From 5ec97ba0713d118a1cd03ccc7677a13769253bbd Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Fri, 29 Apr 2016 14:42:33 +0300 Subject: iio: bmi160: Fix output data rate for accel Format is INT_PLUS_MICRO and micro odr part of ODR should be parts of a micro. Also s/8000/800 this is obviously a typo. Fixes: 77c4ad2d6a9 ("iio: imu: Add initial support for Bosch BMI160") Signed-off-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- drivers/iio/imu/bmi160/bmi160_core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c index 0bf92b06d7d8..cd9b75eeccd7 100644 --- a/drivers/iio/imu/bmi160/bmi160_core.c +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -209,11 +209,11 @@ static const struct bmi160_scale_item bmi160_scale_table[] = { }; static const struct bmi160_odr bmi160_accel_odr[] = { - {0x01, 0, 78125}, - {0x02, 1, 5625}, - {0x03, 3, 125}, - {0x04, 6, 25}, - {0x05, 12, 5}, + {0x01, 0, 781250}, + {0x02, 1, 562500}, + {0x03, 3, 125000}, + {0x04, 6, 250000}, + {0x05, 12, 500000}, {0x06, 25, 0}, {0x07, 50, 0}, {0x08, 100, 0}, @@ -229,7 +229,7 @@ static const struct bmi160_odr bmi160_gyro_odr[] = { {0x08, 100, 0}, {0x09, 200, 0}, {0x0A, 400, 0}, - {0x0B, 8000, 0}, + {0x0B, 800, 0}, {0x0C, 1600, 0}, {0x0D, 3200, 0}, }; -- cgit v1.2.3 From c25d3f37be016b301f446a5257645c4845daf53c Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Fri, 29 Apr 2016 14:42:34 +0300 Subject: iio: bmi160: Fix ODR setting mask and val parameters of regmap_update_bits were reveresed. Fixes: 77c4ad2d6a9 ("iio: imu: Add initial support for Bosch BMI160") Signed-off-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- drivers/iio/imu/bmi160/bmi160_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c index cd9b75eeccd7..b8a290ec984e 100644 --- a/drivers/iio/imu/bmi160/bmi160_core.c +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -364,8 +364,8 @@ int bmi160_set_odr(struct bmi160_data *data, enum bmi160_sensor_type t, return regmap_update_bits(data->regmap, bmi160_regs[t].config, - bmi160_odr_table[t].tbl[i].bits, - bmi160_regs[t].config_odr_mask); + bmi160_regs[t].config_odr_mask, + bmi160_odr_table[t].tbl[i].bits); } static int bmi160_get_odr(struct bmi160_data *data, enum bmi160_sensor_type t, -- cgit v1.2.3 From 04bf02175fe9577875fb8285cc2d08169fef613a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 29 Apr 2016 12:03:31 +0300 Subject: iio: dac: ad5592r: Off by one bug in ad5592r_alloc_channels() The > here should be >= or we go beyond the end for the array. Signed-off-by: Dan Carpenter Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5592r-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c index 948f600e7059..69bde5909854 100644 --- a/drivers/iio/dac/ad5592r-base.c +++ b/drivers/iio/dac/ad5592r-base.c @@ -525,7 +525,7 @@ static int ad5592r_alloc_channels(struct ad5592r_state *st) device_for_each_child_node(st->dev, child) { ret = fwnode_property_read_u32(child, "reg", ®); - if (ret || reg > ARRAY_SIZE(st->channel_modes)) + if (ret || reg >= ARRAY_SIZE(st->channel_modes)) continue; ret = fwnode_property_read_u32(child, "adi,mode", &tmp); -- cgit v1.2.3 From 53dfc3b9e6c54d077f578f9016b6c8ab5f891e10 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 28 Apr 2016 14:02:41 +0200 Subject: iio: light: bh1780: return after write When writing a value using direct reg access from debugfs we need to return and not fall through to reading the value, lest we'll dereference a NULL pointer. Cc: Dan Carpenter Reported-by: Dan Carpenter Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/light/bh1780.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/light/bh1780.c b/drivers/iio/light/bh1780.c index 72b364e4aa72..f83595334ff1 100644 --- a/drivers/iio/light/bh1780.c +++ b/drivers/iio/light/bh1780.c @@ -84,7 +84,7 @@ static int bh1780_debugfs_reg_access(struct iio_dev *indio_dev, int ret; if (!readval) - bh1780_write(bh1780, (u8)reg, (u8)writeval); + return bh1780_write(bh1780, (u8)reg, (u8)writeval); ret = bh1780_read(bh1780, (u8)reg); if (ret < 0) -- cgit v1.2.3 From a3e5afe491bf7462013aa9f0bb3b55e3d05b784d Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Thu, 28 Apr 2016 23:39:53 +0900 Subject: iio: pressure: bmp280: fix error message for wrong chip id The bmp280 driver also supports BMP180 which has a different chip id with BMP280. The probe routine verifies that the device reports the correct chip id but the error message is confusing as if BMP280's chip id is always expected. Reported-by: Matt Ranostay Signed-off-by: Akinobu Mita Cc: Matt Ranostay Cc: Vlad Dogaru Cc: Christoph Mair Cc: Jonathan Cameron Cc: Hartmut Knaack Cc: Lars-Peter Clausen Cc: Peter Meerwald Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c index 2f1498e12bb2..724452d61846 100644 --- a/drivers/iio/pressure/bmp280.c +++ b/drivers/iio/pressure/bmp280.c @@ -879,8 +879,8 @@ static int bmp280_probe(struct i2c_client *client, if (ret < 0) return ret; if (chip_id != id->driver_data) { - dev_err(&client->dev, "bad chip id. expected %x got %x\n", - BMP280_CHIP_ID, chip_id); + dev_err(&client->dev, "bad chip id. expected %lx got %x\n", + id->driver_data, chip_id); return -EINVAL; } -- cgit v1.2.3 From 0e35cf5ce00d873d6e529d2b2cd7598d52438051 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Fri, 20 May 2016 10:06:41 -0700 Subject: iio: humidity: hdc100x: correct humidity integration time mask Apply the correct mask to enable all available humidity integration times. Currently, the driver defaults to 6500 and all is okay with that. However, if 3850 is selected we get a stuck bit and can't change back to 6500 or select 2500. (Verified with HDC1008) Signed-off-by: Alison Schofield Cc: Daniel Baluta Reviewed-by: Matt Ranostay Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/hdc100x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c index fa4767613173..59aa1cbdc2fd 100644 --- a/drivers/iio/humidity/hdc100x.c +++ b/drivers/iio/humidity/hdc100x.c @@ -55,7 +55,7 @@ static const struct { }, { /* IIO_HUMIDITYRELATIVE channel */ .shift = 8, - .mask = 2, + .mask = 3, }, }; -- cgit v1.2.3 From 1cb0d06a00f2ec0ed8f926ec62f53bc9e12ea55e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 17 May 2016 11:02:56 +0300 Subject: iio: humidity: am2315: Remove a stray unlock We haven't taken the lock yet so we don't need to unlock here. Fixes: 0d96d5ead3f7 ('iio: humidity: Add triggered buffer support for AM2315') Signed-off-by: Dan Carpenter Acked-by: Tiberiu Breana Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/am2315.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c index 3be6d209a159..11535911a5c6 100644 --- a/drivers/iio/humidity/am2315.c +++ b/drivers/iio/humidity/am2315.c @@ -165,10 +165,8 @@ static irqreturn_t am2315_trigger_handler(int irq, void *p) struct am2315_sensor_data sensor_data; ret = am2315_read_data(data, &sensor_data); - if (ret < 0) { - mutex_unlock(&data->lock); + if (ret < 0) goto err; - } mutex_lock(&data->lock); if (*(indio_dev->active_scan_mask) == AM2315_ALL_CHANNEL_MASK) { -- cgit v1.2.3 From 14f2461b822dffb116256ee9155f7eca96064f7a Mon Sep 17 00:00:00 2001 From: Crestez Dan Leonard Date: Fri, 20 May 2016 17:44:36 +0300 Subject: max44000: Remove scale from proximity This is not implemented and doesn't really make sense because IIO proximity is unit-less. Remove IIO_CHAN_INFO_SCALE from info_mask because so that the _scale sysfs entry won't appear. This fixes userspace tools like generic_buffer which abort when reads returns an error. Signed-off-by: Crestez Dan Leonard Signed-off-by: Jonathan Cameron --- drivers/iio/light/max44000.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/light/max44000.c b/drivers/iio/light/max44000.c index e01e58a9bd14..f17cb2ea18f5 100644 --- a/drivers/iio/light/max44000.c +++ b/drivers/iio/light/max44000.c @@ -147,7 +147,6 @@ static const struct iio_chan_spec max44000_channels[] = { { .type = IIO_PROXIMITY, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), .scan_index = MAX44000_SCAN_INDEX_PRX, .scan_type = { .sign = 'u', -- cgit v1.2.3 From 5138806f16c74c7cb8ac3e408a859c79eb7c9567 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Sat, 21 May 2016 20:01:01 -0700 Subject: iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output IIO_CHAN_INFO_RAW was returning processed data which was incorrect. This also adds the IIO_CHAN_INFO_SCALE value to convert to a processed value. Signed-off-by: Matt Ranostay Cc: Signed-off-by: Jonathan Cameron --- Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 | 2 +- drivers/iio/proximity/as3935.c | 10 ++++++++-- 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 index 6708c5e264aa..33e96f740639 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 +++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 @@ -1,4 +1,4 @@ -What /sys/bus/iio/devices/iio:deviceX/in_proximity_raw +What /sys/bus/iio/devices/iio:deviceX/in_proximity_input Date: March 2014 KernelVersion: 3.15 Contact: Matt Ranostay diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index f4d29d5dbd5f..f0a0defb68a4 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -72,7 +72,8 @@ static const struct iio_chan_spec as3935_channels[] = { .type = IIO_PROXIMITY, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_PROCESSED), + BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_SCALE), .scan_index = 0, .scan_type = { .sign = 'u', @@ -181,7 +182,12 @@ static int as3935_read_raw(struct iio_dev *indio_dev, /* storm out of range */ if (*val == AS3935_DATA_MASK) return -EINVAL; - *val *= 1000; + + if (m == IIO_CHAN_INFO_PROCESSED) + *val *= 1000; + break; + case IIO_CHAN_INFO_SCALE: + *val = 1000; break; default: return -EINVAL; -- cgit v1.2.3 From 7d0643634ea567969bf3f3ed6193a9d6fc75653b Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Sat, 21 May 2016 20:01:02 -0700 Subject: iio: proximity: as3935: remove triggered buffer processing Triggered buffers shouldn't return processed data, and the respective conversion was overflowing the defined .realbits for the channel. Cc: george.mccollister@gmail.com Signed-off-by: Matt Ranostay Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/as3935.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index f0a0defb68a4..6aed02437efc 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -213,7 +213,6 @@ static irqreturn_t as3935_trigger_handler(int irq, void *private) if (ret) goto err_read; val &= AS3935_DATA_MASK; - val *= 1000; iio_push_to_buffers_with_timestamp(indio_dev, &val, pf->timestamp); err_read: -- cgit v1.2.3 From 37b1ba2c68cfbe37f5f45bb91bcfaf2b016ae6a1 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Sat, 21 May 2016 20:01:03 -0700 Subject: iio: proximity: as3935: fix buffer stack trashing Buffer wasn't of a valid size to allow the timestamp, and correct padding. This patchset also moves the buffer off the stack, and onto the heap. Cc: george.mccollister@gmail.com Signed-off-by: Matt Ranostay Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/as3935.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index 6aed02437efc..e2f926cdcad2 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -64,6 +64,7 @@ struct as3935_state { struct delayed_work work; u32 tune_cap; + u8 buffer[16]; /* 8-bit data + 56-bit padding + 64-bit timestamp */ u8 buf[2] ____cacheline_aligned; }; @@ -212,9 +213,10 @@ static irqreturn_t as3935_trigger_handler(int irq, void *private) ret = as3935_read(st, AS3935_DATA, &val); if (ret) goto err_read; - val &= AS3935_DATA_MASK; - iio_push_to_buffers_with_timestamp(indio_dev, &val, pf->timestamp); + st->buffer[0] = val & AS3935_DATA_MASK; + iio_push_to_buffers_with_timestamp(indio_dev, &st->buffer, + pf->timestamp); err_read: iio_trigger_notify_done(indio_dev->trig); -- cgit v1.2.3 From 94abd778a7bb00ed5d00f56d9fbfcbf5b7c02a5c Mon Sep 17 00:00:00 2001 From: Jaap Jan Meijer Date: Thu, 12 May 2016 18:25:08 +0200 Subject: brcmfmac: add fallback for devices that do not report per-chain values If brcmf_cfg80211_get_station fails to determine the RSSI from the per-chain values get the value individually as a fallback. Fixes: 1f0dc59a6de9 ("brcmfmac: rework .get_station() callback") Signed-off-by: Jaap Jan Meijer Acked-by: Arend van Spriel Signed-off-by: Kalle Valo --- .../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index d0631b6cfd53..62f475e31077 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -2540,12 +2540,14 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, const u8 *mac, struct station_info *sinfo) { struct brcmf_if *ifp = netdev_priv(ndev); + struct brcmf_scb_val_le scb_val; s32 err = 0; struct brcmf_sta_info_le sta_info_le; u32 sta_flags; u32 is_tdls_peer; s32 total_rssi; s32 count_rssi; + int rssi; u32 i; brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac); @@ -2629,6 +2631,20 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); total_rssi /= count_rssi; sinfo->signal = total_rssi; + } else if (test_bit(BRCMF_VIF_STATUS_CONNECTED, + &ifp->vif->sme_state)) { + memset(&scb_val, 0, sizeof(scb_val)); + err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI, + &scb_val, sizeof(scb_val)); + if (err) { + brcmf_err("Could not get rssi (%d)\n", err); + goto done; + } else { + rssi = le32_to_cpu(scb_val.val); + sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); + sinfo->signal = rssi; + brcmf_dbg(CONN, "RSSI %d dBm\n", rssi); + } } } done: -- cgit v1.2.3 From de26859dcf363d520cc44e59f6dcaf20ebe0aadf Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 21 May 2016 11:50:35 -0500 Subject: rtlwifi: Fix scheduling while atomic error from commit 49f86ec21c01 Commit 49f86ec21c01 ("rtlwifi: Change long delays to sleeps") was correct for most cases; however, driver rtl8192ce calls the affected routines while in atomic context. The kernel bug output is as follows: BUG: scheduling while atomic: wpa_supplicant/627/0x00000002 [...] [] __schedule+0x899/0xad0 [] schedule+0x3c/0x90 [] schedule_hrtimeout_range_clock+0xa2/0x120 [] ? hrtimer_init+0x120/0x120 [] ? schedule_hrtimeout_range_clock+0x96/0x120 [] schedule_hrtimeout_range+0x13/0x20 [] usleep_range+0x4f/0x70 [] rtl_rfreg_delay+0x38/0x50 [rtlwifi] [] rtl92c_phy_config_rf_with_headerfile+0xc7/0xe0 [rtl8192ce] To fix this bug, three of the changes from delay to sleep are reverted. Unfortunately, one of the changes involves a delay of 50 msec. The calling code will be modified so that this long delay can be avoided; however, this change is being pushed now to fix the problem in kernel 4.6.0. Fixes: 49f86ec21c01 ("rtlwifi: Change long delays to sleeps") Reported-by: James Feeney Signed-off-by: Larry Finger Cc: James Feeney Cc: Stable [4.6+] Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c b/drivers/net/wireless/realtek/rtlwifi/core.c index 0f48048b8654..3a0faa8fe9d4 100644 --- a/drivers/net/wireless/realtek/rtlwifi/core.c +++ b/drivers/net/wireless/realtek/rtlwifi/core.c @@ -54,7 +54,7 @@ EXPORT_SYMBOL(channel5g_80m); void rtl_addr_delay(u32 addr) { if (addr == 0xfe) - msleep(50); + mdelay(50); else if (addr == 0xfd) msleep(5); else if (addr == 0xfc) @@ -75,7 +75,7 @@ void rtl_rfreg_delay(struct ieee80211_hw *hw, enum radio_path rfpath, u32 addr, rtl_addr_delay(addr); } else { rtl_set_rfreg(hw, rfpath, addr, mask, data); - usleep_range(1, 2); + udelay(1); } } EXPORT_SYMBOL(rtl_rfreg_delay); @@ -86,7 +86,7 @@ void rtl_bb_delay(struct ieee80211_hw *hw, u32 addr, u32 data) rtl_addr_delay(addr); } else { rtl_set_bbreg(hw, addr, MASKDWORD, data); - usleep_range(1, 2); + udelay(1); } } EXPORT_SYMBOL(rtl_bb_delay); -- cgit v1.2.3 From d43a41152f8e9e4c0d19850884d1fada076dee10 Mon Sep 17 00:00:00 2001 From: Gregor Boirie Date: Tue, 19 Apr 2016 11:18:33 +0200 Subject: iio:st_pressure: fix sampling gains (bring inline with ABI) Temperature channels report scaled samples in Celsius although expected as milli degree Celsius in Documentation/ABI/testing/sysfs-bus-iio. Gains are not implemented at all for LPS001WP pressure and temperature channels. This patch ensures that proper offsets and scales are exposed to userpace for both pressure and temperature channels. Also fix a NULL pointer exception when userspace reads content of sysfs scale attribute when gains are not defined. Signed-off-by: Gregor Boirie Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/st_pressure_core.c | 80 ++++++++++++++++++++------------- 1 file changed, 50 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 9e9b72a8f18f..257b58ac6779 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -28,15 +28,21 @@ #include #include "st_pressure.h" +#define MCELSIUS_PER_CELSIUS 1000 + +/* Default pressure sensitivity */ #define ST_PRESS_LSB_PER_MBAR 4096UL #define ST_PRESS_KPASCAL_NANO_SCALE (100000000UL / \ ST_PRESS_LSB_PER_MBAR) + +/* Default temperature sensitivity */ #define ST_PRESS_LSB_PER_CELSIUS 480UL -#define ST_PRESS_CELSIUS_NANO_SCALE (1000000000UL / \ - ST_PRESS_LSB_PER_CELSIUS) +#define ST_PRESS_MILLI_CELSIUS_OFFSET 42500UL + #define ST_PRESS_NUMBER_DATA_CHANNELS 1 /* FULLSCALE */ +#define ST_PRESS_FS_AVL_1100MB 1100 #define ST_PRESS_FS_AVL_1260MB 1260 #define ST_PRESS_1_OUT_XL_ADDR 0x28 @@ -54,9 +60,6 @@ #define ST_PRESS_LPS331AP_PW_MASK 0x80 #define ST_PRESS_LPS331AP_FS_ADDR 0x23 #define ST_PRESS_LPS331AP_FS_MASK 0x30 -#define ST_PRESS_LPS331AP_FS_AVL_1260_VAL 0x00 -#define ST_PRESS_LPS331AP_FS_AVL_1260_GAIN ST_PRESS_KPASCAL_NANO_SCALE -#define ST_PRESS_LPS331AP_FS_AVL_TEMP_GAIN ST_PRESS_CELSIUS_NANO_SCALE #define ST_PRESS_LPS331AP_BDU_ADDR 0x20 #define ST_PRESS_LPS331AP_BDU_MASK 0x04 #define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR 0x22 @@ -67,9 +70,14 @@ #define ST_PRESS_LPS331AP_OD_IRQ_ADDR 0x22 #define ST_PRESS_LPS331AP_OD_IRQ_MASK 0x40 #define ST_PRESS_LPS331AP_MULTIREAD_BIT true -#define ST_PRESS_LPS331AP_TEMP_OFFSET 42500 /* CUSTOM VALUES FOR LPS001WP SENSOR */ + +/* LPS001WP pressure resolution */ +#define ST_PRESS_LPS001WP_LSB_PER_MBAR 16UL +/* LPS001WP temperature resolution */ +#define ST_PRESS_LPS001WP_LSB_PER_CELSIUS 64UL + #define ST_PRESS_LPS001WP_WAI_EXP 0xba #define ST_PRESS_LPS001WP_ODR_ADDR 0x20 #define ST_PRESS_LPS001WP_ODR_MASK 0x30 @@ -78,6 +86,8 @@ #define ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL 0x03 #define ST_PRESS_LPS001WP_PW_ADDR 0x20 #define ST_PRESS_LPS001WP_PW_MASK 0x40 +#define ST_PRESS_LPS001WP_FS_AVL_PRESS_GAIN \ + (100000000UL / ST_PRESS_LPS001WP_LSB_PER_MBAR) #define ST_PRESS_LPS001WP_BDU_ADDR 0x20 #define ST_PRESS_LPS001WP_BDU_MASK 0x04 #define ST_PRESS_LPS001WP_MULTIREAD_BIT true @@ -94,11 +104,6 @@ #define ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL 0x04 #define ST_PRESS_LPS25H_PW_ADDR 0x20 #define ST_PRESS_LPS25H_PW_MASK 0x80 -#define ST_PRESS_LPS25H_FS_ADDR 0x00 -#define ST_PRESS_LPS25H_FS_MASK 0x00 -#define ST_PRESS_LPS25H_FS_AVL_1260_VAL 0x00 -#define ST_PRESS_LPS25H_FS_AVL_1260_GAIN ST_PRESS_KPASCAL_NANO_SCALE -#define ST_PRESS_LPS25H_FS_AVL_TEMP_GAIN ST_PRESS_CELSIUS_NANO_SCALE #define ST_PRESS_LPS25H_BDU_ADDR 0x20 #define ST_PRESS_LPS25H_BDU_MASK 0x04 #define ST_PRESS_LPS25H_DRDY_IRQ_ADDR 0x23 @@ -109,7 +114,6 @@ #define ST_PRESS_LPS25H_OD_IRQ_ADDR 0x22 #define ST_PRESS_LPS25H_OD_IRQ_MASK 0x40 #define ST_PRESS_LPS25H_MULTIREAD_BIT true -#define ST_PRESS_LPS25H_TEMP_OFFSET 42500 #define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28 #define ST_TEMP_LPS25H_OUT_L_ADDR 0x2b @@ -161,7 +165,9 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = { .storagebits = 16, .endianness = IIO_LE, }, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), .modified = 0, }, { @@ -177,7 +183,7 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = { }, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_SCALE), .modified = 0, }, IIO_CHAN_SOFT_TIMESTAMP(1) @@ -212,11 +218,14 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .addr = ST_PRESS_LPS331AP_FS_ADDR, .mask = ST_PRESS_LPS331AP_FS_MASK, .fs_avl = { + /* + * Pressure and temperature sensitivity values + * as defined in table 3 of LPS331AP datasheet. + */ [0] = { .num = ST_PRESS_FS_AVL_1260MB, - .value = ST_PRESS_LPS331AP_FS_AVL_1260_VAL, - .gain = ST_PRESS_LPS331AP_FS_AVL_1260_GAIN, - .gain2 = ST_PRESS_LPS331AP_FS_AVL_TEMP_GAIN, + .gain = ST_PRESS_KPASCAL_NANO_SCALE, + .gain2 = ST_PRESS_LSB_PER_CELSIUS, }, }, }, @@ -261,7 +270,17 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, }, .fs = { - .addr = 0, + .fs_avl = { + /* + * Pressure and temperature resolution values + * as defined in table 3 of LPS001WP datasheet. + */ + [0] = { + .num = ST_PRESS_FS_AVL_1100MB, + .gain = ST_PRESS_LPS001WP_FS_AVL_PRESS_GAIN, + .gain2 = ST_PRESS_LPS001WP_LSB_PER_CELSIUS, + }, + }, }, .bdu = { .addr = ST_PRESS_LPS001WP_BDU_ADDR, @@ -298,14 +317,15 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, }, .fs = { - .addr = ST_PRESS_LPS25H_FS_ADDR, - .mask = ST_PRESS_LPS25H_FS_MASK, .fs_avl = { + /* + * Pressure and temperature sensitivity values + * as defined in table 3 of LPS25H datasheet. + */ [0] = { .num = ST_PRESS_FS_AVL_1260MB, - .value = ST_PRESS_LPS25H_FS_AVL_1260_VAL, - .gain = ST_PRESS_LPS25H_FS_AVL_1260_GAIN, - .gain2 = ST_PRESS_LPS25H_FS_AVL_TEMP_GAIN, + .gain = ST_PRESS_KPASCAL_NANO_SCALE, + .gain2 = ST_PRESS_LSB_PER_CELSIUS, }, }, }, @@ -364,26 +384,26 @@ static int st_press_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: - *val = 0; - switch (ch->type) { case IIO_PRESSURE: + *val = 0; *val2 = press_data->current_fullscale->gain; - break; + return IIO_VAL_INT_PLUS_NANO; case IIO_TEMP: + *val = MCELSIUS_PER_CELSIUS; *val2 = press_data->current_fullscale->gain2; - break; + return IIO_VAL_FRACTIONAL; default: err = -EINVAL; goto read_error; } - return IIO_VAL_INT_PLUS_NANO; case IIO_CHAN_INFO_OFFSET: switch (ch->type) { case IIO_TEMP: - *val = 425; - *val2 = 10; + *val = ST_PRESS_MILLI_CELSIUS_OFFSET * + press_data->current_fullscale->gain2; + *val2 = MCELSIUS_PER_CELSIUS; break; default: err = -EINVAL; -- cgit v1.2.3 From 09bc0ddaab6cab0fa95a67d5535ec772e2671193 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Thu, 26 May 2016 19:55:06 -0700 Subject: iio: humidity: hdc100x: fix IIO_TEMP channel reporting IIO_TEMP channel was being incorrectly reported back as Celsius when it should have been milliCelsius. This is via an incorrect scale value being returned to userspace. Signed-off-by: Matt Ranostay Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/hdc100x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c index 59aa1cbdc2fd..30709838dcdc 100644 --- a/drivers/iio/humidity/hdc100x.c +++ b/drivers/iio/humidity/hdc100x.c @@ -211,7 +211,7 @@ static int hdc100x_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SCALE: if (chan->type == IIO_TEMP) { - *val = 165; + *val = 165000; *val2 = 65536 >> 2; return IIO_VAL_FRACTIONAL; } else { -- cgit v1.2.3 From 13c27e946ddc0e19f3d8b307b14cd8053fcb4844 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 25 May 2016 09:40:26 +0200 Subject: iio: bh1780: dereference the client properly The code in runtime_[suspend|resume] was assuming that the i2c client data was the bh1780 state container, but it contains the IIO device. So first dereference the IIO device from the i2c client, then get the state container using the iio_priv() call. Fixes: 1f0477f18306 ("iio: light: new driver for the ROHM BH1780") Signed-off-by: Linus Walleij Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/light/bh1780.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/bh1780.c b/drivers/iio/light/bh1780.c index f83595334ff1..5fd432df2c8f 100644 --- a/drivers/iio/light/bh1780.c +++ b/drivers/iio/light/bh1780.c @@ -226,7 +226,8 @@ static int bh1780_remove(struct i2c_client *client) static int bh1780_runtime_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); - struct bh1780_data *bh1780 = i2c_get_clientdata(client); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct bh1780_data *bh1780 = iio_priv(indio_dev); int ret; ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_POFF); @@ -241,7 +242,8 @@ static int bh1780_runtime_suspend(struct device *dev) static int bh1780_runtime_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); - struct bh1780_data *bh1780 = i2c_get_clientdata(client); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct bh1780_data *bh1780 = iio_priv(indio_dev); int ret; ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_PON); -- cgit v1.2.3 From 0dd09ca419d712d315ffd864158f515e6c64261a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 25 May 2016 09:40:27 +0200 Subject: iio: light: bh1780: assign a static name Using the struct i2c_device->id field for naming the light sensor is a bad idea: when booting from the pure device tree this is NULL and that causes the device not to have the "name" property in sysfs and that in turn confuses the "lsiio" command to stop listing devices. So instead of using the device .id, use the hard string "bh1780", which works just fine. Fixes: 1f0477f18306 ("iio: light: new driver for the ROHM BH1780") Signed-off-by: Linus Walleij Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/light/bh1780.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/light/bh1780.c b/drivers/iio/light/bh1780.c index 5fd432df2c8f..b54dcba05a82 100644 --- a/drivers/iio/light/bh1780.c +++ b/drivers/iio/light/bh1780.c @@ -187,7 +187,7 @@ static int bh1780_probe(struct i2c_client *client, indio_dev->dev.parent = &client->dev; indio_dev->info = &bh1780_info; - indio_dev->name = id->name; + indio_dev->name = "bh1780"; indio_dev->channels = bh1780_channels; indio_dev->num_channels = ARRAY_SIZE(bh1780_channels); indio_dev->modes = INDIO_DIRECT_MODE; -- cgit v1.2.3 From 65925b65ed98ffdb277cf5ea1af45731dac0b30b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 21 May 2016 20:43:16 +0200 Subject: iio: st_sensors: switch to a threaded interrupt commit 98ad8b41f58dff6b30713d7f09ae3834b8df7ded ("iio: st_sensors: verify interrupt event to status") caused a regression when reading ST sensors from a HRTimer trigger rather than the intrinsic interrupts: the HRTimer may trigger faster than the sensor provides new values, and as the check against new values available as a cause of the interrupt trigger was done in the poll function, this would bail out of the HRTimer interrupt with IRQ_NONE. So clearly we need to only check the new values available from the proper interrupt handler and not from the poll function, which should rather just read the raw values from the registers, put them into the buffer and be happy. To achieve this: switch the ST Sensors over to using a true threaded interrupt handler. In the interrupt thread, check if new values are available, else yield to the (potential) next device on the same interrupt line to check the registers. If the interrupt was ours, proceed to poll the values. Instead of relying on iio_trigger_generic_data_rdy_poll() as a top half to wake up the thread that polls the sensor for new data, have the thread call iio_trigger_poll_chained() after determining that is is the proper source of the interrupt. This is modelled on drivers/iio/accel/mma8452.c which is already using a properly threaded interrupt handler. In order to get the same precision in timestamps as previously, where samples would be timestamped in the poll function pf->timestamp when calling iio_trigger_generic_data_rdy_poll() we introduce a local timestamp in the sensor data, set it in the top half (fastpath) of the interrupt handler and provide that to the core when calling iio_push_to_buffers_with_timestamp(). Additionally: if the active scanmask is not set for the sensor no IRQs should be enabled and we need to bail out with IRQ_NONE. This can happen if spurious IRQs fire when installing the threaded interrupt handler. Tested with hard interrupt triggers on LIS331DL, then also tested with hrtimers on the same sensor by creating a 75Hz HRTimer and using it to poll the sensor. Signed-off-by: Linus Walleij Cc: Giuseppe Barba Cc: Denis Ciocca Reported-by: Crestez Dan Leonard Tested-by: Crestez Dan Leonard Tested-by: Jonathan Cameron Fixes: 97865fe41322 ("iio: st_sensors: verify interrupt event to status") Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_buffer.c | 2 +- drivers/iio/accel/st_accel_core.c | 1 + drivers/iio/common/st_sensors/st_sensors_buffer.c | 25 ++---- drivers/iio/common/st_sensors/st_sensors_core.c | 3 + drivers/iio/common/st_sensors/st_sensors_trigger.c | 88 +++++++++++++++++++++- drivers/iio/gyro/st_gyro_buffer.c | 2 +- drivers/iio/gyro/st_gyro_core.c | 1 + drivers/iio/magnetometer/st_magn_buffer.c | 2 +- drivers/iio/magnetometer/st_magn_core.c | 1 + drivers/iio/pressure/st_pressure_buffer.c | 2 +- drivers/iio/pressure/st_pressure_core.c | 1 + include/linux/iio/common/st_sensors.h | 9 ++- 12 files changed, 111 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c index a1e642ee13d6..7fddc137e91e 100644 --- a/drivers/iio/accel/st_accel_buffer.c +++ b/drivers/iio/accel/st_accel_buffer.c @@ -91,7 +91,7 @@ static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = { int st_accel_allocate_ring(struct iio_dev *indio_dev) { - return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + return iio_triggered_buffer_setup(indio_dev, NULL, &st_sensors_trigger_handler, &st_accel_buffer_setup_ops); } diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index dc73f2d85e6d..4d95bfc4786c 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -741,6 +741,7 @@ static const struct iio_info accel_info = { static const struct iio_trigger_ops st_accel_trigger_ops = { .owner = THIS_MODULE, .set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE, + .validate_device = st_sensors_validate_device, }; #define ST_ACCEL_TRIGGER_OPS (&st_accel_trigger_ops) #else diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c index c55898543a47..f1693dbebb8a 100644 --- a/drivers/iio/common/st_sensors/st_sensors_buffer.c +++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c @@ -57,31 +57,20 @@ irqreturn_t st_sensors_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct st_sensor_data *sdata = iio_priv(indio_dev); + s64 timestamp; - /* If we have a status register, check if this IRQ came from us */ - if (sdata->sensor_settings->drdy_irq.addr_stat_drdy) { - u8 status; - - len = sdata->tf->read_byte(&sdata->tb, sdata->dev, - sdata->sensor_settings->drdy_irq.addr_stat_drdy, - &status); - if (len < 0) - dev_err(sdata->dev, "could not read channel status\n"); - - /* - * If this was not caused by any channels on this sensor, - * return IRQ_NONE - */ - if (!(status & (u8)indio_dev->active_scan_mask[0])) - return IRQ_NONE; - } + /* If we do timetamping here, do it before reading the values */ + if (sdata->hw_irq_trigger) + timestamp = sdata->hw_timestamp; + else + timestamp = iio_get_time_ns(); len = st_sensors_get_buffer_element(indio_dev, sdata->buffer_data); if (len < 0) goto st_sensors_get_buffer_element_error; iio_push_to_buffers_with_timestamp(indio_dev, sdata->buffer_data, - pf->timestamp); + timestamp); st_sensors_get_buffer_element_error: iio_trigger_notify_done(indio_dev->trig); diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index dffe00692169..928ee68fcc5f 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -424,6 +424,9 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable) else drdy_mask = sdata->sensor_settings->drdy_irq.mask_int2; + /* Flag to the poll function that the hardware trigger is in use */ + sdata->hw_irq_trigger = enable; + /* Enable/Disable the interrupt generator for data ready. */ err = st_sensors_write_data_with_mask(indio_dev, sdata->sensor_settings->drdy_irq.addr, diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index da72279fcf99..1f59bcc0f143 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -17,6 +17,73 @@ #include #include "st_sensors_core.h" +/** + * st_sensors_irq_handler() - top half of the IRQ-based triggers + * @irq: irq number + * @p: private handler data + */ +irqreturn_t st_sensors_irq_handler(int irq, void *p) +{ + struct iio_trigger *trig = p; + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct st_sensor_data *sdata = iio_priv(indio_dev); + + /* Get the time stamp as close in time as possible */ + sdata->hw_timestamp = iio_get_time_ns(); + return IRQ_WAKE_THREAD; +} + +/** + * st_sensors_irq_thread() - bottom half of the IRQ-based triggers + * @irq: irq number + * @p: private handler data + */ +irqreturn_t st_sensors_irq_thread(int irq, void *p) +{ + struct iio_trigger *trig = p; + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct st_sensor_data *sdata = iio_priv(indio_dev); + int ret; + + /* + * If this trigger is backed by a hardware interrupt and we have a + * status register, check if this IRQ came from us + */ + if (sdata->sensor_settings->drdy_irq.addr_stat_drdy) { + u8 status; + + ret = sdata->tf->read_byte(&sdata->tb, sdata->dev, + sdata->sensor_settings->drdy_irq.addr_stat_drdy, + &status); + if (ret < 0) { + dev_err(sdata->dev, "could not read channel status\n"); + goto out_poll; + } + /* + * the lower bits of .active_scan_mask[0] is directly mapped + * to the channels on the sensor: either bit 0 for + * one-dimensional sensors, or e.g. x,y,z for accelerometers, + * gyroscopes or magnetometers. No sensor use more than 3 + * channels, so cut the other status bits here. + */ + status &= 0x07; + + /* + * If this was not caused by any channels on this sensor, + * return IRQ_NONE + */ + if (!indio_dev->active_scan_mask) + return IRQ_NONE; + if (!