/drivers/spi/atmel_spi.h b/drivers/spi/atmel_spi.h deleted file mode 100644 index 6e06b6ad3a45..000000000000 --- a/drivers/spi/atmel_spi.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Register definitions for Atmel Serial Peripheral Interface (SPI) - * - * Copyright (C) 2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ATMEL_SPI_H__ -#define __ATMEL_SPI_H__ - -/* SPI register offsets */ -#define SPI_CR 0x0000 -#define SPI_MR 0x0004 -#define SPI_RDR 0x0008 -#define SPI_TDR 0x000c -#define SPI_SR 0x0010 -#define SPI_IER 0x0014 -#define SPI_IDR 0x0018 -#define SPI_IMR 0x001c -#define SPI_CSR0 0x0030 -#define SPI_CSR1 0x0034 -#define SPI_CSR2 0x0038 -#define SPI_CSR3 0x003c -#define SPI_RPR 0x0100 -#define SPI_RCR 0x0104 -#define SPI_TPR 0x0108 -#define SPI_TCR 0x010c -#define SPI_RNPR 0x0110 -#define SPI_RNCR 0x0114 -#define SPI_TNPR 0x0118 -#define SPI_TNCR 0x011c -#define SPI_PTCR 0x0120 -#define SPI_PTSR 0x0124 - -/* Bitfields in CR */ -#define SPI_SPIEN_OFFSET 0 -#define SPI_SPIEN_SIZE 1 -#define SPI_SPIDIS_OFFSET 1 -#define SPI_SPIDIS_SIZE 1 -#define SPI_SWRST_OFFSET 7 -#define SPI_SWRST_SIZE 1 -#define SPI_LASTXFER_OFFSET 24 -#define SPI_LASTXFER_SIZE 1 - -/* Bitfields in MR */ -#define SPI_MSTR_OFFSET 0 -#define SPI_MSTR_SIZE 1 -#define SPI_PS_OFFSET 1 -#define SPI_PS_SIZE 1 -#define SPI_PCSDEC_OFFSET 2 -#define SPI_PCSDEC_SIZE 1 -#define SPI_FDIV_OFFSET 3 -#define SPI_FDIV_SIZE 1 -#define SPI_MODFDIS_OFFSET 4 -#define SPI_MODFDIS_SIZE 1 -#define SPI_LLB_OFFSET 7 -#define SPI_LLB_SIZE 1 -#define SPI_PCS_OFFSET 16 -#define SPI_PCS_SIZE 4 -#define SPI_DLYBCS_OFFSET 24 -#define SPI_DLYBCS_SIZE 8 - -/* Bitfields in RDR */ -#define SPI_RD_OFFSET 0 -#define SPI_RD_SIZE 16 - -/* Bitfields in TDR */ -#define SPI_TD_OFFSET 0 -#define SPI_TD_SIZE 16 - -/* Bitfields in SR */ -#define SPI_RDRF_OFFSET 0 -#define SPI_RDRF_SIZE 1 -#define SPI_TDRE_OFFSET 1 -#define SPI_TDRE_SIZE 1 -#define SPI_MODF_OFFSET 2 -#define SPI_MODF_SIZE 1 -#define SPI_OVRES_OFFSET 3 -#define SPI_OVRES_SIZE 1 -#define SPI_ENDRX_OFFSET 4 -#define SPI_ENDRX_SIZE 1 -#define SPI_ENDTX_OFFSET 5 -#define SPI_ENDTX_SIZE 1 -#define SPI_RXBUFF_OFFSET 6 -#define SPI_RXBUFF_SIZE 1 -#define SPI_TXBUFE_OFFSET 7 -#define SPI_TXBUFE_SIZE 1 -#define SPI_NSSR_OFFSET 8 -#define SPI_NSSR_SIZE 1 -#define SPI_TXEMPTY_OFFSET 9 -#define SPI_TXEMPTY_SIZE 1 -#define SPI_SPIENS_OFFSET 16 -#define SPI_SPIENS_SIZE 1 - -/* Bitfields in CSR0 */ -#define SPI_CPOL_OFFSET 0 -#define SPI_CPOL_SIZE 1 -#define SPI_NCPHA_OFFSET 1 -#define SPI_NCPHA_SIZE 1 -#define SPI_CSAAT_OFFSET 3 -#define SPI_CSAAT_SIZE 1 -#define SPI_BITS_OFFSET 4 -#define SPI_BITS_SIZE 4 -#define SPI_SCBR_OFFSET 8 -#define SPI_SCBR_SIZE 8 -#define SPI_DLYBS_OFFSET 16 -#define SPI_DLYBS_SIZE 8 -#define SPI_DLYBCT_OFFSET 24 -#define SPI_DLYBCT_SIZE 8 - -/* Bitfields in RCR */ -#define SPI_RXCTR_OFFSET 0 -#define SPI_RXCTR_SIZE 16 - -/* Bitfields in TCR */ -#define SPI_TXCTR_OFFSET 0 -#define SPI_TXCTR_SIZE 16 - -/* Bitfields in RNCR */ -#define SPI_RXNCR_OFFSET 0 -#define SPI_RXNCR_SIZE 16 - -/* Bitfields in TNCR */ -#define SPI_TXNCR_OFFSET 0 -#define SPI_TXNCR_SIZE 16 - -/* Bitfields in PTCR */ -#define SPI_RXTEN_OFFSET 0 -#define SPI_RXTEN_SIZE 1 -#define SPI_RXTDIS_OFFSET 1 -#define SPI_RXTDIS_SIZE 1 -#define SPI_TXTEN_OFFSET 8 -#define SPI_TXTEN_SIZE 1 -#define SPI_TXTDIS_OFFSET 9 -#define SPI_TXTDIS_SIZE 1 - -/* Constants for BITS */ -#define SPI_BITS_8_BPT 0 -#define SPI_BITS_9_BPT 1 -#define SPI_BITS_10_BPT 2 -#define SPI_BITS_11_BPT 3 -#define SPI_BITS_12_BPT 4 -#define SPI_BITS_13_BPT 5 -#define SPI_BITS_14_BPT 6 -#define SPI_BITS_15_BPT 7 -#define SPI_BITS_16_BPT 8 - -/* Bit manipulation macros */ -#define SPI_BIT(name) \ - (1 << SPI_##name##_OFFSET) -#define SPI_BF(name,value) \ - (((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET) -#define SPI_BFEXT(name,value) \ - (((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1)) -#define SPI_BFINS(name,value,old) \ - ( ((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \ - | SPI_BF(name,value)) - -/* Register access macros */ -#define spi_readl(port,reg) \ - __raw_readl((port)->regs + SPI_##reg) -#define spi_writel(port,reg,value) \ - __raw_writel((value), (port)->regs + SPI_##reg) - -#endif /* __ATMEL_SPI_H__ */ diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c deleted file mode 100644 index b50563d320e1..000000000000 --- a/drivers/spi/au1550_spi.c +++ /dev/null @@ -1,1032 +0,0 @@ -/* - * au1550_spi.c - au1550 psc spi controller driver - * may work also with au1200, au1210, au1250 - * will not work on au1000, au1100 and au1500 (no full spi controller there) - * - * Copyright (c) 2006 ATRON electronic GmbH - * Author: Jan Nikitenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -static unsigned usedma = 1; -module_param(usedma, uint, 0644); - -/* -#define AU1550_SPI_DEBUG_LOOPBACK -*/ - - -#define AU1550_SPI_DBDMA_DESCRIPTORS 1 -#define AU1550_SPI_DMA_RXTMP_MINSIZE 2048U - -struct au1550_spi { - struct spi_bitbang bitbang; - - volatile psc_spi_t __iomem *regs; - int irq; - unsigned freq_max; - unsigned freq_min; - - unsigned len; - unsigned tx_count; - unsigned rx_count; - const u8 *tx; - u8 *rx; - - void (*rx_word)(struct au1550_spi *hw); - void (*tx_word)(struct au1550_spi *hw); - int (*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t); - irqreturn_t (*irq_callback)(struct au1550_spi *hw); - - struct completion master_done; - - unsigned usedma; - u32 dma_tx_id; - u32 dma_rx_id; - u32 dma_tx_ch; - u32 dma_rx_ch; - - u8 *dma_rx_tmpbuf; - unsigned dma_rx_tmpbuf_size; - u32 dma_rx_tmpbuf_addr; - - struct spi_master *master; - struct device *dev; - struct au1550_spi_info *pdata; - struct resource *ioarea; -}; - - -/* we use an 8-bit memory device for dma transfers to/from spi fifo */ -static dbdev_tab_t au1550_spi_mem_dbdev = -{ - .dev_id = DBDMA_MEM_CHAN, - .dev_flags = DEV_FLAGS_ANYUSE|DEV_FLAGS_SYNC, - .dev_tsize = 0, - .dev_devwidth = 8, - .dev_physaddr = 0x00000000, - .dev_intlevel = 0, - .dev_intpolarity = 0 -}; - -static int ddma_memid; /* id to above mem dma device */ - -static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw); - - -/* - * compute BRG and DIV bits to setup spi clock based on main input clock rate - * that was specified in platform data structure - * according to au1550 datasheet: - * psc_tempclk = psc_mainclk / (2 << DIV) - * spiclk = psc_tempclk / (2 * (BRG + 1)) - * BRG valid range is 4..63 - * DIV valid range is 0..3 - */ -static u32 au1550_spi_baudcfg(struct au1550_spi *hw, unsigned speed_hz) -{ - u32 mainclk_hz = hw->pdata->mainclk_hz; - u32 div, brg; - - for (div = 0; div < 4; div++) { - brg = mainclk_hz / speed_hz / (4 << div); - /* now we have BRG+1 in brg, so count with that */ - if (brg < (4 + 1)) { - brg = (4 + 1); /* speed_hz too big */ - break; /* set lowest brg (div is == 0) */ - } - if (brg <= (63 + 1)) - break; /* we have valid brg and div */ - } - if (div == 4) { - div = 3; /* speed_hz too small */ - brg = (63 + 1); /* set highest brg and div */ - } - brg--; - return PSC_SPICFG_SET_BAUD(brg) | PSC_SPICFG_SET_DIV(div); -} - -static inline void au1550_spi_mask_ack_all(struct au1550_spi *hw) -{ - hw->regs->psc_spimsk = - PSC_SPIMSK_MM | PSC_SPIMSK_RR | PSC_SPIMSK_RO - | PSC_SPIMSK_RU | PSC_SPIMSK_TR | PSC_SPIMSK_TO - | PSC_SPIMSK_TU | PSC_SPIMSK_SD | PSC_SPIMSK_MD; - au_sync(); - - hw->regs->psc_spievent = - PSC_SPIEVNT_MM | PSC_SPIEVNT_RR | PSC_SPIEVNT_RO - | PSC_SPIEVNT_RU | PSC_SPIEVNT_TR | PSC_SPIEVNT_TO - | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD | PSC_SPIEVNT_MD; - au_sync(); -} - -static void au1550_spi_reset_fifos(struct au1550_spi *hw) -{ - u32 pcr; - - hw->regs->psc_spipcr = PSC_SPIPCR_RC | PSC_SPIPCR_TC; - au_sync(); - do { - pcr = hw->regs->psc_spipcr; - au_sync(); - } while (pcr != 0); -} - -/* - * dma transfers are used for the most common spi word size of 8-bits - * we cannot easily change already set up dma channels' width, so if we wanted - * dma support for more than 8-bit words (up to 24 bits), we would need to - * setup dma channels from scratch on each spi transfer, based on bits_per_word - * instead we have pre set up 8 bit dma channels supporting spi 4 to 8 bits - * transfers, and 9 to 24 bits spi transfers will be done in pio irq based mode - * callbacks to handle dma or pio are set up in au1550_spi_bits_handlers_set() - */ -static void au1550_spi_chipsel(struct spi_device *spi, int value) -{ - struct au1550_spi *hw = spi_master_get_devdata(spi->master); - unsigned cspol = spi->mode & SPI_CS_HIGH ? 1 : 0; - u32 cfg, stat; - - switch (value) { - case BITBANG_CS_INACTIVE: - if (hw->pdata->deactivate_cs) - hw->pdata->deactivate_cs(hw->pdata, spi->chip_select, - cspol); - break; - - case BITBANG_CS_ACTIVE: - au1550_spi_bits_handlers_set(hw, spi->bits_per_word); - - cfg = hw->regs->psc_spicfg; - au_sync(); - hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE; - au_sync(); - - if (spi->mode & SPI_CPOL) - cfg |= PSC_SPICFG_BI; - else - cfg &= ~PSC_SPICFG_BI; - if (spi->mode & SPI_CPHA) - cfg &= ~PSC_SPICFG_CDE; - else - cfg |= PSC_SPICFG_CDE; - - if (spi->mode & SPI_LSB_FIRST) - cfg |= PSC_SPICFG_MLF; - else - cfg &= ~PSC_SPICFG_MLF; - - if (hw->usedma && spi->bits_per_word <= 8) - cfg &= ~PSC_SPICFG_DD_DISABLE; - else - cfg |= PSC_SPICFG_DD_DISABLE; - cfg = PSC_SPICFG_CLR_LEN(cfg); - cfg |= PSC_SPICFG_SET_LEN(spi->bits_per_word); - - cfg = PSC_SPICFG_CLR_BAUD(cfg); - cfg &= ~PSC_SPICFG_SET_DIV(3); - cfg |= au1550_spi_baudcfg(hw, spi->max_speed_hz); - - hw->regs->psc_spicfg = cfg | PSC_SPICFG_DE_ENABLE; - au_sync(); - do { - stat = hw->regs->psc_spistat; - au_sync(); - } while ((stat & PSC_SPISTAT_DR) == 0); - - if (hw->pdata->activate_cs) - hw->pdata->activate_cs(hw->pdata, spi->chip_select, - cspol); - break; - } -} - -static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t) -{ - struct au1550_spi *hw = spi_master_get_devdata(spi->master); - unsigned bpw, hz; - u32 cfg, stat; - - bpw = spi->bits_per_word; - hz = spi->max_speed_hz; - if (t) { - if (t->bits_per_word) - bpw = t->bits_per_word; - if (t->speed_hz) - hz = t->speed_hz; - } - - if (bpw < 4 || bpw > 24) { - dev_err(&spi->dev, "setupxfer: invalid bits_per_word=%d\n", - bpw); - return -EINVAL; - } - if (hz > spi->max_speed_hz || hz > hw->freq_max || hz < hw->freq_min) { - dev_err(&spi->dev, "setupxfer: clock rate=%d out of range\n", - hz); - return -EINVAL; - } - - au1550_spi_bits_handlers_set(hw, spi->bits_per_word); - - cfg = hw->regs->psc_spicfg; - au_sync(); - hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE; - au_sync(); - - if (hw->usedma && bpw <= 8) - cfg &= ~PSC_SPICFG_DD_DISABLE; - else - cfg |= PSC_SPICFG_DD_DISABLE; - cfg = PSC_SPICFG_CLR_LEN(cfg); - cfg |= PSC_SPICFG_SET_LEN(bpw); - - cfg = PSC_SPICFG_CLR_BAUD(cfg); - cfg &= ~PSC_SPICFG_SET_DIV(3); - cfg |= au1550_spi_baudcfg(hw, hz); - - hw->regs->psc_spicfg = cfg; - au_sync(); - - if (cfg & PSC_SPICFG_DE_ENABLE) { - do { - stat = hw->regs->psc_spistat; - au_sync(); - } while ((stat & PSC_SPISTAT_DR) == 0); - } - - au1550_spi_reset_fifos(hw); - au1550_spi_mask_ack_all(hw); - return 0; -} - -static int au1550_spi_setup(struct spi_device *spi) -{ - struct au1550_spi *hw = spi_master_get_devdata(spi->master); - - if (spi->bits_per_word < 4 || spi->bits_per_word > 24) { - dev_err(&spi->dev, "setup: invalid bits_per_word=%d\n", - spi->bits_per_word); - return -EINVAL; - } - - if (spi->max_speed_hz == 0) - spi->max_speed_hz = hw->freq_max; - if (spi->max_speed_hz > hw->freq_max - || spi->max_speed_hz < hw->freq_min) - return -EINVAL; - /* - * NOTE: cannot change speed and other hw settings immediately, - * otherwise sharing of spi bus is not possible, - * so do not call setupxfer(spi, NULL) here - */ - return 0; -} - -/* - * for dma spi transfers, we have to setup rx channel, otherwise there is - * no reliable way how to recognize that spi transfer is done - * dma complete callbacks are called before real spi transfer is finished - * and if only tx dma channel is set up (and rx fifo overflow event masked) - * spi master done event irq is not generated unless rx fifo is empty (emptied) - * so we need rx tmp buffer to use for rx dma if user does not provide one - */ -static int au1550_spi_dma_rxtmp_alloc(struct au1550_spi *hw, unsigned size) -{ - hw->dma_rx_tmpbuf = kmalloc(size, GFP_KERNEL); - if (!hw->dma_rx_tmpbuf) - return -ENOMEM; - hw->dma_rx_tmpbuf_size = size; - hw->dma_rx_tmpbuf_addr = dma_map_single(hw->dev, hw->dma_rx_tmpbuf, - size, DMA_FROM_DEVICE); - if (dma_mapping_error(hw->dev, hw->dma_rx_tmpbuf_addr)) { - kfree(hw->dma_rx_tmpbuf); - hw->dma_rx_tmpbuf = 0; - hw->dma_rx_tmpbuf_size = 0; - return -EFAULT; - } - return 0; -} - -static void au1550_spi_dma_rxtmp_free(struct au1550_spi *hw) -{ - dma_unmap_single(hw->dev, hw->dma_rx_tmpbuf_addr, - hw->dma_rx_tmpbuf_size, DMA_FROM_DEVICE); - kfree(hw->dma_rx_tmpbuf); - hw->dma_rx_tmpbuf = 0; - hw->dma_rx_tmpbuf_size = 0; -} - -static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) -{ - struct au1550_spi *hw = spi_master_get_devdata(spi->master); - dma_addr_t dma_tx_addr; - dma_addr_t dma_rx_addr; - u32 res; - - hw->len = t->len; - hw->tx_count = 0; - hw->rx_count = 0; - - hw->tx = t->tx_buf; - hw->rx = t->rx_buf; - dma_tx_addr = t->tx_dma; - dma_rx_addr = t->rx_dma; - - /* - * check if buffers are already dma mapped, map them otherwise: - * - first map the TX buffer, so cache data gets written to memory - * - then map the RX buffer, so that cache entries (with - * soon-to-be-stale data) get removed - * use rx buffer in place of tx if tx buffer was not provided - * use temp rx buffer (preallocated or realloc to fit) for rx dma - */ - if (t->tx_buf) { - if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ - dma_tx_addr = dma_map_single(hw->dev, - (void *)t->tx_buf, - t->len, DMA_TO_DEVICE); - if (dma_mapping_error(hw->dev, dma_tx_addr)) - dev_err(hw->dev, "tx dma map error\n"); - } - } - - if (t->rx_buf) { - if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ - dma_rx_addr = dma_map_single(hw->dev, - (void *)t->rx_buf, - t->len, DMA_FROM_DEVICE); - if (dma_mapping_error(hw->dev, dma_rx_addr)) - dev_err(hw->dev, "rx dma map error\n"); - } - } else { - if (t->len > hw->dma_rx_tmpbuf_size) { - int ret; - - au1550_spi_dma_rxtmp_free(hw); - ret = au1550_spi_dma_rxtmp_alloc(hw, max(t->len, - AU1550_SPI_DMA_RXTMP_MINSIZE)); - if (ret < 0) - return ret; - } - hw->rx = hw->dma_rx_tmpbuf; - dma_rx_addr = hw->dma_rx_tmpbuf_addr; - dma_sync_single_for_device(hw->dev, dma_rx_addr, - t->len, DMA_FROM_DEVICE); - } - - if (!t->tx_buf) { - dma_sync_single_for_device(hw->dev, dma_rx_addr, - t->len, DMA_BIDIRECTIONAL); - hw->tx = hw->rx; - } - - /* put buffers on the ring */ - res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, virt_to_phys(hw->rx), - t->len, DDMA_FLAGS_IE); - if (!res) - dev_err(hw->dev, "rx dma put dest error\n"); - - res = au1xxx_dbdma_put_source(hw->dma_tx_ch, virt_to_phys(hw->tx), - t->len, DDMA_FLAGS_IE); - if (!res) - dev_err(hw->dev, "tx dma put source error\n"); - - au1xxx_dbdma_start(hw->dma_rx_ch); - au1xxx_dbdma_start(hw->dma_tx_ch); - - /* by default enable nearly all events interrupt */ - hw->regs->psc_spimsk = PSC_SPIMSK_SD; - au_sync(); - - /* start the transfer */ - hw->regs->psc_spipcr = PSC_SPIPCR_MS; - au_sync(); - - wait_for_completion(&hw->master_done); - - au1xxx_dbdma_stop(hw->dma_tx_ch); - au1xxx_dbdma_stop(hw->dma_rx_ch); - - if (!t->rx_buf) { - /* using the temporal preallocated and premapped buffer */ - dma_sync_single_for_cpu(hw->dev, dma_rx_addr, t->len, - DMA_FROM_DEVICE); - } - /* unmap buffers if mapped above */ - if (t->rx_buf && t->rx_dma == 0 ) - dma_unmap_single(hw->dev, dma_rx_addr, t->len, - DMA_FROM_DEVICE); - if (t->tx_buf && t->tx_dma == 0 ) - dma_unmap_single(hw->dev, dma_tx_addr, t->len, - DMA_TO_DEVICE); - - return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count; -} - -static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw) -{ - u32 stat, evnt; - - stat = hw->regs->psc_spistat; - evnt = hw->regs->psc_spievent; - au_sync(); - if ((stat & PSC_SPISTAT_DI) == 0) { - dev_err(hw->dev, "Unexpected IRQ!\n"); - return IRQ_NONE; - } - - if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO - | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO - | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD)) - != 0) { - /* - * due to an spi error we consider transfer as done, - * so mask all events until before next transfer start - * and stop the possibly running dma immediatelly - */ - au1550_spi_mask_ack_all(hw); - au1xxx_dbdma_stop(hw->dma_rx_ch); - au1xxx_dbdma_stop(hw->dma_tx_ch); - - /* get number of transferred bytes */ - hw->rx_count = hw->len - au1xxx_get_dma_residue(hw->dma_rx_ch); - hw->tx_count = hw->len - au1xxx_get_dma_residue(hw->dma_tx_ch); - - au1xxx_dbdma_reset(hw->dma_rx_ch); - au1xxx_dbdma_reset(hw->dma_tx_ch); - au1550_spi_reset_fifos(hw); - - if (evnt == PSC_SPIEVNT_RO) - dev_err(hw->dev, - "dma transfer: receive FIFO overflow!\n"); - else - dev_err(hw->dev, - "dma transfer: unexpected SPI error " - "(event=0x%x stat=0x%x)!\n", evnt, stat); - - complete(&hw->master_done); - return IRQ_HANDLED; - } - - if ((evnt & PSC_SPIEVNT_MD) != 0) { - /* transfer completed successfully */ - au1550_spi_mask_ack_all(hw); - hw->rx_count = hw->len; - hw->tx_count = hw->len; - complete(&hw->master_done); - } - return IRQ_HANDLED; -} - - -/* routines to handle different word sizes in pio mode */ -#define AU1550_SPI_RX_WORD(size, mask) \ -static void au1550_spi_rx_word_##size(struct au1550_spi *hw) \ -{ \ - u32 fifoword = hw->regs->psc_spitxrx & (u32)(mask); \ - au_sync(); \ - if (hw->rx) { \ - *(u##size *)hw->rx = (u##size)fifoword; \ - hw->rx += (size) / 8; \ - } \ - hw->rx_count += (size) / 8; \ -} - -#define AU1550_SPI_TX_WORD(size, mask) \ -static void au1550_spi_tx_word_##size(struct au1550_spi *hw) \ -{ \ - u32 fifoword = 0; \ - if (hw->tx) { \ - fifoword = *(u##size *)hw->tx & (u32)(mask); \ - hw->tx += (size) / 8; \ - } \ - hw->tx_count += (size) / 8; \ - if (hw->tx_count >= hw->len) \ - fifoword |= PSC_SPITXRX_LC; \ - hw->regs->psc_spitxrx = fifoword; \ - au_sync(); \ -} - -AU1550_SPI_RX_WORD(8,0xff) -AU1550_SPI_RX_WORD(16,0xffff) -AU1550_SPI_RX_WORD(32,0xffffff) -AU1550_SPI_TX_WORD(8,0xff) -AU1550_SPI_TX_WORD(16,0xffff) -AU1550_SPI_TX_WORD(32,0xffffff) - -static int au1550_spi_pio_txrxb(struct spi_device *spi, struct spi_transfer *t) -{ - u32 stat, mask; - struct au1550_spi *hw = spi_master_get_devdata(spi->master); - - hw->tx = t->tx_buf; - hw->rx = t->rx_buf; - hw->len = t->len; - hw->tx_count = 0; - hw->rx_count = 0; - - /* by default enable nearly all events after filling tx fifo */ - mask = PSC_SPIMSK_SD; - - /* fill the transmit FIFO */ - while (hw->tx_count < hw->len) { - - hw->tx_word(hw); - - if (hw->tx_count >= hw->len) { - /* mask tx fifo request interrupt as we are done */ - mask |= PSC_SPIMSK_TR; - } - - stat = hw->regs->psc_spistat; - au_sync(); - if (stat & PSC_SPISTAT_TF) - break; - } - - /* enable event interrupts */ - hw->regs->psc_spimsk = mask; - au_sync(); - - /* start the transfer */ - hw->regs->psc_spipcr = PSC_SPIPCR_MS; - au_sync(); - - wait_for_completion(&hw->master_done); - - return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count; -} - -static irqreturn_t au1550_spi_pio_irq_callback(struct au1550_spi *hw) -{ - int busy; - u32 stat, evnt; - - stat = hw->regs->psc_spistat; - evnt = hw->regs->psc_spievent; - au_sync(); - if ((stat & PSC_SPISTAT_DI) == 0) { - dev_err(hw->dev, "Unexpected IRQ!\n"); - return IRQ_NONE; - } - - if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO - | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO - | PSC_SPIEVNT_SD)) - != 0) { - /* - * due to an error we consider transfer as done, - * so mask all events until before next transfer start - */ - au1550_spi_mask_ack_all(hw); - au1550_spi_reset_fifos(hw); - dev_err(hw->dev, - "pio transfer: unexpected SPI error " - "(event=0x%x stat=0x%x)!\n", evnt, stat); - complete(&hw->master_done); - return IRQ_HANDLED; - } - - /* - * while there is something to read from rx fifo - * or there is a space to write to tx fifo: - */ - do { - busy = 0; - stat = hw->regs->psc_spistat; - au_sync(); - - /* - * Take care to not let the Rx FIFO overflow. - * - * We only write a byte if we have read one at least. Initially, - * the write fifo is full, so we should read from the read fifo - * first. - * In case we miss a word from the read fifo, we should get a - * RO event and should back out. - */ - if (!(stat & PSC_SPISTAT_RE) && hw->rx_count < hw->len) { - hw->rx_word(hw); - busy = 1; - - if (!(stat & PSC_SPISTAT_TF) && hw->tx_count < hw->len) - hw->tx_word(hw); - } - } while (busy); - - hw->regs->psc_spievent = PSC_SPIEVNT_RR | PSC_SPIEVNT_TR; - au_sync(); - - /* - * Restart the SPI transmission in case of a transmit underflow. - * This seems to work despite the notes in the Au1550 data book - * of Figure 8-4 with flowchart for SPI master operation: - * - * """Note 1: An XFR Error Interrupt occurs, unless masked, - * for any of the following events: Tx FIFO Underflow, - * Rx FIFO Overflow, or Multiple-master Error - * Note 2: In case of a Tx Underflow Error, all zeroes are - * transmitted.""" - * - * By simply restarting the spi transfer on Tx Underflow Error, - * we assume that spi transfer was paused instead of zeroes - * transmittion mentioned in the Note 2 of Au1550 data book. - */ - if (evnt & PSC_SPIEVNT_TU) { - hw->regs->psc_spievent = PSC_SPIEVNT_TU | PSC_SPIEVNT_MD; - au_sync(); - hw->regs->psc_spipcr = PSC_SPIPCR_MS; - au_sync(); - } - - if (hw->rx_count >= hw->len) { - /* transfer completed successfully */ - au1550_spi_mask_ack_all(hw); - complete(&hw->master_done); - } - return IRQ_HANDLED; -} - -static int au1550_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) -{ - struct au1550_spi *hw = spi_master_get_devdata(spi->master); - return hw->txrx_bufs(spi, t); -} - -static irqreturn_t au1550_spi_irq(int irq, void *dev) -{ - struct au1550_spi *hw = dev; - return hw->irq_callback(hw); -} - -static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw) -{ - if (bpw <= 8) { - if (hw->usedma) { - hw->txrx_bufs = &au1550_spi_dma_txrxb; - hw->irq_callback = &au1550_spi_dma_irq_callback; - } else { - hw->rx_word = &au1550_spi_rx_word_8; - hw->tx_word = &au1550_spi_tx_word_8; - hw->txrx_bufs = &au1550_spi_pio_txrxb; - hw->irq_callback = &au1550_spi_pio_irq_callback; - } - } else if (bpw <= 16) { - hw->rx_word = &au1550_spi_rx_word_16; - hw->tx_word = &au1550_spi_tx_word_16; - hw->txrx_bufs = &au1550_spi_pio_txrxb; - hw->irq_callback = &au1550_spi_pio_irq_callback; - } else { - hw->rx_word = &au1550_spi_rx_word_32; - hw->tx_word = &au1550_spi_tx_word_32; - hw->txrx_bufs = &au1550_spi_pio_txrxb; - hw->irq_callback = &au1550_spi_pio_irq_callback; - } -} - -static void __init au1550_spi_setup_psc_as_spi(struct au1550_spi *hw) -{ - u32 stat, cfg; - - /* set up the PSC for SPI mode */ - hw->regs->psc_ctrl = PSC_CTRL_DISABLE; - au_sync(); - hw->regs->psc_sel = PSC_SEL_PS_SPIMODE; - au_sync(); - - hw->regs->psc_spicfg = 0; - au_sync(); - - hw->regs->psc_ctrl = PSC_CTRL_ENABLE; - au_sync(); - - do { - stat = hw->regs->psc_spistat; - au_sync(); - } while ((stat & PSC_SPISTAT_SR) == 0); - - - cfg = hw->usedma ? 0 : PSC_SPICFG_DD_DISABLE; - cfg |= PSC_SPICFG_SET_LEN(8); - cfg |= PSC_SPICFG_RT_FIFO8 | PSC_SPICFG_TT_FIFO8; - /* use minimal allowed brg and div values as initial setting: */ - cfg |= PSC_SPICFG_SET_BAUD(4) | PSC_SPICFG_SET_DIV(0); - -#ifdef AU1550_SPI_DEBUG_LOOPBACK - cfg |= PSC_SPICFG_LB; -#endif - - hw->regs->psc_spicfg = cfg; - au_sync(); - - au1550_spi_mask_ack_all(hw); - - hw->regs->psc_spicfg |= PSC_SPICFG_DE_ENABLE; - au_sync(); - - do { - stat = hw->regs->psc_spistat; - au_sync(); - } while ((stat & PSC_SPISTAT_DR) == 0); - - au1550_spi_reset_fifos(hw); -} - - -static int __init au1550_spi_probe(struct platform_device *pdev) -{ - struct au1550_spi *hw; - struct spi_master *master; - struct resource *r; - int err = 0; - - master = spi_alloc_master(&pdev->dev, sizeof(struct au1550_spi)); - if (master == NULL) { - dev_err(&pdev->dev, "No memory for spi_master\n"); - err = -ENOMEM; - goto err_nomem; - } - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST; - - hw = spi_master_get_devdata(master); - - hw->master = spi_master_get(master); - hw->pdata = pdev->dev.platform_data; - hw->dev = &pdev->dev; - - if (hw->pdata == NULL) { - dev_err(&pdev->dev, "No platform data supplied\n"); - err = -ENOENT; - goto err_no_pdata; - } - - r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!r) { - dev_err(&pdev->dev, "no IRQ\n"); - err = -ENODEV; - goto err_no_iores; - } - hw->irq = r->start; - - hw->usedma = 0; - r = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (r) { - hw->dma_tx_id = r->start; - r = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (r) { - hw->dma_rx_id = r->start; - if (usedma && ddma_memid) { - if (pdev->dev.dma_mask == NULL) - dev_warn(&pdev->dev, "no dma mask\n"); - else - hw->usedma = 1; - } - } - } - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - dev_err(&pdev->dev, "no mmio resource\n"); - err = -ENODEV; - goto err_no_iores; - } - - hw->ioarea = request_mem_region(r->start, sizeof(psc_spi_t), - pdev->name); - if (!hw->ioarea) { - dev_err(&pdev->dev, "Cannot reserve iomem region\n"); - err = -ENXIO; - goto err_no_iores; - } - - hw->regs = (psc_spi_t __iomem *)ioremap(r->start, sizeof(psc_spi_t)); - if (!hw->regs) { - dev_err(&pdev->dev, "cannot ioremap\n"); - err = -ENXIO; - goto err_ioremap; - } - - platform_set_drvdata(pdev, hw); - - init_completion(&hw->master_done); - - hw->bitbang.master = hw->master; - hw->bitbang.setup_transfer = au1550_spi_setupxfer; - hw->bitbang.chipselect = au1550_spi_chipsel; - hw->bitbang.master->setup = au1550_spi_setup; - hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs; - - if (hw->usedma) { - hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(ddma_memid, - hw->dma_tx_id, NULL, (void *)hw); - if (hw->dma_tx_ch == 0) { - dev_err(&pdev->dev, - "Cannot allocate tx dma channel\n"); - err = -ENXIO; - goto err_no_txdma; - } - au1xxx_dbdma_set_devwidth(hw->dma_tx_ch, 8); - if (au1xxx_dbdma_ring_alloc(hw->dma_tx_ch, - AU1550_SPI_DBDMA_DESCRIPTORS) == 0) { - dev_err(&pdev->dev, - "Cannot allocate tx dma descriptors\n"); - err = -ENXIO; - goto err_no_txdma_descr; - } - - - hw->dma_rx_ch = au1xxx_dbdma_chan_alloc(hw->dma_rx_id, - ddma_memid, NULL, (void *)hw); - if (hw->dma_rx_ch == 0) { - dev_err(&pdev->dev, - "Cannot allocate rx dma channel\n"); - err = -ENXIO; - goto err_no_rxdma; - } - au1xxx_dbdma_set_devwidth(hw->dma_rx_ch, 8); - if (au1xxx_dbdma_ring_alloc(hw->dma_rx_ch, - AU1550_SPI_DBDMA_DESCRIPTORS) == 0) { - dev_err(&pdev->dev, - "Cannot allocate rx dma descriptors\n"); - err = -ENXIO; - goto err_no_rxdma_descr; - } - - err = au1550_spi_dma_rxtmp_alloc(hw, - AU1550_SPI_DMA_RXTMP_MINSIZE); - if (err < 0) { - dev_err(&pdev->dev, - "Cannot allocate initial rx dma tmp buffer\n"); - goto err_dma_rxtmp_alloc; - } - } - - au1550_spi_bits_handlers_set(hw, 8); - - err = request_irq(hw->irq, au1550_spi_irq, 0, pdev->name, hw); - if (err) { - dev_err(&pdev->dev, "Cannot claim IRQ\n"); - goto err_no_irq; - } - - master->bus_num = pdev->id; - master->num_chipselect = hw->pdata->num_chipselect; - - /* - * precompute valid range for spi freq - from au1550 datasheet: - * psc_tempclk = psc_mainclk / (2 << DIV) - * spiclk = psc_tempclk / (2 * (BRG + 1)) - * BRG valid range is 4..63 - * DIV valid range is 0..3 - * round the min and max frequencies to values that would still - * produce valid brg and div - */ - { - int min_div = (2 << 0) * (2 * (4 + 1)); - int max_div = (2 << 3) * (2 * (63 + 1)); - hw->freq_max = hw->pdata->mainclk_hz / min_div; - hw->freq_min = hw->pdata->mainclk_hz / (max_div + 1) + 1; - } - - au1550_spi_setup_psc_as_spi(hw); - - err = spi_bitbang_start(&hw->bitbang); - if (err) { - dev_err(&pdev->dev, "Failed to register SPI master\n"); - goto err_register; - } - - dev_info(&pdev->dev, - "spi master registered: bus_num=%d num_chipselect=%d\n", - master->bus_num, master->num_chipselect); - - return 0; - -err_register: - free_irq(hw->irq, hw); - -err_no_irq: - au1550_spi_dma_rxtmp_free(hw); - -err_dma_rxtmp_alloc: -err_no_rxdma_descr: - if (hw->usedma) - au1xxx_dbdma_chan_free(hw->dma_rx_ch); - -err_no_rxdma: -err_no_txdma_descr: - if (hw->usedma) - au1xxx_dbdma_chan_free(hw->dma_tx_ch); - -err_no_txdma: - iounmap((void __iomem *)hw->regs); - -err_ioremap: - release_resource(hw->ioarea); - kfree(hw->ioarea); - -err_no_iores: -err_no_pdata: - spi_master_put(hw->master); - -err_nomem: - return err; -} - -static int __exit au1550_spi_remove(struct platform_device *pdev) -{ - struct au1550_spi *hw = platform_get_drvdata(pdev); - - dev_info(&pdev->dev, "spi master remove: bus_num=%d\n", - hw->master->bus_num); - - spi_bitbang_stop(&hw->bitbang); - free_irq(hw->irq, hw); - iounmap((void __iomem *)hw->regs); - release_resource(hw->ioarea); - kfree(hw->ioarea); - - if (hw->usedma) { - au1550_spi_dma_rxtmp_free(hw); - au1xxx_dbdma_chan_free(hw->dma_rx_ch); - au1xxx_dbdma_chan_free(hw->dma_tx_ch); - } - - platform_set_drvdata(pdev, NULL); - - spi_master_put(hw->master); - return 0; -} - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:au1550-spi"); - -static struct platform_driver au1550_spi_drv = { - .remove = __exit_p(au1550_spi_remove), - .driver = { - .name = "au1550-spi", - .owner = THIS_MODULE, - }, -}; - -static int __init au1550_spi_init(void) -{ - /* - * create memory device with 8 bits dev_devwidth - * needed for proper byte ordering to spi fifo - */ - if (usedma) { - ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev); - if (!ddma_memid) - printk(KERN_ERR "au1550-spi: cannot add memory" - "dbdma device\n"); - } - return platform_driver_probe(&au1550_spi_drv, au1550_spi_probe); -} -module_init(au1550_spi_init); - -static void __exit au1550_spi_exit(void) -{ - if (usedma && ddma_memid) - au1xxx_ddma_del_device(ddma_memid); - platform_driver_unregister(&au1550_spi_drv); -} -module_exit(au1550_spi_exit); - -MODULE_DESCRIPTION("Au1550 PSC SPI Driver"); -MODULE_AUTHOR("Jan Nikitenko "); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/coldfire_qspi.c b/drivers/spi/coldfire_qspi.c deleted file mode 100644 index ae2cd1c1fda8..000000000000 --- a/drivers/spi/coldfire_qspi.c +++ /dev/null @@ -1,642 +0,0 @@ -/* - * Freescale/Motorola Coldfire Queued SPI driver - * - * Copyright 2010 Steven King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA - * -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define DRIVER_NAME "mcfqspi" - -#define MCFQSPI_BUSCLK (MCF_BUSCLK / 2) - -#define MCFQSPI_QMR 0x00 -#define MCFQSPI_QMR_MSTR 0x8000 -#define MCFQSPI_QMR_CPOL 0x0200 -#define MCFQSPI_QMR_CPHA 0x0100 -#define MCFQSPI_QDLYR 0x04 -#define MCFQSPI_QDLYR_SPE 0x8000 -#define MCFQSPI_QWR 0x08 -#define MCFQSPI_QWR_HALT 0x8000 -#define MCFQSPI_QWR_WREN 0x4000 -#define MCFQSPI_QWR_CSIV 0x1000 -#define MCFQSPI_QIR 0x0C -#define MCFQSPI_QIR_WCEFB 0x8000 -#define MCFQSPI_QIR_ABRTB 0x4000 -#define MCFQSPI_QIR_ABRTL 0x1000 -#define MCFQSPI_QIR_WCEFE 0x0800 -#define MCFQSPI_QIR_ABRTE 0x0400 -#define MCFQSPI_QIR_SPIFE 0x0100 -#define MCFQSPI_QIR_WCEF 0x0008 -#define MCFQSPI_QIR_ABRT 0x0004 -#define MCFQSPI_QIR_SPIF 0x0001 -#define MCFQSPI_QAR 0x010 -#define MCFQSPI_QAR_TXBUF 0x00 -#define MCFQSPI_QAR_RXBUF 0x10 -#define MCFQSPI_QAR_CMDBUF 0x20 -#define MCFQSPI_QDR 0x014 -#define MCFQSPI_QCR 0x014 -#define MCFQSPI_QCR_CONT 0x8000 -#define MCFQSPI_QCR_BITSE 0x4000 -#define MCFQSPI_QCR_DT 0x2000 - -struct mcfqspi { - void __iomem *iobase; - int irq; - struct clk *clk; - struct mcfqspi_cs_control *cs_control; - - wait_queue_head_t waitq; - - struct work_struct work; - struct workqueue_struct *workq; - spinlock_t lock; - struct list_head msgq; -}; - -static void mcfqspi_wr_qmr(struct mcfqspi *mcfqspi, u16 val) -{ - writew(val, mcfqspi->iobase + MCFQSPI_QMR); -} - -static void mcfqspi_wr_qdlyr(struct mcfqspi *mcfqspi, u16 val) -{ - writew(val, mcfqspi->iobase + MCFQSPI_QDLYR); -} - -static u16 mcfqspi_rd_qdlyr(struct mcfqspi *mcfqspi) -{ - return readw(mcfqspi->iobase + MCFQSPI_QDLYR); -} - -static void mcfqspi_wr_qwr(struct mcfqspi *mcfqspi, u16 val) -{ - writew(val, mcfqspi->iobase + MCFQSPI_QWR); -} - -static void mcfqspi_wr_qir(struct mcfqspi *mcfqspi, u16 val) -{ - writew(val, mcfqspi->iobase + MCFQSPI_QIR); -} - -static void mcfqspi_wr_qar(struct mcfqspi *mcfqspi, u16 val) -{ - writew(val, mcfqspi->iobase + MCFQSPI_QAR); -} - -static void mcfqspi_wr_qdr(struct mcfqspi *mcfqspi, u16 val) -{ - writew(val, mcfqspi->iobase + MCFQSPI_QDR); -} - -static u16 mcfqspi_rd_qdr(struct mcfqspi *mcfqspi) -{ - return readw(mcfqspi->iobase + MCFQSPI_QDR); -} - -static void mcfqspi_cs_select(struct mcfqspi *mcfqspi, u8 chip_select, - bool cs_high) -{ - mcfqspi->cs_control->select(mcfqspi->cs_control, chip_select, cs_high); -} - -static void mcfqspi_cs_deselect(struct mcfqspi *mcfqspi, u8 chip_select, - bool cs_high) -{ - mcfqspi->cs_control->deselect(mcfqspi->cs_control, chip_select, cs_high); -} - -static int mcfqspi_cs_setup(struct mcfqspi *mcfqspi) -{ - return (mcfqspi->cs_control && mcfqspi->cs_control->setup) ? - mcfqspi->cs_control->setup(mcfqspi->cs_control) : 0; -} - -static void mcfqspi_cs_teardown(struct mcfqspi *mcfqspi) -{ - if (mcfqspi->cs_control && mcfqspi->cs_control->teardown) - mcfqspi->cs_control->teardown(mcfqspi->cs_control); -} - -static u8 mcfqspi_qmr_baud(u32 speed_hz) -{ - return clamp((MCFQSPI_BUSCLK + speed_hz - 1) / speed_hz, 2u, 255u); -} - -static bool mcfqspi_qdlyr_spe(struct mcfqspi *mcfqspi) -{ - return mcfqspi_rd_qdlyr(mcfqspi) & MCFQSPI_QDLYR_SPE; -} - -static irqreturn_t mcfqspi_irq_handler(int this_irq, void *dev_id) -{ - struct mcfqspi *mcfqspi = dev_id; - - /* clear interrupt */ - mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE | MCFQSPI_QIR_SPIF); - wake_up(&mcfqspi->waitq); - - return IRQ_HANDLED; -} - -static void mcfqspi_transfer_msg8(struct mcfqspi *mcfqspi, unsigned count, - const u8 *txbuf, u8 *rxbuf) -{ - unsigned i, n, offset = 0; - - n = min(count, 16u); - - mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_CMDBUF); - for (i = 0; i < n; ++i) - mcfqspi_wr_qdr(mcfqspi, MCFQSPI_QCR_BITSE); - - mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_TXBUF); - if (txbuf) - for (i = 0; i < n; ++i) - mcfqspi_wr_qdr(mcfqspi, *txbuf++); - else - for (i = 0; i < count; ++i) - mcfqspi_wr_qdr(mcfqspi, 0); - - count -= n; - if (count) { - u16 qwr = 0xf08; - mcfqspi_wr_qwr(mcfqspi, 0x700); - mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); - - do { - wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); - mcfqspi_wr_qwr(mcfqspi, qwr); - mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); - if (rxbuf) { - mcfqspi_wr_qar(mcfqspi, - MCFQSPI_QAR_RXBUF + offset); - for (i = 0; i < 8; ++i) - *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); - } - n = min(count, 8u); - if (txbuf) { - mcfqspi_wr_qar(mcfqspi, - MCFQSPI_QAR_TXBUF + offset); - for (i = 0; i < n; ++i) - mcfqspi_wr_qdr(mcfqspi, *txbuf++); - } - qwr = (offset ? 0x808 : 0) + ((n - 1) << 8); - offset ^= 8; - count -= n; - } while (count); - wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); - mcfqspi_wr_qwr(mcfqspi, qwr); - mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); - if (rxbuf) { - mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); - for (i = 0; i < 8; ++i) - *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); - offset ^= 8; - } - } else { - mcfqspi_wr_qwr(mcfqspi, (n - 1) << 8); - mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); - } - wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); - if (rxbuf) { - mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); - for (i = 0; i < n; ++i) - *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); - } -} - -static void mcfqspi_transfer_msg16(struct mcfqspi *mcfqspi, unsigned count, - const u16 *txbuf, u16 *rxbuf) -{ - unsigned i, n, offset = 0; - - n = min(count, 16u); - - mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_CMDBUF); - for (i = 0; i < n; ++i) - mcfqspi_wr_qdr(mcfqspi, MCFQSPI_QCR_BITSE); - - mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_TXBUF); - if (txbuf) - for (i = 0; i < n; ++i) - mcfqspi_wr_qdr(mcfqspi, *txbuf++); - else - for (i = 0; i < count; ++i) - mcfqspi_wr_qdr(mcfqspi, 0); - - count -= n; - if (count) { - u16 qwr = 0xf08; - mcfqspi_wr_qwr(mcfqspi, 0x700); - mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); - - do { - wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); - mcfqspi_wr_qwr(mcfqspi, qwr); - mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); - if (rxbuf) { - mcfqspi_wr_qar(mcfqspi, - MCFQSPI_QAR_RXBUF + offset); - for (i = 0; i < 8; ++i) - *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); - } - n = min(count, 8u); - if (txbuf) { - mcfqspi_wr_qar(mcfqspi, - MCFQSPI_QAR_TXBUF + offset); - for (i = 0; i < n; ++i) - mcfqspi_wr_qdr(mcfqspi, *txbuf++); - } - qwr = (offset ? 0x808 : 0x000) + ((n - 1) << 8); - offset ^= 8; - count -= n; - } while (count); - wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); - mcfqspi_wr_qwr(mcfqspi, qwr); - mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); - if (rxbuf) { - mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); - for (i = 0; i < 8; ++i) - *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); - offset ^= 8; - } - } else { - mcfqspi_wr_qwr(mcfqspi, (n - 1) << 8); - mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); - } - wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); - if (rxbuf) { - mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); - for (i = 0; i < n; ++i) - *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); - } -} - -static void mcfqspi_work(struct work_struct *work) -{ - struct mcfqspi *mcfqspi = container_of(work, struct mcfqspi, work); - unsigned long flags; - - spin_lock_irqsave(&mcfqspi->lock, flags); - while (!list_empty(&mcfqspi->msgq)) { - struct spi_message *msg; - struct spi_device *spi; - struct spi_transfer *xfer; - int status = 0; - - msg = container_of(mcfqspi->msgq.next, struct spi_message, - queue); - - list_del_init(&msg->queue); - spin_unlock_irqrestore(&mcfqspi->lock, flags); - - spi = msg->spi; - - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - bool cs_high = spi->mode & SPI_CS_HIGH; - u16 qmr = MCFQSPI_QMR_MSTR; - - if (xfer->bits_per_word) - qmr |= xfer->bits_per_word << 10; - else - qmr |= spi->bits_per_word << 10; - if (spi->mode & SPI_CPHA) - qmr |= MCFQSPI_QMR_CPHA; - if (spi->mode & SPI_CPOL) - qmr |= MCFQSPI_QMR_CPOL; - if (xfer->speed_hz) - qmr |= mcfqspi_qmr_baud(xfer->speed_hz); - else - qmr |= mcfqspi_qmr_baud(spi->max_speed_hz); - mcfqspi_wr_qmr(mcfqspi, qmr); - - mcfqspi_cs_select(mcfqspi, spi->chip_select, cs_high); - - mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE); - if ((xfer->bits_per_word ? xfer->bits_per_word : - spi->bits_per_word) == 8) - mcfqspi_transfer_msg8(mcfqspi, xfer->len, - xfer->tx_buf, - xfer->rx_buf); - else - mcfqspi_transfer_msg16(mcfqspi, xfer->len / 2, - xfer->tx_buf, - xfer->rx_buf); - mcfqspi_wr_qir(mcfqspi, 0); - - if (xfer->delay_usecs) - udelay(xfer->delay_usecs); - if (xfer->cs_change) { - if (!list_is_last(&xfer->transfer_list, - &msg->transfers)) - mcfqspi_cs_deselect(mcfqspi, - spi->chip_select, - cs_high); - } else { - if (list_is_last(&xfer->transfer_list, - &msg->transfers)) - mcfqspi_cs_deselect(mcfqspi, - spi->chip_select, - cs_high); - } - msg->actual_length += xfer->len; - } - msg->status = status; - msg->complete(msg->context); - - spin_lock_irqsave(&mcfqspi->lock, flags); - } - spin_unlock_irqrestore(&mcfqspi->lock, flags); -} - -static int mcfqspi_transfer(struct spi_device *spi, struct spi_message *msg) -{ - struct mcfqspi *mcfqspi; - struct spi_transfer *xfer; - unsigned long flags; - - mcfqspi = spi_master_get_devdata(spi->master); - - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - if (xfer->bits_per_word && ((xfer->bits_per_word < 8) - || (xfer->bits_per_word > 16))) { - dev_dbg(&spi->dev, - "%d bits per word is not supported\n", - xfer->bits_per_word); - goto fail; - } - if (xfer->speed_hz) { - u32 real_speed = MCFQSPI_BUSCLK / - mcfqspi_qmr_baud(xfer->speed_hz); - if (real_speed != xfer->speed_hz) - dev_dbg(&spi->dev, - "using speed %d instead of %d\n", - real_speed, xfer->speed_hz); - } - } - msg->status = -EINPROGRESS; - msg->actual_length = 0; - - spin_lock_irqsave(&mcfqspi->lock, flags); - list_add_tail(&msg->queue, &mcfqspi->msgq); - queue_work(mcfqspi->workq, &mcfqspi->work); - spin_unlock_irqrestore(&mcfqspi->lock, flags); - - return 0; -fail: - msg->status = -EINVAL; - return -EINVAL; -} - -static int mcfqspi_setup(struct spi_device *spi) -{ - if ((spi->bits_per_word < 8) || (spi->bits_per_word > 16)) { - dev_dbg(&spi->dev, "%d bits per word is not supported\n", - spi->bits_per_word); - return -EINVAL; - } - if (spi->chip_select >= spi->master->num_chipselect) { - dev_dbg(&spi->dev, "%d chip select is out of range\n", - spi->chip_select); - return -EINVAL; - } - - mcfqspi_cs_deselect(spi_master_get_devdata(spi->master), - spi->chip_select, spi->mode & SPI_CS_HIGH); - - dev_dbg(&spi->dev, - "bits per word %d, chip select %d, speed %d KHz\n", - spi->bits_per_word, spi->chip_select, - (MCFQSPI_BUSCLK / mcfqspi_qmr_baud(spi->max_speed_hz)) - / 1000); - - return 0; -} - -static int __devinit mcfqspi_probe(struct platform_device *pdev) -{ - struct spi_master *master; - struct mcfqspi *mcfqspi; - struct resource *res; - struct mcfqspi_platform_data *pdata; - int status; - - master = spi_alloc_master(&pdev->dev, sizeof(*mcfqspi)); - if (master == NULL) { - dev_dbg(&pdev->dev, "spi_alloc_master failed\n"); - return -ENOMEM; - } - - mcfqspi = spi_master_get_devdata(master); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_dbg(&pdev->dev, "platform_get_resource failed\n"); - status = -ENXIO; - goto fail0; - } - - if (!request_mem_region(res->start, resource_size(res), pdev->name)) { - dev_dbg(&pdev->dev, "request_mem_region failed\n"); - status = -EBUSY; - goto fail0; - } - - mcfqspi->iobase = ioremap(res->start, resource_size(res)); - if (!mcfqspi->iobase) { - dev_dbg(&pdev->dev, "ioremap failed\n"); - status = -ENOMEM; - goto fail1; - } - - mcfqspi->irq = platform_get_irq(pdev, 0); - if (mcfqspi->irq < 0) { - dev_dbg(&pdev->dev, "platform_get_irq failed\n"); - status = -ENXIO; - goto fail2; - } - - status = request_irq(mcfqspi->irq, mcfqspi_irq_handler, IRQF_DISABLED, - pdev->name, mcfqspi); - if (status) { - dev_dbg(&pdev->dev, "request_irq failed\n"); - goto fail2; - } - - mcfqspi->clk = clk_get(&pdev->dev, "qspi_clk"); - if (IS_ERR(mcfqspi->clk)) { - dev_dbg(&pdev->dev, "clk_get failed\n"); - status = PTR_ERR(mcfqspi->clk); - goto fail3; - } - clk_enable(mcfqspi->clk); - - mcfqspi->workq = create_singlethread_workqueue(dev_name(master->dev.parent)); - if (!mcfqspi->workq) { - dev_dbg(&pdev->dev, "create_workqueue failed\n"); - status = -ENOMEM; - goto fail4; - } - INIT_WORK(&mcfqspi->work, mcfqspi_work); - spin_lock_init(&mcfqspi->lock); - INIT_LIST_HEAD(&mcfqspi->msgq); - init_waitqueue_head(&mcfqspi->waitq); - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_dbg(&pdev->dev, "platform data is missing\n"); - goto fail5; - } - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->num_chipselect; - - mcfqspi->cs_control = pdata->cs_control; - status = mcfqspi_cs_setup(mcfqspi); - if (status) { - dev_dbg(&pdev->dev, "error initializing cs_control\n"); - goto fail5; - } - - master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA; - master->setup = mcfqspi_setup; - master->transfer = mcfqspi_transfer; - - platform_set_drvdata(pdev, master); - - status = spi_register_master(master); - if (status) { - dev_dbg(&pdev->dev, "spi_register_master failed\n"); - goto fail6; - } - dev_info(&pdev->dev, "Coldfire QSPI bus driver\n"); - - return 0; - -fail6: - mcfqspi_cs_teardown(mcfqspi); -fail5: - destroy_workqueue(mcfqspi->workq); -fail4: - clk_disable(mcfqspi->clk); - clk_put(mcfqspi->clk); -fail3: - free_irq(mcfqspi->irq, mcfqspi); -fail2: - iounmap(mcfqspi->iobase); -fail1: - release_mem_region(res->start, resource_size(res)); -fail0: - spi_master_put(master); - - dev_dbg(&pdev->dev, "Coldfire QSPI probe failed\n"); - - return status; -} - -static int __devexit mcfqspi_remove(struct platform_device *pdev) -{ - struct spi_master *master = platform_get_drvdata(pdev); - struct mcfqspi *mcfqspi = spi_master_get_devdata(master); - struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - /* disable the hardware (set the baud rate to 0) */ - mcfqspi_wr_qmr(mcfqspi, MCFQSPI_QMR_MSTR); - - platform_set_drvdata(pdev, NULL); - mcfqspi_cs_teardown(mcfqspi); - destroy_workqueue(mcfqspi->workq); - clk_disable(mcfqspi->clk); - clk_put(mcfqspi->clk); - free_irq(mcfqspi->irq, mcfqspi); - iounmap(mcfqspi->iobase); - release_mem_region(res->start, resource_size(res)); - spi_unregister_master(master); - spi_master_put(master); - - return 0; -} - -#ifdef CONFIG_PM - -static int mcfqspi_suspend(struct device *dev) -{ - struct mcfqspi *mcfqspi = platform_get_drvdata(to_platform_device(dev)); - - clk_disable(mcfqspi->clk); - - return 0; -} - -static int mcfqspi_resume(struct device *dev) -{ - struct mcfqspi *mcfqspi = platform_get_drvdata(to_platform_device(dev)); - - clk_enable(mcfqspi->clk); - - return 0; -} - -static struct dev_pm_ops mcfqspi_dev_pm_ops = { - .suspend = mcfqspi_suspend, - .resume = mcfqspi_resume, -}; - -#define MCFQSPI_DEV_PM_OPS (&mcfqspi_dev_pm_ops) -#else -#define MCFQSPI_DEV_PM_OPS NULL -#endif - -static struct platform_driver mcfqspi_driver = { - .driver.name = DRIVER_NAME, - .driver.owner = THIS_MODULE, - .driver.pm = MCFQSPI_DEV_PM_OPS, - .remove = __devexit_p(mcfqspi_remove), -}; - -static int __init mcfqspi_init(void) -{ - return platform_driver_probe(&mcfqspi_driver, mcfqspi_probe); -} -module_init(mcfqspi_init); - -static void __exit mcfqspi_exit(void) -{ - platform_driver_unregister(&mcfqspi_driver); -} -module_exit(mcfqspi_exit); - -MODULE_AUTHOR("Steven King "); -MODULE_DESCRIPTION("Coldfire QSPI Controller Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c deleted file mode 100644 index 1f0ed8005c91..000000000000 --- a/drivers/spi/davinci_spi.c +++ /dev/null @@ -1,1030 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments. - * Copyright (C) 2010 EF Johnson Technologies - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define SPI_NO_RESOURCE ((resource_size_t)-1) - -#define SPI_MAX_CHIPSELECT 2 - -#define CS_DEFAULT 0xFF - -#define SPIFMT_PHASE_MASK BIT(16) -#define SPIFMT_POLARITY_MASK BIT(17) -#define SPIFMT_DISTIMER_MASK BIT(18) -#define SPIFMT_SHIFTDIR_MASK BIT(20) -#define SPIFMT_WAITENA_MASK BIT(21) -#define SPIFMT_PARITYENA_MASK BIT(22) -#define SPIFMT_ODD_PARITY_MASK BIT(23) -#define SPIFMT_WDELAY_MASK 0x3f000000u -#define SPIFMT_WDELAY_SHIFT 24 -#define SPIFMT_PRESCALE_SHIFT 8 - -/* SPIPC0 */ -#define SPIPC0_DIFUN_MASK BIT(11) /* MISO */ -#define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */ -#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */ -#define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */ - -#define SPIINT_MASKALL 0x0101035F -#define SPIINT_MASKINT 0x0000015F -#define SPI_INTLVL_1 0x000001FF -#define SPI_INTLVL_0 0x00000000 - -/* SPIDAT1 (upper 16 bit defines) */ -#define SPIDAT1_CSHOLD_MASK BIT(12) - -/* SPIGCR1 */ -#define SPIGCR1_CLKMOD_MASK BIT(1) -#define SPIGCR1_MASTER_MASK BIT(0) -#define SPIGCR1_POWERDOWN_MASK BIT(8) -#define SPIGCR1_LOOPBACK_MASK BIT(16) -#define SPIGCR1_SPIENA_MASK BIT(24) - -/* SPIBUF */ -#define SPIBUF_TXFULL_MASK BIT(29) -#define SPIBUF_RXEMPTY_MASK BIT(31) - -/* SPIDELAY */ -#define SPIDELAY_C2TDELAY_SHIFT 24 -#define SPIDELAY_C2TDELAY_MASK (0xFF << SPIDELAY_C2TDELAY_SHIFT) -#define SPIDELAY_T2CDELAY_SHIFT 16 -#define SPIDELAY_T2CDELAY_MASK (0xFF << SPIDELAY_T2CDELAY_SHIFT) -#define SPIDELAY_T2EDELAY_SHIFT 8 -#define SPIDELAY_T2EDELAY_MASK (0xFF << SPIDELAY_T2EDELAY_SHIFT) -#define SPIDELAY_C2EDELAY_SHIFT 0 -#define SPIDELAY_C2EDELAY_MASK 0xFF - -/* Error Masks */ -#define SPIFLG_DLEN_ERR_MASK BIT(0) -#define SPIFLG_TIMEOUT_MASK BIT(1) -#define SPIFLG_PARERR_MASK BIT(2) -#define SPIFLG_DESYNC_MASK BIT(3) -#define SPIFLG_BITERR_MASK BIT(4) -#define SPIFLG_OVRRUN_MASK BIT(6) -#define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24) -#define SPIFLG_ERROR_MASK (SPIFLG_DLEN_ERR_MASK \ - | SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \ - | SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \ - | SPIFLG_OVRRUN_MASK) - -#define SPIINT_DMA_REQ_EN BIT(16) - -/* SPI Controller registers */ -#define SPIGCR0 0x00 -#define SPIGCR1 0x04 -#define SPIINT 0x08 -#define SPILVL 0x0c -#define SPIFLG 0x10 -#define SPIPC0 0x14 -#define SPIDAT1 0x3c -#define SPIBUF 0x40 -#define SPIDELAY 0x48 -#define SPIDEF 0x4c -#define SPIFMT0 0x50 - -/* We have 2 DMA channels per CS, one for RX and one for TX */ -struct davinci_spi_dma { - int tx_channel; - int rx_channel; - int dummy_param_slot; - enum dma_event_q eventq; -}; - -/* SPI Controller driver's private data. */ -struct davinci_spi { - struct spi_bitbang bitbang; - struct clk *clk; - - u8 version; - resource_size_t pbase; - void __iomem *base; - u32 irq; - struct completion done; - - const void *tx; - void *rx; -#define SPI_TMP_BUFSZ (SMP_CACHE_BYTES + 1) - u8 rx_tmp_buf[SPI_TMP_BUFSZ]; - int rcount; - int wcount; - struct davinci_spi_dma dma; - struct davinci_spi_platform_data *pdata; - - void (*get_rx)(u32 rx_data, struct davinci_spi *); - u32 (*get_tx)(struct davinci_spi *); - - u8 bytes_per_word[SPI_MAX_CHIPSELECT]; -}; - -static struct davinci_spi_config davinci_spi_default_cfg; - -static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *dspi) -{ - if (dspi->rx) { - u8 *rx = dspi->rx; - *rx++ = (u8)data; - dspi->rx = rx; - } -} - -static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *dspi) -{ - if (dspi->rx) { - u16 *rx = dspi->rx; - *rx++ = (u16)data; - dspi->rx = rx; - } -} - -static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi) -{ - u32 data = 0; - if (dspi->tx) { - const u8 *tx = dspi->tx; - data = *tx++; - dspi->tx = tx; - } - return data; -} - -static u32 davinci_spi_tx_buf_u16(struct davinci_spi *dspi) -{ - u32 data = 0; - if (dspi->tx) { - const u16 *tx = dspi->tx; - data = *tx++; - dspi->tx = tx; - } - return data; -} - -static inline void set_io_bits(void __iomem *addr, u32 bits) -{ - u32 v = ioread32(addr); - - v |= bits; - iowrite32(v, addr); -} - -static inline void clear_io_bits(void __iomem *addr, u32 bits) -{ - u32 v = ioread32(addr); - - v &= ~bits; - iowrite32(v, addr); -} - -/* - * Interface to control the chip select signal - */ -static void davinci_spi_chipselect(struct spi_device *spi, int value) -{ - struct davinci_spi *dspi; - struct davinci_spi_platform_data *pdata; - u8 chip_sel = spi->chip_select; - u16 spidat1 = CS_DEFAULT; - bool gpio_chipsel = false; - - dspi = spi_master_get_devdata(spi->master); - pdata = dspi->pdata; - - if (pdata->chip_sel && chip_sel < pdata->num_chipselect && - pdata->chip_sel[chip_sel] != SPI_INTERN_CS) - gpio_chipsel = true; - - /* - * Board specific chip select logic decides the polarity and cs - * line for the controller - */ - if (gpio_chipsel) { - if (value == BITBANG_CS_ACTIVE) - gpio_set_value(pdata->chip_sel[chip_sel], 0); - else - gpio_set_value(pdata->chip_sel[chip_sel], 1); - } else { - if (value == BITBANG_CS_ACTIVE) { - spidat1 |= SPIDAT1_CSHOLD_MASK; - spidat1 &= ~(0x1 << chip_sel); - } - - iowrite16(spidat1, dspi->base + SPIDAT1 + 2); - } -} - -/** - * davinci_spi_get_prescale - Calculates the correct prescale value - * @maxspeed_hz: the maximum rate the SPI clock can run at - * - * This function calculates the prescale value that generates a clock rate - * less than or equal to the specified maximum. - * - * Returns: calculated prescale - 1 for easy programming into SPI registers - * or negative error number if valid prescalar cannot be updated. - */ -static inline int davinci_spi_get_prescale(struct davinci_spi *dspi, - u32 max_speed_hz) -{ - int ret; - - ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz); - - if (ret < 3 || ret > 256) - return -EINVAL; - - return ret - 1; -} - -/** - * davinci_spi_setup_transfer - This functions will determine transfer method - * @spi: spi device on which data transfer to be done - * @t: spi transfer in which transfer info is filled - * - * This function determines data transfer method (8/16/32 bit transfer). - * It will also set the SPI Clock Control register according to - * SPI slave device freq. - */ -static int davinci_spi_setup_transfer(struct spi_device *spi, - struct spi_transfer *t) -{ - - struct davinci_spi *dspi; - struct davinci_spi_config *spicfg; - u8 bits_per_word = 0; - u32 hz = 0, spifmt = 0, prescale = 0; - - dspi = spi_master_get_devdata(spi->master); - spicfg = (struct davinci_spi_config *)spi->controller_data; - if (!spicfg) - spicfg = &davinci_spi_default_cfg; - - if (t) { - bits_per_word = t->bits_per_word; - hz = t->speed_hz; - } - - /* if bits_per_word is not set then set it default */ - if (!bits_per_word) - bits_per_word = spi->bits_per_word; - - /* - * Assign function pointer to appropriate transfer method - * 8bit, 16bit or 32bit transfer - */ - if (bits_per_word <= 8 && bits_per_word >= 2) { - dspi->get_rx = davinci_spi_rx_buf_u8; - dspi->get_tx = davinci_spi_tx_buf_u8; - dspi->bytes_per_word[spi->chip_select] = 1; - } else if (bits_per_word <= 16 && bits_per_word >= 2) { - dspi->get_rx = davinci_spi_rx_buf_u16; - dspi->get_tx = davinci_spi_tx_buf_u16; - dspi->bytes_per_word[spi->chip_select] = 2; - } else - return -EINVAL; - - if (!hz) - hz = spi->max_speed_hz; - - /* Set up SPIFMTn register, unique to this chipselect. */ - - prescale = davinci_spi_get_prescale(dspi, hz); - if (prescale < 0) - return prescale; - - spifmt = (prescale << SPIFMT_PRESCALE_SHIFT) | (bits_per_word & 0x1f); - - if (spi->mode & SPI_LSB_FIRST) - spifmt |= SPIFMT_SHIFTDIR_MASK; - - if (spi->mode & SPI_CPOL) - spifmt |= SPIFMT_POLARITY_MASK; - - if (!(spi->mode & SPI_CPHA)) - spifmt |= SPIFMT_PHASE_MASK; - - /* - * Version 1 hardware supports two basic SPI modes: - * - Standard SPI mode uses 4 pins, with chipselect - * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS) - * (distinct from SPI_3WIRE, with just one data wire; - * or similar variants without MOSI or without MISO) - * - * Version 2 hardware supports an optional handshaking signal, - * so it can support two more modes: - * - 5 pin SPI variant is standard SPI plus SPI_READY - * - 4 pin with enable is (SPI_READY | SPI_NO_CS) - */ - - if (dspi->version == SPI_VERSION_2) { - - u32 delay = 0; - - spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT) - & SPIFMT_WDELAY_MASK); - - if (spicfg->odd_parity) - spifmt |= SPIFMT_ODD_PARITY_MASK; - - if (spicfg->parity_enable) - spifmt |= SPIFMT_PARITYENA_MASK; - - if (spicfg->timer_disable) { - spifmt |= SPIFMT_DISTIMER_MASK; - } else { - delay |= (spicfg->c2tdelay << SPIDELAY_C2TDELAY_SHIFT) - & SPIDELAY_C2TDELAY_MASK; - delay |= (spicfg->t2cdelay << SPIDELAY_T2CDELAY_SHIFT) - & SPIDELAY_T2CDELAY_MASK; - } - - if (spi->mode & SPI_READY) { - spifmt |= SPIFMT_WAITENA_MASK; - delay |= (spicfg->t2edelay << SPIDELAY_T2EDELAY_SHIFT) - & SPIDELAY_T2EDELAY_MASK; - delay |= (spicfg->c2edelay << SPIDELAY_C2EDELAY_SHIFT) - & SPIDELAY_C2EDELAY_MASK; - } - - iowrite32(delay, dspi->base + SPIDELAY); - } - - iowrite32(spifmt, dspi->base + SPIFMT0); - - return 0; -} - -/** - * davinci_spi_setup - This functions will set default transfer method - * @spi: spi device on which data transfer to be done - * - * This functions sets the default transfer method. - */ -static int davinci_spi_setup(struct spi_device *spi) -{ - int retval = 0; - struct davinci_spi *dspi; - struct davinci_spi_platform_data *pdata; - - dspi = spi_master_get_devdata(spi->master); - pdata = dspi->pdata; - - /* if bits per word length is zero then set it default 8 */ - if (!spi->bits_per_word) - spi->bits_per_word = 8; - - if (!(spi->mode & SPI_NO_CS)) { - if ((pdata->chip_sel == NULL) || - (pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS)) - set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select); - - } - - if (spi->mode & SPI_READY) - set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK); - - if (spi->mode & SPI_LOOP) - set_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK); - else - clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK); - - return retval; -} - -static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status) -{ - struct device *sdev = dspi->bitbang.master->dev.parent; - - if (int_status & SPIFLG_TIMEOUT_MASK) { - dev_dbg(sdev, "SPI Time-out Error\n"); - return -ETIMEDOUT; - } - if (int_status & SPIFLG_DESYNC_MASK) { - dev_dbg(sdev, "SPI Desynchronization Error\n"); - return -EIO; - } - if (int_status & SPIFLG_BITERR_MASK) { - dev_dbg(sdev, "SPI Bit error\n"); - return -EIO; - } - - if (dspi->version == SPI_VERSION_2) { - if (int_status & SPIFLG_DLEN_ERR_MASK) { - dev_dbg(sdev, "SPI Data Length Error\n"); - return -EIO; - } - if (int_status & SPIFLG_PARERR_MASK) { - dev_dbg(sdev, "SPI Parity Error\n"); - return -EIO; - } - if (int_status & SPIFLG_OVRRUN_MASK) { - dev_dbg(sdev, "SPI Data Overrun error\n"); - return -EIO; - } - if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) { - dev_dbg(sdev, "SPI Buffer Init Active\n"); - return -EBUSY; - } - } - - return 0; -} - -/** - * davinci_spi_process_events - check for and handle any SPI controller events - * @dspi: the controller data - * - * This function will check the SPIFLG register and handle any events that are - * detected there - */ -static int davinci_spi_process_events(struct davinci_spi *dspi) -{ - u32 buf, status, errors = 0, spidat1; - - buf = ioread32(dspi->base + SPIBUF); - - if (dspi->rcount > 0 && !(buf & SPIBUF_RXEMPTY_MASK)) { - dspi->get_rx(buf & 0xFFFF, dspi); - dspi->rcount--; - } - - status = ioread32(dspi->base + SPIFLG); - - if (unlikely(status & SPIFLG_ERROR_MASK)) { - errors = status & SPIFLG_ERROR_MASK; - goto out; - } - - if (dspi->wcount > 0 && !(buf & SPIBUF_TXFULL_MASK)) { - spidat1 = ioread32(dspi->base + SPIDAT1); - dspi->wcount--; - spidat1 &= ~0xFFFF; - spidat1 |= 0xFFFF & dspi->get_tx(dspi); - iowrite32(spidat1, dspi->base + SPIDAT1); - } - -out: - return errors; -} - -static void davinci_spi_dma_callback(unsigned lch, u16 status, void *data) -{ - struct davinci_spi *dspi = data; - struct davinci_spi_dma *dma = &dspi->dma; - - edma_stop(lch); - - if (status == DMA_COMPLETE) { - if (lch == dma->rx_channel) - dspi->rcount = 0; - if (lch == dma->tx_channel) - dspi->wcount = 0; - } - - if ((!dspi->wcount && !dspi->rcount) || (status != DMA_COMPLETE)) - complete(&dspi->done); -} - -/** - * davinci_spi_bufs - functions which will handle transfer data - * @spi: spi device on which data transfer to be done - * @t: spi transfer in which transfer info is filled - * - * This function will put data to be transferred into data register - * of SPI controller and then wait until the completion will be marked - * by the IRQ Handler. - */ -static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) -{ - struct davinci_spi *dspi; - int data_type, ret; - u32 tx_data, spidat1; - u32 errors = 0; - struct davinci_spi_config *spicfg; - struct davinci_spi_platform_data *pdata; - unsigned uninitialized_var(rx_buf_count); - struct device *sdev; - - dspi = spi_master_get_devdata(spi->master); - pdata = dspi->pdata; - spicfg = (struct davinci_spi_config *)spi->controller_data; - if (!spicfg) - spicfg = &davinci_spi_default_cfg; - sdev = dspi->bitbang.master->dev.parent; - - /* convert len to words based on bits_per_word */ - data_type = dspi->bytes_per_word[spi->chip_select]; - - dspi->tx = t->tx_buf; - dspi->rx = t->rx_buf; - dspi->wcount = t->len / data_type; - dspi->rcount = dspi->wcount; - - spidat1 = ioread32(dspi->base + SPIDAT1); - - clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); - set_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); - - INIT_COMPLETION(dspi->done); - - if (spicfg->io_type == SPI_IO_TYPE_INTR) - set_io_bits(dspi->base + SPIINT, SPIINT_MASKINT); - - if (spicfg->io_type != SPI_IO_TYPE_DMA) { - /* start the transfer */ - dspi->wcount--; - tx_data = dspi->get_tx(dspi); - spidat1 &= 0xFFFF0000; - spidat1 |= tx_data & 0xFFFF; - iowrite32(spidat1, dspi->base + SPIDAT1); - } else { - struct davinci_spi_dma *dma; - unsigned long tx_reg, rx_reg; - struct edmacc_param param; - void *rx_buf; - int b, c; - - dma = &dspi->dma; - - tx_reg = (unsigned long)dspi->pbase + SPIDAT1; - rx_reg = (unsigned long)dspi->pbase + SPIBUF; - - /* - * Transmit DMA setup - * - * If there is transmit data, map the transmit buffer, set it - * as the source of data and set the source B index to data - * size. If there is no transmit data, set the transmit register - * as the source of data, and set the source B index to zero. - * - * The destination is always the transmit register itself. And - * the destination never increments. - */ - - if (t->tx_buf) { - t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf, - t->len, DMA_TO_DEVICE); - if (dma_mapping_error(&spi->dev, t->tx_dma)) { - dev_dbg(sdev, "Unable to DMA map %d bytes" - "TX buffer\n", t->len); - return -ENOMEM; - } - } - - /* - * If number of words is greater than 65535, then we need - * to configure a 3 dimension transfer. Use the BCNTRLD - * feature to allow for transfers that aren't even multiples - * of 65535 (or any other possible b size) by first transferring - * the remainder amount then grabbing the next N blocks of - * 65535 words. - */ - - c = dspi->wcount / (SZ_64K - 1); /* N 65535 Blocks */ - b = dspi->wcount - c * (SZ_64K - 1); /* Remainder */ - if (b) - c++; - else - b = SZ_64K - 1; - - param.opt = TCINTEN | EDMA_TCC(dma->tx_channel); - param.src = t->tx_buf ? t->tx_dma : tx_reg; - param.a_b_cnt = b << 16 | data_type; - param.dst = tx_reg; - param.src_dst_bidx = t->tx_buf ? data_type : 0; - param.link_bcntrld = 0xffffffff; - param.src_dst_cidx = t->tx_buf ? data_type : 0; - param.ccnt = c; - edma_write_slot(dma->tx_channel, ¶m); - edma_link(dma->tx_channel, dma->dummy_param_slot); - - /* - * Receive DMA setup - * - * If there is receive buffer, use it to receive data. If there - * is none provided, use a temporary receive buffer. Set the - * destination B index to 0 so effectively only one byte is used - * in the temporary buffer (address does not increment). - * - * The source of receive data is the receive data register. The - * source address never increments. - */ - - if (t->rx_buf) { - rx_buf = t->rx_buf; - rx_buf_count = t->len; - } else { - rx_buf = dspi->rx_tmp_buf; - rx_buf_count = sizeof(dspi->rx_tmp_buf); - } - - t->rx_dma = dma_map_single(&spi->dev, rx_buf, rx_buf_count, - DMA_FROM_DEVICE); - if (dma_mapping_error(&spi->dev, t->rx_dma)) { - dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n", - rx_buf_count); - if (t->tx_buf) - dma_unmap_single(NULL, t->tx_dma, t->len, - DMA_TO_DEVICE); - return -ENOMEM; - } - - param.opt = TCINTEN | EDMA_TCC(dma->rx_channel); - param.src = rx_reg; - param.a_b_cnt = b << 16 | data_type; - param.dst = t->rx_dma; - param.src_dst_bidx = (t->rx_buf ? data_type : 0) << 16; - param.link_bcntrld = 0xffffffff; - param.src_dst_cidx = (t->rx_buf ? data_type : 0) << 16; - param.ccnt = c; - edma_write_slot(dma->rx_channel, ¶m); - - if (pdata->cshold_bug) - iowrite16(spidat1 >> 16, dspi->base + SPIDAT1 + 2); - - edma_start(dma->rx_channel); - edma_start(dma->tx_channel); - set_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN); - } - - /* Wait for the transfer to complete */ - if (spicfg->io_type != SPI_IO_TYPE_POLL) { - wait_for_completion_interruptible(&(dspi->done)); - } else { - while (dspi->rcount > 0 || dspi->wcount > 0) { - errors = davinci_spi_process_events(dspi); - if (errors) - break; - cpu_relax(); - } - } - - clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL); - if (spicfg->io_type == SPI_IO_TYPE_DMA) { - - if (t->tx_buf) - dma_unmap_single(NULL, t->tx_dma, t->len, - DMA_TO_DEVICE); - - dma_unmap_single(NULL, t->rx_dma, rx_buf_count, - DMA_FROM_DEVICE); - - clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN); - } - - clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); - set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); - - /* - * Check for bit error, desync error,parity error,timeout error and - * receive overflow errors - */ - if (errors) { - ret = davinci_spi_check_error(dspi, errors); - WARN(!ret, "%s: error reported but no error found!\n", - dev_name(&spi->dev)); - return ret; - } - - if (dspi->rcount != 0 || dspi->wcount != 0) { - dev_err(sdev, "SPI data transfer error\n"); - return -EIO; - } - - return t->len; -} - -/** - * davinci_spi_irq - Interrupt handler for SPI Master Controller - * @irq: IRQ number for this SPI Master - * @context_data: structure for SPI Master controller davinci_spi - * - * ISR will determine that interrupt arrives either for READ or WRITE command. - * According to command it will do the appropriate action. It will check - * transfer length and if it is not zero then dispatch transfer command again. - * If transfer length is zero then it will indicate the COMPLETION so that - * davinci_spi_bufs function can go ahead. - */ -static irqreturn_t davinci_spi_irq(s32 irq, void *data) -{ - struct davinci_spi *dspi = data; - int status; - - status = davinci_spi_process_events(dspi); - if (unlikely(status != 0)) - clear_io_bits(dspi->base + SPIINT, SPIINT_MASKINT); - - if ((!dspi->rcount && !dspi->wcount) || status) - complete(&dspi->done); - - return IRQ_HANDLED; -} - -static int davinci_spi_request_dma(struct davinci_spi *dspi) -{ - int r; - struct davinci_spi_dma *dma = &dspi->dma; - - r = edma_alloc_channel(dma->rx_channel, davinci_spi_dma_callback, dspi, - dma->eventq); - if (r < 0) { - pr_err("Unable to request DMA channel for SPI RX\n"); - r = -EAGAIN; - goto rx_dma_failed; - } - - r = edma_alloc_channel(dma->tx_channel, davinci_spi_dma_callback, dspi, - dma->eventq); - if (r < 0) { - pr_err("Unable to request DMA channel for SPI TX\n"); - r = -EAGAIN; - goto tx_dma_failed; - } - - r = edma_alloc_slot(EDMA_CTLR(dma->tx_channel), EDMA_SLOT_ANY); - if (r < 0) { - pr_err("Unable to request SPI TX DMA param slot\n"); - r = -EAGAIN; - goto param_failed; - } - dma->dummy_param_slot = r; - edma_link(dma->dummy_param_slot, dma->dummy_param_slot); - - return 0; -param_failed: - edma_free_channel(dma->tx_channel); -tx_dma_failed: - edma_free_channel(dma->rx_channel); -rx_dma_failed: - return r; -} - -/** - * davinci_spi_probe - probe function for SPI Master Controller - * @pdev: platform_device structure which contains plateform specific data - * - * According to Linux Device Model this function will be invoked by Linux - * with platform_device struct which contains the device specific info. - * This function will map the SPI controller's memory, register IRQ, - * Reset SPI controller and setting its registers to default value. - * It will invoke spi_bitbang_start to create work queue so that client driver - * can register transfer method to work queue. - */ -static int davinci_spi_probe(struct platform_device *pdev) -{ - struct spi_master *master; - struct davinci_spi *dspi; - struct davinci_spi_platform_data *pdata; - struct resource *r, *mem; - resource_size_t dma_rx_chan = SPI_NO_RESOURCE; - resource_size_t dma_tx_chan = SPI_NO_RESOURCE; - int i = 0, ret = 0; - u32 spipc0; - - pdata = pdev->dev.platform_data; - if (pdata == NULL) { - ret = -ENODEV; - goto err; - } - - master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi)); - if (master == NULL) { - ret = -ENOMEM; - goto err; - } - - dev_set_drvdata(&pdev->dev, master); - - dspi = spi_master_get_devdata(master); - if (dspi == NULL) { - ret = -ENOENT; - goto free_master; - } - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - ret = -ENOENT; - goto free_master; - } - - dspi->pbase = r->start; - dspi->pdata = pdata; - - mem = request_mem_region(r->start, resource_size(r), pdev->name); - if (mem == NULL) { - ret = -EBUSY; - goto free_master; - } - - dspi->base = ioremap(r->start, resource_size(r)); - if (dspi->base == NULL) { - ret = -ENOMEM; - goto release_region; - } - - dspi->irq = platform_get_irq(pdev, 0); - if (dspi->irq <= 0) { - ret = -EINVAL; - goto unmap_io; - } - - ret = request_irq(dspi->irq, davinci_spi_irq, 0, dev_name(&pdev->dev), - dspi); - if (ret) - goto unmap_io; - - dspi->bitbang.master = spi_master_get(master); - if (dspi->bitbang.master == NULL) { - ret = -ENODEV; - goto irq_free; - } - - dspi->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(dspi->clk)) { - ret = -ENODEV; - goto put_master; - } - clk_enable(dspi->clk); - - master->bus_num = pdev->id; - master->num_chipselect = pdata->num_chipselect; - master->setup = davinci_spi_setup; - - dspi->bitbang.chipselect = davinci_spi_chipselect; - dspi->bitbang.setup_transfer = davinci_spi_setup_transfer; - - dspi->version = pdata->version; - - dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP; - if (dspi->version == SPI_VERSION_2) - dspi->bitbang.flags |= SPI_READY; - - r = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (r) - dma_rx_chan = r->start; - r = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (r) - dma_tx_chan = r->start; - - dspi->bitbang.txrx_bufs = davinci_spi_bufs; - if (dma_rx_chan != SPI_NO_RESOURCE && - dma_tx_chan != SPI_NO_RESOURCE) { - dspi->dma.rx_channel = dma_rx_chan; - dspi->dma.tx_channel = dma_tx_chan; - dspi->dma.eventq = pdata->dma_event_q; - - ret = davinci_spi_request_dma(dspi); - if (ret) - goto free_clk; - - dev_info(&pdev->dev, "DMA: supported\n"); - dev_info(&pdev->dev, "DMA: RX channel: %d, TX channel: %d, " - "event queue: %d\n", dma_rx_chan, dma_tx_chan, - pdata->dma_event_q); - } - - dspi->get_rx = davinci_spi_rx_buf_u8; - dspi->get_tx = davinci_spi_tx_buf_u8; - - init_completion(&dspi->done); - - /* Reset In/OUT SPI module */ - iowrite32(0, dspi->base + SPIGCR0); - udelay(100); - iowrite32(1, dspi->base + SPIGCR0); - - /* Set up SPIPC0. CS and ENA init is done in davinci_spi_setup */ - spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK; - iowrite32(spipc0, dspi->base + SPIPC0); - - /* initialize chip selects */ - if (pdata->chip_sel) { - for (i = 0; i < pdata->num_chipselect; i++) { - if (pdata->chip_sel[i] != SPI_INTERN_CS) - gpio_direction_output(pdata->chip_sel[i], 1); - } - } - - if (pdata->intr_line) - iowrite32(SPI_INTLVL_1, dspi->base + SPILVL); - else - iowrite32(SPI_INTLVL_0, dspi->base + SPILVL); - - iowrite32(CS_DEFAULT, dspi->base + SPIDEF); - - /* master mode default */ - set_io_bits(dspi->base + SPIGCR1, SPIGCR1_CLKMOD_MASK); - set_io_bits(dspi->base + SPIGCR1, SPIGCR1_MASTER_MASK); - set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); - - ret = spi_bitbang_start(&dspi->bitbang); - if (ret) - goto free_dma; - - dev_info(&pdev->dev, "Controller at 0x%p\n", dspi->base); - - return ret; - -free_dma: - edma_free_channel(dspi->dma.tx_channel); - edma_free_channel(dspi->dma.rx_channel); - edma_free_slot(dspi->dma.dummy_param_slot); -free_clk: - clk_disable(dspi->clk); - clk_put(dspi->clk); -put_master: - spi_master_put(master); -irq_free: - free_irq(dspi->irq, dspi); -unmap_io: - iounmap(dspi->base); -release_region: - release_mem_region(dspi->pbase, resource_size(r)); -free_master: - kfree(master); -err: - return ret; -} - -/** - * davinci_spi_remove - remove function for SPI Master Controller - * @pdev: platform_device structure which contains plateform specific data - * - * This function will do the reverse action of davinci_spi_probe function - * It will free the IRQ and SPI controller's memory region. - * It will also call spi_bitbang_stop to destroy the work queue which was - * created by spi_bitbang_start. - */ -static int __exit davinci_spi_remove(struct platform_device *pdev) -{ - struct davinci_spi *dspi; - struct spi_master *master; - struct resource *r; - - master = dev_get_drvdata(&pdev->dev); - dspi = spi_master_get_devdata(master); - - spi_bitbang_stop(&dspi->bitbang); - - clk_disable(dspi->clk); - clk_put(dspi->clk); - spi_master_put(master); - free_irq(dspi->irq, dspi); - iounmap(dspi->base); - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(dspi->pbase, resource_size(r)); - - return 0; -} - -static struct platform_driver davinci_spi_driver = { - .driver = { - .name = "spi_davinci", - .owner = THIS_MODULE, - }, - .remove = __exit_p(davinci_spi_remove), -}; - -static int __init davinci_spi_init(void) -{ - return platform_driver_probe(&davinci_spi_driver, davinci_spi_probe); -} -module_init(davinci_spi_init); - -static void __exit davinci_spi_exit(void) -{ - platform_driver_unregister(&davinci_spi_driver); -} -module_exit(davinci_spi_exit); - -MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c deleted file mode 100644 index 919fa9d9e16b..000000000000 --- a/drivers/spi/dw_spi.c +++ /dev/null @@ -1,936 +0,0 @@ -/* - * dw_spi.c - Designware SPI core controller driver (refer pxa2xx_spi.c) - * - * Copyright (c) 2009, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include -#include - -#include "dw_spi.h" - -#ifdef CONFIG_DEBUG_FS -#include -#endif - -#define START_STATE ((void *)0) -#define RUNNING_STATE ((void *)1) -#define DONE_STATE ((void *)2) -#define ERROR_STATE ((void *)-1) - -#define QUEUE_RUNNING 0 -#define QUEUE_STOPPED 1 - -#define MRST_SPI_DEASSERT 0 -#define MRST_SPI_ASSERT 1 - -/* Slave spi_dev related */ -struct chip_data { - u16 cr0; - u8 cs; /* chip select pin */ - u8 n_bytes; /* current is a 1/2/4 byte op */ - u8 tmode; /* TR/TO/RO/EEPROM */ - u8 type; /* SPI/SSP/MicroWire */ - - u8 poll_mode; /* 1 means use poll mode */ - - u32 dma_width; - u32 rx_threshold; - u32 tx_threshold; - u8 enable_dma; - u8 bits_per_word; - u16 clk_div; /* baud rate divider */ - u32 speed_hz; /* baud rate */ - void (*cs_control)(u32 command); -}; - -#ifdef CONFIG_DEBUG_FS -static int spi_show_regs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -#define SPI_REGS_BUFSIZE 1024 -static ssize_t spi_show_regs(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct dw_spi *dws; - char *buf; - u32 len = 0; - ssize_t ret; - - dws = file->private_data; - - buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL); - if (!buf) - return 0; - - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "MRST SPI0 registers:\n"); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "=================================\n"); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "CTRL0: \t\t0x%08x\n", dw_readl(dws, ctrl0)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "CTRL1: \t\t0x%08x\n", dw_readl(dws, ctrl1)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "SSIENR: \t0x%08x\n", dw_readl(dws, ssienr)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "SER: \t\t0x%08x\n", dw_readl(dws, ser)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "BAUDR: \t\t0x%08x\n", dw_readl(dws, baudr)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "TXFTLR: \t0x%08x\n", dw_readl(dws, txfltr)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "RXFTLR: \t0x%08x\n", dw_readl(dws, rxfltr)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "TXFLR: \t\t0x%08x\n", dw_readl(dws, txflr)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "RXFLR: \t\t0x%08x\n", dw_readl(dws, rxflr)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "SR: \t\t0x%08x\n", dw_readl(dws, sr)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "IMR: \t\t0x%08x\n", dw_readl(dws, imr)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "ISR: \t\t0x%08x\n", dw_readl(dws, isr)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "DMACR: \t\t0x%08x\n", dw_readl(dws, dmacr)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "DMATDLR: \t0x%08x\n", dw_readl(dws, dmatdlr)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "DMARDLR: \t0x%08x\n", dw_readl(dws, dmardlr)); - len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "=================================\n"); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); - kfree(buf); - return ret; -} - -static const struct file_operations mrst_spi_regs_ops = { - .owner = THIS_MODULE, - .open = spi_show_regs_open, - .read = spi_show_regs, - .llseek = default_llseek, -}; - -static int mrst_spi_debugfs_init(struct dw_spi *dws) -{ - dws->debugfs = debugfs_create_dir("mrst_spi", NULL); - if (!dws->debugfs) - return -ENOMEM; - - debugfs_create_file("registers", S_IFREG | S_IRUGO, - dws->debugfs, (void *)dws, &mrst_spi_regs_ops); - return 0; -} - -static void mrst_spi_debugfs_remove(struct dw_spi *dws) -{ - if (dws->debugfs) - debugfs_remove_recursive(dws->debugfs); -} - -#else -static inline int mrst_spi_debugfs_init(struct dw_spi *dws) -{ - return 0; -} - -static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) -{ -} -#endif /* CONFIG_DEBUG_FS */ - -/* Return the max entries we can fill into tx fifo */ -static inline u32 tx_max(struct dw_spi *dws) -{ - u32 tx_left, tx_room, rxtx_gap; - - tx_left = (dws->tx_end - dws->tx) / dws->n_bytes; - tx_room = dws->fifo_len - dw_readw(dws, txflr); - - /* - * Another concern is about the tx/rx mismatch, we - * though to use (dws->fifo_len - rxflr - txflr) as - * one maximum value for tx, but it doesn't cover the - * data which is out of tx/rx fifo and inside the - * shift registers. So a control from sw point of - * view is taken. - */ - rxtx_gap = ((dws->rx_end - dws->rx) - (dws->tx_end - dws->tx)) - / dws->n_bytes; - - return min3(tx_left, tx_room, (u32) (dws->fifo_len - rxtx_gap)); -} - -/* Return the max entries we should read out of rx fifo */ -static inline u32 rx_max(struct dw_spi *dws) -{ - u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes; - - return min(rx_left, (u32)dw_readw(dws, rxflr)); -} - -static void dw_writer(struct dw_spi *dws) -{ - u32 max = tx_max(dws); - u16 txw = 0; - - while (max--) { - /* Set the tx word if the transfer's original "tx" is not null */ - if (dws->tx_end - dws->len) { - if (dws->n_bytes == 1) - txw = *(u8 *)(dws->tx); - else - txw = *(u16 *)(dws->tx); - } - dw_writew(dws, dr, txw); - dws->tx += dws->n_bytes; - } -} - -static void dw_reader(struct dw_spi *dws) -{ - u32 max = rx_max(dws); - u16 rxw; - - while (max--) { - rxw = dw_readw(dws, dr); - /* Care rx only if the transfer's original "rx" is not null */ - if (dws->rx_end - dws->len) { - if (dws->n_bytes == 1) - *(u8 *)(dws->rx) = rxw; - else - *(u16 *)(dws->rx) = rxw; - } - dws->rx += dws->n_bytes; - } -} - -static void *next_transfer(struct dw_spi *dws) -{ - struct spi_message *msg = dws->cur_msg; - struct spi_transfer *trans = dws->cur_transfer; - - /* Move to next transfer */ - if (trans->transfer_list.next != &msg->transfers) { - dws->cur_transfer = - list_entry(trans->transfer_list.next, - struct spi_transfer, - transfer_list); - return RUNNING_STATE; - } else - return DONE_STATE; -} - -/* - * Note: first step is the protocol driver prepares - * a dma-capable memory, and this func just need translate - * the virt addr to physical - */ -static int map_dma_buffers(struct dw_spi *dws) -{ - if (!dws->cur_msg->is_dma_mapped - || !dws->dma_inited - || !dws->cur_chip->enable_dma - || !dws->dma_ops) - return 0; - - if (dws->cur_transfer->tx_dma) - dws->tx_dma = dws->cur_transfer->tx_dma; - - if (dws->cur_transfer->rx_dma) - dws->rx_dma = dws->cur_transfer->rx_dma; - - return 1; -} - -/* Caller already set message->status; dma and pio irqs are blocked */ -static void giveback(struct dw_spi *dws) -{ - struct spi_transfer *last_transfer; - unsigned long flags; - struct spi_message *msg; - - spin_lock_irqsave(&dws->lock, flags); - msg = dws->cur_msg; - dws->cur_msg = NULL; - dws->cur_transfer = NULL; - dws->prev_chip = dws->cur_chip; - dws->cur_chip = NULL; - dws->dma_mapped = 0; - queue_work(dws->workqueue, &dws->pump_messages); - spin_unlock_irqrestore(&dws->lock, flags); - - last_transfer = list_entry(msg->transfers.prev, - struct spi_transfer, - transfer_list); - - if (!last_transfer->cs_change && dws->cs_control) - dws->cs_control(MRST_SPI_DEASSERT); - - msg->state = NULL; - if (msg->complete) - msg->complete(msg->context); -} - -static void int_error_stop(struct dw_spi *dws, const char *msg) -{ - /* Stop the hw */ - spi_enable_chip(dws, 0); - - dev_err(&dws->master->dev, "%s\n", msg); - dws->cur_msg->state = ERROR_STATE; - tasklet_schedule(&dws->pump_transfers); -} - -void dw_spi_xfer_done(struct dw_spi *dws) -{ - /* Update total byte transferred return count actual bytes read */ - dws->cur_msg->actual_length += dws->len; - - /* Move to next transfer */ - dws->cur_msg->state = next_transfer(dws); - - /* Handle end of message */ - if (dws->cur_msg->state == DONE_STATE) { - dws->cur_msg->status = 0; - giveback(dws); - } else - tasklet_schedule(&dws->pump_transfers); -} -EXPORT_SYMBOL_GPL(dw_spi_xfer_done); - -static irqreturn_t interrupt_transfer(struct dw_spi *dws) -{ - u16 irq_status = dw_readw(dws, isr); - - /* Error handling */ - if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) { - dw_readw(dws, txoicr); - dw_readw(dws, rxoicr); - dw_readw(dws, rxuicr); - int_error_stop(dws, "interrupt_transfer: fifo overrun/underrun"); - return IRQ_HANDLED; - } - - dw_reader(dws); - if (dws->rx_end == dws->rx) { - spi_mask_intr(dws, SPI_INT_TXEI); - dw_spi_xfer_done(dws); - return IRQ_HANDLED; - } - if (irq_status & SPI_INT_TXEI) { - spi_mask_intr(dws, SPI_INT_TXEI); - dw_writer(dws); - /* Enable TX irq always, it will be disabled when RX finished */ - spi_umask_intr(dws, SPI_INT_TXEI); - } - - return IRQ_HANDLED; -} - -static irqreturn_t dw_spi_irq(int irq, void *dev_id) -{ - struct dw_spi *dws = dev_id; - u16 irq_status = dw_readw(dws, isr) & 0x3f; - - if (!irq_status) - return IRQ_NONE; - - if (!dws->cur_msg) { - spi_mask_intr(dws, SPI_INT_TXEI); - return IRQ_HANDLED; - } - - return dws->transfer_handler(dws); -} - -/* Must be called inside pump_transfers() */ -static void poll_transfer(struct dw_spi *dws) -{ - do { - dw_writer(dws); - dw_reader(dws); - cpu_relax(); - } while (dws->rx_end > dws->rx); - - dw_spi_xfer_done(dws); -} - -static void pump_transfers(unsigned long data) -{ - struct dw_spi *dws = (struct dw_spi *)data; - struct spi_message *message = NULL; - struct spi_transfer *transfer = NULL; - struct spi_transfer *previous = NULL; - struct spi_device *spi = NULL; - struct chip_data *chip = NULL; - u8 bits = 0; - u8 imask = 0; - u8 cs_change = 0; - u16 txint_level = 0; - u16 clk_div = 0; - u32 speed = 0; - u32 cr0 = 0; - - /* Get current state information */ - message = dws->cur_msg; - transfer = dws->cur_transfer; - chip = dws->cur_chip; - spi = message->spi; - - if (unlikely(!chip->clk_div)) - chip->clk_div = dws->max_freq / chip->speed_hz; - - if (message->state == ERROR_STATE) { - message->status = -EIO; - goto early_exit; - } - - /* Handle end of message */ - if (message->state == DONE_STATE) { - message->status = 0; - goto early_exit; - } - - /* Delay if requested at end of transfer*/ - if (message->state == RUNNING_STATE) { - previous = list_entry(transfer->transfer_list.prev, - struct spi_transfer, - transfer_list); - if (previous->delay_usecs) - udelay(previous->delay_usecs); - } - - dws->n_bytes = chip->n_bytes; - dws->dma_width = chip->dma_width; - dws->cs_control = chip->cs_control; - - dws->rx_dma = transfer->rx_dma; - dws->tx_dma = transfer->tx_dma; - dws->tx = (void *)transfer->tx_buf; - dws->tx_end = dws->tx + transfer->len; - dws->rx = transfer->rx_buf; - dws->rx_end = dws->rx + transfer->len; - dws->cs_change = transfer->cs_change; - dws->len = dws->cur_transfer->len; - if (chip != dws->prev_chip) - cs_change = 1; - - cr0 = chip->cr0; - - /* Handle per transfer options for bpw and speed */ - if (transfer->speed_hz) { - speed = chip->speed_hz; - - if (transfer->speed_hz != speed) { - speed = transfer->speed_hz; - if (speed > dws->max_freq) { - printk(KERN_ERR "MRST SPI0: unsupported" - "freq: %dHz\n", speed); - message->status = -EIO; - goto early_exit; - } - - /* clk_div doesn't support odd number */ - clk_div = dws->max_freq / speed; - clk_div = (clk_div + 1) & 0xfffe; - - chip->speed_hz = speed; - chip->clk_div = clk_div; - } - } - if (transfer->bits_per_word) { - bits = transfer->bits_per_word; - - switch (bits) { - case 8: - case 16: - dws->n_bytes = dws->dma_width = bits >> 3; - break; - default: - printk(KERN_ERR "MRST SPI0: unsupported bits:" - "%db\n", bits); - message->status = -EIO; - goto early_exit; - } - - cr0 = (bits - 1) - | (chip->type << SPI_FRF_OFFSET) - | (spi->mode << SPI_MODE_OFFSET) - | (chip->tmode << SPI_TMOD_OFFSET); - } - message->state = RUNNING_STATE; - - /* - * Adjust transfer mode if necessary. Requires platform dependent - * chipselect mechanism. - */ - if (dws->cs_control) { - if (dws->rx && dws->tx) - chip->tmode = SPI_TMOD_TR; - else if (dws->rx) - chip->tmode = SPI_TMOD_RO; - else - chip->tmode = SPI_TMOD_TO; - - cr0 &= ~SPI_TMOD_MASK; - cr0 |= (chip->tmode << SPI_TMOD_OFFSET); - } - - /* Check if current transfer is a DMA transaction */ - dws->dma_mapped = map_dma_buffers(dws); - - /* - * Interrupt mode - * we only need set the TXEI IRQ, as TX/RX always happen syncronizely - */ - if (!dws->dma_mapped && !chip->poll_mode) { - int templen = dws->len / dws->n_bytes; - txint_level = dws->fifo_len / 2; - txint_level = (templen > txint_level) ? txint_level : templen; - - imask |= SPI_INT_TXEI | SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI; - dws->transfer_handler = interrupt_transfer; - } - - /* - * Reprogram registers only if - * 1. chip select changes - * 2. clk_div is changed - * 3. control value changes - */ - if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div || imask) { - spi_enable_chip(dws, 0); - - if (dw_readw(dws, ctrl0) != cr0) - dw_writew(dws, ctrl0, cr0); - - spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); - spi_chip_sel(dws, spi->chip_select); - - /* Set the interrupt mask, for poll mode just disable all int */ - spi_mask_intr(dws, 0xff); - if (imask) - spi_umask_intr(dws, imask); - if (txint_level) - dw_writew(dws, txfltr, txint_level); - - spi_enable_chip(dws, 1); - if (cs_change) - dws->prev_chip = chip; - } - - if (dws->dma_mapped) - dws->dma_ops->dma_transfer(dws, cs_change); - - if (chip->poll_mode) - poll_transfer(dws); - - return; - -early_exit: - giveback(dws); - return; -} - -static void pump_messages(struct work_struct *work) -{ - struct dw_spi *dws = - container_of(work, struct dw_spi, pump_messages); - unsigned long flags; - - /* Lock queue and check for queue work */ - spin_lock_irqsave(&dws->lock, flags); - if (list_empty(&dws->queue) || dws->run == QUEUE_STOPPED) { - dws->busy = 0; - spin_unlock_irqrestore(&dws->lock, flags); - return; - } - - /* Make sure we are not already running a message */ - if (dws->cur_msg) { - spin_unlock_irqrestore(&dws->lock, flags); - return; - } - - /* Extract head of queue */ - dws->cur_msg = list_entry(dws->queue.next, struct spi_message, queue); - list_del_init(&dws->cur_msg->queue); - - /* Initial message state*/ - dws->cur_msg->state = START_STATE; - dws->cur_transfer = list_entry(dws->cur_msg->transfers.next, - struct spi_transfer, - transfer_list); - dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi); - - /* Mark as busy and launch transfers */ - tasklet_schedule(&dws->pump_transfers); - - dws->busy = 1; - spin_unlock_irqrestore(&dws->lock, flags); -} - -/* spi_device use this to queue in their spi_msg */ -static int dw_spi_transfer(struct spi_device *spi, struct spi_message *msg) -{ - struct dw_spi *dws = spi_master_get_devdata(spi->master); - unsigned long flags; - - spin_lock_irqsave(&dws->lock, flags); - - if (dws->run == QUEUE_STOPPED) { - spin_unlock_irqrestore(&dws->lock, flags); - return -ESHUTDOWN; - } - - msg->actual_length = 0; - msg->status = -EINPROGRESS; - msg->state = START_STATE; - - list_add_tail(&msg->queue, &dws->queue); - - if (dws->run == QUEUE_RUNNING && !dws->busy) { - - if (dws->cur_transfer || dws->cur_msg) - queue_work(dws->workqueue, - &dws->pump_messages); - else { - /* If no other data transaction in air, just go */ - spin_unlock_irqrestore(&dws->lock, flags); - pump_messages(&dws->pump_messages); - return 0; - } - } - - spin_unlock_irqrestore(&dws->lock, flags); - return 0; -} - -/* This may be called twice for each spi dev */ -static int dw_spi_setup(struct spi_device *spi) -{ - struct dw_spi_chip *chip_info = NULL; - struct chip_data *chip; - - if (spi->bits_per_word != 8 && spi->bits_per_word != 16) - return -EINVAL; - - /* Only alloc on first setup */ - chip = spi_get_ctldata(spi); - if (!chip) { - chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); - if (!chip) - return -ENOMEM; - } - - /* - * Protocol drivers may change the chip settings, so... - * if chip_info exists, use it - */ - chip_info = spi->controller_data; - - /* chip_info doesn't always exist */ - if (chip_info) { - if (chip_info->cs_control) - chip->cs_control = chip_info->cs_control; - - chip->poll_mode = chip_info->poll_mode; - chip->type = chip_info->type; - - chip->rx_threshold = 0; - chip->tx_threshold = 0; - - chip->enable_dma = chip_info->enable_dma; - } - - if (spi->bits_per_word <= 8) { - chip->n_bytes = 1; - chip->dma_width = 1; - } else if (spi->bits_per_word <= 16) { - chip->n_bytes = 2; - chip->dma_width = 2; - } else { - /* Never take >16b case for MRST SPIC */ - dev_err(&spi->dev, "invalid wordsize\n"); - return -EINVAL; - } - chip->bits_per_word = spi->bits_per_word; - - if (!spi->max_speed_hz) { - dev_err(&spi->dev, "No max speed HZ parameter\n"); - return -EINVAL; - } - chip->speed_hz = spi->max_speed_hz; - - chip->tmode = 0; /* Tx & Rx */ - /* Default SPI mode is SCPOL = 0, SCPH = 0 */ - chip->cr0 = (chip->bits_per_word - 1) - | (chip->type << SPI_FRF_OFFSET) - | (spi->mode << SPI_MODE_OFFSET) - | (chip->tmode << SPI_TMOD_OFFSET); - - spi_set_ctldata(spi, chip); - return 0; -} - -static void dw_spi_cleanup(struct spi_device *spi) -{ - struct chip_data *chip = spi_get_ctldata(spi); - kfree(chip); -} - -static int __devinit init_queue(struct dw_spi *dws) -{ - INIT_LIST_HEAD(&dws->queue); - spin_lock_init(&dws->lock); - - dws->run = QUEUE_STOPPED; - dws->busy = 0; - - tasklet_init(&dws->pump_transfers, - pump_transfers, (unsigned long)dws); - - INIT_WORK(&dws->pump_messages, pump_messages); - dws->workqueue = create_singlethread_workqueue( - dev_name(dws->master->dev.parent)); - if (dws->workqueue == NULL) - return -EBUSY; - - return 0; -} - -static int start_queue(struct dw_spi *dws) -{ - unsigned long flags; - - spin_lock_irqsave(&dws->lock, flags); - - if (dws->run == QUEUE_RUNNING || dws->busy) { - spin_unlock_irqrestore(&dws->lock, flags); - return -EBUSY; - } - - dws->run = QUEUE_RUNNING; - dws->cur_msg = NULL; - dws->cur_transfer = NULL; - dws->cur_chip = NULL; - dws->prev_chip = NULL; - spin_unlock_irqrestore(&dws->lock, flags); - - queue_work(dws->workqueue, &dws->pump_messages); - - return 0; -} - -static int stop_queue(struct dw_spi *dws) -{ - unsigned long flags; - unsigned limit = 50; - int status = 0; - - spin_lock_irqsave(&dws->lock, flags); - dws->run = QUEUE_STOPPED; - while ((!list_empty(&dws->queue) || dws->busy) && limit--) { - spin_unlock_irqrestore(&dws->lock, flags); - msleep(10); - spin_lock_irqsave(&dws->lock, flags); - } - - if (!list_empty(&dws->queue) || dws->busy) - status = -EBUSY; - spin_unlock_irqrestore(&dws->lock, flags); - - return status; -} - -static int destroy_queue(struct dw_spi *dws) -{ - int status; - - status = stop_queue(dws); - if (status != 0) - return status; - destroy_workqueue(dws->workqueue); - return 0; -} - -/* Restart the controller, disable all interrupts, clean rx fifo */ -static void spi_hw_init(struct dw_spi *dws) -{ - spi_enable_chip(dws, 0); - spi_mask_intr(dws, 0xff); - spi_enable_chip(dws, 1); - - /* - * Try to detect the FIFO depth if not set by interface driver, - * the depth could be from 2 to 256 from HW spec - */ - if (!dws->fifo_len) { - u32 fifo; - for (fifo = 2; fifo <= 257; fifo++) { - dw_writew(dws, txfltr, fifo); - if (fifo != dw_readw(dws, txfltr)) - break; - } - - dws->fifo_len = (fifo == 257) ? 0 : fifo; - dw_writew(dws, txfltr, 0); - } -} - -int __devinit dw_spi_add_host(struct dw_spi *dws) -{ - struct spi_master *master; - int ret; - - BUG_ON(dws == NULL); - - master = spi_alloc_master(dws->parent_dev, 0); - if (!master) { - ret = -ENOMEM; - goto exit; - } - - dws->master = master; - dws->type = SSI_MOTO_SPI; - dws->prev_chip = NULL; - dws->dma_inited = 0; - dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60); - - ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, - "dw_spi", dws); - if (ret < 0) { - dev_err(&master->dev, "can not get IRQ\n"); - goto err_free_master; - } - - master->mode_bits = SPI_CPOL | SPI_CPHA; - master->bus_num = dws->bus_num; - master->num_chipselect = dws->num_cs; - master->cleanup = dw_spi_cleanup; - master->setup = dw_spi_setup; - master->transfer = dw_spi_transfer; - - /* Basic HW init */ - spi_hw_init(dws); - - if (dws->dma_ops && dws->dma_ops->dma_init) { - ret = dws->dma_ops->dma_init(dws); - if (ret) { - dev_warn(&master->dev, "DMA init failed\n"); - dws->dma_inited = 0; - } - } - - /* Initial and start queue */ - ret = init_queue(dws); - if (ret) { - dev_err(&master->dev, "problem initializing queue\n"); - goto err_diable_hw; - } - ret = start_queue(dws); - if (ret) { - dev_err(&master->dev, "problem starting queue\n"); - goto err_diable_hw; - } - - spi_master_set_devdata(master, dws); - ret = spi_register_master(master); - if (ret) { - dev_err(&master->dev, "problem registering spi master\n"); - goto err_queue_alloc; - } - - mrst_spi_debugfs_init(dws); - return 0; - -err_queue_alloc: - destroy_queue(dws); - if (dws->dma_ops && dws->dma_ops->dma_exit) - dws->dma_ops->dma_exit(dws); -err_diable_hw: - spi_enable_chip(dws, 0); - free_irq(dws->irq, dws); -err_free_master: - spi_master_put(master); -exit: - return ret; -} -EXPORT_SYMBOL_GPL(dw_spi_add_host); - -void __devexit dw_spi_remove_host(struct dw_spi *dws) -{ - int status = 0; - - if (!dws) - return; - mrst_spi_debugfs_remove(dws); - - /* Remove the queue */ - status = destroy_queue(dws); - if (status != 0) - dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not " - "complete, message memory not freed\n"); - - if (dws->dma_ops && dws->dma_ops->dma_exit) - dws->dma_ops->dma_exit(dws); - spi_enable_chip(dws, 0); - /* Disable clk */ - spi_set_clk(dws, 0); - free_irq(dws->irq, dws); - - /* Disconnect from the SPI framework */ - spi_unregister_master(dws->master); -} -EXPORT_SYMBOL_GPL(dw_spi_remove_host); - -int dw_spi_suspend_host(struct dw_spi *dws) -{ - int ret = 0; - - ret = stop_queue(dws); - if (ret) - return ret; - spi_enable_chip(dws, 0); - spi_set_clk(dws, 0); - return ret; -} -EXPORT_SYMBOL_GPL(dw_spi_suspend_host); - -int dw_spi_resume_host(struct dw_spi *dws) -{ - int ret; - - spi_hw_init(dws); - ret = start_queue(dws); - if (ret) - dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret); - return ret; -} -EXPORT_SYMBOL_GPL(dw_spi_resume_host); - -MODULE_AUTHOR("Feng Tang "); -MODULE_DESCRIPTION("Driver for DesignWare SPI controller core"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/dw_spi.h b/drivers/spi/dw_spi.h deleted file mode 100644 index 7a5e78d2a5cb..000000000000 --- a/drivers/spi/dw_spi.h +++ /dev/null @@ -1,232 +0,0 @@ -#ifndef DW_SPI_HEADER_H -#define DW_SPI_HEADER_H - -#include -#include - -/* Bit fields in CTRLR0 */ -#define SPI_DFS_OFFSET 0 - -#define SPI_FRF_OFFSET 4 -#define SPI_FRF_SPI 0x0 -#define SPI_FRF_SSP 0x1 -#define SPI_FRF_MICROWIRE 0x2 -#define SPI_FRF_RESV 0x3 - -#define SPI_MODE_OFFSET 6 -#define SPI_SCPH_OFFSET 6 -#define SPI_SCOL_OFFSET 7 - -#define SPI_TMOD_OFFSET 8 -#define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET) -#define SPI_TMOD_TR 0x0 /* xmit & recv */ -#define SPI_TMOD_TO 0x1 /* xmit only */ -#define SPI_TMOD_RO 0x2 /* recv only */ -#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */ - -#define SPI_SLVOE_OFFSET 10 -#define SPI_SRL_OFFSET 11 -#define SPI_CFS_OFFSET 12 - -/* Bit fields in SR, 7 bits */ -#define SR_MASK 0x7f /* cover 7 bits */ -#define SR_BUSY (1 << 0) -#define SR_TF_NOT_FULL (1 << 1) -#define SR_TF_EMPT (1 << 2) -#define SR_RF_NOT_EMPT (1 << 3) -#define SR_RF_FULL (1 << 4) -#define SR_TX_ERR (1 << 5) -#define SR_DCOL (1 << 6) - -/* Bit fields in ISR, IMR, RISR, 7 bits */ -#define SPI_INT_TXEI (1 << 0) -#define SPI_INT_TXOI (1 << 1) -#define SPI_INT_RXUI (1 << 2) -#define SPI_INT_RXOI (1 << 3) -#define SPI_INT_RXFI (1 << 4) -#define SPI_INT_MSTI (1 << 5) - -/* TX RX interrupt level threshold, max can be 256 */ -#define SPI_INT_THRESHOLD 32 - -enum dw_ssi_type { - SSI_MOTO_SPI = 0, - SSI_TI_SSP, - SSI_NS_MICROWIRE, -}; - -struct dw_spi_reg { - u32 ctrl0; - u32 ctrl1; - u32 ssienr; - u32 mwcr; - u32 ser; - u32 baudr; - u32 txfltr; - u32 rxfltr; - u32 txflr; - u32 rxflr; - u32 sr; - u32 imr; - u32 isr; - u32 risr; - u32 txoicr; - u32 rxoicr; - u32 rxuicr; - u32 msticr; - u32 icr; - u32 dmacr; - u32 dmatdlr; - u32 dmardlr; - u32 idr; - u32 version; - u32 dr; /* Currently oper as 32 bits, - though only low 16 bits matters */ -} __packed; - -struct dw_spi; -struct dw_spi_dma_ops { - int (*dma_init)(struct dw_spi *dws); - void (*dma_exit)(struct dw_spi *dws); - int (*dma_transfer)(struct dw_spi *dws, int cs_change); -}; - -struct dw_spi { - struct spi_master *master; - struct spi_device *cur_dev; - struct device *parent_dev; - enum dw_ssi_type type; - - void __iomem *regs; - unsigned long paddr; - u32 iolen; - int irq; - u32 fifo_len; /* depth of the FIFO buffer */ - u32 max_freq; /* max bus freq supported */ - - u16 bus_num; - u16 num_cs; /* supported slave numbers */ - - /* Driver message queue */ - struct workqueue_struct *workqueue; - struct work_struct pump_messages; - spinlock_t lock; - struct list_head queue; - int busy; - int run; - - /* Message Transfer pump */ - struct tasklet_struct pump_transfers; - - /* Current message transfer state info */ - struct spi_message *cur_msg; - struct spi_transfer *cur_transfer; - struct chip_data *cur_chip; - struct chip_data *prev_chip; - size_t len; - void *tx; - void *tx_end; - void *rx; - void *rx_end; - int dma_mapped; - dma_addr_t rx_dma; - dma_addr_t tx_dma; - size_t rx_map_len; - size_t tx_map_len; - u8 n_bytes; /* current is a 1/2 bytes op */ - u8 max_bits_per_word; /* maxim is 16b */ - u32 dma_width; - int cs_change; - irqreturn_t (*transfer_handler)(struct dw_spi *dws); - void (*cs_control)(u32 command); - - /* Dma info */ - int dma_inited; - struct dma_chan *txchan; - struct scatterlist tx_sgl; - struct dma_chan *rxchan; - struct scatterlist rx_sgl; - int dma_chan_done; - struct device *dma_dev; - dma_addr_t dma_addr; /* phy address of the Data register */ - struct dw_spi_dma_ops *dma_ops; - void *dma_priv; /* platform relate info */ - struct pci_dev *dmac; - - /* Bus interface info */ - void *priv; -#ifdef CONFIG_DEBUG_FS - struct dentry *debugfs; -#endif -}; - -#define dw_readl(dw, name) \ - __raw_readl(&(((struct dw_spi_reg *)dw->regs)->name)) -#define dw_writel(dw, name, val) \ - __raw_writel((val), &(((struct dw_spi_reg *)dw->regs)->name)) -#define dw_readw(dw, name) \ - __raw_readw(&(((struct dw_spi_reg *)dw->regs)->name)) -#define dw_writew(dw, name, val) \ - __raw_writew((val), &(((struct dw_spi_reg *)dw->regs)->name)) - -static inline void spi_enable_chip(struct dw_spi *dws, int enable) -{ - dw_writel(dws, ssienr, (enable ? 1 : 0)); -} - -static inline void spi_set_clk(struct dw_spi *dws, u16 div) -{ - dw_writel(dws, baudr, div); -} - -static inline void spi_chip_sel(struct dw_spi *dws, u16 cs) -{ - if (cs > dws->num_cs) - return; - - if (dws->cs_control) - dws->cs_control(1); - - dw_writel(dws, ser, 1 << cs); -} - -/* Disable IRQ bits */ -static inline void spi_mask_intr(struct dw_spi *dws, u32 mask) -{ - u32 new_mask; - - new_mask = dw_readl(dws, imr) & ~mask; - dw_writel(dws, imr, new_mask); -} - -/* Enable IRQ bits */ -static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) -{ - u32 new_mask; - - new_mask = dw_readl(dws, imr) | mask; - dw_writel(dws, imr, new_mask); -} - -/* - * Each SPI slave device to work with dw_api controller should - * has such a structure claiming its working mode (PIO/DMA etc), - * which can be save in the "controller_data" member of the - * struct spi_device - */ -struct dw_spi_chip { - u8 poll_mode; /* 0 for contoller polling mode */ - u8 type; /* SPI/SSP/Micrwire */ - u8 enable_dma; - void (*cs_control)(u32 command); -}; - -extern int dw_spi_add_host(struct dw_spi *dws); -extern void dw_spi_remove_host(struct dw_spi *dws); -extern int dw_spi_suspend_host(struct dw_spi *dws); -extern int dw_spi_resume_host(struct dw_spi *dws); -extern void dw_spi_xfer_done(struct dw_spi *dws); - -/* platform related setup */ -extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */ -#endif /* DW_SPI_HEADER_H */ diff --git a/drivers/spi/dw_spi_mid.c b/drivers/spi/dw_spi_mid.c deleted file mode 100644 index 489178243d88..000000000000 --- a/drivers/spi/dw_spi_mid.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * dw_spi_mid.c - special handling for DW core on Intel MID platform - * - * Copyright (c) 2009, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, - * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include - -#include "dw_spi.h" - -#ifdef CONFIG_SPI_DW_MID_DMA -#include -#include - -struct mid_dma { - struct intel_mid_dma_slave dmas_tx; - struct intel_mid_dma_slave dmas_rx; -}; - -static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param) -{ - struct dw_spi *dws = param; - - return dws->dmac && (&dws->dmac->dev == chan->device->dev); -} - -static int mid_spi_dma_init(struct dw_spi *dws) -{ - struct mid_dma *dw_dma = dws->dma_priv; - struct intel_mid_dma_slave *rxs, *txs; - dma_cap_mask_t mask; - - /* - * Get pci device for DMA controller, currently it could only - * be the DMA controller of either Moorestown or Medfield - */ - dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0813, NULL); - if (!dws->dmac) - dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL); - - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - /* 1. Init rx channel */ - dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws); - if (!dws->rxchan) - goto err_exit; - rxs = &dw_dma->dmas_rx; - rxs->hs_mode = LNW_DMA_HW_HS; - rxs->cfg_mode = LNW_DMA_PER_TO_MEM; - dws->rxchan->private = rxs; - - /* 2. Init tx channel */ - dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws); - if (!dws->txchan) - goto free_rxchan; - txs = &dw_dma->dmas_tx; - txs->hs_mode = LNW_DMA_HW_HS; - txs->cfg_mode = LNW_DMA_MEM_TO_PER; - dws->txchan->private = txs; - - dws->dma_inited = 1; - return 0; - -free_rxchan: - dma_release_channel(dws->rxchan); -err_exit: - return -1; - -} - -static void mid_spi_dma_exit(struct dw_spi *dws) -{ - dma_release_channel(dws->txchan); - dma_release_channel(dws->rxchan); -} - -/* - * dws->dma_chan_done is cleared before the dma transfer starts, - * callback for rx/tx channel will each increment it by 1. - * Reaching 2 means the whole spi transaction is done. - */ -static void dw_spi_dma_done(void *arg) -{ - struct dw_spi *dws = arg; - - if (++dws->dma_chan_done != 2) - return; - dw_spi_xfer_done(dws); -} - -static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) -{ - struct dma_async_tx_descriptor *txdesc = NULL, *rxdesc = NULL; - struct dma_chan *txchan, *rxchan; - struct dma_slave_config txconf, rxconf; - u16 dma_ctrl = 0; - - /* 1. setup DMA related registers */ - if (cs_change) { - spi_enable_chip(dws, 0); - dw_writew(dws, dmardlr, 0xf); - dw_writew(dws, dmatdlr, 0x10); - if (dws->tx_dma) - dma_ctrl |= 0x2; - if (dws->rx_dma) - dma_ctrl |= 0x1; - dw_writew(dws, dmacr, dma_ctrl); - spi_enable_chip(dws, 1); - } - - dws->dma_chan_done = 0; - txchan = dws->txchan; - rxchan = dws->rxchan; - - /* 2. Prepare the TX dma transfer */ - txconf.direction = DMA_TO_DEVICE; - txconf.dst_addr = dws->dma_addr; - txconf.dst_maxburst = LNW_DMA_MSIZE_16; - txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; - - txchan->device->device_control(txchan, DMA_SLAVE_CONFIG, - (unsigned long) &txconf); - - memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl)); - dws->tx_sgl.dma_address = dws->tx_dma; - dws->tx_sgl.length = dws->len; - - txdesc = txchan->device->device_prep_slave_sg(txchan, - &dws->tx_sgl, - 1, - DMA_TO_DEVICE, - DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP); - txdesc->callback = dw_spi_dma_done; - txdesc->callback_param = dws; - - /* 3. Prepare the RX dma transfer */ - rxconf.direction = DMA_FROM_DEVICE; - rxconf.src_addr = dws->dma_addr; - rxconf.src_maxburst = LNW_DMA_MSIZE_16; - rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; - - rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG, - (unsigned long) &rxconf); - - memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl)); - dws->rx_sgl.dma_address = dws->rx_dma; - dws->rx_sgl.length = dws->len; - - rxdesc = rxchan->device->device_prep_slave_sg(rxchan, - &dws->rx_sgl, - 1, - DMA_FROM_DEVICE, - DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP); - rxdesc->callback = dw_spi_dma_done; - rxdesc->callback_param = dws; - - /* rx must be started before tx due to spi instinct */ - rxdesc->tx_submit(rxdesc); - txdesc->tx_submit(txdesc); - return 0; -} - -static struct dw_spi_dma_ops mid_dma_ops = { - .dma_init = mid_spi_dma_init, - .dma_exit = mid_spi_dma_exit, - .dma_transfer = mid_spi_dma_transfer, -}; -#endif - -/* Some specific info for SPI0 controller on Moorestown */ - -/* HW info for MRST CLk Control Unit, one 32b reg */ -#define MRST_SPI_CLK_BASE 100000000 /* 100m */ -#define MRST_CLK_SPI0_REG 0xff11d86c -#define CLK_SPI_BDIV_OFFSET 0 -#define CLK_SPI_BDIV_MASK 0x00000007 -#define CLK_SPI_CDIV_OFFSET 9 -#define CLK_SPI_CDIV_MASK 0x00000e00 -#define CLK_SPI_DISABLE_OFFSET 8 - -int dw_spi_mid_init(struct dw_spi *dws) -{ - u32 *clk_reg, clk_cdiv; - - clk_reg = ioremap_nocache(MRST_CLK_SPI0_REG, 16); - if (!clk_reg) - return -ENOMEM; - - /* get SPI controller operating freq info */ - clk_cdiv = (readl(clk_reg) & CLK_SPI_CDIV_MASK) >> CLK_SPI_CDIV_OFFSET; - dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1); - iounmap(clk_reg); - - dws->num_cs = 16; - dws->fifo_len = 40; /* FIFO has 40 words buffer */ - -#ifdef CONFIG_SPI_DW_MID_DMA - dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL); - if (!dws->dma_priv) - return -ENOMEM; - dws->dma_ops = &mid_dma_ops; -#endif - return 0; -} diff --git a/drivers/spi/dw_spi_mmio.c b/drivers/spi/dw_spi_mmio.c deleted file mode 100644 index e0e813dad150..000000000000 --- a/drivers/spi/dw_spi_mmio.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * dw_spi_mmio.c - Memory-mapped interface driver for DW SPI Core - * - * Copyright (c) 2010, Octasic semiconductor. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "dw_spi.h" - -#define DRIVER_NAME "dw_spi_mmio" - -struct dw_spi_mmio { - struct dw_spi dws; - struct clk *clk; -}; - -static int __devinit dw_spi_mmio_probe(struct platform_device *pdev) -{ - struct dw_spi_mmio *dwsmmio; - struct dw_spi *dws; - struct resource *mem, *ioarea; - int ret; - - dwsmmio = kzalloc(sizeof(struct dw_spi_mmio), GFP_KERNEL); - if (!dwsmmio) { - ret = -ENOMEM; - goto err_end; - } - - dws = &dwsmmio->dws; - - /* Get basic io resource and map it */ - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "no mem resource?\n"); - ret = -EINVAL; - goto err_kfree; - } - - ioarea = request_mem_region(mem->start, resource_size(mem), - pdev->name); - if (!ioarea) { - dev_err(&pdev->dev, "SPI region already claimed\n"); - ret = -EBUSY; - goto err_kfree; - } - - dws->regs = ioremap_nocache(mem->start, resource_size(mem)); - if (!dws->regs) { - dev_err(&pdev->dev, "SPI region already mapped\n"); - ret = -ENOMEM; - goto err_release_reg; - } - - dws->irq = platform_get_irq(pdev, 0); - if (dws->irq < 0) { - dev_err(&pdev->dev, "no irq resource?\n"); - ret = dws->irq; /* -ENXIO */ - goto err_unmap; - } - - dwsmmio->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(dwsmmio->clk)) { - ret = PTR_ERR(dwsmmio->clk); - goto err_irq; - } - clk_enable(dwsmmio->clk); - - dws->parent_dev = &pdev->dev; - dws->bus_num = 0; - dws->num_cs = 4; - dws->max_freq = clk_get_rate(dwsmmio->clk); - - ret = dw_spi_add_host(dws); - if (ret) - goto err_clk; - - platform_set_drvdata(pdev, dwsmmio); - return 0; - -err_clk: - clk_disable(dwsmmio->clk); - clk_put(dwsmmio->clk); - dwsmmio->clk = NULL; -err_irq: - free_irq(dws->irq, dws); -err_unmap: - iounmap(dws->regs); -err_release_reg: - release_mem_region(mem->start, resource_size(mem)); -err_kfree: - kfree(dwsmmio); -err_end: - return ret; -} - -static int __devexit dw_spi_mmio_remove(struct platform_device *pdev) -{ - struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev); - struct resource *mem; - - platform_set_drvdata(pdev, NULL); - - clk_disable(dwsmmio->clk); - clk_put(dwsmmio->clk); - dwsmmio->clk = NULL; - - free_irq(dwsmmio->dws.irq, &dwsmmio->dws); - dw_spi_remove_host(&dwsmmio->dws); - iounmap(dwsmmio->dws.regs); - kfree(dwsmmio); - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - return 0; -} - -static struct platform_driver dw_spi_mmio_driver = { - .remove = __devexit_p(dw_spi_mmio_remove), - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init dw_spi_mmio_init(void) -{ - return platform_driver_probe(&dw_spi_mmio_driver, dw_spi_mmio_probe); -} -module_init(dw_spi_mmio_init); - -static void __exit dw_spi_mmio_exit(void) -{ - platform_driver_unregister(&dw_spi_mmio_driver); -} -module_exit(dw_spi_mmio_exit); - -MODULE_AUTHOR("Jean-Hugues Deschenes "); -MODULE_DESCRIPTION("Memory-mapped I/O interface driver for DW SPI Core"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c deleted file mode 100644 index ad260aa5e526..000000000000 --- a/drivers/spi/dw_spi_pci.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * dw_spi_pci.c - PCI interface driver for DW SPI Core - * - * Copyright (c) 2009, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, - * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include - -#include "dw_spi.h" - -#define DRIVER_NAME "dw_spi_pci" - -struct dw_spi_pci { - struct pci_dev *pdev; - struct dw_spi dws; -}; - -static int __devinit spi_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct dw_spi_pci *dwpci; - struct dw_spi *dws; - int pci_bar = 0; - int ret; - - printk(KERN_INFO "DW: found PCI SPI controller(ID: %04x:%04x)\n", - pdev->vendor, pdev->device); - - ret = pci_enable_device(pdev); - if (ret) - return ret; - - dwpci = kzalloc(sizeof(struct dw_spi_pci), GFP_KERNEL); - if (!dwpci) { - ret = -ENOMEM; - goto err_disable; - } - - dwpci->pdev = pdev; - dws = &dwpci->dws; - - /* Get basic io resource and map it */ - dws->paddr = pci_resource_start(pdev, pci_bar); - dws->iolen = pci_resource_len(pdev, pci_bar); - - ret = pci_request_region(pdev, pci_bar, dev_name(&pdev->dev)); - if (ret) - goto err_kfree; - - dws->regs = ioremap_nocache((unsigned long)dws->paddr, - pci_resource_len(pdev, pci_bar)); - if (!dws->regs) { - ret = -ENOMEM; - goto err_release_reg; - } - - dws->parent_dev = &pdev->dev; - dws->bus_num = 0; - dws->num_cs = 4; - dws->irq = pdev->irq; - - /* - * Specific handling for Intel MID paltforms, like dma setup, - * clock rate, FIFO depth. - */ - if (pdev->device == 0x0800) { - ret = dw_spi_mid_init(dws); - if (ret) - goto err_unmap; - } - - ret = dw_spi_add_host(dws); - if (ret) - goto err_unmap; - - /* PCI hook and SPI hook use the same drv data */ - pci_set_drvdata(pdev, dwpci); - return 0; - -err_unmap: - iounmap(dws->regs); -err_release_reg: - pci_release_region(pdev, pci_bar); -err_kfree: - kfree(dwpci); -err_disable: - pci_disable_device(pdev); - return ret; -} - -static void __devexit spi_pci_remove(struct pci_dev *pdev) -{ - struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); - - pci_set_drvdata(pdev, NULL); - dw_spi_remove_host(&dwpci->dws); - iounmap(dwpci->dws.regs); - pci_release_region(pdev, 0); - kfree(dwpci); - pci_disable_device(pdev); -} - -#ifdef CONFIG_PM -static int spi_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); - int ret; - - ret = dw_spi_suspend_host(&dwpci->dws); - if (ret) - return ret; - pci_save_state(pdev); - pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - return ret; -} - -static int spi_resume(struct pci_dev *pdev) -{ - struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); - int ret; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - ret = pci_enable_device(pdev); - if (ret) - return ret; - return dw_spi_resume_host(&dwpci->dws); -} -#else -#define spi_suspend NULL -#define spi_resume NULL -#endif - -static const struct pci_device_id pci_ids[] __devinitdata = { - /* Intel MID platform SPI controller 0 */ - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) }, - {}, -}; - -static struct pci_driver dw_spi_driver = { - .name = DRIVER_NAME, - .id_table = pci_ids, - .probe = spi_pci_probe, - .remove = __devexit_p(spi_pci_remove), - .suspend = spi_suspend, - .resume = spi_resume, -}; - -static int __init mrst_spi_init(void) -{ - return pci_register_driver(&dw_spi_driver); -} - -static void __exit mrst_spi_exit(void) -{ - pci_unregister_driver(&dw_spi_driver); -} - -module_init(mrst_spi_init); -module_exit(mrst_spi_exit); - -MODULE_AUTHOR("Feng Tang "); -MODULE_DESCRIPTION("PCI interface driver for DW SPI Core"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/ep93xx_spi.c b/drivers/spi/ep93xx_spi.c deleted file mode 100644 index d3570071e98f..000000000000 --- a/drivers/spi/ep93xx_spi.c +++ /dev/null @@ -1,938 +0,0 @@ -/* - * Driver for Cirrus Logic EP93xx SPI controller. - * - * Copyright (c) 2010 Mika Westerberg - * - * Explicit FIFO handling code was inspired by amba-pl022 driver. - * - * Chip select support using other than built-in GPIOs by H. Hartley Sweeten. - * - * For more information about the SPI controller see documentation on Cirrus - * Logic web site: - * http://www.cirrus.com/en/pubs/manual/EP93xx_Users_Guide_UM1.pdf - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define SSPCR0 0x0000 -#define SSPCR0_MODE_SHIFT 6 -#define SSPCR0_SCR_SHIFT 8 - -#define SSPCR1 0x0004 -#define SSPCR1_RIE BIT(0) -#define SSPCR1_TIE BIT(1) -#define SSPCR1_RORIE BIT(2) -#define SSPCR1_LBM BIT(3) -#define SSPCR1_SSE BIT(4) -#define SSPCR1_MS BIT(5) -#define SSPCR1_SOD BIT(6) - -#define SSPDR 0x0008 - -#define SSPSR 0x000c -#define SSPSR_TFE BIT(0) -#define SSPSR_TNF BIT(1) -#define SSPSR_RNE BIT(2) -#define SSPSR_RFF BIT(3) -#define SSPSR_BSY BIT(4) -#define SSPCPSR 0x0010 - -#define SSPIIR 0x0014 -#define SSPIIR_RIS BIT(0) -#define SSPIIR_TIS BIT(1) -#define SSPIIR_RORIS BIT(2) -#define SSPICR SSPIIR - -/* timeout in milliseconds */ -#define SPI_TIMEOUT 5 -/* maximum depth of RX/TX FIFO */ -#define SPI_FIFO_SIZE 8 - -/** - * struct ep93xx_spi - EP93xx SPI controller structure - * @lock: spinlock that protects concurrent accesses to fields @running, - * @current_msg and @msg_queue - * @pdev: pointer to platform device - * @clk: clock for the controller - * @regs_base: pointer to ioremap()'d registers - * @irq: IRQ number used by the driver - * @min_rate: minimum clock rate (in Hz) supported by the controller - * @max_rate: maximum clock rate (in Hz) supported by the controller - * @running: is the queue running - * @wq: workqueue used by the driver - * @msg_work: work that is queued for the driver - * @wait: wait here until given transfer is completed - * @msg_queue: queue for the messages - * @current_msg: message that is currently processed (or %NULL if none) - * @tx: current byte in transfer to transmit - * @rx: current byte in transfer to receive - * @fifo_level: how full is FIFO (%0..%SPI_FIFO_SIZE - %1). Receiving one - * frame decreases this level and sending one frame increases it. - * - * This structure holds EP93xx SPI controller specific information. When - * @running is %true, driver accepts transfer requests from protocol drivers. - * @current_msg is used to hold pointer to the message that is currently - * processed. If @current_msg is %NULL, it means that no processing is going - * on. - * - * Most of the fields are only written once and they can be accessed without - * taking the @lock. Fields that are accessed concurrently are: @current_msg, - * @running, and @msg_queue. - */ -struct ep93xx_spi { - spinlock_t lock; - const struct platform_device *pdev; - struct clk *clk; - void __iomem *regs_base; - int irq; - unsigned long min_rate; - unsigned long max_rate; - bool running; - struct workqueue_struct *wq; - struct work_struct msg_work; - struct completion wait; - struct list_head msg_queue; - struct spi_message *current_msg; - size_t tx; - size_t rx; - size_t fifo_level; -}; - -/** - * struct ep93xx_spi_chip - SPI device hardware settings - * @spi: back pointer to the SPI device - * @rate: max rate in hz this chip supports - * @div_cpsr: cpsr (pre-scaler) divider - * @div_scr: scr divider - * @dss: bits per word (4 - 16 bits) - * @ops: private chip operations - * - * This structure is used to store hardware register specific settings for each - * SPI device. Settings are written to hardware by function - * ep93xx_spi_chip_setup(). - */ -struct ep93xx_spi_chip { - const struct spi_device *spi; - unsigned long rate; - u8 div_cpsr; - u8 div_scr; - u8 dss; - struct ep93xx_spi_chip_ops *ops; -}; - -/* converts bits per word to CR0.DSS value */ -#define bits_per_word_to_dss(bpw) ((bpw) - 1) - -static inline void -ep93xx_spi_write_u8(const struct ep93xx_spi *espi, u16 reg, u8 value) -{ - __raw_writeb(value, espi->regs_base + reg); -} - -static inline u8 -ep93xx_spi_read_u8(const struct ep93xx_spi *spi, u16 reg) -{ - return __raw_readb(spi->regs_base + reg); -} - -static inline void -ep93xx_spi_write_u16(const struct ep93xx_spi *espi, u16 reg, u16 value) -{ - __raw_writew(value, espi->regs_base + reg); -} - -static inline u16 -ep93xx_spi_read_u16(const struct ep93xx_spi *spi, u16 reg) -{ - return __raw_readw(spi->regs_base + reg); -} - -static int ep93xx_spi_enable(const struct ep93xx_spi *espi) -{ - u8 regval; - int err; - - err = clk_enable(espi->clk); - if (err) - return err; - - regval = ep93xx_spi_read_u8(espi, SSPCR1); - regval |= SSPCR1_SSE; - ep93xx_spi_write_u8(espi, SSPCR1, regval); - - return 0; -} - -static void ep93xx_spi_disable(const struct ep93xx_spi *espi) -{ - u8 regval; - - regval = ep93xx_spi_read_u8(espi, SSPCR1); - regval &= ~SSPCR1_SSE; - ep93xx_spi_write_u8(espi, SSPCR1, regval); - - clk_disable(espi->clk); -} - -static void ep93xx_spi_enable_interrupts(const struct ep93xx_spi *espi) -{ - u8 regval; - - regval = ep93xx_spi_read_u8(espi, SSPCR1); - regval |= (SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE); - ep93xx_spi_write_u8(espi, SSPCR1, regval); -} - -static void ep93xx_spi_disable_interrupts(const struct ep93xx_spi *espi) -{ - u8 regval; - - regval = ep93xx_spi_read_u8(espi, SSPCR1); - regval &= ~(SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE); - ep93xx_spi_write_u8(espi, SSPCR1, regval); -} - -/** - * ep93xx_spi_calc_divisors() - calculates SPI clock divisors - * @espi: ep93xx SPI controller struct - * @chip: divisors are calculated for this chip - * @rate: desired SPI output clock rate - * - * Function calculates cpsr (clock pre-scaler) and scr divisors based on - * given @rate and places them to @chip->div_cpsr and @chip->div_scr. If, - * for some reason, divisors cannot be calculated nothing is stored and - * %-EINVAL is returned. - */ -static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi, - struct ep93xx_spi_chip *chip, - unsigned long rate) -{ - unsigned long spi_clk_rate = clk_get_rate(espi->clk); - int cpsr, scr; - - /* - * Make sure that max value is between values supported by the - * controller. Note that minimum value is already checked in - * ep93xx_spi_transfer(). - */ - rate = clamp(rate, espi->min_rate, espi->max_rate); - - /* - * Calculate divisors so that we can get speed according the - * following formula: - * rate = spi_clock_rate / (cpsr * (1 + scr)) - * - * cpsr must be even number and starts from 2, scr can be any number - * between 0 and 255. - */ - for (cpsr = 2; cpsr <= 254; cpsr += 2) { - for (scr = 0; scr <= 255; scr++) { - if ((spi_clk_rate / (cpsr * (scr + 1))) <= rate) { - chip->div_scr = (u8)scr; - chip->div_cpsr = (u8)cpsr; - return 0; - } - } - } - - return -EINVAL; -} - -static void ep93xx_spi_cs_control(struct spi_device *spi, bool control) -{ - struct ep93xx_spi_chip *chip = spi_get_ctldata(spi); - int value = (spi->mode & SPI_CS_HIGH) ? control : !control; - - if (chip->ops && chip->ops->cs_control) - chip->ops->cs_control(spi, value); -} - -/** - * ep93xx_spi_setup() - setup an SPI device - * @spi: SPI device to setup - * - * This function sets up SPI device mode, speed etc. Can be called multiple - * times for a single device. Returns %0 in case of success, negative error in - * case of failure. When this function returns success, the device is - * deselected. - */ -static int ep93xx_spi_setup(struct spi_device *spi) -{ - struct ep93xx_spi *espi = spi_master_get_devdata(spi->master); - struct ep93xx_spi_chip *chip; - - if (spi->bits_per_word < 4 || spi->bits_per_word > 16) { - dev_err(&espi->pdev->dev, "invalid bits per word %d\n", - spi->bits_per_word); - return -EINVAL; - } - - chip = spi_get_ctldata(spi); - if (!chip) { - dev_dbg(&espi->pdev->dev, "initial setup for %s\n", - spi->modalias); - - chip = kzalloc(sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - - chip->spi = spi; - chip->ops = spi->controller_data; - - if (chip->ops && chip->ops->setup) { - int ret = chip->ops->setup(spi); - if (ret) { - kfree(chip); - return ret; - } - } - - spi_set_ctldata(spi, chip); - } - - if (spi->max_speed_hz != chip->rate) { - int err; - - err = ep93xx_spi_calc_divisors(espi, chip, spi->max_speed_hz); - if (err != 0) { - spi_set_ctldata(spi, NULL); - kfree(chip); - return err; - } - chip->rate = spi->max_speed_hz; - } - - chip->dss = bits_per_word_to_dss(spi->bits_per_word); - - ep93xx_spi_cs_control(spi, false); - return 0; -} - -/** - * ep93xx_spi_transfer() - queue message to be transferred - * @spi: target SPI device - * @msg: message to be transferred - * - * This function is called by SPI device drivers when they are going to transfer - * a new message. It simply puts the message in the queue and schedules - * workqueue to perform the actual transfer later on. - * - * Returns %0 on success and negative error in case of failure. - */ -static int ep93xx_spi_transfer(struct spi_device *spi, struct spi_message *msg) -{ - struct ep93xx_spi *espi = spi_master_get_devdata(spi->master); - struct spi_transfer *t; - unsigned long flags; - - if (!msg || !msg->complete) - return -EINVAL; - - /* first validate each transfer */ - list_for_each_entry(t, &msg->transfers, transfer_list) { - if (t->bits_per_word) { - if (t->bits_per_word < 4 || t->bits_per_word > 16) - return -EINVAL; - } - if (t->speed_hz && t->speed_hz < espi->min_rate) - return -EINVAL; - } - - /* - * Now that we own the message, let's initialize it so that it is - * suitable for us. We use @msg->status to signal whether there was - * error in transfer and @msg->state is used to hold pointer to the - * current transfer (or %NULL if no active current transfer). - */ - msg->state = NULL; - msg->status = 0; - msg->actual_length = 0; - - spin_lock_irqsave(&espi->lock, flags); - if (!espi->running) { - spin_unlock_irqrestore(&espi->lock, flags); - return -ESHUTDOWN; - } - list_add_tail(&msg->queue, &espi->msg_queue); - queue_work(espi->wq, &espi->msg_work); - spin_unlock_irqrestore(&espi->lock, flags); - - return 0; -} - -/** - * ep93xx_spi_cleanup() - cleans up master controller specific state - * @spi: SPI device to cleanup - * - * This function releases master controller specific state for given @spi - * device. - */ -static void ep93xx_spi_cleanup(struct spi_device *spi) -{ - struct ep93xx_spi_chip *chip; - - chip = spi_get_ctldata(spi); - if (chip) { - if (chip->ops && chip->ops->cleanup) - chip->ops->cleanup(spi); - spi_set_ctldata(spi, NULL); - kfree(chip); - } -} - -/** - * ep93xx_spi_chip_setup() - configures hardware according to given @chip - * @espi: ep93xx SPI controller struct - * @chip: chip specific settings - * - * This function sets up the actual hardware registers with settings given in - * @chip. Note that no validation is done so make sure that callers validate - * settings before calling this. - */ -static void ep93xx_spi_chip_setup(const struct ep93xx_spi *espi, - const struct ep93xx_spi_chip *chip) -{ - u16 cr0; - - cr0 = chip->div_scr << SSPCR0_SCR_SHIFT; - cr0 |= (chip->spi->mode & (SPI_CPHA|SPI_CPOL)) << SSPCR0_MODE_SHIFT; - cr0 |= chip->dss; - - dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n", - chip->spi->mode, chip->div_cpsr, chip->div_scr, chip->dss); - dev_dbg(&espi->pdev->dev, "setup: cr0 %#x", cr0); - - ep93xx_spi_write_u8(espi, SSPCPSR, chip->div_cpsr); - ep93xx_spi_write_u16(espi, SSPCR0, cr0); -} - -static inline int bits_per_word(const struct ep93xx_spi *espi) -{ - struct spi_message *msg = espi->current_msg; - struct spi_transfer *t = msg->state; - - return t->bits_per_word ? t->bits_per_word : msg->spi->bits_per_word; -} - -static void ep93xx_do_write(struct ep93xx_spi *espi, struct spi_transfer *t) -{ - if (bits_per_word(espi) > 8) { - u16 tx_val = 0; - - if (t->tx_buf) - tx_val = ((u16 *)t->tx_buf)[espi->tx]; - ep93xx_spi_write_u16(espi, SSPDR, tx_val); - espi->tx += sizeof(tx_val); - } else { - u8 tx_val = 0; - - if (t->tx_buf) - tx_val = ((u8 *)t->tx_buf)[espi->tx]; - ep93xx_spi_write_u8(espi, SSPDR, tx_val); - espi->tx += sizeof(tx_val); - } -} - -static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t) -{ - if (bits_per_word(espi) > 8) { - u16 rx_val; - - rx_val = ep93xx_spi_read_u16(espi, SSPDR); - if (t->rx_buf) - ((u16 *)t->rx_buf)[espi->rx] = rx_val; - espi->rx += sizeof(rx_val); - } else { - u8 rx_val; - - rx_val = ep93xx_spi_read_u8(espi, SSPDR); - if (t->rx_buf) - ((u8 *)t->rx_buf)[espi->rx] = rx_val; - espi->rx += sizeof(rx_val); - } -} - -/** - * ep93xx_spi_read_write() - perform next RX/TX transfer - * @espi: ep93xx SPI controller struct - * - * This function transfers next bytes (or half-words) to/from RX/TX FIFOs. If - * called several times, the whole transfer will be completed. Returns - * %-EINPROGRESS when current transfer was not yet completed otherwise %0. - * - * When this function is finished, RX FIFO should be empty and TX FIFO should be - * full. - */ -static int ep93xx_spi_read_write(struct ep93xx_spi *espi) -{ - struct spi_message *msg = espi->current_msg; - struct spi_transfer *t = msg->state; - - /* read as long as RX FIFO has frames in it */ - while ((ep93xx_spi_read_u8(espi, SSPSR) & SSPSR_RNE)) { - ep93xx_do_read(espi, t); - espi->fifo_level--; - } - - /* write as long as TX FIFO has room */ - while (espi->fifo_level < SPI_FIFO_SIZE && espi->tx < t->len) { - ep93xx_do_write(espi, t); - espi->fifo_level++; - } - - if (espi->rx == t->len) { - msg->actual_length += t->len; - return 0; - } - - return -EINPROGRESS; -} - -/** - * ep93xx_spi_process_transfer() - processes one SPI transfer - * @espi: ep93xx SPI controller struct - * @msg: current message - * @t: transfer to process - * - * This function processes one SPI transfer given in @t. Function waits until - * transfer is complete (may sleep) and updates @msg->status based on whether - * transfer was successfully processed or not. - */ -static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, - struct spi_message *msg, - struct spi_transfer *t) -{ - struct ep93xx_spi_chip *chip = spi_get_ctldata(msg->spi); - - msg->state = t; - - /* - * Handle any transfer specific settings if needed. We use - * temporary chip settings here and restore original later when - * the transfer is finished. - */ - if (t->speed_hz || t->bits_per_word) { - struct ep93xx_spi_chip tmp_chip = *chip; - - if (t->speed_hz) { - int err; - - err = ep93xx_spi_calc_divisors(espi, &tmp_chip, - t->speed_hz); - if (err) { - dev_err(&espi->pdev->dev, - "failed to adjust speed\n"); - msg->status = err; - return; - } - } - - if (t->bits_per_word) - tmp_chip.dss = bits_per_word_to_dss(t->bits_per_word); - - /* - * Set up temporary new hw settings for this transfer. - */ - ep93xx_spi_chip_setup(espi, &tmp_chip); - } - - espi->rx = 0; - espi->tx = 0; - - /* - * Now everything is set up for the current transfer. We prime the TX - * FIFO, enable interrupts, and wait for the transfer to complete. - */ - if (ep93xx_spi_read_write(espi)) { - ep93xx_spi_enable_interrupts(espi); - wait_for_completion(&espi->wait); - } - - /* - * In case of error during transmit, we bail out from processing - * the message. - */ - if (msg->status) - return; - - /* - * After this transfer is finished, perform any possible - * post-transfer actions requested by the protocol driver. - */ - if (t->delay_usecs) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(usecs_to_jiffies(t->delay_usecs)); - } - if (t->cs_change) { - if (!list_is_last(&t->transfer_list, &msg->transfers)) { - /* - * In case protocol driver is asking us to drop the - * chipselect briefly, we let the scheduler to handle - * any "delay" here. - */ - ep93xx_spi_cs_control(msg->spi, false); - cond_resched(); - ep93xx_spi_cs_control(msg->spi, true); - } - } - - if (t->speed_hz || t->bits_per_word) - ep93xx_spi_chip_setup(espi, chip); -} - -/* - * ep93xx_spi_process_message() - process one SPI message - * @espi: ep93xx SPI controller struct - * @msg: message to process - * - * This function processes a single SPI message. We go through all transfers in - * the message and pass them to ep93xx_spi_process_transfer(). Chipselect is - * asserted during the whole message (unless per transfer cs_change is set). - * - * @msg->status contains %0 in case of success or negative error code in case of - * failure. - */ -static void ep93xx_spi_process_message(struct ep93xx_spi *espi, - struct spi_message *msg) -{ - unsigned long timeout; - struct spi_transfer *t; - int err; - - /* - * Enable the SPI controller and its clock. - */ - err = ep93xx_spi_enable(espi); - if (err) { - dev_err(&espi->pdev->dev, "failed to enable SPI controller\n"); - msg->status = err; - return; - } - - /* - * Just to be sure: flush any data from RX FIFO. - */ - timeout = jiffies + msecs_to_jiffies(SPI_TIMEOUT); - while (ep93xx_spi_read_u16(espi, SSPSR) & SSPSR_RNE) { - if (time_after(jiffies, timeout)) { - dev_warn(&espi->pdev->dev, - "timeout while flushing RX FIFO\n"); - msg->status = -ETIMEDOUT; - return; - } - ep93xx_spi_read_u16(espi, SSPDR); - } - - /* - * We explicitly handle FIFO level. This way we don't have to check TX - * FIFO status using %SSPSR_TNF bit which may cause RX FIFO overruns. - */ - espi->fifo_level = 0; - - /* - * Update SPI controller registers according to spi device and assert - * the chipselect. - */ - ep93xx_spi_chip_setup(espi, spi_get_ctldata(msg->spi)); - ep93xx_spi_cs_control(msg->spi, true); - - list_for_each_entry(t, &msg->transfers, transfer_list) { - ep93xx_spi_process_transfer(espi, msg, t); - if (msg->status) - break; - } - - /* - * Now the whole message is transferred (or failed for some reason). We - * deselect the device and disable the SPI controller. - */ - ep93xx_spi_cs_control(msg->spi, false); - ep93xx_spi_disable(espi); -} - -#define work_to_espi(work) (container_of((work), struct ep93xx_spi, msg_work)) - -/** - * ep93xx_spi_work() - EP93xx SPI workqueue worker function - * @work: work struct - * - * Workqueue worker function. This function is called when there are new - * SPI messages to be processed. Message is taken out from the queue and then - * passed to ep93xx_spi_process_message(). - * - * After message is transferred, protocol driver is notified by calling - * @msg->complete(). In case of error, @msg->status is set to negative error - * number, otherwise it contains zero (and @msg->actual_length is updated). - */ -static void ep93xx_spi_work(struct work_struct *work) -{ - struct ep93xx_spi *espi = work_to_espi(work); - struct spi_message *msg; - - spin_lock_irq(&espi->lock); - if (!espi->running || espi->current_msg || - list_empty(&espi->msg_queue)) { - spin_unlock_irq(&espi->lock); - return; - } - msg = list_first_entry(&espi->msg_queue, struct spi_message, queue); - list_del_init(&msg->queue); - espi->current_msg = msg; - spin_unlock_irq(&espi->lock); - - ep93xx_spi_process_message(espi, msg); - - /* - * Update the current message and re-schedule ourselves if there are - * more messages in the queue. - */ - spin_lock_irq(&espi->lock); - espi->current_msg = NULL; - if (espi->running && !list_empty(&espi->msg_queue)) - queue_work(espi->wq, &espi->msg_work); - spin_unlock_irq(&espi->lock); - - /* notify the protocol driver that we are done with this message */ - msg->complete(msg->context); -} - -static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id) -{ - struct ep93xx_spi *espi = dev_id; - u8 irq_status = ep93xx_spi_read_u8(espi, SSPIIR); - - /* - * If we got ROR (receive overrun) interrupt we know that something is - * wrong. Just abort the message. - */ - if (unlikely(irq_status & SSPIIR_RORIS)) { - /* clear the overrun interrupt */ - ep93xx_spi_write_u8(espi, SSPICR, 0); - dev_warn(&espi->pdev->dev, - "receive overrun, aborting the message\n"); - espi->current_msg->status = -EIO; - } else { - /* - * Interrupt is either RX (RIS) or TX (TIS). For both cases we - * simply execute next data transfer. - */ - if (ep93xx_spi_read_write(espi)) { - /* - * In normal case, there still is some processing left - * for current transfer. Let's wait for the next - * interrupt then. - */ - return IRQ_HANDLED; - } - } - - /* - * Current transfer is finished, either with error or with success. In - * any case we disable interrupts and notify the worker to handle - * any post-processing of the message. - */ - ep93xx_spi_disable_interrupts(espi); - complete(&espi->wait); - return IRQ_HANDLED; -} - -static int __init ep93xx_spi_probe(struct platform_device *pdev) -{ - struct spi_master *master; - struct ep93xx_spi_info *info; - struct ep93xx_spi *espi; - struct resource *res; - int error; - - info = pdev->dev.platform_data; - - master = spi_alloc_master(&pdev->dev, sizeof(*espi)); - if (!master) { - dev_err(&pdev->dev, "failed to allocate spi master\n"); - return -ENOMEM; - } - - master->setup = ep93xx_spi_setup; - master->transfer = ep93xx_spi_transfer; - master->cleanup = ep93xx_spi_cleanup; - master->bus_num = pdev->id; - master->num_chipselect = info->num_chipselect; - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - - platform_set_drvdata(pdev, master); - - espi = spi_master_get_devdata(master); - - espi->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(espi->clk)) { - dev_err(&pdev->dev, "unable to get spi clock\n"); - error = PTR_ERR(espi->clk); - goto fail_release_master; - } - - spin_lock_init(&espi->lock); - init_completion(&espi->wait); - - /* - * Calculate maximum and minimum supported clock rates - * for the controller. - */ - espi->max_rate = clk_get_rate(espi->clk) / 2; - espi->min_rate = clk_get_rate(espi->clk) / (254 * 256); - espi->pdev = pdev; - - espi->irq = platform_get_irq(pdev, 0); - if (espi->irq < 0) { - error = -EBUSY; - dev_err(&pdev->dev, "failed to get irq resources\n"); - goto fail_put_clock; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "unable to get iomem resource\n"); - error = -ENODEV; - goto fail_put_clock; - } - - res = request_mem_region(res->start, resource_size(res), pdev->name); - if (!res) { - dev_err(&pdev->dev, "unable to request iomem resources\n"); - error = -EBUSY; - goto fail_put_clock; - } - - espi->regs_base = ioremap(res->start, resource_size(res)); - if (!espi->regs_base) { - dev_err(&pdev->dev, "failed to map resources\n"); - error = -ENODEV; - goto fail_free_mem; - } - - error = request_irq(espi->irq, ep93xx_spi_interrupt, 0, - "ep93xx-spi", espi); - if (error) { - dev_err(&pdev->dev, "failed to request irq\n"); - goto fail_unmap_regs; - } - - espi->wq = create_singlethread_workqueue("ep93xx_spid"); - if (!espi->wq) { - dev_err(&pdev->dev, "unable to create workqueue\n"); - goto fail_free_irq; - } - INIT_WORK(&espi->msg_work, ep93xx_spi_work); - INIT_LIST_HEAD(&espi->msg_queue); - espi->running = true; - - /* make sure that the hardware is disabled */ - ep93xx_spi_write_u8(espi, SSPCR1, 0); - - error = spi_register_master(master); - if (error) { - dev_err(&pdev->dev, "failed to register SPI master\n"); - goto fail_free_queue; - } - - dev_info(&pdev->dev, "EP93xx SPI Controller at 0x%08lx irq %d\n", - (unsigned long)res->start, espi->irq); - - return 0; - -fail_free_queue: - destroy_workqueue(espi->wq); -fail_free_irq: - free_irq(espi->irq, espi); -fail_unmap_regs: - iounmap(espi->regs_base); -fail_free_mem: - release_mem_region(res->start, resource_size(res)); -fail_put_clock: - clk_put(espi->clk); -fail_release_master: - spi_master_put(master); - platform_set_drvdata(pdev, NULL); - - return error; -} - -static int __exit ep93xx_spi_remove(struct platform_device *pdev) -{ - struct spi_master *master = platform_get_drvdata(pdev); - struct ep93xx_spi *espi = spi_master_get_devdata(master); - struct resource *res; - - spin_lock_irq(&espi->lock); - espi->running = false; - spin_unlock_irq(&espi->lock); - - destroy_workqueue(espi->wq); - - /* - * Complete remaining messages with %-ESHUTDOWN status. - */ - spin_lock_irq(&espi->lock); - while (!list_empty(&espi->msg_queue)) { - struct spi_message *msg; - - msg = list_first_entry(&espi->msg_queue, - struct spi_message, queue); - list_del_init(&msg->queue); - msg->status = -ESHUTDOWN; - spin_unlock_irq(&espi->lock); - msg->complete(msg->context); - spin_lock_irq(&espi->lock); - } - spin_unlock_irq(&espi->lock); - - free_irq(espi->irq, espi); - iounmap(espi->regs_base); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, resource_size(res)); - clk_put(espi->clk); - platform_set_drvdata(pdev, NULL); - - spi_unregister_master(master); - return 0; -} - -static struct platform_driver ep93xx_spi_driver = { - .driver = { - .name = "ep93xx-spi", - .owner = THIS_MODULE, - }, - .remove = __exit_p(ep93xx_spi_remove), -}; - -static int __init ep93xx_spi_init(void) -{ - return platform_driver_probe(&ep93xx_spi_driver, ep93xx_spi_probe); -} -module_init(ep93xx_spi_init); - -static void __exit ep93xx_spi_exit(void) -{ - platform_driver_unregister(&ep93xx_spi_driver); -} -module_exit(ep93xx_spi_exit); - -MODULE_DESCRIPTION("EP93xx SPI Controller driver"); -MODULE_AUTHOR("Mika Westerberg "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:ep93xx-spi"); diff --git a/drivers/spi/mpc512x_psc_spi.c b/drivers/spi/mpc512x_psc_spi.c deleted file mode 100644 index 6a5b4238fb6b..000000000000 --- a/drivers/spi/mpc512x_psc_spi.c +++ /dev/null @@ -1,577 +0,0 @@ -/* - * MPC512x PSC in SPI mode driver. - * - * Copyright (C) 2007,2008 Freescale Semiconductor Inc. - * Original port from 52xx driver: - * Hongjun Chen - * - * Fork of mpc52xx_psc_spi.c: - * Copyright (C) 2006 TOPTICA Photonics AG., Dragos Carp - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct mpc512x_psc_spi { - void (*cs_control)(struct spi_device *spi, bool on); - u32 sysclk; - - /* driver internal data */ - struct mpc52xx_psc __iomem *psc; - struct mpc512x_psc_fifo __iomem *fifo; - unsigned int irq; - u8 bits_per_word; - u8 busy; - u32 mclk; - u8 eofbyte; - - struct workqueue_struct *workqueue; - struct work_struct work; - - struct list_head queue; - spinlock_t lock; /* Message queue lock */ - - struct completion done; -}; - -/* controller state */ -struct mpc512x_psc_spi_cs { - int bits_per_word; - int speed_hz; -}; - -/* set clock freq, clock ramp, bits per work - * if t is NULL then reset the values to the default values - */ -static int mpc512x_psc_spi_transfer_setup(struct spi_device *spi, - struct spi_transfer *t) -{ - struct mpc512x_psc_spi_cs *cs = spi->controller_state; - - cs->speed_hz = (t && t->speed_hz) - ? t->speed_hz : spi->max_speed_hz; - cs->bits_per_word = (t && t->bits_per_word) - ? t->bits_per_word : spi->bits_per_word; - cs->bits_per_word = ((cs->bits_per_word + 7) / 8) * 8; - return 0; -} - -static void mpc512x_psc_spi_activate_cs(struct spi_device *spi) -{ - struct mpc512x_psc_spi_cs *cs = spi->controller_state; - struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master); - struct mpc52xx_psc __iomem *psc = mps->psc; - u32 sicr; - u32 ccr; - u16 bclkdiv; - - sicr = in_be32(&psc->sicr); - - /* Set clock phase and polarity */ - if (spi->mode & SPI_CPHA) - sicr |= 0x00001000; - else - sicr &= ~0x00001000; - - if (spi->mode & SPI_CPOL) - sicr |= 0x00002000; - else - sicr &= ~0x00002000; - - if (spi->mode & SPI_LSB_FIRST) - sicr |= 0x10000000; - else - sicr &= ~0x10000000; - out_be32(&psc->sicr, sicr); - - ccr = in_be32(&psc->ccr); - ccr &= 0xFF000000; - if (cs->speed_hz) - bclkdiv = (mps->mclk / cs->speed_hz) - 1; - else - bclkdiv = (mps->mclk / 1000000) - 1; /* default 1MHz */ - - ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8)); - out_be32(&psc->ccr, ccr); - mps->bits_per_word = cs->bits_per_word; - - if (mps->cs_control) - mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 1 : 0); -} - -static void mpc512x_psc_spi_deactivate_cs(struct spi_device *spi) -{ - struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master); - - if (mps->cs_control) - mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 0 : 1); - -} - -/* extract and scale size field in txsz or rxsz */ -#define MPC512x_PSC_FIFO_SZ(sz) ((sz & 0x7ff) << 2); - -#define EOFBYTE 1 - -static int mpc512x_psc_spi_transfer_rxtx(struct spi_device *spi, - struct spi_transfer *t) -{ - struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master); - struct mpc52xx_psc __iomem *psc = mps->psc; - struct mpc512x_psc_fifo __iomem *fifo = mps->fifo; - size_t len = t->len; - u8 *tx_buf = (u8 *)t->tx_buf; - u8 *rx_buf = (u8 *)t->rx_buf; - - if (!tx_buf && !rx_buf && t->len) - return -EINVAL; - - /* Zero MR2 */ - in_8(&psc->mode); - out_8(&psc->mode, 0x0); - - while (len) { - int count; - int i; - u8 data; - size_t fifosz; - int rxcount; - - /* - * The number of bytes that can be sent at a time - * depends on the fifo size. - */ - fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->txsz)); - count = min(fifosz, len); - - for (i = count; i > 0; i--) { - data = tx_buf ? *tx_buf++ : 0; - if (len == EOFBYTE) - setbits32(&fifo->txcmd, MPC512x_PSC_FIFO_EOF); - out_8(&fifo->txdata_8, data); - len--; - } - - INIT_COMPLETION(mps->done); - - /* interrupt on tx fifo empty */ - out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY); - out_be32(&fifo->tximr, MPC512x_PSC_FIFO_EMPTY); - - /* enable transmiter/receiver */ - out_8(&psc->command, - MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE); - - wait_for_completion(&mps->done); - - mdelay(1); - - /* rx fifo should have count bytes in it */ - rxcount = in_be32(&fifo->rxcnt); - if (rxcount != count) - mdelay(1); - - rxcount = in_be32(&fifo->rxcnt); - if (rxcount != count) { - dev_warn(&spi->dev, "expected %d bytes in rx fifo " - "but got %d\n", count, rxcount); - } - - rxcount = min(rxcount, count); - for (i = rxcount; i > 0; i--) { - data = in_8(&fifo->rxdata_8); - if (rx_buf) - *rx_buf++ = data; - } - while (in_be32(&fifo->rxcnt)) { - in_8(&fifo->rxdata_8); - } - - out_8(&psc->command, - MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE); - } - /* disable transmiter/receiver and fifo interrupt */ - out_8(&psc->command, MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE); - out_be32(&fifo->tximr, 0); - return 0; -} - -static void mpc512x_psc_spi_work(struct work_struct *work) -{ - struct mpc512x_psc_spi *mps = container_of(work, - struct mpc512x_psc_spi, - work); - - spin_lock_irq(&mps->lock); - mps->busy = 1; - while (!list_empty(&mps->queue)) { - struct spi_message *m; - struct spi_device *spi; - struct spi_transfer *t = NULL; - unsigned cs_change; - int status; - - m = container_of(mps->queue.next, struct spi_message, queue); - list_del_init(&m->queue); - spin_unlock_irq(&mps->lock); - - spi = m->spi; - cs_change = 1; - status = 0; - list_for_each_entry(t, &m->transfers, transfer_list) { - if (t->bits_per_word || t->speed_hz) { - status = mpc512x_psc_spi_transfer_setup(spi, t); - if (status < 0) - break; - } - - if (cs_change) - mpc512x_psc_spi_activate_cs(spi); - cs_change = t->cs_change; - - status = mpc512x_psc_spi_transfer_rxtx(spi, t); - if (status) - break; - m->actual_length += t->len; - - if (t->delay_usecs) - udelay(t->delay_usecs); - - if (cs_change) - mpc512x_psc_spi_deactivate_cs(spi); - } - - m->status = status; - m->complete(m->context); - - if (status || !cs_change) - mpc512x_psc_spi_deactivate_cs(spi); - - mpc512x_psc_spi_transfer_setup(spi, NULL); - - spin_lock_irq(&mps->lock); - } - mps->busy = 0; - spin_unlock_irq(&mps->lock); -} - -static int mpc512x_psc_spi_setup(struct spi_device *spi) -{ - struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master); - struct mpc512x_psc_spi_cs *cs = spi->controller_state; - unsigned long flags; - - if (spi->bits_per_word % 8) - return -EINVAL; - - if (!cs) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); - if (!cs) - return -ENOMEM; - spi->controller_state = cs; - } - - cs->bits_per_word = spi->bits_per_word; - cs->speed_hz = spi->max_speed_hz; - - spin_lock_irqsave(&mps->lock, flags); - if (!mps->busy) - mpc512x_psc_spi_deactivate_cs(spi); - spin_unlock_irqrestore(&mps->lock, flags); - - return 0; -} - -static int mpc512x_psc_spi_transfer(struct spi_device *spi, - struct spi_message *m) -{ - struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master); - unsigned long flags; - - m->actual_length = 0; - m->status = -EINPROGRESS; - - spin_lock_irqsave(&mps->lock, flags); - list_add_tail(&m->queue, &mps->queue); - queue_work(mps->workqueue, &mps->work); - spin_unlock_irqrestore(&mps->lock, flags); - - return 0; -} - -static void mpc512x_psc_spi_cleanup(struct spi_device *spi) -{ - kfree(spi->controller_state); -} - -static int mpc512x_psc_spi_port_config(struct spi_master *master, - struct mpc512x_psc_spi *mps) -{ - struct mpc52xx_psc __iomem *psc = mps->psc; - struct mpc512x_psc_fifo __iomem *fifo = mps->fifo; - struct clk *spiclk; - int ret = 0; - char name[32]; - u32 sicr; - u32 ccr; - u16 bclkdiv; - - sprintf(name, "psc%d_mclk", master->bus_num); - spiclk = clk_get(&master->dev, name); - clk_enable(spiclk); - mps->mclk = clk_get_rate(spiclk); - clk_put(spiclk); - - /* Reset the PSC into a known state */ - out_8(&psc->command, MPC52xx_PSC_RST_RX); - out_8(&psc->command, MPC52xx_PSC_RST_TX); - out_8(&psc->command, MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE); - - /* Disable psc interrupts all useful interrupts are in fifo */ - out_be16(&psc->isr_imr.imr, 0); - - /* Disable fifo interrupts, will be enabled later */ - out_be32(&fifo->tximr, 0); - out_be32(&fifo->rximr, 0); - - /* Setup fifo slice address and size */ - /*out_be32(&fifo->txsz, 0x0fe00004);*/ - /*out_be32(&fifo->rxsz, 0x0ff00004);*/ - - sicr = 0x01000000 | /* SIM = 0001 -- 8 bit */ - 0x00800000 | /* GenClk = 1 -- internal clk */ - 0x00008000 | /* SPI = 1 */ - 0x00004000 | /* MSTR = 1 -- SPI master */ - 0x00000800; /* UseEOF = 1 -- SS low until EOF */ - - out_be32(&psc->sicr, sicr); - - ccr = in_be32(&psc->ccr); - ccr &= 0xFF000000; - bclkdiv = (mps->mclk / 1000000) - 1; /* default 1MHz */ - ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8)); - out_be32(&psc->ccr, ccr); - - /* Set 2ms DTL delay */ - out_8(&psc->ctur, 0x00); - out_8(&psc->ctlr, 0x82); - - /* we don't use the alarms */ - out_be32(&fifo->rxalarm, 0xfff); - out_be32(&fifo->txalarm, 0); - - /* Enable FIFO slices for Rx/Tx */ - out_be32(&fifo->rxcmd, - MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA); - out_be32(&fifo->txcmd, - MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA); - - mps->bits_per_word = 8; - - return ret; -} - -static irqreturn_t mpc512x_psc_spi_isr(int irq, void *dev_id) -{ - struct mpc512x_psc_spi *mps = (struct mpc512x_psc_spi *)dev_id; - struct mpc512x_psc_fifo __iomem *fifo = mps->fifo; - - /* clear interrupt and wake up the work queue */ - if (in_be32(&fifo->txisr) & - in_be32(&fifo->tximr) & MPC512x_PSC_FIFO_EMPTY) { - out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY); - out_be32(&fifo->tximr, 0); - complete(&mps->done); - return IRQ_HANDLED; - } - return IRQ_NONE; -} - -/* bus_num is used only for the case dev->platform_data == NULL */ -static int __devinit mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr, - u32 size, unsigned int irq, - s16 bus_num) -{ - struct fsl_spi_platform_data *pdata = dev->platform_data; - struct mpc512x_psc_spi *mps; - struct spi_master *master; - int ret; - void *tempp; - - master = spi_alloc_master(dev, sizeof *mps); - if (master == NULL) - return -ENOMEM; - - dev_set_drvdata(dev, master); - mps = spi_master_get_devdata(master); - mps->irq = irq; - - if (pdata == NULL) { - dev_err(dev, "probe called without platform data, no " - "cs_control function will be called\n"); - mps->cs_control = NULL; - mps->sysclk = 0; - master->bus_num = bus_num; - master->num_chipselect = 255; - } else { - mps->cs_control = pdata->cs_control; - mps->sysclk = pdata->sysclk; - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->max_chipselect; - } - - master->setup = mpc512x_psc_spi_setup; - master->transfer = mpc512x_psc_spi_transfer; - master->cleanup = mpc512x_psc_spi_cleanup; - master->dev.of_node = dev->of_node; - - tempp = ioremap(regaddr, size); - if (!tempp) { - dev_err(dev, "could not ioremap I/O port range\n"); - ret = -EFAULT; - goto free_master; - } - mps->psc = tempp; - mps->fifo = - (struct mpc512x_psc_fifo *)(tempp + sizeof(struct mpc52xx_psc)); - - ret = request_irq(mps->irq, mpc512x_psc_spi_isr, IRQF_SHARED, - "mpc512x-psc-spi", mps); - if (ret) - goto free_master; - - ret = mpc512x_psc_spi_port_config(master, mps); - if (ret < 0) - goto free_irq; - - spin_lock_init(&mps->lock); - init_completion(&mps->done); - INIT_WORK(&mps->work, mpc512x_psc_spi_work); - INIT_LIST_HEAD(&mps->queue); - - mps->workqueue = - create_singlethread_workqueue(dev_name(master->dev.parent)); - if (mps->workqueue == NULL) { - ret = -EBUSY; - goto free_irq; - } - - ret = spi_register_master(master); - if (ret < 0) - goto unreg_master; - - return ret; - -unreg_master: - destroy_workqueue(mps->workqueue); -free_irq: - free_irq(mps->irq, mps); -free_master: - if (mps->psc) - iounmap(mps->psc); - spi_master_put(master); - - return ret; -} - -static int __devexit mpc512x_psc_spi_do_remove(struct device *dev) -{ - struct spi_master *master = dev_get_drvdata(dev); - struct mpc512x_psc_spi *mps = spi_master_get_devdata(master); - - flush_workqueue(mps->workqueue); - destroy_workqueue(mps->workqueue); - spi_unregister_master(master); - free_irq(mps->irq, mps); - if (mps->psc) - iounmap(mps->psc); - - return 0; -} - -static int __devinit mpc512x_psc_spi_of_probe(struct platform_device *op) -{ - const u32 *regaddr_p; - u64 regaddr64, size64; - s16 id = -1; - - regaddr_p = of_get_address(op->dev.of_node, 0, &size64, NULL); - if (!regaddr_p) { - dev_err(&op->dev, "Invalid PSC address\n"); - return -EINVAL; - } - regaddr64 = of_translate_address(op->dev.of_node, regaddr_p); - - /* get PSC id (0..11, used by port_config) */ - if (op->dev.platform_data == NULL) { - const u32 *psc_nump; - - psc_nump = of_get_property(op->dev.of_node, "cell-index", NULL); - if (!psc_nump || *psc_nump > 11) { - dev_err(&op->dev, "mpc512x_psc_spi: Device node %s " - "has invalid cell-index property\n", - op->dev.of_node->full_name); - return -EINVAL; - } - id = *psc_nump; - } - - return mpc512x_psc_spi_do_probe(&op->dev, (u32) regaddr64, (u32) size64, - irq_of_parse_and_map(op->dev.of_node, 0), id); -} - -static int __devexit mpc512x_psc_spi_of_remove(struct platform_device *op) -{ - return mpc512x_psc_spi_do_remove(&op->dev); -} - -static struct of_device_id mpc512x_psc_spi_of_match[] = { - { .compatible = "fsl,mpc5121-psc-spi", }, - {}, -}; - -MODULE_DEVICE_TABLE(of, mpc512x_psc_spi_of_match); - -static struct platform_driver mpc512x_psc_spi_of_driver = { - .probe = mpc512x_psc_spi_of_probe, - .remove = __devexit_p(mpc512x_psc_spi_of_remove), - .driver = { - .name = "mpc512x-psc-spi", - .owner = THIS_MODULE, - .of_match_table = mpc512x_psc_spi_of_match, - }, -}; - -static int __init mpc512x_psc_spi_init(void) -{ - return platform_driver_register(&mpc512x_psc_spi_of_driver); -} -module_init(mpc512x_psc_spi_init); - -static void __exit mpc512x_psc_spi_exit(void) -{ - platform_driver_unregister(&mpc512x_psc_spi_of_driver); -} -module_exit(mpc512x_psc_spi_exit); - -MODULE_AUTHOR("John Rigby"); -MODULE_DESCRIPTION("MPC512x PSC SPI Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c deleted file mode 100644 index e30baf0852ac..000000000000 --- a/drivers/spi/mpc52xx_psc_spi.c +++ /dev/null @@ -1,529 +0,0 @@ -/* - * MPC52xx PSC in SPI mode driver. - * - * Maintainer: Dragos Carp - * - * Copyright (C) 2006 TOPTICA Photonics AG. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define MCLK 20000000 /* PSC port MClk in hz */ - -struct mpc52xx_psc_spi { - /* fsl_spi_platform data */ - void (*cs_control)(struct spi_device *spi, bool on); - u32 sysclk; - - /* driver internal data */ - struct mpc52xx_psc __iomem *psc; - struct mpc52xx_psc_fifo __iomem *fifo; - unsigned int irq; - u8 bits_per_word; - u8 busy; - - struct workqueue_struct *workqueue; - struct work_struct work; - - struct list_head queue; - spinlock_t lock; - - struct completion done; -}; - -/* controller state */ -struct mpc52xx_psc_spi_cs { - int bits_per_word; - int speed_hz; -}; - -/* set clock freq, clock ramp, bits per work - * if t is NULL then reset the values to the default values - */ -static int mpc52xx_psc_spi_transfer_setup(struct spi_device *spi, - struct spi_transfer *t) -{ - struct mpc52xx_psc_spi_cs *cs = spi->controller_state; - - cs->speed_hz = (t && t->speed_hz) - ? t->speed_hz : spi->max_speed_hz; - cs->bits_per_word = (t && t->bits_per_word) - ? t->bits_per_word : spi->bits_per_word; - cs->bits_per_word = ((cs->bits_per_word + 7) / 8) * 8; - return 0; -} - -static void mpc52xx_psc_spi_activate_cs(struct spi_device *spi) -{ - struct mpc52xx_psc_spi_cs *cs = spi->controller_state; - struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master); - struct mpc52xx_psc __iomem *psc = mps->psc; - u32 sicr; - u16 ccr; - - sicr = in_be32(&psc->sicr); - - /* Set clock phase and polarity */ - if (spi->mode & SPI_CPHA) - sicr |= 0x00001000; - else - sicr &= ~0x00001000; - if (spi->mode & SPI_CPOL) - sicr |= 0x00002000; - else - sicr &= ~0x00002000; - - if (spi->mode & SPI_LSB_FIRST) - sicr |= 0x10000000; - else - sicr &= ~0x10000000; - out_be32(&psc->sicr, sicr); - - /* Set clock frequency and bits per word - * Because psc->ccr is defined as 16bit register instead of 32bit - * just set the lower byte of BitClkDiv - */ - ccr = in_be16((u16 __iomem *)&psc->ccr); - ccr &= 0xFF00; - if (cs->speed_hz) - ccr |= (MCLK / cs->speed_hz - 1) & 0xFF; - else /* by default SPI Clk 1MHz */ - ccr |= (MCLK / 1000000 - 1) & 0xFF; - out_be16((u16 __iomem *)&psc->ccr, ccr); - mps->bits_per_word = cs->bits_per_word; - - if (mps->cs_control) - mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 1 : 0); -} - -static void mpc52xx_psc_spi_deactivate_cs(struct spi_device *spi) -{ - struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master); - - if (mps->cs_control) - mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 0 : 1); -} - -#define MPC52xx_PSC_BUFSIZE (MPC52xx_PSC_RFNUM_MASK + 1) -/* wake up when 80% fifo full */ -#define MPC52xx_PSC_RFALARM (MPC52xx_PSC_BUFSIZE * 20 / 100) - -static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, - struct spi_transfer *t) -{ - struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master); - struct mpc52xx_psc __iomem *psc = mps->psc; - struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo; - unsigned rb = 0; /* number of bytes receieved */ - unsigned sb = 0; /* number of bytes sent */ - unsigned char *rx_buf = (unsigned char *)t->rx_buf; - unsigned char *tx_buf = (unsigned char *)t->tx_buf; - unsigned rfalarm; - unsigned send_at_once = MPC52xx_PSC_BUFSIZE; - unsigned recv_at_once; - int last_block = 0; - - if (!t->tx_buf && !t->rx_buf && t->len) - return -EINVAL; - - /* enable transmiter/receiver */ - out_8(&psc->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE); - while (rb < t->len) { - if (t->len - rb > MPC52xx_PSC_BUFSIZE) { - rfalarm = MPC52xx_PSC_RFALARM; - last_block = 0; - } else { - send_at_once = t->len - sb; - rfalarm = MPC52xx_PSC_BUFSIZE - (t->len - rb); - last_block = 1; - } - - dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once); - for (; send_at_once; sb++, send_at_once--) { - /* set EOF flag before the last word is sent */ - if (send_at_once == 1 && last_block) - out_8(&psc->ircr2, 0x01); - - if (tx_buf) - out_8(&psc->mpc52xx_psc_buffer_8, tx_buf[sb]); - else - out_8(&psc->mpc52xx_psc_buffer_8, 0); - } - - - /* enable interrupts and wait for wake up - * if just one byte is expected the Rx FIFO genererates no - * FFULL interrupt, so activate the RxRDY interrupt - */ - out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); - if (t->len - rb == 1) { - out_8(&psc->mode, 0); - } else { - out_8(&psc->mode, MPC52xx_PSC_MODE_FFULL); - out_be16(&fifo->rfalarm, rfalarm); - } - out_be16(&psc->mpc52xx_psc_imr, MPC52xx_PSC_IMR_RXRDY); - wait_for_completion(&mps->done); - recv_at_once = in_be16(&fifo->rfnum); - dev_dbg(&spi->dev, "%d bytes received\n", recv_at_once); - - send_at_once = recv_at_once; - if (rx_buf) { - for (; recv_at_once; rb++, recv_at_once--) - rx_buf[rb] = in_8(&psc->mpc52xx_psc_buffer_8); - } else { - for (; recv_at_once; rb++, recv_at_once--) - in_8(&psc->mpc52xx_psc_buffer_8); - } - } - /* disable transmiter/receiver */ - out_8(&psc->command, MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE); - - return 0; -} - -static void mpc52xx_psc_spi_work(struct work_struct *work) -{ - struct mpc52xx_psc_spi *mps = - container_of(work, struct mpc52xx_psc_spi, work); - - spin_lock_irq(&mps->lock); - mps->busy = 1; - while (!list_empty(&mps->queue)) { - struct spi_message *m; - struct spi_device *spi; - struct spi_transfer *t = NULL; - unsigned cs_change; - int status; - - m = container_of(mps->queue.next, struct spi_message, queue); - list_del_init(&m->queue); - spin_unlock_irq(&mps->lock); - - spi = m->spi; - cs_change = 1; - status = 0; - list_for_each_entry (t, &m->transfers, transfer_list) { - if (t->bits_per_word || t->speed_hz) { - status = mpc52xx_psc_spi_transfer_setup(spi, t); - if (status < 0) - break; - } - - if (cs_change) - mpc52xx_psc_spi_activate_cs(spi); - cs_change = t->cs_change; - - status = mpc52xx_psc_spi_transfer_rxtx(spi, t); - if (status) - break; - m->actual_length += t->len; - - if (t->delay_usecs) - udelay(t->delay_usecs); - - if (cs_change) - mpc52xx_psc_spi_deactivate_cs(spi); - } - - m->status = status; - m->complete(m->context); - - if (status || !cs_change) - mpc52xx_psc_spi_deactivate_cs(spi); - - mpc52xx_psc_spi_transfer_setup(spi, NULL); - - spin_lock_irq(&mps->lock); - } - mps->busy = 0; - spin_unlock_irq(&mps->lock); -} - -static int mpc52xx_psc_spi_setup(struct spi_device *spi) -{ - struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master); - struct mpc52xx_psc_spi_cs *cs = spi->controller_state; - unsigned long flags; - - if (spi->bits_per_word%8) - return -EINVAL; - - if (!cs) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); - if (!cs) - return -ENOMEM; - spi->controller_state = cs; - } - - cs->bits_per_word = spi->bits_per_word; - cs->speed_hz = spi->max_speed_hz; - - spin_lock_irqsave(&mps->lock, flags); - if (!mps->busy) - mpc52xx_psc_spi_deactivate_cs(spi); - spin_unlock_irqrestore(&mps->lock, flags); - - return 0; -} - -static int mpc52xx_psc_spi_transfer(struct spi_device *spi, - struct spi_message *m) -{ - struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master); - unsigned long flags; - - m->actual_length = 0; - m->status = -EINPROGRESS; - - spin_lock_irqsave(&mps->lock, flags); - list_add_tail(&m->queue, &mps->queue); - queue_work(mps->workqueue, &mps->work); - spin_unlock_irqrestore(&mps->lock, flags); - - return 0; -} - -static void mpc52xx_psc_spi_cleanup(struct spi_device *spi) -{ - kfree(spi->controller_state); -} - -static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps) -{ - struct mpc52xx_psc __iomem *psc = mps->psc; - struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo; - u32 mclken_div; - int ret; - - /* default sysclk is 512MHz */ - mclken_div = (mps->sysclk ? mps->sysclk : 512000000) / MCLK; - ret = mpc52xx_set_psc_clkdiv(psc_id, mclken_div); - if (ret) - return ret; - - /* Reset the PSC into a known state */ - out_8(&psc->command, MPC52xx_PSC_RST_RX); - out_8(&psc->command, MPC52xx_PSC_RST_TX); - out_8(&psc->command, MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE); - - /* Disable interrupts, interrupts are based on alarm level */ - out_be16(&psc->mpc52xx_psc_imr, 0); - out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); - out_8(&fifo->rfcntl, 0); - out_8(&psc->mode, MPC52xx_PSC_MODE_FFULL); - - /* Configure 8bit codec mode as a SPI master and use EOF flags */ - /* SICR_SIM_CODEC8|SICR_GENCLK|SICR_SPI|SICR_MSTR|SICR_USEEOF */ - out_be32(&psc->sicr, 0x0180C800); - out_be16((u16 __iomem *)&psc->ccr, 0x070F); /* default SPI Clk 1MHz */ - - /* Set 2ms DTL delay */ - out_8(&psc->ctur, 0x00); - out_8(&psc->ctlr, 0x84); - - mps->bits_per_word = 8; - - return 0; -} - -static irqreturn_t mpc52xx_psc_spi_isr(int irq, void *dev_id) -{ - struct mpc52xx_psc_spi *mps = (struct mpc52xx_psc_spi *)dev_id; - struct mpc52xx_psc __iomem *psc = mps->psc; - - /* disable interrupt and wake up the work queue */ - if (in_be16(&psc->mpc52xx_psc_isr) & MPC52xx_PSC_IMR_RXRDY) { - out_be16(&psc->mpc52xx_psc_imr, 0); - complete(&mps->done); - return IRQ_HANDLED; - } - return IRQ_NONE; -} - -/* bus_num is used only for the case dev->platform_data == NULL */ -static int __devinit mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr, - u32 size, unsigned int irq, s16 bus_num) -{ - struct fsl_spi_platform_data *pdata = dev->platform_data; - struct mpc52xx_psc_spi *mps; - struct spi_master *master; - int ret; - - master = spi_alloc_master(dev, sizeof *mps); - if (master == NULL) - return -ENOMEM; - - dev_set_drvdata(dev, master); - mps = spi_master_get_devdata(master); - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST; - - mps->irq = irq; - if (pdata == NULL) { - dev_warn(dev, "probe called without platform data, no " - "cs_control function will be called\n"); - mps->cs_control = NULL; - mps->sysclk = 0; - master->bus_num = bus_num; - master->num_chipselect = 255; - } else { - mps->cs_control = pdata->cs_control; - mps->sysclk = pdata->sysclk; - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->max_chipselect; - } - master->setup = mpc52xx_psc_spi_setup; - master->transfer = mpc52xx_psc_spi_transfer; - master->cleanup = mpc52xx_psc_spi_cleanup; - master->dev.of_node = dev->of_node; - - mps->psc = ioremap(regaddr, size); - if (!mps->psc) { - dev_err(dev, "could not ioremap I/O port range\n"); - ret = -EFAULT; - goto free_master; - } - /* On the 5200, fifo regs are immediately ajacent to the psc regs */ - mps->fifo = ((void __iomem *)mps->psc) + sizeof(struct mpc52xx_psc); - - ret = request_irq(mps->irq, mpc52xx_psc_spi_isr, 0, "mpc52xx-psc-spi", - mps); - if (ret) - goto free_master; - - ret = mpc52xx_psc_spi_port_config(master->bus_num, mps); - if (ret < 0) { - dev_err(dev, "can't configure PSC! Is it capable of SPI?\n"); - goto free_irq; - } - - spin_lock_init(&mps->lock); - init_completion(&mps->done); - INIT_WORK(&mps->work, mpc52xx_psc_spi_work); - INIT_LIST_HEAD(&mps->queue); - - mps->workqueue = create_singlethread_workqueue( - dev_name(master->dev.parent)); - if (mps->workqueue == NULL) { - ret = -EBUSY; - goto free_irq; - } - - ret = spi_register_master(master); - if (ret < 0) - goto unreg_master; - - return ret; - -unreg_master: - destroy_workqueue(mps->workqueue); -free_irq: - free_irq(mps->irq, mps); -free_master: - if (mps->psc) - iounmap(mps->psc); - spi_master_put(master); - - return ret; -} - -static int __devinit mpc52xx_psc_spi_of_probe(struct platform_device *op) -{ - const u32 *regaddr_p; - u64 regaddr64, size64; - s16 id = -1; - - regaddr_p = of_get_address(op->dev.of_node, 0, &size64, NULL); - if (!regaddr_p) { - dev_err(&op->dev, "Invalid PSC address\n"); - return -EINVAL; - } - regaddr64 = of_translate_address(op->dev.of_node, regaddr_p); - - /* get PSC id (1..6, used by port_config) */ - if (op->dev.platform_data == NULL) { - const u32 *psc_nump; - - psc_nump = of_get_property(op->dev.of_node, "cell-index", NULL); - if (!psc_nump || *psc_nump > 5) { - dev_err(&op->dev, "Invalid cell-index property\n"); - return -EINVAL; - } - id = *psc_nump + 1; - } - - return mpc52xx_psc_spi_do_probe(&op->dev, (u32)regaddr64, (u32)size64, - irq_of_parse_and_map(op->dev.of_node, 0), id); -} - -static int __devexit mpc52xx_psc_spi_of_remove(struct platform_device *op) -{ - struct spi_master *master = dev_get_drvdata(&op->dev); - struct mpc52xx_psc_spi *mps = spi_master_get_devdata(master); - - flush_workqueue(mps->workqueue); - destroy_workqueue(mps->workqueue); - spi_unregister_master(master); - free_irq(mps->irq, mps); - if (mps->psc) - iounmap(mps->psc); - - return 0; -} - -static const struct of_device_id mpc52xx_psc_spi_of_match[] = { - { .compatible = "fsl,mpc5200-psc-spi", }, - { .compatible = "mpc5200-psc-spi", }, /* old */ - {} -}; - -MODULE_DEVICE_TABLE(of, mpc52xx_psc_spi_of_match); - -static struct platform_driver mpc52xx_psc_spi_of_driver = { - .probe = mpc52xx_psc_spi_of_probe, - .remove = __devexit_p(mpc52xx_psc_spi_of_remove), - .driver = { - .name = "mpc52xx-psc-spi", - .owner = THIS_MODULE, - .of_match_table = mpc52xx_psc_spi_of_match, - }, -}; - -static int __init mpc52xx_psc_spi_init(void) -{ - return platform_driver_register(&mpc52xx_psc_spi_of_driver); -} -module_init(mpc52xx_psc_spi_init); - -static void __exit mpc52xx_psc_spi_exit(void) -{ - platform_driver_unregister(&mpc52xx_psc_spi_of_driver); -} -module_exit(mpc52xx_psc_spi_exit); - -MODULE_AUTHOR("Dragos Carp"); -MODULE_DESCRIPTION("MPC52xx PSC SPI Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/mpc52xx_spi.c b/drivers/spi/mpc52xx_spi.c deleted file mode 100644 index 015a974bed72..000000000000 --- a/drivers/spi/mpc52xx_spi.c +++ /dev/null @@ -1,579 +0,0 @@ -/* - * MPC52xx SPI bus driver. - * - * Copyright (C) 2008 Secret Lab Technologies Ltd. - * - * This file is released under the GPLv2 - * - * This is the driver for the MPC5200's dedicated SPI controller. - * - * Note: this driver does not support the MPC5200 PSC in SPI mode. For - * that driver see drivers/spi/mpc52xx_psc_spi.c - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -MODULE_AUTHOR("Grant Likely "); -MODULE_DESCRIPTION("MPC52xx SPI (non-PSC) Driver"); -MODULE_LICENSE("GPL"); - -/* Register offsets */ -#define SPI_CTRL1 0x00 -#define SPI_CTRL1_SPIE (1 << 7) -#define SPI_CTRL1_SPE (1 << 6) -#define SPI_CTRL1_MSTR (1 << 4) -#define SPI_CTRL1_CPOL (1 << 3) -#define SPI_CTRL1_CPHA (1 << 2) -#define SPI_CTRL1_SSOE (1 << 1) -#define SPI_CTRL1_LSBFE (1 << 0) - -#define SPI_CTRL2 0x01 -#define SPI_BRR 0x04 - -#define SPI_STATUS 0x05 -#define SPI_STATUS_SPIF (1 << 7) -#define SPI_STATUS_WCOL (1 << 6) -#define SPI_STATUS_MODF (1 << 4) - -#define SPI_DATA 0x09 -#define SPI_PORTDATA 0x0d -#define SPI_DATADIR 0x10 - -/* FSM state return values */ -#define FSM_STOP 0 /* Nothing more for the state machine to */ - /* do. If something interesting happens */ - /* then an IRQ will be received */ -#define FSM_POLL 1 /* need to poll for completion, an IRQ is */ - /* not expected */ -#define FSM_CONTINUE 2 /* Keep iterating the state machine */ - -/* Driver internal data */ -struct mpc52xx_spi { - struct spi_master *master; - void __iomem *regs; - int irq0; /* MODF irq */ - int irq1; /* SPIF irq */ - unsigned int ipb_freq; - - /* Statistics; not used now, but will be reintroduced for debugfs */ - int msg_count; - int wcol_count; - int wcol_ticks; - u32 wcol_tx_timestamp; - int modf_count; - int byte_count; - - struct list_head queue; /* queue of pending messages */ - spinlock_t lock; - struct work_struct work; - - /* Details of current transfer (length, and buffer pointers) */ - struct spi_message *message; /* current message */ - struct spi_transfer *transfer; /* current transfer */ - int (*state)(int irq, struct mpc52xx_spi *ms, u8 status, u8 data); - int len; - int timestamp; - u8 *rx_buf; - const u8 *tx_buf; - int cs_change; - int gpio_cs_count; - unsigned int *gpio_cs; -}; - -/* - * CS control function - */ -static void mpc52xx_spi_chipsel(struct mpc52xx_spi *ms, int value) -{ - int cs; - - if (ms->gpio_cs_count > 0) { - cs = ms->message->spi->chip_select; - gpio_set_value(ms->gpio_cs[cs], value ? 0 : 1); - } else - out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08); -} - -/* - * Start a new transfer. This is called both by the idle state - * for the first transfer in a message, and by the wait state when the - * previous transfer in a message is complete. - */ -static void mpc52xx_spi_start_transfer(struct mpc52xx_spi *ms) -{ - ms->rx_buf = ms->transfer->rx_buf; - ms->tx_buf = ms->transfer->tx_buf; - ms->len = ms->transfer->len; - - /* Activate the chip select */ - if (ms->cs_change) - mpc52xx_spi_chipsel(ms, 1); - ms->cs_change = ms->transfer->cs_change; - - /* Write out the first byte */ - ms->wcol_tx_timestamp = get_tbl(); - if (ms->tx_buf) - out_8(ms->regs + SPI_DATA, *ms->tx_buf++); - else - out_8(ms->regs + SPI_DATA, 0); -} - -/* Forward declaration of state handlers */ -static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms, - u8 status, u8 data); -static int mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms, - u8 status, u8 data); - -/* - * IDLE state - * - * No transfers are in progress; if another transfer is pending then retrieve - * it and kick it off. Otherwise, stop processing the state machine - */ -static int -mpc52xx_spi_fsmstate_idle(int irq, struct mpc52xx_spi *ms, u8 status, u8 data) -{ - struct spi_device *spi; - int spr, sppr; - u8 ctrl1; - - if (status && (irq != NO_IRQ)) - dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n", - status); - - /* Check if there is another transfer waiting. */ - if (list_empty(&ms->queue)) - return FSM_STOP; - - /* get the head of the queue */ - ms->message = list_first_entry(&ms->queue, struct spi_message, queue); - list_del_init(&ms->message->queue); - - /* Setup the controller parameters */ - ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR; - spi = ms->message->spi; - if (spi->mode & SPI_CPHA) - ctrl1 |= SPI_CTRL1_CPHA; - if (spi->mode & SPI_CPOL) - ctrl1 |= SPI_CTRL1_CPOL; - if (spi->mode & SPI_LSB_FIRST) - ctrl1 |= SPI_CTRL1_LSBFE; - out_8(ms->regs + SPI_CTRL1, ctrl1); - - /* Setup the controller speed */ - /* minimum divider is '2'. Also, add '1' to force rounding the - * divider up. */ - sppr = ((ms->ipb_freq / ms->message->spi->max_speed_hz) + 1) >> 1; - spr = 0; - if (sppr < 1) - sppr = 1; - while (((sppr - 1) & ~0x7) != 0) { - sppr = (sppr + 1) >> 1; /* add '1' to force rounding up */ - spr++; - } - sppr--; /* sppr quantity in register is offset by 1 */ - if (spr > 7) { - /* Don't overrun limits of SPI baudrate register */ - spr = 7; - sppr = 7; - } - out_8(ms->regs + SPI_BRR, sppr << 4 | spr); /* Set speed */ - - ms->cs_change = 1; - ms->transfer = container_of(ms->message->transfers.next, - struct spi_transfer, transfer_list); - - mpc52xx_spi_start_transfer(ms); - ms->state = mpc52xx_spi_fsmstate_transfer; - - return FSM_CONTINUE; -} - -/* - * TRANSFER state - * - * In the middle of a transfer. If the SPI core has completed processing - * a byte, then read out the received data and write out the next byte - * (unless this transfer is finished; in which case go on to the wait - * state) - */ -static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms, - u8 status, u8 data) -{ - if (!status) - return ms->irq0 ? FSM_STOP : FSM_POLL; - - if (status & SPI_STATUS_WCOL) { - /* The SPI controller is stoopid. At slower speeds, it may - * raise the SPIF flag before the state machine is actually - * finished, which causes a collision (internal to the state - * machine only). The manual recommends inserting a delay - * between receiving the interrupt and sending the next byte, - * but it can also be worked around simply by retrying the - * transfer which is what we do here. */ - ms->wcol_count++; - ms->wcol_ticks += get_tbl() - ms->wcol_tx_timestamp; - ms->wcol_tx_timestamp = get_tbl(); - data = 0; - if (ms->tx_buf) - data = *(ms->tx_buf - 1); - out_8(ms->regs + SPI_DATA, data); /* try again */ - return FSM_CONTINUE; - } else if (status & SPI_STATUS_MODF) { - ms->modf_count++; - dev_err(&ms->master->dev, "mode fault\n"); - mpc52xx_spi_chipsel(ms, 0); - ms->message->status = -EIO; - ms->message->complete(ms->message->context); - ms->state = mpc52xx_spi_fsmstate_idle; - return FSM_CONTINUE; - } - - /* Read data out of the spi device */ - ms->byte_count++; - if (ms->rx_buf) - *ms->rx_buf++ = data; - - /* Is the transfer complete? */ - ms->len--; - if (ms->len == 0) { - ms->timestamp = get_tbl(); - ms->timestamp += ms->transfer->delay_usecs * tb_ticks_per_usec; - ms->state = mpc52xx_spi_fsmstate_wait; - return FSM_CONTINUE; - } - - /* Write out the next byte */ - ms->wcol_tx_timestamp = get_tbl(); - if (ms->tx_buf) - out_8(ms->regs + SPI_DATA, *ms->tx_buf++); - else - out_8(ms->regs + SPI_DATA, 0); - - return FSM_CONTINUE; -} - -/* - * WAIT state - * - * A transfer has completed; need to wait for the delay period to complete - * before starting the next transfer - */ -static int -mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms, u8 status, u8 data) -{ - if (status && irq) - dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n", - status); - - if (((int)get_tbl()) - ms->timestamp < 0) - return FSM_POLL; - - ms->message->actual_length += ms->transfer->len; - - /* Check if there is another transfer in this message. If there - * aren't then deactivate CS, notify sender, and drop back to idle - * to start the next message. */ - if (ms->transfer->transfer_list.next == &ms->message->transfers) { - ms->msg_count++; - mpc52xx_spi_chipsel(ms, 0); - ms->message->status = 0; - ms->message->complete(ms->message->context); - ms->state = mpc52xx_spi_fsmstate_idle; - return FSM_CONTINUE; - } - - /* There is another transfer; kick it off */ - - if (ms->cs_change) - mpc52xx_spi_chipsel(ms, 0); - - ms->transfer = container_of(ms->transfer->transfer_list.next, - struct spi_transfer, transfer_list); - mpc52xx_spi_start_transfer(ms); - ms->state = mpc52xx_spi_fsmstate_transfer; - return FSM_CONTINUE; -} - -/** - * mpc52xx_spi_fsm_process - Finite State Machine iteration function - * @irq: irq number that triggered the FSM or 0 for polling - * @ms: pointer to mpc52xx_spi driver data - */ -static void mpc52xx_spi_fsm_process(int irq, struct mpc52xx_spi *ms) -{ - int rc = FSM_CONTINUE; - u8 status, data; - - while (rc == FSM_CONTINUE) { - /* Interrupt cleared by read of STATUS followed by - * read of DATA registers */ - status = in_8(ms->regs + SPI_STATUS); - data = in_8(ms->regs + SPI_DATA); - rc = ms->state(irq, ms, status, data); - } - - if (rc == FSM_POLL) - schedule_work(&ms->work); -} - -/** - * mpc52xx_spi_irq - IRQ handler - */ -static irqreturn_t mpc52xx_spi_irq(int irq, void *_ms) -{ - struct mpc52xx_spi *ms = _ms; - spin_lock(&ms->lock); - mpc52xx_spi_fsm_process(irq, ms); - spin_unlock(&ms->lock); - return IRQ_HANDLED; -} - -/** - * mpc52xx_spi_wq - Workqueue function for polling the state machine - */ -static void mpc52xx_spi_wq(struct work_struct *work) -{ - struct mpc52xx_spi *ms = container_of(work, struct mpc52xx_spi, work); - unsigned long flags; - - spin_lock_irqsave(&ms->lock, flags); - mpc52xx_spi_fsm_process(0, ms); - spin_unlock_irqrestore(&ms->lock, flags); -} - -/* - * spi_master ops - */ - -static int mpc52xx_spi_setup(struct spi_device *spi) -{ - if (spi->bits_per_word % 8) - return -EINVAL; - - if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) - return -EINVAL; - - if (spi->chip_select >= spi->master->num_chipselect) - return -EINVAL; - - return 0; -} - -static int mpc52xx_spi_transfer(struct spi_device *spi, struct spi_message *m) -{ - struct mpc52xx_spi *ms = spi_master_get_devdata(spi->master); - unsigned long flags; - - m->actual_length = 0; - m->status = -EINPROGRESS; - - spin_lock_irqsave(&ms->lock, flags); - list_add_tail(&m->queue, &ms->queue); - spin_unlock_irqrestore(&ms->lock, flags); - schedule_work(&ms->work); - - return 0; -} - -/* - * OF Platform Bus Binding - */ -static int __devinit mpc52xx_spi_probe(struct platform_device *op) -{ - struct spi_master *master; - struct mpc52xx_spi *ms; - void __iomem *regs; - u8 ctrl1; - int rc, i = 0; - int gpio_cs; - - /* MMIO registers */ - dev_dbg(&op->dev, "probing mpc5200 SPI device\n"); - regs = of_iomap(op->dev.of_node, 0); - if (!regs) - return -ENODEV; - - /* initialize the device */ - ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR; - out_8(regs + SPI_CTRL1, ctrl1); - out_8(regs + SPI_CTRL2, 0x0); - out_8(regs + SPI_DATADIR, 0xe); /* Set output pins */ - out_8(regs + SPI_PORTDATA, 0x8); /* Deassert /SS signal */ - - /* Clear the status register and re-read it to check for a MODF - * failure. This driver cannot currently handle multiple masters - * on the SPI bus. This fault will also occur if the SPI signals - * are not connected to any pins (port_config setting) */ - in_8(regs + SPI_STATUS); - out_8(regs + SPI_CTRL1, ctrl1); - - in_8(regs + SPI_DATA); - if (in_8(regs + SPI_STATUS) & SPI_STATUS_MODF) { - dev_err(&op->dev, "mode fault; is port_config correct?\n"); - rc = -EIO; - goto err_init; - } - - dev_dbg(&op->dev, "allocating spi_master struct\n"); - master = spi_alloc_master(&op->dev, sizeof *ms); - if (!master) { - rc = -ENOMEM; - goto err_alloc; - } - - master->bus_num = -1; - master->setup = mpc52xx_spi_setup; - master->transfer = mpc52xx_spi_transfer; - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; - master->dev.of_node = op->dev.of_node; - - dev_set_drvdata(&op->dev, master); - - ms = spi_master_get_devdata(master); - ms->master = master; - ms->regs = regs; - ms->irq0 = irq_of_parse_and_map(op->dev.of_node, 0); - ms->irq1 = irq_of_parse_and_map(op->dev.of_node, 1); - ms->state = mpc52xx_spi_fsmstate_idle; - ms->ipb_freq = mpc5xxx_get_bus_frequency(op->dev.of_node); - ms->gpio_cs_count = of_gpio_count(op->dev.of_node); - if (ms->gpio_cs_count > 0) { - master->num_chipselect = ms->gpio_cs_count; - ms->gpio_cs = kmalloc(ms->gpio_cs_count * sizeof(unsigned int), - GFP_KERNEL); - if (!ms->gpio_cs) { - rc = -ENOMEM; - goto err_alloc; - } - - for (i = 0; i < ms->gpio_cs_count; i++) { - gpio_cs = of_get_gpio(op->dev.of_node, i); - if (gpio_cs < 0) { - dev_err(&op->dev, - "could not parse the gpio field " - "in oftree\n"); - rc = -ENODEV; - goto err_gpio; - } - - rc = gpio_request(gpio_cs, dev_name(&op->dev)); - if (rc) { - dev_err(&op->dev, - "can't request spi cs gpio #%d " - "on gpio line %d\n", i, gpio_cs); - goto err_gpio; - } - - gpio_direction_output(gpio_cs, 1); - ms->gpio_cs[i] = gpio_cs; - } - } else { - master->num_chipselect = 1; - } - - spin_lock_init(&ms->lock); - INIT_LIST_HEAD(&ms->queue); - INIT_WORK(&ms->work, mpc52xx_spi_wq); - - /* Decide if interrupts can be used */ - if (ms->irq0 && ms->irq1) { - rc = request_irq(ms->irq0, mpc52xx_spi_irq, 0, - "mpc5200-spi-modf", ms); - rc |= request_irq(ms->irq1, mpc52xx_spi_irq, 0, - "mpc5200-spi-spif", ms); - if (rc) { - free_irq(ms->irq0, ms); - free_irq(ms->irq1, ms); - ms->irq0 = ms->irq1 = 0; - } - } else { - /* operate in polled mode */ - ms->irq0 = ms->irq1 = 0; - } - - if (!ms->irq0) - dev_info(&op->dev, "using polled mode\n"); - - dev_dbg(&op->dev, "registering spi_master struct\n"); - rc = spi_register_master(master); - if (rc) - goto err_register; - - dev_info(&ms->master->dev, "registered MPC5200 SPI bus\n"); - - return rc; - - err_register: - dev_err(&ms->master->dev, "initialization failed\n"); - spi_master_put(master); - err_gpio: - while (i-- > 0) - gpio_free(ms->gpio_cs[i]); - - kfree(ms->gpio_cs); - err_alloc: - err_init: - iounmap(regs); - return rc; -} - -static int __devexit mpc52xx_spi_remove(struct platform_device *op) -{ - struct spi_master *master = dev_get_drvdata(&op->dev); - struct mpc52xx_spi *ms = spi_master_get_devdata(master); - int i; - - free_irq(ms->irq0, ms); - free_irq(ms->irq1, ms); - - for (i = 0; i < ms->gpio_cs_count; i++) - gpio_free(ms->gpio_cs[i]); - - kfree(ms->gpio_cs); - spi_unregister_master(master); - spi_master_put(master); - iounmap(ms->regs); - - return 0; -} - -static const struct of_device_id mpc52xx_spi_match[] __devinitconst = { - { .compatible = "fsl,mpc5200-spi", }, - {} -}; -MODULE_DEVICE_TABLE(of, mpc52xx_spi_match); - -static struct platform_driver mpc52xx_spi_of_driver = { - .driver = { - .name = "mpc52xx-spi", - .owner = THIS_MODULE, - .of_match_table = mpc52xx_spi_match, - }, - .probe = mpc52xx_spi_probe, - .remove = __devexit_p(mpc52xx_spi_remove), -}; - -static int __init mpc52xx_spi_init(void) -{ - return platform_driver_register(&mpc52xx_spi_of_driver); -} -module_init(mpc52xx_spi_init); - -static void __exit mpc52xx_spi_exit(void) -{ - platform_driver_unregister(&mpc52xx_spi_of_driver); -} -module_exit(mpc52xx_spi_exit); - diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c deleted file mode 100644 index 969cdd2fe124..000000000000 --- a/drivers/spi/omap2_mcspi.c +++ /dev/null @@ -1,1293 +0,0 @@ -/* - * OMAP2 McSPI controller driver - * - * Copyright (C) 2005, 2006 Nokia Corporation - * Author: Samuel Ortiz and - * Juha Yrj�l� - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -#define OMAP2_MCSPI_MAX_FREQ 48000000 - -/* OMAP2 has 3 SPI controllers, while OMAP3 has 4 */ -#define OMAP2_MCSPI_MAX_CTRL 4 - -#define OMAP2_MCSPI_REVISION 0x00 -#define OMAP2_MCSPI_SYSSTATUS 0x14 -#define OMAP2_MCSPI_IRQSTATUS 0x18 -#define OMAP2_MCSPI_IRQENABLE 0x1c -#define OMAP2_MCSPI_WAKEUPENABLE 0x20 -#define OMAP2_MCSPI_SYST 0x24 -#define OMAP2_MCSPI_MODULCTRL 0x28 - -/* per-channel banks, 0x14 bytes each, first is: */ -#define OMAP2_MCSPI_CHCONF0 0x2c -#define OMAP2_MCSPI_CHSTAT0 0x30 -#define OMAP2_MCSPI_CHCTRL0 0x34 -#define OMAP2_MCSPI_TX0 0x38 -#define OMAP2_MCSPI_RX0 0x3c - -/* per-register bitmasks: */ - -#define OMAP2_MCSPI_MODULCTRL_SINGLE BIT(0) -#define OMAP2_MCSPI_MODULCTRL_MS BIT(2) -#define OMAP2_MCSPI_MODULCTRL_STEST BIT(3) - -#define OMAP2_MCSPI_CHCONF_PHA BIT(0) -#define OMAP2_MCSPI_CHCONF_POL BIT(1) -#define OMAP2_MCSPI_CHCONF_CLKD_MASK (0x0f << 2) -#define OMAP2_MCSPI_CHCONF_EPOL BIT(6) -#define OMAP2_MCSPI_CHCONF_WL_MASK (0x1f << 7) -#define OMAP2_MCSPI_CHCONF_TRM_RX_ONLY BIT(12) -#define OMAP2_MCSPI_CHCONF_TRM_TX_ONLY BIT(13) -#define OMAP2_MCSPI_CHCONF_TRM_MASK (0x03 << 12) -#define OMAP2_MCSPI_CHCONF_DMAW BIT(14) -#define OMAP2_MCSPI_CHCONF_DMAR BIT(15) -#define OMAP2_MCSPI_CHCONF_DPE0 BIT(16) -#define OMAP2_MCSPI_CHCONF_DPE1 BIT(17) -#define OMAP2_MCSPI_CHCONF_IS BIT(18) -#define OMAP2_MCSPI_CHCONF_TURBO BIT(19) -#define OMAP2_MCSPI_CHCONF_FORCE BIT(20) - -#define OMAP2_MCSPI_CHSTAT_RXS BIT(0) -#define OMAP2_MCSPI_CHSTAT_TXS BIT(1) -#define OMAP2_MCSPI_CHSTAT_EOT BIT(2) - -#define OMAP2_MCSPI_CHCTRL_EN BIT(0) - -#define OMAP2_MCSPI_WAKEUPENABLE_WKEN BIT(0) - -/* We have 2 DMA channels per CS, one for RX and one for TX */ -struct omap2_mcspi_dma { - int dma_tx_channel; - int dma_rx_channel; - - int dma_tx_sync_dev; - int dma_rx_sync_dev; - - struct completion dma_tx_completion; - struct completion dma_rx_completion; -}; - -/* use PIO for small transfers, avoiding DMA setup/teardown overhead and - * cache operations; better heuristics consider wordsize and bitrate. - */ -#define DMA_MIN_BYTES 160 - - -struct omap2_mcspi { - struct work_struct work; - /* lock protects queue and registers */ - spinlock_t lock; - struct list_head msg_queue; - struct spi_master *master; - /* Virtual base address of the controller */ - void __iomem *base; - unsigned long phys; - /* SPI1 has 4 channels, while SPI2 has 2 */ - struct omap2_mcspi_dma *dma_channels; - struct device *dev; -}; - -struct omap2_mcspi_cs { - void __iomem *base; - unsigned long phys; - int word_len; - struct list_head node; - /* Context save and restore shadow register */ - u32 chconf0; -}; - -/* used for context save and restore, structure members to be updated whenever - * corresponding registers are modified. - */ -struct omap2_mcspi_regs { - u32 modulctrl; - u32 wakeupenable; - struct list_head cs; -}; - -static struct omap2_mcspi_regs omap2_mcspi_ctx[OMAP2_MCSPI_MAX_CTRL]; - -static struct workqueue_struct *omap2_mcspi_wq; - -#define MOD_REG_BIT(val, mask, set) do { \ - if (set) \ - val |= mask; \ - else \ - val &= ~mask; \ -} while (0) - -static inline void mcspi_write_reg(struct spi_master *master, - int idx, u32 val) -{ - struct omap2_mcspi *mcspi = spi_master_get_devdata(master); - - __raw_writel(val, mcspi->base + idx); -} - -static inline u32 mcspi_read_reg(struct spi_master *master, int idx) -{ - struct omap2_mcspi *mcspi = spi_master_get_devdata(master); - - return __raw_readl(mcspi->base + idx); -} - -static inline void mcspi_write_cs_reg(const struct spi_device *spi, - int idx, u32 val) -{ - struct omap2_mcspi_cs *cs = spi->controller_state; - - __raw_writel(val, cs->base + idx); -} - -static inline u32 mcspi_read_cs_reg(const struct spi_device *spi, int idx) -{ - struct omap2_mcspi_cs *cs = spi->controller_state; - - return __raw_readl(cs->base + idx); -} - -static inline u32 mcspi_cached_chconf0(const struct spi_device *spi) -{ - struct omap2_mcspi_cs *cs = spi->controller_state; - - return cs->chconf0; -} - -static inline void mcspi_write_chconf0(const struct spi_device *spi, u32 val) -{ - struct omap2_mcspi_cs *cs = spi->controller_state; - - cs->chconf0 = val; - mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val); - mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); -} - -static void omap2_mcspi_set_dma_req(const struct spi_device *spi, - int is_read, int enable) -{ - u32 l, rw; - - l = mcspi_cached_chconf0(spi); - - if (is_read) /* 1 is read, 0 write */ - rw = OMAP2_MCSPI_CHCONF_DMAR; - else - rw = OMAP2_MCSPI_CHCONF_DMAW; - - MOD_REG_BIT(l, rw, enable); - mcspi_write_chconf0(spi, l); -} - -static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable) -{ - u32 l; - - l = enable ? OMAP2_MCSPI_CHCTRL_EN : 0; - mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCTRL0, l); - /* Flash post-writes */ - mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCTRL0); -} - -static void omap2_mcspi_force_cs(struct spi_device *spi, int cs_active) -{ - u32 l; - - l = mcspi_cached_chconf0(spi); - MOD_REG_BIT(l, OMAP2_MCSPI_CHCONF_FORCE, cs_active); - mcspi_write_chconf0(spi, l); -} - -static void omap2_mcspi_set_master_mode(struct spi_master *master) -{ - u32 l; - - /* setup when switching from (reset default) slave mode - * to single-channel master mode - */ - l = mcspi_read_reg(master, OMAP2_MCSPI_MODULCTRL); - MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_STEST, 0); - MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_MS, 0); - MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_SINGLE, 1); - mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, l); - - omap2_mcspi_ctx[master->bus_num - 1].modulctrl = l; -} - -static void omap2_mcspi_restore_ctx(struct omap2_mcspi *mcspi) -{ - struct spi_master *spi_cntrl; - struct omap2_mcspi_cs *cs; - spi_cntrl = mcspi->master; - - /* McSPI: context restore */ - mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_MODULCTRL, - omap2_mcspi_ctx[spi_cntrl->bus_num - 1].modulctrl); - - mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_WAKEUPENABLE, - omap2_mcspi_ctx[spi_cntrl->bus_num - 1].wakeupenable); - - list_for_each_entry(cs, &omap2_mcspi_ctx[spi_cntrl->bus_num - 1].cs, - node) - __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); -} -static void omap2_mcspi_disable_clocks(struct omap2_mcspi *mcspi) -{ - pm_runtime_put_sync(mcspi->dev); -} - -static int omap2_mcspi_enable_clocks(struct omap2_mcspi *mcspi) -{ - return pm_runtime_get_sync(mcspi->dev); -} - -static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) -{ - unsigned long timeout; - - timeout = jiffies + msecs_to_jiffies(1000); - while (!(__raw_readl(reg) & bit)) { - if (time_after(jiffies, timeout)) - return -1; - cpu_relax(); - } - return 0; -} - -static unsigned -omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) -{ - struct omap2_mcspi *mcspi; - struct omap2_mcspi_cs *cs = spi->controller_state; - struct omap2_mcspi_dma *mcspi_dma; - unsigned int count, c; - unsigned long base, tx_reg, rx_reg; - int word_len, data_type, element_count; - int elements = 0; - u32 l; - u8 * rx; - const u8 * tx; - void __iomem *chstat_reg; - - mcspi = spi_master_get_devdata(spi->master); - mcspi_dma = &mcspi->dma_channels[spi->chip_select]; - l = mcspi_cached_chconf0(spi); - - chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; - - count = xfer->len; - c = count; - word_len = cs->word_len; - - base = cs->phys; - tx_reg = base + OMAP2_MCSPI_TX0; - rx_reg = base + OMAP2_MCSPI_RX0; - rx = xfer->rx_buf; - tx = xfer->tx_buf; - - if (word_len <= 8) { - data_type = OMAP_DMA_DATA_TYPE_S8; - element_count = count; - } else if (word_len <= 16) { - data_type = OMAP_DMA_DATA_TYPE_S16; - element_count = count >> 1; - } else /* word_len <= 32 */ { - data_type = OMAP_DMA_DATA_TYPE_S32; - element_count = count >> 2; - } - - if (tx != NULL) { - omap_set_dma_transfer_params(mcspi_dma->dma_tx_channel, - data_type, element_count, 1, - OMAP_DMA_SYNC_ELEMENT, - mcspi_dma->dma_tx_sync_dev, 0); - - omap_set_dma_dest_params(mcspi_dma->dma_tx_channel, 0, - OMAP_DMA_AMODE_CONSTANT, - tx_reg, 0, 0); - - omap_set_dma_src_params(mcspi_dma->dma_tx_channel, 0, - OMAP_DMA_AMODE_POST_INC, - xfer->tx_dma, 0, 0); - } - - if (rx != NULL) { - elements = element_count - 1; - if (l & OMAP2_MCSPI_CHCONF_TURBO) - elements--; - - omap_set_dma_transfer_params(mcspi_dma->dma_rx_channel, - data_type, elements, 1, - OMAP_DMA_SYNC_ELEMENT, - mcspi_dma->dma_rx_sync_dev, 1); - - omap_set_dma_src_params(mcspi_dma->dma_rx_channel, 0, - OMAP_DMA_AMODE_CONSTANT, - rx_reg, 0, 0); - - omap_set_dma_dest_params(mcspi_dma->dma_rx_channel, 0, - OMAP_DMA_AMODE_POST_INC, - xfer->rx_dma, 0, 0); - } - - if (tx != NULL) { - omap_start_dma(mcspi_dma->dma_tx_channel); - omap2_mcspi_set_dma_req(spi, 0, 1); - } - - if (rx != NULL) { - omap_start_dma(mcspi_dma->dma_rx_channel); - omap2_mcspi_set_dma_req(spi, 1, 1); - } - - if (tx != NULL) { - wait_for_completion(&mcspi_dma->dma_tx_completion); - dma_unmap_single(&spi->dev, xfer->tx_dma, count, DMA_TO_DEVICE); - - /* for TX_ONLY mode, be sure all words have shifted out */ - if (rx == NULL) { - if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_TXS) < 0) - dev_err(&spi->dev, "TXS timed out\n"); - else if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_EOT) < 0) - dev_err(&spi->dev, "EOT timed out\n"); - } - } - - if (rx != NULL) { - wait_for_completion(&mcspi_dma->dma_rx_completion); - dma_unmap_single(&spi->dev, xfer->rx_dma, count, DMA_FROM_DEVICE); - omap2_mcspi_set_enable(spi, 0); - - if (l & OMAP2_MCSPI_CHCONF_TURBO) { - - if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0) - & OMAP2_MCSPI_CHSTAT_RXS)) { - u32 w; - - w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0); - if (word_len <= 8) - ((u8 *)xfer->rx_buf)[elements++] = w; - else if (word_len <= 16) - ((u16 *)xfer->rx_buf)[elements++] = w; - else /* word_len <= 32 */ - ((u32 *)xfer->rx_buf)[elements++] = w; - } else { - dev_err(&spi->dev, - "DMA RX penultimate word empty"); - count -= (word_len <= 8) ? 2 : - (word_len <= 16) ? 4 : - /* word_len <= 32 */ 8; - omap2_mcspi_set_enable(spi, 1); - return count; - } - } - - if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0) - & OMAP2_MCSPI_CHSTAT_RXS)) { - u32 w; - - w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0); - if (word_len <= 8) - ((u8 *)xfer->rx_buf)[elements] = w; - else if (word_len <= 16) - ((u16 *)xfer->rx_buf)[elements] = w; - else /* word_len <= 32 */ - ((u32 *)xfer->rx_buf)[elements] = w; - } else { - dev_err(&spi->dev, "DMA RX last word empty"); - count -= (word_len <= 8) ? 1 : - (word_len <= 16) ? 2 : - /* word_len <= 32 */ 4; - } - omap2_mcspi_set_enable(spi, 1); - } - return count; -} - -static unsigned -omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) -{ - struct omap2_mcspi *mcspi; - struct omap2_mcspi_cs *cs = spi->controller_state; - unsigned int count, c; - u32 l; - void __iomem *base = cs->base; - void __iomem *tx_reg; - void __iomem *rx_reg; - void __iomem *chstat_reg; - int word_len; - - mcspi = spi_master_get_devdata(spi->master); - count = xfer->len; - c = count; - word_len = cs->word_len; - - l = mcspi_cached_chconf0(spi); - - /* We store the pre-calculated register addresses on stack to speed - * up the transfer loop. */ - tx_reg = base + OMAP2_MCSPI_TX0; - rx_reg = base + OMAP2_MCSPI_RX0; - chstat_reg = base + OMAP2_MCSPI_CHSTAT0; - - if (c < (word_len>>3)) - return 0; - - if (word_len <= 8) { - u8 *rx; - const u8 *tx; - - rx = xfer->rx_buf; - tx = xfer->tx_buf; - - do { - c -= 1; - if (tx != NULL) { - if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_TXS) < 0) { - dev_err(&spi->dev, "TXS timed out\n"); - goto out; - } - dev_vdbg(&spi->dev, "write-%d %02x\n", - word_len, *tx); - __raw_writel(*tx++, tx_reg); - } - if (rx != NULL) { - if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_RXS) < 0) { - dev_err(&spi->dev, "RXS timed out\n"); - goto out; - } - - if (c == 1 && tx == NULL && - (l & OMAP2_MCSPI_CHCONF_TURBO)) { - omap2_mcspi_set_enable(spi, 0); - *rx++ = __raw_readl(rx_reg); - dev_vdbg(&spi->dev, "read-%d %02x\n", - word_len, *(rx - 1)); - if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_RXS) < 0) { - dev_err(&spi->dev, - "RXS timed out\n"); - goto out; - } - c = 0; - } else if (c == 0 && tx == NULL) { - omap2_mcspi_set_enable(spi, 0); - } - - *rx++ = __raw_readl(rx_reg); - dev_vdbg(&spi->dev, "read-%d %02x\n", - word_len, *(rx - 1)); - } - } while (c); - } else if (word_len <= 16) { - u16 *rx; - const u16 *tx; - - rx = xfer->rx_buf; - tx = xfer->tx_buf; - do { - c -= 2; - if (tx != NULL) { - if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_TXS) < 0) { - dev_err(&spi->dev, "TXS timed out\n"); - goto out; - } - dev_vdbg(&spi->dev, "write-%d %04x\n", - word_len, *tx); - __raw_writel(*tx++, tx_reg); - } - if (rx != NULL) { - if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_RXS) < 0) { - dev_err(&spi->dev, "RXS timed out\n"); - goto out; - } - - if (c == 2 && tx == NULL && - (l & OMAP2_MCSPI_CHCONF_TURBO)) { - omap2_mcspi_set_enable(spi, 0); - *rx++ = __raw_readl(rx_reg); - dev_vdbg(&spi->dev, "read-%d %04x\n", - word_len, *(rx - 1)); - if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_RXS) < 0) { - dev_err(&spi->dev, - "RXS timed out\n"); - goto out; - } - c = 0; - } else if (c == 0 && tx == NULL) { - omap2_mcspi_set_enable(spi, 0); - } - - *rx++ = __raw_readl(rx_reg); - dev_vdbg(&spi->dev, "read-%d %04x\n", - word_len, *(rx - 1)); - } - } while (c >= 2); - } else if (word_len <= 32) { - u32 *rx; - const u32 *tx; - - rx = xfer->rx_buf; - tx = xfer->tx_buf; - do { - c -= 4; - if (tx != NULL) { - if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_TXS) < 0) { - dev_err(&spi->dev, "TXS timed out\n"); - goto out; - } - dev_vdbg(&spi->dev, "write-%d %08x\n", - word_len, *tx); - __raw_writel(*tx++, tx_reg); - } - if (rx != NULL) { - if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_RXS) < 0) { - dev_err(&spi->dev, "RXS timed out\n"); - goto out; - } - - if (c == 4 && tx == NULL && - (l & OMAP2_MCSPI_CHCONF_TURBO)) { - omap2_mcspi_set_enable(spi, 0); - *rx++ = __raw_readl(rx_reg); - dev_vdbg(&spi->dev, "read-%d %08x\n", - word_len, *(rx - 1)); - if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_RXS) < 0) { - dev_err(&spi->dev, - "RXS timed out\n"); - goto out; - } - c = 0; - } else if (c == 0 && tx == NULL) { - omap2_mcspi_set_enable(spi, 0); - } - - *rx++ = __raw_readl(rx_reg); - dev_vdbg(&spi->dev, "read-%d %08x\n", - word_len, *(rx - 1)); - } - } while (c >= 4); - } - - /* for TX_ONLY mode, be sure all words have shifted out */ - if (xfer->rx_buf == NULL) { - if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_TXS) < 0) { - dev_err(&spi->dev, "TXS timed out\n"); - } else if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_EOT) < 0) - dev_err(&spi->dev, "EOT timed out\n"); - - /* disable chan to purge rx datas received in TX_ONLY transfer, - * otherwise these rx datas will affect the direct following - * RX_ONLY transfer. - */ - omap2_mcspi_set_enable(spi, 0); - } -out: - omap2_mcspi_set_enable(spi, 1); - return count - c; -} - -static u32 omap2_mcspi_calc_divisor(u32 speed_hz) -{ - u32 div; - - for (div = 0; div < 15; div++) - if (speed_hz >= (OMAP2_MCSPI_MAX_FREQ >> div)) - return div; - - return 15; -} - -/* called only when no transfer is active to this device */ -static int omap2_mcspi_setup_transfer(struct spi_device *spi, - struct spi_transfer *t) -{ - struct omap2_mcspi_cs *cs = spi->controller_state; - struct omap2_mcspi *mcspi; - struct spi_master *spi_cntrl; - u32 l = 0, div = 0; - u8 word_len = spi->bits_per_word; - u32 speed_hz = spi->max_speed_hz; - - mcspi = spi_master_get_devdata(spi->master); - spi_cntrl = mcspi->master; - - if (t != NULL && t->bits_per_word) - word_len = t->bits_per_word; - - cs->word_len = word_len; - - if (t && t->speed_hz) - speed_hz = t->speed_hz; - - speed_hz = min_t(u32, speed_hz, OMAP2_MCSPI_MAX_FREQ); - div = omap2_mcspi_calc_divisor(speed_hz); - - l = mcspi_cached_chconf0(spi); - - /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS - * REVISIT: this controller could support SPI_3WIRE mode. - */ - l &= ~(OMAP2_MCSPI_CHCONF_IS|OMAP2_MCSPI_CHCONF_DPE1); - l |= OMAP2_MCSPI_CHCONF_DPE0; - - /* wordlength */ - l &= ~OMAP2_MCSPI_CHCONF_WL_MASK; - l |= (word_len - 1) << 7; - - /* set chipselect polarity; manage with FORCE */ - if (!