From d26833bfce5e56017bea9f1f50838f20e18e7b7e Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Sat, 11 Oct 2014 21:10:36 +0530 Subject: spi/dw: use dmaengine_slave_config() API The drivers should use dmaengine_slave_config() API instead of accessing the device_control which will be deprecated soon Signed-off-by: Vinod Koul Signed-off-by: Mark Brown --- drivers/spi/spi-dw-mid.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index ecae30fe28af..1ca8f66ca2ea 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -143,8 +143,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) txconf.dst_addr_width = dws->dma_width; txconf.device_fc = false; - txchan->device->device_control(txchan, DMA_SLAVE_CONFIG, - (unsigned long) &txconf); + dmaengine_slave_config(txchan, &txconf); memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl)); dws->tx_sgl.dma_address = dws->tx_dma; @@ -166,8 +165,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) rxconf.src_addr_width = dws->dma_width; rxconf.device_fc = false; - rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG, - (unsigned long) &rxconf); + dmaengine_slave_config(txchan, &rxconf); memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl)); dws->rx_sgl.dma_address = dws->rx_dma; -- cgit v1.2.3 From 5398ad6897ec666a416b1d7428f0e8a51adf4254 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Sat, 11 Oct 2014 21:10:35 +0530 Subject: spi/atmel: use dmaengine_terminate_all() API The drivers should use dmaengine_terminate_all() API instead of accessing the device_control which will be deprecated soon Signed-off-by: Vinod Koul Acked-by: Nicolas Ferre Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 113c83f44b5c..649dcb5a603c 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -482,11 +482,9 @@ error: static void atmel_spi_stop_dma(struct atmel_spi *as) { if (as->dma.chan_rx) - as->dma.chan_rx->device->device_control(as->dma.chan_rx, - DMA_TERMINATE_ALL, 0); + dmaengine_terminate_all(as->dma.chan_rx); if (as->dma.chan_tx) - as->dma.chan_tx->device->device_control(as->dma.chan_tx, - DMA_TERMINATE_ALL, 0); + dmaengine_terminate_all(as->dma.chan_tx); } static void atmel_spi_release_dma(struct atmel_spi *as) -- cgit v1.2.3 From ce0c4caf256cb828e0465d3cd363ec145e446e21 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Thu, 16 Oct 2014 17:23:10 +0800 Subject: spi/atmel: add support for runtime PM Drivers should put the device into low power states proactively whenever the device is not in use. Thus implement support for runtime PM and use the autosuspend feature to make sure that we can still perform well in case we see lots of SPI traffic within short period of time. Signed-off-by: Wenyou Yang Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 68 ++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 61 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 649dcb5a603c..bc9d96902837 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -26,6 +26,7 @@ #include #include #include +#include /* SPI register offsets */ #define SPI_CR 0x0000 @@ -191,6 +192,8 @@ #define SPI_DMA_TIMEOUT (msecs_to_jiffies(1000)) +#define AUTOSUSPEND_TIMEOUT 2000 + struct atmel_spi_dma { struct dma_chan *chan_rx; struct dma_chan *chan_tx; @@ -1313,6 +1316,7 @@ static int atmel_spi_probe(struct platform_device *pdev) master->setup = atmel_spi_setup; master->transfer_one_message = atmel_spi_transfer_one_message; master->cleanup = atmel_spi_cleanup; + master->auto_runtime_pm = true; platform_set_drvdata(pdev, master); as = spi_master_get_devdata(master); @@ -1385,6 +1389,11 @@ static int atmel_spi_probe(struct platform_device *pdev) dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n", (unsigned long)regs->start, irq); + pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + ret = devm_spi_register_master(&pdev->dev, master); if (ret) goto out_free_dma; @@ -1392,6 +1401,9 @@ static int atmel_spi_probe(struct platform_device *pdev) return 0; out_free_dma: + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + if (as->use_dma) atmel_spi_release_dma(as); @@ -1413,6 +1425,8 @@ static int atmel_spi_remove(struct platform_device *pdev) struct spi_master *master = platform_get_drvdata(pdev); struct atmel_spi *as = spi_master_get_devdata(master); + pm_runtime_get_sync(&pdev->dev); + /* reset the hardware and block queue progress */ spin_lock_irq(&as->lock); if (as->use_dma) { @@ -1430,9 +1444,13 @@ static int atmel_spi_remove(struct platform_device *pdev) clk_disable_unprepare(as->clk); + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return 0; } +#ifdef CONFIG_PM #ifdef CONFIG_PM_SLEEP static int atmel_spi_suspend(struct device *dev) { @@ -1447,9 +1465,10 @@ static int atmel_spi_suspend(struct device *dev) return ret; } - clk_disable_unprepare(as->clk); - - pinctrl_pm_select_sleep_state(dev); + if (!pm_runtime_suspended(dev)) { + clk_disable_unprepare(as->clk); + pinctrl_pm_select_sleep_state(dev); + } return 0; } @@ -1460,9 +1479,12 @@ static int atmel_spi_resume(struct device *dev) struct atmel_spi *as = spi_master_get_devdata(master); int ret; - pinctrl_pm_select_default_state(dev); - - clk_prepare_enable(as->clk); + if (!pm_runtime_suspended(dev)) { + pinctrl_pm_select_default_state(dev); + ret = clk_prepare_enable(as->clk); + if (ret) + return ret; + } /* Start the queue running */ ret = spi_master_resume(master); @@ -1471,9 +1493,41 @@ static int atmel_spi_resume(struct device *dev) return ret; } +#endif -static SIMPLE_DEV_PM_OPS(atmel_spi_pm_ops, atmel_spi_suspend, atmel_spi_resume); +#ifdef CONFIG_PM_RUNTIME +static int atmel_spi_runtime_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct atmel_spi *as = spi_master_get_devdata(master); + clk_disable_unprepare(as->clk); + pinctrl_pm_select_sleep_state(dev); + + return 0; +} + +static int atmel_spi_runtime_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct atmel_spi *as = spi_master_get_devdata(master); + int ret; + + pinctrl_pm_select_default_state(dev); + + ret = clk_prepare_enable(as->clk); + if (ret) + return ret; + + return 0; +} +#endif + +static const struct dev_pm_ops atmel_spi_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(atmel_spi_suspend, atmel_spi_resume) + SET_RUNTIME_PM_OPS(atmel_spi_runtime_suspend, + atmel_spi_runtime_resume, NULL) +}; #define ATMEL_SPI_PM_OPS (&atmel_spi_pm_ops) #else #define ATMEL_SPI_PM_OPS NULL -- cgit v1.2.3 From d0de6ff6b92665c10a93795e9d041a61f64431af Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Fri, 17 Oct 2014 00:18:56 +0800 Subject: spi/atmel: fix simple_return.cocci warnings drivers/spi/spi-atmel.c:1518:1-4: WARNING: end returns can be simpified and declaration on line 1514 can be dropped Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci Signed-off-by: Fengguang Wu Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index bc9d96902837..3f500142f13c 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1511,15 +1511,10 @@ static int atmel_spi_runtime_resume(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); struct atmel_spi *as = spi_master_get_devdata(master); - int ret; pinctrl_pm_select_default_state(dev); - ret = clk_prepare_enable(as->clk); - if (ret) - return ret; - - return 0; + return clk_prepare_enable(as->clk); } #endif -- cgit v1.2.3 From 409851c38c742e56747b1911a5091e22b6c8514f Mon Sep 17 00:00:00 2001 From: Xiubo Li Date: Thu, 9 Oct 2014 11:27:45 +0800 Subject: spi: fsl-dspi: remove useless code for dspi driver. Since we are using regmap framework's internal locks, so the lock_arg for dspi_regmap_config is redundant here. This patch just remove it, and then the dspi_regmap_config could be const type. Signed-off-by: Xiubo Li Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 448216025ce8..12dc99546394 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -438,7 +438,7 @@ static int dspi_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(dspi_pm, dspi_suspend, dspi_resume); -static struct regmap_config dspi_regmap_config = { +static const struct regmap_config dspi_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, @@ -492,7 +492,6 @@ static int dspi_probe(struct platform_device *pdev) goto out_master_put; } - dspi_regmap_config.lock_arg = dspi; dspi->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "dspi", base, &dspi_regmap_config); if (IS_ERR(dspi->regmap)) { -- cgit v1.2.3 From c1ee8f3fdff2b5763fe13be0a50a7ab3df015f5b Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Tue, 21 Oct 2014 11:43:34 +0800 Subject: spi/atmel: improve the system suspend/resume functions implementation To make it cleaner, the system suspend/resume directly call the runtime suspend/resume functions and remove the wapper of CONFIG_PM_RUNTIME, CONFIG_PM_SLEEP. Signed-off-by: Wenyou Yang Acked-by: Kevin Hilman Acked-by: Nicolas Ferre Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 61 +++++++++++++++++++++---------------------------- 1 file changed, 26 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 3f500142f13c..6ed18934dffe 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1451,11 +1451,30 @@ static int atmel_spi_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -#ifdef CONFIG_PM_SLEEP +static int atmel_spi_runtime_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct atmel_spi *as = spi_master_get_devdata(master); + + clk_disable_unprepare(as->clk); + pinctrl_pm_select_sleep_state(dev); + + return 0; +} + +static int atmel_spi_runtime_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct atmel_spi *as = spi_master_get_devdata(master); + + pinctrl_pm_select_default_state(dev); + + return clk_prepare_enable(as->clk); +} + static int atmel_spi_suspend(struct device *dev) { - struct spi_master *master = dev_get_drvdata(dev); - struct atmel_spi *as = spi_master_get_devdata(master); + struct spi_master *master = dev_get_drvdata(dev); int ret; /* Stop the queue running */ @@ -1465,23 +1484,19 @@ static int atmel_spi_suspend(struct device *dev) return ret; } - if (!pm_runtime_suspended(dev)) { - clk_disable_unprepare(as->clk); - pinctrl_pm_select_sleep_state(dev); - } + if (!pm_runtime_suspended(dev)) + atmel_spi_runtime_suspend(dev); return 0; } static int atmel_spi_resume(struct device *dev) { - struct spi_master *master = dev_get_drvdata(dev); - struct atmel_spi *as = spi_master_get_devdata(master); + struct spi_master *master = dev_get_drvdata(dev); int ret; if (!pm_runtime_suspended(dev)) { - pinctrl_pm_select_default_state(dev); - ret = clk_prepare_enable(as->clk); + ret = atmel_spi_runtime_resume(dev); if (ret) return ret; } @@ -1493,30 +1508,6 @@ static int atmel_spi_resume(struct device *dev) return ret; } -#endif - -#ifdef CONFIG_PM_RUNTIME -static int atmel_spi_runtime_suspend(struct device *dev) -{ - struct spi_master *master = dev_get_drvdata(dev); - struct atmel_spi *as = spi_master_get_devdata(master); - - clk_disable_unprepare(as->clk); - pinctrl_pm_select_sleep_state(dev); - - return 0; -} - -static int atmel_spi_runtime_resume(struct device *dev) -{ - struct spi_master *master = dev_get_drvdata(dev); - struct atmel_spi *as = spi_master_get_devdata(master); - - pinctrl_pm_select_default_state(dev); - - return clk_prepare_enable(as->clk); -} -#endif static const struct dev_pm_ops atmel_spi_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(atmel_spi_suspend, atmel_spi_resume) -- cgit v1.2.3 From a5c2db964d3eb26b41bd7abc1b13486f732b3aa2 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 28 Oct 2014 18:25:01 +0200 Subject: spi: dw-mid: refactor to use helpers This patch splits few helpers, namely dw_spi_dma_prepare_rx(), dw_spi_dma_prepare_tx(), and dw_spi_dma_setup() which will be useful for the consequent improvements. There is no functional change. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-mid.c | 69 +++++++++++++++++++++++++++++++++--------------- 1 file changed, 48 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index 46c6d58e1fda..c8319ab0bbdf 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -111,28 +111,11 @@ static void dw_spi_dma_done(void *arg) dw_spi_xfer_done(dws); } -static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) +static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws) { - struct dma_async_tx_descriptor *txdesc, *rxdesc; - struct dma_slave_config txconf, rxconf; - u16 dma_ctrl = 0; - - /* 1. setup DMA related registers */ - if (cs_change) { - spi_enable_chip(dws, 0); - dw_writew(dws, DW_SPI_DMARDLR, 0xf); - dw_writew(dws, DW_SPI_DMATDLR, 0x10); - if (dws->tx_dma) - dma_ctrl |= SPI_DMA_TDMAE; - if (dws->rx_dma) - dma_ctrl |= SPI_DMA_RDMAE; - dw_writew(dws, DW_SPI_DMACR, dma_ctrl); - spi_enable_chip(dws, 1); - } + struct dma_slave_config txconf; + struct dma_async_tx_descriptor *txdesc; - dws->dma_chan_done = 0; - - /* 2. Prepare the TX dma transfer */ txconf.direction = DMA_MEM_TO_DEV; txconf.dst_addr = dws->dma_addr; txconf.dst_maxburst = LNW_DMA_MSIZE_16; @@ -154,7 +137,14 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) txdesc->callback = dw_spi_dma_done; txdesc->callback_param = dws; - /* 3. Prepare the RX dma transfer */ + return txdesc; +} + +static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws) +{ + struct dma_slave_config rxconf; + struct dma_async_tx_descriptor *rxdesc; + rxconf.direction = DMA_DEV_TO_MEM; rxconf.src_addr = dws->dma_addr; rxconf.src_maxburst = LNW_DMA_MSIZE_16; @@ -176,6 +166,43 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) rxdesc->callback = dw_spi_dma_done; rxdesc->callback_param = dws; + return rxdesc; +} + +static void dw_spi_dma_setup(struct dw_spi *dws) +{ + u16 dma_ctrl = 0; + + spi_enable_chip(dws, 0); + + dw_writew(dws, DW_SPI_DMARDLR, 0xf); + dw_writew(dws, DW_SPI_DMATDLR, 0x10); + + if (dws->tx_dma) + dma_ctrl |= SPI_DMA_TDMAE; + if (dws->rx_dma) + dma_ctrl |= SPI_DMA_RDMAE; + dw_writew(dws, DW_SPI_DMACR, dma_ctrl); + + spi_enable_chip(dws, 1); +} + +static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) +{ + struct dma_async_tx_descriptor *txdesc, *rxdesc; + + /* 1. setup DMA related registers */ + if (cs_change) + dw_spi_dma_setup(dws); + + dws->dma_chan_done = 0; + + /* 2. Prepare the TX dma transfer */ + txdesc = dw_spi_dma_prepare_tx(dws); + + /* 3. Prepare the RX dma transfer */ + rxdesc = dw_spi_dma_prepare_rx(dws); + /* rx must be started before tx due to spi instinct */ dmaengine_submit(rxdesc); dma_async_issue_pending(dws->rxchan); -- cgit v1.2.3 From 30c8eb52cc4a7bed59d85243e769ce420f179140 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 28 Oct 2014 18:25:02 +0200 Subject: spi: dw-mid: split rx and tx callbacks when DMA Currently driver wouldn't work properly if user asked for simplex transfer. The patch separates DMA rx and tx callbacks and finishes transfer correctly in any case. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-mid.c | 53 +++++++++++++++++++++++++++++++++++------------- drivers/spi/spi-dw.h | 2 +- 2 files changed, 40 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index c8319ab0bbdf..7281316a5ecb 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -26,6 +26,9 @@ #include #include +#define RX_BUSY 0 +#define TX_BUSY 1 + struct mid_dma { struct intel_mid_dma_slave dmas_tx; struct intel_mid_dma_slave dmas_rx; @@ -98,15 +101,14 @@ static void mid_spi_dma_exit(struct dw_spi *dws) } /* - * dws->dma_chan_done is cleared before the dma transfer starts, - * callback for rx/tx channel will each increment it by 1. - * Reaching 2 means the whole spi transaction is done. + * dws->dma_chan_busy is set before the dma transfer starts, callback for tx + * channel will clear a corresponding bit. */ -static void dw_spi_dma_done(void *arg) +static void dw_spi_dma_tx_done(void *arg) { struct dw_spi *dws = arg; - if (++dws->dma_chan_done != 2) + if (test_and_clear_bit(TX_BUSY, &dws->dma_chan_busy) & BIT(RX_BUSY)) return; dw_spi_xfer_done(dws); } @@ -116,6 +118,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws) struct dma_slave_config txconf; struct dma_async_tx_descriptor *txdesc; + if (!dws->tx_dma) + return NULL; + txconf.direction = DMA_MEM_TO_DEV; txconf.dst_addr = dws->dma_addr; txconf.dst_maxburst = LNW_DMA_MSIZE_16; @@ -134,17 +139,33 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws) 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - txdesc->callback = dw_spi_dma_done; + txdesc->callback = dw_spi_dma_tx_done; txdesc->callback_param = dws; return txdesc; } +/* + * dws->dma_chan_busy is set before the dma transfer starts, callback for rx + * channel will clear a corresponding bit. + */ +static void dw_spi_dma_rx_done(void *arg) +{ + struct dw_spi *dws = arg; + + if (test_and_clear_bit(RX_BUSY, &dws->dma_chan_busy) & BIT(TX_BUSY)) + return; + dw_spi_xfer_done(dws); +} + static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws) { struct dma_slave_config rxconf; struct dma_async_tx_descriptor *rxdesc; + if (!dws->rx_dma) + return NULL; + rxconf.direction = DMA_DEV_TO_MEM; rxconf.src_addr = dws->dma_addr; rxconf.src_maxburst = LNW_DMA_MSIZE_16; @@ -163,7 +184,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws) 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - rxdesc->callback = dw_spi_dma_done; + rxdesc->callback = dw_spi_dma_rx_done; rxdesc->callback_param = dws; return rxdesc; @@ -195,8 +216,6 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) if (cs_change) dw_spi_dma_setup(dws); - dws->dma_chan_done = 0; - /* 2. Prepare the TX dma transfer */ txdesc = dw_spi_dma_prepare_tx(dws); @@ -204,11 +223,17 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) rxdesc = dw_spi_dma_prepare_rx(dws); /* rx must be started before tx due to spi instinct */ - dmaengine_submit(rxdesc); - dma_async_issue_pending(dws->rxchan); - - dmaengine_submit(txdesc); - dma_async_issue_pending(dws->txchan); + if (rxdesc) { + set_bit(RX_BUSY, &dws->dma_chan_busy); + dmaengine_submit(rxdesc); + dma_async_issue_pending(dws->rxchan); + } + + if (txdesc) { + set_bit(TX_BUSY, &dws->dma_chan_busy); + dmaengine_submit(txdesc); + dma_async_issue_pending(dws->txchan); + } return 0; } diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 83a103a76481..3d32be68c142 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -139,7 +139,7 @@ struct dw_spi { struct scatterlist tx_sgl; struct dma_chan *rxchan; struct scatterlist rx_sgl; - int dma_chan_done; + unsigned long dma_chan_busy; struct device *dma_dev; dma_addr_t dma_addr; /* phy address of the Data register */ struct dw_spi_dma_ops *dma_ops; -- cgit v1.2.3 From d1d81802522ade84128a2c66c0d500e372474dca Mon Sep 17 00:00:00 2001 From: Torsten Fleischer Date: Mon, 3 Nov 2014 17:17:55 +0100 Subject: spi: spi-gpio: Add dt support for a single device with no chip select In order to describe a single slave device that has no chip select line the 'num-chipselects' property has to be <0> and the 'cs-gpios' property doesn't need to be set. Signed-off-by: Torsten Fleischer Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/spi-gpio.txt | 6 ++++-- drivers/spi/spi-gpio.c | 21 +++++++++++++++------ 2 files changed, 19 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.txt b/Documentation/devicetree/bindings/spi/spi-gpio.txt index 8a824be15754..a95603bcf6ff 100644 --- a/Documentation/devicetree/bindings/spi/spi-gpio.txt +++ b/Documentation/devicetree/bindings/spi/spi-gpio.txt @@ -8,8 +8,10 @@ Required properties: - gpio-sck: GPIO spec for the SCK line to use - gpio-miso: GPIO spec for the MISO line to use - gpio-mosi: GPIO spec for the MOSI line to use - - cs-gpios: GPIOs to use for chipselect lines - - num-chipselects: number of chipselect lines + - cs-gpios: GPIOs to use for chipselect lines. + Not needed if num-chipselects = <0>. + - num-chipselects: Number of chipselect lines. Should be <0> if a single device + with no chip select is connected. Example: diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index 9f595535cf27..f0492c99d145 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -413,6 +413,7 @@ static int spi_gpio_probe(struct platform_device *pdev) struct spi_gpio_platform_data *pdata; u16 master_flags = 0; bool use_of = 0; + int num_devices; status = spi_gpio_probe_dt(pdev); if (status < 0) @@ -422,16 +423,21 @@ static int spi_gpio_probe(struct platform_device *pdev) pdata = dev_get_platdata(&pdev->dev); #ifdef GENERIC_BITBANG - if (!pdata || !pdata->num_chipselect) + if (!pdata || (!use_of && !pdata->num_chipselect)) return -ENODEV; #endif + if (use_of && !SPI_N_CHIPSEL) + num_devices = 1; + else + num_devices = SPI_N_CHIPSEL; + status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags); if (status < 0) return status; master = spi_alloc_master(&pdev->dev, sizeof(*spi_gpio) + - (sizeof(int) * SPI_N_CHIPSEL)); + (sizeof(int) * num_devices)); if (!master) { status = -ENOMEM; goto gpio_free; @@ -446,7 +452,7 @@ static int spi_gpio_probe(struct platform_device *pdev) master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); master->flags = master_flags; master->bus_num = pdev->id; - master->num_chipselect = SPI_N_CHIPSEL; + master->num_chipselect = num_devices; master->setup = spi_gpio_setup; master->cleanup = spi_gpio_cleanup; #ifdef CONFIG_OF @@ -461,9 +467,12 @@ static int spi_gpio_probe(struct platform_device *pdev) * property of the node. */ - for (i = 0; i < SPI_N_CHIPSEL; i++) - spi_gpio->cs_gpios[i] = - of_get_named_gpio(np, "cs-gpios", i); + if (!SPI_N_CHIPSEL) + spi_gpio->cs_gpios[0] = SPI_GPIO_NO_CHIPSELECT; + else + for (i = 0; i < SPI_N_CHIPSEL; i++) + spi_gpio->cs_gpios[i] = + of_get_named_gpio(np, "cs-gpios", i); } #endif -- cgit v1.2.3 From cfb4bbd8fbed76a6b715916fabeca4597cb38721 Mon Sep 17 00:00:00 2001 From: Torsten Fleischer Date: Fri, 7 Nov 2014 18:11:58 +0100 Subject: spi: spi-gpio: Fix compiler warning when building for 64 bit systems The assignment of SPI_GPIO_NO_CHIPSELECT to cs_gpios[0] causes the following compiler warning, when building for 64 bit systems: "warning: overflow in implicit constant conversion [-Woverflow]". This is because the SPI_GPIO_NO_CHIPSELECT flag is a '-1' type casted to unsigned long and cs_gpios is of the type int. Furthermore the chip select's GPIO number is locally stored as unsigned int and compared with SPI_GPIO_NO_CHIPSELECT. Thus the result of the comparison is always false, if unsigned long and unsigned int have a different size. As part of the fix this patch adds a check for the device tree's cs-gpios property. Reported-by: kbuild test robot Signed-off-by: Torsten Fleischer Signed-off-by: Mark Brown --- drivers/spi/spi-gpio.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index f0492c99d145..4b600d4f8548 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -48,7 +48,7 @@ struct spi_gpio { struct spi_bitbang bitbang; struct spi_gpio_platform_data pdata; struct platform_device *pdev; - int cs_gpios[0]; + unsigned long cs_gpios[0]; }; /*----------------------------------------------------------------------*/ @@ -220,7 +220,7 @@ static u32 spi_gpio_spec_txrx_word_mode3(struct spi_device *spi, static void spi_gpio_chipselect(struct spi_device *spi, int is_active) { struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi); - unsigned int cs = spi_gpio->cs_gpios[spi->chip_select]; + unsigned long cs = spi_gpio->cs_gpios[spi->chip_select]; /* set initial clock polarity */ if (is_active) @@ -234,7 +234,7 @@ static void spi_gpio_chipselect(struct spi_device *spi, int is_active) static int spi_gpio_setup(struct spi_device *spi) { - unsigned int cs; + unsigned long cs; int status = 0; struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi); struct device_node *np = spi->master->dev.of_node; @@ -249,7 +249,7 @@ static int spi_gpio_setup(struct spi_device *spi) /* * ... otherwise, take it from spi->controller_data */ - cs = (unsigned int)(uintptr_t) spi->controller_data; + cs = (uintptr_t) spi->controller_data; } if (!spi->controller_state) { @@ -277,7 +277,7 @@ static int spi_gpio_setup(struct spi_device *spi) static void spi_gpio_cleanup(struct spi_device *spi) { struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi); - unsigned int cs = spi_gpio->cs_gpios[spi->chip_select]; + unsigned long cs = spi_gpio->cs_gpios[spi->chip_select]; if (cs != SPI_GPIO_NO_CHIPSELECT) gpio_free(cs); @@ -437,7 +437,7 @@ static int spi_gpio_probe(struct platform_device *pdev) return status; master = spi_alloc_master(&pdev->dev, sizeof(*spi_gpio) + - (sizeof(int) * num_devices)); + (sizeof(unsigned long) * num_devices)); if (!master) { status = -ENOMEM; goto gpio_free; @@ -470,9 +470,15 @@ static int spi_gpio_probe(struct platform_device *pdev) if (!SPI_N_CHIPSEL) spi_gpio->cs_gpios[0] = SPI_GPIO_NO_CHIPSELECT; else - for (i = 0; i < SPI_N_CHIPSEL; i++) - spi_gpio->cs_gpios[i] = - of_get_named_gpio(np, "cs-gpios", i); + for (i = 0; i < SPI_N_CHIPSEL; i++) { + status = of_get_named_gpio(np, "cs-gpios", i); + if (status < 0) { + dev_err(&pdev->dev, + "invalid cs-gpios property\n"); + goto gpio_free; + } + spi_gpio->cs_gpios[i] = status; + } } #endif -- cgit v1.2.3 From 617100c2711691e07728d3201fbcfa845a7c36d5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 10 Nov 2014 17:25:24 -0200 Subject: spi: spi-mxs: Register the irq with the device name Instead of registering the irq name with the driver name, it's better to pass the device name so that we have a more explicit indication as to what spi instance the irq is related: $ cat /proc/interrupts CPU0 ... 27: 0 - 98 80014000.ssp Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- drivers/spi/spi-mxs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index 51460878af04..a9e72f9d385e 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -511,7 +511,7 @@ static int mxs_spi_probe(struct platform_device *pdev) init_completion(&spi->c); ret = devm_request_irq(&pdev->dev, irq_err, mxs_ssp_irq_handler, 0, - DRIVER_NAME, ssp); + dev_name(&pdev->dev), ssp); if (ret) goto out_master_free; -- cgit v1.2.3 From 9169051617df7fca597274e9e43324332cb8f0ee Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 8 Nov 2014 10:28:10 +0000 Subject: spi: spidev: Don't mangle max_speed_hz in underlying spi device Currently spidev allows callers to set the default speed by overriding the max_speed_hz in the underlying device. This achieves the immediate goal but is not what devices expect and can easily lead to userspace trying to set unsupported speeds and succeeding, apart from anything else drivers can't set a limit on the speed using max_speed_hz as they'd expect and any other devices on the bus will be affected. Instead store the default speed in the spidev struct and fill this in on each transfer. Signed-off-by: Mark Brown --- drivers/spi/spidev.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index e50039fb1474..6941e04afb8c 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -87,6 +87,7 @@ struct spidev_data { unsigned users; u8 *tx_buffer; u8 *rx_buffer; + u32 speed_hz; }; static LIST_HEAD(device_list); @@ -138,6 +139,7 @@ spidev_sync_write(struct spidev_data *spidev, size_t len) struct spi_transfer t = { .tx_buf = spidev->tx_buffer, .len = len, + .speed_hz = spidev->speed_hz, }; struct spi_message m; @@ -152,6 +154,7 @@ spidev_sync_read(struct spidev_data *spidev, size_t len) struct spi_transfer t = { .rx_buf = spidev->rx_buffer, .len = len, + .speed_hz = spidev->speed_hz, }; struct spi_message m; @@ -274,6 +277,8 @@ static int spidev_message(struct spidev_data *spidev, k_tmp->bits_per_word = u_tmp->bits_per_word; k_tmp->delay_usecs = u_tmp->delay_usecs; k_tmp->speed_hz = u_tmp->speed_hz; + if (!k_tmp->speed_hz) + k_tmp->speed_hz = spidev->speed_hz; #ifdef VERBOSE dev_dbg(&spidev->spi->dev, " xfer len %zd %s%s%s%dbits %u usec %uHz\n", @@ -377,7 +382,7 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) retval = __put_user(spi->bits_per_word, (__u8 __user *)arg); break; case SPI_IOC_RD_MAX_SPEED_HZ: - retval = __put_user(spi->max_speed_hz, (__u32 __user *)arg); + retval = __put_user(spidev->speed_hz, (__u32 __user *)arg); break; /* write requests */ @@ -441,10 +446,11 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) spi->max_speed_hz = tmp; retval = spi_setup(spi); - if (retval < 0) - spi->max_speed_hz = save; + if (retval >= 0) + spidev->speed_hz = tmp; else dev_dbg(&spi->dev, "%d Hz (max)\n", tmp); + spi->max_speed_hz = save; } break; @@ -570,6 +576,8 @@ static int spidev_release(struct inode *inode, struct file *filp) kfree(spidev->rx_buffer); spidev->rx_buffer = NULL; + spidev->speed_hz = spidev->spi->max_speed_hz; + /* ... after we unbound from the underlying device? */ spin_lock_irq(&spidev->spi_lock); dofree = (spidev->spi == NULL); @@ -650,6 +658,8 @@ static int spidev_probe(struct spi_device *spi) } mutex_unlock(&device_list_lock); + spidev->speed_hz = spi->max_speed_hz; + if (status == 0) spi_set_drvdata(spi, spidev); else -- cgit v1.2.3 From dfcc2e3549b5d57886d4ce6b4762bd4b64f6f945 Mon Sep 17 00:00:00 2001 From: Laurentiu Palcu Date: Tue, 11 Nov 2014 15:22:51 +0200 Subject: spi/rockchip: remove redundant call to spi_master_put() The call to spi_master_put() in rockchip_spi_remove() is redundant since the master is registered using devm_. This patch removes it. Signed-off-by: Laurentiu Palcu Signed-off-by: Mark Brown --- drivers/spi/spi-rockchip.