(status & (u8)indio_dev->active_scan_mask[0])) + return IRQ_NONE; + } + +out_poll: + /* It's our IRQ: proceed to handle the register polling */ + iio_trigger_poll_chained(p); + return IRQ_HANDLED; +} + int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops) { @@ -77,9 +144,12 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, sdata->sensor_settings->drdy_irq.addr_stat_drdy) irq_trig |= IRQF_SHARED; - err = request_threaded_irq(irq, - iio_trigger_generic_data_rdy_poll, - NULL, + /* Let's create an interrupt thread masking the hard IRQ here */ + irq_trig |= IRQF_ONESHOT; + + err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev), + st_sensors_irq_handler, + st_sensors_irq_thread, irq_trig, sdata->trig->name, sdata->trig); @@ -119,6 +189,18 @@ void st_sensors_deallocate_trigger(struct iio_dev *indio_dev) } EXPORT_SYMBOL(st_sensors_deallocate_trigger); +int st_sensors_validate_device(struct iio_trigger *trig, + struct iio_dev *indio_dev) +{ + struct iio_dev *indio = iio_trigger_get_drvdata(trig); + + if (indio != indio_dev) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL(st_sensors_validate_device); + MODULE_AUTHOR("Denis Ciocca "); MODULE_DESCRIPTION("STMicroelectronics ST-sensors trigger"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/gyro/st_gyro_buffer.c b/drivers/iio/gyro/st_gyro_buffer.c index d67b17b6a7aa..a5377044e42f 100644 --- a/drivers/iio/gyro/st_gyro_buffer.c +++ b/drivers/iio/gyro/st_gyro_buffer.c @@ -91,7 +91,7 @@ static const struct iio_buffer_setup_ops st_gyro_buffer_setup_ops = { int st_gyro_allocate_ring(struct iio_dev *indio_dev) { - return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + return iio_triggered_buffer_setup(indio_dev, NULL, &st_sensors_trigger_handler, &st_gyro_buffer_setup_ops); } diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 52a3c87c375c..a8012955a1f6 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -409,6 +409,7 @@ static const struct iio_info gyro_info = { static const struct iio_trigger_ops st_gyro_trigger_ops = { .owner = THIS_MODULE, .set_trigger_state = ST_GYRO_TRIGGER_SET_STATE, + .validate_device = st_sensors_validate_device, }; #define ST_GYRO_TRIGGER_OPS (&st_gyro_trigger_ops) #else diff --git a/drivers/iio/magnetometer/st_magn_buffer.c b/drivers/iio/magnetometer/st_magn_buffer.c index ecd3bd0a9769..0a9e8fadfa9d 100644 --- a/drivers/iio/magnetometer/st_magn_buffer.c +++ b/drivers/iio/magnetometer/st_magn_buffer.c @@ -82,7 +82,7 @@ static const struct iio_buffer_setup_ops st_magn_buffer_setup_ops = { int st_magn_allocate_ring(struct iio_dev *indio_dev) { - return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + return iio_triggered_buffer_setup(indio_dev, NULL, &st_sensors_trigger_handler, &st_magn_buffer_setup_ops); } diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index 62036d2a9956..8250fc322c56 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -572,6 +572,7 @@ static const struct iio_info magn_info = { static const struct iio_trigger_ops st_magn_trigger_ops = { .owner = THIS_MODULE, .set_trigger_state = ST_MAGN_TRIGGER_SET_STATE, + .validate_device = st_sensors_validate_device, }; #define ST_MAGN_TRIGGER_OPS (&st_magn_trigger_ops) #else diff --git a/drivers/iio/pressure/st_pressure_buffer.c b/drivers/iio/pressure/st_pressure_buffer.c index 2ff53f222352..99468d0a64e7 100644 --- a/drivers/iio/pressure/st_pressure_buffer.c +++ b/drivers/iio/pressure/st_pressure_buffer.c @@ -82,7 +82,7 @@ static const struct iio_buffer_setup_ops st_press_buffer_setup_ops = { int st_press_allocate_ring(struct iio_dev *indio_dev) { - return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + return iio_triggered_buffer_setup(indio_dev, NULL, &st_sensors_trigger_handler, &st_press_buffer_setup_ops); } diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 257b58ac6779..92a118c3c4ac 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -445,6 +445,7 @@ static const struct iio_info press_info = { static const struct iio_trigger_ops st_press_trigger_ops = { .owner = THIS_MODULE, .set_trigger_state = ST_PRESS_TRIGGER_SET_STATE, + .validate_device = st_sensors_validate_device, }; #define ST_PRESS_TRIGGER_OPS (&st_press_trigger_ops) #else diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index d029ffac0d69..99403b19092f 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -223,6 +223,8 @@ struct st_sensor_settings { * @get_irq_data_ready: Function to get the IRQ used for data ready signal. * @tf: Transfer function structure used by I/O operations. * @tb: Transfer buffers and mutex used by I/O operations. + * @hw_irq_trigger: if we're using the hardware interrupt on the sensor. + * @hw_timestamp: Latest timestamp from the interrupt handler, when in use. */ struct st_sensor_data { struct device *dev; @@ -247,6 +249,9 @@ struct st_sensor_data { const struct st_sensor_transfer_function *tf; struct st_sensor_transfer_buffer tb; + + bool hw_irq_trigger; + s64 hw_timestamp; }; #ifdef CONFIG_IIO_BUFFER @@ -260,7 +265,8 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops); void st_sensors_deallocate_trigger(struct iio_dev *indio_dev); - +int st_sensors_validate_device(struct iio_trigger *trig, + struct iio_dev *indio_dev); #else static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops) @@ -271,6 +277,7 @@ static inline void st_sensors_deallocate_trigger(struct iio_dev *indio_dev) { return; } +#define st_sensors_validate_device NULL #endif int st_sensors_init_sensor(struct iio_dev *indio_dev, -- cgit v1.2.3 From ff05916f94f912b25e8efcf9b02c10d481977bab Mon Sep 17 00:00:00 2001 From: Crestez Dan Leonard Date: Fri, 13 May 2016 21:43:33 +0300 Subject: iio: st_sensors: Init trigger before irq request This fixes a possible race where an interrupt arrives before complete initialization and crashes because iio_trigger_get_drvdata returns NULL. Cc: Giuseppe Barba Cc: Denis Ciocca Signed-off-by: Crestez Dan Leonard Reviewed-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/common/st_sensors/st_sensors_trigger.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index 1f59bcc0f143..296e4ff19ae8 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -97,6 +97,10 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, return -ENOMEM; } + iio_trigger_set_drvdata(sdata->trig, indio_dev); + sdata->trig->ops = trigger_ops; + sdata->trig->dev.parent = sdata->dev; + irq = sdata->get_irq_data_ready(indio_dev); irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); /* @@ -158,10 +162,6 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, goto iio_trigger_free; } - iio_trigger_set_drvdata(sdata->trig, indio_dev); - sdata->trig->ops = trigger_ops; - sdata->trig->dev.parent = sdata->dev; - err = iio_trigger_register(sdata->trig); if (err < 0) { dev_err(&indio_dev->dev, "failed to register iio trigger.\n"); -- cgit v1.2.3 From 99147606155f09feccac67c65387dc62260b749b Mon Sep 17 00:00:00 2001 From: Crestez Dan Leonard Date: Fri, 13 May 2016 21:43:34 +0300 Subject: iio: st_sensors: Disable DRDY at init time This fixes odd behavior after reboot. The fact that we set the device to powerdown mode is not sufficient to prevent DRDY being active because we might still have an unread sample. Even if powerdown was sufficient keeping DRDY disabled while trigger is not active is a good idea. Cc: Giuseppe Barba Cc: Denis Ciocca Signed-off-by: Crestez Dan Leonard Reviewed-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/common/st_sensors/st_sensors_core.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 928ee68fcc5f..9e59c90f6a8d 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -363,6 +363,11 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev, if (err < 0) return err; + /* Disable DRDY, this might be still be enabled after reboot. */ + err = st_sensors_set_dataready_irq(indio_dev, false); + if (err < 0) + return err; + if (sdata->current_fullscale) { err = st_sensors_set_fullscale(indio_dev, sdata->current_fullscale->num); -- cgit v1.2.3 From 4a9723e8df68cfce4048517ee32e37f78854b6fb Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Thu, 12 May 2016 16:54:08 +0200 Subject: dmaengine: at_xdmac: align descriptors on 64 bits Having descriptors aligned on 64 bits allows update CNDA and CUBC in an atomic way. Signed-off-by: Ludovic Desroches Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Cc: stable@vger.kernel.org #v4.1 and later Reviewed-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_xdmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index 8e304b1befc5..ba9b0b73fa47 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -242,7 +242,7 @@ struct at_xdmac_lld { u32 mbr_dus; /* Destination Microblock Stride Register */ }; - +/* 64-bit alignment needed to update CNDA and CUBC registers in an atomic way. */ struct at_xdmac_desc { struct at_xdmac_lld lld; enum dma_transfer_direction direction; @@ -253,7 +253,7 @@ struct at_xdmac_desc { unsigned int xfer_size; struct list_head descs_list; struct list_head xfer_node; -}; +} __aligned(sizeof(u64)); static inline void __iomem *at_xdmac_chan_reg_base(struct at_xdmac *atxdmac, unsigned int chan_nb) { -- cgit v1.2.3 From 53398f488821c2b5b15291e3debec6ad33f75d3d Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Thu, 12 May 2016 16:54:09 +0200 Subject: dmaengine: at_xdmac: fix residue corruption An unexpected value of CUBC can lead to a corrupted residue. A more complex sequence is needed to detect an inaccurate value for NCA or CUBC. Signed-off-by: Ludovic Desroches Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Cc: stable@vger.kernel.org #v4.1 and later Reviewed-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_xdmac.c | 54 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 32 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index ba9b0b73fa47..b02494e115fe 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -1400,6 +1400,7 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, u32 cur_nda, check_nda, cur_ubc, mask, value; u8 dwidth = 0; unsigned long flags; + bool initd; ret = dma_cookie_status(chan, cookie, txstate); if (ret == DMA_COMPLETE) @@ -1435,34 +1436,43 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, } /* - * When processing the residue, we need to read two registers but we - * can't do it in an atomic way. AT_XDMAC_CNDA is used to find where - * we stand in the descriptor list and AT_XDMAC_CUBC is used - * to know how many data are remaining for the current descriptor. - * Since the dma channel is not paused to not loose data, between the - * AT_XDMAC_CNDA and AT_XDMAC_CUBC read, we may have change of - * descriptor. - * For that reason, after reading AT_XDMAC_CUBC, we check if we are - * still using the same descriptor by reading a second time - * AT_XDMAC_CNDA. If AT_XDMAC_CNDA has changed, it means we have to - * read again AT_XDMAC_CUBC. + * The easiest way to compute the residue should be to pause the DMA + * but doing this can lead to miss some data as some devices don't + * have FIFO. + * We need to read several registers because: + * - DMA is running therefore a descriptor change is possible while + * reading these registers + * - When the block transfer is done, the value of the CUBC register + * is set to its initial value until the fetch of the next descriptor. + * This value will corrupt the residue calculation so we have to skip + * it. + * + * INITD -------- ------------ + * |____________________| + * _______________________ _______________ + * NDA @desc2 \/ @desc3 + * _______________________/\_______________ + * __________ ___________ _______________ + * CUBC 0 \/ MAX desc1 \/ MAX desc2 + * __________/\___________/\_______________ + * + * Since descriptors are aligned on 64 bits, we can assume that + * the update of NDA and CUBC is atomic. * Memory barriers are used to ensure the read order of the registers. - * A max number of retries is set because unlikely it can never ends if - * we are transferring a lot of data with small buffers. + * A max number of retries is set because unlikely it could never ends. */ - cur_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc; - rmb(); - cur_ubc = at_xdmac_chan_read(atchan, AT_XDMAC_CUBC); for (retry = 0; retry < AT_XDMAC_RESIDUE_MAX_RETRIES; retry++) { - rmb(); check_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc; - - if (likely(cur_nda == check_nda)) - break; - - cur_nda = check_nda; + rmb(); + initd = !!(at_xdmac_chan_read(atchan, AT_XDMAC_CC) & AT_XDMAC_CC_INITD); rmb(); cur_ubc = at_xdmac_chan_read(atchan, AT_XDMAC_CUBC); + rmb(); + cur_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc; + rmb(); + + if ((check_nda == cur_nda) && initd) + break; } if (unlikely(retry >= AT_XDMAC_RESIDUE_MAX_RETRIES)) { -- cgit v1.2.3 From 9295c41d77ca93aac79cfca6fa09fa1ca5cab66f Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Thu, 12 May 2016 16:54:10 +0200 Subject: dmaengine: at_xdmac: double FIFO flush needed to compute residue Due to the way CUBC register is updated, a double flush is needed to compute an accurate residue. First flush aim is to get data from the DMA FIFO and second one ensures that we won't report data which are not in memory. Signed-off-by: Ludovic Desroches Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Cc: stable@vger.kernel.org #v4.1 and later Reviewed-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_xdmac.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index b02494e115fe..75bd6621dc5d 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -1425,7 +1425,16 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, residue = desc->xfer_size; /* * Flush FIFO: only relevant when the transfer is source peripheral - * synchronized. + * synchronized. Flush is needed before reading CUBC because data in + * the FIFO are not reported by CUBC. Reporting a residue of the + * transfer length while we have data in FIFO can cause issue. + * Usecase: atmel USART has a timeout which means I have received + * characters but there is no more character received for a while. On + * timeout, it requests the residue. If the data are in the DMA FIFO, + * we will return a residue of the transfer length. It means no data + * received. If an application is waiting for these data, it will hang + * since we won't have another USART timeout without receiving new + * data. */ mask = AT_XDMAC_CC_TYPE | AT_XDMAC_CC_DSYNC; value = AT_XDMAC_CC_TYPE_PER_TRAN | AT_XDMAC_CC_DSYNC_PER2MEM; @@ -1480,6 +1489,19 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, goto spin_unlock; } + /* + * Flush FIFO: only relevant when the transfer is source peripheral + * synchronized. Another flush is needed here because CUBC is updated + * when the controller sends the data write command. It can lead to + * report data that are not written in the memory or the device. The + * FIFO flush ensures that data are really written. + */ + if ((desc->lld.mbr_cfg & mask) == value) { + at_xdmac_write(atxdmac, AT_XDMAC_GSWF, atchan->mask); + while (!(at_xdmac_chan_read(atchan, AT_XDMAC_CIS) & AT_XDMAC_CIS_FIS)) + cpu_relax(); + } + /* * Remove size of all microblocks already transferred and the current * one. Then add the remaining size to transfer of the current -- cgit v1.2.3 From bebef39842c8615180e711c0ff3e8c9c40c397da Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 2 May 2016 12:59:48 +0200 Subject: drm/sun4i: add COMMON_CLK dependency The sun4i drm driver uses the clk-provider interfaces, which are not available when CONFIG_COMMON_CLK is disabled: drivers/gpu/drm/sun4i/sun4i_dotclock.c:19:16: error: field 'hw' has incomplete type struct clk_hw hw; In file included from ../include/asm-generic/bug.h:13:0, from ../arch/arm/include/asm/bug.h:59, from ../include/linux/bug.h:4, from ../include/linux/io.h:23, from ../include/linux/clk-provider.h:14, from ../drivers/gpu/drm/sun4i/sun4i_dotclock.c:13: drivers/gpu/drm/sun4i/sun4i_dotclock.c: In function 'hw_to_dclk': include/linux/kernel.h:831:48: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] ... This adds a Kconfig dependency to prevent the driver from being enabled in this case. Signed-off-by: Arnd Bergmann Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig index 99510e64e91a..a4b357db8856 100644 --- a/drivers/gpu/drm/sun4i/Kconfig +++ b/drivers/gpu/drm/sun4i/Kconfig @@ -1,6 +1,6 @@ config DRM_SUN4I tristate "DRM Support for Allwinner A10 Display Engine" - depends on DRM && ARM + depends on DRM && ARM && COMMON_CLK depends on ARCH_SUNXI || COMPILE_TEST select DRM_GEM_CMA_HELPER select DRM_KMS_HELPER -- cgit v1.2.3 From f1b78f0e759b174ec4f5e3b0dd27a079a2416b66 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 3 May 2016 17:23:28 +0200 Subject: drm: sun4i: print DMA address correctly The newly added sun4i drm driver prints a dma address using the %x format string, which cannot work when dma_addr_t is 64 bit, and gcc warns about this configuration: drm/sun4i/sun4i_backend.c: In function 'sun4i_backend_update_layer_buffer': drm/sun4i/sun4i_backend.c:193:84: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=] DRM_DEBUG_DRIVER("Using GEM @ 0x%x\n", gem->paddr); drm/sun4i/sun4i_backend.c:201:84: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=] DRM_DEBUG_DRIVER("Setting buffer address to 0x%x\n", paddr); This changes the code to use the explicit %pad format string, which always prints the right length. Signed-off-by: Arnd Bergmann Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_backend.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c index f7a15c1a93bf..3ab560450a82 100644 --- a/drivers/gpu/drm/sun4i/sun4i_backend.c +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c @@ -190,7 +190,7 @@ int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend, /* Get the physical address of the buffer in memory */ gem = drm_fb_cma_get_gem_obj(fb, 0); - DRM_DEBUG_DRIVER("Using GEM @ 0x%x\n", gem->paddr); + DRM_DEBUG_DRIVER("Using GEM @ %pad\n", &gem->paddr); /* Compute the start of the displayed memory */ bpp = drm_format_plane_cpp(fb->pixel_format, 0); @@ -198,7 +198,7 @@ int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend, paddr += (state->src_x >> 16) * bpp; paddr += (state->src_y >> 16) * fb->pitches[0]; - DRM_DEBUG_DRIVER("Setting buffer address to 0x%x\n", paddr); + DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &paddr); /* Write the 32 lower bits of the address (in bits) */ lo_paddr = paddr << 3; -- cgit v1.2.3 From 9fa2568d9fe0c6dbf3253af6840de9389f4e89cb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 5 May 2016 22:10:52 +0200 Subject: drm: sun4i: fix probe error handling gcc points out a possible uninitialized variable use in sun4i_dclk_create(): drivers/gpu/drm/sun4i/sun4i_dotclock.c: In function 'sun4i_dclk_create': drivers/gpu/drm/sun4i/sun4i_dotclock.c:139:12: error: 'clk_name' may be used uninitialized in this function [-Werror=maybe-uninitialized] init.name = clk_name; The warning only shows up when CONFIG_OF is disabled, and the property is never filled, but the same bug can show up even when CONFIG_OF is enabled but of_property_read_string_index returns another error. To fix it, this ensures that sun4i_dclk_create propagates any error from of_property_read_string_index. Signed-off-by: Arnd Bergmann Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_dotclock.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_dotclock.c b/drivers/gpu/drm/sun4i/sun4i_dotclock.c index 3ff668cb463c..6c9c090a8006 100644 --- a/drivers/gpu/drm/sun4i/sun4i_dotclock.c +++ b/drivers/gpu/drm/sun4i/sun4i_dotclock.c @@ -127,10 +127,14 @@ int sun4i_dclk_create(struct device *dev, struct sun4i_tcon *tcon) const char *clk_name, *parent_name; struct clk_init_data init; struct sun4i_dclk *dclk; + int ret; parent_name = __clk_get_name(tcon->sclk0); - of_property_read_string_index(dev->of_node, "clock-output-names", 0, - &clk_name); + ret = of_property_read_string_index(dev->of_node, + "clock-output-names", 0, + &clk_name); + if (ret) + return ret; dclk = devm_kzalloc(dev, sizeof(*dclk), GFP_KERNEL); if (!dclk) -- cgit v1.2.3 From 4731a72df273bdbd225445424057c15dbb8d3495 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 2 Apr 2016 12:30:11 +0200 Subject: drm/sun4i: request exact rates to our parents Our pixel clock currently only tries to deal with the current parent rate. While that works when the resolution is the same than the one already program, or when we can compute directly the rate from the current parent rate, it cannot work in most situation when we want to change the frequency, and we end up with an improper pixel clock rate, which obviously doesn't work as expected. Ask our parent for all the possible dividers if it can reach that frequency, and return the best parent rate to the clock framework so that we can use it. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_dotclock.c | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_dotclock.c b/drivers/gpu/drm/sun4i/sun4i_dotclock.c index 6c9c090a8006..5b3463197c48 100644 --- a/drivers/gpu/drm/sun4i/sun4i_dotclock.c +++ b/drivers/gpu/drm/sun4i/sun4i_dotclock.c @@ -72,14 +72,40 @@ static unsigned long sun4i_dclk_recalc_rate(struct clk_hw *hw, static long sun4i_dclk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate) { - return *parent_rate / DIV_ROUND_CLOSEST(*parent_rate, rate); + unsigned long best_parent = 0; + u8 best_div = 1; + int i; + + for (i = 6; i < 127; i++) { + unsigned long ideal = rate * i; + unsigned long rounded; + + rounded = clk_hw_round_rate(clk_hw_get_parent(hw), + ideal); + + if (rounded == ideal) { + best_parent = rounded; + best_div = i; + goto out; + } + + if ((rounded < ideal) && (rounded > best_parent)) { + best_parent = rounded; + best_div = i; + } + } + +out: + *parent_rate = best_parent; + + return best_parent / best_div; } static int sun4i_dclk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct sun4i_dclk *dclk = hw_to_dclk(hw); - int div = DIV_ROUND_CLOSEST(parent_rate, rate); + u8 div = parent_rate / rate; return regmap_update_bits(dclk->regmap, SUN4I_TCON0_DCLK_REG, GENMASK(6, 0), div); @@ -144,6 +170,7 @@ int sun4i_dclk_create(struct device *dev, struct sun4i_tcon *tcon) init.ops = &sun4i_dclk_ops; init.parent_names = &parent_name; init.num_parents = 1; + init.flags = CLK_SET_RATE_PARENT; dclk->regmap = tcon->regs; dclk->hw.init = &init; -- cgit v1.2.3 From bb43d40d7c830da5f623e3938fef908b003b7523 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 21 Apr 2016 11:25:26 +0200 Subject: drm/sun4i: rgb: Validate the clock rate Our pixel clock cannot reach a high enough rate for some rather high while common resolutions (like 1080p60). Make sure we filter the resolutions we cannot reach in our mode_valid function. Fixes: 29e57fab97fc ("drm: sun4i: Add RGB output") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_rgb.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c index ab6494818050..fe7ef52a9346 100644 --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -54,8 +54,13 @@ static int sun4i_rgb_get_modes(struct drm_connector *connector) static int sun4i_rgb_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct sun4i_rgb *rgb = drm_connector_to_sun4i_rgb(connector); + struct sun4i_drv *drv = rgb->drv; + struct sun4i_tcon *tcon = drv->tcon; u32 hsync = mode->hsync_end - mode->hsync_start; u32 vsync = mode->vsync_end - mode->vsync_start; + unsigned long rate = mode->clock * 1000; + long rounded_rate; DRM_DEBUG_DRIVER("Validating modes...\n"); @@ -87,6 +92,15 @@ static int sun4i_rgb_mode_valid(struct drm_connector *connector, DRM_DEBUG_DRIVER("Vertical parameters OK\n"); + rounded_rate = clk_round_rate(tcon->dclk, rate); + if (rounded_rate < rate) + return MODE_CLOCK_LOW; + + if (rounded_rate > rate) + return MODE_CLOCK_HIGH; + + DRM_DEBUG_DRIVER("Clock rate OK\n"); + return MODE_OK; } -- cgit v1.2.3 From 0bbbb00bda57e6f091275b0103445596322b9277 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 4 May 2016 17:38:32 +0200 Subject: drm/sun4i: defer only if we didn't find our panel Our code currently defers our probe on any error, even if we were not expecting to have one at all. Make sure we return -EPROBE_DEFER only when we were supposed to have a panel, but it's not probed yet. Also fix a typo while we're at it. Fixes: 29e57fab97fc ("drm: sun4i: Add RGB output") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 9f19b0e08560..16ab426ffa34 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -425,11 +425,11 @@ static struct drm_panel *sun4i_tcon_find_panel(struct device_node *node) remote = of_graph_get_remote_port_parent(end_node); if (!remote) { - DRM_DEBUG_DRIVER("Enable to parse remote node\n"); + DRM_DEBUG_DRIVER("Unable to parse remote node\n"); return ERR_PTR(-EINVAL); } - return of_drm_find_panel(remote); + return of_drm_find_panel(remote) ?: ERR_PTR(-EPROBE_DEFER); } static int sun4i_tcon_bind(struct device *dev, struct device *master, @@ -522,12 +522,13 @@ static int sun4i_tcon_probe(struct platform_device *pdev) * Defer the probe. */ panel = sun4i_tcon_find_panel(node); - if (IS_ERR(panel)) { - /* - * If we don't have a panel endpoint, just go on - */ - if (PTR_ERR(panel) != -ENODEV) - return -EPROBE_DEFER; + + /* + * If we don't have a panel endpoint, just go on + */ + if (PTR_ERR(panel) == -EPROBE_DEFER) { + DRM_DEBUG_DRIVER("Still waiting for our panel. Deferring...\n"); + return -EPROBE_DEFER; } return component_add(&pdev->dev, &sun4i_tcon_ops); -- cgit v1.2.3 From 0de6e914a035076b1241f5738c06c9d3820abd6e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 4 May 2016 17:37:58 +0200 Subject: drm/sun4i: rgb: panel is an error pointer In case of an error, our pointer to the drm_panel structure attached to our encoder will hold an error pointer, not a NULL pointer. Make sure we check the right thing. Fixes: 29e57fab97fc ("drm: sun4i: Add RGB output") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_rgb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c index fe7ef52a9346..aaffe9e64ffb 100644 --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -217,7 +217,7 @@ int sun4i_rgb_init(struct drm_device *drm) int ret; /* If we don't have a panel, there's no point in going on */ - if (!tcon->panel) + if (IS_ERR(tcon->panel)) return -ENODEV; rgb = devm_kzalloc(drm->dev, sizeof(*rgb), GFP_KERNEL); -- cgit v1.2.3 From 3d6bd9065b7acf8499d414d70bdb4b4955856299 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 11 May 2016 16:52:50 +0200 Subject: drm/sun4i: remove simplefb at probe If simplefb was setup by our bootloader and enabled in the DT, we will have a first framebuffer loaded in our system. However, as soon as our DRM driver will load, it will reset the controller, initialise it and, if the framebuffer emulation is enabled, register a second framebuffer device. This is obviously pretty bad, since the first framebuffer will be some kind of a black hole, with memory still reserved that we can write to safely, but not displayed anywhere. Make sure we remove that framebuffer when we probe so we don't end up in that situation. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_drv.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index 76e922bb60e5..af62b24c39b1 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -125,6 +125,22 @@ static struct drm_driver sun4i_drv_driver = { .disable_vblank = sun4i_drv_disable_vblank, }; +static void sun4i_remove_framebuffers(void) +{ + struct apertures_struct *ap; + + ap = alloc_apertures(1); + if (!ap) + return; + + /* The framebuffer can be located anywhere in RAM */ + ap->ranges[0].base = 0; + ap->ranges[0].size = ~0; + + remove_conflicting_framebuffers(ap, "sun4i-drm-fb", false); + kfree(ap); +} + static int sun4i_drv_bind(struct device *dev) { struct drm_device *drm; @@ -172,6 +188,9 @@ static int sun4i_drv_bind(struct device *dev) } drm->irq_enabled = true; + /* Remove early framebuffers (ie. simplefb) */ + sun4i_remove_framebuffers(); + /* Create our framebuffer */ drv->fbdev = sun4i_framebuffer_init(drm); if (IS_ERR(drv->fbdev)) { -- cgit v1.2.3 From 7aa2e2b731b337a7bc74cd076bbcd6b8b4b95fbf Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 11 May 2016 19:04:18 +0200 Subject: drm/sun4i: Convert to connector register helpers Now that connector register helpers have been created, switch to them. Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_drv.c | 31 ++----------------------------- 1 file changed, 2 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index af62b24c39b1..257d2b4f3645 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -24,34 +24,6 @@ #include "sun4i_layer.h" #include "sun4i_tcon.h" -static int sun4i_drv_connector_plug_all(struct drm_device *drm) -{ - struct drm_connector *connector, *failed; - int ret; - - mutex_lock(&drm->mode_config.mutex); - list_for_each_entry(connector, &drm->mode_config.connector_list, head) { - ret = drm_connector_register(connector); - if (ret) { - failed = connector; - goto err; - } - } - mutex_unlock(&drm->mode_config.mutex); - return 0; - -err: - list_for_each_entry(connector, &drm->mode_config.connector_list, head) { - if (failed == connector) - break; - - drm_connector_unregister(connector); - } - mutex_unlock(&drm->mode_config.mutex); - - return ret; -} - static int sun4i_drv_enable_vblank(struct drm_device *drm, unsigned int pipe) { struct sun4i_drv *drv = drm->dev_private; @@ -206,7 +178,7 @@ static int sun4i_drv_bind(struct device *dev) if (ret) goto free_drm; - ret = sun4i_drv_connector_plug_all(drm); + ret = drm_connector_register_all(drm); if (ret) goto unregister_drm; @@ -223,6 +195,7 @@ static void sun4i_drv_unbind(struct device *dev) { struct drm_device *drm = dev_get_drvdata(dev); + drm_connector_unregister_all(drm); drm_dev_unregister(drm); drm_kms_helper_poll_fini(drm); sun4i_framebuffer_free(drm); -- cgit v1.2.3 From 13fef095bde04228316046f997eb963285d8532e Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 17 May 2016 23:56:06 +0800 Subject: drm: sun4i: do cleanup if RGB output init fails sun4i_rgb_init() can fail, which results in TCON failing to bind. In this case we need to do cleanup, specificly unregistering the dotclock, which is regmap based, and the regmap is registered as part of the sun4i_tcon_bind(). Failing to do so results in a NULL pointer reference when the CCF tries to turn off unused clocks. Fixes: 29e57fab97fc ("drm: sun4i: Add RGB output") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 16ab426ffa34..652385f09735 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -490,7 +490,11 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, return 0; } - return sun4i_rgb_init(drm); + ret = sun4i_rgb_init(drm); + if (ret < 0) + goto err_free_clocks; + + return 0; err_free_clocks: sun4i_tcon_free_clocks(tcon); -- cgit v1.2.3 From 595144c1141c951a3c6bb9004ae6a2bc29aad66f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 17 May 2016 20:57:50 +0200 Subject: clk: rockchip: initialize flags of clk_init_data in mmc-phase clock The flags element of clk_init_data was never initialized for mmc- phase-clocks resulting in the element containing a random value and thus possibly enabling unwanted clock flags. Fixes: 89bf26cbc1a0 ("clk: rockchip: Add support for the mmc clock phases using the framework") Cc: stable@vger.kernel.org Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-mmc-phase.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c index bc856f21f6b2..460113008bd9 100644 --- a/drivers/clk/rockchip/clk-mmc-phase.c +++ b/drivers/clk/rockchip/clk-mmc-phase.c @@ -154,6 +154,7 @@ struct clk *rockchip_clk_register_mmc(const char *name, return ERR_PTR(-ENOMEM); init.name = name; + init.flags = 0; init.num_parents = num_parents; init.parent_names = parent_names; init.ops = &rockchip_mmc_clk_ops; -- cgit v1.2.3 From 176df69cb080c8cd813e51f800069e13ee607641 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 13 May 2016 11:42:16 -0700 Subject: clk: rockchip: mark rk3399 GIC clocks as critical We never want to kill the GIC. Noticed when making other clock fixups, and seeing the newly-constructed clock tree try to disable cpll, where we had this parent structure: aclk_gic <------\ |--- aclk_gic_pre <-- cpll <-- pll_cpll aclk_gic_noc <--/ Signed-off-by: Brian Norris Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 291543f52caa..145756c4f3c8 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -1466,6 +1466,8 @@ static struct rockchip_clk_branch rk3399_clk_pmu_branches[] __initdata = { static const char *const rk3399_cru_critical_clocks[] __initconst = { "aclk_cci_pre", + "aclk_gic", + "aclk_gic_noc", "pclk_perilp0", "pclk_perilp0", "hclk_perilp0", -- cgit v1.2.3 From 3bd14ae9da9194d369334556a70a7ff73ef94491 Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Fri, 13 May 2016 11:42:17 -0700 Subject: clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src There was a typo, swapping 'c' <--> 'g'. Signed-off-by: Xing Zheng Signed-off-by: Brian Norris Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 145756c4f3c8..9f86bfef70f7 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -832,9 +832,9 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = { RK3399_CLKGATE_CON(13), 1, GFLAGS), /* perihp */ - GATE(0, "cpll_aclk_perihp_src", "gpll", CLK_IGNORE_UNUSED, + GATE(0, "cpll_aclk_perihp_src", "cpll", CLK_IGNORE_UNUSED, RK3399_CLKGATE_CON(5), 0, GFLAGS), - GATE(0, "gpll_aclk_perihp_src", "cpll", CLK_IGNORE_UNUSED, + GATE(0, "gpll_aclk_perihp_src", "gpll", CLK_IGNORE_UNUSED, RK3399_CLKGATE_CON(5), 1, GFLAGS), COMPOSITE(ACLK_PERIHP, "aclk_perihp", mux_aclk_perihp_p, CLK_IGNORE_UNUSED, RK3399_CLKSEL_CON(14), 7, 1, MFLAGS, 0, 5, DFLAGS, -- cgit v1.2.3 From 4715f81afc342996f680b08c944a712d9cbef11b Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 12 May 2016 11:03:16 -0700 Subject: clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization" This reverts commit 7a03fe6f48f3 ("clk: rockchip: reset init state before mmc card initialization"). Though not totally obvious from the commit message nor from the source code, that commit appears to be trying to reset the "_drv" MMC clocks to 90 degrees (note that the "_sample" MMC clocks have a shift of 0 so are not touched). The major problem here is that it doesn't properly reset things. The phase is a two bit field and the commit only touches one of the two bits. Thus the commit had the following affect: - phase 0 => phase 90 - phase 90 => phase 90 - phase 180 => phase 270 - phase 270 => phase 270 Things get even weirder if you happen to have a bootloader that was actually using delay elements (should be no reason to, but you never know), since those are additional bits that weren't touched by the original patch. This is unlikely to be what we actually want. Checking on rk3288-veyron devices, I can see that the bootloader leaves these clocks as: - emmc: phase 180 - sdmmc: phase 90 - sdio0: phase 90 Thus on rk3288-veyron devices the commit we're reverting had the effect of changing the eMMC clock to phase 270. This probably explains the scattered reports I've heard of eMMC devices not working on some veyron devices when using the upstream kernel. The original commit was presumably made because previously the kernel didn't touch the "_drv" phase at all and relied on whatever value was there when the kernel started. If someone was using a bootloader that touched the "_drv" phase then, indeed, we should have code in the kernel to fix that. ...and also, to get ideal timings, we should also have the kernel change the phase depending on the speed mode. In fact, that's the subject of a recent patch I posted at . Ideally, we should take both the patch posted to dw_mmc and this revert. Since those will likely go through different trees, here I describe behavior with the combos: 1. Just this revert: likely will fix rk3288-veyron eMMC on some devices + other cases; might break someone with a strange bootloader that sets the phase to 0 or one that uses delay elements (pretty unpredicable what would happen in that case). 