(spi->mode & SPI_CS_HIGH)) - l |= OMAP2_MCSPI_CHCONF_EPOL; /* active-low; normal */ - else - l &= ~OMAP2_MCSPI_CHCONF_EPOL; - - /* set clock divisor */ - l &= ~OMAP2_MCSPI_CHCONF_CLKD_MASK; - l |= div << 2; - - /* set SPI mode 0..3 */ - if (spi->mode & SPI_CPOL) - l |= OMAP2_MCSPI_CHCONF_POL; - else - l &= ~OMAP2_MCSPI_CHCONF_POL; - if (spi->mode & SPI_CPHA) - l |= OMAP2_MCSPI_CHCONF_PHA; - else - l &= ~OMAP2_MCSPI_CHCONF_PHA; - - mcspi_write_chconf0(spi, l); - - dev_dbg(&spi->dev, "setup: speed %d, sample %s edge, clk %s\n", - OMAP2_MCSPI_MAX_FREQ >> div, - (spi->mode & SPI_CPHA) ? "trailing" : "leading", - (spi->mode & SPI_CPOL) ? "inverted" : "normal"); - - return 0; -} - -static void omap2_mcspi_dma_rx_callback(int lch, u16 ch_status, void *data) -{ - struct spi_device *spi = data; - struct omap2_mcspi *mcspi; - struct omap2_mcspi_dma *mcspi_dma; - - mcspi = spi_master_get_devdata(spi->master); - mcspi_dma = &(mcspi->dma_channels[spi->chip_select]); - - complete(&mcspi_dma->dma_rx_completion); - - /* We must disable the DMA RX request */ - omap2_mcspi_set_dma_req(spi, 1, 0); -} - -static void omap2_mcspi_dma_tx_callback(int lch, u16 ch_status, void *data) -{ - struct spi_device *spi = data; - struct omap2_mcspi *mcspi; - struct omap2_mcspi_dma *mcspi_dma; - - mcspi = spi_master_get_devdata(spi->master); - mcspi_dma = &(mcspi->dma_channels[spi->chip_select]); - - complete(&mcspi_dma->dma_tx_completion); - - /* We must disable the DMA TX request */ - omap2_mcspi_set_dma_req(spi, 0, 0); -} - -static int omap2_mcspi_request_dma(struct spi_device *spi) -{ - struct spi_master *master = spi->master; - struct omap2_mcspi *mcspi; - struct omap2_mcspi_dma *mcspi_dma; - - mcspi = spi_master_get_devdata(master); - mcspi_dma = mcspi->dma_channels + spi->chip_select; - - if (omap_request_dma(mcspi_dma->dma_rx_sync_dev, "McSPI RX", - omap2_mcspi_dma_rx_callback, spi, - &mcspi_dma->dma_rx_channel)) { - dev_err(&spi->dev, "no RX DMA channel for McSPI\n"); - return -EAGAIN; - } - - if (omap_request_dma(mcspi_dma->dma_tx_sync_dev, "McSPI TX", - omap2_mcspi_dma_tx_callback, spi, - &mcspi_dma->dma_tx_channel)) { - omap_free_dma(mcspi_dma->dma_rx_channel); - mcspi_dma->dma_rx_channel = -1; - dev_err(&spi->dev, "no TX DMA channel for McSPI\n"); - return -EAGAIN; - } - - init_completion(&mcspi_dma->dma_rx_completion); - init_completion(&mcspi_dma->dma_tx_completion); - - return 0; -} - -static int omap2_mcspi_setup(struct spi_device *spi) -{ - int ret; - struct omap2_mcspi *mcspi; - struct omap2_mcspi_dma *mcspi_dma; - struct omap2_mcspi_cs *cs = spi->controller_state; - - if (spi->bits_per_word < 4 || spi->bits_per_word > 32) { - dev_dbg(&spi->dev, "setup: unsupported %d bit words\n", - spi->bits_per_word); - return -EINVAL; - } - - mcspi = spi_master_get_devdata(spi->master); - mcspi_dma = &mcspi->dma_channels[spi->chip_select]; - - if (!cs) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); - if (!cs) - return -ENOMEM; - cs->base = mcspi->base + spi->chip_select * 0x14; - cs->phys = mcspi->phys + spi->chip_select * 0x14; - cs->chconf0 = 0; - spi->controller_state = cs; - /* Link this to context save list */ - list_add_tail(&cs->node, - &omap2_mcspi_ctx[mcspi->master->bus_num - 1].cs); - } - - if (mcspi_dma->dma_rx_channel == -1 - || mcspi_dma->dma_tx_channel == -1) { - ret = omap2_mcspi_request_dma(spi); - if (ret < 0) - return ret; - } - - ret = omap2_mcspi_enable_clocks(mcspi); - if (ret < 0) - return ret; - - ret = omap2_mcspi_setup_transfer(spi, NULL); - omap2_mcspi_disable_clocks(mcspi); - - return ret; -} - -static void omap2_mcspi_cleanup(struct spi_device *spi) -{ - struct omap2_mcspi *mcspi; - struct omap2_mcspi_dma *mcspi_dma; - struct omap2_mcspi_cs *cs; - - mcspi = spi_master_get_devdata(spi->master); - - if (spi->controller_state) { - /* Unlink controller state from context save list */ - cs = spi->controller_state; - list_del(&cs->node); - - kfree(spi->controller_state); - } - - if (spi->chip_select < spi->master->num_chipselect) { - mcspi_dma = &mcspi->dma_channels[spi->chip_select]; - - if (mcspi_dma->dma_rx_channel != -1) { - omap_free_dma(mcspi_dma->dma_rx_channel); - mcspi_dma->dma_rx_channel = -1; - } - if (mcspi_dma->dma_tx_channel != -1) { - omap_free_dma(mcspi_dma->dma_tx_channel); - mcspi_dma->dma_tx_channel = -1; - } - } -} - -static void omap2_mcspi_work(struct work_struct *work) -{ - struct omap2_mcspi *mcspi; - - mcspi = container_of(work, struct omap2_mcspi, work); - - if (omap2_mcspi_enable_clocks(mcspi) < 0) - return; - - spin_lock_irq(&mcspi->lock); - - /* We only enable one channel at a time -- the one whose message is - * at the head of the queue -- although this controller would gladly - * arbitrate among multiple channels. This corresponds to "single - * channel" master mode. As a side effect, we need to manage the - * chipselect with the FORCE bit ... CS != channel enable. - */ - while (!list_empty(&mcspi->msg_queue)) { - struct spi_message *m; - struct spi_device *spi; - struct spi_transfer *t = NULL; - int cs_active = 0; - struct omap2_mcspi_cs *cs; - struct omap2_mcspi_device_config *cd; - int par_override = 0; - int status = 0; - u32 chconf; - - m = container_of(mcspi->msg_queue.next, struct spi_message, - queue); - - list_del_init(&m->queue); - spin_unlock_irq(&mcspi->lock); - - spi = m->spi; - cs = spi->controller_state; - cd = spi->controller_data; - - omap2_mcspi_set_enable(spi, 1); - list_for_each_entry(t, &m->transfers, transfer_list) { - if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { - status = -EINVAL; - break; - } - if (par_override || t->speed_hz || t->bits_per_word) { - par_override = 1; - status = omap2_mcspi_setup_transfer(spi, t); - if (status < 0) - break; - if (!t->speed_hz && !t->bits_per_word) - par_override = 0; - } - - if (!cs_active) { - omap2_mcspi_force_cs(spi, 1); - cs_active = 1; - } - - chconf = mcspi_cached_chconf0(spi); - chconf &= ~OMAP2_MCSPI_CHCONF_TRM_MASK; - chconf &= ~OMAP2_MCSPI_CHCONF_TURBO; - - if (t->tx_buf == NULL) - chconf |= OMAP2_MCSPI_CHCONF_TRM_RX_ONLY; - else if (t->rx_buf == NULL) - chconf |= OMAP2_MCSPI_CHCONF_TRM_TX_ONLY; - - if (cd && cd->turbo_mode && t->tx_buf == NULL) { - /* Turbo mode is for more than one word */ - if (t->len > ((cs->word_len + 7) >> 3)) - chconf |= OMAP2_MCSPI_CHCONF_TURBO; - } - - mcspi_write_chconf0(spi, chconf); - - if (t->len) { - unsigned count; - - /* RX_ONLY mode needs dummy data in TX reg */ - if (t->tx_buf == NULL) - __raw_writel(0, cs->base - + OMAP2_MCSPI_TX0); - - if (m->is_dma_mapped || t->len >= DMA_MIN_BYTES) - count = omap2_mcspi_txrx_dma(spi, t); - else - count = omap2_mcspi_txrx_pio(spi, t); - m->actual_length += count; - - if (count != t->len) { - status = -EIO; - break; - } - } - - if (t->delay_usecs) - udelay(t->delay_usecs); - - /* ignore the "leave it on after last xfer" hint */ - if (t->cs_change) { - omap2_mcspi_force_cs(spi, 0); - cs_active = 0; - } - } - - /* Restore defaults if they were overriden */ - if (par_override) { - par_override = 0; - status = omap2_mcspi_setup_transfer(spi, NULL); - } - - if (cs_active) - omap2_mcspi_force_cs(spi, 0); - - omap2_mcspi_set_enable(spi, 0); - - m->status = status; - m->complete(m->context); - - spin_lock_irq(&mcspi->lock); - } - - spin_unlock_irq(&mcspi->lock); - - omap2_mcspi_disable_clocks(mcspi); -} - -static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m) -{ - struct omap2_mcspi *mcspi; - unsigned long flags; - struct spi_transfer *t; - - m->actual_length = 0; - m->status = 0; - - /* reject invalid messages and transfers */ - if (list_empty(&m->transfers) || !m->complete) - return -EINVAL; - list_for_each_entry(t, &m->transfers, transfer_list) { - const void *tx_buf = t->tx_buf; - void *rx_buf = t->rx_buf; - unsigned len = t->len; - - if (t->speed_hz > OMAP2_MCSPI_MAX_FREQ - || (len && !(rx_buf || tx_buf)) - || (t->bits_per_word && - ( t->bits_per_word < 4 - || t->bits_per_word > 32))) { - dev_dbg(&spi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n", - t->speed_hz, - len, - tx_buf ? "tx" : "", - rx_buf ? "rx" : "", - t->bits_per_word); - return -EINVAL; - } - if (t->speed_hz && t->speed_hz < (OMAP2_MCSPI_MAX_FREQ >> 15)) { - dev_dbg(&spi->dev, "speed_hz %d below minimum %d Hz\n", - t->speed_hz, - OMAP2_MCSPI_MAX_FREQ >> 15); - return -EINVAL; - } - - if (m->is_dma_mapped || len < DMA_MIN_BYTES) - continue; - - if (tx_buf != NULL) { - t->tx_dma = dma_map_single(&spi->dev, (void *) tx_buf, - len, DMA_TO_DEVICE); - if (dma_mapping_error(&spi->dev, t->tx_dma)) { - dev_dbg(&spi->dev, "dma %cX %d bytes error\n", - 'T', len); - return -EINVAL; - } - } - if (rx_buf != NULL) { - t->rx_dma = dma_map_single(&spi->dev, rx_buf, t->len, - DMA_FROM_DEVICE); - if (dma_mapping_error(&spi->dev, t->rx_dma)) { - dev_dbg(&spi->dev, "dma %cX %d bytes error\n", - 'R', len); - if (tx_buf != NULL) - dma_unmap_single(&spi->dev, t->tx_dma, - len, DMA_TO_DEVICE); - return -EINVAL; - } - } - } - - mcspi = spi_master_get_devdata(spi->master); - - spin_lock_irqsave(&mcspi->lock, flags); - list_add_tail(&m->queue, &mcspi->msg_queue); - queue_work(omap2_mcspi_wq, &mcspi->work); - spin_unlock_irqrestore(&mcspi->lock, flags); - - return 0; -} - -static int __init omap2_mcspi_master_setup(struct omap2_mcspi *mcspi) -{ - struct spi_master *master = mcspi->master; - u32 tmp; - int ret = 0; - - ret = omap2_mcspi_enable_clocks(mcspi); - if (ret < 0) - return ret; - - tmp = OMAP2_MCSPI_WAKEUPENABLE_WKEN; - mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE, tmp); - omap2_mcspi_ctx[master->bus_num - 1].wakeupenable = tmp; - - omap2_mcspi_set_master_mode(master); - omap2_mcspi_disable_clocks(mcspi); - return 0; -} - -static int omap_mcspi_runtime_resume(struct device *dev) -{ - struct omap2_mcspi *mcspi; - struct spi_master *master; - - master = dev_get_drvdata(dev); - mcspi = spi_master_get_devdata(master); - omap2_mcspi_restore_ctx(mcspi); - - return 0; -} - - -static int __init omap2_mcspi_probe(struct platform_device *pdev) -{ - struct spi_master *master; - struct omap2_mcspi_platform_config *pdata = pdev->dev.platform_data; - struct omap2_mcspi *mcspi; - struct resource *r; - int status = 0, i; - - master = spi_alloc_master(&pdev->dev, sizeof *mcspi); - if (master == NULL) { - dev_dbg(&pdev->dev, "master allocation failed\n"); - return -ENOMEM; - } - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - - if (pdev->id != -1) - master->bus_num = pdev->id; - - master->setup = omap2_mcspi_setup; - master->transfer = omap2_mcspi_transfer; - master->cleanup = omap2_mcspi_cleanup; - master->num_chipselect = pdata->num_cs; - - dev_set_drvdata(&pdev->dev, master); - - mcspi = spi_master_get_devdata(master); - mcspi->master = master; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - status = -ENODEV; - goto err1; - } - if (!request_mem_region(r->start, (r->end - r->start) + 1, - dev_name(&pdev->dev))) { - status = -EBUSY; - goto err1; - } - - r->start += pdata->regs_offset; - r->end += pdata->regs_offset; - mcspi->phys = r->start; - mcspi->base = ioremap(r->start, r->end - r->start + 1); - if (!mcspi->base) { - dev_dbg(&pdev->dev, "can't ioremap MCSPI\n"); - status = -ENOMEM; - goto err2; - } - - mcspi->dev = &pdev->dev; - INIT_WORK(&mcspi->work, omap2_mcspi_work); - - spin_lock_init(&mcspi->lock); - INIT_LIST_HEAD(&mcspi->msg_queue); - INIT_LIST_HEAD(&omap2_mcspi_ctx[master->bus_num - 1].cs); - - mcspi->dma_channels = kcalloc(master->num_chipselect, - sizeof(struct omap2_mcspi_dma), - GFP_KERNEL); - - if (mcspi->dma_channels == NULL) - goto err2; - - for (i = 0; i < master->num_chipselect; i++) { - char dma_ch_name[14]; - struct resource *dma_res; - - sprintf(dma_ch_name, "rx%d", i); - dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA, - dma_ch_name); - if (!dma_res) { - dev_dbg(&pdev->dev, "cannot get DMA RX channel\n"); - status = -ENODEV; - break; - } - - mcspi->dma_channels[i].dma_rx_channel = -1; - mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start; - sprintf(dma_ch_name, "tx%d", i); - dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA, - dma_ch_name); - if (!dma_res) { - dev_dbg(&pdev->dev, "cannot get DMA TX channel\n"); - status = -ENODEV; - break; - } - - mcspi->dma_channels[i].dma_tx_channel = -1; - mcspi->dma_channels[i].dma_tx_sync_dev = dma_res->start; - } - - pm_runtime_enable(&pdev->dev); - - if (status || omap2_mcspi_master_setup(mcspi) < 0) - goto err3; - - status = spi_register_master(master); - if (status < 0) - goto err4; - - return status; - -err4: - spi_master_put(master); -err3: - kfree(mcspi->dma_channels); -err2: - release_mem_region(r->start, (r->end - r->start) + 1); - iounmap(mcspi->base); -err1: - return status; -} - -static int __exit omap2_mcspi_remove(struct platform_device *pdev) -{ - struct spi_master *master; - struct omap2_mcspi *mcspi; - struct omap2_mcspi_dma *dma_channels; - struct resource *r; - void __iomem *base; - - master = dev_get_drvdata(&pdev->dev); - mcspi = spi_master_get_devdata(master); - dma_channels = mcspi->dma_channels; - - omap2_mcspi_disable_clocks(mcspi); - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, (r->end - r->start) + 1); - - base = mcspi->base; - spi_unregister_master(master); - iounmap(base); - kfree(dma_channels); - - return 0; -} - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:omap2_mcspi"); - -#ifdef CONFIG_SUSPEND -/* - * When SPI wake up from off-mode, CS is in activate state. If it was in - * unactive state when driver was suspend, then force it to unactive state at - * wake up. - */ -static int omap2_mcspi_resume(struct device *dev) -{ - struct spi_master *master = dev_get_drvdata(dev); - struct omap2_mcspi *mcspi = spi_master_get_devdata(master); - struct omap2_mcspi_cs *cs; - - omap2_mcspi_enable_clocks(mcspi); - list_for_each_entry(cs, &omap2_mcspi_ctx[master->bus_num - 1].cs, - node) { - if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) { - - /* - * We need to toggle CS state for OMAP take this - * change in account. - */ - MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 1); - __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); - MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 0); - __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); - } - } - omap2_mcspi_disable_clocks(mcspi); - return 0; -} -#else -#define omap2_mcspi_resume NULL -#endif - -static const struct dev_pm_ops omap2_mcspi_pm_ops = { - .resume = omap2_mcspi_resume, - .runtime_resume = omap_mcspi_runtime_resume, -}; - -static struct platform_driver omap2_mcspi_driver = { - .driver = { - .name = "omap2_mcspi", - .owner = THIS_MODULE, - .pm = &omap2_mcspi_pm_ops - }, - .remove = __exit_p(omap2_mcspi_remove), -}; - - -static int __init omap2_mcspi_init(void) -{ - omap2_mcspi_wq = create_singlethread_workqueue( - omap2_mcspi_driver.driver.name); - if (omap2_mcspi_wq == NULL) - return -1; - return platform_driver_probe(&omap2_mcspi_driver, omap2_mcspi_probe); -} -subsys_initcall(omap2_mcspi_init); - -static void __exit omap2_mcspi_exit(void) -{ - platform_driver_unregister(&omap2_mcspi_driver); - - destroy_workqueue(omap2_mcspi_wq); -} -module_exit(omap2_mcspi_exit); - -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/omap_spi_100k.c b/drivers/spi/omap_spi_100k.c deleted file mode 100644 index 9bd1c92ad96e..000000000000 --- a/drivers/spi/omap_spi_100k.c +++ /dev/null @@ -1,637 +0,0 @@ -/* - * OMAP7xx SPI 100k controller driver - * Author: Fabrice Crohas - * from original omap1_mcspi driver - * - * Copyright (C) 2005, 2006 Nokia Corporation - * Author: Samuel Ortiz and - * Juha Yrj�l� - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include - -#define OMAP1_SPI100K_MAX_FREQ 48000000 - -#define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12) - -#define SPI_SETUP1 0x00 -#define SPI_SETUP2 0x02 -#define SPI_CTRL 0x04 -#define SPI_STATUS 0x06 -#define SPI_TX_LSB 0x08 -#define SPI_TX_MSB 0x0a -#define SPI_RX_LSB 0x0c -#define SPI_RX_MSB 0x0e - -#define SPI_SETUP1_INT_READ_ENABLE (1UL << 5) -#define SPI_SETUP1_INT_WRITE_ENABLE (1UL << 4) -#define SPI_SETUP1_CLOCK_DIVISOR(x) ((x) << 1) -#define SPI_SETUP1_CLOCK_ENABLE (1UL << 0) - -#define SPI_SETUP2_ACTIVE_EDGE_FALLING (0UL << 0) -#define SPI_SETUP2_ACTIVE_EDGE_RISING (1UL << 0) -#define SPI_SETUP2_NEGATIVE_LEVEL (0UL << 5) -#define SPI_SETUP2_POSITIVE_LEVEL (1UL << 5) -#define SPI_SETUP2_LEVEL_TRIGGER (0UL << 10) -#define SPI_SETUP2_EDGE_TRIGGER (1UL << 10) - -#define SPI_CTRL_SEN(x) ((x) << 7) -#define SPI_CTRL_WORD_SIZE(x) (((x) - 1) << 2) -#define SPI_CTRL_WR (1UL << 1) -#define SPI_CTRL_RD (1UL << 0) - -#define SPI_STATUS_WE (1UL << 1) -#define SPI_STATUS_RD (1UL << 0) - -#define WRITE 0 -#define READ 1 - - -/* use PIO for small transfers, avoiding DMA setup/teardown overhead and - * cache operations; better heuristics consider wordsize and bitrate. - */ -#define DMA_MIN_BYTES 8 - -#define SPI_RUNNING 0 -#define SPI_SHUTDOWN 1 - -struct omap1_spi100k { - struct work_struct work; - - /* lock protects queue and registers */ - spinlock_t lock; - struct list_head msg_queue; - struct spi_master *master; - struct clk *ick; - struct clk *fck; - - /* Virtual base address of the controller */ - void __iomem *base; - - /* State of the SPI */ - unsigned int state; -}; - -struct omap1_spi100k_cs { - void __iomem *base; - int word_len; -}; - -static struct workqueue_struct *omap1_spi100k_wq; - -#define MOD_REG_BIT(val, mask, set) do { \ - if (set) \ - val |= mask; \ - else \ - val &= ~mask; \ -} while (0) - -static void spi100k_enable_clock(struct spi_master *master) -{ - unsigned int val; - struct omap1_spi100k *spi100k = spi_master_get_devdata(master); - - /* enable SPI */ - val = readw(spi100k->base + SPI_SETUP1); - val |= SPI_SETUP1_CLOCK_ENABLE; - writew(val, spi100k->base + SPI_SETUP1); -} - -static void spi100k_disable_clock(struct spi_master *master) -{ - unsigned int val; - struct omap1_spi100k *spi100k = spi_master_get_devdata(master); - - /* disable SPI */ - val = readw(spi100k->base + SPI_SETUP1); - val &= ~SPI_SETUP1_CLOCK_ENABLE; - writew(val, spi100k->base + SPI_SETUP1); -} - -static void spi100k_write_data(struct spi_master *master, int len, int data) -{ - struct omap1_spi100k *spi100k = spi_master_get_devdata(master); - - /* write 16-bit word, shifting 8-bit data if necessary */ - if (len <= 8) { - data <<= 8; - len = 16; - } - - spi100k_enable_clock(master); - writew( data , spi100k->base + SPI_TX_MSB); - - writew(SPI_CTRL_SEN(0) | - SPI_CTRL_WORD_SIZE(len) | - SPI_CTRL_WR, - spi100k->base + SPI_CTRL); - - /* Wait for bit ack send change */ - while((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_WE) != SPI_STATUS_WE); - udelay(1000); - - spi100k_disable_clock(master); -} - -static int spi100k_read_data(struct spi_master *master, int len) -{ - int dataH,dataL; - struct omap1_spi100k *spi100k = spi_master_get_devdata(master); - - /* Always do at least 16 bits */ - if (len <= 8) - len = 16; - - spi100k_enable_clock(master); - writew(SPI_CTRL_SEN(0) | - SPI_CTRL_WORD_SIZE(len) | - SPI_CTRL_RD, - spi100k->base + SPI_CTRL); - - while((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_RD) != SPI_STATUS_RD); - udelay(1000); - - dataL = readw(spi100k->base + SPI_RX_LSB); - dataH = readw(spi100k->base + SPI_RX_MSB); - spi100k_disable_clock(master); - - return dataL; -} - -static void spi100k_open(struct spi_master *master) -{ - /* get control of SPI */ - struct omap1_spi100k *spi100k = spi_master_get_devdata(master); - - writew(SPI_SETUP1_INT_READ_ENABLE | - SPI_SETUP1_INT_WRITE_ENABLE | - SPI_SETUP1_CLOCK_DIVISOR(0), spi100k->base + SPI_SETUP1); - - /* configure clock and interrupts */ - writew(SPI_SETUP2_ACTIVE_EDGE_FALLING | - SPI_SETUP2_NEGATIVE_LEVEL | - SPI_SETUP2_LEVEL_TRIGGER, spi100k->base + SPI_SETUP2); -} - -static void omap1_spi100k_force_cs(struct omap1_spi100k *spi100k, int enable) -{ - if (enable) - writew(0x05fc, spi100k->base + SPI_CTRL); - else - writew(0x05fd, spi100k->base + SPI_CTRL); -} - -static unsigned -omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) -{ - struct omap1_spi100k *spi100k; - struct omap1_spi100k_cs *cs = spi->controller_state; - unsigned int count, c; - int word_len; - - spi100k = spi_master_get_devdata(spi->master); - count = xfer->len; - c = count; - word_len = cs->word_len; - - if (word_len <= 8) { - u8 *rx; - const u8 *tx; - - rx = xfer->rx_buf; - tx = xfer->tx_buf; - do { - c-=1; - if (xfer->tx_buf != NULL) - spi100k_write_data(spi->master, word_len, *tx++); - if (xfer->rx_buf != NULL) - *rx++ = spi100k_read_data(spi->master, word_len); - } while(c); - } else if (word_len <= 16) { - u16 *rx; - const u16 *tx; - - rx = xfer->rx_buf; - tx = xfer->tx_buf; - do { - c-=2; - if (xfer->tx_buf != NULL) - spi100k_write_data(spi->master,word_len, *tx++); - if (xfer->rx_buf != NULL) - *rx++ = spi100k_read_data(spi->master,word_len); - } while(c); - } else if (word_len <= 32) { - u32 *rx; - const u32 *tx; - - rx = xfer->rx_buf; - tx = xfer->tx_buf; - do { - c-=4; - if (xfer->tx_buf != NULL) - spi100k_write_data(spi->master,word_len, *tx); - if (xfer->rx_buf != NULL) - *rx = spi100k_read_data(spi->master,word_len); - } while(c); - } - return count - c; -} - -/* called only when no transfer is active to this device */ -static int omap1_spi100k_setup_transfer(struct spi_device *spi, - struct spi_transfer *t) -{ - struct omap1_spi100k *spi100k = spi_master_get_devdata(spi->master); - struct omap1_spi100k_cs *cs = spi->controller_state; - u8 word_len = spi->bits_per_word; - - if (t != NULL && t->bits_per_word) - word_len = t->bits_per_word; - if (!word_len) - word_len = 8; - - if (spi->bits_per_word > 32) - return -EINVAL; - cs->word_len = word_len; - - /* SPI init before transfer */ - writew(0x3e , spi100k->base + SPI_SETUP1); - writew(0x00 , spi100k->base + SPI_STATUS); - writew(0x3e , spi100k->base + SPI_CTRL); - - return 0; -} - -/* the spi->mode bits understood by this driver: */ -#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH) - -static int omap1_spi100k_setup(struct spi_device *spi) -{ - int ret; - struct omap1_spi100k *spi100k; - struct omap1_spi100k_cs *cs = spi->controller_state; - - if (spi->bits_per_word < 4 || spi->bits_per_word > 32) { - dev_dbg(&spi->dev, "setup: unsupported %d bit words\n", - spi->bits_per_word); - return -EINVAL; - } - - spi100k = spi_master_get_devdata(spi->master); - - if (!cs) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); - if (!cs) - return -ENOMEM; - cs->base = spi100k->base + spi->chip_select * 0x14; - spi->controller_state = cs; - } - - spi100k_open(spi->master); - - clk_enable(spi100k->ick); - clk_enable(spi100k->fck); - - ret = omap1_spi100k_setup_transfer(spi, NULL); - - clk_disable(spi100k->ick); - clk_disable(spi100k->fck); - - return ret; -} - -static void omap1_spi100k_work(struct work_struct *work) -{ - struct omap1_spi100k *spi100k; - int status = 0; - - spi100k = container_of(work, struct omap1_spi100k, work); - spin_lock_irq(&spi100k->lock); - - clk_enable(spi100k->ick); - clk_enable(spi100k->fck); - - /* We only enable one channel at a time -- the one whose message is - * at the head of the queue -- although this controller would gladly - * arbitrate among multiple channels. This corresponds to "single - * channel" master mode. As a side effect, we need to manage the - * chipselect with the FORCE bit ... CS != channel enable. - */ - while (!list_empty(&spi100k->msg_queue)) { - struct spi_message *m; - struct spi_device *spi; - struct spi_transfer *t = NULL; - int cs_active = 0; - struct omap1_spi100k_cs *cs; - int par_override = 0; - - m = container_of(spi100k->msg_queue.next, struct spi_message, - queue); - - list_del_init(&m->queue); - spin_unlock_irq(&spi100k->lock); - - spi = m->spi; - cs = spi->controller_state; - - list_for_each_entry(t, &m->transfers, transfer_list) { - if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { - status = -EINVAL; - break; - } - if (par_override || t->speed_hz || t->bits_per_word) { - par_override = 1; - status = omap1_spi100k_setup_transfer(spi, t); - if (status < 0) - break; - if (!t->speed_hz && !t->bits_per_word) - par_override = 0; - } - - if (!cs_active) { - omap1_spi100k_force_cs(spi100k, 1); - cs_active = 1; - } - - if (t->len) { - unsigned count; - - count = omap1_spi100k_txrx_pio(spi, t); - m->actual_length += count; - - if (count != t->len) { - status = -EIO; - break; - } - } - - if (t->delay_usecs) - udelay(t->delay_usecs); - - /* ignore the "leave it on after last xfer" hint */ - - if (t->cs_change) { - omap1_spi100k_force_cs(spi100k, 0); - cs_active = 0; - } - } - - /* Restore defaults if they were overriden */ - if (par_override) { - par_override = 0; - status = omap1_spi100k_setup_transfer(spi, NULL); - } - - if (cs_active) - omap1_spi100k_force_cs(spi100k, 0); - - m->status = status; - m->complete(m->context); - - spin_lock_irq(&spi100k->lock); - } - - clk_disable(spi100k->ick); - clk_disable(spi100k->fck); - spin_unlock_irq(&spi100k->lock); - - if (status < 0) - printk(KERN_WARNING "spi transfer failed with %d\n", status); -} - -static int omap1_spi100k_transfer(struct spi_device *spi, struct spi_message *m) -{ - struct omap1_spi100k *spi100k; - unsigned long flags; - struct spi_transfer *t; - - m->actual_length = 0; - m->status = -EINPROGRESS; - - spi100k = spi_master_get_devdata(spi->master); - - /* Don't accept new work if we're shutting down */ - if (spi100k->state == SPI_SHUTDOWN) - return -ESHUTDOWN; - - /* reject invalid messages and transfers */ - if (list_empty(&m->transfers) || !m->complete) - return -EINVAL; - - list_for_each_entry(t, &m->transfers, transfer_list) { - const void *tx_buf = t->tx_buf; - void *rx_buf = t->rx_buf; - unsigned len = t->len; - - if (t->speed_hz > OMAP1_SPI100K_MAX_FREQ - || (len && !(rx_buf || tx_buf)) - || (t->bits_per_word && - ( t->bits_per_word < 4 - || t->bits_per_word > 32))) { - dev_dbg(&spi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n", - t->speed_hz, - len, - tx_buf ? "tx" : "", - rx_buf ? "rx" : "", - t->bits_per_word); - return -EINVAL; - } - - if (t->speed_hz && t->speed_hz < OMAP1_SPI100K_MAX_FREQ/(1<<16)) { - dev_dbg(&spi->dev, "%d Hz max exceeds %d\n", - t->speed_hz, - OMAP1_SPI100K_MAX_FREQ/(1<<16)); - return -EINVAL; - } - - } - - spin_lock_irqsave(&spi100k->lock, flags); - list_add_tail(&m->queue, &spi100k->msg_queue); - queue_work(omap1_spi100k_wq, &spi100k->work); - spin_unlock_irqrestore(&spi100k->lock, flags); - - return 0; -} - -static int __init omap1_spi100k_reset(struct omap1_spi100k *spi100k) -{ - return 0; -} - -static int __devinit omap1_spi100k_probe(struct platform_device *pdev) -{ - struct spi_master *master; - struct omap1_spi100k *spi100k; - int status = 0; - - if (!pdev->id) - return -EINVAL; - - master = spi_alloc_master(&pdev->dev, sizeof *spi100k); - if (master == NULL) { - dev_dbg(&pdev->dev, "master allocation failed\n"); - return -ENOMEM; - } - - if (pdev->id != -1) - master->bus_num = pdev->id; - - master->setup = omap1_spi100k_setup; - master->transfer = omap1_spi100k_transfer; - master->cleanup = NULL; - master->num_chipselect = 2; - master->mode_bits = MODEBITS; - - dev_set_drvdata(&pdev->dev, master); - - spi100k = spi_master_get_devdata(master); - spi100k->master = master; - - /* - * The memory region base address is taken as the platform_data. - * You should allocate this with ioremap() before initializing - * the SPI. - */ - spi100k->base = (void __iomem *) pdev->dev.platform_data; - - INIT_WORK(&spi100k->work, omap1_spi100k_work); - - spin_lock_init(&spi100k->lock); - INIT_LIST_HEAD(&spi100k->msg_queue); - spi100k->ick = clk_get(&pdev->dev, "ick"); - if (IS_ERR(spi100k->ick)) { - dev_dbg(&pdev->dev, "can't get spi100k_ick\n"); - status = PTR_ERR(spi100k->ick); - goto err1; - } - - spi100k->fck = clk_get(&pdev->dev, "fck"); - if (IS_ERR(spi100k->fck)) { - dev_dbg(&pdev->dev, "can't get spi100k_fck\n"); - status = PTR_ERR(spi100k->fck); - goto err2; - } - - if (omap1_spi100k_reset(spi100k) < 0) - goto err3; - - status = spi_register_master(master); - if (status < 0) - goto err3; - - spi100k->state = SPI_RUNNING; - - return status; - -err3: - clk_put(spi100k->fck); -err2: - clk_put(spi100k->ick); -err1: - spi_master_put(master); - return status; -} - -static int __exit omap1_spi100k_remove(struct platform_device *pdev) -{ - struct spi_master *master; - struct omap1_spi100k *spi100k; - struct resource *r; - unsigned limit = 500; - unsigned long flags; - int status = 0; - - master = dev_get_drvdata(&pdev->dev); - spi100k = spi_master_get_devdata(master); - - spin_lock_irqsave(&spi100k->lock, flags); - - spi100k->state = SPI_SHUTDOWN; - while (!list_empty(&spi100k->msg_queue) && limit--) { - spin_unlock_irqrestore(&spi100k->lock, flags); - msleep(10); - spin_lock_irqsave(&spi100k->lock, flags); - } - - if (!list_empty(&spi100k->msg_queue)) - status = -EBUSY; - - spin_unlock_irqrestore(&spi100k->lock, flags); - - if (status != 0) - return status; - - clk_put(spi100k->fck); - clk_put(spi100k->ick); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - spi_unregister_master(master); - - return 0; -} - -static struct platform_driver omap1_spi100k_driver = { - .driver = { - .name = "omap1_spi100k", - .owner = THIS_MODULE, - }, - .remove = __exit_p(omap1_spi100k_remove), -}; - - -static int __init omap1_spi100k_init(void) -{ - omap1_spi100k_wq = create_singlethread_workqueue( - omap1_spi100k_driver.driver.name); - - if (omap1_spi100k_wq == NULL) - return -1; - - return platform_driver_probe(&omap1_spi100k_driver, omap1_spi100k_probe); -} - -static void __exit omap1_spi100k_exit(void) -{ - platform_driver_unregister(&omap1_spi100k_driver); - - destroy_workqueue(omap1_spi100k_wq); -} - -module_init(omap1_spi100k_init); -module_exit(omap1_spi100k_exit); - -MODULE_DESCRIPTION("OMAP7xx SPI 100k controller driver"); -MODULE_AUTHOR("Fabrice Crohas "); -MODULE_LICENSE("GPL"); - diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c deleted file mode 100644 index 160d3266205f..000000000000 --- a/drivers/spi/omap_uwire.c +++ /dev/null @@ -1,593 +0,0 @@ -/* - * omap_uwire.c -- MicroWire interface driver for OMAP - * - * Copyright 2003 MontaVista Software Inc. - * - * Ported to 2.6 OMAP uwire interface. - * Copyright (C) 2004 Texas Instruments. - * - * Generalization patches by Juha Yrjola - * - * Copyright (C) 2005 David Brownell (ported to 2.6 SPI interface) - * Copyright (C) 2006 Nokia - * - * Many updates by Imre Deak - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include - -#include -#include /* OMAP7XX_IO_CONF registers */ - - -/* FIXME address is now a platform device resource, - * and irqs should show there too... - */ -#define UWIRE_BASE_PHYS 0xFFFB3000 - -/* uWire Registers: */ -#define UWIRE_IO_SIZE 0x20 -#define UWIRE_TDR 0x00 -#define UWIRE_RDR 0x00 -#define UWIRE_CSR 0x01 -#define UWIRE_SR1 0x02 -#define UWIRE_SR2 0x03 -#define UWIRE_SR3 0x04 -#define UWIRE_SR4 0x05 -#define UWIRE_SR5 0x06 - -/* CSR bits */ -#define RDRB (1 << 15) -#define CSRB (1 << 14) -#define START (1 << 13) -#define CS_CMD (1 << 12) - -/* SR1 or SR2 bits */ -#define UWIRE_READ_FALLING_EDGE 0x0001 -#define UWIRE_READ_RISING_EDGE 0x0000 -#define UWIRE_WRITE_FALLING_EDGE 0x0000 -#define UWIRE_WRITE_RISING_EDGE 0x0002 -#define UWIRE_CS_ACTIVE_LOW 0x0000 -#define UWIRE_CS_ACTIVE_HIGH 0x0004 -#define UWIRE_FREQ_DIV_2 0x0000 -#define UWIRE_FREQ_DIV_4 0x0008 -#define UWIRE_FREQ_DIV_8 0x0010 -#define UWIRE_CHK_READY 0x0020 -#define UWIRE_CLK_INVERTED 0x0040 - - -struct uwire_spi { - struct spi_bitbang bitbang; - struct clk *ck; -}; - -struct uwire_state { - unsigned bits_per_word; - unsigned div1_idx; -}; - -/* REVISIT compile time constant for idx_shift? */ -/* - * Or, put it in a structure which is used throughout the driver; - * that avoids having to issue two loads for each bit of static data. - */ -static unsigned int uwire_idx_shift; -static void __iomem *uwire_base; - -static inline void uwire_write_reg(int idx, u16 val) -{ - __raw_writew(val, uwire_base + (idx << uwire_idx_shift)); -} - -static inline u16 uwire_read_reg(int idx) -{ - return __raw_readw(uwire_base + (idx << uwire_idx_shift)); -} - -static inline void omap_uwire_configure_mode(u8 cs, unsigned long flags) -{ - u16 w, val = 0; - int shift, reg; - - if (flags & UWIRE_CLK_INVERTED) - val ^= 0x03; - val = flags & 0x3f; - if (cs & 1) - shift = 6; - else - shift = 0; - if (cs <= 1) - reg = UWIRE_SR1; - else - reg = UWIRE_SR2; - - w = uwire_read_reg(reg); - w &= ~(0x3f << shift); - w |= val << shift; - uwire_write_reg(reg, w); -} - -static int wait_uwire_csr_flag(u16 mask, u16 val, int might_not_catch) -{ - u16 w; - int c = 0; - unsigned long max_jiffies = jiffies + HZ; - - for (;;) { - w = uwire_read_reg(UWIRE_CSR); - if ((w & mask) == val) - break; - if (time_after(jiffies, max_jiffies)) { - printk(KERN_ERR "%s: timeout. reg=%#06x " - "mask=%#06x val=%#06x\n", - __func__, w, mask, val); - return -1; - } - c++; - if (might_not_catch && c > 64) - break; - } - return 0; -} - -static void uwire_set_clk1_div(int div1_idx) -{ - u16 w; - - w = uwire_read_reg(UWIRE_SR3); - w &= ~(0x03 << 1); - w |= div1_idx << 1; - uwire_write_reg(UWIRE_SR3, w); -} - -static void uwire_chipselect(struct spi_device *spi, int value) -{ - struct uwire_state *ust = spi->controller_state; - u16 w; - int old_cs; - - - BUG_ON(wait_uwire_csr_flag(CSRB, 0, 0)); - - w = uwire_read_reg(UWIRE_CSR); - old_cs = (w >> 10) & 0x03; - if (value == BITBANG_CS_INACTIVE || old_cs != spi->chip_select) { - /* Deselect this CS, or the previous CS */ - w &= ~CS_CMD; - uwire_write_reg(UWIRE_CSR, w); - } - /* activate specfied chipselect */ - if (value == BITBANG_CS_ACTIVE) { - uwire_set_clk1_div(ust->div1_idx); - /* invert clock? */ - if (spi->mode & SPI_CPOL) - uwire_write_reg(UWIRE_SR4, 1); - else - uwire_write_reg(UWIRE_SR4, 0); - - w = spi->chip_select << 10; - w |= CS_CMD; - uwire_write_reg(UWIRE_CSR, w); - } -} - -static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t) -{ - struct uwire_state *ust = spi->controller_state; - unsigned len = t->len; - unsigned bits = ust->bits_per_word; - unsigned bytes; - u16 val, w; - int status = 0; - - if (!t->tx_buf && !t->rx_buf) - return 0; - - /* Microwire doesn't read and write concurrently */ - if (t->tx_buf && t->rx_buf) - return -EPERM; - - w = spi->chip_select << 10; - w |= CS_CMD; - - if (t->tx_buf) { - const u8 *buf = t->tx_buf; - - /* NOTE: DMA could be used for TX transfers */ - - /* write one or two bytes at a time */ - while (len >= 1) { - /* tx bit 15 is first sent; we byteswap multibyte words - * (msb-first) on the way out from memory. - */ - val = *buf++; - if (bits > 8) { - bytes = 2; - val |= *buf++ << 8; - } else - bytes = 1; - val <<= 16 - bits; - -#ifdef VERBOSE - pr_debug("%s: write-%d =%04x\n", - dev_name(&spi->dev), bits, val); -#endif - if (wait_uwire_csr_flag(CSRB, 0, 0)) - goto eio; - - uwire_write_reg(UWIRE_TDR, val); - - /* start write */ - val = START | w | (bits << 5); - - uwire_write_reg(UWIRE_CSR, val); - len -= bytes; - - /* Wait till write actually starts. - * This is needed with MPU clock 60+ MHz. - * REVISIT: we may not have time to catch it... - */ - if (wait_uwire_csr_flag(CSRB, CSRB, 1)) - goto eio; - - status += bytes; - } - - /* REVISIT: save this for later to get more i/o overlap */ - if (wait_uwire_csr_flag(CSRB, 0, 0)) - goto eio; - - } else if (t->rx_buf) { - u8 *buf = t->rx_buf; - - /* read one or two bytes at a time */ - while (len) { - if (bits > 8) { - bytes = 2; - } else - bytes = 1; - - /* start read */ - val = START | w | (bits << 0); - uwire_write_reg(UWIRE_CSR, val); - len -= bytes; - - /* Wait till read actually starts */ - (void) wait_uwire_csr_flag(CSRB, CSRB, 1); - - if (wait_uwire_csr_flag(RDRB | CSRB, - RDRB, 0)) - goto eio; - - /* rx bit 0 is last received; multibyte words will - * be properly byteswapped on the way to memory. - */ - val = uwire_read_reg(UWIRE_RDR); - val &= (1 << bits) - 1; - *buf++ = (u8) val; - if (bytes == 2) - *buf++ = val >> 8; - status += bytes; -#ifdef VERBOSE - pr_debug("%s: read-%d =%04x\n", - dev_name(&spi->dev), bits, val); -#endif - - } - } - return status; -eio: - return -EIO; -} - -static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t) -{ - struct uwire_state *ust = spi->controller_state; - struct uwire_spi *uwire; - unsigned flags = 0; - unsigned bits; - unsigned hz; - unsigned long rate; - int div1_idx; - int div1; - int div2; - int status; - - uwire = spi_master_get_devdata(spi->master); - - if (spi->chip_select > 3) { - pr_debug("%s: cs%d?\n", dev_name(&spi->dev), spi->chip_select); - status = -ENODEV; - goto done; - } - - bits = spi->bits_per_word; - if (t != NULL && t->bits_per_word) - bits = t->bits_per_word; - - if (bits > 16) { - pr_debug("%s: wordsize %d?\n", dev_name(&spi->dev), bits); - status = -ENODEV; - goto done; - } - ust->bits_per_word = bits; - - /* mode 0..3, clock inverted separately; - * standard nCS signaling; - * don't treat DI=high as "not ready" - */ - if (spi->mode & SPI_CS_HIGH) - flags |= UWIRE_CS_ACTIVE_HIGH; - - if (spi->mode & SPI_CPOL) - flags |= UWIRE_CLK_INVERTED; - - switch (spi->mode & (SPI_CPOL | SPI_CPHA)) { - case SPI_MODE_0: - case SPI_MODE_3: - flags |= UWIRE_WRITE_FALLING_EDGE | UWIRE_READ_RISING_EDGE; - break; - case SPI_MODE_1: - case SPI_MODE_2: - flags |= UWIRE_WRITE_RISING_EDGE | UWIRE_READ_FALLING_EDGE; - break; - } - - /* assume it's already enabled */ - rate = clk_get_rate(uwire->ck); - - hz = spi->max_speed_hz; - if (t != NULL && t->speed_hz) - hz = t->speed_hz; - - if (!hz) { - pr_debug("%s: zero speed?\n", dev_name(&spi->dev)); - status = -EINVAL; - goto done; - } - - /* F_INT = mpu_xor_clk / DIV1 */ - for (div1_idx = 0; div1_idx < 4; div1_idx++) { - switch (div1_idx) { - case 0: - div1 = 2; - break; - case 1: - div1 = 4; - break; - case 2: - div1 = 7; - break; - default: - case 3: - div1 = 10; - break; - } - div2 = (rate / div1 + hz - 1) / hz; - if (div2 <= 8) - break; - } - if (div1_idx == 4) { - pr_debug("%s: lowest clock %ld, need %d\n", - dev_name(&spi->dev), rate / 10 / 8, hz); - status = -EDOM; - goto done; - } - - /* we have to cache this and reset in uwire_chipselect as this is a - * global parameter and another uwire device can change it under - * us */ - ust->div1_idx = div1_idx; - uwire_set_clk1_div(div1_idx); - - rate /= div1; - - switch (div2) { - case 0: - case 1: - case 2: - flags |= UWIRE_FREQ_DIV_2; - rate /= 2; - break; - case 3: - case 4: - flags |= UWIRE_FREQ_DIV_4; - rate /= 4; - break; - case 5: - case 6: - case 7: - case 8: - flags |= UWIRE_FREQ_DIV_8; - rate /= 8; - break; - } - omap_uwire_configure_mode(spi->chip_select, flags); - pr_debug("%s: uwire flags %02x, armxor %lu KHz, SCK %lu KHz\n", - __func__, flags, - clk_get_rate(uwire->ck) / 1000, - rate / 1000); - status = 0; -done: - return status; -} - -static int uwire_setup(struct spi_device *spi) -{ - struct uwire_state *ust = spi->controller_state; - - if (ust == NULL) { - ust = kzalloc(sizeof(*ust), GFP_KERNEL); - if (ust == NULL) - return -ENOMEM; - spi->controller_state = ust; - } - - return uwire_setup_transfer(spi, NULL); -} - -static void uwire_cleanup(struct spi_device *spi) -{ - kfree(spi->controller_state); -} - -static void uwire_off(struct uwire_spi *uwire) -{ - uwire_write_reg(UWIRE_SR3, 0); - clk_disable(uwire->ck); - clk_put(uwire->ck); - spi_master_put(uwire->bitbang.master); -} - -static int __init uwire_probe(struct platform_device *pdev) -{ - struct spi_master *master; - struct uwire_spi *uwire; - int status; - - master = spi_alloc_master(&pdev->dev, sizeof *uwire); - if (!master) - return -ENODEV; - - uwire = spi_master_get_devdata(master); - - uwire_base = ioremap(UWIRE_BASE_PHYS, UWIRE_IO_SIZE); - if (!uwire_base) { - dev_dbg(&pdev->dev, "can't ioremap UWIRE\n"); - spi_master_put(master); - return -ENOMEM; - } - - dev_set_drvdata(&pdev->dev, uwire); - - uwire->ck = clk_get(&pdev->dev, "fck"); - if (IS_ERR(uwire->ck)) { - status = PTR_ERR(uwire->ck); - dev_dbg(&pdev->dev, "no functional clock?\n"); - spi_master_put(master); - return status; - } - clk_enable(uwire->ck); - - if (cpu_is_omap7xx()) - uwire_idx_shift = 1; - else - uwire_idx_shift = 2; - - uwire_write_reg(UWIRE_SR3, 1); - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - - master->flags = SPI_MASTER_HALF_DUPLEX; - - master->bus_num = 2; /* "official" */ - master->num_chipselect = 4; - master->setup = uwire_setup; - master->cleanup = uwire_cleanup; - - uwire->bitbang.master = master; - uwire->bitbang.chipselect = uwire_chipselect; - uwire->bitbang.setup_transfer = uwire_setup_transfer; - uwire->bitbang.txrx_bufs = uwire_txrx; - - status = spi_bitbang_start(&uwire->bitbang); - if (status < 0) { - uwire_off(uwire); - iounmap(uwire_base); - } - return status; -} - -static int __exit uwire_remove(struct platform_device *pdev) -{ - struct uwire_spi *uwire = dev_get_drvdata(&pdev->dev); - int status; - - // FIXME remove all child devices, somewhere ... - - status = spi_bitbang_stop(&uwire->bitbang); - uwire_off(uwire); - iounmap(uwire_base); - return status; -} - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:omap_uwire"); - -static struct platform_driver uwire_driver = { - .driver = { - .name = "omap_uwire", - .owner = THIS_MODULE, - }, - .remove = __exit_p(uwire_remove), - // suspend ... unuse ck - // resume ... use ck -}; - -static int __init omap_uwire_init(void) -{ - /* FIXME move these into the relevant board init code. also, include - * H3 support; it uses tsc2101 like H2 (on a different chipselect). - */ - - if (machine_is_omap_h2()) { - /* defaults: W21 SDO, U18 SDI, V19 SCL */ - omap_cfg_reg(N14_1610_UWIRE_CS0); - omap_cfg_reg(N15_1610_UWIRE_CS1); - } - if (machine_is_omap_perseus2()) { - /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */ - int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000; - omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9); - } - - return platform_driver_probe(&uwire_driver, uwire_probe); -} - -static void __exit omap_uwire_exit(void) -{ - platform_driver_unregister(&uwire_driver); -} - -subsys_initcall(omap_uwire_init); -module_exit(omap_uwire_exit); - -MODULE_LICENSE("GPL"); - diff --git a/drivers/spi/orion_spi.c b/drivers/spi/orion_spi.c deleted file mode 100644 index 0b677dc041ad..000000000000 --- a/drivers/spi/orion_spi.c +++ /dev/null @@ -1,573 +0,0 @@ -/* - * orion_spi.c -- Marvell Orion SPI controller driver - * - * Author: Shadi Ammouri - * Copyright (C) 2007-2008 Marvell Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRIVER_NAME "orion_spi" - -#define ORION_NUM_CHIPSELECTS 1 /* only one slave is supported*/ -#define ORION_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */ - -#define ORION_SPI_IF_CTRL_REG 0x00 -#define ORION_SPI_IF_CONFIG_REG 0x04 -#define ORION_SPI_DATA_OUT_REG 0x08 -#define ORION_SPI_DATA_IN_REG 0x0c -#define ORION_SPI_INT_CAUSE_REG 0x10 - -#define ORION_SPI_IF_8_16_BIT_MODE (1 << 5) -#define ORION_SPI_CLK_PRESCALE_MASK 0x1F - -struct orion_spi { - struct work_struct work; - - /* Lock access to transfer list. */ - spinlock_t lock; - - struct list_head msg_queue; - struct spi_master *master; - void __iomem *base; - unsigned int max_speed; - unsigned int min_speed; - struct orion_spi_info *spi_info; -}; - -static struct workqueue_struct *orion_spi_wq; - -static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg) -{ - return orion_spi->base + reg; -} - -static inline void -orion_spi_setbits(struct orion_spi *orion_spi, u32 reg, u32 mask) -{ - void __iomem *reg_addr = spi_reg(orion_spi, reg); - u32 val; - - val = readl(reg_addr); - val |= mask; - writel(val, reg_addr); -} - -static inline void -orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask) -{ - void __iomem *reg_addr = spi_reg(orion_spi, reg); - u32 val; - - val = readl(reg_addr); - val &= ~mask; - writel(val, reg_addr); -} - -static int orion_spi_set_transfer_size(struct orion_spi *orion_spi, int size) -{ - if (size == 16) { - orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, - ORION_SPI_IF_8_16_BIT_MODE); - } else if (size == 8) { - orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG, - ORION_SPI_IF_8_16_BIT_MODE); - } else { - pr_debug("Bad bits per word value %d (only 8 or 16 are " - "allowed).\n", size); - return -EINVAL; - } - - return 0; -} - -static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed) -{ - u32 tclk_hz; - u32 rate; - u32 prescale; - u32 reg; - struct orion_spi *orion_spi; - - orion_spi = spi_master_get_devdata(spi->master); - - tclk_hz = orion_spi->spi_info->tclk; - - /* - * the supported rates are: 4,6,8...30 - * round up as we look for equal or less speed - */ - rate = DIV_ROUND_UP(tclk_hz, speed); - rate = roundup(rate, 2); - - /* check if requested speed is too small */ - if (rate > 30) - return -EINVAL; - - if (rate < 4) - rate = 4; - - /* Convert the rate to SPI clock divisor value. */ - prescale = 0x10 + rate/2; - - reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); - reg = ((reg & ~ORION_SPI_CLK_PRESCALE_MASK) | prescale); - writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); - - return 0; -} - -/* - * called only when no transfer is active on the bus - */ -static int -orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) -{ - struct orion_spi *orion_spi; - unsigned int speed = spi->max_speed_hz; - unsigned int bits_per_word = spi->bits_per_word; - int rc; - - orion_spi = spi_master_get_devdata(spi->master); - - if ((t != NULL) && t->speed_hz) - speed = t->speed_hz; - - if ((t != NULL) && t->bits_per_word) - bits_per_word = t->bits_per_word; - - rc = orion_spi_baudrate_set(spi, speed); - if (rc) - return rc; - - return orion_spi_set_transfer_size(orion_spi, bits_per_word); -} - -static void orion_spi_set_cs(struct orion_spi *orion_spi, int enable) -{ - if (enable) - orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); - else - orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); -} - -static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi) -{ - int i; - - for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) { - if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG))) - return 1; - else - udelay(1); - } - - return -1; -} - -static inline int -orion_spi_write_read_8bit(struct spi_device *spi, - const u8 **tx_buf, u8 **rx_buf) -{ - void __iomem *tx_reg, *rx_reg, *int_reg; - struct orion_spi *orion_spi; - - orion_spi = spi_master_get_devdata(spi->master); - tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); - rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); - int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); - - /* clear the interrupt cause register */ - writel(0x0, int_reg); - - if (tx_buf && *tx_buf) - writel(*(*tx_buf)++, tx_reg); - else - writel(0, tx_reg); - - if (orion_spi_wait_till_ready(orion_spi) < 0) { - dev_err(&spi->dev, "TXS timed out\n"); - return -1; - } - - if (rx_buf && *rx_buf) - *(*rx_buf)++ = readl(rx_reg); - - return 1; -} - -static inline int -orion_spi_write_read_16bit(struct spi_device *spi, - const u16 **tx_buf, u16 **rx_buf) -{ - void __iomem *tx_reg, *rx_reg, *int_reg; - struct orion_spi *orion_spi; - - orion_spi = spi_master_get_devdata(spi->master); - tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); - rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); - int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); - - /* clear the interrupt cause register */ - writel(0x0, int_reg); - - if (tx_buf && *tx_buf) - writel(__cpu_to_le16(get_unaligned((*tx_buf)++)), tx_reg); - else - writel(0, tx_reg); - - if (orion_spi_wait_till_ready(orion_spi) < 0) { - dev_err(&spi->dev, "TXS timed out\n"); - return -1; - } - - if (rx_buf && *rx_buf) - put_unaligned(__le16_to_cpu(readl(rx_reg)), (*rx_buf)++); - - return 1; -} - -static unsigned int -orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) -{ - struct orion_spi *orion_spi; - unsigned int count; - int word_len; - - orion_spi = spi_master_get_devdata(spi->master); - word_len = spi->bits_per_word; - count = xfer->len; - - if (word_len == 8) { - const u8 *tx = xfer->tx_buf; - u8 *rx = xfer->rx_buf; - - do { - if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0) - goto out; - count--; - } while (count); - } else if (word_len == 16) { - const u16 *tx = xfer->tx_buf; - u16 *rx = xfer->rx_buf; - - do { - if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0) - goto out; - count -= 2; - } while (count); - } - -out: - return xfer->len - count; -} - - -static void orion_spi_work(struct work_struct *work) -{ - struct orion_spi *orion_spi = - container_of(work, struct orion_spi, work); - - spin_lock_irq(&orion_spi->lock); - while (!list_empty(&orion_spi->msg_queue)) { - struct spi_message *m; - struct spi_device *spi; - struct spi_transfer *t = NULL; - int par_override = 0; - int status = 0; - int cs_active = 0; - - m = container_of(orion_spi->msg_queue.next, struct spi_message, - queue); - - list_del_init(&m->queue); - spin_unlock_irq(&orion_spi->lock); - - spi = m->spi; - - /* Load defaults */ - status = orion_spi_setup_transfer(spi, NULL); - - if (status < 0) - goto msg_done; - - list_for_each_entry(t, &m->transfers, transfer_list) { - if (par_override || t->speed_hz || t->bits_per_word) { - par_override = 1; - status = orion_spi_setup_transfer(spi, t); - if (status < 0) - break; - if (!t->speed_hz && !t->bits_per_word) - par_override = 0; - } - - if (!cs_active) { - orion_spi_set_cs(orion_spi, 1); - cs_active = 1; - } - - if (t->len) - m->actual_length += - orion_spi_write_read(spi, t); - - if (t->delay_usecs) - udelay(t->delay_usecs); - - if (t->cs_change) { - orion_spi_set_cs(orion_spi, 0); - cs_active = 0; - } - } - -msg_done: - if (cs_active) - orion_spi_set_cs(orion_spi, 0); - - m->status = status; - m->complete(m->context); - - spin_lock_irq(&orion_spi->lock); - } - - spin_unlock_irq(&orion_spi->lock); -} - -static int __init orion_spi_reset(struct orion_spi *orion_spi) -{ - /* Verify that the CS is deasserted */ - orion_spi_set_cs(orion_spi, 0); - - return 0; -} - -static int orion_spi_setup(struct spi_device *spi) -{ - struct orion_spi *orion_spi; - - orion_spi = spi_master_get_devdata(spi->master); - - /* Fix ac timing if required. */ - if (orion_spi->spi_info->enable_clock_fix) - orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, - (1 << 14)); - - if ((spi->max_speed_hz == 0) - || (spi->max_speed_hz > orion_spi->max_speed)) - spi->max_speed_hz = orion_spi->max_speed; - - if (spi->max_speed_hz < orion_spi->min_speed) { - dev_err(&spi->dev, "setup: requested speed too low %d Hz\n", - spi->max_speed_hz); - return -EINVAL; - } - - /* - * baudrate & width will be set orion_spi_setup_transfer - */ - return 0; -} - -static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m) -{ - struct orion_spi *orion_spi; - struct spi_transfer *t = NULL; - unsigned long flags; - - m->actual_length = 0; - m->status = 0; - - /* reject invalid messages and transfers */ - if (list_empty(&m->transfers) || !m->complete) - return -EINVAL; - - orion_spi = spi_master_get_devdata(spi->master); - - list_for_each_entry(t, &m->transfers, transfer_list) { - unsigned int bits_per_word = spi->bits_per_word; - - if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { - dev_err(&spi->dev, - "message rejected : " - "invalid transfer data buffers\n"); - goto msg_rejected; - } - - if (t->bits_per_word) - bits_per_word = t->bits_per_word; - - if ((bits_per_word != 8) && (bits_per_word != 16)) { - dev_err(&spi->dev, - "message rejected : " - "invalid transfer bits_per_word (%d bits)\n", - bits_per_word); - goto msg_rejected; - } - /*make sure buffer length is even when working in 16 bit mode*/ - if ((t->bits_per_word == 16) && (t->len & 1)) { - dev_err(&spi->dev, - "message rejected : " - "odd data length (%d) while in 16 bit mode\n", - t->len); - goto msg_rejected; - } - - if (t->speed_hz && t->speed_hz < orion_spi->min_speed) { - dev_err(&spi->dev, - "message rejected : " - "device min speed (%d Hz) exceeds " - "required transfer speed (%d Hz)\n", - orion_spi->min_speed, t->speed_hz); - goto msg_rejected; - } - } - - - spin_lock_irqsave(&orion_spi->lock, flags); - list_add_tail(&m->queue, &orion_spi->msg_queue); - queue_work(orion_spi_wq, &orion_spi->work); - spin_unlock_irqrestore(&orion_spi->lock, flags); - - return 0; -msg_rejected: - /* Message rejected and not queued */ - m->status = -EINVAL; - if (m->complete) - m->complete(m->context); - return -EINVAL; -} - -static int __init orion_spi_probe(struct platform_device *pdev) -{ - struct spi_master *master; - struct orion_spi *spi; - struct resource *r; - struct orion_spi_info *spi_info; - int status = 0; - - spi_info = pdev->dev.platform_data; - - master = spi_alloc_master(&pdev->dev, sizeof *spi); - if (master == NULL) { - dev_dbg(&pdev->dev, "master allocation failed\n"); - return -ENOMEM; - } - - if (pdev->id != -1) - master->bus_num = pdev->id; - - /* we support only mode 0, and no options */ - master->mode_bits = 0; - - master->setup = orion_spi_setup; - master->transfer = orion_spi_transfer; - master->num_chipselect = ORION_NUM_CHIPSELECTS; - - dev_set_drvdata(&pdev->dev, master); - - spi = spi_master_get_devdata(master); - spi->master = master; - spi->spi_info = spi_info; - - spi->max_speed = DIV_ROUND_UP(spi_info->tclk, 4); - spi->min_speed = DIV_ROUND_UP(spi_info->tclk, 30); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - status = -ENODEV; - goto out; - } - - if (!request_mem_region(r->start, (r->end - r->start) + 1, - dev_name(&pdev->dev))) { - status = -EBUSY; - goto out; - } - spi->base = ioremap(r->start, SZ_1K); - - INIT_WORK(&spi->work, orion_spi_work); - - spin_lock_init(&spi->lock); - INIT_LIST_HEAD(&spi->msg_queue); - - if (orion_spi_reset(spi) < 0) - goto out_rel_mem; - - status = spi_register_master(master); - if (status < 0) - goto out_rel_mem; - - return status; - -out_rel_mem: - release_mem_region(r->start, (r->end - r->start) + 1); - -out: - spi_master_put(master); - return status; -} - - -static int __exit orion_spi_remove(struct platform_device *pdev) -{ - struct spi_master *master; - struct orion_spi *spi; - struct resource *r; - - master = dev_get_drvdata(&pdev->dev); - spi = spi_master_get_devdata(master); - - cancel_work_sync(&spi->work); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, (r->end - r->start) + 1); - - spi_unregister_master(master); - - return 0; -} - -MODULE_ALIAS("platform:" DRIVER_NAME); - -static struct platform_driver orion_spi_driver = { - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, - .remove = __exit_p(orion_spi_remove), -}; - -static int __init orion_spi_init(void) -{ - orion_spi_wq = create_singlethread_workqueue( - orion_spi_driver.driver.name); - if (orion_spi_wq == NULL) - return -ENOMEM; - - return platform_driver_probe(&orion_spi_driver, orion_spi_probe); -} -module_init(orion_spi_init); - -static void __exit orion_spi_exit(void) -{ - flush_workqueue(orion_spi_wq); - platform_driver_unregister(&orion_spi_driver); - - destroy_workqueue(orion_spi_wq); -} -module_exit(orion_spi_exit); - -MODULE_DESCRIPTION("Orion SPI driver"); -MODULE_AUTHOR("Shadi Ammouri "); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c deleted file mode 100644 index dc25bee8d33f..000000000000 --- a/drivers/spi/pxa2xx_spi.c +++ /dev/null @@ -1,1816 +0,0 @@ -/* - * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - - -MODULE_AUTHOR("Stephen Street"); -MODULE_DESCRIPTION("PXA2xx SSP SPI Controller"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:pxa2xx-spi"); - -#define MAX_BUSES 3 - -#define TIMOUT_DFLT 1000 - -#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) -#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) -#define IS_DMA_ALIGNED(x) ((((u32)(x)) & 0x07) == 0) -#define MAX_DMA_LEN 8191 -#define DMA_ALIGNMENT 8 - -/* - * for testing SSCR1 changes that require SSP restart, basically - * everything except the service and interrupt enables, the pxa270 developer - * manual says only SSCR1_SCFR, SSCR1_SPH, SSCR1_SPO need to be in this - * list, but the PXA255 dev man says all bits without really meaning the - * service and interrupt enables - */ -#define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \ - | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \ - | SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \ - | SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \ - | SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \ - | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM) - -#define DEFINE_SSP_REG(reg, off) \ -static inline u32 read_##reg(void const __iomem *p) \ -{ return __raw_readl(p + (off)); } \ -\ -static inline void write_##reg(u32 v, void __iomem *p) \ -{ __raw_writel(v, p + (off)); } - -DEFINE_SSP_REG(SSCR0, 0x00) -DEFINE_SSP_REG(SSCR1, 0x04) -DEFINE_SSP_REG(SSSR, 0x08) -DEFINE_SSP_REG(SSITR, 0x0c) -DEFINE_SSP_REG(SSDR, 0x10) -DEFINE_SSP_REG(SSTO, 0x28) -DEFINE_SSP_REG(SSPSP, 0x2c) - -#define START_STATE ((void*)0) -#define RUNNING_STATE ((void*)1) -#define DONE_STATE ((void*)2) -#define ERROR_STATE ((void*)-1) - -#define QUEUE_RUNNING 0 -#define QUEUE_STOPPED 1 - -struct driver_data { - /* Driver model hookup */ - struct platform_device *pdev; - - /* SSP Info */ - struct ssp_device *ssp; - - /* SPI framework hookup */ - enum pxa_ssp_type ssp_type; - struct spi_master *master; - - /* PXA hookup */ - struct pxa2xx_spi_master *master_info; - - /* DMA setup stuff */ - int rx_channel; - int tx_channel; - u32 *null_dma_buf; - - /* SSP register addresses */ - void __iomem *ioaddr; - u32 ssdr_physical; - - /* SSP masks*/ - u32 dma_cr1; - u32 int_cr1; - u32 clear_sr; - u32 mask_sr; - - /* Driver message queue */ - struct workqueue_struct *workqueue; - struct work_struct pump_messages; - spinlock_t lock; - struct list_head queue; - int busy; - int run; - - /* Message Transfer pump */ - struct tasklet_struct pump_transfers; - - /* Current message transfer state info */ - struct spi_message* cur_msg; - struct spi_transfer* cur_transfer; - struct chip_data *cur_chip; - size_t len; - void *tx; - void *tx_end; - void *rx; - void *rx_end; - int dma_mapped; - dma_addr_t rx_dma; - dma_addr_t tx_dma; - size_t rx_map_len; - size_t tx_map_len; - u8 n_bytes; - u32 dma_width; - int (*write)(struct driver_data *drv_data); - int (*read)(struct driver_data *drv_data); - irqreturn_t (*transfer_handler)(struct driver_data *drv_data); - void (*cs_control)(u32 command); -}; - -struct chip_data { - u32 cr0; - u32 cr1; - u32 psp; - u32 timeout; - u8 n_bytes; - u32 dma_width; - u32 dma_burst_size; - u32 threshold; - u32 dma_threshold; - u8 enable_dma; - u8 bits_per_word; - u32 speed_hz; - union { - int gpio_cs; - unsigned int frm; - }; - int gpio_cs_inverted; - int (*write)(struct driver_data *drv_data); - int (*read)(struct driver_data *drv_data); - void (*cs_control)(u32 command); -}; - -static void pump_messages(struct work_struct *work); - -static void cs_assert(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - if (drv_data->ssp_type == CE4100_SSP) { - write_SSSR(drv_data->cur_chip->frm, drv_data->ioaddr); - return; - } - - if (chip->cs_control) { - chip->cs_control(PXA2XX_CS_ASSERT); - return; - } - - if (gpio_is_valid(chip->gpio_cs)) - gpio_set_value(chip->gpio_cs, chip->gpio_cs_inverted); -} - -static void cs_deassert(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - if (drv_data->ssp_type == CE4100_SSP) - return; - - if (chip->cs_control) { - chip->cs_control(PXA2XX_CS_DEASSERT); - return; - } - - if (gpio_is_valid(chip->gpio_cs)) - gpio_set_value(chip->gpio_cs, !chip->gpio_cs_inverted); -} - -static void write_SSSR_CS(struct driver_data *drv_data, u32 val) -{ - void __iomem *reg = drv_data->ioaddr; - - if (drv_data->ssp_type == CE4100_SSP) - val |= read_SSSR(reg) & SSSR_ALT_FRM_MASK; - - write_SSSR(val, reg); -} - -static int pxa25x_ssp_comp(struct driver_data *drv_data) -{ - if (drv_data->ssp_type == PXA25x_SSP) - return 1; - if (drv_data->ssp_type == CE4100_SSP) - return 1; - return 0; -} - -static int flush(struct driver_data *drv_data) -{ - unsigned long limit = loops_per_jiffy << 1; - - void __iomem *reg = drv_data->ioaddr; - - do { - while (read_SSSR(reg) & SSSR_RNE) { - read_SSDR(reg); - } - } while ((read_SSSR(reg) & SSSR_BSY) && --limit); - write_SSSR_CS(drv_data, SSSR_ROR); - - return limit; -} - -static int null_writer(struct driver_data *drv_data) -{ - void __iomem *reg = drv_data->ioaddr; - u8 n_bytes = drv_data->n_bytes; - - if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) - || (drv_data->tx == drv_data->tx_end)) - return 0; - - write_SSDR(0, reg); - drv_data->tx += n_bytes; - - return 1; -} - -static int null_reader(struct driver_data *drv_data) -{ - void __iomem *reg = drv_data->ioaddr; - u8 n_bytes = drv_data->n_bytes; - - while ((read_SSSR(reg) & SSSR_RNE) - && (drv_data->rx < drv_data->rx_end)) { - read_SSDR(reg); - drv_data->rx += n_bytes; - } - - return drv_data->rx == drv_data->rx_end; -} - -static int u8_writer(struct driver_data *drv_data) -{ - void __iomem *reg = drv_data->ioaddr; - - if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) - || (drv_data->tx == drv_data->tx_end)) - return 0; - - write_SSDR(*(u8 *)(drv_data->tx), reg); - ++drv_data->tx; - - return 1; -} - -static int u8_reader(struct driver_data *drv_data) -{ - void __iomem *reg = drv_data->ioaddr; - - while ((read_SSSR(reg) & SSSR_RNE) - && (drv_data->rx < drv_data->rx_end)) { - *(u8 *)(drv_data->rx) = read_SSDR(reg); - ++drv_data->rx; - } - - return drv_data->rx == drv_data->rx_end; -} - -static int u16_writer(struct driver_data *drv_data) -{ - void __iomem *reg = drv_data->ioaddr; - - if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) - || (drv_data->tx == drv_data->tx_end)) - return 0; - - write_SSDR(*(u16 *)(drv_data->tx), reg); - drv_data->tx += 2; - - return 1; -} - -static int u16_reader(struct driver_data *drv_data) -{ - void __iomem *reg = drv_data->ioaddr; - - while ((read_SSSR(reg) & SSSR_RNE) - && (drv_data->rx < drv_data->rx_end)) { - *(u16 *)(drv_data->rx) = read_SSDR(reg); - drv_data->rx += 2; - } - - return drv_data->rx == drv_data->rx_end; -} - -static int u32_writer(struct driver_data *drv_data) -{ - void __iomem *reg = drv_data->ioaddr; - - if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) - || (drv_data->tx == drv_data->tx_end)) - return 0; - - write_SSDR(*(u32 *)(drv_data->tx), reg); - drv_data->tx += 4; - - return 1; -} - -static int u32_reader(struct driver_data *drv_data) -{ - void __iomem *reg = drv_data->ioaddr; - - while ((read_SSSR(reg) & SSSR_RNE) - && (drv_data->rx < drv_data->rx_end)) { - *(u32 *)(drv_data->rx) = read_SSDR(reg); - drv_data->rx += 4; - } - - return drv_data->rx == drv_data->rx_end; -} - -static void *next_transfer(struct driver_data *drv_data) -{ - struct spi_message *msg = drv_data->cur_msg; - struct spi_transfer *trans = drv_data->cur_transfer; - - /* Move to next transfer */ - if (trans->transfer_list.next != &msg->transfers) { - drv_data->cur_transfer = - list_entry(trans->transfer_list.next, - struct spi_transfer, - transfer_list); - return RUNNING_STATE; - } else - return DONE_STATE; -} - -static int map_dma_buffers(struct driver_data *drv_data) -{ - struct spi_message *msg = drv_data->cur_msg; - struct device *dev = &msg->spi->dev; - - if (!drv_data->cur_chip->enable_dma) - return 0; - - if (msg->is_dma_mapped) - return drv_data->rx_dma && drv_data->tx_dma; - - if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx)) - return 0; - - /* Modify setup if rx buffer is null */ - if (drv_data->rx == NULL) { - *drv_data->null_dma_buf = 0; - drv_data->rx = drv_data->null_dma_buf; - drv_data->rx_map_len = 4; - } else - drv_data->rx_map_len = drv_data->len; - - - /* Modify setup if tx buffer is null */ - if (drv_data->tx == NULL) { - *drv_data->null_dma_buf = 0; - drv_data->tx = drv_data->null_dma_buf; - drv_data->tx_map_len = 4; - } else - drv_data->tx_map_len = drv_data->len; - - /* Stream map the tx buffer. Always do DMA_TO_DEVICE first - * so we flush the cache *before* invalidating it, in case - * the tx and rx buffers overlap. - */ - drv_data->tx_dma = dma_map_single(dev, drv_data->tx, - drv_data->tx_map_len, DMA_TO_DEVICE); - if (dma_mapping_error(dev, drv_data->tx_dma)) - return 0; - - /* Stream map the rx buffer */ - drv_data->rx_dma = dma_map_single(dev, drv_data->rx, - drv_data->rx_map_len, DMA_FROM_DEVICE); - if (dma_mapping_error(dev, drv_data->rx_dma)) { - dma_unmap_single(dev, drv_data->tx_dma, - drv_data->tx_map_len, DMA_TO_DEVICE); - return 0; - } - - return 1; -} - -static void unmap_dma_buffers(struct driver_data *drv_data) -{ - struct device *dev; - - if (!drv_data->dma_mapped) - return; - - if (!drv_data->cur_msg->is_dma_mapped) { - dev = &drv_data->cur_msg->spi->dev; - dma_unmap_single(dev, drv_data->rx_dma, - drv_data->rx_map_len, DMA_FROM_DEVICE); - dma_unmap_single(dev, drv_data->tx_dma, - drv_data->tx_map_len, DMA_TO_DEVICE); - } - - drv_data->dma_mapped = 0; -} - -/* caller already set message->status; dma and pio irqs are blocked */ -static void giveback(struct driver_data *drv_data) -{ - struct spi_transfer* last_transfer; - unsigned long flags; - struct spi_message *msg; - - spin_lock_irqsave(&drv_data->lock, flags); - msg = drv_data->cur_msg; - drv_data->cur_msg = NULL; - drv_data->cur_transfer = NULL; - queue_work(drv_data->workqueue, &drv_data->pump_messages); - spin_unlock_irqrestore(&drv_data->lock, flags); - - last_transfer = list_entry(msg->transfers.prev, - struct spi_transfer, - transfer_list); - - /* Delay if requested before any change in chip select */ - if (last_transfer->delay_usecs) - udelay(last_transfer->delay_usecs); - - /* Drop chip select UNLESS cs_change is true or we are returning - * a message with an error, or next message is for another chip - */ - if (!last_transfer->cs_change) - cs_deassert(drv_data); - else { - struct spi_message *next_msg; - - /* Holding of cs was hinted, but we need to make sure - * the next message is for the same chip. Don't waste - * time with the following tests unless this was hinted. - * - * We cannot postpone this until pump_messages, because - * after calling msg->complete (below) the driver that - * sent the current message could be unloaded, which - * could invalidate the cs_control() callback... - */ - - /* get a pointer to the next message, if any */ - spin_lock_irqsave(&drv_data->lock, flags); - if (list_empty(&drv_data->queue)) - next_msg = NULL; - else - next_msg = list_entry(drv_data->queue.next, - struct spi_message, queue); - spin_unlock_irqrestore(&drv_data->lock, flags); - - /* see if the next and current messages point - * to the same chip - */ - if (next_msg && next_msg->spi != msg->spi) - next_msg = NULL; - if (!next_msg || msg->state == ERROR_STATE) - cs_deassert(drv_data); - } - - msg->state = NULL; - if (msg->complete) - msg->complete(msg->context); - - drv_data->cur_chip = NULL; -} - -static int wait_ssp_rx_stall(void const __iomem *ioaddr) -{ - unsigned long limit = loops_per_jiffy << 1; - - while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit) - cpu_relax(); - - return limit; -} - -static int wait_dma_channel_stop(int channel) -{ - unsigned long limit = loops_per_jiffy << 1; - - while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit) - cpu_relax(); - - return limit; -} - -static void dma_error_stop(struct driver_data *drv_data, const char *msg) -{ - void __iomem *reg = drv_data->ioaddr; - - /* Stop and reset */ - DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; - DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; - write_SSSR_CS(drv_data, drv_data->clear_sr); - write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); - if (!pxa25x_ssp_comp(drv_data)) - write_SSTO(0, reg); - flush(drv_data); - write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); - - unmap_dma_buffers(drv_data); - - dev_err(&drv_data->pdev->dev, "%s\n", msg); - - drv_data->cur_msg->state = ERROR_STATE; - tasklet_schedule(&drv_data->pump_transfers); -} - -static void dma_transfer_complete(struct driver_data *drv_data) -{ - void __iomem *reg = drv_data->ioaddr; - struct spi_message *msg = drv_data->cur_msg; - - /* Clear and disable interrupts on SSP and DMA channels*/ - write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); - write_SSSR_CS(drv_data, drv_data->clear_sr); - DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; - DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; - - if (wait_dma_channel_stop(drv_data->rx_channel) == 0) - dev_err(&drv_data->pdev->dev, - "dma_handler: dma rx channel stop failed\n"); - - if (wait_ssp_rx_stall(drv_data->ioaddr) == 0) - dev_err(&drv_data->pdev->dev, - "dma_transfer: ssp rx stall failed\n"); - - unmap_dma_buffers(drv_data); - - /* update the buffer pointer for the amount completed in dma */ - drv_data->rx += drv_data->len - - (DCMD(drv_data->rx_channel) & DCMD_LENGTH); - - /* read trailing data from fifo, it does not matter how many - * bytes are in the fifo just read until buffer is full - * or fifo is empty, which ever occurs first */ - drv_data->read(drv_data); - - /* return count of what was actually read */ - msg->actual_length += drv_data->len - - (drv_data->rx_end - drv_data->rx); - - /* Transfer delays and chip select release are - * handled in pump_transfers or giveback - */ - - /* Move to next transfer */ - msg->state = next_transfer(drv_data); - - /* Schedule transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); -} - -static void dma_handler(int channel, void *data) -{ - struct driver_data *drv_data = data; - u32 irq_status = DCSR(channel) & DMA_INT_MASK; - - if (irq_status & DCSR_BUSERR) { - - if (channel == drv_data->tx_channel) - dma_error_stop(drv_data, - "dma_handler: " - "bad bus address on tx channel"); - else - dma_error_stop(drv_data, - "dma_handler: " - "bad bus address on rx channel"); - return; - } - - /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */ - if ((channel == drv_data->tx_channel) - && (irq_status & DCSR_ENDINTR) - && (drv_data->ssp_type == PXA25x_SSP)) { - - /* Wait for rx to stall */ - if (wait_ssp_rx_stall(drv_data->ioaddr) == 0) - dev_err(&drv_data->pdev->dev, - "dma_handler: ssp rx stall failed\n"); - - /* finish this transfer, start the next */ - dma_transfer_complete(drv_data); - } -} - -static irqreturn_t dma_transfer(struct driver_data *drv_data) -{ - u32 irq_status; - void __iomem *reg = drv_data->ioaddr; - - irq_status = read_SSSR(reg) & drv_data->mask_sr; - if (irq_status & SSSR_ROR) { - dma_error_stop(drv_data, "dma_transfer: fifo overrun"); - return IRQ_HANDLED; - } - - /* Check for false positive timeout */ - if ((irq_status & SSSR_TINT) - && (DCSR(drv_data->tx_channel) & DCSR_RUN)) { - write_SSSR(SSSR_TINT, reg); - return IRQ_HANDLED; - } - - if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) { - - /* Clear and disable timeout interrupt, do the rest in - * dma_transfer_complete */ - if (!pxa25x_ssp_comp(drv_data)) - write_SSTO(0, reg); - - /* finish this transfer, start the next */ - dma_transfer_complete(drv_data); - - return IRQ_HANDLED; - } - - /* Opps problem detected */ - return IRQ_NONE; -} - -static void reset_sccr1(struct driver_data *drv_data) -{ - void __iomem *reg = drv_data->ioaddr; - struct chip_data *chip = drv_data->cur_chip; - u32 sccr1_reg; - - sccr1_reg = read_SSCR1(reg) & ~drv_data->int_cr1; - sccr1_reg &= ~SSCR1_RFT; - sccr1_reg |= chip->threshold; - write_SSCR1(sccr1_reg, reg); -} - -static void int_error_stop(struct driver_data *drv_data, const char* msg) -{ - void __iomem *reg = drv_data->ioaddr; - - /* Stop and reset SSP */ - write_SSSR_CS(drv_data, drv_data->clear_sr); - reset_sccr1(drv_data); - if (!pxa25x_ssp_comp(drv_data)) - write_SSTO(0, reg); - flush(drv_data); - write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); - - dev_err(&drv_data->pdev->dev, "%s\n", msg); - - drv_data->cur_msg->state = ERROR_STATE; - tasklet_schedule(&drv_data->pump_transfers); -} - -static void int_transfer_complete(struct driver_data *drv_data) -{ - void __iomem *reg = drv_data->ioaddr; - - /* Stop SSP */ - write_SSSR_CS(drv_data, drv_data->clear_sr); - reset_sccr1(drv_data); - if (!pxa25x_ssp_comp(drv_data)) - write_SSTO(0, reg); - - /* Update total byte transferred return count actual bytes read */ - drv_data->cur_msg->actual_length += drv_data->len - - (drv_data->rx_end - drv_data->rx); - - /* Transfer delays and chip select release are - * handled in pump_transfers or giveback - */ - - /* Move to next transfer */ - drv_data->cur_msg->state = next_transfer(drv_data); - - /* Schedule transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); -} - -static irqreturn_t interrupt_transfer(struct driver_data *drv_data) -{ - void __iomem *reg = drv_data->ioaddr; - - u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ? - drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS; - - u32 irq_status = read_SSSR(reg) & irq_mask; - - if (irq_status & SSSR_ROR) { - int_error_stop(drv_data, "interrupt_transfer: fifo overrun"); - return IRQ_HANDLED; - } - - if (irq_status & SSSR_TINT) { - write_SSSR(SSSR_TINT, reg); - if (drv_data->read(drv_data)) { - int_transfer_complete(drv_data); - return IRQ_HANDLED; - } - } - - /* Drain rx fifo, Fill tx fifo and prevent overruns */ - do { - if (drv_data->read(drv_data)) { - int_transfer_complete(drv_data); - return IRQ_HANDLED; - } - } while (drv_data->write(drv_data)); - - if (drv_data->read(drv_data)) { - int_transfer_complete(drv_data); - return IRQ_HANDLED; - } - - if (drv_data->tx == drv_data->tx_end) { - u32 bytes_left; - u32 sccr1_reg; - - sccr1_reg = read_SSCR1(reg); - sccr1_reg &= ~SSCR1_TIE; - - /* - * PXA25x_SSP has no timeout, set up rx threshould for the - * remaining RX bytes. - */ - if (pxa25x_ssp_comp(drv_data)) { - - sccr1_reg &= ~SSCR1_RFT; - - bytes_left = drv_data->rx_end - drv_data->rx; - switch (drv_data->n_bytes) { - case 4: - bytes_left >>= 1; - case 2: - bytes_left >>= 1; - } - - if (bytes_left > RX_THRESH_DFLT) - bytes_left = RX_THRESH_DFLT; - - sccr1_reg |= SSCR1_RxTresh(bytes_left); - } - write_SSCR1(sccr1_reg, reg); - } - - /* We did something */ - return IRQ_HANDLED; -} - -static irqreturn_t ssp_int(int irq, void *dev_id) -{ - struct driver_data *drv_data = dev_id; - void __iomem *reg = drv_data->ioaddr; - u32 sccr1_reg = read_SSCR1(reg); - u32 mask = drv_data->mask_sr; - u32 status; - - status = read_SSSR(reg); - - /* Ignore possible writes if we don't need to write */ - if (!(sccr1_reg & SSCR1_TIE)) - mask &= ~SSSR_TFS; - - if (!(status & mask)) - return IRQ_NONE; - - if (!drv_data->cur_msg) { - - write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); - write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg); - if (!pxa25x_ssp_comp(drv_data)) - write_SSTO(0, reg); - write_SSSR_CS(drv_data, drv_data->clear_sr); - - dev_err(&drv_data->pdev->dev, "bad message state " - "in interrupt handler\n"); - - /* Never fail */ - return IRQ_HANDLED; - } - - return drv_data->transfer_handler(drv_data); -} - -static int set_dma_burst_and_threshold(struct chip_data *chip, - struct spi_device *spi, - u8 bits_per_word, u32 *burst_code, - u32 *threshold) -{ - struct pxa2xx_spi_chip *chip_info = - (struct pxa2xx_spi_chip *)spi->controller_data; - int bytes_per_word; - int burst_bytes; - int thresh_words; - int req_burst_size; - int retval = 0; - - /* Set the threshold (in registers) to equal the same amount of data - * as represented by burst size (in bytes). The computation below - * is (burst_size rounded up to nearest 8 byte, word or long word) - * divided by (bytes/register); the tx threshold is the inverse of - * the rx, so that there will always be enough data in the rx fifo - * to satisfy a burst, and there will always be enough space in the - * tx fifo to accept a burst (a tx burst will overwrite the fifo if - * there is not enough space), there must always remain enough empty - * space in the rx fifo for any data loaded to the tx fifo. - * Whenever burst_size (in bytes) equals bits/word, the fifo threshold - * will be 8, or half the fifo; - * The threshold can only be set to 2, 4 or 8, but not 16, because - * to burst 16 to the tx fifo, the fifo would have to be empty; - * however, the minimum fifo trigger level is 1, and the tx will - * request service when the fifo is at this level, with only 15 spaces. - */ - - /* find bytes/word */ - if (bits_per_word <= 8) - bytes_per_word = 1; - else if (bits_per_word <= 16) - bytes_per_word = 2; - else - bytes_per_word = 4; - - /* use struct pxa2xx_spi_chip->dma_burst_size if available */ - if (chip_info) - req_burst_size = chip_info->dma_burst_size; - else { - switch (chip->dma_burst_size) { - default: - /* if the default burst size is not set, - * do it now */ - chip->dma_burst_size = DCMD_BURST8; - case DCMD_BURST8: - req_burst_size = 8; - break; - case DCMD_BURST16: - req_burst_size = 16; - break; - case DCMD_BURST32: - req_burst_size = 32; - break; - } - } - if (req_burst_size <= 8) { - *burst_code = DCMD_BURST8; - burst_bytes = 8; - } else if (req_burst_size <= 16) { - if (bytes_per_word == 1) { - /* don't burst more than 1/2 the fifo */ - *burst_code = DCMD_BURST8; - burst_bytes = 8; - retval = 1; - } else { - *burst_code = DCMD_BURST16; - burst_bytes = 16; - } - } else { - if (bytes_per_word == 1) { - /* don't burst more than 1/2 the fifo */ - *burst_code = DCMD_BURST8; - burst_bytes = 8; - retval = 1; - } else if (bytes_per_word == 2) { - /* don't burst more than 1/2 the fifo */ - *burst_code = DCMD_BURST16; - burst_bytes = 16; - retval = 1; - } else { - *burst_code = DCMD_BURST32; - burst_bytes = 32; - } - } - - thresh_words = burst_bytes / bytes_per_word; - - /* thresh_words will be between 2 and 8 */ - *threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT) - | (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT); - - return retval; -} - -static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate) -{ - unsigned long ssp_clk = clk_get_rate(ssp->clk); - - if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP) - return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8; - else - return ((ssp_clk / rate - 1) & 0xfff) << 8; -} - -static void pump_transfers(unsigned long data) -{ - struct driver_data *drv_data = (struct driver_data *)data; - struct spi_message *message = NULL; - struct spi_transfer *transfer = NULL; - struct spi_transfer *previous = NULL; - struct chip_data *chip = NULL; - struct ssp_device *ssp = drv_data->ssp; - void __iomem *reg = drv_data->ioaddr; - u32 clk_div = 0; - u8 bits = 0; - u32 speed = 0; - u32 cr0; - u32 cr1; - u32 dma_thresh = drv_data->cur_chip->dma_threshold; - u32 dma_burst = drv_data->cur_chip->dma_burst_size; - - /* Get current state information */ - message = drv_data->cur_msg; - transfer = drv_data->cur_transfer; - chip = drv_data->cur_chip; - - /* Handle for abort */ - if (message->state == ERROR_STATE) { - message->status = -EIO; - giveback(drv_data); - return; - } - - /* Handle end of message */ - if (message->state == DONE_STATE) { - message->status = 0; - giveback(drv_data); - return; - } - - /* Delay if requested at end of transfer before CS change */ - if (message->state == RUNNING_STATE) { - previous = list_entry(transfer->transfer_list.prev, - struct spi_transfer, - transfer_list); - if (previous->delay_usecs) - udelay(previous->delay_usecs); - - /* Drop chip select only if cs_change is requested */ - if (previous->cs_change) - cs_deassert(drv_data); - } - - /* Check for transfers that need multiple DMA segments */ - if (transfer->len > MAX_DMA_LEN && chip->enable_dma) { - - /* reject already-mapped transfers; PIO won't always work */ - if (message->is_dma_mapped - || transfer->rx_dma || transfer->tx_dma) { - dev_err(&drv_data->pdev->dev, - "pump_transfers: mapped transfer length " - "of %u is greater than %d\n", - transfer->len, MAX_DMA_LEN); - message->status = -EINVAL; - giveback(drv_data); - return; - } - - /* warn ... we force this to PIO mode */ - if (printk_ratelimit()) - dev_warn(&message->spi->dev, "pump_transfers: " - "DMA disabled for transfer length %ld " - "greater than %d\n", - (long)drv_data->len, MAX_DMA_LEN); - } - - /* Setup the transfer state based on the type of transfer */ - if (flush(drv_data) == 0) { - dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); - message->status = -EIO; - giveback(drv_data); - return; - } - drv_data->n_bytes = chip->n_bytes; - drv_data->dma_width = chip->dma_width; - drv_data->tx = (void *)transfer->tx_buf; - drv_data->tx_end = drv_data->tx + transfer->len; - drv_data->rx = transfer->rx_buf; - drv_data->rx_end = drv_data->rx + transfer->len; - drv_data->rx_dma = transfer->rx_dma; - drv_data->tx_dma = transfer->tx_dma; - drv_data->len = transfer->len & DCMD_LENGTH; - drv_data->write = drv_data->tx ? chip->write : null_writer; - drv_data->read = drv_data->rx ? chip->read : null_reader; - - /* Change speed and bit per word on a per transfer */ - cr0 = chip->cr0; - if (transfer->speed_hz || transfer->bits_per_word) { - - bits = chip->bits_per_word; - speed = chip->speed_hz; - - if (transfer->speed_hz) - speed = transfer->speed_hz; - - if (transfer->bits_per_word) - bits = transfer->bits_per_word; - - clk_div = ssp_get_clk_div(ssp, speed); - - if (bits <= 8) { - drv_data->n_bytes = 1; - drv_data->dma_width = DCMD_WIDTH1; - drv_data->read = drv_data->read != null_reader ? - u8_reader : null_reader; - drv_data->write = drv_data->write != null_writer ? - u8_writer : null_writer; - } else if (bits <= 16) { - drv_data->n_bytes = 2; - drv_data->dma_width = DCMD_WIDTH2; - drv_data->read = drv_data->read != null_reader ? - u16_reader : null_reader; - drv_data->write = drv_data->write != null_writer ? - u16_writer : null_writer; - } else if (bits <= 32) { - drv_data->n_bytes = 4; - drv_data->dma_width = DCMD_WIDTH4; - drv_data->read = drv_data->read != null_reader ? - u32_reader : null_reader; - drv_data->write = drv_data->write != null_writer ? - u32_writer : null_writer; - } - /* if bits/word is changed in dma mode, then must check the - * thresholds and burst also */ - if (chip->enable_dma) { - if (set_dma_burst_and_threshold(chip, message->spi, - bits, &dma_burst, - &dma_thresh)) - if (printk_ratelimit()) - dev_warn(&message->spi->dev, - "pump_transfers: " - "DMA burst size reduced to " - "match bits_per_word\n"); - } - - cr0 = clk_div - | SSCR0_Motorola - | SSCR0_DataSize(bits > 16 ? bits - 16 : bits) - | SSCR0_SSE - | (bits > 16 ? SSCR0_EDSS : 0); - } - - message->state = RUNNING_STATE; - - /* Try to map dma buffer and do a dma transfer if successful, but - * only if the length is non-zero and less than MAX_DMA_LEN. - * - * Zero-length non-descriptor DMA is illegal on PXA2xx; force use - * of PIO instead. Care is needed above because the transfer may - * have have been passed with buffers that are already dma mapped. - * A zero-length transfer in PIO mode will not try to write/read - * to/from the buffers - * - * REVISIT large transfers are exactly where we most want to be - * using DMA. If this happens much, split those transfers into - * multiple DMA segments rather than forcing PIO. - */ - drv_data->dma_mapped = 0; - if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN) - drv_data->dma_mapped = map_dma_buffers(drv_data); - if (drv_data->dma_mapped) { - - /* Ensure we have the correct interrupt handler */ - drv_data->transfer_handler = dma_transfer; - - /* Setup rx DMA Channel */ - DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; - DSADR(drv_data->rx_channel) = drv_data->ssdr_physical; - DTADR(drv_data->rx_channel) = drv_data->rx_dma; - if (drv_data->rx == drv_data->null_dma_buf) - /* No target address increment */ - DCMD(drv_data->rx_channel) = DCMD_FLOWSRC - | drv_data->dma_width - | dma_burst - | drv_data->len; - else - DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR - | DCMD_FLOWSRC - | drv_data->dma_width - | dma_burst - | drv_data->len; - - /* Setup tx DMA Channel */ - DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; - DSADR(drv_data->tx_channel) = drv_data->tx_dma; - DTADR(drv_data->tx_channel) = drv_data->ssdr_physical; - if (drv_data->tx == drv_data->null_dma_buf) - /* No source address increment */ - DCMD(drv_data->tx_channel) = DCMD_FLOWTRG - | drv_data->dma_width - | dma_burst - | drv_data->len; - else - DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR - | DCMD_FLOWTRG - | drv_data->dma_width - | dma_burst - | drv_data->len; - - /* Enable dma end irqs on SSP to detect end of transfer */ - if (drv_data->ssp_type == PXA25x_SSP) - DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN; - - /* Clear status and start DMA engine */ - cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1; - write_SSSR(drv_data->clear_sr, reg); - DCSR(drv_data->rx_channel) |= DCSR_RUN; - DCSR(drv_data->tx_channel) |= DCSR_RUN; - } else { - /* Ensure we have the correct interrupt handler */ - drv_data->transfer_handler = interrupt_transfer; - - /* Clear status */ - cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1; - write_SSSR_CS(drv_data, drv_data->clear_sr); - } - - /* see if we need to reload the config registers */ - if ((read_SSCR0(reg) != cr0) - || (read_SSCR1(reg) & SSCR1_CHANGE_MASK) != - (cr1 & SSCR1_CHANGE_MASK)) { - - /* stop the SSP, and update the other bits */ - write_SSCR0(cr0 & ~SSCR0_SSE, reg); - if (!pxa25x_ssp_comp(drv_data)) - write_SSTO(chip->timeout, reg); - /* first set CR1 without interrupt and service enables */ - write_SSCR1(cr1 & SSCR1_CHANGE_MASK, reg); - /* restart the SSP */ - write_SSCR0(cr0, reg); - - } else { - if (!pxa25x_ssp_comp(drv_data)) - write_SSTO(chip->timeout, reg); - } - - cs_assert(drv_data); - - /* after chip select, release the data by enabling service - * requests and interrupts, without changing any mode bits */ - write_SSCR1(cr1, reg); -} - -static void pump_messages(struct work_struct *work) -{ - struct driver_data *drv_data = - container_of(work, struct driver_data, pump_messages); - unsigned long flags; - - /* Lock queue and check for queue work */ - spin_lock_irqsave(&drv_data->lock, flags); - if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) { - drv_data->busy = 0; - spin_unlock_irqrestore(&drv_data->lock, flags); - return; - } - - /* Make sure we are not already running a message */ - if (drv_data->cur_msg) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return; - } - - /* Extract head of queue */ - drv_data->cur_msg = list_entry(drv_data->queue.next, - struct spi_message, queue); - list_del_init(&drv_data->cur_msg->queue); - - /* Initial message state*/ - drv_data->cur_msg->state = START_STATE; - drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, - struct spi_transfer, - transfer_list); - - /* prepare to setup the SSP, in pump_transfers, using the per - * chip configuration */ - drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); - - /* Mark as busy and launch transfers */ - tasklet_schedule(&drv_data->pump_transfers); - - drv_data->busy = 1; - spin_unlock_irqrestore(&drv_data->lock, flags); -} - -static int transfer(struct spi_device *spi, struct spi_message *msg) -{ - struct driver_data *drv_data = spi_master_get_devdata(spi->master); - unsigned long flags; - - spin_lock_irqsave(&drv_data->lock, flags); - - if (drv_data->run == QUEUE_STOPPED) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return -ESHUTDOWN; - } - - msg->actual_length = 0; - msg->status = -EINPROGRESS; - msg->state = START_STATE; - - list_add_tail(&msg->queue, &drv_data->queue); - - if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) - queue_work(drv_data->workqueue, &drv_data->pump_messages); - - spin_unlock_irqrestore(&drv_data->lock, flags); - - return 0; -} - -static int setup_cs(struct spi_device *spi, struct chip_data *chip, - struct pxa2xx_spi_chip *chip_info) -{ - int err = 0; - - if (chip == NULL || chip_info == NULL) - return 0; - - /* NOTE: setup() can be called multiple times, possibly with - * different chip_info, release previously requested GPIO - */ - if (gpio_is_valid(chip->gpio_cs)) - gpio_free(chip->gpio_cs); - - /* If (*cs_control) is provided, ignore GPIO chip select */ - if (chip_info->cs_control) { - chip->cs_control = chip_info->cs_control; - return 0; - } - - if (gpio_is_valid(chip_info->gpio_cs)) { - err = gpio_request(chip_info->gpio_cs, "SPI_CS"); - if (err) { - dev_err(&spi->dev, "failed to request chip select " - "GPIO%d\n", chip_info->gpio_cs); - return err; - } - - chip->gpio_cs = chip_info->gpio_cs; - chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH; - - err = gpio_direction_output(chip->gpio_cs, - !chip->gpio_cs_inverted); - } - - return err; -} - -static int setup(struct spi_device *spi) -{ - struct pxa2xx_spi_chip *chip_info = NULL; - struct chip_data *chip; - struct driver_data *drv_data = spi_master_get_devdata(spi->master); - struct ssp_device *ssp = drv_data->ssp; - unsigned int clk_div; - uint tx_thres = TX_THRESH_DFLT; - uint rx_thres = RX_THRESH_DFLT; - - if (!pxa25x_ssp_comp(drv_data) - && (spi->bits_per_word < 4 || spi->bits_per_word > 32)) { - dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d " - "b/w not 4-32 for type non-PXA25x_SSP\n", - drv_data->ssp_type, spi->bits_per_word); - return -EINVAL; - } else if (pxa25x_ssp_comp(drv_data) - && (spi->bits_per_word < 4 - || spi->bits_per_word > 16)) { - dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d " - "b/w not 4-16 for type PXA25x_SSP\n", - drv_data->ssp_type, spi->bits_per_word); - return -EINVAL; - } - - /* Only alloc on first setup */ - chip = spi_get_ctldata(spi); - if (!chip) { - chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); - if (!chip) { - dev_err(&spi->dev, - "failed setup: can't allocate chip data\n"); - return -ENOMEM; - } - - if (drv_data->ssp_type == CE4100_SSP) { - if (spi->chip_select > 4) { - dev_err(&spi->dev, "failed setup: " - "cs number must not be > 4.\n"); - kfree(chip); - return -EINVAL; - } - - chip->frm = spi->chip_select; - } else - chip->gpio_cs = -1; - chip->enable_dma = 0; - chip->timeout = TIMOUT_DFLT; - chip->dma_burst_size = drv_data->master_info->enable_dma ? - DCMD_BURST8 : 0; - } - - /* protocol drivers may change the chip settings, so... - * if chip_info exists, use it */ - chip_info = spi->controller_data; - - /* chip_info isn't always needed */ - chip->cr1 = 0; - if (chip_info) { - if (chip_info->timeout) - chip->timeout = chip_info->timeout; - if (chip_info->tx_threshold) - tx_thres = chip_info->tx_threshold; - if (chip_info->rx_threshold) - rx_thres = chip_info->rx_threshold; - chip->enable_dma = drv_data->master_info->enable_dma; - chip->dma_threshold = 0; - if (chip_info->enable_loopback) - chip->cr1 = SSCR1_LBM; - } - - chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) | - (SSCR1_TxTresh(tx_thres) & SSCR1_TFT); - - /* set dma burst and threshold outside of chip_info path so that if - * chip_info goes away after setting chip->enable_dma, the - * burst and threshold can still respond to changes in bits_per_word */ - if (chip->enable_dma) { - /* set up legal burst and threshold for dma */ - if (set_dma_burst_and_threshold(chip, spi, spi->bits_per_word, - &chip->dma_burst_size, - &chip->dma_threshold)) { - dev_warn(&spi->dev, "in setup: DMA burst size reduced " - "to match bits_per_word\n"); - } - } - - clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz); - chip->speed_hz = spi->max_speed_hz; - - chip->cr0 = clk_div - | SSCR0_Motorola - | SSCR0_DataSize(spi->bits_per_word > 16 ? - spi->bits_per_word - 16 : spi->bits_per_word) - | SSCR0_SSE - | (spi->bits_per_word > 16 ? SSCR0_EDSS : 0); - chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH); - chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0) - | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0); - - /* NOTE: PXA25x_SSP _could_ use external clocking ... */ - if (!pxa25x_ssp_comp(drv_data)) - dev_dbg(&spi->dev, "%ld Hz actual, %s\n", - clk_get_rate(ssp->clk) - / (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)), - chip->enable_dma ? "DMA" : "PIO"); - else - dev_dbg(&spi->dev, "%ld Hz actual, %s\n", - clk_get_rate(ssp->clk) / 2 - / (1 + ((chip->cr0 & SSCR0_SCR(0x0ff)) >> 8)), - chip->enable_dma ? "DMA" : "PIO"); - - if (spi->bits_per_word <= 8) { - chip->n_bytes = 1; - chip->dma_width = DCMD_WIDTH1; - chip->read = u8_reader; - chip->write = u8_writer; - } else if (spi->bits_per_word <= 16) { - chip->n_bytes = 2; - chip->dma_width = DCMD_WIDTH2; - chip->read = u16_reader; - chip->write = u16_writer; - } else if (spi->bits_per_word <= 32) { - chip->cr0 |= SSCR0_EDSS; - chip->n_bytes = 4; - chip->dma_width = DCMD_WIDTH4; - chip->read = u32_reader; - chip->write = u32_writer; - } else { - dev_err(&spi->dev, "invalid wordsize\n"); - return -ENODEV; - } - chip->bits_per_word = spi->bits_per_word; - - spi_set_ctldata(spi, chip); - - if (drv_data->ssp_type == CE4100_SSP) - return 0; - - return setup_cs(spi, chip, chip_info); -} - -static void cleanup(struct spi_device *spi) -{ - struct chip_data *chip = spi_get_ctldata(spi); - struct driver_data *drv_data = spi_master_get_devdata(spi->master); - - if (!chip) - return; - - if (drv_data->ssp_type != CE4100_SSP && gpio_is_valid(chip->gpio_cs)) - gpio_free(chip->gpio_cs); - - kfree(chip); -} - -static int __devinit init_queue(struct driver_data *drv_data) -{ - INIT_LIST_HEAD(&drv_data->queue); - spin_lock_init(&drv_data->lock); - - drv_data->run = QUEUE_STOPPED; - drv_data->busy = 0; - - tasklet_init(&drv_data->pump_transfers, - pump_transfers, (unsigned long)drv_data); - - INIT_WORK(&drv_data->pump_messages, pump_messages); - drv_data->workqueue = create_singlethread_workqueue( - dev_name(drv_data->master->dev.parent)); - if (drv_data->workqueue == NULL) - return -EBUSY; - - return 0; -} - -static int start_queue(struct driver_data *drv_data) -{ - unsigned long flags; - - spin_lock_irqsave(&drv_data->lock, flags); - - if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return -EBUSY; - } - - drv_data->run = QUEUE_RUNNING; - drv_data->cur_msg = NULL; - drv_data->cur_transfer = NULL; - drv_data->cur_chip = NULL; - spin_unlock_irqrestore(&drv_data->lock, flags); - - queue_work(drv_data->workqueue, &drv_data->pump_messages); - - return 0; -} - -static int stop_queue(struct driver_data *drv_data) -{ - unsigned long flags; - unsigned limit = 500; - int status = 0; - - spin_lock_irqsave(&drv_data->lock, flags); - - /* This is a bit lame, but is optimized for the common execution path. - * A wait_queue on the drv_data->busy could be used, but then the common - * execution path (pump_messages) would be required to call wake_up or - * friends on every SPI message. Do this instead */ - drv_data->run = QUEUE_STOPPED; - while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) { - spin_unlock_irqrestore(&drv_data->lock, flags); - msleep(10); - spin_lock_irqsave(&drv_data->lock, flags); - } - - if (!list_empty(&drv_data->queue) || drv_data->busy) - status = -EBUSY; - - spin_unlock_irqrestore(&drv_data->lock, flags); - - return status; -} - -static int destroy_queue(struct driver_data *drv_data) -{ - int status; - - status = stop_queue(drv_data); - /* we are unloading the module or failing to load (only two calls - * to this routine), and neither call can handle a return value. - * However, destroy_workqueue calls flush_workqueue, and that will - * block until all work is done. If the reason that stop_queue - * timed out is that the work will never finish, then it does no - * good to call destroy_workqueue, so return anyway. */ - if (status != 0) - return status; - - destroy_workqueue(drv_data->workqueue); - - return 0; -} - -static int __devinit pxa2xx_spi_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct pxa2xx_spi_master *platform_info; - struct spi_master *master; - struct driver_data *drv_data; - struct ssp_device *ssp; - int status; - - platform_info = dev->platform_data; - - ssp = pxa_ssp_request(pdev->id, pdev->name); - if (ssp == NULL) { - dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id); - return -ENODEV; - } - - /* Allocate master with space for drv_data and null dma buffer */ - master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); - if (!master) { - dev_err(&pdev->dev, "cannot alloc spi_master\n"); - pxa_ssp_free(ssp); - return -ENOMEM; - } - drv_data = spi_master_get_devdata(master); - drv_data->master = master; - drv_data->master_info = platform_info; - drv_data->pdev = pdev; - drv_data->ssp = ssp; - - master->dev.parent = &pdev->dev; - master->dev.of_node = pdev->dev.of_node; - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - - master->bus_num = pdev->id; - master->num_chipselect = platform_info->num_chipselect; - master->dma_alignment = DMA_ALIGNMENT; - master->cleanup = cleanup; - master->setup = setup; - master->transfer = transfer; - - drv_data->ssp_type = ssp->type; - drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data + - sizeof(struct driver_data)), 8); - - drv_data->ioaddr = ssp->mmio_base; - drv_data->ssdr_physical = ssp->phys_base + SSDR; - if (pxa25x_ssp_comp(drv_data)) { - drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE; - drv_data->dma_cr1 = 0; - drv_data->clear_sr = SSSR_ROR; - drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR; - } else { - drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE; - drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE; - drv_data->clear_sr = SSSR_ROR | SSSR_TINT; - drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR; - } - - status = request_irq(ssp->irq, ssp_int, IRQF_SHARED, dev_name(dev), - drv_data); - if (status < 0) { - dev_err(&pdev->dev, "cannot get IRQ %d\n", ssp->irq); - goto out_error_master_alloc; - } - - /* Setup DMA if requested */ - drv_data->tx_channel = -1; - drv_data->rx_channel = -1; - if (platform_info->enable_dma) { - - /* Get two DMA channels (rx and tx) */ - drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx", - DMA_PRIO_HIGH, - dma_handler, - drv_data); - if (drv_data->rx_channel < 0) { - dev_err(dev, "problem (%d) requesting rx channel\n", - drv_data->rx_channel); - status = -ENODEV; - goto out_error_irq_alloc; - } - drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx", - DMA_PRIO_MEDIUM, - dma_handler, - drv_data); - if (drv_data->tx_channel < 0) { - dev_err(dev, "problem (%d) requesting tx channel\n", - drv_data->tx_channel); - status = -ENODEV; - goto out_error_dma_alloc; - } - - DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel; - DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel; - } - - /* Enable SOC clock */ - clk_enable(ssp->clk); - - /* Load default SSP configuration */ - write_SSCR0(0, drv_data->ioaddr); - write_SSCR1(SSCR1_RxTresh(RX_THRESH_DFLT) | - SSCR1_TxTresh(TX_THRESH_DFLT), - drv_data->ioaddr); - write_SSCR0(SSCR0_SCR(2) - | SSCR0_Motorola - | SSCR0_DataSize(8), - drv_data->ioaddr); - if (!pxa25x_ssp_comp(drv_data)) - write_SSTO(0, drv_data->ioaddr); - write_SSPSP(0, drv_data->ioaddr); - - /* Initial and start queue */ - status = init_queue(drv_data); - if (status != 0) { - dev_err(&pdev->dev, "problem initializing queue\n"); - goto out_error_clock_enabled; - } - status = start_queue(drv_data); - if (status != 0) { - dev_err(&pdev->dev, "problem starting queue\n"); - goto out_error_clock_enabled; - } - - /* Register with the SPI framework */ - platform_set_drvdata(pdev, drv_data); - status = spi_register_master(master); - if (status != 0) { - dev_err(&pdev->dev, "problem registering spi master\n"); - goto out_error_queue_alloc; - } - - return status; - -out_error_queue_alloc: - destroy_queue(drv_data); - -out_error_clock_enabled: - clk_disable(ssp->clk); - -out_error_dma_alloc: - if (drv_data->tx_channel != -1) - pxa_free_dma(drv_data->tx_channel); - if (drv_data->rx_channel != -1) - pxa_free_dma(drv_data->rx_channel); - -out_error_irq_alloc: - free_irq(ssp->irq, drv_data); - -out_error_master_alloc: - spi_master_put(master); - pxa_ssp_free(ssp); - return status; -} - -static int pxa2xx_spi_remove(struct platform_device *pdev) -{ - struct driver_data *drv_data = platform_get_drvdata(pdev); - struct ssp_device *ssp; - int status = 0; - - if (!drv_data) - return 0; - ssp = drv_data->ssp; - - /* Remove the queue */ - status = destroy_queue(drv_data); - if (status != 0) - /* the kernel does not check the return status of this - * this routine (mod->exit, within the kernel). Therefore - * nothing is gained by returning from here, the module is - * going away regardless, and we should not leave any more - * resources allocated than necessary. We cannot free the - * message memory in drv_data->queue, but we can release the - * resources below. I think the kernel should honor -EBUSY - * returns but... */ - dev_err(&pdev->dev, "pxa2xx_spi_remove: workqueue will not " - "complete, message memory not freed\n"); - - /* Disable the SSP at the peripheral and SOC level */ - write_SSCR0(0, drv_data->ioaddr); - clk_disable(ssp->clk); - - /* Release DMA */ - if (drv_data->master_info->enable_dma) { - DRCMR(ssp->drcmr_rx) = 0; - DRCMR(ssp->drcmr_tx) = 0; - pxa_free_dma(drv_data->tx_channel); - pxa_free_dma(drv_data->rx_channel); - } - - /* Release IRQ */ - free_irq(ssp->irq, drv_data); - - /* Release SSP */ - pxa_ssp_free(ssp); - - /* Disconnect from the SPI framework */ - spi_unregister_master(drv_data->master); - - /* Prevent double remove */ - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static void pxa2xx_spi_shutdown(struct platform_device *pdev) -{ - int status = 0; - - if ((status = pxa2xx_spi_remove(pdev)) != 0) - dev_err(&pdev->dev, "shutdown failed with %d\n", status); -} - -#ifdef CONFIG_PM -static int pxa2xx_spi_suspend(struct device *dev) -{ - struct driver_data *drv_data = dev_get_drvdata(dev); - struct ssp_device *ssp = drv_data->ssp; - int status = 0; - - status = stop_queue(drv_data); - if (status != 0) - return status; - write_SSCR0(0, drv_data->ioaddr); - clk_disable(ssp->clk); - - return 0; -} - -static int pxa2xx_spi_resume(struct device *dev) -{ - struct driver_data *drv_data = dev_get_drvdata(dev); - struct ssp_device *ssp = drv_data->ssp; - int status = 0; - - if (drv_data->rx_channel != -1) - DRCMR(drv_data->ssp->drcmr_rx) = - DRCMR_MAPVLD | drv_data->rx_channel; - if (drv_data->tx_channel != -1) - DRCMR(drv_data->ssp->drcmr_tx) = - DRCMR_MAPVLD | drv_data->tx_channel; - - /* Enable the SSP clock */ - clk_enable(ssp->clk); - - /* Start the queue running */ - status = start_queue(drv_data); - if (status != 0) { - dev_err(dev, "problem starting queue (%d)\n", status); - return status; - } - - return 0; -} - -static const struct dev_pm_ops pxa2xx_spi_pm_ops = { - .suspend = pxa2xx_spi_suspend, - .resume = pxa2xx_spi_resume, -}; -#endif - -static struct platform_driver driver = { - .driver = { - .name = "pxa2xx-spi", - .owner = THIS_MODULE, -#ifdef CONFIG_PM - .pm = &pxa2xx_spi_pm_ops, -#endif - }, - .probe = pxa2xx_spi_probe, - .remove = pxa2xx_spi_remove, - .shutdown = pxa2xx_spi_shutdown, -}; - -static int __init pxa2xx_spi_init(void) -{ - return platform_driver_register(&driver); -} -subsys_initcall(pxa2xx_spi_init); - -static void __exit pxa2xx_spi_exit(void) -{ - platform_driver_unregister(&driver); -} -module_exit(pxa2xx_spi_exit); diff --git a/drivers/spi/pxa2xx_spi_pci.c b/drivers/spi/pxa2xx_spi_pci.c deleted file mode 100644 index 378e504f89eb..000000000000 --- a/drivers/spi/pxa2xx_spi_pci.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * CE4100's SPI device is more or less the same one as found on PXA - * - */ -#include -#include -#include -#include - -struct ce4100_info { - struct ssp_device ssp; - struct platform_device *spi_pdev; -}; - -static DEFINE_MUTEX(ssp_lock); -static LIST_HEAD(ssp_list); - -struct ssp_device *pxa_ssp_request(int port, const char *label) -{ - struct ssp_device *ssp = NULL; - - mutex_lock(&ssp_lock); - - list_for_each_entry(ssp, &ssp_list, node) { - if (ssp->port_id == port && ssp->use_count == 0) { - ssp->use_count++; - ssp->label = label; - break; - } - } - - mutex_unlock(&ssp_lock); - - if (&ssp->node == &ssp_list) - return NULL; - - return ssp; -} -EXPORT_SYMBOL_GPL(pxa_ssp_request); - -void pxa_ssp_free(struct ssp_device *ssp) -{ - mutex_lock(&ssp_lock); - if (ssp->use_count) { - ssp->use_count--; - ssp->label = NULL; - } else - dev_err(&ssp->pdev->dev, "device already free\n"); - mutex_unlock(&ssp_lock); -} -EXPORT_SYMBOL_GPL(pxa_ssp_free); - -static int __devinit ce4100_spi_probe(struct pci_dev *dev, - const struct pci_device_id *ent) -{ - int ret; - resource_size_t phys_beg; - resource_size_t phys_len; - struct ce4100_info *spi_info; - struct platform_device *pdev; - struct pxa2xx_spi_master spi_pdata; - struct ssp_device *ssp; - - ret = pci_enable_device(dev); - if (ret) - return ret; - - phys_beg = pci_resource_start(dev, 0); - phys_len = pci_resource_len(dev, 0); - - if (!request_mem_region(phys_beg, phys_len, - "CE4100 SPI")) { - dev_err(&dev->dev, "Can't request register space.\n"); - ret = -EBUSY; - return ret; - } - - pdev = platform_device_alloc("pxa2xx-spi", dev->devfn); - spi_info = kzalloc(sizeof(*spi_info), GFP_KERNEL); - if (!pdev || !spi_info ) { - ret = -ENOMEM; - goto err_nomem; - } - memset(&spi_pdata, 0, sizeof(spi_pdata)); - spi_pdata.num_chipselect = dev->devfn; - - ret = platform_device_add_data(pdev, &spi_pdata, sizeof(spi_pdata)); - if (ret) - goto err_nomem; - - pdev->dev.parent = &dev->dev; - pdev->dev.of_node = dev->dev.of_node; - ssp = &spi_info->ssp; - ssp->phys_base = pci_resource_start(dev, 0); - ssp->mmio_base = ioremap(phys_beg, phys_len); - if (!ssp->mmio_base) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); - ret = -EIO; - goto err_nomem; - } - ssp->irq = dev->irq; - ssp->port_id = pdev->id; - ssp->type = PXA25x_SSP; - - mutex_lock(&ssp_lock); - list_add(&ssp->node, &ssp_list); - mutex_unlock(&ssp_lock); - - pci_set_drvdata(dev, spi_info); - - ret = platform_device_add(pdev); - if (ret) - goto err_dev_add; - - return ret; - -err_dev_add: - pci_set_drvdata(dev, NULL); - mutex_lock(&ssp_lock); - list_del(&ssp->node); - mutex_unlock(&ssp_lock); - iounmap(ssp->mmio_base); - -err_nomem: - release_mem_region(phys_beg, phys_len); - platform_device_put(pdev); - kfree(spi_info); - return ret; -} - -static void __devexit ce4100_spi_remove(struct pci_dev *dev) -{ - struct ce4100_info *spi_info; - struct ssp_device *ssp; - - spi_info = pci_get_drvdata(dev); - ssp = &spi_info->ssp; - platform_device_unregister(spi_info->spi_pdev); - - iounmap(ssp->mmio_base); - release_mem_region(pci_resource_start(dev, 0), - pci_resource_len(dev, 0)); - - mutex_lock(&ssp_lock); - list_del(&ssp->node); - mutex_unlock(&ssp_lock); - - pci_set_drvdata(dev, NULL); - pci_disable_device(dev); - kfree(spi_info); -} - -static struct pci_device_id ce4100_spi_devices[] __devinitdata = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e6a) }, - { }, -}; -MODULE_DEVICE_TABLE(pci, ce4100_spi_devices); - -static struct pci_driver ce4100_spi_driver = { - .name = "ce4100_spi", - .id_table = ce4100_spi_devices, - .probe = ce4100_spi_probe, - .remove = __devexit_p(ce4100_spi_remove), -}; - -static int __init ce4100_spi_init(void) -{ - return pci_register_driver(&ce4100_spi_driver); -} -module_init(ce4100_spi_init); - -static void __exit ce4100_spi_exit(void) -{ - pci_unregister_driver(&ce4100_spi_driver); -} -module_exit(ce4100_spi_exit); - -MODULE_DESCRIPTION("CE4100 PCI-SPI glue code for PXA's driver"); -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Sebastian Andrzej Siewior "); diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c new file mode 100644 index 000000000000..4813a63ce6fb --- /dev/null +++ b/drivers/spi/spi-altera.c @@ -0,0 +1,339 @@ +/* + * Altera SPI driver + * + * Copyright (C) 2008 Thomas Chou + * + * Based on spi_s3c24xx.c, which is: + * Copyright (c) 2006 Ben Dooks + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "spi_altera" + +#define ALTERA_SPI_RXDATA 0 +#define ALTERA_SPI_TXDATA 4 +#define ALTERA_SPI_STATUS 8 +#define ALTERA_SPI_CONTROL 12 +#define ALTERA_SPI_SLAVE_SEL 20 + +#define ALTERA_SPI_STATUS_ROE_MSK 0x8 +#define ALTERA_SPI_STATUS_TOE_MSK 0x10 +#define ALTERA_SPI_STATUS_TMT_MSK 0x20 +#define ALTERA_SPI_STATUS_TRDY_MSK 0x40 +#define ALTERA_SPI_STATUS_RRDY_MSK 0x80 +#define ALTERA_SPI_STATUS_E_MSK 0x100 + +#define ALTERA_SPI_CONTROL_IROE_MSK 0x8 +#define ALTERA_SPI_CONTROL_ITOE_MSK 0x10 +#define ALTERA_SPI_CONTROL_ITRDY_MSK 0x40 +#define ALTERA_SPI_CONTROL_IRRDY_MSK 0x80 +#define ALTERA_SPI_CONTROL_IE_MSK 0x100 +#define ALTERA_SPI_CONTROL_SSO_MSK 0x400 + +struct altera_spi { + /* bitbang has to be first */ + struct spi_bitbang bitbang; + struct completion done; + + void __iomem *base; + int irq; + int len; + int count; + int bytes_per_word; + unsigned long imr; + + /* data buffers */ + const unsigned char *tx; + unsigned char *rx; +}; + +static inline struct altera_spi *altera_spi_to_hw(struct spi_device *sdev) +{ + return spi_master_get_devdata(sdev->master); +} + +static void altera_spi_chipsel(struct spi_device *spi, int value) +{ + struct altera_spi *hw = altera_spi_to_hw(spi); + + if (spi->mode & SPI_CS_HIGH) { + switch (value) { + case BITBANG_CS_INACTIVE: + writel(1 << spi->chip_select, + hw->base + ALTERA_SPI_SLAVE_SEL); + hw->imr |= ALTERA_SPI_CONTROL_SSO_MSK; + writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + break; + + case BITBANG_CS_ACTIVE: + hw->imr &= ~ALTERA_SPI_CONTROL_SSO_MSK; + writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + writel(0, hw->base + ALTERA_SPI_SLAVE_SEL); + break; + } + } else { + switch (value) { + case BITBANG_CS_INACTIVE: + hw->imr &= ~ALTERA_SPI_CONTROL_SSO_MSK; + writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + break; + + case BITBANG_CS_ACTIVE: + writel(1 << spi->chip_select, + hw->base + ALTERA_SPI_SLAVE_SEL); + hw->imr |= ALTERA_SPI_CONTROL_SSO_MSK; + writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + break; + } + } +} + +static int altera_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t) +{ + return 0; +} + +static int altera_spi_setup(struct spi_device *spi) +{ + return 0; +} + +static inline unsigned int hw_txbyte(struct altera_spi *hw, int count) +{ + if (hw->tx) { + switch (hw->bytes_per_word) { + case 1: + return hw->tx[count]; + case 2: + return (hw->tx[count * 2] + | (hw->tx[count * 2 + 1] << 8)); + } + } + return 0; +} + +static int altera_spi_txrx(struct spi_device *spi, struct spi_transfer *t) +{ + struct altera_spi *hw = altera_spi_to_hw(spi); + + hw->tx = t->tx_buf; + hw->rx = t->rx_buf; + hw->count = 0; + hw->bytes_per_word = (t->bits_per_word ? : spi->bits_per_word) / 8; + hw->len = t->len / hw->bytes_per_word; + + if (hw->irq >= 0) { + /* enable receive interrupt */ + hw->imr |= ALTERA_SPI_CONTROL_IRRDY_MSK; + writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + + /* send the first byte */ + writel(hw_txbyte(hw, 0), hw->base + ALTERA_SPI_TXDATA); + + wait_for_completion(&hw->done); + /* disable receive interrupt */ + hw->imr &= ~ALTERA_SPI_CONTROL_IRRDY_MSK; + writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + } else { + /* send the first byte */ + writel(hw_txbyte(hw, 0), hw->base + ALTERA_SPI_TXDATA); + + while (1) { + unsigned int rxd; + + while (!(readl(hw->base + ALTERA_SPI_STATUS) & + ALTERA_SPI_STATUS_RRDY_MSK)) + cpu_relax(); + + rxd = readl(hw->base + ALTERA_SPI_RXDATA); + if (hw->rx) { + switch (hw->bytes_per_word) { + case 1: + hw->rx[hw->count] = rxd; + break; + case 2: + hw->rx[hw->count * 2] = rxd; + hw->rx[hw->count * 2 + 1] = rxd >> 8; + break; + } + } + + hw->count++; + + if (hw->count < hw->len) + writel(hw_txbyte(hw, hw->count), + hw->base + ALTERA_SPI_TXDATA); + else + break; + } + + } + + return hw->count * hw->bytes_per_word; +} + +static irqreturn_t altera_spi_irq(int irq, void *dev) +{ + struct altera_spi *hw = dev; + unsigned int rxd; + + rxd = readl(hw->base + ALTERA_SPI_RXDATA); + if (hw->rx) { + switch (hw->bytes_per_word) { + case 1: + hw->rx[hw->count] = rxd; + break; + case 2: + hw->rx[hw->count * 2] = rxd; + hw->rx[hw->count * 2 + 1] = rxd >> 8; + break; + } + } + + hw->count++; + + if (hw->count < hw->len) + writel(hw_txbyte(hw, hw->count), hw->base + ALTERA_SPI_TXDATA); + else + complete(&hw->done); + + return IRQ_HANDLED; +} + +static int __devinit altera_spi_probe(struct platform_device *pdev) +{ + struct altera_spi_platform_data *platp = pdev->dev.platform_data; + struct altera_spi *hw; + struct spi_master *master; + struct resource *res; + int err = -ENODEV; + + master = spi_alloc_master(&pdev->dev, sizeof(struct altera_spi)); + if (!master) + return err; + + /* setup the master state. */ + master->bus_num = pdev->id; + master->num_chipselect = 16; + master->mode_bits = SPI_CS_HIGH; + master->setup = altera_spi_setup; + + hw = spi_master_get_devdata(master); + platform_set_drvdata(pdev, hw); + + /* setup the state for the bitbang driver */ + hw->bitbang.master = spi_master_get(master); + if (!hw->bitbang.master) + return err; + hw->bitbang.setup_transfer = altera_spi_setupxfer; + hw->bitbang.chipselect = altera_spi_chipsel; + hw->bitbang.txrx_bufs = altera_spi_txrx; + + /* find and map our resources */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + goto exit_busy; + if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), + pdev->name)) + goto exit_busy; + hw->base = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!hw->base) + goto exit_busy; + /* program defaults into the registers */ + hw->imr = 0; /* disable spi interrupts */ + writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + writel(0, hw->base + ALTERA_SPI_STATUS); /* clear status reg */ + if (readl(hw->base + ALTERA_SPI_STATUS) & ALTERA_SPI_STATUS_RRDY_MSK) + readl(hw->base + ALTERA_SPI_RXDATA); /* flush rxdata */ + /* irq is optional */ + hw->irq = platform_get_irq(pdev, 0); + if (hw->irq >= 0) { + init_completion(&hw->done); + err = devm_request_irq(&pdev->dev, hw->irq, altera_spi_irq, 0, + pdev->name, hw); + if (err) + goto exit; + } + /* find platform data */ + if (!platp) + hw->bitbang.master->dev.of_node = pdev->dev.of_node; + + /* register our spi controller */ + err = spi_bitbang_start(&hw->bitbang); + if (err) + goto exit; + dev_info(&pdev->dev, "base %p, irq %d\n", hw->base, hw->irq); + + return 0; + +exit_busy: + err = -EBUSY; +exit: + platform_set_drvdata(pdev, NULL); + spi_master_put(master); + return err; +} + +static int __devexit altera_spi_remove(struct platform_device *dev) +{ + struct altera_spi *hw = platform_get_drvdata(dev); + struct spi_master *master = hw->bitbang.master; + + spi_bitbang_stop(&hw->bitbang); + platform_set_drvdata(dev, NULL); + spi_master_put(master); + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id altera_spi_match[] = { + { .compatible = "ALTR,spi-1.0", }, + {}, +}; +MODULE_DEVICE_TABLE(of, altera_spi_match); +#else /* CONFIG_OF */ +#define altera_spi_match NULL +#endif /* CONFIG_OF */ + +static struct platform_driver altera_spi_driver = { + .probe = altera_spi_probe, + .remove = __devexit_p(altera_spi_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .pm = NULL, + .of_match_table = altera_spi_match, + }, +}; + +static int __init altera_spi_init(void) +{ + return platform_driver_register(&altera_spi_driver); +} +module_init(altera_spi_init); + +static void __exit altera_spi_exit(void) +{ + platform_driver_unregister(&altera_spi_driver); +} +module_exit(altera_spi_exit); + +MODULE_DESCRIPTION("Altera SPI driver"); +MODULE_AUTHOR("Thomas Chou "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c new file mode 100644 index 000000000000..fcff810ea3b0 --- /dev/null +++ b/drivers/spi/spi-ath79.c @@ -0,0 +1,292 @@ +/* + * SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs + * + * Copyright (C) 2009-2011 Gabor Juhos + * + * This driver has been based on the spi-gpio.c: + * Copyright (C) 2006,2008 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DRV_NAME "ath79-spi" + +struct ath79_spi { + struct spi_bitbang bitbang; + u32 ioc_base; + u32 reg_ctrl; + void __iomem *base; +}; + +static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg) +{ + return ioread32(sp->base + reg); +} + +static inline void ath79_spi_wr(struct ath79_spi *sp, unsigned reg, u32 val) +{ + iowrite32(val, sp->base + reg); +} + +static inline struct ath79_spi *ath79_spidev_to_sp(struct spi_device *spi) +{ + return spi_master_get_devdata(spi->master); +} + +static void ath79_spi_chipselect(struct spi_device *spi, int is_active) +{ + struct ath79_spi *sp = ath79_spidev_to_sp(spi); + int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active; + + if (is_active) { + /* set initial clock polarity */ + if (spi->mode & SPI_CPOL) + sp->ioc_base |= AR71XX_SPI_IOC_CLK; + else + sp->ioc_base &= ~AR71XX_SPI_IOC_CLK; + + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); + } + + if (spi->chip_select) { + struct ath79_spi_controller_data *cdata = spi->controller_data; + + /* SPI is normally active-low */ + gpio_set_value(cdata->gpio, cs_high); + } else { + if (cs_high) + sp->ioc_base |= AR71XX_SPI_IOC_CS0; + else + sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; + + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); + } + +} + +static int ath79_spi_setup_cs(struct spi_device *spi) +{ + struct ath79_spi *sp = ath79_spidev_to_sp(spi); + struct ath79_spi_controller_data *cdata; + + cdata = spi->controller_data; + if (spi->chip_select && !cdata) + return -EINVAL; + + /* enable GPIO mode */ + ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO); + + /* save CTRL register */ + sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL); + sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC); + + /* TODO: setup speed? */ + ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); + + if (spi->chip_select) { + int status = 0; + + status = gpio_request(cdata->gpio, dev_name(&spi->dev)); + if (status) + return status; + + status = gpio_direction_output(cdata->gpio, + spi->mode & SPI_CS_HIGH); + if (status) { + gpio_free(cdata->gpio); + return status; + } + } else { + if (spi->mode & SPI_CS_HIGH) + sp->ioc_base |= AR71XX_SPI_IOC_CS0; + else + sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); + } + + return 0; +} + +static void ath79_spi_cleanup_cs(struct spi_device *spi) +{ + struct ath79_spi *sp = ath79_spidev_to_sp(spi); + + if (spi->chip_select) { + struct ath79_spi_controller_data *cdata = spi->controller_data; + gpio_free(cdata->gpio); + } + + /* restore CTRL register */ + ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl); + /* disable GPIO mode */ + ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); +} + +static int ath79_spi_setup(struct spi_device *spi) +{ + int status = 0; + + if (spi->bits_per_word > 32) + return -EINVAL; + + if (!spi->controller_state) { + status = ath79_spi_setup_cs(spi); + if (status) + return status; + } + + status = spi_bitbang_setup(spi); + if (status && !spi->controller_state) + ath79_spi_cleanup_cs(spi); + + return status; +} + +static void ath79_spi_cleanup(struct spi_device *spi) +{ + ath79_spi_cleanup_cs(spi); + spi_bitbang_cleanup(spi); +} + +static u32 ath79_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs, + u32 word, u8 bits) +{ + struct ath79_spi *sp = ath79_spidev_to_sp(spi); + u32 ioc = sp->ioc_base; + + /* clock starts at inactive polarity */ + for (word <<= (32 - bits); likely(bits); bits--) { + u32 out; + + if (word & (1 << 31)) + out = ioc | AR71XX_SPI_IOC_DO; + else + out = ioc & ~AR71XX_SPI_IOC_DO; + + /* setup MSB (to slave) on trailing edge */ + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out); + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK); + + word <<= 1; + } + + return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS); +} + +static __devinit int ath79_spi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct ath79_spi *sp; + struct ath79_spi_platform_data *pdata; + struct resource *r; + int ret; + + master = spi_alloc_master(&pdev->dev, sizeof(*sp)); + if (master == NULL) { + dev_err(&pdev->dev, "failed to allocate spi master\n"); + return -ENOMEM; + } + + sp = spi_master_get_devdata(master); + platform_set_drvdata(pdev, sp); + + pdata = pdev->dev.platform_data; + + master->setup = ath79_spi_setup; + master->cleanup = ath79_spi_cleanup; + if (pdata) { + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->num_chipselect; + } else { + master->bus_num = -1; + master->num_chipselect = 1; + } + + sp->bitbang.master = spi_master_get(master); + sp->bitbang.chipselect = ath79_spi_chipselect; + sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0; + sp->bitbang.setup_transfer = spi_bitbang_setup_transfer; + sp->bitbang.flags = SPI_CS_HIGH; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + ret = -ENOENT; + goto err_put_master; + } + + sp->base = ioremap(r->start, r->end - r->start + 1); + if (!sp->base) { + ret = -ENXIO; + goto err_put_master; + } + + ret = spi_bitbang_start(&sp->bitbang); + if (ret) + goto err_unmap; + + return 0; + +err_unmap: + iounmap(sp->base); +err_put_master: + platform_set_drvdata(pdev, NULL); + spi_master_put(sp->bitbang.master); + + return ret; +} + +static __devexit int ath79_spi_remove(struct platform_device *pdev) +{ + struct ath79_spi *sp = platform_get_drvdata(pdev); + + spi_bitbang_stop(&sp->bitbang); + iounmap(sp->base); + platform_set_drvdata(pdev, NULL); + spi_master_put(sp->bitbang.master); + + return 0; +} + +static struct platform_driver ath79_spi_driver = { + .probe = ath79_spi_probe, + .remove = __devexit_p(ath79_spi_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static __init int ath79_spi_init(void) +{ + return platform_driver_register(&ath79_spi_driver); +} +module_init(ath79_spi_init); + +static __exit void ath79_spi_exit(void) +{ + platform_driver_unregister(&ath79_spi_driver); +} +module_exit(ath79_spi_exit); + +MODULE_DESCRIPTION("SPI controller driver for Atheros AR71XX/AR724X/AR913X"); +MODULE_AUTHOR("Gabor Juhos "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c new file mode 100644 index 000000000000..82dee9a6c0de --- /dev/null +++ b/drivers/spi/spi-atmel.c @@ -0,0 +1,1093 @@ +/* + * Driver for Atmel AT32 and AT91 SPI Controllers + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* SPI register offsets */ +#define SPI_CR 0x0000 +#define SPI_MR 0x0004 +#define SPI_RDR 0x0008 +#define SPI_TDR 0x000c +#define SPI_SR 0x0010 +#define SPI_IER 0x0014 +#define SPI_IDR 0x0018 +#define SPI_IMR 0x001c +#define SPI_CSR0 0x0030 +#define SPI_CSR1 0x0034 +#define SPI_CSR2 0x0038 +#define SPI_CSR3 0x003c +#define SPI_RPR 0x0100 +#define SPI_RCR 0x0104 +#define SPI_TPR 0x0108 +#define SPI_TCR 0x010c +#define SPI_RNPR 0x0110 +#define SPI_RNCR 0x0114 +#define SPI_TNPR 0x0118 +#define SPI_TNCR 0x011c +#define SPI_PTCR 0x0120 +#define SPI_PTSR 0x0124 + +/* Bitfields in CR */ +#define SPI_SPIEN_OFFSET 0 +#define SPI_SPIEN_SIZE 1 +#define SPI_SPIDIS_OFFSET 1 +#define SPI_SPIDIS_SIZE 1 +#define SPI_SWRST_OFFSET 7 +#define SPI_SWRST_SIZE 1 +#define SPI_LASTXFER_OFFSET 24 +#define SPI_LASTXFER_SIZE 1 + +/* Bitfields in MR */ +#define SPI_MSTR_OFFSET 0 +#define SPI_MSTR_SIZE 1 +#define SPI_PS_OFFSET 1 +#define SPI_PS_SIZE 1 +#define SPI_PCSDEC_OFFSET 2 +#define SPI_PCSDEC_SIZE 1 +#define SPI_FDIV_OFFSET 3 +#define SPI_FDIV_SIZE 1 +#define SPI_MODFDIS_OFFSET 4 +#define SPI_MODFDIS_SIZE 1 +#define SPI_LLB_OFFSET 7 +#define SPI_LLB_SIZE 1 +#define SPI_PCS_OFFSET 16 +#define SPI_PCS_SIZE 4 +#define SPI_DLYBCS_OFFSET 24 +#define SPI_DLYBCS_SIZE 8 + +/* Bitfields in RDR */ +#define SPI_RD_OFFSET 0 +#define SPI_RD_SIZE 16 + +/* Bitfields in TDR */ +#define SPI_TD_OFFSET 0 +#define SPI_TD_SIZE 16 + +/* Bitfields in SR */ +#define SPI_RDRF_OFFSET 0 +#define SPI_RDRF_SIZE 1 +#define SPI_TDRE_OFFSET 1 +#define SPI_TDRE_SIZE 1 +#define SPI_MODF_OFFSET 2 +#define SPI_MODF_SIZE 1 +#define SPI_OVRES_OFFSET 3 +#define SPI_OVRES_SIZE 1 +#define SPI_ENDRX_OFFSET 4 +#define SPI_ENDRX_SIZE 1 +#define SPI_ENDTX_OFFSET 5 +#define SPI_ENDTX_SIZE 1 +#define SPI_RXBUFF_OFFSET 6 +#define SPI_RXBUFF_SIZE 1 +#define SPI_TXBUFE_OFFSET 7 +#define SPI_TXBUFE_SIZE 1 +#define SPI_NSSR_OFFSET 8 +#define SPI_NSSR_SIZE 1 +#define SPI_TXEMPTY_OFFSET 9 +#define SPI_TXEMPTY_SIZE 1 +#define SPI_SPIENS_OFFSET 16 +#define SPI_SPIENS_SIZE 1 + +/* Bitfields in CSR0 */ +#define SPI_CPOL_OFFSET 0 +#define SPI_CPOL_SIZE 1 +#define SPI_NCPHA_OFFSET 1 +#define SPI_NCPHA_SIZE 1 +#define SPI_CSAAT_OFFSET 3 +#define SPI_CSAAT_SIZE 1 +#define SPI_BITS_OFFSET 4 +#define SPI_BITS_SIZE 4 +#define SPI_SCBR_OFFSET 8 +#define SPI_SCBR_SIZE 8 +#define SPI_DLYBS_OFFSET 16 +#define SPI_DLYBS_SIZE 8 +#define SPI_DLYBCT_OFFSET 24 +#define SPI_DLYBCT_SIZE 8 + +/* Bitfields in RCR */ +#define SPI_RXCTR_OFFSET 0 +#define SPI_RXCTR_SIZE 16 + +/* Bitfields in TCR */ +#define SPI_TXCTR_OFFSET 0 +#define SPI_TXCTR_SIZE 16 + +/* Bitfields in RNCR */ +#define SPI_RXNCR_OFFSET 0 +#define SPI_RXNCR_SIZE 16 + +/* Bitfields in TNCR */ +#define SPI_TXNCR_OFFSET 0 +#define SPI_TXNCR_SIZE 16 + +/* Bitfields in PTCR */ +#define SPI_RXTEN_OFFSET 0 +#define SPI_RXTEN_SIZE 1 +#define SPI_RXTDIS_OFFSET 1 +#define SPI_RXTDIS_SIZE 1 +#define SPI_TXTEN_OFFSET 8 +#define SPI_TXTEN_SIZE 1 +#define SPI_TXTDIS_OFFSET 9 +#define SPI_TXTDIS_SIZE 1 + +/* Constants for BITS */ +#define SPI_BITS_8_BPT 0 +#define SPI_BITS_9_BPT 1 +#define SPI_BITS_10_BPT 2 +#define SPI_BITS_11_BPT 3 +#define SPI_BITS_12_BPT 4 +#define SPI_BITS_13_BPT 5 +#define SPI_BITS_14_BPT 6 +#define SPI_BITS_15_BPT 7 +#define SPI_BITS_16_BPT 8 + +/* Bit manipulation macros */ +#define SPI_BIT(name) \ + (1 << SPI_##name##_OFFSET) +#define SPI_BF(name,value) \ + (((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET) +#define SPI_BFEXT(name,value) \ + (((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1)) +#define SPI_BFINS(name,value,old) \ + ( ((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \ + | SPI_BF(name,value)) + +/* Register access macros */ +#define spi_readl(port,reg) \ + __raw_readl((port)->regs + SPI_##reg) +#define spi_writel(port,reg,value) \ + __raw_writel((value), (port)->regs + SPI_##reg) + + +/* + * The core SPI transfer engine just talks to a register bank to set up + * DMA transfers; transfer queue progress is driven by IRQs. The clock + * framework provides the base clock, subdivided for each spi_device. + */ +struct atmel_spi { + spinlock_t lock; + + void __iomem *regs; + int irq; + struct clk *clk; + struct platform_device *pdev; + struct spi_device *stay; + + u8 stopping; + struct list_head queue; + struct spi_transfer *current_transfer; + unsigned long current_remaining_bytes; + struct spi_transfer *next_transfer; + unsigned long next_remaining_bytes; + + void *buffer; + dma_addr_t buffer_dma; +}; + +/* Controller-specific per-slave state */ +struct atmel_spi_device { + unsigned int npcs_pin; + u32 csr; +}; + +#define BUFFER_SIZE PAGE_SIZE +#define INVALID_DMA_ADDRESS 0xffffffff + +/* + * Version 2 of the SPI controller has + * - CR.LASTXFER + * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero) + * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs) + * - SPI_CSRx.CSAAT + * - SPI_CSRx.SBCR allows faster clocking + * + * We can determine the controller version by reading the VERSION + * register, but I haven't checked that it exists on all chips, and + * this is cheaper anyway. + */ +static bool atmel_spi_is_v2(void) +{ + return !cpu_is_at91rm9200(); +} + +/* + * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby + * they assume that spi slave device state will not change on deselect, so + * that automagic deselection is OK. ("NPCSx rises if no data is to be + * transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer + * controllers have CSAAT and friends. + * + * Since the CSAAT functionality is a bit weird on newer controllers as + * well, we use GPIO to control nCSx pins on all controllers, updating + * MR.PCS to avoid confusing the controller. Using GPIOs also lets us + * support active-high chipselects despite the controller's belief that + * only active-low devices/systems exists. + * + * However, at91rm9200 has a second erratum whereby nCS0 doesn't work + * right when driven with GPIO. ("Mode Fault does not allow more than one + * Master on Chip Select 0.") No workaround exists for that ... so for + * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH, + * and (c) will trigger that first erratum in some cases. + * + * TODO: Test if the atmel_spi_is_v2() branch below works on + * AT91RM9200 if we use some other register than CSR0. However, don't + * do this unconditionally since AP7000 has an errata where the BITS + * field in CSR0 overrides all other CSRs. + */ + +static void cs_activate(struct atmel_spi *as, struct spi_device *spi) +{ + struct atmel_spi_device *asd = spi->controller_state; + unsigned active = spi->mode & SPI_CS_HIGH; + u32 mr; + + if (atmel_spi_is_v2()) { + /* + * Always use CSR0. This ensures that the clock + * switches to the correct idle polarity before we + * toggle the CS. + */ + spi_writel(as, CSR0, asd->csr); + spi_writel(as, MR, SPI_BF(PCS, 0x0e) | SPI_BIT(MODFDIS) + | SPI_BIT(MSTR)); + mr = spi_readl(as, MR); + gpio_set_value(asd->npcs_pin, active); + } else { + u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0; + int i; + u32 csr; + + /* Make sure clock polarity is correct */ + for (i = 0; i < spi->master->num_chipselect; i++) { + csr = spi_readl(as, CSR0 + 4 * i); + if ((csr ^ cpol) & SPI_BIT(CPOL)) + spi_writel(as, CSR0 + 4 * i, + csr ^ SPI_BIT(CPOL)); + } + + mr = spi_readl(as, MR); + mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr); + if (spi->chip_select != 0) + gpio_set_value(asd->npcs_pin, active); + spi_writel(as, MR, mr); + } + + dev_dbg(&spi->dev, "activate %u%s, mr %08x\n", + asd->npcs_pin, active ? " (high)" : "", + mr); +} + +static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi) +{ + struct atmel_spi_device *asd = spi->controller_state; + unsigned active = spi->mode & SPI_CS_HIGH; + u32 mr; + + /* only deactivate *this* device; sometimes transfers to + * another device may be active when this routine is called. + */ + mr = spi_readl(as, MR); + if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) { + mr = SPI_BFINS(PCS, 0xf, mr); + spi_writel(as, MR, mr); + } + + dev_dbg(&spi->dev, "DEactivate %u%s, mr %08x\n", + asd->npcs_pin, active ? " (low)" : "", + mr); + + if (atmel_spi_is_v2() || spi->chip_select != 0) + gpio_set_value(asd->npcs_pin, !active); +} + +static inline int atmel_spi_xfer_is_last(struct spi_message *msg, + struct spi_transfer *xfer) +{ + return msg->transfers.prev == &xfer->transfer_list; +} + +static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer) +{ + return xfer->delay_usecs == 0 && !xfer->cs_change; +} + +static void atmel_spi_next_xfer_data(struct spi_master *master, + struct spi_transfer *xfer, + dma_addr_t *tx_dma, + dma_addr_t *rx_dma, + u32 *plen) +{ + struct atmel_spi *as = spi_master_get_devdata(master); + u32 len = *plen; + + /* use scratch buffer only when rx or tx data is unspecified */ + if (xfer->rx_buf) + *rx_dma = xfer->rx_dma + xfer->len - *plen; + else { + *rx_dma = as->buffer_dma; + if (len > BUFFER_SIZE) + len = BUFFER_SIZE; + } + if (xfer->tx_buf) + *tx_dma = xfer->tx_dma + xfer->len - *plen; + else { + *tx_dma = as->buffer_dma; + if (len > BUFFER_SIZE) + len = BUFFER_SIZE; + memset(as->buffer, 0, len); + dma_sync_single_for_device(&as->pdev->dev, + as->buffer_dma, len, DMA_TO_DEVICE); + } + + *plen = len; +} + +/* + * Submit next transfer for DMA. + * lock is held, spi irq is blocked + */ +static void atmel_spi_next_xfer(struct spi_master *master, + struct spi_message *msg) +{ + struct atmel_spi *as = spi_master_get_devdata(master); + struct spi_transfer *xfer; + u32 len, remaining; + u32 ieval; + dma_addr_t tx_dma, rx_dma; + + if (!as->current_transfer) + xfer = list_entry(msg->transfers.next, + struct spi_transfer, transfer_list); + else if (!as->next_transfer) + xfer = list_entry(as->current_transfer->transfer_list.next, + struct spi_transfer, transfer_list); + else + xfer = NULL; + + if (xfer) { + spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); + + len = xfer->len; + atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); + remaining = xfer->len - len; + + spi_writel(as, RPR, rx_dma); + spi_writel(as, TPR, tx_dma); + + if (msg->spi->bits_per_word > 8) + len >>= 1; + spi_writel(as, RCR, len); + spi_writel(as, TCR, len); + + dev_dbg(&msg->spi->dev, + " start xfer %p: len %u tx %p/%08x rx %p/%08x\n", + xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, + xfer->rx_buf, xfer->rx_dma); + } else { + xfer = as->next_transfer; + remaining = as->next_remaining_bytes; + } + + as->current_transfer = xfer; + as->current_remaining_bytes = remaining; + + if (remaining > 0) + len = remaining; + else if (!atmel_spi_xfer_is_last(msg, xfer) + && atmel_spi_xfer_can_be_chained(xfer)) { + xfer = list_entry(xfer->transfer_list.next, + struct spi_transfer, transfer_list); + len = xfer->len; + } else + xfer = NULL; + + as->next_transfer = xfer; + + if (xfer) { + u32 total; + + total = len; + atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); + as->next_remaining_bytes = total - len; + + spi_writel(as, RNPR, rx_dma); + spi_writel(as, TNPR, tx_dma); + + if (msg->spi->bits_per_word > 8) + len >>= 1; + spi_writel(as, RNCR, len); + spi_writel(as, TNCR, len); + + dev_dbg(&msg->spi->dev, + " next xfer %p: len %u tx %p/%08x rx %p/%08x\n", + xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, + xfer->rx_buf, xfer->rx_dma); + ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES); + } else { + spi_writel(as, RNCR, 0); + spi_writel(as, TNCR, 0); + ieval = SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES); + } + + /* REVISIT: We're waiting for ENDRX before we start the next + * transfer because we need to handle some difficult timing + * issues otherwise. If we wait for ENDTX in one transfer and + * then starts waiting for ENDRX in the next, it's difficult + * to tell the difference between the ENDRX interrupt we're + * actually waiting for and the ENDRX interrupt of the + * previous transfer. + * + * It should be doable, though. Just not now... + */ + spi_writel(as, IER, ieval); + spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); +} + +static void atmel_spi_next_message(struct spi_master *master) +{ + struct atmel_spi *as = spi_master_get_devdata(master); + struct spi_message *msg; + struct spi_device *spi; + + BUG_ON(as->current_transfer); + + msg = list_entry(as->queue.next, struct spi_message, queue); + spi = msg->spi; + + dev_dbg(master->dev.parent, "start message %p for %s\n", + msg, dev_name(&spi->dev)); + + /* select chip if it's not still active */ + if (as->stay) { + if (as->stay != spi) { + cs_deactivate(as, as->stay); + cs_activate(as, spi); + } + as->stay = NULL; + } else + cs_activate(as, spi); + + atmel_spi_next_xfer(master, msg); +} + +/* + * For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma: + * - The buffer is either valid for CPU access, else NULL + * - If the buffer is valid, so is its DMA address + * + * This driver manages the dma address unless message->is_dma_mapped. + */ +static int +atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer) +{ + struct device *dev = &as->pdev->dev; + + xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS; + if (xfer->tx_buf) { + /* tx_buf is a const void* where we need a void * for the dma + * mapping */ + void *nonconst_tx = (void *)xfer->tx_buf; + + xfer->tx_dma = dma_map_single(dev, + nonconst_tx, xfer->len, + DMA_TO_DEVICE); + if (dma_mapping_error(dev, xfer->tx_dma)) + return -ENOMEM; + } + if (xfer->rx_buf) { + xfer->rx_dma = dma_map_single(dev, + xfer->rx_buf, xfer->len, + DMA_FROM_DEVICE); + if (dma_mapping_error(dev, xfer->rx_dma)) { + if (xfer->tx_buf) + dma_unmap_single(dev, + xfer->tx_dma, xfer->len, + DMA_TO_DEVICE); + return -ENOMEM; + } + } + return 0; +} + +static void atmel_spi_dma_unmap_xfer(struct spi_master *master, + struct spi_transfer *xfer) +{ + if (xfer->tx_dma != INVALID_DMA_ADDRESS) + dma_unmap_single(master->dev.parent, xfer->tx_dma, + xfer->len, DMA_TO_DEVICE); + if (xfer->rx_dma != INVALID_DMA_ADDRESS) + dma_unmap_single(master->dev.parent, xfer->rx_dma, + xfer->len, DMA_FROM_DEVICE); +} + +static void +atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as, + struct spi_message *msg, int status, int stay) +{ + if (!stay || status < 0) + cs_deactivate(as, msg->spi); + else + as->stay = msg->spi; + + list_del(&msg->queue); + msg->status = status; + + dev_dbg(master->dev.parent, + "xfer complete: %u bytes transferred\n", + msg->actual_length); + + spin_unlock(&as->lock); + msg->complete(msg->context); + spin_lock(&as->lock); + + as->current_transfer = NULL; + as->next_transfer = NULL; + + /* continue if needed */ + if (list_empty(&as->queue) || as->stopping) + spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); + else + atmel_spi_next_message(master); +} + +static irqreturn_t +atmel_spi_interrupt(int irq, void *dev_id) +{ + struct spi_master *master = dev_id; + struct atmel_spi *as = spi_master_get_devdata(master); + struct spi_message *msg; + struct spi_transfer *xfer; + u32 status, pending, imr; + int ret = IRQ_NONE; + + spin_lock(&as->lock); + + xfer = as->current_transfer; + msg = list_entry(as->queue.next, struct spi_message, queue); + + imr = spi_readl(as, IMR); + status = spi_readl(as, SR); + pending = status & imr; + + if (pending & SPI_BIT(OVRES)) { + int timeout; + + ret = IRQ_HANDLED; + + spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) + | SPI_BIT(OVRES))); + + /* + * When we get an overrun, we disregard the current + * transfer. Data will not be copied back from any + * bounce buffer and msg->actual_len will not be + * updated with the last xfer. + * + * We will also not process any remaning transfers in + * the message. + * + * First, stop the transfer and unmap the DMA buffers. + */ + spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); + if (!msg->is_dma_mapped) + atmel_spi_dma_unmap_xfer(master, xfer); + + /* REVISIT: udelay in irq is unfriendly */ + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + + dev_warn(master->dev.parent, "overrun (%u/%u remaining)\n", + spi_readl(as, TCR), spi_readl(as, RCR)); + + /* + * Clean up DMA registers and make sure the data + * registers are empty. + */ + spi_writel(as, RNCR, 0); + spi_writel(as, TNCR, 0); + spi_writel(as, RCR, 0); + spi_writel(as, TCR, 0); + for (timeout = 1000; timeout; timeout--) + if (spi_readl(as, SR) & SPI_BIT(TXEMPTY)) + break; + if (!timeout) + dev_warn(master->dev.parent, + "timeout waiting for TXEMPTY"); + while (spi_readl(as, SR) & SPI_BIT(RDRF)) + spi_readl(as, RDR); + + /* Clear any overrun happening while cleaning up */ + spi_readl(as, SR); + + atmel_spi_msg_done(master, as, msg, -EIO, 0); + } else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) { + ret = IRQ_HANDLED; + + spi_writel(as, IDR, pending); + + if (as->current_remaining_bytes == 0) { + msg->actual_length += xfer->len; + + if (!msg->is_dma_mapped) + atmel_spi_dma_unmap_xfer(master, xfer); + + /* REVISIT: udelay in irq is unfriendly */ + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + + if (atmel_spi_xfer_is_last(msg, xfer)) { + /* report completed message */ + atmel_spi_msg_done(master, as, msg, 0, + xfer->cs_change); + } else { + if (xfer->cs_change) { + cs_deactivate(as, msg->spi); + udelay(1); + cs_activate(as, msg->spi); + } + + /* + * Not done yet. Submit the next transfer. + * + * FIXME handle protocol options for xfer + */ + atmel_spi_next_xfer(master, msg); + } + } else { + /* + * Keep going, we still have data to send in + * the current transfer. + */ + atmel_spi_next_xfer(master, msg); + } + } + + spin_unlock(&as->lock); + + return ret; +} + +static int atmel_spi_setup(struct spi_device *spi) +{ + struct atmel_spi *as; + struct atmel_spi_device *asd; + u32 scbr, csr; + unsigned int bits = spi->bits_per_word; + unsigned long bus_hz; + unsigned int npcs_pin; + int ret; + + as = spi_master_get_devdata(spi->master); + + if (as->stopping) + return -ESHUTDOWN; + + if (spi->chip_select > spi->master->num_chipselect) { + dev_dbg(&spi->dev, + "setup: invalid chipselect %u (%u defined)\n", + spi->chip_select, spi->master->num_chipselect); + return -EINVAL; + } + + if (bits < 8 || bits > 16) { + dev_dbg(&spi->dev, + "setup: invalid bits_per_word %u (8 to 16)\n", + bits); + return -EINVAL; + } + + /* see notes above re chipselect */ + if (!atmel_spi_is_v2() + && spi->chip_select == 0 + && (spi->mode & SPI_CS_HIGH)) { + dev_dbg(&spi->dev, "setup: can't be active-high\n"); + return -EINVAL; + } + + /* v1 chips start out at half the peripheral bus speed. */ + bus_hz = clk_get_rate(as->clk); + if (!atmel_spi_is_v2()) + bus_hz /= 2; + + if (spi->max_speed_hz) { + /* + * Calculate the lowest divider that satisfies the + * constraint, assuming div32/fdiv/mbz == 0. + */ + scbr = DIV_ROUND_UP(bus_hz, spi->max_speed_hz); + + /* + * If the resulting divider doesn't fit into the + * register bitfield, we can't satisfy the constraint. + */ + if (scbr >= (1 << SPI_SCBR_SIZE)) { + dev_dbg(&spi->dev, + "setup: %d Hz too slow, scbr %u; min %ld Hz\n", + spi->max_speed_hz, scbr, bus_hz/255); + return -EINVAL; + } + } else + /* speed zero means "as slow as possible" */ + scbr = 0xff; + + csr = SPI_BF(SCBR, scbr) | SPI_BF(BITS, bits - 8); + if (spi->mode & SPI_CPOL) + csr |= SPI_BIT(CPOL); + if (!(spi->mode & SPI_CPHA)) + csr |= SPI_BIT(NCPHA); + + /* DLYBS is mostly irrelevant since we manage chipselect using GPIOs. + * + * DLYBCT would add delays between words, slowing down transfers. + * It could potentially be useful to cope with DMA bottlenecks, but + * in those cases it's probably best to just use a lower bitrate. + */ + csr |= SPI_BF(DLYBS, 0); + csr |= SPI_BF(DLYBCT, 0); + + /* chipselect must have been muxed as GPIO (e.g. in board setup) */ + npcs_pin = (unsigned int)spi->controller_data; + asd = spi->controller_state; + if (!asd) { + asd = kzalloc(sizeof(struct atmel_spi_device), GFP_KERNEL); + if (!asd) + return -ENOMEM; + + ret = gpio_request(npcs_pin, dev_name(&spi->dev)); + if (ret) { + kfree(asd); + return ret; + } + + asd->npcs_pin = npcs_pin; + spi->controller_state = asd; + gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH)); + } else { + unsigned long flags; + + spin_lock_irqsave(&as->lock, flags); + if (as->stay == spi) + as->stay = NULL; + cs_deactivate(as, spi); + spin_unlock_irqrestore(&as->lock, flags); + } + + asd->csr = csr; + + dev_dbg(&spi->dev, + "setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n", + bus_hz / scbr, bits, spi->mode, spi->chip_select, csr); + + if (!atmel_spi_is_v2()) + spi_writel(as, CSR0 + 4 * spi->chip_select, csr); + + return 0; +} + +static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct atmel_spi *as; + struct spi_transfer *xfer; + unsigned long flags; + struct device *controller = spi->master->dev.parent; + u8 bits; + struct atmel_spi_device *asd; + + as = spi_master_get_devdata(spi->master); + + dev_dbg(controller, "new message %p submitted for %s\n", + msg, dev_name(&spi->dev)); + + if (unlikely(list_empty(&msg->transfers))) + return -EINVAL; + + if (as->stopping) + return -ESHUTDOWN; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) { + dev_dbg(&spi->dev, "missing rx or tx buf\n"); + return -EINVAL; + } + + if (xfer->bits_per_word) { + asd = spi->controller_state; + bits = (asd->csr >> 4) & 0xf; + if (bits != xfer->bits_per_word - 8) { + dev_dbg(&spi->dev, "you can't yet change " + "bits_per_word in transfers\n"); + return -ENOPROTOOPT; + } + } + + /* FIXME implement these protocol options!! */ + if (xfer->speed_hz) { + dev_dbg(&spi->dev, "no protocol options yet\n"); + return -ENOPROTOOPT; + } + + /* + * DMA map early, for performance (empties dcache ASAP) and + * better fault reporting. This is a DMA-only driver. + * + * NOTE that if dma_unmap_single() ever starts to do work on + * platforms supported by this driver, we would need to clean + * up mappings for previously-mapped transfers. + */ + if (!msg->is_dma_mapped) { + if (atmel_spi_dma_map_xfer(as, xfer) < 0) + return -ENOMEM; + } + } + +#ifdef VERBOSE + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + dev_dbg(controller, + " xfer %p: len %u tx %p/%08x rx %p/%08x\n", + xfer, xfer->len, + xfer->tx_buf, xfer->tx_dma, + xfer->rx_buf, xfer->rx_dma); + } +#endif + + msg->status = -EINPROGRESS; + msg->actual_length = 0; + + spin_lock_irqsave(&as->lock, flags); + list_add_tail(&msg->queue, &as->queue); + if (!as->current_transfer) + atmel_spi_next_message(spi->master); + spin_unlock_irqrestore(&as->lock, flags); + + return 0; +} + +static void atmel_spi_cleanup(struct spi_device *spi) +{ + struct atmel_spi *as = spi_master_get_devdata(spi->master); + struct atmel_spi_device *asd = spi->controller_state; + unsigned gpio = (unsigned) spi->controller_data; + unsigned long flags; + + if (!asd) + return; + + spin_lock_irqsave(&as->lock, flags); + if (as->stay == spi) { + as->stay = NULL; + cs_deactivate(as, spi); + } + spin_unlock_irqrestore(&as->lock, flags); + + spi->controller_state = NULL; + gpio_free(gpio); + kfree(asd); +} + +/*-------------------------------------------------------------------------*/ + +static int __init atmel_spi_probe(struct platform_device *pdev) +{ + struct resource *regs; + int irq; + struct clk *clk; + int ret; + struct spi_master *master; + struct atmel_spi *as; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return -ENXIO; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + clk = clk_get(&pdev->dev, "spi_clk"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + /* setup spi core then atmel-specific driver state */ + ret = -ENOMEM; + master = spi_alloc_master(&pdev->dev, sizeof *as); + if (!master) + goto out_free; + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + master->bus_num = pdev->id; + master->num_chipselect = 4; + master->setup = atmel_spi_setup; + master->transfer = atmel_spi_transfer; + master->cleanup = atmel_spi_cleanup; + platform_set_drvdata(pdev, master); + + as = spi_master_get_devdata(master); + + /* + * Scratch buffer is used for throwaway rx and tx data. + * It's coherent to minimize dcache pollution. + */ + as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE, + &as->buffer_dma, GFP_KERNEL); + if (!as->buffer) + goto out_free; + + spin_lock_init(&as->lock); + INIT_LIST_HEAD(&as->queue); + as->pdev = pdev; + as->regs = ioremap(regs->start, resource_size(regs)); + if (!as->regs) + goto out_free_buffer; + as->irq = irq; + as->clk = clk; + + ret = request_irq(irq, atmel_spi_interrupt, 0, + dev_name(&pdev->dev), master); + if (ret) + goto out_unmap_regs; + + /* Initialize the hardware */ + clk_enable(clk); + spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ + spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS)); + spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); + spi_writel(as, CR, SPI_BIT(SPIEN)); + + /* go! */ + dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n", + (unsigned long)regs->start, irq); + + ret = spi_register_master(master); + if (ret) + goto out_reset_hw; + + return 0; + +out_reset_hw: + spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ + clk_disable(clk); + free_irq(irq, master); +out_unmap_regs: + iounmap(as->regs); +out_free_buffer: + dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer, + as->buffer_dma); +out_free: + clk_put(clk); + spi_master_put(master); + return ret; +} + +static int __exit atmel_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct atmel_spi *as = spi_master_get_devdata(master); + struct spi_message *msg; + + /* reset the hardware and block queue progress */ + spin_lock_irq(&as->lock); + as->stopping = 1; + spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ + spi_readl(as, SR); + spin_unlock_irq(&as->lock); + + /* Terminate remaining queued transfers */ + list_for_each_entry(msg, &as->queue, queue) { + /* REVISIT unmapping the dma is a NOP on ARM and AVR32 + * but we shouldn't depend on that... + */ + msg->status = -ESHUTDOWN; + msg->complete(msg->context); + } + + dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer, + as->buffer_dma); + + clk_disable(as->clk); + clk_put(as->clk); + free_irq(as->irq, master); + iounmap(as->regs); + + spi_unregister_master(master); + + return 0; +} + +#ifdef CONFIG_PM + +static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct atmel_spi *as = spi_master_get_devdata(master); + + clk_disable(as->clk); + return 0; +} + +static int atmel_spi_resume(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct atmel_spi *as = spi_master_get_devdata(master); + + clk_enable(as->clk); + return 0; +} + +#else +#define atmel_spi_suspend NULL +#define atmel_spi_resume NULL +#endif + + +static struct platform_driver atmel_spi_driver = { + .driver = { + .name = "atmel_spi", + .owner = THIS_MODULE, + }, + .suspend = atmel_spi_suspend, + .resume = atmel_spi_resume, + .remove = __exit_p(atmel_spi_remove), +}; + +static int __init atmel_spi_init(void) +{ + return platform_driver_probe(&atmel_spi_driver, atmel_spi_probe); +} +module_init(atmel_spi_init); + +static void __exit atmel_spi_exit(void) +{ + platform_driver_unregister(&atmel_spi_driver); +} +module_exit(atmel_spi_exit); + +MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver"); +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:atmel_spi"); diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c new file mode 100644 index 000000000000..bddee5f516b2 --- /dev/null +++ b/drivers/spi/spi-au1550.c @@ -0,0 +1,1032 @@ +/* + * au1550 psc spi controller driver + * may work also with au1200, au1210, au1250 + * will not work on au1000, au1100 and au1500 (no full spi controller there) + * + * Copyright (c) 2006 ATRON electronic GmbH + * Author: Jan Nikitenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +static unsigned usedma = 1; +module_param(usedma, uint, 0644); + +/* +#define AU1550_SPI_DEBUG_LOOPBACK +*/ + + +#define AU1550_SPI_DBDMA_DESCRIPTORS 1 +#define AU1550_SPI_DMA_RXTMP_MINSIZE 2048U + +struct au1550_spi { + struct spi_bitbang bitbang; + + volatile psc_spi_t __iomem *regs; + int irq; + unsigned freq_max; + unsigned freq_min; + + unsigned len; + unsigned tx_count; + unsigned rx_count; + const u8 *tx; + u8 *rx; + + void (*rx_word)(struct au1550_spi *hw); + void (*tx_word)(struct au1550_spi *hw); + int (*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t); + irqreturn_t (*irq_callback)(struct au1550_spi *hw); + + struct completion master_done; + + unsigned usedma; + u32 dma_tx_id; + u32 dma_rx_id; + u32 dma_tx_ch; + u32 dma_rx_ch; + + u8 *dma_rx_tmpbuf; + unsigned dma_rx_tmpbuf_size; + u32 dma_rx_tmpbuf_addr; + + struct spi_master *master; + struct device *dev; + struct au1550_spi_info *pdata; + struct resource *ioarea; +}; + + +/* we use an 8-bit memory device for dma transfers to/from spi fifo */ +static dbdev_tab_t au1550_spi_mem_dbdev = +{ + .dev_id = DBDMA_MEM_CHAN, + .dev_flags = DEV_FLAGS_ANYUSE|DEV_FLAGS_SYNC, + .dev_tsize = 0, + .dev_devwidth = 8, + .dev_physaddr = 0x00000000, + .dev_intlevel = 0, + .dev_intpolarity = 0 +}; + +static int ddma_memid; /* id to above mem dma device */ + +static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw); + + +/* + * compute BRG and DIV bits to setup spi clock based on main input clock rate + * that was specified in platform data structure + * according to au1550 datasheet: + * psc_tempclk = psc_mainclk / (2 << DIV) + * spiclk = psc_tempclk / (2 * (BRG + 1)) + * BRG valid range is 4..63 + * DIV valid range is 0..3 + */ +static u32 au1550_spi_baudcfg(struct au1550_spi *hw, unsigned speed_hz) +{ + u32 mainclk_hz = hw->pdata->mainclk_hz; + u32 div, brg; + + for (div = 0; div < 4; div++) { + brg = mainclk_hz / speed_hz / (4 << div); + /* now we have BRG+1 in brg, so count with that */ + if (brg < (4 + 1)) { + brg = (4 + 1); /* speed_hz too big */ + break; /* set lowest brg (div is == 0) */ + } + if (brg <= (63 + 1)) + break; /* we have valid brg and div */ + } + if (div == 4) { + div = 3; /* speed_hz too small */ + brg = (63 + 1); /* set highest brg and div */ + } + brg--; + return PSC_SPICFG_SET_BAUD(brg) | PSC_SPICFG_SET_DIV(div); +} + +static inline void au1550_spi_mask_ack_all(struct au1550_spi *hw) +{ + hw->regs->psc_spimsk = + PSC_SPIMSK_MM | PSC_SPIMSK_RR | PSC_SPIMSK_RO + | PSC_SPIMSK_RU | PSC_SPIMSK_TR | PSC_SPIMSK_TO + | PSC_SPIMSK_TU | PSC_SPIMSK_SD | PSC_SPIMSK_MD; + au_sync(); + + hw->regs->psc_spievent = + PSC_SPIEVNT_MM | PSC_SPIEVNT_RR | PSC_SPIEVNT_RO + | PSC_SPIEVNT_RU | PSC_SPIEVNT_TR | PSC_SPIEVNT_TO + | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD | PSC_SPIEVNT_MD; + au_sync(); +} + +static void au1550_spi_reset_fifos(struct au1550_spi *hw) +{ + u32 pcr; + + hw->regs->psc_spipcr = PSC_SPIPCR_RC | PSC_SPIPCR_TC; + au_sync(); + do { + pcr = hw->regs->psc_spipcr; + au_sync(); + } while (pcr != 0); +} + +/* + * dma transfers are used for the most common spi word size of 8-bits + * we cannot easily change already set up dma channels' width, so if we wanted + * dma support for more than 8-bit words (up to 24 bits), we would need to + * setup dma channels from scratch on each spi transfer, based on bits_per_word + * instead we have pre set up 8 bit dma channels supporting spi 4 to 8 bits + * transfers, and 9 to 24 bits spi transfers will be done in pio irq based mode + * callbacks to handle dma or pio are set up in au1550_spi_bits_handlers_set() + */ +static void au1550_spi_chipsel(struct spi_device *spi, int value) +{ + struct au1550_spi *hw = spi_master_get_devdata(spi->master); + unsigned cspol = spi->mode & SPI_CS_HIGH ? 1 : 0; + u32 cfg, stat; + + switch (value) { + case BITBANG_CS_INACTIVE: + if (hw->pdata->deactivate_cs) + hw->pdata->deactivate_cs(hw->pdata, spi->chip_select, + cspol); + break; + + case BITBANG_CS_ACTIVE: + au1550_spi_bits_handlers_set(hw, spi->bits_per_word); + + cfg = hw->regs->psc_spicfg; + au_sync(); + hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE; + au_sync(); + + if (spi->mode & SPI_CPOL) + cfg |= PSC_SPICFG_BI; + else + cfg &= ~PSC_SPICFG_BI; + if (spi->mode & SPI_CPHA) + cfg &= ~PSC_SPICFG_CDE; + else + cfg |= PSC_SPICFG_CDE; + + if (spi->mode & SPI_LSB_FIRST) + cfg |= PSC_SPICFG_MLF; + else + cfg &= ~PSC_SPICFG_MLF; + + if (hw->usedma && spi->bits_per_word <= 8) + cfg &= ~PSC_SPICFG_DD_DISABLE; + else + cfg |= PSC_SPICFG_DD_DISABLE; + cfg = PSC_SPICFG_CLR_LEN(cfg); + cfg |= PSC_SPICFG_SET_LEN(spi->bits_per_word); + + cfg = PSC_SPICFG_CLR_BAUD(cfg); + cfg &= ~PSC_SPICFG_SET_DIV(3); + cfg |= au1550_spi_baudcfg(hw, spi->max_speed_hz); + + hw->regs->psc_spicfg = cfg | PSC_SPICFG_DE_ENABLE; + au_sync(); + do { + stat = hw->regs->psc_spistat; + au_sync(); + } while ((stat & PSC_SPISTAT_DR) == 0); + + if (hw->pdata->activate_cs) + hw->pdata->activate_cs(hw->pdata, spi->chip_select, + cspol); + break; + } +} + +static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct au1550_spi *hw = spi_master_get_devdata(spi->master); + unsigned bpw, hz; + u32 cfg, stat; + + bpw = spi->bits_per_word; + hz = spi->max_speed_hz; + if (t) { + if (t->bits_per_word) + bpw = t->bits_per_word; + if (t->speed_hz) + hz = t->speed_hz; + } + + if (bpw < 4 || bpw > 24) { + dev_err(&spi->dev, "setupxfer: invalid bits_per_word=%d\n", + bpw); + return -EINVAL; + } + if (hz > spi->max_speed_hz || hz > hw->freq_max || hz < hw->freq_min) { + dev_err(&spi->dev, "setupxfer: clock rate=%d out of range\n", + hz); + return -EINVAL; + } + + au1550_spi_bits_handlers_set(hw, spi->bits_per_word); + + cfg = hw->regs->psc_spicfg; + au_sync(); + hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE; + au_sync(); + + if (hw->usedma && bpw <= 8) + cfg &= ~PSC_SPICFG_DD_DISABLE; + else + cfg |= PSC_SPICFG_DD_DISABLE; + cfg = PSC_SPICFG_CLR_LEN(cfg); + cfg |= PSC_SPICFG_SET_LEN(bpw); + + cfg = PSC_SPICFG_CLR_BAUD(cfg); + cfg &= ~PSC_SPICFG_SET_DIV(3); + cfg |= au1550_spi_baudcfg(hw, hz); + + hw->regs->psc_spicfg = cfg; + au_sync(); + + if (cfg & PSC_SPICFG_DE_ENABLE) { + do { + stat = hw->regs->psc_spistat; + au_sync(); + } while ((stat & PSC_SPISTAT_DR) == 0); + } + + au1550_spi_reset_fifos(hw); + au1550_spi_mask_ack_all(hw); + return 0; +} + +static int au1550_spi_setup(struct spi_device *spi) +{ + struct au1550_spi *hw = spi_master_get_devdata(spi->master); + + if (spi->bits_per_word < 4 || spi->bits_per_word > 24) { + dev_err(&spi->dev, "setup: invalid bits_per_word=%d\n", + spi->bits_per_word); + return -EINVAL; + } + + if (spi->max_speed_hz == 0) + spi->max_speed_hz = hw->freq_max; + if (spi->max_speed_hz > hw->freq_max + || spi->max_speed_hz < hw->freq_min) + return -EINVAL; + /* + * NOTE: cannot change speed and other hw settings immediately, + * otherwise sharing of spi bus is not possible, + * so do not call setupxfer(spi, NULL) here + */ + return 0; +} + +/* + * for dma spi transfers, we have to setup rx channel, otherwise there is + * no reliable way how to recognize that spi transfer is done + * dma complete callbacks are called before real spi transfer is finished + * and if only tx dma channel is set up (and rx fifo overflow event masked) + * spi master done event irq is not generated unless rx fifo is empty (emptied) + * so we need rx tmp buffer to use for rx dma if user does not provide one + */ +static int au1550_spi_dma_rxtmp_alloc(struct au1550_spi *hw, unsigned size) +{ + hw->dma_rx_tmpbuf = kmalloc(size, GFP_KERNEL); + if (!hw->dma_rx_tmpbuf) + return -ENOMEM; + hw->dma_rx_tmpbuf_size = size; + hw->dma_rx_tmpbuf_addr = dma_map_single(hw->dev, hw->dma_rx_tmpbuf, + size, DMA_FROM_DEVICE); + if (dma_mapping_error(hw->dev, hw->dma_rx_tmpbuf_addr)) { + kfree(hw->dma_rx_tmpbuf); + hw->dma_rx_tmpbuf = 0; + hw->dma_rx_tmpbuf_size = 0; + return -EFAULT; + } + return 0; +} + +static void au1550_spi_dma_rxtmp_free(struct au1550_spi *hw) +{ + dma_unmap_single(hw->dev, hw->dma_rx_tmpbuf_addr, + hw->dma_rx_tmpbuf_size, DMA_FROM_DEVICE); + kfree(hw->dma_rx_tmpbuf); + hw->dma_rx_tmpbuf = 0; + hw->dma_rx_tmpbuf_size = 0; +} + +static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) +{ + struct au1550_spi *hw = spi_master_get_devdata(spi->master); + dma_addr_t dma_tx_addr; + dma_addr_t dma_rx_addr; + u32 res; + + hw->len = t->len; + hw->tx_count = 0; + hw->rx_count = 0; + + hw->tx = t->tx_buf; + hw->rx = t->rx_buf; + dma_tx_addr = t->tx_dma; + dma_rx_addr = t->rx_dma; + + /* + * check if buffers are already dma mapped, map them otherwise: + * - first map the TX buffer, so cache data gets written to memory + * - then map the RX buffer, so that cache entries (with + * soon-to-be-stale data) get removed + * use rx buffer in place of tx if tx buffer was not provided + * use temp rx buffer (preallocated or realloc to fit) for rx dma + */ + if (t->tx_buf) { + if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ + dma_tx_addr = dma_map_single(hw->dev, + (void *)t->tx_buf, + t->len, DMA_TO_DEVICE); + if (dma_mapping_error(hw->dev, dma_tx_addr)) + dev_err(hw->dev, "tx dma map error\n"); + } + } + + if (t->rx_buf) { + if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ + dma_rx_addr = dma_map_single(hw->dev, + (void *)t->rx_buf, + t->len, DMA_FROM_DEVICE); + if (dma_mapping_error(hw->dev, dma_rx_addr)) + dev_err(hw->dev, "rx dma map error\n"); + } + } else { + if (t->len > hw->dma_rx_tmpbuf_size) { + int ret; + + au1550_spi_dma_rxtmp_free(hw); + ret = au1550_spi_dma_rxtmp_alloc(hw, max(t->len, + AU1550_SPI_DMA_RXTMP_MINSIZE)); + if (ret < 0) + return ret; + } + hw->rx = hw->dma_rx_tmpbuf; + dma_rx_addr = hw->dma_rx_tmpbuf_addr; + dma_sync_single_for_device(hw->dev, dma_rx_addr, + t->len, DMA_FROM_DEVICE); + } + + if (!t->tx_buf) { + dma_sync_single_for_device(hw->dev, dma_rx_addr, + t->len, DMA_BIDIRECTIONAL); + hw->tx = hw->rx; + } + + /* put buffers on the ring */ + res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, virt_to_phys(hw->rx), + t->len, DDMA_FLAGS_IE); + if (!res) + dev_err(hw->dev, "rx dma put dest error\n"); + + res = au1xxx_dbdma_put_source(hw->dma_tx_ch, virt_to_phys(hw->tx), + t->len, DDMA_FLAGS_IE); + if (!res) + dev_err(hw->dev, "tx dma put source error\n"); + + au1xxx_dbdma_start(hw->dma_rx_ch); + au1xxx_dbdma_start(hw->dma_tx_ch); + + /* by default enable nearly all events interrupt */ + hw->regs->psc_spimsk = PSC_SPIMSK_SD; + au_sync(); + + /* start the transfer */ + hw->regs->psc_spipcr = PSC_SPIPCR_MS; + au_sync(); + + wait_for_completion(&hw->master_done); + + au1xxx_dbdma_stop(hw->dma_tx_ch); + au1xxx_dbdma_stop(hw->dma_rx_ch); + + if (!t->rx_buf) { + /* using the temporal preallocated and premapped buffer */ + dma_sync_single_for_cpu(hw->dev, dma_rx_addr, t->len, + DMA_FROM_DEVICE); + } + /* unmap buffers if mapped above */ + if (t->rx_buf && t->rx_dma == 0 ) + dma_unmap_single(hw->dev, dma_rx_addr, t->len, + DMA_FROM_DEVICE); + if (t->tx_buf && t->tx_dma == 0 ) + dma_unmap_single(hw->dev, dma_tx_addr, t->len, + DMA_TO_DEVICE); + + return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count; +} + +static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw) +{ + u32 stat, evnt; + + stat = hw->regs->psc_spistat; + evnt = hw->regs->psc_spievent; + au_sync(); + if ((stat & PSC_SPISTAT_DI) == 0) { + dev_err(hw->dev, "Unexpected IRQ!\n"); + return IRQ_NONE; + } + + if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO + | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO + | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD)) + != 0) { + /* + * due to an spi error we consider transfer as done, + * so mask all events until before next transfer start + * and stop the possibly running dma immediatelly + */ + au1550_spi_mask_ack_all(hw); + au1xxx_dbdma_stop(hw->dma_rx_ch); + au1xxx_dbdma_stop(hw->dma_tx_ch); + + /* get number of transferred bytes */ + hw->rx_count = hw->len - au1xxx_get_dma_residue(hw->dma_rx_ch); + hw->tx_count = hw->len - au1xxx_get_dma_residue(hw->dma_tx_ch); + + au1xxx_dbdma_reset(hw->dma_rx_ch); + au1xxx_dbdma_reset(hw->dma_tx_ch); + au1550_spi_reset_fifos(hw); + + if (evnt == PSC_SPIEVNT_RO) + dev_err(hw->dev, + "dma transfer: receive FIFO overflow!\n"); + else + dev_err(hw->dev, + "dma transfer: unexpected SPI error " + "(event=0x%x stat=0x%x)!\n", evnt, stat); + + complete(&hw->master_done); + return IRQ_HANDLED; + } + + if ((evnt & PSC_SPIEVNT_MD) != 0) { + /* transfer completed successfully */ + au1550_spi_mask_ack_all(hw); + hw->rx_count = hw->len; + hw->tx_count = hw->len; + complete(&hw->master_done); + } + return IRQ_HANDLED; +} + + +/* routines to handle different word sizes in pio mode */ +#define AU1550_SPI_RX_WORD(size, mask) \ +static void au1550_spi_rx_word_##size(struct au1550_spi *hw) \ +{ \ + u32 fifoword = hw->regs->psc_spitxrx & (u32)(mask); \ + au_sync(); \ + if (hw->rx) { \ + *(u##size *)hw->rx = (u##size)fifoword; \ + hw->rx += (size) / 8; \ + } \ + hw->rx_count += (size) / 8; \ +} + +#define AU1550_SPI_TX_WORD(size, mask) \ +static void au1550_spi_tx_word_##size(struct au1550_spi *hw) \ +{ \ + u32 fifoword = 0; \ + if (hw->tx) { \ + fifoword = *(u##size *)hw->tx & (u32)(mask); \ + hw->tx += (size) / 8; \ + } \ + hw->tx_count += (size) / 8; \ + if (hw->tx_count >= hw->len) \ + fifoword |= PSC_SPITXRX_LC; \ + hw->regs->psc_spitxrx = fifoword; \ + au_sync(); \ +} + +AU1550_SPI_RX_WORD(8,0xff) +AU1550_SPI_RX_WORD(16,0xffff) +AU1550_SPI_RX_WORD(32,0xffffff) +AU1550_SPI_TX_WORD(8,0xff) +AU1550_SPI_TX_WORD(16,0xffff) +AU1550_SPI_TX_WORD(32,0xffffff) + +static int au1550_spi_pio_txrxb(struct spi_device *spi, struct spi_transfer *t) +{ + u32 stat, mask; + struct au1550_spi *hw = spi_master_get_devdata(spi->master); + + hw->tx = t->tx_buf; + hw->rx = t->rx_buf; + hw->len = t->len; + hw->tx_count = 0; + hw->rx_count = 0; + + /* by default enable nearly all events after filling tx fifo */ + mask = PSC_SPIMSK_SD; + + /* fill the transmit FIFO */ + while (hw->tx_count < hw->len) { + + hw->tx_word(hw); + + if (hw->tx_count >= hw->len) { + /* mask tx fifo request interrupt as we are done */ + mask |= PSC_SPIMSK_TR; + } + + stat = hw->regs->psc_spistat; + au_sync(); + if (stat & PSC_SPISTAT_TF) + break; + } + + /* enable event interrupts */ + hw->regs->psc_spimsk = mask; + au_sync(); + + /* start the transfer */ + hw->regs->psc_spipcr = PSC_SPIPCR_MS; + au_sync(); + + wait_for_completion(&hw->master_done); + + return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count; +} + +static irqreturn_t au1550_spi_pio_irq_callback(struct au1550_spi *hw) +{ + int busy; + u32 stat, evnt; + + stat = hw->regs->psc_spistat; + evnt = hw->regs->psc_spievent; + au_sync(); + if ((stat & PSC_SPISTAT_DI) == 0) { + dev_err(hw->dev, "Unexpected IRQ!\n"); + return IRQ_NONE; + } + + if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO + | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO + | PSC_SPIEVNT_SD)) + != 0) { + /* + * due to an error we consider transfer as done, + * so mask all events until before next transfer start + */ + au1550_spi_mask_ack_all(hw); + au1550_spi_reset_fifos(hw); + dev_err(hw->dev, + "pio transfer: unexpected SPI error " + "(event=0x%x stat=0x%x)!\n", evnt, stat); + complete(&hw->master_done); + return IRQ_HANDLED; + } + + /* + * while there is something to read from rx fifo + * or there is a space to write to tx fifo: + */ + do { + busy = 0; + stat = hw->regs->psc_spistat; + au_sync(); + + /* + * Take care to not let the Rx FIFO overflow. + * + * We only write a byte if we have read one at least. Initially, + * the write fifo is full, so we should read from the read fifo + * first. + * In case we miss a word from the read fifo, we should get a + * RO event and should back out. + */ + if (!(stat & PSC_SPISTAT_RE) && hw->rx_count < hw->len) { + hw->rx_word(hw); + busy = 1; + + if (!(stat & PSC_SPISTAT_TF) && hw->tx_count < hw->len) + hw->tx_word(hw); + } + } while (busy); + + hw->regs->psc_spievent = PSC_SPIEVNT_RR | PSC_SPIEVNT_TR; + au_sync(); + + /* + * Restart the SPI transmission in case of a transmit underflow. + * This seems to work despite the notes in the Au1550 data book + * of Figure 8-4 with flowchart for SPI master operation: + * + * """Note 1: An XFR Error Interrupt occurs, unless masked, + * for any of the following events: Tx FIFO Underflow, + * Rx FIFO Overflow, or Multiple-master Error + * Note 2: In case of a Tx Underflow Error, all zeroes are + * transmitted.""" + * + * By simply restarting the spi transfer on Tx Underflow Error, + * we assume that spi transfer was paused instead of zeroes + * transmittion mentioned in the Note 2 of Au1550 data book. + */ + if (evnt & PSC_SPIEVNT_TU) { + hw->regs->psc_spievent = PSC_SPIEVNT_TU | PSC_SPIEVNT_MD; + au_sync(); + hw->regs->psc_spipcr = PSC_SPIPCR_MS; + au_sync(); + } + + if (hw->rx_count >= hw->len) { + /* transfer completed successfully */ + au1550_spi_mask_ack_all(hw); + complete(&hw->master_done); + } + return IRQ_HANDLED; +} + +static int au1550_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct au1550_spi *hw = spi_master_get_devdata(spi->master); + return hw->txrx_bufs(spi, t); +} + +static irqreturn_t au1550_spi_irq(int irq, void *dev) +{ + struct au1550_spi *hw = dev; + return hw->irq_callback(hw); +} + +static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw) +{ + if (bpw <= 8) { + if (hw->usedma) { + hw->txrx_bufs = &au1550_spi_dma_txrxb; + hw->irq_callback = &au1550_spi_dma_irq_callback; + } else { + hw->rx_word = &au1550_spi_rx_word_8; + hw->tx_word = &au1550_spi_tx_word_8; + hw->txrx_bufs = &au1550_spi_pio_txrxb; + hw->irq_callback = &au1550_spi_pio_irq_callback; + } + } else if (bpw <= 16) { + hw->rx_word = &au1550_spi_rx_word_16; + hw->tx_word = &au1550_spi_tx_word_16; + hw->txrx_bufs = &au1550_spi_pio_txrxb; + hw->irq_callback = &au1550_spi_pio_irq_callback; + } else { + hw->rx_word = &au1550_spi_rx_word_32; + hw->tx_word = &au1550_spi_tx_word_32; + hw->txrx_bufs = &au1550_spi_pio_txrxb; + hw->irq_callback = &au1550_spi_pio_irq_callback; + } +} + +static void __init au1550_spi_setup_psc_as_spi(struct au1550_spi *hw) +{ + u32 stat, cfg; + + /* set up the PSC for SPI mode */ + hw->regs->psc_ctrl = PSC_CTRL_DISABLE; + au_sync(); + hw->regs->psc_sel = PSC_SEL_PS_SPIMODE; + au_sync(); + + hw->regs->psc_spicfg = 0; + au_sync(); + + hw->regs->psc_ctrl = PSC_CTRL_ENABLE; + au_sync(); + + do { + stat = hw->regs->psc_spistat; + au_sync(); + } while ((stat & PSC_SPISTAT_SR) == 0); + + + cfg = hw->usedma ? 0 : PSC_SPICFG_DD_DISABLE; + cfg |= PSC_SPICFG_SET_LEN(8); + cfg |= PSC_SPICFG_RT_FIFO8 | PSC_SPICFG_TT_FIFO8; + /* use minimal allowed brg and div values as initial setting: */ + cfg |= PSC_SPICFG_SET_BAUD(4) | PSC_SPICFG_SET_DIV(0); + +#ifdef AU1550_SPI_DEBUG_LOOPBACK + cfg |= PSC_SPICFG_LB; +#endif + + hw->regs->psc_spicfg = cfg; + au_sync(); + + au1550_spi_mask_ack_all(hw); + + hw->regs->psc_spicfg |= PSC_SPICFG_DE_ENABLE; + au_sync(); + + do { + stat = hw->regs->psc_spistat; + au_sync(); + } while ((stat & PSC_SPISTAT_DR) == 0); + + au1550_spi_reset_fifos(hw); +} + + +static int __init au1550_spi_probe(struct platform_device *pdev) +{ + struct au1550_spi *hw; + struct spi_master *master; + struct resource *r; + int err = 0; + + master = spi_alloc_master(&pdev->dev, sizeof(struct au1550_spi)); + if (master == NULL) { + dev_err(&pdev->dev, "No memory for spi_master\n"); + err = -ENOMEM; + goto err_nomem; + } + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST; + + hw = spi_master_get_devdata(master); + + hw->master = spi_master_get(master); + hw->pdata = pdev->dev.platform_data; + hw->dev = &pdev->dev; + + if (hw->pdata == NULL) { + dev_err(&pdev->dev, "No platform data supplied\n"); + err = -ENOENT; + goto err_no_pdata; + } + + r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!r) { + dev_err(&pdev->dev, "no IRQ\n"); + err = -ENODEV; + goto err_no_iores; + } + hw->irq = r->start; + + hw->usedma = 0; + r = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (r) { + hw->dma_tx_id = r->start; + r = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (r) { + hw->dma_rx_id = r->start; + if (usedma && ddma_memid) { + if (pdev->dev.dma_mask == NULL) + dev_warn(&pdev->dev, "no dma mask\n"); + else + hw->usedma = 1; + } + } + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no mmio resource\n"); + err = -ENODEV; + goto err_no_iores; + } + + hw->ioarea = request_mem_region(r->start, sizeof(psc_spi_t), + pdev->name); + if (!hw->ioarea) { + dev_err(&pdev->dev, "Cannot reserve iomem region\n"); + err = -ENXIO; + goto err_no_iores; + } + + hw->regs = (psc_spi_t __iomem *)ioremap(r->start, sizeof(psc_spi_t)); + if (!hw->regs) { + dev_err(&pdev->dev, "cannot ioremap\n"); + err = -ENXIO; + goto err_ioremap; + } + + platform_set_drvdata(pdev, hw); + + init_completion(&hw->master_done); + + hw->bitbang.master = hw->master; + hw->bitbang.setup_transfer = au1550_spi_setupxfer; + hw->bitbang.chipselect = au1550_spi_chipsel; + hw->bitbang.master->setup = au1550_spi_setup; + hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs; + + if (hw->usedma) { + hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(ddma_memid, + hw->dma_tx_id, NULL, (void *)hw); + if (hw->dma_tx_ch == 0) { + dev_err(&pdev->dev, + "Cannot allocate tx dma channel\n"); + err = -ENXIO; + goto err_no_txdma; + } + au1xxx_dbdma_set_devwidth(hw->dma_tx_ch, 8); + if (au1xxx_dbdma_ring_alloc(hw->dma_tx_ch, + AU1550_SPI_DBDMA_DESCRIPTORS) == 0) { + dev_err(&pdev->dev, + "Cannot allocate tx dma descriptors\n"); + err = -ENXIO; + goto err_no_txdma_descr; + } + + + hw->dma_rx_ch = au1xxx_dbdma_chan_alloc(hw->dma_rx_id, + ddma_memid, NULL, (void *)hw); + if (hw->dma_rx_ch == 0) { + dev_err(&pdev->dev, + "Cannot allocate rx dma channel\n"); + err = -ENXIO; + goto err_no_rxdma; + } + au1xxx_dbdma_set_devwidth(hw->dma_rx_ch, 8); + if (au1xxx_dbdma_ring_alloc(hw->dma_rx_ch, + AU1550_SPI_DBDMA_DESCRIPTORS) == 0) { + dev_err(&pdev->dev, + "Cannot allocate rx dma descriptors\n"); + err = -ENXIO; + goto err_no_rxdma_descr; + } + + err = au1550_spi_dma_rxtmp_alloc(hw, + AU1550_SPI_DMA_RXTMP_MINSIZE); + if (err < 0) { + dev_err(&pdev->dev, + "Cannot allocate initial rx dma tmp buffer\n"); + goto err_dma_rxtmp_alloc; + } + } + + au1550_spi_bits_handlers_set(hw, 8); + + err = request_irq(hw->irq, au1550_spi_irq, 0, pdev->name, hw); + if (err) { + dev_err(&pdev->dev, "Cannot claim IRQ\n"); + goto err_no_irq; + } + + master->bus_num = pdev->id; + master->num_chipselect = hw->pdata->num_chipselect; + + /* + * precompute valid range for spi freq - from au1550 datasheet: + * psc_tempclk = psc_mainclk / (2 << DIV) + * spiclk = psc_tempclk / (2 * (BRG + 1)) + * BRG valid range is 4..63 + * DIV valid range is 0..3 + * round the min and max frequencies to values that would still + * produce valid brg and div + */ + { + int min_div = (2 << 0) * (2 * (4 + 1)); + int max_div = (2 << 3) * (2 * (63 + 1)); + hw->freq_max = hw->pdata->mainclk_hz / min_div; + hw->freq_min = hw->pdata->mainclk_hz / (max_div + 1) + 1; + } + + au1550_spi_setup_psc_as_spi(hw); + + err = spi_bitbang_start(&hw->bitbang); + if (err) { + dev_err(&pdev->dev, "Failed to register SPI master\n"); + goto err_register; + } + + dev_info(&pdev->dev, + "spi master registered: bus_num=%d num_chipselect=%d\n", + master->bus_num, master->num_chipselect); + + return 0; + +err_register: + free_irq(hw->irq, hw); + +err_no_irq: + au1550_spi_dma_rxtmp_free(hw); + +err_dma_rxtmp_alloc: +err_no_rxdma_descr: + if (hw->usedma) + au1xxx_dbdma_chan_free(hw->dma_rx_ch); + +err_no_rxdma: +err_no_txdma_descr: + if (hw->usedma) + au1xxx_dbdma_chan_free(hw->dma_tx_ch); + +err_no_txdma: + iounmap((void __iomem *)hw->regs); + +err_ioremap: + release_resource(hw->ioarea); + kfree(hw->ioarea); + +err_no_iores: +err_no_pdata: + spi_master_put(hw->master); + +err_nomem: + return err; +} + +static int __exit au1550_spi_remove(struct platform_device *pdev) +{ + struct au1550_spi *hw = platform_get_drvdata(pdev); + + dev_info(&pdev->dev, "spi master remove: bus_num=%d\n", + hw->master->bus_num); + + spi_bitbang_stop(&hw->bitbang); + free_irq(hw->irq, hw); + iounmap((void __iomem *)hw->regs); + release_resource(hw->ioarea); + kfree(hw->ioarea); + + if (hw->usedma) { + au1550_spi_dma_rxtmp_free(hw); + au1xxx_dbdma_chan_free(hw->dma_rx_ch); + au1xxx_dbdma_chan_free(hw->dma_tx_ch); + } + + platform_set_drvdata(pdev, NULL); + + spi_master_put(hw->master); + return 0; +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:au1550-spi"); + +static struct platform_driver au1550_spi_drv = { + .remove = __exit_p(au1550_spi_remove), + .driver = { + .name = "au1550-spi", + .owner = THIS_MODULE, + }, +}; + +static int __init au1550_spi_init(void) +{ + /* + * create memory device with 8 bits dev_devwidth + * needed for proper byte ordering to spi fifo + */ + if (usedma) { + ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev); + if (!ddma_memid) + printk(KERN_ERR "au1550-spi: cannot add memory" + "dbdma device\n"); + } + return platform_driver_probe(&au1550_spi_drv, au1550_spi_probe); +} +module_init(au1550_spi_init); + +static void __exit au1550_spi_exit(void) +{ + if (usedma && ddma_memid) + au1xxx_ddma_del_device(ddma_memid); + platform_driver_unregister(&au1550_spi_drv); +} +module_exit(au1550_spi_exit); + +MODULE_DESCRIPTION("Au1550 PSC SPI Driver"); +MODULE_AUTHOR("Jan Nikitenko "); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c new file mode 100644 index 000000000000..e557ff617b11 --- /dev/null +++ b/drivers/spi/spi-bfin-sport.c @@ -0,0 +1,952 @@ +/* + * SPI bus via the Blackfin SPORT peripheral + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright 2009-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define DRV_NAME "bfin-sport-spi" +#define DRV_DESC "SPI bus via the Blackfin SPORT" + +MODULE_AUTHOR("Cliff Cai"); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bfin-sport-spi"); + +enum bfin_sport_spi_state { + START_STATE, + RUNNING_STATE, + DONE_STATE, + ERROR_STATE, +}; + +struct bfin_sport_spi_master_data; + +struct bfin_sport_transfer_ops { + void (*write) (struct bfin_sport_spi_master_data *); + void (*read) (struct bfin_sport_spi_master_data *); + void (*duplex) (struct bfin_sport_spi_master_data *); +}; + +struct bfin_sport_spi_master_data { + /* Driver model hookup */ + struct device *dev; + + /* SPI framework hookup */ + struct spi_master *master; + + /* Regs base of SPI controller */ + struct sport_register __iomem *regs; + int err_irq; + + /* Pin request list */ + u16 *pin_req; + + /* Driver message queue */ + struct workqueue_struct *workqueue; + struct work_struct pump_messages; + spinlock_t lock; + struct list_head queue; + int busy; + bool run; + + /* Message Transfer pump */ + struct tasklet_struct pump_transfers; + + /* Current message transfer state info */ + enum bfin_sport_spi_state state; + struct spi_message *cur_msg; + struct spi_transfer *cur_transfer; + struct bfin_sport_spi_slave_data *cur_chip; + union { + void *tx; + u8 *tx8; + u16 *tx16; + }; + void *tx_end; + union { + void *rx; + u8 *rx8; + u16 *rx16; + }; + void *rx_end; + + int cs_change; + struct bfin_sport_transfer_ops *ops; +}; + +struct bfin_sport_spi_slave_data { + u16 ctl_reg; + u16 baud; + u16 cs_chg_udelay; /* Some devices require > 255usec delay */ + u32 cs_gpio; + u16 idle_tx_val; + struct bfin_sport_transfer_ops *ops; +}; + +static void +bfin_sport_spi_enable(struct bfin_sport_spi_master_data *drv_data) +{ + bfin_write_or(&drv_data->regs->tcr1, TSPEN); + bfin_write_or(&drv_data->regs->rcr1, TSPEN); + SSYNC(); +} + +static void +bfin_sport_spi_disable(struct bfin_sport_spi_master_data *drv_data) +{ + bfin_write_and(&drv_data->regs->tcr1, ~TSPEN); + bfin_write_and(&drv_data->regs->rcr1, ~TSPEN); + SSYNC(); +} + +/* Caculate the SPI_BAUD register value based on input HZ */ +static u16 +bfin_sport_hz_to_spi_baud(u32 speed_hz) +{ + u_long clk, sclk = get_sclk(); + int div = (sclk / (2 * speed_hz)) - 1; + + if (div < 0) + div = 0; + + clk = sclk / (2 * (div + 1)); + + if (clk > speed_hz) + div++; + + return div; +} + +/* Chip select operation functions for cs_change flag */ +static void +bfin_sport_spi_cs_active(struct bfin_sport_spi_slave_data *chip) +{ + gpio_direction_output(chip->cs_gpio, 0); +} + +static void +bfin_sport_spi_cs_deactive(struct bfin_sport_spi_slave_data *chip) +{ + gpio_direction_output(chip->cs_gpio, 1); + /* Move delay here for consistency */ + if (chip->cs_chg_udelay) + udelay(chip->cs_chg_udelay); +} + +static void +bfin_sport_spi_stat_poll_complete(struct bfin_sport_spi_master_data *drv_data) +{ + unsigned long timeout = jiffies + HZ; + while (!(bfin_read(&drv_data->regs->stat) & RXNE)) { + if (!time_before(jiffies, timeout)) + break; + } +} + +static void +bfin_sport_spi_u8_writer(struct bfin_sport_spi_master_data *drv_data) +{ + u16 dummy; + + while (drv_data->tx < drv_data->tx_end) { + bfin_write(&drv_data->regs->tx16, *drv_data->tx8++); + bfin_sport_spi_stat_poll_complete(drv_data); + dummy = bfin_read(&drv_data->regs->rx16); + } +} + +static void +bfin_sport_spi_u8_reader(struct bfin_sport_spi_master_data *drv_data) +{ + u16 tx_val = drv_data->cur_chip->idle_tx_val; + + while (drv_data->rx < drv_data->rx_end) { + bfin_write(&drv_data->regs->tx16, tx_val); + bfin_sport_spi_stat_poll_complete(drv_data); + *drv_data->rx8++ = bfin_read(&drv_data->regs->rx16); + } +} + +static void +bfin_sport_spi_u8_duplex(struct bfin_sport_spi_master_data *drv_data) +{ + while (drv_data->rx < drv_data->rx_end) { + bfin_write(&drv_data->regs->tx16, *drv_data->tx8++); + bfin_sport_spi_stat_poll_complete(drv_data); + *drv_data->rx8++ = bfin_read(&drv_data->regs->rx16); + } +} + +static struct bfin_sport_transfer_ops bfin_sport_transfer_ops_u8 = { + .write = bfin_sport_spi_u8_writer, + .read = bfin_sport_spi_u8_reader, + .duplex = bfin_sport_spi_u8_duplex, +}; + +static void +bfin_sport_spi_u16_writer(struct bfin_sport_spi_master_data *drv_data) +{ + u16 dummy; + + while (drv_data->tx < drv_data->tx_end) { + bfin_write(&drv_data->regs->tx16, *drv_data->tx16++); + bfin_sport_spi_stat_poll_complete(drv_data); + dummy = bfin_read(&drv_data->regs->rx16); + } +} + +static void +bfin_sport_spi_u16_reader(struct bfin_sport_spi_master_data *drv_data) +{ + u16 tx_val = drv_data->cur_chip->idle_tx_val; + + while (drv_data->rx < drv_data->rx_end) { + bfin_write(&drv_data->regs->tx16, tx_val); + bfin_sport_spi_stat_poll_complete(drv_data); + *drv_data->rx16++ = bfin_read(&drv_data->regs->rx16); + } +} + +static void +bfin_sport_spi_u16_duplex(struct bfin_sport_spi_master_data *drv_data) +{ + while (drv_data->rx < drv_data->rx_end) { + bfin_write(&drv_data->regs->tx16, *drv_data->tx16++); + bfin_sport_spi_stat_poll_complete(drv_data); + *drv_data->rx16++ = bfin_read(&drv_data->regs->rx16); + } +} + +static struct bfin_sport_transfer_ops bfin_sport_transfer_ops_u16 = { + .write = bfin_sport_spi_u16_writer, + .read = bfin_sport_spi_u16_reader, + .duplex = bfin_sport_spi_u16_duplex, +}; + +/* stop controller and re-config current chip */ +static void +bfin_sport_spi_restore_state(struct bfin_sport_spi_master_data *drv_data) +{ + struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip; + unsigned int bits = (drv_data->ops == &bfin_sport_transfer_ops_u8 ? 7 : 15); + + bfin_sport_spi_disable(drv_data); + dev_dbg(drv_data->dev, "restoring spi ctl state\n"); + + bfin_write(&drv_data->regs->tcr1, chip->ctl_reg); + bfin_write(&drv_data->regs->tcr2, bits); + bfin_write(&drv_data->regs->tclkdiv, chip->baud); + bfin_write(&drv_data->regs->tfsdiv, bits); + SSYNC(); + + bfin_write(&drv_data->regs->rcr1, chip->ctl_reg & ~(ITCLK | ITFS)); + bfin_write(&drv_data->regs->rcr2, bits); + SSYNC(); + + bfin_sport_spi_cs_active(chip); +} + +/* test if there is more transfer to be done */ +static enum bfin_sport_spi_state +bfin_sport_spi_next_transfer(struct bfin_sport_spi_master_data *drv_data) +{ + struct spi_message *msg = drv_data->cur_msg; + struct spi_transfer *trans = drv_data->cur_transfer; + + /* Move to next transfer */ + if (trans->transfer_list.next != &msg->transfers) { + drv_data->cur_transfer = + list_entry(trans->transfer_list.next, + struct spi_transfer, transfer_list); + return RUNNING_STATE; + } + + return DONE_STATE; +} + +/* + * caller already set message->status; + * dma and pio irqs are blocked give finished message back + */ +static void +bfin_sport_spi_giveback(struct bfin_sport_spi_master_data *drv_data) +{ + struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip; + unsigned long flags; + struct spi_message *msg; + + spin_lock_irqsave(&drv_data->lock, flags); + msg = drv_data->cur_msg; + drv_data->state = START_STATE; + drv_data->cur_msg = NULL; + drv_data->cur_transfer = NULL; + drv_data->cur_chip = NULL; + queue_work(drv_data->workqueue, &drv_data->pump_messages); + spin_unlock_irqrestore(&drv_data->lock, flags); + + if (!drv_data->cs_change) + bfin_sport_spi_cs_deactive(chip); + + if (msg->complete) + msg->complete(msg->context); +} + +static irqreturn_t +sport_err_handler(int irq, void *dev_id) +{ + struct bfin_sport_spi_master_data *drv_data = dev_id; + u16 status; + + dev_dbg(drv_data->dev, "%s enter\n", __func__); + status = bfin_read(&drv_data->regs->stat) & (TOVF | TUVF | ROVF | RUVF); + + if (status) { + bfin_write(&drv_data->regs->stat, status); + SSYNC(); + + bfin_sport_spi_disable(drv_data); + dev_err(drv_data->dev, "status error:%s%s%s%s\n", + status & TOVF ? " TOVF" : "", + status & TUVF ? " TUVF" : "", + status & ROVF ? " ROVF" : "", + status & RUVF ? " RUVF" : ""); + } + + return IRQ_HANDLED; +} + +static void +bfin_sport_spi_pump_transfers(unsigned long data) +{ + struct bfin_sport_spi_master_data *drv_data = (void *)data; + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + struct bfin_sport_spi_slave_data *chip = NULL; + unsigned int bits_per_word; + u32 tranf_success = 1; + u32 transfer_speed; + u8 full_duplex = 0; + + /* Get current state information */ + message = drv_data->cur_msg; + transfer = drv_data->cur_transfer; + chip = drv_data->cur_chip; + + if (transfer->speed_hz) + transfer_speed = bfin_sport_hz_to_spi_baud(transfer->speed_hz); + else + transfer_speed = chip->baud; + bfin_write(&drv_data->regs->tclkdiv, transfer_speed); + SSYNC(); + + /* + * if msg is error or done, report it back using complete() callback + */ + + /* Handle for abort */ + if (drv_data->state == ERROR_STATE) { + dev_dbg(drv_data->dev, "transfer: we've hit an error\n"); + message->status = -EIO; + bfin_sport_spi_giveback(drv_data); + return; + } + + /* Handle end of message */ + if (drv_data->state == DONE_STATE) { + dev_dbg(drv_data->dev, "transfer: all done!\n"); + message->status = 0; + bfin_sport_spi_giveback(drv_data); + return; + } + + /* Delay if requested at end of transfer */ + if (drv_data->state == RUNNING_STATE) { + dev_dbg(drv_data->dev, "transfer: still running ...\n"); + previous = list_entry(transfer->transfer_list.prev, + struct spi_transfer, transfer_list); + if (previous->delay_usecs) + udelay(previous->delay_usecs); + } + + if (transfer->len == 0) { + /* Move to next transfer of this msg */ + drv_data->state = bfin_sport_spi_next_transfer(drv_data); + /* Schedule next transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); + } + + if (transfer->tx_buf != NULL) { + drv_data->tx = (void *)transfer->tx_buf; + drv_data->tx_end = drv_data->tx + transfer->len; + dev_dbg(drv_data->dev, "tx_buf is %p, tx_end is %p\n", + transfer->tx_buf, drv_data->tx_end); + } else + drv_data->tx = NULL; + + if (transfer->rx_buf != NULL) { + full_duplex = transfer->tx_buf != NULL; + drv_data->rx = transfer->rx_buf; + drv_data->rx_end = drv_data->rx + transfer->len; + dev_dbg(drv_data->dev, "rx_buf is %p, rx_end is %p\n", + transfer->rx_buf, drv_data->rx_end); + } else + drv_data->rx = NULL; + + drv_data->cs_change = transfer->cs_change; + + /* Bits per word setup */ + bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; + if (bits_per_word == 8) + drv_data->ops = &bfin_sport_transfer_ops_u8; + else + drv_data->ops = &bfin_sport_transfer_ops_u16; + + drv_data->state = RUNNING_STATE; + + if (drv_data->cs_change) + bfin_sport_spi_cs_active(chip); + + dev_dbg(drv_data->dev, + "now pumping a transfer: width is %d, len is %d\n", + bits_per_word, transfer->len); + + /* PIO mode write then read */ + dev_dbg(drv_data->dev, "doing IO transfer\n"); + + bfin_sport_spi_enable(drv_data); + if (full_duplex) { + /* full duplex mode */ + BUG_ON((drv_data->tx_end - drv_data->tx) != + (drv_data->rx_end - drv_data->rx)); + drv_data->ops->duplex(drv_data); + + if (drv_data->tx != drv_data->tx_end) + tranf_success = 0; + } else if (drv_data->tx != NULL) { + /* write only half duplex */ + + drv_data->ops->write(drv_data); + + if (drv_data->tx != drv_data->tx_end) + tranf_success = 0; + } else if (drv_data->rx != NULL) { + /* read only half duplex */ + + drv_data->ops->read(drv_data); + if (drv_data->rx != drv_data->rx_end) + tranf_success = 0; + } + bfin_sport_spi_disable(drv_data); + + if (!tranf_success) { + dev_dbg(drv_data->dev, "IO write error!