From 95ea36275f3c9a1d3d04c217b4b576c657c4e70e Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Tue, 25 Sep 2007 17:57:13 -0700 Subject: [RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville Signed-off-by: David S. Miller --- drivers/net/wireless/Kconfig | 1 + drivers/net/wireless/Makefile | 1 + drivers/net/wireless/rt2x00/Kconfig | 130 ++ drivers/net/wireless/rt2x00/Makefile | 22 + drivers/net/wireless/rt2x00/rt2400pci.c | 1689 +++++++++++++++++ drivers/net/wireless/rt2x00/rt2400pci.h | 943 ++++++++++ drivers/net/wireless/rt2x00/rt2500pci.c | 2000 ++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2500pci.h | 1236 ++++++++++++ drivers/net/wireless/rt2x00/rt2500usb.c | 1837 ++++++++++++++++++ drivers/net/wireless/rt2x00/rt2500usb.h | 798 ++++++++ drivers/net/wireless/rt2x00/rt2x00.h | 807 ++++++++ drivers/net/wireless/rt2x00/rt2x00config.c | 165 ++ drivers/net/wireless/rt2x00/rt2x00debug.c | 331 ++++ drivers/net/wireless/rt2x00/rt2x00debug.h | 57 + drivers/net/wireless/rt2x00/rt2x00dev.c | 1133 +++++++++++ drivers/net/wireless/rt2x00/rt2x00firmware.c | 124 ++ drivers/net/wireless/rt2x00/rt2x00lib.h | 125 ++ drivers/net/wireless/rt2x00/rt2x00mac.c | 459 +++++ drivers/net/wireless/rt2x00/rt2x00pci.c | 481 +++++ drivers/net/wireless/rt2x00/rt2x00pci.h | 127 ++ drivers/net/wireless/rt2x00/rt2x00reg.h | 283 +++ drivers/net/wireless/rt2x00/rt2x00rfkill.c | 148 ++ drivers/net/wireless/rt2x00/rt2x00ring.h | 255 +++ drivers/net/wireless/rt2x00/rt2x00usb.c | 595 ++++++ drivers/net/wireless/rt2x00/rt2x00usb.h | 180 ++ drivers/net/wireless/rt2x00/rt61pci.c | 2603 ++++++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt61pci.h | 1457 ++++++++++++++ drivers/net/wireless/rt2x00/rt73usb.c | 2124 +++++++++++++++++++++ drivers/net/wireless/rt2x00/rt73usb.h | 1024 ++++++++++ 29 files changed, 21135 insertions(+) create mode 100644 drivers/net/wireless/rt2x00/Kconfig create mode 100644 drivers/net/wireless/rt2x00/Makefile create mode 100644 drivers/net/wireless/rt2x00/rt2400pci.c create mode 100644 drivers/net/wireless/rt2x00/rt2400pci.h create mode 100644 drivers/net/wireless/rt2x00/rt2500pci.c create mode 100644 drivers/net/wireless/rt2x00/rt2500pci.h create mode 100644 drivers/net/wireless/rt2x00/rt2500usb.c create mode 100644 drivers/net/wireless/rt2x00/rt2500usb.h create mode 100644 drivers/net/wireless/rt2x00/rt2x00.h create mode 100644 drivers/net/wireless/rt2x00/rt2x00config.c create mode 100644 drivers/net/wireless/rt2x00/rt2x00debug.c create mode 100644 drivers/net/wireless/rt2x00/rt2x00debug.h create mode 100644 drivers/net/wireless/rt2x00/rt2x00dev.c create mode 100644 drivers/net/wireless/rt2x00/rt2x00firmware.c create mode 100644 drivers/net/wireless/rt2x00/rt2x00lib.h create mode 100644 drivers/net/wireless/rt2x00/rt2x00mac.c create mode 100644 drivers/net/wireless/rt2x00/rt2x00pci.c create mode 100644 drivers/net/wireless/rt2x00/rt2x00pci.h create mode 100644 drivers/net/wireless/rt2x00/rt2x00reg.h create mode 100644 drivers/net/wireless/rt2x00/rt2x00rfkill.c create mode 100644 drivers/net/wireless/rt2x00/rt2x00ring.h create mode 100644 drivers/net/wireless/rt2x00/rt2x00usb.c create mode 100644 drivers/net/wireless/rt2x00/rt2x00usb.h create mode 100644 drivers/net/wireless/rt2x00/rt61pci.c create mode 100644 drivers/net/wireless/rt2x00/rt61pci.h create mode 100644 drivers/net/wireless/rt2x00/rt73usb.c create mode 100644 drivers/net/wireless/rt2x00/rt73usb.h (limited to 'drivers') diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 085ba132835f..f481c757e22b 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -583,5 +583,6 @@ source "drivers/net/wireless/bcm43xx/Kconfig" source "drivers/net/wireless/b43/Kconfig" source "drivers/net/wireless/b43legacy/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig" +source "drivers/net/wireless/rt2x00/Kconfig" endmenu diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 351024f2fe72..a7a15e3509e8 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -53,3 +53,4 @@ obj-$(CONFIG_RTL8187) += rtl8187.o obj-$(CONFIG_ADM8211) += adm8211.o obj-$(CONFIG_IWLWIFI) += iwlwifi/ +obj-$(CONFIG_RT2X00) += rt2x00/ diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig new file mode 100644 index 000000000000..da05b1faf60d --- /dev/null +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -0,0 +1,130 @@ +config RT2X00 + tristate "Ralink driver support" + depends on MAC80211 && WLAN_80211 && EXPERIMENTAL + ---help--- + This will enable the experimental support for the Ralink drivers, + developed in the rt2x00 project . + + These drivers will make use of the Devicescape ieee80211 stack. + + When building one of the individual drivers, the rt2x00 library + will also be created. That library (when the driver is built as + a module) will be called "rt2x00lib.ko". + +config RT2X00_LIB + tristate + depends on RT2X00 + +config RT2X00_LIB_PCI + tristate + depends on RT2X00 + select RT2X00_LIB + +config RT2X00_LIB_USB + tristate + depends on RT2X00 + select RT2X00_LIB + +config RT2X00_LIB_FIRMWARE + boolean + depends on RT2X00_LIB + select CRC_ITU_T + select FW_LOADER + +config RT2X00_LIB_RFKILL + boolean + depends on RT2X00_LIB + select RFKILL + select INPUT_POLLDEV + +config RT2400PCI + tristate "Ralink rt2400 pci/pcmcia support" + depends on RT2X00 && PCI + select RT2X00_LIB_PCI + select EEPROM_93CX6 + ---help--- + This is an experimental driver for the Ralink rt2400 wireless chip. + + When compiled as a module, this driver will be called "rt2400pci.ko". + +config RT2400PCI_RFKILL + bool "RT2400 rfkill support" + depends on RT2400PCI + select RT2X00_LIB_RFKILL + ---help--- + This adds support for integrated rt2400 devices that feature a + hardware button to control the radio state. + This feature depends on the RF switch subsystem rfkill. + +config RT2500PCI + tristate "Ralink rt2500 pci/pcmcia support" + depends on RT2X00 && PCI + select RT2X00_LIB_PCI + select EEPROM_93CX6 + ---help--- + This is an experimental driver for the Ralink rt2500 wireless chip. + + When compiled as a module, this driver will be called "rt2500pci.ko". + +config RT2500PCI_RFKILL + bool "RT2500 rfkill support" + depends on RT2500PCI + select RT2X00_LIB_RFKILL + ---help--- + This adds support for integrated rt2500 devices that feature a + hardware button to control the radio state. + This feature depends on the RF switch subsystem rfkill. + +config RT61PCI + tristate "Ralink rt61 pci/pcmcia support" + depends on RT2X00 && PCI + select RT2X00_LIB_PCI + select RT2X00_LIB_FIRMWARE + select EEPROM_93CX6 + ---help--- + This is an experimental driver for the Ralink rt61 wireless chip. + + When compiled as a module, this driver will be called "rt61pci.ko". + +config RT61PCI_RFKILL + bool "RT61 rfkill support" + depends on RT61PCI + select RT2X00_LIB_RFKILL + ---help--- + This adds support for integrated rt61 devices that feature a + hardware button to control the radio state. + This feature depends on the RF switch subsystem rfkill. + +config RT2500USB + tristate "Ralink rt2500 usb support" + depends on RT2X00 && USB + select RT2X00_LIB_USB + ---help--- + This is an experimental driver for the Ralink rt2500 wireless chip. + + When compiled as a module, this driver will be called "rt2500usb.ko". + +config RT73USB + tristate "Ralink rt73 usb support" + depends on RT2X00 && USB + select RT2X00_LIB_USB + select RT2X00_LIB_FIRMWARE + ---help--- + This is an experimental driver for the Ralink rt73 wireless chip. + + When compiled as a module, this driver will be called "rt73usb.ko". + +config RT2X00_LIB_DEBUGFS + bool "Ralink debugfs support" + depends on RT2X00_LIB && MAC80211_DEBUGFS + ---help--- + Enable creation of debugfs files for the rt2x00 drivers. + These debugfs files support both reading and writing of the + most important register types of the rt2x00 devices. + +config RT2X00_DEBUG + bool "Ralink debug output" + depends on RT2X00_LIB + ---help--- + Enable debugging output for all rt2x00 modules + diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile new file mode 100644 index 000000000000..30d654a42eea --- /dev/null +++ b/drivers/net/wireless/rt2x00/Makefile @@ -0,0 +1,22 @@ +rt2x00lib-objs := rt2x00dev.o rt2x00mac.o rt2x00config.o + +ifeq ($(CONFIG_RT2X00_LIB_DEBUGFS),y) + rt2x00lib-objs += rt2x00debug.o +endif + +ifeq ($(CONFIG_RT2X00_LIB_RFKILL),y) + rt2x00lib-objs += rt2x00rfkill.o +endif + +ifeq ($(CONFIG_RT2X00_LIB_FIRMWARE),y) + rt2x00lib-objs += rt2x00firmware.o +endif + +obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o +obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o +obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o +obj-$(CONFIG_RT2400PCI) += rt2400pci.o +obj-$(CONFIG_RT2500PCI) += rt2500pci.o +obj-$(CONFIG_RT61PCI) += rt61pci.o +obj-$(CONFIG_RT2500USB) += rt2500usb.o +obj-$(CONFIG_RT73USB) += rt73usb.o diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c new file mode 100644 index 000000000000..38e2188937c5 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -0,0 +1,1689 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2400pci + Abstract: rt2400pci device specific routines. + Supported chipsets: RT2460. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt2400pci" + +#include +#include +#include +#include +#include +#include +#include + +#include "rt2x00.h" +#include "rt2x00pci.h" +#include "rt2400pci.h" + +/* + * Register access. + * All access to the CSR registers will go through the methods + * rt2x00pci_register_read and rt2x00pci_register_write. + * BBP and RF register require indirect register access, + * and use the CSR registers BBPCSR and RFCSR to achieve this. + * These indirect registers work with busy bits, + * and we will try maximal REGISTER_BUSY_COUNT times to access + * the register while taking a REGISTER_BUSY_DELAY us delay + * between each attampt. When the busy bit is still set at that time, + * the access attempt is considered to have failed, + * and we will print an error. + */ +static u32 rt2400pci_bbp_check(const struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + unsigned int i; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00pci_register_read(rt2x00dev, BBPCSR, ®); + if (!rt2x00_get_field32(reg, BBPCSR_BUSY)) + break; + udelay(REGISTER_BUSY_DELAY); + } + + return reg; +} + +static void rt2400pci_bbp_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u32 reg; + + /* + * Wait until the BBP becomes ready. + */ + reg = rt2400pci_bbp_check(rt2x00dev); + if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { + ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n"); + return; + } + + /* + * Write the data into the BBP. + */ + reg = 0; + rt2x00_set_field32(®, BBPCSR_VALUE, value); + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); + + rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); +} + +static void rt2400pci_bbp_read(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u8 *value) +{ + u32 reg; + + /* + * Wait until the BBP becomes ready. + */ + reg = rt2400pci_bbp_check(rt2x00dev); + if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { + ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); + return; + } + + /* + * Write the request into the BBP. + */ + reg = 0; + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); + + rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); + + /* + * Wait until the BBP becomes ready. + */ + reg = rt2400pci_bbp_check(rt2x00dev); + if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { + ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); + *value = 0xff; + return; + } + + *value = rt2x00_get_field32(reg, BBPCSR_VALUE); +} + +static void rt2400pci_rf_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) +{ + u32 reg; + unsigned int i; + + if (!word) + return; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00pci_register_read(rt2x00dev, RFCSR, ®); + if (!rt2x00_get_field32(reg, RFCSR_BUSY)) + goto rf_write; + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n"); + return; + +rf_write: + reg = 0; + rt2x00_set_field32(®, RFCSR_VALUE, value); + rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); + rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); + rt2x00_set_field32(®, RFCSR_BUSY, 1); + + rt2x00pci_register_write(rt2x00dev, RFCSR, reg); + rt2x00_rf_write(rt2x00dev, word, value); +} + +static void rt2400pci_eepromregister_read(struct eeprom_93cx6 *eeprom) +{ + struct rt2x00_dev *rt2x00dev = eeprom->data; + u32 reg; + + rt2x00pci_register_read(rt2x00dev, CSR21, ®); + + eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN); + eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT); + eeprom->reg_data_clock = + !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK); + eeprom->reg_chip_select = + !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT); +} + +static void rt2400pci_eepromregister_write(struct eeprom_93cx6 *eeprom) +{ + struct rt2x00_dev *rt2x00dev = eeprom->data; + u32 reg = 0; + + rt2x00_set_field32(®, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in); + rt2x00_set_field32(®, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out); + rt2x00_set_field32(®, CSR21_EEPROM_DATA_CLOCK, + !!eeprom->reg_data_clock); + rt2x00_set_field32(®, CSR21_EEPROM_CHIP_SELECT, + !!eeprom->reg_chip_select); + + rt2x00pci_register_write(rt2x00dev, CSR21, reg); +} + +#ifdef CONFIG_RT2X00_LIB_DEBUGFS +#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) + +static void rt2400pci_read_csr(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u32 *data) +{ + rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data); +} + +static void rt2400pci_write_csr(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u32 data) +{ + rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data); +} + +static const struct rt2x00debug rt2400pci_rt2x00debug = { + .owner = THIS_MODULE, + .csr = { + .read = rt2400pci_read_csr, + .write = rt2400pci_write_csr, + .word_size = sizeof(u32), + .word_count = CSR_REG_SIZE / sizeof(u32), + }, + .eeprom = { + .read = rt2x00_eeprom_read, + .write = rt2x00_eeprom_write, + .word_size = sizeof(u16), + .word_count = EEPROM_SIZE / sizeof(u16), + }, + .bbp = { + .read = rt2400pci_bbp_read, + .write = rt2400pci_bbp_write, + .word_size = sizeof(u8), + .word_count = BBP_SIZE / sizeof(u8), + }, + .rf = { + .read = rt2x00_rf_read, + .write = rt2400pci_rf_write, + .word_size = sizeof(u32), + .word_count = RF_SIZE / sizeof(u32), + }, +}; +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + +#ifdef CONFIG_RT2400PCI_RFKILL +static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®); + return rt2x00_get_field32(reg, GPIOCSR_BIT0); +} +#endif /* CONFIG_RT2400PCI_RFKILL */ + +/* + * Configuration handlers. + */ +static void rt2400pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr) +{ + __le32 reg[2]; + + memset(®, 0, sizeof(reg)); + memcpy(®, addr, ETH_ALEN); + + /* + * The MAC address is passed to us as an array of bytes, + * that array is little endian, so no need for byte ordering. + */ + rt2x00pci_register_multiwrite(rt2x00dev, CSR3, ®, sizeof(reg)); +} + +static void rt2400pci_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid) +{ + __le32 reg[2]; + + memset(®, 0, sizeof(reg)); + memcpy(®, bssid, ETH_ALEN); + + /* + * The BSSID is passed to us as an array of bytes, + * that array is little endian, so no need for byte ordering. + */ + rt2x00pci_register_multiwrite(rt2x00dev, CSR5, ®, sizeof(reg)); +} + +static void rt2400pci_config_packet_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter) +{ + int promisc = !!(filter & IFF_PROMISC); + u32 reg; + + rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); + rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, !promisc); + rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); +} + +static void rt2400pci_config_type(struct rt2x00_dev *rt2x00dev, int type) +{ + u32 reg; + + rt2x00pci_register_write(rt2x00dev, CSR14, 0); + + /* + * Apply hardware packet filter. + */ + rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); + + if (!is_monitor_present(&rt2x00dev->interface) && + (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA)) + rt2x00_set_field32(®, RXCSR0_DROP_TODS, 1); + else + rt2x00_set_field32(®, RXCSR0_DROP_TODS, 0); + + /* + * If there is a non-monitor interface present + * the packet should be strict (even if a monitor interface is present!). + * When there is only 1 interface present which is in monitor mode + * we should start accepting _all_ frames. + */ + if (is_interface_present(&rt2x00dev->interface)) { + rt2x00_set_field32(®, RXCSR0_DROP_CRC, 1); + rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, 1); + rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, 1); + rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); + } else if (is_monitor_present(&rt2x00dev->interface)) { + rt2x00_set_field32(®, RXCSR0_DROP_CRC, 0); + rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, 0); + rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, 0); + rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 0); + } + + rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); + + /* + * Enable beacon config + */ + rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®); + rt2x00_set_field32(®, BCNCSR1_PRELOAD, + PREAMBLE + get_duration(IEEE80211_HEADER, 2)); + rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg); + + /* + * Enable synchronisation. + */ + rt2x00pci_register_read(rt2x00dev, CSR14, ®); + if (is_interface_present(&rt2x00dev->interface)) { + rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); + rt2x00_set_field32(®, CSR14_TBCN, 1); + } + + rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); + if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP) + rt2x00_set_field32(®, CSR14_TSF_SYNC, 2); + else if (type == IEEE80211_IF_TYPE_STA) + rt2x00_set_field32(®, CSR14_TSF_SYNC, 1); + else if (is_monitor_present(&rt2x00dev->interface) && + !is_interface_present(&rt2x00dev->interface)) + rt2x00_set_field32(®, CSR14_TSF_SYNC, 0); + + rt2x00pci_register_write(rt2x00dev, CSR14, reg); +} + +static void rt2400pci_config_rate(struct rt2x00_dev *rt2x00dev, const int rate) +{ + struct ieee80211_conf *conf = &rt2x00dev->hw->conf; + u32 reg; + u32 preamble; + u16 value; + + if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE)) + preamble = SHORT_PREAMBLE; + else + preamble = PREAMBLE; + + reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK; + rt2x00pci_register_write(rt2x00dev, ARCSR1, reg); + + rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); + value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ? + SHORT_DIFS : DIFS) + + PLCP + preamble + get_duration(ACK_SIZE, 10); + rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, value); + value = SIFS + PLCP + preamble + get_duration(ACK_SIZE, 10); + rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, value); + rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); + + preamble = DEVICE_GET_RATE_FIELD(rate, PREAMBLE) ? 0x08 : 0x00; + + rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); + rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00 | preamble); + rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10)); + rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR3, ®); + rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble); + rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20)); + rt2x00pci_register_write(rt2x00dev, ARCSR3, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR4, ®); + rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble); + rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55)); + rt2x00pci_register_write(rt2x00dev, ARCSR4, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR5, ®); + rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble); + rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); + rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110)); + rt2x00pci_register_write(rt2x00dev, ARCSR5, reg); +} + +static void rt2400pci_config_phymode(struct rt2x00_dev *rt2x00dev, + const int phymode) +{ + struct ieee80211_hw_mode *mode; + struct ieee80211_rate *rate; + + rt2x00dev->curr_hwmode = HWMODE_B; + + mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode]; + rate = &mode->rates[mode->num_rates - 1]; + + rt2400pci_config_rate(rt2x00dev, rate->val2); +} + +static void rt2400pci_config_channel(struct rt2x00_dev *rt2x00dev, + const int index, const int channel) +{ + struct rf_channel reg; + + /* + * Fill rf_reg structure. + */ + memcpy(®, &rt2x00dev->spec.channels[index], sizeof(reg)); + + /* + * Switch on tuning bits. + */ + rt2x00_set_field32(®.rf1, RF1_TUNER, 1); + rt2x00_set_field32(®.rf3, RF3_TUNER, 1); + + rt2400pci_rf_write(rt2x00dev, 1, reg.rf1); + rt2400pci_rf_write(rt2x00dev, 2, reg.rf2); + rt2400pci_rf_write(rt2x00dev, 3, reg.rf3); + + /* + * RF2420 chipset don't need any additional actions. + */ + if (rt2x00_rf(&rt2x00dev->chip, RF2420)) + return; + + /* + * For the RT2421 chipsets we need to write an invalid + * reference clock rate to activate auto_tune. + * After that we set the value back to the correct channel. + */ + rt2400pci_rf_write(rt2x00dev, 1, reg.rf1); + rt2400pci_rf_write(rt2x00dev, 2, 0x000c2a32); + rt2400pci_rf_write(rt2x00dev, 3, reg.rf3); + + msleep(1); + + rt2400pci_rf_write(rt2x00dev, 1, reg.rf1); + rt2400pci_rf_write(rt2x00dev, 2, reg.rf2); + rt2400pci_rf_write(rt2x00dev, 3, reg.rf3); + + msleep(1); + + /* + * Switch off tuning bits. + */ + rt2x00_set_field32(®.rf1, RF1_TUNER, 0); + rt2x00_set_field32(®.rf3, RF3_TUNER, 0); + + rt2400pci_rf_write(rt2x00dev, 1, reg.rf1); + rt2400pci_rf_write(rt2x00dev, 3, reg.rf3); + + /* + * Clear false CRC during channel switch. + */ + rt2x00pci_register_read(rt2x00dev, CNT0, ®.rf1); +} + +static void rt2400pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower) +{ + rt2400pci_bbp_write(rt2x00dev, 3, TXPOWER_TO_DEV(txpower)); +} + +static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, + int antenna_tx, int antenna_rx) +{ + u8 r1; + u8 r4; + + rt2400pci_bbp_read(rt2x00dev, 4, &r4); + rt2400pci_bbp_read(rt2x00dev, 1, &r1); + + /* + * Configure the TX antenna. + */ + switch (antenna_tx) { + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 1); + break; + case ANTENNA_A: + rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 0); + break; + case ANTENNA_B: + rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 2); + break; + } + + /* + * Configure the RX antenna. + */ + switch (antenna_rx) { + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); + break; + case ANTENNA_A: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 0); + break; + case ANTENNA_B: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); + break; + } + + rt2400pci_bbp_write(rt2x00dev, 4, r4); + rt2400pci_bbp_write(rt2x00dev, 1, r1); +} + +static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev, + int short_slot_time, int beacon_int) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_SLOT_TIME, + short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME); + rt2x00pci_register_write(rt2x00dev, CSR11, reg); + + rt2x00pci_register_read(rt2x00dev, CSR18, ®); + rt2x00_set_field32(®, CSR18_SIFS, SIFS); + rt2x00_set_field32(®, CSR18_PIFS, + short_slot_time ? SHORT_PIFS : PIFS); + rt2x00pci_register_write(rt2x00dev, CSR18, reg); + + rt2x00pci_register_read(rt2x00dev, CSR19, ®); + rt2x00_set_field32(®, CSR19_DIFS, + short_slot_time ? SHORT_DIFS : DIFS); + rt2x00_set_field32(®, CSR19_EIFS, EIFS); + rt2x00pci_register_write(rt2x00dev, CSR19, reg); + + rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); + rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); + rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); + + rt2x00pci_register_read(rt2x00dev, CSR12, ®); + rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, beacon_int * 16); + rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, beacon_int * 16); + rt2x00pci_register_write(rt2x00dev, CSR12, reg); +} + +static void rt2400pci_config(struct rt2x00_dev *rt2x00dev, + const unsigned int flags, + struct ieee80211_conf *conf) +{ + int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME; + + if (flags & CONFIG_UPDATE_PHYMODE) + rt2400pci_config_phymode(rt2x00dev, conf->phymode); + if (flags & CONFIG_UPDATE_CHANNEL) + rt2400pci_config_channel(rt2x00dev, conf->channel_val, + conf->channel); + if (flags & CONFIG_UPDATE_TXPOWER) + rt2400pci_config_txpower(rt2x00dev, conf->power_level); + if (flags & CONFIG_UPDATE_ANTENNA) + rt2400pci_config_antenna(rt2x00dev, conf->antenna_sel_tx, + conf->antenna_sel_rx); + if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) + rt2400pci_config_duration(rt2x00dev, short_slot_time, + conf->beacon_int); +} + +static void rt2400pci_config_cw(struct rt2x00_dev *rt2x00dev, + struct ieee80211_tx_queue_params *params) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_CWMIN, params->cw_min); + rt2x00_set_field32(®, CSR11_CWMAX, params->cw_max); + rt2x00pci_register_write(rt2x00dev, CSR11, reg); +} + +/* + * LED functions. + */ +static void rt2400pci_enable_led(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); + + rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70); + rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30); + + if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) { + rt2x00_set_field32(®, LEDCSR_LINK, 1); + rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0); + } else if (rt2x00dev->led_mode == LED_MODE_ASUS) { + rt2x00_set_field32(®, LEDCSR_LINK, 0); + rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1); + } else { + rt2x00_set_field32(®, LEDCSR_LINK, 1); + rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1); + } + + rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); +} + +static void rt2400pci_disable_led(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); + rt2x00_set_field32(®, LEDCSR_LINK, 0); + rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0); + rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); +} + +/* + * Link tuning + */ +static void rt2400pci_link_stats(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u8 bbp; + + /* + * Update FCS error count from register. + */ + rt2x00pci_register_read(rt2x00dev, CNT0, ®); + rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR); + + /* + * Update False CCA count from register. + */ + rt2400pci_bbp_read(rt2x00dev, 39, &bbp); + rt2x00dev->link.false_cca = bbp; +} + +static void rt2400pci_reset_tuner(struct rt2x00_dev *rt2x00dev) +{ + rt2400pci_bbp_write(rt2x00dev, 13, 0x08); + rt2x00dev->link.vgc_level = 0x08; +} + +static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + u8 reg; + + /* + * The link tuner should not run longer then 60 seconds, + * and should run once every 2 seconds. + */ + if (rt2x00dev->link.count > 60 || !(rt2x00dev->link.count & 1)) + return; + + /* + * Base r13 link tuning on the false cca count. + */ + rt2400pci_bbp_read(rt2x00dev, 13, ®); + + if (rt2x00dev->link.false_cca > 512 && reg < 0x20) { + rt2400pci_bbp_write(rt2x00dev, 13, ++reg); + rt2x00dev->link.vgc_level = reg; + } else if (rt2x00dev->link.false_cca < 100 && reg > 0x08) { + rt2400pci_bbp_write(rt2x00dev, 13, --reg); + rt2x00dev->link.vgc_level = reg; + } +} + +/* + * Initialization functions. + */ +static void rt2400pci_init_rxring(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring = rt2x00dev->rx; + struct data_desc *rxd; + unsigned int i; + u32 word; + + memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); + + for (i = 0; i < ring->stats.limit; i++) { + rxd = ring->entry[i].priv; + + rt2x00_desc_read(rxd, 2, &word); + rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, + ring->data_size); + rt2x00_desc_write(rxd, 2, word); + + rt2x00_desc_read(rxd, 1, &word); + rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, + ring->entry[i].data_dma); + rt2x00_desc_write(rxd, 1, word); + + rt2x00_desc_read(rxd, 0, &word); + rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); + rt2x00_desc_write(rxd, 0, word); + } + + rt2x00_ring_index_clear(rt2x00dev->rx); +} + +static void rt2400pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue) +{ + struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); + struct data_desc *txd; + unsigned int i; + u32 word; + + memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); + + for (i = 0; i < ring->stats.limit; i++) { + txd = ring->entry[i].priv; + + rt2x00_desc_read(txd, 1, &word); + rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, + ring->entry[i].data_dma); + rt2x00_desc_write(txd, 1, word); + + rt2x00_desc_read(txd, 2, &word); + rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH, + ring->data_size); + rt2x00_desc_write(txd, 2, word); + + rt2x00_desc_read(txd, 0, &word); + rt2x00_set_field32(&word, TXD_W0_VALID, 0); + rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); + rt2x00_desc_write(txd, 0, word); + } + + rt2x00_ring_index_clear(ring); +} + +static int rt2400pci_init_rings(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + /* + * Initialize rings. + */ + rt2400pci_init_rxring(rt2x00dev); + rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); + rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); + rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON); + rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + + /* + * Initialize registers. + */ + rt2x00pci_register_read(rt2x00dev, TXCSR2, ®); + rt2x00_set_field32(®, TXCSR2_TXD_SIZE, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size); + rt2x00_set_field32(®, TXCSR2_NUM_TXD, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit); + rt2x00_set_field32(®, TXCSR2_NUM_ATIM, + rt2x00dev->bcn[1].stats.limit); + rt2x00_set_field32(®, TXCSR2_NUM_PRIO, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit); + rt2x00pci_register_write(rt2x00dev, TXCSR2, reg); + + rt2x00pci_register_read(rt2x00dev, TXCSR3, ®); + rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma); + rt2x00pci_register_write(rt2x00dev, TXCSR3, reg); + + rt2x00pci_register_read(rt2x00dev, TXCSR5, ®); + rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma); + rt2x00pci_register_write(rt2x00dev, TXCSR5, reg); + + rt2x00pci_register_read(rt2x00dev, TXCSR4, ®); + rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, + rt2x00dev->bcn[1].data_dma); + rt2x00pci_register_write(rt2x00dev, TXCSR4, reg); + + rt2x00pci_register_read(rt2x00dev, TXCSR6, ®); + rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, + rt2x00dev->bcn[0].data_dma); + rt2x00pci_register_write(rt2x00dev, TXCSR6, reg); + + rt2x00pci_register_read(rt2x00dev, RXCSR1, ®); + rt2x00_set_field32(®, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size); + rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->stats.limit); + rt2x00pci_register_write(rt2x00dev, RXCSR1, reg); + + rt2x00pci_register_read(rt2x00dev, RXCSR2, ®); + rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, + rt2x00dev->rx->data_dma); + rt2x00pci_register_write(rt2x00dev, RXCSR2, reg); + + return 0; +} + +static int rt2400pci_init_registers(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002); + rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002); + rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00023f20); + rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002); + + rt2x00pci_register_read(rt2x00dev, TIMECSR, ®); + rt2x00_set_field32(®, TIMECSR_US_COUNT, 33); + rt2x00_set_field32(®, TIMECSR_US_64_COUNT, 63); + rt2x00_set_field32(®, TIMECSR_BEACON_EXPECT, 0); + rt2x00pci_register_write(rt2x00dev, TIMECSR, reg); + + rt2x00pci_register_read(rt2x00dev, CSR9, ®); + rt2x00_set_field32(®, CSR9_MAX_FRAME_UNIT, + (rt2x00dev->rx->data_size / 128)); + rt2x00pci_register_write(rt2x00dev, CSR9, reg); + + rt2x00pci_register_write(rt2x00dev, CNT3, 0x3f080000); + + rt2x00pci_register_read(rt2x00dev, ARCSR0, ®); + rt2x00_set_field32(®, ARCSR0_AR_BBP_DATA0, 133); + rt2x00_set_field32(®, ARCSR0_AR_BBP_ID0, 134); + rt2x00_set_field32(®, ARCSR0_AR_BBP_DATA1, 136); + rt2x00_set_field32(®, ARCSR0_AR_BBP_ID1, 135); + rt2x00pci_register_write(rt2x00dev, ARCSR0, reg); + + rt2x00pci_register_read(rt2x00dev, RXCSR3, ®); + rt2x00_set_field32(®, RXCSR3_BBP_ID0, 3); /* Tx power.*/ + rt2x00_set_field32(®, RXCSR3_BBP_ID0_VALID, 1); + rt2x00_set_field32(®, RXCSR3_BBP_ID1, 32); /* Signal */ + rt2x00_set_field32(®, RXCSR3_BBP_ID1_VALID, 1); + rt2x00_set_field32(®, RXCSR3_BBP_ID2, 36); /* Rssi */ + rt2x00_set_field32(®, RXCSR3_BBP_ID2_VALID, 1); + rt2x00pci_register_write(rt2x00dev, RXCSR3, reg); + + rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100); + + if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) + return -EBUSY; + + rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00217223); + rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518); + + rt2x00pci_register_read(rt2x00dev, MACCSR2, ®); + rt2x00_set_field32(®, MACCSR2_DELAY, 64); + rt2x00pci_register_write(rt2x00dev, MACCSR2, reg); + + rt2x00pci_register_read(rt2x00dev, RALINKCSR, ®); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA0, 17); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID0, 154); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA1, 0); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID1, 154); + rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg); + + rt2x00pci_register_read(rt2x00dev, CSR1, ®); + rt2x00_set_field32(®, CSR1_SOFT_RESET, 1); + rt2x00_set_field32(®, CSR1_BBP_RESET, 0); + rt2x00_set_field32(®, CSR1_HOST_READY, 0); + rt2x00pci_register_write(rt2x00dev, CSR1, reg); + + rt2x00pci_register_read(rt2x00dev, CSR1, ®); + rt2x00_set_field32(®, CSR1_SOFT_RESET, 0); + rt2x00_set_field32(®, CSR1_HOST_READY, 1); + rt2x00pci_register_write(rt2x00dev, CSR1, reg); + + /* + * We must clear the FCS and FIFO error count. + * These registers are cleared on read, + * so we may pass a useless variable to store the value. + */ + rt2x00pci_register_read(rt2x00dev, CNT0, ®); + rt2x00pci_register_read(rt2x00dev, CNT4, ®); + + return 0; +} + +static int rt2400pci_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2400pci_bbp_read(rt2x00dev, 0, &value); + if ((value != 0xff) && (value != 0x00)) + goto continue_csr_init; + NOTICE(rt2x00dev, "Waiting for BBP register.\n"); + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); + return -EACCES; + +continue_csr_init: + rt2400pci_bbp_write(rt2x00dev, 1, 0x00); + rt2400pci_bbp_write(rt2x00dev, 3, 0x27); + rt2400pci_bbp_write(rt2x00dev, 4, 0x08); + rt2400pci_bbp_write(rt2x00dev, 10, 0x0f); + rt2400pci_bbp_write(rt2x00dev, 15, 0x72); + rt2400pci_bbp_write(rt2x00dev, 16, 0x74); + rt2400pci_bbp_write(rt2x00dev, 17, 0x20); + rt2400pci_bbp_write(rt2x00dev, 18, 0x72); + rt2400pci_bbp_write(rt2x00dev, 19, 0x0b); + rt2400pci_bbp_write(rt2x00dev, 20, 0x00); + rt2400pci_bbp_write(rt2x00dev, 28, 0x11); + rt2400pci_bbp_write(rt2x00dev, 29, 0x04); + rt2400pci_bbp_write(rt2x00dev, 30, 0x21); + rt2400pci_bbp_write(rt2x00dev, 31, 0x00); + + DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); + + if (eeprom != 0xffff && eeprom != 0x0000) { + reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); + value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); + DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", + reg_id, value); + rt2400pci_bbp_write(rt2x00dev, reg_id, value); + } + } + DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); + + return 0; +} + +/* + * Device state switch handlers. + */ +static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); + rt2x00_set_field32(®, RXCSR0_DISABLE_RX, + state == STATE_RADIO_RX_OFF); + rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); +} + +static void rt2400pci_toggle_irq(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int mask = (state == STATE_RADIO_IRQ_OFF); + u32 reg; + + /* + * When interrupts are being enabled, the interrupt registers + * should clear the register to assure a clean state. + */ + if (state == STATE_RADIO_IRQ_ON) { + rt2x00pci_register_read(rt2x00dev, CSR7, ®); + rt2x00pci_register_write(rt2x00dev, CSR7, reg); + } + + /* + * Only toggle the interrupts bits we are going to use. + * Non-checked interrupt bits are disabled by default. + */ + rt2x00pci_register_read(rt2x00dev, CSR8, ®); + rt2x00_set_field32(®, CSR8_TBCN_EXPIRE, mask); + rt2x00_set_field32(®, CSR8_TXDONE_TXRING, mask); + rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, mask); + rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, mask); + rt2x00_set_field32(®, CSR8_RXDONE, mask); + rt2x00pci_register_write(rt2x00dev, CSR8, reg); +} + +static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + /* + * Initialize all registers. + */ + if (rt2400pci_init_rings(rt2x00dev) || + rt2400pci_init_registers(rt2x00dev) || + rt2400pci_init_bbp(rt2x00dev)) { + ERROR(rt2x00dev, "Register initialization failed.\n"); + return -EIO; + } + + /* + * Enable interrupts. + */ + rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); + + /* + * Enable LED + */ + rt2400pci_enable_led(rt2x00dev); + + return 0; +} + +static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + /* + * Disable LED + */ + rt2400pci_disable_led(rt2x00dev); + + rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0); + + /* + * Disable synchronisation. + */ + rt2x00pci_register_write(rt2x00dev, CSR14, 0); + + /* + * Cancel RX and TX. + */ + rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); + rt2x00_set_field32(®, TXCSR0_ABORT, 1); + rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); + + /* + * Disable interrupts. + */ + rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF); +} + +static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + u32 reg; + unsigned int i; + char put_to_sleep; + char bbp_state; + char rf_state; + + put_to_sleep = (state != STATE_AWAKE); + + rt2x00pci_register_read(rt2x00dev, PWRCSR1, ®); + rt2x00_set_field32(®, PWRCSR1_SET_STATE, 1); + rt2x00_set_field32(®, PWRCSR1_BBP_DESIRE_STATE, state); + rt2x00_set_field32(®, PWRCSR1_RF_DESIRE_STATE, state); + rt2x00_set_field32(®, PWRCSR1_PUT_TO_SLEEP, put_to_sleep); + rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg); + + /* + * Device is not guaranteed to be in the requested state yet. + * We must wait until the register indicates that the + * device has entered the correct state. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00pci_register_read(rt2x00dev, PWRCSR1, ®); + bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE); + rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE); + if (bbp_state == state && rf_state == state) + return 0; + msleep(10); + } + + NOTICE(rt2x00dev, "Device failed to enter state %d, " + "current device state: bbp %d and rf %d.\n", + state, bbp_state, rf_state); + + return -EBUSY; +} + +static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int retval = 0; + + switch (state) { + case STATE_RADIO_ON: + retval = rt2400pci_enable_radio(rt2x00dev); + break; + case STATE_RADIO_OFF: + rt2400pci_disable_radio(rt2x00dev); + break; + case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_OFF: + rt2400pci_toggle_rx(rt2x00dev, state); + break; + case STATE_DEEP_SLEEP: + case STATE_SLEEP: + case STATE_STANDBY: + case STATE_AWAKE: + retval = rt2400pci_set_state(rt2x00dev, state); + break; + default: + retval = -ENOTSUPP; + break; + } + + return retval; +} + +/* + * TX descriptor initialization + */ +static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, + struct data_desc *txd, + struct data_entry_desc *desc, + struct ieee80211_hdr *ieee80211hdr, + unsigned int length, + struct ieee80211_tx_control *control) +{ + u32 word; + u32 signal = 0; + u32 service = 0; + u32 length_high = 0; + u32 length_low = 0; + + /* + * The PLCP values should be treated as if they + * were BBP values. + */ + rt2x00_set_field32(&signal, BBPCSR_VALUE, desc->signal); + rt2x00_set_field32(&signal, BBPCSR_REGNUM, 5); + rt2x00_set_field32(&signal, BBPCSR_BUSY, 1); + + rt2x00_set_field32(&service, BBPCSR_VALUE, desc->service); + rt2x00_set_field32(&service, BBPCSR_REGNUM, 6); + rt2x00_set_field32(&service, BBPCSR_BUSY, 1); + + rt2x00_set_field32(&length_high, BBPCSR_VALUE, desc->length_high); + rt2x00_set_field32(&length_high, BBPCSR_REGNUM, 7); + rt2x00_set_field32(&length_high, BBPCSR_BUSY, 1); + + rt2x00_set_field32(&length_low, BBPCSR_VALUE, desc->length_low); + rt2x00_set_field32(&length_low, BBPCSR_REGNUM, 8); + rt2x00_set_field32(&length_low, BBPCSR_BUSY, 1); + + /* + * Start writing the descriptor words. + */ + rt2x00_desc_read(txd, 2, &word); + rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, length); + rt2x00_desc_write(txd, 2, word); + + rt2x00_desc_read(txd, 3, &word); + rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, signal); + rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, service); + rt2x00_desc_write(txd, 3, word); + + rt2x00_desc_read(txd, 4, &word); + rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_LOW, length_low); + rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_HIGH, length_high); + rt2x00_desc_write(txd, 4, word); + + rt2x00_desc_read(txd, 0, &word); + rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); + rt2x00_set_field32(&word, TXD_W0_VALID, 1); + rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, + test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_ACK, + !(control->flags & IEEE80211_TXCTL_NO_ACK)); + rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_RTS, + test_bit(ENTRY_TXD_RTS_FRAME, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); + rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, + !!(control->flags & + IEEE80211_TXCTL_LONG_RETRY_LIMIT)); + rt2x00_desc_write(txd, 0, word); +} + +/* + * TX data initialization + */ +static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, + unsigned int queue) +{ + u32 reg; + + if (queue == IEEE80211_TX_QUEUE_BEACON) { + rt2x00pci_register_read(rt2x00dev, CSR14, ®); + if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) { + rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); + rt2x00pci_register_write(rt2x00dev, CSR14, reg); + } + return; + } + + rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); + if (queue == IEEE80211_TX_QUEUE_DATA0) + rt2x00_set_field32(®, TXCSR0_KICK_PRIO, 1); + else if (queue == IEEE80211_TX_QUEUE_DATA1) + rt2x00_set_field32(®, TXCSR0_KICK_TX, 1); + else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON) + rt2x00_set_field32(®, TXCSR0_KICK_ATIM, 1); + rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); +} + +/* + * RX control handlers + */ +static int rt2400pci_fill_rxdone(struct data_entry *entry, + int *signal, int *rssi, int *ofdm, int *size) +{ + struct data_desc *rxd = entry->priv; + u32 word0; + u32 word2; + + rt2x00_desc_read(rxd, 0, &word0); + rt2x00_desc_read(rxd, 2, &word2); + + if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) || + rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) + return -EINVAL; + + /* + * Obtain the status about this packet. + */ + *signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); + *rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - + entry->ring->rt2x00dev->rssi_offset; + *ofdm = 0; + *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); + + return 0; +} + +/* + * Interrupt functions. + */ +static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue) +{ + struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); + struct data_entry *entry; + struct data_desc *txd; + u32 word; + int tx_status; + int retry; + + while (!rt2x00_ring_empty(ring)) { + entry = rt2x00_get_data_entry_done(ring); + txd = entry->priv; + rt2x00_desc_read(txd, 0, &word); + + if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || + !rt2x00_get_field32(word, TXD_W0_VALID)) + break; + + /* + * Obtain the status about this packet. + */ + tx_status = rt2x00_get_field32(word, TXD_W0_RESULT); + retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); + + rt2x00lib_txdone(entry, tx_status, retry); + + /* + * Make this entry available for reuse. + */ + entry->flags = 0; + rt2x00_set_field32(&word, TXD_W0_VALID, 0); + rt2x00_desc_write(txd, 0, word); + rt2x00_ring_index_done_inc(ring); + } + + /* + * If the data ring was full before the txdone handler + * we must make sure the packet queue in the mac80211 stack + * is reenabled when the txdone handler has finished. + */ + entry = ring->entry; + if (!rt2x00_ring_full(ring)) + ieee80211_wake_queue(rt2x00dev->hw, + entry->tx_status.control.queue); +} + +static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) +{ + struct rt2x00_dev *rt2x00dev = dev_instance; + u32 reg; + + /* + * Get the interrupt sources & saved to local variable. + * Write register value back to clear pending interrupts. + */ + rt2x00pci_register_read(rt2x00dev, CSR7, ®); + rt2x00pci_register_write(rt2x00dev, CSR7, reg); + + if (!reg) + return IRQ_NONE; + + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return IRQ_HANDLED; + + /* + * Handle interrupts, walk through all bits + * and run the tasks, the bits are checked in order of + * priority. + */ + + /* + * 1 - Beacon timer expired interrupt. + */ + if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE)) + rt2x00lib_beacondone(rt2x00dev); + + /* + * 2 - Rx ring done interrupt. + */ + if (rt2x00_get_field32(reg, CSR7_RXDONE)) + rt2x00pci_rxdone(rt2x00dev); + + /* + * 3 - Atim ring transmit done interrupt. + */ + if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING)) + rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON); + + /* + * 4 - Priority ring transmit done interrupt. + */ + if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING)) + rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); + + /* + * 5 - Tx ring transmit done interrupt. + */ + if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) + rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); + + return IRQ_HANDLED; +} + +/* + * Device probe functions. + */ +static int rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + struct eeprom_93cx6 eeprom; + u32 reg; + u16 word; + u8 *mac; + + rt2x00pci_register_read(rt2x00dev, CSR21, ®); + + eeprom.data = rt2x00dev; + eeprom.register_read = rt2400pci_eepromregister_read; + eeprom.register_write = rt2400pci_eepromregister_write; + eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ? + PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; + eeprom.reg_data_in = 0; + eeprom.reg_data_out = 0; + eeprom.reg_data_clock = 0; + eeprom.reg_chip_select = 0; + + eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, + EEPROM_SIZE / sizeof(u16)); + + /* + * Start validation of the data that has been read. + */ + mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); + if (!is_valid_ether_addr(mac)) { + random_ether_addr(mac); + EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac)); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); + if (word == 0xffff) { + ERROR(rt2x00dev, "Invalid EEPROM data detected.\n"); + return -EINVAL; + } + + return 0; +} + +static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 value; + u16 eeprom; + + /* + * Read EEPROM word for configuration. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + + /* + * Identify RF chipset. + */ + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2x00pci_register_read(rt2x00dev, CSR0, ®); + rt2x00_set_chip(rt2x00dev, RT2460, value, reg); + + if (!rt2x00_rf(&rt2x00dev->chip, RF2420) && + !rt2x00_rf(&rt2x00dev->chip, RF2421)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } + + /* + * Identify default antenna configuration. + */ + rt2x00dev->hw->conf.antenna_sel_tx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); + rt2x00dev->hw->conf.antenna_sel_rx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); + + /* + * Store led mode, for correct led behaviour. + */ + rt2x00dev->led_mode = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); + + /* + * Detect if this device has an hardware controlled radio. + */ + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) + __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags); + + /* + * Check if the BBP tuning should be enabled. + */ + if (!rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING)) + __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); + + return 0; +} + +/* + * RF value list for RF2420 & RF2421 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_bg[] = { + { 1, 0x00022058, 0x000c1fda, 0x00000101, 0 }, + { 2, 0x00022058, 0x000c1fee, 0x00000101, 0 }, + { 3, 0x00022058, 0x000c2002, 0x00000101, 0 }, + { 4, 0x00022058, 0x000c2016, 0x00000101, 0 }, + { 5, 0x00022058, 0x000c202a, 0x00000101, 0 }, + { 6, 0x00022058, 0x000c203e, 0x00000101, 0 }, + { 7, 0x00022058, 0x000c2052, 0x00000101, 0 }, + { 8, 0x00022058, 0x000c2066, 0x00000101, 0 }, + { 9, 0x00022058, 0x000c207a, 0x00000101, 0 }, + { 10, 0x00022058, 0x000c208e, 0x00000101, 0 }, + { 11, 0x00022058, 0x000c20a2, 0x00000101, 0 }, + { 12, 0x00022058, 0x000c20b6, 0x00000101, 0 }, + { 13, 0x00022058, 0x000c20ca, 0x00000101, 0 }, + { 14, 0x00022058, 0x000c20fa, 0x00000101, 0 }, +}; + +static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +{ + struct hw_mode_spec *spec = &rt2x00dev->spec; + u8 *txpower; + unsigned int i; + + /* + * Initialize all hw fields. + */ + rt2x00dev->hw->flags = + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_MONITOR_DURING_OPER | + IEEE80211_HW_NO_PROBE_FILTERING; + rt2x00dev->hw->extra_tx_headroom = 0; + rt2x00dev->hw->max_signal = MAX_SIGNAL; + rt2x00dev->hw->max_rssi = MAX_RX_SSI; + rt2x00dev->hw->queues = 2; + + SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, + rt2x00_eeprom_addr(rt2x00dev, + EEPROM_MAC_ADDR_0)); + + /* + * Convert tx_power array in eeprom. + */ + txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); + for (i = 0; i < 14; i++) + txpower[i] = TXPOWER_FROM_DEV(txpower[i]); + + /* + * Initialize hw_mode information. + */ + spec->num_modes = 1; + spec->num_rates = 4; + spec->tx_power_a = NULL; + spec->tx_power_bg = txpower; + spec->tx_power_default = DEFAULT_TXPOWER; + + spec->num_channels = ARRAY_SIZE(rf_vals_bg); + spec->channels = rf_vals_bg; +} + +static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + int retval; + + /* + * Allocate eeprom data. + */ + retval = rt2400pci_validate_eeprom(rt2x00dev); + if (retval) + return retval; + + retval = rt2400pci_init_eeprom(rt2x00dev); + if (retval) + return retval; + + /* + * Initialize hw specifications. + */ + rt2400pci_probe_hw_mode(rt2x00dev); + + /* + * This device requires the beacon ring + */ + __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags); + + /* + * Set the rssi offset. + */ + rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + + return 0; +} + +/* + * IEEE80211 stack callback functions. + */ +static int rt2400pci_set_retry_limit(struct ieee80211_hw *hw, + u32 short_retry, u32 long_retry) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u32 reg; + + rt2x00pci_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_LONG_RETRY, long_retry); + rt2x00_set_field32(®, CSR11_SHORT_RETRY, short_retry); + rt2x00pci_register_write(rt2x00dev, CSR11, reg); + + return 0; +} + +static int rt2400pci_conf_tx(struct ieee80211_hw *hw, + int queue, + const struct ieee80211_tx_queue_params *params) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * We don't support variating cw_min and cw_max variables + * per queue. So by default we only configure the TX queue, + * and ignore all other configurations. + */ + if (queue != IEEE80211_TX_QUEUE_DATA0) + return -EINVAL; + + if (rt2x00mac_conf_tx(hw, queue, params)) + return -EINVAL; + + /* + * Write configuration to register. + */ + rt2400pci_config_cw(rt2x00dev, &rt2x00dev->tx->tx_params); + + return 0; +} + +static u64 rt2400pci_get_tsf(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u64 tsf; + u32 reg; + + rt2x00pci_register_read(rt2x00dev, CSR17, ®); + tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32; + rt2x00pci_register_read(rt2x00dev, CSR16, ®); + tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER); + + return tsf; +} + +static void rt2400pci_reset_tsf(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + rt2x00pci_register_write(rt2x00dev, CSR16, 0); + rt2x00pci_register_write(rt2x00dev, CSR17, 0); +} + +static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u32 reg; + + rt2x00pci_register_read(rt2x00dev, CSR15, ®); + return rt2x00_get_field32(reg, CSR15_BEACON_SENT); +} + +static const struct ieee80211_ops rt2400pci_mac80211_ops = { + .tx = rt2x00mac_tx, + .add_interface = rt2x00mac_add_interface, + .remove_interface = rt2x00mac_remove_interface, + .config = rt2x00mac_config, + .config_interface = rt2x00mac_config_interface, + .set_multicast_list = rt2x00mac_set_multicast_list, + .get_stats = rt2x00mac_get_stats, + .set_retry_limit = rt2400pci_set_retry_limit, + .conf_tx = rt2400pci_conf_tx, + .get_tx_stats = rt2x00mac_get_tx_stats, + .get_tsf = rt2400pci_get_tsf, + .reset_tsf = rt2400pci_reset_tsf, + .beacon_update = rt2x00pci_beacon_update, + .tx_last_beacon = rt2400pci_tx_last_beacon, +}; + +static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = { + .irq_handler = rt2400pci_interrupt, + .probe_hw = rt2400pci_probe_hw, + .initialize = rt2x00pci_initialize, + .uninitialize = rt2x00pci_uninitialize, + .set_device_state = rt2400pci_set_device_state, +#ifdef CONFIG_RT2400PCI_RFKILL + .rfkill_poll = rt2400pci_rfkill_poll, +#endif /* CONFIG_RT2400PCI_RFKILL */ + .link_stats = rt2400pci_link_stats, + .reset_tuner = rt2400pci_reset_tuner, + .link_tuner = rt2400pci_link_tuner, + .write_tx_desc = rt2400pci_write_tx_desc, + .write_tx_data = rt2x00pci_write_tx_data, + .kick_tx_queue = rt2400pci_kick_tx_queue, + .fill_rxdone = rt2400pci_fill_rxdone, + .config_mac_addr = rt2400pci_config_mac_addr, + .config_bssid = rt2400pci_config_bssid, + .config_packet_filter = rt2400pci_config_packet_filter, + .config_type = rt2400pci_config_type, + .config = rt2400pci_config, +}; + +static const struct rt2x00_ops rt2400pci_ops = { + .name = DRV_NAME, + .rxd_size = RXD_DESC_SIZE, + .txd_size = TXD_DESC_SIZE, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .lib = &rt2400pci_rt2x00_ops, + .hw = &rt2400pci_mac80211_ops, +#ifdef CONFIG_RT2X00_LIB_DEBUGFS + .debugfs = &rt2400pci_rt2x00debug, +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ +}; + +/* + * RT2400pci module information. + */ +static struct pci_device_id rt2400pci_device_table[] = { + { PCI_DEVICE(0x1814, 0x0101), PCI_DEVICE_DATA(&rt2400pci_ops) }, + { 0, } +}; + +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Ralink RT2400 PCI & PCMCIA Wireless LAN driver."); +MODULE_SUPPORTED_DEVICE("Ralink RT2460 PCI & PCMCIA chipset based cards"); +MODULE_DEVICE_TABLE(pci, rt2400pci_device_table); +MODULE_LICENSE("GPL"); + +static struct pci_driver rt2400pci_driver = { + .name = DRV_NAME, + .id_table = rt2400pci_device_table, + .probe = rt2x00pci_probe, + .remove = __devexit_p(rt2x00pci_remove), + .suspend = rt2x00pci_suspend, + .resume = rt2x00pci_resume, +}; + +static int __init rt2400pci_init(void) +{ + return pci_register_driver(&rt2400pci_driver); +} + +static void __exit rt2400pci_exit(void) +{ + pci_unregister_driver(&rt2400pci_driver); +} + +module_init(rt2400pci_init); +module_exit(rt2400pci_exit); diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h new file mode 100644 index 000000000000..ae22501f085d --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -0,0 +1,943 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2400pci + Abstract: Data structures and registers for the rt2400pci module. + Supported chipsets: RT2460. + */ + +#ifndef RT2400PCI_H +#define RT2400PCI_H + +/* + * RF chip defines. + */ +#define RF2420 0x0000 +#define RF2421 0x0001 + +/* + * Signal information. + * Defaul offset is required for RSSI <-> dBm conversion. + */ +#define MAX_SIGNAL 100 +#define MAX_RX_SSI -1 +#define DEFAULT_RSSI_OFFSET 100 + +/* + * Register layout information. + */ +#define CSR_REG_BASE 0x0000 +#define CSR_REG_SIZE 0x014c +#define EEPROM_BASE 0x0000 +#define EEPROM_SIZE 0x0100 +#define BBP_SIZE 0x0020 +#define RF_SIZE 0x0010 + +/* + * Control/Status Registers(CSR). + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * CSR0: ASIC revision number. + */ +#define CSR0 0x0000 + +/* + * CSR1: System control register. + * SOFT_RESET: Software reset, 1: reset, 0: normal. + * BBP_RESET: Hardware reset, 1: reset, 0, release. + * HOST_READY: Host ready after initialization. + */ +#define CSR1 0x0004 +#define CSR1_SOFT_RESET FIELD32(0x00000001) +#define CSR1_BBP_RESET FIELD32(0x00000002) +#define CSR1_HOST_READY FIELD32(0x00000004) + +/* + * CSR2: System admin status register (invalid). + */ +#define CSR2 0x0008 + +/* + * CSR3: STA MAC address register 0. + */ +#define CSR3 0x000c +#define CSR3_BYTE0 FIELD32(0x000000ff) +#define CSR3_BYTE1 FIELD32(0x0000ff00) +#define CSR3_BYTE2 FIELD32(0x00ff0000) +#define CSR3_BYTE3 FIELD32(0xff000000) + +/* + * CSR4: STA MAC address register 1. + */ +#define CSR4 0x0010 +#define CSR4_BYTE4 FIELD32(0x000000ff) +#define CSR4_BYTE5 FIELD32(0x0000ff00) + +/* + * CSR5: BSSID register 0. + */ +#define CSR5 0x0014 +#define CSR5_BYTE0 FIELD32(0x000000ff) +#define CSR5_BYTE1 FIELD32(0x0000ff00) +#define CSR5_BYTE2 FIELD32(0x00ff0000) +#define CSR5_BYTE3 FIELD32(0xff000000) + +/* + * CSR6: BSSID register 1. + */ +#define CSR6 0x0018 +#define CSR6_BYTE4 FIELD32(0x000000ff) +#define CSR6_BYTE5 FIELD32(0x0000ff00) + +/* + * CSR7: Interrupt source register. + * Write 1 to clear interrupt. + * TBCN_EXPIRE: Beacon timer expired interrupt. + * TWAKE_EXPIRE: Wakeup timer expired interrupt. + * TATIMW_EXPIRE: Timer of atim window expired interrupt. + * TXDONE_TXRING: Tx ring transmit done interrupt. + * TXDONE_ATIMRING: Atim ring transmit done interrupt. + * TXDONE_PRIORING: Priority ring transmit done interrupt. + * RXDONE: Receive done interrupt. + */ +#define CSR7 0x001c +#define CSR7_TBCN_EXPIRE FIELD32(0x00000001) +#define CSR7_TWAKE_EXPIRE FIELD32(0x00000002) +#define CSR7_TATIMW_EXPIRE FIELD32(0x00000004) +#define CSR7_TXDONE_TXRING FIELD32(0x00000008) +#define CSR7_TXDONE_ATIMRING FIELD32(0x00000010) +#define CSR7_TXDONE_PRIORING FIELD32(0x00000020) +#define CSR7_RXDONE FIELD32(0x00000040) + +/* + * CSR8: Interrupt mask register. + * Write 1 to mask interrupt. + * TBCN_EXPIRE: Beacon timer expired interrupt. + * TWAKE_EXPIRE: Wakeup timer expired interrupt. + * TATIMW_EXPIRE: Timer of atim window expired interrupt. + * TXDONE_TXRING: Tx ring transmit done interrupt. + * TXDONE_ATIMRING: Atim ring transmit done interrupt. + * TXDONE_PRIORING: Priority ring transmit done interrupt. + * RXDONE: Receive done interrupt. + */ +#define CSR8 0x0020 +#define CSR8_TBCN_EXPIRE FIELD32(0x00000001) +#define CSR8_TWAKE_EXPIRE FIELD32(0x00000002) +#define CSR8_TATIMW_EXPIRE FIELD32(0x00000004) +#define CSR8_TXDONE_TXRING FIELD32(0x00000008) +#define CSR8_TXDONE_ATIMRING FIELD32(0x00000010) +#define CSR8_TXDONE_PRIORING FIELD32(0x00000020) +#define CSR8_RXDONE FIELD32(0x00000040) + +/* + * CSR9: Maximum frame length register. + * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12. + */ +#define CSR9 0x0024 +#define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80) + +/* + * CSR11: Back-off control register. + * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1). + * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1). + * SLOT_TIME: Slot time, default is 20us for 802.11b. + * LONG_RETRY: Long retry count. + * SHORT_RETRY: Short retry count. + */ +#define CSR11 0x002c +#define CSR11_CWMIN FIELD32(0x0000000f) +#define CSR11_CWMAX FIELD32(0x000000f0) +#define CSR11_SLOT_TIME FIELD32(0x00001f00) +#define CSR11_LONG_RETRY FIELD32(0x00ff0000) +#define CSR11_SHORT_RETRY FIELD32(0xff000000) + +/* + * CSR12: Synchronization configuration register 0. + * All units in 1/16 TU. + * BEACON_INTERVAL: Beacon interval, default is 100 TU. + * CFPMAX_DURATION: Cfp maximum duration, default is 100 TU. + */ +#define CSR12 0x0030 +#define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff) +#define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000) + +/* + * CSR13: Synchronization configuration register 1. + * All units in 1/16 TU. + * ATIMW_DURATION: Atim window duration. + * CFP_PERIOD: Cfp period, default is 0 TU. + */ +#define CSR13 0x0034 +#define CSR13_ATIMW_DURATION FIELD32(0x0000ffff) +#define CSR13_CFP_PERIOD FIELD32(0x00ff0000) + +/* + * CSR14: Synchronization control register. + * TSF_COUNT: Enable tsf auto counting. + * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. + * TBCN: Enable tbcn with reload value. + * TCFP: Enable tcfp & cfp / cp switching. + * TATIMW: Enable tatimw & atim window switching. + * BEACON_GEN: Enable beacon generator. + * CFP_COUNT_PRELOAD: Cfp count preload value. + * TBCM_PRELOAD: Tbcn preload value in units of 64us. + */ +#define CSR14 0x0038 +#define CSR14_TSF_COUNT FIELD32(0x00000001) +#define CSR14_TSF_SYNC FIELD32(0x00000006) +#define CSR14_TBCN FIELD32(0x00000008) +#define CSR14_TCFP FIELD32(0x00000010) +#define CSR14_TATIMW FIELD32(0x00000020) +#define CSR14_BEACON_GEN FIELD32(0x00000040) +#define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00) +#define CSR14_TBCM_PRELOAD FIELD32(0xffff0000) + +/* + * CSR15: Synchronization status register. + * CFP: ASIC is in contention-free period. + * ATIMW: ASIC is in ATIM window. + * BEACON_SENT: Beacon is send. + */ +#define CSR15 0x003c +#define CSR15_CFP FIELD32(0x00000001) +#define CSR15_ATIMW FIELD32(0x00000002) +#define CSR15_BEACON_SENT FIELD32(0x00000004) + +/* + * CSR16: TSF timer register 0. + */ +#define CSR16 0x0040 +#define CSR16_LOW_TSFTIMER FIELD32(0xffffffff) + +/* + * CSR17: TSF timer register 1. + */ +#define CSR17 0x0044 +#define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff) + +/* + * CSR18: IFS timer register 0. + * SIFS: Sifs, default is 10 us. + * PIFS: Pifs, default is 30 us. + */ +#define CSR18 0x0048 +#define CSR18_SIFS FIELD32(0x0000ffff) +#define CSR18_PIFS FIELD32(0xffff0000) + +/* + * CSR19: IFS timer register 1. + * DIFS: Difs, default is 50 us. + * EIFS: Eifs, default is 364 us. + */ +#define CSR19 0x004c +#define CSR19_DIFS FIELD32(0x0000ffff) +#define CSR19_EIFS FIELD32(0xffff0000) + +/* + * CSR20: Wakeup timer register. + * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU. + * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. + * AUTOWAKE: Enable auto wakeup / sleep mechanism. + */ +#define CSR20 0x0050 +#define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff) +#define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000) +#define CSR20_AUTOWAKE FIELD32(0x01000000) + +/* + * CSR21: EEPROM control register. + * RELOAD: Write 1 to reload eeprom content. + * TYPE_93C46: 1: 93c46, 0:93c66. + */ +#define CSR21 0x0054 +#define CSR21_RELOAD FIELD32(0x00000001) +#define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002) +#define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004) +#define CSR21_EEPROM_DATA_IN FIELD32(0x00000008) +#define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010) +#define CSR21_TYPE_93C46 FIELD32(0x00000020) + +/* + * CSR22: CFP control register. + * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU. + * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain. + */ +#define CSR22 0x0058 +#define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff) +#define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000) + +/* + * Transmit related CSRs. + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * TXCSR0: TX Control Register. + * KICK_TX: Kick tx ring. + * KICK_ATIM: Kick atim ring. + * KICK_PRIO: Kick priority ring. + * ABORT: Abort all transmit related ring operation. + */ +#define TXCSR0 0x0060 +#define TXCSR0_KICK_TX FIELD32(0x00000001) +#define TXCSR0_KICK_ATIM FIELD32(0x00000002) +#define TXCSR0_KICK_PRIO FIELD32(0x00000004) +#define TXCSR0_ABORT FIELD32(0x00000008) + +/* + * TXCSR1: TX Configuration Register. + * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps. + * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps. + * TSF_OFFSET: Insert tsf offset. + * AUTORESPONDER: Enable auto responder which include ack & cts. + */ +#define TXCSR1 0x0064 +#define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff) +#define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00) +#define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000) +#define TXCSR1_AUTORESPONDER FIELD32(0x01000000) + +/* + * TXCSR2: Tx descriptor configuration register. + * TXD_SIZE: Tx descriptor size, default is 48. + * NUM_TXD: Number of tx entries in ring. + * NUM_ATIM: Number of atim entries in ring. + * NUM_PRIO: Number of priority entries in ring. + */ +#define TXCSR2 0x0068 +#define TXCSR2_TXD_SIZE FIELD32(0x000000ff) +#define TXCSR2_NUM_TXD FIELD32(0x0000ff00) +#define TXCSR2_NUM_ATIM FIELD32(0x00ff0000) +#define TXCSR2_NUM_PRIO FIELD32(0xff000000) + +/* + * TXCSR3: TX Ring Base address register. + */ +#define TXCSR3 0x006c +#define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff) + +/* + * TXCSR4: TX Atim Ring Base address register. + */ +#define TXCSR4 0x0070 +#define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff) + +/* + * TXCSR5: TX Prio Ring Base address register. + */ +#define TXCSR5 0x0074 +#define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff) + +/* + * TXCSR6: Beacon Base address register. + */ +#define TXCSR6 0x0078 +#define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff) + +/* + * TXCSR7: Auto responder control register. + * AR_POWERMANAGEMENT: Auto responder power management bit. + */ +#define TXCSR7 0x007c +#define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001) + +/* + * Receive related CSRs. + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * RXCSR0: RX Control Register. + * DISABLE_RX: Disable rx engine. + * DROP_CRC: Drop crc error. + * DROP_PHYSICAL: Drop physical error. + * DROP_CONTROL: Drop control frame. + * DROP_NOT_TO_ME: Drop not to me unicast frame. + * DROP_TODS: Drop frame tods bit is true. + * DROP_VERSION_ERROR: Drop version error frame. + * PASS_CRC: Pass all packets with crc attached. + */ +#define RXCSR0 0x0080 +#define RXCSR0_DISABLE_RX FIELD32(0x00000001) +#define RXCSR0_DROP_CRC FIELD32(0x00000002) +#define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004) +#define RXCSR0_DROP_CONTROL FIELD32(0x00000008) +#define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010) +#define RXCSR0_DROP_TODS FIELD32(0x00000020) +#define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040) +#define RXCSR0_PASS_CRC FIELD32(0x00000080) + +/* + * RXCSR1: RX descriptor configuration register. + * RXD_SIZE: Rx descriptor size, default is 32b. + * NUM_RXD: Number of rx entries in ring. + */ +#define RXCSR1 0x0084 +#define RXCSR1_RXD_SIZE FIELD32(0x000000ff) +#define RXCSR1_NUM_RXD FIELD32(0x0000ff00) + +/* + * RXCSR2: RX Ring base address register. + */ +#define RXCSR2 0x0088 +#define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff) + +/* + * RXCSR3: BBP ID register for Rx operation. + * BBP_ID#: BBP register # id. + * BBP_ID#_VALID: BBP register # id is valid or not. + */ +#define RXCSR3 0x0090 +#define RXCSR3_BBP_ID0 FIELD32(0x0000007f) +#define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080) +#define RXCSR3_BBP_ID1 FIELD32(0x00007f00) +#define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000) +#define RXCSR3_BBP_ID2 FIELD32(0x007f0000) +#define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000) +#define RXCSR3_BBP_ID3 FIELD32(0x7f000000) +#define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000) + +/* + * RXCSR4: BBP ID register for Rx operation. + * BBP_ID#: BBP register # id. + * BBP_ID#_VALID: BBP register # id is valid or not. + */ +#define RXCSR4 0x0094 +#define RXCSR4_BBP_ID4 FIELD32(0x0000007f) +#define RXCSR4_BBP_ID4_VALID FIELD32(0x00000080) +#define RXCSR4_BBP_ID5 FIELD32(0x00007f00) +#define RXCSR4_BBP_ID5_VALID FIELD32(0x00008000) + +/* + * ARCSR0: Auto Responder PLCP config register 0. + * ARCSR0_AR_BBP_DATA#: Auto responder BBP register # data. + * ARCSR0_AR_BBP_ID#: Auto responder BBP register # Id. + */ +#define ARCSR0 0x0098 +#define ARCSR0_AR_BBP_DATA0 FIELD32(0x000000ff) +#define ARCSR0_AR_BBP_ID0 FIELD32(0x0000ff00) +#define ARCSR0_AR_BBP_DATA1 FIELD32(0x00ff0000) +#define ARCSR0_AR_BBP_ID1 FIELD32(0xff000000) + +/* + * ARCSR1: Auto Responder PLCP config register 1. + * ARCSR0_AR_BBP_DATA#: Auto responder BBP register # data. + * ARCSR0_AR_BBP_ID#: Auto responder BBP register # Id. + */ +#define ARCSR1 0x009c +#define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff) +#define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00) +#define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000) +#define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000) + +/* + * Miscellaneous Registers. + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * PCICSR: PCI control register. + * BIG_ENDIAN: 1: big endian, 0: little endian. + * RX_TRESHOLD: Rx threshold in dw to start pci access + * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw. + * TX_TRESHOLD: Tx threshold in dw to start pci access + * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward. + * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw. + * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational. + */ +#define PCICSR 0x008c +#define PCICSR_BIG_ENDIAN FIELD32(0x00000001) +#define PCICSR_RX_TRESHOLD FIELD32(0x00000006) +#define PCICSR_TX_TRESHOLD FIELD32(0x00000018) +#define PCICSR_BURST_LENTH FIELD32(0x00000060) +#define PCICSR_ENABLE_CLK FIELD32(0x00000080) + +/* + * CNT0: FCS error count. + * FCS_ERROR: FCS error count, cleared when read. + */ +#define CNT0 0x00a0 +#define CNT0_FCS_ERROR FIELD32(0x0000ffff) + +/* + * Statistic Register. + * CNT1: PLCP error count. + * CNT2: Long error count. + * CNT3: CCA false alarm count. + * CNT4: Rx FIFO overflow count. + * CNT5: Tx FIFO underrun count. + */ +#define TIMECSR2 0x00a8 +#define CNT1 0x00ac +#define CNT2 0x00b0 +#define TIMECSR3 0x00b4 +#define CNT3 0x00b8 +#define CNT4 0x00bc +#define CNT5 0x00c0 + +/* + * Baseband Control Register. + */ + +/* + * PWRCSR0: Power mode configuration register. + */ +#define PWRCSR0 0x00c4 + +/* + * Power state transition time registers. + */ +#define PSCSR0 0x00c8 +#define PSCSR1 0x00cc +#define PSCSR2 0x00d0 +#define PSCSR3 0x00d4 + +/* + * PWRCSR1: Manual power control / status register. + * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake. + * SET_STATE: Set state. Write 1 to trigger, self cleared. + * BBP_DESIRE_STATE: BBP desired state. + * RF_DESIRE_STATE: RF desired state. + * BBP_CURR_STATE: BBP current state. + * RF_CURR_STATE: RF current state. + * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared. + */ +#define PWRCSR1 0x00d8 +#define PWRCSR1_SET_STATE FIELD32(0x00000001) +#define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006) +#define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018) +#define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060) +#define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180) +#define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200) + +/* + * TIMECSR: Timer control register. + * US_COUNT: 1 us timer count in units of clock cycles. + * US_64_COUNT: 64 us timer count in units of 1 us timer. + * BEACON_EXPECT: Beacon expect window. + */ +#define TIMECSR 0x00dc +#define TIMECSR_US_COUNT FIELD32(0x000000ff) +#define TIMECSR_US_64_COUNT FIELD32(0x0000ff00) +#define TIMECSR_BEACON_EXPECT FIELD32(0x00070000) + +/* + * MACCSR0: MAC configuration register 0. + */ +#define MACCSR0 0x00e0 + +/* + * MACCSR1: MAC configuration register 1. + * KICK_RX: Kick one-shot rx in one-shot rx mode. + * ONESHOT_RXMODE: Enable one-shot rx mode for debugging. + * BBPRX_RESET_MODE: Ralink bbp rx reset mode. + * AUTO_TXBBP: Auto tx logic access bbp control register. + * AUTO_RXBBP: Auto rx logic access bbp control register. + * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd. + * INTERSIL_IF: Intersil if calibration pin. + */ +#define MACCSR1 0x00e4 +#define MACCSR1_KICK_RX FIELD32(0x00000001) +#define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002) +#define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004) +#define MACCSR1_AUTO_TXBBP FIELD32(0x00000008) +#define MACCSR1_AUTO_RXBBP FIELD32(0x00000010) +#define MACCSR1_LOOPBACK FIELD32(0x00000060) +#define MACCSR1_INTERSIL_IF FIELD32(0x00000080) + +/* + * RALINKCSR: Ralink Rx auto-reset BBCR. + * AR_BBP_DATA#: Auto reset BBP register # data. + * AR_BBP_ID#: Auto reset BBP register # id. + */ +#define RALINKCSR 0x00e8 +#define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff) +#define RALINKCSR_AR_BBP_ID0 FIELD32(0x0000ff00) +#define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000) +#define RALINKCSR_AR_BBP_ID1 FIELD32(0xff000000) + +/* + * BCNCSR: Beacon interval control register. + * CHANGE: Write one to change beacon interval. + * DELTATIME: The delta time value. + * NUM_BEACON: Number of beacon according to mode. + * MODE: Please refer to asic specs. + * PLUS: Plus or minus delta time value. + */ +#define BCNCSR 0x00ec +#define BCNCSR_CHANGE FIELD32(0x00000001) +#define BCNCSR_DELTATIME FIELD32(0x0000001e) +#define BCNCSR_NUM_BEACON FIELD32(0x00001fe0) +#define BCNCSR_MODE FIELD32(0x00006000) +#define BCNCSR_PLUS FIELD32(0x00008000) + +/* + * BBP / RF / IF Control Register. + */ + +/* + * BBPCSR: BBP serial control register. + * VALUE: Register value to program into BBP. + * REGNUM: Selected BBP register. + * BUSY: 1: asic is busy execute BBP programming. + * WRITE_CONTROL: 1: write BBP, 0: read BBP. + */ +#define BBPCSR 0x00f0 +#define BBPCSR_VALUE FIELD32(0x000000ff) +#define BBPCSR_REGNUM FIELD32(0x00007f00) +#define BBPCSR_BUSY FIELD32(0x00008000) +#define BBPCSR_WRITE_CONTROL FIELD32(0x00010000) + +/* + * RFCSR: RF serial control register. + * VALUE: Register value + id to program into rf/if. + * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22). + * IF_SELECT: Chip to program: 0: rf, 1: if. + * PLL_LD: Rf pll_ld status. + * BUSY: 1: asic is busy execute rf programming. + */ +#define RFCSR 0x00f4 +#define RFCSR_VALUE FIELD32(0x00ffffff) +#define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000) +#define RFCSR_IF_SELECT FIELD32(0x20000000) +#define RFCSR_PLL_LD FIELD32(0x40000000) +#define RFCSR_BUSY FIELD32(0x80000000) + +/* + * LEDCSR: LED control register. + * ON_PERIOD: On period, default 70ms. + * OFF_PERIOD: Off period, default 30ms. + * LINK: 0: linkoff, 1: linkup. + * ACTIVITY: 0: idle, 1: active. + */ +#define LEDCSR 0x00f8 +#define LEDCSR_ON_PERIOD FIELD32(0x000000ff) +#define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00) +#define LEDCSR_LINK FIELD32(0x00010000) +#define LEDCSR_ACTIVITY FIELD32(0x00020000) + +/* + * ASIC pointer information. + * RXPTR: Current RX ring address. + * TXPTR: Current Tx ring address. + * PRIPTR: Current Priority ring address. + * ATIMPTR: Current ATIM ring address. + */ +#define RXPTR 0x0100 +#define TXPTR 0x0104 +#define PRIPTR 0x0108 +#define ATIMPTR 0x010c + +/* + * GPIO and others. + */ + +/* + * GPIOCSR: GPIO control register. + */ +#define GPIOCSR 0x0120 +#define GPIOCSR_BIT0 FIELD32(0x00000001) +#define GPIOCSR_BIT1 FIELD32(0x00000002) +#define GPIOCSR_BIT2 FIELD32(0x00000004) +#define GPIOCSR_BIT3 FIELD32(0x00000008) +#define GPIOCSR_BIT4 FIELD32(0x00000010) +#define GPIOCSR_BIT5 FIELD32(0x00000020) +#define GPIOCSR_BIT6 FIELD32(0x00000040) +#define GPIOCSR_BIT7 FIELD32(0x00000080) + +/* + * BBPPCSR: BBP Pin control register. + */ +#define BBPPCSR 0x0124 + +/* + * BCNCSR1: Tx BEACON offset time control register. + * PRELOAD: Beacon timer offset in units of usec. + */ +#define BCNCSR1 0x0130 +#define BCNCSR1_PRELOAD FIELD32(0x0000ffff) + +/* + * MACCSR2: TX_PE to RX_PE turn-around time control register + * DELAY: RX_PE low width, in units of pci clock cycle. + */ +#define MACCSR2 0x0134 +#define MACCSR2_DELAY FIELD32(0x000000ff) + +/* + * ARCSR2: 1 Mbps ACK/CTS PLCP. + */ +#define ARCSR2 0x013c +#define ARCSR2_SIGNAL FIELD32(0x000000ff) +#define ARCSR2_SERVICE FIELD32(0x0000ff00) +#define ARCSR2_LENGTH_LOW FIELD32(0x00ff0000) +#define ARCSR2_LENGTH FIELD32(0xffff0000) + +/* + * ARCSR3: 2 Mbps ACK/CTS PLCP. + */ +#define ARCSR3 0x0140 +#define ARCSR3_SIGNAL FIELD32(0x000000ff) +#define ARCSR3_SERVICE FIELD32(0x0000ff00) +#define ARCSR3_LENGTH FIELD32(0xffff0000) + +/* + * ARCSR4: 5.5 Mbps ACK/CTS PLCP. + */ +#define ARCSR4 0x0144 +#define ARCSR4_SIGNAL FIELD32(0x000000ff) +#define ARCSR4_SERVICE FIELD32(0x0000ff00) +#define ARCSR4_LENGTH FIELD32(0xffff0000) + +/* + * ARCSR5: 11 Mbps ACK/CTS PLCP. + */ +#define ARCSR5 0x0148 +#define ARCSR5_SIGNAL FIELD32(0x000000ff) +#define ARCSR5_SERVICE FIELD32(0x0000ff00) +#define ARCSR5_LENGTH FIELD32(0xffff0000) + +/* + * BBP registers. + * The wordsize of the BBP is 8 bits. + */ + +/* + * R1: TX antenna control + */ +#define BBP_R1_TX_ANTENNA FIELD8(0x03) + +/* + * R4: RX antenna control + */ +#define BBP_R4_RX_ANTENNA FIELD8(0x06) + +/* + * RF registers + */ + +/* + * RF 1 + */ +#define RF1_TUNER FIELD32(0x00020000) + +/* + * RF 3 + */ +#define RF3_TUNER FIELD32(0x00000100) +#define RF3_TXPOWER FIELD32(0x00003e00) + +/* + * EEPROM content. + * The wordsize of the EEPROM is 16 bits. + */ + +/* + * HW MAC address. + */ +#define EEPROM_MAC_ADDR_0 0x0002 +#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) +#define EEPROM_MAC_ADDR1 0x0003 +#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) +#define EEPROM_MAC_ADDR_2 0x0004 +#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) + +/* + * EEPROM antenna. + * ANTENNA_NUM: Number of antenna's. + * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. + * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. + * RF_TYPE: Rf_type of this adapter. + * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd. + * RX_AGCVGC: 0: disable, 1:enable BBP R13 tuning. + * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. + */ +#define EEPROM_ANTENNA 0x0b +#define EEPROM_ANTENNA_NUM FIELD16(0x0003) +#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) +#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) +#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0040) +#define EEPROM_ANTENNA_LED_MODE FIELD16(0x0180) +#define EEPROM_ANTENNA_RX_AGCVGC_TUNING FIELD16(0x0200) +#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) + +/* + * EEPROM BBP. + */ +#define EEPROM_BBP_START 0x0c +#define EEPROM_BBP_SIZE 7 +#define EEPROM_BBP_VALUE FIELD16(0x00ff) +#define EEPROM_BBP_REG_ID FIELD16(0xff00) + +/* + * EEPROM TXPOWER + */ +#define EEPROM_TXPOWER_START 0x13 +#define EEPROM_TXPOWER_SIZE 7 +#define EEPROM_TXPOWER_1 FIELD16(0x00ff) +#define EEPROM_TXPOWER_2 FIELD16(0xff00) + +/* + * DMA descriptor defines. + */ +#define TXD_DESC_SIZE ( 8 * sizeof(struct data_desc) ) +#define RXD_DESC_SIZE ( 8 * sizeof(struct data_desc) ) + +/* + * TX descriptor format for TX, PRIO, ATIM and Beacon Ring. + */ + +/* + * Word0 + */ +#define TXD_W0_OWNER_NIC FIELD32(0x00000001) +#define TXD_W0_VALID FIELD32(0x00000002) +#define TXD_W0_RESULT FIELD32(0x0000001c) +#define TXD_W0_RETRY_COUNT FIELD32(0x000000e0) +#define TXD_W0_MORE_FRAG FIELD32(0x00000100) +#define TXD_W0_ACK FIELD32(0x00000200) +#define TXD_W0_TIMESTAMP FIELD32(0x00000400) +#define TXD_W0_RTS FIELD32(0x00000800) +#define TXD_W0_IFS FIELD32(0x00006000) +#define TXD_W0_RETRY_MODE FIELD32(0x00008000) +#define TXD_W0_AGC FIELD32(0x00ff0000) +#define TXD_W0_R2 FIELD32(0xff000000) + +/* + * Word1 + */ +#define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) + +/* + * Word2 + */ +#define TXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff) +#define TXD_W2_DATABYTE_COUNT FIELD32(0xffff0000) + +/* + * Word3 & 4: PLCP information + */ +#define TXD_W3_PLCP_SIGNAL FIELD32(0x0000ffff) +#define TXD_W3_PLCP_SERVICE FIELD32(0xffff0000) +#define TXD_W4_PLCP_LENGTH_LOW FIELD32(0x0000ffff) +#define TXD_W4_PLCP_LENGTH_HIGH FIELD32(0xffff0000) + +/* + * Word5 + */ +#define TXD_W5_BBCR4 FIELD32(0x0000ffff) +#define TXD_W5_AGC_REG FIELD32(0x007f0000) +#define TXD_W5_AGC_REG_VALID FIELD32(0x00800000) +#define TXD_W5_XXX_REG FIELD32(0x7f000000) +#define TXD_W5_XXX_REG_VALID FIELD32(0x80000000) + +/* + * Word6 + */ +#define TXD_W6_SK_BUFF FIELD32(0xffffffff) + +/* + * Word7 + */ +#define TXD_W7_RESERVED FIELD32(0xffffffff) + +/* + * RX descriptor format for RX Ring. + */ + +/* + * Word0 + */ +#define RXD_W0_OWNER_NIC FIELD32(0x00000001) +#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002) +#define RXD_W0_MULTICAST FIELD32(0x00000004) +#define RXD_W0_BROADCAST FIELD32(0x00000008) +#define RXD_W0_MY_BSS FIELD32(0x00000010) +#define RXD_W0_CRC_ERROR FIELD32(0x00000020) +#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080) +#define RXD_W0_DATABYTE_COUNT FIELD32(0xffff0000) + +/* + * Word1 + */ +#define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) + +/* + * Word2 + */ +#define RXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff) +#define RXD_W2_SIGNAL FIELD32(0x00ff0000) +#define RXD_W2_RSSI FIELD32(0xff000000) + +/* + * Word3 + */ +#define RXD_W3_BBR2 FIELD32(0x000000ff) +#define RXD_W3_BBR3 FIELD32(0x0000ff00) +#define RXD_W3_BBR4 FIELD32(0x00ff0000) +#define RXD_W3_BBR5 FIELD32(0xff000000) + +/* + * Word4 + */ +#define RXD_W4_RX_END_TIME FIELD32(0xffffffff) + +/* + * Word5 & 6 & 7: Reserved + */ +#define RXD_W5_RESERVED FIELD32(0xffffffff) +#define RXD_W6_RESERVED FIELD32(0xffffffff) +#define RXD_W7_RESERVED FIELD32(0xffffffff) + +/* + * Macro's for converting txpower from EEPROM to dscape value + * and from dscape value to register value. + * NOTE: Logics in rt2400pci for txpower are reversed + * compared to the other rt2x00 drivers. A higher txpower + * value means that the txpower must be lowered. This is + * important when converting the value coming from the + * dscape stack to the rt2400 acceptable value. + */ +#define MIN_TXPOWER 31 +#define MAX_TXPOWER 62 +#define DEFAULT_TXPOWER 39 + +#define TXPOWER_FROM_DEV(__txpower) \ +({ \ + ((__txpower) > MAX_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \ + ((__txpower) < MIN_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \ + (((__txpower) - MAX_TXPOWER) + MIN_TXPOWER); \ +}) + +#define TXPOWER_TO_DEV(__txpower) \ +({ \ + (__txpower) += MIN_TXPOWER; \ + ((__txpower) <= MIN_TXPOWER) ? MAX_TXPOWER : \ + (((__txpower) >= MAX_TXPOWER) ? MIN_TXPOWER : \ + (MAX_TXPOWER - ((__txpower) - MIN_TXPOWER))); \ +}) + +#endif /* RT2400PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c new file mode 100644 index 000000000000..f6115c626fa7 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -0,0 +1,2000 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2500pci + Abstract: rt2500pci device specific routines. + Supported chipsets: RT2560. