From aeab3fd7b865bc4086a80a83cfdd67dded3b41a0 Mon Sep 17 00:00:00 2001 From: Noriyuki Fujii Date: Fri, 20 Nov 2009 16:27:20 +0900 Subject: [SCSI] megaraid_sas: make driver PCI legacy I/O port free driver On the large servers, I/O port resource may not be assigned to all the PCI devices since it is limited (to 64KB on Intel Architecture[1]) and it may also be fragmented (I/O base register of PCI-to-PCI bridge will usually be aligned to a 4KB boundary[2]). If no I/O port resource is assigned to devices, those devices do not work. [1] Some machines support 64KB I/O port space per PCI segment. [2] Some P2P bridges support optional 1KB aligned I/O base. Therefore, I made a patch for MegaRAID SAS driver to make PCI legacy I/O port free. I have also tested the patch and it had no problem. The way to make PCI legacy I/O port free is the same as Fusion-MPT driver's and it has been merged into 2.6.30.4. This has already been fixed in e1000 and lpfc. As a result of the above, the driver can handle its device even when there are a huge number of PCI devices being used on the system and no I/O port region assigned to the device. Signed-off-by: Noriyuki Fujii Acked-by: "Yang, Bo" Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 134c63ef6d38..99ff99e45bee 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -2501,7 +2501,9 @@ static int megasas_init_mfi(struct megasas_instance *instance) instance->base_addr = pci_resource_start(instance->pdev, 0); } - if (pci_request_regions(instance->pdev, "megasas: LSI")) { + if (pci_request_selected_regions(instance->pdev, + pci_select_bars(instance->pdev, IORESOURCE_MEM), + "megasas: LSI")) { printk(KERN_DEBUG "megasas: IO memory region busy!\n"); return -EBUSY; } @@ -2642,7 +2644,8 @@ static int megasas_init_mfi(struct megasas_instance *instance) iounmap(instance->reg_set); fail_ioremap: - pci_release_regions(instance->pdev); + pci_release_selected_regions(instance->pdev, + pci_select_bars(instance->pdev, IORESOURCE_MEM)); return -EINVAL; } @@ -2662,7 +2665,8 @@ static void megasas_release_mfi(struct megasas_instance *instance) iounmap(instance->reg_set); - pci_release_regions(instance->pdev); + pci_release_selected_regions(instance->pdev, + pci_select_bars(instance->pdev, IORESOURCE_MEM)); } /** @@ -2971,7 +2975,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* * PCI prepping: enable device set bus mastering and dma mask */ - rval = pci_enable_device(pdev); + rval = pci_enable_device_mem(pdev); if (rval) { return rval; @@ -3276,7 +3280,7 @@ megasas_resume(struct pci_dev *pdev) /* * PCI prepping: enable device set bus mastering and dma mask */ - rval = pci_enable_device(pdev); + rval = pci_enable_device_mem(pdev); if (rval) { printk(KERN_ERR "megasas: Enable device failed\n"); -- cgit v1.2.3