\n"); + drv_data->state = ERROR_STATE; + } else { + /* Update total byte transfered */ + message->actual_length += transfer->len; + /* Move to next transfer of this msg */ + drv_data->state = bfin_sport_spi_next_transfer(drv_data); + if (drv_data->cs_change) + bfin_sport_spi_cs_deactive(chip); + } + + /* Schedule next transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); +} + +/* pop a msg from queue and kick off real transfer */ +static void +bfin_sport_spi_pump_messages(struct work_struct *work) +{ + struct bfin_sport_spi_master_data *drv_data; + unsigned long flags; + struct spi_message *next_msg; + + drv_data = container_of(work, struct bfin_sport_spi_master_data, pump_messages); + + /* Lock queue and check for queue work */ + spin_lock_irqsave(&drv_data->lock, flags); + if (list_empty(&drv_data->queue) || !drv_data->run) { + /* pumper kicked off but no work to do */ + drv_data->busy = 0; + spin_unlock_irqrestore(&drv_data->lock, flags); + return; + } + + /* Make sure we are not already running a message */ + if (drv_data->cur_msg) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return; + } + + /* Extract head of queue */ + next_msg = list_entry(drv_data->queue.next, + struct spi_message, queue); + + drv_data->cur_msg = next_msg; + + /* Setup the SSP using the per chip configuration */ + drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); + + list_del_init(&drv_data->cur_msg->queue); + + /* Initialize message state */ + drv_data->cur_msg->state = START_STATE; + drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, + struct spi_transfer, transfer_list); + bfin_sport_spi_restore_state(drv_data); + dev_dbg(drv_data->dev, "got a message to pump, " + "state is set to: baud %d, cs_gpio %i, ctl 0x%x\n", + drv_data->cur_chip->baud, drv_data->cur_chip->cs_gpio, + drv_data->cur_chip->ctl_reg); + + dev_dbg(drv_data->dev, + "the first transfer len is %d\n", + drv_data->cur_transfer->len); + + /* Mark as busy and launch transfers */ + tasklet_schedule(&drv_data->pump_transfers); + + drv_data->busy = 1; + spin_unlock_irqrestore(&drv_data->lock, flags); +} + +/* + * got a msg to transfer, queue it in drv_data->queue. + * And kick off message pumper + */ +static int +bfin_sport_spi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct bfin_sport_spi_master_data *drv_data = spi_master_get_devdata(spi->master); + unsigned long flags; + + spin_lock_irqsave(&drv_data->lock, flags); + + if (!drv_data->run) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return -ESHUTDOWN; + } + + msg->actual_length = 0; + msg->status = -EINPROGRESS; + msg->state = START_STATE; + + dev_dbg(&spi->dev, "adding an msg in transfer()\n"); + list_add_tail(&msg->queue, &drv_data->queue); + + if (drv_data->run && !drv_data->busy) + queue_work(drv_data->workqueue, &drv_data->pump_messages); + + spin_unlock_irqrestore(&drv_data->lock, flags); + + return 0; +} + +/* Called every time common spi devices change state */ +static int +bfin_sport_spi_setup(struct spi_device *spi) +{ + struct bfin_sport_spi_slave_data *chip, *first = NULL; + int ret; + + /* Only alloc (or use chip_info) on first setup */ + chip = spi_get_ctldata(spi); + if (chip == NULL) { + struct bfin5xx_spi_chip *chip_info; + + chip = first = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + /* platform chip_info isn't required */ + chip_info = spi->controller_data; + if (chip_info) { + /* + * DITFS and TDTYPE are only thing we don't set, but + * they probably shouldn't be changed by people. + */ + if (chip_info->ctl_reg || chip_info->enable_dma) { + ret = -EINVAL; + dev_err(&spi->dev, "don't set ctl_reg/enable_dma fields"); + goto error; + } + chip->cs_chg_udelay = chip_info->cs_chg_udelay; + chip->idle_tx_val = chip_info->idle_tx_val; + spi->bits_per_word = chip_info->bits_per_word; + } + } + + if (spi->bits_per_word != 8 && spi->bits_per_word != 16) { + ret = -EINVAL; + goto error; + } + + /* translate common spi framework into our register + * following configure contents are same for tx and rx. + */ + + if (spi->mode & SPI_CPHA) + chip->ctl_reg &= ~TCKFE; + else + chip->ctl_reg |= TCKFE; + + if (spi->mode & SPI_LSB_FIRST) + chip->ctl_reg |= TLSBIT; + else + chip->ctl_reg &= ~TLSBIT; + + /* Sport in master mode */ + chip->ctl_reg |= ITCLK | ITFS | TFSR | LATFS | LTFS; + + chip->baud = bfin_sport_hz_to_spi_baud(spi->max_speed_hz); + + chip->cs_gpio = spi->chip_select; + ret = gpio_request(chip->cs_gpio, spi->modalias); + if (ret) + goto error; + + dev_dbg(&spi->dev, "setup spi chip %s, width is %d\n", + spi->modalias, spi->bits_per_word); + dev_dbg(&spi->dev, "ctl_reg is 0x%x, GPIO is %i\n", + chip->ctl_reg, spi->chip_select); + + spi_set_ctldata(spi, chip); + + bfin_sport_spi_cs_deactive(chip); + + return ret; + + error: + kfree(first); + return ret; +} + +/* + * callback for spi framework. + * clean driver specific data + */ +static void +bfin_sport_spi_cleanup(struct spi_device *spi) +{ + struct bfin_sport_spi_slave_data *chip = spi_get_ctldata(spi); + + if (!chip) + return; + + gpio_free(chip->cs_gpio); + + kfree(chip); +} + +static int +bfin_sport_spi_init_queue(struct bfin_sport_spi_master_data *drv_data) +{ + INIT_LIST_HEAD(&drv_data->queue); + spin_lock_init(&drv_data->lock); + + drv_data->run = false; + drv_data->busy = 0; + + /* init transfer tasklet */ + tasklet_init(&drv_data->pump_transfers, + bfin_sport_spi_pump_transfers, (unsigned long)drv_data); + + /* init messages workqueue */ + INIT_WORK(&drv_data->pump_messages, bfin_sport_spi_pump_messages); + drv_data->workqueue = + create_singlethread_workqueue(dev_name(drv_data->master->dev.parent)); + if (drv_data->workqueue == NULL) + return -EBUSY; + + return 0; +} + +static int +bfin_sport_spi_start_queue(struct bfin_sport_spi_master_data *drv_data) +{ + unsigned long flags; + + spin_lock_irqsave(&drv_data->lock, flags); + + if (drv_data->run || drv_data->busy) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return -EBUSY; + } + + drv_data->run = true; + drv_data->cur_msg = NULL; + drv_data->cur_transfer = NULL; + drv_data->cur_chip = NULL; + spin_unlock_irqrestore(&drv_data->lock, flags); + + queue_work(drv_data->workqueue, &drv_data->pump_messages); + + return 0; +} + +static inline int +bfin_sport_spi_stop_queue(struct bfin_sport_spi_master_data *drv_data) +{ + unsigned long flags; + unsigned limit = 500; + int status = 0; + + spin_lock_irqsave(&drv_data->lock, flags); + + /* + * This is a bit lame, but is optimized for the common execution path. + * A wait_queue on the drv_data->busy could be used, but then the common + * execution path (pump_messages) would be required to call wake_up or + * friends on every SPI message. Do this instead + */ + drv_data->run = false; + while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { + spin_unlock_irqrestore(&drv_data->lock, flags); + msleep(10); + spin_lock_irqsave(&drv_data->lock, flags); + } + + if (!list_empty(&drv_data->queue) || drv_data->busy) + status = -EBUSY; + + spin_unlock_irqrestore(&drv_data->lock, flags); + + return status; +} + +static inline int +bfin_sport_spi_destroy_queue(struct bfin_sport_spi_master_data *drv_data) +{ + int status; + + status = bfin_sport_spi_stop_queue(drv_data); + if (status) + return status; + + destroy_workqueue(drv_data->workqueue); + + return 0; +} + +static int __devinit +bfin_sport_spi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bfin5xx_spi_master *platform_info; + struct spi_master *master; + struct resource *res, *ires; + struct bfin_sport_spi_master_data *drv_data; + int status; + + platform_info = dev->platform_data; + + /* Allocate master with space for drv_data */ + master = spi_alloc_master(dev, sizeof(*master) + 16); + if (!master) { + dev_err(dev, "cannot alloc spi_master\n"); + return -ENOMEM; + } + + drv_data = spi_master_get_devdata(master); + drv_data->master = master; + drv_data->dev = dev; + drv_data->pin_req = platform_info->pin_req; + + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; + master->bus_num = pdev->id; + master->num_chipselect = platform_info->num_chipselect; + master->cleanup = bfin_sport_spi_cleanup; + master->setup = bfin_sport_spi_setup; + master->transfer = bfin_sport_spi_transfer; + + /* Find and map our resources */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(dev, "cannot get IORESOURCE_MEM\n"); + status = -ENOENT; + goto out_error_get_res; + } + + drv_data->regs = ioremap(res->start, resource_size(res)); + if (drv_data->regs == NULL) { + dev_err(dev, "cannot map registers\n"); + status = -ENXIO; + goto out_error_ioremap; + } + + ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!ires) { + dev_err(dev, "cannot get IORESOURCE_IRQ\n"); + status = -ENODEV; + goto out_error_get_ires; + } + drv_data->err_irq = ires->start; + + /* Initial and start queue */ + status = bfin_sport_spi_init_queue(drv_data); + if (status) { + dev_err(dev, "problem initializing queue\n"); + goto out_error_queue_alloc; + } + + status = bfin_sport_spi_start_queue(drv_data); + if (status) { + dev_err(dev, "problem starting queue\n"); + goto out_error_queue_alloc; + } + + status = request_irq(drv_data->err_irq, sport_err_handler, + 0, "sport_spi_err", drv_data); + if (status) { + dev_err(dev, "unable to request sport err irq\n"); + goto out_error_irq; + } + + status = peripheral_request_list(drv_data->pin_req, DRV_NAME); + if (status) { + dev_err(dev, "requesting peripherals failed\n"); + goto out_error_peripheral; + } + + /* Register with the SPI framework */ + platform_set_drvdata(pdev, drv_data); + status = spi_register_master(master); + if (status) { + dev_err(dev, "problem registering spi master\n"); + goto out_error_master; + } + + dev_info(dev, "%s, regs_base@%p\n", DRV_DESC, drv_data->regs); + return 0; + + out_error_master: + peripheral_free_list(drv_data->pin_req); + out_error_peripheral: + free_irq(drv_data->err_irq, drv_data); + out_error_irq: + out_error_queue_alloc: + bfin_sport_spi_destroy_queue(drv_data); + out_error_get_ires: + iounmap(drv_data->regs); + out_error_ioremap: + out_error_get_res: + spi_master_put(master); + + return status; +} + +/* stop hardware and remove the driver */ +static int __devexit +bfin_sport_spi_remove(struct platform_device *pdev) +{ + struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev); + int status = 0; + + if (!drv_data) + return 0; + + /* Remove the queue */ + status = bfin_sport_spi_destroy_queue(drv_data); + if (status) + return status; + + /* Disable the SSP at the peripheral and SOC level */ + bfin_sport_spi_disable(drv_data); + + /* Disconnect from the SPI framework */ + spi_unregister_master(drv_data->master); + + peripheral_free_list(drv_data->pin_req); + + /* Prevent double remove */ + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int +bfin_sport_spi_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev); + int status; + + status = bfin_sport_spi_stop_queue(drv_data); + if (status) + return status; + + /* stop hardware */ + bfin_sport_spi_disable(drv_data); + + return status; +} + +static int +bfin_sport_spi_resume(struct platform_device *pdev) +{ + struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev); + int status; + + /* Enable the SPI interface */ + bfin_sport_spi_enable(drv_data); + + /* Start the queue running */ + status = bfin_sport_spi_start_queue(drv_data); + if (status) + dev_err(drv_data->dev, "problem resuming queue\n"); + + return status; +} +#else +# define bfin_sport_spi_suspend NULL +# define bfin_sport_spi_resume NULL +#endif + +static struct platform_driver bfin_sport_spi_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = bfin_sport_spi_probe, + .remove = __devexit_p(bfin_sport_spi_remove), + .suspend = bfin_sport_spi_suspend, + .resume = bfin_sport_spi_resume, +}; + +static int __init bfin_sport_spi_init(void) +{ + return platform_driver_register(&bfin_sport_spi_driver); +} +module_init(bfin_sport_spi_init); + +static void __exit bfin_sport_spi_exit(void) +{ + platform_driver_unregister(&bfin_sport_spi_driver); +} +module_exit(bfin_sport_spi_exit); diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c new file mode 100644 index 000000000000..f706dba165cf --- /dev/null +++ b/drivers/spi/spi-bfin5xx.c @@ -0,0 +1,1530 @@ +/* + * Blackfin On-Chip SPI Driver + * + * Copyright 2004-2010 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define DRV_NAME "bfin-spi" +#define DRV_AUTHOR "Bryan Wu, Luke Yang" +#define DRV_DESC "Blackfin on-chip SPI Controller Driver" +#define DRV_VERSION "1.0" + +MODULE_AUTHOR(DRV_AUTHOR); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_LICENSE("GPL"); + +#define START_STATE ((void *)0) +#define RUNNING_STATE ((void *)1) +#define DONE_STATE ((void *)2) +#define ERROR_STATE ((void *)-1) + +struct bfin_spi_master_data; + +struct bfin_spi_transfer_ops { + void (*write) (struct bfin_spi_master_data *); + void (*read) (struct bfin_spi_master_data *); + void (*duplex) (struct bfin_spi_master_data *); +}; + +struct bfin_spi_master_data { + /* Driver model hookup */ + struct platform_device *pdev; + + /* SPI framework hookup */ + struct spi_master *master; + + /* Regs base of SPI controller */ + void __iomem *regs_base; + + /* Pin request list */ + u16 *pin_req; + + /* BFIN hookup */ + struct bfin5xx_spi_master *master_info; + + /* Driver message queue */ + struct workqueue_struct *workqueue; + struct work_struct pump_messages; + spinlock_t lock; + struct list_head queue; + int busy; + bool running; + + /* Message Transfer pump */ + struct tasklet_struct pump_transfers; + + /* Current message transfer state info */ + struct spi_message *cur_msg; + struct spi_transfer *cur_transfer; + struct bfin_spi_slave_data *cur_chip; + size_t len_in_bytes; + size_t len; + void *tx; + void *tx_end; + void *rx; + void *rx_end; + + /* DMA stuffs */ + int dma_channel; + int dma_mapped; + int dma_requested; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + + int irq_requested; + int spi_irq; + + size_t rx_map_len; + size_t tx_map_len; + u8 n_bytes; + u16 ctrl_reg; + u16 flag_reg; + + int cs_change; + const struct bfin_spi_transfer_ops *ops; +}; + +struct bfin_spi_slave_data { + u16 ctl_reg; + u16 baud; + u16 flag; + + u8 chip_select_num; + u8 enable_dma; + u16 cs_chg_udelay; /* Some devices require > 255usec delay */ + u32 cs_gpio; + u16 idle_tx_val; + u8 pio_interrupt; /* use spi data irq */ + const struct bfin_spi_transfer_ops *ops; +}; + +#define DEFINE_SPI_REG(reg, off) \ +static inline u16 read_##reg(struct bfin_spi_master_data *drv_data) \ + { return bfin_read16(drv_data->regs_base + off); } \ +static inline void write_##reg(struct bfin_spi_master_data *drv_data, u16 v) \ + { bfin_write16(drv_data->regs_base + off, v); } + +DEFINE_SPI_REG(CTRL, 0x00) +DEFINE_SPI_REG(FLAG, 0x04) +DEFINE_SPI_REG(STAT, 0x08) +DEFINE_SPI_REG(TDBR, 0x0C) +DEFINE_SPI_REG(RDBR, 0x10) +DEFINE_SPI_REG(BAUD, 0x14) +DEFINE_SPI_REG(SHAW, 0x18) + +static void bfin_spi_enable(struct bfin_spi_master_data *drv_data) +{ + u16 cr; + + cr = read_CTRL(drv_data); + write_CTRL(drv_data, (cr | BIT_CTL_ENABLE)); +} + +static void bfin_spi_disable(struct bfin_spi_master_data *drv_data) +{ + u16 cr; + + cr = read_CTRL(drv_data); + write_CTRL(drv_data, (cr & (~BIT_CTL_ENABLE))); +} + +/* Caculate the SPI_BAUD register value based on input HZ */ +static u16 hz_to_spi_baud(u32 speed_hz) +{ + u_long sclk = get_sclk(); + u16 spi_baud = (sclk / (2 * speed_hz)); + + if ((sclk % (2 * speed_hz)) > 0) + spi_baud++; + + if (spi_baud < MIN_SPI_BAUD_VAL) + spi_baud = MIN_SPI_BAUD_VAL; + + return spi_baud; +} + +static int bfin_spi_flush(struct bfin_spi_master_data *drv_data) +{ + unsigned long limit = loops_per_jiffy << 1; + + /* wait for stop and clear stat */ + while (!(read_STAT(drv_data) & BIT_STAT_SPIF) && --limit) + cpu_relax(); + + write_STAT(drv_data, BIT_STAT_CLR); + + return limit; +} + +/* Chip select operation functions for cs_change flag */ +static void bfin_spi_cs_active(struct bfin_spi_master_data *drv_data, struct bfin_spi_slave_data *chip) +{ + if (likely(chip->chip_select_num < MAX_CTRL_CS)) { + u16 flag = read_FLAG(drv_data); + + flag &= ~chip->flag; + + write_FLAG(drv_data, flag); + } else { + gpio_set_value(chip->cs_gpio, 0); + } +} + +static void bfin_spi_cs_deactive(struct bfin_spi_master_data *drv_data, + struct bfin_spi_slave_data *chip) +{ + if (likely(chip->chip_select_num < MAX_CTRL_CS)) { + u16 flag = read_FLAG(drv_data); + + flag |= chip->flag; + + write_FLAG(drv_data, flag); + } else { + gpio_set_value(chip->cs_gpio, 1); + } + + /* Move delay here for consistency */ + if (chip->cs_chg_udelay) + udelay(chip->cs_chg_udelay); +} + +/* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */ +static inline void bfin_spi_cs_enable(struct bfin_spi_master_data *drv_data, + struct bfin_spi_slave_data *chip) +{ + if (chip->chip_select_num < MAX_CTRL_CS) { + u16 flag = read_FLAG(drv_data); + + flag |= (chip->flag >> 8); + + write_FLAG(drv_data, flag); + } +} + +static inline void bfin_spi_cs_disable(struct bfin_spi_master_data *drv_data, + struct bfin_spi_slave_data *chip) +{ + if (chip->chip_select_num < MAX_CTRL_CS) { + u16 flag = read_FLAG(drv_data); + + flag &= ~(chip->flag >> 8); + + write_FLAG(drv_data, flag); + } +} + +/* stop controller and re-config current chip*/ +static void bfin_spi_restore_state(struct bfin_spi_master_data *drv_data) +{ + struct bfin_spi_slave_data *chip = drv_data->cur_chip; + + /* Clear status and disable clock */ + write_STAT(drv_data, BIT_STAT_CLR); + bfin_spi_disable(drv_data); + dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n"); + + SSYNC(); + + /* Load the registers */ + write_CTRL(drv_data, chip->ctl_reg); + write_BAUD(drv_data, chip->baud); + + bfin_spi_enable(drv_data); + bfin_spi_cs_active(drv_data, chip); +} + +/* used to kick off transfer in rx mode and read unwanted RX data */ +static inline void bfin_spi_dummy_read(struct bfin_spi_master_data *drv_data) +{ + (void) read_RDBR(drv_data); +} + +static void bfin_spi_u8_writer(struct bfin_spi_master_data *drv_data) +{ + /* clear RXS (we check for RXS inside the loop) */ + bfin_spi_dummy_read(drv_data); + + while (drv_data->tx < drv_data->tx_end) { + write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); + /* wait until transfer finished. + checking SPIF or TXS may not guarantee transfer completion */ + while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + cpu_relax(); + /* discard RX data and clear RXS */ + bfin_spi_dummy_read(drv_data); + } +} + +static void bfin_spi_u8_reader(struct bfin_spi_master_data *drv_data) +{ + u16 tx_val = drv_data->cur_chip->idle_tx_val; + + /* discard old RX data and clear RXS */ + bfin_spi_dummy_read(drv_data); + + while (drv_data->rx < drv_data->rx_end) { + write_TDBR(drv_data, tx_val); + while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + cpu_relax(); + *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); + } +} + +static void bfin_spi_u8_duplex(struct bfin_spi_master_data *drv_data) +{ + /* discard old RX data and clear RXS */ + bfin_spi_dummy_read(drv_data); + + while (drv_data->rx < drv_data->rx_end) { + write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); + while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + cpu_relax(); + *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); + } +} + +static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8 = { + .write = bfin_spi_u8_writer, + .read = bfin_spi_u8_reader, + .duplex = bfin_spi_u8_duplex, +}; + +static void bfin_spi_u16_writer(struct bfin_spi_master_data *drv_data) +{ + /* clear RXS (we check for RXS inside the loop) */ + bfin_spi_dummy_read(drv_data); + + while (drv_data->tx < drv_data->tx_end) { + write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); + drv_data->tx += 2; + /* wait until transfer finished. + checking SPIF or TXS may not guarantee transfer completion */ + while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + cpu_relax(); + /* discard RX data and clear RXS */ + bfin_spi_dummy_read(drv_data); + } +} + +static void bfin_spi_u16_reader(struct bfin_spi_master_data *drv_data) +{ + u16 tx_val = drv_data->cur_chip->idle_tx_val; + + /* discard old RX data and clear RXS */ + bfin_spi_dummy_read(drv_data); + + while (drv_data->rx < drv_data->rx_end) { + write_TDBR(drv_data, tx_val); + while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + cpu_relax(); + *(u16 *) (drv_data->rx) = read_RDBR(drv_data); + drv_data->rx += 2; + } +} + +static void bfin_spi_u16_duplex(struct bfin_spi_master_data *drv_data) +{ + /* discard old RX data and clear RXS */ + bfin_spi_dummy_read(drv_data); + + while (drv_data->rx < drv_data->rx_end) { + write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); + drv_data->tx += 2; + while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + cpu_relax(); + *(u16 *) (drv_data->rx) = read_RDBR(drv_data); + drv_data->rx += 2; + } +} + +static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16 = { + .write = bfin_spi_u16_writer, + .read = bfin_spi_u16_reader, + .duplex = bfin_spi_u16_duplex, +}; + +/* test if there is more transfer to be done */ +static void *bfin_spi_next_transfer(struct bfin_spi_master_data *drv_data) +{ + struct spi_message *msg = drv_data->cur_msg; + struct spi_transfer *trans = drv_data->cur_transfer; + + /* Move to next transfer */ + if (trans->transfer_list.next != &msg->transfers) { + drv_data->cur_transfer = + list_entry(trans->transfer_list.next, + struct spi_transfer, transfer_list); + return RUNNING_STATE; + } else + return DONE_STATE; +} + +/* + * caller already set message->status; + * dma and pio irqs are blocked give finished message back + */ +static void bfin_spi_giveback(struct bfin_spi_master_data *drv_data) +{ + struct bfin_spi_slave_data *chip = drv_data->cur_chip; + struct spi_transfer *last_transfer; + unsigned long flags; + struct spi_message *msg; + + spin_lock_irqsave(&drv_data->lock, flags); + msg = drv_data->cur_msg; + drv_data->cur_msg = NULL; + drv_data->cur_transfer = NULL; + drv_data->cur_chip = NULL; + queue_work(drv_data->workqueue, &drv_data->pump_messages); + spin_unlock_irqrestore(&drv_data->lock, flags); + + last_transfer = list_entry(msg->transfers.prev, + struct spi_transfer, transfer_list); + + msg->state = NULL; + + if (!drv_data->cs_change) + bfin_spi_cs_deactive(drv_data, chip); + + /* Not stop spi in autobuffer mode */ + if (drv_data->tx_dma != 0xFFFF) + bfin_spi_disable(drv_data); + + if (msg->complete) + msg->complete(msg->context); +} + +/* spi data irq handler */ +static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) +{ + struct bfin_spi_master_data *drv_data = dev_id; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; + struct spi_message *msg = drv_data->cur_msg; + int n_bytes = drv_data->n_bytes; + int loop = 0; + + /* wait until transfer finished. */ + while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + cpu_relax(); + + if ((drv_data->tx && drv_data->tx >= drv_data->tx_end) || + (drv_data->rx && drv_data->rx >= (drv_data->rx_end - n_bytes))) { + /* last read */ + if (drv_data->rx) { + dev_dbg(&drv_data->pdev->dev, "last read\n"); + if (n_bytes % 2) { + u16 *buf = (u16 *)drv_data->rx; + for (loop = 0; loop < n_bytes / 2; loop++) + *buf++ = read_RDBR(drv_data); + } else { + u8 *buf = (u8 *)drv_data->rx; + for (loop = 0; loop < n_bytes; loop++) + *buf++ = read_RDBR(drv_data); + } + drv_data->rx += n_bytes; + } + + msg->actual_length += drv_data->len_in_bytes; + if (drv_data->cs_change) + bfin_spi_cs_deactive(drv_data, chip); + /* Move to next transfer */ + msg->state = bfin_spi_next_transfer(drv_data); + + disable_irq_nosync(drv_data->spi_irq); + + /* Schedule transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); + return IRQ_HANDLED; + } + + if (drv_data->rx && drv_data->tx) { + /* duplex */ + dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n"); + if (n_bytes % 2) { + u16 *buf = (u16 *)drv_data->rx; + u16 *buf2 = (u16 *)drv_data->tx; + for (loop = 0; loop < n_bytes / 2; loop++) { + *buf++ = read_RDBR(drv_data); + write_TDBR(drv_data, *buf2++); + } + } else { + u8 *buf = (u8 *)drv_data->rx; + u8 *buf2 = (u8 *)drv_data->tx; + for (loop = 0; loop < n_bytes; loop++) { + *buf++ = read_RDBR(drv_data); + write_TDBR(drv_data, *buf2++); + } + } + } else if (drv_data->rx) { + /* read */ + dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n"); + if (n_bytes % 2) { + u16 *buf = (u16 *)drv_data->rx; + for (loop = 0; loop < n_bytes / 2; loop++) { + *buf++ = read_RDBR(drv_data); + write_TDBR(drv_data, chip->idle_tx_val); + } + } else { + u8 *buf = (u8 *)drv_data->rx; + for (loop = 0; loop < n_bytes; loop++) { + *buf++ = read_RDBR(drv_data); + write_TDBR(drv_data, chip->idle_tx_val); + } + } + } else if (drv_data->tx) { + /* write */ + dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n"); + if (n_bytes % 2) { + u16 *buf = (u16 *)drv_data->tx; + for (loop = 0; loop < n_bytes / 2; loop++) { + read_RDBR(drv_data); + write_TDBR(drv_data, *buf++); + } + } else { + u8 *buf = (u8 *)drv_data->tx; + for (loop = 0; loop < n_bytes; loop++) { + read_RDBR(drv_data); + write_TDBR(drv_data, *buf++); + } + } + } + + if (drv_data->tx) + drv_data->tx += n_bytes; + if (drv_data->rx) + drv_data->rx += n_bytes; + + return IRQ_HANDLED; +} + +static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) +{ + struct bfin_spi_master_data *drv_data = dev_id; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; + struct spi_message *msg = drv_data->cur_msg; + unsigned long timeout; + unsigned short dmastat = get_dma_curr_irqstat(drv_data->dma_channel); + u16 spistat = read_STAT(drv_data); + + dev_dbg(&drv_data->pdev->dev, + "in dma_irq_handler dmastat:0x%x spistat:0x%x\n", + dmastat, spistat); + + if (drv_data->rx != NULL) { + u16 cr = read_CTRL(drv_data); + /* discard old RX data and clear RXS */ + bfin_spi_dummy_read(drv_data); + write_CTRL(drv_data, cr & ~BIT_CTL_ENABLE); /* Disable SPI */ + write_CTRL(drv_data, cr & ~BIT_CTL_TIMOD); /* Restore State */ + write_STAT(drv_data, BIT_STAT_CLR); /* Clear Status */ + } + + clear_dma_irqstat(drv_data->dma_channel); + + /* + * wait for the last transaction shifted out. HRM states: + * at this point there may still be data in the SPI DMA FIFO waiting + * to be transmitted ... software needs to poll TXS in the SPI_STAT + * register until it goes low for 2 successive reads + */ + if (drv_data->tx != NULL) { + while ((read_STAT(drv_data) & BIT_STAT_TXS) || + (read_STAT(drv_data) & BIT_STAT_TXS)) + cpu_relax(); + } + + dev_dbg(&drv_data->pdev->dev, + "in dma_irq_handler dmastat:0x%x spistat:0x%x\n", + dmastat, read_STAT(drv_data)); + + timeout = jiffies + HZ; + while (!(read_STAT(drv_data) & BIT_STAT_SPIF)) + if (!time_before(jiffies, timeout)) { + dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF"); + break; + } else + cpu_relax(); + + if ((dmastat & DMA_ERR) && (spistat & BIT_STAT_RBSY)) { + msg->state = ERROR_STATE; + dev_err(&drv_data->pdev->dev, "dma receive: fifo/buffer overflow\n"); + } else { + msg->actual_length += drv_data->len_in_bytes; + + if (drv_data->cs_change) + bfin_spi_cs_deactive(drv_data, chip); + + /* Move to next transfer */ + msg->state = bfin_spi_next_transfer(drv_data); + } + + /* Schedule transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); + + /* free the irq handler before next transfer */ + dev_dbg(&drv_data->pdev->dev, + "disable dma channel irq%d\n", + drv_data->dma_channel); + dma_disable_irq_nosync(drv_data->dma_channel); + + return IRQ_HANDLED; +} + +static void bfin_spi_pump_transfers(unsigned long data) +{ + struct bfin_spi_master_data *drv_data = (struct bfin_spi_master_data *)data; + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + struct bfin_spi_slave_data *chip = NULL; + unsigned int bits_per_word; + u16 cr, cr_width, dma_width, dma_config; + u32 tranf_success = 1; + u8 full_duplex = 0; + + /* Get current state information */ + message = drv_data->cur_msg; + transfer = drv_data->cur_transfer; + chip = drv_data->cur_chip; + + /* + * if msg is error or done, report it back using complete() callback + */ + + /* Handle for abort */ + if (message->state == ERROR_STATE) { + dev_dbg(&drv_data->pdev->dev, "transfer: we've hit an error\n"); + message->status = -EIO; + bfin_spi_giveback(drv_data); + return; + } + + /* Handle end of message */ + if (message->state == DONE_STATE) { + dev_dbg(&drv_data->pdev->dev, "transfer: all done!\n"); + message->status = 0; + bfin_spi_giveback(drv_data); + return; + } + + /* Delay if requested at end of transfer */ + if (message->state == RUNNING_STATE) { + dev_dbg(&drv_data->pdev->dev, "transfer: still running ...\n"); + previous = list_entry(transfer->transfer_list.prev, + struct spi_transfer, transfer_list); + if (previous->delay_usecs) + udelay(previous->delay_usecs); + } + + /* Flush any existing transfers that may be sitting in the hardware */ + if (bfin_spi_flush(drv_data) == 0) { + dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); + message->status = -EIO; + bfin_spi_giveback(drv_data); + return; + } + + if (transfer->len == 0) { + /* Move to next transfer of this msg */ + message->state = bfin_spi_next_transfer(drv_data); + /* Schedule next transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); + return; + } + + if (transfer->tx_buf != NULL) { + drv_data->tx = (void *)transfer->tx_buf; + drv_data->tx_end = drv_data->tx + transfer->len; + dev_dbg(&drv_data->pdev->dev, "tx_buf is %p, tx_end is %p\n", + transfer->tx_buf, drv_data->tx_end); + } else { + drv_data->tx = NULL; + } + + if (transfer->rx_buf != NULL) { + full_duplex = transfer->tx_buf != NULL; + drv_data->rx = transfer->rx_buf; + drv_data->rx_end = drv_data->rx + transfer->len; + dev_dbg(&drv_data->pdev->dev, "rx_buf is %p, rx_end is %p\n", + transfer->rx_buf, drv_data->rx_end); + } else { + drv_data->rx = NULL; + } + + drv_data->rx_dma = transfer->rx_dma; + drv_data->tx_dma = transfer->tx_dma; + drv_data->len_in_bytes = transfer->len; + drv_data->cs_change = transfer->cs_change; + + /* Bits per word setup */ + bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; + if ((bits_per_word > 0) && (bits_per_word % 16 == 0)) { + drv_data->n_bytes = bits_per_word/8; + drv_data->len = (transfer->len) >> 1; + cr_width = BIT_CTL_WORDSIZE; + drv_data->ops = &bfin_bfin_spi_transfer_ops_u16; + } else if ((bits_per_word > 0) && (bits_per_word % 8 == 0)) { + drv_data->n_bytes = bits_per_word/8; + drv_data->len = transfer->len; + cr_width = 0; + drv_data->ops = &bfin_bfin_spi_transfer_ops_u8; + } else { + dev_err(&drv_data->pdev->dev, "transfer: unsupported bits_per_word\n"); + message->status = -EINVAL; + bfin_spi_giveback(drv_data); + return; + } + cr = read_CTRL(drv_data) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE); + cr |= cr_width; + write_CTRL(drv_data, cr); + + dev_dbg(&drv_data->pdev->dev, + "transfer: drv_data->ops is %p, chip->ops is %p, u8_ops is %p\n", + drv_data->ops, chip->ops, &bfin_bfin_spi_transfer_ops_u8); + + message->state = RUNNING_STATE; + dma_config = 0; + + /* Speed setup (surely valid because already checked) */ + if (transfer->speed_hz) + write_BAUD(drv_data, hz_to_spi_baud(transfer->speed_hz)); + else + write_BAUD(drv_data, chip->baud); + + write_STAT(drv_data, BIT_STAT_CLR); + bfin_spi_cs_active(drv_data, chip); + + dev_dbg(&drv_data->pdev->dev, + "now pumping a transfer: width is %d, len is %d\n", + cr_width, transfer->len); + + /* + * Try to map dma buffer and do a dma transfer. If successful use, + * different way to r/w according to the enable_dma settings and if + * we are not doing a full duplex transfer (since the hardware does + * not support full duplex DMA transfers). + */ + if (!full_duplex && drv_data->cur_chip->enable_dma + && drv_data->len > 6) { + + unsigned long dma_start_addr, flags; + + disable_dma(drv_data->dma_channel); + clear_dma_irqstat(drv_data->dma_channel); + + /* config dma channel */ + dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n"); + set_dma_x_count(drv_data->dma_channel, drv_data->len); + if (cr_width == BIT_CTL_WORDSIZE) { + set_dma_x_modify(drv_data->dma_channel, 2); + dma_width = WDSIZE_16; + } else { + set_dma_x_modify(drv_data->dma_channel, 1); + dma_width = WDSIZE_8; + } + + /* poll for SPI completion before start */ + while (!(read_STAT(drv_data) & BIT_STAT_SPIF)) + cpu_relax(); + + /* dirty hack for autobuffer DMA mode */ + if (drv_data->tx_dma == 0xFFFF) { + dev_dbg(&drv_data->pdev->dev, + "doing autobuffer DMA out.\n"); + + /* no irq in autobuffer mode */ + dma_config = + (DMAFLOW_AUTO | RESTART | dma_width | DI_EN); + set_dma_config(drv_data->dma_channel, dma_config); + set_dma_start_addr(drv_data->dma_channel, + (unsigned long)drv_data->tx); + enable_dma(drv_data->dma_channel); + + /* start SPI transfer */ + write_CTRL(drv_data, cr | BIT_CTL_TIMOD_DMA_TX); + + /* just return here, there can only be one transfer + * in this mode + */ + message->status = 0; + bfin_spi_giveback(drv_data); + return; + } + + /* In dma mode, rx or tx must be NULL in one transfer */ + dma_config = (RESTART | dma_width | DI_EN); + if (drv_data->rx != NULL) { + /* set transfer mode, and enable SPI */ + dev_dbg(&drv_data->pdev->dev, "doing DMA in to %p (size %zx)\n", + drv_data->rx, drv_data->len_in_bytes); + + /* invalidate caches, if needed */ + if (bfin_addr_dcacheable((unsigned long) drv_data->rx)) + invalidate_dcache_range((unsigned long) drv_data->rx, + (unsigned long) (drv_data->rx + + drv_data->len_in_bytes)); + + dma_config |= WNR; + dma_start_addr = (unsigned long)drv_data->rx; + cr |= BIT_CTL_TIMOD_DMA_RX | BIT_CTL_SENDOPT; + + } else if (drv_data->tx != NULL) { + dev_dbg(&drv_data->pdev->dev, "doing DMA out.\n"); + + /* flush caches, if needed */ + if (bfin_addr_dcacheable((unsigned long) drv_data->tx)) + flush_dcache_range((unsigned long) drv_data->tx, + (unsigned long) (drv_data->tx + + drv_data->len_in_bytes)); + + dma_start_addr = (unsigned long)drv_data->tx; + cr |= BIT_CTL_TIMOD_DMA_TX; + + } else + BUG(); + + /* oh man, here there be monsters ... and i dont mean the + * fluffy cute ones from pixar, i mean the kind that'll eat + * your data, kick your dog, and love it all. do *not* try + * and change these lines unless you (1) heavily test DMA + * with SPI flashes on a loaded system (e.g. ping floods), + * (2) know just how broken the DMA engine interaction with + * the SPI peripheral is, and (3) have someone else to blame + * when you screw it all up anyways. + */ + set_dma_start_addr(drv_data->dma_channel, dma_start_addr); + set_dma_config(drv_data->dma_channel, dma_config); + local_irq_save(flags); + SSYNC(); + write_CTRL(drv_data, cr); + enable_dma(drv_data->dma_channel); + dma_enable_irq(drv_data->dma_channel); + local_irq_restore(flags); + + return; + } + + /* + * We always use SPI_WRITE mode (transfer starts with TDBR write). + * SPI_READ mode (transfer starts with RDBR read) seems to have + * problems with setting up the output value in TDBR prior to the + * start of the transfer. + */ + write_CTRL(drv_data, cr | BIT_CTL_TXMOD); + + if (chip->pio_interrupt) { + /* SPI irq should have been disabled by now */ + + /* discard old RX data and clear RXS */ + bfin_spi_dummy_read(drv_data); + + /* start transfer */ + if (drv_data->tx == NULL) + write_TDBR(drv_data, chip->idle_tx_val); + else { + int loop; + if (bits_per_word % 16 == 0) { + u16 *buf = (u16 *)drv_data->tx; + for (loop = 0; loop < bits_per_word / 16; + loop++) { + write_TDBR(drv_data, *buf++); + } + } else if (bits_per_word % 8 == 0) { + u8 *buf = (u8 *)drv_data->tx; + for (loop = 0; loop < bits_per_word / 8; loop++) + write_TDBR(drv_data, *buf++); + } + + drv_data->tx += drv_data->n_bytes; + } + + /* once TDBR is empty, interrupt is triggered */ + enable_irq(drv_data->spi_irq); + return; + } + + /* IO mode */ + dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n"); + + if (full_duplex) { + /* full duplex mode */ + BUG_ON((drv_data->tx_end - drv_data->tx) != + (drv_data->rx_end - drv_data->rx)); + dev_dbg(&drv_data->pdev->dev, + "IO duplex: cr is 0x%x\n", cr); + + drv_data->ops->duplex(drv_data); + + if (drv_data->tx != drv_data->tx_end) + tranf_success = 0; + } else if (drv_data->tx != NULL) { + /* write only half duplex */ + dev_dbg(&drv_data->pdev->dev, + "IO write: cr is 0x%x\n", cr); + + drv_data->ops->write(drv_data); + + if (drv_data->tx != drv_data->tx_end) + tranf_success = 0; + } else if (drv_data->rx != NULL) { + /* read only half duplex */ + dev_dbg(&drv_data->pdev->dev, + "IO read: cr is 0x%x\n", cr); + + drv_data->ops->read(drv_data); + if (drv_data->rx != drv_data->rx_end) + tranf_success = 0; + } + + if (!tranf_success) { + dev_dbg(&drv_data->pdev->dev, + "IO write error!\n"); + message->state = ERROR_STATE; + } else { + /* Update total byte transferred */ + message->actual_length += drv_data->len_in_bytes; + /* Move to next transfer of this msg */ + message->state = bfin_spi_next_transfer(drv_data); + if (drv_data->cs_change) + bfin_spi_cs_deactive(drv_data, chip); + } + + /* Schedule next transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); +} + +/* pop a msg from queue and kick off real transfer */ +static void bfin_spi_pump_messages(struct work_struct *work) +{ + struct bfin_spi_master_data *drv_data; + unsigned long flags; + + drv_data = container_of(work, struct bfin_spi_master_data, pump_messages); + + /* Lock queue and check for queue work */ + spin_lock_irqsave(&drv_data->lock, flags); + if (list_empty(&drv_data->queue) || !drv_data->running) { + /* pumper kicked off but no work to do */ + drv_data->busy = 0; + spin_unlock_irqrestore(&drv_data->lock, flags); + return; + } + + /* Make sure we are not already running a message */ + if (drv_data->cur_msg) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return; + } + + /* Extract head of queue */ + drv_data->cur_msg = list_entry(drv_data->queue.next, + struct spi_message, queue); + + /* Setup the SSP using the per chip configuration */ + drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); + bfin_spi_restore_state(drv_data); + + list_del_init(&drv_data->cur_msg->queue); + + /* Initial message state */ + drv_data->cur_msg->state = START_STATE; + drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, + struct spi_transfer, transfer_list); + + dev_dbg(&drv_data->pdev->dev, "got a message to pump, " + "state is set to: baud %d, flag 0x%x, ctl 0x%x\n", + drv_data->cur_chip->baud, drv_data->cur_chip->flag, + drv_data->cur_chip->ctl_reg); + + dev_dbg(&drv_data->pdev->dev, + "the first transfer len is %d\n", + drv_data->cur_transfer->len); + + /* Mark as busy and launch transfers */ + tasklet_schedule(&drv_data->pump_transfers); + + drv_data->busy = 1; + spin_unlock_irqrestore(&drv_data->lock, flags); +} + +/* + * got a msg to transfer, queue it in drv_data->queue. + * And kick off message pumper + */ +static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); + unsigned long flags; + + spin_lock_irqsave(&drv_data->lock, flags); + + if (!drv_data->running) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return -ESHUTDOWN; + } + + msg->actual_length = 0; + msg->status = -EINPROGRESS; + msg->state = START_STATE; + + dev_dbg(&spi->dev, "adding an msg in transfer() \n"); + list_add_tail(&msg->queue, &drv_data->queue); + + if (drv_data->running && !drv_data->busy) + queue_work(drv_data->workqueue, &drv_data->pump_messages); + + spin_unlock_irqrestore(&drv_data->lock, flags); + + return 0; +} + +#define MAX_SPI_SSEL 7 + +static u16 ssel[][MAX_SPI_SSEL] = { + {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3, + P_SPI0_SSEL4, P_SPI0_SSEL5, + P_SPI0_SSEL6, P_SPI0_SSEL7}, + + {P_SPI1_SSEL1, P_SPI1_SSEL2, P_SPI1_SSEL3, + P_SPI1_SSEL4, P_SPI1_SSEL5, + P_SPI1_SSEL6, P_SPI1_SSEL7}, + + {P_SPI2_SSEL1, P_SPI2_SSEL2, P_SPI2_SSEL3, + P_SPI2_SSEL4, P_SPI2_SSEL5, + P_SPI2_SSEL6, P_SPI2_SSEL7}, +}; + +/* setup for devices (may be called multiple times -- not just first setup) */ +static int bfin_spi_setup(struct spi_device *spi) +{ + struct bfin5xx_spi_chip *chip_info; + struct bfin_spi_slave_data *chip = NULL; + struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); + u16 bfin_ctl_reg; + int ret = -EINVAL; + + /* Only alloc (or use chip_info) on first setup */ + chip_info = NULL; + chip = spi_get_ctldata(spi); + if (chip == NULL) { + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) { + dev_err(&spi->dev, "cannot allocate chip data\n"); + ret = -ENOMEM; + goto error; + } + + chip->enable_dma = 0; + chip_info = spi->controller_data; + } + + /* Let people set non-standard bits directly */ + bfin_ctl_reg = BIT_CTL_OPENDRAIN | BIT_CTL_EMISO | + BIT_CTL_PSSE | BIT_CTL_GM | BIT_CTL_SZ; + + /* chip_info isn't always needed */ + if (chip_info) { + /* Make sure people stop trying to set fields via ctl_reg + * when they should actually be using common SPI framework. + * Currently we let through: WOM EMISO PSSE GM SZ. + * Not sure if a user actually needs/uses any of these, + * but let's assume (for now) they do. + */ + if (chip_info->ctl_reg & ~bfin_ctl_reg) { + dev_err(&spi->dev, "do not set bits in ctl_reg " + "that the SPI framework manages\n"); + goto error; + } + chip->enable_dma = chip_info->enable_dma != 0 + && drv_data->master_info->enable_dma; + chip->ctl_reg = chip_info->ctl_reg; + chip->cs_chg_udelay = chip_info->cs_chg_udelay; + chip->idle_tx_val = chip_info->idle_tx_val; + chip->pio_interrupt = chip_info->pio_interrupt; + spi->bits_per_word = chip_info->bits_per_word; + } else { + /* force a default base state */ + chip->ctl_reg &= bfin_ctl_reg; + } + + if (spi->bits_per_word % 8) { + dev_err(&spi->dev, "%d bits_per_word is not supported\n", + spi->bits_per_word); + goto error; + } + + /* translate common spi framework into our register */ + if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) { + dev_err(&spi->dev, "unsupported spi modes detected\n"); + goto error; + } + if (spi->mode & SPI_CPOL) + chip->ctl_reg |= BIT_CTL_CPOL; + if (spi->mode & SPI_CPHA) + chip->ctl_reg |= BIT_CTL_CPHA; + if (spi->mode & SPI_LSB_FIRST) + chip->ctl_reg |= BIT_CTL_LSBF; + /* we dont support running in slave mode (yet?) */ + chip->ctl_reg |= BIT_CTL_MASTER; + + /* + * Notice: for blackfin, the speed_hz is the value of register + * SPI_BAUD, not the real baudrate + */ + chip->baud = hz_to_spi_baud(spi->max_speed_hz); + chip->chip_select_num = spi->chip_select; + if (chip->chip_select_num < MAX_CTRL_CS) { + if (!(spi->mode & SPI_CPHA)) + dev_warn(&spi->dev, "Warning: SPI CPHA not set:" + " Slave Select not under software control!\n" + " See Documentation/blackfin/bfin-spi-notes.txt"); + + chip->flag = (1 << spi->chip_select) << 8; + } else + chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS; + + if (chip->enable_dma && chip->pio_interrupt) { + dev_err(&spi->dev, "enable_dma is set, " + "do not set pio_interrupt\n"); + goto error; + } + /* + * if any one SPI chip is registered and wants DMA, request the + * DMA channel for it + */ + if (chip->enable_dma && !drv_data->dma_requested) { + /* register dma irq handler */ + ret = request_dma(drv_data->dma_channel, "BFIN_SPI_DMA"); + if (ret) { + dev_err(&spi->dev, + "Unable to request BlackFin SPI DMA channel\n"); + goto error; + } + drv_data->dma_requested = 1; + + ret = set_dma_callback(drv_data->dma_channel, + bfin_spi_dma_irq_handler, drv_data); + if (ret) { + dev_err(&spi->dev, "Unable to set dma callback\n"); + goto error; + } + dma_disable_irq(drv_data->dma_channel); + } + + if (chip->pio_interrupt && !drv_data->irq_requested) { + ret = request_irq(drv_data->spi_irq, bfin_spi_pio_irq_handler, + IRQF_DISABLED, "BFIN_SPI", drv_data); + if (ret) { + dev_err(&spi->dev, "Unable to register spi IRQ\n"); + goto error; + } + drv_data->irq_requested = 1; + /* we use write mode, spi irq has to be disabled here */ + disable_irq(drv_data->spi_irq); + } + + if (chip->chip_select_num >= MAX_CTRL_CS) { + /* Only request on first setup */ + if (spi_get_ctldata(spi) == NULL) { + ret = gpio_request(chip->cs_gpio, spi->modalias); + if (ret) { + dev_err(&spi->dev, "gpio_request() error\n"); + goto pin_error; + } + gpio_direction_output(chip->cs_gpio, 1); + } + } + + dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n", + spi->modalias, spi->bits_per_word, chip->enable_dma); + dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n", + chip->ctl_reg, chip->flag); + + spi_set_ctldata(spi, chip); + + dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num); + if (chip->chip_select_num < MAX_CTRL_CS) { + ret = peripheral_request(ssel[spi->master->bus_num] + [chip->chip_select_num-1], spi->modalias); + if (ret) { + dev_err(&spi->dev, "peripheral_request() error\n"); + goto pin_error; + } + } + + bfin_spi_cs_enable(drv_data, chip); + bfin_spi_cs_deactive(drv_data, chip); + + return 0; + + pin_error: + if (chip->chip_select_num >= MAX_CTRL_CS) + gpio_free(chip->cs_gpio); + else + peripheral_free(ssel[spi->master->bus_num] + [chip->chip_select_num - 1]); + error: + if (chip) { + if (drv_data->dma_requested) + free_dma(drv_data->dma_channel); + drv_data->dma_requested = 0; + + kfree(chip); + /* prevent free 'chip' twice */ + spi_set_ctldata(spi, NULL); + } + + return ret; +} + +/* + * callback for spi framework. + * clean driver specific data + */ +static void bfin_spi_cleanup(struct spi_device *spi) +{ + struct bfin_spi_slave_data *chip = spi_get_ctldata(spi); + struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); + + if (!chip) + return; + + if (chip->chip_select_num < MAX_CTRL_CS) { + peripheral_free(ssel[spi->master->bus_num] + [chip->chip_select_num-1]); + bfin_spi_cs_disable(drv_data, chip); + } else + gpio_free(chip->cs_gpio); + + kfree(chip); + /* prevent free 'chip' twice */ + spi_set_ctldata(spi, NULL); +} + +static inline int bfin_spi_init_queue(struct bfin_spi_master_data *drv_data) +{ + INIT_LIST_HEAD(&drv_data->queue); + spin_lock_init(&drv_data->lock); + + drv_data->running = false; + drv_data->busy = 0; + + /* init transfer tasklet */ + tasklet_init(&drv_data->pump_transfers, + bfin_spi_pump_transfers, (unsigned long)drv_data); + + /* init messages workqueue */ + INIT_WORK(&drv_data->pump_messages, bfin_spi_pump_messages); + drv_data->workqueue = create_singlethread_workqueue( + dev_name(drv_data->master->dev.parent)); + if (drv_data->workqueue == NULL) + return -EBUSY; + + return 0; +} + +static inline int bfin_spi_start_queue(struct bfin_spi_master_data *drv_data) +{ + unsigned long flags; + + spin_lock_irqsave(&drv_data->lock, flags); + + if (drv_data->running || drv_data->busy) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return -EBUSY; + } + + drv_data->running = true; + drv_data->cur_msg = NULL; + drv_data->cur_transfer = NULL; + drv_data->cur_chip = NULL; + spin_unlock_irqrestore(&drv_data->lock, flags); + + queue_work(drv_data->workqueue, &drv_data->pump_messages); + + return 0; +} + +static inline int bfin_spi_stop_queue(struct bfin_spi_master_data *drv_data) +{ + unsigned long flags; + unsigned limit = 500; + int status = 0; + + spin_lock_irqsave(&drv_data->lock, flags); + + /* + * This is a bit lame, but is optimized for the common execution path. + * A wait_queue on the drv_data->busy could be used, but then the common + * execution path (pump_messages) would be required to call wake_up or + * friends on every SPI message. Do this instead + */ + drv_data->running = false; + while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) { + spin_unlock_irqrestore(&drv_data->lock, flags); + msleep(10); + spin_lock_irqsave(&drv_data->lock, flags); + } + + if (!list_empty(&drv_data->queue) || drv_data->busy) + status = -EBUSY; + + spin_unlock_irqrestore(&drv_data->lock, flags); + + return status; +} + +static inline int bfin_spi_destroy_queue(struct bfin_spi_master_data *drv_data) +{ + int status; + + status = bfin_spi_stop_queue(drv_data); + if (status != 0) + return status; + + destroy_workqueue(drv_data->workqueue); + + return 0; +} + +static int __init bfin_spi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bfin5xx_spi_master *platform_info; + struct spi_master *master; + struct bfin_spi_master_data *drv_data; + struct resource *res; + int status = 0; + + platform_info = dev->platform_data; + + /* Allocate master with space for drv_data */ + master = spi_alloc_master(dev, sizeof(*drv_data)); + if (!master) { + dev_err(&pdev->dev, "can not alloc spi_master\n"); + return -ENOMEM; + } + + drv_data = spi_master_get_devdata(master); + drv_data->master = master; + drv_data->master_info = platform_info; + drv_data->pdev = pdev; + drv_data->pin_req = platform_info->pin_req; + + /* the spi->mode bits supported by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; + + master->bus_num = pdev->id; + master->num_chipselect = platform_info->num_chipselect; + master->cleanup = bfin_spi_cleanup; + master->setup = bfin_spi_setup; + master->transfer = bfin_spi_transfer; + + /* Find and map our resources */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(dev, "Cannot get IORESOURCE_MEM\n"); + status = -ENOENT; + goto out_error_get_res; + } + + drv_data->regs_base = ioremap(res->start, resource_size(res)); + if (drv_data->regs_base == NULL) { + dev_err(dev, "Cannot map IO\n"); + status = -ENXIO; + goto out_error_ioremap; + } + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { + dev_err(dev, "No DMA channel specified\n"); + status = -ENOENT; + goto out_error_free_io; + } + drv_data->dma_channel = res->start; + + drv_data->spi_irq = platform_get_irq(pdev, 0); + if (drv_data->spi_irq < 0) { + dev_err(dev, "No spi pio irq specified\n"); + status = -ENOENT; + goto out_error_free_io; + } + + /* Initial and start queue */ + status = bfin_spi_init_queue(drv_data); + if (status != 0) { + dev_err(dev, "problem initializing queue\n"); + goto out_error_queue_alloc; + } + + status = bfin_spi_start_queue(drv_data); + if (status != 0) { + dev_err(dev, "problem starting queue\n"); + goto out_error_queue_alloc; + } + + status = peripheral_request_list(drv_data->pin_req, DRV_NAME); + if (status != 0) { + dev_err(&pdev->dev, ": Requesting Peripherals failed\n"); + goto out_error_queue_alloc; + } + + /* Reset SPI registers. If these registers were used by the boot loader, + * the sky may fall on your head if you enable the dma controller. + */ + write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); + write_FLAG(drv_data, 0xFF00); + + /* Register with the SPI framework */ + platform_set_drvdata(pdev, drv_data); + status = spi_register_master(master); + if (status != 0) { + dev_err(dev, "problem registering spi master\n"); + goto out_error_queue_alloc; + } + + dev_info(dev, "%s, Version %s, regs_base@%p, dma channel@%d\n", + DRV_DESC, DRV_VERSION, drv_data->regs_base, + drv_data->dma_channel); + return status; + +out_error_queue_alloc: + bfin_spi_destroy_queue(drv_data); +out_error_free_io: + iounmap((void *) drv_data->regs_base); +out_error_ioremap: +out_error_get_res: + spi_master_put(master); + + return status; +} + +/* stop hardware and remove the driver */ +static int __devexit bfin_spi_remove(struct platform_device *pdev) +{ + struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); + int status = 0; + + if (!drv_data) + return 0; + + /* Remove the queue */ + status = bfin_spi_destroy_queue(drv_data); + if (status != 0) + return status; + + /* Disable the SSP at the peripheral and SOC level */ + bfin_spi_disable(drv_data); + + /* Release DMA */ + if (drv_data->master_info->enable_dma) { + if (dma_channel_active(drv_data->dma_channel)) + free_dma(drv_data->dma_channel); + } + + if (drv_data->irq_requested) { + free_irq(drv_data->spi_irq, drv_data); + drv_data->irq_requested = 0; + } + + /* Disconnect from the SPI framework */ + spi_unregister_master(drv_data->master); + + peripheral_free_list(drv_data->pin_req); + + /* Prevent double remove */ + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); + int status = 0; + + status = bfin_spi_stop_queue(drv_data); + if (status != 0) + return status; + + drv_data->ctrl_reg = read_CTRL(drv_data); + drv_data->flag_reg = read_FLAG(drv_data); + + /* + * reset SPI_CTL and SPI_FLG registers + */ + write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); + write_FLAG(drv_data, 0xFF00); + + return 0; +} + +static int bfin_spi_resume(struct platform_device *pdev) +{ + struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); + int status = 0; + + write_CTRL(drv_data, drv_data->ctrl_reg); + write_FLAG(drv_data, drv_data->flag_reg); + + /* Start the queue running */ + status = bfin_spi_start_queue(drv_data); + if (status != 0) { + dev_err(&pdev->dev, "problem starting queue (%d)\n", status); + return status; + } + + return 0; +} +#else +#define bfin_spi_suspend NULL +#define bfin_spi_resume NULL +#endif /* CONFIG_PM */ + +MODULE_ALIAS("platform:bfin-spi"); +static struct platform_driver bfin_spi_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .suspend = bfin_spi_suspend, + .resume = bfin_spi_resume, + .remove = __devexit_p(bfin_spi_remove), +}; + +static int __init bfin_spi_init(void) +{ + return platform_driver_probe(&bfin_spi_driver, bfin_spi_probe); +} +subsys_initcall(bfin_spi_init); + +static void __exit bfin_spi_exit(void) +{ + platform_driver_unregister(&bfin_spi_driver); +} +module_exit(bfin_spi_exit); diff --git a/drivers/spi/spi-bitbang-txrx.h b/drivers/spi/spi-bitbang-txrx.h new file mode 100644 index 000000000000..c16bf853c3eb --- /dev/null +++ b/drivers/spi/spi-bitbang-txrx.h @@ -0,0 +1,97 @@ +/* + * Mix this utility code with some glue code to get one of several types of + * simple SPI master driver. Two do polled word-at-a-time I/O: + * + * - GPIO/parport bitbangers. Provide chipselect() and txrx_word[](), + * expanding the per-word routines from the inline templates below. + * + * - Drivers for controllers resembling bare shift registers. Provide + * chipselect() and txrx_word[](), with custom setup()/cleanup() methods + * that use your controller's clock and chipselect registers. + * + * Some hardware works well with requests at spi_transfer scope: + * + * - Drivers leveraging smarter hardware, with fifos or DMA; or for half + * duplex (MicroWire) controllers. Provide chipselect() and txrx_bufs(), + * and custom setup()/cleanup() methods. + */ + +/* + * The code that knows what GPIO pins do what should have declared four + * functions, ideally as inlines, before including this header: + * + * void setsck(struct spi_device *, int is_on); + * void setmosi(struct spi_device *, int is_on); + * int getmiso(struct spi_device *); + * void spidelay(unsigned); + * + * setsck()'s is_on parameter is a zero/nonzero boolean. + * + * setmosi()'s is_on parameter is a zero/nonzero boolean. + * + * getmiso() is required to return 0 or 1 only. Any other value is invalid + * and will result in improper operation. + * + * A non-inlined routine would call bitbang_txrx_*() routines. The + * main loop could easily compile down to a handful of instructions, + * especially if the delay is a NOP (to run at peak speed). + * + * Since this is software, the timings may not be exactly what your board's + * chips need ... there may be several reasons you'd need to tweak timings + * in these routines, not just make to make it faster or slower to match a + * particular CPU clock rate. + */ + +static inline u32 +bitbang_txrx_be_cpha0(struct spi_device *spi, + unsigned nsecs, unsigned cpol, unsigned flags, + u32 word, u8 bits) +{ + /* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */ + + /* clock starts at inactive polarity */ + for (word <<= (32 - bits); likely(bits); bits--) { + + /* setup MSB (to slave) on trailing edge */ + if ((flags & SPI_MASTER_NO_TX) == 0) + setmosi(spi, word & (1 << 31)); + spidelay(nsecs); /* T(setup) */ + + setsck(spi, !cpol); + spidelay(nsecs); + + /* sample MSB (from slave) on leading edge */ + word <<= 1; + if ((flags & SPI_MASTER_NO_RX) == 0) + word |= getmiso(spi); + setsck(spi, cpol); + } + return word; +} + +static inline u32 +bitbang_txrx_be_cpha1(struct spi_device *spi, + unsigned nsecs, unsigned cpol, unsigned flags, + u32 word, u8 bits) +{ + /* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */ + + /* clock starts at inactive polarity */ + for (word <<= (32 - bits); likely(bits); bits--) { + + /* setup MSB (to slave) on leading edge */ + setsck(spi, !cpol); + if ((flags & SPI_MASTER_NO_TX) == 0) + setmosi(spi, word & (1 << 31)); + spidelay(nsecs); /* T(setup) */ + + setsck(spi, cpol); + spidelay(nsecs); + + /* sample MSB (from slave) on trailing edge */ + word <<= 1; + if ((flags & SPI_MASTER_NO_RX) == 0) + word |= getmiso(spi); + } + return word; +} diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c new file mode 100644 index 000000000000..02d57fbba295 --- /dev/null +++ b/drivers/spi/spi-bitbang.c @@ -0,0 +1,505 @@ +/* + * polling/bitbanging SPI master controller driver utilities + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + + +/*----------------------------------------------------------------------*/ + +/* + * FIRST PART (OPTIONAL): word-at-a-time spi_transfer support. + * Use this for GPIO or shift-register level hardware APIs. + * + * spi_bitbang_cs is in spi_device->controller_state, which is unavailable + * to glue code. These bitbang setup() and cleanup() routines are always + * used, though maybe they're called from controller-aware code. + * + * chipselect() and friends may use use spi_device->controller_data and + * controller registers as appropriate. + * + * + * NOTE: SPI controller pins can often be used as GPIO pins instead, + * which means you could use a bitbang driver either to get hardware + * working quickly, or testing for differences that aren't speed related. + */ + +struct spi_bitbang_cs { + unsigned nsecs; /* (clock cycle time)/2 */ + u32 (*txrx_word)(struct spi_device *spi, unsigned nsecs, + u32 word, u8 bits); + unsigned (*txrx_bufs)(struct spi_device *, + u32 (*txrx_word)( + struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits), + unsigned, struct spi_transfer *); +}; + +static unsigned bitbang_txrx_8( + struct spi_device *spi, + u32 (*txrx_word)(struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits), + unsigned ns, + struct spi_transfer *t +) { + unsigned bits = t->bits_per_word ? : spi->bits_per_word; + unsigned count = t->len; + const u8 *tx = t->tx_buf; + u8 *rx = t->rx_buf; + + while (likely(count > 0)) { + u8 word = 0; + + if (tx) + word = *tx++; + word = txrx_word(spi, ns, word, bits); + if (rx) + *rx++ = word; + count -= 1; + } + return t->len - count; +} + +static unsigned bitbang_txrx_16( + struct spi_device *spi, + u32 (*txrx_word)(struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits), + unsigned ns, + struct spi_transfer *t +) { + unsigned bits = t->bits_per_word ? : spi->bits_per_word; + unsigned count = t->len; + const u16 *tx = t->tx_buf; + u16 *rx = t->rx_buf; + + while (likely(count > 1)) { + u16 word = 0; + + if (tx) + word = *tx++; + word = txrx_word(spi, ns, word, bits); + if (rx) + *rx++ = word; + count -= 2; + } + return t->len - count; +} + +static unsigned bitbang_txrx_32( + struct spi_device *spi, + u32 (*txrx_word)(struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits), + unsigned ns, + struct spi_transfer *t +) { + unsigned bits = t->bits_per_word ? : spi->bits_per_word; + unsigned count = t->len; + const u32 *tx = t->tx_buf; + u32 *rx = t->rx_buf; + + while (likely(count > 3)) { + u32 word = 0; + + if (tx) + word = *tx++; + word = txrx_word(spi, ns, word, bits); + if (rx) + *rx++ = word; + count -= 4; + } + return t->len - count; +} + +int spi_bitbang_setup_transfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct spi_bitbang_cs *cs = spi->controller_state; + u8 bits_per_word; + u32 hz; + + if (t) { + bits_per_word = t->bits_per_word; + hz = t->speed_hz; + } else { + bits_per_word = 0; + hz = 0; + } + + /* spi_transfer level calls that work per-word */ + if (!bits_per_word) + bits_per_word = spi->bits_per_word; + if (bits_per_word <= 8) + cs->txrx_bufs = bitbang_txrx_8; + else if (bits_per_word <= 16) + cs->txrx_bufs = bitbang_txrx_16; + else if (bits_per_word <= 32) + cs->txrx_bufs = bitbang_txrx_32; + else + return -EINVAL; + + /* nsecs = (clock period)/2 */ + if (!hz) + hz = spi->max_speed_hz; + if (hz) { + cs->nsecs = (1000000000/2) / hz; + if (cs->nsecs > (MAX_UDELAY_MS * 1000 * 1000)) + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(spi_bitbang_setup_transfer); + +/** + * spi_bitbang_setup - default setup for per-word I/O loops + */ +int spi_bitbang_setup(struct spi_device *spi) +{ + struct spi_bitbang_cs *cs = spi->controller_state; + struct spi_bitbang *bitbang; + int retval; + unsigned long flags; + + bitbang = spi_master_get_devdata(spi->master); + + if (!cs) { + cs = kzalloc(sizeof *cs, GFP_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + + /* per-word shift register access, in hardware or bitbanging */ + cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)]; + if (!cs->txrx_word) + return -EINVAL; + + retval = bitbang->setup_transfer(spi, NULL); + if (retval < 0) + return retval; + + dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs); + + /* NOTE we _need_ to call chipselect() early, ideally with adapter + * setup, unless the hardware defaults cooperate to avoid confusion + * between normal (active low) and inverted chipselects. + */ + + /* deselect chip (low or high) */ + spin_lock_irqsave(&bitbang->lock, flags); + if (!bitbang->busy) { + bitbang->chipselect(spi, BITBANG_CS_INACTIVE); + ndelay(cs->nsecs); + } + spin_unlock_irqrestore(&bitbang->lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(spi_bitbang_setup); + +/** + * spi_bitbang_cleanup - default cleanup for per-word I/O loops + */ +void spi_bitbang_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} +EXPORT_SYMBOL_GPL(spi_bitbang_cleanup); + +static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct spi_bitbang_cs *cs = spi->controller_state; + unsigned nsecs = cs->nsecs; + + return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t); +} + +/*----------------------------------------------------------------------*/ + +/* + * SECOND PART ... simple transfer queue runner. + * + * This costs a task context per controller, running the queue by + * performing each transfer in sequence. Smarter hardware can queue + * several DMA transfers at once, and process several controller queues + * in parallel; this driver doesn't match such hardware very well. + * + * Drivers can provide word-at-a-time i/o primitives, or provide + * transfer-at-a-time ones to leverage dma or fifo hardware. + */ +static void bitbang_work(struct work_struct *work) +{ + struct spi_bitbang *bitbang = + container_of(work, struct spi_bitbang, work); + unsigned long flags; + + spin_lock_irqsave(&bitbang->lock, flags); + bitbang->busy = 1; + while (!list_empty(&bitbang->queue)) { + struct spi_message *m; + struct spi_device *spi; + unsigned nsecs; + struct spi_transfer *t = NULL; + unsigned tmp; + unsigned cs_change; + int status; + int do_setup = -1; + + m = container_of(bitbang->queue.next, struct spi_message, + queue); + list_del_init(&m->queue); + spin_unlock_irqrestore(&bitbang->lock, flags); + + /* FIXME this is made-up ... the correct value is known to + * word-at-a-time bitbang code, and presumably chipselect() + * should enforce these requirements too? + */ + nsecs = 100; + + spi = m->spi; + tmp = 0; + cs_change = 1; + status = 0; + + list_for_each_entry (t, &m->transfers, transfer_list) { + + /* override speed or wordsize? */ + if (t->speed_hz || t->bits_per_word) + do_setup = 1; + + /* init (-1) or override (1) transfer params */ + if (do_setup != 0) { + status = bitbang->setup_transfer(spi, t); + if (status < 0) + break; + if (do_setup == -1) + do_setup = 0; + } + + /* set up default clock polarity, and activate chip; + * this implicitly updates clock and spi modes as + * previously recorded for this device via setup(). + * (and also deselects any other chip that might be + * selected ...) + */ + if (cs_change) { + bitbang->chipselect(spi, BITBANG_CS_ACTIVE); + ndelay(nsecs); + } + cs_change = t->cs_change; + if (!t->tx_buf && !t->rx_buf && t->len) { + status = -EINVAL; + break; + } + + /* transfer data. the lower level code handles any + * new dma mappings it needs. our caller always gave + * us dma-safe buffers. + */ + if (t->len) { + /* REVISIT dma API still needs a designated + * DMA_ADDR_INVALID; ~0 might be better. + */ + if (!m->is_dma_mapped) + t->rx_dma = t->tx_dma = 0; + status = bitbang->txrx_bufs(spi, t); + } + if (status > 0) + m->actual_length += status; + if (status != t->len) { + /* always report some kind of error */ + if (status >= 0) + status = -EREMOTEIO; + break; + } + status = 0; + + /* protocol tweaks before next transfer */ + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (!cs_change) + continue; + if (t->transfer_list.next == &m->transfers) + break; + + /* sometimes a short mid-message deselect of the chip + * may be needed to terminate a mode or command + */ + ndelay(nsecs); + bitbang->chipselect(spi, BITBANG_CS_INACTIVE); + ndelay(nsecs); + } + + m->status = status; + m->complete(m->context); + + /* normally deactivate chipselect ... unless no error and + * cs_change has hinted that the next message will probably + * be for this chip too. + */ + if (!(status == 0 && cs_change)) { + ndelay(nsecs); + bitbang->chipselect(spi, BITBANG_CS_INACTIVE); + ndelay(nsecs); + } + + spin_lock_irqsave(&bitbang->lock, flags); + } + bitbang->busy = 0; + spin_unlock_irqrestore(&bitbang->lock, flags); +} + +/** + * spi_bitbang_transfer - default submit to transfer queue + */ +int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct spi_bitbang *bitbang; + unsigned long flags; + int status = 0; + + m->actual_length = 0; + m->status = -EINPROGRESS; + + bitbang = spi_master_get_devdata(spi->master); + + spin_lock_irqsave(&bitbang->lock, flags); + if (!spi->max_speed_hz) + status = -ENETDOWN; + else { + list_add_tail(&m->queue, &bitbang->queue); + queue_work(bitbang->workqueue, &bitbang->work); + } + spin_unlock_irqrestore(&bitbang->lock, flags); + + return status; +} +EXPORT_SYMBOL_GPL(spi_bitbang_transfer); + +/*----------------------------------------------------------------------*/ + +/** + * spi_bitbang_start - start up a polled/bitbanging SPI master driver + * @bitbang: driver handle + * + * Caller should have zero-initialized all parts of the structure, and then + * provided callbacks for chip selection and I/O loops. If the master has + * a transfer method, its final step should call spi_bitbang_transfer; or, + * that's the default if the transfer routine is not initialized. It should + * also set up the bus number and number of chipselects. + * + * For i/o loops, provide callbacks either per-word (for bitbanging, or for + * hardware that basically exposes a shift register) or per-spi_transfer + * (which takes better advantage of hardware like fifos or DMA engines). + * + * Drivers using per-word I/O loops should use (or call) spi_bitbang_setup, + * spi_bitbang_cleanup and spi_bitbang_setup_transfer to handle those spi + * master methods. Those methods are the defaults if the bitbang->txrx_bufs + * routine isn't initialized. + * + * This routine registers the spi_master, which will process requests in a + * dedicated task, keeping IRQs unblocked most of the time. To stop + * processing those requests, call spi_bitbang_stop(). + */ +int spi_bitbang_start(struct spi_bitbang *bitbang) +{ + int status; + + if (!bitbang->master || !bitbang->chipselect) + return -EINVAL; + + INIT_WORK(&bitbang->work, bitbang_work); + spin_lock_init(&bitbang->lock); + INIT_LIST_HEAD(&bitbang->queue); + + if (!bitbang->master->mode_bits) + bitbang->master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags; + + if (!bitbang->master->transfer) + bitbang->master->transfer = spi_bitbang_transfer; + if (!bitbang->txrx_bufs) { + bitbang->use_dma = 0; + bitbang->txrx_bufs = spi_bitbang_bufs; + if (!bitbang->master->setup) { + if (!bitbang->setup_transfer) + bitbang->setup_transfer = + spi_bitbang_setup_transfer; + bitbang->master->setup = spi_bitbang_setup; + bitbang->master->cleanup = spi_bitbang_cleanup; + } + } else if (!bitbang->master->setup) + return -EINVAL; + if (bitbang->master->transfer == spi_bitbang_transfer && + !bitbang->setup_transfer) + return -EINVAL; + + /* this task is the only thing to touch the SPI bits */ + bitbang->busy = 0; + bitbang->workqueue = create_singlethread_workqueue( + dev_name(bitbang->master->dev.parent)); + if (bitbang->workqueue == NULL) { + status = -EBUSY; + goto err1; + } + + /* driver may get busy before register() returns, especially + * if someone registered boardinfo for devices + */ + status = spi_register_master(bitbang->master); + if (status < 0) + goto err2; + + return status; + +err2: + destroy_workqueue(bitbang->workqueue); +err1: + return status; +} +EXPORT_SYMBOL_GPL(spi_bitbang_start); + +/** + * spi_bitbang_stop - stops the task providing spi communication + */ +int spi_bitbang_stop(struct spi_bitbang *bitbang) +{ + spi_unregister_master(bitbang->master); + + WARN_ON(!list_empty(&bitbang->queue)); + + destroy_workqueue(bitbang->workqueue); + + return 0; +} +EXPORT_SYMBOL_GPL(spi_bitbang_stop); + +MODULE_LICENSE("GPL"); + diff --git a/drivers/spi/spi-butterfly.c b/drivers/spi/spi-butterfly.c new file mode 100644 index 000000000000..9f907ec52def --- /dev/null +++ b/drivers/spi/spi-butterfly.c @@ -0,0 +1,356 @@ +/* + * parport-to-butterfly adapter + * + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + + +/* + * This uses SPI to talk with an "AVR Butterfly", which is a $US20 card + * with a battery powered AVR microcontroller and lots of goodies. You + * can use GCC to develop firmware for this. + * + * See Documentation/spi/butterfly for information about how to build + * and use this custom parallel port cable. + */ + + +/* DATA output bits (pins 2..9 == D0..D7) */ +#define butterfly_nreset (1 << 1) /* pin 3 */ + +#define spi_sck_bit (1 << 0) /* pin 2 */ +#define spi_mosi_bit (1 << 7) /* pin 9 */ + +#define vcc_bits ((1 << 6) | (1 << 5)) /* pins 7, 8 */ + +/* STATUS input bits */ +#define spi_miso_bit PARPORT_STATUS_BUSY /* pin 11 */ + +/* CONTROL output bits */ +#define spi_cs_bit PARPORT_CONTROL_SELECT /* pin 17 */ + + + +static inline struct butterfly *spidev_to_pp(struct spi_device *spi) +{ + return spi->controller_data; +} + + +struct butterfly { + /* REVISIT ... for now, this must be first */ + struct spi_bitbang bitbang; + + struct parport *port; + struct pardevice *pd; + + u8 lastbyte; + + struct spi_device *dataflash; + struct spi_device *butterfly; + struct spi_board_info info[2]; + +}; + +/*----------------------------------------------------------------------*/ + +static inline void +setsck(struct spi_device *spi, int is_on) +{ + struct butterfly *pp = spidev_to_pp(spi); + u8 bit, byte = pp->lastbyte; + + bit = spi_sck_bit; + + if (is_on) + byte |= bit; + else + byte &= ~bit; + parport_write_data(pp->port, byte); + pp->lastbyte = byte; +} + +static inline void +setmosi(struct spi_device *spi, int is_on) +{ + struct butterfly *pp = spidev_to_pp(spi); + u8 bit, byte = pp->lastbyte; + + bit = spi_mosi_bit; + + if (is_on) + byte |= bit; + else + byte &= ~bit; + parport_write_data(pp->port, byte); + pp->lastbyte = byte; +} + +static inline int getmiso(struct spi_device *spi) +{ + struct butterfly *pp = spidev_to_pp(spi); + int value; + u8 bit; + + bit = spi_miso_bit; + + /* only STATUS_BUSY is NOT negated */ + value = !(parport_read_status(pp->port) & bit); + return (bit == PARPORT_STATUS_BUSY) ? value : !value; +} + +static void butterfly_chipselect(struct spi_device *spi, int value) +{ + struct butterfly *pp = spidev_to_pp(spi); + + /* set default clock polarity */ + if (value != BITBANG_CS_INACTIVE) + setsck(spi, spi->mode & SPI_CPOL); + + /* here, value == "activate or not"; + * most PARPORT_CONTROL_* bits are negated, so we must + * morph it to value == "bit value to write in control register" + */ + if (spi_cs_bit == PARPORT_CONTROL_INIT) + value = !value; + + parport_frob_control(pp->port, spi_cs_bit, value ? spi_cs_bit : 0); +} + + +/* we only needed to implement one mode here, and choose SPI_MODE_0 */ + +#define spidelay(X) do{}while(0) +//#define spidelay ndelay + +#include "spi-bitbang-txrx.h" + +static u32 +butterfly_txrx_word_mode0(struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); +} + +/*----------------------------------------------------------------------*/ + +/* override default partitioning with cmdlinepart */ +static struct mtd_partition partitions[] = { { + /* JFFS2 wants partitions of 4*N blocks for this device, + * so sectors 0 and 1 can't be partitions by themselves. + */ + + /* sector 0 = 8 pages * 264 bytes/page (1 block) + * sector 1 = 248 pages * 264 bytes/page + */ + .name = "bookkeeping", // 66 KB + .offset = 0, + .size = (8 + 248) * 264, +// .mask_flags = MTD_WRITEABLE, +}, { + /* sector 2 = 256 pages * 264 bytes/page + * sectors 3-5 = 512 pages * 264 bytes/page + */ + .name = "filesystem", // 462 KB + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, +} }; + +static struct flash_platform_data flash = { + .name = "butterflash", + .parts = partitions, + .nr_parts = ARRAY_SIZE(partitions), +}; + + +/* REVISIT remove this ugly global and its "only one" limitation */ +static struct butterfly *butterfly; + +static void butterfly_attach(struct parport *p) +{ + struct pardevice *pd; + int status; + struct butterfly *pp; + struct spi_master *master; + struct device *dev = p->physport->dev; + + if (butterfly || !dev) + return; + + /* REVISIT: this just _assumes_ a butterfly is there ... no probe, + * and no way to be selective about what it binds to. + */ + + master = spi_alloc_master(dev, sizeof *pp); + if (!master) { + status = -ENOMEM; + goto done; + } + pp = spi_master_get_devdata(master); + + /* + * SPI and bitbang hookup + * + * use default setup(), cleanup(), and transfer() methods; and + * only bother implementing mode 0. Start it later. + */ + master->bus_num = 42; + master->num_chipselect = 2; + + pp->bitbang.master = spi_master_get(master); + pp->bitbang.chipselect = butterfly_chipselect; + pp->bitbang.txrx_word[SPI_MODE_0] = butterfly_txrx_word_mode0; + + /* + * parport hookup + */ + pp->port = p; + pd = parport_register_device(p, "spi_butterfly", + NULL, NULL, NULL, + 0 /* FLAGS */, pp); + if (!pd) { + status = -ENOMEM; + goto clean0; + } + pp->pd = pd; + + status = parport_claim(pd); + if (status < 0) + goto clean1; + + /* + * Butterfly reset, powerup, run firmware + */ + pr_debug("%s: powerup/reset Butterfly\n", p->name); + + /* nCS for dataflash (this bit is inverted on output) */ + parport_frob_control(pp->port, spi_cs_bit, 0); + + /* stabilize power with chip in reset (nRESET), and + * spi_sck_bit clear (CPOL=0) + */ + pp->lastbyte |= vcc_bits; + parport_write_data(pp->port, pp->lastbyte); + msleep(5); + + /* take it out of reset; assume long reset delay */ + pp->lastbyte |= butterfly_nreset; + parport_write_data(pp->port, pp->lastbyte); + msleep(100); + + + /* + * Start SPI ... for now, hide that we're two physical busses. + */ + status = spi_bitbang_start(&pp->bitbang); + if (status < 0) + goto clean2; + + /* Bus 1 lets us talk to at45db041b (firmware disables AVR SPI), AVR + * (firmware resets at45, acts as spi slave) or neither (we ignore + * both, AVR uses AT45). Here we expect firmware for the first option. + */ + + pp->info[0].max_speed_hz = 15 * 1000 * 1000; + strcpy(pp->info[0].modalias, "mtd_dataflash"); + pp->info[0].platform_data = &flash; + pp->info[0].chip_select = 1; + pp->info[0].controller_data = pp; + pp->dataflash = spi_new_device(pp->bitbang.master, &pp->info[0]); + if (pp->dataflash) + pr_debug("%s: dataflash at %s\n", p->name, + dev_name(&pp->dataflash->dev)); + + // dev_info(_what?_, ...) + pr_info("%s: AVR Butterfly\n", p->name); + butterfly = pp; + return; + +clean2: + /* turn off VCC */ + parport_write_data(pp->port, 0); + + parport_release(pp->pd); +clean1: + parport_unregister_device(pd); +clean0: + (void) spi_master_put(pp->bitbang.master); +done: + pr_debug("%s: butterfly probe, fail %d\n", p->name, status); +} + +static void butterfly_detach(struct parport *p) +{ + struct butterfly *pp; + int status; + + /* FIXME this global is ugly ... but, how to quickly get from + * the parport to the "struct butterfly" associated with it? + * "old school" driver-internal device lists? + */ + if (!butterfly || butterfly->port != p) + return; + pp = butterfly; + butterfly = NULL; + + /* stop() unregisters child devices too */ + status = spi_bitbang_stop(&pp->bitbang); + + /* turn off VCC */ + parport_write_data(pp->port, 0); + msleep(10); + + parport_release(pp->pd); + parport_unregister_device(pp->pd); + + (void) spi_master_put(pp->bitbang.master); +} + +static struct parport_driver butterfly_driver = { + .name = "spi_butterfly", + .attach = butterfly_attach, + .detach = butterfly_detach, +}; + + +static int __init butterfly_init(void) +{ + return parport_register_driver(&butterfly_driver); +} +device_initcall(butterfly_init); + +static void __exit butterfly_exit(void) +{ + parport_unregister_driver(&butterfly_driver); +} +module_exit(butterfly_exit); + +MODULE_DESCRIPTION("Parport Adapter driver for AVR Butterfly"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c new file mode 100644 index 000000000000..ae2cd1c1fda8 --- /dev/null +++ b/drivers/spi/spi-coldfire-qspi.c @@ -0,0 +1,642 @@ +/* + * Freescale/Motorola Coldfire Queued SPI driver + * + * Copyright 2010 Steven King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA + * +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define DRIVER_NAME "mcfqspi" + +#define MCFQSPI_BUSCLK (MCF_BUSCLK / 2) + +#define MCFQSPI_QMR 0x00 +#define MCFQSPI_QMR_MSTR 0x8000 +#define MCFQSPI_QMR_CPOL 0x0200 +#define MCFQSPI_QMR_CPHA 0x0100 +#define MCFQSPI_QDLYR 0x04 +#define MCFQSPI_QDLYR_SPE 0x8000 +#define MCFQSPI_QWR 0x08 +#define MCFQSPI_QWR_HALT 0x8000 +#define MCFQSPI_QWR_WREN 0x4000 +#define MCFQSPI_QWR_CSIV 0x1000 +#define MCFQSPI_QIR 0x0C +#define MCFQSPI_QIR_WCEFB 0x8000 +#define MCFQSPI_QIR_ABRTB 0x4000 +#define MCFQSPI_QIR_ABRTL 0x1000 +#define MCFQSPI_QIR_WCEFE 0x0800 +#define MCFQSPI_QIR_ABRTE 0x0400 +#define MCFQSPI_QIR_SPIFE 0x0100 +#define MCFQSPI_QIR_WCEF 0x0008 +#define MCFQSPI_QIR_ABRT 0x0004 +#define MCFQSPI_QIR_SPIF 0x0001 +#define MCFQSPI_QAR 0x010 +#define MCFQSPI_QAR_TXBUF 0x00 +#define MCFQSPI_QAR_RXBUF 0x10 +#define MCFQSPI_QAR_CMDBUF 0x20 +#define MCFQSPI_QDR 0x014 +#define MCFQSPI_QCR 0x014 +#define MCFQSPI_QCR_CONT 0x8000 +#define MCFQSPI_QCR_BITSE 0x4000 +#define MCFQSPI_QCR_DT 0x2000 + +struct mcfqspi { + void __iomem *iobase; + int irq; + struct clk *clk; + struct mcfqspi_cs_control *cs_control; + + wait_queue_head_t waitq; + + struct work_struct work; + struct workqueue_struct *workq; + spinlock_t lock; + struct list_head msgq; +}; + +static void mcfqspi_wr_qmr(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QMR); +} + +static void mcfqspi_wr_qdlyr(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QDLYR); +} + +static u16 mcfqspi_rd_qdlyr(struct mcfqspi *mcfqspi) +{ + return readw(mcfqspi->iobase + MCFQSPI_QDLYR); +} + +static void mcfqspi_wr_qwr(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QWR); +} + +static void mcfqspi_wr_qir(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QIR); +} + +static void mcfqspi_wr_qar(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QAR); +} + +static void mcfqspi_wr_qdr(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QDR); +} + +static u16 mcfqspi_rd_qdr(struct mcfqspi *mcfqspi) +{ + return readw(mcfqspi->iobase + MCFQSPI_QDR); +} + +static void mcfqspi_cs_select(struct mcfqspi *mcfqspi, u8 chip_select, + bool cs_high) +{ + mcfqspi->cs_control->select(mcfqspi->cs_control, chip_select, cs_high); +} + +static void mcfqspi_cs_deselect(struct mcfqspi *mcfqspi, u8 chip_select, + bool cs_high) +{ + mcfqspi->cs_control->deselect(mcfqspi->cs_control, chip_select, cs_high); +} + +static int mcfqspi_cs_setup(struct mcfqspi *mcfqspi) +{ + return (mcfqspi->cs_control && mcfqspi->cs_control->setup) ? + mcfqspi->cs_control->setup(mcfqspi->cs_control) : 0; +} + +static void mcfqspi_cs_teardown(struct mcfqspi *mcfqspi) +{ + if (mcfqspi->cs_control && mcfqspi->cs_control->teardown) + mcfqspi->cs_control->teardown(mcfqspi->cs_control); +} + +static u8 mcfqspi_qmr_baud(u32 speed_hz) +{ + return clamp((MCFQSPI_BUSCLK + speed_hz - 1) / speed_hz, 2u, 255u); +} + +static bool mcfqspi_qdlyr_spe(struct mcfqspi *mcfqspi) +{ + return mcfqspi_rd_qdlyr(mcfqspi) & MCFQSPI_QDLYR_SPE; +} + +static irqreturn_t mcfqspi_irq_handler(int this_irq, void *dev_id) +{ + struct mcfqspi *mcfqspi = dev_id; + + /* clear interrupt */ + mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE | MCFQSPI_QIR_SPIF); + wake_up(&mcfqspi->waitq); + + return IRQ_HANDLED; +} + +static void mcfqspi_transfer_msg8(struct mcfqspi *mcfqspi, unsigned count, + const u8 *txbuf, u8 *rxbuf) +{ + unsigned i, n, offset = 0; + + n = min(count, 16u); + + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_CMDBUF); + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, MCFQSPI_QCR_BITSE); + + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_TXBUF); + if (txbuf) + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, *txbuf++); + else + for (i = 0; i < count; ++i) + mcfqspi_wr_qdr(mcfqspi, 0); + + count -= n; + if (count) { + u16 qwr = 0xf08; + mcfqspi_wr_qwr(mcfqspi, 0x700); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + + do { + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + mcfqspi_wr_qwr(mcfqspi, qwr); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, + MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < 8; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + } + n = min(count, 8u); + if (txbuf) { + mcfqspi_wr_qar(mcfqspi, + MCFQSPI_QAR_TXBUF + offset); + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, *txbuf++); + } + qwr = (offset ? 0x808 : 0) + ((n - 1) << 8); + offset ^= 8; + count -= n; + } while (count); + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + mcfqspi_wr_qwr(mcfqspi, qwr); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < 8; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + offset ^= 8; + } + } else { + mcfqspi_wr_qwr(mcfqspi, (n - 1) << 8); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + } + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < n; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + } +} + +static void mcfqspi_transfer_msg16(struct mcfqspi *mcfqspi, unsigned count, + const u16 *txbuf, u16 *rxbuf) +{ + unsigned i, n, offset = 0; + + n = min(count, 16u); + + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_CMDBUF); + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, MCFQSPI_QCR_BITSE); + + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_TXBUF); + if (txbuf) + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, *txbuf++); + else + for (i = 0; i < count; ++i) + mcfqspi_wr_qdr(mcfqspi, 0); + + count -= n; + if (count) { + u16 qwr = 0xf08; + mcfqspi_wr_qwr(mcfqspi, 0x700); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + + do { + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + mcfqspi_wr_qwr(mcfqspi, qwr); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, + MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < 8; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + } + n = min(count, 8u); + if (txbuf) { + mcfqspi_wr_qar(mcfqspi, + MCFQSPI_QAR_TXBUF + offset); + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, *txbuf++); + } + qwr = (offset ? 0x808 : 0x000) + ((n - 1) << 8); + offset ^= 8; + count -= n; + } while (count); + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + mcfqspi_wr_qwr(mcfqspi, qwr); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < 8; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + offset ^= 8; + } + } else { + mcfqspi_wr_qwr(mcfqspi, (n - 1) << 8); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + } + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < n; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + } +} + +static void mcfqspi_work(struct work_struct *work) +{ + struct mcfqspi *mcfqspi = container_of(work, struct mcfqspi, work); + unsigned long flags; + + spin_lock_irqsave(&mcfqspi->lock, flags); + while (!list_empty(&mcfqspi->msgq)) { + struct spi_message *msg; + struct spi_device *spi; + struct spi_transfer *xfer; + int status = 0; + + msg = container_of(mcfqspi->msgq.next, struct spi_message, + queue); + + list_del_init(&msg->queue); + spin_unlock_irqrestore(&mcfqspi->lock, flags); + + spi = msg->spi; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + bool cs_high = spi->mode & SPI_CS_HIGH; + u16 qmr = MCFQSPI_QMR_MSTR; + + if (xfer->bits_per_word) + qmr |= xfer->bits_per_word << 10; + else + qmr |= spi->bits_per_word << 10; + if (spi->mode & SPI_CPHA) + qmr |= MCFQSPI_QMR_CPHA; + if (spi->mode & SPI_CPOL) + qmr |= MCFQSPI_QMR_CPOL; + if (xfer->speed_hz) + qmr |= mcfqspi_qmr_baud(xfer->speed_hz); + else + qmr |= mcfqspi_qmr_baud(spi->max_speed_hz); + mcfqspi_wr_qmr(mcfqspi, qmr); + + mcfqspi_cs_select(mcfqspi, spi->chip_select, cs_high); + + mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE); + if ((xfer->bits_per_word ? xfer->bits_per_word : + spi->bits_per_word) == 8) + mcfqspi_transfer_msg8(mcfqspi, xfer->len, + xfer->tx_buf, + xfer->rx_buf); + else + mcfqspi_transfer_msg16(mcfqspi, xfer->len / 2, + xfer->tx_buf, + xfer->rx_buf); + mcfqspi_wr_qir(mcfqspi, 0); + + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + if (xfer->cs_change) { + if (!list_is_last(&xfer->transfer_list, + &msg->transfers)) + mcfqspi_cs_deselect(mcfqspi, + spi->chip_select, + cs_high); + } else { + if (list_is_last(&xfer->transfer_list, + &msg->transfers)) + mcfqspi_cs_deselect(mcfqspi, + spi->chip_select, + cs_high); + } + msg->actual_length += xfer->len; + } + msg->status = status; + msg->complete(msg->context); + + spin_lock_irqsave(&mcfqspi->lock, flags); + } + spin_unlock_irqrestore(&mcfqspi->lock, flags); +} + +static int mcfqspi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct mcfqspi *mcfqspi; + struct spi_transfer *xfer; + unsigned long flags; + + mcfqspi = spi_master_get_devdata(spi->master); + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (xfer->bits_per_word && ((xfer->bits_per_word < 8) + || (xfer->bits_per_word > 16))) { + dev_dbg(&spi->dev, + "%d bits per word is not supported\n", + xfer->bits_per_word); + goto fail; + } + if (xfer->speed_hz) { + u32 real_speed = MCFQSPI_BUSCLK / + mcfqspi_qmr_baud(xfer->speed_hz); + if (real_speed != xfer->speed_hz) + dev_dbg(&spi->dev, + "using speed %d instead of %d\n", + real_speed, xfer->speed_hz); + } + } + msg->status = -EINPROGRESS; + msg->actual_length = 0; + + spin_lock_irqsave(&mcfqspi->lock, flags); + list_add_tail(&msg->queue, &mcfqspi->msgq); + queue_work(mcfqspi->workq, &mcfqspi->work); + spin_unlock_irqrestore(&mcfqspi->lock, flags); + + return 0; +fail: + msg->status = -EINVAL; + return -EINVAL; +} + +static int mcfqspi_setup(struct spi_device *spi) +{ + if ((spi->bits_per_word < 8) || (spi->bits_per_word > 16)) { + dev_dbg(&spi->dev, "%d bits per word is not supported\n", + spi->bits_per_word); + return -EINVAL; + } + if (spi->chip_select >= spi->master->num_chipselect) { + dev_dbg(&spi->dev, "%d chip select is out of range\n", + spi->chip_select); + return -EINVAL; + } + + mcfqspi_cs_deselect(spi_master_get_devdata(spi->master), + spi->chip_select, spi->mode & SPI_CS_HIGH); + + dev_dbg(&spi->dev, + "bits per word %d, chip select %d, speed %d KHz\n", + spi->bits_per_word, spi->chip_select, + (MCFQSPI_BUSCLK / mcfqspi_qmr_baud(spi->max_speed_hz)) + / 1000); + + return 0; +} + +static int __devinit mcfqspi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct mcfqspi *mcfqspi; + struct resource *res; + struct mcfqspi_platform_data *pdata; + int status; + + master = spi_alloc_master(&pdev->dev, sizeof(*mcfqspi)); + if (master == NULL) { + dev_dbg(&pdev->dev, "spi_alloc_master failed\n"); + return -ENOMEM; + } + + mcfqspi = spi_master_get_devdata(master); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_dbg(&pdev->dev, "platform_get_resource failed\n"); + status = -ENXIO; + goto fail0; + } + + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { + dev_dbg(&pdev->dev, "request_mem_region failed\n"); + status = -EBUSY; + goto fail0; + } + + mcfqspi->iobase = ioremap(res->start, resource_size(res)); + if (!mcfqspi->iobase) { + dev_dbg(&pdev->dev, "ioremap failed\n"); + status = -ENOMEM; + goto fail1; + } + + mcfqspi->irq = platform_get_irq(pdev, 0); + if (mcfqspi->irq < 0) { + dev_dbg(&pdev->dev, "platform_get_irq failed\n"); + status = -ENXIO; + goto fail2; + } + + status = request_irq(mcfqspi->irq, mcfqspi_irq_handler, IRQF_DISABLED, + pdev->name, mcfqspi); + if (status) { + dev_dbg(&pdev->dev, "request_irq failed\n"); + goto fail2; + } + + mcfqspi->clk = clk_get(&pdev->dev, "qspi_clk"); + if (IS_ERR(mcfqspi->clk)) { + dev_dbg(&pdev->dev, "clk_get failed\n"); + status = PTR_ERR(mcfqspi->clk); + goto fail3; + } + clk_enable(mcfqspi->clk); + + mcfqspi->workq = create_singlethread_workqueue(dev_name(master->dev.parent)); + if (!mcfqspi->workq) { + dev_dbg(&pdev->dev, "create_workqueue failed\n"); + status = -ENOMEM; + goto fail4; + } + INIT_WORK(&mcfqspi->work, mcfqspi_work); + spin_lock_init(&mcfqspi->lock); + INIT_LIST_HEAD(&mcfqspi->msgq); + init_waitqueue_head(&mcfqspi->waitq); + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_dbg(&pdev->dev, "platform data is missing\n"); + goto fail5; + } + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->num_chipselect; + + mcfqspi->cs_control = pdata->cs_control; + status = mcfqspi_cs_setup(mcfqspi); + if (status) { + dev_dbg(&pdev->dev, "error initializing cs_control\n"); + goto fail5; + } + + master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA; + master->setup = mcfqspi_setup; + master->transfer = mcfqspi_transfer; + + platform_set_drvdata(pdev, master); + + status = spi_register_master(master); + if (status) { + dev_dbg(&pdev->dev, "spi_register_master failed\n"); + goto fail6; + } + dev_info(&pdev->dev, "Coldfire QSPI bus driver\n"); + + return 0; + +fail6: + mcfqspi_cs_teardown(mcfqspi); +fail5: + destroy_workqueue(mcfqspi->workq); +fail4: + clk_disable(mcfqspi->clk); + clk_put(mcfqspi->clk); +fail3: + free_irq(mcfqspi->irq, mcfqspi); +fail2: + iounmap(mcfqspi->iobase); +fail1: + release_mem_region(res->start, resource_size(res)); +fail0: + spi_master_put(master); + + dev_dbg(&pdev->dev, "Coldfire QSPI probe failed\n"); + + return status; +} + +static int __devexit mcfqspi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct mcfqspi *mcfqspi = spi_master_get_devdata(master); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + /* disable the hardware (set the baud rate to 0) */ + mcfqspi_wr_qmr(mcfqspi, MCFQSPI_QMR_MSTR); + + platform_set_drvdata(pdev, NULL); + mcfqspi_cs_teardown(mcfqspi); + destroy_workqueue(mcfqspi->workq); + clk_disable(mcfqspi->clk); + clk_put(mcfqspi->clk); + free_irq(mcfqspi->irq, mcfqspi); + iounmap(mcfqspi->iobase); + release_mem_region(res->start, resource_size(res)); + spi_unregister_master(master); + spi_master_put(master); + + return 0; +} + +#ifdef CONFIG_PM + +static int mcfqspi_suspend(struct device *dev) +{ + struct mcfqspi *mcfqspi = platform_get_drvdata(to_platform_device(dev)); + + clk_disable(mcfqspi->clk); + + return 0; +} + +static int mcfqspi_resume(struct device *dev) +{ + struct mcfqspi *mcfqspi = platform_get_drvdata(to_platform_device(dev)); + + clk_enable(mcfqspi->clk); + + return 0; +} + +static struct dev_pm_ops mcfqspi_dev_pm_ops = { + .suspend = mcfqspi_suspend, + .resume = mcfqspi_resume, +}; + +#define MCFQSPI_DEV_PM_OPS (&mcfqspi_dev_pm_ops) +#else +#define MCFQSPI_DEV_PM_OPS NULL +#endif + +static struct platform_driver mcfqspi_driver = { + .driver.name = DRIVER_NAME, + .driver.owner = THIS_MODULE, + .driver.pm = MCFQSPI_DEV_PM_OPS, + .remove = __devexit_p(mcfqspi_remove), +}; + +static int __init mcfqspi_init(void) +{ + return platform_driver_probe(&mcfqspi_driver, mcfqspi_probe); +} +module_init(mcfqspi_init); + +static void __exit mcfqspi_exit(void) +{ + platform_driver_unregister(&mcfqspi_driver); +} +module_exit(mcfqspi_exit); + +MODULE_AUTHOR("Steven King "); +MODULE_DESCRIPTION("Coldfire QSPI Controller Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c new file mode 100644 index 000000000000..1f0ed8005c91 --- /dev/null +++ b/drivers/spi/spi-davinci.c @@ -0,0 +1,1030 @@ +/* + * Copyright (C) 2009 Texas Instruments. + * Copyright (C) 2010 EF Johnson Technologies + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define SPI_NO_RESOURCE ((resource_size_t)-1) + +#define SPI_MAX_CHIPSELECT 2 + +#define CS_DEFAULT 0xFF + +#define SPIFMT_PHASE_MASK BIT(16) +#define SPIFMT_POLARITY_MASK BIT(17) +#define SPIFMT_DISTIMER_MASK BIT(18) +#define SPIFMT_SHIFTDIR_MASK BIT(20) +#define SPIFMT_WAITENA_MASK BIT(21) +#define SPIFMT_PARITYENA_MASK BIT(22) +#define SPIFMT_ODD_PARITY_MASK BIT(23) +#define SPIFMT_WDELAY_MASK 0x3f000000u +#define SPIFMT_WDELAY_SHIFT 24 +#define SPIFMT_PRESCALE_SHIFT 8 + +/* SPIPC0 */ +#define SPIPC0_DIFUN_MASK BIT(11) /* MISO */ +#define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */ +#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */ +#define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */ + +#define SPIINT_MASKALL 0x0101035F +#define SPIINT_MASKINT 0x0000015F +#define SPI_INTLVL_1 0x000001FF +#define SPI_INTLVL_0 0x00000000 + +/* SPIDAT1 (upper 16 bit defines) */ +#define SPIDAT1_CSHOLD_MASK BIT(12) + +/* SPIGCR1 */ +#define SPIGCR1_CLKMOD_MASK BIT(1) +#define SPIGCR1_MASTER_MASK BIT(0) +#define SPIGCR1_POWERDOWN_MASK BIT(8) +#define SPIGCR1_LOOPBACK_MASK BIT(16) +#define SPIGCR1_SPIENA_MASK BIT(24) + +/* SPIBUF */ +#define SPIBUF_TXFULL_MASK BIT(29) +#define SPIBUF_RXEMPTY_MASK BIT(31) + +/* SPIDELAY */ +#define SPIDELAY_C2TDELAY_SHIFT 24 +#define SPIDELAY_C2TDELAY_MASK (0xFF << SPIDELAY_C2TDELAY_SHIFT) +#define SPIDELAY_T2CDELAY_SHIFT 16 +#define SPIDELAY_T2CDELAY_MASK (0xFF << SPIDELAY_T2CDELAY_SHIFT) +#define SPIDELAY_T2EDELAY_SHIFT 8 +#define SPIDELAY_T2EDELAY_MASK (0xFF << SPIDELAY_T2EDELAY_SHIFT) +#define SPIDELAY_C2EDELAY_SHIFT 0 +#define SPIDELAY_C2EDELAY_MASK 0xFF + +/* Error Masks */ +#define SPIFLG_DLEN_ERR_MASK BIT(0) +#define SPIFLG_TIMEOUT_MASK BIT(1) +#define SPIFLG_PARERR_MASK BIT(2) +#define SPIFLG_DESYNC_MASK BIT(3) +#define SPIFLG_BITERR_MASK BIT(4) +#define SPIFLG_OVRRUN_MASK BIT(6) +#define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24) +#define SPIFLG_ERROR_MASK (SPIFLG_DLEN_ERR_MASK \ + | SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \ + | SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \ + | SPIFLG_OVRRUN_MASK) + +#define SPIINT_DMA_REQ_EN BIT(16) + +/* SPI Controller registers */ +#define SPIGCR0 0x00 +#define SPIGCR1 0x04 +#define SPIINT 0x08 +#define SPILVL 0x0c +#define SPIFLG 0x10 +#define SPIPC0 0x14 +#define SPIDAT1 0x3c +#define SPIBUF 0x40 +#define SPIDELAY 0x48 +#define SPIDEF 0x4c +#define SPIFMT0 0x50 + +/* We have 2 DMA channels per CS, one for RX and one for TX */ +struct davinci_spi_dma { + int tx_channel; + int rx_channel; + int dummy_param_slot; + enum dma_event_q eventq; +}; + +/* SPI Controller driver's private data. */ +struct davinci_spi { + struct spi_bitbang bitbang; + struct clk *clk; + + u8 version; + resource_size_t pbase; + void __iomem *base; + u32 irq; + struct completion done; + + const void *tx; + void *rx; +#define SPI_TMP_BUFSZ (SMP_CACHE_BYTES + 1) + u8 rx_tmp_buf[SPI_TMP_BUFSZ]; + int rcount; + int wcount; + struct davinci_spi_dma dma; + struct davinci_spi_platform_data *pdata; + + void (*get_rx)(u32 rx_data, struct davinci_spi *); + u32 (*get_tx)(struct davinci_spi *); + + u8 bytes_per_word[SPI_MAX_CHIPSELECT]; +}; + +static struct davinci_spi_config davinci_spi_default_cfg; + +static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *dspi) +{ + if (dspi->rx) { + u8 *rx = dspi->rx; + *rx++ = (u8)data; + dspi->rx = rx; + } +} + +static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *dspi) +{ + if (dspi->rx) { + u16 *rx = dspi->rx; + *rx++ = (u16)data; + dspi->rx = rx; + } +} + +static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi) +{ + u32 data = 0; + if (dspi->tx) { + const u8 *tx = dspi->tx; + data = *tx++; + dspi->tx = tx; + } + return data; +} + +static u32 davinci_spi_tx_buf_u16(struct davinci_spi *dspi) +{ + u32 data = 0; + if (dspi->tx) { + const u16 *tx = dspi->tx; + data = *tx++; + dspi->tx = tx; + } + return data; +} + +static inline void set_io_bits(void __iomem *addr, u32 bits) +{ + u32 v = ioread32(addr); + + v |= bits; + iowrite32(v, addr); +} + +static inline void clear_io_bits(void __iomem *addr, u32 bits) +{ + u32 v = ioread32(addr); + + v &= ~bits; + iowrite32(v, addr); +} + +/* + * Interface to control the chip select signal + */ +static void davinci_spi_chipselect(struct spi_device *spi, int value) +{ + struct davinci_spi *dspi; + struct davinci_spi_platform_data *pdata; + u8 chip_sel = spi->chip_select; + u16 spidat1 = CS_DEFAULT; + bool gpio_chipsel = false; + + dspi = spi_master_get_devdata(spi->master); + pdata = dspi->pdata; + + if (pdata->chip_sel && chip_sel < pdata->num_chipselect && + pdata->chip_sel[chip_sel] != SPI_INTERN_CS) + gpio_chipsel = true; + + /* + * Board specific chip select logic decides the polarity and cs + * line for the controller + */ + if (gpio_chipsel) { + if (value == BITBANG_CS_ACTIVE) + gpio_set_value(pdata->chip_sel[chip_sel], 0); + else + gpio_set_value(pdata->chip_sel[chip_sel], 1); + } else { + if (value == BITBANG_CS_ACTIVE) { + spidat1 |= SPIDAT1_CSHOLD_MASK; + spidat1 &= ~(0x1 << chip_sel); + } + + iowrite16(spidat1, dspi->base + SPIDAT1 + 2); + } +} + +/** + * davinci_spi_get_prescale - Calculates the correct prescale value + * @maxspeed_hz: the maximum rate the SPI clock can run at + * + * This function calculates the prescale value that generates a clock rate + * less than or equal to the specified maximum. + * + * Returns: calculated prescale - 1 for easy programming into SPI registers + * or negative error number if valid prescalar cannot be updated. + */ +static inline int davinci_spi_get_prescale(struct davinci_spi *dspi, + u32 max_speed_hz) +{ + int ret; + + ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz); + + if (ret < 3 || ret > 256) + return -EINVAL; + + return ret - 1; +} + +/** + * davinci_spi_setup_transfer - This functions will determine transfer method + * @spi: spi device on which data transfer to be done + * @t: spi transfer in which transfer info is filled + * + * This function determines data transfer method (8/16/32 bit transfer). + * It will also set the SPI Clock Control register according to + * SPI slave device freq. + */ +static int davinci_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + + struct davinci_spi *dspi; + struct davinci_spi_config *spicfg; + u8 bits_per_word = 0; + u32 hz = 0, spifmt = 0, prescale = 0; + + dspi = spi_master_get_devdata(spi->master); + spicfg = (struct davinci_spi_config *)spi->controller_data; + if (!spicfg) + spicfg = &davinci_spi_default_cfg; + + if (t) { + bits_per_word = t->bits_per_word; + hz = t->speed_hz; + } + + /* if bits_per_word is not set then set it default */ + if (!bits_per_word) + bits_per_word = spi->bits_per_word; + + /* + * Assign function pointer to appropriate transfer method + * 8bit, 16bit or 32bit transfer + */ + if (bits_per_word <= 8 && bits_per_word >= 2) { + dspi->get_rx = davinci_spi_rx_buf_u8; + dspi->get_tx = davinci_spi_tx_buf_u8; + dspi->bytes_per_word[spi->chip_select] = 1; + } else if (bits_per_word <= 16 && bits_per_word >= 2) { + dspi->get_rx = davinci_spi_rx_buf_u16; + dspi->get_tx = davinci_spi_tx_buf_u16; + dspi->bytes_per_word[spi->chip_select] = 2; + } else + return -EINVAL; + + if (!hz) + hz = spi->max_speed_hz; + + /* Set up SPIFMTn register, unique to this chipselect. */ + + prescale = davinci_spi_get_prescale(dspi, hz); + if (prescale < 0) + return prescale; + + spifmt = (prescale << SPIFMT_PRESCALE_SHIFT) | (bits_per_word & 0x1f); + + if (spi->mode & SPI_LSB_FIRST) + spifmt |= SPIFMT_SHIFTDIR_MASK; + + if (spi->mode & SPI_CPOL) + spifmt |= SPIFMT_POLARITY_MASK; + + if (!(spi->mode & SPI_CPHA)) + spifmt |= SPIFMT_PHASE_MASK; + + /* + * Version 1 hardware supports two basic SPI modes: + * - Standard SPI mode uses 4 pins, with chipselect + * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS) + * (distinct from SPI_3WIRE, with just one data wire; + * or similar variants without MOSI or without MISO) + * + * Version 2 hardware supports an optional handshaking signal, + * so it can support two more modes: + * - 5 pin SPI variant is standard SPI plus SPI_READY + * - 4 pin with enable is (SPI_READY | SPI_NO_CS) + */ + + if (dspi->version == SPI_VERSION_2) { + + u32 delay = 0; + + spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT) + & SPIFMT_WDELAY_MASK); + + if (spicfg->odd_parity) + spifmt |= SPIFMT_ODD_PARITY_MASK; + + if (spicfg->parity_enable) + spifmt |= SPIFMT_PARITYENA_MASK; + + if (spicfg->timer_disable) { + spifmt |= SPIFMT_DISTIMER_MASK; + } else { + delay |= (spicfg->c2tdelay << SPIDELAY_C2TDELAY_SHIFT) + & SPIDELAY_C2TDELAY_MASK; + delay |= (spicfg->t2cdelay << SPIDELAY_T2CDELAY_SHIFT) + & SPIDELAY_T2CDELAY_MASK; + } + + if (spi->mode & SPI_READY) { + spifmt |= SPIFMT_WAITENA_MASK; + delay |= (spicfg->t2edelay << SPIDELAY_T2EDELAY_SHIFT) + & SPIDELAY_T2EDELAY_MASK; + delay |= (spicfg->c2edelay << SPIDELAY_C2EDELAY_SHIFT) + & SPIDELAY_C2EDELAY_MASK; + } + + iowrite32(delay, dspi->base + SPIDELAY); + } + + iowrite32(spifmt, dspi->base + SPIFMT0); + + return 0; +} + +/** + * davinci_spi_setup - This functions will set default transfer method + * @spi: spi device on which data transfer to be done + * + * This functions sets the default transfer method. + */ +static int davinci_spi_setup(struct spi_device *spi) +{ + int retval = 0; + struct davinci_spi *dspi; + struct davinci_spi_platform_data *pdata; + + dspi = spi_master_get_devdata(spi->master); + pdata = dspi->pdata; + + /* if bits per word length is zero then set it default 8 */ + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + if (!(spi->mode & SPI_NO_CS)) { + if ((pdata->chip_sel == NULL) || + (pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS)) + set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select); + + } + + if (spi->mode & SPI_READY) + set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK); + + if (spi->mode & SPI_LOOP) + set_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK); + else + clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK); + + return retval; +} + +static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status) +{ + struct device *sdev = dspi->bitbang.master->dev.parent; + + if (int_status & SPIFLG_TIMEOUT_MASK) { + dev_dbg(sdev, "SPI Time-out Error\n"); + return -ETIMEDOUT; + } + if (int_status & SPIFLG_DESYNC_MASK) { + dev_dbg(sdev, "SPI Desynchronization Error\n"); + return -EIO; + } + if (int_status & SPIFLG_BITERR_MASK) { + dev_dbg(sdev, "SPI Bit error\n"); + return -EIO; + } + + if (dspi->version == SPI_VERSION_2) { + if (int_status & SPIFLG_DLEN_ERR_MASK) { + dev_dbg(sdev, "SPI Data Length Error\n"); + return -EIO; + } + if (int_status & SPIFLG_PARERR_MASK) { + dev_dbg(sdev, "SPI Parity Error\n"); + return -EIO; + } + if (int_status & SPIFLG_OVRRUN_MASK) { + dev_dbg(sdev, "SPI Data Overrun error\n"); + return -EIO; + } + if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) { + dev_dbg(sdev, "SPI Buffer Init Active\n"); + return -EBUSY; + } + } + + return 0; +} + +/** + * davinci_spi_process_events - check for and handle any SPI controller events + * @dspi: the controller data + * + * This function will check the SPIFLG register and handle any events that are + * detected there + */ +static int davinci_spi_process_events(struct davinci_spi *dspi) +{ + u32 buf, status, errors = 0, spidat1; + + buf = ioread32(dspi->base + SPIBUF); + + if (dspi->rcount > 0 && !(buf & SPIBUF_RXEMPTY_MASK)) { + dspi->get_rx(buf & 0xFFFF, dspi); + dspi->rcount--; + } + + status = ioread32(dspi->base + SPIFLG); + + if (unlikely(status & SPIFLG_ERROR_MASK)) { + errors = status & SPIFLG_ERROR_MASK; + goto out; + } + + if (dspi->wcount > 0 && !(buf & SPIBUF_TXFULL_MASK)) { + spidat1 = ioread32(dspi->base + SPIDAT1); + dspi->wcount--; + spidat1 &= ~0xFFFF; + spidat1 |= 0xFFFF & dspi->get_tx(dspi); + iowrite32(spidat1, dspi->base + SPIDAT1); + } + +out: + return errors; +} + +static void davinci_spi_dma_callback(unsigned lch, u16 status, void *data) +{ + struct davinci_spi *dspi = data; + struct davinci_spi_dma *dma = &dspi->dma; + + edma_stop(lch); + + if (status == DMA_COMPLETE) { + if (lch == dma->rx_channel) + dspi->rcount = 0; + if (lch == dma->tx_channel) + dspi->wcount = 0; + } + + if ((!dspi->wcount && !dspi->rcount) || (status != DMA_COMPLETE)) + complete(&dspi->done); +} + +/** + * davinci_spi_bufs - functions which will handle transfer data + * @spi: spi device on which data transfer to be done + * @t: spi transfer in which transfer info is filled + * + * This function will put data to be transferred into data register + * of SPI controller and then wait until the completion will be marked + * by the IRQ Handler. + */ +static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct davinci_spi *dspi; + int data_type, ret; + u32 tx_data, spidat1; + u32 errors = 0; + struct davinci_spi_config *spicfg; + struct davinci_spi_platform_data *pdata; + unsigned uninitialized_var(rx_buf_count); + struct device *sdev; + + dspi = spi_master_get_devdata(spi->master); + pdata = dspi->pdata; + spicfg = (struct davinci_spi_config *)spi->controller_data; + if (!spicfg) + spicfg = &davinci_spi_default_cfg; + sdev = dspi->bitbang.master->dev.parent; + + /* convert len to words based on bits_per_word */ + data_type = dspi->bytes_per_word[spi->chip_select]; + + dspi->tx = t->tx_buf; + dspi->rx = t->rx_buf; + dspi->wcount = t->len / data_type; + dspi->rcount = dspi->wcount; + + spidat1 = ioread32(dspi->base + SPIDAT1); + + clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); + set_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); + + INIT_COMPLETION(dspi->done); + + if (spicfg->io_type == SPI_IO_TYPE_INTR) + set_io_bits(dspi->base + SPIINT, SPIINT_MASKINT); + + if (spicfg->io_type != SPI_IO_TYPE_DMA) { + /* start the transfer */ + dspi->wcount--; + tx_data = dspi->get_tx(dspi); + spidat1 &= 0xFFFF0000; + spidat1 |= tx_data & 0xFFFF; + iowrite32(spidat1, dspi->base + SPIDAT1); + } else { + struct davinci_spi_dma *dma; + unsigned long tx_reg, rx_reg; + struct edmacc_param param; + void *rx_buf; + int b, c; + + dma = &dspi->dma; + + tx_reg = (unsigned long)dspi->pbase + SPIDAT1; + rx_reg = (unsigned long)dspi->pbase + SPIBUF; + + /* + * Transmit DMA setup + * + * If there is transmit data, map the transmit buffer, set it + * as the source of data and set the source B index to data + * size. If there is no transmit data, set the transmit register + * as the source of data, and set the source B index to zero. + * + * The destination is always the transmit register itself. And + * the destination never increments. + */ + + if (t->tx_buf) { + t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf, + t->len, DMA_TO_DEVICE); + if (dma_mapping_error(&spi->dev, t->tx_dma)) { + dev_dbg(sdev, "Unable to DMA map %d bytes" + "TX buffer\n", t->len); + return -ENOMEM; + } + } + + /* + * If number of words is greater than 65535, then we need + * to configure a 3 dimension transfer. Use the BCNTRLD + * feature to allow for transfers that aren't even multiples + * of 65535 (or any other possible b size) by first transferring + * the remainder amount then grabbing the next N blocks of + * 65535 words. + */ + + c = dspi->wcount / (SZ_64K - 1); /* N 65535 Blocks */ + b = dspi->wcount - c * (SZ_64K - 1); /* Remainder */ + if (b) + c++; + else + b = SZ_64K - 1; + + param.opt = TCINTEN | EDMA_TCC(dma->tx_channel); + param.src = t->tx_buf ? t->tx_dma : tx_reg; + param.a_b_cnt = b << 16 | data_type; + param.dst = tx_reg; + param.src_dst_bidx = t->tx_buf ? data_type : 0; + param.link_bcntrld = 0xffffffff; + param.src_dst_cidx = t->tx_buf ? data_type : 0; + param.ccnt = c; + edma_write_slot(dma->tx_channel, ¶m); + edma_link(dma->tx_channel, dma->dummy_param_slot); + + /* + * Receive DMA setup + * + * If there is receive buffer, use it to receive data. If there + * is none provided, use a temporary receive buffer. Set the + * destination B index to 0 so effectively only one byte is used + * in the temporary buffer (address does not increment). + * + * The source of receive data is the receive data register. The + * source address never increments. + */ + + if (t->rx_buf) { + rx_buf = t->rx_buf; + rx_buf_count = t->len; + } else { + rx_buf = dspi->rx_tmp_buf; + rx_buf_count = sizeof(dspi->rx_tmp_buf); + } + + t->rx_dma = dma_map_single(&spi->dev, rx_buf, rx_buf_count, + DMA_FROM_DEVICE); + if (dma_mapping_error(&spi->dev, t->rx_dma)) { + dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n", + rx_buf_count); + if (t->tx_buf) + dma_unmap_single(NULL, t->tx_dma, t->len, + DMA_TO_DEVICE); + return -ENOMEM; + } + + param.opt = TCINTEN | EDMA_TCC(dma->rx_channel); + param.src = rx_reg; + param.a_b_cnt = b << 16 | data_type; + param.dst = t->rx_dma; + param.src_dst_bidx = (t->rx_buf ? data_type : 0) << 16; + param.link_bcntrld = 0xffffffff; + param.src_dst_cidx = (t->rx_buf ? data_type : 0) << 16; + param.ccnt = c; + edma_write_slot(dma->rx_channel, ¶m); + + if (pdata->cshold_bug) + iowrite16(spidat1 >> 16, dspi->base + SPIDAT1 + 2); + + edma_start(dma->rx_channel); + edma_start(dma->tx_channel); + set_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN); + } + + /* Wait for the transfer to complete */ + if (spicfg->io_type != SPI_IO_TYPE_POLL) { + wait_for_completion_interruptible(&(dspi->done)); + } else { + while (dspi->rcount > 0 || dspi->wcount > 0) { + errors = davinci_spi_process_events(dspi); + if (errors) + break; + cpu_relax(); + } + } + + clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL); + if (spicfg->io_type == SPI_IO_TYPE_DMA) { + + if (t->tx_buf) + dma_unmap_single(NULL, t->tx_dma, t->len, + DMA_TO_DEVICE); + + dma_unmap_single(NULL, t->rx_dma, rx_buf_count, + DMA_FROM_DEVICE); + + clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN); + } + + clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); + set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); + + /* + * Check for bit error, desync error,parity error,timeout error and + * receive overflow errors + */ + if (errors) { + ret = davinci_spi_check_error(dspi, errors); + WARN(!ret, "%s: error reported but no error found!\n", + dev_name(&spi->dev)); + return ret; + } + + if (dspi->rcount != 0 || dspi->wcount != 0) { + dev_err(sdev, "SPI data transfer error\n"); + return -EIO; + } + + return t->len; +} + +/** + * davinci_spi_irq - Interrupt handler for SPI Master Controller + * @irq: IRQ number for this SPI Master + * @context_data: structure for SPI Master controller davinci_spi + * + * ISR will determine that interrupt arrives either for READ or WRITE command. + * According to command it will do the appropriate action. It will check + * transfer length and if it is not zero then dispatch transfer command again. + * If transfer length is zero then it will indicate the COMPLETION so that + * davinci_spi_bufs function can go ahead. + */ +static irqreturn_t davinci_spi_irq(s32 irq, void *data) +{ + struct davinci_spi *dspi = data; + int status; + + status = davinci_spi_process_events(dspi); + if (unlikely(status != 0)) + clear_io_bits(dspi->base + SPIINT, SPIINT_MASKINT); + + if ((!dspi->rcount && !dspi->wcount) || status) + complete(&dspi->done); + + return IRQ_HANDLED; +} + +static int davinci_spi_request_dma(struct davinci_spi *dspi) +{ + int r; + struct davinci_spi_dma *dma = &dspi->dma; + + r = edma_alloc_channel(dma->rx_channel, davinci_spi_dma_callback, dspi, + dma->eventq); + if (r < 0) { + pr_err("Unable to request DMA channel for SPI RX\n"); + r = -EAGAIN; + goto rx_dma_failed; + } + + r = edma_alloc_channel(dma->tx_channel, davinci_spi_dma_callback, dspi, + dma->eventq); + if (r < 0) { + pr_err("Unable to request DMA channel for SPI TX\n"); + r = -EAGAIN; + goto tx_dma_failed; + } + + r = edma_alloc_slot(EDMA_CTLR(dma->tx_channel), EDMA_SLOT_ANY); + if (r < 0) { + pr_err("Unable to request SPI TX DMA param slot\n"); + r = -EAGAIN; + goto param_failed; + } + dma->dummy_param_slot = r; + edma_link(dma->dummy_param_slot, dma->dummy_param_slot); + + return 0; +param_failed: + edma_free_channel(dma->tx_channel); +tx_dma_failed: + edma_free_channel(dma->rx_channel); +rx_dma_failed: + return r; +} + +/** + * davinci_spi_probe - probe function for SPI Master Controller + * @pdev: platform_device structure which contains plateform specific data + * + * According to Linux Device Model this function will be invoked by Linux + * with platform_device struct which contains the device specific info. + * This function will map the SPI controller's memory, register IRQ, + * Reset SPI controller and setting its registers to default value. + * It will invoke spi_bitbang_start to create work queue so that client driver + * can register transfer method to work queue. + */ +static int davinci_spi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct davinci_spi *dspi; + struct davinci_spi_platform_data *pdata; + struct resource *r, *mem; + resource_size_t dma_rx_chan = SPI_NO_RESOURCE; + resource_size_t dma_tx_chan = SPI_NO_RESOURCE; + int i = 0, ret = 0; + u32 spipc0; + + pdata = pdev->dev.platform_data; + if (pdata == NULL) { + ret = -ENODEV; + goto err; + } + + master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi)); + if (master == NULL) { + ret = -ENOMEM; + goto err; + } + + dev_set_drvdata(&pdev->dev, master); + + dspi = spi_master_get_devdata(master); + if (dspi == NULL) { + ret = -ENOENT; + goto free_master; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + ret = -ENOENT; + goto free_master; + } + + dspi->pbase = r->start; + dspi->pdata = pdata; + + mem = request_mem_region(r->start, resource_size(r), pdev->name); + if (mem == NULL) { + ret = -EBUSY; + goto free_master; + } + + dspi->base = ioremap(r->start, resource_size(r)); + if (dspi->base == NULL) { + ret = -ENOMEM; + goto release_region; + } + + dspi->irq = platform_get_irq(pdev, 0); + if (dspi->irq <= 0) { + ret = -EINVAL; + goto unmap_io; + } + + ret = request_irq(dspi->irq, davinci_spi_irq, 0, dev_name(&pdev->dev), + dspi); + if (ret) + goto unmap_io; + + dspi->bitbang.master = spi_master_get(master); + if (dspi->bitbang.master == NULL) { + ret = -ENODEV; + goto irq_free; + } + + dspi->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(dspi->clk)) { + ret = -ENODEV; + goto put_master; + } + clk_enable(dspi->clk); + + master->bus_num = pdev->id; + master->num_chipselect = pdata->num_chipselect; + master->setup = davinci_spi_setup; + + dspi->bitbang.chipselect = davinci_spi_chipselect; + dspi->bitbang.setup_transfer = davinci_spi_setup_transfer; + + dspi->version = pdata->version; + + dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP; + if (dspi->version == SPI_VERSION_2) + dspi->bitbang.flags |= SPI_READY; + + r = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (r) + dma_rx_chan = r->start; + r = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (r) + dma_tx_chan = r->start; + + dspi->bitbang.txrx_bufs = davinci_spi_bufs; + if (dma_rx_chan != SPI_NO_RESOURCE && + dma_tx_chan != SPI_NO_RESOURCE) { + dspi->dma.rx_channel = dma_rx_chan; + dspi->dma.tx_channel = dma_tx_chan; + dspi->dma.eventq = pdata->dma_event_q; + + ret = davinci_spi_request_dma(dspi); + if (ret) + goto free_clk; + + dev_info(&pdev->dev, "DMA: supported\n"); + dev_info(&pdev->dev, "DMA: RX channel: %d, TX channel: %d, " + "event queue: %d\n", dma_rx_chan, dma_tx_chan, + pdata->dma_event_q); + } + + dspi->get_rx = davinci_spi_rx_buf_u8; + dspi->get_tx = davinci_spi_tx_buf_u8; + + init_completion(&dspi->done); + + /* Reset In/OUT SPI module */ + iowrite32(0, dspi->base + SPIGCR0); + udelay(100); + iowrite32(1, dspi->base + SPIGCR0); + + /* Set up SPIPC0. CS and ENA init is done in davinci_spi_setup */ + spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK; + iowrite32(spipc0, dspi->base + SPIPC0); + + /* initialize chip selects */ + if (pdata->chip_sel) { + for (i = 0; i < pdata->num_chipselect; i++) { + if (pdata->chip_sel[i] != SPI_INTERN_CS) + gpio_direction_output(pdata->chip_sel[i], 1); + } + } + + if (pdata->intr_line) + iowrite32(SPI_INTLVL_1, dspi->base + SPILVL); + else + iowrite32(SPI_INTLVL_0, dspi->base + SPILVL); + + iowrite32(CS_DEFAULT, dspi->base + SPIDEF); + + /* master mode default */ + set_io_bits(dspi->base + SPIGCR1, SPIGCR1_CLKMOD_MASK); + set_io_bits(dspi->base + SPIGCR1, SPIGCR1_MASTER_MASK); + set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); + + ret = spi_bitbang_start(&dspi->bitbang); + if (ret) + goto free_dma; + + dev_info(&pdev->dev, "Controller at 0x%p\n", dspi->base); + + return ret; + +free_dma: + edma_free_channel(dspi->dma.tx_channel); + edma_free_channel(dspi->dma.rx_channel); + edma_free_slot(dspi->dma.dummy_param_slot); +free_clk: + clk_disable(dspi->clk); + clk_put(dspi->clk); +put_master: + spi_master_put(master); +irq_free: + free_irq(dspi->irq, dspi); +unmap_io: + iounmap(dspi->base); +release_region: + release_mem_region(dspi->pbase, resource_size(r)); +free_master: + kfree(master); +err: + return ret; +} + +/** + * davinci_spi_remove - remove function for SPI Master Controller + * @pdev: platform_device structure which contains plateform specific data + * + * This function will do the reverse action of davinci_spi_probe function + * It will free the IRQ and SPI controller's memory region. + * It will also call spi_bitbang_stop to destroy the work queue which was + * created by spi_bitbang_start. + */ +static int __exit davinci_spi_remove(struct platform_device *pdev) +{ + struct davinci_spi *dspi; + struct spi_master *master; + struct resource *r; + + master = dev_get_drvdata(&pdev->dev); + dspi = spi_master_get_devdata(master); + + spi_bitbang_stop(&dspi->bitbang); + + clk_disable(dspi->clk); + clk_put(dspi->clk); + spi_master_put(master); + free_irq(dspi->irq, dspi); + iounmap(dspi->base); + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(dspi->pbase, resource_size(r)); + + return 0; +} + +static struct platform_driver davinci_spi_driver = { + .driver = { + .name = "spi_davinci", + .owner = THIS_MODULE, + }, + .remove = __exit_p(davinci_spi_remove), +}; + +static int __init davinci_spi_init(void) +{ + return platform_driver_probe(&davinci_spi_driver, davinci_spi_probe); +} +module_init(davinci_spi_init); + +static void __exit davinci_spi_exit(void) +{ + platform_driver_unregister(&davinci_spi_driver); +} +module_exit(davinci_spi_exit); + +MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c new file mode 100644 index 000000000000..130e55537db6 --- /dev/null +++ b/drivers/spi/spi-dw-mid.c @@ -0,0 +1,224 @@ +/* + * Special handling for DW core on Intel MID platform + * + * Copyright (c) 2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, + * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include +#include + +#include "spi-dw.h" + +#ifdef CONFIG_SPI_DW_MID_DMA +#include +#include + +struct mid_dma { + struct intel_mid_dma_slave dmas_tx; + struct intel_mid_dma_slave dmas_rx; +}; + +static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param) +{ + struct dw_spi *dws = param; + + return dws->dmac && (&dws->dmac->dev == chan->device->dev); +} + +static int mid_spi_dma_init(struct dw_spi *dws) +{ + struct mid_dma *dw_dma = dws->dma_priv; + struct intel_mid_dma_slave *rxs, *txs; + dma_cap_mask_t mask; + + /* + * Get pci device for DMA controller, currently it could only + * be the DMA controller of either Moorestown or Medfield + */ + dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0813, NULL); + if (!dws->dmac) + dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL); + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* 1. Init rx channel */ + dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws); + if (!dws->rxchan) + goto err_exit; + rxs = &dw_dma->dmas_rx; + rxs->hs_mode = LNW_DMA_HW_HS; + rxs->cfg_mode = LNW_DMA_PER_TO_MEM; + dws->rxchan->private = rxs; + + /* 2. Init tx channel */ + dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws); + if (!dws->txchan) + goto free_rxchan; + txs = &dw_dma->dmas_tx; + txs->hs_mode = LNW_DMA_HW_HS; + txs->cfg_mode = LNW_DMA_MEM_TO_PER; + dws->txchan->private = txs; + + dws->dma_inited = 1; + return 0; + +free_rxchan: + dma_release_channel(dws->rxchan); +err_exit: + return -1; + +} + +static void mid_spi_dma_exit(struct dw_spi *dws) +{ + dma_release_channel(dws->txchan); + dma_release_channel(dws->rxchan); +} + +/* + * dws->dma_chan_done is cleared before the dma transfer starts, + * callback for rx/tx channel will each increment it by 1. + * Reaching 2 means the whole spi transaction is done. + */ +static void dw_spi_dma_done(void *arg) +{ + struct dw_spi *dws = arg; + + if (++dws->dma_chan_done != 2) + return; + dw_spi_xfer_done(dws); +} + +static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) +{ + struct dma_async_tx_descriptor *txdesc = NULL, *rxdesc = NULL; + struct dma_chan *txchan, *rxchan; + struct dma_slave_config txconf, rxconf; + u16 dma_ctrl = 0; + + /* 1. setup DMA related registers */ + if (cs_change) { + spi_enable_chip(dws, 0); + dw_writew(dws, dmardlr, 0xf); + dw_writew(dws, dmatdlr, 0x10); + if (dws->tx_dma) + dma_ctrl |= 0x2; + if (dws->rx_dma) + dma_ctrl |= 0x1; + dw_writew(dws, dmacr, dma_ctrl); + spi_enable_chip(dws, 1); + } + + dws->dma_chan_done = 0; + txchan = dws->txchan; + rxchan = dws->rxchan; + + /* 2. Prepare the TX dma transfer */ + txconf.direction = DMA_TO_DEVICE; + txconf.dst_addr = dws->dma_addr; + txconf.dst_maxburst = LNW_DMA_MSIZE_16; + txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + + txchan->device->device_control(txchan, DMA_SLAVE_CONFIG, + (unsigned long) &txconf); + + memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl)); + dws->tx_sgl.dma_address = dws->tx_dma; + dws->tx_sgl.length = dws->len; + + txdesc = txchan->device->device_prep_slave_sg(txchan, + &dws->tx_sgl, + 1, + DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP); + txdesc->callback = dw_spi_dma_done; + txdesc->callback_param = dws; + + /* 3. Prepare the RX dma transfer */ + rxconf.direction = DMA_FROM_DEVICE; + rxconf.src_addr = dws->dma_addr; + rxconf.src_maxburst = LNW_DMA_MSIZE_16; + rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + + rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG, + (unsigned long) &rxconf); + + memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl)); + dws->rx_sgl.dma_address = dws->rx_dma; + dws->rx_sgl.length = dws->len; + + rxdesc = rxchan->device->device_prep_slave_sg(rxchan, + &dws->rx_sgl, + 1, + DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP); + rxdesc->callback = dw_spi_dma_done; + rxdesc->callback_param = dws; + + /* rx must be started before tx due to spi instinct */ + rxdesc->tx_submit(rxdesc); + txdesc->tx_submit(txdesc); + return 0; +} + +static struct dw_spi_dma_ops mid_dma_ops = { + .dma_init = mid_spi_dma_init, + .dma_exit = mid_spi_dma_exit, + .dma_transfer = mid_spi_dma_transfer, +}; +#endif + +/* Some specific info for SPI0 controller on Moorestown */ + +/* HW info for MRST CLk Control Unit, one 32b reg */ +#define MRST_SPI_CLK_BASE 100000000 /* 100m */ +#define MRST_CLK_SPI0_REG 0xff11d86c +#define CLK_SPI_BDIV_OFFSET 0 +#define CLK_SPI_BDIV_MASK 0x00000007 +#define CLK_SPI_CDIV_OFFSET 9 +#define CLK_SPI_CDIV_MASK 0x00000e00 +#define CLK_SPI_DISABLE_OFFSET 8 + +int dw_spi_mid_init(struct dw_spi *dws) +{ + u32 *clk_reg, clk_cdiv; + + clk_reg = ioremap_nocache(MRST_CLK_SPI0_REG, 16); + if (!clk_reg) + return -ENOMEM; + + /* get SPI controller operating freq info */ + clk_cdiv = (readl(clk_reg) & CLK_SPI_CDIV_MASK) >> CLK_SPI_CDIV_OFFSET; + dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1); + iounmap(clk_reg); + + dws->num_cs = 16; + dws->fifo_len = 40; /* FIFO has 40 words buffer */ + +#ifdef CONFIG_SPI_DW_MID_DMA + dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL); + if (!dws->dma_priv) + return -ENOMEM; + dws->dma_ops = &mid_dma_ops; +#endif + return 0; +} diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c new file mode 100644 index 000000000000..34eb66501dbf --- /dev/null +++ b/drivers/spi/spi-dw-mmio.c @@ -0,0 +1,151 @@ +/* + * Memory-mapped interface driver for DW SPI Core + * + * Copyright (c) 2010, Octasic semiconductor. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "spi-dw.h" + +#define DRIVER_NAME "dw_spi_mmio" + +struct dw_spi_mmio { + struct dw_spi dws; + struct clk *clk; +}; + +static int __devinit dw_spi_mmio_probe(struct platform_device *pdev) +{ + struct dw_spi_mmio *dwsmmio; + struct dw_spi *dws; + struct resource *mem, *ioarea; + int ret; + + dwsmmio = kzalloc(sizeof(struct dw_spi_mmio), GFP_KERNEL); + if (!dwsmmio) { + ret = -ENOMEM; + goto err_end; + } + + dws = &dwsmmio->dws; + + /* Get basic io resource and map it */ + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "no mem resource?\n"); + ret = -EINVAL; + goto err_kfree; + } + + ioarea = request_mem_region(mem->start, resource_size(mem), + pdev->name); + if (!ioarea) { + dev_err(&pdev->dev, "SPI region already claimed\n"); + ret = -EBUSY; + goto err_kfree; + } + + dws->regs = ioremap_nocache(mem->start, resource_size(mem)); + if (!dws->regs) { + dev_err(&pdev->dev, "SPI region already mapped\n"); + ret = -ENOMEM; + goto err_release_reg; + } + + dws->irq = platform_get_irq(pdev, 0); + if (dws->irq < 0) { + dev_err(&pdev->dev, "no irq resource?\n"); + ret = dws->irq; /* -ENXIO */ + goto err_unmap; + } + + dwsmmio->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(dwsmmio->clk)) { + ret = PTR_ERR(dwsmmio->clk); + goto err_irq; + } + clk_enable(dwsmmio->clk); + + dws->parent_dev = &pdev->dev; + dws->bus_num = 0; + dws->num_cs = 4; + dws->max_freq = clk_get_rate(dwsmmio->clk); + + ret = dw_spi_add_host(dws); + if (ret) + goto err_clk; + + platform_set_drvdata(pdev, dwsmmio); + return 0; + +err_clk: + clk_disable(dwsmmio->clk); + clk_put(dwsmmio->clk); + dwsmmio->clk = NULL; +err_irq: + free_irq(dws->irq, dws); +err_unmap: + iounmap(dws->regs); +err_release_reg: + release_mem_region(mem->start, resource_size(mem)); +err_kfree: + kfree(dwsmmio); +err_end: + return ret; +} + +static int __devexit dw_spi_mmio_remove(struct platform_device *pdev) +{ + struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev); + struct resource *mem; + + platform_set_drvdata(pdev, NULL); + + clk_disable(dwsmmio->clk); + clk_put(dwsmmio->clk); + dwsmmio->clk = NULL; + + free_irq(dwsmmio->dws.irq, &dwsmmio->dws); + dw_spi_remove_host(&dwsmmio->dws); + iounmap(dwsmmio->dws.regs); + kfree(dwsmmio); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(mem->start, resource_size(mem)); + return 0; +} + +static struct platform_driver dw_spi_mmio_driver = { + .remove = __devexit_p(dw_spi_mmio_remove), + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init dw_spi_mmio_init(void) +{ + return platform_driver_probe(&dw_spi_mmio_driver, dw_spi_mmio_probe); +} +module_init(dw_spi_mmio_init); + +static void __exit dw_spi_mmio_exit(void) +{ + platform_driver_unregister(&dw_spi_mmio_driver); +} +module_exit(dw_spi_mmio_exit); + +MODULE_AUTHOR("Jean-Hugues Deschenes "); +MODULE_DESCRIPTION("Memory-mapped I/O interface driver for DW SPI Core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c new file mode 100644 index 000000000000..c5f37f03ac8b --- /dev/null +++ b/drivers/spi/spi-dw-pci.c @@ -0,0 +1,181 @@ +/* + * PCI interface driver for DW SPI Core + * + * Copyright (c) 2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, + * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include + +#include "spi-dw.h" + +#define DRIVER_NAME "dw_spi_pci" + +struct dw_spi_pci { + struct pci_dev *pdev; + struct dw_spi dws; +}; + +static int __devinit spi_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct dw_spi_pci *dwpci; + struct dw_spi *dws; + int pci_bar = 0; + int ret; + + printk(KERN_INFO "DW: found PCI SPI controller(ID: %04x:%04x)\n", + pdev->vendor, pdev->device); + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + dwpci = kzalloc(sizeof(struct dw_spi_pci), GFP_KERNEL); + if (!dwpci) { + ret = -ENOMEM; + goto err_disable; + } + + dwpci->pdev = pdev; + dws = &dwpci->dws; + + /* Get basic io resource and map it */ + dws->paddr = pci_resource_start(pdev, pci_bar); + dws->iolen = pci_resource_len(pdev, pci_bar); + + ret = pci_request_region(pdev, pci_bar, dev_name(&pdev->dev)); + if (ret) + goto err_kfree; + + dws->regs = ioremap_nocache((unsigned long)dws->paddr, + pci_resource_len(pdev, pci_bar)); + if (!dws->regs) { + ret = -ENOMEM; + goto err_release_reg; + } + + dws->parent_dev = &pdev->dev; + dws->bus_num = 0; + dws->num_cs = 4; + dws->irq = pdev->irq; + + /* + * Specific handling for Intel MID paltforms, like dma setup, + * clock rate, FIFO depth. + */ + if (pdev->device == 0x0800) { + ret = dw_spi_mid_init(dws); + if (ret) + goto err_unmap; + } + + ret = dw_spi_add_host(dws); + if (ret) + goto err_unmap; + + /* PCI hook and SPI hook use the same drv data */ + pci_set_drvdata(pdev, dwpci); + return 0; + +err_unmap: + iounmap(dws->regs); +err_release_reg: + pci_release_region(pdev, pci_bar); +err_kfree: + kfree(dwpci); +err_disable: + pci_disable_device(pdev); + return ret; +} + +static void __devexit spi_pci_remove(struct pci_dev *pdev) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + + pci_set_drvdata(pdev, NULL); + dw_spi_remove_host(&dwpci->dws); + iounmap(dwpci->dws.regs); + pci_release_region(pdev, 0); + kfree(dwpci); + pci_disable_device(pdev); +} + +#ifdef CONFIG_PM +static int spi_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + int ret; + + ret = dw_spi_suspend_host(&dwpci->dws); + if (ret) + return ret; + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return ret; +} + +static int spi_resume(struct pci_dev *pdev) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + int ret; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + ret = pci_enable_device(pdev); + if (ret) + return ret; + return dw_spi_resume_host(&dwpci->dws); +} +#else +#define spi_suspend NULL +#define spi_resume NULL +#endif + +static const struct pci_device_id pci_ids[] __devinitdata = { + /* Intel MID platform SPI controller 0 */ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) }, + {}, +}; + +static struct pci_driver dw_spi_driver = { + .name = DRIVER_NAME, + .id_table = pci_ids, + .probe = spi_pci_probe, + .remove = __devexit_p(spi_pci_remove), + .suspend = spi_suspend, + .resume = spi_resume, +}; + +static int __init mrst_spi_init(void) +{ + return pci_register_driver(&dw_spi_driver); +} + +static void __exit mrst_spi_exit(void) +{ + pci_unregister_driver(&dw_spi_driver); +} + +module_init(mrst_spi_init); +module_exit(mrst_spi_exit); + +MODULE_AUTHOR("Feng Tang "); +MODULE_DESCRIPTION("PCI interface driver for DW SPI Core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c new file mode 100644 index 000000000000..ece5f69deaaf --- /dev/null +++ b/drivers/spi/spi-dw.c @@ -0,0 +1,936 @@ +/* + * Designware SPI core controller driver (refer pxa2xx_spi.c) + * + * Copyright (c) 2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include +#include +#include + +#include "spi-dw.h" + +#ifdef CONFIG_DEBUG_FS +#include +#endif + +#define START_STATE ((void *)0) +#define RUNNING_STATE ((void *)1) +#define DONE_STATE ((void *)2) +#define ERROR_STATE ((void *)-1) + +#define QUEUE_RUNNING 0 +#define QUEUE_STOPPED 1 + +#define MRST_SPI_DEASSERT 0 +#define MRST_SPI_ASSERT 1 + +/* Slave spi_dev related */ +struct chip_data { + u16 cr0; + u8 cs; /* chip select pin */ + u8 n_bytes; /* current is a 1/2/4 byte op */ + u8 tmode; /* TR/TO/RO/EEPROM */ + u8 type; /* SPI/SSP/MicroWire */ + + u8 poll_mode; /* 1 means use poll mode */ + + u32 dma_width; + u32 rx_threshold; + u32 tx_threshold; + u8 enable_dma; + u8 bits_per_word; + u16 clk_div; /* baud rate divider */ + u32 speed_hz; /* baud rate */ + void (*cs_control)(u32 command); +}; + +#ifdef CONFIG_DEBUG_FS +static int spi_show_regs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +#define SPI_REGS_BUFSIZE 1024 +static ssize_t spi_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct dw_spi *dws; + char *buf; + u32 len = 0; + ssize_t ret; + + dws = file->private_data; + + buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "MRST SPI0 registers:\n"); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "CTRL0: \t\t0x%08x\n", dw_readl(dws, ctrl0)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "CTRL1: \t\t0x%08x\n", dw_readl(dws, ctrl1)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SSIENR: \t0x%08x\n", dw_readl(dws, ssienr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SER: \t\t0x%08x\n", dw_readl(dws, ser)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "BAUDR: \t\t0x%08x\n", dw_readl(dws, baudr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "TXFTLR: \t0x%08x\n", dw_readl(dws, txfltr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "RXFTLR: \t0x%08x\n", dw_readl(dws, rxfltr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "TXFLR: \t\t0x%08x\n", dw_readl(dws, txflr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "RXFLR: \t\t0x%08x\n", dw_readl(dws, rxflr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SR: \t\t0x%08x\n", dw_readl(dws, sr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "IMR: \t\t0x%08x\n", dw_readl(dws, imr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "ISR: \t\t0x%08x\n", dw_readl(dws, isr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMACR: \t\t0x%08x\n", dw_readl(dws, dmacr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMATDLR: \t0x%08x\n", dw_readl(dws, dmatdlr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMARDLR: \t0x%08x\n", dw_readl(dws, dmardlr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "=================================\n"); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static const struct file_operations mrst_spi_regs_ops = { + .owner = THIS_MODULE, + .open = spi_show_regs_open, + .read = spi_show_regs, + .llseek = default_llseek, +}; + +static int mrst_spi_debugfs_init(struct dw_spi *dws) +{ + dws->debugfs = debugfs_create_dir("mrst_spi", NULL); + if (!dws->debugfs) + return -ENOMEM; + + debugfs_create_file("registers", S_IFREG | S_IRUGO, + dws->debugfs, (void *)dws, &mrst_spi_regs_ops); + return 0; +} + +static void mrst_spi_debugfs_remove(struct dw_spi *dws) +{ + if (dws->debugfs) + debugfs_remove_recursive(dws->debugfs); +} + +#else +static inline int mrst_spi_debugfs_init(struct dw_spi *dws) +{ + return 0; +} + +static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +/* Return the max entries we can fill into tx fifo */ +static inline u32 tx_max(struct dw_spi *dws) +{ + u32 tx_left, tx_room, rxtx_gap; + + tx_left = (dws->tx_end - dws->tx) / dws->n_bytes; + tx_room = dws->fifo_len - dw_readw(dws, txflr); + + /* + * Another concern is about the tx/rx mismatch, we + * though to use (dws->fifo_len - rxflr - txflr) as + * one maximum value for tx, but it doesn't cover the + * data which is out of tx/rx fifo and inside the + * shift registers. So a control from sw point of + * view is taken. + */ + rxtx_gap = ((dws->rx_end - dws->rx) - (dws->tx_end - dws->tx)) + / dws->n_bytes; + + return min3(tx_left, tx_room, (u32) (dws->fifo_len - rxtx_gap)); +} + +/* Return the max entries we should read out of rx fifo */ +static inline u32 rx_max(struct dw_spi *dws) +{ + u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes; + + return min(rx_left, (u32)dw_readw(dws, rxflr)); +} + +static void dw_writer(struct dw_spi *dws) +{ + u32 max = tx_max(dws); + u16 txw = 0; + + while (max--) { + /* Set the tx word if the transfer's original "tx" is not null */ + if (dws->tx_end - dws->len) { + if (dws->n_bytes == 1) + txw = *(u8 *)(dws->tx); + else + txw = *(u16 *)(dws->tx); + } + dw_writew(dws, dr, txw); + dws->tx += dws->n_bytes; + } +} + +static void dw_reader(struct dw_spi *dws) +{ + u32 max = rx_max(dws); + u16 rxw; + + while (max--) { + rxw = dw_readw(dws, dr); + /* Care rx only if the transfer's original "rx" is not null */ + if (dws->rx_end - dws->len) { + if (dws->n_bytes == 1) + *(u8 *)(dws->rx) = rxw; + else + *(u16 *)(dws->rx) = rxw; + } + dws->rx += dws->n_bytes; + } +} + +static void *next_transfer(struct dw_spi *dws) +{ + struct spi_message *msg = dws->cur_msg; + struct spi_transfer *trans = dws->cur_transfer; + + /* Move to next transfer */ + if (trans->transfer_list.next != &msg->transfers) { + dws->cur_transfer = + list_entry(trans->transfer_list.next, + struct spi_transfer, + transfer_list); + return RUNNING_STATE; + } else + return DONE_STATE; +} + +/* + * Note: first step is the protocol driver prepares + * a dma-capable memory, and this func just need translate + * the virt addr to physical + */ +static int map_dma_buffers(struct dw_spi *dws) +{ + if (!dws->cur_msg->is_dma_mapped + || !dws->dma_inited + || !dws->cur_chip->enable_dma + || !dws->dma_ops) + return 0; + + if (dws->cur_transfer->tx_dma) + dws->tx_dma = dws->cur_transfer->tx_dma; + + if (dws->cur_transfer->rx_dma) + dws->rx_dma = dws->cur_transfer->rx_dma; + + return 1; +} + +/* Caller already set message->status; dma and pio irqs are blocked */ +static void giveback(struct dw_spi *dws) +{ + struct spi_transfer *last_transfer; + unsigned long flags; + struct spi_message *msg; + + spin_lock_irqsave(&dws->lock, flags); + msg = dws->cur_msg; + dws->cur_msg = NULL; + dws->cur_transfer = NULL; + dws->prev_chip = dws->cur_chip; + dws->cur_chip = NULL; + dws->dma_mapped = 0; + queue_work(dws->workqueue, &dws->pump_messages); + spin_unlock_irqrestore(&dws->lock, flags); + + last_transfer = list_entry(msg->transfers.prev, + struct spi_transfer, + transfer_list); + + if (!last_transfer->cs_change && dws->cs_control) + dws->cs_control(MRST_SPI_DEASSERT); + + msg->state = NULL; + if (msg->complete) + msg->complete(msg->context); +} + +static void int_error_stop(struct dw_spi *dws, const char *msg) +{ + /* Stop the hw */ + spi_enable_chip(dws, 0); + + dev_err(&dws->master->dev, "%s\n", msg); + dws->cur_msg->state = ERROR_STATE; + tasklet_schedule(&dws->pump_transfers); +} + +void dw_spi_xfer_done(struct dw_spi *dws) +{ + /* Update total byte transferred return count actual bytes read */ + dws->cur_msg->actual_length += dws->len; + + /* Move to next transfer */ + dws->cur_msg->state = next_transfer(dws); + + /* Handle end of message */ + if (dws->cur_msg->state == DONE_STATE) { + dws->cur_msg->status = 0; + giveback(dws); + } else + tasklet_schedule(&dws->pump_transfers); +} +EXPORT_SYMBOL_GPL(dw_spi_xfer_done); + +static irqreturn_t interrupt_transfer(struct dw_spi *dws) +{ + u16 irq_status = dw_readw(dws, isr); + + /* Error handling */ + if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) { + dw_readw(dws, txoicr); + dw_readw(dws, rxoicr); + dw_readw(dws, rxuicr); + int_error_stop(dws, "interrupt_transfer: fifo overrun/underrun"); + return IRQ_HANDLED; + } + + dw_reader(dws); + if (dws->rx_end == dws->rx) { + spi_mask_intr(dws, SPI_INT_TXEI); + dw_spi_xfer_done(dws); + return IRQ_HANDLED; + } + if (irq_status & SPI_INT_TXEI) { + spi_mask_intr(dws, SPI_INT_TXEI); + dw_writer(dws); + /* Enable TX irq always, it will be disabled when RX finished */ + spi_umask_intr(dws, SPI_INT_TXEI); + } + + return IRQ_HANDLED; +} + +static irqreturn_t dw_spi_irq(int irq, void *dev_id) +{ + struct dw_spi *dws = dev_id; + u16 irq_status = dw_readw(dws, isr) & 0x3f; + + if (!irq_status) + return IRQ_NONE; + + if (!dws->cur_msg) { + spi_mask_intr(dws, SPI_INT_TXEI); + return IRQ_HANDLED; + } + + return dws->transfer_handler(dws); +} + +/* Must be called inside pump_transfers() */ +static void poll_transfer(struct dw_spi *dws) +{ + do { + dw_writer(dws); + dw_reader(dws); + cpu_relax(); + } while (dws->rx_end > dws->rx); + + dw_spi_xfer_done(dws); +} + +static void pump_transfers(unsigned long data) +{ + struct dw_spi *dws = (struct dw_spi *)data; + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + struct spi_device *spi = NULL; + struct chip_data *chip = NULL; + u8 bits = 0; + u8 imask = 0; + u8 cs_change = 0; + u16 txint_level = 0; + u16 clk_div = 0; + u32 speed = 0; + u32 cr0 = 0; + + /* Get current state information */ + message = dws->cur_msg; + transfer = dws->cur_transfer; + chip = dws->cur_chip; + spi = message->spi; + + if (unlikely(!chip->clk_div)) + chip->clk_div = dws->max_freq / chip->speed_hz; + + if (message->state == ERROR_STATE) { + message->status = -EIO; + goto early_exit; + } + + /* Handle end of message */ + if (message->state == DONE_STATE) { + message->status = 0; + goto early_exit; + } + + /* Delay if requested at end of transfer*/ + if (message->state == RUNNING_STATE) { + previous = list_entry(transfer->transfer_list.prev, + struct spi_transfer, + transfer_list); + if (previous->delay_usecs) + udelay(previous->delay_usecs); + } + + dws->n_bytes = chip->n_bytes; + dws->dma_width = chip->dma_width; + dws->cs_control = chip->cs_control; + + dws->rx_dma = transfer->rx_dma; + dws->tx_dma = transfer->tx_dma; + dws->tx = (void *)transfer->tx_buf; + dws->tx_end = dws->tx + transfer->len; + dws->rx = transfer->rx_buf; + dws->rx_end = dws->rx + transfer->len; + dws->cs_change = transfer->cs_change; + dws->len = dws->cur_transfer->len; + if (chip != dws->prev_chip) + cs_change = 1; + + cr0 = chip->cr0; + + /* Handle per transfer options for bpw and speed */ + if (transfer->speed_hz) { + speed = chip->speed_hz; + + if (transfer->speed_hz != speed) { + speed = transfer->speed_hz; + if (speed > dws->max_freq) { + printk(KERN_ERR "MRST SPI0: unsupported" + "freq: %dHz\n", speed); + message->status = -EIO; + goto early_exit; + } + + /* clk_div doesn't support odd number */ + clk_div = dws->max_freq / speed; + clk_div = (clk_div + 1) & 0xfffe; + + chip->speed_hz = speed; + chip->clk_div = clk_div; + } + } + if (transfer->bits_per_word) { + bits = transfer->bits_per_word; + + switch (bits) { + case 8: + case 16: + dws->n_bytes = dws->dma_width = bits >> 3; + break; + default: + printk(KERN_ERR "MRST SPI0: unsupported bits:" + "%db\n", bits); + message->status = -EIO; + goto early_exit; + } + + cr0 = (bits - 1) + | (chip->type << SPI_FRF_OFFSET) + | (spi->mode << SPI_MODE_OFFSET) + | (chip->tmode << SPI_TMOD_OFFSET); + } + message->state = RUNNING_STATE; + + /* + * Adjust transfer mode if necessary. Requires platform dependent + * chipselect mechanism. + */ + if (dws->cs_control) { + if (dws->rx && dws->tx) + chip->tmode = SPI_TMOD_TR; + else if (dws->rx) + chip->tmode = SPI_TMOD_RO; + else + chip->tmode = SPI_TMOD_TO; + + cr0 &= ~SPI_TMOD_MASK; + cr0 |= (chip->tmode << SPI_TMOD_OFFSET); + } + + /* Check if current transfer is a DMA transaction */ + dws->dma_mapped = map_dma_buffers(dws); + + /* + * Interrupt mode + * we only need set the TXEI IRQ, as TX/RX always happen syncronizely + */ + if (!dws->dma_mapped && !chip->poll_mode) { + int templen = dws->len / dws->n_bytes; + txint_level = dws->fifo_len / 2; + txint_level = (templen > txint_level) ? txint_level : templen; + + imask |= SPI_INT_TXEI | SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI; + dws->transfer_handler = interrupt_transfer; + } + + /* + * Reprogram registers only if + * 1. chip select changes + * 2. clk_div is changed + * 3. control value changes + */ + if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div || imask) { + spi_enable_chip(dws, 0); + + if (dw_readw(dws, ctrl0) != cr0) + dw_writew(dws, ctrl0, cr0); + + spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); + spi_chip_sel(dws, spi->chip_select); + + /* Set the interrupt mask, for poll mode just disable all int */ + spi_mask_intr(dws, 0xff); + if (imask) + spi_umask_intr(dws, imask); + if (txint_level) + dw_writew(dws, txfltr, txint_level); + + spi_enable_chip(dws, 1); + if (cs_change) + dws->prev_chip = chip; + } + + if (dws->dma_mapped) + dws->dma_ops->dma_transfer(dws, cs_change); + + if (chip->poll_mode) + poll_transfer(dws); + + return; + +early_exit: + giveback(dws); + return; +} + +static void pump_messages(struct work_struct *work) +{ + struct dw_spi *dws = + container_of(work, struct dw_spi, pump_messages); + unsigned long flags; + + /* Lock queue and check for queue work */ + spin_lock_irqsave(&dws->lock, flags); + if (list_empty(&dws->queue) || dws->run == QUEUE_STOPPED) { + dws->busy = 0; + spin_unlock_irqrestore(&dws->lock, flags); + return; + } + + /* Make sure we are not already running a message */ + if (dws->cur_msg) { + spin_unlock_irqrestore(&dws->lock, flags); + return; + } + + /* Extract head of queue */ + dws->cur_msg = list_entry(dws->queue.next, struct spi_message, queue); + list_del_init(&dws->cur_msg->queue); + + /* Initial message state*/ + dws->cur_msg->state = START_STATE; + dws->cur_transfer = list_entry(dws->cur_msg->transfers.next, + struct spi_transfer, + transfer_list); + dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi); + + /* Mark as busy and launch transfers */ + tasklet_schedule(&dws->pump_transfers); + + dws->busy = 1; + spin_unlock_irqrestore(&dws->lock, flags); +} + +/* spi_device use this to queue in their spi_msg */ +static int dw_spi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct dw_spi *dws = spi_master_get_devdata(spi->master); + unsigned long flags; + + spin_lock_irqsave(&dws->lock, flags); + + if (dws->run == QUEUE_STOPPED) { + spin_unlock_irqrestore(&dws->lock, flags); + return -ESHUTDOWN; + } + + msg->actual_length = 0; + msg->status = -EINPROGRESS; + msg->state = START_STATE; + + list_add_tail(&msg->queue, &dws->queue); + + if (dws->run == QUEUE_RUNNING && !dws->busy) { + + if (dws->cur_transfer || dws->cur_msg) + queue_work(dws->workqueue, + &dws->pump_messages); + else { + /* If no other data transaction in air, just go */ + spin_unlock_irqrestore(&dws->lock, flags); + pump_messages(&dws->pump_messages); + return 0; + } + } + + spin_unlock_irqrestore(&dws->lock, flags); + return 0; +} + +/* This may be called twice for each spi dev */ +static int dw_spi_setup(struct spi_device *spi) +{ + struct dw_spi_chip *chip_info = NULL; + struct chip_data *chip; + + if (spi->bits_per_word != 8 && spi->bits_per_word != 16) + return -EINVAL; + + /* Only alloc on first setup */ + chip = spi_get_ctldata(spi); + if (!chip) { + chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); + if (!chip) + return -ENOMEM; + } + + /* + * Protocol drivers may change the chip settings, so... + * if chip_info exists, use it + */ + chip_info = spi->controller_data; + + /* chip_info doesn't always exist */ + if (chip_info) { + if (chip_info->cs_control) + chip->cs_control = chip_info->cs_control; + + chip->poll_mode = chip_info->poll_mode; + chip->type = chip_info->type; + + chip->rx_threshold = 0; + chip->tx_threshold = 0; + + chip->enable_dma = chip_info->enable_dma; + } + + if (spi->bits_per_word <= 8) { + chip->n_bytes = 1; + chip->dma_width = 1; + } else if (spi->bits_per_word <= 16) { + chip->n_bytes = 2; + chip->dma_width = 2; + } else { + /* Never take >16b case for MRST SPIC */ + dev_err(&spi->dev, "invalid wordsize\n"); + return -EINVAL; + } + chip->bits_per_word = spi->bits_per_word; + + if (!spi->max_speed_hz) { + dev_err(&spi->dev, "No max speed HZ parameter\n"); + return -EINVAL; + } + chip->speed_hz = spi->max_speed_hz; + + chip->tmode = 0; /* Tx & Rx */ + /* Default SPI mode is SCPOL = 0, SCPH = 0 */ + chip->cr0 = (chip->bits_per_word - 1) + | (chip->type << SPI_FRF_OFFSET) + | (spi->mode << SPI_MODE_OFFSET) + | (chip->tmode << SPI_TMOD_OFFSET); + + spi_set_ctldata(spi, chip); + return 0; +} + +static void dw_spi_cleanup(struct spi_device *spi) +{ + struct chip_data *chip = spi_get_ctldata(spi); + kfree(chip); +} + +static int __devinit init_queue(struct dw_spi *dws) +{ + INIT_LIST_HEAD(&dws->queue); + spin_lock_init(&dws->lock); + + dws->run = QUEUE_STOPPED; + dws->busy = 0; + + tasklet_init(&dws->pump_transfers, + pump_transfers, (unsigned long)dws); + + INIT_WORK(&dws->pump_messages, pump_messages); + dws->workqueue = create_singlethread_workqueue( + dev_name(dws->master->dev.parent)); + if (dws->workqueue == NULL) + return -EBUSY; + + return 0; +} + +static int start_queue(struct dw_spi *dws) +{ + unsigned long flags; + + spin_lock_irqsave(&dws->lock, flags); + + if (dws->run == QUEUE_RUNNING || dws->busy) { + spin_unlock_irqrestore(&dws->lock, flags); + return -EBUSY; + } + + dws->run = QUEUE_RUNNING; + dws->cur_msg = NULL; + dws->cur_transfer = NULL; + dws->cur_chip = NULL; + dws->prev_chip = NULL; + spin_unlock_irqrestore(&dws->lock, flags); + + queue_work(dws->workqueue, &dws->pump_messages); + + return 0; +} + +static int stop_queue(struct dw_spi *dws) +{ + unsigned long flags; + unsigned limit = 50; + int status = 0; + + spin_lock_irqsave(&dws->lock, flags); + dws->run = QUEUE_STOPPED; + while ((!list_empty(&dws->queue) || dws->busy) && limit--) { + spin_unlock_irqrestore(&dws->lock, flags); + msleep(10); + spin_lock_irqsave(&dws->lock, flags); + } + + if (!list_empty(&dws->queue) || dws->busy) + status = -EBUSY; + spin_unlock_irqrestore(&dws->lock, flags); + + return status; +} + +static int destroy_queue(struct dw_spi *dws) +{ + int status; + + status = stop_queue(dws); + if (status != 0) + return status; + destroy_workqueue(dws->workqueue); + return 0; +} + +/* Restart the controller, disable all interrupts, clean rx fifo */ +static void spi_hw_init(struct dw_spi *dws) +{ + spi_enable_chip(dws, 0); + spi_mask_intr(dws, 0xff); + spi_enable_chip(dws, 1); + + /* + * Try to detect the FIFO depth if not set by interface driver, + * the depth could be from 2 to 256 from HW spec + */ + if (!dws->fifo_len) { + u32 fifo; + for (fifo = 2; fifo <= 257; fifo++) { + dw_writew(dws, txfltr, fifo); + if (fifo != dw_readw(dws, txfltr)) + break; + } + + dws->fifo_len = (fifo == 257) ? 0 : fifo; + dw_writew(dws, txfltr, 0); + } +} + +int __devinit dw_spi_add_host(struct dw_spi *dws) +{ + struct spi_master *master; + int ret; + + BUG_ON(dws == NULL); + + master = spi_alloc_master(dws->parent_dev, 0); + if (!master) { + ret = -ENOMEM; + goto exit; + } + + dws->master = master; + dws->type = SSI_MOTO_SPI; + dws->prev_chip = NULL; + dws->dma_inited = 0; + dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60); + + ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, + "dw_spi", dws); + if (ret < 0) { + dev_err(&master->dev, "can not get IRQ\n"); + goto err_free_master; + } + + master->mode_bits = SPI_CPOL | SPI_CPHA; + master->bus_num = dws->bus_num; + master->num_chipselect = dws->num_cs; + master->cleanup = dw_spi_cleanup; + master->setup = dw_spi_setup; + master->transfer = dw_spi_transfer; + + /* Basic HW init */ + spi_hw_init(dws); + + if (dws->dma_ops && dws->dma_ops->dma_init) { + ret = dws->dma_ops->dma_init(dws); + if (ret) { + dev_warn(&master->dev, "DMA init failed\n"); + dws->dma_inited = 0; + } + } + + /* Initial and start queue */ + ret = init_queue(dws); + if (ret) { + dev_err(&master->dev, "problem initializing queue\n"); + goto err_diable_hw; + } + ret = start_queue(dws); + if (ret) { + dev_err(&master->dev, "problem starting queue\n"); + goto err_diable_hw; + } + + spi_master_set_devdata(master, dws); + ret = spi_register_master(master); + if (ret) { + dev_err(&master->dev, "problem registering spi master\n"); + goto err_queue_alloc; + } + + mrst_spi_debugfs_init(dws); + return 0; + +err_queue_alloc: + destroy_queue(dws); + if (dws->dma_ops && dws->dma_ops->dma_exit) + dws->dma_ops->dma_exit(dws); +err_diable_hw: + spi_enable_chip(dws, 0); + free_irq(dws->irq, dws); +err_free_master: + spi_master_put(master); +exit: + return ret; +} +EXPORT_SYMBOL_GPL(dw_spi_add_host); + +void __devexit dw_spi_remove_host(struct dw_spi *dws) +{ + int status = 0; + + if (!dws) + return; + mrst_spi_debugfs_remove(dws); + + /* Remove the queue */ + status = destroy_queue(dws); + if (status != 0) + dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not " + "complete, message memory not freed\n"); + + if (dws->dma_ops && dws->dma_ops->dma_exit) + dws->dma_ops->dma_exit(dws); + spi_enable_chip(dws, 0); + /* Disable clk */ + spi_set_clk(dws, 0); + free_irq(dws->irq, dws); + + /* Disconnect from the SPI framework */ + spi_unregister_master(dws->master); +} +EXPORT_SYMBOL_GPL(dw_spi_remove_host); + +int dw_spi_suspend_host(struct dw_spi *dws) +{ + int ret = 0; + + ret = stop_queue(dws); + if (ret) + return ret; + spi_enable_chip(dws, 0); + spi_set_clk(dws, 0); + return ret; +} +EXPORT_SYMBOL_GPL(dw_spi_suspend_host); + +int dw_spi_resume_host(struct dw_spi *dws) +{ + int ret; + + spi_hw_init(dws); + ret = start_queue(dws); + if (ret) + dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret); + return ret; +} +EXPORT_SYMBOL_GPL(dw_spi_resume_host); + +MODULE_AUTHOR("Feng Tang "); +MODULE_DESCRIPTION("Driver for DesignWare SPI controller core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h new file mode 100644 index 000000000000..7a5e78d2a5cb --- /dev/null +++ b/drivers/spi/spi-dw.h @@ -0,0 +1,232 @@ +#ifndef DW_SPI_HEADER_H +#define DW_SPI_HEADER_H + +#include +#include + +/* Bit fields in CTRLR0 */ +#define SPI_DFS_OFFSET 0 + +#define SPI_FRF_OFFSET 4 +#define SPI_FRF_SPI 0x0 +#define SPI_FRF_SSP 0x1 +#define SPI_FRF_MICROWIRE 0x2 +#define SPI_FRF_RESV 0x3 + +#define SPI_MODE_OFFSET 6 +#define SPI_SCPH_OFFSET 6 +#define SPI_SCOL_OFFSET 7 + +#define SPI_TMOD_OFFSET 8 +#define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET) +#define SPI_TMOD_TR 0x0 /* xmit & recv */ +#define SPI_TMOD_TO 0x1 /* xmit only */ +#define SPI_TMOD_RO 0x2 /* recv only */ +#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */ + +#define SPI_SLVOE_OFFSET 10 +#define SPI_SRL_OFFSET 11 +#define SPI_CFS_OFFSET 12 + +/* Bit fields in SR, 7 bits */ +#define SR_MASK 0x7f /* cover 7 bits */ +#define SR_BUSY (1 << 0) +#define SR_TF_NOT_FULL (1 << 1) +#define SR_TF_EMPT (1 << 2) +#define SR_RF_NOT_EMPT (1 << 3) +#define SR_RF_FULL (1 << 4) +#define SR_TX_ERR (1 << 5) +#define SR_DCOL (1 << 6) + +/* Bit fields in ISR, IMR, RISR, 7 bits */ +#define SPI_INT_TXEI (1 << 0) +#define SPI_INT_TXOI (1 << 1) +#define SPI_INT_RXUI (1 << 2) +#define SPI_INT_RXOI (1 << 3) +#define SPI_INT_RXFI (1 << 4) +#define SPI_INT_MSTI (1 << 5) + +/* TX RX interrupt level threshold, max can be 256 */ +#define SPI_INT_THRESHOLD 32 + +enum dw_ssi_type { + SSI_MOTO_SPI = 0, + SSI_TI_SSP, + SSI_NS_MICROWIRE, +}; + +struct dw_spi_reg { + u32 ctrl0; + u32 ctrl1; + u32 ssienr; + u32 mwcr; + u32 ser; + u32 baudr; + u32 txfltr; + u32 rxfltr; + u32 txflr; + u32 rxflr; + u32 sr; + u32 imr; + u32 isr; + u32 risr; + u32 txoicr; + u32 rxoicr; + u32 rxuicr; + u32 msticr; + u32 icr; + u32 dmacr; + u32 dmatdlr; + u32 dmardlr; + u32 idr; + u32 version; + u32 dr; /* Currently oper as 32 bits, + though only low 16 bits matters */ +} __packed; + +struct dw_spi; +struct dw_spi_dma_ops { + int (*dma_init)(struct dw_spi *dws); + void (*dma_exit)(struct dw_spi *dws); + int (*dma_transfer)(struct dw_spi *dws, int cs_change); +}; + +struct dw_spi { + struct spi_master *master; + struct spi_device *cur_dev; + struct device *parent_dev; + enum dw_ssi_type type; + + void __iomem *regs; + unsigned long paddr; + u32 iolen; + int irq; + u32 fifo_len; /* depth of the FIFO buffer */ + u32 max_freq; /* max bus freq supported */ + + u16 bus_num; + u16 num_cs; /* supported slave numbers */ + + /* Driver message queue */ + struct workqueue_struct *workqueue; + struct work_struct pump_messages; + spinlock_t lock; + struct list_head queue; + int busy; + int run; + + /* Message Transfer pump */ + struct tasklet_struct pump_transfers; + + /* Current message transfer state info */ + struct spi_message *cur_msg; + struct spi_transfer *cur_transfer; + struct chip_data *cur_chip; + struct chip_data *prev_chip; + size_t len; + void *tx; + void *tx_end; + void *rx; + void *rx_end; + int dma_mapped; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + size_t rx_map_len; + size_t tx_map_len; + u8 n_bytes; /* current is a 1/2 bytes op */ + u8 max_bits_per_word; /* maxim is 16b */ + u32 dma_width; + int cs_change; + irqreturn_t (*transfer_handler)(struct dw_spi *dws); + void (*cs_control)(u32 command); + + /* Dma info */ + int dma_inited; + struct dma_chan *txchan; + struct scatterlist tx_sgl; + struct dma_chan *rxchan; + struct scatterlist rx_sgl; + int dma_chan_done; + struct device *dma_dev; + dma_addr_t dma_addr; /* phy address of the Data register */ + struct dw_spi_dma_ops *dma_ops; + void *dma_priv; /* platform relate info */ + struct pci_dev *dmac; + + /* Bus interface info */ + void *priv; +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs; +#endif +}; + +#define dw_readl(dw, name) \ + __raw_readl(&(((struct dw_spi_reg *)dw->regs)->name)) +#define dw_writel(dw, name, val) \ + __raw_writel((val), &(((struct dw_spi_reg *)dw->regs)->name)) +#define dw_readw(dw, name) \ + __raw_readw(&(((struct dw_spi_reg *)dw->regs)->name)) +#define dw_writew(dw, name, val) \ + __raw_writew((val), &(((struct dw_spi_reg *)dw->regs)->name)) + +static inline void spi_enable_chip(struct dw_spi *dws, int enable) +{ + dw_writel(dws, ssienr, (enable ? 1 : 0)); +} + +static inline void spi_set_clk(struct dw_spi *dws, u16 div) +{ + dw_writel(dws, baudr, div); +} + +static inline void spi_chip_sel(struct dw_spi *dws, u16 cs) +{ + if (cs > dws->num_cs) + return; + + if (dws->cs_control) + dws->cs_control(1); + + dw_writel(dws, ser, 1 << cs); +} + +/* Disable IRQ bits */ +static inline void spi_mask_intr(struct dw_spi *dws, u32 mask) +{ + u32 new_mask; + + new_mask = dw_readl(dws, imr) & ~mask; + dw_writel(dws, imr, new_mask); +} + +/* Enable IRQ bits */ +static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) +{ + u32 new_mask; + + new_mask = dw_readl(dws, imr) | mask; + dw_writel(dws, imr, new_mask); +} + +/* + * Each SPI slave device to work with dw_api controller should + * has such a structure claiming its working mode (PIO/DMA etc), + * which can be save in the "controller_data" member of the + * struct spi_device + */ +struct dw_spi_chip { + u8 poll_mode; /* 0 for contoller polling mode */ + u8 type; /* SPI/SSP/Micrwire */ + u8 enable_dma; + void (*cs_control)(u32 command); +}; + +extern int dw_spi_add_host(struct dw_spi *dws); +extern void dw_spi_remove_host(struct dw_spi *dws); +extern int dw_spi_suspend_host(struct dw_spi *dws); +extern int dw_spi_resume_host(struct dw_spi *dws); +extern void dw_spi_xfer_done(struct dw_spi *dws); + +/* platform related setup */ +extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */ +#endif /* DW_SPI_HEADER_H */ diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c new file mode 100644 index 000000000000..d3570071e98f --- /dev/null +++ b/drivers/spi/spi-ep93xx.c @@ -0,0 +1,938 @@ +/* + * Driver for Cirrus Logic EP93xx SPI controller. + * + * Copyright (c) 2010 Mika Westerberg + * + * Explicit FIFO handling code was inspired by amba-pl022 driver. + * + * Chip select support using other than built-in GPIOs by H. Hartley Sweeten. + * + * For more information about the SPI controller see documentation on Cirrus + * Logic web site: + * http://www.cirrus.com/en/pubs/manual/EP93xx_Users_Guide_UM1.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define SSPCR0 0x0000 +#define SSPCR0_MODE_SHIFT 6 +#define SSPCR0_SCR_SHIFT 8 + +#define SSPCR1 0x0004 +#define SSPCR1_RIE BIT(0) +#define SSPCR1_TIE BIT(1) +#define SSPCR1_RORIE BIT(2) +#define SSPCR1_LBM BIT(3) +#define SSPCR1_SSE BIT(4) +#define SSPCR1_MS BIT(5) +#define SSPCR1_SOD BIT(6) + +#define SSPDR 0x0008 + +#define SSPSR 0x000c +#define SSPSR_TFE BIT(0) +#define SSPSR_TNF BIT(1) +#define SSPSR_RNE BIT(2) +#define SSPSR_RFF BIT(3) +#define SSPSR_BSY BIT(4) +#define SSPCPSR 0x0010 + +#define SSPIIR 0x0014 +#define SSPIIR_RIS BIT(0) +#define SSPIIR_TIS BIT(1) +#define SSPIIR_RORIS BIT(2) +#define SSPICR SSPIIR + +/* timeout in milliseconds */ +#define SPI_TIMEOUT 5 +/* maximum depth of RX/TX FIFO */ +#define SPI_FIFO_SIZE 8 + +/** + * struct ep93xx_spi - EP93xx SPI controller structure + * @lock: spinlock that protects concurrent accesses to fields @running, + * @current_msg and @msg_queue + * @pdev: pointer to platform device + * @clk: clock for the controller + * @regs_base: pointer to ioremap()'d registers + * @irq: IRQ number used by the driver + * @min_rate: minimum clock rate (in Hz) supported by the controller + * @max_rate: maximum clock rate (in Hz) supported by the controller + * @running: is the queue running + * @wq: workqueue used by the driver + * @msg_work: work that is queued for the driver + * @wait: wait here until given transfer is completed + * @msg_queue: queue for the messages + * @current_msg: message that is currently processed (or %NULL if none) + * @tx: current byte in transfer to transmit + * @rx: current byte in transfer to receive + * @fifo_level: how full is FIFO (%0..%SPI_FIFO_SIZE - %1). Receiving one + * frame decreases this level and sending one frame increases it. + * + * This structure holds EP93xx SPI controller specific information. When + * @running is %true, driver accepts transfer requests from protocol drivers. + * @current_msg is used to hold pointer to the message that is currently + * processed. If @current_msg is %NULL, it means that no processing is going + * on. + * + * Most of the fields are only written once and they can be accessed without + * taking the @lock. Fields that are accessed concurrently are: @current_msg, + * @running, and @msg_queue. + */ +struct ep93xx_spi { + spinlock_t lock; + const struct platform_device *pdev; + struct clk *clk; + void __iomem *regs_base; + int irq; + unsigned long min_rate; + unsigned long max_rate; + bool running; + struct workqueue_struct *wq; + struct work_struct msg_work; + struct completion wait; + struct list_head msg_queue; + struct spi_message *current_msg; + size_t tx; + size_t rx; + size_t fifo_level; +}; + +/** + * struct ep93xx_spi_chip - SPI device hardware settings + * @spi: back pointer to the SPI device + * @rate: max rate in hz this chip supports + * @div_cpsr: cpsr (pre-scaler) divider + * @div_scr: scr divider + * @dss: bits per word (4 - 16 bits) + * @ops: private chip operations + * + * This structure is used to store hardware register specific settings for each + * SPI device. Settings are written to hardware by function + * ep93xx_spi_chip_setup(). + */ +struct ep93xx_spi_chip { + const struct spi_device *spi; + unsigned long rate; + u8 div_cpsr; + u8 div_scr; + u8 dss; + struct ep93xx_spi_chip_ops *ops; +}; + +/* converts bits per word to CR0.DSS value */ +#define bits_per_word_to_dss(bpw) ((bpw) - 1) + +static inline void +ep93xx_spi_write_u8(const struct ep93xx_spi *espi, u16 reg, u8 value) +{ + __raw_writeb(value, espi->regs_base + reg); +} + +static inline u8 +ep93xx_spi_read_u8(const struct ep93xx_spi *spi, u16 reg) +{ + return __raw_readb(spi->regs_base + reg); +} + +static inline void +ep93xx_spi_write_u16(const struct ep93xx_spi *espi, u16 reg, u16 value) +{ + __raw_writew(value, espi->regs_base + reg); +} + +static inline u16 +ep93xx_spi_read_u16(const struct ep93xx_spi *spi, u16 reg) +{ + return __raw_readw(spi->regs_base + reg); +} + +static int ep93xx_spi_enable(const struct ep93xx_spi *espi) +{ + u8 regval; + int err; + + err = clk_enable(espi->clk); + if (err) + return err; + + regval = ep93xx_spi_read_u8(espi, SSPCR1); + regval |= SSPCR1_SSE; + ep93xx_spi_write_u8(espi, SSPCR1, regval); + + return 0; +} + +static void ep93xx_spi_disable(const struct ep93xx_spi *espi) +{ + u8 regval; + + regval = ep93xx_spi_read_u8(espi, SSPCR1); + regval &= ~SSPCR1_SSE; + ep93xx_spi_write_u8(espi, SSPCR1, regval); + + clk_disable(espi->clk); +} + +static void ep93xx_spi_enable_interrupts(const struct ep93xx_spi *espi) +{ + u8 regval; + + regval = ep93xx_spi_read_u8(espi, SSPCR1); + regval |= (SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE); + ep93xx_spi_write_u8(espi, SSPCR1, regval); +} + +static void ep93xx_spi_disable_interrupts(const struct ep93xx_spi *espi) +{ + u8 regval; + + regval = ep93xx_spi_read_u8(espi, SSPCR1); + regval &= ~(SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE); + ep93xx_spi_write_u8(espi, SSPCR1, regval); +} + +/** + * ep93xx_spi_calc_divisors() - calculates SPI clock divisors + * @espi: ep93xx SPI controller struct + * @chip: divisors are calculated for this chip + * @rate: desired SPI output clock rate + * + * Function calculates cpsr (clock pre-scaler) and scr divisors based on + * given @rate and places them to @chip->div_cpsr and @chip->div_scr. If, + * for some reason, divisors cannot be calculated nothing is stored and + * %-EINVAL is returned. + */ +static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi, + struct ep93xx_spi_chip *chip, + unsigned long rate) +{ + unsigned long spi_clk_rate = clk_get_rate(espi->clk); + int cpsr, scr; + + /* + * Make sure that max value is between values supported by the + * controller. Note that minimum value is already checked in + * ep93xx_spi_transfer(). + */ + rate = clamp(rate, espi->min_rate, espi->max_rate); + + /* + * Calculate divisors so that we can get speed according the + * following formula: + * rate = spi_clock_rate / (cpsr * (1 + scr)) + * + * cpsr must be even number and starts from 2, scr can be any number + * between 0 and 255. + */ + for (cpsr = 2; cpsr <= 254; cpsr += 2) { + for (scr = 0; scr <= 255; scr++) { + if ((spi_clk_rate / (cpsr * (scr + 1))) <= rate) { + chip->div_scr = (u8)scr; + chip->div_cpsr = (u8)cpsr; + return 0; + } + } + } + + return -EINVAL; +} + +static void ep93xx_spi_cs_control(struct spi_device *spi, bool control) +{ + struct ep93xx_spi_chip *chip = spi_get_ctldata(spi); + int value = (spi->mode & SPI_CS_HIGH) ? control : !control; + + if (chip->ops && chip->ops->cs_control) + chip->ops->cs_control(spi, value); +} + +/** + * ep93xx_spi_setup() - setup an SPI device + * @spi: SPI device to setup + * + * This function sets up SPI device mode, speed etc. Can be called multiple + * times for a single device. Returns %0 in case of success, negative error in + * case of failure. When this function returns success, the device is + * deselected. + */ +static int ep93xx_spi_setup(struct spi_device *spi) +{ + struct ep93xx_spi *espi = spi_master_get_devdata(spi->master); + struct ep93xx_spi_chip *chip; + + if (spi->bits_per_word < 4 || spi->bits_per_word > 16) { + dev_err(&espi->pdev->dev, "invalid bits per word %d\n", + spi->bits_per_word); + return -EINVAL; + } + + chip = spi_get_ctldata(spi); + if (!chip) { + dev_dbg(&espi->pdev->dev, "initial setup for %s\n", + spi->modalias); + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->spi = spi; + chip->ops = spi->controller_data; + + if (chip->ops && chip->ops->setup) { + int ret = chip->ops->setup(spi); + if (ret) { + kfree(chip); + return ret; + } + } + + spi_set_ctldata(spi, chip); + } + + if (spi->max_speed_hz != chip->rate) { + int err; + + err = ep93xx_spi_calc_divisors(espi, chip, spi->max_speed_hz); + if (err != 0) { + spi_set_ctldata(spi, NULL); + kfree(chip); + return err; + } + chip->rate = spi->max_speed_hz; + } + + chip->dss = bits_per_word_to_dss(spi->bits_per_word); + + ep93xx_spi_cs_control(spi, false); + return 0; +} + +/** + * ep93xx_spi_transfer() - queue message to be transferred + * @spi: target SPI device + * @msg: message to be transferred + * + * This function is called by SPI device drivers when they are going to transfer + * a new message. It simply puts the message in the queue and schedules + * workqueue to perform the actual transfer later on. + * + * Returns %0 on success and negative error in case of failure. + */ +static int ep93xx_spi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct ep93xx_spi *espi = spi_master_get_devdata(spi->master); + struct spi_transfer *t; + unsigned long flags; + + if (!msg || !msg->complete) + return -EINVAL; + + /* first validate each transfer */ + list_for_each_entry(t, &msg->transfers, transfer_list) { + if (t->bits_per_word) { + if (t->bits_per_word < 4 || t->bits_per_word > 16) + return -EINVAL; + } + if (t->speed_hz && t->speed_hz < espi->min_rate) + return -EINVAL; + } + + /* + * Now that we own the message, let's initialize it so that it is + * suitable for us. We use @msg->status to signal whether there was + * error in transfer and @msg->state is used to hold pointer to the + * current transfer (or %NULL if no active current transfer). + */ + msg->state = NULL; + msg->status = 0; + msg->actual_length = 0; + + spin_lock_irqsave(&espi->lock, flags); + if (!espi->running) { + spin_unlock_irqrestore(&espi->lock, flags); + return -ESHUTDOWN; + } + list_add_tail(&msg->queue, &espi->msg_queue); + queue_work(espi->wq, &espi->msg_work); + spin_unlock_irqrestore(&espi->lock, flags); + + return 0; +} + +/** + * ep93xx_spi_cleanup() - cleans up master controller specific state + * @spi: SPI device to cleanup + * + * This function releases master controller specific state for given @spi + * device. + */ +static void ep93xx_spi_cleanup(struct spi_device *spi) +{ + struct ep93xx_spi_chip *chip; + + chip = spi_get_ctldata(spi); + if (chip) { + if (chip->ops && chip->ops->cleanup) + chip->ops->cleanup(spi); + spi_set_ctldata(spi, NULL); + kfree(chip); + } +} + +/** + * ep93xx_spi_chip_setup() - configures hardware according to given @chip + * @espi: ep93xx SPI controller struct + * @chip: chip specific settings + * + * This function sets up the actual hardware registers with settings given in + * @chip. Note that no validation is done so make sure that callers validate + * settings before calling this. + */ +static void ep93xx_spi_chip_setup(const struct ep93xx_spi *espi, + const struct ep93xx_spi_chip *chip) +{ + u16 cr0; + + cr0 = chip->div_scr << SSPCR0_SCR_SHIFT; + cr0 |= (chip->spi->mode & (SPI_CPHA|SPI_CPOL)) << SSPCR0_MODE_SHIFT; + cr0 |= chip->dss; + + dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n", + chip->spi->mode, chip->div_cpsr, chip->div_scr, chip->dss); + dev_dbg(&espi->pdev->dev, "setup: cr0 %#x", cr0); + + ep93xx_spi_write_u8(espi, SSPCPSR, chip->div_cpsr); + ep93xx_spi_write_u16(espi, SSPCR0, cr0); +} + +static inline int bits_per_word(const struct ep93xx_spi *espi) +{ + struct spi_message *msg = espi->current_msg; + struct spi_transfer *t = msg->state; + + return t->bits_per_word ? t->bits_per_word : msg->spi->bits_per_word; +} + +static void ep93xx_do_write(struct ep93xx_spi *espi, struct spi_transfer *t) +{ + if (bits_per_word(espi) > 8) { + u16 tx_val = 0; + + if (t->tx_buf) + tx_val = ((u16 *)t->tx_buf)[espi->tx]; + ep93xx_spi_write_u16(espi, SSPDR, tx_val); + espi->tx += sizeof(tx_val); + } else { + u8 tx_val = 0; + + if (t->tx_buf) + tx_val = ((u8 *)t->tx_buf)[espi->tx]; + ep93xx_spi_write_u8(espi, SSPDR, tx_val); + espi->tx += sizeof(tx_val); + } +} + +static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t) +{ + if (bits_per_word(espi) > 8) { + u16 rx_val; + + rx_val = ep93xx_spi_read_u16(espi, SSPDR); + if (t->rx_buf) + ((u16 *)t->rx_buf)[espi->rx] = rx_val; + espi->rx += sizeof(rx_val); + } else { + u8 rx_val; + + rx_val = ep93xx_spi_read_u8(espi, SSPDR); + if (t->rx_buf) + ((u8 *)t->rx_buf)[espi->rx] = rx_val; + espi->rx += sizeof(rx_val); + } +} + +/** + * ep93xx_spi_read_write() - perform next RX/TX transfer + * @espi: ep93xx SPI controller struct + * + * This function transfers next bytes (or half-words) to/from RX/TX FIFOs. If + * called several times, the whole transfer will be completed. Returns + * %-EINPROGRESS when current transfer was not yet completed otherwise %0. + * + * When this function is finished, RX FIFO should be empty and TX FIFO should be + * full. + */ +static int ep93xx_spi_read_write(struct ep93xx_spi *espi) +{ + struct spi_message *msg = espi->current_msg; + struct spi_transfer *t = msg->state; + + /* read as long as RX FIFO has frames in it */ + while ((ep93xx_spi_read_u8(espi, SSPSR) & SSPSR_RNE)) { + ep93xx_do_read(espi, t); + espi->fifo_level--; + } + + /* write as long as TX FIFO has room */ + while (espi->fifo_level < SPI_FIFO_SIZE && espi->tx < t->len) { + ep93xx_do_write(espi, t); + espi->fifo_level++; + } + + if (espi->rx == t->len) { + msg->actual_length += t->len; + return 0; + } + + return -EINPROGRESS; +} + +/** + * ep93xx_spi_process_transfer() - processes one SPI transfer + * @espi: ep93xx SPI controller struct + * @msg: current message + * @t: transfer to process + * + * This function processes one SPI transfer given in @t. Function waits until + * transfer is complete (may sleep) and updates @msg->status based on whether + * transfer was successfully processed or not. + */ +static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, + struct spi_message *msg, + struct spi_transfer *t) +{ + struct ep93xx_spi_chip *chip = spi_get_ctldata(msg->spi); + + msg->state = t; + + /* + * Handle any transfer specific settings if needed. We use + * temporary chip settings here and restore original later when + * the transfer is finished. + */ + if (t->speed_hz || t->bits_per_word) { + struct ep93xx_spi_chip tmp_chip = *chip; + + if (t->speed_hz) { + int err; + + err = ep93xx_spi_calc_divisors(espi, &tmp_chip, + t->speed_hz); + if (err) { + dev_err(&espi->pdev->dev, + "failed to adjust speed\n"); + msg->status = err; + return; + } + } + + if (t->bits_per_word) + tmp_chip.dss = bits_per_word_to_dss(t->bits_per_word); + + /* + * Set up temporary new hw settings for this transfer. + */ + ep93xx_spi_chip_setup(espi, &tmp_chip); + } + + espi->rx = 0; + espi->tx = 0; + + /* + * Now everything is set up for the current transfer. We prime the TX + * FIFO, enable interrupts, and wait for the transfer to complete. + */ + if (ep93xx_spi_read_write(espi)) { + ep93xx_spi_enable_interrupts(espi); + wait_for_completion(&espi->wait); + } + + /* + * In case of error during transmit, we bail out from processing + * the message. + */ + if (msg->status) + return; + + /* + * After this transfer is finished, perform any possible + * post-transfer actions requested by the protocol driver. + */ + if (t->delay_usecs) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(usecs_to_jiffies(t->delay_usecs)); + } + if (t->cs_change) { + if (!list_is_last(&t->transfer_list, &msg->transfers)) { + /* + * In case protocol driver is asking us to drop the + * chipselect briefly, we let the scheduler to handle + * any "delay" here. + */ + ep93xx_spi_cs_control(msg->spi, false); + cond_resched(); + ep93xx_spi_cs_control(msg->spi, true); + } + } + + if (t->speed_hz || t->bits_per_word) + ep93xx_spi_chip_setup(espi, chip); +} + +/* + * ep93xx_spi_process_message() - process one SPI message + * @espi: ep93xx SPI controller struct + * @msg: message to process + * + * This function processes a single SPI message. We go through all transfers in + * the message and pass them to ep93xx_spi_process_transfer(). Chipselect is + * asserted during the whole message (unless per transfer cs_change is set). + * + * @msg->status contains %0 in case of success or negative error code in case of + * failure. + */ +static void ep93xx_spi_process_message(struct ep93xx_spi *espi, + struct spi_message *msg) +{ + unsigned long timeout; + struct spi_transfer *t; + int err; + + /* + * Enable the SPI controller and its clock. + */ + err = ep93xx_spi_enable(espi); + if (err) { + dev_err(&espi->pdev->dev, "failed to enable SPI controller\n"); + msg->status = err; + return; + } + + /* + * Just to be sure: flush any data from RX FIFO. + */ + timeout = jiffies + msecs_to_jiffies(SPI_TIMEOUT); + while (ep93xx_spi_read_u16(espi, SSPSR) & SSPSR_RNE) { + if (time_after(jiffies, timeout)) { + dev_warn(&espi->pdev->dev, + "timeout while flushing RX FIFO\n"); + msg->status = -ETIMEDOUT; + return; + } + ep93xx_spi_read_u16(espi, SSPDR); + } + + /* + * We explicitly handle FIFO level. This way we don't have to check TX + * FIFO status using %SSPSR_TNF bit which may cause RX FIFO overruns. + */ + espi->fifo_level = 0; + + /* + * Update SPI controller registers according to spi device and assert + * the chipselect. + */ + ep93xx_spi_chip_setup(espi, spi_get_ctldata(msg->spi)); + ep93xx_spi_cs_control(msg->spi, true); + + list_for_each_entry(t, &msg->transfers, transfer_list) { + ep93xx_spi_process_transfer(espi, msg, t); + if (msg->status) + break; + } + + /* + * Now the whole message is transferred (or failed for some reason). We + * deselect the device and disable the SPI controller. + */ + ep93xx_spi_cs_control(msg->spi, false); + ep93xx_spi_disable(espi); +} + +#define work_to_espi(work) (container_of((work), struct ep93xx_spi, msg_work)) + +/** + * ep93xx_spi_work() - EP93xx SPI workqueue worker function + * @work: work struct + * + * Workqueue worker function. This function is called when there are new + * SPI messages to be processed. Message is taken out from the queue and then + * passed to ep93xx_spi_process_message(). + * + * After message is transferred, protocol driver is notified by calling + * @msg->complete(). In case of error, @msg->status is set to negative error + * number, otherwise it contains zero (and @msg->actual_length is updated). + */ +static void ep93xx_spi_work(struct work_struct *work) +{ + struct ep93xx_spi *espi = work_to_espi(work); + struct spi_message *msg; + + spin_lock_irq(&espi->lock); + if (!espi->running || espi->current_msg || + list_empty(&espi->msg_queue)) { + spin_unlock_irq(&espi->lock); + return; + } + msg = list_first_entry(&espi->msg_queue, struct spi_message, queue); + list_del_init(&msg->queue); + espi->current_msg = msg; + spin_unlock_irq(&espi->lock); + + ep93xx_spi_process_message(espi, msg); + + /* + * Update the current message and re-schedule ourselves if there are + * more messages in the queue. + */ + spin_lock_irq(&espi->lock); + espi->current_msg = NULL; + if (espi->running && !list_empty(&espi->msg_queue)) + queue_work(espi->wq, &espi->msg_work); + spin_unlock_irq(&espi->lock); + + /* notify the protocol driver that we are done with this message */ + msg->complete(msg->context); +} + +static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id) +{ + struct ep93xx_spi *espi = dev_id; + u8 irq_status = ep93xx_spi_read_u8(espi, SSPIIR); + + /* + * If we got ROR (receive overrun) interrupt we know that something is + * wrong. Just abort the message. + */ + if (unlikely(irq_status & SSPIIR_RORIS)) { + /* clear the overrun interrupt */ + ep93xx_spi_write_u8(espi, SSPICR, 0); + dev_warn(&espi->pdev->dev, + "receive overrun, aborting the message\n"); + espi->current_msg->status = -EIO; + } else { + /* + * Interrupt is either RX (RIS) or TX (TIS). For both cases we + * simply execute next data transfer. + */ + if (ep93xx_spi_read_write(espi)) { + /* + * In normal case, there still is some processing left + * for current transfer. Let's wait for the next + * interrupt then. + */ + return IRQ_HANDLED; + } + } + + /* + * Current transfer is finished, either with error or with success. In + * any case we disable interrupts and notify the worker to handle + * any post-processing of the message. + */ + ep93xx_spi_disable_interrupts(espi); + complete(&espi->wait); + return IRQ_HANDLED; +} + +static int __init ep93xx_spi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct ep93xx_spi_info *info; + struct ep93xx_spi *espi; + struct resource *res; + int error; + + info = pdev->dev.platform_data; + + master = spi_alloc_master(&pdev->dev, sizeof(*espi)); + if (!master) { + dev_err(&pdev->dev, "failed to allocate spi master\n"); + return -ENOMEM; + } + + master->setup = ep93xx_spi_setup; + master->transfer = ep93xx_spi_transfer; + master->cleanup = ep93xx_spi_cleanup; + master->bus_num = pdev->id; + master->num_chipselect = info->num_chipselect; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + platform_set_drvdata(pdev, master); + + espi = spi_master_get_devdata(master); + + espi->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(espi->clk)) { + dev_err(&pdev->dev, "unable to get spi clock\n"); + error = PTR_ERR(espi->clk); + goto fail_release_master; + } + + spin_lock_init(&espi->lock); + init_completion(&espi->wait); + + /* + * Calculate maximum and minimum supported clock rates + * for the controller. + */ + espi->max_rate = clk_get_rate(espi->clk) / 2; + espi->min_rate = clk_get_rate(espi->clk) / (254 * 256); + espi->pdev = pdev; + + espi->irq = platform_get_irq(pdev, 0); + if (espi->irq < 0) { + error = -EBUSY; + dev_err(&pdev->dev, "failed to get irq resources\n"); + goto fail_put_clock; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "unable to get iomem resource\n"); + error = -ENODEV; + goto fail_put_clock; + } + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + dev_err(&pdev->dev, "unable to request iomem resources\n"); + error = -EBUSY; + goto fail_put_clock; + } + + espi->regs_base = ioremap(res->start, resource_size(res)); + if (!espi->regs_base) { + dev_err(&pdev->dev, "failed to map resources\n"); + error = -ENODEV; + goto fail_free_mem; + } + + error = request_irq(espi->irq, ep93xx_spi_interrupt, 0, + "ep93xx-spi", espi); + if (error) { + dev_err(&pdev->dev, "failed to request irq\n"); + goto fail_unmap_regs; + } + + espi->wq = create_singlethread_workqueue("ep93xx_spid"); + if (!espi->wq) { + dev_err(&pdev->dev, "unable to create workqueue\n"); + goto fail_free_irq; + } + INIT_WORK(&espi->msg_work, ep93xx_spi_work); + INIT_LIST_HEAD(&espi->msg_queue); + espi->running = true; + + /* make sure that the hardware is disabled */ + ep93xx_spi_write_u8(espi, SSPCR1, 0); + + error = spi_register_master(master); + if (error) { + dev_err(&pdev->dev, "failed to register SPI master\n"); + goto fail_free_queue; + } + + dev_info(&pdev->dev, "EP93xx SPI Controller at 0x%08lx irq %d\n", + (unsigned long)res->start, espi->irq); + + return 0; + +fail_free_queue: + destroy_workqueue(espi->wq); +fail_free_irq: + free_irq(espi->irq, espi); +fail_unmap_regs: + iounmap(espi->regs_base); +fail_free_mem: + release_mem_region(res->start, resource_size(res)); +fail_put_clock: + clk_put(espi->clk); +fail_release_master: + spi_master_put(master); + platform_set_drvdata(pdev, NULL); + + return error; +} + +static int __exit ep93xx_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct ep93xx_spi *espi = spi_master_get_devdata(master); + struct resource *res; + + spin_lock_irq(&espi->lock); + espi->running = false; + spin_unlock_irq(&espi->lock); + + destroy_workqueue(espi->wq); + + /* + * Complete remaining messages with %-ESHUTDOWN status. + */ + spin_lock_irq(&espi->lock); + while (!list_empty(&espi->msg_queue)) { + struct spi_message *msg; + + msg = list_first_entry(&espi->msg_queue, + struct spi_message, queue); + list_del_init(&msg->queue); + msg->status = -ESHUTDOWN; + spin_unlock_irq(&espi->lock); + msg->complete(msg->context); + spin_lock_irq(&espi->lock); + } + spin_unlock_irq(&espi->lock); + + free_irq(espi->irq, espi); + iounmap(espi->regs_base); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + clk_put(espi->clk); + platform_set_drvdata(pdev, NULL); + + spi_unregister_master(master); + return 0; +} + +static struct platform_driver ep93xx_spi_driver = { + .driver = { + .name = "ep93xx-spi", + .owner = THIS_MODULE, + }, + .remove = __exit_p(ep93xx_spi_remove), +}; + +static int __init ep93xx_spi_init(void) +{ + return platform_driver_probe(&ep93xx_spi_driver, ep93xx_spi_probe); +} +module_init(ep93xx_spi_init); + +static void __exit ep93xx_spi_exit(void) +{ + platform_driver_unregister(&ep93xx_spi_driver); +} +module_exit(ep93xx_spi_exit); + +MODULE_DESCRIPTION("EP93xx SPI Controller driver"); +MODULE_AUTHOR("Mika Westerberg "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ep93xx-spi"); diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c new file mode 100644 index 000000000000..54e499d5f92c --- /dev/null +++ b/drivers/spi/spi-fsl-espi.c @@ -0,0 +1,762 @@ +/* + * Freescale eSPI controller driver. + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "spi-fsl-lib.h" + +/* eSPI Controller registers */ +struct fsl_espi_reg { + __be32 mode; /* 0x000 - eSPI mode register */ + __be32 event; /* 0x004 - eSPI event register */ + __be32 mask; /* 0x008 - eSPI mask register */ + __be32 command; /* 0x00c - eSPI command register */ + __be32 transmit; /* 0x010 - eSPI transmit FIFO access register*/ + __be32 receive; /* 0x014 - eSPI receive FIFO access register*/ + u8 res[8]; /* 0x018 - 0x01c reserved */ + __be32 csmode[4]; /* 0x020 - 0x02c eSPI cs mode register */ +}; + +struct fsl_espi_transfer { + const void *tx_buf; + void *rx_buf; + unsigned len; + unsigned n_tx; + unsigned n_rx; + unsigned actual_length; + int status; +}; + +/* eSPI Controller mode register definitions */ +#define SPMODE_ENABLE (1 << 31) +#define SPMODE_LOOP (1 << 30) +#define SPMODE_TXTHR(x) ((x) << 8) +#define SPMODE_RXTHR(x) ((x) << 0) + +/* eSPI Controller CS mode register definitions */ +#define CSMODE_CI_INACTIVEHIGH (1 << 31) +#define CSMODE_CP_BEGIN_EDGECLK (1 << 30) +#define CSMODE_REV (1 << 29) +#define CSMODE_DIV16 (1 << 28) +#define CSMODE_PM(x) ((x) << 24) +#define CSMODE_POL_1 (1 << 20) +#define CSMODE_LEN(x) ((x) << 16) +#define CSMODE_BEF(x) ((x) << 12) +#define CSMODE_AFT(x) ((x) << 8) +#define CSMODE_CG(x) ((x) << 3) + +/* Default mode/csmode for eSPI controller */ +#define SPMODE_INIT_VAL (SPMODE_TXTHR(4) | SPMODE_RXTHR(3)) +#define CSMODE_INIT_VAL (CSMODE_POL_1 | CSMODE_BEF(0) \ + | CSMODE_AFT(0) | CSMODE_CG(1)) + +/* SPIE register values */ +#define SPIE_NE 0x00000200 /* Not empty */ +#define SPIE_NF 0x00000100 /* Not full */ + +/* SPIM register values */ +#define SPIM_NE 0x00000200 /* Not empty */ +#define SPIM_NF 0x00000100 /* Not full */ +#define SPIE_RXCNT(reg) ((reg >> 24) & 0x3F) +#define SPIE_TXCNT(reg) ((reg >> 16) & 0x3F) + +/* SPCOM register values */ +#define SPCOM_CS(x) ((x) << 30) +#define SPCOM_TRANLEN(x) ((x) << 0) +#define SPCOM_TRANLEN_MAX 0xFFFF /* Max transaction length */ + +static void fsl_espi_change_mode(struct spi_device *spi) +{ + struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); + struct spi_mpc8xxx_cs *cs = spi->controller_state; + struct fsl_espi_reg *reg_base = mspi->reg_base; + __be32 __iomem *mode = ®_base->csmode[spi->chip_select]; + __be32 __iomem *espi_mode = ®_base->mode; + u32 tmp; + unsigned long flags; + + /* Turn off IRQs locally to minimize time that SPI is disabled. */ + local_irq_save(flags); + + /* Turn off SPI unit prior changing mode */ + tmp = mpc8xxx_spi_read_reg(espi_mode); + mpc8xxx_spi_write_reg(espi_mode, tmp & ~SPMODE_ENABLE); + mpc8xxx_spi_write_reg(mode, cs->hw_mode); + mpc8xxx_spi_write_reg(espi_mode, tmp); + + local_irq_restore(flags); +} + +static u32 fsl_espi_tx_buf_lsb(struct mpc8xxx_spi *mpc8xxx_spi) +{ + u32 data; + u16 data_h; + u16 data_l; + const u32 *tx = mpc8xxx_spi->tx; + + if (!tx) + return 0; + + data = *tx++ << mpc8xxx_spi->tx_shift; + data_l = data & 0xffff; + data_h = (data >> 16) & 0xffff; + swab16s(&data_l); + swab16s(&data_h); + data = data_h | data_l; + + mpc8xxx_spi->tx = tx; + return data; +} + +static int fsl_espi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + int bits_per_word = 0; + u8 pm; + u32 hz = 0; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + if (t) { + bits_per_word = t->bits_per_word; + hz = t->speed_hz; + } + + /* spi_transfer level calls that work per-word */ + if (!bits_per_word) + bits_per_word = spi->bits_per_word; + + /* Make sure its a bit width we support [4..16] */ + if ((bits_per_word < 4) || (bits_per_word > 16)) + return -EINVAL; + + if (!hz) + hz = spi->max_speed_hz; + + cs->rx_shift = 0; + cs->tx_shift = 0; + cs->get_rx = mpc8xxx_spi_rx_buf_u32; + cs->get_tx = mpc8xxx_spi_tx_buf_u32; + if (bits_per_word <= 8) { + cs->rx_shift = 8 - bits_per_word; + } else if (bits_per_word <= 16) { + cs->rx_shift = 16 - bits_per_word; + if (spi->mode & SPI_LSB_FIRST) + cs->get_tx = fsl_espi_tx_buf_lsb; + } else { + return -EINVAL; + } + + mpc8xxx_spi->rx_shift = cs->rx_shift; + mpc8xxx_spi->tx_shift = cs->tx_shift; + mpc8xxx_spi->get_rx = cs->get_rx; + mpc8xxx_spi->get_tx = cs->get_tx; + + bits_per_word = bits_per_word - 1; + + /* mask out bits we are going to set */ + cs->hw_mode &= ~(CSMODE_LEN(0xF) | CSMODE_DIV16 | CSMODE_PM(0xF)); + + cs->hw_mode |= CSMODE_LEN(bits_per_word); + + if ((mpc8xxx_spi->spibrg / hz) > 64) { + cs->hw_mode |= CSMODE_DIV16; + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1; + + WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " + "Will use %d Hz instead.\n", dev_name(&spi->dev), + hz, mpc8xxx_spi->spibrg / 1024); + if (pm > 16) + pm = 16; + } else { + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; + } + if (pm) + pm--; + + cs->hw_mode |= CSMODE_PM(pm); + + fsl_espi_change_mode(spi); + return 0; +} + +static int fsl_espi_cpu_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, + unsigned int len) +{ + u32 word; + struct fsl_espi_reg *reg_base = mspi->reg_base; + + mspi->count = len; + + /* enable rx ints */ + mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE); + + /* transmit word */ + word = mspi->get_tx(mspi); + mpc8xxx_spi_write_reg(®_base->transmit, word); + + return 0; +} + +static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + struct fsl_espi_reg *reg_base = mpc8xxx_spi->reg_base; + unsigned int len = t->len; + u8 bits_per_word; + int ret; + + bits_per_word = spi->bits_per_word; + if (t->bits_per_word) + bits_per_word = t->bits_per_word; + + mpc8xxx_spi->len = t->len; + len = roundup(len, 4) / 4; + + mpc8xxx_spi->tx = t->tx_buf; + mpc8xxx_spi->rx = t->rx_buf; + + INIT_COMPLETION(mpc8xxx_spi->done); + + /* Set SPCOM[CS] and SPCOM[TRANLEN] field */ + if ((t->len - 1) > SPCOM_TRANLEN_MAX) { + dev_err(mpc8xxx_spi->dev, "Transaction length (%d)" + " beyond the SPCOM[TRANLEN] field\n", t->len); + return -EINVAL; + } + mpc8xxx_spi_write_reg(®_base->command, + (SPCOM_CS(spi->chip_select) | SPCOM_TRANLEN(t->len - 1))); + + ret = fsl_espi_cpu_bufs(mpc8xxx_spi, t, len); + if (ret) + return ret; + + wait_for_completion(&mpc8xxx_spi->done); + + /* disable rx ints */ + mpc8xxx_spi_write_reg(®_base->mask, 0); + + return mpc8xxx_spi->count; +} + +static inline void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd) +{ + if (cmd) { + cmd[1] = (u8)(addr >> 16); + cmd[2] = (u8)(addr >> 8); + cmd[3] = (u8)(addr >> 0); + } +} + +static inline unsigned int fsl_espi_cmd2addr(u8 *cmd) +{ + if (cmd) + return cmd[1] << 16 | cmd[2] << 8 | cmd[3] << 0; + + return 0; +} + +static void fsl_espi_do_trans(struct spi_message *m, + struct fsl_espi_transfer *tr) +{ + struct spi_device *spi = m->spi; + struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); + struct fsl_espi_transfer *espi_trans = tr; + struct spi_message message; + struct spi_transfer *t, *first, trans; + int status = 0; + + spi_message_init(&message); + memset(&trans, 0, sizeof(trans)); + + first = list_first_entry(&m->transfers, struct spi_transfer, + transfer_list); + list_for_each_entry(t, &m->transfers, transfer_list) { + if ((first->bits_per_word != t->bits_per_word) || + (first->speed_hz != t->speed_hz)) { + espi_trans->status = -EINVAL; + dev_err(mspi->dev, "bits_per_word/speed_hz should be" + " same for the same SPI transfer\n"); + return; + } + + trans.speed_hz = t->speed_hz; + trans.bits_per_word = t->bits_per_word; + trans.delay_usecs = max(first->delay_usecs, t->delay_usecs); + } + + trans.len = espi_trans->len; + trans.tx_buf = espi_trans->tx_buf; + trans.rx_buf = espi_trans->rx_buf; + spi_message_add_tail(&trans, &message); + + list_for_each_entry(t, &message.transfers, transfer_list) { + if (t->bits_per_word || t->speed_hz) { + status = -EINVAL; + + status = fsl_espi_setup_transfer(spi, t); + if (status < 0) + break; + } + + if (t->len) + status = fsl_espi_bufs(spi, t); + + if (status) { + status = -EMSGSIZE; + break; + } + + if (t->delay_usecs) + udelay(t->delay_usecs); + } + + espi_trans->status = status; + fsl_espi_setup_transfer(spi, NULL); +} + +static void fsl_espi_cmd_trans(struct spi_message *m, + struct fsl_espi_transfer *trans, u8 *rx_buff) +{ + struct spi_transfer *t; + u8 *local_buf; + int i = 0; + struct fsl_espi_transfer *espi_trans = trans; + + local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); + if (!local_buf) { + espi_trans->status = -ENOMEM; + return; + } + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf) { + memcpy(local_buf + i, t->tx_buf, t->len); + i += t->len; + } + } + + espi_trans->tx_buf = local_buf; + espi_trans->rx_buf = local_buf + espi_trans->n_tx; + fsl_espi_do_trans(m, espi_trans); + + espi_trans->actual_length = espi_trans->len; + kfree(local_buf); +} + +static void fsl_espi_rw_trans(struct spi_message *m, + struct fsl_espi_transfer *trans, u8 *rx_buff) +{ + struct fsl_espi_transfer *espi_trans = trans; + unsigned int n_tx = espi_trans->n_tx; + unsigned int n_rx = espi_trans->n_rx; + struct spi_transfer *t; + u8 *local_buf; + u8 *rx_buf = rx_buff; + unsigned int trans_len; + unsigned int addr; + int i, pos, loop; + + local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); + if (!local_buf) { + espi_trans->status = -ENOMEM; + return; + } + + for (pos = 0, loop = 0; pos < n_rx; pos += trans_len, loop++) { + trans_len = n_rx - pos; + if (trans_len > SPCOM_TRANLEN_MAX - n_tx) + trans_len = SPCOM_TRANLEN_MAX - n_tx; + + i = 0; + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf) { + memcpy(local_buf + i, t->tx_buf, t->len); + i += t->len; + } + } + + if (pos > 0) { + addr = fsl_espi_cmd2addr(local_buf); + addr += pos; + fsl_espi_addr2cmd(addr, local_buf); + } + + espi_trans->n_tx = n_tx; + espi_trans->n_rx = trans_len; + espi_trans->len = trans_len + n_tx; + espi_trans->tx_buf = local_buf; + espi_trans->rx_buf = local_buf + n_tx; + fsl_espi_do_trans(m, espi_trans); + + memcpy(rx_buf + pos, espi_trans->rx_buf + n_tx, trans_len); + + if (loop > 0) + espi_trans->actual_length += espi_trans->len - n_tx; + else + espi_trans->actual_length += espi_trans->len; + } + + kfree(local_buf); +} + +static void fsl_espi_do_one_msg(struct spi_message *m) +{ + struct spi_transfer *t; + u8 *rx_buf = NULL; + unsigned int n_tx = 0; + unsigned int n_rx = 0; + struct fsl_espi_transfer espi_trans; + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf) + n_tx += t->len; + if (t->rx_buf) { + n_rx += t->len; + rx_buf = t->rx_buf; + } + } + + espi_trans.n_tx = n_tx; + espi_trans.n_rx = n_rx; + espi_trans.len = n_tx + n_rx; + espi_trans.actual_length = 0; + espi_trans.status = 0; + + if (!rx_buf) + fsl_espi_cmd_trans(m, &espi_trans, NULL); + else + fsl_espi_rw_trans(m, &espi_trans, rx_buf); + + m->actual_length = espi_trans.actual_length; + m->status = espi_trans.status; + m->complete(m->context); +} + +static int fsl_espi_setup(struct spi_device *spi) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_espi_reg *reg_base; + int retval; + u32 hw_mode; + u32 loop_mode; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + if (!spi->max_speed_hz) + return -EINVAL; + + if (!cs) { + cs = kzalloc(sizeof *cs, GFP_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + + mpc8xxx_spi = spi_master_get_devdata(spi->master); + reg_base = mpc8xxx_spi->reg_base; + + hw_mode = cs->hw_mode; /* Save original settings */ + cs->hw_mode = mpc8xxx_spi_read_reg( + ®_base->csmode[spi->chip_select]); + /* mask out bits we are going to set */ + cs->hw_mode &= ~(CSMODE_CP_BEGIN_EDGECLK | CSMODE_CI_INACTIVEHIGH + | CSMODE_REV); + + if (spi->mode & SPI_CPHA) + cs->hw_mode |= CSMODE_CP_BEGIN_EDGECLK; + if (spi->mode & SPI_CPOL) + cs->hw_mode |= CSMODE_CI_INACTIVEHIGH; + if (!(spi->mode & SPI_LSB_FIRST)) + cs->hw_mode |= CSMODE_REV; + + /* Handle the loop mode */ + loop_mode = mpc8xxx_spi_read_reg(®_base->mode); + loop_mode &= ~SPMODE_LOOP; + if (spi->mode & SPI_LOOP) + loop_mode |= SPMODE_LOOP; + mpc8xxx_spi_write_reg(®_base->mode, loop_mode); + + retval = fsl_espi_setup_transfer(spi, NULL); + if (retval < 0) { + cs->hw_mode = hw_mode; /* Restore settings */ + return retval; + } + return 0; +} + +void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) +{ + struct fsl_espi_reg *reg_base = mspi->reg_base; + + /* We need handle RX first */ + if (events & SPIE_NE) { + u32 rx_data, tmp; + u8 rx_data_8; + + /* Spin until RX is done */ + while (SPIE_RXCNT(events) < min(4, mspi->len)) { + cpu_relax(); + events = mpc8xxx_spi_read_reg(®_base->event); + } + + if (mspi->len >= 4) { + rx_data = mpc8xxx_spi_read_reg(®_base->receive); + } else { + tmp = mspi->len; + rx_data = 0; + while (tmp--) { + rx_data_8 = in_8((u8 *)®_base->receive); + rx_data |= (rx_data_8 << (tmp * 8)); + } + + rx_data <<= (4 - mspi->len) * 8; + } + + mspi->len -= 4; + + if (mspi->rx) + mspi->get_rx(rx_data, mspi); + } + + if (!