From 86b2bbfdbd1fcc4a3aa62ccd3f245c40c5ad5b85 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 20 Jan 2012 10:09:23 -0500 Subject: hwmon: (f71805f) Fix clamping of temperature limits Properly clamp temperature limits set by the user. Without this fix, attempts to write temperature limits above the maximum supported by the chip (255 degrees Celsius) would arbitrarily and unexpectedly result in the limit being set to 0 degree Celsius. Signed-off-by: Jean Delvare Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/f71805f.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c index 92f949767ece..6dbfd3e516e4 100644 --- a/drivers/hwmon/f71805f.c +++ b/drivers/hwmon/f71805f.c @@ -283,11 +283,11 @@ static inline long temp_from_reg(u8 reg) static inline u8 temp_to_reg(long val) { - if (val < 0) - val = 0; - else if (val > 1000 * 0xff) - val = 0xff; - return ((val + 500) / 1000); + if (val <= 0) + return 0; + if (val >= 1000 * 0xff) + return 0xff; + return (val + 500) / 1000; } /* -- cgit v1.2.3 From 6edf3c30af01854c416f8654d3d5d2652470afd4 Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Thu, 26 Jan 2012 15:59:00 -0500 Subject: hwmon: (sht15) fix bad error code When no platform data was supplied, returned error code was 0. Signed-off-by: Vivien Didelot Cc: stable@vger.kernel.org # 2.6.32+ Signed-off-by: Guenter Roeck --- drivers/hwmon/sht15.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index 6ddeae049058..91fdd1fe18b0 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -883,7 +883,7 @@ static int sht15_invalidate_voltage(struct notifier_block *nb, static int __devinit sht15_probe(struct platform_device *pdev) { - int ret = 0; + int ret; struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL); u8 status = 0; @@ -901,6 +901,7 @@ static int __devinit sht15_probe(struct platform_device *pdev) init_waitqueue_head(&data->wait_queue); if (pdev->dev.platform_data == NULL) { + ret = -EINVAL; dev_err(&pdev->dev, "no platform data supplied\n"); goto err_free_data; } -- cgit v1.2.3 From ad77c3e1808f07fa70f707b1c92a683b7c7d3f85 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 27 Jan 2012 17:56:06 -0800 Subject: hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776F NCT6776F only supports pwm mode for pwm2 and pwm3. Return error if an attempt is made to set those pwm channels to DC mode. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck --- drivers/hwmon/w83627ehf.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 0e0af0445222..2dfae7d7cc5b 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -1319,6 +1319,7 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr, { struct w83627ehf_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct w83627ehf_sio_data *sio_data = dev->platform_data; int nr = sensor_attr->index; unsigned long val; int err; @@ -1330,6 +1331,11 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr, if (val > 1) return -EINVAL; + + /* On NCT67766F, DC mode is only supported for pwm1 */ + if (sio_data->kind == nct6776 && nr && val != 1) + return -EINVAL; + mutex_lock(&data->update_lock); reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]); data->pwm_mode[nr] = val; -- cgit v1.2.3