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index f96ea8a38d64..08897d34ce33 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -723,8 +723,6 @@ static int rockchip_spi_remove(struct platform_device *pdev) if (rs->dma_rx.ch) dma_release_channel(rs->dma_rx.ch); - spi_master_put(master); - return 0; } -- cgit v1.2.3 From deba25800a12b99e1a68bc83d33709be4b9a40b7 Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Fri, 14 Nov 2014 10:48:32 -0800 Subject: spi: Add driver for IMG SPFI controller Add support for the Synchronous Peripheral Flash Interface (SPFI) master controller found on IMG SoCs. The SPFI controller supports 5 chip-select lines and single/dual/quad mode SPI transfers. Signed-off-by: Andrew Bresticker Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi-img-spfi.c | 746 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 754 insertions(+) create mode 100644 drivers/spi/spi-img-spfi.c (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 84e7c9e6ccef..98de2074e8fe 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -225,6 +225,13 @@ config SPI_GPIO GPIO operations, you should be able to leverage that for better speed with a custom version of this driver; see the source code. +config SPI_IMG_SPFI + tristate "IMG SPFI controller" + depends on MIPS || COMPILE_TEST + help + This enables support for the SPFI master controller found on + IMG SoCs. + config SPI_IMX tristate "Freescale i.MX SPI controllers" depends on ARCH_MXC || COMPILE_TEST diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 78f24ca36fcf..37dc2e7d2c7e 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-lib.o obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o obj-$(CONFIG_SPI_GPIO) += spi-gpio.o +obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o obj-$(CONFIG_SPI_IMX) += spi-imx.o obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c new file mode 100644 index 000000000000..43781c9fe521 --- /dev/null +++ b/drivers/spi/spi-img-spfi.c @@ -0,0 +1,746 @@ +/* + * IMG SPFI controller driver + * + * Copyright (C) 2007,2008,2013 Imagination Technologies Ltd. + * Copyright (C) 2014 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SPFI_DEVICE_PARAMETER(x) (0x00 + 0x4 * (x)) +#define SPFI_DEVICE_PARAMETER_BITCLK_SHIFT 24 +#define SPFI_DEVICE_PARAMETER_BITCLK_MASK 0xff +#define SPFI_DEVICE_PARAMETER_CSSETUP_SHIFT 16 +#define SPFI_DEVICE_PARAMETER_CSSETUP_MASK 0xff +#define SPFI_DEVICE_PARAMETER_CSHOLD_SHIFT 8 +#define SPFI_DEVICE_PARAMETER_CSHOLD_MASK 0xff +#define SPFI_DEVICE_PARAMETER_CSDELAY_SHIFT 0 +#define SPFI_DEVICE_PARAMETER_CSDELAY_MASK 0xff + +#define SPFI_CONTROL 0x14 +#define SPFI_CONTROL_CONTINUE BIT(12) +#define SPFI_CONTROL_SOFT_RESET BIT(11) +#define SPFI_CONTROL_SEND_DMA BIT(10) +#define SPFI_CONTROL_GET_DMA BIT(9) +#define SPFI_CONTROL_TMODE_SHIFT 5 +#define SPFI_CONTROL_TMODE_MASK 0x7 +#define SPFI_CONTROL_TMODE_SINGLE 0 +#define SPFI_CONTROL_TMODE_DUAL 1 +#define SPFI_CONTROL_TMODE_QUAD 2 +#define SPFI_CONTROL_SPFI_EN BIT(0) + +#define SPFI_TRANSACTION 0x18 +#define SPFI_TRANSACTION_TSIZE_SHIFT 16 +#define SPFI_TRANSACTION_TSIZE_MASK 0xffff + +#define SPFI_PORT_STATE 0x1c +#define SPFI_PORT_STATE_DEV_SEL_SHIFT 20 +#define SPFI_PORT_STATE_DEV_SEL_MASK 0x7 +#define SPFI_PORT_STATE_CK_POL(x) BIT(19 - (x)) +#define SPFI_PORT_STATE_CK_PHASE(x) BIT(14 - (x)) + +#define SPFI_TX_32BIT_VALID_DATA 0x20 +#define SPFI_TX_8BIT_VALID_DATA 0x24 +#define SPFI_RX_32BIT_VALID_DATA 0x28 +#define SPFI_RX_8BIT_VALID_DATA 0x2c + +#define SPFI_INTERRUPT_STATUS 0x30 +#define SPFI_INTERRUPT_ENABLE 0x34 +#define SPFI_INTERRUPT_CLEAR 0x38 +#define SPFI_INTERRUPT_IACCESS BIT(12) +#define SPFI_INTERRUPT_GDEX8BIT BIT(11) +#define SPFI_INTERRUPT_ALLDONETRIG BIT(9) +#define SPFI_INTERRUPT_GDFUL BIT(8) +#define SPFI_INTERRUPT_GDHF BIT(7) +#define SPFI_INTERRUPT_GDEX32BIT BIT(6) +#define SPFI_INTERRUPT_GDTRIG BIT(5) +#define SPFI_INTERRUPT_SDFUL BIT(3) +#define SPFI_INTERRUPT_SDHF BIT(2) +#define SPFI_INTERRUPT_SDE BIT(1) +#define SPFI_INTERRUPT_SDTRIG BIT(0) + +/* + * There are four parallel FIFOs of 16 bytes each. The word buffer + * (*_32BIT_VALID_DATA) accesses all four FIFOs at once, resulting in an + * effective FIFO size of 64 bytes. The byte buffer (*_8BIT_VALID_DATA) + * accesses only a single FIFO, resulting in an effective FIFO size of + * 16 bytes. + */ +#define SPFI_32BIT_FIFO_SIZE 64 +#define SPFI_8BIT_FIFO_SIZE 16 + +struct img_spfi { + struct device *dev; + struct spi_master *master; + spinlock_t lock; + + void __iomem *regs; + phys_addr_t phys; + int irq; + struct clk *spfi_clk; + struct clk *sys_clk; + + struct dma_chan *rx_ch; + struct dma_chan *tx_ch; + bool tx_dma_busy; + bool rx_dma_busy; +}; + +static inline u32 spfi_readl(struct img_spfi *spfi, u32 reg) +{ + return readl(spfi->regs + reg); +} + +static inline void spfi_writel(struct img_spfi *spfi, u32 val, u32 reg) +{ + writel(val, spfi->regs + reg); +} + +static inline void spfi_start(struct img_spfi *spfi) +{ + u32 val; + + val = spfi_readl(spfi, SPFI_CONTROL); + val |= SPFI_CONTROL_SPFI_EN; + spfi_writel(spfi, val, SPFI_CONTROL); +} + +static inline void spfi_stop(struct img_spfi *spfi) +{ + u32 val; + + val = spfi_readl(spfi, SPFI_CONTROL); + val &= ~SPFI_CONTROL_SPFI_EN; + spfi_writel(spfi, val, SPFI_CONTROL); +} + +static inline void spfi_reset(struct img_spfi *spfi) +{ + spfi_writel(spfi, SPFI_CONTROL_SOFT_RESET, SPFI_CONTROL); + udelay(1); + spfi_writel(spfi, 0, SPFI_CONTROL); +} + +static void spfi_flush_tx_fifo(struct img_spfi *spfi) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(10); + + spfi_writel(spfi, SPFI_INTERRUPT_SDE, SPFI_INTERRUPT_CLEAR); + while (time_before(jiffies, timeout)) { + if (spfi_readl(spfi, SPFI_INTERRUPT_STATUS) & + SPFI_INTERRUPT_SDE) + return; + cpu_relax(); + } + + dev_err(spfi->dev, "Timed out waiting for FIFO to drain\n"); + spfi_reset(spfi); +} + +static unsigned int spfi_pio_write32(struct img_spfi *spfi, const u32 *buf, + unsigned int max) +{ + unsigned int count = 0; + u32 status; + + while (count < max) { + spfi_writel(spfi, SPFI_INTERRUPT_SDFUL, SPFI_INTERRUPT_CLEAR); + status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS); + if (status & SPFI_INTERRUPT_SDFUL) + break; + spfi_writel(spfi, buf[count / 4], SPFI_TX_32BIT_VALID_DATA); + count += 4; + } + + return count; +} + +static unsigned int spfi_pio_write8(struct img_spfi *spfi, const u8 *buf, + unsigned int max) +{ + unsigned int count = 0; + u32 status; + + while (count < max) { + spfi_writel(spfi, SPFI_INTERRUPT_SDFUL, SPFI_INTERRUPT_CLEAR); + status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS); + if (status & SPFI_INTERRUPT_SDFUL) + break; + spfi_writel(spfi, buf[count], SPFI_TX_8BIT_VALID_DATA); + count++; + } + + return count; +} + +static unsigned int spfi_pio_read32(struct img_spfi *spfi, u32 *buf, + unsigned int max) +{ + unsigned int count = 0; + u32 status; + + while (count < max) { + spfi_writel(spfi, SPFI_INTERRUPT_GDEX32BIT, + SPFI_INTERRUPT_CLEAR); + status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS); + if (!(status & SPFI_INTERRUPT_GDEX32BIT)) + break; + buf[count / 4] = spfi_readl(spfi, SPFI_RX_32BIT_VALID_DATA); + count += 4; + } + + return count; +} + +static unsigned int spfi_pio_read8(struct img_spfi *spfi, u8 *buf, + unsigned int max) +{ + unsigned int count = 0; + u32 status; + + while (count < max) { + spfi_writel(spfi, SPFI_INTERRUPT_GDEX8BIT, + SPFI_INTERRUPT_CLEAR); + status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS); + if (!(status & SPFI_INTERRUPT_GDEX8BIT)) + break; + buf[count] = spfi_readl(spfi, SPFI_RX_8BIT_VALID_DATA); + count++; + } + + return count; +} + +static int img_spfi_start_pio(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct img_spfi *spfi = spi_master_get_devdata(spi->master); + unsigned int tx_bytes = 0, rx_bytes = 0; + const void *tx_buf = xfer->tx_buf; + void *rx_buf = xfer->rx_buf; + unsigned long timeout; + + if (tx_buf) + tx_bytes = xfer->len; + if (rx_buf) + rx_bytes = xfer->len; + + spfi_start(spfi); + + timeout = jiffies + + msecs_to_jiffies(xfer->len * 8 * 1000 / xfer->speed_hz + 100); + while ((tx_bytes > 0 || rx_bytes > 0) && + time_before(jiffies, timeout)) { + unsigned int tx_count, rx_count; + + switch (xfer->bits_per_word) { + case 32: + tx_count = spfi_pio_write32(spfi, tx_buf, tx_bytes); + rx_count = spfi_pio_read32(spfi, rx_buf, rx_bytes); + break; + case 8: + default: + tx_count = spfi_pio_write8(spfi, tx_buf, tx_bytes); + rx_count = spfi_pio_read8(spfi, rx_buf, rx_bytes); + break; + } + + tx_buf += tx_count; + rx_buf += rx_count; + tx_bytes -= tx_count; + rx_bytes -= rx_count; + + cpu_relax(); + } + + if (rx_bytes > 0 || tx_bytes > 0) { + dev_err(spfi->dev, "PIO transfer timed out\n"); + spfi_reset(spfi); + return -ETIMEDOUT; + } + + if (tx_buf) + spfi_flush_tx_fifo(spfi); + spfi_stop(spfi); + + return 0; +} + +static void img_spfi_dma_rx_cb(void *data) +{ + struct img_spfi *spfi = data; + unsigned long flags; + + spin_lock_irqsave(&spfi->lock, flags); + + spfi->rx_dma_busy = false; + if (!spfi->tx_dma_busy) { + spfi_stop(spfi); + spi_finalize_current_transfer(spfi->master); + } + + spin_unlock_irqrestore(&spfi->lock, flags); +} + +static void img_spfi_dma_tx_cb(void *data) +{ + struct img_spfi *spfi = data; + unsigned long flags; + + spfi_flush_tx_fifo(spfi); + + spin_lock_irqsave(&spfi->lock, flags); + + spfi->tx_dma_busy = false; + if (!spfi->rx_dma_busy) { + spfi_stop(spfi); + spi_finalize_current_transfer(spfi->master); + } + + spin_unlock_irqrestore(&spfi->lock, flags); +} + +static int img_spfi_start_dma(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct img_spfi *spfi = spi_master_get_devdata(spi->master); + struct dma_async_tx_descriptor *rxdesc = NULL, *txdesc = NULL; + struct dma_slave_config rxconf, txconf; + + spfi->rx_dma_busy = false; + spfi->tx_dma_busy = false; + + if (xfer->rx_buf) { + rxconf.direction = DMA_DEV_TO_MEM; + switch (xfer->bits_per_word) { + case 32: + rxconf.src_addr = spfi->phys + SPFI_RX_32BIT_VALID_DATA; + rxconf.src_addr_width = 4; + rxconf.src_maxburst = 4; + break; + case 8: + default: + rxconf.src_addr = spfi->phys + SPFI_RX_8BIT_VALID_DATA; + rxconf.src_addr_width = 1; + rxconf.src_maxburst = 1; + } + dmaengine_slave_config(spfi->rx_ch, &rxconf); + + rxdesc = dmaengine_prep_slave_sg(spfi->rx_ch, xfer->rx_sg.sgl, + xfer->rx_sg.nents, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!rxdesc) + goto stop_dma; + + rxdesc->callback = img_spfi_dma_rx_cb; + rxdesc->callback_param = spfi; + } + + if (xfer->tx_buf) { + txconf.direction = DMA_MEM_TO_DEV; + switch (xfer->bits_per_word) { + case 32: + txconf.dst_addr = spfi->phys + SPFI_TX_32BIT_VALID_DATA; + txconf.dst_addr_width = 4; + txconf.dst_maxburst = 4; + break; + case 8: + default: + txconf.dst_addr = spfi->phys + SPFI_TX_8BIT_VALID_DATA; + txconf.dst_addr_width = 1; + txconf.dst_maxburst = 1; + break; + } + dmaengine_slave_config(spfi->tx_ch, &txconf); + + txdesc = dmaengine_prep_slave_sg(spfi->tx_ch, xfer->tx_sg.sgl, + xfer->tx_sg.nents, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT); + if (!txdesc) + goto stop_dma; + + txdesc->callback = img_spfi_dma_tx_cb; + txdesc->callback_param = spfi; + } + + if (xfer->rx_buf) { + spfi->rx_dma_busy = true; + dmaengine_submit(rxdesc); + dma_async_issue_pending(spfi->rx_ch); + } + + if (xfer->tx_buf) { + spfi->tx_dma_busy = true; + dmaengine_submit(txdesc); + dma_async_issue_pending(spfi->tx_ch); + } + + spfi_start(spfi); + + return 1; + +stop_dma: + dmaengine_terminate_all(spfi->rx_ch); + dmaengine_terminate_all(spfi->tx_ch); + return -EIO; +} + +static void img_spfi_config(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct img_spfi *spfi = spi_master_get_devdata(spi->master); + u32 val, div; + + /* + * output = spfi_clk * (BITCLK / 512), where BITCLK must be a + * power of 2 up to 256 (where 255 == 256 since BITCLK is 8 bits) + */ + div = DIV_ROUND_UP(master->max_speed_hz, xfer->speed_hz); + div = clamp(512 / (1 << get_count_order(div)), 1, 255); + + val = spfi_readl(spfi, SPFI_DEVICE_PARAMETER(spi->chip_select)); + val &= ~(SPFI_DEVICE_PARAMETER_BITCLK_MASK << + SPFI_DEVICE_PARAMETER_BITCLK_SHIFT); + val |= div << SPFI_DEVICE_PARAMETER_BITCLK_SHIFT; + spfi_writel(spfi, val, SPFI_DEVICE_PARAMETER(spi->chip_select)); + + val = spfi_readl(spfi, SPFI_CONTROL); + val &= ~(SPFI_CONTROL_SEND_DMA | SPFI_CONTROL_GET_DMA); + if (xfer->tx_buf) + val |= SPFI_CONTROL_SEND_DMA; + if (xfer->rx_buf) + val |= SPFI_CONTROL_GET_DMA; + val &= ~(SPFI_CONTROL_TMODE_MASK << SPFI_CONTROL_TMODE_SHIFT); + if (xfer->tx_nbits == SPI_NBITS_DUAL && + xfer->rx_nbits == SPI_NBITS_DUAL) + val |= SPFI_CONTROL_TMODE_DUAL << SPFI_CONTROL_TMODE_SHIFT; + else if (xfer->tx_nbits == SPI_NBITS_QUAD && + xfer->rx_nbits == SPI_NBITS_QUAD) + val |= SPFI_CONTROL_TMODE_QUAD << SPFI_CONTROL_TMODE_SHIFT; + val &= ~SPFI_CONTROL_CONTINUE; + if (!xfer->cs_change && !list_is_last(&xfer->transfer_list, + &master->cur_msg->transfers)) + val |= SPFI_CONTROL_CONTINUE; + spfi_writel(spfi, val, SPFI_CONTROL); + + val = spfi_readl(spfi, SPFI_PORT_STATE); + if (spi->mode & SPI_CPHA) + val |= SPFI_PORT_STATE_CK_PHASE(spi->chip_select); + else + val &= ~SPFI_PORT_STATE_CK_PHASE(spi->chip_select); + if (spi->mode & SPI_CPOL) + val |= SPFI_PORT_STATE_CK_POL(spi->chip_select); + else + val &= ~SPFI_PORT_STATE_CK_POL(spi->chip_select); + spfi_writel(spfi, val, SPFI_PORT_STATE); + + spfi_writel(spfi, xfer->len << SPFI_TRANSACTION_TSIZE_SHIFT, + SPFI_TRANSACTION); +} + +static int img_spfi_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct img_spfi *spfi = spi_master_get_devdata(spi->master); + bool dma_reset = false; + unsigned long flags; + int ret; + + /* + * Stop all DMA and reset the controller if the previous transaction + * timed-out and never completed it's DMA. + */ + spin_lock_irqsave(&spfi->lock, flags); + if (spfi->tx_dma_busy || spfi->rx_dma_busy) { + dev_err(spfi->dev, "SPI DMA still busy\n"); + dma_reset = true; + } + spin_unlock_irqrestore(&spfi->lock, flags); + + if (dma_reset) { + dmaengine_terminate_all(spfi->tx_ch); + dmaengine_terminate_all(spfi->rx_ch); + spfi_reset(spfi); + } + + img_spfi_config(master, spi, xfer); + if (master->can_dma && master->can_dma(master, spi, xfer)) + ret = img_spfi_start_dma(master, spi, xfer); + else + ret = img_spfi_start_pio(master, spi, xfer); + + return ret; +} + +static void img_spfi_set_cs(struct spi_device *spi, bool enable) +{ + struct img_spfi *spfi = spi_master_get_devdata(spi->master); + u32 val; + + val = spfi_readl(spfi, SPFI_PORT_STATE); + val &= ~(SPFI_PORT_STATE_DEV_SEL_MASK << SPFI_PORT_STATE_DEV_SEL_SHIFT); + val |= spi->chip_select << SPFI_PORT_STATE_DEV_SEL_SHIFT; + spfi_writel(spfi, val, SPFI_PORT_STATE); +} + +static bool img_spfi_can_dma(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *xfer) +{ + if (xfer->bits_per_word == 8 && xfer->len > SPFI_8BIT_FIFO_SIZE) + return true; + if (xfer->bits_per_word == 32 && xfer->len > SPFI_32BIT_FIFO_SIZE) + return true; + return false; +} + +static irqreturn_t img_spfi_irq(int irq, void *dev_id) +{ + struct img_spfi *spfi = (struct img_spfi *)dev_id; + u32 status; + + status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS); + if (status & SPFI_INTERRUPT_IACCESS) { + spfi_writel(spfi, SPFI_INTERRUPT_IACCESS, SPFI_INTERRUPT_CLEAR); + dev_err(spfi->dev, "Illegal access interrupt"); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static int img_spfi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct img_spfi *spfi; + struct resource *res; + int ret; + + master = spi_alloc_master(&pdev->dev, sizeof(*spfi)); + if (!master) + return -ENOMEM; + platform_set_drvdata(pdev, master); + + spfi = spi_master_get_devdata(master); + spfi->dev = &pdev->dev; + spfi->master = master; + spin_lock_init(&spfi->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + spfi->regs = devm_ioremap_resource(spfi->dev, res); + if (IS_ERR(spfi->regs)) { + ret = PTR_ERR(spfi->regs); + goto put_spi; + } + spfi->phys = res->start; + + spfi->irq = platform_get_irq(pdev, 0); + if (spfi->irq < 0) { + ret = spfi->irq; + goto put_spi; + } + ret = devm_request_irq(spfi->dev, spfi->irq, img_spfi_irq, + IRQ_TYPE_LEVEL_HIGH, dev_name(spfi->dev), spfi); + if (ret) + goto put_spi; + + spfi->sys_clk = devm_clk_get(spfi->dev, "sys"); + if (IS_ERR(spfi->sys_clk)) { + ret = PTR_ERR(spfi->sys_clk); + goto put_spi; + } + spfi->spfi_clk = devm_clk_get(spfi->dev, "spfi"); + if (IS_ERR(spfi->spfi_clk)) { + ret = PTR_ERR(spfi->spfi_clk); + goto put_spi; + } + + ret = clk_prepare_enable(spfi->sys_clk); + if (ret) + goto put_spi; + ret = clk_prepare_enable(spfi->spfi_clk); + if (ret) + goto disable_pclk; + + spfi_reset(spfi); + /* + * Only enable the error (IACCESS) interrupt. In PIO mode we'll + * poll the status of the FIFOs. + */ + spfi_writel(spfi, SPFI_INTERRUPT_IACCESS, SPFI_INTERRUPT_ENABLE); + + master->auto_runtime_pm = true; + master->bus_num = pdev->id; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_DUAL | SPI_RX_DUAL; + if (of_property_read_bool(spfi->dev->of_node, "img,supports-quad-mode")) + master->mode_bits |= SPI_TX_QUAD | SPI_RX_QUAD; + master->num_chipselect = 5; + master->dev.of_node = pdev->dev.of_node; + master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(8); + master->max_speed_hz = clk_get_rate(spfi->spfi_clk); + master->min_speed_hz = master->max_speed_hz / 512; + + master->set_cs = img_spfi_set_cs; + master->transfer_one = img_spfi_transfer_one; + + spfi->tx_ch = dma_request_slave_channel(spfi->dev, "tx"); + spfi->rx_ch = dma_request_slave_channel(spfi->dev, "rx"); + if (!spfi->tx_ch || !spfi->rx_ch) { + if (spfi->tx_ch) + dma_release_channel(spfi->tx_ch); + if (spfi->rx_ch) + dma_release_channel(spfi->rx_ch); + dev_warn(spfi->dev, "Failed to get DMA channels, falling back to PIO mode\n"); + } else { + master->dma_tx = spfi->tx_ch; + master->dma_rx = spfi->rx_ch; + master->can_dma = img_spfi_can_dma; + } + + pm_runtime_set_active(spfi->dev); + pm_runtime_enable(spfi->dev); + + ret = devm_spi_register_master(spfi->dev, master); + if (ret) + goto disable_pm; + + return 0; + +disable_pm: + pm_runtime_disable(spfi->dev); + if (spfi->rx_ch) + dma_release_channel(spfi->rx_ch); + if (spfi->tx_ch) + dma_release_channel(spfi->tx_ch); + clk_disable_unprepare(spfi->spfi_clk); +disable_pclk: + clk_disable_unprepare(spfi->sys_clk); +put_spi: + spi_master_put(master); + + return ret; +} + +static int img_spfi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct img_spfi *spfi = spi_master_get_devdata(master); + + if (spfi->tx_ch) + dma_release_channel(spfi->tx_ch); + if (spfi->rx_ch) + dma_release_channel(spfi->rx_ch); + + pm_runtime_disable(spfi->dev); + if (!pm_runtime_status_suspended(spfi->dev)) { + clk_disable_unprepare(spfi->spfi_clk); + clk_disable_unprepare(spfi->sys_clk); + } + + spi_master_put(master); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME +static int img_spfi_runtime_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct img_spfi *spfi = spi_master_get_devdata(master); + + clk_disable_unprepare(spfi->spfi_clk); + clk_disable_unprepare(spfi->sys_clk); + + return 0; +} + +static int img_spfi_runtime_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct img_spfi *spfi = spi_master_get_devdata(master); + int ret; + + ret = clk_prepare_enable(spfi->sys_clk); + if (ret) + return ret; + ret = clk_prepare_enable(spfi->spfi_clk); + if (ret) { + clk_disable_unprepare(spfi->sys_clk); + return ret; + } + + return 0; +} +#endif /* CONFIG_PM_RUNTIME */ + +#ifdef CONFIG_PM_SLEEP +static int img_spfi_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + + return spi_master_suspend(master); +} + +static int img_spfi_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct img_spfi *spfi = spi_master_get_devdata(master); + int ret; + + ret = pm_runtime_get_sync(dev); + if (ret) + return ret; + spfi_reset(spfi); + pm_runtime_put(dev); + + return spi_master_resume(master); +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops img_spfi_pm_ops = { + SET_RUNTIME_PM_OPS(img_spfi_runtime_suspend, img_spfi_runtime_resume, + NULL) + SET_SYSTEM_SLEEP_PM_OPS(img_spfi_suspend, img_spfi_resume) +}; + +static const struct of_device_id img_spfi_of_match[] = { + { .compatible = "img,spfi", }, + { }, +}; +MODULE_DEVICE_TABLE(of, img_spfi_of_match); + +static struct platform_driver img_spfi_driver = { + .driver = { + .name = "img-spfi", + .pm = &img_spfi_pm_ops, + .of_match_table = of_match_ptr(img_spfi_of_match), + }, + .probe = img_spfi_probe, + .remove = img_spfi_remove, +}; +module_platform_driver(img_spfi_driver); + +MODULE_DESCRIPTION("IMG SPFI controller driver"); +MODULE_AUTHOR("Andrew Bresticker "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From fcc50e5cd2deb8316d19e446d8efdfc9b35646ef Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 17 Nov 2014 23:17:03 +0800 Subject: spi: sirf: assign spi_master's max_speed_hz member if spi device has no frequency, spi core will setup the default frequency to max_speed_hz of spi_master according to int spi_setup(struct spi_device *spi) { ... if (!spi->max_speed_hz) spi->max_speed_hz = spi->master->max_speed_hz; ... } this patch moves CSR SiRFSoC SPI frequency set to follow SPI core behaviour. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 39e2c0a55a28..bf3c6bc77530 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -134,6 +134,7 @@ ALIGNED(x->len) && (x->len < 2 * PAGE_SIZE)) #define SIRFSOC_MAX_CMD_BYTES 4 +#define SIRFSOC_SPI_DEFAULT_FRQ 1000000 struct sirfsoc_spi { struct spi_bitbang bitbang; @@ -629,9 +630,6 @@ static int spi_sirfsoc_setup(struct spi_device *spi) { struct sirfsoc_spi *sspi; - if (!spi->max_speed_hz) - return -EINVAL; - sspi = spi_master_get_devdata(spi->master); if (spi->cs_gpio == -ENOENT) @@ -683,6 +681,7 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH; master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(12) | SPI_BPW_MASK(16) | SPI_BPW_MASK(32); + master->max_speed_hz = SIRFSOC_SPI_DEFAULT_FRQ; sspi->bitbang.master->dev.of_node = pdev->dev.of_node; /* request DMA channels */ -- cgit v1.2.3 From 8509c55fcb5192b7f70ec596a8752c2ec39942e3 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Thu, 20 Nov 2014 22:33:07 +0800 Subject: spi: sirf: reset SPI controller in init stage in SPI boot mode, romcode uses SPI controller to fetch data from NOR flash. Here we need to reset the hardware IP to restore its state. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index bf3c6bc77530..0a96a65f580f 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -23,6 +23,7 @@ #include #include #include +#include #define DRIVER_NAME "sirfsoc_spi" @@ -647,6 +648,12 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) int irq; int i, ret; + ret = device_reset(&pdev->dev); + if (ret) { + dev_err(&pdev->dev, "SPI reset failed!\n"); + return ret; + } + master = spi_alloc_master(&pdev->dev, sizeof(*sspi)); if (!master) { dev_err(&pdev->dev, "Unable to allocate SPI master\n"); -- cgit v1.2.3 From 194ed900cac2070175c6e6bf6d23e6bb7400a0f2 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Thu, 20 Nov 2014 17:24:17 +0100 Subject: spi: fsl-spi: Don't use cpm_command on CPM1 On CPM1, when the SPI parameter RAM is relocated to somewhere else than the default location, in accordance with freescale documentation (refer micropatch SPI application note EB662), init RX/TX params command shall not be used because it doesn't take into account the new location, and overwrites data that is in original location of SPI param ram at addresses SCC2 param base + (u32*)0x88 (u16*)0x90 (u32*)0x98 (u16*)0xA0, hence breaking activity on SCC2 if SCC2 is used in a mode like QMC for instance. Therefore, the action shall be done manually as described by freescale and as was already partly done by the driver. Reported-by: Patrick Vasseur Signed-off-by: Christophe Leroy Tested-by: Patrick Vasseur Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-cpm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c index c5dd20beee22..e85ab1cb17a2 100644 --- a/drivers/spi/spi-fsl-cpm.c +++ b/drivers/spi/spi-fsl-cpm.c @@ -56,12 +56,15 @@ void fsl_spi_cpm_reinit_txrx(struct mpc8xxx_spi *mspi) qe_issue_cmd(QE_INIT_TX_RX, mspi->subblock, QE_CR_PROTOCOL_UNSPECIFIED, 0); } else { - cpm_command(CPM_SPI_CMD, CPM_CR_INIT_TRX); if (mspi->flags & SPI_CPM1) { + out_be32(&mspi->pram->rstate, 0); out_be16(&mspi->pram->rbptr, in_be16(&mspi->pram->rbase)); + out_be32(&mspi->pram->tstate, 0); out_be16(&mspi->pram->tbptr, in_be16(&mspi->pram->tbase)); + } else { + cpm_command(CPM_SPI_CMD, CPM_CR_INIT_TRX); } } } -- cgit v1.2.3 From c3e4bc5434d2999ec3b00eadd1945eadf13fd0de Mon Sep 17 00:00:00 2001 From: Beniamino Galvani Date: Sat, 22 Nov 2014 16:21:41 +0100 Subject: spi: meson: Add support for Amlogic Meson SPIFC This is a driver for the Amlogic Meson SPIFC (SPI flash controller), which is one of the two SPI controllers available on the SoC. It doesn't support DMA and has a 64-byte unified transmit/receive buffer. The device is optimized for interfacing with SPI NOR memories and allows the execution of standard operations such as read, page program, sector erase, etc. in a simplified way, toggling a bit in a dedicated register. The driver doesn't use those predefined commands and relies only on custom transfers. Signed-off-by: Beniamino Galvani Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi-meson-spifc.c | 462 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 470 insertions(+) create mode 100644 drivers/spi/spi-meson-spifc.c (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 84e7c9e6ccef..70f20b99e5ff 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -301,6 +301,13 @@ config SPI_FSL_ESPI From MPC8536, 85xx platform uses the controller, and all P10xx, P20xx, P30xx,P40xx, P50xx uses this controller. +config SPI_MESON_SPIFC + tristate "Amlogic Meson SPIFC controller" + depends on ARCH_MESON || COMPILE_TEST + help + This enables master mode support for the SPIFC (SPI flash + controller) available in Amlogic Meson SoCs. + config SPI_OC_TINY tristate "OpenCores tiny SPI" depends on GPIOLIB diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 78f24ca36fcf..9b8a7472b5b8 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o obj-$(CONFIG_SPI_GPIO) += spi-gpio.o obj-$(CONFIG_SPI_IMX) += spi-imx.o obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o +obj-$(CONFIG_SPI_MESON_SPIFC) += spi-meson-spifc.o obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o diff --git a/drivers/spi/spi-meson-spifc.c b/drivers/spi/spi-meson-spifc.c new file mode 100644 index 000000000000..f536476710ad --- /dev/null +++ b/drivers/spi/spi-meson-spifc.c @@ -0,0 +1,462 @@ +/* + * Driver for Amlogic Meson SPI flash controller (SPIFC) + * + * Copyright (C) 2014 Beniamino Galvani + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* register map */ +#define REG_CMD 0x00 +#define REG_ADDR 0x04 +#define REG_CTRL 0x08 +#define REG_CTRL1 0x0c +#define REG_STATUS 0x10 +#define REG_CTRL2 0x14 +#define REG_CLOCK 0x18 +#define REG_USER 0x1c +#define REG_USER1 0x20 +#define REG_USER2 0x24 +#define REG_USER3 0x28 +#define REG_USER4 0x2c +#define REG_SLAVE 0x30 +#define REG_SLAVE1 0x34 +#define REG_SLAVE2 0x38 +#define REG_SLAVE3 0x3c +#define REG_C0 0x40 +#define REG_B8 0x60 +#define REG_MAX 0x7c + +/* register fields */ +#define CMD_USER BIT(18) +#define CTRL_ENABLE_AHB BIT(17) +#define CLOCK_SOURCE BIT(31) +#define CLOCK_DIV_SHIFT 12 +#define CLOCK_DIV_MASK (0x3f << CLOCK_DIV_SHIFT) +#define CLOCK_CNT_HIGH_SHIFT 6 +#define CLOCK_CNT_HIGH_MASK (0x3f << CLOCK_CNT_HIGH_SHIFT) +#define CLOCK_CNT_LOW_SHIFT 0 +#define CLOCK_CNT_LOW_MASK (0x3f << CLOCK_CNT_LOW_SHIFT) +#define USER_DIN_EN_MS BIT(0) +#define USER_CMP_MODE BIT(2) +#define USER_UC_DOUT_SEL BIT(27) +#define USER_UC_DIN_SEL BIT(28) +#define USER_UC_MASK ((BIT(5) - 1) << 27) +#define USER1_BN_UC_DOUT_SHIFT 17 +#define USER1_BN_UC_DOUT_MASK (0xff << 16) +#define USER1_BN_UC_DIN_SHIFT 8 +#define USER1_BN_UC_DIN_MASK (0xff << 8) +#define USER4_CS_ACT BIT(30) +#define SLAVE_TRST_DONE BIT(4) +#define SLAVE_OP_MODE BIT(30) +#define SLAVE_SW_RST BIT(31) + +#define SPIFC_BUFFER_SIZE 64 + +/** + * struct meson_spifc + * @master: the SPI master + * @regmap: regmap for device registers + * @clk: input clock of the built-in baud rate generator + * @device: the device structure + */ +struct meson_spifc { + struct spi_master *master; + struct regmap *regmap; + struct clk *clk; + struct device *dev; +}; + +static struct regmap_config spifc_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = REG_MAX, +}; + +/** + * meson_spifc_wait_ready() - wait for the current operation to terminate + * @spifc: the Meson SPI device + * Return: 0 on success, a negative value on error + */ +static int meson_spifc_wait_ready(struct meson_spifc *spifc) +{ + unsigned long deadline = jiffies + msecs_to_jiffies(5); + u32 data; + + do { + regmap_read(spifc->regmap, REG_SLAVE, &data); + if (data & SLAVE_TRST_DONE) + return 0; + cond_resched(); + } while (!time_after(jiffies, deadline)); + + return -ETIMEDOUT; +} + +/** + * meson_spifc_drain_buffer() - copy data from device buffer to memory + * @spifc: the Meson SPI device + * @buf: the destination buffer + * @len: number of bytes to copy + */ +static void meson_spifc_drain_buffer(struct meson_spifc *spifc, u8 *buf, + int len) +{ + u32 data; + int i = 0; + + while (i < len) { + regmap_read(spifc->regmap, REG_C0 + i, &data); + + if (len - i >= 4) { + *((u32 *)buf) = data; + buf += 4; + } else { + memcpy(buf, &data, len - i); + break; + } + i += 4; + } +} + +/** + * meson_spifc_fill_buffer() - copy data from memory to device buffer + * @spifc: the Meson SPI device + * @buf: the source buffer + * @len: number of bytes to copy + */ +static void meson_spifc_fill_buffer(struct meson_spifc *spifc, const u8 *buf, + int len) +{ + u32 data; + int i = 0; + + while (i < len) { + if (len - i >= 4) + data = *(u32 *)buf; + else + memcpy(&data, buf, len - i); + + regmap_write(spifc->regmap, REG_C0 + i, data); + + buf += 4; + i += 4; + } +} + +/** + * meson_spifc_setup_speed() - program the clock divider + * @spifc: the Meson SPI device + * @speed: desired speed in Hz + */ +void meson_spifc_setup_speed(struct meson_spifc *spifc, u32 speed) +{ + unsigned long parent, value; + int n; + + parent = clk_get_rate(spifc->clk); + n = max_t(int, parent / speed - 1, 1); + + dev_dbg(spifc->dev, "parent %lu, speed %u, n %d\n", parent, + speed, n); + + value = (n << CLOCK_DIV_SHIFT) & CLOCK_DIV_MASK; + value |= (n << CLOCK_CNT_LOW_SHIFT) & CLOCK_CNT_LOW_MASK; + value |= (((n + 1) / 2 - 1) << CLOCK_CNT_HIGH_SHIFT) & + CLOCK_CNT_HIGH_MASK; + + regmap_write(spifc->regmap, REG_CLOCK, value); +} + +/** + * meson_spifc_txrx() - transfer a chunk of data + * @spifc: the Meson SPI device + * @xfer: the current SPI transfer + * @offset: offset of the data to transfer + * @len: length of the data to transfer + * @last_xfer: whether this is the last transfer of the message + * @last_chunk: whether this is the last chunk of the transfer + * Return: 0 on success, a negative value on error + */ +static int meson_spifc_txrx(struct meson_spifc *spifc, + struct spi_transfer *xfer, + int offset, int len, bool last_xfer, + bool last_chunk) +{ + bool keep_cs = true; + int ret; + + if (xfer->tx_buf) + meson_spifc_fill_buffer(spifc, xfer->tx_buf + offset, len); + + /* enable DOUT stage */ + regmap_update_bits(spifc->regmap, REG_USER, USER_UC_MASK, + USER_UC_DOUT_SEL); + regmap_write(spifc->regmap, REG_USER1, + (8 * len - 1) << USER1_BN_UC_DOUT_SHIFT); + + /* enable data input during DOUT */ + regmap_update_bits(spifc->regmap, REG_USER, USER_DIN_EN_MS, + USER_DIN_EN_MS); + + if (last_chunk) { + if (last_xfer) + keep_cs = xfer->cs_change; + else + keep_cs = !xfer->cs_change; + } + + regmap_update_bits(spifc->regmap, REG_USER4, USER4_CS_ACT, + keep_cs ? USER4_CS_ACT : 0); + + /* clear transition done bit */ + regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_TRST_DONE, 0); + /* start transfer */ + regmap_update_bits(spifc->regmap, REG_CMD, CMD_USER, CMD_USER); + + ret = meson_spifc_wait_ready(spifc); + + if (!ret && xfer->rx_buf) + meson_spifc_drain_buffer(spifc, xfer->rx_buf + offset, len); + + return ret; +} + +/** + * meson_spifc_transfer_one() - perform a single transfer + * @master: the SPI master + * @spi: the SPI device + * @xfer: the current SPI transfer + * Return: 0 on success, a negative value on error + */ +static int meson_spifc_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct meson_spifc *spifc = spi_master_get_devdata(master); + int len, done = 0, ret = 0; + + meson_spifc_setup_speed(spifc, xfer->speed_hz); + + regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB, 0); + + while (done < xfer->len && !ret) { + len = min_t(int, xfer->len - done, SPIFC_BUFFER_SIZE); + ret = meson_spifc_txrx(spifc, xfer, done, len, + spi_transfer_is_last(master, xfer), + done + len >= xfer->len); + done += len; + } + + regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB, + CTRL_ENABLE_AHB); + + return ret; +} + +/** + * meson_spifc_hw_init() - reset and initialize the SPI controller + * @spifc: the Meson SPI device + */ +static void meson_spifc_hw_init(struct meson_spifc *spifc) +{ + /* reset device */ + regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_SW_RST, + SLAVE_SW_RST); + /* disable compatible mode */ + regmap_update_bits(spifc->regmap, REG_USER, USER_CMP_MODE, 0); + /* set master mode */ + regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_OP_MODE, 0); +} + +static int meson_spifc_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct meson_spifc *spifc; + struct resource *res; + void __iomem *base; + unsigned int rate; + int ret = 0; + + master = spi_alloc_master(&pdev->dev, sizeof(struct meson_spifc)); + if (!master) + return -ENOMEM; + + platform_set_drvdata(pdev, master); + + spifc = spi_master_get_devdata(master); + spifc->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(spifc->dev, res); + if (IS_ERR(base)) { + ret = PTR_ERR(base); + goto out_err; + } + + spifc->regmap = devm_regmap_init_mmio(spifc->dev, base, + &spifc_regmap_config); + if (IS_ERR(spifc->regmap)) { + ret = PTR_ERR(spifc->regmap); + goto out_err; + } + + spifc->clk = devm_clk_get(spifc->dev, NULL); + if (IS_ERR(spifc->clk)) { + dev_err(spifc->dev, "missing clock\n"); + ret = PTR_ERR(spifc->clk); + goto out_err; + } + + ret = clk_prepare_enable(spifc->clk); + if (ret) { + dev_err(spifc->dev, "can't prepare clock\n"); + goto out_err; + } + + rate = clk_get_rate(spifc->clk); + + master->num_chipselect = 1; + master->dev.of_node = pdev->dev.of_node; + master->bits_per_word_mask = SPI_BPW_MASK(8); + master->auto_runtime_pm = true; + master->transfer_one = meson_spifc_transfer_one; + master->min_speed_hz = rate >> 6; + master->max_speed_hz = rate >> 1; + + meson_spifc_hw_init(spifc); + + pm_runtime_set_active(spifc->dev); + pm_runtime_enable(spifc->dev); + + ret = devm_spi_register_master(spifc->dev, master); + if (ret) { + dev_err(spifc->dev, "failed to register spi master\n"); + goto out_clk; + } + + return 0; +out_clk: + clk_disable_unprepare(spifc->clk); +out_err: + spi_master_put(master); + return ret; +} + +static int meson_spifc_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct meson_spifc *spifc = spi_master_get_devdata(master); + + pm_runtime_get_sync(&pdev->dev); + clk_disable_unprepare(spifc->clk); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int meson_spifc_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct meson_spifc *spifc = spi_master_get_devdata(master); + int ret; + + ret = spi_master_suspend(master); + if (ret) + return ret; + + if (!pm_runtime_suspended(dev)) + clk_disable_unprepare(spifc->clk); + + return 0; +} + +static int meson_spifc_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct meson_spifc *spifc = spi_master_get_devdata(master); + int ret; + + if (!pm_runtime_suspended(dev)) { + ret = clk_prepare_enable(spifc->clk); + if (ret) + return ret; + } + + meson_spifc_hw_init(spifc); + + ret = spi_master_resume(master); + if (ret) + clk_disable_unprepare(spifc->clk); + + return ret; +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM_RUNTIME +static int meson_spifc_runtime_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct meson_spifc *spifc = spi_master_get_devdata(master); + + clk_disable_unprepare(spifc->clk); + + return 0; +} + +static int meson_spifc_runtime_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct meson_spifc *spifc = spi_master_get_devdata(master); + + return clk_prepare_enable(spifc->clk); +} +#endif /* CONFIG_PM_RUNTIME */ + +static const struct dev_pm_ops meson_spifc_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(meson_spifc_suspend, meson_spifc_resume) + SET_RUNTIME_PM_OPS(meson_spifc_runtime_suspend, + meson_spifc_runtime_resume, + NULL) +}; + +static const struct of_device_id meson_spifc_dt_match[] = { + { .compatible = "amlogic,meson6-spifc", }, + { }, +}; + +static struct platform_driver meson_spifc_driver = { + .probe = meson_spifc_probe, + .remove = meson_spifc_remove, + .driver = { + .name = "meson-spifc", + .of_match_table = of_match_ptr(meson_spifc_dt_match), + .pm = &meson_spifc_pm_ops, + }, +}; + +module_platform_driver(meson_spifc_driver); + +MODULE_AUTHOR("Beniamino Galvani "); +MODULE_DESCRIPTION("Amlogic Meson SPIFC driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 7758e390699fb25bf91642d52734200db38e764b Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 14 Nov 2014 17:12:53 +0100 Subject: spi: atmel: remove compat for non DT board when requesting dma chan All boards with a dma controller have DT support so using dma_request_slave_channel_compat is no more needed. Signed-off-by: Ludovic Desroches Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 25 ++----------------------- 1 file changed, 2 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 6ed18934dffe..3370a3dfd883 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -417,23 +417,6 @@ static int atmel_spi_dma_slave_config(struct atmel_spi *as, return err; } -static bool filter(struct dma_chan *chan, void *pdata) -{ - struct atmel_spi_dma *sl_pdata = pdata; - struct at_dma_slave *sl; - - if (!sl_pdata) - return false; - - sl = &sl_pdata->dma_slave; - if (sl->dma_dev == chan->device->dev) { - chan->private = sl; - return true; - } else { - return false; - } -} - static int atmel_spi_configure_dma(struct atmel_spi *as) { struct dma_slave_config slave_config; @@ -444,9 +427,7 @@ static int atmel_spi_configure_dma(struct atmel_spi *as) dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - as->dma.chan_tx = dma_request_slave_channel_compat(mask, filter, - &as->dma, - dev, "tx"); + as->dma.chan_tx = dma_request_slave_channel(dev, "tx"); if (!as->dma.chan_tx) { dev_err(dev, "DMA TX channel not available, SPI unable to use DMA\n"); @@ -454,9 +435,7 @@ static int atmel_spi_configure_dma(struct atmel_spi *as) goto error; } - as->dma.chan_rx = dma_request_slave_channel_compat(mask, filter, - &as->dma, - dev, "rx"); + as->dma.chan_rx = dma_request_slave_channel(dev, "rx"); if (!as->dma.chan_rx) { dev_err(dev, -- cgit v1.2.3 From 5e9af37e46bceea9f950d2f2ae769f1aa6b6d7a6 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 14 Nov 2014 17:12:54 +0100 Subject: spi: atmel: introduce probe deferring Return probe defer if requesting a dma channel without a dma controller probed. Signed-off-by: Ludovic Desroches Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 3370a3dfd883..e4193ccc4970 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -427,14 +427,23 @@ static int atmel_spi_configure_dma(struct atmel_spi *as) dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - as->dma.chan_tx = dma_request_slave_channel(dev, "tx"); - if (!as->dma.chan_tx) { + as->dma.chan_tx = dma_request_slave_channel_reason(dev, "tx"); + if (IS_ERR(as->dma.chan_tx)) { + err = PTR_ERR(as->dma.chan_tx); + if (err == -EPROBE_DEFER) { + dev_warn(dev, "no DMA channel available at the moment\n"); + return err; + } dev_err(dev, "DMA TX channel not available, SPI unable to use DMA\n"); err = -EBUSY; goto error; } + /* + * No reason to check EPROBE_DEFER here since we have already requested + * tx channel. If it fails here, it's for another reason. + */ as->dma.chan_rx = dma_request_slave_channel(dev, "rx"); if (!as->dma.chan_rx) { @@ -456,7 +465,7 @@ static int atmel_spi_configure_dma(struct atmel_spi *as) error: if (as->dma.chan_rx) dma_release_channel(as->dma.chan_rx); - if (as->dma.chan_tx) + if (!IS_ERR(as->dma.chan_tx)) dma_release_channel(as->dma.chan_tx); return err; } @@ -1328,8 +1337,11 @@ static int atmel_spi_probe(struct platform_device *pdev) as->use_dma = false; as->use_pdc = false; if (as->caps.has_dma_support) { - if (atmel_spi_configure_dma(as) == 0) + ret = atmel_spi_configure_dma(as); + if (ret == 0) as->use_dma = true; + else if (ret == -EPROBE_DEFER) + return ret; } else { as->use_pdc = true; } -- cgit v1.2.3 From 9e8987acf051e48fc0e228b6f38c47a75352c58b Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 17 Nov 2014 09:14:32 +0000 Subject: spi: spi-mxs: Fix mapping from vmalloc-ed buffer to scatter list We can only use page_address on memory that has been mapped using kmap, when the buffer passed to the SPI has been allocated by vmalloc the page has not necessarily been mapped through kmap. This means sometimes page_address will return NULL causing the pointer we pass to sg_init_one to be invalid. Currently, this issue doesn't show up on the MXS architecture as the defconfig defines CONFIG_HIGHMEM=n which means all pages are mapped. For the sake of robustness though it is best to correct the issue. As we only call page_address so that we can pass a virtual address to sg_init_one which will eventually call virt_to_page on it, fix this by calling sg_set_page directly rather then relying on the sg_init_one helper. Note this patch is only build tested as I don't have an MXS system to test on. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- drivers/spi/spi-mxs.