2. Just dw_mmc patch: fixes everyone. Effectly the dw_mmc patch will totally override the broken patch and fix everything. 3. Both patches: fixes everyone. Once dw_mmc is initting properly then any defaults from the clock code doesn't mattery. Fixes: 7a03fe6f48f3 ("clk: rockchip: reset init state before mmc card initialization") Signed-off-by: Douglas Anderson Reviewed-by: Shawn Lin [emmc and sdmmc still work on all current boards in mainline after this revert, so they should take precedence over any out-of-tree board that will hopefully again get fixed with the better upcoming dw_mmc change.] Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-mmc-phase.c | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c index 460113008bd9..077fcdc7908b 100644 --- a/drivers/clk/rockchip/clk-mmc-phase.c +++ b/drivers/clk/rockchip/clk-mmc-phase.c @@ -41,8 +41,6 @@ static unsigned long rockchip_mmc_recalc(struct clk_hw *hw, #define ROCKCHIP_MMC_DEGREE_MASK 0x3 #define ROCKCHIP_MMC_DELAYNUM_OFFSET 2 #define ROCKCHIP_MMC_DELAYNUM_MASK (0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET) -#define ROCKCHIP_MMC_INIT_STATE_RESET 0x1 -#define ROCKCHIP_MMC_INIT_STATE_SHIFT 1 #define PSECS_PER_SEC 1000000000000LL @@ -163,15 +161,6 @@ struct clk *rockchip_clk_register_mmc(const char *name, mmc_clock->reg = reg; mmc_clock->shift = shift; - /* - * Assert init_state to soft reset the CLKGEN - * for mmc tuning phase and degree - */ - if (mmc_clock->shift == ROCKCHIP_MMC_INIT_STATE_SHIFT) - writel(HIWORD_UPDATE(ROCKCHIP_MMC_INIT_STATE_RESET, - ROCKCHIP_MMC_INIT_STATE_RESET, - mmc_clock->shift), mmc_clock->reg); - clk = clk_register(NULL, &mmc_clock->hw); if (IS_ERR(clk)) kfree(mmc_clock); -- cgit v1.2.3 From 3183c0d519ff83af2926382c11716496f01d34bf Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Thu, 26 May 2016 21:49:08 +0800 Subject: clk: rockchip: fix cpuclk registration error handling It maybe due to a copy-paste error the error handing should be cclk not clk when checking if the cpuclk registration succeeded. Reported-by: Lin Huang Signed-off-by: Xing Zheng Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-cpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-cpu.c b/drivers/clk/rockchip/clk-cpu.c index 4bb130cd0062..05b3d73bfefa 100644 --- a/drivers/clk/rockchip/clk-cpu.c +++ b/drivers/clk/rockchip/clk-cpu.c @@ -321,9 +321,9 @@ struct clk *rockchip_clk_register_cpuclk(const char *name, } cclk = clk_register(NULL, &cpuclk->hw); - if (IS_ERR(clk)) { + if (IS_ERR(cclk)) { pr_err("%s: could not register cpuclk %s\n", __func__, name); - ret = PTR_ERR(clk); + ret = PTR_ERR(cclk); goto free_rate_table; } -- cgit v1.2.3 From 06061dc63bff8d609bc8d64f5d3ef59d0a673b25 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 11 May 2016 14:49:53 +0200 Subject: phy: exynos-mipi-video: avoid uninitialized variable use A rework of the exynos-mipi-video driver caused a warning about the new __set_phy_state function potentially accessing a variable before its initialization: drivers/phy/phy-exynos-mipi-video.c: In function '__set_phy_state': drivers/phy/phy-exynos-mipi-video.c:238:13: error: 'val' may be used uninitialized in this function [-Werror=maybe-uninitialized] return val & data->resetn_val; ~~~~^~~~~~~~~~~~~~~~~~ drivers/phy/phy-exynos-mipi-video.c:235:6: note: 'val' was declared here u32 val; The failure scenario here is the offset passed into a the stub regmap_read() function that does not modify its output, however regmap_read() can also fail for other reasons, so adding error handling (in this case, returning zero from is_running) seems the best solution. Note that this warning showed up with the ARM s5pv210_defconfig, indicating that we most likely want to either enable CONFIG_REGMAP in that defconfig as well, or disable the phy-exynos-mipi-video driver. Signed-off-by: Arnd Bergmann Reviewed-by: Krzysztof Kozlowski Fixes: 97a3042f7616 ("phy: exynos-mipi-video: Rewrite handling of phy registers") Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-exynos-mipi-video.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c index cc093ebfda94..8b851f718123 100644 --- a/drivers/phy/phy-exynos-mipi-video.c +++ b/drivers/phy/phy-exynos-mipi-video.c @@ -233,8 +233,12 @@ static inline int __is_running(const struct exynos_mipi_phy_desc *data, struct exynos_mipi_video_phy *state) { u32 val; + int ret; + + ret = regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val); + if (ret) + return 0; - regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val); return val & data->resetn_val; } -- cgit v1.2.3 From f1bddbb3de60872acc2446eee97dbeb0a6d57acb Mon Sep 17 00:00:00 2001 From: Krzysztof Opasiak Date: Thu, 5 May 2016 10:46:05 +0200 Subject: usb: gadget: Fix binding to UDC via configfs interface By default user could store only valid UDC name in configfs UDC attr by doing: echo $UDC_NAME > UDC Commit (855ed04 "usb: gadget: udc-core: independent registration of gadgets and gadget drivers") broke this behavior and allowed to store any arbitrary string in UDC file and udc core was waiting for such controller to appear. echo "any arbitrary string here" > UDC This commit fix this by adding a flag which prevents configfs gadget from being added to list of pending drivers if UDC with given name has not been found. Signed-off-by: Krzysztof Opasiak Signed-off-by: Felipe Balbi --- drivers/usb/gadget/configfs.c | 1 + drivers/usb/gadget/udc/udc-core.c | 12 ++++++++---- include/linux/usb/gadget.h | 3 +++ 3 files changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index b6f60ca8a035..70cf3477f951 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -1401,6 +1401,7 @@ static const struct usb_gadget_driver configfs_driver_template = { .owner = THIS_MODULE, .name = "configfs-gadget", }, + .match_existing_only = 1, }; static struct config_group *gadgets_make( diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c index 6e8300d6a737..e1b2dcebdc2e 100644 --- a/drivers/usb/gadget/udc/udc-core.c +++ b/drivers/usb/gadget/udc/udc-core.c @@ -603,11 +603,15 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver) } } - list_add_tail(&driver->pending, &gadget_driver_pending_list); - pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n", - driver->function); + if (!driver->match_existing_only) { + list_add_tail(&driver->pending, &gadget_driver_pending_list); + pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n", + driver->function); + ret = 0; + } + mutex_unlock(&udc_lock); - return 0; + return ret; found: ret = udc_bind_to_driver(udc, driver); mutex_unlock(&udc_lock); diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 457651bf45b0..fefe8b06a63d 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -1034,6 +1034,8 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget) * @udc_name: A name of UDC this driver should be bound to. If udc_name is NULL, * this driver will be bound to any available UDC. * @pending: UDC core private data used for deferred probe of this driver. + * @match_existing_only: If udc is not found, return an error and don't add this + * gadget driver to list of pending driver * * Devices are disabled till a gadget driver successfully bind()s, which * means the driver will handle setup() requests needed to enumerate (and @@ -1097,6 +1099,7 @@ struct usb_gadget_driver { char *udc_name; struct list_head pending; + unsigned match_existing_only:1; }; -- cgit v1.2.3 From 4879efb34f7d49235fac334d76d9c6a77a021413 Mon Sep 17 00:00:00 2001 From: "Steinar H. Gunderson" Date: Tue, 24 May 2016 20:13:15 +0200 Subject: usb: dwc3: exynos: Fix deferred probing storm. dwc3-exynos has two problems during init if the regulators are slow to come up (for instance if the I2C bus driver is not on the initramfs) and return probe deferral. First, every time this happens, the driver leaks the USB phys created; they need to be deallocated on error. Second, since the phy devices are created before the regulators fail, this means that there's a new device to re-trigger deferred probing, which causes it to essentially go into a busy loop of re-probing the device until the regulators come up. Move the phy creation to after the regulators have succeeded, and also fix cleanup on failure. On my ODROID XU4 system (with Debian's initramfs which doesn't contain the I2C driver), this reduces the number of probe attempts (for each of the two controllers) from more than 2000 to eight. Signed-off-by: Steinar H. Gunderson Reviewed-by: Krzysztof Kozlowski Reviewed-by: Vivek Gautam Fixes: d720f057fda4 ("usb: dwc3: exynos: add nop transceiver support") Cc: Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-exynos.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index dd5cb5577dca..2f1fb7e7aa54 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -128,12 +128,6 @@ static int dwc3_exynos_probe(struct platform_device *pdev) platform_set_drvdata(pdev, exynos); - ret = dwc3_exynos_register_phys(exynos); - if (ret) { - dev_err(dev, "couldn't register PHYs\n"); - return ret; - } - exynos->dev = dev; exynos->clk = devm_clk_get(dev, "usbdrd30"); @@ -183,20 +177,29 @@ static int dwc3_exynos_probe(struct platform_device *pdev) goto err3; } + ret = dwc3_exynos_register_phys(exynos); + if (ret) { + dev_err(dev, "couldn't register PHYs\n"); + goto err4; + } + if (node) { ret = of_platform_populate(node, NULL, NULL, dev); if (ret) { dev_err(dev, "failed to add dwc3 core\n"); - goto err4; + goto err5; } } else { dev_err(dev, "no device node, failed to add dwc3 core\n"); ret = -ENODEV; - goto err4; + goto err5; } return 0; +err5: + platform_device_unregister(exynos->usb2_phy); + platform_device_unregister(exynos->usb3_phy); err4: regulator_disable(exynos->vdd10); err3: -- cgit v1.2.3 From 0015f9156092d07b3ec06d37d014328419d5832e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 28 May 2016 07:48:10 +0300 Subject: usb: f_fs: off by one bug in _ffs_func_bind() This loop is supposed to set all the .num[] values to -1 but it's off by one so it skips the first element and sets one element past the end of the array. I've cleaned up the loop a little as well. Fixes: ddf8abd25994 ('USB: f_fs: the FunctionFS driver') Acked-by: Michal Nazarewicz Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_fs.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 73515d54e1cc..d26eb64e59b6 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -2729,6 +2729,7 @@ static int _ffs_func_bind(struct usb_configuration *c, func->ffs->ss_descs_count; int fs_len, hs_len, ss_len, ret, i; + struct ffs_ep *eps_ptr; /* Make it a single chunk, less management later on */ vla_group(d); @@ -2777,12 +2778,9 @@ static int _ffs_func_bind(struct usb_configuration *c, ffs->raw_descs_length); memset(vla_ptr(vlabuf, d, inums), 0xff, d_inums__sz); - for (ret = ffs->eps_count; ret; --ret) { - struct ffs_ep *ptr; - - ptr = vla_ptr(vlabuf, d, eps); - ptr[ret].num = -1; - } + eps_ptr = vla_ptr(vlabuf, d, eps); + for (i = 0; i < ffs->eps_count; i++) + eps_ptr[i].num = -1; /* Save pointers * d_eps == vlabuf, func->eps used to kfree vlabuf later -- cgit v1.2.3 From d246dcb2331c5783743720e6510892eb1d2801d9 Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Thu, 26 May 2016 11:43:45 -0500 Subject: usb: gadget: fix spinlock dead lock in gadgetfs [ 40.467381] ============================================= [ 40.473013] [ INFO: possible recursive locking detected ] [ 40.478651] 4.6.0-08691-g7f3db9a #37 Not tainted [ 40.483466] --------------------------------------------- [ 40.489098] usb/733 is trying to acquire lock: [ 40.493734] (&(&dev->lock)->rlock){-.....}, at: [] ep0_complete+0x18/0xdc [gadgetfs] [ 40.502882] [ 40.502882] but task is already holding lock: [ 40.508967] (&(&dev->lock)->rlock){-.....}, at: [] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.517811] [ 40.517811] other info that might help us debug this: [ 40.524623] Possible unsafe locking scenario: [ 40.524623] [ 40.530798] CPU0 [ 40.533346] ---- [ 40.535894] lock(&(&dev->lock)->rlock); [ 40.540088] lock(&(&dev->lock)->rlock); [ 40.544284] [ 40.544284] *** DEADLOCK *** [ 40.544284] [ 40.550461] May be due to missing lock nesting notation [ 40.550461] [ 40.557544] 2 locks held by usb/733: [ 40.561271] #0: (&f->f_pos_lock){+.+.+.}, at: [] __fdget_pos+0x40/0x48 [ 40.569219] #1: (&(&dev->lock)->rlock){-.....}, at: [] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.578523] [ 40.578523] stack backtrace: [ 40.583075] CPU: 0 PID: 733 Comm: usb Not tainted 4.6.0-08691-g7f3db9a #37 [ 40.590246] Hardware name: Generic AM33XX (Flattened Device Tree) [ 40.596625] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 40.604718] [] (show_stack) from [] (dump_stack+0xb0/0xe4) [ 40.612267] [] (dump_stack) from [] (__lock_acquire+0xf68/0x1994) [ 40.620440] [] (__lock_acquire) from [] (lock_acquire+0xd8/0x238) [ 40.628621] [] (lock_acquire) from [] (_raw_spin_lock_irqsave+0x38/0x4c) [ 40.637440] [] (_raw_spin_lock_irqsave) from [] (ep0_complete+0x18/0xdc [gadgetfs]) [ 40.647339] [] (ep0_complete [gadgetfs]) from [] (musb_g_giveback+0x118/0x1b0 [musb_hdrc]) [ 40.657842] [] (musb_g_giveback [musb_hdrc]) from [] (musb_g_ep0_queue+0x16c/0x188 [musb_hdrc]) [ 40.668772] [] (musb_g_ep0_queue [musb_hdrc]) from [] (ep0_read+0x544/0x5e0 [gadgetfs]) [ 40.678963] [] (ep0_read [gadgetfs]) from [] (__vfs_read+0x20/0x110) [ 40.687414] [] (__vfs_read) from [] (vfs_read+0x88/0x114) [ 40.694864] [] (vfs_read) from [] (SyS_read+0x44/0x9c) [ 40.702051] [] (SyS_read) from [] (ret_fast_syscall+0x0/0x1c) This is caused by the spinlock bug in ep0_read(). Fix the two other deadlock sources in gadgetfs_setup() too. Cc: # v3.16+ Signed-off-by: Bin Liu Signed-off-by: Felipe Balbi --- drivers/usb/gadget/legacy/inode.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index e64479f882a5..aa3707bdebb4 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -938,8 +938,11 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) struct usb_ep *ep = dev->gadget->ep0; struct usb_request *req = dev->req; - if ((retval = setup_req (ep, req, 0)) == 0) - retval = usb_ep_queue (ep, req, GFP_ATOMIC); + if ((retval = setup_req (ep, req, 0)) == 0) { + spin_unlock_irq (&dev->lock); + retval = usb_ep_queue (ep, req, GFP_KERNEL); + spin_lock_irq (&dev->lock); + } dev->state = STATE_DEV_CONNECTED; /* assume that was SET_CONFIGURATION */ @@ -1457,8 +1460,11 @@ delegate: w_length); if (value < 0) break; + + spin_unlock (&dev->lock); value = usb_ep_queue (gadget->ep0, dev->req, - GFP_ATOMIC); + GFP_KERNEL); + spin_lock (&dev->lock); if (value < 0) { clean_req (gadget->ep0, dev->req); break; @@ -1481,11 +1487,14 @@ delegate: if (value >= 0 && dev->state != STATE_DEV_SETUP) { req->length = value; req->zero = value < w_length; - value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); + + spin_unlock (&dev->lock); + value = usb_ep_queue (gadget->ep0, req, GFP_KERNEL); if (value < 0) { DBG (dev, "ep_queue --> %d\n", value); req->status = 0; } + return value; } /* device stalls when value < 0 */ -- cgit v1.2.3 From 51da43b555ba19e0230ff5a5acc58eb0fffb6026 Mon Sep 17 00:00:00 2001 From: Vahram Aharonyan Date: Mon, 23 May 2016 22:41:57 -0700 Subject: usb: dwc2: gadget: Do not halt endpoint if active The gadget API function usb_ep_set_halt() expects the gadget to return -EAGAIN if the ep is active. Add support for this behavior. Otherwise this may break mass storage protocol if a STALL is attempted on the endpoint. Signed-off-by: Vahram Aharonyan Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 4c5e3005e1dc..e4e2a9031dee 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -1018,7 +1018,7 @@ static int dwc2_hsotg_process_req_status(struct dwc2_hsotg *hsotg, return 1; } -static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value); +static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now); /** * get_ep_head - return the first request on the endpoint @@ -1094,7 +1094,7 @@ static int dwc2_hsotg_process_req_feature(struct dwc2_hsotg *hsotg, case USB_ENDPOINT_HALT: halted = ep->halted; - dwc2_hsotg_ep_sethalt(&ep->ep, set); + dwc2_hsotg_ep_sethalt(&ep->ep, set, true); ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0); if (ret) { @@ -2948,8 +2948,13 @@ static int dwc2_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) * dwc2_hsotg_ep_sethalt - set halt on a given endpoint * @ep: The endpoint to set halt. * @value: Set or unset the halt. + * @now: If true, stall the endpoint now. Otherwise return -EAGAIN if + * the endpoint is busy processing requests. + * + * We need to stall the endpoint immediately if request comes from set_feature + * protocol command handler. */ -static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value) +static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now) { struct dwc2_hsotg_ep *hs_ep = our_ep(ep); struct dwc2_hsotg *hs = hs_ep->parent; @@ -2969,6 +2974,12 @@ static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value) return 0; } + if (!now && value && !list_empty(&hs_ep->queue)) { + dev_dbg(hs->dev, "%s request is pending, cannot halt\n", + ep->name); + return -EAGAIN; + } + if (hs_ep->dir_in) { epreg = DIEPCTL(index); epctl = dwc2_readl(hs->regs + epreg); @@ -3020,7 +3031,7 @@ static int dwc2_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value) int ret = 0; spin_lock_irqsave(&hs->lock, flags); - ret = dwc2_hsotg_ep_sethalt(ep, value); + ret = dwc2_hsotg_ep_sethalt(ep, value, false); spin_unlock_irqrestore(&hs->lock, flags); return ret; -- cgit v1.2.3 From 15186f1011b088432a10f435aa6e2df5ab177503 Mon Sep 17 00:00:00 2001 From: Vahram Aharonyan Date: Mon, 23 May 2016 22:41:59 -0700 Subject: usb: dwc2: gadget: Do not halt isochronous endpoints Add a check in dwc2_hsotg_ep_sethalt() so that it does not halt isochronous endpoints. Signed-off-by: Vahram Aharonyan Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index e4e2a9031dee..26cf09d0fe3c 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -2974,6 +2974,11 @@ static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now) return 0; } + if (hs_ep->isochronous) { + dev_err(hs->dev, "%s is Isochronous Endpoint\n", ep->name); + return -EINVAL; + } + if (!now && value && !list_empty(&hs_ep->queue)) { dev_dbg(hs->dev, "%s request is pending, cannot halt\n", ep->name); -- cgit v1.2.3 From e5a89162161d498170e7e39e6cfd2f71458c2b00 Mon Sep 17 00:00:00 2001 From: Krzysztof Opasiak Date: Sun, 22 May 2016 11:08:13 +0200 Subject: usb: gadget: printer: Drop unused device qualifier descriptor This descriptor is never used. Currently device qualifier descriptor is generated by compossite code, so no need to keep it in function file. Signed-off-by: Krzysztof Opasiak Signed-off-by: Krzysztof Opasiak Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_printer.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c index c45104e3a64b..64706a789580 100644 --- a/drivers/usb/gadget/function/f_printer.c +++ b/drivers/usb/gadget/function/f_printer.c @@ -161,14 +161,6 @@ static struct usb_endpoint_descriptor hs_ep_out_desc = { .wMaxPacketSize = cpu_to_le16(512) }; -static struct usb_qualifier_descriptor dev_qualifier = { - .bLength = sizeof(dev_qualifier), - .bDescriptorType = USB_DT_DEVICE_QUALIFIER, - .bcdUSB = cpu_to_le16(0x0200), - .bDeviceClass = USB_CLASS_PRINTER, - .bNumConfigurations = 1 -}; - static struct usb_descriptor_header *hs_printer_function[] = { (struct usb_descriptor_header *) &intf_desc, (struct usb_descriptor_header *) &hs_ep_in_desc, -- cgit v1.2.3 From d4529f9be1d72919f75f76f31773c4e98d03ce6b Mon Sep 17 00:00:00 2001 From: Krzysztof Opasiak Date: Sun, 22 May 2016 11:08:14 +0200 Subject: usb: gadget: uac2: Drop unused device qualifier descriptor This descriptor is never used. Currently device qualifier descriptor is generated by compossite code so no need to keep it in function file. Signed-off-by: Krzysztof Opasiak Signed-off-by: Krzysztof Opasiak Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_uac2.c | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index 186d4b162524..1c81dd3b0cd4 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -598,18 +598,6 @@ static struct usb_gadget_strings *fn_strings[] = { NULL, }; -static struct usb_qualifier_descriptor devqual_desc = { - .bLength = sizeof devqual_desc, - .bDescriptorType = USB_DT_DEVICE_QUALIFIER, - - .bcdUSB = cpu_to_le16(0x200), - .bDeviceClass = USB_CLASS_MISC, - .bDeviceSubClass = 0x02, - .bDeviceProtocol = 0x01, - .bNumConfigurations = 1, - .bRESERVED = 0, -}; - static struct usb_interface_assoc_descriptor iad_desc = { .bLength = sizeof iad_desc, .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION, -- cgit v1.2.3 From cc50dc28da9109d585416595fc23ebb2171f3b2f Mon Sep 17 00:00:00 2001 From: Krzysztof Opasiak Date: Sun, 22 May 2016 11:08:15 +0200 Subject: usb: gadget: storage-common: Fix old comment about qualifier descriptor Device qualifier descriptor is now generated by composite.c code. So let's fix this old comment by removing parts which are no longer valid. Signed-off-by: Krzysztof Opasiak Signed-off-by: Krzysztof Opasiak Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/storage_common.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c index d62683017cf3..990df221c629 100644 --- a/drivers/usb/gadget/function/storage_common.c +++ b/drivers/usb/gadget/function/storage_common.c @@ -83,9 +83,7 @@ EXPORT_SYMBOL_GPL(fsg_fs_function); * USB 2.0 devices need to expose both high speed and full speed * descriptors, unless they only run at full speed. * - * That means alternate endpoint descriptors (bigger packets) - * and a "device qualifier" ... plus more construction options - * for the configuration descriptor. + * That means alternate endpoint descriptors (bigger packets). */ struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, -- cgit v1.2.3 From 53642399aa71b7c3b15d0305dc54738c4222bb1e Mon Sep 17 00:00:00 2001 From: Jim Lin Date: Fri, 20 May 2016 18:13:19 +0800 Subject: usb: gadget: f_fs: Fix wrong check on reserved1 of OS_DESC_EXT_COMPAT Current __ffs_data_do_os_desc() of f_fs.c will check reserved1 field of OS_DESC_EXT_COMPAT and return -EINVAL if it's 1. But MS OS 1.0 Descriptors http://msdn.microsoft.com/en-us/library/windows/hardware/gg463179.aspx defines that field to be 1. Signed-off-by: Jim Lin Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index d26eb64e59b6..9ac6e868946d 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -2051,7 +2051,7 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type, if (len < sizeof(*d) || d->bFirstInterfaceNumber >= ffs->interfaces_count || - d->Reserved1) + !d->Reserved1) return -EINVAL; for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i) if (d->Reserved2[i]) -- cgit v1.2.3 From 23e3439296a55affce3ef0ab78f1c2e03aec8767 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 13 May 2016 15:52:27 +0200 Subject: usb: dwc2: fix regression on big-endian PowerPC/ARM systems A patch that went into Linux-4.4 to fix big-endian mode on a Lantiq MIPS system unfortunately broke big-endian operation on PowerPC APM82181 as reported by Christian Lamparter, and likely other systems. It actually introduced multiple issues: - it broke big-endian ARM kernels: any machine that was working correctly with a little-endian kernel is no longer using byteswaps on big-endian kernels, which clearly breaks them. - On PowerPC the same thing must be true: if it was working before, using big-endian kernels is now broken. Unlike ARM, 32-bit PowerPC usually uses big-endian kernels, so they are likely all broken. - The barrier for dwc2_writel is on the wrong side of the __raw_writel(), so the MMIO no longer synchronizes with DMA operations. - On architectures that require specific CPU instructions for MMIO access, using the __raw_ variant may turn this into a pointer dereference that does not have the same effect as the readl/writel. This patch is a simple revert for all architectures other than MIPS, in the hope that we can more easily backport it to fix the regression on PowerPC and ARM systems without breaking the Lantiq system again. We should follow this up with a more elaborate change to add runtime detection of endianness, to make sure it also works on all other combinations of architectures and implementations of the usb-dwc2 device. That patch however will be fairly large and not appropriate for backports to stable kernels. Felipe suggested a different approach, using an endianness switching register to always put the device into LE mode, but unfortunately the dwc2 hardware does not provide a generic way to do that. Also, I see no practical way of addressing the problem more generally by patching architecture specific code on MIPS. Fixes: 95c8bc360944 ("usb: dwc2: Use platform endianness when accessing registers") Acked-by: John Youn Tested-by: Christian Lamparter Signed-off-by: Arnd Bergmann Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/core.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 3c58d633ce80..dec0b21fc626 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -64,6 +64,17 @@ DWC2_TRACE_SCHEDULER_VB(pr_fmt("%s: SCH: " fmt), \ dev_name(hsotg->dev), ##__VA_ARGS__) +#ifdef CONFIG_MIPS +/* + * There are some MIPS machines that can run in either big-endian + * or little-endian mode and that use the dwc2 register without + * a byteswap in both ways. + * Unlike other architectures, MIPS apparently does not require a + * barrier before the __raw_writel() to synchronize with DMA but does + * require the barrier after the __raw_writel() to serialize a set of + * writes. This set of operations was added specifically for MIPS and + * should only be used there. + */ static inline u32 dwc2_readl(const void __iomem *addr) { u32 value = __raw_readl(addr); @@ -90,6 +101,22 @@ static inline void dwc2_writel(u32 value, void __iomem *addr) pr_info("INFO:: wrote %08x to %p\n", value, addr); #endif } +#else +/* Normal architectures just use readl/write */ +static inline u32 dwc2_readl(const void __iomem *addr) +{ + return readl(addr); +} + +static inline void dwc2_writel(u32 value, void __iomem *addr) +{ + writel(value, addr); + +#ifdef DWC2_LOG_WRITES + pr_info("info:: wrote %08x to %p\n", value, addr); +#endif +} +#endif /* Maximum number of Endpoints/HostChannels */ #define MAX_EPS_CHANNELS 16 -- cgit v1.2.3 From ffeee83aa0461992e8a99a59db2df31933e60362 Mon Sep 17 00:00:00 2001 From: Heinrich Schuchardt Date: Sun, 8 May 2016 23:20:59 +0200 Subject: usb: gadget: avoid exposing kernel stack Function in_rq_cur copies random bytes from the stack. Zero the memory instead. Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by: Heinrich Schuchardt Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_uac2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index 1c81dd3b0cd4..cd214ec8a601 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -1280,6 +1280,7 @@ in_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr) if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) { struct cntrl_cur_lay3 c; + memset(&c, 0, sizeof(struct cntrl_cur_lay3)); if (entity_id == USB_IN_CLK_ID) c.dCUR = p_srate; -- cgit v1.2.3 From e877b729c649c2850f61f2ae37296ae701f9ad63 Mon Sep 17 00:00:00 2001 From: Heinrich Schuchardt Date: Sun, 8 May 2016 22:50:12 +0200 Subject: usb: gadget: f_tcm: out of bound access in usbg_drop_tpg Commit dc8c46a5ae77 ("usb: gadget: f_tcm: convert to new function interface with backward compatibility") introduced a possible out of bounds memory access: If tpg is not found in function usbg_drop_tpg, tpg_instances[TPG_INSTANCES] is accessed. Fixes: dc8c46a5ae77 ("usb: gadget: f_tcm: convert to new function interface with backward compatibility") Signed-off-by: Heinrich Schuchardt Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_tcm.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c index 35fe3c80cfc0..197f73386fac 100644 --- a/drivers/usb/gadget/function/f_tcm.c +++ b/drivers/usb/gadget/function/f_tcm.c @@ -1445,16 +1445,18 @@ static void usbg_drop_tpg(struct se_portal_group *se_tpg) for (i = 0; i < TPG_INSTANCES; ++i) if (tpg_instances[i].tpg == tpg) break; - if (i < TPG_INSTANCES) + if (i < TPG_INSTANCES) { tpg_instances[i].tpg = NULL; - opts = container_of(tpg_instances[i].func_inst, - struct f_tcm_opts, func_inst); - mutex_lock(&opts->dep_lock); - if (opts->has_dep) - module_put(opts->dependent); - else - configfs_undepend_item_unlocked(&opts->func_inst.group.cg_item); - mutex_unlock(&opts->dep_lock); + opts = container_of(tpg_instances[i].func_inst, + struct f_tcm_opts, func_inst); + mutex_lock(&opts->dep_lock); + if (opts->has_dep) + module_put(opts->dependent); + else + configfs_undepend_item_unlocked( + &opts->func_inst.group.cg_item); + mutex_unlock(&opts->dep_lock); + } mutex_unlock(&tpg_instances_lock); kfree(tpg); -- cgit v1.2.3 From c6010c8b4d2c6e75853ca63c602c9af56fcbead5 Mon Sep 17 00:00:00 2001 From: Jim Lin Date: Fri, 13 May 2016 20:32:16 +0800 Subject: usb: gadget: f_fs: Fix kernel panic if use_os_string not set If c->cdev->use_os_string flag is not set, don't need to invoke ffs_do_os_descs() in _ffs_func_bind. So uninitialized ext_compat_id pointer won't be accessed by __ffs_func_bind_do_os_desc to cause kernel panic. Signed-off-by: Jim Lin Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_fs.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 9ac6e868946d..cc33d2667408 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -2849,7 +2849,7 @@ static int _ffs_func_bind(struct usb_configuration *c, goto error; func->function.os_desc_table = vla_ptr(vlabuf, d, os_desc_table); - if (c->cdev->use_os_string) + if (c->cdev->use_os_string) { for (i = 0; i < ffs->interfaces_count; ++i) { struct usb_os_desc *desc; @@ -2860,13 +2860,15 @@ static int _ffs_func_bind(struct usb_configuration *c, vla_ptr(vlabuf, d, ext_compat) + i * 16; INIT_LIST_HEAD(&desc->ext_prop); } - ret = ffs_do_os_descs(ffs->ms_os_descs_count, - vla_ptr(vlabuf, d, raw_descs) + - fs_len + hs_len + ss_len, - d_raw_descs__sz - fs_len - hs_len - ss_len, - __ffs_func_bind_do_os_desc, func); - if (unlikely(ret < 0)) - goto error; + ret = ffs_do_os_descs(ffs->ms_os_descs_count, + vla_ptr(vlabuf, d, raw_descs) + + fs_len + hs_len + ss_len, + d_raw_descs__sz - fs_len - hs_len - + ss_len, + __ffs_func_bind_do_os_desc, func); + if (unlikely(ret < 0)) + goto error; + } func->function.os_desc_n = c->cdev->use_os_string ? ffs->interfaces_count : 0; -- cgit v1.2.3 From 7e14f47a55ed67c9d8a8acea6023412f92bac936 Mon Sep 17 00:00:00 2001 From: William Wu Date: Fri, 13 May 2016 18:30:42 +0800 Subject: usb: gadget: composite: don't queue OS desc req if length is invalid In OS descriptors handling, if ctrl->bRequestType is USB_RECIP_DEVICE and w_index != 0x4 or (w_value >> 8) is true, it will not assign a valid value to req->length, but use the default value(-EOPNOTSUPP), and queue an OS desc request with the invalid req->length. It always happens on the platforms which use os_desc (for example: rk3366, rk3399), and cause kernel panic as follows (use dwc3 driver): Unable to handle kernel paging request at virtual address ffffffc0f7e00000 Internal error: Oops: 96000146 [#1] PREEMPT SMP PC is at __dma_clean_range+0x18/0x30 LR is at __swiotlb_map_page+0x50/0x64 Call trace: [] __dma_clean_range+0x18/0x30 [] usb_gadget_map_request+0x134/0x1b0 [] __dwc3_ep0_do_control_data+0x110/0x14c [] __dwc3_gadget_ep0_queue+0x198/0x1b8 [] dwc3_gadget_ep0_queue+0xc0/0xe8 [] composite_ep0_queue.constprop.14+0x34/0x98 [] composite_setup+0xf60/0x100c [] android_setup+0xd8/0x138 [] dwc3_ep0_delegate_req+0x34/0x50 [] dwc3_ep0_interrupt+0x5dc/0xb58 [] dwc3_thread_interrupt+0x15c/0xa24 With this patch, the gadget driver will not queue a request and return immediately if req->length is invalid. And the usb controller driver can handle the unsupport request correctly. Signed-off-by: William Wu Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index d67de0d22a2b..eb648485a58c 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1868,14 +1868,19 @@ unknown: } break; } - req->length = value; - req->context = cdev; - req->zero = value < w_length; - value = composite_ep0_queue(cdev, req, GFP_ATOMIC); - if (value < 0) { - DBG(cdev, "ep_queue --> %d\n", value); - req->status = 0; - composite_setup_complete(gadget->ep0, req); + + if (value >= 0) { + req->length = value; + req->context = cdev; + req->zero = value < w_length; + value = composite_ep0_queue(cdev, req, + GFP_ATOMIC); + if (value < 0) { + DBG(cdev, "ep_queue --> %d\n", value); + req->status = 0; + composite_setup_complete(gadget->ep0, + req); + } } return value; } -- cgit v1.2.3 From 27a0faafdca53bda21ed340ca8f8960696dda049 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Wed, 11 May 2016 17:33:11 +0100 Subject: usb: dwc3: st: Fix USB_DR_MODE_PERIPHERAL configuration. Set USB3_FORCE_VBUSVALID when configured for USB_DR_MODE_PERIPHERAL mode, as it is required to have a working setup. This worked on the internal driver by relying on the reset value of the syscfg register as the bits aren't explicity cleared and set like the upstream driver. Also add a comment about what setting this bit means. Signed-off-by: Peter Griffin Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-st.