From 8997c27ec41127bf57421cc0205413d525421ddc Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 26 Jan 2015 22:28:13 +0100 Subject: caif: remove wrong dev_net_set() call MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit src_net points to the netns where the netlink message has been received. This netns may be different from the netns where the interface is created (because the user may add IFLA_NET_NS_[PID|FD]). In this case, src_net is the link netns. It seems wrong to override the netns in the newlink() handler because if it was not already src_net, it means that the user explicitly asks to create the netdevice in another netns. CC: Sjur Brændeland CC: Dmitry Tarnyagin Fixes: 8391c4aab1aa ("caif: Bugfixes in CAIF netdevice for close and flow control") Fixes: c41254006377 ("caif-hsi: Add rtnl support") Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/caif/caif_hsi.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c index 5e40a8b68cbe..b3b922adc0e4 100644 --- a/drivers/net/caif/caif_hsi.c +++ b/drivers/net/caif/caif_hsi.c @@ -1415,7 +1415,6 @@ static int caif_hsi_newlink(struct net *src_net, struct net_device *dev, cfhsi = netdev_priv(dev); cfhsi_netlink_parms(data, cfhsi); - dev_net_set(cfhsi->ndev, src_net); get_ops = symbol_get(cfhsi_get_ops); if (!get_ops) { -- cgit v1.2.3 From 33564bbb2cf1c05cf3882af5d62a0b2b4a09754c Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 26 Jan 2015 22:28:14 +0100 Subject: vxlan: setup the right link netns in newlink hdlr Rename the netns to src_net to avoid confusion with the netns where the interface stands. The user may specify IFLA_NET_NS_[PID|FD] to create a x-netns netndevice: IFLA_NET_NS_[PID|FD] points to the netns where the netdevice stands and src_net to the link netns. Note that before commit f01ec1c017de ("vxlan: add x-netns support"), it was possible to create a x-netns vxlan netdevice, but the netdevice was not operational. Fixes: f01ec1c017de ("vxlan: add x-netns support") Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 7fbd89fbe107..a8c755dcab14 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2432,10 +2432,10 @@ static void vxlan_sock_work(struct work_struct *work) dev_put(vxlan->dev); } -static int vxlan_newlink(struct net *net, struct net_device *dev, +static int vxlan_newlink(struct net *src_net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { - struct vxlan_net *vn = net_generic(net, vxlan_net_id); + struct vxlan_net *vn = net_generic(src_net, vxlan_net_id); struct vxlan_dev *vxlan = netdev_priv(dev); struct vxlan_rdst *dst = &vxlan->default_dst; __u32 vni; @@ -2445,7 +2445,7 @@ static int vxlan_newlink(struct net *net, struct net_device *dev, if (!data[IFLA_VXLAN_ID]) return -EINVAL; - vxlan->net = dev_net(dev); + vxlan->net = src_net; vni = nla_get_u32(data[IFLA_VXLAN_ID]); dst->remote_vni = vni; @@ -2481,7 +2481,7 @@ static int vxlan_newlink(struct net *net, struct net_device *dev, if (data[IFLA_VXLAN_LINK] && (dst->remote_ifindex = nla_get_u32(data[IFLA_VXLAN_LINK]))) { struct net_device *lowerdev - = __dev_get_by_index(net, dst->remote_ifindex); + = __dev_get_by_index(src_net, dst->remote_ifindex); if (!lowerdev) { pr_info("ifindex %d does not exist\n", dst->remote_ifindex); @@ -2557,7 +2557,7 @@ static int vxlan_newlink(struct net *net, struct net_device *dev, nla_get_u8(data[IFLA_VXLAN_UDP_ZERO_CSUM6_RX])) vxlan->flags |= VXLAN_F_UDP_ZERO_CSUM6_RX; - if (vxlan_find_vni(net, vni, use_ipv6 ? AF_INET6 : AF_INET, + if (vxlan_find_vni(src_net, vni, use_ipv6 ? AF_INET6 : AF_INET, vxlan->dst_port)) { pr_info("duplicate VNI %u\n", vni); return -EEXIST; -- cgit v1.2.3 From e2a4800e75780ccf4e6c2487f82b688ba736eb18 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 28 Jan 2015 10:56:04 +0100 Subject: ppp: deflate: never return len larger than output buffer When we've run out of space in the output buffer to store more data, we will call zlib_deflate with a NULL output buffer until we've consumed remaining input. When this happens, olen contains the size the output buffer would have consumed iff we'd have had enough room. This can later cause skb_over_panic when ppp_generic skb_put()s the returned length. Reported-by: Iain Douglas Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- drivers/net/ppp/ppp_deflate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ppp/ppp_deflate.c b/drivers/net/ppp/ppp_deflate.c index 602c625d95d5..b5edc7f96a39 100644 --- a/drivers/net/ppp/ppp_deflate.c +++ b/drivers/net/ppp/ppp_deflate.c @@ -246,7 +246,7 @@ static int z_compress(void *arg, unsigned char *rptr, unsigned char *obuf, /* * See if we managed to reduce the size of the packet. */ - if (olen < isize) { + if (olen < isize && olen <= osize) { state->stats.comp_bytes += olen; state->stats.comp_packets++; } else { -- cgit v1.2.3 From fc9a5707832e57f2317c89101fbe9d4ccbd62fa6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 28 Jan 2015 15:15:01 +0100 Subject: net: cs89x0: always build platform code if !HAS_IOPORT_MAP The cs89x0 driver can either be built as an ISA driver or a platform driver, the choice is controlled by the CS89x0_PLATFORM Kconfig symbol. Building the ISA driver on a system that does not have a way to map I/O ports fails with this error: drivers/built-in.o: In function `cs89x0_ioport_probe.constprop.1': :(.init.text+0x4794): undefined reference to `ioport_map' :(.init.text+0x4830): undefined reference to `ioport_unmap' This changes the Kconfig logic to take that option away and always force building the platform variant of this driver if CONFIG_HAS_IOPORT_MAP is not set. This is the only correct choice in this case, and it avoids the build error. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/cirrus/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig index 7403dff8f14a..905ac5f5d9a6 100644 --- a/drivers/net/ethernet/cirrus/Kconfig +++ b/drivers/net/ethernet/cirrus/Kconfig @@ -32,7 +32,8 @@ config CS89x0 will be called cs89x0. config CS89x0_PLATFORM - bool "CS89x0 platform driver support" + bool "CS89x0 platform driver support" if HAS_IOPORT_MAP + default !HAS_IOPORT_MAP depends on CS89x0 help Say Y to compile the cs89x0 driver as a platform driver. This -- cgit v1.2.3 From 303c28d859cc7ab0f1f37acdd4aadf87c6e86743 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 28 Jan 2015 15:15:02 +0100 Subject: net: wan: add missing virt_to_bus dependencies The cosa driver is rather outdated and does not get built on most platforms because it requires the ISA_DMA_API symbol. However there are some ARM platforms that have ISA_DMA_API but no virt_to_bus, and they get this build error when enabling the ltpc driver. drivers/net/wan/cosa.c: In function 'tx_interrupt': drivers/net/wan/cosa.c:1768:3: error: implicit declaration of function 'virt_to_bus' unsigned long addr = virt_to_bus(cosa->txbuf); ^ The same problem exists for the Hostess SV-11 and Sealevel Systems 4021 drivers. This adds another dependency in Kconfig to avoid that configuration. