From baa0280f08c71a3ce699a5213f16f45f6e0e592b Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Wed, 20 Feb 2019 11:58:39 +0100 Subject: libertas_tf: don't defer firmware loading until start() In order to be able to get a MAC address before we register the device with ieee80211 we'll need to load the firmware way earlier. There seems to be one problem with this: the device seems to start with radio enabled and starts sending in frames right after the firmware load finishes. Disable the radio as soon as possible. Signed-off-by: Lubomir Rintel Reviewed-by: Steve deRosier Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/libertas_tf/if_usb.c | 24 ++++++------- .../net/wireless/marvell/libertas_tf/libertas_tf.h | 5 ++- drivers/net/wireless/marvell/libertas_tf/main.c | 41 +++++++++++++--------- 3 files changed, 38 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/marvell/libertas_tf/if_usb.c b/drivers/net/wireless/marvell/libertas_tf/if_usb.c index 7a5a1a85dcf7..a4b9ede70705 100644 --- a/drivers/net/wireless/marvell/libertas_tf/if_usb.c +++ b/drivers/net/wireless/marvell/libertas_tf/if_usb.c @@ -42,14 +42,14 @@ MODULE_DEVICE_TABLE(usb, if_usb_table); static void if_usb_receive(struct urb *urb); static void if_usb_receive_fwload(struct urb *urb); -static int if_usb_prog_firmware(struct if_usb_card *cardp); +static int if_usb_prog_firmware(struct lbtf_private *priv); static int if_usb_host_to_card(struct lbtf_private *priv, uint8_t type, uint8_t *payload, uint16_t nb); static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, uint16_t nb, u8 data); static void if_usb_free(struct if_usb_card *cardp); static int if_usb_submit_rx_urb(struct if_usb_card *cardp); -static int if_usb_reset_device(struct if_usb_card *cardp); +static int if_usb_reset_device(struct lbtf_private *priv); /** * if_usb_wrike_bulk_callback - call back to handle URB status @@ -222,13 +222,11 @@ static int if_usb_probe(struct usb_interface *intf, goto dealloc; } + cardp->boot2_version = udev->descriptor.bcdDevice; priv = lbtf_add_card(cardp, &udev->dev, &if_usb_ops); if (!priv) goto dealloc; - cardp->priv = priv; - cardp->boot2_version = udev->descriptor.bcdDevice; - usb_get_dev(udev); usb_set_intfdata(intf, cardp); @@ -253,7 +251,7 @@ static void if_usb_disconnect(struct usb_interface *intf) lbtf_deb_enter(LBTF_DEB_MAIN); - if_usb_reset_device(cardp); + if_usb_reset_device(priv); if (priv) lbtf_remove_card(priv); @@ -336,8 +334,9 @@ static int if_usb_send_fw_pkt(struct if_usb_card *cardp) return 0; } -static int if_usb_reset_device(struct if_usb_card *cardp) +static int if_usb_reset_device(struct lbtf_private *priv) { + struct if_usb_card *cardp = priv->card; struct cmd_ds_802_11_reset *cmd = cardp->ep_out_buf + 4; int ret; @@ -808,14 +807,17 @@ static int check_fwfile_format(const u8 *data, u32 totlen) } -static int if_usb_prog_firmware(struct if_usb_card *cardp) +static int if_usb_prog_firmware(struct lbtf_private *priv) { + struct if_usb_card *cardp = priv->card; int i = 0; static int reset_count = 10; int ret = 0; lbtf_deb_enter(LBTF_DEB_USB); + cardp->priv = priv; + kernel_param_lock(THIS_MODULE); ret = request_firmware(&cardp->fw, lbtf_fw_name, &cardp->udev->dev); if (ret < 0) { @@ -851,7 +853,7 @@ restart: if (cardp->bootcmdresp <= 0) { if (--reset_count >= 0) { - if_usb_reset_device(cardp); + if_usb_reset_device(priv); goto restart; } return -1; @@ -880,7 +882,7 @@ restart: if (!cardp->fwdnldover) { pr_info("failed to load fw, resetting device!