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index 5c0adb9c6fb2..50d6ae6f88bc 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -129,12 +129,18 @@ static int st_dwc3_drd_init(struct st_dwc3 *dwc3_data) switch (dwc3_data->dr_mode) { case USB_DR_MODE_PERIPHERAL: - val &= ~(USB3_FORCE_VBUSVALID | USB3_DELAY_VBUSVALID + val &= ~(USB3_DELAY_VBUSVALID | USB3_SEL_FORCE_OPMODE | USB3_FORCE_OPMODE(0x3) | USB3_SEL_FORCE_DPPULLDOWN2 | USB3_FORCE_DPPULLDOWN2 | USB3_SEL_FORCE_DMPULLDOWN2 | USB3_FORCE_DMPULLDOWN2); - val |= USB3_DEVICE_NOT_HOST; + /* + * USB3_PORT2_FORCE_VBUSVALID When '1' and when + * USB3_PORT2_DEVICE_NOT_HOST = 1, forces VBUSVLDEXT2 input + * of the pico PHY to 1. + */ + + val |= USB3_DEVICE_NOT_HOST | USB3_FORCE_VBUSVALID; break; case USB_DR_MODE_HOST: -- cgit v1.2.3 From 62397da50bb20a6b812c949ef465d7e69fe54bb6 Mon Sep 17 00:00:00 2001 From: Martin Willi Date: Fri, 13 May 2016 12:41:48 +0200 Subject: mac80211_hwsim: Add missing check for HWSIM_ATTR_SIGNAL A wmediumd that does not send this attribute causes a NULL pointer dereference, as the attribute is accessed even if it does not exist. The attribute was required but never checked ever since userspace frame forwarding has been introduced. The issue gets more problematic once we allow wmediumd registration from user namespaces. Cc: stable@vger.kernel.org Fixes: 7882513bacb1 ("mac80211_hwsim driver support userspace frame tx/rx") Signed-off-by: Martin Willi Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 9ed0ed1bf514..4dd5adcdd29b 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -2776,6 +2776,7 @@ static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2, if (!info->attrs[HWSIM_ATTR_ADDR_TRANSMITTER] || !info->attrs[HWSIM_ATTR_FLAGS] || !info->attrs[HWSIM_ATTR_COOKIE] || + !info->attrs[HWSIM_ATTR_SIGNAL] || !info->attrs[HWSIM_ATTR_TX_INFO]) goto out; -- cgit v1.2.3 From c714a588fc39dc8c8f70014f5691217717983fb3 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 31 May 2016 17:26:00 +0800 Subject: regulator: tps51632: Fix setting ramp delay According to the datasheet: SLEW Register(Address = 07h) b7 b6 b5 b4 b3 b2 b1 b0 48mV/us 42mV/us 36mV/us 30mV/us 24mV/us 18mV/us 12mV/us 6mV/us Current code does not set correct slew rate in some cases: e.g. Assume ramp_delay is 10000, current code sets slew register to 6mV/us. Fix the logic to set slew register. Signed-off-by: Axel Lin Acked-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/tps51632-regulator.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c index 572816e30095..c139890c1514 100644 --- a/drivers/regulator/tps51632-regulator.c +++ b/drivers/regulator/tps51632-regulator.c @@ -94,11 +94,14 @@ static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) { struct tps51632_chip *tps = rdev_get_drvdata(rdev); - int bit = ramp_delay/6000; + int bit; int ret; - if (bit) - bit--; + if (ramp_delay == 0) + bit = 0; + else + bit = DIV_ROUND_UP(ramp_delay, 6000) - 1; + ret = regmap_write(tps->regmap, TPS51632_SLEW_REGS, BIT(bit)); if (ret < 0) dev_err(tps->dev, "SLEW reg write failed, err %d\n", ret); -- cgit v1.2.3 From 3ac066e2227cb272c097f34475247fa0a6cdd2ff Mon Sep 17 00:00:00 2001 From: Jean-Jacques Hiblot Date: Tue, 31 May 2016 17:56:23 +0200 Subject: spi: spi-ti-qspi: Suspend the queue before removing the device Before disabling the pm_runtime, we must ensure that there is no transfer in progress nor will a new one be started. Otherwise the message pump will fail and in the end, the process requesting the transfer will be stuck. This behavior has been observed when transferring data from a SPI flash with dd while removing the module on a DRA7x-evm. Signed-off-by: Jean-Jacques Hiblot Signed-off-by: Mark Brown --- drivers/spi/spi-ti-qspi.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index 443f664534e1..29ea8d2f9824 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -646,6 +646,13 @@ free_master: static int ti_qspi_remove(struct platform_device *pdev) { + struct ti_qspi *qspi = platform_get_drvdata(pdev); + int rc; + + rc = spi_master_suspend(qspi->master); + if (rc) + return rc; + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); -- cgit v1.2.3 From 792293cfd516a173bbd687b4b26da0f97f97abd2 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Fri, 6 May 2016 19:26:05 +0200 Subject: drm/vc4: Fix get_vblank_counter with proper no-op for Linux 4.4+ get_vblank_counter hooked up to drm_vblank_count() which alway was non-sensical but didn't hurt in the past. Since Linux 4.4 it triggers a WARN_ON_ONCE in drm_update_vblank_count on first vblank irq disable, so fix it by hooking to drm_vblank_no_hw_counter(). Tested against Raspian kernel 4.4.8 tree on RPi 2B. Signed-off-by: Mario Kleiner Reviewed-by: Eric Anholt Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.") --- drivers/gpu/drm/vc4/vc4_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c index 3446ece21b4a..ef7de8eb2b63 100644 --- a/drivers/gpu/drm/vc4/vc4_drv.c +++ b/drivers/gpu/drm/vc4/vc4_drv.c @@ -91,7 +91,7 @@ static struct drm_driver vc4_drm_driver = { .enable_vblank = vc4_enable_vblank, .disable_vblank = vc4_disable_vblank, - .get_vblank_counter = drm_vblank_count, + .get_vblank_counter = drm_vblank_no_hw_counter, #if defined(CONFIG_DEBUG_FS) .debugfs_init = vc4_debugfs_init, -- cgit v1.2.3 From ee7c10e10b632e2319ed1d2d49d63df51a611e62 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Fri, 6 May 2016 19:26:06 +0200 Subject: drm/vc4: Fix drm_vblank_put/get imbalance in page flip path. The async page flip path was missing drm_crtc_vblank_get/put completely. The sync flip path was missing a vblank put, so async flips only reported proper pageflip completion events by chance, and vblank irq's never turned off after a first vsync'ed page flip until system reboot. Tested against Raspian kernel 4.4.8 tree on RPi 2B. Signed-off-by: Mario Kleiner Reviewed-by: Eric Anholt Fixes: b501bacc6060 ("drm/vc4: Add support for async pageflips.") --- drivers/gpu/drm/vc4/vc4_crtc.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index 904d0754ad78..e9befb6d10fd 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -506,6 +506,7 @@ static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) if (vc4_crtc->event) { drm_crtc_send_vblank_event(crtc, vc4_crtc->event); vc4_crtc->event = NULL; + drm_crtc_vblank_put(crtc); } spin_unlock_irqrestore(&dev->event_lock, flags); } @@ -556,6 +557,7 @@ vc4_async_page_flip_complete(struct vc4_seqno_cb *cb) spin_unlock_irqrestore(&dev->event_lock, flags); } + drm_crtc_vblank_put(crtc); drm_framebuffer_unreference(flip_state->fb); kfree(flip_state); @@ -598,6 +600,8 @@ static int vc4_async_page_flip(struct drm_crtc *crtc, return ret; } + WARN_ON(drm_crtc_vblank_get(crtc) != 0); + /* Immediately update the plane's legacy fb pointer, so that later * modeset prep sees the state that will be present when the semaphore * is released. -- cgit v1.2.3 From e7c31f6f25b84fed961dc0dce6248878527693ae Mon Sep 17 00:00:00 2001 From: Robert Foss Date: Tue, 3 May 2016 13:48:20 -0400 Subject: drm/vc4: Return -EBUSY if there's already a pending flip event. As per the documentation in drm_crtc.h, atomic_commit should return -EBUSY if an asynchronous update is requested and there is an earlier update pending. v2: Rebase on the s/async/nonblock/ change. Signed-off-by: Robert Foss Reviewed-by: Eric Anholt --- drivers/gpu/drm/vc4/vc4_kms.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c index cb37751bc99f..861a623bc185 100644 --- a/drivers/gpu/drm/vc4/vc4_kms.c +++ b/drivers/gpu/drm/vc4/vc4_kms.c @@ -117,10 +117,18 @@ static int vc4_atomic_commit(struct drm_device *dev, return -ENOMEM; /* Make sure that any outstanding modesets have finished. */ - ret = down_interruptible(&vc4->async_modeset); - if (ret) { - kfree(c); - return ret; + if (nonblock) { + ret = down_trylock(&vc4->async_modeset); + if (ret) { + kfree(c); + return -EBUSY; + } + } else { + ret = down_interruptible(&vc4->async_modeset); + if (ret) { + kfree(c); + return ret; + } } ret = drm_atomic_helper_prepare_planes(dev, state); -- cgit v1.2.3 From fbd83006e3e536fcb103228d2422ea63129ccb03 Mon Sep 17 00:00:00 2001 From: "Ewan D. Milne" Date: Tue, 31 May 2016 09:42:29 -0400 Subject: scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist Linux fails to boot as a guest with a QEMU CD-ROM: [ 4.439488] ata2.00: ATAPI: QEMU CD-ROM, 0.8.2, max UDMA/100 [ 4.443649] ata2.00: configured for MWDMA2 [ 4.450267] scsi 1:0:0:0: CD-ROM QEMU QEMU CD-ROM 0.8. PQ: 0 ANSI: 5 [ 4.464317] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 4.464319] ata2.00: BMDMA stat 0x5 [ 4.464339] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in [ 4.464339] Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [ 4.464341] ata2.00: status: { DRDY DRQ } [ 4.465864] ata2: soft resetting link [ 4.625971] ata2.00: configured for MWDMA2 [ 4.628290] ata2: EH complete [ 4.646670] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 4.646671] ata2.00: BMDMA stat 0x5 [ 4.646683] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in [ 4.646683] Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [ 4.646685] ata2.00: status: { DRDY DRQ } [ 4.648193] ata2: soft resetting link ... Fix this by suppressing VPD inquiry for this device. Signed-off-by: Ewan D. Milne Reported-by: Jan Stancek Tested-by: Jan Stancek Cc: Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_devinfo.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 3408578b08d6..ff41c310c900 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -230,6 +230,7 @@ static struct { {"PIONEER", "CD-ROM DRM-624X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, {"Promise", "VTrak E610f", NULL, BLIST_SPARSELUN | BLIST_NO_RSOC}, {"Promise", "", NULL, BLIST_SPARSELUN}, + {"QEMU", "QEMU CD-ROM", NULL, BLIST_SKIP_VPD_PAGES}, {"QNAP", "iSCSI Storage", NULL, BLIST_MAX_1024}, {"SYNOLOGY", "iSCSI Storage", NULL, BLIST_MAX_1024}, {"QUANTUM", "XP34301", "1071", BLIST_NOTQ}, -- cgit v1.2.3 From 50c763f8c1bac0dc00f7788a75f227276c0efd54 Mon Sep 17 00:00:00 2001 From: John Youn Date: Tue, 31 May 2016 17:49:56 -0700 Subject: usb: dwc3: Set the ClearPendIN bit on Clear Stall EP command As of core revision 2.60a the recommended programming model is to set the ClearPendIN bit when issuing a Clear Stall EP command for IN endpoints. This is to prevent an issue where some (non-compliant) hosts may not send ACK TPs for pending IN transfers due to a mishandled error condition. Synopsys STAR 9000614252. Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.h | 1 + drivers/usb/dwc3/gadget.c | 30 ++++++++++++++++++++++++------ 2 files changed, 25 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 7ddf9449a063..654050684f4f 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -402,6 +402,7 @@ #define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f) #define DWC3_DEPCMD_STATUS(x) (((x) >> 12) & 0x0F) #define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11) +#define DWC3_DEPCMD_CLEARPENDIN (1 << 11) #define DWC3_DEPCMD_CMDACT (1 << 10) #define DWC3_DEPCMD_CMDIOC (1 << 8) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 9a7d0bd15dc3..07248ff1be5c 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -347,6 +347,28 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, return ret; } +static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + struct dwc3_gadget_ep_cmd_params params; + u32 cmd = DWC3_DEPCMD_CLEARSTALL; + + /* + * As of core revision 2.60a the recommended programming model + * is to set the ClearPendIN bit when issuing a Clear Stall EP + * command for IN endpoints. This is to prevent an issue where + * some (non-compliant) hosts may not send ACK TPs for pending + * IN transfers due to a mishandled error condition. Synopsys + * STAR 9000614252. + */ + if (dep->direction && (dwc->revision >= DWC3_REVISION_260A)) + cmd |= DWC3_DEPCMD_CLEARPENDIN; + + memset(¶ms, 0, sizeof(params)); + + return dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); +} + static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep, struct dwc3_trb *trb) { @@ -1314,8 +1336,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) else dep->flags |= DWC3_EP_STALL; } else { - ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, - DWC3_DEPCMD_CLEARSTALL, ¶ms); + ret = dwc3_send_clear_stall_ep_cmd(dep); if (ret) dev_err(dwc->dev, "failed to clear STALL on %s\n", dep->name); @@ -2247,7 +2268,6 @@ static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) { struct dwc3_ep *dep; - struct dwc3_gadget_ep_cmd_params params; int ret; dep = dwc->eps[epnum]; @@ -2259,9 +2279,7 @@ static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) dep->flags &= ~DWC3_EP_STALL; - memset(¶ms, 0, sizeof(params)); - ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, - DWC3_DEPCMD_CLEARSTALL, ¶ms); + ret = dwc3_send_clear_stall_ep_cmd(dep); WARN_ON_ONCE(ret); } } -- cgit v1.2.3 From ed596a4a88bd161f868ccba078557ee7ede8a6ef Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 31 May 2016 14:48:15 +0200 Subject: HID: elo: kill not flush the work Flushing a work that reschedules itself is not a sensible operation. It needs to be killed. Failure to do so leads to a kernel panic in the timer code. CC: stable@vger.kernel.org Signed-off-by: Oliver Neukum Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-elo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-elo.c b/drivers/hid/hid-elo.c index aad8c162a825..0cd4f7216239 100644 --- a/drivers/hid/hid-elo.c +++ b/drivers/hid/hid-elo.c @@ -261,7 +261,7 @@ static void elo_remove(struct hid_device *hdev) struct elo_priv *priv = hid_get_drvdata(hdev); hid_hw_stop(hdev); - flush_workqueue(wq); + cancel_delayed_work_sync(&priv->work); kfree(priv); } -- cgit v1.2.3 From a80e803a2ae4efa5efbcfa97dcbbc48d15226cf9 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Tue, 31 May 2016 17:31:15 +0200 Subject: HID: multitouch: Add MT_QUIRK_NOT_SEEN_MEANS_UP to Surface Pro 3 The firmware found in the touch screen of an SP3 is buggy and may miss to send lift off reports for contacts. Try to work around that issue by using MT_QUIRK_NOT_SEEN_MEANS_UP. based on a patch from: Daniel Martin Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-multitouch.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index c741f5e50a66..95b7d61d9910 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -1401,6 +1401,11 @@ static const struct hid_device_id mt_devices[] = { MT_USB_DEVICE(USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_PCT) }, + /* Ntrig Panel */ + { .driver_data = MT_CLS_NSMU, + HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8, + USB_VENDOR_ID_NTRIG, 0x1b05) }, + /* PixArt optical touch screen */ { .driver_data = MT_CLS_INRANGE_CONTACTNUMBER, MT_USB_DEVICE(USB_VENDOR_ID_PIXART, -- cgit v1.2.3 From f840ab18bdf2e415dac21d09fbbbd2873111bd48 Mon Sep 17 00:00:00 2001 From: Lukasz Luba Date: Tue, 31 May 2016 11:32:02 +0100 Subject: thermal: cpu_cooling: fix improper order during initialization The freq_table array is not populated before calling thermal_of_cooling_register. The code which populates the freq table was introduced in commit f6859014. This should be done before registering new thermal cooling device. The log shows effects of this wrong decision. [ 2.172614] cpu cpu1: Failed to get voltage for frequency 1984518656000: -34 [ 2.220863] cpu cpu0: Failed to get voltage for frequency 1984524416000: -34 Cc: # 3.19+ Fixes: f6859014c7e7 ("thermal: cpu_cooling: Store frequencies in descending order") Signed-off-by: Lukasz Luba Acked-by: Javi Merino Acked-by: Viresh Kumar Signed-off-by: Zhang Rui --- drivers/thermal/cpu_cooling.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 6ceac4f2d4b2..5b4b47ed948b 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -857,14 +857,6 @@ __cpufreq_cooling_register(struct device_node *np, goto free_power_table; } - snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d", - cpufreq_dev->id); - - cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev, - &cpufreq_cooling_ops); - if (IS_ERR(cool_dev)) - goto remove_idr; - /* Fill freq-table in descending order of frequencies */ for (i = 0, freq = -1; i <= cpufreq_dev->max_level; i++) { freq = find_next_max(table, freq); @@ -877,6 +869,14 @@ __cpufreq_cooling_register(struct device_node *np, pr_debug("%s: freq:%u KHz\n", __func__, freq); } + snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d", + cpufreq_dev->id); + + cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev, + &cpufreq_cooling_ops); + if (IS_ERR(cool_dev)) + goto remove_idr; + cpufreq_dev->clipped_freq = cpufreq_dev->freq_table[0]; cpufreq_dev->cool_dev = cool_dev; -- cgit v1.2.3 From 540c26087bfbad6ea72758b76b16ae6282a73fea Mon Sep 17 00:00:00 2001 From: Cameron Gutman Date: Wed, 1 Jun 2016 11:32:51 -0700 Subject: Input: xpad - fix rumble on Xbox One controllers with 2015 firmware Xbox One controllers that shipped with or were upgraded to the 2015 firmware discard the current rumble packets we send. This patch changes the Xbox One rumble packet to a form that both the newer and older firmware will accept. It is based on changes made to support newer Xbox One controllers in the SteamOS brewmaster-4.1 kernel branch. Signed-off-by: Cameron Gutman Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 804dbcc37d3f..923c57236c51 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -1031,17 +1031,17 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect case XTYPE_XBOXONE: packet->data[0] = 0x09; /* activate rumble */ - packet->data[1] = 0x08; + packet->data[1] = 0x00; packet->data[2] = xpad->odata_serial++; - packet->data[3] = 0x08; /* continuous effect */ - packet->data[4] = 0x00; /* simple rumble mode */ - packet->data[5] = 0x03; /* L and R actuator only */ - packet->data[6] = 0x00; /* TODO: LT actuator */ - packet->data[7] = 0x00; /* TODO: RT actuator */ + packet->data[3] = 0x09; + packet->data[4] = 0x00; + packet->data[5] = 0x0F; + packet->data[6] = 0x00; + packet->data[7] = 0x00; packet->data[8] = strong / 512; /* left actuator */ packet->data[9] = weak / 512; /* right actuator */ - packet->data[10] = 0x80; /* length of pulse */ - packet->data[11] = 0x00; /* stop period of pulse */ + packet->data[10] = 0xFF; + packet->data[11] = 0x00; packet->data[12] = 0x00; packet->len = 13; packet->pending = true; -- cgit v1.2.3 From 3c7f4f54578b983c964eb992229a7dd153ce5ee0 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 1 Jun 2016 14:52:54 -0700 Subject: clk: microchip: Remove CLK_IS_ROOT This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Cc: Purna Chandra Mandal Cc: Ralf Baechle Cc: Signed-off-by: Stephen Boyd --- drivers/clk/microchip/clk-pic32mzda.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/microchip/clk-pic32mzda.c b/drivers/clk/microchip/clk-pic32mzda.c index 020a29acc5b0..51f54380474b 100644 --- a/drivers/clk/microchip/clk-pic32mzda.c +++ b/drivers/clk/microchip/clk-pic32mzda.c @@ -180,15 +180,15 @@ static int pic32mzda_clk_probe(struct platform_device *pdev) /* register fixed rate clocks */ clks[POSCCLK] = clk_register_fixed_rate(&pdev->dev, "posc_clk", NULL, - CLK_IS_ROOT, 24000000); + 0, 24000000); clks[FRCCLK] = clk_register_fixed_rate(&pdev->dev, "frc_clk", NULL, - CLK_IS_ROOT, 8000000); + 0, 8000000); clks[BFRCCLK] = clk_register_fixed_rate(&pdev->dev, "bfrc_clk", NULL, - CLK_IS_ROOT, 8000000); + 0, 8000000); clks[LPRCCLK] = clk_register_fixed_rate(&pdev->dev, "lprc_clk", NULL, - CLK_IS_ROOT, 32000); + 0, 32000); clks[UPLLCLK] = clk_register_fixed_rate(&pdev->dev, "usbphy_clk", NULL, - CLK_IS_ROOT, 24000000); + 0, 24000000); /* fixed rate (optional) clock */ if (of_find_property(np, "microchip,pic32mzda-sosc", NULL)) { pr_info("pic32-clk: dt requests SOSC.\n"); -- cgit v1.2.3 From 27a41a83ec54d0edfcaf079310244e7f013a7701 Mon Sep 17 00:00:00 2001 From: Gabriel Krisman Bertazi Date: Wed, 1 Jun 2016 18:09:07 +0300 Subject: xhci: Cleanup only when releasing primary hcd Under stress occasions some TI devices might not return early when reading the status register during the quirk invocation of xhci_irq made by usb_hcd_pci_remove. This means that instead of returning, we end up handling this interruption in the middle of a shutdown. Since xhci->event_ring has already been freed in xhci_mem_cleanup, we end up accessing freed memory, causing the Oops below. commit 8c24d6d7b09d ("usb: xhci: stop everything on the first call to xhci_stop") is the one that changed the instant in which we clean up the event queue when stopping a device. Before, we didn't call xhci_mem_cleanup at the first time xhci_stop is executed (for the shared HCD), instead, we only did it after the invocation for the primary HCD, much later at the removal path. The code flow for this oops looks like this: xhci_pci_remove() usb_remove_hcd(xhci->shared) xhci_stop(xhci->shared) xhci_halt() xhci_mem_cleanup(xhci); // Free the event_queue usb_hcd_pci_remove(primary) xhci_irq() // Access the event_queue if STS_EINT is set. Crash. xhci_stop() xhci_halt() // return early The fix modifies xhci_stop to only cleanup the xhci data when releasing the primary HCD. This way, we still have the event_queue configured when invoking xhci_irq. We still halt the device on the first call to xhci_stop, though. I could reproduce this issue several times on the mainline kernel by doing a bind-unbind stress test with a specific storage gadget attached. I also ran the same test over-night with my patch applied and didn't observe the issue anymore. [ 113.334124] Unable to handle kernel paging request for data at address 0x00000028 [ 113.335514] Faulting instruction address: 0xd00000000d4f767c [ 113.336839] Oops: Kernel access of bad area, sig: 11 [#1] [ 113.338214] SMP NR_CPUS=1024 NUMA PowerNV [c000000efe47ba90] c000000000720850 usb_hcd_irq+0x50/0x80 [c000000efe47bac0] c00000000073d328 usb_hcd_pci_remove+0x68/0x1f0 [c000000efe47bb00] d00000000daf0128 xhci_pci_remove+0x78/0xb0 [xhci_pci] [c000000efe47bb30] c00000000055cf70 pci_device_remove+0x70/0x110 [c000000efe47bb70] c00000000061c6bc __device_release_driver+0xbc/0x190 [c000000efe47bba0] c00000000061c7d0 device_release_driver+0x40/0x70 [c000000efe47bbd0] c000000000619510 unbind_store+0x120/0x150 [c000000efe47bc20] c0000000006183c4 drv_attr_store+0x64/0xa0 [c000000efe47bc60] c00000000039f1d0 sysfs_kf_write+0x80/0xb0 [c000000efe47bca0] c00000000039e14c kernfs_fop_write+0x18c/0x1f0 [c000000efe47bcf0] c0000000002e962c __vfs_write+0x6c/0x190 [c000000efe47bd90] c0000000002eab40 vfs_write+0xc0/0x200 [c000000efe47bde0] c0000000002ec85c SyS_write+0x6c/0x110 [c000000efe47be30] c000000000009260 system_call+0x38/0x108 Signed-off-by: Gabriel Krisman Bertazi Cc: Roger Quadros Cc: joel@jms.id.au Cc: stable@vger.kernel.org Reviewed-by: Roger Quadros Cc: #v4.3+ Tested-by: Joel Stanley Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 3 ++- drivers/usb/host/xhci.c | 27 +++++++++++++++------------ 2 files changed, 17 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 52deae4b7eac..1287339f11bb 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2721,7 +2721,8 @@ hw_died: writel(irq_pending, &xhci->ir_set->irq_pending); } - if (xhci->xhc_state & XHCI_STATE_DYING) { + if (xhci->xhc_state & XHCI_STATE_DYING || + xhci->xhc_state & XHCI_STATE_HALTED) { xhci_dbg(xhci, "xHCI dying, ignoring interrupt. " "Shouldn't IRQs be disabled?\n"); /* Clear the event handler busy flag (RW1C); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index fa7e1ef36cd9..fe95602a8ea8 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -685,20 +685,23 @@ void xhci_stop(struct usb_hcd *hcd) u32 temp; struct xhci_hcd *xhci = hcd_to_xhci(hcd); - if (xhci->xhc_state & XHCI_STATE_HALTED) - return; - mutex_lock(&xhci->mutex); - spin_lock_irq(&xhci->lock); - xhci->xhc_state |= XHCI_STATE_HALTED; - xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; - /* Make sure the xHC is halted for a USB3 roothub - * (xhci_stop() could be called as part of failed init). - */ - xhci_halt(xhci); - xhci_reset(xhci); - spin_unlock_irq(&xhci->lock); + if (!(xhci->xhc_state & XHCI_STATE_HALTED)) { + spin_lock_irq(&xhci->lock); + + xhci->xhc_state |= XHCI_STATE_HALTED; + xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; + xhci_halt(xhci); + xhci_reset(xhci); + + spin_unlock_irq(&xhci->lock); + } + + if (!usb_hcd_is_primary_hcd(hcd)) { + mutex_unlock(&xhci->mutex); + return; + } xhci_cleanup_msix(xhci); -- cgit v1.2.3 From 3425aa03f484d45dc21e0e791c2f6c74ea656421 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Wed, 1 Jun 2016 18:09:08 +0300 Subject: xhci: Fix handling timeouted commands on hosts in weird states. If commands timeout we mark them for abortion, then stop the command ring, and turn the commands to no-ops and finally restart the command ring. If the host is working properly the no-op commands will finish and pending completions are called. If we notice the host is failing, driver clears the command ring and completes, deletes and frees all pending commands. There are two separate cases reported where host is believed to work properly but is not. In the first case we successfully stop the ring but no abort or stop command ring event is ever sent and host locks up. The second case is if a host is removed, command times out and driver believes the ring is stopped, and assumes it will be restarted, but actually ends up timing out on the same command forever. If one of the pending commands has the xhci->mutex held it will block xhci_stop() in the remove codepath which otherwise would cleanup pending commands. Add a check that clears all pending commands in case host is removed, or we are stuck timing out on the same command. Also restart the command timeout timer when stopping the command ring to ensure we recive an ring stop/abort event. Cc: stable Tested-by: Joe Lawrence Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 1287339f11bb..d7d502578d79 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -290,6 +290,14 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; + + /* + * Writing the CMD_RING_ABORT bit should cause a cmd completion event, + * however on some host hw the CMD_RING_RUNNING bit is correctly cleared + * but the completion event in never sent. Use the cmd timeout timer to + * handle those cases. Use twice the time to cover the bit polling retry + */ + mod_timer(&xhci->cmd_timer, jiffies + (2 * XHCI_CMD_DEFAULT_TIMEOUT)); xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring); @@ -314,6 +322,7 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) xhci_err(xhci, "Stopped the command ring failed, " "maybe the host is dead\n"); + del_timer(&xhci->cmd_timer); xhci->xhc_state |= XHCI_STATE_DYING; xhci_quiesce(xhci); xhci_halt(xhci); @@ -1246,22 +1255,21 @@ void xhci_handle_command_timeout(unsigned long data) int ret; unsigned long flags; u64 hw_ring_state; - struct xhci_command *cur_cmd = NULL; + bool second_timeout = false; xhci = (struct xhci_hcd *) data; /* mark this command to be cancelled */ spin_lock_irqsave(&xhci->lock, flags); if (xhci->current_cmd) { - cur_cmd = xhci->current_cmd; - cur_cmd->status = COMP_CMD_ABORT; + if (xhci->current_cmd->status == COMP_CMD_ABORT) + second_timeout = true; + xhci->current_cmd->status = COMP_CMD_ABORT; } - /* Make sure command ring is running before aborting it */ hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) && (hw_ring_state & CMD_RING_RUNNING)) { - spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "Command timeout\n"); ret = xhci_abort_cmd_ring(xhci); @@ -1273,6 +1281,15 @@ void xhci_handle_command_timeout(unsigned long data) } return; } + + /* command ring failed to restart, or host removed. Bail out */ + if (second_timeout || xhci->xhc_state & XHCI_STATE_REMOVING) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "command timed out twice, ring start fail?\n"); + xhci_cleanup_command_queue(xhci); + return; + } + /* command timeout on stopped ring, ring can't be aborted */ xhci_dbg(xhci, "Command timeout on stopped ring\n"); xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd); -- cgit v1.2.3 From de95c40d5beaa47f6dc8fe9ac4159b4672b51523 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 1 Jun 2016 18:09:09 +0300 Subject: usb: xhci-plat: properly handle probe deferral for devm_clk_get() On some platforms, the clocks might be registered by a platform driver. When this is the case, the clock platform driver may very well be probed after xhci-plat, in which case the first probe() invocation of xhci-plat will receive -EPROBE_DEFER as the return value of devm_clk_get(). The current code handles that as a normal error, and simply assumes that this means that the system doesn't have a clock for the XHCI controller, and continues probing without calling clk_prepare_enable(). Unfortunately, this doesn't work on systems where the XHCI controller does have a clock, but that clock is provided by another platform driver. In order to fix this situation, we handle the -EPROBE_DEFER error condition specially, and abort the XHCI controller probe(). It will be retried later automatically, the clock will be available, devm_clk_get() will succeed, and the probe() will continue with the clock prepared and enabled as expected. In practice, such issue is seen on the ARM64 Marvell 7K/8K platform, where the clocks are registered by a platform driver. Cc: Signed-off-by: Thomas Petazzoni Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 676ea458148b..1f3f981fe7f8 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -196,6 +196,9 @@ static int xhci_plat_probe(struct platform_device *pdev) ret = clk_prepare_enable(clk); if (ret) goto put_hcd; + } else if (PTR_ERR(clk) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto put_hcd; } xhci = hcd_to_xhci(hcd); -- cgit v1.2.3 From 757de492f2d5711d4f5b386eb9bdd5cdc99eb30e Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Wed, 1 Jun 2016 18:09:10 +0300 Subject: xhci: fix platform quirks overwrite regression in 4.7-rc1 commit b1c127ae990b ("usb: host: xhci: plat: make use of new methods in xhci_plat_priv") sets xhci->quirks before calling xhci_gen_setup(), which will overwrite them. Don't overwite the quirks, just add the new ones Fixes: b1c127ae990b ("usb: host: xhci: plat: make use of new methods in xhci_plat_priv") Reported-by: Yoshihiro Shimoda Cc: Felipe Balbi Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index fe95602a8ea8..f2f9518c53ab 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4889,7 +4889,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) xhci->hcc_params2 = readl(&xhci->cap_regs->hcc_params2); xhci_print_registers(xhci); - xhci->quirks = quirks; + xhci->quirks |= quirks; get_quirks(dev, xhci); -- cgit v1.2.3 From 81099f97bd31e25ff2719a435b1860fc3876122f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 19 May 2016 17:12:19 +0200 Subject: usb: quirks: Fix sorting Properly sort all the entries by vendor id. Signed-off-by: Hans de Goede Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 6dc810bce295..8130e38cae9d 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -44,6 +44,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + /* USB3503 */ + { USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Microsoft Wireless Laser Mouse 6000 Receiver */ { USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -173,6 +176,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* MAYA44USB sound device */ { USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME }, + /* ASUS Base Station(T100) */ + { USB_DEVICE(0x0b05, 0x17e0), .driver_info = + USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, @@ -188,16 +195,6 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1908, 0x1315), .driver_info = USB_QUIRK_HONOR_BNUMINTERFACES }, - /* INTEL VALUE SSD */ - { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, - - /* USB3503 */ - { USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME }, - - /* ASUS Base Station(T100) */ - { USB_DEVICE(0x0b05, 0x17e0), .driver_info = - USB_QUIRK_IGNORE_REMOTE_WAKEUP }, - /* Protocol and OTG Electrical Test Device */ { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, @@ -208,6 +205,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Blackmagic Design UltraStudio SDI */ { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM }, + /* INTEL VALUE SSD */ + { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, + { } /* terminating entry must be last */ }; -- cgit v1.2.3 From 32cb0b37098f4beeff5ad9e325f11b42a6ede56c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 19 May 2016 17:12:20 +0200 Subject: usb: quirks: Add no-lpm quirk for Acer C120 LED Projector The Acer C120 LED Projector is a USB-3 connected pico projector which takes both its power and video data from USB-3. In combination with some hubs this device does not play well with lpm, so disable lpm for it. Signed-off-by: Hans de Goede Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 8130e38cae9d..944a6dca0fcb 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -199,6 +199,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Acer C120 LED Projector */ + { USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM }, + /* Blackmagic Design Intensity Shuttle */ { USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM }, -- cgit v1.2.3 From 5fc363232ae76805d7f570dbb61758095a540591 Mon Sep 17 00:00:00 2001 From: Tom Yan Date: Tue, 24 May 2016 03:28:44 +0800 Subject: uas: remove can_queue set in host template Commit 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host level") made qdepth limit set in host template (`.can_queue = MAX_CMNDS`) redundant. Removing it to avoid confusion. Signed-off-by: Tom Yan Acked-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/uas.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 4d49fce406e1..e03c490616ef 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -848,7 +848,6 @@ static struct scsi_host_template uas_host_template = { .slave_configure = uas_slave_configure, .eh_abort_handler = uas_eh_abort_handler, .eh_bus_reset_handler = uas_eh_bus_reset_handler, - .can_queue = MAX_CMNDS, .this_id = -1, .sg_tablesize = SG_NONE, .skip_settle_delay = 1, -- cgit v1.2.3 From 593224ea77b1ca842f45cf76f4deeef44dfbacd1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 31 May 2016 09:18:03 +0200 Subject: USB: uas: Fix slave queue_depth not being set Commit 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host level") removed the scsi_change_queue_depth() call from uas_slave_configure() assuming that the slave would inherit the host's queue_depth, which that commit sets to the same value. This is incorrect, without the scsi_change_queue_depth() call the slave's queue_depth defaults to 1, introducing a performance regression. This commit restores the call, fixing the performance regression. Cc: stable@vger.kernel.org Fixes: 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host level") Reported-by: Tom Yan Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/uas.