(events & SPIE_NF)) { + int ret; + + /* spin until TX is done */ + ret = spin_event_timeout(((events = mpc8xxx_spi_read_reg( + ®_base->event)) & SPIE_NF) == 0, 1000, 0); + if (!ret) { + dev_err(mspi->dev, "tired waiting for SPIE_NF\n"); + return; + } + } + + /* Clear the events */ + mpc8xxx_spi_write_reg(®_base->event, events); + + mspi->count -= 1; + if (mspi->count) { + u32 word = mspi->get_tx(mspi); + + mpc8xxx_spi_write_reg(®_base->transmit, word); + } else { + complete(&mspi->done); + } +} + +static irqreturn_t fsl_espi_irq(s32 irq, void *context_data) +{ + struct mpc8xxx_spi *mspi = context_data; + struct fsl_espi_reg *reg_base = mspi->reg_base; + irqreturn_t ret = IRQ_NONE; + u32 events; + + /* Get interrupt events(tx/rx) */ + events = mpc8xxx_spi_read_reg(®_base->event); + if (events) + ret = IRQ_HANDLED; + + dev_vdbg(mspi->dev, "%s: events %x\n", __func__, events); + + fsl_espi_cpu_irq(mspi, events); + + return ret; +} + +static void fsl_espi_remove(struct mpc8xxx_spi *mspi) +{ + iounmap(mspi->reg_base); +} + +static struct spi_master * __devinit fsl_espi_probe(struct device *dev, + struct resource *mem, unsigned int irq) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct spi_master *master; + struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_espi_reg *reg_base; + u32 regval; + int i, ret = 0; + + master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi)); + if (!master) { + ret = -ENOMEM; + goto err; + } + + dev_set_drvdata(dev, master); + + ret = mpc8xxx_spi_probe(dev, mem, irq); + if (ret) + goto err_probe; + + master->setup = fsl_espi_setup; + + mpc8xxx_spi = spi_master_get_devdata(master); + mpc8xxx_spi->spi_do_one_msg = fsl_espi_do_one_msg; + mpc8xxx_spi->spi_remove = fsl_espi_remove; + + mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem)); + if (!mpc8xxx_spi->reg_base) { + ret = -ENOMEM; + goto err_probe; + } + + reg_base = mpc8xxx_spi->reg_base; + + /* Register for SPI Interrupt */ + ret = request_irq(mpc8xxx_spi->irq, fsl_espi_irq, + 0, "fsl_espi", mpc8xxx_spi); + if (ret) + goto free_irq; + + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { + mpc8xxx_spi->rx_shift = 16; + mpc8xxx_spi->tx_shift = 24; + } + + /* SPI controller initializations */ + mpc8xxx_spi_write_reg(®_base->mode, 0); + mpc8xxx_spi_write_reg(®_base->mask, 0); + mpc8xxx_spi_write_reg(®_base->command, 0); + mpc8xxx_spi_write_reg(®_base->event, 0xffffffff); + + /* Init eSPI CS mode register */ + for (i = 0; i < pdata->max_chipselect; i++) + mpc8xxx_spi_write_reg(®_base->csmode[i], CSMODE_INIT_VAL); + + /* Enable SPI interface */ + regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; + + mpc8xxx_spi_write_reg(®_base->mode, regval); + + ret = spi_register_master(master); + if (ret < 0) + goto unreg_master; + + dev_info(dev, "at 0x%p (irq = %d)\n", reg_base, mpc8xxx_spi->irq); + + return master; + +unreg_master: + free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); +free_irq: + iounmap(mpc8xxx_spi->reg_base); +err_probe: + spi_master_put(master); +err: + return ERR_PTR(ret); +} + +static int of_fsl_espi_get_chipselects(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct fsl_spi_platform_data *pdata = dev->platform_data; + const u32 *prop; + int len; + + prop = of_get_property(np, "fsl,espi-num-chipselects", &len); + if (!prop || len < sizeof(*prop)) { + dev_err(dev, "No 'fsl,espi-num-chipselects' property\n"); + return -EINVAL; + } + + pdata->max_chipselect = *prop; + pdata->cs_control = NULL; + + return 0; +} + +static int __devinit of_fsl_espi_probe(struct platform_device *ofdev) +{ + struct device *dev = &ofdev->dev; + struct device_node *np = ofdev->dev.of_node; + struct spi_master *master; + struct resource mem; + struct resource irq; + int ret = -ENOMEM; + + ret = of_mpc8xxx_spi_probe(ofdev); + if (ret) + return ret; + + ret = of_fsl_espi_get_chipselects(dev); + if (ret) + goto err; + + ret = of_address_to_resource(np, 0, &mem); + if (ret) + goto err; + + ret = of_irq_to_resource(np, 0, &irq); + if (!ret) { + ret = -EINVAL; + goto err; + } + + master = fsl_espi_probe(dev, &mem, irq.start); + if (IS_ERR(master)) { + ret = PTR_ERR(master); + goto err; + } + + return 0; + +err: + return ret; +} + +static int __devexit of_fsl_espi_remove(struct platform_device *dev) +{ + return mpc8xxx_spi_remove(&dev->dev); +} + +static const struct of_device_id of_fsl_espi_match[] = { + { .compatible = "fsl,mpc8536-espi" }, + {} +}; +MODULE_DEVICE_TABLE(of, of_fsl_espi_match); + +static struct platform_driver fsl_espi_driver = { + .driver = { + .name = "fsl_espi", + .owner = THIS_MODULE, + .of_match_table = of_fsl_espi_match, + }, + .probe = of_fsl_espi_probe, + .remove = __devexit_p(of_fsl_espi_remove), +}; + +static int __init fsl_espi_init(void) +{ + return platform_driver_register(&fsl_espi_driver); +} +module_init(fsl_espi_init); + +static void __exit fsl_espi_exit(void) +{ + platform_driver_unregister(&fsl_espi_driver); +} +module_exit(fsl_espi_exit); + +MODULE_AUTHOR("Mingkai Hu"); +MODULE_DESCRIPTION("Enhanced Freescale SPI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-fsl-lib.c b/drivers/spi/spi-fsl-lib.c new file mode 100644 index 000000000000..2674fad7f68a --- /dev/null +++ b/drivers/spi/spi-fsl-lib.c @@ -0,0 +1,236 @@ +/* + * Freescale SPI/eSPI controller driver library. + * + * Maintainer: Kumar Gala + * + * Copyright (C) 2006 Polycom, Inc. + * + * CPM SPI and QE buffer descriptors mode support: + * Copyright (c) 2009 MontaVista Software, Inc. + * Author: Anton Vorontsov + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include "spi-fsl-lib.h" + +#define MPC8XXX_SPI_RX_BUF(type) \ +void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ +{ \ + type *rx = mpc8xxx_spi->rx; \ + *rx++ = (type)(data >> mpc8xxx_spi->rx_shift); \ + mpc8xxx_spi->rx = rx; \ +} + +#define MPC8XXX_SPI_TX_BUF(type) \ +u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi) \ +{ \ + u32 data; \ + const type *tx = mpc8xxx_spi->tx; \ + if (!tx) \ + return 0; \ + data = *tx++ << mpc8xxx_spi->tx_shift; \ + mpc8xxx_spi->tx = tx; \ + return data; \ +} + +MPC8XXX_SPI_RX_BUF(u8) +MPC8XXX_SPI_RX_BUF(u16) +MPC8XXX_SPI_RX_BUF(u32) +MPC8XXX_SPI_TX_BUF(u8) +MPC8XXX_SPI_TX_BUF(u16) +MPC8XXX_SPI_TX_BUF(u32) + +struct mpc8xxx_spi_probe_info *to_of_pinfo(struct fsl_spi_platform_data *pdata) +{ + return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); +} + +void mpc8xxx_spi_work(struct work_struct *work) +{ + struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi, + work); + + spin_lock_irq(&mpc8xxx_spi->lock); + while (!list_empty(&mpc8xxx_spi->queue)) { + struct spi_message *m = container_of(mpc8xxx_spi->queue.next, + struct spi_message, queue); + + list_del_init(&m->queue); + spin_unlock_irq(&mpc8xxx_spi->lock); + + if (mpc8xxx_spi->spi_do_one_msg) + mpc8xxx_spi->spi_do_one_msg(m); + + spin_lock_irq(&mpc8xxx_spi->lock); + } + spin_unlock_irq(&mpc8xxx_spi->lock); +} + +int mpc8xxx_spi_transfer(struct spi_device *spi, + struct spi_message *m) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + unsigned long flags; + + m->actual_length = 0; + m->status = -EINPROGRESS; + + spin_lock_irqsave(&mpc8xxx_spi->lock, flags); + list_add_tail(&m->queue, &mpc8xxx_spi->queue); + queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work); + spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags); + + return 0; +} + +void mpc8xxx_spi_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} + +const char *mpc8xxx_spi_strmode(unsigned int flags) +{ + if (flags & SPI_QE_CPU_MODE) { + return "QE CPU"; + } else if (flags & SPI_CPM_MODE) { + if (flags & SPI_QE) + return "QE"; + else if (flags & SPI_CPM2) + return "CPM2"; + else + return "CPM1"; + } + return "CPU"; +} + +int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, + unsigned int irq) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct spi_master *master; + struct mpc8xxx_spi *mpc8xxx_spi; + int ret = 0; + + master = dev_get_drvdata(dev); + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH + | SPI_LSB_FIRST | SPI_LOOP; + + master->transfer = mpc8xxx_spi_transfer; + master->cleanup = mpc8xxx_spi_cleanup; + master->dev.of_node = dev->of_node; + + mpc8xxx_spi = spi_master_get_devdata(master); + mpc8xxx_spi->dev = dev; + mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; + mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; + mpc8xxx_spi->flags = pdata->flags; + mpc8xxx_spi->spibrg = pdata->sysclk; + mpc8xxx_spi->irq = irq; + + mpc8xxx_spi->rx_shift = 0; + mpc8xxx_spi->tx_shift = 0; + + init_completion(&mpc8xxx_spi->done); + + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->max_chipselect; + + spin_lock_init(&mpc8xxx_spi->lock); + init_completion(&mpc8xxx_spi->done); + INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work); + INIT_LIST_HEAD(&mpc8xxx_spi->queue); + + mpc8xxx_spi->workqueue = create_singlethread_workqueue( + dev_name(master->dev.parent)); + if (mpc8xxx_spi->workqueue == NULL) { + ret = -EBUSY; + goto err; + } + + return 0; + +err: + return ret; +} + +int __devexit mpc8xxx_spi_remove(struct device *dev) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + struct spi_master *master; + + master = dev_get_drvdata(dev); + mpc8xxx_spi = spi_master_get_devdata(master); + + flush_workqueue(mpc8xxx_spi->workqueue); + destroy_workqueue(mpc8xxx_spi->workqueue); + spi_unregister_master(master); + + free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); + + if (mpc8xxx_spi->spi_remove) + mpc8xxx_spi->spi_remove(mpc8xxx_spi); + + return 0; +} + +int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev) +{ + struct device *dev = &ofdev->dev; + struct device_node *np = ofdev->dev.of_node; + struct mpc8xxx_spi_probe_info *pinfo; + struct fsl_spi_platform_data *pdata; + const void *prop; + int ret = -ENOMEM; + + pinfo = kzalloc(sizeof(*pinfo), GFP_KERNEL); + if (!pinfo) + return -ENOMEM; + + pdata = &pinfo->pdata; + dev->platform_data = pdata; + + /* Allocate bus num dynamically. */ + pdata->bus_num = -1; + + /* SPI controller is either clocked from QE or SoC clock. */ + pdata->sysclk = get_brgfreq(); + if (pdata->sysclk == -1) { + pdata->sysclk = fsl_get_sys_freq(); + if (pdata->sysclk == -1) { + ret = -ENODEV; + goto err; + } + } + + prop = of_get_property(np, "mode", NULL); + if (prop && !strcmp(prop, "cpu-qe")) + pdata->flags = SPI_QE_CPU_MODE; + else if (prop && !strcmp(prop, "qe")) + pdata->flags = SPI_CPM_MODE | SPI_QE; + else if (of_device_is_compatible(np, "fsl,cpm2-spi")) + pdata->flags = SPI_CPM_MODE | SPI_CPM2; + else if (of_device_is_compatible(np, "fsl,cpm1-spi")) + pdata->flags = SPI_CPM_MODE | SPI_CPM1; + + return 0; + +err: + kfree(pinfo); + return ret; +} diff --git a/drivers/spi/spi-fsl-lib.h b/drivers/spi/spi-fsl-lib.h new file mode 100644 index 000000000000..cbe881b9ea76 --- /dev/null +++ b/drivers/spi/spi-fsl-lib.h @@ -0,0 +1,123 @@ +/* + * Freescale SPI/eSPI controller driver library. + * + * Maintainer: Kumar Gala + * + * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright (C) 2006 Polycom, Inc. + * + * CPM SPI and QE buffer descriptors mode support: + * Copyright (c) 2009 MontaVista Software, Inc. + * Author: Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __SPI_FSL_LIB_H__ +#define __SPI_FSL_LIB_H__ + +#include + +/* SPI/eSPI Controller driver's private data. */ +struct mpc8xxx_spi { + struct device *dev; + void *reg_base; + + /* rx & tx bufs from the spi_transfer */ + const void *tx; + void *rx; +#ifdef CONFIG_SPI_FSL_ESPI + int len; +#endif + + int subblock; + struct spi_pram __iomem *pram; + struct cpm_buf_desc __iomem *tx_bd; + struct cpm_buf_desc __iomem *rx_bd; + + struct spi_transfer *xfer_in_progress; + + /* dma addresses for CPM transfers */ + dma_addr_t tx_dma; + dma_addr_t rx_dma; + bool map_tx_dma; + bool map_rx_dma; + + dma_addr_t dma_dummy_tx; + dma_addr_t dma_dummy_rx; + + /* functions to deal with different sized buffers */ + void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); + u32(*get_tx) (struct mpc8xxx_spi *); + + /* hooks for different controller driver */ + void (*spi_do_one_msg) (struct spi_message *m); + void (*spi_remove) (struct mpc8xxx_spi *mspi); + + unsigned int count; + unsigned int irq; + + unsigned nsecs; /* (clock cycle time)/2 */ + + u32 spibrg; /* SPIBRG input clock */ + u32 rx_shift; /* RX data reg shift when in qe mode */ + u32 tx_shift; /* TX data reg shift when in qe mode */ + + unsigned int flags; + + struct workqueue_struct *workqueue; + struct work_struct work; + + struct list_head queue; + spinlock_t lock; + + struct completion done; +}; + +struct spi_mpc8xxx_cs { + /* functions to deal with different sized buffers */ + void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); + u32 (*get_tx) (struct mpc8xxx_spi *); + u32 rx_shift; /* RX data reg shift when in qe mode */ + u32 tx_shift; /* TX data reg shift when in qe mode */ + u32 hw_mode; /* Holds HW mode register settings */ +}; + +static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val) +{ + out_be32(reg, val); +} + +static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg) +{ + return in_be32(reg); +} + +struct mpc8xxx_spi_probe_info { + struct fsl_spi_platform_data pdata; + int *gpios; + bool *alow_flags; +}; + +extern u32 mpc8xxx_spi_tx_buf_u8(struct mpc8xxx_spi *mpc8xxx_spi); +extern u32 mpc8xxx_spi_tx_buf_u16(struct mpc8xxx_spi *mpc8xxx_spi); +extern u32 mpc8xxx_spi_tx_buf_u32(struct mpc8xxx_spi *mpc8xxx_spi); +extern void mpc8xxx_spi_rx_buf_u8(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); +extern void mpc8xxx_spi_rx_buf_u16(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); +extern void mpc8xxx_spi_rx_buf_u32(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); + +extern struct mpc8xxx_spi_probe_info *to_of_pinfo( + struct fsl_spi_platform_data *pdata); +extern int mpc8xxx_spi_bufs(struct mpc8xxx_spi *mspi, + struct spi_transfer *t, unsigned int len); +extern int mpc8xxx_spi_transfer(struct spi_device *spi, struct spi_message *m); +extern void mpc8xxx_spi_cleanup(struct spi_device *spi); +extern const char *mpc8xxx_spi_strmode(unsigned int flags); +extern int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, + unsigned int irq); +extern int mpc8xxx_spi_remove(struct device *dev); +extern int of_mpc8xxx_spi_probe(struct platform_device *ofdev); + +#endif /* __SPI_FSL_LIB_H__ */ diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c new file mode 100644 index 000000000000..e013117a404d --- /dev/null +++ b/drivers/spi/spi-fsl-spi.c @@ -0,0 +1,1192 @@ +/* + * Freescale SPI controller driver. + * + * Maintainer: Kumar Gala + * + * Copyright (C) 2006 Polycom, Inc. + * Copyright 2010 Freescale Semiconductor, Inc. + * + * CPM SPI and QE buffer descriptors mode support: + * Copyright (c) 2009 MontaVista Software, Inc. + * Author: Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "spi-fsl-lib.h" + +/* CPM1 and CPM2 are mutually exclusive. */ +#ifdef CONFIG_CPM1 +#include +#define CPM_SPI_CMD mk_cr_cmd(CPM_CR_CH_SPI, 0) +#else +#include +#define CPM_SPI_CMD mk_cr_cmd(CPM_CR_SPI_PAGE, CPM_CR_SPI_SBLOCK, 0, 0) +#endif + +/* SPI Controller registers */ +struct fsl_spi_reg { + u8 res1[0x20]; + __be32 mode; + __be32 event; + __be32 mask; + __be32 command; + __be32 transmit; + __be32 receive; +}; + +/* SPI Controller mode register definitions */ +#define SPMODE_LOOP (1 << 30) +#define SPMODE_CI_INACTIVEHIGH (1 << 29) +#define SPMODE_CP_BEGIN_EDGECLK (1 << 28) +#define SPMODE_DIV16 (1 << 27) +#define SPMODE_REV (1 << 26) +#define SPMODE_MS (1 << 25) +#define SPMODE_ENABLE (1 << 24) +#define SPMODE_LEN(x) ((x) << 20) +#define SPMODE_PM(x) ((x) << 16) +#define SPMODE_OP (1 << 14) +#define SPMODE_CG(x) ((x) << 7) + +/* + * Default for SPI Mode: + * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk + */ +#define SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \ + SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf)) + +/* SPIE register values */ +#define SPIE_NE 0x00000200 /* Not empty */ +#define SPIE_NF 0x00000100 /* Not full */ + +/* SPIM register values */ +#define SPIM_NE 0x00000200 /* Not empty */ +#define SPIM_NF 0x00000100 /* Not full */ + +#define SPIE_TXB 0x00000200 /* Last char is written to tx fifo */ +#define SPIE_RXB 0x00000100 /* Last char is written to rx buf */ + +/* SPCOM register values */ +#define SPCOM_STR (1 << 23) /* Start transmit */ + +#define SPI_PRAM_SIZE 0x100 +#define SPI_MRBLR ((unsigned int)PAGE_SIZE) + +static void *fsl_dummy_rx; +static DEFINE_MUTEX(fsl_dummy_rx_lock); +static int fsl_dummy_rx_refcnt; + +static void fsl_spi_change_mode(struct spi_device *spi) +{ + struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); + struct spi_mpc8xxx_cs *cs = spi->controller_state; + struct fsl_spi_reg *reg_base = mspi->reg_base; + __be32 __iomem *mode = ®_base->mode; + unsigned long flags; + + if (cs->hw_mode == mpc8xxx_spi_read_reg(mode)) + return; + + /* Turn off IRQs locally to minimize time that SPI is disabled. */ + local_irq_save(flags); + + /* Turn off SPI unit prior changing mode */ + mpc8xxx_spi_write_reg(mode, cs->hw_mode & ~SPMODE_ENABLE); + + /* When in CPM mode, we need to reinit tx and rx. */ + if (mspi->flags & SPI_CPM_MODE) { + if (mspi->flags & SPI_QE) { + qe_issue_cmd(QE_INIT_TX_RX, mspi->subblock, + QE_CR_PROTOCOL_UNSPECIFIED, 0); + } else { + cpm_command(CPM_SPI_CMD, CPM_CR_INIT_TRX); + if (mspi->flags & SPI_CPM1) { + out_be16(&mspi->pram->rbptr, + in_be16(&mspi->pram->rbase)); + out_be16(&mspi->pram->tbptr, + in_be16(&mspi->pram->tbase)); + } + } + } + mpc8xxx_spi_write_reg(mode, cs->hw_mode); + local_irq_restore(flags); +} + +static void fsl_spi_chipselect(struct spi_device *spi, int value) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + struct fsl_spi_platform_data *pdata = spi->dev.parent->platform_data; + bool pol = spi->mode & SPI_CS_HIGH; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + if (value == BITBANG_CS_INACTIVE) { + if (pdata->cs_control) + pdata->cs_control(spi, !pol); + } + + if (value == BITBANG_CS_ACTIVE) { + mpc8xxx_spi->rx_shift = cs->rx_shift; + mpc8xxx_spi->tx_shift = cs->tx_shift; + mpc8xxx_spi->get_rx = cs->get_rx; + mpc8xxx_spi->get_tx = cs->get_tx; + + fsl_spi_change_mode(spi); + + if (pdata->cs_control) + pdata->cs_control(spi, pol); + } +} + +static int mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, + struct spi_device *spi, + struct mpc8xxx_spi *mpc8xxx_spi, + int bits_per_word) +{ + cs->rx_shift = 0; + cs->tx_shift = 0; + if (bits_per_word <= 8) { + cs->get_rx = mpc8xxx_spi_rx_buf_u8; + cs->get_tx = mpc8xxx_spi_tx_buf_u8; + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { + cs->rx_shift = 16; + cs->tx_shift = 24; + } + } else if (bits_per_word <= 16) { + cs->get_rx = mpc8xxx_spi_rx_buf_u16; + cs->get_tx = mpc8xxx_spi_tx_buf_u16; + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { + cs->rx_shift = 16; + cs->tx_shift = 16; + } + } else if (bits_per_word <= 32) { + cs->get_rx = mpc8xxx_spi_rx_buf_u32; + cs->get_tx = mpc8xxx_spi_tx_buf_u32; + } else + return -EINVAL; + + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE && + spi->mode & SPI_LSB_FIRST) { + cs->tx_shift = 0; + if (bits_per_word <= 8) + cs->rx_shift = 8; + else + cs->rx_shift = 0; + } + mpc8xxx_spi->rx_shift = cs->rx_shift; + mpc8xxx_spi->tx_shift = cs->tx_shift; + mpc8xxx_spi->get_rx = cs->get_rx; + mpc8xxx_spi->get_tx = cs->get_tx; + + return bits_per_word; +} + +static int mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, + struct spi_device *spi, + int bits_per_word) +{ + /* QE uses Little Endian for words > 8 + * so transform all words > 8 into 8 bits + * Unfortnatly that doesn't work for LSB so + * reject these for now */ + /* Note: 32 bits word, LSB works iff + * tfcr/rfcr is set to CPMFCR_GBL */ + if (spi->mode & SPI_LSB_FIRST && + bits_per_word > 8) + return -EINVAL; + if (bits_per_word > 8) + return 8; /* pretend its 8 bits */ + return bits_per_word; +} + +static int fsl_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + int bits_per_word = 0; + u8 pm; + u32 hz = 0; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + mpc8xxx_spi = spi_master_get_devdata(spi->master); + + if (t) { + bits_per_word = t->bits_per_word; + hz = t->speed_hz; + } + + /* spi_transfer level calls that work per-word */ + if (!bits_per_word) + bits_per_word = spi->bits_per_word; + + /* Make sure its a bit width we support [4..16, 32] */ + if ((bits_per_word < 4) + || ((bits_per_word > 16) && (bits_per_word != 32))) + return -EINVAL; + + if (!hz) + hz = spi->max_speed_hz; + + if (!(mpc8xxx_spi->flags & SPI_CPM_MODE)) + bits_per_word = mspi_apply_cpu_mode_quirks(cs, spi, + mpc8xxx_spi, + bits_per_word); + else if (mpc8xxx_spi->flags & SPI_QE) + bits_per_word = mspi_apply_qe_mode_quirks(cs, spi, + bits_per_word); + + if (bits_per_word < 0) + return bits_per_word; + + if (bits_per_word == 32) + bits_per_word = 0; + else + bits_per_word = bits_per_word - 1; + + /* mask out bits we are going to set */ + cs->hw_mode &= ~(SPMODE_LEN(0xF) | SPMODE_DIV16 + | SPMODE_PM(0xF)); + + cs->hw_mode |= SPMODE_LEN(bits_per_word); + + if ((mpc8xxx_spi->spibrg / hz) > 64) { + cs->hw_mode |= SPMODE_DIV16; + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1; + + WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " + "Will use %d Hz instead.\n", dev_name(&spi->dev), + hz, mpc8xxx_spi->spibrg / 1024); + if (pm > 16) + pm = 16; + } else { + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; + } + if (pm) + pm--; + + cs->hw_mode |= SPMODE_PM(pm); + + fsl_spi_change_mode(spi); + return 0; +} + +static void fsl_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) +{ + struct cpm_buf_desc __iomem *tx_bd = mspi->tx_bd; + struct cpm_buf_desc __iomem *rx_bd = mspi->rx_bd; + unsigned int xfer_len = min(mspi->count, SPI_MRBLR); + unsigned int xfer_ofs; + struct fsl_spi_reg *reg_base = mspi->reg_base; + + xfer_ofs = mspi->xfer_in_progress->len - mspi->count; + + if (mspi->rx_dma == mspi->dma_dummy_rx) + out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma); + else + out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs); + out_be16(&rx_bd->cbd_datlen, 0); + out_be16(&rx_bd->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT | BD_SC_WRAP); + + if (mspi->tx_dma == mspi->dma_dummy_tx) + out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma); + else + out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs); + out_be16(&tx_bd->cbd_datlen, xfer_len); + out_be16(&tx_bd->cbd_sc, BD_SC_READY | BD_SC_INTRPT | BD_SC_WRAP | + BD_SC_LAST); + + /* start transfer */ + mpc8xxx_spi_write_reg(®_base->command, SPCOM_STR); +} + +static int fsl_spi_cpm_bufs(struct mpc8xxx_spi *mspi, + struct spi_transfer *t, bool is_dma_mapped) +{ + struct device *dev = mspi->dev; + struct fsl_spi_reg *reg_base = mspi->reg_base; + + if (is_dma_mapped) { + mspi->map_tx_dma = 0; + mspi->map_rx_dma = 0; + } else { + mspi->map_tx_dma = 1; + mspi->map_rx_dma = 1; + } + + if (!t->tx_buf) { + mspi->tx_dma = mspi->dma_dummy_tx; + mspi->map_tx_dma = 0; + } + + if (!t->rx_buf) { + mspi->rx_dma = mspi->dma_dummy_rx; + mspi->map_rx_dma = 0; + } + + if (mspi->map_tx_dma) { + void *nonconst_tx = (void *)mspi->tx; /* shut up gcc */ + + mspi->tx_dma = dma_map_single(dev, nonconst_tx, t->len, + DMA_TO_DEVICE); + if (dma_mapping_error(dev, mspi->tx_dma)) { + dev_err(dev, "unable to map tx dma\n"); + return -ENOMEM; + } + } else if (t->tx_buf) { + mspi->tx_dma = t->tx_dma; + } + + if (mspi->map_rx_dma) { + mspi->rx_dma = dma_map_single(dev, mspi->rx, t->len, + DMA_FROM_DEVICE); + if (dma_mapping_error(dev, mspi->rx_dma)) { + dev_err(dev, "unable to map rx dma\n"); + goto err_rx_dma; + } + } else if (t->rx_buf) { + mspi->rx_dma = t->rx_dma; + } + + /* enable rx ints */ + mpc8xxx_spi_write_reg(®_base->mask, SPIE_RXB); + + mspi->xfer_in_progress = t; + mspi->count = t->len; + + /* start CPM transfers */ + fsl_spi_cpm_bufs_start(mspi); + + return 0; + +err_rx_dma: + if (mspi->map_tx_dma) + dma_unmap_single(dev, mspi->tx_dma, t->len, DMA_TO_DEVICE); + return -ENOMEM; +} + +static void fsl_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) +{ + struct device *dev = mspi->dev; + struct spi_transfer *t = mspi->xfer_in_progress; + + if (mspi->map_tx_dma) + dma_unmap_single(dev, mspi->tx_dma, t->len, DMA_TO_DEVICE); + if (mspi->map_rx_dma) + dma_unmap_single(dev, mspi->rx_dma, t->len, DMA_FROM_DEVICE); + mspi->xfer_in_progress = NULL; +} + +static int fsl_spi_cpu_bufs(struct mpc8xxx_spi *mspi, + struct spi_transfer *t, unsigned int len) +{ + u32 word; + struct fsl_spi_reg *reg_base = mspi->reg_base; + + mspi->count = len; + + /* enable rx ints */ + mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE); + + /* transmit word */ + word = mspi->get_tx(mspi); + mpc8xxx_spi_write_reg(®_base->transmit, word); + + return 0; +} + +static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t, + bool is_dma_mapped) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + struct fsl_spi_reg *reg_base; + unsigned int len = t->len; + u8 bits_per_word; + int ret; + + reg_base = mpc8xxx_spi->reg_base; + bits_per_word = spi->bits_per_word; + if (t->bits_per_word) + bits_per_word = t->bits_per_word; + + if (bits_per_word > 8) { + /* invalid length? */ + if (len & 1) + return -EINVAL; + len /= 2; + } + if (bits_per_word > 16) { + /* invalid length? */ + if (len & 1) + return -EINVAL; + len /= 2; + } + + mpc8xxx_spi->tx = t->tx_buf; + mpc8xxx_spi->rx = t->rx_buf; + + INIT_COMPLETION(mpc8xxx_spi->done); + + if (mpc8xxx_spi->flags & SPI_CPM_MODE) + ret = fsl_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped); + else + ret = fsl_spi_cpu_bufs(mpc8xxx_spi, t, len); + if (ret) + return ret; + + wait_for_completion(&mpc8xxx_spi->done); + + /* disable rx ints */ + mpc8xxx_spi_write_reg(®_base->mask, 0); + + if (mpc8xxx_spi->flags & SPI_CPM_MODE) + fsl_spi_cpm_bufs_complete(mpc8xxx_spi); + + return mpc8xxx_spi->count; +} + +static void fsl_spi_do_one_msg(struct spi_message *m) +{ + struct spi_device *spi = m->spi; + struct spi_transfer *t; + unsigned int cs_change; + const int nsecs = 50; + int status; + + cs_change = 1; + status = 0; + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->bits_per_word || t->speed_hz) { + /* Don't allow changes if CS is active */ + status = -EINVAL; + + if (cs_change) + status = fsl_spi_setup_transfer(spi, t); + if (status < 0) + break; + } + + if (cs_change) { + fsl_spi_chipselect(spi, BITBANG_CS_ACTIVE); + ndelay(nsecs); + } + cs_change = t->cs_change; + if (t->len) + status = fsl_spi_bufs(spi, t, m->is_dma_mapped); + if (status) { + status = -EMSGSIZE; + break; + } + m->actual_length += t->len; + + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (cs_change) { + ndelay(nsecs); + fsl_spi_chipselect(spi, BITBANG_CS_INACTIVE); + ndelay(nsecs); + } + } + + m->status = status; + m->complete(m->context); + + if (status || !cs_change) { + ndelay(nsecs); + fsl_spi_chipselect(spi, BITBANG_CS_INACTIVE); + } + + fsl_spi_setup_transfer(spi, NULL); +} + +static int fsl_spi_setup(struct spi_device *spi) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_spi_reg *reg_base; + int retval; + u32 hw_mode; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + if (!spi->max_speed_hz) + return -EINVAL; + + if (!cs) { + cs = kzalloc(sizeof *cs, GFP_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + mpc8xxx_spi = spi_master_get_devdata(spi->master); + + reg_base = mpc8xxx_spi->reg_base; + + hw_mode = cs->hw_mode; /* Save original settings */ + cs->hw_mode = mpc8xxx_spi_read_reg(®_base->mode); + /* mask out bits we are going to set */ + cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH + | SPMODE_REV | SPMODE_LOOP); + + if (spi->mode & SPI_CPHA) + cs->hw_mode |= SPMODE_CP_BEGIN_EDGECLK; + if (spi->mode & SPI_CPOL) + cs->hw_mode |= SPMODE_CI_INACTIVEHIGH; + if (!(spi->mode & SPI_LSB_FIRST)) + cs->hw_mode |= SPMODE_REV; + if (spi->mode & SPI_LOOP) + cs->hw_mode |= SPMODE_LOOP; + + retval = fsl_spi_setup_transfer(spi, NULL); + if (retval < 0) { + cs->hw_mode = hw_mode; /* Restore settings */ + return retval; + } + return 0; +} + +static void fsl_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) +{ + u16 len; + struct fsl_spi_reg *reg_base = mspi->reg_base; + + dev_dbg(mspi->dev, "%s: bd datlen %d, count %d\n", __func__, + in_be16(&mspi->rx_bd->cbd_datlen), mspi->count); + + len = in_be16(&mspi->rx_bd->cbd_datlen); + if (len > mspi->count) { + WARN_ON(1); + len = mspi->count; + } + + /* Clear the events */ + mpc8xxx_spi_write_reg(®_base->event, events); + + mspi->count -= len; + if (mspi->count) + fsl_spi_cpm_bufs_start(mspi); + else + complete(&mspi->done); +} + +static void fsl_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) +{ + struct fsl_spi_reg *reg_base = mspi->reg_base; + + /* We need handle RX first */ + if (events & SPIE_NE) { + u32 rx_data = mpc8xxx_spi_read_reg(®_base->receive); + + if (mspi->rx) + mspi->get_rx(rx_data, mspi); + } + + if ((events & SPIE_NF) == 0) + /* spin until TX is done */ + while (((events = + mpc8xxx_spi_read_reg(®_base->event)) & + SPIE_NF) == 0) + cpu_relax(); + + /* Clear the events */ + mpc8xxx_spi_write_reg(®_base->event, events); + + mspi->count -= 1; + if (mspi->count) { + u32 word = mspi->get_tx(mspi); + + mpc8xxx_spi_write_reg(®_base->transmit, word); + } else { + complete(&mspi->done); + } +} + +static irqreturn_t fsl_spi_irq(s32 irq, void *context_data) +{ + struct mpc8xxx_spi *mspi = context_data; + irqreturn_t ret = IRQ_NONE; + u32 events; + struct fsl_spi_reg *reg_base = mspi->reg_base; + + /* Get interrupt events(tx/rx) */ + events = mpc8xxx_spi_read_reg(®_base->event); + if (events) + ret = IRQ_HANDLED; + + dev_dbg(mspi->dev, "%s: events %x\n", __func__, events); + + if (mspi->flags & SPI_CPM_MODE) + fsl_spi_cpm_irq(mspi, events); + else + fsl_spi_cpu_irq(mspi, events); + + return ret; +} + +static void *fsl_spi_alloc_dummy_rx(void) +{ + mutex_lock(&fsl_dummy_rx_lock); + + if (!fsl_dummy_rx) + fsl_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL); + if (fsl_dummy_rx) + fsl_dummy_rx_refcnt++; + + mutex_unlock(&fsl_dummy_rx_lock); + + return fsl_dummy_rx; +} + +static void fsl_spi_free_dummy_rx(void) +{ + mutex_lock(&fsl_dummy_rx_lock); + + switch (fsl_dummy_rx_refcnt) { + case 0: + WARN_ON(1); + break; + case 1: + kfree(fsl_dummy_rx); + fsl_dummy_rx = NULL; + /* fall through */ + default: + fsl_dummy_rx_refcnt--; + break; + } + + mutex_unlock(&fsl_dummy_rx_lock); +} + +static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) +{ + struct device *dev = mspi->dev; + struct device_node *np = dev->of_node; + const u32 *iprop; + int size; + unsigned long spi_base_ofs; + unsigned long pram_ofs = -ENOMEM; + + /* Can't use of_address_to_resource(), QE muram isn't at 0. */ + iprop = of_get_property(np, "reg", &size); + + /* QE with a fixed pram location? */ + if (mspi->flags & SPI_QE && iprop && size == sizeof(*iprop) * 4) + return cpm_muram_alloc_fixed(iprop[2], SPI_PRAM_SIZE); + + /* QE but with a dynamic pram location? */ + if (mspi->flags & SPI_QE) { + pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); + qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, mspi->subblock, + QE_CR_PROTOCOL_UNSPECIFIED, pram_ofs); + return pram_ofs; + } + + /* CPM1 and CPM2 pram must be at a fixed addr. */ + if (!iprop || size != sizeof(*iprop) * 4) + return -ENOMEM; + + spi_base_ofs = cpm_muram_alloc_fixed(iprop[2], 2); + if (IS_ERR_VALUE(spi_base_ofs)) + return -ENOMEM; + + if (mspi->flags & SPI_CPM2) { + pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); + if (!IS_ERR_VALUE(pram_ofs)) { + u16 __iomem *spi_base = cpm_muram_addr(spi_base_ofs); + + out_be16(spi_base, pram_ofs); + } + } else { + struct spi_pram __iomem *pram = cpm_muram_addr(spi_base_ofs); + u16 rpbase = in_be16(&pram->rpbase); + + /* Microcode relocation patch applied? */ + if (rpbase) + pram_ofs = rpbase; + else + return spi_base_ofs; + } + + cpm_muram_free(spi_base_ofs); + return pram_ofs; +} + +static int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) +{ + struct device *dev = mspi->dev; + struct device_node *np = dev->of_node; + const u32 *iprop; + int size; + unsigned long pram_ofs; + unsigned long bds_ofs; + + if (!(mspi->flags & SPI_CPM_MODE)) + return 0; + + if (!fsl_spi_alloc_dummy_rx()) + return -ENOMEM; + + if (mspi->flags & SPI_QE) { + iprop = of_get_property(np, "cell-index", &size); + if (iprop && size == sizeof(*iprop)) + mspi->subblock = *iprop; + + switch (mspi->subblock) { + default: + dev_warn(dev, "cell-index unspecified, assuming SPI1"); + /* fall through */ + case 0: + mspi->subblock = QE_CR_SUBBLOCK_SPI1; + break; + case 1: + mspi->subblock = QE_CR_SUBBLOCK_SPI2; + break; + } + } + + pram_ofs = fsl_spi_cpm_get_pram(mspi); + if (IS_ERR_VALUE(pram_ofs)) { + dev_err(dev, "can't allocate spi parameter ram\n"); + goto err_pram; + } + + bds_ofs = cpm_muram_alloc(sizeof(*mspi->tx_bd) + + sizeof(*mspi->rx_bd), 8); + if (IS_ERR_VALUE(bds_ofs)) { + dev_err(dev, "can't allocate bds\n"); + goto err_bds; + } + + mspi->dma_dummy_tx = dma_map_single(dev, empty_zero_page, PAGE_SIZE, + DMA_TO_DEVICE); + if (dma_mapping_error(dev, mspi->dma_dummy_tx)) { + dev_err(dev, "unable to map dummy tx buffer\n"); + goto err_dummy_tx; + } + + mspi->dma_dummy_rx = dma_map_single(dev, fsl_dummy_rx, SPI_MRBLR, + DMA_FROM_DEVICE); + if (dma_mapping_error(dev, mspi->dma_dummy_rx)) { + dev_err(dev, "unable to map dummy rx buffer\n"); + goto err_dummy_rx; + } + + mspi->pram = cpm_muram_addr(pram_ofs); + + mspi->tx_bd = cpm_muram_addr(bds_ofs); + mspi->rx_bd = cpm_muram_addr(bds_ofs + sizeof(*mspi->tx_bd)); + + /* Initialize parameter ram. */ + out_be16(&mspi->pram->tbase, cpm_muram_offset(mspi->tx_bd)); + out_be16(&mspi->pram->rbase, cpm_muram_offset(mspi->rx_bd)); + out_8(&mspi->pram->tfcr, CPMFCR_EB | CPMFCR_GBL); + out_8(&mspi->pram->rfcr, CPMFCR_EB | CPMFCR_GBL); + out_be16(&mspi->pram->mrblr, SPI_MRBLR); + out_be32(&mspi->pram->rstate, 0); + out_be32(&mspi->pram->rdp, 0); + out_be16(&mspi->pram->rbptr, 0); + out_be16(&mspi->pram->rbc, 0); + out_be32(&mspi->pram->rxtmp, 0); + out_be32(&mspi->pram->tstate, 0); + out_be32(&mspi->pram->tdp, 0); + out_be16(&mspi->pram->tbptr, 0); + out_be16(&mspi->pram->tbc, 0); + out_be32(&mspi->pram->txtmp, 0); + + return 0; + +err_dummy_rx: + dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); +err_dummy_tx: + cpm_muram_free(bds_ofs); +err_bds: + cpm_muram_free(pram_ofs); +err_pram: + fsl_spi_free_dummy_rx(); + return -ENOMEM; +} + +static void fsl_spi_cpm_free(struct mpc8xxx_spi *mspi) +{ + struct device *dev = mspi->dev; + + dma_unmap_single(dev, mspi->dma_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE); + dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); + cpm_muram_free(cpm_muram_offset(mspi->tx_bd)); + cpm_muram_free(cpm_muram_offset(mspi->pram)); + fsl_spi_free_dummy_rx(); +} + +static void fsl_spi_remove(struct mpc8xxx_spi *mspi) +{ + iounmap(mspi->reg_base); + fsl_spi_cpm_free(mspi); +} + +static struct spi_master * __devinit fsl_spi_probe(struct device *dev, + struct resource *mem, unsigned int irq) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct spi_master *master; + struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_spi_reg *reg_base; + u32 regval; + int ret = 0; + + master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi)); + if (master == NULL) { + ret = -ENOMEM; + goto err; + } + + dev_set_drvdata(dev, master); + + ret = mpc8xxx_spi_probe(dev, mem, irq); + if (ret) + goto err_probe; + + master->setup = fsl_spi_setup; + + mpc8xxx_spi = spi_master_get_devdata(master); + mpc8xxx_spi->spi_do_one_msg = fsl_spi_do_one_msg; + mpc8xxx_spi->spi_remove = fsl_spi_remove; + + + ret = fsl_spi_cpm_init(mpc8xxx_spi); + if (ret) + goto err_cpm_init; + + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { + mpc8xxx_spi->rx_shift = 16; + mpc8xxx_spi->tx_shift = 24; + } + + mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem)); + if (mpc8xxx_spi->reg_base == NULL) { + ret = -ENOMEM; + goto err_ioremap; + } + + /* Register for SPI Interrupt */ + ret = request_irq(mpc8xxx_spi->irq, fsl_spi_irq, + 0, "fsl_spi", mpc8xxx_spi); + + if (ret != 0) + goto free_irq; + + reg_base = mpc8xxx_spi->reg_base; + + /* SPI controller initializations */ + mpc8xxx_spi_write_reg(®_base->mode, 0); + mpc8xxx_spi_write_reg(®_base->mask, 0); + mpc8xxx_spi_write_reg(®_base->command, 0); + mpc8xxx_spi_write_reg(®_base->event, 0xffffffff); + + /* Enable SPI interface */ + regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) + regval |= SPMODE_OP; + + mpc8xxx_spi_write_reg(®_base->mode, regval); + + ret = spi_register_master(master); + if (ret < 0) + goto unreg_master; + + dev_info(dev, "at 0x%p (irq = %d), %s mode\n", reg_base, + mpc8xxx_spi->irq, mpc8xxx_spi_strmode(mpc8xxx_spi->flags)); + + return master; + +unreg_master: + free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); +free_irq: + iounmap(mpc8xxx_spi->reg_base); +err_ioremap: + fsl_spi_cpm_free(mpc8xxx_spi); +err_cpm_init: +err_probe: + spi_master_put(master); +err: + return ERR_PTR(ret); +} + +static void fsl_spi_cs_control(struct spi_device *spi, bool on) +{ + struct device *dev = spi->dev.parent; + struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data); + u16 cs = spi->chip_select; + int gpio = pinfo->gpios[cs]; + bool alow = pinfo->alow_flags[cs]; + + gpio_set_value(gpio, on ^ alow); +} + +static int of_fsl_spi_get_chipselects(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); + unsigned int ngpios; + int i = 0; + int ret; + + ngpios = of_gpio_count(np); + if (!ngpios) { + /* + * SPI w/o chip-select line. One SPI device is still permitted + * though. + */ + pdata->max_chipselect = 1; + return 0; + } + + pinfo->gpios = kmalloc(ngpios * sizeof(*pinfo->gpios), GFP_KERNEL); + if (!pinfo->gpios) + return -ENOMEM; + memset(pinfo->gpios, -1, ngpios * sizeof(*pinfo->gpios)); + + pinfo->alow_flags = kzalloc(ngpios * sizeof(*pinfo->alow_flags), + GFP_KERNEL); + if (!pinfo->alow_flags) { + ret = -ENOMEM; + goto err_alloc_flags; + } + + for (; i < ngpios; i++) { + int gpio; + enum of_gpio_flags flags; + + gpio = of_get_gpio_flags(np, i, &flags); + if (!gpio_is_valid(gpio)) { + dev_err(dev, "invalid gpio #%d: %d\n", i, gpio); + ret = gpio; + goto err_loop; + } + + ret = gpio_request(gpio, dev_name(dev)); + if (ret) { + dev_err(dev, "can't request gpio #%d: %d\n", i, ret); + goto err_loop; + } + + pinfo->gpios[i] = gpio; + pinfo->alow_flags[i] = flags & OF_GPIO_ACTIVE_LOW; + + ret = gpio_direction_output(pinfo->gpios[i], + pinfo->alow_flags[i]); + if (ret) { + dev_err(dev, "can't set output direction for gpio " + "#%d: %d\n", i, ret); + goto err_loop; + } + } + + pdata->max_chipselect = ngpios; + pdata->cs_control = fsl_spi_cs_control; + + return 0; + +err_loop: + while (i >= 0) { + if (gpio_is_valid(pinfo->gpios[i])) + gpio_free(pinfo->gpios[i]); + i--; + } + + kfree(pinfo->alow_flags); + pinfo->alow_flags = NULL; +err_alloc_flags: + kfree(pinfo->gpios); + pinfo->gpios = NULL; + return ret; +} + +static int of_fsl_spi_free_chipselects(struct device *dev) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); + int i; + + if (!pinfo->gpios) + return 0; + + for (i = 0; i < pdata->max_chipselect; i++) { + if (gpio_is_valid(pinfo->gpios[i])) + gpio_free(pinfo->gpios[i]); + } + + kfree(pinfo->gpios); + kfree(pinfo->alow_flags); + return 0; +} + +static int __devinit of_fsl_spi_probe(struct platform_device *ofdev) +{ + struct device *dev = &ofdev->dev; + struct device_node *np = ofdev->dev.of_node; + struct spi_master *master; + struct resource mem; + struct resource irq; + int ret = -ENOMEM; + + ret = of_mpc8xxx_spi_probe(ofdev); + if (ret) + return ret; + + ret = of_fsl_spi_get_chipselects(dev); + if (ret) + goto err; + + ret = of_address_to_resource(np, 0, &mem); + if (ret) + goto err; + + ret = of_irq_to_resource(np, 0, &irq); + if (!ret) { + ret = -EINVAL; + goto err; + } + + master = fsl_spi_probe(dev, &mem, irq.start); + if (IS_ERR(master)) { + ret = PTR_ERR(master); + goto err; + } + + return 0; + +err: + of_fsl_spi_free_chipselects(dev); + return ret; +} + +static int __devexit of_fsl_spi_remove(struct platform_device *ofdev) +{ + int ret; + + ret = mpc8xxx_spi_remove(&ofdev->dev); + if (ret) + return ret; + of_fsl_spi_free_chipselects(&ofdev->dev); + return 0; +} + +static const struct of_device_id of_fsl_spi_match[] = { + { .compatible = "fsl,spi" }, + {} +}; +MODULE_DEVICE_TABLE(of, of_fsl_spi_match); + +static struct platform_driver of_fsl_spi_driver = { + .driver = { + .name = "fsl_spi", + .owner = THIS_MODULE, + .of_match_table = of_fsl_spi_match, + }, + .probe = of_fsl_spi_probe, + .remove = __devexit_p(of_fsl_spi_remove), +}; + +#ifdef CONFIG_MPC832x_RDB +/* + * XXX XXX XXX + * This is "legacy" platform driver, was used by the MPC8323E-RDB boards + * only. The driver should go away soon, since newer MPC8323E-RDB's device + * tree can work with OpenFirmware driver. But for now we support old trees + * as well. + */ +static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev) +{ + struct resource *mem; + int irq; + struct spi_master *master; + + if (!pdev->dev.platform_data) + return -EINVAL; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) + return -EINVAL; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return -EINVAL; + + master = fsl_spi_probe(&pdev->dev, mem, irq); + if (IS_ERR(master)) + return PTR_ERR(master); + return 0; +} + +static int __devexit plat_mpc8xxx_spi_remove(struct platform_device *pdev) +{ + return mpc8xxx_spi_remove(&pdev->dev); +} + +MODULE_ALIAS("platform:mpc8xxx_spi"); +static struct platform_driver mpc8xxx_spi_driver = { + .probe = plat_mpc8xxx_spi_probe, + .remove = __devexit_p(plat_mpc8xxx_spi_remove), + .driver = { + .name = "mpc8xxx_spi", + .owner = THIS_MODULE, + }, +}; + +static bool legacy_driver_failed; + +static void __init legacy_driver_register(void) +{ + legacy_driver_failed = platform_driver_register(&mpc8xxx_spi_driver); +} + +static void __exit legacy_driver_unregister(void) +{ + if (legacy_driver_failed) + return; + platform_driver_unregister(&mpc8xxx_spi_driver); +} +#else +static void __init legacy_driver_register(void) {} +static void __exit legacy_driver_unregister(void) {} +#endif /* CONFIG_MPC832x_RDB */ + +static int __init fsl_spi_init(void) +{ + legacy_driver_register(); + return platform_driver_register(&of_fsl_spi_driver); +} +module_init(fsl_spi_init); + +static void __exit fsl_spi_exit(void) +{ + platform_driver_unregister(&of_fsl_spi_driver); + legacy_driver_unregister(); +} +module_exit(fsl_spi_exit); + +MODULE_AUTHOR("Kumar Gala"); +MODULE_DESCRIPTION("Simple Freescale SPI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c new file mode 100644 index 000000000000..0e88ab745490 --- /dev/null +++ b/drivers/spi/spi-gpio.c @@ -0,0 +1,429 @@ +/* + * SPI master driver using generic bitbanged GPIO + * + * Copyright (C) 2006,2008 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include + +#include +#include +#include + + +/* + * This bitbanging SPI master driver should help make systems usable + * when a native hardware SPI engine is not available, perhaps because + * its driver isn't yet working or because the I/O pins it requires + * are used for other purposes. + * + * platform_device->driver_data ... points to spi_gpio + * + * spi->controller_state ... reserved for bitbang framework code + * spi->controller_data ... holds chipselect GPIO + * + * spi->master->dev.driver_data ... points to spi_gpio->bitbang + */ + +struct spi_gpio { + struct spi_bitbang bitbang; + struct spi_gpio_platform_data pdata; + struct platform_device *pdev; +}; + +/*----------------------------------------------------------------------*/ + +/* + * Because the overhead of going through four GPIO procedure calls + * per transferred bit can make performance a problem, this code + * is set up so that you can use it in either of two ways: + * + * - The slow generic way: set up platform_data to hold the GPIO + * numbers used for MISO/MOSI/SCK, and issue procedure calls for + * each of them. This driver can handle several such busses. + * + * - The quicker inlined way: only helps with platform GPIO code + * that inlines operations for constant GPIOs. This can give + * you tight (fast!) inner loops, but each such bus needs a + * new driver. You'll define a new C file, with Makefile and + * Kconfig support; the C code can be a total of six lines: + * + * #define DRIVER_NAME "myboard_spi2" + * #define SPI_MISO_GPIO 119 + * #define SPI_MOSI_GPIO 120 + * #define SPI_SCK_GPIO 121 + * #define SPI_N_CHIPSEL 4 + * #include "spi-gpio.c" + */ + +#ifndef DRIVER_NAME +#define DRIVER_NAME "spi_gpio" + +#define GENERIC_BITBANG /* vs tight inlines */ + +/* all functions referencing these symbols must define pdata */ +#define SPI_MISO_GPIO ((pdata)->miso) +#define SPI_MOSI_GPIO ((pdata)->mosi) +#define SPI_SCK_GPIO ((pdata)->sck) + +#define SPI_N_CHIPSEL ((pdata)->num_chipselect) + +#endif + +/*----------------------------------------------------------------------*/ + +static inline const struct spi_gpio_platform_data * __pure +spi_to_pdata(const struct spi_device *spi) +{ + const struct spi_bitbang *bang; + const struct spi_gpio *spi_gpio; + + bang = spi_master_get_devdata(spi->master); + spi_gpio = container_of(bang, struct spi_gpio, bitbang); + return &spi_gpio->pdata; +} + +/* this is #defined to avoid unused-variable warnings when inlining */ +#define pdata spi_to_pdata(spi) + +static inline void setsck(const struct spi_device *spi, int is_on) +{ + gpio_set_value(SPI_SCK_GPIO, is_on); +} + +static inline void setmosi(const struct spi_device *spi, int is_on) +{ + gpio_set_value(SPI_MOSI_GPIO, is_on); +} + +static inline int getmiso(const struct spi_device *spi) +{ + return !!gpio_get_value(SPI_MISO_GPIO); +} + +#undef pdata + +/* + * NOTE: this clocks "as fast as we can". It "should" be a function of the + * requested device clock. Software overhead means we usually have trouble + * reaching even one Mbit/sec (except when we can inline bitops), so for now + * we'll just assume we never need additional per-bit slowdowns. + */ +#define spidelay(nsecs) do {} while (0) + +#include "spi-bitbang-txrx.h" + +/* + * These functions can leverage inline expansion of GPIO calls to shrink + * costs for a txrx bit, often by factors of around ten (by instruction + * count). That is particularly visible for larger word sizes, but helps + * even with default 8-bit words. + * + * REVISIT overheads calling these functions for each word also have + * significant performance costs. Having txrx_bufs() calls that inline + * the txrx_word() logic would help performance, e.g. on larger blocks + * used with flash storage or MMC/SD. There should also be ways to make + * GCC be less stupid about reloading registers inside the I/O loops, + * even without inlined GPIO calls; __attribute__((hot)) on GCC 4.3? + */ + +static u32 spi_gpio_txrx_word_mode0(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); +} + +static u32 spi_gpio_txrx_word_mode1(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); +} + +static u32 spi_gpio_txrx_word_mode2(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); +} + +static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); +} + +/* + * These functions do not call setmosi or getmiso if respective flag + * (SPI_MASTER_NO_RX or SPI_MASTER_NO_TX) is set, so they are safe to + * call when such pin is not present or defined in the controller. + * A separate set of callbacks is defined to get highest possible + * speed in the generic case (when both MISO and MOSI lines are + * available), as optimiser will remove the checks when argument is + * constant. + */ + +static u32 spi_gpio_spec_txrx_word_mode0(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + unsigned flags = spi->master->flags; + return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits); +} + +static u32 spi_gpio_spec_txrx_word_mode1(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + unsigned flags = spi->master->flags; + return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits); +} + +static u32 spi_gpio_spec_txrx_word_mode2(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + unsigned flags = spi->master->flags; + return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits); +} + +static u32 spi_gpio_spec_txrx_word_mode3(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + unsigned flags = spi->master->flags; + return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits); +} + +/*----------------------------------------------------------------------*/ + +static void spi_gpio_chipselect(struct spi_device *spi, int is_active) +{ + unsigned long cs = (unsigned long) spi->controller_data; + + /* set initial clock polarity */ + if (is_active) + setsck(spi, spi->mode & SPI_CPOL); + + if (cs != SPI_GPIO_NO_CHIPSELECT) { + /* SPI is normally active-low */ + gpio_set_value(cs, (spi->mode & SPI_CS_HIGH) ? is_active : !is_active); + } +} + +static int spi_gpio_setup(struct spi_device *spi) +{ + unsigned long cs = (unsigned long) spi->controller_data; + int status = 0; + + if (spi->bits_per_word > 32) + return -EINVAL; + + if (!spi->controller_state) { + if (cs != SPI_GPIO_NO_CHIPSELECT) { + status = gpio_request(cs, dev_name(&spi->dev)); + if (status) + return status; + status = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH); + } + } + if (!status) + status = spi_bitbang_setup(spi); + if (status) { + if (!spi->controller_state && cs != SPI_GPIO_NO_CHIPSELECT) + gpio_free(cs); + } + return status; +} + +static void spi_gpio_cleanup(struct spi_device *spi) +{ + unsigned long cs = (unsigned long) spi->controller_data; + + if (cs != SPI_GPIO_NO_CHIPSELECT) + gpio_free(cs); + spi_bitbang_cleanup(spi); +} + +static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in) +{ + int value; + + value = gpio_request(pin, label); + if (value == 0) { + if (is_in) + value = gpio_direction_input(pin); + else + value = gpio_direction_output(pin, 0); + } + return value; +} + +static int __init +spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label, + u16 *res_flags) +{ + int value; + + /* NOTE: SPI_*_GPIO symbols may reference "pdata" */ + + if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) { + value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false); + if (value) + goto done; + } else { + /* HW configuration without MOSI pin */ + *res_flags |= SPI_MASTER_NO_TX; + } + + if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) { + value = spi_gpio_alloc(SPI_MISO_GPIO, label, true); + if (value) + goto free_mosi; + } else { + /* HW configuration without MISO pin */ + *res_flags |= SPI_MASTER_NO_RX; + } + + value = spi_gpio_alloc(SPI_SCK_GPIO, label, false); + if (value) + goto free_miso; + + goto done; + +free_miso: + if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) + gpio_free(SPI_MISO_GPIO); +free_mosi: + if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) + gpio_free(SPI_MOSI_GPIO); +done: + return value; +} + +static int __init spi_gpio_probe(struct platform_device *pdev) +{ + int status; + struct spi_master *master; + struct spi_gpio *spi_gpio; + struct spi_gpio_platform_data *pdata; + u16 master_flags = 0; + + pdata = pdev->dev.platform_data; +#ifdef GENERIC_BITBANG + if (!pdata || !pdata->num_chipselect) + return -ENODEV; +#endif + + status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags); + if (status < 0) + return status; + + master = spi_alloc_master(&pdev->dev, sizeof *spi_gpio); + if (!master) { + status = -ENOMEM; + goto gpio_free; + } + spi_gpio = spi_master_get_devdata(master); + platform_set_drvdata(pdev, spi_gpio); + + spi_gpio->pdev = pdev; + if (pdata) + spi_gpio->pdata = *pdata; + + master->flags = master_flags; + master->bus_num = pdev->id; + master->num_chipselect = SPI_N_CHIPSEL; + master->setup = spi_gpio_setup; + master->cleanup = spi_gpio_cleanup; + + spi_gpio->bitbang.master = spi_master_get(master); + spi_gpio->bitbang.chipselect = spi_gpio_chipselect; + + if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) { + spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0; + spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1; + spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2; + spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3; + } else { + spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0; + spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1; + spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2; + spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3; + } + spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer; + spi_gpio->bitbang.flags = SPI_CS_HIGH; + + status = spi_bitbang_start(&spi_gpio->bitbang); + if (status < 0) { + spi_master_put(spi_gpio->bitbang.master); +gpio_free: + if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) + gpio_free(SPI_MISO_GPIO); + if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) + gpio_free(SPI_MOSI_GPIO); + gpio_free(SPI_SCK_GPIO); + spi_master_put(master); + } + + return status; +} + +static int __exit spi_gpio_remove(struct platform_device *pdev) +{ + struct spi_gpio *spi_gpio; + struct spi_gpio_platform_data *pdata; + int status; + + spi_gpio = platform_get_drvdata(pdev); + pdata = pdev->dev.platform_data; + + /* stop() unregisters child devices too */ + status = spi_bitbang_stop(&spi_gpio->bitbang); + spi_master_put(spi_gpio->bitbang.master); + + platform_set_drvdata(pdev, NULL); + + if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) + gpio_free(SPI_MISO_GPIO); + if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) + gpio_free(SPI_MOSI_GPIO); + gpio_free(SPI_SCK_GPIO); + + return status; +} + +MODULE_ALIAS("platform:" DRIVER_NAME); + +static struct platform_driver spi_gpio_driver = { + .driver.name = DRIVER_NAME, + .driver.owner = THIS_MODULE, + .remove = __exit_p(spi_gpio_remove), +}; + +static int __init spi_gpio_init(void) +{ + return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe); +} +module_init(spi_gpio_init); + +static void __exit spi_gpio_exit(void) +{ + platform_driver_unregister(&spi_gpio_driver); +} +module_exit(spi_gpio_exit); + + +MODULE_DESCRIPTION("SPI master driver using generic bitbanged GPIO "); +MODULE_AUTHOR("David Brownell"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c new file mode 100644 index 000000000000..69d6dba67c19 --- /dev/null +++ b/drivers/spi/spi-imx.c @@ -0,0 +1,944 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 Juergen Beisert + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation + * 51 Franklin Street, Fifth Floor + * Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DRIVER_NAME "spi_imx" + +#define MXC_CSPIRXDATA 0x00 +#define MXC_CSPITXDATA 0x04 +#define MXC_CSPICTRL 0x08 +#define MXC_CSPIINT 0x0c +#define MXC_RESET 0x1c + +#define MX3_CSPISTAT 0x14 +#define MX3_CSPISTAT_RR (1 << 3) + +/* generic defines to abstract from the different register layouts */ +#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */ +#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */ + +struct spi_imx_config { + unsigned int speed_hz; + unsigned int bpw; + unsigned int mode; + u8 cs; +}; + +enum spi_imx_devtype { + SPI_IMX_VER_IMX1, + SPI_IMX_VER_0_0, + SPI_IMX_VER_0_4, + SPI_IMX_VER_0_5, + SPI_IMX_VER_0_7, + SPI_IMX_VER_2_3, +}; + +struct spi_imx_data; + +struct spi_imx_devtype_data { + void (*intctrl)(struct spi_imx_data *, int); + int (*config)(struct spi_imx_data *, struct spi_imx_config *); + void (*trigger)(struct spi_imx_data *); + int (*rx_available)(struct spi_imx_data *); + void (*reset)(struct spi_imx_data *); + unsigned int fifosize; +}; + +struct spi_imx_data { + struct spi_bitbang bitbang; + + struct completion xfer_done; + void *base; + int irq; + struct clk *clk; + unsigned long spi_clk; + int *chipselect; + + unsigned int count; + void (*tx)(struct spi_imx_data *); + void (*rx)(struct spi_imx_data *); + void *rx_buf; + const void *tx_buf; + unsigned int txfifo; /* number of words pushed in tx FIFO */ + + struct spi_imx_devtype_data devtype_data; +}; + +#define MXC_SPI_BUF_RX(type) \ +static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \ +{ \ + unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA); \ + \ + if (spi_imx->rx_buf) { \ + *(type *)spi_imx->rx_buf = val; \ + spi_imx->rx_buf += sizeof(type); \ + } \ +} + +#define MXC_SPI_BUF_TX(type) \ +static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx) \ +{ \ + type val = 0; \ + \ + if (spi_imx->tx_buf) { \ + val = *(type *)spi_imx->tx_buf; \ + spi_imx->tx_buf += sizeof(type); \ + } \ + \ + spi_imx->count -= sizeof(type); \ + \ + writel(val, spi_imx->base + MXC_CSPITXDATA); \ +} + +MXC_SPI_BUF_RX(u8) +MXC_SPI_BUF_TX(u8) +MXC_SPI_BUF_RX(u16) +MXC_SPI_BUF_TX(u16) +MXC_SPI_BUF_RX(u32) +MXC_SPI_BUF_TX(u32) + +/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set + * (which is currently not the case in this driver) + */ +static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192, + 256, 384, 512, 768, 1024}; + +/* MX21, MX27 */ +static unsigned int spi_imx_clkdiv_1(unsigned int fin, + unsigned int fspi) +{ + int i, max; + + if (cpu_is_mx21()) + max = 18; + else + max = 16; + + for (i = 2; i < max; i++) + if (fspi * mxc_clkdivs[i] >= fin) + return i; + + return max; +} + +/* MX1, MX31, MX35, MX51 CSPI */ +static unsigned int spi_imx_clkdiv_2(unsigned int fin, + unsigned int fspi) +{ + int i, div = 4; + + for (i = 0; i < 7; i++) { + if (fspi * div >= fin) + return i; + div <<= 1; + } + + return 7; +} + +#define SPI_IMX2_3_CTRL 0x08 +#define SPI_IMX2_3_CTRL_ENABLE (1 << 0) +#define SPI_IMX2_3_CTRL_XCH (1 << 2) +#define SPI_IMX2_3_CTRL_MODE_MASK (0xf << 4) +#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8 +#define SPI_IMX2_3_CTRL_PREDIV_OFFSET 12 +#define SPI_IMX2_3_CTRL_CS(cs) ((cs) << 18) +#define SPI_IMX2_3_CTRL_BL_OFFSET 20 + +#define SPI_IMX2_3_CONFIG 0x0c +#define SPI_IMX2_3_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0)) +#define SPI_IMX2_3_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4)) +#define SPI_IMX2_3_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8)) +#define SPI_IMX2_3_CONFIG_SSBPOL(cs) (1 << ((cs) + 12)) + +#define SPI_IMX2_3_INT 0x10 +#define SPI_IMX2_3_INT_TEEN (1 << 0) +#define SPI_IMX2_3_INT_RREN (1 << 3) + +#define SPI_IMX2_3_STAT 0x18 +#define SPI_IMX2_3_STAT_RR (1 << 3) + +/* MX51 eCSPI */ +static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi) +{ + /* + * there are two 4-bit dividers, the pre-divider divides by + * $pre, the post-divider by 2^$post + */ + unsigned int pre, post; + + if (unlikely(fspi > fin)) + return 0; + + post = fls(fin) - fls(fspi); + if (fin > fspi << post) + post++; + + /* now we have: (fin <= fspi << post) with post being minimal */ + + post = max(4U, post) - 4; + if (unlikely(post > 0xf)) { + pr_err("%s: cannot set clock freq: %u (base freq: %u)\n", + __func__, fspi, fin); + return 0xff; + } + + pre = DIV_ROUND_UP(fin, fspi << post) - 1; + + pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n", + __func__, fin, fspi, post, pre); + return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) | + (post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET); +} + +static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable) +{ + unsigned val = 0; + + if (enable & MXC_INT_TE) + val |= SPI_IMX2_3_INT_TEEN; + + if (enable & MXC_INT_RR) + val |= SPI_IMX2_3_INT_RREN; + + writel(val, spi_imx->base + SPI_IMX2_3_INT); +} + +static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx) +{ + u32 reg; + + reg = readl(spi_imx->base + SPI_IMX2_3_CTRL); + reg |= SPI_IMX2_3_CTRL_XCH; + writel(reg, spi_imx->base + SPI_IMX2_3_CTRL); +} + +static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) +{ + u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0; + + /* + * The hardware seems to have a race condition when changing modes. The + * current assumption is that the selection of the channel arrives + * earlier in the hardware than the mode bits when they are written at + * the same time. + * So set master mode for all channels as we do not support slave mode. + */ + ctrl |= SPI_IMX2_3_CTRL_MODE_MASK; + + /* set clock speed */ + ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz); + + /* set chip select to use */ + ctrl |= SPI_IMX2_3_CTRL_CS(config->cs); + + ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET; + + cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs); + + if (config->mode & SPI_CPHA) + cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs); + + if (config->mode & SPI_CPOL) + cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs); + + if (config->mode & SPI_CS_HIGH) + cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs); + + writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL); + writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG); + + return 0; +} + +static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx) +{ + return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR; +} + +static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx) +{ + /* drain receive buffer */ + while (spi_imx2_3_rx_available(spi_imx)) + readl(spi_imx->base + MXC_CSPIRXDATA); +} + +#define MX31_INTREG_TEEN (1 << 0) +#define MX31_INTREG_RREN (1 << 3) + +#define MX31_CSPICTRL_ENABLE (1 << 0) +#define MX31_CSPICTRL_MASTER (1 << 1) +#define MX31_CSPICTRL_XCH (1 << 2) +#define MX31_CSPICTRL_POL (1 << 4) +#define MX31_CSPICTRL_PHA (1 << 5) +#define MX31_CSPICTRL_SSCTL (1 << 6) +#define MX31_CSPICTRL_SSPOL (1 << 7) +#define MX31_CSPICTRL_BC_SHIFT 8 +#define MX35_CSPICTRL_BL_SHIFT 20 +#define MX31_CSPICTRL_CS_SHIFT 24 +#define MX35_CSPICTRL_CS_SHIFT 12 +#define MX31_CSPICTRL_DR_SHIFT 16 + +#define MX31_CSPISTATUS 0x14 +#define MX31_STATUS_RR (1 << 3) + +/* These functions also work for the i.MX35, but be aware that + * the i.MX35 has a slightly different register layout for bits + * we do not use here. + */ +static void __maybe_unused mx31_intctrl(struct spi_imx_data *spi_imx, int enable) +{ + unsigned int val = 0; + + if (enable & MXC_INT_TE) + val |= MX31_INTREG_TEEN; + if (enable & MXC_INT_RR) + val |= MX31_INTREG_RREN; + + writel(val, spi_imx->base + MXC_CSPIINT); +} + +static void __maybe_unused mx31_trigger(struct spi_imx_data *spi_imx) +{ + unsigned int reg; + + reg = readl(spi_imx->base + MXC_CSPICTRL); + reg |= MX31_CSPICTRL_XCH; + writel(reg, spi_imx->base + MXC_CSPICTRL); +} + +static int __maybe_unused spi_imx0_4_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) +{ + unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; + int cs = spi_imx->chipselect[config->cs]; + + reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << + MX31_CSPICTRL_DR_SHIFT; + + reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT; + + if (config->mode & SPI_CPHA) + reg |= MX31_CSPICTRL_PHA; + if (config->mode & SPI_CPOL) + reg |= MX31_CSPICTRL_POL; + if (config->mode & SPI_CS_HIGH) + reg |= MX31_CSPICTRL_SSPOL; + if (cs < 0) + reg |= (cs + 32) << MX31_CSPICTRL_CS_SHIFT; + + writel(reg, spi_imx->base + MXC_CSPICTRL); + + return 0; +} + +static int __maybe_unused spi_imx0_7_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) +{ + unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; + int cs = spi_imx->chipselect[config->cs]; + + reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << + MX31_CSPICTRL_DR_SHIFT; + + reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT; + reg |= MX31_CSPICTRL_SSCTL; + + if (config->mode & SPI_CPHA) + reg |= MX31_CSPICTRL_PHA; + if (config->mode & SPI_CPOL) + reg |= MX31_CSPICTRL_POL; + if (config->mode & SPI_CS_HIGH) + reg |= MX31_CSPICTRL_SSPOL; + if (cs < 0) + reg |= (cs + 32) << MX35_CSPICTRL_CS_SHIFT; + + writel(reg, spi_imx->base + MXC_CSPICTRL); + + return 0; +} + +static int __maybe_unused mx31_rx_available(struct spi_imx_data *spi_imx) +{ + return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR; +} + +static void __maybe_unused spi_imx0_4_reset(struct spi_imx_data *spi_imx) +{ + /* drain receive buffer */ + while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR) + readl(spi_imx->base + MXC_CSPIRXDATA); +} + +#define MX27_INTREG_RR (1 << 4) +#define MX27_INTREG_TEEN (1 << 9) +#define MX27_INTREG_RREN (1 << 13) + +#define MX27_CSPICTRL_POL (1 << 5) +#define MX27_CSPICTRL_PHA (1 << 6) +#define MX27_CSPICTRL_SSPOL (1 << 8) +#define MX27_CSPICTRL_XCH (1 << 9) +#define MX27_CSPICTRL_ENABLE (1 << 10) +#define MX27_CSPICTRL_MASTER (1 << 11) +#define MX27_CSPICTRL_DR_SHIFT 14 +#define MX27_CSPICTRL_CS_SHIFT 19 + +static void __maybe_unused mx27_intctrl(struct spi_imx_data *spi_imx, int enable) +{ + unsigned int val = 0; + + if (enable & MXC_INT_TE) + val |= MX27_INTREG_TEEN; + if (enable & MXC_INT_RR) + val |= MX27_INTREG_RREN; + + writel(val, spi_imx->base + MXC_CSPIINT); +} + +static void __maybe_unused mx27_trigger(struct spi_imx_data *spi_imx) +{ + unsigned int reg; + + reg = readl(spi_imx->base + MXC_CSPICTRL); + reg |= MX27_CSPICTRL_XCH; + writel(reg, spi_imx->base + MXC_CSPICTRL); +} + +static int __maybe_unused mx27_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) +{ + unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER; + int cs = spi_imx->chipselect[config->cs]; + + reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) << + MX27_CSPICTRL_DR_SHIFT; + reg |= config->bpw - 1; + + if (config->mode & SPI_CPHA) + reg |= MX27_CSPICTRL_PHA; + if (config->mode & SPI_CPOL) + reg |= MX27_CSPICTRL_POL; + if (config->mode & SPI_CS_HIGH) + reg |= MX27_CSPICTRL_SSPOL; + if (cs < 0) + reg |= (cs + 32) << MX27_CSPICTRL_CS_SHIFT; + + writel(reg, spi_imx->base + MXC_CSPICTRL); + + return 0; +} + +static int __maybe_unused mx27_rx_available(struct spi_imx_data *spi_imx) +{ + return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR; +} + +static void __maybe_unused spi_imx0_0_reset(struct spi_imx_data *spi_imx) +{ + writel(1, spi_imx->base + MXC_RESET); +} + +#define MX1_INTREG_RR (1 << 3) +#define MX1_INTREG_TEEN (1 << 8) +#define MX1_INTREG_RREN (1 << 11) + +#define MX1_CSPICTRL_POL (1 << 4) +#define MX1_CSPICTRL_PHA (1 << 5) +#define MX1_CSPICTRL_XCH (1 << 8) +#define MX1_CSPICTRL_ENABLE (1 << 9) +#define MX1_CSPICTRL_MASTER (1 << 10) +#define MX1_CSPICTRL_DR_SHIFT 13 + +static void __maybe_unused mx1_intctrl(struct spi_imx_data *spi_imx, int enable) +{ + unsigned int val = 0; + + if (enable & MXC_INT_TE) + val |= MX1_INTREG_TEEN; + if (enable & MXC_INT_RR) + val |= MX1_INTREG_RREN; + + writel(val, spi_imx->base + MXC_CSPIINT); +} + +static void __maybe_unused mx1_trigger(struct spi_imx_data *spi_imx) +{ + unsigned int reg; + + reg = readl(spi_imx->base + MXC_CSPICTRL); + reg |= MX1_CSPICTRL_XCH; + writel(reg, spi_imx->base + MXC_CSPICTRL); +} + +static int __maybe_unused mx1_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) +{ + unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER; + + reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << + MX1_CSPICTRL_DR_SHIFT; + reg |= config->bpw - 1; + + if (config->mode & SPI_CPHA) + reg |= MX1_CSPICTRL_PHA; + if (config->mode & SPI_CPOL) + reg |= MX1_CSPICTRL_POL; + + writel(reg, spi_imx->base + MXC_CSPICTRL); + + return 0; +} + +static int __maybe_unused mx1_rx_available(struct spi_imx_data *spi_imx) +{ + return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR; +} + +static void __maybe_unused mx1_reset(struct spi_imx_data *spi_imx) +{ + writel(1, spi_imx->base + MXC_RESET); +} + +/* + * These version numbers are taken from the Freescale driver. Unfortunately it + * doesn't support i.MX1, so this entry doesn't match the scheme. :-( + */ +static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = { +#ifdef CONFIG_SPI_IMX_VER_IMX1 + [SPI_IMX_VER_IMX1] = { + .intctrl = mx1_intctrl, + .config = mx1_config, + .trigger = mx1_trigger, + .rx_available = mx1_rx_available, + .reset = mx1_reset, + .fifosize = 8, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_0_0 + [SPI_IMX_VER_0_0] = { + .intctrl = mx27_intctrl, + .config = mx27_config, + .trigger = mx27_trigger, + .rx_available = mx27_rx_available, + .reset = spi_imx0_0_reset, + .fifosize = 8, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_0_4 + [SPI_IMX_VER_0_4] = { + .intctrl = mx31_intctrl, + .config = spi_imx0_4_config, + .trigger = mx31_trigger, + .rx_available = mx31_rx_available, + .reset = spi_imx0_4_reset, + .fifosize = 8, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_0_7 + [SPI_IMX_VER_0_7] = { + .intctrl = mx31_intctrl, + .config = spi_imx0_7_config, + .trigger = mx31_trigger, + .rx_available = mx31_rx_available, + .reset = spi_imx0_4_reset, + .fifosize = 8, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_2_3 + [SPI_IMX_VER_2_3] = { + .intctrl = spi_imx2_3_intctrl, + .config = spi_imx2_3_config, + .trigger = spi_imx2_3_trigger, + .rx_available = spi_imx2_3_rx_available, + .reset = spi_imx2_3_reset, + .fifosize = 64, + }, +#endif +}; + +static void spi_imx_chipselect(struct spi_device *spi, int is_active) +{ + struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); + int gpio = spi_imx->chipselect[spi->chip_select]; + int active = is_active != BITBANG_CS_INACTIVE; + int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH); + + if (gpio < 0) + return; + + gpio_set_value(gpio, dev_is_lowactive ^ active); +} + +static void spi_imx_push(struct spi_imx_data *spi_imx) +{ + while (spi_imx->txfifo < spi_imx->devtype_data.fifosize) { + if (!spi_imx->count) + break; + spi_imx->tx(spi_imx); + spi_imx->txfifo++; + } + + spi_imx->devtype_data.trigger(spi_imx); +} + +static irqreturn_t spi_imx_isr(int irq, void *dev_id) +{ + struct spi_imx_data *spi_imx = dev_id; + + while (spi_imx->devtype_data.rx_available(spi_imx)) { + spi_imx->rx(spi_imx); + spi_imx->txfifo--; + } + + if (spi_imx->count) { + spi_imx_push(spi_imx); + return IRQ_HANDLED; + } + + if (spi_imx->txfifo) { + /* No data left to push, but still waiting for rx data, + * enable receive data available interrupt. + */ + spi_imx->devtype_data.intctrl( + spi_imx, MXC_INT_RR); + return IRQ_HANDLED; + } + + spi_imx->devtype_data.intctrl(spi_imx, 0); + complete(&spi_imx->xfer_done); + + return IRQ_HANDLED; +} + +static int spi_imx_setupxfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); + struct spi_imx_config config; + + config.bpw = t ? t->bits_per_word : spi->bits_per_word; + config.speed_hz = t ? t->speed_hz : spi->max_speed_hz; + config.mode = spi->mode; + config.cs = spi->chip_select; + + if (!config.speed_hz) + config.speed_hz = spi->max_speed_hz; + if (!config.bpw) + config.bpw = spi->bits_per_word; + if (!config.speed_hz) + config.speed_hz = spi->max_speed_hz; + + /* Initialize the functions for transfer */ + if (config.bpw <= 8) { + spi_imx->rx = spi_imx_buf_rx_u8; + spi_imx->tx = spi_imx_buf_tx_u8; + } else if (config.bpw <= 16) { + spi_imx->rx = spi_imx_buf_rx_u16; + spi_imx->tx = spi_imx_buf_tx_u16; + } else if (config.bpw <= 32) { + spi_imx->rx = spi_imx_buf_rx_u32; + spi_imx->tx = spi_imx_buf_tx_u32; + } else + BUG(); + + spi_imx->devtype_data.config(spi_imx, &config); + + return 0; +} + +static int spi_imx_transfer(struct spi_device *spi, + struct spi_transfer *transfer) +{ + struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); + + spi_imx->tx_buf = transfer->tx_buf; + spi_imx->rx_buf = transfer->rx_buf; + spi_imx->count = transfer->len; + spi_imx->txfifo = 0; + + init_completion(&spi_imx->xfer_done); + + spi_imx_push(spi_imx); + + spi_imx->devtype_data.intctrl(spi_imx, MXC_INT_TE); + + wait_for_completion(&spi_imx->xfer_done); + + return transfer->len; +} + +static int spi_imx_setup(struct spi_device *spi) +{ + struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); + int gpio = spi_imx->chipselect[spi->chip_select]; + + dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__, + spi->mode, spi->bits_per_word, spi->max_speed_hz); + + if (gpio >= 0) + gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1); + + spi_imx_chipselect(spi, BITBANG_CS_INACTIVE); + + return 0; +} + +static void spi_imx_cleanup(struct spi_device *spi) +{ +} + +static struct platform_device_id spi_imx_devtype[] = { + { + .name = "imx1-cspi", + .driver_data = SPI_IMX_VER_IMX1, + }, { + .name = "imx21-cspi", + .driver_data = SPI_IMX_VER_0_0, + }, { + .name = "imx25-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx27-cspi", + .driver_data = SPI_IMX_VER_0_0, + }, { + .name = "imx31-cspi", + .driver_data = SPI_IMX_VER_0_4, + }, { + .name = "imx35-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx51-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx51-ecspi", + .driver_data = SPI_IMX_VER_2_3, + }, { + .name = "imx53-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx53-ecspi", + .driver_data = SPI_IMX_VER_2_3, + }, { + /* sentinel */ + } +}; + +static int __devinit spi_imx_probe(struct platform_device *pdev) +{ + struct spi_imx_master *mxc_platform_info; + struct spi_master *master; + struct spi_imx_data *spi_imx; + struct resource *res; + int i, ret; + + mxc_platform_info = dev_get_platdata(&pdev->dev); + if (!mxc_platform_info) { + dev_err(&pdev->dev, "can't get the platform data\n"); + return -EINVAL; + } + + master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data)); + if (!master) + return -ENOMEM; + + platform_set_drvdata(pdev, master); + + master->bus_num = pdev->id; + master->num_chipselect = mxc_platform_info->num_chipselect; + + spi_imx = spi_master_get_devdata(master); + spi_imx->bitbang.master = spi_master_get(master); + spi_imx->chipselect = mxc_platform_info->chipselect; + + for (i = 0; i < master->num_chipselect; i++) { + if (spi_imx->chipselect[i] < 0) + continue; + ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME); + if (ret) { + while (i > 0) { + i--; + if (spi_imx->chipselect[i] >= 0) + gpio_free(spi_imx->chipselect[i]); + } + dev_err(&pdev->dev, "can't get cs gpios\n"); + goto out_master_put; + } + } + + spi_imx->bitbang.chipselect = spi_imx_chipselect; + spi_imx->bitbang.setup_transfer = spi_imx_setupxfer; + spi_imx->bitbang.txrx_bufs = spi_imx_transfer; + spi_imx->bitbang.master->setup = spi_imx_setup; + spi_imx->bitbang.master->cleanup = spi_imx_cleanup; + spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + init_completion(&spi_imx->xfer_done); + + spi_imx->devtype_data = + spi_imx_devtype_data[pdev->id_entry->driver_data]; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "can't get platform resource\n"); + ret = -ENOMEM; + goto out_gpio_free; + } + + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "request_mem_region failed\n"); + ret = -EBUSY; + goto out_gpio_free; + } + + spi_imx->base = ioremap(res->start, resource_size(res)); + if (!spi_imx->base) { + ret = -EINVAL; + goto out_release_mem; + } + + spi_imx->irq = platform_get_irq(pdev, 0); + if (spi_imx->irq < 0) { + ret = -EINVAL; + goto out_iounmap; + } + + ret = request_irq(spi_imx->irq, spi_imx_isr, 0, DRIVER_NAME, spi_imx); + if (ret) { + dev_err(&pdev->dev, "can't get irq%d: %d\n", spi_imx->irq, ret); + goto out_iounmap; + } + + spi_imx->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(spi_imx->clk)) { + dev_err(&pdev->dev, "unable to get clock\n"); + ret = PTR_ERR(spi_imx->clk); + goto out_free_irq; + } + + clk_enable(spi_imx->clk); + spi_imx->spi_clk = clk_get_rate(spi_imx->clk); + + spi_imx->devtype_data.reset(spi_imx); + + spi_imx->devtype_data.intctrl(spi_imx, 0); + + ret = spi_bitbang_start(&spi_imx->bitbang); + if (ret) { + dev_err(&pdev->dev, "bitbang start failed with %d\n", ret); + goto out_clk_put; + } + + dev_info(&pdev->dev, "probed\n"); + + return ret; + +out_clk_put: + clk_disable(spi_imx->clk); + clk_put(spi_imx->clk); +out_free_irq: + free_irq(spi_imx->irq, spi_imx); +out_iounmap: + iounmap(spi_imx->base); +out_release_mem: + release_mem_region(res->start, resource_size(res)); +out_gpio_free: + for (i = 0; i < master->num_chipselect; i++) + if (spi_imx->chipselect[i] >= 0) + gpio_free(spi_imx->chipselect[i]); +out_master_put: + spi_master_put(master); + kfree(master); + platform_set_drvdata(pdev, NULL); + return ret; +} + +static int __devexit spi_imx_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct spi_imx_data *spi_imx = spi_master_get_devdata(master); + int i; + + spi_bitbang_stop(&spi_imx->bitbang); + + writel(0, spi_imx->base + MXC_CSPICTRL); + clk_disable(spi_imx->clk); + clk_put(spi_imx->clk); + free_irq(spi_imx->irq, spi_imx); + iounmap(spi_imx->base); + + for (i = 0; i < master->num_chipselect; i++) + if (spi_imx->chipselect[i] >= 0) + gpio_free(spi_imx->chipselect[i]); + + spi_master_put(master); + + release_mem_region(res->start, resource_size(res)); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver spi_imx_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .id_table = spi_imx_devtype, + .probe = spi_imx_probe, + .remove = __devexit_p(spi_imx_remove), +}; + +static int __init spi_imx_init(void) +{ + return platform_driver_register(&spi_imx_driver); +} + +static void __exit spi_imx_exit(void) +{ + platform_driver_unregister(&spi_imx_driver); +} + +module_init(spi_imx_init); +module_exit(spi_imx_exit); + +MODULE_DESCRIPTION("SPI Master Controller driver"); +MODULE_AUTHOR("Sascha Hauer, Pengutronix"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-lm70llp.c b/drivers/spi/spi-lm70llp.c new file mode 100644 index 000000000000..933eb9d9ddd4 --- /dev/null +++ b/drivers/spi/spi-lm70llp.c @@ -0,0 +1,351 @@ +/* + * Driver for LM70EVAL-LLP board for the LM70 sensor + * + * Copyright (C) 2006 Kaiwan N Billimoria + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +#include +#include + + +/* + * The LM70 communicates with a host processor using a 3-wire variant of + * the SPI/Microwire bus interface. This driver specifically supports an + * NS LM70 LLP Evaluation Board, interfacing to a PC using its parallel + * port to bitbang an SPI-parport bridge. Accordingly, this is an SPI + * master controller driver. The hwmon/lm70 driver is a "SPI protocol + * driver", layered on top of this one and usable without the lm70llp. + * + * Datasheet and Schematic: + * The LM70 is a temperature sensor chip from National Semiconductor; its + * datasheet is available at http://www.national.com/pf/LM/LM70.html + * The schematic for this particular board (the LM70EVAL-LLP) is + * available (on page 4) here: + * http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf + * + * Also see Documentation/spi/spi-lm70llp. The SPI<->parport code here is + * (heavily) based on spi-butterfly by David Brownell. + * + * The LM70 LLP connects to the PC parallel port in the following manner: + * + * Parallel LM70 LLP + * Port Direction JP2 Header + * ----------- --------- ------------ + * D0 2 - - + * D1 3 --> V+ 5 + * D2 4 --> V+ 5 + * D3 5 --> V+ 5 + * D4 6 --> V+ 5 + * D5 7 --> nCS 8 + * D6 8 --> SCLK 3 + * D7 9 --> SI/O 5 + * GND 25 - GND 7 + * Select 13 <-- SI/O 1 + * + * Note that parport pin 13 actually gets inverted by the transistor + * arrangement which lets either the parport or the LM70 drive the + * SI/SO signal (see the schematic for details). + */ + +#define DRVNAME "spi-lm70llp" + +#define lm70_INIT 0xBE +#define SIO 0x10 +#define nCS 0x20 +#define SCLK 0x40 + +/*-------------------------------------------------------------------------*/ + +struct spi_lm70llp { + struct spi_bitbang bitbang; + struct parport *port; + struct pardevice *pd; + struct spi_device *spidev_lm70; + struct spi_board_info info; + //struct device *dev; +}; + +/* REVISIT : ugly global ; provides "exclusive open" facility */ +static struct spi_lm70llp *lm70llp; + + +/*-------------------------------------------------------------------*/ + +static inline struct spi_lm70llp *spidev_to_pp(struct spi_device *spi) +{ + return spi->controller_data; +} + +/*---------------------- LM70 LLP eval board-specific inlines follow */ + +/* NOTE: we don't actually need to reread the output values, since they'll + * still be what we wrote before. Plus, going through parport builds in + * a ~1ms/operation delay; these SPI transfers could easily be faster. + */ + +static inline void deassertCS(struct spi_lm70llp *pp) +{ + u8 data = parport_read_data(pp->port); + + data &= ~0x80; /* pull D7/SI-out low while de-asserted */ + parport_write_data(pp->port, data | nCS); +} + +static inline void assertCS(struct spi_lm70llp *pp) +{ + u8 data = parport_read_data(pp->port); + + data |= 0x80; /* pull D7/SI-out high so lm70 drives SO-in */ + parport_write_data(pp->port, data & ~nCS); +} + +static inline void clkHigh(struct spi_lm70llp *pp) +{ + u8 data = parport_read_data(pp->port); + parport_write_data(pp->port, data | SCLK); +} + +static inline void clkLow(struct spi_lm70llp *pp) +{ + u8 data = parport_read_data(pp->port); + parport_write_data(pp->port, data & ~SCLK); +} + +/*------------------------- SPI-LM70-specific inlines ----------------------*/ + +static inline void spidelay(unsigned d) +{ + udelay(d); +} + +static inline void setsck(struct spi_device *s, int is_on) +{ + struct spi_lm70llp *pp = spidev_to_pp(s); + + if (is_on) + clkHigh(pp); + else + clkLow(pp); +} + +static inline void setmosi(struct spi_device *s, int is_on) +{ + /* FIXME update D7 ... this way we can put the chip + * into shutdown mode and read the manufacturer ID, + * but we can't put it back into operational mode. + */ +} + +/* + * getmiso: + * Why do we return 0 when the SIO line is high and vice-versa? + * The fact is, the lm70 eval board from NS (which this driver drives), + * is wired in just such a way : when the lm70's SIO goes high, a transistor + * switches it to low reflecting this on the parport (pin 13), and vice-versa. + */ +static inline int getmiso(struct spi_device *s) +{ + struct spi_lm70llp *pp = spidev_to_pp(s); + return ((SIO == (parport_read_status(pp->port) & SIO)) ? 0 : 1 ); +} +/*--------------------------------------------------------------------*/ + +#include "spi-bitbang-txrx.h" + +static void lm70_chipselect(struct spi_device *spi, int value) +{ + struct spi_lm70llp *pp = spidev_to_pp(spi); + + if (value) + assertCS(pp); + else + deassertCS(pp); +} + +/* + * Our actual bitbanger routine. + */ +static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); +} + +static void spi_lm70llp_attach(struct parport *p) +{ + struct pardevice *pd; + struct spi_lm70llp *pp; + struct spi_master *master; + int status; + + if (lm70llp) { + printk(KERN_WARNING + "%s: spi_lm70llp instance already loaded. Aborting.\n", + DRVNAME); + return; + } + + /* TODO: this just _assumes_ a lm70 is there ... no probe; + * the lm70 driver could verify it, reading the manf ID. + */ + + master = spi_alloc_master(p->physport->dev, sizeof *pp); + if (!master) { + status = -ENOMEM; + goto out_fail; + } + pp = spi_master_get_devdata(master); + + master->bus_num = -1; /* dynamic alloc of a bus number */ + master->num_chipselect = 1; + + /* + * SPI and bitbang hookup. + */ + pp->bitbang.master = spi_master_get(master); + pp->bitbang.chipselect = lm70_chipselect; + pp->bitbang.txrx_word[SPI_MODE_0] = lm70_txrx; + pp->bitbang.flags = SPI_3WIRE; + + /* + * Parport hookup + */ + pp->port = p; + pd = parport_register_device(p, DRVNAME, + NULL, NULL, NULL, + PARPORT_FLAG_EXCL, pp); + if (!pd) { + status = -ENOMEM; + goto out_free_master; + } + pp->pd = pd; + + status = parport_claim(pd); + if (status < 0) + goto out_parport_unreg; + + /* + * Start SPI ... + */ + status = spi_bitbang_start(&pp->bitbang); + if (status < 0) { + printk(KERN_WARNING + "%s: spi_bitbang_start failed with status %d\n", + DRVNAME, status); + goto out_off_and_release; + } + + /* + * The modalias name MUST match the device_driver name + * for the bus glue code to match and subsequently bind them. + * We are binding to the generic drivers/hwmon/lm70.c device + * driver. + */ + strcpy(pp->info.modalias, "lm70"); + pp->info.max_speed_hz = 6 * 1000 * 1000; + pp->info.chip_select = 0; + pp->info.mode = SPI_3WIRE | SPI_MODE_0; + + /* power up the chip, and let the LM70 control SI/SO */ + parport_write_data(pp->port, lm70_INIT); + + /* Enable access to our primary data structure via + * the board info's (void *)controller_data. + */ + pp->info.controller_data = pp; + pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info); + if (pp->spidev_lm70) + dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n", + dev_name(&pp->spidev_lm70->dev)); + else { + printk(KERN_WARNING "%s: spi_new_device failed\n", DRVNAME); + status = -ENODEV; + goto out_bitbang_stop; + } + pp->spidev_lm70->bits_per_word = 8; + + lm70llp = pp; + return; + +out_bitbang_stop: + spi_bitbang_stop(&pp->bitbang); +out_off_and_release: + /* power down */ + parport_write_data(pp->port, 0); + mdelay(10); + parport_release(pp->pd); +out_parport_unreg: + parport_unregister_device(pd); +out_free_master: + (void) spi_master_put(master); +out_fail: + pr_info("%s: spi_lm70llp probe fail, status %d\n", DRVNAME, status); +} + +static void spi_lm70llp_detach(struct parport *p) +{ + struct spi_lm70llp *pp; + + if (!lm70llp || lm70llp->port != p) + return; + + pp = lm70llp; + spi_bitbang_stop(&pp->bitbang); + + /* power down */ + parport_write_data(pp->port, 0); + + parport_release(pp->pd); + parport_unregister_device(pp->pd); + + (void) spi_master_put(pp->bitbang.master); + + lm70llp = NULL; +} + + +static struct parport_driver spi_lm70llp_drv = { + .name = DRVNAME, + .attach = spi_lm70llp_attach, + .detach = spi_lm70llp_detach, +}; + +static int __init init_spi_lm70llp(void) +{ + return parport_register_driver(&spi_lm70llp_drv); +} +module_init(init_spi_lm70llp); + +static void __exit cleanup_spi_lm70llp(void) +{ + parport_unregister_driver(&spi_lm70llp_drv); +} +module_exit(cleanup_spi_lm70llp); + +MODULE_AUTHOR("Kaiwan N Billimoria "); +MODULE_DESCRIPTION( + "Parport adapter for the National Semiconductor LM70 LLP eval board"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c new file mode 100644 index 000000000000..6a5b4238fb6b --- /dev/null +++ b/drivers/spi/spi-mpc512x-psc.c @@ -0,0 +1,577 @@ +/* + * MPC512x PSC in SPI mode driver. + * + * Copyright (C) 2007,2008 Freescale Semiconductor Inc. + * Original port from 52xx driver: + * Hongjun Chen + * + * Fork of mpc52xx_psc_spi.c: + * Copyright (C) 2006 TOPTICA Photonics AG., Dragos Carp + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct mpc512x_psc_spi { + void (*cs_control)(struct spi_device *spi, bool on); + u32 sysclk; + + /* driver internal data */ + struct mpc52xx_psc __iomem *psc; + struct mpc512x_psc_fifo __iomem *fifo; + unsigned int irq; + u8 bits_per_word; + u8 busy; + u32 mclk; + u8 eofbyte; + + struct workqueue_struct *workqueue; + struct work_struct work; + + struct list_head queue; + spinlock_t lock; /* Message queue lock */ + + struct completion done; +}; + +/* controller state */ +struct mpc512x_psc_spi_cs { + int bits_per_word; + int speed_hz; +}; + +/* set clock freq, clock ramp, bits per work + * if t is NULL then reset the values to the default values + */ +static int mpc512x_psc_spi_transfer_setup(struct spi_device *spi, + struct spi_transfer *t) +{ + struct mpc512x_psc_spi_cs *cs = spi->controller_state; + + cs->speed_hz = (t && t->speed_hz) + ? t->speed_hz : spi->max_speed_hz; + cs->bits_per_word = (t && t->bits_per_word) + ? t->bits_per_word : spi->bits_per_word; + cs->bits_per_word = ((cs->bits_per_word + 7) / 8) * 8; + return 0; +} + +static void mpc512x_psc_spi_activate_cs(struct spi_device *spi) +{ + struct mpc512x_psc_spi_cs *cs = spi->controller_state; + struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master); + struct mpc52xx_psc __iomem *psc = mps->psc; + u32 sicr; + u32 ccr; + u16 bclkdiv; + + sicr = in_be32(&psc->sicr); + + /* Set clock phase and polarity */ + if (spi->mode & SPI_CPHA) + sicr |= 0x00001000; + else + sicr &= ~0x00001000; + + if (spi->mode & SPI_CPOL) + sicr |= 0x00002000; + else + sicr &= ~0x00002000; + + if (spi->mode & SPI_LSB_FIRST) + sicr |= 0x10000000; + else + sicr &= ~0x10000000; + out_be32(&psc->sicr, sicr); + + ccr = in_be32(&psc->ccr); + ccr &= 0xFF000000; + if (cs->speed_hz) + bclkdiv = (mps->mclk / cs->speed_hz) - 1; + else + bclkdiv = (mps->mclk / 1000000) - 1; /* default 1MHz */ + + ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8)); + out_be32(&psc->ccr, ccr); + mps->bits_per_word = cs->bits_per_word; + + if (mps->cs_control) + mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 1 : 0); +} + +static void mpc512x_psc_spi_deactivate_cs(struct spi_device *spi) +{ + struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master); + + if (mps->cs_control) + mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 0 : 1); + +} + +/* extract and scale size field in txsz or rxsz */ +#define MPC512x_PSC_FIFO_SZ(sz) ((sz & 0x7ff) << 2); + +#define EOFBYTE 1 + +static int mpc512x_psc_spi_transfer_rxtx(struct spi_device *spi, + struct spi_transfer *t) +{ + struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master); + struct mpc52xx_psc __iomem *psc = mps->psc; + struct mpc512x_psc_fifo __iomem *fifo = mps->fifo; + size_t len = t->len; + u8 *tx_buf = (u8 *)t->tx_buf; + u8 *rx_buf = (u8 *)t->rx_buf; + + if (!tx_buf && !rx_buf && t->len) + return -EINVAL; + + /* Zero MR2 */ + in_8(&psc->mode); + out_8(&psc->mode, 0x0); + + while (len) { + int count; + int i; + u8 data; + size_t fifosz; + int rxcount; + + /* + * The number of bytes that can be sent at a time + * depends on the fifo size. + */ + fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->txsz)); + count = min(fifosz, len); + + for (i = count; i > 0; i--) { + data = tx_buf ? *tx_buf++ : 0; + if (len == EOFBYTE) + setbits32(&fifo->txcmd, MPC512x_PSC_FIFO_EOF); + out_8(&fifo->txdata_8, data); + len--; + } + + INIT_COMPLETION(mps->done); + + /* interrupt on tx fifo empty */ + out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY); + out_be32(&fifo->tximr, MPC512x_PSC_FIFO_EMPTY); + + /* enable transmiter/receiver */ + out_8(&psc->command, + MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE); + + wait_for_completion(&mps->done); + + mdelay(1); + + /* rx fifo should have count bytes in it */ + rxcount = in_be32(&fifo->rxcnt); + if (rxcount != count) + mdelay(1); + + rxcount = in_be32(&fifo->rxcnt); + if (rxcount != count) { + dev_warn(&spi->dev, "expected %d bytes in rx fifo " + "but got %d\n", count, rxcount); + } + + rxcount = min(rxcount, count); + for (i = rxcount; i > 0; i--) { + data = in_8(&fifo->rxdata_8); + if (rx_buf) + *rx_buf++ = data; + } + while (in_be32(&fifo->rxcnt)) { + in_8(&fifo->rxdata_8); + } + + out_8(&psc->command, + MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE); + } + /* disable transmiter/receiver and fifo interrupt */ + out_8(&psc->command, MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE); + out_be32(&fifo->tximr, 0); + return 0; +} + +static void mpc512x_psc_spi_work(struct work_struct *work) +{ + struct mpc512x_psc_spi *mps = container_of(work, + struct mpc512x_psc_spi, + work); + + spin_lock_irq(&mps->lock); + mps->busy = 1; + while (!list_empty(&mps->queue)) { + struct spi_message *m; + struct spi_device *spi; + struct spi_transfer *t = NULL; + unsigned cs_change; + int status; + + m = container_of(mps->queue.next, struct spi_message, queue); + list_del_init(&m->queue); + spin_unlock_irq(&mps->lock); + + spi = m->spi; + cs_change = 1; + status = 0; + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->bits_per_word || t->speed_hz) { + status = mpc512x_psc_spi_transfer_setup(spi, t); + if (status < 0) + break; + } + + if (cs_change) + mpc512x_psc_spi_activate_cs(spi); + cs_change = t->cs_change; + + status = mpc512x_psc_spi_transfer_rxtx(spi, t); + if (status) + break; + m->actual_length += t->len; + + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (cs_change) + mpc512x_psc_spi_deactivate_cs(spi); + } + + m->status = status; + m->complete(m->context); + + if (status || !cs_change) + mpc512x_psc_spi_deactivate_cs(spi); + + mpc512x_psc_spi_transfer_setup(spi, NULL); + + spin_lock_irq(&mps->lock); + } + mps->busy = 0; + spin_unlock_irq(&mps->lock); +} + +static int mpc512x_psc_spi_setup(struct spi_device *spi) +{ + struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master); + struct mpc512x_psc_spi_cs *cs = spi->controller_state; + unsigned long flags; + + if (spi->bits_per_word % 8) + return -EINVAL; + + if (!cs) { + cs = kzalloc(sizeof *cs, GFP_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + + cs->bits_per_word = spi->bits_per_word; + cs->speed_hz = spi->max_speed_hz; + + spin_lock_irqsave(&mps->lock, flags); + if (!mps->busy) + mpc512x_psc_spi_deactivate_cs(spi); + spin_unlock_irqrestore(&mps->lock, flags); + + return 0; +} + +static int mpc512x_psc_spi_transfer(struct spi_device *spi, + struct spi_message *m) +{ + struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master); + unsigned long flags; + + m->actual_length = 0; + m->status = -EINPROGRESS; + + spin_lock_irqsave(&mps->lock, flags); + list_add_tail(&m->queue, &mps->queue); + queue_work(mps->workqueue, &mps->work); + spin_unlock_irqrestore(&mps->lock, flags); + + return 0; +} + +static void mpc512x_psc_spi_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} + +static int mpc512x_psc_spi_port_config(struct spi_master *master, + struct mpc512x_psc_spi *mps) +{ + struct mpc52xx_psc __iomem *psc = mps->psc; + struct mpc512x_psc_fifo __iomem *fifo = mps->fifo; + struct clk *spiclk; + int ret = 0; + char name[32]; + u32 sicr; + u32 ccr; + u16 bclkdiv; + + sprintf(name, "psc%d_mclk", master->bus_num); + spiclk = clk_get(&master->dev, name); + clk_enable(spiclk); + mps->mclk = clk_get_rate(spiclk); + clk_put(spiclk); + + /* Reset the PSC into a known state */ + out_8(&psc->command, MPC52xx_PSC_RST_RX); + out_8(&psc->command, MPC52xx_PSC_RST_TX); + out_8(&psc->command, MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE); + + /* Disable psc interrupts all useful interrupts are in fifo */ + out_be16(&psc->isr_imr.imr, 0); + + /* Disable fifo interrupts, will be enabled later */ + out_be32(&fifo->tximr, 0); + out_be32(&fifo->rximr, 0); + + /* Setup fifo slice address and size */ + /*out_be32(&fifo->txsz, 0x0fe00004);*/ + /*out_be32(&fifo->rxsz, 0x0ff00004);*/ + + sicr = 0x01000000 | /* SIM = 0001 -- 8 bit */ + 0x00800000 | /* GenClk = 1 -- internal clk */ + 0x00008000 | /* SPI = 1 */ + 0x00004000 | /* MSTR = 1 -- SPI master */ + 0x00000800; /* UseEOF = 1 -- SS low until EOF */ + + out_be32(&psc->sicr, sicr); + + ccr = in_be32(&psc->ccr); + ccr &= 0xFF000000; + bclkdiv = (mps->mclk / 1000000) - 1; /* default 1MHz */ + ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8)); + out_be32(&psc->ccr, ccr); + + /* Set 2ms DTL delay */ + out_8(&psc->ctur, 0x00); + out_8(&psc->ctlr, 0x82); + + /* we don't use the alarms */ + out_be32(&fifo->rxalarm, 0xfff); + out_be32(&fifo->txalarm, 0); + + /* Enable FIFO slices for Rx/Tx */ + out_be32(&fifo->rxcmd, + MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA); + out_be32(&fifo->txcmd, + MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA); + + mps->bits_per_word = 8; + + return ret; +} + +static irqreturn_t mpc512x_psc_spi_isr(int irq, void *dev_id) +{ + struct mpc512x_psc_spi *mps = (struct mpc512x_psc_spi *)dev_id; + struct mpc512x_psc_fifo __iomem *fifo = mps->fifo; + + /* clear interrupt and wake up the work queue */ + if (in_be32(&fifo->txisr) & + in_be32(&fifo->tximr) & MPC512x_PSC_FIFO_EMPTY) { + out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY); + out_be32(&fifo->tximr, 0); + complete(&mps->done); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +/* bus_num is used only for the case dev->platform_data == NULL */ +static int __devinit mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr, + u32 size, unsigned int irq, + s16 bus_num) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct mpc512x_psc_spi *mps; + struct spi_master *master; + int ret; + void *tempp; + + master = spi_alloc_master(dev, sizeof *mps); + if (master == NULL) + return -ENOMEM; + + dev_set_drvdata(dev, master); + mps = spi_master_get_devdata(master); + mps->irq = irq; + + if (pdata == NULL) { + dev_err(dev, "probe called without platform data, no " + "cs_control function will be called\n"); + mps->cs_control = NULL; + mps->sysclk = 0; + master->bus_num = bus_num; + master->num_chipselect = 255; + } else { + mps->cs_control = pdata->cs_control; + mps->sysclk = pdata->sysclk; + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->max_chipselect; + } + + master->setup = mpc512x_psc_spi_setup; + master->transfer = mpc512x_psc_spi_transfer; + master->cleanup = mpc512x_psc_spi_cleanup; + master->dev.of_node = dev->of_node; + + tempp = ioremap(regaddr, size); + if (!tempp) { + dev_err(dev, "could not ioremap I/O port range\n"); + ret = -EFAULT; + goto free_master; + } + mps->psc = tempp; + mps->fifo = + (struct mpc512x_psc_fifo *)(tempp + sizeof(struct mpc52xx_psc)); + + ret = request_irq(mps->irq, mpc512x_psc_spi_isr, IRQF_SHARED, + "mpc512x-psc-spi", mps); + if (ret) + goto free_master; + + ret = mpc512x_psc_spi_port_config(master, mps); + if (ret < 0) + goto free_irq; + + spin_lock_init(&mps->lock); + init_completion(&mps->done); + INIT_WORK(&mps->work, mpc512x_psc_spi_work); + INIT_LIST_HEAD(&mps->queue); + + mps->workqueue = + create_singlethread_workqueue(dev_name(master->dev.parent)); + if (mps->workqueue == NULL) { + ret = -EBUSY; + goto free_irq; + } + + ret = spi_register_master(master); + if (ret < 0) + goto unreg_master; + + return ret; + +unreg_master: + destroy_workqueue(mps->workqueue); +free_irq: + free_irq(mps->irq, mps); +free_master: + if (mps->psc) + iounmap(mps->psc); + spi_master_put(master); + + return ret; +} + +static int __devexit mpc512x_psc_spi_do_remove(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct mpc512x_psc_spi *mps = spi_master_get_devdata(master); + + flush_workqueue(mps->workqueue); + destroy_workqueue(mps->workqueue); + spi_unregister_master(master); + free_irq(mps->irq, mps); + if (mps->psc) + iounmap(mps->psc); + + return 0; +} + +static int __devinit mpc512x_psc_spi_of_probe(struct platform_device *op) +{ + const u32 *regaddr_p; + u64 regaddr64, size64; + s16 id = -1; + + regaddr_p = of_get_address(op->dev.of_node, 0, &size64, NULL); + if (!regaddr_p) { + dev_err(&op->dev, "Invalid PSC address\n"); + return -EINVAL; + } + regaddr64 = of_translate_address(op->dev.of_node, regaddr_p); + + /* get PSC id (0..11, used by port_config) */ + if (op->dev.platform_data == NULL) { + const u32 *psc_nump; + + psc_nump = of_get_property(op->dev.of_node, "cell-index", NULL); + if (!psc_nump || *psc_nump > 11) { + dev_err(&op->dev, "mpc512x_psc_spi: Device node %s " + "has invalid cell-index property\n", + op->dev.of_node->full_name); + return -EINVAL; + } + id = *psc_nump; + } + + return mpc512x_psc_spi_do_probe(&op->dev, (u32) regaddr64, (u32) size64, + irq_of_parse_and_map(op->dev.of_node, 0), id); +} + +static int __devexit mpc512x_psc_spi_of_remove(struct platform_device *op) +{ + return mpc512x_psc_spi_do_remove(&op->dev); +} + +static struct of_device_id mpc512x_psc_spi_of_match[] = { + { .compatible = "fsl,mpc5121-psc-spi", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, mpc512x_psc_spi_of_match); + +static struct platform_driver mpc512x_psc_spi_of_driver = { + .probe = mpc512x_psc_spi_of_probe, + .remove = __devexit_p(mpc512x_psc_spi_of_remove), + .driver = { + .name = "mpc512x-psc-spi", + .owner = THIS_MODULE, + .of_match_table = mpc512x_psc_spi_of_match, + }, +}; + +static int __init mpc512x_psc_spi_init(void) +{ + return platform_driver_register(&mpc512x_psc_spi_of_driver); +} +module_init(mpc512x_psc_spi_init); + +static void __exit mpc512x_psc_spi_exit(void) +{ + platform_driver_unregister(&mpc512x_psc_spi_of_driver); +} +module_exit(mpc512x_psc_spi_exit); + +MODULE_AUTHOR("John Rigby"); +MODULE_DESCRIPTION("MPC512x PSC SPI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-mpc52xx-psc.c b/drivers/spi/spi-mpc52xx-psc.c new file mode 100644 index 000000000000..e30baf0852ac --- /dev/null +++ b/drivers/spi/spi-mpc52xx-psc.c @@ -0,0 +1,529 @@ +/* + * MPC52xx PSC in SPI mode driver. + * + * Maintainer: Dragos Carp + * + * Copyright (C) 2006 TOPTICA Photonics AG. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define MCLK 20000000 /* PSC port MClk in hz */ + +struct mpc52xx_psc_spi { + /* fsl_spi_platform data */ + void (*cs_control)(struct spi_device *spi, bool on); + u32 sysclk; + + /* driver internal data */ + struct mpc52xx_psc __iomem *psc; + struct mpc52xx_psc_fifo __iomem *fifo; + unsigned int irq; + u8 bits_per_word; + u8 busy; + + struct workqueue_struct *workqueue; + struct work_struct work; + + struct list_head queue; + spinlock_t lock; + + struct completion done; +}; + +/* controller state */ +struct mpc52xx_psc_spi_cs { + int bits_per_word; + int speed_hz; +}; + +/* set clock freq, clock ramp, bits per work + * if t is NULL then reset the values to the default values + */ +static int mpc52xx_psc_spi_transfer_setup(struct spi_device *spi, + struct spi_transfer *t) +{ + struct mpc52xx_psc_spi_cs *cs = spi->controller_state; + + cs->speed_hz = (t && t->speed_hz) + ? t->speed_hz : spi->max_speed_hz; + cs->bits_per_word = (t && t->bits_per_word) + ? t->bits_per_word : spi->bits_per_word; + cs->bits_per_word = ((cs->bits_per_word + 7) / 8) * 8; + return 0; +} + +static void mpc52xx_psc_spi_activate_cs(struct spi_device *spi) +{ + struct mpc52xx_psc_spi_cs *cs = spi->controller_state; + struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master); + struct mpc52xx_psc __iomem *psc = mps->psc; + u32 sicr; + u16 ccr; + + sicr = in_be32(&psc->sicr); + + /* Set clock phase and polarity */ + if (spi->mode & SPI_CPHA) + sicr |= 0x00001000; + else + sicr &= ~0x00001000; + if (spi->mode & SPI_CPOL) + sicr |= 0x00002000; + else + sicr &= ~0x00002000; + + if (spi->mode & SPI_LSB_FIRST) + sicr |= 0x10000000; + else + sicr &= ~0x10000000; + out_be32(&psc->sicr, sicr); + + /* Set clock frequency and bits per word + * Because psc->ccr is defined as 16bit register instead of 32bit + * just set the lower byte of BitClkDiv + */ + ccr = in_be16((u16 __iomem *)&psc->ccr); + ccr &= 0xFF00; + if (cs->speed_hz) + ccr |= (MCLK / cs->speed_hz - 1) & 0xFF; + else /* by default SPI Clk 1MHz */ + ccr |= (MCLK / 1000000 - 1) & 0xFF; + out_be16((u16 __iomem *)&psc->ccr, ccr); + mps->bits_per_word = cs->bits_per_word; + + if (mps->cs_control) + mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 1 : 0); +} + +static void mpc52xx_psc_spi_deactivate_cs(struct spi_device *spi) +{ + struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master); + + if (mps->cs_control) + mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 0 : 1); +} + +#define MPC52xx_PSC_BUFSIZE (MPC52xx_PSC_RFNUM_MASK + 1) +/* wake up when 80% fifo full */ +#define MPC52xx_PSC_RFALARM (MPC52xx_PSC_BUFSIZE * 20 / 100) + +static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, + struct spi_transfer *t) +{ + struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master); + struct mpc52xx_psc __iomem *psc = mps->psc; + struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo; + unsigned rb = 0; /* number of bytes receieved */ + unsigned sb = 0; /* number of bytes sent */ + unsigned char *rx_buf = (unsigned char *)t->rx_buf; + unsigned char *tx_buf = (unsigned char *)t->tx_buf; + unsigned rfalarm; + unsigned send_at_once = MPC52xx_PSC_BUFSIZE; + unsigned recv_at_once; + int last_block = 0; + + if (!t->tx_buf && !t->rx_buf && t->len) + return -EINVAL; + + /* enable transmiter/receiver */ + out_8(&psc->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE); + while (rb < t->len) { + if (t->len - rb > MPC52xx_PSC_BUFSIZE) { + rfalarm = MPC52xx_PSC_RFALARM; + last_block = 0; + } else { + send_at_once = t->len - sb; + rfalarm = MPC52xx_PSC_BUFSIZE - (t->len - rb); + last_block = 1; + } + + dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once); + for (; send_at_once; sb++, send_at_once--) { + /* set EOF flag before the last word is sent */ + if (send_at_once == 1 && last_block) + out_8(&psc->ircr2, 0x01); + + if (tx_buf) + out_8(&psc->mpc52xx_psc_buffer_8, tx_buf[sb]); + else + out_8(&psc->mpc52xx_psc_buffer_8, 0); + } + + + /* enable interrupts and wait for wake up + * if just one byte is expected the Rx FIFO genererates no + * FFULL interrupt, so activate the RxRDY interrupt + */ + out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); + if (t->len - rb == 1) { + out_8(&psc->mode, 0); + } else { + out_8(&psc->mode, MPC52xx_PSC_MODE_FFULL); + out_be16(&fifo->rfalarm, rfalarm); + } + out_be16(&psc->mpc52xx_psc_imr, MPC52xx_PSC_IMR_RXRDY); + wait_for_completion(&mps->done); + recv_at_once = in_be16(&fifo->rfnum); + dev_dbg(&spi->dev, "%d bytes received\n", recv_at_once); + + send_at_once = recv_at_once; + if (rx_buf) { + for (; recv_at_once; rb++, recv_at_once--) + rx_buf[rb] = in_8(&psc->mpc52xx_psc_buffer_8); + } else { + for (; recv_at_once; rb++, recv_at_once--) + in_8(&psc->mpc52xx_psc_buffer_8); + } + } + /* disable transmiter/receiver */ + out_8(&psc->command, MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE); + + return 0; +} + +static void mpc52xx_psc_spi_work(struct work_struct *work) +{ + struct mpc52xx_psc_spi *mps = + container_of(work, struct mpc52xx_psc_spi, work); + + spin_lock_irq(&mps->lock); + mps->busy = 1; + while (!list_empty(&mps->queue)) { + struct spi_message *m; + struct spi_device *spi; + struct spi_transfer *t = NULL; + unsigned cs_change; + int status; + + m = container_of(mps->queue.next, struct spi_message, queue); + list_del_init(&m->queue); + spin_unlock_irq(&mps->lock); + + spi = m->spi; + cs_change = 1; + status = 0; + list_for_each_entry (t, &m->transfers, transfer_list) { + if (t->bits_per_word || t->speed_hz) { + status = mpc52xx_psc_spi_transfer_setup(spi, t); + if (status < 0) + break; + } + + if (cs_change) + mpc52xx_psc_spi_activate_cs(spi); + cs_change = t->cs_change; + + status = mpc52xx_psc_spi_transfer_rxtx(spi, t); + if (status) + break; + m->actual_length += t->len; + + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (cs_change) + mpc52xx_psc_spi_deactivate_cs(spi); + } + + m->status = status; + m->complete(m->context); + + if (status || !cs_change) + mpc52xx_psc_spi_deactivate_cs(spi); + + mpc52xx_psc_spi_transfer_setup(spi, NULL); + + spin_lock_irq(&mps->lock); + } + mps->busy = 0; + spin_unlock_irq(&mps->lock); +} + +static int mpc52xx_psc_spi_setup(struct spi_device *spi) +{ + struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master); + struct mpc52xx_psc_spi_cs *cs = spi->controller_state; + unsigned long flags; + + if (spi->bits_per_word%8) + return -EINVAL; + + if (!cs) { + cs = kzalloc(sizeof *cs, GFP_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + + cs->bits_per_word = spi->bits_per_word; + cs->speed_hz = spi->max_speed_hz; + + spin_lock_irqsave(&mps->lock, flags); + if (!mps->busy) + mpc52xx_psc_spi_deactivate_cs(spi); + spin_unlock_irqrestore(&mps->lock, flags); + + return 0; +} + +static int mpc52xx_psc_spi_transfer(struct spi_device *spi, + struct spi_message *m) +{ + struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master); + unsigned long flags; + + m->actual_length = 0; + m->status = -EINPROGRESS; + + spin_lock_irqsave(&mps->lock, flags); + list_add_tail(&m->queue, &mps->queue); + queue_work(mps->workqueue, &mps->work); + spin_unlock_irqrestore(&mps->lock, flags); + + return 0; +} + +static void mpc52xx_psc_spi_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} + +static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps) +{ + struct mpc52xx_psc __iomem *psc = mps->psc; + struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo; + u32 mclken_div; + int ret; + + /* default sysclk is 512MHz */ + mclken_div = (mps->sysclk ? mps->sysclk : 512000000) / MCLK; + ret = mpc52xx_set_psc_clkdiv(psc_id, mclken_div); + if (ret) + return ret; + + /* Reset the PSC into a known state */ + out_8(&psc->command, MPC52xx_PSC_RST_RX); + out_8(&psc->command, MPC52xx_PSC_RST_TX); + out_8(&psc->command, MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE); + + /* Disable interrupts, interrupts are based on alarm level */ + out_be16(&psc->mpc52xx_psc_imr, 0); + out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); + out_8(&fifo->rfcntl, 0); + out_8(&psc->mode, MPC52xx_PSC_MODE_FFULL); + + /* Configure 8bit codec mode as a SPI master and use EOF flags */ + /* SICR_SIM_CODEC8|SICR_GENCLK|SICR_SPI|SICR_MSTR|SICR_USEEOF */ + out_be32(&psc->sicr, 0x0180C800); + out_be16((u16 __iomem *)&psc->ccr, 0x070F); /* default SPI Clk 1MHz */ + + /* Set 2ms DTL delay */ + out_8(&psc->ctur, 0x00); + out_8(&psc->ctlr, 0x84); + + mps->bits_per_word = 8; + + return 0; +} + +static irqreturn_t mpc52xx_psc_spi_isr(int irq, void *dev_id) +{ + struct mpc52xx_psc_spi *mps = (struct mpc52xx_psc_spi *)dev_id; + struct mpc52xx_psc __iomem *psc = mps->psc; + + /* disable interrupt and wake up the work queue */ + if (in_be16(&psc->mpc52xx_psc_isr) & MPC52xx_PSC_IMR_RXRDY) { + out_be16(&psc->mpc52xx_psc_imr, 0); + complete(&mps->done); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +/* bus_num is used only for the case dev->platform_data == NULL */ +static int __devinit mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr, + u32 size, unsigned int irq, s16 bus_num) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct mpc52xx_psc_spi *mps; + struct spi_master *master; + int ret; + + master = spi_alloc_master(dev, sizeof *mps); + if (master == NULL) + return -ENOMEM; + + dev_set_drvdata(dev, master); + mps = spi_master_get_devdata(master); + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST; + + mps->irq = irq; + if (pdata == NULL) { + dev_warn(dev, "probe called without platform data, no " + "cs_control function will be called\n"); + mps->cs_control = NULL; + mps->sysclk = 0; + master->bus_num = bus_num; + master->num_chipselect = 255; + } else { + mps->cs_control = pdata->cs_control; + mps->sysclk = pdata->sysclk; + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->max_chipselect; + } + master->setup = mpc52xx_psc_spi_setup; + master->transfer = mpc52xx_psc_spi_transfer; + master->cleanup = mpc52xx_psc_spi_cleanup; + master->dev.of_node = dev->of_node; + + mps->psc = ioremap(regaddr, size); + if (!mps->psc) { + dev_err(dev, "could not ioremap I/O port range\n"); + ret = -EFAULT; + goto free_master; + } + /* On the 5200, fifo regs are immediately ajacent to the psc regs */ + mps->fifo = ((void __iomem *)mps->psc) + sizeof(struct mpc52xx_psc); + + ret = request_irq(mps->irq, mpc52xx_psc_spi_isr, 0, "mpc52xx-psc-spi", + mps); + if (ret) + goto free_master; + + ret = mpc52xx_psc_spi_port_config(master->bus_num, mps); + if (ret < 0) { + dev_err(dev, "can't configure PSC! Is it capable of SPI?\n"); + goto free_irq; + } + + spin_lock_init(&mps->lock); + init_completion(&mps->done); + INIT_WORK(&mps->work, mpc52xx_psc_spi_work); + INIT_LIST_HEAD(&mps->queue); + + mps->workqueue = create_singlethread_workqueue( + dev_name(master->dev.parent)); + if (mps->workqueue == NULL) { + ret = -EBUSY; + goto free_irq; + } + + ret = spi_register_master(master); + if (ret < 0) + goto unreg_master; + + return ret; + +unreg_master: + destroy_workqueue(mps->workqueue); +free_irq: + free_irq(mps->irq, mps); +free_master: + if (mps->psc) + iounmap(mps->psc); + spi_master_put(master); + + return ret; +} + +static int __devinit mpc52xx_psc_spi_of_probe(struct platform_device *op) +{ + const u32 *regaddr_p; + u64 regaddr64, size64; + s16 id = -1; + + regaddr_p = of_get_address(op->dev.of_node, 0, &size64, NULL); + if (!regaddr_p) { + dev_err(&op->dev, "Invalid PSC address\n"); + return -EINVAL; + } + regaddr64 = of_translate_address(op->dev.of_node, regaddr_p); + + /* get PSC id (1..6, used by port_config) */ + if (op->dev.platform_data == NULL) { + const u32 *psc_nump; + + psc_nump = of_get_property(op->dev.of_node, "cell-index", NULL); + if (!psc_nump || *psc_nump > 5) { + dev_err(&op->dev, "Invalid cell-index property\n"); + return -EINVAL; + } + id = *psc_nump + 1; + } + + return mpc52xx_psc_spi_do_probe(&op->dev, (u32)regaddr64, (u32)size64, + irq_of_parse_and_map(op->dev.of_node, 0), id); +} + +static int __devexit mpc52xx_psc_spi_of_remove(struct platform_device *op) +{ + struct spi_master *master = dev_get_drvdata(&op->dev); + struct mpc52xx_psc_spi *mps = spi_master_get_devdata(master); + + flush_workqueue(mps->workqueue); + destroy_workqueue(mps->workqueue); + spi_unregister_master(master); + free_irq(mps->irq, mps); + if (mps->psc) + iounmap(mps->psc); + + return 0; +} + +static const struct of_device_id mpc52xx_psc_spi_of_match[] = { + { .compatible = "fsl,mpc5200-psc-spi", }, + { .compatible = "mpc5200-psc-spi", }, /* old */ + {} +}; + +MODULE_DEVICE_TABLE(of, mpc52xx_psc_spi_of_match); + +static struct platform_driver mpc52xx_psc_spi_of_driver = { + .probe = mpc52xx_psc_spi_of_probe, + .remove = __devexit_p(mpc52xx_psc_spi_of_remove), + .driver = { + .name = "mpc52xx-psc-spi", + .owner = THIS_MODULE, + .of_match_table = mpc52xx_psc_spi_of_match, + }, +}; + +static int __init mpc52xx_psc_spi_init(void) +{ + return platform_driver_register(&mpc52xx_psc_spi_of_driver); +} +module_init(mpc52xx_psc_spi_init); + +static void __exit mpc52xx_psc_spi_exit(void) +{ + platform_driver_unregister(&mpc52xx_psc_spi_of_driver); +} +module_exit(mpc52xx_psc_spi_exit); + +MODULE_AUTHOR("Dragos Carp"); +MODULE_DESCRIPTION("MPC52xx PSC SPI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-mpc52xx.c b/drivers/spi/spi-mpc52xx.c new file mode 100644 index 000000000000..015a974bed72 --- /dev/null +++ b/drivers/spi/spi-mpc52xx.c @@ -0,0 +1,579 @@ +/* + * MPC52xx SPI bus driver. + * + * Copyright (C) 2008 Secret Lab Technologies Ltd. + * + * This file is released under the GPLv2 + * + * This is the driver for the MPC5200's dedicated SPI controller. + * + * Note: this driver does not support the MPC5200 PSC in SPI mode. For + * that driver see drivers/spi/mpc52xx_psc_spi.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Grant Likely "); +MODULE_DESCRIPTION("MPC52xx SPI (non-PSC) Driver"); +MODULE_LICENSE("GPL"); + +/* Register offsets */ +#define SPI_CTRL1 0x00 +#define SPI_CTRL1_SPIE (1 << 7) +#define SPI_CTRL1_SPE (1 << 6) +#define SPI_CTRL1_MSTR (1 << 4) +#define SPI_CTRL1_CPOL (1 << 3) +#define SPI_CTRL1_CPHA (1 << 2) +#define SPI_CTRL1_SSOE (1 << 1) +#define SPI_CTRL1_LSBFE (1 << 0) + +#define SPI_CTRL2 0x01 +#define SPI_BRR 0x04 + +#define SPI_STATUS 0x05 +#define SPI_STATUS_SPIF (1 << 7) +#define SPI_STATUS_WCOL (1 << 6) +#define SPI_STATUS_MODF (1 << 4) + +#define SPI_DATA 0x09 +#define SPI_PORTDATA 0x0d +#define SPI_DATADIR 0x10 + +/* FSM state return values */ +#define FSM_STOP 0 /* Nothing more for the state machine to */ + /* do. If something interesting happens */ + /* then an IRQ will be received */ +#define FSM_POLL 1 /* need to poll for completion, an IRQ is */ + /* not expected */ +#define FSM_CONTINUE 2 /* Keep iterating the state machine */ + +/* Driver internal data */ +struct mpc52xx_spi { + struct spi_master *master; + void __iomem *regs; + int irq0; /* MODF irq */ + int irq1; /* SPIF irq */ + unsigned int ipb_freq; + + /* Statistics; not used now, but will be reintroduced for debugfs */ + int msg_count; + int wcol_count; + int wcol_ticks; + u32 wcol_tx_timestamp; + int modf_count; + int byte_count; + + struct list_head queue; /* queue of pending messages */ + spinlock_t lock; + struct work_struct work; + + /* Details of current transfer (length, and buffer pointers) */ + struct spi_message *message; /* current message */ + struct spi_transfer *transfer; /* current transfer */ + int (*state)(int irq, struct mpc52xx_spi *ms, u8 status, u8 data); + int len; + int timestamp; + u8 *rx_buf; + const u8 *tx_buf; + int cs_change; + int gpio_cs_count; + unsigned int *gpio_cs; +}; + +/* + * CS control function + */ +static void mpc52xx_spi_chipsel(struct mpc52xx_spi *ms, int value) +{ + int cs; + + if (ms->gpio_cs_count > 0) { + cs = ms->message->spi->chip_select; + gpio_set_value(ms->gpio_cs[cs], value ? 0 : 1); + } else + out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08); +} + +/* + * Start a new transfer. This is called both by the idle state + * for the first transfer in a message, and by the wait state when the + * previous transfer in a message is complete. + */ +static void mpc52xx_spi_start_transfer(struct mpc52xx_spi *ms) +{ + ms->rx_buf = ms->transfer->rx_buf; + ms->tx_buf = ms->transfer->tx_buf; + ms->len = ms->transfer->len; + + /* Activate the chip select */ + if (ms->cs_change) + mpc52xx_spi_chipsel(ms, 1); + ms->cs_change = ms->transfer->cs_change; + + /* Write out the first byte */ + ms->wcol_tx_timestamp = get_tbl(); + if (ms->tx_buf) + out_8(ms->regs + SPI_DATA, *ms->tx_buf++); + else + out_8(ms->regs + SPI_DATA, 0); +} + +/* Forward declaration of state handlers */ +static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms, + u8 status, u8 data); +static int mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms, + u8 status, u8 data); + +/* + * IDLE state + * + * No transfers are in progress; if another transfer is pending then retrieve + * it and kick it off. Otherwise, stop processing the state machine + */ +static int +mpc52xx_spi_fsmstate_idle(int irq, struct mpc52xx_spi *ms, u8 status, u8 data) +{ + struct spi_device *spi; + int spr, sppr; + u8 ctrl1; + + if (status && (irq != NO_IRQ)) + dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n", + status); + + /* Check if there is another transfer waiting. */ + if (list_empty(&ms->queue)) + return FSM_STOP; + + /* get the head of the queue */ + ms->message = list_first_entry(&ms->queue, struct spi_message, queue); + list_del_init(&ms->message->queue); + + /* Setup the controller parameters */ + ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR; + spi = ms->message->spi; + if (spi->mode & SPI_CPHA) + ctrl1 |= SPI_CTRL1_CPHA; + if (spi->mode & SPI_CPOL) + ctrl1 |= SPI_CTRL1_CPOL; + if (spi->mode & SPI_LSB_FIRST) + ctrl1 |= SPI_CTRL1_LSBFE; + out_8(ms->regs + SPI_CTRL1, ctrl1); + + /* Setup the controller speed */ + /* minimum divider is '2'. Also, add '1' to force rounding the + * divider up. */ + sppr = ((ms->ipb_freq / ms->message->spi->max_speed_hz) + 1) >> 1; + spr = 0; + if (sppr < 1) + sppr = 1; + while (((sppr - 1) & ~0x7) != 0) { + sppr = (sppr + 1) >> 1; /* add '1' to force rounding up */ + spr++; + } + sppr--; /* sppr quantity in register is offset by 1 */ + if (spr > 7) { + /* Don't overrun limits of SPI baudrate register */ + spr = 7; + sppr = 7; + } + out_8(ms->regs + SPI_BRR, sppr << 4 | spr); /* Set speed */ + + ms->cs_change = 1; + ms->transfer = container_of(ms->message->transfers.next, + struct spi_transfer, transfer_list); + + mpc52xx_spi_start_transfer(ms); + ms->state = mpc52xx_spi_fsmstate_transfer; + + return FSM_CONTINUE; +} + +/* + * TRANSFER state + * + * In the middle of a transfer. If the SPI core has completed processing + * a byte, then read out the received data and write out the next byte + * (unless this transfer is finished; in which case go on to the wait + * state) + */ +static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms, + u8 status, u8 data) +{ + if (!status) + return ms->irq0 ? FSM_STOP : FSM_POLL; + + if (status & SPI_STATUS_WCOL) { + /* The SPI controller is stoopid. At slower speeds, it may + * raise the SPIF flag before the state machine is actually + * finished, which causes a collision (internal to the state + * machine only). The manual recommends inserting a delay + * between receiving the interrupt and sending the next byte, + * but it can also be worked around simply by retrying the + * transfer which is what we do here. */ + ms->wcol_count++; + ms->wcol_ticks += get_tbl() - ms->wcol_tx_timestamp; + ms->wcol_tx_timestamp = get_tbl(); + data = 0; + if (ms->tx_buf) + data = *(ms->tx_buf - 1); + out_8(ms->regs + SPI_DATA, data); /* try again */ + return FSM_CONTINUE; + } else if (status & SPI_STATUS_MODF) { + ms->modf_count++; + dev_err(&ms->master->dev, "mode fault\n"); + mpc52xx_spi_chipsel(ms, 0); + ms->message->status = -EIO; + ms->message->complete(ms->message->context); + ms->state = mpc52xx_spi_fsmstate_idle; + return FSM_CONTINUE; + } + + /* Read data out of the spi device */ + ms->byte_count++; + if (ms->rx_buf) + *ms->rx_buf++ = data; + + /* Is the transfer complete? */ + ms->len--; + if (ms->len == 0) { + ms->timestamp = get_tbl(); + ms->timestamp += ms->transfer->delay_usecs * tb_ticks_per_usec; + ms->state = mpc52xx_spi_fsmstate_wait; + return FSM_CONTINUE; + } + + /* Write out the next byte */ + ms->wcol_tx_timestamp = get_tbl(); + if (ms->tx_buf) + out_8(ms->regs + SPI_DATA, *ms->tx_buf++); + else + out_8(ms->regs + SPI_DATA, 0); + + return FSM_CONTINUE; +} + +/* + * WAIT state + * + * A transfer has completed; need to wait for the delay period to complete + * before starting the next transfer + */ +static int +mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms, u8 status, u8 data) +{ + if (status && irq) + dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n", + status); + + if (((int)get_tbl()) - ms->timestamp < 0) + return FSM_POLL; + + ms->message->actual_length += ms->transfer->len; + + /* Check if there is another transfer in this message. If there + * aren't then deactivate CS, notify sender, and drop back to idle + * to start the next message. */ + if (ms->transfer->transfer_list.next == &ms->message->transfers) { + ms->msg_count++; + mpc52xx_spi_chipsel(ms, 0); + ms->message->status = 0; + ms->message->complete(ms->message->context); + ms->state = mpc52xx_spi_fsmstate_idle; + return FSM_CONTINUE; + } + + /* There is another transfer; kick it off */ + + if (ms->cs_change) + mpc52xx_spi_chipsel(ms, 0); + + ms->transfer = container_of(ms->transfer->transfer_list.next, + struct spi_transfer, transfer_list); + mpc52xx_spi_start_transfer(ms); + ms->state = mpc52xx_spi_fsmstate_transfer; + return FSM_CONTINUE; +} + +/** + * mpc52xx_spi_fsm_process - Finite State Machine iteration function + * @irq: irq number that triggered the FSM or 0 for polling + * @ms: pointer to mpc52xx_spi driver data + */ +static void mpc52xx_spi_fsm_process(int irq, struct mpc52xx_spi *ms) +{ + int rc = FSM_CONTINUE; + u8 status, data; + + while (rc == FSM_CONTINUE) { + /* Interrupt cleared by read of STATUS followed by + * read of DATA registers */ + status = in_8(ms->regs + SPI_STATUS); + data = in_8(ms->regs + SPI_DATA); + rc = ms->state(irq, ms, status, data); + } + + if (rc == FSM_POLL) + schedule_work(&ms->work); +} + +/** + * mpc52xx_spi_irq - IRQ handler + */ +static irqreturn_t mpc52xx_spi_irq(int irq, void *_ms) +{ + struct mpc52xx_spi *ms = _ms; + spin_lock(&ms->lock); + mpc52xx_spi_fsm_process(irq, ms); + spin_unlock(&ms->lock); + return IRQ_HANDLED; +} + +/** + * mpc52xx_spi_wq - Workqueue function for polling the state machine + */ +static void mpc52xx_spi_wq(struct work_struct *work) +{ + struct mpc52xx_spi *ms = container_of(work, struct mpc52xx_spi, work); + unsigned long flags; + + spin_lock_irqsave(&ms->lock, flags); + mpc52xx_spi_fsm_process(0, ms); + spin_unlock_irqrestore(&ms->lock, flags); +} + +/* + * spi_master ops + */ + +static int mpc52xx_spi_setup(struct spi_device *spi) +{ + if (spi->bits_per_word % 8) + return -EINVAL; + + if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) + return -EINVAL; + + if (spi->chip_select >= spi->master->num_chipselect) + return -EINVAL; + + return 0; +} + +static int mpc52xx_spi_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct mpc52xx_spi *ms = spi_master_get_devdata(spi->master); + unsigned long flags; + + m->actual_length = 0; + m->status = -EINPROGRESS; + + spin_lock_irqsave(&ms->lock, flags); + list_add_tail(&m->queue, &ms->queue); + spin_unlock_irqrestore(&ms->lock, flags); + schedule_work(&ms->work); + + return 0; +} + +/* + * OF Platform Bus Binding + */ +static int __devinit mpc52xx_spi_probe(struct platform_device *op) +{ + struct spi_master *master; + struct mpc52xx_spi *ms; + void __iomem *regs; + u8 ctrl1; + int rc, i = 0; + int gpio_cs; + + /* MMIO registers */ + dev_dbg(&op->dev, "probing mpc5200 SPI device\n"); + regs = of_iomap(op->dev.of_node, 0); + if (!regs) + return -ENODEV; + + /* initialize the device */ + ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR; + out_8(regs + SPI_CTRL1, ctrl1); + out_8(regs + SPI_CTRL2, 0x0); + out_8(regs + SPI_DATADIR, 0xe); /* Set output pins */ + out_8(regs + SPI_PORTDATA, 0x8); /* Deassert /SS signal */ + + /* Clear the status register and re-read it to check for a MODF + * failure. This driver cannot currently handle multiple masters + * on the SPI bus. This fault will also occur if the SPI signals + * are not connected to any pins (port_config setting) */ + in_8(regs + SPI_STATUS); + out_8(regs + SPI_CTRL1, ctrl1); + + in_8(regs + SPI_DATA); + if (in_8(regs + SPI_STATUS) & SPI_STATUS_MODF) { + dev_err(&op->dev, "mode fault; is port_config correct?\n"); + rc = -EIO; + goto err_init; + } + + dev_dbg(&op->dev, "allocating spi_master struct\n"); + master = spi_alloc_master(&op->dev, sizeof *ms); + if (!master) { + rc = -ENOMEM; + goto err_alloc; + } + + master->bus_num = -1; + master->setup = mpc52xx_spi_setup; + master->transfer = mpc52xx_spi_transfer; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; + master->dev.of_node = op->dev.of_node; + + dev_set_drvdata(&op->dev, master); + + ms = spi_master_get_devdata(master); + ms->master = master; + ms->regs = regs; + ms->irq0 = irq_of_parse_and_map(op->dev.of_node, 0); + ms->irq1 = irq_of_parse_and_map(op->dev.of_node, 1); + ms->state = mpc52xx_spi_fsmstate_idle; + ms->ipb_freq = mpc5xxx_get_bus_frequency(op->dev.of_node); + ms->gpio_cs_count = of_gpio_count(op->dev.of_node); + if (ms->gpio_cs_count > 0) { + master->num_chipselect = ms->gpio_cs_count; + ms->gpio_cs = kmalloc(ms->gpio_cs_count * sizeof(unsigned int), + GFP_KERNEL); + if (!ms->gpio_cs) { + rc = -ENOMEM; + goto err_alloc; + } + + for (i = 0; i < ms->gpio_cs_count; i++) { + gpio_cs = of_get_gpio(op->dev.of_node, i); + if (gpio_cs < 0) { + dev_err(&op->dev, + "could not parse the gpio field " + "in oftree\n"); + rc = -ENODEV; + goto err_gpio; + } + + rc = gpio_request(gpio_cs, dev_name(&op->dev)); + if (rc) { + dev_err(&op->dev, + "can't request spi cs gpio #%d " + "on gpio line %d\n", i, gpio_cs); + goto err_gpio; + } + + gpio_direction_output(gpio_cs, 1); + ms->gpio_cs[i] = gpio_cs; + } + } else { + master->num_chipselect = 1; + } + + spin_lock_init(&ms->lock); + INIT_LIST_HEAD(&ms->queue); + INIT_WORK(&ms->work, mpc52xx_spi_wq); + + /* Decide if interrupts can be used */ + if (ms->irq0 && ms->irq1) { + rc = request_irq(ms->irq0, mpc52xx_spi_irq, 0, + "mpc5200-spi-modf", ms); + rc |= request_irq(ms->irq1, mpc52xx_spi_irq, 0, + "mpc5200-spi-spif", ms); + if (rc) { + free_irq(ms->irq0, ms); + free_irq(ms->irq1, ms); + ms->irq0 = ms->irq1 = 0; + } + } else { + /* operate in polled mode */ + ms->irq0 = ms->irq1 = 0; + } + + if (!ms->irq0) + dev_info(&op->dev, "using polled mode\n"); + + dev_dbg(&op->dev, "registering spi_master struct\n"); + rc = spi_register_master(master); + if (rc) + goto err_register; + + dev_info(&ms->master->dev, "registered MPC5200 SPI bus\n"); + + return rc; + + err_register: + dev_err(&ms->master->dev, "initialization failed\n"); + spi_master_put(master); + err_gpio: + while (i-- > 0) + gpio_free(ms->gpio_cs[i]); + + kfree(ms->gpio_cs); + err_alloc: + err_init: + iounmap(regs); + return rc; +} + +static int __devexit mpc52xx_spi_remove(struct platform_device *op) +{ + struct spi_master *master = dev_get_drvdata(&op->dev); + struct mpc52xx_spi *ms = spi_master_get_devdata(master); + int i; + + free_irq(ms->irq0, ms); + free_irq(ms->irq1, ms); + + for (i = 0; i < ms->gpio_cs_count; i++) + gpio_free(ms->gpio_cs[i]); + + kfree(ms->gpio_cs); + spi_unregister_master(master); + spi_master_put(master); + iounmap(ms->regs); + + return 0; +} + +static const struct of_device_id mpc52xx_spi_match[] __devinitconst = { + { .compatible = "fsl,mpc5200-spi", }, + {} +}; +MODULE_DEVICE_TABLE(of, mpc52xx_spi_match); + +static struct platform_driver mpc52xx_spi_of_driver = { + .driver = { + .name = "mpc52xx-spi", + .owner = THIS_MODULE, + .of_match_table = mpc52xx_spi_match, + }, + .probe = mpc52xx_spi_probe, + .remove = __devexit_p(mpc52xx_spi_remove), +}; + +static int __init mpc52xx_spi_init(void) +{ + return platform_driver_register(&mpc52xx_spi_of_driver); +} +module_init(mpc52xx_spi_init); + +static void __exit mpc52xx_spi_exit(void) +{ + platform_driver_unregister(&mpc52xx_spi_of_driver); +} +module_exit(mpc52xx_spi_exit); + diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c new file mode 100644 index 000000000000..c0a6ce81f9c0 --- /dev/null +++ b/drivers/spi/spi-nuc900.c @@ -0,0 +1,504 @@ +/* + * Copyright (c) 2009 Nuvoton technology. + * Wan ZongShun + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +/* usi registers offset */ +#define USI_CNT 0x00 +#define USI_DIV 0x04 +#define USI_SSR 0x08 +#define USI_RX0 0x10 +#define USI_TX0 0x10 + +/* usi register bit */ +#define ENINT (0x01 << 17) +#define ENFLG (0x01 << 16) +#define TXNUM (0x03 << 8) +#define TXNEG (0x01 << 2) +#define RXNEG (0x01 << 1) +#define LSB (0x01 << 10) +#define SELECTLEV (0x01 << 2) +#define SELECTPOL (0x01 << 31) +#define SELECTSLAVE 0x01 +#define GOBUSY 0x01 + +struct nuc900_spi { + struct spi_bitbang bitbang; + struct completion done; + void __iomem *regs; + int irq; + int len; + int count; + const unsigned char *tx; + unsigned char *rx; + struct clk *clk; + struct resource *ioarea; + struct spi_master *master; + struct spi_device *curdev; + struct device *dev; + struct nuc900_spi_info *pdata; + spinlock_t lock; + struct resource *res; +}; + +static inline struct nuc900_spi *to_hw(struct spi_device *sdev) +{ + return spi_master_get_devdata(sdev->master); +} + +static void nuc900_slave_select(struct spi_device *spi, unsigned int ssr) +{ + struct nuc900_spi *hw = to_hw(spi); + unsigned int val; + unsigned int cs = spi->mode & SPI_CS_HIGH ? 1 : 0; + unsigned int cpol = spi->mode & SPI_CPOL ? 1 : 0; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + + val = __raw_readl(hw->regs + USI_SSR); + + if (!cs) + val &= ~SELECTLEV; + else + val |= SELECTLEV; + + if (!ssr) + val &= ~SELECTSLAVE; + else + val |= SELECTSLAVE; + + __raw_writel(val, hw->regs + USI_SSR); + + val = __raw_readl(hw->regs + USI_CNT); + + if (!cpol) + val &= ~SELECTPOL; + else + val |= SELECTPOL; + + __raw_writel(val, hw->regs + USI_CNT); + + spin_unlock_irqrestore(&hw->lock, flags); +} + +static void nuc900_spi_chipsel(struct spi_device *spi, int value) +{ + switch (value) { + case BITBANG_CS_INACTIVE: + nuc900_slave_select(spi, 0); + break; + + case BITBANG_CS_ACTIVE: + nuc900_slave_select(spi, 1); + break; + } +} + +static void nuc900_spi_setup_txnum(struct nuc900_spi *hw, + unsigned int txnum) +{ + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + + val = __raw_readl(hw->regs + USI_CNT); + + if (!txnum) + val &= ~TXNUM; + else + val |= txnum << 0x08; + + __raw_writel(val, hw->regs + USI_CNT); + + spin_unlock_irqrestore(&hw->lock, flags); + +} + +static void nuc900_spi_setup_txbitlen(struct nuc900_spi *hw, + unsigned int txbitlen) +{ + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + + val = __raw_readl(hw->regs + USI_CNT); + + val |= (txbitlen << 0x03); + + __raw_writel(val, hw->regs + USI_CNT); + + spin_unlock_irqrestore(&hw->lock, flags); +} + +static void nuc900_spi_gobusy(struct nuc900_spi *hw) +{ + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + + val = __raw_readl(hw->regs + USI_CNT); + + val |= GOBUSY; + + __raw_writel(val, hw->regs + USI_CNT); + + spin_unlock_irqrestore(&hw->lock, flags); +} + +static int nuc900_spi_setupxfer(struct spi_device *spi, + struct spi_transfer *t) +{ + return 0; +} + +static int nuc900_spi_setup(struct spi_device *spi) +{ + return 0; +} + +static inline unsigned int hw_txbyte(struct nuc900_spi *hw, int count) +{ + return hw->tx ? hw->tx[count] : 0; +} + +static int nuc900_spi_txrx(struct spi_device *spi, struct spi_transfer *t) +{ + struct nuc900_spi *hw = to_hw(spi); + + hw->tx = t->tx_buf; + hw->rx = t->rx_buf; + hw->len = t->len; + hw->count = 0; + + __raw_writel(hw_txbyte(hw, 0x0), hw->regs + USI_TX0); + + nuc900_spi_gobusy(hw); + + wait_for_completion(&hw->done); + + return hw->count; +} + +static irqreturn_t nuc900_spi_irq(int irq, void *dev) +{ + struct nuc900_spi *hw = dev; + unsigned int status; + unsigned int count = hw->count; + + status = __raw_readl(hw->regs + USI_CNT); + __raw_writel(status, hw->regs + USI_CNT); + + if (status & ENFLG) { + hw->count++; + + if (hw->rx) + hw->rx[count] = __raw_readl(hw->regs + USI_RX0); + count++; + + if (count < hw->len) { + __raw_writel(hw_txbyte(hw, count), hw->regs + USI_TX0); + nuc900_spi_gobusy(hw); + } else { + complete(&hw->done); + } + + return IRQ_HANDLED; + } + + complete(&hw->done); + return IRQ_HANDLED; +} + +static void nuc900_tx_edge(struct nuc900_spi *hw, unsigned int edge) +{ + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + + val = __raw_readl(hw->regs + USI_CNT); + + if (edge) + val |= TXNEG; + else + val &= ~TXNEG; + __raw_writel(val, hw->regs + USI_CNT); + + spin_unlock_irqrestore(&hw->lock, flags); +} + +static void nuc900_rx_edge(struct nuc900_spi *hw, unsigned int edge) +{ + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + + val = __raw_readl(hw->regs + USI_CNT); + + if (edge) + val |= RXNEG; + else + val &= ~RXNEG; + __raw_writel(val, hw->regs + USI_CNT); + + spin_unlock_irqrestore(&hw->lock, flags); +} + +static void nuc900_send_first(struct nuc900_spi *hw, unsigned int lsb) +{ + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + + val = __raw_readl(hw->regs + USI_CNT); + + if (lsb) + val |= LSB; + else + val &= ~LSB; + __raw_writel(val, hw->regs + USI_CNT); + + spin_unlock_irqrestore(&hw->lock, flags); +} + +static void nuc900_set_sleep(struct nuc900_spi *hw, unsigned int sleep) +{ + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + + val = __raw_readl(hw->regs + USI_CNT); + + if (sleep) + val |= (sleep << 12); + else + val &= ~(0x0f << 12); + __raw_writel(val, hw->regs + USI_CNT); + + spin_unlock_irqrestore(&hw->lock, flags); +} + +static void nuc900_enable_int(struct nuc900_spi *hw) +{ + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + + val = __raw_readl(hw->regs + USI_CNT); + + val |= ENINT; + + __raw_writel(val, hw->regs + USI_CNT); + + spin_unlock_irqrestore(&hw->lock, flags); +} + +static void nuc900_set_divider(struct nuc900_spi *hw) +{ + __raw_writel(hw->pdata->divider, hw->regs + USI_DIV); +} + +static void nuc900_init_spi(struct nuc900_spi *hw) +{ + clk_enable(hw->clk); + spin_lock_init(&hw->lock); + + nuc900_tx_edge(hw, hw->pdata->txneg); + nuc900_rx_edge(hw, hw->pdata->rxneg); + nuc900_send_first(hw, hw->pdata->lsb); + nuc900_set_sleep(hw, hw->pdata->sleep); + nuc900_spi_setup_txbitlen(hw, hw->pdata->txbitlen); + nuc900_spi_setup_txnum(hw, hw->pdata->txnum); + nuc900_set_divider(hw); + nuc900_enable_int(hw); +} + +static int __devinit nuc900_spi_probe(struct platform_device *pdev) +{ + struct nuc900_spi *hw; + struct spi_master *master; + int err = 0; + + master = spi_alloc_master(&pdev->dev, sizeof(struct nuc900_spi)); + if (master == NULL) { + dev_err(&pdev->dev, "No memory for spi_master\n"); + err = -ENOMEM; + goto err_nomem; + } + + hw = spi_master_get_devdata(master); + memset(hw, 0, sizeof(struct nuc900_spi)); + + hw->master = spi_master_get(master); + hw->pdata = pdev->dev.platform_data; + hw->dev = &pdev->dev; + + if (hw->pdata == NULL) { + dev_err(&pdev->dev, "No platform data supplied\n"); + err = -ENOENT; + goto err_pdata; + } + + platform_set_drvdata(pdev, hw); + init_completion(&hw->done); + + master->mode_bits = SPI_MODE_0; + master->num_chipselect = hw->pdata->num_cs; + master->bus_num = hw->pdata->bus_num; + hw->bitbang.master = hw->master; + hw->bitbang.setup_transfer = nuc900_spi_setupxfer; + hw->bitbang.chipselect = nuc900_spi_chipsel; + hw->bitbang.txrx_bufs = nuc900_spi_txrx; + hw->bitbang.master->setup = nuc900_spi_setup; + + hw->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (hw->res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + err = -ENOENT; + goto err_pdata; + } + + hw->ioarea = request_mem_region(hw->res->start, + resource_size(hw->res), pdev->name); + + if (hw->ioarea == NULL) { + dev_err(&pdev->dev, "Cannot reserve region\n"); + err = -ENXIO; + goto err_pdata; + } + + hw->regs = ioremap(hw->res->start, resource_size(hw->res)); + if (hw->regs == NULL) { + dev_err(&pdev->dev, "Cannot map IO\n"); + err = -ENXIO; + goto err_iomap; + } + + hw->irq = platform_get_irq(pdev, 0); + if (hw->irq < 0) { + dev_err(&pdev->dev, "No IRQ specified\n"); + err = -ENOENT; + goto err_irq; + } + + err = request_irq(hw->irq, nuc900_spi_irq, 0, pdev->name, hw); + if (err) { + dev_err(&pdev->dev, "Cannot claim IRQ\n"); + goto err_irq; + } + + hw->clk = clk_get(&pdev->dev, "spi"); + if (IS_ERR(hw->clk)) { + dev_err(&pdev->dev, "No clock for device\n"); + err = PTR_ERR(hw->clk); + goto err_clk; + } + + mfp_set_groupg(&pdev->dev); + nuc900_init_spi(hw); + + err = spi_bitbang_start(&hw->bitbang); + if (err) { + dev_err(&pdev->dev, "Failed to register SPI master\n"); + goto err_register; + } + + return 0; + +err_register: + clk_disable(hw->clk); + clk_put(hw->clk); +err_clk: + free_irq(hw->irq, hw); +err_irq: + iounmap(hw->regs); +err_iomap: + release_mem_region(hw->res->start, resource_size(hw->res)); + kfree(hw->ioarea); +err_pdata: + spi_master_put(hw->master); + +err_nomem: + return err; +} + +static int __devexit nuc900_spi_remove(struct platform_device *dev) +{ + struct nuc900_spi *hw = platform_get_drvdata(dev); + + free_irq(hw->irq, hw); + + platform_set_drvdata(dev, NULL); + + spi_bitbang_stop(&hw->bitbang); + + clk_disable(hw->clk); + clk_put(hw->clk); + + iounmap(hw->regs); + + release_mem_region(hw->res->start, resource_size(hw->res)); + kfree(hw->ioarea); + + spi_master_put(hw->master); + return 0; +} + +static struct platform_driver nuc900_spi_driver = { + .probe = nuc900_spi_probe, + .remove = __devexit_p(nuc900_spi_remove), + .driver = { + .name = "nuc900-spi", + .owner = THIS_MODULE, + }, +}; + +static int __init nuc900_spi_init(void) +{ + return platform_driver_register(&nuc900_spi_driver); +} + +static void __exit nuc900_spi_exit(void) +{ + platform_driver_unregister(&nuc900_spi_driver); +} + +module_init(nuc900_spi_init); +module_exit(nuc900_spi_exit); + +MODULE_AUTHOR("Wan ZongShun "); +MODULE_DESCRIPTION("nuc900 spi driver!"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:nuc900-spi"); diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c new file mode 100644 index 000000000000..f1bde66cea19 --- /dev/null +++ b/drivers/spi/spi-oc-tiny.c @@ -0,0 +1,425 @@ +/* + * OpenCores tiny SPI master driver + * + * http://opencores.org/project,tiny_spi + * + * Copyright (C) 2011 Thomas Chou + * + * Based on spi_s3c24xx.c, which is: + * Copyright (c) 2006 Ben Dooks + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "spi_oc_tiny" + +#define TINY_SPI_RXDATA 0 +#define TINY_SPI_TXDATA 4 +#define TINY_SPI_STATUS 8 +#define TINY_SPI_CONTROL 12 +#define TINY_SPI_BAUD 16 + +#define TINY_SPI_STATUS_TXE 0x1 +#define TINY_SPI_STATUS_TXR 0x2 + +struct tiny_spi { + /* bitbang has to be first */ + struct spi_bitbang bitbang; + struct completion done; + + void __iomem *base; + int irq; + unsigned int freq; + unsigned int baudwidth; + unsigned int baud; + unsigned int speed_hz; + unsigned int mode; + unsigned int len; + unsigned int txc, rxc; + const u8 *txp; + u8 *rxp; + unsigned int gpio_cs_count; + int *gpio_cs; +}; + +static inline struct tiny_spi *tiny_spi_to_hw(struct spi_device *sdev) +{ + return spi_master_get_devdata(sdev->master); +} + +static unsigned int tiny_spi_baud(struct spi_device *spi, unsigned int hz) +{ + struct tiny_spi *hw = tiny_spi_to_hw(spi); + + return min(DIV_ROUND_UP(hw->freq, hz * 2), (1U << hw->baudwidth)) - 1; +} + +static void tiny_spi_chipselect(struct spi_device *spi, int is_active) +{ + struct tiny_spi *hw = tiny_spi_to_hw(spi); + + if (hw->gpio_cs_count) { + gpio_set_value(hw->gpio_cs[spi->chip_select], + (spi->mode & SPI_CS_HIGH) ? is_active : !is_active); + } +} + +static int tiny_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct tiny_spi *hw = tiny_spi_to_hw(spi); + unsigned int baud = hw->baud; + + if (t) { + if (t->speed_hz && t->speed_hz != hw->speed_hz) + baud = tiny_spi_baud(spi, t->speed_hz); + } + writel(baud, hw->base + TINY_SPI_BAUD); + writel(hw->mode, hw->base + TINY_SPI_CONTROL); + return 0; +} + +static int tiny_spi_setup(struct spi_device *spi) +{ + struct tiny_spi *hw = tiny_spi_to_hw(spi); + + if (spi->max_speed_hz != hw->speed_hz) { + hw->speed_hz = spi->max_speed_hz; + hw->baud = tiny_spi_baud(spi, hw->speed_hz); + } + hw->mode = spi->mode & (SPI_CPOL | SPI_CPHA); + return 0; +} + +static inline void tiny_spi_wait_txr(struct tiny_spi *hw) +{ + while (!(readb(hw->base + TINY_SPI_STATUS) & + TINY_SPI_STATUS_TXR)) + cpu_relax(); +} + +static inline void tiny_spi_wait_txe(struct tiny_spi *hw) +{ + while (!(readb(hw->base + TINY_SPI_STATUS) & + TINY_SPI_STATUS_TXE)) + cpu_relax(); +} + +static int tiny_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct tiny_spi *hw = tiny_spi_to_hw(spi); + const u8 *txp = t->tx_buf; + u8 *rxp = t->rx_buf; + unsigned int i; + + if (hw->irq >= 0) { + /* use intrrupt driven data transfer */ + hw->len = t->len; + hw->txp = t->tx_buf; + hw->rxp = t->rx_buf; + hw->txc = 0; + hw->rxc = 0; + + /* send the first byte */ + if (t->len > 1) { + writeb(hw->txp ? *hw->txp++ : 0, + hw->base + TINY_SPI_TXDATA); + hw->txc++; + writeb(hw->txp ? *hw->txp++ : 0, + hw->base + TINY_SPI_TXDATA); + hw->txc++; + writeb(TINY_SPI_STATUS_TXR, hw->base + TINY_SPI_STATUS); + } else { + writeb(hw->txp ? *hw->txp++ : 0, + hw->base + TINY_SPI_TXDATA); + hw->txc++; + writeb(TINY_SPI_STATUS_TXE, hw->base + TINY_SPI_STATUS); + } + + wait_for_completion(&hw->done); + } else if (txp && rxp) { + /* we need to tighten the transfer loop */ + writeb(*txp++, hw->base + TINY_SPI_TXDATA); + if (t->len > 1) { + writeb(*txp++, hw->base + TINY_SPI_TXDATA); + for (i = 2; i < t->len; i++) { + u8 rx, tx = *txp++; + tiny_spi_wait_txr(hw); + rx = readb(hw->base + TINY_SPI_TXDATA); + writeb(tx, hw->base + TINY_SPI_TXDATA); + *rxp++ = rx; + } + tiny_spi_wait_txr(hw); + *rxp++ = readb(hw->base + TINY_SPI_TXDATA); + } + tiny_spi_wait_txe(hw); + *rxp++ = readb(hw->base + TINY_SPI_RXDATA); + } else if (rxp) { + writeb(0, hw->base + TINY_SPI_TXDATA); + if (t->len > 1) { + writeb(0, + hw->base + TINY_SPI_TXDATA); + for (i = 2; i < t->len; i++) { + u8 rx; + tiny_spi_wait_txr(hw); + rx = readb(hw->base + TINY_SPI_TXDATA); + writeb(0, hw->base + TINY_SPI_TXDATA); + *rxp++ = rx; + } + tiny_spi_wait_txr(hw); + *rxp++ = readb(hw->base + TINY_SPI_TXDATA); + } + tiny_spi_wait_txe(hw); + *rxp++ = readb(hw->base + TINY_SPI_RXDATA); + } else if (txp) { + writeb(*txp++, hw->base + TINY_SPI_TXDATA); + if (t->len > 1) { + writeb(*txp++, hw->base + TINY_SPI_TXDATA); + for (i = 2; i < t->len; i++) { + u8 tx = *txp++; + tiny_spi_wait_txr(hw); + writeb(tx, hw->base + TINY_SPI_TXDATA); + } + } + tiny_spi_wait_txe(hw); + } else { + writeb(0, hw->base + TINY_SPI_TXDATA); + if (t->len > 1) { + writeb(0, hw->base + TINY_SPI_TXDATA); + for (i = 2; i < t->len; i++) { + tiny_spi_wait_txr(hw); + writeb(0, hw->base + TINY_SPI_TXDATA); + } + } + tiny_spi_wait_txe(hw); + } + return t->len; +} + +static irqreturn_t tiny_spi_irq(int irq, void *dev) +{ + struct tiny_spi *hw = dev; + + writeb(0, hw->base + TINY_SPI_STATUS); + if (hw->rxc + 1 == hw->len) { + if (hw->rxp) + *hw->rxp++ = readb(hw->base + TINY_SPI_RXDATA); + hw->rxc++; + complete(&hw->done); + } else { + if (hw->rxp) + *hw->rxp++ = readb(hw->base + TINY_SPI_TXDATA); + hw->rxc++; + if (hw->txc < hw->len) { + writeb(hw->txp ? *hw->txp++ : 0, + hw->base + TINY_SPI_TXDATA); + hw->txc++; + writeb(TINY_SPI_STATUS_TXR, + hw->base + TINY_SPI_STATUS); + } else { + writeb(TINY_SPI_STATUS_TXE, + hw->base + TINY_SPI_STATUS); + } + } + return IRQ_HANDLED; +} + +#ifdef CONFIG_OF +#include + +static int __devinit tiny_spi_of_probe(struct platform_device *pdev) +{ + struct tiny_spi *hw = platform_get_drvdata(pdev); + struct device_node *np = pdev->dev.of_node; + unsigned int i; + const __be32 *val; + int len; + + if (!np) + return 0; + hw->gpio_cs_count = of_gpio_count(np); + if (hw->gpio_cs_count) { + hw->gpio_cs = devm_kzalloc(&pdev->dev, + hw->gpio_cs_count * sizeof(unsigned int), + GFP_KERNEL); + if (!hw->gpio_cs) + return -ENOMEM; + } + for (i = 0; i < hw->gpio_cs_count; i++) { + hw->gpio_cs[i] = of_get_gpio_flags(np, i, NULL); + if (hw->gpio_cs[i] < 0) + return -ENODEV; + } + hw->bitbang.master->dev.of_node = pdev->dev.of_node; + val = of_get_property(pdev->dev.of_node, + "clock-frequency", &len); + if (val && len >= sizeof(__be32)) + hw->freq = be32_to_cpup(val); + val = of_get_property(pdev->dev.of_node, "baud-width", &len); + if (val && len >= sizeof(__be32)) + hw->baudwidth = be32_to_cpup(val); + return 0; +} +#else /* !CONFIG_OF */ +static int __devinit tiny_spi_of_probe(struct platform_device *pdev) +{ + return 0; +} +#endif /* CONFIG_OF */ + +static int __devinit tiny_spi_probe(struct platform_device *pdev) +{ + struct tiny_spi_platform_data *platp = pdev->dev.platform_data; + struct tiny_spi *hw; + struct spi_master *master; + struct resource *res; + unsigned int i; + int err = -ENODEV; + + master = spi_alloc_master(&pdev->dev, sizeof(struct tiny_spi)); + if (!master) + return err; + + /* setup the master state. */ + master->bus_num = pdev->id; + master->num_chipselect = 255; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->setup = tiny_spi_setup; + + hw = spi_master_get_devdata(master); + platform_set_drvdata(pdev, hw); + + /* setup the state for the bitbang driver */ + hw->bitbang.master = spi_master_get(master); + if (!hw->bitbang.master) + return err; + hw->bitbang.setup_transfer = tiny_spi_setup_transfer; + hw->bitbang.chipselect = tiny_spi_chipselect; + hw->bitbang.txrx_bufs = tiny_spi_txrx_bufs; + + /* find and map our resources */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + goto exit_busy; + if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), + pdev->name)) + goto exit_busy; + hw->base = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!hw->base) + goto exit_busy; + /* irq is optional */ + hw->irq = platform_get_irq(pdev, 0); + if (hw->irq >= 0) { + init_completion(&hw->done); + err = devm_request_irq(&pdev->dev, hw->irq, tiny_spi_irq, 0, + pdev->name, hw); + if (err) + goto exit; + } + /* find platform data */ + if (platp) { + hw->gpio_cs_count = platp->gpio_cs_count; + hw->gpio_cs = platp->gpio_cs; + if (platp->gpio_cs_count && !platp->gpio_cs) + goto exit_busy; + hw->freq = platp->freq; + hw->baudwidth = platp->baudwidth; + } else { + err = tiny_spi_of_probe(pdev); + if (err) + goto exit; + } + for (i = 0; i < hw->gpio_cs_count; i++) { + err = gpio_request(hw->gpio_cs[i], dev_name(&pdev->dev)); + if (err) + goto exit_gpio; + gpio_direction_output(hw->gpio_cs[i], 1); + } + hw->bitbang.master->num_chipselect = max(1U, hw->gpio_cs_count); + + /* register our spi controller */ + err = spi_bitbang_start(&hw->bitbang); + if (err) + goto exit; + dev_info(&pdev->dev, "base %p, irq %d\n", hw->base, hw->irq); + + return 0; + +exit_gpio: + while (i-- > 0) + gpio_free(hw->gpio_cs[i]); +exit_busy: + err = -EBUSY; +exit: + platform_set_drvdata(pdev, NULL); + spi_master_put(master); + return err; +} + +static int __devexit tiny_spi_remove(struct platform_device *pdev) +{ + struct tiny_spi *hw = platform_get_drvdata(pdev); + struct spi_master *master = hw->bitbang.master; + unsigned int i; + + spi_bitbang_stop(&hw->bitbang); + for (i = 0; i < hw->gpio_cs_count; i++) + gpio_free(hw->gpio_cs[i]); + platform_set_drvdata(pdev, NULL); + spi_master_put(master); + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id tiny_spi_match[] = { + { .compatible = "opencores,tiny-spi-rtlsvn2", }, + {}, +}; +MODULE_DEVICE_TABLE(of, tiny_spi_match); +#else /* CONFIG_OF */ +#define tiny_spi_match NULL +#endif /* CONFIG_OF */ + +static struct platform_driver tiny_spi_driver = { + .probe = tiny_spi_probe, + .remove = __devexit_p(tiny_spi_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .pm = NULL, + .of_match_table = tiny_spi_match, + }, +}; + +static int __init tiny_spi_init(void) +{ + return platform_driver_register(&tiny_spi_driver); +} +module_init(tiny_spi_init); + +static void __exit tiny_spi_exit(void) +{ + platform_driver_unregister(&tiny_spi_driver); +} +module_exit(tiny_spi_exit); + +MODULE_DESCRIPTION("OpenCores tiny SPI driver"); +MODULE_AUTHOR("Thomas Chou "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c new file mode 100644 index 000000000000..9bd1c92ad96e --- /dev/null +++ b/drivers/spi/spi-omap-100k.c @@ -0,0 +1,637 @@ +/* + * OMAP7xx SPI 100k controller driver + * Author: Fabrice Crohas + * from original omap1_mcspi driver + * + * Copyright (C) 2005, 2006 Nokia Corporation + * Author: Samuel Ortiz and + * Juha Yrj�l� + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#define OMAP1_SPI100K_MAX_FREQ 48000000 + +#define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12) + +#define SPI_SETUP1 0x00 +#define SPI_SETUP2 0x02 +#define SPI_CTRL 0x04 +#define SPI_STATUS 0x06 +#define SPI_TX_LSB 0x08 +#define SPI_TX_MSB 0x0a +#define SPI_RX_LSB 0x0c +#define SPI_RX_MSB 0x0e + +#define SPI_SETUP1_INT_READ_ENABLE (1UL << 5) +#define SPI_SETUP1_INT_WRITE_ENABLE (1UL << 4) +#define SPI_SETUP1_CLOCK_DIVISOR(x) ((x) << 1) +#define SPI_SETUP1_CLOCK_ENABLE (1UL << 0) + +#define SPI_SETUP2_ACTIVE_EDGE_FALLING (0UL << 0) +#define SPI_SETUP2_ACTIVE_EDGE_RISING (1UL << 0) +#define SPI_SETUP2_NEGATIVE_LEVEL (0UL << 5) +#define SPI_SETUP2_POSITIVE_LEVEL (1UL << 5) +#define SPI_SETUP2_LEVEL_TRIGGER (0UL << 10) +#define SPI_SETUP2_EDGE_TRIGGER (1UL << 10) + +#define SPI_CTRL_SEN(x) ((x) << 7) +#define SPI_CTRL_WORD_SIZE(x) (((x) - 1) << 2) +#define SPI_CTRL_WR (1UL << 1) +#define SPI_CTRL_RD (1UL << 0) + +#define SPI_STATUS_WE (1UL << 1) +#define SPI_STATUS_RD (1UL << 0) + +#define WRITE 0 +#define READ 1 + + +/* use PIO for small transfers, avoiding DMA setup/teardown overhead and + * cache operations; better heuristics consider wordsize and bitrate. + */ +#define DMA_MIN_BYTES 8 + +#define SPI_RUNNING 0 +#define SPI_SHUTDOWN 1 + +struct omap1_spi100k { + struct work_struct work; + + /* lock protects queue and registers */ + spinlock_t lock; + struct list_head msg_queue; + struct spi_master *master; + struct clk *ick; + struct clk *fck; + + /* Virtual base address of the controller */ + void __iomem *base; + + /* State of the SPI */ + unsigned int state; +}; + +struct omap1_spi100k_cs { + void __iomem *base; + int word_len; +}; + +static struct workqueue_struct *omap1_spi100k_wq; + +#define MOD_REG_BIT(val, mask, set) do { \ + if (set) \ + val |= mask; \ + else \ + val &= ~mask; \ +} while (0) + +static void spi100k_enable_clock(struct spi_master *master) +{ + unsigned int val; + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + /* enable SPI */ + val = readw(spi100k->base + SPI_SETUP1); + val |= SPI_SETUP1_CLOCK_ENABLE; + writew(val, spi100k->base + SPI_SETUP1); +} + +static void spi100k_disable_clock(struct spi_master *master) +{ + unsigned int val; + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + /* disable SPI */ + val = readw(spi100k->base + SPI_SETUP1); + val &= ~SPI_SETUP1_CLOCK_ENABLE; + writew(val, spi100k->base + SPI_SETUP1); +} + +static void spi100k_write_data(struct spi_master *master, int len, int data) +{ + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + /* write 16-bit word, shifting 8-bit data if necessary */ + if (len <= 8) { + data <<= 8; + len = 16; + } + + spi100k_enable_clock(master); + writew( data , spi100k->base + SPI_TX_MSB); + + writew(SPI_CTRL_SEN(0) | + SPI_CTRL_WORD_SIZE(len) | + SPI_CTRL_WR, + spi100k->base + SPI_CTRL); + + /* Wait for bit ack send change */ + while((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_WE) != SPI_STATUS_WE); + udelay(1000); + + spi100k_disable_clock(master); +} + +static int spi100k_read_data(struct spi_master *master, int len) +{ + int dataH,dataL; + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + /* Always do at least 16 bits */ + if (len <= 8) + len = 16; + + spi100k_enable_clock(master); + writew(SPI_CTRL_SEN(0) | + SPI_CTRL_WORD_SIZE(len) | + SPI_CTRL_RD, + spi100k->base + SPI_CTRL); + + while((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_RD) != SPI_STATUS_RD); + udelay(1000); + + dataL = readw(spi100k->base + SPI_RX_LSB); + dataH = readw(spi100k->base + SPI_RX_MSB); + spi100k_disable_clock(master); + + return dataL; +} + +static void spi100k_open(struct spi_master *master) +{ + /* get control of SPI */ + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + writew(SPI_SETUP1_INT_READ_ENABLE | + SPI_SETUP1_INT_WRITE_ENABLE | + SPI_SETUP1_CLOCK_DIVISOR(0), spi100k->base + SPI_SETUP1); + + /* configure clock and interrupts */ + writew(SPI_SETUP2_ACTIVE_EDGE_FALLING | + SPI_SETUP2_NEGATIVE_LEVEL | + SPI_SETUP2_LEVEL_TRIGGER, spi100k->base + SPI_SETUP2); +} + +static void omap1_spi100k_force_cs(struct omap1_spi100k *spi100k, int enable) +{ + if (enable) + writew(0x05fc, spi100k->base + SPI_CTRL); + else + writew(0x05fd, spi100k->base + SPI_CTRL); +} + +static unsigned +omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) +{ + struct omap1_spi100k *spi100k; + struct omap1_spi100k_cs *cs = spi->controller_state; + unsigned int count, c; + int word_len; + + spi100k = spi_master_get_devdata(spi->master); + count = xfer->len; + c = count; + word_len = cs->word_len; + + if (word_len <= 8) { + u8 *rx; + const u8 *tx; + + rx = xfer->rx_buf; + tx = xfer->tx_buf; + do { + c-=1; + if (xfer->tx_buf != NULL) + spi100k_write_data(spi->master, word_len, *tx++); + if (xfer->rx_buf != NULL) + *rx++ = spi100k_read_data(spi->master, word_len); + } while(c); + } else if (word_len <= 16) { + u16 *rx; + const u16 *tx; + + rx = xfer->rx_buf; + tx = xfer->tx_buf; + do { + c-=2; + if (xfer->tx_buf != NULL) + spi100k_write_data(spi->master,word_len, *tx++); + if (xfer->rx_buf != NULL) + *rx++ = spi100k_read_data(spi->master,word_len); + } while(c); + } else if (word_len <= 32) { + u32 *rx; + const u32 *tx; + + rx = xfer->rx_buf; + tx = xfer->tx_buf; + do { + c-=4; + if (xfer->tx_buf != NULL) + spi100k_write_data(spi->master,word_len, *tx); + if (xfer->rx_buf != NULL) + *rx = spi100k_read_data(spi->master,word_len); + } while(c); + } + return count - c; +} + +/* called only when no transfer is active to this device */ +static int omap1_spi100k_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct omap1_spi100k *spi100k = spi_master_get_devdata(spi->master); + struct omap1_spi100k_cs *cs = spi->controller_state; + u8 word_len = spi->bits_per_word; + + if (t != NULL && t->bits_per_word) + word_len = t->bits_per_word; + if (!word_len) + word_len = 8; + + if (spi->bits_per_word > 32) + return -EINVAL; + cs->word_len = word_len; + + /* SPI init before transfer */ + writew(0x3e , spi100k->base + SPI_SETUP1); + writew(0x00 , spi100k->base + SPI_STATUS); + writew(0x3e , spi100k->base + SPI_CTRL); + + return 0; +} + +/* the spi->mode bits understood by this driver: */ +#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH) + +static int omap1_spi100k_setup(struct spi_device *spi) +{ + int ret; + struct omap1_spi100k *spi100k; + struct omap1_spi100k_cs *cs = spi->controller_state; + + if (spi->bits_per_word < 4 || spi->bits_per_word > 32) { + dev_dbg(&spi->dev, "setup: unsupported %d bit words\n", + spi->bits_per_word); + return -EINVAL; + } + + spi100k = spi_master_get_devdata(spi->master); + + if (!cs) { + cs = kzalloc(sizeof *cs, GFP_KERNEL); + if (!cs) + return -ENOMEM; + cs->base = spi100k->base + spi->chip_select * 0x14; + spi->controller_state = cs; + } + + spi100k_open(spi->master); + + clk_enable(spi100k->ick); + clk_enable(spi100k->fck); + + ret = omap1_spi100k_setup_transfer(spi, NULL); + + clk_disable(spi100k->ick); + clk_disable(spi100k->fck); + + return ret; +} + +static void omap1_spi100k_work(struct work_struct *work) +{ + struct omap1_spi100k *spi100k; + int status = 0; + + spi100k = container_of(work, struct omap1_spi100k, work); + spin_lock_irq(&spi100k->lock); + + clk_enable(spi100k->ick); + clk_enable(spi100k->fck); + + /* We only enable one channel at a time -- the one whose message is + * at the head of the queue -- although this controller would gladly + * arbitrate among multiple channels. This corresponds to "single + * channel" master mode. As a side effect, we need to manage the + * chipselect with the FORCE bit ... CS != channel enable. + */ + while (!list_empty(&spi100k->msg_queue)) { + struct spi_message *m; + struct spi_device *spi; + struct spi_transfer *t = NULL; + int cs_active = 0; + struct omap1_spi100k_cs *cs; + int par_override = 0; + + m = container_of(spi100k->msg_queue.next, struct spi_message, + queue); + + list_del_init(&m->queue); + spin_unlock_irq(&spi100k->lock); + + spi = m->spi; + cs = spi->controller_state; + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { + status = -EINVAL; + break; + } + if (par_override || t->speed_hz || t->bits_per_word) { + par_override = 1; + status = omap1_spi100k_setup_transfer(spi, t); + if (status < 0) + break; + if (!t->speed_hz && !t->bits_per_word) + par_override = 0; + } + + if (!cs_active) { + omap1_spi100k_force_cs(spi100k, 1); + cs_active = 1; + } + + if (t->len) { + unsigned count; + + count = omap1_spi100k_txrx_pio(spi, t); + m->actual_length += count; + + if (count != t->len) { + status = -EIO; + break; + } + } + + if (t->delay_usecs) + udelay(t->delay_usecs); + + /* ignore the "leave it on after last xfer" hint */ + + if (t->cs_change) { + omap1_spi100k_force_cs(spi100k, 0); + cs_active = 0; + } + } + + /* Restore defaults if they were overriden */ + if (par_override) { + par_override = 0; + status = omap1_spi100k_setup_transfer(spi, NULL); + } + + if (cs_active) + omap1_spi100k_force_cs(spi100k, 0); + + m->status = status; + m->complete(m->context); + + spin_lock_irq(&spi100k->lock); + } + + clk_disable(spi100k->ick); + clk_disable(spi100k->fck); + spin_unlock_irq(&spi100k->lock); + + if (status < 0) + printk(KERN_WARNING "spi transfer failed with %d\n", status); +} + +static int omap1_spi100k_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct omap1_spi100k *spi100k; + unsigned long flags; + struct spi_transfer *t; + + m->actual_length = 0; + m->status = -EINPROGRESS; + + spi100k = spi_master_get_devdata(spi->master); + + /* Don't accept new work if we're shutting down */ + if (spi100k->state == SPI_SHUTDOWN) + return -ESHUTDOWN; + + /* reject invalid messages and transfers */ + if (list_empty(&m->transfers) || !m->complete) + return -EINVAL; + + list_for_each_entry(t, &m->transfers, transfer_list) { + const void *tx_buf = t->tx_buf; + void *rx_buf = t->rx_buf; + unsigned len = t->len; + + if (t->speed_hz > OMAP1_SPI100K_MAX_FREQ + || (len && !(rx_buf || tx_buf)) + || (t->bits_per_word && + ( t->bits_per_word < 4 + || t->bits_per_word > 32))) { + dev_dbg(&spi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n", + t->speed_hz, + len, + tx_buf ? "tx" : "", + rx_buf ? "rx" : "", + t->bits_per_word); + return -EINVAL; + } + + if (t->speed_hz && t->speed_hz < OMAP1_SPI100K_MAX_FREQ/(1<<16)) { + dev_dbg(&spi->dev, "%d Hz max exceeds %d\n", + t->speed_hz, + OMAP1_SPI100K_MAX_FREQ/(1<<16)); + return -EINVAL; + } + + } + + spin_lock_irqsave(&spi100k->lock, flags); + list_add_tail(&m->queue, &spi100k->msg_queue); + queue_work(omap1_spi100k_wq, &spi100k->work); + spin_unlock_irqrestore(&spi100k->lock, flags); + + return 0; +} + +static int __init omap1_spi100k_reset(struct omap1_spi100k *spi100k) +{ + return 0; +} + +static int __devinit omap1_spi100k_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct omap1_spi100k *spi100k; + int status = 0; + + if (!pdev->id) + return -EINVAL; + + master = spi_alloc_master(&pdev->dev, sizeof *spi100k); + if (master == NULL) { + dev_dbg(&pdev->dev, "master allocation failed\n"); + return -ENOMEM; + } + + if (pdev->id != -1) + master->bus_num = pdev->id; + + master->setup = omap1_spi100k_setup; + master->transfer = omap1_spi100k_transfer; + master->cleanup = NULL; + master->num_chipselect = 2; + master->mode_bits = MODEBITS; + + dev_set_drvdata(&pdev->dev, master); + + spi100k = spi_master_get_devdata(master); + spi100k->master = master; + + /* + * The memory region base address is taken as the platform_data. + * You should allocate this with ioremap() before initializing + * the SPI. + */ + spi100k->base = (void __iomem *) pdev->dev.platform_data; + + INIT_WORK(&spi100k->work, omap1_spi100k_work); + + spin_lock_init(&spi100k->lock); + INIT_LIST_HEAD(&spi100k->msg_queue); + spi100k->ick = clk_get(&pdev->dev, "ick"); + if (IS_ERR(spi100k->ick)) { + dev_dbg(&pdev->dev, "can't get spi100k_ick\n"); + status = PTR_ERR(spi100k->ick); + goto err1; + } + + spi100k->fck = clk_get(&pdev->dev, "fck"); + if (IS_ERR(spi100k->fck)) { + dev_dbg(&pdev->dev, "can't get spi100k_fck\n"); + status = PTR_ERR(spi100k->fck); + goto err2; + } + + if (omap1_spi100k_reset(spi100k) < 0) + goto err3; + + status = spi_register_master(master); + if (status < 0) + goto err3; + + spi100k->state = SPI_RUNNING; + + return status; + +err3: + clk_put(spi100k->fck); +err2: + clk_put(spi100k->ick); +err1: + spi_master_put(master); + return status; +} + +static int __exit omap1_spi100k_remove(struct platform_device *pdev) +{ + struct spi_master *master; + struct omap1_spi100k *spi100k; + struct resource *r; + unsigned limit = 500; + unsigned long flags; + int status = 0; + + master = dev_get_drvdata(&pdev->dev); + spi100k = spi_master_get_devdata(master); + + spin_lock_irqsave(&spi100k->lock, flags); + + spi100k->state = SPI_SHUTDOWN; + while (!list_empty(&spi100k->msg_queue) && limit--) { + spin_unlock_irqrestore(&spi100k->lock, flags); + msleep(10); + spin_lock_irqsave(&spi100k->lock, flags); + } + + if (!list_empty(&spi100k->msg_queue)) + status = -EBUSY; + + spin_unlock_irqrestore(&spi100k->lock, flags); + + if (status != 0) + return status; + + clk_put(spi100k->fck); + clk_put(spi100k->ick); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + spi_unregister_master(master); + + return 0; +} + +static struct platform_driver omap1_spi100k_driver = { + .driver = { + .name = "omap1_spi100k", + .owner = THIS_MODULE, + }, + .remove = __exit_p(omap1_spi100k_remove), +}; + + +static int __init omap1_spi100k_init(void) +{ + omap1_spi100k_wq = create_singlethread_workqueue( + omap1_spi100k_driver.driver.name); + + if (omap1_spi100k_wq == NULL) + return -1; + + return platform_driver_probe(&omap1_spi100k_driver, omap1_spi100k_probe); +} + +static void __exit omap1_spi100k_exit(void) +{ + platform_driver_unregister(&omap1_spi100k_driver); + + destroy_workqueue(omap1_spi100k_wq); +} + +module_init(omap1_spi100k_init); +module_exit(omap1_spi100k_exit); + +MODULE_DESCRIPTION("OMAP7xx SPI 100k controller driver"); +MODULE_AUTHOR("Fabrice Crohas "); +MODULE_LICENSE("GPL"); + diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c new file mode 100644 index 000000000000..00a8e9d7dbe4 --- /dev/null +++ b/drivers/spi/spi-omap-uwire.c @@ -0,0 +1,593 @@ +/* + * MicroWire interface driver for OMAP + * + * Copyright 2003 MontaVista Software Inc. + * + * Ported to 2.6 OMAP uwire interface. + * Copyright (C) 2004 Texas Instruments. + * + * Generalization patches by Juha Yrjola + * + * Copyright (C) 2005 David Brownell (ported to 2.6 SPI interface) + * Copyright (C) 2006 Nokia + * + * Many updates by Imre Deak + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include + +#include +#include /* OMAP7XX_IO_CONF registers */ + + +/* FIXME address is now a platform device resource, + * and irqs should show there too... + */ +#define UWIRE_BASE_PHYS 0xFFFB3000 + +/* uWire Registers: */ +#define UWIRE_IO_SIZE 0x20 +#define UWIRE_TDR 0x00 +#define UWIRE_RDR 0x00 +#define UWIRE_CSR 0x01 +#define UWIRE_SR1 0x02 +#define UWIRE_SR2 0x03 +#define UWIRE_SR3 0x04 +#define UWIRE_SR4 0x05 +#define UWIRE_SR5 0x06 + +/* CSR bits */ +#define RDRB (1 << 15) +#define CSRB (1 << 14) +#define START (1 << 13) +#define CS_CMD (1 << 12) + +/* SR1 or SR2 bits */ +#define UWIRE_READ_FALLING_EDGE 0x0001 +#define UWIRE_READ_RISING_EDGE 0x0000 +#define UWIRE_WRITE_FALLING_EDGE 0x0000 +#define UWIRE_WRITE_RISING_EDGE 0x0002 +#define UWIRE_CS_ACTIVE_LOW 0x0000 +#define UWIRE_CS_ACTIVE_HIGH 0x0004 +#define UWIRE_FREQ_DIV_2 0x0000 +#define UWIRE_FREQ_DIV_4 0x0008 +#define UWIRE_FREQ_DIV_8 0x0010 +#define UWIRE_CHK_READY 0x0020 +#define UWIRE_CLK_INVERTED 0x0040 + + +struct uwire_spi { + struct spi_bitbang bitbang; + struct clk *ck; +}; + +struct uwire_state { + unsigned bits_per_word; + unsigned div1_idx; +}; + +/* REVISIT compile time constant for idx_shift? */ +/* + * Or, put it in a structure which is used throughout the driver; + * that avoids having to issue two loads for each bit of static data. + */ +static unsigned int uwire_idx_shift; +static void __iomem *uwire_base; + +static inline void uwire_write_reg(int idx, u16 val) +{ + __raw_writew(val, uwire_base + (idx << uwire_idx_shift)); +} + +static inline u16 uwire_read_reg(int idx) +{ + return __raw_readw(uwire_base + (idx << uwire_idx_shift)); +} + +static inline void omap_uwire_configure_mode(u8 cs, unsigned long flags) +{ + u16 w, val = 0; + int shift, reg; + + if (flags & UWIRE_CLK_INVERTED) + val ^= 0x03; + val = flags & 0x3f; + if (cs & 1) + shift = 6; + else + shift = 0; + if (cs <= 1) + reg = UWIRE_SR1; + else + reg = UWIRE_SR2; + + w = uwire_read_reg(reg); + w &= ~(0x3f << shift); + w |= val << shift; + uwire_write_reg(reg, w); +} + +static int wait_uwire_csr_flag(u16 mask, u16 val, int might_not_catch) +{ + u16 w; + int c = 0; + unsigned long max_jiffies = jiffies + HZ; + + for (;;) { + w = uwire_read_reg(UWIRE_CSR); + if ((w & mask) == val) + break; + if (time_after(jiffies, max_jiffies)) { + printk(KERN_ERR "%s: timeout. reg=%#06x " + "mask=%#06x val=%#06x\n", + __func__, w, mask, val); + return -1; + } + c++; + if (might_not_catch && c > 64) + break; + } + return 0; +} + +static void uwire_set_clk1_div(int div1_idx) +{ + u16 w; + + w = uwire_read_reg(UWIRE_SR3); + w &= ~(0x03 << 1); + w |= div1_idx << 1; + uwire_write_reg(UWIRE_SR3, w); +} + +static void uwire_chipselect(struct spi_device *spi, int value) +{ + struct uwire_state *ust = spi->controller_state; + u16 w; + int old_cs; + + + BUG_ON(wait_uwire_csr_flag(CSRB, 0, 0)); + + w = uwire_read_reg(UWIRE_CSR); + old_cs = (w >> 10) & 0x03; + if (value == BITBANG_CS_INACTIVE || old_cs != spi->chip_select) { + /* Deselect this CS, or the previous CS */ + w &= ~CS_CMD; + uwire_write_reg(UWIRE_CSR, w); + } + /* activate specfied chipselect */ + if (value == BITBANG_CS_ACTIVE) { + uwire_set_clk1_div(ust->div1_idx); + /* invert clock? */ + if (spi->mode & SPI_CPOL) + uwire_write_reg(UWIRE_SR4, 1); + else + uwire_write_reg(UWIRE_SR4, 0); + + w = spi->chip_select << 10; + w |= CS_CMD; + uwire_write_reg(UWIRE_CSR, w); + } +} + +static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t) +{ + struct uwire_state *ust = spi->controller_state; + unsigned len = t->len; + unsigned bits = ust->bits_per_word; + unsigned bytes; + u16 val, w; + int status = 0; + + if (!t->tx_buf && !t->rx_buf) + return 0; + + /* Microwire doesn't read and write concurrently */ + if (t->tx_buf && t->rx_buf) + return -EPERM; + + w = spi->chip_select << 10; + w |= CS_CMD; + + if (t->tx_buf) { + const u8 *buf = t->tx_buf; + + /* NOTE: DMA could be used for TX transfers */ + + /* write one or two bytes at a time */ + while (len >= 1) { + /* tx bit 15 is first sent; we byteswap multibyte words + * (msb-first) on the way out from memory. + */ + val = *buf++; + if (bits > 8) { + bytes = 2; + val |= *buf++ << 8; + } else + bytes = 1; + val <<= 16 - bits; + +#ifdef VERBOSE + pr_debug("%s: write-%d =%04x\n", + dev_name(&spi->dev), bits, val); +#endif + if (wait_uwire_csr_flag(CSRB, 0, 0)) + goto eio; + + uwire_write_reg(UWIRE_TDR, val); + + /* start write */ + val = START | w | (bits << 5); + + uwire_write_reg(UWIRE_CSR, val); + len -= bytes; + + /* Wait till write actually starts. + * This is needed with MPU clock 60+ MHz. + * REVISIT: we may not have time to catch it... + */ + if (wait_uwire_csr_flag(CSRB, CSRB, 1)) + goto eio; + + status += bytes; + } + + /* REVISIT: save this for later to get more i/o overlap */ + if (wait_uwire_csr_flag(CSRB, 0, 0)) + goto eio; + + } else if (t->rx_buf) { + u8 *buf = t->rx_buf; + + /* read one or two bytes at a time */ + while (len) { + if (bits > 8) { + bytes = 2; + } else + bytes = 1; + + /* start read */ + val = START | w | (bits << 0); + uwire_write_reg(UWIRE_CSR, val); + len -= bytes; + + /* Wait till read actually starts */ + (void) wait_uwire_csr_flag(CSRB, CSRB, 1); + + if (wait_uwire_csr_flag(RDRB | CSRB, + RDRB, 0)) + goto eio; + + /* rx bit 0 is last received; multibyte words will + * be properly byteswapped on the way to memory. + */ + val = uwire_read_reg(UWIRE_RDR); + val &= (1 << bits) - 1; + *buf++ = (u8) val; + if (bytes == 2) + *buf++ = val >> 8; + status += bytes; +#ifdef VERBOSE + pr_debug("%s: read-%d =%04x\n", + dev_name(&spi->dev), bits, val); +#endif + + } + } + return status; +eio: + return -EIO; +} + +static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct uwire_state *ust = spi->controller_state; + struct uwire_spi *uwire; + unsigned flags = 0; + unsigned bits; + unsigned hz; + unsigned long rate; + int div1_idx; + int div1; + int div2; + int status; + + uwire = spi_master_get_devdata(spi->master); + + if (spi->chip_select > 3) { + pr_debug("%s: cs%d?\n", dev_name(&spi->dev), spi->chip_select); + status = -ENODEV; + goto done; + } + + bits = spi->bits_per_word; + if (t != NULL && t->bits_per_word) + bits = t->bits_per_word; + + if (bits > 16) { + pr_debug("%s: wordsize %d?\n", dev_name(&spi->dev), bits); + status = -ENODEV; + goto done; + } + ust->bits_per_word = bits; + + /* mode 0..3, clock inverted separately; + * standard nCS signaling; + * don't treat DI=high as "not ready" + */ + if (spi->mode & SPI_CS_HIGH) + flags |= UWIRE_CS_ACTIVE_HIGH; + + if (spi->mode & SPI_CPOL) + flags |= UWIRE_CLK_INVERTED; + + switch (spi->mode & (SPI_CPOL | SPI_CPHA)) { + case SPI_MODE_0: + case SPI_MODE_3: + flags |= UWIRE_WRITE_FALLING_EDGE | UWIRE_READ_RISING_EDGE; + break; + case SPI_MODE_1: + case SPI_MODE_2: + flags |= UWIRE_WRITE_RISING_EDGE | UWIRE_READ_FALLING_EDGE; + break; + } + + /* assume it's already enabled */ + rate = clk_get_rate(uwire->ck); + + hz = spi->max_speed_hz; + if (t != NULL && t->speed_hz) + hz = t->speed_hz; + + if (!hz) { + pr_debug("%s: zero speed?\n", dev_name(&spi->dev)); + status = -EINVAL; + goto done; + } + + /* F_INT = mpu_xor_clk / DIV1 */ + for (div1_idx = 0; div1_idx < 4; div1_idx++) { + switch (div1_idx) { + case 0: + div1 = 2; + break; + case 1: + div1 = 4; + break; + case 2: + div1 = 7; + break; + default: + case 3: + div1 = 10; + break; + } + div2 = (rate / div1 + hz - 1) / hz; + if (div2 <= 8) + break; + } + if (div1_idx == 4) { + pr_debug("%s: lowest clock %ld, need %d\n", + dev_name(&spi->dev), rate / 10 / 8, hz); + status = -EDOM; + goto done; + } + + /* we have to cache this and reset in uwire_chipselect as this is a + * global parameter and another uwire device can change it under + * us */ + ust->div1_idx = div1_idx; + uwire_set_clk1_div(div1_idx); + + rate /= div1; + + switch (div2) { + case 0: + case 1: + case 2: + flags |= UWIRE_FREQ_DIV_2; + rate /= 2; + break; + case 3: + case 4: + flags |= UWIRE_FREQ_DIV_4; + rate /= 4; + break; + case 5: + case 6: + case 7: + case 8: + flags |= UWIRE_FREQ_DIV_8; + rate /= 8; + break; + } + omap_uwire_configure_mode(spi->chip_select, flags); + pr_debug("%s: uwire flags %02x, armxor %lu KHz, SCK %lu KHz\n", + __func__, flags, + clk_get_rate(uwire->ck) / 1000, + rate / 1000); + status = 0; +done: + return status; +} + +static int uwire_setup(struct spi_device *spi) +{ + struct uwire_state *ust = spi->controller_state; + + if (ust == NULL) { + ust = kzalloc(sizeof(*ust), GFP_KERNEL); + if (ust == NULL) + return -ENOMEM; + spi->controller_state = ust; + } + + return uwire_setup_transfer(spi, NULL); +} + +static void uwire_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} + +static void uwire_off(struct uwire_spi *uwire) +{ + uwire_write_reg(UWIRE_SR3, 0); + clk_disable(uwire->ck); + clk_put(uwire->ck); + spi_master_put(uwire->bitbang.master); +} + +static int __init uwire_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct uwire_spi *uwire; + int status; + + master = spi_alloc_master(&pdev->dev, sizeof *uwire); + if (!master) + return -ENODEV; + + uwire = spi_master_get_devdata(master); + + uwire_base = ioremap(UWIRE_BASE_PHYS, UWIRE_IO_SIZE); + if (!uwire_base) { + dev_dbg(&pdev->dev, "can't ioremap UWIRE\n"); + spi_master_put(master); + return -ENOMEM; + } + + dev_set_drvdata(&pdev->dev, uwire); + + uwire->ck = clk_get(&pdev->dev, "fck"); + if (IS_ERR(uwire->ck)) { + status = PTR_ERR(uwire->ck); + dev_dbg(&pdev->dev, "no functional clock?\n"); + spi_master_put(master); + return status; + } + clk_enable(uwire->ck); + + if (cpu_is_omap7xx()) + uwire_idx_shift = 1; + else + uwire_idx_shift = 2; + + uwire_write_reg(UWIRE_SR3, 1); + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + master->flags = SPI_MASTER_HALF_DUPLEX; + + master->bus_num = 2; /* "official" */ + master->num_chipselect = 4; + master->setup = uwire_setup; + master->cleanup = uwire_cleanup; + + uwire->bitbang.master = master; + uwire->bitbang.chipselect = uwire_chipselect; + uwire->bitbang.setup_transfer = uwire_setup_transfer; + uwire->bitbang.txrx_bufs = uwire_txrx; + + status = spi_bitbang_start(&uwire->bitbang); + if (status < 0) { + uwire_off(uwire); + iounmap(uwire_base); + } + return status; +} + +static int __exit uwire_remove(struct platform_device *pdev) +{ + struct uwire_spi *uwire = dev_get_drvdata(&pdev->dev); + int status; + + // FIXME remove all child devices, somewhere ... + + status = spi_bitbang_stop(&uwire->bitbang); + uwire_off(uwire); + iounmap(uwire_base); + return status; +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:omap_uwire"); + +static struct platform_driver uwire_driver = { + .driver = { + .name = "omap_uwire", + .owner = THIS_MODULE, + }, + .remove = __exit_p(uwire_remove), + // suspend ... unuse ck + // resume ... use ck +}; + +static int __init omap_uwire_init(void) +{ + /* FIXME move these into the relevant board init code. also, include + * H3 support; it uses tsc2101 like H2 (on a different chipselect). + */ + + if (machine_is_omap_h2()) { + /* defaults: W21 SDO, U18 SDI, V19 SCL */ + omap_cfg_reg(N14_1610_UWIRE_CS0); + omap_cfg_reg(N15_1610_UWIRE_CS1); + } + if (machine_is_omap_perseus2()) { + /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */ + int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000; + omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9); + } + + return platform_driver_probe(&uwire_driver, uwire_probe); +} + +static void __exit omap_uwire_exit(void) +{ + platform_driver_unregister(&uwire_driver); +} + +subsys_initcall(omap_uwire_init); +module_exit(omap_uwire_exit); + +MODULE_LICENSE("GPL"); + diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c new file mode 100644 index 000000000000..969cdd2fe124 --- /dev/null +++ b/drivers/spi/spi-omap2-mcspi.c @@ -0,0 +1,1293 @@ +/* + * OMAP2 McSPI controller driver + * + * Copyright (C) 2005, 2006 Nokia Corporation + * Author: Samuel Ortiz and + * Juha Yrj�l� + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#define OMAP2_MCSPI_MAX_FREQ 48000000 + +/* OMAP2 has 3 SPI controllers, while OMAP3 has 4 */ +#define OMAP2_MCSPI_MAX_CTRL 4 + +#define OMAP2_MCSPI_REVISION 0x00 +#define OMAP2_MCSPI_SYSSTATUS 0x14 +#define OMAP2_MCSPI_IRQSTATUS 0x18 +#define OMAP2_MCSPI_IRQENABLE 0x1c +#define OMAP2_MCSPI_WAKEUPENABLE 0x20 +#define OMAP2_MCSPI_SYST 0x24 +#define OMAP2_MCSPI_MODULCTRL 0x28 + +/* per-channel banks, 0x14 bytes each, first is: */ +#define OMAP2_MCSPI_CHCONF0 0x2c +#define OMAP2_MCSPI_CHSTAT0 0x30 +#define OMAP2_MCSPI_CHCTRL0 0x34 +#define OMAP2_MCSPI_TX0 0x38 +#define OMAP2_MCSPI_RX0 0x3c + +/* per-register bitmasks: */ + +#define OMAP2_MCSPI_MODULCTRL_SINGLE BIT(0) +#define OMAP2_MCSPI_MODULCTRL_MS BIT(2) +#define OMAP2_MCSPI_MODULCTRL_STEST BIT(3) + +#define OMAP2_MCSPI_CHCONF_PHA BIT(0) +#define OMAP2_MCSPI_CHCONF_POL BIT(1) +#define OMAP2_MCSPI_CHCONF_CLKD_MASK (0x0f << 2) +#define OMAP2_MCSPI_CHCONF_EPOL BIT(6) +#define OMAP2_MCSPI_CHCONF_WL_MASK (0x1f << 7) +#define OMAP2_MCSPI_CHCONF_TRM_RX_ONLY BIT(12) +#define OMAP2_MCSPI_CHCONF_TRM_TX_ONLY BIT(13) +#define OMAP2_MCSPI_CHCONF_TRM_MASK (0x03 << 12) +#define OMAP2_MCSPI_CHCONF_DMAW BIT(14) +#define OMAP2_MCSPI_CHCONF_DMAR BIT(15) +#define OMAP2_MCSPI_CHCONF_DPE0 BIT(16) +#define OMAP2_MCSPI_CHCONF_DPE1 BIT(17) +#define OMAP2_MCSPI_CHCONF_IS BIT(18) +#define OMAP2_MCSPI_CHCONF_TURBO BIT(19) +#define OMAP2_MCSPI_CHCONF_FORCE BIT(20) + +#define OMAP2_MCSPI_CHSTAT_RXS BIT(0) +#define OMAP2_MCSPI_CHSTAT_TXS BIT(1) +#define OMAP2_MCSPI_CHSTAT_EOT BIT(2) + +#define OMAP2_MCSPI_CHCTRL_EN BIT(0) + +#define OMAP2_MCSPI_WAKEUPENABLE_WKEN BIT(0) + +/* We have 2 DMA channels per CS, one for RX and one for TX */ +struct omap2_mcspi_dma { + int dma_tx_channel; + int dma_rx_channel; + + int dma_tx_sync_dev; + int dma_rx_sync_dev; + + struct completion dma_tx_completion; + struct completion dma_rx_completion; +}; + +/* use PIO for small transfers, avoiding DMA setup/teardown overhead and + * cache operations; better heuristics consider wordsize and bitrate. + */ +#define DMA_MIN_BYTES 160 + + +struct omap2_mcspi { + struct work_struct work; + /* lock protects queue and registers */ + spinlock_t lock; + struct list_head msg_queue; + struct spi_master *master; + /* Virtual base address of the controller */ + void __iomem *base; + unsigned long phys; + /* SPI1 has 4 channels, while SPI2 has 2 */ + struct omap2_mcspi_dma *dma_channels; + struct device *dev; +}; + +struct omap2_mcspi_cs { + void __iomem *base; + unsigned long phys; + int word_len; + struct list_head node; + /* Context save and restore shadow register */ + u32 chconf0; +}; + +/* used for context save and restore, structure members to be updated whenever + * corresponding registers are modified. + */ +struct omap2_mcspi_regs { + u32 modulctrl; + u32 wakeupenable; + struct list_head cs; +}; + +static struct omap2_mcspi_regs omap2_mcspi_ctx[OMAP2_MCSPI_MAX_CTRL]; + +static struct workqueue_struct *omap2_mcspi_wq; + +#define MOD_REG_BIT(val, mask, set) do { \ + if (set) \ + val |= mask; \ + else \ + val &= ~mask; \ +} while (0) + +static inline void mcspi_write_reg(struct spi_master *master, + int idx, u32 val) +{ + struct omap2_mcspi *mcspi = spi_master_get_devdata(master); + + __raw_writel(val, mcspi->base + idx); +} + +static inline u32 mcspi_read_reg(struct spi_master *master, int idx) +{ + struct omap2_mcspi *mcspi = spi_master_get_devdata(master); + + return __raw_readl(mcspi->base + idx); +} + +static inline void mcspi_write_cs_reg(const struct spi_device *spi, + int idx, u32 val) +{ + struct omap2_mcspi_cs *cs = spi->controller_state; + + __raw_writel(val, cs->base + idx); +} + +static inline u32 mcspi_read_cs_reg(const struct spi_device *spi, int idx) +{ + struct omap2_mcspi_cs *cs = spi->controller_state; + + return __raw_readl(cs->base + idx); +} + +static inline u32 mcspi_cached_chconf0(const struct spi_device *spi) +{ + struct omap2_mcspi_cs *cs = spi->controller_state; + + return cs->chconf0; +} + +static inline void mcspi_write_chconf0(const struct spi_device *spi, u32 val) +{ + struct omap2_mcspi_cs *cs = spi->controller_state; + + cs->chconf0 = val; + mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val); + mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); +} + +static void omap2_mcspi_set_dma_req(const struct spi_device *spi, + int is_read, int enable) +{ + u32 l, rw; + + l = mcspi_cached_chconf0(spi); + + if (is_read) /* 1 is read, 0 write */ + rw = OMAP2_MCSPI_CHCONF_DMAR; + else + rw = OMAP2_MCSPI_CHCONF_DMAW; + + MOD_REG_BIT(l, rw, enable); + mcspi_write_chconf0(spi, l); +} + +static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable) +{ + u32 l; + + l = enable ? OMAP2_MCSPI_CHCTRL_EN : 0; + mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCTRL0, l); + /* Flash post-writes */ + mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCTRL0); +} + +static void omap2_mcspi_force_cs(struct spi_device *spi, int cs_active) +{ + u32 l; + + l = mcspi_cached_chconf0(spi); + MOD_REG_BIT(l, OMAP2_MCSPI_CHCONF_FORCE, cs_active); + mcspi_write_chconf0(spi, l); +} + +static void omap2_mcspi_set_master_mode(struct spi_master *master) +{ + u32 l; + + /* setup when switching from (reset default) slave mode + * to single-channel master mode + */ + l = mcspi_read_reg(master, OMAP2_MCSPI_MODULCTRL); + MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_STEST, 0); + MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_MS, 0); + MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_SINGLE, 1); + mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, l); + + omap2_mcspi_ctx[master->bus_num - 1].modulctrl = l; +} + +static void omap2_mcspi_restore_ctx(struct omap2_mcspi *mcspi) +{ + struct spi_master *spi_cntrl; + struct omap2_mcspi_cs *cs; + spi_cntrl = mcspi->master; + + /* McSPI: context restore */ + mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_MODULCTRL, + omap2_mcspi_ctx[spi_cntrl->bus_num - 1].modulctrl); + + mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_WAKEUPENABLE, + omap2_mcspi_ctx[spi_cntrl->bus_num - 1].wakeupenable); + + list_for_each_entry(cs, &omap2_mcspi_ctx[spi_cntrl->bus_num - 1].cs, + node) + __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); +} +static void omap2_mcspi_disable_clocks(struct omap2_mcspi *mcspi) +{ + pm_runtime_put_sync(mcspi->dev); +} + +static int omap2_mcspi_enable_clocks(struct omap2_mcspi *mcspi) +{ + return pm_runtime_get_sync(mcspi->dev); +} + +static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) +{ + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(1000); + while (!(__raw_readl(reg) & bit)) { + if (time_after(jiffies, timeout)) + return -1; + cpu_relax(); + } + return 0; +} + +static unsigned +omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) +{ + struct omap2_mcspi *mcspi; + struct omap2_mcspi_cs *cs = spi->controller_state; + struct omap2_mcspi_dma *mcspi_dma; + unsigned int count, c; + unsigned long base, tx_reg, rx_reg; + int word_len, data_type, element_count; + int elements = 0; + u32 l; + u8 * rx; + const u8 * tx; + void __iomem *chstat_reg; + + mcspi = spi_master_get_devdata(spi->master); + mcspi_dma = &mcspi->dma_channels[spi->chip_select]; + l = mcspi_cached_chconf0(spi); + + chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; + + count = xfer->len; + c = count; + word_len = cs->word_len; + + base = cs->phys; + tx_reg = base + OMAP2_MCSPI_TX0; + rx_reg = base + OMAP2_MCSPI_RX0; + rx = xfer->rx_buf; + tx = xfer->tx_buf; + + if (word_len <= 8) { + data_type = OMAP_DMA_DATA_TYPE_S8; + element_count = count; + } else if (word_len <= 16) { + data_type = OMAP_DMA_DATA_TYPE_S16; + element_count = count >> 1; + } else /* word_len <= 32 */ { + data_type = OMAP_DMA_DATA_TYPE_S32; + element_count = count >> 2; + } + + if (tx != NULL) { + omap_set_dma_transfer_params(mcspi_dma->dma_tx_channel, + data_type, element_count, 1, + OMAP_DMA_SYNC_ELEMENT, + mcspi_dma->dma_tx_sync_dev, 0); + + omap_set_dma_dest_params(mcspi_dma->dma_tx_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + tx_reg, 0, 0); + + omap_set_dma_src_params(mcspi_dma->dma_tx_channel, 0, + OMAP_DMA_AMODE_POST_INC, + xfer->tx_dma, 0, 0); + } + + if (rx != NULL) { + elements = element_count - 1; + if (l & OMAP2_MCSPI_CHCONF_TURBO) + elements--; + + omap_set_dma_transfer_params(mcspi_dma->dma_rx_channel, + data_type, elements, 1, + OMAP_DMA_SYNC_ELEMENT, + mcspi_dma->dma_rx_sync_dev, 1); + + omap_set_dma_src_params(mcspi_dma->dma_rx_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + rx_reg, 0, 0); + + omap_set_dma_dest_params(mcspi_dma->dma_rx_channel, 0, + OMAP_DMA_AMODE_POST_INC, + xfer->rx_dma, 0, 0); + } + + if (tx != NULL) { + omap_start_dma(mcspi_dma->dma_tx_channel); + omap2_mcspi_set_dma_req(spi, 0, 1); + } + + if (rx != NULL) { + omap_start_dma(mcspi_dma->dma_rx_channel); + omap2_mcspi_set_dma_req(spi, 1, 1); + } + + if (tx != NULL) { + wait_for_completion(&mcspi_dma->dma_tx_completion); + dma_unmap_single(&spi->dev, xfer->tx_dma, count, DMA_TO_DEVICE); + + /* for TX_ONLY mode, be sure all words have shifted out */ + if (rx == NULL) { + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_TXS) < 0) + dev_err(&spi->dev, "TXS timed out\n"); + else if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_EOT) < 0) + dev_err(&spi->dev, "EOT timed out\n"); + } + } + + if (rx != NULL) { + wait_for_completion(&mcspi_dma->dma_rx_completion); + dma_unmap_single(&spi->dev, xfer->rx_dma, count, DMA_FROM_DEVICE); + omap2_mcspi_set_enable(spi, 0); + + if (l & OMAP2_MCSPI_CHCONF_TURBO) { + + if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0) + & OMAP2_MCSPI_CHSTAT_RXS)) { + u32 w; + + w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0); + if (word_len <= 8) + ((u8 *)xfer->rx_buf)[elements++] = w; + else if (word_len <= 16) + ((u16 *)xfer->rx_buf)[elements++] = w; + else /* word_len <= 32 */ + ((u32 *)xfer->rx_buf)[elements++] = w; + } else { + dev_err(&spi->dev, + "DMA RX penultimate word empty"); + count -= (word_len <= 8) ? 2 : + (word_len <= 16) ? 4 : + /* word_len <= 32 */ 8; + omap2_mcspi_set_enable(spi, 1); + return count; + } + } + + if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0) + & OMAP2_MCSPI_CHSTAT_RXS)) { + u32 w; + + w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0); + if (word_len <= 8) + ((u8 *)xfer->rx_buf)[elements] = w; + else if (word_len <= 16) + ((u16 *)xfer->rx_buf)[elements] = w; + else /* word_len <= 32 */ + ((u32 *)xfer->rx_buf)[elements] = w; + } else { + dev_err(&spi->dev, "DMA RX last word empty"); + count -= (word_len <= 8) ? 1 : + (word_len <= 16) ? 2 : + /* word_len <= 32 */ 4; + } + omap2_mcspi_set_enable(spi, 1); + } + return count; +} + +static unsigned +omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) +{ + struct omap2_mcspi *mcspi; + struct omap2_mcspi_cs *cs = spi->controller_state; + unsigned int count, c; + u32 l; + void __iomem *base = cs->base; + void __iomem *tx_reg; + void __iomem *rx_reg; + void __iomem *chstat_reg; + int word_len; + + mcspi = spi_master_get_devdata(spi->master); + count = xfer->len; + c = count; + word_len = cs->word_len; + + l = mcspi_cached_chconf0(spi); + + /* We store the pre-calculated register addresses on stack to speed + * up the transfer loop. */ + tx_reg = base + OMAP2_MCSPI_TX0; + rx_reg = base + OMAP2_MCSPI_RX0; + chstat_reg = base + OMAP2_MCSPI_CHSTAT0; + + if (c < (word_len>>3)) + return 0; + + if (word_len <= 8) { + u8 *rx; + const u8 *tx; + + rx = xfer->rx_buf; + tx = xfer->tx_buf; + + do { + c -= 1; + if (tx != NULL) { + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_TXS) < 0) { + dev_err(&spi->dev, "TXS timed out\n"); + goto out; + } + dev_vdbg(&spi->dev, "write-%d %02x\n", + word_len, *tx); + __raw_writel(*tx++, tx_reg); + } + if (rx != NULL) { + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_RXS) < 0) { + dev_err(&spi->dev, "RXS timed out\n"); + goto out; + } + + if (c == 1 && tx == NULL && + (l & OMAP2_MCSPI_CHCONF_TURBO)) { + omap2_mcspi_set_enable(spi, 0); + *rx++ = __raw_readl(rx_reg); + dev_vdbg(&spi->dev, "read-%d %02x\n", + word_len, *(rx - 1)); + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_RXS) < 0) { + dev_err(&spi->dev, + "RXS timed out\n"); + goto out; + } + c = 0; + } else if (c == 0 && tx == NULL) { + omap2_mcspi_set_enable(spi, 0); + } + + *rx++ = __raw_readl(rx_reg); + dev_vdbg(&spi->dev, "read-%d %02x\n", + word_len, *(rx - 1)); + } + } while (c); + } else if (word_len <= 16) { + u16 *rx; + const u16 *tx; + + rx = xfer->rx_buf; + tx = xfer->tx_buf; + do { + c -= 2; + if (tx != NULL) { + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_TXS) < 0) { + dev_err(&spi->dev, "TXS timed out\n"); + goto out; + } + dev_vdbg(&spi->dev, "write-%d %04x\n", + word_len, *tx); + __raw_writel(*tx++, tx_reg); + } + if (rx != NULL) { + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_RXS) < 0) { + dev_err(&spi->dev, "RXS timed out\n"); + goto out; + } + + if (c == 2 && tx == NULL && + (l & OMAP2_MCSPI_CHCONF_TURBO)) { + omap2_mcspi_set_enable(spi, 0); + *rx++ = __raw_readl(rx_reg); + dev_vdbg(&spi->dev, "read-%d %04x\n", + word_len, *(rx - 1)); + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_RXS) < 0) { + dev_err(&spi->dev, + "RXS timed out\n"); + goto out; + } + c = 0; + } else if (c == 0 && tx == NULL) { + omap2_mcspi_set_enable(spi, 0); + } + + *rx++ = __raw_readl(rx_reg); + dev_vdbg(&spi->dev, "read-%d %04x\n", + word_len, *(rx - 1)); + } + } while (c >= 2); + } else if (word_len <= 32) { + u32 *rx; + const u32 *tx; + + rx = xfer->rx_buf; + tx = xfer->tx_buf; + do { + c -= 4; + if (tx != NULL) { + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_TXS) < 0) { + dev_err(&spi->dev, "TXS timed out\n"); + goto out; + } + dev_vdbg(&spi->dev, "write-%d %08x\n", + word_len, *tx); + __raw_writel(*tx++, tx_reg); + } + if (rx != NULL) { + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_RXS) < 0) { + dev_err(&spi->dev, "RXS timed out\n"); + goto out; + } + + if (c == 4 && tx == NULL && + (l & OMAP2_MCSPI_CHCONF_TURBO)) { + omap2_mcspi_set_enable(spi, 0); + *rx++ = __raw_readl(rx_reg); + dev_vdbg(&spi->dev, "read-%d %08x\n", + word_len, *(rx - 1)); + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_RXS) < 0) { + dev_err(&spi->dev, + "RXS timed out\n"); + goto out; + } + c = 0; + } else if (c == 0 && tx == NULL) { + omap2_mcspi_set_enable(spi, 0); + } + + *rx++ = __raw_readl(rx_reg); + dev_vdbg(&spi->dev, "read-%d %08x\n", + word_len, *(rx - 1)); + } + } while (c >= 4); + } + + /* for TX_ONLY mode, be sure all words have shifted out */ + if (xfer->rx_buf == NULL) { + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_TXS) < 0) { + dev_err(&spi->dev, "TXS timed out\n"); + } else if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_EOT) < 0) + dev_err(&spi->dev, "EOT timed out\n"); + + /* disable chan to purge rx datas received in TX_ONLY transfer, + * otherwise these rx datas will affect the direct following + * RX_ONLY transfer. + */ + omap2_mcspi_set_enable(spi, 0); + } +out: + omap2_mcspi_set_enable(spi, 1); + return count - c; +} + +static u32 omap2_mcspi_calc_divisor(u32 speed_hz) +{ + u32 div; + + for (div = 0; div < 15; div++) + if (speed_hz >= (OMAP2_MCSPI_MAX_FREQ >> div)) + return div; + + return 15; +} + +/* called only when no transfer is active to this device */ +static int omap2_mcspi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct omap2_mcspi_cs *cs = spi->controller_state; + struct omap2_mcspi *mcspi; + struct spi_master *spi_cntrl; + u32 l = 0, div = 0; + u8 word_len = spi->bits_per_word; + u32 speed_hz = spi->max_speed_hz; + + mcspi = spi_master_get_devdata(spi->master); + spi_cntrl = mcspi->master; + + if (t != NULL && t->bits_per_word) + word_len = t->bits_per_word; + + cs->word_len = word_len; + + if (t && t->speed_hz) + speed_hz = t->speed_hz; + + speed_hz = min_t(u32, speed_hz, OMAP2_MCSPI_MAX_FREQ); + div = omap2_mcspi_calc_divisor(speed_hz); + + l = mcspi_cached_chconf0(spi); + + /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS + * REVISIT: this controller could support SPI_3WIRE mode. + */ + l &= ~(OMAP2_MCSPI_CHCONF_IS|OMAP2_MCSPI_CHCONF_DPE1); + l |= OMAP2_MCSPI_CHCONF_DPE0; + + /* wordlength */ + l &= ~OMAP2_MCSPI_CHCONF_WL_MASK; + l |= (word_len - 1) << 7; + + /* set chipselect polarity; manage with FORCE */ + if (!(spi->mode & SPI_CS_HIGH)) + l |= OMAP2_MCSPI_CHCONF_EPOL; /* active-low; normal */ + else + l &= ~OMAP2_MCSPI_CHCONF_EPOL; + + /* set clock divisor */ + l &= ~OMAP2_MCSPI_CHCONF_CLKD_MASK; + l |= div << 2; + + /* set SPI mode 0..3 */ + if (spi->mode & SPI_CPOL) + l |= OMAP2_MCSPI_CHCONF_POL; + else + l &= ~OMAP2_MCSPI_CHCONF_POL; + if (spi->mode & SPI_CPHA) + l |= OMAP2_MCSPI_CHCONF_PHA; + else + l &= ~OMAP2_MCSPI_CHCONF_PHA; + + mcspi_write_chconf0(spi, l); + + dev_dbg(&spi->dev, "setup: speed %d, sample %s edge, clk %s\n", + OMAP2_MCSPI_MAX_FREQ >> div, + (spi->mode & SPI_CPHA) ? "trailing" : "leading", + (spi->mode & SPI_CPOL) ? "inverted" : "normal"); + + return 0; +} + +static void omap2_mcspi_dma_rx_callback(int lch, u16 ch_status, void *data) +{ + struct spi_device *spi = data; + struct omap2_mcspi *mcspi; + struct omap2_mcspi_dma *mcspi_dma; + + mcspi = spi_master_get_devdata(spi->master); + mcspi_dma = &(mcspi->dma_channels[spi->chip_select]); + + complete(&mcspi_dma->dma_rx_completion); + + /* We must disable the DMA RX request */ + omap2_mcspi_set_dma_req(spi, 1, 0); +} + +static void omap2_mcspi_dma_tx_callback(int lch, u16 ch_status, void *data) +{ + struct spi_device *spi = data; + struct omap2_mcspi *mcspi; + struct omap2_mcspi_dma *mcspi_dma; + + mcspi = spi_master_get_devdata(spi->master); + mcspi_dma = &(mcspi->dma_channels[spi->chip_select]); + + complete(&mcspi_dma->dma_tx_completion); + + /* We must disable the DMA TX request */ + omap2_mcspi_set_dma_req(spi, 0, 0); +} + +static int omap2_mcspi_request_dma(struct spi_device *spi) +{ + struct spi_master *master = spi->master; + struct omap2_mcspi *mcspi; + struct omap2_mcspi_dma *mcspi_dma; + + mcspi = spi_master_get_devdata(master); + mcspi_dma = mcspi->dma_channels + spi->chip_select; + + if (omap_request_dma(mcspi_dma->dma_rx_sync_dev, "McSPI RX", + omap2_mcspi_dma_rx_callback, spi, + &mcspi_dma->dma_rx_channel)) { + dev_err(&spi->dev, "no RX DMA channel for McSPI\n"); + return -EAGAIN; + } + + if (omap_request_dma(mcspi_dma->dma_tx_sync_dev, "McSPI TX", + omap2_mcspi_dma_tx_callback, spi, + &mcspi_dma->dma_tx_channel)) { + omap_free_dma(mcspi_dma->dma_rx_channel); + mcspi_dma->dma_rx_channel = -1; + dev_err(&spi->dev, "no TX DMA channel for McSPI\n"); + return -EAGAIN; + } + + init_completion(&mcspi_dma->dma_rx_completion); + init_completion(&mcspi_dma->dma_tx_completion); + + return 0; +} + +static int omap2_mcspi_setup(struct spi_device *spi) +{ + int ret; + struct omap2_mcspi *mcspi; + struct omap2_mcspi_dma *mcspi_dma; + struct omap2_mcspi_cs *cs = spi->controller_state; + + if (spi->bits_per_word < 4 || spi->bits_per_word > 32) { + dev_dbg(&spi->dev, "setup: unsupported %d bit words\n", + spi->bits_per_word); + return -EINVAL; + } + + mcspi = spi_master_get_devdata(spi->master); + mcspi_dma = &mcspi->dma_channels[spi->chip_select]; + + if (!cs) { + cs = kzalloc(sizeof *cs, GFP_KERNEL); + if (!cs) + return -ENOMEM; + cs->base = mcspi->base + spi->chip_select * 0x14; + cs->phys = mcspi->phys + spi->chip_select * 0x14; + cs->chconf0 = 0; + spi->controller_state = cs; + /* Link this to context save list */ + list_add_tail(&cs->node, + &omap2_mcspi_ctx[mcspi->master->bus_num - 1].cs); + } + + if (mcspi_dma->dma_rx_channel == -1 + || mcspi_dma->dma_tx_channel == -1) { + ret = omap2_mcspi_request_dma(spi); + if (ret < 0) + return ret; + } + + ret = omap2_mcspi_enable_clocks(mcspi); + if (ret < 0) + return ret; + + ret = omap2_mcspi_setup_transfer(spi, NULL); + omap2_mcspi_disable_clocks(mcspi); + + return ret; +} + +static void omap2_mcspi_cleanup(struct spi_device *spi) +{ + struct omap2_mcspi *mcspi; + struct omap2_mcspi_dma *mcspi_dma; + struct omap2_mcspi_cs *cs; + + mcspi = spi_master_get_devdata(spi->master); + + if (spi->controller_state) { + /* Unlink controller state from context save list */ + cs = spi->controller_state; + list_del(&cs->node); + + kfree(spi->controller_state); + } + + if (spi->chip_select < spi->master->num_chipselect) { + mcspi_dma = &mcspi->dma_channels[spi->chip_select]; + + if (mcspi_dma->dma_rx_channel != -1) { + omap_free_dma(mcspi_dma->dma_rx_channel); + mcspi_dma->dma_rx_channel = -1; + } + if (mcspi_dma->dma_tx_channel != -1) { + omap_free_dma(mcspi_dma->dma_tx_channel); + mcspi_dma->dma_tx_channel = -1; + } + } +} + +static void omap2_mcspi_work(struct work_struct *work) +{ + struct omap2_mcspi *mcspi; + + mcspi = container_of(work, struct omap2_mcspi, work); + + if (omap2_mcspi_enable_clocks(mcspi) < 0) + return; + + spin_lock_irq(&mcspi->lock); + + /* We only enable one channel at a time -- the one whose message is + * at the head of the queue -- although this controller would gladly + * arbitrate among multiple channels. This corresponds to "single + * channel" master mode. As a side effect, we need to manage the + * chipselect with the FORCE bit ... CS != channel enable. + */ + while (!list_empty(&mcspi->msg_queue)) { + struct spi_message *m; + struct spi_device *spi; + struct spi_transfer *t = NULL; + int cs_active = 0; + struct omap2_mcspi_cs *cs; + struct omap2_mcspi_device_config *cd; + int par_override = 0; + int status = 0; + u32 chconf; + + m = container_of(mcspi->msg_queue.next, struct spi_message, + queue); + + list_del_init(&m->queue); + spin_unlock_irq(&mcspi->lock); + + spi = m->spi; + cs = spi->controller_state; + cd = spi->controller_data; + + omap2_mcspi_set_enable(spi, 1); + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { + status = -EINVAL; + break; + } + if (par_override || t->speed_hz || t->bits_per_word) { + par_override = 1; + status = omap2_mcspi_setup_transfer(spi, t); + if (status < 0) + break; + if (!t->speed_hz && !t->bits_per_word) + par_override = 0; + } + + if (!cs_active) { + omap2_mcspi_force_cs(spi, 1); + cs_active = 1; + } + + chconf = mcspi_cached_chconf0(spi); + chconf &= ~OMAP2_MCSPI_CHCONF_TRM_MASK; + chconf &= ~OMAP2_MCSPI_CHCONF_TURBO; + + if (t->tx_buf == NULL) + chconf |= OMAP2_MCSPI_CHCONF_TRM_RX_ONLY; + else if (t->rx_buf == NULL) + chconf |= OMAP2_MCSPI_CHCONF_TRM_TX_ONLY; + + if (cd && cd->turbo_mode && t->tx_buf == NULL) { + /* Turbo mode is for more than one word */ + if (t->len > ((cs->word_len + 7) >> 3)) + chconf |= OMAP2_MCSPI_CHCONF_TURBO; + } + + mcspi_write_chconf0(spi, chconf); + + if (t->len) { + unsigned count; + + /* RX_ONLY mode needs dummy data in TX reg */ + if (t->tx_buf == NULL) + __raw_writel(0, cs->base + + OMAP2_MCSPI_TX0); + + if (m->is_dma_mapped || t->len >= DMA_MIN_BYTES) + count = omap2_mcspi_txrx_dma(spi, t); + else + count = omap2_mcspi_txrx_pio(spi, t); + m->actual_length += count; + + if (count != t->len) { + status = -EIO; + break; + } + } + + if (t->delay_usecs) + udelay(t->delay_usecs); + + /* ignore the "leave it on after last xfer" hint */ + if (t->cs_change) { + omap2_mcspi_force_cs(spi, 0); + cs_active = 0; + } + } + + /* Restore defaults if they were overriden */ + if (par_override) { + par_override = 0; + status = omap2_mcspi_setup_transfer(spi, NULL); + } + + if (cs_active) + omap2_mcspi_force_cs(spi, 0); + + omap2_mcspi_set_enable(spi, 0); + + m->status = status; + m->complete(m->context); + + spin_lock_irq(&mcspi->lock); + } + + spin_unlock_irq(&mcspi->lock); + + omap2_mcspi_disable_clocks(mcspi); +} + +static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct omap2_mcspi *mcspi; + unsigned long flags; + struct spi_transfer *t; + + m->actual_length = 0; + m->status = 0; + + /* reject invalid messages and transfers */ + if (list_empty(&m->transfers) || !m->complete) + return -EINVAL; + list_for_each_entry(t, &m->transfers, transfer_list) { + const void *tx_buf = t->tx_buf; + void *rx_buf = t->rx_buf; + unsigned len = t->len; + + if (t->speed_hz > OMAP2_MCSPI_MAX_FREQ + || (len && !