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index a9e72f9d385e..06a11546a1a7 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -182,7 +182,6 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, int min, ret; u32 ctrl0; struct page *vm_page; - void *sg_buf; struct { u32 pio[4]; struct scatterlist sg; @@ -232,13 +231,14 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, ret = -ENOMEM; goto err_vmalloc; } - sg_buf = page_address(vm_page) + - ((size_t)buf & ~PAGE_MASK); + + sg_init_table(&dma_xfer[sg_count].sg, 1); + sg_set_page(&dma_xfer[sg_count].sg, vm_page, + min, offset_in_page(buf)); } else { - sg_buf = buf; + sg_init_one(&dma_xfer[sg_count].sg, buf, min); } - sg_init_one(&dma_xfer[sg_count].sg, sg_buf, min); ret = dma_map_sg(ssp->dev, &dma_xfer[sg_count].sg, 1, (flags & TXRX_WRITE) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); -- cgit v1.2.3 From 4fdb2424cc4499237197a8c9d35b34d68c750475 Mon Sep 17 00:00:00 2001 From: Weike Chen Date: Wed, 8 Oct 2014 08:50:22 -0700 Subject: spi: spi-pxa2xx: Add helpers for regiseters' accessing There are several registers for SPI, and the registers of 'SSCR0' and 'SSCR1' are accessed frequently. This path is to introduce helper functions to simplify the accessing of 'SSCR0' and 'SSCR1'. Reviewed-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Weike Chen Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 107 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 84 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 9e9e0f971e6c..d4d29c594156 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -80,6 +80,73 @@ static bool is_lpss_ssp(const struct driver_data *drv_data) return drv_data->ssp_type == LPSS_SSP; } +static u32 pxa2xx_spi_get_ssrc1_change_mask(const struct driver_data *drv_data) +{ + switch (drv_data->ssp_type) { + default: + return SSCR1_CHANGE_MASK; + } +} + +static u32 +pxa2xx_spi_get_rx_default_thre(const struct driver_data *drv_data) +{ + switch (drv_data->ssp_type) { + default: + return RX_THRESH_DFLT; + } +} + +static bool pxa2xx_spi_txfifo_full(const struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + u32 mask; + + switch (drv_data->ssp_type) { + default: + mask = SSSR_TFL_MASK; + break; + } + + return (read_SSSR(reg) & mask) == mask; +} + +static void pxa2xx_spi_clear_rx_thre(const struct driver_data *drv_data, + u32 *sccr1_reg) +{ + u32 mask; + + switch (drv_data->ssp_type) { + default: + mask = SSCR1_RFT; + break; + } + *sccr1_reg &= ~mask; +} + +static void pxa2xx_spi_set_rx_thre(const struct driver_data *drv_data, + u32 *sccr1_reg, u32 threshold) +{ + switch (drv_data->ssp_type) { + default: + *sccr1_reg |= SSCR1_RxTresh(threshold); + break; + } +} + +static u32 pxa2xx_configure_sscr0(const struct driver_data *drv_data, + u32 clk_div, u8 bits) +{ + switch (drv_data->ssp_type) { + default: + return clk_div + | SSCR0_Motorola + | SSCR0_DataSize(bits > 16 ? bits - 16 : bits) + | SSCR0_SSE + | (bits > 16 ? SSCR0_EDSS : 0); + } +} + /* * Read and write LPSS SSP private registers. Caller must first check that * is_lpss_ssp() returns true before these can be called. @@ -234,7 +301,7 @@ static int null_writer(struct driver_data *drv_data) void __iomem *reg = drv_data->ioaddr; u8 n_bytes = drv_data->n_bytes; - if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) + if (pxa2xx_spi_txfifo_full(drv_data) || (drv_data->tx == drv_data->tx_end)) return 0; @@ -262,7 +329,7 @@ static int u8_writer(struct driver_data *drv_data) { void __iomem *reg = drv_data->ioaddr; - if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) + if (pxa2xx_spi_txfifo_full(drv_data) || (drv_data->tx == drv_data->tx_end)) return 0; @@ -289,7 +356,7 @@ static int u16_writer(struct driver_data *drv_data) { void __iomem *reg = drv_data->ioaddr; - if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) + if (pxa2xx_spi_txfifo_full(drv_data) || (drv_data->tx == drv_data->tx_end)) return 0; @@ -316,7 +383,7 @@ static int u32_writer(struct driver_data *drv_data) { void __iomem *reg = drv_data->ioaddr; - if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) + if (pxa2xx_spi_txfifo_full(drv_data) || (drv_data->tx == drv_data->tx_end)) return 0; @@ -508,8 +575,9 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data) * remaining RX bytes. */ if (pxa25x_ssp_comp(drv_data)) { + u32 rx_thre; - sccr1_reg &= ~SSCR1_RFT; + pxa2xx_spi_clear_rx_thre(drv_data, &sccr1_reg); bytes_left = drv_data->rx_end - drv_data->rx; switch (drv_data->n_bytes) { @@ -519,10 +587,11 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data) bytes_left >>= 1; } - if (bytes_left > RX_THRESH_DFLT) - bytes_left = RX_THRESH_DFLT; + rx_thre = pxa2xx_spi_get_rx_default_thre(drv_data); + if (rx_thre > bytes_left) + rx_thre = bytes_left; - sccr1_reg |= SSCR1_RxTresh(bytes_left); + pxa2xx_spi_set_rx_thre(drv_data, &sccr1_reg, rx_thre); } write_SSCR1(sccr1_reg, reg); } @@ -613,6 +682,7 @@ static void pump_transfers(unsigned long data) u32 cr1; u32 dma_thresh = drv_data->cur_chip->dma_threshold; u32 dma_burst = drv_data->cur_chip->dma_burst_size; + u32 change_mask = pxa2xx_spi_get_ssrc1_change_mask(drv_data); /* Get current state information */ message = drv_data->cur_msg; @@ -731,11 +801,7 @@ static void pump_transfers(unsigned long data) "pump_transfers: DMA burst size reduced to match bits_per_word\n"); } - cr0 = clk_div - | SSCR0_Motorola - | SSCR0_DataSize(bits > 16 ? bits - 16 : bits) - | SSCR0_SSE - | (bits > 16 ? SSCR0_EDSS : 0); + cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, bits); } message->state = RUNNING_STATE; @@ -772,16 +838,15 @@ static void pump_transfers(unsigned long data) } /* see if we need to reload the config registers */ - if ((read_SSCR0(reg) != cr0) - || (read_SSCR1(reg) & SSCR1_CHANGE_MASK) != - (cr1 & SSCR1_CHANGE_MASK)) { + if ((read_SSCR0(reg) != cr0) || + (read_SSCR1(reg) & change_mask) != (cr1 & change_mask)) { /* stop the SSP, and update the other bits */ write_SSCR0(cr0 & ~SSCR0_SSE, reg); if (!pxa25x_ssp_comp(drv_data)) write_SSTO(chip->timeout, reg); /* first set CR1 without interrupt and service enables */ - write_SSCR1(cr1 & SSCR1_CHANGE_MASK, reg); + write_SSCR1(cr1 & change_mask, reg); /* restart the SSP */ write_SSCR0(cr0, reg); @@ -959,12 +1024,8 @@ static int setup(struct spi_device *spi) clk_div = ssp_get_clk_div(drv_data, spi->max_speed_hz); chip->speed_hz = spi->max_speed_hz; - chip->cr0 = clk_div - | SSCR0_Motorola - | SSCR0_DataSize(spi->bits_per_word > 16 ? - spi->bits_per_word - 16 : spi->bits_per_word) - | SSCR0_SSE - | (spi->bits_per_word > 16 ? SSCR0_EDSS : 0); + chip->cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, + spi->bits_per_word); chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH); chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0) | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0); -- cgit v1.2.3 From 008c2a2ef0af9a31a848948034d7d59b37f9a9e1 Mon Sep 17 00:00:00 2001 From: kbuild test robot Date: Tue, 25 Nov 2014 08:36:12 +0800 Subject: spi: meson: meson_spifc_setup_speed() can be static drivers/spi/spi-meson-spifc.c:171:6: sparse: symbol 'meson_spifc_setup_speed' was not declared. Should it be static? Signed-off-by: Fengguang Wu Signed-off-by: Mark Brown --- drivers/spi/spi-meson-spifc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-meson-spifc.c b/drivers/spi/spi-meson-spifc.c index f536476710ad..0e48f8c2037d 100644 --- a/drivers/spi/spi-meson-spifc.c +++ b/drivers/spi/spi-meson-spifc.c @@ -168,7 +168,7 @@ static void meson_spifc_fill_buffer(struct meson_spifc *spifc, const u8 *buf, * @spifc: the Meson SPI device * @speed: desired speed in Hz */ -void meson_spifc_setup_speed(struct meson_spifc *spifc, u32 speed) +static void meson_spifc_setup_speed(struct meson_spifc *spifc, u32 speed) { unsigned long parent, value; int n; -- cgit v1.2.3 From e5262d0568dc9e10de79a726dfd7edb712a2c10b Mon Sep 17 00:00:00 2001 From: Weike Chen Date: Wed, 26 Nov 2014 02:35:10 -0800 Subject: spi: spi-pxa2xx: SPI support for Intel Quark X1000 There are two SPI controllers exported by PCI subsystem for Intel Quark X1000. The SPI memory mapped I/O registers supported by Quark are different from the current implementation, and Quark only supports the registers of 'SSCR0', 'SSCR1', 'SSSR', 'SSDR', and 'DDS_RATE'. This patch is to enable the SPI for Intel Quark X1000. This piece of work is derived from Dan O'Donovan's initial work for Intel Quark X1000 SPI enabling. Reviewed-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Weike Chen Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx-pci.c | 8 ++ drivers/spi/spi-pxa2xx.c | 197 +++++++++++++++++++++++++++++++++++++++---- drivers/spi/spi-pxa2xx.h | 16 ++-- include/linux/pxa2xx_ssp.h | 20 +++++ 4 files changed, 219 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index 6beee8ce2d68..fa7399e84bbb 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -19,6 +19,7 @@ enum { PORT_BSW0, PORT_BSW1, PORT_BSW2, + PORT_QUARK_X1000, }; struct pxa_spi_info { @@ -92,6 +93,12 @@ static struct pxa_spi_info spi_info_configs[] = { .tx_param = &bsw2_tx_param, .rx_param = &bsw2_rx_param, }, + [PORT_QUARK_X1000] = { + .type = QUARK_X1000_SSP, + .port_id = -1, + .num_chipselect = 1, + .max_clk_rate = 50000000, + }, }; static int pxa2xx_spi_pci_probe(struct pci_dev *dev, @@ -191,6 +198,7 @@ static void pxa2xx_spi_pci_remove(struct pci_dev *dev) static const struct pci_device_id pxa2xx_spi_pci_devices[] = { { PCI_VDEVICE(INTEL, 0x2e6a), PORT_CE4100 }, + { PCI_VDEVICE(INTEL, 0x0935), PORT_QUARK_X1000 }, { PCI_VDEVICE(INTEL, 0x0f0e), PORT_BYT }, { PCI_VDEVICE(INTEL, 0x228e), PORT_BSW0 }, { PCI_VDEVICE(INTEL, 0x2290), PORT_BSW1 }, diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index d4d29c594156..1a1df5092aca 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -63,10 +63,64 @@ MODULE_ALIAS("platform:pxa2xx-spi"); | SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \ | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM) +#define QUARK_X1000_SSCR1_CHANGE_MASK (QUARK_X1000_SSCR1_STRF \ + | QUARK_X1000_SSCR1_EFWR \ + | QUARK_X1000_SSCR1_RFT \ + | QUARK_X1000_SSCR1_TFT \ + | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM) + #define LPSS_RX_THRESH_DFLT 64 #define LPSS_TX_LOTHRESH_DFLT 160 #define LPSS_TX_HITHRESH_DFLT 224 +struct quark_spi_rate { + u32 bitrate; + u32 dds_clk_rate; + u32 clk_div; +}; + +/* + * 'rate', 'dds', 'clk_div' lookup table, which is defined in + * the Quark SPI datasheet. + */ +static const struct quark_spi_rate quark_spi_rate_table[] = { +/* bitrate, dds_clk_rate, clk_div */ + {50000000, 0x800000, 0}, + {40000000, 0x666666, 0}, + {25000000, 0x400000, 0}, + {20000000, 0x666666, 1}, + {16667000, 0x800000, 2}, + {13333000, 0x666666, 2}, + {12500000, 0x200000, 0}, + {10000000, 0x800000, 4}, + {8000000, 0x666666, 4}, + {6250000, 0x400000, 3}, + {5000000, 0x400000, 4}, + {4000000, 0x666666, 9}, + {3125000, 0x80000, 0}, + {2500000, 0x400000, 9}, + {2000000, 0x666666, 19}, + {1563000, 0x40000, 0}, + {1250000, 0x200000, 9}, + {1000000, 0x400000, 24}, + {800000, 0x666666, 49}, + {781250, 0x20000, 0}, + {625000, 0x200000, 19}, + {500000, 0x400000, 49}, + {400000, 0x666666, 99}, + {390625, 0x10000, 0}, + {250000, 0x400000, 99}, + {200000, 0x666666, 199}, + {195313, 0x8000, 0}, + {125000, 0x100000, 49}, + {100000, 0x200000, 124}, + {50000, 0x100000, 124}, + {25000, 0x80000, 124}, + {10016, 0x20000, 77}, + {5040, 0x20000, 154}, + {1002, 0x8000, 194}, +}; + /* Offset from drv_data->lpss_base */ #define GENERAL_REG 0x08 #define GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24) @@ -80,9 +134,16 @@ static bool is_lpss_ssp(const struct driver_data *drv_data) return drv_data->ssp_type == LPSS_SSP; } +static bool is_quark_x1000_ssp(const struct driver_data *drv_data) +{ + return drv_data->ssp_type == QUARK_X1000_SSP; +} + static u32 pxa2xx_spi_get_ssrc1_change_mask(const struct driver_data *drv_data) { switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + return QUARK_X1000_SSCR1_CHANGE_MASK; default: return SSCR1_CHANGE_MASK; } @@ -92,6 +153,8 @@ static u32 pxa2xx_spi_get_rx_default_thre(const struct driver_data *drv_data) { switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + return RX_THRESH_QUARK_X1000_DFLT; default: return RX_THRESH_DFLT; } @@ -103,6 +166,9 @@ static bool pxa2xx_spi_txfifo_full(const struct driver_data *drv_data) u32 mask; switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + mask = QUARK_X1000_SSSR_TFL_MASK; + break; default: mask = SSSR_TFL_MASK; break; @@ -117,6 +183,9 @@ static void pxa2xx_spi_clear_rx_thre(const struct driver_data *drv_data, u32 mask; switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + mask = QUARK_X1000_SSCR1_RFT; + break; default: mask = SSCR1_RFT; break; @@ -128,6 +197,9 @@ static void pxa2xx_spi_set_rx_thre(const struct driver_data *drv_data, u32 *sccr1_reg, u32 threshold) { switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + *sccr1_reg |= QUARK_X1000_SSCR1_RxTresh(threshold); + break; default: *sccr1_reg |= SSCR1_RxTresh(threshold); break; @@ -138,6 +210,11 @@ static u32 pxa2xx_configure_sscr0(const struct driver_data *drv_data, u32 clk_div, u8 bits) { switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + return clk_div + | QUARK_X1000_SSCR0_Motorola + | QUARK_X1000_SSCR0_DataSize(bits > 32 ? 8 : bits) + | SSCR0_SSE; default: return clk_div | SSCR0_Motorola @@ -654,6 +731,28 @@ static irqreturn_t ssp_int(int irq, void *dev_id) return drv_data->transfer_handler(drv_data); } +/* + * The Quark SPI data sheet gives a table, and for the given 'rate', + * the 'dds' and 'clk_div' can be found in the table. + */ +static u32 quark_x1000_set_clk_regvals(u32 rate, u32 *dds, u32 *clk_div) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(quark_spi_rate_table); i++) { + if (rate >= quark_spi_rate_table[i].bitrate) { + *dds = quark_spi_rate_table[i].dds_clk_rate; + *clk_div = quark_spi_rate_table[i].clk_div; + return quark_spi_rate_table[i].bitrate; + } + } + + *dds = quark_spi_rate_table[i-1].dds_clk_rate; + *clk_div = quark_spi_rate_table[i-1].clk_div; + + return quark_spi_rate_table[i-1].bitrate; +} + static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate) { unsigned long ssp_clk = drv_data->max_clk_rate; @@ -667,6 +766,20 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate) return ((ssp_clk / rate - 1) & 0xfff) << 8; } +static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data, + struct chip_data *chip, int rate) +{ + u32 clk_div; + + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + quark_x1000_set_clk_regvals(rate, &chip->dds_rate, &clk_div); + return clk_div << 8; + default: + return ssp_get_clk_div(drv_data, rate); + } +} + static void pump_transfers(unsigned long data) { struct driver_data *drv_data = (struct driver_data *)data; @@ -769,7 +882,7 @@ static void pump_transfers(unsigned long data) if (transfer->bits_per_word) bits = transfer->bits_per_word; - clk_div = ssp_get_clk_div(drv_data, speed); + clk_div = pxa2xx_ssp_get_clk_div(drv_data, chip, speed); if (bits <= 8) { drv_data->n_bytes = 1; @@ -837,6 +950,10 @@ static void pump_transfers(unsigned long data) write_SSITF(chip->lpss_tx_threshold, reg); } + if (is_quark_x1000_ssp(drv_data) && + (read_DDS_RATE(reg) != chip->dds_rate)) + write_DDS_RATE(chip->dds_rate, reg); + /* see if we need to reload the config registers */ if ((read_SSCR0(reg) != cr0) || (read_SSCR1(reg) & change_mask) != (cr1 & change_mask)) { @@ -940,14 +1057,22 @@ static int setup(struct spi_device *spi) unsigned int clk_div; uint tx_thres, tx_hi_thres, rx_thres; - if (is_lpss_ssp(drv_data)) { + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + tx_thres = TX_THRESH_QUARK_X1000_DFLT; + tx_hi_thres = 0; + rx_thres = RX_THRESH_QUARK_X1000_DFLT; + break; + case LPSS_SSP: tx_thres = LPSS_TX_LOTHRESH_DFLT; tx_hi_thres = LPSS_TX_HITHRESH_DFLT; rx_thres = LPSS_RX_THRESH_DFLT; - } else { + break; + default: tx_thres = TX_THRESH_DFLT; tx_hi_thres = 0; rx_thres = RX_THRESH_DFLT; + break; } /* Only alloc on first setup */ @@ -1000,9 +1125,6 @@ static int setup(struct spi_device *spi) chip->enable_dma = drv_data->master_info->enable_dma; } - chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) | - (SSCR1_TxTresh(tx_thres) & SSCR1_TFT); - chip->lpss_rx_threshold = SSIRF_RxThresh(rx_thres); chip->lpss_tx_threshold = SSITF_TxLoThresh(tx_thres) | SSITF_TxHiThresh(tx_hi_thres); @@ -1021,11 +1143,24 @@ static int setup(struct spi_device *spi) } } - clk_div = ssp_get_clk_div(drv_data, spi->max_speed_hz); + clk_div = pxa2xx_ssp_get_clk_div(drv_data, chip, spi->max_speed_hz); chip->speed_hz = spi->max_speed_hz; chip->cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, spi->bits_per_word); + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + chip->threshold = (QUARK_X1000_SSCR1_RxTresh(rx_thres) + & QUARK_X1000_SSCR1_RFT) + | (QUARK_X1000_SSCR1_TxTresh(tx_thres) + & QUARK_X1000_SSCR1_TFT); + break; + default: + chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) | + (SSCR1_TxTresh(tx_thres) & SSCR1_TFT); + break; + } + chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH); chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0) | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0); @@ -1054,7 +1189,8 @@ static int setup(struct spi_device *spi) chip->read = u16_reader; chip->write = u16_writer; } else if (spi->bits_per_word <= 32) { - chip->cr0 |= SSCR0_EDSS; + if (!is_quark_x1000_ssp(drv_data)) + chip->cr0 |= SSCR0_EDSS; chip->n_bytes = 4; chip->read = u32_reader; chip->write = u32_writer; @@ -1205,7 +1341,15 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) drv_data->ioaddr = ssp->mmio_base; drv_data->ssdr_physical = ssp->phys_base + SSDR; if (pxa25x_ssp_comp(drv_data)) { - master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); + break; + default: + master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); + break; + } + drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE; drv_data->dma_cr1 = 0; drv_data->clear_sr = SSSR_ROR; @@ -1243,16 +1387,35 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) /* Load default SSP configuration */ write_SSCR0(0, drv_data->ioaddr); - write_SSCR1(SSCR1_RxTresh(RX_THRESH_DFLT) | - SSCR1_TxTresh(TX_THRESH_DFLT), - drv_data->ioaddr); - write_SSCR0(SSCR0_SCR(2) - | SSCR0_Motorola - | SSCR0_DataSize(8), - drv_data->ioaddr); + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + write_SSCR1(QUARK_X1000_SSCR1_RxTresh( + RX_THRESH_QUARK_X1000_DFLT) | + QUARK_X1000_SSCR1_TxTresh( + TX_THRESH_QUARK_X1000_DFLT), + drv_data->ioaddr); + + /* using the Motorola SPI protocol and use 8 bit frame */ + write_SSCR0(QUARK_X1000_SSCR0_Motorola + | QUARK_X1000_SSCR0_DataSize(8), + drv_data->ioaddr); + break; + default: + write_SSCR1(SSCR1_RxTresh(RX_THRESH_DFLT) | + SSCR1_TxTresh(TX_THRESH_DFLT), + drv_data->ioaddr); + write_SSCR0(SSCR0_SCR(2) + | SSCR0_Motorola + | SSCR0_DataSize(8), + drv_data->ioaddr); + break; + } + if (!pxa25x_ssp_comp(drv_data)) write_SSTO(0, drv_data->ioaddr); - write_SSPSP(0, drv_data->ioaddr); + + if (!is_quark_x1000_ssp(drv_data)) + write_SSPSP(0, drv_data->ioaddr); lpss_ssp_setup(drv_data); diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index 5adc2a11c7bc..6bec59c90cd4 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -93,6 +93,7 @@ struct driver_data { struct chip_data { u32 cr0; u32 cr1; + u32 dds_rate; u32 psp; u32 timeout; u8 n_bytes; @@ -126,6 +127,7 @@ DEFINE_SSP_REG(SSCR1, 0x04) DEFINE_SSP_REG(SSSR, 0x08) DEFINE_SSP_REG(SSITR, 0x0c) DEFINE_SSP_REG(SSDR, 0x10) +DEFINE_SSP_REG(DDS_RATE, 0x28) /* DDS Clock Rate */ DEFINE_SSP_REG(SSTO, 0x28) DEFINE_SSP_REG(SSPSP, 0x2c) DEFINE_SSP_REG(SSITF, SSITF) @@ -141,18 +143,22 @@ DEFINE_SSP_REG(SSIRF, SSIRF) static inline int pxa25x_ssp_comp(struct driver_data *drv_data) { - if (drv_data->ssp_type == PXA25x_SSP) + switch (drv_data->ssp_type) { + case PXA25x_SSP: + case CE4100_SSP: + case QUARK_X1000_SSP: return 1; - if (drv_data->ssp_type == CE4100_SSP) - return 1; - return 0; + default: + return 0; + } } static inline void write_SSSR_CS(struct driver_data *drv_data, u32 val) { void __iomem *reg = drv_data->ioaddr; - if (drv_data->ssp_type == CE4100_SSP) + if (drv_data->ssp_type == CE4100_SSP || + drv_data->ssp_type == QUARK_X1000_SSP) val |= read_SSSR(reg) & SSSR_ALT_FRM_MASK; write_SSSR(val, reg); diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index f2b405116166..77aed9ea1d26 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -108,6 +108,25 @@ #define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */ #endif +/* QUARK_X1000 SSCR0 bit definition */ +#define QUARK_X1000_SSCR0_DSS (0x1F) /* Data Size Select (mask) */ +#define QUARK_X1000_SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..32] */ +#define QUARK_X1000_SSCR0_FRF (0x3 << 5) /* FRame Format (mask) */ +#define QUARK_X1000_SSCR0_Motorola (0x0 << 5) /* Motorola's Serial Peripheral Interface (SPI) */ + +#define RX_THRESH_QUARK_X1000_DFLT 1 +#define TX_THRESH_QUARK_X1000_DFLT 16 + +#define QUARK_X1000_SSSR_TFL_MASK (0x1F << 8) /* Transmit FIFO Level mask */ +#define QUARK_X1000_SSSR_RFL_MASK (0x1F << 13) /* Receive FIFO Level mask */ + +#define QUARK_X1000_SSCR1_TFT (0x1F << 6) /* Transmit FIFO Threshold (mask) */ +#define QUARK_X1000_SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..32] */ +#define QUARK_X1000_SSCR1_RFT (0x1F << 11) /* Receive FIFO Threshold (mask) */ +#define QUARK_X1000_SSCR1_RxTresh(x) (((x) - 1) << 11) /* level [1..32] */ +#define QUARK_X1000_SSCR1_STRF (1 << 17) /* Select FIFO or EFWR */ +#define QUARK_X1000_SSCR1_EFWR (1 << 16) /* Enable FIFO Write/Read */ + /* extra bits in PXA255, PXA26x and PXA27x SSP ports */ #define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ #define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ @@ -175,6 +194,7 @@ enum pxa_ssp_type { PXA910_SSP, CE4100_SSP, LPSS_SSP, + QUARK_X1000_SSP, }; struct ssp_device { -- cgit v1.2.3 From bf77cba95f8c06bbf76869d3bdfb03e18a33e673 Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Thu, 6 Nov 2014 15:21:49 +0530 Subject: spi: s3c64xx: add support for exynos7 SPI controller Exynos7 SPI controller supports only the auto Selection of CS toggle mode and Exynos7 SoC includes six SPI controllers. Add support for these changes in Exynos7 SPI controller driver. Signed-off-by: Padmavathi Venna Signed-off-by: Mark Brown --- .../devicetree/bindings/spi/spi-samsung.txt | 2 +- drivers/spi/Kconfig | 2 +- drivers/spi/spi-s3c64xx.c | 32 ++++++++++++++++++---- 3 files changed, 29 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt index 1e8a8578148f..6dbdeb3c361a 100644 --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt +++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt @@ -9,7 +9,7 @@ Required SoC Specific Properties: - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms - samsung,s3c6410-spi: for s3c6410 platforms - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms - - samsung,exynos4210-spi: for exynos4 and exynos5 platforms + - samsung,exynos7-spi: for exynos7 platforms - reg: physical base address of the controller and length of memory mapped region. diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 84e7c9e6ccef..de2d33dea8b8 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -444,7 +444,7 @@ config SPI_S3C24XX_FIQ config SPI_S3C64XX tristate "Samsung S3C64XX series type SPI" - depends on PLAT_SAMSUNG + depends on (PLAT_SAMSUNG || ARCH_EXYNOS) select S3C64XX_PL080 if ARCH_S3C64XX help SPI driver for Samsung S3C64XX and newer SoCs. diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 480133ee1eb3..59e07cf31598 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -33,8 +33,9 @@ #include -#define MAX_SPI_PORTS 3 +#define MAX_SPI_PORTS 6 #define S3C64XX_SPI_QUIRK_POLL (1 << 0) +#define S3C64XX_SPI_QUIRK_CS_AUTO (1 << 1) /* Registers and bit-fields */ @@ -78,6 +79,7 @@ #define S3C64XX_SPI_SLAVE_AUTO (1<<1) #define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0) +#define S3C64XX_SPI_SLAVE_NSC_CNT_2 (2<<4) #define S3C64XX_SPI_INT_TRAILING_EN (1<<6) #define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5) @@ -717,7 +719,12 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master, enable_datapath(sdd, spi, xfer, use_dma); /* Start the signals */ - writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) + writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + else + writel(readl(sdd->regs + S3C64XX_SPI_SLAVE_SEL) + | S3C64XX_SPI_SLAVE_AUTO | S3C64XX_SPI_SLAVE_NSC_CNT_2, + sdd->regs + S3C64XX_SPI_SLAVE_SEL); spin_unlock_irqrestore(&sdd->lock, flags); @@ -866,13 +873,15 @@ static int s3c64xx_spi_setup(struct spi_device *spi) } pm_runtime_put(&sdd->pdev->dev); - writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) + writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); return 0; setup_exit: pm_runtime_put(&sdd->pdev->dev); /* setup() returns with device de-selected */ - writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) + writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); if (gpio_is_valid(spi->cs_gpio)) gpio_free(spi->cs_gpio); @@ -946,7 +955,8 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) sdd->cur_speed = 0; - writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) + writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); /* Disable Interrupts - we use Polling if not DMA mode */ writel(0, regs + S3C64XX_SPI_INT_EN); @@ -1341,6 +1351,15 @@ static struct s3c64xx_spi_port_config exynos5440_spi_port_config = { .quirks = S3C64XX_SPI_QUIRK_POLL, }; +static struct s3c64xx_spi_port_config exynos7_spi_port_config = { + .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F, 0x7F, 0x7F, 0x1ff}, + .rx_lvl_offset = 15, + .tx_st_done = 25, + .high_speed = true, + .clk_from_cmu = true, + .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, +}; + static struct platform_device_id s3c64xx_spi_driver_ids[] = { { .name = "s3c2443-spi", @@ -1374,6 +1393,9 @@ static const struct of_device_id s3c64xx_spi_dt_match[] = { { .compatible = "samsung,exynos5440-spi", .data = (void *)&exynos5440_spi_port_config, }, + { .compatible = "samsung,exynos7-spi", + .data = (void *)&exynos7_spi_port_config, + }, { }, }; MODULE_DEVICE_TABLE(of, s3c64xx_spi_dt_match); -- cgit v1.2.3 From 1327ecd47fe4e36bae6bcda55b3282c08193286a Mon Sep 17 00:00:00 2001 From: Beniamino Galvani Date: Thu, 27 Nov 2014 00:07:48 +0100 Subject: spi: meson: Select REGMAP_MMIO The Meson SPIFC driver uses regmap mmio functions and so it must select REGMAP_MMIO to avoid the following build error: spi-meson-spifc.c: undefined reference to `devm_regmap_init_mmio_clk' Reported-by: Jim Davis Signed-off-by: Beniamino Galvani Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 70f20b99e5ff..9d277955b4de 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -304,6 +304,7 @@ config SPI_FSL_ESPI config SPI_MESON_SPIFC tristate "Amlogic Meson SPIFC controller" depends on ARCH_MESON || COMPILE_TEST + select REGMAP_MMIO help This enables master mode support for the SPIFC (SPI flash controller) available in Amlogic Meson SoCs. -- cgit v1.2.3 From 3cc291061ce542edff7a0f7127a654e9d05ee559 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Thu, 27 Nov 2014 16:12:17 +0100 Subject: spi: cadence: Init HW after reading devicetree attributes This will make it possible to use the settings specified in the devicetree to configure the hardware. Signed-off-by: Paul Cercueil Signed-off-by: Lars-Peter Clausen Reviewed-by: Michal Simek Signed-off-by: Mark Brown --- drivers/spi/spi-cadence.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index 7b811e38c7ad..240493706c36 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -516,6 +516,17 @@ static int cdns_spi_probe(struct platform_device *pdev) goto clk_dis_apb; } + ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs); + if (ret < 0) + master->num_chipselect = CDNS_SPI_DEFAULT_NUM_CS; + else + master->num_chipselect = num_cs; + + ret = of_property_read_u32(pdev->dev.of_node, "is-decoded-cs", + &xspi->is_decoded_cs); + if (ret < 0) + xspi->is_decoded_cs = 0; + /* SPI controller initializations */ cdns_spi_init_hw(xspi); @@ -534,19 +545,6 @@ static int cdns_spi_probe(struct platform_device *pdev) goto remove_master; } - ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs); - - if (ret < 0) - master->num_chipselect = CDNS_SPI_DEFAULT_NUM_CS; - else - master->num_chipselect = num_cs; - - ret = of_property_read_u32(pdev->dev.of_node, "is-decoded-cs", - &xspi->is_decoded_cs); - - if (ret < 0) - xspi->is_decoded_cs = 0; - master->prepare_transfer_hardware = cdns_prepare_transfer_hardware; master->prepare_message = cdns_prepare_message; master->transfer_one = cdns_transfer_one; -- cgit v1.2.3 From ee0ebe81004bd0bedf7abe8a2f3eb745da0264dc Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 27 Nov 2014 16:12:18 +0100 Subject: spi: cadence: Fix 3-to-8 mux mode In 3-to-8 mux mode for the CS pins we need to set the PERI_SEL bit in the control register. Currently the driver never sets this bit even when configured for 3-to-8 mux mode. This patch adds code which sets the bit during device initialization when necessary. Signed-off-by: Lars-Peter Clausen Acked-by: Harini Katakam Signed-off-by: Mark Brown --- drivers/spi/spi-cadence.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index 7b811e38c7ad..33f0bec1a7eb 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -47,6 +47,7 @@ #define CDNS_SPI_CR_CPHA_MASK 0x00000004 /* Clock Phase Control */ #define CDNS_SPI_CR_CPOL_MASK 0x00000002 /* Clock Polarity Control */ #define CDNS_SPI_CR_SSCTRL_MASK 0x00003C00 /* Slave Select Mask */ +#define CDNS_SPI_CR_PERI_SEL_MASK 0x00000200 /* Peripheral Select Decode */ #define CDNS_SPI_CR_BAUD_DIV_MASK 0x00000038 /* Baud Rate Divisor Mask */ #define CDNS_SPI_CR_MSTREN_MASK 0x00000001 /* Master Enable Mask */ #define CDNS_SPI_CR_MANSTRTEN_MASK 0x00008000 /* Manual TX Enable Mask */ @@ -148,6 +149,11 @@ static inline void cdns_spi_write(struct cdns_spi *xspi, u32 offset, u32 val) */ static void cdns_spi_init_hw(struct cdns_spi *xspi) { + u32 ctrl_reg = CDNS_SPI_CR_DEFAULT_MASK; + + if (xspi->is_decoded_cs) + ctrl_reg |= CDNS_SPI_CR_PERI_SEL_MASK; + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, CDNS_SPI_ER_DISABLE_MASK); cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET, @@ -160,8 +166,7 @@ static void cdns_spi_init_hw(struct cdns_spi *xspi) cdns_spi_write(xspi, CDNS_SPI_ISR_OFFSET, CDNS_SPI_IXR_ALL_MASK); - cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, - CDNS_SPI_CR_DEFAULT_MASK); + cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg); cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, CDNS_SPI_ER_ENABLE_MASK); } -- cgit v1.2.3 From 7d57cd8946f21db2194154af1b95238af8579f9e Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Sat, 29 Nov 2014 18:34:20 +0100 Subject: spi/txx9: Deletion of an unnecessary check before the function call "clk_disable" The clk_disable() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Mark Brown --- drivers/spi/spi-txx9.