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt2500pci" + +#include +#include +#include +#include +#include +#include +#include + +#include "rt2x00.h" +#include "rt2x00pci.h" +#include "rt2500pci.h" + +/* + * Register access. + * All access to the CSR registers will go through the methods + * rt2x00pci_register_read and rt2x00pci_register_write. + * BBP and RF register require indirect register access, + * and use the CSR registers BBPCSR and RFCSR to achieve this. + * These indirect registers work with busy bits, + * and we will try maximal REGISTER_BUSY_COUNT times to access + * the register while taking a REGISTER_BUSY_DELAY us delay + * between each attampt. When the busy bit is still set at that time, + * the access attempt is considered to have failed, + * and we will print an error. + */ +static u32 rt2500pci_bbp_check(const struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + unsigned int i; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00pci_register_read(rt2x00dev, BBPCSR, ®); + if (!rt2x00_get_field32(reg, BBPCSR_BUSY)) + break; + udelay(REGISTER_BUSY_DELAY); + } + + return reg; +} + +static void rt2500pci_bbp_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u32 reg; + + /* + * Wait until the BBP becomes ready. + */ + reg = rt2500pci_bbp_check(rt2x00dev); + if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { + ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n"); + return; + } + + /* + * Write the data into the BBP. + */ + reg = 0; + rt2x00_set_field32(®, BBPCSR_VALUE, value); + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); + + rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); +} + +static void rt2500pci_bbp_read(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u8 *value) +{ + u32 reg; + + /* + * Wait until the BBP becomes ready. + */ + reg = rt2500pci_bbp_check(rt2x00dev); + if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { + ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); + return; + } + + /* + * Write the request into the BBP. + */ + reg = 0; + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); + + rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); + + /* + * Wait until the BBP becomes ready. + */ + reg = rt2500pci_bbp_check(rt2x00dev); + if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { + ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); + *value = 0xff; + return; + } + + *value = rt2x00_get_field32(reg, BBPCSR_VALUE); +} + +static void rt2500pci_rf_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) +{ + u32 reg; + unsigned int i; + + if (!word) + return; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00pci_register_read(rt2x00dev, RFCSR, ®); + if (!rt2x00_get_field32(reg, RFCSR_BUSY)) + goto rf_write; + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n"); + return; + +rf_write: + reg = 0; + rt2x00_set_field32(®, RFCSR_VALUE, value); + rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); + rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); + rt2x00_set_field32(®, RFCSR_BUSY, 1); + + rt2x00pci_register_write(rt2x00dev, RFCSR, reg); + rt2x00_rf_write(rt2x00dev, word, value); +} + +static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom) +{ + struct rt2x00_dev *rt2x00dev = eeprom->data; + u32 reg; + + rt2x00pci_register_read(rt2x00dev, CSR21, ®); + + eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN); + eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT); + eeprom->reg_data_clock = + !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK); + eeprom->reg_chip_select = + !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT); +} + +static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom) +{ + struct rt2x00_dev *rt2x00dev = eeprom->data; + u32 reg = 0; + + rt2x00_set_field32(®, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in); + rt2x00_set_field32(®, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out); + rt2x00_set_field32(®, CSR21_EEPROM_DATA_CLOCK, + !!eeprom->reg_data_clock); + rt2x00_set_field32(®, CSR21_EEPROM_CHIP_SELECT, + !!eeprom->reg_chip_select); + + rt2x00pci_register_write(rt2x00dev, CSR21, reg); +} + +#ifdef CONFIG_RT2X00_LIB_DEBUGFS +#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) + +static void rt2500pci_read_csr(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u32 *data) +{ + rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data); +} + +static void rt2500pci_write_csr(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u32 data) +{ + rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data); +} + +static const struct rt2x00debug rt2500pci_rt2x00debug = { + .owner = THIS_MODULE, + .csr = { + .read = rt2500pci_read_csr, + .write = rt2500pci_write_csr, + .word_size = sizeof(u32), + .word_count = CSR_REG_SIZE / sizeof(u32), + }, + .eeprom = { + .read = rt2x00_eeprom_read, + .write = rt2x00_eeprom_write, + .word_size = sizeof(u16), + .word_count = EEPROM_SIZE / sizeof(u16), + }, + .bbp = { + .read = rt2500pci_bbp_read, + .write = rt2500pci_bbp_write, + .word_size = sizeof(u8), + .word_count = BBP_SIZE / sizeof(u8), + }, + .rf = { + .read = rt2x00_rf_read, + .write = rt2500pci_rf_write, + .word_size = sizeof(u32), + .word_count = RF_SIZE / sizeof(u32), + }, +}; +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + +#ifdef CONFIG_RT2500PCI_RFKILL +static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®); + return rt2x00_get_field32(reg, GPIOCSR_BIT0); +} +#endif /* CONFIG_RT2400PCI_RFKILL */ + +/* + * Configuration handlers. + */ +static void rt2500pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr) +{ + __le32 reg[2]; + + memset(®, 0, sizeof(reg)); + memcpy(®, addr, ETH_ALEN); + + /* + * The MAC address is passed to us as an array of bytes, + * that array is little endian, so no need for byte ordering. + */ + rt2x00pci_register_multiwrite(rt2x00dev, CSR3, ®, sizeof(reg)); +} + +static void rt2500pci_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid) +{ + __le32 reg[2]; + + memset(®, 0, sizeof(reg)); + memcpy(®, bssid, ETH_ALEN); + + /* + * The BSSID is passed to us as an array of bytes, + * that array is little endian, so no need for byte ordering. + */ + rt2x00pci_register_multiwrite(rt2x00dev, CSR5, ®, sizeof(reg)); +} + +static void rt2500pci_config_packet_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter) +{ + int promisc = !!(filter & IFF_PROMISC); + int multicast = !!(filter & IFF_MULTICAST); + int broadcast = !!(filter & IFF_BROADCAST); + u32 reg; + + rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); + rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, !promisc); + rt2x00_set_field32(®, RXCSR0_DROP_MCAST, !multicast); + rt2x00_set_field32(®, RXCSR0_DROP_BCAST, !broadcast); + rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); +} + +static void rt2500pci_config_type(struct rt2x00_dev *rt2x00dev, const int type) +{ + u32 reg; + + rt2x00pci_register_write(rt2x00dev, CSR14, 0); + + /* + * Apply hardware packet filter. + */ + rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); + + if (!is_monitor_present(&rt2x00dev->interface) && + (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA)) + rt2x00_set_field32(®, RXCSR0_DROP_TODS, 1); + else + rt2x00_set_field32(®, RXCSR0_DROP_TODS, 0); + + /* + * If there is a non-monitor interface present + * the packet should be strict (even if a monitor interface is present!). + * When there is only 1 interface present which is in monitor mode + * we should start accepting _all_ frames. + */ + if (is_interface_present(&rt2x00dev->interface)) { + rt2x00_set_field32(®, RXCSR0_DROP_CRC, 1); + rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, 1); + rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, 1); + rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); + } else if (is_monitor_present(&rt2x00dev->interface)) { + rt2x00_set_field32(®, RXCSR0_DROP_CRC, 0); + rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, 0); + rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, 0); + rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 0); + } + + rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); + + /* + * Enable beacon config + */ + rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®); + rt2x00_set_field32(®, BCNCSR1_PRELOAD, + PREAMBLE + get_duration(IEEE80211_HEADER, 2)); + rt2x00_set_field32(®, BCNCSR1_BEACON_CWMIN, + rt2x00lib_get_ring(rt2x00dev, + IEEE80211_TX_QUEUE_BEACON) + ->tx_params.cw_min); + rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg); + + /* + * Enable synchronisation. + */ + rt2x00pci_register_read(rt2x00dev, CSR14, ®); + if (is_interface_present(&rt2x00dev->interface)) { + rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); + rt2x00_set_field32(®, CSR14_TBCN, 1); + } + + rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); + if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP) + rt2x00_set_field32(®, CSR14_TSF_SYNC, 2); + else if (type == IEEE80211_IF_TYPE_STA) + rt2x00_set_field32(®, CSR14_TSF_SYNC, 1); + else if (is_monitor_present(&rt2x00dev->interface) && + !is_interface_present(&rt2x00dev->interface)) + rt2x00_set_field32(®, CSR14_TSF_SYNC, 0); + + rt2x00pci_register_write(rt2x00dev, CSR14, reg); +} + +static void rt2500pci_config_rate(struct rt2x00_dev *rt2x00dev, const int rate) +{ + struct ieee80211_conf *conf = &rt2x00dev->hw->conf; + u32 reg; + u32 preamble; + u16 value; + + if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE)) + preamble = SHORT_PREAMBLE; + else + preamble = PREAMBLE; + + reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK; + rt2x00pci_register_write(rt2x00dev, ARCSR1, reg); + + rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); + value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ? + SHORT_DIFS : DIFS) + + PLCP + preamble + get_duration(ACK_SIZE, 10); + rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, value); + value = SIFS + PLCP + preamble + get_duration(ACK_SIZE, 10); + rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, value); + rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); + + preamble = DEVICE_GET_RATE_FIELD(rate, PREAMBLE) ? 0x08 : 0x00; + + rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); + rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00 | preamble); + rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10)); + rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR3, ®); + rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble); + rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20)); + rt2x00pci_register_write(rt2x00dev, ARCSR3, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR4, ®); + rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble); + rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); + rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55)); + rt2x00pci_register_write(rt2x00dev, ARCSR4, reg); + + rt2x00pci_register_read(rt2x00dev, ARCSR5, ®); + rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble); + rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); + rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110)); + rt2x00pci_register_write(rt2x00dev, ARCSR5, reg); +} + +static void rt2500pci_config_phymode(struct rt2x00_dev *rt2x00dev, + const int phymode) +{ + struct ieee80211_hw_mode *mode; + struct ieee80211_rate *rate; + + if (phymode == MODE_IEEE80211A) + rt2x00dev->curr_hwmode = HWMODE_A; + else if (phymode == MODE_IEEE80211B) + rt2x00dev->curr_hwmode = HWMODE_B; + else + rt2x00dev->curr_hwmode = HWMODE_G; + + mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode]; + rate = &mode->rates[mode->num_rates - 1]; + + rt2500pci_config_rate(rt2x00dev, rate->val2); +} + +static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev, + const int index, const int channel, + const int txpower) +{ + struct rf_channel reg; + u8 r70; + + /* + * Fill rf_reg structure. + */ + memcpy(®, &rt2x00dev->spec.channels[index], sizeof(reg)); + + /* + * Set TXpower. + */ + rt2x00_set_field32(®.rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); + + /* + * Switch on tuning bits. + * For RT2523 devices we do not need to update the R1 register. + */ + if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) + rt2x00_set_field32(®.rf1, RF1_TUNER, 1); + rt2x00_set_field32(®.rf3, RF3_TUNER, 1); + + /* + * For RT2525 we should first set the channel to half band higher. + */ + if (rt2x00_rf(&rt2x00dev->chip, RF2525)) { + static const u32 vals[] = { + 0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a, + 0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a, + 0x00080d1e, 0x00080d22, 0x00080d26, 0x00080d2a, + 0x00080d2e, 0x00080d3a + }; + + rt2500pci_rf_write(rt2x00dev, 1, reg.rf1); + rt2500pci_rf_write(rt2x00dev, 2, vals[channel - 1]); + rt2500pci_rf_write(rt2x00dev, 3, reg.rf3); + if (reg.rf4) + rt2500pci_rf_write(rt2x00dev, 4, reg.rf4); + } + + rt2500pci_rf_write(rt2x00dev, 1, reg.rf1); + rt2500pci_rf_write(rt2x00dev, 2, reg.rf2); + rt2500pci_rf_write(rt2x00dev, 3, reg.rf3); + if (reg.rf4) + rt2500pci_rf_write(rt2x00dev, 4, reg.rf4); + + /* + * Channel 14 requires the Japan filter bit to be set. + */ + r70 = 0x46; + rt2x00_set_field8(&r70, BBP_R70_JAPAN_FILTER, channel == 14); + rt2500pci_bbp_write(rt2x00dev, 70, r70); + + msleep(1); + + /* + * Switch off tuning bits. + * For RT2523 devices we do not need to update the R1 register. + */ + if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) { + rt2x00_set_field32(®.rf1, RF1_TUNER, 0); + rt2500pci_rf_write(rt2x00dev, 1, reg.rf1); + } + + rt2x00_set_field32(®.rf3, RF3_TUNER, 0); + rt2500pci_rf_write(rt2x00dev, 3, reg.rf3); + + /* + * Clear false CRC during channel switch. + */ + rt2x00pci_register_read(rt2x00dev, CNT0, ®.rf1); +} + +static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev, + const int txpower) +{ + u32 rf3; + + rt2x00_rf_read(rt2x00dev, 3, &rf3); + rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); + rt2500pci_rf_write(rt2x00dev, 3, rf3); +} + +static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, + const int antenna_tx, const int antenna_rx) +{ + u32 reg; + u8 r14; + u8 r2; + + rt2x00pci_register_read(rt2x00dev, BBPCSR1, ®); + rt2500pci_bbp_read(rt2x00dev, 14, &r14); + rt2500pci_bbp_read(rt2x00dev, 2, &r2); + + /* + * Configure the TX antenna. + */ + switch (antenna_tx) { + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); + rt2x00_set_field32(®, BBPCSR1_CCK, 2); + rt2x00_set_field32(®, BBPCSR1_OFDM, 2); + break; + case ANTENNA_A: + rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0); + rt2x00_set_field32(®, BBPCSR1_CCK, 0); + rt2x00_set_field32(®, BBPCSR1_OFDM, 0); + break; + case ANTENNA_B: + rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); + rt2x00_set_field32(®, BBPCSR1_CCK, 2); + rt2x00_set_field32(®, BBPCSR1_OFDM, 2); + break; + } + + /* + * Configure the RX antenna. + */ + switch (antenna_rx) { + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); + break; + case ANTENNA_A: + rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0); + break; + case ANTENNA_B: + rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); + break; + } + + /* + * RT2525E and RT5222 need to flip TX I/Q + */ + if (rt2x00_rf(&rt2x00dev->chip, RF2525E) || + rt2x00_rf(&rt2x00dev->chip, RF5222)) { + rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1); + rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 1); + rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 1); + + /* + * RT2525E does not need RX I/Q Flip. + */ + if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) + rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0); + } else { + rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 0); + rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 0); + } + + rt2x00pci_register_write(rt2x00dev, BBPCSR1, reg); + rt2500pci_bbp_write(rt2x00dev, 14, r14); + rt2500pci_bbp_write(rt2x00dev, 2, r2); +} + +static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev, + const int short_slot_time, + const int beacon_int) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_SLOT_TIME, + short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME); + rt2x00pci_register_write(rt2x00dev, CSR11, reg); + + rt2x00pci_register_read(rt2x00dev, CSR18, ®); + rt2x00_set_field32(®, CSR18_SIFS, SIFS); + rt2x00_set_field32(®, CSR18_PIFS, + short_slot_time ? SHORT_PIFS : PIFS); + rt2x00pci_register_write(rt2x00dev, CSR18, reg); + + rt2x00pci_register_read(rt2x00dev, CSR19, ®); + rt2x00_set_field32(®, CSR19_DIFS, + short_slot_time ? SHORT_DIFS : DIFS); + rt2x00_set_field32(®, CSR19_EIFS, EIFS); + rt2x00pci_register_write(rt2x00dev, CSR19, reg); + + rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); + rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); + rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); + + rt2x00pci_register_read(rt2x00dev, CSR12, ®); + rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, beacon_int * 16); + rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, beacon_int * 16); + rt2x00pci_register_write(rt2x00dev, CSR12, reg); +} + +static void rt2500pci_config(struct rt2x00_dev *rt2x00dev, + const unsigned int flags, + struct ieee80211_conf *conf) +{ + int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME; + + if (flags & CONFIG_UPDATE_PHYMODE) + rt2500pci_config_phymode(rt2x00dev, conf->phymode); + if (flags & CONFIG_UPDATE_CHANNEL) + rt2500pci_config_channel(rt2x00dev, conf->channel_val, + conf->channel, conf->power_level); + if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) + rt2500pci_config_txpower(rt2x00dev, conf->power_level); + if (flags & CONFIG_UPDATE_ANTENNA) + rt2500pci_config_antenna(rt2x00dev, conf->antenna_sel_tx, + conf->antenna_sel_rx); + if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) + rt2500pci_config_duration(rt2x00dev, short_slot_time, + conf->beacon_int); +} + +/* + * LED functions. + */ +static void rt2500pci_enable_led(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); + + rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70); + rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30); + + if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) { + rt2x00_set_field32(®, LEDCSR_LINK, 1); + rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0); + } else if (rt2x00dev->led_mode == LED_MODE_ASUS) { + rt2x00_set_field32(®, LEDCSR_LINK, 0); + rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1); + } else { + rt2x00_set_field32(®, LEDCSR_LINK, 1); + rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1); + } + + rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); +} + +static void rt2500pci_disable_led(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); + rt2x00_set_field32(®, LEDCSR_LINK, 0); + rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0); + rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); +} + +/* + * Link tuning + */ +static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + /* + * Update FCS error count from register. + */ + rt2x00pci_register_read(rt2x00dev, CNT0, ®); + rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR); + + /* + * Update False CCA count from register. + */ + rt2x00pci_register_read(rt2x00dev, CNT3, ®); + rt2x00dev->link.false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA); +} + +static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev) +{ + rt2500pci_bbp_write(rt2x00dev, 17, 0x48); + rt2x00dev->link.vgc_level = 0x48; +} + +static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); + u8 r17; + + /* + * To prevent collisions with MAC ASIC on chipsets + * up to version C the link tuning should halt after 20 + * seconds. + */ + if (rt2x00_get_rev(&rt2x00dev->chip) < RT2560_VERSION_D && + rt2x00dev->link.count > 20) + return; + + rt2500pci_bbp_read(rt2x00dev, 17, &r17); + + /* + * Chipset versions C and lower should directly continue + * to the dynamic CCA tuning. + */ + if (rt2x00_get_rev(&rt2x00dev->chip) < RT2560_VERSION_D) + goto dynamic_cca_tune; + + /* + * A too low RSSI will cause too much false CCA which will + * then corrupt the R17 tuning. To remidy this the tuning should + * be stopped (While making sure the R17 value will not exceed limits) + */ + if (rssi < -80 && rt2x00dev->link.count > 20) { + if (r17 >= 0x41) { + r17 = rt2x00dev->link.vgc_level; + rt2500pci_bbp_write(rt2x00dev, 17, r17); + } + return; + } + + /* + * Special big-R17 for short distance + */ + if (rssi >= -58) { + if (r17 != 0x50) + rt2500pci_bbp_write(rt2x00dev, 17, 0x50); + return; + } + + /* + * Special mid-R17 for middle distance + */ + if (rssi >= -74) { + if (r17 != 0x41) + rt2500pci_bbp_write(rt2x00dev, 17, 0x41); + return; + } + + /* + * Leave short or middle distance condition, restore r17 + * to the dynamic tuning range. + */ + if (r17 >= 0x41) { + rt2500pci_bbp_write(rt2x00dev, 17, rt2x00dev->link.vgc_level); + return; + } + +dynamic_cca_tune: + + /* + * R17 is inside the dynamic tuning range, + * start tuning the link based on the false cca counter. + */ + if (rt2x00dev->link.false_cca > 512 && r17 < 0x40) { + rt2500pci_bbp_write(rt2x00dev, 17, ++r17); + rt2x00dev->link.vgc_level = r17; + } else if (rt2x00dev->link.false_cca < 100 && r17 > 0x32) { + rt2500pci_bbp_write(rt2x00dev, 17, --r17); + rt2x00dev->link.vgc_level = r17; + } +} + +/* + * Initialization functions. + */ +static void rt2500pci_init_rxring(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring = rt2x00dev->rx; + struct data_desc *rxd; + unsigned int i; + u32 word; + + memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); + + for (i = 0; i < ring->stats.limit; i++) { + rxd = ring->entry[i].priv; + + rt2x00_desc_read(rxd, 1, &word); + rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, + ring->entry[i].data_dma); + rt2x00_desc_write(rxd, 1, word); + + rt2x00_desc_read(rxd, 0, &word); + rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); + rt2x00_desc_write(rxd, 0, word); + } + + rt2x00_ring_index_clear(rt2x00dev->rx); +} + +static void rt2500pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue) +{ + struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); + struct data_desc *txd; + unsigned int i; + u32 word; + + memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); + + for (i = 0; i < ring->stats.limit; i++) { + txd = ring->entry[i].priv; + + rt2x00_desc_read(txd, 1, &word); + rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, + ring->entry[i].data_dma); + rt2x00_desc_write(txd, 1, word); + + rt2x00_desc_read(txd, 0, &word); + rt2x00_set_field32(&word, TXD_W0_VALID, 0); + rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); + rt2x00_desc_write(txd, 0, word); + } + + rt2x00_ring_index_clear(ring); +} + +static int rt2500pci_init_rings(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + /* + * Initialize rings. + */ + rt2500pci_init_rxring(rt2x00dev); + rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); + rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); + rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON); + rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + + /* + * Initialize registers. + */ + rt2x00pci_register_read(rt2x00dev, TXCSR2, ®); + rt2x00_set_field32(®, TXCSR2_TXD_SIZE, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size); + rt2x00_set_field32(®, TXCSR2_NUM_TXD, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit); + rt2x00_set_field32(®, TXCSR2_NUM_ATIM, + rt2x00dev->bcn[1].stats.limit); + rt2x00_set_field32(®, TXCSR2_NUM_PRIO, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit); + rt2x00pci_register_write(rt2x00dev, TXCSR2, reg); + + rt2x00pci_register_read(rt2x00dev, TXCSR3, ®); + rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma); + rt2x00pci_register_write(rt2x00dev, TXCSR3, reg); + + rt2x00pci_register_read(rt2x00dev, TXCSR5, ®); + rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma); + rt2x00pci_register_write(rt2x00dev, TXCSR5, reg); + + rt2x00pci_register_read(rt2x00dev, TXCSR4, ®); + rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, + rt2x00dev->bcn[1].data_dma); + rt2x00pci_register_write(rt2x00dev, TXCSR4, reg); + + rt2x00pci_register_read(rt2x00dev, TXCSR6, ®); + rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, + rt2x00dev->bcn[0].data_dma); + rt2x00pci_register_write(rt2x00dev, TXCSR6, reg); + + rt2x00pci_register_read(rt2x00dev, RXCSR1, ®); + rt2x00_set_field32(®, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size); + rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->stats.limit); + rt2x00pci_register_write(rt2x00dev, RXCSR1, reg); + + rt2x00pci_register_read(rt2x00dev, RXCSR2, ®); + rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, + rt2x00dev->rx->data_dma); + rt2x00pci_register_write(rt2x00dev, RXCSR2, reg); + + return 0; +} + +static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002); + rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002); + rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00020002); + rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002); + + rt2x00pci_register_read(rt2x00dev, TIMECSR, ®); + rt2x00_set_field32(®, TIMECSR_US_COUNT, 33); + rt2x00_set_field32(®, TIMECSR_US_64_COUNT, 63); + rt2x00_set_field32(®, TIMECSR_BEACON_EXPECT, 0); + rt2x00pci_register_write(rt2x00dev, TIMECSR, reg); + + rt2x00pci_register_read(rt2x00dev, CSR9, ®); + rt2x00_set_field32(®, CSR9_MAX_FRAME_UNIT, + rt2x00dev->rx->data_size / 128); + rt2x00pci_register_write(rt2x00dev, CSR9, reg); + + /* + * Always use CWmin and CWmax set in descriptor. + */ + rt2x00pci_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_CW_SELECT, 0); + rt2x00pci_register_write(rt2x00dev, CSR11, reg); + + rt2x00pci_register_write(rt2x00dev, CNT3, 0); + + rt2x00pci_register_read(rt2x00dev, TXCSR8, ®); + rt2x00_set_field32(®, TXCSR8_BBP_ID0, 10); + rt2x00_set_field32(®, TXCSR8_BBP_ID0_VALID, 1); + rt2x00_set_field32(®, TXCSR8_BBP_ID1, 11); + rt2x00_set_field32(®, TXCSR8_BBP_ID1_VALID, 1); + rt2x00_set_field32(®, TXCSR8_BBP_ID2, 13); + rt2x00_set_field32(®, TXCSR8_BBP_ID2_VALID, 1); + rt2x00_set_field32(®, TXCSR8_BBP_ID3, 12); + rt2x00_set_field32(®, TXCSR8_BBP_ID3_VALID, 1); + rt2x00pci_register_write(rt2x00dev, TXCSR8, reg); + + rt2x00pci_register_read(rt2x00dev, ARTCSR0, ®); + rt2x00_set_field32(®, ARTCSR0_ACK_CTS_1MBS, 112); + rt2x00_set_field32(®, ARTCSR0_ACK_CTS_2MBS, 56); + rt2x00_set_field32(®, ARTCSR0_ACK_CTS_5_5MBS, 20); + rt2x00_set_field32(®, ARTCSR0_ACK_CTS_11MBS, 10); + rt2x00pci_register_write(rt2x00dev, ARTCSR0, reg); + + rt2x00pci_register_read(rt2x00dev, ARTCSR1, ®); + rt2x00_set_field32(®, ARTCSR1_ACK_CTS_6MBS, 45); + rt2x00_set_field32(®, ARTCSR1_ACK_CTS_9MBS, 37); + rt2x00_set_field32(®, ARTCSR1_ACK_CTS_12MBS, 33); + rt2x00_set_field32(®, ARTCSR1_ACK_CTS_18MBS, 29); + rt2x00pci_register_write(rt2x00dev, ARTCSR1, reg); + + rt2x00pci_register_read(rt2x00dev, ARTCSR2, ®); + rt2x00_set_field32(®, ARTCSR2_ACK_CTS_24MBS, 29); + rt2x00_set_field32(®, ARTCSR2_ACK_CTS_36MBS, 25); + rt2x00_set_field32(®, ARTCSR2_ACK_CTS_48MBS, 25); + rt2x00_set_field32(®, ARTCSR2_ACK_CTS_54MBS, 25); + rt2x00pci_register_write(rt2x00dev, ARTCSR2, reg); + + rt2x00pci_register_read(rt2x00dev, RXCSR3, ®); + rt2x00_set_field32(®, RXCSR3_BBP_ID0, 47); /* CCK Signal */ + rt2x00_set_field32(®, RXCSR3_BBP_ID0_VALID, 1); + rt2x00_set_field32(®, RXCSR3_BBP_ID1, 51); /* Rssi */ + rt2x00_set_field32(®, RXCSR3_BBP_ID1_VALID, 1); + rt2x00_set_field32(®, RXCSR3_BBP_ID2, 42); /* OFDM Rate */ + rt2x00_set_field32(®, RXCSR3_BBP_ID2_VALID, 1); + rt2x00_set_field32(®, RXCSR3_BBP_ID3, 51); /* RSSI */ + rt2x00_set_field32(®, RXCSR3_BBP_ID3_VALID, 1); + rt2x00pci_register_write(rt2x00dev, RXCSR3, reg); + + rt2x00pci_register_read(rt2x00dev, PCICSR, ®); + rt2x00_set_field32(®, PCICSR_BIG_ENDIAN, 0); + rt2x00_set_field32(®, PCICSR_RX_TRESHOLD, 0); + rt2x00_set_field32(®, PCICSR_TX_TRESHOLD, 3); + rt2x00_set_field32(®, PCICSR_BURST_LENTH, 1); + rt2x00_set_field32(®, PCICSR_ENABLE_CLK, 1); + rt2x00_set_field32(®, PCICSR_READ_MULTIPLE, 1); + rt2x00_set_field32(®, PCICSR_WRITE_INVALID, 1); + rt2x00pci_register_write(rt2x00dev, PCICSR, reg); + + rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100); + + rt2x00pci_register_write(rt2x00dev, GPIOCSR, 0x0000ff00); + rt2x00pci_register_write(rt2x00dev, TESTCSR, 0x000000f0); + + if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) + return -EBUSY; + + rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00213223); + rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518); + + rt2x00pci_register_read(rt2x00dev, MACCSR2, ®); + rt2x00_set_field32(®, MACCSR2_DELAY, 64); + rt2x00pci_register_write(rt2x00dev, MACCSR2, reg); + + rt2x00pci_register_read(rt2x00dev, RALINKCSR, ®); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA0, 17); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID0, 26); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_VALID0, 1); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA1, 0); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID1, 26); + rt2x00_set_field32(®, RALINKCSR_AR_BBP_VALID1, 1); + rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg); + + rt2x00pci_register_write(rt2x00dev, BBPCSR1, 0x82188200); + + rt2x00pci_register_write(rt2x00dev, TXACKCSR0, 0x00000020); + + rt2x00pci_register_read(rt2x00dev, CSR1, ®); + rt2x00_set_field32(®, CSR1_SOFT_RESET, 1); + rt2x00_set_field32(®, CSR1_BBP_RESET, 0); + rt2x00_set_field32(®, CSR1_HOST_READY, 0); + rt2x00pci_register_write(rt2x00dev, CSR1, reg); + + rt2x00pci_register_read(rt2x00dev, CSR1, ®); + rt2x00_set_field32(®, CSR1_SOFT_RESET, 0); + rt2x00_set_field32(®, CSR1_HOST_READY, 1); + rt2x00pci_register_write(rt2x00dev, CSR1, reg); + + /* + * We must clear the FCS and FIFO error count. + * These registers are cleared on read, + * so we may pass a useless variable to store the value. + */ + rt2x00pci_register_read(rt2x00dev, CNT0, ®); + rt2x00pci_register_read(rt2x00dev, CNT4, ®); + + return 0; +} + +static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2500pci_bbp_read(rt2x00dev, 0, &value); + if ((value != 0xff) && (value != 0x00)) + goto continue_csr_init; + NOTICE(rt2x00dev, "Waiting for BBP register.\n"); + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); + return -EACCES; + +continue_csr_init: + rt2500pci_bbp_write(rt2x00dev, 3, 0x02); + rt2500pci_bbp_write(rt2x00dev, 4, 0x19); + rt2500pci_bbp_write(rt2x00dev, 14, 0x1c); + rt2500pci_bbp_write(rt2x00dev, 15, 0x30); + rt2500pci_bbp_write(rt2x00dev, 16, 0xac); + rt2500pci_bbp_write(rt2x00dev, 18, 0x18); + rt2500pci_bbp_write(rt2x00dev, 19, 0xff); + rt2500pci_bbp_write(rt2x00dev, 20, 0x1e); + rt2500pci_bbp_write(rt2x00dev, 21, 0x08); + rt2500pci_bbp_write(rt2x00dev, 22, 0x08); + rt2500pci_bbp_write(rt2x00dev, 23, 0x08); + rt2500pci_bbp_write(rt2x00dev, 24, 0x70); + rt2500pci_bbp_write(rt2x00dev, 25, 0x40); + rt2500pci_bbp_write(rt2x00dev, 26, 0x08); + rt2500pci_bbp_write(rt2x00dev, 27, 0x23); + rt2500pci_bbp_write(rt2x00dev, 30, 0x10); + rt2500pci_bbp_write(rt2x00dev, 31, 0x2b); + rt2500pci_bbp_write(rt2x00dev, 32, 0xb9); + rt2500pci_bbp_write(rt2x00dev, 34, 0x12); + rt2500pci_bbp_write(rt2x00dev, 35, 0x50); + rt2500pci_bbp_write(rt2x00dev, 39, 0xc4); + rt2500pci_bbp_write(rt2x00dev, 40, 0x02); + rt2500pci_bbp_write(rt2x00dev, 41, 0x60); + rt2500pci_bbp_write(rt2x00dev, 53, 0x10); + rt2500pci_bbp_write(rt2x00dev, 54, 0x18); + rt2500pci_bbp_write(rt2x00dev, 56, 0x08); + rt2500pci_bbp_write(rt2x00dev, 57, 0x10); + rt2500pci_bbp_write(rt2x00dev, 58, 0x08); + rt2500pci_bbp_write(rt2x00dev, 61, 0x6d); + rt2500pci_bbp_write(rt2x00dev, 62, 0x10); + + DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); + + if (eeprom != 0xffff && eeprom != 0x0000) { + reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); + value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); + DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", + reg_id, value); + rt2500pci_bbp_write(rt2x00dev, reg_id, value); + } + } + DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); + + return 0; +} + +/* + * Device state switch handlers. + */ +static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); + rt2x00_set_field32(®, RXCSR0_DISABLE_RX, + state == STATE_RADIO_RX_OFF); + rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); +} + +static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int mask = (state == STATE_RADIO_IRQ_OFF); + u32 reg; + + /* + * When interrupts are being enabled, the interrupt registers + * should clear the register to assure a clean state. + */ + if (state == STATE_RADIO_IRQ_ON) { + rt2x00pci_register_read(rt2x00dev, CSR7, ®); + rt2x00pci_register_write(rt2x00dev, CSR7, reg); + } + + /* + * Only toggle the interrupts bits we are going to use. + * Non-checked interrupt bits are disabled by default. + */ + rt2x00pci_register_read(rt2x00dev, CSR8, ®); + rt2x00_set_field32(®, CSR8_TBCN_EXPIRE, mask); + rt2x00_set_field32(®, CSR8_TXDONE_TXRING, mask); + rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, mask); + rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, mask); + rt2x00_set_field32(®, CSR8_RXDONE, mask); + rt2x00pci_register_write(rt2x00dev, CSR8, reg); +} + +static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + /* + * Initialize all registers. + */ + if (rt2500pci_init_rings(rt2x00dev) || + rt2500pci_init_registers(rt2x00dev) || + rt2500pci_init_bbp(rt2x00dev)) { + ERROR(rt2x00dev, "Register initialization failed.\n"); + return -EIO; + } + + /* + * Enable interrupts. + */ + rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); + + /* + * Enable LED + */ + rt2500pci_enable_led(rt2x00dev); + + return 0; +} + +static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + /* + * Disable LED + */ + rt2500pci_disable_led(rt2x00dev); + + rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0); + + /* + * Disable synchronisation. + */ + rt2x00pci_register_write(rt2x00dev, CSR14, 0); + + /* + * Cancel RX and TX. + */ + rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); + rt2x00_set_field32(®, TXCSR0_ABORT, 1); + rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); + + /* + * Disable interrupts. + */ + rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF); +} + +static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + u32 reg; + unsigned int i; + char put_to_sleep; + char bbp_state; + char rf_state; + + put_to_sleep = (state != STATE_AWAKE); + + rt2x00pci_register_read(rt2x00dev, PWRCSR1, ®); + rt2x00_set_field32(®, PWRCSR1_SET_STATE, 1); + rt2x00_set_field32(®, PWRCSR1_BBP_DESIRE_STATE, state); + rt2x00_set_field32(®, PWRCSR1_RF_DESIRE_STATE, state); + rt2x00_set_field32(®, PWRCSR1_PUT_TO_SLEEP, put_to_sleep); + rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg); + + /* + * Device is not guaranteed to be in the requested state yet. + * We must wait until the register indicates that the + * device has entered the correct state. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00pci_register_read(rt2x00dev, PWRCSR1, ®); + bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE); + rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE); + if (bbp_state == state && rf_state == state) + return 0; + msleep(10); + } + + NOTICE(rt2x00dev, "Device failed to enter state %d, " + "current device state: bbp %d and rf %d.\n", + state, bbp_state, rf_state); + + return -EBUSY; +} + +static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int retval = 0; + + switch (state) { + case STATE_RADIO_ON: + retval = rt2500pci_enable_radio(rt2x00dev); + break; + case STATE_RADIO_OFF: + rt2500pci_disable_radio(rt2x00dev); + break; + case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_OFF: + rt2500pci_toggle_rx(rt2x00dev, state); + break; + case STATE_DEEP_SLEEP: + case STATE_SLEEP: + case STATE_STANDBY: + case STATE_AWAKE: + retval = rt2500pci_set_state(rt2x00dev, state); + break; + default: + retval = -ENOTSUPP; + break; + } + + return retval; +} + +/* + * TX descriptor initialization + */ +static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, + struct data_desc *txd, + struct data_entry_desc *desc, + struct ieee80211_hdr *ieee80211hdr, + unsigned int length, + struct ieee80211_tx_control *control) +{ + u32 word; + + /* + * Start writing the descriptor words. + */ + rt2x00_desc_read(txd, 2, &word); + rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(&word, TXD_W2_AIFS, desc->aifs); + rt2x00_set_field32(&word, TXD_W2_CWMIN, desc->cw_min); + rt2x00_set_field32(&word, TXD_W2_CWMAX, desc->cw_max); + rt2x00_desc_write(txd, 2, word); + + rt2x00_desc_read(txd, 3, &word); + rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, desc->signal); + rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, desc->service); + rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, desc->length_low); + rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, desc->length_high); + rt2x00_desc_write(txd, 3, word); + + rt2x00_desc_read(txd, 10, &word); + rt2x00_set_field32(&word, TXD_W10_RTS, + test_bit(ENTRY_TXD_RTS_FRAME, &desc->flags)); + rt2x00_desc_write(txd, 10, word); + + rt2x00_desc_read(txd, 0, &word); + rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); + rt2x00_set_field32(&word, TXD_W0_VALID, 1); + rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, + test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_ACK, + !(control->flags & IEEE80211_TXCTL_NO_ACK)); + rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_OFDM, + test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1); + rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); + rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, + !!(control->flags & + IEEE80211_TXCTL_LONG_RETRY_LIMIT)); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length); + rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); + rt2x00_desc_write(txd, 0, word); +} + +/* + * TX data initialization + */ +static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, + unsigned int queue) +{ + u32 reg; + + if (queue == IEEE80211_TX_QUEUE_BEACON) { + rt2x00pci_register_read(rt2x00dev, CSR14, ®); + if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) { + rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); + rt2x00pci_register_write(rt2x00dev, CSR14, reg); + } + return; + } + + rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); + if (queue == IEEE80211_TX_QUEUE_DATA0) + rt2x00_set_field32(®, TXCSR0_KICK_PRIO, 1); + else if (queue == IEEE80211_TX_QUEUE_DATA1) + rt2x00_set_field32(®, TXCSR0_KICK_TX, 1); + else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON) + rt2x00_set_field32(®, TXCSR0_KICK_ATIM, 1); + rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); +} + +/* + * RX control handlers + */ +static int rt2500pci_fill_rxdone(struct data_entry *entry, + int *signal, int *rssi, int *ofdm, int *size) +{ + struct data_desc *rxd = entry->priv; + u32 word0; + u32 word2; + + rt2x00_desc_read(rxd, 0, &word0); + rt2x00_desc_read(rxd, 2, &word2); + + if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) || + rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR) || + rt2x00_get_field32(word0, RXD_W0_ICV_ERROR)) + return -EINVAL; + + *signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); + *rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - + entry->ring->rt2x00dev->rssi_offset; + *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); + *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); + + return 0; +} + +/* + * Interrupt functions. + */ +static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue) +{ + struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); + struct data_entry *entry; + struct data_desc *txd; + u32 word; + int tx_status; + int retry; + + while (!rt2x00_ring_empty(ring)) { + entry = rt2x00_get_data_entry_done(ring); + txd = entry->priv; + rt2x00_desc_read(txd, 0, &word); + + if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || + !rt2x00_get_field32(word, TXD_W0_VALID)) + break; + + /* + * Obtain the status about this packet. + */ + tx_status = rt2x00_get_field32(word, TXD_W0_RESULT); + retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); + + rt2x00lib_txdone(entry, tx_status, retry); + + /* + * Make this entry available for reuse. + */ + entry->flags = 0; + rt2x00_set_field32(&word, TXD_W0_VALID, 0); + rt2x00_desc_write(txd, 0, word); + rt2x00_ring_index_done_inc(ring); + } + + /* + * If the data ring was full before the txdone handler + * we must make sure the packet queue in the mac80211 stack + * is reenabled when the txdone handler has finished. + */ + entry = ring->entry; + if (!rt2x00_ring_full(ring)) + ieee80211_wake_queue(rt2x00dev->hw, + entry->tx_status.control.queue); +} + +static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) +{ + struct rt2x00_dev *rt2x00dev = dev_instance; + u32 reg; + + /* + * Get the interrupt sources & saved to local variable. + * Write register value back to clear pending interrupts. + */ + rt2x00pci_register_read(rt2x00dev, CSR7, ®); + rt2x00pci_register_write(rt2x00dev, CSR7, reg); + + if (!reg) + return IRQ_NONE; + + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return IRQ_HANDLED; + + /* + * Handle interrupts, walk through all bits + * and run the tasks, the bits are checked in order of + * priority. + */ + + /* + * 1 - Beacon timer expired interrupt. + */ + if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE)) + rt2x00lib_beacondone(rt2x00dev); + + /* + * 2 - Rx ring done interrupt. + */ + if (rt2x00_get_field32(reg, CSR7_RXDONE)) + rt2x00pci_rxdone(rt2x00dev); + + /* + * 3 - Atim ring transmit done interrupt. + */ + if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING)) + rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON); + + /* + * 4 - Priority ring transmit done interrupt. + */ + if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING)) + rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); + + /* + * 5 - Tx ring transmit done interrupt. + */ + if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) + rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); + + return IRQ_HANDLED; +} + +/* + * Device probe functions. + */ +static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + struct eeprom_93cx6 eeprom; + u32 reg; + u16 word; + u8 *mac; + + rt2x00pci_register_read(rt2x00dev, CSR21, ®); + + eeprom.data = rt2x00dev; + eeprom.register_read = rt2500pci_eepromregister_read; + eeprom.register_write = rt2500pci_eepromregister_write; + eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ? + PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; + eeprom.reg_data_in = 0; + eeprom.reg_data_out = 0; + eeprom.reg_data_clock = 0; + eeprom.reg_chip_select = 0; + + eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, + EEPROM_SIZE / sizeof(u16)); + + /* + * Start validation of the data that has been read. + */ + mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); + if (!is_valid_ether_addr(mac)) { + random_ether_addr(mac); + EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac)); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); + rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522); + rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); + EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); + rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); + EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI, + DEFAULT_RSSI_OFFSET); + rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word); + EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word); + } + + return 0; +} + +static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 value; + u16 eeprom; + + /* + * Read EEPROM word for configuration. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + + /* + * Identify RF chipset. + */ + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2x00pci_register_read(rt2x00dev, CSR0, ®); + rt2x00_set_chip(rt2x00dev, RT2560, value, reg); + + if (!rt2x00_rf(&rt2x00dev->chip, RF2522) && + !rt2x00_rf(&rt2x00dev->chip, RF2523) && + !rt2x00_rf(&rt2x00dev->chip, RF2524) && + !rt2x00_rf(&rt2x00dev->chip, RF2525) && + !rt2x00_rf(&rt2x00dev->chip, RF2525E) && + !rt2x00_rf(&rt2x00dev->chip, RF5222)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } + + /* + * Identify default antenna configuration. + */ + rt2x00dev->hw->conf.antenna_sel_tx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); + rt2x00dev->hw->conf.antenna_sel_rx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); + + /* + * Store led mode, for correct led behaviour. + */ + rt2x00dev->led_mode = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); + + /* + * Detect if this device has an hardware controlled radio. + */ + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) + __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags); + + /* + * Check if the BBP tuning should be enabled. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); + + if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE)) + __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); + + /* + * Read the RSSI <-> dBm offset information. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom); + rt2x00dev->rssi_offset = + rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI); + + return 0; +} + +/* + * RF value list for RF2522 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_bg_2522[] = { + { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 }, + { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 }, + { 3, 0x00002050, 0x000c2002, 0x00000101, 0 }, + { 4, 0x00002050, 0x000c2016, 0x00000101, 0 }, + { 5, 0x00002050, 0x000c202a, 0x00000101, 0 }, + { 6, 0x00002050, 0x000c203e, 0x00000101, 0 }, + { 7, 0x00002050, 0x000c2052, 0x00000101, 0 }, + { 8, 0x00002050, 0x000c2066, 0x00000101, 0 }, + { 9, 0x00002050, 0x000c207a, 0x00000101, 0 }, + { 10, 0x00002050, 0x000c208e, 0x00000101, 0 }, + { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 }, + { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 }, + { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 }, + { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 }, +}; + +/* + * RF value list for RF2523 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_bg_2523[] = { + { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b }, + { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b }, + { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b }, + { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b }, + { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b }, + { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b }, + { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b }, + { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b }, + { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b }, + { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b }, + { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b }, + { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b }, + { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b }, + { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 }, +}; + +/* + * RF value list for RF2524 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_bg_2524[] = { + { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b }, + { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b }, + { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b }, + { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b }, + { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b }, + { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b }, + { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b }, + { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b }, + { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b }, + { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b }, + { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b }, + { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b }, + { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b }, + { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 }, +}; + +/* + * RF value list for RF2525 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_bg_2525[] = { + { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b }, + { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b }, + { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b }, + { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b }, + { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b }, + { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b }, + { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b }, + { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b }, + { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b }, + { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b }, + { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b }, + { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b }, + { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b }, + { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 }, +}; + +/* + * RF value list for RF2525e + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_bg_2525e[] = { + { 1, 0x00022020, 0x00081136, 0x00060111, 0x00000a0b }, + { 2, 0x00022020, 0x0008113a, 0x00060111, 0x00000a0b }, + { 3, 0x00022020, 0x0008113e, 0x00060111, 0x00000a0b }, + { 4, 0x00022020, 0x00081182, 0x00060111, 0x00000a0b }, + { 5, 0x00022020, 0x00081186, 0x00060111, 0x00000a0b }, + { 6, 0x00022020, 0x0008118a, 0x00060111, 0x00000a0b }, + { 7, 0x00022020, 0x0008118e, 0x00060111, 0x00000a0b }, + { 8, 0x00022020, 0x00081192, 0x00060111, 0x00000a0b }, + { 9, 0x00022020, 0x00081196, 0x00060111, 0x00000a0b }, + { 10, 0x00022020, 0x0008119a, 0x00060111, 0x00000a0b }, + { 11, 0x00022020, 0x0008119e, 0x00060111, 0x00000a0b }, + { 12, 0x00022020, 0x000811a2, 0x00060111, 0x00000a0b }, + { 13, 0x00022020, 0x000811a6, 0x00060111, 0x00000a0b }, + { 14, 0x00022020, 0x000811ae, 0x00060111, 0x00000a1b }, +}; + +/* + * RF value list for RF5222 + * Supports: 2.4 GHz & 5.2 GHz + */ +static const struct rf_channel rf_vals_5222[] = { + { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b }, + { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b }, + { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b }, + { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b }, + { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b }, + { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b }, + { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b }, + { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b }, + { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b }, + { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b }, + { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b }, + { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b }, + { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b }, + { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b }, + + /* 802.11 UNI / HyperLan 2 */ + { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f }, + { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f }, + { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f }, + { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f }, + { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f }, + { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f }, + { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f }, + { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f }, + + /* 802.11 HyperLan 2 */ + { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f }, + { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f }, + { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f }, + { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f }, + { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f }, + { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f }, + { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f }, + { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f }, + { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f }, + { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f }, + + /* 802.11 UNII */ + { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f }, + { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 }, + { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 }, + { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 }, + { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 }, +}; + +static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +{ + struct hw_mode_spec *spec = &rt2x00dev->spec; + u8 *txpower; + unsigned int i; + + /* + * Initialize all hw fields. + */ + rt2x00dev->hw->flags = + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_MONITOR_DURING_OPER | + IEEE80211_HW_NO_PROBE_FILTERING; + rt2x00dev->hw->extra_tx_headroom = 0; + rt2x00dev->hw->max_signal = MAX_SIGNAL; + rt2x00dev->hw->max_rssi = MAX_RX_SSI; + rt2x00dev->hw->queues = 2; + + SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, + rt2x00_eeprom_addr(rt2x00dev, + EEPROM_MAC_ADDR_0)); + + /* + * Convert tx_power array in eeprom. + */ + txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); + for (i = 0; i < 14; i++) + txpower[i] = TXPOWER_FROM_DEV(txpower[i]); + + /* + * Initialize hw_mode information. + */ + spec->num_modes = 2; + spec->num_rates = 12; + spec->tx_power_a = NULL; + spec->tx_power_bg = txpower; + spec->tx_power_default = DEFAULT_TXPOWER; + + if (rt2x00_rf(&rt2x00dev->chip, RF2522)) { + spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); + spec->channels = rf_vals_bg_2522; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) { + spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523); + spec->channels = rf_vals_bg_2523; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) { + spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524); + spec->channels = rf_vals_bg_2524; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) { + spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525); + spec->channels = rf_vals_bg_2525; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) { + spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e); + spec->channels = rf_vals_bg_2525e; + } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) { + spec->num_channels = ARRAY_SIZE(rf_vals_5222); + spec->channels = rf_vals_5222; + spec->num_modes = 3; + } +} + +static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + int retval; + + /* + * Allocate eeprom data. + */ + retval = rt2500pci_validate_eeprom(rt2x00dev); + if (retval) + return retval; + + retval = rt2500pci_init_eeprom(rt2x00dev); + if (retval) + return retval; + + /* + * Initialize hw specifications. + */ + rt2500pci_probe_hw_mode(rt2x00dev); + + /* + * This device requires the beacon ring + */ + __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags); + + /* + * Set the rssi offset. + */ + rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + + return 0; +} + +/* + * IEEE80211 stack callback functions. + */ +static int rt2500pci_set_retry_limit(struct ieee80211_hw *hw, + u32 short_retry, u32 long_retry) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u32 reg; + + rt2x00pci_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_LONG_RETRY, long_retry); + rt2x00_set_field32(®, CSR11_SHORT_RETRY, short_retry); + rt2x00pci_register_write(rt2x00dev, CSR11, reg); + + return 0; +} + +static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u64 tsf; + u32 reg; + + rt2x00pci_register_read(rt2x00dev, CSR17, ®); + tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32; + rt2x00pci_register_read(rt2x00dev, CSR16, ®); + tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER); + + return tsf; +} + +static void rt2500pci_reset_tsf(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + rt2x00pci_register_write(rt2x00dev, CSR16, 0); + rt2x00pci_register_write(rt2x00dev, CSR17, 0); +} + +static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u32 reg; + + rt2x00pci_register_read(rt2x00dev, CSR15, ®); + return rt2x00_get_field32(reg, CSR15_BEACON_SENT); +} + +static const struct ieee80211_ops rt2500pci_mac80211_ops = { + .tx = rt2x00mac_tx, + .add_interface = rt2x00mac_add_interface, + .remove_interface = rt2x00mac_remove_interface, + .config = rt2x00mac_config, + .config_interface = rt2x00mac_config_interface, + .set_multicast_list = rt2x00mac_set_multicast_list, + .get_stats = rt2x00mac_get_stats, + .set_retry_limit = rt2500pci_set_retry_limit, + .conf_tx = rt2x00mac_conf_tx, + .get_tx_stats = rt2x00mac_get_tx_stats, + .get_tsf = rt2500pci_get_tsf, + .reset_tsf = rt2500pci_reset_tsf, + .beacon_update = rt2x00pci_beacon_update, + .tx_last_beacon = rt2500pci_tx_last_beacon, +}; + +static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = { + .irq_handler = rt2500pci_interrupt, + .probe_hw = rt2500pci_probe_hw, + .initialize = rt2x00pci_initialize, + .uninitialize = rt2x00pci_uninitialize, + .set_device_state = rt2500pci_set_device_state, +#ifdef CONFIG_RT2500PCI_RFKILL + .rfkill_poll = rt2500pci_rfkill_poll, +#endif /* CONFIG_RT2500PCI_RFKILL */ + .link_stats = rt2500pci_link_stats, + .reset_tuner = rt2500pci_reset_tuner, + .link_tuner = rt2500pci_link_tuner, + .write_tx_desc = rt2500pci_write_tx_desc, + .write_tx_data = rt2x00pci_write_tx_data, + .kick_tx_queue = rt2500pci_kick_tx_queue, + .fill_rxdone = rt2500pci_fill_rxdone, + .config_mac_addr = rt2500pci_config_mac_addr, + .config_bssid = rt2500pci_config_bssid, + .config_packet_filter = rt2500pci_config_packet_filter, + .config_type = rt2500pci_config_type, + .config = rt2500pci_config, +}; + +static const struct rt2x00_ops rt2500pci_ops = { + .name = DRV_NAME, + .rxd_size = RXD_DESC_SIZE, + .txd_size = TXD_DESC_SIZE, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .lib = &rt2500pci_rt2x00_ops, + .hw = &rt2500pci_mac80211_ops, +#ifdef CONFIG_RT2X00_LIB_DEBUGFS + .debugfs = &rt2500pci_rt2x00debug, +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ +}; + +/* + * RT2500pci module information. + */ +static struct pci_device_id rt2500pci_device_table[] = { + { PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) }, + { 0, } +}; + +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Ralink RT2500 PCI & PCMCIA Wireless LAN driver."); +MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards"); +MODULE_DEVICE_TABLE(pci, rt2500pci_device_table); +MODULE_LICENSE("GPL"); + +static struct pci_driver rt2500pci_driver = { + .name = DRV_NAME, + .id_table = rt2500pci_device_table, + .probe = rt2x00pci_probe, + .remove = __devexit_p(rt2x00pci_remove), + .suspend = rt2x00pci_suspend, + .resume = rt2x00pci_resume, +}; + +static int __init rt2500pci_init(void) +{ + return pci_register_driver(&rt2500pci_driver); +} + +static void __exit rt2500pci_exit(void) +{ + pci_unregister_driver(&rt2500pci_driver); +} + +module_init(rt2500pci_init); +module_exit(rt2500pci_exit); diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h new file mode 100644 index 000000000000..d92aa56b2f4b --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2500pci.h @@ -0,0 +1,1236 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2500pci + Abstract: Data structures and registers for the rt2500pci module. + Supported chipsets: RT2560. + */ + +#ifndef RT2500PCI_H +#define RT2500PCI_H + +/* + * RF chip defines. + */ +#define RF2522 0x0000 +#define RF2523 0x0001 +#define RF2524 0x0002 +#define RF2525 0x0003 +#define RF2525E 0x0004 +#define RF5222 0x0010 + +/* + * RT2560 version + */ +#define RT2560_VERSION_B 2 +#define RT2560_VERSION_C 3 +#define RT2560_VERSION_D 4 + +/* + * Signal information. + * Defaul offset is required for RSSI <-> dBm conversion. + */ +#define MAX_SIGNAL 100 +#define MAX_RX_SSI -1 +#define DEFAULT_RSSI_OFFSET 121 + +/* + * Register layout information. + */ +#define CSR_REG_BASE 0x0000 +#define CSR_REG_SIZE 0x0174 +#define EEPROM_BASE 0x0000 +#define EEPROM_SIZE 0x0200 +#define BBP_SIZE 0x0040 +#define RF_SIZE 0x0014 + +/* + * Control/Status Registers(CSR). + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * CSR0: ASIC revision number. + */ +#define CSR0 0x0000 + +/* + * CSR1: System control register. + * SOFT_RESET: Software reset, 1: reset, 0: normal. + * BBP_RESET: Hardware reset, 1: reset, 0, release. + * HOST_READY: Host ready after initialization. + */ +#define CSR1 0x0004 +#define CSR1_SOFT_RESET FIELD32(0x00000001) +#define CSR1_BBP_RESET FIELD32(0x00000002) +#define CSR1_HOST_READY FIELD32(0x00000004) + +/* + * CSR2: System admin status register (invalid). + */ +#define CSR2 0x0008 + +/* + * CSR3: STA MAC address register 0. + */ +#define CSR3 0x000c +#define CSR3_BYTE0 FIELD32(0x000000ff) +#define CSR3_BYTE1 FIELD32(0x0000ff00) +#define CSR3_BYTE2 FIELD32(0x00ff0000) +#define CSR3_BYTE3 FIELD32(0xff000000) + +/* + * CSR4: STA MAC address register 1. + */ +#define CSR4 0x0010 +#define CSR4_BYTE4 FIELD32(0x000000ff) +#define CSR4_BYTE5 FIELD32(0x0000ff00) + +/* + * CSR5: BSSID register 0. + */ +#define CSR5 0x0014 +#define CSR5_BYTE0 FIELD32(0x000000ff) +#define CSR5_BYTE1 FIELD32(0x0000ff00) +#define CSR5_BYTE2 FIELD32(0x00ff0000) +#define CSR5_BYTE3 FIELD32(0xff000000) + +/* + * CSR6: BSSID register 1. + */ +#define CSR6 0x0018 +#define CSR6_BYTE4 FIELD32(0x000000ff) +#define CSR6_BYTE5 FIELD32(0x0000ff00) + +/* + * CSR7: Interrupt source register. + * Write 1 to clear. + * TBCN_EXPIRE: Beacon timer expired interrupt. + * TWAKE_EXPIRE: Wakeup timer expired interrupt. + * TATIMW_EXPIRE: Timer of atim window expired interrupt. + * TXDONE_TXRING: Tx ring transmit done interrupt. + * TXDONE_ATIMRING: Atim ring transmit done interrupt. + * TXDONE_PRIORING: Priority ring transmit done interrupt. + * RXDONE: Receive done interrupt. + * DECRYPTION_DONE: Decryption done interrupt. + * ENCRYPTION_DONE: Encryption done interrupt. + * UART1_TX_TRESHOLD: UART1 TX reaches threshold. + * UART1_RX_TRESHOLD: UART1 RX reaches threshold. + * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold. + * UART1_TX_BUFF_ERROR: UART1 TX buffer error. + * UART1_RX_BUFF_ERROR: UART1 RX buffer error. + * UART2_TX_TRESHOLD: UART2 TX reaches threshold. + * UART2_RX_TRESHOLD: UART2 RX reaches threshold. + * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold. + * UART2_TX_BUFF_ERROR: UART2 TX buffer error. + * UART2_RX_BUFF_ERROR: UART2 RX buffer error. + * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period). + + */ +#define CSR7 0x001c +#define CSR7_TBCN_EXPIRE FIELD32(0x00000001) +#define CSR7_TWAKE_EXPIRE FIELD32(0x00000002) +#define CSR7_TATIMW_EXPIRE FIELD32(0x00000004) +#define CSR7_TXDONE_TXRING FIELD32(0x00000008) +#define CSR7_TXDONE_ATIMRING FIELD32(0x00000010) +#define CSR7_TXDONE_PRIORING FIELD32(0x00000020) +#define CSR7_RXDONE FIELD32(0x00000040) +#define CSR7_DECRYPTION_DONE FIELD32(0x00000080) +#define CSR7_ENCRYPTION_DONE FIELD32(0x00000100) +#define CSR7_UART1_TX_TRESHOLD FIELD32(0x00000200) +#define CSR7_UART1_RX_TRESHOLD FIELD32(0x00000400) +#define CSR7_UART1_IDLE_TRESHOLD FIELD32(0x00000800) +#define CSR7_UART1_TX_BUFF_ERROR FIELD32(0x00001000) +#define CSR7_UART1_RX_BUFF_ERROR FIELD32(0x00002000) +#define CSR7_UART2_TX_TRESHOLD FIELD32(0x00004000) +#define CSR7_UART2_RX_TRESHOLD FIELD32(0x00008000) +#define CSR7_UART2_IDLE_TRESHOLD FIELD32(0x00010000) +#define