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index e03c490616ef..5ef014ba6ae8 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -836,6 +836,7 @@ static int uas_slave_configure(struct scsi_device *sdev) if (devinfo->flags & US_FL_BROKEN_FUA) sdev->broken_fua = 1; + scsi_change_queue_depth(sdev, devinfo->qdepth - 2); return 0; } -- cgit v1.2.3 From 85e3990bea49a50cb389015fea564b58899ab7c1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 19 May 2016 16:29:50 -0400 Subject: USB: EHCI: avoid undefined pointer arithmetic and placate UBSAN MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Several people have reported that UBSAN doesn't like the pointer arithmetic in ehci_hub_control(): u32 __iomem *status_reg = &ehci->regs->port_status[ (wIndex & 0xff) - 1]; u32 __iomem *hostpc_reg = &ehci->regs->hostpc[(wIndex & 0xff) - 1]; If wIndex is 0 (and it often is), these calculations underflow and UBSAN complains. According to the C standard, pointer computations leading to locations outside the bounds of an array object (other than 1 position past the end) are undefined. In this case, the compiler would be justified in concluding the wIndex can never be 0 and then optimizing away the tests for !wIndex that occur later in the subroutine. (Although, since ehci->regs->port_status and ehci->regs->hostpc are both 0-length arrays and are thus GCC extensions to the C standard, it's not clear what the compiler is really allowed to do.) At any rate, we can avoid all these difficulties, at the cost of making the code slightly longer, by not decrementing the index when it is equal to 0. The runtime effect is minimal, and anyway ehci_hub_control() is not on a hot path. Signed-off-by: Alan Stern Reported-by: Valdis Kletnieks Reported-by: Meelis Roos Reported-by: Martin_MOKREJÅ Reported-by: "Navin P.S" CC: Andrey Ryabinin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hub.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index ffc90295a95f..74f62d68f013 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -872,14 +872,22 @@ int ehci_hub_control( ) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); int ports = HCS_N_PORTS (ehci->hcs_params); - u32 __iomem *status_reg = &ehci->regs->port_status[ - (wIndex & 0xff) - 1]; - u32 __iomem *hostpc_reg = &ehci->regs->hostpc[(wIndex & 0xff) - 1]; + u32 __iomem *status_reg, *hostpc_reg; u32 temp, temp1, status; unsigned long flags; int retval = 0; unsigned selector; + /* + * Avoid underflow while calculating (wIndex & 0xff) - 1. + * The compiler might deduce that wIndex can never be 0 and then + * optimize away the tests for !wIndex below. + */ + temp = wIndex & 0xff; + temp -= (temp > 0); + status_reg = &ehci->regs->port_status[temp]; + hostpc_reg = &ehci->regs->hostpc[temp]; + /* * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR. * HCS_INDICATOR may say we can change LEDs to off/amber/green. -- cgit v1.2.3 From d95815ba6a0f287213118c136e64d8c56daeaeab Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Jun 2016 21:01:29 +0200 Subject: USB: xhci: Add broken streams quirk for Frescologic device id 1009 I got one of these cards for testing uas with, it seems that with streams it dma-s all over the place, corrupting memory. On my first tests it managed to dma over the BIOS of the motherboard somehow and completely bricked it. Tests on another motherboard show that it does work with streams disabled. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 48672fac7ff3..c10972fcc8e4 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -37,6 +37,7 @@ /* Device for a quirk */ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 +#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 #define PCI_VENDOR_ID_ETRON 0x1b6f @@ -114,6 +115,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_TRUST_TX_LENGTH; } + if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009) + xhci->quirks |= XHCI_BROKEN_STREAMS; + if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; -- cgit v1.2.3 From b5801212229f6ca5c418c68cd1e0548f4b53f624 Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Tue, 31 May 2016 10:05:03 -0500 Subject: usb: musb: host: clear rxcsr error bit if set The MUSB Programming Guide states that the driver should clear RXCSR bit2 when the controller sets the bit. Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 2f8ad7f1f482..931381c51ad7 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1870,6 +1870,9 @@ void musb_host_rx(struct musb *musb, u8 epnum) status = -EPROTO; musb_writeb(epio, MUSB_RXINTERVAL, 0); + rx_csr &= ~MUSB_RXCSR_H_ERROR; + musb_writew(epio, MUSB_RXCSR, rx_csr); + } else if (rx_csr & MUSB_RXCSR_DATAERROR) { if (USB_ENDPOINT_XFER_ISOC != qh->type) { -- cgit v1.2.3 From dbac5d07d13e330e6706813c9fde477140fb5d80 Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Tue, 31 May 2016 10:05:04 -0500 Subject: usb: musb: host: don't start next rx urb if current one failed urb->status is set when endpoint csr RXSTALL, H_ERROR, DATAERROR or INCOMPRX bit is set. Those bits mean a broken pipe, so don't start next urb when any of these bits is set by checking urb->status. To minimize the risk of regression, only do so for RX, until we have a test case to understand the behavior of TX. The patch fixes system freeze issue caused by repeatedly invoking RX ISR while removing a usb uart device connected to a hub, in which case the hub has no chance to report the disconnect event due to the kernel is busy in processing the RX interrupt flooding. Fix checkpatch complaint (qh != NULL) as while. Reported-by: Max Uvarov Tested-by: Yegor Yefremov Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 931381c51ad7..dd1ebde02786 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -434,7 +434,13 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb, } } - if (qh != NULL && qh->is_ready) { + /* + * The pipe must be broken if current urb->status is set, so don't + * start next urb. + * TODO: to minimize the risk of regression, only check urb->status + * for RX, until we have a test case to understand the behavior of TX. + */ + if ((!status || !is_in) && qh && qh->is_ready) { dev_dbg(musb->controller, "... next ep%d %cX urb %p\n", hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh)); musb_start_urb(musb, is_in, qh); -- cgit v1.2.3 From 858b9be7fda1d4232e8f06d70e4793bc21583ffc Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 31 May 2016 10:05:05 -0500 Subject: usb: musb: host: move DMA engine check from musb_tx_dma_set_mode_cppi_tusb() to its caller Commit 754fe4a92c07 ("usb: musb: Remove ifdefs for TX DMA for musb_host.c") looks incomplete: the DMA engine checks are done outside the Mentor/UX500 handler but inside the CPPI/TUSB handler. Move the checks out of the CPPI/ TUSB handler into its caller, musb_tx_dma_program(). Signed-off-by: Sergei Shtylyov [b-liu@ti.com: revise subject prefix] Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index dd1ebde02786..45a489e3aeaf 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -684,9 +684,6 @@ static int musb_tx_dma_set_mode_cppi_tusb(struct dma_controller *dma, { struct dma_channel *channel = hw_ep->tx_channel; - if (!is_cppi_enabled(hw_ep->musb) && !tusb_dma_omap(hw_ep->musb)) - return -ENODEV; - channel->actual_len = 0; /* @@ -710,9 +707,11 @@ static bool musb_tx_dma_program(struct dma_controller *dma, if (musb_dma_inventra(hw_ep->musb) || musb_dma_ux500(hw_ep->musb)) res = musb_tx_dma_set_mode_mentor(dma, hw_ep, qh, urb, offset, &length, &mode); - else + else if (is_cppi_enabled(hw_ep->musb) || tusb_dma_omap(hw_ep->musb)) res = musb_tx_dma_set_mode_cppi_tusb(dma, hw_ep, qh, urb, offset, &length, &mode); + else + return false; if (res) return false; -- cgit v1.2.3 From b6a6631dc322b1ca187752a77bc5f74155017ecb Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 31 May 2016 10:05:06 -0500 Subject: usb: musb: host: make musb_tx_dma_set_mode_*() *void* Now that the DMA engine check was moved to musb_tx_dma_porgram(), both musb_tx_dma_set_mode_cppi_tusb() and musb_tx_dma_set_mode_mentor() always return 0, so we can make both these functions *void*. Signed-off-by: Sergei Shtylyov [b-liu@ti.com: revise subject prefix] Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 31 ++++++++++++------------------- 1 file changed, 12 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 45a489e3aeaf..f02361dbfd52 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -633,7 +633,7 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum) ep->rx_reinit = 0; } -static int musb_tx_dma_set_mode_mentor(struct dma_controller *dma, +static void musb_tx_dma_set_mode_mentor(struct dma_controller *dma, struct musb_hw_ep *hw_ep, struct musb_qh *qh, struct urb *urb, u32 offset, u32 *length, u8 *mode) @@ -670,17 +670,15 @@ static int musb_tx_dma_set_mode_mentor(struct dma_controller *dma, } channel->desired_mode = *mode; musb_writew(epio, MUSB_TXCSR, csr); - - return 0; } -static int musb_tx_dma_set_mode_cppi_tusb(struct dma_controller *dma, - struct musb_hw_ep *hw_ep, - struct musb_qh *qh, - struct urb *urb, - u32 offset, - u32 *length, - u8 *mode) +static void musb_tx_dma_set_mode_cppi_tusb(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, + struct musb_qh *qh, + struct urb *urb, + u32 offset, + u32 *length, + u8 *mode) { struct dma_channel *channel = hw_ep->tx_channel; @@ -691,8 +689,6 @@ static int musb_tx_dma_set_mode_cppi_tusb(struct dma_controller *dma, * to identify the zero-length-final-packet case. */ *mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0; - - return 0; } static bool musb_tx_dma_program(struct dma_controller *dma, @@ -702,18 +698,15 @@ static bool musb_tx_dma_program(struct dma_controller *dma, struct dma_channel *channel = hw_ep->tx_channel; u16 pkt_size = qh->maxpacket; u8 mode; - int res; if (musb_dma_inventra(hw_ep->musb) || musb_dma_ux500(hw_ep->musb)) - res = musb_tx_dma_set_mode_mentor(dma, hw_ep, qh, urb, - offset, &length, &mode); + musb_tx_dma_set_mode_mentor(dma, hw_ep, qh, urb, offset, + &length, &mode); else if (is_cppi_enabled(hw_ep->musb) || tusb_dma_omap(hw_ep->musb)) - res = musb_tx_dma_set_mode_cppi_tusb(dma, hw_ep, qh, urb, - offset, &length, &mode); + musb_tx_dma_set_mode_cppi_tusb(dma, hw_ep, qh, urb, offset, + &length, &mode); else return false; - if (res) - return false; qh->segsize = length; -- cgit v1.2.3 From 37f30d887a41775066b78f8c0fa9a4929638db07 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 31 May 2016 10:05:07 -0500 Subject: usb: musb: sunxi: Add set_mode platform function Move the mode handling to the platform_set_mode callback. Signed-off-by: Hans de Goede [b-liu@ti.com: revise subject prefix] Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/sunxi.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index fdab4232cfbf..2c33d9bca587 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -264,15 +264,6 @@ static int sunxi_musb_init(struct musb *musb) if (ret) goto error_unregister_notifier; - if (musb->port_mode == MUSB_PORT_MODE_HOST) { - ret = phy_power_on(glue->phy); - if (ret) - goto error_phy_exit; - set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); - /* Stop musb work from turning vbus off again */ - set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); - } - musb->isr = sunxi_musb_interrupt; /* Stop the musb-core from doing runtime pm (not supported on sunxi) */ @@ -280,8 +271,6 @@ static int sunxi_musb_init(struct musb *musb) return 0; -error_phy_exit: - phy_exit(glue->phy); error_unregister_notifier: if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, @@ -323,6 +312,24 @@ static int sunxi_musb_exit(struct musb *musb) return 0; } +static int sunxi_set_mode(struct musb *musb, u8 mode) +{ + struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + int ret; + + if (mode == MUSB_HOST) { + ret = phy_power_on(glue->phy); + if (ret) + return ret; + + set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); + /* Stop musb work from turning vbus off again */ + set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); + } + + return 0; +} + static void sunxi_musb_enable(struct musb *musb) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); @@ -569,6 +576,7 @@ static const struct musb_platform_ops sunxi_musb_ops = { .exit = sunxi_musb_exit, .enable = sunxi_musb_enable, .disable = sunxi_musb_disable, + .set_mode = sunxi_set_mode, .fifo_offset = sunxi_musb_fifo_offset, .ep_offset = sunxi_musb_ep_offset, .busctl_offset = sunxi_musb_busctl_offset, -- cgit v1.2.3 From a60d541a2d402c8645d5bb2ec8dabe474b66e018 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 31 May 2016 10:05:08 -0500 Subject: usb: musb: sunxi: Set state to A_WAIT_VRISE when enabling Vbus When the board is powering attached usb devices via the otg port sometimes / on some devices it takes slightly too long for the Vbus detection code in phy-sun4i-usb.c to signal that Vbus is high after enabling Vbus and the musb hardware signals a MUSB_INTR_VBUSERROR interrupt. This commit sets the otg state to A_WAIT_VRISE upon enabling Vbus making musb_stage0_irq() ignore the first VBUSERR_RETRY_COUNT VBUSERROR interrupts, fixing connection issues in these cases. Signed-off-by: Hans de Goede [b-liu@ti.com: revise subject prefix] Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/sunxi.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index 2c33d9bca587..e7d46179b485 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -112,7 +112,7 @@ static void sunxi_musb_work(struct work_struct *work) if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) { set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); musb->xceiv->otg->default_a = 1; - musb->xceiv->otg->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; MUSB_HST_MODE(musb); devctl |= MUSB_DEVCTL_SESSION; } else { @@ -145,10 +145,12 @@ static void sunxi_musb_set_vbus(struct musb *musb, int is_on) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); - if (is_on) + if (is_on) { set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); - else + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; + } else { clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); + } schedule_work(&glue->work); } @@ -325,6 +327,7 @@ static int sunxi_set_mode(struct musb *musb, u8 mode) set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); /* Stop musb work from turning vbus off again */ set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; } return 0; -- cgit v1.2.3 From 7e1704dcf6b0a895f99e386ccc9ca631117e6d5b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:09 -0500 Subject: usb: musb: Fix idling after host mode by increasing autosuspend delay Looks like at least 2430 glue won't idle reliably with the 200 ms autosuspend delay. This causes deeper idle states being blocked for the whole SoC when disconnecting OTG A cable. Increasing the delay to 500 ms seems to idle both MUSB and the PHY reliably. This is probably because of time needed by the hardware based negotiation between MUSB and the PHY. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 39fd95833eb8..460176c43e84 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2028,9 +2028,15 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_readl = musb_default_readl; musb_writel = musb_default_writel; - /* We need musb_read/write functions initialized for PM */ + /* + * We need musb_read/write functions initialized for PM. + * Note that at least 2430 glue needs autosuspend delay + * somewhere above 300 ms for the hardware to idle properly + * after disconnecting the cable in host mode. Let's use + * 500 ms for some margin. + */ pm_runtime_use_autosuspend(musb->controller); - pm_runtime_set_autosuspend_delay(musb->controller, 200); + pm_runtime_set_autosuspend_delay(musb->controller, 500); pm_runtime_enable(musb->controller); /* The musb_platform_init() call: -- cgit v1.2.3 From 302f6802395f58dceb225b1c9e603de72f09b8b0 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:10 -0500 Subject: usb: musb: Remove unnecessary shutdown function We have remove() already calling shutdown(), so let's drop it and move the code to remove(). No code changes, we'll drop the the FIXME in the following patch with more clean-up. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 39 ++++++++++++++------------------------- 1 file changed, 14 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 460176c43e84..c370ed59ef7b 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1090,29 +1090,6 @@ void musb_stop(struct musb *musb) musb_platform_try_idle(musb, 0); } -static void musb_shutdown(struct platform_device *pdev) -{ - struct musb *musb = dev_to_musb(&pdev->dev); - unsigned long flags; - - pm_runtime_get_sync(musb->controller); - - musb_host_cleanup(musb); - musb_gadget_cleanup(musb); - - spin_lock_irqsave(&musb->lock, flags); - musb_platform_disable(musb); - musb_generic_disable(musb); - spin_unlock_irqrestore(&musb->lock, flags); - - musb_writeb(musb->mregs, MUSB_DEVCTL, 0); - musb_platform_exit(musb); - - pm_runtime_put(musb->controller); - /* FIXME power down */ -} - - /*-------------------------------------------------------------------------*/ /* @@ -2318,6 +2295,7 @@ static int musb_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct musb *musb = dev_to_musb(dev); + unsigned long flags; /* this gets called on rmmod. * - Host mode: host may still be active @@ -2325,7 +2303,19 @@ static int musb_remove(struct platform_device *pdev) * - OTG mode: both roles are deactivated (or never-activated) */ musb_exit_debugfs(musb); - musb_shutdown(pdev); + + pm_runtime_get_sync(musb->controller); + musb_host_cleanup(musb); + musb_gadget_cleanup(musb); + spin_lock_irqsave(&musb->lock, flags); + musb_platform_disable(musb); + musb_generic_disable(musb); + spin_unlock_irqrestore(&musb->lock, flags); + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + musb_platform_exit(musb); + pm_runtime_put(musb->controller); + /* FIXME power down */ + musb_phy_callback = NULL; if (musb->dma_controller) @@ -2618,7 +2608,6 @@ static struct platform_driver musb_driver = { }, .probe = musb_probe, .remove = musb_remove, - .shutdown = musb_shutdown, }; module_platform_driver(musb_driver); -- cgit v1.2.3 From 7099dbc5b3eb9f52efdb78406826f7463f07d71c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:11 -0500 Subject: usb: musb: Update to use PM runtime autosuspend Let's make the PM runtime use the standard autosuspend calls. Commit 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe error and driver unbind") means we must pair use_autosuspend with dont_use_autosuspend and then use put_sync to properly idle the device. Note that we'll be removing the PM runtime calls from the glue layer to the MUSB core in the next patch. And we can also remove the pointless FIXME comment now. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 9 ++++++--- drivers/usb/musb/musb_gadget.c | 3 ++- drivers/usb/musb/omap2430.c | 5 +++-- 3 files changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index c370ed59ef7b..89c270a99549 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2220,7 +2220,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (status) goto fail5; - pm_runtime_put(musb->controller); + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); /* * For why this is currently needed, see commit 3e43a0725637 @@ -2248,6 +2249,7 @@ fail2_5: usb_phy_shutdown(musb->xceiv); err_usb_phy_init: + pm_runtime_dont_use_autosuspend(musb->controller); pm_runtime_put_sync(musb->controller); fail2: @@ -2313,8 +2315,6 @@ static int musb_remove(struct platform_device *pdev) spin_unlock_irqrestore(&musb->lock, flags); musb_writeb(musb->mregs, MUSB_DEVCTL, 0); musb_platform_exit(musb); - pm_runtime_put(musb->controller); - /* FIXME power down */ musb_phy_callback = NULL; @@ -2326,6 +2326,9 @@ static int musb_remove(struct platform_device *pdev) cancel_work_sync(&musb->irq_work); cancel_delayed_work_sync(&musb->finish_resume_work); cancel_delayed_work_sync(&musb->deassert_reset_work); + pm_runtime_dont_use_autosuspend(musb->controller); + pm_runtime_put_sync(musb->controller); + pm_runtime_disable(musb->controller); musb_free(musb); device_init_wakeup(dev, 0); return 0; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 152865b36522..fff5a8a283e3 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1963,7 +1963,8 @@ static int musb_gadget_stop(struct usb_gadget *g) * that currently misbehaves. */ - pm_runtime_put(musb->controller); + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); return 0; } diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index c84e0322c108..07363d28fbc1 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -435,8 +435,9 @@ static int omap2430_musb_init(struct musb *musb) phy_init(musb->phy); phy_power_on(musb->phy); - pm_runtime_put_noidle(musb->controller); - pm_runtime_put_noidle(glue->dev); + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); + pm_runtime_put(glue->dev); return 0; err1: -- cgit v1.2.3 From f730f205cc5116b6edfedf568fdfbb4935248e8e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:12 -0500 Subject: usb: musb: Split PM runtime between wrapper IP and musb core Let's not tinker with the PM runtime of musb core from the omap2430 wrapper. This allows us to initialize PM runtime for musb core later on instead of doing it in stages. And omap2430 wrapper has no need to for accessing musb core at this point. Note that this does not remove all the PM runtime calls from the glue layer, those will get removed in a later patch. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 39 +++++++++++++++++---------------------- drivers/usb/musb/omap2430.c | 10 ---------- 2 files changed, 17 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 89c270a99549..23888d579e8b 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2005,17 +2005,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_readl = musb_default_readl; musb_writel = musb_default_writel; - /* - * We need musb_read/write functions initialized for PM. - * Note that at least 2430 glue needs autosuspend delay - * somewhere above 300 ms for the hardware to idle properly - * after disconnecting the cable in host mode. Let's use - * 500 ms for some margin. - */ - pm_runtime_use_autosuspend(musb->controller); - pm_runtime_set_autosuspend_delay(musb->controller, 500); - pm_runtime_enable(musb->controller); - /* The musb_platform_init() call: * - adjusts musb->mregs * - sets the musb->isr @@ -2117,6 +2106,16 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (musb->ops->phy_callback) musb_phy_callback = musb->ops->phy_callback; + /* + * We need musb_read/write functions initialized for PM. + * Note that at least 2430 glue needs autosuspend delay + * somewhere above 300 ms for the hardware to idle properly + * after disconnecting the cable in host mode. Let's use + * 500 ms for some margin. + */ + pm_runtime_use_autosuspend(musb->controller); + pm_runtime_set_autosuspend_delay(musb->controller, 500); + pm_runtime_enable(musb->controller); pm_runtime_get_sync(musb->controller); status = usb_phy_init(musb->xceiv); @@ -2251,6 +2250,7 @@ fail2_5: err_usb_phy_init: pm_runtime_dont_use_autosuspend(musb->controller); pm_runtime_put_sync(musb->controller); + pm_runtime_disable(musb->controller); fail2: if (musb->irq_wake) @@ -2258,7 +2258,6 @@ fail2: musb_platform_exit(musb); fail1: - pm_runtime_disable(musb->controller); dev_err(musb->controller, "musb_init_controller failed with status %d\n", status); @@ -2306,6 +2305,9 @@ static int musb_remove(struct platform_device *pdev) */ musb_exit_debugfs(musb); + cancel_work_sync(&musb->irq_work); + cancel_delayed_work_sync(&musb->finish_resume_work); + cancel_delayed_work_sync(&musb->deassert_reset_work); pm_runtime_get_sync(musb->controller); musb_host_cleanup(musb); musb_gadget_cleanup(musb); @@ -2314,21 +2316,14 @@ static int musb_remove(struct platform_device *pdev) musb_generic_disable(musb); spin_unlock_irqrestore(&musb->lock, flags); musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + pm_runtime_dont_use_autosuspend(musb->controller); + pm_runtime_put_sync(musb->controller); + pm_runtime_disable(musb->controller); musb_platform_exit(musb); - musb_phy_callback = NULL; - if (musb->dma_controller) musb_dma_controller_destroy(musb->dma_controller); - usb_phy_shutdown(musb->xceiv); - - cancel_work_sync(&musb->irq_work); - cancel_delayed_work_sync(&musb->finish_resume_work); - cancel_delayed_work_sync(&musb->deassert_reset_work); - pm_runtime_dont_use_autosuspend(musb->controller); - pm_runtime_put_sync(musb->controller); - pm_runtime_disable(musb->controller); musb_free(musb); device_init_wakeup(dev, 0); return 0; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 07363d28fbc1..3ce94bf3f1c7 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -400,13 +400,6 @@ static int omap2430_musb_init(struct musb *musb) if (status < 0) goto err1; - status = pm_runtime_get_sync(dev); - if (status < 0) { - dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status); - pm_runtime_put_sync(glue->dev); - goto err1; - } - l = musb_readl(musb->mregs, OTG_INTERFSEL); if (data->interface_type == MUSB_INTERFACE_UTMI) { @@ -434,9 +427,6 @@ static int omap2430_musb_init(struct musb *musb) phy_init(musb->phy); phy_power_on(musb->phy); - - pm_runtime_mark_last_busy(musb->controller); - pm_runtime_put_autosuspend(musb->controller); pm_runtime_put(glue->dev); return 0; -- cgit v1.2.3 From 30647217909ea8ce4d8f4905b15fa1bb09d80859 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:13 -0500 Subject: usb: musb: Remove conditional PM runtime calls for musb_gadget The conditional use of PM runtime does not work properly for musb gadget. On cable disconnect we may not get any USB_EVENT_NONE leaving the PM runtime call unpaired. Let's fix the issue by making sure the PM runtime calls are paired within the functions. The glue layer will take care of the rest. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index fff5a8a283e3..7ecc893ff3ba 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1914,8 +1914,8 @@ static int musb_gadget_start(struct usb_gadget *g, if (musb->xceiv->last_event == USB_EVENT_ID) musb_platform_set_vbus(musb, 1); - if (musb->xceiv->last_event == USB_EVENT_NONE) - pm_runtime_put(musb->controller); + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); return 0; @@ -1934,8 +1934,7 @@ static int musb_gadget_stop(struct usb_gadget *g) struct musb *musb = gadget_to_musb(g); unsigned long flags; - if (musb->xceiv->last_event == USB_EVENT_NONE) - pm_runtime_get_sync(musb->controller); + pm_runtime_get_sync(musb->controller); /* * REVISIT always use otg_set_peripheral() here too; -- cgit v1.2.3 From 517bafffcaf8f882299a74e310082e7b6b2288ad Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:14 -0500 Subject: usb: musb: Use delayed for musb_gadget_pullup We have MUSB setting pm_runtime_irq_safe with the following commits: 30a70b026b4c ("usb: musb: fix obex in g_nokia.ko causing kernel panic") 3e43a0725637 ("usb: musb: core: add pm_runtime_irq_safe()") Let's fix things to use delayed work so we can remove the pm_runtime_irq_safe. Note that we may want to set this up in a generic way in the gadget framework eventually. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.h | 1 + drivers/usb/musb/musb_gadget.c | 24 ++++++++++++++++++------ 2 files changed, 19 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index b6afe9e43305..29473846b098 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -312,6 +312,7 @@ struct musb { struct work_struct irq_work; struct delayed_work deassert_reset_work; struct delayed_work finish_resume_work; + struct delayed_work gadget_work; u16 hwvers; u16 intrrxe; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 7ecc893ff3ba..af2a3a7addf9 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1656,6 +1656,20 @@ static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA) return usb_phy_set_power(musb->xceiv, mA); } +static void musb_gadget_work(struct work_struct *work) +{ + struct musb *musb; + unsigned long flags; + + musb = container_of(work, struct musb, gadget_work.work); + pm_runtime_get_sync(musb->controller); + spin_lock_irqsave(&musb->lock, flags); + musb_pullup(musb, musb->softconnect); + spin_unlock_irqrestore(&musb->lock, flags); + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); +} + static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on) { struct musb *musb = gadget_to_musb(gadget); @@ -1663,20 +1677,16 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on) is_on = !!is_on; - pm_runtime_get_sync(musb->controller); - /* NOTE: this assumes we are sensing vbus; we'd rather * not pullup unless the B-session is active. */ spin_lock_irqsave(&musb->lock, flags); if (is_on != musb->softconnect) { musb->softconnect = is_on; - musb_pullup(musb, is_on); + schedule_delayed_work(&musb->gadget_work, 0); } spin_unlock_irqrestore(&musb->lock, flags); - pm_runtime_put(musb->controller); - return 0; } @@ -1845,7 +1855,7 @@ int musb_gadget_setup(struct musb *musb) #elif IS_ENABLED(CONFIG_USB_MUSB_GADGET) musb->g.is_otg = 0; #endif - + INIT_DELAYED_WORK(&musb->gadget_work, musb_gadget_work); musb_g_init_endpoints(musb); musb->is_active = 0; @@ -1866,6 +1876,8 @@ void musb_gadget_cleanup(struct musb *musb) { if (musb->port_mode == MUSB_PORT_MODE_HOST) return; + + cancel_delayed_work_sync(&musb->gadget_work); usb_del_gadget_udc(&musb->g); } -- cgit v1.2.3 From 21f77beece2b6f479648192a87ededd2fb8f1716 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:15 -0500 Subject: usb: musb: Handle cable status better for 2430 glue layer We may have drivers loaded but no configured gadgets and MUSB may be in host mode. If gadgets are configured during host mode, PM runtime will get confused. Disable PM runtime from gadget state, and do it based on the cable and last state. Note that we may get multiple cable events, so we need to keep track of the power state. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/omap2430.c | 68 +++++++++++++++++++++++++++++++++++++++------ 1 file changed, 60 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 3ce94bf3f1c7..fa9932910969 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -49,6 +49,9 @@ struct omap2430_glue { enum musb_vbus_id_status status; struct work_struct omap_musb_mailbox_work; struct device *control_otghs; + bool cable_connected; + bool enabled; + bool powered; }; #define glue_to_musb(g) platform_get_drvdata(g->musb) @@ -234,6 +237,45 @@ static inline void omap2430_low_level_init(struct musb *musb) musb_writel(musb->mregs, OTG_FORCESTDBY, l); } +/* + * We can get multiple cable events so we need to keep track + * of the power state. Only keep power enabled if USB cable is + * connected and a gadget is started. + */ +static void omap2430_set_power(struct musb *musb, bool enabled, bool cable) +{ + struct device *dev = musb->controller; + struct omap2430_glue *glue = dev_get_drvdata(dev->parent); + bool power_up; + int res; + + if (glue->enabled != enabled) + glue->enabled = enabled; + + if (glue->cable_connected != cable) + glue->cable_connected = cable; + + power_up = glue->enabled && glue->cable_connected; + if (power_up == glue->powered) { + dev_warn(musb->controller, "power state already %i\n", + power_up); + return; + } + + glue->powered = power_up; + + if (power_up) { + res = pm_runtime_get_sync(musb->controller); + if (res < 0) { + dev_err(musb->controller, "could not enable: %i", res); + glue->powered = false; + } + } else { + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); + } +} + static void omap2430_musb_mailbox(enum musb_vbus_id_status status) { struct omap2430_glue *glue = _glue; @@ -259,6 +301,13 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev); struct omap_musb_board_data *data = pdata->board_data; struct usb_otg *otg = musb->xceiv->otg; + bool cable_connected; + + cable_connected = ((glue->status == MUSB_ID_GROUND) || + (glue->status == MUSB_VBUS_VALID)); + + if (cable_connected) + omap2430_set_power(musb, glue->enabled, cable_connected); switch (glue->status) { case MUSB_ID_GROUND: @@ -268,7 +317,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) musb->xceiv->otg->state = OTG_STATE_A_IDLE; musb->xceiv->last_event = USB_EVENT_ID; if (musb->gadget_driver) { - pm_runtime_get_sync(dev); omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST); omap2430_musb_set_vbus(musb, 1); @@ -281,8 +329,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) otg->default_a = false; musb->xceiv->otg->state = OTG_STATE_B_IDLE; musb->xceiv->last_event = USB_EVENT_VBUS; - if (musb->gadget_driver) - pm_runtime_get_sync(dev); omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); break; @@ -291,11 +337,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) dev_dbg(dev, "VBUS Disconnect\n"); musb->xceiv->last_event = USB_EVENT_NONE; - if (musb->gadget_driver) { + if (musb->gadget_driver) omap2430_musb_set_vbus(musb, 0); - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); - } if (data->interface_type == MUSB_INTERFACE_UTMI) otg_set_vbus(musb->xceiv->otg, 0); @@ -307,6 +350,9 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) dev_dbg(dev, "ID float\n"); } + if (!cable_connected) + omap2430_set_power(musb, glue->enabled, cable_connected); + atomic_notifier_call_chain(&musb->xceiv->notifier, musb->xceiv->last_event, NULL); } @@ -443,6 +489,8 @@ static void omap2430_musb_enable(struct musb *musb) struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev); struct omap_musb_board_data *data = pdata->board_data; + omap2430_set_power(musb, true, glue->cable_connected); + switch (glue->status) { case MUSB_ID_GROUND: @@ -481,6 +529,8 @@ static void omap2430_musb_disable(struct musb *musb) if (glue->status != MUSB_UNKNOWN) omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DISCONNECT); + + omap2430_set_power(musb, false, glue->cable_connected); } static int omap2430_musb_exit(struct musb *musb) @@ -653,11 +703,13 @@ err0: static int omap2430_remove(struct platform_device *pdev) { - struct omap2430_glue *glue = platform_get_drvdata(pdev); + struct omap2430_glue *glue = platform_get_drvdata(pdev); + struct musb *musb = glue_to_musb(glue); pm_runtime_get_sync(glue->dev); cancel_work_sync(&glue->omap_musb_mailbox_work); platform_device_unregister(glue->musb); + omap2430_set_power(musb, false, false); pm_runtime_put_sync(glue->dev); pm_runtime_disable(glue->dev); -- cgit v1.2.3 From a83e17d0f73b2c53ffd40773c227bf4b901365d8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:16 -0500 Subject: usb: musb: Improve PM runtime and phy handling for 2430 glue layer This simplifies things and allows idling both MUSB and PHY when nothing is configured. Let's just return early from PM runtime if musb is not yet initialized. Let's also warn if PHY is not configured. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/omap2430.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index fa9932910969..b81216d1380b 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -435,6 +435,7 @@ static int omap2430_musb_init(struct musb *musb) return PTR_ERR(musb->phy); } musb->isr = omap2430_musb_interrupt; + phy_init(musb->phy); /* * Enable runtime PM for musb parent (this driver). We can't @@ -471,8 +472,6 @@ static int omap2430_musb_init(struct musb *musb) if (glue->status != MUSB_UNKNOWN) omap_musb_set_mailbox(glue); - phy_init(musb->phy); - phy_power_on(musb->phy); pm_runtime_put(glue->dev); return 0; @@ -489,6 +488,9 @@ static void omap2430_musb_enable(struct musb *musb) struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev); struct omap_musb_board_data *data = pdata->board_data; + if (!WARN_ON(!musb->phy)) + phy_power_on(musb->phy); + omap2430_set_power(musb, true, glue->cable_connected); switch (glue->status) { @@ -526,6 +528,9 @@ static void omap2430_musb_disable(struct musb *musb) struct device *dev = musb->controller; struct omap2430_glue *glue = dev_get_drvdata(dev->parent); + if (!WARN_ON(!musb->phy)) + phy_power_off(musb->phy); + if (glue->status != MUSB_UNKNOWN) omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DISCONNECT); @@ -535,11 +540,14 @@ static void omap2430_musb_disable(struct musb *musb) static int omap2430_musb_exit(struct musb *musb) { - del_timer_sync(&musb_idle_timer); + struct device *dev = musb->controller; + struct omap2430_glue *glue = dev_get_drvdata(dev->parent); + del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); - phy_power_off(musb->phy); phy_exit(musb->phy); + musb->phy = NULL; + cancel_work_sync(&glue->omap_musb_mailbox_work); return 0; } @@ -707,7 +715,6 @@ static int omap2430_remove(struct platform_device *pdev) struct musb *musb = glue_to_musb(glue); pm_runtime_get_sync(glue->dev); - cancel_work_sync(&glue->omap_musb_mailbox_work); platform_device_unregister(glue->musb); omap2430_set_power(musb, false, false); pm_runtime_put_sync(glue->dev); @@ -723,12 +730,13 @@ static int omap2430_runtime_suspend(struct device *dev) struct omap2430_glue *glue = dev_get_drvdata(dev); struct musb *musb = glue_to_musb(glue); - if (musb) { - musb->context.otg_interfsel = musb_readl(musb->mregs, - OTG_INTERFSEL); + if (!musb) + return 0; - omap2430_low_level_exit(musb); - } + musb->context.otg_interfsel = musb_readl(musb->mregs, + OTG_INTERFSEL); + + omap2430_low_level_exit(musb); return 0; } @@ -739,7 +747,7 @@ static int omap2430_runtime_resume(struct device *dev) struct musb *musb = glue_to_musb(glue); if (!musb) - return -EPROBE_DEFER; + return 0; omap2430_low_level_init(musb); musb_writel(musb->mregs, OTG_INTERFSEL, -- cgit v1.2.3 From 4dc2fe7a94d07c6148eea5722e23d4c1dbecc9e3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:17 -0500 Subject: usb: musb: Remove try_idle for 2430 glue layer This is no longer needed with PM runtime at least for 2430 glue. We can now rely only on PM runtime and cable detection. The other glue layers can probably remove try_idle too, but that needs to be tested for each platform before doing it. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/omap2430.c | 91 --------------------------------------------- 1 file changed, 91 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index b81216d1380b..53653944cf72 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -57,92 +57,6 @@ struct omap2430_glue { static struct omap2430_glue *_glue; -static struct timer_list musb_idle_timer; - -static void musb_do_idle(unsigned long _musb) -{ - struct musb *musb = (void *)_musb; - unsigned long flags; - u8 power; - u8 devctl; - - spin_lock_irqsave(&musb->lock, flags); - - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_WAIT_BCON: - - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - if (devctl & MUSB_DEVCTL_BDEVICE) { - musb->xceiv->otg->state = OTG_STATE_B_IDLE; - MUSB_DEV_MODE(musb); - } else { - musb->xceiv->otg->state = OTG_STATE_A_IDLE; - MUSB_HST_MODE(musb); - } - break; - case OTG_STATE_A_SUSPEND: - /* finish RESUME signaling? */ - if (musb->port1_status & MUSB_PORT_STAT_RESUME) { - power = musb_readb(musb->mregs, MUSB_POWER); - power &= ~MUSB_POWER_RESUME; - dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power); - musb_writeb(musb->mregs, MUSB_POWER, power); - musb->is_active = 1; - musb->port1_status &= ~(USB_PORT_STAT_SUSPEND - | MUSB_PORT_STAT_RESUME); - musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; - usb_hcd_poll_rh_status(musb->hcd); - /* NOTE: it might really be A_WAIT_BCON ... */ - musb->xceiv->otg->state = OTG_STATE_A_HOST; - } - break; - case OTG_STATE_A_HOST: - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - if (devctl & MUSB_DEVCTL_BDEVICE) - musb->xceiv->otg->state = OTG_STATE_B_IDLE; - else - musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; - default: - break; - } - spin_unlock_irqrestore(&musb->lock, flags); -} - - -static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout) -{ - unsigned long default_timeout = jiffies + msecs_to_jiffies(3); - static unsigned long last_timer; - - if (timeout == 0) - timeout = default_timeout; - - /* Never idle if active, or when VBUS timeout is not set as host */ - if (musb->is_active || ((musb->a_wait_bcon == 0) - && (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) { - dev_dbg(musb->controller, "%s active, deleting timer\n", - usb_otg_state_string(musb->xceiv->otg->state)); - del_timer(&musb_idle_timer); - last_timer = jiffies; - return; - } - - if (time_after(last_timer, timeout)) { - if (!timer_pending(&musb_idle_timer)) - last_timer = timeout; - else { - dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n"); - return; - } - } - last_timer = timeout; - - dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n", - usb_otg_state_string(musb->xceiv->otg->state), - (unsigned long)jiffies_to_msecs(timeout - jiffies)); - mod_timer(&musb_idle_timer, timeout); -} - static void omap2430_musb_set_vbus(struct musb *musb, int is_on) { struct usb_otg *otg = musb->xceiv->otg; @@ -467,8 +381,6 @@ static int omap2430_musb_init(struct musb *musb) musb_readl(musb->mregs, OTG_INTERFSEL), musb_readl(musb->mregs, OTG_SIMENABLE)); - setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); - if (glue->status != MUSB_UNKNOWN) omap_musb_set_mailbox(glue); @@ -543,7 +455,6 @@ static int omap2430_musb_exit(struct musb *musb) struct device *dev = musb->controller; struct omap2430_glue *glue = dev_get_drvdata(dev->parent); - del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); phy_exit(musb->phy); musb->phy = NULL; @@ -562,8 +473,6 @@ static const struct musb_platform_ops omap2430_ops = { .exit = omap2430_musb_exit, .set_mode = omap2430_musb_set_mode, - .try_idle = omap2430_musb_try_idle, - .set_vbus = omap2430_musb_set_vbus, .enable = omap2430_musb_enable, -- cgit v1.2.3 From a118df07f5b19e4879fd67e98a69f4644136877f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:18 -0500 Subject: usb: musb: Don't set d+ high before enable for 2430 glue layer At least 2430 glue layer pulls d+ high on start up even if there are no gadgets configured. This is bad at least for anything using a separate battery charger chip as it can confuse the charger detection. Let's fix the issue by removing the bogus glue layer code tinkering with the SESSION bit. As pointed out Bin Liu and Sergei Shtylyov , the SESSION bit just starts host mode if ID pin is grounded, and starts the srp is ID pin is floating. So without the ID pin changing, it's unable to force musb mode to anything. And just for starting a host mode, things work fine without this code. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/omap2430.c | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 53653944cf72..d312d42592d6 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -122,16 +122,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) musb_readb(musb->mregs, MUSB_DEVCTL)); } -static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode) -{ - u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - - devctl |= MUSB_DEVCTL_SESSION; - musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - - return 0; -} - static inline void omap2430_low_level_exit(struct musb *musb) { u32 l; @@ -472,7 +462,6 @@ static const struct musb_platform_ops omap2430_ops = { .init = omap2430_musb_init, .exit = omap2430_musb_exit, - .set_mode = omap2430_musb_set_mode, .set_vbus = omap2430_musb_set_vbus, .enable = omap2430_musb_enable, -- cgit v1.2.3 From 12b7db2bf8b88938798c60416172b53225207b1f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:19 -0500 Subject: usb: musb: Return error value from musb_mailbox At least on n900 we have phy-twl4030-usb only generating cable interrupts, and then have a separate USB PHY. In order for musb to know the real cable status, we need to clear any cached state until musb is ready. Otherwise the cable status interrupts will get just ignored if the status does not change from the initial state. To do this, let's add a return value to musb_mailbox(), and reset cached linkstat to MUSB_UNKNOWN on error. Sorry to cause a bit of churn here, I should have added that already last time patching musb_mailbox(). Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-twl4030-usb.c | 14 ++++++++++---- drivers/usb/musb/musb_core.c | 7 ++++--- drivers/usb/musb/musb_core.h | 2 +- drivers/usb/musb/omap2430.c | 8 +++++--- drivers/usb/phy/phy-twl6030-usb.c | 12 +++++++++--- include/linux/usb/musb.h | 5 +++-- 6 files changed, 32 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c index 6b6af6cba454..d9b10a39a2cf 100644 --- a/drivers/phy/phy-twl4030-usb.c +++ b/drivers/phy/phy-twl4030-usb.c @@ -463,7 +463,8 @@ static int twl4030_phy_power_on(struct phy *phy) twl4030_usb_set_mode(twl, twl->usb_mode); if (twl->usb_mode == T2_USB_MODE_ULPI) twl4030_i2c_access(twl, 0); - schedule_delayed_work(&twl->id_workaround_work, 0); + twl->linkstat = MUSB_UNKNOWN; + schedule_delayed_work(&twl->id_workaround_work, HZ); return 0; } @@ -537,6 +538,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) struct twl4030_usb *twl = _twl; enum musb_vbus_id_status status; bool status_changed = false; + int err; status = twl4030_usb_linkstat(twl); @@ -567,7 +569,9 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) pm_runtime_mark_last_busy(twl->dev); pm_runtime_put_autosuspend(twl->dev); } - musb_mailbox(status); + err = musb_mailbox(status); + if (err) + twl->linkstat = MUSB_UNKNOWN; } /* don't schedule during sleep - irq works right then */ @@ -595,7 +599,8 @@ static int twl4030_phy_init(struct phy *phy) struct twl4030_usb *twl = phy_get_drvdata(phy); pm_runtime_get_sync(twl->dev); - schedule_delayed_work(&twl->id_workaround_work, 0); + twl->linkstat = MUSB_UNKNOWN; + schedule_delayed_work(&twl->id_workaround_work, HZ); pm_runtime_mark_last_busy(twl->dev); pm_runtime_put_autosuspend(twl->dev); @@ -763,7 +768,8 @@ static int twl4030_usb_remove(struct platform_device *pdev) if (cable_present(twl->linkstat)) pm_runtime_put_noidle(twl->dev); pm_runtime_mark_last_busy(twl->dev); - pm_runtime_put_sync_suspend(twl->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_put_sync(twl->dev); pm_runtime_disable(twl->dev); /* autogate 60MHz ULPI clock, diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 23888d579e8b..6469eff4fc30 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1679,7 +1679,7 @@ EXPORT_SYMBOL_GPL(musb_dma_completion); #define use_dma 0 #endif -static void (*musb_phy_callback)(enum musb_vbus_id_status status); +static int (*musb_phy_callback)(enum musb_vbus_id_status status); /* * musb_mailbox - optional phy notifier function @@ -1688,11 +1688,12 @@ static void (*musb_phy_callback)(enum musb_vbus_id_status status); * Optionally gets called from the USB PHY. Note that the USB PHY must be * disabled at the point the phy_callback is registered or unregistered. */ -void musb_mailbox(enum musb_vbus_id_status status) +int musb_mailbox(enum musb_vbus_id_status status) { if (musb_phy_callback) - musb_phy_callback(status); + return musb_phy_callback(status); + return -ENODEV; }; EXPORT_SYMBOL_GPL(musb_mailbox); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 29473846b098..b55a776b03eb 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -215,7 +215,7 @@ struct musb_platform_ops { dma_addr_t *dma_addr, u32 *len); void (*pre_root_reset_end)(struct musb *musb); void (*post_root_reset_end)(struct musb *musb); - void (*phy_callback)(enum musb_vbus_id_status status); + int (*phy_callback)(enum musb_vbus_id_status status); }; /* diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index d312d42592d6..2c54f52ae386 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -180,22 +180,24 @@ static void omap2430_set_power(struct musb *musb, bool enabled, bool cable) } } -static void omap2430_musb_mailbox(enum musb_vbus_id_status status) +static int omap2430_musb_mailbox(enum musb_vbus_id_status status) { struct omap2430_glue *glue = _glue; if (!glue) { pr_err("%s: musb core is not yet initialized\n", __func__); - return; + return -EPROBE_DEFER; } glue->status = status; if (!glue_to_musb(glue)) { pr_err("%s: musb core is not yet ready\n", __func__); - return; + return -EPROBE_DEFER; } schedule_work(&glue->omap_musb_mailbox_work); + + return 0; } static void omap_musb_set_mailbox(struct omap2430_glue *glue) diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c index 24e2b3cf1867..c66a447c3dfe 100644 --- a/drivers/usb/phy/phy-twl6030-usb.c +++ b/drivers/usb/phy/phy-twl6030-usb.c @@ -227,12 +227,16 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl) twl->asleep = 1; status = MUSB_VBUS_VALID; twl->linkstat = status; - musb_mailbox(status); + ret = musb_mailbox(status); + if (ret) + twl->linkstat = MUSB_UNKNOWN; } else { if (twl->linkstat != MUSB_UNKNOWN) { status = MUSB_VBUS_OFF; twl->linkstat = status; - musb_mailbox(status); + ret = musb_mailbox(status); + if (ret) + twl->linkstat = MUSB_UNKNOWN; if (twl->asleep) { regulator_disable(twl->usb3v3); twl->asleep = 0; @@ -264,7 +268,9 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET); status = MUSB_ID_GROUND; twl->linkstat = status; - musb_mailbox(status); + ret = musb_mailbox(status); + if (ret) + twl->linkstat = MUSB_UNKNOWN; } else { twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR); twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index 0b3da40a525e..d315c8907869 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -142,10 +142,11 @@ enum musb_vbus_id_status { }; #if IS_ENABLED(CONFIG_USB_MUSB_HDRC) -void musb_mailbox(enum musb_vbus_id_status status); +int musb_mailbox(enum musb_vbus_id_status status); #else -static inline void musb_mailbox(enum musb_vbus_id_status status) +static inline int musb_mailbox(enum musb_vbus_id_status status) { + return 0; } #endif -- cgit v1.2.3 From 87326e858448c40e32f142c0b8dcc59d7b27c641 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:20 -0500 Subject: usb: musb: Remove extra PM runtime calls from 2430 glue layer With PM runtime behaving, these are all now unnecessary. Doing pm_runtime_get(musb->controller) will keep the parent glue layer also active. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/omap2430.c | 28 ++++------------------------ 1 file changed, 4 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 2c54f52ae386..22f15b026ab9 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -268,13 +268,8 @@ static void omap_musb_mailbox_work(struct work_struct *mailbox_work) { struct omap2430_glue *glue = container_of(mailbox_work, struct omap2430_glue, omap_musb_mailbox_work); - struct musb *musb = glue_to_musb(glue); - struct device *dev = musb->controller; - pm_runtime_get_sync(dev); omap_musb_set_mailbox(glue); - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); } static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci) @@ -343,16 +338,6 @@ static int omap2430_musb_init(struct musb *musb) musb->isr = omap2430_musb_interrupt; phy_init(musb->phy); - /* - * Enable runtime PM for musb parent (this driver). We can't - * do it earlier as struct musb is not yet allocated and we - * need to touch the musb registers for runtime PM. - */ - pm_runtime_enable(glue->dev); - status = pm_runtime_get_sync(glue->dev); - if (status < 0) - goto err1; - l = musb_readl(musb->mregs, OTG_INTERFSEL); if (data->interface_type == MUSB_INTERFACE_UTMI) { @@ -376,11 +361,7 @@ static int omap2430_musb_init(struct musb *musb) if (glue->status != MUSB_UNKNOWN) omap_musb_set_mailbox(glue); - pm_runtime_put(glue->dev); return 0; - -err1: - return status; } static void omap2430_musb_enable(struct musb *musb) @@ -588,11 +569,9 @@ static int omap2430_probe(struct platform_device *pdev) goto err2; } - /* - * Note that we cannot enable PM runtime yet for this - * driver as we need struct musb initialized first. - * See omap2430_musb_init above. - */ + pm_runtime_enable(glue->dev); + pm_runtime_use_autosuspend(glue->dev); + pm_runtime_set_autosuspend_delay(glue->dev, 500); ret = platform_device_add(musb); if (ret) { @@ -618,6 +597,7 @@ static int omap2430_remove(struct platform_device *pdev) platform_device_unregister(glue->musb); omap2430_set_power(musb, false, false); pm_runtime_put_sync(glue->dev); + pm_runtime_dont_use_autosuspend(glue->dev); pm_runtime_disable(glue->dev); return 0; -- cgit v1.2.3 From 1c4d0b4e18068b49e0eb9bf5125ff25c6d1452cd Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:21 -0500 Subject: usb: musb: Remove pm_runtime_set_irq_safe With the pull up being handled with delayed work, we can now finally remove pm_runtime_set_irq_safe that blocks the MUSB glue from idling. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 6469eff4fc30..0286a39ea01d 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2223,12 +2223,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) pm_runtime_mark_last_busy(musb->controller); pm_runtime_put_autosuspend(musb->controller); - /* - * For why this is currently needed, see commit 3e43a0725637 - * ("usb: musb: core: add pm_runtime_irq_safe()") - */ - pm_runtime_irq_safe(musb->controller); - return 0; fail5: -- cgit v1.2.3 From aec373c1e5d87d791525a675fe726c11d64b84a8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:22 -0500 Subject: usb: musb: Use normal module_init for 2430 glue There's no longer any need for custom initcall level for musb. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/omap2430.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 22f15b026ab9..0b4cec940386 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -669,18 +669,8 @@ static struct platform_driver omap2430_driver = { }, }; +module_platform_driver(omap2430_driver); + MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer"); MODULE_AUTHOR("Felipe Balbi "); MODULE_LICENSE("GPL v2"); - -static int __init omap2430_init(void) -{ - return platform_driver_register(&omap2430_driver); -} -subsys_initcall(omap2430_init); - -static void __exit omap2430_exit(void) -{ - platform_driver_unregister(&omap2430_driver); -} -module_exit(omap2430_exit); -- cgit v1.2.3 From b6a619a883c38e3f01749afe13dd23395c94a058 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:23 -0500 Subject: usb: phy: Check initial state for twl6030 We need to check the state for the PHY with delayed_work as otherwise MUSB will get confused and idles immediately. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/phy/phy-twl6030-usb.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c index c66a447c3dfe..a72e8d670adc 100644 --- a/drivers/usb/phy/phy-twl6030-usb.c +++ b/drivers/usb/phy/phy-twl6030-usb.c @@ -97,6 +97,9 @@ struct twl6030_usb { struct regulator *usb3v3; + /* used to check initial cable status after probe */ + struct delayed_work get_status_work; + /* used to set vbus, in atomic path */ struct work_struct set_vbus_work; @@ -280,6 +283,15 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) return IRQ_HANDLED; } +static void twl6030_status_work(struct work_struct *work) +{ + struct twl6030_usb *twl = container_of(work, struct twl6030_usb, + get_status_work.work); + + twl6030_usb_irq(twl->irq2, twl); + twl6030_usbotg_irq(twl->irq1, twl); +} + static int twl6030_enable_irq(struct twl6030_usb *twl) { twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); @@ -290,8 +302,6 @@ static int twl6030_enable_irq(struct twl6030_usb *twl) REG_INT_MSK_LINE_C); twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, REG_INT_MSK_STS_C); - twl6030_usb_irq(twl->irq2, twl); - twl6030_usbotg_irq(twl->irq1, twl); return 0; } @@ -377,6 +387,7 @@ static int twl6030_usb_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "could not create sysfs file\n"); INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work); + INIT_DELAYED_WORK(&twl->get_status_work, twl6030_status_work); status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, @@ -401,6 +412,7 @@ static int twl6030_usb_probe(struct platform_device *pdev) twl->asleep = 0; twl6030_enable_irq(twl); + schedule_delayed_work(&twl->get_status_work, HZ); dev_info(&pdev->dev, "Initialized TWL6030 USB module\n"); return 0; @@ -410,6 +422,7 @@ static int twl6030_usb_remove(struct platform_device *pdev) { struct twl6030_usb *twl = platform_get_drvdata(pdev); + cancel_delayed_work(&twl->get_status_work); twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, REG_INT_MSK_LINE_C); twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, -- cgit v1.2.3 From 84ac5d1140f716a616522f952734e850448d2556 Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Tue, 31 May 2016 10:05:24 -0500 Subject: usb: musb: only restore devctl when session was set in backup If the session bit was not set in the backup of devctl register, restoring devctl would clear the session bit. Therefor, only restore devctl register when the session bit was set in the backup. This solves the device enumeration failure in otg mode exposed by commit 56f487c (PM / Runtime: Update last_busy in rpm_resume). Cc: # v4.2+ Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 0286a39ea01d..f824336def5c 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2418,7 +2418,8 @@ static void musb_restore_context(struct musb *musb) musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe); musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe); musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe); - musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl); + if (musb->context.devctl & MUSB_DEVCTL_SESSION) + musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl); for (i = 0; i < musb->config->num_eps; ++i) { struct musb_hw_ep *hw_ep; -- cgit v1.2.3 From 04471eb8c3158c0ad9df4b24da845a63b2e8f23a Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Tue, 31 May 2016 10:05:25 -0500 Subject: usb: musb: host: correct cppi dma channel for isoch transfer Incorrect cppi dma channel is referenced in musb_rx_dma_iso_cppi41(), which causes kernel NULL pointer reference oops later when calling cppi41_dma_channel_program(). Fixes: 069a3fd (usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part1) Cc: # v4.2+ Reported-by: Matwey V. Kornilov Acked-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index f02361dbfd52..f0931c418f83 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1549,7 +1549,7 @@ static int musb_rx_dma_iso_cppi41(struct dma_controller *dma, struct urb *urb, size_t len) { - struct dma_channel *channel = hw_ep->tx_channel; + struct dma_channel *channel = hw_ep->rx_channel; void __iomem *epio = hw_ep->regs; dma_addr_t *buf; u32 length, res; -- cgit v1.2.3 From f3eec0cf784e0d6c47822ca6b66df3d5812af7e6 Mon Sep 17 00:00:00 2001 From: Andrew Goodbody Date: Tue, 31 May 2016 10:05:26 -0500 Subject: usb: musb: Ensure rx reinit occurs for shared_fifo endpoints shared_fifo endpoints would only get a previous tx state cleared out, the rx state was only cleared for non shared_fifo endpoints Change this so that the rx state is cleared for all endpoints. This addresses an issue that resulted in rx packets being dropped silently. Signed-off-by: Andrew Goodbody Cc: stable@vger.kernel.org Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index f0931c418f83..327f39c8c174 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -600,14 +600,13 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum) musb_writew(ep->regs, MUSB_TXCSR, 0); /* scrub all previous state, clearing toggle */ - } else { - csr = musb_readw(ep->regs, MUSB_RXCSR); - if (csr & MUSB_RXCSR_RXPKTRDY) - WARNING("rx%d, packet/%d ready?\n", ep->epnum, - musb_readw(ep->regs, MUSB_RXCOUNT)); - - musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG); } + csr = musb_readw(ep->regs, MUSB_RXCSR); + if (csr & MUSB_RXCSR_RXPKTRDY) + WARNING("rx%d, packet/%d ready?\n", ep->epnum, + musb_readw(ep->regs, MUSB_RXCOUNT)); + + musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG); /* target addr and (for multipoint) hub addr/port */ if (musb->is_multipoint) { -- cgit v1.2.3 From 7b2c17f829545df27a910e8d82e133c21c9a8c9c Mon Sep 17 00:00:00 2001 From: Andrew Goodbody Date: Tue, 31 May 2016 10:05:27 -0500 Subject: usb: musb: Stop bulk endpoint while queue is rotated Ensure that the endpoint is stopped by clearing REQPKT before clearing DATAERR_NAKTIMEOUT before rotating the queue on the dedicated bulk endpoint. This addresses an issue where a race could result in the endpoint receiving data before it was reprogrammed resulting in a warning about such data from musb_rx_reinit before it was thrown away. The data thrown away was a valid packet that had been correctly ACKed which meant the host and device got out of sync. Signed-off-by: Andrew Goodbody Cc: stable@vger.kernel.org Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 327f39c8c174..d227a71d85e1 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -992,9 +992,15 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep, if (is_in) { dma = is_dma_capable() ? ep->rx_channel : NULL; - /* clear nak timeout bit */ + /* + * Need to stop the transaction by clearing REQPKT first + * then the NAK Timeout bit ref MUSBMHDRC USB 2.0 HIGH-SPEED + * DUAL-ROLE CONTROLLER Programmer's Guide, section 9.2.2 + */ rx_csr = musb_readw(epio, MUSB_RXCSR); rx_csr |= MUSB_RXCSR_H_WZC_BITS; + rx_csr &= ~MUSB_RXCSR_H_REQPKT; + musb_writew(epio, MUSB_RXCSR, rx_csr); rx_csr &= ~MUSB_RXCSR_DATAERROR; musb_writew(epio, MUSB_RXCSR, rx_csr); -- cgit v1.2.3 From 72ad679aa7182d23d269cbe4d655f7e129d3b057 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Mon, 16 May 2016 12:45:36 -0300 Subject: clk: nxp: Select MFD_SYSCON for creg driver Commit 378523d15003 ("clk: add lpc18xx creg clk driver") added a new clock driver but missed the proper MFD_SYSCON select. Fix it. Fixes: 378523d15003 ("clk: add lpc18xx creg clk driver") Signed-off-by: Ezequiel Garcia Acked-by: Joachim Eastwood Signed-off-by: Stephen Boyd --- drivers/clk/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 53ddba26578c..98efbfcdb503 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -175,6 +175,7 @@ config COMMON_CLK_KEYSTONE config COMMON_CLK_NXP def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX) select REGMAP_MMIO if ARCH_LPC32XX + select MFD_SYSCON if ARCH_LPC18XX ---help--- Support for clock providers on NXP platforms. -- cgit v1.2.3 From 6b7e9cde49691e04314342b7dce90c67ad567fcc Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Thu, 12 May 2016 22:17:34 -0400 Subject: sd: Fix rw_max for devices that report an optimal xfer size For historic reasons, io_opt is in bytes and max_sectors in block layer sectors. This interface inconsistency is error prone and should be fixed. But for 4.4--4.7 let's make the unit difference explicit via a wrapper function. Fixes: d0eb20a863ba ("sd: Optimal I/O size is in bytes, not sectors") Cc: stable@vger.kernel.org # 4.4+ Reported-by: Fam Zheng Reviewed-by: Bart Van Assche Reviewed-by: Christoph Hellwig Tested-by: Andrew Patterson Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 8 ++++---- drivers/scsi/sd.h | 5 +++++ 2 files changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index f459dff30512..60bff78e9ead 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2867,10 +2867,10 @@ static int sd_revalidate_disk(struct gendisk *disk) if (sdkp->opt_xfer_blocks && sdkp->opt_xfer_blocks <= dev_max && sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS && - sdkp->opt_xfer_blocks * sdp->sector_size >= PAGE_SIZE) - rw_max = q->limits.io_opt = - sdkp->opt_xfer_blocks * sdp->sector_size; - else + logical_to_bytes(sdp, sdkp->opt_xfer_blocks) >= PAGE_SIZE) { + q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks); + rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks); + } else rw_max = BLK_DEF_MAX_SECTORS; /* Combine with controller limits */ diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 654630bb7d0e..765a6f1ac1b7 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -151,6 +151,11 @@ static inline sector_t logical_to_sectors(struct scsi_device *sdev, sector_t blo return blocks << (ilog2(sdev->sector_size) - 9); } +static inline unsigned int logical_to_bytes(struct scsi_device *sdev, sector_t blocks) +{ + return blocks * sdev->sector_size; +} + /* * A DIF-capable target device can be formatted with different * protection schemes. Currently 0 through 3 are defined: -- cgit v1.2.3 From bc9139d23f6b038e32bcd2dffdee70a8d76b3976 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 25 May 2016 10:56:24 +1000 Subject: drm/nouveau/bios/disp: fix handling of "match any protocol" entries As it turns out, a value of 0xff means "any protocol" and not "VGA". Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/include/nvkm/subdev/bios/disp.h | 5 +++-- drivers/gpu/drm/nouveau/nvkm/engine/disp/gf119.c | 13 +++++-------- drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c | 12 ++++-------- drivers/gpu/drm/nouveau/nvkm/subdev/bios/disp.c | 8 +++++--- 4 files changed, 17 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/include/nvkm/subdev/bios/disp.h b/drivers/gpu/drm/nouveau/include/nvkm/subdev/bios/disp.h index db10c11f0595..c5a6ebd5a478 100644 --- a/drivers/gpu/drm/nouveau/include/nvkm/subdev/bios/disp.h +++ b/drivers/gpu/drm/nouveau/include/nvkm/subdev/bios/disp.h @@ -25,7 +25,8 @@ u16 nvbios_outp_match(struct nvkm_bios *, u16 type, u16 mask, u8 *ver, u8 *hdr, u8 *cnt, u8 *len, struct nvbios_outp *); struct nvbios_ocfg { - u16 match; + u8 proto; + u8 flags; u16 clkcmp[2]; }; @@ -33,7 +34,7 @@ u16 nvbios_ocfg_entry(struct nvkm_bios *, u16 outp, u8 idx, u8 *ver, u8 *hdr, u8 *cnt, u8 *len); u16 nvbios_ocfg_parse(struct nvkm_bios *, u16 outp, u8 idx, u8 *ver, u8 *hdr, u8 *cnt, u8 *len, struct nvbios_ocfg *); -u16 nvbios_ocfg_match(struct nvkm_bios *, u16 outp, u16 type, +u16 nvbios_ocfg_match(struct nvkm_bios *, u16 outp, u8 proto, u8 flags, u8 *ver, u8 *hdr, u8 *cnt, u8 *len, struct nvbios_ocfg *); u16 nvbios_oclk_match(struct nvkm_bios *, u16 cmp, u32 khz); #endif diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/gf119.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/gf119.c index f0314664349c..5dd34382f55a 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/gf119.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/gf119.c @@ -76,6 +76,7 @@ exec_lookup(struct nv50_disp *disp, int head, int or, u32 ctrl, mask |= 0x0001 << or; mask |= 0x0100 << head; + list_for_each_entry(outp, &disp->base.outp, head) { if ((outp->info.hasht & 0xff) == type && (outp->info.hashm & mask) == mask) { @@ -155,25 +156,21 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, u32 pclk, u32 *conf) if (!outp) return NULL; + *conf = (ctrl & 0x00000f00) >> 8; switch (outp->info.type) { case DCB_OUTPUT_TMDS: - *conf = (ctrl & 0x00000f00) >> 8; if (*conf == 5) *conf |= 0x0100; break; case DCB_OUTPUT_LVDS: - *conf = disp->sor.lvdsconf; - break; - case DCB_OUTPUT_DP: - *conf = (ctrl & 0x00000f00) >> 8; + *conf |= disp->sor.lvdsconf; break; - case DCB_OUTPUT_ANALOG: default: - *conf = 0x00ff; break; } - data = nvbios_ocfg_match(bios, data, *conf, &ver, &hdr, &cnt, &len, &info2); + data = nvbios_ocfg_match(bios, data, *conf & 0xff, *conf >> 8, + &ver, &hdr, &cnt, &len, &info2); if (data && id < 0xff) { data = nvbios_oclk_match(bios, info2.clkcmp[id], pclk); if (data) { diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c index 4226d2153b9c..fcb1b0c46d64 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c @@ -387,22 +387,17 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, u32 pclk, u32 *conf) if (!outp) return NULL; + *conf = (ctrl & 0x00000f00) >> 8; if (outp->info.location == 0) { switch (outp->info.type) { case DCB_OUTPUT_TMDS: - *conf = (ctrl & 0x00000f00) >> 8; if (*conf == 5) *conf |= 0x0100; break; case DCB_OUTPUT_LVDS: - *conf = disp->sor.lvdsconf; + *conf |= disp->sor.lvdsconf; break; - case DCB_OUTPUT_DP: - *conf = (ctrl & 0x00000f00) >> 8; - break; - case DCB_OUTPUT_ANALOG: default: - *conf = 0x00ff; break; } } else { @@ -410,7 +405,8 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, u32 pclk, u32 *conf) pclk = pclk / 2; } - data = nvbios_ocfg_match(bios, data, *conf, &ver, &hdr, &cnt, &len, &info2); + data = nvbios_ocfg_match(bios, data, *conf & 0xff, *conf >> 8, + &ver, &hdr, &cnt, &len, &info2); if (data && id < 0xff) { data = nvbios_oclk_match(bios, info2.clkcmp[id], pclk); if (data) { diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/disp.