\n"); if (--reset_count >= 0) { - if_usb_reset_device(cardp); + if_usb_reset_device(priv); goto restart; } @@ -889,8 +891,6 @@ restart: goto release_fw; } - cardp->priv->fw_ready = 1; - release_fw: release_firmware(cardp->fw); cardp->fw = NULL; diff --git a/drivers/net/wireless/marvell/libertas_tf/libertas_tf.h b/drivers/net/wireless/marvell/libertas_tf/libertas_tf.h index 11d5ff68bc5e..3ed1fbe28798 100644 --- a/drivers/net/wireless/marvell/libertas_tf/libertas_tf.h +++ b/drivers/net/wireless/marvell/libertas_tf/libertas_tf.h @@ -177,8 +177,8 @@ struct lbtf_ops { /** Hardware access */ int (*hw_host_to_card)(struct lbtf_private *priv, u8 type, u8 *payload, u16 nb); - int (*hw_prog_firmware)(struct if_usb_card *cardp); - int (*hw_reset_device)(struct if_usb_card *cardp); + int (*hw_prog_firmware)(struct lbtf_private *priv); + int (*hw_reset_device)(struct lbtf_private *priv); }; /** Private structure for the MV device */ @@ -254,7 +254,6 @@ struct lbtf_private { struct ieee80211_supported_band band; struct lbtf_offset_value offsetvalue; - u8 fw_ready; u8 surpriseremoved; struct sk_buff_head bc_ps_buf; diff --git a/drivers/net/wireless/marvell/libertas_tf/main.c b/drivers/net/wireless/marvell/libertas_tf/main.c index a9c04ca75ccc..d8bf0a4071da 100644 --- a/drivers/net/wireless/marvell/libertas_tf/main.c +++ b/drivers/net/wireless/marvell/libertas_tf/main.c @@ -118,11 +118,6 @@ static void lbtf_cmd_work(struct work_struct *work) priv->cmd_timed_out = 0; spin_unlock_irq(&priv->driver_lock); - if (!priv->fw_ready) { - lbtf_deb_leave_args(LBTF_DEB_CMD, "fw not ready"); - return; - } - /* Execute the next command */ if (!priv->cur_cmd) lbtf_execute_next_command(priv); @@ -294,36 +289,29 @@ static void lbtf_tx_work(struct work_struct *work) static int lbtf_op_start(struct ieee80211_hw *hw) { struct lbtf_private *priv = hw->priv; - void *card = priv->card; int ret = -1; lbtf_deb_enter(LBTF_DEB_MACOPS); - if (!priv->fw_ready) - /* Upload firmware */ - if (priv->ops->hw_prog_firmware(card)) - goto err_prog_firmware; - /* poke the firmware */ priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE; priv->radioon = RADIO_ON; priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON; ret = lbtf_setup_firmware(priv); if (ret) - goto err_prog_firmware; + goto err_setup_firmware; if ((priv->fwrelease < LBTF_FW_VER_MIN) || (priv->fwrelease > LBTF_FW_VER_MAX)) { ret = -1; - goto err_prog_firmware; + goto err_setup_firmware; } lbtf_deb_leave(LBTF_DEB_MACOPS); return 0; -err_prog_firmware: - priv->ops->hw_reset_device(card); - lbtf_deb_leave_args(LBTF_DEB_MACOPS, "error programming fw; ret=%d", ret); +err_setup_firmware: + lbtf_deb_leave_args(LBTF_DEB_MACOPS, "fw setup error; ret=%d", ret); return ret; } @@ -554,6 +542,11 @@ int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb) lbtf_deb_enter(LBTF_DEB_RX); + if (priv->radioon != RADIO_ON) { + lbtf_deb_rx("rx before we turned on the radio"); + goto done; + } + prxpd = (struct rxpd *) skb->data; memset(&stats, 0, sizeof(stats)); @@ -591,13 +584,14 @@ int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb) ieee80211_rx_irqsafe(priv->hw, skb); +done: lbtf_deb_leave(LBTF_DEB_RX); return 0; } EXPORT_SYMBOL_GPL(lbtf_rx); /** - * lbtf_add_card: Add and initialize the card, no fw upload yet. + * lbtf_add_card: Add and initialize the card. * * @card A pointer to card * @@ -623,6 +617,7 @@ struct lbtf_private *lbtf_add_card(void *card, struct device *dmdev, priv->card = card; priv->ops = ops; priv->tx_skb = NULL; + priv->radioon = RADIO_OFF; hw->queues = 1; ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING); @@ -646,6 +641,18 @@ struct lbtf_private *lbtf_add_card(void *card, struct device *dmdev, INIT_WORK(&priv->cmd_work, lbtf_cmd_work); INIT_WORK(&priv->tx_work, lbtf_tx_work); + + if (priv->ops->hw_prog_firmware(priv)) { + lbtf_deb_usbd(dmdev, "Error programming the firmware\n"); + priv->ops->hw_reset_device(priv); + goto err_init_adapter; + } + + /* The firmware seems to start with the radio enabled. Turn it + * off before an actual mac80211 start callback is invoked. + */ + lbtf_set_radio_control(priv); + if (ieee80211_register_hw(hw)) goto err_init_adapter; -- cgit v1.2.3