CSR7_UART2_TX_BUFF_ERROR FIELD32(0x00020000) +#define CSR7_UART2_RX_BUFF_ERROR FIELD32(0x00040000) +#define CSR7_TIMER_CSR3_EXPIRE FIELD32(0x00080000) + +/* + * CSR8: Interrupt mask register. + * Write 1 to mask interrupt. + * TBCN_EXPIRE: Beacon timer expired interrupt. + * TWAKE_EXPIRE: Wakeup timer expired interrupt. + * TATIMW_EXPIRE: Timer of atim window expired interrupt. + * TXDONE_TXRING: Tx ring transmit done interrupt. + * TXDONE_ATIMRING: Atim ring transmit done interrupt. + * TXDONE_PRIORING: Priority ring transmit done interrupt. + * RXDONE: Receive done interrupt. + * DECRYPTION_DONE: Decryption done interrupt. + * ENCRYPTION_DONE: Encryption done interrupt. + * UART1_TX_TRESHOLD: UART1 TX reaches threshold. + * UART1_RX_TRESHOLD: UART1 RX reaches threshold. + * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold. + * UART1_TX_BUFF_ERROR: UART1 TX buffer error. + * UART1_RX_BUFF_ERROR: UART1 RX buffer error. + * UART2_TX_TRESHOLD: UART2 TX reaches threshold. + * UART2_RX_TRESHOLD: UART2 RX reaches threshold. + * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold. + * UART2_TX_BUFF_ERROR: UART2 TX buffer error. + * UART2_RX_BUFF_ERROR: UART2 RX buffer error. + * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period). + */ +#define CSR8 0x0020 +#define CSR8_TBCN_EXPIRE FIELD32(0x00000001) +#define CSR8_TWAKE_EXPIRE FIELD32(0x00000002) +#define CSR8_TATIMW_EXPIRE FIELD32(0x00000004) +#define CSR8_TXDONE_TXRING FIELD32(0x00000008) +#define CSR8_TXDONE_ATIMRING FIELD32(0x00000010) +#define CSR8_TXDONE_PRIORING FIELD32(0x00000020) +#define CSR8_RXDONE FIELD32(0x00000040) +#define CSR8_DECRYPTION_DONE FIELD32(0x00000080) +#define CSR8_ENCRYPTION_DONE FIELD32(0x00000100) +#define CSR8_UART1_TX_TRESHOLD FIELD32(0x00000200) +#define CSR8_UART1_RX_TRESHOLD FIELD32(0x00000400) +#define CSR8_UART1_IDLE_TRESHOLD FIELD32(0x00000800) +#define CSR8_UART1_TX_BUFF_ERROR FIELD32(0x00001000) +#define CSR8_UART1_RX_BUFF_ERROR FIELD32(0x00002000) +#define CSR8_UART2_TX_TRESHOLD FIELD32(0x00004000) +#define CSR8_UART2_RX_TRESHOLD FIELD32(0x00008000) +#define CSR8_UART2_IDLE_TRESHOLD FIELD32(0x00010000) +#define CSR8_UART2_TX_BUFF_ERROR FIELD32(0x00020000) +#define CSR8_UART2_RX_BUFF_ERROR FIELD32(0x00040000) +#define CSR8_TIMER_CSR3_EXPIRE FIELD32(0x00080000) + +/* + * CSR9: Maximum frame length register. + * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12. + */ +#define CSR9 0x0024 +#define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80) + +/* + * SECCSR0: WEP control register. + * KICK_DECRYPT: Kick decryption engine, self-clear. + * ONE_SHOT: 0: ring mode, 1: One shot only mode. + * DESC_ADDRESS: Descriptor physical address of frame. + */ +#define SECCSR0 0x0028 +#define SECCSR0_KICK_DECRYPT FIELD32(0x00000001) +#define SECCSR0_ONE_SHOT FIELD32(0x00000002) +#define SECCSR0_DESC_ADDRESS FIELD32(0xfffffffc) + +/* + * CSR11: Back-off control register. + * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1). + * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1). + * SLOT_TIME: Slot time, default is 20us for 802.11b + * CW_SELECT: CWmin/CWmax selection, 1: Register, 0: TXD. + * LONG_RETRY: Long retry count. + * SHORT_RETRY: Short retry count. + */ +#define CSR11 0x002c +#define CSR11_CWMIN FIELD32(0x0000000f) +#define CSR11_CWMAX FIELD32(0x000000f0) +#define CSR11_SLOT_TIME FIELD32(0x00001f00) +#define CSR11_CW_SELECT FIELD32(0x00002000) +#define CSR11_LONG_RETRY FIELD32(0x00ff0000) +#define CSR11_SHORT_RETRY FIELD32(0xff000000) + +/* + * CSR12: Synchronization configuration register 0. + * All units in 1/16 TU. + * BEACON_INTERVAL: Beacon interval, default is 100 TU. + * CFP_MAX_DURATION: Cfp maximum duration, default is 100 TU. + */ +#define CSR12 0x0030 +#define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff) +#define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000) + +/* + * CSR13: Synchronization configuration register 1. + * All units in 1/16 TU. + * ATIMW_DURATION: Atim window duration. + * CFP_PERIOD: Cfp period, default is 0 TU. + */ +#define CSR13 0x0034 +#define CSR13_ATIMW_DURATION FIELD32(0x0000ffff) +#define CSR13_CFP_PERIOD FIELD32(0x00ff0000) + +/* + * CSR14: Synchronization control register. + * TSF_COUNT: Enable tsf auto counting. + * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. + * TBCN: Enable tbcn with reload value. + * TCFP: Enable tcfp & cfp / cp switching. + * TATIMW: Enable tatimw & atim window switching. + * BEACON_GEN: Enable beacon generator. + * CFP_COUNT_PRELOAD: Cfp count preload value. + * TBCM_PRELOAD: Tbcn preload value in units of 64us. + */ +#define CSR14 0x0038 +#define CSR14_TSF_COUNT FIELD32(0x00000001) +#define CSR14_TSF_SYNC FIELD32(0x00000006) +#define CSR14_TBCN FIELD32(0x00000008) +#define CSR14_TCFP FIELD32(0x00000010) +#define CSR14_TATIMW FIELD32(0x00000020) +#define CSR14_BEACON_GEN FIELD32(0x00000040) +#define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00) +#define CSR14_TBCM_PRELOAD FIELD32(0xffff0000) + +/* + * CSR15: Synchronization status register. + * CFP: ASIC is in contention-free period. + * ATIMW: ASIC is in ATIM window. + * BEACON_SENT: Beacon is send. + */ +#define CSR15 0x003c +#define CSR15_CFP FIELD32(0x00000001) +#define CSR15_ATIMW FIELD32(0x00000002) +#define CSR15_BEACON_SENT FIELD32(0x00000004) + +/* + * CSR16: TSF timer register 0. + */ +#define CSR16 0x0040 +#define CSR16_LOW_TSFTIMER FIELD32(0xffffffff) + +/* + * CSR17: TSF timer register 1. + */ +#define CSR17 0x0044 +#define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff) + +/* + * CSR18: IFS timer register 0. + * SIFS: Sifs, default is 10 us. + * PIFS: Pifs, default is 30 us. + */ +#define CSR18 0x0048 +#define CSR18_SIFS FIELD32(0x000001ff) +#define CSR18_PIFS FIELD32(0x001f0000) + +/* + * CSR19: IFS timer register 1. + * DIFS: Difs, default is 50 us. + * EIFS: Eifs, default is 364 us. + */ +#define CSR19 0x004c +#define CSR19_DIFS FIELD32(0x0000ffff) +#define CSR19_EIFS FIELD32(0xffff0000) + +/* + * CSR20: Wakeup timer register. + * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU. + * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. + * AUTOWAKE: Enable auto wakeup / sleep mechanism. + */ +#define CSR20 0x0050 +#define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff) +#define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000) +#define CSR20_AUTOWAKE FIELD32(0x01000000) + +/* + * CSR21: EEPROM control register. + * RELOAD: Write 1 to reload eeprom content. + * TYPE_93C46: 1: 93c46, 0:93c66. + */ +#define CSR21 0x0054 +#define CSR21_RELOAD FIELD32(0x00000001) +#define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002) +#define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004) +#define CSR21_EEPROM_DATA_IN FIELD32(0x00000008) +#define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010) +#define CSR21_TYPE_93C46 FIELD32(0x00000020) + +/* + * CSR22: CFP control register. + * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU. + * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain. + */ +#define CSR22 0x0058 +#define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff) +#define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000) + +/* + * Transmit related CSRs. + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * TXCSR0: TX Control Register. + * KICK_TX: Kick tx ring. + * KICK_ATIM: Kick atim ring. + * KICK_PRIO: Kick priority ring. + * ABORT: Abort all transmit related ring operation. + */ +#define TXCSR0 0x0060 +#define TXCSR0_KICK_TX FIELD32(0x00000001) +#define TXCSR0_KICK_ATIM FIELD32(0x00000002) +#define TXCSR0_KICK_PRIO FIELD32(0x00000004) +#define TXCSR0_ABORT FIELD32(0x00000008) + +/* + * TXCSR1: TX Configuration Register. + * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps. + * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps. + * TSF_OFFSET: Insert tsf offset. + * AUTORESPONDER: Enable auto responder which include ack & cts. + */ +#define TXCSR1 0x0064 +#define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff) +#define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00) +#define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000) +#define TXCSR1_AUTORESPONDER FIELD32(0x01000000) + +/* + * TXCSR2: Tx descriptor configuration register. + * TXD_SIZE: Tx descriptor size, default is 48. + * NUM_TXD: Number of tx entries in ring. + * NUM_ATIM: Number of atim entries in ring. + * NUM_PRIO: Number of priority entries in ring. + */ +#define TXCSR2 0x0068 +#define TXCSR2_TXD_SIZE FIELD32(0x000000ff) +#define TXCSR2_NUM_TXD FIELD32(0x0000ff00) +#define TXCSR2_NUM_ATIM FIELD32(0x00ff0000) +#define TXCSR2_NUM_PRIO FIELD32(0xff000000) + +/* + * TXCSR3: TX Ring Base address register. + */ +#define TXCSR3 0x006c +#define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff) + +/* + * TXCSR4: TX Atim Ring Base address register. + */ +#define TXCSR4 0x0070 +#define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff) + +/* + * TXCSR5: TX Prio Ring Base address register. + */ +#define TXCSR5 0x0074 +#define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff) + +/* + * TXCSR6: Beacon Base address register. + */ +#define TXCSR6 0x0078 +#define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff) + +/* + * TXCSR7: Auto responder control register. + * AR_POWERMANAGEMENT: Auto responder power management bit. + */ +#define TXCSR7 0x007c +#define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001) + +/* + * TXCSR8: CCK Tx BBP register. + */ +#define TXCSR8 0x0098 +#define TXCSR8_BBP_ID0 FIELD32(0x0000007f) +#define TXCSR8_BBP_ID0_VALID FIELD32(0x00000080) +#define TXCSR8_BBP_ID1 FIELD32(0x00007f00) +#define TXCSR8_BBP_ID1_VALID FIELD32(0x00008000) +#define TXCSR8_BBP_ID2 FIELD32(0x007f0000) +#define TXCSR8_BBP_ID2_VALID FIELD32(0x00800000) +#define TXCSR8_BBP_ID3 FIELD32(0x7f000000) +#define TXCSR8_BBP_ID3_VALID FIELD32(0x80000000) + +/* + * TXCSR9: OFDM TX BBP registers + * OFDM_SIGNAL: BBP rate field address for OFDM. + * OFDM_SERVICE: BBP service field address for OFDM. + * OFDM_LENGTH_LOW: BBP length low byte address for OFDM. + * OFDM_LENGTH_HIGH: BBP length high byte address for OFDM. + */ +#define TXCSR9 0x0094 +#define TXCSR9_OFDM_RATE FIELD32(0x000000ff) +#define TXCSR9_OFDM_SERVICE FIELD32(0x0000ff00) +#define TXCSR9_OFDM_LENGTH_LOW FIELD32(0x00ff0000) +#define TXCSR9_OFDM_LENGTH_HIGH FIELD32(0xff000000) + +/* + * Receive related CSRs. + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * RXCSR0: RX Control Register. + * DISABLE_RX: Disable rx engine. + * DROP_CRC: Drop crc error. + * DROP_PHYSICAL: Drop physical error. + * DROP_CONTROL: Drop control frame. + * DROP_NOT_TO_ME: Drop not to me unicast frame. + * DROP_TODS: Drop frame tods bit is true. + * DROP_VERSION_ERROR: Drop version error frame. + * PASS_CRC: Pass all packets with crc attached. + * PASS_CRC: Pass all packets with crc attached. + * PASS_PLCP: Pass all packets with 4 bytes PLCP attached. + * DROP_MCAST: Drop multicast frames. + * DROP_BCAST: Drop broadcast frames. + * ENABLE_QOS: Accept QOS data frame and parse QOS field. + */ +#define RXCSR0 0x0080 +#define RXCSR0_DISABLE_RX FIELD32(0x00000001) +#define RXCSR0_DROP_CRC FIELD32(0x00000002) +#define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004) +#define RXCSR0_DROP_CONTROL FIELD32(0x00000008) +#define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010) +#define RXCSR0_DROP_TODS FIELD32(0x00000020) +#define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040) +#define RXCSR0_PASS_CRC FIELD32(0x00000080) +#define RXCSR0_PASS_PLCP FIELD32(0x00000100) +#define RXCSR0_DROP_MCAST FIELD32(0x00000200) +#define RXCSR0_DROP_BCAST FIELD32(0x00000400) +#define RXCSR0_ENABLE_QOS FIELD32(0x00000800) + +/* + * RXCSR1: RX descriptor configuration register. + * RXD_SIZE: Rx descriptor size, default is 32b. + * NUM_RXD: Number of rx entries in ring. + */ +#define RXCSR1 0x0084 +#define RXCSR1_RXD_SIZE FIELD32(0x000000ff) +#define RXCSR1_NUM_RXD FIELD32(0x0000ff00) + +/* + * RXCSR2: RX Ring base address register. + */ +#define RXCSR2 0x0088 +#define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff) + +/* + * RXCSR3: BBP ID register for Rx operation. + * BBP_ID#: BBP register # id. + * BBP_ID#_VALID: BBP register # id is valid or not. + */ +#define RXCSR3 0x0090 +#define RXCSR3_BBP_ID0 FIELD32(0x0000007f) +#define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080) +#define RXCSR3_BBP_ID1 FIELD32(0x00007f00) +#define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000) +#define RXCSR3_BBP_ID2 FIELD32(0x007f0000) +#define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000) +#define RXCSR3_BBP_ID3 FIELD32(0x7f000000) +#define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000) + +/* + * ARCSR1: Auto Responder PLCP config register 1. + * AR_BBP_DATA#: Auto responder BBP register # data. + * AR_BBP_ID#: Auto responder BBP register # Id. + */ +#define ARCSR1 0x009c +#define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff) +#define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00) +#define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000) +#define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000) + +/* + * Miscellaneous Registers. + * Some values are set in TU, whereas 1 TU == 1024 us. + + */ + +/* + * PCICSR: PCI control register. + * BIG_ENDIAN: 1: big endian, 0: little endian. + * RX_TRESHOLD: Rx threshold in dw to start pci access + * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw. + * TX_TRESHOLD: Tx threshold in dw to start pci access + * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward. + * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw. + * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational. + * READ_MULTIPLE: Enable memory read multiple. + * WRITE_INVALID: Enable memory write & invalid. + */ +#define PCICSR 0x008c +#define PCICSR_BIG_ENDIAN FIELD32(0x00000001) +#define PCICSR_RX_TRESHOLD FIELD32(0x00000006) +#define PCICSR_TX_TRESHOLD FIELD32(0x00000018) +#define PCICSR_BURST_LENTH FIELD32(0x00000060) +#define PCICSR_ENABLE_CLK FIELD32(0x00000080) +#define PCICSR_READ_MULTIPLE FIELD32(0x00000100) +#define PCICSR_WRITE_INVALID FIELD32(0x00000200) + +/* + * CNT0: FCS error count. + * FCS_ERROR: FCS error count, cleared when read. + */ +#define CNT0 0x00a0 +#define CNT0_FCS_ERROR FIELD32(0x0000ffff) + +/* + * Statistic Register. + * CNT1: PLCP error count. + * CNT2: Long error count. + */ +#define TIMECSR2 0x00a8 +#define CNT1 0x00ac +#define CNT2 0x00b0 +#define TIMECSR3 0x00b4 + +/* + * CNT3: CCA false alarm count. + */ +#define CNT3 0x00b8 +#define CNT3_FALSE_CCA FIELD32(0x0000ffff) + +/* + * Statistic Register. + * CNT4: Rx FIFO overflow count. + * CNT5: Tx FIFO underrun count. + */ +#define CNT4 0x00bc +#define CNT5 0x00c0 + +/* + * Baseband Control Register. + */ + +/* + * PWRCSR0: Power mode configuration register. + */ +#define PWRCSR0 0x00c4 + +/* + * Power state transition time registers. + */ +#define PSCSR0 0x00c8 +#define PSCSR1 0x00cc +#define PSCSR2 0x00d0 +#define PSCSR3 0x00d4 + +/* + * PWRCSR1: Manual power control / status register. + * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake. + * SET_STATE: Set state. Write 1 to trigger, self cleared. + * BBP_DESIRE_STATE: BBP desired state. + * RF_DESIRE_STATE: RF desired state. + * BBP_CURR_STATE: BBP current state. + * RF_CURR_STATE: RF current state. + * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared. + */ +#define PWRCSR1 0x00d8 +#define PWRCSR1_SET_STATE FIELD32(0x00000001) +#define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006) +#define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018) +#define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060) +#define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180) +#define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200) + +/* + * TIMECSR: Timer control register. + * US_COUNT: 1 us timer count in units of clock cycles. + * US_64_COUNT: 64 us timer count in units of 1 us timer. + * BEACON_EXPECT: Beacon expect window. + */ +#define TIMECSR 0x00dc +#define TIMECSR_US_COUNT FIELD32(0x000000ff) +#define TIMECSR_US_64_COUNT FIELD32(0x0000ff00) +#define TIMECSR_BEACON_EXPECT FIELD32(0x00070000) + +/* + * MACCSR0: MAC configuration register 0. + */ +#define MACCSR0 0x00e0 + +/* + * MACCSR1: MAC configuration register 1. + * KICK_RX: Kick one-shot rx in one-shot rx mode. + * ONESHOT_RXMODE: Enable one-shot rx mode for debugging. + * BBPRX_RESET_MODE: Ralink bbp rx reset mode. + * AUTO_TXBBP: Auto tx logic access bbp control register. + * AUTO_RXBBP: Auto rx logic access bbp control register. + * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd. + * INTERSIL_IF: Intersil if calibration pin. + */ +#define MACCSR1 0x00e4 +#define MACCSR1_KICK_RX FIELD32(0x00000001) +#define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002) +#define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004) +#define MACCSR1_AUTO_TXBBP FIELD32(0x00000008) +#define MACCSR1_AUTO_RXBBP FIELD32(0x00000010) +#define MACCSR1_LOOPBACK FIELD32(0x00000060) +#define MACCSR1_INTERSIL_IF FIELD32(0x00000080) + +/* + * RALINKCSR: Ralink Rx auto-reset BBCR. + * AR_BBP_DATA#: Auto reset BBP register # data. + * AR_BBP_ID#: Auto reset BBP register # id. + */ +#define RALINKCSR 0x00e8 +#define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff) +#define RALINKCSR_AR_BBP_ID0 FIELD32(0x00007f00) +#define RALINKCSR_AR_BBP_VALID0 FIELD32(0x00008000) +#define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000) +#define RALINKCSR_AR_BBP_ID1 FIELD32(0x7f000000) +#define RALINKCSR_AR_BBP_VALID1 FIELD32(0x80000000) + +/* + * BCNCSR: Beacon interval control register. + * CHANGE: Write one to change beacon interval. + * DELTATIME: The delta time value. + * NUM_BEACON: Number of beacon according to mode. + * MODE: Please refer to asic specs. + * PLUS: Plus or minus delta time value. + */ +#define BCNCSR 0x00ec +#define BCNCSR_CHANGE FIELD32(0x00000001) +#define BCNCSR_DELTATIME FIELD32(0x0000001e) +#define BCNCSR_NUM_BEACON FIELD32(0x00001fe0) +#define BCNCSR_MODE FIELD32(0x00006000) +#define BCNCSR_PLUS FIELD32(0x00008000) + +/* + * BBP / RF / IF Control Register. + */ + +/* + * BBPCSR: BBP serial control register. + * VALUE: Register value to program into BBP. + * REGNUM: Selected BBP register. + * BUSY: 1: asic is busy execute BBP programming. + * WRITE_CONTROL: 1: write BBP, 0: read BBP. + */ +#define BBPCSR 0x00f0 +#define BBPCSR_VALUE FIELD32(0x000000ff) +#define BBPCSR_REGNUM FIELD32(0x00007f00) +#define BBPCSR_BUSY FIELD32(0x00008000) +#define BBPCSR_WRITE_CONTROL FIELD32(0x00010000) + +/* + * RFCSR: RF serial control register. + * VALUE: Register value + id to program into rf/if. + * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22). + * IF_SELECT: Chip to program: 0: rf, 1: if. + * PLL_LD: Rf pll_ld status. + * BUSY: 1: asic is busy execute rf programming. + */ +#define RFCSR 0x00f4 +#define RFCSR_VALUE FIELD32(0x00ffffff) +#define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000) +#define RFCSR_IF_SELECT FIELD32(0x20000000) +#define RFCSR_PLL_LD FIELD32(0x40000000) +#define RFCSR_BUSY FIELD32(0x80000000) + +/* + * LEDCSR: LED control register. + * ON_PERIOD: On period, default 70ms. + * OFF_PERIOD: Off period, default 30ms. + * LINK: 0: linkoff, 1: linkup. + * ACTIVITY: 0: idle, 1: active. + * LINK_POLARITY: 0: active low, 1: active high. + * ACTIVITY_POLARITY: 0: active low, 1: active high. + * LED_DEFAULT: LED state for "enable" 0: ON, 1: OFF. + */ +#define LEDCSR 0x00f8 +#define LEDCSR_ON_PERIOD FIELD32(0x000000ff) +#define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00) +#define LEDCSR_LINK FIELD32(0x00010000) +#define LEDCSR_ACTIVITY FIELD32(0x00020000) +#define LEDCSR_LINK_POLARITY FIELD32(0x00040000) +#define LEDCSR_ACTIVITY_POLARITY FIELD32(0x00080000) +#define LEDCSR_LED_DEFAULT FIELD32(0x00100000) + +/* + * AES control register. + */ +#define SECCSR3 0x00fc + +/* + * ASIC pointer information. + * RXPTR: Current RX ring address. + * TXPTR: Current Tx ring address. + * PRIPTR: Current Priority ring address. + * ATIMPTR: Current ATIM ring address. + */ +#define RXPTR 0x0100 +#define TXPTR 0x0104 +#define PRIPTR 0x0108 +#define ATIMPTR 0x010c + +/* + * TXACKCSR0: TX ACK timeout. + */ +#define TXACKCSR0 0x0110 + +/* + * ACK timeout count registers. + * ACKCNT0: TX ACK timeout count. + * ACKCNT1: RX ACK timeout count. + */ +#define ACKCNT0 0x0114 +#define ACKCNT1 0x0118 + +/* + * GPIO and others. + */ + +/* + * GPIOCSR: GPIO control register. + */ +#define GPIOCSR 0x0120 +#define GPIOCSR_BIT0 FIELD32(0x00000001) +#define GPIOCSR_BIT1 FIELD32(0x00000002) +#define GPIOCSR_BIT2 FIELD32(0x00000004) +#define GPIOCSR_BIT3 FIELD32(0x00000008) +#define GPIOCSR_BIT4 FIELD32(0x00000010) +#define GPIOCSR_BIT5 FIELD32(0x00000020) +#define GPIOCSR_BIT6 FIELD32(0x00000040) +#define GPIOCSR_BIT7 FIELD32(0x00000080) +#define GPIOCSR_DIR0 FIELD32(0x00000100) +#define GPIOCSR_DIR1 FIELD32(0x00000200) +#define GPIOCSR_DIR2 FIELD32(0x00000400) +#define GPIOCSR_DIR3 FIELD32(0x00000800) +#define GPIOCSR_DIR4 FIELD32(0x00001000) +#define GPIOCSR_DIR5 FIELD32(0x00002000) +#define GPIOCSR_DIR6 FIELD32(0x00004000) +#define GPIOCSR_DIR7 FIELD32(0x00008000) + +/* + * FIFO pointer registers. + * FIFOCSR0: TX FIFO pointer. + * FIFOCSR1: RX FIFO pointer. + */ +#define FIFOCSR0 0x0128 +#define FIFOCSR1 0x012c + +/* + * BCNCSR1: Tx BEACON offset time control register. + * PRELOAD: Beacon timer offset in units of usec. + * BEACON_CWMIN: 2^CwMin. + */ +#define BCNCSR1 0x0130 +#define BCNCSR1_PRELOAD FIELD32(0x0000ffff) +#define BCNCSR1_BEACON_CWMIN FIELD32(0x000f0000) + +/* + * MACCSR2: TX_PE to RX_PE turn-around time control register + * DELAY: RX_PE low width, in units of pci clock cycle. + */ +#define MACCSR2 0x0134 +#define MACCSR2_DELAY FIELD32(0x000000ff) + +/* + * TESTCSR: TEST mode selection register. + */ +#define TESTCSR 0x0138 + +/* + * ARCSR2: 1 Mbps ACK/CTS PLCP. + */ +#define ARCSR2 0x013c +#define ARCSR2_SIGNAL FIELD32(0x000000ff) +#define ARCSR2_SERVICE FIELD32(0x0000ff00) +#define ARCSR2_LENGTH FIELD32(0xffff0000) + +/* + * ARCSR3: 2 Mbps ACK/CTS PLCP. + */ +#define ARCSR3 0x0140 +#define ARCSR3_SIGNAL FIELD32(0x000000ff) +#define ARCSR3_SERVICE FIELD32(0x0000ff00) +#define ARCSR3_LENGTH FIELD32(0xffff0000) + +/* + * ARCSR4: 5.5 Mbps ACK/CTS PLCP. + */ +#define ARCSR4 0x0144 +#define ARCSR4_SIGNAL FIELD32(0x000000ff) +#define ARCSR4_SERVICE FIELD32(0x0000ff00) +#define ARCSR4_LENGTH FIELD32(0xffff0000) + +/* + * ARCSR5: 11 Mbps ACK/CTS PLCP. + */ +#define ARCSR5 0x0148 +#define ARCSR5_SIGNAL FIELD32(0x000000ff) +#define ARCSR5_SERVICE FIELD32(0x0000ff00) +#define ARCSR5_LENGTH FIELD32(0xffff0000) + +/* + * ARTCSR0: CCK ACK/CTS payload consumed time for 1/2/5.5/11 mbps. + */ +#define ARTCSR0 0x014c +#define ARTCSR0_ACK_CTS_11MBS FIELD32(0x000000ff) +#define ARTCSR0_ACK_CTS_5_5MBS FIELD32(0x0000ff00) +#define ARTCSR0_ACK_CTS_2MBS FIELD32(0x00ff0000) +#define ARTCSR0_ACK_CTS_1MBS FIELD32(0xff000000) + + +/* + * ARTCSR1: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps. + */ +#define ARTCSR1 0x0150 +#define ARTCSR1_ACK_CTS_6MBS FIELD32(0x000000ff) +#define ARTCSR1_ACK_CTS_9MBS FIELD32(0x0000ff00) +#define ARTCSR1_ACK_CTS_12MBS FIELD32(0x00ff0000) +#define ARTCSR1_ACK_CTS_18MBS FIELD32(0xff000000) + +/* + * ARTCSR2: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps. + */ +#define ARTCSR2 0x0154 +#define ARTCSR2_ACK_CTS_24MBS FIELD32(0x000000ff) +#define ARTCSR2_ACK_CTS_36MBS FIELD32(0x0000ff00) +#define ARTCSR2_ACK_CTS_48MBS FIELD32(0x00ff0000) +#define ARTCSR2_ACK_CTS_54MBS FIELD32(0xff000000) + +/* + * SECCSR1_RT2509: WEP control register. + * KICK_ENCRYPT: Kick encryption engine, self-clear. + * ONE_SHOT: 0: ring mode, 1: One shot only mode. + * DESC_ADDRESS: Descriptor physical address of frame. + */ +#define SECCSR1 0x0158 +#define SECCSR1_KICK_ENCRYPT FIELD32(0x00000001) +#define SECCSR1_ONE_SHOT FIELD32(0x00000002) +#define SECCSR1_DESC_ADDRESS FIELD32(0xfffffffc) + +/* + * BBPCSR1: BBP TX configuration. + */ +#define BBPCSR1 0x015c +#define BBPCSR1_CCK FIELD32(0x00000003) +#define BBPCSR1_CCK_FLIP FIELD32(0x00000004) +#define BBPCSR1_OFDM FIELD32(0x00030000) +#define BBPCSR1_OFDM_FLIP FIELD32(0x00040000) + +/* + * Dual band configuration registers. + * DBANDCSR0: Dual band configuration register 0. + * DBANDCSR1: Dual band configuration register 1. + */ +#define DBANDCSR0 0x0160 +#define DBANDCSR1 0x0164 + +/* + * BBPPCSR: BBP Pin control register. + */ +#define BBPPCSR 0x0168 + +/* + * MAC special debug mode selection registers. + * DBGSEL0: MAC special debug mode selection register 0. + * DBGSEL1: MAC special debug mode selection register 1. + */ +#define DBGSEL0 0x016c +#define DBGSEL1 0x0170 + +/* + * BISTCSR: BBP BIST register. + */ +#define BISTCSR 0x0174 + +/* + * Multicast filter registers. + * MCAST0: Multicast filter register 0. + * MCAST1: Multicast filter register 1. + */ +#define MCAST0 0x0178 +#define MCAST1 0x017c + +/* + * UART registers. + * UARTCSR0: UART1 TX register. + * UARTCSR1: UART1 RX register. + * UARTCSR3: UART1 frame control register. + * UARTCSR4: UART1 buffer control register. + * UART2CSR0: UART2 TX register. + * UART2CSR1: UART2 RX register. + * UART2CSR3: UART2 frame control register. + * UART2CSR4: UART2 buffer control register. + */ +#define UARTCSR0 0x0180 +#define UARTCSR1 0x0184 +#define UARTCSR3 0x0188 +#define UARTCSR4 0x018c +#define UART2CSR0 0x0190 +#define UART2CSR1 0x0194 +#define UART2CSR3 0x0198 +#define UART2CSR4 0x019c + +/* + * BBP registers. + * The wordsize of the BBP is 8 bits. + */ + +/* + * R2: TX antenna control + */ +#define BBP_R2_TX_ANTENNA FIELD8(0x03) +#define BBP_R2_TX_IQ_FLIP FIELD8(0x04) + +/* + * R14: RX antenna control + */ +#define BBP_R14_RX_ANTENNA FIELD8(0x03) +#define BBP_R14_RX_IQ_FLIP FIELD8(0x04) + +/* + * BBP_R70 + */ +#define BBP_R70_JAPAN_FILTER FIELD8(0x08) + +/* + * RF registers + */ + +/* + * RF 1 + */ +#define RF1_TUNER FIELD32(0x00020000) + +/* + * RF 3 + */ +#define RF3_TUNER FIELD32(0x00000100) +#define RF3_TXPOWER FIELD32(0x00003e00) + +/* + * EEPROM content. + * The wordsize of the EEPROM is 16 bits. + */ + +/* + * HW MAC address. + */ +#define EEPROM_MAC_ADDR_0 0x0002 +#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) +#define EEPROM_MAC_ADDR1 0x0003 +#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) +#define EEPROM_MAC_ADDR_2 0x0004 +#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) + +/* + * EEPROM antenna. + * ANTENNA_NUM: Number of antenna's. + * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. + * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. + * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd. + * DYN_TXAGC: Dynamic TX AGC control. + * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. + * RF_TYPE: Rf_type of this adapter. + */ +#define EEPROM_ANTENNA 0x10 +#define EEPROM_ANTENNA_NUM FIELD16(0x0003) +#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) +#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) +#define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0) +#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) +#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) +#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) + +/* + * EEPROM NIC config. + * CARDBUS_ACCEL: 0: enable, 1: disable. + * DYN_BBP_TUNE: 0: enable, 1: disable. + * CCK_TX_POWER: CCK TX power compensation. + */ +#define EEPROM_NIC 0x11 +#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001) +#define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002) +#define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c) + +/* + * EEPROM geography. + * GEO: Default geography setting for device. + */ +#define EEPROM_GEOGRAPHY 0x12 +#define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00) + +/* + * EEPROM BBP. + */ +#define EEPROM_BBP_START 0x13 +#define EEPROM_BBP_SIZE 16 +#define EEPROM_BBP_VALUE FIELD16(0x00ff) +#define EEPROM_BBP_REG_ID FIELD16(0xff00) + +/* + * EEPROM TXPOWER + */ +#define EEPROM_TXPOWER_START 0x23 +#define EEPROM_TXPOWER_SIZE 7 +#define EEPROM_TXPOWER_1 FIELD16(0x00ff) +#define EEPROM_TXPOWER_2 FIELD16(0xff00) + +/* + * RSSI <-> dBm offset calibration + */ +#define EEPROM_CALIBRATE_OFFSET 0x3e +#define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff) + +/* + * DMA descriptor defines. + */ +#define TXD_DESC_SIZE ( 11 * sizeof(struct data_desc) ) +#define RXD_DESC_SIZE ( 11 * sizeof(struct data_desc) ) + +/* + * TX descriptor format for TX, PRIO, ATIM and Beacon Ring. + */ + +/* + * Word0 + */ +#define TXD_W0_OWNER_NIC FIELD32(0x00000001) +#define TXD_W0_VALID FIELD32(0x00000002) +#define TXD_W0_RESULT FIELD32(0x0000001c) +#define TXD_W0_RETRY_COUNT FIELD32(0x000000e0) +#define TXD_W0_MORE_FRAG FIELD32(0x00000100) +#define TXD_W0_ACK FIELD32(0x00000200) +#define TXD_W0_TIMESTAMP FIELD32(0x00000400) +#define TXD_W0_OFDM FIELD32(0x00000800) +#define TXD_W0_CIPHER_OWNER FIELD32(0x00001000) +#define TXD_W0_IFS FIELD32(0x00006000) +#define TXD_W0_RETRY_MODE FIELD32(0x00008000) +#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) +#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000) + +/* + * Word1 + */ +#define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) + +/* + * Word2 + */ +#define TXD_W2_IV_OFFSET FIELD32(0x0000003f) +#define TXD_W2_AIFS FIELD32(0x000000c0) +#define TXD_W2_CWMIN FIELD32(0x00000f00) +#define TXD_W2_CWMAX FIELD32(0x0000f000) + +/* + * Word3: PLCP information + */ +#define TXD_W3_PLCP_SIGNAL FIELD32(0x000000ff) +#define TXD_W3_PLCP_SERVICE FIELD32(0x0000ff00) +#define TXD_W3_PLCP_LENGTH_LOW FIELD32(0x00ff0000) +#define TXD_W3_PLCP_LENGTH_HIGH FIELD32(0xff000000) + +/* + * Word4 + */ +#define TXD_W4_IV FIELD32(0xffffffff) + +/* + * Word5 + */ +#define TXD_W5_EIV FIELD32(0xffffffff) + +/* + * Word6-9: Key + */ +#define TXD_W6_KEY FIELD32(0xffffffff) +#define TXD_W7_KEY FIELD32(0xffffffff) +#define TXD_W8_KEY FIELD32(0xffffffff) +#define TXD_W9_KEY FIELD32(0xffffffff) + +/* + * Word10 + */ +#define TXD_W10_RTS FIELD32(0x00000001) +#define TXD_W10_TX_RATE FIELD32(0x000000fe) + +/* + * RX descriptor format for RX Ring. + */ + +/* + * Word0 + */ +#define RXD_W0_OWNER_NIC FIELD32(0x00000001) +#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002) +#define RXD_W0_MULTICAST FIELD32(0x00000004) +#define RXD_W0_BROADCAST FIELD32(0x00000008) +#define RXD_W0_MY_BSS FIELD32(0x00000010) +#define RXD_W0_CRC_ERROR FIELD32(0x00000020) +#define RXD_W0_OFDM FIELD32(0x00000040) +#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080) +#define RXD_W0_CIPHER_OWNER FIELD32(0x00000100) +#define RXD_W0_ICV_ERROR FIELD32(0x00000200) +#define RXD_W0_IV_OFFSET FIELD32(0x0000fc00) +#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) +#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000) + +/* + * Word1 + */ +#define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) + +/* + * Word2 + */ +#define RXD_W2_SIGNAL FIELD32(0x000000ff) +#define RXD_W2_RSSI FIELD32(0x0000ff00) +#define RXD_W2_TA FIELD32(0xffff0000) + +/* + * Word3 + */ +#define RXD_W3_TA FIELD32(0xffffffff) + +/* + * Word4 + */ +#define RXD_W4_IV FIELD32(0xffffffff) + +/* + * Word5 + */ +#define RXD_W5_EIV FIELD32(0xffffffff) + +/* + * Word6-9: Key + */ +#define RXD_W6_KEY FIELD32(0xffffffff) +#define RXD_W7_KEY FIELD32(0xffffffff) +#define RXD_W8_KEY FIELD32(0xffffffff) +#define RXD_W9_KEY FIELD32(0xffffffff) + +/* + * Word10 + */ +#define RXD_W10_DROP FIELD32(0x00000001) + +/* + * Macro's for converting txpower from EEPROM to dscape value + * and from dscape value to register value. + */ +#define MIN_TXPOWER 0 +#define MAX_TXPOWER 31 +#define DEFAULT_TXPOWER 24 + +#define TXPOWER_FROM_DEV(__txpower) \ +({ \ + ((__txpower) > MAX_TXPOWER) ? \ + DEFAULT_TXPOWER : (__txpower); \ +}) + +#define TXPOWER_TO_DEV(__txpower) \ +({ \ + ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ + (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ + (__txpower)); \ +}) + +#endif /* RT2500PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c new file mode 100644 index 000000000000..847bd7f58eed --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -0,0 +1,1837 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2500usb + Abstract: rt2500usb device specific routines. + Supported chipsets: RT2570. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt2500usb" + +#include +#include +#include +#include +#include +#include + +#include "rt2x00.h" +#include "rt2x00usb.h" +#include "rt2500usb.h" + +/* + * Register access. + * All access to the CSR registers will go through the methods + * rt2500usb_register_read and rt2500usb_register_write. + * BBP and RF register require indirect register access, + * and use the CSR registers BBPCSR and RFCSR to achieve this. + * These indirect registers work with busy bits, + * and we will try maximal REGISTER_BUSY_COUNT times to access + * the register while taking a REGISTER_BUSY_DELAY us delay + * between each attampt. When the busy bit is still set at that time, + * the access attempt is considered to have failed, + * and we will print an error. + */ +static inline void rt2500usb_register_read(const struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u16 *value) +{ + __le16 reg; + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, + USB_VENDOR_REQUEST_IN, offset, + ®, sizeof(u16), REGISTER_TIMEOUT); + *value = le16_to_cpu(reg); +} + +static inline void rt2500usb_register_multiread(const struct rt2x00_dev + *rt2x00dev, + const unsigned int offset, + void *value, const u16 length) +{ + int timeout = REGISTER_TIMEOUT * (length / sizeof(u16)); + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, + USB_VENDOR_REQUEST_IN, offset, + value, length, timeout); +} + +static inline void rt2500usb_register_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u16 value) +{ + __le16 reg = cpu_to_le16(value); + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, offset, + ®, sizeof(u16), REGISTER_TIMEOUT); +} + +static inline void rt2500usb_register_multiwrite(const struct rt2x00_dev + *rt2x00dev, + const unsigned int offset, + void *value, const u16 length) +{ + int timeout = REGISTER_TIMEOUT * (length / sizeof(u16)); + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, offset, + value, length, timeout); +} + +static u16 rt2500usb_bbp_check(const struct rt2x00_dev *rt2x00dev) +{ + u16 reg; + unsigned int i; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2500usb_register_read(rt2x00dev, PHY_CSR8, ®); + if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY)) + break; + udelay(REGISTER_BUSY_DELAY); + } + + return reg; +} + +static void rt2500usb_bbp_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u16 reg; + + /* + * Wait until the BBP becomes ready. + */ + reg = rt2500usb_bbp_check(rt2x00dev); + if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { + ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n"); + return; + } + + /* + * Write the data into the BBP. + */ + reg = 0; + rt2x00_set_field16(®, PHY_CSR7_DATA, value); + rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); + rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 0); + + rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg); +} + +static void rt2500usb_bbp_read(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u8 *value) +{ + u16 reg; + + /* + * Wait until the BBP becomes ready. + */ + reg = rt2500usb_bbp_check(rt2x00dev); + if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { + ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); + return; + } + + /* + * Write the request into the BBP. + */ + reg = 0; + rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); + rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 1); + + rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg); + + /* + * Wait until the BBP becomes ready. + */ + reg = rt2500usb_bbp_check(rt2x00dev); + if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { + ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); + *value = 0xff; + return; + } + + rt2500usb_register_read(rt2x00dev, PHY_CSR7, ®); + *value = rt2x00_get_field16(reg, PHY_CSR7_DATA); +} + +static void rt2500usb_rf_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) +{ + u16 reg; + unsigned int i; + + if (!word) + return; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2500usb_register_read(rt2x00dev, PHY_CSR10, ®); + if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY)) + goto rf_write; + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n"); + return; + +rf_write: + reg = 0; + rt2x00_set_field16(®, PHY_CSR9_RF_VALUE, value); + rt2500usb_register_write(rt2x00dev, PHY_CSR9, reg); + + reg = 0; + rt2x00_set_field16(®, PHY_CSR10_RF_VALUE, value >> 16); + rt2x00_set_field16(®, PHY_CSR10_RF_NUMBER_OF_BITS, 20); + rt2x00_set_field16(®, PHY_CSR10_RF_IF_SELECT, 0); + rt2x00_set_field16(®, PHY_CSR10_RF_BUSY, 1); + + rt2500usb_register_write(rt2x00dev, PHY_CSR10, reg); + rt2x00_rf_write(rt2x00dev, word, value); +} + +#ifdef CONFIG_RT2X00_LIB_DEBUGFS +#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u16)) ) + +static void rt2500usb_read_csr(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u32 *data) +{ + rt2500usb_register_read(rt2x00dev, CSR_OFFSET(word), (u16 *) data); +} + +static void rt2500usb_write_csr(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u32 data) +{ + rt2500usb_register_write(rt2x00dev, CSR_OFFSET(word), data); +} + +static const struct rt2x00debug rt2500usb_rt2x00debug = { + .owner = THIS_MODULE, + .csr = { + .read = rt2500usb_read_csr, + .write = rt2500usb_write_csr, + .word_size = sizeof(u16), + .word_count = CSR_REG_SIZE / sizeof(u16), + }, + .eeprom = { + .read = rt2x00_eeprom_read, + .write = rt2x00_eeprom_write, + .word_size = sizeof(u16), + .word_count = EEPROM_SIZE / sizeof(u16), + }, + .bbp = { + .read = rt2500usb_bbp_read, + .write = rt2500usb_bbp_write, + .word_size = sizeof(u8), + .word_count = BBP_SIZE / sizeof(u8), + }, + .rf = { + .read = rt2x00_rf_read, + .write = rt2500usb_rf_write, + .word_size = sizeof(u32), + .word_count = RF_SIZE / sizeof(u32), + }, +}; +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + +/* + * Configuration handlers. + */ +static void rt2500usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr) +{ + __le16 reg[3]; + + memset(®, 0, sizeof(reg)); + memcpy(®, addr, ETH_ALEN); + + /* + * The MAC address is passed to us as an array of bytes, + * that array is little endian, so no need for byte ordering. + */ + rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, ®, sizeof(reg)); +} + +static void rt2500usb_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid) +{ + __le16 reg[3]; + + memset(®, 0, sizeof(reg)); + memcpy(®, bssid, ETH_ALEN); + + /* + * The BSSID is passed to us as an array of bytes, + * that array is little endian, so no need for byte ordering. + */ + rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, ®, sizeof(reg)); +} + +static void rt2500usb_config_packet_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter) +{ + int promisc = !!(filter & IFF_PROMISC); + int multicast = !!(filter & IFF_MULTICAST); + int broadcast = !!(filter & IFF_BROADCAST); + u16 reg; + + rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); + rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, !promisc); + rt2x00_set_field16(®, TXRX_CSR2_DROP_MULTICAST, !multicast); + rt2x00_set_field16(®, TXRX_CSR2_DROP_BROADCAST, !broadcast); + rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); +} + +static void rt2500usb_config_type(struct rt2x00_dev *rt2x00dev, const int type) +{ + u16 reg; + + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); + + /* + * Apply hardware packet filter. + */ + rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); + + if (!is_monitor_present(&rt2x00dev->interface) && + (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA)) + rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, 1); + else + rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, 0); + + /* + * If there is a non-monitor interface present + * the packet should be strict (even if a monitor interface is present!). + * When there is only 1 interface present which is in monitor mode + * we should start accepting _all_ frames. + */ + if (is_interface_present(&rt2x00dev->interface)) { + rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC, 1); + rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL, 1); + rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, 1); + rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 1); + } else if (is_monitor_present(&rt2x00dev->interface)) { + rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC, 0); + rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL, 0); + rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, 0); + rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 0); + } + + rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); + + /* + * Enable beacon config + */ + rt2500usb_register_read(rt2x00dev, TXRX_CSR20, ®); + rt2x00_set_field16(®, TXRX_CSR20_OFFSET, + (PREAMBLE + get_duration(IEEE80211_HEADER, 2)) >> 6); + if (type == IEEE80211_IF_TYPE_STA) + rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 0); + else + rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 2); + rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg); + + /* + * Enable synchronisation. + */ + rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); + rt2x00_set_field16(®, TXRX_CSR18_OFFSET, 0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg); + + rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); + if (is_interface_present(&rt2x00dev->interface)) { + rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1); + rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1); + } + + rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0); + if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP) + rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 2); + else if (type == IEEE80211_IF_TYPE_STA) + rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 1); + else if (is_monitor_present(&rt2x00dev->interface) && + !is_interface_present(&rt2x00dev->interface)) + rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 0); + + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); +} + +static void rt2500usb_config_rate(struct rt2x00_dev *rt2x00dev, const int rate) +{ + struct ieee80211_conf *conf = &rt2x00dev->hw->conf; + u16 reg; + u16 value; + u16 preamble; + + if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE)) + preamble = SHORT_PREAMBLE; + else + preamble = PREAMBLE; + + reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK; + + rt2500usb_register_write(rt2x00dev, TXRX_CSR11, reg); + + rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®); + value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ? + SHORT_DIFS : DIFS) + + PLCP + preamble + get_duration(ACK_SIZE, 10); + rt2x00_set_field16(®, TXRX_CSR1_ACK_TIMEOUT, value); + rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg); + + rt2500usb_register_read(rt2x00dev, TXRX_CSR10, ®); + if (preamble == SHORT_PREAMBLE) + rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, 1); + else + rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, 0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg); +} + +static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev, + const int phymode) +{ + struct ieee80211_hw_mode *mode; + struct ieee80211_rate *rate; + + if (phymode == MODE_IEEE80211A) + rt2x00dev->curr_hwmode = HWMODE_A; + else if (phymode == MODE_IEEE80211B) + rt2x00dev->curr_hwmode = HWMODE_B; + else + rt2x00dev->curr_hwmode = HWMODE_G; + + mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode]; + rate = &mode->rates[mode->num_rates - 1]; + + rt2500usb_config_rate(rt2x00dev, rate->val2); + + if (phymode == MODE_IEEE80211B) { + rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x000b); + rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x0040); + } else { + rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0005); + rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x016c); + } +} + +static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev, + const int index, const int channel, + const int txpower) +{ + struct rf_channel reg; + + /* + * Fill rf_reg structure. + */ + memcpy(®, &rt2x00dev->spec.channels[index], sizeof(reg)); + + /* + * Set TXpower. + */ + rt2x00_set_field32(®.rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); + + /* + * For RT2525E we should first set the channel to half band higher. + */ + if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) { + static const u32 vals[] = { + 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2, + 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba, + 0x000008ba, 0x000008be, 0x000008b7, 0x00000902, + 0x00000902, 0x00000906 + }; + + rt2500usb_rf_write(rt2x00dev, 2, vals[channel - 1]); + if (reg.rf4) + rt2500usb_rf_write(rt2x00dev, 4, reg.rf4); + } + + rt2500usb_rf_write(rt2x00dev, 1, reg.rf1); + rt2500usb_rf_write(rt2x00dev, 2, reg.rf2); + rt2500usb_rf_write(rt2x00dev, 3, reg.rf3); + if (reg.rf4) + rt2500usb_rf_write(rt2x00dev, 4, reg.rf4); +} + +static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev, + const int txpower) +{ + u32 rf3; + + rt2x00_rf_read(rt2x00dev, 3, &rf3); + rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); + rt2500usb_rf_write(rt2x00dev, 3, rf3); +} + +static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, + const int antenna_tx, const int antenna_rx) +{ + u8 r2; + u8 r14; + u16 csr5; + u16 csr6; + + rt2500usb_bbp_read(rt2x00dev, 2, &r2); + rt2500usb_bbp_read(rt2x00dev, 14, &r14); + rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5); + rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6); + + /* + * Configure the TX antenna. + */ + switch (antenna_tx) { + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1); + rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1); + rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1); + break; + case ANTENNA_A: + rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0); + rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0); + rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0); + break; + case ANTENNA_B: + rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); + rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2); + rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2); + break; + } + + /* + * Configure the RX antenna. + */ + switch (antenna_rx) { + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1); + break; + case ANTENNA_A: + rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0); + break; + case ANTENNA_B: + rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); + break; + } + + /* + * RT2525E and RT5222 need to flip TX I/Q + */ + if (rt2x00_rf(&rt2x00dev->chip, RF2525E) || + rt2x00_rf(&rt2x00dev->chip, RF5222)) { + rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1); + rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1); + rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1); + + /* + * RT2525E does not need RX I/Q Flip. + */ + if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) + rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0); + } else { + rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0); + rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0); + } + + rt2500usb_bbp_write(rt2x00dev, 2, r2); + rt2500usb_bbp_write(rt2x00dev, 14, r14); + rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5); + rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6); +} + +static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev, + const int short_slot_time, + const int beacon_int) +{ + u16 reg; + + rt2500usb_register_write(rt2x00dev, MAC_CSR10, + short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME); + + rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); + rt2x00_set_field16(®, TXRX_CSR18_INTERVAL, beacon_int * 4); + rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg); +} + +static void rt2500usb_config(struct rt2x00_dev *rt2x00dev, + const unsigned int flags, + struct ieee80211_conf *conf) +{ + int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME; + + if (flags & CONFIG_UPDATE_PHYMODE) + rt2500usb_config_phymode(rt2x00dev, conf->phymode); + if (flags & CONFIG_UPDATE_CHANNEL) + rt2500usb_config_channel(rt2x00dev, conf->channel_val, + conf->channel, conf->power_level); + if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) + rt2500usb_config_txpower(rt2x00dev, conf->power_level); + if (flags & CONFIG_UPDATE_ANTENNA) + rt2500usb_config_antenna(rt2x00dev, conf->antenna_sel_tx, + conf->antenna_sel_rx); + if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) + rt2500usb_config_duration(rt2x00dev, short_slot_time, + conf->beacon_int); +} + +/* + * LED functions. + */ +static void rt2500usb_enable_led(struct rt2x00_dev *rt2x00dev) +{ + u16 reg; + + rt2500usb_register_read(rt2x00dev, MAC_CSR21, ®); + rt2x00_set_field16(®, MAC_CSR21_ON_PERIOD, 70); + rt2x00_set_field16(®, MAC_CSR21_OFF_PERIOD, 30); + rt2500usb_register_write(rt2x00dev, MAC_CSR21, reg); + + rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®); + + if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) { + rt2x00_set_field16(®, MAC_CSR20_LINK, 1); + rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 0); + } else if (rt2x00dev->led_mode == LED_MODE_ASUS) { + rt2x00_set_field16(®, MAC_CSR20_LINK, 0); + rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 1); + } else { + rt2x00_set_field16(®, MAC_CSR20_LINK, 1); + rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 1); + } + + rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg); +} + +static void rt2500usb_disable_led(struct rt2x00_dev *rt2x00dev) +{ + u16 reg; + + rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®); + rt2x00_set_field16(®, MAC_CSR20_LINK, 0); + rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 0); + rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg); +} + +/* + * Link tuning + */ +static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev) +{ + u16 reg; + + /* + * Update FCS error count from register. + */ + rt2500usb_register_read(rt2x00dev, STA_CSR0, ®); + rt2x00dev->link.rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR); + + /* + * Update False CCA count from register. + */ + rt2500usb_register_read(rt2x00dev, STA_CSR3, ®); + rt2x00dev->link.false_cca = + rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR); +} + +static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev) +{ + u16 eeprom; + u16 value; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom); + value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW); + rt2500usb_bbp_write(rt2x00dev, 24, value); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom); + value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW); + rt2500usb_bbp_write(rt2x00dev, 25, value); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom); + value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW); + rt2500usb_bbp_write(rt2x00dev, 61, value); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom); + value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER); + rt2500usb_bbp_write(rt2x00dev, 17, value); + + rt2x00dev->link.vgc_level = value; +} + +static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); + u16 bbp_thresh; + u16 vgc_bound; + u16 sens; + u16 r24; + u16 r25; + u16 r61; + u16 r17_sens; + u8 r17; + u8 up_bound; + u8 low_bound; + + /* + * Determine the BBP tuning threshold and correctly + * set BBP 24, 25 and 61. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh); + bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24); + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25); + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61); + + if ((rssi + bbp_thresh) > 0) { + r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH); + r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH); + r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH); + } else { + r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW); + r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW); + r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW); + } + + rt2500usb_bbp_write(rt2x00dev, 24, r24); + rt2500usb_bbp_write(rt2x00dev, 25, r25); + rt2500usb_bbp_write(rt2x00dev, 61, r61); + + /* + * Read current r17 value, as well as the sensitivity values + * for the r17 register. + */ + rt2500usb_bbp_read(rt2x00dev, 17, &r17); + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens); + + /* + * A too low RSSI will cause too much false CCA which will + * then corrupt the R17 tuning. To remidy this the tuning should + * be stopped (While making sure the R17 value will not exceed limits) + */ + if (rssi >= -40) { + if (r17 != 0x60) + rt2500usb_bbp_write(rt2x00dev, 17, 0x60); + return; + } + + /* + * Special big-R17 for short distance + */ + if (rssi >= -58) { + sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW); + if (r17 != sens) + rt2500usb_bbp_write(rt2x00dev, 17, sens); + return; + } + + /* + * Special mid-R17 for middle distance + */ + if (rssi >= -74) { + sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH); + if (r17 != sens) + rt2500usb_bbp_write(rt2x00dev, 17, sens); + return; + } + + /* + * Leave short or middle distance condition, restore r17 + * to the dynamic tuning range. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound); + vgc_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER); + + low_bound = 0x32; + if (rssi >= -77) + up_bound = vgc_bound; + else + up_bound = vgc_bound - (-77 - rssi); + + if (up_bound < low_bound) + up_bound = low_bound; + + if (r17 > up_bound) { + rt2500usb_bbp_write(rt2x00dev, 17, up_bound); + rt2x00dev->link.vgc_level = up_bound; + } else if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) { + rt2500usb_bbp_write(rt2x00dev, 17, ++r17); + rt2x00dev->link.vgc_level = r17; + } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) { + rt2500usb_bbp_write(rt2x00dev, 17, --r17); + rt2x00dev->link.vgc_level = r17; + } +} + +/* + * Initialization functions. + */ +static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev) +{ + u16 reg; + + rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001, + USB_MODE_TEST, REGISTER_TIMEOUT); + rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308, + 0x00f0, REGISTER_TIMEOUT); + + rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); + rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX, 1); + rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); + + rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111); + rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11); + + rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 1); + rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 1); + rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 0); + rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg); + + rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 0); + rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 0); + rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 0); + rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg); + + rt2500usb_register_read(rt2x00dev, TXRX_CSR5, ®); + rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0, 13); + rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0_VALID, 1); + rt2x00_set_field16(®, TXRX_CSR5_BBP_ID1, 12); + rt2x00_set_field16(®, TXRX_CSR5_BBP_ID1_VALID, 1); + rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg); + + rt2500usb_register_read(rt2x00dev, TXRX_CSR6, ®); + rt2x00_set_field16(®, TXRX_CSR6_BBP_ID0, 10); + rt2x00_set_field16(®, TXRX_CSR6_BBP_ID0_VALID, 1); + rt2x00_set_field16(®, TXRX_CSR6_BBP_ID1, 11); + rt2x00_set_field16(®, TXRX_CSR6_BBP_ID1_VALID, 1); + rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg); + + rt2500usb_register_read(rt2x00dev, TXRX_CSR7, ®); + rt2x00_set_field16(®, TXRX_CSR7_BBP_ID0, 7); + rt2x00_set_field16(®, TXRX_CSR7_BBP_ID0_VALID, 1); + rt2x00_set_field16(®, TXRX_CSR7_BBP_ID1, 6); + rt2x00_set_field16(®, TXRX_CSR7_BBP_ID1_VALID, 1); + rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg); + + rt2500usb_register_read(rt2x00dev, TXRX_CSR8, ®); + rt2x00_set_field16(®, TXRX_CSR8_BBP_ID0, 5); + rt2x00_set_field16(®, TXRX_CSR8_BBP_ID0_VALID, 1); + rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1, 0); + rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1_VALID, 0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg); + + rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f); + rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d); + + if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) + return -EBUSY; + + rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 0); + rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 0); + rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 1); + rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg); + + if (rt2x00_get_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) { + rt2500usb_register_read(rt2x00dev, PHY_CSR2, ®); + reg &= ~0x0002; + } else { + reg = 0x3002; + } + rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg); + + rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002); + rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053); + rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee); + rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000); + + rt2500usb_register_read(rt2x00dev, MAC_CSR8, ®); + rt2x00_set_field16(®, MAC_CSR8_MAX_FRAME_UNIT, + rt2x00dev->rx->data_size); + rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg); + + rt2500usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field16(®, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER); + rt2x00_set_field16(®, TXRX_CSR0_KEY_ID, 0xff); + rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg); + + rt2500usb_register_read(rt2x00dev, MAC_CSR18, ®); + rt2x00_set_field16(®, MAC_CSR18_DELAY_AFTER_BEACON, 90); + rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg); + + rt2500usb_register_read(rt2x00dev, PHY_CSR4, ®); + rt2x00_set_field16(®, PHY_CSR4_LOW_RF_LE, 1); + rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg); + + rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®); + rt2x00_set_field16(®, TXRX_CSR1_AUTO_SEQUENCE, 1); + rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg); + + return 0; +} + +static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 value; + u8 reg_id; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2500usb_bbp_read(rt2x00dev, 0, &value); + if ((value != 0xff) && (value != 0x00)) + goto continue_csr_init; + NOTICE(rt2x00dev, "Waiting for BBP register.\n"); + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); + return -EACCES; + +continue_csr_init: + rt2500usb_bbp_write(rt2x00dev, 3, 0x02); + rt2500usb_bbp_write(rt2x00dev, 4, 0x19); + rt2500usb_bbp_write(rt2x00dev, 14, 0x1c); + rt2500usb_bbp_write(rt2x00dev, 15, 0x30); + rt2500usb_bbp_write(rt2x00dev, 16, 0xac); + rt2500usb_bbp_write(rt2x00dev, 18, 0x18); + rt2500usb_bbp_write(rt2x00dev, 19, 0xff); + rt2500usb_bbp_write(rt2x00dev, 20, 0x1e); + rt2500usb_bbp_write(rt2x00dev, 21, 0x08); + rt2500usb_bbp_write(rt2x00dev, 22, 0x08); + rt2500usb_bbp_write(rt2x00dev, 23, 0x08); + rt2500usb_bbp_write(rt2x00dev, 24, 0x80); + rt2500usb_bbp_write(rt2x00dev, 25, 0x50); + rt2500usb_bbp_write(rt2x00dev, 26, 0x08); + rt2500usb_bbp_write(rt2x00dev, 27, 0x23); + rt2500usb_bbp_write(rt2x00dev, 30, 0x10); + rt2500usb_bbp_write(rt2x00dev, 31, 0x2b); + rt2500usb_bbp_write(rt2x00dev, 32, 0xb9); + rt2500usb_bbp_write(rt2x00dev, 34, 0x12); + rt2500usb_bbp_write(rt2x00dev, 35, 0x50); + rt2500usb_bbp_write(rt2x00dev, 39, 0xc4); + rt2500usb_bbp_write(rt2x00dev, 40, 0x02); + rt2500usb_bbp_write(rt2x00dev, 41, 0x60); + rt2500usb_bbp_write(rt2x00dev, 53, 0x10); + rt2500usb_bbp_write(rt2x00dev, 54, 0x18); + rt2500usb_bbp_write(rt2x00dev, 56, 0x08); + rt2500usb_bbp_write(rt2x00dev, 57, 0x10); + rt2500usb_bbp_write(rt2x00dev, 58, 0x08); + rt2500usb_bbp_write(rt2x00dev, 61, 0x60); + rt2500usb_bbp_write(rt2x00dev, 62, 0x10); + rt2500usb_bbp_write(rt2x00dev, 75, 0xff); + + DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); + + if (eeprom != 0xffff && eeprom != 0x0000) { + reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); + value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); + DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", + reg_id, value); + rt2500usb_bbp_write(rt2x00dev, reg_id, value); + } + } + DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); + + return 0; +} + +/* + * Device state switch handlers. + */ +static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + u16 reg; + + rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); + rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX, + state == STATE_RADIO_RX_OFF); + rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); +} + +static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + /* + * Initialize all registers. + */ + if (rt2500usb_init_registers(rt2x00dev) || + rt2500usb_init_bbp(rt2x00dev)) { + ERROR(rt2x00dev, "Register initialization failed.\n"); + return -EIO; + } + + rt2x00usb_enable_radio(rt2x00dev); + + /* + * Enable LED + */ + rt2500usb_enable_led(rt2x00dev); + + return 0; +} + +static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + /* + * Disable LED + */ + rt2500usb_disable_led(rt2x00dev); + + rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121); + rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121); + + /* + * Disable synchronisation. + */ + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); + + rt2x00usb_disable_radio(rt2x00dev); +} + +static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + u16 reg; + u16 reg2; + unsigned int i; + char put_to_sleep; + char bbp_state; + char rf_state; + + put_to_sleep = (state != STATE_AWAKE); + + reg = 0; + rt2x00_set_field16(®, MAC_CSR17_BBP_DESIRE_STATE, state); + rt2x00_set_field16(®, MAC_CSR17_RF_DESIRE_STATE, state); + rt2x00_set_field16(®, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep); + rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg); + rt2x00_set_field16(®, MAC_CSR17_SET_STATE, 1); + rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg); + + /* + * Device is not guaranteed to be in the requested state yet. + * We must wait until the register indicates that the + * device has entered the correct state. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2500usb_register_read(rt2x00dev, MAC_CSR17, ®2); + bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE); + rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE); + if (bbp_state == state && rf_state == state) + return 0; + rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg); + msleep(30); + } + + NOTICE(rt2x00dev, "Device failed to enter state %d, " + "current device state: bbp %d and rf %d.\n", + state, bbp_state, rf_state); + + return -EBUSY; +} + +static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int retval = 0; + + switch (state) { + case STATE_RADIO_ON: + retval = rt2500usb_enable_radio(rt2x00dev); + break; + case STATE_RADIO_OFF: + rt2500usb_disable_radio(rt2x00dev); + break; + case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_OFF: + rt2500usb_toggle_rx(rt2x00dev, state); + break; + case STATE_DEEP_SLEEP: + case STATE_SLEEP: + case STATE_STANDBY: + case STATE_AWAKE: + retval = rt2500usb_set_state(rt2x00dev, state); + break; + default: + retval = -ENOTSUPP; + break; + } + + return retval; +} + +/* + * TX descriptor initialization + */ +static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, + struct data_desc *txd, + struct data_entry_desc *desc, + struct ieee80211_hdr *ieee80211hdr, + unsigned int length, + struct ieee80211_tx_control *control) +{ + u32 word; + + /* + * Start writing the descriptor words. + */ + rt2x00_desc_read(txd, 1, &word); + rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(&word, TXD_W1_AIFS, desc->aifs); + rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min); + rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max); + rt2x00_desc_write(txd, 1, word); + + rt2x00_desc_read(txd, 2, &word); + rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal); + rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high); + rt2x00_desc_write(txd, 2, word); + + rt2x00_desc_read(txd, 0, &word); + rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, control->retry_limit); + rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, + test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_ACK, + !(control->flags & IEEE80211_TXCTL_NO_ACK)); + rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_OFDM, + test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_NEW_SEQ, + !!(control->flags & IEEE80211_TXCTL_FIRST_FRAGMENT)); + rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length); + rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE); + rt2x00_desc_write(txd, 0, word); +} + +/* + * TX data initialization + */ +static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, + unsigned int queue) +{ + u16 reg; + + if (queue != IEEE80211_TX_QUEUE_BEACON) + return; + + rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); + if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) { + rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1); + /* + * Beacon generation will fail initially. + * To prevent this we need to register the TXRX_CSR19 + * register several times. + */ + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); + } +} + +/* + * RX control handlers + */ +static int rt2500usb_fill_rxdone(struct data_entry *entry, + int *signal, int *rssi, int *ofdm, int *size) +{ + struct urb *urb = entry->priv; + struct data_desc *rxd = (struct data_desc *)(entry->skb->data + + (urb->actual_length - + entry->ring->desc_size)); + u32 word0; + u32 word1; + + rt2x00_desc_read(rxd, 0, &word0); + rt2x00_desc_read(rxd, 1, &word1); + + if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) || + rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR) || + rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR)) + return -EINVAL; + + /* + * Obtain the status about this packet. + */ + *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); + *rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) - + entry->ring->rt2x00dev->rssi_offset; + *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); + *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); + + return 0; +} + +/* + * Interrupt functions. + */ +static void rt2500usb_beacondone(struct urb *urb) +{ + struct data_entry *entry = (struct data_entry *)urb->context; + struct data_ring *ring = entry->ring; + + if (!test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) + return; + + /* + * Check if this was the guardian beacon, + * if that was the case we need to send the real beacon now. + * Otherwise we should free the sk_buffer, the device + * should be doing the rest of the work now. + */ + if (ring->index == 1) { + rt2x00_ring_index_done_inc(ring); + entry = rt2x00_get_data_entry(ring); + usb_submit_urb(entry->priv, GFP_ATOMIC); + rt2x00_ring_index_inc(ring); + } else if (ring->index_done == 1) { + entry = rt2x00_get_data_entry_done(ring); + if (entry->skb) { + dev_kfree_skb(entry->skb); + entry->skb = NULL; + } + rt2x00_ring_index_done_inc(ring); + } +} + +/* + * Device probe functions. + */ +static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u16 word; + u8 *mac; + + rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); + + /* + * Start validation of the data that has been read. + */ + mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); + if (!is_valid_ether_addr(mac)) { + random_ether_addr(mac); + EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac)); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); + rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522); + rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); + EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); + rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); + EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI, + DEFAULT_RSSI_OFFSET); + rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word); + EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45); + rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word); + EEPROM(rt2x00dev, "BBPtune: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40); + rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); + EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48); + rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41); + rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word); + EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40); + rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80); + rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word); + EEPROM(rt2x00dev, "BBPtune r24: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40); + rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50); + rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word); + EEPROM(rt2x00dev, "BBPtune r25: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60); + rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d); + rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word); + EEPROM(rt2x00dev, "BBPtune r61: 0x%04x\n", word); + } + + return 0; +} + +static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u16 reg; + u16 value; + u16 eeprom; + + /* + * Read EEPROM word for configuration. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + + /* + * Identify RF chipset. + */ + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®); + rt2x00_set_chip(rt2x00dev, RT2570, value, reg); + + if (rt2x00_rev(&rt2x00dev->chip, 0xffff0)) { + ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); + return -ENODEV; + } + + if (!rt2x00_rf(&rt2x00dev->chip, RF2522) && + !rt2x00_rf(&rt2x00dev->chip, RF2523) && + !rt2x00_rf(&rt2x00dev->chip, RF2524) && + !rt2x00_rf(&rt2x00dev->chip, RF2525) && + !rt2x00_rf(&rt2x00dev->chip, RF2525E) && + !rt2x00_rf(&rt2x00dev->chip, RF5222)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } + + /* + * Identify default antenna configuration. + */ + rt2x00dev->hw->conf.antenna_sel_tx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); + rt2x00dev->hw->conf.antenna_sel_rx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); + + /* + * Store led mode, for correct led behaviour. + */ + rt2x00dev->led_mode = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); + + /* + * Check if the BBP tuning should be disabled. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE)) + __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); + + /* + * Read the RSSI <-> dBm offset information. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom); + rt2x00dev->rssi_offset = + rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI); + + return 0; +} + +/* + * RF value list for RF2522 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_bg_2522[] = { + { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 }, + { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 }, + { 3, 0x00002050, 0x000c2002, 0x00000101, 0 }, + { 4, 0x00002050, 0x000c2016, 0x00000101, 0 }, + { 5, 0x00002050, 0x000c202a, 0x00000101, 0 }, + { 6, 0x00002050, 0x000c203e, 0x00000101, 0 }, + { 7, 0x00002050, 0x000c2052, 0x00000101, 0 }, + { 8, 0x00002050, 0x000c2066, 0x00000101, 0 }, + { 9, 0x00002050, 0x000c207a, 0x00000101, 0 }, + { 10, 0x00002050, 0x000c208e, 0x00000101, 0 }, + { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 }, + { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 }, + { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 }, + { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 }, +}; + +/* + * RF value list for RF2523 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_bg_2523[] = { + { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b }, + { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b }, + { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b }, + { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b }, + { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b }, + { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b }, + { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b }, + { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b }, + { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b }, + { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b }, + { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b }, + { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b }, + { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b }, + { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 }, +}; + +/* + * RF value list for RF2524 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_bg_2524[] = { + { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b }, + { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b }, + { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b }, + { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b }, + { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b }, + { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b }, + { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b }, + { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b }, + { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b }, + { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b }, + { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b }, + { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b }, + { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b }, + { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 }, +}; + +/* + * RF value list for RF2525 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_bg_2525[] = { + { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b }, + { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b }, + { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b }, + { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b }, + { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b }, + { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b }, + { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b }, + { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b }, + { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b }, + { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b }, + { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b }, + { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b }, + { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b }, + { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 }, +}; + +/* + * RF value list for RF2525e + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_bg_2525e[] = { + { 1, 0x00022010, 0x0000089a, 0x00060111, 0x00000e1b }, + { 2, 0x00022010, 0x0000089e, 0x00060111, 0x00000e07 }, + { 3, 0x00022010, 0x0000089e, 0x00060111, 0x00000e1b }, + { 4, 0x00022010, 0x000008a2, 0x00060111, 0x00000e07 }, + { 5, 0x00022010, 0x000008a2, 0x00060111, 0x00000e1b }, + { 6, 0x00022010, 0x000008a6, 0x00060111, 0x00000e07 }, + { 7, 0x00022010, 0x000008a6, 0x00060111, 0x00000e1b }, + { 8, 0x00022010, 0x000008aa, 0x00060111, 0x00000e07 }, + { 9, 0x00022010, 0x000008aa, 0x00060111, 0x00000e1b }, + { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 }, + { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b }, + { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 }, + { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b }, + { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 }, +}; + +/* + * RF value list for RF5222 + * Supports: 2.4 GHz & 5.2 GHz + */ +static const struct rf_channel rf_vals_5222[] = { + { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b }, + { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b }, + { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b }, + { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b }, + { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b }, + { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b }, + { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b }, + { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b }, + { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b }, + { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b }, + { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b }, + { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b }, + { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b }, + { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b }, + + /* 802.11 UNI / HyperLan 2 */ + { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f }, + { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f }, + { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f }, + { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f }, + { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f }, + { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f }, + { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f }, + { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f }, + + /* 802.11 HyperLan 2 */ + { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f }, + { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f }, + { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f }, + { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f }, + { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f }, + { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f }, + { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f }, + { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f }, + { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f }, + { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f }, + + /* 802.11 UNII */ + { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f }, + { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 }, + { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 }, + { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 }, + { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 }, +}; + +static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +{ + struct hw_mode_spec *spec = &rt2x00dev->spec; + u8 *txpower; + unsigned int i; + + /* + * Initialize all hw fields. + */ + rt2x00dev->hw->flags = + IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | + IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_MONITOR_DURING_OPER | + IEEE80211_HW_NO_PROBE_FILTERING; + rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; + rt2x00dev->hw->max_signal = MAX_SIGNAL; + rt2x00dev->hw->max_rssi = MAX_RX_SSI; + rt2x00dev->hw->queues = 2; + + SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev); + SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, + rt2x00_eeprom_addr(rt2x00dev, + EEPROM_MAC_ADDR_0)); + + /* + * Convert tx_power array in eeprom. + */ + txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); + for (i = 0; i < 14; i++) + txpower[i] = TXPOWER_FROM_DEV(txpower[i]); + + /* + * Initialize hw_mode information. + */ + spec->num_modes = 2; + spec->num_rates = 12; + spec->tx_power_a = NULL; + spec->tx_power_bg = txpower; + spec->tx_power_default = DEFAULT_TXPOWER; + + if (rt2x00_rf(&rt2x00dev->chip, RF2522)) { + spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); + spec->channels = rf_vals_bg_2522; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) { + spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523); + spec->channels = rf_vals_bg_2523; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) { + spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524); + spec->channels = rf_vals_bg_2524; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) { + spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525); + spec->channels = rf_vals_bg_2525; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) { + spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e); + spec->channels = rf_vals_bg_2525e; + } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) { + spec->num_channels = ARRAY_SIZE(rf_vals_5222); + spec->channels = rf_vals_5222; + spec->num_modes = 3; + } +} + +static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + int retval; + + /* + * Allocate eeprom data. + */ + retval = rt2500usb_validate_eeprom(rt2x00dev); + if (retval) + return retval; + + retval = rt2500usb_init_eeprom(rt2x00dev); + if (retval) + return retval; + + /* + * Initialize hw specifications. + */ + rt2500usb_probe_hw_mode(rt2x00dev); + + /* + * USB devices require scheduled packet filter toggling + *This device requires the beacon ring + */ + __set_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags); + __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags); + + /* + * Set the rssi offset. + */ + rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + + return 0; +} + +/* + * IEEE80211 stack callback functions. + */ +static int rt2500usb_beacon_update(struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ieee80211_tx_control *control) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct usb_device *usb_dev = + interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); + struct data_ring *ring = + rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + struct data_entry *beacon; + struct data_entry *guardian; + int length; + + /* + * Just in case the ieee80211 doesn't set this, + * but we need this queue set for the descriptor + * initialization. + */ + control->queue = IEEE80211_TX_QUEUE_BEACON; + + /* + * Obtain 2 entries, one for the guardian byte, + * the second for the actual beacon. + */ + guardian = rt2x00_get_data_entry(ring); + rt2x00_ring_index_inc(ring); + beacon = rt2x00_get_data_entry(ring); + + /* + * First we create the beacon. + */ + skb_push(skb, ring->desc_size); + rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data, + (struct ieee80211_hdr *)(skb->data + + ring->desc_size), + skb->len - ring->desc_size, control); + + /* + * Length passed to usb_fill_urb cannot be an odd number, + * so add 1 byte to make it even. + */ + length = skb->len; + if (length % 2) + length++; + + usb_fill_bulk_urb(beacon->priv, usb_dev, + usb_sndbulkpipe(usb_dev, 1), + skb->data, length, rt2500usb_beacondone, beacon); + + beacon->skb = skb; + + /* + * Second we need to create the guardian byte. + * We only need a single byte, so lets recycle + * the 'flags' field we are not using for beacons. + */ + guardian->flags = 0; + usb_fill_bulk_urb(guardian->priv, usb_dev, + usb_sndbulkpipe(usb_dev, 1), + &guardian->flags, 1, rt2500usb_beacondone, guardian); + + /* + * Send out the guardian byte. + */ + usb_submit_urb(guardian->priv, GFP_ATOMIC); + + /* + * Enable beacon generation. + */ + rt2500usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + + return 0; +} + +static const struct ieee80211_ops rt2500usb_mac80211_ops = { + .tx = rt2x00mac_tx, + .add_interface = rt2x00mac_add_interface, + .remove_interface = rt2x00mac_remove_interface, + .config = rt2x00mac_config, + .config_interface = rt2x00mac_config_interface, + .set_multicast_list = rt2x00mac_set_multicast_list, + .get_stats = rt2x00mac_get_stats, + .conf_tx = rt2x00mac_conf_tx, + .get_tx_stats = rt2x00mac_get_tx_stats, + .beacon_update = rt2500usb_beacon_update, +}; + +static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { + .probe_hw = rt2500usb_probe_hw, + .initialize = rt2x00usb_initialize, + .uninitialize = rt2x00usb_uninitialize, + .set_device_state = rt2500usb_set_device_state, + .link_stats = rt2500usb_link_stats, + .reset_tuner = rt2500usb_reset_tuner, + .link_tuner = rt2500usb_link_tuner, + .write_tx_desc = rt2500usb_write_tx_desc, + .write_tx_data = rt2x00usb_write_tx_data, + .kick_tx_queue = rt2500usb_kick_tx_queue, + .fill_rxdone = rt2500usb_fill_rxdone, + .config_mac_addr = rt2500usb_config_mac_addr, + .config_bssid = rt2500usb_config_bssid, + .config_packet_filter = rt2500usb_config_packet_filter, + .config_type = rt2500usb_config_type, + .config = rt2500usb_config, +}; + +static const struct rt2x00_ops rt2500usb_ops = { + .name = DRV_NAME, + .rxd_size = RXD_DESC_SIZE, + .txd_size = TXD_DESC_SIZE, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .lib = &rt2500usb_rt2x00_ops, + .hw = &rt2500usb_mac80211_ops, +#ifdef CONFIG_RT2X00_LIB_DEBUGFS + .debugfs = &rt2500usb_rt2x00debug, +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ +}; + +/* + * rt2500usb module information. + */ +static struct usb_device_id rt2500usb_device_table[] = { + /* ASUS */ + { USB_DEVICE(0x0b05, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x0b05, 0x1707), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* Belkin */ + { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* Cisco Systems */ + { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* Conceptronic */ + { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* D-LINK */ + { USB_DEVICE(0x2001, 0x3c00), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* Gigabyte */ + { USB_DEVICE(0x1044, 0x8001), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x1044, 0x8007), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* Hercules */ + { USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* Melco */ + { USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) }, + + /* MSI */ + { USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x0db0, 0x6869), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* Ralink */ + { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) }, + { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* Siemens */ + { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* SMC */ + { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* Spairon */ + { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* Trust */ + { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* Zinwell */ + { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) }, + { 0, } +}; + +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver."); +MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards"); +MODULE_DEVICE_TABLE(usb, rt2500usb_device_table); +MODULE_LICENSE("GPL"); + +static struct usb_driver rt2500usb_driver = { + .name = DRV_NAME, + .id_table = rt2500usb_device_table, + .probe = rt2x00usb_probe, + .disconnect = rt2x00usb_disconnect, + .suspend = rt2x00usb_suspend, + .resume = rt2x00usb_resume, +}; + +static int __init rt2500usb_init(void) +{ + return usb_register(&rt2500usb_driver); +} + +static void __exit rt2500usb_exit(void) +{ + usb_deregister(&rt2500usb_driver); +} + +module_init(rt2500usb_init); +module_exit(rt2500usb_exit); diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h new file mode 100644 index 000000000000..b18d56e73cf1 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -0,0 +1,798 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2500usb + Abstract: Data structures and registers for the rt2500usb module. + Supported chipsets: RT2570. + */ + +#ifndef RT2500USB_H +#define RT2500USB_H + +/* + * RF chip defines. + */ +#define RF2522 0x0000 +#define RF2523 0x0001 +#define RF2524 0x0002 +#define RF2525 0x0003 +#define RF2525E 0x0005 +#define RF5222 0x0010 + +/* + * RT2570 version + */ +#define RT2570_VERSION_B 2 +#define RT2570_VERSION_C 3 +#define RT2570_VERSION_D 4 + +/* + * Signal information. + * Defaul offset is required for RSSI <-> dBm conversion. + */ +#define MAX_SIGNAL 100 +#define MAX_RX_SSI -1 +#define DEFAULT_RSSI_OFFSET 120 + +/* + * Register layout information. + */ +#define CSR_REG_BASE 0x0400 +#define CSR_REG_SIZE 0x0100 +#define EEPROM_BASE 0x0000 +#define EEPROM_SIZE 0x006a +#define BBP_SIZE 0x0060 +#define RF_SIZE 0x0014 + +/* + * Control/Status Registers(CSR). + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * MAC_CSR0: ASIC revision number. + */ +#define MAC_CSR0 0x0400 + +/* + * MAC_CSR1: System control. + * SOFT_RESET: Software reset, 1: reset, 0: normal. + * BBP_RESET: Hardware reset, 1: reset, 0, release. + * HOST_READY: Host ready after initialization. + */ +#define MAC_CSR1 0x0402 +#define MAC_CSR1_SOFT_RESET FIELD16(0x00000001) +#define MAC_CSR1_BBP_RESET FIELD16(0x00000002) +#define MAC_CSR1_HOST_READY FIELD16(0x00000004) + +/* + * MAC_CSR2: STA MAC register 0. + */ +#define MAC_CSR2 0x0404 +#define MAC_CSR2_BYTE0 FIELD16(0x00ff) +#define MAC_CSR2_BYTE1 FIELD16(0xff00) + +/* + * MAC_CSR3: STA MAC register 1. + */ +#define MAC_CSR3 0x0406 +#define MAC_CSR3_BYTE2 FIELD16(0x00ff) +#define MAC_CSR3_BYTE3 FIELD16(0xff00) + +/* + * MAC_CSR4: STA MAC register 2. + */ +#define MAC_CSR4 0X0408 +#define MAC_CSR4_BYTE4 FIELD16(0x00ff) +#define MAC_CSR4_BYTE5 FIELD16(0xff00) + +/* + * MAC_CSR5: BSSID register 0. + */ +#define MAC_CSR5 0x040a +#define MAC_CSR5_BYTE0 FIELD16(0x00ff) +#define MAC_CSR5_BYTE1 FIELD16(0xff00) + +/* + * MAC_CSR6: BSSID register 1. + */ +#define MAC_CSR6 0x040c +#define MAC_CSR6_BYTE2 FIELD16(0x00ff) +#define MAC_CSR6_BYTE3 FIELD16(0xff00) + +/* + * MAC_CSR7: BSSID register 2. + */ +#define MAC_CSR7 0x040e +#define MAC_CSR7_BYTE4 FIELD16(0x00ff) +#define MAC_CSR7_BYTE5 FIELD16(0xff00) + +/* + * MAC_CSR8: Max frame length. + */ +#define MAC_CSR8 0x0410 +#define MAC_CSR8_MAX_FRAME_UNIT FIELD16(0x0fff) + +/* + * Misc MAC_CSR registers. + * MAC_CSR9: Timer control. + * MAC_CSR10: Slot time. + * MAC_CSR11: IFS. + * MAC_CSR12: EIFS. + * MAC_CSR13: Power mode0. + * MAC_CSR14: Power mode1. + * MAC_CSR15: Power saving transition0 + * MAC_CSR16: Power saving transition1 + */ +#define MAC_CSR9 0x0412 +#define MAC_CSR10 0x0414 +#define MAC_CSR11 0x0416 +#define MAC_CSR12 0x0418 +#define MAC_CSR13 0x041a +#define MAC_CSR14 0x041c +#define MAC_CSR15 0x041e +#define MAC_CSR16 0x0420 + +/* + * MAC_CSR17: Manual power control / status register. + * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake. + * SET_STATE: Set state. Write 1 to trigger, self cleared. + * BBP_DESIRE_STATE: BBP desired state. + * RF_DESIRE_STATE: RF desired state. + * BBP_CURRENT_STATE: BBP current state. + * RF_CURRENT_STATE: RF current state. + * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared. + */ +#define MAC_CSR17 0x0422 +#define MAC_CSR17_SET_STATE FIELD16(0x0001) +#define MAC_CSR17_BBP_DESIRE_STATE FIELD16(0x0006) +#define MAC_CSR17_RF_DESIRE_STATE FIELD16(0x0018) +#define MAC_CSR17_BBP_CURR_STATE FIELD16(0x0060) +#define MAC_CSR17_RF_CURR_STATE FIELD16(0x0180) +#define MAC_CSR17_PUT_TO_SLEEP FIELD16(0x0200) + +/* + * MAC_CSR18: Wakeup timer register. + * DELAY_AFTER_BEACON: Delay after Tbcn expired in units of 1/16 TU. + * BEACONS_BEFORE_WAKEUP: Number of beacon before wakeup. + * AUTO_WAKE: Enable auto wakeup / sleep mechanism. + */ +#define MAC_CSR18 0x0424 +#define MAC_CSR18_DELAY_AFTER_BEACON FIELD16(0x00ff) +#define MAC_CSR18_BEACONS_BEFORE_WAKEUP FIELD16(0x7f00) +#define MAC_CSR18_AUTO_WAKE FIELD16(0x8000) + +/* + * MAC_CSR19: GPIO control register. + */ +#define MAC_CSR19 0x0426 + +/* + * MAC_CSR20: LED control register. + * ACTIVITY: 0: idle, 1: active. + * LINK: 0: linkoff, 1: linkup. + * ACTIVITY_POLARITY: 0: active low, 1: active high. + */ +#define MAC_CSR20 0x0428 +#define MAC_CSR20_ACTIVITY FIELD16(0x0001) +#define MAC_CSR20_LINK FIELD16(0x0002) +#define MAC_CSR20_ACTIVITY_POLARITY FIELD16(0x0004) + +/* + * MAC_CSR21: LED control register. + * ON_PERIOD: On period, default 70ms. + * OFF_PERIOD: Off period, default 30ms. + */ +#define MAC_CSR21 0x042a +#define MAC_CSR21_ON_PERIOD FIELD16(0x00ff) +#define MAC_CSR21_OFF_PERIOD FIELD16(0xff00) + +/* + * Collision window control register. + */ +#define MAC_CSR22 0x042c + +/* + * Transmit related CSRs. + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * TXRX_CSR0: Security control register. + */ +#define TXRX_CSR0 0x0440 +#define TXRX_CSR0_ALGORITHM FIELD16(0x0007) +#define TXRX_CSR0_IV_OFFSET FIELD16(0x01f8) +#define TXRX_CSR0_KEY_ID FIELD16(0x1e00) + +/* + * TXRX_CSR1: TX configuration. + * ACK_TIMEOUT: ACK Timeout in unit of 1-us. + * TSF_OFFSET: TSF offset in MAC header. + * AUTO_SEQUENCE: Let ASIC control frame sequence number. + */ +#define TXRX_CSR1 0x0442 +#define TXRX_CSR1_ACK_TIMEOUT FIELD16(0x00ff) +#define TXRX_CSR1_TSF_OFFSET FIELD16(0x7f00) +#define TXRX_CSR1_AUTO_SEQUENCE FIELD16(0x8000) + +/* + * TXRX_CSR2: RX control. + * DISABLE_RX: Disable rx engine. + * DROP_CRC: Drop crc error. + * DROP_PHYSICAL: Drop physical error. + * DROP_CONTROL: Drop control frame. + * DROP_NOT_TO_ME: Drop not to me unicast frame. + * DROP_TODS: Drop frame tods bit is true. + * DROP_VERSION_ERROR: Drop version error frame. + * DROP_MCAST: Drop multicast frames. + * DROP_BCAST: Drop broadcast frames. + */ +#define TXRX_CSR2 0x0444 +#define TXRX_CSR2_DISABLE_RX FIELD16(0x0001) +#define TXRX_CSR2_DROP_CRC FIELD16(0x0002) +#define TXRX_CSR2_DROP_PHYSICAL FIELD16(0x0004) +#define TXRX_CSR2_DROP_CONTROL FIELD16(0x0008) +#define TXRX_CSR2_DROP_NOT_TO_ME FIELD16(0x0010) +#define TXRX_CSR2_DROP_TODS FIELD16(0x0020) +#define TXRX_CSR2_DROP_VERSION_ERROR FIELD16(0x0040) +#define TXRX_CSR2_DROP_MULTICAST FIELD16(0x0200) +#define TXRX_CSR2_DROP_BROADCAST FIELD16(0x0400) + +/* + * RX BBP ID registers + * TXRX_CSR3: CCK RX BBP ID. + * TXRX_CSR4: OFDM RX BBP ID. + */ +#define TXRX_CSR3 0x0446 +#define TXRX_CSR4 0x0448 + +/* + * TXRX_CSR5: CCK TX BBP ID0. + */ +#define TXRX_CSR5 0x044a +#define TXRX_CSR5_BBP_ID0 FIELD16(0x007f) +#define TXRX_CSR5_BBP_ID0_VALID FIELD16(0x0080) +#define TXRX_CSR5_BBP_ID1 FIELD16(0x7f00) +#define TXRX_CSR5_BBP_ID1_VALID FIELD16(0x8000) + +/* + * TXRX_CSR6: CCK TX BBP ID1. + */ +#define TXRX_CSR6 0x044c +#define TXRX_CSR6_BBP_ID0 FIELD16(0x007f) +#define TXRX_CSR6_BBP_ID0_VALID FIELD16(0x0080) +#define TXRX_CSR6_BBP_ID1 FIELD16(0x7f00) +#define TXRX_CSR6_BBP_ID1_VALID FIELD16(0x8000) + +/* + * TXRX_CSR7: OFDM TX BBP ID0. + */ +#define TXRX_CSR7 0x044e +#define TXRX_CSR7_BBP_ID0 FIELD16(0x007f) +#define TXRX_CSR7_BBP_ID0_VALID FIELD16(0x0080) +#define TXRX_CSR7_BBP_ID1 FIELD16(0x7f00) +#define TXRX_CSR7_BBP_ID1_VALID FIELD16(0x8000) + +/* + * TXRX_CSR5: OFDM TX BBP ID1. + */ +#define TXRX_CSR8 0x0450 +#define TXRX_CSR8_BBP_ID0 FIELD16(0x007f) +#define TXRX_CSR8_BBP_ID0_VALID FIELD16(0x0080) +#define TXRX_CSR8_BBP_ID1 FIELD16(0x7f00) +#define TXRX_CSR8_BBP_ID1_VALID FIELD16(0x8000) + +/* + * TXRX_CSR9: TX ACK time-out. + */ +#define TXRX_CSR9 0x0452 + +/* + * TXRX_CSR10: Auto responder control. + */ +#define TXRX_CSR10 0x0454 +#define TXRX_CSR10_AUTORESPOND_PREAMBLE FIELD16(0x0004) + +/* + * TXRX_CSR11: Auto responder basic rate. + */ +#define TXRX_CSR11 0x0456 + +/* + * ACK/CTS time registers. + */ +#define TXRX_CSR12 0x0458 +#define TXRX_CSR13 0x045a +#define TXRX_CSR14 0x045c +#define TXRX_CSR15 0x045e +#define TXRX_CSR16 0x0460 +#define TXRX_CSR17 0x0462 + +/* + * TXRX_CSR18: Synchronization control register. + */ +#define TXRX_CSR18 0x0464 +#define TXRX_CSR18_OFFSET FIELD16(0x000f) +#define TXRX_CSR18_INTERVAL FIELD16(0xfff0) + +/* + * TXRX_CSR19: Synchronization control register. + * TSF_COUNT: Enable TSF auto counting. + * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. + * TBCN: Enable Tbcn with reload value. + * BEACON_GEN: Enable beacon generator. + */ +#define TXRX_CSR19 0x0466 +#define TXRX_CSR19_TSF_COUNT FIELD16(0x0001) +#define TXRX_CSR19_TSF_SYNC FIELD16(0x0006) +#define TXRX_CSR19_TBCN FIELD16(0x0008) +#define TXRX_CSR19_BEACON_GEN FIELD16(0x0010) + +/* + * TXRX_CSR20: Tx BEACON offset time control register. + * OFFSET: In units of usec. + * BCN_EXPECT_WINDOW: Default: 2^CWmin + */ +#define TXRX_CSR20 0x0468 +#define TXRX_CSR20_OFFSET FIELD16(0x1fff) +#define TXRX_CSR20_BCN_EXPECT_WINDOW FIELD16(0xe000) + +/* + * TXRX_CSR21 + */ +#define TXRX_CSR21 0x046a + +/* + * Encryption related CSRs. + * + */ + +/* + * SEC_CSR0-SEC_CSR7: Shared key 0, word 0-7 + */ +#define SEC_CSR0 0x0480 +#define SEC_CSR1 0x0482 +#define SEC_CSR2 0x0484 +#define SEC_CSR3 0x0486 +#define SEC_CSR4 0x0488 +#define SEC_CSR5 0x048a +#define SEC_CSR6 0x048c +#define SEC_CSR7 0x048e + +/* + * SEC_CSR8-SEC_CSR15: Shared key 1, word 0-7 + */ +#define SEC_CSR8 0x0490 +#define SEC_CSR9 0x0492 +#define SEC_CSR10 0x0494 +#define SEC_CSR11 0x0496 +#define SEC_CSR12 0x0498 +#define SEC_CSR13 0x049a +#define SEC_CSR14 0x049c +#define SEC_CSR15 0x049e + +/* + * SEC_CSR16-SEC_CSR23: Shared key 2, word 0-7 + */ +#define SEC_CSR16 0x04a0 +#define SEC_CSR17 0x04a2 +#define SEC_CSR18 0X04A4 +#define SEC_CSR19 0x04a6 +#define SEC_CSR20 0x04a8 +#define SEC_CSR21 0x04aa +#define SEC_CSR22 0x04ac +#define SEC_CSR23 0x04ae + +/* + * SEC_CSR24-SEC_CSR31: Shared key 3, word 0-7 + */ +#define SEC_CSR24 0x04b0 +#define SEC_CSR25 0x04b2 +#define SEC_CSR26 0x04b4 +#define SEC_CSR27 0x04b6 +#define SEC_CSR28 0x04b8 +#define SEC_CSR29 0x04ba +#define SEC_CSR30 0x04bc +#define SEC_CSR31 0x04be + +/* + * PHY control registers. + */ + +/* + * PHY_CSR0: RF switching timing control. + */ +#define PHY_CSR0 0x04c0 + +/* + * PHY_CSR1: TX PA configuration. + */ +#define PHY_CSR1 0x04c2 + +/* + * MAC configuration registers. + * PHY_CSR2: TX MAC configuration. + * PHY_CSR3: RX MAC configuration. + */ +#define PHY_CSR2 0x04c4 +#define PHY_CSR3 0x04c6 + +/* + * PHY_CSR4: Interface configuration. + */ +#define PHY_CSR4 0x04c8 +#define PHY_CSR4_LOW_RF_LE FIELD16(0x0001) + +/* + * BBP pre-TX registers. + * PHY_CSR5: BBP pre-TX CCK. + */ +#define PHY_CSR5 0x04ca +#define PHY_CSR5_CCK FIELD16(0x0003) +#define PHY_CSR5_CCK_FLIP FIELD16(0x0004) + +/* + * BBP pre-TX registers. + * PHY_CSR6: BBP pre-TX OFDM. + */ +#define PHY_CSR6 0x04cc +#define PHY_CSR6_OFDM FIELD16(0x0003) +#define PHY_CSR6_OFDM_FLIP FIELD16(0x0004) + +/* + * PHY_CSR7: BBP access register 0. + * BBP_DATA: BBP data. + * BBP_REG_ID: BBP register ID. + * BBP_READ_CONTROL: 0: write, 1: read. + */ +#define PHY_CSR7 0x04ce +#define PHY_CSR7_DATA FIELD16(0x00ff) +#define PHY_CSR7_REG_ID FIELD16(0x7f00) +#define PHY_CSR7_READ_CONTROL FIELD16(0x8000) + +/* + * PHY_CSR8: BBP access register 1. + * BBP_BUSY: ASIC is busy execute BBP programming. + */ +#define PHY_CSR8 0x04d0 +#define PHY_CSR8_BUSY FIELD16(0x0001) + +/* + * PHY_CSR9: RF access register. + * RF_VALUE: Register value + id to program into rf/if. + */ +#define PHY_CSR9 0x04d2 +#define PHY_CSR9_RF_VALUE FIELD16(0xffff) + +/* + * PHY_CSR10: RF access register. + * RF_VALUE: Register value + id to program into rf/if. + * RF_NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22). + * RF_IF_SELECT: Chip to program: 0: rf, 1: if. + * RF_PLL_LD: Rf pll_ld status. + * RF_BUSY: 1: asic is busy execute rf programming. + */ +#define PHY_CSR10 0x04d4 +#define PHY_CSR10_RF_VALUE FIELD16(0x00ff) +#define PHY_CSR10_RF_NUMBER_OF_BITS FIELD16(0x1f00) +#define PHY_CSR10_RF_IF_SELECT FIELD16(0x2000) +#define PHY_CSR10_RF_PLL_LD FIELD16(0x4000) +#define PHY_CSR10_RF_BUSY FIELD16(0x8000) + +/* + * STA_CSR0: FCS error count. + * FCS_ERROR: FCS error count, cleared when read. + */ +#define STA_CSR0 0x04e0 +#define STA_CSR0_FCS_ERROR FIELD16(0xffff) + +/* + * STA_CSR1: PLCP error count. + */ +#define STA_CSR1 0x04e2 + +/* + * STA_CSR2: LONG error count. + */ +#define STA_CSR2 0x04e4 + +/* + * STA_CSR3: CCA false alarm. + * FALSE_CCA_ERROR: False CCA error count, cleared when read. + */ +#define STA_CSR3 0x04e6 +#define STA_CSR3_FALSE_CCA_ERROR FIELD16(0xffff) + +/* + * STA_CSR4: RX FIFO overflow. + */ +#define STA_CSR4 0x04e8 + +/* + * STA_CSR5: Beacon sent counter. + */ +#define STA_CSR5 0x04ea + +/* + * Statistics registers + */ +#define STA_CSR6 0x04ec +#define STA_CSR7 0x04ee +#define STA_CSR8 0x04f0 +#define STA_CSR9 0x04f2 +#define STA_CSR10 0x04f4 + +/* + * BBP registers. + * The wordsize of the BBP is 8 bits. + */ + +/* + * R2: TX antenna control + */ +#define BBP_R2_TX_ANTENNA FIELD8(0x03) +#define BBP_R2_TX_IQ_FLIP FIELD8(0x04) + +/* + * R14: RX antenna control + */ +#define BBP_R14_RX_ANTENNA FIELD8(0x03) +#define BBP_R14_RX_IQ_FLIP FIELD8(0x04) + +/* + * RF registers. + */ + +/* + * RF 1 + */ +#define RF1_TUNER FIELD32(0x00020000) + +/* + * RF 3 + */ +#define RF3_TUNER FIELD32(0x00000100) +#define RF3_TXPOWER FIELD32(0x00003e00) + +/* + * EEPROM contents. + */ + +/* + * HW MAC address. + */ +#define EEPROM_MAC_ADDR_0 0x0002 +#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) +#define EEPROM_MAC_ADDR1 0x0003 +#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) +#define EEPROM_MAC_ADDR_2 0x0004 +#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) + +/* + * EEPROM antenna. + * ANTENNA_NUM: Number of antenna's. + * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. + * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. + * LED_MODE: 0: default, 1: TX/RX activity, 2: Single (ignore link), 3: rsvd. + * DYN_TXAGC: Dynamic TX AGC control. + * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. + * RF_TYPE: Rf_type of this adapter. + */ +#define EEPROM_ANTENNA 0x000b +#define EEPROM_ANTENNA_NUM FIELD16(0x0003) +#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) +#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) +#define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0) +#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) +#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) +#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) + +/* + * EEPROM NIC config. + * CARDBUS_ACCEL: 0: enable, 1: disable. + * DYN_BBP_TUNE: 0: enable, 1: disable. + * CCK_TX_POWER: CCK TX power compensation. + */ +#define EEPROM_NIC 0x000c +#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001) +#define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002) +#define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c) + +/* + * EEPROM geography. + * GEO: Default geography setting for device. + */ +#define EEPROM_GEOGRAPHY 0x000d +#define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00) + +/* + * EEPROM BBP. + */ +#define EEPROM_BBP_START 0x000e +#define EEPROM_BBP_SIZE 16 +#define EEPROM_BBP_VALUE FIELD16(0x00ff) +#define EEPROM_BBP_REG_ID FIELD16(0xff00) + +/* + * EEPROM TXPOWER + */ +#define EEPROM_TXPOWER_START 0x001e +#define EEPROM_TXPOWER_SIZE 7 +#define EEPROM_TXPOWER_1 FIELD16(0x00ff) +#define EEPROM_TXPOWER_2 FIELD16(0xff00) + +/* + * EEPROM Tuning threshold + */ +#define EEPROM_BBPTUNE 0x0030 +#define EEPROM_BBPTUNE_THRESHOLD FIELD16(0x00ff) + +/* + * EEPROM BBP R24 Tuning. + */ +#define EEPROM_BBPTUNE_R24 0x0031 +#define EEPROM_BBPTUNE_R24_LOW FIELD16(0x00ff) +#define EEPROM_BBPTUNE_R24_HIGH FIELD16(0xff00) + +/* + * EEPROM BBP R25 Tuning. + */ +#define EEPROM_BBPTUNE_R25 0x0032 +#define EEPROM_BBPTUNE_R25_LOW FIELD16(0x00ff) +#define EEPROM_BBPTUNE_R25_HIGH FIELD16(0xff00) + +/* + * EEPROM BBP R24 Tuning. + */ +#define EEPROM_BBPTUNE_R61 0x0033 +#define EEPROM_BBPTUNE_R61_LOW FIELD16(0x00ff) +#define EEPROM_BBPTUNE_R61_HIGH FIELD16(0xff00) + +/* + * EEPROM BBP VGC Tuning. + */ +#define EEPROM_BBPTUNE_VGC 0x0034 +#define EEPROM_BBPTUNE_VGCUPPER FIELD16(0x00ff) + +/* + * EEPROM BBP R17 Tuning. + */ +#define EEPROM_BBPTUNE_R17 0x0035 +#define EEPROM_BBPTUNE_R17_LOW FIELD16(0x00ff) +#define EEPROM_BBPTUNE_R17_HIGH FIELD16(0xff00) + +/* + * RSSI <-> dBm offset calibration + */ +#define EEPROM_CALIBRATE_OFFSET 0x0036 +#define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff) + +/* + * DMA descriptor defines. + */ +#define TXD_DESC_SIZE ( 5 * sizeof(struct data_desc) ) +#define RXD_DESC_SIZE ( 4 * sizeof(struct data_desc) ) + +/* + * TX descriptor format for TX, PRIO, ATIM and Beacon Ring. + */ + +/* + * Word0 + */ +#define TXD_W0_PACKET_ID FIELD32(0x0000000f) +#define TXD_W0_RETRY_LIMIT FIELD32(0x000000f0) +#define TXD_W0_MORE_FRAG FIELD32(0x00000100) +#define TXD_W0_ACK FIELD32(0x00000200) +#define TXD_W0_TIMESTAMP FIELD32(0x00000400) +#define TXD_W0_OFDM FIELD32(0x00000800) +#define TXD_W0_NEW_SEQ FIELD32(0x00001000) +#define TXD_W0_IFS FIELD32(0x00006000) +#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) +#define TXD_W0_CIPHER FIELD32(0x20000000) +#define TXD_W0_KEY_ID FIELD32(0xc0000000) + +/* + * Word1 + */ +#define TXD_W1_IV_OFFSET FIELD32(0x0000003f) +#define TXD_W1_AIFS FIELD32(0x000000c0) +#define TXD_W1_CWMIN FIELD32(0x00000f00) +#define TXD_W1_CWMAX FIELD32(0x0000f000) + +/* + * Word2: PLCP information + */ +#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff) +#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00) +#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000) +#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000) + +/* + * Word3 + */ +#define TXD_W3_IV FIELD32(0xffffffff) + +/* + * Word4 + */ +#define TXD_W4_EIV FIELD32(0xffffffff) + +/* + * RX descriptor format for RX Ring. + */ + +/* + * Word0 + */ +#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002) +#define RXD_W0_MULTICAST FIELD32(0x00000004) +#define RXD_W0_BROADCAST FIELD32(0x00000008) +#define RXD_W0_MY_BSS FIELD32(0x00000010) +#define RXD_W0_CRC_ERROR FIELD32(0x00000020) +#define RXD_W0_OFDM FIELD32(0x00000040) +#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080) +#define RXD_W0_CIPHER FIELD32(0x00000100) +#define RXD_W0_CIPHER_ERROR FIELD32(0x00000200) +#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) + +/* + * Word1 + */ +#define RXD_W1_RSSI FIELD32(0x000000ff) +#define RXD_W1_SIGNAL FIELD32(0x0000ff00) + +/* + * Word2 + */ +#define RXD_W2_IV FIELD32(0xffffffff) + +/* + * Word3 + */ +#define RXD_W3_EIV FIELD32(0xffffffff) + +/* + * Macro's for converting txpower from EEPROM to dscape value + * and from dscape value to register value. + */ +#define MIN_TXPOWER 0 +#define MAX_TXPOWER 31 +#define DEFAULT_TXPOWER 24 + +#define TXPOWER_FROM_DEV(__txpower) \ +({ \ + ((__txpower) > MAX_TXPOWER) ? \ + DEFAULT_TXPOWER : (__txpower); \ +}) + +#define TXPOWER_TO_DEV(__txpower) \ +({ \ + ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ + (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ + (__txpower)); \ +}) + +#endif /* RT2500USB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h new file mode 100644 index 000000000000..80b079d723d6 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -0,0 +1,807 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00 + Abstract: rt2x00 global information. + */ + +#ifndef RT2X00_H +#define RT2X00_H + +#include +#include +#include +#include +#include + +#include + +#include "rt2x00debug.h" +#include "rt2x00reg.h" +#include "rt2x00ring.h" + +/* + * Module information. + * DRV_NAME should be set within the individual module source files. + */ +#define DRV_VERSION "2.0.8" +#define DRV_PROJECT "http://rt2x00.serialmonkey.com" + +/* + * Debug definitions. + * Debug output has to be enabled during compile time. + */ +#define DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, __args...) \ + printk(__kernlvl "%s -> %s: %s - " __msg, \ + wiphy_name((__dev)->hw->wiphy), __FUNCTION__, __lvl, ##__args) + +#define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...) \ + printk(__kernlvl "%s -> %s: %s - " __msg, \ + DRV_NAME, __FUNCTION__, __lvl, ##__args) + +#ifdef CONFIG_RT2X00_DEBUG +#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \ + DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, ##__args); +#else +#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \ + do { } while (0) +#endif /* CONFIG_RT2X00_DEBUG */ + +/* + * Various debug levels. + * The debug levels PANIC and ERROR both indicate serious problems, + * for this reason they should never be ignored. + * The special ERROR_PROBE message is for messages that are generated + * when the rt2x00_dev is not yet initialized. + */ +#define PANIC(__dev, __msg, __args...) \ + DEBUG_PRINTK_MSG(__dev, KERN_CRIT, "Panic", __msg, ##__args) +#define ERROR(__dev, __msg, __args...) \ + DEBUG_PRINTK_MSG(__dev, KERN_ERR, "Error", __msg, ##__args) +#define ERROR_PROBE(__msg, __args...) \ + DEBUG_PRINTK_PROBE(KERN_ERR, "Error", __msg, ##__args) +#define WARNING(__dev, __msg, __args...) \ + DEBUG_PRINTK(__dev, KERN_WARNING, "Warning", __msg, ##__args) +#define NOTICE(__dev, __msg, __args...) \ + DEBUG_PRINTK(__dev, KERN_NOTICE, "Notice", __msg, ##__args) +#define INFO(__dev, __msg, __args...) \ + DEBUG_PRINTK(__dev, KERN_INFO, "Info", __msg, ##__args) +#define DEBUG(__dev, __msg, __args...) \ + DEBUG_PRINTK(__dev, KERN_DEBUG, "Debug", __msg, ##__args) +#define EEPROM(__dev, __msg, __args...) \ + DEBUG_PRINTK(__dev, KERN_DEBUG, "EEPROM recovery", __msg, ##__args) + +/* + * Ring sizes. + * Ralink PCI devices demand the Frame size to be a multiple of 128 bytes. + * DATA_FRAME_SIZE is used for TX, RX, ATIM and PRIO rings. + * MGMT_FRAME_SIZE is used for the BEACON ring. + */ +#define DATA_FRAME_SIZE 2432 +#define MGMT_FRAME_SIZE 256 + +/* + * Number of entries in a packet ring. + * PCI devices only need 1 Beacon entry, + * but USB devices require a second because they + * have to send a Guardian byte first. + */ +#define RX_ENTRIES 12 +#define TX_ENTRIES 12 +#define ATIM_ENTRIES 1 +#define BEACON_ENTRIES 2 + +/* + * Standard timing and size defines. + * These values should follow the ieee80211 specifications. + */ +#define ACK_SIZE 14 +#define IEEE80211_HEADER 24 +#define PLCP 48 +#define BEACON 100 +#define PREAMBLE 144 +#define SHORT_PREAMBLE 72 +#define SLOT_TIME 20 +#define SHORT_SLOT_TIME 9 +#define SIFS 10 +#define PIFS ( SIFS + SLOT_TIME ) +#define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME ) +#define DIFS ( PIFS + SLOT_TIME ) +#define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME ) +#define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) + +/* + * IEEE802.11 header defines + */ +static inline int is_rts_frame(u16 fc) +{ + return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && + ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_RTS)); +} + +static inline int is_cts_frame(u16 fc) +{ + return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && + ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_CTS)); +} + +static inline int is_probe_resp(u16 fc) +{ + return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && + ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP)); +} + +/* + * Chipset identification + * The chipset on the device is composed of a RT and RF chip. + * The chipset combination is important for determining device capabilities. + */ +struct rt2x00_chip { + u16 rt; +#define RT2460 0x0101 +#define RT2560 0x0201 +#define RT2570 0x1201 +#define RT2561 0x0301 +#define RT2561s 0x0302 +#define RT2661 0x0401 +#define RT2571 0x1300 + + u16 rf; + u32 rev; +}; + +/* + * RF register values that belong to a particular channel. + */ +struct rf_channel { + int channel; + u32 rf1; + u32 rf2; + u32 rf3; + u32 rf4; +}; + +/* + * To optimize the quality of the link we need to store + * the quality of received frames and periodically + * optimize the link. + */ +struct link { + /* + * Link tuner counter + * The number of times the link has been tuned + * since the radio has been switched on. + */ + u32 count; + + /* + * Statistics required for Link tuning. + * For the average RSSI value we use the "Walking average" approach. + * When adding RSSI to the average value the following calculation + * is needed: + * + * avg_rssi = ((avg_rssi * 7) + rssi) / 8; + * + * The advantage of this approach is that we only need 1 variable + * to store the average in (No need for a count and a total). + * But more importantly, normal average values will over time + * move less and less towards newly added values this results + * that with link tuning, the device can have a very good RSSI + * for a few minutes but when the device is moved away from the AP + * the average will not decrease fast enough to compensate. + * The walking average compensates this and will move towards + * the new values correctly allowing a effective link tuning. + */ + int avg_rssi; + int vgc_level; + int false_cca; + + /* + * Statistics required for Signal quality calculation. + * For calculating the Signal quality we have to determine + * the total number of success and failed RX and TX frames. + * After that we also use the average RSSI value to help + * determining the signal quality. + * For the calculation we will use the following algorithm: + * + * rssi_percentage = (avg_rssi * 100) / rssi_offset + * rx_percentage = (rx_success * 100) / rx_total + * tx_percentage = (tx_success * 100) / tx_total + * avg_signal = ((WEIGHT_RSSI * avg_rssi) + + * (WEIGHT_TX * tx_percentage) + + * (WEIGHT_RX * rx_percentage)) / 100 + * + * This value should then be checked to not be greated then 100. + */ + int rx_percentage; + int rx_success; + int rx_failed; + int tx_percentage; + int tx_success; + int tx_failed; +#define WEIGHT_RSSI 20 +#define WEIGHT_RX 40 +#define WEIGHT_TX 40 + + /* + * Work structure for scheduling periodic link tuning. + */ + struct delayed_work work; +}; + +/* + * Clear all counters inside the link structure. + * This can be easiest achieved by memsetting everything + * except for the work structure at the end. + */ +static inline void rt2x00_clear_link(struct link *link) +{ + memset(link, 0x00, sizeof(*link) - sizeof(link->work)); + link->rx_percentage = 50; + link->tx_percentage = 50; +} + +/* + * Update the rssi using the walking average approach. + */ +static inline void rt2x00_update_link_rssi(struct link *link, int rssi) +{ + if (!link->avg_rssi) + link->avg_rssi = rssi; + else + link->avg_rssi = ((link->avg_rssi * 7) + rssi) / 8; +} + +/* + * When the avg_rssi is unset or no frames have been received), + * we need to return the default value which needs to be less + * than -80 so the device will select the maximum sensitivity. + */ +static inline int rt2x00_get_link_rssi(struct link *link) +{ + return (link->avg_rssi && link->rx_success) ? link->avg_rssi : -128; +} + +/* + * Interface structure + * Configuration details about the current interface. + */ +struct interface { + /* + * Interface identification. The value is assigned + * to us by the 80211 stack, and is used to request + * new beacons. + */ + int id; + + /* + * Current working type (IEEE80211_IF_TYPE_*). + * This excludes the type IEEE80211_IF_TYPE_MNTR + * since that is counted seperately in the monitor_count + * field. + * When set to INVALID_INTERFACE, no interface is configured. + */ + int type; +#define INVALID_INTERFACE IEEE80211_IF_TYPE_MGMT + + /* + * MAC of the device. + */ + u8 mac[ETH_ALEN]; + + /* + * BBSID of the AP to associate with. + */ + u8 bssid[ETH_ALEN]; + + /* + * Store the packet filter mode for the current interface. + * monitor mode always disabled filtering. But in such + * cases we still need to store the value here in case + * the monitor mode interfaces are removed, while a + * non-monitor mode interface remains. + */ + unsigned short filter; + + /* + * Monitor mode count, the number of interfaces + * in monitor mode that that have been added. + */ + unsigned short monitor_count; +}; + +static inline int is_interface_present(struct interface *intf) +{ + return !!intf->id; +} + +static inline int is_monitor_present(struct interface *intf) +{ + return !!intf->monitor_count; +} + +/* + * Details about the supported modes, rates and channels + * of a particular chipset. This is used by rt2x00lib + * to build the ieee80211_hw_mode array for mac80211. + */ +struct hw_mode_spec { + /* + * Number of modes, rates and channels. + */ + int num_modes; + int num_rates; + int num_channels; + + /* + * txpower values. + */ + const u8 *tx_power_a; + const u8 *tx_power_bg; + u8 tx_power_default; + + /* + * Device/chipset specific value. + */ + const struct rf_channel *channels; +}; + +/* + * rt2x00lib callback functions. + */ +struct rt2x00lib_ops { + /* + * Interrupt handlers. + */ + irq_handler_t irq_handler; + + /* + * Device init handlers. + */ + int (*probe_hw) (struct rt2x00_dev *rt2x00dev); + char *(*get_firmware_name) (struct rt2x00_dev *rt2x00dev); + int (*load_firmware) (struct rt2x00_dev *rt2x00dev, void *data, + const size_t len); + + /* + * Device initialization/deinitialization handlers. + */ + int (*initialize) (struct rt2x00_dev *rt2x00dev); + void (*uninitialize) (struct rt2x00_dev *rt2x00dev); + + /* + * Radio control handlers. + */ + int (*set_device_state) (struct rt2x00_dev *rt2x00dev, + enum dev_state state); + int (*rfkill_poll) (struct rt2x00_dev *rt2x00dev); + void (*link_stats) (struct rt2x00_dev *rt2x00dev); + void (*reset_tuner) (struct rt2x00_dev *rt2x00dev); + void (*link_tuner) (struct rt2x00_dev *rt2x00dev); + + /* + * TX control handlers + */ + void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev, + struct data_desc *txd, + struct data_entry_desc *desc, + struct ieee80211_hdr *ieee80211hdr, + unsigned int length, + struct ieee80211_tx_control *control); + int (*write_tx_data) (struct rt2x00_dev *rt2x00dev, + struct data_ring *ring, struct sk_buff *skb, + struct ieee80211_tx_control *control); + void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev, + unsigned int queue); + + /* + * RX control handlers + */ + int (*fill_rxdone) (struct data_entry *entry, + int *signal, int *rssi, int *ofdm, int *size); + + /* + * Configuration handlers. + */ + void (*config_mac_addr) (struct rt2x00_dev *rt2x00dev, u8 *mac); + void (*config_bssid) (struct rt2x00_dev *rt2x00dev, u8 *bssid); + void (*config_packet_filter) (struct rt2x00_dev *rt2x00dev, + const unsigned int filter); + void (*config_type) (struct rt2x00_dev *rt2x00dev, const int type); + void (*config) (struct rt2x00_dev *rt2x00dev, const unsigned int flags, + struct ieee80211_conf *conf); +#define CONFIG_UPDATE_PHYMODE ( 1 << 1 ) +#define CONFIG_UPDATE_CHANNEL ( 1 << 2 ) +#define CONFIG_UPDATE_TXPOWER ( 1 << 3 ) +#define CONFIG_UPDATE_ANTENNA ( 1 << 4 ) +#define CONFIG_UPDATE_SLOT_TIME ( 1 << 5 ) +#define CONFIG_UPDATE_BEACON_INT ( 1 << 6 ) +#define CONFIG_UPDATE_ALL 0xffff +}; + +/* + * rt2x00 driver callback operation structure. + */ +struct rt2x00_ops { + const char *name; + const unsigned int rxd_size; + const unsigned int txd_size; + const unsigned int eeprom_size; + const unsigned int rf_size; + const struct rt2x00lib_ops *lib; + const struct ieee80211_ops *hw; +#ifdef CONFIG_RT2X00_LIB_DEBUGFS + const struct rt2x00debug *debugfs; +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ +}; + +/* + * rt2x00 device structure. + */ +struct rt2x00_dev { + /* + * Device structure. + * The structure stored in here depends on the + * system bus (PCI or USB). + * When accessing this variable, the rt2x00dev_{pci,usb} + * macro's should be used for correct typecasting. + */ + void *dev; +#define rt2x00dev_pci(__dev) ( (struct pci_dev*)(__dev)->dev ) +#define rt2x00dev_usb(__dev) ( (struct usb_interface*)(__dev)->dev ) + + /* + * Callback functions. + */ + const struct rt2x00_ops *ops; + + /* + * IEEE80211 control structure. + */ + struct ieee80211_hw *hw; + struct ieee80211_hw_mode *hwmodes; + unsigned int curr_hwmode; +#define HWMODE_B 0 +#define HWMODE_G 1 +#define HWMODE_A 2 + + /* + * rfkill structure for RF state switching support. + * This will only be compiled in when required. + */ +#ifdef CONFIG_RT2X00_LIB_RFKILL + struct rfkill *rfkill; + struct input_polled_dev *poll_dev; +#endif /* CONFIG_RT2X00_LIB_RFKILL */ + + /* + * If enabled, the debugfs interface structures + * required for deregistration of debugfs. + */ +#ifdef CONFIG_RT2X00_LIB_DEBUGFS + const struct rt2x00debug_intf *debugfs_intf; +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + + /* + * Device flags. + * In these flags the current status and some + * of the device capabilities are stored. + */ + unsigned long flags; +#define DEVICE_ENABLED_RADIO 1 +#define DEVICE_ENABLED_RADIO_HW 2 +#define DEVICE_INITIALIZED 3 +#define DEVICE_INITIALIZED_HW 4 +#define REQUIRE_FIRMWARE 5 +#define PACKET_FILTER_SCHEDULED 6 +#define PACKET_FILTER_PENDING 7 +#define INTERFACE_RESUME 8 +#define INTERFACE_ENABLED 9 +#define INTERFACE_ENABLED_MONITOR 10 +#define REQUIRE_BEACON_RING 11 +#define DEVICE_SUPPORT_HW_BUTTON 12 +#define CONFIG_FRAME_TYPE 13 +#define CONFIG_RF_SEQUENCE 14 +/* Hole: Add new Flag here */ +#define CONFIG_EXTERNAL_LNA_A 16 +#define CONFIG_EXTERNAL_LNA_BG 17 +#define CONFIG_DOUBLE_ANTENNA 18 +#define CONFIG_DISABLE_LINK_TUNING 19 + + /* + * Chipset identification. + */ + struct rt2x00_chip chip; + + /* + * hw capability specifications. + */ + struct hw_mode_spec spec; + + /* + * Register pointers + * csr_addr: Base register address. (PCI) + * csr_cache: CSR cache for usb_control_msg. (USB) + */ + void __iomem *csr_addr; + void *csr_cache; + + /* + * Interface configuration. + */ + struct interface interface; + + /* + * Link quality + */ + struct link link; + + /* + * EEPROM data. + */ + __le16 *eeprom; + + /* + * Active RF register values. + * These are stored here so we don't need + * to read the rf registers and can directly + * use this value instead. + * This field should be accessed by using + * rt2x00_rf_read() and rt2x00_rf_write(). + */ + u32 *rf; + + /* + * Current TX power value. + */ + u16 tx_power; + + /* + * LED register (for rt61pci & rt73usb). + */ + u16 led_reg; + + /* + * Led mode (LED_MODE_*) + */ + u8 led_mode; + + /* + * Rssi <-> Dbm offset + */ + u8 rssi_offset; + + /* + * Frequency offset (for rt61pci & rt73usb). + */ + u8 freq_offset; + + /* + * Low level statistics which will have + * to be kept up to date while device is running. + */ + struct ieee80211_low_level_stats low_level_stats; + + /* + * RX configuration information. + */ + struct ieee80211_rx_status rx_status; + + /* + * Beacon scheduled work. + */ + struct work_struct beacon_work; + + /* + * Data ring arrays for RX, TX and Beacon. + * The Beacon array also contains the Atim ring + * if that is supported by the device. + */ + int data_rings; + struct data_ring *rx; + struct data_ring *tx; + struct data_ring *bcn; + + /* + * Firmware image. + */ + const struct firmware *fw; +}; + +/* + * For-each loop for the ring array. + * All rings have been allocated as a single array, + * this means we can create a very simply loop macro + * that is capable of looping through all rings. + * ring_end(), txring_end() and ring_loop() are helper macro's which + * should not be used directly. Instead the following should be used: + * ring_for_each() - Loops through all rings (RX, TX, Beacon & Atim) + * txring_for_each() - Loops through TX data rings (TX only) + * txringall_for_each() - Loops through all TX rings (TX, Beacon & Atim) + */ +#define ring_end(__dev) \ + &(__dev)->rx[(__dev)->data_rings] + +#define txring_end(__dev) \ + &(__dev)->tx[(__dev)->hw->queues] + +#define ring_loop(__entry, __start, __end) \ + for ((__entry) = (__start); \ + prefetch(&(__entry)[1]), (__entry) != (__end); \ + (__entry) = &(__entry)[1]) + +#define ring_for_each(__dev, __entry) \ + ring_loop(__entry, (__dev)->rx, ring_end(__dev)) + +#define txring_for_each(__dev, __entry) \ + ring_loop(__entry, (__dev)->tx, txring_end(__dev)) + +#define txringall_for_each(__dev, __entry) \ + ring_loop(__entry, (__dev)->tx, ring_end(__dev)) + +/* + * Generic RF access. + * The RF is being accessed by word index. + */ +static inline void rt2x00_rf_read(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u32 *data) +{ + *data = rt2x00dev->rf[word]; +} + +static inline void rt2x00_rf_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u32 data) +{ + rt2x00dev->rf[word] = data; +} + +/* + * Generic EEPROM access. + * The EEPROM is being accessed by word index. + */ +static inline void *rt2x00_eeprom_addr(const struct rt2x00_dev *rt2x00dev, + const unsigned int word) +{ + return (void *)&rt2x00dev->eeprom[word]; +} + +static inline void rt2x00_eeprom_read(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u16 *data) +{ + *data = le16_to_cpu(rt2x00dev->eeprom[word]); +} + +static inline void rt2x00_eeprom_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u16 data) +{ + rt2x00dev->eeprom[word] = cpu_to_le16(data); +} + +/* + * Chipset handlers + */ +static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev, + const u16 rt, const u16 rf, const u32 rev) +{ + INFO(rt2x00dev, + "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n", + rt, rf, rev); + + rt2x00dev->chip.rt = rt; + rt2x00dev->chip.rf = rf; + rt2x00dev->chip.rev = rev; +} + +static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip) +{ + return (chipset->rt == chip); +} + +static inline char rt2x00_rf(const struct rt2x00_chip *chipset, const u16 chip) +{ + return (chipset->rf == chip); +} + +static inline u16 rt2x00_get_rev(const struct rt2x00_chip *chipset) +{ + return chipset->rev; +} + +static inline u16 rt2x00_rev(const struct rt2x00_chip *chipset, const u32 mask) +{ + return chipset->rev & mask; +} + +/* + * Duration calculations + * The rate variable passed is: 100kbs. + * To convert from bytes to bits we multiply size with 8, + * then the size is multiplied with 10 to make the + * real rate -> rate argument correction. + */ +static inline u16 get_duration(const unsigned int size, const u8 rate) +{ + return ((size * 8 * 10) / rate); +} + +static inline u16 get_duration_res(const unsigned int size, const u8 rate) +{ + return ((size * 8 * 10) % rate); +} + +/* + * Library functions. + */ +struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev, + const unsigned int queue); + +/* + * Interrupt context handlers. + */ +void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev); +void rt2x00lib_txdone(struct data_entry *entry, + const int status, const int retry); +void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb, + const int signal, const int rssi, const int ofdm); + +/* + * TX descriptor initializer + */ +void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, + struct data_desc *txd, + struct ieee80211_hdr *ieee80211hdr, + unsigned int length, + struct ieee80211_tx_control *control); + +/* + * mac80211 handlers. + */ +int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *control); +int rt2x00mac_start(struct ieee80211_hw *hw); +void rt2x00mac_stop(struct ieee80211_hw *hw); +int rt2x00mac_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf); +void rt2x00mac_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf); +int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf); +int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id, + struct ieee80211_if_conf *conf); +void rt2x00mac_set_multicast_list(struct ieee80211_hw *hw, + unsigned short flags, int mc_count); +int rt2x00mac_get_stats(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats); +int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw, + struct ieee80211_tx_queue_stats *stats); +int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue, + const struct ieee80211_tx_queue_params *params); + +/* + * Driver allocation handlers. + */ +int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev); +void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev); +#ifdef CONFIG_PM +int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state); +int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev); +#endif /* CONFIG_PM */ + +#endif /* RT2X00_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c new file mode 100644 index 000000000000..de890a17d8fd --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -0,0 +1,165 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 generic configuration routines. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt2x00lib" + +#include +#include + +#include "rt2x00.h" +#include "rt2x00lib.h" + +void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac) +{ + if (mac) + rt2x00dev->ops->lib->config_mac_addr(rt2x00dev, mac); +} + +void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid) +{ + if (bssid) + rt2x00dev->ops->lib->config_bssid(rt2x00dev, bssid); +} + +void rt2x00lib_config_packet_filter(struct rt2x00_dev *rt2x00dev, int filter) +{ + /* + * Only configure the device when something has changed, + * or if we are in RESUME state in which case all configuration + * will be forced upon the device. + */ + if (!test_bit(INTERFACE_RESUME, &rt2x00dev->flags) && + !test_bit(PACKET_FILTER_PENDING, &rt2x00dev->flags)) + return; + + /* + * Write configuration to device and clear the update flag. + */ + rt2x00dev->ops->lib->config_packet_filter(rt2x00dev, filter); + __clear_bit(PACKET_FILTER_PENDING, &rt2x00dev->flags); +} + +void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, int type) +{ + struct interface *intf = &rt2x00dev->interface; + + /* + * Fallback when a invalid interface is attempted to + * be configured. If a monitor interface is present, + * we are going configure that, otherwise exit. + */ + if (type == INVALID_INTERFACE) { + if (is_monitor_present(intf)) + type = IEEE80211_IF_TYPE_MNTR; + else + return; + } + + /* + * Only configure the device when something has changed, + * or if we are in RESUME state in which case all configuration + * will be forced upon the device. + */ + if (!test_bit(INTERFACE_RESUME, &rt2x00dev->flags) && + (!(is_interface_present(intf) ^ + test_bit(INTERFACE_ENABLED, &rt2x00dev->flags)) && + !(is_monitor_present(intf) ^ + test_bit(INTERFACE_ENABLED_MONITOR, &rt2x00dev->flags)))) + return; + + /* + * Configure device. + */ + rt2x00dev->ops->lib->config_type(rt2x00dev, type); + + /* + * Update the configuration flags. + */ + if (type != IEEE80211_IF_TYPE_MNTR) { + if (is_interface_present(intf)) + __set_bit(INTERFACE_ENABLED, &rt2x00dev->flags); + else + __clear_bit(INTERFACE_ENABLED, &rt2x00dev->flags); + } else { + if (is_monitor_present(intf)) + __set_bit(INTERFACE_ENABLED_MONITOR, &rt2x00dev->flags); + else + __clear_bit(INTERFACE_ENABLED_MONITOR, + &rt2x00dev->flags); + } +} + +void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf) +{ + int flags = 0; + + /* + * If we are in RESUME state we should + * force all configuration options. + */ + if (test_bit(INTERFACE_RESUME, &rt2x00dev->flags)) { + flags = CONFIG_UPDATE_ALL; + goto config; + } + + /* + * Check which configuration options have been + * updated and should be send to the device. + */ + if (rt2x00dev->rx_status.phymode != conf->phymode) + flags |= CONFIG_UPDATE_PHYMODE; + if (rt2x00dev->rx_status.channel != conf->channel) + flags |= CONFIG_UPDATE_CHANNEL; + if (rt2x00dev->tx_power != conf->power_level) + flags |= CONFIG_UPDATE_TXPOWER; + if (rt2x00dev->rx_status.antenna == conf->antenna_sel_rx) + flags |= CONFIG_UPDATE_ANTENNA; + + /* + * The following configuration options are never + * stored anywhere and will always be updated. + */ + flags |= CONFIG_UPDATE_SLOT_TIME; + flags |= CONFIG_UPDATE_BEACON_INT; + +config: + rt2x00dev->ops->lib->config(rt2x00dev, flags, conf); + + /* + * Some configuration changes affect the link quality + * which means we need to reset the link tuner. + */ + if (flags & (CONFIG_UPDATE_CHANNEL | CONFIG_UPDATE_ANTENNA)) + rt2x00lib_reset_link_tuner(rt2x00dev); + + rt2x00dev->rx_status.phymode = conf->phymode; + rt2x00dev->rx_status.freq = conf->freq; + rt2x00dev->rx_status.channel = conf->channel; + rt2x00dev->tx_power = conf->power_level; + rt2x00dev->rx_status.antenna = conf->antenna_sel_rx; +} diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c new file mode 100644 index 000000000000..4d2aaecd9dfe --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -0,0 +1,331 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 debugfs specific routines. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt2x00lib" + +#include +#include +#include +#include + +#include "rt2x00.h" +#include "rt2x00lib.h" + +#define PRINT_LINE_LEN_MAX 32 + +struct rt2x00debug_intf { + /* + * Pointer to driver structure where + * this debugfs entry belongs to. + */ + struct rt2x00_dev *rt2x00dev; + + /* + * Reference to the rt2x00debug structure + * which can be used to communicate with + * the registers. + */ + const struct rt2x00debug *debug; + + /* + * Debugfs entries for: + * - driver folder + * - driver file + * - chipset file + * - register offset/value files + * - eeprom offset/value files + * - bbp offset/value files + * - rf offset/value files + */ + struct dentry *driver_folder; + struct dentry *driver_entry; + struct dentry *chipset_entry; + struct dentry *csr_off_entry; + struct dentry *csr_val_entry; + struct dentry *eeprom_off_entry; + struct dentry *eeprom_val_entry; + struct dentry *bbp_off_entry; + struct dentry *bbp_val_entry; + struct dentry *rf_off_entry; + struct dentry *rf_val_entry; + + /* + * Driver and chipset files will use a data buffer + * that has been created in advance. This will simplify + * the code since we can use the debugfs functions. + */ + struct debugfs_blob_wrapper driver_blob; + struct debugfs_blob_wrapper chipset_blob; + + /* + * Requested offset for each register type. + */ + unsigned int offset_csr; + unsigned int offset_eeprom; + unsigned int offset_bbp; + unsigned int offset_rf; +}; + +static int rt2x00debug_file_open(struct inode *inode, struct file *file) +{ + struct rt2x00debug_intf *intf = inode->i_private; + + file->private_data = inode->i_private; + + if (!try_module_get(intf->debug->owner)) + return -EBUSY; + + return 0; +} + +static int rt2x00debug_file_release(struct inode *inode, struct file *file) +{ + struct rt2x00debug_intf *intf = file->private_data; + + module_put(intf->debug->owner); + + return 0; +} + +#define RT2X00DEBUGFS_OPS_READ(__name, __format, __type) \ +static ssize_t rt2x00debug_read_##__name(struct file *file, \ + char __user *buf, \ + size_t length, \ + loff_t *offset) \ +{ \ + struct rt2x00debug_intf *intf = file->private_data; \ + const struct rt2x00debug *debug = intf->debug; \ + char line[16]; \ + size_t size; \ + __type value; \ + \ + if (*offset) \ + return 0; \ + \ + if (intf->offset_##__name >= debug->__name.word_count) \ + return -EINVAL; \ + \ + debug->__name.read(intf->rt2x00dev, \ + intf->offset_##__name, &value); \ + \ + size = sprintf(line, __format, value); \ + \ + if (copy_to_user(buf, line, size)) \ + return -EFAULT; \ + \ + *offset += size; \ + return size; \ +} + +#define RT2X00DEBUGFS_OPS_WRITE(__name, __type) \ +static ssize_t rt2x00debug_write_##__name(struct file *file, \ + const char __user *buf,\ + size_t length, \ + loff_t *offset) \ +{ \ + struct rt2x00debug_intf *intf = file->private_data; \ + const struct rt2x00debug *debug = intf->debug; \ + char line[16]; \ + size_t size; \ + __type value; \ + \ + if (*offset) \ + return 0; \ + \ + if (!capable(CAP_NET_ADMIN)) \ + return -EPERM; \ + \ + if (intf->offset_##__name >= debug->__name.word_count) \ + return -EINVAL; \ + \ + if (copy_from_user(line, buf, length)) \ + return -EFAULT; \ + \ + size = strlen(line); \ + value = simple_strtoul(line, NULL, 0); \ + \ + debug->__name.write(intf->rt2x00dev, \ + intf->offset_##__name, value); \ + \ + *offset += size; \ + return size; \ +} + +#define RT2X00DEBUGFS_OPS(__name, __format, __type) \ +RT2X00DEBUGFS_OPS_READ(__name, __format, __type); \ +RT2X00DEBUGFS_OPS_WRITE(__name, __type); \ + \ +static const struct file_operations rt2x00debug_fop_##__name = {\ + .owner = THIS_MODULE, \ + .read = rt2x00debug_read_##__name, \ + .write = rt2x00debug_write_##__name, \ + .open = rt2x00debug_file_open, \ + .release = rt2x00debug_file_release, \ +}; + +RT2X00DEBUGFS_OPS(csr, "0x%.8x\n", u32); +RT2X00DEBUGFS_OPS(eeprom, "0x%.4x\n", u16); +RT2X00DEBUGFS_OPS(bbp, "0x%.2x\n", u8); +RT2X00DEBUGFS_OPS(rf, "0x%.8x\n", u32); + +static struct dentry *rt2x00debug_create_file_driver(const char *name, + struct rt2x00debug_intf + *intf, + struct debugfs_blob_wrapper + *blob) +{ + char *data; + + data = kzalloc(3 * PRINT_LINE_LEN_MAX, GFP_KERNEL); + if (!data) + return NULL; + + blob->data = data; + data += sprintf(data, "driver: %s\n", intf->rt2x00dev->ops->name); + data += sprintf(data, "version: %s\n", DRV_VERSION); + data += sprintf(data, "compiled: %s %s\n", __DATE__, __TIME__); + blob->size = strlen(blob->data); + + return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob); +} + +static struct dentry *rt2x00debug_create_file_chipset(const char *name, + struct rt2x00debug_intf + *intf, + struct + debugfs_blob_wrapper + *blob) +{ + const struct rt2x00debug *debug = intf->debug; + char *data; + + data = kzalloc(4 * PRINT_LINE_LEN_MAX, GFP_KERNEL); + if (!data) + return NULL; + + blob->data = data; + data += sprintf(data, "csr length: %d\n", debug->csr.word_count); + data += sprintf(data, "eeprom length: %d\n", debug->eeprom.word_count); + data += sprintf(data, "bbp length: %d\n", debug->bbp.word_count); + data += sprintf(data, "rf length: %d\n", debug->rf.word_count); + blob->size = strlen(blob->data); + + return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob); +} + +void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) +{ + const struct rt2x00debug *debug = rt2x00dev->ops->debugfs; + struct rt2x00debug_intf *intf; + + intf = kzalloc(sizeof(struct rt2x00debug_intf), GFP_KERNEL); + if (!intf) { + ERROR(rt2x00dev, "Failed to allocate debug handler.\n"); + return; + } + + intf->debug = debug; + intf->rt2x00dev = rt2x00dev; + rt2x00dev->debugfs_intf = intf; + + intf->driver_folder = + debugfs_create_dir(intf->rt2x00dev->ops->name, + rt2x00dev->hw->wiphy->debugfsdir); + if (IS_ERR(intf->driver_folder)) + goto exit; + + intf->driver_entry = + rt2x00debug_create_file_driver("driver", intf, &intf->driver_blob); + if (IS_ERR(intf->driver_entry)) + goto exit; + + intf->chipset_entry = + rt2x00debug_create_file_chipset("chipset", + intf, &intf->chipset_blob); + if (IS_ERR(intf->chipset_entry)) + goto exit; + +#define RT2X00DEBUGFS_CREATE_ENTRY(__intf, __name) \ +({ \ + (__intf)->__name##_off_entry = \ + debugfs_create_u32(__stringify(__name) "_offset", \ + S_IRUGO | S_IWUSR, \ + (__intf)->driver_folder, \ + &(__intf)->offset_##__name); \ + if (IS_ERR((__intf)->__name##_off_entry)) \ + goto exit; \ + \ + (__intf)->__name##_val_entry = \ + debugfs_create_file(__stringify(__name) "_value", \ + S_IRUGO | S_IWUSR, \ + (__intf)->driver_folder, \ + (__intf), &rt2x00debug_fop_##__name);\ + if (IS_ERR((__intf)->__name##_val_entry)) \ + goto exit; \ +}) + + RT2X00DEBUGFS_CREATE_ENTRY(intf, csr); + RT2X00DEBUGFS_CREATE_ENTRY(intf, eeprom); + RT2X00DEBUGFS_CREATE_ENTRY(intf, bbp); + RT2X00DEBUGFS_CREATE_ENTRY(intf, rf); + +#undef RT2X00DEBUGFS_CREATE_ENTRY + + return; + +exit: + rt2x00debug_deregister(rt2x00dev); + ERROR(rt2x00dev, "Failed to register debug handler.\n"); + + return; +} + +void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev) +{ + const struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf; + + if (unlikely(!intf)) + return; + + debugfs_remove(intf->rf_val_entry); + debugfs_remove(intf->rf_off_entry); + debugfs_remove(intf->bbp_val_entry); + debugfs_remove(intf->bbp_off_entry); + debugfs_remove(intf->eeprom_val_entry); + debugfs_remove(intf->eeprom_off_entry); + debugfs_remove(intf->csr_val_entry); + debugfs_remove(intf->csr_off_entry); + debugfs_remove(intf->chipset_entry); + debugfs_remove(intf->driver_entry); + debugfs_remove(intf->driver_folder); + kfree(intf->chipset_blob.data); + kfree(intf->driver_blob.data); + kfree(intf); + + rt2x00dev->debugfs_intf = NULL; +} diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.h b/drivers/net/wireless/rt2x00/rt2x00debug.h new file mode 100644 index 000000000000..860e8fa3a0da --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00debug.h @@ -0,0 +1,57 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00debug + Abstract: Data structures for the rt2x00debug. + */ + +#ifndef RT2X00DEBUG_H +#define RT2X00DEBUG_H + +struct rt2x00_dev; + +#define RT2X00DEBUGFS_REGISTER_ENTRY(__name, __type) \ +struct reg##__name { \ + void (*read)(const struct rt2x00_dev *rt2x00dev, \ + const unsigned int word, __type *data); \ + void (*write)(const struct rt2x00_dev *rt2x00dev, \ + const unsigned int word, __type data); \ + \ + unsigned int word_size; \ + unsigned int word_count; \ +} __name + +struct rt2x00debug { + /* + * Reference to the modules structure. + */ + struct module *owner; + + /* + * Register access entries. + */ + RT2X00DEBUGFS_REGISTER_ENTRY(csr, u32); + RT2X00DEBUGFS_REGISTER_ENTRY(eeprom, u16); + RT2X00DEBUGFS_REGISTER_ENTRY(bbp, u8); + RT2X00DEBUGFS_REGISTER_ENTRY(rf, u32); +}; + +#endif /* RT2X00DEBUG_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c new file mode 100644 index 000000000000..cd82eeface8f --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -0,0 +1,1133 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 generic device routines. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt2x00lib" + +#include +#include + +#include "rt2x00.h" +#include "rt2x00lib.h" + +/* + * Ring handler. + */ +struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev, + const unsigned int queue) +{ + int beacon = test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags); + + /* + * Check if we are requesting a reqular TX ring, + * or if we are requesting a Beacon or Atim ring. + * For Atim rings, we should check if it is supported. + */ + if (queue < rt2x00dev->hw->queues && rt2x00dev->tx) + return &rt2x00dev->tx[queue]; + + if (!rt2x00dev->bcn || !beacon) + return NULL; + + if (queue == IEEE80211_TX_QUEUE_BEACON) + return &rt2x00dev->bcn[0]; + else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON) + return &rt2x00dev->bcn[1]; + + return NULL; +} +EXPORT_SYMBOL_GPL(rt2x00lib_get_ring); + +/* + * Link tuning handlers + */ +static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + rt2x00_clear_link(&rt2x00dev->link); + + /* + * Reset the link tuner. + */ + rt2x00dev->ops->lib->reset_tuner(rt2x00dev); + + queue_delayed_work(rt2x00dev->hw->workqueue, + &rt2x00dev->link.work, LINK_TUNE_INTERVAL); +} + +static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + if (delayed_work_pending(&rt2x00dev->link.work)) + cancel_rearming_delayed_work(&rt2x00dev->link.work); +} + +void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + rt2x00lib_stop_link_tuner(rt2x00dev); + rt2x00lib_start_link_tuner(rt2x00dev); +} + +/* + * Radio control handlers. + */ +int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + int status; + + /* + * Don't enable the radio twice. + * And check if the hardware button has been disabled. + */ + if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || + (test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags) && + !test_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags))) + return 0; + + /* + * Enable radio. + */ + status = rt2x00dev->ops->lib->set_device_state(rt2x00dev, + STATE_RADIO_ON); + if (status) + return status; + + __set_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags); + + /* + * Enable RX. + */ + rt2x00lib_toggle_rx(rt2x00dev, 1); + + /* + * Start the TX queues. + */ + ieee80211_start_queues(rt2x00dev->hw); + + return 0; +} + +void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + if (!__test_and_clear_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + /* + * Stop beacon generation. + */ + if (work_pending(&rt2x00dev->beacon_work)) + cancel_work_sync(&rt2x00dev->beacon_work); + + /* + * Stop the TX queues. + */ + ieee80211_stop_queues(rt2x00dev->hw); + + /* + * Disable RX. + */ + rt2x00lib_toggle_rx(rt2x00dev, 0); + + /* + * Disable radio. + */ + rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF); +} + +void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, int enable) +{ + enum dev_state state = enable ? STATE_RADIO_RX_ON : STATE_RADIO_RX_OFF; + + /* + * When we are disabling the RX, we should also stop the link tuner. + */ + if (!enable) + rt2x00lib_stop_link_tuner(rt2x00dev); + + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); + + /* + * When we are enabling the RX, we should also start the link tuner. + */ + if (enable && is_interface_present(&rt2x00dev->interface)) + rt2x00lib_start_link_tuner(rt2x00dev); +} + +static void rt2x00lib_precalculate_link_signal(struct link *link) +{ + if (link->rx_failed || link->rx_success) + link->rx_percentage = + (link->rx_success * 100) / + (link->rx_failed + link->rx_success); + else + link->rx_percentage = 50; + + if (link->tx_failed || link->tx_success) + link->tx_percentage = + (link->tx_success * 100) / + (link->tx_failed + link->tx_success); + else + link->tx_percentage = 50; + + link->rx_success = 0; + link->rx_failed = 0; + link->tx_success = 0; + link->tx_failed = 0; +} + +static int rt2x00lib_calculate_link_signal(struct rt2x00_dev *rt2x00dev, + int rssi) +{ + int rssi_percentage = 0; + int signal; + + /* + * We need a positive value for the RSSI. + */ + if (rssi < 0) + rssi += rt2x00dev->rssi_offset; + + /* + * Calculate the different percentages, + * which will be used for the signal. + */ + if (rt2x00dev->rssi_offset) + rssi_percentage = (rssi * 100) / rt2x00dev->rssi_offset; + + /* + * Add the individual percentages and use the WEIGHT + * defines to calculate the current link signal. + */ + signal = ((WEIGHT_RSSI * rssi_percentage) + + (WEIGHT_TX * rt2x00dev->link.tx_percentage) + + (WEIGHT_RX * rt2x00dev->link.rx_percentage)) / 100; + + return (signal > 100) ? 100 : signal; +} + +static void rt2x00lib_link_tuner(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, link.work.work); + + /* + * Update statistics. + */ + rt2x00dev->ops->lib->link_stats(rt2x00dev); + + rt2x00dev->low_level_stats.dot11FCSErrorCount += + rt2x00dev->link.rx_failed; + + rt2x00lib_precalculate_link_signal(&rt2x00dev->link); + + /* + * Only perform the link tuning when Link tuning + * has been enabled (This could have been disabled from the EEPROM). + */ + if (!test_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags)) + rt2x00dev->ops->lib->link_tuner(rt2x00dev); + + /* + * Increase tuner counter, and reschedule the next link tuner run. + */ + rt2x00dev->link.count++; + queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work, + LINK_TUNE_INTERVAL); +} + +/* + * Interrupt context handlers. + */ +static void rt2x00lib_beacondone_scheduled(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, beacon_work); + struct data_ring *ring = + rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + struct data_entry *entry = rt2x00_get_data_entry(ring); + struct sk_buff *skb; + + skb = ieee80211_beacon_get(rt2x00dev->hw, + rt2x00dev->interface.id, + &entry->tx_status.control); + if (!skb) + return; + + rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, skb, + &entry->tx_status.control); + + dev_kfree_skb(skb); +} + +void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) +{ + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->beacon_work); +} +EXPORT_SYMBOL_GPL(rt2x00lib_beacondone); + +void rt2x00lib_txdone(struct data_entry *entry, + const int status, const int retry) +{ + struct rt2x00_dev *rt2x00dev = entry->ring->rt2x00dev; + struct ieee80211_tx_status *tx_status = &entry->tx_status; + struct ieee80211_low_level_stats *stats = &rt2x00dev->low_level_stats; + int success = !!