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/wan/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 94e234975c61..a2fdd15f285a 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -25,7 +25,7 @@ if WAN # There is no way to detect a comtrol sv11 - force it modular for now. config HOSTESS_SV11 tristate "Comtrol Hostess SV-11 support" - depends on ISA && m && ISA_DMA_API && INET && HDLC + depends on ISA && m && ISA_DMA_API && INET && HDLC && VIRT_TO_BUS help Driver for Comtrol Hostess SV-11 network card which operates on low speed synchronous serial links at up to @@ -37,7 +37,7 @@ config HOSTESS_SV11 # The COSA/SRP driver has not been tested as non-modular yet. config COSA tristate "COSA/SRP sync serial boards support" - depends on ISA && m && ISA_DMA_API && HDLC + depends on ISA && m && ISA_DMA_API && HDLC && VIRT_TO_BUS ---help--- Driver for COSA and SRP synchronous serial boards. @@ -87,7 +87,7 @@ config LANMEDIA # There is no way to detect a Sealevel board. Force it modular config SEALEVEL_4021 tristate "Sealevel Systems 4021 support" - depends on ISA && m && ISA_DMA_API && INET && HDLC + depends on ISA && m && ISA_DMA_API && INET && HDLC && VIRT_TO_BUS help This is a driver for the Sealevel Systems ACB 56 serial I/O adapter. -- cgit v1.2.3 From e9b106b8fbdb98ceab2dfa46cebe097bd1a47bac Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 28 Jan 2015 15:15:03 +0100 Subject: net: lance,ni64: don't build for ARM The ni65 and lance ethernet drivers manually program the ISA DMA controller that is only available on x86 PCs and a few compatible systems. Trying to build it on ARM results in this error: ni65.c: In function 'ni65_probe1': ni65.c:496:62: error: 'DMA1_STAT_REG' undeclared (first use in this function) ((inb(DMA1_STAT_REG) >> 4) & 0x0f) ^ ni65.c:496:62: note: each undeclared identifier is reported only once for each function it appears in ni65.c:497:63: error: 'DMA2_STAT_REG' undeclared (first use in this function) | (inb(DMA2_STAT_REG) & 0xf0); The DMA1_STAT_REG and DMA2_STAT_REG registers are only defined for alpha, mips, parisc, powerpc and x86, although it is not clear which subarchitectures actually have them at the correct location. This patch for now just disables it for ARM, to avoid randconfig build errors. We could also decide to limit it to the set of architectures on which it does compile, but that might look more deliberate than guessing based on where the drivers build. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index 7a5e4aa5415e..77f1f6048ddd 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -45,7 +45,7 @@ config AMD8111_ETH config LANCE tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" - depends on ISA && ISA_DMA_API + depends on ISA && ISA_DMA_API && !ARM ---help--- If you have a network (Ethernet) card of this type, say Y and read the Ethernet-HOWTO, available from @@ -142,7 +142,7 @@ config PCMCIA_NMCLAN config NI65 tristate "NI6510 support" - depends on ISA && ISA_DMA_API + depends on ISA && ISA_DMA_API && !ARM ---help--- If you have a network (Ethernet) card of this type, say Y and read the Ethernet-HOWTO, available from -- cgit v1.2.3 From 96a30175f927facfb421655ef08b7a0fe546fbed Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 28 Jan 2015 15:15:04 +0100 Subject: net: am2150: fix nmclan_cs.c shared interrupt handling A recent patch tried to work around a valid warning for the use of a deprecated interface by blindly changing from the old pcmcia_request_exclusive_irq() interface to pcmcia_request_irq(). This driver has an interrupt handler that is not currently aware of shared interrupts, but can be easily converted to be. At the moment, the driver reads the interrupt status register repeatedly until it contains only zeroes in the interesting bits, and handles each bit individually. This patch adds the missing part of returning IRQ_NONE in case none of the bits are set to start with, so we can move on to the next interrupt source. Signed-off-by: Arnd Bergmann Fixes: 5f5316fcd08ef7 ("am2150: Update nmclan_cs.c to use update PCMCIA API") Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/nmclan_cs.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/nmclan_cs.c b/drivers/net/ethernet/amd/nmclan_cs.c index 5b22764ba88d..27245efe9f50 100644 --- a/drivers/net/ethernet/amd/nmclan_cs.c +++ b/drivers/net/ethernet/amd/nmclan_cs.c @@ -952,6 +952,8 @@ static irqreturn_t mace_interrupt(int irq, void *dev_id) do { /* WARNING: MACE_IR is a READ/CLEAR port! */ status = inb(ioaddr + AM2150_MACE_BASE + MACE_IR); + if (!(status & ~MACE_IMR_DEFAULT) && IntrCnt == MACE_MAX_IR_ITERATIONS) + return IRQ_NONE; pr_debug("mace_interrupt: irq 0x%X status 0x%X.\n", irq, status); -- cgit v1.2.3 From 72b1405964c19b99ad9f75340249b16305cf31ab Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Thu, 29 Jan 2015 20:37:08 +0900 Subject: igbvf: Fix checksum error when using stacked vlan When a skb has multiple vlans and it is CHECKSUM_PARTIAL, igbvf_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use vlan_get_protocol() to get the proper network protocol. Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/igbvf/netdev.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 63c807c9b21c..edea13b0ee85 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -1907,7 +1907,8 @@ static void igbvf_watchdog_task(struct work_struct *work) static int igbvf_tso(struct igbvf_adapter *adapter, struct igbvf_ring *tx_ring, - struct sk_buff *skb, u32 tx_flags, u8 *hdr_len) + struct sk_buff *skb, u32 tx_flags, u8 *hdr_len, + __be16 protocol) { struct e1000_adv_tx_context_desc *context_desc; struct igbvf_buffer *buffer_info; @@ -1927,7 +1928,7 @@ static int igbvf_tso(struct igbvf_adapter *adapter, l4len = tcp_hdrlen(skb); *hdr_len += l4len; - if (skb->protocol == htons(ETH_P_IP)) { + if (protocol == htons(ETH_P_IP)) { struct iphdr *iph = ip_hdr(skb); iph->tot_len = 0; iph->check = 0; @@ -1958,7 +1959,7 @@ static int igbvf_tso(struct igbvf_adapter *adapter, /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT); - if (skb->protocol == htons(ETH_P_IP)) + if (protocol == htons(ETH_P_IP)) tu_cmd |= E1000_ADVTXD_TUCMD_IPV4; tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP; @@ -1984,7 +1985,8 @@ static int igbvf_tso(struct igbvf_adapter *adapter, static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter, struct igbvf_ring *tx_ring, - struct sk_buff *skb, u32 tx_flags) + struct sk_buff *skb, u32 tx_flags, + __be16 protocol) { struct e1000_adv_tx_context_desc *context_desc; unsigned int i; @@ -2011,7 +2013,7 @@ static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter, tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT); if (skb->ip_summed == CHECKSUM_PARTIAL) { - switch (skb->protocol) { + switch (protocol) { case htons(ETH_P_IP): tu_cmd |= E1000_ADVTXD_TUCMD_IPV4; if (ip_hdr(skb)->protocol == IPPROTO_TCP) @@ -2211,6 +2213,7 @@ static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb, u8 hdr_len = 0; int count = 0; int tso = 0; + __be16 protocol = vlan_get_protocol(skb); if (test_bit(__IGBVF_DOWN, &adapter->state)) { dev_kfree_skb_any(skb); @@ -2239,13 +2242,13 @@ static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb, tx_flags |= (vlan_tx_tag_get(skb) << IGBVF_TX_FLAGS_VLAN_SHIFT); } - if (skb->protocol == htons(ETH_P_IP)) + if (protocol == htons(ETH_P_IP)) tx_flags |= IGBVF_TX_FLAGS_IPV4; first = tx_ring->next_to_use; tso = skb_is_gso(skb) ? - igbvf_tso(adapter, tx_ring, skb, tx_flags, &hdr_len) : 0; + igbvf_tso(adapter, tx_ring, skb, tx_flags, &hdr_len, protocol) : 0; if (unlikely(tso < 0)) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; @@ -2253,7 +2256,7 @@ static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb, if (tso) tx_flags |= IGBVF_TX_FLAGS_TSO; - else if (igbvf_tx_csum(adapter, tx_ring, skb, tx_flags) && + else if (igbvf_tx_csum(adapter, tx_ring, skb, tx_flags, protocol) && (skb->ip_summed == CHECKSUM_PARTIAL)) tx_flags |= IGBVF_TX_FLAGS_CSUM; -- cgit v1.2.3 From 0213668f060ea966ee8f4e6334f0fd27b6a1c428 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Thu, 29 Jan 2015 20:37:09 +0900 Subject: ixgbe: Fix checksum error when using stacked vlan When a skb has multiple vlans and it is CHECKSUM_PARTIAL, ixgbe_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use vlan_get_protocol() to get the proper network protocol. Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 2ed2c7de2304..67b02bde179e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7227,11 +7227,11 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, if (!vhdr) goto out_drop; - protocol = vhdr->h_vlan_encapsulated_proto; tx_flags |= ntohs(vhdr->h_vlan_TCI) << IXGBE_TX_FLAGS_VLAN_SHIFT; tx_flags |= IXGBE_TX_FLAGS_SW_VLAN; } + protocol = vlan_get_protocol(skb); if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && adapter->ptp_clock && -- cgit v1.2.3 From 10e4fb333c9ad72491f80bed018f8007e17060d1 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Thu, 29 Jan 2015 20:37:10 +0900 Subject: ixgbevf: Fix checksum error when using stacked vlan When a skb has multiple vlans and it is CHECKSUM_PARTIAL, ixgbevf_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use first->protocol instead of skb->protocol to get the proper network protocol. Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 62a0d8e0f17d..38c7a0be8197 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -3099,7 +3099,7 @@ static int ixgbevf_tso(struct ixgbevf_ring *tx_ring, /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_TCP; - if (skb->protocol == htons(ETH_P_IP)) { + if (first->protocol == htons(ETH_P_IP)) { struct iphdr *iph = ip_hdr(skb); iph->tot_len = 0; iph->check = 0; @@ -3156,7 +3156,7 @@ static void ixgbevf_tx_csum(struct ixgbevf_ring *tx_ring, if (skb->ip_summed == CHECKSUM_PARTIAL) { u8 l4_hdr = 0; - switch (skb->protocol) { + switch (first->protocol) { case htons(ETH_P_IP): vlan_macip_lens |= skb_network_header_len(skb); type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4; -- cgit v1.2.3 From ecf6ba83d76e0c78e89401750dc527008e14faa2 Mon Sep 17 00:00:00 2001 From: Iyappan Subramanian Date: Thu, 29 Jan 2015 14:38:23 -0800 Subject: drivers: net: xgene: fix: Out of order descriptor bytes read This patch fixes the following kernel crash, WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_input.c:3079 tcp_clean_rtx_queue+0x658/0x80c() Call trace: [] dump_backtrace+0x0/0x184 [] show_stack+0x10/0x1c [] dump_stack+0x74/0x98 [] warn_slowpath_common+0x88/0xb0 [] warn_slowpath_null+0x14/0x20 [] tcp_clean_rtx_queue+0x654/0x80c [] tcp_ack+0x454/0x688 [] tcp_rcv_established+0x4a4/0x62c [] tcp_v4_do_rcv+0x16c/0x350 [] tcp_v4_rcv+0x8e8/0x904 [] ip_local_deliver_finish+0x100/0x26c [] ip_local_deliver+0xac/0xc4 [] ip_rcv_finish+0xe8/0x328 [] ip_rcv+0x24c/0x38c [] __netif_receive_skb_core+0x29c/0x7c8 [] __netif_receive_skb+0x28/0x7c [] netif_receive_skb_internal+0x5c/0xe0 [] napi_gro_receive+0xb4/0x110 [] xgene_enet_process_ring+0x144/0x338 [] xgene_enet_napi+0x1c/0x50 [] net_rx_action+0x154/0x228 [] __do_softirq+0x110/0x28c [] irq_exit+0x8c/0xc0 [] handle_IRQ+0x44/0xa8 [] gic_handle_irq+0x38/0x7c [...] Software writes poison data into the descriptor bytes[15:8] and upon receiving the interrupt, if those bytes are overwritten by the hardware with the valid data, software also reads bytes[7:0] and executes receive/tx completion logic. If the CPU executes the above two reads in out of order fashion, then the bytes[7:0] will have older data and causing the kernel panic. We have to force the order of the reads and thus this patch introduces read memory barrier between these reads. Signed-off-by: Iyappan Subramanian Signed-off-by: Keyur Chudgar Signed-off-by: David S. Miller --- drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c index 83a50280bb70..793f3b73eeff 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c @@ -369,6 +369,8 @@ static int xgene_enet_process_ring(struct xgene_enet_desc_ring *ring, if (unlikely(xgene_enet_is_desc_slot_empty(raw_desc))) break; + /* read fpqnum field after dataaddr field */ + dma_rmb(); if (is_rx_desc(raw_desc)) ret = xgene_enet_rx_frame(ring, raw_desc); else -- cgit v1.2.3 From d953ca4ddf71aa91a4596b2ff7ff1598f6ad4708 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Thu, 29 Jan 2015 12:34:49 -0800 Subject: hyperv: Fix the error processing in netvsc_send() The existing code frees the skb in EAGAIN case, in which the skb will be retried from upper layer and used again. Also, the existing code doesn't free send buffer slot in error case, because there is no completion message for unsent packets. This patch fixes these problems. (Please also include this patch for stable trees. Thanks!) Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 9f49c0129a78..7cd4eb38abfa 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -716,7 +716,7 @@ int netvsc_send(struct hv_device *device, u64 req_id; unsigned int section_index = NETVSC_INVALID_INDEX; u32 msg_size = 0; - struct sk_buff *skb; + struct sk_buff *skb = NULL; u16 q_idx = packet->q_idx; @@ -743,8 +743,6 @@ int netvsc_send(struct hv_device *device, packet); skb = (struct sk_buff *) (unsigned long)packet->send_completion_tid; - if (skb) - dev_kfree_skb_any(skb); packet->page_buf_cnt = 0; } } @@ -810,6 +808,13 @@ int netvsc_send(struct hv_device *device, packet, ret); } + if (ret != 0) { + if (section_index != NETVSC_INVALID_INDEX) + netvsc_free_send_slot(net_device, section_index); + } else if (skb) { + dev_kfree_skb_any(skb); + } + return ret; } -- cgit v1.2.3 From 61132bf7fbe3a802df1f68ad08e8ca10d6b30ddc Mon Sep 17 00:00:00 2001 From: Marcelo Leitner Date: Fri, 30 Jan 2015 09:56:01 -0200 Subject: qlge: Fix qlge_update_hw_vlan_features to handle if interface is down Currently qlge_update_hw_vlan_features() will always first put the interface down, then update features and then bring it up again. But it is possible to hit this code while the adapter is down and this causes a non-paired call to napi_disable(), which will get stuck. This patch fixes it by skipping these down/up actions if the interface is already down. Fixes: a45adbe8d352 ("qlge: Enhance nested VLAN (Q-in-Q) handling.") Cc: Harish Patil Signed-off-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlge/qlge_main.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index 6c904a6cad2a..ef5aed3b1225 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -2351,23 +2351,29 @@ static int qlge_update_hw_vlan_features(struct net_device *ndev, { struct ql_adapter *qdev = netdev_priv(ndev); int status = 0; + bool need_restart = netif_running(ndev); - status = ql_adapter_down(qdev); - if (status) { - netif_err(qdev, link, qdev->ndev, - "Failed to bring down the adapter\n"); - return status; + if (need_restart) { + status = ql_adapter_down(qdev); + if (status) { + netif_err(qdev, link, qdev->ndev, + "Failed to bring down the adapter\n"); + return status; + } } /* update the features with resent change */ ndev->features = features; - status = ql_adapter_up(qdev); - if (status) { - netif_err(qdev, link, qdev->ndev, - "Failed to bring up the adapter\n"); - return status; + if (need_restart) { + status = ql_adapter_up(qdev); + if (status) { + netif_err(qdev, link, qdev->ndev, + "Failed to bring up the adapter\n"); + return status; + } } + return status; } -- cgit v1.2.3 From 44ba582beac4ff8e05a15e38548ebf3deb509547 Mon Sep 17 00:00:00 2001 From: David L Stevens Date: Fri, 30 Jan 2015 12:29:45 -0500 Subject: sunvnet: set queue mapping when doing packet copies This patch fixes a bug where vnet_skb_shape() didn't set the already-selected queue mapping when a packet copy was required. This results in using the wrong queue index for stops/starts, hung tx queues and watchdog timeouts under heavy load. Signed-off-by: David L Stevens Acked-by: Sowmini Varadhan Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sunvnet.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index d2835bf7b4fb..3699b98d5b2c 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -1119,6 +1119,7 @@ static inline struct sk_buff *vnet_skb_shape(struct sk_buff *skb, int ncookies) skb_shinfo(nskb)->gso_size = skb_shinfo(skb)->gso_size; skb_shinfo(nskb)->gso_type = skb_shinfo(skb)->gso_type; } + nskb->queue_mapping = skb->queue_mapping; dev_kfree_skb(skb); skb = nskb; } -- cgit v1.2.3 From c101cff9010083a8796353a75673fd100b077b79 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 1 Feb 2015 23:54:25 +0300 Subject: isdn: off by one in connect_res() The bug here is that we use "Reject" as the index into the cau_t[] array in the else path. Since the cau_t[] has 9 elements if Reject == 9 then we are reading beyond the end of the array. My understanding of the code is that it's saying that if Reject is 1 or too high then that's invalid and we should hang up. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/isdn/hardware/eicon/message.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c index 0b380603a578..d7c286656a25 100644 --- a/drivers/isdn/hardware/eicon/message.c +++ b/drivers/isdn/hardware/eicon/message.c @@ -1474,7 +1474,7 @@ static byte connect_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a, add_ai(plci, &parms[5]); sig_req(plci, REJECT, 0); } - else if (Reject == 1 || Reject > 9) + else if (Reject == 1 || Reject >= 9) { add_ai(plci, &parms[5]); sig_req(plci, HANGUP, 0); -- cgit v1.2.3 From 5a2e87b16875f9b83b7e9494cf1fce8e17dc764a Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 2 Feb 2015 15:18:42 +0200 Subject: net/mlx4_core: Fix kernel Oops (mem corruption) when working with more than 80 VFs Commit de966c592802 (net/mlx4_core: Support more than 64 VFs) was meant to allow up to 126 VFs. However, due to leaving MLX4_MFUNC_MAX too low, using more than 80 VFs resulted in memory corruptions (and Oopses) when more than 80 VFs were requested. In addition, the number of slaves was left too high. This commit fixes these issues. Fixes: de966c592802 ("net/mlx4_core: Support more than 64 VFs") Signed-off-by: Jack Morgenstein Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/mlx4.h | 3 ++- include/linux/mlx4/device.h | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index bdd4eea2247c..210691c89b6c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -235,7 +235,8 @@ do { \ extern int mlx4_log_num_mgm_entry_size; extern int log_mtts_per_seg; -#define MLX4_MAX_NUM_SLAVES (MLX4_MAX_NUM_PF + MLX4_MAX_NUM_VF) +#define MLX4_MAX_NUM_SLAVES (min(MLX4_MAX_NUM_PF + MLX4_MAX_NUM_VF, \ + MLX4_MFUNC_MAX)) #define ALL_SLAVES 0xff struct mlx4_bitmap { diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 25c791e295fd..5f3a9aa7225d 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -97,7 +97,7 @@ enum { MLX4_MAX_NUM_PF = 16, MLX4_MAX_NUM_VF = 126, MLX4_MAX_NUM_VF_P_PORT = 64, - MLX4_MFUNC_MAX = 80, + MLX4_MFUNC_MAX = 128, MLX4_MAX_EQ_NUM = 1024, MLX4_MFUNC_EQ_NUM = 4, MLX4_MFUNC_MAX_EQES = 8, -- cgit v1.2.3 From 42b5212fee4f57907e9415b18fe19c13e65574bc Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Mon, 2 Feb 2015 16:57:51 +0000 Subject: xen-netback: stop the guest rx thread after a fatal error After commit e9d8b2c2968499c1f96563e6522c56958d5a1d0d (xen-netback: disable rogue vif in kthread context), a fatal (protocol) error would leave the guest Rx thread spinning, wasting CPU time. Commit ecf08d2dbb96d5a4b4bcc53a39e8d29cc8fef02e (xen-netback: reintroduce guest Rx stall detection) made this even worse by removing a cond_resched() from this path. Since a fatal error is non-recoverable, just allow the guest Rx thread to exit. This requires taking additional refs to the task so the thread exiting early is handled safely. Signed-off-by: David Vrabel Reported-by: Julien Grall Tested-by: Julien Grall Acked-by: Wei Liu Signed-off-by: David S. Miller --- drivers/net/xen-netback/interface.c | 2 ++ drivers/net/xen-netback/netback.c | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index 9259a732e8a4..037f74f0fcf6 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -578,6 +578,7 @@ int xenvif_connect(struct xenvif_queue *queue, unsigned long tx_ring_ref, goto err_rx_unbind; } queue->task = task; + get_task_struct(task); task = kthread_create(xenvif_dealloc_kthread, (void *)queue, "%s-dealloc", queue->name); @@ -634,6 +635,7 @@ void xenvif_disconnect(struct xenvif *vif) if (queue->task) { kthread_stop(queue->task); + put_task_struct(queue->task); queue->task = NULL; } diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 908e65e9b821..c8ce701a7efb 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -2109,8 +2109,7 @@ int xenvif_kthread_guest_rx(void *data) */ if (unlikely(vif->disabled && queue->id == 0)) { xenvif_carrier_off(vif); - xenvif_rx_queue_purge(queue); - continue; + break; } if (!skb_queue_empty(&queue->rx_queue)) -- cgit v1.2.3 From 72f6510745592c87f612f62ae4f16bb002934df4 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 3 Feb 2015 16:36:16 -0500 Subject: Revert "drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets" This reverts commit 5188cd44c55db3e92cd9e77a40b5baa7ed4340f7. Now that GSO layer can track if fragment id has been selected and can allocate one if necessary, we don't need to do this in tap and macvtap. This reverts most of the code and only keeps the new ipv6 fragment id generation function that is still needed. Fixes: 3d0ad09412ff (drivers/net: Disable UFO through virtio) Signed-off-by: Vladislav Yasevich Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 3 --- drivers/net/tun.c | 6 +----- 2 files changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 7df221788cd4..0b86e46c130b 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -17,7 +17,6 @@ #include #include -#include #include #include #include @@ -589,8 +588,6 @@ static int macvtap_skb_from_vnet_hdr(struct macvtap_queue *q, pr_warn_once("macvtap: %s: using disabled UFO feature; please fix this program\n", current->comm); gso_type = SKB_GSO_UDP; - if (skb->protocol == htons(ETH_P_IPV6)) - ipv6_proxy_select_ident(skb); break; default: return -EINVAL; diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 8c8dc16839a7..5ca42b79b16f 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -65,7 +65,6 @@ #include #include #include -#include #include #include #include @@ -1167,8 +1166,6 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, break; } - skb_reset_network_header(skb); - if (gso.gso_type != VIRTIO_NET_HDR_GSO_NONE) { pr_debug("GSO!\n"); switch (gso.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) { @@ -1189,8 +1186,6 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, current->comm); } skb_shinfo(skb)->gso_type = SKB_GSO_UDP; - if (skb->protocol == htons(ETH_P_IPV6)) - ipv6_proxy_select_ident(skb); break; } default: @@ -1221,6 +1216,7 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, skb_shinfo(skb)->tx_flags |= SKBTX_SHARED_FRAG; } + skb_reset_network_header(skb); skb_probe_transport_header(skb, 0); rxhash = skb_get_hash(skb); -- cgit v1.2.3 From e3e3c423f82a415195a7bbbfa619bfa7b20d2db6 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 3 Feb 2015 16:36:17 -0500 Subject: Revert "drivers/net: Disable UFO through virtio" This reverts commit 3d0ad09412ffe00c9afa201d01effdb6023d09b4. Now that GSO functionality can correctly track if the fragment id has been selected and select a fragment id if necessary, we can re-enable UFO on tap/macvap and virtio devices. Signed-off-by: Vladislav Yasevich Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 13 ++++++++----- drivers/net/tun.c | 19 ++++++++----------- drivers/net/virtio_net.c | 24 ++++++++++-------------- 3 files changed, 26 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 0b86e46c130b..919f4fccc322 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -80,7 +80,7 @@ static struct cdev macvtap_cdev; static const struct proto_ops macvtap_socket_ops; #define TUN_OFFLOADS (NETIF_F_HW_CSUM | NETIF_F_TSO_ECN | NETIF_F_TSO | \ - NETIF_F_TSO6) + NETIF_F_TSO6 | NETIF_F_UFO) #define RX_OFFLOADS (NETIF_F_GRO | NETIF_F_LRO) #define TAP_FEATURES (NETIF_F_GSO | NETIF_F_SG) @@ -585,8 +585,6 @@ static int macvtap_skb_from_vnet_hdr(struct macvtap_queue *q, gso_type = SKB_GSO_TCPV6; break; case VIRTIO_NET_HDR_GSO_UDP: - pr_warn_once("macvtap: %s: using disabled UFO feature; please fix this program\n", - current->comm); gso_type = SKB_GSO_UDP; break; default: @@ -633,6 +631,8 @@ static void macvtap_skb_to_vnet_hdr(struct macvtap_queue *q, vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV4; else if (sinfo->gso_type & SKB_GSO_TCPV6) vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV6; + else if (sinfo->gso_type & SKB_GSO_UDP) + vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_UDP; else BUG(); if (sinfo->gso_type & SKB_GSO_TCP_ECN) @@ -962,6 +962,9 @@ static int set_offload(struct macvtap_queue *q, unsigned long arg) if (arg & TUN_F_TSO6) feature_mask |= NETIF_F_TSO6; } + + if (arg & TUN_F_UFO) + feature_mask |= NETIF_F_UFO; } /* tun/tap driver inverts the usage for TSO offloads, where @@ -972,7 +975,7 @@ static int set_offload(struct macvtap_queue *q, unsigned long arg) * When user space turns off TSO, we turn off GSO/LRO so that * user-space will not receive TSO frames. */ - if (feature_mask & (NETIF_F_TSO | NETIF_F_TSO6)) + if (feature_mask & (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_UFO)) features |= RX_OFFLOADS; else features &= ~RX_OFFLOADS; @@ -1087,7 +1090,7 @@ static long macvtap_ioctl(struct file *file, unsigned int cmd, case TUNSETOFFLOAD: /* let the user check for future flags */ if (arg & ~(TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 | - TUN_F_TSO_ECN)) + TUN_F_TSO_ECN | TUN_F_UFO)) return -EINVAL; rtnl_lock(); diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 5ca42b79b16f..10f9e4021b5a 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -186,7 +186,7 @@ struct tun_struct { struct net_device *dev; netdev_features_t set_features; #define TUN_USER_FEATURES (NETIF_F_HW_CSUM|NETIF_F_TSO_ECN|NETIF_F_TSO| \ - NETIF_F_TSO6) + NETIF_F_TSO6|NETIF_F_UFO) int vnet_hdr_sz; int sndbuf; @@ -1176,18 +1176,8 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; break; case VIRTIO_NET_HDR_GSO_UDP: - { - static bool warned; - - if (!warned) { - warned = true; - netdev_warn(tun->dev, - "%s: using disabled UFO feature; please fix this program\n", - current->comm); - } skb_shinfo(skb)->gso_type = SKB_GSO_UDP; break; - } default: tun->dev->stats.rx_frame_errors++; kfree_skb(skb); @@ -1294,6 +1284,8 @@ static ssize_t tun_put_user(struct tun_struct *tun, gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4; else