(rx_buf || tx_buf)) + || (t->bits_per_word && + ( t->bits_per_word < 4 + || t->bits_per_word > 32))) { + dev_dbg(&spi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n", + t->speed_hz, + len, + tx_buf ? "tx" : "", + rx_buf ? "rx" : "", + t->bits_per_word); + return -EINVAL; + } + if (t->speed_hz && t->speed_hz < (OMAP2_MCSPI_MAX_FREQ >> 15)) { + dev_dbg(&spi->dev, "speed_hz %d below minimum %d Hz\n", + t->speed_hz, + OMAP2_MCSPI_MAX_FREQ >> 15); + return -EINVAL; + } + + if (m->is_dma_mapped || len < DMA_MIN_BYTES) + continue; + + if (tx_buf != NULL) { + t->tx_dma = dma_map_single(&spi->dev, (void *) tx_buf, + len, DMA_TO_DEVICE); + if (dma_mapping_error(&spi->dev, t->tx_dma)) { + dev_dbg(&spi->dev, "dma %cX %d bytes error\n", + 'T', len); + return -EINVAL; + } + } + if (rx_buf != NULL) { + t->rx_dma = dma_map_single(&spi->dev, rx_buf, t->len, + DMA_FROM_DEVICE); + if (dma_mapping_error(&spi->dev, t->rx_dma)) { + dev_dbg(&spi->dev, "dma %cX %d bytes error\n", + 'R', len); + if (tx_buf != NULL) + dma_unmap_single(&spi->dev, t->tx_dma, + len, DMA_TO_DEVICE); + return -EINVAL; + } + } + } + + mcspi = spi_master_get_devdata(spi->master); + + spin_lock_irqsave(&mcspi->lock, flags); + list_add_tail(&m->queue, &mcspi->msg_queue); + queue_work(omap2_mcspi_wq, &mcspi->work); + spin_unlock_irqrestore(&mcspi->lock, flags); + + return 0; +} + +static int __init omap2_mcspi_master_setup(struct omap2_mcspi *mcspi) +{ + struct spi_master *master = mcspi->master; + u32 tmp; + int ret = 0; + + ret = omap2_mcspi_enable_clocks(mcspi); + if (ret < 0) + return ret; + + tmp = OMAP2_MCSPI_WAKEUPENABLE_WKEN; + mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE, tmp); + omap2_mcspi_ctx[master->bus_num - 1].wakeupenable = tmp; + + omap2_mcspi_set_master_mode(master); + omap2_mcspi_disable_clocks(mcspi); + return 0; +} + +static int omap_mcspi_runtime_resume(struct device *dev) +{ + struct omap2_mcspi *mcspi; + struct spi_master *master; + + master = dev_get_drvdata(dev); + mcspi = spi_master_get_devdata(master); + omap2_mcspi_restore_ctx(mcspi); + + return 0; +} + + +static int __init omap2_mcspi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct omap2_mcspi_platform_config *pdata = pdev->dev.platform_data; + struct omap2_mcspi *mcspi; + struct resource *r; + int status = 0, i; + + master = spi_alloc_master(&pdev->dev, sizeof *mcspi); + if (master == NULL) { + dev_dbg(&pdev->dev, "master allocation failed\n"); + return -ENOMEM; + } + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + if (pdev->id != -1) + master->bus_num = pdev->id; + + master->setup = omap2_mcspi_setup; + master->transfer = omap2_mcspi_transfer; + master->cleanup = omap2_mcspi_cleanup; + master->num_chipselect = pdata->num_cs; + + dev_set_drvdata(&pdev->dev, master); + + mcspi = spi_master_get_devdata(master); + mcspi->master = master; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + status = -ENODEV; + goto err1; + } + if (!request_mem_region(r->start, (r->end - r->start) + 1, + dev_name(&pdev->dev))) { + status = -EBUSY; + goto err1; + } + + r->start += pdata->regs_offset; + r->end += pdata->regs_offset; + mcspi->phys = r->start; + mcspi->base = ioremap(r->start, r->end - r->start + 1); + if (!mcspi->base) { + dev_dbg(&pdev->dev, "can't ioremap MCSPI\n"); + status = -ENOMEM; + goto err2; + } + + mcspi->dev = &pdev->dev; + INIT_WORK(&mcspi->work, omap2_mcspi_work); + + spin_lock_init(&mcspi->lock); + INIT_LIST_HEAD(&mcspi->msg_queue); + INIT_LIST_HEAD(&omap2_mcspi_ctx[master->bus_num - 1].cs); + + mcspi->dma_channels = kcalloc(master->num_chipselect, + sizeof(struct omap2_mcspi_dma), + GFP_KERNEL); + + if (mcspi->dma_channels == NULL) + goto err2; + + for (i = 0; i < master->num_chipselect; i++) { + char dma_ch_name[14]; + struct resource *dma_res; + + sprintf(dma_ch_name, "rx%d", i); + dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA, + dma_ch_name); + if (!dma_res) { + dev_dbg(&pdev->dev, "cannot get DMA RX channel\n"); + status = -ENODEV; + break; + } + + mcspi->dma_channels[i].dma_rx_channel = -1; + mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start; + sprintf(dma_ch_name, "tx%d", i); + dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA, + dma_ch_name); + if (!dma_res) { + dev_dbg(&pdev->dev, "cannot get DMA TX channel\n"); + status = -ENODEV; + break; + } + + mcspi->dma_channels[i].dma_tx_channel = -1; + mcspi->dma_channels[i].dma_tx_sync_dev = dma_res->start; + } + + pm_runtime_enable(&pdev->dev); + + if (status || omap2_mcspi_master_setup(mcspi) < 0) + goto err3; + + status = spi_register_master(master); + if (status < 0) + goto err4; + + return status; + +err4: + spi_master_put(master); +err3: + kfree(mcspi->dma_channels); +err2: + release_mem_region(r->start, (r->end - r->start) + 1); + iounmap(mcspi->base); +err1: + return status; +} + +static int __exit omap2_mcspi_remove(struct platform_device *pdev) +{ + struct spi_master *master; + struct omap2_mcspi *mcspi; + struct omap2_mcspi_dma *dma_channels; + struct resource *r; + void __iomem *base; + + master = dev_get_drvdata(&pdev->dev); + mcspi = spi_master_get_devdata(master); + dma_channels = mcspi->dma_channels; + + omap2_mcspi_disable_clocks(mcspi); + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(r->start, (r->end - r->start) + 1); + + base = mcspi->base; + spi_unregister_master(master); + iounmap(base); + kfree(dma_channels); + + return 0; +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:omap2_mcspi"); + +#ifdef CONFIG_SUSPEND +/* + * When SPI wake up from off-mode, CS is in activate state. If it was in + * unactive state when driver was suspend, then force it to unactive state at + * wake up. + */ +static int omap2_mcspi_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct omap2_mcspi *mcspi = spi_master_get_devdata(master); + struct omap2_mcspi_cs *cs; + + omap2_mcspi_enable_clocks(mcspi); + list_for_each_entry(cs, &omap2_mcspi_ctx[master->bus_num - 1].cs, + node) { + if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) { + + /* + * We need to toggle CS state for OMAP take this + * change in account. + */ + MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 1); + __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); + MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 0); + __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); + } + } + omap2_mcspi_disable_clocks(mcspi); + return 0; +} +#else +#define omap2_mcspi_resume NULL +#endif + +static const struct dev_pm_ops omap2_mcspi_pm_ops = { + .resume = omap2_mcspi_resume, + .runtime_resume = omap_mcspi_runtime_resume, +}; + +static struct platform_driver omap2_mcspi_driver = { + .driver = { + .name = "omap2_mcspi", + .owner = THIS_MODULE, + .pm = &omap2_mcspi_pm_ops + }, + .remove = __exit_p(omap2_mcspi_remove), +}; + + +static int __init omap2_mcspi_init(void) +{ + omap2_mcspi_wq = create_singlethread_workqueue( + omap2_mcspi_driver.driver.name); + if (omap2_mcspi_wq == NULL) + return -1; + return platform_driver_probe(&omap2_mcspi_driver, omap2_mcspi_probe); +} +subsys_initcall(omap2_mcspi_init); + +static void __exit omap2_mcspi_exit(void) +{ + platform_driver_unregister(&omap2_mcspi_driver); + + destroy_workqueue(omap2_mcspi_wq); +} +module_exit(omap2_mcspi_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c new file mode 100644 index 000000000000..d48262829fdc --- /dev/null +++ b/drivers/spi/spi-orion.c @@ -0,0 +1,573 @@ +/* + * Marvell Orion SPI controller driver + * + * Author: Shadi Ammouri + * Copyright (C) 2007-2008 Marvell Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "orion_spi" + +#define ORION_NUM_CHIPSELECTS 1 /* only one slave is supported*/ +#define ORION_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */ + +#define ORION_SPI_IF_CTRL_REG 0x00 +#define ORION_SPI_IF_CONFIG_REG 0x04 +#define ORION_SPI_DATA_OUT_REG 0x08 +#define ORION_SPI_DATA_IN_REG 0x0c +#define ORION_SPI_INT_CAUSE_REG 0x10 + +#define ORION_SPI_IF_8_16_BIT_MODE (1 << 5) +#define ORION_SPI_CLK_PRESCALE_MASK 0x1F + +struct orion_spi { + struct work_struct work; + + /* Lock access to transfer list. */ + spinlock_t lock; + + struct list_head msg_queue; + struct spi_master *master; + void __iomem *base; + unsigned int max_speed; + unsigned int min_speed; + struct orion_spi_info *spi_info; +}; + +static struct workqueue_struct *orion_spi_wq; + +static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg) +{ + return orion_spi->base + reg; +} + +static inline void +orion_spi_setbits(struct orion_spi *orion_spi, u32 reg, u32 mask) +{ + void __iomem *reg_addr = spi_reg(orion_spi, reg); + u32 val; + + val = readl(reg_addr); + val |= mask; + writel(val, reg_addr); +} + +static inline void +orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask) +{ + void __iomem *reg_addr = spi_reg(orion_spi, reg); + u32 val; + + val = readl(reg_addr); + val &= ~mask; + writel(val, reg_addr); +} + +static int orion_spi_set_transfer_size(struct orion_spi *orion_spi, int size) +{ + if (size == 16) { + orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, + ORION_SPI_IF_8_16_BIT_MODE); + } else if (size == 8) { + orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG, + ORION_SPI_IF_8_16_BIT_MODE); + } else { + pr_debug("Bad bits per word value %d (only 8 or 16 are " + "allowed).\n", size); + return -EINVAL; + } + + return 0; +} + +static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed) +{ + u32 tclk_hz; + u32 rate; + u32 prescale; + u32 reg; + struct orion_spi *orion_spi; + + orion_spi = spi_master_get_devdata(spi->master); + + tclk_hz = orion_spi->spi_info->tclk; + + /* + * the supported rates are: 4,6,8...30 + * round up as we look for equal or less speed + */ + rate = DIV_ROUND_UP(tclk_hz, speed); + rate = roundup(rate, 2); + + /* check if requested speed is too small */ + if (rate > 30) + return -EINVAL; + + if (rate < 4) + rate = 4; + + /* Convert the rate to SPI clock divisor value. */ + prescale = 0x10 + rate/2; + + reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); + reg = ((reg & ~ORION_SPI_CLK_PRESCALE_MASK) | prescale); + writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); + + return 0; +} + +/* + * called only when no transfer is active on the bus + */ +static int +orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct orion_spi *orion_spi; + unsigned int speed = spi->max_speed_hz; + unsigned int bits_per_word = spi->bits_per_word; + int rc; + + orion_spi = spi_master_get_devdata(spi->master); + + if ((t != NULL) && t->speed_hz) + speed = t->speed_hz; + + if ((t != NULL) && t->bits_per_word) + bits_per_word = t->bits_per_word; + + rc = orion_spi_baudrate_set(spi, speed); + if (rc) + return rc; + + return orion_spi_set_transfer_size(orion_spi, bits_per_word); +} + +static void orion_spi_set_cs(struct orion_spi *orion_spi, int enable) +{ + if (enable) + orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); + else + orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); +} + +static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi) +{ + int i; + + for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) { + if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG))) + return 1; + else + udelay(1); + } + + return -1; +} + +static inline int +orion_spi_write_read_8bit(struct spi_device *spi, + const u8 **tx_buf, u8 **rx_buf) +{ + void __iomem *tx_reg, *rx_reg, *int_reg; + struct orion_spi *orion_spi; + + orion_spi = spi_master_get_devdata(spi->master); + tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); + rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); + int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); + + /* clear the interrupt cause register */ + writel(0x0, int_reg); + + if (tx_buf && *tx_buf) + writel(*(*tx_buf)++, tx_reg); + else + writel(0, tx_reg); + + if (orion_spi_wait_till_ready(orion_spi) < 0) { + dev_err(&spi->dev, "TXS timed out\n"); + return -1; + } + + if (rx_buf && *rx_buf) + *(*rx_buf)++ = readl(rx_reg); + + return 1; +} + +static inline int +orion_spi_write_read_16bit(struct spi_device *spi, + const u16 **tx_buf, u16 **rx_buf) +{ + void __iomem *tx_reg, *rx_reg, *int_reg; + struct orion_spi *orion_spi; + + orion_spi = spi_master_get_devdata(spi->master); + tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); + rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); + int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); + + /* clear the interrupt cause register */ + writel(0x0, int_reg); + + if (tx_buf && *tx_buf) + writel(__cpu_to_le16(get_unaligned((*tx_buf)++)), tx_reg); + else + writel(0, tx_reg); + + if (orion_spi_wait_till_ready(orion_spi) < 0) { + dev_err(&spi->dev, "TXS timed out\n"); + return -1; + } + + if (rx_buf && *rx_buf) + put_unaligned(__le16_to_cpu(readl(rx_reg)), (*rx_buf)++); + + return 1; +} + +static unsigned int +orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) +{ + struct orion_spi *orion_spi; + unsigned int count; + int word_len; + + orion_spi = spi_master_get_devdata(spi->master); + word_len = spi->bits_per_word; + count = xfer->len; + + if (word_len == 8) { + const u8 *tx = xfer->tx_buf; + u8 *rx = xfer->rx_buf; + + do { + if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0) + goto out; + count--; + } while (count); + } else if (word_len == 16) { + const u16 *tx = xfer->tx_buf; + u16 *rx = xfer->rx_buf; + + do { + if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0) + goto out; + count -= 2; + } while (count); + } + +out: + return xfer->len - count; +} + + +static void orion_spi_work(struct work_struct *work) +{ + struct orion_spi *orion_spi = + container_of(work, struct orion_spi, work); + + spin_lock_irq(&orion_spi->lock); + while (!list_empty(&orion_spi->msg_queue)) { + struct spi_message *m; + struct spi_device *spi; + struct spi_transfer *t = NULL; + int par_override = 0; + int status = 0; + int cs_active = 0; + + m = container_of(orion_spi->msg_queue.next, struct spi_message, + queue); + + list_del_init(&m->queue); + spin_unlock_irq(&orion_spi->lock); + + spi = m->spi; + + /* Load defaults */ + status = orion_spi_setup_transfer(spi, NULL); + + if (status < 0) + goto msg_done; + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (par_override || t->speed_hz || t->bits_per_word) { + par_override = 1; + status = orion_spi_setup_transfer(spi, t); + if (status < 0) + break; + if (!t->speed_hz && !t->bits_per_word) + par_override = 0; + } + + if (!cs_active) { + orion_spi_set_cs(orion_spi, 1); + cs_active = 1; + } + + if (t->len) + m->actual_length += + orion_spi_write_read(spi, t); + + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (t->cs_change) { + orion_spi_set_cs(orion_spi, 0); + cs_active = 0; + } + } + +msg_done: + if (cs_active) + orion_spi_set_cs(orion_spi, 0); + + m->status = status; + m->complete(m->context); + + spin_lock_irq(&orion_spi->lock); + } + + spin_unlock_irq(&orion_spi->lock); +} + +static int __init orion_spi_reset(struct orion_spi *orion_spi) +{ + /* Verify that the CS is deasserted */ + orion_spi_set_cs(orion_spi, 0); + + return 0; +} + +static int orion_spi_setup(struct spi_device *spi) +{ + struct orion_spi *orion_spi; + + orion_spi = spi_master_get_devdata(spi->master); + + /* Fix ac timing if required. */ + if (orion_spi->spi_info->enable_clock_fix) + orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, + (1 << 14)); + + if ((spi->max_speed_hz == 0) + || (spi->max_speed_hz > orion_spi->max_speed)) + spi->max_speed_hz = orion_spi->max_speed; + + if (spi->max_speed_hz < orion_spi->min_speed) { + dev_err(&spi->dev, "setup: requested speed too low %d Hz\n", + spi->max_speed_hz); + return -EINVAL; + } + + /* + * baudrate & width will be set orion_spi_setup_transfer + */ + return 0; +} + +static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct orion_spi *orion_spi; + struct spi_transfer *t = NULL; + unsigned long flags; + + m->actual_length = 0; + m->status = 0; + + /* reject invalid messages and transfers */ + if (list_empty(&m->transfers) || !m->complete) + return -EINVAL; + + orion_spi = spi_master_get_devdata(spi->master); + + list_for_each_entry(t, &m->transfers, transfer_list) { + unsigned int bits_per_word = spi->bits_per_word; + + if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { + dev_err(&spi->dev, + "message rejected : " + "invalid transfer data buffers\n"); + goto msg_rejected; + } + + if (t->bits_per_word) + bits_per_word = t->bits_per_word; + + if ((bits_per_word != 8) && (bits_per_word != 16)) { + dev_err(&spi->dev, + "message rejected : " + "invalid transfer bits_per_word (%d bits)\n", + bits_per_word); + goto msg_rejected; + } + /*make sure buffer length is even when working in 16 bit mode*/ + if ((t->bits_per_word == 16) && (t->len & 1)) { + dev_err(&spi->dev, + "message rejected : " + "odd data length (%d) while in 16 bit mode\n", + t->len); + goto msg_rejected; + } + + if (t->speed_hz && t->speed_hz < orion_spi->min_speed) { + dev_err(&spi->dev, + "message rejected : " + "device min speed (%d Hz) exceeds " + "required transfer speed (%d Hz)\n", + orion_spi->min_speed, t->speed_hz); + goto msg_rejected; + } + } + + + spin_lock_irqsave(&orion_spi->lock, flags); + list_add_tail(&m->queue, &orion_spi->msg_queue); + queue_work(orion_spi_wq, &orion_spi->work); + spin_unlock_irqrestore(&orion_spi->lock, flags); + + return 0; +msg_rejected: + /* Message rejected and not queued */ + m->status = -EINVAL; + if (m->complete) + m->complete(m->context); + return -EINVAL; +} + +static int __init orion_spi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct orion_spi *spi; + struct resource *r; + struct orion_spi_info *spi_info; + int status = 0; + + spi_info = pdev->dev.platform_data; + + master = spi_alloc_master(&pdev->dev, sizeof *spi); + if (master == NULL) { + dev_dbg(&pdev->dev, "master allocation failed\n"); + return -ENOMEM; + } + + if (pdev->id != -1) + master->bus_num = pdev->id; + + /* we support only mode 0, and no options */ + master->mode_bits = 0; + + master->setup = orion_spi_setup; + master->transfer = orion_spi_transfer; + master->num_chipselect = ORION_NUM_CHIPSELECTS; + + dev_set_drvdata(&pdev->dev, master); + + spi = spi_master_get_devdata(master); + spi->master = master; + spi->spi_info = spi_info; + + spi->max_speed = DIV_ROUND_UP(spi_info->tclk, 4); + spi->min_speed = DIV_ROUND_UP(spi_info->tclk, 30); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + status = -ENODEV; + goto out; + } + + if (!request_mem_region(r->start, (r->end - r->start) + 1, + dev_name(&pdev->dev))) { + status = -EBUSY; + goto out; + } + spi->base = ioremap(r->start, SZ_1K); + + INIT_WORK(&spi->work, orion_spi_work); + + spin_lock_init(&spi->lock); + INIT_LIST_HEAD(&spi->msg_queue); + + if (orion_spi_reset(spi) < 0) + goto out_rel_mem; + + status = spi_register_master(master); + if (status < 0) + goto out_rel_mem; + + return status; + +out_rel_mem: + release_mem_region(r->start, (r->end - r->start) + 1); + +out: + spi_master_put(master); + return status; +} + + +static int __exit orion_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master; + struct orion_spi *spi; + struct resource *r; + + master = dev_get_drvdata(&pdev->dev); + spi = spi_master_get_devdata(master); + + cancel_work_sync(&spi->work); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(r->start, (r->end - r->start) + 1); + + spi_unregister_master(master); + + return 0; +} + +MODULE_ALIAS("platform:" DRIVER_NAME); + +static struct platform_driver orion_spi_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .remove = __exit_p(orion_spi_remove), +}; + +static int __init orion_spi_init(void) +{ + orion_spi_wq = create_singlethread_workqueue( + orion_spi_driver.driver.name); + if (orion_spi_wq == NULL) + return -ENOMEM; + + return platform_driver_probe(&orion_spi_driver, orion_spi_probe); +} +module_init(orion_spi_init); + +static void __exit orion_spi_exit(void) +{ + flush_workqueue(orion_spi_wq); + platform_driver_unregister(&orion_spi_driver); + + destroy_workqueue(orion_spi_wq); +} +module_exit(orion_spi_exit); + +MODULE_DESCRIPTION("Orion SPI driver"); +MODULE_AUTHOR("Shadi Ammouri "); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c new file mode 100644 index 000000000000..25417054a456 --- /dev/null +++ b/drivers/spi/spi-pl022.c @@ -0,0 +1,2342 @@ +/* + * A driver for the ARM PL022 PrimeCell SSP/SPI bus master. + * + * Copyright (C) 2008-2009 ST-Ericsson AB + * Copyright (C) 2006 STMicroelectronics Pvt. Ltd. + * + * Author: Linus Walleij + * + * Initial version inspired by: + * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c + * Initial adoption to PL022 by: + * Sachin Verma + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * This macro is used to define some register default values. + * reg is masked with mask, the OR:ed with an (again masked) + * val shifted sb steps to the left. + */ +#define SSP_WRITE_BITS(reg, val, mask, sb) \ + ((reg) = (((reg) & ~(mask)) | (((val)<<(sb)) & (mask)))) + +/* + * This macro is also used to define some default values. + * It will just shift val by sb steps to the left and mask + * the result with mask. + */ +#define GEN_MASK_BITS(val, mask, sb) \ + (((val)<<(sb)) & (mask)) + +#define DRIVE_TX 0 +#define DO_NOT_DRIVE_TX 1 + +#define DO_NOT_QUEUE_DMA 0 +#define QUEUE_DMA 1 + +#define RX_TRANSFER 1 +#define TX_TRANSFER 2 + +/* + * Macros to access SSP Registers with their offsets + */ +#define SSP_CR0(r) (r + 0x000) +#define SSP_CR1(r) (r + 0x004) +#define SSP_DR(r) (r + 0x008) +#define SSP_SR(r) (r + 0x00C) +#define SSP_CPSR(r) (r + 0x010) +#define SSP_IMSC(r) (r + 0x014) +#define SSP_RIS(r) (r + 0x018) +#define SSP_MIS(r) (r + 0x01C) +#define SSP_ICR(r) (r + 0x020) +#define SSP_DMACR(r) (r + 0x024) +#define SSP_ITCR(r) (r + 0x080) +#define SSP_ITIP(r) (r + 0x084) +#define SSP_ITOP(r) (r + 0x088) +#define SSP_TDR(r) (r + 0x08C) + +#define SSP_PID0(r) (r + 0xFE0) +#define SSP_PID1(r) (r + 0xFE4) +#define SSP_PID2(r) (r + 0xFE8) +#define SSP_PID3(r) (r + 0xFEC) + +#define SSP_CID0(r) (r + 0xFF0) +#define SSP_CID1(r) (r + 0xFF4) +#define SSP_CID2(r) (r + 0xFF8) +#define SSP_CID3(r) (r + 0xFFC) + +/* + * SSP Control Register 0 - SSP_CR0 + */ +#define SSP_CR0_MASK_DSS (0x0FUL << 0) +#define SSP_CR0_MASK_FRF (0x3UL << 4) +#define SSP_CR0_MASK_SPO (0x1UL << 6) +#define SSP_CR0_MASK_SPH (0x1UL << 7) +#define SSP_CR0_MASK_SCR (0xFFUL << 8) + +/* + * The ST version of this block moves som bits + * in SSP_CR0 and extends it to 32 bits + */ +#define SSP_CR0_MASK_DSS_ST (0x1FUL << 0) +#define SSP_CR0_MASK_HALFDUP_ST (0x1UL << 5) +#define SSP_CR0_MASK_CSS_ST (0x1FUL << 16) +#define SSP_CR0_MASK_FRF_ST (0x3UL << 21) + + +/* + * SSP Control Register 0 - SSP_CR1 + */ +#define SSP_CR1_MASK_LBM (0x1UL << 0) +#define SSP_CR1_MASK_SSE (0x1UL << 1) +#define SSP_CR1_MASK_MS (0x1UL << 2) +#define SSP_CR1_MASK_SOD (0x1UL << 3) + +/* + * The ST version of this block adds some bits + * in SSP_CR1 + */ +#define SSP_CR1_MASK_RENDN_ST (0x1UL << 4) +#define SSP_CR1_MASK_TENDN_ST (0x1UL << 5) +#define SSP_CR1_MASK_MWAIT_ST (0x1UL << 6) +#define SSP_CR1_MASK_RXIFLSEL_ST (0x7UL << 7) +#define SSP_CR1_MASK_TXIFLSEL_ST (0x7UL << 10) +/* This one is only in the PL023 variant */ +#define SSP_CR1_MASK_FBCLKDEL_ST (0x7UL << 13) + +/* + * SSP Status Register - SSP_SR + */ +#define SSP_SR_MASK_TFE (0x1UL << 0) /* Transmit FIFO empty */ +#define SSP_SR_MASK_TNF (0x1UL << 1) /* Transmit FIFO not full */ +#define SSP_SR_MASK_RNE (0x1UL << 2) /* Receive FIFO not empty */ +#define SSP_SR_MASK_RFF (0x1UL << 3) /* Receive FIFO full */ +#define SSP_SR_MASK_BSY (0x1UL << 4) /* Busy Flag */ + +/* + * SSP Clock Prescale Register - SSP_CPSR + */ +#define SSP_CPSR_MASK_CPSDVSR (0xFFUL << 0) + +/* + * SSP Interrupt Mask Set/Clear Register - SSP_IMSC + */ +#define SSP_IMSC_MASK_RORIM (0x1UL << 0) /* Receive Overrun Interrupt mask */ +#define SSP_IMSC_MASK_RTIM (0x1UL << 1) /* Receive timeout Interrupt mask */ +#define SSP_IMSC_MASK_RXIM (0x1UL << 2) /* Receive FIFO Interrupt mask */ +#define SSP_IMSC_MASK_TXIM (0x1UL << 3) /* Transmit FIFO Interrupt mask */ + +/* + * SSP Raw Interrupt Status Register - SSP_RIS + */ +/* Receive Overrun Raw Interrupt status */ +#define SSP_RIS_MASK_RORRIS (0x1UL << 0) +/* Receive Timeout Raw Interrupt status */ +#define SSP_RIS_MASK_RTRIS (0x1UL << 1) +/* Receive FIFO Raw Interrupt status */ +#define SSP_RIS_MASK_RXRIS (0x1UL << 2) +/* Transmit FIFO Raw Interrupt status */ +#define SSP_RIS_MASK_TXRIS (0x1UL << 3) + +/* + * SSP Masked Interrupt Status Register - SSP_MIS + */ +/* Receive Overrun Masked Interrupt status */ +#define SSP_MIS_MASK_RORMIS (0x1UL << 0) +/* Receive Timeout Masked Interrupt status */ +#define SSP_MIS_MASK_RTMIS (0x1UL << 1) +/* Receive FIFO Masked Interrupt status */ +#define SSP_MIS_MASK_RXMIS (0x1UL << 2) +/* Transmit FIFO Masked Interrupt status */ +#define SSP_MIS_MASK_TXMIS (0x1UL << 3) + +/* + * SSP Interrupt Clear Register - SSP_ICR + */ +/* Receive Overrun Raw Clear Interrupt bit */ +#define SSP_ICR_MASK_RORIC (0x1UL << 0) +/* Receive Timeout Clear Interrupt bit */ +#define SSP_ICR_MASK_RTIC (0x1UL << 1) + +/* + * SSP DMA Control Register - SSP_DMACR + */ +/* Receive DMA Enable bit */ +#define SSP_DMACR_MASK_RXDMAE (0x1UL << 0) +/* Transmit DMA Enable bit */ +#define SSP_DMACR_MASK_TXDMAE (0x1UL << 1) + +/* + * SSP Integration Test control Register - SSP_ITCR + */ +#define SSP_ITCR_MASK_ITEN (0x1UL << 0) +#define SSP_ITCR_MASK_TESTFIFO (0x1UL << 1) + +/* + * SSP Integration Test Input Register - SSP_ITIP + */ +#define ITIP_MASK_SSPRXD (0x1UL << 0) +#define ITIP_MASK_SSPFSSIN (0x1UL << 1) +#define ITIP_MASK_SSPCLKIN (0x1UL << 2) +#define ITIP_MASK_RXDMAC (0x1UL << 3) +#define ITIP_MASK_TXDMAC (0x1UL << 4) +#define ITIP_MASK_SSPTXDIN (0x1UL << 5) + +/* + * SSP Integration Test output Register - SSP_ITOP + */ +#define ITOP_MASK_SSPTXD (0x1UL << 0) +#define ITOP_MASK_SSPFSSOUT (0x1UL << 1) +#define ITOP_MASK_SSPCLKOUT (0x1UL << 2) +#define ITOP_MASK_SSPOEn (0x1UL << 3) +#define ITOP_MASK_SSPCTLOEn (0x1UL << 4) +#define ITOP_MASK_RORINTR (0x1UL << 5) +#define ITOP_MASK_RTINTR (0x1UL << 6) +#define ITOP_MASK_RXINTR (0x1UL << 7) +#define ITOP_MASK_TXINTR (0x1UL << 8) +#define ITOP_MASK_INTR (0x1UL << 9) +#define ITOP_MASK_RXDMABREQ (0x1UL << 10) +#define ITOP_MASK_RXDMASREQ (0x1UL << 11) +#define ITOP_MASK_TXDMABREQ (0x1UL << 12) +#define ITOP_MASK_TXDMASREQ (0x1UL << 13) + +/* + * SSP Test Data Register - SSP_TDR + */ +#define TDR_MASK_TESTDATA (0xFFFFFFFF) + +/* + * Message State + * we use the spi_message.state (void *) pointer to + * hold a single state value, that's why all this + * (void *) casting is done here. + */ +#define STATE_START ((void *) 0) +#define STATE_RUNNING ((void *) 1) +#define STATE_DONE ((void *) 2) +#define STATE_ERROR ((void *) -1) + +/* + * SSP State - Whether Enabled or Disabled + */ +#define SSP_DISABLED (0) +#define SSP_ENABLED (1) + +/* + * SSP DMA State - Whether DMA Enabled or Disabled + */ +#define SSP_DMA_DISABLED (0) +#define SSP_DMA_ENABLED (1) + +/* + * SSP Clock Defaults + */ +#define SSP_DEFAULT_CLKRATE 0x2 +#define SSP_DEFAULT_PRESCALE 0x40 + +/* + * SSP Clock Parameter ranges + */ +#define CPSDVR_MIN 0x02 +#define CPSDVR_MAX 0xFE +#define SCR_MIN 0x00 +#define SCR_MAX 0xFF + +/* + * SSP Interrupt related Macros + */ +#define DEFAULT_SSP_REG_IMSC 0x0UL +#define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC +#define ENABLE_ALL_INTERRUPTS (~DEFAULT_SSP_REG_IMSC) + +#define CLEAR_ALL_INTERRUPTS 0x3 + +#define SPI_POLLING_TIMEOUT 1000 + + +/* + * The type of reading going on on this chip + */ +enum ssp_reading { + READING_NULL, + READING_U8, + READING_U16, + READING_U32 +}; + +/** + * The type of writing going on on this chip + */ +enum ssp_writing { + WRITING_NULL, + WRITING_U8, + WRITING_U16, + WRITING_U32 +}; + +/** + * struct vendor_data - vendor-specific config parameters + * for PL022 derivates + * @fifodepth: depth of FIFOs (both) + * @max_bpw: maximum number of bits per word + * @unidir: supports unidirection transfers + * @extended_cr: 32 bit wide control register 0 with extra + * features and extra features in CR1 as found in the ST variants + * @pl023: supports a subset of the ST extensions called "PL023" + */ +struct vendor_data { + int fifodepth; + int max_bpw; + bool unidir; + bool extended_cr; + bool pl023; + bool loopback; +}; + +/** + * struct pl022 - This is the private SSP driver data structure + * @adev: AMBA device model hookup + * @vendor: vendor data for the IP block + * @phybase: the physical memory where the SSP device resides + * @virtbase: the virtual memory where the SSP is mapped + * @clk: outgoing clock "SPICLK" for the SPI bus + * @master: SPI framework hookup + * @master_info: controller-specific data from machine setup + * @workqueue: a workqueue on which any spi_message request is queued + * @pump_messages: work struct for scheduling work to the workqueue + * @queue_lock: spinlock to syncronise access to message queue + * @queue: message queue + * @busy: workqueue is busy + * @running: workqueue is running + * @pump_transfers: Tasklet used in Interrupt Transfer mode + * @cur_msg: Pointer to current spi_message being processed + * @cur_transfer: Pointer to current spi_transfer + * @cur_chip: pointer to current clients chip(assigned from controller_state) + * @tx: current position in TX buffer to be read + * @tx_end: end position in TX buffer to be read + * @rx: current position in RX buffer to be written + * @rx_end: end position in RX buffer to be written + * @read: the type of read currently going on + * @write: the type of write currently going on + * @exp_fifo_level: expected FIFO level + * @dma_rx_channel: optional channel for RX DMA + * @dma_tx_channel: optional channel for TX DMA + * @sgt_rx: scattertable for the RX transfer + * @sgt_tx: scattertable for the TX transfer + * @dummypage: a dummy page used for driving data on the bus with DMA + */ +struct pl022 { + struct amba_device *adev; + struct vendor_data *vendor; + resource_size_t phybase; + void __iomem *virtbase; + struct clk *clk; + struct spi_master *master; + struct pl022_ssp_controller *master_info; + /* Driver message queue */ + struct workqueue_struct *workqueue; + struct work_struct pump_messages; + spinlock_t queue_lock; + struct list_head queue; + bool busy; + bool running; + /* Message transfer pump */ + struct tasklet_struct pump_transfers; + struct spi_message *cur_msg; + struct spi_transfer *cur_transfer; + struct chip_data *cur_chip; + void *tx; + void *tx_end; + void *rx; + void *rx_end; + enum ssp_reading read; + enum ssp_writing write; + u32 exp_fifo_level; + /* DMA settings */ +#ifdef CONFIG_DMA_ENGINE + struct dma_chan *dma_rx_channel; + struct dma_chan *dma_tx_channel; + struct sg_table sgt_rx; + struct sg_table sgt_tx; + char *dummypage; +#endif +}; + +/** + * struct chip_data - To maintain runtime state of SSP for each client chip + * @cr0: Value of control register CR0 of SSP - on later ST variants this + * register is 32 bits wide rather than just 16 + * @cr1: Value of control register CR1 of SSP + * @dmacr: Value of DMA control Register of SSP + * @cpsr: Value of Clock prescale register + * @n_bytes: how many bytes(power of 2) reqd for a given data width of client + * @enable_dma: Whether to enable DMA or not + * @read: function ptr to be used to read when doing xfer for this chip + * @write: function ptr to be used to write when doing xfer for this chip + * @cs_control: chip select callback provided by chip + * @xfer_type: polling/interrupt/DMA + * + * Runtime state of the SSP controller, maintained per chip, + * This would be set according to the current message that would be served + */ +struct chip_data { + u32 cr0; + u16 cr1; + u16 dmacr; + u16 cpsr; + u8 n_bytes; + bool enable_dma; + enum ssp_reading read; + enum ssp_writing write; + void (*cs_control) (u32 command); + int xfer_type; +}; + +/** + * null_cs_control - Dummy chip select function + * @command: select/delect the chip + * + * If no chip select function is provided by client this is used as dummy + * chip select + */ +static void null_cs_control(u32 command) +{ + pr_debug("pl022: dummy chip select control, CS=0x%x\n", command); +} + +/** + * giveback - current spi_message is over, schedule next message and call + * callback of this message. Assumes that caller already + * set message->status; dma and pio irqs are blocked + * @pl022: SSP driver private data structure + */ +static void giveback(struct pl022 *pl022) +{ + struct spi_transfer *last_transfer; + unsigned long flags; + struct spi_message *msg; + void (*curr_cs_control) (u32 command); + + /* + * This local reference to the chip select function + * is needed because we set curr_chip to NULL + * as a step toward termininating the message. + */ + curr_cs_control = pl022->cur_chip->cs_control; + spin_lock_irqsave(&pl022->queue_lock, flags); + msg = pl022->cur_msg; + pl022->cur_msg = NULL; + pl022->cur_transfer = NULL; + pl022->cur_chip = NULL; + queue_work(pl022->workqueue, &pl022->pump_messages); + spin_unlock_irqrestore(&pl022->queue_lock, flags); + + last_transfer = list_entry(msg->transfers.prev, + struct spi_transfer, + transfer_list); + + /* Delay if requested before any change in chip select */ + if (last_transfer->delay_usecs) + /* + * FIXME: This runs in interrupt context. + * Is this really smart? + */ + udelay(last_transfer->delay_usecs); + + /* + * Drop chip select UNLESS cs_change is true or we are returning + * a message with an error, or next message is for another chip + */ + if (!last_transfer->cs_change) + curr_cs_control(SSP_CHIP_DESELECT); + else { + struct spi_message *next_msg; + + /* Holding of cs was hinted, but we need to make sure + * the next message is for the same chip. Don't waste + * time with the following tests unless this was hinted. + * + * We cannot postpone this until pump_messages, because + * after calling msg->complete (below) the driver that + * sent the current message could be unloaded, which + * could invalidate the cs_control() callback... + */ + + /* get a pointer to the next message, if any */ + spin_lock_irqsave(&pl022->queue_lock, flags); + if (list_empty(&pl022->queue)) + next_msg = NULL; + else + next_msg = list_entry(pl022->queue.next, + struct spi_message, queue); + spin_unlock_irqrestore(&pl022->queue_lock, flags); + + /* see if the next and current messages point + * to the same chip + */ + if (next_msg && next_msg->spi != msg->spi) + next_msg = NULL; + if (!next_msg || msg->state == STATE_ERROR) + curr_cs_control(SSP_CHIP_DESELECT); + } + msg->state = NULL; + if (msg->complete) + msg->complete(msg->context); + /* This message is completed, so let's turn off the clocks & power */ + clk_disable(pl022->clk); + amba_pclk_disable(pl022->adev); + amba_vcore_disable(pl022->adev); +} + +/** + * flush - flush the FIFO to reach a clean state + * @pl022: SSP driver private data structure + */ +static int flush(struct pl022 *pl022) +{ + unsigned long limit = loops_per_jiffy << 1; + + dev_dbg(&pl022->adev->dev, "flush\n"); + do { + while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE) + readw(SSP_DR(pl022->virtbase)); + } while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--); + + pl022->exp_fifo_level = 0; + + return limit; +} + +/** + * restore_state - Load configuration of current chip + * @pl022: SSP driver private data structure + */ +static void restore_state(struct pl022 *pl022) +{ + struct chip_data *chip = pl022->cur_chip; + + if (pl022->vendor->extended_cr) + writel(chip->cr0, SSP_CR0(pl022->virtbase)); + else + writew(chip->cr0, SSP_CR0(pl022->virtbase)); + writew(chip->cr1, SSP_CR1(pl022->virtbase)); + writew(chip->dmacr, SSP_DMACR(pl022->virtbase)); + writew(chip->cpsr, SSP_CPSR(pl022->virtbase)); + writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); + writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); +} + +/* + * Default SSP Register Values + */ +#define DEFAULT_SSP_REG_CR0 ( \ + GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0) | \ + GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 4) | \ + GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \ + GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \ + GEN_MASK_BITS(SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) \ +) + +/* ST versions have slightly different bit layout */ +#define DEFAULT_SSP_REG_CR0_ST ( \ + GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS_ST, 0) | \ + GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP_ST, 5) | \ + GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \ + GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \ + GEN_MASK_BITS(SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \ + GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS_ST, 16) | \ + GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF_ST, 21) \ +) + +/* The PL023 version is slightly different again */ +#define DEFAULT_SSP_REG_CR0_ST_PL023 ( \ + GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS_ST, 0) | \ + GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \ + GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \ + GEN_MASK_BITS(SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) \ +) + +#define DEFAULT_SSP_REG_CR1 ( \ + GEN_MASK_BITS(LOOPBACK_DISABLED, SSP_CR1_MASK_LBM, 0) | \ + GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \ + GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \ + GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) \ +) + +/* ST versions extend this register to use all 16 bits */ +#define DEFAULT_SSP_REG_CR1_ST ( \ + DEFAULT_SSP_REG_CR1 | \ + GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN_ST, 4) | \ + GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN_ST, 5) | \ + GEN_MASK_BITS(SSP_MWIRE_WAIT_ZERO, SSP_CR1_MASK_MWAIT_ST, 6) |\ + GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL_ST, 7) | \ + GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL_ST, 10) \ +) + +/* + * The PL023 variant has further differences: no loopback mode, no microwire + * support, and a new clock feedback delay setting. + */ +#define DEFAULT_SSP_REG_CR1_ST_PL023 ( \ + GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \ + GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \ + GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) | \ + GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN_ST, 4) | \ + GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN_ST, 5) | \ + GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL_ST, 7) | \ + GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL_ST, 10) | \ + GEN_MASK_BITS(SSP_FEEDBACK_CLK_DELAY_NONE, SSP_CR1_MASK_FBCLKDEL_ST, 13) \ +) + +#define DEFAULT_SSP_REG_CPSR ( \ + GEN_MASK_BITS(SSP_DEFAULT_PRESCALE, SSP_CPSR_MASK_CPSDVSR, 0) \ +) + +#define DEFAULT_SSP_REG_DMACR (\ + GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0) | \ + GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_TXDMAE, 1) \ +) + +/** + * load_ssp_default_config - Load default configuration for SSP + * @pl022: SSP driver private data structure + */ +static void load_ssp_default_config(struct pl022 *pl022) +{ + if (pl022->vendor->pl023) { + writel(DEFAULT_SSP_REG_CR0_ST_PL023, SSP_CR0(pl022->virtbase)); + writew(DEFAULT_SSP_REG_CR1_ST_PL023, SSP_CR1(pl022->virtbase)); + } else if (pl022->vendor->extended_cr) { + writel(DEFAULT_SSP_REG_CR0_ST, SSP_CR0(pl022->virtbase)); + writew(DEFAULT_SSP_REG_CR1_ST, SSP_CR1(pl022->virtbase)); + } else { + writew(DEFAULT_SSP_REG_CR0, SSP_CR0(pl022->virtbase)); + writew(DEFAULT_SSP_REG_CR1, SSP_CR1(pl022->virtbase)); + } + writew(DEFAULT_SSP_REG_DMACR, SSP_DMACR(pl022->virtbase)); + writew(DEFAULT_SSP_REG_CPSR, SSP_CPSR(pl022->virtbase)); + writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); + writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); +} + +/** + * This will write to TX and read from RX according to the parameters + * set in pl022. + */ +static void readwriter(struct pl022 *pl022) +{ + + /* + * The FIFO depth is different between primecell variants. + * I believe filling in too much in the FIFO might cause + * errons in 8bit wide transfers on ARM variants (just 8 words + * FIFO, means only 8x8 = 64 bits in FIFO) at least. + * + * To prevent this issue, the TX FIFO is only filled to the + * unused RX FIFO fill length, regardless of what the TX + * FIFO status flag indicates. + */ + dev_dbg(&pl022->adev->dev, + "%s, rx: %p, rxend: %p, tx: %p, txend: %p\n", + __func__, pl022->rx, pl022->rx_end, pl022->tx, pl022->tx_end); + + /* Read as much as you can */ + while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE) + && (pl022->rx < pl022->rx_end)) { + switch (pl022->read) { + case READING_NULL: + readw(SSP_DR(pl022->virtbase)); + break; + case READING_U8: + *(u8 *) (pl022->rx) = + readw(SSP_DR(pl022->virtbase)) & 0xFFU; + break; + case READING_U16: + *(u16 *) (pl022->rx) = + (u16) readw(SSP_DR(pl022->virtbase)); + break; + case READING_U32: + *(u32 *) (pl022->rx) = + readl(SSP_DR(pl022->virtbase)); + break; + } + pl022->rx += (pl022->cur_chip->n_bytes); + pl022->exp_fifo_level--; + } + /* + * Write as much as possible up to the RX FIFO size + */ + while ((pl022->exp_fifo_level < pl022->vendor->fifodepth) + && (pl022->tx < pl022->tx_end)) { + switch (pl022->write) { + case WRITING_NULL: + writew(0x0, SSP_DR(pl022->virtbase)); + break; + case WRITING_U8: + writew(*(u8 *) (pl022->tx), SSP_DR(pl022->virtbase)); + break; + case WRITING_U16: + writew((*(u16 *) (pl022->tx)), SSP_DR(pl022->virtbase)); + break; + case WRITING_U32: + writel(*(u32 *) (pl022->tx), SSP_DR(pl022->virtbase)); + break; + } + pl022->tx += (pl022->cur_chip->n_bytes); + pl022->exp_fifo_level++; + /* + * This inner reader takes care of things appearing in the RX + * FIFO as we're transmitting. This will happen a lot since the + * clock starts running when you put things into the TX FIFO, + * and then things are continuously clocked into the RX FIFO. + */ + while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE) + && (pl022->rx < pl022->rx_end)) { + switch (pl022->read) { + case READING_NULL: + readw(SSP_DR(pl022->virtbase)); + break; + case READING_U8: + *(u8 *) (pl022->rx) = + readw(SSP_DR(pl022->virtbase)) & 0xFFU; + break; + case READING_U16: + *(u16 *) (pl022->rx) = + (u16) readw(SSP_DR(pl022->virtbase)); + break; + case READING_U32: + *(u32 *) (pl022->rx) = + readl(SSP_DR(pl022->virtbase)); + break; + } + pl022->rx += (pl022->cur_chip->n_bytes); + pl022->exp_fifo_level--; + } + } + /* + * When we exit here the TX FIFO should be full and the RX FIFO + * should be empty + */ +} + + +/** + * next_transfer - Move to the Next transfer in the current spi message + * @pl022: SSP driver private data structure + * + * This function moves though the linked list of spi transfers in the + * current spi message and returns with the state of current spi + * message i.e whether its last transfer is done(STATE_DONE) or + * Next transfer is ready(STATE_RUNNING) + */ +static void *next_transfer(struct pl022 *pl022) +{ + struct spi_message *msg = pl022->cur_msg; + struct spi_transfer *trans = pl022->cur_transfer; + + /* Move to next transfer */ + if (trans->transfer_list.next != &msg->transfers) { + pl022->cur_transfer = + list_entry(trans->transfer_list.next, + struct spi_transfer, transfer_list); + return STATE_RUNNING; + } + return STATE_DONE; +} + +/* + * This DMA functionality is only compiled in if we have + * access to the generic DMA devices/DMA engine. + */ +#ifdef CONFIG_DMA_ENGINE +static void unmap_free_dma_scatter(struct pl022 *pl022) +{ + /* Unmap and free the SG tables */ + dma_unmap_sg(pl022->dma_tx_channel->device->dev, pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, DMA_TO_DEVICE); + dma_unmap_sg(pl022->dma_rx_channel->device->dev, pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, DMA_FROM_DEVICE); + sg_free_table(&pl022->sgt_rx); + sg_free_table(&pl022->sgt_tx); +} + +static void dma_callback(void *data) +{ + struct pl022 *pl022 = data; + struct spi_message *msg = pl022->cur_msg; + + BUG_ON(!pl022->sgt_rx.sgl); + +#ifdef VERBOSE_DEBUG + /* + * Optionally dump out buffers to inspect contents, this is + * good if you want to convince yourself that the loopback + * read/write contents are the same, when adopting to a new + * DMA engine. + */ + { + struct scatterlist *sg; + unsigned int i; + + dma_sync_sg_for_cpu(&pl022->adev->dev, + pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, + DMA_FROM_DEVICE); + + for_each_sg(pl022->sgt_rx.sgl, sg, pl022->sgt_rx.nents, i) { + dev_dbg(&pl022->adev->dev, "SPI RX SG ENTRY: %d", i); + print_hex_dump(KERN_ERR, "SPI RX: ", + DUMP_PREFIX_OFFSET, + 16, + 1, + sg_virt(sg), + sg_dma_len(sg), + 1); + } + for_each_sg(pl022->sgt_tx.sgl, sg, pl022->sgt_tx.nents, i) { + dev_dbg(&pl022->adev->dev, "SPI TX SG ENTRY: %d", i); + print_hex_dump(KERN_ERR, "SPI TX: ", + DUMP_PREFIX_OFFSET, + 16, + 1, + sg_virt(sg), + sg_dma_len(sg), + 1); + } + } +#endif + + unmap_free_dma_scatter(pl022); + + /* Update total bytes transferred */ + msg->actual_length += pl022->cur_transfer->len; + if (pl022->cur_transfer->cs_change) + pl022->cur_chip-> + cs_control(SSP_CHIP_DESELECT); + + /* Move to next transfer */ + msg->state = next_transfer(pl022); + tasklet_schedule(&pl022->pump_transfers); +} + +static void setup_dma_scatter(struct pl022 *pl022, + void *buffer, + unsigned int length, + struct sg_table *sgtab) +{ + struct scatterlist *sg; + int bytesleft = length; + void *bufp = buffer; + int mapbytes; + int i; + + if (buffer) { + for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { + /* + * If there are less bytes left than what fits + * in the current page (plus page alignment offset) + * we just feed in this, else we stuff in as much + * as we can. + */ + if (bytesleft < (PAGE_SIZE - offset_in_page(bufp))) + mapbytes = bytesleft; + else + mapbytes = PAGE_SIZE - offset_in_page(bufp); + sg_set_page(sg, virt_to_page(bufp), + mapbytes, offset_in_page(bufp)); + bufp += mapbytes; + bytesleft -= mapbytes; + dev_dbg(&pl022->adev->dev, + "set RX/TX target page @ %p, %d bytes, %d left\n", + bufp, mapbytes, bytesleft); + } + } else { + /* Map the dummy buffer on every page */ + for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { + if (bytesleft < PAGE_SIZE) + mapbytes = bytesleft; + else + mapbytes = PAGE_SIZE; + sg_set_page(sg, virt_to_page(pl022->dummypage), + mapbytes, 0); + bytesleft -= mapbytes; + dev_dbg(&pl022->adev->dev, + "set RX/TX to dummy page %d bytes, %d left\n", + mapbytes, bytesleft); + + } + } + BUG_ON(bytesleft); +} + +/** + * configure_dma - configures the channels for the next transfer + * @pl022: SSP driver's private data structure + */ +static int configure_dma(struct pl022 *pl022) +{ + struct dma_slave_config rx_conf = { + .src_addr = SSP_DR(pl022->phybase), + .direction = DMA_FROM_DEVICE, + .src_maxburst = pl022->vendor->fifodepth >> 1, + }; + struct dma_slave_config tx_conf = { + .dst_addr = SSP_DR(pl022->phybase), + .direction = DMA_TO_DEVICE, + .dst_maxburst = pl022->vendor->fifodepth >> 1, + }; + unsigned int pages; + int ret; + int rx_sglen, tx_sglen; + struct dma_chan *rxchan = pl022->dma_rx_channel; + struct dma_chan *txchan = pl022->dma_tx_channel; + struct dma_async_tx_descriptor *rxdesc; + struct dma_async_tx_descriptor *txdesc; + + /* Check that the channels are available */ + if (!rxchan || !txchan) + return -ENODEV; + + switch (pl022->read) { + case READING_NULL: + /* Use the same as for writing */ + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; + break; + case READING_U8: + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + break; + case READING_U16: + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + break; + case READING_U32: + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + break; + } + + switch (pl022->write) { + case WRITING_NULL: + /* Use the same as for reading */ + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; + break; + case WRITING_U8: + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + break; + case WRITING_U16: + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + break; + case WRITING_U32: + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + break; + } + + /* SPI pecularity: we need to read and write the same width */ + if (rx_conf.src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) + rx_conf.src_addr_width = tx_conf.dst_addr_width; + if (tx_conf.dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) + tx_conf.dst_addr_width = rx_conf.src_addr_width; + BUG_ON(rx_conf.src_addr_width != tx_conf.dst_addr_width); + + dmaengine_slave_config(rxchan, &rx_conf); + dmaengine_slave_config(txchan, &tx_conf); + + /* Create sglists for the transfers */ + pages = (pl022->cur_transfer->len >> PAGE_SHIFT) + 1; + dev_dbg(&pl022->adev->dev, "using %d pages for transfer\n", pages); + + ret = sg_alloc_table(&pl022->sgt_rx, pages, GFP_KERNEL); + if (ret) + goto err_alloc_rx_sg; + + ret = sg_alloc_table(&pl022->sgt_tx, pages, GFP_KERNEL); + if (ret) + goto err_alloc_tx_sg; + + /* Fill in the scatterlists for the RX+TX buffers */ + setup_dma_scatter(pl022, pl022->rx, + pl022->cur_transfer->len, &pl022->sgt_rx); + setup_dma_scatter(pl022, pl022->tx, + pl022->cur_transfer->len, &pl022->sgt_tx); + + /* Map DMA buffers */ + rx_sglen = dma_map_sg(rxchan->device->dev, pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, DMA_FROM_DEVICE); + if (!rx_sglen) + goto err_rx_sgmap; + + tx_sglen = dma_map_sg(txchan->device->dev, pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, DMA_TO_DEVICE); + if (!tx_sglen) + goto err_tx_sgmap; + + /* Send both scatterlists */ + rxdesc = rxchan->device->device_prep_slave_sg(rxchan, + pl022->sgt_rx.sgl, + rx_sglen, + DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!rxdesc) + goto err_rxdesc; + + txdesc = txchan->device->device_prep_slave_sg(txchan, + pl022->sgt_tx.sgl, + tx_sglen, + DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!txdesc) + goto err_txdesc; + + /* Put the callback on the RX transfer only, that should finish last */ + rxdesc->callback = dma_callback; + rxdesc->callback_param = pl022; + + /* Submit and fire RX and TX with TX last so we're ready to read! */ + dmaengine_submit(rxdesc); + dmaengine_submit(txdesc); + dma_async_issue_pending(rxchan); + dma_async_issue_pending(txchan); + + return 0; + +err_txdesc: + dmaengine_terminate_all(txchan); +err_rxdesc: + dmaengine_terminate_all(rxchan); + dma_unmap_sg(txchan->device->dev, pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, DMA_TO_DEVICE); +err_tx_sgmap: + dma_unmap_sg(rxchan->device->dev, pl022->sgt_rx.sgl, + pl022->sgt_tx.nents, DMA_FROM_DEVICE); +err_rx_sgmap: + sg_free_table(&pl022->sgt_tx); +err_alloc_tx_sg: + sg_free_table(&pl022->sgt_rx); +err_alloc_rx_sg: + return -ENOMEM; +} + +static int __init pl022_dma_probe(struct pl022 *pl022) +{ + dma_cap_mask_t mask; + + /* Try to acquire a generic DMA engine slave channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + /* + * We need both RX and TX channels to do DMA, else do none + * of them. + */ + pl022->dma_rx_channel = dma_request_channel(mask, + pl022->master_info->dma_filter, + pl022->master_info->dma_rx_param); + if (!pl022->dma_rx_channel) { + dev_dbg(&pl022->adev->dev, "no RX DMA channel!\n"); + goto err_no_rxchan; + } + + pl022->dma_tx_channel = dma_request_channel(mask, + pl022->master_info->dma_filter, + pl022->master_info->dma_tx_param); + if (!pl022->dma_tx_channel) { + dev_dbg(&pl022->adev->dev, "no TX DMA channel!\n"); + goto err_no_txchan; + } + + pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!pl022->dummypage) { + dev_dbg(&pl022->adev->dev, "no DMA dummypage!\n"); + goto err_no_dummypage; + } + + dev_info(&pl022->adev->dev, "setup for DMA on RX %s, TX %s\n", + dma_chan_name(pl022->dma_rx_channel), + dma_chan_name(pl022->dma_tx_channel)); + + return 0; + +err_no_dummypage: + dma_release_channel(pl022->dma_tx_channel); +err_no_txchan: + dma_release_channel(pl022->dma_rx_channel); + pl022->dma_rx_channel = NULL; +err_no_rxchan: + dev_err(&pl022->adev->dev, + "Failed to work in dma mode, work without dma!\n"); + return -ENODEV; +} + +static void terminate_dma(struct pl022 *pl022) +{ + struct dma_chan *rxchan = pl022->dma_rx_channel; + struct dma_chan *txchan = pl022->dma_tx_channel; + + dmaengine_terminate_all(rxchan); + dmaengine_terminate_all(txchan); + unmap_free_dma_scatter(pl022); +} + +static void pl022_dma_remove(struct pl022 *pl022) +{ + if (pl022->busy) + terminate_dma(pl022); + if (pl022->dma_tx_channel) + dma_release_channel(pl022->dma_tx_channel); + if (pl022->dma_rx_channel) + dma_release_channel(pl022->dma_rx_channel); + kfree(pl022->dummypage); +} + +#else +static inline int configure_dma(struct pl022 *pl022) +{ + return -ENODEV; +} + +static inline int pl022_dma_probe(struct pl022 *pl022) +{ + return 0; +} + +static inline void pl022_dma_remove(struct pl022 *pl022) +{ +} +#endif + +/** + * pl022_interrupt_handler - Interrupt handler for SSP controller + * + * This function handles interrupts generated for an interrupt based transfer. + * If a receive overrun (ROR) interrupt is there then we disable SSP, flag the + * current message's state as STATE_ERROR and schedule the tasklet + * pump_transfers which will do the postprocessing of the current message by + * calling giveback(). Otherwise it reads data from RX FIFO till there is no + * more data, and writes data in TX FIFO till it is not full. If we complete + * the transfer we move to the next transfer and schedule the tasklet. + */ +static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) +{ + struct pl022 *pl022 = dev_id; + struct spi_message *msg = pl022->cur_msg; + u16 irq_status = 0; + u16 flag = 0; + + if (unlikely(!msg)) { + dev_err(&pl022->adev->dev, + "bad message state in interrupt handler"); + /* Never fail */ + return IRQ_HANDLED; + } + + /* Read the Interrupt Status Register */ + irq_status = readw(SSP_MIS(pl022->virtbase)); + + if (unlikely(!irq_status)) + return IRQ_NONE; + + /* + * This handles the FIFO interrupts, the timeout + * interrupts are flatly ignored, they cannot be + * trusted. + */ + if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) { + /* + * Overrun interrupt - bail out since our Data has been + * corrupted + */ + dev_err(&pl022->adev->dev, "FIFO overrun\n"); + if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF) + dev_err(&pl022->adev->dev, + "RXFIFO is full\n"); + if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF) + dev_err(&pl022->adev->dev, + "TXFIFO is full\n"); + + /* + * Disable and clear interrupts, disable SSP, + * mark message with bad status so it can be + * retried. + */ + writew(DISABLE_ALL_INTERRUPTS, + SSP_IMSC(pl022->virtbase)); + writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); + writew((readw(SSP_CR1(pl022->virtbase)) & + (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); + msg->state = STATE_ERROR; + + /* Schedule message queue handler */ + tasklet_schedule(&pl022->pump_transfers); + return IRQ_HANDLED; + } + + readwriter(pl022); + + if ((pl022->tx == pl022->tx_end) && (flag == 0)) { + flag = 1; + /* Disable Transmit interrupt */ + writew(readw(SSP_IMSC(pl022->virtbase)) & + (~SSP_IMSC_MASK_TXIM), + SSP_IMSC(pl022->virtbase)); + } + + /* + * Since all transactions must write as much as shall be read, + * we can conclude the entire transaction once RX is complete. + * At this point, all TX will always be finished. + */ + if (pl022->rx >= pl022->rx_end) { + writew(DISABLE_ALL_INTERRUPTS, + SSP_IMSC(pl022->virtbase)); + writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); + if (unlikely(pl022->rx > pl022->rx_end)) { + dev_warn(&pl022->adev->dev, "read %u surplus " + "bytes (did you request an odd " + "number of bytes on a 16bit bus?)\n", + (u32) (pl022->rx - pl022->rx_end)); + } + /* Update total bytes transferred */ + msg->actual_length += pl022->cur_transfer->len; + if (pl022->cur_transfer->cs_change) + pl022->cur_chip-> + cs_control(SSP_CHIP_DESELECT); + /* Move to next transfer */ + msg->state = next_transfer(pl022); + tasklet_schedule(&pl022->pump_transfers); + return IRQ_HANDLED; + } + + return IRQ_HANDLED; +} + +/** + * This sets up the pointers to memory for the next message to + * send out on the SPI bus. + */ +static int set_up_next_transfer(struct pl022 *pl022, + struct spi_transfer *transfer) +{ + int residue; + + /* Sanity check the message for this bus width */ + residue = pl022->cur_transfer->len % pl022->cur_chip->n_bytes; + if (unlikely(residue != 0)) { + dev_err(&pl022->adev->dev, + "message of %u bytes to transmit but the current " + "chip bus has a data width of %u bytes!\n", + pl022->cur_transfer->len, + pl022->cur_chip->n_bytes); + dev_err(&pl022->adev->dev, "skipping this message\n"); + return -EIO; + } + pl022->tx = (void *)transfer->tx_buf; + pl022->tx_end = pl022->tx + pl022->cur_transfer->len; + pl022->rx = (void *)transfer->rx_buf; + pl022->rx_end = pl022->rx + pl022->cur_transfer->len; + pl022->write = + pl022->tx ? pl022->cur_chip->write : WRITING_NULL; + pl022->read = pl022->rx ? pl022->cur_chip->read : READING_NULL; + return 0; +} + +/** + * pump_transfers - Tasklet function which schedules next transfer + * when running in interrupt or DMA transfer mode. + * @data: SSP driver private data structure + * + */ +static void pump_transfers(unsigned long data) +{ + struct pl022 *pl022 = (struct pl022 *) data; + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + + /* Get current state information */ + message = pl022->cur_msg; + transfer = pl022->cur_transfer; + + /* Handle for abort */ + if (message->state == STATE_ERROR) { + message->status = -EIO; + giveback(pl022); + return; + } + + /* Handle end of message */ + if (message->state == STATE_DONE) { + message->status = 0; + giveback(pl022); + return; + } + + /* Delay if requested at end of transfer before CS change */ + if (message->state == STATE_RUNNING) { + previous = list_entry(transfer->transfer_list.prev, + struct spi_transfer, + transfer_list); + if (previous->delay_usecs) + /* + * FIXME: This runs in interrupt context. + * Is this really smart? + */ + udelay(previous->delay_usecs); + + /* Drop chip select only if cs_change is requested */ + if (previous->cs_change) + pl022->cur_chip->cs_control(SSP_CHIP_SELECT); + } else { + /* STATE_START */ + message->state = STATE_RUNNING; + } + + if (set_up_next_transfer(pl022, transfer)) { + message->state = STATE_ERROR; + message->status = -EIO; + giveback(pl022); + return; + } + /* Flush the FIFOs and let's go! */ + flush(pl022); + + if (pl022->cur_chip->enable_dma) { + if (configure_dma(pl022)) { + dev_dbg(&pl022->adev->dev, + "configuration of DMA failed, fall back to interrupt mode\n"); + goto err_config_dma; + } + return; + } + +err_config_dma: + writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); +} + +static void do_interrupt_dma_transfer(struct pl022 *pl022) +{ + u32 irqflags = ENABLE_ALL_INTERRUPTS; + + /* Enable target chip */ + pl022->cur_chip->cs_control(SSP_CHIP_SELECT); + if (set_up_next_transfer(pl022, pl022->cur_transfer)) { + /* Error path */ + pl022->cur_msg->state = STATE_ERROR; + pl022->cur_msg->status = -EIO; + giveback(pl022); + return; + } + /* If we're using DMA, set up DMA here */ + if (pl022->cur_chip->enable_dma) { + /* Configure DMA transfer */ + if (configure_dma(pl022)) { + dev_dbg(&pl022->adev->dev, + "configuration of DMA failed, fall back to interrupt mode\n"); + goto err_config_dma; + } + /* Disable interrupts in DMA mode, IRQ from DMA controller */ + irqflags = DISABLE_ALL_INTERRUPTS; + } +err_config_dma: + /* Enable SSP, turn on interrupts */ + writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), + SSP_CR1(pl022->virtbase)); + writew(irqflags, SSP_IMSC(pl022->virtbase)); +} + +static void do_polling_transfer(struct pl022 *pl022) +{ + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + struct chip_data *chip; + unsigned long time, timeout; + + chip = pl022->cur_chip; + message = pl022->cur_msg; + + while (message->state != STATE_DONE) { + /* Handle for abort */ + if (message->state == STATE_ERROR) + break; + transfer = pl022->cur_transfer; + + /* Delay if requested at end of transfer */ + if (message->state == STATE_RUNNING) { + previous = + list_entry(transfer->transfer_list.prev, + struct spi_transfer, transfer_list); + if (previous->delay_usecs) + udelay(previous->delay_usecs); + if (previous->cs_change) + pl022->cur_chip->cs_control(SSP_CHIP_SELECT); + } else { + /* STATE_START */ + message->state = STATE_RUNNING; + pl022->cur_chip->cs_control(SSP_CHIP_SELECT); + } + + /* Configuration Changing Per Transfer */ + if (set_up_next_transfer(pl022, transfer)) { + /* Error path */ + message->state = STATE_ERROR; + break; + } + /* Flush FIFOs and enable SSP */ + flush(pl022); + writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), + SSP_CR1(pl022->virtbase)); + + dev_dbg(&pl022->adev->dev, "polling transfer ongoing ...\n"); + + timeout = jiffies + msecs_to_jiffies(SPI_POLLING_TIMEOUT); + while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end) { + time = jiffies; + readwriter(pl022); + if (time_after(time, timeout)) { + dev_warn(&pl022->adev->dev, + "%s: timeout!\n", __func__); + message->state = STATE_ERROR; + goto out; + } + cpu_relax(); + } + + /* Update total byte transferred */ + message->actual_length += pl022->cur_transfer->len; + if (pl022->cur_transfer->cs_change) + pl022->cur_chip->cs_control(SSP_CHIP_DESELECT); + /* Move to next transfer */ + message->state = next_transfer(pl022); + } +out: + /* Handle end of message */ + if (message->state == STATE_DONE) + message->status = 0; + else + message->status = -EIO; + + giveback(pl022); + return; +} + +/** + * pump_messages - Workqueue function which processes spi message queue + * @data: pointer to private data of SSP driver + * + * This function checks if there is any spi message in the queue that + * needs processing and delegate control to appropriate function + * do_polling_transfer()/do_interrupt_dma_transfer() + * based on the kind of the transfer + * + */ +static void pump_messages(struct work_struct *work) +{ + struct pl022 *pl022 = + container_of(work, struct pl022, pump_messages); + unsigned long flags; + + /* Lock queue and check for queue work */ + spin_lock_irqsave(&pl022->queue_lock, flags); + if (list_empty(&pl022->queue) || !pl022->running) { + pl022->busy = false; + spin_unlock_irqrestore(&pl022->queue_lock, flags); + return; + } + /* Make sure we are not already running a message */ + if (pl022->cur_msg) { + spin_unlock_irqrestore(&pl022->queue_lock, flags); + return; + } + /* Extract head of queue */ + pl022->cur_msg = + list_entry(pl022->queue.next, struct spi_message, queue); + + list_del_init(&pl022->cur_msg->queue); + pl022->busy = true; + spin_unlock_irqrestore(&pl022->queue_lock, flags); + + /* Initial message state */ + pl022->cur_msg->state = STATE_START; + pl022->cur_transfer = list_entry(pl022->cur_msg->transfers.next, + struct spi_transfer, + transfer_list); + + /* Setup the SPI using the per chip configuration */ + pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi); + /* + * We enable the core voltage and clocks here, then the clocks + * and core will be disabled when giveback() is called in each method + * (poll/interrupt/DMA) + */ + amba_vcore_enable(pl022->adev); + amba_pclk_enable(pl022->adev); + clk_enable(pl022->clk); + restore_state(pl022); + flush(pl022); + + if (pl022->cur_chip->xfer_type == POLLING_TRANSFER) + do_polling_transfer(pl022); + else + do_interrupt_dma_transfer(pl022); +} + + +static int __init init_queue(struct pl022 *pl022) +{ + INIT_LIST_HEAD(&pl022->queue); + spin_lock_init(&pl022->queue_lock); + + pl022->running = false; + pl022->busy = false; + + tasklet_init(&pl022->pump_transfers, + pump_transfers, (unsigned long)pl022); + + INIT_WORK(&pl022->pump_messages, pump_messages); + pl022->workqueue = create_singlethread_workqueue( + dev_name(pl022->master->dev.parent)); + if (pl022->workqueue == NULL) + return -EBUSY; + + return 0; +} + + +static int start_queue(struct pl022 *pl022) +{ + unsigned long flags; + + spin_lock_irqsave(&pl022->queue_lock, flags); + + if (pl022->running || pl022->busy) { + spin_unlock_irqrestore(&pl022->queue_lock, flags); + return -EBUSY; + } + + pl022->running = true; + pl022->cur_msg = NULL; + pl022->cur_transfer = NULL; + pl022->cur_chip = NULL; + spin_unlock_irqrestore(&pl022->queue_lock, flags); + + queue_work(pl022->workqueue, &pl022->pump_messages); + + return 0; +} + + +static int stop_queue(struct pl022 *pl022) +{ + unsigned long flags; + unsigned limit = 500; + int status = 0; + + spin_lock_irqsave(&pl022->queue_lock, flags); + + /* This is a bit lame, but is optimized for the common execution path. + * A wait_queue on the pl022->busy could be used, but then the common + * execution path (pump_messages) would be required to call wake_up or + * friends on every SPI message. Do this instead */ + while ((!list_empty(&pl022->queue) || pl022->busy) && limit--) { + spin_unlock_irqrestore(&pl022->queue_lock, flags); + msleep(10); + spin_lock_irqsave(&pl022->queue_lock, flags); + } + + if (!list_empty(&pl022->queue) || pl022->busy) + status = -EBUSY; + else + pl022->running = false; + + spin_unlock_irqrestore(&pl022->queue_lock, flags); + + return status; +} + +static int destroy_queue(struct pl022 *pl022) +{ + int status; + + status = stop_queue(pl022); + /* we are unloading the module or failing to load (only two calls + * to this routine), and neither call can handle a return value. + * However, destroy_workqueue calls flush_workqueue, and that will + * block until all work is done. If the reason that stop_queue + * timed out is that the work will never finish, then it does no + * good to call destroy_workqueue, so return anyway. */ + if (status != 0) + return status; + + destroy_workqueue(pl022->workqueue); + + return 0; +} + +static int verify_controller_parameters(struct pl022 *pl022, + struct pl022_config_chip const *chip_info) +{ + if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI) + || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) { + dev_err(&pl022->adev->dev, + "interface is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) && + (!pl022->vendor->unidir)) { + dev_err(&pl022->adev->dev, + "unidirectional mode not supported in this " + "hardware version\n"); + return -EINVAL; + } + if ((chip_info->hierarchy != SSP_MASTER) + && (chip_info->hierarchy != SSP_SLAVE)) { + dev_err(&pl022->adev->dev, + "hierarchy is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->com_mode != INTERRUPT_TRANSFER) + && (chip_info->com_mode != DMA_TRANSFER) + && (chip_info->com_mode != POLLING_TRANSFER)) { + dev_err(&pl022->adev->dev, + "Communication mode is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM) + || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) { + dev_err(&pl022->adev->dev, + "RX FIFO Trigger Level is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC) + || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) { + dev_err(&pl022->adev->dev, + "TX FIFO Trigger Level is configured incorrectly\n"); + return -EINVAL; + } + if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) { + if ((chip_info->ctrl_len < SSP_BITS_4) + || (chip_info->ctrl_len > SSP_BITS_32)) { + dev_err(&pl022->adev->dev, + "CTRL LEN is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO) + && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) { + dev_err(&pl022->adev->dev, + "Wait State is configured incorrectly\n"); + return -EINVAL; + } + /* Half duplex is only available in the ST Micro version */ + if (pl022->vendor->extended_cr) { + if ((chip_info->duplex != + SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) + && (chip_info->duplex != + SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) { + dev_err(&pl022->adev->dev, + "Microwire duplex mode is configured incorrectly\n"); + return -EINVAL; + } + } else { + if (chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) + dev_err(&pl022->adev->dev, + "Microwire half duplex mode requested," + " but this is only available in the" + " ST version of PL022\n"); + return -EINVAL; + } + } + return 0; +} + +/** + * pl022_transfer - transfer function registered to SPI master framework + * @spi: spi device which is requesting transfer + * @msg: spi message which is to handled is queued to driver queue + * + * This function is registered to the SPI framework for this SPI master + * controller. It will queue the spi_message in the queue of driver if + * the queue is not stopped and return. + */ +static int pl022_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct pl022 *pl022 = spi_master_get_devdata(spi->master); + unsigned long flags; + + spin_lock_irqsave(&pl022->queue_lock, flags); + + if (!pl022->running) { + spin_unlock_irqrestore(&pl022->queue_lock, flags); + return -ESHUTDOWN; + } + msg->actual_length = 0; + msg->status = -EINPROGRESS; + msg->state = STATE_START; + + list_add_tail(&msg->queue, &pl022->queue); + if (pl022->running && !pl022->busy) + queue_work(pl022->workqueue, &pl022->pump_messages); + + spin_unlock_irqrestore(&pl022->queue_lock, flags); + return 0; +} + +static int calculate_effective_freq(struct pl022 *pl022, + int freq, + struct ssp_clock_params *clk_freq) +{ + /* Lets calculate the frequency parameters */ + u16 cpsdvsr = 2; + u16 scr = 0; + bool freq_found = false; + u32 rate; + u32 max_tclk; + u32 min_tclk; + + rate = clk_get_rate(pl022->clk); + /* cpsdvscr = 2 & scr 0 */ + max_tclk = (rate / (CPSDVR_MIN * (1 + SCR_MIN))); + /* cpsdvsr = 254 & scr = 255 */ + min_tclk = (rate / (CPSDVR_MAX * (1 + SCR_MAX))); + + if ((freq <= max_tclk) && (freq >= min_tclk)) { + while (cpsdvsr <= CPSDVR_MAX && !freq_found) { + while (scr <= SCR_MAX && !freq_found) { + if ((rate / + (cpsdvsr * (1 + scr))) > freq) + scr += 1; + else { + /* + * This bool is made true when + * effective frequency >= + * target frequency is found + */ + freq_found = true; + if ((rate / + (cpsdvsr * (1 + scr))) != freq) { + if (scr == SCR_MIN) { + cpsdvsr -= 2; + scr = SCR_MAX; + } else + scr -= 1; + } + } + } + if (!freq_found) { + cpsdvsr += 2; + scr = SCR_MIN; + } + } + if (cpsdvsr != 0) { + dev_dbg(&pl022->adev->dev, + "SSP Effective Frequency is %u\n", + (rate / (cpsdvsr * (1 + scr)))); + clk_freq->cpsdvsr = (u8) (cpsdvsr & 0xFF); + clk_freq->scr = (u8) (scr & 0xFF); + dev_dbg(&pl022->adev->dev, + "SSP cpsdvsr = %d, scr = %d\n", + clk_freq->cpsdvsr, clk_freq->scr); + } + } else { + dev_err(&pl022->adev->dev, + "controller data is incorrect: out of range frequency"); + return -EINVAL; + } + return 0; +} + + +/* + * A piece of default chip info unless the platform + * supplies it. + */ +static const struct pl022_config_chip pl022_default_chip_info = { + .com_mode = POLLING_TRANSFER, + .iface = SSP_INTERFACE_MOTOROLA_SPI, + .hierarchy = SSP_SLAVE, + .slave_tx_disable = DO_NOT_DRIVE_TX, + .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, + .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, + .ctrl_len = SSP_BITS_8, + .wait_state = SSP_MWIRE_WAIT_ZERO, + .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, + .cs_control = null_cs_control, +}; + + +/** + * pl022_setup - setup function registered to SPI master framework + * @spi: spi device which is requesting setup + * + * This function is registered to the SPI framework for this SPI master + * controller. If it is the first time when setup is called by this device, + * this function will initialize the runtime state for this chip and save + * the same in the device structure. Else it will update the runtime info + * with the updated chip info. Nothing is really being written to the + * controller hardware here, that is not done until the actual transfer + * commence. + */ +static int pl022_setup(struct spi_device *spi) +{ + struct pl022_config_chip const *chip_info; + struct chip_data *chip; + struct ssp_clock_params clk_freq = {0, }; + int status = 0; + struct pl022 *pl022 = spi_master_get_devdata(spi->master); + unsigned int bits = spi->bits_per_word; + u32 tmp; + + if (!spi->max_speed_hz) + return -EINVAL; + + /* Get controller_state if one is supplied */ + chip = spi_get_ctldata(spi); + + if (chip == NULL) { + chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); + if (!chip) { + dev_err(&spi->dev, + "cannot allocate controller state\n"); + return -ENOMEM; + } + dev_dbg(&spi->dev, + "allocated memory for controller's runtime state\n"); + } + + /* Get controller data if one is supplied */ + chip_info = spi->controller_data; + + if (chip_info == NULL) { + chip_info = &pl022_default_chip_info; + /* spi_board_info.controller_data not is supplied */ + dev_dbg(&spi->dev, + "using default controller_data settings\n"); + } else + dev_dbg(&spi->dev, + "using user supplied controller_data settings\n"); + + /* + * We can override with custom divisors, else we use the board + * frequency setting + */ + if ((0 == chip_info->clk_freq.cpsdvsr) + && (0 == chip_info->clk_freq.scr)) { + status = calculate_effective_freq(pl022, + spi->max_speed_hz, + &clk_freq); + if (status < 0) + goto err_config_params; + } else { + memcpy(&clk_freq, &chip_info->clk_freq, sizeof(clk_freq)); + if ((clk_freq.cpsdvsr % 2) != 0) + clk_freq.cpsdvsr = + clk_freq.cpsdvsr - 1; + } + if ((clk_freq.cpsdvsr < CPSDVR_MIN) + || (clk_freq.cpsdvsr > CPSDVR_MAX)) { + dev_err(&spi->dev, + "cpsdvsr is configured incorrectly\n"); + goto err_config_params; + } + + + status = verify_controller_parameters(pl022, chip_info); + if (status) { + dev_err(&spi->dev, "controller data is incorrect"); + goto err_config_params; + } + + /* Now set controller state based on controller data */ + chip->xfer_type = chip_info->com_mode; + if (!chip_info->cs_control) { + chip->cs_control = null_cs_control; + dev_warn(&spi->dev, + "chip select function is NULL for this chip\n"); + } else + chip->cs_control = chip_info->cs_control; + + if (bits <= 3) { + /* PL022 doesn't support less than 4-bits */ + status = -ENOTSUPP; + goto err_config_params; + } else if (bits <= 8) { + dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n"); + chip->n_bytes = 1; + chip->read = READING_U8; + chip->write = WRITING_U8; + } else if (bits <= 16) { + dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n"); + chip->n_bytes = 2; + chip->read = READING_U16; + chip->write = WRITING_U16; + } else { + if (pl022->vendor->max_bpw >= 32) { + dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); + chip->n_bytes = 4; + chip->read = READING_U32; + chip->write = WRITING_U32; + } else { + dev_err(&spi->dev, + "illegal data size for this controller!\n"); + dev_err(&spi->dev, + "a standard pl022 can only handle " + "1 <= n <= 16 bit words\n"); + status = -ENOTSUPP; + goto err_config_params; + } + } + + /* Now Initialize all register settings required for this chip */ + chip->cr0 = 0; + chip->cr1 = 0; + chip->dmacr = 0; + chip->cpsr = 0; + if ((chip_info->com_mode == DMA_TRANSFER) + && ((pl022->master_info)->enable_dma)) { + chip->enable_dma = true; + dev_dbg(&spi->dev, "DMA mode set in controller state\n"); + SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, + SSP_DMACR_MASK_RXDMAE, 0); + SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, + SSP_DMACR_MASK_TXDMAE, 1); + } else { + chip->enable_dma = false; + dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n"); + SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED, + SSP_DMACR_MASK_RXDMAE, 0); + SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED, + SSP_DMACR_MASK_TXDMAE, 1); + } + + chip->cpsr = clk_freq.cpsdvsr; + + /* Special setup for the ST micro extended control registers */ + if (pl022->vendor->extended_cr) { + u32 etx; + + if (pl022->vendor->pl023) { + /* These bits are only in the PL023 */ + SSP_WRITE_BITS(chip->cr1, chip_info->clkdelay, + SSP_CR1_MASK_FBCLKDEL_ST, 13); + } else { + /* These bits are in the PL022 but not PL023 */ + SSP_WRITE_BITS(chip->cr0, chip_info->duplex, + SSP_CR0_MASK_HALFDUP_ST, 5); + SSP_WRITE_BITS(chip->cr0, chip_info->ctrl_len, + SSP_CR0_MASK_CSS_ST, 16); + SSP_WRITE_BITS(chip->cr0, chip_info->iface, + SSP_CR0_MASK_FRF_ST, 21); + SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, + SSP_CR1_MASK_MWAIT_ST, 6); + } + SSP_WRITE_BITS(chip->cr0, bits - 1, + SSP_CR0_MASK_DSS_ST, 0); + + if (spi->mode & SPI_LSB_FIRST) { + tmp = SSP_RX_LSB; + etx = SSP_TX_LSB; + } else { + tmp = SSP_RX_MSB; + etx = SSP_TX_MSB; + } + SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_RENDN_ST, 4); + SSP_WRITE_BITS(chip->cr1, etx, SSP_CR1_MASK_TENDN_ST, 5); + SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, + SSP_CR1_MASK_RXIFLSEL_ST, 7); + SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, + SSP_CR1_MASK_TXIFLSEL_ST, 10); + } else { + SSP_WRITE_BITS(chip->cr0, bits - 1, + SSP_CR0_MASK_DSS, 0); + SSP_WRITE_BITS(chip->cr0, chip_info->iface, + SSP_CR0_MASK_FRF, 4); + } + + /* Stuff that is common for all versions */ + if (spi->mode & SPI_CPOL) + tmp = SSP_CLK_POL_IDLE_HIGH; + else + tmp = SSP_CLK_POL_IDLE_LOW; + SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPO, 6); + + if (spi->mode & SPI_CPHA) + tmp = SSP_CLK_SECOND_EDGE; + else + tmp = SSP_CLK_FIRST_EDGE; + SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPH, 7); + + SSP_WRITE_BITS(chip->cr0, clk_freq.scr, SSP_CR0_MASK_SCR, 8); + /* Loopback is available on all versions except PL023 */ + if (pl022->vendor->loopback) { + if (spi->mode & SPI_LOOP) + tmp = LOOPBACK_ENABLED; + else + tmp = LOOPBACK_DISABLED; + SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_LBM, 0); + } + SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1); + SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2); + SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3); + + /* Save controller_state */ + spi_set_ctldata(spi, chip); + return status; + err_config_params: + spi_set_ctldata(spi, NULL); + kfree(chip); + return status; +} + +/** + * pl022_cleanup - cleanup function registered to SPI master framework + * @spi: spi device which is requesting cleanup + * + * This function is registered to the SPI framework for this SPI master + * controller. It will free the runtime state of chip. + */ +static void pl022_cleanup(struct spi_device *spi) +{ + struct chip_data *chip = spi_get_ctldata(spi); + + spi_set_ctldata(spi, NULL); + kfree(chip); +} + + +static int __devinit +pl022_probe(struct amba_device *adev, const struct amba_id *id) +{ + struct device *dev = &adev->dev; + struct pl022_ssp_controller *platform_info = adev->dev.platform_data; + struct spi_master *master; + struct pl022 *pl022 = NULL; /*Data for this driver */ + int status = 0; + + dev_info(&adev->dev, + "ARM PL022 driver, device ID: 0x%08x\n", adev->periphid); + if (platform_info == NULL) { + dev_err(&adev->dev, "probe - no platform data supplied\n"); + status = -ENODEV; + goto err_no_pdata; + } + + /* Allocate master with space for data */ + master = spi_alloc_master(dev, sizeof(struct pl022)); + if (master == NULL) { + dev_err(&adev->dev, "probe - cannot alloc SPI master\n"); + status = -ENOMEM; + goto err_no_master; + } + + pl022 = spi_master_get_devdata(master); + pl022->master = master; + pl022->master_info = platform_info; + pl022->adev = adev; + pl022->vendor = id->data; + + /* + * Bus Number Which has been Assigned to this SSP controller + * on this board + */ + master->bus_num = platform_info->bus_id; + master->num_chipselect = platform_info->num_chipselect; + master->cleanup = pl022_cleanup; + master->setup = pl022_setup; + master->transfer = pl022_transfer; + + /* + * Supports mode 0-3, loopback, and active low CS. Transfers are + * always MS bit first on the original pl022. + */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; + if (pl022->vendor->extended_cr) + master->mode_bits |= SPI_LSB_FIRST; + + dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num); + + status = amba_request_regions(adev, NULL); + if (status) + goto err_no_ioregion; + + pl022->phybase = adev->res.start; + pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res)); + if (pl022->virtbase == NULL) { + status = -ENOMEM; + goto err_no_ioremap; + } + printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n", + adev->res.start, pl022->virtbase); + + pl022->clk = clk_get(&adev->dev, NULL); + if (IS_ERR(pl022->clk)) { + status = PTR_ERR(pl022->clk); + dev_err(&adev->dev, "could not retrieve SSP/SPI bus clock\n"); + goto err_no_clk; + } + + /* Disable SSP */ + writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), + SSP_CR1(pl022->virtbase)); + load_ssp_default_config(pl022); + + status = request_irq(adev->irq[0], pl022_interrupt_handler, 0, "pl022", + pl022); + if (status < 0) { + dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status); + goto err_no_irq; + } + + /* Get DMA channels */ + if (platform_info->enable_dma) { + status = pl022_dma_probe(pl022); + if (status != 0) + platform_info->enable_dma = 0; + } + + /* Initialize and start queue */ + status = init_queue(pl022); + if (status != 0) { + dev_err(&adev->dev, "probe - problem initializing queue\n"); + goto err_init_queue; + } + status = start_queue(pl022); + if (status != 0) { + dev_err(&adev->dev, "probe - problem starting queue\n"); + goto err_start_queue; + } + /* Register with the SPI framework */ + amba_set_drvdata(adev, pl022); + status = spi_register_master(master); + if (status != 0) { + dev_err(&adev->dev, + "probe - problem registering spi master\n"); + goto err_spi_register; + } + dev_dbg(dev, "probe succeeded\n"); + /* + * Disable the silicon block pclk and any voltage domain and just + * power it up and clock it when it's needed + */ + amba_pclk_disable(adev); + amba_vcore_disable(adev); + return 0; + + err_spi_register: + err_start_queue: + err_init_queue: + destroy_queue(pl022); + pl022_dma_remove(pl022); + free_irq(adev->irq[0], pl022); + err_no_irq: + clk_put(pl022->clk); + err_no_clk: + iounmap(pl022->virtbase); + err_no_ioremap: + amba_release_regions(adev); + err_no_ioregion: + spi_master_put(master); + err_no_master: + err_no_pdata: + return status; +} + +static int __devexit +pl022_remove(struct amba_device *adev) +{ + struct pl022 *pl022 = amba_get_drvdata(adev); + int status = 0; + if (!pl022) + return 0; + + /* Remove the queue */ + status = destroy_queue(pl022); + if (status != 0) { + dev_err(&adev->dev, + "queue remove failed (%d)\n", status); + return status; + } + load_ssp_default_config(pl022); + pl022_dma_remove(pl022); + free_irq(adev->irq[0], pl022); + clk_disable(pl022->clk); + clk_put(pl022->clk); + iounmap(pl022->virtbase); + amba_release_regions(adev); + tasklet_disable(&pl022->pump_transfers); + spi_unregister_master(pl022->master); + spi_master_put(pl022->master); + amba_set_drvdata(adev, NULL); + dev_dbg(&adev->dev, "remove succeeded\n"); + return 0; +} + +#ifdef CONFIG_PM +static int pl022_suspend(struct amba_device *adev, pm_message_t state) +{ + struct pl022 *pl022 = amba_get_drvdata(adev); + int status = 0; + + status = stop_queue(pl022); + if (status) { + dev_warn(&adev->dev, "suspend cannot stop queue\n"); + return status; + } + + amba_vcore_enable(adev); + amba_pclk_enable(adev); + load_ssp_default_config(pl022); + amba_pclk_disable(adev); + amba_vcore_disable(adev); + dev_dbg(&adev->dev, "suspended\n"); + return 0; +} + +static int pl022_resume(struct amba_device *adev) +{ + struct pl022 *pl022 = amba_get_drvdata(adev); + int status = 0; + + /* Start the queue running */ + status = start_queue(pl022); + if (status) + dev_err(&adev->dev, "problem starting queue (%d)\n", status); + else + dev_dbg(&adev->dev, "resumed\n"); + + return status; +} +#else +#define pl022_suspend NULL +#define pl022_resume NULL +#endif /* CONFIG_PM */ + +static struct vendor_data vendor_arm = { + .fifodepth = 8, + .max_bpw = 16, + .unidir = false, + .extended_cr = false, + .pl023 = false, + .loopback = true, +}; + + +static struct vendor_data vendor_st = { + .fifodepth = 32, + .max_bpw = 32, + .unidir = false, + .extended_cr = true, + .pl023 = false, + .loopback = true, +}; + +static struct vendor_data vendor_st_pl023 = { + .fifodepth = 32, + .max_bpw = 32, + .unidir = false, + .extended_cr = true, + .pl023 = true, + .loopback = false, +}; + +static struct vendor_data vendor_db5500_pl023 = { + .fifodepth = 32, + .max_bpw = 32, + .unidir = false, + .extended_cr = true, + .pl023 = true, + .loopback = true, +}; + +static struct amba_id pl022_ids[] = { + { + /* + * ARM PL022 variant, this has a 16bit wide + * and 8 locations deep TX/RX FIFO + */ + .id = 0x00041022, + .mask = 0x000fffff, + .data = &vendor_arm, + }, + { + /* + * ST Micro derivative, this has 32bit wide + * and 32 locations deep TX/RX FIFO + */ + .id = 0x01080022, + .mask = 0xffffffff, + .data = &vendor_st, + }, + { + /* + * ST-Ericsson derivative "PL023" (this is not + * an official ARM number), this is a PL022 SSP block + * stripped to SPI mode only, it has 32bit wide + * and 32 locations deep TX/RX FIFO but no extended + * CR0/CR1 register + */ + .id = 0x00080023, + .mask = 0xffffffff, + .data = &vendor_st_pl023, + }, + { + .id = 0x10080023, + .mask = 0xffffffff, + .data = &vendor_db5500_pl023, + }, + { 0, 0 }, +}; + +static struct amba_driver pl022_driver = { + .drv = { + .name = "ssp-pl022", + }, + .id_table = pl022_ids, + .probe = pl022_probe, + .remove = __devexit_p(pl022_remove), + .suspend = pl022_suspend, + .resume = pl022_resume, +}; + + +static int __init pl022_init(void) +{ + return amba_driver_register(&pl022_driver); +} + +subsys_initcall(pl022_init); + +static void __exit pl022_exit(void) +{ + amba_driver_unregister(&pl022_driver); +} + +module_exit(pl022_exit); + +MODULE_AUTHOR("Linus Walleij "); +MODULE_DESCRIPTION("PL022 SSP Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c new file mode 100644 index 000000000000..2a298c029194 --- /dev/null +++ b/drivers/spi/spi-ppc4xx.c @@ -0,0 +1,612 @@ +/* + * SPI_PPC4XX SPI controller driver. + * + * Copyright (C) 2007 Gary Jennejohn + * Copyright 2008 Stefan Roese , DENX Software Engineering + * Copyright 2009 Harris Corporation, Steven A. Falco + * + * Based in part on drivers/spi/spi_s3c24xx.c + * + * Copyright (c) 2006 Ben Dooks + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +/* + * The PPC4xx SPI controller has no FIFO so each sent/received byte will + * generate an interrupt to the CPU. This can cause high CPU utilization. + * This driver allows platforms to reduce the interrupt load on the CPU + * during SPI transfers by setting max_speed_hz via the device tree. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +/* bits in mode register - bit 0 is MSb */ + +/* + * SPI_PPC4XX_MODE_SCP = 0 means "data latched on trailing edge of clock" + * SPI_PPC4XX_MODE_SCP = 1 means "data latched on leading edge of clock" + * Note: This is the inverse of CPHA. + */ +#define SPI_PPC4XX_MODE_SCP (0x80 >> 3) + +/* SPI_PPC4XX_MODE_SPE = 1 means "port enabled" */ +#define SPI_PPC4XX_MODE_SPE (0x80 >> 4) + +/* + * SPI_PPC4XX_MODE_RD = 0 means "MSB first" - this is the normal mode + * SPI_PPC4XX_MODE_RD = 1 means "LSB first" - this is bit-reversed mode + * Note: This is identical to SPI_LSB_FIRST. + */ +#define SPI_PPC4XX_MODE_RD (0x80 >> 5) + +/* + * SPI_PPC4XX_MODE_CI = 0 means "clock idles low" + * SPI_PPC4XX_MODE_CI = 1 means "clock idles high" + * Note: This is identical to CPOL. + */ +#define SPI_PPC4XX_MODE_CI (0x80 >> 6) + +/* + * SPI_PPC4XX_MODE_IL = 0 means "loopback disable" + * SPI_PPC4XX_MODE_IL = 1 means "loopback enable" + */ +#define SPI_PPC4XX_MODE_IL (0x80 >> 7) + +/* bits in control register */ +/* starts a transfer when set */ +#define SPI_PPC4XX_CR_STR (0x80 >> 7) + +/* bits in status register */ +/* port is busy with a transfer */ +#define SPI_PPC4XX_SR_BSY (0x80 >> 6) +/* RxD ready */ +#define SPI_PPC4XX_SR_RBR (0x80 >> 7) + +/* clock settings (SCP and CI) for various SPI modes */ +#define SPI_CLK_MODE0 (SPI_PPC4XX_MODE_SCP | 0) +#define SPI_CLK_MODE1 (0 | 0) +#define SPI_CLK_MODE2 (SPI_PPC4XX_MODE_SCP | SPI_PPC4XX_MODE_CI) +#define SPI_CLK_MODE3 (0 | SPI_PPC4XX_MODE_CI) + +#define DRIVER_NAME "spi_ppc4xx_of" + +struct spi_ppc4xx_regs { + u8 mode; + u8 rxd; + u8 txd; + u8 cr; + u8 sr; + u8 dummy; + /* + * Clock divisor modulus register + * This uses the follwing formula: + * SCPClkOut = OPBCLK/(4(CDM + 1)) + * or + * CDM = (OPBCLK/4*SCPClkOut) - 1 + * bit 0 is the MSb! + */ + u8 cdm; +}; + +/* SPI Controller driver's private data. */ +struct ppc4xx_spi { + /* bitbang has to be first */ + struct spi_bitbang bitbang; + struct completion done; + + u64 mapbase; + u64 mapsize; + int irqnum; + /* need this to set the SPI clock */ + unsigned int opb_freq; + + /* for transfers */ + int len; + int count; + /* data buffers */ + const unsigned char *tx; + unsigned char *rx; + + int *gpios; + + struct spi_ppc4xx_regs __iomem *regs; /* pointer to the registers */ + struct spi_master *master; + struct device *dev; +}; + +/* need this so we can set the clock in the chipselect routine */ +struct spi_ppc4xx_cs { + u8 mode; +}; + +static int spi_ppc4xx_txrx(struct spi_device *spi, struct spi_transfer *t) +{ + struct ppc4xx_spi *hw; + u8 data; + + dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", + t->tx_buf, t->rx_buf, t->len); + + hw = spi_master_get_devdata(spi->master); + + hw->tx = t->tx_buf; + hw->rx = t->rx_buf; + hw->len = t->len; + hw->count = 0; + + /* send the first byte */ + data = hw->tx ? hw->tx[0] : 0; + out_8(&hw->regs->txd, data); + out_8(&hw->regs->cr, SPI_PPC4XX_CR_STR); + wait_for_completion(&hw->done); + + return hw->count; +} + +static int spi_ppc4xx_setupxfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct ppc4xx_spi *hw = spi_master_get_devdata(spi->master); + struct spi_ppc4xx_cs *cs = spi->controller_state; + int scr; + u8 cdm = 0; + u32 speed; + u8 bits_per_word; + + /* Start with the generic configuration for this device. */ + bits_per_word = spi->bits_per_word; + speed = spi->max_speed_hz; + + /* + * Modify the configuration if the transfer overrides it. Do not allow + * the transfer to overwrite the generic configuration with zeros. + */ + if (t) { + if (t->bits_per_word) + bits_per_word = t->bits_per_word; + + if (t->speed_hz) + speed = min(t->speed_hz, spi->max_speed_hz); + } + + if (bits_per_word != 8) { + dev_err(&spi->dev, "invalid bits-per-word (%d)\n", + bits_per_word); + return -EINVAL; + } + + if (!speed || (speed > spi->max_speed_hz)) { + dev_err(&spi->dev, "invalid speed_hz (%d)\n", speed); + return -EINVAL; + } + + /* Write new configration */ + out_8(&hw->regs->mode, cs->mode); + + /* Set the clock */ + /* opb_freq was already divided by 4 */ + scr = (hw->opb_freq / speed) - 1; + if (scr > 0) + cdm = min(scr, 0xff); + + dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", cdm, speed); + + if (in_8(&hw->regs->cdm) != cdm) + out_8(&hw->regs->cdm, cdm); + + spin_lock(&hw->bitbang.lock); + if (!hw->bitbang.busy) { + hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE); + /* Need to ndelay here? */ + } + spin_unlock(&hw->bitbang.lock); + + return 0; +} + +static int spi_ppc4xx_setup(struct spi_device *spi) +{ + struct spi_ppc4xx_cs *cs = spi->controller_state; + + if (spi->bits_per_word != 8) { + dev_err(&spi->dev, "invalid bits-per-word (%d)\n", + spi->bits_per_word); + return -EINVAL; + } + + if (!spi->max_speed_hz) { + dev_err(&spi->dev, "invalid max_speed_hz (must be non-zero)\n"); + return -EINVAL; + } + + if (cs == NULL) { + cs = kzalloc(sizeof *cs, GFP_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + + /* + * We set all bits of the SPI0_MODE register, so, + * no need to read-modify-write + */ + cs->mode = SPI_PPC4XX_MODE_SPE; + + switch (spi->mode & (SPI_CPHA | SPI_CPOL)) { + case SPI_MODE_0: + cs->mode |= SPI_CLK_MODE0; + break; + case SPI_MODE_1: + cs->mode |= SPI_CLK_MODE1; + break; + case SPI_MODE_2: + cs->mode |= SPI_CLK_MODE2; + break; + case SPI_MODE_3: + cs->mode |= SPI_CLK_MODE3; + break; + } + + if (spi->mode & SPI_LSB_FIRST) + cs->mode |= SPI_PPC4XX_MODE_RD; + + return 0; +} + +static void spi_ppc4xx_chipsel(struct spi_device *spi, int value) +{ + struct ppc4xx_spi *hw = spi_master_get_devdata(spi->master); + unsigned int cs = spi->chip_select; + unsigned int cspol; + + /* + * If there are no chip selects at all, or if this is the special + * case of a non-existent (dummy) chip select, do nothing. + */ + + if (!hw->master->num_chipselect || hw->gpios[cs] == -EEXIST) + return; + + cspol = spi->mode & SPI_CS_HIGH ? 1 : 0; + if (value == BITBANG_CS_INACTIVE) + cspol = !cspol; + + gpio_set_value(hw->gpios[cs], cspol); +} + +static irqreturn_t spi_ppc4xx_int(int irq, void *dev_id) +{ + struct ppc4xx_spi *hw; + u8 status; + u8 data; + unsigned int count; + + hw = (struct ppc4xx_spi *)dev_id; + + status = in_8(&hw->regs->sr); + if (!status) + return IRQ_NONE; + + /* + * BSY de-asserts one cycle after the transfer is complete. The + * interrupt is asserted after the transfer is complete. The exact + * relationship is not documented, hence this code. + */ + + if (unlikely(status & SPI_PPC4XX_SR_BSY)) { + u8 lstatus; + int cnt = 0; + + dev_dbg(hw->dev, "got interrupt but spi still busy?\n"); + do { + ndelay(10); + lstatus = in_8(&hw->regs->sr); + } while (++cnt < 100 && lstatus & SPI_PPC4XX_SR_BSY); + + if (cnt >= 100) { + dev_err(hw->dev, "busywait: too many loops!\n"); + complete(&hw->done); + return IRQ_HANDLED; + } else { + /* status is always 1 (RBR) here */ + status = in_8(&hw->regs->sr); + dev_dbg(hw->dev, "loops %d status %x\n", cnt, status); + } + } + + count = hw->count; + hw->count++; + + /* RBR triggered this interrupt. Therefore, data must be ready. */ + data = in_8(&hw->regs->rxd); + if (hw->rx) + hw->rx[count] = data; + + count++; + + if (count < hw->len) { + data = hw->tx ? hw->tx[count] : 0; + out_8(&hw->regs->txd, data); + out_8(&hw->regs->cr, SPI_PPC4XX_CR_STR); + } else { + complete(&hw->done); + } + + return IRQ_HANDLED; +} + +static void spi_ppc4xx_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} + +static void spi_ppc4xx_enable(struct ppc4xx_spi *hw) +{ + /* + * On all 4xx PPC's the SPI bus is shared/multiplexed with + * the 2nd I2C bus. We need to enable the the SPI bus before + * using it. + */ + + /* need to clear bit 14 to enable SPC */ + dcri_clrset(SDR0, SDR0_PFC1, 0x80000000 >> 14, 0); +} + +static void free_gpios(struct ppc4xx_spi *hw) +{ + if (hw->master->num_chipselect) { + int i; + for (i = 0; i < hw->master->num_chipselect; i++) + if (gpio_is_valid(hw->gpios[i])) + gpio_free(hw->gpios[i]); + + kfree(hw->gpios); + hw->gpios = NULL; + } +} + +/* + * platform_device layer stuff... + */ +static int __init spi_ppc4xx_of_probe(struct platform_device *op) +{ + struct ppc4xx_spi *hw; + struct spi_master *master; + struct spi_bitbang *bbp; + struct resource resource; + struct device_node *np = op->dev.of_node; + struct device *dev = &op->dev; + struct device_node *opbnp; + int ret; + int num_gpios; + const unsigned int *clk; + + master = spi_alloc_master(dev, sizeof *hw); + if (master == NULL) + return -ENOMEM; + master->dev.of_node = np; + dev_set_drvdata(dev, master); + hw = spi_master_get_devdata(master); + hw->master = spi_master_get(master); + hw->dev = dev; + + init_completion(&hw->done); + + /* + * A count of zero implies a single SPI device without any chip-select. + * Note that of_gpio_count counts all gpios assigned to this spi master. + * This includes both "null" gpio's and real ones. + */ + num_gpios = of_gpio_count(np); + if (num_gpios) { + int i; + + hw->gpios = kzalloc(sizeof(int) * num_gpios, GFP_KERNEL); + if (!hw->gpios) { + ret = -ENOMEM; + goto free_master; + } + + for (i = 0; i < num_gpios; i++) { + int gpio; + enum of_gpio_flags flags; + + gpio = of_get_gpio_flags(np, i, &flags); + hw->gpios[i] = gpio; + + if (gpio_is_valid(gpio)) { + /* Real CS - set the initial state. */ + ret = gpio_request(gpio, np->name); + if (ret < 0) { + dev_err(dev, "can't request gpio " + "#%d: %d\n", i, ret); + goto free_gpios; + } + + gpio_direction_output(gpio, + !!(flags & OF_GPIO_ACTIVE_LOW)); + } else if (gpio == -EEXIST) { + ; /* No CS, but that's OK. */ + } else { + dev_err(dev, "invalid gpio #%d: %d\n", i, gpio); + ret = -EINVAL; + goto free_gpios; + } + } + } + + /* Setup the state for the bitbang driver */ + bbp = &hw->bitbang; + bbp->master = hw->master; + bbp->setup_transfer = spi_ppc4xx_setupxfer; + bbp->chipselect = spi_ppc4xx_chipsel; + bbp->txrx_bufs = spi_ppc4xx_txrx; + bbp->use_dma = 0; + bbp->master->setup = spi_ppc4xx_setup; + bbp->master->cleanup = spi_ppc4xx_cleanup; + + /* Allocate bus num dynamically. */ + bbp->master->bus_num = -1; + + /* the spi->mode bits understood by this driver: */ + bbp->master->mode_bits = + SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST; + + /* this many pins in all GPIO controllers */ + bbp->master->num_chipselect = num_gpios; + + /* Get the clock for the OPB */ + opbnp = of_find_compatible_node(NULL, NULL, "ibm,opb"); + if (opbnp == NULL) { + dev_err(dev, "OPB: cannot find node\n"); + ret = -ENODEV; + goto free_gpios; + } + /* Get the clock (Hz) for the OPB */ + clk = of_get_property(opbnp, "clock-frequency", NULL); + if (clk == NULL) { + dev_err(dev, "OPB: no clock-frequency property set\n"); + of_node_put(opbnp); + ret = -ENODEV; + goto free_gpios; + } + hw->opb_freq = *clk; + hw->opb_freq >>= 2; + of_node_put(opbnp); + + ret = of_address_to_resource(np, 0, &resource); + if (ret) { + dev_err(dev, "error while parsing device node resource\n"); + goto free_gpios; + } + hw->mapbase = resource.start; + hw->mapsize = resource.end - resource.start + 1; + + /* Sanity check */ + if (hw->mapsize < sizeof(struct spi_ppc4xx_regs)) { + dev_err(dev, "too small to map registers\n"); + ret = -EINVAL; + goto free_gpios; + } + + /* Request IRQ */ + hw->irqnum = irq_of_parse_and_map(np, 0); + ret = request_irq(hw->irqnum, spi_ppc4xx_int, + IRQF_DISABLED, "spi_ppc4xx_of", (void *)hw); + if (ret) { + dev_err(dev, "unable to allocate interrupt\n"); + goto free_gpios; + } + + if (!request_mem_region(hw->mapbase, hw->mapsize, DRIVER_NAME)) { + dev_err(dev, "resource unavailable\n"); + ret = -EBUSY; + goto request_mem_error; + } + + hw->regs = ioremap(hw->mapbase, sizeof(struct spi_ppc4xx_regs)); + + if (!hw->regs) { + dev_err(dev, "unable to memory map registers\n"); + ret = -ENXIO; + goto map_io_error; + } + + spi_ppc4xx_enable(hw); + + /* Finally register our spi controller */ + dev->dma_mask = 0; + ret = spi_bitbang_start(bbp); + if (ret) { + dev_err(dev, "failed to register SPI master\n"); + goto unmap_regs; + } + + dev_info(dev, "driver initialized\n"); + + return 0; + +unmap_regs: + iounmap(hw->regs); +map_io_error: + release_mem_region(hw->mapbase, hw->mapsize); +request_mem_error: + free_irq(hw->irqnum, hw); +free_gpios: + free_gpios(hw); +free_master: + dev_set_drvdata(dev, NULL); + spi_master_put(master); + + dev_err(dev, "initialization failed\n"); + return ret; +} + +static int __exit spi_ppc4xx_of_remove(struct platform_device *op) +{ + struct spi_master *master = dev_get_drvdata(&op->dev); + struct ppc4xx_spi *hw = spi_master_get_devdata(master); + + spi_bitbang_stop(&hw->bitbang); + dev_set_drvdata(&op->dev, NULL); + release_mem_region(hw->mapbase, hw->mapsize); + free_irq(hw->irqnum, hw); + iounmap(hw->regs); + free_gpios(hw); + return 0; +} + +static const struct of_device_id spi_ppc4xx_of_match[] = { + { .compatible = "ibm,ppc4xx-spi", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, spi_ppc4xx_of_match); + +static struct platform_driver spi_ppc4xx_of_driver = { + .probe = spi_ppc4xx_of_probe, + .remove = __exit_p(spi_ppc4xx_of_remove), + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = spi_ppc4xx_of_match, + }, +}; + +static int __init spi_ppc4xx_init(void) +{ + return platform_driver_register(&spi_ppc4xx_of_driver); +} +module_init(spi_ppc4xx_init); + +static void __exit spi_ppc4xx_exit(void) +{ + platform_driver_unregister(&spi_ppc4xx_of_driver); +} +module_exit(spi_ppc4xx_exit); + +MODULE_AUTHOR("Gary Jennejohn & Stefan Roese"); +MODULE_DESCRIPTION("Simple PPC4xx SPI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c new file mode 100644 index 000000000000..378e504f89eb --- /dev/null +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -0,0 +1,180 @@ +/* + * CE4100's SPI device is more or less the same one as found on PXA + * + */ +#include +#include +#include +#include + +struct ce4100_info { + struct ssp_device ssp; + struct platform_device *spi_pdev; +}; + +static DEFINE_MUTEX(ssp_lock); +static LIST_HEAD(ssp_list); + +struct ssp_device *pxa_ssp_request(int port, const char *label) +{ + struct ssp_device *ssp = NULL; + + mutex_lock(&ssp_lock); + + list_for_each_entry(ssp, &ssp_list, node) { + if (ssp->port_id == port && ssp->use_count == 0) { + ssp->use_count++; + ssp->label = label; + break; + } + } + + mutex_unlock(&ssp_lock); + + if (&ssp->node == &ssp_list) + return NULL; + + return ssp; +} +EXPORT_SYMBOL_GPL(pxa_ssp_request); + +void pxa_ssp_free(struct ssp_device *ssp) +{ + mutex_lock(&ssp_lock); + if (ssp->use_count) { + ssp->use_count--; + ssp->label = NULL; + } else + dev_err(&ssp->pdev->dev, "device already free\n"); + mutex_unlock(&ssp_lock); +} +EXPORT_SYMBOL_GPL(pxa_ssp_free); + +static int __devinit ce4100_spi_probe(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + int ret; + resource_size_t phys_beg; + resource_size_t phys_len; + struct ce4100_info *spi_info; + struct platform_device *pdev; + struct pxa2xx_spi_master spi_pdata; + struct ssp_device *ssp; + + ret = pci_enable_device(dev); + if (ret) + return ret; + + phys_beg = pci_resource_start(dev, 0); + phys_len = pci_resource_len(dev, 0); + + if (!request_mem_region(phys_beg, phys_len, + "CE4100 SPI")) { + dev_err(&dev->dev, "Can't request register space.\n"); + ret = -EBUSY; + return ret; + } + + pdev = platform_device_alloc("pxa2xx-spi", dev->devfn); + spi_info = kzalloc(sizeof(*spi_info), GFP_KERNEL); + if (!pdev || !spi_info ) { + ret = -ENOMEM; + goto err_nomem; + } + memset(&spi_pdata, 0, sizeof(spi_pdata)); + spi_pdata.num_chipselect = dev->devfn; + + ret = platform_device_add_data(pdev, &spi_pdata, sizeof(spi_pdata)); + if (ret) + goto err_nomem; + + pdev->dev.parent = &dev->dev; + pdev->dev.of_node = dev->dev.of_node; + ssp = &spi_info->ssp; + ssp->phys_base = pci_resource_start(dev, 0); + ssp->mmio_base = ioremap(phys_beg, phys_len); + if (!ssp->mmio_base) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + ret = -EIO; + goto err_nomem; + } + ssp->irq = dev->irq; + ssp->port_id = pdev->id; + ssp->type = PXA25x_SSP; + + mutex_lock(&ssp_lock); + list_add(&ssp->node, &ssp_list); + mutex_unlock(&ssp_lock); + + pci_set_drvdata(dev, spi_info); + + ret = platform_device_add(pdev); + if (ret) + goto err_dev_add; + + return ret; + +err_dev_add: + pci_set_drvdata(dev, NULL); + mutex_lock(&ssp_lock); + list_del(&ssp->node); + mutex_unlock(&ssp_lock); + iounmap(ssp->mmio_base); + +err_nomem: + release_mem_region(phys_beg, phys_len); + platform_device_put(pdev); + kfree(spi_info); + return ret; +} + +static void __devexit ce4100_spi_remove(struct pci_dev *dev) +{ + struct ce4100_info *spi_info; + struct ssp_device *ssp; + + spi_info = pci_get_drvdata(dev); + ssp = &spi_info->ssp; + platform_device_unregister(spi_info->spi_pdev); + + iounmap(ssp->mmio_base); + release_mem_region(pci_resource_start(dev, 0), + pci_resource_len(dev, 0)); + + mutex_lock(&ssp_lock); + list_del(&ssp->node); + mutex_unlock(&ssp_lock); + + pci_set_drvdata(dev, NULL); + pci_disable_device(dev); + kfree(spi_info); +} + +static struct pci_device_id ce4100_spi_devices[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e6a) }, + { }, +}; +MODULE_DEVICE_TABLE(pci, ce4100_spi_devices); + +static struct pci_driver ce4100_spi_driver = { + .name = "ce4100_spi", + .id_table = ce4100_spi_devices, + .probe = ce4100_spi_probe, + .remove = __devexit_p(ce4100_spi_remove), +}; + +static int __init ce4100_spi_init(void) +{ + return pci_register_driver(&ce4100_spi_driver); +} +module_init(ce4100_spi_init); + +static void __exit ce4100_spi_exit(void) +{ + pci_unregister_driver(&ce4100_spi_driver); +} +module_exit(ce4100_spi_exit); + +MODULE_DESCRIPTION("CE4100 PCI-SPI glue code for PXA's driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sebastian Andrzej Siewior "); diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c new file mode 100644 index 000000000000..dc25bee8d33f --- /dev/null +++ b/drivers/spi/spi-pxa2xx.c @@ -0,0 +1,1816 @@ +/* + * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + + +MODULE_AUTHOR("Stephen Street"); +MODULE_DESCRIPTION("PXA2xx SSP SPI Controller"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa2xx-spi"); + +#define MAX_BUSES 3 + +#define TIMOUT_DFLT 1000 + +#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) +#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) +#define IS_DMA_ALIGNED(x) ((((u32)(x)) & 0x07) == 0) +#define MAX_DMA_LEN 8191 +#define DMA_ALIGNMENT 8 + +/* + * for testing SSCR1 changes that require SSP restart, basically + * everything except the service and interrupt enables, the pxa270 developer + * manual says only SSCR1_SCFR, SSCR1_SPH, SSCR1_SPO need to be in this + * list, but the PXA255 dev man says all bits without really meaning the + * service and interrupt enables + */ +#define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \ + | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \ + | SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \ + | SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \ + | SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \ + | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM) + +#define DEFINE_SSP_REG(reg, off) \ +static inline u32 read_##reg(void const __iomem *p) \ +{ return __raw_readl(p + (off)); } \ +\ +static inline void write_##reg(u32 v, void __iomem *p) \ +{ __raw_writel(v, p + (off)); } + +DEFINE_SSP_REG(SSCR0, 0x00) +DEFINE_SSP_REG(SSCR1, 0x04) +DEFINE_SSP_REG(SSSR, 0x08) +DEFINE_SSP_REG(SSITR, 0x0c) +DEFINE_SSP_REG(SSDR, 0x10) +DEFINE_SSP_REG(SSTO, 0x28) +DEFINE_SSP_REG(SSPSP, 0x2c) + +#define START_STATE ((void*)0) +#define RUNNING_STATE ((void*)1) +#define DONE_STATE ((void*)2) +#define ERROR_STATE ((void*)-1) + +#define QUEUE_RUNNING 0 +#define QUEUE_STOPPED 1 + +struct driver_data { + /* Driver model hookup */ + struct platform_device *pdev; + + /* SSP Info */ + struct ssp_device *ssp; + + /* SPI framework hookup */ + enum pxa_ssp_type ssp_type; + struct spi_master *master; + + /* PXA hookup */ + struct pxa2xx_spi_master *master_info; + + /* DMA setup stuff */ + int rx_channel; + int tx_channel; + u32 *null_dma_buf; + + /* SSP register addresses */ + void __iomem *ioaddr; + u32 ssdr_physical; + + /* SSP masks*/ + u32 dma_cr1; + u32 int_cr1; + u32 clear_sr; + u32 mask_sr; + + /* Driver message queue */ + struct workqueue_struct *workqueue; + struct work_struct pump_messages; + spinlock_t lock; + struct list_head queue; + int busy; + int run; + + /* Message Transfer pump */ + struct tasklet_struct pump_transfers; + + /* Current message transfer state info */ + struct spi_message* cur_msg; + struct spi_transfer* cur_transfer; + struct chip_data *cur_chip; + size_t len; + void *tx; + void *tx_end; + void *rx; + void *rx_end; + int dma_mapped; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + size_t rx_map_len; + size_t tx_map_len; + u8 n_bytes; + u32 dma_width; + int (*write)(struct driver_data *drv_data); + int (*read)(struct driver_data *drv_data); + irqreturn_t (*transfer_handler)(struct driver_data *drv_data); + void (*cs_control)(u32 command); +}; + +struct chip_data { + u32 cr0; + u32 cr1; + u32 psp; + u32 timeout; + u8 n_bytes; + u32 dma_width; + u32 dma_burst_size; + u32 threshold; + u32 dma_threshold; + u8 enable_dma; + u8 bits_per_word; + u32 speed_hz; + union { + int gpio_cs; + unsigned int frm; + }; + int gpio_cs_inverted; + int (*write)(struct driver_data *drv_data); + int (*read)(struct driver_data *drv_data); + void (*cs_control)(u32 command); +}; + +static void pump_messages(struct work_struct *work); + +static void cs_assert(struct driver_data *drv_data) +{ + struct chip_data *chip = drv_data->cur_chip; + + if (drv_data->ssp_type == CE4100_SSP) { + write_SSSR(drv_data->cur_chip->frm, drv_data->ioaddr); + return; + } + + if (chip->cs_control) { + chip->cs_control(PXA2XX_CS_ASSERT); + return; + } + + if (gpio_is_valid(chip->gpio_cs)) + gpio_set_value(chip->gpio_cs, chip->gpio_cs_inverted); +} + +static void cs_deassert(struct driver_data *drv_data) +{ + struct chip_data *chip = drv_data->cur_chip; + + if (drv_data->ssp_type == CE4100_SSP) + return; + + if (chip->cs_control) { + chip->cs_control(PXA2XX_CS_DEASSERT); + return; + } + + if (gpio_is_valid(chip->gpio_cs)) + gpio_set_value(chip->gpio_cs, !chip->gpio_cs_inverted); +} + +static void write_SSSR_CS(struct driver_data *drv_data, u32 val) +{ + void __iomem *reg = drv_data->ioaddr; + + if (drv_data->ssp_type == CE4100_SSP) + val |= read_SSSR(reg) & SSSR_ALT_FRM_MASK; + + write_SSSR(val, reg); +} + +static int pxa25x_ssp_comp(struct driver_data *drv_data) +{ + if (drv_data->ssp_type == PXA25x_SSP) + return 1; + if (drv_data->ssp_type == CE4100_SSP) + return 1; + return 0; +} + +static int flush(struct driver_data *drv_data) +{ + unsigned long limit = loops_per_jiffy << 1; + + void __iomem *reg = drv_data->ioaddr; + + do { + while (read_SSSR(reg) & SSSR_RNE) { + read_SSDR(reg); + } + } while ((read_SSSR(reg) & SSSR_BSY) && --limit); + write_SSSR_CS(drv_data, SSSR_ROR); + + return limit; +} + +static int null_writer(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + u8 n_bytes = drv_data->n_bytes; + + if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) + || (drv_data->tx == drv_data->tx_end)) + return 0; + + write_SSDR(0, reg); + drv_data->tx += n_bytes; + + return 1; +} + +static int null_reader(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + u8 n_bytes = drv_data->n_bytes; + + while ((read_SSSR(reg) & SSSR_RNE) + && (drv_data->rx < drv_data->rx_end)) { + read_SSDR(reg); + drv_data->rx += n_bytes; + } + + return drv_data->rx == drv_data->rx_end; +} + +static int u8_writer(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + + if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) + || (drv_data->tx == drv_data->tx_end)) + return 0; + + write_SSDR(*(u8 *)(drv_data->tx), reg); + ++drv_data->tx; + + return 1; +} + +static int u8_reader(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + + while ((read_SSSR(reg) & SSSR_RNE) + && (drv_data->rx < drv_data->rx_end)) { + *(u8 *)(drv_data->rx) = read_SSDR(reg); + ++drv_data->rx; + } + + return drv_data->rx == drv_data->rx_end; +} + +static int u16_writer(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + + if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) + || (drv_data->tx == drv_data->tx_end)) + return 0; + + write_SSDR(*(u16 *)(drv_data->tx), reg); + drv_data->tx += 2; + + return 1; +} + +static int u16_reader(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + + while ((read_SSSR(reg) & SSSR_RNE) + && (drv_data->rx < drv_data->rx_end)) { + *(u16 *)(drv_data->rx) = read_SSDR(reg); + drv_data->rx += 2; + } + + return drv_data->rx == drv_data->rx_end; +} + +static int u32_writer(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + + if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) + || (drv_data->tx == drv_data->tx_end)) + return 0; + + write_SSDR(*(u32 *)(drv_data->tx), reg); + drv_data->tx += 4; + + return 1; +} + +static int u32_reader(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + + while ((read_SSSR(reg) & SSSR_RNE) + && (drv_data->rx < drv_data->rx_end)) { + *(u32 *)(drv_data->rx) = read_SSDR(reg); + drv_data->rx += 4; + } + + return drv_data->rx == drv_data->rx_end; +} + +static void *next_transfer(struct driver_data *drv_data) +{ + struct spi_message *msg = drv_data->cur_msg; + struct spi_transfer *trans = drv_data->cur_transfer; + + /* Move to next transfer */ + if (trans->transfer_list.next != &msg->transfers) { + drv_data->cur_transfer = + list_entry(trans->transfer_list.next, + struct spi_transfer, + transfer_list); + return RUNNING_STATE; + } else + return DONE_STATE; +} + +static int map_dma_buffers(struct driver_data *drv_data) +{ + struct spi_message *msg = drv_data->cur_msg; + struct device *dev = &msg->spi->dev; + + if (!drv_data->cur_chip->enable_dma) + return 0; + + if (msg->is_dma_mapped) + return drv_data->rx_dma && drv_data->tx_dma; + + if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx)) + return 0; + + /* Modify setup if rx buffer is null */ + if (drv_data->rx == NULL) { + *drv_data->null_dma_buf = 0; + drv_data->rx = drv_data->null_dma_buf; + drv_data->rx_map_len = 4; + } else + drv_data->rx_map_len = drv_data->len; + + + /* Modify setup if tx buffer is null */ + if (drv_data->tx == NULL) { + *drv_data->null_dma_buf = 0; + drv_data->tx = drv_data->null_dma_buf; + drv_data->tx_map_len = 4; + } else + drv_data->tx_map_len = drv_data->len; + + /* Stream map the tx buffer. Always do DMA_TO_DEVICE first + * so we flush the cache *before* invalidating it, in case + * the tx and rx buffers overlap. + */ + drv_data->tx_dma = dma_map_single(dev, drv_data->tx, + drv_data->tx_map_len, DMA_TO_DEVICE); + if (dma_mapping_error(dev, drv_data->tx_dma)) + return 0; + + /* Stream map the rx buffer */ + drv_data->rx_dma = dma_map_single(dev, drv_data->rx, + drv_data->rx_map_len, DMA_FROM_DEVICE); + if (dma_mapping_error(dev, drv_data->rx_dma)) { + dma_unmap_single(dev, drv_data->tx_dma, + drv_data->tx_map_len, DMA_TO_DEVICE); + return 0; + } + + return 1; +} + +static void unmap_dma_buffers(struct driver_data *drv_data) +{ + struct device *dev; + + if (!drv_data->dma_mapped) + return; + + if (!drv_data->cur_msg->is_dma_mapped) { + dev = &drv_data->cur_msg->spi->dev; + dma_unmap_single(dev, drv_data->rx_dma, + drv_data->rx_map_len, DMA_FROM_DEVICE); + dma_unmap_single(dev, drv_data->tx_dma, + drv_data->tx_map_len, DMA_TO_DEVICE); + } + + drv_data->dma_mapped = 0; +} + +/* caller already set message->status; dma and pio irqs are blocked */ +static void giveback(struct driver_data *drv_data) +{ + struct spi_transfer* last_transfer; + unsigned long flags; + struct spi_message *msg; + + spin_lock_irqsave(&drv_data->lock, flags); + msg = drv_data->cur_msg; + drv_data->cur_msg = NULL; + drv_data->cur_transfer = NULL; + queue_work(drv_data->workqueue, &drv_data->pump_messages); + spin_unlock_irqrestore(&drv_data->lock, flags); + + last_transfer = list_entry(msg->transfers.prev, + struct spi_transfer, + transfer_list); + + /* Delay if requested before any change in chip select */ + if (last_transfer->delay_usecs) + udelay(last_transfer->delay_usecs); + + /* Drop chip select UNLESS cs_change is true or we are returning + * a message with an error, or next message is for another chip + */ + if (!last_transfer->cs_change) + cs_deassert(drv_data); + else { + struct spi_message *next_msg; + + /* Holding of cs was hinted, but we need to make sure + * the next message is for the same chip. Don't waste + * time with the following tests unless this was hinted. + * + * We cannot postpone this until pump_messages, because + * after calling msg->complete (below) the driver that + * sent the current message could be unloaded, which + * could invalidate the cs_control() callback... + */ + + /* get a pointer to the next message, if any */ + spin_lock_irqsave(&drv_data->lock, flags); + if (list_empty(&drv_data->queue)) + next_msg = NULL; + else + next_msg = list_entry(drv_data->queue.next, + struct spi_message, queue); + spin_unlock_irqrestore(&drv_data->lock, flags); + + /* see if the next and current messages point + * to the same chip + */ + if (next_msg && next_msg->spi != msg->spi) + next_msg = NULL; + if (!next_msg || msg->state == ERROR_STATE) + cs_deassert(drv_data); + } + + msg->state = NULL; + if (msg->complete) + msg->complete(msg->context); + + drv_data->cur_chip = NULL; +} + +static int wait_ssp_rx_stall(void const __iomem *ioaddr) +{ + unsigned long limit = loops_per_jiffy << 1; + + while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit) + cpu_relax(); + + return limit; +} + +static int wait_dma_channel_stop(int channel) +{ + unsigned long limit = loops_per_jiffy << 1; + + while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit) + cpu_relax(); + + return limit; +} + +static void dma_error_stop(struct driver_data *drv_data, const char *msg) +{ + void __iomem *reg = drv_data->ioaddr; + + /* Stop and reset */ + DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; + DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; + write_SSSR_CS(drv_data, drv_data->clear_sr); + write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); + if (!pxa25x_ssp_comp(drv_data)) + write_SSTO(0, reg); + flush(drv_data); + write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); + + unmap_dma_buffers(drv_data); + + dev_err(&drv_data->pdev->dev, "%s\n", msg); + + drv_data->cur_msg->state = ERROR_STATE; + tasklet_schedule(&drv_data->pump_transfers); +} + +static void dma_transfer_complete(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + struct spi_message *msg = drv_data->cur_msg; + + /* Clear and disable interrupts on SSP and DMA channels*/ + write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); + write_SSSR_CS(drv_data, drv_data->clear_sr); + DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; + DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; + + if (wait_dma_channel_stop(drv_data->rx_channel) == 0) + dev_err(&drv_data->pdev->dev, + "dma_handler: dma rx channel stop failed\n"); + + if (wait_ssp_rx_stall(drv_data->ioaddr) == 0) + dev_err(&drv_data->pdev->dev, + "dma_transfer: ssp rx stall failed\n"); + + unmap_dma_buffers(drv_data); + + /* update the buffer pointer for the amount completed in dma */ + drv_data->rx += drv_data->len - + (DCMD(drv_data->rx_channel) & DCMD_LENGTH); + + /* read trailing data from fifo, it does not matter how many + * bytes are in the fifo just read until buffer is full + * or fifo is empty, which ever occurs first */ + drv_data->read(drv_data); + + /* return count of what was actually read */ + msg->actual_length += drv_data->len - + (drv_data->rx_end - drv_data->rx); + + /* Transfer delays and chip select release are + * handled in pump_transfers or giveback + */ + + /* Move to next transfer */ + msg->state = next_transfer(drv_data); + + /* Schedule transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); +} + +static void dma_handler(int channel, void *data) +{ + struct driver_data *drv_data = data; + u32 irq_status = DCSR(channel) & DMA_INT_MASK; + + if (irq_status & DCSR_BUSERR) { + + if (channel == drv_data->tx_channel) + dma_error_stop(drv_data, + "dma_handler: " + "bad bus address on tx channel"); + else + dma_error_stop(drv_data, + "dma_handler: " + "bad bus address on rx channel"); + return; + } + + /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */ + if ((channel == drv_data->tx_channel) + && (irq_status & DCSR_ENDINTR) + && (drv_data->ssp_type == PXA25x_SSP)) { + + /* Wait for rx to stall */ + if (wait_ssp_rx_stall(drv_data->ioaddr) == 0) + dev_err(&drv_data->pdev->dev, + "dma_handler: ssp rx stall failed\n"); + + /* finish this transfer, start the next */ + dma_transfer_complete(drv_data); + } +} + +static irqreturn_t dma_transfer(struct driver_data *drv_data) +{ + u32 irq_status; + void __iomem *reg = drv_data->ioaddr; + + irq_status = read_SSSR(reg) & drv_data->mask_sr; + if (irq_status & SSSR_ROR) { + dma_error_stop(drv_data, "dma_transfer: fifo overrun"); + return IRQ_HANDLED; + } + + /* Check for false positive timeout */ + if ((irq_status & SSSR_TINT) + && (DCSR(drv_data->tx_channel) & DCSR_RUN)) { + write_SSSR(SSSR_TINT, reg); + return IRQ_HANDLED; + } + + if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) { + + /* Clear and disable timeout interrupt, do the rest in + * dma_transfer_complete */ + if (!pxa25x_ssp_comp(drv_data)) + write_SSTO(0, reg); + + /* finish this transfer, start the next */ + dma_transfer_complete(drv_data); + + return IRQ_HANDLED; + } + + /* Opps problem detected */ + return IRQ_NONE; +} + +static void reset_sccr1(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + struct chip_data *chip = drv_data->cur_chip; + u32 sccr1_reg; + + sccr1_reg = read_SSCR1(reg) & ~drv_data->int_cr1; + sccr1_reg &= ~SSCR1_RFT; + sccr1_reg |= chip->threshold; + write_SSCR1(sccr1_reg, reg); +} + +static void int_error_stop(struct driver_data *drv_data, const char* msg) +{ + void __iomem *reg = drv_data->ioaddr; + + /* Stop and reset SSP */ + write_SSSR_CS(drv_data, drv_data->clear_sr); + reset_sccr1(drv_data); + if (!pxa25x_ssp_comp(drv_data)) + write_SSTO(0, reg); + flush(drv_data); + write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); + + dev_err(&drv_data->pdev->dev, "%s\n", msg); + + drv_data->cur_msg->state = ERROR_STATE; + tasklet_schedule(&drv_data->pump_transfers); +} + +static void int_transfer_complete(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + + /* Stop SSP */ + write_SSSR_CS(drv_data, drv_data->clear_sr); + reset_sccr1(drv_data); + if (!pxa25x_ssp_comp(drv_data)) + write_SSTO(0, reg); + + /* Update total byte transferred return count actual bytes read */ + drv_data->cur_msg->actual_length += drv_data->len - + (drv_data->rx_end - drv_data->rx); + + /* Transfer delays and chip select release are + * handled in pump_transfers or giveback + */ + + /* Move to next transfer */ + drv_data->cur_msg->state = next_transfer(drv_data); + + /* Schedule transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); +} + +static irqreturn_t interrupt_transfer(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + + u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ? + drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS; + + u32 irq_status = read_SSSR(reg) & irq_mask; + + if (irq_status & SSSR_ROR) { + int_error_stop(drv_data, "interrupt_transfer: fifo overrun"); + return IRQ_HANDLED; + } + + if (irq_status & SSSR_TINT) { + write_SSSR(SSSR_TINT, reg); + if (drv_data->read(drv_data)) { + int_transfer_complete(drv_data); + return IRQ_HANDLED; + } + } + + /* Drain rx fifo, Fill tx fifo and prevent overruns */ + do { + if (drv_data->read(drv_data)) { + int_transfer_complete(drv_data); + return IRQ_HANDLED; + } + } while (drv_data->write(drv_data)); + + if (drv_data->read(drv_data)) { + int_transfer_complete(drv_data); + return IRQ_HANDLED; + } + + if (drv_data->tx == drv_data->tx_end) { + u32 bytes_left; + u32 sccr1_reg; + + sccr1_reg = read_SSCR1(reg); + sccr1_reg &= ~SSCR1_TIE; + + /* + * PXA25x_SSP has no timeout, set up rx threshould for the + * remaining RX bytes. + */ + if (pxa25x_ssp_comp(drv_data)) { + + sccr1_reg &= ~SSCR1_RFT; + + bytes_left = drv_data->rx_end - drv_data->rx; + switch (drv_data->n_bytes) { + case 4: + bytes_left >>= 1; + case 2: + bytes_left >>= 1; + } + + if (bytes_left > RX_THRESH_DFLT) + bytes_left = RX_THRESH_DFLT; + + sccr1_reg |= SSCR1_RxTresh(bytes_left); + } + write_SSCR1(sccr1_reg, reg); + } + + /* We did something */ + return IRQ_HANDLED; +} + +static irqreturn_t ssp_int(int irq, void *dev_id) +{ + struct driver_data *drv_data = dev_id; + void __iomem *reg = drv_data->ioaddr; + u32 sccr1_reg = read_SSCR1(reg); + u32 mask = drv_data->mask_sr; + u32 status; + + status = read_SSSR(reg); + + /* Ignore possible writes if we don't need to write */ + if (!(sccr1_reg & SSCR1_TIE)) + mask &= ~SSSR_TFS; + + if (!(status & mask)) + return IRQ_NONE; + + if (!drv_data->cur_msg) { + + write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); + write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg); + if (!pxa25x_ssp_comp(drv_data)) + write_SSTO(0, reg); + write_SSSR_CS(drv_data, drv_data->clear_sr); + + dev_err(&drv_data->pdev->dev, "bad message state " + "in interrupt handler\n"); + + /* Never fail */ + return IRQ_HANDLED; + } + + return drv_data->transfer_handler(drv_data); +} + +static int set_dma_burst_and_threshold(struct chip_data *chip, + struct spi_device *spi, + u8 bits_per_word, u32 *burst_code, + u32 *threshold) +{ + struct pxa2xx_spi_chip *chip_info = + (struct pxa2xx_spi_chip *)spi->controller_data; + int bytes_per_word; + int burst_bytes; + int thresh_words; + int req_burst_size; + int retval = 0; + + /* Set the threshold (in registers) to equal the same amount of data + * as represented by burst size (in bytes). The computation below + * is (burst_size rounded up to nearest 8 byte, word or long word) + * divided by (bytes/register); the tx threshold is the inverse of + * the rx, so that there will always be enough data in the rx fifo + * to satisfy a burst, and there will always be enough space in the + * tx fifo to accept a burst (a tx burst will overwrite the fifo if + * there is not enough space), there must always remain enough empty + * space in the rx fifo for any data loaded to the tx fifo. + * Whenever burst_size (in bytes) equals bits/word, the fifo threshold + * will be 8, or half the fifo; + * The threshold can only be set to 2, 4 or 8, but not 16, because + * to burst 16 to the tx fifo, the fifo would have to be empty; + * however, the minimum fifo trigger level is 1, and the tx will + * request service when the fifo is at this level, with only 15 spaces. + */ + + /* find bytes/word */ + if (bits_per_word <= 8) + bytes_per_word = 1; + else if (bits_per_word <= 16) + bytes_per_word = 2; + else + bytes_per_word = 4; + + /* use struct pxa2xx_spi_chip->dma_burst_size if available */ + if (chip_info) + req_burst_size = chip_info->dma_burst_size; + else { + switch (chip->dma_burst_size) { + default: + /* if the default burst size is not set, + * do it now */ + chip->dma_burst_size = DCMD_BURST8; + case DCMD_BURST8: + req_burst_size = 8; + break; + case DCMD_BURST16: + req_burst_size = 16; + break; + case DCMD_BURST32: + req_burst_size = 32; + break; + } + } + if (req_burst_size <= 8) { + *burst_code = DCMD_BURST8; + burst_bytes = 8; + } else if (req_burst_size <= 16) { + if (bytes_per_word == 1) { + /* don't burst more than 1/2 the fifo */ + *burst_code = DCMD_BURST8; + burst_bytes = 8; + retval = 1; + } else { + *burst_code = DCMD_BURST16; + burst_bytes = 16; + } + } else { + if (bytes_per_word == 1) { + /* don't burst more than 1/2 the fifo */ + *burst_code = DCMD_BURST8; + burst_bytes = 8; + retval = 1; + } else if (bytes_per_word == 2) { + /* don't burst more than 1/2 the fifo */ + *burst_code = DCMD_BURST16; + burst_bytes = 16; + retval = 1; + } else { + *burst_code = DCMD_BURST32; + burst_bytes = 32; + } + } + + thresh_words = burst_bytes / bytes_per_word; + + /* thresh_words will be between 2 and 8 */ + *threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT) + | (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT); + + return retval; +} + +static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate) +{ + unsigned long ssp_clk = clk_get_rate(ssp->clk); + + if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP) + return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8; + else + return ((ssp_clk / rate - 1) & 0xfff) << 8; +} + +static void pump_transfers(unsigned long data) +{ + struct driver_data *drv_data = (struct driver_data *)data; + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + struct chip_data *chip = NULL; + struct ssp_device *ssp = drv_data->ssp; + void __iomem *reg = drv_data->ioaddr; + u32 clk_div = 0; + u8 bits = 0; + u32 speed = 0; + u32 cr0; + u32 cr1; + u32 dma_thresh = drv_data->cur_chip->dma_threshold; + u32 dma_burst = drv_data->cur_chip->dma_burst_size; + + /* Get current state information */ + message = drv_data->cur_msg; + transfer = drv_data->cur_transfer; + chip = drv_data->cur_chip; + + /* Handle for abort */ + if (message->state == ERROR_STATE) { + message->status = -EIO; + giveback(drv_data); + return; + } + + /* Handle end of message */ + if (message->state == DONE_STATE) { + message->status = 0; + giveback(drv_data); + return; + } + + /* Delay if requested at end of transfer before CS change */ + if (message->state == RUNNING_STATE) { + previous = list_entry(transfer->transfer_list.prev, + struct spi_transfer, + transfer_list); + if (previous->delay_usecs) + udelay(previous->delay_usecs); + + /* Drop chip select only if cs_change is requested */ + if (previous->cs_change) + cs_deassert(drv_data); + } + + /* Check for transfers that need multiple DMA segments */ + if (transfer->len > MAX_DMA_LEN && chip->enable_dma) { + + /* reject already-mapped transfers; PIO won't always work */ + if (message->is_dma_mapped + || transfer->rx_dma || transfer->tx_dma) { + dev_err(&drv_data->pdev->dev, + "pump_transfers: mapped transfer length " + "of %u is greater than %d\n", + transfer->len, MAX_DMA_LEN); + message->status = -EINVAL; + giveback(drv_data); + return; + } + + /* warn ... we force this to PIO mode */ + if (printk_ratelimit()) + dev_warn(&message->spi->dev, "pump_transfers: " + "DMA disabled for transfer length %ld " + "greater than %d\n", + (long)drv_data->len, MAX_DMA_LEN); + } + + /* Setup the transfer state based on the type of transfer */ + if (flush(drv_data) == 0) { + dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); + message->status = -EIO; + giveback(drv_data); + return; + } + drv_data->n_bytes = chip->n_bytes; + drv_data->dma_width = chip->dma_width; + drv_data->tx = (void *)transfer->tx_buf; + drv_data->tx_end = drv_data->tx + transfer->len; + drv_data->rx = transfer->rx_buf; + drv_data->rx_end = drv_data->rx + transfer->len; + drv_data->rx_dma = transfer->rx_dma; + drv_data->tx_dma = transfer->tx_dma; + drv_data->len = transfer->len & DCMD_LENGTH; + drv_data->write = drv_data->tx ? chip->write : null_writer; + drv_data->read = drv_data->rx ? chip->read : null_reader; + + /* Change speed and bit per word on a per transfer */ + cr0 = chip->cr0; + if (transfer->speed_hz || transfer->bits_per_word) { + + bits = chip->bits_per_word; + speed = chip->speed_hz; + + if (transfer->speed_hz) + speed = transfer->speed_hz; + + if (transfer->bits_per_word) + bits = transfer->bits_per_word; + + clk_div = ssp_get_clk_div(ssp, speed); + + if (bits <= 8) { + drv_data->n_bytes = 1; + drv_data->dma_width = DCMD_WIDTH1; + drv_data->read = drv_data->read != null_reader ? + u8_reader : null_reader; + drv_data->write = drv_data->write != null_writer ? + u8_writer : null_writer; + } else if (bits <= 16) { + drv_data->n_bytes = 2; + drv_data->dma_width = DCMD_WIDTH2; + drv_data->read = drv_data->read != null_reader ? + u16_reader : null_reader; + drv_data->write = drv_data->write != null_writer ? + u16_writer : null_writer; + } else if (bits <= 32) { + drv_data->n_bytes = 4; + drv_data->dma_width = DCMD_WIDTH4; + drv_data->read = drv_data->read != null_reader ? + u32_reader : null_reader; + drv_data->write = drv_data->write != null_writer ? + u32_writer : null_writer; + } + /* if bits/word is changed in dma mode, then must check the + * thresholds and burst also */ + if (chip->enable_dma) { + if (set_dma_burst_and_threshold(chip, message->spi, + bits, &dma_burst, + &dma_thresh)) + if (printk_ratelimit()) + dev_warn(&message->spi->dev, + "pump_transfers: " + "DMA burst size reduced to " + "match bits_per_word\n"); + } + + cr0 = clk_div + | SSCR0_Motorola + | SSCR0_DataSize(bits > 16 ? bits - 16 : bits) + | SSCR0_SSE + | (bits > 16 ? SSCR0_EDSS : 0); + } + + message->state = RUNNING_STATE; + + /* Try to map dma buffer and do a dma transfer if successful, but + * only if the length is non-zero and less than MAX_DMA_LEN. + * + * Zero-length non-descriptor DMA is illegal on PXA2xx; force use + * of PIO instead. Care is needed above because the transfer may + * have have been passed with buffers that are already dma mapped. + * A zero-length transfer in PIO mode will not try to write/read + * to/from the buffers + * + * REVISIT large transfers are exactly where we most want to be + * using DMA. If this happens much, split those transfers into + * multiple DMA segments rather than forcing PIO. + */ + drv_data->dma_mapped = 0; + if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN) + drv_data->dma_mapped = map_dma_buffers(drv_data); + if (drv_data->dma_mapped) { + + /* Ensure we have the correct interrupt handler */ + drv_data->transfer_handler = dma_transfer; + + /* Setup rx DMA Channel */ + DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; + DSADR(drv_data->rx_channel) = drv_data->ssdr_physical; + DTADR(drv_data->rx_channel) = drv_data->rx_dma; + if (drv_data->rx == drv_data->null_dma_buf) + /* No target address increment */ + DCMD(drv_data->rx_channel) = DCMD_FLOWSRC + | drv_data->dma_width + | dma_burst + | drv_data->len; + else + DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR + | DCMD_FLOWSRC + | drv_data->dma_width + | dma_burst + | drv_data->len; + + /* Setup tx DMA Channel */ + DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; + DSADR(drv_data->tx_channel) = drv_data->tx_dma; + DTADR(drv_data->tx_channel) = drv_data->ssdr_physical; + if (drv_data->tx == drv_data->null_dma_buf) + /* No source address increment */ + DCMD(drv_data->tx_channel) = DCMD_FLOWTRG + | drv_data->dma_width + | dma_burst + | drv_data->len; + else + DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR + | DCMD_FLOWTRG + | drv_data->dma_width + | dma_burst + | drv_data->len; + + /* Enable dma end irqs on SSP to detect end of transfer */ + if (drv_data->ssp_type == PXA25x_SSP) + DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN; + + /* Clear status and start DMA engine */ + cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1; + write_SSSR(drv_data->clear_sr, reg); + DCSR(drv_data->rx_channel) |= DCSR_RUN; + DCSR(drv_data->tx_channel) |= DCSR_RUN; + } else { + /* Ensure we have the correct interrupt handler */ + drv_data->transfer_handler = interrupt_transfer; + + /* Clear status */ + cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1; + write_SSSR_CS(drv_data, drv_data->clear_sr); + } + + /* see if we need to reload the config registers */ + if ((read_SSCR0(reg) != cr0) + || (read_SSCR1(reg) & SSCR1_CHANGE_MASK) != + (cr1 & SSCR1_CHANGE_MASK)) { + + /* stop the SSP, and update the other bits */ + write_SSCR0(cr0 & ~SSCR0_SSE, reg); + if (!pxa25x_ssp_comp(drv_data)) + write_SSTO(chip->timeout, reg); + /* first set CR1 without interrupt and service enables */ + write_SSCR1(cr1 & SSCR1_CHANGE_MASK, reg); + /* restart the SSP */ + write_SSCR0(cr0, reg); + + } else { + if (!pxa25x_ssp_comp(drv_data)) + write_SSTO(chip->timeout, reg); + } + + cs_assert(drv_data); + + /* after chip select, release the data by enabling service + * requests and interrupts, without changing any mode bits */ + write_SSCR1(cr1, reg); +} + +static void pump_messages(struct work_struct *work) +{ + struct driver_data *drv_data = + container_of(work, struct driver_data, pump_messages); + unsigned long flags; + + /* Lock queue and check for queue work */ + spin_lock_irqsave(&drv_data->lock, flags); + if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) { + drv_data->busy = 0; + spin_unlock_irqrestore(&drv_data->lock, flags); + return; + } + + /* Make sure we are not already running a message */ + if (drv_data->cur_msg) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return; + } + + /* Extract head of queue */ + drv_data->cur_msg = list_entry(drv_data->queue.next, + struct spi_message, queue); + list_del_init(&drv_data->cur_msg->queue); + + /* Initial message state*/ + drv_data->cur_msg->state = START_STATE; + drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, + struct spi_transfer, + transfer_list); + + /* prepare to setup the SSP, in pump_transfers, using the per + * chip configuration */ + drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); + + /* Mark as busy and launch transfers */ + tasklet_schedule(&drv_data->pump_transfers); + + drv_data->busy = 1; + spin_unlock_irqrestore(&drv_data->lock, flags); +} + +static int transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct driver_data *drv_data = spi_master_get_devdata(spi->master); + unsigned long flags; + + spin_lock_irqsave(&drv_data->lock, flags); + + if (drv_data->run == QUEUE_STOPPED) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return -ESHUTDOWN; + } + + msg->actual_length = 0; + msg->status = -EINPROGRESS; + msg->state = START_STATE; + + list_add_tail(&msg->queue, &drv_data->queue); + + if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) + queue_work(drv_data->workqueue, &drv_data->pump_messages); + + spin_unlock_irqrestore(&drv_data->lock, flags); + + return 0; +} + +static int setup_cs(struct spi_device *spi, struct chip_data *chip, + struct pxa2xx_spi_chip *chip_info) +{ + int err = 0; + + if (chip == NULL || chip_info == NULL) + return 0; + + /* NOTE: setup() can be called multiple times, possibly with + * different chip_info, release previously requested GPIO + */ + if (gpio_is_valid(chip->gpio_cs)) + gpio_free(chip->gpio_cs); + + /* If (*cs_control) is provided, ignore GPIO chip select */ + if (chip_info->cs_control) { + chip->cs_control = chip_info->cs_control; + return 0; + } + + if (gpio_is_valid(chip_info->gpio_cs)) { + err = gpio_request(chip_info->gpio_cs, "SPI_CS"); + if (err) { + dev_err(&spi->dev, "failed to request chip select " + "GPIO%d\n", chip_info->gpio_cs); + return err; + } + + chip->gpio_cs = chip_info->gpio_cs; + chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH; + + err = gpio_direction_output(chip->gpio_cs, + !chip->gpio_cs_inverted); + } + + return err; +} + +static int setup(struct spi_device *spi) +{ + struct pxa2xx_spi_chip *chip_info = NULL; + struct chip_data *chip; + struct driver_data *drv_data = spi_master_get_devdata(spi->master); + struct ssp_device *ssp = drv_data->ssp; + unsigned int clk_div; + uint tx_thres = TX_THRESH_DFLT; + uint rx_thres = RX_THRESH_DFLT; + + if (!pxa25x_ssp_comp(drv_data) + && (spi->bits_per_word < 4 || spi->bits_per_word > 32)) { + dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d " + "b/w not 4-32 for type non-PXA25x_SSP\n", + drv_data->ssp_type, spi->bits_per_word); + return -EINVAL; + } else if (pxa25x_ssp_comp(drv_data) + && (spi->bits_per_word < 4 + || spi->bits_per_word > 16)) { + dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d " + "b/w not 4-16 for type PXA25x_SSP\n", + drv_data->ssp_type, spi->bits_per_word); + return -EINVAL; + } + + /* Only alloc on first setup */ + chip = spi_get_ctldata(spi); + if (!chip) { + chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); + if (!chip) { + dev_err(&spi->dev, + "failed setup: can't allocate chip data\n"); + return -ENOMEM; + } + + if (drv_data->ssp_type == CE4100_SSP) { + if (spi->chip_select > 4) { + dev_err(&spi->dev, "failed setup: " + "cs number must not be > 4.\n"); + kfree(chip); + return -EINVAL; + } + + chip->frm = spi->chip_select; + } else + chip->gpio_cs = -1; + chip->enable_dma = 0; + chip->timeout = TIMOUT_DFLT; + chip->dma_burst_size = drv_data->master_info->enable_dma ? + DCMD_BURST8 : 0; + } + + /* protocol drivers may change the chip settings, so... + * if chip_info exists, use it */ + chip_info = spi->controller_data; + + /* chip_info isn't always needed */ + chip->cr1 = 0; + if (chip_info) { + if (chip_info->timeout) + chip->timeout = chip_info->timeout; + if (chip_info->tx_threshold) + tx_thres = chip_info->tx_threshold; + if (chip_info->rx_threshold) + rx_thres = chip_info->rx_threshold; + chip->enable_dma = drv_data->master_info->enable_dma; + chip->dma_threshold = 0; + if (chip_info->enable_loopback) + chip->cr1 = SSCR1_LBM; + } + + chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) | + (SSCR1_TxTresh(tx_thres) & SSCR1_TFT); + + /* set dma burst and threshold outside of chip_info path so that if + * chip_info goes away after setting chip->enable_dma, the + * burst and threshold can still respond to changes in bits_per_word */ + if (chip->enable_dma) { + /* set up legal burst and threshold for dma */ + if (set_dma_burst_and_threshold(chip, spi, spi->bits_per_word, + &chip->dma_burst_size, + &chip->dma_threshold)) { + dev_warn(&spi->dev, "in setup: DMA burst size reduced " + "to match bits_per_word\n"); + } + } + + clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz); + chip->speed_hz = spi->max_speed_hz; + + chip->cr0 = clk_div + | SSCR0_Motorola + | SSCR0_DataSize(spi->bits_per_word > 16 ? + spi->bits_per_word - 16 : spi->bits_per_word) + | SSCR0_SSE + | (spi->bits_per_word > 16 ? SSCR0_EDSS : 0); + chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH); + chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0) + | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0); + + /* NOTE: PXA25x_SSP _could_ use external clocking ... */ + if (!pxa25x_ssp_comp(drv_data)) + dev_dbg(&spi->dev, "%ld Hz actual, %s\n", + clk_get_rate(ssp->clk) + / (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)), + chip->enable_dma ? "DMA" : "PIO"); + else + dev_dbg(&spi->dev, "%ld Hz actual, %s\n", + clk_get_rate(ssp->clk) / 2 + / (1 + ((chip->cr0 & SSCR0_SCR(0x0ff)) >> 8)), + chip->enable_dma ? "DMA" : "PIO"); + + if (spi->bits_per_word <= 8) { + chip->n_bytes = 1; + chip->dma_width = DCMD_WIDTH1; + chip->read = u8_reader; + chip->write = u8_writer; + } else if (spi->bits_per_word <= 16) { + chip->n_bytes = 2; + chip->dma_width = DCMD_WIDTH2; + chip->read = u16_reader; + chip->write = u16_writer; + } else if (spi->bits_per_word <= 32) { + chip->cr0 |= SSCR0_EDSS; + chip->n_bytes = 4; + chip->dma_width = DCMD_WIDTH4; + chip->read = u32_reader; + chip->write = u32_writer; + } else { + dev_err(&spi->dev, "invalid wordsize\n"); + return -ENODEV; + } + chip->bits_per_word = spi->bits_per_word; + + spi_set_ctldata(spi, chip); + + if (drv_data->ssp_type == CE4100_SSP) + return 0; + + return setup_cs(spi, chip, chip_info); +} + +static void cleanup(struct spi_device *spi) +{ + struct chip_data *chip = spi_get_ctldata(spi); + struct driver_data *drv_data = spi_master_get_devdata(spi->master); + + if (!chip) + return; + + if (drv_data->ssp_type != CE4100_SSP && gpio_is_valid(chip->gpio_cs)) + gpio_free(chip->gpio_cs); + + kfree(chip); +} + +static int __devinit init_queue(struct driver_data *drv_data) +{ + INIT_LIST_HEAD(&drv_data->queue); + spin_lock_init(&drv_data->lock); + + drv_data->run = QUEUE_STOPPED; + drv_data->busy = 0; + + tasklet_init(&drv_data->pump_transfers, + pump_transfers, (unsigned long)drv_data); + + INIT_WORK(&drv_data->pump_messages, pump_messages); + drv_data->workqueue = create_singlethread_workqueue( + dev_name(drv_data->master->dev.parent)); + if (drv_data->workqueue == NULL) + return -EBUSY; + + return 0; +} + +static int start_queue(struct driver_data *drv_data) +{ + unsigned long flags; + + spin_lock_irqsave(&drv_data->lock, flags); + + if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return -EBUSY; + } + + drv_data->run = QUEUE_RUNNING; + drv_data->cur_msg = NULL; + drv_data->cur_transfer = NULL; + drv_data->cur_chip = NULL; + spin_unlock_irqrestore(&drv_data->lock, flags); + + queue_work(drv_data->workqueue, &drv_data->pump_messages); + + return 0; +} + +static int stop_queue(struct driver_data *drv_data) +{ + unsigned long flags; + unsigned limit = 500; + int status = 0; + + spin_lock_irqsave(&drv_data->lock, flags); + + /* This is a bit lame, but is optimized for the common execution path. + * A wait_queue on the drv_data->busy could be used, but then the common + * execution path (pump_messages) would be required to call wake_up or + * friends on every SPI message. Do this instead */ + drv_data->run = QUEUE_STOPPED; + while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) { + spin_unlock_irqrestore(&drv_data->lock, flags); + msleep(10); + spin_lock_irqsave(&drv_data->lock, flags); + } + + if (!list_empty(&drv_data->queue) || drv_data->busy) + status = -EBUSY; + + spin_unlock_irqrestore(&drv_data->lock, flags); + + return status; +} + +static int destroy_queue(struct driver_data *drv_data) +{ + int status; + + status = stop_queue(drv_data); + /* we are unloading the module or failing to load (only two calls + * to this routine), and neither call can handle a return value. + * However, destroy_workqueue calls flush_workqueue, and that will + * block until all work is done. If the reason that stop_queue + * timed out is that the work will never finish, then it does no + * good to call destroy_workqueue, so return anyway. */ + if (status != 0) + return status; + + destroy_workqueue(drv_data->workqueue); + + return 0; +} + +static int __devinit pxa2xx_spi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct pxa2xx_spi_master *platform_info; + struct spi_master *master; + struct driver_data *drv_data; + struct ssp_device *ssp; + int status; + + platform_info = dev->platform_data; + + ssp = pxa_ssp_request(pdev->id, pdev->name); + if (ssp == NULL) { + dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id); + return -ENODEV; + } + + /* Allocate master with space for drv_data and null dma buffer */ + master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); + if (!master) { + dev_err(&pdev->dev, "cannot alloc spi_master\n"); + pxa_ssp_free(ssp); + return -ENOMEM; + } + drv_data = spi_master_get_devdata(master); + drv_data->master = master; + drv_data->master_info = platform_info; + drv_data->pdev = pdev; + drv_data->ssp = ssp; + + master->dev.parent = &pdev->dev; + master->dev.of_node = pdev->dev.of_node; + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + master->bus_num = pdev->id; + master->num_chipselect = platform_info->num_chipselect; + master->dma_alignment = DMA_ALIGNMENT; + master->cleanup = cleanup; + master->setup = setup; + master->transfer = transfer; + + drv_data->ssp_type = ssp->type; + drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data + + sizeof(struct driver_data)), 8); + + drv_data->ioaddr = ssp->mmio_base; + drv_data->ssdr_physical = ssp->phys_base + SSDR; + if (pxa25x_ssp_comp(drv_data)) { + drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE; + drv_data->dma_cr1 = 0; + drv_data->clear_sr = SSSR_ROR; + drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR; + } else { + drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE; + drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE; + drv_data->clear_sr = SSSR_ROR | SSSR_TINT; + drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR; + } + + status = request_irq(ssp->irq, ssp_int, IRQF_SHARED, dev_name(dev), + drv_data); + if (status < 0) { + dev_err(&pdev->dev, "cannot get IRQ %d\n", ssp->irq); + goto out_error_master_alloc; + } + + /* Setup DMA if requested */ + drv_data->tx_channel = -1; + drv_data->rx_channel = -1; + if (platform_info->enable_dma) { + + /* Get two DMA channels (rx and tx) */ + drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx", + DMA_PRIO_HIGH, + dma_handler, + drv_data); + if (drv_data->rx_channel < 0) { + dev_err(dev, "problem (%d) requesting rx channel\n", + drv_data->rx_channel); + status = -ENODEV; + goto out_error_irq_alloc; + } + drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx", + DMA_PRIO_MEDIUM, + dma_handler, + drv_data); + if (drv_data->tx_channel < 0) { + dev_err(dev, "problem (%d) requesting tx channel\n", + drv_data->tx_channel); + status = -ENODEV; + goto out_error_dma_alloc; + } + + DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel; + DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel; + } + + /* Enable SOC clock */ + clk_enable(ssp->clk); + + /* Load default SSP configuration */ + write_SSCR0(0, drv_data->ioaddr); + write_SSCR1(SSCR1_RxTresh(RX_THRESH_DFLT) | + SSCR1_TxTresh(TX_THRESH_DFLT), + drv_data->ioaddr); + write_SSCR0(SSCR0_SCR(2) + | SSCR0_Motorola + | SSCR0_DataSize(8), + drv_data->ioaddr); + if (!pxa25x_ssp_comp(drv_data)) + write_SSTO(0, drv_data->ioaddr); + write_SSPSP(0, drv_data->ioaddr); + + /* Initial and start queue */ + status = init_queue(drv_data); + if (status != 0) { + dev_err(&pdev->dev, "problem initializing queue\n"); + goto out_error_clock_enabled; + } + status = start_queue(drv_data); + if (status != 0) { + dev_err(&pdev->dev, "problem starting queue\n"); + goto out_error_clock_enabled; + } + + /* Register with the SPI framework */ + platform_set_drvdata(pdev, drv_data); + status = spi_register_master(master); + if (status != 0) { + dev_err(&pdev->dev, "problem registering spi master\n"); + goto out_error_queue_alloc; + } + + return status; + +out_error_queue_alloc: + destroy_queue(drv_data); + +out_error_clock_enabled: + clk_disable(ssp->clk); + +out_error_dma_alloc: + if (drv_data->tx_channel != -1) + pxa_free_dma(drv_data->tx_channel); + if (drv_data->rx_channel != -1) + pxa_free_dma(drv_data->rx_channel); + +out_error_irq_alloc: + free_irq(ssp->irq, drv_data); + +out_error_master_alloc: + spi_master_put(master); + pxa_ssp_free(ssp); + return status; +} + +static int pxa2xx_spi_remove(struct platform_device *pdev) +{ + struct driver_data *drv_data = platform_get_drvdata(pdev); + struct ssp_device *ssp; + int status = 0; + + if (!drv_data) + return 0; + ssp = drv_data->ssp; + + /* Remove the queue */ + status = destroy_queue(drv_data); + if (status != 0) + /* the kernel does not check the return status of this + * this routine (mod->exit, within the kernel). Therefore + * nothing is gained by returning from here, the module is + * going away regardless, and we should not leave any more + * resources allocated than necessary. We cannot free the + * message memory in drv_data->queue, but we can release the + * resources below. I think the kernel should honor -EBUSY + * returns but... */ + dev_err(&pdev->dev, "pxa2xx_spi_remove: workqueue will not " + "complete, message memory not freed\n"); + + /* Disable the SSP at the peripheral and SOC level */ + write_SSCR0(0, drv_data->ioaddr); + clk_disable(ssp->clk); + + /* Release DMA */ + if (drv_data->master_info->enable_dma) { + DRCMR(ssp->drcmr_rx) = 0; + DRCMR(ssp->drcmr_tx) = 0; + pxa_free_dma(drv_data->tx_channel); + pxa_free_dma(drv_data->rx_channel); + } + + /* Release IRQ */ + free_irq(ssp->irq, drv_data); + + /* Release SSP */ + pxa_ssp_free(ssp); + + /* Disconnect from the SPI framework */ + spi_unregister_master(drv_data->master); + + /* Prevent double remove */ + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static void pxa2xx_spi_shutdown(struct platform_device *pdev) +{ + int status = 0; + + if ((status = pxa2xx_spi_remove(pdev)) != 0) + dev_err(&pdev->dev, "shutdown failed with %d\n", status); +} + +#ifdef CONFIG_PM +static int pxa2xx_spi_suspend(struct device *dev) +{ + struct driver_data *drv_data = dev_get_drvdata(dev); + struct ssp_device *ssp = drv_data->ssp; + int status = 0; + + status = stop_queue(drv_data); + if (status != 0) + return status; + write_SSCR0(0, drv_data->ioaddr); + clk_disable(ssp->clk); + + return 0; +} + +static int pxa2xx_spi_resume(struct device *dev) +{ + struct driver_data *drv_data = dev_get_drvdata(dev); + struct ssp_device *ssp = drv_data->ssp; + int status = 0; + + if (drv_data->rx_channel != -1) + DRCMR(drv_data->ssp->drcmr_rx) = + DRCMR_MAPVLD | drv_data->rx_channel; + if (drv_data->tx_channel != -1) + DRCMR(drv_data->ssp->drcmr_tx) = + DRCMR_MAPVLD | drv_data->tx_channel; + + /* Enable the SSP clock */ + clk_enable(ssp->clk); + + /* Start the queue running */ + status = start_queue(drv_data); + if (status != 0) { + dev_err(dev, "problem starting queue (%d)\n", status); + return status; + } + + return 0; +} + +static const struct dev_pm_ops pxa2xx_spi_pm_ops = { + .suspend = pxa2xx_spi_suspend, + .resume = pxa2xx_spi_resume, +}; +#endif + +static struct platform_driver driver = { + .driver = { + .name = "pxa2xx-spi", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &pxa2xx_spi_pm_ops, +#endif + }, + .probe = pxa2xx_spi_probe, + .remove = pxa2xx_spi_remove, + .shutdown = pxa2xx_spi_shutdown, +}; + +static int __init pxa2xx_spi_init(void) +{ + return platform_driver_register(&driver); +} +subsys_initcall(pxa2xx_spi_init); + +static void __exit pxa2xx_spi_exit(void) +{ + platform_driver_unregister(&driver); +} +module_exit(pxa2xx_spi_exit); diff --git a/drivers/spi/spi-s3c24xx-fiq.S b/drivers/spi/spi-s3c24xx-fiq.S new file mode 100644 index 000000000000..059f2dc1fda2 --- /dev/null +++ b/drivers/spi/spi-s3c24xx-fiq.S @@ -0,0 +1,116 @@ +/* linux/drivers/spi/spi_s3c24xx_fiq.S + * + * Copyright 2009 Simtec Electronics + * Ben Dooks + * + * S3C24XX SPI - FIQ pseudo-DMA transfer code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include + +#include +#include +#include + +#include "spi-s3c24xx-fiq.h" + + .text + + @ entry to these routines is as follows, with the register names + @ defined in fiq.h so that they can be shared with the C files which + @ setup the calling registers. + @ + @ fiq_rirq The base of the IRQ registers to find S3C2410_SRCPND + @ fiq_rtmp Temporary register to hold tx/rx data + @ fiq_rspi The base of the SPI register block + @ fiq_rtx The tx buffer pointer + @ fiq_rrx The rx buffer pointer + @ fiq_rcount The number of bytes to move + + @ each entry starts with a word entry of how long it is + @ and an offset to the irq acknowledgment word + +ENTRY(s3c24xx_spi_fiq_rx) +s3c24xx_spi_fix_rx: + .word fiq_rx_end - fiq_rx_start + .word fiq_rx_irq_ack - fiq_rx_start +fiq_rx_start: + ldr fiq_rtmp, fiq_rx_irq_ack + str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] + + ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] + strb fiq_rtmp, [ fiq_rrx ], #1 + + mov fiq_rtmp, #0xff + strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] + + subs fiq_rcount, fiq_rcount, #1 + subnes pc, lr, #4 @@ return, still have work to do + + @@ set IRQ controller so that next op will trigger IRQ + mov fiq_rtmp, #0 + str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] + subs pc, lr, #4 + +fiq_rx_irq_ack: + .word 0 +fiq_rx_end: + +ENTRY(s3c24xx_spi_fiq_txrx) +s3c24xx_spi_fiq_txrx: + .word fiq_txrx_end - fiq_txrx_start + .word fiq_txrx_irq_ack - fiq_txrx_start +fiq_txrx_start: + + ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] + strb fiq_rtmp, [ fiq_rrx ], #1 + + ldr fiq_rtmp, fiq_txrx_irq_ack + str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] + + ldrb fiq_rtmp, [ fiq_rtx ], #1 + strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] + + subs fiq_rcount, fiq_rcount, #1 + subnes pc, lr, #4 @@ return, still have work to do + + mov fiq_rtmp, #0 + str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] + subs pc, lr, #4 + +fiq_txrx_irq_ack: + .word 0 + +fiq_txrx_end: + +ENTRY(s3c24xx_spi_fiq_tx) +s3c24xx_spi_fix_tx: + .word fiq_tx_end - fiq_tx_start + .word fiq_tx_irq_ack - fiq_tx_start +fiq_tx_start: + ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] + + ldr fiq_rtmp, fiq_tx_irq_ack + str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] + + ldrb fiq_rtmp, [ fiq_rtx ], #1 + strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] + + subs fiq_rcount, fiq_rcount, #1 + subnes pc, lr, #4 @@ return, still have work to do + + mov fiq_rtmp, #0 + str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] + subs pc, lr, #4 + +fiq_tx_irq_ack: + .word 0 + +fiq_tx_end: + + .end diff --git a/drivers/spi/spi-s3c24xx-fiq.h b/drivers/spi/spi-s3c24xx-fiq.h new file mode 100644 index 000000000000..a5950bb25b51 --- /dev/null +++ b/drivers/spi/spi-s3c24xx-fiq.h @@ -0,0 +1,26 @@ +/* linux/drivers/spi/spi_s3c24xx_fiq.h + * + * Copyright 2009 Simtec Electronics + * Ben Dooks + * + * S3C24XX SPI - FIQ pseudo-DMA transfer support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* We have R8 through R13 to play with */ + +#ifdef __ASSEMBLY__ +#define __REG_NR(x) r##x +#else +#define __REG_NR(x) (x) +#endif + +#define fiq_rspi __REG_NR(8) +#define fiq_rtmp __REG_NR(9) +#define fiq_rrx __REG_NR(10) +#define fiq_rtx __REG_NR(11) +#define fiq_rcount __REG_NR(12) +#define fiq_rirq __REG_NR(13) diff --git a/drivers/spi/spi-s3c24xx-gpio.c b/drivers/spi/spi-s3c24xx-gpio.c new file mode 100644 index 000000000000..2d3c085930fe --- /dev/null +++ b/drivers/spi/spi-s3c24xx-gpio.c @@ -0,0 +1,200 @@ +/* + * Copyright (c) 2006 Ben Dooks + * Copyright (c) 2006 Simtec Electronics + * + * S3C24XX GPIO based SPI driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +struct s3c2410_spigpio { + struct spi_bitbang bitbang; + + struct s3c2410_spigpio_info *info; + struct platform_device *dev; +}; + +static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi) +{ + return spi_master_get_devdata(spi->master); +} + +static inline void setsck(struct spi_device *dev, int on) +{ + struct s3c2410_spigpio *sg = spidev_to_sg(dev); + s3c2410_gpio_setpin(sg->info->pin_clk, on ? 1 : 0); +} + +static inline void setmosi(struct spi_device *dev, int on) +{ + struct s3c2410_spigpio *sg = spidev_to_sg(dev); + s3c2410_gpio_setpin(sg->info->pin_mosi, on ? 1 : 0); +} + +static inline u32 getmiso(struct spi_device *dev) +{ + struct s3c2410_spigpio *sg = spidev_to_sg(dev); + return s3c2410_gpio_getpin(sg->info->pin_miso) ? 1 : 0; +} + +#define spidelay(x) ndelay(x) + +#include "spi-bitbang-txrx.h" + + +static u32 s3c2410_spigpio_txrx_mode0(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); +} + +static u32 s3c2410_spigpio_txrx_mode1(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); +} + +static u32 s3c2410_spigpio_txrx_mode2(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); +} + +static u32 s3c2410_spigpio_txrx_mode3(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); +} + + +static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value) +{ + struct s3c2410_spigpio *sg = spidev_to_sg(dev); + + if (sg->info && sg->info->chip_select) + (sg->info->chip_select)(sg->info, value); +} + +static int s3c2410_spigpio_probe(struct platform_device *dev) +{ + struct s3c2410_spigpio_info *info; + struct spi_master *master; + struct s3c2410_spigpio *sp; + int ret; + + master = spi_alloc_master(&dev->dev, sizeof(struct s3c2410_spigpio)); + if (master == NULL) { + dev_err(&dev->dev, "failed to allocate spi master\n"); + ret = -ENOMEM; + goto err; + } + + sp = spi_master_get_devdata(master); + + platform_set_drvdata(dev, sp); + + /* copy in the plkatform data */ + info = sp->info = dev->dev.platform_data; + + /* setup spi bitbang adaptor */ + sp->bitbang.master = spi_master_get(master); + sp->bitbang.master->bus_num = info->bus_num; + sp->bitbang.master->num_chipselect = info->num_chipselect; + sp->bitbang.chipselect = s3c2410_spigpio_chipselect; + + sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0; + sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1; + sp->bitbang.txrx_word[SPI_MODE_2] = s3c2410_spigpio_txrx_mode2; + sp->bitbang.txrx_word[SPI_MODE_3] = s3c2410_spigpio_txrx_mode3; + + /* set state of spi pins, always assume that the clock is + * available, but do check the MOSI and MISO. */ + s3c2410_gpio_setpin(info->pin_clk, 0); + s3c2410_gpio_cfgpin(info->pin_clk, S3C2410_GPIO_OUTPUT); + + if (info->pin_mosi < S3C2410_GPH10) { + s3c2410_gpio_setpin(info->pin_mosi, 0); + s3c2410_gpio_cfgpin(info->pin_mosi, S3C2410_GPIO_OUTPUT); + } + + if (info->pin_miso != S3C2410_GPA0 && info->pin_miso < S3C2410_GPH10) + s3c2410_gpio_cfgpin(info->pin_miso, S3C2410_GPIO_INPUT); + + ret = spi_bitbang_start(&sp->bitbang); + if (ret) + goto err_no_bitbang; + + return 0; + + err_no_bitbang: + spi_master_put(sp->bitbang.master); + err: + return ret; + +} + +static int s3c2410_spigpio_remove(struct platform_device *dev) +{ + struct s3c2410_spigpio *sp = platform_get_drvdata(dev); + + spi_bitbang_stop(&sp->bitbang); + spi_master_put(sp->bitbang.master); + + return 0; +} + +/* all gpio should be held over suspend/resume, so we should + * not need to deal with this +*/ + +#define s3c2410_spigpio_suspend NULL +#define s3c2410_spigpio_resume NULL + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:spi_s3c24xx_gpio"); + +static struct platform_driver s3c2410_spigpio_drv = { + .probe = s3c2410_spigpio_probe, + .remove = s3c2410_spigpio_remove, + .suspend = s3c2410_spigpio_suspend, + .resume = s3c2410_spigpio_resume, + .driver = { + .name = "spi_s3c24xx_gpio", + .owner = THIS_MODULE, + }, +}; + +static int __init s3c2410_spigpio_init(void) +{ + return platform_driver_register(&s3c2410_spigpio_drv); +} + +static void __exit s3c2410_spigpio_exit(void) +{ + platform_driver_unregister(&s3c2410_spigpio_drv); +} + +module_init(s3c2410_spigpio_init); +module_exit(s3c2410_spigpio_exit); + +MODULE_DESCRIPTION("S3C24XX SPI Driver"); +MODULE_AUTHOR("Ben Dooks, "); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c new file mode 100644 index 000000000000..1996ac57ef91 --- /dev/null +++ b/drivers/spi/spi-s3c24xx.c @@ -0,0 +1,745 @@ +/* + * Copyright (c) 2006 Ben Dooks + * Copyright 2006-2009 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include +#include + +#include "spi-s3c24xx-fiq.h" + +/** + * s3c24xx_spi_devstate - per device data + * @hz: Last frequency calculated for @sppre field. + * @mode: Last mode setting for the @spcon field. + * @spcon: Value to write to the SPCON register. + * @sppre: Value to write to the SPPRE register. + */ +struct s3c24xx_spi_devstate { + unsigned int hz; + unsigned int mode; + u8 spcon; + u8 sppre; +}; + +enum spi_fiq_mode { + FIQ_MODE_NONE = 0, + FIQ_MODE_TX = 1, + FIQ_MODE_RX = 2, + FIQ_MODE_TXRX = 3, +}; + +struct s3c24xx_spi { + /* bitbang has to be first */ + struct spi_bitbang bitbang; + struct completion done; + + void __iomem *regs; + int irq; + int len; + int count; + + struct fiq_handler fiq_handler; + enum spi_fiq_mode fiq_mode; + unsigned char fiq_inuse; + unsigned char fiq_claimed; + + void (*set_cs)(struct s3c2410_spi_info *spi, + int cs, int pol); + + /* data buffers */ + const unsigned char *tx; + unsigned char *rx; + + struct clk *clk; + struct resource *ioarea; + struct spi_master *master; + struct spi_device *curdev; + struct device *dev; + struct s3c2410_spi_info *pdata; +}; + + +#define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT) +#define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP) + +static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev) +{ + return spi_master_get_devdata(sdev->master); +} + +static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol) +{ + gpio_set_value(spi->pin_cs, pol); +} + +static void s3c24xx_spi_chipsel(struct spi_device *spi, int value) +{ + struct s3c24xx_spi_devstate *cs = spi->controller_state; + struct s3c24xx_spi *hw = to_hw(spi); + unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0; + + /* change the chipselect state and the state of the spi engine clock */ + + switch (value) { + case BITBANG_CS_INACTIVE: + hw->set_cs(hw->pdata, spi->chip_select, cspol^1); + writeb(cs->spcon, hw->regs + S3C2410_SPCON); + break; + + case BITBANG_CS_ACTIVE: + writeb(cs->spcon | S3C2410_SPCON_ENSCK, + hw->regs + S3C2410_SPCON); + hw->set_cs(hw->pdata, spi->chip_select, cspol); + break; + } +} + +static int s3c24xx_spi_update_state(struct spi_device *spi, + struct spi_transfer *t) +{ + struct s3c24xx_spi *hw = to_hw(spi); + struct s3c24xx_spi_devstate *cs = spi->controller_state; + unsigned int bpw; + unsigned int hz; + unsigned int div; + unsigned long clk; + + bpw = t ? t->bits_per_word : spi->bits_per_word; + hz = t ? t->speed_hz : spi->max_speed_hz; + + if (!bpw) + bpw = 8; + + if (!hz) + hz = spi->max_speed_hz; + + if (bpw != 8) { + dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw); + return -EINVAL; + } + + if (spi->mode != cs->mode) { + u8 spcon = SPCON_DEFAULT | S3C2410_SPCON_ENSCK; + + if (spi->mode & SPI_CPHA) + spcon |= S3C2410_SPCON_CPHA_FMTB; + + if (spi->mode & SPI_CPOL) + spcon |= S3C2410_SPCON_CPOL_HIGH; + + cs->mode = spi->mode; + cs->spcon = spcon; + } + + if (cs->hz != hz) { + clk = clk_get_rate(hw->clk); + div = DIV_ROUND_UP(clk, hz * 2) - 1; + + if (div > 255) + div = 255; + + dev_dbg(&spi->dev, "pre-scaler=%d (wanted %d, got %ld)\n", + div, hz, clk / (2 * (div + 1))); + + cs->hz = hz; + cs->sppre = div; + } + + return 0; +} + +static int s3c24xx_spi_setupxfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct s3c24xx_spi_devstate *cs = spi->controller_state; + struct s3c24xx_spi *hw = to_hw(spi); + int ret; + + ret = s3c24xx_spi_update_state(spi, t); + if (!ret) + writeb(cs->sppre, hw->regs + S3C2410_SPPRE); + + return ret; +} + +static int s3c24xx_spi_setup(struct spi_device *spi) +{ + struct s3c24xx_spi_devstate *cs = spi->controller_state; + struct s3c24xx_spi *hw = to_hw(spi); + int ret; + + /* allocate settings on the first call */ + if (!cs) { + cs = kzalloc(sizeof(struct s3c24xx_spi_devstate), GFP_KERNEL); + if (!cs) { + dev_err(&spi->dev, "no memory for controller state\n"); + return -ENOMEM; + } + + cs->spcon = SPCON_DEFAULT; + cs->hz = -1; + spi->controller_state = cs; + } + + /* initialise the state from the device */ + ret = s3c24xx_spi_update_state(spi, NULL); + if (ret) + return ret; + + spin_lock(&hw->bitbang.lock); + if (!hw->bitbang.busy) { + hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE); + /* need to ndelay for 0.5 clocktick ? */ + } + spin_unlock(&hw->bitbang.lock); + + return 0; +} + +static void s3c24xx_spi_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} + +static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count) +{ + return hw->tx ? hw->tx[count] : 0; +} + +#ifdef CONFIG_SPI_S3C24XX_FIQ +/* Support for FIQ based pseudo-DMA to improve the transfer speed. + * + * This code uses the assembly helper in spi_s3c24xx_spi.S which is + * used by the FIQ core to move data between main memory and the peripheral + * block. Since this is code running on the processor, there is no problem + * with cache coherency of the buffers, so we can use any buffer we like. + */ + +/** + * struct spi_fiq_code - FIQ code and header + * @length: The length of the code fragment, excluding this header. + * @ack_offset: The offset from @data to the word to place the IRQ ACK bit at. + * @data: The code itself to install as a FIQ handler. + */ +struct spi_fiq_code { + u32 length; + u32 ack_offset; + u8 data[0]; +}; + +extern struct spi_fiq_code s3c24xx_spi_fiq_txrx; +extern struct spi_fiq_code s3c24xx_spi_fiq_tx; +extern struct spi_fiq_code s3c24xx_spi_fiq_rx; + +/** + * ack_bit - turn IRQ into IRQ acknowledgement bit + * @irq: The interrupt number + * + * Returns the bit to write to the interrupt acknowledge register. + */ +static inline u32 ack_bit(unsigned int irq) +{ + return 1 << (irq - IRQ_EINT0); +} + +/** + * s3c24xx_spi_tryfiq - attempt to claim and setup FIQ for transfer + * @hw: The hardware state. + * + * Claim the FIQ handler (only one can be active at any one time) and + * then setup the correct transfer code for this transfer. + * + * This call updates all the necessary state information if successful, + * so the caller does not need to do anything more than start the transfer + * as normal, since the IRQ will have been re-routed to the FIQ handler. +*/ +void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw) +{ + struct pt_regs regs; + enum spi_fiq_mode mode; + struct spi_fiq_code *code; + int ret; + + if (!hw->fiq_claimed) { + /* try and claim fiq if we haven't got it, and if not + * then return and simply use another transfer method */ + + ret = claim_fiq(&hw->fiq_handler); + if (ret) + return; + } + + if (hw->tx && !hw->rx) + mode = FIQ_MODE_TX; + else if (hw->rx && !hw->tx) + mode = FIQ_MODE_RX; + else + mode = FIQ_MODE_TXRX; + + regs.uregs[fiq_rspi] = (long)hw->regs; + regs.uregs[fiq_rrx] = (long)hw->rx; + regs.uregs[fiq_rtx] = (long)hw->tx + 1; + regs.uregs[fiq_rcount] = hw->len - 1; + regs.uregs[fiq_rirq] = (long)S3C24XX_VA_IRQ; + + set_fiq_regs(®s); + + if (hw->fiq_mode != mode) { + u32 *ack_ptr; + + hw->fiq_mode = mode; + + switch (mode) { + case FIQ_MODE_TX: + code = &s3c24xx_spi_fiq_tx; + break; + case FIQ_MODE_RX: + code = &s3c24xx_spi_fiq_rx; + break; + case FIQ_MODE_TXRX: + code = &s3c24xx_spi_fiq_txrx; + break; + default: + code = NULL; + } + + BUG_ON(!code); + + ack_ptr = (u32 *)&code->data[code->ack_offset]; + *ack_ptr = ack_bit(hw->irq); + + set_fiq_handler(&code->data, code->length); + } + + s3c24xx_set_fiq(hw->irq, true); + + hw->fiq_mode = mode; + hw->fiq_inuse = 1; +} + +/** + * s3c24xx_spi_fiqop - FIQ core code callback + * @pw: Data registered with the handler + * @release: Whether this is a release or a return. + * + * Called by the FIQ code when another module wants to use the FIQ, so + * return whether we are currently using this or not and then update our + * internal state. + */ +static int s3c24xx_spi_fiqop(void *pw, int release) +{ + struct s3c24xx_spi *hw = pw; + int ret = 0; + + if (release) { + if (hw->fiq_inuse) + ret = -EBUSY; + + /* note, we do not need to unroute the FIQ, as the FIQ + * vector code de-routes it to signal the end of transfer */ + + hw->fiq_mode = FIQ_MODE_NONE; + hw->fiq_claimed = 0; + } else { + hw->fiq_claimed = 1; + } + + return ret; +} + +/** + * s3c24xx_spi_initfiq - setup the information for the FIQ core + * @hw: The hardware state. + * + * Setup the fiq_handler block to pass to the FIQ core. + */ +static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *hw) +{ + hw->fiq_handler.dev_id = hw; + hw->fiq_handler.name = dev_name(hw->dev); + hw->fiq_handler.fiq_op = s3c24xx_spi_fiqop; +} + +/** + * s3c24xx_spi_usefiq - return if we should be using FIQ. + * @hw: The hardware state. + * + * Return true if the platform data specifies whether this channel is + * allowed to use the FIQ. + */ +static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *hw) +{ + return hw->pdata->use_fiq; +} + +/** + * s3c24xx_spi_usingfiq - return if channel is using FIQ + * @spi: The hardware state. + * + * Return whether the channel is currently using the FIQ (separate from + * whether the FIQ is claimed). + */ +static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *spi) +{ + return spi->fiq_inuse; +} +#else + +static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *s) { } +static inline void s3c24xx_spi_tryfiq(struct s3c24xx_spi *s) { } +static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *s) { return false; } +static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *s) { return false; } + +#endif /* CONFIG_SPI_S3C24XX_FIQ */ + +static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t) +{ + struct s3c24xx_spi *hw = to_hw(spi); + + hw->tx = t->tx_buf; + hw->rx = t->rx_buf; + hw->len = t->len; + hw->count = 0; + + init_completion(&hw->done); + + hw->fiq_inuse = 0; + if (s3c24xx_spi_usefiq(hw) && t->len >= 3) + s3c24xx_spi_tryfiq(hw); + + /* send the first byte */ + writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT); + + wait_for_completion(&hw->done); + return hw->count; +} + +static irqreturn_t s3c24xx_spi_irq(int irq, void *dev) +{ + struct s3c24xx_spi *hw = dev; + unsigned int spsta = readb(hw->regs + S3C2410_SPSTA); + unsigned int count = hw->count; + + if (spsta & S3C2410_SPSTA_DCOL) { + dev_dbg(hw->dev, "data-collision\n"); + complete(&hw->done); + goto irq_done; + } + + if (!(spsta & S3C2410_SPSTA_READY)) { + dev_dbg(hw->dev, "spi not ready for tx?\n"); + complete(&hw->done); + goto irq_done; + } + + if (!s3c24xx_spi_usingfiq(hw)) { + hw->count++; + + if (hw->rx) + hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT); + + count++; + + if (count < hw->len) + writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT); + else + complete(&hw->done); + } else { + hw->count = hw->len; + hw->fiq_inuse = 0; + + if (hw->rx) + hw->rx[hw->len-1] = readb(hw->regs + S3C2410_SPRDAT); + + complete(&hw->done); + } + + irq_done: + return IRQ_HANDLED; +} + +static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw) +{ + /* for the moment, permanently enable the clock */ + + clk_enable(hw->clk); + + /* program defaults into the registers */ + + writeb(0xff, hw->regs + S3C2410_SPPRE); + writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN); + writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON); + + if (hw->pdata) { + if (hw->set_cs == s3c24xx_spi_gpiocs) + gpio_direction_output(hw->pdata->pin_cs, 1); + + if (hw->pdata->gpio_setup) + hw->pdata->gpio_setup(hw->pdata, 1); + } +} + +static int __init s3c24xx_spi_probe(struct platform_device *pdev) +{ + struct s3c2410_spi_info *pdata; + struct s3c24xx_spi *hw; + struct spi_master *master; + struct resource *res; + int err = 0; + + master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi)); + if (master == NULL) { + dev_err(&pdev->dev, "No memory for spi_master\n"); + err = -ENOMEM; + goto err_nomem; + } + + hw = spi_master_get_devdata(master); + memset(hw, 0, sizeof(struct s3c24xx_spi)); + + hw->master = spi_master_get(master); + hw->pdata = pdata = pdev->dev.platform_data; + hw->dev = &pdev->dev; + + if (pdata == NULL) { + dev_err(&pdev->dev, "No platform data supplied\n"); + err = -ENOENT; + goto err_no_pdata; + } + + platform_set_drvdata(pdev, hw); + init_completion(&hw->done); + + /* initialise fiq handler */ + + s3c24xx_spi_initfiq(hw); + + /* setup the master state. */ + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + master->num_chipselect = hw->pdata->num_cs; + master->bus_num = pdata->bus_num; + + /* setup the state for the bitbang driver */ + + hw->bitbang.master = hw->master; + hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer; + hw->bitbang.chipselect = s3c24xx_spi_chipsel; + hw->bitbang.txrx_bufs = s3c24xx_spi_txrx; + + hw->master->setup = s3c24xx_spi_setup; + hw->master->cleanup = s3c24xx_spi_cleanup; + + dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang); + + /* find and map our resources */ + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + err = -ENOENT; + goto err_no_iores; + } + + hw->ioarea = request_mem_region(res->start, resource_size(res), + pdev->name); + + if (hw->ioarea == NULL) { + dev_err(&pdev->dev, "Cannot reserve region\n"); + err = -ENXIO; + goto err_no_iores; + } + + hw->regs = ioremap(res->start, resource_size(res)); + if (hw->regs == NULL) { + dev_err(&pdev->dev, "Cannot map IO\n"); + err = -ENXIO; + goto err_no_iomap; + } + + hw->irq = platform_get_irq(pdev, 0); + if (hw->irq < 0) { + dev_err(&pdev->dev, "No IRQ specified\n"); + err = -ENOENT; + goto err_no_irq; + } + + err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw); + if (err) { + dev_err(&pdev->dev, "Cannot claim IRQ\n"); + goto err_no_irq; + } + + hw->clk = clk_get(&pdev->dev, "spi"); + if (IS_ERR(hw->clk)) { + dev_err(&pdev->dev, "No clock for device\n"); + err = PTR_ERR(hw->clk); + goto err_no_clk; + } + + /* setup any gpio we can */ + + if (!pdata->set_cs) { + if (pdata->pin_cs < 0) { + dev_err(&pdev->dev, "No chipselect pin\n"); + goto err_register; + } + + err = gpio_request(pdata->pin_cs, dev_name(&pdev->dev)); + if (err) { + dev_err(&pdev->dev, "Failed to get gpio for cs\n"); + goto err_register; + } + + hw->set_cs = s3c24xx_spi_gpiocs; + gpio_direction_output(pdata->pin_cs, 1); + } else + hw->set_cs = pdata->set_cs; + + s3c24xx_spi_initialsetup(hw); + + /* register our spi controller */ + + err = spi_bitbang_start(&hw->bitbang); + if (err) { + dev_err(&pdev->dev, "Failed to register SPI master\n"); + goto err_register; + } + + return 0; + + err_register: + if (hw->set_cs == s3c24xx_spi_gpiocs) + gpio_free(pdata->pin_cs); + + clk_disable(hw->clk); + clk_put(hw->clk); + + err_no_clk: + free_irq(hw->irq, hw); + + err_no_irq: + iounmap(hw->regs); + + err_no_iomap: + release_resource(hw->ioarea); + kfree(hw->ioarea); + + err_no_iores: + err_no_pdata: + spi_master_put(hw->master); + + err_nomem: + return err; +} + +static int __exit s3c24xx_spi_remove(struct platform_device *dev) +{ + struct s3c24xx_spi *hw = platform_get_drvdata(dev); + + platform_set_drvdata(dev, NULL); + + spi_bitbang_stop(&hw->bitbang); + + clk_disable(hw->clk); + clk_put(hw->clk); + + free_irq(hw->irq, hw); + iounmap(hw->regs); + + if (hw->set_cs == s3c24xx_spi_gpiocs) + gpio_free(hw->pdata->pin_cs); + + release_resource(hw->ioarea); + kfree(hw->ioarea); + + spi_master_put(hw->master); + return 0; +} + + +#ifdef CONFIG_PM + +static int s3c24xx_spi_suspend(struct device *dev) +{ + struct s3c24xx_spi *hw = platform_get_drvdata(to_platform_device(dev)); + + if (hw->pdata && hw->pdata->gpio_setup) + hw->pdata->gpio_setup(hw->pdata, 0); + + clk_disable(hw->clk); + return 0; +} + +static int s3c24xx_spi_resume(struct device *dev) +{ + struct s3c24xx_spi *hw = platform_get_drvdata(to_platform_device(dev)); + + s3c24xx_spi_initialsetup(hw); + return 0; +} + +static const struct dev_pm_ops s3c24xx_spi_pmops = { + .suspend = s3c24xx_spi_suspend, + .resume = s3c24xx_spi_resume, +}; + +#define S3C24XX_SPI_PMOPS &s3c24xx_spi_pmops +#else +#define S3C24XX_SPI_PMOPS NULL +#endif /* CONFIG_PM */ + +MODULE_ALIAS("platform:s3c2410-spi"); +static struct platform_driver s3c24xx_spi_driver = { + .remove = __exit_p(s3c24xx_spi_remove), + .driver = { + .name = "s3c2410-spi", + .owner = THIS_MODULE, + .pm = S3C24XX_SPI_PMOPS, + }, +}; + +static int __init s3c24xx_spi_init(void) +{ + return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe); +} + +static void __exit s3c24xx_spi_exit(void) +{ + platform_driver_unregister(&s3c24xx_spi_driver); +} + +module_init(s3c24xx_spi_init); +module_exit(s3c24xx_spi_exit); + +MODULE_DESCRIPTION("S3C24XX SPI Driver"); +MODULE_AUTHOR("Ben Dooks, "); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c new file mode 100644 index 000000000000..75e3a9bd3b06 --- /dev/null +++ b/drivers/spi/spi-s3c64xx.c @@ -0,0 +1,1247 @@ +/* + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* Registers and bit-fields */ + +#define S3C64XX_SPI_CH_CFG 0x00 +#define S3C64XX_SPI_CLK_CFG 0x04 +#define S3C64XX_SPI_MODE_CFG 0x08 +#define S3C64XX_SPI_SLAVE_SEL 0x0C +#define S3C64XX_SPI_INT_EN 0x10 +#define S3C64XX_SPI_STATUS 0x14 +#define S3C64XX_SPI_TX_DATA 0x18 +#define S3C64XX_SPI_RX_DATA 0x1C +#define S3C64XX_SPI_PACKET_CNT 0x20 +#define S3C64XX_SPI_PENDING_CLR 0x24 +#define S3C64XX_SPI_SWAP_CFG 0x28 +#define S3C64XX_SPI_FB_CLK 0x2C + +#define S3C64XX_SPI_CH_HS_EN (1<<6) /* High Speed Enable */ +#define S3C64XX_SPI_CH_SW_RST (1<<5) +#define S3C64XX_SPI_CH_SLAVE (1<<4) +#define S3C64XX_SPI_CPOL_L (1<<3) +#define S3C64XX_SPI_CPHA_B (1<<2) +#define S3C64XX_SPI_CH_RXCH_ON (1<<1) +#define S3C64XX_SPI_CH_TXCH_ON (1<<0) + +#define S3C64XX_SPI_CLKSEL_SRCMSK (3<<9) +#define S3C64XX_SPI_CLKSEL_SRCSHFT 9 +#define S3C64XX_SPI_ENCLK_ENABLE (1<<8) +#define S3C64XX_SPI_PSR_MASK 0xff + +#define S3C64XX_SPI_MODE_CH_TSZ_BYTE (0<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_HALFWORD (1<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_WORD (2<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_MASK (3<<29) +#define S3C64XX_SPI_MODE_BUS_TSZ_BYTE (0<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD (1<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_WORD (2<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_MASK (3<<17) +#define S3C64XX_SPI_MODE_RXDMA_ON (1<<2) +#define S3C64XX_SPI_MODE_TXDMA_ON (1<<1) +#define S3C64XX_SPI_MODE_4BURST (1<<0) + +#define S3C64XX_SPI_SLAVE_AUTO (1<<1) +#define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0) + +#define S3C64XX_SPI_ACT(c) writel(0, (c)->regs + S3C64XX_SPI_SLAVE_SEL) + +#define S3C64XX_SPI_DEACT(c) writel(S3C64XX_SPI_SLAVE_SIG_INACT, \ + (c)->regs + S3C64XX_SPI_SLAVE_SEL) + +#define S3C64XX_SPI_INT_TRAILING_EN (1<<6) +#define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5) +#define S3C64XX_SPI_INT_RX_UNDERRUN_EN (1<<4) +#define S3C64XX_SPI_INT_TX_OVERRUN_EN (1<<3) +#define S3C64XX_SPI_INT_TX_UNDERRUN_EN (1<<2) +#define S3C64XX_SPI_INT_RX_FIFORDY_EN (1<<1) +#define S3C64XX_SPI_INT_TX_FIFORDY_EN (1<<0) + +#define S3C64XX_SPI_ST_RX_OVERRUN_ERR (1<<5) +#define S3C64XX_SPI_ST_RX_UNDERRUN_ERR (1<<4) +#define S3C64XX_SPI_ST_TX_OVERRUN_ERR (1<<3) +#define S3C64XX_SPI_ST_TX_UNDERRUN_ERR (1<<2) +#define S3C64XX_SPI_ST_RX_FIFORDY (1<<1) +#define S3C64XX_SPI_ST_TX_FIFORDY (1<<0) + +#define S3C64XX_SPI_PACKET_CNT_EN (1<<16) + +#define S3C64XX_SPI_PND_TX_UNDERRUN_CLR (1<<4) +#define S3C64XX_SPI_PND_TX_OVERRUN_CLR (1<<3) +#define S3C64XX_SPI_PND_RX_UNDERRUN_CLR (1<<2) +#define S3C64XX_SPI_PND_RX_OVERRUN_CLR (1<<1) +#define S3C64XX_SPI_PND_TRAILING_CLR (1<<0) + +#define S3C64XX_SPI_SWAP_RX_HALF_WORD (1<<7) +#define S3C64XX_SPI_SWAP_RX_BYTE (1<<6) +#define S3C64XX_SPI_SWAP_RX_BIT (1<<5) +#define S3C64XX_SPI_SWAP_RX_EN (1<<4) +#define S3C64XX_SPI_SWAP_TX_HALF_WORD (1<<3) +#define S3C64XX_SPI_SWAP_TX_BYTE (1<<2) +#define S3C64XX_SPI_SWAP_TX_BIT (1<<1) +#define S3C64XX_SPI_SWAP_TX_EN (1<<0) + +#define S3C64XX_SPI_FBCLK_MSK (3<<0) + +#define S3C64XX_SPI_ST_TRLCNTZ(v, i) ((((v) >> (i)->rx_lvl_offset) & \ + (((i)->fifo_lvl_mask + 1))) \ + ? 1 : 0) + +#define S3C64XX_SPI_ST_TX_DONE(v, i) ((((v) >> (i)->rx_lvl_offset) & \ + (((i)->fifo_lvl_mask + 1) << 1)) \ + ? 1 : 0) +#define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask) +#define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask) + +#define S3C64XX_SPI_MAX_TRAILCNT 0x3ff +#define S3C64XX_SPI_TRAILCNT_OFF 19 + +#define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) + +#define SUSPND (1<<0) +#define SPIBUSY (1<<1) +#define RXBUSY (1<<2) +#define TXBUSY (1<<3) + +/** + * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver. + * @clk: Pointer to the spi clock. + * @src_clk: Pointer to the clock used to generate SPI signals. + * @master: Pointer to the SPI Protocol master. + * @workqueue: Work queue for the SPI xfer requests. + * @cntrlr_info: Platform specific data for the controller this driver manages. + * @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint. + * @work: Work + * @queue: To log SPI xfer requests. + * @lock: Controller specific lock. + * @state: Set of FLAGS to indicate status. + * @rx_dmach: Controller's DMA channel for Rx. + * @tx_dmach: Controller's DMA channel for Tx. + * @sfr_start: BUS address of SPI controller regs. + * @regs: Pointer to ioremap'ed controller registers. + * @xfer_completion: To indicate completion of xfer task. + * @cur_mode: Stores the active configuration of the controller. + * @cur_bpw: Stores the active bits per word settings. + * @cur_speed: Stores the active xfer clock speed. + */ +struct s3c64xx_spi_driver_data { + void __iomem *regs; + struct clk *clk; + struct clk *src_clk; + struct platform_device *pdev; + struct spi_master *master; + struct workqueue_struct *workqueue; + struct s3c64xx_spi_info *cntrlr_info; + struct spi_device *tgl_spi; + struct work_struct work; + struct list_head queue; + spinlock_t lock; + enum dma_ch rx_dmach; + enum dma_ch tx_dmach; + unsigned long sfr_start; + struct completion xfer_completion; + unsigned state; + unsigned cur_mode, cur_bpw; + unsigned cur_speed; +}; + +static struct s3c2410_dma_client s3c64xx_spi_dma_client = { + .name = "samsung-spi-dma", +}; + +static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) +{ + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + unsigned long loops; + u32 val; + + writel(0, regs + S3C64XX_SPI_PACKET_CNT); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val |= S3C64XX_SPI_CH_SW_RST; + val &= ~S3C64XX_SPI_CH_HS_EN; + writel(val, regs + S3C64XX_SPI_CH_CFG); + + /* Flush TxFIFO*/ + loops = msecs_to_loops(1); + do { + val = readl(regs + S3C64XX_SPI_STATUS); + } while (TX_FIFO_LVL(val, sci) && loops--); + + if (loops == 0) + dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n"); + + /* Flush RxFIFO*/ + loops = msecs_to_loops(1); + do { + val = readl(regs + S3C64XX_SPI_STATUS); + if (RX_FIFO_LVL(val, sci)) + readl(regs + S3C64XX_SPI_RX_DATA); + else + break; + } while (loops--); + + if (loops == 0) + dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n"); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~S3C64XX_SPI_CH_SW_RST; + writel(val, regs + S3C64XX_SPI_CH_CFG); + + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON); + writel(val, regs + S3C64XX_SPI_CH_CFG); +} + +static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, + struct spi_device *spi, + struct spi_transfer *xfer, int dma_mode) +{ + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + u32 modecfg, chcfg; + + modecfg = readl(regs + S3C64XX_SPI_MODE_CFG); + modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); + + chcfg = readl(regs + S3C64XX_SPI_CH_CFG); + chcfg &= ~S3C64XX_SPI_CH_TXCH_ON; + + if (dma_mode) { + chcfg &= ~S3C64XX_SPI_CH_RXCH_ON; + } else { + /* Always shift in data in FIFO, even if xfer is Tx only, + * this helps setting PCKT_CNT value for generating clocks + * as exactly needed. + */ + chcfg |= S3C64XX_SPI_CH_RXCH_ON; + writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) + | S3C64XX_SPI_PACKET_CNT_EN, + regs + S3C64XX_SPI_PACKET_CNT); + } + + if (xfer->tx_buf != NULL) { + sdd->state |= TXBUSY; + chcfg |= S3C64XX_SPI_CH_TXCH_ON; + if (dma_mode) { + modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; + s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8); + s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd, + xfer->tx_dma, xfer->len); + s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START); + } else { + switch (sdd->cur_bpw) { + case 32: + iowrite32_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len / 4); + break; + case 16: + iowrite16_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len / 2); + break; + default: + iowrite8_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len); + break; + } + } + } + + if (xfer->rx_buf != NULL) { + sdd->state |= RXBUSY; + + if (sci->high_speed && sdd->cur_speed >= 30000000UL + && !(sdd->cur_mode & SPI_CPHA)) + chcfg |= S3C64XX_SPI_CH_HS_EN; + + if (dma_mode) { + modecfg |= S3C64XX_SPI_MODE_RXDMA_ON; + chcfg |= S3C64XX_SPI_CH_RXCH_ON; + writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) + | S3C64XX_SPI_PACKET_CNT_EN, + regs + S3C64XX_SPI_PACKET_CNT); + s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8); + s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd, + xfer->rx_dma, xfer->len); + s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START); + } + } + + writel(modecfg, regs + S3C64XX_SPI_MODE_CFG); + writel(chcfg, regs + S3C64XX_SPI_CH_CFG); +} + +static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd, + struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs; + + if (sdd->tgl_spi != NULL) { /* If last device toggled after mssg */ + if (sdd->tgl_spi != spi) { /* if last mssg on diff device */ + /* Deselect the last toggled device */ + cs = sdd->tgl_spi->controller_data; + cs->set_level(cs->line, + spi->mode & SPI_CS_HIGH ? 0 : 1); + } + sdd->tgl_spi = NULL; + } + + cs = spi->controller_data; + cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0); +} + +static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd, + struct spi_transfer *xfer, int dma_mode) +{ + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + unsigned long val; + int ms; + + /* millisecs to xfer 'len' bytes @ 'cur_speed' */ + ms = xfer->len * 8 * 1000 / sdd->cur_speed; + ms += 10; /* some tolerance */ + + if (dma_mode) { + val = msecs_to_jiffies(ms) + 10; + val = wait_for_completion_timeout(&sdd->xfer_completion, val); + } else { + u32 status; + val = msecs_to_loops(ms); + do { + status = readl(regs + S3C64XX_SPI_STATUS); + } while (RX_FIFO_LVL(status, sci) < xfer->len && --val); + } + + if (!val) + return -EIO; + + if (dma_mode) { + u32 status; + + /* + * DmaTx returns after simply writing data in the FIFO, + * w/o waiting for real transmission on the bus to finish. + * DmaRx returns only after Dma read data from FIFO which + * needs bus transmission to finish, so we don't worry if + * Xfer involved Rx(with or without Tx). + */ + if (xfer->rx_buf == NULL) { + val = msecs_to_loops(10); + status = readl(regs + S3C64XX_SPI_STATUS); + while ((TX_FIFO_LVL(status, sci) + || !S3C64XX_SPI_ST_TX_DONE(status, sci)) + && --val) { + cpu_relax(); + status = readl(regs + S3C64XX_SPI_STATUS); + } + + if (!val) + return -EIO; + } + } else { + /* If it was only Tx */ + if (xfer->rx_buf == NULL) { + sdd->state &= ~TXBUSY; + return 0; + } + + switch (sdd->cur_bpw) { + case 32: + ioread32_rep(regs + S3C64XX_SPI_RX_DATA, + xfer->rx_buf, xfer->len / 4); + break; + case 16: + ioread16_rep(regs + S3C64XX_SPI_RX_DATA, + xfer->rx_buf, xfer->len / 2); + break; + default: + ioread8_rep(regs + S3C64XX_SPI_RX_DATA, + xfer->rx_buf, xfer->len); + break; + } + sdd->state &= ~RXBUSY; + } + + return 0; +} + +static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, + struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + + if (sdd->tgl_spi == spi) + sdd->tgl_spi = NULL; + + cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1); +} + +static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) +{ + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + u32 val; + + /* Disable Clock */ + if (sci->clk_from_cmu) { + clk_disable(sdd->src_clk); + } else { + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); + } + + /* Set Polarity and Phase */ + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~(S3C64XX_SPI_CH_SLAVE | + S3C64XX_SPI_CPOL_L | + S3C64XX_SPI_CPHA_B); + + if (sdd->cur_mode & SPI_CPOL) + val |= S3C64XX_SPI_CPOL_L; + + if (sdd->cur_mode & SPI_CPHA) + val |= S3C64XX_SPI_CPHA_B; + + writel(val, regs + S3C64XX_SPI_CH_CFG); + + /* Set Channel & DMA Mode */ + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~(S3C64XX_SPI_MODE_BUS_TSZ_MASK + | S3C64XX_SPI_MODE_CH_TSZ_MASK); + + switch (sdd->cur_bpw) { + case 32: + val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD; + val |= S3C64XX_SPI_MODE_CH_TSZ_WORD; + break; + case 16: + val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD; + val |= S3C64XX_SPI_MODE_CH_TSZ_HALFWORD; + break; + default: + val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE; + val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; + break; + } + + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + if (sci->clk_from_cmu) { + /* Configure Clock */ + /* There is half-multiplier before the SPI */ + clk_set_rate(sdd->src_clk, sdd->cur_speed * 2); + /* Enable Clock */ + clk_enable(sdd->src_clk); + } else { + /* Configure Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_PSR_MASK; + val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1) + & S3C64XX_SPI_PSR_MASK); + writel(val, regs + S3C64XX_SPI_CLK_CFG); + + /* Enable Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val |= S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); + } +} + +static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id, + int size, enum s3c2410_dma_buffresult res) +{ + struct s3c64xx_spi_driver_data *sdd = buf_id; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + + if (res == S3C2410_RES_OK) + sdd->state &= ~RXBUSY; + else + dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size); + + /* If the other done */ + if (!(sdd->state & TXBUSY)) + complete(&sdd->xfer_completion); + + spin_unlock_irqrestore(&sdd->lock, flags); +} + +static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id, + int size, enum s3c2410_dma_buffresult res) +{ + struct s3c64xx_spi_driver_data *sdd = buf_id; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + + if (res == S3C2410_RES_OK) + sdd->state &= ~TXBUSY; + else + dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size); + + /* If the other done */ + if (!(sdd->state & RXBUSY)) + complete(&sdd->xfer_completion); + + spin_unlock_irqrestore(&sdd->lock, flags); +} + +#define XFER_DMAADDR_INVALID DMA_BIT_MASK(32) + +static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, + struct spi_message *msg) +{ + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; + struct device *dev = &sdd->pdev->dev; + struct spi_transfer *xfer; + + if (msg->is_dma_mapped) + return 0; + + /* First mark all xfer unmapped */ + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + xfer->rx_dma = XFER_DMAADDR_INVALID; + xfer->tx_dma = XFER_DMAADDR_INVALID; + } + + /* Map until end or first fail */ + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + + if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) + continue; + + if (xfer->tx_buf != NULL) { + xfer->tx_dma = dma_map_single(dev, + (void *)xfer->tx_buf, xfer->len, + DMA_TO_DEVICE); + if (dma_mapping_error(dev, xfer->tx_dma)) { + dev_err(dev, "dma_map_single Tx failed\n"); + xfer->tx_dma = XFER_DMAADDR_INVALID; + return -ENOMEM; + } + } + + if (xfer->rx_buf != NULL) { + xfer->rx_dma = dma_map_single(dev, xfer->rx_buf, + xfer->len, DMA_FROM_DEVICE); + if (dma_mapping_error(dev, xfer->rx_dma)) { + dev_err(dev, "dma_map_single Rx failed\n"); + dma_unmap_single(dev, xfer->tx_dma, + xfer->len, DMA_TO_DEVICE); + xfer->tx_dma = XFER_DMAADDR_INVALID; + xfer->rx_dma = XFER_DMAADDR_INVALID; + return -ENOMEM; + } + } + } + + return 0; +} + +static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, + struct spi_message *msg) +{ + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; + struct device *dev = &sdd->pdev->dev; + struct spi_transfer *xfer; + + if (msg->is_dma_mapped) + return; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + + if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) + continue; + + if (xfer->rx_buf != NULL + && xfer->rx_dma != XFER_DMAADDR_INVALID) + dma_unmap_single(dev, xfer->rx_dma, + xfer->len, DMA_FROM_DEVICE); + + if (xfer->tx_buf != NULL + && xfer->tx_dma != XFER_DMAADDR_INVALID) + dma_unmap_single(dev, xfer->tx_dma, + xfer->len, DMA_TO_DEVICE); + } +} + +static void handle_msg(struct s3c64xx_spi_driver_data *sdd, + struct spi_message *msg) +{ + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; + struct spi_device *spi = msg->spi; + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + struct spi_transfer *xfer; + int status = 0, cs_toggle = 0; + u32 speed; + u8 bpw; + + /* If Master's(controller) state differs from that needed by Slave */ + if (sdd->cur_speed != spi->max_speed_hz + || sdd->cur_mode != spi->mode + || sdd->cur_bpw != spi->bits_per_word) { + sdd->cur_bpw = spi->bits_per_word; + sdd->cur_speed = spi->max_speed_hz; + sdd->cur_mode = spi->mode; + s3c64xx_spi_config(sdd); + } + + /* Map all the transfers if needed */ + if (s3c64xx_spi_map_mssg(sdd, msg)) { + dev_err(&spi->dev, + "Xfer: Unable to map message buffers!\n"); + status = -ENOMEM; + goto out; + } + + /* Configure feedback delay */ + writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK); + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + + unsigned long flags; + int use_dma; + + INIT_COMPLETION(sdd->xfer_completion); + + /* Only BPW and Speed may change across transfers */ + bpw = xfer->bits_per_word ? : spi->bits_per_word; + speed = xfer->speed_hz ? : spi->max_speed_hz; + + if (xfer->len % (bpw / 8)) { + dev_err(&spi->dev, + "Xfer length(%u) not a multiple of word size(%u)\n", + xfer->len, bpw / 8); + status = -EIO; + goto out; + } + + if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) { + sdd->cur_bpw = bpw; + sdd->cur_speed = speed; + s3c64xx_spi_config(sdd); + } + + /* Polling method for xfers not bigger than FIFO capacity */ + if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) + use_dma = 0; + else + use_dma = 1; + + spin_lock_irqsave(&sdd->lock, flags); + + /* Pending only which is to be done */ + sdd->state &= ~RXBUSY; + sdd->state &= ~TXBUSY; + + enable_datapath(sdd, spi, xfer, use_dma); + + /* Slave Select */ + enable_cs(sdd, spi); + + /* Start the signals */ + S3C64XX_SPI_ACT(sdd); + + spin_unlock_irqrestore(&sdd->lock, flags); + + status = wait_for_xfer(sdd, xfer, use_dma); + + /* Quiese the signals */ + S3C64XX_SPI_DEACT(sdd); + + if (status) { + dev_err(&spi->dev, "I/O Error: " + "rx-%d tx-%d res:rx-%c tx-%c len-%d\n", + xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0, + (sdd->state & RXBUSY) ? 'f' : 'p', + (sdd->state & TXBUSY) ? 'f' : 'p', + xfer->len); + + if (use_dma) { + if (xfer->tx_buf != NULL + && (sdd->state & TXBUSY)) + s3c2410_dma_ctrl(sdd->tx_dmach, + S3C2410_DMAOP_FLUSH); + if (xfer->rx_buf != NULL + && (sdd->state & RXBUSY)) + s3c2410_dma_ctrl(sdd->rx_dmach, + S3C2410_DMAOP_FLUSH); + } + + goto out; + } + + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + + if (xfer->cs_change) { + /* Hint that the next mssg is gonna be + for the same device */ + if (list_is_last(&xfer->transfer_list, + &msg->transfers)) + cs_toggle = 1; + else + disable_cs(sdd, spi); + } + + msg->actual_length += xfer->len; + + flush_fifo(sdd); + } + +out: + if (!cs_toggle || status) + disable_cs(sdd, spi); + else + sdd->tgl_spi = spi; + + s3c64xx_spi_unmap_mssg(sdd, msg); + + msg->status = status; + + if (msg->complete) + msg->complete(msg->context); +} + +static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) +{ + if (s3c2410_dma_request(sdd->rx_dmach, + &s3c64xx_spi_dma_client, NULL) < 0) { + dev_err(&sdd->pdev->dev, "cannot get RxDMA\n"); + return 0; + } + s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb); + s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW, + sdd->sfr_start + S3C64XX_SPI_RX_DATA); + + if (s3c2410_dma_request(sdd->tx_dmach, + &s3c64xx_spi_dma_client, NULL) < 0) { + dev_err(&sdd->pdev->dev, "cannot get TxDMA\n"); + s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); + return 0; + } + s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb); + s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM, + sdd->sfr_start + S3C64XX_SPI_TX_DATA); + + return 1; +} + +static void s3c64xx_spi_work(struct work_struct *work) +{ + struct s3c64xx_spi_driver_data *sdd = container_of(work, + struct s3c64xx_spi_driver_data, work); + unsigned long flags; + + /* Acquire DMA channels */ + while (!acquire_dma(sdd)) + msleep(10); + + spin_lock_irqsave(&sdd->lock, flags); + + while (!list_empty(&sdd->queue) + && !