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c index 2501a8373e89..f2ab827c81bb 100644 --- a/drivers/spi/spi-txx9.c +++ b/drivers/spi/spi-txx9.c @@ -402,8 +402,7 @@ exit_busy: exit: if (c->workqueue) destroy_workqueue(c->workqueue); - if (c->clk) - clk_disable(c->clk); + clk_disable(c->clk); spi_master_put(master); return ret; } -- cgit v1.2.3 From c592becbe704127ef0b89233ff7f285637491154 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 3 Dec 2014 07:56:17 +0100 Subject: spi: fsl-(e)spi: migrate to generic master queueing Migrates the fsl-(e)spi driver to use the generic master queuing. Avoids the "master is unqueued, this is deprecated" warning. Signed-off-by: Heiner Kallweit Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-espi.c | 13 +++++----- drivers/spi/spi-fsl-lib.c | 59 +--------------------------------------------- drivers/spi/spi-fsl-lib.h | 10 +------- drivers/spi/spi-fsl-spi.c | 14 +++++------ 4 files changed, 14 insertions(+), 82 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index a7f94b6a9e70..90be6405e789 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -411,7 +411,8 @@ static void fsl_espi_rw_trans(struct spi_message *m, kfree(local_buf); } -static void fsl_espi_do_one_msg(struct spi_message *m) +static int fsl_espi_do_one_msg(struct spi_master *master, + struct spi_message *m) { struct spi_transfer *t; u8 *rx_buf = NULL; @@ -441,8 +442,8 @@ static void fsl_espi_do_one_msg(struct spi_message *m) m->actual_length = espi_trans.actual_length; m->status = espi_trans.status; - if (m->complete) - m->complete(m->context); + spi_finalize_current_message(master); + return 0; } static int fsl_espi_setup(struct spi_device *spi) @@ -607,16 +608,14 @@ static struct spi_master * fsl_espi_probe(struct device *dev, dev_set_drvdata(dev, master); - ret = mpc8xxx_spi_probe(dev, mem, irq); - if (ret) - goto err_probe; + mpc8xxx_spi_probe(dev, mem, irq); master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); master->setup = fsl_espi_setup; master->cleanup = fsl_espi_cleanup; + master->transfer_one_message = fsl_espi_do_one_msg; mpc8xxx_spi = spi_master_get_devdata(master); - mpc8xxx_spi->spi_do_one_msg = fsl_espi_do_one_msg; mpc8xxx_spi->spi_remove = fsl_espi_remove; mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem)); diff --git a/drivers/spi/spi-fsl-lib.c b/drivers/spi/spi-fsl-lib.c index 5ddb5b098e4e..446b737e1532 100644 --- a/drivers/spi/spi-fsl-lib.c +++ b/drivers/spi/spi-fsl-lib.c @@ -61,44 +61,6 @@ struct mpc8xxx_spi_probe_info *to_of_pinfo(struct fsl_spi_platform_data *pdata) return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); } -static void mpc8xxx_spi_work(struct work_struct *work) -{ - struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi, - work); - - spin_lock_irq(&mpc8xxx_spi->lock); - while (!list_empty(&mpc8xxx_spi->queue)) { - struct spi_message *m = container_of(mpc8xxx_spi->queue.next, - struct spi_message, queue); - - list_del_init(&m->queue); - spin_unlock_irq(&mpc8xxx_spi->lock); - - if (mpc8xxx_spi->spi_do_one_msg) - mpc8xxx_spi->spi_do_one_msg(m); - - spin_lock_irq(&mpc8xxx_spi->lock); - } - spin_unlock_irq(&mpc8xxx_spi->lock); -} - -int mpc8xxx_spi_transfer(struct spi_device *spi, - struct spi_message *m) -{ - struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - unsigned long flags; - - m->actual_length = 0; - m->status = -EINPROGRESS; - - spin_lock_irqsave(&mpc8xxx_spi->lock, flags); - list_add_tail(&m->queue, &mpc8xxx_spi->queue); - queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work); - spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags); - - return 0; -} - const char *mpc8xxx_spi_strmode(unsigned int flags) { if (flags & SPI_QE_CPU_MODE) { @@ -114,13 +76,12 @@ const char *mpc8xxx_spi_strmode(unsigned int flags) return "CPU"; } -int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, +void mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) { struct fsl_spi_platform_data *pdata = dev_get_platdata(dev); struct spi_master *master; struct mpc8xxx_spi *mpc8xxx_spi; - int ret = 0; master = dev_get_drvdata(dev); @@ -128,7 +89,6 @@ int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST | SPI_LOOP; - master->transfer = mpc8xxx_spi_transfer; master->dev.of_node = dev->of_node; mpc8xxx_spi = spi_master_get_devdata(master); @@ -147,22 +107,7 @@ int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, master->bus_num = pdata->bus_num; master->num_chipselect = pdata->max_chipselect; - spin_lock_init(&mpc8xxx_spi->lock); init_completion(&mpc8xxx_spi->done); - INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work); - INIT_LIST_HEAD(&mpc8xxx_spi->queue); - - mpc8xxx_spi->workqueue = create_singlethread_workqueue( - dev_name(master->dev.parent)); - if (mpc8xxx_spi->workqueue == NULL) { - ret = -EBUSY; - goto err; - } - - return 0; - -err: - return ret; } int mpc8xxx_spi_remove(struct device *dev) @@ -173,8 +118,6 @@ int mpc8xxx_spi_remove(struct device *dev) master = dev_get_drvdata(dev); mpc8xxx_spi = spi_master_get_devdata(master); - flush_workqueue(mpc8xxx_spi->workqueue); - destroy_workqueue(mpc8xxx_spi->workqueue); spi_unregister_master(master); free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); diff --git a/drivers/spi/spi-fsl-lib.h b/drivers/spi/spi-fsl-lib.h index 2fcbfd01d109..b4ed04e8862f 100644 --- a/drivers/spi/spi-fsl-lib.h +++ b/drivers/spi/spi-fsl-lib.h @@ -55,7 +55,6 @@ struct mpc8xxx_spi { u32(*get_tx) (struct mpc8xxx_spi *); /* hooks for different controller driver */ - void (*spi_do_one_msg) (struct spi_message *m); void (*spi_remove) (struct mpc8xxx_spi *mspi); unsigned int count; @@ -78,12 +77,6 @@ struct mpc8xxx_spi { int bits_per_word, int msb_first); #endif - struct workqueue_struct *workqueue; - struct work_struct work; - - struct list_head queue; - spinlock_t lock; - struct completion done; }; @@ -123,9 +116,8 @@ extern struct mpc8xxx_spi_probe_info *to_of_pinfo( struct fsl_spi_platform_data *pdata); extern int mpc8xxx_spi_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, unsigned int len); -extern int mpc8xxx_spi_transfer(struct spi_device *spi, struct spi_message *m); extern const char *mpc8xxx_spi_strmode(unsigned int flags); -extern int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, +extern void mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq); extern int mpc8xxx_spi_remove(struct device *dev); extern int of_mpc8xxx_spi_probe(struct platform_device *ofdev); diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index ed792880c9d6..6b94428a0223 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -353,7 +353,8 @@ static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t, return mpc8xxx_spi->count; } -static void fsl_spi_do_one_msg(struct spi_message *m) +static int fsl_spi_do_one_msg(struct spi_master *master, + struct spi_message *m) { struct spi_device *spi = m->spi; struct spi_transfer *t, *first; @@ -408,8 +409,7 @@ static void fsl_spi_do_one_msg(struct spi_message *m) } m->status = status; - if (m->complete) - m->complete(m->context); + spi_finalize_current_message(master); if (status || !cs_change) { ndelay(nsecs); @@ -417,6 +417,7 @@ static void fsl_spi_do_one_msg(struct spi_message *m) } fsl_spi_setup_transfer(spi, NULL); + return 0; } static int fsl_spi_setup(struct spi_device *spi) @@ -624,15 +625,13 @@ static struct spi_master * fsl_spi_probe(struct device *dev, dev_set_drvdata(dev, master); - ret = mpc8xxx_spi_probe(dev, mem, irq); - if (ret) - goto err_probe; + mpc8xxx_spi_probe(dev, mem, irq); master->setup = fsl_spi_setup; master->cleanup = fsl_spi_cleanup; + master->transfer_one_message = fsl_spi_do_one_msg; mpc8xxx_spi = spi_master_get_devdata(master); - mpc8xxx_spi->spi_do_one_msg = fsl_spi_do_one_msg; mpc8xxx_spi->spi_remove = fsl_spi_remove; mpc8xxx_spi->max_bits_per_word = 32; mpc8xxx_spi->type = fsl_spi_get_type(dev); @@ -704,7 +703,6 @@ free_irq: err_ioremap: fsl_spi_cpm_free(mpc8xxx_spi); err_cpm_init: -err_probe: spi_master_put(master); err: return ERR_PTR(ret); -- cgit v1.2.3 From 75506d0e0084ee7f074be3c5da6d5de98ce347b6 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 3 Dec 2014 07:56:19 +0100 Subject: spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use Use (un)prepare_transfer_hardware calls to set fsl-espi to low-power idle if not in use. Reference manual states: "The eSPI is in a idle state and consumes minimal power. The eSPI BRG is not functioning and the input clock is disabled" Signed-off-by: Heiner Kallweit Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-espi.c | 46 +++++++++++++++++++++++++++++++++++----------- 1 file changed, 35 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index 90be6405e789..56cadf13519e 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -588,6 +588,38 @@ static void fsl_espi_remove(struct mpc8xxx_spi *mspi) iounmap(mspi->reg_base); } +static int fsl_espi_suspend(struct spi_master *master) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_espi_reg *reg_base; + u32 regval; + + mpc8xxx_spi = spi_master_get_devdata(master); + reg_base = mpc8xxx_spi->reg_base; + + regval = mpc8xxx_spi_read_reg(®_base->mode); + regval &= ~SPMODE_ENABLE; + mpc8xxx_spi_write_reg(®_base->mode, regval); + + return 0; +} + +static int fsl_espi_resume(struct spi_master *master) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_espi_reg *reg_base; + u32 regval; + + mpc8xxx_spi = spi_master_get_devdata(master); + reg_base = mpc8xxx_spi->reg_base; + + regval = mpc8xxx_spi_read_reg(®_base->mode); + regval |= SPMODE_ENABLE; + mpc8xxx_spi_write_reg(®_base->mode, regval); + + return 0; +} + static struct spi_master * fsl_espi_probe(struct device *dev, struct resource *mem, unsigned int irq) { @@ -614,6 +646,8 @@ static struct spi_master * fsl_espi_probe(struct device *dev, master->setup = fsl_espi_setup; master->cleanup = fsl_espi_cleanup; master->transfer_one_message = fsl_espi_do_one_msg; + master->prepare_transfer_hardware = fsl_espi_resume; + master->unprepare_transfer_hardware = fsl_espi_suspend; mpc8xxx_spi = spi_master_get_devdata(master); mpc8xxx_spi->spi_remove = fsl_espi_remove; @@ -761,25 +795,15 @@ static int of_fsl_espi_remove(struct platform_device *dev) static int of_fsl_espi_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); - struct mpc8xxx_spi *mpc8xxx_spi; - struct fsl_espi_reg *reg_base; - u32 regval; int ret; - mpc8xxx_spi = spi_master_get_devdata(master); - reg_base = mpc8xxx_spi->reg_base; - ret = spi_master_suspend(master); if (ret) { dev_warn(dev, "cannot suspend master\n"); return ret; } - regval = mpc8xxx_spi_read_reg(®_base->mode); - regval &= ~SPMODE_ENABLE; - mpc8xxx_spi_write_reg(®_base->mode, regval); - - return 0; + return fsl_espi_suspend(master); } static int of_fsl_espi_resume(struct device *dev) -- cgit v1.2.3 From 98a8f5a0538fe1a02a6a73a3451f1c093e30bdfc Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 4 Dec 2014 11:02:25 +0200 Subject: spi: core: Do not mangle error code from kthread_run() kthread_run() could return ERR_PTR(-EINTR) from kthread_create_on_node(). Return the actual error code in spi_init_queue() instead of mangling it to -ENOMEM. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index ebcb33df2eb2..4395a5406e5c 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1001,7 +1001,7 @@ static int spi_init_queue(struct spi_master *master) dev_name(&master->dev)); if (IS_ERR(master->kworker_task)) { dev_err(&master->dev, "failed to create message pump task\n"); - return -ENOMEM; + return PTR_ERR(master->kworker_task); } init_kthread_work(&master->pump_messages, spi_pump_messages); -- cgit v1.2.3 From 75c410884aff0c502dcb34cc58997e67e9b61e5f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 4 Dec 2014 11:15:47 -0200 Subject: spi: spi-fsl-spi: Return an error code in fsl_spi_do_one_msg() Since commit c592becbe704127 ("spi: fsl-(e)spi: migrate to generic master queueing") the function fsl_spi_do_one_msg() is not void anymore, so return an error code to avoid the following buid warning: drivers/spi/spi-fsl-spi.c: In function 'fsl_spi_do_one_msg': >> drivers/spi/spi-fsl-spi.c:374:4: warning: 'return' with no value, in function returning non-void [-Wreturn-type] return; ^ Reported-by: kbuild test robot Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 6b94428a0223..5e02c1f3e145 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -371,7 +371,7 @@ static int fsl_spi_do_one_msg(struct spi_master *master, status = -EINVAL; dev_err(&spi->dev, "bits_per_word/speed_hz should be same for the same SPI transfer\n"); - return; + return -EINVAL; } } -- cgit v1.2.3 From 1a7e06d2602f388485ba507bbee70766408db8ee Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Thu, 4 Dec 2014 20:28:11 +0100 Subject: spi: fsl-spi: remove unused variable assignment Remove an unused variable assignment. Signed-off-by: Heiner Kallweit Reviewed-by: Fabio Estevam Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-spi.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 5e02c1f3e145..3b159364c459 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -368,7 +368,6 @@ static int fsl_spi_do_one_msg(struct spi_master *master, list_for_each_entry(t, &m->transfers, transfer_list) { if ((first->bits_per_word != t->bits_per_word) || (first->speed_hz != t->speed_hz)) { - status = -EINVAL; dev_err(&spi->dev, "bits_per_word/speed_hz should be same for the same SPI transfer\n"); return -EINVAL; -- cgit v1.2.3 From bc88f11baf5a7e6671eac6fe3131c087d71a646f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 5 Dec 2014 20:23:06 +0000 Subject: spi/s3c64xx: Remove redundant runtime PM management The device already asks the core to hold a runtime PM reference while it is active so it is redundant to open code that in the driver itself. Signed-off-by: Mark Brown --- drivers/spi/spi-s3c64xx.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 59e07cf31598..0f602cba1989 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -346,16 +346,8 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi) spi->dma_tx = sdd->tx_dma.ch; } - ret = pm_runtime_get_sync(&sdd->pdev->dev); - if (ret < 0) { - dev_err(dev, "Failed to enable device: %d\n", ret); - goto out_tx; - } - return 0; -out_tx: - dma_release_channel(sdd->tx_dma.ch); out_rx: dma_release_channel(sdd->rx_dma.ch); out: @@ -372,7 +364,6 @@ static int s3c64xx_spi_unprepare_transfer(struct spi_master *spi) dma_release_channel(sdd->tx_dma.ch); } - pm_runtime_put(&sdd->pdev->dev); return 0; } -- cgit v1.2.3