(status == TX_SUCCESS || status == TX_SUCCESS_RETRY); + int fail = !!(status == TX_FAIL_RETRY || status == TX_FAIL_INVALID || + status == TX_FAIL_OTHER); + + /* + * Update TX statistics. + */ + tx_status->flags = 0; + tx_status->ack_signal = 0; + tx_status->excessive_retries = (status == TX_FAIL_RETRY); + tx_status->retry_count = retry; + rt2x00dev->link.tx_success += success; + rt2x00dev->link.tx_failed += retry + fail; + + if (!(tx_status->control.flags & IEEE80211_TXCTL_NO_ACK)) { + if (success) + tx_status->flags |= IEEE80211_TX_STATUS_ACK; + else + stats->dot11ACKFailureCount++; + } + + tx_status->queue_length = entry->ring->stats.limit; + tx_status->queue_number = tx_status->control.queue; + + if (tx_status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) { + if (success) + stats->dot11RTSSuccessCount++; + else + stats->dot11RTSFailureCount++; + } + + /* + * Send the tx_status to mac80211, + * that method also cleans up the skb structure. + */ + ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb, tx_status); + entry->skb = NULL; +} +EXPORT_SYMBOL_GPL(rt2x00lib_txdone); + +void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb, + const int signal, const int rssi, const int ofdm) +{ + struct rt2x00_dev *rt2x00dev = entry->ring->rt2x00dev; + struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status; + struct ieee80211_hw_mode *mode; + struct ieee80211_rate *rate; + unsigned int i; + int val = 0; + + /* + * Update RX statistics. + */ + mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode]; + for (i = 0; i < mode->num_rates; i++) { + rate = &mode->rates[i]; + + /* + * When frame was received with an OFDM bitrate, + * the signal is the PLCP value. If it was received with + * a CCK bitrate the signal is the rate in 0.5kbit/s. + */ + if (!ofdm) + val = DEVICE_GET_RATE_FIELD(rate->val, RATE); + else + val = DEVICE_GET_RATE_FIELD(rate->val, PLCP); + + if (val == signal) { + val = rate->val; + break; + } + } + + rt2x00_update_link_rssi(&rt2x00dev->link, rssi); + rt2x00dev->link.rx_success++; + rx_status->rate = val; + rx_status->signal = rt2x00lib_calculate_link_signal(rt2x00dev, rssi); + rx_status->ssi = rssi; + + /* + * Send frame to mac80211 + */ + ieee80211_rx_irqsafe(rt2x00dev->hw, skb, rx_status); +} +EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); + +/* + * TX descriptor initializer + */ +void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, + struct data_desc *txd, + struct ieee80211_hdr *ieee80211hdr, + unsigned int length, + struct ieee80211_tx_control *control) +{ + struct data_entry_desc desc; + struct data_ring *ring; + int tx_rate; + int bitrate; + int duration; + int residual; + u16 frame_control; + u16 seq_ctrl; + + /* + * Make sure the descriptor is properly cleared. + */ + memset(&desc, 0x00, sizeof(desc)); + + /* + * Get ring pointer, if we fail to obtain the + * correct ring, then use the first TX ring. + */ + ring = rt2x00lib_get_ring(rt2x00dev, control->queue); + if (!ring) + ring = rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); + + desc.cw_min = ring->tx_params.cw_min; + desc.cw_max = ring->tx_params.cw_max; + desc.aifs = ring->tx_params.aifs; + + /* + * Identify queue + */ + if (control->queue < rt2x00dev->hw->queues) + desc.queue = control->queue; + else if (control->queue == IEEE80211_TX_QUEUE_BEACON || + control->queue == IEEE80211_TX_QUEUE_AFTER_BEACON) + desc.queue = QUEUE_MGMT; + else + desc.queue = QUEUE_OTHER; + + /* + * Read required fields from ieee80211 header. + */ + frame_control = le16_to_cpu(ieee80211hdr->frame_control); + seq_ctrl = le16_to_cpu(ieee80211hdr->seq_ctrl); + + tx_rate = control->tx_rate; + + /* + * Check if this is a RTS/CTS frame + */ + if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) { + __set_bit(ENTRY_TXD_BURST, &desc.flags); + if (is_rts_frame(frame_control)) + __set_bit(ENTRY_TXD_RTS_FRAME, &desc.flags); + if (control->rts_cts_rate) + tx_rate = control->rts_cts_rate; + } + + /* + * Check for OFDM + */ + if (DEVICE_GET_RATE_FIELD(tx_rate, RATEMASK) & DEV_OFDM_RATEMASK) + __set_bit(ENTRY_TXD_OFDM_RATE, &desc.flags); + + /* + * Check if more fragments are pending + */ + if (ieee80211_get_morefrag(ieee80211hdr)) { + __set_bit(ENTRY_TXD_BURST, &desc.flags); + __set_bit(ENTRY_TXD_MORE_FRAG, &desc.flags); + } + + /* + * Beacons and probe responses require the tsf timestamp + * to be inserted into the frame. + */ + if (control->queue == IEEE80211_TX_QUEUE_BEACON || + is_probe_resp(frame_control)) + __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc.flags); + + /* + * Determine with what IFS priority this frame should be send. + * Set ifs to IFS_SIFS when the this is not the first fragment, + * or this fragment came after RTS/CTS. + */ + if ((seq_ctrl & IEEE80211_SCTL_FRAG) > 0 || + test_bit(ENTRY_TXD_RTS_FRAME, &desc.flags)) + desc.ifs = IFS_SIFS; + else + desc.ifs = IFS_BACKOFF; + + /* + * PLCP setup + * Length calculation depends on OFDM/CCK rate. + */ + desc.signal = DEVICE_GET_RATE_FIELD(tx_rate, PLCP); + desc.service = 0x04; + + if (test_bit(ENTRY_TXD_OFDM_RATE, &desc.flags)) { + desc.length_high = ((length + FCS_LEN) >> 6) & 0x3f; + desc.length_low = ((length + FCS_LEN) & 0x3f); + } else { + bitrate = DEVICE_GET_RATE_FIELD(tx_rate, RATE); + + /* + * Convert length to microseconds. + */ + residual = get_duration_res(length + FCS_LEN, bitrate); + duration = get_duration(length + FCS_LEN, bitrate); + + if (residual != 0) { + duration++; + + /* + * Check if we need to set the Length Extension + */ + if (bitrate == 110 && residual <= 3) + desc.service |= 0x80; + } + + desc.length_high = (duration >> 8) & 0xff; + desc.length_low = duration & 0xff; + + /* + * When preamble is enabled we should set the + * preamble bit for the signal. + */ + if (DEVICE_GET_RATE_FIELD(tx_rate, PREAMBLE)) + desc.signal |= 0x08; + } + + rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, txd, &desc, + ieee80211hdr, length, control); +} +EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc); + +/* + * Driver initialization handlers. + */ +static void rt2x00lib_channel(struct ieee80211_channel *entry, + const int channel, const int tx_power, + const int value) +{ + entry->chan = channel; + if (channel <= 14) + entry->freq = 2407 + (5 * channel); + else + entry->freq = 5000 + (5 * channel); + entry->val = value; + entry->flag = + IEEE80211_CHAN_W_IBSS | + IEEE80211_CHAN_W_ACTIVE_SCAN | + IEEE80211_CHAN_W_SCAN; + entry->power_level = tx_power; + entry->antenna_max = 0xff; +} + +static void rt2x00lib_rate(struct ieee80211_rate *entry, + const int rate, const int mask, + const int plcp, const int flags) +{ + entry->rate = rate; + entry->val = + DEVICE_SET_RATE_FIELD(rate, RATE) | + DEVICE_SET_RATE_FIELD(mask, RATEMASK) | + DEVICE_SET_RATE_FIELD(plcp, PLCP); + entry->flags = flags; + entry->val2 = entry->val; + if (entry->flags & IEEE80211_RATE_PREAMBLE2) + entry->val2 |= DEVICE_SET_RATE_FIELD(1, PREAMBLE); + entry->min_rssi_ack = 0; + entry->min_rssi_ack_delta = 0; +} + +static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, + struct hw_mode_spec *spec) +{ + struct ieee80211_hw *hw = rt2x00dev->hw; + struct ieee80211_hw_mode *hwmodes; + struct ieee80211_channel *channels; + struct ieee80211_rate *rates; + unsigned int i; + unsigned char tx_power; + + hwmodes = kzalloc(sizeof(*hwmodes) * spec->num_modes, GFP_KERNEL); + if (!hwmodes) + goto exit; + + channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL); + if (!channels) + goto exit_free_modes; + + rates = kzalloc(sizeof(*rates) * spec->num_rates, GFP_KERNEL); + if (!rates) + goto exit_free_channels; + + /* + * Initialize Rate list. + */ + rt2x00lib_rate(&rates[0], 10, DEV_RATEMASK_1MB, + 0x00, IEEE80211_RATE_CCK); + rt2x00lib_rate(&rates[1], 20, DEV_RATEMASK_2MB, + 0x01, IEEE80211_RATE_CCK_2); + rt2x00lib_rate(&rates[2], 55, DEV_RATEMASK_5_5MB, + 0x02, IEEE80211_RATE_CCK_2); + rt2x00lib_rate(&rates[3], 110, DEV_RATEMASK_11MB, + 0x03, IEEE80211_RATE_CCK_2); + + if (spec->num_rates > 4) { + rt2x00lib_rate(&rates[4], 60, DEV_RATEMASK_6MB, + 0x0b, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[5], 90, DEV_RATEMASK_9MB, + 0x0f, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[6], 120, DEV_RATEMASK_12MB, + 0x0a, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[7], 180, DEV_RATEMASK_18MB, + 0x0e, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[8], 240, DEV_RATEMASK_24MB, + 0x09, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[9], 360, DEV_RATEMASK_36MB, + 0x0d, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[10], 480, DEV_RATEMASK_48MB, + 0x08, IEEE80211_RATE_OFDM); + rt2x00lib_rate(&rates[11], 540, DEV_RATEMASK_54MB, + 0x0c, IEEE80211_RATE_OFDM); + } + + /* + * Initialize Channel list. + */ + for (i = 0; i < spec->num_channels; i++) { + if (spec->channels[i].channel <= 14) + tx_power = spec->tx_power_bg[i]; + else if (spec->tx_power_a) + tx_power = spec->tx_power_a[i]; + else + tx_power = spec->tx_power_default; + + rt2x00lib_channel(&channels[i], + spec->channels[i].channel, tx_power, i); + } + + /* + * Intitialize 802.11b + * Rates: CCK. + * Channels: OFDM. + */ + if (spec->num_modes > HWMODE_B) { + hwmodes[HWMODE_B].mode = MODE_IEEE80211B; + hwmodes[HWMODE_B].num_channels = 14; + hwmodes[HWMODE_B].num_rates = 4; + hwmodes[HWMODE_B].channels = channels; + hwmodes[HWMODE_B].rates = rates; + } + + /* + * Intitialize 802.11g + * Rates: CCK, OFDM. + * Channels: OFDM. + */ + if (spec->num_modes > HWMODE_G) { + hwmodes[HWMODE_G].mode = MODE_IEEE80211G; + hwmodes[HWMODE_G].num_channels = 14; + hwmodes[HWMODE_G].num_rates = spec->num_rates; + hwmodes[HWMODE_G].channels = channels; + hwmodes[HWMODE_G].rates = rates; + } + + /* + * Intitialize 802.11a + * Rates: OFDM. + * Channels: OFDM, UNII, HiperLAN2. + */ + if (spec->num_modes > HWMODE_A) { + hwmodes[HWMODE_A].mode = MODE_IEEE80211A; + hwmodes[HWMODE_A].num_channels = spec->num_channels - 14; + hwmodes[HWMODE_A].num_rates = spec->num_rates - 4; + hwmodes[HWMODE_A].channels = &channels[14]; + hwmodes[HWMODE_A].rates = &rates[4]; + } + + if (spec->num_modes > HWMODE_G && + ieee80211_register_hwmode(hw, &hwmodes[HWMODE_G])) + goto exit_free_rates; + + if (spec->num_modes > HWMODE_B && + ieee80211_register_hwmode(hw, &hwmodes[HWMODE_B])) + goto exit_free_rates; + + if (spec->num_modes > HWMODE_A && + ieee80211_register_hwmode(hw, &hwmodes[HWMODE_A])) + goto exit_free_rates; + + rt2x00dev->hwmodes = hwmodes; + + return 0; + +exit_free_rates: + kfree(rates); + +exit_free_channels: + kfree(channels); + +exit_free_modes: + kfree(hwmodes); + +exit: + ERROR(rt2x00dev, "Allocation ieee80211 modes failed.\n"); + return -ENOMEM; +} + +static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev) +{ + if (test_bit(DEVICE_INITIALIZED_HW, &rt2x00dev->flags)) + ieee80211_unregister_hw(rt2x00dev->hw); + + if (likely(rt2x00dev->hwmodes)) { + kfree(rt2x00dev->hwmodes->channels); + kfree(rt2x00dev->hwmodes->rates); + kfree(rt2x00dev->hwmodes); + rt2x00dev->hwmodes = NULL; + } +} + +static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + struct hw_mode_spec *spec = &rt2x00dev->spec; + int status; + + /* + * Initialize HW modes. + */ + status = rt2x00lib_probe_hw_modes(rt2x00dev, spec); + if (status) + return status; + + /* + * Register HW. + */ + status = ieee80211_register_hw(rt2x00dev->hw); + if (status) { + rt2x00lib_remove_hw(rt2x00dev); + return status; + } + + __set_bit(DEVICE_INITIALIZED_HW, &rt2x00dev->flags); + + return 0; +} + +/* + * Initialization/uninitialization handlers. + */ +static int rt2x00lib_alloc_entries(struct data_ring *ring, + const u16 max_entries, const u16 data_size, + const u16 desc_size) +{ + struct data_entry *entry; + unsigned int i; + + ring->stats.limit = max_entries; + ring->data_size = data_size; + ring->desc_size = desc_size; + + /* + * Allocate all ring entries. + */ + entry = kzalloc(ring->stats.limit * sizeof(*entry), GFP_KERNEL); + if (!entry) + return -ENOMEM; + + for (i = 0; i < ring->stats.limit; i++) { + entry[i].flags = 0; + entry[i].ring = ring; + entry[i].skb = NULL; + } + + ring->entry = entry; + + return 0; +} + +static int rt2x00lib_alloc_ring_entries(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring; + + /* + * Allocate the RX ring. + */ + if (rt2x00lib_alloc_entries(rt2x00dev->rx, RX_ENTRIES, DATA_FRAME_SIZE, + rt2x00dev->ops->rxd_size)) + return -ENOMEM; + + /* + * First allocate the TX rings. + */ + txring_for_each(rt2x00dev, ring) { + if (rt2x00lib_alloc_entries(ring, TX_ENTRIES, DATA_FRAME_SIZE, + rt2x00dev->ops->txd_size)) + return -ENOMEM; + } + + if (!test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags)) + return 0; + + /* + * Allocate the BEACON ring. + */ + if (rt2x00lib_alloc_entries(&rt2x00dev->bcn[0], BEACON_ENTRIES, + MGMT_FRAME_SIZE, rt2x00dev->ops->txd_size)) + return -ENOMEM; + + /* + * Allocate the Atim ring. + */ + if (rt2x00lib_alloc_entries(&rt2x00dev->bcn[1], ATIM_ENTRIES, + DATA_FRAME_SIZE, rt2x00dev->ops->txd_size)) + return -ENOMEM; + + return 0; +} + +static void rt2x00lib_free_ring_entries(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring; + + ring_for_each(rt2x00dev, ring) { + kfree(ring->entry); + ring->entry = NULL; + } +} + +void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev) +{ + if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + return; + + /* + * Unregister rfkill. + */ + rt2x00rfkill_unregister(rt2x00dev); + + /* + * Allow the HW to uninitialize. + */ + rt2x00dev->ops->lib->uninitialize(rt2x00dev); + + /* + * Free allocated ring entries. + */ + rt2x00lib_free_ring_entries(rt2x00dev); +} + +int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) +{ + int status; + + if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + return 0; + + /* + * Allocate all ring entries. + */ + status = rt2x00lib_alloc_ring_entries(rt2x00dev); + if (status) { + ERROR(rt2x00dev, "Ring entries allocation failed.\n"); + return status; + } + + /* + * Initialize the device. + */ + status = rt2x00dev->ops->lib->initialize(rt2x00dev); + if (status) + goto exit; + + __set_bit(DEVICE_INITIALIZED, &rt2x00dev->flags); + + /* + * Register the rfkill handler. + */ + status = rt2x00rfkill_register(rt2x00dev); + if (status) + goto exit_unitialize; + + return 0; + +exit_unitialize: + rt2x00lib_uninitialize(rt2x00dev); + +exit: + rt2x00lib_free_ring_entries(rt2x00dev); + + return status; +} + +/* + * driver allocation handlers. + */ +static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring; + + /* + * We need the following rings: + * RX: 1 + * TX: hw->queues + * Beacon: 1 (if required) + * Atim: 1 (if required) + */ + rt2x00dev->data_rings = 1 + rt2x00dev->hw->queues + + (2 * test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags)); + + ring = kzalloc(rt2x00dev->data_rings * sizeof(*ring), GFP_KERNEL); + if (!ring) { + ERROR(rt2x00dev, "Ring allocation failed.\n"); + return -ENOMEM; + } + + /* + * Initialize pointers + */ + rt2x00dev->rx = ring; + rt2x00dev->tx = &rt2x00dev->rx[1]; + if (test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags)) + rt2x00dev->bcn = &rt2x00dev->tx[rt2x00dev->hw->queues]; + + /* + * Initialize ring parameters. + * cw_min: 2^5 = 32. + * cw_max: 2^10 = 1024. + */ + ring_for_each(rt2x00dev, ring) { + ring->rt2x00dev = rt2x00dev; + ring->tx_params.aifs = 2; + ring->tx_params.cw_min = 5; + ring->tx_params.cw_max = 10; + } + + return 0; +} + +static void rt2x00lib_free_rings(struct rt2x00_dev *rt2x00dev) +{ + kfree(rt2x00dev->rx); + rt2x00dev->rx = NULL; + rt2x00dev->tx = NULL; + rt2x00dev->bcn = NULL; +} + +int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) +{ + int retval = -ENOMEM; + + /* + * Let the driver probe the device to detect the capabilities. + */ + retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev); + if (retval) { + ERROR(rt2x00dev, "Failed to allocate device.\n"); + goto exit; + } + + /* + * Initialize configuration work. + */ + INIT_WORK(&rt2x00dev->beacon_work, rt2x00lib_beacondone_scheduled); + INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner); + + /* + * Reset current working type. + */ + rt2x00dev->interface.type = INVALID_INTERFACE; + + /* + * Allocate ring array. + */ + retval = rt2x00lib_alloc_rings(rt2x00dev); + if (retval) + goto exit; + + /* + * Initialize ieee80211 structure. + */ + retval = rt2x00lib_probe_hw(rt2x00dev); + if (retval) { + ERROR(rt2x00dev, "Failed to initialize hw.\n"); + goto exit; + } + + /* + * Allocatie rfkill. + */ + retval = rt2x00rfkill_allocate(rt2x00dev); + if (retval) + goto exit; + + /* + * Open the debugfs entry. + */ + rt2x00debug_register(rt2x00dev); + + return 0; + +exit: + rt2x00lib_remove_dev(rt2x00dev); + + return retval; +} +EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev); + +void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) +{ + /* + * Disable radio. + */ + rt2x00lib_disable_radio(rt2x00dev); + + /* + * Uninitialize device. + */ + rt2x00lib_uninitialize(rt2x00dev); + + /* + * Close debugfs entry. + */ + rt2x00debug_deregister(rt2x00dev); + + /* + * Free rfkill + */ + rt2x00rfkill_free(rt2x00dev); + + /* + * Free ieee80211_hw memory. + */ + rt2x00lib_remove_hw(rt2x00dev); + + /* + * Free firmware image. + */ + rt2x00lib_free_firmware(rt2x00dev); + + /* + * Free ring structures. + */ + rt2x00lib_free_rings(rt2x00dev); +} +EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev); + +/* + * Device state handlers + */ +#ifdef CONFIG_PM +int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) +{ + int retval; + + NOTICE(rt2x00dev, "Going to sleep.\n"); + + /* + * Disable radio and unitialize all items + * that must be recreated on resume. + */ + rt2x00lib_disable_radio(rt2x00dev); + rt2x00lib_uninitialize(rt2x00dev); + rt2x00debug_deregister(rt2x00dev); + + /* + * Set device mode to sleep for power management. + */ + retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP); + if (retval) + return retval; + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00lib_suspend); + +int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) +{ + struct interface *intf = &rt2x00dev->interface; + int retval; + + NOTICE(rt2x00dev, "Waking up.\n"); + __set_bit(INTERFACE_RESUME, &rt2x00dev->flags); + + /* + * Open the debugfs entry. + */ + rt2x00debug_register(rt2x00dev); + + /* + * Reinitialize device and all active interfaces. + */ + retval = rt2x00mac_start(rt2x00dev->hw); + if (retval) + goto exit; + + /* + * Reconfigure device. + */ + retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf); + if (retval) + goto exit; + + rt2x00lib_config_mac_addr(rt2x00dev, intf->mac); + rt2x00lib_config_bssid(rt2x00dev, intf->bssid); + rt2x00lib_config_type(rt2x00dev, intf->type); + rt2x00lib_config_packet_filter(rt2x00dev, intf->filter); + + /* + * When in Master or Ad-hoc mode, + * restart Beacon transmitting by faking a beacondone event. + */ + if (intf->type == IEEE80211_IF_TYPE_AP || + intf->type == IEEE80211_IF_TYPE_IBSS) + rt2x00lib_beacondone(rt2x00dev); + + __clear_bit(INTERFACE_RESUME, &rt2x00dev->flags); + + return 0; + +exit: + rt2x00lib_disable_radio(rt2x00dev); + rt2x00lib_uninitialize(rt2x00dev); + rt2x00debug_deregister(rt2x00dev); + + __clear_bit(INTERFACE_RESUME, &rt2x00dev->flags); + + return retval; +} +EXPORT_SYMBOL_GPL(rt2x00lib_resume); +#endif /* CONFIG_PM */ + +/* + * rt2x00lib module information. + */ +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("rt2x00 library"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c new file mode 100644 index 000000000000..236025f8b90f --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c @@ -0,0 +1,124 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 firmware loading routines. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt2x00lib" + +#include +#include +#include + +#include "rt2x00.h" +#include "rt2x00lib.h" + +static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev) +{ + struct device *device = wiphy_dev(rt2x00dev->hw->wiphy); + const struct firmware *fw; + char *fw_name; + int retval; + u16 crc; + u16 tmp; + + /* + * Read correct firmware from harddisk. + */ + fw_name = rt2x00dev->ops->lib->get_firmware_name(rt2x00dev); + if (!fw_name) { + ERROR(rt2x00dev, + "Invalid firmware filename.\n" + "Please file bug report to %s.\n", DRV_PROJECT); + return -EINVAL; + } + + INFO(rt2x00dev, "Loading firmware file '%s'.\n", fw_name); + + retval = request_firmware(&fw, fw_name, device); + if (retval) { + ERROR(rt2x00dev, "Failed to request Firmware.\n"); + return retval; + } + + if (!fw || !fw->size || !fw->data) { + ERROR(rt2x00dev, "Failed to read Firmware.\n"); + return -ENOENT; + } + + /* + * Validate the firmware using 16 bit CRC. + * The last 2 bytes of the firmware are the CRC + * so substract those 2 bytes from the CRC checksum, + * and set those 2 bytes to 0 when calculating CRC. + */ + tmp = 0; + crc = crc_itu_t(0, fw->data, fw->size - 2); + crc = crc_itu_t(crc, (u8 *)&tmp, 2); + + if (crc != (fw->data[fw->size - 2] << 8 | fw->data[fw->size - 1])) { + ERROR(rt2x00dev, "Firmware CRC error.\n"); + retval = -ENOENT; + goto exit; + } + + INFO(rt2x00dev, "Firmware detected - version: %d.%d.\n", + fw->data[fw->size - 4], fw->data[fw->size - 3]); + + rt2x00dev->fw = fw; + + return 0; + +exit: + release_firmware(fw); + + return retval; +} + +int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev) +{ + int retval; + + if (!rt2x00dev->fw) { + retval = rt2x00lib_request_firmware(rt2x00dev); + if (retval) + return retval; + } + + /* + * Send firmware to the device. + */ + retval = rt2x00dev->ops->lib->load_firmware(rt2x00dev, + rt2x00dev->fw->data, + rt2x00dev->fw->size); + return retval; +} + +void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev) +{ + release_firmware(rt2x00dev->fw); + rt2x00dev->fw = NULL; +} + diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h new file mode 100644 index 000000000000..3324090a96a7 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -0,0 +1,125 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: Data structures and definitions for the rt2x00lib module. + */ + +#ifndef RT2X00LIB_H +#define RT2X00LIB_H + +/* + * Interval defines + */ +#define LINK_TUNE_INTERVAL ( round_jiffies(HZ) ) +#define RFKILL_POLL_INTERVAL ( HZ / 4 ) + +/* + * Radio control handlers. + */ +int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev); +void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev); +void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, int enable); +void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev); + +/* + * Initialization handlers. + */ +int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev); +void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev); + +/* + * Configuration handlers. + */ +void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac); +void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid); +void rt2x00lib_config_packet_filter(struct rt2x00_dev *rt2x00dev, int filter); +void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, int type); +void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf); + +/* + * Firmware handlers. + */ +#ifdef CONFIG_RT2X00_LIB_FIRMWARE +int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev); +void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev); +#else +static inline int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev) +{ + return 0; +} +static inline void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev) +{ +} +#endif /* CONFIG_RT2X00_LIB_FIRMWARE */ + +/* + * Debugfs handlers. + */ +#ifdef CONFIG_RT2X00_LIB_DEBUGFS +void rt2x00debug_register(struct rt2x00_dev *rt2x00dev); +void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev); +#else +static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) +{ +} + +static inline void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev) +{ +} +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + +/* + * RFkill handlers. + */ +#ifdef CONFIG_RT2X00_LIB_RFKILL +int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev); +void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev); +int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev); +void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev); +#else +static inline int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) +{ + /* + * Force enable this flag, this will assure that + * devices with a hardware button but without rfkill support + * can still use their hardware. + */ + __set_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags); + + return 0; +} + +static inline void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) +{ +} + +static inline int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) +{ + return 0; +} + +static inline void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) +{ +} +#endif /* CONFIG_RT2X00_LIB_RFKILL */ + +#endif /* RT2X00LIB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c new file mode 100644 index 000000000000..778ed41e21ef --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -0,0 +1,459 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00mac + Abstract: rt2x00 generic mac80211 routines. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt2x00lib" + +#include +#include + +#include "rt2x00.h" +#include "rt2x00lib.h" + +static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, + struct data_ring *ring, + struct sk_buff *frag_skb, + struct ieee80211_tx_control *control) +{ + struct sk_buff *skb; + int size; + + if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) + size = sizeof(struct ieee80211_cts); + else + size = sizeof(struct ieee80211_rts); + + skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom); + if (!skb) { + WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n"); + return NETDEV_TX_BUSY; + } + + skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom); + skb_put(skb, size); + + if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) + ieee80211_ctstoself_get(rt2x00dev->hw, rt2x00dev->interface.id, + frag_skb->data, frag_skb->len, control, + (struct ieee80211_cts *)(skb->data)); + else + ieee80211_rts_get(rt2x00dev->hw, rt2x00dev->interface.id, + frag_skb->data, frag_skb->len, control, + (struct ieee80211_rts *)(skb->data)); + + if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control)) { + WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n"); + return NETDEV_TX_BUSY; + } + + return NETDEV_TX_OK; +} + +int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *control) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; + struct data_ring *ring; + u16 frame_control; + + /* + * Determine which ring to put packet on. + */ + ring = rt2x00lib_get_ring(rt2x00dev, control->queue); + if (unlikely(!ring)) { + ERROR(rt2x00dev, + "Attempt to send packet over invalid queue %d.\n" + "Please file bug report to %s.\n", + control->queue, DRV_PROJECT); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + /* + * If CTS/RTS is required. and this frame is not CTS or RTS, + * create and queue that frame first. But make sure we have + * at least enough entries available to send this CTS/RTS + * frame as well as the data frame. + */ + frame_control = le16_to_cpu(ieee80211hdr->frame_control); + if (!is_rts_frame(frame_control) && !is_cts_frame(frame_control) && + (control->flags & (IEEE80211_TXCTL_USE_RTS_CTS | + IEEE80211_TXCTL_USE_CTS_PROTECT))) { + if (rt2x00_ring_free(ring) <= 1) + return NETDEV_TX_BUSY; + + if (rt2x00mac_tx_rts_cts(rt2x00dev, ring, skb, control)) + return NETDEV_TX_BUSY; + } + + if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control)) + return NETDEV_TX_BUSY; + + if (rt2x00dev->ops->lib->kick_tx_queue) + rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); + + return NETDEV_TX_OK; +} +EXPORT_SYMBOL_GPL(rt2x00mac_tx); + +int rt2x00mac_start(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + int status; + + if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + return 0; + + /* + * If this is the first interface which is added, + * we should load the firmware now. + */ + if (test_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags)) { + status = rt2x00lib_load_firmware(rt2x00dev); + if (status) + return status; + } + + /* + * Initialize the device. + */ + status = rt2x00lib_initialize(rt2x00dev); + if (status) + return status; + + /* + * Enable radio. + */ + status = rt2x00lib_enable_radio(rt2x00dev); + if (status) { + rt2x00lib_uninitialize(rt2x00dev); + return status; + } + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00mac_start); + +void rt2x00mac_stop(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * Perhaps we can add something smarter here, + * but for now just disabling the radio should do. + */ + rt2x00lib_disable_radio(rt2x00dev); +} +EXPORT_SYMBOL_GPL(rt2x00mac_stop); + +int rt2x00mac_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct interface *intf = &rt2x00dev->interface; + int retval; + + /* + * We only support 1 non-monitor interface. + */ + if (conf->type != IEEE80211_IF_TYPE_MNTR && is_interface_present(intf)) + return -ENOBUFS; + + /* + * HACK: Placeholder until start/stop handler has been + * added to the mac80211 callback functions structure. + */ + retval = rt2x00mac_start(hw); + if (retval) + return retval; + + /* + * We support muliple monitor mode interfaces. + * All we need to do is increase the monitor_count. + */ + if (conf->type == IEEE80211_IF_TYPE_MNTR) { + intf->monitor_count++; + } else { + intf->id = conf->if_id; + intf->type = conf->type; + if (conf->type == IEEE80211_IF_TYPE_AP) + memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN); + memcpy(&intf->mac, conf->mac_addr, ETH_ALEN); + intf->filter = 0; + } + + /* + * Configure interface. + * The MAC adddress must be configured after the device + * has been initialized. Else the device can reset the + * MAC registers. + */ + rt2x00lib_config_mac_addr(rt2x00dev, intf->mac); + rt2x00lib_config_type(rt2x00dev, conf->type); + rt2x00lib_config_packet_filter(rt2x00dev, intf->filter); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00mac_add_interface); + +void rt2x00mac_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct interface *intf = &rt2x00dev->interface; + + /* + * We only support 1 non-monitor interface. + */ + if (conf->type != IEEE80211_IF_TYPE_MNTR && !is_interface_present(intf)) + return; + + /* + * When removing an monitor interface, decrease monitor_count. + * For non-monitor interfaces, all interface data needs to be reset. + */ + if (conf->type == IEEE80211_IF_TYPE_MNTR) { + intf->monitor_count--; + } else if (intf->type == conf->type) { + intf->id = 0; + intf->type = INVALID_INTERFACE; + memset(&intf->bssid, 0x00, ETH_ALEN); + memset(&intf->mac, 0x00, ETH_ALEN); + intf->filter = 0; + } + + /* + * Make sure the bssid and mac address registers + * are cleared to prevent false ACKing of frames. + */ + rt2x00lib_config_mac_addr(rt2x00dev, intf->mac); + rt2x00lib_config_bssid(rt2x00dev, intf->bssid); + rt2x00lib_config_type(rt2x00dev, intf->type); + + /* + * HACK: Placeholder untill start/stop handler has been + * added to the mac80211 callback functions structure. + */ + rt2x00mac_stop(hw); +} +EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface); + +int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * If the device is not initialized we shouldn't accept + * any configuration changes. Mac80211 might be calling + * this function while we are trying to remove the device + * or perhaps suspending it. + */ + if (!test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + return 0; + + /* + * Check if we need to disable the radio, + * if this is not the case, at least the RX must be disabled. + */ + if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) { + if (!conf->radio_enabled) + rt2x00lib_disable_radio(rt2x00dev); + else + rt2x00lib_toggle_rx(rt2x00dev, 0); + } + + rt2x00lib_config(rt2x00dev, conf); + + /* + * If promisc mode cannot be configured in irq context, + * then it is now the time to configure it. + */ + if (test_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags)) + rt2x00lib_config_packet_filter(rt2x00dev, + rt2x00dev->interface.filter); + + /* + * Reenable RX only if the radio should be on. + */ + if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + rt2x00lib_toggle_rx(rt2x00dev, 1); + else if (conf->radio_enabled) + return rt2x00lib_enable_radio(rt2x00dev); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00mac_config); + +int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id, + struct ieee80211_if_conf *conf) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct interface *intf = &rt2x00dev->interface; + int status; + + /* + * If the device is not initialized we shouldn't accept + * any configuration changes. Mac80211 might be calling + * this function while we are trying to remove the device + * or perhaps suspending it. + */ + if (!test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + return 0; + + /* + * Monitor mode does not need configuring. + * If the given type does not match the configured type, + * there has been a problem. + */ + if (conf->type == IEEE80211_IF_TYPE_MNTR) + return 0; + else if (conf->type != intf->type) + return -EINVAL; + + /* + * If the interface does not work in master mode, + * then the bssid value in the interface structure + * should now be set. + */ + if (conf->type != IEEE80211_IF_TYPE_AP) + memcpy(&intf->bssid, conf->bssid, ETH_ALEN); + rt2x00lib_config_bssid(rt2x00dev, intf->bssid); + + /* + * We only need to initialize the beacon when master mode is enabled. + */ + if (conf->type != IEEE80211_IF_TYPE_AP || !conf->beacon) + return 0; + + status = rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, + conf->beacon, + conf->beacon_control); + if (status) + dev_kfree_skb(conf->beacon); + + return status; +} +EXPORT_SYMBOL_GPL(rt2x00mac_config_interface); + +void rt2x00mac_set_multicast_list(struct ieee80211_hw *hw, + unsigned short flags, int mc_count) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * Check if the new state is different then the old state. + */ + if (rt2x00dev->interface.filter == flags) + return; + + rt2x00dev->interface.filter = flags; + + /* + * Raise the pending bit to indicate the + * packet filter should be updated. + */ + __set_bit(PACKET_FILTER_PENDING, &rt2x00dev->flags); + + /* + * Check if Packet filter actions are allowed in + * atomic context. If not, raise the pending flag and + * let it be. + */ + if (!test_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags) || + !in_atomic()) + rt2x00lib_config_packet_filter(rt2x00dev, flags); +} +EXPORT_SYMBOL_GPL(rt2x00mac_set_multicast_list); + +int rt2x00mac_get_stats(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * The dot11ACKFailureCount, dot11RTSFailureCount and + * dot11RTSSuccessCount are updated in interrupt time. + * dot11FCSErrorCount is updated in the link tuner. + */ + memcpy(stats, &rt2x00dev->low_level_stats, sizeof(*stats)); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00mac_get_stats); + +int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw, + struct ieee80211_tx_queue_stats *stats) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + unsigned int i; + + for (i = 0; i < hw->queues; i++) + memcpy(&stats->data[i], &rt2x00dev->tx[i].stats, + sizeof(rt2x00dev->tx[i].stats)); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00mac_get_tx_stats); + +int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue, + const struct ieee80211_tx_queue_params *params) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct data_ring *ring; + + ring = rt2x00lib_get_ring(rt2x00dev, queue); + if (unlikely(!ring)) + return -EINVAL; + + /* + * The passed variables are stored as real value ((2^n)-1). + * Ralink registers require to know the bit number 'n'. + */ + if (params->cw_min) + ring->tx_params.cw_min = fls(params->cw_min); + else + ring->tx_params.cw_min = 5; /* cw_min: 2^5 = 32. */ + + if (params->cw_max) + ring->tx_params.cw_max = fls(params->cw_max); + else + ring->tx_params.cw_max = 10; /* cw_min: 2^10 = 1024. */ + + if (params->aifs) + ring->tx_params.aifs = params->aifs; + else + ring->tx_params.aifs = 2; + + INFO(rt2x00dev, + "Configured TX ring %d - CWmin: %d, CWmax: %d, Aifs: %d.\n", + queue, ring->tx_params.cw_min, ring->tx_params.cw_max, + ring->tx_params.aifs); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00mac_conf_tx); diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c new file mode 100644 index 000000000000..85629f1999ab --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -0,0 +1,481 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00pci + Abstract: rt2x00 generic pci device routines. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt2x00pci" + +#include +#include +#include +#include + +#include "rt2x00.h" +#include "rt2x00pci.h" + +/* + * Beacon handlers. + */ +int rt2x00pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *control) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct data_ring *ring = + rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + struct data_entry *entry = rt2x00_get_data_entry(ring); + + /* + * Just in case mac80211 doesn't set this correctly, + * but we need this queue set for the descriptor + * initialization. + */ + control->queue = IEEE80211_TX_QUEUE_BEACON; + + /* + * Update the beacon entry. + */ + memcpy(entry->data_addr, skb->data, skb->len); + rt2x00lib_write_tx_desc(rt2x00dev, entry->priv, + (struct ieee80211_hdr *)skb->data, + skb->len, control); + + /* + * Enable beacon generation. + */ + rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00pci_beacon_update); + +/* + * TX data handlers. + */ +int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev, + struct data_ring *ring, struct sk_buff *skb, + struct ieee80211_tx_control *control) +{ + struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; + struct data_entry *entry = rt2x00_get_data_entry(ring); + struct data_desc *txd = entry->priv; + u32 word; + + if (rt2x00_ring_full(ring)) { + ieee80211_stop_queue(rt2x00dev->hw, control->queue); + return -EINVAL; + } + + rt2x00_desc_read(txd, 0, &word); + + if (rt2x00_get_field32(word, TXD_ENTRY_OWNER_NIC) || + rt2x00_get_field32(word, TXD_ENTRY_VALID)) { + ERROR(rt2x00dev, + "Arrived at non-free entry in the non-full queue %d.\n" + "Please file bug report to %s.\n", + control->queue, DRV_PROJECT); + ieee80211_stop_queue(rt2x00dev->hw, control->queue); + return -EINVAL; + } + + entry->skb = skb; + memcpy(&entry->tx_status.control, control, sizeof(*control)); + memcpy(entry->data_addr, skb->data, skb->len); + rt2x00lib_write_tx_desc(rt2x00dev, txd, ieee80211hdr, + skb->len, control); + + rt2x00_ring_index_inc(ring); + + if (rt2x00_ring_full(ring)) + ieee80211_stop_queue(rt2x00dev->hw, control->queue); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00pci_write_tx_data); + +/* + * RX data handlers. + */ +void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring = rt2x00dev->rx; + struct data_entry *entry; + struct data_desc *rxd; + struct sk_buff *skb; + u32 desc; + int retval; + int signal; + int rssi; + int ofdm; + int size; + + while (1) { + entry = rt2x00_get_data_entry(ring); + rxd = entry->priv; + rt2x00_desc_read(rxd, 0, &desc); + + if (rt2x00_get_field32(desc, RXD_ENTRY_OWNER_NIC)) + break; + + retval = rt2x00dev->ops->lib->fill_rxdone(entry, &signal, + &rssi, &ofdm, &size); + if (retval) + goto skip_entry; + + /* + * Allocate the sk_buffer, initialize it and copy + * all data into it. + */ + skb = dev_alloc_skb(size + NET_IP_ALIGN); + if (!skb) + return; + + skb_reserve(skb, NET_IP_ALIGN); + skb_put(skb, size); + memcpy(skb->data, entry->data_addr, size); + + /* + * Send the frame to rt2x00lib for further processing. + */ + rt2x00lib_rxdone(entry, skb, signal, rssi, ofdm); + +skip_entry: + if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) { + rt2x00_set_field32(&desc, RXD_ENTRY_OWNER_NIC, 1); + rt2x00_desc_write(rxd, 0, desc); + } + + rt2x00_ring_index_inc(ring); + } +} +EXPORT_SYMBOL_GPL(rt2x00pci_rxdone); + +/* + * Device initialization handlers. + */ +#define priv_offset(__ring, __i) \ +({ \ + ring->data_addr + (i * ring->desc_size); \ +}) + +#define data_addr_offset(__ring, __i) \ +({ \ + (__ring)->data_addr + \ + ((__ring)->stats.limit * (__ring)->desc_size) + \ + ((__i) * (__ring)->data_size); \ +}) + +#define data_dma_offset(__ring, __i) \ +({ \ + (__ring)->data_dma + \ + ((__ring)->stats.limit * (__ring)->desc_size) + \ + ((__i) * (__ring)->data_size); \ +}) + +static int rt2x00pci_alloc_dma(struct rt2x00_dev *rt2x00dev, + struct data_ring *ring) +{ + unsigned int i; + + /* + * Allocate DMA memory for descriptor and buffer. + */ + ring->data_addr = pci_alloc_consistent(rt2x00dev_pci(rt2x00dev), + rt2x00_get_ring_size(ring), + &ring->data_dma); + if (!ring->data_addr) + return -ENOMEM; + + /* + * Initialize all ring entries to contain valid + * addresses. + */ + for (i = 0; i < ring->stats.limit; i++) { + ring->entry[i].priv = priv_offset(ring, i); + ring->entry[i].data_addr = data_addr_offset(ring, i); + ring->entry[i].data_dma = data_dma_offset(ring, i); + } + + return 0; +} + +static void rt2x00pci_free_dma(struct rt2x00_dev *rt2x00dev, + struct data_ring *ring) +{ + if (ring->data_addr) + pci_free_consistent(rt2x00dev_pci(rt2x00dev), + rt2x00_get_ring_size(ring), + ring->data_addr, ring->data_dma); + ring->data_addr = NULL; +} + +int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev) +{ + struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); + struct data_ring *ring; + int status; + + /* + * Allocate DMA + */ + ring_for_each(rt2x00dev, ring) { + status = rt2x00pci_alloc_dma(rt2x00dev, ring); + if (status) + goto exit; + } + + /* + * Register interrupt handler. + */ + status = request_irq(pci_dev->irq, rt2x00dev->ops->lib->irq_handler, + IRQF_SHARED, pci_name(pci_dev), rt2x00dev); + if (status) { + ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n", + pci_dev->irq, status); + return status; + } + + return 0; + +exit: + rt2x00pci_uninitialize(rt2x00dev); + + return status; +} +EXPORT_SYMBOL_GPL(rt2x00pci_initialize); + +void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring; + + /* + * Free irq line. + */ + free_irq(rt2x00dev_pci(rt2x00dev)->irq, rt2x00dev); + + /* + * Free DMA + */ + ring_for_each(rt2x00dev, ring) + rt2x00pci_free_dma(rt2x00dev, ring); +} +EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize); + +/* + * PCI driver handlers. + */ +static void rt2x00pci_free_reg(struct rt2x00_dev *rt2x00dev) +{ + kfree(rt2x00dev->rf); + rt2x00dev->rf = NULL; + + kfree(rt2x00dev->eeprom); + rt2x00dev->eeprom = NULL; + + if (rt2x00dev->csr_addr) { + iounmap(rt2x00dev->csr_addr); + rt2x00dev->csr_addr = NULL; + } +} + +static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev) +{ + struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); + + rt2x00dev->csr_addr = ioremap(pci_resource_start(pci_dev, 0), + pci_resource_len(pci_dev, 0)); + if (!rt2x00dev->csr_addr) + goto exit; + + rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); + if (!rt2x00dev->eeprom) + goto exit; + + rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); + if (!rt2x00dev->rf) + goto exit; + + return 0; + +exit: + ERROR_PROBE("Failed to allocate registers.\n"); + + rt2x00pci_free_reg(rt2x00dev); + + return -ENOMEM; +} + +int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) +{ + struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_data; + struct ieee80211_hw *hw; + struct rt2x00_dev *rt2x00dev; + int retval; + + retval = pci_request_regions(pci_dev, pci_name(pci_dev)); + if (retval) { + ERROR_PROBE("PCI request regions failed.\n"); + return retval; + } + + retval = pci_enable_device(pci_dev); + if (retval) { + ERROR_PROBE("Enable device failed.\n"); + goto exit_release_regions; + } + + pci_set_master(pci_dev); + + if (pci_set_mwi(pci_dev)) + ERROR_PROBE("MWI not available.\n"); + + if (pci_set_dma_mask(pci_dev, DMA_64BIT_MASK) && + pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { + ERROR_PROBE("PCI DMA not supported.\n"); + retval = -EIO; + goto exit_disable_device; + } + + hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); + if (!hw) { + ERROR_PROBE("Failed to allocate hardware.\n"); + retval = -ENOMEM; + goto exit_disable_device; + } + + pci_set_drvdata(pci_dev, hw); + + rt2x00dev = hw->priv; + rt2x00dev->dev = pci_dev; + rt2x00dev->ops = ops; + rt2x00dev->hw = hw; + + retval = rt2x00pci_alloc_reg(rt2x00dev); + if (retval) + goto exit_free_device; + + retval = rt2x00lib_probe_dev(rt2x00dev); + if (retval) + goto exit_free_reg; + + return 0; + +exit_free_reg: + rt2x00pci_free_reg(rt2x00dev); + +exit_free_device: + ieee80211_free_hw(hw); + +exit_disable_device: + if (retval != -EBUSY) + pci_disable_device(pci_dev); + +exit_release_regions: + pci_release_regions(pci_dev); + + pci_set_drvdata(pci_dev, NULL); + + return retval; +} +EXPORT_SYMBOL_GPL(rt2x00pci_probe); + +void rt2x00pci_remove(struct pci_dev *pci_dev) +{ + struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * Free all allocated data. + */ + rt2x00lib_remove_dev(rt2x00dev); + rt2x00pci_free_reg(rt2x00dev); + ieee80211_free_hw(hw); + + /* + * Free the PCI device data. + */ + pci_set_drvdata(pci_dev, NULL); + pci_disable_device(pci_dev); + pci_release_regions(pci_dev); +} +EXPORT_SYMBOL_GPL(rt2x00pci_remove); + +#ifdef CONFIG_PM +int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state) +{ + struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); + struct rt2x00_dev *rt2x00dev = hw->priv; + int retval; + + retval = rt2x00lib_suspend(rt2x00dev, state); + if (retval) + return retval; + + rt2x00pci_free_reg(rt2x00dev); + + pci_save_state(pci_dev); + pci_disable_device(pci_dev); + return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); +} +EXPORT_SYMBOL_GPL(rt2x00pci_suspend); + +int rt2x00pci_resume(struct pci_dev *pci_dev) +{ + struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); + struct rt2x00_dev *rt2x00dev = hw->priv; + int retval; + + if (pci_set_power_state(pci_dev, PCI_D0) || + pci_enable_device(pci_dev) || + pci_restore_state(pci_dev)) { + ERROR(rt2x00dev, "Failed to resume device.\n"); + return -EIO; + } + + retval = rt2x00pci_alloc_reg(rt2x00dev); + if (retval) + return retval; + + retval = rt2x00lib_resume(rt2x00dev); + if (retval) + goto exit_free_reg; + + return 0; + +exit_free_reg: + rt2x00pci_free_reg(rt2x00dev); + + return retval; +} +EXPORT_SYMBOL_GPL(rt2x00pci_resume); +#endif /* CONFIG_PM */ + +/* + * rt2x00pci module information. + */ +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("rt2x00 library"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h new file mode 100644 index 000000000000..82adeac061d0 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -0,0 +1,127 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00pci + Abstract: Data structures for the rt2x00pci module. + */ + +#ifndef RT2X00PCI_H +#define RT2X00PCI_H + +#include + +/* + * This variable should be used with the + * pci_driver structure initialization. + */ +#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops) + +/* + * Register defines. + * Some registers require multiple attempts before success, + * in those cases REGISTER_BUSY_COUNT attempts should be + * taken with a REGISTER_BUSY_DELAY interval. + */ +#define REGISTER_BUSY_COUNT 5 +#define REGISTER_BUSY_DELAY 100 + +/* + * Descriptor availability flags. + * All PCI device descriptors have these 2 flags + * with the exact same definition. + * By storing them here we can use them inside rt2x00pci + * for some simple entry availability checking. + */ +#define TXD_ENTRY_OWNER_NIC FIELD32(0x00000001) +#define TXD_ENTRY_VALID FIELD32(0x00000002) +#define RXD_ENTRY_OWNER_NIC FIELD32(0x00000001) + +/* + * Register access. + */ +static inline void rt2x00pci_register_read(const struct rt2x00_dev *rt2x00dev, + const unsigned long offset, + u32 *value) +{ + *value = readl(rt2x00dev->csr_addr + offset); +} + +static inline void +rt2x00pci_register_multiread(const struct rt2x00_dev *rt2x00dev, + const unsigned long offset, + void *value, const u16 length) +{ + memcpy_fromio(value, rt2x00dev->csr_addr + offset, length); +} + +static inline void rt2x00pci_register_write(const struct rt2x00_dev *rt2x00dev, + const unsigned long offset, + u32 value) +{ + writel(value, rt2x00dev->csr_addr + offset); +} + +static inline void +rt2x00pci_register_multiwrite(const struct rt2x00_dev *rt2x00dev, + const unsigned long offset, + void *value, const u16 length) +{ + memcpy_toio(rt2x00dev->csr_addr + offset, value, length); +} + +/* + * Beacon handlers. + */ +int rt2x00pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *control); + +/* + * TX data handlers. + */ +int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev, + struct data_ring *ring, struct sk_buff *skb, + struct ieee80211_tx_control *control); + +/* + * RX data handlers. + */ +void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev); + +/* + * Device initialization handlers. + */ +int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev); +void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev); + +/* + * PCI driver handlers. + */ +int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id); +void rt2x00pci_remove(struct pci_dev *pci_dev); +#ifdef CONFIG_PM +int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state); +int rt2x00pci_resume(struct pci_dev *pci_dev); +#else +#define rt2x00pci_suspend NULL +#define rt2x00pci_resume NULL +#endif /* CONFIG_PM */ + +#endif /* RT2X00PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h new file mode 100644 index 000000000000..7927d5f7bcc7 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -0,0 +1,283 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00 + Abstract: rt2x00 generic register information. + */ + +#ifndef RT2X00REG_H +#define RT2X00REG_H + +/* + * TX result flags. + */ +enum TX_STATUS { + TX_SUCCESS = 0, + TX_SUCCESS_RETRY = 1, + TX_FAIL_RETRY = 2, + TX_FAIL_INVALID = 3, + TX_FAIL_OTHER = 4, +}; + +/* + * Antenna values + */ +enum antenna { + ANTENNA_SW_DIVERSITY = 0, + ANTENNA_A = 1, + ANTENNA_B = 2, + ANTENNA_HW_DIVERSITY = 3, +}; + +/* + * Led mode values. + */ +enum led_mode { + LED_MODE_DEFAULT = 0, + LED_MODE_TXRX_ACTIVITY = 1, + LED_MODE_SIGNAL_STRENGTH = 2, + LED_MODE_ASUS = 3, + LED_MODE_ALPHA = 4, +}; + +/* + * Device states + */ +enum dev_state { + STATE_DEEP_SLEEP = 0, + STATE_SLEEP = 1, + STATE_STANDBY = 2, + STATE_AWAKE = 3, + +/* + * Additional device states, these values are + * not strict since they are not directly passed + * into the device. + */ + STATE_RADIO_ON, + STATE_RADIO_OFF, + STATE_RADIO_RX_ON, + STATE_RADIO_RX_OFF, + STATE_RADIO_IRQ_ON, + STATE_RADIO_IRQ_OFF, +}; + +/* + * IFS backoff values + */ +enum ifs { + IFS_BACKOFF = 0, + IFS_SIFS = 1, + IFS_NEW_BACKOFF = 2, + IFS_NONE = 3, +}; + +/* + * Cipher types for hardware encryption + */ +enum cipher { + CIPHER_NONE = 0, + CIPHER_WEP64 = 1, + CIPHER_WEP128 = 2, + CIPHER_TKIP = 3, + CIPHER_AES = 4, +/* + * The following fields were added by rt61pci and rt73usb. + */ + CIPHER_CKIP64 = 5, + CIPHER_CKIP128 = 6, + CIPHER_TKIP_NO_MIC = 7, +}; + +/* + * Register handlers. + * We store the position of a register field inside a field structure, + * This will simplify the process of setting and reading a certain field + * inside the register while making sure the process remains byte order safe. + */ +struct rt2x00_field8 { + u8 bit_offset; + u8 bit_mask; +}; + +struct rt2x00_field16 { + u16 bit_offset; + u16 bit_mask; +}; + +struct rt2x00_field32 { + u32 bit_offset; + u32 bit_mask; +}; + +/* + * Power of two check, this will check + * if the mask that has been given contains + * and contiguous set of bits. + */ +#define is_power_of_two(x) ( !((x) & ((x)-1)) ) +#define low_bit_mask(x) ( ((x)-1) & ~(x) ) +#define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x)) + +#define FIELD8(__mask) \ +({ \ + BUILD_BUG_ON(!(__mask) || \ + !is_valid_mask(__mask) || \ + (__mask) != (u8)(__mask)); \ + (struct rt2x00_field8) { \ + __ffs(__mask), (__mask) \ + }; \ +}) + +#define FIELD16(__mask) \ +({ \ + BUILD_BUG_ON(!(__mask) || \ + !is_valid_mask(__mask) || \ + (__mask) != (u16)(__mask));\ + (struct rt2x00_field16) { \ + __ffs(__mask), (__mask) \ + }; \ +}) + +#define FIELD32(__mask) \ +({ \ + BUILD_BUG_ON(!(__mask) || \ + !is_valid_mask(__mask) || \ + (__mask) != (u32)(__mask));\ + (struct rt2x00_field32) { \ + __ffs(__mask), (__mask) \ + }; \ +}) + +static inline void rt2x00_set_field32(u32 *reg, + const struct rt2x00_field32 field, + const u32 value) +{ + *reg &= ~(field.bit_mask); + *reg |= (value << field.bit_offset) & field.bit_mask; +} + +static inline u32 rt2x00_get_field32(const u32 reg, + const struct rt2x00_field32 field) +{ + return (reg & field.bit_mask) >> field.bit_offset; +} + +static inline void rt2x00_set_field16(u16 *reg, + const struct rt2x00_field16 field, + const u16 value) +{ + *reg &= ~(field.bit_mask); + *reg |= (value << field.bit_offset) & field.bit_mask; +} + +static inline u16 rt2x00_get_field16(const u16 reg, + const struct rt2x00_field16 field) +{ + return (reg & field.bit_mask) >> field.bit_offset; +} + +static inline void rt2x00_set_field8(u8 *reg, + const struct rt2x00_field8 field, + const u8 value) +{ + *reg &= ~(field.bit_mask); + *reg |= (value << field.bit_offset) & field.bit_mask; +} + +static inline u8 rt2x00_get_field8(const u8 reg, + const struct rt2x00_field8 field) +{ + return (reg & field.bit_mask) >> field.bit_offset; +} + +/* + * Device specific rate value. + * We will have to create the device specific rate value + * passed to the ieee80211 kernel. We need to make it a consist of + * multiple fields because we want to store more then 1 device specific + * values inside the value. + * 1 - rate, stored as 100 kbit/s. + * 2 - preamble, short_preamble enabled flag. + * 3 - MASK_RATE, which rates are enabled in this mode, this mask + * corresponds with the TX register format for the current device. + * 4 - plcp, 802.11b rates are device specific, + * 802.11g rates are set according to the ieee802.11a-1999 p.14. + * The bit to enable preamble is set in a seperate define. + */ +#define DEV_RATE FIELD32(0x000007ff) +#define DEV_PREAMBLE FIELD32(0x00000800) +#define DEV_RATEMASK FIELD32(0x00fff000) +#define DEV_PLCP FIELD32(0xff000000) + +/* + * Bitfields + */ +#define DEV_RATEBIT_1MB ( 1 << 0 ) +#define DEV_RATEBIT_2MB ( 1 << 1 ) +#define DEV_RATEBIT_5_5MB ( 1 << 2 ) +#define DEV_RATEBIT_11MB ( 1 << 3 ) +#define DEV_RATEBIT_6MB ( 1 << 4 ) +#define DEV_RATEBIT_9MB ( 1 << 5 ) +#define DEV_RATEBIT_12MB ( 1 << 6 ) +#define DEV_RATEBIT_18MB ( 1 << 7 ) +#define DEV_RATEBIT_24MB ( 1 << 8 ) +#define DEV_RATEBIT_36MB ( 1 << 9 ) +#define DEV_RATEBIT_48MB ( 1 << 10 ) +#define DEV_RATEBIT_54MB ( 1 << 11 ) + +/* + * Bitmasks for DEV_RATEMASK + */ +#define DEV_RATEMASK_1MB ( (DEV_RATEBIT_1MB << 1) -1 ) +#define DEV_RATEMASK_2MB ( (DEV_RATEBIT_2MB << 1) -1 ) +#define DEV_RATEMASK_5_5MB ( (DEV_RATEBIT_5_5MB << 1) -1 ) +#define DEV_RATEMASK_11MB ( (DEV_RATEBIT_11MB << 1) -1 ) +#define DEV_RATEMASK_6MB ( (DEV_RATEBIT_6MB << 1) -1 ) +#define DEV_RATEMASK_9MB ( (DEV_RATEBIT_9MB << 1) -1 ) +#define DEV_RATEMASK_12MB ( (DEV_RATEBIT_12MB << 1) -1 ) +#define DEV_RATEMASK_18MB ( (DEV_RATEBIT_18MB << 1) -1 ) +#define DEV_RATEMASK_24MB ( (DEV_RATEBIT_24MB << 1) -1 ) +#define DEV_RATEMASK_36MB ( (DEV_RATEBIT_36MB << 1) -1 ) +#define DEV_RATEMASK_48MB ( (DEV_RATEBIT_48MB << 1) -1 ) +#define DEV_RATEMASK_54MB ( (DEV_RATEBIT_54MB << 1) -1 ) + +/* + * Bitmask groups of bitrates + */ +#define DEV_BASIC_RATEMASK \ + ( DEV_RATEMASK_11MB | \ + DEV_RATEBIT_6MB | DEV_RATEBIT_12MB | DEV_RATEBIT_24MB ) + +#define DEV_CCK_RATEMASK ( DEV_RATEMASK_11MB ) +#define DEV_OFDM_RATEMASK ( DEV_RATEMASK_54MB & ~DEV_CCK_RATEMASK ) + +/* + * Macro's to set and get specific fields from the device specific val and val2 + * fields inside the ieee80211_rate entry. + */ +#define DEVICE_SET_RATE_FIELD(__value, __mask) \ + (int)( ((__value) << DEV_##__mask.bit_offset) & DEV_##__mask.bit_mask ) + +#define DEVICE_GET_RATE_FIELD(__value, __mask) \ + (int)( ((__value) & DEV_##__mask.bit_mask) >> DEV_##__mask.bit_offset ) + +#endif /* RT2X00REG_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c new file mode 100644 index 000000000000..dc5b696f4751 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c @@ -0,0 +1,148 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00rfkill + Abstract: rt2x00 rfkill routines. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt2x00lib" + +#include +#include +#include +#include + +#include "rt2x00.h" +#include "rt2x00lib.h" + +static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state) +{ + struct rt2x00_dev *rt2x00dev = data; + int retval = 0; + + if (unlikely(!rt2x00dev)) + return 0; + + /* + * Only continue if we have an active interface, + * either monitor or non-monitor should be present. + */ + if (!is_interface_present(&rt2x00dev->interface) && + !is_monitor_present(&rt2x00dev->interface)) + return 0; + + if (state == RFKILL_STATE_ON) { + INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n"); + __set_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags); + retval = rt2x00lib_enable_radio(rt2x00dev); + } else if (state == RFKILL_STATE_OFF) { + INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n"); + __clear_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags); + rt2x00lib_disable_radio(rt2x00dev); + } + + return retval; +} + +static void rt2x00rfkill_poll(struct input_polled_dev *poll_dev) +{ + struct rt2x00_dev *rt2x00dev = poll_dev->private; + int state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev); + + if (rt2x00dev->rfkill->state != state) + input_report_key(poll_dev->input, KEY_WLAN, 1); +} + +int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) +{ + int retval; + + if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) + return 0; + + retval = rfkill_register(rt2x00dev->rfkill); + if (retval) { + ERROR(rt2x00dev, "Failed to register rfkill handler.\n"); + return retval; + } + + retval = input_register_polled_device(rt2x00dev->poll_dev); + if (retval) { + ERROR(rt2x00dev, "Failed to register polled device.\n"); + rfkill_unregister(rt2x00dev->rfkill); + return retval; + } + + return 0; +} + +void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) +{ + if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) + return; + + input_unregister_polled_device(rt2x00dev->poll_dev); + rfkill_unregister(rt2x00dev->rfkill); +} + +int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) +{ + struct device *device = wiphy_dev(rt2x00dev->hw->wiphy); + + if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) + return 0; + + rt2x00dev->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN); + if (!rt2x00dev->rfkill) { + ERROR(rt2x00dev, "Failed to allocate rfkill handler.\n"); + return -ENOMEM; + } + + rt2x00dev->rfkill->name = rt2x00dev->ops->name; + rt2x00dev->rfkill->data = rt2x00dev; + rt2x00dev->rfkill->state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev); + rt2x00dev->rfkill->toggle_radio = rt2x00rfkill_toggle_radio; + + rt2x00dev->poll_dev = input_allocate_polled_device(); + if (!rt2x00dev->poll_dev) { + ERROR(rt2x00dev, "Failed to allocate polled device.\n"); + rfkill_free(rt2x00dev->rfkill); + return -ENOMEM; + } + + rt2x00dev->poll_dev->private = rt2x00dev; + rt2x00dev->poll_dev->poll = rt2x00rfkill_poll; + rt2x00dev->poll_dev->poll_interval = RFKILL_POLL_INTERVAL; + + return 0; +} + +void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) +{ + if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) + return; + + input_free_polled_device(rt2x00dev->poll_dev); + rfkill_free(rt2x00dev->rfkill); +} diff --git a/drivers/net/wireless/rt2x00/rt2x00ring.h b/drivers/net/wireless/rt2x00/rt2x00ring.h new file mode 100644 index 000000000000..122c75248e74 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00ring.h @@ -0,0 +1,255 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00 + Abstract: rt2x00 ring datastructures and routines + */ + +#ifndef RT2X00RING_H +#define RT2X00RING_H + +/* + * data_desc + * Each data entry also contains a descriptor which is used by the + * device to determine what should be done with the packet and + * what the current status is. + * This structure is greatly simplified, but the descriptors + * are basically a list of little endian 32 bit values. + * Make the array by default 1 word big, this will allow us + * to use sizeof() correctly. + */ +struct data_desc { + __le32 word[1]; +}; + +/* + * data_entry_desc + * Summary of information that should be written into the + * descriptor for sending a TX frame. + */ +struct data_entry_desc { + unsigned long flags; +#define ENTRY_TXDONE 1 +#define ENTRY_TXD_RTS_FRAME 2 +#define ENTRY_TXD_OFDM_RATE 3 +#define ENTRY_TXD_MORE_FRAG 4 +#define ENTRY_TXD_REQ_TIMESTAMP 5 +#define ENTRY_TXD_BURST 6 + +/* + * Queue ID. ID's 0-4 are data TX rings + */ + int queue; +#define QUEUE_MGMT 13 +#define QUEUE_RX 14 +#define QUEUE_OTHER 15 + + /* + * PLCP values. + */ + u16 length_high; + u16 length_low; + u16 signal; + u16 service; + + /* + * Timing information + */ + int aifs; + int ifs; + int cw_min; + int cw_max; +}; + +/* + * data_entry + * The data ring is a list of data entries. + * Each entry holds a reference to the descriptor + * and the data buffer. For TX rings the reference to the + * sk_buff of the packet being transmitted is also stored here. + */ +struct data_entry { + /* + * Status flags + */ + unsigned long flags; +#define ENTRY_OWNER_NIC 1 + + /* + * Ring we belong to. + */ + struct data_ring *ring; + + /* + * sk_buff for the packet which is being transmitted + * in this entry (Only used with TX related rings). + */ + struct sk_buff *skb; + + /* + * Store a ieee80211_tx_status structure in each + * ring entry, this will optimize the txdone + * handler. + */ + struct ieee80211_tx_status tx_status; + + /* + * private pointer specific to driver. + */ + void *priv; + + /* + * Data address for this entry. + */ + void *data_addr; + dma_addr_t data_dma; +}; + +/* + * data_ring + * Data rings are used by the device to send and receive packets. + * The data_addr is the base address of the data memory. + * To determine at which point in the ring we are, + * have to use the rt2x00_ring_index_*() functions. + */ +struct data_ring { + /* + * Pointer to main rt2x00dev structure where this + * ring belongs to. + */ + struct rt2x00_dev *rt2x00dev; + + /* + * Base address for the device specific data entries. + */ + struct data_entry *entry; + + /* + * TX queue statistic info. + */ + struct ieee80211_tx_queue_stats_data stats; + + /* + * TX Queue parameters. + */ + struct ieee80211_tx_queue_params tx_params; + + /* + * Base address for data ring. + */ + dma_addr_t data_dma; + void *data_addr; + + /* + * Index variables. + */ + u16 index; + u16 index_done; + + /* + * Size of packet and descriptor in bytes. + */ + u16 data_size; + u16 desc_size; +}; + +/* + * Handlers to determine the address of the current device specific + * data entry, where either index or index_done points to. + */ +static inline struct data_entry *rt2x00_get_data_entry(struct data_ring *ring) +{ + return &ring->entry[ring->index]; +} + +static inline struct data_entry *rt2x00_get_data_entry_done(struct data_ring + *ring) +{ + return &ring->entry[ring->index_done]; +} + +/* + * Total ring memory + */ +static inline int rt2x00_get_ring_size(struct data_ring *ring) +{ + return ring->stats.limit * (ring->desc_size + ring->data_size); +} + +/* + * Ring index manipulation functions. + */ +static inline void rt2x00_ring_index_inc(struct data_ring *ring) +{ + ring->index++; + if (ring->index >= ring->stats.limit) + ring->index = 0; + ring->stats.len++; +} + +static inline void rt2x00_ring_index_done_inc(struct data_ring *ring) +{ + ring->index_done++; + if (ring->index_done >= ring->stats.limit) + ring->index_done = 0; + ring->stats.len--; + ring->stats.count++; +} + +static inline void rt2x00_ring_index_clear(struct data_ring *ring) +{ + ring->index = 0; + ring->index_done = 0; + ring->stats.len = 0; + ring->stats.count = 0; +} + +static inline int rt2x00_ring_empty(struct data_ring *ring) +{ + return ring->stats.len == 0; +} + +static inline int rt2x00_ring_full(struct data_ring *ring) +{ + return ring->stats.len == ring->stats.limit; +} + +static inline int rt2x00_ring_free(struct data_ring *ring) +{ + return ring->stats.limit - ring->stats.len; +} + +/* + * TX/RX Descriptor access functions. + */ +static inline void rt2x00_desc_read(struct data_desc *desc, + const u8 word, u32 *value) +{ + *value = le32_to_cpu(desc->word[word]); +} + +static inline void rt2x00_desc_write(struct data_desc *desc, + const u8 word, const u32 value) +{ + desc->word[word] = cpu_to_le32(value); +} + +#endif /* RT2X00RING_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c new file mode 100644 index 000000000000..a0f05ca54bb4 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -0,0 +1,595 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00usb + Abstract: rt2x00 generic usb device routines. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt2x00usb" + +#include +#include +#include + +#include "rt2x00.h" +#include "rt2x00usb.h" + +/* + * Interfacing with the HW. + */ +int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, const u16 value, + void *buffer, const u16 buffer_length, + u16 timeout) +{ + struct usb_device *usb_dev = + interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); + int status; + unsigned int i; + unsigned int pipe = + (requesttype == USB_VENDOR_REQUEST_IN) ? + usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + status = usb_control_msg(usb_dev, pipe, request, requesttype, + value, offset, buffer, buffer_length, + timeout); + if (status >= 0) + return 0; + + /* + * Check for errors, + * -ETIMEDOUT: We need a bit more time to complete. + * -ENODEV: Device has disappeared, no point continuing. + */ + if (status == -ETIMEDOUT) + timeout *= 2; + else if (status == -ENODEV) + break; + } + + ERROR(rt2x00dev, + "Vendor Request 0x%02x failed for offset 0x%04x with error %d.\n", + request, offset, status); + + return status; +} +EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request); + +int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, void *buffer, + const u16 buffer_length, u16 timeout) +{ + int status; + + /* + * Check for Cache availability. + */ + if (unlikely(!rt2x00dev->csr_cache || buffer_length > CSR_CACHE_SIZE)) { + ERROR(rt2x00dev, "CSR cache not available.\n"); + return -ENOMEM; + } + + if (requesttype == USB_VENDOR_REQUEST_OUT) + memcpy(rt2x00dev->csr_cache, buffer, buffer_length); + + status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype, + offset, 0, rt2x00dev->csr_cache, + buffer_length, timeout); + + if (!status && requesttype == USB_VENDOR_REQUEST_IN) + memcpy(buffer, rt2x00dev->csr_cache, buffer_length); + + return status; +} +EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); + +/* + * TX data handlers. + */ +static void rt2x00usb_interrupt_txdone(struct urb *urb) +{ + struct data_entry *entry = (struct data_entry *)urb->context; + struct data_ring *ring = entry->ring; + struct rt2x00_dev *rt2x00dev = ring->rt2x00dev; + struct data_desc *txd = (struct data_desc *)entry->skb->data; + u32 word; + int tx_status; + + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || + !__test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags)) + return; + + rt2x00_desc_read(txd, 0, &word); + + /* + * Remove the descriptor data from the buffer. + */ + skb_pull(entry->skb, ring->desc_size); + + /* + * Obtain the status about this packet. + */ + tx_status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY; + + rt2x00lib_txdone(entry, tx_status, 0); + + /* + * Make this entry available for reuse. + */ + entry->flags = 0; + rt2x00_ring_index_done_inc(entry->ring); + + /* + * If the data ring was full before the txdone handler + * we must make sure the packet queue in the mac80211 stack + * is reenabled when the txdone handler has finished. + */ + if (!rt2x00_ring_full(ring)) + ieee80211_wake_queue(rt2x00dev->hw, + entry->tx_status.control.queue); +} + +int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, + struct data_ring *ring, struct sk_buff *skb, + struct ieee80211_tx_control *control) +{ + struct usb_device *usb_dev = + interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); + struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; + struct data_entry *entry = rt2x00_get_data_entry(ring); + u32 length = skb->len; + + if (rt2x00_ring_full(ring)) { + ieee80211_stop_queue(rt2x00dev->hw, control->queue); + return -EINVAL; + } + + if (test_bit(ENTRY_OWNER_NIC, &entry->flags)) { + ERROR(rt2x00dev, + "Arrived at non-free entry in the non-full queue %d.\n" + "Please file bug report to %s.