if (sinfo->gso_type & SKB_GSO_TCPV6) gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6; + else if (sinfo->gso_type & SKB_GSO_UDP) + gso.gso_type = VIRTIO_NET_HDR_GSO_UDP; else { pr_err("unexpected GSO type: " "0x%x, gso_size %d, hdr_len %d\n", @@ -1742,6 +1734,11 @@ static int set_offload(struct tun_struct *tun, unsigned long arg) features |= NETIF_F_TSO6; arg &= ~(TUN_F_TSO4|TUN_F_TSO6); } + + if (arg & TUN_F_UFO) { + features |= NETIF_F_UFO; + arg &= ~TUN_F_UFO; + } } /* This gives the user a way to test for new features in future by diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 5ca97713bfb3..059fdf1bf5ee 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -490,17 +490,8 @@ static void receive_buf(struct virtnet_info *vi, struct receive_queue *rq, skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; break; case VIRTIO_NET_HDR_GSO_UDP: - { - static bool warned; - - if (!warned) { - warned = true; - netdev_warn(dev, - "host using disabled UFO feature; please fix it\n"); - } skb_shinfo(skb)->gso_type = SKB_GSO_UDP; break; - } case VIRTIO_NET_HDR_GSO_TCPV6: skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; break; @@ -888,6 +879,8 @@ static int xmit_skb(struct send_queue *sq, struct sk_buff *skb) hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_TCPV4; else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_TCPV6; + else if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP) + hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_UDP; else BUG(); if (skb_shinfo(skb)->gso_type & SKB_GSO_TCP_ECN) @@ -1748,7 +1741,7 @@ static int virtnet_probe(struct virtio_device *vdev) dev->features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST; if (virtio_has_feature(vdev, VIRTIO_NET_F_GSO)) { - dev->hw_features |= NETIF_F_TSO + dev->hw_features |= NETIF_F_TSO | NETIF_F_UFO | NETIF_F_TSO_ECN | NETIF_F_TSO6; } /* Individual feature bits: what can host handle? */ @@ -1758,9 +1751,11 @@ static int virtnet_probe(struct virtio_device *vdev) dev->hw_features |= NETIF_F_TSO6; if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_ECN)) dev->hw_features |= NETIF_F_TSO_ECN; + if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_UFO)) + dev->hw_features |= NETIF_F_UFO; if (gso) - dev->features |= dev->hw_features & NETIF_F_ALL_TSO; + dev->features |= dev->hw_features & (NETIF_F_ALL_TSO|NETIF_F_UFO); /* (!csum && gso) case will be fixed by register_netdev() */ } if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_CSUM)) @@ -1798,7 +1793,8 @@ static int virtnet_probe(struct virtio_device *vdev) /* If we can receive ANY GSO packets, we must allocate large ones. */ if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) || virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6) || - virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN)) + virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN) || + virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_UFO)) vi->big_packets = true; if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF)) @@ -1994,9 +1990,9 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GUEST_CSUM, VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC, - VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_TSO6, + VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6, VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6, - VIRTIO_NET_F_GUEST_ECN, + VIRTIO_NET_F_GUEST_ECN, VIRTIO_NET_F_GUEST_UFO, VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ, VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ, -- cgit v1.2.3 From 06b19b1b178570b3d843306c636cdadb6e36c0a1 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Tue, 3 Feb 2015 05:00:40 +0800 Subject: net: usb: sr9700: Use 'SR_' prefix for the common register macros The commone register macors (e.g. RSR) is too commont to drivers, it may be conflict with the architectures (e.g. xtensa, sh). The related warnings (with allmodconfig under xtensa): CC [M] drivers/net/usb/sr9700.o In file included from drivers/net/usb/sr9700.c:24:0: drivers/net/usb/sr9700.h:65:0: warning: "RSR" redefined #define RSR 0x06 ^ In file included from ./arch/xtensa/include/asm/bitops.h:22:0, from include/linux/bitops.h:36, from include/linux/kernel.h:10, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/net/usb/sr9700.c:13: ./arch/xtensa/include/asm/processor.h:190:0: note: this is the location of the previous definition #define RSR(v,sr) __asm__ __volatile__ ("rsr %0,"__stringify(sr) : "=a"(v)); ^ Signed-off-by: Chen Gang Signed-off-by: David S. Miller --- drivers/net/usb/sr9700.c | 36 +++++++++++++------------- drivers/net/usb/sr9700.h | 66 ++++++++++++++++++++++++------------------------ 2 files changed, 51 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/sr9700.c b/drivers/net/usb/sr9700.c index 99b69af14274..4a1e9c489f1f 100644 --- a/drivers/net/usb/sr9700.c +++ b/drivers/net/usb/sr9700.c @@ -77,7 +77,7 @@ static int wait_phy_eeprom_ready(struct usbnet *dev, int phy) int ret; udelay(1); - ret = sr_read_reg(dev, EPCR, &tmp); + ret = sr_read_reg(dev, SR_EPCR, &tmp); if (ret < 0) return ret; @@ -98,15 +98,15 @@ static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg, mutex_lock(&dev->phy_mutex); - sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); - sr_write_reg(dev, EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR); + sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); + sr_write_reg(dev, SR_EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR); ret = wait_phy_eeprom_ready(dev, phy); if (ret < 0) goto out_unlock; - sr_write_reg(dev, EPCR, 0x0); - ret = sr_read(dev, EPDR, 2, value); + sr_write_reg(dev, SR_EPCR, 0x0); + ret = sr_read(dev, SR_EPDR, 2, value); netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n", phy, reg, *value, ret); @@ -123,19 +123,19 @@ static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg, mutex_lock(&dev->phy_mutex); - ret = sr_write(dev, EPDR, 2, &value); + ret = sr_write(dev, SR_EPDR, 2, &value); if (ret < 0) goto out_unlock; - sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); - sr_write_reg(dev, EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) : + sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); + sr_write_reg(dev, SR_EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) : (EPCR_WEP | EPCR_ERPRW)); ret = wait_phy_eeprom_ready(dev, phy); if (ret < 0) goto out_unlock; - sr_write_reg(dev, EPCR, 0x0); + sr_write_reg(dev, SR_EPCR, 0x0); out_unlock: mutex_unlock(&dev->phy_mutex); @@ -188,7 +188,7 @@ static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc) if (loc == MII_BMSR) { u8 value; - sr_read_reg(dev, NSR, &value); + sr_read_reg(dev, SR_NSR, &value); if (value & NSR_LINKST) rc = 1; } @@ -228,7 +228,7 @@ static u32 sr9700_get_link(struct net_device *netdev) int rc = 0; /* Get the Link Status directly */ - sr_read_reg(dev, NSR, &value); + sr_read_reg(dev, SR_NSR, &value); if (value & NSR_LINKST) rc = 1; @@ -281,8 +281,8 @@ static void sr9700_set_multicast(struct net_device *netdev) } } - sr_write_async(dev, MAR, SR_MCAST_SIZE, hashes); - sr_write_reg_async(dev, RCR, rx_ctl); + sr_write_async(dev, SR_MAR, SR_MCAST_SIZE, hashes); + sr_write_reg_async(dev, SR_RCR, rx_ctl); } static int sr9700_set_mac_address(struct net_device *netdev, void *p) @@ -297,7 +297,7 @@ static int sr9700_set_mac_address(struct net_device *netdev, void *p) } memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); - sr_write_async(dev, PAR, 6, netdev->dev_addr); + sr_write_async(dev, SR_PAR, 6, netdev->dev_addr); return 0; } @@ -340,7 +340,7 @@ static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf) mii->phy_id_mask = 0x1f; mii->reg_num_mask = 0x1f; - sr_write_reg(dev, NCR, NCR_RST); + sr_write_reg(dev, SR_NCR, NCR_RST); udelay(20); /* read MAC @@ -348,17 +348,17 @@ static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf) * EEPROM automatically to PAR. In case there is no EEPROM externally, * a default MAC address is stored in PAR for making chip work properly. */ - if (sr_read(dev, PAR, ETH_ALEN, netdev->dev_addr) < 0) { + if (sr_read(dev, SR_PAR, ETH_ALEN, netdev->dev_addr) < 0) { netdev_err(netdev, "Error reading MAC address\n"); ret = -ENODEV; goto out; } /* power up and reset phy */ - sr_write_reg(dev, PRR, PRR_PHY_RST); + sr_write_reg(dev, SR_PRR, PRR_PHY_RST); /* at least 10ms, here 20ms for safe */ mdelay(20); - sr_write_reg(dev, PRR, 0); + sr_write_reg(dev, SR_PRR, 0); /* at least 1ms, here 2ms for reading right register */ udelay(2 * 1000); diff --git a/drivers/net/usb/sr9700.h b/drivers/net/usb/sr9700.h index fd687c575e74..258b030277e7 100644 --- a/drivers/net/usb/sr9700.h +++ b/drivers/net/usb/sr9700.h @@ -14,13 +14,13 @@ /* sr9700 spec. register table on Linux platform */ /* Network Control Reg */ -#define NCR 0x00 +#define SR_NCR 0x00 #define NCR_RST (1 << 0) #define NCR_LBK (3 << 1) #define NCR_FDX (1 << 3) #define NCR_WAKEEN (1 << 6) /* Network Status Reg */ -#define NSR 0x01 +#define SR_NSR 0x01 #define NSR_RXRDY (1 << 0) #define NSR_RXOV (1 << 1) #define NSR_TX1END (1 << 2) @@ -30,7 +30,7 @@ #define NSR_LINKST (1 << 6) #define NSR_SPEED (1 << 7) /* Tx Control Reg */ -#define TCR 0x02 +#define SR_TCR 0x02 #define TCR_CRC_DIS (1 << 1) #define TCR_PAD_DIS (1 << 2) #define TCR_LC_CARE (1 << 3) @@ -38,7 +38,7 @@ #define TCR_EXCECM (1 << 5) #define TCR_LF_EN (1 << 6) /* Tx Status Reg for Packet Index 1 */ -#define TSR1 0x03 +#define SR_TSR1 0x03 #define TSR1_EC (1 << 2) #define TSR1_COL (1 << 3) #define TSR1_LC (1 << 4) @@ -46,7 +46,7 @@ #define TSR1_LOC (1 << 6) #define TSR1_TLF (1 << 7) /* Tx Status Reg for Packet Index 2 */ -#define TSR2 0x04 +#define SR_TSR2 0x04 #define TSR2_EC (1 << 2) #define TSR2_COL (1 << 3) #define TSR2_LC (1 << 4) @@ -54,7 +54,7 @@ #define TSR2_LOC (1 << 6) #define TSR2_TLF (1 << 7) /* Rx Control Reg*/ -#define RCR 0x05 +#define SR_RCR 0x05 #define RCR_RXEN (1 << 0) #define RCR_PRMSC (1 << 1) #define RCR_RUNT (1 << 2) @@ -62,87 +62,87 @@ #define RCR_DIS_CRC (1 << 4) #define RCR_DIS_LONG (1 << 5) /* Rx Status Reg */ -#define RSR 0x06 +#define SR_RSR 0x06 #define RSR_AE (1 << 2) #define RSR_MF (1 << 6) #define RSR_RF (1 << 7) /* Rx Overflow Counter Reg */ -#define ROCR 0x07 +#define SR_ROCR 0x07 #define ROCR_ROC (0x7F << 0) #define ROCR_RXFU (1 << 7) /* Back Pressure Threshold Reg */ -#define BPTR 0x08 +#define SR_BPTR 0x08 #define BPTR_JPT (0x0F << 0) #define BPTR_BPHW (0x0F << 4) /* Flow Control Threshold Reg */ -#define FCTR 0x09 +#define SR_FCTR 0x09 #define FCTR_LWOT (0x0F << 0) #define FCTR_HWOT (0x0F << 4) /* rx/tx Flow Control Reg */ -#define FCR 0x0A +#define SR_FCR 0x0A #define FCR_FLCE (1 << 0) #define FCR_BKPA (1 << 4) #define FCR_TXPEN (1 << 5) #define FCR_TXPF (1 << 6) #define FCR_TXP0 (1 << 7) /* Eeprom & Phy Control Reg */ -#define EPCR 0x0B +#define SR_EPCR 0x0B #define EPCR_ERRE (1 << 0) #define EPCR_ERPRW (1 << 1) #define EPCR_ERPRR (1 << 2) #define EPCR_EPOS (1 << 3) #define EPCR_WEP (1 << 4) /* Eeprom & Phy Address Reg */ -#define EPAR 0x0C +#define SR_EPAR 0x0C #define EPAR_EROA (0x3F << 0) #define EPAR_PHY_ADR_MASK (0x03 << 6) #define EPAR_PHY_ADR (0x01 << 6) /* Eeprom & Phy Data Reg */ -#define EPDR 0x0D /* 0x0D ~ 0x0E for Data Reg Low & High */ +#define SR_EPDR 0x0D /* 0x0D ~ 0x0E for Data Reg Low & High */ /* Wakeup Control Reg */ -#define WCR 0x0F +#define SR_WCR 0x0F #define WCR_MAGICST (1 << 0) #define WCR_LINKST (1 << 2) #define WCR_MAGICEN (1 << 3) #define WCR_LINKEN (1 << 5) /* Physical Address Reg */ -#define PAR 0x10 /* 0x10 ~ 0x15 6 bytes for PAR */ +#define SR_PAR 0x10 /* 0x10 ~ 0x15 6 bytes for PAR */ /* Multicast Address Reg */ -#define MAR 0x16 /* 0x16 ~ 0x1D 8 bytes for MAR */ +#define SR_MAR 0x16 /* 0x16 ~ 0x1D 8 bytes for MAR */ /* 0x1e unused */ /* Phy Reset Reg */ -#define PRR 0x1F +#define SR_PRR 0x1F #define PRR_PHY_RST (1 << 0) /* Tx sdram Write Pointer Address Low */ -#define TWPAL 0x20 +#define SR_TWPAL 0x20 /* Tx sdram Write Pointer Address High */ -#define TWPAH 0x21 +#define SR_TWPAH 0x21 /* Tx sdram Read Pointer Address Low */ -#define TRPAL 0x22 +#define SR_TRPAL 0x22 /* Tx sdram Read Pointer Address High */ -#define TRPAH 0x23 +#define SR_TRPAH 0x23 /* Rx sdram Write Pointer Address Low */ -#define RWPAL 0x24 +#define SR_RWPAL 0x24 /* Rx sdram Write Pointer Address High */ -#define RWPAH 0x25 +#define SR_RWPAH 0x25 /* Rx sdram Read Pointer Address Low */ -#define RRPAL 0x26 +#define SR_RRPAL 0x26 /* Rx sdram Read Pointer Address High */ -#define RRPAH 0x27 +#define SR_RRPAH 0x27 /* Vendor ID register */ -#define VID 0x28 /* 0x28 ~ 0x29 2 bytes for VID */ +#define SR_VID 0x28 /* 0x28 ~ 0x29 2 bytes for VID */ /* Product ID register */ -#define PID 0x2A /* 0x2A ~ 0x2B 2 bytes for PID */ +#define SR_PID 0x2A /* 0x2A ~ 0x2B 2 bytes for PID */ /* CHIP Revision register */ -#define CHIPR 0x2C +#define SR_CHIPR 0x2C /* 0x2D --> 0xEF unused */ /* USB Device Address */ -#define USBDA 0xF0 +#define SR_USBDA 0xF0 #define USBDA_USBFA (0x7F << 0) /* RX packet Counter Reg */ -#define RXC 0xF1 +#define SR_RXC 0xF1 /* Tx packet Counter & USB Status Reg */ -#define TXC_USBS 0xF2 +#define SR_TXC_USBS 0xF2 #define TXC_USBS_TXC0 (1 << 0) #define TXC_USBS_TXC1 (1 << 1) #define TXC_USBS_TXC2 (1 << 2) @@ -150,7 +150,7 @@ #define TXC_USBS_SUSFLAG (1 << 6) #define TXC_USBS_RXFAULT (1 << 7) /* USB Control register */ -#define USBC 0xF4 +#define SR_USBC 0xF4 #define