(sdd->state & SUSPND)) { + + struct spi_message *msg; + + msg = container_of(sdd->queue.next, struct spi_message, queue); + + list_del_init(&msg->queue); + + /* Set Xfer busy flag */ + sdd->state |= SPIBUSY; + + spin_unlock_irqrestore(&sdd->lock, flags); + + handle_msg(sdd, msg); + + spin_lock_irqsave(&sdd->lock, flags); + + sdd->state &= ~SPIBUSY; + } + + spin_unlock_irqrestore(&sdd->lock, flags); + + /* Free DMA channels */ + s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client); + s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); +} + +static int s3c64xx_spi_transfer(struct spi_device *spi, + struct spi_message *msg) +{ + struct s3c64xx_spi_driver_data *sdd; + unsigned long flags; + + sdd = spi_master_get_devdata(spi->master); + + spin_lock_irqsave(&sdd->lock, flags); + + if (sdd->state & SUSPND) { + spin_unlock_irqrestore(&sdd->lock, flags); + return -ESHUTDOWN; + } + + msg->status = -EINPROGRESS; + msg->actual_length = 0; + + list_add_tail(&msg->queue, &sdd->queue); + + queue_work(sdd->workqueue, &sdd->work); + + spin_unlock_irqrestore(&sdd->lock, flags); + + return 0; +} + +/* + * Here we only check the validity of requested configuration + * and save the configuration in a local data-structure. + * The controller is actually configured only just before we + * get a message to transfer. + */ +static int s3c64xx_spi_setup(struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_info *sci; + struct spi_message *msg; + unsigned long flags; + int err = 0; + + if (cs == NULL || cs->set_level == NULL) { + dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select); + return -ENODEV; + } + + sdd = spi_master_get_devdata(spi->master); + sci = sdd->cntrlr_info; + + spin_lock_irqsave(&sdd->lock, flags); + + list_for_each_entry(msg, &sdd->queue, queue) { + /* Is some mssg is already queued for this device */ + if (msg->spi == spi) { + dev_err(&spi->dev, + "setup: attempt while mssg in queue!\n"); + spin_unlock_irqrestore(&sdd->lock, flags); + return -EBUSY; + } + } + + if (sdd->state & SUSPND) { + spin_unlock_irqrestore(&sdd->lock, flags); + dev_err(&spi->dev, + "setup: SPI-%d not active!\n", spi->master->bus_num); + return -ESHUTDOWN; + } + + spin_unlock_irqrestore(&sdd->lock, flags); + + if (spi->bits_per_word != 8 + && spi->bits_per_word != 16 + && spi->bits_per_word != 32) { + dev_err(&spi->dev, "setup: %dbits/wrd not supported!\n", + spi->bits_per_word); + err = -EINVAL; + goto setup_exit; + } + + /* Check if we can provide the requested rate */ + if (!sci->clk_from_cmu) { + u32 psr, speed; + + /* Max possible */ + speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); + + if (spi->max_speed_hz > speed) + spi->max_speed_hz = speed; + + psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1; + psr &= S3C64XX_SPI_PSR_MASK; + if (psr == S3C64XX_SPI_PSR_MASK) + psr--; + + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz < speed) { + if (psr+1 < S3C64XX_SPI_PSR_MASK) { + psr++; + } else { + err = -EINVAL; + goto setup_exit; + } + } + + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz >= speed) + spi->max_speed_hz = speed; + else + err = -EINVAL; + } + +setup_exit: + + /* setup() returns with device de-selected */ + disable_cs(sdd, spi); + + return err; +} + +static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) +{ + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + unsigned int val; + + sdd->cur_speed = 0; + + S3C64XX_SPI_DEACT(sdd); + + /* Disable Interrupts - we use Polling if not DMA mode */ + writel(0, regs + S3C64XX_SPI_INT_EN); + + if (!sci->clk_from_cmu) + writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, + regs + S3C64XX_SPI_CLK_CFG); + writel(0, regs + S3C64XX_SPI_MODE_CFG); + writel(0, regs + S3C64XX_SPI_PACKET_CNT); + + /* Clear any irq pending bits */ + writel(readl(regs + S3C64XX_SPI_PENDING_CLR), + regs + S3C64XX_SPI_PENDING_CLR); + + writel(0, regs + S3C64XX_SPI_SWAP_CFG); + + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~S3C64XX_SPI_MODE_4BURST; + val &= ~(S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); + val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + flush_fifo(sdd); +} + +static int __init s3c64xx_spi_probe(struct platform_device *pdev) +{ + struct resource *mem_res, *dmatx_res, *dmarx_res; + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_info *sci; + struct spi_master *master; + int ret; + + if (pdev->id < 0) { + dev_err(&pdev->dev, + "Invalid platform device id-%d\n", pdev->id); + return -ENODEV; + } + + if (pdev->dev.platform_data == NULL) { + dev_err(&pdev->dev, "platform_data missing!\n"); + return -ENODEV; + } + + sci = pdev->dev.platform_data; + if (!sci->src_clk_name) { + dev_err(&pdev->dev, + "Board init must call s3c64xx_spi_set_info()\n"); + return -EINVAL; + } + + /* Check for availability of necessary resource */ + + dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (dmatx_res == NULL) { + dev_err(&pdev->dev, "Unable to get SPI-Tx dma resource\n"); + return -ENXIO; + } + + dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (dmarx_res == NULL) { + dev_err(&pdev->dev, "Unable to get SPI-Rx dma resource\n"); + return -ENXIO; + } + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (mem_res == NULL) { + dev_err(&pdev->dev, "Unable to get SPI MEM resource\n"); + return -ENXIO; + } + + master = spi_alloc_master(&pdev->dev, + sizeof(struct s3c64xx_spi_driver_data)); + if (master == NULL) { + dev_err(&pdev->dev, "Unable to allocate SPI Master\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, master); + + sdd = spi_master_get_devdata(master); + sdd->master = master; + sdd->cntrlr_info = sci; + sdd->pdev = pdev; + sdd->sfr_start = mem_res->start; + sdd->tx_dmach = dmatx_res->start; + sdd->rx_dmach = dmarx_res->start; + + sdd->cur_bpw = 8; + + master->bus_num = pdev->id; + master->setup = s3c64xx_spi_setup; + master->transfer = s3c64xx_spi_transfer; + master->num_chipselect = sci->num_cs; + master->dma_alignment = 8; + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + if (request_mem_region(mem_res->start, + resource_size(mem_res), pdev->name) == NULL) { + dev_err(&pdev->dev, "Req mem region failed\n"); + ret = -ENXIO; + goto err0; + } + + sdd->regs = ioremap(mem_res->start, resource_size(mem_res)); + if (sdd->regs == NULL) { + dev_err(&pdev->dev, "Unable to remap IO\n"); + ret = -ENXIO; + goto err1; + } + + if (sci->cfg_gpio == NULL || sci->cfg_gpio(pdev)) { + dev_err(&pdev->dev, "Unable to config gpio\n"); + ret = -EBUSY; + goto err2; + } + + /* Setup clocks */ + sdd->clk = clk_get(&pdev->dev, "spi"); + if (IS_ERR(sdd->clk)) { + dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n"); + ret = PTR_ERR(sdd->clk); + goto err3; + } + + if (clk_enable(sdd->clk)) { + dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n"); + ret = -EBUSY; + goto err4; + } + + sdd->src_clk = clk_get(&pdev->dev, sci->src_clk_name); + if (IS_ERR(sdd->src_clk)) { + dev_err(&pdev->dev, + "Unable to acquire clock '%s'\n", sci->src_clk_name); + ret = PTR_ERR(sdd->src_clk); + goto err5; + } + + if (clk_enable(sdd->src_clk)) { + dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", + sci->src_clk_name); + ret = -EBUSY; + goto err6; + } + + sdd->workqueue = create_singlethread_workqueue( + dev_name(master->dev.parent)); + if (sdd->workqueue == NULL) { + dev_err(&pdev->dev, "Unable to create workqueue\n"); + ret = -ENOMEM; + goto err7; + } + + /* Setup Deufult Mode */ + s3c64xx_spi_hwinit(sdd, pdev->id); + + spin_lock_init(&sdd->lock); + init_completion(&sdd->xfer_completion); + INIT_WORK(&sdd->work, s3c64xx_spi_work); + INIT_LIST_HEAD(&sdd->queue); + + if (spi_register_master(master)) { + dev_err(&pdev->dev, "cannot register SPI master\n"); + ret = -EBUSY; + goto err8; + } + + dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d " + "with %d Slaves attached\n", + pdev->id, master->num_chipselect); + dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n", + mem_res->end, mem_res->start, + sdd->rx_dmach, sdd->tx_dmach); + + return 0; + +err8: + destroy_workqueue(sdd->workqueue); +err7: + clk_disable(sdd->src_clk); +err6: + clk_put(sdd->src_clk); +err5: + clk_disable(sdd->clk); +err4: + clk_put(sdd->clk); +err3: +err2: + iounmap((void *) sdd->regs); +err1: + release_mem_region(mem_res->start, resource_size(mem_res)); +err0: + platform_set_drvdata(pdev, NULL); + spi_master_put(master); + + return ret; +} + +static int s3c64xx_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + struct resource *mem_res; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + sdd->state |= SUSPND; + spin_unlock_irqrestore(&sdd->lock, flags); + + while (sdd->state & SPIBUSY) + msleep(10); + + spi_unregister_master(master); + + destroy_workqueue(sdd->workqueue); + + clk_disable(sdd->src_clk); + clk_put(sdd->src_clk); + + clk_disable(sdd->clk); + clk_put(sdd->clk); + + iounmap((void *) sdd->regs); + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (mem_res != NULL) + release_mem_region(mem_res->start, resource_size(mem_res)); + + platform_set_drvdata(pdev, NULL); + spi_master_put(master); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + sdd->state |= SUSPND; + spin_unlock_irqrestore(&sdd->lock, flags); + + while (sdd->state & SPIBUSY) + msleep(10); + + /* Disable the clock */ + clk_disable(sdd->src_clk); + clk_disable(sdd->clk); + + sdd->cur_speed = 0; /* Output Clock is stopped */ + + return 0; +} + +static int s3c64xx_spi_resume(struct platform_device *pdev) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; + unsigned long flags; + + sci->cfg_gpio(pdev); + + /* Enable the clock */ + clk_enable(sdd->src_clk); + clk_enable(sdd->clk); + + s3c64xx_spi_hwinit(sdd, pdev->id); + + spin_lock_irqsave(&sdd->lock, flags); + sdd->state &= ~SUSPND; + spin_unlock_irqrestore(&sdd->lock, flags); + + return 0; +} +#else +#define s3c64xx_spi_suspend NULL +#define s3c64xx_spi_resume NULL +#endif /* CONFIG_PM */ + +static struct platform_driver s3c64xx_spi_driver = { + .driver = { + .name = "s3c64xx-spi", + .owner = THIS_MODULE, + }, + .remove = s3c64xx_spi_remove, + .suspend = s3c64xx_spi_suspend, + .resume = s3c64xx_spi_resume, +}; +MODULE_ALIAS("platform:s3c64xx-spi"); + +static int __init s3c64xx_spi_init(void) +{ + return platform_driver_probe(&s3c64xx_spi_driver, s3c64xx_spi_probe); +} +subsys_initcall(s3c64xx_spi_init); + +static void __exit s3c64xx_spi_exit(void) +{ + platform_driver_unregister(&s3c64xx_spi_driver); +} +module_exit(s3c64xx_spi_exit); + +MODULE_AUTHOR("Jaswinder Singh "); +MODULE_DESCRIPTION("S3C64XX SPI Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c new file mode 100644 index 000000000000..e00d94b22250 --- /dev/null +++ b/drivers/spi/spi-sh-msiof.c @@ -0,0 +1,749 @@ +/* + * SuperH MSIOF SPI Master Interface + * + * Copyright (c) 2009 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +struct sh_msiof_spi_priv { + struct spi_bitbang bitbang; /* must be first for spi_bitbang.c */ + void __iomem *mapbase; + struct clk *clk; + struct platform_device *pdev; + struct sh_msiof_spi_info *info; + struct completion done; + unsigned long flags; + int tx_fifo_size; + int rx_fifo_size; +}; + +#define TMDR1 0x00 +#define TMDR2 0x04 +#define TMDR3 0x08 +#define RMDR1 0x10 +#define RMDR2 0x14 +#define RMDR3 0x18 +#define TSCR 0x20 +#define RSCR 0x22 +#define CTR 0x28 +#define FCTR 0x30 +#define STR 0x40 +#define IER 0x44 +#define TDR1 0x48 +#define TDR2 0x4c +#define TFDR 0x50 +#define RDR1 0x58 +#define RDR2 0x5c +#define RFDR 0x60 + +#define CTR_TSCKE (1 << 15) +#define CTR_TFSE (1 << 14) +#define CTR_TXE (1 << 9) +#define CTR_RXE (1 << 8) + +#define STR_TEOF (1 << 23) +#define STR_REOF (1 << 7) + +static u32 sh_msiof_read(struct sh_msiof_spi_priv *p, int reg_offs) +{ + switch (reg_offs) { + case TSCR: + case RSCR: + return ioread16(p->mapbase + reg_offs); + default: + return ioread32(p->mapbase + reg_offs); + } +} + +static void sh_msiof_write(struct sh_msiof_spi_priv *p, int reg_offs, + u32 value) +{ + switch (reg_offs) { + case TSCR: + case RSCR: + iowrite16(value, p->mapbase + reg_offs); + break; + default: + iowrite32(value, p->mapbase + reg_offs); + break; + } +} + +static int sh_msiof_modify_ctr_wait(struct sh_msiof_spi_priv *p, + u32 clr, u32 set) +{ + u32 mask = clr | set; + u32 data; + int k; + + data = sh_msiof_read(p, CTR); + data &= ~clr; + data |= set; + sh_msiof_write(p, CTR, data); + + for (k = 100; k > 0; k--) { + if ((sh_msiof_read(p, CTR) & mask) == set) + break; + + udelay(10); + } + + return k > 0 ? 0 : -ETIMEDOUT; +} + +static irqreturn_t sh_msiof_spi_irq(int irq, void *data) +{ + struct sh_msiof_spi_priv *p = data; + + /* just disable the interrupt and wake up */ + sh_msiof_write(p, IER, 0); + complete(&p->done); + + return IRQ_HANDLED; +} + +static struct { + unsigned short div; + unsigned short scr; +} const sh_msiof_spi_clk_table[] = { + { 1, 0x0007 }, + { 2, 0x0000 }, + { 4, 0x0001 }, + { 8, 0x0002 }, + { 16, 0x0003 }, + { 32, 0x0004 }, + { 64, 0x1f00 }, + { 128, 0x1f01 }, + { 256, 0x1f02 }, + { 512, 0x1f03 }, + { 1024, 0x1f04 }, +}; + +static void sh_msiof_spi_set_clk_regs(struct sh_msiof_spi_priv *p, + unsigned long parent_rate, + unsigned long spi_hz) +{ + unsigned long div = 1024; + size_t k; + + if (!WARN_ON(!spi_hz || !parent_rate)) + div = parent_rate / spi_hz; + + /* TODO: make more fine grained */ + + for (k = 0; k < ARRAY_SIZE(sh_msiof_spi_clk_table); k++) { + if (sh_msiof_spi_clk_table[k].div >= div) + break; + } + + k = min_t(int, k, ARRAY_SIZE(sh_msiof_spi_clk_table) - 1); + + sh_msiof_write(p, TSCR, sh_msiof_spi_clk_table[k].scr); + sh_msiof_write(p, RSCR, sh_msiof_spi_clk_table[k].scr); +} + +static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p, + u32 cpol, u32 cpha, + u32 tx_hi_z, u32 lsb_first) +{ + u32 tmp; + int edge; + + /* + * CPOL CPHA TSCKIZ RSCKIZ TEDG REDG + * 0 0 10 10 1 1 + * 0 1 10 10 0 0 + * 1 0 11 11 0 0 + * 1 1 11 11 1 1 + */ + sh_msiof_write(p, FCTR, 0); + sh_msiof_write(p, TMDR1, 0xe2000005 | (lsb_first << 24)); + sh_msiof_write(p, RMDR1, 0x22000005 | (lsb_first << 24)); + + tmp = 0xa0000000; + tmp |= cpol << 30; /* TSCKIZ */ + tmp |= cpol << 28; /* RSCKIZ */ + + edge = cpol ^ !cpha; + + tmp |= edge << 27; /* TEDG */ + tmp |= edge << 26; /* REDG */ + tmp |= (tx_hi_z ? 2 : 0) << 22; /* TXDIZ */ + sh_msiof_write(p, CTR, tmp); +} + +static void sh_msiof_spi_set_mode_regs(struct sh_msiof_spi_priv *p, + const void *tx_buf, void *rx_buf, + u32 bits, u32 words) +{ + u32 dr2 = ((bits - 1) << 24) | ((words - 1) << 16); + + if (tx_buf) + sh_msiof_write(p, TMDR2, dr2); + else + sh_msiof_write(p, TMDR2, dr2 | 1); + + if (rx_buf) + sh_msiof_write(p, RMDR2, dr2); + + sh_msiof_write(p, IER, STR_TEOF | STR_REOF); +} + +static void sh_msiof_reset_str(struct sh_msiof_spi_priv *p) +{ + sh_msiof_write(p, STR, sh_msiof_read(p, STR)); +} + +static void sh_msiof_spi_write_fifo_8(struct sh_msiof_spi_priv *p, + const void *tx_buf, int words, int fs) +{ + const u8 *buf_8 = tx_buf; + int k; + + for (k = 0; k < words; k++) + sh_msiof_write(p, TFDR, buf_8[k] << fs); +} + +static void sh_msiof_spi_write_fifo_16(struct sh_msiof_spi_priv *p, + const void *tx_buf, int words, int fs) +{ + const u16 *buf_16 = tx_buf; + int k; + + for (k = 0; k < words; k++) + sh_msiof_write(p, TFDR, buf_16[k] << fs); +} + +static void sh_msiof_spi_write_fifo_16u(struct sh_msiof_spi_priv *p, + const void *tx_buf, int words, int fs) +{ + const u16 *buf_16 = tx_buf; + int k; + + for (k = 0; k < words; k++) + sh_msiof_write(p, TFDR, get_unaligned(&buf_16[k]) << fs); +} + +static void sh_msiof_spi_write_fifo_32(struct sh_msiof_spi_priv *p, + const void *tx_buf, int words, int fs) +{ + const u32 *buf_32 = tx_buf; + int k; + + for (k = 0; k < words; k++) + sh_msiof_write(p, TFDR, buf_32[k] << fs); +} + +static void sh_msiof_spi_write_fifo_32u(struct sh_msiof_spi_priv *p, + const void *tx_buf, int words, int fs) +{ + const u32 *buf_32 = tx_buf; + int k; + + for (k = 0; k < words; k++) + sh_msiof_write(p, TFDR, get_unaligned(&buf_32[k]) << fs); +} + +static void sh_msiof_spi_write_fifo_s32(struct sh_msiof_spi_priv *p, + const void *tx_buf, int words, int fs) +{ + const u32 *buf_32 = tx_buf; + int k; + + for (k = 0; k < words; k++) + sh_msiof_write(p, TFDR, swab32(buf_32[k] << fs)); +} + +static void sh_msiof_spi_write_fifo_s32u(struct sh_msiof_spi_priv *p, + const void *tx_buf, int words, int fs) +{ + const u32 *buf_32 = tx_buf; + int k; + + for (k = 0; k < words; k++) + sh_msiof_write(p, TFDR, swab32(get_unaligned(&buf_32[k]) << fs)); +} + +static void sh_msiof_spi_read_fifo_8(struct sh_msiof_spi_priv *p, + void *rx_buf, int words, int fs) +{ + u8 *buf_8 = rx_buf; + int k; + + for (k = 0; k < words; k++) + buf_8[k] = sh_msiof_read(p, RFDR) >> fs; +} + +static void sh_msiof_spi_read_fifo_16(struct sh_msiof_spi_priv *p, + void *rx_buf, int words, int fs) +{ + u16 *buf_16 = rx_buf; + int k; + + for (k = 0; k < words; k++) + buf_16[k] = sh_msiof_read(p, RFDR) >> fs; +} + +static void sh_msiof_spi_read_fifo_16u(struct sh_msiof_spi_priv *p, + void *rx_buf, int words, int fs) +{ + u16 *buf_16 = rx_buf; + int k; + + for (k = 0; k < words; k++) + put_unaligned(sh_msiof_read(p, RFDR) >> fs, &buf_16[k]); +} + +static void sh_msiof_spi_read_fifo_32(struct sh_msiof_spi_priv *p, + void *rx_buf, int words, int fs) +{ + u32 *buf_32 = rx_buf; + int k; + + for (k = 0; k < words; k++) + buf_32[k] = sh_msiof_read(p, RFDR) >> fs; +} + +static void sh_msiof_spi_read_fifo_32u(struct sh_msiof_spi_priv *p, + void *rx_buf, int words, int fs) +{ + u32 *buf_32 = rx_buf; + int k; + + for (k = 0; k < words; k++) + put_unaligned(sh_msiof_read(p, RFDR) >> fs, &buf_32[k]); +} + +static void sh_msiof_spi_read_fifo_s32(struct sh_msiof_spi_priv *p, + void *rx_buf, int words, int fs) +{ + u32 *buf_32 = rx_buf; + int k; + + for (k = 0; k < words; k++) + buf_32[k] = swab32(sh_msiof_read(p, RFDR) >> fs); +} + +static void sh_msiof_spi_read_fifo_s32u(struct sh_msiof_spi_priv *p, + void *rx_buf, int words, int fs) +{ + u32 *buf_32 = rx_buf; + int k; + + for (k = 0; k < words; k++) + put_unaligned(swab32(sh_msiof_read(p, RFDR) >> fs), &buf_32[k]); +} + +static int sh_msiof_spi_bits(struct spi_device *spi, struct spi_transfer *t) +{ + int bits; + + bits = t ? t->bits_per_word : 0; + if (!bits) + bits = spi->bits_per_word; + return bits; +} + +static unsigned long sh_msiof_spi_hz(struct spi_device *spi, + struct spi_transfer *t) +{ + unsigned long hz; + + hz = t ? t->speed_hz : 0; + if (!hz) + hz = spi->max_speed_hz; + return hz; +} + +static int sh_msiof_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + int bits; + + /* noting to check hz values against since parent clock is disabled */ + + bits = sh_msiof_spi_bits(spi, t); + if (bits < 8) + return -EINVAL; + if (bits > 32) + return -EINVAL; + + return spi_bitbang_setup_transfer(spi, t); +} + +static void sh_msiof_spi_chipselect(struct spi_device *spi, int is_on) +{ + struct sh_msiof_spi_priv *p = spi_master_get_devdata(spi->master); + int value; + + /* chip select is active low unless SPI_CS_HIGH is set */ + if (spi->mode & SPI_CS_HIGH) + value = (is_on == BITBANG_CS_ACTIVE) ? 1 : 0; + else + value = (is_on == BITBANG_CS_ACTIVE) ? 0 : 1; + + if (is_on == BITBANG_CS_ACTIVE) { + if (!test_and_set_bit(0, &p->flags)) { + pm_runtime_get_sync(&p->pdev->dev); + clk_enable(p->clk); + } + + /* Configure pins before asserting CS */ + sh_msiof_spi_set_pin_regs(p, !!(spi->mode & SPI_CPOL), + !!(spi->mode & SPI_CPHA), + !!(spi->mode & SPI_3WIRE), + !!(spi->mode & SPI_LSB_FIRST)); + } + + /* use spi->controller data for CS (same strategy as spi_gpio) */ + gpio_set_value((unsigned)spi->controller_data, value); + + if (is_on == BITBANG_CS_INACTIVE) { + if (test_and_clear_bit(0, &p->flags)) { + clk_disable(p->clk); + pm_runtime_put(&p->pdev->dev); + } + } +} + +static int sh_msiof_spi_txrx_once(struct sh_msiof_spi_priv *p, + void (*tx_fifo)(struct sh_msiof_spi_priv *, + const void *, int, int), + void (*rx_fifo)(struct sh_msiof_spi_priv *, + void *, int, int), + const void *tx_buf, void *rx_buf, + int words, int bits) +{ + int fifo_shift; + int ret; + + /* limit maximum word transfer to rx/tx fifo size */ + if (tx_buf) + words = min_t(int, words, p->tx_fifo_size); + if (rx_buf) + words = min_t(int, words, p->rx_fifo_size); + + /* the fifo contents need shifting */ + fifo_shift = 32 - bits; + + /* setup msiof transfer mode registers */ + sh_msiof_spi_set_mode_regs(p, tx_buf, rx_buf, bits, words); + + /* write tx fifo */ + if (tx_buf) + tx_fifo(p, tx_buf, words, fifo_shift); + + /* setup clock and rx/tx signals */ + ret = sh_msiof_modify_ctr_wait(p, 0, CTR_TSCKE); + if (rx_buf) + ret = ret ? ret : sh_msiof_modify_ctr_wait(p, 0, CTR_RXE); + ret = ret ? ret : sh_msiof_modify_ctr_wait(p, 0, CTR_TXE); + + /* start by setting frame bit */ + INIT_COMPLETION(p->done); + ret = ret ? ret : sh_msiof_modify_ctr_wait(p, 0, CTR_TFSE); + if (ret) { + dev_err(&p->pdev->dev, "failed to start hardware\n"); + goto err; + } + + /* wait for tx fifo to be emptied / rx fifo to be filled */ + wait_for_completion(&p->done); + + /* read rx fifo */ + if (rx_buf) + rx_fifo(p, rx_buf, words, fifo_shift); + + /* clear status bits */ + sh_msiof_reset_str(p); + + /* shut down frame, tx/tx and clock signals */ + ret = sh_msiof_modify_ctr_wait(p, CTR_TFSE, 0); + ret = ret ? ret : sh_msiof_modify_ctr_wait(p, CTR_TXE, 0); + if (rx_buf) + ret = ret ? ret : sh_msiof_modify_ctr_wait(p, CTR_RXE, 0); + ret = ret ? ret : sh_msiof_modify_ctr_wait(p, CTR_TSCKE, 0); + if (ret) { + dev_err(&p->pdev->dev, "failed to shut down hardware\n"); + goto err; + } + + return words; + + err: + sh_msiof_write(p, IER, 0); + return ret; +} + +static int sh_msiof_spi_txrx(struct spi_device *spi, struct spi_transfer *t) +{ + struct sh_msiof_spi_priv *p = spi_master_get_devdata(spi->master); + void (*tx_fifo)(struct sh_msiof_spi_priv *, const void *, int, int); + void (*rx_fifo)(struct sh_msiof_spi_priv *, void *, int, int); + int bits; + int bytes_per_word; + int bytes_done; + int words; + int n; + bool swab; + + bits = sh_msiof_spi_bits(spi, t); + + if (bits <= 8 && t->len > 15 && !(t->len & 3)) { + bits = 32; + swab = true; + } else { + swab = false; + } + + /* setup bytes per word and fifo read/write functions */ + if (bits <= 8) { + bytes_per_word = 1; + tx_fifo = sh_msiof_spi_write_fifo_8; + rx_fifo = sh_msiof_spi_read_fifo_8; + } else if (bits <= 16) { + bytes_per_word = 2; + if ((unsigned long)t->tx_buf & 0x01) + tx_fifo = sh_msiof_spi_write_fifo_16u; + else + tx_fifo = sh_msiof_spi_write_fifo_16; + + if ((unsigned long)t->rx_buf & 0x01) + rx_fifo = sh_msiof_spi_read_fifo_16u; + else + rx_fifo = sh_msiof_spi_read_fifo_16; + } else if (swab) { + bytes_per_word = 4; + if ((unsigned long)t->tx_buf & 0x03) + tx_fifo = sh_msiof_spi_write_fifo_s32u; + else + tx_fifo = sh_msiof_spi_write_fifo_s32; + + if ((unsigned long)t->rx_buf & 0x03) + rx_fifo = sh_msiof_spi_read_fifo_s32u; + else + rx_fifo = sh_msiof_spi_read_fifo_s32; + } else { + bytes_per_word = 4; + if ((unsigned long)t->tx_buf & 0x03) + tx_fifo = sh_msiof_spi_write_fifo_32u; + else + tx_fifo = sh_msiof_spi_write_fifo_32; + + if ((unsigned long)t->rx_buf & 0x03) + rx_fifo = sh_msiof_spi_read_fifo_32u; + else + rx_fifo = sh_msiof_spi_read_fifo_32; + } + + /* setup clocks (clock already enabled in chipselect()) */ + sh_msiof_spi_set_clk_regs(p, clk_get_rate(p->clk), + sh_msiof_spi_hz(spi, t)); + + /* transfer in fifo sized chunks */ + words = t->len / bytes_per_word; + bytes_done = 0; + + while (bytes_done < t->len) { + void *rx_buf = t->rx_buf ? t->rx_buf + bytes_done : NULL; + const void *tx_buf = t->tx_buf ? t->tx_buf + bytes_done : NULL; + n = sh_msiof_spi_txrx_once(p, tx_fifo, rx_fifo, + tx_buf, + rx_buf, + words, bits); + if (n < 0) + break; + + bytes_done += n * bytes_per_word; + words -= n; + } + + return bytes_done; +} + +static u32 sh_msiof_spi_txrx_word(struct spi_device *spi, unsigned nsecs, + u32 word, u8 bits) +{ + BUG(); /* unused but needed by bitbang code */ + return 0; +} + +static int sh_msiof_spi_probe(struct platform_device *pdev) +{ + struct resource *r; + struct spi_master *master; + struct sh_msiof_spi_priv *p; + char clk_name[16]; + int i; + int ret; + + master = spi_alloc_master(&pdev->dev, sizeof(struct sh_msiof_spi_priv)); + if (master == NULL) { + dev_err(&pdev->dev, "failed to allocate spi master\n"); + ret = -ENOMEM; + goto err0; + } + + p = spi_master_get_devdata(master); + + platform_set_drvdata(pdev, p); + p->info = pdev->dev.platform_data; + init_completion(&p->done); + + snprintf(clk_name, sizeof(clk_name), "msiof%d", pdev->id); + p->clk = clk_get(&pdev->dev, clk_name); + if (IS_ERR(p->clk)) { + dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); + ret = PTR_ERR(p->clk); + goto err1; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + i = platform_get_irq(pdev, 0); + if (!r || i < 0) { + dev_err(&pdev->dev, "cannot get platform resources\n"); + ret = -ENOENT; + goto err2; + } + p->mapbase = ioremap_nocache(r->start, resource_size(r)); + if (!p->mapbase) { + dev_err(&pdev->dev, "unable to ioremap\n"); + ret = -ENXIO; + goto err2; + } + + ret = request_irq(i, sh_msiof_spi_irq, IRQF_DISABLED, + dev_name(&pdev->dev), p); + if (ret) { + dev_err(&pdev->dev, "unable to request irq\n"); + goto err3; + } + + p->pdev = pdev; + pm_runtime_enable(&pdev->dev); + + /* The standard version of MSIOF use 64 word FIFOs */ + p->tx_fifo_size = 64; + p->rx_fifo_size = 64; + + /* Platform data may override FIFO sizes */ + if (p->info->tx_fifo_override) + p->tx_fifo_size = p->info->tx_fifo_override; + if (p->info->rx_fifo_override) + p->rx_fifo_size = p->info->rx_fifo_override; + + /* init master and bitbang code */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->mode_bits |= SPI_LSB_FIRST | SPI_3WIRE; + master->flags = 0; + master->bus_num = pdev->id; + master->num_chipselect = p->info->num_chipselect; + master->setup = spi_bitbang_setup; + master->cleanup = spi_bitbang_cleanup; + + p->bitbang.master = master; + p->bitbang.chipselect = sh_msiof_spi_chipselect; + p->bitbang.setup_transfer = sh_msiof_spi_setup_transfer; + p->bitbang.txrx_bufs = sh_msiof_spi_txrx; + p->bitbang.txrx_word[SPI_MODE_0] = sh_msiof_spi_txrx_word; + p->bitbang.txrx_word[SPI_MODE_1] = sh_msiof_spi_txrx_word; + p->bitbang.txrx_word[SPI_MODE_2] = sh_msiof_spi_txrx_word; + p->bitbang.txrx_word[SPI_MODE_3] = sh_msiof_spi_txrx_word; + + ret = spi_bitbang_start(&p->bitbang); + if (ret == 0) + return 0; + + pm_runtime_disable(&pdev->dev); + err3: + iounmap(p->mapbase); + err2: + clk_put(p->clk); + err1: + spi_master_put(master); + err0: + return ret; +} + +static int sh_msiof_spi_remove(struct platform_device *pdev) +{ + struct sh_msiof_spi_priv *p = platform_get_drvdata(pdev); + int ret; + + ret = spi_bitbang_stop(&p->bitbang); + if (!ret) { + pm_runtime_disable(&pdev->dev); + free_irq(platform_get_irq(pdev, 0), p); + iounmap(p->mapbase); + clk_put(p->clk); + spi_master_put(p->bitbang.master); + } + return ret; +} + +static int sh_msiof_spi_runtime_nop(struct device *dev) +{ + /* Runtime PM callback shared between ->runtime_suspend() + * and ->runtime_resume(). Simply returns success. + * + * This driver re-initializes all registers after + * pm_runtime_get_sync() anyway so there is no need + * to save and restore registers here. + */ + return 0; +} + +static struct dev_pm_ops sh_msiof_spi_dev_pm_ops = { + .runtime_suspend = sh_msiof_spi_runtime_nop, + .runtime_resume = sh_msiof_spi_runtime_nop, +}; + +static struct platform_driver sh_msiof_spi_drv = { + .probe = sh_msiof_spi_probe, + .remove = sh_msiof_spi_remove, + .driver = { + .name = "spi_sh_msiof", + .owner = THIS_MODULE, + .pm = &sh_msiof_spi_dev_pm_ops, + }, +}; + +static int __init sh_msiof_spi_init(void) +{ + return platform_driver_register(&sh_msiof_spi_drv); +} +module_init(sh_msiof_spi_init); + +static void __exit sh_msiof_spi_exit(void) +{ + platform_driver_unregister(&sh_msiof_spi_drv); +} +module_exit(sh_msiof_spi_exit); + +MODULE_DESCRIPTION("SuperH MSIOF SPI Master Interface Driver"); +MODULE_AUTHOR("Magnus Damm"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:spi_sh_msiof"); diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c new file mode 100644 index 000000000000..e7779c09f6ef --- /dev/null +++ b/drivers/spi/spi-sh-sci.c @@ -0,0 +1,205 @@ +/* + * SH SCI SPI interface + * + * Copyright (c) 2008 Magnus Damm + * + * Based on S3C24XX GPIO based SPI driver, which is: + * Copyright (c) 2006 Ben Dooks + * Copyright (c) 2006 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +struct sh_sci_spi { + struct spi_bitbang bitbang; + + void __iomem *membase; + unsigned char val; + struct sh_spi_info *info; + struct platform_device *dev; +}; + +#define SCSPTR(sp) (sp->membase + 0x1c) +#define PIN_SCK (1 << 2) +#define PIN_TXD (1 << 0) +#define PIN_RXD PIN_TXD +#define PIN_INIT ((1 << 1) | (1 << 3) | PIN_SCK | PIN_TXD) + +static inline void setbits(struct sh_sci_spi *sp, int bits, int on) +{ + /* + * We are the only user of SCSPTR so no locking is required. + * Reading bit 2 and 0 in SCSPTR gives pin state as input. + * Writing the same bits sets the output value. + * This makes regular read-modify-write difficult so we + * use sp->val to keep track of the latest register value. + */ + + if (on) + sp->val |= bits; + else + sp->val &= ~bits; + + iowrite8(sp->val, SCSPTR(sp)); +} + +static inline void setsck(struct spi_device *dev, int on) +{ + setbits(spi_master_get_devdata(dev->master), PIN_SCK, on); +} + +static inline void setmosi(struct spi_device *dev, int on) +{ + setbits(spi_master_get_devdata(dev->master), PIN_TXD, on); +} + +static inline u32 getmiso(struct spi_device *dev) +{ + struct sh_sci_spi *sp = spi_master_get_devdata(dev->master); + + return (ioread8(SCSPTR(sp)) & PIN_RXD) ? 1 : 0; +} + +#define spidelay(x) ndelay(x) + +#include "spi-bitbang-txrx.h" + +static u32 sh_sci_spi_txrx_mode0(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); +} + +static u32 sh_sci_spi_txrx_mode1(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); +} + +static u32 sh_sci_spi_txrx_mode2(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); +} + +static u32 sh_sci_spi_txrx_mode3(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); +} + +static void sh_sci_spi_chipselect(struct spi_device *dev, int value) +{ + struct sh_sci_spi *sp = spi_master_get_devdata(dev->master); + + if (sp->info && sp->info->chip_select) + (sp->info->chip_select)(sp->info, dev->chip_select, value); +} + +static int sh_sci_spi_probe(struct platform_device *dev) +{ + struct resource *r; + struct spi_master *master; + struct sh_sci_spi *sp; + int ret; + + master = spi_alloc_master(&dev->dev, sizeof(struct sh_sci_spi)); + if (master == NULL) { + dev_err(&dev->dev, "failed to allocate spi master\n"); + ret = -ENOMEM; + goto err0; + } + + sp = spi_master_get_devdata(master); + + platform_set_drvdata(dev, sp); + sp->info = dev->dev.platform_data; + + /* setup spi bitbang adaptor */ + sp->bitbang.master = spi_master_get(master); + sp->bitbang.master->bus_num = sp->info->bus_num; + sp->bitbang.master->num_chipselect = sp->info->num_chipselect; + sp->bitbang.chipselect = sh_sci_spi_chipselect; + + sp->bitbang.txrx_word[SPI_MODE_0] = sh_sci_spi_txrx_mode0; + sp->bitbang.txrx_word[SPI_MODE_1] = sh_sci_spi_txrx_mode1; + sp->bitbang.txrx_word[SPI_MODE_2] = sh_sci_spi_txrx_mode2; + sp->bitbang.txrx_word[SPI_MODE_3] = sh_sci_spi_txrx_mode3; + + r = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (r == NULL) { + ret = -ENOENT; + goto err1; + } + sp->membase = ioremap(r->start, resource_size(r)); + if (!sp->membase) { + ret = -ENXIO; + goto err1; + } + sp->val = ioread8(SCSPTR(sp)); + setbits(sp, PIN_INIT, 1); + + ret = spi_bitbang_start(&sp->bitbang); + if (!ret) + return 0; + + setbits(sp, PIN_INIT, 0); + iounmap(sp->membase); + err1: + spi_master_put(sp->bitbang.master); + err0: + return ret; +} + +static int sh_sci_spi_remove(struct platform_device *dev) +{ + struct sh_sci_spi *sp = platform_get_drvdata(dev); + + iounmap(sp->membase); + setbits(sp, PIN_INIT, 0); + spi_bitbang_stop(&sp->bitbang); + spi_master_put(sp->bitbang.master); + return 0; +} + +static struct platform_driver sh_sci_spi_drv = { + .probe = sh_sci_spi_probe, + .remove = sh_sci_spi_remove, + .driver = { + .name = "spi_sh_sci", + .owner = THIS_MODULE, + }, +}; + +static int __init sh_sci_spi_init(void) +{ + return platform_driver_register(&sh_sci_spi_drv); +} +module_init(sh_sci_spi_init); + +static void __exit sh_sci_spi_exit(void) +{ + platform_driver_unregister(&sh_sci_spi_drv); +} +module_exit(sh_sci_spi_exit); + +MODULE_DESCRIPTION("SH SCI SPI Driver"); +MODULE_AUTHOR("Magnus Damm "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:spi_sh_sci"); diff --git a/drivers/spi/spi-sh.c b/drivers/spi/spi-sh.c new file mode 100644 index 000000000000..9eedd71ad898 --- /dev/null +++ b/drivers/spi/spi-sh.c @@ -0,0 +1,543 @@ +/* + * SH SPI bus driver + * + * Copyright (C) 2011 Renesas Solutions Corp. + * + * Based on pxa2xx_spi.c: + * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SPI_SH_TBR 0x00 +#define SPI_SH_RBR 0x00 +#define SPI_SH_CR1 0x08 +#define SPI_SH_CR2 0x10 +#define SPI_SH_CR3 0x18 +#define SPI_SH_CR4 0x20 +#define SPI_SH_CR5 0x28 + +/* CR1 */ +#define SPI_SH_TBE 0x80 +#define SPI_SH_TBF 0x40 +#define SPI_SH_RBE 0x20 +#define SPI_SH_RBF 0x10 +#define SPI_SH_PFONRD 0x08 +#define SPI_SH_SSDB 0x04 +#define SPI_SH_SSD 0x02 +#define SPI_SH_SSA 0x01 + +/* CR2 */ +#define SPI_SH_RSTF 0x80 +#define SPI_SH_LOOPBK 0x40 +#define SPI_SH_CPOL 0x20 +#define SPI_SH_CPHA 0x10 +#define SPI_SH_L1M0 0x08 + +/* CR3 */ +#define SPI_SH_MAX_BYTE 0xFF + +/* CR4 */ +#define SPI_SH_TBEI 0x80 +#define SPI_SH_TBFI 0x40 +#define SPI_SH_RBEI 0x20 +#define SPI_SH_RBFI 0x10 +#define SPI_SH_WPABRT 0x04 +#define SPI_SH_SSS 0x01 + +/* CR8 */ +#define SPI_SH_P1L0 0x80 +#define SPI_SH_PP1L0 0x40 +#define SPI_SH_MUXI 0x20 +#define SPI_SH_MUXIRQ 0x10 + +#define SPI_SH_FIFO_SIZE 32 +#define SPI_SH_SEND_TIMEOUT (3 * HZ) +#define SPI_SH_RECEIVE_TIMEOUT (HZ >> 3) + +#undef DEBUG + +struct spi_sh_data { + void __iomem *addr; + int irq; + struct spi_master *master; + struct list_head queue; + struct workqueue_struct *workqueue; + struct work_struct ws; + unsigned long cr1; + wait_queue_head_t wait; + spinlock_t lock; +}; + +static void spi_sh_write(struct spi_sh_data *ss, unsigned long data, + unsigned long offset) +{ + writel(data, ss->addr + offset); +} + +static unsigned long spi_sh_read(struct spi_sh_data *ss, unsigned long offset) +{ + return readl(ss->addr + offset); +} + +static void spi_sh_set_bit(struct spi_sh_data *ss, unsigned long val, + unsigned long offset) +{ + unsigned long tmp; + + tmp = spi_sh_read(ss, offset); + tmp |= val; + spi_sh_write(ss, tmp, offset); +} + +static void spi_sh_clear_bit(struct spi_sh_data *ss, unsigned long val, + unsigned long offset) +{ + unsigned long tmp; + + tmp = spi_sh_read(ss, offset); + tmp &= ~val; + spi_sh_write(ss, tmp, offset); +} + +static void clear_fifo(struct spi_sh_data *ss) +{ + spi_sh_set_bit(ss, SPI_SH_RSTF, SPI_SH_CR2); + spi_sh_clear_bit(ss, SPI_SH_RSTF, SPI_SH_CR2); +} + +static int spi_sh_wait_receive_buffer(struct spi_sh_data *ss) +{ + int timeout = 100000; + + while (spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_RBE) { + udelay(10); + if (timeout-- < 0) + return -ETIMEDOUT; + } + return 0; +} + +static int spi_sh_wait_write_buffer_empty(struct spi_sh_data *ss) +{ + int timeout = 100000; + + while (!(spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_TBE)) { + udelay(10); + if (timeout-- < 0) + return -ETIMEDOUT; + } + return 0; +} + +static int spi_sh_send(struct spi_sh_data *ss, struct spi_message *mesg, + struct spi_transfer *t) +{ + int i, retval = 0; + int remain = t->len; + int cur_len; + unsigned char *data; + unsigned long tmp; + long ret; + + if (t->len) + spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1); + + data = (unsigned char *)t->tx_buf; + while (remain > 0) { + cur_len = min(SPI_SH_FIFO_SIZE, remain); + for (i = 0; i < cur_len && + !(spi_sh_read(ss, SPI_SH_CR4) & + SPI_SH_WPABRT) && + !(spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_TBF); + i++) + spi_sh_write(ss, (unsigned long)data[i], SPI_SH_TBR); + + if (spi_sh_read(ss, SPI_SH_CR4) & SPI_SH_WPABRT) { + /* Abort SPI operation */ + spi_sh_set_bit(ss, SPI_SH_WPABRT, SPI_SH_CR4); + retval = -EIO; + break; + } + + cur_len = i; + + remain -= cur_len; + data += cur_len; + + if (remain > 0) { + ss->cr1 &= ~SPI_SH_TBE; + spi_sh_set_bit(ss, SPI_SH_TBE, SPI_SH_CR4); + ret = wait_event_interruptible_timeout(ss->wait, + ss->cr1 & SPI_SH_TBE, + SPI_SH_SEND_TIMEOUT); + if (ret == 0 && !(ss->cr1 & SPI_SH_TBE)) { + printk(KERN_ERR "%s: timeout\n", __func__); + return -ETIMEDOUT; + } + } + } + + if (list_is_last(&t->transfer_list, &mesg->transfers)) { + tmp = spi_sh_read(ss, SPI_SH_CR1); + tmp = tmp & ~(SPI_SH_SSD | SPI_SH_SSDB); + spi_sh_write(ss, tmp, SPI_SH_CR1); + spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1); + + ss->cr1 &= ~SPI_SH_TBE; + spi_sh_set_bit(ss, SPI_SH_TBE, SPI_SH_CR4); + ret = wait_event_interruptible_timeout(ss->wait, + ss->cr1 & SPI_SH_TBE, + SPI_SH_SEND_TIMEOUT); + if (ret == 0 && (ss->cr1 & SPI_SH_TBE)) { + printk(KERN_ERR "%s: timeout\n", __func__); + return -ETIMEDOUT; + } + } + + return retval; +} + +static int spi_sh_receive(struct spi_sh_data *ss, struct spi_message *mesg, + struct spi_transfer *t) +{ + int i; + int remain = t->len; + int cur_len; + unsigned char *data; + unsigned long tmp; + long ret; + + if (t->len > SPI_SH_MAX_BYTE) + spi_sh_write(ss, SPI_SH_MAX_BYTE, SPI_SH_CR3); + else + spi_sh_write(ss, t->len, SPI_SH_CR3); + + tmp = spi_sh_read(ss, SPI_SH_CR1); + tmp = tmp & ~(SPI_SH_SSD | SPI_SH_SSDB); + spi_sh_write(ss, tmp, SPI_SH_CR1); + spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1); + + spi_sh_wait_write_buffer_empty(ss); + + data = (unsigned char *)t->rx_buf; + while (remain > 0) { + if (remain >= SPI_SH_FIFO_SIZE) { + ss->cr1 &= ~SPI_SH_RBF; + spi_sh_set_bit(ss, SPI_SH_RBF, SPI_SH_CR4); + ret = wait_event_interruptible_timeout(ss->wait, + ss->cr1 & SPI_SH_RBF, + SPI_SH_RECEIVE_TIMEOUT); + if (ret == 0 && + spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_RBE) { + printk(KERN_ERR "%s: timeout\n", __func__); + return -ETIMEDOUT; + } + } + + cur_len = min(SPI_SH_FIFO_SIZE, remain); + for (i = 0; i < cur_len; i++) { + if (spi_sh_wait_receive_buffer(ss)) + break; + data[i] = (unsigned char)spi_sh_read(ss, SPI_SH_RBR); + } + + remain -= cur_len; + data += cur_len; + } + + /* deassert CS when SPI is receiving. */ + if (t->len > SPI_SH_MAX_BYTE) { + clear_fifo(ss); + spi_sh_write(ss, 1, SPI_SH_CR3); + } else { + spi_sh_write(ss, 0, SPI_SH_CR3); + } + + return 0; +} + +static void spi_sh_work(struct work_struct *work) +{ + struct spi_sh_data *ss = container_of(work, struct spi_sh_data, ws); + struct spi_message *mesg; + struct spi_transfer *t; + unsigned long flags; + int ret; + + pr_debug("%s: enter\n", __func__); + + spin_lock_irqsave(&ss->lock, flags); + while (!list_empty(&ss->queue)) { + mesg = list_entry(ss->queue.next, struct spi_message, queue); + list_del_init(&mesg->queue); + + spin_unlock_irqrestore(&ss->lock, flags); + list_for_each_entry(t, &mesg->transfers, transfer_list) { + pr_debug("tx_buf = %p, rx_buf = %p\n", + t->tx_buf, t->rx_buf); + pr_debug("len = %d, delay_usecs = %d\n", + t->len, t->delay_usecs); + + if (t->tx_buf) { + ret = spi_sh_send(ss, mesg, t); + if (ret < 0) + goto error; + } + if (t->rx_buf) { + ret = spi_sh_receive(ss, mesg, t); + if (ret < 0) + goto error; + } + mesg->actual_length += t->len; + } + spin_lock_irqsave(&ss->lock, flags); + + mesg->status = 0; + mesg->complete(mesg->context); + } + + clear_fifo(ss); + spi_sh_set_bit(ss, SPI_SH_SSD, SPI_SH_CR1); + udelay(100); + + spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD, + SPI_SH_CR1); + + clear_fifo(ss); + + spin_unlock_irqrestore(&ss->lock, flags); + + return; + + error: + mesg->status = ret; + mesg->complete(mesg->context); + + spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD, + SPI_SH_CR1); + clear_fifo(ss); + +} + +static int spi_sh_setup(struct spi_device *spi) +{ + struct spi_sh_data *ss = spi_master_get_devdata(spi->master); + + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + pr_debug("%s: enter\n", __func__); + + spi_sh_write(ss, 0xfe, SPI_SH_CR1); /* SPI sycle stop */ + spi_sh_write(ss, 0x00, SPI_SH_CR1); /* CR1 init */ + spi_sh_write(ss, 0x00, SPI_SH_CR3); /* CR3 init */ + + clear_fifo(ss); + + /* 1/8 clock */ + spi_sh_write(ss, spi_sh_read(ss, SPI_SH_CR2) | 0x07, SPI_SH_CR2); + udelay(10); + + return 0; +} + +static int spi_sh_transfer(struct spi_device *spi, struct spi_message *mesg) +{ + struct spi_sh_data *ss = spi_master_get_devdata(spi->master); + unsigned long flags; + + pr_debug("%s: enter\n", __func__); + pr_debug("\tmode = %02x\n", spi->mode); + + spin_lock_irqsave(&ss->lock, flags); + + mesg->actual_length = 0; + mesg->status = -EINPROGRESS; + + spi_sh_clear_bit(ss, SPI_SH_SSA, SPI_SH_CR1); + + list_add_tail(&mesg->queue, &ss->queue); + queue_work(ss->workqueue, &ss->ws); + + spin_unlock_irqrestore(&ss->lock, flags); + + return 0; +} + +static void spi_sh_cleanup(struct spi_device *spi) +{ + struct spi_sh_data *ss = spi_master_get_devdata(spi->master); + + pr_debug("%s: enter\n", __func__); + + spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD, + SPI_SH_CR1); +} + +static irqreturn_t spi_sh_irq(int irq, void *_ss) +{ + struct spi_sh_data *ss = (struct spi_sh_data *)_ss; + unsigned long cr1; + + cr1 = spi_sh_read(ss, SPI_SH_CR1); + if (cr1 & SPI_SH_TBE) + ss->cr1 |= SPI_SH_TBE; + if (cr1 & SPI_SH_TBF) + ss->cr1 |= SPI_SH_TBF; + if (cr1 & SPI_SH_RBE) + ss->cr1 |= SPI_SH_RBE; + if (cr1 & SPI_SH_RBF) + ss->cr1 |= SPI_SH_RBF; + + if (ss->cr1) { + spi_sh_clear_bit(ss, ss->cr1, SPI_SH_CR4); + wake_up(&ss->wait); + } + + return IRQ_HANDLED; +} + +static int __devexit spi_sh_remove(struct platform_device *pdev) +{ + struct spi_sh_data *ss = dev_get_drvdata(&pdev->dev); + + spi_unregister_master(ss->master); + destroy_workqueue(ss->workqueue); + free_irq(ss->irq, ss); + iounmap(ss->addr); + + return 0; +} + +static int __devinit spi_sh_probe(struct platform_device *pdev) +{ + struct resource *res; + struct spi_master *master; + struct spi_sh_data *ss; + int ret, irq; + + /* get base addr */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(res == NULL)) { + dev_err(&pdev->dev, "invalid resource\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "platform_get_irq error\n"); + return -ENODEV; + } + + master = spi_alloc_master(&pdev->dev, sizeof(struct spi_sh_data)); + if (master == NULL) { + dev_err(&pdev->dev, "spi_alloc_master error.\n"); + return -ENOMEM; + } + + ss = spi_master_get_devdata(master); + dev_set_drvdata(&pdev->dev, ss); + + ss->irq = irq; + ss->master = master; + ss->addr = ioremap(res->start, resource_size(res)); + if (ss->addr == NULL) { + dev_err(&pdev->dev, "ioremap error.\n"); + ret = -ENOMEM; + goto error1; + } + INIT_LIST_HEAD(&ss->queue); + spin_lock_init(&ss->lock); + INIT_WORK(&ss->ws, spi_sh_work); + init_waitqueue_head(&ss->wait); + ss->workqueue = create_singlethread_workqueue( + dev_name(master->dev.parent)); + if (ss->workqueue == NULL) { + dev_err(&pdev->dev, "create workqueue error\n"); + ret = -EBUSY; + goto error2; + } + + ret = request_irq(irq, spi_sh_irq, IRQF_DISABLED, "spi_sh", ss); + if (ret < 0) { + dev_err(&pdev->dev, "request_irq error\n"); + goto error3; + } + + master->num_chipselect = 2; + master->bus_num = pdev->id; + master->setup = spi_sh_setup; + master->transfer = spi_sh_transfer; + master->cleanup = spi_sh_cleanup; + + ret = spi_register_master(master); + if (ret < 0) { + printk(KERN_ERR "spi_register_master error.\n"); + goto error4; + } + + return 0; + + error4: + free_irq(irq, ss); + error3: + destroy_workqueue(ss->workqueue); + error2: + iounmap(ss->addr); + error1: + spi_master_put(master); + + return ret; +} + +static struct platform_driver spi_sh_driver = { + .probe = spi_sh_probe, + .remove = __devexit_p(spi_sh_remove), + .driver = { + .name = "sh_spi", + .owner = THIS_MODULE, + }, +}; + +static int __init spi_sh_init(void) +{ + return platform_driver_register(&spi_sh_driver); +} +module_init(spi_sh_init); + +static void __exit spi_sh_exit(void) +{ + platform_driver_unregister(&spi_sh_driver); +} +module_exit(spi_sh_exit); + +MODULE_DESCRIPTION("SH SPI bus driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Yoshihiro Shimoda"); +MODULE_ALIAS("platform:sh_spi"); diff --git a/drivers/spi/spi-stmp.c b/drivers/spi/spi-stmp.c new file mode 100644 index 000000000000..fadff76eb7e0 --- /dev/null +++ b/drivers/spi/spi-stmp.c @@ -0,0 +1,679 @@ +/* + * Freescale STMP378X SPI master driver + * + * Author: dmitry pervushin + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + + +/* 0 means DMA mode(recommended, default), !0 - PIO mode */ +static int pio; +static int clock; + +/* default timeout for busy waits is 2 seconds */ +#define STMP_SPI_TIMEOUT (2 * HZ) + +struct stmp_spi { + int id; + + void * __iomem regs; /* vaddr of the control registers */ + + int irq, err_irq; + u32 dma; + struct stmp3xxx_dma_descriptor d; + + u32 speed_khz; + u32 saved_timings; + u32 divider; + + struct clk *clk; + struct device *master_dev; + + struct work_struct work; + struct workqueue_struct *workqueue; + + /* lock protects queue access */ + spinlock_t lock; + struct list_head queue; + + struct completion done; +}; + +#define busy_wait(cond) \ + ({ \ + unsigned long end_jiffies = jiffies + STMP_SPI_TIMEOUT; \ + bool succeeded = false; \ + do { \ + if (cond) { \ + succeeded = true; \ + break; \ + } \ + cpu_relax(); \ + } while (time_before(jiffies, end_jiffies)); \ + succeeded; \ + }) + +/** + * stmp_spi_init_hw + * Initialize the SSP port + */ +static int stmp_spi_init_hw(struct stmp_spi *ss) +{ + int err = 0; + void *pins = ss->master_dev->platform_data; + + err = stmp3xxx_request_pin_group(pins, dev_name(ss->master_dev)); + if (err) + goto out; + + ss->clk = clk_get(NULL, "ssp"); + if (IS_ERR(ss->clk)) { + err = PTR_ERR(ss->clk); + goto out_free_pins; + } + clk_enable(ss->clk); + + stmp3xxx_reset_block(ss->regs, false); + stmp3xxx_dma_reset_channel(ss->dma); + + return 0; + +out_free_pins: + stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev)); +out: + return err; +} + +static void stmp_spi_release_hw(struct stmp_spi *ss) +{ + void *pins = ss->master_dev->platform_data; + + if (ss->clk && !IS_ERR(ss->clk)) { + clk_disable(ss->clk); + clk_put(ss->clk); + } + stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev)); +} + +static int stmp_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + u8 bits_per_word; + u32 hz; + struct stmp_spi *ss = spi_master_get_devdata(spi->master); + u16 rate; + + bits_per_word = spi->bits_per_word; + if (t && t->bits_per_word) + bits_per_word = t->bits_per_word; + + /* + * Calculate speed: + * - by default, use maximum speed from ssp clk + * - if device overrides it, use it + * - if transfer specifies other speed, use transfer's one + */ + hz = 1000 * ss->speed_khz / ss->divider; + if (spi->max_speed_hz) + hz = min(hz, spi->max_speed_hz); + if (t && t->speed_hz) + hz = min(hz, t->speed_hz); + + if (hz == 0) { + dev_err(&spi->dev, "Cannot continue with zero clock\n"); + return -EINVAL; + } + + if (bits_per_word != 8) { + dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", + __func__, bits_per_word); + return -EINVAL; + } + + dev_dbg(&spi->dev, "Requested clk rate = %uHz, max = %uHz/%d = %uHz\n", + hz, ss->speed_khz, ss->divider, + ss->speed_khz * 1000 / ss->divider); + + if (ss->speed_khz * 1000 / ss->divider < hz) { + dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n", + __func__, hz); + return -EINVAL; + } + + rate = 1000 * ss->speed_khz/ss->divider/hz; + + writel(BF(ss->divider, SSP_TIMING_CLOCK_DIVIDE) | + BF(rate - 1, SSP_TIMING_CLOCK_RATE), + HW_SSP_TIMING + ss->regs); + + writel(BF(1 /* mode SPI */, SSP_CTRL1_SSP_MODE) | + BF(4 /* 8 bits */, SSP_CTRL1_WORD_LENGTH) | + ((spi->mode & SPI_CPOL) ? BM_SSP_CTRL1_POLARITY : 0) | + ((spi->mode & SPI_CPHA) ? BM_SSP_CTRL1_PHASE : 0) | + (pio ? 0 : BM_SSP_CTRL1_DMA_ENABLE), + ss->regs + HW_SSP_CTRL1); + + return 0; +} + +static int stmp_spi_setup(struct spi_device *spi) +{ + /* spi_setup() does basic checks, + * stmp_spi_setup_transfer() does more later + */ + if (spi->bits_per_word != 8) { + dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", + __func__, spi->bits_per_word); + return -EINVAL; + } + return 0; +} + +static inline u32 stmp_spi_cs(unsigned cs) +{ + return ((cs & 1) ? BM_SSP_CTRL0_WAIT_FOR_CMD : 0) | + ((cs & 2) ? BM_SSP_CTRL0_WAIT_FOR_IRQ : 0); +} + +static int stmp_spi_txrx_dma(struct stmp_spi *ss, int cs, + unsigned char *buf, dma_addr_t dma_buf, int len, + int first, int last, bool write) +{ + u32 c0 = 0; + dma_addr_t spi_buf_dma = dma_buf; + int status = 0; + enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE; + + c0 |= (first ? BM_SSP_CTRL0_LOCK_CS : 0); + c0 |= (last ? BM_SSP_CTRL0_IGNORE_CRC : 0); + c0 |= (write ? 0 : BM_SSP_CTRL0_READ); + c0 |= BM_SSP_CTRL0_DATA_XFER; + + c0 |= stmp_spi_cs(cs); + + c0 |= BF(len, SSP_CTRL0_XFER_COUNT); + + if (!dma_buf) + spi_buf_dma = dma_map_single(ss->master_dev, buf, len, dir); + + ss->d.command->cmd = + BF(len, APBH_CHn_CMD_XFER_COUNT) | + BF(1, APBH_CHn_CMD_CMDWORDS) | + BM_APBH_CHn_CMD_WAIT4ENDCMD | + BM_APBH_CHn_CMD_IRQONCMPLT | + BF(write ? BV_APBH_CHn_CMD_COMMAND__DMA_READ : + BV_APBH_CHn_CMD_COMMAND__DMA_WRITE, + APBH_CHn_CMD_COMMAND); + ss->d.command->pio_words[0] = c0; + ss->d.command->buf_ptr = spi_buf_dma; + + stmp3xxx_dma_reset_channel(ss->dma); + stmp3xxx_dma_clear_interrupt(ss->dma); + stmp3xxx_dma_enable_interrupt(ss->dma); + init_completion(&ss->done); + stmp3xxx_dma_go(ss->dma, &ss->d, 1); + wait_for_completion(&ss->done); + + if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & BM_SSP_CTRL0_RUN)) + status = -ETIMEDOUT; + + if (!dma_buf) + dma_unmap_single(ss->master_dev, spi_buf_dma, len, dir); + + return status; +} + +static inline void stmp_spi_enable(struct stmp_spi *ss) +{ + stmp3xxx_setl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0); + stmp3xxx_clearl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0); +} + +static inline void stmp_spi_disable(struct stmp_spi *ss) +{ + stmp3xxx_clearl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0); + stmp3xxx_setl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0); +} + +static int stmp_spi_txrx_pio(struct stmp_spi *ss, int cs, + unsigned char *buf, int len, + bool first, bool last, bool write) +{ + if (first) + stmp_spi_enable(ss); + + stmp3xxx_setl(stmp_spi_cs(cs), ss->regs + HW_SSP_CTRL0); + + while (len--) { + if (last && len <= 0) + stmp_spi_disable(ss); + + stmp3xxx_clearl(BM_SSP_CTRL0_XFER_COUNT, + ss->regs + HW_SSP_CTRL0); + stmp3xxx_setl(1, ss->regs + HW_SSP_CTRL0); + + if (write) + stmp3xxx_clearl(BM_SSP_CTRL0_READ, + ss->regs + HW_SSP_CTRL0); + else + stmp3xxx_setl(BM_SSP_CTRL0_READ, + ss->regs + HW_SSP_CTRL0); + + /* Run! */ + stmp3xxx_setl(BM_SSP_CTRL0_RUN, ss->regs + HW_SSP_CTRL0); + + if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & + BM_SSP_CTRL0_RUN)) + break; + + if (write) + writel(*buf, ss->regs + HW_SSP_DATA); + + /* Set TRANSFER */ + stmp3xxx_setl(BM_SSP_CTRL0_DATA_XFER, ss->regs + HW_SSP_CTRL0); + + if (!write) { + if (busy_wait((readl(ss->regs + HW_SSP_STATUS) & + BM_SSP_STATUS_FIFO_EMPTY))) + break; + *buf = readl(ss->regs + HW_SSP_DATA) & 0xFF; + } + + if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & + BM_SSP_CTRL0_RUN)) + break; + + /* advance to the next byte */ + buf++; + } + + return len < 0 ? 0 : -ETIMEDOUT; +} + +static int stmp_spi_handle_message(struct stmp_spi *ss, struct spi_message *m) +{ + bool first, last; + struct spi_transfer *t, *tmp_t; + int status = 0; + int cs; + + cs = m->spi->chip_select; + + list_for_each_entry_safe(t, tmp_t, &m->transfers, transfer_list) { + + first = (&t->transfer_list == m->transfers.next); + last = (&t->transfer_list == m->transfers.prev); + + if (first || t->speed_hz || t->bits_per_word) + stmp_spi_setup_transfer(m->spi, t); + + /* reject "not last" transfers which request to change cs */ + if (t->cs_change && !last) { + dev_err(&m->spi->dev, + "Message with t->cs_change has been skipped\n"); + continue; + } + + if (t->tx_buf) { + status = pio ? + stmp_spi_txrx_pio(ss, cs, (void *)t->tx_buf, + t->len, first, last, true) : + stmp_spi_txrx_dma(ss, cs, (void *)t->tx_buf, + t->tx_dma, t->len, first, last, true); +#ifdef DEBUG + if (t->len < 0x10) + print_hex_dump_bytes("Tx ", + DUMP_PREFIX_OFFSET, + t->tx_buf, t->len); + else + pr_debug("Tx: %d bytes\n", t->len); +#endif + } + if (t->rx_buf) { + status = pio ? + stmp_spi_txrx_pio(ss, cs, t->rx_buf, + t->len, first, last, false) : + stmp_spi_txrx_dma(ss, cs, t->rx_buf, + t->rx_dma, t->len, first, last, false); +#ifdef DEBUG + if (t->len < 0x10) + print_hex_dump_bytes("Rx ", + DUMP_PREFIX_OFFSET, + t->rx_buf, t->len); + else + pr_debug("Rx: %d bytes\n", t->len); +#endif + } + + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (status) + break; + + } + return status; +} + +/** + * stmp_spi_handle - handle messages from the queue + */ +static void stmp_spi_handle(struct work_struct *w) +{ + struct stmp_spi *ss = container_of(w, struct stmp_spi, work); + unsigned long flags; + struct spi_message *m; + + spin_lock_irqsave(&ss->lock, flags); + while (!list_empty(&ss->queue)) { + m = list_entry(ss->queue.next, struct spi_message, queue); + list_del_init(&m->queue); + spin_unlock_irqrestore(&ss->lock, flags); + + m->status = stmp_spi_handle_message(ss, m); + m->complete(m->context); + + spin_lock_irqsave(&ss->lock, flags); + } + spin_unlock_irqrestore(&ss->lock, flags); + + return; +} + +/** + * stmp_spi_transfer - perform message transfer. + * Called indirectly from spi_async, queues all the messages to + * spi_handle_message. + * @spi: spi device + * @m: message to be queued + */ +static int stmp_spi_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct stmp_spi *ss = spi_master_get_devdata(spi->master); + unsigned long flags; + + m->status = -EINPROGRESS; + spin_lock_irqsave(&ss->lock, flags); + list_add_tail(&m->queue, &ss->queue); + queue_work(ss->workqueue, &ss->work); + spin_unlock_irqrestore(&ss->lock, flags); + return 0; +} + +static irqreturn_t stmp_spi_irq(int irq, void *dev_id) +{ + struct stmp_spi *ss = dev_id; + + stmp3xxx_dma_clear_interrupt(ss->dma); + complete(&ss->done); + return IRQ_HANDLED; +} + +static irqreturn_t stmp_spi_irq_err(int irq, void *dev_id) +{ + struct stmp_spi *ss = dev_id; + u32 c1, st; + + c1 = readl(ss->regs + HW_SSP_CTRL1); + st = readl(ss->regs + HW_SSP_STATUS); + dev_err(ss->master_dev, "%s: status = 0x%08X, c1 = 0x%08X\n", + __func__, st, c1); + stmp3xxx_clearl(c1 & 0xCCCC0000, ss->regs + HW_SSP_CTRL1); + + return IRQ_HANDLED; +} + +static int __devinit stmp_spi_probe(struct platform_device *dev) +{ + int err = 0; + struct spi_master *master; + struct stmp_spi *ss; + struct resource *r; + + master = spi_alloc_master(&dev->dev, sizeof(struct stmp_spi)); + if (master == NULL) { + err = -ENOMEM; + goto out0; + } + master->flags = SPI_MASTER_HALF_DUPLEX; + + ss = spi_master_get_devdata(master); + platform_set_drvdata(dev, master); + + /* Get resources(memory, IRQ) associated with the device */ + r = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (r == NULL) { + err = -ENODEV; + goto out_put_master; + } + ss->regs = ioremap(r->start, resource_size(r)); + if (!ss->regs) { + err = -EINVAL; + goto out_put_master; + } + + ss->master_dev = &dev->dev; + ss->id = dev->id; + + INIT_WORK(&ss->work, stmp_spi_handle); + INIT_LIST_HEAD(&ss->queue); + spin_lock_init(&ss->lock); + + ss->workqueue = create_singlethread_workqueue(dev_name(&dev->dev)); + if (!ss->workqueue) { + err = -ENXIO; + goto out_put_master; + } + master->transfer = stmp_spi_transfer; + master->setup = stmp_spi_setup; + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA; + + ss->irq = platform_get_irq(dev, 0); + if (ss->irq < 0) { + err = ss->irq; + goto out_put_master; + } + ss->err_irq = platform_get_irq(dev, 1); + if (ss->err_irq < 0) { + err = ss->err_irq; + goto out_put_master; + } + + r = platform_get_resource(dev, IORESOURCE_DMA, 0); + if (r == NULL) { + err = -ENODEV; + goto out_put_master; + } + + ss->dma = r->start; + err = stmp3xxx_dma_request(ss->dma, &dev->dev, dev_name(&dev->dev)); + if (err) + goto out_put_master; + + err = stmp3xxx_dma_allocate_command(ss->dma, &ss->d); + if (err) + goto out_free_dma; + + master->bus_num = dev->id; + master->num_chipselect = 1; + + /* SPI controller initializations */ + err = stmp_spi_init_hw(ss); + if (err) { + dev_dbg(&dev->dev, "cannot initialize hardware\n"); + goto out_free_dma_desc; + } + + if (clock) { + dev_info(&dev->dev, "clock rate forced to %d\n", clock); + clk_set_rate(ss->clk, clock); + } + ss->speed_khz = clk_get_rate(ss->clk); + ss->divider = 2; + dev_info(&dev->dev, "max possible speed %d = %ld/%d kHz\n", + ss->speed_khz, clk_get_rate(ss->clk), ss->divider); + + /* Register for SPI interrupt */ + err = request_irq(ss->irq, stmp_spi_irq, 0, + dev_name(&dev->dev), ss); + if (err) { + dev_dbg(&dev->dev, "request_irq failed, %d\n", err); + goto out_release_hw; + } + + /* ..and shared interrupt for all SSP controllers */ + err = request_irq(ss->err_irq, stmp_spi_irq_err, IRQF_SHARED, + dev_name(&dev->dev), ss); + if (err) { + dev_dbg(&dev->dev, "request_irq(error) failed, %d\n", err); + goto out_free_irq; + } + + err = spi_register_master(master); + if (err) { + dev_dbg(&dev->dev, "cannot register spi master, %d\n", err); + goto out_free_irq_2; + } + dev_info(&dev->dev, "at (mapped) 0x%08X, irq=%d, bus %d, %s mode\n", + (u32)ss->regs, ss->irq, master->bus_num, + pio ? "PIO" : "DMA"); + return 0; + +out_free_irq_2: + free_irq(ss->err_irq, ss); +out_free_irq: + free_irq(ss->irq, ss); +out_free_dma_desc: + stmp3xxx_dma_free_command(ss->dma, &ss->d); +out_free_dma: + stmp3xxx_dma_release(ss->dma); +out_release_hw: + stmp_spi_release_hw(ss); +out_put_master: + if (ss->workqueue) + destroy_workqueue(ss->workqueue); + if (ss->regs) + iounmap(ss->regs); + platform_set_drvdata(dev, NULL); + spi_master_put(master); +out0: + return err; +} + +static int __devexit stmp_spi_remove(struct platform_device *dev) +{ + struct stmp_spi *ss; + struct spi_master *master; + + master = platform_get_drvdata(dev); + if (master == NULL) + goto out0; + ss = spi_master_get_devdata(master); + + spi_unregister_master(master); + + free_irq(ss->err_irq, ss); + free_irq(ss->irq, ss); + stmp3xxx_dma_free_command(ss->dma, &ss->d); + stmp3xxx_dma_release(ss->dma); + stmp_spi_release_hw(ss); + destroy_workqueue(ss->workqueue); + iounmap(ss->regs); + spi_master_put(master); + platform_set_drvdata(dev, NULL); +out0: + return 0; +} + +#ifdef CONFIG_PM +static int stmp_spi_suspend(struct platform_device *pdev, pm_message_t pmsg) +{ + struct stmp_spi *ss; + struct spi_master *master; + + master = platform_get_drvdata(pdev); + ss = spi_master_get_devdata(master); + + ss->saved_timings = readl(HW_SSP_TIMING + ss->regs); + clk_disable(ss->clk); + + return 0; +} + +static int stmp_spi_resume(struct platform_device *pdev) +{ + struct stmp_spi *ss; + struct spi_master *master; + + master = platform_get_drvdata(pdev); + ss = spi_master_get_devdata(master); + + clk_enable(ss->clk); + stmp3xxx_reset_block(ss->regs, false); + writel(ss->saved_timings, ss->regs + HW_SSP_TIMING); + + return 0; +} + +#else +#define stmp_spi_suspend NULL +#define stmp_spi_resume NULL +#endif + +static struct platform_driver stmp_spi_driver = { + .probe = stmp_spi_probe, + .remove = __devexit_p(stmp_spi_remove), + .driver = { + .name = "stmp3xxx_ssp", + .owner = THIS_MODULE, + }, + .suspend = stmp_spi_suspend, + .resume = stmp_spi_resume, +}; + +static int __init stmp_spi_init(void) +{ + return platform_driver_register(&stmp_spi_driver); +} + +static void __exit stmp_spi_exit(void) +{ + platform_driver_unregister(&stmp_spi_driver); +} + +module_init(stmp_spi_init); +module_exit(stmp_spi_exit); +module_param(pio, int, S_IRUGO); +module_param(clock, int, S_IRUGO); +MODULE_AUTHOR("dmitry pervushin "); +MODULE_DESCRIPTION("STMP3xxx SPI/SSP driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-tegra.c b/drivers/spi/spi-tegra.c new file mode 100644 index 000000000000..6c3aa6ecaade --- /dev/null +++ b/drivers/spi/spi-tegra.c @@ -0,0 +1,618 @@ +/* + * Driver for Nvidia TEGRA spi controller. + * + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Erik Gilling + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#define SLINK_COMMAND 0x000 +#define SLINK_BIT_LENGTH(x) (((x) & 0x1f) << 0) +#define SLINK_WORD_SIZE(x) (((x) & 0x1f) << 5) +#define SLINK_BOTH_EN (1 << 10) +#define SLINK_CS_SW (1 << 11) +#define SLINK_CS_VALUE (1 << 12) +#define SLINK_CS_POLARITY (1 << 13) +#define SLINK_IDLE_SDA_DRIVE_LOW (0 << 16) +#define SLINK_IDLE_SDA_DRIVE_HIGH (1 << 16) +#define SLINK_IDLE_SDA_PULL_LOW (2 << 16) +#define SLINK_IDLE_SDA_PULL_HIGH (3 << 16) +#define SLINK_IDLE_SDA_MASK (3 << 16) +#define SLINK_CS_POLARITY1 (1 << 20) +#define SLINK_CK_SDA (1 << 21) +#define SLINK_CS_POLARITY2 (1 << 22) +#define SLINK_CS_POLARITY3 (1 << 23) +#define SLINK_IDLE_SCLK_DRIVE_LOW (0 << 24) +#define SLINK_IDLE_SCLK_DRIVE_HIGH (1 << 24) +#define SLINK_IDLE_SCLK_PULL_LOW (2 << 24) +#define SLINK_IDLE_SCLK_PULL_HIGH (3 << 24) +#define SLINK_IDLE_SCLK_MASK (3 << 24) +#define SLINK_M_S (1 << 28) +#define SLINK_WAIT (1 << 29) +#define SLINK_GO (1 << 30) +#define SLINK_ENB (1 << 31) + +#define SLINK_COMMAND2 0x004 +#define SLINK_LSBFE (1 << 0) +#define SLINK_SSOE (1 << 1) +#define SLINK_SPIE (1 << 4) +#define SLINK_BIDIROE (1 << 6) +#define SLINK_MODFEN (1 << 7) +#define SLINK_INT_SIZE(x) (((x) & 0x1f) << 8) +#define SLINK_CS_ACTIVE_BETWEEN (1 << 17) +#define SLINK_SS_EN_CS(x) (((x) & 0x3) << 18) +#define SLINK_SS_SETUP(x) (((x) & 0x3) << 20) +#define SLINK_FIFO_REFILLS_0 (0 << 22) +#define SLINK_FIFO_REFILLS_1 (1 << 22) +#define SLINK_FIFO_REFILLS_2 (2 << 22) +#define SLINK_FIFO_REFILLS_3 (3 << 22) +#define SLINK_FIFO_REFILLS_MASK (3 << 22) +#define SLINK_WAIT_PACK_INT(x) (((x) & 0x7) << 26) +#define SLINK_SPC0 (1 << 29) +#define SLINK_TXEN (1 << 30) +#define SLINK_RXEN (1 << 31) + +#define SLINK_STATUS 0x008 +#define SLINK_COUNT(val) (((val) >> 0) & 0x1f) +#define SLINK_WORD(val) (((val) >> 5) & 0x1f) +#define SLINK_BLK_CNT(val) (((val) >> 0) & 0xffff) +#define SLINK_MODF (1 << 16) +#define SLINK_RX_UNF (1 << 18) +#define SLINK_TX_OVF (1 << 19) +#define SLINK_TX_FULL (1 << 20) +#define SLINK_TX_EMPTY (1 << 21) +#define SLINK_RX_FULL (1 << 22) +#define SLINK_RX_EMPTY (1 << 23) +#define SLINK_TX_UNF (1 << 24) +#define SLINK_RX_OVF (1 << 25) +#define SLINK_TX_FLUSH (1 << 26) +#define SLINK_RX_FLUSH (1 << 27) +#define SLINK_SCLK (1 << 28) +#define SLINK_ERR (1 << 29) +#define SLINK_RDY (1 << 30) +#define SLINK_BSY (1 << 31) + +#define SLINK_MAS_DATA 0x010 +#define SLINK_SLAVE_DATA 0x014 + +#define SLINK_DMA_CTL 0x018 +#define SLINK_DMA_BLOCK_SIZE(x) (((x) & 0xffff) << 0) +#define SLINK_TX_TRIG_1 (0 << 16) +#define SLINK_TX_TRIG_4 (1 << 16) +#define SLINK_TX_TRIG_8 (2 << 16) +#define SLINK_TX_TRIG_16 (3 << 16) +#define SLINK_TX_TRIG_MASK (3 << 16) +#define SLINK_RX_TRIG_1 (0 << 18) +#define SLINK_RX_TRIG_4 (1 << 18) +#define SLINK_RX_TRIG_8 (2 << 18) +#define SLINK_RX_TRIG_16 (3 << 18) +#define SLINK_RX_TRIG_MASK (3 << 18) +#define SLINK_PACKED (1 << 20) +#define SLINK_PACK_SIZE_4 (0 << 21) +#define SLINK_PACK_SIZE_8 (1 << 21) +#define SLINK_PACK_SIZE_16 (2 << 21) +#define SLINK_PACK_SIZE_32 (3 << 21) +#define SLINK_PACK_SIZE_MASK (3 << 21) +#define SLINK_IE_TXC (1 << 26) +#define SLINK_IE_RXC (1 << 27) +#define SLINK_DMA_EN (1 << 31) + +#define SLINK_STATUS2 0x01c +#define SLINK_TX_FIFO_EMPTY_COUNT(val) (((val) & 0x3f) >> 0) +#define SLINK_RX_FIFO_FULL_COUNT(val) (((val) & 0x3f) >> 16) + +#define SLINK_TX_FIFO 0x100 +#define SLINK_RX_FIFO 0x180 + +static const unsigned long spi_tegra_req_sels[] = { + TEGRA_DMA_REQ_SEL_SL2B1, + TEGRA_DMA_REQ_SEL_SL2B2, + TEGRA_DMA_REQ_SEL_SL2B3, + TEGRA_DMA_REQ_SEL_SL2B4, +}; + +#define BB_LEN 32 + +struct spi_tegra_data { + struct spi_master *master; + struct platform_device *pdev; + spinlock_t lock; + + struct clk *clk; + void __iomem *base; + unsigned long phys; + + u32 cur_speed; + + struct list_head queue; + struct spi_transfer *cur; + unsigned cur_pos; + unsigned cur_len; + unsigned cur_bytes_per_word; + + /* The tegra spi controller has a bug which causes the first word + * in PIO transactions to be garbage. Since packed DMA transactions + * require transfers to be 4 byte aligned we need a bounce buffer + * for the generic case. + */ + struct tegra_dma_req rx_dma_req; + struct tegra_dma_channel *rx_dma; + u32 *rx_bb; + dma_addr_t rx_bb_phys; +}; + + +static inline unsigned long spi_tegra_readl(struct spi_tegra_data *tspi, + unsigned long reg) +{ + return readl(tspi->base + reg); +} + +static inline void spi_tegra_writel(struct spi_tegra_data *tspi, + unsigned long val, + unsigned long reg) +{ + writel(val, tspi->base + reg); +} + +static void spi_tegra_go(struct spi_tegra_data *tspi) +{ + unsigned long val; + + wmb(); + + val = spi_tegra_readl(tspi, SLINK_DMA_CTL); + val &= ~SLINK_DMA_BLOCK_SIZE(~0) & ~SLINK_DMA_EN; + val |= SLINK_DMA_BLOCK_SIZE(tspi->rx_dma_req.size / 4 - 1); + spi_tegra_writel(tspi, val, SLINK_DMA_CTL); + + tegra_dma_enqueue_req(tspi->rx_dma, &tspi->rx_dma_req); + + val |= SLINK_DMA_EN; + spi_tegra_writel(tspi, val, SLINK_DMA_CTL); +} + +static unsigned spi_tegra_fill_tx_fifo(struct spi_tegra_data *tspi, + struct spi_transfer *t) +{ + unsigned len = min(t->len - tspi->cur_pos, BB_LEN * + tspi->cur_bytes_per_word); + u8 *tx_buf = (u8 *)t->tx_buf + tspi->cur_pos; + int i, j; + unsigned long val; + + val = spi_tegra_readl(tspi, SLINK_COMMAND); + val &= ~SLINK_WORD_SIZE(~0); + val |= SLINK_WORD_SIZE(len / tspi->cur_bytes_per_word - 1); + spi_tegra_writel(tspi, val, SLINK_COMMAND); + + for (i = 0; i < len; i += tspi->cur_bytes_per_word) { + val = 0; + for (j = 0; j < tspi->cur_bytes_per_word; j++) + val |= tx_buf[i + j] << j * 8; + + spi_tegra_writel(tspi, val, SLINK_TX_FIFO); + } + + tspi->rx_dma_req.size = len / tspi->cur_bytes_per_word * 4; + + return len; +} + +static unsigned spi_tegra_drain_rx_fifo(struct spi_tegra_data *tspi, + struct spi_transfer *t) +{ + unsigned len = tspi->cur_len; + u8 *rx_buf = (u8 *)t->rx_buf + tspi->cur_pos; + int i, j; + unsigned long val; + + for (i = 0; i < len; i += tspi->cur_bytes_per_word) { + val = tspi->rx_bb[i / tspi->cur_bytes_per_word]; + for (j = 0; j < tspi->cur_bytes_per_word; j++) + rx_buf[i + j] = (val >> (j * 8)) & 0xff; + } + + return len; +} + +static void spi_tegra_start_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct spi_tegra_data *tspi = spi_master_get_devdata(spi->master); + u32 speed; + u8 bits_per_word; + unsigned long val; + + speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz; + bits_per_word = t->bits_per_word ? t->bits_per_word : + spi->bits_per_word; + + tspi->cur_bytes_per_word = (bits_per_word - 1) / 8 + 1; + + if (speed != tspi->cur_speed) + clk_set_rate(tspi->clk, speed); + + if (tspi->cur_speed == 0) + clk_enable(tspi->clk); + + tspi->cur_speed = speed; + + val = spi_tegra_readl(tspi, SLINK_COMMAND2); + val &= ~SLINK_SS_EN_CS(~0) | SLINK_RXEN | SLINK_TXEN; + if (t->rx_buf) + val |= SLINK_RXEN; + if (t->tx_buf) + val |= SLINK_TXEN; + val |= SLINK_SS_EN_CS(spi->chip_select); + val |= SLINK_SPIE; + spi_tegra_writel(tspi, val, SLINK_COMMAND2); + + val = spi_tegra_readl(tspi, SLINK_COMMAND); + val &= ~SLINK_BIT_LENGTH(~0); + val |= SLINK_BIT_LENGTH(bits_per_word - 1); + + /* FIXME: should probably control CS manually so that we can be sure + * it does not go low between transfer and to support delay_usecs + * correctly. + */ + val &= ~SLINK_IDLE_SCLK_MASK & ~SLINK_CK_SDA & ~SLINK_CS_SW; + + if (spi->mode & SPI_CPHA) + val |= SLINK_CK_SDA; + + if (spi->mode & SPI_CPOL) + val |= SLINK_IDLE_SCLK_DRIVE_HIGH; + else + val |= SLINK_IDLE_SCLK_DRIVE_LOW; + + val |= SLINK_M_S; + + spi_tegra_writel(tspi, val, SLINK_COMMAND); + + spi_tegra_writel(tspi, SLINK_RX_FLUSH | SLINK_TX_FLUSH, SLINK_STATUS); + + tspi->cur = t; + tspi->cur_pos = 0; + tspi->cur_len = spi_tegra_fill_tx_fifo(tspi, t); + + spi_tegra_go(tspi); +} + +static void spi_tegra_start_message(struct spi_device *spi, + struct spi_message *m) +{ + struct spi_transfer *t; + + m->actual_length = 0; + m->status = 0; + + t = list_first_entry(&m->transfers, struct spi_transfer, transfer_list); + spi_tegra_start_transfer(spi, t); +} + +static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req) +{ + struct spi_tegra_data *tspi = req->dev; + unsigned long flags; + struct spi_message *m; + struct spi_device *spi; + int timeout = 0; + unsigned long val; + + /* the SPI controller may come back with both the BSY and RDY bits + * set. In this case we need to wait for the BSY bit to clear so + * that we are sure the DMA is finished. 1000 reads was empirically + * determined to be long enough. + */ + while (timeout++ < 1000) { + if (!(spi_tegra_readl(tspi, SLINK_STATUS) & SLINK_BSY)) + break; + } + + spin_lock_irqsave(&tspi->lock, flags); + + val = spi_tegra_readl(tspi, SLINK_STATUS); + val |= SLINK_RDY; + spi_tegra_writel(tspi, val, SLINK_STATUS); + + m = list_first_entry(&tspi->queue, struct spi_message, queue); + + if (timeout >= 1000) + m->status = -EIO; + + spi = m->state; + + tspi->cur_pos += spi_tegra_drain_rx_fifo(tspi, tspi->cur); + m->actual_length += tspi->cur_pos; + + if (tspi->cur_pos < tspi->cur->len) { + tspi->cur_len = spi_tegra_fill_tx_fifo(tspi, tspi->cur); + spi_tegra_go(tspi); + } else if (!list_is_last(&tspi->cur->transfer_list, + &m->transfers)) { + tspi->cur = list_first_entry(&tspi->cur->transfer_list, + struct spi_transfer, + transfer_list); + spi_tegra_start_transfer(spi, tspi->cur); + } else { + list_del(&m->queue); + + m->complete(m->context); + + if (!list_empty(&tspi->queue)) { + m = list_first_entry(&tspi->queue, struct spi_message, + queue); + spi = m->state; + spi_tegra_start_message(spi, m); + } else { + clk_disable(tspi->clk); + tspi->cur_speed = 0; + } + } + + spin_unlock_irqrestore(&tspi->lock, flags); +} + +static int spi_tegra_setup(struct spi_device *spi) +{ + struct spi_tegra_data *tspi = spi_master_get_devdata(spi->master); + unsigned long cs_bit; + unsigned long val; + unsigned long flags; + + dev_dbg(&spi->dev, "setup %d bpw, %scpol, %scpha, %dHz\n", + spi->bits_per_word, + spi->mode & SPI_CPOL ? "" : "~", + spi->mode & SPI_CPHA ? "" : "~", + spi->max_speed_hz); + + + switch (spi->chip_select) { + case 0: + cs_bit = SLINK_CS_POLARITY; + break; + + case 1: + cs_bit = SLINK_CS_POLARITY1; + break; + + case 2: + cs_bit = SLINK_CS_POLARITY2; + break; + + case 4: + cs_bit = SLINK_CS_POLARITY3; + break; + + default: + return -EINVAL; + } + + spin_lock_irqsave(&tspi->lock, flags); + + val = spi_tegra_readl(tspi, SLINK_COMMAND); + if (spi->mode & SPI_CS_HIGH) + val |= cs_bit; + else + val &= ~cs_bit; + spi_tegra_writel(tspi, val, SLINK_COMMAND); + + spin_unlock_irqrestore(&tspi->lock, flags); + + return 0; +} + +static int spi_tegra_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct spi_tegra_data *tspi = spi_master_get_devdata(spi->master); + struct spi_transfer *t; + unsigned long flags; + int was_empty; + + if (list_empty(&m->transfers) || !m->complete) + return -EINVAL; + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->bits_per_word < 0 || t->bits_per_word > 32) + return -EINVAL; + + if (t->len == 0) + return -EINVAL; + + if (!t->rx_buf && !t->tx_buf) + return -EINVAL; + } + + m->state = spi; + + spin_lock_irqsave(&tspi->lock, flags); + was_empty = list_empty(&tspi->queue); + list_add_tail(&m->queue, &tspi->queue); + + if (was_empty) + spi_tegra_start_message(spi, m); + + spin_unlock_irqrestore(&tspi->lock, flags); + + return 0; +} + +static int __init spi_tegra_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct spi_tegra_data *tspi; + struct resource *r; + int ret; + + master = spi_alloc_master(&pdev->dev, sizeof *tspi); + if (master == NULL) { + dev_err(&pdev->dev, "master allocation failed\n"); + return -ENOMEM; + } + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + master->bus_num = pdev->id; + + master->setup = spi_tegra_setup; + master->transfer = spi_tegra_transfer; + master->num_chipselect = 4; + + dev_set_drvdata(&pdev->dev, master); + tspi = spi_master_get_devdata(master); + tspi->master = master; + tspi->pdev = pdev; + spin_lock_init(&tspi->lock); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + ret = -ENODEV; + goto err0; + } + + if (!request_mem_region(r->start, (r->end - r->start) + 1, + dev_name(&pdev->dev))) { + ret = -EBUSY; + goto err0; + } + + tspi->phys = r->start; + tspi->base = ioremap(r->start, r->end - r->start + 1); + if (!tspi->base) { + dev_err(&pdev->dev, "can't ioremap iomem\n"); + ret = -ENOMEM; + goto err1; + } + + tspi->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(tspi->clk)) { + dev_err(&pdev->dev, "can not get clock\n"); + ret = PTR_ERR(tspi->clk); + goto err2; + } + + INIT_LIST_HEAD(&tspi->queue); + + tspi->rx_dma = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT); + if (!tspi->rx_dma) { + dev_err(&pdev->dev, "can not allocate rx dma channel\n"); + ret = -ENODEV; + goto err3; + } + + tspi->rx_bb = dma_alloc_coherent(&pdev->dev, sizeof(u32) * BB_LEN, + &tspi->rx_bb_phys, GFP_KERNEL); + if (!tspi->rx_bb) { + dev_err(&pdev->dev, "can not allocate rx bounce buffer\n"); + ret = -ENOMEM; + goto err4; + } + + tspi->rx_dma_req.complete = tegra_spi_rx_dma_complete; + tspi->rx_dma_req.to_memory = 1; + tspi->rx_dma_req.dest_addr = tspi->rx_bb_phys; + tspi->rx_dma_req.dest_bus_width = 32; + tspi->rx_dma_req.source_addr = tspi->phys + SLINK_RX_FIFO; + tspi->rx_dma_req.source_bus_width = 32; + tspi->rx_dma_req.source_wrap = 4; + tspi->rx_dma_req.req_sel = spi_tegra_req_sels[pdev->id]; + tspi->rx_dma_req.dev = tspi; + + ret = spi_register_master(master); + + if (ret < 0) + goto err5; + + return ret; + +err5: + dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN, + tspi->rx_bb, tspi->rx_bb_phys); +err4: + tegra_dma_free_channel(tspi->rx_dma); +err3: + clk_put(tspi->clk); +err2: + iounmap(tspi->base); +err1: + release_mem_region(r->start, (r->end - r->start) + 1); +err0: + spi_master_put(master); + return ret; +} + +static int __devexit spi_tegra_remove(struct platform_device *pdev) +{ + struct spi_master *master; + struct spi_tegra_data *tspi; + struct resource *r; + + master = dev_get_drvdata(&pdev->dev); + tspi = spi_master_get_devdata(master); + + spi_unregister_master(master); + tegra_dma_free_channel(tspi->rx_dma); + + dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN, + tspi->rx_bb, tspi->rx_bb_phys); + + clk_put(tspi->clk); + iounmap(tspi->base); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(r->start, (r->end - r->start) + 1); + + return 0; +} + +MODULE_ALIAS("platform:spi_tegra"); + +static struct platform_driver spi_tegra_driver = { + .driver = { + .name = "spi_tegra", + .owner = THIS_MODULE, + }, + .remove = __devexit_p(spi_tegra_remove), +}; + +static int __init spi_tegra_init(void) +{ + return platform_driver_probe(&spi_tegra_driver, spi_tegra_probe); +} +module_init(spi_tegra_init); + +static void __exit spi_tegra_exit(void) +{ + platform_driver_unregister(&spi_tegra_driver); +} +module_exit(spi_tegra_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-ti-ssp.c b/drivers/spi/spi-ti-ssp.c new file mode 100644 index 000000000000..ee22795c7973 --- /dev/null +++ b/drivers/spi/spi-ti-ssp.c @@ -0,0 +1,402 @@ +/* + * Sequencer Serial Port (SSP) based SPI master driver + * + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#define MODE_BITS (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH) + +struct ti_ssp_spi { + struct spi_master *master; + struct device *dev; + spinlock_t lock; + struct list_head msg_queue; + struct completion complete; + bool shutdown; + struct workqueue_struct *workqueue; + struct work_struct work; + u8 mode, bpw; + int cs_active; + u32 pc_en, pc_dis, pc_wr, pc_rd; + void (*select)(int cs); +}; + +static u32 ti_ssp_spi_rx(struct ti_ssp_spi *hw) +{ + u32 ret; + + ti_ssp_run(hw->dev, hw->pc_rd, 0, &ret); + return ret; +} + +static void ti_ssp_spi_tx(struct ti_ssp_spi *hw, u32 data) +{ + ti_ssp_run(hw->dev, hw->pc_wr, data << (32 - hw->bpw), NULL); +} + +static int ti_ssp_spi_txrx(struct ti_ssp_spi *hw, struct spi_message *msg, + struct spi_transfer *t) +{ + int count; + + if (hw->bpw <= 8) { + u8 *rx = t->rx_buf; + const u8 *tx = t->tx_buf; + + for (count = 0; count < t->len; count += 1) { + if (t->tx_buf) + ti_ssp_spi_tx(hw, *tx++); + if (t->rx_buf) + *rx++ = ti_ssp_spi_rx(hw); + } + } else if (hw->bpw <= 16) { + u16 *rx = t->rx_buf; + const u16 *tx = t->tx_buf; + + for (count = 0; count < t->len; count += 2) { + if (t->tx_buf) + ti_ssp_spi_tx(hw, *tx++); + if (t->rx_buf) + *rx++ = ti_ssp_spi_rx(hw); + } + } else { + u32 *rx = t->rx_buf; + const u32 *tx = t->tx_buf; + + for (count = 0; count < t->len; count += 4) { + if (t->tx_buf) + ti_ssp_spi_tx(hw, *tx++); + if (t->rx_buf) + *rx++ = ti_ssp_spi_rx(hw); + } + } + + msg->actual_length += count; /* bytes transferred */ + + dev_dbg(&msg->spi->dev, "xfer %s%s, %d bytes, %d bpw, count %d%s\n", + t->tx_buf ? "tx" : "", t->rx_buf ? "rx" : "", t->len, + hw->bpw, count, (count < t->len) ? " (under)" : ""); + + return (count < t->len) ? -EIO : 0; /* left over data */ +} + +static void ti_ssp_spi_chip_select(struct ti_ssp_spi *hw, int cs_active) +{ + cs_active = !!cs_active; + if (cs_active == hw->cs_active) + return; + ti_ssp_run(hw->dev, cs_active ? hw->pc_en : hw->pc_dis, 0, NULL); + hw->cs_active = cs_active; +} + +#define __SHIFT_OUT(bits) (SSP_OPCODE_SHIFT | SSP_OUT_MODE | \ + cs_en | clk | SSP_COUNT((bits) * 2 - 1)) +#define __SHIFT_IN(bits) (SSP_OPCODE_SHIFT | SSP_IN_MODE | \ + cs_en | clk | SSP_COUNT((bits) * 2 - 1)) + +static int ti_ssp_spi_setup_transfer(struct ti_ssp_spi *hw, u8 bpw, u8 mode) +{ + int error, idx = 0; + u32 seqram[16]; + u32 cs_en, cs_dis, clk; + u32 topbits, botbits; + + mode &= MODE_BITS; + if (mode == hw->mode && bpw == hw->bpw) + return 0; + + cs_en = (mode & SPI_CS_HIGH) ? SSP_CS_HIGH : SSP_CS_LOW; + cs_dis = (mode & SPI_CS_HIGH) ? SSP_CS_LOW : SSP_CS_HIGH; + clk = (mode & SPI_CPOL) ? SSP_CLK_HIGH : SSP_CLK_LOW; + + /* Construct instructions */ + + /* Disable Chip Select */ + hw->pc_dis = idx; + seqram[idx++] = SSP_OPCODE_DIRECT | SSP_OUT_MODE | cs_dis | clk; + seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_dis | clk; + + /* Enable Chip Select */ + hw->pc_en = idx; + seqram[idx++] = SSP_OPCODE_DIRECT | SSP_OUT_MODE | cs_en | clk; + seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_en | clk; + + /* Reads and writes need to be split for bpw > 16 */ + topbits = (bpw > 16) ? 16 : bpw; + botbits = bpw - topbits; + + /* Write */ + hw->pc_wr = idx; + seqram[idx++] = __SHIFT_OUT(topbits) | SSP_ADDR_REG; + if (botbits) + seqram[idx++] = __SHIFT_OUT(botbits) | SSP_DATA_REG; + seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_en | clk; + + /* Read */ + hw->pc_rd = idx; + if (botbits) + seqram[idx++] = __SHIFT_IN(botbits) | SSP_ADDR_REG; + seqram[idx++] = __SHIFT_IN(topbits) | SSP_DATA_REG; + seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_en | clk; + + error = ti_ssp_load(hw->dev, 0, seqram, idx); + if (error < 0) + return error; + + error = ti_ssp_set_mode(hw->dev, ((mode & SPI_CPHA) ? + 0 : SSP_EARLY_DIN)); + if (error < 0) + return error; + + hw->bpw = bpw; + hw->mode = mode; + + return error; +} + +static void ti_ssp_spi_work(struct work_struct *work) +{ + struct ti_ssp_spi *hw = container_of(work, struct ti_ssp_spi, work); + + spin_lock(&hw->lock); + + while (!list_empty(&hw->msg_queue)) { + struct spi_message *m; + struct spi_device *spi; + struct spi_transfer *t = NULL; + int status = 0; + + m = container_of(hw->msg_queue.next, struct spi_message, + queue); + + list_del_init(&m->queue); + + spin_unlock(&hw->lock); + + spi = m->spi; + + if (hw->select) + hw->select(spi->chip_select); + + list_for_each_entry(t, &m->transfers, transfer_list) { + int bpw = spi->bits_per_word; + int xfer_status; + + if (t->bits_per_word) + bpw = t->bits_per_word; + + if (ti_ssp_spi_setup_transfer(hw, bpw, spi->mode) < 0) + break; + + ti_ssp_spi_chip_select(hw, 1); + + xfer_status = ti_ssp_spi_txrx(hw, m, t); + if (xfer_status < 0) + status = xfer_status; + + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (t->cs_change) + ti_ssp_spi_chip_select(hw, 0); + } + + ti_ssp_spi_chip_select(hw, 0); + m->status = status; + m->complete(m->context); + + spin_lock(&hw->lock); + } + + if (hw->shutdown) + complete(&hw->complete); + + spin_unlock(&hw->lock); +} + +static int ti_ssp_spi_setup(struct spi_device *spi) +{ + if (spi->bits_per_word > 32) + return -EINVAL; + + return 0; +} + +static int ti_ssp_spi_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct ti_ssp_spi *hw; + struct spi_transfer *t; + int error = 0; + + m->actual_length = 0; + m->status = -EINPROGRESS; + + hw = spi_master_get_devdata(spi->master); + + if (list_empty(&m->transfers) || !m->complete) + return -EINVAL; + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->len && !(t->rx_buf || t->tx_buf)) { + dev_err(&spi->dev, "invalid xfer, no buffer\n"); + return -EINVAL; + } + + if (t->len && t->rx_buf && t->tx_buf) { + dev_err(&spi->dev, "invalid xfer, full duplex\n"); + return -EINVAL; + } + + if (t->bits_per_word > 32) { + dev_err(&spi->dev, "invalid xfer width %d\n", + t->bits_per_word); + return -EINVAL; + } + } + + spin_lock(&hw->lock); + if (hw->shutdown) { + error = -ESHUTDOWN; + goto error_unlock; + } + list_add_tail(&m->queue, &hw->msg_queue); + queue_work(hw->workqueue, &hw->work); +error_unlock: + spin_unlock(&hw->lock); + return error; +} + +static int __devinit ti_ssp_spi_probe(struct platform_device *pdev) +{ + const struct ti_ssp_spi_data *pdata; + struct ti_ssp_spi *hw; + struct spi_master *master; + struct device *dev = &pdev->dev; + int error = 0; + + pdata = dev->platform_data; + if (!pdata) { + dev_err(dev, "platform data not found\n"); + return -EINVAL; + } + + master = spi_alloc_master(dev, sizeof(struct ti_ssp_spi)); + if (!master) { + dev_err(dev, "cannot allocate SPI master\n"); + return -ENOMEM; + } + + hw = spi_master_get_devdata(master); + platform_set_drvdata(pdev, hw); + + hw->master = master; + hw->dev = dev; + hw->select = pdata->select; + + spin_lock_init(&hw->lock); + init_completion(&hw->complete); + INIT_LIST_HEAD(&hw->msg_queue); + INIT_WORK(&hw->work, ti_ssp_spi_work); + + hw->workqueue = create_singlethread_workqueue(dev_name(dev)); + if (!hw->workqueue) { + error = -ENOMEM; + dev_err(dev, "work queue creation failed\n"); + goto error_wq; + } + + error = ti_ssp_set_iosel(hw->dev, pdata->iosel); + if (error < 0) { + dev_err(dev, "io setup failed\n"); + goto error_iosel; + } + + master->bus_num = pdev->id; + master->num_chipselect = pdata->num_cs; + master->mode_bits = MODE_BITS; + master->flags = SPI_MASTER_HALF_DUPLEX; + master->setup = ti_ssp_spi_setup; + master->transfer = ti_ssp_spi_transfer; + + error = spi_register_master(master); + if (error) { + dev_err(dev, "master registration failed\n"); + goto error_reg; + } + + return 0; + +error_reg: +error_iosel: + destroy_workqueue(hw->workqueue); +error_wq: + spi_master_put(master); + return error; +} + +static int __devexit ti_ssp_spi_remove(struct platform_device *pdev) +{ + struct ti_ssp_spi *hw = platform_get_drvdata(pdev); + int error; + + hw->shutdown = 1; + while (!list_empty(&hw->msg_queue)) { + error = wait_for_completion_interruptible(&hw->complete); + if (error < 0) { + hw->shutdown = 0; + return error; + } + } + destroy_workqueue(hw->workqueue); + spi_unregister_master(hw->master); + + return 0; +} + +static struct platform_driver ti_ssp_spi_driver = { + .probe = ti_ssp_spi_probe, + .remove = __devexit_p(ti_ssp_spi_remove), + .driver = { + .name = "ti-ssp-spi", + .owner = THIS_MODULE, + }, +}; + +static int __init ti_ssp_spi_init(void) +{ + return platform_driver_register(&ti_ssp_spi_driver); +} +module_init(ti_ssp_spi_init); + +static void __exit ti_ssp_spi_exit(void) +{ + platform_driver_unregister(&ti_ssp_spi_driver); +} +module_exit(ti_ssp_spi_exit); + +MODULE_DESCRIPTION("SSP SPI Master"); +MODULE_AUTHOR("Cyril Chemparathy"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ti-ssp-spi"); diff --git a/drivers/spi/spi-tle62x0.c b/drivers/spi/spi-tle62x0.c new file mode 100644 index 000000000000..940e73d1cf09 --- /dev/null +++ b/drivers/spi/spi-tle62x0.c @@ -0,0 +1,334 @@ +/* + * Support Infineon TLE62x0 driver chips + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include + + +#define CMD_READ 0x00 +#define CMD_SET 0xff + +#define DIAG_NORMAL 0x03 +#define DIAG_OVERLOAD 0x02 +#define DIAG_OPEN 0x01 +#define DIAG_SHORTGND 0x00 + +struct tle62x0_state { + struct spi_device *us; + struct mutex lock; + unsigned int nr_gpio; + unsigned int gpio_state; + + unsigned char tx_buff[4]; + unsigned char rx_buff[4]; +}; + +static int to_gpio_num(struct device_attribute *attr); + +static inline int tle62x0_write(struct tle62x0_state *st) +{ + unsigned char *buff = st->tx_buff; + unsigned int gpio_state = st->gpio_state; + + buff[0] = CMD_SET; + + if (st->nr_gpio == 16) { + buff[1] = gpio_state >> 8; + buff[2] = gpio_state; + } else { + buff[1] = gpio_state; + } + + dev_dbg(&st->us->dev, "buff %02x,%02x,%02x\n", + buff[0], buff[1], buff[2]); + + return spi_write(st->us, buff, (st->nr_gpio == 16) ? 3 : 2); +} + +static inline int tle62x0_read(struct tle62x0_state *st) +{ + unsigned char *txbuff = st->tx_buff; + struct spi_transfer xfer = { + .tx_buf = txbuff, + .rx_buf = st->rx_buff, + .len = (st->nr_gpio * 2) / 8, + }; + struct spi_message msg; + + txbuff[0] = CMD_READ; + txbuff[1] = 0x00; + txbuff[2] = 0x00; + txbuff[3] = 0x00; + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + return spi_sync(st->us, &msg); +} + +static unsigned char *decode_fault(unsigned int fault_code) +{ + fault_code &= 3; + + switch (fault_code) { + case DIAG_NORMAL: + return "N"; + case DIAG_OVERLOAD: + return "V"; + case DIAG_OPEN: + return "O"; + case DIAG_SHORTGND: + return "G"; + } + + return "?"; +} + +static ssize_t tle62x0_status_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tle62x0_state *st = dev_get_drvdata(dev); + char *bp = buf; + unsigned char *buff = st->rx_buff; + unsigned long fault = 0; + int ptr; + int ret; + + mutex_lock(&st->lock); + ret = tle62x0_read(st); + dev_dbg(dev, "tle62x0_read() returned %d\n", ret); + if (ret < 0) { + mutex_unlock(&st->lock); + return ret; + } + + for (ptr = 0; ptr < (st->nr_gpio * 2)/8; ptr += 1) { + fault <<= 8; + fault |= ((unsigned long)buff[ptr]); + + dev_dbg(dev, "byte %d is %02x\n", ptr, buff[ptr]); + } + + for (ptr = 0; ptr < st->nr_gpio; ptr++) { + bp += sprintf(bp, "%s ", decode_fault(fault >> (ptr * 2))); + } + + *bp++ = '\n'; + + mutex_unlock(&st->lock); + return bp - buf; +} + +static DEVICE_ATTR(status_show, S_IRUGO, tle62x0_status_show, NULL); + +static ssize_t tle62x0_gpio_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tle62x0_state *st = dev_get_drvdata(dev); + int gpio_num = to_gpio_num(attr); + int value; + + mutex_lock(&st->lock); + value = (st->gpio_state >> gpio_num) & 1; + mutex_unlock(&st->lock); + + return snprintf(buf, PAGE_SIZE, "%d", value); +} + +static ssize_t tle62x0_gpio_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct tle62x0_state *st = dev_get_drvdata(dev); + int gpio_num = to_gpio_num(attr); + unsigned long val; + char *endp; + + val = simple_strtoul(buf, &endp, 0); + if (buf == endp) + return -EINVAL; + + dev_dbg(dev, "setting gpio %d to %ld\n", gpio_num, val); + + mutex_lock(&st->lock); + + if (val) + st->gpio_state |= 1 << gpio_num; + else + st->gpio_state &= ~(1 << gpio_num); + + tle62x0_write(st); + mutex_unlock(&st->lock); + + return len; +} + +static DEVICE_ATTR(gpio1, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio2, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio3, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio4, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio5, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio6, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio7, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio8, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio9, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio10, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio11, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio12, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio13, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio14, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio15, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); +static DEVICE_ATTR(gpio16, S_IWUSR|S_IRUGO, + tle62x0_gpio_show, tle62x0_gpio_store); + +static struct device_attribute *gpio_attrs[] = { + [0] = &dev_attr_gpio1, + [1] = &dev_attr_gpio2, + [2] = &dev_attr_gpio3, + [3] = &dev_attr_gpio4, + [4] = &dev_attr_gpio5, + [5] = &dev_attr_gpio6, + [6] = &dev_attr_gpio7, + [7] = &dev_attr_gpio8, + [8] = &dev_attr_gpio9, + [9] = &dev_attr_gpio10, + [10] = &dev_attr_gpio11, + [11] = &dev_attr_gpio12, + [12] = &dev_attr_gpio13, + [13] = &dev_attr_gpio14, + [14] = &dev_attr_gpio15, + [15] = &dev_attr_gpio16 +}; + +static int to_gpio_num(struct device_attribute *attr) +{ + int ptr; + + for (ptr = 0; ptr < ARRAY_SIZE(gpio_attrs); ptr++) { + if (gpio_attrs[ptr] == attr) + return ptr; + } + + return -1; +} + +static int __devinit tle62x0_probe(struct spi_device *spi) +{ + struct tle62x0_state *st; + struct tle62x0_pdata *pdata; + int ptr; + int ret; + + pdata = spi->dev.platform_data; + if (pdata == NULL) { + dev_err(&spi->dev, "no device data specified\n"); + return -EINVAL; + } + + st = kzalloc(sizeof(struct tle62x0_state), GFP_KERNEL); + if (st == NULL) { + dev_err(&spi->dev, "no memory for device state\n"); + return -ENOMEM; + } + + st->us = spi; + st->nr_gpio = pdata->gpio_count; + st->gpio_state = pdata->init_state; + + mutex_init(&st->lock); + + ret = device_create_file(&spi->dev, &dev_attr_status_show); + if (ret) { + dev_err(&spi->dev, "cannot create status attribute\n"); + goto err_status; + } + + for (ptr = 0; ptr < pdata->gpio_count; ptr++) { + ret = device_create_file(&spi->dev, gpio_attrs[ptr]); + if (ret) { + dev_err(&spi->dev, "cannot create gpio attribute\n"); + goto err_gpios; + } + } + + /* tle62x0_write(st); */ + spi_set_drvdata(spi, st); + return 0; + + err_gpios: + while (--ptr >= 0) + device_remove_file(&spi->dev, gpio_attrs[ptr]); + + device_remove_file(&spi->dev, &dev_attr_status_show); + + err_status: + kfree(st); + return ret; +} + +static int __devexit tle62x0_remove(struct spi_device *spi) +{ + struct tle62x0_state *st = spi_get_drvdata(spi); + int ptr; + + for (ptr = 0; ptr < st->nr_gpio; ptr++) + device_remove_file(&spi->dev, gpio_attrs[ptr]); + + device_remove_file(&spi->dev, &dev_attr_status_show); + kfree(st); + return 0; +} + +static struct spi_driver tle62x0_driver = { + .driver = { + .name = "tle62x0", + .owner = THIS_MODULE, + }, + .probe = tle62x0_probe, + .remove = __devexit_p(tle62x0_remove), +}; + +static __init int tle62x0_init(void) +{ + return spi_register_driver(&tle62x0_driver); +} + +static __exit void tle62x0_exit(void) +{ + spi_unregister_driver(&tle62x0_driver); +} + +module_init(tle62x0_init); +module_exit(tle62x0_exit); + +MODULE_AUTHOR("Ben Dooks "); +MODULE_DESCRIPTION("TLE62x0 SPI driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("spi:tle62x0"); diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c new file mode 100644 index 000000000000..79e48d451137 --- /dev/null +++ b/drivers/spi/spi-topcliff-pch.c @@ -0,0 +1,1303 @@ +/* + * SPI bus driver for the Topcliff PCH used by Intel SoCs + * + * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Register offsets */ +#define PCH_SPCR 0x00 /* SPI control register */ +#define PCH_SPBRR 0x04 /* SPI baud rate register */ +#define PCH_SPSR 0x08 /* SPI status register */ +#define PCH_SPDWR 0x0C /* SPI write data register */ +#define PCH_SPDRR 0x10 /* SPI read data register */ +#define PCH_SSNXCR 0x18 /* SSN Expand Control Register */ +#define PCH_SRST 0x1C /* SPI reset register */ + +#define PCH_SPSR_TFD 0x000007C0 +#define PCH_SPSR_RFD 0x0000F800 + +#define PCH_READABLE(x) (((x) & PCH_SPSR_RFD)>>11) +#define PCH_WRITABLE(x) (((x) & PCH_SPSR_TFD)>>6) + +#define PCH_RX_THOLD 7 +#define PCH_RX_THOLD_MAX 15 + +#define PCH_MAX_BAUDRATE 5000000 +#define PCH_MAX_FIFO_DEPTH 16 + +#define STATUS_RUNNING 1 +#define STATUS_EXITING 2 +#define PCH_SLEEP_TIME 10 + +#define PCH_ADDRESS_SIZE 0x20 + +#define SSN_LOW 0x02U +#define SSN_NO_CONTROL 0x00U +#define PCH_MAX_CS 0xFF +#define PCI_DEVICE_ID_GE_SPI 0x8816 + +#define SPCR_SPE_BIT (1 << 0) +#define SPCR_MSTR_BIT (1 << 1) +#define SPCR_LSBF_BIT (1 << 4) +#define SPCR_CPHA_BIT (1 << 5) +#define SPCR_CPOL_BIT (1 << 6) +#define SPCR_TFIE_BIT (1 << 8) +#define SPCR_RFIE_BIT (1 << 9) +#define SPCR_FIE_BIT (1 << 10) +#define SPCR_ORIE_BIT (1 << 11) +#define SPCR_MDFIE_BIT (1 << 12) +#define SPCR_FICLR_BIT (1 << 24) +#define SPSR_TFI_BIT (1 << 0) +#define SPSR_RFI_BIT (1 << 1) +#define SPSR_FI_BIT (1 << 2) +#define SPBRR_SIZE_BIT (1 << 10) + +#define PCH_ALL (SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|SPCR_ORIE_BIT|SPCR_MDFIE_BIT) + +#define SPCR_RFIC_FIELD 20 +#define SPCR_TFIC_FIELD 16 + +#define SPSR_INT_BITS 0x1F +#define MASK_SPBRR_SPBR_BITS (~((1 << 10) - 1)) +#define MASK_RFIC_SPCR_BITS (~(0xf << 20)) +#define MASK_TFIC_SPCR_BITS (~(0xf000f << 12)) + +#define PCH_CLOCK_HZ 50000000 +#define PCH_MAX_SPBR 1023 + + +/** + * struct pch_spi_data - Holds the SPI channel specific details + * @io_remap_addr: The remapped PCI base address + * @master: Pointer to the SPI master structure + * @work: Reference to work queue handler + * @wk: Workqueue for carrying out execution of the + * requests + * @wait: Wait queue for waking up upon receiving an + * interrupt. + * @transfer_complete: Status of SPI Transfer + * @bcurrent_msg_processing: Status flag for message processing + * @lock: Lock for protecting this structure + * @queue: SPI Message queue + * @status: Status of the SPI driver + * @bpw_len: Length of data to be transferred in bits per + * word + * @transfer_active: Flag showing active transfer + * @tx_index: Transmit data count; for bookkeeping during + * transfer + * @rx_index: Receive data count; for bookkeeping during + * transfer + * @tx_buff: Buffer for data to be transmitted + * @rx_index: Buffer for Received data + * @n_curnt_chip: The chip number that this SPI driver currently + * operates on + * @current_chip: Reference to the current chip that this SPI + * driver currently operates on + * @current_msg: The current message that this SPI driver is + * handling + * @cur_trans: The current transfer that this SPI driver is + * handling + * @board_dat: Reference to the SPI device data structure + */ +struct pch_spi_data { + void __iomem *io_remap_addr; + struct spi_master *master; + struct work_struct work; + struct workqueue_struct *wk; + wait_queue_head_t wait; + u8 transfer_complete; + u8 bcurrent_msg_processing; + spinlock_t lock; + struct list_head queue; + u8 status; + u32 bpw_len; + u8 transfer_active; + u32 tx_index; + u32 rx_index; + u16 *pkt_tx_buff; + u16 *pkt_rx_buff; + u8 n_curnt_chip; + struct spi_device *current_chip; + struct spi_message *current_msg; + struct spi_transfer *cur_trans; + struct pch_spi_board_data *board_dat; +}; + +/** + * struct pch_spi_board_data - Holds the SPI device specific details + * @pdev: Pointer to the PCI device + * @irq_reg_sts: Status of IRQ registration + * @pci_req_sts: Status of pci_request_regions + * @suspend_sts: Status of suspend + * @data: Pointer to SPI channel data structure + */ +struct pch_spi_board_data { + struct pci_dev *pdev; + u8 irq_reg_sts; + u8 pci_req_sts; + u8 suspend_sts; + struct pch_spi_data *data; +}; + +static struct pci_device_id pch_spi_pcidev_id[] = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_GE_SPI)}, + {0,} +}; + +/** + * pch_spi_writereg() - Performs register writes + * @master: Pointer to struct spi_master. + * @idx: Register offset. + * @val: Value to be written to register. + */ +static inline void pch_spi_writereg(struct spi_master *master, int idx, u32 val) +{ + struct pch_spi_data *data = spi_master_get_devdata(master); + iowrite32(val, (data->io_remap_addr + idx)); +} + +/** + * pch_spi_readreg() - Performs register reads + * @master: Pointer to struct spi_master. + * @idx: Register offset. + */ +static inline u32 pch_spi_readreg(struct spi_master *master, int idx) +{ + struct pch_spi_data *data = spi_master_get_devdata(master); + return ioread32(data->io_remap_addr + idx); +} + +static inline void pch_spi_setclr_reg(struct spi_master *master, int idx, + u32 set, u32 clr) +{ + u32 tmp = pch_spi_readreg(master, idx); + tmp = (tmp & ~clr) | set; + pch_spi_writereg(master, idx, tmp); +} + +static void pch_spi_set_master_mode(struct spi_master *master) +{ + pch_spi_setclr_reg(master, PCH_SPCR, SPCR_MSTR_BIT, 0); +} + +/** + * pch_spi_clear_fifo() - Clears the Transmit and Receive FIFOs + * @master: Pointer to struct spi_master. + */ +static void pch_spi_clear_fifo(struct spi_master *master) +{ + pch_spi_setclr_reg(master, PCH_SPCR, SPCR_FICLR_BIT, 0); + pch_spi_setclr_reg(master, PCH_SPCR, 0, SPCR_FICLR_BIT); +} + +static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, + void __iomem *io_remap_addr) +{ + u32 n_read, tx_index, rx_index, bpw_len; + u16 *pkt_rx_buffer, *pkt_tx_buff; + int read_cnt; + u32 reg_spcr_val; + void __iomem *spsr; + void __iomem *spdrr; + void __iomem *spdwr; + + spsr = io_remap_addr + PCH_SPSR; + iowrite32(reg_spsr_val, spsr); + + if (data->transfer_active) { + rx_index = data->rx_index; + tx_index = data->tx_index; + bpw_len = data->bpw_len; + pkt_rx_buffer = data->pkt_rx_buff; + pkt_tx_buff = data->pkt_tx_buff; + + spdrr = io_remap_addr + PCH_SPDRR; + spdwr = io_remap_addr + PCH_SPDWR; + + n_read = PCH_READABLE(reg_spsr_val); + + for (read_cnt = 0; (read_cnt < n_read); read_cnt++) { + pkt_rx_buffer[rx_index++] = ioread32(spdrr); + if (tx_index < bpw_len) + iowrite32(pkt_tx_buff[tx_index++], spdwr); + } + + /* disable RFI if not needed */ + if ((bpw_len - rx_index) <= PCH_MAX_FIFO_DEPTH) { + reg_spcr_val = ioread32(io_remap_addr + PCH_SPCR); + reg_spcr_val &= ~SPCR_RFIE_BIT; /* disable RFI */ + + /* reset rx threshold */ + reg_spcr_val &= MASK_RFIC_SPCR_BITS; + reg_spcr_val |= (PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD); + iowrite32(((reg_spcr_val) &= (~(SPCR_RFIE_BIT))), + (io_remap_addr + PCH_SPCR)); + } + + /* update counts */ + data->tx_index = tx_index; + data->rx_index = rx_index; + + } + + /* if transfer complete interrupt */ + if (reg_spsr_val & SPSR_FI_BIT) { + /* disable FI & RFI interrupts */ + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, + SPCR_FIE_BIT | SPCR_RFIE_BIT); + + /* transfer is completed;inform pch_spi_process_messages */ + data->transfer_complete = true; + wake_up(&data->wait); + } +} + +/** + * pch_spi_handler() - Interrupt handler + * @irq: The interrupt number. + * @dev_id: Pointer to struct pch_spi_board_data. + */ +static irqreturn_t pch_spi_handler(int irq, void *dev_id) +{ + u32 reg_spsr_val; + struct pch_spi_data *data; + void __iomem *spsr; + void __iomem *io_remap_addr; + irqreturn_t ret = IRQ_NONE; + struct pch_spi_board_data *board_dat = dev_id; + + if (board_dat->suspend_sts) { + dev_dbg(&board_dat->pdev->dev, + "%s returning due to suspend\n", __func__); + return IRQ_NONE; + } + + data = board_dat->data; + io_remap_addr = data->io_remap_addr; + spsr = io_remap_addr + PCH_SPSR; + + reg_spsr_val = ioread32(spsr); + + /* Check if the interrupt is for SPI device */ + if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) { + pch_spi_handler_sub(data, reg_spsr_val, io_remap_addr); + ret = IRQ_HANDLED; + } + + dev_dbg(&board_dat->pdev->dev, "%s EXIT return value=%d\n", + __func__, ret); + + return ret; +} + +/** + * pch_spi_set_baud_rate() - Sets SPBR field in SPBRR + * @master: Pointer to struct spi_master. + * @speed_hz: Baud rate. + */ +static void pch_spi_set_baud_rate(struct spi_master *master, u32 speed_hz) +{ + u32 n_spbr = PCH_CLOCK_HZ / (speed_hz * 2); + + /* if baud rate is less than we can support limit it */ + if (n_spbr > PCH_MAX_SPBR) + n_spbr = PCH_MAX_SPBR; + + pch_spi_setclr_reg(master, PCH_SPBRR, n_spbr, ~MASK_SPBRR_SPBR_BITS); +} + +/** + * pch_spi_set_bits_per_word() - Sets SIZE field in SPBRR + * @master: Pointer to struct spi_master. + * @bits_per_word: Bits per word for SPI transfer. + */ +static void pch_spi_set_bits_per_word(struct spi_master *master, + u8 bits_per_word) +{ + if (bits_per_word == 8) + pch_spi_setclr_reg(master, PCH_SPBRR, 0, SPBRR_SIZE_BIT); + else + pch_spi_setclr_reg(master, PCH_SPBRR, SPBRR_SIZE_BIT, 0); +} + +/** + * pch_spi_setup_transfer() - Configures the PCH SPI hardware for transfer + * @spi: Pointer to struct spi_device. + */ +static void pch_spi_setup_transfer(struct spi_device *spi) +{ + u32 flags = 0; + + dev_dbg(&spi->dev, "%s SPBRR content =%x setting baud rate=%d\n", + __func__, pch_spi_readreg(spi->master, PCH_SPBRR), + spi->max_speed_hz); + pch_spi_set_baud_rate(spi->master, spi->max_speed_hz); + + /* set bits per word */ + pch_spi_set_bits_per_word(spi->master, spi->bits_per_word); + + if (!(spi->mode & SPI_LSB_FIRST)) + flags |= SPCR_LSBF_BIT; + if (spi->mode & SPI_CPOL) + flags |= SPCR_CPOL_BIT; + if (spi->mode & SPI_CPHA) + flags |= SPCR_CPHA_BIT; + pch_spi_setclr_reg(spi->master, PCH_SPCR, flags, + (SPCR_LSBF_BIT | SPCR_CPOL_BIT | SPCR_CPHA_BIT)); + + /* Clear the FIFO by toggling FICLR to 1 and back to 0 */ + pch_spi_clear_fifo(spi->master); +} + +/** + * pch_spi_reset() - Clears SPI registers + * @master: Pointer to struct spi_master. + */ +static void pch_spi_reset(struct spi_master *master) +{ + /* write 1 to reset SPI */ + pch_spi_writereg(master, PCH_SRST, 0x1); + + /* clear reset */ + pch_spi_writereg(master, PCH_SRST, 0x0); +} + +static int pch_spi_setup(struct spi_device *pspi) +{ + /* check bits per word */ + if (pspi->bits_per_word == 0) { + pspi->bits_per_word = 8; + dev_dbg(&pspi->dev, "%s 8 bits per word\n", __func__); + } + + if ((pspi->bits_per_word != 8) && (pspi->bits_per_word != 16)) { + dev_err(&pspi->dev, "%s Invalid bits per word\n", __func__); + return -EINVAL; + } + + /* Check baud rate setting */ + /* if baud rate of chip is greater than + max we can support,return error */ + if ((pspi->max_speed_hz) > PCH_MAX_BAUDRATE) + pspi->max_speed_hz = PCH_MAX_BAUDRATE; + + dev_dbg(&pspi->dev, "%s MODE = %x\n", __func__, + (pspi->mode) & (SPI_CPOL | SPI_CPHA)); + + return 0; +} + +static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) +{ + + struct spi_transfer *transfer; + struct pch_spi_data *data = spi_master_get_devdata(pspi->master); + int retval; + unsigned long flags; + + /* validate spi message and baud rate */ + if (unlikely(list_empty(&pmsg->transfers) == 1)) { + dev_err(&pspi->dev, "%s list empty\n", __func__); + retval = -EINVAL; + goto err_out; + } + + if (unlikely(pspi->max_speed_hz == 0)) { + dev_err(&pspi->dev, "%s pch_spi_tranfer maxspeed=%d\n", + __func__, pspi->max_speed_hz); + retval = -EINVAL; + goto err_out; + } + + dev_dbg(&pspi->dev, "%s Transfer List not empty. " + "Transfer Speed is set.\n", __func__); + + /* validate Tx/Rx buffers and Transfer length */ + list_for_each_entry(transfer, &pmsg->transfers, transfer_list) { + if (!transfer->tx_buf && !transfer->rx_buf) { + dev_err(&pspi->dev, + "%s Tx and Rx buffer NULL\n", __func__); + retval = -EINVAL; + goto err_out; + } + + if (!transfer->len) { + dev_err(&pspi->dev, "%s Transfer length invalid\n", + __func__); + retval = -EINVAL; + goto err_out; + } + + dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length" + " valid\n", __func__); + + /* if baud rate hs been specified validate the same */ + if (transfer->speed_hz > PCH_MAX_BAUDRATE) + transfer->speed_hz = PCH_MAX_BAUDRATE; + + /* if bits per word has been specified validate the same */ + if (transfer->bits_per_word) { + if ((transfer->bits_per_word != 8) + && (transfer->bits_per_word != 16)) { + retval = -EINVAL; + dev_err(&pspi->dev, + "%s Invalid bits per word\n", __func__); + goto err_out; + } + } + } + + spin_lock_irqsave(&data->lock, flags); + + /* We won't process any messages if we have been asked to terminate */ + if (data->status == STATUS_EXITING) { + dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__); + retval = -ESHUTDOWN; + goto err_return_spinlock; + } + + /* If suspended ,return -EINVAL */ + if (data->board_dat->suspend_sts) { + dev_err(&pspi->dev, "%s suspend; returning EINVAL\n", __func__); + retval = -EINVAL; + goto err_return_spinlock; + } + + /* set status of message */ + pmsg->actual_length = 0; + dev_dbg(&pspi->dev, "%s - pmsg->status =%d\n", __func__, pmsg->status); + + pmsg->status = -EINPROGRESS; + + /* add message to queue */ + list_add_tail(&pmsg->queue, &data->queue); + dev_dbg(&pspi->dev, "%s - Invoked list_add_tail\n", __func__); + + /* schedule work queue to run */ + queue_work(data->wk, &data->work); + dev_dbg(&pspi->dev, "%s - Invoked queue work\n", __func__); + + retval = 0; + +err_return_spinlock: + spin_unlock_irqrestore(&data->lock, flags); +err_out: + dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval); + return retval; +} + +static inline void pch_spi_select_chip(struct pch_spi_data *data, + struct spi_device *pspi) +{ + if (data->current_chip != NULL) { + if (pspi->chip_select != data->n_curnt_chip) { + dev_dbg(&pspi->dev, "%s : different slave\n", __func__); + data->current_chip = NULL; + } + } + + data->current_chip = pspi; + + data->n_curnt_chip = data->current_chip->chip_select; + + dev_dbg(&pspi->dev, "%s :Invoking pch_spi_setup_transfer\n", __func__); + pch_spi_setup_transfer(pspi); +} + +static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, + struct spi_message **ppmsg) +{ + int size; + u32 n_writes; + int j; + struct spi_message *pmsg; + const u8 *tx_buf; + const u16 *tx_sbuf; + + pmsg = *ppmsg; + + /* set baud rate if needed */ + if (data->cur_trans->speed_hz) { + dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__); + pch_spi_set_baud_rate(data->master, data->cur_trans->speed_hz); + } + + /* set bits per word if needed */ + if (data->cur_trans->bits_per_word && + (data->current_msg->spi->bits_per_word != data->cur_trans->bits_per_word)) { + dev_dbg(&data->master->dev, "%s:set bits per word\n", __func__); + pch_spi_set_bits_per_word(data->master, + data->cur_trans->bits_per_word); + *bpw = data->cur_trans->bits_per_word; + } else { + *bpw = data->current_msg->spi->bits_per_word; + } + + /* reset Tx/Rx index */ + data->tx_index = 0; + data->rx_index = 0; + + data->bpw_len = data->cur_trans->len / (*bpw / 8); + + /* find alloc size */ + size = data->cur_trans->len * sizeof(*data->pkt_tx_buff); + + /* allocate memory for pkt_tx_buff & pkt_rx_buffer */ + data->pkt_tx_buff = kzalloc(size, GFP_KERNEL); + if (data->pkt_tx_buff != NULL) { + data->pkt_rx_buff = kzalloc(size, GFP_KERNEL); + if (!data->pkt_rx_buff) + kfree(data->pkt_tx_buff); + } + + if (!data->pkt_rx_buff) { + /* flush queue and set status of all transfers to -ENOMEM */ + dev_err(&data->master->dev, "%s :kzalloc failed\n", __func__); + list_for_each_entry(pmsg, data->queue.next, queue) { + pmsg->status = -ENOMEM; + + if (pmsg->complete != 0) + pmsg->complete(pmsg->context); + + /* delete from queue */ + list_del_init(&pmsg->queue); + } + return; + } + + /* copy Tx Data */ + if (data->cur_trans->tx_buf != NULL) { + if (*bpw == 8) { + tx_buf = data->cur_trans->tx_buf; + for (j = 0; j < data->bpw_len; j++) + data->pkt_tx_buff[j] = *tx_buf++; + } else { + tx_sbuf = data->cur_trans->tx_buf; + for (j = 0; j < data->bpw_len; j++) + data->pkt_tx_buff[j] = *tx_sbuf++; + } + } + + /* if len greater than PCH_MAX_FIFO_DEPTH, write 16,else len bytes */ + n_writes = data->bpw_len; + if (n_writes > PCH_MAX_FIFO_DEPTH) + n_writes = PCH_MAX_FIFO_DEPTH; + + dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing " + "0x2 to SSNXCR\n", __func__); + pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW); + + for (j = 0; j < n_writes; j++) + pch_spi_writereg(data->master, PCH_SPDWR, data->pkt_tx_buff[j]); + + /* update tx_index */ + data->tx_index = j; + + /* reset transfer complete flag */ + data->transfer_complete = false; + data->transfer_active = true; +} + + +static void pch_spi_nomore_transfer(struct pch_spi_data *data, + struct spi_message *pmsg) +{ + dev_dbg(&data->master->dev, "%s called\n", __func__); + /* Invoke complete callback + * [To the spi core..indicating end of transfer] */ + data->current_msg->status = 0; + + if (data->current_msg->complete != 0) { + dev_dbg(&data->master->dev, + "%s:Invoking callback of SPI core\n", __func__); + data->current_msg->complete(data->current_msg->context); + } + + /* update status in global variable */ + data->bcurrent_msg_processing = false; + + dev_dbg(&data->master->dev, + "%s:data->bcurrent_msg_processing = false\n", __func__); + + data->current_msg = NULL; + data->cur_trans = NULL; + + /* check if we have items in list and not suspending + * return 1 if list empty */ + if ((list_empty(&data->queue) == 0) && + (!data->board_dat->suspend_sts) && + (data->status != STATUS_EXITING)) { + /* We have some more work to do (either there is more tranint + * bpw;sfer requests in the current message or there are + *more messages) + */ + dev_dbg(&data->master->dev, "%s:Invoke queue_work\n", __func__); + queue_work(data->wk, &data->work); + } else if (data->board_dat->suspend_sts || + data->status == STATUS_EXITING) { + dev_dbg(&data->master->dev, + "%s suspend/remove initiated, flushing queue\n", + __func__); + list_for_each_entry(pmsg, data->queue.next, queue) { + pmsg->status = -EIO; + + if (pmsg->complete) + pmsg->complete(pmsg->context); + + /* delete from queue */ + list_del_init(&pmsg->queue); + } + } +} + +static void pch_spi_set_ir(struct pch_spi_data *data) +{ + /* enable interrupts */ + if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) { + /* set receive threshold to PCH_RX_THOLD */ + pch_spi_setclr_reg(data->master, PCH_SPCR, + PCH_RX_THOLD << SPCR_RFIC_FIELD, + ~MASK_RFIC_SPCR_BITS); + /* enable FI and RFI interrupts */ + pch_spi_setclr_reg(data->master, PCH_SPCR, + SPCR_RFIE_BIT | SPCR_FIE_BIT, 0); + } else { + /* set receive threshold to maximum */ + pch_spi_setclr_reg(data->master, PCH_SPCR, + PCH_RX_THOLD_MAX << SPCR_TFIC_FIELD, + ~MASK_TFIC_SPCR_BITS); + /* enable FI interrupt */ + pch_spi_setclr_reg(data->master, PCH_SPCR, SPCR_FIE_BIT, 0); + } + + dev_dbg(&data->master->dev, + "%s:invoking pch_spi_set_enable to enable SPI\n", __func__); + + /* SPI set enable */ + pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, SPCR_SPE_BIT, 0); + + /* Wait until the transfer completes; go to sleep after + initiating the transfer. */ + dev_dbg(&data->master->dev, + "%s:waiting for transfer to get over\n", __func__); + + wait_event_interruptible(data->wait, data->transfer_complete); + + pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL); + dev_dbg(&data->master->dev, + "%s:no more control over SSN-writing 0 to SSNXCR.", __func__); + + data->transfer_active = false; + dev_dbg(&data->master->dev, + "%s set data->transfer_active = false\n", __func__); + + /* clear all interrupts */ + pch_spi_writereg(data->master, PCH_SPSR, + pch_spi_readreg(data->master, PCH_SPSR)); + /* disable interrupts */ + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL); +} + +static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw) +{ + int j; + u8 *rx_buf; + u16 *rx_sbuf; + + /* copy Rx Data */ + if (!data->cur_trans->rx_buf) + return; + + if (bpw == 8) { + rx_buf = data->cur_trans->rx_buf; + for (j = 0; j < data->bpw_len; j++) + *rx_buf++ = data->pkt_rx_buff[j] & 0xFF; + } else { + rx_sbuf = data->cur_trans->rx_buf; + for (j = 0; j < data->bpw_len; j++) + *rx_sbuf++ = data->pkt_rx_buff[j]; + } +} + + +static void pch_spi_process_messages(struct work_struct *pwork) +{ + struct spi_message *pmsg; + struct pch_spi_data *data; + int bpw; + + data = container_of(pwork, struct pch_spi_data, work); + dev_dbg(&data->master->dev, "%s data initialized\n", __func__); + + spin_lock(&data->lock); + + /* check if suspend has been initiated;if yes flush queue */ + if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) { + dev_dbg(&data->master->dev, + "%s suspend/remove initiated,flushing queue\n", + __func__); + + list_for_each_entry(pmsg, data->queue.next, queue) { + pmsg->status = -EIO; + + if (pmsg->complete != 0) { + spin_unlock(&data->lock); + pmsg->complete(pmsg->context); + spin_lock(&data->lock); + } + + /* delete from queue */ + list_del_init(&pmsg->queue); + } + + spin_unlock(&data->lock); + return; + } + + data->bcurrent_msg_processing = true; + dev_dbg(&data->master->dev, + "%s Set data->bcurrent_msg_processing= true\n", __func__); + + /* Get the message from the queue and delete it from there. */ + data->current_msg = list_entry(data->queue.next, struct spi_message, + queue); + + list_del_init(&data->current_msg->queue); + + data->current_msg->status = 0; + + pch_spi_select_chip(data, data->current_msg->spi); + + spin_unlock(&data->lock); + + do { + /* If we are already processing a message get the next + transfer structure from the message otherwise retrieve + the 1st transfer request from the message. */ + spin_lock(&data->lock); + + if (data->cur_trans == NULL) { + data->cur_trans = + list_entry(data->current_msg->transfers. + next, struct spi_transfer, + transfer_list); + dev_dbg(&data->master->dev, + "%s :Getting 1st transfer message\n", __func__); + } else { + data->cur_trans = + list_entry(data->cur_trans->transfer_list.next, + struct spi_transfer, + transfer_list); + dev_dbg(&data->master->dev, + "%s :Getting next transfer message\n", + __func__); + } + + spin_unlock(&data->lock); + + pch_spi_set_tx(data, &bpw, &pmsg); + + /* Control interrupt*/ + pch_spi_set_ir(data); + + /* Disable SPI transfer */ + pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, 0, + SPCR_SPE_BIT); + + /* clear FIFO */ + pch_spi_clear_fifo(data->master); + + /* copy Rx Data */ + pch_spi_copy_rx_data(data, bpw); + + /* free memory */ + kfree(data->pkt_rx_buff); + data->pkt_rx_buff = NULL; + + kfree(data->pkt_tx_buff); + data->pkt_tx_buff = NULL; + + /* increment message count */ + data->current_msg->actual_length += data->cur_trans->len; + + dev_dbg(&data->master->dev, + "%s:data->current_msg->actual_length=%d\n", + __func__, data->current_msg->actual_length); + + /* check for delay */ + if (data->cur_trans->delay_usecs) { + dev_dbg(&data->master->dev, "%s:" + "delay in usec=%d\n", __func__, + data->cur_trans->delay_usecs); + udelay(data->cur_trans->delay_usecs); + } + + spin_lock(&data->lock); + + /* No more transfer in this message. */ + if ((data->cur_trans->transfer_list.next) == + &(data->current_msg->transfers)) { + pch_spi_nomore_transfer(data, pmsg); + } + + spin_unlock(&data->lock); + + } while (data->cur_trans != NULL); +} + +static void pch_spi_free_resources(struct pch_spi_board_data *board_dat) +{ + dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); + + /* free workqueue */ + if (board_dat->data->wk != NULL) { + destroy_workqueue(board_dat->data->wk); + board_dat->data->wk = NULL; + dev_dbg(&board_dat->pdev->dev, + "%s destroy_workqueue invoked successfully\n", + __func__); + } + + /* disable interrupts & free IRQ */ + if (board_dat->irq_reg_sts) { + /* disable interrupts */ + pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, + PCH_ALL); + + /* free IRQ */ + free_irq(board_dat->pdev->irq, board_dat); + + dev_dbg(&board_dat->pdev->dev, + "%s free_irq invoked successfully\n", __func__); + + board_dat->irq_reg_sts = false; + } + + /* unmap PCI base address */ + if (board_dat->data->io_remap_addr != 0) { + pci_iounmap(board_dat->pdev, board_dat->data->io_remap_addr); + + board_dat->data->io_remap_addr = 0; + + dev_dbg(&board_dat->pdev->dev, + "%s pci_iounmap invoked successfully\n", __func__); + } + + /* release PCI region */ + if (board_dat->pci_req_sts) { + pci_release_regions(board_dat->pdev); + dev_dbg(&board_dat->pdev->dev, + "%s pci_release_regions invoked successfully\n", + __func__); + board_dat->pci_req_sts = false; + } +} + +static int pch_spi_get_resources(struct pch_spi_board_data *board_dat) +{ + void __iomem *io_remap_addr; + int retval; + dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); + + /* create workqueue */ + board_dat->data->wk = create_singlethread_workqueue(KBUILD_MODNAME); + if (!board_dat->data->wk) { + dev_err(&board_dat->pdev->dev, + "%s create_singlet hread_workqueue failed\n", __func__); + retval = -EBUSY; + goto err_return; + } + + dev_dbg(&board_dat->pdev->dev, + "%s create_singlethread_workqueue success\n", __func__); + + retval = pci_request_regions(board_dat->pdev, KBUILD_MODNAME); + if (retval != 0) { + dev_err(&board_dat->pdev->dev, + "%s request_region failed\n", __func__); + goto err_return; + } + + board_dat->pci_req_sts = true; + + io_remap_addr = pci_iomap(board_dat->pdev, 1, 0); + if (io_remap_addr == 0) { + dev_err(&board_dat->pdev->dev, + "%s pci_iomap failed\n", __func__); + retval = -ENOMEM; + goto err_return; + } + + /* calculate base address for all channels */ + board_dat->data->io_remap_addr = io_remap_addr; + + /* reset PCH SPI h/w */ + pch_spi_reset(board_dat->data->master); + dev_dbg(&board_dat->pdev->dev, + "%s pch_spi_reset invoked successfully\n", __func__); + + /* register IRQ */ + retval = request_irq(board_dat->pdev->irq, pch_spi_handler, + IRQF_SHARED, KBUILD_MODNAME, board_dat); + if (retval != 0) { + dev_err(&board_dat->pdev->dev, + "%s request_irq failed\n", __func__); + goto err_return; + } + + dev_dbg(&board_dat->pdev->dev, "%s request_irq returned=%d\n", + __func__, retval); + + board_dat->irq_reg_sts = true; + dev_dbg(&board_dat->pdev->dev, "%s data->irq_reg_sts=true\n", __func__); + +err_return: + if (retval != 0) { + dev_err(&board_dat->pdev->dev, + "%s FAIL:invoking pch_spi_free_resources\n", __func__); + pch_spi_free_resources(board_dat); + } + + dev_dbg(&board_dat->pdev->dev, "%s Return=%d\n", __func__, retval); + + return retval; +} + +static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + + struct spi_master *master; + + struct pch_spi_board_data *board_dat; + int retval; + + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + /* allocate memory for private data */ + board_dat = kzalloc(sizeof(struct pch_spi_board_data), GFP_KERNEL); + if (board_dat == NULL) { + dev_err(&pdev->dev, + " %s memory allocation for private data failed\n", + __func__); + retval = -ENOMEM; + goto err_kmalloc; + } + + dev_dbg(&pdev->dev, + "%s memory allocation for private data success\n", __func__); + + /* enable PCI device */ + retval = pci_enable_device(pdev); + if (retval != 0) { + dev_err(&pdev->dev, "%s pci_enable_device FAILED\n", __func__); + + goto err_pci_en_device; + } + + dev_dbg(&pdev->dev, "%s pci_enable_device returned=%d\n", + __func__, retval); + + board_dat->pdev = pdev; + + /* alllocate memory for SPI master */ + master = spi_alloc_master(&pdev->dev, sizeof(struct pch_spi_data)); + if (master == NULL) { + retval = -ENOMEM; + dev_err(&pdev->dev, "%s Fail.\n", __func__); + goto err_spi_alloc_master; + } + + dev_dbg(&pdev->dev, + "%s spi_alloc_master returned non NULL\n", __func__); + + /* initialize members of SPI master */ + master->bus_num = -1; + master->num_chipselect = PCH_MAX_CS; + master->setup = pch_spi_setup; + master->transfer = pch_spi_transfer; + dev_dbg(&pdev->dev, + "%s transfer member of SPI master initialized\n", __func__); + + board_dat->data = spi_master_get_devdata(master); + + board_dat->data->master = master; + board_dat->data->n_curnt_chip = 255; + board_dat->data->board_dat = board_dat; + board_dat->data->status = STATUS_RUNNING; + + INIT_LIST_HEAD(&board_dat->data->queue); + spin_lock_init(&board_dat->data->lock); + INIT_WORK(&board_dat->data->work, pch_spi_process_messages); + init_waitqueue_head(&board_dat->data->wait); + + /* allocate resources for PCH SPI */ + retval = pch_spi_get_resources(board_dat); + if (retval) { + dev_err(&pdev->dev, "%s fail(retval=%d)\n", __func__, retval); + goto err_spi_get_resources; + } + + dev_dbg(&pdev->dev, "%s pch_spi_get_resources returned=%d\n", + __func__, retval); + + /* save private data in dev */ + pci_set_drvdata(pdev, board_dat); + dev_dbg(&pdev->dev, "%s invoked pci_set_drvdata\n", __func__); + + /* set master mode */ + pch_spi_set_master_mode(master); + dev_dbg(&pdev->dev, + "%s invoked pch_spi_set_master_mode\n", __func__); + + /* Register the controller with the SPI core. */ + retval = spi_register_master(master); + if (retval != 0) { + dev_err(&pdev->dev, + "%s spi_register_master FAILED\n", __func__); + goto err_spi_reg_master; + } + + dev_dbg(&pdev->dev, "%s spi_register_master returned=%d\n", + __func__, retval); + + + return 0; + +err_spi_reg_master: + spi_unregister_master(master); +err_spi_get_resources: +err_spi_alloc_master: + spi_master_put(master); + pci_disable_device(pdev); +err_pci_en_device: + kfree(board_dat); +err_kmalloc: + return retval; +} + +static void pch_spi_remove(struct pci_dev *pdev) +{ + struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); + int count; + + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + if (!board_dat) { + dev_err(&pdev->dev, + "%s pci_get_drvdata returned NULL\n", __func__); + return; + } + + /* check for any pending messages; no action is taken if the queue + * is still full; but at least we tried. Unload anyway */ + count = 500; + spin_lock(&board_dat->data->lock); + board_dat->data->status = STATUS_EXITING; + while ((list_empty(&board_dat->data->queue) == 0) && --count) { + dev_dbg(&board_dat->pdev->dev, "%s :queue not empty\n", + __func__); + spin_unlock(&board_dat->data->lock); + msleep(PCH_SLEEP_TIME); + spin_lock(&board_dat->data->lock); + } + spin_unlock(&board_dat->data->lock); + + /* Free resources allocated for PCH SPI */ + pch_spi_free_resources(board_dat); + + spi_unregister_master(board_dat->data->master); + + /* free memory for private data */ + kfree(board_dat); + + pci_set_drvdata(pdev, NULL); + + /* disable PCI device */ + pci_disable_device(pdev); + + dev_dbg(&pdev->dev, "%s invoked pci_disable_device\n", __func__); +} + +#ifdef CONFIG_PM +static int pch_spi_suspend(struct pci_dev *pdev, pm_message_t state) +{ + u8 count; + int retval; + + struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + if (!board_dat) { + dev_err(&pdev->dev, + "%s pci_get_drvdata returned NULL\n", __func__); + return -EFAULT; + } + + retval = 0; + board_dat->suspend_sts = true; + + /* check if the current message is processed: + Only after thats done the transfer will be suspended */ + count = 255; + while ((--count) > 0) { + if (!(board_dat->data->bcurrent_msg_processing)) { + dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_" + "msg_processing = false\n", __func__); + break; + } else { + dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_msg_" + "processing = true\n", __func__); + } + msleep(PCH_SLEEP_TIME); + } + + /* Free IRQ */ + if (board_dat->irq_reg_sts) { + /* disable all interrupts */ + pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, + PCH_ALL); + pch_spi_reset(board_dat->data->master); + + free_irq(board_dat->pdev->irq, board_dat); + + board_dat->irq_reg_sts = false; + dev_dbg(&pdev->dev, + "%s free_irq invoked successfully.\n", __func__); + } + + /* save config space */ + retval = pci_save_state(pdev); + + if (retval == 0) { + dev_dbg(&pdev->dev, "%s pci_save_state returned=%d\n", + __func__, retval); + /* disable PM notifications */ + pci_enable_wake(pdev, PCI_D3hot, 0); + dev_dbg(&pdev->dev, + "%s pci_enable_wake invoked successfully\n", __func__); + /* disable PCI device */ + pci_disable_device(pdev); + dev_dbg(&pdev->dev, + "%s pci_disable_device invoked successfully\n", + __func__); + /* move device to D3hot state */ + pci_set_power_state(pdev, PCI_D3hot); + dev_dbg(&pdev->dev, + "%s pci_set_power_state invoked successfully\n", + __func__); + } else { + dev_err(&pdev->dev, "%s pci_save_state failed\n", __func__); + } + + dev_dbg(&pdev->dev, "%s return=%d\n", __func__, retval); + + return retval; +} + +static int pch_spi_resume(struct pci_dev *pdev) +{ + int retval; + + struct pch_spi_board_data *board = pci_get_drvdata(pdev); + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + if (!board) { + dev_err(&pdev->dev, + "%s pci_get_drvdata returned NULL\n", __func__); + return -EFAULT; + } + + /* move device to DO power state */ + pci_set_power_state(pdev, PCI_D0); + + /* restore state */ + pci_restore_state(pdev); + + retval = pci_enable_device(pdev); + if (retval < 0) { + dev_err(&pdev->dev, + "%s pci_enable_device failed\n", __func__); + } else { + /* disable PM notifications */ + pci_enable_wake(pdev, PCI_D3hot, 0); + + /* register IRQ handler */ + if (!board->irq_reg_sts) { + /* register IRQ */ + retval = request_irq(board->pdev->irq, pch_spi_handler, + IRQF_SHARED, KBUILD_MODNAME, + board); + if (retval < 0) { + dev_err(&pdev->dev, + "%s request_irq failed\n", __func__); + return retval; + } + board->irq_reg_sts = true; + + /* reset PCH SPI h/w */ + pch_spi_reset(board->data->master); + pch_spi_set_master_mode(board->data->master); + + /* set suspend status to false */ + board->suspend_sts = false; + + } + } + + dev_dbg(&pdev->dev, "%s returning=%d\n", __func__, retval); + + return retval; +} +#else +#define pch_spi_suspend NULL +#define pch_spi_resume NULL + +#endif + +static struct pci_driver pch_spi_pcidev = { + .name = "pch_spi", + .id_table = pch_spi_pcidev_id, + .probe = pch_spi_probe, + .remove = pch_spi_remove, + .suspend = pch_spi_suspend, + .resume = pch_spi_resume, +}; + +static int __init pch_spi_init(void) +{ + return pci_register_driver(&pch_spi_pcidev); +} +module_init(pch_spi_init); + +static void __exit pch_spi_exit(void) +{ + pci_unregister_driver(&pch_spi_pcidev); +} +module_exit(pch_spi_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Topcliff PCH SPI PCI Driver"); diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c new file mode 100644 index 000000000000..f0a2ab0428a3 --- /dev/null +++ b/drivers/spi/spi-txx9.c @@ -0,0 +1,472 @@ +/* + * TXx9 SPI controller driver. + * + * Based on linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + * + * Convert to generic SPI framework - Atsushi Nemoto (anemo@mba.ocn.ne.jp) + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define SPI_FIFO_SIZE 4 +#define SPI_MAX_DIVIDER 0xff /* Max. value for SPCR1.SER */ +#define SPI_MIN_DIVIDER 1 /* Min. value for SPCR1.SER */ + +#define TXx9_SPMCR 0x00 +#define TXx9_SPCR0 0x04 +#define TXx9_SPCR1 0x08 +#define TXx9_SPFS 0x0c +#define TXx9_SPSR 0x14 +#define TXx9_SPDR 0x18 + +/* SPMCR : SPI Master Control */ +#define TXx9_SPMCR_OPMODE 0xc0 +#define TXx9_SPMCR_CONFIG 0x40 +#define TXx9_SPMCR_ACTIVE 0x80 +#define TXx9_SPMCR_SPSTP 0x02 +#define TXx9_SPMCR_BCLR 0x01 + +/* SPCR0 : SPI Control 0 */ +#define TXx9_SPCR0_TXIFL_MASK 0xc000 +#define TXx9_SPCR0_RXIFL_MASK 0x3000 +#define TXx9_SPCR0_SIDIE 0x0800 +#define TXx9_SPCR0_SOEIE 0x0400 +#define TXx9_SPCR0_RBSIE 0x0200 +#define TXx9_SPCR0_TBSIE 0x0100 +#define TXx9_SPCR0_IFSPSE 0x0010 +#define TXx9_SPCR0_SBOS 0x0004 +#define TXx9_SPCR0_SPHA 0x0002 +#define TXx9_SPCR0_SPOL 0x0001 + +/* SPSR : SPI Status */ +#define TXx9_SPSR_TBSI 0x8000 +#define TXx9_SPSR_RBSI 0x4000 +#define TXx9_SPSR_TBS_MASK 0x3800 +#define TXx9_SPSR_RBS_MASK 0x0700 +#define TXx9_SPSR_SPOE 0x0080 +#define TXx9_SPSR_IFSD 0x0008 +#define TXx9_SPSR_SIDLE 0x0004 +#define TXx9_SPSR_STRDY 0x0002 +#define TXx9_SPSR_SRRDY 0x0001 + + +struct txx9spi { + struct workqueue_struct *workqueue; + struct work_struct work; + spinlock_t lock; /* protect 'queue' */ + struct list_head queue; + wait_queue_head_t waitq; + void __iomem *membase; + int baseclk; + struct clk *clk; + u32 max_speed_hz, min_speed_hz; + int last_chipselect; + int last_chipselect_val; +}; + +static u32 txx9spi_rd(struct txx9spi *c, int reg) +{ + return __raw_readl(c->membase + reg); +} +static void txx9spi_wr(struct txx9spi *c, u32 val, int reg) +{ + __raw_writel(val, c->membase + reg); +} + +static void txx9spi_cs_func(struct spi_device *spi, struct txx9spi *c, + int on, unsigned int cs_delay) +{ + int val = (spi->mode & SPI_CS_HIGH) ? on : !on; + if (on) { + /* deselect the chip with cs_change hint in last transfer */ + if (c->last_chipselect >= 0) + gpio_set_value(c->last_chipselect, + !c->last_chipselect_val); + c->last_chipselect = spi->chip_select; + c->last_chipselect_val = val; + } else { + c->last_chipselect = -1; + ndelay(cs_delay); /* CS Hold Time */ + } + gpio_set_value(spi->chip_select, val); + ndelay(cs_delay); /* CS Setup Time / CS Recovery Time */ +} + +static int txx9spi_setup(struct spi_device *spi) +{ + struct txx9spi *c = spi_master_get_devdata(spi->master); + u8 bits_per_word; + + if (!spi->max_speed_hz + || spi->max_speed_hz > c->max_speed_hz + || spi->max_speed_hz < c->min_speed_hz) + return -EINVAL; + + bits_per_word = spi->bits_per_word; + if (bits_per_word != 8 && bits_per_word != 16) + return -EINVAL; + + if (gpio_direction_output(spi->chip_select, + !(spi->mode & SPI_CS_HIGH))) { + dev_err(&spi->dev, "Cannot setup GPIO for chipselect.\n"); + return -EINVAL; + } + + /* deselect chip */ + spin_lock(&c->lock); + txx9spi_cs_func(spi, c, 0, (NSEC_PER_SEC / 2) / spi->max_speed_hz); + spin_unlock(&c->lock); + + return 0; +} + +static irqreturn_t txx9spi_interrupt(int irq, void *dev_id) +{ + struct txx9spi *c = dev_id; + + /* disable rx intr */ + txx9spi_wr(c, txx9spi_rd(c, TXx9_SPCR0) & ~TXx9_SPCR0_RBSIE, + TXx9_SPCR0); + wake_up(&c->waitq); + return IRQ_HANDLED; +} + +static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m) +{ + struct spi_device *spi = m->spi; + struct spi_transfer *t; + unsigned int cs_delay; + unsigned int cs_change = 1; + int status = 0; + u32 mcr; + u32 prev_speed_hz = 0; + u8 prev_bits_per_word = 0; + + /* CS setup/hold/recovery time in nsec */ + cs_delay = 100 + (NSEC_PER_SEC / 2) / spi->max_speed_hz; + + mcr = txx9spi_rd(c, TXx9_SPMCR); + if (unlikely((mcr & TXx9_SPMCR_OPMODE) == TXx9_SPMCR_ACTIVE)) { + dev_err(&spi->dev, "Bad mode.\n"); + status = -EIO; + goto exit; + } + mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR); + + /* enter config mode */ + txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR); + txx9spi_wr(c, TXx9_SPCR0_SBOS + | ((spi->mode & SPI_CPOL) ? TXx9_SPCR0_SPOL : 0) + | ((spi->mode & SPI_CPHA) ? TXx9_SPCR0_SPHA : 0) + | 0x08, + TXx9_SPCR0); + + list_for_each_entry (t, &m->transfers, transfer_list) { + const void *txbuf = t->tx_buf; + void *rxbuf = t->rx_buf; + u32 data; + unsigned int len = t->len; + unsigned int wsize; + u32 speed_hz = t->speed_hz ? : spi->max_speed_hz; + u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word; + + bits_per_word = bits_per_word ? : 8; + wsize = bits_per_word >> 3; /* in bytes */ + + if (prev_speed_hz != speed_hz + || prev_bits_per_word != bits_per_word) { + int n = DIV_ROUND_UP(c->baseclk, speed_hz) - 1; + n = clamp(n, SPI_MIN_DIVIDER, SPI_MAX_DIVIDER); + /* enter config mode */ + txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, + TXx9_SPMCR); + txx9spi_wr(c, (n << 8) | bits_per_word, TXx9_SPCR1); + /* enter active mode */ + txx9spi_wr(c, mcr | TXx9_SPMCR_ACTIVE, TXx9_SPMCR); + + prev_speed_hz = speed_hz; + prev_bits_per_word = bits_per_word; + } + + if (cs_change) + txx9spi_cs_func(spi, c, 1, cs_delay); + cs_change = t->cs_change; + while (len) { + unsigned int count = SPI_FIFO_SIZE; + int i; + u32 cr0; + + if (len < count * wsize) + count = len / wsize; + /* now tx must be idle... */ + while (!(txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_SIDLE)) + cpu_relax(); + cr0 = txx9spi_rd(c, TXx9_SPCR0); + cr0 &= ~TXx9_SPCR0_RXIFL_MASK; + cr0 |= (count - 1) << 12; + /* enable rx intr */ + cr0 |= TXx9_SPCR0_RBSIE; + txx9spi_wr(c, cr0, TXx9_SPCR0); + /* send */ + for (i = 0; i < count; i++) { + if (txbuf) { + data = (wsize == 1) + ? *(const u8 *)txbuf + : *(const u16 *)txbuf; + txx9spi_wr(c, data, TXx9_SPDR); + txbuf += wsize; + } else + txx9spi_wr(c, 0, TXx9_SPDR); + } + /* wait all rx data */ + wait_event(c->waitq, + txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_RBSI); + /* receive */ + for (i = 0; i < count; i++) { + data = txx9spi_rd(c, TXx9_SPDR); + if (rxbuf) { + if (wsize == 1) + *(u8 *)rxbuf = data; + else + *(u16 *)rxbuf = data; + rxbuf += wsize; + } + } + len -= count * wsize; + } + m->actual_length += t->len; + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (!cs_change) + continue; + if (t->transfer_list.next == &m->transfers) + break; + /* sometimes a short mid-message deselect of the chip + * may be needed to terminate a mode or command + */ + txx9spi_cs_func(spi, c, 0, cs_delay); + } + +exit: + m->status = status; + m->complete(m->context); + + /* normally deactivate chipselect ... unless no error and + * cs_change has hinted that the next message will probably + * be for this chip too. + */ + if (!(status == 0 && cs_change)) + txx9spi_cs_func(spi, c, 0, cs_delay); + + /* enter config mode */ + txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR); +} + +static void txx9spi_work(struct work_struct *work) +{ + struct txx9spi *c = container_of(work, struct txx9spi, work); + unsigned long flags; + + spin_lock_irqsave(&c->lock, flags); + while (!list_empty(&c->queue)) { + struct spi_message *m; + + m = container_of(c->queue.next, struct spi_message, queue); + list_del_init(&m->queue); + spin_unlock_irqrestore(&c->lock, flags); + + txx9spi_work_one(c, m); + + spin_lock_irqsave(&c->lock, flags); + } + spin_unlock_irqrestore(&c->lock, flags); +} + +static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct spi_master *master = spi->master; + struct txx9spi *c = spi_master_get_devdata(master); + struct spi_transfer *t; + unsigned long flags; + + m->actual_length = 0; + + /* check each transfer's parameters */ + list_for_each_entry (t, &m->transfers, transfer_list) { + u32 speed_hz = t->speed_hz ? : spi->max_speed_hz; + u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word; + + bits_per_word = bits_per_word ? : 8; + if (!t->tx_buf && !t->rx_buf && t->len) + return -EINVAL; + if (bits_per_word != 8 && bits_per_word != 16) + return -EINVAL; + if (t->len & ((bits_per_word >> 3) - 1)) + return -EINVAL; + if (speed_hz < c->min_speed_hz || speed_hz > c->max_speed_hz) + return -EINVAL; + } + + spin_lock_irqsave(&c->lock, flags); + list_add_tail(&m->queue, &c->queue); + queue_work(c->workqueue, &c->work); + spin_unlock_irqrestore(&c->lock, flags); + + return 0; +} + +static int __init txx9spi_probe(struct platform_device *dev) +{ + struct spi_master *master; + struct txx9spi *c; + struct resource *res; + int ret = -ENODEV; + u32 mcr; + int irq; + + master = spi_alloc_master(&dev->dev, sizeof(*c)); + if (!master) + return ret; + c = spi_master_get_devdata(master); + platform_set_drvdata(dev, master); + + INIT_WORK(&c->work, txx9spi_work); + spin_lock_init(&c->lock); + INIT_LIST_HEAD(&c->queue); + init_waitqueue_head(&c->waitq); + + c->clk = clk_get(&dev->dev, "spi-baseclk"); + if (IS_ERR(c->clk)) { + ret = PTR_ERR(c->clk); + c->clk = NULL; + goto exit; + } + ret = clk_enable(c->clk); + if (ret) { + clk_put(c->clk); + c->clk = NULL; + goto exit; + } + c->baseclk = clk_get_rate(c->clk); + c->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1); + c->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1); + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) + goto exit_busy; + if (!devm_request_mem_region(&dev->dev, res->start, resource_size(res), + "spi_txx9")) + goto exit_busy; + c->membase = devm_ioremap(&dev->dev, res->start, resource_size(res)); + if (!c->membase) + goto exit_busy; + + /* enter config mode */ + mcr = txx9spi_rd(c, TXx9_SPMCR); + mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR); + txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR); + + irq = platform_get_irq(dev, 0); + if (irq < 0) + goto exit_busy; + ret = devm_request_irq(&dev->dev, irq, txx9spi_interrupt, 0, + "spi_txx9", c); + if (ret) + goto exit; + + c->workqueue = create_singlethread_workqueue( + dev_name(master->dev.parent)); + if (!c->workqueue) + goto exit_busy; + c->last_chipselect = -1; + + dev_info(&dev->dev, "at %#llx, irq %d, %dMHz\n", + (unsigned long long)res->start, irq, + (c->baseclk + 500000) / 1000000); + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA; + + master->bus_num = dev->id; + master->setup = txx9spi_setup; + master->transfer = txx9spi_transfer; + master->num_chipselect = (u16)UINT_MAX; /* any GPIO numbers */ + + ret = spi_register_master(master); + if (ret) + goto exit; + return 0; +exit_busy: + ret = -EBUSY; +exit: + if (c->workqueue) + destroy_workqueue(c->workqueue); + if (c->clk) { + clk_disable(c->clk); + clk_put(c->clk); + } + platform_set_drvdata(dev, NULL); + spi_master_put(master); + return ret; +} + +static int __exit txx9spi_remove(struct platform_device *dev) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(dev)); + struct txx9spi *c = spi_master_get_devdata(master); + + spi_unregister_master(master); + platform_set_drvdata(dev, NULL); + destroy_workqueue(c->workqueue); + clk_disable(c->clk); + clk_put(c->clk); + spi_master_put(master); + return 0; +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:spi_txx9"); + +static struct platform_driver txx9spi_driver = { + .remove = __exit_p(txx9spi_remove), + .driver = { + .name = "spi_txx9", + .owner = THIS_MODULE, + }, +}; + +static int __init txx9spi_init(void) +{ + return platform_driver_probe(&txx9spi_driver, txx9spi_probe); +} +subsys_initcall(txx9spi_init); + +static void __exit txx9spi_exit(void) +{ + platform_driver_unregister(&txx9spi_driver); +} +module_exit(txx9spi_exit); + +MODULE_DESCRIPTION("TXx9 SPI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c new file mode 100644 index 000000000000..4d2c75df886c --- /dev/null +++ b/drivers/spi/spi-xilinx.c @@ -0,0 +1,556 @@ +/* + * Xilinx SPI controller driver (master mode only) + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright (c) 2010 Secret Lab Technologies, Ltd. + * Copyright (c) 2009 Intel Corporation + * 2002-2007 (c) MontaVista Software, Inc. + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define XILINX_SPI_NAME "xilinx_spi" + +/* Register definitions as per "OPB Serial Peripheral Interface (SPI) (v1.00e) + * Product Specification", DS464 + */ +#define XSPI_CR_OFFSET 0x60 /* Control Register */ + +#define XSPI_CR_ENABLE 0x02 +#define XSPI_CR_MASTER_MODE 0x04 +#define XSPI_CR_CPOL 0x08 +#define XSPI_CR_CPHA 0x10 +#define XSPI_CR_MODE_MASK (XSPI_CR_CPHA | XSPI_CR_CPOL) +#define XSPI_CR_TXFIFO_RESET 0x20 +#define XSPI_CR_RXFIFO_RESET 0x40 +#define XSPI_CR_MANUAL_SSELECT 0x80 +#define XSPI_CR_TRANS_INHIBIT 0x100 +#define XSPI_CR_LSB_FIRST 0x200 + +#define XSPI_SR_OFFSET 0x64 /* Status Register */ + +#define XSPI_SR_RX_EMPTY_MASK 0x01 /* Receive FIFO is empty */ +#define XSPI_SR_RX_FULL_MASK 0x02 /* Receive FIFO is full */ +#define XSPI_SR_TX_EMPTY_MASK 0x04 /* Transmit FIFO is empty */ +#define XSPI_SR_TX_FULL_MASK 0x08 /* Transmit FIFO is full */ +#define XSPI_SR_MODE_FAULT_MASK 0x10 /* Mode fault error */ + +#define XSPI_TXD_OFFSET 0x68 /* Data Transmit Register */ +#define XSPI_RXD_OFFSET 0x6c /* Data Receive Register */ + +#define XSPI_SSR_OFFSET 0x70 /* 32-bit Slave Select Register */ + +/* Register definitions as per "OPB IPIF (v3.01c) Product Specification", DS414 + * IPIF registers are 32 bit + */ +#define XIPIF_V123B_DGIER_OFFSET 0x1c /* IPIF global int enable reg */ +#define XIPIF_V123B_GINTR_ENABLE 0x80000000 + +#define XIPIF_V123B_IISR_OFFSET 0x20 /* IPIF interrupt status reg */ +#define XIPIF_V123B_IIER_OFFSET 0x28 /* IPIF interrupt enable reg */ + +#define XSPI_INTR_MODE_FAULT 0x01 /* Mode fault error */ +#define XSPI_INTR_SLAVE_MODE_FAULT 0x02 /* Selected as slave while + * disabled */ +#define XSPI_INTR_TX_EMPTY 0x04 /* TxFIFO is empty */ +#define XSPI_INTR_TX_UNDERRUN 0x08 /* TxFIFO was underrun */ +#define XSPI_INTR_RX_FULL 0x10 /* RxFIFO is full */ +#define XSPI_INTR_RX_OVERRUN 0x20 /* RxFIFO was overrun */ +#define XSPI_INTR_TX_HALF_EMPTY 0x40 /* TxFIFO is half empty */ + +#define XIPIF_V123B_RESETR_OFFSET 0x40 /* IPIF reset register */ +#define XIPIF_V123B_RESET_MASK 0x0a /* the value to write */ + +struct xilinx_spi { + /* bitbang has to be first */ + struct spi_bitbang bitbang; + struct completion done; + struct resource mem; /* phys mem */ + void __iomem *regs; /* virt. address of the control registers */ + + u32 irq; + + u8 *rx_ptr; /* pointer in the Tx buffer */ + const u8 *tx_ptr; /* pointer in the Rx buffer */ + int remaining_bytes; /* the number of bytes left to transfer */ + u8 bits_per_word; + unsigned int (*read_fn) (void __iomem *); + void (*write_fn) (u32, void __iomem *); + void (*tx_fn) (struct xilinx_spi *); + void (*rx_fn) (struct xilinx_spi *); +}; + +static void xspi_write32(u32 val, void __iomem *addr) +{ + iowrite32(val, addr); +} + +static unsigned int xspi_read32(void __iomem *addr) +{ + return ioread32(addr); +} + +static void xspi_write32_be(u32 val, void __iomem *addr) +{ + iowrite32be(val, addr); +} + +static unsigned int xspi_read32_be(void __iomem *addr) +{ + return ioread32be(addr); +} + +static void xspi_tx8(struct xilinx_spi *xspi) +{ + xspi->write_fn(*xspi->tx_ptr, xspi->regs + XSPI_TXD_OFFSET); + xspi->tx_ptr++; +} + +static void xspi_tx16(struct xilinx_spi *xspi) +{ + xspi->write_fn(*(u16 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET); + xspi->tx_ptr += 2; +} + +static void xspi_tx32(struct xilinx_spi *xspi) +{ + xspi->write_fn(*(u32 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET); + xspi->tx_ptr += 4; +} + +static void xspi_rx8(struct xilinx_spi *xspi) +{ + u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET); + if (xspi->rx_ptr) { + *xspi->rx_ptr = data & 0xff; + xspi->rx_ptr++; + } +} + +static void xspi_rx16(struct xilinx_spi *xspi) +{ + u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET); + if (xspi->rx_ptr) { + *(u16 *)(xspi->rx_ptr) = data & 0xffff; + xspi->rx_ptr += 2; + } +} + +static void xspi_rx32(struct xilinx_spi *xspi) +{ + u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET); + if (xspi->rx_ptr) { + *(u32 *)(xspi->rx_ptr) = data; + xspi->rx_ptr += 4; + } +} + +static void xspi_init_hw(struct xilinx_spi *xspi) +{ + void __iomem *regs_base = xspi->regs; + + /* Reset the SPI device */ + xspi->write_fn(XIPIF_V123B_RESET_MASK, + regs_base + XIPIF_V123B_RESETR_OFFSET); + /* Disable all the interrupts just in case */ + xspi->write_fn(0, regs_base + XIPIF_V123B_IIER_OFFSET); + /* Enable the global IPIF interrupt */ + xspi->write_fn(XIPIF_V123B_GINTR_ENABLE, + regs_base + XIPIF_V123B_DGIER_OFFSET); + /* Deselect the slave on the SPI bus */ + xspi->write_fn(0xffff, regs_base + XSPI_SSR_OFFSET); + /* Disable the transmitter, enable Manual Slave Select Assertion, + * put SPI controller into master mode, and enable it */ + xspi->write_fn(XSPI_CR_TRANS_INHIBIT | XSPI_CR_MANUAL_SSELECT | + XSPI_CR_MASTER_MODE | XSPI_CR_ENABLE | XSPI_CR_TXFIFO_RESET | + XSPI_CR_RXFIFO_RESET, regs_base + XSPI_CR_OFFSET); +} + +static void xilinx_spi_chipselect(struct spi_device *spi, int is_on) +{ + struct xilinx_spi *xspi = spi_master_get_devdata(spi->master); + + if (is_on == BITBANG_CS_INACTIVE) { + /* Deselect the slave on the SPI bus */ + xspi->write_fn(0xffff, xspi->regs + XSPI_SSR_OFFSET); + } else if (is_on == BITBANG_CS_ACTIVE) { + /* Set the SPI clock phase and polarity */ + u16 cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) + & ~XSPI_CR_MODE_MASK; + if (spi->mode & SPI_CPHA) + cr |= XSPI_CR_CPHA; + if (spi->mode & SPI_CPOL) + cr |= XSPI_CR_CPOL; + xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); + + /* We do not check spi->max_speed_hz here as the SPI clock + * frequency is not software programmable (the IP block design + * parameter) + */ + + /* Activate the chip select */ + xspi->write_fn(~(0x0001 << spi->chip_select), + xspi->regs + XSPI_SSR_OFFSET); + } +} + +/* spi_bitbang requires custom setup_transfer() to be defined if there is a + * custom txrx_bufs(). We have nothing to setup here as the SPI IP block + * supports 8 or 16 bits per word which cannot be changed in software. + * SPI clock can't be changed in software either. + * Check for correct bits per word. Chip select delay calculations could be + * added here as soon as bitbang_work() can be made aware of the delay value. + */ +static int xilinx_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct xilinx_spi *xspi = spi_master_get_devdata(spi->master); + u8 bits_per_word; + + bits_per_word = (t && t->bits_per_word) + ? t->bits_per_word : spi->bits_per_word; + if (bits_per_word != xspi->bits_per_word) { + dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", + __func__, bits_per_word); + return -EINVAL; + } + + return 0; +} + +static int xilinx_spi_setup(struct spi_device *spi) +{ + /* always return 0, we can not check the number of bits. + * There are cases when SPI setup is called before any driver is + * there, in that case the SPI core defaults to 8 bits, which we + * do not support in some cases. But if we return an error, the + * SPI device would not be registered and no driver can get hold of it + * When the driver is there, it will call SPI setup again with the + * correct number of bits per transfer. + * If a driver setups with the wrong bit number, it will fail when + * it tries to do a transfer + */ + return 0; +} + +static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi) +{ + u8 sr; + + /* Fill the Tx FIFO with as many bytes as possible */ + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); + while ((sr & XSPI_SR_TX_FULL_MASK) == 0 && xspi->remaining_bytes > 0) { + if (xspi->tx_ptr) + xspi->tx_fn(xspi); + else + xspi->write_fn(0, xspi->regs + XSPI_TXD_OFFSET); + xspi->remaining_bytes -= xspi->bits_per_word / 8; + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); + } +} + +static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct xilinx_spi *xspi = spi_master_get_devdata(spi->master); + u32 ipif_ier; + u16 cr; + + /* We get here with transmitter inhibited */ + + xspi->tx_ptr = t->tx_buf; + xspi->rx_ptr = t->rx_buf; + xspi->remaining_bytes = t->len; + INIT_COMPLETION(xspi->done); + + xilinx_spi_fill_tx_fifo(xspi); + + /* Enable the transmit empty interrupt, which we use to determine + * progress on the transmission. + */ + ipif_ier = xspi->read_fn(xspi->regs + XIPIF_V123B_IIER_OFFSET); + xspi->write_fn(ipif_ier | XSPI_INTR_TX_EMPTY, + xspi->regs + XIPIF_V123B_IIER_OFFSET); + + /* Start the transfer by not inhibiting the transmitter any longer */ + cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) & + ~XSPI_CR_TRANS_INHIBIT; + xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); + + wait_for_completion(&xspi->done); + + /* Disable the transmit empty interrupt */ + xspi->write_fn(ipif_ier, xspi->regs + XIPIF_V123B_IIER_OFFSET); + + return t->len - xspi->remaining_bytes; +} + + +/* This driver supports single master mode only. Hence Tx FIFO Empty + * is the only interrupt we care about. + * Receive FIFO Overrun, Transmit FIFO Underrun, Mode Fault, and Slave Mode + * Fault are not to happen. + */ +static irqreturn_t xilinx_spi_irq(int irq, void *dev_id) +{ + struct xilinx_spi *xspi = dev_id; + u32 ipif_isr; + + /* Get the IPIF interrupts, and clear them immediately */ + ipif_isr = xspi->read_fn(xspi->regs + XIPIF_V123B_IISR_OFFSET); + xspi->write_fn(ipif_isr, xspi->regs + XIPIF_V123B_IISR_OFFSET); + + if (ipif_isr & XSPI_INTR_TX_EMPTY) { /* Transmission completed */ + u16 cr; + u8 sr; + + /* A transmit has just completed. Process received data and + * check for more data to transmit. Always inhibit the + * transmitter while the Isr refills the transmit register/FIFO, + * or make sure it is stopped if we're done. + */ + cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET); + xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT, + xspi->regs + XSPI_CR_OFFSET); + + /* Read out all the data from the Rx FIFO */ + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); + while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) { + xspi->rx_fn(xspi); + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); + } + + /* See if there is more data to send */ + if (xspi->remaining_bytes > 0) { + xilinx_spi_fill_tx_fifo(xspi); + /* Start the transfer by not inhibiting the + * transmitter any longer + */ + xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); + } else { + /* No more data to send. + * Indicate the transfer is completed. + */ + complete(&xspi->done); + } + } + + return IRQ_HANDLED; +} + +static const struct of_device_id xilinx_spi_of_match[] = { + { .compatible = "xlnx,xps-spi-2.00.a", }, + { .compatible = "xlnx,xps-spi-2.00.b", }, + {} +}; +MODULE_DEVICE_TABLE(of, xilinx_spi_of_match); + +struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, + u32 irq, s16 bus_num, int num_cs, int little_endian, int bits_per_word) +{ + struct spi_master *master; + struct xilinx_spi *xspi; + int ret; + + master = spi_alloc_master(dev, sizeof(struct xilinx_spi)); + if (!master) + return NULL; + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA; + + xspi = spi_master_get_devdata(master); + xspi->bitbang.master = spi_master_get(master); + xspi->bitbang.chipselect = xilinx_spi_chipselect; + xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer; + xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs; + xspi->bitbang.master->setup = xilinx_spi_setup; + init_completion(&xspi->done); + + if (!request_mem_region(mem->start, resource_size(mem), + XILINX_SPI_NAME)) + goto put_master; + + xspi->regs = ioremap(mem->start, resource_size(mem)); + if (xspi->regs == NULL) { + dev_warn(dev, "ioremap failure\n"); + goto map_failed; + } + + master->bus_num = bus_num; + master->num_chipselect = num_cs; + master->dev.of_node = dev->of_node; + + xspi->mem = *mem; + xspi->irq = irq; + if (little_endian) { + xspi->read_fn = xspi_read32; + xspi->write_fn = xspi_write32; + } else { + xspi->read_fn = xspi_read32_be; + xspi->write_fn = xspi_write32_be; + } + xspi->bits_per_word = bits_per_word; + if (xspi->bits_per_word == 8) { + xspi->tx_fn = xspi_tx8; + xspi->rx_fn = xspi_rx8; + } else if (xspi->bits_per_word == 16) { + xspi->tx_fn = xspi_tx16; + xspi->rx_fn = xspi_rx16; + } else if (xspi->bits_per_word == 32) { + xspi->tx_fn = xspi_tx32; + xspi->rx_fn = xspi_rx32; + } else + goto unmap_io; + + + /* SPI controller initializations */ + xspi_init_hw(xspi); + + /* Register for SPI Interrupt */ + ret = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi); + if (ret) + goto unmap_io; + + ret = spi_bitbang_start(&xspi->bitbang); + if (ret) { + dev_err(dev, "spi_bitbang_start FAILED\n"); + goto free_irq; + } + + dev_info(dev, "at 0x%08llX mapped to 0x%p, irq=%d\n", + (unsigned long long)mem->start, xspi->regs, xspi->irq); + return master; + +free_irq: + free_irq(xspi->irq, xspi); +unmap_io: + iounmap(xspi->regs); +map_failed: + release_mem_region(mem->start, resource_size(mem)); +put_master: + spi_master_put(master); + return NULL; +} +EXPORT_SYMBOL(xilinx_spi_init); + +void xilinx_spi_deinit(struct spi_master *master) +{ + struct xilinx_spi *xspi; + + xspi = spi_master_get_devdata(master); + + spi_bitbang_stop(&xspi->bitbang); + free_irq(xspi->irq, xspi); + iounmap(xspi->regs); + + release_mem_region(xspi->mem.start, resource_size(&xspi->mem)); + spi_master_put(xspi->bitbang.master); +} +EXPORT_SYMBOL(xilinx_spi_deinit); + +static int __devinit xilinx_spi_probe(struct platform_device *dev) +{ + struct xspi_platform_data *pdata; + struct resource *r; + int irq, num_cs = 0, little_endian = 0, bits_per_word = 8; + struct spi_master *master; + u8 i; + + pdata = dev->dev.platform_data; + if (pdata) { + num_cs = pdata->num_chipselect; + little_endian = pdata->little_endian; + bits_per_word = pdata->bits_per_word; + } + +#ifdef CONFIG_OF + if (dev->dev.of_node) { + const __be32 *prop; + int len; + + /* number of slave select bits is required */ + prop = of_get_property(dev->dev.of_node, "xlnx,num-ss-bits", + &len); + if (prop && len >= sizeof(*prop)) + num_cs = __be32_to_cpup(prop); + } +#endif + + if (!num_cs) { + dev_err(&dev->dev, "Missing slave select configuration data\n"); + return -EINVAL; + } + + + r = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!r) + return -ENODEV; + + irq = platform_get_irq(dev, 0); + if (irq < 0) + return -ENXIO; + + master = xilinx_spi_init(&dev->dev, r, irq, dev->id, num_cs, + little_endian, bits_per_word); + if (!master) + return -ENODEV; + + if (pdata) { + for (i = 0; i < pdata->num_devices; i++) + spi_new_device(master, pdata->devices + i); + } + + platform_set_drvdata(dev, master); + return 0; +} + +static int __devexit xilinx_spi_remove(struct platform_device *dev) +{ + xilinx_spi_deinit(platform_get_drvdata(dev)); + platform_set_drvdata(dev, 0); + + return 0; +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:" XILINX_SPI_NAME); + +static struct platform_driver xilinx_spi_driver = { + .probe = xilinx_spi_probe, + .remove = __devexit_p(xilinx_spi_remove), + .driver = { + .name = XILINX_SPI_NAME, + .owner = THIS_MODULE, + .of_match_table = xilinx_spi_of_match, + }, +}; + +static int __init xilinx_spi_pltfm_init(void) +{ + return platform_driver_register(&xilinx_spi_driver); +} +module_init(xilinx_spi_pltfm_init); + +static void __exit xilinx_spi_pltfm_exit(void) +{ + platform_driver_unregister(&xilinx_spi_driver); +} +module_exit(xilinx_spi_pltfm_exit); + +MODULE_AUTHOR("MontaVista Software, Inc. "); +MODULE_DESCRIPTION("Xilinx SPI driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 2e13a14bba3f..4d1b9f517ce8 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1,5 +1,5 @@ /* - * spi.c - SPI init/core code + * SPI init/core code * * Copyright (C) 2005 David Brownell * diff --git a/drivers/spi/spi_altera.c b/drivers/spi/spi_altera.c deleted file mode 100644 index 4813a63ce6fb..000000000000 --- a/drivers/spi/spi_altera.c +++ /dev/null @@ -1,339 +0,0 @@ -/* - * Altera SPI driver - * - * Copyright (C) 2008 Thomas Chou - * - * Based on spi_s3c24xx.c, which is: - * Copyright (c) 2006 Ben Dooks - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "spi_altera" - -#define ALTERA_SPI_RXDATA 0 -#define ALTERA_SPI_TXDATA 4 -#define ALTERA_SPI_STATUS 8 -#define ALTERA_SPI_CONTROL 12 -#define ALTERA_SPI_SLAVE_SEL 20 - -#define ALTERA_SPI_STATUS_ROE_MSK 0x8 -#define ALTERA_SPI_STATUS_TOE_MSK 0x10 -#define ALTERA_SPI_STATUS_TMT_MSK 0x20 -#define ALTERA_SPI_STATUS_TRDY_MSK 0x40 -#define ALTERA_SPI_STATUS_RRDY_MSK 0x80 -#define ALTERA_SPI_STATUS_E_MSK 0x100 - -#define ALTERA_SPI_CONTROL_IROE_MSK 0x8 -#define ALTERA_SPI_CONTROL_ITOE_MSK 0x10 -#define ALTERA_SPI_CONTROL_ITRDY_MSK 0x40 -#define ALTERA_SPI_CONTROL_IRRDY_MSK 0x80 -#define ALTERA_SPI_CONTROL_IE_MSK 0x100 -#define ALTERA_SPI_CONTROL_SSO_MSK 0x400 - -struct altera_spi { - /* bitbang has to be first */ - struct spi_bitbang bitbang; - struct completion done; - - void __iomem *base; - int irq; - int len; - int count; - int bytes_per_word; - unsigned long imr; - - /* data buffers */ - const unsigned char *tx; - unsigned char *rx; -}; - -static inline struct altera_spi *altera_spi_to_hw(struct spi_device *sdev) -{ - return spi_master_get_devdata(sdev->master); -} - -static void altera_spi_chipsel(struct spi_device *spi, int value) -{ - struct altera_spi *hw = altera_spi_to_hw(spi); - - if (spi->mode & SPI_CS_HIGH) { - switch (value) { - case BITBANG_CS_INACTIVE: - writel(1 << spi->chip_select, - hw->base + ALTERA_SPI_SLAVE_SEL); - hw->imr |= ALTERA_SPI_CONTROL_SSO_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); - break; - - case BITBANG_CS_ACTIVE: - hw->imr &= ~ALTERA_SPI_CONTROL_SSO_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); - writel(0, hw->base + ALTERA_SPI_SLAVE_SEL); - break; - } - } else { - switch (value) { - case BITBANG_CS_INACTIVE: - hw->imr &= ~ALTERA_SPI_CONTROL_SSO_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); - break; - - case BITBANG_CS_ACTIVE: - writel(1 << spi->chip_select, - hw->base + ALTERA_SPI_SLAVE_SEL); - hw->imr |= ALTERA_SPI_CONTROL_SSO_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); - break; - } - } -} - -static int altera_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t) -{ - return 0; -} - -static int altera_spi_setup(struct spi_device *spi) -{ - return 0; -} - -static inline unsigned int hw_txbyte(struct altera_spi *hw, int count) -{ - if (hw->tx) { - switch (hw->bytes_per_word) { - case 1: - return hw->tx[count]; - case 2: - return (hw->tx[count * 2] - | (hw->tx[count * 2 + 1] << 8)); - } - } - return 0; -} - -static int altera_spi_txrx(struct spi_device *spi, struct spi_transfer *t) -{ - struct altera_spi *hw = altera_spi_to_hw(spi); - - hw->tx = t->tx_buf; - hw->rx = t->rx_buf; - hw->count = 0; - hw->bytes_per_word = (t->bits_per_word ? : spi->bits_per_word) / 8; - hw->len = t->len / hw->bytes_per_word; - - if (hw->irq >= 0) { - /* enable receive interrupt */ - hw->imr |= ALTERA_SPI_CONTROL_IRRDY_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); - - /* send the first byte */ - writel(hw_txbyte(hw, 0), hw->base + ALTERA_SPI_TXDATA); - - wait_for_completion(&hw->done); - /* disable receive interrupt */ - hw->imr &= ~ALTERA_SPI_CONTROL_IRRDY_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); - } else { - /* send the first byte */ - writel(hw_txbyte(hw, 0), hw->base + ALTERA_SPI_TXDATA); - - while (1) { - unsigned int rxd; - - while (!(readl(hw->base + ALTERA_SPI_STATUS) & - ALTERA_SPI_STATUS_RRDY_MSK)) - cpu_relax(); - - rxd = readl(hw->base + ALTERA_SPI_RXDATA); - if (hw->rx) { - switch (hw->bytes_per_word) { - case 1: - hw->rx[hw->count] = rxd; - break; - case 2: - hw->rx[hw->count * 2] = rxd; - hw->rx[hw->count * 2 + 1] = rxd >> 8; - break; - } - } - - hw->count++; - - if (hw->count < hw->len) - writel(hw_txbyte(hw, hw->count), - hw->base + ALTERA_SPI_TXDATA); - else - break; - } - - } - - return hw->count * hw->bytes_per_word; -} - -static irqreturn_t altera_spi_irq(int irq, void *dev) -{ - struct altera_spi *hw = dev; - unsigned int rxd; - - rxd = readl(hw->base + ALTERA_SPI_RXDATA); - if (hw->rx) { - switch (hw->bytes_per_word) { - case 1: - hw->rx[hw->count] = rxd; - break; - case 2: - hw->rx[hw->count * 2] = rxd; - hw->rx[hw->count * 2 + 1] = rxd >> 8; - break; - } - } - - hw->count++; - - if (hw->count < hw->len) - writel(hw_txbyte(hw, hw->count), hw->base + ALTERA_SPI_TXDATA); - else - complete(&hw->done); - - return IRQ_HANDLED; -} - -static int __devinit altera_spi_probe(struct platform_device *pdev) -{ - struct altera_spi_platform_data *platp = pdev->dev.platform_data; - struct altera_spi *hw; - struct spi_master *master; - struct resource *res; - int err = -ENODEV; - - master = spi_alloc_master(&pdev->dev, sizeof(struct altera_spi)); - if (!master) - return err; - - /* setup the master state. */ - master->bus_num = pdev->id; - master->num_chipselect = 16; - master->mode_bits = SPI_CS_HIGH; - master->setup = altera_spi_setup; - - hw = spi_master_get_devdata(master); - platform_set_drvdata(pdev, hw); - - /* setup the state for the bitbang driver */ - hw->bitbang.master = spi_master_get(master); - if (!hw->bitbang.master) - return err; - hw->bitbang.setup_transfer = altera_spi_setupxfer; - hw->bitbang.chipselect = altera_spi_chipsel; - hw->bitbang.txrx_bufs = altera_spi_txrx; - - /* find and map our resources */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - goto exit_busy; - if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), - pdev->name)) - goto exit_busy; - hw->base = devm_ioremap_nocache(&pdev->dev, res->start, - resource_size(res)); - if (!hw->base) - goto exit_busy; - /* program defaults into the registers */ - hw->imr = 0; /* disable spi interrupts */ - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); - writel(0, hw->base + ALTERA_SPI_STATUS); /* clear status reg */ - if (readl(hw->base + ALTERA_SPI_STATUS) & ALTERA_SPI_STATUS_RRDY_MSK) - readl(hw->base + ALTERA_SPI_RXDATA); /* flush rxdata */ - /* irq is optional */ - hw->irq = platform_get_irq(pdev, 0); - if (hw->irq >= 0) { - init_completion(&hw->done); - err = devm_request_irq(&pdev->dev, hw->irq, altera_spi_irq, 0, - pdev->name, hw); - if (err) - goto exit; - } - /* find platform data */ - if (!platp) - hw->bitbang.master->dev.of_node = pdev->dev.of_node; - - /* register our spi controller */ - err = spi_bitbang_start(&hw->bitbang); - if (err) - goto exit; - dev_info(&pdev->dev, "base %p, irq %d\n", hw->base, hw->irq); - - return 0; - -exit_busy: - err = -EBUSY; -exit: - platform_set_drvdata(pdev, NULL); - spi_master_put(master); - return err; -} - -static int __devexit altera_spi_remove(struct platform_device *dev) -{ - struct altera_spi *hw = platform_get_drvdata(dev); - struct spi_master *master = hw->bitbang.master; - - spi_bitbang_stop(&hw->bitbang); - platform_set_drvdata(dev, NULL); - spi_master_put(master); - return 0; -} - -#ifdef CONFIG_OF -static const struct of_device_id altera_spi_match[] = { - { .compatible = "ALTR,spi-1.0", }, - {}, -}; -MODULE_DEVICE_TABLE(of, altera_spi_match); -#else /* CONFIG_OF */ -#define altera_spi_match NULL -#endif /* CONFIG_OF */ - -static struct platform_driver altera_spi_driver = { - .probe = altera_spi_probe, - .remove = __devexit_p(altera_spi_remove), - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - .pm = NULL, - .of_match_table = altera_spi_match, - }, -}; - -static int __init altera_spi_init(void) -{ - return platform_driver_register(&altera_spi_driver); -} -module_init(altera_spi_init); - -static void __exit altera_spi_exit(void) -{ - platform_driver_unregister(&altera_spi_driver); -} -module_exit(altera_spi_exit); - -MODULE_DESCRIPTION("Altera SPI driver"); -MODULE_AUTHOR("Thomas Chou "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c deleted file mode 100644 index f706dba165cf..000000000000 --- a/drivers/spi/spi_bfin5xx.c +++ /dev/null @@ -1,1530 +0,0 @@ -/* - * Blackfin On-Chip SPI Driver - * - * Copyright 2004-2010 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define DRV_NAME "bfin-spi" -#define DRV_AUTHOR "Bryan Wu, Luke Yang" -#define DRV_DESC "Blackfin on-chip SPI Controller Driver" -#define DRV_VERSION "1.0" - -MODULE_AUTHOR(DRV_AUTHOR); -MODULE_DESCRIPTION(DRV_DESC); -MODULE_LICENSE("GPL"); - -#define START_STATE ((void *)0) -#define RUNNING_STATE ((void *)1) -#define DONE_STATE ((void *)2) -#define ERROR_STATE ((void *)-1) - -struct bfin_spi_master_data; - -struct bfin_spi_transfer_ops { - void (*write) (struct bfin_spi_master_data *); - void (*read) (struct bfin_spi_master_data *); - void (*duplex) (struct bfin_spi_master_data *); -}; - -struct bfin_spi_master_data { - /* Driver model hookup */ - struct platform_device *pdev; - - /* SPI framework hookup */ - struct spi_master *master; - - /* Regs base of SPI controller */ - void __iomem *regs_base; - - /* Pin request list */ - u16 *pin_req; - - /* BFIN hookup */ - struct bfin5xx_spi_master *master_info; - - /* Driver message queue */ - struct workqueue_struct *workqueue; - struct work_struct pump_messages; - spinlock_t lock; - struct list_head queue; - int busy; - bool running; - - /* Message Transfer pump */ - struct tasklet_struct pump_transfers; - - /* Current message transfer state info */ - struct spi_message *cur_msg; - struct spi_transfer *cur_transfer; - struct bfin_spi_slave_data *cur_chip; - size_t len_in_bytes; - size_t len; - void *tx; - void *tx_end; - void *rx; - void *rx_end; - - /* DMA stuffs */ - int dma_channel; - int dma_mapped; - int dma_requested; - dma_addr_t rx_dma; - dma_addr_t tx_dma; - - int irq_requested; - int spi_irq; - - size_t rx_map_len; - size_t tx_map_len; - u8 n_bytes; - u16 ctrl_reg; - u16 flag_reg; - - int cs_change; - const struct bfin_spi_transfer_ops *ops; -}; - -struct bfin_spi_slave_data { - u16 ctl_reg; - u16 baud; - u16 flag; - - u8 chip_select_num; - u8 enable_dma; - u16 cs_chg_udelay; /* Some devices require > 255usec delay */ - u32 cs_gpio; - u16 idle_tx_val; - u8 pio_interrupt; /* use spi data irq */ - const struct bfin_spi_transfer_ops *ops; -}; - -#define DEFINE_SPI_REG(reg, off) \ -static inline u16 read_##reg(struct bfin_spi_master_data *drv_data) \ - { return bfin_read16(drv_data->regs_base + off); } \ -static inline void write_##reg(struct bfin_spi_master_data *drv_data, u16 v) \ - { bfin_write16(drv_data->regs_base + off, v); } - -DEFINE_SPI_REG(CTRL, 0x00) -DEFINE_SPI_REG(FLAG, 0x04) -DEFINE_SPI_REG(STAT, 0x08) -DEFINE_SPI_REG(TDBR, 0x0C) -DEFINE_SPI_REG(RDBR, 0x10) -DEFINE_SPI_REG(BAUD, 0x14) -DEFINE_SPI_REG(SHAW, 0x18) - -static void bfin_spi_enable(struct bfin_spi_master_data *drv_data) -{ - u16 cr; - - cr = read_CTRL(drv_data); - write_CTRL(drv_data, (cr | BIT_CTL_ENABLE)); -} - -static void bfin_spi_disable(struct bfin_spi_master_data *drv_data) -{ - u16 cr; - - cr = read_CTRL(drv_data); - write_CTRL(drv_data, (cr & (~BIT_CTL_ENABLE))); -} - -/* Caculate the SPI_BAUD register value based on input HZ */ -static u16 hz_to_spi_baud(u32 speed_hz) -{ - u_long sclk = get_sclk(); - u16 spi_baud = (sclk / (2 * speed_hz)); - - if ((sclk % (2 * speed_hz)) > 0) - spi_baud++; - - if (spi_baud < MIN_SPI_BAUD_VAL) - spi_baud = MIN_SPI_BAUD_VAL; - - return spi_baud; -} - -static int bfin_spi_flush(struct bfin_spi_master_data *drv_data) -{ - unsigned long limit = loops_per_jiffy << 1; - - /* wait for stop and clear stat */ - while (!(read_STAT(drv_data) & BIT_STAT_SPIF) && --limit) - cpu_relax(); - - write_STAT(drv_data, BIT_STAT_CLR); - - return limit; -} - -/* Chip select operation functions for cs_change flag */ -static void bfin_spi_cs_active(struct bfin_spi_master_data *drv_data, struct bfin_spi_slave_data *chip) -{ - if (likely(chip->chip_select_num < MAX_CTRL_CS)) { - u16 flag = read_FLAG(drv_data); - - flag &= ~chip->flag; - - write_FLAG(drv_data, flag); - } else { - gpio_set_value(chip->cs_gpio, 0); - } -} - -static void bfin_spi_cs_deactive(struct bfin_spi_master_data *drv_data, - struct bfin_spi_slave_data *chip) -{ - if (likely(chip->chip_select_num < MAX_CTRL_CS)) { - u16 flag = read_FLAG(drv_data); - - flag |= chip->flag; - - write_FLAG(drv_data, flag); - } else { - gpio_set_value(chip->cs_gpio, 1); - } - - /* Move delay here for consistency */ - if (chip->cs_chg_udelay) - udelay(chip->cs_chg_udelay); -} - -/* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */ -static inline void bfin_spi_cs_enable(struct bfin_spi_master_data *drv_data, - struct bfin_spi_slave_data *chip) -{ - if (chip->chip_select_num < MAX_CTRL_CS) { - u16 flag = read_FLAG(drv_data); - - flag |= (chip->flag >> 8); - - write_FLAG(drv_data, flag); - } -} - -static inline void bfin_spi_cs_disable(struct bfin_spi_master_data *drv_data, - struct bfin_spi_slave_data *chip) -{ - if (chip->chip_select_num < MAX_CTRL_CS) { - u16 flag = read_FLAG(drv_data); - - flag &= ~(chip->flag >> 8); - - write_FLAG(drv_data, flag); - } -} - -/* stop controller and re-config current chip*/ -static void bfin_spi_restore_state(struct bfin_spi_master_data *drv_data) -{ - struct bfin_spi_slave_data *chip = drv_data->cur_chip; - - /* Clear status and disable clock */ - write_STAT(drv_data, BIT_STAT_CLR); - bfin_spi_disable(drv_data); - dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n"); - - SSYNC(); - - /* Load the registers */ - write_CTRL(drv_data, chip->ctl_reg); - write_BAUD(drv_data, chip->baud); - - bfin_spi_enable(drv_data); - bfin_spi_cs_active(drv_data, chip); -} - -/* used to kick off transfer in rx mode and read unwanted RX data */ -static inline void bfin_spi_dummy_read(struct bfin_spi_master_data *drv_data) -{ - (void) read_RDBR(drv_data); -} - -static void bfin_spi_u8_writer(struct bfin_spi_master_data *drv_data) -{ - /* clear RXS (we check for RXS inside the loop) */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->tx < drv_data->tx_end) { - write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); - /* wait until transfer finished. - checking SPIF or TXS may not guarantee transfer completion */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - /* discard RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - } -} - -static void bfin_spi_u8_reader(struct bfin_spi_master_data *drv_data) -{ - u16 tx_val = drv_data->cur_chip->idle_tx_val; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - write_TDBR(drv_data, tx_val); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); - } -} - -static void bfin_spi_u8_duplex(struct bfin_spi_master_data *drv_data) -{ - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); - } -} - -static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8 = { - .write = bfin_spi_u8_writer, - .read = bfin_spi_u8_reader, - .duplex = bfin_spi_u8_duplex, -}; - -static void bfin_spi_u16_writer(struct bfin_spi_master_data *drv_data) -{ - /* clear RXS (we check for RXS inside the loop) */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->tx < drv_data->tx_end) { - write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); - drv_data->tx += 2; - /* wait until transfer finished. - checking SPIF or TXS may not guarantee transfer completion */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - /* discard RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - } -} - -static void bfin_spi_u16_reader(struct bfin_spi_master_data *drv_data) -{ - u16 tx_val = drv_data->cur_chip->idle_tx_val; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - write_TDBR(drv_data, tx_val); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u16 *) (drv_data->rx) = read_RDBR(drv_data); - drv_data->rx += 2; - } -} - -static void bfin_spi_u16_duplex(struct bfin_spi_master_data *drv_data) -{ - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); - drv_data->tx += 2; - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u16 *) (drv_data->rx) = read_RDBR(drv_data); - drv_data->rx += 2; - } -} - -static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16 = { - .write = bfin_spi_u16_writer, - .read = bfin_spi_u16_reader, - .duplex = bfin_spi_u16_duplex, -}; - -/* test if there is more transfer to be done */ -static void *bfin_spi_next_transfer(struct bfin_spi_master_data *drv_data) -{ - struct spi_message *msg = drv_data->cur_msg; - struct spi_transfer *trans = drv_data->cur_transfer; - - /* Move to next transfer */ - if (trans->transfer_list.next != &msg->transfers) { - drv_data->cur_transfer = - list_entry(trans->transfer_list.next, - struct spi_transfer, transfer_list); - return RUNNING_STATE; - } else - return DONE_STATE; -} - -/* - * caller already set message->status; - * dma and pio irqs are blocked give finished message back - */ -static void bfin_spi_giveback(struct bfin_spi_master_data *drv_data) -{ - struct bfin_spi_slave_data *chip = drv_data->cur_chip; - struct spi_transfer *last_transfer; - unsigned long flags; - struct spi_message *msg; - - spin_lock_irqsave(&drv_data->lock, flags); - msg = drv_data->cur_msg; - drv_data->cur_msg = NULL; - drv_data->cur_transfer = NULL; - drv_data->cur_chip = NULL; - queue_work(drv_data->workqueue, &drv_data->pump_messages); - spin_unlock_irqrestore(&drv_data->lock, flags); - - last_transfer = list_entry(msg->transfers.prev, - struct spi_transfer, transfer_list); - - msg->state = NULL; - - if (!drv_data->cs_change) - bfin_spi_cs_deactive(drv_data, chip); - - /* Not stop spi in autobuffer mode */ - if (drv_data->tx_dma != 0xFFFF) - bfin_spi_disable(drv_data); - - if (msg->complete) - msg->complete(msg->context); -} - -/* spi data irq handler */ -static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) -{ - struct bfin_spi_master_data *drv_data = dev_id; - struct bfin_spi_slave_data *chip = drv_data->cur_chip; - struct spi_message *msg = drv_data->cur_msg; - int n_bytes = drv_data->n_bytes; - int loop = 0; - - /* wait until transfer finished. */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - - if ((drv_data->tx && drv_data->tx >= drv_data->tx_end) || - (drv_data->rx && drv_data->rx >= (drv_data->rx_end - n_bytes))) { - /* last read */ - if (drv_data->rx) { - dev_dbg(&drv_data->pdev->dev, "last read\n"); - if (n_bytes % 2) { - u16 *buf = (u16 *)drv_data->rx; - for (loop = 0; loop < n_bytes / 2; loop++) - *buf++ = read_RDBR(drv_data); - } else { - u8 *buf = (u8 *)drv_data->rx; - for (loop = 0; loop < n_bytes; loop++) - *buf++ = read_RDBR(drv_data); - } - drv_data->rx += n_bytes; - } - - msg->actual_length += drv_data->len_in_bytes; - if (drv_data->cs_change) - bfin_spi_cs_deactive(drv_data, chip); - /* Move to next transfer */ - msg->state = bfin_spi_next_transfer(drv_data); - - disable_irq_nosync(drv_data->spi_irq); - - /* Schedule transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); - return IRQ_HANDLED; - } - - if (drv_data->rx && drv_data->tx) { - /* duplex */ - dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n"); - if (n_bytes % 2) { - u16 *buf = (u16 *)drv_data->rx; - u16 *buf2 = (u16 *)drv_data->tx; - for (loop = 0; loop < n_bytes / 2; loop++) { - *buf++ = read_RDBR(drv_data); - write_TDBR(drv_data, *buf2++); - } - } else { - u8 *buf = (u8 *)drv_data->rx; - u8 *buf2 = (u8 *)drv_data->tx; - for (loop = 0; loop < n_bytes; loop++) { - *buf++ = read_RDBR(drv_data); - write_TDBR(drv_data, *buf2++); - } - } - } else if (drv_data->rx) { - /* read */ - dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n"); - if (n_bytes % 2) { - u16 *buf = (u16 *)drv_data->rx; - for (loop = 0; loop < n_bytes / 2; loop++) { - *buf++ = read_RDBR(drv_data); - write_TDBR(drv_data, chip->idle_tx_val); - } - } else { - u8 *buf = (u8 *)drv_data->rx; - for (loop = 0; loop < n_bytes; loop++) { - *buf++ = read_RDBR(drv_data); - write_TDBR(drv_data, chip->idle_tx_val); - } - } - } else if (drv_data->tx) { - /* write */ - dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n"); - if (n_bytes % 2) { - u16 *buf = (u16 *)drv_data->tx; - for (loop = 0; loop < n_bytes / 2; loop++) { - read_RDBR(drv_data); - write_TDBR(drv_data, *buf++); - } - } else { - u8 *buf = (u8 *)drv_data->tx; - for (loop = 0; loop < n_bytes; loop++) { - read_RDBR(drv_data); - write_TDBR(drv_data, *buf++); - } - } - } - - if (drv_data->tx) - drv_data->tx += n_bytes; - if (drv_data->rx) - drv_data->rx += n_bytes; - - return IRQ_HANDLED; -} - -static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) -{ - struct bfin_spi_master_data *drv_data = dev_id; - struct bfin_spi_slave_data *chip = drv_data->cur_chip; - struct spi_message *msg = drv_data->cur_msg; - unsigned long timeout; - unsigned short dmastat = get_dma_curr_irqstat(drv_data->dma_channel); - u16 spistat = read_STAT(drv_data); - - dev_dbg(&drv_data->pdev->dev, - "in dma_irq_handler dmastat:0x%x spistat:0x%x\n", - dmastat, spistat); - - if (drv_data->rx != NULL) { - u16 cr = read_CTRL(drv_data); - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - write_CTRL(drv_data, cr & ~BIT_CTL_ENABLE); /* Disable SPI */ - write_CTRL(drv_data, cr & ~BIT_CTL_TIMOD); /* Restore State */ - write_STAT(drv_data, BIT_STAT_CLR); /* Clear Status */ - } - - clear_dma_irqstat(drv_data->dma_channel); - - /* - * wait for the last transaction shifted out. HRM states: - * at this point there may still be data in the SPI DMA FIFO waiting - * to be transmitted ... software needs to poll TXS in the SPI_STAT - * register until it goes low for 2 successive reads - */ - if (drv_data->tx != NULL) { - while ((read_STAT(drv_data) & BIT_STAT_TXS) || - (read_STAT(drv_data) & BIT_STAT_TXS)) - cpu_relax(); - } - - dev_dbg(&drv_data->pdev->dev, - "in dma_irq_handler dmastat:0x%x spistat:0x%x\n", - dmastat, read_STAT(drv_data)); - - timeout = jiffies + HZ; - while (!(read_STAT(drv_data) & BIT_STAT_SPIF)) - if (!time_before(jiffies, timeout)) { - dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF"); - break; - } else - cpu_relax(); - - if ((dmastat & DMA_ERR) && (spistat & BIT_STAT_RBSY)) { - msg->state = ERROR_STATE; - dev_err(&drv_data->pdev->dev, "dma receive: fifo/buffer overflow\n"); - } else { - msg->actual_length += drv_data->len_in_bytes; - - if (drv_data->cs_change) - bfin_spi_cs_deactive(drv_data, chip); - - /* Move to next transfer */ - msg->state = bfin_spi_next_transfer(drv_data); - } - - /* Schedule transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); - - /* free the irq handler before next transfer */ - dev_dbg(&drv_data->pdev->dev, - "disable dma channel irq%d\n", - drv_data->dma_channel); - dma_disable_irq_nosync(drv_data->dma_channel); - - return IRQ_HANDLED; -} - -static void bfin_spi_pump_transfers(unsigned long data) -{ - struct bfin_spi_master_data *drv_data = (struct bfin_spi_master_data *)data; - struct spi_message *message = NULL; - struct spi_transfer *transfer = NULL; - struct spi_transfer *previous = NULL; - struct bfin_spi_slave_data *chip = NULL; - unsigned int bits_per_word; - u16 cr, cr_width, dma_width, dma_config; - u32 tranf_success = 1; - u8 full_duplex = 0; - - /* Get current state information */ - message = drv_data->cur_msg; - transfer = drv_data->cur_transfer; - chip = drv_data->cur_chip; - - /* - * if msg is error or done, report it back using complete() callback - */ - - /* Handle for abort */ - if (message->state == ERROR_STATE) { - dev_dbg(&drv_data->pdev->dev, "transfer: we've hit an error\n"); - message->status = -EIO; - bfin_spi_giveback(drv_data); - return; - } - - /* Handle end of message */ - if (message->state == DONE_STATE) { - dev_dbg(&drv_data->pdev->dev, "transfer: all done!\n"); - message->status = 0; - bfin_spi_giveback(drv_data); - return; - } - - /* Delay if requested at end of transfer */ - if (message->state == RUNNING_STATE) { - dev_dbg(&drv_data->pdev->dev, "transfer: still running ...\n"); - previous = list_entry(transfer->transfer_list.prev, - struct spi_transfer, transfer_list); - if (previous->delay_usecs) - udelay(previous->delay_usecs); - } - - /* Flush any existing transfers that may be sitting in the hardware */ - if (bfin_spi_flush(drv_data) == 0) { - dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); - message->status = -EIO; - bfin_spi_giveback(drv_data); - return; - } - - if (transfer->len == 0) { - /* Move to next transfer of this msg */ - message->state = bfin_spi_next_transfer(drv_data); - /* Schedule next transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); - return; - } - - if (transfer->tx_buf != NULL) { - drv_data->tx = (void *)transfer->tx_buf; - drv_data->tx_end = drv_data->tx + transfer->len; - dev_dbg(&drv_data->pdev->dev, "tx_buf is %p, tx_end is %p\n", - transfer->tx_buf, drv_data->tx_end); - } else { - drv_data->tx = NULL; - } - - if (transfer->rx_buf != NULL) { - full_duplex = transfer->tx_buf != NULL; - drv_data->rx = transfer->rx_buf; - drv_data->rx_end = drv_data->rx + transfer->len; - dev_dbg(&drv_data->pdev->dev, "rx_buf is %p, rx_end is %p\n", - transfer->rx_buf, drv_data->rx_end); - } else { - drv_data->rx = NULL; - } - - drv_data->rx_dma = transfer->rx_dma; - drv_data->tx_dma = transfer->tx_dma; - drv_data->len_in_bytes = transfer->len; - drv_data->cs_change = transfer->cs_change; - - /* Bits per word setup */ - bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; - if ((bits_per_word > 0) && (bits_per_word % 16 == 0)) { - drv_data->n_bytes = bits_per_word/8; - drv_data->len = (transfer->len) >> 1; - cr_width = BIT_CTL_WORDSIZE; - drv_data->ops = &bfin_bfin_spi_transfer_ops_u16; - } else if ((bits_per_word > 0) && (bits_per_word % 8 == 0)) { - drv_data->n_bytes = bits_per_word/8; - drv_data->len = transfer->len; - cr_width = 0; - drv_data->ops = &bfin_bfin_spi_transfer_ops_u8; - } else { - dev_err(&drv_data->pdev->dev, "transfer: unsupported bits_per_word\n"); - message->status = -EINVAL; - bfin_spi_giveback(drv_data); - return; - } - cr = read_CTRL(drv_data) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE); - cr |= cr_width; - write_CTRL(drv_data, cr); - - dev_dbg(&drv_data->pdev->dev, - "transfer: drv_data->ops is %p, chip->ops is %p, u8_ops is %p\n", - drv_data->ops, chip->ops, &bfin_bfin_spi_transfer_ops_u8); - - message->state = RUNNING_STATE; - dma_config = 0; - - /* Speed setup (surely valid because already checked) */ - if (transfer->speed_hz) - write_BAUD(drv_data, hz_to_spi_baud(transfer->speed_hz)); - else - write_BAUD(drv_data, chip->baud); - - write_STAT(drv_data, BIT_STAT_CLR); - bfin_spi_cs_active(drv_data, chip); - - dev_dbg(&drv_data->pdev->dev, - "now pumping a transfer: width is %d, len is %d\n", - cr_width, transfer->len); - - /* - * Try to map dma buffer and do a dma transfer. If successful use, - * different way to r/w according to the enable_dma settings and if - * we are not doing a full duplex transfer (since the hardware does - * not support full duplex DMA transfers). - */ - if (!full_duplex && drv_data->cur_chip->enable_dma - && drv_data->len > 6) { - - unsigned long dma_start_addr, flags; - - disable_dma(drv_data->dma_channel); - clear_dma_irqstat(drv_data->dma_channel); - - /* config dma channel */ - dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n"); - set_dma_x_count(drv_data->dma_channel, drv_data->len); - if (cr_width == BIT_CTL_WORDSIZE) { - set_dma_x_modify(drv_data->dma_channel, 2); - dma_width = WDSIZE_16; - } else { - set_dma_x_modify(drv_data->dma_channel, 1); - dma_width = WDSIZE_8; - } - - /* poll for SPI completion before start */ - while (!(read_STAT(drv_data) & BIT_STAT_SPIF)) - cpu_relax(); - - /* dirty hack for autobuffer DMA mode */ - if (drv_data->tx_dma == 0xFFFF) { - dev_dbg(&drv_data->pdev->dev, - "doing autobuffer DMA out.\n"); - - /* no irq in autobuffer mode */ - dma_config = - (DMAFLOW_AUTO | RESTART | dma_width | DI_EN); - set_dma_config(drv_data->dma_channel, dma_config); - set_dma_start_addr(drv_data->dma_channel, - (unsigned long)drv_data->tx); - enable_dma(drv_data->dma_channel); - - /* start SPI transfer */ - write_CTRL(drv_data, cr | BIT_CTL_TIMOD_DMA_TX); - - /* just return here, there can only be one transfer - * in this mode - */ - message->status = 0; - bfin_spi_giveback(drv_data); - return; - } - - /* In dma mode, rx or tx must be NULL in one transfer */ - dma_config = (RESTART | dma_width | DI_EN); - if (drv_data->rx != NULL) { - /* set transfer mode, and enable SPI */ - dev_dbg(&drv_data->pdev->dev, "doing DMA in to %p (size %zx)\n", - drv_data->rx, drv_data->len_in_bytes); - - /* invalidate caches, if needed */ - if (bfin_addr_dcacheable((unsigned long) drv_data->rx)) - invalidate_dcache_range((unsigned long) drv_data->rx, - (unsigned long) (drv_data->rx + - drv_data->len_in_bytes)); - - dma_config |= WNR; - dma_start_addr = (unsigned long)drv_data->rx; - cr |= BIT_CTL_TIMOD_DMA_RX | BIT_CTL_SENDOPT; - - } else if (drv_data->tx != NULL) { - dev_dbg(&drv_data->pdev->dev, "doing DMA out.\n"); - - /* flush caches, if needed */ - if (bfin_addr_dcacheable((unsigned long) drv_data->tx)) - flush_dcache_range((unsigned long) drv_data->tx, - (unsigned long) (drv_data->tx + - drv_data->len_in_bytes)); - - dma_start_addr = (unsigned long)drv_data->tx; - cr |= BIT_CTL_TIMOD_DMA_TX; - - } else - BUG(); - - /* oh man, here there be monsters ... and i dont mean the - * fluffy cute ones from pixar, i mean the kind that'll eat - * your data, kick your dog, and love it all. do *not* try - * and change these lines unless you (1) heavily test DMA - * with SPI flashes on a loaded system (e.g. ping floods), - * (2) know just how broken the DMA engine interaction with - * the SPI peripheral is, and (3) have someone else to blame - * when you screw it all up anyways. - */ - set_dma_start_addr(drv_data->dma_channel, dma_start_addr); - set_dma_config(drv_data->dma_channel, dma_config); - local_irq_save(flags); - SSYNC(); - write_CTRL(drv_data, cr); - enable_dma(drv_data->dma_channel); - dma_enable_irq(drv_data->dma_channel); - local_irq_restore(flags); - - return; - } - - /* - * We always use SPI_WRITE mode (transfer starts with TDBR write). - * SPI_READ mode (transfer starts with RDBR read) seems to have - * problems with setting up the output value in TDBR prior to the - * start of the transfer. - */ - write_CTRL(drv_data, cr | BIT_CTL_TXMOD); - - if (chip->pio_interrupt) { - /* SPI irq should have been disabled by now */ - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - /* start transfer */ - if (drv_data->tx == NULL) - write_TDBR(drv_data, chip->idle_tx_val); - else { - int loop; - if (bits_per_word % 16 == 0) { - u16 *buf = (u16 *)drv_data->tx; - for (loop = 0; loop < bits_per_word / 16; - loop++) { - write_TDBR(drv_data, *buf++); - } - } else if (bits_per_word % 8 == 0) { - u8 *buf = (u8 *)drv_data->tx; - for (loop = 0; loop < bits_per_word / 8; loop++) - write_TDBR(drv_data, *buf++); - } - - drv_data->tx += drv_data->n_bytes; - } - - /* once TDBR is empty, interrupt is triggered */ - enable_irq(drv_data->spi_irq); - return; - } - - /* IO mode */ - dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n"); - - if (full_duplex) { - /* full duplex mode */ - BUG_ON((drv_data->tx_end - drv_data->tx) != - (drv_data->rx_end - drv_data->rx)); - dev_dbg(&drv_data->pdev->dev, - "IO duplex: cr is 0x%x\n", cr); - - drv_data->ops->duplex(drv_data); - - if (drv_data->tx != drv_data->tx_end) - tranf_success = 0; - } else if (drv_data->tx != NULL) { - /* write only half duplex */ - dev_dbg(&drv_data->pdev->dev, - "IO write: cr is 0x%x\n", cr); - - drv_data->ops->write(drv_data); - - if (drv_data->tx != drv_data->tx_end) - tranf_success = 0; - } else if (drv_data->rx != NULL) { - /* read only half duplex */ - dev_dbg(&drv_data->pdev->dev, - "IO read: cr is 0x%x\n", cr); - - drv_data->ops->read(drv_data); - if (drv_data->rx != drv_data->rx_end) - tranf_success = 0; - } - - if (!tranf_success) { - dev_dbg(&drv_data->pdev->dev, - "IO write error!\n"); - message->state = ERROR_STATE; - } else { - /* Update total byte transferred */ - message->actual_length += drv_data->len_in_bytes; - /* Move to next transfer of this msg */ - message->state = bfin_spi_next_transfer(drv_data); - if (drv_data->cs_change) - bfin_spi_cs_deactive(drv_data, chip); - } - - /* Schedule next transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); -} - -/* pop a msg from queue and kick off real transfer */ -static void bfin_spi_pump_messages(struct work_struct *work) -{ - struct bfin_spi_master_data *drv_data; - unsigned long flags; - - drv_data = container_of(work, struct bfin_spi_master_data, pump_messages); - - /* Lock queue and check for queue work */ - spin_lock_irqsave(&drv_data->lock, flags); - if (list_empty(&drv_data->queue) || !drv_data->running) { - /* pumper kicked off but no work to do */ - drv_data->busy = 0; - spin_unlock_irqrestore(&drv_data->lock, flags); - return; - } - - /* Make sure we are not already running a message */ - if (drv_data->cur_msg) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return; - } - - /* Extract head of queue */ - drv_data->cur_msg = list_entry(drv_data->queue.next, - struct spi_message, queue); - - /* Setup the SSP using the per chip configuration */ - drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); - bfin_spi_restore_state(drv_data); - - list_del_init(&drv_data->cur_msg->queue); - - /* Initial message state */ - drv_data->cur_msg->state = START_STATE; - drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, - struct spi_transfer, transfer_list); - - dev_dbg(&drv_data->pdev->dev, "got a message to pump, " - "state is set to: baud %d, flag 0x%x, ctl 0x%x\n", - drv_data->cur_chip->baud, drv_data->cur_chip->flag, - drv_data->cur_chip->ctl_reg); - - dev_dbg(&drv_data->pdev->dev, - "the first transfer len is %d\n", - drv_data->cur_transfer->len); - - /* Mark as busy and launch transfers */ - tasklet_schedule(&drv_data->pump_transfers); - - drv_data->busy = 1; - spin_unlock_irqrestore(&drv_data->lock, flags); -} - -/* - * got a msg to transfer, queue it in drv_data->queue. - * And kick off message pumper - */ -static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) -{ - struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); - unsigned long flags; - - spin_lock_irqsave(&drv_data->lock, flags); - - if (!drv_data->running) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return -ESHUTDOWN; - } - - msg->actual_length = 0; - msg->status = -EINPROGRESS; - msg->state = START_STATE; - - dev_dbg(&spi->dev, "adding an msg in transfer() \n"); - list_add_tail(&msg->queue, &drv_data->queue); - - if (drv_data->running && !drv_data->busy) - queue_work(drv_data->workqueue, &drv_data->pump_messages); - - spin_unlock_irqrestore(&drv_data->lock, flags); - - return 0; -} - -#define MAX_SPI_SSEL 7 - -static u16 ssel[][MAX_SPI_SSEL] = { - {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3, - P_SPI0_SSEL4, P_SPI0_SSEL5, - P_SPI0_SSEL6, P_SPI0_SSEL7}, - - {P_SPI1_SSEL1, P_SPI1_SSEL2, P_SPI1_SSEL3, - P_SPI1_SSEL4, P_SPI1_SSEL5, - P_SPI1_SSEL6, P_SPI1_SSEL7}, - - {P_SPI2_SSEL1, P_SPI2_SSEL2, P_SPI2_SSEL3, - P_SPI2_SSEL4, P_SPI2_SSEL5, - P_SPI2_SSEL6, P_SPI2_SSEL7}, -}; - -/* setup for devices (may be called multiple times -- not just first setup) */ -static int bfin_spi_setup(struct spi_device *spi) -{ - struct bfin5xx_spi_chip *chip_info; - struct bfin_spi_slave_data *chip = NULL; - struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); - u16 bfin_ctl_reg; - int ret = -EINVAL; - - /* Only alloc (or use chip_info) on first setup */ - chip_info = NULL; - chip = spi_get_ctldata(spi); - if (chip == NULL) { - chip = kzalloc(sizeof(*chip), GFP_KERNEL); - if (!chip) { - dev_err(&spi->dev, "cannot allocate chip data\n"); - ret = -ENOMEM; - goto error; - } - - chip->enable_dma = 0; - chip_info = spi->controller_data; - } - - /* Let people set non-standard bits directly */ - bfin_ctl_reg = BIT_CTL_OPENDRAIN | BIT_CTL_EMISO | - BIT_CTL_PSSE | BIT_CTL_GM | BIT_CTL_SZ; - - /* chip_info isn't always needed */ - if (chip_info) { - /* Make sure people stop trying to set fields via ctl_reg - * when they should actually be using common SPI framework. - * Currently we let through: WOM EMISO PSSE GM SZ. - * Not sure if a user actually needs/uses any of these, - * but let's assume (for now) they do. - */ - if (chip_info->ctl_reg & ~bfin_ctl_reg) { - dev_err(&spi->dev, "do not set bits in ctl_reg " - "that the SPI framework manages\n"); - goto error; - } - chip->enable_dma = chip_info->enable_dma != 0 - && drv_data->master_info->enable_dma; - chip->ctl_reg = chip_info->ctl_reg; - chip->cs_chg_udelay = chip_info->cs_chg_udelay; - chip->idle_tx_val = chip_info->idle_tx_val; - chip->pio_interrupt = chip_info->pio_interrupt; - spi->bits_per_word = chip_info->bits_per_word; - } else { - /* force a default base state */ - chip->ctl_reg &= bfin_ctl_reg; - } - - if (spi->bits_per_word % 8) { - dev_err(&spi->dev, "%d bits_per_word is not supported\n", - spi->bits_per_word); - goto error; - } - - /* translate common spi framework into our register */ - if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) { - dev_err(&spi->dev, "unsupported spi modes detected\n"); - goto error; - } - if (spi->mode & SPI_CPOL) - chip->ctl_reg |= BIT_CTL_CPOL; - if (spi->mode & SPI_CPHA) - chip->ctl_reg |= BIT_CTL_CPHA; - if (spi->mode & SPI_LSB_FIRST) - chip->ctl_reg |= BIT_CTL_LSBF; - /* we dont support running in slave mode (yet?) */ - chip->ctl_reg |= BIT_CTL_MASTER; - - /* - * Notice: for blackfin, the speed_hz is the value of register - * SPI_BAUD, not the real baudrate - */ - chip->baud = hz_to_spi_baud(spi->max_speed_hz); - chip->chip_select_num = spi->chip_select; - if (chip->chip_select_num < MAX_CTRL_CS) { - if (!(spi->mode & SPI_CPHA)) - dev_warn(&spi->dev, "Warning: SPI CPHA not set:" - " Slave Select not under software control!