From a3aa6e65beebf3780026753ebf39db19f4c92990 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 26 Sep 2019 00:08:42 +0200 Subject: net: dsa: microchip: Always set regmap stride to 1 The regmap stride is set to 1 for regmap describing 8bit registers already. However, for 16/32/64bit registers, the stride is 2/4/8 respectively. This is not correct, as the switch protocol supports unaligned register reads and writes and the KSZ87xx even uses such unaligned register accesses to read e.g. MIB counter. This patch fixes MIB counter access on KSZ87xx. Signed-off-by: Marek Vasut Cc: Andrew Lunn Cc: David S. Miller Cc: Florian Fainelli Cc: George McCollister Cc: Tristram Ha Cc: Vivien Didelot Cc: Woojung Huh Fixes: 46558d601cb6 ("net: dsa: microchip: Initial SPI regmap support") Fixes: 255b59ad0db2 ("net: dsa: microchip: Factor out regmap config generation into common header") Reviewed-by: George McCollister Tested-by: George McCollister Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index a24d8e61fbe7..dd60d0837fc6 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -303,7 +303,7 @@ static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset, { \ .name = #width, \ .val_bits = (width), \ - .reg_stride = (width) / 8, \ + .reg_stride = 1, \ .reg_bits = (regbits) + (regalign), \ .pad_bits = (regpad), \ .max_register = BIT(regbits) - 1, \ -- cgit v1.2.3