USBC_EP3NAK (1 << 4) #define USBC_EP3ACK (1 << 5) -- cgit v1.2.3 From 75300ad2d91fac50852dc4123977d55e64c874cc Mon Sep 17 00:00:00 2001 From: Sanjeev Sharma Date: Tue, 3 Feb 2015 13:02:02 +0530 Subject: gianfar: correct the bad expression while writing bit-pattern This patch correct the bad expression while writing the bit-pattern from software's buffer to hardware registers. Signed-off-by: Sanjeev Sharma Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c index 3e1a9c1a67a9..fda12fb32ec7 100644 --- a/drivers/net/ethernet/freescale/gianfar_ethtool.c +++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c @@ -1586,7 +1586,7 @@ static int gfar_write_filer_table(struct gfar_private *priv, return -EBUSY; /* Fill regular entries */ - for (; i < MAX_FILER_IDX - 1 && (tab->fe[i].ctrl | tab->fe[i].ctrl); + for (; i < MAX_FILER_IDX - 1 && (tab->fe[i].ctrl | tab->fe[i].prop); i++) gfar_write_filer(priv, i, tab->fe[i].ctrl, tab->fe[i].prop); /* Fill the rest with fall-troughs */ -- cgit v1.2.3 From 5201aa49b0fc12d9bf911090744ca04066bad4a7 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Tue, 3 Feb 2015 11:07:06 +0200 Subject: vhost/net: fix up num_buffers endian-ness In virtio 1.0 mode, when mergeable buffers are enabled on a big-endian host, num_buffers wasn't byte-swapped correctly, so large incoming packets got corrupted. To fix, fill it in within hdr - this also makes sure it gets the correct type. Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/vhost/net.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index d415d69dc237..9484d5652ca5 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -650,8 +650,10 @@ static void handle_rx(struct vhost_net *net) break; } /* TODO: Should check and handle checksum. */ + + hdr.num_buffers = cpu_to_vhost16(vq, headcount); if (likely(mergeable) && - memcpy_toiovecend(nvq->hdr, (unsigned char *)&headcount, + memcpy_toiovecend(nvq->hdr, (void *)&hdr.num_buffers, offsetof(typeof(hdr), num_buffers), sizeof hdr.num_buffers)) { vq_err(vq, "Failed num_buffers write"); -- cgit v1.2.3 From 211fcf6d2100e625ec1d4a50e8adf67370a37bad Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Tue, 3 Feb 2015 12:49:55 -0600 Subject: amd-xgbe: Adjust for zero-based traffic class count The number of traffic classes reported by the hardware is zero-based so increment the value returned to get an actual count. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index 7bb5f07dbeef..124614096456 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -552,13 +552,14 @@ void xgbe_get_all_hw_features(struct xgbe_prv_data *pdata) break; } - /* The Queue and Channel counts are zero based so increment them + /* The Queue, Channel and TC counts are zero based so increment them * to get the actual number */ hw_feat->rx_q_cnt++; hw_feat->tx_q_cnt++; hw_feat->rx_ch_cnt++; hw_feat->tx_ch_cnt++; + hw_feat->tc_cnt++; DBGPR("<--xgbe_get_all_hw_features\n"); } -- cgit v1.2.3 From cf180b8acf2627fdc9ab472ed0dc565803cd388a Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Tue, 3 Feb 2015 14:14:32 -0600 Subject: amd-xgbe: Set RSS enablement based on hardware features The RSS support requires enablement based on the features reported by the hardware. The setting of this flag is missing. Add support to set the RSS enablement flag based on the reported hardware features. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index 124614096456..e5ffb2ccb67d 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -523,6 +523,7 @@ void xgbe_get_all_hw_features(struct xgbe_prv_data *pdata) hw_feat->sph = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, SPHEN); hw_feat->tso = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, TSOEN); hw_feat->dma_debug = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, DBGMEMA); + hw_feat->rss = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, RSSEN); hw_feat->tc_cnt = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, NUMTC); hw_feat->hash_table_size = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, HASHTBLSZ); -- cgit v1.2.3 From f31ec95fa19e07a8beebcc0297284f23aa57967e Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Wed, 4 Feb 2015 05:41:25 -0500 Subject: qlcnic: Fix NAPI poll routine for Tx completion After d75b1ade567f ("net: less interrupt masking in NAPI") driver's NAPI poll routine is expected to return exact budget value if it wants to be re-called. Signed-off-by: Shahed Shaikh Fixes: d75b1ade567f ("net: less interrupt masking in NAPI") Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 27 +++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 18e5de72e9b4..4e1f58cf19ce 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -967,7 +967,12 @@ static int qlcnic_poll(struct napi_struct *napi, int budget) tx_complete = qlcnic_process_cmd_ring(adapter, tx_ring, budget); work_done = qlcnic_process_rcv_ring(sds_ring, budget); - if ((work_done < budget) && tx_complete) { + + /* Check if we need a repoll */ + if (!tx_complete) + work_done = budget; + + if (work_done < budget) { napi_complete(&sds_ring->napi); if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) { qlcnic_enable_sds_intr(adapter, sds_ring); @@ -992,6 +997,9 @@ static int qlcnic_tx_poll(struct napi_struct *napi, int budget) napi_complete(&tx_ring->napi); if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) qlcnic_enable_tx_intr(adapter, tx_ring); + } else { + /* As qlcnic_process_cmd_ring() returned 0, we need a repoll*/ + work_done = budget; } return work_done; @@ -1950,7 +1958,12 @@ static int qlcnic_83xx_msix_sriov_vf_poll(struct napi_struct *napi, int budget) tx_complete = qlcnic_process_cmd_ring(adapter, tx_ring, budget); work_done = qlcnic_83xx_process_rcv_ring(sds_ring, budget); - if ((work_done < budget) && tx_complete) { + + /* Check if we need a repoll */ + if (!tx_complete) + work_done = budget; + + if (work_done < budget) { napi_complete(&sds_ring->napi); qlcnic_enable_sds_intr(adapter, sds_ring); } @@ -1973,7 +1986,12 @@ static int qlcnic_83xx_poll(struct napi_struct *napi, int budget) tx_complete = qlcnic_process_cmd_ring(adapter, tx_ring, budget); work_done = qlcnic_83xx_process_rcv_ring(sds_ring, budget); - if ((work_done < budget) && tx_complete) { + + /* Check if we need a repoll */ + if (!tx_complete) + work_done = budget; + + if (work_done < budget) { napi_complete(&sds_ring->napi); qlcnic_enable_sds_intr(adapter, sds_ring); } @@ -1995,6 +2013,9 @@ static int qlcnic_83xx_msix_tx_poll(struct napi_struct *napi, int budget) napi_complete(&tx_ring->napi); if (test_bit(__QLCNIC_DEV_UP , &adapter->state)) qlcnic_enable_tx_intr(adapter, tx_ring); + } else { + /* need a repoll */ + work_done = budget; } return work_done; -- cgit v1.2.3