\n" - " See Documentation/blackfin/bfin-spi-notes.txt"); - - chip->flag = (1 << spi->chip_select) << 8; - } else - chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS; - - if (chip->enable_dma && chip->pio_interrupt) { - dev_err(&spi->dev, "enable_dma is set, " - "do not set pio_interrupt\n"); - goto error; - } - /* - * if any one SPI chip is registered and wants DMA, request the - * DMA channel for it - */ - if (chip->enable_dma && !drv_data->dma_requested) { - /* register dma irq handler */ - ret = request_dma(drv_data->dma_channel, "BFIN_SPI_DMA"); - if (ret) { - dev_err(&spi->dev, - "Unable to request BlackFin SPI DMA channel\n"); - goto error; - } - drv_data->dma_requested = 1; - - ret = set_dma_callback(drv_data->dma_channel, - bfin_spi_dma_irq_handler, drv_data); - if (ret) { - dev_err(&spi->dev, "Unable to set dma callback\n"); - goto error; - } - dma_disable_irq(drv_data->dma_channel); - } - - if (chip->pio_interrupt && !drv_data->irq_requested) { - ret = request_irq(drv_data->spi_irq, bfin_spi_pio_irq_handler, - IRQF_DISABLED, "BFIN_SPI", drv_data); - if (ret) { - dev_err(&spi->dev, "Unable to register spi IRQ\n"); - goto error; - } - drv_data->irq_requested = 1; - /* we use write mode, spi irq has to be disabled here */ - disable_irq(drv_data->spi_irq); - } - - if (chip->chip_select_num >= MAX_CTRL_CS) { - /* Only request on first setup */ - if (spi_get_ctldata(spi) == NULL) { - ret = gpio_request(chip->cs_gpio, spi->modalias); - if (ret) { - dev_err(&spi->dev, "gpio_request() error\n"); - goto pin_error; - } - gpio_direction_output(chip->cs_gpio, 1); - } - } - - dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n", - spi->modalias, spi->bits_per_word, chip->enable_dma); - dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n", - chip->ctl_reg, chip->flag); - - spi_set_ctldata(spi, chip); - - dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num); - if (chip->chip_select_num < MAX_CTRL_CS) { - ret = peripheral_request(ssel[spi->master->bus_num] - [chip->chip_select_num-1], spi->modalias); - if (ret) { - dev_err(&spi->dev, "peripheral_request() error\n"); - goto pin_error; - } - } - - bfin_spi_cs_enable(drv_data, chip); - bfin_spi_cs_deactive(drv_data, chip); - - return 0; - - pin_error: - if (chip->chip_select_num >= MAX_CTRL_CS) - gpio_free(chip->cs_gpio); - else - peripheral_free(ssel[spi->master->bus_num] - [chip->chip_select_num - 1]); - error: - if (chip) { - if (drv_data->dma_requested) - free_dma(drv_data->dma_channel); - drv_data->dma_requested = 0; - - kfree(chip); - /* prevent free 'chip' twice */ - spi_set_ctldata(spi, NULL); - } - - return ret; -} - -/* - * callback for spi framework. - * clean driver specific data - */ -static void bfin_spi_cleanup(struct spi_device *spi) -{ - struct bfin_spi_slave_data *chip = spi_get_ctldata(spi); - struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); - - if (!chip) - return; - - if (chip->chip_select_num < MAX_CTRL_CS) { - peripheral_free(ssel[spi->master->bus_num] - [chip->chip_select_num-1]); - bfin_spi_cs_disable(drv_data, chip); - } else - gpio_free(chip->cs_gpio); - - kfree(chip); - /* prevent free 'chip' twice */ - spi_set_ctldata(spi, NULL); -} - -static inline int bfin_spi_init_queue(struct bfin_spi_master_data *drv_data) -{ - INIT_LIST_HEAD(&drv_data->queue); - spin_lock_init(&drv_data->lock); - - drv_data->running = false; - drv_data->busy = 0; - - /* init transfer tasklet */ - tasklet_init(&drv_data->pump_transfers, - bfin_spi_pump_transfers, (unsigned long)drv_data); - - /* init messages workqueue */ - INIT_WORK(&drv_data->pump_messages, bfin_spi_pump_messages); - drv_data->workqueue = create_singlethread_workqueue( - dev_name(drv_data->master->dev.parent)); - if (drv_data->workqueue == NULL) - return -EBUSY; - - return 0; -} - -static inline int bfin_spi_start_queue(struct bfin_spi_master_data *drv_data) -{ - unsigned long flags; - - spin_lock_irqsave(&drv_data->lock, flags); - - if (drv_data->running || drv_data->busy) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return -EBUSY; - } - - drv_data->running = true; - drv_data->cur_msg = NULL; - drv_data->cur_transfer = NULL; - drv_data->cur_chip = NULL; - spin_unlock_irqrestore(&drv_data->lock, flags); - - queue_work(drv_data->workqueue, &drv_data->pump_messages); - - return 0; -} - -static inline int bfin_spi_stop_queue(struct bfin_spi_master_data *drv_data) -{ - unsigned long flags; - unsigned limit = 500; - int status = 0; - - spin_lock_irqsave(&drv_data->lock, flags); - - /* - * This is a bit lame, but is optimized for the common execution path. - * A wait_queue on the drv_data->busy could be used, but then the common - * execution path (pump_messages) would be required to call wake_up or - * friends on every SPI message. Do this instead - */ - drv_data->running = false; - while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) { - spin_unlock_irqrestore(&drv_data->lock, flags); - msleep(10); - spin_lock_irqsave(&drv_data->lock, flags); - } - - if (!list_empty(&drv_data->queue) || drv_data->busy) - status = -EBUSY; - - spin_unlock_irqrestore(&drv_data->lock, flags); - - return status; -} - -static inline int bfin_spi_destroy_queue(struct bfin_spi_master_data *drv_data) -{ - int status; - - status = bfin_spi_stop_queue(drv_data); - if (status != 0) - return status; - - destroy_workqueue(drv_data->workqueue); - - return 0; -} - -static int __init bfin_spi_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct bfin5xx_spi_master *platform_info; - struct spi_master *master; - struct bfin_spi_master_data *drv_data; - struct resource *res; - int status = 0; - - platform_info = dev->platform_data; - - /* Allocate master with space for drv_data */ - master = spi_alloc_master(dev, sizeof(*drv_data)); - if (!master) { - dev_err(&pdev->dev, "can not alloc spi_master\n"); - return -ENOMEM; - } - - drv_data = spi_master_get_devdata(master); - drv_data->master = master; - drv_data->master_info = platform_info; - drv_data->pdev = pdev; - drv_data->pin_req = platform_info->pin_req; - - /* the spi->mode bits supported by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; - - master->bus_num = pdev->id; - master->num_chipselect = platform_info->num_chipselect; - master->cleanup = bfin_spi_cleanup; - master->setup = bfin_spi_setup; - master->transfer = bfin_spi_transfer; - - /* Find and map our resources */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(dev, "Cannot get IORESOURCE_MEM\n"); - status = -ENOENT; - goto out_error_get_res; - } - - drv_data->regs_base = ioremap(res->start, resource_size(res)); - if (drv_data->regs_base == NULL) { - dev_err(dev, "Cannot map IO\n"); - status = -ENXIO; - goto out_error_ioremap; - } - - res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (res == NULL) { - dev_err(dev, "No DMA channel specified\n"); - status = -ENOENT; - goto out_error_free_io; - } - drv_data->dma_channel = res->start; - - drv_data->spi_irq = platform_get_irq(pdev, 0); - if (drv_data->spi_irq < 0) { - dev_err(dev, "No spi pio irq specified\n"); - status = -ENOENT; - goto out_error_free_io; - } - - /* Initial and start queue */ - status = bfin_spi_init_queue(drv_data); - if (status != 0) { - dev_err(dev, "problem initializing queue\n"); - goto out_error_queue_alloc; - } - - status = bfin_spi_start_queue(drv_data); - if (status != 0) { - dev_err(dev, "problem starting queue\n"); - goto out_error_queue_alloc; - } - - status = peripheral_request_list(drv_data->pin_req, DRV_NAME); - if (status != 0) { - dev_err(&pdev->dev, ": Requesting Peripherals failed\n"); - goto out_error_queue_alloc; - } - - /* Reset SPI registers. If these registers were used by the boot loader, - * the sky may fall on your head if you enable the dma controller. - */ - write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); - write_FLAG(drv_data, 0xFF00); - - /* Register with the SPI framework */ - platform_set_drvdata(pdev, drv_data); - status = spi_register_master(master); - if (status != 0) { - dev_err(dev, "problem registering spi master\n"); - goto out_error_queue_alloc; - } - - dev_info(dev, "%s, Version %s, regs_base@%p, dma channel@%d\n", - DRV_DESC, DRV_VERSION, drv_data->regs_base, - drv_data->dma_channel); - return status; - -out_error_queue_alloc: - bfin_spi_destroy_queue(drv_data); -out_error_free_io: - iounmap((void *) drv_data->regs_base); -out_error_ioremap: -out_error_get_res: - spi_master_put(master); - - return status; -} - -/* stop hardware and remove the driver */ -static int __devexit bfin_spi_remove(struct platform_device *pdev) -{ - struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); - int status = 0; - - if (!drv_data) - return 0; - - /* Remove the queue */ - status = bfin_spi_destroy_queue(drv_data); - if (status != 0) - return status; - - /* Disable the SSP at the peripheral and SOC level */ - bfin_spi_disable(drv_data); - - /* Release DMA */ - if (drv_data->master_info->enable_dma) { - if (dma_channel_active(drv_data->dma_channel)) - free_dma(drv_data->dma_channel); - } - - if (drv_data->irq_requested) { - free_irq(drv_data->spi_irq, drv_data); - drv_data->irq_requested = 0; - } - - /* Disconnect from the SPI framework */ - spi_unregister_master(drv_data->master); - - peripheral_free_list(drv_data->pin_req); - - /* Prevent double remove */ - platform_set_drvdata(pdev, NULL); - - return 0; -} - -#ifdef CONFIG_PM -static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); - int status = 0; - - status = bfin_spi_stop_queue(drv_data); - if (status != 0) - return status; - - drv_data->ctrl_reg = read_CTRL(drv_data); - drv_data->flag_reg = read_FLAG(drv_data); - - /* - * reset SPI_CTL and SPI_FLG registers - */ - write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); - write_FLAG(drv_data, 0xFF00); - - return 0; -} - -static int bfin_spi_resume(struct platform_device *pdev) -{ - struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); - int status = 0; - - write_CTRL(drv_data, drv_data->ctrl_reg); - write_FLAG(drv_data, drv_data->flag_reg); - - /* Start the queue running */ - status = bfin_spi_start_queue(drv_data); - if (status != 0) { - dev_err(&pdev->dev, "problem starting queue (%d)\n", status); - return status; - } - - return 0; -} -#else -#define bfin_spi_suspend NULL -#define bfin_spi_resume NULL -#endif /* CONFIG_PM */ - -MODULE_ALIAS("platform:bfin-spi"); -static struct platform_driver bfin_spi_driver = { - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, - .suspend = bfin_spi_suspend, - .resume = bfin_spi_resume, - .remove = __devexit_p(bfin_spi_remove), -}; - -static int __init bfin_spi_init(void) -{ - return platform_driver_probe(&bfin_spi_driver, bfin_spi_probe); -} -subsys_initcall(bfin_spi_init); - -static void __exit bfin_spi_exit(void) -{ - platform_driver_unregister(&bfin_spi_driver); -} -module_exit(bfin_spi_exit); diff --git a/drivers/spi/spi_bfin_sport.c b/drivers/spi/spi_bfin_sport.c deleted file mode 100644 index e557ff617b11..000000000000 --- a/drivers/spi/spi_bfin_sport.c +++ /dev/null @@ -1,952 +0,0 @@ -/* - * SPI bus via the Blackfin SPORT peripheral - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Copyright 2009-2011 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#define DRV_NAME "bfin-sport-spi" -#define DRV_DESC "SPI bus via the Blackfin SPORT" - -MODULE_AUTHOR("Cliff Cai"); -MODULE_DESCRIPTION(DRV_DESC); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:bfin-sport-spi"); - -enum bfin_sport_spi_state { - START_STATE, - RUNNING_STATE, - DONE_STATE, - ERROR_STATE, -}; - -struct bfin_sport_spi_master_data; - -struct bfin_sport_transfer_ops { - void (*write) (struct bfin_sport_spi_master_data *); - void (*read) (struct bfin_sport_spi_master_data *); - void (*duplex) (struct bfin_sport_spi_master_data *); -}; - -struct bfin_sport_spi_master_data { - /* Driver model hookup */ - struct device *dev; - - /* SPI framework hookup */ - struct spi_master *master; - - /* Regs base of SPI controller */ - struct sport_register __iomem *regs; - int err_irq; - - /* Pin request list */ - u16 *pin_req; - - /* Driver message queue */ - struct workqueue_struct *workqueue; - struct work_struct pump_messages; - spinlock_t lock; - struct list_head queue; - int busy; - bool run; - - /* Message Transfer pump */ - struct tasklet_struct pump_transfers; - - /* Current message transfer state info */ - enum bfin_sport_spi_state state; - struct spi_message *cur_msg; - struct spi_transfer *cur_transfer; - struct bfin_sport_spi_slave_data *cur_chip; - union { - void *tx; - u8 *tx8; - u16 *tx16; - }; - void *tx_end; - union { - void *rx; - u8 *rx8; - u16 *rx16; - }; - void *rx_end; - - int cs_change; - struct bfin_sport_transfer_ops *ops; -}; - -struct bfin_sport_spi_slave_data { - u16 ctl_reg; - u16 baud; - u16 cs_chg_udelay; /* Some devices require > 255usec delay */ - u32 cs_gpio; - u16 idle_tx_val; - struct bfin_sport_transfer_ops *ops; -}; - -static void -bfin_sport_spi_enable(struct bfin_sport_spi_master_data *drv_data) -{ - bfin_write_or(&drv_data->regs->tcr1, TSPEN); - bfin_write_or(&drv_data->regs->rcr1, TSPEN); - SSYNC(); -} - -static void -bfin_sport_spi_disable(struct bfin_sport_spi_master_data *drv_data) -{ - bfin_write_and(&drv_data->regs->tcr1, ~TSPEN); - bfin_write_and(&drv_data->regs->rcr1, ~TSPEN); - SSYNC(); -} - -/* Caculate the SPI_BAUD register value based on input HZ */ -static u16 -bfin_sport_hz_to_spi_baud(u32 speed_hz) -{ - u_long clk, sclk = get_sclk(); - int div = (sclk / (2 * speed_hz)) - 1; - - if (div < 0) - div = 0; - - clk = sclk / (2 * (div + 1)); - - if (clk > speed_hz) - div++; - - return div; -} - -/* Chip select operation functions for cs_change flag */ -static void -bfin_sport_spi_cs_active(struct bfin_sport_spi_slave_data *chip) -{ - gpio_direction_output(chip->cs_gpio, 0); -} - -static void -bfin_sport_spi_cs_deactive(struct bfin_sport_spi_slave_data *chip) -{ - gpio_direction_output(chip->cs_gpio, 1); - /* Move delay here for consistency */ - if (chip->cs_chg_udelay) - udelay(chip->cs_chg_udelay); -} - -static void -bfin_sport_spi_stat_poll_complete(struct bfin_sport_spi_master_data *drv_data) -{ - unsigned long timeout = jiffies + HZ; - while (!(bfin_read(&drv_data->regs->stat) & RXNE)) { - if (!time_before(jiffies, timeout)) - break; - } -} - -static void -bfin_sport_spi_u8_writer(struct bfin_sport_spi_master_data *drv_data) -{ - u16 dummy; - - while (drv_data->tx < drv_data->tx_end) { - bfin_write(&drv_data->regs->tx16, *drv_data->tx8++); - bfin_sport_spi_stat_poll_complete(drv_data); - dummy = bfin_read(&drv_data->regs->rx16); - } -} - -static void -bfin_sport_spi_u8_reader(struct bfin_sport_spi_master_data *drv_data) -{ - u16 tx_val = drv_data->cur_chip->idle_tx_val; - - while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tx16, tx_val); - bfin_sport_spi_stat_poll_complete(drv_data); - *drv_data->rx8++ = bfin_read(&drv_data->regs->rx16); - } -} - -static void -bfin_sport_spi_u8_duplex(struct bfin_sport_spi_master_data *drv_data) -{ - while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tx16, *drv_data->tx8++); - bfin_sport_spi_stat_poll_complete(drv_data); - *drv_data->rx8++ = bfin_read(&drv_data->regs->rx16); - } -} - -static struct bfin_sport_transfer_ops bfin_sport_transfer_ops_u8 = { - .write = bfin_sport_spi_u8_writer, - .read = bfin_sport_spi_u8_reader, - .duplex = bfin_sport_spi_u8_duplex, -}; - -static void -bfin_sport_spi_u16_writer(struct bfin_sport_spi_master_data *drv_data) -{ - u16 dummy; - - while (drv_data->tx < drv_data->tx_end) { - bfin_write(&drv_data->regs->tx16, *drv_data->tx16++); - bfin_sport_spi_stat_poll_complete(drv_data); - dummy = bfin_read(&drv_data->regs->rx16); - } -} - -static void -bfin_sport_spi_u16_reader(struct bfin_sport_spi_master_data *drv_data) -{ - u16 tx_val = drv_data->cur_chip->idle_tx_val; - - while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tx16, tx_val); - bfin_sport_spi_stat_poll_complete(drv_data); - *drv_data->rx16++ = bfin_read(&drv_data->regs->rx16); - } -} - -static void -bfin_sport_spi_u16_duplex(struct bfin_sport_spi_master_data *drv_data) -{ - while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tx16, *drv_data->tx16++); - bfin_sport_spi_stat_poll_complete(drv_data); - *drv_data->rx16++ = bfin_read(&drv_data->regs->rx16); - } -} - -static struct bfin_sport_transfer_ops bfin_sport_transfer_ops_u16 = { - .write = bfin_sport_spi_u16_writer, - .read = bfin_sport_spi_u16_reader, - .duplex = bfin_sport_spi_u16_duplex, -}; - -/* stop controller and re-config current chip */ -static void -bfin_sport_spi_restore_state(struct bfin_sport_spi_master_data *drv_data) -{ - struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip; - unsigned int bits = (drv_data->ops == &bfin_sport_transfer_ops_u8 ? 7 : 15); - - bfin_sport_spi_disable(drv_data); - dev_dbg(drv_data->dev, "restoring spi ctl state\n"); - - bfin_write(&drv_data->regs->tcr1, chip->ctl_reg); - bfin_write(&drv_data->regs->tcr2, bits); - bfin_write(&drv_data->regs->tclkdiv, chip->baud); - bfin_write(&drv_data->regs->tfsdiv, bits); - SSYNC(); - - bfin_write(&drv_data->regs->rcr1, chip->ctl_reg & ~(ITCLK | ITFS)); - bfin_write(&drv_data->regs->rcr2, bits); - SSYNC(); - - bfin_sport_spi_cs_active(chip); -} - -/* test if there is more transfer to be done */ -static enum bfin_sport_spi_state -bfin_sport_spi_next_transfer(struct bfin_sport_spi_master_data *drv_data) -{ - struct spi_message *msg = drv_data->cur_msg; - struct spi_transfer *trans = drv_data->cur_transfer; - - /* Move to next transfer */ - if (trans->transfer_list.next != &msg->transfers) { - drv_data->cur_transfer = - list_entry(trans->transfer_list.next, - struct spi_transfer, transfer_list); - return RUNNING_STATE; - } - - return DONE_STATE; -} - -/* - * caller already set message->status; - * dma and pio irqs are blocked give finished message back - */ -static void -bfin_sport_spi_giveback(struct bfin_sport_spi_master_data *drv_data) -{ - struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip; - unsigned long flags; - struct spi_message *msg; - - spin_lock_irqsave(&drv_data->lock, flags); - msg = drv_data->cur_msg; - drv_data->state = START_STATE; - drv_data->cur_msg = NULL; - drv_data->cur_transfer = NULL; - drv_data->cur_chip = NULL; - queue_work(drv_data->workqueue, &drv_data->pump_messages); - spin_unlock_irqrestore(&drv_data->lock, flags); - - if (!drv_data->cs_change) - bfin_sport_spi_cs_deactive(chip); - - if (msg->complete) - msg->complete(msg->context); -} - -static irqreturn_t -sport_err_handler(int irq, void *dev_id) -{ - struct bfin_sport_spi_master_data *drv_data = dev_id; - u16 status; - - dev_dbg(drv_data->dev, "%s enter\n", __func__); - status = bfin_read(&drv_data->regs->stat) & (TOVF | TUVF | ROVF | RUVF); - - if (status) { - bfin_write(&drv_data->regs->stat, status); - SSYNC(); - - bfin_sport_spi_disable(drv_data); - dev_err(drv_data->dev, "status error:%s%s%s%s\n", - status & TOVF ? " TOVF" : "", - status & TUVF ? " TUVF" : "", - status & ROVF ? " ROVF" : "", - status & RUVF ? " RUVF" : ""); - } - - return IRQ_HANDLED; -} - -static void -bfin_sport_spi_pump_transfers(unsigned long data) -{ - struct bfin_sport_spi_master_data *drv_data = (void *)data; - struct spi_message *message = NULL; - struct spi_transfer *transfer = NULL; - struct spi_transfer *previous = NULL; - struct bfin_sport_spi_slave_data *chip = NULL; - unsigned int bits_per_word; - u32 tranf_success = 1; - u32 transfer_speed; - u8 full_duplex = 0; - - /* Get current state information */ - message = drv_data->cur_msg; - transfer = drv_data->cur_transfer; - chip = drv_data->cur_chip; - - if (transfer->speed_hz) - transfer_speed = bfin_sport_hz_to_spi_baud(transfer->speed_hz); - else - transfer_speed = chip->baud; - bfin_write(&drv_data->regs->tclkdiv, transfer_speed); - SSYNC(); - - /* - * if msg is error or done, report it back using complete() callback - */ - - /* Handle for abort */ - if (drv_data->state == ERROR_STATE) { - dev_dbg(drv_data->dev, "transfer: we've hit an error\n"); - message->status = -EIO; - bfin_sport_spi_giveback(drv_data); - return; - } - - /* Handle end of message */ - if (drv_data->state == DONE_STATE) { - dev_dbg(drv_data->dev, "transfer: all done!\n"); - message->status = 0; - bfin_sport_spi_giveback(drv_data); - return; - } - - /* Delay if requested at end of transfer */ - if (drv_data->state == RUNNING_STATE) { - dev_dbg(drv_data->dev, "transfer: still running ...\n"); - previous = list_entry(transfer->transfer_list.prev, - struct spi_transfer, transfer_list); - if (previous->delay_usecs) - udelay(previous->delay_usecs); - } - - if (transfer->len == 0) { - /* Move to next transfer of this msg */ - drv_data->state = bfin_sport_spi_next_transfer(drv_data); - /* Schedule next transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); - } - - if (transfer->tx_buf != NULL) { - drv_data->tx = (void *)transfer->tx_buf; - drv_data->tx_end = drv_data->tx + transfer->len; - dev_dbg(drv_data->dev, "tx_buf is %p, tx_end is %p\n", - transfer->tx_buf, drv_data->tx_end); - } else - drv_data->tx = NULL; - - if (transfer->rx_buf != NULL) { - full_duplex = transfer->tx_buf != NULL; - drv_data->rx = transfer->rx_buf; - drv_data->rx_end = drv_data->rx + transfer->len; - dev_dbg(drv_data->dev, "rx_buf is %p, rx_end is %p\n", - transfer->rx_buf, drv_data->rx_end); - } else - drv_data->rx = NULL; - - drv_data->cs_change = transfer->cs_change; - - /* Bits per word setup */ - bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; - if (bits_per_word == 8) - drv_data->ops = &bfin_sport_transfer_ops_u8; - else - drv_data->ops = &bfin_sport_transfer_ops_u16; - - drv_data->state = RUNNING_STATE; - - if (drv_data->cs_change) - bfin_sport_spi_cs_active(chip); - - dev_dbg(drv_data->dev, - "now pumping a transfer: width is %d, len is %d\n", - bits_per_word, transfer->len); - - /* PIO mode write then read */ - dev_dbg(drv_data->dev, "doing IO transfer\n"); - - bfin_sport_spi_enable(drv_data); - if (full_duplex) { - /* full duplex mode */ - BUG_ON((drv_data->tx_end - drv_data->tx) != - (drv_data->rx_end - drv_data->rx)); - drv_data->ops->duplex(drv_data); - - if (drv_data->tx != drv_data->tx_end) - tranf_success = 0; - } else if (drv_data->tx != NULL) { - /* write only half duplex */ - - drv_data->ops->write(drv_data); - - if (drv_data->tx != drv_data->tx_end) - tranf_success = 0; - } else if (drv_data->rx != NULL) { - /* read only half duplex */ - - drv_data->ops->read(drv_data); - if (drv_data->rx != drv_data->rx_end) - tranf_success = 0; - } - bfin_sport_spi_disable(drv_data); - - if (!tranf_success) { - dev_dbg(drv_data->dev, "IO write error!\n"); - drv_data->state = ERROR_STATE; - } else { - /* Update total byte transfered */ - message->actual_length += transfer->len; - /* Move to next transfer of this msg */ - drv_data->state = bfin_sport_spi_next_transfer(drv_data); - if (drv_data->cs_change) - bfin_sport_spi_cs_deactive(chip); - } - - /* Schedule next transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); -} - -/* pop a msg from queue and kick off real transfer */ -static void -bfin_sport_spi_pump_messages(struct work_struct *work) -{ - struct bfin_sport_spi_master_data *drv_data; - unsigned long flags; - struct spi_message *next_msg; - - drv_data = container_of(work, struct bfin_sport_spi_master_data, pump_messages); - - /* Lock queue and check for queue work */ - spin_lock_irqsave(&drv_data->lock, flags); - if (list_empty(&drv_data->queue) || !drv_data->run) { - /* pumper kicked off but no work to do */ - drv_data->busy = 0; - spin_unlock_irqrestore(&drv_data->lock, flags); - return; - } - - /* Make sure we are not already running a message */ - if (drv_data->cur_msg) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return; - } - - /* Extract head of queue */ - next_msg = list_entry(drv_data->queue.next, - struct spi_message, queue); - - drv_data->cur_msg = next_msg; - - /* Setup the SSP using the per chip configuration */ - drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); - - list_del_init(&drv_data->cur_msg->queue); - - /* Initialize message state */ - drv_data->cur_msg->state = START_STATE; - drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, - struct spi_transfer, transfer_list); - bfin_sport_spi_restore_state(drv_data); - dev_dbg(drv_data->dev, "got a message to pump, " - "state is set to: baud %d, cs_gpio %i, ctl 0x%x\n", - drv_data->cur_chip->baud, drv_data->cur_chip->cs_gpio, - drv_data->cur_chip->ctl_reg); - - dev_dbg(drv_data->dev, - "the first transfer len is %d\n", - drv_data->cur_transfer->len); - - /* Mark as busy and launch transfers */ - tasklet_schedule(&drv_data->pump_transfers); - - drv_data->busy = 1; - spin_unlock_irqrestore(&drv_data->lock, flags); -} - -/* - * got a msg to transfer, queue it in drv_data->queue. - * And kick off message pumper - */ -static int -bfin_sport_spi_transfer(struct spi_device *spi, struct spi_message *msg) -{ - struct bfin_sport_spi_master_data *drv_data = spi_master_get_devdata(spi->master); - unsigned long flags; - - spin_lock_irqsave(&drv_data->lock, flags); - - if (!drv_data->run) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return -ESHUTDOWN; - } - - msg->actual_length = 0; - msg->status = -EINPROGRESS; - msg->state = START_STATE; - - dev_dbg(&spi->dev, "adding an msg in transfer()\n"); - list_add_tail(&msg->queue, &drv_data->queue); - - if (drv_data->run && !drv_data->busy) - queue_work(drv_data->workqueue, &drv_data->pump_messages); - - spin_unlock_irqrestore(&drv_data->lock, flags); - - return 0; -} - -/* Called every time common spi devices change state */ -static int -bfin_sport_spi_setup(struct spi_device *spi) -{ - struct bfin_sport_spi_slave_data *chip, *first = NULL; - int ret; - - /* Only alloc (or use chip_info) on first setup */ - chip = spi_get_ctldata(spi); - if (chip == NULL) { - struct bfin5xx_spi_chip *chip_info; - - chip = first = kzalloc(sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - - /* platform chip_info isn't required */ - chip_info = spi->controller_data; - if (chip_info) { - /* - * DITFS and TDTYPE are only thing we don't set, but - * they probably shouldn't be changed by people. - */ - if (chip_info->ctl_reg || chip_info->enable_dma) { - ret = -EINVAL; - dev_err(&spi->dev, "don't set ctl_reg/enable_dma fields"); - goto error; - } - chip->cs_chg_udelay = chip_info->cs_chg_udelay; - chip->idle_tx_val = chip_info->idle_tx_val; - spi->bits_per_word = chip_info->bits_per_word; - } - } - - if (spi->bits_per_word != 8 && spi->bits_per_word != 16) { - ret = -EINVAL; - goto error; - } - - /* translate common spi framework into our register - * following configure contents are same for tx and rx. - */ - - if (spi->mode & SPI_CPHA) - chip->ctl_reg &= ~TCKFE; - else - chip->ctl_reg |= TCKFE; - - if (spi->mode & SPI_LSB_FIRST) - chip->ctl_reg |= TLSBIT; - else - chip->ctl_reg &= ~TLSBIT; - - /* Sport in master mode */ - chip->ctl_reg |= ITCLK | ITFS | TFSR | LATFS | LTFS; - - chip->baud = bfin_sport_hz_to_spi_baud(spi->max_speed_hz); - - chip->cs_gpio = spi->chip_select; - ret = gpio_request(chip->cs_gpio, spi->modalias); - if (ret) - goto error; - - dev_dbg(&spi->dev, "setup spi chip %s, width is %d\n", - spi->modalias, spi->bits_per_word); - dev_dbg(&spi->dev, "ctl_reg is 0x%x, GPIO is %i\n", - chip->ctl_reg, spi->chip_select); - - spi_set_ctldata(spi, chip); - - bfin_sport_spi_cs_deactive(chip); - - return ret; - - error: - kfree(first); - return ret; -} - -/* - * callback for spi framework. - * clean driver specific data - */ -static void -bfin_sport_spi_cleanup(struct spi_device *spi) -{ - struct bfin_sport_spi_slave_data *chip = spi_get_ctldata(spi); - - if (!chip) - return; - - gpio_free(chip->cs_gpio); - - kfree(chip); -} - -static int -bfin_sport_spi_init_queue(struct bfin_sport_spi_master_data *drv_data) -{ - INIT_LIST_HEAD(&drv_data->queue); - spin_lock_init(&drv_data->lock); - - drv_data->run = false; - drv_data->busy = 0; - - /* init transfer tasklet */ - tasklet_init(&drv_data->pump_transfers, - bfin_sport_spi_pump_transfers, (unsigned long)drv_data); - - /* init messages workqueue */ - INIT_WORK(&drv_data->pump_messages, bfin_sport_spi_pump_messages); - drv_data->workqueue = - create_singlethread_workqueue(dev_name(drv_data->master->dev.parent)); - if (drv_data->workqueue == NULL) - return -EBUSY; - - return 0; -} - -static int -bfin_sport_spi_start_queue(struct bfin_sport_spi_master_data *drv_data) -{ - unsigned long flags; - - spin_lock_irqsave(&drv_data->lock, flags); - - if (drv_data->run || drv_data->busy) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return -EBUSY; - } - - drv_data->run = true; - drv_data->cur_msg = NULL; - drv_data->cur_transfer = NULL; - drv_data->cur_chip = NULL; - spin_unlock_irqrestore(&drv_data->lock, flags); - - queue_work(drv_data->workqueue, &drv_data->pump_messages); - - return 0; -} - -static inline int -bfin_sport_spi_stop_queue(struct bfin_sport_spi_master_data *drv_data) -{ - unsigned long flags; - unsigned limit = 500; - int status = 0; - - spin_lock_irqsave(&drv_data->lock, flags); - - /* - * This is a bit lame, but is optimized for the common execution path. - * A wait_queue on the drv_data->busy could be used, but then the common - * execution path (pump_messages) would be required to call wake_up or - * friends on every SPI message. Do this instead - */ - drv_data->run = false; - while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { - spin_unlock_irqrestore(&drv_data->lock, flags); - msleep(10); - spin_lock_irqsave(&drv_data->lock, flags); - } - - if (!list_empty(&drv_data->queue) || drv_data->busy) - status = -EBUSY; - - spin_unlock_irqrestore(&drv_data->lock, flags); - - return status; -} - -static inline int -bfin_sport_spi_destroy_queue(struct bfin_sport_spi_master_data *drv_data) -{ - int status; - - status = bfin_sport_spi_stop_queue(drv_data); - if (status) - return status; - - destroy_workqueue(drv_data->workqueue); - - return 0; -} - -static int __devinit -bfin_sport_spi_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct bfin5xx_spi_master *platform_info; - struct spi_master *master; - struct resource *res, *ires; - struct bfin_sport_spi_master_data *drv_data; - int status; - - platform_info = dev->platform_data; - - /* Allocate master with space for drv_data */ - master = spi_alloc_master(dev, sizeof(*master) + 16); - if (!master) { - dev_err(dev, "cannot alloc spi_master\n"); - return -ENOMEM; - } - - drv_data = spi_master_get_devdata(master); - drv_data->master = master; - drv_data->dev = dev; - drv_data->pin_req = platform_info->pin_req; - - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; - master->bus_num = pdev->id; - master->num_chipselect = platform_info->num_chipselect; - master->cleanup = bfin_sport_spi_cleanup; - master->setup = bfin_sport_spi_setup; - master->transfer = bfin_sport_spi_transfer; - - /* Find and map our resources */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(dev, "cannot get IORESOURCE_MEM\n"); - status = -ENOENT; - goto out_error_get_res; - } - - drv_data->regs = ioremap(res->start, resource_size(res)); - if (drv_data->regs == NULL) { - dev_err(dev, "cannot map registers\n"); - status = -ENXIO; - goto out_error_ioremap; - } - - ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!ires) { - dev_err(dev, "cannot get IORESOURCE_IRQ\n"); - status = -ENODEV; - goto out_error_get_ires; - } - drv_data->err_irq = ires->start; - - /* Initial and start queue */ - status = bfin_sport_spi_init_queue(drv_data); - if (status) { - dev_err(dev, "problem initializing queue\n"); - goto out_error_queue_alloc; - } - - status = bfin_sport_spi_start_queue(drv_data); - if (status) { - dev_err(dev, "problem starting queue\n"); - goto out_error_queue_alloc; - } - - status = request_irq(drv_data->err_irq, sport_err_handler, - 0, "sport_spi_err", drv_data); - if (status) { - dev_err(dev, "unable to request sport err irq\n"); - goto out_error_irq; - } - - status = peripheral_request_list(drv_data->pin_req, DRV_NAME); - if (status) { - dev_err(dev, "requesting peripherals failed\n"); - goto out_error_peripheral; - } - - /* Register with the SPI framework */ - platform_set_drvdata(pdev, drv_data); - status = spi_register_master(master); - if (status) { - dev_err(dev, "problem registering spi master\n"); - goto out_error_master; - } - - dev_info(dev, "%s, regs_base@%p\n", DRV_DESC, drv_data->regs); - return 0; - - out_error_master: - peripheral_free_list(drv_data->pin_req); - out_error_peripheral: - free_irq(drv_data->err_irq, drv_data); - out_error_irq: - out_error_queue_alloc: - bfin_sport_spi_destroy_queue(drv_data); - out_error_get_ires: - iounmap(drv_data->regs); - out_error_ioremap: - out_error_get_res: - spi_master_put(master); - - return status; -} - -/* stop hardware and remove the driver */ -static int __devexit -bfin_sport_spi_remove(struct platform_device *pdev) -{ - struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev); - int status = 0; - - if (!drv_data) - return 0; - - /* Remove the queue */ - status = bfin_sport_spi_destroy_queue(drv_data); - if (status) - return status; - - /* Disable the SSP at the peripheral and SOC level */ - bfin_sport_spi_disable(drv_data); - - /* Disconnect from the SPI framework */ - spi_unregister_master(drv_data->master); - - peripheral_free_list(drv_data->pin_req); - - /* Prevent double remove */ - platform_set_drvdata(pdev, NULL); - - return 0; -} - -#ifdef CONFIG_PM -static int -bfin_sport_spi_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev); - int status; - - status = bfin_sport_spi_stop_queue(drv_data); - if (status) - return status; - - /* stop hardware */ - bfin_sport_spi_disable(drv_data); - - return status; -} - -static int -bfin_sport_spi_resume(struct platform_device *pdev) -{ - struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev); - int status; - - /* Enable the SPI interface */ - bfin_sport_spi_enable(drv_data); - - /* Start the queue running */ - status = bfin_sport_spi_start_queue(drv_data); - if (status) - dev_err(drv_data->dev, "problem resuming queue\n"); - - return status; -} -#else -# define bfin_sport_spi_suspend NULL -# define bfin_sport_spi_resume NULL -#endif - -static struct platform_driver bfin_sport_spi_driver = { - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, - .probe = bfin_sport_spi_probe, - .remove = __devexit_p(bfin_sport_spi_remove), - .suspend = bfin_sport_spi_suspend, - .resume = bfin_sport_spi_resume, -}; - -static int __init bfin_sport_spi_init(void) -{ - return platform_driver_register(&bfin_sport_spi_driver); -} -module_init(bfin_sport_spi_init); - -static void __exit bfin_sport_spi_exit(void) -{ - platform_driver_unregister(&bfin_sport_spi_driver); -} -module_exit(bfin_sport_spi_exit); diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c deleted file mode 100644 index bb38c83ba210..000000000000 --- a/drivers/spi/spi_bitbang.c +++ /dev/null @@ -1,505 +0,0 @@ -/* - * spi_bitbang.c - polling/bitbanging SPI master controller driver utilities - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - - -/*----------------------------------------------------------------------*/ - -/* - * FIRST PART (OPTIONAL): word-at-a-time spi_transfer support. - * Use this for GPIO or shift-register level hardware APIs. - * - * spi_bitbang_cs is in spi_device->controller_state, which is unavailable - * to glue code. These bitbang setup() and cleanup() routines are always - * used, though maybe they're called from controller-aware code. - * - * chipselect() and friends may use use spi_device->controller_data and - * controller registers as appropriate. - * - * - * NOTE: SPI controller pins can often be used as GPIO pins instead, - * which means you could use a bitbang driver either to get hardware - * working quickly, or testing for differences that aren't speed related. - */ - -struct spi_bitbang_cs { - unsigned nsecs; /* (clock cycle time)/2 */ - u32 (*txrx_word)(struct spi_device *spi, unsigned nsecs, - u32 word, u8 bits); - unsigned (*txrx_bufs)(struct spi_device *, - u32 (*txrx_word)( - struct spi_device *spi, - unsigned nsecs, - u32 word, u8 bits), - unsigned, struct spi_transfer *); -}; - -static unsigned bitbang_txrx_8( - struct spi_device *spi, - u32 (*txrx_word)(struct spi_device *spi, - unsigned nsecs, - u32 word, u8 bits), - unsigned ns, - struct spi_transfer *t -) { - unsigned bits = t->bits_per_word ? : spi->bits_per_word; - unsigned count = t->len; - const u8 *tx = t->tx_buf; - u8 *rx = t->rx_buf; - - while (likely(count > 0)) { - u8 word = 0; - - if (tx) - word = *tx++; - word = txrx_word(spi, ns, word, bits); - if (rx) - *rx++ = word; - count -= 1; - } - return t->len - count; -} - -static unsigned bitbang_txrx_16( - struct spi_device *spi, - u32 (*txrx_word)(struct spi_device *spi, - unsigned nsecs, - u32 word, u8 bits), - unsigned ns, - struct spi_transfer *t -) { - unsigned bits = t->bits_per_word ? : spi->bits_per_word; - unsigned count = t->len; - const u16 *tx = t->tx_buf; - u16 *rx = t->rx_buf; - - while (likely(count > 1)) { - u16 word = 0; - - if (tx) - word = *tx++; - word = txrx_word(spi, ns, word, bits); - if (rx) - *rx++ = word; - count -= 2; - } - return t->len - count; -} - -static unsigned bitbang_txrx_32( - struct spi_device *spi, - u32 (*txrx_word)(struct spi_device *spi, - unsigned nsecs, - u32 word, u8 bits), - unsigned ns, - struct spi_transfer *t -) { - unsigned bits = t->bits_per_word ? : spi->bits_per_word; - unsigned count = t->len; - const u32 *tx = t->tx_buf; - u32 *rx = t->rx_buf; - - while (likely(count > 3)) { - u32 word = 0; - - if (tx) - word = *tx++; - word = txrx_word(spi, ns, word, bits); - if (rx) - *rx++ = word; - count -= 4; - } - return t->len - count; -} - -int spi_bitbang_setup_transfer(struct spi_device *spi, struct spi_transfer *t) -{ - struct spi_bitbang_cs *cs = spi->controller_state; - u8 bits_per_word; - u32 hz; - - if (t) { - bits_per_word = t->bits_per_word; - hz = t->speed_hz; - } else { - bits_per_word = 0; - hz = 0; - } - - /* spi_transfer level calls that work per-word */ - if (!bits_per_word) - bits_per_word = spi->bits_per_word; - if (bits_per_word <= 8) - cs->txrx_bufs = bitbang_txrx_8; - else if (bits_per_word <= 16) - cs->txrx_bufs = bitbang_txrx_16; - else if (bits_per_word <= 32) - cs->txrx_bufs = bitbang_txrx_32; - else - return -EINVAL; - - /* nsecs = (clock period)/2 */ - if (!hz) - hz = spi->max_speed_hz; - if (hz) { - cs->nsecs = (1000000000/2) / hz; - if (cs->nsecs > (MAX_UDELAY_MS * 1000 * 1000)) - return -EINVAL; - } - - return 0; -} -EXPORT_SYMBOL_GPL(spi_bitbang_setup_transfer); - -/** - * spi_bitbang_setup - default setup for per-word I/O loops - */ -int spi_bitbang_setup(struct spi_device *spi) -{ - struct spi_bitbang_cs *cs = spi->controller_state; - struct spi_bitbang *bitbang; - int retval; - unsigned long flags; - - bitbang = spi_master_get_devdata(spi->master); - - if (!cs) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); - if (!cs) - return -ENOMEM; - spi->controller_state = cs; - } - - /* per-word shift register access, in hardware or bitbanging */ - cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)]; - if (!cs->txrx_word) - return -EINVAL; - - retval = bitbang->setup_transfer(spi, NULL); - if (retval < 0) - return retval; - - dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs); - - /* NOTE we _need_ to call chipselect() early, ideally with adapter - * setup, unless the hardware defaults cooperate to avoid confusion - * between normal (active low) and inverted chipselects. - */ - - /* deselect chip (low or high) */ - spin_lock_irqsave(&bitbang->lock, flags); - if (!bitbang->busy) { - bitbang->chipselect(spi, BITBANG_CS_INACTIVE); - ndelay(cs->nsecs); - } - spin_unlock_irqrestore(&bitbang->lock, flags); - - return 0; -} -EXPORT_SYMBOL_GPL(spi_bitbang_setup); - -/** - * spi_bitbang_cleanup - default cleanup for per-word I/O loops - */ -void spi_bitbang_cleanup(struct spi_device *spi) -{ - kfree(spi->controller_state); -} -EXPORT_SYMBOL_GPL(spi_bitbang_cleanup); - -static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) -{ - struct spi_bitbang_cs *cs = spi->controller_state; - unsigned nsecs = cs->nsecs; - - return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t); -} - -/*----------------------------------------------------------------------*/ - -/* - * SECOND PART ... simple transfer queue runner. - * - * This costs a task context per controller, running the queue by - * performing each transfer in sequence. Smarter hardware can queue - * several DMA transfers at once, and process several controller queues - * in parallel; this driver doesn't match such hardware very well. - * - * Drivers can provide word-at-a-time i/o primitives, or provide - * transfer-at-a-time ones to leverage dma or fifo hardware. - */ -static void bitbang_work(struct work_struct *work) -{ - struct spi_bitbang *bitbang = - container_of(work, struct spi_bitbang, work); - unsigned long flags; - - spin_lock_irqsave(&bitbang->lock, flags); - bitbang->busy = 1; - while (!list_empty(&bitbang->queue)) { - struct spi_message *m; - struct spi_device *spi; - unsigned nsecs; - struct spi_transfer *t = NULL; - unsigned tmp; - unsigned cs_change; - int status; - int do_setup = -1; - - m = container_of(bitbang->queue.next, struct spi_message, - queue); - list_del_init(&m->queue); - spin_unlock_irqrestore(&bitbang->lock, flags); - - /* FIXME this is made-up ... the correct value is known to - * word-at-a-time bitbang code, and presumably chipselect() - * should enforce these requirements too? - */ - nsecs = 100; - - spi = m->spi; - tmp = 0; - cs_change = 1; - status = 0; - - list_for_each_entry (t, &m->transfers, transfer_list) { - - /* override speed or wordsize? */ - if (t->speed_hz || t->bits_per_word) - do_setup = 1; - - /* init (-1) or override (1) transfer params */ - if (do_setup != 0) { - status = bitbang->setup_transfer(spi, t); - if (status < 0) - break; - if (do_setup == -1) - do_setup = 0; - } - - /* set up default clock polarity, and activate chip; - * this implicitly updates clock and spi modes as - * previously recorded for this device via setup(). - * (and also deselects any other chip that might be - * selected ...) - */ - if (cs_change) { - bitbang->chipselect(spi, BITBANG_CS_ACTIVE); - ndelay(nsecs); - } - cs_change = t->cs_change; - if (!t->tx_buf && !t->rx_buf && t->len) { - status = -EINVAL; - break; - } - - /* transfer data. the lower level code handles any - * new dma mappings it needs. our caller always gave - * us dma-safe buffers. - */ - if (t->len) { - /* REVISIT dma API still needs a designated - * DMA_ADDR_INVALID; ~0 might be better. - */ - if (!m->is_dma_mapped) - t->rx_dma = t->tx_dma = 0; - status = bitbang->txrx_bufs(spi, t); - } - if (status > 0) - m->actual_length += status; - if (status != t->len) { - /* always report some kind of error */ - if (status >= 0) - status = -EREMOTEIO; - break; - } - status = 0; - - /* protocol tweaks before next transfer */ - if (t->delay_usecs) - udelay(t->delay_usecs); - - if (!cs_change) - continue; - if (t->transfer_list.next == &m->transfers) - break; - - /* sometimes a short mid-message deselect of the chip - * may be needed to terminate a mode or command - */ - ndelay(nsecs); - bitbang->chipselect(spi, BITBANG_CS_INACTIVE); - ndelay(nsecs); - } - - m->status = status; - m->complete(m->context); - - /* normally deactivate chipselect ... unless no error and - * cs_change has hinted that the next message will probably - * be for this chip too. - */ - if (!(status == 0 && cs_change)) { - ndelay(nsecs); - bitbang->chipselect(spi, BITBANG_CS_INACTIVE); - ndelay(nsecs); - } - - spin_lock_irqsave(&bitbang->lock, flags); - } - bitbang->busy = 0; - spin_unlock_irqrestore(&bitbang->lock, flags); -} - -/** - * spi_bitbang_transfer - default submit to transfer queue - */ -int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m) -{ - struct spi_bitbang *bitbang; - unsigned long flags; - int status = 0; - - m->actual_length = 0; - m->status = -EINPROGRESS; - - bitbang = spi_master_get_devdata(spi->master); - - spin_lock_irqsave(&bitbang->lock, flags); - if (!spi->max_speed_hz) - status = -ENETDOWN; - else { - list_add_tail(&m->queue, &bitbang->queue); - queue_work(bitbang->workqueue, &bitbang->work); - } - spin_unlock_irqrestore(&bitbang->lock, flags); - - return status; -} -EXPORT_SYMBOL_GPL(spi_bitbang_transfer); - -/*----------------------------------------------------------------------*/ - -/** - * spi_bitbang_start - start up a polled/bitbanging SPI master driver - * @bitbang: driver handle - * - * Caller should have zero-initialized all parts of the structure, and then - * provided callbacks for chip selection and I/O loops. If the master has - * a transfer method, its final step should call spi_bitbang_transfer; or, - * that's the default if the transfer routine is not initialized. It should - * also set up the bus number and number of chipselects. - * - * For i/o loops, provide callbacks either per-word (for bitbanging, or for - * hardware that basically exposes a shift register) or per-spi_transfer - * (which takes better advantage of hardware like fifos or DMA engines). - * - * Drivers using per-word I/O loops should use (or call) spi_bitbang_setup, - * spi_bitbang_cleanup and spi_bitbang_setup_transfer to handle those spi - * master methods. Those methods are the defaults if the bitbang->txrx_bufs - * routine isn't initialized. - * - * This routine registers the spi_master, which will process requests in a - * dedicated task, keeping IRQs unblocked most of the time. To stop - * processing those requests, call spi_bitbang_stop(). - */ -int spi_bitbang_start(struct spi_bitbang *bitbang) -{ - int status; - - if (!bitbang->master || !bitbang->chipselect) - return -EINVAL; - - INIT_WORK(&bitbang->work, bitbang_work); - spin_lock_init(&bitbang->lock); - INIT_LIST_HEAD(&bitbang->queue); - - if (!bitbang->master->mode_bits) - bitbang->master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags; - - if (!bitbang->master->transfer) - bitbang->master->transfer = spi_bitbang_transfer; - if (!bitbang->txrx_bufs) { - bitbang->use_dma = 0; - bitbang->txrx_bufs = spi_bitbang_bufs; - if (!bitbang->master->setup) { - if (!bitbang->setup_transfer) - bitbang->setup_transfer = - spi_bitbang_setup_transfer; - bitbang->master->setup = spi_bitbang_setup; - bitbang->master->cleanup = spi_bitbang_cleanup; - } - } else if (!bitbang->master->setup) - return -EINVAL; - if (bitbang->master->transfer == spi_bitbang_transfer && - !bitbang->setup_transfer) - return -EINVAL; - - /* this task is the only thing to touch the SPI bits */ - bitbang->busy = 0; - bitbang->workqueue = create_singlethread_workqueue( - dev_name(bitbang->master->dev.parent)); - if (bitbang->workqueue == NULL) { - status = -EBUSY; - goto err1; - } - - /* driver may get busy before register() returns, especially - * if someone registered boardinfo for devices - */ - status = spi_register_master(bitbang->master); - if (status < 0) - goto err2; - - return status; - -err2: - destroy_workqueue(bitbang->workqueue); -err1: - return status; -} -EXPORT_SYMBOL_GPL(spi_bitbang_start); - -/** - * spi_bitbang_stop - stops the task providing spi communication - */ -int spi_bitbang_stop(struct spi_bitbang *bitbang) -{ - spi_unregister_master(bitbang->master); - - WARN_ON(!list_empty(&bitbang->queue)); - - destroy_workqueue(bitbang->workqueue); - - return 0; -} -EXPORT_SYMBOL_GPL(spi_bitbang_stop); - -MODULE_LICENSE("GPL"); - diff --git a/drivers/spi/spi_bitbang_txrx.h b/drivers/spi/spi_bitbang_txrx.h deleted file mode 100644 index c16bf853c3eb..000000000000 --- a/drivers/spi/spi_bitbang_txrx.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Mix this utility code with some glue code to get one of several types of - * simple SPI master driver. Two do polled word-at-a-time I/O: - * - * - GPIO/parport bitbangers. Provide chipselect() and txrx_word[](), - * expanding the per-word routines from the inline templates below. - * - * - Drivers for controllers resembling bare shift registers. Provide - * chipselect() and txrx_word[](), with custom setup()/cleanup() methods - * that use your controller's clock and chipselect registers. - * - * Some hardware works well with requests at spi_transfer scope: - * - * - Drivers leveraging smarter hardware, with fifos or DMA; or for half - * duplex (MicroWire) controllers. Provide chipselect() and txrx_bufs(), - * and custom setup()/cleanup() methods. - */ - -/* - * The code that knows what GPIO pins do what should have declared four - * functions, ideally as inlines, before including this header: - * - * void setsck(struct spi_device *, int is_on); - * void setmosi(struct spi_device *, int is_on); - * int getmiso(struct spi_device *); - * void spidelay(unsigned); - * - * setsck()'s is_on parameter is a zero/nonzero boolean. - * - * setmosi()'s is_on parameter is a zero/nonzero boolean. - * - * getmiso() is required to return 0 or 1 only. Any other value is invalid - * and will result in improper operation. - * - * A non-inlined routine would call bitbang_txrx_*() routines. The - * main loop could easily compile down to a handful of instructions, - * especially if the delay is a NOP (to run at peak speed). - * - * Since this is software, the timings may not be exactly what your board's - * chips need ... there may be several reasons you'd need to tweak timings - * in these routines, not just make to make it faster or slower to match a - * particular CPU clock rate. - */ - -static inline u32 -bitbang_txrx_be_cpha0(struct spi_device *spi, - unsigned nsecs, unsigned cpol, unsigned flags, - u32 word, u8 bits) -{ - /* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */ - - /* clock starts at inactive polarity */ - for (word <<= (32 - bits); likely(bits); bits--) { - - /* setup MSB (to slave) on trailing edge */ - if ((flags & SPI_MASTER_NO_TX) == 0) - setmosi(spi, word & (1 << 31)); - spidelay(nsecs); /* T(setup) */ - - setsck(spi, !cpol); - spidelay(nsecs); - - /* sample MSB (from slave) on leading edge */ - word <<= 1; - if ((flags & SPI_MASTER_NO_RX) == 0) - word |= getmiso(spi); - setsck(spi, cpol); - } - return word; -} - -static inline u32 -bitbang_txrx_be_cpha1(struct spi_device *spi, - unsigned nsecs, unsigned cpol, unsigned flags, - u32 word, u8 bits) -{ - /* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */ - - /* clock starts at inactive polarity */ - for (word <<= (32 - bits); likely(bits); bits--) { - - /* setup MSB (to slave) on leading edge */ - setsck(spi, !cpol); - if ((flags & SPI_MASTER_NO_TX) == 0) - setmosi(spi, word & (1 << 31)); - spidelay(nsecs); /* T(setup) */ - - setsck(spi, cpol); - spidelay(nsecs); - - /* sample MSB (from slave) on trailing edge */ - word <<= 1; - if ((flags & SPI_MASTER_NO_RX) == 0) - word |= getmiso(spi); - } - return word; -} diff --git a/drivers/spi/spi_butterfly.c b/drivers/spi/spi_butterfly.c deleted file mode 100644 index 0d4ceba3b590..000000000000 --- a/drivers/spi/spi_butterfly.c +++ /dev/null @@ -1,356 +0,0 @@ -/* - * spi_butterfly.c - parport-to-butterfly adapter - * - * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - - -/* - * This uses SPI to talk with an "AVR Butterfly", which is a $US20 card - * with a battery powered AVR microcontroller and lots of goodies. You - * can use GCC to develop firmware for this. - * - * See Documentation/spi/butterfly for information about how to build - * and use this custom parallel port cable. - */ - - -/* DATA output bits (pins 2..9 == D0..D7) */ -#define butterfly_nreset (1 << 1) /* pin 3 */ - -#define spi_sck_bit (1 << 0) /* pin 2 */ -#define spi_mosi_bit (1 << 7) /* pin 9 */ - -#define vcc_bits ((1 << 6) | (1 << 5)) /* pins 7, 8 */ - -/* STATUS input bits */ -#define spi_miso_bit PARPORT_STATUS_BUSY /* pin 11 */ - -/* CONTROL output bits */ -#define spi_cs_bit PARPORT_CONTROL_SELECT /* pin 17 */ - - - -static inline struct butterfly *spidev_to_pp(struct spi_device *spi) -{ - return spi->controller_data; -} - - -struct butterfly { - /* REVISIT ... for now, this must be first */ - struct spi_bitbang bitbang; - - struct parport *port; - struct pardevice *pd; - - u8 lastbyte; - - struct spi_device *dataflash; - struct spi_device *butterfly; - struct spi_board_info info[2]; - -}; - -/*----------------------------------------------------------------------*/ - -static inline void -setsck(struct spi_device *spi, int is_on) -{ - struct butterfly *pp = spidev_to_pp(spi); - u8 bit, byte = pp->lastbyte; - - bit = spi_sck_bit; - - if (is_on) - byte |= bit; - else - byte &= ~bit; - parport_write_data(pp->port, byte); - pp->lastbyte = byte; -} - -static inline void -setmosi(struct spi_device *spi, int is_on) -{ - struct butterfly *pp = spidev_to_pp(spi); - u8 bit, byte = pp->lastbyte; - - bit = spi_mosi_bit; - - if (is_on) - byte |= bit; - else - byte &= ~bit; - parport_write_data(pp->port, byte); - pp->lastbyte = byte; -} - -static inline int getmiso(struct spi_device *spi) -{ - struct butterfly *pp = spidev_to_pp(spi); - int value; - u8 bit; - - bit = spi_miso_bit; - - /* only STATUS_BUSY is NOT negated */ - value = !(parport_read_status(pp->port) & bit); - return (bit == PARPORT_STATUS_BUSY) ? value : !value; -} - -static void butterfly_chipselect(struct spi_device *spi, int value) -{ - struct butterfly *pp = spidev_to_pp(spi); - - /* set default clock polarity */ - if (value != BITBANG_CS_INACTIVE) - setsck(spi, spi->mode & SPI_CPOL); - - /* here, value == "activate or not"; - * most PARPORT_CONTROL_* bits are negated, so we must - * morph it to value == "bit value to write in control register" - */ - if (spi_cs_bit == PARPORT_CONTROL_INIT) - value = !value; - - parport_frob_control(pp->port, spi_cs_bit, value ? spi_cs_bit : 0); -} - - -/* we only needed to implement one mode here, and choose SPI_MODE_0 */ - -#define spidelay(X) do{}while(0) -//#define spidelay ndelay - -#include "spi_bitbang_txrx.h" - -static u32 -butterfly_txrx_word_mode0(struct spi_device *spi, - unsigned nsecs, - u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); -} - -/*----------------------------------------------------------------------*/ - -/* override default partitioning with cmdlinepart */ -static struct mtd_partition partitions[] = { { - /* JFFS2 wants partitions of 4*N blocks for this device, - * so sectors 0 and 1 can't be partitions by themselves. - */ - - /* sector 0 = 8 pages * 264 bytes/page (1 block) - * sector 1 = 248 pages * 264 bytes/page - */ - .name = "bookkeeping", // 66 KB - .offset = 0, - .size = (8 + 248) * 264, -// .mask_flags = MTD_WRITEABLE, -}, { - /* sector 2 = 256 pages * 264 bytes/page - * sectors 3-5 = 512 pages * 264 bytes/page - */ - .name = "filesystem", // 462 KB - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, -} }; - -static struct flash_platform_data flash = { - .name = "butterflash", - .parts = partitions, - .nr_parts = ARRAY_SIZE(partitions), -}; - - -/* REVISIT remove this ugly global and its "only one" limitation */ -static struct butterfly *butterfly; - -static void butterfly_attach(struct parport *p) -{ - struct pardevice *pd; - int status; - struct butterfly *pp; - struct spi_master *master; - struct device *dev = p->physport->dev; - - if (butterfly || !dev) - return; - - /* REVISIT: this just _assumes_ a butterfly is there ... no probe, - * and no way to be selective about what it binds to. - */ - - master = spi_alloc_master(dev, sizeof *pp); - if (!master) { - status = -ENOMEM; - goto done; - } - pp = spi_master_get_devdata(master); - - /* - * SPI and bitbang hookup - * - * use default setup(), cleanup(), and transfer() methods; and - * only bother implementing mode 0. Start it later. - */ - master->bus_num = 42; - master->num_chipselect = 2; - - pp->bitbang.master = spi_master_get(master); - pp->bitbang.chipselect = butterfly_chipselect; - pp->bitbang.txrx_word[SPI_MODE_0] = butterfly_txrx_word_mode0; - - /* - * parport hookup - */ - pp->port = p; - pd = parport_register_device(p, "spi_butterfly", - NULL, NULL, NULL, - 0 /* FLAGS */, pp); - if (!pd) { - status = -ENOMEM; - goto clean0; - } - pp->pd = pd; - - status = parport_claim(pd); - if (status < 0) - goto clean1; - - /* - * Butterfly reset, powerup, run firmware - */ - pr_debug("%s: powerup/reset Butterfly\n", p->name); - - /* nCS for dataflash (this bit is inverted on output) */ - parport_frob_control(pp->port, spi_cs_bit, 0); - - /* stabilize power with chip in reset (nRESET), and - * spi_sck_bit clear (CPOL=0) - */ - pp->lastbyte |= vcc_bits; - parport_write_data(pp->port, pp->lastbyte); - msleep(5); - - /* take it out of reset; assume long reset delay */ - pp->lastbyte |= butterfly_nreset; - parport_write_data(pp->port, pp->lastbyte); - msleep(100); - - - /* - * Start SPI ... for now, hide that we're two physical busses. - */ - status = spi_bitbang_start(&pp->bitbang); - if (status < 0) - goto clean2; - - /* Bus 1 lets us talk to at45db041b (firmware disables AVR SPI), AVR - * (firmware resets at45, acts as spi slave) or neither (we ignore - * both, AVR uses AT45). Here we expect firmware for the first option. - */ - - pp->info[0].max_speed_hz = 15 * 1000 * 1000; - strcpy(pp->info[0].modalias, "mtd_dataflash"); - pp->info[0].platform_data = &flash; - pp->info[0].chip_select = 1; - pp->info[0].controller_data = pp; - pp->dataflash = spi_new_device(pp->bitbang.master, &pp->info[0]); - if (pp->dataflash) - pr_debug("%s: dataflash at %s\n", p->name, - dev_name(&pp->dataflash->dev)); - - // dev_info(_what?_, ...) - pr_info("%s: AVR Butterfly\n", p->name); - butterfly = pp; - return; - -clean2: - /* turn off VCC */ - parport_write_data(pp->port, 0); - - parport_release(pp->pd); -clean1: - parport_unregister_device(pd); -clean0: - (void) spi_master_put(pp->bitbang.master); -done: - pr_debug("%s: butterfly probe, fail %d\n", p->name, status); -} - -static void butterfly_detach(struct parport *p) -{ - struct butterfly *pp; - int status; - - /* FIXME this global is ugly ... but, how to quickly get from - * the parport to the "struct butterfly" associated with it? - * "old school" driver-internal device lists? - */ - if (!butterfly || butterfly->port != p) - return; - pp = butterfly; - butterfly = NULL; - - /* stop() unregisters child devices too */ - status = spi_bitbang_stop(&pp->bitbang); - - /* turn off VCC */ - parport_write_data(pp->port, 0); - msleep(10); - - parport_release(pp->pd); - parport_unregister_device(pp->pd); - - (void) spi_master_put(pp->bitbang.master); -} - -static struct parport_driver butterfly_driver = { - .name = "spi_butterfly", - .attach = butterfly_attach, - .detach = butterfly_detach, -}; - - -static int __init butterfly_init(void) -{ - return parport_register_driver(&butterfly_driver); -} -device_initcall(butterfly_init); - -static void __exit butterfly_exit(void) -{ - parport_unregister_driver(&butterfly_driver); -} -module_exit(butterfly_exit); - -MODULE_DESCRIPTION("Parport Adapter driver for AVR Butterfly"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c deleted file mode 100644 index 496f895a0024..000000000000 --- a/drivers/spi/spi_fsl_espi.c +++ /dev/null @@ -1,762 +0,0 @@ -/* - * Freescale eSPI controller driver. - * - * Copyright 2010 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "spi_fsl_lib.h" - -/* eSPI Controller registers */ -struct fsl_espi_reg { - __be32 mode; /* 0x000 - eSPI mode register */ - __be32 event; /* 0x004 - eSPI event register */ - __be32 mask; /* 0x008 - eSPI mask register */ - __be32 command; /* 0x00c - eSPI command register */ - __be32 transmit; /* 0x010 - eSPI transmit FIFO access register*/ - __be32 receive; /* 0x014 - eSPI receive FIFO access register*/ - u8 res[8]; /* 0x018 - 0x01c reserved */ - __be32 csmode[4]; /* 0x020 - 0x02c eSPI cs mode register */ -}; - -struct fsl_espi_transfer { - const void *tx_buf; - void *rx_buf; - unsigned len; - unsigned n_tx; - unsigned n_rx; - unsigned actual_length; - int status; -}; - -/* eSPI Controller mode register definitions */ -#define SPMODE_ENABLE (1 << 31) -#define SPMODE_LOOP (1 << 30) -#define SPMODE_TXTHR(x) ((x) << 8) -#define SPMODE_RXTHR(x) ((x) << 0) - -/* eSPI Controller CS mode register definitions */ -#define CSMODE_CI_INACTIVEHIGH (1 << 31) -#define CSMODE_CP_BEGIN_EDGECLK (1 << 30) -#define CSMODE_REV (1 << 29) -#define CSMODE_DIV16 (1 << 28) -#define CSMODE_PM(x) ((x) << 24) -#define CSMODE_POL_1 (1 << 20) -#define CSMODE_LEN(x) ((x) << 16) -#define CSMODE_BEF(x) ((x) << 12) -#define CSMODE_AFT(x) ((x) << 8) -#define CSMODE_CG(x) ((x) << 3) - -/* Default mode/csmode for eSPI controller */ -#define SPMODE_INIT_VAL (SPMODE_TXTHR(4) | SPMODE_RXTHR(3)) -#define CSMODE_INIT_VAL (CSMODE_POL_1 | CSMODE_BEF(0) \ - | CSMODE_AFT(0) | CSMODE_CG(1)) - -/* SPIE register values */ -#define SPIE_NE 0x00000200 /* Not empty */ -#define SPIE_NF 0x00000100 /* Not full */ - -/* SPIM register values */ -#define SPIM_NE 0x00000200 /* Not empty */ -#define SPIM_NF 0x00000100 /* Not full */ -#define SPIE_RXCNT(reg) ((reg >> 24) & 0x3F) -#define SPIE_TXCNT(reg) ((reg >> 16) & 0x3F) - -/* SPCOM register values */ -#define SPCOM_CS(x) ((x) << 30) -#define SPCOM_TRANLEN(x) ((x) << 0) -#define SPCOM_TRANLEN_MAX 0xFFFF /* Max transaction length */ - -static void fsl_espi_change_mode(struct spi_device *spi) -{ - struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); - struct spi_mpc8xxx_cs *cs = spi->controller_state; - struct fsl_espi_reg *reg_base = mspi->reg_base; - __be32 __iomem *mode = ®_base->csmode[spi->chip_select]; - __be32 __iomem *espi_mode = ®_base->mode; - u32 tmp; - unsigned long flags; - - /* Turn off IRQs locally to minimize time that SPI is disabled. */ - local_irq_save(flags); - - /* Turn off SPI unit prior changing mode */ - tmp = mpc8xxx_spi_read_reg(espi_mode); - mpc8xxx_spi_write_reg(espi_mode, tmp & ~SPMODE_ENABLE); - mpc8xxx_spi_write_reg(mode, cs->hw_mode); - mpc8xxx_spi_write_reg(espi_mode, tmp); - - local_irq_restore(flags); -} - -static u32 fsl_espi_tx_buf_lsb(struct mpc8xxx_spi *mpc8xxx_spi) -{ - u32 data; - u16 data_h; - u16 data_l; - const u32 *tx = mpc8xxx_spi->tx; - - if (!tx) - return 0; - - data = *tx++ << mpc8xxx_spi->tx_shift; - data_l = data & 0xffff; - data_h = (data >> 16) & 0xffff; - swab16s(&data_l); - swab16s(&data_h); - data = data_h | data_l; - - mpc8xxx_spi->tx = tx; - return data; -} - -static int fsl_espi_setup_transfer(struct spi_device *spi, - struct spi_transfer *t) -{ - struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - int bits_per_word = 0; - u8 pm; - u32 hz = 0; - struct spi_mpc8xxx_cs *cs = spi->controller_state; - - if (t) { - bits_per_word = t->bits_per_word; - hz = t->speed_hz; - } - - /* spi_transfer level calls that work per-word */ - if (!bits_per_word) - bits_per_word = spi->bits_per_word; - - /* Make sure its a bit width we support [4..16] */ - if ((bits_per_word < 4) || (bits_per_word > 16)) - return -EINVAL; - - if (!hz) - hz = spi->max_speed_hz; - - cs->rx_shift = 0; - cs->tx_shift = 0; - cs->get_rx = mpc8xxx_spi_rx_buf_u32; - cs->get_tx = mpc8xxx_spi_tx_buf_u32; - if (bits_per_word <= 8) { - cs->rx_shift = 8 - bits_per_word; - } else if (bits_per_word <= 16) { - cs->rx_shift = 16 - bits_per_word; - if (spi->mode & SPI_LSB_FIRST) - cs->get_tx = fsl_espi_tx_buf_lsb; - } else { - return -EINVAL; - } - - mpc8xxx_spi->rx_shift = cs->rx_shift; - mpc8xxx_spi->tx_shift = cs->tx_shift; - mpc8xxx_spi->get_rx = cs->get_rx; - mpc8xxx_spi->get_tx = cs->get_tx; - - bits_per_word = bits_per_word - 1; - - /* mask out bits we are going to set */ - cs->hw_mode &= ~(CSMODE_LEN(0xF) | CSMODE_DIV16 | CSMODE_PM(0xF)); - - cs->hw_mode |= CSMODE_LEN(bits_per_word); - - if ((mpc8xxx_spi->spibrg / hz) > 64) { - cs->hw_mode |= CSMODE_DIV16; - pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1; - - WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " - "Will use %d Hz instead.\n", dev_name(&spi->dev), - hz, mpc8xxx_spi->spibrg / 1024); - if (pm > 16) - pm = 16; - } else { - pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; - } - if (pm) - pm--; - - cs->hw_mode |= CSMODE_PM(pm); - - fsl_espi_change_mode(spi); - return 0; -} - -static int fsl_espi_cpu_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, - unsigned int len) -{ - u32 word; - struct fsl_espi_reg *reg_base = mspi->reg_base; - - mspi->count = len; - - /* enable rx ints */ - mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE); - - /* transmit word */ - word = mspi->get_tx(mspi); - mpc8xxx_spi_write_reg(®_base->transmit, word); - - return 0; -} - -static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t) -{ - struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - struct fsl_espi_reg *reg_base = mpc8xxx_spi->reg_base; - unsigned int len = t->len; - u8 bits_per_word; - int ret; - - bits_per_word = spi->bits_per_word; - if (t->bits_per_word) - bits_per_word = t->bits_per_word; - - mpc8xxx_spi->len = t->len; - len = roundup(len, 4) / 4; - - mpc8xxx_spi->tx = t->tx_buf; - mpc8xxx_spi->rx = t->rx_buf; - - INIT_COMPLETION(mpc8xxx_spi->done); - - /* Set SPCOM[CS] and SPCOM[TRANLEN] field */ - if ((t->len - 1) > SPCOM_TRANLEN_MAX) { - dev_err(mpc8xxx_spi->dev, "Transaction length (%d)" - " beyond the SPCOM[TRANLEN] field\n", t->len); - return -EINVAL; - } - mpc8xxx_spi_write_reg(®_base->command, - (SPCOM_CS(spi->chip_select) | SPCOM_TRANLEN(t->len - 1))); - - ret = fsl_espi_cpu_bufs(mpc8xxx_spi, t, len); - if (ret) - return ret; - - wait_for_completion(&mpc8xxx_spi->done); - - /* disable rx ints */ - mpc8xxx_spi_write_reg(®_base->mask, 0); - - return mpc8xxx_spi->count; -} - -static inline void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd) -{ - if (cmd) { - cmd[1] = (u8)(addr >> 16); - cmd[2] = (u8)(addr >> 8); - cmd[3] = (u8)(addr >> 0); - } -} - -static inline unsigned int fsl_espi_cmd2addr(u8 *cmd) -{ - if (cmd) - return cmd[1] << 16 | cmd[2] << 8 | cmd[3] << 0; - - return 0; -} - -static void fsl_espi_do_trans(struct spi_message *m, - struct fsl_espi_transfer *tr) -{ - struct spi_device *spi = m->spi; - struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); - struct fsl_espi_transfer *espi_trans = tr; - struct spi_message message; - struct spi_transfer *t, *first, trans; - int status = 0; - - spi_message_init(&message); - memset(&trans, 0, sizeof(trans)); - - first = list_first_entry(&m->transfers, struct spi_transfer, - transfer_list); - list_for_each_entry(t, &m->transfers, transfer_list) { - if ((first->bits_per_word != t->bits_per_word) || - (first->speed_hz != t->speed_hz)) { - espi_trans->status = -EINVAL; - dev_err(mspi->dev, "bits_per_word/speed_hz should be" - " same for the same SPI transfer\n"); - return; - } - - trans.speed_hz = t->speed_hz; - trans.bits_per_word = t->bits_per_word; - trans.delay_usecs = max(first->delay_usecs, t->delay_usecs); - } - - trans.len = espi_trans->len; - trans.tx_buf = espi_trans->tx_buf; - trans.rx_buf = espi_trans->rx_buf; - spi_message_add_tail(&trans, &message); - - list_for_each_entry(t, &message.transfers, transfer_list) { - if (t->bits_per_word || t->speed_hz) { - status = -EINVAL; - - status = fsl_espi_setup_transfer(spi, t); - if (status < 0) - break; - } - - if (t->len) - status = fsl_espi_bufs(spi, t); - - if (status) { - status = -EMSGSIZE; - break; - } - - if (t->delay_usecs) - udelay(t->delay_usecs); - } - - espi_trans->status = status; - fsl_espi_setup_transfer(spi, NULL); -} - -static void fsl_espi_cmd_trans(struct spi_message *m, - struct fsl_espi_transfer *trans, u8 *rx_buff) -{ - struct spi_transfer *t; - u8 *local_buf; - int i = 0; - struct fsl_espi_transfer *espi_trans = trans; - - local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); - if (!local_buf) { - espi_trans->status = -ENOMEM; - return; - } - - list_for_each_entry(t, &m->transfers, transfer_list) { - if (t->tx_buf) { - memcpy(local_buf + i, t->tx_buf, t->len); - i += t->len; - } - } - - espi_trans->tx_buf = local_buf; - espi_trans->rx_buf = local_buf + espi_trans->n_tx; - fsl_espi_do_trans(m, espi_trans); - - espi_trans->actual_length = espi_trans->len; - kfree(local_buf); -} - -static void fsl_espi_rw_trans(struct spi_message *m, - struct fsl_espi_transfer *trans, u8 *rx_buff) -{ - struct fsl_espi_transfer *espi_trans = trans; - unsigned int n_tx = espi_trans->n_tx; - unsigned int n_rx = espi_trans->n_rx; - struct spi_transfer *t; - u8 *local_buf; - u8 *rx_buf = rx_buff; - unsigned int trans_len; - unsigned int addr; - int i, pos, loop; - - local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); - if (!local_buf) { - espi_trans->status = -ENOMEM; - return; - } - - for (pos = 0, loop = 0; pos < n_rx; pos += trans_len, loop++) { - trans_len = n_rx - pos; - if (trans_len > SPCOM_TRANLEN_MAX - n_tx) - trans_len = SPCOM_TRANLEN_MAX - n_tx; - - i = 0; - list_for_each_entry(t, &m->transfers, transfer_list) { - if (t->tx_buf) { - memcpy(local_buf + i, t->tx_buf, t->len); - i += t->len; - } - } - - if (pos > 0) { - addr = fsl_espi_cmd2addr(local_buf); - addr += pos; - fsl_espi_addr2cmd(addr, local_buf); - } - - espi_trans->n_tx = n_tx; - espi_trans->n_rx = trans_len; - espi_trans->len = trans_len + n_tx; - espi_trans->tx_buf = local_buf; - espi_trans->rx_buf = local_buf + n_tx; - fsl_espi_do_trans(m, espi_trans); - - memcpy(rx_buf + pos, espi_trans->rx_buf + n_tx, trans_len); - - if (loop > 0) - espi_trans->actual_length += espi_trans->len - n_tx; - else - espi_trans->actual_length += espi_trans->len; - } - - kfree(local_buf); -} - -static void fsl_espi_do_one_msg(struct spi_message *m) -{ - struct spi_transfer *t; - u8 *rx_buf = NULL; - unsigned int n_tx = 0; - unsigned int n_rx = 0; - struct fsl_espi_transfer espi_trans; - - list_for_each_entry(t, &m->transfers, transfer_list) { - if (t->tx_buf) - n_tx += t->len; - if (t->rx_buf) { - n_rx += t->len; - rx_buf = t->rx_buf; - } - } - - espi_trans.n_tx = n_tx; - espi_trans.n_rx = n_rx; - espi_trans.len = n_tx + n_rx; - espi_trans.actual_length = 0; - espi_trans.status = 0; - - if (!rx_buf) - fsl_espi_cmd_trans(m, &espi_trans, NULL); - else - fsl_espi_rw_trans(m, &espi_trans, rx_buf); - - m->actual_length = espi_trans.actual_length; - m->status = espi_trans.status; - m->complete(m->context); -} - -static int fsl_espi_setup(struct spi_device *spi) -{ - struct mpc8xxx_spi *mpc8xxx_spi; - struct fsl_espi_reg *reg_base; - int retval; - u32 hw_mode; - u32 loop_mode; - struct spi_mpc8xxx_cs *cs = spi->controller_state; - - if (!spi->max_speed_hz) - return -EINVAL; - - if (!cs) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); - if (!cs) - return -ENOMEM; - spi->controller_state = cs; - } - - mpc8xxx_spi = spi_master_get_devdata(spi->master); - reg_base = mpc8xxx_spi->reg_base; - - hw_mode = cs->hw_mode; /* Save original settings */ - cs->hw_mode = mpc8xxx_spi_read_reg( - ®_base->csmode[spi->chip_select]); - /* mask out bits we are going to set */ - cs->hw_mode &= ~(CSMODE_CP_BEGIN_EDGECLK | CSMODE_CI_INACTIVEHIGH - | CSMODE_REV); - - if (spi->mode & SPI_CPHA) - cs->hw_mode |= CSMODE_CP_BEGIN_EDGECLK; - if (spi->mode & SPI_CPOL) - cs->hw_mode |= CSMODE_CI_INACTIVEHIGH; - if (!(spi->mode & SPI_LSB_FIRST)) - cs->hw_mode |= CSMODE_REV; - - /* Handle the loop mode */ - loop_mode = mpc8xxx_spi_read_reg(®_base->mode); - loop_mode &= ~SPMODE_LOOP; - if (spi->mode & SPI_LOOP) - loop_mode |= SPMODE_LOOP; - mpc8xxx_spi_write_reg(®_base->mode, loop_mode); - - retval = fsl_espi_setup_transfer(spi, NULL); - if (retval < 0) { - cs->hw_mode = hw_mode; /* Restore settings */ - return retval; - } - return 0; -} - -void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) -{ - struct fsl_espi_reg *reg_base = mspi->reg_base; - - /* We need handle RX first */ - if (events & SPIE_NE) { - u32 rx_data, tmp; - u8 rx_data_8; - - /* Spin until RX is done */ - while (SPIE_RXCNT(events) < min(4, mspi->len)) { - cpu_relax(); - events = mpc8xxx_spi_read_reg(®_base->event); - } - - if (mspi->len >= 4) { - rx_data = mpc8xxx_spi_read_reg(®_base->receive); - } else { - tmp = mspi->len; - rx_data = 0; - while (tmp--) { - rx_data_8 = in_8((u8 *)®_base->receive); - rx_data |= (rx_data_8 << (tmp * 8)); - } - - rx_data <<= (4 - mspi->len) * 8; - } - - mspi->len -= 4; - - if (mspi->rx) - mspi->get_rx(rx_data, mspi); - } - - if (!(events & SPIE_NF)) { - int ret; - - /* spin until TX is done */ - ret = spin_event_timeout(((events = mpc8xxx_spi_read_reg( - ®_base->event)) & SPIE_NF) == 0, 1000, 0); - if (!ret) { - dev_err(mspi->dev, "tired waiting for SPIE_NF\n"); - return; - } - } - - /* Clear the events */ - mpc8xxx_spi_write_reg(®_base->event, events); - - mspi->count -= 1; - if (mspi->count) { - u32 word = mspi->get_tx(mspi); - - mpc8xxx_spi_write_reg(®_base->transmit, word); - } else { - complete(&mspi->done); - } -} - -static irqreturn_t fsl_espi_irq(s32 irq, void *context_data) -{ - struct mpc8xxx_spi *mspi = context_data; - struct fsl_espi_reg *reg_base = mspi->reg_base; - irqreturn_t ret = IRQ_NONE; - u32 events; - - /* Get interrupt events(tx/rx) */ - events = mpc8xxx_spi_read_reg(®_base->event); - if (events) - ret = IRQ_HANDLED; - - dev_vdbg(mspi->dev, "%s: events %x\n", __func__, events); - - fsl_espi_cpu_irq(mspi, events); - - return ret; -} - -static void fsl_espi_remove(struct mpc8xxx_spi *mspi) -{ - iounmap(mspi->reg_base); -} - -static struct spi_master * __devinit fsl_espi_probe(struct device *dev, - struct resource *mem, unsigned int irq) -{ - struct fsl_spi_platform_data *pdata = dev->platform_data; - struct spi_master *master; - struct mpc8xxx_spi *mpc8xxx_spi; - struct fsl_espi_reg *reg_base; - u32 regval; - int i, ret = 0; - - master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi)); - if (!master) { - ret = -ENOMEM; - goto err; - } - - dev_set_drvdata(dev, master); - - ret = mpc8xxx_spi_probe(dev, mem, irq); - if (ret) - goto err_probe; - - master->setup = fsl_espi_setup; - - mpc8xxx_spi = spi_master_get_devdata(master); - mpc8xxx_spi->spi_do_one_msg = fsl_espi_do_one_msg; - mpc8xxx_spi->spi_remove = fsl_espi_remove; - - mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem)); - if (!mpc8xxx_spi->reg_base) { - ret = -ENOMEM; - goto err_probe; - } - - reg_base = mpc8xxx_spi->reg_base; - - /* Register for SPI Interrupt */ - ret = request_irq(mpc8xxx_spi->irq, fsl_espi_irq, - 0, "fsl_espi", mpc8xxx_spi); - if (ret) - goto free_irq; - - if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { - mpc8xxx_spi->rx_shift = 16; - mpc8xxx_spi->tx_shift = 24; - } - - /* SPI controller initializations */ - mpc8xxx_spi_write_reg(®_base->mode, 0); - mpc8xxx_spi_write_reg(®_base->mask, 0); - mpc8xxx_spi_write_reg(®_base->command, 0); - mpc8xxx_spi_write_reg(®_base->event, 0xffffffff); - - /* Init eSPI CS mode register */ - for (i = 0; i < pdata->max_chipselect; i++) - mpc8xxx_spi_write_reg(®_base->csmode[i], CSMODE_INIT_VAL); - - /* Enable SPI interface */ - regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; - - mpc8xxx_spi_write_reg(®_base->mode, regval); - - ret = spi_register_master(master); - if (ret < 0) - goto unreg_master; - - dev_info(dev, "at 0x%p (irq = %d)\n", reg_base, mpc8xxx_spi->irq); - - return master; - -unreg_master: - free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); -free_irq: - iounmap(mpc8xxx_spi->reg_base); -err_probe: - spi_master_put(master); -err: - return ERR_PTR(ret); -} - -static int of_fsl_espi_get_chipselects(struct device *dev) -{ - struct device_node *np = dev->of_node; - struct fsl_spi_platform_data *pdata = dev->platform_data; - const u32 *prop; - int len; - - prop = of_get_property(np, "fsl,espi-num-chipselects", &len); - if (!prop || len < sizeof(*prop)) { - dev_err(dev, "No 'fsl,espi-num-chipselects' property\n"); - return -EINVAL; - } - - pdata->max_chipselect = *prop; - pdata->cs_control = NULL; - - return 0; -} - -static int __devinit of_fsl_espi_probe(struct platform_device *ofdev) -{ - struct device *dev = &ofdev->dev; - struct device_node *np = ofdev->dev.of_node; - struct spi_master *master; - struct resource mem; - struct resource irq; - int ret = -ENOMEM; - - ret = of_mpc8xxx_spi_probe(ofdev); - if (ret) - return ret; - - ret = of_fsl_espi_get_chipselects(dev); - if (ret) - goto err; - - ret = of_address_to_resource(np, 0, &mem); - if (ret) - goto err; - - ret = of_irq_to_resource(np, 0, &irq); - if (!ret) { - ret = -EINVAL; - goto err; - } - - master = fsl_espi_probe(dev, &mem, irq.start); - if (IS_ERR(master)) { - ret = PTR_ERR(master); - goto err; - } - - return 0; - -err: - return ret; -} - -static int __devexit of_fsl_espi_remove(struct platform_device *dev) -{ - return mpc8xxx_spi_remove(&dev->dev); -} - -static const struct of_device_id of_fsl_espi_match[] = { - { .compatible = "fsl,mpc8536-espi" }, - {} -}; -MODULE_DEVICE_TABLE(of, of_fsl_espi_match); - -static struct platform_driver fsl_espi_driver = { - .driver = { - .name = "fsl_espi", - .owner = THIS_MODULE, - .of_match_table = of_fsl_espi_match, - }, - .probe = of_fsl_espi_probe, - .remove = __devexit_p(of_fsl_espi_remove), -}; - -static int __init fsl_espi_init(void) -{ - return platform_driver_register(&fsl_espi_driver); -} -module_init(fsl_espi_init); - -static void __exit fsl_espi_exit(void) -{ - platform_driver_unregister(&fsl_espi_driver); -} -module_exit(fsl_espi_exit); - -MODULE_AUTHOR("Mingkai Hu"); -MODULE_DESCRIPTION("Enhanced Freescale SPI Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_fsl_lib.c b/drivers/spi/spi_fsl_lib.c deleted file mode 100644 index ff59f42ae990..000000000000 --- a/drivers/spi/spi_fsl_lib.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Freescale SPI/eSPI controller driver library. - * - * Maintainer: Kumar Gala - * - * Copyright (C) 2006 Polycom, Inc. - * - * CPM SPI and QE buffer descriptors mode support: - * Copyright (c) 2009 MontaVista Software, Inc. - * Author: Anton Vorontsov - * - * Copyright 2010 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include "spi_fsl_lib.h" - -#define MPC8XXX_SPI_RX_BUF(type) \ -void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ -{ \ - type *rx = mpc8xxx_spi->rx; \ - *rx++ = (type)(data >> mpc8xxx_spi->rx_shift); \ - mpc8xxx_spi->rx = rx; \ -} - -#define MPC8XXX_SPI_TX_BUF(type) \ -u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi) \ -{ \ - u32 data; \ - const type *tx = mpc8xxx_spi->tx; \ - if (!tx) \ - return 0; \ - data = *tx++ << mpc8xxx_spi->tx_shift; \ - mpc8xxx_spi->tx = tx; \ - return data; \ -} - -MPC8XXX_SPI_RX_BUF(u8) -MPC8XXX_SPI_RX_BUF(u16) -MPC8XXX_SPI_RX_BUF(u32) -MPC8XXX_SPI_TX_BUF(u8) -MPC8XXX_SPI_TX_BUF(u16) -MPC8XXX_SPI_TX_BUF(u32) - -struct mpc8xxx_spi_probe_info *to_of_pinfo(struct fsl_spi_platform_data *pdata) -{ - return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); -} - -void mpc8xxx_spi_work(struct work_struct *work) -{ - struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi, - work); - - spin_lock_irq(&mpc8xxx_spi->lock); - while (!list_empty(&mpc8xxx_spi->queue)) { - struct spi_message *m = container_of(mpc8xxx_spi->queue.next, - struct spi_message, queue); - - list_del_init(&m->queue); - spin_unlock_irq(&mpc8xxx_spi->lock); - - if (mpc8xxx_spi->spi_do_one_msg) - mpc8xxx_spi->spi_do_one_msg(m); - - spin_lock_irq(&mpc8xxx_spi->lock); - } - spin_unlock_irq(&mpc8xxx_spi->lock); -} - -int mpc8xxx_spi_transfer(struct spi_device *spi, - struct spi_message *m) -{ - struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - unsigned long flags; - - m->actual_length = 0; - m->status = -EINPROGRESS; - - spin_lock_irqsave(&mpc8xxx_spi->lock, flags); - list_add_tail(&m->queue, &mpc8xxx_spi->queue); - queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work); - spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags); - - return 0; -} - -void mpc8xxx_spi_cleanup(struct spi_device *spi) -{ - kfree(spi->controller_state); -} - -const char *mpc8xxx_spi_strmode(unsigned int flags) -{ - if (flags & SPI_QE_CPU_MODE) { - return "QE CPU"; - } else if (flags & SPI_CPM_MODE) { - if (flags & SPI_QE) - return "QE"; - else if (flags & SPI_CPM2) - return "CPM2"; - else - return "CPM1"; - } - return "CPU"; -} - -int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, - unsigned int irq) -{ - struct fsl_spi_platform_data *pdata = dev->platform_data; - struct spi_master *master; - struct mpc8xxx_spi *mpc8xxx_spi; - int ret = 0; - - master = dev_get_drvdata(dev); - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH - | SPI_LSB_FIRST | SPI_LOOP; - - master->transfer = mpc8xxx_spi_transfer; - master->cleanup = mpc8xxx_spi_cleanup; - master->dev.of_node = dev->of_node; - - mpc8xxx_spi = spi_master_get_devdata(master); - mpc8xxx_spi->dev = dev; - mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; - mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; - mpc8xxx_spi->flags = pdata->flags; - mpc8xxx_spi->spibrg = pdata->sysclk; - mpc8xxx_spi->irq = irq; - - mpc8xxx_spi->rx_shift = 0; - mpc8xxx_spi->tx_shift = 0; - - init_completion(&mpc8xxx_spi->done); - - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->max_chipselect; - - spin_lock_init(&mpc8xxx_spi->lock); - init_completion(&mpc8xxx_spi->done); - INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work); - INIT_LIST_HEAD(&mpc8xxx_spi->queue); - - mpc8xxx_spi->workqueue = create_singlethread_workqueue( - dev_name(master->dev.parent)); - if (mpc8xxx_spi->workqueue == NULL) { - ret = -EBUSY; - goto err; - } - - return 0; - -err: - return ret; -} - -int __devexit mpc8xxx_spi_remove(struct device *dev) -{ - struct mpc8xxx_spi *mpc8xxx_spi; - struct spi_master *master; - - master = dev_get_drvdata(dev); - mpc8xxx_spi = spi_master_get_devdata(master); - - flush_workqueue(mpc8xxx_spi->workqueue); - destroy_workqueue(mpc8xxx_spi->workqueue); - spi_unregister_master(master); - - free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); - - if (mpc8xxx_spi->spi_remove) - mpc8xxx_spi->spi_remove(mpc8xxx_spi); - - return 0; -} - -int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev) -{ - struct device *dev = &ofdev->dev; - struct device_node *np = ofdev->dev.of_node; - struct mpc8xxx_spi_probe_info *pinfo; - struct fsl_spi_platform_data *pdata; - const void *prop; - int ret = -ENOMEM; - - pinfo = kzalloc(sizeof(*pinfo), GFP_KERNEL); - if (!pinfo) - return -ENOMEM; - - pdata = &pinfo->pdata; - dev->platform_data = pdata; - - /* Allocate bus num dynamically. */ - pdata->bus_num = -1; - - /* SPI controller is either clocked from QE or SoC clock. */ - pdata->sysclk = get_brgfreq(); - if (pdata->sysclk == -1) { - pdata->sysclk = fsl_get_sys_freq(); - if (pdata->sysclk == -1) { - ret = -ENODEV; - goto err; - } - } - - prop = of_get_property(np, "mode", NULL); - if (prop && !strcmp(prop, "cpu-qe")) - pdata->flags = SPI_QE_CPU_MODE; - else if (prop && !strcmp(prop, "qe")) - pdata->flags = SPI_CPM_MODE | SPI_QE; - else if (of_device_is_compatible(np, "fsl,cpm2-spi")) - pdata->flags = SPI_CPM_MODE | SPI_CPM2; - else if (of_device_is_compatible(np, "fsl,cpm1-spi")) - pdata->flags = SPI_CPM_MODE | SPI_CPM1; - - return 0; - -err: - kfree(pinfo); - return ret; -} diff --git a/drivers/spi/spi_fsl_lib.h b/drivers/spi/spi_fsl_lib.h deleted file mode 100644 index cbe881b9ea76..000000000000 --- a/drivers/spi/spi_fsl_lib.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * Freescale SPI/eSPI controller driver library. - * - * Maintainer: Kumar Gala - * - * Copyright 2010 Freescale Semiconductor, Inc. - * Copyright (C) 2006 Polycom, Inc. - * - * CPM SPI and QE buffer descriptors mode support: - * Copyright (c) 2009 MontaVista Software, Inc. - * Author: Anton Vorontsov - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __SPI_FSL_LIB_H__ -#define __SPI_FSL_LIB_H__ - -#include - -/* SPI/eSPI Controller driver's private data. */ -struct mpc8xxx_spi { - struct device *dev; - void *reg_base; - - /* rx & tx bufs from the spi_transfer */ - const void *tx; - void *rx; -#ifdef CONFIG_SPI_FSL_ESPI - int len; -#endif - - int subblock; - struct spi_pram __iomem *pram; - struct cpm_buf_desc __iomem *tx_bd; - struct cpm_buf_desc __iomem *rx_bd; - - struct spi_transfer *xfer_in_progress; - - /* dma addresses for CPM transfers */ - dma_addr_t tx_dma; - dma_addr_t rx_dma; - bool map_tx_dma; - bool map_rx_dma; - - dma_addr_t dma_dummy_tx; - dma_addr_t dma_dummy_rx; - - /* functions to deal with different sized buffers */ - void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); - u32(*get_tx) (struct mpc8xxx_spi *); - - /* hooks for different controller driver */ - void (*spi_do_one_msg) (struct spi_message *m); - void (*spi_remove) (struct mpc8xxx_spi *mspi); - - unsigned int count; - unsigned int irq; - - unsigned nsecs; /* (clock cycle time)/2 */ - - u32 spibrg; /* SPIBRG input clock */ - u32 rx_shift; /* RX data reg shift when in qe mode */ - u32 tx_shift; /* TX data reg shift when in qe mode */ - - unsigned int flags; - - struct workqueue_struct *workqueue; - struct work_struct work; - - struct list_head queue; - spinlock_t lock; - - struct completion done; -}; - -struct spi_mpc8xxx_cs { - /* functions to deal with different sized buffers */ - void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); - u32 (*get_tx) (struct mpc8xxx_spi *); - u32 rx_shift; /* RX data reg shift when in qe mode */ - u32 tx_shift; /* TX data reg shift when in qe mode */ - u32 hw_mode; /* Holds HW mode register settings */ -}; - -static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val) -{ - out_be32(reg, val); -} - -static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg) -{ - return in_be32(reg); -} - -struct mpc8xxx_spi_probe_info { - struct fsl_spi_platform_data pdata; - int *gpios; - bool *alow_flags; -}; - -extern u32 mpc8xxx_spi_tx_buf_u8(struct mpc8xxx_spi *mpc8xxx_spi); -extern u32 mpc8xxx_spi_tx_buf_u16(struct mpc8xxx_spi *mpc8xxx_spi); -extern u32 mpc8xxx_spi_tx_buf_u32(struct mpc8xxx_spi *mpc8xxx_spi); -extern void mpc8xxx_spi_rx_buf_u8(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); -extern void mpc8xxx_spi_rx_buf_u16(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); -extern void mpc8xxx_spi_rx_buf_u32(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); - -extern struct mpc8xxx_spi_probe_info *to_of_pinfo( - struct fsl_spi_platform_data *pdata); -extern int mpc8xxx_spi_bufs(struct mpc8xxx_spi *mspi, - struct spi_transfer *t, unsigned int len); -extern int mpc8xxx_spi_transfer(struct spi_device *spi, struct spi_message *m); -extern void mpc8xxx_spi_cleanup(struct spi_device *spi); -extern const char *mpc8xxx_spi_strmode(unsigned int flags); -extern int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, - unsigned int irq); -extern int mpc8xxx_spi_remove(struct device *dev); -extern int of_mpc8xxx_spi_probe(struct platform_device *ofdev); - -#endif /* __SPI_FSL_LIB_H__ */ diff --git a/drivers/spi/spi_fsl_spi.c b/drivers/spi/spi_fsl_spi.c deleted file mode 100644 index 7963c9b49566..000000000000 --- a/drivers/spi/spi_fsl_spi.c +++ /dev/null @@ -1,1192 +0,0 @@ -/* - * Freescale SPI controller driver. - * - * Maintainer: Kumar Gala - * - * Copyright (C) 2006 Polycom, Inc. - * Copyright 2010 Freescale Semiconductor, Inc. - * - * CPM SPI and QE buffer descriptors mode support: - * Copyright (c) 2009 MontaVista Software, Inc. - * Author: Anton Vorontsov - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "spi_fsl_lib.h" - -/* CPM1 and CPM2 are mutually exclusive. */ -#ifdef CONFIG_CPM1 -#include -#define CPM_SPI_CMD mk_cr_cmd(CPM_CR_CH_SPI, 0) -#else -#include -#define CPM_SPI_CMD mk_cr_cmd(CPM_CR_SPI_PAGE, CPM_CR_SPI_SBLOCK, 0, 0) -#endif - -/* SPI Controller registers */ -struct fsl_spi_reg { - u8 res1[0x20]; - __be32 mode; - __be32 event; - __be32 mask; - __be32 command; - __be32 transmit; - __be32 receive; -}; - -/* SPI Controller mode register definitions */ -#define SPMODE_LOOP (1 << 30) -#define SPMODE_CI_INACTIVEHIGH (1 << 29) -#define SPMODE_CP_BEGIN_EDGECLK (1 << 28) -#define SPMODE_DIV16 (1 << 27) -#define SPMODE_REV (1 << 26) -#define SPMODE_MS (1 << 25) -#define SPMODE_ENABLE (1 << 24) -#define SPMODE_LEN(x) ((x) << 20) -#define SPMODE_PM(x) ((x) << 16) -#define SPMODE_OP (1 << 14) -#define SPMODE_CG(x) ((x) << 7) - -/* - * Default for SPI Mode: - * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk - */ -#define SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \ - SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf)) - -/* SPIE register values */ -#define SPIE_NE 0x00000200 /* Not empty */ -#define SPIE_NF 0x00000100 /* Not full */ - -/* SPIM register values */ -#define SPIM_NE 0x00000200 /* Not empty */ -#define SPIM_NF 0x00000100 /* Not full */ - -#define SPIE_TXB 0x00000200 /* Last char is written to tx fifo */ -#define SPIE_RXB 0x00000100 /* Last char is written to rx buf */ - -/* SPCOM register values */ -#define SPCOM_STR (1 << 23) /* Start transmit */ - -#define SPI_PRAM_SIZE 0x100 -#define SPI_MRBLR ((unsigned int)PAGE_SIZE) - -static void *fsl_dummy_rx; -static DEFINE_MUTEX(fsl_dummy_rx_lock); -static int fsl_dummy_rx_refcnt; - -static void fsl_spi_change_mode(struct spi_device *spi) -{ - struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); - struct spi_mpc8xxx_cs *cs = spi->controller_state; - struct fsl_spi_reg *reg_base = mspi->reg_base; - __be32 __iomem *mode = ®_base->mode; - unsigned long flags; - - if (cs->hw_mode == mpc8xxx_spi_read_reg(mode)) - return; - - /* Turn off IRQs locally to minimize time that SPI is disabled. */ - local_irq_save(flags); - - /* Turn off SPI unit prior changing mode */ - mpc8xxx_spi_write_reg(mode, cs->hw_mode & ~SPMODE_ENABLE); - - /* When in CPM mode, we need to reinit tx and rx. */ - if (mspi->flags & SPI_CPM_MODE) { - if (mspi->flags & SPI_QE) { - qe_issue_cmd(QE_INIT_TX_RX, mspi->subblock, - QE_CR_PROTOCOL_UNSPECIFIED, 0); - } else { - cpm_command(CPM_SPI_CMD, CPM_CR_INIT_TRX); - if (mspi->flags & SPI_CPM1) { - out_be16(&mspi->pram->rbptr, - in_be16(&mspi->pram->rbase)); - out_be16(&mspi->pram->tbptr, - in_be16(&mspi->pram->tbase)); - } - } - } - mpc8xxx_spi_write_reg(mode, cs->hw_mode); - local_irq_restore(flags); -} - -static void fsl_spi_chipselect(struct spi_device *spi, int value) -{ - struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - struct fsl_spi_platform_data *pdata = spi->dev.parent->platform_data; - bool pol = spi->mode & SPI_CS_HIGH; - struct spi_mpc8xxx_cs *cs = spi->controller_state; - - if (value == BITBANG_CS_INACTIVE) { - if (pdata->cs_control) - pdata->cs_control(spi, !pol); - } - - if (value == BITBANG_CS_ACTIVE) { - mpc8xxx_spi->rx_shift = cs->rx_shift; - mpc8xxx_spi->tx_shift = cs->tx_shift; - mpc8xxx_spi->get_rx = cs->get_rx; - mpc8xxx_spi->get_tx = cs->get_tx; - - fsl_spi_change_mode(spi); - - if (pdata->cs_control) - pdata->cs_control(spi, pol); - } -} - -static int mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, - struct spi_device *spi, - struct mpc8xxx_spi *mpc8xxx_spi, - int bits_per_word) -{ - cs->rx_shift = 0; - cs->tx_shift = 0; - if (bits_per_word <= 8) { - cs->get_rx = mpc8xxx_spi_rx_buf_u8; - cs->get_tx = mpc8xxx_spi_tx_buf_u8; - if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { - cs->rx_shift = 16; - cs->tx_shift = 24; - } - } else if (bits_per_word <= 16) { - cs->get_rx = mpc8xxx_spi_rx_buf_u16; - cs->get_tx = mpc8xxx_spi_tx_buf_u16; - if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { - cs->rx_shift = 16; - cs->tx_shift = 16; - } - } else if (bits_per_word <= 32) { - cs->get_rx = mpc8xxx_spi_rx_buf_u32; - cs->get_tx = mpc8xxx_spi_tx_buf_u32; - } else - return -EINVAL; - - if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE && - spi->mode & SPI_LSB_FIRST) { - cs->tx_shift = 0; - if (bits_per_word <= 8) - cs->rx_shift = 8; - else - cs->rx_shift = 0; - } - mpc8xxx_spi->rx_shift = cs->rx_shift; - mpc8xxx_spi->tx_shift = cs->tx_shift; - mpc8xxx_spi->get_rx = cs->get_rx; - mpc8xxx_spi->get_tx = cs->get_tx; - - return bits_per_word; -} - -static int mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, - struct spi_device *spi, - int bits_per_word) -{ - /* QE uses Little Endian for words > 8 - * so transform all words > 8 into 8 bits - * Unfortnatly that doesn't work for LSB so - * reject these for now */ - /* Note: 32 bits word, LSB works iff - * tfcr/rfcr is set to CPMFCR_GBL */ - if (spi->mode & SPI_LSB_FIRST && - bits_per_word > 8) - return -EINVAL; - if (bits_per_word > 8) - return 8; /* pretend its 8 bits */ - return bits_per_word; -} - -static int fsl_spi_setup_transfer(struct spi_device *spi, - struct spi_transfer *t) -{ - struct mpc8xxx_spi *mpc8xxx_spi; - int bits_per_word = 0; - u8 pm; - u32 hz = 0; - struct spi_mpc8xxx_cs *cs = spi->controller_state; - - mpc8xxx_spi = spi_master_get_devdata(spi->master); - - if (t) { - bits_per_word = t->bits_per_word; - hz = t->speed_hz; - } - - /* spi_transfer level calls that work per-word */ - if (!bits_per_word) - bits_per_word = spi->bits_per_word; - - /* Make sure its a bit width we support [4..16, 32] */ - if ((bits_per_word < 4) - || ((bits_per_word > 16) && (bits_per_word != 32))) - return -EINVAL; - - if (!hz) - hz = spi->max_speed_hz; - - if (!(mpc8xxx_spi->flags & SPI_CPM_MODE)) - bits_per_word = mspi_apply_cpu_mode_quirks(cs, spi, - mpc8xxx_spi, - bits_per_word); - else if (mpc8xxx_spi->flags & SPI_QE) - bits_per_word = mspi_apply_qe_mode_quirks(cs, spi, - bits_per_word); - - if (bits_per_word < 0) - return bits_per_word; - - if (bits_per_word == 32) - bits_per_word = 0; - else - bits_per_word = bits_per_word - 1; - - /* mask out bits we are going to set */ - cs->hw_mode &= ~(SPMODE_LEN(0xF) | SPMODE_DIV16 - | SPMODE_PM(0xF)); - - cs->hw_mode |= SPMODE_LEN(bits_per_word); - - if ((mpc8xxx_spi->spibrg / hz) > 64) { - cs->hw_mode |= SPMODE_DIV16; - pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1; - - WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " - "Will use %d Hz instead.\n", dev_name(&spi->dev), - hz, mpc8xxx_spi->spibrg / 1024); - if (pm > 16) - pm = 16; - } else { - pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; - } - if (pm) - pm--; - - cs->hw_mode |= SPMODE_PM(pm); - - fsl_spi_change_mode(spi); - return 0; -} - -static void fsl_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) -{ - struct cpm_buf_desc __iomem *tx_bd = mspi->tx_bd; - struct cpm_buf_desc __iomem *rx_bd = mspi->rx_bd; - unsigned int xfer_len = min(mspi->count, SPI_MRBLR); - unsigned int xfer_ofs; - struct fsl_spi_reg *reg_base = mspi->reg_base; - - xfer_ofs = mspi->xfer_in_progress->len - mspi->count; - - if (mspi->rx_dma == mspi->dma_dummy_rx) - out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma); - else - out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs); - out_be16(&rx_bd->cbd_datlen, 0); - out_be16(&rx_bd->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT | BD_SC_WRAP); - - if (mspi->tx_dma == mspi->dma_dummy_tx) - out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma); - else - out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs); - out_be16(&tx_bd->cbd_datlen, xfer_len); - out_be16(&tx_bd->cbd_sc, BD_SC_READY | BD_SC_INTRPT | BD_SC_WRAP | - BD_SC_LAST); - - /* start transfer */ - mpc8xxx_spi_write_reg(®_base->command, SPCOM_STR); -} - -static int fsl_spi_cpm_bufs(struct mpc8xxx_spi *mspi, - struct spi_transfer *t, bool is_dma_mapped) -{ - struct device *dev = mspi->dev; - struct fsl_spi_reg *reg_base = mspi->reg_base; - - if (is_dma_mapped) { - mspi->map_tx_dma = 0; - mspi->map_rx_dma = 0; - } else { - mspi->map_tx_dma = 1; - mspi->map_rx_dma = 1; - } - - if (!t->tx_buf) { - mspi->tx_dma = mspi->dma_dummy_tx; - mspi->map_tx_dma = 0; - } - - if (!t->rx_buf) { - mspi->rx_dma = mspi->dma_dummy_rx; - mspi->map_rx_dma = 0; - } - - if (mspi->map_tx_dma) { - void *nonconst_tx = (void *)mspi->tx; /* shut up gcc */ - - mspi->tx_dma = dma_map_single(dev, nonconst_tx, t->len, - DMA_TO_DEVICE); - if (dma_mapping_error(dev, mspi->tx_dma)) { - dev_err(dev, "unable to map tx dma\n"); - return -ENOMEM; - } - } else if (t->tx_buf) { - mspi->tx_dma = t->tx_dma; - } - - if (mspi->map_rx_dma) { - mspi->rx_dma = dma_map_single(dev, mspi->rx, t->len, - DMA_FROM_DEVICE); - if (dma_mapping_error(dev, mspi->rx_dma)) { - dev_err(dev, "unable to map rx dma\n"); - goto err_rx_dma; - } - } else if (t->rx_buf) { - mspi->rx_dma = t->rx_dma; - } - - /* enable rx ints */ - mpc8xxx_spi_write_reg(®_base->mask, SPIE_RXB); - - mspi->xfer_in_progress = t; - mspi->count = t->len; - - /* start CPM transfers */ - fsl_spi_cpm_bufs_start(mspi); - - return 0; - -err_rx_dma: - if (mspi->map_tx_dma) - dma_unmap_single(dev, mspi->tx_dma, t->len, DMA_TO_DEVICE); - return -ENOMEM; -} - -static void fsl_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) -{ - struct device *dev = mspi->dev; - struct spi_transfer *t = mspi->xfer_in_progress; - - if (mspi->map_tx_dma) - dma_unmap_single(dev, mspi->tx_dma, t->len, DMA_TO_DEVICE); - if (mspi->map_rx_dma) - dma_unmap_single(dev, mspi->rx_dma, t->len, DMA_FROM_DEVICE); - mspi->xfer_in_progress = NULL; -} - -static int fsl_spi_cpu_bufs(struct mpc8xxx_spi *mspi, - struct spi_transfer *t, unsigned int len) -{ - u32 word; - struct fsl_spi_reg *reg_base = mspi->reg_base; - - mspi->count = len; - - /* enable rx ints */ - mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE); - - /* transmit word */ - word = mspi->get_tx(mspi); - mpc8xxx_spi_write_reg(®_base->transmit, word); - - return 0; -} - -static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t, - bool is_dma_mapped) -{ - struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - struct fsl_spi_reg *reg_base; - unsigned int len = t->len; - u8 bits_per_word; - int ret; - - reg_base = mpc8xxx_spi->reg_base; - bits_per_word = spi->bits_per_word; - if (t->bits_per_word) - bits_per_word = t->bits_per_word; - - if (bits_per_word > 8) { - /* invalid length? */ - if (len & 1) - return -EINVAL; - len /= 2; - } - if (bits_per_word > 16) { - /* invalid length? */ - if (len & 1) - return -EINVAL; - len /= 2; - } - - mpc8xxx_spi->tx = t->tx_buf; - mpc8xxx_spi->rx = t->rx_buf; - - INIT_COMPLETION(mpc8xxx_spi->done); - - if (mpc8xxx_spi->flags & SPI_CPM_MODE) - ret = fsl_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped); - else - ret = fsl_spi_cpu_bufs(mpc8xxx_spi, t, len); - if (ret) - return ret; - - wait_for_completion(&mpc8xxx_spi->done); - - /* disable rx ints */ - mpc8xxx_spi_write_reg(®_base->mask, 0); - - if (mpc8xxx_spi->flags & SPI_CPM_MODE) - fsl_spi_cpm_bufs_complete(mpc8xxx_spi); - - return mpc8xxx_spi->count; -} - -static void fsl_spi_do_one_msg(struct spi_message *m) -{ - struct spi_device *spi = m->spi; - struct spi_transfer *t; - unsigned int cs_change; - const int nsecs = 50; - int status; - - cs_change = 1; - status = 0; - list_for_each_entry(t, &m->transfers, transfer_list) { - if (t->bits_per_word || t->speed_hz) { - /* Don't allow changes if CS is active */ - status = -EINVAL; - - if (cs_change) - status = fsl_spi_setup_transfer(spi, t); - if (status < 0) - break; - } - - if (cs_change) { - fsl_spi_chipselect(spi, BITBANG_CS_ACTIVE); - ndelay(nsecs); - } - cs_change = t->cs_change; - if (t->len) - status = fsl_spi_bufs(spi, t, m->is_dma_mapped); - if (status) { - status = -EMSGSIZE; - break; - } - m->actual_length += t->len; - - if (t->delay_usecs) - udelay(t->delay_usecs); - - if (cs_change) { - ndelay(nsecs); - fsl_spi_chipselect(spi, BITBANG_CS_INACTIVE); - ndelay(nsecs); - } - } - - m->status = status; - m->complete(m->context); - - if (status || !cs_change) { - ndelay(nsecs); - fsl_spi_chipselect(spi, BITBANG_CS_INACTIVE); - } - - fsl_spi_setup_transfer(spi, NULL); -} - -static int fsl_spi_setup(struct spi_device *spi) -{ - struct mpc8xxx_spi *mpc8xxx_spi; - struct fsl_spi_reg *reg_base; - int retval; - u32 hw_mode; - struct spi_mpc8xxx_cs *cs = spi->controller_state; - - if (!spi->max_speed_hz) - return -EINVAL; - - if (!cs) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); - if (!cs) - return -ENOMEM; - spi->controller_state = cs; - } - mpc8xxx_spi = spi_master_get_devdata(spi->master); - - reg_base = mpc8xxx_spi->reg_base; - - hw_mode = cs->hw_mode; /* Save original settings */ - cs->hw_mode = mpc8xxx_spi_read_reg(®_base->mode); - /* mask out bits we are going to set */ - cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH - | SPMODE_REV | SPMODE_LOOP); - - if (spi->mode & SPI_CPHA) - cs->hw_mode |= SPMODE_CP_BEGIN_EDGECLK; - if (spi->mode & SPI_CPOL) - cs->hw_mode |= SPMODE_CI_INACTIVEHIGH; - if (!(spi->mode & SPI_LSB_FIRST)) - cs->hw_mode |= SPMODE_REV; - if (spi->mode & SPI_LOOP) - cs->hw_mode |= SPMODE_LOOP; - - retval = fsl_spi_setup_transfer(spi, NULL); - if (retval < 0) { - cs->hw_mode = hw_mode; /* Restore settings */ - return retval; - } - return 0; -} - -static void fsl_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) -{ - u16 len; - struct fsl_spi_reg *reg_base = mspi->reg_base; - - dev_dbg(mspi->dev, "%s: bd datlen %d, count %d\n", __func__, - in_be16(&mspi->rx_bd->cbd_datlen), mspi->count); - - len = in_be16(&mspi->rx_bd->cbd_datlen); - if (len > mspi->count) { - WARN_ON(1); - len = mspi->count; - } - - /* Clear the events */ - mpc8xxx_spi_write_reg(®_base->event, events); - - mspi->count -= len; - if (mspi->count) - fsl_spi_cpm_bufs_start(mspi); - else - complete(&mspi->done); -} - -static void fsl_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) -{ - struct fsl_spi_reg *reg_base = mspi->reg_base; - - /* We need handle RX first */ - if (events & SPIE_NE) { - u32 rx_data = mpc8xxx_spi_read_reg(®_base->receive); - - if (mspi->rx) - mspi->get_rx(rx_data, mspi); - } - - if ((events & SPIE_NF) == 0) - /* spin until TX is done */ - while (((events = - mpc8xxx_spi_read_reg(®_base->event)) & - SPIE_NF) == 0) - cpu_relax(); - - /* Clear the events */ - mpc8xxx_spi_write_reg(®_base->event, events); - - mspi->count -= 1; - if (mspi->count) { - u32 word = mspi->get_tx(mspi); - - mpc8xxx_spi_write_reg(®_base->transmit, word); - } else { - complete(&mspi->done); - } -} - -static irqreturn_t fsl_spi_irq(s32 irq, void *context_data) -{ - struct mpc8xxx_spi *mspi = context_data; - irqreturn_t ret = IRQ_NONE; - u32 events; - struct fsl_spi_reg *reg_base = mspi->reg_base; - - /* Get interrupt events(tx/rx) */ - events = mpc8xxx_spi_read_reg(®_base->event); - if (events) - ret = IRQ_HANDLED; - - dev_dbg(mspi->dev, "%s: events %x\n", __func__, events); - - if (mspi->flags & SPI_CPM_MODE) - fsl_spi_cpm_irq(mspi, events); - else - fsl_spi_cpu_irq(mspi, events); - - return ret; -} - -static void *fsl_spi_alloc_dummy_rx(void) -{ - mutex_lock(&fsl_dummy_rx_lock); - - if (!fsl_dummy_rx) - fsl_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL); - if (fsl_dummy_rx) - fsl_dummy_rx_refcnt++; - - mutex_unlock(&fsl_dummy_rx_lock); - - return fsl_dummy_rx; -} - -static void fsl_spi_free_dummy_rx(void) -{ - mutex_lock(&fsl_dummy_rx_lock); - - switch (fsl_dummy_rx_refcnt) { - case 0: - WARN_ON(1); - break; - case 1: - kfree(fsl_dummy_rx); - fsl_dummy_rx = NULL; - /* fall through */ - default: - fsl_dummy_rx_refcnt--; - break; - } - - mutex_unlock(&fsl_dummy_rx_lock); -} - -static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) -{ - struct device *dev = mspi->dev; - struct device_node *np = dev->of_node; - const u32 *iprop; - int size; - unsigned long spi_base_ofs; - unsigned long pram_ofs = -ENOMEM; - - /* Can't use of_address_to_resource(), QE muram isn't at 0. */ - iprop = of_get_property(np, "reg", &size); - - /* QE with a fixed pram location? */ - if (mspi->flags & SPI_QE && iprop && size == sizeof(*iprop) * 4) - return cpm_muram_alloc_fixed(iprop[2], SPI_PRAM_SIZE); - - /* QE but with a dynamic pram location? */ - if (mspi->flags & SPI_QE) { - pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); - qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, mspi->subblock, - QE_CR_PROTOCOL_UNSPECIFIED, pram_ofs); - return pram_ofs; - } - - /* CPM1 and CPM2 pram must be at a fixed addr. */ - if (!iprop || size != sizeof(*iprop) * 4) - return -ENOMEM; - - spi_base_ofs = cpm_muram_alloc_fixed(iprop[2], 2); - if (IS_ERR_VALUE(spi_base_ofs)) - return -ENOMEM; - - if (mspi->flags & SPI_CPM2) { - pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); - if (!IS_ERR_VALUE(pram_ofs)) { - u16 __iomem *spi_base = cpm_muram_addr(spi_base_ofs); - - out_be16(spi_base, pram_ofs); - } - } else { - struct spi_pram __iomem *pram = cpm_muram_addr(spi_base_ofs); - u16 rpbase = in_be16(&pram->rpbase); - - /* Microcode relocation patch applied? */ - if (rpbase) - pram_ofs = rpbase; - else - return spi_base_ofs; - } - - cpm_muram_free(spi_base_ofs); - return pram_ofs; -} - -static int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) -{ - struct device *dev = mspi->dev; - struct device_node *np = dev->of_node; - const u32 *iprop; - int size; - unsigned long pram_ofs; - unsigned long bds_ofs; - - if (!(mspi->flags & SPI_CPM_MODE)) - return 0; - - if (!fsl_spi_alloc_dummy_rx()) - return -ENOMEM; - - if (mspi->flags & SPI_QE) { - iprop = of_get_property(np, "cell-index", &size); - if (iprop && size == sizeof(*iprop)) - mspi->subblock = *iprop; - - switch (mspi->subblock) { - default: - dev_warn(dev, "cell-index unspecified, assuming SPI1"); - /* fall through */ - case 0: - mspi->subblock = QE_CR_SUBBLOCK_SPI1; - break; - case 1: - mspi->subblock = QE_CR_SUBBLOCK_SPI2; - break; - } - } - - pram_ofs = fsl_spi_cpm_get_pram(mspi); - if (IS_ERR_VALUE(pram_ofs)) { - dev_err(dev, "can't allocate spi parameter ram\n"); - goto err_pram; - } - - bds_ofs = cpm_muram_alloc(sizeof(*mspi->tx_bd) + - sizeof(*mspi->rx_bd), 8); - if (IS_ERR_VALUE(bds_ofs)) { - dev_err(dev, "can't allocate bds\n"); - goto err_bds; - } - - mspi->dma_dummy_tx = dma_map_single(dev, empty_zero_page, PAGE_SIZE, - DMA_TO_DEVICE); - if (dma_mapping_error(dev, mspi->dma_dummy_tx)) { - dev_err(dev, "unable to map dummy tx buffer\n"); - goto err_dummy_tx; - } - - mspi->dma_dummy_rx = dma_map_single(dev, fsl_dummy_rx, SPI_MRBLR, - DMA_FROM_DEVICE); - if (dma_mapping_error(dev, mspi->dma_dummy_rx)) { - dev_err(dev, "unable to map dummy rx buffer\n"); - goto err_dummy_rx; - } - - mspi->pram = cpm_muram_addr(pram_ofs); - - mspi->tx_bd = cpm_muram_addr(bds_ofs); - mspi->rx_bd = cpm_muram_addr(bds_ofs + sizeof(*mspi->tx_bd)); - - /* Initialize parameter ram. */ - out_be16(&mspi->pram->tbase, cpm_muram_offset(mspi->tx_bd)); - out_be16(&mspi->pram->rbase, cpm_muram_offset(mspi->rx_bd)); - out_8(&mspi->pram->tfcr, CPMFCR_EB | CPMFCR_GBL); - out_8(&mspi->pram->rfcr, CPMFCR_EB | CPMFCR_GBL); - out_be16(&mspi->pram->mrblr, SPI_MRBLR); - out_be32(&mspi->pram->rstate, 0); - out_be32(&mspi->pram->rdp, 0); - out_be16(&mspi->pram->rbptr, 0); - out_be16(&mspi->pram->rbc, 0); - out_be32(&mspi->pram->rxtmp, 0); - out_be32(&mspi->pram->tstate, 0); - out_be32(&mspi->pram->tdp, 0); - out_be16(&mspi->pram->tbptr, 0); - out_be16(&mspi->pram->tbc, 0); - out_be32(&mspi->pram->txtmp, 0); - - return 0; - -err_dummy_rx: - dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); -err_dummy_tx: - cpm_muram_free(bds_ofs); -err_bds: - cpm_muram_free(pram_ofs); -err_pram: - fsl_spi_free_dummy_rx(); - return -ENOMEM; -} - -static void fsl_spi_cpm_free(struct mpc8xxx_spi *mspi) -{ - struct device *dev = mspi->dev; - - dma_unmap_single(dev, mspi->dma_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE); - dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); - cpm_muram_free(cpm_muram_offset(mspi->tx_bd)); - cpm_muram_free(cpm_muram_offset(mspi->pram)); - fsl_spi_free_dummy_rx(); -} - -static void fsl_spi_remove(struct mpc8xxx_spi *mspi) -{ - iounmap(mspi->reg_base); - fsl_spi_cpm_free(mspi); -} - -static struct spi_master * __devinit fsl_spi_probe(struct device *dev, - struct resource *mem, unsigned int irq) -{ - struct fsl_spi_platform_data *pdata = dev->platform_data; - struct spi_master *master; - struct mpc8xxx_spi *mpc8xxx_spi; - struct fsl_spi_reg *reg_base; - u32 regval; - int ret = 0; - - master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi)); - if (master == NULL) { - ret = -ENOMEM; - goto err; - } - - dev_set_drvdata(dev, master); - - ret = mpc8xxx_spi_probe(dev, mem, irq); - if (ret) - goto err_probe; - - master->setup = fsl_spi_setup; - - mpc8xxx_spi = spi_master_get_devdata(master); - mpc8xxx_spi->spi_do_one_msg = fsl_spi_do_one_msg; - mpc8xxx_spi->spi_remove = fsl_spi_remove; - - - ret = fsl_spi_cpm_init(mpc8xxx_spi); - if (ret) - goto err_cpm_init; - - if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { - mpc8xxx_spi->rx_shift = 16; - mpc8xxx_spi->tx_shift = 24; - } - - mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem)); - if (mpc8xxx_spi->reg_base == NULL) { - ret = -ENOMEM; - goto err_ioremap; - } - - /* Register for SPI Interrupt */ - ret = request_irq(mpc8xxx_spi->irq, fsl_spi_irq, - 0, "fsl_spi", mpc8xxx_spi); - - if (ret != 0) - goto free_irq; - - reg_base = mpc8xxx_spi->reg_base; - - /* SPI controller initializations */ - mpc8xxx_spi_write_reg(®_base->mode, 0); - mpc8xxx_spi_write_reg(®_base->mask, 0); - mpc8xxx_spi_write_reg(®_base->command, 0); - mpc8xxx_spi_write_reg(®_base->event, 0xffffffff); - - /* Enable SPI interface */ - regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; - if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) - regval |= SPMODE_OP; - - mpc8xxx_spi_write_reg(®_base->mode, regval); - - ret = spi_register_master(master); - if (ret < 0) - goto unreg_master; - - dev_info(dev, "at 0x%p (irq = %d), %s mode\n", reg_base, - mpc8xxx_spi->irq, mpc8xxx_spi_strmode(mpc8xxx_spi->flags)); - - return master; - -unreg_master: - free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); -free_irq: - iounmap(mpc8xxx_spi->reg_base); -err_ioremap: - fsl_spi_cpm_free(mpc8xxx_spi); -err_cpm_init: -err_probe: - spi_master_put(master); -err: - return ERR_PTR(ret); -} - -static void fsl_spi_cs_control(struct spi_device *spi, bool on) -{ - struct device *dev = spi->dev.parent; - struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data); - u16 cs = spi->chip_select; - int gpio = pinfo->gpios[cs]; - bool alow = pinfo->alow_flags[cs]; - - gpio_set_value(gpio, on ^ alow); -} - -static int of_fsl_spi_get_chipselects(struct device *dev) -{ - struct device_node *np = dev->of_node; - struct fsl_spi_platform_data *pdata = dev->platform_data; - struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); - unsigned int ngpios; - int i = 0; - int ret; - - ngpios = of_gpio_count(np); - if (!ngpios) { - /* - * SPI w/o chip-select line. One SPI device is still permitted - * though. - */ - pdata->max_chipselect = 1; - return 0; - } - - pinfo->gpios = kmalloc(ngpios * sizeof(*pinfo->gpios), GFP_KERNEL); - if (!pinfo->gpios) - return -ENOMEM; - memset(pinfo->gpios, -1, ngpios * sizeof(*pinfo->gpios)); - - pinfo->alow_flags = kzalloc(ngpios * sizeof(*pinfo->alow_flags), - GFP_KERNEL); - if (!pinfo->alow_flags) { - ret = -ENOMEM; - goto err_alloc_flags; - } - - for (; i < ngpios; i++) { - int gpio; - enum of_gpio_flags flags; - - gpio = of_get_gpio_flags(np, i, &flags); - if (!gpio_is_valid(gpio)) { - dev_err(dev, "invalid gpio #%d: %d\n", i, gpio); - ret = gpio; - goto err_loop; - } - - ret = gpio_request(gpio, dev_name(dev)); - if (ret) { - dev_err(dev, "can't request gpio #%d: %d\n", i, ret); - goto err_loop; - } - - pinfo->gpios[i] = gpio; - pinfo->alow_flags[i] = flags & OF_GPIO_ACTIVE_LOW; - - ret = gpio_direction_output(pinfo->gpios[i], - pinfo->alow_flags[i]); - if (ret) { - dev_err(dev, "can't set output direction for gpio " - "#%d: %d\n", i, ret); - goto err_loop; - } - } - - pdata->max_chipselect = ngpios; - pdata->cs_control = fsl_spi_cs_control; - - return 0; - -err_loop: - while (i >= 0) { - if (gpio_is_valid(pinfo->gpios[i])) - gpio_free(pinfo->gpios[i]); - i--; - } - - kfree(pinfo->alow_flags); - pinfo->alow_flags = NULL; -err_alloc_flags: - kfree(pinfo->gpios); - pinfo->gpios = NULL; - return ret; -} - -static int of_fsl_spi_free_chipselects(struct device *dev) -{ - struct fsl_spi_platform_data *pdata = dev->platform_data; - struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); - int i; - - if (!pinfo->gpios) - return 0; - - for (i = 0; i < pdata->max_chipselect; i++) { - if (gpio_is_valid(pinfo->gpios[i])) - gpio_free(pinfo->gpios[i]); - } - - kfree(pinfo->gpios); - kfree(pinfo->alow_flags); - return 0; -} - -static int __devinit of_fsl_spi_probe(struct platform_device *ofdev) -{ - struct device *dev = &ofdev->dev; - struct device_node *np = ofdev->dev.of_node; - struct spi_master *master; - struct resource mem; - struct resource irq; - int ret = -ENOMEM; - - ret = of_mpc8xxx_spi_probe(ofdev); - if (ret) - return ret; - - ret = of_fsl_spi_get_chipselects(dev); - if (ret) - goto err; - - ret = of_address_to_resource(np, 0, &mem); - if (ret) - goto err; - - ret = of_irq_to_resource(np, 0, &irq); - if (!ret) { - ret = -EINVAL; - goto err; - } - - master = fsl_spi_probe(dev, &mem, irq.start); - if (IS_ERR(master)) { - ret = PTR_ERR(master); - goto err; - } - - return 0; - -err: - of_fsl_spi_free_chipselects(dev); - return ret; -} - -static int __devexit of_fsl_spi_remove(struct platform_device *ofdev) -{ - int ret; - - ret = mpc8xxx_spi_remove(&ofdev->dev); - if (ret) - return ret; - of_fsl_spi_free_chipselects(&ofdev->dev); - return 0; -} - -static const struct of_device_id of_fsl_spi_match[] = { - { .compatible = "fsl,spi" }, - {} -}; -MODULE_DEVICE_TABLE(of, of_fsl_spi_match); - -static struct platform_driver of_fsl_spi_driver = { - .driver = { - .name = "fsl_spi", - .owner = THIS_MODULE, - .of_match_table = of_fsl_spi_match, - }, - .probe = of_fsl_spi_probe, - .remove = __devexit_p(of_fsl_spi_remove), -}; - -#ifdef CONFIG_MPC832x_RDB -/* - * XXX XXX XXX - * This is "legacy" platform driver, was used by the MPC8323E-RDB boards - * only. The driver should go away soon, since newer MPC8323E-RDB's device - * tree can work with OpenFirmware driver. But for now we support old trees - * as well. - */ -static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev) -{ - struct resource *mem; - int irq; - struct spi_master *master; - - if (!pdev->dev.platform_data) - return -EINVAL; - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) - return -EINVAL; - - irq = platform_get_irq(pdev, 0); - if (irq <= 0) - return -EINVAL; - - master = fsl_spi_probe(&pdev->dev, mem, irq); - if (IS_ERR(master)) - return PTR_ERR(master); - return 0; -} - -static int __devexit plat_mpc8xxx_spi_remove(struct platform_device *pdev) -{ - return mpc8xxx_spi_remove(&pdev->dev); -} - -MODULE_ALIAS("platform:mpc8xxx_spi"); -static struct platform_driver mpc8xxx_spi_driver = { - .probe = plat_mpc8xxx_spi_probe, - .remove = __devexit_p(plat_mpc8xxx_spi_remove), - .driver = { - .name = "mpc8xxx_spi", - .owner = THIS_MODULE, - }, -}; - -static bool legacy_driver_failed; - -static void __init legacy_driver_register(void) -{ - legacy_driver_failed = platform_driver_register(&mpc8xxx_spi_driver); -} - -static void __exit legacy_driver_unregister(void) -{ - if (legacy_driver_failed) - return; - platform_driver_unregister(&mpc8xxx_spi_driver); -} -#else -static void __init legacy_driver_register(void) {} -static void __exit legacy_driver_unregister(void) {} -#endif /* CONFIG_MPC832x_RDB */ - -static int __init fsl_spi_init(void) -{ - legacy_driver_register(); - return platform_driver_register(&of_fsl_spi_driver); -} -module_init(fsl_spi_init); - -static void __exit fsl_spi_exit(void) -{ - platform_driver_unregister(&of_fsl_spi_driver); - legacy_driver_unregister(); -} -module_exit(fsl_spi_exit); - -MODULE_AUTHOR("Kumar Gala"); -MODULE_DESCRIPTION("Simple Freescale SPI Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_gpio.c b/drivers/spi/spi_gpio.c deleted file mode 100644 index 63e51b011d50..000000000000 --- a/drivers/spi/spi_gpio.c +++ /dev/null @@ -1,429 +0,0 @@ -/* - * spi_gpio.c - SPI master driver using generic bitbanged GPIO - * - * Copyright (C) 2006,2008 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include - -#include -#include -#include - - -/* - * This bitbanging SPI master driver should help make systems usable - * when a native hardware SPI engine is not available, perhaps because - * its driver isn't yet working or because the I/O pins it requires - * are used for other purposes. - * - * platform_device->driver_data ... points to spi_gpio - * - * spi->controller_state ... reserved for bitbang framework code - * spi->controller_data ... holds chipselect GPIO - * - * spi->master->dev.driver_data ... points to spi_gpio->bitbang - */ - -struct spi_gpio { - struct spi_bitbang bitbang; - struct spi_gpio_platform_data pdata; - struct platform_device *pdev; -}; - -/*----------------------------------------------------------------------*/ - -/* - * Because the overhead of going through four GPIO procedure calls - * per transferred bit can make performance a problem, this code - * is set up so that you can use it in either of two ways: - * - * - The slow generic way: set up platform_data to hold the GPIO - * numbers used for MISO/MOSI/SCK, and issue procedure calls for - * each of them. This driver can handle several such busses. - * - * - The quicker inlined way: only helps with platform GPIO code - * that inlines operations for constant GPIOs. This can give - * you tight (fast!) inner loops, but each such bus needs a - * new driver. You'll define a new C file, with Makefile and - * Kconfig support; the C code can be a total of six lines: - * - * #define DRIVER_NAME "myboard_spi2" - * #define SPI_MISO_GPIO 119 - * #define SPI_MOSI_GPIO 120 - * #define SPI_SCK_GPIO 121 - * #define SPI_N_CHIPSEL 4 - * #include "spi_gpio.c" - */ - -#ifndef DRIVER_NAME -#define DRIVER_NAME "spi_gpio" - -#define GENERIC_BITBANG /* vs tight inlines */ - -/* all functions referencing these symbols must define pdata */ -#define SPI_MISO_GPIO ((pdata)->miso) -#define SPI_MOSI_GPIO ((pdata)->mosi) -#define SPI_SCK_GPIO ((pdata)->sck) - -#define SPI_N_CHIPSEL ((pdata)->num_chipselect) - -#endif - -/*----------------------------------------------------------------------*/ - -static inline const struct spi_gpio_platform_data * __pure -spi_to_pdata(const struct spi_device *spi) -{ - const struct spi_bitbang *bang; - const struct spi_gpio *spi_gpio; - - bang = spi_master_get_devdata(spi->master); - spi_gpio = container_of(bang, struct spi_gpio, bitbang); - return &spi_gpio->pdata; -} - -/* this is #defined to avoid unused-variable warnings when inlining */ -#define pdata spi_to_pdata(spi) - -static inline void setsck(const struct spi_device *spi, int is_on) -{ - gpio_set_value(SPI_SCK_GPIO, is_on); -} - -static inline void setmosi(const struct spi_device *spi, int is_on) -{ - gpio_set_value(SPI_MOSI_GPIO, is_on); -} - -static inline int getmiso(const struct spi_device *spi) -{ - return !!gpio_get_value(SPI_MISO_GPIO); -} - -#undef pdata - -/* - * NOTE: this clocks "as fast as we can". It "should" be a function of the - * requested device clock. Software overhead means we usually have trouble - * reaching even one Mbit/sec (except when we can inline bitops), so for now - * we'll just assume we never need additional per-bit slowdowns. - */ -#define spidelay(nsecs) do {} while (0) - -#include "spi_bitbang_txrx.h" - -/* - * These functions can leverage inline expansion of GPIO calls to shrink - * costs for a txrx bit, often by factors of around ten (by instruction - * count). That is particularly visible for larger word sizes, but helps - * even with default 8-bit words. - * - * REVISIT overheads calling these functions for each word also have - * significant performance costs. Having txrx_bufs() calls that inline - * the txrx_word() logic would help performance, e.g. on larger blocks - * used with flash storage or MMC/SD. There should also be ways to make - * GCC be less stupid about reloading registers inside the I/O loops, - * even without inlined GPIO calls; __attribute__((hot)) on GCC 4.3? - */ - -static u32 spi_gpio_txrx_word_mode0(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); -} - -static u32 spi_gpio_txrx_word_mode1(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); -} - -static u32 spi_gpio_txrx_word_mode2(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); -} - -static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); -} - -/* - * These functions do not call setmosi or getmiso if respective flag - * (SPI_MASTER_NO_RX or SPI_MASTER_NO_TX) is set, so they are safe to - * call when such pin is not present or defined in the controller. - * A separate set of callbacks is defined to get highest possible - * speed in the generic case (when both MISO and MOSI lines are - * available), as optimiser will remove the checks when argument is - * constant. - */ - -static u32 spi_gpio_spec_txrx_word_mode0(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - unsigned flags = spi->master->flags; - return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits); -} - -static u32 spi_gpio_spec_txrx_word_mode1(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - unsigned flags = spi->master->flags; - return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits); -} - -static u32 spi_gpio_spec_txrx_word_mode2(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - unsigned flags = spi->master->flags; - return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits); -} - -static u32 spi_gpio_spec_txrx_word_mode3(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - unsigned flags = spi->master->flags; - return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits); -} - -/*----------------------------------------------------------------------*/ - -static void spi_gpio_chipselect(struct spi_device *spi, int is_active) -{ - unsigned long cs = (unsigned long) spi->controller_data; - - /* set initial clock polarity */ - if (is_active) - setsck(spi, spi->mode & SPI_CPOL); - - if (cs != SPI_GPIO_NO_CHIPSELECT) { - /* SPI is normally active-low */ - gpio_set_value(cs, (spi->mode & SPI_CS_HIGH) ? is_active : !is_active); - } -} - -static int spi_gpio_setup(struct spi_device *spi) -{ - unsigned long cs = (unsigned long) spi->controller_data; - int status = 0; - - if (spi->bits_per_word > 32) - return -EINVAL; - - if (!spi->controller_state) { - if (cs != SPI_GPIO_NO_CHIPSELECT) { - status = gpio_request(cs, dev_name(&spi->dev)); - if (status) - return status; - status = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH); - } - } - if (!status) - status = spi_bitbang_setup(spi); - if (status) { - if (!spi->controller_state && cs != SPI_GPIO_NO_CHIPSELECT) - gpio_free(cs); - } - return status; -} - -static void spi_gpio_cleanup(struct spi_device *spi) -{ - unsigned long cs = (unsigned long) spi->controller_data; - - if (cs != SPI_GPIO_NO_CHIPSELECT) - gpio_free(cs); - spi_bitbang_cleanup(spi); -} - -static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in) -{ - int value; - - value = gpio_request(pin, label); - if (value == 0) { - if (is_in) - value = gpio_direction_input(pin); - else - value = gpio_direction_output(pin, 0); - } - return value; -} - -static int __init -spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label, - u16 *res_flags) -{ - int value; - - /* NOTE: SPI_*_GPIO symbols may reference "pdata" */ - - if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) { - value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false); - if (value) - goto done; - } else { - /* HW configuration without MOSI pin */ - *res_flags |= SPI_MASTER_NO_TX; - } - - if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) { - value = spi_gpio_alloc(SPI_MISO_GPIO, label, true); - if (value) - goto free_mosi; - } else { - /* HW configuration without MISO pin */ - *res_flags |= SPI_MASTER_NO_RX; - } - - value = spi_gpio_alloc(SPI_SCK_GPIO, label, false); - if (value) - goto free_miso; - - goto done; - -free_miso: - if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) - gpio_free(SPI_MISO_GPIO); -free_mosi: - if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) - gpio_free(SPI_MOSI_GPIO); -done: - return value; -} - -static int __init spi_gpio_probe(struct platform_device *pdev) -{ - int status; - struct spi_master *master; - struct spi_gpio *spi_gpio; - struct spi_gpio_platform_data *pdata; - u16 master_flags = 0; - - pdata = pdev->dev.platform_data; -#ifdef GENERIC_BITBANG - if (!pdata || !pdata->num_chipselect) - return -ENODEV; -#endif - - status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags); - if (status < 0) - return status; - - master = spi_alloc_master(&pdev->dev, sizeof *spi_gpio); - if (!master) { - status = -ENOMEM; - goto gpio_free; - } - spi_gpio = spi_master_get_devdata(master); - platform_set_drvdata(pdev, spi_gpio); - - spi_gpio->pdev = pdev; - if (pdata) - spi_gpio->pdata = *pdata; - - master->flags = master_flags; - master->bus_num = pdev->id; - master->num_chipselect = SPI_N_CHIPSEL; - master->setup = spi_gpio_setup; - master->cleanup = spi_gpio_cleanup; - - spi_gpio->bitbang.master = spi_master_get(master); - spi_gpio->bitbang.chipselect = spi_gpio_chipselect; - - if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) { - spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0; - spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1; - spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2; - spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3; - } else { - spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0; - spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1; - spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2; - spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3; - } - spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer; - spi_gpio->bitbang.flags = SPI_CS_HIGH; - - status = spi_bitbang_start(&spi_gpio->bitbang); - if (status < 0) { - spi_master_put(spi_gpio->bitbang.master); -gpio_free: - if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) - gpio_free(SPI_MISO_GPIO); - if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) - gpio_free(SPI_MOSI_GPIO); - gpio_free(SPI_SCK_GPIO); - spi_master_put(master); - } - - return status; -} - -static int __exit spi_gpio_remove(struct platform_device *pdev) -{ - struct spi_gpio *spi_gpio; - struct spi_gpio_platform_data *pdata; - int status; - - spi_gpio = platform_get_drvdata(pdev); - pdata = pdev->dev.platform_data; - - /* stop() unregisters child devices too */ - status = spi_bitbang_stop(&spi_gpio->bitbang); - spi_master_put(spi_gpio->bitbang.master); - - platform_set_drvdata(pdev, NULL); - - if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) - gpio_free(SPI_MISO_GPIO); - if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) - gpio_free(SPI_MOSI_GPIO); - gpio_free(SPI_SCK_GPIO); - - return status; -} - -MODULE_ALIAS("platform:" DRIVER_NAME); - -static struct platform_driver spi_gpio_driver = { - .driver.name = DRIVER_NAME, - .driver.owner = THIS_MODULE, - .remove = __exit_p(spi_gpio_remove), -}; - -static int __init spi_gpio_init(void) -{ - return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe); -} -module_init(spi_gpio_init); - -static void __exit spi_gpio_exit(void) -{ - platform_driver_unregister(&spi_gpio_driver); -} -module_exit(spi_gpio_exit); - - -MODULE_DESCRIPTION("SPI master driver using generic bitbanged GPIO "); -MODULE_AUTHOR("David Brownell"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c deleted file mode 100644 index 69d6dba67c19..000000000000 --- a/drivers/spi/spi_imx.c +++ /dev/null @@ -1,944 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 Juergen Beisert - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation - * 51 Franklin Street, Fifth Floor - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define DRIVER_NAME "spi_imx" - -#define MXC_CSPIRXDATA 0x00 -#define MXC_CSPITXDATA 0x04 -#define MXC_CSPICTRL 0x08 -#define MXC_CSPIINT 0x0c -#define MXC_RESET 0x1c - -#define MX3_CSPISTAT 0x14 -#define MX3_CSPISTAT_RR (1 << 3) - -/* generic defines to abstract from the different register layouts */ -#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */ -#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */ - -struct spi_imx_config { - unsigned int speed_hz; - unsigned int bpw; - unsigned int mode; - u8 cs; -}; - -enum spi_imx_devtype { - SPI_IMX_VER_IMX1, - SPI_IMX_VER_0_0, - SPI_IMX_VER_0_4, - SPI_IMX_VER_0_5, - SPI_IMX_VER_0_7, - SPI_IMX_VER_2_3, -}; - -struct spi_imx_data; - -struct spi_imx_devtype_data { - void (*intctrl)(struct spi_imx_data *, int); - int (*config)(struct spi_imx_data *, struct spi_imx_config *); - void (*trigger)(struct spi_imx_data *); - int (*rx_available)(struct spi_imx_data *); - void (*reset)(struct spi_imx_data *); - unsigned int fifosize; -}; - -struct spi_imx_data { - struct spi_bitbang bitbang; - - struct completion xfer_done; - void *base; - int irq; - struct clk *clk; - unsigned long spi_clk; - int *chipselect; - - unsigned int count; - void (*tx)(struct spi_imx_data *); - void (*rx)(struct spi_imx_data *); - void *rx_buf; - const void *tx_buf; - unsigned int txfifo; /* number of words pushed in tx FIFO */ - - struct spi_imx_devtype_data devtype_data; -}; - -#define MXC_SPI_BUF_RX(type) \ -static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \ -{ \ - unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA); \ - \ - if (spi_imx->rx_buf) { \ - *(type *)spi_imx->rx_buf = val; \ - spi_imx->rx_buf += sizeof(type); \ - } \ -} - -#define MXC_SPI_BUF_TX(type) \ -static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx) \ -{ \ - type val = 0; \ - \ - if (spi_imx->tx_buf) { \ - val = *(type *)spi_imx->tx_buf; \ - spi_imx->tx_buf += sizeof(type); \ - } \ - \ - spi_imx->count -= sizeof(type); \ - \ - writel(val, spi_imx->base + MXC_CSPITXDATA); \ -} - -MXC_SPI_BUF_RX(u8) -MXC_SPI_BUF_TX(u8) -MXC_SPI_BUF_RX(u16) -MXC_SPI_BUF_TX(u16) -MXC_SPI_BUF_RX(u32) -MXC_SPI_BUF_TX(u32) - -/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set - * (which is currently not the case in this driver) - */ -static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192, - 256, 384, 512, 768, 1024}; - -/* MX21, MX27 */ -static unsigned int spi_imx_clkdiv_1(unsigned int fin, - unsigned int fspi) -{ - int i, max; - - if (cpu_is_mx21()) - max = 18; - else - max = 16; - - for (i = 2; i < max; i++) - if (fspi * mxc_clkdivs[i] >= fin) - return i; - - return max; -} - -/* MX1, MX31, MX35, MX51 CSPI */ -static unsigned int spi_imx_clkdiv_2(unsigned int fin, - unsigned int fspi) -{ - int i, div = 4; - - for (i = 0; i < 7; i++) { - if (fspi * div >= fin) - return i; - div <<= 1; - } - - return 7; -} - -#define SPI_IMX2_3_CTRL 0x08 -#define SPI_IMX2_3_CTRL_ENABLE (1 << 0) -#define SPI_IMX2_3_CTRL_XCH (1 << 2) -#define SPI_IMX2_3_CTRL_MODE_MASK (0xf << 4) -#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8 -#define SPI_IMX2_3_CTRL_PREDIV_OFFSET 12 -#define SPI_IMX2_3_CTRL_CS(cs) ((cs) << 18) -#define SPI_IMX2_3_CTRL_BL_OFFSET 20 - -#define SPI_IMX2_3_CONFIG 0x0c -#define SPI_IMX2_3_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0)) -#define SPI_IMX2_3_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4)) -#define SPI_IMX2_3_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8)) -#define SPI_IMX2_3_CONFIG_SSBPOL(cs) (1 << ((cs) + 12)) - -#define SPI_IMX2_3_INT 0x10 -#define SPI_IMX2_3_INT_TEEN (1 << 0) -#define SPI_IMX2_3_INT_RREN (1 << 3) - -#define SPI_IMX2_3_STAT 0x18 -#define SPI_IMX2_3_STAT_RR (1 << 3) - -/* MX51 eCSPI */ -static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi) -{ - /* - * there are two 4-bit dividers, the pre-divider divides by - * $pre, the post-divider by 2^$post - */ - unsigned int pre, post; - - if (unlikely(fspi > fin)) - return 0; - - post = fls(fin) - fls(fspi); - if (fin > fspi << post) - post++; - - /* now we have: (fin <= fspi << post) with post being minimal */ - - post = max(4U, post) - 4; - if (unlikely(post > 0xf)) { - pr_err("%s: cannot set clock freq: %u (base freq: %u)\n", - __func__, fspi, fin); - return 0xff; - } - - pre = DIV_ROUND_UP(fin, fspi << post) - 1; - - pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n", - __func__, fin, fspi, post, pre); - return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) | - (post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET); -} - -static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable) -{ - unsigned val = 0; - - if (enable & MXC_INT_TE) - val |= SPI_IMX2_3_INT_TEEN; - - if (enable & MXC_INT_RR) - val |= SPI_IMX2_3_INT_RREN; - - writel(val, spi_imx->base + SPI_IMX2_3_INT); -} - -static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx) -{ - u32 reg; - - reg = readl(spi_imx->base + SPI_IMX2_3_CTRL); - reg |= SPI_IMX2_3_CTRL_XCH; - writel(reg, spi_imx->base + SPI_IMX2_3_CTRL); -} - -static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx, - struct spi_imx_config *config) -{ - u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0; - - /* - * The hardware seems to have a race condition when changing modes. The - * current assumption is that the selection of the channel arrives - * earlier in the hardware than the mode bits when they are written at - * the same time. - * So set master mode for all channels as we do not support slave mode. - */ - ctrl |= SPI_IMX2_3_CTRL_MODE_MASK; - - /* set clock speed */ - ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz); - - /* set chip select to use */ - ctrl |= SPI_IMX2_3_CTRL_CS(config->cs); - - ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET; - - cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs); - - if (config->mode & SPI_CPHA) - cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs); - - if (config->mode & SPI_CPOL) - cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs); - - if (config->mode & SPI_CS_HIGH) - cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs); - - writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL); - writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG); - - return 0; -} - -static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx) -{ - return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR; -} - -static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx) -{ - /* drain receive buffer */ - while (spi_imx2_3_rx_available(spi_imx)) - readl(spi_imx->base + MXC_CSPIRXDATA); -} - -#define MX31_INTREG_TEEN (1 << 0) -#define MX31_INTREG_RREN (1 << 3) - -#define MX31_CSPICTRL_ENABLE (1 << 0) -#define MX31_CSPICTRL_MASTER (1 << 1) -#define MX31_CSPICTRL_XCH (1 << 2) -#define MX31_CSPICTRL_POL (1 << 4) -#define MX31_CSPICTRL_PHA (1 << 5) -#define MX31_CSPICTRL_SSCTL (1 << 6) -#define MX31_CSPICTRL_SSPOL (1 << 7) -#define MX31_CSPICTRL_BC_SHIFT 8 -#define MX35_CSPICTRL_BL_SHIFT 20 -#define MX31_CSPICTRL_CS_SHIFT 24 -#define MX35_CSPICTRL_CS_SHIFT 12 -#define MX31_CSPICTRL_DR_SHIFT 16 - -#define MX31_CSPISTATUS 0x14 -#define MX31_STATUS_RR (1 << 3) - -/* These functions also work for the i.MX35, but be aware that - * the i.MX35 has a slightly different register layout for bits - * we do not use here. - */ -static void __maybe_unused mx31_intctrl(struct spi_imx_data *spi_imx, int enable) -{ - unsigned int val = 0; - - if (enable & MXC_INT_TE) - val |= MX31_INTREG_TEEN; - if (enable & MXC_INT_RR) - val |= MX31_INTREG_RREN; - - writel(val, spi_imx->base + MXC_CSPIINT); -} - -static void __maybe_unused mx31_trigger(struct spi_imx_data *spi_imx) -{ - unsigned int reg; - - reg = readl(spi_imx->base + MXC_CSPICTRL); - reg |= MX31_CSPICTRL_XCH; - writel(reg, spi_imx->base + MXC_CSPICTRL); -} - -static int __maybe_unused spi_imx0_4_config(struct spi_imx_data *spi_imx, - struct spi_imx_config *config) -{ - unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; - int cs = spi_imx->chipselect[config->cs]; - - reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << - MX31_CSPICTRL_DR_SHIFT; - - reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT; - - if (config->mode & SPI_CPHA) - reg |= MX31_CSPICTRL_PHA; - if (config->mode & SPI_CPOL) - reg |= MX31_CSPICTRL_POL; - if (config->mode & SPI_CS_HIGH) - reg |= MX31_CSPICTRL_SSPOL; - if (cs < 0) - reg |= (cs + 32) << MX31_CSPICTRL_CS_SHIFT; - - writel(reg, spi_imx->base + MXC_CSPICTRL); - - return 0; -} - -static int __maybe_unused spi_imx0_7_config(struct spi_imx_data *spi_imx, - struct spi_imx_config *config) -{ - unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; - int cs = spi_imx->chipselect[config->cs]; - - reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << - MX31_CSPICTRL_DR_SHIFT; - - reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT; - reg |= MX31_CSPICTRL_SSCTL; - - if (config->mode & SPI_CPHA) - reg |= MX31_CSPICTRL_PHA; - if (config->mode & SPI_CPOL) - reg |= MX31_CSPICTRL_POL; - if (config->mode & SPI_CS_HIGH) - reg |= MX31_CSPICTRL_SSPOL; - if (cs < 0) - reg |= (cs + 32) << MX35_CSPICTRL_CS_SHIFT; - - writel(reg, spi_imx->base + MXC_CSPICTRL); - - return 0; -} - -static int __maybe_unused mx31_rx_available(struct spi_imx_data *spi_imx) -{ - return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR; -} - -static void __maybe_unused spi_imx0_4_reset(struct spi_imx_data *spi_imx) -{ - /* drain receive buffer */ - while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR) - readl(spi_imx->base + MXC_CSPIRXDATA); -} - -#define MX27_INTREG_RR (1 << 4) -#define MX27_INTREG_TEEN (1 << 9) -#define MX27_INTREG_RREN (1 << 13) - -#define MX27_CSPICTRL_POL (1 << 5) -#define MX27_CSPICTRL_PHA (1 << 6) -#define MX27_CSPICTRL_SSPOL (1 << 8) -#define MX27_CSPICTRL_XCH (1 << 9) -#define MX27_CSPICTRL_ENABLE (1 << 10) -#define MX27_CSPICTRL_MASTER (1 << 11) -#define MX27_CSPICTRL_DR_SHIFT 14 -#define MX27_CSPICTRL_CS_SHIFT 19 - -static void __maybe_unused mx27_intctrl(struct spi_imx_data *spi_imx, int enable) -{ - unsigned int val = 0; - - if (enable & MXC_INT_TE) - val |= MX27_INTREG_TEEN; - if (enable & MXC_INT_RR) - val |= MX27_INTREG_RREN; - - writel(val, spi_imx->base + MXC_CSPIINT); -} - -static void __maybe_unused mx27_trigger(struct spi_imx_data *spi_imx) -{ - unsigned int reg; - - reg = readl(spi_imx->base + MXC_CSPICTRL); - reg |= MX27_CSPICTRL_XCH; - writel(reg, spi_imx->base + MXC_CSPICTRL); -} - -static int __maybe_unused mx27_config(struct spi_imx_data *spi_imx, - struct spi_imx_config *config) -{ - unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER; - int cs = spi_imx->chipselect[config->cs]; - - reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) << - MX27_CSPICTRL_DR_SHIFT; - reg |= config->bpw - 1; - - if (config->mode & SPI_CPHA) - reg |= MX27_CSPICTRL_PHA; - if (config->mode & SPI_CPOL) - reg |= MX27_CSPICTRL_POL; - if (config->mode & SPI_CS_HIGH) - reg |= MX27_CSPICTRL_SSPOL; - if (cs < 0) - reg |= (cs + 32) << MX27_CSPICTRL_CS_SHIFT; - - writel(reg, spi_imx->base + MXC_CSPICTRL); - - return 0; -} - -static int __maybe_unused mx27_rx_available(struct spi_imx_data *spi_imx) -{ - return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR; -} - -static void __maybe_unused spi_imx0_0_reset(struct spi_imx_data *spi_imx) -{ - writel(1, spi_imx->base + MXC_RESET); -} - -#define MX1_INTREG_RR (1 << 3) -#define MX1_INTREG_TEEN (1 << 8) -#define MX1_INTREG_RREN (1 << 11) - -#define MX1_CSPICTRL_POL (1 << 4) -#define MX1_CSPICTRL_PHA (1 << 5) -#define MX1_CSPICTRL_XCH (1 << 8) -#define MX1_CSPICTRL_ENABLE (1 << 9) -#define MX1_CSPICTRL_MASTER (1 << 10) -#define MX1_CSPICTRL_DR_SHIFT 13 - -static void __maybe_unused mx1_intctrl(struct spi_imx_data *spi_imx, int enable) -{ - unsigned int val = 0; - - if (enable & MXC_INT_TE) - val |= MX1_INTREG_TEEN; - if (enable & MXC_INT_RR) - val |= MX1_INTREG_RREN; - - writel(val, spi_imx->base + MXC_CSPIINT); -} - -static void __maybe_unused mx1_trigger(struct spi_imx_data *spi_imx) -{ - unsigned int reg; - - reg = readl(spi_imx->base + MXC_CSPICTRL); - reg |= MX1_CSPICTRL_XCH; - writel(reg, spi_imx->base + MXC_CSPICTRL); -} - -static int __maybe_unused mx1_config(struct spi_imx_data *spi_imx, - struct spi_imx_config *config) -{ - unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER; - - reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << - MX1_CSPICTRL_DR_SHIFT; - reg |= config->bpw - 1; - - if (config->mode & SPI_CPHA) - reg |= MX1_CSPICTRL_PHA; - if (config->mode & SPI_CPOL) - reg |= MX1_CSPICTRL_POL; - - writel(reg, spi_imx->base + MXC_CSPICTRL); - - return 0; -} - -static int __maybe_unused mx1_rx_available(struct spi_imx_data *spi_imx) -{ - return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR; -} - -static void __maybe_unused mx1_reset(struct spi_imx_data *spi_imx) -{ - writel(1, spi_imx->base + MXC_RESET); -} - -/* - * These version numbers are taken from the Freescale driver. Unfortunately it - * doesn't support i.MX1, so this entry doesn't match the scheme. :-( - */ -static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = { -#ifdef CONFIG_SPI_IMX_VER_IMX1 - [SPI_IMX_VER_IMX1] = { - .intctrl = mx1_intctrl, - .config = mx1_config, - .trigger = mx1_trigger, - .rx_available = mx1_rx_available, - .reset = mx1_reset, - .fifosize = 8, - }, -#endif -#ifdef CONFIG_SPI_IMX_VER_0_0 - [SPI_IMX_VER_0_0] = { - .intctrl = mx27_intctrl, - .config = mx27_config, - .trigger = mx27_trigger, - .rx_available = mx27_rx_available, - .reset = spi_imx0_0_reset, - .fifosize = 8, - }, -#endif -#ifdef CONFIG_SPI_IMX_VER_0_4 - [SPI_IMX_VER_0_4] = { - .intctrl = mx31_intctrl, - .config = spi_imx0_4_config, - .trigger = mx31_trigger, - .rx_available = mx31_rx_available, - .reset = spi_imx0_4_reset, - .fifosize = 8, - }, -#endif -#ifdef CONFIG_SPI_IMX_VER_0_7 - [SPI_IMX_VER_0_7] = { - .intctrl = mx31_intctrl, - .config = spi_imx0_7_config, - .trigger = mx31_trigger, - .rx_available = mx31_rx_available, - .reset = spi_imx0_4_reset, - .fifosize = 8, - }, -#endif -#ifdef CONFIG_SPI_IMX_VER_2_3 - [SPI_IMX_VER_2_3] = { - .intctrl = spi_imx2_3_intctrl, - .config = spi_imx2_3_config, - .trigger = spi_imx2_3_trigger, - .rx_available = spi_imx2_3_rx_available, - .reset = spi_imx2_3_reset, - .fifosize = 64, - }, -#endif -}; - -static void spi_imx_chipselect(struct spi_device *spi, int is_active) -{ - struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); - int gpio = spi_imx->chipselect[spi->chip_select]; - int active = is_active != BITBANG_CS_INACTIVE; - int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH); - - if (gpio < 0) - return; - - gpio_set_value(gpio, dev_is_lowactive ^ active); -} - -static void spi_imx_push(struct spi_imx_data *spi_imx) -{ - while (spi_imx->txfifo < spi_imx->devtype_data.fifosize) { - if (!spi_imx->count) - break; - spi_imx->tx(spi_imx); - spi_imx->txfifo++; - } - - spi_imx->devtype_data.trigger(spi_imx); -} - -static irqreturn_t spi_imx_isr(int irq, void *dev_id) -{ - struct spi_imx_data *spi_imx = dev_id; - - while (spi_imx->devtype_data.rx_available(spi_imx)) { - spi_imx->rx(spi_imx); - spi_imx->txfifo--; - } - - if (spi_imx->count) { - spi_imx_push(spi_imx); - return IRQ_HANDLED; - } - - if (spi_imx->txfifo) { - /* No data left to push, but still waiting for rx data, - * enable receive data available interrupt. - */ - spi_imx->devtype_data.intctrl( - spi_imx, MXC_INT_RR); - return IRQ_HANDLED; - } - - spi_imx->devtype_data.intctrl(spi_imx, 0); - complete(&spi_imx->xfer_done); - - return IRQ_HANDLED; -} - -static int spi_imx_setupxfer(struct spi_device *spi, - struct spi_transfer *t) -{ - struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); - struct spi_imx_config config; - - config.bpw = t ? t->bits_per_word : spi->bits_per_word; - config.speed_hz = t ? t->speed_hz : spi->max_speed_hz; - config.mode = spi->mode; - config.cs = spi->chip_select; - - if (!config.speed_hz) - config.speed_hz = spi->max_speed_hz; - if (!config.bpw) - config.bpw = spi->bits_per_word; - if (!config.speed_hz) - config.speed_hz = spi->max_speed_hz; - - /* Initialize the functions for transfer */ - if (config.bpw <= 8) { - spi_imx->rx = spi_imx_buf_rx_u8; - spi_imx->tx = spi_imx_buf_tx_u8; - } else if (config.bpw <= 16) { - spi_imx->rx = spi_imx_buf_rx_u16; - spi_imx->tx = spi_imx_buf_tx_u16; - } else if (config.bpw <= 32) { - spi_imx->rx = spi_imx_buf_rx_u32; - spi_imx->tx = spi_imx_buf_tx_u32; - } else - BUG(); - - spi_imx->devtype_data.config(spi_imx, &config); - - return 0; -} - -static int spi_imx_transfer(struct spi_device *spi, - struct spi_transfer *transfer) -{ - struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); - - spi_imx->tx_buf = transfer->tx_buf; - spi_imx->rx_buf = transfer->rx_buf; - spi_imx->count = transfer->len; - spi_imx->txfifo = 0; - - init_completion(&spi_imx->xfer_done); - - spi_imx_push(spi_imx); - - spi_imx->devtype_data.intctrl(spi_imx, MXC_INT_TE); - - wait_for_completion(&spi_imx->xfer_done); - - return transfer->len; -} - -static int spi_imx_setup(struct spi_device *spi) -{ - struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); - int gpio = spi_imx->chipselect[spi->chip_select]; - - dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__, - spi->mode, spi->bits_per_word, spi->max_speed_hz); - - if (gpio >= 0) - gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1); - - spi_imx_chipselect(spi, BITBANG_CS_INACTIVE); - - return 0; -} - -static void spi_imx_cleanup(struct spi_device *spi) -{ -} - -static struct platform_device_id spi_imx_devtype[] = { - { - .name = "imx1-cspi", - .driver_data = SPI_IMX_VER_IMX1, - }, { - .name = "imx21-cspi", - .driver_data = SPI_IMX_VER_0_0, - }, { - .name = "imx25-cspi", - .driver_data = SPI_IMX_VER_0_7, - }, { - .name = "imx27-cspi", - .driver_data = SPI_IMX_VER_0_0, - }, { - .name = "imx31-cspi", - .driver_data = SPI_IMX_VER_0_4, - }, { - .name = "imx35-cspi", - .driver_data = SPI_IMX_VER_0_7, - }, { - .name = "imx51-cspi", - .driver_data = SPI_IMX_VER_0_7, - }, { - .name = "imx51-ecspi", - .driver_data = SPI_IMX_VER_2_3, - }, { - .name = "imx53-cspi", - .driver_data = SPI_IMX_VER_0_7, - }, { - .name = "imx53-ecspi", - .driver_data = SPI_IMX_VER_2_3, - }, { - /* sentinel */ - } -}; - -static int __devinit spi_imx_probe(struct platform_device *pdev) -{ - struct spi_imx_master *mxc_platform_info; - struct spi_master *master; - struct spi_imx_data *spi_imx; - struct resource *res; - int i, ret; - - mxc_platform_info = dev_get_platdata(&pdev->dev); - if (!mxc_platform_info) { - dev_err(&pdev->dev, "can't get the platform data\n"); - return -EINVAL; - } - - master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data)); - if (!master) - return -ENOMEM; - - platform_set_drvdata(pdev, master); - - master->bus_num = pdev->id; - master->num_chipselect = mxc_platform_info->num_chipselect; - - spi_imx = spi_master_get_devdata(master); - spi_imx->bitbang.master = spi_master_get(master); - spi_imx->chipselect = mxc_platform_info->chipselect; - - for (i = 0; i < master->num_chipselect; i++) { - if (spi_imx->chipselect[i] < 0) - continue; - ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME); - if (ret) { - while (i > 0) { - i--; - if (spi_imx->chipselect[i] >= 0) - gpio_free(spi_imx->chipselect[i]); - } - dev_err(&pdev->dev, "can't get cs gpios\n"); - goto out_master_put; - } - } - - spi_imx->bitbang.chipselect = spi_imx_chipselect; - spi_imx->bitbang.setup_transfer = spi_imx_setupxfer; - spi_imx->bitbang.txrx_bufs = spi_imx_transfer; - spi_imx->bitbang.master->setup = spi_imx_setup; - spi_imx->bitbang.master->cleanup = spi_imx_cleanup; - spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - - init_completion(&spi_imx->xfer_done); - - spi_imx->devtype_data = - spi_imx_devtype_data[pdev->id_entry->driver_data]; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get platform resource\n"); - ret = -ENOMEM; - goto out_gpio_free; - } - - if (!request_mem_region(res->start, resource_size(res), pdev->name)) { - dev_err(&pdev->dev, "request_mem_region failed\n"); - ret = -EBUSY; - goto out_gpio_free; - } - - spi_imx->base = ioremap(res->start, resource_size(res)); - if (!spi_imx->base) { - ret = -EINVAL; - goto out_release_mem; - } - - spi_imx->irq = platform_get_irq(pdev, 0); - if (spi_imx->irq < 0) { - ret = -EINVAL; - goto out_iounmap; - } - - ret = request_irq(spi_imx->irq, spi_imx_isr, 0, DRIVER_NAME, spi_imx); - if (ret) { - dev_err(&pdev->dev, "can't get irq%d: %d\n", spi_imx->irq, ret); - goto out_iounmap; - } - - spi_imx->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(spi_imx->clk)) { - dev_err(&pdev->dev, "unable to get clock\n"); - ret = PTR_ERR(spi_imx->clk); - goto out_free_irq; - } - - clk_enable(spi_imx->clk); - spi_imx->spi_clk = clk_get_rate(spi_imx->clk); - - spi_imx->devtype_data.reset(spi_imx); - - spi_imx->devtype_data.intctrl(spi_imx, 0); - - ret = spi_bitbang_start(&spi_imx->bitbang); - if (ret) { - dev_err(&pdev->dev, "bitbang start failed with %d\n", ret); - goto out_clk_put; - } - - dev_info(&pdev->dev, "probed\n"); - - return ret; - -out_clk_put: - clk_disable(spi_imx->clk); - clk_put(spi_imx->clk); -out_free_irq: - free_irq(spi_imx->irq, spi_imx); -out_iounmap: - iounmap(spi_imx->base); -out_release_mem: - release_mem_region(res->start, resource_size(res)); -out_gpio_free: - for (i = 0; i < master->num_chipselect; i++) - if (spi_imx->chipselect[i] >= 0) - gpio_free(spi_imx->chipselect[i]); -out_master_put: - spi_master_put(master); - kfree(master); - platform_set_drvdata(pdev, NULL); - return ret; -} - -static int __devexit spi_imx_remove(struct platform_device *pdev) -{ - struct spi_master *master = platform_get_drvdata(pdev); - struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - struct spi_imx_data *spi_imx = spi_master_get_devdata(master); - int i; - - spi_bitbang_stop(&spi_imx->bitbang); - - writel(0, spi_imx->base + MXC_CSPICTRL); - clk_disable(spi_imx->clk); - clk_put(spi_imx->clk); - free_irq(spi_imx->irq, spi_imx); - iounmap(spi_imx->base); - - for (i = 0; i < master->num_chipselect; i++) - if (spi_imx->chipselect[i] >= 0) - gpio_free(spi_imx->chipselect[i]); - - spi_master_put(master); - - release_mem_region(res->start, resource_size(res)); - - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static struct platform_driver spi_imx_driver = { - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, - .id_table = spi_imx_devtype, - .probe = spi_imx_probe, - .remove = __devexit_p(spi_imx_remove), -}; - -static int __init spi_imx_init(void) -{ - return platform_driver_register(&spi_imx_driver); -} - -static void __exit spi_imx_exit(void) -{ - platform_driver_unregister(&spi_imx_driver); -} - -module_init(spi_imx_init); -module_exit(spi_imx_exit); - -MODULE_DESCRIPTION("SPI Master Controller driver"); -MODULE_AUTHOR("Sascha Hauer, Pengutronix"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_lm70llp.c b/drivers/spi/spi_lm70llp.c deleted file mode 100644 index 7746a41ab6d6..000000000000 --- a/drivers/spi/spi_lm70llp.c +++ /dev/null @@ -1,351 +0,0 @@ -/* - * spi_lm70llp.c - driver for LM70EVAL-LLP board for the LM70 sensor - * - * Copyright (C) 2006 Kaiwan N Billimoria - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - - -#include -#include - - -/* - * The LM70 communicates with a host processor using a 3-wire variant of - * the SPI/Microwire bus interface. This driver specifically supports an - * NS LM70 LLP Evaluation Board, interfacing to a PC using its parallel - * port to bitbang an SPI-parport bridge. Accordingly, this is an SPI - * master controller driver. The hwmon/lm70 driver is a "SPI protocol - * driver", layered on top of this one and usable without the lm70llp. - * - * Datasheet and Schematic: - * The LM70 is a temperature sensor chip from National Semiconductor; its - * datasheet is available at http://www.national.com/pf/LM/LM70.html - * The schematic for this particular board (the LM70EVAL-LLP) is - * available (on page 4) here: - * http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf - * - * Also see Documentation/spi/spi-lm70llp. The SPI<->parport code here is - * (heavily) based on spi-butterfly by David Brownell. - * - * The LM70 LLP connects to the PC parallel port in the following manner: - * - * Parallel LM70 LLP - * Port Direction JP2 Header - * ----------- --------- ------------ - * D0 2 - - - * D1 3 --> V+ 5 - * D2 4 --> V+ 5 - * D3 5 --> V+ 5 - * D4 6 --> V+ 5 - * D5 7 --> nCS 8 - * D6 8 --> SCLK 3 - * D7 9 --> SI/O 5 - * GND 25 - GND 7 - * Select 13 <-- SI/O 1 - * - * Note that parport pin 13 actually gets inverted by the transistor - * arrangement which lets either the parport or the LM70 drive the - * SI/SO signal (see the schematic for details). - */ - -#define DRVNAME "spi-lm70llp" - -#define lm70_INIT 0xBE -#define SIO 0x10 -#define nCS 0x20 -#define SCLK 0x40 - -/*-------------------------------------------------------------------------*/ - -struct spi_lm70llp { - struct spi_bitbang bitbang; - struct parport *port; - struct pardevice *pd; - struct spi_device *spidev_lm70; - struct spi_board_info info; - //struct device *dev; -}; - -/* REVISIT : ugly global ; provides "exclusive open" facility */ -static struct spi_lm70llp *lm70llp; - - -/*-------------------------------------------------------------------*/ - -static inline struct spi_lm70llp *spidev_to_pp(struct spi_device *spi) -{ - return spi->controller_data; -} - -/*---------------------- LM70 LLP eval board-specific inlines follow */ - -/* NOTE: we don't actually need to reread the output values, since they'll - * still be what we wrote before. Plus, going through parport builds in - * a ~1ms/operation delay; these SPI transfers could easily be faster. - */ - -static inline void deassertCS(struct spi_lm70llp *pp) -{ - u8 data = parport_read_data(pp->port); - - data &= ~0x80; /* pull D7/SI-out low while de-asserted */ - parport_write_data(pp->port, data | nCS); -} - -static inline void assertCS(struct spi_lm70llp *pp) -{ - u8 data = parport_read_data(pp->port); - - data |= 0x80; /* pull D7/SI-out high so lm70 drives SO-in */ - parport_write_data(pp->port, data & ~nCS); -} - -static inline void clkHigh(struct spi_lm70llp *pp) -{ - u8 data = parport_read_data(pp->port); - parport_write_data(pp->port, data | SCLK); -} - -static inline void clkLow(struct spi_lm70llp *pp) -{ - u8 data = parport_read_data(pp->port); - parport_write_data(pp->port, data & ~SCLK); -} - -/*------------------------- SPI-LM70-specific inlines ----------------------*/ - -static inline void spidelay(unsigned d) -{ - udelay(d); -} - -static inline void setsck(struct spi_device *s, int is_on) -{ - struct spi_lm70llp *pp = spidev_to_pp(s); - - if (is_on) - clkHigh(pp); - else - clkLow(pp); -} - -static inline void setmosi(struct spi_device *s, int is_on) -{ - /* FIXME update D7 ... this way we can put the chip - * into shutdown mode and read the manufacturer ID, - * but we can't put it back into operational mode. - */ -} - -/* - * getmiso: - * Why do we return 0 when the SIO line is high and vice-versa? - * The fact is, the lm70 eval board from NS (which this driver drives), - * is wired in just such a way : when the lm70's SIO goes high, a transistor - * switches it to low reflecting this on the parport (pin 13), and vice-versa. - */ -static inline int getmiso(struct spi_device *s) -{ - struct spi_lm70llp *pp = spidev_to_pp(s); - return ((SIO == (parport_read_status(pp->port) & SIO)) ? 0 : 1 ); -} -/*--------------------------------------------------------------------*/ - -#include "spi_bitbang_txrx.h" - -static void lm70_chipselect(struct spi_device *spi, int value) -{ - struct spi_lm70llp *pp = spidev_to_pp(spi); - - if (value) - assertCS(pp); - else - deassertCS(pp); -} - -/* - * Our actual bitbanger routine. - */ -static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); -} - -static void spi_lm70llp_attach(struct parport *p) -{ - struct pardevice *pd; - struct spi_lm70llp *pp; - struct spi_master *master; - int status; - - if (lm70llp) { - printk(KERN_WARNING - "%s: spi_lm70llp instance already loaded. Aborting.\n", - DRVNAME); - return; - } - - /* TODO: this just _assumes_ a lm70 is there ... no probe; - * the lm70 driver could verify it, reading the manf ID. - */ - - master = spi_alloc_master(p->physport->dev, sizeof *pp); - if (!master) { - status = -ENOMEM; - goto out_fail; - } - pp = spi_master_get_devdata(master); - - master->bus_num = -1; /* dynamic alloc of a bus number */ - master->num_chipselect = 1; - - /* - * SPI and bitbang hookup. - */ - pp->bitbang.master = spi_master_get(master); - pp->bitbang.chipselect = lm70_chipselect; - pp->bitbang.txrx_word[SPI_MODE_0] = lm70_txrx; - pp->bitbang.flags = SPI_3WIRE; - - /* - * Parport hookup - */ - pp->port = p; - pd = parport_register_device(p, DRVNAME, - NULL, NULL, NULL, - PARPORT_FLAG_EXCL, pp); - if (!pd) { - status = -ENOMEM; - goto out_free_master; - } - pp->pd = pd; - - status = parport_claim(pd); - if (status < 0) - goto out_parport_unreg; - - /* - * Start SPI ... - */ - status = spi_bitbang_start(&pp->bitbang); - if (status < 0) { - printk(KERN_WARNING - "%s: spi_bitbang_start failed with status %d\n", - DRVNAME, status); - goto out_off_and_release; - } - - /* - * The modalias name MUST match the device_driver name - * for the bus glue code to match and subsequently bind them. - * We are binding to the generic drivers/hwmon/lm70.c device - * driver. - */ - strcpy(pp->info.modalias, "lm70"); - pp->info.max_speed_hz = 6 * 1000 * 1000; - pp->info.chip_select = 0; - pp->info.mode = SPI_3WIRE | SPI_MODE_0; - - /* power up the chip, and let the LM70 control SI/SO */ - parport_write_data(pp->port, lm70_INIT); - - /* Enable access to our primary data structure via - * the board info's (void *)controller_data. - */ - pp->info.controller_data = pp; - pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info); - if (pp->spidev_lm70) - dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n", - dev_name(&pp->spidev_lm70->dev)); - else { - printk(KERN_WARNING "%s: spi_new_device failed\n", DRVNAME); - status = -ENODEV; - goto out_bitbang_stop; - } - pp->spidev_lm70->bits_per_word = 8; - - lm70llp = pp; - return; - -out_bitbang_stop: - spi_bitbang_stop(&pp->bitbang); -out_off_and_release: - /* power down */ - parport_write_data(pp->port, 0); - mdelay(10); - parport_release(pp->pd); -out_parport_unreg: - parport_unregister_device(pd); -out_free_master: - (void) spi_master_put(master); -out_fail: - pr_info("%s: spi_lm70llp probe fail, status %d\n", DRVNAME, status); -} - -static void spi_lm70llp_detach(struct parport *p) -{ - struct spi_lm70llp *pp; - - if (!lm70llp || lm70llp->port != p) - return; - - pp = lm70llp; - spi_bitbang_stop(&pp->bitbang); - - /* power down */ - parport_write_data(pp->port, 0); - - parport_release(pp->pd); - parport_unregister_device(pp->pd); - - (void) spi_master_put(pp->bitbang.master); - - lm70llp = NULL; -} - - -static struct parport_driver spi_lm70llp_drv = { - .name = DRVNAME, - .attach = spi_lm70llp_attach, - .detach = spi_lm70llp_detach, -}; - -static int __init init_spi_lm70llp(void) -{ - return parport_register_driver(&spi_lm70llp_drv); -} -module_init(init_spi_lm70llp); - -static void __exit cleanup_spi_lm70llp(void) -{ - parport_unregister_driver(&spi_lm70llp_drv); -} -module_exit(cleanup_spi_lm70llp); - -MODULE_AUTHOR("Kaiwan N Billimoria "); -MODULE_DESCRIPTION( - "Parport adapter for the National Semiconductor LM70 LLP eval board"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_nuc900.c b/drivers/spi/spi_nuc900.c deleted file mode 100644 index 3cd15f690f16..000000000000 --- a/drivers/spi/spi_nuc900.c +++ /dev/null @@ -1,505 +0,0 @@ -/* linux/drivers/spi/spi_nuc900.c - * - * Copyright (c) 2009 Nuvoton technology. - * Wan ZongShun - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -/* usi registers offset */ -#define USI_CNT 0x00 -#define USI_DIV 0x04 -#define USI_SSR 0x08 -#define USI_RX0 0x10 -#define USI_TX0 0x10 - -/* usi register bit */ -#define ENINT (0x01 << 17) -#define ENFLG (0x01 << 16) -#define TXNUM (0x03 << 8) -#define TXNEG (0x01 << 2) -#define RXNEG (0x01 << 1) -#define LSB (0x01 << 10) -#define SELECTLEV (0x01 << 2) -#define SELECTPOL (0x01 << 31) -#define SELECTSLAVE 0x01 -#define GOBUSY 0x01 - -struct nuc900_spi { - struct spi_bitbang bitbang; - struct completion done; - void __iomem *regs; - int irq; - int len; - int count; - const unsigned char *tx; - unsigned char *rx; - struct clk *clk; - struct resource *ioarea; - struct spi_master *master; - struct spi_device *curdev; - struct device *dev; - struct nuc900_spi_info *pdata; - spinlock_t lock; - struct resource *res; -}; - -static inline struct nuc900_spi *to_hw(struct spi_device *sdev) -{ - return spi_master_get_devdata(sdev->master); -} - -static void nuc900_slave_select(struct spi_device *spi, unsigned int ssr) -{ - struct nuc900_spi *hw = to_hw(spi); - unsigned int val; - unsigned int cs = spi->mode & SPI_CS_HIGH ? 1 : 0; - unsigned int cpol = spi->mode & SPI_CPOL ? 1 : 0; - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - - val = __raw_readl(hw->regs + USI_SSR); - - if (!cs) - val &= ~SELECTLEV; - else - val |= SELECTLEV; - - if (!ssr) - val &= ~SELECTSLAVE; - else - val |= SELECTSLAVE; - - __raw_writel(val, hw->regs + USI_SSR); - - val = __raw_readl(hw->regs + USI_CNT); - - if (!cpol) - val &= ~SELECTPOL; - else - val |= SELECTPOL; - - __raw_writel(val, hw->regs + USI_CNT); - - spin_unlock_irqrestore(&hw->lock, flags); -} - -static void nuc900_spi_chipsel(struct spi_device *spi, int value) -{ - switch (value) { - case BITBANG_CS_INACTIVE: - nuc900_slave_select(spi, 0); - break; - - case BITBANG_CS_ACTIVE: - nuc900_slave_select(spi, 1); - break; - } -} - -static void nuc900_spi_setup_txnum(struct nuc900_spi *hw, - unsigned int txnum) -{ - unsigned int val; - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - - val = __raw_readl(hw->regs + USI_CNT); - - if (!txnum) - val &= ~TXNUM; - else - val |= txnum << 0x08; - - __raw_writel(val, hw->regs + USI_CNT); - - spin_unlock_irqrestore(&hw->lock, flags); - -} - -static void nuc900_spi_setup_txbitlen(struct nuc900_spi *hw, - unsigned int txbitlen) -{ - unsigned int val; - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - - val = __raw_readl(hw->regs + USI_CNT); - - val |= (txbitlen << 0x03); - - __raw_writel(val, hw->regs + USI_CNT); - - spin_unlock_irqrestore(&hw->lock, flags); -} - -static void nuc900_spi_gobusy(struct nuc900_spi *hw) -{ - unsigned int val; - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - - val = __raw_readl(hw->regs + USI_CNT); - - val |= GOBUSY; - - __raw_writel(val, hw->regs + USI_CNT); - - spin_unlock_irqrestore(&hw->lock, flags); -} - -static int nuc900_spi_setupxfer(struct spi_device *spi, - struct spi_transfer *t) -{ - return 0; -} - -static int nuc900_spi_setup(struct spi_device *spi) -{ - return 0; -} - -static inline unsigned int hw_txbyte(struct nuc900_spi *hw, int count) -{ - return hw->tx ? hw->tx[count] : 0; -} - -static int nuc900_spi_txrx(struct spi_device *spi, struct spi_transfer *t) -{ - struct nuc900_spi *hw = to_hw(spi); - - hw->tx = t->tx_buf; - hw->rx = t->rx_buf; - hw->len = t->len; - hw->count = 0; - - __raw_writel(hw_txbyte(hw, 0x0), hw->regs + USI_TX0); - - nuc900_spi_gobusy(hw); - - wait_for_completion(&hw->done); - - return hw->count; -} - -static irqreturn_t nuc900_spi_irq(int irq, void *dev) -{ - struct nuc900_spi *hw = dev; - unsigned int status; - unsigned int count = hw->count; - - status = __raw_readl(hw->regs + USI_CNT); - __raw_writel(status, hw->regs + USI_CNT); - - if (status & ENFLG) { - hw->count++; - - if (hw->rx) - hw->rx[count] = __raw_readl(hw->regs + USI_RX0); - count++; - - if (count < hw->len) { - __raw_writel(hw_txbyte(hw, count), hw->regs + USI_TX0); - nuc900_spi_gobusy(hw); - } else { - complete(&hw->done); - } - - return IRQ_HANDLED; - } - - complete(&hw->done); - return IRQ_HANDLED; -} - -static void nuc900_tx_edge(struct nuc900_spi *hw, unsigned int edge) -{ - unsigned int val; - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - - val = __raw_readl(hw->regs + USI_CNT); - - if (edge) - val |= TXNEG; - else - val &= ~TXNEG; - __raw_writel(val, hw->regs + USI_CNT); - - spin_unlock_irqrestore(&hw->lock, flags); -} - -static void nuc900_rx_edge(struct nuc900_spi *hw, unsigned int edge) -{ - unsigned int val; - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - - val = __raw_readl(hw->regs + USI_CNT); - - if (edge) - val |= RXNEG; - else - val &= ~RXNEG; - __raw_writel(val, hw->regs + USI_CNT); - - spin_unlock_irqrestore(&hw->lock, flags); -} - -static void nuc900_send_first(struct nuc900_spi *hw, unsigned int lsb) -{ - unsigned int val; - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - - val = __raw_readl(hw->regs + USI_CNT); - - if (lsb) - val |= LSB; - else - val &= ~LSB; - __raw_writel(val, hw->regs + USI_CNT); - - spin_unlock_irqrestore(&hw->lock, flags); -} - -static void nuc900_set_sleep(struct nuc900_spi *hw, unsigned int sleep) -{ - unsigned int val; - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - - val = __raw_readl(hw->regs + USI_CNT); - - if (sleep) - val |= (sleep << 12); - else - val &= ~(0x0f << 12); - __raw_writel(val, hw->regs + USI_CNT); - - spin_unlock_irqrestore(&hw->lock, flags); -} - -static void nuc900_enable_int(struct nuc900_spi *hw) -{ - unsigned int val; - unsigned long flags; - - spin_lock_irqsave(&hw->lock, flags); - - val = __raw_readl(hw->regs + USI_CNT); - - val |= ENINT; - - __raw_writel(val, hw->regs + USI_CNT); - - spin_unlock_irqrestore(&hw->lock, flags); -} - -static void nuc900_set_divider(struct nuc900_spi *hw) -{ - __raw_writel(hw->pdata->divider, hw->regs + USI_DIV); -} - -static void nuc900_init_spi(struct nuc900_spi *hw) -{ - clk_enable(hw->clk); - spin_lock_init(&hw->lock); - - nuc900_tx_edge(hw, hw->pdata->txneg); - nuc900_rx_edge(hw, hw->pdata->rxneg); - nuc900_send_first(hw, hw->pdata->lsb); - nuc900_set_sleep(hw, hw->pdata->sleep); - nuc900_spi_setup_txbitlen(hw, hw->pdata->txbitlen); - nuc900_spi_setup_txnum(hw, hw->pdata->txnum); - nuc900_set_divider(hw); - nuc900_enable_int(hw); -} - -static int __devinit nuc900_spi_probe(struct platform_device *pdev) -{ - struct nuc900_spi *hw; - struct spi_master *master; - int err = 0; - - master = spi_alloc_master(&pdev->dev, sizeof(struct nuc900_spi)); - if (master == NULL) { - dev_err(&pdev->dev, "No memory for spi_master\n"); - err = -ENOMEM; - goto err_nomem; - } - - hw = spi_master_get_devdata(master); - memset(hw, 0, sizeof(struct nuc900_spi)); - - hw->master = spi_master_get(master); - hw->pdata = pdev->dev.platform_data; - hw->dev = &pdev->dev; - - if (hw->pdata == NULL) { - dev_err(&pdev->dev, "No platform data supplied\n"); - err = -ENOENT; - goto err_pdata; - } - - platform_set_drvdata(pdev, hw); - init_completion(&hw->done); - - master->mode_bits = SPI_MODE_0; - master->num_chipselect = hw->pdata->num_cs; - master->bus_num = hw->pdata->bus_num; - hw->bitbang.master = hw->master; - hw->bitbang.setup_transfer = nuc900_spi_setupxfer; - hw->bitbang.chipselect = nuc900_spi_chipsel; - hw->bitbang.txrx_bufs = nuc900_spi_txrx; - hw->bitbang.master->setup = nuc900_spi_setup; - - hw->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (hw->res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - err = -ENOENT; - goto err_pdata; - } - - hw->ioarea = request_mem_region(hw->res->start, - resource_size(hw->res), pdev->name); - - if (hw->ioarea == NULL) { - dev_err(&pdev->dev, "Cannot reserve region\n"); - err = -ENXIO; - goto err_pdata; - } - - hw->regs = ioremap(hw->res->start, resource_size(hw->res)); - if (hw->regs == NULL) { - dev_err(&pdev->dev, "Cannot map IO\n"); - err = -ENXIO; - goto err_iomap; - } - - hw->irq = platform_get_irq(pdev, 0); - if (hw->irq < 0) { - dev_err(&pdev->dev, "No IRQ specified\n"); - err = -ENOENT; - goto err_irq; - } - - err = request_irq(hw->irq, nuc900_spi_irq, 0, pdev->name, hw); - if (err) { - dev_err(&pdev->dev, "Cannot claim IRQ\n"); - goto err_irq; - } - - hw->clk = clk_get(&pdev->dev, "spi"); - if (IS_ERR(hw->clk)) { - dev_err(&pdev->dev, "No clock for device\n"); - err = PTR_ERR(hw->clk); - goto err_clk; - } - - mfp_set_groupg(&pdev->dev); - nuc900_init_spi(hw); - - err = spi_bitbang_start(&hw->bitbang); - if (err) { - dev_err(&pdev->dev, "Failed to register SPI master\n"); - goto err_register; - } - - return 0; - -err_register: - clk_disable(hw->clk); - clk_put(hw->clk); -err_clk: - free_irq(hw->irq, hw); -err_irq: - iounmap(hw->regs); -err_iomap: - release_mem_region(hw->res->start, resource_size(hw->res)); - kfree(hw->ioarea); -err_pdata: - spi_master_put(hw->master); - -err_nomem: - return err; -} - -static int __devexit nuc900_spi_remove(struct platform_device *dev) -{ - struct nuc900_spi *hw = platform_get_drvdata(dev); - - free_irq(hw->irq, hw); - - platform_set_drvdata(dev, NULL); - - spi_bitbang_stop(&hw->bitbang); - - clk_disable(hw->clk); - clk_put(hw->clk); - - iounmap(hw->regs); - - release_mem_region(hw->res->start, resource_size(hw->res)); - kfree(hw->ioarea); - - spi_master_put(hw->master); - return 0; -} - -static struct platform_driver nuc900_spi_driver = { - .probe = nuc900_spi_probe, - .remove = __devexit_p(nuc900_spi_remove), - .driver = { - .name = "nuc900-spi", - .owner = THIS_MODULE, - }, -}; - -static int __init nuc900_spi_init(void) -{ - return platform_driver_register(&nuc900_spi_driver); -} - -static void __exit nuc900_spi_exit(void) -{ - platform_driver_unregister(&nuc900_spi_driver); -} - -module_init(nuc900_spi_init); -module_exit(nuc900_spi_exit); - -MODULE_AUTHOR("Wan ZongShun "); -MODULE_DESCRIPTION("nuc900 spi driver!"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:nuc900-spi"); diff --git a/drivers/spi/spi_oc_tiny.c b/drivers/spi/spi_oc_tiny.c deleted file mode 100644 index f1bde66cea19..000000000000 --- a/drivers/spi/spi_oc_tiny.c +++ /dev/null @@ -1,425 +0,0 @@ -/* - * OpenCores tiny SPI master driver - * - * http://opencores.org/project,tiny_spi - * - * Copyright (C) 2011 Thomas Chou - * - * Based on spi_s3c24xx.c, which is: - * Copyright (c) 2006 Ben Dooks - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "spi_oc_tiny" - -#define TINY_SPI_RXDATA 0 -#define TINY_SPI_TXDATA 4 -#define TINY_SPI_STATUS 8 -#define TINY_SPI_CONTROL 12 -#define TINY_SPI_BAUD 16 - -#define TINY_SPI_STATUS_TXE 0x1 -#define TINY_SPI_STATUS_TXR 0x2 - -struct tiny_spi { - /* bitbang has to be first */ - struct spi_bitbang bitbang; - struct completion done; - - void __iomem *base; - int irq; - unsigned int freq; - unsigned int baudwidth; - unsigned int baud; - unsigned int speed_hz; - unsigned int mode; - unsigned int len; - unsigned int txc, rxc; - const u8 *txp; - u8 *rxp; - unsigned int gpio_cs_count; - int *gpio_cs; -}; - -static inline struct tiny_spi *tiny_spi_to_hw(struct spi_device *sdev) -{ - return spi_master_get_devdata(sdev->master); -} - -static unsigned int tiny_spi_baud(struct spi_device *spi, unsigned int hz) -{ - struct tiny_spi *hw = tiny_spi_to_hw(spi); - - return min(DIV_ROUND_UP(hw->freq, hz * 2), (1U << hw->baudwidth)) - 1; -} - -static void tiny_spi_chipselect(struct spi_device *spi, int is_active) -{ - struct tiny_spi *hw = tiny_spi_to_hw(spi); - - if (hw->gpio_cs_count) { - gpio_set_value(hw->gpio_cs[spi->chip_select], - (spi->mode & SPI_CS_HIGH) ? is_active : !is_active); - } -} - -static int tiny_spi_setup_transfer(struct spi_device *spi, - struct spi_transfer *t) -{ - struct tiny_spi *hw = tiny_spi_to_hw(spi); - unsigned int baud = hw->baud; - - if (t) { - if (t->speed_hz && t->speed_hz != hw->speed_hz) - baud = tiny_spi_baud(spi, t->speed_hz); - } - writel(baud, hw->base + TINY_SPI_BAUD); - writel(hw->mode, hw->base + TINY_SPI_CONTROL); - return 0; -} - -static int tiny_spi_setup(struct spi_device *spi) -{ - struct tiny_spi *hw = tiny_spi_to_hw(spi); - - if (spi->max_speed_hz != hw->speed_hz) { - hw->speed_hz = spi->max_speed_hz; - hw->baud = tiny_spi_baud(spi, hw->speed_hz); - } - hw->mode = spi->mode & (SPI_CPOL | SPI_CPHA); - return 0; -} - -static inline void tiny_spi_wait_txr(struct tiny_spi *hw) -{ - while (!(readb(hw->base + TINY_SPI_STATUS) & - TINY_SPI_STATUS_TXR)) - cpu_relax(); -} - -static inline void tiny_spi_wait_txe(struct tiny_spi *hw) -{ - while (!(readb(hw->base + TINY_SPI_STATUS) & - TINY_SPI_STATUS_TXE)) - cpu_relax(); -} - -static int tiny_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) -{ - struct tiny_spi *hw = tiny_spi_to_hw(spi); - const u8 *txp = t->tx_buf; - u8 *rxp = t->rx_buf; - unsigned int i; - - if (hw->irq >= 0) { - /* use intrrupt driven data transfer */ - hw->len = t->len; - hw->txp = t->tx_buf; - hw->rxp = t->rx_buf; - hw->txc = 0; - hw->rxc = 0; - - /* send the first byte */ - if (t->len > 1) { - writeb(hw->txp ? *hw->txp++ : 0, - hw->base + TINY_SPI_TXDATA); - hw->txc++; - writeb(hw->txp ? *hw->txp++ : 0, - hw->base + TINY_SPI_TXDATA); - hw->txc++; - writeb(TINY_SPI_STATUS_TXR, hw->base + TINY_SPI_STATUS); - } else { - writeb(hw->txp ? *hw->txp++ : 0, - hw->base + TINY_SPI_TXDATA); - hw->txc++; - writeb(TINY_SPI_STATUS_TXE, hw->base + TINY_SPI_STATUS); - } - - wait_for_completion(&hw->done); - } else if (txp && rxp) { - /* we need to tighten the transfer loop */ - writeb(*txp++, hw->base + TINY_SPI_TXDATA); - if (t->len > 1) { - writeb(*txp++, hw->base + TINY_SPI_TXDATA); - for (i = 2; i < t->len; i++) { - u8 rx, tx = *txp++; - tiny_spi_wait_txr(hw); - rx = readb(hw->base + TINY_SPI_TXDATA); - writeb(tx, hw->base + TINY_SPI_TXDATA); - *rxp++ = rx; - } - tiny_spi_wait_txr(hw); - *rxp++ = readb(hw->base + TINY_SPI_TXDATA); - } - tiny_spi_wait_txe(hw); - *rxp++ = readb(hw->base + TINY_SPI_RXDATA); - } else if (rxp) { - writeb(0, hw->base + TINY_SPI_TXDATA); - if (t->len > 1) { - writeb(0, - hw->base + TINY_SPI_TXDATA); - for (i = 2; i < t->len; i++) { - u8 rx; - tiny_spi_wait_txr(hw); - rx = readb(hw->base + TINY_SPI_TXDATA); - writeb(0, hw->base + TINY_SPI_TXDATA); - *rxp++ = rx; - } - tiny_spi_wait_txr(hw); - *rxp++ = readb(hw->base + TINY_SPI_TXDATA); - } - tiny_spi_wait_txe(hw); - *rxp++ = readb(hw->base + TINY_SPI_RXDATA); - } else if (txp) { - writeb(*txp++, hw->base + TINY_SPI_TXDATA); - if (t->len > 1) { - writeb(*txp++, hw->base + TINY_SPI_TXDATA); - for (i = 2; i < t->len; i++) { - u8 tx = *txp++; - tiny_spi_wait_txr(hw); - writeb(tx, hw->base + TINY_SPI_TXDATA); - } - } - tiny_spi_wait_txe(hw); - } else { - writeb(0, hw->base + TINY_SPI_TXDATA); - if (t->len > 1) { - writeb(0, hw->base + TINY_SPI_TXDATA); - for (i = 2; i < t->len; i++) { - tiny_spi_wait_txr(hw); - writeb(0, hw->base + TINY_SPI_TXDATA); - } - } - tiny_spi_wait_txe(hw); - } - return t->len; -} - -static irqreturn_t tiny_spi_irq(int irq, void *dev) -{ - struct tiny_spi *hw = dev; - - writeb(0, hw->base + TINY_SPI_STATUS); - if (hw->rxc + 1 == hw->len) { - if (hw->rxp) - *hw->rxp++ = readb(hw->base + TINY_SPI_RXDATA); - hw->rxc++; - complete(&hw->done); - } else { - if (hw->rxp) - *hw->rxp++ = readb(hw->base + TINY_SPI_TXDATA); - hw->rxc++; - if (hw->txc < hw->len) { - writeb(hw->txp ? *hw->txp++ : 0, - hw->base + TINY_SPI_TXDATA); - hw->txc++; - writeb(TINY_SPI_STATUS_TXR, - hw->base + TINY_SPI_STATUS); - } else { - writeb(TINY_SPI_STATUS_TXE, - hw->base + TINY_SPI_STATUS); - } - } - return IRQ_HANDLED; -} - -#ifdef CONFIG_OF -#include - -static int __devinit tiny_spi_of_probe(struct platform_device *pdev) -{ - struct tiny_spi *hw = platform_get_drvdata(pdev); - struct device_node *np = pdev->dev.of_node; - unsigned int i; - const __be32 *val; - int len; - - if (!np) - return 0; - hw->gpio_cs_count = of_gpio_count(np); - if (hw->gpio_cs_count) { - hw->gpio_cs = devm_kzalloc(&pdev->dev, - hw->gpio_cs_count * sizeof(unsigned int), - GFP_KERNEL); - if (!hw->gpio_cs) - return -ENOMEM; - } - for (i = 0; i < hw->gpio_cs_count; i++) { - hw->gpio_cs[i] = of_get_gpio_flags(np, i, NULL); - if (hw->gpio_cs[i] < 0) - return -ENODEV; - } - hw->bitbang.master->dev.of_node = pdev->dev.of_node; - val = of_get_property(pdev->dev.of_node, - "clock-frequency", &len); - if (val && len >= sizeof(__be32)) - hw->freq = be32_to_cpup(val); - val = of_get_property(pdev->dev.of_node, "baud-width", &len); - if (val && len >= sizeof(__be32)) - hw->baudwidth = be32_to_cpup(val); - return 0; -} -#else /* !CONFIG_OF */ -static int __devinit tiny_spi_of_probe(struct platform_device *pdev) -{ - return 0; -} -#endif /* CONFIG_OF */ - -static int __devinit tiny_spi_probe(struct platform_device *pdev) -{ - struct tiny_spi_platform_data *platp = pdev->dev.platform_data; - struct tiny_spi *hw; - struct spi_master *master; - struct resource *res; - unsigned int i; - int err = -ENODEV; - - master = spi_alloc_master(&pdev->dev, sizeof(struct tiny_spi)); - if (!master) - return err; - - /* setup the master state. */ - master->bus_num = pdev->id; - master->num_chipselect = 255; - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - master->setup = tiny_spi_setup; - - hw = spi_master_get_devdata(master); - platform_set_drvdata(pdev, hw); - - /* setup the state for the bitbang driver */ - hw->bitbang.master = spi_master_get(master); - if (!hw->bitbang.master) - return err; - hw->bitbang.setup_transfer = tiny_spi_setup_transfer; - hw->bitbang.chipselect = tiny_spi_chipselect; - hw->bitbang.txrx_bufs = tiny_spi_txrx_bufs; - - /* find and map our resources */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - goto exit_busy; - if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), - pdev->name)) - goto exit_busy; - hw->base = devm_ioremap_nocache(&pdev->dev, res->start, - resource_size(res)); - if (!hw->base) - goto exit_busy; - /* irq is optional */ - hw->irq = platform_get_irq(pdev, 0); - if (hw->irq >= 0) { - init_completion(&hw->done); - err = devm_request_irq(&pdev->dev, hw->irq, tiny_spi_irq, 0, - pdev->name, hw); - if (err) - goto exit; - } - /* find platform data */ - if (platp) { - hw->gpio_cs_count = platp->gpio_cs_count; - hw->gpio_cs = platp->gpio_cs; - if (platp->gpio_cs_count && !platp->gpio_cs) - goto exit_busy; - hw->freq = platp->freq; - hw->baudwidth = platp->baudwidth; - } else { - err = tiny_spi_of_probe(pdev); - if (err) - goto exit; - } - for (i = 0; i < hw->gpio_cs_count; i++) { - err = gpio_request(hw->gpio_cs[i], dev_name(&pdev->dev)); - if (err) - goto exit_gpio; - gpio_direction_output(hw->gpio_cs[i], 1); - } - hw->bitbang.master->num_chipselect = max(1U, hw->gpio_cs_count); - - /* register our spi controller */ - err = spi_bitbang_start(&hw->bitbang); - if (err) - goto exit; - dev_info(&pdev->dev, "base %p, irq %d\n", hw->base, hw->irq); - - return 0; - -exit_gpio: - while (i-- > 0) - gpio_free(hw->gpio_cs[i]); -exit_busy: - err = -EBUSY; -exit: - platform_set_drvdata(pdev, NULL); - spi_master_put(master); - return err; -} - -static int __devexit tiny_spi_remove(struct platform_device *pdev) -{ - struct tiny_spi *hw = platform_get_drvdata(pdev); - struct spi_master *master = hw->bitbang.master; - unsigned int i; - - spi_bitbang_stop(&hw->bitbang); - for (i = 0; i < hw->gpio_cs_count; i++) - gpio_free(hw->gpio_cs[i]); - platform_set_drvdata(pdev, NULL); - spi_master_put(master); - return 0; -} - -#ifdef CONFIG_OF -static const struct of_device_id tiny_spi_match[] = { - { .compatible = "opencores,tiny-spi-rtlsvn2", }, - {}, -}; -MODULE_DEVICE_TABLE(of, tiny_spi_match); -#else /* CONFIG_OF */ -#define tiny_spi_match NULL -#endif /* CONFIG_OF */ - -static struct platform_driver tiny_spi_driver = { - .probe = tiny_spi_probe, - .remove = __devexit_p(tiny_spi_remove), - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - .pm = NULL, - .of_match_table = tiny_spi_match, - }, -}; - -static int __init tiny_spi_init(void) -{ - return platform_driver_register(&tiny_spi_driver); -} -module_init(tiny_spi_init); - -static void __exit tiny_spi_exit(void) -{ - platform_driver_unregister(&tiny_spi_driver); -} -module_exit(tiny_spi_exit); - -MODULE_DESCRIPTION("OpenCores tiny SPI driver"); -MODULE_AUTHOR("Thomas Chou "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/spi/spi_ppc4xx.c b/drivers/spi/spi_ppc4xx.c deleted file mode 100644 index 2a298c029194..000000000000 --- a/drivers/spi/spi_ppc4xx.c +++ /dev/null @@ -1,612 +0,0 @@ -/* - * SPI_PPC4XX SPI controller driver. - * - * Copyright (C) 2007 Gary Jennejohn - * Copyright 2008 Stefan Roese , DENX Software Engineering - * Copyright 2009 Harris Corporation, Steven A. Falco - * - * Based in part on drivers/spi/spi_s3c24xx.c - * - * Copyright (c) 2006 Ben Dooks - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -/* - * The PPC4xx SPI controller has no FIFO so each sent/received byte will - * generate an interrupt to the CPU. This can cause high CPU utilization. - * This driver allows platforms to reduce the interrupt load on the CPU - * during SPI transfers by setting max_speed_hz via the device tree. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -/* bits in mode register - bit 0 is MSb */ - -/* - * SPI_PPC4XX_MODE_SCP = 0 means "data latched on trailing edge of clock" - * SPI_PPC4XX_MODE_SCP = 1 means "data latched on leading edge of clock" - * Note: This is the inverse of CPHA. - */ -#define SPI_PPC4XX_MODE_SCP (0x80 >> 3) - -/* SPI_PPC4XX_MODE_SPE = 1 means "port enabled" */ -#define SPI_PPC4XX_MODE_SPE (0x80 >> 4) - -/* - * SPI_PPC4XX_MODE_RD = 0 means "MSB first" - this is the normal mode - * SPI_PPC4XX_MODE_RD = 1 means "LSB first" - this is bit-reversed mode - * Note: This is identical to SPI_LSB_FIRST. - */ -#define SPI_PPC4XX_MODE_RD (0x80 >> 5) - -/* - * SPI_PPC4XX_MODE_CI = 0 means "clock idles low" - * SPI_PPC4XX_MODE_CI = 1 means "clock idles high" - * Note: This is identical to CPOL. - */ -#define SPI_PPC4XX_MODE_CI (0x80 >> 6) - -/* - * SPI_PPC4XX_MODE_IL = 0 means "loopback disable" - * SPI_PPC4XX_MODE_IL = 1 means "loopback enable" - */ -#define SPI_PPC4XX_MODE_IL (0x80 >> 7) - -/* bits in control register */ -/* starts a transfer when set */ -#define SPI_PPC4XX_CR_STR (0x80 >> 7) - -/* bits in status register */ -/* port is busy with a transfer */ -#define SPI_PPC4XX_SR_BSY (0x80 >> 6) -/* RxD ready */ -#define SPI_PPC4XX_SR_RBR (0x80 >> 7) - -/* clock settings (SCP and CI) for various SPI modes */ -#define SPI_CLK_MODE0 (SPI_PPC4XX_MODE_SCP | 0) -#define SPI_CLK_MODE1 (0 | 0) -#define SPI_CLK_MODE2 (SPI_PPC4XX_MODE_SCP | SPI_PPC4XX_MODE_CI) -#define SPI_CLK_MODE3 (0 | SPI_PPC4XX_MODE_CI) - -#define DRIVER_NAME "spi_ppc4xx_of" - -struct spi_ppc4xx_regs { - u8 mode; - u8 rxd; - u8 txd; - u8 cr; - u8 sr; - u8 dummy; - /* - * Clock divisor modulus register - * This uses the follwing formula: - * SCPClkOut = OPBCLK/(4(CDM + 1)) - * or - * CDM = (OPBCLK/4*SCPClkOut) - 1 - * bit 0 is the MSb! - */ - u8 cdm; -}; - -/* SPI Controller driver's private data. */ -struct ppc4xx_spi { - /* bitbang has to be first */ - struct spi_bitbang bitbang; - struct completion done; - - u64 mapbase; - u64 mapsize; - int irqnum; - /* need this to set the SPI clock */ - unsigned int opb_freq; - - /* for transfers */ - int len; - int count; - /* data buffers */ - const unsigned char *tx; - unsigned char *rx; - - int *gpios; - - struct spi_ppc4xx_regs __iomem *regs; /* pointer to the registers */ - struct spi_master *master; - struct device *dev; -}; - -/* need this so we can set the clock in the chipselect routine */ -struct spi_ppc4xx_cs { - u8 mode; -}; - -static int spi_ppc4xx_txrx(struct spi_device *spi, struct spi_transfer *t) -{ - struct ppc4xx_spi *hw; - u8 data; - - dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", - t->tx_buf, t->rx_buf, t->len); - - hw = spi_master_get_devdata(spi->master); - - hw->tx = t->tx_buf; - hw->rx = t->rx_buf; - hw->len = t->len; - hw->count = 0; - - /* send the first byte */ - data = hw->tx ? hw->tx[0] : 0; - out_8(&hw->regs->txd, data); - out_8(&hw->regs->cr, SPI_PPC4XX_CR_STR); - wait_for_completion(&hw->done); - - return hw->count; -} - -static int spi_ppc4xx_setupxfer(struct spi_device *spi, struct spi_transfer *t) -{ - struct ppc4xx_spi *hw = spi_master_get_devdata(spi->master); - struct spi_ppc4xx_cs *cs = spi->controller_state; - int scr; - u8 cdm = 0; - u32 speed; - u8 bits_per_word; - - /* Start with the generic configuration for this device. */ - bits_per_word = spi->bits_per_word; - speed = spi->max_speed_hz; - - /* - * Modify the configuration if the transfer overrides it. Do not allow - * the transfer to overwrite the generic configuration with zeros. - */ - if (t) { - if (t->bits_per_word) - bits_per_word = t->bits_per_word; - - if (t->speed_hz) - speed = min(t->speed_hz, spi->max_speed_hz); - } - - if (bits_per_word != 8) { - dev_err(&spi->dev, "invalid bits-per-word (%d)\n", - bits_per_word); - return -EINVAL; - } - - if (!speed || (speed > spi->max_speed_hz)) { - dev_err(&spi->dev, "invalid speed_hz (%d)\n", speed); - return -EINVAL; - } - - /* Write new configration */ - out_8(&hw->regs->mode, cs->mode); - - /* Set the clock */ - /* opb_freq was already divided by 4 */ - scr = (hw->opb_freq / speed) - 1; - if (scr > 0) - cdm = min(scr, 0xff); - - dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", cdm, speed); - - if (in_8(&hw->regs->cdm) != cdm) - out_8(&hw->regs->cdm, cdm); - - spin_lock(&hw->bitbang.lock); - if (!hw->bitbang.busy) { - hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE); - /* Need to ndelay here? */ - } - spin_unlock(&hw->bitbang.lock); - - return 0; -} - -static int spi_ppc4xx_setup(struct spi_device *spi) -{ - struct spi_ppc4xx_cs *cs = spi->controller_state; - - if (spi->bits_per_word != 8) { - dev_err(&spi->dev, "invalid bits-per-word (%d)\n", - spi->bits_per_word); - return -EINVAL; - } - - if (!spi->max_speed_hz) { - dev_err(&spi->dev, "invalid max_speed_hz (must be non-zero)\n"); - return -EINVAL; - } - - if (cs == NULL) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); - if (!cs) - return -ENOMEM; - spi->controller_state = cs; - } - - /* - * We set all bits of the SPI0_MODE register, so, - * no need to read-modify-write - */ - cs->mode = SPI_PPC4XX_MODE_SPE; - - switch (spi->mode & (SPI_CPHA | SPI_CPOL)) { - case SPI_MODE_0: - cs->mode |= SPI_CLK_MODE0; - break; - case SPI_MODE_1: - cs->mode |= SPI_CLK_MODE1; - break; - case SPI_MODE_2: - cs->mode |= SPI_CLK_MODE2; - break; - case SPI_MODE_3: - cs->mode |= SPI_CLK_MODE3; - break; - } - - if (spi->mode & SPI_LSB_FIRST) - cs->mode |= SPI_PPC4XX_MODE_RD; - - return 0; -} - -static void spi_ppc4xx_chipsel(struct spi_device *spi, int value) -{ - struct ppc4xx_spi *hw = spi_master_get_devdata(spi->master); - unsigned int cs = spi->chip_select; - unsigned int cspol; - - /* - * If there are no chip selects at all, or if this is the special - * case of a non-existent (dummy) chip select, do nothing. - */ - - if (!hw->master->num_chipselect || hw->gpios[cs] == -EEXIST) - return; - - cspol = spi->mode & SPI_CS_HIGH ? 1 : 0; - if (value == BITBANG_CS_INACTIVE) - cspol = !cspol; - - gpio_set_value(hw->gpios[cs], cspol); -} - -static irqreturn_t spi_ppc4xx_int(int irq, void *dev_id) -{ - struct ppc4xx_spi *hw; - u8 status; - u8 data; - unsigned int count; - - hw = (struct ppc4xx_spi *)dev_id; - - status = in_8(&hw->regs->sr); - if (!status) - return IRQ_NONE; - - /* - * BSY de-asserts one cycle after the transfer is complete. The - * interrupt is asserted after the transfer is complete. The exact - * relationship is not documented, hence this code. - */ - - if (unlikely(status & SPI_PPC4XX_SR_BSY)) { - u8 lstatus; - int cnt = 0; - - dev_dbg(hw->dev, "got interrupt but spi still busy?\n"); - do { - ndelay(10); - lstatus = in_8(&hw->regs->sr); - } while (++cnt < 100 && lstatus & SPI_PPC4XX_SR_BSY); - - if (cnt >= 100) { - dev_err(hw->dev, "busywait: too many loops!\n"); - complete(&hw->done); - return IRQ_HANDLED; - } else { - /* status is always 1 (RBR) here */ - status = in_8(&hw->regs->sr); - dev_dbg(hw->dev, "loops %d status %x\n", cnt, status); - } - } - - count = hw->count; - hw->count++; - - /* RBR triggered this interrupt. Therefore, data must be ready. */ - data = in_8(&hw->regs->rxd); - if (hw->rx) - hw->rx[count] = data; - - count++; - - if (count < hw->len) { - data = hw->tx ? hw->tx[count] : 0; - out_8(&hw->regs->txd, data); - out_8(&hw->regs->cr, SPI_PPC4XX_CR_STR); - } else { - complete(&hw->done); - } - - return IRQ_HANDLED; -} - -static void spi_ppc4xx_cleanup(struct spi_device *spi) -{ - kfree(spi->controller_state); -} - -static void spi_ppc4xx_enable(struct ppc4xx_spi *hw) -{ - /* - * On all 4xx PPC's the SPI bus is shared/multiplexed with - * the 2nd I2C bus. We need to enable the the SPI bus before - * using it. - */ - - /* need to clear bit 14 to enable SPC */ - dcri_clrset(SDR0, SDR0_PFC1, 0x80000000 >> 14, 0); -} - -static void free_gpios(struct ppc4xx_spi *hw) -{ - if (hw->master->num_chipselect) { - int i; - for (i = 0; i < hw->master->num_chipselect; i++) - if (gpio_is_valid(hw->gpios[i])) - gpio_free(hw->gpios[i]); - - kfree(hw->gpios); - hw->gpios = NULL; - } -} - -/* - * platform_device layer stuff... - */ -static int __init spi_ppc4xx_of_probe(struct platform_device *op) -{ - struct ppc4xx_spi *hw; - struct spi_master *master; - struct spi_bitbang *bbp; - struct resource resource; - struct device_node *np = op->dev.of_node; - struct device *dev = &op->dev; - struct device_node *opbnp; - int ret; - int num_gpios; - const unsigned int *clk; - - master = spi_alloc_master(dev, sizeof *hw); - if (master == NULL) - return -ENOMEM; - master->dev.of_node = np; - dev_set_drvdata(dev, master); - hw = spi_master_get_devdata(master); - hw->master = spi_master_get(master); - hw->dev = dev; - - init_completion(&hw->done); - - /* - * A count of zero implies a single SPI device without any chip-select. - * Note that of_gpio_count counts all gpios assigned to this spi master. - * This includes both "null" gpio's and real ones. - */ - num_gpios = of_gpio_count(np); - if (num_gpios) { - int i; - - hw->gpios = kzalloc(sizeof(int) * num_gpios, GFP_KERNEL); - if (!hw->gpios) { - ret = -ENOMEM; - goto free_master; - } - - for (i = 0; i < num_gpios; i++) { - int gpio; - enum of_gpio_flags flags; - - gpio = of_get_gpio_flags(np, i, &flags); - hw->gpios[i] = gpio; - - if (gpio_is_valid(gpio)) { - /* Real CS - set the initial state. */ - ret = gpio_request(gpio, np->name); - if (ret < 0) { - dev_err(dev, "can't request gpio " - "#%d: %d\n", i, ret); - goto free_gpios; - } - - gpio_direction_output(gpio, - !!(flags & OF_GPIO_ACTIVE_LOW)); - } else if (gpio == -EEXIST) { - ; /* No CS, but that's OK. */ - } else { - dev_err(dev, "invalid gpio #%d: %d\n", i, gpio); - ret = -EINVAL; - goto free_gpios; - } - } - } - - /* Setup the state for the bitbang driver */ - bbp = &hw->bitbang; - bbp->master = hw->master; - bbp->setup_transfer = spi_ppc4xx_setupxfer; - bbp->chipselect = spi_ppc4xx_chipsel; - bbp->txrx_bufs = spi_ppc4xx_txrx; - bbp->use_dma = 0; - bbp->master->setup = spi_ppc4xx_setup; - bbp->master->cleanup = spi_ppc4xx_cleanup; - - /* Allocate bus num dynamically. */ - bbp->master->bus_num = -1; - - /* the spi->mode bits understood by this driver: */ - bbp->master->mode_bits = - SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST; - - /* this many pins in all GPIO controllers */ - bbp->master->num_chipselect = num_gpios; - - /* Get the clock for the OPB */ - opbnp = of_find_compatible_node(NULL, NULL, "ibm,opb"); - if (opbnp == NULL) { - dev_err(dev, "OPB: cannot find node\n"); - ret = -ENODEV; - goto free_gpios; - } - /* Get the clock (Hz) for the OPB */ - clk = of_get_property(opbnp, "clock-frequency", NULL); - if (clk == NULL) { - dev_err(dev, "OPB: no clock-frequency property set\n"); - of_node_put(opbnp); - ret = -ENODEV; - goto free_gpios; - } - hw->opb_freq = *clk; - hw->opb_freq >>= 2; - of_node_put(opbnp); - - ret = of_address_to_resource(np, 0, &resource); - if (ret) { - dev_err(dev, "error while parsing device node resource\n"); - goto free_gpios; - } - hw->mapbase = resource.start; - hw->mapsize = resource.end - resource.start + 1; - - /* Sanity check */ - if (hw->mapsize < sizeof(struct spi_ppc4xx_regs)) { - dev_err(dev, "too small to map registers\n"); - ret = -EINVAL; - goto free_gpios; - } - - /* Request IRQ */ - hw->irqnum = irq_of_parse_and_map(np, 0); - ret = request_irq(hw->irqnum, spi_ppc4xx_int, - IRQF_DISABLED, "spi_ppc4xx_of", (void *)hw); - if (ret) { - dev_err(dev, "unable to allocate interrupt\n"); - goto free_gpios; - } - - if (!request_mem_region(hw->mapbase, hw->mapsize, DRIVER_NAME)) { - dev_err(dev, "resource unavailable\n"); - ret = -EBUSY; - goto request_mem_error; - } - - hw->regs = ioremap(hw->mapbase, sizeof(struct spi_ppc4xx_regs)); - - if (!hw->regs) { - dev_err(dev, "unable to memory map registers\n"); - ret = -ENXIO; - goto map_io_error; - } - - spi_ppc4xx_enable(hw); - - /* Finally register our spi controller */ - dev->dma_mask = 0; - ret = spi_bitbang_start(bbp); - if (ret) { - dev_err(dev, "failed to register SPI master\n"); - goto unmap_regs; - } - - dev_info(dev, "driver initialized\n"); - - return 0; - -unmap_regs: - iounmap(hw->regs); -map_io_error: - release_mem_region(hw->mapbase, hw->mapsize); -request_mem_error: - free_irq(hw->irqnum, hw); -free_gpios: - free_gpios(hw); -free_master: - dev_set_drvdata(dev, NULL); - spi_master_put(master); - - dev_err(dev, "initialization failed\n"); - return ret; -} - -static int __exit spi_ppc4xx_of_remove(struct platform_device *op) -{ - struct spi_master *master = dev_get_drvdata(&op->dev); - struct ppc4xx_spi *hw = spi_master_get_devdata(master); - - spi_bitbang_stop(&hw->bitbang); - dev_set_drvdata(&op->dev, NULL); - release_mem_region(hw->mapbase, hw->mapsize); - free_irq(hw->irqnum, hw); - iounmap(hw->regs); - free_gpios(hw); - return 0; -} - -static const struct of_device_id spi_ppc4xx_of_match[] = { - { .compatible = "ibm,ppc4xx-spi", }, - {}, -}; - -MODULE_DEVICE_TABLE(of, spi_ppc4xx_of_match); - -static struct platform_driver spi_ppc4xx_of_driver = { - .probe = spi_ppc4xx_of_probe, - .remove = __exit_p(spi_ppc4xx_of_remove), - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - .of_match_table = spi_ppc4xx_of_match, - }, -}; - -static int __init spi_ppc4xx_init(void) -{ - return platform_driver_register(&spi_ppc4xx_of_driver); -} -module_init(spi_ppc4xx_init); - -static void __exit spi_ppc4xx_exit(void) -{ - platform_driver_unregister(&spi_ppc4xx_of_driver); -} -module_exit(spi_ppc4xx_exit); - -MODULE_AUTHOR("Gary Jennejohn & Stefan Roese"); -MODULE_DESCRIPTION("Simple PPC4xx SPI Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c deleted file mode 100644 index 1a5fcabfd565..000000000000 --- a/drivers/spi/spi_s3c24xx.c +++ /dev/null @@ -1,746 +0,0 @@ -/* linux/drivers/spi/spi_s3c24xx.c - * - * Copyright (c) 2006 Ben Dooks - * Copyright 2006-2009 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include -#include - -#include "spi_s3c24xx_fiq.h" - -/** - * s3c24xx_spi_devstate - per device data - * @hz: Last frequency calculated for @sppre field. - * @mode: Last mode setting for the @spcon field. - * @spcon: Value to write to the SPCON register. - * @sppre: Value to write to the SPPRE register. - */ -struct s3c24xx_spi_devstate { - unsigned int hz; - unsigned int mode; - u8 spcon; - u8 sppre; -}; - -enum spi_fiq_mode { - FIQ_MODE_NONE = 0, - FIQ_MODE_TX = 1, - FIQ_MODE_RX = 2, - FIQ_MODE_TXRX = 3, -}; - -struct s3c24xx_spi { - /* bitbang has to be first */ - struct spi_bitbang bitbang; - struct completion done; - - void __iomem *regs; - int irq; - int len; - int count; - - struct fiq_handler fiq_handler; - enum spi_fiq_mode fiq_mode; - unsigned char fiq_inuse; - unsigned char fiq_claimed; - - void (*set_cs)(struct s3c2410_spi_info *spi, - int cs, int pol); - - /* data buffers */ - const unsigned char *tx; - unsigned char *rx; - - struct clk *clk; - struct resource *ioarea; - struct spi_master *master; - struct spi_device *curdev; - struct device *dev; - struct s3c2410_spi_info *pdata; -}; - - -#define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT) -#define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP) - -static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev) -{ - return spi_master_get_devdata(sdev->master); -} - -static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol) -{ - gpio_set_value(spi->pin_cs, pol); -} - -static void s3c24xx_spi_chipsel(struct spi_device *spi, int value) -{ - struct s3c24xx_spi_devstate *cs = spi->controller_state; - struct s3c24xx_spi *hw = to_hw(spi); - unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0; - - /* change the chipselect state and the state of the spi engine clock */ - - switch (value) { - case BITBANG_CS_INACTIVE: - hw->set_cs(hw->pdata, spi->chip_select, cspol^1); - writeb(cs->spcon, hw->regs + S3C2410_SPCON); - break; - - case BITBANG_CS_ACTIVE: - writeb(cs->spcon | S3C2410_SPCON_ENSCK, - hw->regs + S3C2410_SPCON); - hw->set_cs(hw->pdata, spi->chip_select, cspol); - break; - } -} - -static int s3c24xx_spi_update_state(struct spi_device *spi, - struct spi_transfer *t) -{ - struct s3c24xx_spi *hw = to_hw(spi); - struct s3c24xx_spi_devstate *cs = spi->controller_state; - unsigned int bpw; - unsigned int hz; - unsigned int div; - unsigned long clk; - - bpw = t ? t->bits_per_word : spi->bits_per_word; - hz = t ? t->speed_hz : spi->max_speed_hz; - - if (!bpw) - bpw = 8; - - if (!hz) - hz = spi->max_speed_hz; - - if (bpw != 8) { - dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw); - return -EINVAL; - } - - if (spi->mode != cs->mode) { - u8 spcon = SPCON_DEFAULT | S3C2410_SPCON_ENSCK; - - if (spi->mode & SPI_CPHA) - spcon |= S3C2410_SPCON_CPHA_FMTB; - - if (spi->mode & SPI_CPOL) - spcon |= S3C2410_SPCON_CPOL_HIGH; - - cs->mode = spi->mode; - cs->spcon = spcon; - } - - if (cs->hz != hz) { - clk = clk_get_rate(hw->clk); - div = DIV_ROUND_UP(clk, hz * 2) - 1; - - if (div > 255) - div = 255; - - dev_dbg(&spi->dev, "pre-scaler=%d (wanted %d, got %ld)\n", - div, hz, clk / (2 * (div + 1))); - - cs->hz = hz; - cs->sppre = div; - } - - return 0; -} - -static int s3c24xx_spi_setupxfer(struct spi_device *spi, - struct spi_transfer *t) -{ - struct s3c24xx_spi_devstate *cs = spi->controller_state; - struct s3c24xx_spi *hw = to_hw(spi); - int ret; - - ret = s3c24xx_spi_update_state(spi, t); - if (!ret) - writeb(cs->sppre, hw->regs + S3C2410_SPPRE); - - return ret; -} - -static int s3c24xx_spi_setup(struct spi_device *spi) -{ - struct s3c24xx_spi_devstate *cs = spi->controller_state; - struct s3c24xx_spi *hw = to_hw(spi); - int ret; - - /* allocate settings on the first call */ - if (!cs) { - cs = kzalloc(sizeof(struct s3c24xx_spi_devstate), GFP_KERNEL); - if (!cs) { - dev_err(&spi->dev, "no memory for controller state\n"); - return -ENOMEM; - } - - cs->spcon = SPCON_DEFAULT; - cs->hz = -1; - spi->controller_state = cs; - } - - /* initialise the state from the device */ - ret = s3c24xx_spi_update_state(spi, NULL); - if (ret) - return ret; - - spin_lock(&hw->bitbang.lock); - if (!hw->bitbang.busy) { - hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE); - /* need to ndelay for 0.5 clocktick ? */ - } - spin_unlock(&hw->bitbang.lock); - - return 0; -} - -static void s3c24xx_spi_cleanup(struct spi_device *spi) -{ - kfree(spi->controller_state); -} - -static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count) -{ - return hw->tx ? hw->tx[count] : 0; -} - -#ifdef CONFIG_SPI_S3C24XX_FIQ -/* Support for FIQ based pseudo-DMA to improve the transfer speed. - * - * This code uses the assembly helper in spi_s3c24xx_spi.S which is - * used by the FIQ core to move data between main memory and the peripheral - * block. Since this is code running on the processor, there is no problem - * with cache coherency of the buffers, so we can use any buffer we like. - */ - -/** - * struct spi_fiq_code - FIQ code and header - * @length: The length of the code fragment, excluding this header. - * @ack_offset: The offset from @data to the word to place the IRQ ACK bit at. - * @data: The code itself to install as a FIQ handler. - */ -struct spi_fiq_code { - u32 length; - u32 ack_offset; - u8 data[0]; -}; - -extern struct spi_fiq_code s3c24xx_spi_fiq_txrx; -extern struct spi_fiq_code s3c24xx_spi_fiq_tx; -extern struct spi_fiq_code s3c24xx_spi_fiq_rx; - -/** - * ack_bit - turn IRQ into IRQ acknowledgement bit - * @irq: The interrupt number - * - * Returns the bit to write to the interrupt acknowledge register. - */ -static inline u32 ack_bit(unsigned int irq) -{ - return 1 << (irq - IRQ_EINT0); -} - -/** - * s3c24xx_spi_tryfiq - attempt to claim and setup FIQ for transfer - * @hw: The hardware state. - * - * Claim the FIQ handler (only one can be active at any one time) and - * then setup the correct transfer code for this transfer. - * - * This call updates all the necessary state information if successful, - * so the caller does not need to do anything more than start the transfer - * as normal, since the IRQ will have been re-routed to the FIQ handler. -*/ -void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw) -{ - struct pt_regs regs; - enum spi_fiq_mode mode; - struct spi_fiq_code *code; - int ret; - - if (!hw->fiq_claimed) { - /* try and claim fiq if we haven't got it, and if not - * then return and simply use another transfer method */ - - ret = claim_fiq(&hw->fiq_handler); - if (ret) - return; - } - - if (hw->tx && !hw->rx) - mode = FIQ_MODE_TX; - else if (hw->rx && !hw->tx) - mode = FIQ_MODE_RX; - else - mode = FIQ_MODE_TXRX; - - regs.uregs[fiq_rspi] = (long)hw->regs; - regs.uregs[fiq_rrx] = (long)hw->rx; - regs.uregs[fiq_rtx] = (long)hw->tx + 1; - regs.uregs[fiq_rcount] = hw->len - 1; - regs.uregs[fiq_rirq] = (long)S3C24XX_VA_IRQ; - - set_fiq_regs(®s); - - if (hw->fiq_mode != mode) { - u32 *ack_ptr; - - hw->fiq_mode = mode; - - switch (mode) { - case FIQ_MODE_TX: - code = &s3c24xx_spi_fiq_tx; - break; - case FIQ_MODE_RX: - code = &s3c24xx_spi_fiq_rx; - break; - case FIQ_MODE_TXRX: - code = &s3c24xx_spi_fiq_txrx; - break; - default: - code = NULL; - } - - BUG_ON(!code); - - ack_ptr = (u32 *)&code->data[code->ack_offset]; - *ack_ptr = ack_bit(hw->irq); - - set_fiq_handler(&code->data, code->length); - } - - s3c24xx_set_fiq(hw->irq, true); - - hw->fiq_mode = mode; - hw->fiq_inuse = 1; -} - -/** - * s3c24xx_spi_fiqop - FIQ core code callback - * @pw: Data registered with the handler - * @release: Whether this is a release or a return. - * - * Called by the FIQ code when another module wants to use the FIQ, so - * return whether we are currently using this or not and then update our - * internal state. - */ -static int s3c24xx_spi_fiqop(void *pw, int release) -{ - struct s3c24xx_spi *hw = pw; - int ret = 0; - - if (release) { - if (hw->fiq_inuse) - ret = -EBUSY; - - /* note, we do not need to unroute the FIQ, as the FIQ - * vector code de-routes it to signal the end of transfer */ - - hw->fiq_mode = FIQ_MODE_NONE; - hw->fiq_claimed = 0; - } else { - hw->fiq_claimed = 1; - } - - return ret; -} - -/** - * s3c24xx_spi_initfiq - setup the information for the FIQ core - * @hw: The hardware state. - * - * Setup the fiq_handler block to pass to the FIQ core. - */ -static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *hw) -{ - hw->fiq_handler.dev_id = hw; - hw->fiq_handler.name = dev_name(hw->dev); - hw->fiq_handler.fiq_op = s3c24xx_spi_fiqop; -} - -/** - * s3c24xx_spi_usefiq - return if we should be using FIQ. - * @hw: The hardware state. - * - * Return true if the platform data specifies whether this channel is - * allowed to use the FIQ. - */ -static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *hw) -{ - return hw->pdata->use_fiq; -} - -/** - * s3c24xx_spi_usingfiq - return if channel is using FIQ - * @spi: The hardware state. - * - * Return whether the channel is currently using the FIQ (separate from - * whether the FIQ is claimed). - */ -static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *spi) -{ - return spi->fiq_inuse; -} -#else - -static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *s) { } -static inline void s3c24xx_spi_tryfiq(struct s3c24xx_spi *s) { } -static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *s) { return false; } -static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *s) { return false; } - -#endif /* CONFIG_SPI_S3C24XX_FIQ */ - -static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t) -{ - struct s3c24xx_spi *hw = to_hw(spi); - - hw->tx = t->tx_buf; - hw->rx = t->rx_buf; - hw->len = t->len; - hw->count = 0; - - init_completion(&hw->done); - - hw->fiq_inuse = 0; - if (s3c24xx_spi_usefiq(hw) && t->len >= 3) - s3c24xx_spi_tryfiq(hw); - - /* send the first byte */ - writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT); - - wait_for_completion(&hw->done); - return hw->count; -} - -static irqreturn_t s3c24xx_spi_irq(int irq, void *dev) -{ - struct s3c24xx_spi *hw = dev; - unsigned int spsta = readb(hw->regs + S3C2410_SPSTA); - unsigned int count = hw->count; - - if (spsta & S3C2410_SPSTA_DCOL) { - dev_dbg(hw->dev, "data-collision\n"); - complete(&hw->done); - goto irq_done; - } - - if (!