From c01fac1c77a00227f706a1654317023e3f4ac7f0 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 23 Jul 2014 15:40:54 +0200 Subject: ath9k: fix aggregation session lockup If an aggregation session fails, frames still end up in the driver queue with IEEE80211_TX_CTL_AMPDU set. This causes tx for the affected station/tid to stall, since ath_tx_get_tid_subframe returning packets to send. Fix this by clearing IEEE80211_TX_CTL_AMPDU as long as no aggregation session is running. Cc: stable@vger.kernel.org Reported-by: Antonio Quartulli Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 66acb2cbd9df..7c28cb55610b 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -887,6 +887,15 @@ ath_tx_get_tid_subframe(struct ath_softc *sc, struct ath_txq *txq, tx_info = IEEE80211_SKB_CB(skb); tx_info->flags &= ~IEEE80211_TX_CTL_CLEAR_PS_FILT; + + /* + * No aggregation session is running, but there may be frames + * from a previous session or a failed attempt in the queue. + * Send them out as normal data frames + */ + if (!tid->active) + tx_info->flags &= ~IEEE80211_TX_CTL_AMPDU; + if (!(tx_info->flags & IEEE80211_TX_CTL_AMPDU)) { bf->bf_state.bf_type = 0; return bf; -- cgit v1.2.3