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/disp.c index a5e92135cd77..9efb1b48cd54 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/disp.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/disp.c @@ -141,7 +141,8 @@ nvbios_ocfg_parse(struct nvkm_bios *bios, u16 outp, u8 idx, { u16 data = nvbios_ocfg_entry(bios, outp, idx, ver, hdr, cnt, len); if (data) { - info->match = nvbios_rd16(bios, data + 0x00); + info->proto = nvbios_rd08(bios, data + 0x00); + info->flags = nvbios_rd16(bios, data + 0x01); info->clkcmp[0] = nvbios_rd16(bios, data + 0x02); info->clkcmp[1] = nvbios_rd16(bios, data + 0x04); } @@ -149,12 +150,13 @@ nvbios_ocfg_parse(struct nvkm_bios *bios, u16 outp, u8 idx, } u16 -nvbios_ocfg_match(struct nvkm_bios *bios, u16 outp, u16 type, +nvbios_ocfg_match(struct nvkm_bios *bios, u16 outp, u8 proto, u8 flags, u8 *ver, u8 *hdr, u8 *cnt, u8 *len, struct nvbios_ocfg *info) { u16 data, idx = 0; while ((data = nvbios_ocfg_parse(bios, outp, idx++, ver, hdr, cnt, len, info))) { - if (info->match == type) + if ((info->proto == proto || info->proto == 0xff) && + (info->flags == flags)) break; } return data; -- cgit v1.2.3 From 9057c8d75018f05bbc769d7b4602de3b8b20f8aa Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 27 May 2016 12:01:27 +1000 Subject: drm/nouveau/ltc/gm107-: fix typo in the address of NV_PLTCG_LTC0_LTS0_INTR Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gm107.c | 6 +++--- drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gm200.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gm107.c b/drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gm107.c index e292f5679418..389fb13a1998 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gm107.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gm107.c @@ -69,11 +69,11 @@ gm107_ltc_zbc_clear_depth(struct nvkm_ltc *ltc, int i, const u32 depth) } static void -gm107_ltc_lts_isr(struct nvkm_ltc *ltc, int c, int s) +gm107_ltc_intr_lts(struct nvkm_ltc *ltc, int c, int s) { struct nvkm_subdev *subdev = <c->subdev; struct nvkm_device *device = subdev->device; - u32 base = 0x140000 + (c * 0x2000) + (s * 0x200); + u32 base = 0x140400 + (c * 0x2000) + (s * 0x200); u32 stat = nvkm_rd32(device, base + 0x00c); if (stat) { @@ -92,7 +92,7 @@ gm107_ltc_intr(struct nvkm_ltc *ltc) while (mask) { u32 s, c = __ffs(mask); for (s = 0; s < ltc->lts_nr; s++) - gm107_ltc_lts_isr(ltc, c, s); + gm107_ltc_intr_lts(ltc, c, s); mask &= ~(1 << c); } } diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gm200.c b/drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gm200.c index 2a29bfd5125a..e18e0dc19ec8 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gm200.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gm200.c @@ -46,7 +46,7 @@ static const struct nvkm_ltc_func gm200_ltc = { .oneinit = gm200_ltc_oneinit, .init = gm200_ltc_init, - .intr = gm107_ltc_intr, /*XXX: not validated */ + .intr = gm107_ltc_intr, .cbc_clear = gm107_ltc_cbc_clear, .cbc_wait = gm107_ltc_cbc_wait, .zbc = 16, -- cgit v1.2.3 From 383d0a419f8e63e3d65e706c3c515fa9505ce364 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 1 Jun 2016 16:20:10 +1000 Subject: drm/nouveau/gr/gf100-: update sm error decoding from gk20a nvgpu headers Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c | 37 +++++++++++++++++++------- 1 file changed, 28 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c index 9513badb8220..ae9ab5b1ab97 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c @@ -949,22 +949,41 @@ gf100_gr_trap_gpc_rop(struct gf100_gr *gr, int gpc) } static const struct nvkm_enum gf100_mp_warp_error[] = { - { 0x00, "NO_ERROR" }, - { 0x01, "STACK_MISMATCH" }, + { 0x01, "STACK_ERROR" }, + { 0x02, "API_STACK_ERROR" }, + { 0x03, "RET_EMPTY_STACK_ERROR" }, + { 0x04, "PC_WRAP" }, { 0x05, "MISALIGNED_PC" }, - { 0x08, "MISALIGNED_GPR" }, - { 0x09, "INVALID_OPCODE" }, - { 0x0d, "GPR_OUT_OF_BOUNDS" }, - { 0x0e, "MEM_OUT_OF_BOUNDS" }, - { 0x0f, "UNALIGNED_MEM_ACCESS" }, + { 0x06, "PC_OVERFLOW" }, + { 0x07, "MISALIGNED_IMMC_ADDR" }, + { 0x08, "MISALIGNED_REG" }, + { 0x09, "ILLEGAL_INSTR_ENCODING" }, + { 0x0a, "ILLEGAL_SPH_INSTR_COMBO" }, + { 0x0b, "ILLEGAL_INSTR_PARAM" }, + { 0x0c, "INVALID_CONST_ADDR" }, + { 0x0d, "OOR_REG" }, + { 0x0e, "OOR_ADDR" }, + { 0x0f, "MISALIGNED_ADDR" }, { 0x10, "INVALID_ADDR_SPACE" }, - { 0x11, "INVALID_PARAM" }, + { 0x11, "ILLEGAL_INSTR_PARAM2" }, + { 0x12, "INVALID_CONST_ADDR_LDC" }, + { 0x13, "GEOMETRY_SM_ERROR" }, + { 0x14, "DIVERGENT" }, + { 0x15, "WARP_EXIT" }, {} }; static const struct nvkm_bitfield gf100_mp_global_error[] = { + { 0x00000001, "SM_TO_SM_FAULT" }, + { 0x00000002, "L1_ERROR" }, { 0x00000004, "MULTIPLE_WARP_ERRORS" }, - { 0x00000008, "OUT_OF_STACK_SPACE" }, + { 0x00000008, "PHYSICAL_STACK_OVERFLOW" }, + { 0x00000010, "BPT_INT" }, + { 0x00000020, "BPT_PAUSE" }, + { 0x00000040, "SINGLE_STEP_COMPLETE" }, + { 0x20000000, "ECC_SEC_ERROR" }, + { 0x40000000, "ECC_DED_ERROR" }, + { 0x80000000, "TIMEOUT" }, {} }; -- cgit v1.2.3 From f045f459d925138fe7d6193a8c86406bda7e49da Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 2 Jun 2016 12:23:31 +1000 Subject: drm/nouveau/fbcon: fix out-of-bounds memory accesses Reported by KASAN. Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 1 + drivers/gpu/drm/nouveau/nv04_fbcon.c | 7 ++----- drivers/gpu/drm/nouveau/nv50_fbcon.c | 6 ++---- drivers/gpu/drm/nouveau/nvc0_fbcon.c | 6 ++---- 4 files changed, 7 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 57aaf98a26f9..300ea03be8f0 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -552,6 +552,7 @@ nouveau_fbcon_init(struct drm_device *dev) if (ret) goto fini; + fbcon->helper.fbdev->pixmap.buf_align = 4; return 0; fini: diff --git a/drivers/gpu/drm/nouveau/nv04_fbcon.c b/drivers/gpu/drm/nouveau/nv04_fbcon.c index 0f3e4bb411cc..7d9248b8c664 100644 --- a/drivers/gpu/drm/nouveau/nv04_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv04_fbcon.c @@ -82,7 +82,6 @@ nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) uint32_t fg; uint32_t bg; uint32_t dsize; - uint32_t width; uint32_t *data = (uint32_t *)image->data; int ret; @@ -93,9 +92,6 @@ nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) if (ret) return ret; - width = ALIGN(image->width, 8); - dsize = ALIGN(width * image->height, 32) >> 5; - if (info->fix.visual == FB_VISUAL_TRUECOLOR || info->fix.visual == FB_VISUAL_DIRECTCOLOR) { fg = ((uint32_t *) info->pseudo_palette)[image->fg_color]; @@ -111,10 +107,11 @@ nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) ((image->dx + image->width) & 0xffff)); OUT_RING(chan, bg); OUT_RING(chan, fg); - OUT_RING(chan, (image->height << 16) | width); + OUT_RING(chan, (image->height << 16) | image->width); OUT_RING(chan, (image->height << 16) | image->width); OUT_RING(chan, (image->dy << 16) | (image->dx & 0xffff)); + dsize = ALIGN(image->width * image->height, 32) >> 5; while (dsize) { int iter_len = dsize > 128 ? 128 : dsize; diff --git a/drivers/gpu/drm/nouveau/nv50_fbcon.c b/drivers/gpu/drm/nouveau/nv50_fbcon.c index 33d9ee0fac40..1aeb698e9707 100644 --- a/drivers/gpu/drm/nouveau/nv50_fbcon.c +++ b/drivers/gpu/drm/nouveau/nv50_fbcon.c @@ -95,7 +95,7 @@ nv50_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) struct nouveau_fbdev *nfbdev = info->par; struct nouveau_drm *drm = nouveau_drm(nfbdev->dev); struct nouveau_channel *chan = drm->channel; - uint32_t width, dwords, *data = (uint32_t *)image->data; + uint32_t dwords, *data = (uint32_t *)image->data; uint32_t mask = ~(~0 >> (32 - info->var.bits_per_pixel)); uint32_t *palette = info->pseudo_palette; int ret; @@ -107,9 +107,6 @@ nv50_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) if (ret) return ret; - width = ALIGN(image->width, 32); - dwords = (width * image->height) >> 5; - BEGIN_NV04(chan, NvSub2D, 0x0814, 2); if (info->fix.visual == FB_VISUAL_TRUECOLOR || info->fix.visual == FB_VISUAL_DIRECTCOLOR) { @@ -128,6 +125,7 @@ nv50_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) OUT_RING(chan, 0); OUT_RING(chan, image->dy); + dwords = ALIGN(image->width * image->height, 32) >> 5; while (dwords) { int push = dwords > 2047 ? 2047 : dwords; diff --git a/drivers/gpu/drm/nouveau/nvc0_fbcon.c b/drivers/gpu/drm/nouveau/nvc0_fbcon.c index a0913359ac05..839f4c8c1805 100644 --- a/drivers/gpu/drm/nouveau/nvc0_fbcon.c +++ b/drivers/gpu/drm/nouveau/nvc0_fbcon.c @@ -95,7 +95,7 @@ nvc0_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) struct nouveau_fbdev *nfbdev = info->par; struct nouveau_drm *drm = nouveau_drm(nfbdev->dev); struct nouveau_channel *chan = drm->channel; - uint32_t width, dwords, *data = (uint32_t *)image->data; + uint32_t dwords, *data = (uint32_t *)image->data; uint32_t mask = ~(~0 >> (32 - info->var.bits_per_pixel)); uint32_t *palette = info->pseudo_palette; int ret; @@ -107,9 +107,6 @@ nvc0_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) if (ret) return ret; - width = ALIGN(image->width, 32); - dwords = (width * image->height) >> 5; - BEGIN_NVC0(chan, NvSub2D, 0x0814, 2); if (info->fix.visual == FB_VISUAL_TRUECOLOR || info->fix.visual == FB_VISUAL_DIRECTCOLOR) { @@ -128,6 +125,7 @@ nvc0_fbcon_imageblit(struct fb_info *info, const struct fb_image *image) OUT_RING (chan, 0); OUT_RING (chan, image->dy); + dwords = ALIGN(image->width * image->height, 32) >> 5; while (dwords) { int push = dwords > 2047 ? 2047 : dwords; -- cgit v1.2.3 From 77154fd969df749f5bf83f639af19fca199de033 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 2 Jun 2016 12:42:32 +1000 Subject: drm/nouveau/core: swap the order of imem/fb Fixes a use-after-free reported by valgrind and KASAN. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/include/nvkm/core/device.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/include/nvkm/core/device.h b/drivers/gpu/drm/nouveau/include/nvkm/core/device.h index c612dc1f1eb4..126a85cc81bc 100644 --- a/drivers/gpu/drm/nouveau/include/nvkm/core/device.h +++ b/drivers/gpu/drm/nouveau/include/nvkm/core/device.h @@ -16,9 +16,9 @@ enum nvkm_devidx { NVKM_SUBDEV_MC, NVKM_SUBDEV_BUS, NVKM_SUBDEV_TIMER, + NVKM_SUBDEV_INSTMEM, NVKM_SUBDEV_FB, NVKM_SUBDEV_LTC, - NVKM_SUBDEV_INSTMEM, NVKM_SUBDEV_MMU, NVKM_SUBDEV_BAR, NVKM_SUBDEV_PMU, -- cgit v1.2.3 From bfa49cfc526201119623de6593d284c96563bede Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 1 Jun 2016 14:16:50 +0100 Subject: net/ethoc: fix null dereference on error exit path priv is assigned to NULL however some of the early error exit paths to label 'free' dereference priv, causing a null pointer dereference. Move the label 'free' to just the free_netdev statement, and add a new exit path 'free2' for the error cases were clk_disable_unprepare needs calling before the final free. Fixes issue found by CoverityScan, CID#113260 Signed-off-by: Colin Ian King Reviewed-by: Max Filippov Signed-off-by: David S. Miller --- drivers/net/ethernet/ethoc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index 41b010645100..4edb98c3c6c7 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -1195,7 +1195,7 @@ static int ethoc_probe(struct platform_device *pdev) priv->mdio = mdiobus_alloc(); if (!priv->mdio) { ret = -ENOMEM; - goto free; + goto free2; } priv->mdio->name = "ethoc-mdio"; @@ -1208,7 +1208,7 @@ static int ethoc_probe(struct platform_device *pdev) ret = mdiobus_register(priv->mdio); if (ret) { dev_err(&netdev->dev, "failed to register MDIO bus\n"); - goto free; + goto free2; } ret = ethoc_mdio_probe(netdev); @@ -1241,9 +1241,10 @@ error2: error: mdiobus_unregister(priv->mdio); mdiobus_free(priv->mdio); -free: +free2: if (priv->clk) clk_disable_unprepare(priv->clk); +free: free_netdev(netdev); out: return ret; -- cgit v1.2.3 From 14b84e8654c89ed59f433654e6bb64c886d095cd Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 1 Jun 2016 15:29:13 +0200 Subject: qed: fix qed_fill_link() error handling gcc warns about qed_fill_link possibly accessing uninitialized data: drivers/net/ethernet/qlogic/qed/qed_main.c: In function 'qed_fill_link': drivers/net/ethernet/qlogic/qed/qed_main.c:1170:35: error: 'link_caps' may be used uninitialized in this function [-Werror=maybe-uninitialized] While this warning is only about the specific case of CONFIG_QED_SRIOV being disabled but the function getting called for a VF (which should never happen), another possibility is that qed_mcp_get_*() fails without returning data. This rearranges the code so we bail out in either of the two cases and print a warning instead of accessing the uninitialized data. The qed_link_output structure remains untouched in this case, but all callers first call memset() on it, so at least we are not leaking stack data then. As discussed, we also use a compile-time check to ensure we never use any of the VF code if CONFIG_QED_SRIOV is disabled, and the PCI device table is updated to no longer bind to virtual functions in that configuration. Signed-off-by: Arnd Bergmann Acked-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_main.c | 45 ++++++++++++++++++++++------ drivers/net/ethernet/qlogic/qed/qed_sriov.h | 4 ++- drivers/net/ethernet/qlogic/qede/qede_main.c | 2 ++ 3 files changed, 41 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 753064679bde..61cc6869fa65 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -1105,6 +1105,39 @@ static int qed_get_port_type(u32 media_type) return port_type; } +static int qed_get_link_data(struct qed_hwfn *hwfn, + struct qed_mcp_link_params *params, + struct qed_mcp_link_state *link, + struct qed_mcp_link_capabilities *link_caps) +{ + void *p; + + if (!IS_PF(hwfn->cdev)) { + qed_vf_get_link_params(hwfn, params); + qed_vf_get_link_state(hwfn, link); + qed_vf_get_link_caps(hwfn, link_caps); + + return 0; + } + + p = qed_mcp_get_link_params(hwfn); + if (!p) + return -ENXIO; + memcpy(params, p, sizeof(*params)); + + p = qed_mcp_get_link_state(hwfn); + if (!p) + return -ENXIO; + memcpy(link, p, sizeof(*link)); + + p = qed_mcp_get_link_capabilities(hwfn); + if (!p) + return -ENXIO; + memcpy(link_caps, p, sizeof(*link_caps)); + + return 0; +} + static void qed_fill_link(struct qed_hwfn *hwfn, struct qed_link_output *if_link) { @@ -1116,15 +1149,9 @@ static void qed_fill_link(struct qed_hwfn *hwfn, memset(if_link, 0, sizeof(*if_link)); /* Prepare source inputs */ - if (IS_PF(hwfn->cdev)) { - memcpy(¶ms, qed_mcp_get_link_params(hwfn), sizeof(params)); - memcpy(&link, qed_mcp_get_link_state(hwfn), sizeof(link)); - memcpy(&link_caps, qed_mcp_get_link_capabilities(hwfn), - sizeof(link_caps)); - } else { - qed_vf_get_link_params(hwfn, ¶ms); - qed_vf_get_link_state(hwfn, &link); - qed_vf_get_link_caps(hwfn, &link_caps); + if (qed_get_link_data(hwfn, ¶ms, &link, &link_caps)) { + dev_warn(&hwfn->cdev->pdev->dev, "no link data available\n"); + return; } /* Set the link parameters to pass to protocol driver */ diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.h b/drivers/net/ethernet/qlogic/qed/qed_sriov.h index c8667c65e685..c90b2b6ad969 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sriov.h +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.h @@ -12,11 +12,13 @@ #include "qed_vf.h" #define QED_VF_ARRAY_LENGTH (3) +#ifdef CONFIG_QED_SRIOV #define IS_VF(cdev) ((cdev)->b_is_vf) #define IS_PF(cdev) (!((cdev)->b_is_vf)) -#ifdef CONFIG_QED_SRIOV #define IS_PF_SRIOV(p_hwfn) (!!((p_hwfn)->cdev->p_iov_info)) #else +#define IS_VF(cdev) (0) +#define IS_PF(cdev) (1) #define IS_PF_SRIOV(p_hwfn) (0) #endif #define IS_PF_SRIOV_ALLOC(p_hwfn) (!!((p_hwfn)->pf_iov_info)) diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 5d00d1404bfc..5733d1888223 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -87,7 +87,9 @@ static const struct pci_device_id qede_pci_tbl[] = { {PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_100), QEDE_PRIVATE_PF}, {PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_50), QEDE_PRIVATE_PF}, {PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_25), QEDE_PRIVATE_PF}, +#ifdef CONFIG_QED_SRIOV {PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_IOV), QEDE_PRIVATE_VF}, +#endif { 0 } }; -- cgit v1.2.3 From f55d84b07c4e7340473a25dc82b462607578402c Mon Sep 17 00:00:00 2001 From: Vincent Palatin Date: Wed, 1 Jun 2016 08:53:48 -0700 Subject: stmmac: do not sleep in atomic context for mdio_reset stmmac_mdio_reset() has been updated to use msleep rather udelay (as some PHY requires a one second delay there). It called from stmmac_resume() within the spin_lock_irqsave block atomic context triggering 'scheduling while atomic'. The stmmac_priv lock usage is not fully documented, but it seems to protect the access to the MAC registers / DMA structures rather than the MDIO bus or the PHY (which have separate locking), so we can push the spin_lock after the stmmac_mdio_reset call. Signed-off-by: Vincent Palatin Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index eac45d0c75e2..a473c182c91d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3450,8 +3450,6 @@ int stmmac_resume(struct device *dev) if (!netif_running(ndev)) return 0; - spin_lock_irqsave(&priv->lock, flags); - /* Power Down bit, into the PM register, is cleared * automatically as soon as a magic packet or a Wake-up frame * is received. Anyway, it's better to manually clear @@ -3459,7 +3457,9 @@ int stmmac_resume(struct device *dev) * from another devices (e.g. serial console). */ if (device_may_wakeup(priv->device)) { + spin_lock_irqsave(&priv->lock, flags); priv->hw->mac->pmt(priv->hw, 0); + spin_unlock_irqrestore(&priv->lock, flags); priv->irq_wake = 0; } else { pinctrl_pm_select_default_state(priv->device); @@ -3473,6 +3473,8 @@ int stmmac_resume(struct device *dev) netif_device_attach(ndev); + spin_lock_irqsave(&priv->lock, flags); + priv->cur_rx = 0; priv->dirty_rx = 0; priv->dirty_tx = 0; -- cgit v1.2.3 From 121b78e679ee3ffab780115e260b2775d0cc1f73 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Thu, 26 May 2016 08:41:08 +0300 Subject: drm/amdkfd: unbind only existing processes When unbinding a process from a device (initiated by amd_iommu_v2), the driver needs to make sure that process still exists in the process table. There is a possibility that amdkfd's own notifier handler - kfd_process_notifier_release() - was called before the unbind function and it already removed the process from the process table. v2: Because there can be only one process with the specified pasid, and because *p can't be NULL inside the hash_for_each_rcu macro, it is more reasonable to just put the whole code inside the if statement that compares the pasid value. That way, when we exit hash_for_each_rcu, we simply exit the function as well. Signed-off-by: Oded Gabbay CC: Stable --- drivers/gpu/drm/amd/amdkfd/kfd_process.c | 60 +++++++++++++++++++------------- 1 file changed, 35 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process.c b/drivers/gpu/drm/amd/amdkfd/kfd_process.c index ac005796b71c..a64bc619ed82 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process.c @@ -404,42 +404,52 @@ void kfd_unbind_process_from_device(struct kfd_dev *dev, unsigned int pasid) idx = srcu_read_lock(&kfd_processes_srcu); + /* + * Look for the process that matches the pasid. If there is no such + * process, we either released it in amdkfd's own notifier, or there + * is a bug. Unfortunately, there is no way to tell... + */ hash_for_each_rcu(kfd_processes_table, i, p, kfd_processes) - if (p->pasid == pasid) - break; + if (p->pasid == pasid) { - srcu_read_unlock(&kfd_processes_srcu, idx); + srcu_read_unlock(&kfd_processes_srcu, idx); - BUG_ON(p->pasid != pasid); + pr_debug("Unbinding process %d from IOMMU\n", pasid); - mutex_lock(&p->mutex); + mutex_lock(&p->mutex); - if ((dev->dbgmgr) && (dev->dbgmgr->pasid == p->pasid)) - kfd_dbgmgr_destroy(dev->dbgmgr); + if ((dev->dbgmgr) && (dev->dbgmgr->pasid == p->pasid)) + kfd_dbgmgr_destroy(dev->dbgmgr); - pqm_uninit(&p->pqm); + pqm_uninit(&p->pqm); - pdd = kfd_get_process_device_data(dev, p); + pdd = kfd_get_process_device_data(dev, p); - if (!pdd) { - mutex_unlock(&p->mutex); - return; - } + if (!pdd) { + mutex_unlock(&p->mutex); + return; + } - if (pdd->reset_wavefronts) { - dbgdev_wave_reset_wavefronts(pdd->dev, p); - pdd->reset_wavefronts = false; - } + if (pdd->reset_wavefronts) { + dbgdev_wave_reset_wavefronts(pdd->dev, p); + pdd->reset_wavefronts = false; + } - /* - * Just mark pdd as unbound, because we still need it to call - * amd_iommu_unbind_pasid() in when the process exits. - * We don't call amd_iommu_unbind_pasid() here - * because the IOMMU called us. - */ - pdd->bound = false; + /* + * Just mark pdd as unbound, because we still need it + * to call amd_iommu_unbind_pasid() in when the + * process exits. + * We don't call amd_iommu_unbind_pasid() here + * because the IOMMU called us. + */ + pdd->bound = false; - mutex_unlock(&p->mutex); + mutex_unlock(&p->mutex); + + return; + } + + srcu_read_unlock(&kfd_processes_srcu, idx); } struct kfd_process_device *kfd_get_first_process_device_data(struct kfd_process *p) -- cgit v1.2.3 From bc4755a4bd1845ef6e88ac8c62f12e05bb530256 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Thu, 26 May 2016 08:41:48 +0300 Subject: drm/amdkfd: destroy dbgmgr in notifier release amdkfd need to destroy the debug manager in case amdkfd's notifier function is called before the unbind function, because in that case, the unbind function will exit without destroying debug manager. Signed-off-by: Oded Gabbay CC: Stable --- drivers/gpu/drm/amd/amdkfd/kfd_process.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process.c b/drivers/gpu/drm/amd/amdkfd/kfd_process.c index a64bc619ed82..7708d90b9da9 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process.c @@ -242,13 +242,19 @@ static void kfd_process_notifier_release(struct mmu_notifier *mn, pqm_uninit(&p->pqm); /* Iterate over all process device data structure and check - * if we should reset all wavefronts */ - list_for_each_entry(pdd, &p->per_device_data, per_device_list) + * if we should delete debug managers and reset all wavefronts + */ + list_for_each_entry(pdd, &p->per_device_data, per_device_list) { + if ((pdd->dev->dbgmgr) && + (pdd->dev->dbgmgr->pasid == p->pasid)) + kfd_dbgmgr_destroy(pdd->dev->dbgmgr); + if (pdd->reset_wavefronts) { pr_warn("amdkfd: Resetting all wave fronts\n"); dbgdev_wave_reset_wavefronts(pdd->dev, p); pdd->reset_wavefronts = false; } + } mutex_unlock(&p->mutex); -- cgit v1.2.3 From 0fbbbf8b599ff840ff1a3c0cc00dd67ba8a52c9c Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Sun, 29 May 2016 08:21:53 +0300 Subject: drm/amdkfd: print once about mem_banks truncation This print can really spam the kernel log in case we are truncating mem_banks, so just print this info once. It should also not be classified as warning. Signed-off-by: Oded Gabbay --- drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c index 74909e72a009..884c96f50c3d 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c @@ -666,7 +666,7 @@ static ssize_t node_show(struct kobject *kobj, struct attribute *attr, dev->node_props.simd_count); if (dev->mem_bank_count < dev->node_props.mem_banks_count) { - pr_warn("kfd: mem_banks_count truncated from %d to %d\n", + pr_info_once("kfd: mem_banks_count truncated from %d to %d\n", dev->node_props.mem_banks_count, dev->mem_bank_count); sysfs_show_32bit_prop(buffer, "mem_banks_count", -- cgit v1.2.3 From 31b2a32f708bb33b3f35b03ce3d2cb31f7d1e684 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 18 May 2016 15:28:06 +0300 Subject: phy: ti-pipe3: Program the DPLL even if it was already locked If bootloader has set a wrong DPLL then we must trash those values and re-program it anyways. This fixes USB3 devices not being enumerated on beagle-x15 if usb was started in u-boot. We don't re-program SATA DPLL if it is locked as it was causing SATA failures if device was hotpluged after boot. Reported-by: Robert Nelson Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-ti-pipe3.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index 0a477d24cf76..bf46844dc387 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -293,11 +293,18 @@ static int ti_pipe3_init(struct phy *x) ret = ti_pipe3_dpll_wait_lock(phy); } - /* Program the DPLL only if not locked */ + /* SATA has issues if re-programmed when locked */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); - if (!(val & PLL_LOCK)) - if (ti_pipe3_dpll_program(phy)) - return -EINVAL; + if ((val & PLL_LOCK) && of_device_is_compatible(phy->dev->of_node, + "ti,phy-pipe3-sata")) + return ret; + + /* Program the DPLL */ + ret = ti_pipe3_dpll_program(phy); + if (ret) { + ti_pipe3_disable_clocks(phy); + return -EINVAL; + } return ret; } -- cgit v1.2.3 From c75343972b79ef5bd44c498a63b326e37470bbfc Mon Sep 17 00:00:00 2001 From: Dennis Chen Date: Tue, 31 May 2016 11:23:44 +0100 Subject: efi/arm: Fix the format of EFI debug messages When both EFI and memblock debugging is enabled on the kernel command line: 'efi=debug memblock=debug' .. the debug messages for early_con look the following way: [ 0.000000] efi: 0x0000e1050000-0x0000e105ffff [Memory Mapped I/O |RUN| | | | | | | | | | |UC] [ 0.000000] efi: 0x0000e1300000-0x0000e1300fff [Memory Mapped I/O |RUN| | | | | | | | | | |UC] [ 0.000000] efi: 0x0000e8200000-0x0000e827ffff [Memory Mapped I/O |RUN| | | | | | | | | | |UC] [ 0.000000] efi: 0x008000000000-0x008001e7ffff [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] [ 0.000000] memblock_add: [0x00008000000000-0x00008001e7ffff] flags 0x0 early_init_dt_add_memory_arch+0x54/0x5c [ 0.000000] * ... Note the misplaced '*' line, which happened because the memblock debug message was printed while the EFI debug message was still being constructed.. This patch fixes the output to be the expected: [ 0.000000] efi: 0x0000e1050000-0x0000e105ffff [Memory Mapped I/O |RUN| | | | | | | | | | |UC] [ 0.000000] efi: 0x0000e1300000-0x0000e1300fff [Memory Mapped I/O |RUN| | | | | | | | | | |UC] [ 0.000000] efi: 0x0000e8200000-0x0000e827ffff [Memory Mapped I/O |RUN| | | | | | | | | | |UC] [ 0.000000] efi: 0x008000000000-0x008001e7ffff [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC]* [ 0.000000] memblock_add: [0x00008000000000-0x00008001e7ffff] flags 0x0 early_init_dt_add_memory_arch+0x54/0x5c ... Note how the '*' is now in the proper EFI debug message line. Signed-off-by: Dennis Chen Signed-off-by: Matt Fleming Acked-by: Mark Rutland Cc: Ard Biesheuvel Cc: Catalin Marinas Cc: Dan Williams Cc: Linus Torvalds Cc: Mark Salter Cc: Peter Zijlstra Cc: Steve Capper Cc: Steve McIntyre Cc: Steven Rostedt Cc: Thomas Gleixner Cc: Will Deacon Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1464690224-4503-3-git-send-email-matt@codeblueprint.co.uk [ Made the changelog more readable. ] Signed-off-by: Ingo Molnar --- drivers/firmware/efi/arm-init.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/efi/arm-init.c b/drivers/firmware/efi/arm-init.c index a850cbc48d8d..c49d50e68aee 100644 --- a/drivers/firmware/efi/arm-init.c +++ b/drivers/firmware/efi/arm-init.c @@ -174,6 +174,7 @@ static __init void reserve_regions(void) { efi_memory_desc_t *md; u64 paddr, npages, size; + int resv; if (efi_enabled(EFI_DBG)) pr_info("Processing EFI memory map:\n"); @@ -190,12 +191,14 @@ static __init void reserve_regions(void) paddr = md->phys_addr; npages = md->num_pages; + resv = is_reserve_region(md); if (efi_enabled(EFI_DBG)) { char buf[64]; - pr_info(" 0x%012llx-0x%012llx %s", + pr_info(" 0x%012llx-0x%012llx %s%s\n", paddr, paddr + (npages << EFI_PAGE_SHIFT) - 1, - efi_md_typeattr_format(buf, sizeof(buf), md)); + efi_md_typeattr_format(buf, sizeof(buf), md), + resv ? "*" : ""); } memrange_efi_to_native(&paddr, &npages); @@ -204,14 +207,9 @@ static __init void reserve_regions(void) if (is_normal_ram(md)) early_init_dt_add_memory_arch(paddr, size); - if (is_reserve_region(md)) { + if (resv) memblock_mark_nomap(paddr, size); - if (efi_enabled(EFI_DBG)) - pr_cont("*"); - } - if (efi_enabled(EFI_DBG)) - pr_cont("\n"); } set_bit(EFI_MEMMAP, &efi.flags); -- cgit v1.2.3 From c7103f650a11328f28b9fa1c95027db331b7774b Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Tue, 31 May 2016 11:50:28 -0700 Subject: EDAC, sb_edac: Fix rank lookup on Broadwell Broadwell made a small change to the rank target register moving the target rank ID field up from bits 16:19 to bits 20:23. Also found that the offset field grew by one bit in the IVY_BRIDGE to HASWELL transition, so fix the RIR_OFFSET() macro too. Signed-off-by: Tony Luck Cc: stable@vger.kernel.org # v3.19+ Cc: Aristeu Rozanski Cc: Mauro Carvalho Chehab Cc: linux-edac Link: http://lkml.kernel.org/r/2943fb819b1f7e396681165db9c12bb3df0e0b16.1464735623.git.tony.luck@intel.com Signed-off-by: Borislav Petkov --- drivers/edac/sb_edac.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index b4d0bf6534cf..ace662e8a7a8 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -239,8 +239,11 @@ static const u32 rir_offset[MAX_RIR_RANGES][MAX_RIR_WAY] = { { 0x1a0, 0x1a4, 0x1a8, 0x1ac, 0x1b0, 0x1b4, 0x1b8, 0x1bc }, }; -#define RIR_RNK_TGT(reg) GET_BITFIELD(reg, 16, 19) -#define RIR_OFFSET(reg) GET_BITFIELD(reg, 2, 14) +#define RIR_RNK_TGT(type, reg) (((type) == BROADWELL) ? \ + GET_BITFIELD(reg, 20, 23) : GET_BITFIELD(reg, 16, 19)) + +#define RIR_OFFSET(type, reg) (((type) == HASWELL || (type) == BROADWELL) ? \ + GET_BITFIELD(reg, 2, 15) : GET_BITFIELD(reg, 2, 14)) /* Device 16, functions 2-7 */ @@ -1894,14 +1897,14 @@ static void get_memory_layout(const struct mem_ctl_info *mci) pci_read_config_dword(pvt->pci_tad[i], rir_offset[j][k], ®); - tmp_mb = RIR_OFFSET(reg) << 6; + tmp_mb = RIR_OFFSET(pvt->info.type, reg) << 6; gb = div_u64_rem(tmp_mb, 1024, &mb); edac_dbg(0, "CH#%d RIR#%d INTL#%d, offset %u.%03u GB (0x%016Lx), tgt: %d, reg=0x%08x\n", i, j, k, gb, (mb*1000)/1024, ((u64)tmp_mb) << 20L, - (u32)RIR_RNK_TGT(reg), + (u32)RIR_RNK_TGT(pvt->info.type, reg), reg); } } @@ -2234,7 +2237,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci, pci_read_config_dword(pvt->pci_tad[ch_add + base_ch], rir_offset[n_rir][idx], ®); - *rank = RIR_RNK_TGT(reg); + *rank = RIR_RNK_TGT(pvt->info.type, reg); edac_dbg(0, "RIR#%d: channel address 0x%08Lx < 0x%08Lx, RIR interleave %d, index %d\n", n_rir, -- cgit v1.2.3 From 31143e2933d1675c4c1ba6ce125cdd95870edd85 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Thu, 2 Jun 2016 02:00:27 -0700 Subject: brcmfmac: add eth_type_trans back for PCIe full dongle A regression was introduced in commit 9c349892ccc9 ("brcmfmac: revise handling events in receive path") which moves eth_type_trans() call to brcmf_rx_frame(). Msgbuf layer doesn't use brcmf_rx_frame() but invokes brcmf_netif_rx() directly. In such case the Ethernet header was not stripped out resulting in null pointer dereference in the networking stack. BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [] enqueue_to_backlog+0x56/0x260 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: fuse ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype [...] rtsx_pci scsi_mod usbcore usb_common i8042 serio nvme nvme_core CPU: 7 PID: 1340 Comm: irq/136-brcmf_p Not tainted 4.7.0-rc1-mainline #1 Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 01.02.00 04/07/2016 task: ffff8804a0c5bd00 ti: ffff88049e124000 task.ti: ffff88049e124000 RIP: 0010:[] [] enqueue_to_backlog+0x56/0x260 RSP: 0018:ffff88049e127ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8804bddd7c40 RCX: 000000000000002f RDX: 0000000000000000 RSI: 0000000000000007 RDI: ffff8804bddd7d4c RBP: ffff88049e127ce8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8804bddd12c0 R11: 000000000000149e R12: 0000000000017c40 R13: ffff88049e127d08 R14: ffff8804a9bd6d00 R15: ffff8804bddd7d4c FS: 0000000000000000(0000) GS:ffff8804bddc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000048 CR3: 0000000001806000 CR4: 00000000003406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8804bdddad00 ffff8804ad089e00 0000000000000000 0000000000000282 0000000000000000 ffff8804a9bd6d00 ffff8804a1b27e00 ffff8804a9bd6d00 ffff88002ee88000 ffff88049e127d28 ffffffff814c3f3b ffffffff81311fc3 Call Trace: [] netif_rx_internal+0x4b/0x170 [] ? swiotlb_tbl_unmap_single+0xf3/0x120 [] netif_rx_ni+0x27/0xc0 [] brcmf_netif_rx+0x49/0x70 [brcmfmac] [] brcmf_msgbuf_process_rx+0x2b4/0x570 [brcmfmac] [] ? __xen_set_pgd_hyper+0x57/0xd0 [] ? irq_forced_thread_fn+0x70/0x70 [] brcmf_proto_msgbuf_rx_trigger+0x31/0xe0 [brcmfmac] [] brcmf_pcie_isr_thread+0x7f/0x110 [brcmfmac] [] irq_thread_fn+0x20/0x50 [] irq_thread+0x12d/0x1c0 [] ? __schedule+0x2f5/0x7a0 [] ? wake_threads_waitq+0x30/0x30 [] ? irq_thread_dtor+0xb0/0xb0 [] kthread+0xd8/0xf0 [] ret_from_fork+0x1f/0x40 [] ? kthread_worker_fn+0x170/0x170 Code: 1c f5 60 9a 8e 81 9c 58 0f 1f 44 00 00 48 89 45 d0 fa 66 0f 1f 44 00 00 4c 8d bb 0c 01 00 00 4c 89 ff e8 5e 08 11 00 49 8b 56 20 <48> 8b 52 48 83 e2 01 74 10 8b 8b 08 01 00 00 8b 15 59 c5 42 00 RIP [] enqueue_to_backlog+0x56/0x260 RSP CR2: 0000000000000048 Fixes: 9c349892ccc9 ("brcmfmac: revise handling events in receive path") Reported-by: Rafal Milecki Reported-by: Grey Christoforo Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend Van Spriel Reviewed-by: Hante Meuleman Signed-off-by: Franky Lin [arend@broadcom.com: rephrased the commit message] Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c index 68f1ce02f4bf..2b9a2bc429d6 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c @@ -1157,6 +1157,8 @@ brcmf_msgbuf_process_rx_complete(struct brcmf_msgbuf *msgbuf, void *buf) brcmu_pkt_buf_free_skb(skb); return; } + + skb->protocol = eth_type_trans(skb, ifp->ndev); brcmf_netif_rx(ifp, skb); } -- cgit v1.2.3 From fbedcaf43fba35677c01a4ae51e6f79edf4049ba Mon Sep 17 00:00:00 2001 From: Nicholas Krause Date: Thu, 19 May 2016 18:45:58 -0400 Subject: EDAC: Fix workqueues poll period resetting After the workqueue cleanup, we're registering workqueues based on the presence of an ->edac_check function. When that is the case, we're setting OP_RUNNING_POLL. But we forgot to check that in edac_mc_reset_delay_period(), leading to: BUG: unable to handle kernel paging request at 0000000000015d10 IP: [ .. ] queued_spin_lock_slowpath PGD 3ffcc8067 PUD 3ffc56067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: ... CPU: 1 PID: 2792 Comm: edactest Not tainted 4.6.0-dirty #1 Hardware name: HP ProLiant MicroServer, BIOS O41 10/01/2013 Stack: Call Trace: ? _raw_spin_lock_irqsave ? lock_timer_base.isra.34 ? del_timer ? try_to_grab_pending ? mod_delayed_work_on ? edac_mc_reset_delay_period ? edac_set_poll_msec ? param_attr_store ? module_attr_store ? kernfs_fop_write ? __vfs_write ? __vfs_read ? __alloc_fd ? vfs_write ? SyS_write ? entry_SYSCALL_64_fastpath Code: RIP [ .. ] queued_spin_lock_slowpath RSP <> CR2: 0000000000015d10 ---[ end trace 3f286bc71cca15d1 ]--- Kernel panic - not syncing: Fatal exception Fix it. Signed-off-by: Nicholas Krause Cc: # 4.5 Cc: Mauro Carvalho Chehab Cc: linux-edac Link: http://lkml.kernel.org/r/1463697958-13406-1-git-send-email-xerofoify@gmail.com [ Rewrite commit message. ] Signed-off-by: Borislav Petkov --- drivers/edac/edac_mc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 6aa256b0a1ed..c3ee3ad98a63 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -565,7 +565,8 @@ void edac_mc_reset_delay_period(unsigned long value) list_for_each(item, &mc_devices) { mci = list_entry(item, struct mem_ctl_info, link); - edac_mod_work(&mci->work, value); + if (mci->op_state == OP_RUNNING_POLL) + edac_mod_work(&mci->work, value); } mutex_unlock(&mem_ctls_mutex); } -- cgit v1.2.3 From 99543823357966ac938d9a310947e731b67338e6 Mon Sep 17 00:00:00 2001 From: Crestez Dan Leonard Date: Tue, 3 May 2016 15:27:09 +0300 Subject: iio: Fix error handling in iio_trigger_attach_poll_func When attaching a pollfunc iio_trigger_attach_poll_func will allocate a virtual irq and call the driver's set_trigger_state function. Fix error handling to undo previous steps if any fails. In particular this fixes handling errors from a driver's set_trigger_state function. When using triggered buffers a failure to enable the trigger used to make the buffer unusable. Signed-off-by: Crestez Dan Leonard Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-trigger.