(spsta & S3C2410_SPSTA_READY)) { - dev_dbg(hw->dev, "spi not ready for tx?\n"); - complete(&hw->done); - goto irq_done; - } - - if (!s3c24xx_spi_usingfiq(hw)) { - hw->count++; - - if (hw->rx) - hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT); - - count++; - - if (count < hw->len) - writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT); - else - complete(&hw->done); - } else { - hw->count = hw->len; - hw->fiq_inuse = 0; - - if (hw->rx) - hw->rx[hw->len-1] = readb(hw->regs + S3C2410_SPRDAT); - - complete(&hw->done); - } - - irq_done: - return IRQ_HANDLED; -} - -static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw) -{ - /* for the moment, permanently enable the clock */ - - clk_enable(hw->clk); - - /* program defaults into the registers */ - - writeb(0xff, hw->regs + S3C2410_SPPRE); - writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN); - writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON); - - if (hw->pdata) { - if (hw->set_cs == s3c24xx_spi_gpiocs) - gpio_direction_output(hw->pdata->pin_cs, 1); - - if (hw->pdata->gpio_setup) - hw->pdata->gpio_setup(hw->pdata, 1); - } -} - -static int __init s3c24xx_spi_probe(struct platform_device *pdev) -{ - struct s3c2410_spi_info *pdata; - struct s3c24xx_spi *hw; - struct spi_master *master; - struct resource *res; - int err = 0; - - master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi)); - if (master == NULL) { - dev_err(&pdev->dev, "No memory for spi_master\n"); - err = -ENOMEM; - goto err_nomem; - } - - hw = spi_master_get_devdata(master); - memset(hw, 0, sizeof(struct s3c24xx_spi)); - - hw->master = spi_master_get(master); - hw->pdata = pdata = pdev->dev.platform_data; - hw->dev = &pdev->dev; - - if (pdata == NULL) { - dev_err(&pdev->dev, "No platform data supplied\n"); - err = -ENOENT; - goto err_no_pdata; - } - - platform_set_drvdata(pdev, hw); - init_completion(&hw->done); - - /* initialise fiq handler */ - - s3c24xx_spi_initfiq(hw); - - /* setup the master state. */ - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - - master->num_chipselect = hw->pdata->num_cs; - master->bus_num = pdata->bus_num; - - /* setup the state for the bitbang driver */ - - hw->bitbang.master = hw->master; - hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer; - hw->bitbang.chipselect = s3c24xx_spi_chipsel; - hw->bitbang.txrx_bufs = s3c24xx_spi_txrx; - - hw->master->setup = s3c24xx_spi_setup; - hw->master->cleanup = s3c24xx_spi_cleanup; - - dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang); - - /* find and map our resources */ - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - err = -ENOENT; - goto err_no_iores; - } - - hw->ioarea = request_mem_region(res->start, resource_size(res), - pdev->name); - - if (hw->ioarea == NULL) { - dev_err(&pdev->dev, "Cannot reserve region\n"); - err = -ENXIO; - goto err_no_iores; - } - - hw->regs = ioremap(res->start, resource_size(res)); - if (hw->regs == NULL) { - dev_err(&pdev->dev, "Cannot map IO\n"); - err = -ENXIO; - goto err_no_iomap; - } - - hw->irq = platform_get_irq(pdev, 0); - if (hw->irq < 0) { - dev_err(&pdev->dev, "No IRQ specified\n"); - err = -ENOENT; - goto err_no_irq; - } - - err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw); - if (err) { - dev_err(&pdev->dev, "Cannot claim IRQ\n"); - goto err_no_irq; - } - - hw->clk = clk_get(&pdev->dev, "spi"); - if (IS_ERR(hw->clk)) { - dev_err(&pdev->dev, "No clock for device\n"); - err = PTR_ERR(hw->clk); - goto err_no_clk; - } - - /* setup any gpio we can */ - - if (!pdata->set_cs) { - if (pdata->pin_cs < 0) { - dev_err(&pdev->dev, "No chipselect pin\n"); - goto err_register; - } - - err = gpio_request(pdata->pin_cs, dev_name(&pdev->dev)); - if (err) { - dev_err(&pdev->dev, "Failed to get gpio for cs\n"); - goto err_register; - } - - hw->set_cs = s3c24xx_spi_gpiocs; - gpio_direction_output(pdata->pin_cs, 1); - } else - hw->set_cs = pdata->set_cs; - - s3c24xx_spi_initialsetup(hw); - - /* register our spi controller */ - - err = spi_bitbang_start(&hw->bitbang); - if (err) { - dev_err(&pdev->dev, "Failed to register SPI master\n"); - goto err_register; - } - - return 0; - - err_register: - if (hw->set_cs == s3c24xx_spi_gpiocs) - gpio_free(pdata->pin_cs); - - clk_disable(hw->clk); - clk_put(hw->clk); - - err_no_clk: - free_irq(hw->irq, hw); - - err_no_irq: - iounmap(hw->regs); - - err_no_iomap: - release_resource(hw->ioarea); - kfree(hw->ioarea); - - err_no_iores: - err_no_pdata: - spi_master_put(hw->master); - - err_nomem: - return err; -} - -static int __exit s3c24xx_spi_remove(struct platform_device *dev) -{ - struct s3c24xx_spi *hw = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); - - spi_bitbang_stop(&hw->bitbang); - - clk_disable(hw->clk); - clk_put(hw->clk); - - free_irq(hw->irq, hw); - iounmap(hw->regs); - - if (hw->set_cs == s3c24xx_spi_gpiocs) - gpio_free(hw->pdata->pin_cs); - - release_resource(hw->ioarea); - kfree(hw->ioarea); - - spi_master_put(hw->master); - return 0; -} - - -#ifdef CONFIG_PM - -static int s3c24xx_spi_suspend(struct device *dev) -{ - struct s3c24xx_spi *hw = platform_get_drvdata(to_platform_device(dev)); - - if (hw->pdata && hw->pdata->gpio_setup) - hw->pdata->gpio_setup(hw->pdata, 0); - - clk_disable(hw->clk); - return 0; -} - -static int s3c24xx_spi_resume(struct device *dev) -{ - struct s3c24xx_spi *hw = platform_get_drvdata(to_platform_device(dev)); - - s3c24xx_spi_initialsetup(hw); - return 0; -} - -static const struct dev_pm_ops s3c24xx_spi_pmops = { - .suspend = s3c24xx_spi_suspend, - .resume = s3c24xx_spi_resume, -}; - -#define S3C24XX_SPI_PMOPS &s3c24xx_spi_pmops -#else -#define S3C24XX_SPI_PMOPS NULL -#endif /* CONFIG_PM */ - -MODULE_ALIAS("platform:s3c2410-spi"); -static struct platform_driver s3c24xx_spi_driver = { - .remove = __exit_p(s3c24xx_spi_remove), - .driver = { - .name = "s3c2410-spi", - .owner = THIS_MODULE, - .pm = S3C24XX_SPI_PMOPS, - }, -}; - -static int __init s3c24xx_spi_init(void) -{ - return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe); -} - -static void __exit s3c24xx_spi_exit(void) -{ - platform_driver_unregister(&s3c24xx_spi_driver); -} - -module_init(s3c24xx_spi_init); -module_exit(s3c24xx_spi_exit); - -MODULE_DESCRIPTION("S3C24XX SPI Driver"); -MODULE_AUTHOR("Ben Dooks, "); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_s3c24xx_fiq.S b/drivers/spi/spi_s3c24xx_fiq.S deleted file mode 100644 index 3793cae361db..000000000000 --- a/drivers/spi/spi_s3c24xx_fiq.S +++ /dev/null @@ -1,116 +0,0 @@ -/* linux/drivers/spi/spi_s3c24xx_fiq.S - * - * Copyright 2009 Simtec Electronics - * Ben Dooks - * - * S3C24XX SPI - FIQ pseudo-DMA transfer code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include - -#include -#include -#include - -#include "spi_s3c24xx_fiq.h" - - .text - - @ entry to these routines is as follows, with the register names - @ defined in fiq.h so that they can be shared with the C files which - @ setup the calling registers. - @ - @ fiq_rirq The base of the IRQ registers to find S3C2410_SRCPND - @ fiq_rtmp Temporary register to hold tx/rx data - @ fiq_rspi The base of the SPI register block - @ fiq_rtx The tx buffer pointer - @ fiq_rrx The rx buffer pointer - @ fiq_rcount The number of bytes to move - - @ each entry starts with a word entry of how long it is - @ and an offset to the irq acknowledgment word - -ENTRY(s3c24xx_spi_fiq_rx) -s3c24xx_spi_fix_rx: - .word fiq_rx_end - fiq_rx_start - .word fiq_rx_irq_ack - fiq_rx_start -fiq_rx_start: - ldr fiq_rtmp, fiq_rx_irq_ack - str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] - - ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] - strb fiq_rtmp, [ fiq_rrx ], #1 - - mov fiq_rtmp, #0xff - strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] - - subs fiq_rcount, fiq_rcount, #1 - subnes pc, lr, #4 @@ return, still have work to do - - @@ set IRQ controller so that next op will trigger IRQ - mov fiq_rtmp, #0 - str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] - subs pc, lr, #4 - -fiq_rx_irq_ack: - .word 0 -fiq_rx_end: - -ENTRY(s3c24xx_spi_fiq_txrx) -s3c24xx_spi_fiq_txrx: - .word fiq_txrx_end - fiq_txrx_start - .word fiq_txrx_irq_ack - fiq_txrx_start -fiq_txrx_start: - - ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] - strb fiq_rtmp, [ fiq_rrx ], #1 - - ldr fiq_rtmp, fiq_txrx_irq_ack - str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] - - ldrb fiq_rtmp, [ fiq_rtx ], #1 - strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] - - subs fiq_rcount, fiq_rcount, #1 - subnes pc, lr, #4 @@ return, still have work to do - - mov fiq_rtmp, #0 - str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] - subs pc, lr, #4 - -fiq_txrx_irq_ack: - .word 0 - -fiq_txrx_end: - -ENTRY(s3c24xx_spi_fiq_tx) -s3c24xx_spi_fix_tx: - .word fiq_tx_end - fiq_tx_start - .word fiq_tx_irq_ack - fiq_tx_start -fiq_tx_start: - ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] - - ldr fiq_rtmp, fiq_tx_irq_ack - str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] - - ldrb fiq_rtmp, [ fiq_rtx ], #1 - strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] - - subs fiq_rcount, fiq_rcount, #1 - subnes pc, lr, #4 @@ return, still have work to do - - mov fiq_rtmp, #0 - str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] - subs pc, lr, #4 - -fiq_tx_irq_ack: - .word 0 - -fiq_tx_end: - - .end diff --git a/drivers/spi/spi_s3c24xx_fiq.h b/drivers/spi/spi_s3c24xx_fiq.h deleted file mode 100644 index a5950bb25b51..000000000000 --- a/drivers/spi/spi_s3c24xx_fiq.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/drivers/spi/spi_s3c24xx_fiq.h - * - * Copyright 2009 Simtec Electronics - * Ben Dooks - * - * S3C24XX SPI - FIQ pseudo-DMA transfer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* We have R8 through R13 to play with */ - -#ifdef __ASSEMBLY__ -#define __REG_NR(x) r##x -#else -#define __REG_NR(x) (x) -#endif - -#define fiq_rspi __REG_NR(8) -#define fiq_rtmp __REG_NR(9) -#define fiq_rrx __REG_NR(10) -#define fiq_rtx __REG_NR(11) -#define fiq_rcount __REG_NR(12) -#define fiq_rirq __REG_NR(13) diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c deleted file mode 100644 index be991359bf92..000000000000 --- a/drivers/spi/spi_s3c24xx_gpio.c +++ /dev/null @@ -1,201 +0,0 @@ -/* linux/drivers/spi/spi_s3c24xx_gpio.c - * - * Copyright (c) 2006 Ben Dooks - * Copyright (c) 2006 Simtec Electronics - * - * S3C24XX GPIO based SPI driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -struct s3c2410_spigpio { - struct spi_bitbang bitbang; - - struct s3c2410_spigpio_info *info; - struct platform_device *dev; -}; - -static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi) -{ - return spi_master_get_devdata(spi->master); -} - -static inline void setsck(struct spi_device *dev, int on) -{ - struct s3c2410_spigpio *sg = spidev_to_sg(dev); - s3c2410_gpio_setpin(sg->info->pin_clk, on ? 1 : 0); -} - -static inline void setmosi(struct spi_device *dev, int on) -{ - struct s3c2410_spigpio *sg = spidev_to_sg(dev); - s3c2410_gpio_setpin(sg->info->pin_mosi, on ? 1 : 0); -} - -static inline u32 getmiso(struct spi_device *dev) -{ - struct s3c2410_spigpio *sg = spidev_to_sg(dev); - return s3c2410_gpio_getpin(sg->info->pin_miso) ? 1 : 0; -} - -#define spidelay(x) ndelay(x) - -#include "spi_bitbang_txrx.h" - - -static u32 s3c2410_spigpio_txrx_mode0(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); -} - -static u32 s3c2410_spigpio_txrx_mode1(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); -} - -static u32 s3c2410_spigpio_txrx_mode2(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); -} - -static u32 s3c2410_spigpio_txrx_mode3(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); -} - - -static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value) -{ - struct s3c2410_spigpio *sg = spidev_to_sg(dev); - - if (sg->info && sg->info->chip_select) - (sg->info->chip_select)(sg->info, value); -} - -static int s3c2410_spigpio_probe(struct platform_device *dev) -{ - struct s3c2410_spigpio_info *info; - struct spi_master *master; - struct s3c2410_spigpio *sp; - int ret; - - master = spi_alloc_master(&dev->dev, sizeof(struct s3c2410_spigpio)); - if (master == NULL) { - dev_err(&dev->dev, "failed to allocate spi master\n"); - ret = -ENOMEM; - goto err; - } - - sp = spi_master_get_devdata(master); - - platform_set_drvdata(dev, sp); - - /* copy in the plkatform data */ - info = sp->info = dev->dev.platform_data; - - /* setup spi bitbang adaptor */ - sp->bitbang.master = spi_master_get(master); - sp->bitbang.master->bus_num = info->bus_num; - sp->bitbang.master->num_chipselect = info->num_chipselect; - sp->bitbang.chipselect = s3c2410_spigpio_chipselect; - - sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0; - sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1; - sp->bitbang.txrx_word[SPI_MODE_2] = s3c2410_spigpio_txrx_mode2; - sp->bitbang.txrx_word[SPI_MODE_3] = s3c2410_spigpio_txrx_mode3; - - /* set state of spi pins, always assume that the clock is - * available, but do check the MOSI and MISO. */ - s3c2410_gpio_setpin(info->pin_clk, 0); - s3c2410_gpio_cfgpin(info->pin_clk, S3C2410_GPIO_OUTPUT); - - if (info->pin_mosi < S3C2410_GPH10) { - s3c2410_gpio_setpin(info->pin_mosi, 0); - s3c2410_gpio_cfgpin(info->pin_mosi, S3C2410_GPIO_OUTPUT); - } - - if (info->pin_miso != S3C2410_GPA0 && info->pin_miso < S3C2410_GPH10) - s3c2410_gpio_cfgpin(info->pin_miso, S3C2410_GPIO_INPUT); - - ret = spi_bitbang_start(&sp->bitbang); - if (ret) - goto err_no_bitbang; - - return 0; - - err_no_bitbang: - spi_master_put(sp->bitbang.master); - err: - return ret; - -} - -static int s3c2410_spigpio_remove(struct platform_device *dev) -{ - struct s3c2410_spigpio *sp = platform_get_drvdata(dev); - - spi_bitbang_stop(&sp->bitbang); - spi_master_put(sp->bitbang.master); - - return 0; -} - -/* all gpio should be held over suspend/resume, so we should - * not need to deal with this -*/ - -#define s3c2410_spigpio_suspend NULL -#define s3c2410_spigpio_resume NULL - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:spi_s3c24xx_gpio"); - -static struct platform_driver s3c2410_spigpio_drv = { - .probe = s3c2410_spigpio_probe, - .remove = s3c2410_spigpio_remove, - .suspend = s3c2410_spigpio_suspend, - .resume = s3c2410_spigpio_resume, - .driver = { - .name = "spi_s3c24xx_gpio", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c2410_spigpio_init(void) -{ - return platform_driver_register(&s3c2410_spigpio_drv); -} - -static void __exit s3c2410_spigpio_exit(void) -{ - platform_driver_unregister(&s3c2410_spigpio_drv); -} - -module_init(s3c2410_spigpio_init); -module_exit(s3c2410_spigpio_exit); - -MODULE_DESCRIPTION("S3C24XX SPI Driver"); -MODULE_AUTHOR("Ben Dooks, "); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c deleted file mode 100644 index 795828b90f45..000000000000 --- a/drivers/spi/spi_s3c64xx.c +++ /dev/null @@ -1,1248 +0,0 @@ -/* linux/drivers/spi/spi_s3c64xx.c - * - * Copyright (C) 2009 Samsung Electronics Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -/* Registers and bit-fields */ - -#define S3C64XX_SPI_CH_CFG 0x00 -#define S3C64XX_SPI_CLK_CFG 0x04 -#define S3C64XX_SPI_MODE_CFG 0x08 -#define S3C64XX_SPI_SLAVE_SEL 0x0C -#define S3C64XX_SPI_INT_EN 0x10 -#define S3C64XX_SPI_STATUS 0x14 -#define S3C64XX_SPI_TX_DATA 0x18 -#define S3C64XX_SPI_RX_DATA 0x1C -#define S3C64XX_SPI_PACKET_CNT 0x20 -#define S3C64XX_SPI_PENDING_CLR 0x24 -#define S3C64XX_SPI_SWAP_CFG 0x28 -#define S3C64XX_SPI_FB_CLK 0x2C - -#define S3C64XX_SPI_CH_HS_EN (1<<6) /* High Speed Enable */ -#define S3C64XX_SPI_CH_SW_RST (1<<5) -#define S3C64XX_SPI_CH_SLAVE (1<<4) -#define S3C64XX_SPI_CPOL_L (1<<3) -#define S3C64XX_SPI_CPHA_B (1<<2) -#define S3C64XX_SPI_CH_RXCH_ON (1<<1) -#define S3C64XX_SPI_CH_TXCH_ON (1<<0) - -#define S3C64XX_SPI_CLKSEL_SRCMSK (3<<9) -#define S3C64XX_SPI_CLKSEL_SRCSHFT 9 -#define S3C64XX_SPI_ENCLK_ENABLE (1<<8) -#define S3C64XX_SPI_PSR_MASK 0xff - -#define S3C64XX_SPI_MODE_CH_TSZ_BYTE (0<<29) -#define S3C64XX_SPI_MODE_CH_TSZ_HALFWORD (1<<29) -#define S3C64XX_SPI_MODE_CH_TSZ_WORD (2<<29) -#define S3C64XX_SPI_MODE_CH_TSZ_MASK (3<<29) -#define S3C64XX_SPI_MODE_BUS_TSZ_BYTE (0<<17) -#define S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD (1<<17) -#define S3C64XX_SPI_MODE_BUS_TSZ_WORD (2<<17) -#define S3C64XX_SPI_MODE_BUS_TSZ_MASK (3<<17) -#define S3C64XX_SPI_MODE_RXDMA_ON (1<<2) -#define S3C64XX_SPI_MODE_TXDMA_ON (1<<1) -#define S3C64XX_SPI_MODE_4BURST (1<<0) - -#define S3C64XX_SPI_SLAVE_AUTO (1<<1) -#define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0) - -#define S3C64XX_SPI_ACT(c) writel(0, (c)->regs + S3C64XX_SPI_SLAVE_SEL) - -#define S3C64XX_SPI_DEACT(c) writel(S3C64XX_SPI_SLAVE_SIG_INACT, \ - (c)->regs + S3C64XX_SPI_SLAVE_SEL) - -#define S3C64XX_SPI_INT_TRAILING_EN (1<<6) -#define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5) -#define S3C64XX_SPI_INT_RX_UNDERRUN_EN (1<<4) -#define S3C64XX_SPI_INT_TX_OVERRUN_EN (1<<3) -#define S3C64XX_SPI_INT_TX_UNDERRUN_EN (1<<2) -#define S3C64XX_SPI_INT_RX_FIFORDY_EN (1<<1) -#define S3C64XX_SPI_INT_TX_FIFORDY_EN (1<<0) - -#define S3C64XX_SPI_ST_RX_OVERRUN_ERR (1<<5) -#define S3C64XX_SPI_ST_RX_UNDERRUN_ERR (1<<4) -#define S3C64XX_SPI_ST_TX_OVERRUN_ERR (1<<3) -#define S3C64XX_SPI_ST_TX_UNDERRUN_ERR (1<<2) -#define S3C64XX_SPI_ST_RX_FIFORDY (1<<1) -#define S3C64XX_SPI_ST_TX_FIFORDY (1<<0) - -#define S3C64XX_SPI_PACKET_CNT_EN (1<<16) - -#define S3C64XX_SPI_PND_TX_UNDERRUN_CLR (1<<4) -#define S3C64XX_SPI_PND_TX_OVERRUN_CLR (1<<3) -#define S3C64XX_SPI_PND_RX_UNDERRUN_CLR (1<<2) -#define S3C64XX_SPI_PND_RX_OVERRUN_CLR (1<<1) -#define S3C64XX_SPI_PND_TRAILING_CLR (1<<0) - -#define S3C64XX_SPI_SWAP_RX_HALF_WORD (1<<7) -#define S3C64XX_SPI_SWAP_RX_BYTE (1<<6) -#define S3C64XX_SPI_SWAP_RX_BIT (1<<5) -#define S3C64XX_SPI_SWAP_RX_EN (1<<4) -#define S3C64XX_SPI_SWAP_TX_HALF_WORD (1<<3) -#define S3C64XX_SPI_SWAP_TX_BYTE (1<<2) -#define S3C64XX_SPI_SWAP_TX_BIT (1<<1) -#define S3C64XX_SPI_SWAP_TX_EN (1<<0) - -#define S3C64XX_SPI_FBCLK_MSK (3<<0) - -#define S3C64XX_SPI_ST_TRLCNTZ(v, i) ((((v) >> (i)->rx_lvl_offset) & \ - (((i)->fifo_lvl_mask + 1))) \ - ? 1 : 0) - -#define S3C64XX_SPI_ST_TX_DONE(v, i) ((((v) >> (i)->rx_lvl_offset) & \ - (((i)->fifo_lvl_mask + 1) << 1)) \ - ? 1 : 0) -#define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask) -#define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask) - -#define S3C64XX_SPI_MAX_TRAILCNT 0x3ff -#define S3C64XX_SPI_TRAILCNT_OFF 19 - -#define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT - -#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) - -#define SUSPND (1<<0) -#define SPIBUSY (1<<1) -#define RXBUSY (1<<2) -#define TXBUSY (1<<3) - -/** - * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver. - * @clk: Pointer to the spi clock. - * @src_clk: Pointer to the clock used to generate SPI signals. - * @master: Pointer to the SPI Protocol master. - * @workqueue: Work queue for the SPI xfer requests. - * @cntrlr_info: Platform specific data for the controller this driver manages. - * @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint. - * @work: Work - * @queue: To log SPI xfer requests. - * @lock: Controller specific lock. - * @state: Set of FLAGS to indicate status. - * @rx_dmach: Controller's DMA channel for Rx. - * @tx_dmach: Controller's DMA channel for Tx. - * @sfr_start: BUS address of SPI controller regs. - * @regs: Pointer to ioremap'ed controller registers. - * @xfer_completion: To indicate completion of xfer task. - * @cur_mode: Stores the active configuration of the controller. - * @cur_bpw: Stores the active bits per word settings. - * @cur_speed: Stores the active xfer clock speed. - */ -struct s3c64xx_spi_driver_data { - void __iomem *regs; - struct clk *clk; - struct clk *src_clk; - struct platform_device *pdev; - struct spi_master *master; - struct workqueue_struct *workqueue; - struct s3c64xx_spi_info *cntrlr_info; - struct spi_device *tgl_spi; - struct work_struct work; - struct list_head queue; - spinlock_t lock; - enum dma_ch rx_dmach; - enum dma_ch tx_dmach; - unsigned long sfr_start; - struct completion xfer_completion; - unsigned state; - unsigned cur_mode, cur_bpw; - unsigned cur_speed; -}; - -static struct s3c2410_dma_client s3c64xx_spi_dma_client = { - .name = "samsung-spi-dma", -}; - -static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) -{ - struct s3c64xx_spi_info *sci = sdd->cntrlr_info; - void __iomem *regs = sdd->regs; - unsigned long loops; - u32 val; - - writel(0, regs + S3C64XX_SPI_PACKET_CNT); - - val = readl(regs + S3C64XX_SPI_CH_CFG); - val |= S3C64XX_SPI_CH_SW_RST; - val &= ~S3C64XX_SPI_CH_HS_EN; - writel(val, regs + S3C64XX_SPI_CH_CFG); - - /* Flush TxFIFO*/ - loops = msecs_to_loops(1); - do { - val = readl(regs + S3C64XX_SPI_STATUS); - } while (TX_FIFO_LVL(val, sci) && loops--); - - if (loops == 0) - dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n"); - - /* Flush RxFIFO*/ - loops = msecs_to_loops(1); - do { - val = readl(regs + S3C64XX_SPI_STATUS); - if (RX_FIFO_LVL(val, sci)) - readl(regs + S3C64XX_SPI_RX_DATA); - else - break; - } while (loops--); - - if (loops == 0) - dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n"); - - val = readl(regs + S3C64XX_SPI_CH_CFG); - val &= ~S3C64XX_SPI_CH_SW_RST; - writel(val, regs + S3C64XX_SPI_CH_CFG); - - val = readl(regs + S3C64XX_SPI_MODE_CFG); - val &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); - writel(val, regs + S3C64XX_SPI_MODE_CFG); - - val = readl(regs + S3C64XX_SPI_CH_CFG); - val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON); - writel(val, regs + S3C64XX_SPI_CH_CFG); -} - -static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, - struct spi_device *spi, - struct spi_transfer *xfer, int dma_mode) -{ - struct s3c64xx_spi_info *sci = sdd->cntrlr_info; - void __iomem *regs = sdd->regs; - u32 modecfg, chcfg; - - modecfg = readl(regs + S3C64XX_SPI_MODE_CFG); - modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); - - chcfg = readl(regs + S3C64XX_SPI_CH_CFG); - chcfg &= ~S3C64XX_SPI_CH_TXCH_ON; - - if (dma_mode) { - chcfg &= ~S3C64XX_SPI_CH_RXCH_ON; - } else { - /* Always shift in data in FIFO, even if xfer is Tx only, - * this helps setting PCKT_CNT value for generating clocks - * as exactly needed. - */ - chcfg |= S3C64XX_SPI_CH_RXCH_ON; - writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) - | S3C64XX_SPI_PACKET_CNT_EN, - regs + S3C64XX_SPI_PACKET_CNT); - } - - if (xfer->tx_buf != NULL) { - sdd->state |= TXBUSY; - chcfg |= S3C64XX_SPI_CH_TXCH_ON; - if (dma_mode) { - modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; - s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8); - s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd, - xfer->tx_dma, xfer->len); - s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START); - } else { - switch (sdd->cur_bpw) { - case 32: - iowrite32_rep(regs + S3C64XX_SPI_TX_DATA, - xfer->tx_buf, xfer->len / 4); - break; - case 16: - iowrite16_rep(regs + S3C64XX_SPI_TX_DATA, - xfer->tx_buf, xfer->len / 2); - break; - default: - iowrite8_rep(regs + S3C64XX_SPI_TX_DATA, - xfer->tx_buf, xfer->len); - break; - } - } - } - - if (xfer->rx_buf != NULL) { - sdd->state |= RXBUSY; - - if (sci->high_speed && sdd->cur_speed >= 30000000UL - && !(sdd->cur_mode & SPI_CPHA)) - chcfg |= S3C64XX_SPI_CH_HS_EN; - - if (dma_mode) { - modecfg |= S3C64XX_SPI_MODE_RXDMA_ON; - chcfg |= S3C64XX_SPI_CH_RXCH_ON; - writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) - | S3C64XX_SPI_PACKET_CNT_EN, - regs + S3C64XX_SPI_PACKET_CNT); - s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8); - s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd, - xfer->rx_dma, xfer->len); - s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START); - } - } - - writel(modecfg, regs + S3C64XX_SPI_MODE_CFG); - writel(chcfg, regs + S3C64XX_SPI_CH_CFG); -} - -static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd, - struct spi_device *spi) -{ - struct s3c64xx_spi_csinfo *cs; - - if (sdd->tgl_spi != NULL) { /* If last device toggled after mssg */ - if (sdd->tgl_spi != spi) { /* if last mssg on diff device */ - /* Deselect the last toggled device */ - cs = sdd->tgl_spi->controller_data; - cs->set_level(cs->line, - spi->mode & SPI_CS_HIGH ? 0 : 1); - } - sdd->tgl_spi = NULL; - } - - cs = spi->controller_data; - cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0); -} - -static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd, - struct spi_transfer *xfer, int dma_mode) -{ - struct s3c64xx_spi_info *sci = sdd->cntrlr_info; - void __iomem *regs = sdd->regs; - unsigned long val; - int ms; - - /* millisecs to xfer 'len' bytes @ 'cur_speed' */ - ms = xfer->len * 8 * 1000 / sdd->cur_speed; - ms += 10; /* some tolerance */ - - if (dma_mode) { - val = msecs_to_jiffies(ms) + 10; - val = wait_for_completion_timeout(&sdd->xfer_completion, val); - } else { - u32 status; - val = msecs_to_loops(ms); - do { - status = readl(regs + S3C64XX_SPI_STATUS); - } while (RX_FIFO_LVL(status, sci) < xfer->len && --val); - } - - if (!val) - return -EIO; - - if (dma_mode) { - u32 status; - - /* - * DmaTx returns after simply writing data in the FIFO, - * w/o waiting for real transmission on the bus to finish. - * DmaRx returns only after Dma read data from FIFO which - * needs bus transmission to finish, so we don't worry if - * Xfer involved Rx(with or without Tx). - */ - if (xfer->rx_buf == NULL) { - val = msecs_to_loops(10); - status = readl(regs + S3C64XX_SPI_STATUS); - while ((TX_FIFO_LVL(status, sci) - || !S3C64XX_SPI_ST_TX_DONE(status, sci)) - && --val) { - cpu_relax(); - status = readl(regs + S3C64XX_SPI_STATUS); - } - - if (!val) - return -EIO; - } - } else { - /* If it was only Tx */ - if (xfer->rx_buf == NULL) { - sdd->state &= ~TXBUSY; - return 0; - } - - switch (sdd->cur_bpw) { - case 32: - ioread32_rep(regs + S3C64XX_SPI_RX_DATA, - xfer->rx_buf, xfer->len / 4); - break; - case 16: - ioread16_rep(regs + S3C64XX_SPI_RX_DATA, - xfer->rx_buf, xfer->len / 2); - break; - default: - ioread8_rep(regs + S3C64XX_SPI_RX_DATA, - xfer->rx_buf, xfer->len); - break; - } - sdd->state &= ~RXBUSY; - } - - return 0; -} - -static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, - struct spi_device *spi) -{ - struct s3c64xx_spi_csinfo *cs = spi->controller_data; - - if (sdd->tgl_spi == spi) - sdd->tgl_spi = NULL; - - cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1); -} - -static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) -{ - struct s3c64xx_spi_info *sci = sdd->cntrlr_info; - void __iomem *regs = sdd->regs; - u32 val; - - /* Disable Clock */ - if (sci->clk_from_cmu) { - clk_disable(sdd->src_clk); - } else { - val = readl(regs + S3C64XX_SPI_CLK_CFG); - val &= ~S3C64XX_SPI_ENCLK_ENABLE; - writel(val, regs + S3C64XX_SPI_CLK_CFG); - } - - /* Set Polarity and Phase */ - val = readl(regs + S3C64XX_SPI_CH_CFG); - val &= ~(S3C64XX_SPI_CH_SLAVE | - S3C64XX_SPI_CPOL_L | - S3C64XX_SPI_CPHA_B); - - if (sdd->cur_mode & SPI_CPOL) - val |= S3C64XX_SPI_CPOL_L; - - if (sdd->cur_mode & SPI_CPHA) - val |= S3C64XX_SPI_CPHA_B; - - writel(val, regs + S3C64XX_SPI_CH_CFG); - - /* Set Channel & DMA Mode */ - val = readl(regs + S3C64XX_SPI_MODE_CFG); - val &= ~(S3C64XX_SPI_MODE_BUS_TSZ_MASK - | S3C64XX_SPI_MODE_CH_TSZ_MASK); - - switch (sdd->cur_bpw) { - case 32: - val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD; - val |= S3C64XX_SPI_MODE_CH_TSZ_WORD; - break; - case 16: - val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD; - val |= S3C64XX_SPI_MODE_CH_TSZ_HALFWORD; - break; - default: - val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE; - val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; - break; - } - - writel(val, regs + S3C64XX_SPI_MODE_CFG); - - if (sci->clk_from_cmu) { - /* Configure Clock */ - /* There is half-multiplier before the SPI */ - clk_set_rate(sdd->src_clk, sdd->cur_speed * 2); - /* Enable Clock */ - clk_enable(sdd->src_clk); - } else { - /* Configure Clock */ - val = readl(regs + S3C64XX_SPI_CLK_CFG); - val &= ~S3C64XX_SPI_PSR_MASK; - val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1) - & S3C64XX_SPI_PSR_MASK); - writel(val, regs + S3C64XX_SPI_CLK_CFG); - - /* Enable Clock */ - val = readl(regs + S3C64XX_SPI_CLK_CFG); - val |= S3C64XX_SPI_ENCLK_ENABLE; - writel(val, regs + S3C64XX_SPI_CLK_CFG); - } -} - -static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id, - int size, enum s3c2410_dma_buffresult res) -{ - struct s3c64xx_spi_driver_data *sdd = buf_id; - unsigned long flags; - - spin_lock_irqsave(&sdd->lock, flags); - - if (res == S3C2410_RES_OK) - sdd->state &= ~RXBUSY; - else - dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size); - - /* If the other done */ - if (!(sdd->state & TXBUSY)) - complete(&sdd->xfer_completion); - - spin_unlock_irqrestore(&sdd->lock, flags); -} - -static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id, - int size, enum s3c2410_dma_buffresult res) -{ - struct s3c64xx_spi_driver_data *sdd = buf_id; - unsigned long flags; - - spin_lock_irqsave(&sdd->lock, flags); - - if (res == S3C2410_RES_OK) - sdd->state &= ~TXBUSY; - else - dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size); - - /* If the other done */ - if (!(sdd->state & RXBUSY)) - complete(&sdd->xfer_completion); - - spin_unlock_irqrestore(&sdd->lock, flags); -} - -#define XFER_DMAADDR_INVALID DMA_BIT_MASK(32) - -static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, - struct spi_message *msg) -{ - struct s3c64xx_spi_info *sci = sdd->cntrlr_info; - struct device *dev = &sdd->pdev->dev; - struct spi_transfer *xfer; - - if (msg->is_dma_mapped) - return 0; - - /* First mark all xfer unmapped */ - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - xfer->rx_dma = XFER_DMAADDR_INVALID; - xfer->tx_dma = XFER_DMAADDR_INVALID; - } - - /* Map until end or first fail */ - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - - if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) - continue; - - if (xfer->tx_buf != NULL) { - xfer->tx_dma = dma_map_single(dev, - (void *)xfer->tx_buf, xfer->len, - DMA_TO_DEVICE); - if (dma_mapping_error(dev, xfer->tx_dma)) { - dev_err(dev, "dma_map_single Tx failed\n"); - xfer->tx_dma = XFER_DMAADDR_INVALID; - return -ENOMEM; - } - } - - if (xfer->rx_buf != NULL) { - xfer->rx_dma = dma_map_single(dev, xfer->rx_buf, - xfer->len, DMA_FROM_DEVICE); - if (dma_mapping_error(dev, xfer->rx_dma)) { - dev_err(dev, "dma_map_single Rx failed\n"); - dma_unmap_single(dev, xfer->tx_dma, - xfer->len, DMA_TO_DEVICE); - xfer->tx_dma = XFER_DMAADDR_INVALID; - xfer->rx_dma = XFER_DMAADDR_INVALID; - return -ENOMEM; - } - } - } - - return 0; -} - -static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, - struct spi_message *msg) -{ - struct s3c64xx_spi_info *sci = sdd->cntrlr_info; - struct device *dev = &sdd->pdev->dev; - struct spi_transfer *xfer; - - if (msg->is_dma_mapped) - return; - - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - - if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) - continue; - - if (xfer->rx_buf != NULL - && xfer->rx_dma != XFER_DMAADDR_INVALID) - dma_unmap_single(dev, xfer->rx_dma, - xfer->len, DMA_FROM_DEVICE); - - if (xfer->tx_buf != NULL - && xfer->tx_dma != XFER_DMAADDR_INVALID) - dma_unmap_single(dev, xfer->tx_dma, - xfer->len, DMA_TO_DEVICE); - } -} - -static void handle_msg(struct s3c64xx_spi_driver_data *sdd, - struct spi_message *msg) -{ - struct s3c64xx_spi_info *sci = sdd->cntrlr_info; - struct spi_device *spi = msg->spi; - struct s3c64xx_spi_csinfo *cs = spi->controller_data; - struct spi_transfer *xfer; - int status = 0, cs_toggle = 0; - u32 speed; - u8 bpw; - - /* If Master's(controller) state differs from that needed by Slave */ - if (sdd->cur_speed != spi->max_speed_hz - || sdd->cur_mode != spi->mode - || sdd->cur_bpw != spi->bits_per_word) { - sdd->cur_bpw = spi->bits_per_word; - sdd->cur_speed = spi->max_speed_hz; - sdd->cur_mode = spi->mode; - s3c64xx_spi_config(sdd); - } - - /* Map all the transfers if needed */ - if (s3c64xx_spi_map_mssg(sdd, msg)) { - dev_err(&spi->dev, - "Xfer: Unable to map message buffers!\n"); - status = -ENOMEM; - goto out; - } - - /* Configure feedback delay */ - writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK); - - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - - unsigned long flags; - int use_dma; - - INIT_COMPLETION(sdd->xfer_completion); - - /* Only BPW and Speed may change across transfers */ - bpw = xfer->bits_per_word ? : spi->bits_per_word; - speed = xfer->speed_hz ? : spi->max_speed_hz; - - if (xfer->len % (bpw / 8)) { - dev_err(&spi->dev, - "Xfer length(%u) not a multiple of word size(%u)\n", - xfer->len, bpw / 8); - status = -EIO; - goto out; - } - - if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) { - sdd->cur_bpw = bpw; - sdd->cur_speed = speed; - s3c64xx_spi_config(sdd); - } - - /* Polling method for xfers not bigger than FIFO capacity */ - if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) - use_dma = 0; - else - use_dma = 1; - - spin_lock_irqsave(&sdd->lock, flags); - - /* Pending only which is to be done */ - sdd->state &= ~RXBUSY; - sdd->state &= ~TXBUSY; - - enable_datapath(sdd, spi, xfer, use_dma); - - /* Slave Select */ - enable_cs(sdd, spi); - - /* Start the signals */ - S3C64XX_SPI_ACT(sdd); - - spin_unlock_irqrestore(&sdd->lock, flags); - - status = wait_for_xfer(sdd, xfer, use_dma); - - /* Quiese the signals */ - S3C64XX_SPI_DEACT(sdd); - - if (status) { - dev_err(&spi->dev, "I/O Error: " - "rx-%d tx-%d res:rx-%c tx-%c len-%d\n", - xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0, - (sdd->state & RXBUSY) ? 'f' : 'p', - (sdd->state & TXBUSY) ? 'f' : 'p', - xfer->len); - - if (use_dma) { - if (xfer->tx_buf != NULL - && (sdd->state & TXBUSY)) - s3c2410_dma_ctrl(sdd->tx_dmach, - S3C2410_DMAOP_FLUSH); - if (xfer->rx_buf != NULL - && (sdd->state & RXBUSY)) - s3c2410_dma_ctrl(sdd->rx_dmach, - S3C2410_DMAOP_FLUSH); - } - - goto out; - } - - if (xfer->delay_usecs) - udelay(xfer->delay_usecs); - - if (xfer->cs_change) { - /* Hint that the next mssg is gonna be - for the same device */ - if (list_is_last(&xfer->transfer_list, - &msg->transfers)) - cs_toggle = 1; - else - disable_cs(sdd, spi); - } - - msg->actual_length += xfer->len; - - flush_fifo(sdd); - } - -out: - if (!cs_toggle || status) - disable_cs(sdd, spi); - else - sdd->tgl_spi = spi; - - s3c64xx_spi_unmap_mssg(sdd, msg); - - msg->status = status; - - if (msg->complete) - msg->complete(msg->context); -} - -static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) -{ - if (s3c2410_dma_request(sdd->rx_dmach, - &s3c64xx_spi_dma_client, NULL) < 0) { - dev_err(&sdd->pdev->dev, "cannot get RxDMA\n"); - return 0; - } - s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb); - s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW, - sdd->sfr_start + S3C64XX_SPI_RX_DATA); - - if (s3c2410_dma_request(sdd->tx_dmach, - &s3c64xx_spi_dma_client, NULL) < 0) { - dev_err(&sdd->pdev->dev, "cannot get TxDMA\n"); - s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); - return 0; - } - s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb); - s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM, - sdd->sfr_start + S3C64XX_SPI_TX_DATA); - - return 1; -} - -static void s3c64xx_spi_work(struct work_struct *work) -{ - struct s3c64xx_spi_driver_data *sdd = container_of(work, - struct s3c64xx_spi_driver_data, work); - unsigned long flags; - - /* Acquire DMA channels */ - while (!acquire_dma(sdd)) - msleep(10); - - spin_lock_irqsave(&sdd->lock, flags); - - while (!list_empty(&sdd->queue) - && !(sdd->state & SUSPND)) { - - struct spi_message *msg; - - msg = container_of(sdd->queue.next, struct spi_message, queue); - - list_del_init(&msg->queue); - - /* Set Xfer busy flag */ - sdd->state |= SPIBUSY; - - spin_unlock_irqrestore(&sdd->lock, flags); - - handle_msg(sdd, msg); - - spin_lock_irqsave(&sdd->lock, flags); - - sdd->state &= ~SPIBUSY; - } - - spin_unlock_irqrestore(&sdd->lock, flags); - - /* Free DMA channels */ - s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client); - s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); -} - -static int s3c64xx_spi_transfer(struct spi_device *spi, - struct spi_message *msg) -{ - struct s3c64xx_spi_driver_data *sdd; - unsigned long flags; - - sdd = spi_master_get_devdata(spi->master); - - spin_lock_irqsave(&sdd->lock, flags); - - if (sdd->state & SUSPND) { - spin_unlock_irqrestore(&sdd->lock, flags); - return -ESHUTDOWN; - } - - msg->status = -EINPROGRESS; - msg->actual_length = 0; - - list_add_tail(&msg->queue, &sdd->queue); - - queue_work(sdd->workqueue, &sdd->work); - - spin_unlock_irqrestore(&sdd->lock, flags); - - return 0; -} - -/* - * Here we only check the validity of requested configuration - * and save the configuration in a local data-structure. - * The controller is actually configured only just before we - * get a message to transfer. - */ -static int s3c64xx_spi_setup(struct spi_device *spi) -{ - struct s3c64xx_spi_csinfo *cs = spi->controller_data; - struct s3c64xx_spi_driver_data *sdd; - struct s3c64xx_spi_info *sci; - struct spi_message *msg; - unsigned long flags; - int err = 0; - - if (cs == NULL || cs->set_level == NULL) { - dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select); - return -ENODEV; - } - - sdd = spi_master_get_devdata(spi->master); - sci = sdd->cntrlr_info; - - spin_lock_irqsave(&sdd->lock, flags); - - list_for_each_entry(msg, &sdd->queue, queue) { - /* Is some mssg is already queued for this device */ - if (msg->spi == spi) { - dev_err(&spi->dev, - "setup: attempt while mssg in queue!\n"); - spin_unlock_irqrestore(&sdd->lock, flags); - return -EBUSY; - } - } - - if (sdd->state & SUSPND) { - spin_unlock_irqrestore(&sdd->lock, flags); - dev_err(&spi->dev, - "setup: SPI-%d not active!\n", spi->master->bus_num); - return -ESHUTDOWN; - } - - spin_unlock_irqrestore(&sdd->lock, flags); - - if (spi->bits_per_word != 8 - && spi->bits_per_word != 16 - && spi->bits_per_word != 32) { - dev_err(&spi->dev, "setup: %dbits/wrd not supported!\n", - spi->bits_per_word); - err = -EINVAL; - goto setup_exit; - } - - /* Check if we can provide the requested rate */ - if (!sci->clk_from_cmu) { - u32 psr, speed; - - /* Max possible */ - speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); - - if (spi->max_speed_hz > speed) - spi->max_speed_hz = speed; - - psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1; - psr &= S3C64XX_SPI_PSR_MASK; - if (psr == S3C64XX_SPI_PSR_MASK) - psr--; - - speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); - if (spi->max_speed_hz < speed) { - if (psr+1 < S3C64XX_SPI_PSR_MASK) { - psr++; - } else { - err = -EINVAL; - goto setup_exit; - } - } - - speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); - if (spi->max_speed_hz >= speed) - spi->max_speed_hz = speed; - else - err = -EINVAL; - } - -setup_exit: - - /* setup() returns with device de-selected */ - disable_cs(sdd, spi); - - return err; -} - -static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) -{ - struct s3c64xx_spi_info *sci = sdd->cntrlr_info; - void __iomem *regs = sdd->regs; - unsigned int val; - - sdd->cur_speed = 0; - - S3C64XX_SPI_DEACT(sdd); - - /* Disable Interrupts - we use Polling if not DMA mode */ - writel(0, regs + S3C64XX_SPI_INT_EN); - - if (!sci->clk_from_cmu) - writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, - regs + S3C64XX_SPI_CLK_CFG); - writel(0, regs + S3C64XX_SPI_MODE_CFG); - writel(0, regs + S3C64XX_SPI_PACKET_CNT); - - /* Clear any irq pending bits */ - writel(readl(regs + S3C64XX_SPI_PENDING_CLR), - regs + S3C64XX_SPI_PENDING_CLR); - - writel(0, regs + S3C64XX_SPI_SWAP_CFG); - - val = readl(regs + S3C64XX_SPI_MODE_CFG); - val &= ~S3C64XX_SPI_MODE_4BURST; - val &= ~(S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); - val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); - writel(val, regs + S3C64XX_SPI_MODE_CFG); - - flush_fifo(sdd); -} - -static int __init s3c64xx_spi_probe(struct platform_device *pdev) -{ - struct resource *mem_res, *dmatx_res, *dmarx_res; - struct s3c64xx_spi_driver_data *sdd; - struct s3c64xx_spi_info *sci; - struct spi_master *master; - int ret; - - if (pdev->id < 0) { - dev_err(&pdev->dev, - "Invalid platform device id-%d\n", pdev->id); - return -ENODEV; - } - - if (pdev->dev.platform_data == NULL) { - dev_err(&pdev->dev, "platform_data missing!\n"); - return -ENODEV; - } - - sci = pdev->dev.platform_data; - if (!sci->src_clk_name) { - dev_err(&pdev->dev, - "Board init must call s3c64xx_spi_set_info()\n"); - return -EINVAL; - } - - /* Check for availability of necessary resource */ - - dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (dmatx_res == NULL) { - dev_err(&pdev->dev, "Unable to get SPI-Tx dma resource\n"); - return -ENXIO; - } - - dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (dmarx_res == NULL) { - dev_err(&pdev->dev, "Unable to get SPI-Rx dma resource\n"); - return -ENXIO; - } - - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (mem_res == NULL) { - dev_err(&pdev->dev, "Unable to get SPI MEM resource\n"); - return -ENXIO; - } - - master = spi_alloc_master(&pdev->dev, - sizeof(struct s3c64xx_spi_driver_data)); - if (master == NULL) { - dev_err(&pdev->dev, "Unable to allocate SPI Master\n"); - return -ENOMEM; - } - - platform_set_drvdata(pdev, master); - - sdd = spi_master_get_devdata(master); - sdd->master = master; - sdd->cntrlr_info = sci; - sdd->pdev = pdev; - sdd->sfr_start = mem_res->start; - sdd->tx_dmach = dmatx_res->start; - sdd->rx_dmach = dmarx_res->start; - - sdd->cur_bpw = 8; - - master->bus_num = pdev->id; - master->setup = s3c64xx_spi_setup; - master->transfer = s3c64xx_spi_transfer; - master->num_chipselect = sci->num_cs; - master->dma_alignment = 8; - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - - if (request_mem_region(mem_res->start, - resource_size(mem_res), pdev->name) == NULL) { - dev_err(&pdev->dev, "Req mem region failed\n"); - ret = -ENXIO; - goto err0; - } - - sdd->regs = ioremap(mem_res->start, resource_size(mem_res)); - if (sdd->regs == NULL) { - dev_err(&pdev->dev, "Unable to remap IO\n"); - ret = -ENXIO; - goto err1; - } - - if (sci->cfg_gpio == NULL || sci->cfg_gpio(pdev)) { - dev_err(&pdev->dev, "Unable to config gpio\n"); - ret = -EBUSY; - goto err2; - } - - /* Setup clocks */ - sdd->clk = clk_get(&pdev->dev, "spi"); - if (IS_ERR(sdd->clk)) { - dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n"); - ret = PTR_ERR(sdd->clk); - goto err3; - } - - if (clk_enable(sdd->clk)) { - dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n"); - ret = -EBUSY; - goto err4; - } - - sdd->src_clk = clk_get(&pdev->dev, sci->src_clk_name); - if (IS_ERR(sdd->src_clk)) { - dev_err(&pdev->dev, - "Unable to acquire clock '%s'\n", sci->src_clk_name); - ret = PTR_ERR(sdd->src_clk); - goto err5; - } - - if (clk_enable(sdd->src_clk)) { - dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", - sci->src_clk_name); - ret = -EBUSY; - goto err6; - } - - sdd->workqueue = create_singlethread_workqueue( - dev_name(master->dev.parent)); - if (sdd->workqueue == NULL) { - dev_err(&pdev->dev, "Unable to create workqueue\n"); - ret = -ENOMEM; - goto err7; - } - - /* Setup Deufult Mode */ - s3c64xx_spi_hwinit(sdd, pdev->id); - - spin_lock_init(&sdd->lock); - init_completion(&sdd->xfer_completion); - INIT_WORK(&sdd->work, s3c64xx_spi_work); - INIT_LIST_HEAD(&sdd->queue); - - if (spi_register_master(master)) { - dev_err(&pdev->dev, "cannot register SPI master\n"); - ret = -EBUSY; - goto err8; - } - - dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d " - "with %d Slaves attached\n", - pdev->id, master->num_chipselect); - dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n", - mem_res->end, mem_res->start, - sdd->rx_dmach, sdd->tx_dmach); - - return 0; - -err8: - destroy_workqueue(sdd->workqueue); -err7: - clk_disable(sdd->src_clk); -err6: - clk_put(sdd->src_clk); -err5: - clk_disable(sdd->clk); -err4: - clk_put(sdd->clk); -err3: -err2: - iounmap((void *) sdd->regs); -err1: - release_mem_region(mem_res->start, resource_size(mem_res)); -err0: - platform_set_drvdata(pdev, NULL); - spi_master_put(master); - - return ret; -} - -static int s3c64xx_spi_remove(struct platform_device *pdev) -{ - struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); - struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); - struct resource *mem_res; - unsigned long flags; - - spin_lock_irqsave(&sdd->lock, flags); - sdd->state |= SUSPND; - spin_unlock_irqrestore(&sdd->lock, flags); - - while (sdd->state & SPIBUSY) - msleep(10); - - spi_unregister_master(master); - - destroy_workqueue(sdd->workqueue); - - clk_disable(sdd->src_clk); - clk_put(sdd->src_clk); - - clk_disable(sdd->clk); - clk_put(sdd->clk); - - iounmap((void *) sdd->regs); - - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (mem_res != NULL) - release_mem_region(mem_res->start, resource_size(mem_res)); - - platform_set_drvdata(pdev, NULL); - spi_master_put(master); - - return 0; -} - -#ifdef CONFIG_PM -static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); - struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); - unsigned long flags; - - spin_lock_irqsave(&sdd->lock, flags); - sdd->state |= SUSPND; - spin_unlock_irqrestore(&sdd->lock, flags); - - while (sdd->state & SPIBUSY) - msleep(10); - - /* Disable the clock */ - clk_disable(sdd->src_clk); - clk_disable(sdd->clk); - - sdd->cur_speed = 0; /* Output Clock is stopped */ - - return 0; -} - -static int s3c64xx_spi_resume(struct platform_device *pdev) -{ - struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); - struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); - struct s3c64xx_spi_info *sci = sdd->cntrlr_info; - unsigned long flags; - - sci->cfg_gpio(pdev); - - /* Enable the clock */ - clk_enable(sdd->src_clk); - clk_enable(sdd->clk); - - s3c64xx_spi_hwinit(sdd, pdev->id); - - spin_lock_irqsave(&sdd->lock, flags); - sdd->state &= ~SUSPND; - spin_unlock_irqrestore(&sdd->lock, flags); - - return 0; -} -#else -#define s3c64xx_spi_suspend NULL -#define s3c64xx_spi_resume NULL -#endif /* CONFIG_PM */ - -static struct platform_driver s3c64xx_spi_driver = { - .driver = { - .name = "s3c64xx-spi", - .owner = THIS_MODULE, - }, - .remove = s3c64xx_spi_remove, - .suspend = s3c64xx_spi_suspend, - .resume = s3c64xx_spi_resume, -}; -MODULE_ALIAS("platform:s3c64xx-spi"); - -static int __init s3c64xx_spi_init(void) -{ - return platform_driver_probe(&s3c64xx_spi_driver, s3c64xx_spi_probe); -} -subsys_initcall(s3c64xx_spi_init); - -static void __exit s3c64xx_spi_exit(void) -{ - platform_driver_unregister(&s3c64xx_spi_driver); -} -module_exit(s3c64xx_spi_exit); - -MODULE_AUTHOR("Jaswinder Singh "); -MODULE_DESCRIPTION("S3C64XX SPI Controller Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_sh.c b/drivers/spi/spi_sh.c deleted file mode 100644 index 9eedd71ad898..000000000000 --- a/drivers/spi/spi_sh.c +++ /dev/null @@ -1,543 +0,0 @@ -/* - * SH SPI bus driver - * - * Copyright (C) 2011 Renesas Solutions Corp. - * - * Based on pxa2xx_spi.c: - * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define SPI_SH_TBR 0x00 -#define SPI_SH_RBR 0x00 -#define SPI_SH_CR1 0x08 -#define SPI_SH_CR2 0x10 -#define SPI_SH_CR3 0x18 -#define SPI_SH_CR4 0x20 -#define SPI_SH_CR5 0x28 - -/* CR1 */ -#define SPI_SH_TBE 0x80 -#define SPI_SH_TBF 0x40 -#define SPI_SH_RBE 0x20 -#define SPI_SH_RBF 0x10 -#define SPI_SH_PFONRD 0x08 -#define SPI_SH_SSDB 0x04 -#define SPI_SH_SSD 0x02 -#define SPI_SH_SSA 0x01 - -/* CR2 */ -#define SPI_SH_RSTF 0x80 -#define SPI_SH_LOOPBK 0x40 -#define SPI_SH_CPOL 0x20 -#define SPI_SH_CPHA 0x10 -#define SPI_SH_L1M0 0x08 - -/* CR3 */ -#define SPI_SH_MAX_BYTE 0xFF - -/* CR4 */ -#define SPI_SH_TBEI 0x80 -#define SPI_SH_TBFI 0x40 -#define SPI_SH_RBEI 0x20 -#define SPI_SH_RBFI 0x10 -#define SPI_SH_WPABRT 0x04 -#define SPI_SH_SSS 0x01 - -/* CR8 */ -#define SPI_SH_P1L0 0x80 -#define SPI_SH_PP1L0 0x40 -#define SPI_SH_MUXI 0x20 -#define SPI_SH_MUXIRQ 0x10 - -#define SPI_SH_FIFO_SIZE 32 -#define SPI_SH_SEND_TIMEOUT (3 * HZ) -#define SPI_SH_RECEIVE_TIMEOUT (HZ >> 3) - -#undef DEBUG - -struct spi_sh_data { - void __iomem *addr; - int irq; - struct spi_master *master; - struct list_head queue; - struct workqueue_struct *workqueue; - struct work_struct ws; - unsigned long cr1; - wait_queue_head_t wait; - spinlock_t lock; -}; - -static void spi_sh_write(struct spi_sh_data *ss, unsigned long data, - unsigned long offset) -{ - writel(data, ss->addr + offset); -} - -static unsigned long spi_sh_read(struct spi_sh_data *ss, unsigned long offset) -{ - return readl(ss->addr + offset); -} - -static void spi_sh_set_bit(struct spi_sh_data *ss, unsigned long val, - unsigned long offset) -{ - unsigned long tmp; - - tmp = spi_sh_read(ss, offset); - tmp |= val; - spi_sh_write(ss, tmp, offset); -} - -static void spi_sh_clear_bit(struct spi_sh_data *ss, unsigned long val, - unsigned long offset) -{ - unsigned long tmp; - - tmp = spi_sh_read(ss, offset); - tmp &= ~val; - spi_sh_write(ss, tmp, offset); -} - -static void clear_fifo(struct spi_sh_data *ss) -{ - spi_sh_set_bit(ss, SPI_SH_RSTF, SPI_SH_CR2); - spi_sh_clear_bit(ss, SPI_SH_RSTF, SPI_SH_CR2); -} - -static int spi_sh_wait_receive_buffer(struct spi_sh_data *ss) -{ - int timeout = 100000; - - while (spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_RBE) { - udelay(10); - if (timeout-- < 0) - return -ETIMEDOUT; - } - return 0; -} - -static int spi_sh_wait_write_buffer_empty(struct spi_sh_data *ss) -{ - int timeout = 100000; - - while (!(spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_TBE)) { - udelay(10); - if (timeout-- < 0) - return -ETIMEDOUT; - } - return 0; -} - -static int spi_sh_send(struct spi_sh_data *ss, struct spi_message *mesg, - struct spi_transfer *t) -{ - int i, retval = 0; - int remain = t->len; - int cur_len; - unsigned char *data; - unsigned long tmp; - long ret; - - if (t->len) - spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1); - - data = (unsigned char *)t->tx_buf; - while (remain > 0) { - cur_len = min(SPI_SH_FIFO_SIZE, remain); - for (i = 0; i < cur_len && - !(spi_sh_read(ss, SPI_SH_CR4) & - SPI_SH_WPABRT) && - !(spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_TBF); - i++) - spi_sh_write(ss, (unsigned long)data[i], SPI_SH_TBR); - - if (spi_sh_read(ss, SPI_SH_CR4) & SPI_SH_WPABRT) { - /* Abort SPI operation */ - spi_sh_set_bit(ss, SPI_SH_WPABRT, SPI_SH_CR4); - retval = -EIO; - break; - } - - cur_len = i; - - remain -= cur_len; - data += cur_len; - - if (remain > 0) { - ss->cr1 &= ~SPI_SH_TBE; - spi_sh_set_bit(ss, SPI_SH_TBE, SPI_SH_CR4); - ret = wait_event_interruptible_timeout(ss->wait, - ss->cr1 & SPI_SH_TBE, - SPI_SH_SEND_TIMEOUT); - if (ret == 0 && !(ss->cr1 & SPI_SH_TBE)) { - printk(KERN_ERR "%s: timeout\n", __func__); - return -ETIMEDOUT; - } - } - } - - if (list_is_last(&t->transfer_list, &mesg->transfers)) { - tmp = spi_sh_read(ss, SPI_SH_CR1); - tmp = tmp & ~(SPI_SH_SSD | SPI_SH_SSDB); - spi_sh_write(ss, tmp, SPI_SH_CR1); - spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1); - - ss->cr1 &= ~SPI_SH_TBE; - spi_sh_set_bit(ss, SPI_SH_TBE, SPI_SH_CR4); - ret = wait_event_interruptible_timeout(ss->wait, - ss->cr1 & SPI_SH_TBE, - SPI_SH_SEND_TIMEOUT); - if (ret == 0 && (ss->cr1 & SPI_SH_TBE)) { - printk(KERN_ERR "%s: timeout\n", __func__); - return -ETIMEDOUT; - } - } - - return retval; -} - -static int spi_sh_receive(struct spi_sh_data *ss, struct spi_message *mesg, - struct spi_transfer *t) -{ - int i; - int remain = t->len; - int cur_len; - unsigned char *data; - unsigned long tmp; - long ret; - - if (t->len > SPI_SH_MAX_BYTE) - spi_sh_write(ss, SPI_SH_MAX_BYTE, SPI_SH_CR3); - else - spi_sh_write(ss, t->len, SPI_SH_CR3); - - tmp = spi_sh_read(ss, SPI_SH_CR1); - tmp = tmp & ~(SPI_SH_SSD | SPI_SH_SSDB); - spi_sh_write(ss, tmp, SPI_SH_CR1); - spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1); - - spi_sh_wait_write_buffer_empty(ss); - - data = (unsigned char *)t->rx_buf; - while (remain > 0) { - if (remain >= SPI_SH_FIFO_SIZE) { - ss->cr1 &= ~SPI_SH_RBF; - spi_sh_set_bit(ss, SPI_SH_RBF, SPI_SH_CR4); - ret = wait_event_interruptible_timeout(ss->wait, - ss->cr1 & SPI_SH_RBF, - SPI_SH_RECEIVE_TIMEOUT); - if (ret == 0 && - spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_RBE) { - printk(KERN_ERR "%s: timeout\n", __func__); - return -ETIMEDOUT; - } - } - - cur_len = min(SPI_SH_FIFO_SIZE, remain); - for (i = 0; i < cur_len; i++) { - if (spi_sh_wait_receive_buffer(ss)) - break; - data[i] = (unsigned char)spi_sh_read(ss, SPI_SH_RBR); - } - - remain -= cur_len; - data += cur_len; - } - - /* deassert CS when SPI is receiving. */ - if (t->len > SPI_SH_MAX_BYTE) { - clear_fifo(ss); - spi_sh_write(ss, 1, SPI_SH_CR3); - } else { - spi_sh_write(ss, 0, SPI_SH_CR3); - } - - return 0; -} - -static void spi_sh_work(struct work_struct *work) -{ - struct spi_sh_data *ss = container_of(work, struct spi_sh_data, ws); - struct spi_message *mesg; - struct spi_transfer *t; - unsigned long flags; - int ret; - - pr_debug("%s: enter\n", __func__); - - spin_lock_irqsave(&ss->lock, flags); - while (!list_empty(&ss->queue)) { - mesg = list_entry(ss->queue.next, struct spi_message, queue); - list_del_init(&mesg->queue); - - spin_unlock_irqrestore(&ss->lock, flags); - list_for_each_entry(t, &mesg->transfers, transfer_list) { - pr_debug("tx_buf = %p, rx_buf = %p\n", - t->tx_buf, t->rx_buf); - pr_debug("len = %d, delay_usecs = %d\n", - t->len, t->delay_usecs); - - if (t->tx_buf) { - ret = spi_sh_send(ss, mesg, t); - if (ret < 0) - goto error; - } - if (t->rx_buf) { - ret = spi_sh_receive(ss, mesg, t); - if (ret < 0) - goto error; - } - mesg->actual_length += t->len; - } - spin_lock_irqsave(&ss->lock, flags); - - mesg->status = 0; - mesg->complete(mesg->context); - } - - clear_fifo(ss); - spi_sh_set_bit(ss, SPI_SH_SSD, SPI_SH_CR1); - udelay(100); - - spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD, - SPI_SH_CR1); - - clear_fifo(ss); - - spin_unlock_irqrestore(&ss->lock, flags); - - return; - - error: - mesg->status = ret; - mesg->complete(mesg->context); - - spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD, - SPI_SH_CR1); - clear_fifo(ss); - -} - -static int spi_sh_setup(struct spi_device *spi) -{ - struct spi_sh_data *ss = spi_master_get_devdata(spi->master); - - if (!spi->bits_per_word) - spi->bits_per_word = 8; - - pr_debug("%s: enter\n", __func__); - - spi_sh_write(ss, 0xfe, SPI_SH_CR1); /* SPI sycle stop */ - spi_sh_write(ss, 0x00, SPI_SH_CR1); /* CR1 init */ - spi_sh_write(ss, 0x00, SPI_SH_CR3); /* CR3 init */ - - clear_fifo(ss); - - /* 1/8 clock */ - spi_sh_write(ss, spi_sh_read(ss, SPI_SH_CR2) | 0x07, SPI_SH_CR2); - udelay(10); - - return 0; -} - -static int spi_sh_transfer(struct spi_device *spi, struct spi_message *mesg) -{ - struct spi_sh_data *ss = spi_master_get_devdata(spi->master); - unsigned long flags; - - pr_debug("%s: enter\n", __func__); - pr_debug("\tmode = %02x\n", spi->mode); - - spin_lock_irqsave(&ss->lock, flags); - - mesg->actual_length = 0; - mesg->status = -EINPROGRESS; - - spi_sh_clear_bit(ss, SPI_SH_SSA, SPI_SH_CR1); - - list_add_tail(&mesg->queue, &ss->queue); - queue_work(ss->workqueue, &ss->ws); - - spin_unlock_irqrestore(&ss->lock, flags); - - return 0; -} - -static void spi_sh_cleanup(struct spi_device *spi) -{ - struct spi_sh_data *ss = spi_master_get_devdata(spi->master); - - pr_debug("%s: enter\n", __func__); - - spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD, - SPI_SH_CR1); -} - -static irqreturn_t spi_sh_irq(int irq, void *_ss) -{ - struct spi_sh_data *ss = (struct spi_sh_data *)_ss; - unsigned long cr1; - - cr1 = spi_sh_read(ss, SPI_SH_CR1); - if (cr1 & SPI_SH_TBE) - ss->cr1 |= SPI_SH_TBE; - if (cr1 & SPI_SH_TBF) - ss->cr1 |= SPI_SH_TBF; - if (cr1 & SPI_SH_RBE) - ss->cr1 |= SPI_SH_RBE; - if (cr1 & SPI_SH_RBF) - ss->cr1 |= SPI_SH_RBF; - - if (ss->cr1) { - spi_sh_clear_bit(ss, ss->cr1, SPI_SH_CR4); - wake_up(&ss->wait); - } - - return IRQ_HANDLED; -} - -static int __devexit spi_sh_remove(struct platform_device *pdev) -{ - struct spi_sh_data *ss = dev_get_drvdata(&pdev->dev); - - spi_unregister_master(ss->master); - destroy_workqueue(ss->workqueue); - free_irq(ss->irq, ss); - iounmap(ss->addr); - - return 0; -} - -static int __devinit spi_sh_probe(struct platform_device *pdev) -{ - struct resource *res; - struct spi_master *master; - struct spi_sh_data *ss; - int ret, irq; - - /* get base addr */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(res == NULL)) { - dev_err(&pdev->dev, "invalid resource\n"); - return -EINVAL; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "platform_get_irq error\n"); - return -ENODEV; - } - - master = spi_alloc_master(&pdev->dev, sizeof(struct spi_sh_data)); - if (master == NULL) { - dev_err(&pdev->dev, "spi_alloc_master error.\n"); - return -ENOMEM; - } - - ss = spi_master_get_devdata(master); - dev_set_drvdata(&pdev->dev, ss); - - ss->irq = irq; - ss->master = master; - ss->addr = ioremap(res->start, resource_size(res)); - if (ss->addr == NULL) { - dev_err(&pdev->dev, "ioremap error.\n"); - ret = -ENOMEM; - goto error1; - } - INIT_LIST_HEAD(&ss->queue); - spin_lock_init(&ss->lock); - INIT_WORK(&ss->ws, spi_sh_work); - init_waitqueue_head(&ss->wait); - ss->workqueue = create_singlethread_workqueue( - dev_name(master->dev.parent)); - if (ss->workqueue == NULL) { - dev_err(&pdev->dev, "create workqueue error\n"); - ret = -EBUSY; - goto error2; - } - - ret = request_irq(irq, spi_sh_irq, IRQF_DISABLED, "spi_sh", ss); - if (ret < 0) { - dev_err(&pdev->dev, "request_irq error\n"); - goto error3; - } - - master->num_chipselect = 2; - master->bus_num = pdev->id; - master->setup = spi_sh_setup; - master->transfer = spi_sh_transfer; - master->cleanup = spi_sh_cleanup; - - ret = spi_register_master(master); - if (ret < 0) { - printk(KERN_ERR "spi_register_master error.\n"); - goto error4; - } - - return 0; - - error4: - free_irq(irq, ss); - error3: - destroy_workqueue(ss->workqueue); - error2: - iounmap(ss->addr); - error1: - spi_master_put(master); - - return ret; -} - -static struct platform_driver spi_sh_driver = { - .probe = spi_sh_probe, - .remove = __devexit_p(spi_sh_remove), - .driver = { - .name = "sh_spi", - .owner = THIS_MODULE, - }, -}; - -static int __init spi_sh_init(void) -{ - return platform_driver_register(&spi_sh_driver); -} -module_init(spi_sh_init); - -static void __exit spi_sh_exit(void) -{ - platform_driver_unregister(&spi_sh_driver); -} -module_exit(spi_sh_exit); - -MODULE_DESCRIPTION("SH SPI bus driver"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Yoshihiro Shimoda"); -MODULE_ALIAS("platform:sh_spi"); diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi_sh_msiof.c deleted file mode 100644 index e00d94b22250..000000000000 --- a/drivers/spi/spi_sh_msiof.c +++ /dev/null @@ -1,749 +0,0 @@ -/* - * SuperH MSIOF SPI Master Interface - * - * Copyright (c) 2009 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -struct sh_msiof_spi_priv { - struct spi_bitbang bitbang; /* must be first for spi_bitbang.c */ - void __iomem *mapbase; - struct clk *clk; - struct platform_device *pdev; - struct sh_msiof_spi_info *info; - struct completion done; - unsigned long flags; - int tx_fifo_size; - int rx_fifo_size; -}; - -#define TMDR1 0x00 -#define TMDR2 0x04 -#define TMDR3 0x08 -#define RMDR1 0x10 -#define RMDR2 0x14 -#define RMDR3 0x18 -#define TSCR 0x20 -#define RSCR 0x22 -#define CTR 0x28 -#define FCTR 0x30 -#define STR 0x40 -#define IER 0x44 -#define TDR1 0x48 -#define TDR2 0x4c -#define TFDR 0x50 -#define RDR1 0x58 -#define RDR2 0x5c -#define RFDR 0x60 - -#define CTR_TSCKE (1 << 15) -#define CTR_TFSE (1 << 14) -#define CTR_TXE (1 << 9) -#define CTR_RXE (1 << 8) - -#define STR_TEOF (1 << 23) -#define STR_REOF (1 << 7) - -static u32 sh_msiof_read(struct sh_msiof_spi_priv *p, int reg_offs) -{ - switch (reg_offs) { - case TSCR: - case RSCR: - return ioread16(p->mapbase + reg_offs); - default: - return ioread32(p->mapbase + reg_offs); - } -} - -static void sh_msiof_write(struct sh_msiof_spi_priv *p, int reg_offs, - u32 value) -{ - switch (reg_offs) { - case TSCR: - case RSCR: - iowrite16(value, p->mapbase + reg_offs); - break; - default: - iowrite32(value, p->mapbase + reg_offs); - break; - } -} - -static int sh_msiof_modify_ctr_wait(struct sh_msiof_spi_priv *p, - u32 clr, u32 set) -{ - u32 mask = clr | set; - u32 data; - int k; - - data = sh_msiof_read(p, CTR); - data &= ~clr; - data |= set; - sh_msiof_write(p, CTR, data); - - for (k = 100; k > 0; k--) { - if ((sh_msiof_read(p, CTR) & mask) == set) - break; - - udelay(10); - } - - return k > 0 ? 0 : -ETIMEDOUT; -} - -static irqreturn_t sh_msiof_spi_irq(int irq, void *data) -{ - struct sh_msiof_spi_priv *p = data; - - /* just disable the interrupt and wake up */ - sh_msiof_write(p, IER, 0); - complete(&p->done); - - return IRQ_HANDLED; -} - -static struct { - unsigned short div; - unsigned short scr; -} const sh_msiof_spi_clk_table[] = { - { 1, 0x0007 }, - { 2, 0x0000 }, - { 4, 0x0001 }, - { 8, 0x0002 }, - { 16, 0x0003 }, - { 32, 0x0004 }, - { 64, 0x1f00 }, - { 128, 0x1f01 }, - { 256, 0x1f02 }, - { 512, 0x1f03 }, - { 1024, 0x1f04 }, -}; - -static void sh_msiof_spi_set_clk_regs(struct sh_msiof_spi_priv *p, - unsigned long parent_rate, - unsigned long spi_hz) -{ - unsigned long div = 1024; - size_t k; - - if (!WARN_ON(!spi_hz || !parent_rate)) - div = parent_rate / spi_hz; - - /* TODO: make more fine grained */ - - for (k = 0; k < ARRAY_SIZE(sh_msiof_spi_clk_table); k++) { - if (sh_msiof_spi_clk_table[k].div >= div) - break; - } - - k = min_t(int, k, ARRAY_SIZE(sh_msiof_spi_clk_table) - 1); - - sh_msiof_write(p, TSCR, sh_msiof_spi_clk_table[k].scr); - sh_msiof_write(p, RSCR, sh_msiof_spi_clk_table[k].scr); -} - -static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p, - u32 cpol, u32 cpha, - u32 tx_hi_z, u32 lsb_first) -{ - u32 tmp; - int edge; - - /* - * CPOL CPHA TSCKIZ RSCKIZ TEDG REDG - * 0 0 10 10 1 1 - * 0 1 10 10 0 0 - * 1 0 11 11 0 0 - * 1 1 11 11 1 1 - */ - sh_msiof_write(p, FCTR, 0); - sh_msiof_write(p, TMDR1, 0xe2000005 | (lsb_first << 24)); - sh_msiof_write(p, RMDR1, 0x22000005 | (lsb_first << 24)); - - tmp = 0xa0000000; - tmp |= cpol << 30; /* TSCKIZ */ - tmp |= cpol << 28; /* RSCKIZ */ - - edge = cpol ^ !cpha; - - tmp |= edge << 27; /* TEDG */ - tmp |= edge << 26; /* REDG */ - tmp |= (tx_hi_z ? 2 : 0) << 22; /* TXDIZ */ - sh_msiof_write(p, CTR, tmp); -} - -static void sh_msiof_spi_set_mode_regs(struct sh_msiof_spi_priv *p, - const void *tx_buf, void *rx_buf, - u32 bits, u32 words) -{ - u32 dr2 = ((bits - 1) << 24) | ((words - 1) << 16); - - if (tx_buf) - sh_msiof_write(p, TMDR2, dr2); - else - sh_msiof_write(p, TMDR2, dr2 | 1); - - if (rx_buf) - sh_msiof_write(p, RMDR2, dr2); - - sh_msiof_write(p, IER, STR_TEOF | STR_REOF); -} - -static void sh_msiof_reset_str(struct sh_msiof_spi_priv *p) -{ - sh_msiof_write(p, STR, sh_msiof_read(p, STR)); -} - -static void sh_msiof_spi_write_fifo_8(struct sh_msiof_spi_priv *p, - const void *tx_buf, int words, int fs) -{ - const u8 *buf_8 = tx_buf; - int k; - - for (k = 0; k < words; k++) - sh_msiof_write(p, TFDR, buf_8[k] << fs); -} - -static void sh_msiof_spi_write_fifo_16(struct sh_msiof_spi_priv *p, - const void *tx_buf, int words, int fs) -{ - const u16 *buf_16 = tx_buf; - int k; - - for (k = 0; k < words; k++) - sh_msiof_write(p, TFDR, buf_16[k] << fs); -} - -static void sh_msiof_spi_write_fifo_16u(struct sh_msiof_spi_priv *p, - const void *tx_buf, int words, int fs) -{ - const u16 *buf_16 = tx_buf; - int k; - - for (k = 0; k < words; k++) - sh_msiof_write(p, TFDR, get_unaligned(&buf_16[k]) << fs); -} - -static void sh_msiof_spi_write_fifo_32(struct sh_msiof_spi_priv *p, - const void *tx_buf, int words, int fs) -{ - const u32 *buf_32 = tx_buf; - int k; - - for (k = 0; k < words; k++) - sh_msiof_write(p, TFDR, buf_32[k] << fs); -} - -static void sh_msiof_spi_write_fifo_32u(struct sh_msiof_spi_priv *p, - const void *tx_buf, int words, int fs) -{ - const u32 *buf_32 = tx_buf; - int k; - - for (k = 0; k < words; k++) - sh_msiof_write(p, TFDR, get_unaligned(&buf_32[k]) << fs); -} - -static void sh_msiof_spi_write_fifo_s32(struct sh_msiof_spi_priv *p, - const void *tx_buf, int words, int fs) -{ - const u32 *buf_32 = tx_buf; - int k; - - for (k = 0; k < words; k++) - sh_msiof_write(p, TFDR, swab32(buf_32[k] << fs)); -} - -static void sh_msiof_spi_write_fifo_s32u(struct sh_msiof_spi_priv *p, - const void *tx_buf, int words, int fs) -{ - const u32 *buf_32 = tx_buf; - int k; - - for (k = 0; k < words; k++) - sh_msiof_write(p, TFDR, swab32(get_unaligned(&buf_32[k]) << fs)); -} - -static void sh_msiof_spi_read_fifo_8(struct sh_msiof_spi_priv *p, - void *rx_buf, int words, int fs) -{ - u8 *buf_8 = rx_buf; - int k; - - for (k = 0; k < words; k++) - buf_8[k] = sh_msiof_read(p, RFDR) >> fs; -} - -static void sh_msiof_spi_read_fifo_16(struct sh_msiof_spi_priv *p, - void *rx_buf, int words, int fs) -{ - u16 *buf_16 = rx_buf; - int k; - - for (k = 0; k < words; k++) - buf_16[k] = sh_msiof_read(p, RFDR) >> fs; -} - -static void sh_msiof_spi_read_fifo_16u(struct sh_msiof_spi_priv *p, - void *rx_buf, int words, int fs) -{ - u16 *buf_16 = rx_buf; - int k; - - for (k = 0; k < words; k++) - put_unaligned(sh_msiof_read(p, RFDR) >> fs, &buf_16[k]); -} - -static void sh_msiof_spi_read_fifo_32(struct sh_msiof_spi_priv *p, - void *rx_buf, int words, int fs) -{ - u32 *buf_32 = rx_buf; - int k; - - for (k = 0; k < words; k++) - buf_32[k] = sh_msiof_read(p, RFDR) >> fs; -} - -static void sh_msiof_spi_read_fifo_32u(struct sh_msiof_spi_priv *p, - void *rx_buf, int words, int fs) -{ - u32 *buf_32 = rx_buf; - int k; - - for (k = 0; k < words; k++) - put_unaligned(sh_msiof_read(p, RFDR) >> fs, &buf_32[k]); -} - -static void sh_msiof_spi_read_fifo_s32(struct sh_msiof_spi_priv *p, - void *rx_buf, int words, int fs) -{ - u32 *buf_32 = rx_buf; - int k; - - for (k = 0; k < words; k++) - buf_32[k] = swab32(sh_msiof_read(p, RFDR) >> fs); -} - -static void sh_msiof_spi_read_fifo_s32u(struct sh_msiof_spi_priv *p, - void *rx_buf, int words, int fs) -{ - u32 *buf_32 = rx_buf; - int k; - - for (k = 0; k < words; k++) - put_unaligned(swab32(sh_msiof_read(p, RFDR) >> fs), &buf_32[k]); -} - -static int sh_msiof_spi_bits(struct spi_device *spi, struct spi_transfer *t) -{ - int bits; - - bits = t ? t->bits_per_word : 0; - if (!bits) - bits = spi->bits_per_word; - return bits; -} - -static unsigned long sh_msiof_spi_hz(struct spi_device *spi, - struct spi_transfer *t) -{ - unsigned long hz; - - hz = t ? t->speed_hz : 0; - if (!hz) - hz = spi->max_speed_hz; - return hz; -} - -static int sh_msiof_spi_setup_transfer(struct spi_device *spi, - struct spi_transfer *t) -{ - int bits; - - /* noting to check hz values against since parent clock is disabled */ - - bits = sh_msiof_spi_bits(spi, t); - if (bits < 8) - return -EINVAL; - if (bits > 32) - return -EINVAL; - - return spi_bitbang_setup_transfer(spi, t); -} - -static void sh_msiof_spi_chipselect(struct spi_device *spi, int is_on) -{ - struct sh_msiof_spi_priv *p = spi_master_get_devdata(spi->master); - int value; - - /* chip select is active low unless SPI_CS_HIGH is set */ - if (spi->mode & SPI_CS_HIGH) - value = (is_on == BITBANG_CS_ACTIVE) ? 1 : 0; - else - value = (is_on == BITBANG_CS_ACTIVE) ? 0 : 1; - - if (is_on == BITBANG_CS_ACTIVE) { - if (!test_and_set_bit(0, &p->flags)) { - pm_runtime_get_sync(&p->pdev->dev); - clk_enable(p->clk); - } - - /* Configure pins before asserting CS */ - sh_msiof_spi_set_pin_regs(p, !!(spi->mode & SPI_CPOL), - !!(spi->mode & SPI_CPHA), - !!(spi->mode & SPI_3WIRE), - !!(spi->mode & SPI_LSB_FIRST)); - } - - /* use spi->controller data for CS (same strategy as spi_gpio) */ - gpio_set_value((unsigned)spi->controller_data, value); - - if (is_on == BITBANG_CS_INACTIVE) { - if (test_and_clear_bit(0, &p->flags)) { - clk_disable(p->clk); - pm_runtime_put(&p->pdev->dev); - } - } -} - -static int sh_msiof_spi_txrx_once(struct sh_msiof_spi_priv *p, - void (*tx_fifo)(struct sh_msiof_spi_priv *, - const void *, int, int), - void (*rx_fifo)(struct sh_msiof_spi_priv *, - void *, int, int), - const void *tx_buf, void *rx_buf, - int words, int bits) -{ - int fifo_shift; - int ret; - - /* limit maximum word transfer to rx/tx fifo size */ - if (tx_buf) - words = min_t(int, words, p->tx_fifo_size); - if (rx_buf) - words = min_t(int, words, p->rx_fifo_size); - - /* the fifo contents need shifting */ - fifo_shift = 32 - bits; - - /* setup msiof transfer mode registers */ - sh_msiof_spi_set_mode_regs(p, tx_buf, rx_buf, bits, words); - - /* write tx fifo */ - if (tx_buf) - tx_fifo(p, tx_buf, words, fifo_shift); - - /* setup clock and rx/tx signals */ - ret = sh_msiof_modify_ctr_wait(p, 0, CTR_TSCKE); - if (rx_buf) - ret = ret ? ret : sh_msiof_modify_ctr_wait(p, 0, CTR_RXE); - ret = ret ? ret : sh_msiof_modify_ctr_wait(p, 0, CTR_TXE); - - /* start by setting frame bit */ - INIT_COMPLETION(p->done); - ret = ret ? ret : sh_msiof_modify_ctr_wait(p, 0, CTR_TFSE); - if (ret) { - dev_err(&p->pdev->dev, "failed to start hardware\n"); - goto err; - } - - /* wait for tx fifo to be emptied / rx fifo to be filled */ - wait_for_completion(&p->done); - - /* read rx fifo */ - if (rx_buf) - rx_fifo(p, rx_buf, words, fifo_shift); - - /* clear status bits */ - sh_msiof_reset_str(p); - - /* shut down frame, tx/tx and clock signals */ - ret = sh_msiof_modify_ctr_wait(p, CTR_TFSE, 0); - ret = ret ? ret : sh_msiof_modify_ctr_wait(p, CTR_TXE, 0); - if (rx_buf) - ret = ret ? ret : sh_msiof_modify_ctr_wait(p, CTR_RXE, 0); - ret = ret ? ret : sh_msiof_modify_ctr_wait(p, CTR_TSCKE, 0); - if (ret) { - dev_err(&p->pdev->dev, "failed to shut down hardware\n"); - goto err; - } - - return words; - - err: - sh_msiof_write(p, IER, 0); - return ret; -} - -static int sh_msiof_spi_txrx(struct spi_device *spi, struct spi_transfer *t) -{ - struct sh_msiof_spi_priv *p = spi_master_get_devdata(spi->master); - void (*tx_fifo)(struct sh_msiof_spi_priv *, const void *, int, int); - void (*rx_fifo)(struct sh_msiof_spi_priv *, void *, int, int); - int bits; - int bytes_per_word; - int bytes_done; - int words; - int n; - bool swab; - - bits = sh_msiof_spi_bits(spi, t); - - if (bits <= 8 && t->len > 15 && !(t->len & 3)) { - bits = 32; - swab = true; - } else { - swab = false; - } - - /* setup bytes per word and fifo read/write functions */ - if (bits <= 8) { - bytes_per_word = 1; - tx_fifo = sh_msiof_spi_write_fifo_8; - rx_fifo = sh_msiof_spi_read_fifo_8; - } else if (bits <= 16) { - bytes_per_word = 2; - if ((unsigned long)t->tx_buf & 0x01) - tx_fifo = sh_msiof_spi_write_fifo_16u; - else - tx_fifo = sh_msiof_spi_write_fifo_16; - - if ((unsigned long)t->rx_buf & 0x01) - rx_fifo = sh_msiof_spi_read_fifo_16u; - else - rx_fifo = sh_msiof_spi_read_fifo_16; - } else if (swab) { - bytes_per_word = 4; - if ((unsigned long)t->tx_buf & 0x03) - tx_fifo = sh_msiof_spi_write_fifo_s32u; - else - tx_fifo = sh_msiof_spi_write_fifo_s32; - - if ((unsigned long)t->rx_buf & 0x03) - rx_fifo = sh_msiof_spi_read_fifo_s32u; - else - rx_fifo = sh_msiof_spi_read_fifo_s32; - } else { - bytes_per_word = 4; - if ((unsigned long)t->tx_buf & 0x03) - tx_fifo = sh_msiof_spi_write_fifo_32u; - else - tx_fifo = sh_msiof_spi_write_fifo_32; - - if ((unsigned long)t->rx_buf & 0x03) - rx_fifo = sh_msiof_spi_read_fifo_32u; - else - rx_fifo = sh_msiof_spi_read_fifo_32; - } - - /* setup clocks (clock already enabled in chipselect()) */ - sh_msiof_spi_set_clk_regs(p, clk_get_rate(p->clk), - sh_msiof_spi_hz(spi, t)); - - /* transfer in fifo sized chunks */ - words = t->len / bytes_per_word; - bytes_done = 0; - - while (bytes_done < t->len) { - void *rx_buf = t->rx_buf ? t->rx_buf + bytes_done : NULL; - const void *tx_buf = t->tx_buf ? t->tx_buf + bytes_done : NULL; - n = sh_msiof_spi_txrx_once(p, tx_fifo, rx_fifo, - tx_buf, - rx_buf, - words, bits); - if (n < 0) - break; - - bytes_done += n * bytes_per_word; - words -= n; - } - - return bytes_done; -} - -static u32 sh_msiof_spi_txrx_word(struct spi_device *spi, unsigned nsecs, - u32 word, u8 bits) -{ - BUG(); /* unused but needed by bitbang code */ - return 0; -} - -static int sh_msiof_spi_probe(struct platform_device *pdev) -{ - struct resource *r; - struct spi_master *master; - struct sh_msiof_spi_priv *p; - char clk_name[16]; - int i; - int ret; - - master = spi_alloc_master(&pdev->dev, sizeof(struct sh_msiof_spi_priv)); - if (master == NULL) { - dev_err(&pdev->dev, "failed to allocate spi master\n"); - ret = -ENOMEM; - goto err0; - } - - p = spi_master_get_devdata(master); - - platform_set_drvdata(pdev, p); - p->info = pdev->dev.platform_data; - init_completion(&p->done); - - snprintf(clk_name, sizeof(clk_name), "msiof%d", pdev->id); - p->clk = clk_get(&pdev->dev, clk_name); - if (IS_ERR(p->clk)) { - dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); - ret = PTR_ERR(p->clk); - goto err1; - } - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - i = platform_get_irq(pdev, 0); - if (!r || i < 0) { - dev_err(&pdev->dev, "cannot get platform resources\n"); - ret = -ENOENT; - goto err2; - } - p->mapbase = ioremap_nocache(r->start, resource_size(r)); - if (!p->mapbase) { - dev_err(&pdev->dev, "unable to ioremap\n"); - ret = -ENXIO; - goto err2; - } - - ret = request_irq(i, sh_msiof_spi_irq, IRQF_DISABLED, - dev_name(&pdev->dev), p); - if (ret) { - dev_err(&pdev->dev, "unable to request irq\n"); - goto err3; - } - - p->pdev = pdev; - pm_runtime_enable(&pdev->dev); - - /* The standard version of MSIOF use 64 word FIFOs */ - p->tx_fifo_size = 64; - p->rx_fifo_size = 64; - - /* Platform data may override FIFO sizes */ - if (p->info->tx_fifo_override) - p->tx_fifo_size = p->info->tx_fifo_override; - if (p->info->rx_fifo_override) - p->rx_fifo_size = p->info->rx_fifo_override; - - /* init master and bitbang code */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - master->mode_bits |= SPI_LSB_FIRST | SPI_3WIRE; - master->flags = 0; - master->bus_num = pdev->id; - master->num_chipselect = p->info->num_chipselect; - master->setup = spi_bitbang_setup; - master->cleanup = spi_bitbang_cleanup; - - p->bitbang.master = master; - p->bitbang.chipselect = sh_msiof_spi_chipselect; - p->bitbang.setup_transfer = sh_msiof_spi_setup_transfer; - p->bitbang.txrx_bufs = sh_msiof_spi_txrx; - p->bitbang.txrx_word[SPI_MODE_0] = sh_msiof_spi_txrx_word; - p->bitbang.txrx_word[SPI_MODE_1] = sh_msiof_spi_txrx_word; - p->bitbang.txrx_word[SPI_MODE_2] = sh_msiof_spi_txrx_word; - p->bitbang.txrx_word[SPI_MODE_3] = sh_msiof_spi_txrx_word; - - ret = spi_bitbang_start(&p->bitbang); - if (ret == 0) - return 0; - - pm_runtime_disable(&pdev->dev); - err3: - iounmap(p->mapbase); - err2: - clk_put(p->clk); - err1: - spi_master_put(master); - err0: - return ret; -} - -static int sh_msiof_spi_remove(struct platform_device *pdev) -{ - struct sh_msiof_spi_priv *p = platform_get_drvdata(pdev); - int ret; - - ret = spi_bitbang_stop(&p->bitbang); - if (!ret) { - pm_runtime_disable(&pdev->dev); - free_irq(platform_get_irq(pdev, 0), p); - iounmap(p->mapbase); - clk_put(p->clk); - spi_master_put(p->bitbang.master); - } - return ret; -} - -static int sh_msiof_spi_runtime_nop(struct device *dev) -{ - /* Runtime PM callback shared between ->runtime_suspend() - * and ->runtime_resume(). Simply returns success. - * - * This driver re-initializes all registers after - * pm_runtime_get_sync() anyway so there is no need - * to save and restore registers here. - */ - return 0; -} - -static struct dev_pm_ops sh_msiof_spi_dev_pm_ops = { - .runtime_suspend = sh_msiof_spi_runtime_nop, - .runtime_resume = sh_msiof_spi_runtime_nop, -}; - -static struct platform_driver sh_msiof_spi_drv = { - .probe = sh_msiof_spi_probe, - .remove = sh_msiof_spi_remove, - .driver = { - .name = "spi_sh_msiof", - .owner = THIS_MODULE, - .pm = &sh_msiof_spi_dev_pm_ops, - }, -}; - -static int __init sh_msiof_spi_init(void) -{ - return platform_driver_register(&sh_msiof_spi_drv); -} -module_init(sh_msiof_spi_init); - -static void __exit sh_msiof_spi_exit(void) -{ - platform_driver_unregister(&sh_msiof_spi_drv); -} -module_exit(sh_msiof_spi_exit); - -MODULE_DESCRIPTION("SuperH MSIOF SPI Master Interface Driver"); -MODULE_AUTHOR("Magnus Damm"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:spi_sh_msiof"); diff --git a/drivers/spi/spi_sh_sci.c b/drivers/spi/spi_sh_sci.c deleted file mode 100644 index 5c6439161199..000000000000 --- a/drivers/spi/spi_sh_sci.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * SH SCI SPI interface - * - * Copyright (c) 2008 Magnus Damm - * - * Based on S3C24XX GPIO based SPI driver, which is: - * Copyright (c) 2006 Ben Dooks - * Copyright (c) 2006 Simtec Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -struct sh_sci_spi { - struct spi_bitbang bitbang; - - void __iomem *membase; - unsigned char val; - struct sh_spi_info *info; - struct platform_device *dev; -}; - -#define SCSPTR(sp) (sp->membase + 0x1c) -#define PIN_SCK (1 << 2) -#define PIN_TXD (1 << 0) -#define PIN_RXD PIN_TXD -#define PIN_INIT ((1 << 1) | (1 << 3) | PIN_SCK | PIN_TXD) - -static inline void setbits(struct sh_sci_spi *sp, int bits, int on) -{ - /* - * We are the only user of SCSPTR so no locking is required. - * Reading bit 2 and 0 in SCSPTR gives pin state as input. - * Writing the same bits sets the output value. - * This makes regular read-modify-write difficult so we - * use sp->val to keep track of the latest register value. - */ - - if (on) - sp->val |= bits; - else - sp->val &= ~bits; - - iowrite8(sp->val, SCSPTR(sp)); -} - -static inline void setsck(struct spi_device *dev, int on) -{ - setbits(spi_master_get_devdata(dev->master), PIN_SCK, on); -} - -static inline void setmosi(struct spi_device *dev, int on) -{ - setbits(spi_master_get_devdata(dev->master), PIN_TXD, on); -} - -static inline u32 getmiso(struct spi_device *dev) -{ - struct sh_sci_spi *sp = spi_master_get_devdata(dev->master); - - return (ioread8(SCSPTR(sp)) & PIN_RXD) ? 1 : 0; -} - -#define spidelay(x) ndelay(x) - -#include "spi_bitbang_txrx.h" - -static u32 sh_sci_spi_txrx_mode0(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); -} - -static u32 sh_sci_spi_txrx_mode1(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); -} - -static u32 sh_sci_spi_txrx_mode2(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); -} - -static u32 sh_sci_spi_txrx_mode3(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); -} - -static void sh_sci_spi_chipselect(struct spi_device *dev, int value) -{ - struct sh_sci_spi *sp = spi_master_get_devdata(dev->master); - - if (sp->info && sp->info->chip_select) - (sp->info->chip_select)(sp->info, dev->chip_select, value); -} - -static int sh_sci_spi_probe(struct platform_device *dev) -{ - struct resource *r; - struct spi_master *master; - struct sh_sci_spi *sp; - int ret; - - master = spi_alloc_master(&dev->dev, sizeof(struct sh_sci_spi)); - if (master == NULL) { - dev_err(&dev->dev, "failed to allocate spi master\n"); - ret = -ENOMEM; - goto err0; - } - - sp = spi_master_get_devdata(master); - - platform_set_drvdata(dev, sp); - sp->info = dev->dev.platform_data; - - /* setup spi bitbang adaptor */ - sp->bitbang.master = spi_master_get(master); - sp->bitbang.master->bus_num = sp->info->bus_num; - sp->bitbang.master->num_chipselect = sp->info->num_chipselect; - sp->bitbang.chipselect = sh_sci_spi_chipselect; - - sp->bitbang.txrx_word[SPI_MODE_0] = sh_sci_spi_txrx_mode0; - sp->bitbang.txrx_word[SPI_MODE_1] = sh_sci_spi_txrx_mode1; - sp->bitbang.txrx_word[SPI_MODE_2] = sh_sci_spi_txrx_mode2; - sp->bitbang.txrx_word[SPI_MODE_3] = sh_sci_spi_txrx_mode3; - - r = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (r == NULL) { - ret = -ENOENT; - goto err1; - } - sp->membase = ioremap(r->start, resource_size(r)); - if (!sp->membase) { - ret = -ENXIO; - goto err1; - } - sp->val = ioread8(SCSPTR(sp)); - setbits(sp, PIN_INIT, 1); - - ret = spi_bitbang_start(&sp->bitbang); - if (!ret) - return 0; - - setbits(sp, PIN_INIT, 0); - iounmap(sp->membase); - err1: - spi_master_put(sp->bitbang.master); - err0: - return ret; -} - -static int sh_sci_spi_remove(struct platform_device *dev) -{ - struct sh_sci_spi *sp = platform_get_drvdata(dev); - - iounmap(sp->membase); - setbits(sp, PIN_INIT, 0); - spi_bitbang_stop(&sp->bitbang); - spi_master_put(sp->bitbang.master); - return 0; -} - -static struct platform_driver sh_sci_spi_drv = { - .probe = sh_sci_spi_probe, - .remove = sh_sci_spi_remove, - .driver = { - .name = "spi_sh_sci", - .owner = THIS_MODULE, - }, -}; - -static int __init sh_sci_spi_init(void) -{ - return platform_driver_register(&sh_sci_spi_drv); -} -module_init(sh_sci_spi_init); - -static void __exit sh_sci_spi_exit(void) -{ - platform_driver_unregister(&sh_sci_spi_drv); -} -module_exit(sh_sci_spi_exit); - -MODULE_DESCRIPTION("SH SCI SPI Driver"); -MODULE_AUTHOR("Magnus Damm "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:spi_sh_sci"); diff --git a/drivers/spi/spi_stmp.c b/drivers/spi/spi_stmp.c deleted file mode 100644 index fadff76eb7e0..000000000000 --- a/drivers/spi/spi_stmp.c +++ /dev/null @@ -1,679 +0,0 @@ -/* - * Freescale STMP378X SPI master driver - * - * Author: dmitry pervushin - * - * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - - -/* 0 means DMA mode(recommended, default), !0 - PIO mode */ -static int pio; -static int clock; - -/* default timeout for busy waits is 2 seconds */ -#define STMP_SPI_TIMEOUT (2 * HZ) - -struct stmp_spi { - int id; - - void * __iomem regs; /* vaddr of the control registers */ - - int irq, err_irq; - u32 dma; - struct stmp3xxx_dma_descriptor d; - - u32 speed_khz; - u32 saved_timings; - u32 divider; - - struct clk *clk; - struct device *master_dev; - - struct work_struct work; - struct workqueue_struct *workqueue; - - /* lock protects queue access */ - spinlock_t lock; - struct list_head queue; - - struct completion done; -}; - -#define busy_wait(cond) \ - ({ \ - unsigned long end_jiffies = jiffies + STMP_SPI_TIMEOUT; \ - bool succeeded = false; \ - do { \ - if (cond) { \ - succeeded = true; \ - break; \ - } \ - cpu_relax(); \ - } while (time_before(jiffies, end_jiffies)); \ - succeeded; \ - }) - -/** - * stmp_spi_init_hw - * Initialize the SSP port - */ -static int stmp_spi_init_hw(struct stmp_spi *ss) -{ - int err = 0; - void *pins = ss->master_dev->platform_data; - - err = stmp3xxx_request_pin_group(pins, dev_name(ss->master_dev)); - if (err) - goto out; - - ss->clk = clk_get(NULL, "ssp"); - if (IS_ERR(ss->clk)) { - err = PTR_ERR(ss->clk); - goto out_free_pins; - } - clk_enable(ss->clk); - - stmp3xxx_reset_block(ss->regs, false); - stmp3xxx_dma_reset_channel(ss->dma); - - return 0; - -out_free_pins: - stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev)); -out: - return err; -} - -static void stmp_spi_release_hw(struct stmp_spi *ss) -{ - void *pins = ss->master_dev->platform_data; - - if (ss->clk && !IS_ERR(ss->clk)) { - clk_disable(ss->clk); - clk_put(ss->clk); - } - stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev)); -} - -static int stmp_spi_setup_transfer(struct spi_device *spi, - struct spi_transfer *t) -{ - u8 bits_per_word; - u32 hz; - struct stmp_spi *ss = spi_master_get_devdata(spi->master); - u16 rate; - - bits_per_word = spi->bits_per_word; - if (t && t->bits_per_word) - bits_per_word = t->bits_per_word; - - /* - * Calculate speed: - * - by default, use maximum speed from ssp clk - * - if device overrides it, use it - * - if transfer specifies other speed, use transfer's one - */ - hz = 1000 * ss->speed_khz / ss->divider; - if (spi->max_speed_hz) - hz = min(hz, spi->max_speed_hz); - if (t && t->speed_hz) - hz = min(hz, t->speed_hz); - - if (hz == 0) { - dev_err(&spi->dev, "Cannot continue with zero clock\n"); - return -EINVAL; - } - - if (bits_per_word != 8) { - dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", - __func__, bits_per_word); - return -EINVAL; - } - - dev_dbg(&spi->dev, "Requested clk rate = %uHz, max = %uHz/%d = %uHz\n", - hz, ss->speed_khz, ss->divider, - ss->speed_khz * 1000 / ss->divider); - - if (ss->speed_khz * 1000 / ss->divider < hz) { - dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n", - __func__, hz); - return -EINVAL; - } - - rate = 1000 * ss->speed_khz/ss->divider/hz; - - writel(BF(ss->divider, SSP_TIMING_CLOCK_DIVIDE) | - BF(rate - 1, SSP_TIMING_CLOCK_RATE), - HW_SSP_TIMING + ss->regs); - - writel(BF(1 /* mode SPI */, SSP_CTRL1_SSP_MODE) | - BF(4 /* 8 bits */, SSP_CTRL1_WORD_LENGTH) | - ((spi->mode & SPI_CPOL) ? BM_SSP_CTRL1_POLARITY : 0) | - ((spi->mode & SPI_CPHA) ? BM_SSP_CTRL1_PHASE : 0) | - (pio ? 0 : BM_SSP_CTRL1_DMA_ENABLE), - ss->regs + HW_SSP_CTRL1); - - return 0; -} - -static int stmp_spi_setup(struct spi_device *spi) -{ - /* spi_setup() does basic checks, - * stmp_spi_setup_transfer() does more later - */ - if (spi->bits_per_word != 8) { - dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", - __func__, spi->bits_per_word); - return -EINVAL; - } - return 0; -} - -static inline u32 stmp_spi_cs(unsigned cs) -{ - return ((cs & 1) ? BM_SSP_CTRL0_WAIT_FOR_CMD : 0) | - ((cs & 2) ? BM_SSP_CTRL0_WAIT_FOR_IRQ : 0); -} - -static int stmp_spi_txrx_dma(struct stmp_spi *ss, int cs, - unsigned char *buf, dma_addr_t dma_buf, int len, - int first, int last, bool write) -{ - u32 c0 = 0; - dma_addr_t spi_buf_dma = dma_buf; - int status = 0; - enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE; - - c0 |= (first ? BM_SSP_CTRL0_LOCK_CS : 0); - c0 |= (last ? BM_SSP_CTRL0_IGNORE_CRC : 0); - c0 |= (write ? 0 : BM_SSP_CTRL0_READ); - c0 |= BM_SSP_CTRL0_DATA_XFER; - - c0 |= stmp_spi_cs(cs); - - c0 |= BF(len, SSP_CTRL0_XFER_COUNT); - - if (!dma_buf) - spi_buf_dma = dma_map_single(ss->master_dev, buf, len, dir); - - ss->d.command->cmd = - BF(len, APBH_CHn_CMD_XFER_COUNT) | - BF(1, APBH_CHn_CMD_CMDWORDS) | - BM_APBH_CHn_CMD_WAIT4ENDCMD | - BM_APBH_CHn_CMD_IRQONCMPLT | - BF(write ? BV_APBH_CHn_CMD_COMMAND__DMA_READ : - BV_APBH_CHn_CMD_COMMAND__DMA_WRITE, - APBH_CHn_CMD_COMMAND); - ss->d.command->pio_words[0] = c0; - ss->d.command->buf_ptr = spi_buf_dma; - - stmp3xxx_dma_reset_channel(ss->dma); - stmp3xxx_dma_clear_interrupt(ss->dma); - stmp3xxx_dma_enable_interrupt(ss->dma); - init_completion(&ss->done); - stmp3xxx_dma_go(ss->dma, &ss->d, 1); - wait_for_completion(&ss->done); - - if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & BM_SSP_CTRL0_RUN)) - status = -ETIMEDOUT; - - if (!dma_buf) - dma_unmap_single(ss->master_dev, spi_buf_dma, len, dir); - - return status; -} - -static inline void stmp_spi_enable(struct stmp_spi *ss) -{ - stmp3xxx_setl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0); - stmp3xxx_clearl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0); -} - -static inline void stmp_spi_disable(struct stmp_spi *ss) -{ - stmp3xxx_clearl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0); - stmp3xxx_setl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0); -} - -static int stmp_spi_txrx_pio(struct stmp_spi *ss, int cs, - unsigned char *buf, int len, - bool first, bool last, bool write) -{ - if (first) - stmp_spi_enable(ss); - - stmp3xxx_setl(stmp_spi_cs(cs), ss->regs + HW_SSP_CTRL0); - - while (len--) { - if (last && len <= 0) - stmp_spi_disable(ss); - - stmp3xxx_clearl(BM_SSP_CTRL0_XFER_COUNT, - ss->regs + HW_SSP_CTRL0); - stmp3xxx_setl(1, ss->regs + HW_SSP_CTRL0); - - if (write) - stmp3xxx_clearl(BM_SSP_CTRL0_READ, - ss->regs + HW_SSP_CTRL0); - else - stmp3xxx_setl(BM_SSP_CTRL0_READ, - ss->regs + HW_SSP_CTRL0); - - /* Run! */ - stmp3xxx_setl(BM_SSP_CTRL0_RUN, ss->regs + HW_SSP_CTRL0); - - if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & - BM_SSP_CTRL0_RUN)) - break; - - if (write) - writel(*buf, ss->regs + HW_SSP_DATA); - - /* Set TRANSFER */ - stmp3xxx_setl(BM_SSP_CTRL0_DATA_XFER, ss->regs + HW_SSP_CTRL0); - - if (!write) { - if (busy_wait((readl(ss->regs + HW_SSP_STATUS) & - BM_SSP_STATUS_FIFO_EMPTY))) - break; - *buf = readl(ss->regs + HW_SSP_DATA) & 0xFF; - } - - if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & - BM_SSP_CTRL0_RUN)) - break; - - /* advance to the next byte */ - buf++; - } - - return len < 0 ? 0 : -ETIMEDOUT; -} - -static int stmp_spi_handle_message(struct stmp_spi *ss, struct spi_message *m) -{ - bool first, last; - struct spi_transfer *t, *tmp_t; - int status = 0; - int cs; - - cs = m->spi->chip_select; - - list_for_each_entry_safe(t, tmp_t, &m->transfers, transfer_list) { - - first = (&t->transfer_list == m->transfers.next); - last = (&t->transfer_list == m->transfers.prev); - - if (first || t->speed_hz || t->bits_per_word) - stmp_spi_setup_transfer(m->spi, t); - - /* reject "not last" transfers which request to change cs */ - if (t->cs_change && !last) { - dev_err(&m->spi->dev, - "Message with t->cs_change has been skipped\n"); - continue; - } - - if (t->tx_buf) { - status = pio ? - stmp_spi_txrx_pio(ss, cs, (void *)t->tx_buf, - t->len, first, last, true) : - stmp_spi_txrx_dma(ss, cs, (void *)t->tx_buf, - t->tx_dma, t->len, first, last, true); -#ifdef DEBUG - if (t->len < 0x10) - print_hex_dump_bytes("Tx ", - DUMP_PREFIX_OFFSET, - t->tx_buf, t->len); - else - pr_debug("Tx: %d bytes\n", t->len); -#endif - } - if (t->rx_buf) { - status = pio ? - stmp_spi_txrx_pio(ss, cs, t->rx_buf, - t->len, first, last, false) : - stmp_spi_txrx_dma(ss, cs, t->rx_buf, - t->rx_dma, t->len, first, last, false); -#ifdef DEBUG - if (t->len < 0x10) - print_hex_dump_bytes("Rx ", - DUMP_PREFIX_OFFSET, - t->rx_buf, t->len); - else - pr_debug("Rx: %d bytes\n", t->len); -#endif - } - - if (t->delay_usecs) - udelay(t->delay_usecs); - - if (status) - break; - - } - return status; -} - -/** - * stmp_spi_handle - handle messages from the queue - */ -static void stmp_spi_handle(struct work_struct *w) -{ - struct stmp_spi *ss = container_of(w, struct stmp_spi, work); - unsigned long flags; - struct spi_message *m; - - spin_lock_irqsave(&ss->lock, flags); - while (!list_empty(&ss->queue)) { - m = list_entry(ss->queue.next, struct spi_message, queue); - list_del_init(&m->queue); - spin_unlock_irqrestore(&ss->lock, flags); - - m->status = stmp_spi_handle_message(ss, m); - m->complete(m->context); - - spin_lock_irqsave(&ss->lock, flags); - } - spin_unlock_irqrestore(&ss->lock, flags); - - return; -} - -/** - * stmp_spi_transfer - perform message transfer. - * Called indirectly from spi_async, queues all the messages to - * spi_handle_message. - * @spi: spi device - * @m: message to be queued - */ -static int stmp_spi_transfer(struct spi_device *spi, struct spi_message *m) -{ - struct stmp_spi *ss = spi_master_get_devdata(spi->master); - unsigned long flags; - - m->status = -EINPROGRESS; - spin_lock_irqsave(&ss->lock, flags); - list_add_tail(&m->queue, &ss->queue); - queue_work(ss->workqueue, &ss->work); - spin_unlock_irqrestore(&ss->lock, flags); - return 0; -} - -static irqreturn_t stmp_spi_irq(int irq, void *dev_id) -{ - struct stmp_spi *ss = dev_id; - - stmp3xxx_dma_clear_interrupt(ss->dma); - complete(&ss->done); - return IRQ_HANDLED; -} - -static irqreturn_t stmp_spi_irq_err(int irq, void *dev_id) -{ - struct stmp_spi *ss = dev_id; - u32 c1, st; - - c1 = readl(ss->regs + HW_SSP_CTRL1); - st = readl(ss->regs + HW_SSP_STATUS); - dev_err(ss->master_dev, "%s: status = 0x%08X, c1 = 0x%08X\n", - __func__, st, c1); - stmp3xxx_clearl(c1 & 0xCCCC0000, ss->regs + HW_SSP_CTRL1); - - return IRQ_HANDLED; -} - -static int __devinit stmp_spi_probe(struct platform_device *dev) -{ - int err = 0; - struct spi_master *master; - struct stmp_spi *ss; - struct resource *r; - - master = spi_alloc_master(&dev->dev, sizeof(struct stmp_spi)); - if (master == NULL) { - err = -ENOMEM; - goto out0; - } - master->flags = SPI_MASTER_HALF_DUPLEX; - - ss = spi_master_get_devdata(master); - platform_set_drvdata(dev, master); - - /* Get resources(memory, IRQ) associated with the device */ - r = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (r == NULL) { - err = -ENODEV; - goto out_put_master; - } - ss->regs = ioremap(r->start, resource_size(r)); - if (!ss->regs) { - err = -EINVAL; - goto out_put_master; - } - - ss->master_dev = &dev->dev; - ss->id = dev->id; - - INIT_WORK(&ss->work, stmp_spi_handle); - INIT_LIST_HEAD(&ss->queue); - spin_lock_init(&ss->lock); - - ss->workqueue = create_singlethread_workqueue(dev_name(&dev->dev)); - if (!ss->workqueue) { - err = -ENXIO; - goto out_put_master; - } - master->transfer = stmp_spi_transfer; - master->setup = stmp_spi_setup; - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA; - - ss->irq = platform_get_irq(dev, 0); - if (ss->irq < 0) { - err = ss->irq; - goto out_put_master; - } - ss->err_irq = platform_get_irq(dev, 1); - if (ss->err_irq < 0) { - err = ss->err_irq; - goto out_put_master; - } - - r = platform_get_resource(dev, IORESOURCE_DMA, 0); - if (r == NULL) { - err = -ENODEV; - goto out_put_master; - } - - ss->dma = r->start; - err = stmp3xxx_dma_request(ss->dma, &dev->dev, dev_name(&dev->dev)); - if (err) - goto out_put_master; - - err = stmp3xxx_dma_allocate_command(ss->dma, &ss->d); - if (err) - goto out_free_dma; - - master->bus_num = dev->id; - master->num_chipselect = 1; - - /* SPI controller initializations */ - err = stmp_spi_init_hw(ss); - if (err) { - dev_dbg(&dev->dev, "cannot initialize hardware\n"); - goto out_free_dma_desc; - } - - if (clock) { - dev_info(&dev->dev, "clock rate forced to %d\n", clock); - clk_set_rate(ss->clk, clock); - } - ss->speed_khz = clk_get_rate(ss->clk); - ss->divider = 2; - dev_info(&dev->dev, "max possible speed %d = %ld/%d kHz\n", - ss->speed_khz, clk_get_rate(ss->clk), ss->divider); - - /* Register for SPI interrupt */ - err = request_irq(ss->irq, stmp_spi_irq, 0, - dev_name(&dev->dev), ss); - if (err) { - dev_dbg(&dev->dev, "request_irq failed, %d\n", err); - goto out_release_hw; - } - - /* ..and shared interrupt for all SSP controllers */ - err = request_irq(ss->err_irq, stmp_spi_irq_err, IRQF_SHARED, - dev_name(&dev->dev), ss); - if (err) { - dev_dbg(&dev->dev, "request_irq(error) failed, %d\n", err); - goto out_free_irq; - } - - err = spi_register_master(master); - if (err) { - dev_dbg(&dev->dev, "cannot register spi master, %d\n", err); - goto out_free_irq_2; - } - dev_info(&dev->dev, "at (mapped) 0x%08X, irq=%d, bus %d, %s mode\n", - (u32)ss->regs, ss->irq, master->bus_num, - pio ? "PIO" : "DMA"); - return 0; - -out_free_irq_2: - free_irq(ss->err_irq, ss); -out_free_irq: - free_irq(ss->irq, ss); -out_free_dma_desc: - stmp3xxx_dma_free_command(ss->dma, &ss->d); -out_free_dma: - stmp3xxx_dma_release(ss->dma); -out_release_hw: - stmp_spi_release_hw(ss); -out_put_master: - if (ss->workqueue) - destroy_workqueue(ss->workqueue); - if (ss->regs) - iounmap(ss->regs); - platform_set_drvdata(dev, NULL); - spi_master_put(master); -out0: - return err; -} - -static int __devexit stmp_spi_remove(struct platform_device *dev) -{ - struct stmp_spi *ss; - struct spi_master *master; - - master = platform_get_drvdata(dev); - if (master == NULL) - goto out0; - ss = spi_master_get_devdata(master); - - spi_unregister_master(master); - - free_irq(ss->err_irq, ss); - free_irq(ss->irq, ss); - stmp3xxx_dma_free_command(ss->dma, &ss->d); - stmp3xxx_dma_release(ss->dma); - stmp_spi_release_hw(ss); - destroy_workqueue(ss->workqueue); - iounmap(ss->regs); - spi_master_put(master); - platform_set_drvdata(dev, NULL); -out0: - return 0; -} - -#ifdef CONFIG_PM -static int stmp_spi_suspend(struct platform_device *pdev, pm_message_t pmsg) -{ - struct stmp_spi *ss; - struct spi_master *master; - - master = platform_get_drvdata(pdev); - ss = spi_master_get_devdata(master); - - ss->saved_timings = readl(HW_SSP_TIMING + ss->regs); - clk_disable(ss->clk); - - return 0; -} - -static int stmp_spi_resume(struct platform_device *pdev) -{ - struct stmp_spi *ss; - struct spi_master *master; - - master = platform_get_drvdata(pdev); - ss = spi_master_get_devdata(master); - - clk_enable(ss->clk); - stmp3xxx_reset_block(ss->regs, false); - writel(ss->saved_timings, ss->regs + HW_SSP_TIMING); - - return 0; -} - -#else -#define stmp_spi_suspend NULL -#define stmp_spi_resume NULL -#endif - -static struct platform_driver stmp_spi_driver = { - .probe = stmp_spi_probe, - .remove = __devexit_p(stmp_spi_remove), - .driver = { - .name = "stmp3xxx_ssp", - .owner = THIS_MODULE, - }, - .suspend = stmp_spi_suspend, - .resume = stmp_spi_resume, -}; - -static int __init stmp_spi_init(void) -{ - return platform_driver_register(&stmp_spi_driver); -} - -static void __exit stmp_spi_exit(void) -{ - platform_driver_unregister(&stmp_spi_driver); -} - -module_init(stmp_spi_init); -module_exit(stmp_spi_exit); -module_param(pio, int, S_IRUGO); -module_param(clock, int, S_IRUGO); -MODULE_AUTHOR("dmitry pervushin "); -MODULE_DESCRIPTION("STMP3xxx SPI/SSP driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_tegra.c b/drivers/spi/spi_tegra.c deleted file mode 100644 index 6c3aa6ecaade..000000000000 --- a/drivers/spi/spi_tegra.c +++ /dev/null @@ -1,618 +0,0 @@ -/* - * Driver for Nvidia TEGRA spi controller. - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Erik Gilling - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include - -#define SLINK_COMMAND 0x000 -#define SLINK_BIT_LENGTH(x) (((x) & 0x1f) << 0) -#define SLINK_WORD_SIZE(x) (((x) & 0x1f) << 5) -#define SLINK_BOTH_EN (1 << 10) -#define SLINK_CS_SW (1 << 11) -#define SLINK_CS_VALUE (1 << 12) -#define SLINK_CS_POLARITY (1 << 13) -#define SLINK_IDLE_SDA_DRIVE_LOW (0 << 16) -#define SLINK_IDLE_SDA_DRIVE_HIGH (1 << 16) -#define SLINK_IDLE_SDA_PULL_LOW (2 << 16) -#define SLINK_IDLE_SDA_PULL_HIGH (3 << 16) -#define SLINK_IDLE_SDA_MASK (3 << 16) -#define SLINK_CS_POLARITY1 (1 << 20) -#define SLINK_CK_SDA (1 << 21) -#define SLINK_CS_POLARITY2 (1 << 22) -#define SLINK_CS_POLARITY3 (1 << 23) -#define SLINK_IDLE_SCLK_DRIVE_LOW (0 << 24) -#define SLINK_IDLE_SCLK_DRIVE_HIGH (1 << 24) -#define SLINK_IDLE_SCLK_PULL_LOW (2 << 24) -#define SLINK_IDLE_SCLK_PULL_HIGH (3 << 24) -#define SLINK_IDLE_SCLK_MASK (3 << 24) -#define SLINK_M_S (1 << 28) -#define SLINK_WAIT (1 << 29) -#define SLINK_GO (1 << 30) -#define SLINK_ENB (1 << 31) - -#define SLINK_COMMAND2 0x004 -#define SLINK_LSBFE (1 << 0) -#define SLINK_SSOE (1 << 1) -#define SLINK_SPIE (1 << 4) -#define SLINK_BIDIROE (1 << 6) -#define SLINK_MODFEN (1 << 7) -#define SLINK_INT_SIZE(x) (((x) & 0x1f) << 8) -#define SLINK_CS_ACTIVE_BETWEEN (1 << 17) -#define SLINK_SS_EN_CS(x) (((x) & 0x3) << 18) -#define SLINK_SS_SETUP(x) (((x) & 0x3) << 20) -#define SLINK_FIFO_REFILLS_0 (0 << 22) -#define SLINK_FIFO_REFILLS_1 (1 << 22) -#define SLINK_FIFO_REFILLS_2 (2 << 22) -#define SLINK_FIFO_REFILLS_3 (3 << 22) -#define SLINK_FIFO_REFILLS_MASK (3 << 22) -#define SLINK_WAIT_PACK_INT(x) (((x) & 0x7) << 26) -#define SLINK_SPC0 (1 << 29) -#define SLINK_TXEN (1 << 30) -#define SLINK_RXEN (1 << 31) - -#define SLINK_STATUS 0x008 -#define SLINK_COUNT(val) (((val) >> 0) & 0x1f) -#define SLINK_WORD(val) (((val) >> 5) & 0x1f) -#define SLINK_BLK_CNT(val) (((val) >> 0) & 0xffff) -#define SLINK_MODF (1 << 16) -#define SLINK_RX_UNF (1 << 18) -#define SLINK_TX_OVF (1 << 19) -#define SLINK_TX_FULL (1 << 20) -#define SLINK_TX_EMPTY (1 << 21) -#define SLINK_RX_FULL (1 << 22) -#define SLINK_RX_EMPTY (1 << 23) -#define SLINK_TX_UNF (1 << 24) -#define SLINK_RX_OVF (1 << 25) -#define SLINK_TX_FLUSH (1 << 26) -#define SLINK_RX_FLUSH (1 << 27) -#define SLINK_SCLK (1 << 28) -#define SLINK_ERR (1 << 29) -#define SLINK_RDY (1 << 30) -#define SLINK_BSY (1 << 31) - -#define SLINK_MAS_DATA 0x010 -#define SLINK_SLAVE_DATA 0x014 - -#define SLINK_DMA_CTL 0x018 -#define SLINK_DMA_BLOCK_SIZE(x) (((x) & 0xffff) << 0) -#define SLINK_TX_TRIG_1 (0 << 16) -#define SLINK_TX_TRIG_4 (1 << 16) -#define SLINK_TX_TRIG_8 (2 << 16) -#define SLINK_TX_TRIG_16 (3 << 16) -#define SLINK_TX_TRIG_MASK (3 << 16) -#define SLINK_RX_TRIG_1 (0 << 18) -#define SLINK_RX_TRIG_4 (1 << 18) -#define SLINK_RX_TRIG_8 (2 << 18) -#define SLINK_RX_TRIG_16 (3 << 18) -#define SLINK_RX_TRIG_MASK (3 << 18) -#define SLINK_PACKED (1 << 20) -#define SLINK_PACK_SIZE_4 (0 << 21) -#define SLINK_PACK_SIZE_8 (1 << 21) -#define SLINK_PACK_SIZE_16 (2 << 21) -#define SLINK_PACK_SIZE_32 (3 << 21) -#define SLINK_PACK_SIZE_MASK (3 << 21) -#define SLINK_IE_TXC (1 << 26) -#define SLINK_IE_RXC (1 << 27) -#define SLINK_DMA_EN (1 << 31) - -#define SLINK_STATUS2 0x01c -#define SLINK_TX_FIFO_EMPTY_COUNT(val) (((val) & 0x3f) >> 0) -#define SLINK_RX_FIFO_FULL_COUNT(val) (((val) & 0x3f) >> 16) - -#define SLINK_TX_FIFO 0x100 -#define SLINK_RX_FIFO 0x180 - -static const unsigned long spi_tegra_req_sels[] = { - TEGRA_DMA_REQ_SEL_SL2B1, - TEGRA_DMA_REQ_SEL_SL2B2, - TEGRA_DMA_REQ_SEL_SL2B3, - TEGRA_DMA_REQ_SEL_SL2B4, -}; - -#define BB_LEN 32 - -struct spi_tegra_data { - struct spi_master *master; - struct platform_device *pdev; - spinlock_t lock; - - struct clk *clk; - void __iomem *base; - unsigned long phys; - - u32 cur_speed; - - struct list_head queue; - struct spi_transfer *cur; - unsigned cur_pos; - unsigned cur_len; - unsigned cur_bytes_per_word; - - /* The tegra spi controller has a bug which causes the first word - * in PIO transactions to be garbage. Since packed DMA transactions - * require transfers to be 4 byte aligned we need a bounce buffer - * for the generic case. - */ - struct tegra_dma_req rx_dma_req; - struct tegra_dma_channel *rx_dma; - u32 *rx_bb; - dma_addr_t rx_bb_phys; -}; - - -static inline unsigned long spi_tegra_readl(struct spi_tegra_data *tspi, - unsigned long reg) -{ - return readl(tspi->base + reg); -} - -static inline void spi_tegra_writel(struct spi_tegra_data *tspi, - unsigned long val, - unsigned long reg) -{ - writel(val, tspi->base + reg); -} - -static void spi_tegra_go(struct spi_tegra_data *tspi) -{ - unsigned long val; - - wmb(); - - val = spi_tegra_readl(tspi, SLINK_DMA_CTL); - val &= ~SLINK_DMA_BLOCK_SIZE(~0) & ~SLINK_DMA_EN; - val |= SLINK_DMA_BLOCK_SIZE(tspi->rx_dma_req.size / 4 - 1); - spi_tegra_writel(tspi, val, SLINK_DMA_CTL); - - tegra_dma_enqueue_req(tspi->rx_dma, &tspi->rx_dma_req); - - val |= SLINK_DMA_EN; - spi_tegra_writel(tspi, val, SLINK_DMA_CTL); -} - -static unsigned spi_tegra_fill_tx_fifo(struct spi_tegra_data *tspi, - struct spi_transfer *t) -{ - unsigned len = min(t->len - tspi->cur_pos, BB_LEN * - tspi->cur_bytes_per_word); - u8 *tx_buf = (u8 *)t->tx_buf + tspi->cur_pos; - int i, j; - unsigned long val; - - val = spi_tegra_readl(tspi, SLINK_COMMAND); - val &= ~SLINK_WORD_SIZE(~0); - val |= SLINK_WORD_SIZE(len / tspi->cur_bytes_per_word - 1); - spi_tegra_writel(tspi, val, SLINK_COMMAND); - - for (i = 0; i < len; i += tspi->cur_bytes_per_word) { - val = 0; - for (j = 0; j < tspi->cur_bytes_per_word; j++) - val |= tx_buf[i + j] << j * 8; - - spi_tegra_writel(tspi, val, SLINK_TX_FIFO); - } - - tspi->rx_dma_req.size = len / tspi->cur_bytes_per_word * 4; - - return len; -} - -static unsigned spi_tegra_drain_rx_fifo(struct spi_tegra_data *tspi, - struct spi_transfer *t) -{ - unsigned len = tspi->cur_len; - u8 *rx_buf = (u8 *)t->rx_buf + tspi->cur_pos; - int i, j; - unsigned long val; - - for (i = 0; i < len; i += tspi->cur_bytes_per_word) { - val = tspi->rx_bb[i / tspi->cur_bytes_per_word]; - for (j = 0; j < tspi->cur_bytes_per_word; j++) - rx_buf[i + j] = (val >> (j * 8)) & 0xff; - } - - return len; -} - -static void spi_tegra_start_transfer(struct spi_device *spi, - struct spi_transfer *t) -{ - struct spi_tegra_data *tspi = spi_master_get_devdata(spi->master); - u32 speed; - u8 bits_per_word; - unsigned long val; - - speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz; - bits_per_word = t->bits_per_word ? t->bits_per_word : - spi->bits_per_word; - - tspi->cur_bytes_per_word = (bits_per_word - 1) / 8 + 1; - - if (speed != tspi->cur_speed) - clk_set_rate(tspi->clk, speed); - - if (tspi->cur_speed == 0) - clk_enable(tspi->clk); - - tspi->cur_speed = speed; - - val = spi_tegra_readl(tspi, SLINK_COMMAND2); - val &= ~SLINK_SS_EN_CS(~0) | SLINK_RXEN | SLINK_TXEN; - if (t->rx_buf) - val |= SLINK_RXEN; - if (t->tx_buf) - val |= SLINK_TXEN; - val |= SLINK_SS_EN_CS(spi->chip_select); - val |= SLINK_SPIE; - spi_tegra_writel(tspi, val, SLINK_COMMAND2); - - val = spi_tegra_readl(tspi, SLINK_COMMAND); - val &= ~SLINK_BIT_LENGTH(~0); - val |= SLINK_BIT_LENGTH(bits_per_word - 1); - - /* FIXME: should probably control CS manually so that we can be sure - * it does not go low between transfer and to support delay_usecs - * correctly. - */ - val &= ~SLINK_IDLE_SCLK_MASK & ~SLINK_CK_SDA & ~SLINK_CS_SW; - - if (spi->mode & SPI_CPHA) - val |= SLINK_CK_SDA; - - if (spi->mode & SPI_CPOL) - val |= SLINK_IDLE_SCLK_DRIVE_HIGH; - else - val |= SLINK_IDLE_SCLK_DRIVE_LOW; - - val |= SLINK_M_S; - - spi_tegra_writel(tspi, val, SLINK_COMMAND); - - spi_tegra_writel(tspi, SLINK_RX_FLUSH | SLINK_TX_FLUSH, SLINK_STATUS); - - tspi->cur = t; - tspi->cur_pos = 0; - tspi->cur_len = spi_tegra_fill_tx_fifo(tspi, t); - - spi_tegra_go(tspi); -} - -static void spi_tegra_start_message(struct spi_device *spi, - struct spi_message *m) -{ - struct spi_transfer *t; - - m->actual_length = 0; - m->status = 0; - - t = list_first_entry(&m->transfers, struct spi_transfer, transfer_list); - spi_tegra_start_transfer(spi, t); -} - -static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req) -{ - struct spi_tegra_data *tspi = req->dev; - unsigned long flags; - struct spi_message *m; - struct spi_device *spi; - int timeout = 0; - unsigned long val; - - /* the SPI controller may come back with both the BSY and RDY bits - * set. In this case we need to wait for the BSY bit to clear so - * that we are sure the DMA is finished. 1000 reads was empirically - * determined to be long enough. - */ - while (timeout++ < 1000) { - if (!(spi_tegra_readl(tspi, SLINK_STATUS) & SLINK_BSY)) - break; - } - - spin_lock_irqsave(&tspi->lock, flags); - - val = spi_tegra_readl(tspi, SLINK_STATUS); - val |= SLINK_RDY; - spi_tegra_writel(tspi, val, SLINK_STATUS); - - m = list_first_entry(&tspi->queue, struct spi_message, queue); - - if (timeout >= 1000) - m->status = -EIO; - - spi = m->state; - - tspi->cur_pos += spi_tegra_drain_rx_fifo(tspi, tspi->cur); - m->actual_length += tspi->cur_pos; - - if (tspi->cur_pos < tspi->cur->len) { - tspi->cur_len = spi_tegra_fill_tx_fifo(tspi, tspi->cur); - spi_tegra_go(tspi); - } else if (!list_is_last(&tspi->cur->transfer_list, - &m->transfers)) { - tspi->cur = list_first_entry(&tspi->cur->transfer_list, - struct spi_transfer, - transfer_list); - spi_tegra_start_transfer(spi, tspi->cur); - } else { - list_del(&m->queue); - - m->complete(m->context); - - if (!list_empty(&tspi->queue)) { - m = list_first_entry(&tspi->queue, struct spi_message, - queue); - spi = m->state; - spi_tegra_start_message(spi, m); - } else { - clk_disable(tspi->clk); - tspi->cur_speed = 0; - } - } - - spin_unlock_irqrestore(&tspi->lock, flags); -} - -static int spi_tegra_setup(struct spi_device *spi) -{ - struct spi_tegra_data *tspi = spi_master_get_devdata(spi->master); - unsigned long cs_bit; - unsigned long val; - unsigned long flags; - - dev_dbg(&spi->dev, "setup %d bpw, %scpol, %scpha, %dHz\n", - spi->bits_per_word, - spi->mode & SPI_CPOL ? "" : "~", - spi->mode & SPI_CPHA ? "" : "~", - spi->max_speed_hz); - - - switch (spi->chip_select) { - case 0: - cs_bit = SLINK_CS_POLARITY; - break; - - case 1: - cs_bit = SLINK_CS_POLARITY1; - break; - - case 2: - cs_bit = SLINK_CS_POLARITY2; - break; - - case 4: - cs_bit = SLINK_CS_POLARITY3; - break; - - default: - return -EINVAL; - } - - spin_lock_irqsave(&tspi->lock, flags); - - val = spi_tegra_readl(tspi, SLINK_COMMAND); - if (spi->mode & SPI_CS_HIGH) - val |= cs_bit; - else - val &= ~cs_bit; - spi_tegra_writel(tspi, val, SLINK_COMMAND); - - spin_unlock_irqrestore(&tspi->lock, flags); - - return 0; -} - -static int spi_tegra_transfer(struct spi_device *spi, struct spi_message *m) -{ - struct spi_tegra_data *tspi = spi_master_get_devdata(spi->master); - struct spi_transfer *t; - unsigned long flags; - int was_empty; - - if (list_empty(&m->transfers) || !m->complete) - return -EINVAL; - - list_for_each_entry(t, &m->transfers, transfer_list) { - if (t->bits_per_word < 0 || t->bits_per_word > 32) - return -EINVAL; - - if (t->len == 0) - return -EINVAL; - - if (!t->rx_buf && !t->tx_buf) - return -EINVAL; - } - - m->state = spi; - - spin_lock_irqsave(&tspi->lock, flags); - was_empty = list_empty(&tspi->queue); - list_add_tail(&m->queue, &tspi->queue); - - if (was_empty) - spi_tegra_start_message(spi, m); - - spin_unlock_irqrestore(&tspi->lock, flags); - - return 0; -} - -static int __init spi_tegra_probe(struct platform_device *pdev) -{ - struct spi_master *master; - struct spi_tegra_data *tspi; - struct resource *r; - int ret; - - master = spi_alloc_master(&pdev->dev, sizeof *tspi); - if (master == NULL) { - dev_err(&pdev->dev, "master allocation failed\n"); - return -ENOMEM; - } - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - - master->bus_num = pdev->id; - - master->setup = spi_tegra_setup; - master->transfer = spi_tegra_transfer; - master->num_chipselect = 4; - - dev_set_drvdata(&pdev->dev, master); - tspi = spi_master_get_devdata(master); - tspi->master = master; - tspi->pdev = pdev; - spin_lock_init(&tspi->lock); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - ret = -ENODEV; - goto err0; - } - - if (!request_mem_region(r->start, (r->end - r->start) + 1, - dev_name(&pdev->dev))) { - ret = -EBUSY; - goto err0; - } - - tspi->phys = r->start; - tspi->base = ioremap(r->start, r->end - r->start + 1); - if (!tspi->base) { - dev_err(&pdev->dev, "can't ioremap iomem\n"); - ret = -ENOMEM; - goto err1; - } - - tspi->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(tspi->clk)) { - dev_err(&pdev->dev, "can not get clock\n"); - ret = PTR_ERR(tspi->clk); - goto err2; - } - - INIT_LIST_HEAD(&tspi->queue); - - tspi->rx_dma = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT); - if (!tspi->rx_dma) { - dev_err(&pdev->dev, "can not allocate rx dma channel\n"); - ret = -ENODEV; - goto err3; - } - - tspi->rx_bb = dma_alloc_coherent(&pdev->dev, sizeof(u32) * BB_LEN, - &tspi->rx_bb_phys, GFP_KERNEL); - if (!tspi->rx_bb) { - dev_err(&pdev->dev, "can not allocate rx bounce buffer\n"); - ret = -ENOMEM; - goto err4; - } - - tspi->rx_dma_req.complete = tegra_spi_rx_dma_complete; - tspi->rx_dma_req.to_memory = 1; - tspi->rx_dma_req.dest_addr = tspi->rx_bb_phys; - tspi->rx_dma_req.dest_bus_width = 32; - tspi->rx_dma_req.source_addr = tspi->phys + SLINK_RX_FIFO; - tspi->rx_dma_req.source_bus_width = 32; - tspi->rx_dma_req.source_wrap = 4; - tspi->rx_dma_req.req_sel = spi_tegra_req_sels[pdev->id]; - tspi->rx_dma_req.dev = tspi; - - ret = spi_register_master(master); - - if (ret < 0) - goto err5; - - return ret; - -err5: - dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN, - tspi->rx_bb, tspi->rx_bb_phys); -err4: - tegra_dma_free_channel(tspi->rx_dma); -err3: - clk_put(tspi->clk); -err2: - iounmap(tspi->base); -err1: - release_mem_region(r->start, (r->end - r->start) + 1); -err0: - spi_master_put(master); - return ret; -} - -static int __devexit spi_tegra_remove(struct platform_device *pdev) -{ - struct spi_master *master; - struct spi_tegra_data *tspi; - struct resource *r; - - master = dev_get_drvdata(&pdev->dev); - tspi = spi_master_get_devdata(master); - - spi_unregister_master(master); - tegra_dma_free_channel(tspi->rx_dma); - - dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN, - tspi->rx_bb, tspi->rx_bb_phys); - - clk_put(tspi->clk); - iounmap(tspi->base); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, (r->end - r->start) + 1); - - return 0; -} - -MODULE_ALIAS("platform:spi_tegra"); - -static struct platform_driver spi_tegra_driver = { - .driver = { - .name = "spi_tegra", - .owner = THIS_MODULE, - }, - .remove = __devexit_p(spi_tegra_remove), -}; - -static int __init spi_tegra_init(void) -{ - return platform_driver_probe(&spi_tegra_driver, spi_tegra_probe); -} -module_init(spi_tegra_init); - -static void __exit spi_tegra_exit(void) -{ - platform_driver_unregister(&spi_tegra_driver); -} -module_exit(spi_tegra_exit); - -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_topcliff_pch.c b/drivers/spi/spi_topcliff_pch.c deleted file mode 100644 index 79e48d451137..000000000000 --- a/drivers/spi/spi_topcliff_pch.c +++ /dev/null @@ -1,1303 +0,0 @@ -/* - * SPI bus driver for the Topcliff PCH used by Intel SoCs - * - * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Register offsets */ -#define PCH_SPCR 0x00 /* SPI control register */ -#define PCH_SPBRR 0x04 /* SPI baud rate register */ -#define PCH_SPSR 0x08 /* SPI status register */ -#define PCH_SPDWR 0x0C /* SPI write data register */ -#define PCH_SPDRR 0x10 /* SPI read data register */ -#define PCH_SSNXCR 0x18 /* SSN Expand Control Register */ -#define PCH_SRST 0x1C /* SPI reset register */ - -#define PCH_SPSR_TFD 0x000007C0 -#define PCH_SPSR_RFD 0x0000F800 - -#define PCH_READABLE(x) (((x) & PCH_SPSR_RFD)>>11) -#define PCH_WRITABLE(x) (((x) & PCH_SPSR_TFD)>>6) - -#define PCH_RX_THOLD 7 -#define PCH_RX_THOLD_MAX 15 - -#define PCH_MAX_BAUDRATE 5000000 -#define PCH_MAX_FIFO_DEPTH 16 - -#define STATUS_RUNNING 1 -#define STATUS_EXITING 2 -#define PCH_SLEEP_TIME 10 - -#define PCH_ADDRESS_SIZE 0x20 - -#define SSN_LOW 0x02U -#define SSN_NO_CONTROL 0x00U -#define PCH_MAX_CS 0xFF -#define PCI_DEVICE_ID_GE_SPI 0x8816 - -#define SPCR_SPE_BIT (1 << 0) -#define SPCR_MSTR_BIT (1 << 1) -#define SPCR_LSBF_BIT (1 << 4) -#define SPCR_CPHA_BIT (1 << 5) -#define SPCR_CPOL_BIT (1 << 6) -#define SPCR_TFIE_BIT (1 << 8) -#define SPCR_RFIE_BIT (1 << 9) -#define SPCR_FIE_BIT (1 << 10) -#define SPCR_ORIE_BIT (1 << 11) -#define SPCR_MDFIE_BIT (1 << 12) -#define SPCR_FICLR_BIT (1 << 24) -#define SPSR_TFI_BIT (1 << 0) -#define SPSR_RFI_BIT (1 << 1) -#define SPSR_FI_BIT (1 << 2) -#define SPBRR_SIZE_BIT (1 << 10) - -#define PCH_ALL (SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|SPCR_ORIE_BIT|SPCR_MDFIE_BIT) - -#define SPCR_RFIC_FIELD 20 -#define SPCR_TFIC_FIELD 16 - -#define SPSR_INT_BITS 0x1F -#define MASK_SPBRR_SPBR_BITS (~((1 << 10) - 1)) -#define MASK_RFIC_SPCR_BITS (~(0xf << 20)) -#define MASK_TFIC_SPCR_BITS (~(0xf000f << 12)) - -#define PCH_CLOCK_HZ 50000000 -#define PCH_MAX_SPBR 1023 - - -/** - * struct pch_spi_data - Holds the SPI channel specific details - * @io_remap_addr: The remapped PCI base address - * @master: Pointer to the SPI master structure - * @work: Reference to work queue handler - * @wk: Workqueue for carrying out execution of the - * requests - * @wait: Wait queue for waking up upon receiving an - * interrupt. - * @transfer_complete: Status of SPI Transfer - * @bcurrent_msg_processing: Status flag for message processing - * @lock: Lock for protecting this structure - * @queue: SPI Message queue - * @status: Status of the SPI driver - * @bpw_len: Length of data to be transferred in bits per - * word - * @transfer_active: Flag showing active transfer - * @tx_index: Transmit data count; for bookkeeping during - * transfer - * @rx_index: Receive data count; for bookkeeping during - * transfer - * @tx_buff: Buffer for data to be transmitted - * @rx_index: Buffer for Received data - * @n_curnt_chip: The chip number that this SPI driver currently - * operates on - * @current_chip: Reference to the current chip that this SPI - * driver currently operates on - * @current_msg: The current message that this SPI driver is - * handling - * @cur_trans: The current transfer that this SPI driver is - * handling - * @board_dat: Reference to the SPI device data structure - */ -struct pch_spi_data { - void __iomem *io_remap_addr; - struct spi_master *master; - struct work_struct work; - struct workqueue_struct *wk; - wait_queue_head_t wait; - u8 transfer_complete; - u8 bcurrent_msg_processing; - spinlock_t lock; - struct list_head queue; - u8 status; - u32 bpw_len; - u8 transfer_active; - u32 tx_index; - u32 rx_index; - u16 *pkt_tx_buff; - u16 *pkt_rx_buff; - u8 n_curnt_chip; - struct spi_device *current_chip; - struct spi_message *current_msg; - struct spi_transfer *cur_trans; - struct pch_spi_board_data *board_dat; -}; - -/** - * struct pch_spi_board_data - Holds the SPI device specific details - * @pdev: Pointer to the PCI device - * @irq_reg_sts: Status of IRQ registration - * @pci_req_sts: Status of pci_request_regions - * @suspend_sts: Status of suspend - * @data: Pointer to SPI channel data structure - */ -struct pch_spi_board_data { - struct pci_dev *pdev; - u8 irq_reg_sts; - u8 pci_req_sts; - u8 suspend_sts; - struct pch_spi_data *data; -}; - -static struct pci_device_id pch_spi_pcidev_id[] = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_GE_SPI)}, - {0,} -}; - -/** - * pch_spi_writereg() - Performs register writes - * @master: Pointer to struct spi_master. - * @idx: Register offset. - * @val: Value to be written to register. - */ -static inline void pch_spi_writereg(struct spi_master *master, int idx, u32 val) -{ - struct pch_spi_data *data = spi_master_get_devdata(master); - iowrite32(val, (data->io_remap_addr + idx)); -} - -/** - * pch_spi_readreg() - Performs register reads - * @master: Pointer to struct spi_master. - * @idx: Register offset. - */ -static inline u32 pch_spi_readreg(struct spi_master *master, int idx) -{ - struct pch_spi_data *data = spi_master_get_devdata(master); - return ioread32(data->io_remap_addr + idx); -} - -static inline void pch_spi_setclr_reg(struct spi_master *master, int idx, - u32 set, u32 clr) -{ - u32 tmp = pch_spi_readreg(master, idx); - tmp = (tmp & ~clr) | set; - pch_spi_writereg(master, idx, tmp); -} - -static void pch_spi_set_master_mode(struct spi_master *master) -{ - pch_spi_setclr_reg(master, PCH_SPCR, SPCR_MSTR_BIT, 0); -} - -/** - * pch_spi_clear_fifo() - Clears the Transmit and Receive FIFOs - * @master: Pointer to struct spi_master. - */ -static void pch_spi_clear_fifo(struct spi_master *master) -{ - pch_spi_setclr_reg(master, PCH_SPCR, SPCR_FICLR_BIT, 0); - pch_spi_setclr_reg(master, PCH_SPCR, 0, SPCR_FICLR_BIT); -} - -static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, - void __iomem *io_remap_addr) -{ - u32 n_read, tx_index, rx_index, bpw_len; - u16 *pkt_rx_buffer, *pkt_tx_buff; - int read_cnt; - u32 reg_spcr_val; - void __iomem *spsr; - void __iomem *spdrr; - void __iomem *spdwr; - - spsr = io_remap_addr + PCH_SPSR; - iowrite32(reg_spsr_val, spsr); - - if (data->transfer_active) { - rx_index = data->rx_index; - tx_index = data->tx_index; - bpw_len = data->bpw_len; - pkt_rx_buffer = data->pkt_rx_buff; - pkt_tx_buff = data->pkt_tx_buff; - - spdrr = io_remap_addr + PCH_SPDRR; - spdwr = io_remap_addr + PCH_SPDWR; - - n_read = PCH_READABLE(reg_spsr_val); - - for (read_cnt = 0; (read_cnt < n_read); read_cnt++) { - pkt_rx_buffer[rx_index++] = ioread32(spdrr); - if (tx_index < bpw_len) - iowrite32(pkt_tx_buff[tx_index++], spdwr); - } - - /* disable RFI if not needed */ - if ((bpw_len - rx_index) <= PCH_MAX_FIFO_DEPTH) { - reg_spcr_val = ioread32(io_remap_addr + PCH_SPCR); - reg_spcr_val &= ~SPCR_RFIE_BIT; /* disable RFI */ - - /* reset rx threshold */ - reg_spcr_val &= MASK_RFIC_SPCR_BITS; - reg_spcr_val |= (PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD); - iowrite32(((reg_spcr_val) &= (~(SPCR_RFIE_BIT))), - (io_remap_addr + PCH_SPCR)); - } - - /* update counts */ - data->tx_index = tx_index; - data->rx_index = rx_index; - - } - - /* if transfer complete interrupt */ - if (reg_spsr_val & SPSR_FI_BIT) { - /* disable FI & RFI interrupts */ - pch_spi_setclr_reg(data->master, PCH_SPCR, 0, - SPCR_FIE_BIT | SPCR_RFIE_BIT); - - /* transfer is completed;inform pch_spi_process_messages */ - data->transfer_complete = true; - wake_up(&data->wait); - } -} - -/** - * pch_spi_handler() - Interrupt handler - * @irq: The interrupt number. - * @dev_id: Pointer to struct pch_spi_board_data. - */ -static irqreturn_t pch_spi_handler(int irq, void *dev_id) -{ - u32 reg_spsr_val; - struct pch_spi_data *data; - void __iomem *spsr; - void __iomem *io_remap_addr; - irqreturn_t ret = IRQ_NONE; - struct pch_spi_board_data *board_dat = dev_id; - - if (board_dat->suspend_sts) { - dev_dbg(&board_dat->pdev->dev, - "%s returning due to suspend\n", __func__); - return IRQ_NONE; - } - - data = board_dat->data; - io_remap_addr = data->io_remap_addr; - spsr = io_remap_addr + PCH_SPSR; - - reg_spsr_val = ioread32(spsr); - - /* Check if the interrupt is for SPI device */ - if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) { - pch_spi_handler_sub(data, reg_spsr_val, io_remap_addr); - ret = IRQ_HANDLED; - } - - dev_dbg(&board_dat->pdev->dev, "%s EXIT return value=%d\n", - __func__, ret); - - return ret; -} - -/** - * pch_spi_set_baud_rate() - Sets SPBR field in SPBRR - * @master: Pointer to struct spi_master. - * @speed_hz: Baud rate. - */ -static void pch_spi_set_baud_rate(struct spi_master *master, u32 speed_hz) -{ - u32 n_spbr = PCH_CLOCK_HZ / (speed_hz * 2); - - /* if baud rate is less than we can support limit it */ - if (n_spbr > PCH_MAX_SPBR) - n_spbr = PCH_MAX_SPBR; - - pch_spi_setclr_reg(master, PCH_SPBRR, n_spbr, ~MASK_SPBRR_SPBR_BITS); -} - -/** - * pch_spi_set_bits_per_word() - Sets SIZE field in SPBRR - * @master: Pointer to struct spi_master. - * @bits_per_word: Bits per word for SPI transfer. - */ -static void pch_spi_set_bits_per_word(struct spi_master *master, - u8 bits_per_word) -{ - if (bits_per_word == 8) - pch_spi_setclr_reg(master, PCH_SPBRR, 0, SPBRR_SIZE_BIT); - else - pch_spi_setclr_reg(master, PCH_SPBRR, SPBRR_SIZE_BIT, 0); -} - -/** - * pch_spi_setup_transfer() - Configures the PCH SPI hardware for transfer - * @spi: Pointer to struct spi_device. - */ -static void pch_spi_setup_transfer(struct spi_device *spi) -{ - u32 flags = 0; - - dev_dbg(&spi->dev, "%s SPBRR content =%x setting baud rate=%d\n", - __func__, pch_spi_readreg(spi->master, PCH_SPBRR), - spi->max_speed_hz); - pch_spi_set_baud_rate(spi->master, spi->max_speed_hz); - - /* set bits per word */ - pch_spi_set_bits_per_word(spi->master, spi->bits_per_word); - - if (!(spi->mode & SPI_LSB_FIRST)) - flags |= SPCR_LSBF_BIT; - if (spi->mode & SPI_CPOL) - flags |= SPCR_CPOL_BIT; - if (spi->mode & SPI_CPHA) - flags |= SPCR_CPHA_BIT; - pch_spi_setclr_reg(spi->master, PCH_SPCR, flags, - (SPCR_LSBF_BIT | SPCR_CPOL_BIT | SPCR_CPHA_BIT)); - - /* Clear the FIFO by toggling FICLR to 1 and back to 0 */ - pch_spi_clear_fifo(spi->master); -} - -/** - * pch_spi_reset() - Clears SPI registers - * @master: Pointer to struct spi_master. - */ -static void pch_spi_reset(struct spi_master *master) -{ - /* write 1 to reset SPI */ - pch_spi_writereg(master, PCH_SRST, 0x1); - - /* clear reset */ - pch_spi_writereg(master, PCH_SRST, 0x0); -} - -static int pch_spi_setup(struct spi_device *pspi) -{ - /* check bits per word */ - if (pspi->bits_per_word == 0) { - pspi->bits_per_word = 8; - dev_dbg(&pspi->dev, "%s 8 bits per word\n", __func__); - } - - if ((pspi->bits_per_word != 8) && (pspi->bits_per_word != 16)) { - dev_err(&pspi->dev, "%s Invalid bits per word\n", __func__); - return -EINVAL; - } - - /* Check baud rate setting */ - /* if baud rate of chip is greater than - max we can support,return error */ - if ((pspi->max_speed_hz) > PCH_MAX_BAUDRATE) - pspi->max_speed_hz = PCH_MAX_BAUDRATE; - - dev_dbg(&pspi->dev, "%s MODE = %x\n", __func__, - (pspi->mode) & (SPI_CPOL | SPI_CPHA)); - - return 0; -} - -static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) -{ - - struct spi_transfer *transfer; - struct pch_spi_data *data = spi_master_get_devdata(pspi->master); - int retval; - unsigned long flags; - - /* validate spi message and baud rate */ - if (unlikely(list_empty(&pmsg->transfers) == 1)) { - dev_err(&pspi->dev, "%s list empty\n", __func__); - retval = -EINVAL; - goto err_out; - } - - if (unlikely(pspi->max_speed_hz == 0)) { - dev_err(&pspi->dev, "%s pch_spi_tranfer maxspeed=%d\n", - __func__, pspi->max_speed_hz); - retval = -EINVAL; - goto err_out; - } - - dev_dbg(&pspi->dev, "%s Transfer List not empty. " - "Transfer Speed is set.\n", __func__); - - /* validate Tx/Rx buffers and Transfer length */ - list_for_each_entry(transfer, &pmsg->transfers, transfer_list) { - if (!transfer->tx_buf && !transfer->rx_buf) { - dev_err(&pspi->dev, - "%s Tx and Rx buffer NULL\n", __func__); - retval = -EINVAL; - goto err_out; - } - - if (!transfer->len) { - dev_err(&pspi->dev, "%s Transfer length invalid\n", - __func__); - retval = -EINVAL; - goto err_out; - } - - dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length" - " valid\n", __func__); - - /* if baud rate hs been specified validate the same */ - if (transfer->speed_hz > PCH_MAX_BAUDRATE) - transfer->speed_hz = PCH_MAX_BAUDRATE; - - /* if bits per word has been specified validate the same */ - if (transfer->bits_per_word) { - if ((transfer->bits_per_word != 8) - && (transfer->bits_per_word != 16)) { - retval = -EINVAL; - dev_err(&pspi->dev, - "%s Invalid bits per word\n", __func__); - goto err_out; - } - } - } - - spin_lock_irqsave(&data->lock, flags); - - /* We won't process any messages if we have been asked to terminate */ - if (data->status == STATUS_EXITING) { - dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__); - retval = -ESHUTDOWN; - goto err_return_spinlock; - } - - /* If suspended ,return -EINVAL */ - if (data->board_dat->suspend_sts) { - dev_err(&pspi->dev, "%s suspend; returning EINVAL\n", __func__); - retval = -EINVAL; - goto err_return_spinlock; - } - - /* set status of message */ - pmsg->actual_length = 0; - dev_dbg(&pspi->dev, "%s - pmsg->status =%d\n", __func__, pmsg->status); - - pmsg->status = -EINPROGRESS; - - /* add message to queue */ - list_add_tail(&pmsg->queue, &data->queue); - dev_dbg(&pspi->dev, "%s - Invoked list_add_tail\n", __func__); - - /* schedule work queue to run */ - queue_work(data->wk, &data->work); - dev_dbg(&pspi->dev, "%s - Invoked queue work\n", __func__); - - retval = 0; - -err_return_spinlock: - spin_unlock_irqrestore(&data->lock, flags); -err_out: - dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval); - return retval; -} - -static inline void pch_spi_select_chip(struct pch_spi_data *data, - struct spi_device *pspi) -{ - if (data->current_chip != NULL) { - if (pspi->chip_select != data->n_curnt_chip) { - dev_dbg(&pspi->dev, "%s : different slave\n", __func__); - data->current_chip = NULL; - } - } - - data->current_chip = pspi; - - data->n_curnt_chip = data->current_chip->chip_select; - - dev_dbg(&pspi->dev, "%s :Invoking pch_spi_setup_transfer\n", __func__); - pch_spi_setup_transfer(pspi); -} - -static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, - struct spi_message **ppmsg) -{ - int size; - u32 n_writes; - int j; - struct spi_message *pmsg; - const u8 *tx_buf; - const u16 *tx_sbuf; - - pmsg = *ppmsg; - - /* set baud rate if needed */ - if (data->cur_trans->speed_hz) { - dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__); - pch_spi_set_baud_rate(data->master, data->cur_trans->speed_hz); - } - - /* set bits per word if needed */ - if (data->cur_trans->bits_per_word && - (data->current_msg->spi->bits_per_word != data->cur_trans->bits_per_word)) { - dev_dbg(&data->master->dev, "%s:set bits per word\n", __func__); - pch_spi_set_bits_per_word(data->master, - data->cur_trans->bits_per_word); - *bpw = data->cur_trans->bits_per_word; - } else { - *bpw = data->current_msg->spi->bits_per_word; - } - - /* reset Tx/Rx index */ - data->tx_index = 0; - data->rx_index = 0; - - data->bpw_len = data->cur_trans->len / (*bpw / 8); - - /* find alloc size */ - size = data->cur_trans->len * sizeof(*data->pkt_tx_buff); - - /* allocate memory for pkt_tx_buff & pkt_rx_buffer */ - data->pkt_tx_buff = kzalloc(size, GFP_KERNEL); - if (data->pkt_tx_buff != NULL) { - data->pkt_rx_buff = kzalloc(size, GFP_KERNEL); - if (!data->pkt_rx_buff) - kfree(data->pkt_tx_buff); - } - - if (!data->pkt_rx_buff) { - /* flush queue and set status of all transfers to -ENOMEM */ - dev_err(&data->master->dev, "%s :kzalloc failed\n", __func__); - list_for_each_entry(pmsg, data->queue.next, queue) { - pmsg->status = -ENOMEM; - - if (pmsg->complete != 0) - pmsg->complete(pmsg->context); - - /* delete from queue */ - list_del_init(&pmsg->queue); - } - return; - } - - /* copy Tx Data */ - if (data->cur_trans->tx_buf != NULL) { - if (*bpw == 8) { - tx_buf = data->cur_trans->tx_buf; - for (j = 0; j < data->bpw_len; j++) - data->pkt_tx_buff[j] = *tx_buf++; - } else { - tx_sbuf = data->cur_trans->tx_buf; - for (j = 0; j < data->bpw_len; j++) - data->pkt_tx_buff[j] = *tx_sbuf++; - } - } - - /* if len greater than PCH_MAX_FIFO_DEPTH, write 16,else len bytes */ - n_writes = data->bpw_len; - if (n_writes > PCH_MAX_FIFO_DEPTH) - n_writes = PCH_MAX_FIFO_DEPTH; - - dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing " - "0x2 to SSNXCR\n", __func__); - pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW); - - for (j = 0; j < n_writes; j++) - pch_spi_writereg(data->master, PCH_SPDWR, data->pkt_tx_buff[j]); - - /* update tx_index */ - data->tx_index = j; - - /* reset transfer complete flag */ - data->transfer_complete = false; - data->transfer_active = true; -} - - -static void pch_spi_nomore_transfer(struct pch_spi_data *data, - struct spi_message *pmsg) -{ - dev_dbg(&data->master->dev, "%s called\n", __func__); - /* Invoke complete callback - * [To the spi core..indicating end of transfer] */ - data->current_msg->status = 0; - - if (data->current_msg->complete != 0) { - dev_dbg(&data->master->dev, - "%s:Invoking callback of SPI core\n", __func__); - data->current_msg->complete(data->current_msg->context); - } - - /* update status in global variable */ - data->bcurrent_msg_processing = false; - - dev_dbg(&data->master->dev, - "%s:data->bcurrent_msg_processing = false\n", __func__); - - data->current_msg = NULL; - data->cur_trans = NULL; - - /* check if we have items in list and not suspending - * return 1 if list empty */ - if ((list_empty(&data->queue) == 0) && - (!data->board_dat->suspend_sts) && - (data->status != STATUS_EXITING)) { - /* We have some more work to do (either there is more tranint - * bpw;sfer requests in the current message or there are - *more messages) - */ - dev_dbg(&data->master->dev, "%s:Invoke queue_work\n", __func__); - queue_work(data->wk, &data->work); - } else if (data->board_dat->suspend_sts || - data->status == STATUS_EXITING) { - dev_dbg(&data->master->dev, - "%s suspend/remove initiated, flushing queue\n", - __func__); - list_for_each_entry(pmsg, data->queue.next, queue) { - pmsg->status = -EIO; - - if (pmsg->complete) - pmsg->complete(pmsg->context); - - /* delete from queue */ - list_del_init(&pmsg->queue); - } - } -} - -static void pch_spi_set_ir(struct pch_spi_data *data) -{ - /* enable interrupts */ - if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) { - /* set receive threshold to PCH_RX_THOLD */ - pch_spi_setclr_reg(data->master, PCH_SPCR, - PCH_RX_THOLD << SPCR_RFIC_FIELD, - ~MASK_RFIC_SPCR_BITS); - /* enable FI and RFI interrupts */ - pch_spi_setclr_reg(data->master, PCH_SPCR, - SPCR_RFIE_BIT | SPCR_FIE_BIT, 0); - } else { - /* set receive threshold to maximum */ - pch_spi_setclr_reg(data->master, PCH_SPCR, - PCH_RX_THOLD_MAX << SPCR_TFIC_FIELD, - ~MASK_TFIC_SPCR_BITS); - /* enable FI interrupt */ - pch_spi_setclr_reg(data->master, PCH_SPCR, SPCR_FIE_BIT, 0); - } - - dev_dbg(&data->master->dev, - "%s:invoking pch_spi_set_enable to enable SPI\n", __func__); - - /* SPI set enable */ - pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, SPCR_SPE_BIT, 0); - - /* Wait until the transfer completes; go to sleep after - initiating the transfer. */ - dev_dbg(&data->master->dev, - "%s:waiting for transfer to get over\n", __func__); - - wait_event_interruptible(data->wait, data->transfer_complete); - - pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL); - dev_dbg(&data->master->dev, - "%s:no more control over SSN-writing 0 to SSNXCR.", __func__); - - data->transfer_active = false; - dev_dbg(&data->master->dev, - "%s set data->transfer_active = false\n", __func__); - - /* clear all interrupts */ - pch_spi_writereg(data->master, PCH_SPSR, - pch_spi_readreg(data->master, PCH_SPSR)); - /* disable interrupts */ - pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL); -} - -static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw) -{ - int j; - u8 *rx_buf; - u16 *rx_sbuf; - - /* copy Rx Data */ - if (!data->cur_trans->rx_buf) - return; - - if (bpw == 8) { - rx_buf = data->cur_trans->rx_buf; - for (j = 0; j < data->bpw_len; j++) - *rx_buf++ = data->pkt_rx_buff[j] & 0xFF; - } else { - rx_sbuf = data->cur_trans->rx_buf; - for (j = 0; j < data->bpw_len; j++) - *rx_sbuf++ = data->pkt_rx_buff[j]; - } -} - - -static void pch_spi_process_messages(struct work_struct *pwork) -{ - struct spi_message *pmsg; - struct pch_spi_data *data; - int bpw; - - data = container_of(pwork, struct pch_spi_data, work); - dev_dbg(&data->master->dev, "%s data initialized\n", __func__); - - spin_lock(&data->lock); - - /* check if suspend has been initiated;if yes flush queue */ - if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) { - dev_dbg(&data->master->dev, - "%s suspend/remove initiated,flushing queue\n", - __func__); - - list_for_each_entry(pmsg, data->queue.next, queue) { - pmsg->status = -EIO; - - if (pmsg->complete != 0) { - spin_unlock(&data->lock); - pmsg->complete(pmsg->context); - spin_lock(&data->lock); - } - - /* delete from queue */ - list_del_init(&pmsg->queue); - } - - spin_unlock(&data->lock); - return; - } - - data->bcurrent_msg_processing = true; - dev_dbg(&data->master->dev, - "%s Set data->bcurrent_msg_processing= true\n", __func__); - - /* Get the message from the queue and delete it from there. */ - data->current_msg = list_entry(data->queue.next, struct spi_message, - queue); - - list_del_init(&data->current_msg->queue); - - data->current_msg->status = 0; - - pch_spi_select_chip(data, data->current_msg->spi); - - spin_unlock(&data->lock); - - do { - /* If we are already processing a message get the next - transfer structure from the message otherwise retrieve - the 1st transfer request from the message. */ - spin_lock(&data->lock); - - if (data->cur_trans == NULL) { - data->cur_trans = - list_entry(data->current_msg->transfers. - next, struct spi_transfer, - transfer_list); - dev_dbg(&data->master->dev, - "%s :Getting 1st transfer message\n", __func__); - } else { - data->cur_trans = - list_entry(data->cur_trans->transfer_list.next, - struct spi_transfer, - transfer_list); - dev_dbg(&data->master->dev, - "%s :Getting next transfer message\n", - __func__); - } - - spin_unlock(&data->lock); - - pch_spi_set_tx(data, &bpw, &pmsg); - - /* Control interrupt*/ - pch_spi_set_ir(data); - - /* Disable SPI transfer */ - pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, 0, - SPCR_SPE_BIT); - - /* clear FIFO */ - pch_spi_clear_fifo(data->master); - - /* copy Rx Data */ - pch_spi_copy_rx_data(data, bpw); - - /* free memory */ - kfree(data->pkt_rx_buff); - data->pkt_rx_buff = NULL; - - kfree(data->pkt_tx_buff); - data->pkt_tx_buff = NULL; - - /* increment message count */ - data->current_msg->actual_length += data->cur_trans->len; - - dev_dbg(&data->master->dev, - "%s:data->current_msg->actual_length=%d\n", - __func__, data->current_msg->actual_length); - - /* check for delay */ - if (data->cur_trans->delay_usecs) { - dev_dbg(&data->master->dev, "%s:" - "delay in usec=%d\n", __func__, - data->cur_trans->delay_usecs); - udelay(data->cur_trans->delay_usecs); - } - - spin_lock(&data->lock); - - /* No more transfer in this message. */ - if ((data->cur_trans->transfer_list.next) == - &(data->current_msg->transfers)) { - pch_spi_nomore_transfer(data, pmsg); - } - - spin_unlock(&data->lock); - - } while (data->cur_trans != NULL); -} - -static void pch_spi_free_resources(struct pch_spi_board_data *board_dat) -{ - dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); - - /* free workqueue */ - if (board_dat->data->wk != NULL) { - destroy_workqueue(board_dat->data->wk); - board_dat->data->wk = NULL; - dev_dbg(&board_dat->pdev->dev, - "%s destroy_workqueue invoked successfully\n", - __func__); - } - - /* disable interrupts & free IRQ */ - if (board_dat->irq_reg_sts) { - /* disable interrupts */ - pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, - PCH_ALL); - - /* free IRQ */ - free_irq(board_dat->pdev->irq, board_dat); - - dev_dbg(&board_dat->pdev->dev, - "%s free_irq invoked successfully\n", __func__); - - board_dat->irq_reg_sts = false; - } - - /* unmap PCI base address */ - if (board_dat->data->io_remap_addr != 0) { - pci_iounmap(board_dat->pdev, board_dat->data->io_remap_addr); - - board_dat->data->io_remap_addr = 0; - - dev_dbg(&board_dat->pdev->dev, - "%s pci_iounmap invoked successfully\n", __func__); - } - - /* release PCI region */ - if (board_dat->pci_req_sts) { - pci_release_regions(board_dat->pdev); - dev_dbg(&board_dat->pdev->dev, - "%s pci_release_regions invoked successfully\n", - __func__); - board_dat->pci_req_sts = false; - } -} - -static int pch_spi_get_resources(struct pch_spi_board_data *board_dat) -{ - void __iomem *io_remap_addr; - int retval; - dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); - - /* create workqueue */ - board_dat->data->wk = create_singlethread_workqueue(KBUILD_MODNAME); - if (!board_dat->data->wk) { - dev_err(&board_dat->pdev->dev, - "%s create_singlet hread_workqueue failed\n", __func__); - retval = -EBUSY; - goto err_return; - } - - dev_dbg(&board_dat->pdev->dev, - "%s create_singlethread_workqueue success\n", __func__); - - retval = pci_request_regions(board_dat->pdev, KBUILD_MODNAME); - if (retval != 0) { - dev_err(&board_dat->pdev->dev, - "%s request_region failed\n", __func__); - goto err_return; - } - - board_dat->pci_req_sts = true; - - io_remap_addr = pci_iomap(board_dat->pdev, 1, 0); - if (io_remap_addr == 0) { - dev_err(&board_dat->pdev->dev, - "%s pci_iomap failed\n", __func__); - retval = -ENOMEM; - goto err_return; - } - - /* calculate base address for all channels */ - board_dat->data->io_remap_addr = io_remap_addr; - - /* reset PCH SPI h/w */ - pch_spi_reset(board_dat->data->master); - dev_dbg(&board_dat->pdev->dev, - "%s pch_spi_reset invoked successfully\n", __func__); - - /* register IRQ */ - retval = request_irq(board_dat->pdev->irq, pch_spi_handler, - IRQF_SHARED, KBUILD_MODNAME, board_dat); - if (retval != 0) { - dev_err(&board_dat->pdev->dev, - "%s request_irq failed\n", __func__); - goto err_return; - } - - dev_dbg(&board_dat->pdev->dev, "%s request_irq returned=%d\n", - __func__, retval); - - board_dat->irq_reg_sts = true; - dev_dbg(&board_dat->pdev->dev, "%s data->irq_reg_sts=true\n", __func__); - -err_return: - if (retval != 0) { - dev_err(&board_dat->pdev->dev, - "%s FAIL:invoking pch_spi_free_resources\n", __func__); - pch_spi_free_resources(board_dat); - } - - dev_dbg(&board_dat->pdev->dev, "%s Return=%d\n", __func__, retval); - - return retval; -} - -static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id) -{ - - struct spi_master *master; - - struct pch_spi_board_data *board_dat; - int retval; - - dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); - - /* allocate memory for private data */ - board_dat = kzalloc(sizeof(struct pch_spi_board_data), GFP_KERNEL); - if (board_dat == NULL) { - dev_err(&pdev->dev, - " %s memory allocation for private data failed\n", - __func__); - retval = -ENOMEM; - goto err_kmalloc; - } - - dev_dbg(&pdev->dev, - "%s memory allocation for private data success\n", __func__); - - /* enable PCI device */ - retval = pci_enable_device(pdev); - if (retval != 0) { - dev_err(&pdev->dev, "%s pci_enable_device FAILED\n", __func__); - - goto err_pci_en_device; - } - - dev_dbg(&pdev->dev, "%s pci_enable_device returned=%d\n", - __func__, retval); - - board_dat->pdev = pdev; - - /* alllocate memory for SPI master */ - master = spi_alloc_master(&pdev->dev, sizeof(struct pch_spi_data)); - if (master == NULL) { - retval = -ENOMEM; - dev_err(&pdev->dev, "%s Fail.\n", __func__); - goto err_spi_alloc_master; - } - - dev_dbg(&pdev->dev, - "%s spi_alloc_master returned non NULL\n", __func__); - - /* initialize members of SPI master */ - master->bus_num = -1; - master->num_chipselect = PCH_MAX_CS; - master->setup = pch_spi_setup; - master->transfer = pch_spi_transfer; - dev_dbg(&pdev->dev, - "%s transfer member of SPI master initialized\n", __func__); - - board_dat->data = spi_master_get_devdata(master); - - board_dat->data->master = master; - board_dat->data->n_curnt_chip = 255; - board_dat->data->board_dat = board_dat; - board_dat->data->status = STATUS_RUNNING; - - INIT_LIST_HEAD(&board_dat->data->queue); - spin_lock_init(&board_dat->data->lock); - INIT_WORK(&board_dat->data->work, pch_spi_process_messages); - init_waitqueue_head(&board_dat->data->wait); - - /* allocate resources for PCH SPI */ - retval = pch_spi_get_resources(board_dat); - if (retval) { - dev_err(&pdev->dev, "%s fail(retval=%d)\n", __func__, retval); - goto err_spi_get_resources; - } - - dev_dbg(&pdev->dev, "%s pch_spi_get_resources returned=%d\n", - __func__, retval); - - /* save private data in dev */ - pci_set_drvdata(pdev, board_dat); - dev_dbg(&pdev->dev, "%s invoked pci_set_drvdata\n", __func__); - - /* set master mode */ - pch_spi_set_master_mode(master); - dev_dbg(&pdev->dev, - "%s invoked pch_spi_set_master_mode\n", __func__); - - /* Register the controller with the SPI core. */ - retval = spi_register_master(master); - if (retval != 0) { - dev_err(&pdev->dev, - "%s spi_register_master FAILED\n", __func__); - goto err_spi_reg_master; - } - - dev_dbg(&pdev->dev, "%s spi_register_master returned=%d\n", - __func__, retval); - - - return 0; - -err_spi_reg_master: - spi_unregister_master(master); -err_spi_get_resources: -err_spi_alloc_master: - spi_master_put(master); - pci_disable_device(pdev); -err_pci_en_device: - kfree(board_dat); -err_kmalloc: - return retval; -} - -static void pch_spi_remove(struct pci_dev *pdev) -{ - struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); - int count; - - dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); - - if (!board_dat) { - dev_err(&pdev->dev, - "%s pci_get_drvdata returned NULL\n", __func__); - return; - } - - /* check for any pending messages; no action is taken if the queue - * is still full; but at least we tried. Unload anyway */ - count = 500; - spin_lock(&board_dat->data->lock); - board_dat->data->status = STATUS_EXITING; - while ((list_empty(&board_dat->data->queue) == 0) && --count) { - dev_dbg(&board_dat->pdev->dev, "%s :queue not empty\n", - __func__); - spin_unlock(&board_dat->data->lock); - msleep(PCH_SLEEP_TIME); - spin_lock(&board_dat->data->lock); - } - spin_unlock(&board_dat->data->lock); - - /* Free resources allocated for PCH SPI */ - pch_spi_free_resources(board_dat); - - spi_unregister_master(board_dat->data->master); - - /* free memory for private data */ - kfree(board_dat); - - pci_set_drvdata(pdev, NULL); - - /* disable PCI device */ - pci_disable_device(pdev); - - dev_dbg(&pdev->dev, "%s invoked pci_disable_device\n", __func__); -} - -#ifdef CONFIG_PM -static int pch_spi_suspend(struct pci_dev *pdev, pm_message_t state) -{ - u8 count; - int retval; - - struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); - - dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); - - if (!board_dat) { - dev_err(&pdev->dev, - "%s pci_get_drvdata returned NULL\n", __func__); - return -EFAULT; - } - - retval = 0; - board_dat->suspend_sts = true; - - /* check if the current message is processed: - Only after thats done the transfer will be suspended */ - count = 255; - while ((--count) > 0) { - if (!(board_dat->data->bcurrent_msg_processing)) { - dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_" - "msg_processing = false\n", __func__); - break; - } else { - dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_msg_" - "processing = true\n", __func__); - } - msleep(PCH_SLEEP_TIME); - } - - /* Free IRQ */ - if (board_dat->irq_reg_sts) { - /* disable all interrupts */ - pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, - PCH_ALL); - pch_spi_reset(board_dat->data->master); - - free_irq(board_dat->pdev->irq, board_dat); - - board_dat->irq_reg_sts = false; - dev_dbg(&pdev->dev, - "%s free_irq invoked successfully.\n", __func__); - } - - /* save config space */ - retval = pci_save_state(pdev); - - if (retval == 0) { - dev_dbg(&pdev->dev, "%s pci_save_state returned=%d\n", - __func__, retval); - /* disable PM notifications */ - pci_enable_wake(pdev, PCI_D3hot, 0); - dev_dbg(&pdev->dev, - "%s pci_enable_wake invoked successfully\n", __func__); - /* disable PCI device */ - pci_disable_device(pdev); - dev_dbg(&pdev->dev, - "%s pci_disable_device invoked successfully\n", - __func__); - /* move device to D3hot state */ - pci_set_power_state(pdev, PCI_D3hot); - dev_dbg(&pdev->dev, - "%s pci_set_power_state invoked successfully\n", - __func__); - } else { - dev_err(&pdev->dev, "%s pci_save_state failed\n", __func__); - } - - dev_dbg(&pdev->dev, "%s return=%d\n", __func__, retval); - - return retval; -} - -static int pch_spi_resume(struct pci_dev *pdev) -{ - int retval; - - struct pch_spi_board_data *board = pci_get_drvdata(pdev); - dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); - - if (!board) { - dev_err(&pdev->dev, - "%s pci_get_drvdata returned NULL\n", __func__); - return -EFAULT; - } - - /* move device to DO power state */ - pci_set_power_state(pdev, PCI_D0); - - /* restore state */ - pci_restore_state(pdev); - - retval = pci_enable_device(pdev); - if (retval < 0) { - dev_err(&pdev->dev, - "%s pci_enable_device failed\n", __func__); - } else { - /* disable PM notifications */ - pci_enable_wake(pdev, PCI_D3hot, 0); - - /* register IRQ handler */ - if (!board->irq_reg_sts) { - /* register IRQ */ - retval = request_irq(board->pdev->irq, pch_spi_handler, - IRQF_SHARED, KBUILD_MODNAME, - board); - if (retval < 0) { - dev_err(&pdev->dev, - "%s request_irq failed\n", __func__); - return retval; - } - board->irq_reg_sts = true; - - /* reset PCH SPI h/w */ - pch_spi_reset(board->data->master); - pch_spi_set_master_mode(board->data->master); - - /* set suspend status to false */ - board->suspend_sts = false; - - } - } - - dev_dbg(&pdev->dev, "%s returning=%d\n", __func__, retval); - - return retval; -} -#else -#define pch_spi_suspend NULL -#define pch_spi_resume NULL - -#endif - -static struct pci_driver pch_spi_pcidev = { - .name = "pch_spi", - .id_table = pch_spi_pcidev_id, - .probe = pch_spi_probe, - .remove = pch_spi_remove, - .suspend = pch_spi_suspend, - .resume = pch_spi_resume, -}; - -static int __init pch_spi_init(void) -{ - return pci_register_driver(&pch_spi_pcidev); -} -module_init(pch_spi_init); - -static void __exit pch_spi_exit(void) -{ - pci_unregister_driver(&pch_spi_pcidev); -} -module_exit(pch_spi_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Topcliff PCH SPI PCI Driver"); diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c deleted file mode 100644 index dfa024b633e1..000000000000 --- a/drivers/spi/spi_txx9.c +++ /dev/null @@ -1,472 +0,0 @@ -/* - * spi_txx9.c - TXx9 SPI controller driver. - * - * Based on linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - * - * Convert to generic SPI framework - Atsushi Nemoto (anemo@mba.ocn.ne.jp) - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#define SPI_FIFO_SIZE 4 -#define SPI_MAX_DIVIDER 0xff /* Max. value for SPCR1.SER */ -#define SPI_MIN_DIVIDER 1 /* Min. value for SPCR1.SER */ - -#define TXx9_SPMCR 0x00 -#define TXx9_SPCR0 0x04 -#define TXx9_SPCR1 0x08 -#define TXx9_SPFS 0x0c -#define TXx9_SPSR 0x14 -#define TXx9_SPDR 0x18 - -/* SPMCR : SPI Master Control */ -#define TXx9_SPMCR_OPMODE 0xc0 -#define TXx9_SPMCR_CONFIG 0x40 -#define TXx9_SPMCR_ACTIVE 0x80 -#define TXx9_SPMCR_SPSTP 0x02 -#define TXx9_SPMCR_BCLR 0x01 - -/* SPCR0 : SPI Control 0 */ -#define TXx9_SPCR0_TXIFL_MASK 0xc000 -#define TXx9_SPCR0_RXIFL_MASK 0x3000 -#define TXx9_SPCR0_SIDIE 0x0800 -#define TXx9_SPCR0_SOEIE 0x0400 -#define TXx9_SPCR0_RBSIE 0x0200 -#define TXx9_SPCR0_TBSIE 0x0100 -#define TXx9_SPCR0_IFSPSE 0x0010 -#define TXx9_SPCR0_SBOS 0x0004 -#define TXx9_SPCR0_SPHA 0x0002 -#define TXx9_SPCR0_SPOL 0x0001 - -/* SPSR : SPI Status */ -#define TXx9_SPSR_TBSI 0x8000 -#define TXx9_SPSR_RBSI 0x4000 -#define TXx9_SPSR_TBS_MASK 0x3800 -#define TXx9_SPSR_RBS_MASK 0x0700 -#define TXx9_SPSR_SPOE 0x0080 -#define TXx9_SPSR_IFSD 0x0008 -#define TXx9_SPSR_SIDLE 0x0004 -#define TXx9_SPSR_STRDY 0x0002 -#define TXx9_SPSR_SRRDY 0x0001 - - -struct txx9spi { - struct workqueue_struct *workqueue; - struct work_struct work; - spinlock_t lock; /* protect 'queue' */ - struct list_head queue; - wait_queue_head_t waitq; - void __iomem *membase; - int baseclk; - struct clk *clk; - u32 max_speed_hz, min_speed_hz; - int last_chipselect; - int last_chipselect_val; -}; - -static u32 txx9spi_rd(struct txx9spi *c, int reg) -{ - return __raw_readl(c->membase + reg); -} -static void txx9spi_wr(struct txx9spi *c, u32 val, int reg) -{ - __raw_writel(val, c->membase + reg); -} - -static void txx9spi_cs_func(struct spi_device *spi, struct txx9spi *c, - int on, unsigned int cs_delay) -{ - int val = (spi->mode & SPI_CS_HIGH) ? on : !on; - if (on) { - /* deselect the chip with cs_change hint in last transfer */ - if (c->last_chipselect >= 0) - gpio_set_value(c->last_chipselect, - !c->last_chipselect_val); - c->last_chipselect = spi->chip_select; - c->last_chipselect_val = val; - } else { - c->last_chipselect = -1; - ndelay(cs_delay); /* CS Hold Time */ - } - gpio_set_value(spi->chip_select, val); - ndelay(cs_delay); /* CS Setup Time / CS Recovery Time */ -} - -static int txx9spi_setup(struct spi_device *spi) -{ - struct txx9spi *c = spi_master_get_devdata(spi->master); - u8 bits_per_word; - - if (!spi->max_speed_hz - || spi->max_speed_hz > c->max_speed_hz - || spi->max_speed_hz < c->min_speed_hz) - return -EINVAL; - - bits_per_word = spi->bits_per_word; - if (bits_per_word != 8 && bits_per_word != 16) - return -EINVAL; - - if (gpio_direction_output(spi->chip_select, - !(spi->mode & SPI_CS_HIGH))) { - dev_err(&spi->dev, "Cannot setup GPIO for chipselect.\n"); - return -EINVAL; - } - - /* deselect chip */ - spin_lock(&c->lock); - txx9spi_cs_func(spi, c, 0, (NSEC_PER_SEC / 2) / spi->max_speed_hz); - spin_unlock(&c->lock); - - return 0; -} - -static irqreturn_t txx9spi_interrupt(int irq, void *dev_id) -{ - struct txx9spi *c = dev_id; - - /* disable rx intr */ - txx9spi_wr(c, txx9spi_rd(c, TXx9_SPCR0) & ~TXx9_SPCR0_RBSIE, - TXx9_SPCR0); - wake_up(&c->waitq); - return IRQ_HANDLED; -} - -static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m) -{ - struct spi_device *spi = m->spi; - struct spi_transfer *t; - unsigned int cs_delay; - unsigned int cs_change = 1; - int status = 0; - u32 mcr; - u32 prev_speed_hz = 0; - u8 prev_bits_per_word = 0; - - /* CS setup/hold/recovery time in nsec */ - cs_delay = 100 + (NSEC_PER_SEC / 2) / spi->max_speed_hz; - - mcr = txx9spi_rd(c, TXx9_SPMCR); - if (unlikely((mcr & TXx9_SPMCR_OPMODE) == TXx9_SPMCR_ACTIVE)) { - dev_err(&spi->dev, "Bad mode.\n"); - status = -EIO; - goto exit; - } - mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR); - - /* enter config mode */ - txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR); - txx9spi_wr(c, TXx9_SPCR0_SBOS - | ((spi->mode & SPI_CPOL) ? TXx9_SPCR0_SPOL : 0) - | ((spi->mode & SPI_CPHA) ? TXx9_SPCR0_SPHA : 0) - | 0x08, - TXx9_SPCR0); - - list_for_each_entry (t, &m->transfers, transfer_list) { - const void *txbuf = t->tx_buf; - void *rxbuf = t->rx_buf; - u32 data; - unsigned int len = t->len; - unsigned int wsize; - u32 speed_hz = t->speed_hz ? : spi->max_speed_hz; - u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word; - - bits_per_word = bits_per_word ? : 8; - wsize = bits_per_word >> 3; /* in bytes */ - - if (prev_speed_hz != speed_hz - || prev_bits_per_word != bits_per_word) { - int n = DIV_ROUND_UP(c->baseclk, speed_hz) - 1; - n = clamp(n, SPI_MIN_DIVIDER, SPI_MAX_DIVIDER); - /* enter config mode */ - txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, - TXx9_SPMCR); - txx9spi_wr(c, (n << 8) | bits_per_word, TXx9_SPCR1); - /* enter active mode */ - txx9spi_wr(c, mcr | TXx9_SPMCR_ACTIVE, TXx9_SPMCR); - - prev_speed_hz = speed_hz; - prev_bits_per_word = bits_per_word; - } - - if (cs_change) - txx9spi_cs_func(spi, c, 1, cs_delay); - cs_change = t->cs_change; - while (len) { - unsigned int count = SPI_FIFO_SIZE; - int i; - u32 cr0; - - if (len < count * wsize) - count = len / wsize; - /* now tx must be idle... */ - while (!(txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_SIDLE)) - cpu_relax(); - cr0 = txx9spi_rd(c, TXx9_SPCR0); - cr0 &= ~TXx9_SPCR0_RXIFL_MASK; - cr0 |= (count - 1) << 12; - /* enable rx intr */ - cr0 |= TXx9_SPCR0_RBSIE; - txx9spi_wr(c, cr0, TXx9_SPCR0); - /* send */ - for (i = 0; i < count; i++) { - if (txbuf) { - data = (wsize == 1) - ? *(const u8 *)txbuf - : *(const u16 *)txbuf; - txx9spi_wr(c, data, TXx9_SPDR); - txbuf += wsize; - } else - txx9spi_wr(c, 0, TXx9_SPDR); - } - /* wait all rx data */ - wait_event(c->waitq, - txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_RBSI); - /* receive */ - for (i = 0; i < count; i++) { - data = txx9spi_rd(c, TXx9_SPDR); - if (rxbuf) { - if (wsize == 1) - *(u8 *)rxbuf = data; - else - *(u16 *)rxbuf = data; - rxbuf += wsize; - } - } - len -= count * wsize; - } - m->actual_length += t->len; - if (t->delay_usecs) - udelay(t->delay_usecs); - - if (!cs_change) - continue; - if (t->transfer_list.next == &m->transfers) - break; - /* sometimes a short mid-message deselect of the chip - * may be needed to terminate a mode or command - */ - txx9spi_cs_func(spi, c, 0, cs_delay); - } - -exit: - m->status = status; - m->complete(m->context); - - /* normally deactivate chipselect ... unless no error and - * cs_change has hinted that the next message will probably - * be for this chip too. - */ - if (!(status == 0 && cs_change)) - txx9spi_cs_func(spi, c, 0, cs_delay); - - /* enter config mode */ - txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR); -} - -static void txx9spi_work(struct work_struct *work) -{ - struct txx9spi *c = container_of(work, struct txx9spi, work); - unsigned long flags; - - spin_lock_irqsave(&c->lock, flags); - while (!list_empty(&c->queue)) { - struct spi_message *m; - - m = container_of(c->queue.next, struct spi_message, queue); - list_del_init(&m->queue); - spin_unlock_irqrestore(&c->lock, flags); - - txx9spi_work_one(c, m); - - spin_lock_irqsave(&c->lock, flags); - } - spin_unlock_irqrestore(&c->lock, flags); -} - -static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m) -{ - struct spi_master *master = spi->master; - struct txx9spi *c = spi_master_get_devdata(master); - struct spi_transfer *t; - unsigned long flags; - - m->actual_length = 0; - - /* check each transfer's parameters */ - list_for_each_entry (t, &m->transfers, transfer_list) { - u32 speed_hz = t->speed_hz ? : spi->max_speed_hz; - u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word; - - bits_per_word = bits_per_word ? : 8; - if (!t->tx_buf && !t->rx_buf && t->len) - return -EINVAL; - if (bits_per_word != 8 && bits_per_word != 16) - return -EINVAL; - if (t->len & ((bits_per_word >> 3) - 1)) - return -EINVAL; - if (speed_hz < c->min_speed_hz || speed_hz > c->max_speed_hz) - return -EINVAL; - } - - spin_lock_irqsave(&c->lock, flags); - list_add_tail(&m->queue, &c->queue); - queue_work(c->workqueue, &c->work); - spin_unlock_irqrestore(&c->lock, flags); - - return 0; -} - -static int __init txx9spi_probe(struct platform_device *dev) -{ - struct spi_master *master; - struct txx9spi *c; - struct resource *res; - int ret = -ENODEV; - u32 mcr; - int irq; - - master = spi_alloc_master(&dev->dev, sizeof(*c)); - if (!master) - return ret; - c = spi_master_get_devdata(master); - platform_set_drvdata(dev, master); - - INIT_WORK(&c->work, txx9spi_work); - spin_lock_init(&c->lock); - INIT_LIST_HEAD(&c->queue); - init_waitqueue_head(&c->waitq); - - c->clk = clk_get(&dev->dev, "spi-baseclk"); - if (IS_ERR(c->clk)) { - ret = PTR_ERR(c->clk); - c->clk = NULL; - goto exit; - } - ret = clk_enable(c->clk); - if (ret) { - clk_put(c->clk); - c->clk = NULL; - goto exit; - } - c->baseclk = clk_get_rate(c->clk); - c->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1); - c->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1); - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) - goto exit_busy; - if (!devm_request_mem_region(&dev->dev, res->start, resource_size(res), - "spi_txx9")) - goto exit_busy; - c->membase = devm_ioremap(&dev->dev, res->start, resource_size(res)); - if (!c->membase) - goto exit_busy; - - /* enter config mode */ - mcr = txx9spi_rd(c, TXx9_SPMCR); - mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR); - txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR); - - irq = platform_get_irq(dev, 0); - if (irq < 0) - goto exit_busy; - ret = devm_request_irq(&dev->dev, irq, txx9spi_interrupt, 0, - "spi_txx9", c); - if (ret) - goto exit; - - c->workqueue = create_singlethread_workqueue( - dev_name(master->dev.parent)); - if (!c->workqueue) - goto exit_busy; - c->last_chipselect = -1; - - dev_info(&dev->dev, "at %#llx, irq %d, %dMHz\n", - (unsigned long long)res->start, irq, - (c->baseclk + 500000) / 1000000); - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA; - - master->bus_num = dev->id; - master->setup = txx9spi_setup; - master->transfer = txx9spi_transfer; - master->num_chipselect = (u16)UINT_MAX; /* any GPIO numbers */ - - ret = spi_register_master(master); - if (ret) - goto exit; - return 0; -exit_busy: - ret = -EBUSY; -exit: - if (c->workqueue) - destroy_workqueue(c->workqueue); - if (c->clk) { - clk_disable(c->clk); - clk_put(c->clk); - } - platform_set_drvdata(dev, NULL); - spi_master_put(master); - return ret; -} - -static int __exit txx9spi_remove(struct platform_device *dev) -{ - struct spi_master *master = spi_master_get(platform_get_drvdata(dev)); - struct txx9spi *c = spi_master_get_devdata(master); - - spi_unregister_master(master); - platform_set_drvdata(dev, NULL); - destroy_workqueue(c->workqueue); - clk_disable(c->clk); - clk_put(c->clk); - spi_master_put(master); - return 0; -} - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:spi_txx9"); - -static struct platform_driver txx9spi_driver = { - .remove = __exit_p(txx9spi_remove), - .driver = { - .name = "spi_txx9", - .owner = THIS_MODULE, - }, -}; - -static int __init txx9spi_init(void) -{ - return platform_driver_probe(&txx9spi_driver, txx9spi_probe); -} -subsys_initcall(txx9spi_init); - -static void __exit txx9spi_exit(void) -{ - platform_driver_unregister(&txx9spi_driver); -} -module_exit(txx9spi_exit); - -MODULE_DESCRIPTION("TXx9 SPI Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index d9fd86211365..830adbed1d7a 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -1,5 +1,5 @@ /* - * spidev.c -- simple synchronous userspace interface to SPI devices + * Simple synchronous userspace interface to SPI devices * * Copyright (C) 2006 SWAPP * Andrea Paterniani diff --git a/drivers/spi/ti-ssp-spi.c b/drivers/spi/ti-ssp-spi.c deleted file mode 100644 index ee22795c7973..000000000000 --- a/drivers/spi/ti-ssp-spi.c +++ /dev/null @@ -1,402 +0,0 @@ -/* - * Sequencer Serial Port (SSP) based SPI master driver - * - * Copyright (C) 2010 Texas Instruments Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include - -#define MODE_BITS (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH) - -struct ti_ssp_spi { - struct spi_master *master; - struct device *dev; - spinlock_t lock; - struct list_head msg_queue; - struct completion complete; - bool shutdown; - struct workqueue_struct *workqueue; - struct work_struct work; - u8 mode, bpw; - int cs_active; - u32 pc_en, pc_dis, pc_wr, pc_rd; - void (*select)(int cs); -}; - -static u32 ti_ssp_spi_rx(struct ti_ssp_spi *hw) -{ - u32 ret; - - ti_ssp_run(hw->dev, hw->pc_rd, 0, &ret); - return ret; -} - -static void ti_ssp_spi_tx(struct ti_ssp_spi *hw, u32 data) -{ - ti_ssp_run(hw->dev, hw->pc_wr, data << (32 - hw->bpw), NULL); -} - -static int ti_ssp_spi_txrx(struct ti_ssp_spi *hw, struct spi_message *msg, - struct spi_transfer *t) -{ - int count; - - if (hw->bpw <= 8) { - u8 *rx = t->rx_buf; - const u8 *tx = t->tx_buf; - - for (count = 0; count < t->len; count += 1) { - if (t->tx_buf) - ti_ssp_spi_tx(hw, *tx++); - if (t->rx_buf) - *rx++ = ti_ssp_spi_rx(hw); - } - } else if (hw->bpw <= 16) { - u16 *rx = t->rx_buf; - const u16 *tx = t->tx_buf; - - for (count = 0; count < t->len; count += 2) { - if (t->tx_buf) - ti_ssp_spi_tx(hw, *tx++); - if (t->rx_buf) - *rx++ = ti_ssp_spi_rx(hw); - } - } else { - u32 *rx = t->rx_buf; - const u32 *tx = t->tx_buf; - - for (count = 0; count < t->len; count += 4) { - if (t->tx_buf) - ti_ssp_spi_tx(hw, *tx++); - if (t->rx_buf) - *rx++ = ti_ssp_spi_rx(hw); - } - } - - msg->actual_length += count; /* bytes transferred */ - - dev_dbg(&msg->spi->dev, "xfer %s%s, %d bytes, %d bpw, count %d%s\n", - t->tx_buf ? "tx" : "", t->rx_buf ? "rx" : "", t->len, - hw->bpw, count, (count < t->len) ? " (under)" : ""); - - return (count < t->len) ? -EIO : 0; /* left over data */ -} - -static void ti_ssp_spi_chip_select(struct ti_ssp_spi *hw, int cs_active) -{ - cs_active = !!cs_active; - if (cs_active == hw->cs_active) - return; - ti_ssp_run(hw->dev, cs_active ? hw->pc_en : hw->pc_dis, 0, NULL); - hw->cs_active = cs_active; -} - -#define __SHIFT_OUT(bits) (SSP_OPCODE_SHIFT | SSP_OUT_MODE | \ - cs_en | clk | SSP_COUNT((bits) * 2 - 1)) -#define __SHIFT_IN(bits) (SSP_OPCODE_SHIFT | SSP_IN_MODE | \ - cs_en | clk | SSP_COUNT((bits) * 2 - 1)) - -static int ti_ssp_spi_setup_transfer(struct ti_ssp_spi *hw, u8 bpw, u8 mode) -{ - int error, idx = 0; - u32 seqram[16]; - u32 cs_en, cs_dis, clk; - u32 topbits, botbits; - - mode &= MODE_BITS; - if (mode == hw->mode && bpw == hw->bpw) - return 0; - - cs_en = (mode & SPI_CS_HIGH) ? SSP_CS_HIGH : SSP_CS_LOW; - cs_dis = (mode & SPI_CS_HIGH) ? SSP_CS_LOW : SSP_CS_HIGH; - clk = (mode & SPI_CPOL) ? SSP_CLK_HIGH : SSP_CLK_LOW; - - /* Construct instructions */ - - /* Disable Chip Select */ - hw->pc_dis = idx; - seqram[idx++] = SSP_OPCODE_DIRECT | SSP_OUT_MODE | cs_dis | clk; - seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_dis | clk; - - /* Enable Chip Select */ - hw->pc_en = idx; - seqram[idx++] = SSP_OPCODE_DIRECT | SSP_OUT_MODE | cs_en | clk; - seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_en | clk; - - /* Reads and writes need to be split for bpw > 16 */ - topbits = (bpw > 16) ? 16 : bpw; - botbits = bpw - topbits; - - /* Write */ - hw->pc_wr = idx; - seqram[idx++] = __SHIFT_OUT(topbits) | SSP_ADDR_REG; - if (botbits) - seqram[idx++] = __SHIFT_OUT(botbits) | SSP_DATA_REG; - seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_en | clk; - - /* Read */ - hw->pc_rd = idx; - if (botbits) - seqram[idx++] = __SHIFT_IN(botbits) | SSP_ADDR_REG; - seqram[idx++] = __SHIFT_IN(topbits) | SSP_DATA_REG; - seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_en | clk; - - error = ti_ssp_load(hw->dev, 0, seqram, idx); - if (error < 0) - return error; - - error = ti_ssp_set_mode(hw->dev, ((mode & SPI_CPHA) ? - 0 : SSP_EARLY_DIN)); - if (error < 0) - return error; - - hw->bpw = bpw; - hw->mode = mode; - - return error; -} - -static void ti_ssp_spi_work(struct work_struct *work) -{ - struct ti_ssp_spi *hw = container_of(work, struct ti_ssp_spi, work); - - spin_lock(&hw->lock); - - while (!list_empty(&hw->msg_queue)) { - struct spi_message *m; - struct spi_device *spi; - struct spi_transfer *t = NULL; - int status = 0; - - m = container_of(hw->msg_queue.next, struct spi_message, - queue); - - list_del_init(&m->queue); - - spin_unlock(&hw->lock); - - spi = m->spi; - - if (hw->select) - hw->select(spi->chip_select); - - list_for_each_entry(t, &m->transfers, transfer_list) { - int bpw = spi->bits_per_word; - int xfer_status; - - if (t->bits_per_word) - bpw = t->bits_per_word; - - if (ti_ssp_spi_setup_transfer(hw, bpw, spi->mode) < 0) - break; - - ti_ssp_spi_chip_select(hw, 1); - - xfer_status = ti_ssp_spi_txrx(hw, m, t); - if (xfer_status < 0) - status = xfer_status; - - if (t->delay_usecs) - udelay(t->delay_usecs); - - if (t->cs_change) - ti_ssp_spi_chip_select(hw, 0); - } - - ti_ssp_spi_chip_select(hw, 0); - m->status = status; - m->complete(m->context); - - spin_lock(&hw->lock); - } - - if (hw->shutdown) - complete(&hw->complete); - - spin_unlock(&hw->lock); -} - -static int ti_ssp_spi_setup(struct spi_device *spi) -{ - if (spi->bits_per_word > 32) - return -EINVAL; - - return 0; -} - -static int ti_ssp_spi_transfer(struct spi_device *spi, struct spi_message *m) -{ - struct ti_ssp_spi *hw; - struct spi_transfer *t; - int error = 0; - - m->actual_length = 0; - m->status = -EINPROGRESS; - - hw = spi_master_get_devdata(spi->master); - - if (list_empty(&m->transfers) || !m->complete) - return -EINVAL; - - list_for_each_entry(t, &m->transfers, transfer_list) { - if (t->len && !(t->rx_buf || t->tx_buf)) { - dev_err(&spi->dev, "invalid xfer, no buffer\n"); - return -EINVAL; - } - - if (t->len && t->rx_buf && t->tx_buf) { - dev_err(&spi->dev, "invalid xfer, full duplex\n"); - return -EINVAL; - } - - if (t->bits_per_word > 32) { - dev_err(&spi->dev, "invalid xfer width %d\n", - t->bits_per_word); - return -EINVAL; - } - } - - spin_lock(&hw->lock); - if (hw->shutdown) { - error = -ESHUTDOWN; - goto error_unlock; - } - list_add_tail(&m->queue, &hw->msg_queue); - queue_work(hw->workqueue, &hw->work); -error_unlock: - spin_unlock(&hw->lock); - return error; -} - -static int __devinit ti_ssp_spi_probe(struct platform_device *pdev) -{ - const struct ti_ssp_spi_data *pdata; - struct ti_ssp_spi *hw; - struct spi_master *master; - struct device *dev = &pdev->dev; - int error = 0; - - pdata = dev->platform_data; - if (!pdata) { - dev_err(dev, "platform data not found\n"); - return -EINVAL; - } - - master = spi_alloc_master(dev, sizeof(struct ti_ssp_spi)); - if (!master) { - dev_err(dev, "cannot allocate SPI master\n"); - return -ENOMEM; - } - - hw = spi_master_get_devdata(master); - platform_set_drvdata(pdev, hw); - - hw->master = master; - hw->dev = dev; - hw->select = pdata->select; - - spin_lock_init(&hw->lock); - init_completion(&hw->complete); - INIT_LIST_HEAD(&hw->msg_queue); - INIT_WORK(&hw->work, ti_ssp_spi_work); - - hw->workqueue = create_singlethread_workqueue(dev_name(dev)); - if (!hw->workqueue) { - error = -ENOMEM; - dev_err(dev, "work queue creation failed\n"); - goto error_wq; - } - - error = ti_ssp_set_iosel(hw->dev, pdata->iosel); - if (error < 0) { - dev_err(dev, "io setup failed\n"); - goto error_iosel; - } - - master->bus_num = pdev->id; - master->num_chipselect = pdata->num_cs; - master->mode_bits = MODE_BITS; - master->flags = SPI_MASTER_HALF_DUPLEX; - master->setup = ti_ssp_spi_setup; - master->transfer = ti_ssp_spi_transfer; - - error = spi_register_master(master); - if (error) { - dev_err(dev, "master registration failed\n"); - goto error_reg; - } - - return 0; - -error_reg: -error_iosel: - destroy_workqueue(hw->workqueue); -error_wq: - spi_master_put(master); - return error; -} - -static int __devexit ti_ssp_spi_remove(struct platform_device *pdev) -{ - struct ti_ssp_spi *hw = platform_get_drvdata(pdev); - int error; - - hw->shutdown = 1; - while (!list_empty(&hw->msg_queue)) { - error = wait_for_completion_interruptible(&hw->complete); - if (error < 0) { - hw->shutdown = 0; - return error; - } - } - destroy_workqueue(hw->workqueue); - spi_unregister_master(hw->master); - - return 0; -} - -static struct platform_driver ti_ssp_spi_driver = { - .probe = ti_ssp_spi_probe, - .remove = __devexit_p(ti_ssp_spi_remove), - .driver = { - .name = "ti-ssp-spi", - .owner = THIS_MODULE, - }, -}; - -static int __init ti_ssp_spi_init(void) -{ - return platform_driver_register(&ti_ssp_spi_driver); -} -module_init(ti_ssp_spi_init); - -static void __exit ti_ssp_spi_exit(void) -{ - platform_driver_unregister(&ti_ssp_spi_driver); -} -module_exit(ti_ssp_spi_exit); - -MODULE_DESCRIPTION("SSP SPI Master"); -MODULE_AUTHOR("Cyril Chemparathy"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:ti-ssp-spi"); diff --git a/drivers/spi/tle62x0.c b/drivers/spi/tle62x0.c deleted file mode 100644 index 32a40876532f..000000000000 --- a/drivers/spi/tle62x0.c +++ /dev/null @@ -1,334 +0,0 @@ -/* - * tle62x0.c -- support Infineon TLE62x0 driver chips - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks, - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include - - -#define CMD_READ 0x00 -#define CMD_SET 0xff - -#define DIAG_NORMAL 0x03 -#define DIAG_OVERLOAD 0x02 -#define DIAG_OPEN 0x01 -#define DIAG_SHORTGND 0x00 - -struct tle62x0_state { - struct spi_device *us; - struct mutex lock; - unsigned int nr_gpio; - unsigned int gpio_state; - - unsigned char tx_buff[4]; - unsigned char rx_buff[4]; -}; - -static int to_gpio_num(struct device_attribute *attr); - -static inline int tle62x0_write(struct tle62x0_state *st) -{ - unsigned char *buff = st->tx_buff; - unsigned int gpio_state = st->gpio_state; - - buff[0] = CMD_SET; - - if (st->nr_gpio == 16) { - buff[1] = gpio_state >> 8; - buff[2] = gpio_state; - } else { - buff[1] = gpio_state; - } - - dev_dbg(&st->us->dev, "buff %02x,%02x,%02x\n", - buff[0], buff[1], buff[2]); - - return spi_write(st->us, buff, (st->nr_gpio == 16) ? 3 : 2); -} - -static inline int tle62x0_read(struct tle62x0_state *st) -{ - unsigned char *txbuff = st->tx_buff; - struct spi_transfer xfer = { - .tx_buf = txbuff, - .rx_buf = st->rx_buff, - .len = (st->nr_gpio * 2) / 8, - }; - struct spi_message msg; - - txbuff[0] = CMD_READ; - txbuff[1] = 0x00; - txbuff[2] = 0x00; - txbuff[3] = 0x00; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - - return spi_sync(st->us, &msg); -} - -static unsigned char *decode_fault(unsigned int fault_code) -{ - fault_code &= 3; - - switch (fault_code) { - case DIAG_NORMAL: - return "N"; - case DIAG_OVERLOAD: - return "V"; - case DIAG_OPEN: - return "O"; - case DIAG_SHORTGND: - return "G"; - } - - return "?"; -} - -static ssize_t tle62x0_status_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct tle62x0_state *st = dev_get_drvdata(dev); - char *bp = buf; - unsigned char *buff = st->rx_buff; - unsigned long fault = 0; - int ptr; - int ret; - - mutex_lock(&st->lock); - ret = tle62x0_read(st); - dev_dbg(dev, "tle62x0_read() returned %d\n", ret); - if (ret < 0) { - mutex_unlock(&st->lock); - return ret; - } - - for (ptr = 0; ptr < (st->nr_gpio * 2)/8; ptr += 1) { - fault <<= 8; - fault |= ((unsigned long)buff[ptr]); - - dev_dbg(dev, "byte %d is %02x\n", ptr, buff[ptr]); - } - - for (ptr = 0; ptr < st->nr_gpio; ptr++) { - bp += sprintf(bp, "%s ", decode_fault(fault >> (ptr * 2))); - } - - *bp++ = '\n'; - - mutex_unlock(&st->lock); - return bp - buf; -} - -static DEVICE_ATTR(status_show, S_IRUGO, tle62x0_status_show, NULL); - -static ssize_t tle62x0_gpio_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct tle62x0_state *st = dev_get_drvdata(dev); - int gpio_num = to_gpio_num(attr); - int value; - - mutex_lock(&st->lock); - value = (st->gpio_state >> gpio_num) & 1; - mutex_unlock(&st->lock); - - return snprintf(buf, PAGE_SIZE, "%d", value); -} - -static ssize_t tle62x0_gpio_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct tle62x0_state *st = dev_get_drvdata(dev); - int gpio_num = to_gpio_num(attr); - unsigned long val; - char *endp; - - val = simple_strtoul(buf, &endp, 0); - if (buf == endp) - return -EINVAL; - - dev_dbg(dev, "setting gpio %d to %ld\n", gpio_num, val); - - mutex_lock(&st->lock); - - if (val) - st->gpio_state |= 1 << gpio_num; - else - st->gpio_state &= ~(1 << gpio_num); - - tle62x0_write(st); - mutex_unlock(&st->lock); - - return len; -} - -static DEVICE_ATTR(gpio1, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio2, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio3, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio4, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio5, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio6, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio7, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio8, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio9, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio10, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio11, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio12, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio13, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio14, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio15, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); -static DEVICE_ATTR(gpio16, S_IWUSR|S_IRUGO, - tle62x0_gpio_show, tle62x0_gpio_store); - -static struct device_attribute *gpio_attrs[] = { - [0] = &dev_attr_gpio1, - [1] = &dev_attr_gpio2, - [2] = &dev_attr_gpio3, - [3] = &dev_attr_gpio4, - [4] = &dev_attr_gpio5, - [5] = &dev_attr_gpio6, - [6] = &dev_attr_gpio7, - [7] = &dev_attr_gpio8, - [8] = &dev_attr_gpio9, - [9] = &dev_attr_gpio10, - [10] = &dev_attr_gpio11, - [11] = &dev_attr_gpio12, - [12] = &dev_attr_gpio13, - [13] = &dev_attr_gpio14, - [14] = &dev_attr_gpio15, - [15] = &dev_attr_gpio16 -}; - -static int to_gpio_num(struct device_attribute *attr) -{ - int ptr; - - for (ptr = 0; ptr < ARRAY_SIZE(gpio_attrs); ptr++) { - if (gpio_attrs[ptr] == attr) - return ptr; - } - - return -1; -} - -static int __devinit tle62x0_probe(struct spi_device *spi) -{ - struct tle62x0_state *st; - struct tle62x0_pdata *pdata; - int ptr; - int ret; - - pdata = spi->dev.platform_data; - if (pdata == NULL) { - dev_err(&spi->dev, "no device data specified\n"); - return -EINVAL; - } - - st = kzalloc(sizeof(struct tle62x0_state), GFP_KERNEL); - if (st == NULL) { - dev_err(&spi->dev, "no memory for device state\n"); - return -ENOMEM; - } - - st->us = spi; - st->nr_gpio = pdata->gpio_count; - st->gpio_state = pdata->init_state; - - mutex_init(&st->lock); - - ret = device_create_file(&spi->dev, &dev_attr_status_show); - if (ret) { - dev_err(&spi->dev, "cannot create status attribute\n"); - goto err_status; - } - - for (ptr = 0; ptr < pdata->gpio_count; ptr++) { - ret = device_create_file(&spi->dev, gpio_attrs[ptr]); - if (ret) { - dev_err(&spi->dev, "cannot create gpio attribute\n"); - goto err_gpios; - } - } - - /* tle62x0_write(st); */ - spi_set_drvdata(spi, st); - return 0; - - err_gpios: - while (--ptr >= 0) - device_remove_file(&spi->dev, gpio_attrs[ptr]); - - device_remove_file(&spi->dev, &dev_attr_status_show); - - err_status: - kfree(st); - return ret; -} - -static int __devexit tle62x0_remove(struct spi_device *spi) -{ - struct tle62x0_state *st = spi_get_drvdata(spi); - int ptr; - - for (ptr = 0; ptr < st->nr_gpio; ptr++) - device_remove_file(&spi->dev, gpio_attrs[ptr]); - - device_remove_file(&spi->dev, &dev_attr_status_show); - kfree(st); - return 0; -} - -static struct spi_driver tle62x0_driver = { - .driver = { - .name = "tle62x0", - .owner = THIS_MODULE, - }, - .probe = tle62x0_probe, - .remove = __devexit_p(tle62x0_remove), -}; - -static __init int tle62x0_init(void) -{ - return spi_register_driver(&tle62x0_driver); -} - -static __exit void tle62x0_exit(void) -{ - spi_unregister_driver(&tle62x0_driver); -} - -module_init(tle62x0_init); -module_exit(tle62x0_exit); - -MODULE_AUTHOR("Ben Dooks "); -MODULE_DESCRIPTION("TLE62x0 SPI driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("spi:tle62x0"); diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c deleted file mode 100644 index 4d2c75df886c..000000000000 --- a/drivers/spi/xilinx_spi.c +++ /dev/null @@ -1,556 +0,0 @@ -/* - * Xilinx SPI controller driver (master mode only) - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright (c) 2010 Secret Lab Technologies, Ltd. - * Copyright (c) 2009 Intel Corporation - * 2002-2007 (c) MontaVista Software, Inc. - - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define XILINX_SPI_NAME "xilinx_spi" - -/* Register definitions as per "OPB Serial Peripheral Interface (SPI) (v1.00e) - * Product Specification", DS464 - */ -#define XSPI_CR_OFFSET 0x60 /* Control Register */ - -#define XSPI_CR_ENABLE 0x02 -#define XSPI_CR_MASTER_MODE 0x04 -#define XSPI_CR_CPOL 0x08 -#define XSPI_CR_CPHA 0x10 -#define XSPI_CR_MODE_MASK (XSPI_CR_CPHA | XSPI_CR_CPOL) -#define XSPI_CR_TXFIFO_RESET 0x20 -#define XSPI_CR_RXFIFO_RESET 0x40 -#define XSPI_CR_MANUAL_SSELECT 0x80 -#define XSPI_CR_TRANS_INHIBIT 0x100 -#define XSPI_CR_LSB_FIRST 0x200 - -#define XSPI_SR_OFFSET 0x64 /* Status Register */ - -#define XSPI_SR_RX_EMPTY_MASK 0x01 /* Receive FIFO is empty */ -#define XSPI_SR_RX_FULL_MASK 0x02 /* Receive FIFO is full */ -#define XSPI_SR_TX_EMPTY_MASK 0x04 /* Transmit FIFO is empty */ -#define XSPI_SR_TX_FULL_MASK 0x08 /* Transmit FIFO is full */ -#define XSPI_SR_MODE_FAULT_MASK 0x10 /* Mode fault error */ - -#define XSPI_TXD_OFFSET 0x68 /* Data Transmit Register */ -#define XSPI_RXD_OFFSET 0x6c /* Data Receive Register */ - -#define XSPI_SSR_OFFSET 0x70 /* 32-bit Slave Select Register */ - -/* Register definitions as per "OPB IPIF (v3.01c) Product Specification", DS414 - * IPIF registers are 32 bit - */ -#define XIPIF_V123B_DGIER_OFFSET 0x1c /* IPIF global int enable reg */ -#define XIPIF_V123B_GINTR_ENABLE 0x80000000 - -#define XIPIF_V123B_IISR_OFFSET 0x20 /* IPIF interrupt status reg */ -#define XIPIF_V123B_IIER_OFFSET 0x28 /* IPIF interrupt enable reg */ - -#define XSPI_INTR_MODE_FAULT 0x01 /* Mode fault error */ -#define XSPI_INTR_SLAVE_MODE_FAULT 0x02 /* Selected as slave while - * disabled */ -#define XSPI_INTR_TX_EMPTY 0x04 /* TxFIFO is empty */ -#define XSPI_INTR_TX_UNDERRUN 0x08 /* TxFIFO was underrun */ -#define XSPI_INTR_RX_FULL 0x10 /* RxFIFO is full */ -#define XSPI_INTR_RX_OVERRUN 0x20 /* RxFIFO was overrun */ -#define XSPI_INTR_TX_HALF_EMPTY 0x40 /* TxFIFO is half empty */ - -#define XIPIF_V123B_RESETR_OFFSET 0x40 /* IPIF reset register */ -#define XIPIF_V123B_RESET_MASK 0x0a /* the value to write */ - -struct xilinx_spi { - /* bitbang has to be first */ - struct spi_bitbang bitbang; - struct completion done; - struct resource mem; /* phys mem */ - void __iomem *regs; /* virt. address of the control registers */ - - u32 irq; - - u8 *rx_ptr; /* pointer in the Tx buffer */ - const u8 *tx_ptr; /* pointer in the Rx buffer */ - int remaining_bytes; /* the number of bytes left to transfer */ - u8 bits_per_word; - unsigned int (*read_fn) (void __iomem *); - void (*write_fn) (u32, void __iomem *); - void (*tx_fn) (struct xilinx_spi *); - void (*rx_fn) (struct xilinx_spi *); -}; - -static void xspi_write32(u32 val, void __iomem *addr) -{ - iowrite32(val, addr); -} - -static unsigned int xspi_read32(void __iomem *addr) -{ - return ioread32(addr); -} - -static void xspi_write32_be(u32 val, void __iomem *addr) -{ - iowrite32be(val, addr); -} - -static unsigned int xspi_read32_be(void __iomem *addr) -{ - return ioread32be(addr); -} - -static void xspi_tx8(struct xilinx_spi *xspi) -{ - xspi->write_fn(*xspi->tx_ptr, xspi->regs + XSPI_TXD_OFFSET); - xspi->tx_ptr++; -} - -static void xspi_tx16(struct xilinx_spi *xspi) -{ - xspi->write_fn(*(u16 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET); - xspi->tx_ptr += 2; -} - -static void xspi_tx32(struct xilinx_spi *xspi) -{ - xspi->write_fn(*(u32 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET); - xspi->tx_ptr += 4; -} - -static void xspi_rx8(struct xilinx_spi *xspi) -{ - u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET); - if (xspi->rx_ptr) { - *xspi->rx_ptr = data & 0xff; - xspi->rx_ptr++; - } -} - -static void xspi_rx16(struct xilinx_spi *xspi) -{ - u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET); - if (xspi->rx_ptr) { - *(u16 *)(xspi->rx_ptr) = data & 0xffff; - xspi->rx_ptr += 2; - } -} - -static void xspi_rx32(struct xilinx_spi *xspi) -{ - u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET); - if (xspi->rx_ptr) { - *(u32 *)(xspi->rx_ptr) = data; - xspi->rx_ptr += 4; - } -} - -static void xspi_init_hw(struct xilinx_spi *xspi) -{ - void __iomem *regs_base = xspi->regs; - - /* Reset the SPI device */ - xspi->write_fn(XIPIF_V123B_RESET_MASK, - regs_base + XIPIF_V123B_RESETR_OFFSET); - /* Disable all the interrupts just in case */ - xspi->write_fn(0, regs_base + XIPIF_V123B_IIER_OFFSET); - /* Enable the global IPIF interrupt */ - xspi->write_fn(XIPIF_V123B_GINTR_ENABLE, - regs_base + XIPIF_V123B_DGIER_OFFSET); - /* Deselect the slave on the SPI bus */ - xspi->write_fn(0xffff, regs_base + XSPI_SSR_OFFSET); - /* Disable the transmitter, enable Manual Slave Select Assertion, - * put SPI controller into master mode, and enable it */ - xspi->write_fn(XSPI_CR_TRANS_INHIBIT | XSPI_CR_MANUAL_SSELECT | - XSPI_CR_MASTER_MODE | XSPI_CR_ENABLE | XSPI_CR_TXFIFO_RESET | - XSPI_CR_RXFIFO_RESET, regs_base + XSPI_CR_OFFSET); -} - -static void xilinx_spi_chipselect(struct spi_device *spi, int is_on) -{ - struct xilinx_spi *xspi = spi_master_get_devdata(spi->master); - - if (is_on == BITBANG_CS_INACTIVE) { - /* Deselect the slave on the SPI bus */ - xspi->write_fn(0xffff, xspi->regs + XSPI_SSR_OFFSET); - } else if (is_on == BITBANG_CS_ACTIVE) { - /* Set the SPI clock phase and polarity */ - u16 cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) - & ~XSPI_CR_MODE_MASK; - if (spi->mode & SPI_CPHA) - cr |= XSPI_CR_CPHA; - if (spi->mode & SPI_CPOL) - cr |= XSPI_CR_CPOL; - xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); - - /* We do not check spi->max_speed_hz here as the SPI clock - * frequency is not software programmable (the IP block design - * parameter) - */ - - /* Activate the chip select */ - xspi->write_fn(~(0x0001 << spi->chip_select), - xspi->regs + XSPI_SSR_OFFSET); - } -} - -/* spi_bitbang requires custom setup_transfer() to be defined if there is a - * custom txrx_bufs(). We have nothing to setup here as the SPI IP block - * supports 8 or 16 bits per word which cannot be changed in software. - * SPI clock can't be changed in software either. - * Check for correct bits per word. Chip select delay calculations could be - * added here as soon as bitbang_work() can be made aware of the delay value. - */ -static int xilinx_spi_setup_transfer(struct spi_device *spi, - struct spi_transfer *t) -{ - struct xilinx_spi *xspi = spi_master_get_devdata(spi->master); - u8 bits_per_word; - - bits_per_word = (t && t->bits_per_word) - ? t->bits_per_word : spi->bits_per_word; - if (bits_per_word != xspi->bits_per_word) { - dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", - __func__, bits_per_word); - return -EINVAL; - } - - return 0; -} - -static int xilinx_spi_setup(struct spi_device *spi) -{ - /* always return 0, we can not check the number of bits. - * There are cases when SPI setup is called before any driver is - * there, in that case the SPI core defaults to 8 bits, which we - * do not support in some cases. But if we return an error, the - * SPI device would not be registered and no driver can get hold of it - * When the driver is there, it will call SPI setup again with the - * correct number of bits per transfer. - * If a driver setups with the wrong bit number, it will fail when - * it tries to do a transfer - */ - return 0; -} - -static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi) -{ - u8 sr; - - /* Fill the Tx FIFO with as many bytes as possible */ - sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); - while ((sr & XSPI_SR_TX_FULL_MASK) == 0 && xspi->remaining_bytes > 0) { - if (xspi->tx_ptr) - xspi->tx_fn(xspi); - else - xspi->write_fn(0, xspi->regs + XSPI_TXD_OFFSET); - xspi->remaining_bytes -= xspi->bits_per_word / 8; - sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); - } -} - -static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) -{ - struct xilinx_spi *xspi = spi_master_get_devdata(spi->master); - u32 ipif_ier; - u16 cr; - - /* We get here with transmitter inhibited */ - - xspi->tx_ptr = t->tx_buf; - xspi->rx_ptr = t->rx_buf; - xspi->remaining_bytes = t->len; - INIT_COMPLETION(xspi->done); - - xilinx_spi_fill_tx_fifo(xspi); - - /* Enable the transmit empty interrupt, which we use to determine - * progress on the transmission. - */ - ipif_ier = xspi->read_fn(xspi->regs + XIPIF_V123B_IIER_OFFSET); - xspi->write_fn(ipif_ier | XSPI_INTR_TX_EMPTY, - xspi->regs + XIPIF_V123B_IIER_OFFSET); - - /* Start the transfer by not inhibiting the transmitter any longer */ - cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) & - ~XSPI_CR_TRANS_INHIBIT; - xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); - - wait_for_completion(&xspi->done); - - /* Disable the transmit empty interrupt */ - xspi->write_fn(ipif_ier, xspi->regs + XIPIF_V123B_IIER_OFFSET); - - return t->len - xspi->remaining_bytes; -} - - -/* This driver supports single master mode only. Hence Tx FIFO Empty - * is the only interrupt we care about. - * Receive FIFO Overrun, Transmit FIFO Underrun, Mode Fault, and Slave Mode - * Fault are not to happen. - */ -static irqreturn_t xilinx_spi_irq(int irq, void *dev_id) -{ - struct xilinx_spi *xspi = dev_id; - u32 ipif_isr; - - /* Get the IPIF interrupts, and clear them immediately */ - ipif_isr = xspi->read_fn(xspi->regs + XIPIF_V123B_IISR_OFFSET); - xspi->write_fn(ipif_isr, xspi->regs + XIPIF_V123B_IISR_OFFSET); - - if (ipif_isr & XSPI_INTR_TX_EMPTY) { /* Transmission completed */ - u16 cr; - u8 sr; - - /* A transmit has just completed. Process received data and - * check for more data to transmit. Always inhibit the - * transmitter while the Isr refills the transmit register/FIFO, - * or make sure it is stopped if we're done. - */ - cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET); - xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT, - xspi->regs + XSPI_CR_OFFSET); - - /* Read out all the data from the Rx FIFO */ - sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); - while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) { - xspi->rx_fn(xspi); - sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); - } - - /* See if there is more data to send */ - if (xspi->remaining_bytes > 0) { - xilinx_spi_fill_tx_fifo(xspi); - /* Start the transfer by not inhibiting the - * transmitter any longer - */ - xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); - } else { - /* No more data to send. - * Indicate the transfer is completed. - */ - complete(&xspi->done); - } - } - - return IRQ_HANDLED; -} - -static const struct of_device_id xilinx_spi_of_match[] = { - { .compatible = "xlnx,xps-spi-2.00.a", }, - { .compatible = "xlnx,xps-spi-2.00.b", }, - {} -}; -MODULE_DEVICE_TABLE(of, xilinx_spi_of_match); - -struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, - u32 irq, s16 bus_num, int num_cs, int little_endian, int bits_per_word) -{ - struct spi_master *master; - struct xilinx_spi *xspi; - int ret; - - master = spi_alloc_master(dev, sizeof(struct xilinx_spi)); - if (!master) - return NULL; - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA; - - xspi = spi_master_get_devdata(master); - xspi->bitbang.master = spi_master_get(master); - xspi->bitbang.chipselect = xilinx_spi_chipselect; - xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer; - xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs; - xspi->bitbang.master->setup = xilinx_spi_setup; - init_completion(&xspi->done); - - if (!request_mem_region(mem->start, resource_size(mem), - XILINX_SPI_NAME)) - goto put_master; - - xspi->regs = ioremap(mem->start, resource_size(mem)); - if (xspi->regs == NULL) { - dev_warn(dev, "ioremap failure\n"); - goto map_failed; - } - - master->bus_num = bus_num; - master->num_chipselect = num_cs; - master->dev.of_node = dev->of_node; - - xspi->mem = *mem; - xspi->irq = irq; - if (little_endian) { - xspi->read_fn = xspi_read32; - xspi->write_fn = xspi_write32; - } else { - xspi->read_fn = xspi_read32_be; - xspi->write_fn = xspi_write32_be; - } - xspi->bits_per_word = bits_per_word; - if (xspi->bits_per_word == 8) { - xspi->tx_fn = xspi_tx8; - xspi->rx_fn = xspi_rx8; - } else if (xspi->bits_per_word == 16) { - xspi->tx_fn = xspi_tx16; - xspi->rx_fn = xspi_rx16; - } else if (xspi->bits_per_word == 32) { - xspi->tx_fn = xspi_tx32; - xspi->rx_fn = xspi_rx32; - } else - goto unmap_io; - - - /* SPI controller initializations */ - xspi_init_hw(xspi); - - /* Register for SPI Interrupt */ - ret = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi); - if (ret) - goto unmap_io; - - ret = spi_bitbang_start(&xspi->bitbang); - if (ret) { - dev_err(dev, "spi_bitbang_start FAILED\n"); - goto free_irq; - } - - dev_info(dev, "at 0x%08llX mapped to 0x%p, irq=%d\n", - (unsigned long long)mem->start, xspi->regs, xspi->irq); - return master; - -free_irq: - free_irq(xspi->irq, xspi); -unmap_io: - iounmap(xspi->regs); -map_failed: - release_mem_region(mem->start, resource_size(mem)); -put_master: - spi_master_put(master); - return NULL; -} -EXPORT_SYMBOL(xilinx_spi_init); - -void xilinx_spi_deinit(struct spi_master *master) -{ - struct xilinx_spi *xspi; - - xspi = spi_master_get_devdata(master); - - spi_bitbang_stop(&xspi->bitbang); - free_irq(xspi->irq, xspi); - iounmap(xspi->regs); - - release_mem_region(xspi->mem.start, resource_size(&xspi->mem)); - spi_master_put(xspi->bitbang.master); -} -EXPORT_SYMBOL(xilinx_spi_deinit); - -static int __devinit xilinx_spi_probe(struct platform_device *dev) -{ - struct xspi_platform_data *pdata; - struct resource *r; - int irq, num_cs = 0, little_endian = 0, bits_per_word = 8; - struct spi_master *master; - u8 i; - - pdata = dev->dev.platform_data; - if (pdata) { - num_cs = pdata->num_chipselect; - little_endian = pdata->little_endian; - bits_per_word = pdata->bits_per_word; - } - -#ifdef CONFIG_OF - if (dev->dev.of_node) { - const __be32 *prop; - int len; - - /* number of slave select bits is required */ - prop = of_get_property(dev->dev.of_node, "xlnx,num-ss-bits", - &len); - if (prop && len >= sizeof(*prop)) - num_cs = __be32_to_cpup(prop); - } -#endif - - if (!num_cs) { - dev_err(&dev->dev, "Missing slave select configuration data\n"); - return -EINVAL; - } - - - r = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!r) - return -ENODEV; - - irq = platform_get_irq(dev, 0); - if (irq < 0) - return -ENXIO; - - master = xilinx_spi_init(&dev->dev, r, irq, dev->id, num_cs, - little_endian, bits_per_word); - if (!master) - return -ENODEV; - - if (pdata) { - for (i = 0; i < pdata->num_devices; i++) - spi_new_device(master, pdata->devices + i); - } - - platform_set_drvdata(dev, master); - return 0; -} - -static int __devexit xilinx_spi_remove(struct platform_device *dev) -{ - xilinx_spi_deinit(platform_get_drvdata(dev)); - platform_set_drvdata(dev, 0); - - return 0; -} - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:" XILINX_SPI_NAME); - -static struct platform_driver xilinx_spi_driver = { - .probe = xilinx_spi_probe, - .remove = __devexit_p(xilinx_spi_remove), - .driver = { - .name = XILINX_SPI_NAME, - .owner = THIS_MODULE, - .of_match_table = xilinx_spi_of_match, - }, -}; - -static int __init xilinx_spi_pltfm_init(void) -{ - return platform_driver_register(&xilinx_spi_driver); -} -module_init(xilinx_spi_pltfm_init); - -static void __exit xilinx_spi_pltfm_exit(void) -{ - platform_driver_unregister(&xilinx_spi_driver); -} -module_exit(xilinx_spi_pltfm_exit); - -MODULE_AUTHOR("MontaVista Software, Inc. "); -MODULE_DESCRIPTION("Xilinx SPI driver"); -MODULE_LICENSE("GPL"); -- cgit v1.2.3