\n", + control->queue, DRV_PROJECT); + ieee80211_stop_queue(rt2x00dev->hw, control->queue); + return -EINVAL; + } + + /* + * Add the descriptor in front of the skb. + */ + skb_push(skb, rt2x00dev->hw->extra_tx_headroom); + memset(skb->data, 0x00, rt2x00dev->hw->extra_tx_headroom); + + rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data, + ieee80211hdr, length, control); + memcpy(&entry->tx_status.control, control, sizeof(*control)); + entry->skb = skb; + + /* + * Length passed to usb_fill_urb cannot be an odd number, + * so add 1 byte to make it even. + */ + length += rt2x00dev->hw->extra_tx_headroom; + if (length % 2) + length++; + + __set_bit(ENTRY_OWNER_NIC, &entry->flags); + usb_fill_bulk_urb(entry->priv, usb_dev, + usb_sndbulkpipe(usb_dev, 1), + skb->data, length, rt2x00usb_interrupt_txdone, entry); + usb_submit_urb(entry->priv, GFP_ATOMIC); + + rt2x00_ring_index_inc(ring); + + if (rt2x00_ring_full(ring)) + ieee80211_stop_queue(rt2x00dev->hw, control->queue); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data); + +/* + * RX data handlers. + */ +static void rt2x00usb_interrupt_rxdone(struct urb *urb) +{ + struct data_entry *entry = (struct data_entry *)urb->context; + struct data_ring *ring = entry->ring; + struct rt2x00_dev *rt2x00dev = ring->rt2x00dev; + struct sk_buff *skb; + int retval; + int signal; + int rssi; + int ofdm; + int size; + int frame_size; + + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || + !test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags)) + return; + + /* + * Check if the received data is simply too small + * to be actually valid, or if the urb is signaling + * a problem. + */ + if (urb->actual_length < entry->ring->desc_size || urb->status) + goto skip_entry; + + retval = rt2x00dev->ops->lib->fill_rxdone(entry, &signal, &rssi, + &ofdm, &size); + if (retval) + goto skip_entry; + + /* + * Allocate a new sk buffer to replace the current one. + * If allocation fails, we should drop the current frame + * so we can recycle the existing sk buffer for the new frame. + */ + frame_size = entry->ring->data_size + entry->ring->desc_size; + skb = dev_alloc_skb(frame_size + NET_IP_ALIGN); + if (!skb) + goto skip_entry; + + skb_reserve(skb, NET_IP_ALIGN); + skb_put(skb, frame_size); + + /* + * Trim the skb_buffer to only contain the valid + * frame data (so ignore the device's descriptor). + */ + skb_trim(entry->skb, size); + + /* + * Send the frame to rt2x00lib for further processing. + */ + rt2x00lib_rxdone(entry, entry->skb, signal, rssi, ofdm); + + /* + * Replace current entry's skb with the newly allocated one, + * and reinitialize the urb. + */ + entry->skb = skb; + urb->transfer_buffer = entry->skb->data; + urb->transfer_buffer_length = entry->skb->len; + +skip_entry: + if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) { + __set_bit(ENTRY_OWNER_NIC, &entry->flags); + usb_submit_urb(urb, GFP_ATOMIC); + } + + rt2x00_ring_index_inc(ring); +} + +/* + * Radio handlers + */ +void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + struct usb_device *usb_dev = + interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); + struct data_ring *ring; + struct data_entry *entry; + unsigned int i; + + /* + * Initialize the TX rings + */ + txringall_for_each(rt2x00dev, ring) { + for (i = 0; i < ring->stats.limit; i++) + ring->entry[i].flags = 0; + + rt2x00_ring_index_clear(ring); + } + + /* + * Initialize and start the RX ring. + */ + rt2x00_ring_index_clear(rt2x00dev->rx); + + for (i = 0; i < rt2x00dev->rx->stats.limit; i++) { + entry = &rt2x00dev->rx->entry[i]; + + usb_fill_bulk_urb(entry->priv, usb_dev, + usb_rcvbulkpipe(usb_dev, 1), + entry->skb->data, entry->skb->len, + rt2x00usb_interrupt_rxdone, entry); + + __set_bit(ENTRY_OWNER_NIC, &entry->flags); + usb_submit_urb(entry->priv, GFP_ATOMIC); + } +} +EXPORT_SYMBOL_GPL(rt2x00usb_enable_radio); + +void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring; + unsigned int i; + + rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000, + REGISTER_TIMEOUT); + + /* + * Cancel all rings. + */ + ring_for_each(rt2x00dev, ring) { + for (i = 0; i < ring->stats.limit; i++) + usb_kill_urb(ring->entry[i].priv); + } +} +EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); + +/* + * Device initialization handlers. + */ +static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, + struct data_ring *ring) +{ + unsigned int i; + + /* + * Allocate the URB's + */ + for (i = 0; i < ring->stats.limit; i++) { + ring->entry[i].priv = usb_alloc_urb(0, GFP_KERNEL); + if (!ring->entry[i].priv) + return -ENOMEM; + } + + return 0; +} + +static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, + struct data_ring *ring) +{ + unsigned int i; + + if (!ring->entry) + return; + + for (i = 0; i < ring->stats.limit; i++) { + usb_kill_urb(ring->entry[i].priv); + usb_free_urb(ring->entry[i].priv); + if (ring->entry[i].skb) + kfree_skb(ring->entry[i].skb); + } +} + +int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring; + struct sk_buff *skb; + unsigned int entry_size; + unsigned int i; + int status; + + /* + * Allocate DMA + */ + ring_for_each(rt2x00dev, ring) { + status = rt2x00usb_alloc_urb(rt2x00dev, ring); + if (status) + goto exit; + } + + /* + * For the RX ring, skb's should be allocated. + */ + entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size; + for (i = 0; i < rt2x00dev->rx->stats.limit; i++) { + skb = dev_alloc_skb(NET_IP_ALIGN + entry_size); + if (!skb) + goto exit; + + skb_reserve(skb, NET_IP_ALIGN); + skb_put(skb, entry_size); + + rt2x00dev->rx->entry[i].skb = skb; + } + + return 0; + +exit: + rt2x00usb_uninitialize(rt2x00dev); + + return status; +} +EXPORT_SYMBOL_GPL(rt2x00usb_initialize); + +void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring; + + ring_for_each(rt2x00dev, ring) + rt2x00usb_free_urb(rt2x00dev, ring); +} +EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize); + +/* + * USB driver handlers. + */ +static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev) +{ + kfree(rt2x00dev->rf); + rt2x00dev->rf = NULL; + + kfree(rt2x00dev->eeprom); + rt2x00dev->eeprom = NULL; + + kfree(rt2x00dev->csr_cache); + rt2x00dev->csr_cache = NULL; +} + +static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev) +{ + rt2x00dev->csr_cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL); + if (!rt2x00dev->csr_cache) + goto exit; + + rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); + if (!rt2x00dev->eeprom) + goto exit; + + rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); + if (!rt2x00dev->rf) + goto exit; + + return 0; + +exit: + ERROR_PROBE("Failed to allocate registers.\n"); + + rt2x00usb_free_reg(rt2x00dev); + + return -ENOMEM; +} + +int rt2x00usb_probe(struct usb_interface *usb_intf, + const struct usb_device_id *id) +{ + struct usb_device *usb_dev = interface_to_usbdev(usb_intf); + struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_info; + struct ieee80211_hw *hw; + struct rt2x00_dev *rt2x00dev; + int retval; + + usb_dev = usb_get_dev(usb_dev); + + hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); + if (!hw) { + ERROR_PROBE("Failed to allocate hardware.\n"); + retval = -ENOMEM; + goto exit_put_device; + } + + usb_set_intfdata(usb_intf, hw); + + rt2x00dev = hw->priv; + rt2x00dev->dev = usb_intf; + rt2x00dev->ops = ops; + rt2x00dev->hw = hw; + + retval = rt2x00usb_alloc_reg(rt2x00dev); + if (retval) + goto exit_free_device; + + retval = rt2x00lib_probe_dev(rt2x00dev); + if (retval) + goto exit_free_reg; + + return 0; + +exit_free_reg: + rt2x00usb_free_reg(rt2x00dev); + +exit_free_device: + ieee80211_free_hw(hw); + +exit_put_device: + usb_put_dev(usb_dev); + + usb_set_intfdata(usb_intf, NULL); + + return retval; +} +EXPORT_SYMBOL_GPL(rt2x00usb_probe); + +void rt2x00usb_disconnect(struct usb_interface *usb_intf) +{ + struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * Free all allocated data. + */ + rt2x00lib_remove_dev(rt2x00dev); + rt2x00usb_free_reg(rt2x00dev); + ieee80211_free_hw(hw); + + /* + * Free the USB device data. + */ + usb_set_intfdata(usb_intf, NULL); + usb_put_dev(interface_to_usbdev(usb_intf)); +} +EXPORT_SYMBOL_GPL(rt2x00usb_disconnect); + +#ifdef CONFIG_PM +int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state) +{ + struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); + struct rt2x00_dev *rt2x00dev = hw->priv; + int retval; + + retval = rt2x00lib_suspend(rt2x00dev, state); + if (retval) + return retval; + + rt2x00usb_free_reg(rt2x00dev); + + /* + * Decrease usbdev refcount. + */ + usb_put_dev(interface_to_usbdev(usb_intf)); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00usb_suspend); + +int rt2x00usb_resume(struct usb_interface *usb_intf) +{ + struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); + struct rt2x00_dev *rt2x00dev = hw->priv; + int retval; + + usb_get_dev(interface_to_usbdev(usb_intf)); + + retval = rt2x00usb_alloc_reg(rt2x00dev); + if (retval) + return retval; + + retval = rt2x00lib_resume(rt2x00dev); + if (retval) + goto exit_free_reg; + + return 0; + +exit_free_reg: + rt2x00usb_free_reg(rt2x00dev); + + return retval; +} +EXPORT_SYMBOL_GPL(rt2x00usb_resume); +#endif /* CONFIG_PM */ + +/* + * rt2x00pci module information. + */ +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("rt2x00 library"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h new file mode 100644 index 000000000000..d4113e5158f0 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -0,0 +1,180 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00usb + Abstract: Data structures for the rt2x00usb module. + */ + +#ifndef RT2X00USB_H +#define RT2X00USB_H + +/* + * This variable should be used with the + * usb_driver structure initialization. + */ +#define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops) + +/* + * Register defines. + * Some registers require multiple attempts before success, + * in those cases REGISTER_BUSY_COUNT attempts should be + * taken with a REGISTER_BUSY_DELAY interval. + * For USB vendor requests we need to pass a timeout + * time in ms, for this we use the REGISTER_TIMEOUT, + * however when loading firmware a higher value is + * required. In that case we use the REGISTER_TIMEOUT_FIRMWARE. + */ +#define REGISTER_BUSY_COUNT 5 +#define REGISTER_BUSY_DELAY 100 +#define REGISTER_TIMEOUT 20 +#define REGISTER_TIMEOUT_FIRMWARE 1000 + +/* + * Cache size + */ +#define CSR_CACHE_SIZE 8 +#define CSR_CACHE_SIZE_FIRMWARE 64 + +/* + * USB request types. + */ +#define USB_VENDOR_REQUEST ( USB_TYPE_VENDOR | USB_RECIP_DEVICE ) +#define USB_VENDOR_REQUEST_IN ( USB_DIR_IN | USB_VENDOR_REQUEST ) +#define USB_VENDOR_REQUEST_OUT ( USB_DIR_OUT | USB_VENDOR_REQUEST ) + +/* + * USB vendor commands. + */ +#define USB_DEVICE_MODE 0x01 +#define USB_SINGLE_WRITE 0x02 +#define USB_SINGLE_READ 0x03 +#define USB_MULTI_WRITE 0x06 +#define USB_MULTI_READ 0x07 +#define USB_EEPROM_WRITE 0x08 +#define USB_EEPROM_READ 0x09 +#define USB_LED_CONTROL 0x0a /* RT73USB */ +#define USB_RX_CONTROL 0x0c + +/* + * Device modes offset + */ +#define USB_MODE_RESET 0x01 +#define USB_MODE_UNPLUG 0x02 +#define USB_MODE_FUNCTION 0x03 +#define USB_MODE_TEST 0x04 +#define USB_MODE_SLEEP 0x07 /* RT73USB */ +#define USB_MODE_FIRMWARE 0x08 /* RT73USB */ +#define USB_MODE_WAKEUP 0x09 /* RT73USB */ + +/* + * Used to read/write from/to the device. + * This is the main function to communicate with the device, + * the buffer argument _must_ either be NULL or point to + * a buffer allocated by kmalloc. Failure to do so can lead + * to unexpected behavior depending on the architecture. + */ +int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, const u16 value, + void *buffer, const u16 buffer_length, + u16 timeout); + +/* + * Used to read/write from/to the device. + * This function will use a previously with kmalloc allocated cache + * to communicate with the device. The contents of the buffer pointer + * will be copied to this cache when writing, or read from the cache + * when reading. + * Buffers send to rt2x00usb_vendor_request _must_ be allocated with + * kmalloc. Hence the reason for using a previously allocated cache + * which has been allocated properly. + */ +int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, void *buffer, + const u16 buffer_length, u16 timeout); + +/* + * Simple wrapper around rt2x00usb_vendor_request to write a single + * command to the device. Since we don't use the buffer argument we + * don't have to worry about kmalloc here. + */ +static inline int rt2x00usb_vendor_request_sw(const struct rt2x00_dev + *rt2x00dev, + const u8 request, + const u16 offset, + const u16 value, + int timeout) +{ + return rt2x00usb_vendor_request(rt2x00dev, request, + USB_VENDOR_REQUEST_OUT, offset, + value, NULL, 0, timeout); +} + +/* + * Simple wrapper around rt2x00usb_vendor_request to read the eeprom + * from the device. Note that the eeprom argument _must_ be allocated using + * kmalloc for correct handling inside the kernel USB layer. + */ +static inline int rt2x00usb_eeprom_read(const struct rt2x00_dev *rt2x00dev, + __le16 *eeprom, const u16 lenght) +{ + int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16)); + + return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ, + USB_VENDOR_REQUEST_IN, 0x0000, + 0x0000, eeprom, lenght, timeout); +} + +/* + * Radio handlers + */ +void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev); +void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev); + +/* + * TX data handlers. + */ +int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, + struct data_ring *ring, struct sk_buff *skb, + struct ieee80211_tx_control *control); + +/* + * Device initialization handlers. + */ +int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev); +void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev); + +/* + * USB driver handlers. + */ +int rt2x00usb_probe(struct usb_interface *usb_intf, + const struct usb_device_id *id); +void rt2x00usb_disconnect(struct usb_interface *usb_intf); +#ifdef CONFIG_PM +int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state); +int rt2x00usb_resume(struct usb_interface *usb_intf); +#else +#define rt2x00usb_suspend NULL +#define rt2x00usb_resume NULL +#endif /* CONFIG_PM */ + +#endif /* RT2X00USB_H */ diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c new file mode 100644 index 000000000000..730bed5a1984 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -0,0 +1,2603 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt61pci + Abstract: rt61pci device specific routines. + Supported chipsets: RT2561, RT2561s, RT2661. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt61pci" + +#include +#include +#include +#include +#include +#include +#include + +#include "rt2x00.h" +#include "rt2x00pci.h" +#include "rt61pci.h" + +/* + * Register access. + * BBP and RF register require indirect register access, + * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this. + * These indirect registers work with busy bits, + * and we will try maximal REGISTER_BUSY_COUNT times to access + * the register while taking a REGISTER_BUSY_DELAY us delay + * between each attampt. When the busy bit is still set at that time, + * the access attempt is considered to have failed, + * and we will print an error. + */ +static u32 rt61pci_bbp_check(const struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + unsigned int i; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00pci_register_read(rt2x00dev, PHY_CSR3, ®); + if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY)) + break; + udelay(REGISTER_BUSY_DELAY); + } + + return reg; +} + +static void rt61pci_bbp_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u32 reg; + + /* + * Wait until the BBP becomes ready. + */ + reg = rt61pci_bbp_check(rt2x00dev); + if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { + ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n"); + return; + } + + /* + * Write the data into the BBP. + */ + reg = 0; + rt2x00_set_field32(®, PHY_CSR3_VALUE, value); + rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); + rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); + rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); + + rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); +} + +static void rt61pci_bbp_read(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u8 *value) +{ + u32 reg; + + /* + * Wait until the BBP becomes ready. + */ + reg = rt61pci_bbp_check(rt2x00dev); + if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { + ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); + return; + } + + /* + * Write the request into the BBP. + */ + reg = 0; + rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); + rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); + rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); + + rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); + + /* + * Wait until the BBP becomes ready. + */ + reg = rt61pci_bbp_check(rt2x00dev); + if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { + ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); + *value = 0xff; + return; + } + + *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); +} + +static void rt61pci_rf_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) +{ + u32 reg; + unsigned int i; + + if (!word) + return; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00pci_register_read(rt2x00dev, PHY_CSR4, ®); + if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY)) + goto rf_write; + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n"); + return; + +rf_write: + reg = 0; + rt2x00_set_field32(®, PHY_CSR4_VALUE, value); + rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, 21); + rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); + rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); + + rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg); + rt2x00_rf_write(rt2x00dev, word, value); +} + +static void rt61pci_mcu_request(const struct rt2x00_dev *rt2x00dev, + const u8 command, const u8 token, + const u8 arg0, const u8 arg1) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CSR, ®); + + if (rt2x00_get_field32(reg, H2M_MAILBOX_CSR_OWNER)) { + ERROR(rt2x00dev, "mcu request error. " + "Request 0x%02x failed for token 0x%02x.\n", + command, token); + return; + } + + rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); + rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, HOST_CMD_CSR, ®); + rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); + rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1); + rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); +} + +static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom) +{ + struct rt2x00_dev *rt2x00dev = eeprom->data; + u32 reg; + + rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); + + eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN); + eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT); + eeprom->reg_data_clock = + !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK); + eeprom->reg_chip_select = + !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT); +} + +static void rt61pci_eepromregister_write(struct eeprom_93cx6 *eeprom) +{ + struct rt2x00_dev *rt2x00dev = eeprom->data; + u32 reg = 0; + + rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in); + rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out); + rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK, + !!eeprom->reg_data_clock); + rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT, + !!eeprom->reg_chip_select); + + rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg); +} + +#ifdef CONFIG_RT2X00_LIB_DEBUGFS +#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) + +static void rt61pci_read_csr(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u32 *data) +{ + rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data); +} + +static void rt61pci_write_csr(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u32 data) +{ + rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data); +} + +static const struct rt2x00debug rt61pci_rt2x00debug = { + .owner = THIS_MODULE, + .csr = { + .read = rt61pci_read_csr, + .write = rt61pci_write_csr, + .word_size = sizeof(u32), + .word_count = CSR_REG_SIZE / sizeof(u32), + }, + .eeprom = { + .read = rt2x00_eeprom_read, + .write = rt2x00_eeprom_write, + .word_size = sizeof(u16), + .word_count = EEPROM_SIZE / sizeof(u16), + }, + .bbp = { + .read = rt61pci_bbp_read, + .write = rt61pci_bbp_write, + .word_size = sizeof(u8), + .word_count = BBP_SIZE / sizeof(u8), + }, + .rf = { + .read = rt2x00_rf_read, + .write = rt61pci_rf_write, + .word_size = sizeof(u32), + .word_count = RF_SIZE / sizeof(u32), + }, +}; +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + +#ifdef CONFIG_RT61PCI_RFKILL +static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); + return rt2x00_get_field32(reg, MAC_CSR13_BIT5);; +} +#endif /* CONFIG_RT2400PCI_RFKILL */ + +/* + * Configuration handlers. + */ +static void rt61pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr) +{ + __le32 reg[2]; + u32 tmp; + + memset(®, 0, sizeof(reg)); + memcpy(®, addr, ETH_ALEN); + + tmp = le32_to_cpu(reg[1]); + rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); + reg[1] = cpu_to_le32(tmp); + + /* + * The MAC address is passed to us as an array of bytes, + * that array is little endian, so no need for byte ordering. + */ + rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, ®, sizeof(reg)); +} + +static void rt61pci_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid) +{ + __le32 reg[2]; + u32 tmp; + + memset(®, 0, sizeof(reg)); + memcpy(®, bssid, ETH_ALEN); + + tmp = le32_to_cpu(reg[1]); + rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3); + reg[1] = cpu_to_le32(tmp); + + /* + * The BSSID is passed to us as an array of bytes, + * that array is little endian, so no need for byte ordering. + */ + rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, ®, sizeof(reg)); +} + +static void rt61pci_config_packet_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter) +{ + int promisc = !!(filter & IFF_PROMISC); + int multicast = !!(filter & IFF_MULTICAST); + int broadcast = !!(filter & IFF_BROADCAST); + u32 reg; + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, !promisc); + rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, !multicast); + rt2x00_set_field32(®, TXRX_CSR0_DROP_BORADCAST, !broadcast); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); +} + +static void rt61pci_config_type(struct rt2x00_dev *rt2x00dev, const int type) +{ + u32 reg; + + /* + * Clear current synchronisation setup. + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0); + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0); + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0); + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + + /* + * Apply hardware packet filter. + */ + rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); + + if (!is_monitor_present(&rt2x00dev->interface) && + (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA)) + rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, 1); + else + rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, 0); + + /* + * If there is a non-monitor interface present + * the packet should be strict (even if a monitor interface is present!). + * When there is only 1 interface present which is in monitor mode + * we should start accepting _all_ frames. + */ + if (is_interface_present(&rt2x00dev->interface)) { + rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1); + } else if (is_monitor_present(&rt2x00dev->interface)) { + rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, 0); + rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, 0); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, 0); + rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 0); + rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 0); + } + + rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); + + /* + * Enable synchronisation. + */ + rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); + if (is_interface_present(&rt2x00dev->interface)) { + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); + } + + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); + if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP) + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 2); + else if (type == IEEE80211_IF_TYPE_STA) + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 1); + else if (is_monitor_present(&rt2x00dev->interface) && + !is_interface_present(&rt2x00dev->interface)) + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0); + + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); +} + +static void rt61pci_config_rate(struct rt2x00_dev *rt2x00dev, const int rate) +{ + struct ieee80211_conf *conf = &rt2x00dev->hw->conf; + u32 reg; + u32 value; + u32 preamble; + + if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE)) + preamble = SHORT_PREAMBLE; + else + preamble = PREAMBLE; + + /* + * Extract the allowed ratemask from the device specific rate value, + * We need to set TXRX_CSR5 to the basic rate mask so we need to mask + * off the non-basic rates. + */ + reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK; + + rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, reg); + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); + value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ? + SHORT_DIFS : DIFS) + + PLCP + preamble + get_duration(ACK_SIZE, 10); + rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, value); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); + if (preamble == SHORT_PREAMBLE) + rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, 1); + else + rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, 0); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); +} + +static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev, + const int phymode) +{ + struct ieee80211_hw_mode *mode; + struct ieee80211_rate *rate; + + if (phymode == MODE_IEEE80211A) + rt2x00dev->curr_hwmode = HWMODE_A; + else if (phymode == MODE_IEEE80211B) + rt2x00dev->curr_hwmode = HWMODE_B; + else + rt2x00dev->curr_hwmode = HWMODE_G; + + mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode]; + rate = &mode->rates[mode->num_rates - 1]; + + rt61pci_config_rate(rt2x00dev, rate->val2); +} + +static void rt61pci_config_lock_channel(struct rt2x00_dev *rt2x00dev, + struct rf_channel *rf, + const int txpower) +{ + u8 r3; + u8 r94; + u8 smart; + + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); + + smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) || + rt2x00_rf(&rt2x00dev->chip, RF2527)); + + rt61pci_bbp_read(rt2x00dev, 3, &r3); + rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart); + rt61pci_bbp_write(rt2x00dev, 3, r3); + + r94 = 6; + if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94)) + r94 += txpower - MAX_TXPOWER; + else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94)) + r94 += txpower; + rt61pci_bbp_write(rt2x00dev, 94, r94); + + rt61pci_rf_write(rt2x00dev, 1, rf->rf1); + rt61pci_rf_write(rt2x00dev, 2, rf->rf2); + rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt61pci_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt61pci_rf_write(rt2x00dev, 1, rf->rf1); + rt61pci_rf_write(rt2x00dev, 2, rf->rf2); + rt61pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); + rt61pci_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt61pci_rf_write(rt2x00dev, 1, rf->rf1); + rt61pci_rf_write(rt2x00dev, 2, rf->rf2); + rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt61pci_rf_write(rt2x00dev, 4, rf->rf4); + + msleep(1); +} + +static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev, + const int index, const int channel, + const int txpower) +{ + struct rf_channel rf; + + /* + * Fill rf_reg structure. + */ + memcpy(&rf, &rt2x00dev->spec.channels[index], sizeof(rf)); + + rt61pci_config_lock_channel(rt2x00dev, &rf, txpower); +} + +static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev, + const int txpower) +{ + struct rf_channel rf; + + rt2x00_rf_read(rt2x00dev, 1, &rf.rf1); + rt2x00_rf_read(rt2x00dev, 2, &rf.rf2); + rt2x00_rf_read(rt2x00dev, 3, &rf.rf3); + rt2x00_rf_read(rt2x00dev, 4, &rf.rf4); + + rt61pci_config_lock_channel(rt2x00dev, &rf, txpower); +} + +static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev, + const int antenna_tx, + const int antenna_rx) +{ + u8 r3; + u8 r4; + u8 r77; + + rt61pci_bbp_read(rt2x00dev, 3, &r3); + rt61pci_bbp_read(rt2x00dev, 4, &r4); + rt61pci_bbp_read(rt2x00dev, 77, &r77); + + rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, + !rt2x00_rf(&rt2x00dev->chip, RF5225)); + + switch (antenna_rx) { + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); + rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, + !!(rt2x00dev->curr_hwmode != HWMODE_A)); + break; + case ANTENNA_A: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); + rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); + + if (rt2x00dev->curr_hwmode == HWMODE_A) + rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); + else + rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); + break; + case ANTENNA_B: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); + rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); + + if (rt2x00dev->curr_hwmode == HWMODE_A) + rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); + else + rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); + break; + } + + rt61pci_bbp_write(rt2x00dev, 77, r77); + rt61pci_bbp_write(rt2x00dev, 3, r3); + rt61pci_bbp_write(rt2x00dev, 4, r4); +} + +static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev, + const int antenna_tx, + const int antenna_rx) +{ + u8 r3; + u8 r4; + u8 r77; + + rt61pci_bbp_read(rt2x00dev, 3, &r3); + rt61pci_bbp_read(rt2x00dev, 4, &r4); + rt61pci_bbp_read(rt2x00dev, 77, &r77); + + rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, + !rt2x00_rf(&rt2x00dev->chip, RF2527)); + rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, + !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)); + + switch (antenna_rx) { + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); + break; + case ANTENNA_A: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); + rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); + break; + case ANTENNA_B: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); + rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); + break; + } + + rt61pci_bbp_write(rt2x00dev, 77, r77); + rt61pci_bbp_write(rt2x00dev, 3, r3); + rt61pci_bbp_write(rt2x00dev, 4, r4); +} + +static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev, + const int p1, const int p2) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); + + if (p1 != 0xff) { + rt2x00_set_field32(®, MAC_CSR13_BIT4, !!p1); + rt2x00_set_field32(®, MAC_CSR13_BIT12, 0); + rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg); + } + if (p2 != 0xff) { + rt2x00_set_field32(®, MAC_CSR13_BIT3, !p2); + rt2x00_set_field32(®, MAC_CSR13_BIT11, 0); + rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg); + } +} + +static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev, + const int antenna_tx, + const int antenna_rx) +{ + u16 eeprom; + u8 r3; + u8 r4; + u8 r77; + + rt61pci_bbp_read(rt2x00dev, 3, &r3); + rt61pci_bbp_read(rt2x00dev, 4, &r4); + rt61pci_bbp_read(rt2x00dev, 77, &r77); + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); + + rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0); + + if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) && + rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) { + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); + rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 1); + rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1); + } else if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY)) { + if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED) >= 2) { + rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); + rt61pci_bbp_write(rt2x00dev, 77, r77); + } + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); + rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); + } else if (!rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) && + rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) { + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); + rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); + + switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) { + case 0: + rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1); + break; + case 1: + rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 0); + break; + case 2: + rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0); + break; + case 3: + rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); + break; + } + } else if (!rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) && + !rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) { + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); + rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); + + switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) { + case 0: + rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); + rt61pci_bbp_write(rt2x00dev, 77, r77); + rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1); + break; + case 1: + rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); + rt61pci_bbp_write(rt2x00dev, 77, r77); + rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 0); + break; + case 2: + rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); + rt61pci_bbp_write(rt2x00dev, 77, r77); + rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0); + break; + case 3: + rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); + rt61pci_bbp_write(rt2x00dev, 77, r77); + rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); + break; + } + } + + rt61pci_bbp_write(rt2x00dev, 3, r3); + rt61pci_bbp_write(rt2x00dev, 4, r4); +} + +struct antenna_sel { + u8 word; + /* + * value[0] -> non-LNA + * value[1] -> LNA + */ + u8 value[2]; +}; + +static const struct antenna_sel antenna_sel_a[] = { + { 96, { 0x58, 0x78 } }, + { 104, { 0x38, 0x48 } }, + { 75, { 0xfe, 0x80 } }, + { 86, { 0xfe, 0x80 } }, + { 88, { 0xfe, 0x80 } }, + { 35, { 0x60, 0x60 } }, + { 97, { 0x58, 0x58 } }, + { 98, { 0x58, 0x58 } }, +}; + +static const struct antenna_sel antenna_sel_bg[] = { + { 96, { 0x48, 0x68 } }, + { 104, { 0x2c, 0x3c } }, + { 75, { 0xfe, 0x80 } }, + { 86, { 0xfe, 0x80 } }, + { 88, { 0xfe, 0x80 } }, + { 35, { 0x50, 0x50 } }, + { 97, { 0x48, 0x48 } }, + { 98, { 0x48, 0x48 } }, +}; + +static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev, + const int antenna_tx, const int antenna_rx) +{ + const struct antenna_sel *sel; + unsigned int lna; + unsigned int i; + u32 reg; + + rt2x00pci_register_read(rt2x00dev, PHY_CSR0, ®); + + if (rt2x00dev->curr_hwmode == HWMODE_A) { + sel = antenna_sel_a; + lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); + + rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 0); + rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 1); + } else { + sel = antenna_sel_bg; + lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); + + rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 1); + rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 0); + } + + for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++) + rt61pci_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]); + + rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg); + + if (rt2x00_rf(&rt2x00dev->chip, RF5225) || + rt2x00_rf(&rt2x00dev->chip, RF5325)) + rt61pci_config_antenna_5x(rt2x00dev, antenna_tx, antenna_rx); + else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) + rt61pci_config_antenna_2x(rt2x00dev, antenna_tx, antenna_rx); + else if (rt2x00_rf(&rt2x00dev->chip, RF2529)) { + if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) + rt61pci_config_antenna_2x(rt2x00dev, antenna_tx, + antenna_rx); + else + rt61pci_config_antenna_2529(rt2x00dev, antenna_tx, + antenna_rx); + } +} + +static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev, + const int short_slot_time, + const int beacon_int) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, MAC_CSR9, ®); + rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, + short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME); + rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg); + + rt2x00pci_register_read(rt2x00dev, MAC_CSR8, ®); + rt2x00_set_field32(®, MAC_CSR8_SIFS, SIFS); + rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); + rt2x00_set_field32(®, MAC_CSR8_EIFS, EIFS); + rt2x00pci_register_write(rt2x00dev, MAC_CSR8, reg); + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); + rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, beacon_int * 16); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); +} + +static void rt61pci_config(struct rt2x00_dev *rt2x00dev, + const unsigned int flags, + struct ieee80211_conf *conf) +{ + int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME; + + if (flags & CONFIG_UPDATE_PHYMODE) + rt61pci_config_phymode(rt2x00dev, conf->phymode); + if (flags & CONFIG_UPDATE_CHANNEL) + rt61pci_config_channel(rt2x00dev, conf->channel_val, + conf->channel, conf->power_level); + if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) + rt61pci_config_txpower(rt2x00dev, conf->power_level); + if (flags & CONFIG_UPDATE_ANTENNA) + rt61pci_config_antenna(rt2x00dev, conf->antenna_sel_tx, + conf->antenna_sel_rx); + if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) + rt61pci_config_duration(rt2x00dev, short_slot_time, + conf->beacon_int); +} + +/* + * LED functions. + */ +static void rt61pci_enable_led(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 led_reg; + u8 arg0; + u8 arg1; + + rt2x00pci_register_read(rt2x00dev, MAC_CSR14, ®); + rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70); + rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30); + rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg); + + led_reg = rt2x00dev->led_reg; + rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 1); + if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) + rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 1); + else + rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 1); + + arg0 = led_reg & 0xff; + arg1 = (led_reg >> 8) & 0xff; + + rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1); +} + +static void rt61pci_disable_led(struct rt2x00_dev *rt2x00dev) +{ + u16 led_reg; + u8 arg0; + u8 arg1; + + led_reg = rt2x00dev->led_reg; + rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 0); + rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 0); + rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 0); + + arg0 = led_reg & 0xff; + arg1 = (led_reg >> 8) & 0xff; + + rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1); +} + +static void rt61pci_activity_led(struct rt2x00_dev *rt2x00dev, int rssi) +{ + u8 led; + + if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH) + return; + + /* + * Led handling requires a positive value for the rssi, + * to do that correctly we need to add the correction. + */ + rssi += rt2x00dev->rssi_offset; + + if (rssi <= 30) + led = 0; + else if (rssi <= 39) + led = 1; + else if (rssi <= 49) + led = 2; + else if (rssi <= 53) + led = 3; + else if (rssi <= 63) + led = 4; + else + led = 5; + + rt61pci_mcu_request(rt2x00dev, MCU_LED_STRENGTH, 0xff, led, 0); +} + +/* + * Link tuning + */ +static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + /* + * Update FCS error count from register. + */ + rt2x00pci_register_read(rt2x00dev, STA_CSR0, ®); + rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR); + + /* + * Update False CCA count from register. + */ + rt2x00pci_register_read(rt2x00dev, STA_CSR1, ®); + rt2x00dev->link.false_cca = + rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); +} + +static void rt61pci_reset_tuner(struct rt2x00_dev *rt2x00dev) +{ + rt61pci_bbp_write(rt2x00dev, 17, 0x20); + rt2x00dev->link.vgc_level = 0x20; +} + +static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); + u8 r17; + u8 up_bound; + u8 low_bound; + + /* + * Update Led strength + */ + rt61pci_activity_led(rt2x00dev, rssi); + + rt61pci_bbp_read(rt2x00dev, 17, &r17); + + /* + * Determine r17 bounds. + */ + if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { + low_bound = 0x28; + up_bound = 0x48; + if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { + low_bound += 0x10; + up_bound += 0x10; + } + } else { + low_bound = 0x20; + up_bound = 0x40; + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { + low_bound += 0x10; + up_bound += 0x10; + } + } + + /* + * Special big-R17 for very short distance + */ + if (rssi >= -35) { + if (r17 != 0x60) + rt61pci_bbp_write(rt2x00dev, 17, 0x60); + return; + } + + /* + * Special big-R17 for short distance + */ + if (rssi >= -58) { + if (r17 != up_bound) + rt61pci_bbp_write(rt2x00dev, 17, up_bound); + return; + } + + /* + * Special big-R17 for middle-short distance + */ + if (rssi >= -66) { + low_bound += 0x10; + if (r17 != low_bound) + rt61pci_bbp_write(rt2x00dev, 17, low_bound); + return; + } + + /* + * Special mid-R17 for middle distance + */ + if (rssi >= -74) { + low_bound += 0x08; + if (r17 != low_bound) + rt61pci_bbp_write(rt2x00dev, 17, low_bound); + return; + } + + /* + * Special case: Change up_bound based on the rssi. + * Lower up_bound when rssi is weaker then -74 dBm. + */ + up_bound -= 2 * (-74 - rssi); + if (low_bound > up_bound) + up_bound = low_bound; + + if (r17 > up_bound) { + rt61pci_bbp_write(rt2x00dev, 17, up_bound); + return; + } + + /* + * r17 does not yet exceed upper limit, continue and base + * the r17 tuning on the false CCA count. + */ + if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) { + if (++r17 > up_bound) + r17 = up_bound; + rt61pci_bbp_write(rt2x00dev, 17, r17); + } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) { + if (--r17 < low_bound) + r17 = low_bound; + rt61pci_bbp_write(rt2x00dev, 17, r17); + } +} + +/* + * Firmware name function. + */ +static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) +{ + char *fw_name; + + switch (rt2x00dev->chip.rt) { + case RT2561: + fw_name = FIRMWARE_RT2561; + break; + case RT2561s: + fw_name = FIRMWARE_RT2561s; + break; + case RT2661: + fw_name = FIRMWARE_RT2661; + break; + default: + fw_name = NULL; + break; + } + + return fw_name; +} + +/* + * Initialization functions. + */ +static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, + const size_t len) +{ + int i; + u32 reg; + + /* + * Wait for stable hardware. + */ + for (i = 0; i < 100; i++) { + rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); + if (reg) + break; + msleep(1); + } + + if (!reg) { + ERROR(rt2x00dev, "Unstable hardware.\n"); + return -EBUSY; + } + + /* + * Prepare MCU and mailbox for firmware loading. + */ + reg = 0; + rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 1); + rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); + rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff); + rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, 0); + + /* + * Write firmware to device. + */ + reg = 0; + rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 1); + rt2x00_set_field32(®, MCU_CNTL_CSR_SELECT_BANK, 1); + rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); + + rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, + data, len); + + rt2x00_set_field32(®, MCU_CNTL_CSR_SELECT_BANK, 0); + rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); + + rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 0); + rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); + + for (i = 0; i < 100; i++) { + rt2x00pci_register_read(rt2x00dev, MCU_CNTL_CSR, ®); + if (rt2x00_get_field32(reg, MCU_CNTL_CSR_READY)) + break; + msleep(1); + } + + if (i == 100) { + ERROR(rt2x00dev, "MCU Control register not ready.\n"); + return -EBUSY; + } + + /* + * Reset MAC and BBP registers. + */ + reg = 0; + rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); + rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); + rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); + + rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); + rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); + rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); + + rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); + rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); + + return 0; +} + +static void rt61pci_init_rxring(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring = rt2x00dev->rx; + struct data_desc *rxd; + unsigned int i; + u32 word; + + memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); + + for (i = 0; i < ring->stats.limit; i++) { + rxd = ring->entry[i].priv; + + rt2x00_desc_read(rxd, 5, &word); + rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, + ring->entry[i].data_dma); + rt2x00_desc_write(rxd, 5, word); + + rt2x00_desc_read(rxd, 0, &word); + rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); + rt2x00_desc_write(rxd, 0, word); + } + + rt2x00_ring_index_clear(rt2x00dev->rx); +} + +static void rt61pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue) +{ + struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); + struct data_desc *txd; + unsigned int i; + u32 word; + + memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); + + for (i = 0; i < ring->stats.limit; i++) { + txd = ring->entry[i].priv; + + rt2x00_desc_read(txd, 1, &word); + rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); + rt2x00_desc_write(txd, 1, word); + + rt2x00_desc_read(txd, 5, &word); + rt2x00_set_field32(&word, TXD_W5_PID_TYPE, queue); + rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, i); + rt2x00_desc_write(txd, 5, word); + + rt2x00_desc_read(txd, 6, &word); + rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, + ring->entry[i].data_dma); + rt2x00_desc_write(txd, 6, word); + + rt2x00_desc_read(txd, 0, &word); + rt2x00_set_field32(&word, TXD_W0_VALID, 0); + rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); + rt2x00_desc_write(txd, 0, word); + } + + rt2x00_ring_index_clear(ring); +} + +static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + /* + * Initialize rings. + */ + rt61pci_init_rxring(rt2x00dev); + rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); + rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); + rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA2); + rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA3); + rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA4); + + /* + * Initialize registers. + */ + rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, ®); + rt2x00_set_field32(®, TX_RING_CSR0_AC0_RING_SIZE, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit); + rt2x00_set_field32(®, TX_RING_CSR0_AC1_RING_SIZE, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit); + rt2x00_set_field32(®, TX_RING_CSR0_AC2_RING_SIZE, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].stats.limit); + rt2x00_set_field32(®, TX_RING_CSR0_AC3_RING_SIZE, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].stats.limit); + rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg); + + rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, ®); + rt2x00_set_field32(®, TX_RING_CSR1_MGMT_RING_SIZE, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].stats.limit); + rt2x00_set_field32(®, TX_RING_CSR1_TXD_SIZE, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size / + 4); + rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg); + + rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, ®); + rt2x00_set_field32(®, AC0_BASE_CSR_RING_REGISTER, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma); + rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, ®); + rt2x00_set_field32(®, AC1_BASE_CSR_RING_REGISTER, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma); + rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, ®); + rt2x00_set_field32(®, AC2_BASE_CSR_RING_REGISTER, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].data_dma); + rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, ®); + rt2x00_set_field32(®, AC3_BASE_CSR_RING_REGISTER, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].data_dma); + rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, MGMT_BASE_CSR, ®); + rt2x00_set_field32(®, MGMT_BASE_CSR_RING_REGISTER, + rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].data_dma); + rt2x00pci_register_write(rt2x00dev, MGMT_BASE_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, ®); + rt2x00_set_field32(®, RX_RING_CSR_RING_SIZE, + rt2x00dev->rx->stats.limit); + rt2x00_set_field32(®, RX_RING_CSR_RXD_SIZE, + rt2x00dev->rx->desc_size / 4); + rt2x00_set_field32(®, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4); + rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, ®); + rt2x00_set_field32(®, RX_BASE_CSR_RING_REGISTER, + rt2x00dev->rx->data_dma); + rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, ®); + rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC0, 2); + rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC1, 2); + rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC2, 2); + rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC3, 2); + rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_MGMT, 0); + rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, ®); + rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC0, 1); + rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1); + rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1); + rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1); + rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_MGMT, 1); + rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, ®); + rt2x00_set_field32(®, RX_CNTL_CSR_LOAD_RXD, 1); + rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg); + + return 0; +} + +static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field32(®, TXRX_CSR0_AUTO_TX_SEQ, 1); + rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0); + rt2x00_set_field32(®, TXRX_CSR0_TX_WITHOUT_WAITING, 0); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR1, ®); + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */ + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1, 30); /* Rssi */ + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */ + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3, 30); /* Rssi */ + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3_VALID, 1); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR1, reg); + + /* + * CCK TXD BBP registers + */ + rt2x00pci_register_read(rt2x00dev, TXRX_CSR2, ®); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0, 13); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1, 12); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2, 11); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3, 10); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3_VALID, 1); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR2, reg); + + /* + * OFDM TXD BBP registers + */ + rt2x00pci_register_read(rt2x00dev, TXRX_CSR3, ®); + rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0, 7); + rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1, 6); + rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2, 5); + rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2_VALID, 1); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR3, reg); + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR7, ®); + rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_6MBS, 59); + rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_9MBS, 53); + rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_12MBS, 49); + rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_18MBS, 46); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR7, reg); + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR8, ®); + rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_24MBS, 44); + rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_36MBS, 42); + rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_48MBS, 42); + rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg); + + rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); + + rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff); + + rt2x00pci_register_read(rt2x00dev, MAC_CSR9, ®); + rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0); + rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg); + + rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x0000071c); + + if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) + return -EBUSY; + + rt2x00pci_register_write(rt2x00dev, MAC_CSR13, 0x0000e000); + + /* + * Invalidate all Shared Keys (SEC_CSR0), + * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5) + */ + rt2x00pci_register_write(rt2x00dev, SEC_CSR0, 0x00000000); + rt2x00pci_register_write(rt2x00dev, SEC_CSR1, 0x00000000); + rt2x00pci_register_write(rt2x00dev, SEC_CSR5, 0x00000000); + + rt2x00pci_register_write(rt2x00dev, PHY_CSR1, 0x000023b0); + rt2x00pci_register_write(rt2x00dev, PHY_CSR5, 0x060a100c); + rt2x00pci_register_write(rt2x00dev, PHY_CSR6, 0x00080606); + rt2x00pci_register_write(rt2x00dev, PHY_CSR7, 0x00000a08); + + rt2x00pci_register_write(rt2x00dev, PCI_CFG_CSR, 0x28ca4404); + + rt2x00pci_register_write(rt2x00dev, TEST_MODE_CSR, 0x00000200); + + rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff); + + rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, ®); + rt2x00_set_field32(®, AC_TXOP_CSR0_AC0_TX_OP, 0); + rt2x00_set_field32(®, AC_TXOP_CSR0_AC1_TX_OP, 0); + rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg); + + rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, ®); + rt2x00_set_field32(®, AC_TXOP_CSR1_AC2_TX_OP, 192); + rt2x00_set_field32(®, AC_TXOP_CSR1_AC3_TX_OP, 48); + rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); + + /* + * We must clear the error counters. + * These registers are cleared on read, + * so we may pass a useless variable to store the value. + */ + rt2x00pci_register_read(rt2x00dev, STA_CSR0, ®); + rt2x00pci_register_read(rt2x00dev, STA_CSR1, ®); + rt2x00pci_register_read(rt2x00dev, STA_CSR2, ®); + + /* + * Reset MAC and BBP registers. + */ + rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); + rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); + rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); + + rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); + rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); + rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); + + rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); + rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); + + return 0; +} + +static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt61pci_bbp_read(rt2x00dev, 0, &value); + if ((value != 0xff) && (value != 0x00)) + goto continue_csr_init; + NOTICE(rt2x00dev, "Waiting for BBP register.\n"); + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); + return -EACCES; + +continue_csr_init: + rt61pci_bbp_write(rt2x00dev, 3, 0x00); + rt61pci_bbp_write(rt2x00dev, 15, 0x30); + rt61pci_bbp_write(rt2x00dev, 21, 0xc8); + rt61pci_bbp_write(rt2x00dev, 22, 0x38); + rt61pci_bbp_write(rt2x00dev, 23, 0x06); + rt61pci_bbp_write(rt2x00dev, 24, 0xfe); + rt61pci_bbp_write(rt2x00dev, 25, 0x0a); + rt61pci_bbp_write(rt2x00dev, 26, 0x0d); + rt61pci_bbp_write(rt2x00dev, 34, 0x12); + rt61pci_bbp_write(rt2x00dev, 37, 0x07); + rt61pci_bbp_write(rt2x00dev, 39, 0xf8); + rt61pci_bbp_write(rt2x00dev, 41, 0x60); + rt61pci_bbp_write(rt2x00dev, 53, 0x10); + rt61pci_bbp_write(rt2x00dev, 54, 0x18); + rt61pci_bbp_write(rt2x00dev, 60, 0x10); + rt61pci_bbp_write(rt2x00dev, 61, 0x04); + rt61pci_bbp_write(rt2x00dev, 62, 0x04); + rt61pci_bbp_write(rt2x00dev, 75, 0xfe); + rt61pci_bbp_write(rt2x00dev, 86, 0xfe); + rt61pci_bbp_write(rt2x00dev, 88, 0xfe); + rt61pci_bbp_write(rt2x00dev, 90, 0x0f); + rt61pci_bbp_write(rt2x00dev, 99, 0x00); + rt61pci_bbp_write(rt2x00dev, 102, 0x16); + rt61pci_bbp_write(rt2x00dev, 107, 0x04); + + DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); + + if (eeprom != 0xffff && eeprom != 0x0000) { + reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); + value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); + DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", + reg_id, value); + rt61pci_bbp_write(rt2x00dev, reg_id, value); + } + } + DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); + + return 0; +} + +/* + * Device state switch handlers. + */ +static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + u32 reg; + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, + state == STATE_RADIO_RX_OFF); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); +} + +static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int mask = (state == STATE_RADIO_IRQ_OFF); + u32 reg; + + /* + * When interrupts are being enabled, the interrupt registers + * should clear the register to assure a clean state. + */ + if (state == STATE_RADIO_IRQ_ON) { + rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); + rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, ®); + rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg); + } + + /* + * Only toggle the interrupts bits we are going to use. + * Non-checked interrupt bits are disabled by default. + */ + rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®); + rt2x00_set_field32(®, INT_MASK_CSR_TXDONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_RXDONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_ENABLE_MITIGATION, mask); + rt2x00_set_field32(®, INT_MASK_CSR_MITIGATION_PERIOD, 0xff); + rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, MCU_INT_MASK_CSR, ®); + rt2x00_set_field32(®, MCU_INT_MASK_CSR_0, mask); + rt2x00_set_field32(®, MCU_INT_MASK_CSR_1, mask); + rt2x00_set_field32(®, MCU_INT_MASK_CSR_2, mask); + rt2x00_set_field32(®, MCU_INT_MASK_CSR_3, mask); + rt2x00_set_field32(®, MCU_INT_MASK_CSR_4, mask); + rt2x00_set_field32(®, MCU_INT_MASK_CSR_5, mask); + rt2x00_set_field32(®, MCU_INT_MASK_CSR_6, mask); + rt2x00_set_field32(®, MCU_INT_MASK_CSR_7, mask); + rt2x00pci_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg); +} + +static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + /* + * Initialize all registers. + */ + if (rt61pci_init_rings(rt2x00dev) || + rt61pci_init_registers(rt2x00dev) || + rt61pci_init_bbp(rt2x00dev)) { + ERROR(rt2x00dev, "Register initialization failed.\n"); + return -EIO; + } + + /* + * Enable interrupts. + */ + rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); + + /* + * Enable RX. + */ + rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, ®); + rt2x00_set_field32(®, RX_CNTL_CSR_ENABLE_RX_DMA, 1); + rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg); + + /* + * Enable LED + */ + rt61pci_enable_led(rt2x00dev); + + return 0; +} + +static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + /* + * Disable LED + */ + rt61pci_disable_led(rt2x00dev); + + rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818); + + /* + * Disable synchronisation. + */ + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); + + /* + * Cancel RX and TX. + */ + rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); + rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC0, 1); + rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC1, 1); + rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, 1); + rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, 1); + rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_MGMT, 1); + rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); + + /* + * Disable interrupts. + */ + rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF); +} + +static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) +{ + u32 reg; + unsigned int i; + char put_to_sleep; + char current_state; + + put_to_sleep = (state != STATE_AWAKE); + + rt2x00pci_register_read(rt2x00dev, MAC_CSR12, ®); + rt2x00_set_field32(®, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep); + rt2x00_set_field32(®, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep); + rt2x00pci_register_write(rt2x00dev, MAC_CSR12, reg); + + /* + * Device is not guaranteed to be in the requested state yet. + * We must wait until the register indicates that the + * device has entered the correct state. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00pci_register_read(rt2x00dev, MAC_CSR12, ®); + current_state = + rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); + if (current_state == !put_to_sleep) + return 0; + msleep(10); + } + + NOTICE(rt2x00dev, "Device failed to enter state %d, " + "current device state %d.\n", !put_to_sleep, current_state); + + return -EBUSY; +} + +static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int retval = 0; + + switch (state) { + case STATE_RADIO_ON: + retval = rt61pci_enable_radio(rt2x00dev); + break; + case STATE_RADIO_OFF: + rt61pci_disable_radio(rt2x00dev); + break; + case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_OFF: + rt61pci_toggle_rx(rt2x00dev, state); + break; + case STATE_DEEP_SLEEP: + case STATE_SLEEP: + case STATE_STANDBY: + case STATE_AWAKE: + retval = rt61pci_set_state(rt2x00dev, state); + break; + default: + retval = -ENOTSUPP; + break; + } + + return retval; +} + +/* + * TX descriptor initialization + */ +static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, + struct data_desc *txd, + struct data_entry_desc *desc, + struct ieee80211_hdr *ieee80211hdr, + unsigned int length, + struct ieee80211_tx_control *control) +{ + u32 word; + + /* + * Start writing the descriptor words. + */ + rt2x00_desc_read(txd, 1, &word); + rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue); + rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs); + rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min); + rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max); + rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); + rt2x00_desc_write(txd, 1, word); + + rt2x00_desc_read(txd, 2, &word); + rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal); + rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high); + rt2x00_desc_write(txd, 2, word); + + rt2x00_desc_read(txd, 5, &word); + rt2x00_set_field32(&word, TXD_W5_TX_POWER, + TXPOWER_TO_DEV(control->power_level)); + rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); + rt2x00_desc_write(txd, 5, word); + + rt2x00_desc_read(txd, 11, &word); + rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, length); + rt2x00_desc_write(txd, 11, word); + + rt2x00_desc_read(txd, 0, &word); + rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); + rt2x00_set_field32(&word, TXD_W0_VALID, 1); + rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, + test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_ACK, + !(control->flags & IEEE80211_TXCTL_NO_ACK)); + rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_OFDM, + test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); + rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, + !!(control->flags & + IEEE80211_TXCTL_LONG_RETRY_LIMIT)); + rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length); + rt2x00_set_field32(&word, TXD_W0_BURST, + test_bit(ENTRY_TXD_BURST, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); + rt2x00_desc_write(txd, 0, word); +} + +/* + * TX data initialization + */ +static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, + unsigned int queue) +{ + u32 reg; + + if (queue == IEEE80211_TX_QUEUE_BEACON) { + /* + * For Wi-Fi faily generated beacons between participating + * stations. Set TBTT phase adaptive adjustment step to 8us. + */ + rt2x00pci_register_write(rt2x00dev, TXRX_CSR10, 0x00001008); + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); + if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) { + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + } + return; + } + + rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); + if (queue == IEEE80211_TX_QUEUE_DATA0) + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, 1); + else if (queue == IEEE80211_TX_QUEUE_DATA1) + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, 1); + else if (queue == IEEE80211_TX_QUEUE_DATA2) + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, 1); + else if (queue == IEEE80211_TX_QUEUE_DATA3) + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, 1); + else if (queue == IEEE80211_TX_QUEUE_DATA4) + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_MGMT, 1); + rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); +} + +/* + * RX control handlers + */ +static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) +{ + u16 eeprom; + u8 offset; + u8 lna; + + lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA); + switch (lna) { + case 3: + offset = 90; + break; + case 2: + offset = 74; + break; + case 1: + offset = 64; + break; + default: + return 0; + } + + if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { + if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) + offset += 14; + + if (lna == 3 || lna == 2) + offset += 10; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); + offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); + } else { + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) + offset += 14; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); + offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); + } + + return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; +} + +static int rt61pci_fill_rxdone(struct data_entry *entry, + int *signal, int *rssi, int *ofdm, int *size) +{ + struct data_desc *rxd = entry->priv; + u32 word0; + u32 word1; + + rt2x00_desc_read(rxd, 0, &word0); + rt2x00_desc_read(rxd, 1, &word1); + + if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) || + rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR)) + return -EINVAL; + + /* + * Obtain the status about this packet. + */ + *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); + *rssi = rt61pci_agc_to_rssi(entry->ring->rt2x00dev, word1); + *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); + *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); + + return 0; +} + +/* + * Interrupt functions. + */ +static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring; + struct data_entry *entry; + struct data_desc *txd; + u32 word; + u32 reg; + u32 old_reg; + int type; + int index; + int tx_status; + int retry; + + /* + * During each loop we will compare the freshly read + * STA_CSR4 register value with the value read from + * the previous loop. If the 2 values are equal then + * we should stop processing because the chance it + * quite big that the device has been unplugged and + * we risk going into an endless loop. + */ + old_reg = 0; + + while (1) { + rt2x00pci_register_read(rt2x00dev, STA_CSR4, ®); + if (!rt2x00_get_field32(reg, STA_CSR4_VALID)) + break; + + if (old_reg == reg) + break; + old_reg = reg; + + /* + * Skip this entry when it contains an invalid + * ring identication number. + */ + type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE); + ring = rt2x00lib_get_ring(rt2x00dev, type); + if (unlikely(!ring)) + continue; + + /* + * Skip this entry when it contains an invalid + * index number. + */ + index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE); + if (unlikely(index >= ring->stats.limit)) + continue; + + entry = &ring->entry[index]; + txd = entry->priv; + rt2x00_desc_read(txd, 0, &word); + + if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || + !rt2x00_get_field32(word, TXD_W0_VALID)) + return; + + /* + * Obtain the status about this packet. + */ + tx_status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT); + retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT); + + rt2x00lib_txdone(entry, tx_status, retry); + + /* + * Make this entry available for reuse. + */ + entry->flags = 0; + rt2x00_set_field32(&word, TXD_W0_VALID, 0); + rt2x00_desc_write(txd, 0, word); + rt2x00_ring_index_done_inc(entry->ring); + + /* + * If the data ring was full before the txdone handler + * we must make sure the packet queue in the mac80211 stack + * is reenabled when the txdone handler has finished. + */ + if (!rt2x00_ring_full(ring)) + ieee80211_wake_queue(rt2x00dev->hw, + entry->tx_status.control.queue); + } +} + +static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance) +{ + struct rt2x00_dev *rt2x00dev = dev_instance; + u32 reg_mcu; + u32 reg; + + /* + * Get the interrupt sources & saved to local variable. + * Write register value back to clear pending interrupts. + */ + rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, ®_mcu); + rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu); + + rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); + rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); + + if (!reg && !reg_mcu) + return IRQ_NONE; + + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return IRQ_HANDLED; + + /* + * Handle interrupts, walk through all bits + * and run the tasks, the bits are checked in order of + * priority. + */ + + /* + * 1 - Rx ring done interrupt. + */ + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RXDONE)) + rt2x00pci_rxdone(rt2x00dev); + + /* + * 2 - Tx ring done interrupt. + */ + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TXDONE)) + rt61pci_txdone(rt2x00dev); + + /* + * 3 - Handle MCU command done. + */ + if (reg_mcu) + rt2x00pci_register_write(rt2x00dev, + M2H_CMD_DONE_CSR, 0xffffffff); + + return IRQ_HANDLED; +} + +/* + * Device probe functions. + */ +static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + struct eeprom_93cx6 eeprom; + u32 reg; + u16 word; + u8 *mac; + s8 value; + + rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); + + eeprom.data = rt2x00dev; + eeprom.register_read = rt61pci_eepromregister_read; + eeprom.register_write = rt61pci_eepromregister_write; + eeprom.width = rt2x00_get_field32(reg, E2PROM_CSR_TYPE_93C46) ? + PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; + eeprom.reg_data_in = 0; + eeprom.reg_data_out = 0; + eeprom.reg_data_clock = 0; + eeprom.reg_chip_select = 0; + + eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, + EEPROM_SIZE / sizeof(u16)); + + /* + * Start validation of the data that has been read. + */ + mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); + if (!is_valid_ether_addr(mac)) { + random_ether_addr(mac); + EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac)); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); + rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 2); + rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 2); + rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5225); + rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); + EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_NIC_ENABLE_DIVERSITY, 0); + rt2x00_set_field16(&word, EEPROM_NIC_TX_DIVERSITY, 0); + rt2x00_set_field16(&word, EEPROM_NIC_TX_RX_FIXED, 0); + rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); + rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); + EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_LED_LED_MODE, + LED_MODE_DEFAULT); + rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word); + EEPROM(rt2x00dev, "Led: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); + rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); + EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); + EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); + } else { + value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1); + if (value < -10 || value > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); + value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2); + if (value < -10 || value > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); + EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); + } else { + value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1); + if (value < -10 || value > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); + value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2); + if (value < -10 || value > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); + } + + return 0; +} + +static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 value; + u16 eeprom; + u16 device; + + /* + * Read EEPROM word for configuration. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + + /* + * Identify RF chipset. + * To determine the RT chip we have to read the + * PCI header of the device. + */ + pci_read_config_word(rt2x00dev_pci(rt2x00dev), + PCI_CONFIG_HEADER_DEVICE, &device); + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); + rt2x00_set_chip(rt2x00dev, device, value, reg); + + if (!rt2x00_rf(&rt2x00dev->chip, RF5225) && + !rt2x00_rf(&rt2x00dev->chip, RF5325) && + !rt2x00_rf(&rt2x00dev->chip, RF2527) && + !rt2x00_rf(&rt2x00dev->chip, RF2529)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } + + /* + * Identify default antenna configuration. + */ + rt2x00dev->hw->conf.antenna_sel_tx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); + rt2x00dev->hw->conf.antenna_sel_rx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); + + /* + * Read the Frame type. + */ + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE)) + __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags); + + /* + * Determine number of antenna's. + */ + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2) + __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags); + + /* + * Detect if this device has an hardware controlled radio. + */ + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) + __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags); + + /* + * Read frequency offset and RF programming sequence. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); + if (rt2x00_get_field16(eeprom, EEPROM_FREQ_SEQ)) + __set_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags); + + rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); + + /* + * Read external LNA informations. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); + + if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) + __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) + __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); + + /* + * Store led settings, for correct led behaviour. + * If the eeprom value is invalid, + * switch to default led mode. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); + + rt2x00dev->led_mode = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE); + + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE, + rt2x00dev->led_mode); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_GPIO_0)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_GPIO_1)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_GPIO_2)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_GPIO_3)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_GPIO_4)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT, + rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_RDY_G)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_RDY_A)); + + return 0; +} + +/* + * RF value list for RF5225 & RF5325 + * Supports: 2.4 GHz & 5.2 GHz, rf_sequence disabled + */ +static const struct rf_channel rf_vals_noseq[] = { + { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b }, + { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f }, + { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b }, + { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f }, + { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b }, + { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f }, + { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b }, + { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f }, + { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b }, + { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f }, + { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b }, + { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f }, + { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b }, + { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 }, + + /* 802.11 UNI / HyperLan 2 */ + { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 }, + { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 }, + { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b }, + { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 }, + { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b }, + { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 }, + { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 }, + { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b }, + + /* 802.11 HyperLan 2 */ + { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 }, + { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b }, + { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 }, + { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b }, + { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 }, + { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 }, + { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b }, + { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 }, + { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b }, + { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 }, + + /* 802.11 UNII */ + { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 }, + { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f }, + { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 }, + { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 }, + { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f }, + { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 }, + + /* MMAC(Japan)J52 ch 34,38,42,46 */ + { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b }, + { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 }, + { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b }, + { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 }, +}; + +/* + * RF value list for RF5225 & RF5325 + * Supports: 2.4 GHz & 5.2 GHz, rf_sequence enabled + */ +static const struct rf_channel rf_vals_seq[] = { + { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b }, + { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f }, + { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b }, + { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f }, + { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b }, + { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f }, + { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b }, + { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f }, + { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b }, + { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f }, + { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b }, + { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f }, + { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b }, + { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 }, + + /* 802.11 UNI / HyperLan 2 */ + { 36, 0x00002cd4, 0x0004481a, 0x00098455, 0x000c0a03 }, + { 40, 0x00002cd0, 0x00044682, 0x00098455, 0x000c0a03 }, + { 44, 0x00002cd0, 0x00044686, 0x00098455, 0x000c0a1b }, + { 48, 0x00002cd0, 0x0004468e, 0x00098655, 0x000c0a0b }, + { 52, 0x00002cd0, 0x00044692, 0x00098855, 0x000c0a23 }, + { 56, 0x00002cd0, 0x0004469a, 0x00098c55, 0x000c0a13 }, + { 60, 0x00002cd0, 0x000446a2, 0x00098e55, 0x000c0a03 }, + { 64, 0x00002cd0, 0x000446a6, 0x00099255, 0x000c0a1b }, + + /* 802.11 HyperLan 2 */ + { 100, 0x00002cd4, 0x0004489a, 0x000b9855, 0x000c0a03 }, + { 104, 0x00002cd4, 0x000448a2, 0x000b9855, 0x000c0a03 }, + { 108, 0x00002cd4, 0x000448aa, 0x000b9855, 0x000c0a03 }, + { 112, 0x00002cd4, 0x000448b2, 0x000b9a55, 0x000c0a03 }, + { 116, 0x00002cd4, 0x000448ba, 0x000b9a55, 0x000c0a03 }, + { 120, 0x00002cd0, 0x00044702, 0x000b9a55, 0x000c0a03 }, + { 124, 0x00002cd0, 0x00044706, 0x000b9a55, 0x000c0a1b }, + { 128, 0x00002cd0, 0x0004470e, 0x000b9c55, 0x000c0a0b }, + { 132, 0x00002cd0, 0x00044712, 0x000b9c55, 0x000c0a23 }, + { 136, 0x00002cd0, 0x0004471a, 0x000b9e55, 0x000c0a13 }, + + /* 802.11 UNII */ + { 140, 0x00002cd0, 0x00044722, 0x000b9e55, 0x000c0a03 }, + { 149, 0x00002cd0, 0x0004472e, 0x000ba255, 0x000c0a1b }, + { 153, 0x00002cd0, 0x00044736, 0x000ba255, 0x000c0a0b }, + { 157, 0x00002cd4, 0x0004490a, 0x000ba255, 0x000c0a17 }, + { 161, 0x00002cd4, 0x00044912, 0x000ba255, 0x000c0a17 }, + { 165, 0x00002cd4, 0x0004491a, 0x000ba255, 0x000c0a17 }, + + /* MMAC(Japan)J52 ch 34,38,42,46 */ + { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000c0a0b }, + { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000c0a13 }, + { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000c0a1b }, + { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 }, +}; + +static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +{ + struct hw_mode_spec *spec = &rt2x00dev->spec; + u8 *txpower; + unsigned int i; + + /* + * Initialize all hw fields. + */ + rt2x00dev->hw->flags = + IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_MONITOR_DURING_OPER | + IEEE80211_HW_NO_PROBE_FILTERING; + rt2x00dev->hw->extra_tx_headroom = 0; + rt2x00dev->hw->max_signal = MAX_SIGNAL; + rt2x00dev->hw->max_rssi = MAX_RX_SSI; + rt2x00dev->hw->queues = 5; + + SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, + rt2x00_eeprom_addr(rt2x00dev, + EEPROM_MAC_ADDR_0)); + + /* + * Convert tx_power array in eeprom. + */ + txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); + for (i = 0; i < 14; i++) + txpower[i] = TXPOWER_FROM_DEV(txpower[i]); + + /* + * Initialize hw_mode information. + */ + spec->num_modes = 2; + spec->num_rates = 12; + spec->tx_power_a = NULL; + spec->tx_power_bg = txpower; + spec->tx_power_default = DEFAULT_TXPOWER; + + if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) { + spec->num_channels = 14; + spec->channels = rf_vals_noseq; + } else { + spec->num_channels = 14; + spec->channels = rf_vals_seq; + } + + if (rt2x00_rf(&rt2x00dev->chip, RF5225) || + rt2x00_rf(&rt2x00dev->chip, RF5325)) { + spec->num_modes = 3; + spec->num_channels = ARRAY_SIZE(rf_vals_seq); + + txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); + for (i = 0; i < 14; i++) + txpower[i] = TXPOWER_FROM_DEV(txpower[i]); + + spec->tx_power_a = txpower; + } +} + +static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + int retval; + + /* + * Allocate eeprom data. + */ + retval = rt61pci_validate_eeprom(rt2x00dev); + if (retval) + return retval; + + retval = rt61pci_init_eeprom(rt2x00dev); + if (retval) + return retval; + + /* + * Initialize hw specifications. + */ + rt61pci_probe_hw_mode(rt2x00dev); + + /* + * This device requires firmware + */ + __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags); + + /* + * Set the rssi offset. + */ + rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + + return 0; +} + +/* + * IEEE80211 stack callback functions. + */ +static int rt61pci_set_retry_limit(struct ieee80211_hw *hw, + u32 short_retry, u32 long_retry) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u32 reg; + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); + rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry); + rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); + + return 0; +} + +static u64 rt61pci_get_tsf(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u64 tsf; + u32 reg; + + rt2x00pci_register_read(rt2x00dev, TXRX_CSR13, ®); + tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32; + rt2x00pci_register_read(rt2x00dev, TXRX_CSR12, ®); + tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER); + + return tsf; +} + +static void rt61pci_reset_tsf(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + rt2x00pci_register_write(rt2x00dev, TXRX_CSR12, 0); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR13, 0); +} + +int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *control) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * Just in case the ieee80211 doesn't set this, + * but we need this queue set for the descriptor + * initialization. + */ + control->queue = IEEE80211_TX_QUEUE_BEACON; + + /* + * We need to append the descriptor in front of the + * beacon frame. + */ + if (skb_headroom(skb) < TXD_DESC_SIZE) { + if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC)) { + dev_kfree_skb(skb); + return -ENOMEM; + } + } + + /* + * First we create the beacon. + */ + skb_push(skb, TXD_DESC_SIZE); + rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data, + (struct ieee80211_hdr *)(skb->data + + TXD_DESC_SIZE), + skb->len - TXD_DESC_SIZE, control); + + /* + * Write entire beacon with descriptor to register, + * and kick the beacon generator. + */ + rt2x00pci_register_multiwrite(rt2x00dev, HW_BEACON_BASE0, skb->data, skb->len); + rt61pci_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + + return 0; +} + +static const struct ieee80211_ops rt61pci_mac80211_ops = { + .tx = rt2x00mac_tx, + .add_interface = rt2x00mac_add_interface, + .remove_interface = rt2x00mac_remove_interface, + .config = rt2x00mac_config, + .config_interface = rt2x00mac_config_interface, + .set_multicast_list = rt2x00mac_set_multicast_list, + .get_stats = rt2x00mac_get_stats, + .set_retry_limit = rt61pci_set_retry_limit, + .conf_tx = rt2x00mac_conf_tx, + .get_tx_stats = rt2x00mac_get_tx_stats, + .get_tsf = rt61pci_get_tsf, + .reset_tsf = rt61pci_reset_tsf, + .beacon_update = rt61pci_beacon_update, +}; + +static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { + .irq_handler = rt61pci_interrupt, + .probe_hw = rt61pci_probe_hw, + .get_firmware_name = rt61pci_get_firmware_name, + .load_firmware = rt61pci_load_firmware, + .initialize = rt2x00pci_initialize, + .uninitialize = rt2x00pci_uninitialize, + .set_device_state = rt61pci_set_device_state, +#ifdef CONFIG_RT61PCI_RFKILL + .rfkill_poll = rt61pci_rfkill_poll, +#endif /* CONFIG_RT61PCI_RFKILL */ + .link_stats = rt61pci_link_stats, + .reset_tuner = rt61pci_reset_tuner, + .link_tuner = rt61pci_link_tuner, + .write_tx_desc = rt61pci_write_tx_desc, + .write_tx_data = rt2x00pci_write_tx_data, + .kick_tx_queue = rt61pci_kick_tx_queue, + .fill_rxdone = rt61pci_fill_rxdone, + .config_mac_addr = rt61pci_config_mac_addr, + .config_bssid = rt61pci_config_bssid, + .config_packet_filter = rt61pci_config_packet_filter, + .config_type = rt61pci_config_type, + .config = rt61pci_config, +}; + +static const struct rt2x00_ops rt61pci_ops = { + .name = DRV_NAME, + .rxd_size = RXD_DESC_SIZE, + .txd_size = TXD_DESC_SIZE, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .lib = &rt61pci_rt2x00_ops, + .hw = &rt61pci_mac80211_ops, +#ifdef CONFIG_RT2X00_LIB_DEBUGFS + .debugfs = &rt61pci_rt2x00debug, +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ +}; + +/* + * RT61pci module information. + */ +static struct pci_device_id rt61pci_device_table[] = { + /* RT2561s */ + { PCI_DEVICE(0x1814, 0x0301), PCI_DEVICE_DATA(&rt61pci_ops) }, + /* RT2561 v2 */ + { PCI_DEVICE(0x1814, 0x0302), PCI_DEVICE_DATA(&rt61pci_ops) }, + /* RT2661 */ + { PCI_DEVICE(0x1814, 0x0401), PCI_DEVICE_DATA(&rt61pci_ops) }, + { 0, } +}; + +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Ralink RT61 PCI & PCMCIA Wireless LAN driver."); +MODULE_SUPPORTED_DEVICE("Ralink RT2561, RT2561s & RT2661 " + "PCI & PCMCIA chipset based cards"); +MODULE_DEVICE_TABLE(pci, rt61pci_device_table); +MODULE_FIRMWARE(FIRMWARE_RT2561); +MODULE_FIRMWARE(FIRMWARE_RT2561s); +MODULE_FIRMWARE(FIRMWARE_RT2661); +MODULE_LICENSE("GPL"); + +static struct pci_driver rt61pci_driver = { + .name = DRV_NAME, + .id_table = rt61pci_device_table, + .probe = rt2x00pci_probe, + .remove = __devexit_p(rt2x00pci_remove), + .suspend = rt2x00pci_suspend, + .resume = rt2x00pci_resume, +}; + +static int __init rt61pci_init(void) +{ + return pci_register_driver(&rt61pci_driver); +} + +static void __exit rt61pci_exit(void) +{ + pci_unregister_driver(&rt61pci_driver); +} + +module_init(rt61pci_init); +module_exit(rt61pci_exit); diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h new file mode 100644 index 000000000000..6721d7dd32bc --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -0,0 +1,1457 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt61pci + Abstract: Data structures and registers for the rt61pci module. + Supported chipsets: RT2561, RT2561s, RT2661. + */ + +#ifndef RT61PCI_H +#define RT61PCI_H + +/* + * RF chip defines. + */ +#define RF5225 0x0001 +#define RF5325 0x0002 +#define RF2527 0x0003 +#define RF2529 0x0004 + +/* + * Signal information. + * Defaul offset is required for RSSI <-> dBm conversion. + */ +#define MAX_SIGNAL 100 +#define MAX_RX_SSI -1 +#define DEFAULT_RSSI_OFFSET 120 + +/* + * Register layout information. + */ +#define CSR_REG_BASE 0x3000 +#define CSR_REG_SIZE 0x04b0 +#define EEPROM_BASE 0x0000 +#define EEPROM_SIZE 0x0100 +#define BBP_SIZE 0x0080 +#define RF_SIZE 0x0014 + +/* + * PCI registers. + */ + +/* + * PCI Configuration Header + */ +#define PCI_CONFIG_HEADER_VENDOR 0x0000 +#define PCI_CONFIG_HEADER_DEVICE 0x0002 + +/* + * HOST_CMD_CSR: For HOST to interrupt embedded processor + */ +#define HOST_CMD_CSR 0x0008 +#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x0000007f) +#define HOST_CMD_CSR_INTERRUPT_MCU FIELD32(0x00000080) + +/* + * MCU_CNTL_CSR + * SELECT_BANK: Select 8051 program bank. + * RESET: Enable 8051 reset state. + * READY: Ready state for 8051. + */ +#define MCU_CNTL_CSR 0x000c +#define MCU_CNTL_CSR_SELECT_BANK FIELD32(0x00000001) +#define MCU_CNTL_CSR_RESET FIELD32(0x00000002) +#define MCU_CNTL_CSR_READY FIELD32(0x00000004) + +/* + * SOFT_RESET_CSR + */ +#define SOFT_RESET_CSR 0x0010 + +/* + * MCU_INT_SOURCE_CSR: MCU interrupt source/mask register. + */ +#define MCU_INT_SOURCE_CSR 0x0014 +#define MCU_INT_SOURCE_CSR_0 FIELD32(0x00000001) +#define MCU_INT_SOURCE_CSR_1 FIELD32(0x00000002) +#define MCU_INT_SOURCE_CSR_2 FIELD32(0x00000004) +#define MCU_INT_SOURCE_CSR_3 FIELD32(0x00000008) +#define MCU_INT_SOURCE_CSR_4 FIELD32(0x00000010) +#define MCU_INT_SOURCE_CSR_5 FIELD32(0x00000020) +#define MCU_INT_SOURCE_CSR_6 FIELD32(0x00000040) +#define MCU_INT_SOURCE_CSR_7 FIELD32(0x00000080) +#define MCU_INT_SOURCE_CSR_TWAKEUP FIELD32(0x00000100) +#define MCU_INT_SOURCE_CSR_TBTT_EXPIRE FIELD32(0x00000200) + +/* + * MCU_INT_MASK_CSR: MCU interrupt source/mask register. + */ +#define MCU_INT_MASK_CSR 0x0018 +#define MCU_INT_MASK_CSR_0 FIELD32(0x00000001) +#define MCU_INT_MASK_CSR_1 FIELD32(0x00000002) +#define MCU_INT_MASK_CSR_2 FIELD32(0x00000004) +#define MCU_INT_MASK_CSR_3 FIELD32(0x00000008) +#define MCU_INT_MASK_CSR_4 FIELD32(0x00000010) +#define MCU_INT_MASK_CSR_5 FIELD32(0x00000020) +#define MCU_INT_MASK_CSR_6 FIELD32(0x00000040) +#define MCU_INT_MASK_CSR_7 FIELD32(0x00000080) +#define MCU_INT_MASK_CSR_TWAKEUP FIELD32(0x00000100) +#define MCU_INT_MASK_CSR_TBTT_EXPIRE FIELD32(0x00000200) + +/* + * PCI_USEC_CSR + */ +#define PCI_USEC_CSR 0x001c + +/* + * Security key table memory. + * 16 entries 32-byte for shared key table + * 64 entries 32-byte for pairwise key table + * 64 entries 8-byte for pairwise ta key table + */ +#define SHARED_KEY_TABLE_BASE 0x1000 +#define PAIRWISE_KEY_TABLE_BASE 0x1200 +#define PAIRWISE_TA_TABLE_BASE 0x1a00 + +struct hw_key_entry { + u8 key[16]; + u8 tx_mic[8]; + u8 rx_mic[8]; +} __attribute__ ((packed)); + +struct hw_pairwise_ta_entry { + u8 address[6]; + u8 reserved[2]; +} __attribute__ ((packed)); + +/* + * Other on-chip shared memory space. + */ +#define HW_CIS_BASE 0x2000 +#define HW_NULL_BASE 0x2b00 + +/* + * Since NULL frame won't be that long (256 byte), + * We steal 16 tail bytes to save debugging settings. + */ +#define HW_DEBUG_SETTING_BASE 0x2bf0 + +/* + * On-chip BEACON frame space. + */ +#define HW_BEACON_BASE0 0x2c00 +#define HW_BEACON_BASE1 0x2d00 +#define HW_BEACON_BASE2 0x2e00 +#define HW_BEACON_BASE3 0x2f00 +#define HW_BEACON_OFFSET 0x0100 + +/* + * HOST-MCU shared memory. + */ + +/* + * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. + */ +#define H2M_MAILBOX_CSR 0x2100 +#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) +#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) +#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) +#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) + +/* + * MCU_LEDCS: LED control for MCU Mailbox. + */ +#define MCU_LEDCS_LED_MODE FIELD16(0x001f) +#define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020) +#define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040) +#define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080) +#define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100) +#define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200) +#define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400) +#define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800) +#define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000) +#define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000) +#define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000) +#define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000) + +/* + * M2H_CMD_DONE_CSR. + */ +#define M2H_CMD_DONE_CSR 0x2104 + +/* + * MCU_TXOP_ARRAY_BASE. + */ +#define MCU_TXOP_ARRAY_BASE 0x2110 + +/* + * MAC Control/Status Registers(CSR). + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * MAC_CSR0: ASIC revision number. + */ +#define MAC_CSR0 0x3000 + +/* + * MAC_CSR1: System control register. + * SOFT_RESET: Software reset bit, 1: reset, 0: normal. + * BBP_RESET: Hardware reset BBP. + * HOST_READY: Host is ready after initialization, 1: ready. + */ +#define MAC_CSR1 0x3004 +#define MAC_CSR1_SOFT_RESET FIELD32(0x00000001) +#define MAC_CSR1_BBP_RESET FIELD32(0x00000002) +#define MAC_CSR1_HOST_READY FIELD32(0x00000004) + +/* + * MAC_CSR2: STA MAC register 0. + */ +#define MAC_CSR2 0x3008 +#define MAC_CSR2_BYTE0 FIELD32(0x000000ff) +#define MAC_CSR2_BYTE1 FIELD32(0x0000ff00) +#define MAC_CSR2_BYTE2 FIELD32(0x00ff0000) +#define MAC_CSR2_BYTE3 FIELD32(0xff000000) + +/* + * MAC_CSR3: STA MAC register 1. + */ +#define MAC_CSR3 0x300c +#define MAC_CSR3_BYTE4 FIELD32(0x000000ff) +#define MAC_CSR3_BYTE5 FIELD32(0x0000ff00) +#define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) + +/* + * MAC_CSR4: BSSID register 0. + */ +#define MAC_CSR4 0x3010 +#define MAC_CSR4_BYTE0 FIELD32(0x000000ff) +#define MAC_CSR4_BYTE1 FIELD32(0x0000ff00) +#define MAC_CSR4_BYTE2 FIELD32(0x00ff0000) +#define MAC_CSR4_BYTE3 FIELD32(0xff000000) + +/* + * MAC_CSR5: BSSID register 1. + * BSS_ID_MASK: 3: one BSSID, 0: 4 BSSID, 2 or 1: 2 BSSID. + */ +#define MAC_CSR5 0x3014 +#define MAC_CSR5_BYTE4 FIELD32(0x000000ff) +#define MAC_CSR5_BYTE5 FIELD32(0x0000ff00) +#define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000) + +/* + * MAC_CSR6: Maximum frame length register. + */ +#define MAC_CSR6 0x3018 +#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff) + +/* + * MAC_CSR7: Reserved + */ +#define MAC_CSR7 0x301c + +/* + * MAC_CSR8: SIFS/EIFS register. + * All units are in US. + */ +#define MAC_CSR8 0x3020 +#define MAC_CSR8_SIFS FIELD32(0x000000ff) +#define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00) +#define MAC_CSR8_EIFS FIELD32(0xffff0000) + +/* + * MAC_CSR9: Back-Off control register. + * SLOT_TIME: Slot time, default is 20us for 802.11BG. + * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1). + * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1). + * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD. + */ +#define MAC_CSR9 0x3024 +#define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff) +#define MAC_CSR9_CWMIN FIELD32(0x00000f00) +#define MAC_CSR9_CWMAX FIELD32(0x0000f000) +#define MAC_CSR9_CW_SELECT FIELD32(0x00010000) + +/* + * MAC_CSR10: Power state configuration. + */ +#define MAC_CSR10 0x3028 + +/* + * MAC_CSR11: Power saving transition time register. + * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU. + * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. + * WAKEUP_LATENCY: In unit of TU. + */ +#define MAC_CSR11 0x302c +#define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff) +#define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00) +#define MAC_CSR11_AUTOWAKE FIELD32(0x00008000) +#define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000) + +/* + * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1). + * CURRENT_STATE: 0:sleep, 1:awake. + * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP. + * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake. + */ +#define MAC_CSR12 0x3030 +#define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001) +#define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002) +#define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004) +#define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008) + +/* + * MAC_CSR13: GPIO. + */ +#define MAC_CSR13 0x3034 +#define MAC_CSR13_BIT0 FIELD32(0x00000001) +#define MAC_CSR13_BIT1 FIELD32(0x00000002) +#define MAC_CSR13_BIT2 FIELD32(0x00000004) +#define MAC_CSR13_BIT3 FIELD32(0x00000008) +#define MAC_CSR13_BIT4 FIELD32(0x00000010) +#define MAC_CSR13_BIT5 FIELD32(0x00000020) +#define MAC_CSR13_BIT6 FIELD32(0x00000040) +#define MAC_CSR13_BIT7 FIELD32(0x00000080) +#define MAC_CSR13_BIT8 FIELD32(0x00000100) +#define MAC_CSR13_BIT9 FIELD32(0x00000200) +#define MAC_CSR13_BIT10 FIELD32(0x00000400) +#define MAC_CSR13_BIT11 FIELD32(0x00000800) +#define MAC_CSR13_BIT12 FIELD32(0x00001000) + +/* + * MAC_CSR14: LED control register. + * ON_PERIOD: On period, default 70ms. + * OFF_PERIOD: Off period, default 30ms. + * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON. + * SW_LED: s/w LED, 1: ON, 0: OFF. + * HW_LED_POLARITY: 0: active low, 1: active high. + */ +#define MAC_CSR14 0x3038 +#define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff) +#define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00) +#define MAC_CSR14_HW_LED FIELD32(0x00010000) +#define MAC_CSR14_SW_LED FIELD32(0x00020000) +#define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000) +#define MAC_CSR14_SW_LED2 FIELD32(0x00080000) + +/* + * MAC_CSR15: NAV control. + */ +#define MAC_CSR15 0x303c + +/* + * TXRX control registers. + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * TXRX_CSR0: TX/RX configuration register. + * TSF_OFFSET: Default is 24. + * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame. + * DISABLE_RX: Disable Rx engine. + * DROP_CRC: Drop CRC error. + * DROP_PHYSICAL: Drop physical error. + * DROP_CONTROL: Drop control frame. + * DROP_NOT_TO_ME: Drop not to me unicast frame. + * DROP_TO_DS: Drop fram ToDs bit is true. + * DROP_VERSION_ERROR: Drop version error frame. + * DROP_MULTICAST: Drop multicast frames. + * DROP_BORADCAST: Drop broadcast frames. + * ROP_ACK_CTS: Drop received ACK and CTS. + */ +#define TXRX_CSR0 0x3040 +#define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff) +#define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00) +#define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000) +#define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000) +#define TXRX_CSR0_DROP_CRC FIELD32(0x00020000) +#define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000) +#define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000) +#define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000) +#define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000) +#define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000) +#define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000) +#define TXRX_CSR0_DROP_BORADCAST FIELD32(0x01000000) +#define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000) +#define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000) + +/* + * TXRX_CSR1 + */ +#define TXRX_CSR1 0x3044 +#define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f) +#define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080) +#define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00) +#define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000) +#define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000) +#define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000) +#define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000) +#define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000) + +/* + * TXRX_CSR2 + */ +#define TXRX_CSR2 0x3048 +#define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f) +#define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080) +#define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00) +#define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000) +#define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000) +#define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000) +#define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000) +#define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000) + +/* + * TXRX_CSR3 + */ +#define TXRX_CSR3 0x304c +#define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f) +#define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080) +#define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00) +#define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000) +#define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000) +#define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000) +#define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000) +#define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000) + +/* + * TXRX_CSR4: Auto-Responder/Tx-retry register. + * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble. + * OFDM_TX_RATE_DOWN: 1:enable. + * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step. + * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M. + */ +#define TXRX_CSR4 0x3050 +#define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff) +#define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700) +#define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000) +#define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000) +#define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000) +#define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000) +#define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000) +#define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000) +#define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000) +#define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000) + +/* + * TXRX_CSR5 + */ +#define TXRX_CSR5 0x3054 + +/* + * TXRX_CSR6: ACK/CTS payload consumed time + */ +#define TXRX_CSR6 0x3058 + +/* + * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps. + */ +#define TXRX_CSR7 0x305c +#define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff) +#define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00) +#define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000) +#define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000) + +/* + * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps. + */ +#define TXRX_CSR8 0x3060 +#define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff) +#define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00) +#define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000) +#define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000) + +/* + * TXRX_CSR9: Synchronization control register. + * BEACON_INTERVAL: In unit of 1/16 TU. + * TSF_TICKING: Enable TSF auto counting. + * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. + * BEACON_GEN: Enable beacon generator. + */ +#define TXRX_CSR9 0x3064 +#define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff) +#define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000) +#define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000) +#define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000) +#define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000) +#define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000) + +/* + * TXRX_CSR10: BEACON alignment. + */ +#define TXRX_CSR10 0x3068 + +/* + * TXRX_CSR11: AES mask. + */ +#define TXRX_CSR11 0x306c + +/* + * TXRX_CSR12: TSF low 32. + */ +#define TXRX_CSR12 0x3070 +#define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff) + +/* + * TXRX_CSR13: TSF high 32. + */ +#define TXRX_CSR13 0x3074 +#define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff) + +/* + * TXRX_CSR14: TBTT timer. + */ +#define TXRX_CSR14 0x3078 + +/* + * TXRX_CSR15: TKIP MIC priority byte "AND" mask. + */ +#define TXRX_CSR15 0x307c + +/* + * PHY control registers. + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * PHY_CSR0: RF/PS control. + */ +#define PHY_CSR0 0x3080 +#define PHY_CSR0_PA_PE_BG FIELD32(0x00010000) +#define PHY_CSR0_PA_PE_A FIELD32(0x00020000) + +/* + * PHY_CSR1 + */ +#define PHY_CSR1 0x3084 + +/* + * PHY_CSR2: Pre-TX BBP control. + */ +#define PHY_CSR2 0x3088 + +/* + * PHY_CSR3: BBP serial control register. + * VALUE: Register value to program into BBP. + * REG_NUM: Selected BBP register. + * READ_CONTROL: 0: Write BBP, 1: Read BBP. + * BUSY: 1: ASIC is busy execute BBP programming. + */ +#define PHY_CSR3 0x308c +#define PHY_CSR3_VALUE FIELD32(0x000000ff) +#define PHY_CSR3_REGNUM FIELD32(0x00007f00) +#define PHY_CSR3_READ_CONTROL FIELD32(0x00008000) +#define PHY_CSR3_BUSY FIELD32(0x00010000) + +/* + * PHY_CSR4: RF serial control register + * VALUE: Register value (include register id) serial out to RF/IF chip. + * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22). + * IF_SELECT: 1: select IF to program, 0: select RF to program. + * PLL_LD: RF PLL_LD status. + * BUSY: 1: ASIC is busy execute RF programming. + */ +#define PHY_CSR4 0x3090 +#define PHY_CSR4_VALUE FIELD32(0x00ffffff) +#define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000) +#define PHY_CSR4_IF_SELECT FIELD32(0x20000000) +#define PHY_CSR4_PLL_LD FIELD32(0x40000000) +#define PHY_CSR4_BUSY FIELD32(0x80000000) + +/* + * PHY_CSR5: RX to TX signal switch timing control. + */ +#define PHY_CSR5 0x3094 +#define PHY_CSR5_IQ_FLIP FIELD32(0x00000004) + +/* + * PHY_CSR6: TX to RX signal timing control. + */ +#define PHY_CSR6 0x3098 +#define PHY_CSR6_IQ_FLIP FIELD32(0x00000004) + +/* + * PHY_CSR7: TX DAC switching timing control. + */ +#define PHY_CSR7 0x309c + +/* + * Security control register. + */ + +/* + * SEC_CSR0: Shared key table control. + */ +#define SEC_CSR0 0x30a0 +#define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001) +#define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002) +#define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004) +#define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008) +#define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010) +#define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020) +#define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040) +#define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080) +#define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100) +#define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200) +#define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400) +#define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800) +#define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000) +#define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000) +#define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000) +#define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000) + +/* + * SEC_CSR1: Shared key table security mode register. + */ +#define SEC_CSR1 0x30a4 +#define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007) +#define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070) +#define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700) +#define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000) +#define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000) +#define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000) +#define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000) +#define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000) + +/* + * Pairwise key table valid bitmap registers. + * SEC_CSR2: pairwise key table valid bitmap 0. + * SEC_CSR3: pairwise key table valid bitmap 1. + */ +#define SEC_CSR2 0x30a8 +#define SEC_CSR3 0x30ac + +/* + * SEC_CSR4: Pairwise key table lookup control. + */ +#define SEC_CSR4 0x30b0 + +/* + * SEC_CSR5: shared key table security mode register. + */ +#define SEC_CSR5 0x30b4 +#define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007) +#define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070) +#define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700) +#define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000) +#define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000) +#define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000) +#define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000) +#define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000) + +/* + * STA control registers. + */ + +/* + * STA_CSR0: RX PLCP error count & RX FCS error count. + */ +#define STA_CSR0 0x30c0 +#define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff) +#define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000) + +/* + * STA_CSR1: RX False CCA count & RX LONG frame count. + */ +#define STA_CSR1 0x30c4 +#define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff) +#define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000) + +/* + * STA_CSR2: TX Beacon count and RX FIFO overflow count. + */ +#define STA_CSR2 0x30c8 +#define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff) +#define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000) + +/* + * STA_CSR3: TX Beacon count. + */ +#define STA_CSR3 0x30cc +#define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff) + +/* + * STA_CSR4: TX Result status register. + * VALID: 1:This register contains a valid TX result. + */ +#define STA_CSR4 0x30d0 +#define STA_CSR4_VALID FIELD32(0x00000001) +#define STA_CSR4_TX_RESULT FIELD32(0x0000000e) +#define STA_CSR4_RETRY_COUNT FIELD32(0x000000f0) +#define STA_CSR4_PID_SUBTYPE FIELD32(0x00001f00) +#define STA_CSR4_PID_TYPE FIELD32(0x0000e000) +#define STA_CSR4_TXRATE FIELD32(0x000f0000) + +/* + * QOS control registers. + */ + +/* + * QOS_CSR0: TXOP holder MAC address register. + */ +#define QOS_CSR0 0x30e0 +#define QOS_CSR0_BYTE0 FIELD32(0x000000ff) +#define QOS_CSR0_BYTE1 FIELD32(0x0000ff00) +#define QOS_CSR0_BYTE2 FIELD32(0x00ff0000) +#define QOS_CSR0_BYTE3 FIELD32(0xff000000) + +/* + * QOS_CSR1: TXOP holder MAC address register. + */ +#define QOS_CSR1 0x30e4 +#define QOS_CSR1_BYTE4 FIELD32(0x000000ff) +#define QOS_CSR1_BYTE5 FIELD32(0x0000ff00) + +/* + * QOS_CSR2: TXOP holder timeout register. + */ +#define QOS_CSR2 0x30e8 + +/* + * RX QOS-CFPOLL MAC address register. + * QOS_CSR3: RX QOS-CFPOLL MAC address 0. + * QOS_CSR4: RX QOS-CFPOLL MAC address 1. + */ +#define QOS_CSR3 0x30ec +#define QOS_CSR4 0x30f0 + +/* + * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL. + */ +#define QOS_CSR5 0x30f4 + +/* + * Host DMA registers. + */ + +/* + * AC0_BASE_CSR: AC_BK base address. + */ +#define AC0_BASE_CSR 0x3400 +#define AC0_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) + +/* + * AC1_BASE_CSR: AC_BE base address. + */ +#define AC1_BASE_CSR 0x3404 +#define AC1_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) + +/* + * AC2_BASE_CSR: AC_VI base address. + */ +#define AC2_BASE_CSR 0x3408 +#define AC2_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) + +/* + * AC3_BASE_CSR: AC_VO base address. + */ +#define AC3_BASE_CSR 0x340c +#define AC3_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) + +/* + * MGMT_BASE_CSR: MGMT ring base address. + */ +#define MGMT_BASE_CSR 0x3410 +#define MGMT_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) + +/* + * TX_RING_CSR0: TX Ring size for AC_BK, AC_BE, AC_VI, AC_VO. + */ +#define TX_RING_CSR0 0x3418 +#define TX_RING_CSR0_AC0_RING_SIZE FIELD32(0x000000ff) +#define TX_RING_CSR0_AC1_RING_SIZE FIELD32(0x0000ff00) +#define TX_RING_CSR0_AC2_RING_SIZE FIELD32(0x00ff0000) +#define TX_RING_CSR0_AC3_RING_SIZE FIELD32(0xff000000) + +/* + * TX_RING_CSR1: TX Ring size for MGMT Ring, HCCA Ring + * TXD_SIZE: In unit of 32-bit. + */ +#define TX_RING_CSR1 0x341c +#define TX_RING_CSR1_MGMT_RING_SIZE FIELD32(0x000000ff) +#define TX_RING_CSR1_HCCA_RING_SIZE FIELD32(0x0000ff00) +#define TX_RING_CSR1_TXD_SIZE FIELD32(0x003f0000) + +/* + * AIFSN_CSR: AIFSN for each EDCA AC. + * AIFSN0: For AC_BK. + * AIFSN1: For AC_BE. + * AIFSN2: For AC_VI. + * AIFSN3: For AC_VO. + */ +#define AIFSN_CSR 0x3420 +#define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f) +#define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0) +#define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00) +#define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000) + +/* + * CWMIN_CSR: CWmin for each EDCA AC. + * CWMIN0: For AC_BK. + * CWMIN1: For AC_BE. + * CWMIN2: For AC_VI. + * CWMIN3: For AC_VO. + */ +#define CWMIN_CSR 0x3424 +#define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f) +#define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0) +#define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00) +#define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000) + +/* + * CWMAX_CSR: CWmax for each EDCA AC. + * CWMAX0: For AC_BK. + * CWMAX1: For AC_BE. + * CWMAX2: For AC_VI. + * CWMAX3: For AC_VO. + */ +#define CWMAX_CSR 0x3428 +#define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f) +#define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0) +#define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00) +#define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000) + +/* + * TX_DMA_DST_CSR: TX DMA destination + * 0: TX ring0, 1: TX ring1, 2: TX ring2 3: invalid + */ +#define TX_DMA_DST_CSR 0x342c +#define TX_DMA_DST_CSR_DEST_AC0 FIELD32(0x00000003) +#define TX_DMA_DST_CSR_DEST_AC1 FIELD32(0x0000000c) +#define TX_DMA_DST_CSR_DEST_AC2 FIELD32(0x00000030) +#define TX_DMA_DST_CSR_DEST_AC3 FIELD32(0x000000c0) +#define TX_DMA_DST_CSR_DEST_MGMT FIELD32(0x00000300) + +/* + * TX_CNTL_CSR: KICK/Abort TX. + * KICK_TX_AC0: For AC_BK. + * KICK_TX_AC1: For AC_BE. + * KICK_TX_AC2: For AC_VI. + * KICK_TX_AC3: For AC_VO. + * ABORT_TX_AC0: For AC_BK. + * ABORT_TX_AC1: For AC_BE. + * ABORT_TX_AC2: For AC_VI. + * ABORT_TX_AC3: For AC_VO. + */ +#define TX_CNTL_CSR 0x3430 +#define TX_CNTL_CSR_KICK_TX_AC0 FIELD32(0x00000001) +#define TX_CNTL_CSR_KICK_TX_AC1 FIELD32(0x00000002) +#define TX_CNTL_CSR_KICK_TX_AC2 FIELD32(0x00000004) +#define TX_CNTL_CSR_KICK_TX_AC3 FIELD32(0x00000008) +#define TX_CNTL_CSR_KICK_TX_MGMT FIELD32(0x00000010) +#define TX_CNTL_CSR_ABORT_TX_AC0 FIELD32(0x00010000) +#define TX_CNTL_CSR_ABORT_TX_AC1 FIELD32(0x00020000) +#define TX_CNTL_CSR_ABORT_TX_AC2 FIELD32(0x00040000) +#define TX_CNTL_CSR_ABORT_TX_AC3 FIELD32(0x00080000) +#define TX_CNTL_CSR_ABORT_TX_MGMT FIELD32(0x00100000) + +/* + * LOAD_TX_RING_CSR: Load RX de + */ +#define LOAD_TX_RING_CSR 0x3434 +#define LOAD_TX_RING_CSR_LOAD_TXD_AC0 FIELD32(0x00000001) +#define LOAD_TX_RING_CSR_LOAD_TXD_AC1 FIELD32(0x00000002) +#define LOAD_TX_RING_CSR_LOAD_TXD_AC2 FIELD32(0x00000004) +#define LOAD_TX_RING_CSR_LOAD_TXD_AC3 FIELD32(0x00000008) +#define LOAD_TX_RING_CSR_LOAD_TXD_MGMT FIELD32(0x00000010) + +/* + * Several read-only registers, for debugging. + */ +#define AC0_TXPTR_CSR 0x3438 +#define AC1_TXPTR_CSR 0x343c +#define AC2_TXPTR_CSR 0x3440 +#define AC3_TXPTR_CSR 0x3444 +#define MGMT_TXPTR_CSR 0x3448 + +/* + * RX_BASE_CSR + */ +#define RX_BASE_CSR 0x3450 +#define RX_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) + +/* + * RX_RING_CSR. + * RXD_SIZE: In unit of 32-bit. + */ +#define RX_RING_CSR 0x3454 +#define RX_RING_CSR_RING_SIZE FIELD32(0x000000ff) +#define RX_RING_CSR_RXD_SIZE FIELD32(0x00003f00) +#define RX_RING_CSR_RXD_WRITEBACK_SIZE FIELD32(0x00070000) + +/* + * RX_CNTL_CSR + */ +#define RX_CNTL_CSR 0x3458 +#define RX_CNTL_CSR_ENABLE_RX_DMA FIELD32(0x00000001) +#define RX_CNTL_CSR_LOAD_RXD FIELD32(0x00000002) + +/* + * RXPTR_CSR: Read-only, for debugging. + */ +#define RXPTR_CSR 0x345c + +/* + * PCI_CFG_CSR + */ +#define PCI_CFG_CSR 0x3460 + +/* + * BUF_FORMAT_CSR + */ +#define BUF_FORMAT_CSR 0x3464 + +/* + * INT_SOURCE_CSR: Interrupt source register. + * Write one to clear corresponding bit. + */ +#define INT_SOURCE_CSR 0x3468 +#define INT_SOURCE_CSR_TXDONE FIELD32(0x00000001) +#define INT_SOURCE_CSR_RXDONE FIELD32(0x00000002) +#define INT_SOURCE_CSR_BEACON_DONE FIELD32(0x00000004) +#define INT_SOURCE_CSR_TX_ABORT_DONE FIELD32(0x00000010) +#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00010000) +#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00020000) +#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00040000) +#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00080000) +#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00100000) +#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00200000) + +/* + * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. + * MITIGATION_PERIOD: Interrupt mitigation in unit of 32 PCI clock. + */ +#define INT_MASK_CSR 0x346c +#define INT_MASK_CSR_TXDONE FIELD32(0x00000001) +#define INT_MASK_CSR_RXDONE FIELD32(0x00000002) +#define INT_MASK_CSR_BEACON_DONE FIELD32(0x00000004) +#define INT_MASK_CSR_TX_ABORT_DONE FIELD32(0x00000010) +#define INT_MASK_CSR_ENABLE_MITIGATION FIELD32(0x00000080) +#define INT_MASK_CSR_MITIGATION_PERIOD FIELD32(0x0000ff00) +#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00010000) +#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00020000) +#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00040000) +#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00080000) +#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00100000) +#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00200000) + +/* + * E2PROM_CSR: EEPROM control register. + * RELOAD: Write 1 to reload eeprom content. + * TYPE_93C46: 1: 93c46, 0:93c66. + * LOAD_STATUS: 1:loading, 0:done. + */ +#define E2PROM_CSR 0x3470 +#define E2PROM_CSR_RELOAD FIELD32(0x00000001) +#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000002) +#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000004) +#define E2PROM_CSR_DATA_IN FIELD32(0x00000008) +#define E2PROM_CSR_DATA_OUT FIELD32(0x00000010) +#define E2PROM_CSR_TYPE_93C46 FIELD32(0x00000020) +#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) + +/* + * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register. + * AC0_TX_OP: For AC_BK, in unit of 32us. + * AC1_TX_OP: For AC_BE, in unit of 32us. + */ +#define AC_TXOP_CSR0 0x3474 +#define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff) +#define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000) + +/* + * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register. + * AC2_TX_OP: For AC_VI, in unit of 32us. + * AC3_TX_OP: For AC_VO, in unit of 32us. + */ +#define AC_TXOP_CSR1 0x3478 +#define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff) +#define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000) + +/* + * DMA_STATUS_CSR + */ +#define DMA_STATUS_CSR 0x3480 + +/* + * TEST_MODE_CSR + */ +#define TEST_MODE_CSR 0x3484 + +/* + * UART0_TX_CSR + */ +#define UART0_TX_CSR 0x3488 + +/* + * UART0_RX_CSR + */ +#define UART0_RX_CSR 0x348c + +/* + * UART0_FRAME_CSR + */ +#define UART0_FRAME_CSR 0x3490 + +/* + * UART0_BUFFER_CSR + */ +#define UART0_BUFFER_CSR 0x3494 + +/* + * IO_CNTL_CSR + */ +#define IO_CNTL_CSR 0x3498 + +/* + * UART_INT_SOURCE_CSR + */ +#define UART_INT_SOURCE_CSR 0x34a8 + +/* + * UART_INT_MASK_CSR + */ +#define UART_INT_MASK_CSR 0x34ac + +/* + * PBF_QUEUE_CSR + */ +#define PBF_QUEUE_CSR 0x34b0 + +/* + * Firmware DMA registers. + * Firmware DMA registers are dedicated for MCU usage + * and should not be touched by host driver. + * Therefore we skip the definition of these registers. + */ +#define FW_TX_BASE_CSR 0x34c0 +#define FW_TX_START_CSR 0x34c4 +#define FW_TX_LAST_CSR 0x34c8 +#define FW_MODE_CNTL_CSR 0x34cc +#define FW_TXPTR_CSR 0x34d0 + +/* + * 8051 firmware image. + */ +#define FIRMWARE_RT2561 "rt2561.bin" +#define FIRMWARE_RT2561s "rt2561s.bin" +#define FIRMWARE_RT2661 "rt2661.bin" +#define FIRMWARE_IMAGE_BASE 0x4000 + +/* + * BBP registers. + * The wordsize of the BBP is 8 bits. + */ + +/* + * R2 + */ +#define BBP_R2_BG_MODE FIELD8(0x20) + +/* + * R3 + */ +#define BBP_R3_SMART_MODE FIELD8(0x01) + +/* + * R4: RX antenna control + * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529) + */ +#define BBP_R4_RX_ANTENNA FIELD8(0x03) +#define BBP_R4_RX_FRAME_END FIELD8(0x20) + +/* + * R77 + */ +#define BBP_R77_PAIR FIELD8(0x03) + +/* + * RF registers + */ + +/* + * RF 3 + */ +#define RF3_TXPOWER FIELD32(0x00003e00) + +/* + * RF 4 + */ +#define RF4_FREQ_OFFSET FIELD32(0x0003f000) + +/* + * EEPROM content. + * The wordsize of the EEPROM is 16 bits. + */ + +/* + * HW MAC address. + */ +#define EEPROM_MAC_ADDR_0 0x0002 +#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) +#define EEPROM_MAC_ADDR1 0x0004 +#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) +#define EEPROM_MAC_ADDR_2 0x0006 +#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) + +/* + * EEPROM antenna. + * ANTENNA_NUM: Number of antenna's. + * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. + * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. + * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only. + * DYN_TXAGC: Dynamic TX AGC control. + * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. + * RF_TYPE: Rf_type of this adapter. + */ +#define EEPROM_ANTENNA 0x0010 +#define EEPROM_ANTENNA_NUM FIELD16(0x0003) +#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) +#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) +#define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040) +#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) +#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) +#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) + +/* + * EEPROM NIC config. + * ENABLE_DIVERSITY: 1:enable, 0:disable. + * EXTERNAL_LNA_BG: External LNA enable for 2.4G. + * CARDBUS_ACCEL: 0:enable, 1:disable. + * EXTERNAL_LNA_A: External LNA enable for 5G. + */ +#define EEPROM_NIC 0x0011 +#define EEPROM_NIC_ENABLE_DIVERSITY FIELD16(0x0001) +#define EEPROM_NIC_TX_DIVERSITY FIELD16(0x0002) +#define EEPROM_NIC_TX_RX_FIXED FIELD16(0x000c) +#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0010) +#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0020) +#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0040) + +/* + * EEPROM geography. + * GEO_A: Default geographical setting for 5GHz band + * GEO: Default geographical setting. + */ +#define EEPROM_GEOGRAPHY 0x0012 +#define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff) +#define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00) + +/* + * EEPROM BBP. + */ +#define EEPROM_BBP_START 0x0013 +#define EEPROM_BBP_SIZE 16 +#define EEPROM_BBP_VALUE FIELD16(0x00ff) +#define EEPROM_BBP_REG_ID FIELD16(0xff00) + +/* + * EEPROM TXPOWER 802.11G + */ +#define EEPROM_TXPOWER_G_START 0x0023 +#define EEPROM_TXPOWER_G_SIZE 7 +#define EEPROM_TXPOWER_G_1 FIELD16(0x00ff) +#define EEPROM_TXPOWER_G_2 FIELD16(0xff00) + +/* + * EEPROM Frequency + */ +#define EEPROM_FREQ 0x002f +#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) +#define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00) +#define EEPROM_FREQ_SEQ FIELD16(0x0300) + +/* + * EEPROM LED. + * POLARITY_RDY_G: Polarity RDY_G setting. + * POLARITY_RDY_A: Polarity RDY_A setting. + * POLARITY_ACT: Polarity ACT setting. + * POLARITY_GPIO_0: Polarity GPIO0 setting. + * POLARITY_GPIO_1: Polarity GPIO1 setting. + * POLARITY_GPIO_2: Polarity GPIO2 setting. + * POLARITY_GPIO_3: Polarity GPIO3 setting. + * POLARITY_GPIO_4: Polarity GPIO4 setting. + * LED_MODE: Led mode. + */ +#define EEPROM_LED 0x0030 +#define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001) +#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) +#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) +#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) +#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) +#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) +#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) +#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) +#define EEPROM_LED_LED_MODE FIELD16(0x1f00) + +/* + * EEPROM TXPOWER 802.11A + */ +#define EEPROM_TXPOWER_A_START 0x0031 +#define EEPROM_TXPOWER_A_SIZE 12 +#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) +#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) + +/* + * EEPROM RSSI offset 802.11BG + */ +#define EEPROM_RSSI_OFFSET_BG 0x004d +#define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff) +#define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00) + +/* + * EEPROM RSSI offset 802.11A + */ +#define EEPROM_RSSI_OFFSET_A 0x004e +#define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff) +#define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00) + +/* + * MCU mailbox commands. + */ +#define MCU_SLEEP 0x30 +#define MCU_WAKEUP 0x31 +#define MCU_LED 0x50 +#define MCU_LED_STRENGTH 0x52 + +/* + * DMA descriptor defines. + */ +#define TXD_DESC_SIZE ( 16 * sizeof(struct data_desc) ) +#define RXD_DESC_SIZE ( 16 * sizeof(struct data_desc) ) + +/* + * TX descriptor format for TX, PRIO and Beacon Ring. + */ + +/* + * Word0 + * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used. + * KEY_TABLE: Use per-client pairwise KEY table. + * KEY_INDEX: + * Key index (0~31) to the pairwise KEY table. + * 0~3 to shared KEY table 0 (BSS0). + * 4~7 to shared KEY table 1 (BSS1). + * 8~11 to shared KEY table 2 (BSS2). + * 12~15 to shared KEY table 3 (BSS3). + * BURST: Next frame belongs to same "burst" event. + */ +#define TXD_W0_OWNER_NIC FIELD32(0x00000001) +#define TXD_W0_VALID FIELD32(0x00000002) +#define TXD_W0_MORE_FRAG FIELD32(0x00000004) +#define TXD_W0_ACK FIELD32(0x00000008) +#define TXD_W0_TIMESTAMP FIELD32(0x00000010) +#define TXD_W0_OFDM FIELD32(0x00000020) +#define TXD_W0_IFS FIELD32(0x00000040) +#define TXD_W0_RETRY_MODE FIELD32(0x00000080) +#define TXD_W0_TKIP_MIC FIELD32(0x00000100) +#define TXD_W0_KEY_TABLE FIELD32(0x00000200) +#define TXD_W0_KEY_INDEX FIELD32(0x0000fc00) +#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) +#define TXD_W0_BURST FIELD32(0x10000000) +#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000) + +/* + * Word1 + * HOST_Q_ID: EDCA/HCCA queue ID. + * HW_SEQUENCE: MAC overwrites the frame sequence number. + * BUFFER_COUNT: Number of buffers in this TXD. + */ +#define TXD_W1_HOST_Q_ID FIELD32(0x0000000f) +#define TXD_W1_AIFSN FIELD32(0x000000f0) +#define TXD_W1_CWMIN FIELD32(0x00000f00) +#define TXD_W1_CWMAX FIELD32(0x0000f000) +#define TXD_W1_IV_OFFSET FIELD32(0x003f0000) +#define TXD_W1_PIGGY_BACK FIELD32(0x01000000) +#define TXD_W1_HW_SEQUENCE FIELD32(0x10000000) +#define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000) + +/* + * Word2: PLCP information + */ +#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff) +#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00) +#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000) +#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000) + +/* + * Word3 + */ +#define TXD_W3_IV FIELD32(0xffffffff) + +/* + * Word4 + */ +#define TXD_W4_EIV FIELD32(0xffffffff) + +/* + * Word5 + * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field). + * TXD_W5_PID_SUBTYPE: Driver assigned packet ID index for txdone handler. + * TXD_W5_PID_TYPE: Driver assigned packet ID type for txdone handler. + * WAITING_DMA_DONE_INT: TXD been filled with data + * and waiting for TxDoneISR housekeeping. + */ +#define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff) +#define TXD_W5_PID_SUBTYPE FIELD32(0x00001f00) +#define TXD_W5_PID_TYPE FIELD32(0x0000e000) +#define TXD_W5_TX_POWER FIELD32(0x00ff0000) +#define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000) + +/* + * the above 24-byte is called TXINFO and will be DMAed to MAC block + * through TXFIFO. MAC block use this TXINFO to control the transmission + * behavior of this frame. + * The following fields are not used by MAC block. + * They are used by DMA block and HOST driver only. + * Once a frame has been DMA to ASIC, all the following fields are useless + * to ASIC. + */ + +/* + * Word6-10: Buffer physical address + */ +#define TXD_W6_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) +#define TXD_W7_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) +#define TXD_W8_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) +#define TXD_W9_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) +#define TXD_W10_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) + +/* + * Word11-13: Buffer length + */ +#define TXD_W11_BUFFER_LENGTH0 FIELD32(0x00000fff) +#define TXD_W11_BUFFER_LENGTH1 FIELD32(0x0fff0000) +#define TXD_W12_BUFFER_LENGTH2 FIELD32(0x00000fff) +#define TXD_W12_BUFFER_LENGTH3 FIELD32(0x0fff0000) +#define TXD_W13_BUFFER_LENGTH4 FIELD32(0x00000fff) + +/* + * Word14 + */ +#define TXD_W14_SK_BUFFER FIELD32(0xffffffff) + +/* + * Word15 + */ +#define TXD_W15_NEXT_SK_BUFFER FIELD32(0xffffffff) + +/* + * RX descriptor format for RX Ring. + */ + +/* + * Word0 + * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key. + * KEY_INDEX: Decryption key actually used. + */ +#define RXD_W0_OWNER_NIC FIELD32(0x00000001) +#define RXD_W0_DROP FIELD32(0x00000002) +#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004) +#define RXD_W0_MULTICAST FIELD32(0x00000008) +#define RXD_W0_BROADCAST FIELD32(0x00000010) +#define RXD_W0_MY_BSS FIELD32(0x00000020) +#define RXD_W0_CRC_ERROR FIELD32(0x00000040) +#define RXD_W0_OFDM FIELD32(0x00000080) +#define RXD_W0_CIPHER_ERROR FIELD32(0x00000300) +#define RXD_W0_KEY_INDEX FIELD32(0x0000fc00) +#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) +#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000) + +/* + * Word1 + * SIGNAL: RX raw data rate reported by BBP. + */ +#define RXD_W1_SIGNAL FIELD32(0x000000ff) +#define RXD_W1_RSSI_AGC FIELD32(0x00001f00) +#define RXD_W1_RSSI_LNA FIELD32(0x00006000) +#define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000) + +/* + * Word2 + * IV: Received IV of originally encrypted. + */ +#define RXD_W2_IV FIELD32(0xffffffff) + +/* + * Word3 + * EIV: Received EIV of originally encrypted. + */ +#define RXD_W3_EIV FIELD32(0xffffffff) + +/* + * Word4 + */ +#define RXD_W4_RESERVED FIELD32(0xffffffff) + +/* + * the above 20-byte is called RXINFO and will be DMAed to MAC RX block + * and passed to the HOST driver. + * The following fields are for DMA block and HOST usage only. + * Can't be touched by ASIC MAC block. + */ + +/* + * Word5 + */ +#define RXD_W5_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) + +/* + * Word6-15: Reserved + */ +#define RXD_W6_RESERVED FIELD32(0xffffffff) +#define RXD_W7_RESERVED FIELD32(0xffffffff) +#define RXD_W8_RESERVED FIELD32(0xffffffff) +#define RXD_W9_RESERVED FIELD32(0xffffffff) +#define RXD_W10_RESERVED FIELD32(0xffffffff) +#define RXD_W11_RESERVED FIELD32(0xffffffff) +#define RXD_W12_RESERVED FIELD32(0xffffffff) +#define RXD_W13_RESERVED FIELD32(0xffffffff) +#define RXD_W14_RESERVED FIELD32(0xffffffff) +#define RXD_W15_RESERVED FIELD32(0xffffffff) + +/* + * Macro's for converting txpower from EEPROM to dscape value + * and from dscape value to register value. + */ +#define MIN_TXPOWER 0 +#define MAX_TXPOWER 31 +#define DEFAULT_TXPOWER 24 + +#define TXPOWER_FROM_DEV(__txpower) \ +({ \ + ((__txpower) > MAX_TXPOWER) ? \ + DEFAULT_TXPOWER : (__txpower); \ +}) + +#define TXPOWER_TO_DEV(__txpower) \ +({ \ + ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ + (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ + (__txpower)); \ +}) + +#endif /* RT61PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c new file mode 100644 index 000000000000..b047c7c0f9ee --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -0,0 +1,2124 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt73usb + Abstract: rt73usb device specific routines. + Supported chipsets: rt2571W & rt2671. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt73usb" + +#include +#include +#include +#include +#include +#include + +#include "rt2x00.h" +#include "rt2x00usb.h" +#include "rt73usb.h" + +/* + * Register access. + * All access to the CSR registers will go through the methods + * rt73usb_register_read and rt73usb_register_write. + * BBP and RF register require indirect register access, + * and use the CSR registers BBPCSR and RFCSR to achieve this. + * These indirect registers work with busy bits, + * and we will try maximal REGISTER_BUSY_COUNT times to access + * the register while taking a REGISTER_BUSY_DELAY us delay + * between each attampt. When the busy bit is still set at that time, + * the access attempt is considered to have failed, + * and we will print an error. + */ +static inline void rt73usb_register_read(const struct rt2x00_dev *rt2x00dev, + const unsigned int offset, u32 *value) +{ + __le32 reg; + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, + USB_VENDOR_REQUEST_IN, offset, + ®, sizeof(u32), REGISTER_TIMEOUT); + *value = le32_to_cpu(reg); +} + +static inline void rt73usb_register_multiread(const struct rt2x00_dev + *rt2x00dev, + const unsigned int offset, + void *value, const u32 length) +{ + int timeout = REGISTER_TIMEOUT * (length / sizeof(u32)); + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, + USB_VENDOR_REQUEST_IN, offset, + value, length, timeout); +} + +static inline void rt73usb_register_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int offset, u32 value) +{ + __le32 reg = cpu_to_le32(value); + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, offset, + ®, sizeof(u32), REGISTER_TIMEOUT); +} + +static inline void rt73usb_register_multiwrite(const struct rt2x00_dev + *rt2x00dev, + const unsigned int offset, + void *value, const u32 length) +{ + int timeout = REGISTER_TIMEOUT * (length / sizeof(u32)); + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, offset, + value, length, timeout); +} + +static u32 rt73usb_bbp_check(const struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + unsigned int i; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt73usb_register_read(rt2x00dev, PHY_CSR3, ®); + if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY)) + break; + udelay(REGISTER_BUSY_DELAY); + } + + return reg; +} + +static void rt73usb_bbp_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u32 reg; + + /* + * Wait until the BBP becomes ready. + */ + reg = rt73usb_bbp_check(rt2x00dev); + if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { + ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n"); + return; + } + + /* + * Write the data into the BBP. + */ + reg = 0; + rt2x00_set_field32(®, PHY_CSR3_VALUE, value); + rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); + rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); + rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); + + rt73usb_register_write(rt2x00dev, PHY_CSR3, reg); +} + +static void rt73usb_bbp_read(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u8 *value) +{ + u32 reg; + + /* + * Wait until the BBP becomes ready. + */ + reg = rt73usb_bbp_check(rt2x00dev); + if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { + ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); + return; + } + + /* + * Write the request into the BBP. + */ + reg = 0; + rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); + rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); + rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); + + rt73usb_register_write(rt2x00dev, PHY_CSR3, reg); + + /* + * Wait until the BBP becomes ready. + */ + reg = rt73usb_bbp_check(rt2x00dev); + if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { + ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); + *value = 0xff; + return; + } + + *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); +} + +static void rt73usb_rf_write(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) +{ + u32 reg; + unsigned int i; + + if (!word) + return; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt73usb_register_read(rt2x00dev, PHY_CSR4, ®); + if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY)) + goto rf_write; + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n"); + return; + +rf_write: + reg = 0; + rt2x00_set_field32(®, PHY_CSR4_VALUE, value); + + if (rt2x00_rf(&rt2x00dev->chip, RF5225) || + rt2x00_rf(&rt2x00dev->chip, RF2527)) + rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, 21); + else + rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, 20); + + rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); + rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); + + rt73usb_register_write(rt2x00dev, PHY_CSR4, reg); + rt2x00_rf_write(rt2x00dev, word, value); +} + +#ifdef CONFIG_RT2X00_LIB_DEBUGFS +#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) + +static void rt73usb_read_csr(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u32 *data) +{ + rt73usb_register_read(rt2x00dev, CSR_OFFSET(word), data); +} + +static void rt73usb_write_csr(const struct rt2x00_dev *rt2x00dev, + const unsigned int word, u32 data) +{ + rt73usb_register_write(rt2x00dev, CSR_OFFSET(word), data); +} + +static const struct rt2x00debug rt73usb_rt2x00debug = { + .owner = THIS_MODULE, + .csr = { + .read = rt73usb_read_csr, + .write = rt73usb_write_csr, + .word_size = sizeof(u32), + .word_count = CSR_REG_SIZE / sizeof(u32), + }, + .eeprom = { + .read = rt2x00_eeprom_read, + .write = rt2x00_eeprom_write, + .word_size = sizeof(u16), + .word_count = EEPROM_SIZE / sizeof(u16), + }, + .bbp = { + .read = rt73usb_bbp_read, + .write = rt73usb_bbp_write, + .word_size = sizeof(u8), + .word_count = BBP_SIZE / sizeof(u8), + }, + .rf = { + .read = rt2x00_rf_read, + .write = rt73usb_rf_write, + .word_size = sizeof(u32), + .word_count = RF_SIZE / sizeof(u32), + }, +}; +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + +/* + * Configuration handlers. + */ +static void rt73usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr) +{ + __le32 reg[2]; + u32 tmp; + + memset(®, 0, sizeof(reg)); + memcpy(®, addr, ETH_ALEN); + + tmp = le32_to_cpu(reg[1]); + rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); + reg[1] = cpu_to_le32(tmp); + + /* + * The MAC address is passed to us as an array of bytes, + * that array is little endian, so no need for byte ordering. + */ + rt73usb_register_multiwrite(rt2x00dev, MAC_CSR2, ®, sizeof(reg)); +} + +static void rt73usb_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid) +{ + __le32 reg[2]; + u32 tmp; + + memset(®, 0, sizeof(reg)); + memcpy(®, bssid, ETH_ALEN); + + tmp = le32_to_cpu(reg[1]); + rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3); + reg[1] = cpu_to_le32(tmp); + + /* + * The BSSID is passed to us as an array of bytes, + * that array is little endian, so no need for byte ordering. + */ + rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4, ®, sizeof(reg)); +} + +static void rt73usb_config_packet_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter) +{ + int promisc = !!(filter & IFF_PROMISC); + int multicast = !!(filter & IFF_MULTICAST); + int broadcast = !!(filter & IFF_BROADCAST); + u32 reg; + + rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, !promisc); + rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, !multicast); + rt2x00_set_field32(®, TXRX_CSR0_DROP_BORADCAST, !broadcast); + rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); +} + +static void rt73usb_config_type(struct rt2x00_dev *rt2x00dev, const int type) +{ + u32 reg; + + /* + * Clear current synchronisation setup. + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0); + rt73usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); + rt73usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); + rt73usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); + rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + + /* + * Apply hardware packet filter. + */ + rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + + if (!is_monitor_present(&rt2x00dev->interface) && + (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA)) + rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, 1); + else + rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, 0); + + /* + * If there is a non-monitor interface present + * the packet should be strict (even if a monitor interface is present!). + * When there is only 1 interface present which is in monitor mode + * we should start accepting _all_ frames. + */ + if (is_interface_present(&rt2x00dev->interface)) { + rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1); + } else if (is_monitor_present(&rt2x00dev->interface)) { + rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, 0); + rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, 0); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, 0); + rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 0); + rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 0); + } + + rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + + /* + * Enable synchronisation. + */ + rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + if (is_interface_present(&rt2x00dev->interface)) { + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); + } + + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); + if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP) + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 2); + else if (type == IEEE80211_IF_TYPE_STA) + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 1); + else if (is_monitor_present(&rt2x00dev->interface) && + !is_interface_present(&rt2x00dev->interface)) + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0); + + rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); +} + +static void rt73usb_config_rate(struct rt2x00_dev *rt2x00dev, const int rate) +{ + struct ieee80211_conf *conf = &rt2x00dev->hw->conf; + u32 reg; + u32 value; + u32 preamble; + + if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE)) + preamble = SHORT_PREAMBLE; + else + preamble = PREAMBLE; + + reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK; + + rt73usb_register_write(rt2x00dev, TXRX_CSR5, reg); + + rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ? + SHORT_DIFS : DIFS) + + PLCP + preamble + get_duration(ACK_SIZE, 10); + rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, value); + rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + + rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); + if (preamble == SHORT_PREAMBLE) + rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, 1); + else + rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, 0); + rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); +} + +static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev, + const int phymode) +{ + struct ieee80211_hw_mode *mode; + struct ieee80211_rate *rate; + + if (phymode == MODE_IEEE80211A) + rt2x00dev->curr_hwmode = HWMODE_A; + else if (phymode == MODE_IEEE80211B) + rt2x00dev->curr_hwmode = HWMODE_B; + else + rt2x00dev->curr_hwmode = HWMODE_G; + + mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode]; + rate = &mode->rates[mode->num_rates - 1]; + + rt73usb_config_rate(rt2x00dev, rate->val2); +} + +static void rt73usb_config_lock_channel(struct rt2x00_dev *rt2x00dev, + struct rf_channel *rf, + const int txpower) +{ + u8 r3; + u8 r94; + u8 smart; + + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); + + smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) || + rt2x00_rf(&rt2x00dev->chip, RF2527)); + + rt73usb_bbp_read(rt2x00dev, 3, &r3); + rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart); + rt73usb_bbp_write(rt2x00dev, 3, r3); + + r94 = 6; + if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94)) + r94 += txpower - MAX_TXPOWER; + else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94)) + r94 += txpower; + rt73usb_bbp_write(rt2x00dev, 94, r94); + + rt73usb_rf_write(rt2x00dev, 1, rf->rf1); + rt73usb_rf_write(rt2x00dev, 2, rf->rf2); + rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt73usb_rf_write(rt2x00dev, 4, rf->rf4); + + rt73usb_rf_write(rt2x00dev, 1, rf->rf1); + rt73usb_rf_write(rt2x00dev, 2, rf->rf2); + rt73usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); + rt73usb_rf_write(rt2x00dev, 4, rf->rf4); + + rt73usb_rf_write(rt2x00dev, 1, rf->rf1); + rt73usb_rf_write(rt2x00dev, 2, rf->rf2); + rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt73usb_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(10); +} + +static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev, + const int index, const int channel, + const int txpower) +{ + struct rf_channel rf; + + /* + * Fill rf_reg structure. + */ + memcpy(&rf, &rt2x00dev->spec.channels[index], sizeof(rf)); + + rt73usb_config_lock_channel(rt2x00dev, &rf, txpower); +} + +static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev, + const int txpower) +{ + struct rf_channel rf; + + rt2x00_rf_read(rt2x00dev, 1, &rf.rf1); + rt2x00_rf_read(rt2x00dev, 2, &rf.rf2); + rt2x00_rf_read(rt2x00dev, 3, &rf.rf3); + rt2x00_rf_read(rt2x00dev, 4, &rf.rf4); + + rt73usb_config_lock_channel(rt2x00dev, &rf, txpower); +} + +static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, + const int antenna_tx, + const int antenna_rx) +{ + u8 r3; + u8 r4; + u8 r77; + + rt73usb_bbp_read(rt2x00dev, 3, &r3); + rt73usb_bbp_read(rt2x00dev, 4, &r4); + rt73usb_bbp_read(rt2x00dev, 77, &r77); + + rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0); + + switch (antenna_rx) { + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); + rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, + !!(rt2x00dev->curr_hwmode != HWMODE_A)); + break; + case ANTENNA_A: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); + rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); + + if (rt2x00dev->curr_hwmode == HWMODE_A) + rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); + else + rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); + break; + case ANTENNA_B: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); + rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); + + if (rt2x00dev->curr_hwmode == HWMODE_A) + rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); + else + rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); + break; + } + + rt73usb_bbp_write(rt2x00dev, 77, r77); + rt73usb_bbp_write(rt2x00dev, 3, r3); + rt73usb_bbp_write(rt2x00dev, 4, r4); +} + +static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev, + const int antenna_tx, + const int antenna_rx) +{ + u8 r3; + u8 r4; + u8 r77; + + rt73usb_bbp_read(rt2x00dev, 3, &r3); + rt73usb_bbp_read(rt2x00dev, 4, &r4); + rt73usb_bbp_read(rt2x00dev, 77, &r77); + + rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0); + rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, + !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)); + + switch (antenna_rx) { + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); + break; + case ANTENNA_A: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); + rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); + break; + case ANTENNA_B: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); + rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); + break; + } + + rt73usb_bbp_write(rt2x00dev, 77, r77); + rt73usb_bbp_write(rt2x00dev, 3, r3); + rt73usb_bbp_write(rt2x00dev, 4, r4); +} + +struct antenna_sel { + u8 word; + /* + * value[0] -> non-LNA + * value[1] -> LNA + */ + u8 value[2]; +}; + +static const struct antenna_sel antenna_sel_a[] = { + { 96, { 0x58, 0x78 } }, + { 104, { 0x38, 0x48 } }, + { 75, { 0xfe, 0x80 } }, + { 86, { 0xfe, 0x80 } }, + { 88, { 0xfe, 0x80 } }, + { 35, { 0x60, 0x60 } }, + { 97, { 0x58, 0x58 } }, + { 98, { 0x58, 0x58 } }, +}; + +static const struct antenna_sel antenna_sel_bg[] = { + { 96, { 0x48, 0x68 } }, + { 104, { 0x2c, 0x3c } }, + { 75, { 0xfe, 0x80 } }, + { 86, { 0xfe, 0x80 } }, + { 88, { 0xfe, 0x80 } }, + { 35, { 0x50, 0x50 } }, + { 97, { 0x48, 0x48 } }, + { 98, { 0x48, 0x48 } }, +}; + +static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev, + const int antenna_tx, const int antenna_rx) +{ + const struct antenna_sel *sel; + unsigned int lna; + unsigned int i; + u32 reg; + + rt73usb_register_read(rt2x00dev, PHY_CSR0, ®); + + if (rt2x00dev->curr_hwmode == HWMODE_A) { + sel = antenna_sel_a; + lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); + + rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 0); + rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 1); + } else { + sel = antenna_sel_bg; + lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); + + rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 1); + rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 0); + } + + for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++) + rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]); + + rt73usb_register_write(rt2x00dev, PHY_CSR0, reg); + + if (rt2x00_rf(&rt2x00dev->chip, RF5226) || + rt2x00_rf(&rt2x00dev->chip, RF5225)) + rt73usb_config_antenna_5x(rt2x00dev, antenna_tx, antenna_rx); + else if (rt2x00_rf(&rt2x00dev->chip, RF2528) || + rt2x00_rf(&rt2x00dev->chip, RF2527)) + rt73usb_config_antenna_2x(rt2x00dev, antenna_tx, antenna_rx); +} + +static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev, + const int short_slot_time, + const int beacon_int) +{ + u32 reg; + + rt73usb_register_read(rt2x00dev, MAC_CSR9, ®); + rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, + short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME); + rt73usb_register_write(rt2x00dev, MAC_CSR9, reg); + + rt73usb_register_read(rt2x00dev, MAC_CSR8, ®); + rt2x00_set_field32(®, MAC_CSR8_SIFS, SIFS); + rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); + rt2x00_set_field32(®, MAC_CSR8_EIFS, EIFS); + rt73usb_register_write(rt2x00dev, MAC_CSR8, reg); + + rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER); + rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + + rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); + rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); + rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); + + rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, beacon_int * 16); + rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); +} + +static void rt73usb_config(struct rt2x00_dev *rt2x00dev, + const unsigned int flags, + struct ieee80211_conf *conf) +{ + int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME; + + if (flags & CONFIG_UPDATE_PHYMODE) + rt73usb_config_phymode(rt2x00dev, conf->phymode); + if (flags & CONFIG_UPDATE_CHANNEL) + rt73usb_config_channel(rt2x00dev, conf->channel_val, + conf->channel, conf->power_level); + if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) + rt73usb_config_txpower(rt2x00dev, conf->power_level); + if (flags & CONFIG_UPDATE_ANTENNA) + rt73usb_config_antenna(rt2x00dev, conf->antenna_sel_tx, + conf->antenna_sel_rx); + if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) + rt73usb_config_duration(rt2x00dev, short_slot_time, + conf->beacon_int); +} + +/* + * LED functions. + */ +static void rt73usb_enable_led(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt73usb_register_read(rt2x00dev, MAC_CSR14, ®); + rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70); + rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30); + rt73usb_register_write(rt2x00dev, MAC_CSR14, reg); + + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1); + if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) + rt2x00_set_field16(&rt2x00dev->led_reg, + MCU_LEDCS_LINK_A_STATUS, 1); + else + rt2x00_set_field16(&rt2x00dev->led_reg, + MCU_LEDCS_LINK_BG_STATUS, 1); + + rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000, + rt2x00dev->led_reg, REGISTER_TIMEOUT); +} + +static void rt73usb_disable_led(struct rt2x00_dev *rt2x00dev) +{ + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 0); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS, 0); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS, 0); + + rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000, + rt2x00dev->led_reg, REGISTER_TIMEOUT); +} + +static void rt73usb_activity_led(struct rt2x00_dev *rt2x00dev, int rssi) +{ + u32 led; + + if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH) + return; + + /* + * Led handling requires a positive value for the rssi, + * to do that correctly we need to add the correction. + */ + rssi += rt2x00dev->rssi_offset; + + if (rssi <= 30) + led = 0; + else if (rssi <= 39) + led = 1; + else if (rssi <= 49) + led = 2; + else if (rssi <= 53) + led = 3; + else if (rssi <= 63) + led = 4; + else + led = 5; + + rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, led, + rt2x00dev->led_reg, REGISTER_TIMEOUT); +} + +/* + * Link tuning + */ +static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + /* + * Update FCS error count from register. + */ + rt73usb_register_read(rt2x00dev, STA_CSR0, ®); + rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR); + + /* + * Update False CCA count from register. + */ + rt73usb_register_read(rt2x00dev, STA_CSR1, ®); + reg = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); + rt2x00dev->link.false_cca = + rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); +} + +static void rt73usb_reset_tuner(struct rt2x00_dev *rt2x00dev) +{ + rt73usb_bbp_write(rt2x00dev, 17, 0x20); + rt2x00dev->link.vgc_level = 0x20; +} + +static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); + u8 r17; + u8 up_bound; + u8 low_bound; + + /* + * Update Led strength + */ + rt73usb_activity_led(rt2x00dev, rssi); + + rt73usb_bbp_read(rt2x00dev, 17, &r17); + + /* + * Determine r17 bounds. + */ + if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { + low_bound = 0x28; + up_bound = 0x48; + + if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { + low_bound += 0x10; + up_bound += 0x10; + } + } else { + if (rssi > -82) { + low_bound = 0x1c; + up_bound = 0x40; + } else if (rssi > -84) { + low_bound = 0x1c; + up_bound = 0x20; + } else { + low_bound = 0x1c; + up_bound = 0x1c; + } + + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { + low_bound += 0x14; + up_bound += 0x10; + } + } + + /* + * Special big-R17 for very short distance + */ + if (rssi > -35) { + if (r17 != 0x60) + rt73usb_bbp_write(rt2x00dev, 17, 0x60); + return; + } + + /* + * Special big-R17 for short distance + */ + if (rssi >= -58) { + if (r17 != up_bound) + rt73usb_bbp_write(rt2x00dev, 17, up_bound); + return; + } + + /* + * Special big-R17 for middle-short distance + */ + if (rssi >= -66) { + low_bound += 0x10; + if (r17 != low_bound) + rt73usb_bbp_write(rt2x00dev, 17, low_bound); + return; + } + + /* + * Special mid-R17 for middle distance + */ + if (rssi >= -74) { + if (r17 != (low_bound + 0x10)) + rt73usb_bbp_write(rt2x00dev, 17, low_bound + 0x08); + return; + } + + /* + * Special case: Change up_bound based on the rssi. + * Lower up_bound when rssi is weaker then -74 dBm. + */ + up_bound -= 2 * (-74 - rssi); + if (low_bound > up_bound) + up_bound = low_bound; + + if (r17 > up_bound) { + rt73usb_bbp_write(rt2x00dev, 17, up_bound); + return; + } + + /* + * r17 does not yet exceed upper limit, continue and base + * the r17 tuning on the false CCA count. + */ + if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) { + r17 += 4; + if (r17 > up_bound) + r17 = up_bound; + rt73usb_bbp_write(rt2x00dev, 17, r17); + } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) { + r17 -= 4; + if (r17 < low_bound) + r17 = low_bound; + rt73usb_bbp_write(rt2x00dev, 17, r17); + } +} + +/* + * Firmware name function. + */ +static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) +{ + return FIRMWARE_RT2571; +} + +/* + * Initialization functions. + */ +static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, + const size_t len) +{ + unsigned int i; + int status; + u32 reg; + char *ptr = data; + char *cache; + int buflen; + int timeout; + + /* + * Wait for stable hardware. + */ + for (i = 0; i < 100; i++) { + rt73usb_register_read(rt2x00dev, MAC_CSR0, ®); + if (reg) + break; + msleep(1); + } + + if (!reg) { + ERROR(rt2x00dev, "Unstable hardware.\n"); + return -EBUSY; + } + + /* + * Write firmware to device. + * We setup a seperate cache for this action, + * since we are going to write larger chunks of data + * then normally used cache size. + */ + cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL); + if (!cache) { + ERROR(rt2x00dev, "Failed to allocate firmware cache.\n"); + return -ENOMEM; + } + + for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) { + buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE); + timeout = REGISTER_TIMEOUT * (buflen / sizeof(u32)); + + memcpy(cache, ptr, buflen); + + rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, + FIRMWARE_IMAGE_BASE + i, 0x0000, + cache, buflen, timeout); + + ptr += buflen; + } + + kfree(cache); + + /* + * Send firmware request to device to load firmware, + * we need to specify a long timeout time. + */ + status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, + 0x0000, USB_MODE_FIRMWARE, + REGISTER_TIMEOUT_FIRMWARE); + if (status < 0) { + ERROR(rt2x00dev, "Failed to write Firmware to device.\n"); + return status; + } + + rt73usb_disable_led(rt2x00dev); + + return 0; +} + +static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field32(®, TXRX_CSR0_AUTO_TX_SEQ, 1); + rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0); + rt2x00_set_field32(®, TXRX_CSR0_TX_WITHOUT_WAITING, 0); + rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + + rt73usb_register_read(rt2x00dev, TXRX_CSR1, ®); + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */ + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1, 30); /* Rssi */ + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */ + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3, 30); /* Rssi */ + rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3_VALID, 1); + rt73usb_register_write(rt2x00dev, TXRX_CSR1, reg); + + /* + * CCK TXD BBP registers + */ + rt73usb_register_read(rt2x00dev, TXRX_CSR2, ®); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0, 13); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1, 12); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2, 11); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3, 10); + rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3_VALID, 1); + rt73usb_register_write(rt2x00dev, TXRX_CSR2, reg); + + /* + * OFDM TXD BBP registers + */ + rt73usb_register_read(rt2x00dev, TXRX_CSR3, ®); + rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0, 7); + rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1, 6); + rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1_VALID, 1); + rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2, 5); + rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2_VALID, 1); + rt73usb_register_write(rt2x00dev, TXRX_CSR3, reg); + + rt73usb_register_read(rt2x00dev, TXRX_CSR7, ®); + rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_6MBS, 59); + rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_9MBS, 53); + rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_12MBS, 49); + rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_18MBS, 46); + rt73usb_register_write(rt2x00dev, TXRX_CSR7, reg); + + rt73usb_register_read(rt2x00dev, TXRX_CSR8, ®); + rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_24MBS, 44); + rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_36MBS, 42); + rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_48MBS, 42); + rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42); + rt73usb_register_write(rt2x00dev, TXRX_CSR8, reg); + + rt73usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); + + rt73usb_register_read(rt2x00dev, MAC_CSR6, ®); + rt2x00_set_field32(®, MAC_CSR6_MAX_FRAME_UNIT, 0xfff); + rt73usb_register_write(rt2x00dev, MAC_CSR6, reg); + + rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718); + + if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) + return -EBUSY; + + rt73usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00); + + /* + * Invalidate all Shared Keys (SEC_CSR0), + * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5) + */ + rt73usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000); + rt73usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000); + rt73usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000); + + reg = 0x000023b0; + if (rt2x00_rf(&rt2x00dev->chip, RF5225) || + rt2x00_rf(&rt2x00dev->chip, RF2527)) + rt2x00_set_field32(®, PHY_CSR1_RF_RPI, 1); + rt73usb_register_write(rt2x00dev, PHY_CSR1, reg); + + rt73usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06); + rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606); + rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408); + + rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, ®); + rt2x00_set_field32(®, AC_TXOP_CSR0_AC0_TX_OP, 0); + rt2x00_set_field32(®, AC_TXOP_CSR0_AC1_TX_OP, 0); + rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg); + + rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, ®); + rt2x00_set_field32(®, AC_TXOP_CSR1_AC2_TX_OP, 192); + rt2x00_set_field32(®, AC_TXOP_CSR1_AC3_TX_OP, 48); + rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg); + + rt73usb_register_read(rt2x00dev, MAC_CSR9, ®); + rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0); + rt73usb_register_write(rt2x00dev, MAC_CSR9, reg); + + /* + * We must clear the error counters. + * These registers are cleared on read, + * so we may pass a useless variable to store the value. + */ + rt73usb_register_read(rt2x00dev, STA_CSR0, ®); + rt73usb_register_read(rt2x00dev, STA_CSR1, ®); + rt73usb_register_read(rt2x00dev, STA_CSR2, ®); + + /* + * Reset MAC and BBP registers. + */ + rt73usb_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); + rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); + rt73usb_register_write(rt2x00dev, MAC_CSR1, reg); + + rt73usb_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); + rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); + rt73usb_register_write(rt2x00dev, MAC_CSR1, reg); + + rt73usb_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); + rt73usb_register_write(rt2x00dev, MAC_CSR1, reg); + + return 0; +} + +static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt73usb_bbp_read(rt2x00dev, 0, &value); + if ((value != 0xff) && (value != 0x00)) + goto continue_csr_init; + NOTICE(rt2x00dev, "Waiting for BBP register.\n"); + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); + return -EACCES; + +continue_csr_init: + rt73usb_bbp_write(rt2x00dev, 3, 0x80); + rt73usb_bbp_write(rt2x00dev, 15, 0x30); + rt73usb_bbp_write(rt2x00dev, 21, 0xc8); + rt73usb_bbp_write(rt2x00dev, 22, 0x38); + rt73usb_bbp_write(rt2x00dev, 23, 0x06); + rt73usb_bbp_write(rt2x00dev, 24, 0xfe); + rt73usb_bbp_write(rt2x00dev, 25, 0x0a); + rt73usb_bbp_write(rt2x00dev, 26, 0x0d); + rt73usb_bbp_write(rt2x00dev, 32, 0x0b); + rt73usb_bbp_write(rt2x00dev, 34, 0x12); + rt73usb_bbp_write(rt2x00dev, 37, 0x07); + rt73usb_bbp_write(rt2x00dev, 39, 0xf8); + rt73usb_bbp_write(rt2x00dev, 41, 0x60); + rt73usb_bbp_write(rt2x00dev, 53, 0x10); + rt73usb_bbp_write(rt2x00dev, 54, 0x18); + rt73usb_bbp_write(rt2x00dev, 60, 0x10); + rt73usb_bbp_write(rt2x00dev, 61, 0x04); + rt73usb_bbp_write(rt2x00dev, 62, 0x04); + rt73usb_bbp_write(rt2x00dev, 75, 0xfe); + rt73usb_bbp_write(rt2x00dev, 86, 0xfe); + rt73usb_bbp_write(rt2x00dev, 88, 0xfe); + rt73usb_bbp_write(rt2x00dev, 90, 0x0f); + rt73usb_bbp_write(rt2x00dev, 99, 0x00); + rt73usb_bbp_write(rt2x00dev, 102, 0x16); + rt73usb_bbp_write(rt2x00dev, 107, 0x04); + + DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); + + if (eeprom != 0xffff && eeprom != 0x0000) { + reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); + value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); + DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", + reg_id, value); + rt73usb_bbp_write(rt2x00dev, reg_id, value); + } + } + DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); + + return 0; +} + +/* + * Device state switch handlers. + */ +static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + u32 reg; + + rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, + state == STATE_RADIO_RX_OFF); + rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); +} + +static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + /* + * Initialize all registers. + */ + if (rt73usb_init_registers(rt2x00dev) || + rt73usb_init_bbp(rt2x00dev)) { + ERROR(rt2x00dev, "Register initialization failed.\n"); + return -EIO; + } + + rt2x00usb_enable_radio(rt2x00dev); + + /* + * Enable LED + */ + rt73usb_enable_led(rt2x00dev); + + return 0; +} + +static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + /* + * Disable LED + */ + rt73usb_disable_led(rt2x00dev); + + rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818); + + /* + * Disable synchronisation. + */ + rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0); + + rt2x00usb_disable_radio(rt2x00dev); +} + +static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) +{ + u32 reg; + unsigned int i; + char put_to_sleep; + char current_state; + + put_to_sleep = (state != STATE_AWAKE); + + rt73usb_register_read(rt2x00dev, MAC_CSR12, ®); + rt2x00_set_field32(®, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep); + rt2x00_set_field32(®, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep); + rt73usb_register_write(rt2x00dev, MAC_CSR12, reg); + + /* + * Device is not guaranteed to be in the requested state yet. + * We must wait until the register indicates that the + * device has entered the correct state. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt73usb_register_read(rt2x00dev, MAC_CSR12, ®); + current_state = + rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); + if (current_state == !put_to_sleep) + return 0; + msleep(10); + } + + NOTICE(rt2x00dev, "Device failed to enter state %d, " + "current device state %d.\n", !put_to_sleep, current_state); + + return -EBUSY; +} + +static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int retval = 0; + + switch (state) { + case STATE_RADIO_ON: + retval = rt73usb_enable_radio(rt2x00dev); + break; + case STATE_RADIO_OFF: + rt73usb_disable_radio(rt2x00dev); + break; + case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_OFF: + rt73usb_toggle_rx(rt2x00dev, state); + break; + case STATE_DEEP_SLEEP: + case STATE_SLEEP: + case STATE_STANDBY: + case STATE_AWAKE: + retval = rt73usb_set_state(rt2x00dev, state); + break; + default: + retval = -ENOTSUPP; + break; + } + + return retval; +} + +/* + * TX descriptor initialization + */ +static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, + struct data_desc *txd, + struct data_entry_desc *desc, + struct ieee80211_hdr *ieee80211hdr, + unsigned int length, + struct ieee80211_tx_control *control) +{ + u32 word; + + /* + * Start writing the descriptor words. + */ + rt2x00_desc_read(txd, 1, &word); + rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue); + rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs); + rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min); + rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max); + rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); + rt2x00_desc_write(txd, 1, word); + + rt2x00_desc_read(txd, 2, &word); + rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal); + rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high); + rt2x00_desc_write(txd, 2, word); + + rt2x00_desc_read(txd, 5, &word); + rt2x00_set_field32(&word, TXD_W5_TX_POWER, + TXPOWER_TO_DEV(control->power_level)); + rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); + rt2x00_desc_write(txd, 5, word); + + rt2x00_desc_read(txd, 0, &word); + rt2x00_set_field32(&word, TXD_W0_BURST, + test_bit(ENTRY_TXD_BURST, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_VALID, 1); + rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, + test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_ACK, + !(control->flags & IEEE80211_TXCTL_NO_ACK)); + rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_OFDM, + test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); + rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, + !!(control->flags & + IEEE80211_TXCTL_LONG_RETRY_LIMIT)); + rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length); + rt2x00_set_field32(&word, TXD_W0_BURST2, + test_bit(ENTRY_TXD_BURST, &desc->flags)); + rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); + rt2x00_desc_write(txd, 0, word); +} + +/* + * TX data initialization + */ +static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, + unsigned int queue) +{ + u32 reg; + + if (queue != IEEE80211_TX_QUEUE_BEACON) + return; + + /* + * For Wi-Fi faily generated beacons between participating stations. + * Set TBTT phase adaptive adjustment step to 8us (default 16us) + */ + rt73usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008); + + rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) { + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); + rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + } +} + +/* + * RX control handlers + */ +static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) +{ + u16 eeprom; + u8 offset; + u8 lna; + + lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA); + switch (lna) { + case 3: + offset = 90; + break; + case 2: + offset = 74; + break; + case 1: + offset = 64; + break; + default: + return 0; + } + + if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { + if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { + if (lna == 3 || lna == 2) + offset += 10; + } else { + if (lna == 3) + offset += 6; + else if (lna == 2) + offset += 8; + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); + offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); + } else { + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) + offset += 14; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); + offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); + } + + return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; +} + +static int rt73usb_fill_rxdone(struct data_entry *entry, + int *signal, int *rssi, int *ofdm, int *size) +{ + struct data_desc *rxd = (struct data_desc *)entry->skb->data; + u32 word0; + u32 word1; + + rt2x00_desc_read(rxd, 0, &word0); + rt2x00_desc_read(rxd, 1, &word1); + + if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) || + rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR)) + return -EINVAL; + + /* + * Obtain the status about this packet. + */ + *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); + *rssi = rt73usb_agc_to_rssi(entry->ring->rt2x00dev, word1); + *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); + *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); + + /* + * Pull the skb to clear the descriptor area. + */ + skb_pull(entry->skb, entry->ring->desc_size); + + return 0; +} + +/* + * Device probe functions. + */ +static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u16 word; + u8 *mac; + s8 value; + + rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); + + /* + * Start validation of the data that has been read. + */ + mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); + if (!is_valid_ether_addr(mac)) { + random_ether_addr(mac); + EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac)); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); + rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 2); + rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 2); + rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); + rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5226); + rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); + EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); + EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_G, 0); + rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_A, 0); + rt2x00_set_field16(&word, EEPROM_LED_POLARITY_ACT, 0); + rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_0, 0); + rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_1, 0); + rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_2, 0); + rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_3, 0); + rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_4, 0); + rt2x00_set_field16(&word, EEPROM_LED_LED_MODE, + LED_MODE_DEFAULT); + rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word); + EEPROM(rt2x00dev, "Led: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); + rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); + EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); + EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); + } else { + value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1); + if (value < -10 || value > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); + value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2); + if (value < -10 || value > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); + EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); + } else { + value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1); + if (value < -10 || value > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); + value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2); + if (value < -10 || value > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); + } + + return 0; +} + +static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 value; + u16 eeprom; + + /* + * Read EEPROM word for configuration. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + + /* + * Identify RF chipset. + */ + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt73usb_register_read(rt2x00dev, MAC_CSR0, ®); + rt2x00_set_chip(rt2x00dev, RT2571, value, reg); + + if (!rt2x00_rev(&rt2x00dev->chip, 0x25730)) { + ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); + return -ENODEV; + } + + if (!rt2x00_rf(&rt2x00dev->chip, RF5226) && + !rt2x00_rf(&rt2x00dev->chip, RF2528) && + !rt2x00_rf(&rt2x00dev->chip, RF5225) && + !rt2x00_rf(&rt2x00dev->chip, RF2527)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } + + /* + * Identify default antenna configuration. + */ + rt2x00dev->hw->conf.antenna_sel_tx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); + rt2x00dev->hw->conf.antenna_sel_rx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); + + /* + * Read the Frame type. + */ + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE)) + __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags); + + /* + * Read frequency offset. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); + rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); + + /* + * Read external LNA informations. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); + + if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA)) { + __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); + __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); + } + + /* + * Store led settings, for correct led behaviour. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); + + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE, + rt2x00dev->led_mode); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_GPIO_0)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_GPIO_1)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_GPIO_2)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_GPIO_3)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_GPIO_4)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT, + rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_RDY_G)); + rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A, + rt2x00_get_field16(eeprom, + EEPROM_LED_POLARITY_RDY_A)); + + return 0; +} + +/* + * RF value list for RF2528 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_bg_2528[] = { + { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b }, + { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f }, + { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b }, + { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f }, + { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b }, + { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f }, + { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b }, + { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f }, + { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b }, + { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f }, + { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b }, + { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f }, + { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b }, + { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 }, +}; + +/* + * RF value list for RF5226 + * Supports: 2.4 GHz & 5.2 GHz + */ +static const struct rf_channel rf_vals_5226[] = { + { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b }, + { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f }, + { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b }, + { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f }, + { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b }, + { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f }, + { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b }, + { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f }, + { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b }, + { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f }, + { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b }, + { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f }, + { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b }, + { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 }, + + /* 802.11 UNI / HyperLan 2 */ + { 36, 0x00002c0c, 0x0000099a, 0x00098255, 0x000fea23 }, + { 40, 0x00002c0c, 0x000009a2, 0x00098255, 0x000fea03 }, + { 44, 0x00002c0c, 0x000009a6, 0x00098255, 0x000fea0b }, + { 48, 0x00002c0c, 0x000009aa, 0x00098255, 0x000fea13 }, + { 52, 0x00002c0c, 0x000009ae, 0x00098255, 0x000fea1b }, + { 56, 0x00002c0c, 0x000009b2, 0x00098255, 0x000fea23 }, + { 60, 0x00002c0c, 0x000009ba, 0x00098255, 0x000fea03 }, + { 64, 0x00002c0c, 0x000009be, 0x00098255, 0x000fea0b }, + + /* 802.11 HyperLan 2 */ + { 100, 0x00002c0c, 0x00000a2a, 0x000b8255, 0x000fea03 }, + { 104, 0x00002c0c, 0x00000a2e, 0x000b8255, 0x000fea0b }, + { 108, 0x00002c0c, 0x00000a32, 0x000b8255, 0x000fea13 }, + { 112, 0x00002c0c, 0x00000a36, 0x000b8255, 0x000fea1b }, + { 116, 0x00002c0c, 0x00000a3a, 0x000b8255, 0x000fea23 }, + { 120, 0x00002c0c, 0x00000a82, 0x000b8255, 0x000fea03 }, + { 124, 0x00002c0c, 0x00000a86, 0x000b8255, 0x000fea0b }, + { 128, 0x00002c0c, 0x00000a8a, 0x000b8255, 0x000fea13 }, + { 132, 0x00002c0c, 0x00000a8e, 0x000b8255, 0x000fea1b }, + { 136, 0x00002c0c, 0x00000a92, 0x000b8255, 0x000fea23 }, + + /* 802.11 UNII */ + { 140, 0x00002c0c, 0x00000a9a, 0x000b8255, 0x000fea03 }, + { 149, 0x00002c0c, 0x00000aa2, 0x000b8255, 0x000fea1f }, + { 153, 0x00002c0c, 0x00000aa6, 0x000b8255, 0x000fea27 }, + { 157, 0x00002c0c, 0x00000aae, 0x000b8255, 0x000fea07 }, + { 161, 0x00002c0c, 0x00000ab2, 0x000b8255, 0x000fea0f }, + { 165, 0x00002c0c, 0x00000ab6, 0x000b8255, 0x000fea17 }, + + /* MMAC(Japan)J52 ch 34,38,42,46 */ + { 34, 0x00002c0c, 0x0008099a, 0x000da255, 0x000d3a0b }, + { 38, 0x00002c0c, 0x0008099e, 0x000da255, 0x000d3a13 }, + { 42, 0x00002c0c, 0x000809a2, 0x000da255, 0x000d3a1b }, + { 46, 0x00002c0c, 0x000809a6, 0x000da255, 0x000d3a23 }, +}; + +/* + * RF value list for RF5225 & RF2527 + * Supports: 2.4 GHz & 5.2 GHz + */ +static const struct rf_channel rf_vals_5225_2527[] = { + { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b }, + { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f }, + { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b }, + { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f }, + { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b }, + { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f }, + { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b }, + { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f }, + { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b }, + { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f }, + { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b }, + { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f }, + { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b }, + { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 }, + + /* 802.11 UNI / HyperLan 2 */ + { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 }, + { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 }, + { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b }, + { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 }, + { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b }, + { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 }, + { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 }, + { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b }, + + /* 802.11 HyperLan 2 */ + { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 }, + { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b }, + { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 }, + { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b }, + { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 }, + { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 }, + { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b }, + { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 }, + { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b }, + { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 }, + + /* 802.11 UNII */ + { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 }, + { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f }, + { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 }, + { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 }, + { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f }, + { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 }, + + /* MMAC(Japan)J52 ch 34,38,42,46 */ + { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b }, + { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 }, + { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b }, + { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 }, +}; + + +static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +{ + struct hw_mode_spec *spec = &rt2x00dev->spec; + u8 *txpower; + unsigned int i; + + /* + * Initialize all hw fields. + */ + rt2x00dev->hw->flags = + IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_MONITOR_DURING_OPER | + IEEE80211_HW_NO_PROBE_FILTERING; + rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; + rt2x00dev->hw->max_signal = MAX_SIGNAL; + rt2x00dev->hw->max_rssi = MAX_RX_SSI; + rt2x00dev->hw->queues = 5; + + SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev); + SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, + rt2x00_eeprom_addr(rt2x00dev, + EEPROM_MAC_ADDR_0)); + + /* + * Convert tx_power array in eeprom. + */ + txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); + for (i = 0; i < 14; i++) + txpower[i] = TXPOWER_FROM_DEV(txpower[i]); + + /* + * Initialize hw_mode information. + */ + spec->num_modes = 2; + spec->num_rates = 12; + spec->tx_power_a = NULL; + spec->tx_power_bg = txpower; + spec->tx_power_default = DEFAULT_TXPOWER; + + if (rt2x00_rf(&rt2x00dev->chip, RF2528)) { + spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528); + spec->channels = rf_vals_bg_2528; + } else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) { + spec->num_channels = ARRAY_SIZE(rf_vals_5226); + spec->channels = rf_vals_5226; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) { + spec->num_channels = 14; + spec->channels = rf_vals_5225_2527; + } else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) { + spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527); + spec->channels = rf_vals_5225_2527; + } + + if (rt2x00_rf(&rt2x00dev->chip, RF5225) || + rt2x00_rf(&rt2x00dev->chip, RF5226)) { + spec->num_modes = 3; + + txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); + for (i = 0; i < 14; i++) + txpower[i] = TXPOWER_FROM_DEV(txpower[i]); + + spec->tx_power_a = txpower; + } +} + +static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + int retval; + + /* + * Allocate eeprom data. + */ + retval = rt73usb_validate_eeprom(rt2x00dev); + if (retval) + return retval; + + retval = rt73usb_init_eeprom(rt2x00dev); + if (retval) + return retval; + + /* + * Initialize hw specifications. + */ + rt73usb_probe_hw_mode(rt2x00dev); + + /* + * USB devices require scheduled packet filter toggling + * This device requires firmware + */ + __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags); + __set_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags); + + /* + * Set the rssi offset. + */ + rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + + return 0; +} + +/* + * IEEE80211 stack callback functions. + */ +static int rt73usb_set_retry_limit(struct ieee80211_hw *hw, + u32 short_retry, u32 long_retry) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u32 reg; + + rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); + rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry); + rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry); + rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); + + return 0; +} + +#if 0 +/* + * Mac80211 demands get_tsf must be atomic. + * This is not possible for rt73usb since all register access + * functions require sleeping. Untill mac80211 no longer needs + * get_tsf to be atomic, this function should be disabled. + */ +static u64 rt73usb_get_tsf(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u64 tsf; + u32 reg; + + rt73usb_register_read(rt2x00dev, TXRX_CSR13, ®); + tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32; + rt73usb_register_read(rt2x00dev, TXRX_CSR12, ®); + tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER); + + return tsf; +} +#endif + +static void rt73usb_reset_tsf(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + rt73usb_register_write(rt2x00dev, TXRX_CSR12, 0); + rt73usb_register_write(rt2x00dev, TXRX_CSR13, 0); +} + +int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *control) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + int timeout; + + /* + * Just in case the ieee80211 doesn't set this, + * but we need this queue set for the descriptor + * initialization. + */ + control->queue = IEEE80211_TX_QUEUE_BEACON; + + /* + * First we create the beacon. + */ + skb_push(skb, TXD_DESC_SIZE); + rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data, + (struct ieee80211_hdr *)(skb->data + + TXD_DESC_SIZE), + skb->len - TXD_DESC_SIZE, control); + + /* + * Write entire beacon with descriptor to register, + * and kick the beacon generator. + */ + timeout = REGISTER_TIMEOUT * (skb->len / sizeof(u32)); + rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, + HW_BEACON_BASE0, 0x0000, + skb->data, skb->len, timeout); + rt73usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + + return 0; +} + +static const struct ieee80211_ops rt73usb_mac80211_ops = { + .tx = rt2x00mac_tx, + .add_interface = rt2x00mac_add_interface, + .remove_interface = rt2x00mac_remove_interface, + .config = rt2x00mac_config, + .config_interface = rt2x00mac_config_interface, + .set_multicast_list = rt2x00mac_set_multicast_list, + .get_stats = rt2x00mac_get_stats, + .set_retry_limit = rt73usb_set_retry_limit, + .conf_tx = rt2x00mac_conf_tx, + .get_tx_stats = rt2x00mac_get_tx_stats, +#if 0 +/* + * See comment at the rt73usb_get_tsf function. + */ + .get_tsf = rt73usb_get_tsf, +#endif + .reset_tsf = rt73usb_reset_tsf, + .beacon_update = rt73usb_beacon_update, +}; + +static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { + .probe_hw = rt73usb_probe_hw, + .get_firmware_name = rt73usb_get_firmware_name, + .load_firmware = rt73usb_load_firmware, + .initialize = rt2x00usb_initialize, + .uninitialize = rt2x00usb_uninitialize, + .set_device_state = rt73usb_set_device_state, + .link_stats = rt73usb_link_stats, + .reset_tuner = rt73usb_reset_tuner, + .link_tuner = rt73usb_link_tuner, + .write_tx_desc = rt73usb_write_tx_desc, + .write_tx_data = rt2x00usb_write_tx_data, + .kick_tx_queue = rt73usb_kick_tx_queue, + .fill_rxdone = rt73usb_fill_rxdone, + .config_mac_addr = rt73usb_config_mac_addr, + .config_bssid = rt73usb_config_bssid, + .config_packet_filter = rt73usb_config_packet_filter, + .config_type = rt73usb_config_type, + .config = rt73usb_config, +}; + +static const struct rt2x00_ops rt73usb_ops = { + .name = DRV_NAME, + .rxd_size = RXD_DESC_SIZE, + .txd_size = TXD_DESC_SIZE, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .lib = &rt73usb_rt2x00_ops, + .hw = &rt73usb_mac80211_ops, +#ifdef CONFIG_RT2X00_LIB_DEBUGFS + .debugfs = &rt73usb_rt2x00debug, +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ +}; + +/* + * rt73usb module information. + */ +static struct usb_device_id rt73usb_device_table[] = { + /* AboCom */ + { USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Askey */ + { USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) }, + /* ASUS */ + { USB_DEVICE(0x0b05, 0x1723), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0b05, 0x1724), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Belkin */ + { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Billionton */ + { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Buffalo */ + { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) }, + /* CNet */ + { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Conceptronic */ + { USB_DEVICE(0x14b2, 0x3c22), USB_DEVICE_DATA(&rt73usb_ops) }, + /* D-Link */ + { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Gemtek */ + { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Gigabyte */ + { USB_DEVICE(0x1044, 0x8008), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x1044, 0x800a), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Huawei-3Com */ + { USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Hercules */ + { USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Linksys */ + { USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) }, + /* MSI */ + { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Ralink */ + { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Qcom */ + { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Senao */ + { USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Sitecom */ + { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Surecom */ + { USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Planex */ + { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) }, + { 0, } +}; + +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Ralink RT73 USB Wireless LAN driver."); +MODULE_SUPPORTED_DEVICE("Ralink RT2571W & RT2671 USB chipset based cards"); +MODULE_DEVICE_TABLE(usb, rt73usb_device_table); +MODULE_FIRMWARE(FIRMWARE_RT2571); +MODULE_LICENSE("GPL"); + +static struct usb_driver rt73usb_driver = { + .name = DRV_NAME, + .id_table = rt73usb_device_table, + .probe = rt2x00usb_probe, + .disconnect = rt2x00usb_disconnect, + .suspend = rt2x00usb_suspend, + .resume = rt2x00usb_resume, +}; + +static int __init rt73usb_init(void) +{ + return usb_register(&rt73usb_driver); +} + +static void __exit rt73usb_exit(void) +{ + usb_deregister(&rt73usb_driver); +} + +module_init(rt73usb_init); +module_exit(rt73usb_exit); diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h new file mode 100644 index 000000000000..5d63a1a714f3 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -0,0 +1,1024 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt73usb + Abstract: Data structures and registers for the rt73usb module. + Supported chipsets: rt2571W & rt2671. + */ + +#ifndef RT73USB_H +#define RT73USB_H + +/* + * RF chip defines. + */ +#define RF5226 0x0001 +#define RF2528 0x0002 +#define RF5225 0x0003 +#define RF2527 0x0004 + +/* + * Signal information. + * Defaul offset is required for RSSI <-> dBm conversion. + */ +#define MAX_SIGNAL 100 +#define MAX_RX_SSI -1 +#define DEFAULT_RSSI_OFFSET 120 + +/* + * Register layout information. + */ +#define CSR_REG_BASE 0x3000 +#define CSR_REG_SIZE 0x04b0 +#define EEPROM_BASE 0x0000 +#define EEPROM_SIZE 0x0100 +#define BBP_SIZE 0x0080 +#define RF_SIZE 0x0014 + +/* + * USB registers. + */ + +/* + * MCU_LEDCS: LED control for MCU Mailbox. + */ +#define MCU_LEDCS_LED_MODE FIELD16(0x001f) +#define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020) +#define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040) +#define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080) +#define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100) +#define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200) +#define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400) +#define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800) +#define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000) +#define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000) +#define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000) +#define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000) + +/* + * 8051 firmware image. + */ +#define FIRMWARE_RT2571 "rt73.bin" +#define FIRMWARE_IMAGE_BASE 0x0800 + +/* + * Security key table memory. + * 16 entries 32-byte for shared key table + * 64 entries 32-byte for pairwise key table + * 64 entries 8-byte for pairwise ta key table + */ +#define SHARED_KEY_TABLE_BASE 0x1000 +#define PAIRWISE_KEY_TABLE_BASE 0x1200 +#define PAIRWISE_TA_TABLE_BASE 0x1a00 + +struct hw_key_entry { + u8 key[16]; + u8 tx_mic[8]; + u8 rx_mic[8]; +} __attribute__ ((packed)); + +struct hw_pairwise_ta_entry { + u8 address[6]; + u8 reserved[2]; +} __attribute__ ((packed)); + +/* + * Since NULL frame won't be that long (256 byte), + * We steal 16 tail bytes to save debugging settings. + */ +#define HW_DEBUG_SETTING_BASE 0x2bf0 + +/* + * On-chip BEACON frame space. + */ +#define HW_BEACON_BASE0 0x2400 +#define HW_BEACON_BASE1 0x2500 +#define HW_BEACON_BASE2 0x2600 +#define HW_BEACON_BASE3 0x2700 + +/* + * MAC Control/Status Registers(CSR). + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * MAC_CSR0: ASIC revision number. + */ +#define MAC_CSR0 0x3000 + +/* + * MAC_CSR1: System control register. + * SOFT_RESET: Software reset bit, 1: reset, 0: normal. + * BBP_RESET: Hardware reset BBP. + * HOST_READY: Host is ready after initialization, 1: ready. + */ +#define MAC_CSR1 0x3004 +#define MAC_CSR1_SOFT_RESET FIELD32(0x00000001) +#define MAC_CSR1_BBP_RESET FIELD32(0x00000002) +#define MAC_CSR1_HOST_READY FIELD32(0x00000004) + +/* + * MAC_CSR2: STA MAC register 0. + */ +#define MAC_CSR2 0x3008 +#define MAC_CSR2_BYTE0 FIELD32(0x000000ff) +#define MAC_CSR2_BYTE1 FIELD32(0x0000ff00) +#define MAC_CSR2_BYTE2 FIELD32(0x00ff0000) +#define MAC_CSR2_BYTE3 FIELD32(0xff000000) + +/* + * MAC_CSR3: STA MAC register 1. + */ +#define MAC_CSR3 0x300c +#define MAC_CSR3_BYTE4 FIELD32(0x000000ff) +#define MAC_CSR3_BYTE5 FIELD32(0x0000ff00) +#define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) + +/* + * MAC_CSR4: BSSID register 0. + */ +#define MAC_CSR4 0x3010 +#define MAC_CSR4_BYTE0 FIELD32(0x000000ff) +#define MAC_CSR4_BYTE1 FIELD32(0x0000ff00) +#define MAC_CSR4_BYTE2 FIELD32(0x00ff0000) +#define MAC_CSR4_BYTE3 FIELD32(0xff000000) + +/* + * MAC_CSR5: BSSID register 1. + * BSS_ID_MASK: 3: one BSSID, 0: 4 BSSID, 2 or 1: 2 BSSID. + */ +#define MAC_CSR5 0x3014 +#define MAC_CSR5_BYTE4 FIELD32(0x000000ff) +#define MAC_CSR5_BYTE5 FIELD32(0x0000ff00) +#define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000) + +/* + * MAC_CSR6: Maximum frame length register. + */ +#define MAC_CSR6 0x3018 +#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff) + +/* + * MAC_CSR7: Reserved + */ +#define MAC_CSR7 0x301c + +/* + * MAC_CSR8: SIFS/EIFS register. + * All units are in US. + */ +#define MAC_CSR8 0x3020 +#define MAC_CSR8_SIFS FIELD32(0x000000ff) +#define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00) +#define MAC_CSR8_EIFS FIELD32(0xffff0000) + +/* + * MAC_CSR9: Back-Off control register. + * SLOT_TIME: Slot time, default is 20us for 802.11BG. + * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1). + * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1). + * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD. + */ +#define MAC_CSR9 0x3024 +#define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff) +#define MAC_CSR9_CWMIN FIELD32(0x00000f00) +#define MAC_CSR9_CWMAX FIELD32(0x0000f000) +#define MAC_CSR9_CW_SELECT FIELD32(0x00010000) + +/* + * MAC_CSR10: Power state configuration. + */ +#define MAC_CSR10 0x3028 + +/* + * MAC_CSR11: Power saving transition time register. + * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU. + * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. + * WAKEUP_LATENCY: In unit of TU. + */ +#define MAC_CSR11 0x302c +#define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff) +#define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00) +#define MAC_CSR11_AUTOWAKE FIELD32(0x00008000) +#define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000) + +/* + * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1). + * CURRENT_STATE: 0:sleep, 1:awake. + * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP. + * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake. + */ +#define MAC_CSR12 0x3030 +#define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001) +#define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002) +#define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004) +#define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008) + +/* + * MAC_CSR13: GPIO. + */ +#define MAC_CSR13 0x3034 + +/* + * MAC_CSR14: LED control register. + * ON_PERIOD: On period, default 70ms. + * OFF_PERIOD: Off period, default 30ms. + * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON. + * SW_LED: s/w LED, 1: ON, 0: OFF. + * HW_LED_POLARITY: 0: active low, 1: active high. + */ +#define MAC_CSR14 0x3038 +#define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff) +#define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00) +#define MAC_CSR14_HW_LED FIELD32(0x00010000) +#define MAC_CSR14_SW_LED FIELD32(0x00020000) +#define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000) +#define MAC_CSR14_SW_LED2 FIELD32(0x00080000) + +/* + * MAC_CSR15: NAV control. + */ +#define MAC_CSR15 0x303c + +/* + * TXRX control registers. + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * TXRX_CSR0: TX/RX configuration register. + * TSF_OFFSET: Default is 24. + * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame. + * DISABLE_RX: Disable Rx engine. + * DROP_CRC: Drop CRC error. + * DROP_PHYSICAL: Drop physical error. + * DROP_CONTROL: Drop control frame. + * DROP_NOT_TO_ME: Drop not to me unicast frame. + * DROP_TO_DS: Drop fram ToDs bit is true. + * DROP_VERSION_ERROR: Drop version error frame. + * DROP_MULTICAST: Drop multicast frames. + * DROP_BORADCAST: Drop broadcast frames. + * ROP_ACK_CTS: Drop received ACK and CTS. + */ +#define TXRX_CSR0 0x3040 +#define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff) +#define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00) +#define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000) +#define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000) +#define TXRX_CSR0_DROP_CRC FIELD32(0x00020000) +#define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000) +#define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000) +#define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000) +#define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000) +#define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000) +#define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000) +#define TXRX_CSR0_DROP_BORADCAST FIELD32(0x01000000) +#define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000) +#define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000) + +/* + * TXRX_CSR1 + */ +#define TXRX_CSR1 0x3044 +#define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f) +#define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080) +#define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00) +#define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000) +#define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000) +#define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000) +#define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000) +#define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000) + +/* + * TXRX_CSR2 + */ +#define TXRX_CSR2 0x3048 +#define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f) +#define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080) +#define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00) +#define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000) +#define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000) +#define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000) +#define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000) +#define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000) + +/* + * TXRX_CSR3 + */ +#define TXRX_CSR3 0x304c +#define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f) +#define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080) +#define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00) +#define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000) +#define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000) +#define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000) +#define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000) +#define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000) + +/* + * TXRX_CSR4: Auto-Responder/Tx-retry register. + * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble. + * OFDM_TX_RATE_DOWN: 1:enable. + * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step. + * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M. + */ +#define TXRX_CSR4 0x3050 +#define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff) +#define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700) +#define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000) +#define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000) +#define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000) +#define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000) +#define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000) +#define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000) +#define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000) +#define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000) + +/* + * TXRX_CSR5 + */ +#define TXRX_CSR5 0x3054 + +/* + * TXRX_CSR6: ACK/CTS payload consumed time + */ +#define TXRX_CSR6 0x3058 + +/* + * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps. + */ +#define TXRX_CSR7 0x305c +#define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff) +#define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00) +#define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000) +#define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000) + +/* + * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps. + */ +#define TXRX_CSR8 0x3060 +#define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff) +#define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00) +#define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000) +#define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000) + +/* + * TXRX_CSR9: Synchronization control register. + * BEACON_INTERVAL: In unit of 1/16 TU. + * TSF_TICKING: Enable TSF auto counting. + * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. + * BEACON_GEN: Enable beacon generator. + */ +#define TXRX_CSR9 0x3064 +#define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff) +#define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000) +#define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000) +#define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000) +#define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000) +#define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000) + +/* + * TXRX_CSR10: BEACON alignment. + */ +#define TXRX_CSR10 0x3068 + +/* + * TXRX_CSR11: AES mask. + */ +#define TXRX_CSR11 0x306c + +/* + * TXRX_CSR12: TSF low 32. + */ +#define TXRX_CSR12 0x3070 +#define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff) + +/* + * TXRX_CSR13: TSF high 32. + */ +#define TXRX_CSR13 0x3074 +#define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff) + +/* + * TXRX_CSR14: TBTT timer. + */ +#define TXRX_CSR14 0x3078 + +/* + * TXRX_CSR15: TKIP MIC priority byte "AND" mask. + */ +#define TXRX_CSR15 0x307c + +/* + * PHY control registers. + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * PHY_CSR0: RF/PS control. + */ +#define PHY_CSR0 0x3080 +#define PHY_CSR0_PA_PE_BG FIELD32(0x00010000) +#define PHY_CSR0_PA_PE_A FIELD32(0x00020000) + +/* + * PHY_CSR1 + */ +#define PHY_CSR1 0x3084 +#define PHY_CSR1_RF_RPI FIELD32(0x00010000) + +/* + * PHY_CSR2: Pre-TX BBP control. + */ +#define PHY_CSR2 0x3088 + +/* + * PHY_CSR3: BBP serial control register. + * VALUE: Register value to program into BBP. + * REG_NUM: Selected BBP register. + * READ_CONTROL: 0: Write BBP, 1: Read BBP. + * BUSY: 1: ASIC is busy execute BBP programming. + */ +#define PHY_CSR3 0x308c +#define PHY_CSR3_VALUE FIELD32(0x000000ff) +#define PHY_CSR3_REGNUM FIELD32(0x00007f00) +#define PHY_CSR3_READ_CONTROL FIELD32(0x00008000) +#define PHY_CSR3_BUSY FIELD32(0x00010000) + +/* + * PHY_CSR4: RF serial control register + * VALUE: Register value (include register id) serial out to RF/IF chip. + * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22). + * IF_SELECT: 1: select IF to program, 0: select RF to program. + * PLL_LD: RF PLL_LD status. + * BUSY: 1: ASIC is busy execute RF programming. + */ +#define PHY_CSR4 0x3090 +#define PHY_CSR4_VALUE FIELD32(0x00ffffff) +#define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000) +#define PHY_CSR4_IF_SELECT FIELD32(0x20000000) +#define PHY_CSR4_PLL_LD FIELD32(0x40000000) +#define PHY_CSR4_BUSY FIELD32(0x80000000) + +/* + * PHY_CSR5: RX to TX signal switch timing control. + */ +#define PHY_CSR5 0x3094 +#define PHY_CSR5_IQ_FLIP FIELD32(0x00000004) + +/* + * PHY_CSR6: TX to RX signal timing control. + */ +#define PHY_CSR6 0x3098 +#define PHY_CSR6_IQ_FLIP FIELD32(0x00000004) + +/* + * PHY_CSR7: TX DAC switching timing control. + */ +#define PHY_CSR7 0x309c + +/* + * Security control register. + */ + +/* + * SEC_CSR0: Shared key table control. + */ +#define SEC_CSR0 0x30a0 +#define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001) +#define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002) +#define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004) +#define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008) +#define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010) +#define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020) +#define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040) +#define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080) +#define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100) +#define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200) +#define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400) +#define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800) +#define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000) +#define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000) +#define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000) +#define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000) + +/* + * SEC_CSR1: Shared key table security mode register. + */ +#define SEC_CSR1 0x30a4 +#define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007) +#define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070) +#define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700) +#define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000) +#define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000) +#define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000) +#define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000) +#define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000) + +/* + * Pairwise key table valid bitmap registers. + * SEC_CSR2: pairwise key table valid bitmap 0. + * SEC_CSR3: pairwise key table valid bitmap 1. + */ +#define SEC_CSR2 0x30a8 +#define SEC_CSR3 0x30ac + +/* + * SEC_CSR4: Pairwise key table lookup control. + */ +#define SEC_CSR4 0x30b0 + +/* + * SEC_CSR5: shared key table security mode register. + */ +#define SEC_CSR5 0x30b4 +#define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007) +#define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070) +#define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700) +#define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000) +#define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000) +#define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000) +#define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000) +#define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000) + +/* + * STA control registers. + */ + +/* + * STA_CSR0: RX PLCP error count & RX FCS error count. + */ +#define STA_CSR0 0x30c0 +#define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff) +#define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000) + +/* + * STA_CSR1: RX False CCA count & RX LONG frame count. + */ +#define STA_CSR1 0x30c4 +#define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff) +#define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000) + +/* + * STA_CSR2: TX Beacon count and RX FIFO overflow count. + */ +#define STA_CSR2 0x30c8 +#define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff) +#define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000) + +/* + * STA_CSR3: TX Beacon count. + */ +#define STA_CSR3 0x30cc +#define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff) + +/* + * STA_CSR4: TX Retry count. + */ +#define STA_CSR4 0x30d0 +#define STA_CSR4_TX_NO_RETRY_COUNT FIELD32(0x0000ffff) +#define STA_CSR4_TX_ONE_RETRY_COUNT FIELD32(0xffff0000) + +/* + * STA_CSR5: TX Retry count. + */ +#define STA_CSR5 0x30d4 +#define STA_CSR4_TX_MULTI_RETRY_COUNT FIELD32(0x0000ffff) +#define STA_CSR4_TX_RETRY_FAIL_COUNT FIELD32(0xffff0000) + +/* + * QOS control registers. + */ + +/* + * QOS_CSR1: TXOP holder MAC address register. + */ +#define QOS_CSR1 0x30e4 +#define QOS_CSR1_BYTE4 FIELD32(0x000000ff) +#define QOS_CSR1_BYTE5 FIELD32(0x0000ff00) + +/* + * QOS_CSR2: TXOP holder timeout register. + */ +#define QOS_CSR2 0x30e8 + +/* + * RX QOS-CFPOLL MAC address register. + * QOS_CSR3: RX QOS-CFPOLL MAC address 0. + * QOS_CSR4: RX QOS-CFPOLL MAC address 1. + */ +#define QOS_CSR3 0x30ec +#define QOS_CSR4 0x30f0 + +/* + * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL. + */ +#define QOS_CSR5 0x30f4 + +/* + * WMM Scheduler Register + */ + +/* + * AIFSN_CSR: AIFSN for each EDCA AC. + * AIFSN0: For AC_BK. + * AIFSN1: For AC_BE. + * AIFSN2: For AC_VI. + * AIFSN3: For AC_VO. + */ +#define AIFSN_CSR 0x0400 +#define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f) +#define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0) +#define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00) +#define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000) + +/* + * CWMIN_CSR: CWmin for each EDCA AC. + * CWMIN0: For AC_BK. + * CWMIN1: For AC_BE. + * CWMIN2: For AC_VI. + * CWMIN3: For AC_VO. + */ +#define CWMIN_CSR 0x0404 +#define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f) +#define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0) +#define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00) +#define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000) + +/* + * CWMAX_CSR: CWmax for each EDCA AC. + * CWMAX0: For AC_BK. + * CWMAX1: For AC_BE. + * CWMAX2: For AC_VI. + * CWMAX3: For AC_VO. + */ +#define CWMAX_CSR 0x0408 +#define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f) +#define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0) +#define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00) +#define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000) + +/* + * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register. + * AC0_TX_OP: For AC_BK, in unit of 32us. + * AC1_TX_OP: For AC_BE, in unit of 32us. + */ +#define AC_TXOP_CSR0 0x040c +#define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff) +#define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000) + +/* + * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register. + * AC2_TX_OP: For AC_VI, in unit of 32us. + * AC3_TX_OP: For AC_VO, in unit of 32us. + */ +#define AC_TXOP_CSR1 0x0410 +#define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff) +#define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000) + +/* + * BBP registers. + * The wordsize of the BBP is 8 bits. + */ + +/* + * R2 + */ +#define BBP_R2_BG_MODE FIELD8(0x20) + +/* + * R3 + */ +#define BBP_R3_SMART_MODE FIELD8(0x01) + +/* + * R4: RX antenna control + * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529) + */ +#define BBP_R4_RX_ANTENNA FIELD8(0x03) +#define BBP_R4_RX_FRAME_END FIELD8(0x20) + +/* + * R77 + */ +#define BBP_R77_PAIR FIELD8(0x03) + +/* + * RF registers + */ + +/* + * RF 3 + */ +#define RF3_TXPOWER FIELD32(0x00003e00) + +/* + * RF 4 + */ +#define RF4_FREQ_OFFSET FIELD32(0x0003f000) + +/* + * EEPROM content. + * The wordsize of the EEPROM is 16 bits. + */ + +/* + * HW MAC address. + */ +#define EEPROM_MAC_ADDR_0 0x0002 +#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) +#define EEPROM_MAC_ADDR1 0x0003 +#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) +#define EEPROM_MAC_ADDR_2 0x0004 +#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) + +/* + * EEPROM antenna. + * ANTENNA_NUM: Number of antenna's. + * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. + * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. + * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only. + * DYN_TXAGC: Dynamic TX AGC control. + * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. + * RF_TYPE: Rf_type of this adapter. + */ +#define EEPROM_ANTENNA 0x0010 +#define EEPROM_ANTENNA_NUM FIELD16(0x0003) +#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) +#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) +#define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040) +#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) +#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) +#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) + +/* + * EEPROM NIC config. + * EXTERNAL_LNA: External LNA. + */ +#define EEPROM_NIC 0x0011 +#define EEPROM_NIC_EXTERNAL_LNA FIELD16(0x0010) + +/* + * EEPROM geography. + * GEO_A: Default geographical setting for 5GHz band + * GEO: Default geographical setting. + */ +#define EEPROM_GEOGRAPHY 0x0012 +#define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff) +#define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00) + +/* + * EEPROM BBP. + */ +#define EEPROM_BBP_START 0x0013 +#define EEPROM_BBP_SIZE 16 +#define EEPROM_BBP_VALUE FIELD16(0x00ff) +#define EEPROM_BBP_REG_ID FIELD16(0xff00) + +/* + * EEPROM TXPOWER 802.11G + */ +#define EEPROM_TXPOWER_G_START 0x0023 +#define EEPROM_TXPOWER_G_SIZE 7 +#define EEPROM_TXPOWER_G_1 FIELD16(0x00ff) +#define EEPROM_TXPOWER_G_2 FIELD16(0xff00) + +/* + * EEPROM Frequency + */ +#define EEPROM_FREQ 0x002f +#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) +#define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00) +#define EEPROM_FREQ_SEQ FIELD16(0x0300) + +/* + * EEPROM LED. + * POLARITY_RDY_G: Polarity RDY_G setting. + * POLARITY_RDY_A: Polarity RDY_A setting. + * POLARITY_ACT: Polarity ACT setting. + * POLARITY_GPIO_0: Polarity GPIO0 setting. + * POLARITY_GPIO_1: Polarity GPIO1 setting. + * POLARITY_GPIO_2: Polarity GPIO2 setting. + * POLARITY_GPIO_3: Polarity GPIO3 setting. + * POLARITY_GPIO_4: Polarity GPIO4 setting. + * LED_MODE: Led mode. + */ +#define EEPROM_LED 0x0030 +#define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001) +#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) +#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) +#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) +#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) +#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) +#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) +#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) +#define EEPROM_LED_LED_MODE FIELD16(0x1f00) + +/* + * EEPROM TXPOWER 802.11A + */ +#define EEPROM_TXPOWER_A_START 0x0031 +#define EEPROM_TXPOWER_A_SIZE 12 +#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) +#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) + +/* + * EEPROM RSSI offset 802.11BG + */ +#define EEPROM_RSSI_OFFSET_BG 0x004d +#define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff) +#define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00) + +/* + * EEPROM RSSI offset 802.11A + */ +#define EEPROM_RSSI_OFFSET_A 0x004e +#define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff) +#define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00) + +/* + * DMA descriptor defines. + */ +#define TXD_DESC_SIZE ( 6 * sizeof(struct data_desc) ) +#define RXD_DESC_SIZE ( 6 * sizeof(struct data_desc) ) + +/* + * TX descriptor format for TX, PRIO and Beacon Ring. + */ + +/* + * Word0 + * BURST: Next frame belongs to same "burst" event. + * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used. + * KEY_TABLE: Use per-client pairwise KEY table. + * KEY_INDEX: + * Key index (0~31) to the pairwise KEY table. + * 0~3 to shared KEY table 0 (BSS0). + * 4~7 to shared KEY table 1 (BSS1). + * 8~11 to shared KEY table 2 (BSS2). + * 12~15 to shared KEY table 3 (BSS3). + * BURST2: For backward compatibility, set to same value as BURST. + */ +#define TXD_W0_BURST FIELD32(0x00000001) +#define TXD_W0_VALID FIELD32(0x00000002) +#define TXD_W0_MORE_FRAG FIELD32(0x00000004) +#define TXD_W0_ACK FIELD32(0x00000008) +#define TXD_W0_TIMESTAMP FIELD32(0x00000010) +#define TXD_W0_OFDM FIELD32(0x00000020) +#define TXD_W0_IFS FIELD32(0x00000040) +#define TXD_W0_RETRY_MODE FIELD32(0x00000080) +#define TXD_W0_TKIP_MIC FIELD32(0x00000100) +#define TXD_W0_KEY_TABLE FIELD32(0x00000200) +#define TXD_W0_KEY_INDEX FIELD32(0x0000fc00) +#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) +#define TXD_W0_BURST2 FIELD32(0x10000000) +#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000) + +/* + * Word1 + * HOST_Q_ID: EDCA/HCCA queue ID. + * HW_SEQUENCE: MAC overwrites the frame sequence number. + * BUFFER_COUNT: Number of buffers in this TXD. + */ +#define TXD_W1_HOST_Q_ID FIELD32(0x0000000f) +#define TXD_W1_AIFSN FIELD32(0x000000f0) +#define TXD_W1_CWMIN FIELD32(0x00000f00) +#define TXD_W1_CWMAX FIELD32(0x0000f000) +#define TXD_W1_IV_OFFSET FIELD32(0x003f0000) +#define TXD_W1_HW_SEQUENCE FIELD32(0x10000000) +#define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000) + +/* + * Word2: PLCP information + */ +#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff) +#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00) +#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000) +#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000) + +/* + * Word3 + */ +#define TXD_W3_IV FIELD32(0xffffffff) + +/* + * Word4 + */ +#define TXD_W4_EIV FIELD32(0xffffffff) + +/* + * Word5 + * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field). + * PACKET_ID: Driver assigned packet ID to categorize TXResult in interrupt. + * WAITING_DMA_DONE_INT: TXD been filled with data + * and waiting for TxDoneISR housekeeping. + */ +#define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff) +#define TXD_W5_PACKET_ID FIELD32(0x0000ff00) +#define TXD_W5_TX_POWER FIELD32(0x00ff0000) +#define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000) + +/* + * RX descriptor format for RX Ring. + */ + +/* + * Word0 + * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key. + * KEY_INDEX: Decryption key actually used. + */ +#define RXD_W0_OWNER_NIC FIELD32(0x00000001) +#define RXD_W0_DROP FIELD32(0x00000002) +#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004) +#define RXD_W0_MULTICAST FIELD32(0x00000008) +#define RXD_W0_BROADCAST FIELD32(0x00000010) +#define RXD_W0_MY_BSS FIELD32(0x00000020) +#define RXD_W0_CRC_ERROR FIELD32(0x00000040) +#define RXD_W0_OFDM FIELD32(0x00000080) +#define RXD_W0_CIPHER_ERROR FIELD32(0x00000300) +#define RXD_W0_KEY_INDEX FIELD32(0x0000fc00) +#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) +#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000) + +/* + * WORD1 + * SIGNAL: RX raw data rate reported by BBP. + * RSSI: RSSI reported by BBP. + */ +#define RXD_W1_SIGNAL FIELD32(0x000000ff) +#define RXD_W1_RSSI_AGC FIELD32(0x00001f00) +#define RXD_W1_RSSI_LNA FIELD32(0x00006000) +#define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000) + +/* + * Word2 + * IV: Received IV of originally encrypted. + */ +#define RXD_W2_IV FIELD32(0xffffffff) + +/* + * Word3 + * EIV: Received EIV of originally encrypted. + */ +#define RXD_W3_EIV FIELD32(0xffffffff) + +/* + * Word4 + */ +#define RXD_W4_RESERVED FIELD32(0xffffffff) + +/* + * the above 20-byte is called RXINFO and will be DMAed to MAC RX block + * and passed to the HOST driver. + * The following fields are for DMA block and HOST usage only. + * Can't be touched by ASIC MAC block. + */ + +/* + * Word5 + */ +#define RXD_W5_RESERVED FIELD32(0xffffffff) + +/* + * Macro's for converting txpower from EEPROM to dscape value + * and from dscape value to register value. + */ +#define MIN_TXPOWER 0 +#define MAX_TXPOWER 31 +#define DEFAULT_TXPOWER 24 + +#define TXPOWER_FROM_DEV(__txpower) \ +({ \ + ((__txpower) > MAX_TXPOWER) ? \ + DEFAULT_TXPOWER : (__txpower); \ +}) + +#define TXPOWER_TO_DEV(__txpower) \ +({ \ + ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ + (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ + (__txpower)); \ +}) + +#endif /* RT73USB_H */ -- cgit v1.2.3