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c index ae2806aafb72..0c52dfe64977 100644 --- a/drivers/iio/industrialio-trigger.c +++ b/drivers/iio/industrialio-trigger.c @@ -210,22 +210,35 @@ static int iio_trigger_attach_poll_func(struct iio_trigger *trig, /* Prevent the module from being removed whilst attached to a trigger */ __module_get(pf->indio_dev->info->driver_module); + + /* Get irq number */ pf->irq = iio_trigger_get_irq(trig); + if (pf->irq < 0) + goto out_put_module; + + /* Request irq */ ret = request_threaded_irq(pf->irq, pf->h, pf->thread, pf->type, pf->name, pf); - if (ret < 0) { - module_put(pf->indio_dev->info->driver_module); - return ret; - } + if (ret < 0) + goto out_put_irq; + /* Enable trigger in driver */ if (trig->ops && trig->ops->set_trigger_state && notinuse) { ret = trig->ops->set_trigger_state(trig, true); if (ret < 0) - module_put(pf->indio_dev->info->driver_module); + goto out_free_irq; } return ret; + +out_free_irq: + free_irq(pf->irq, pf); +out_put_irq: + iio_trigger_put_irq(trig, pf->irq); +out_put_module: + module_put(pf->indio_dev->info->driver_module); + return ret; } static int iio_trigger_detach_poll_func(struct iio_trigger *trig, -- cgit v1.2.3 From 590b92a30242dd3f73de3d9a51d9924f1ab33e93 Mon Sep 17 00:00:00 2001 From: Yong Li Date: Thu, 5 May 2016 16:10:49 +0800 Subject: iio: light apds9960: Add the missing dev.parent Without this, the iio:deviceX is missing in the /sys/bus/i2c/devices/0-0039 Some userspace tools use this path to identify a specific instance of the device. Signed-off-by: Yong Li Reviewed-By: Matt Ranostay Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/light/apds9960.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iio/light/apds9960.c b/drivers/iio/light/apds9960.c index b4dbb3912977..651d57b8abbf 100644 --- a/drivers/iio/light/apds9960.c +++ b/drivers/iio/light/apds9960.c @@ -1011,6 +1011,7 @@ static int apds9960_probe(struct i2c_client *client, iio_device_attach_buffer(indio_dev, buffer); + indio_dev->dev.parent = &client->dev; indio_dev->info = &apds9960_info; indio_dev->name = APDS9960_DRV_NAME; indio_dev->channels = apds9960_channels; -- cgit v1.2.3 From 3993546646baf1dab5f5c4f7d9bb58f2046fd1c1 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 28 May 2016 23:02:50 +0300 Subject: of: irq: fix of_irq_get[_byname]() kernel-doc The kernel-doc for the of_irq_get[_byname]() is clearly inadequate in describing the return values -- of_irq_get_byname() is documented better than of_irq_get() but it still doesn't mention that 0 is returned iff irq_create_of_mapping() fails (it doesn't return an error code in this case). Document all possible return value variants, making the writing of the word "IRQ" consistent, while at it... Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq") Fixes: ad69674e73a1 ("of/irq: do irq resolution in platform_get_irq_byname()") Signed-off-by: Sergei Shtylyov CC: stable@vger.kernel.org Signed-off-by: Rob Herring --- drivers/of/irq.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/of/irq.c b/drivers/of/irq.c index e7bfc175b8e1..6ec743faabe8 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -386,13 +386,13 @@ int of_irq_to_resource(struct device_node *dev, int index, struct resource *r) EXPORT_SYMBOL_GPL(of_irq_to_resource); /** - * of_irq_get - Decode a node's IRQ and return it as a Linux irq number + * of_irq_get - Decode a node's IRQ and return it as a Linux IRQ number * @dev: pointer to device tree node - * @index: zero-based index of the irq - * - * Returns Linux irq number on success, or -EPROBE_DEFER if the irq domain - * is not yet created. + * @index: zero-based index of the IRQ * + * Returns Linux IRQ number on success, or 0 on the IRQ mapping failure, or + * -EPROBE_DEFER if the IRQ domain is not yet created, or error code in case + * of any other failure. */ int of_irq_get(struct device_node *dev, int index) { @@ -413,12 +413,13 @@ int of_irq_get(struct device_node *dev, int index) EXPORT_SYMBOL_GPL(of_irq_get); /** - * of_irq_get_byname - Decode a node's IRQ and return it as a Linux irq number + * of_irq_get_byname - Decode a node's IRQ and return it as a Linux IRQ number * @dev: pointer to device tree node - * @name: irq name + * @name: IRQ name * - * Returns Linux irq number on success, or -EPROBE_DEFER if the irq domain - * is not yet created, or error code in case of any other failure. + * Returns Linux IRQ number on success, or 0 on the IRQ mapping failure, or + * -EPROBE_DEFER if the IRQ domain is not yet created, or error code in case + * of any other failure. */ int of_irq_get_byname(struct device_node *dev, const char *name) { -- cgit v1.2.3 From 7d482813bb3518cbfeae1b987a5afd76a88c7eb3 Mon Sep 17 00:00:00 2001 From: Jaewon Date: Wed, 25 May 2016 13:29:50 +0900 Subject: drivers: of: of_reserved_mem: fixup the CMA alignment not to affect dma-coherent There was an alignment mismatch issue for CMA and it was fixed by commit 1cc8e3458b51 ("drivers: of: of_reserved_mem: fixup the alignment with CMA setup"). However the way of the commit considers not only dma-contiguous(CMA) but also dma-coherent which has no that requirement. This patch checks more to distinguish dma-contiguous(CMA) from dma-coherent. Signed-off-by: Jaewon Kim Acked-by: Jason Liu Acked-by: Marek Szyprowski [robh: remove erroneous opening bracket] Signed-off-by: Rob Herring --- drivers/of/of_reserved_mem.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c index ed01c0172e4a..ed7e681efcf0 100644 --- a/drivers/of/of_reserved_mem.c +++ b/drivers/of/of_reserved_mem.c @@ -127,7 +127,10 @@ static int __init __reserved_mem_alloc_size(unsigned long node, } /* Need adjust the alignment to satisfy the CMA requirement */ - if (IS_ENABLED(CONFIG_CMA) && of_flat_dt_is_compatible(node, "shared-dma-pool")) + if (IS_ENABLED(CONFIG_CMA) + && of_flat_dt_is_compatible(node, "shared-dma-pool") + && of_get_flat_dt_prop(node, "reusable", NULL) + && !of_get_flat_dt_prop(node, "no-map", NULL)) align = max(align, (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); prop = of_get_flat_dt_prop(node, "alloc-ranges", &len); -- cgit v1.2.3 From 94bef000f1d4aa111f4ddda1482cf3b30ad069ce Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Sun, 29 May 2016 19:52:02 -0700 Subject: iio: hudmidity: hdc100x: fix incorrect shifting and scaling Shifting sensor data to the right 2 bits was incorrect and caused the scaling values + offsets to be invalid. Reported-by: Alison Schofield Signed-off-by: Matt Ranostay Tested-by: Alison Schofield Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/hdc100x.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c index 30709838dcdc..a03832a5fc95 100644 --- a/drivers/iio/humidity/hdc100x.c +++ b/drivers/iio/humidity/hdc100x.c @@ -164,14 +164,14 @@ static int hdc100x_get_measurement(struct hdc100x_data *data, dev_err(&client->dev, "cannot read high byte measurement"); return ret; } - val = ret << 6; + val = ret << 8; ret = i2c_smbus_read_byte(client); if (ret < 0) { dev_err(&client->dev, "cannot read low byte measurement"); return ret; } - val |= ret >> 2; + val |= ret; return val; } @@ -212,17 +212,17 @@ static int hdc100x_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_SCALE: if (chan->type == IIO_TEMP) { *val = 165000; - *val2 = 65536 >> 2; + *val2 = 65536; return IIO_VAL_FRACTIONAL; } else { - *val = 0; - *val2 = 10000; - return IIO_VAL_INT_PLUS_MICRO; + *val = 100; + *val2 = 65536; + return IIO_VAL_FRACTIONAL; } break; case IIO_CHAN_INFO_OFFSET: - *val = -3971; - *val2 = 879096; + *val = -15887; + *val2 = 515151; return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; -- cgit v1.2.3 From aaaab56dba9af4fe75461e0ee13231c1a6ea174d Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 31 May 2016 09:38:56 +1000 Subject: of: silence warnings due to max() usage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit pageblock_order can be (at least) an unsigned int or an unsigned long depending on the kernel config and architecture, so use max_t(unsigned long ...) when comparing it. fixes these warnings: In file included from include/linux/list.h:8:0, from include/linux/kobject.h:20, from include/linux/of.h:21, from drivers/of/of_reserved_mem.c:17: drivers/of/of_reserved_mem.c: In function ‘__reserved_mem_alloc_size’: include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); \ ^ include/linux/kernel.h:747:9: note: in definition of macro ‘max’ typeof(y) _max2 = (y); \ ^ drivers/of/of_reserved_mem.c:131:48: note: in expansion of macro ‘max’ align = max(align, (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_ord ^ include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); \ ^ include/linux/kernel.h:747:21: note: in definition of macro ‘max’ typeof(y) _max2 = (y); \ ^ drivers/of/of_reserved_mem.c:131:48: note: in expansion of macro ‘max’ align = max(align, (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_ord ^ Fixes: 1cc8e3458b51 ("drivers: of: of_reserved_mem: fixup the alignment with CMA setup") Signed-off-by: Stephen Rothwell Signed-off-by: Rob Herring --- drivers/of/of_reserved_mem.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c index ed7e681efcf0..216648233874 100644 --- a/drivers/of/of_reserved_mem.c +++ b/drivers/of/of_reserved_mem.c @@ -130,8 +130,12 @@ static int __init __reserved_mem_alloc_size(unsigned long node, if (IS_ENABLED(CONFIG_CMA) && of_flat_dt_is_compatible(node, "shared-dma-pool") && of_get_flat_dt_prop(node, "reusable", NULL) - && !of_get_flat_dt_prop(node, "no-map", NULL)) - align = max(align, (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); + && !of_get_flat_dt_prop(node, "no-map", NULL)) { + unsigned long order = + max_t(unsigned long, MAX_ORDER - 1, pageblock_order); + + align = max(align, (phys_addr_t)PAGE_SIZE << order); + } prop = of_get_flat_dt_prop(node, "alloc-ranges", &len); if (prop) { -- cgit v1.2.3 From 62d0e71df063101e4551327bd9fa9aaa3535c86b Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Fri, 3 Jun 2016 08:54:18 +0800 Subject: clk: rockchip: release io resource when failing to init clk on rk3399 We should call iounmap to relase reg_base since it's not going to be used any more if failing to init clk. This was missing on the newly added rk3399 clock tree. Signed-off-by: Shawn Lin Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 9f86bfef70f7..8059a8d3ea36 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -1510,6 +1510,7 @@ static void __init rk3399_clk_init(struct device_node *np) ctx = rockchip_clk_init(np, reg_base, CLK_NR_CLKS); if (IS_ERR(ctx)) { pr_err("%s: rockchip clk init failed\n", __func__); + iounmap(reg_base); return; } @@ -1555,6 +1556,7 @@ static void __init rk3399_pmu_clk_init(struct device_node *np) ctx = rockchip_clk_init(np, reg_base, CLKPMU_NR_CLKS); if (IS_ERR(ctx)) { pr_err("%s: rockchip pmu clk init failed\n", __func__); + iounmap(reg_base); return; } -- cgit v1.2.3 From 665f05e0b836d46b22f0b712eb76d8b7f69a5ea0 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 2 Jun 2016 10:58:08 -0700 Subject: EDAC, sb_edac: Readd accidentally dropped Broadwell-D support In commit 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") we switched from using PCI ids to determine which platform we are running on to using CPU model instead. I forgot that Broadwell-DE has its own distinct model number different from Broadwell-EP or -EX. Fixing this isn't just adding a line to the array of cpuids - the exising code assumed a 1:1 mapping between entries in that array and the "enum type" values. Added the type to pci_id_table structure to remove this dependency and allows two Broadwell cpu models. Signed-off-by: Tony Luck Cc: Aristeu Rozanski Cc: Dave Hansen Cc: Mauro Carvalho Chehab Cc: linux-edac Fixes: 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") Link: http://lkml.kernel.org/r/b3cffe40dec6dfe0235a5d52a504f0ba86a07ce7.1464902605.git.tony.luck@intel.com Signed-off-by: Borislav Petkov --- drivers/edac/sb_edac.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index ace662e8a7a8..6744d88bdea8 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -329,6 +329,7 @@ struct pci_id_descr { struct pci_id_table { const struct pci_id_descr *descr; int n_devs; + enum type type; }; struct sbridge_dev { @@ -397,9 +398,14 @@ static const struct pci_id_descr pci_dev_descr_sbridge[] = { { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_BR, 0) }, }; -#define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) } +#define PCI_ID_TABLE_ENTRY(A, T) { \ + .descr = A, \ + .n_devs = ARRAY_SIZE(A), \ + .type = T \ +} + static const struct pci_id_table pci_dev_descr_sbridge_table[] = { - PCI_ID_TABLE_ENTRY(pci_dev_descr_sbridge), + PCI_ID_TABLE_ENTRY(pci_dev_descr_sbridge, SANDY_BRIDGE), {0,} /* 0 terminated list. */ }; @@ -466,7 +472,7 @@ static const struct pci_id_descr pci_dev_descr_ibridge[] = { }; static const struct pci_id_table pci_dev_descr_ibridge_table[] = { - PCI_ID_TABLE_ENTRY(pci_dev_descr_ibridge), + PCI_ID_TABLE_ENTRY(pci_dev_descr_ibridge, IVY_BRIDGE), {0,} /* 0 terminated list. */ }; @@ -539,7 +545,7 @@ static const struct pci_id_descr pci_dev_descr_haswell[] = { }; static const struct pci_id_table pci_dev_descr_haswell_table[] = { - PCI_ID_TABLE_ENTRY(pci_dev_descr_haswell), + PCI_ID_TABLE_ENTRY(pci_dev_descr_haswell, HASWELL), {0,} /* 0 terminated list. */ }; @@ -583,7 +589,7 @@ static const struct pci_id_descr pci_dev_descr_knl[] = { }; static const struct pci_id_table pci_dev_descr_knl_table[] = { - PCI_ID_TABLE_ENTRY(pci_dev_descr_knl), + PCI_ID_TABLE_ENTRY(pci_dev_descr_knl, KNIGHTS_LANDING), {0,} }; @@ -651,7 +657,7 @@ static const struct pci_id_descr pci_dev_descr_broadwell[] = { }; static const struct pci_id_table pci_dev_descr_broadwell_table[] = { - PCI_ID_TABLE_ENTRY(pci_dev_descr_broadwell), + PCI_ID_TABLE_ENTRY(pci_dev_descr_broadwell, BROADWELL), {0,} /* 0 terminated list. */ }; @@ -3360,12 +3366,12 @@ fail0: #define ICPU(model, table) \ { X86_VENDOR_INTEL, 6, model, 0, (unsigned long)&table } -/* Order here must match "enum type" */ static const struct x86_cpu_id sbridge_cpuids[] = { ICPU(0x2d, pci_dev_descr_sbridge_table), /* SANDY_BRIDGE */ ICPU(0x3e, pci_dev_descr_ibridge_table), /* IVY_BRIDGE */ ICPU(0x3f, pci_dev_descr_haswell_table), /* HASWELL */ ICPU(0x4f, pci_dev_descr_broadwell_table), /* BROADWELL */ + ICPU(0x56, pci_dev_descr_broadwell_table), /* BROADWELL-DE */ ICPU(0x57, pci_dev_descr_knl_table), /* KNIGHTS_LANDING */ { } }; @@ -3401,7 +3407,7 @@ static int sbridge_probe(const struct x86_cpu_id *id) mc, mc + 1, num_mc); sbridge_dev->mc = mc++; - rc = sbridge_register_mci(sbridge_dev, id - sbridge_cpuids); + rc = sbridge_register_mci(sbridge_dev, ptable->type); if (unlikely(rc < 0)) goto fail1; } -- cgit v1.2.3 From 9c8b0778e48e4bbdb77121c6c1b7dd48e5182e67 Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Thu, 2 Jun 2016 17:36:28 +0800 Subject: gianfar: fix the last transmit buffer descriptor When the transmit hardware timestamping is enabled, an additional TxBD would be added and would be set as the last TxBD with TXBD_LAST and TXBD_INTERRUPT. However this has been broken by a patch recently. This made the software couldn't get transmit hardware timestamps and resulted in call trace. So, this patch is to fix this issue. Fixes: 48963b4492e9 ("gianfar: Remove redundant ops for do_tstamp from xmit()") Signed-off-by: Yangbo Lu Reviewed-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 7615e0668acb..2e6785b6e8be 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -2440,7 +2440,8 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_queue->tx_ring_size); if (likely(!nr_frags)) { - lstatus |= BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT); + if (likely(!do_tstamp)) + lstatus |= BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT); } else { u32 lstatus_start = lstatus; -- cgit v1.2.3 From 8478b6cdc10e8a7735deeb9d9e46ad5b157c84d0 Mon Sep 17 00:00:00 2001 From: Ivan Khoronzhuk Date: Thu, 2 Jun 2016 16:14:52 +0300 Subject: net: ethernet: ti: cpsw: fix rx-usecs interrupt pacing consistency The rx-usecs shouldn't be changed while interface down/up. Currently, for instance, if it's set to 100us, after interface down/up it's 500us. It's a hidden bug that can lead to lavish interrupt pacing time increasing while "down/up" up to max value. Steps to reproduce: - set rx-usecs to be 100us - down/up interface - read new unexpected rx-usecs Signed-off-by: Ivan Khoronzhuk Reviewed-by: Grygorii Strashko Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 4b08a2f52b3e..e6bb0ecb12c7 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1339,7 +1339,7 @@ static int cpsw_ndo_open(struct net_device *ndev) if (priv->coal_intvl != 0) { struct ethtool_coalesce coal; - coal.rx_coalesce_usecs = (priv->coal_intvl << 4); + coal.rx_coalesce_usecs = priv->coal_intvl; cpsw_set_coalesce(ndev, &coal); } -- cgit v1.2.3 From 207bdf1844286d2ba94523d30528f82aaf33d52b Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 3 Jun 2016 10:17:06 +0200 Subject: net-next: mediatek: use mdiobus_free() in favour of kfree() The driver currently uses kfree() to clear the mii_bus. This is not the correct way to clear the memory and mdiobus_free() should be used instead. This patch fixes the two instances where this happens in the driver. Reviewed-by: Andrew Lunn Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index c984462fad2a..28f169f489da 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -280,7 +280,7 @@ static int mtk_mdio_init(struct mtk_eth *eth) return 0; err_free_bus: - kfree(eth->mii_bus); + mdiobus_free(eth->mii_bus); err_put_node: of_node_put(mii_np); @@ -295,7 +295,7 @@ static void mtk_mdio_cleanup(struct mtk_eth *eth) mdiobus_unregister(eth->mii_bus); of_node_put(eth->mii_bus->dev.of_node); - kfree(eth->mii_bus); + mdiobus_free(eth->mii_bus); } static inline void mtk_irq_disable(struct mtk_eth *eth, u32 mask) -- cgit v1.2.3 From 08ef55c6f257acf3bdc6940813f80e8f0f5d90ec Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 3 Jun 2016 10:17:07 +0200 Subject: net-next: mediatek: fix gigabit and flow control advertisement The current code will not setup the PHYs advertisement features correctly. Fix this and properly advertise Gigabit features and properly handle asymmetric pause frames. Signed-off-by: Sean Wang Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 30 +++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 28f169f489da..b0652f6182f4 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -133,6 +133,8 @@ static int mtk_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg) static void mtk_phy_link_adjust(struct net_device *dev) { struct mtk_mac *mac = netdev_priv(dev); + u16 lcl_adv = 0, rmt_adv = 0; + u8 flowctrl; u32 mcr = MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE | MAC_MCR_TX_EN | MAC_MCR_RX_EN | MAC_MCR_BACKOFF_EN | @@ -150,11 +152,30 @@ static void mtk_phy_link_adjust(struct net_device *dev) if (mac->phy_dev->link) mcr |= MAC_MCR_FORCE_LINK; - if (mac->phy_dev->duplex) + if (mac->phy_dev->duplex) { mcr |= MAC_MCR_FORCE_DPX; - if (mac->phy_dev->pause) - mcr |= MAC_MCR_FORCE_RX_FC | MAC_MCR_FORCE_TX_FC; + if (mac->phy_dev->pause) + rmt_adv = LPA_PAUSE_CAP; + if (mac->phy_dev->asym_pause) + rmt_adv |= LPA_PAUSE_ASYM; + + if (mac->phy_dev->advertising & ADVERTISED_Pause) + lcl_adv |= ADVERTISE_PAUSE_CAP; + if (mac->phy_dev->advertising & ADVERTISED_Asym_Pause) + lcl_adv |= ADVERTISE_PAUSE_ASYM; + + flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); + + if (flowctrl & FLOW_CTRL_TX) + mcr |= MAC_MCR_FORCE_TX_FC; + if (flowctrl & FLOW_CTRL_RX) + mcr |= MAC_MCR_FORCE_RX_FC; + + netif_dbg(mac->hw, link, dev, "rx pause %s, tx pause %s\n", + flowctrl & FLOW_CTRL_RX ? "enabled" : "disabled", + flowctrl & FLOW_CTRL_TX ? "enabled" : "disabled"); + } mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id)); @@ -236,7 +257,8 @@ static int mtk_phy_connect(struct mtk_mac *mac) mac->phy_dev->autoneg = AUTONEG_ENABLE; mac->phy_dev->speed = 0; mac->phy_dev->duplex = 0; - mac->phy_dev->supported &= PHY_BASIC_FEATURES; + mac->phy_dev->supported &= PHY_GBIT_FEATURES | SUPPORTED_Pause | + SUPPORTED_Asym_Pause; mac->phy_dev->advertising = mac->phy_dev->supported | ADVERTISED_Autoneg; phy_start_aneg(mac->phy_dev); -- cgit v1.2.3 From 0c72c50f6f93b0c3daa9ea35d89ab3a933c7b5a0 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 3 Jun 2016 10:17:08 +0200 Subject: net-next: mediatek: add fixed-phy support The MT7623 SoC has a builtin gigabit switch. If we want to use it, GMAC1 needs to be configured using a fixed link speed and flow control settings. The easiest way to do this is to used the fixed-phy driver, allowing us to reuse the existing mdio polling code to setup the MAC. Reviewed-by: Andrew Lunn Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index b0652f6182f4..231d28444a54 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -229,6 +229,9 @@ static int mtk_phy_connect(struct mtk_mac *mac) u32 val, ge_mode; np = of_parse_phandle(mac->of_node, "phy-handle", 0); + if (!np && of_phy_is_fixed_link(mac->of_node)) + if (!of_phy_register_fixed_link(mac->of_node)) + np = of_node_get(mac->of_node); if (!np) return -ENODEV; -- cgit v1.2.3 From 37920fce0fc10264410eb880d411968b7934b61d Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 3 Jun 2016 10:17:09 +0200 Subject: net-next: mediatek: properly handle RGMII modes If an external Gigabit PHY is connected to either of the MACs we need to be able to tell the PHY to use a delay. Not doing so will result in heavy packet loss and/or data corruption when using PHYs such as the IC+ IP1001. We tell the PHY which MII delay mode to use via the devictree. The ethernet driver needs to be adapted to handle all 3 rgmii-*id modes in the same way as normal rgmii when setting up the MAC. Reviewed-by: Andrew Lunn Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 231d28444a54..4763252bbf85 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -236,6 +236,9 @@ static int mtk_phy_connect(struct mtk_mac *mac) return -ENODEV; switch (of_get_phy_mode(np)) { + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: case PHY_INTERFACE_MODE_RGMII: ge_mode = 0; break; -- cgit v1.2.3 From 69a834c28fb514403eb91a4f0120da214a52e056 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 24 May 2016 18:29:38 -0400 Subject: drm/msm: deal with exhausted vmap space better Some, but not all, callers of obj->vmap() would check if return IS_ERR(). So let's actually return an error if vmap() fails. And fixup the call-sites that were not handling this properly. Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/adreno_gpu.c | 2 +- drivers/gpu/drm/msm/msm_fbdev.c | 4 ++++ drivers/gpu/drm/msm/msm_gem.c | 2 ++ drivers/gpu/drm/msm/msm_rd.c | 3 +++ drivers/gpu/drm/msm/msm_ringbuffer.c | 4 ++++ 5 files changed, 14 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index fbe304ee6c80..2aec27dbb5bb 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -408,7 +408,7 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev, } adreno_gpu->memptrs = msm_gem_vaddr(adreno_gpu->memptrs_bo); - if (!adreno_gpu->memptrs) { + if (IS_ERR(adreno_gpu->memptrs)) { dev_err(drm->dev, "could not vmap memptrs\n"); return -ENOMEM; } diff --git a/drivers/gpu/drm/msm/msm_fbdev.c b/drivers/gpu/drm/msm/msm_fbdev.c index d9759bf3482e..c6cf837c5193 100644 --- a/drivers/gpu/drm/msm/msm_fbdev.c +++ b/drivers/gpu/drm/msm/msm_fbdev.c @@ -159,6 +159,10 @@ static int msm_fbdev_create(struct drm_fb_helper *helper, dev->mode_config.fb_base = paddr; fbi->screen_base = msm_gem_vaddr_locked(fbdev->bo); + if (IS_ERR(fbi->screen_base)) { + ret = PTR_ERR(fbi->screen_base); + goto fail_unlock; + } fbi->screen_size = fbdev->bo->size; fbi->fix.smem_start = paddr; fbi->fix.smem_len = fbdev->bo->size; diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c index 7daf4054dd2b..69836f5685b1 100644 --- a/drivers/gpu/drm/msm/msm_gem.c +++ b/drivers/gpu/drm/msm/msm_gem.c @@ -398,6 +398,8 @@ void *msm_gem_vaddr_locked(struct drm_gem_object *obj) return ERR_CAST(pages); msm_obj->vaddr = vmap(pages, obj->size >> PAGE_SHIFT, VM_MAP, pgprot_writecombine(PAGE_KERNEL)); + if (msm_obj->vaddr == NULL) + return ERR_PTR(-ENOMEM); } return msm_obj->vaddr; } diff --git a/drivers/gpu/drm/msm/msm_rd.c b/drivers/gpu/drm/msm/msm_rd.c index b48f73ac6389..0857710c2ff2 100644 --- a/drivers/gpu/drm/msm/msm_rd.c +++ b/drivers/gpu/drm/msm/msm_rd.c @@ -312,6 +312,9 @@ void msm_rd_dump_submit(struct msm_gem_submit *submit) struct msm_gem_object *obj = submit->bos[idx].obj; const char *buf = msm_gem_vaddr_locked(&obj->base); + if (IS_ERR(buf)) + continue; + buf += iova - submit->bos[idx].iova; rd_write_section(rd, RD_GPUADDR, diff --git a/drivers/gpu/drm/msm/msm_ringbuffer.c b/drivers/gpu/drm/msm/msm_ringbuffer.c index 1f14b908b221..42f5359cf988 100644 --- a/drivers/gpu/drm/msm/msm_ringbuffer.c +++ b/drivers/gpu/drm/msm/msm_ringbuffer.c @@ -40,6 +40,10 @@ struct msm_ringbuffer *msm_ringbuffer_new(struct msm_gpu *gpu, int size) } ring->start = msm_gem_vaddr_locked(ring->bo); + if (IS_ERR(ring->start)) { + ret = PTR_ERR(ring->start); + goto fail; + } ring->end = ring->start + (size / 4); ring->cur = ring->start; -- cgit v1.2.3 From ba344afd667a6f1c6bf7c53e08fc16bd84fa4df7 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 24 May 2016 18:43:26 -0400 Subject: drm/msm: fix some crashes in submit fail path If submit fails, before fence is created or before submit is added to submit-list, then unitialized fields cause problems in the clean-up path. Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gem_submit.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c index b89ca5174863..635eff17c3d1 100644 --- a/drivers/gpu/drm/msm/msm_gem_submit.c +++ b/drivers/gpu/drm/msm/msm_gem_submit.c @@ -40,12 +40,14 @@ static struct msm_gem_submit *submit_create(struct drm_device *dev, submit->dev = dev; submit->gpu = gpu; + submit->fence = NULL; submit->pid = get_pid(task_pid(current)); /* initially, until copy_from_user() and bo lookup succeeds: */ submit->nr_bos = 0; submit->nr_cmds = 0; + INIT_LIST_HEAD(&submit->node); INIT_LIST_HEAD(&submit->bo_list); ww_acquire_init(&submit->ticket, &reservation_ww_class); -- cgit v1.2.3 From a9e26cab40ecfd4a0d718f22fa30db4dd1edbf60 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 1 Jun 2016 14:02:51 -0400 Subject: drm/msm: fix potential submit error path issue Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gem_submit.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c index 635eff17c3d1..eb4bb8b2f3a5 100644 --- a/drivers/gpu/drm/msm/msm_gem_submit.c +++ b/drivers/gpu/drm/msm/msm_gem_submit.c @@ -77,6 +77,11 @@ static int submit_lookup_objects(struct msm_gem_submit *submit, void __user *userptr = u64_to_user_ptr(args->bos + (i * sizeof(submit_bo))); + /* make sure we don't have garbage flags, in case we hit + * error path before flags is initialized: + */ + submit->bos[i].flags = 0; + ret = copy_from_user(&submit_bo, userptr, sizeof(submit_bo)); if (ret) { ret = -EFAULT; -- cgit v1.2.3 From a02cc9d3cc9f98905df214d4a57e5918473260ea Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Fri, 3 Jun 2016 15:32:18 +0200 Subject: bnx2x: allow adding VLANs while interface is down Since implementing VLAN filtering in commit 05cc5a39ddb74 ("bnx2x: add vlan filtering offload") bnx2x refuses to add a VLAN while the interface is down: # ip link add link enp3s0f0 enp3s0f0_10 type vlan id 10 RTNETLINK answers: Bad address and in dmesg (with bnx2x.debug=0x20): bnx2x: [bnx2x_vlan_rx_add_vid:12941(enp3s0f0)]Ignoring VLAN configuration the interface is down Other drivers have no problem with this. Fix this peculiar behavior in the following way: - Accept requests to add/kill VID regardless of the device state. Maintain the requested list of VIDs in the bp->vlan_reg list. - If the device is up, try to configure the VID list into the hardware. If we run out of VLAN credits or encounter a failure configuring an entry, fall back to accepting all VLANs. If we successfully configure all entries from the list, turn the fallback off. - Use the same code for reconfiguring VLANs during NIC load. Signed-off-by: Michal Schmidt Acked-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 151 ++++++++++------------- 1 file changed, 62 insertions(+), 89 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index c5fe915870ad..a59d55e25d5f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12895,52 +12895,71 @@ static int __bnx2x_vlan_configure_vid(struct bnx2x *bp, u16 vid, bool add) return rc; } -int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp) +static int bnx2x_vlan_configure_vid_list(struct bnx2x *bp) { struct bnx2x_vlan_entry *vlan; int rc = 0; - if (!bp->vlan_cnt) { - DP(NETIF_MSG_IFUP, "No need to re-configure vlan filters\n"); - return 0; - } - + /* Configure all non-configured entries */ list_for_each_entry(vlan, &bp->vlan_reg, link) { - /* Prepare for cleanup in case of errors */ - if (rc) { - vlan->hw = false; - continue; - } - - if (!vlan->hw) + if (vlan->hw) continue; - DP(NETIF_MSG_IFUP, "Re-configuring vlan 0x%04x\n", vlan->vid); + if (bp->vlan_cnt >= bp->vlan_credit) + return -ENOBUFS; rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true); if (rc) { - BNX2X_ERR("Unable to configure VLAN %d\n", vlan->vid); - vlan->hw = false; - rc = -EINVAL; - continue; + BNX2X_ERR("Unable to config VLAN %d\n", vlan->vid); + return rc; } + + DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n", vlan->vid); + vlan->hw = true; + bp->vlan_cnt++; } - return rc; + return 0; +} + +static void bnx2x_vlan_configure(struct bnx2x *bp, bool set_rx_mode) +{ + bool need_accept_any_vlan; + + need_accept_any_vlan = !!bnx2x_vlan_configure_vid_list(bp); + + if (bp->accept_any_vlan != need_accept_any_vlan) { + bp->accept_any_vlan = need_accept_any_vlan; + DP(NETIF_MSG_IFUP, "Accept all VLAN %s\n", + bp->accept_any_vlan ? "raised" : "cleared"); + if (set_rx_mode) { + if (IS_PF(bp)) + bnx2x_set_rx_mode_inner(bp); + else + bnx2x_vfpf_storm_rx_mode(bp); + } + } +} + +int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp) +{ + struct bnx2x_vlan_entry *vlan; + + /* The hw forgot all entries after reload */ + list_for_each_entry(vlan, &bp->vlan_reg, link) + vlan->hw = false; + bp->vlan_cnt = 0; + + /* Don't set rx mode here. Our caller will do it. */ + bnx2x_vlan_configure(bp, false); + + return 0; } static int bnx2x_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid) { struct bnx2x *bp = netdev_priv(dev); struct bnx2x_vlan_entry *vlan; - bool hw = false; - int rc = 0; - - if (!netif_running(bp->dev)) { - DP(NETIF_MSG_IFUP, - "Ignoring VLAN configuration the interface is down\n"); - return -EFAULT; - } DP(NETIF_MSG_IFUP, "Adding VLAN %d\n", vid); @@ -12948,93 +12967,47 @@ static int bnx2x_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid) if (!vlan) return -ENOMEM; - bp->vlan_cnt++; - if (bp->vlan_cnt > bp->vlan_credit && !bp->accept_any_vlan) { - DP(NETIF_MSG_IFUP, "Accept all VLAN raised\n"); - bp->accept_any_vlan = true; - if (IS_PF(bp)) - bnx2x_set_rx_mode_inner(bp); - else - bnx2x_vfpf_storm_rx_mode(bp); - } else if (bp->vlan_cnt <= bp->vlan_credit) { - rc = __bnx2x_vlan_configure_vid(bp, vid, true); - hw = true; - } - vlan->vid = vid; - vlan->hw = hw; + vlan->hw = false; + list_add_tail(&vlan->link, &bp->vlan_reg); - if (!rc) { - list_add(&vlan->link, &bp->vlan_reg); - } else { - bp->vlan_cnt--; - kfree(vlan); - } - - DP(NETIF_MSG_IFUP, "Adding VLAN result %d\n", rc); + if (netif_running(dev)) + bnx2x_vlan_configure(bp, true); - return rc; + return 0; } static int bnx2x_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid) { struct bnx2x *bp = netdev_priv(dev); struct bnx2x_vlan_entry *vlan; + bool found = false; int rc = 0; - if (!netif_running(bp->dev)) { - DP(NETIF_MSG_IFUP, - "Ignoring VLAN configuration the interface is down\n"); - return -EFAULT; - } - DP(NETIF_MSG_IFUP, "Removing VLAN %d\n", vid); - if (!bp->vlan_cnt) { - BNX2X_ERR("Unable to kill VLAN %d\n", vid); - return -EINVAL; - } - list_for_each_entry(vlan, &bp->vlan_reg, link) - if (vlan->vid == vid) + if (vlan->vid == vid) { + found = true; break; + } - if (vlan->vid != vid) { + if (!found) { BNX2X_ERR("Unable to kill VLAN %d - not found\n", vid); return -EINVAL; } - if (vlan->hw) + if (netif_running(dev) && vlan->hw) { rc = __bnx2x_vlan_configure_vid(bp, vid, false); + DP(NETIF_MSG_IFUP, "HW deconfigured for VLAN %d\n", vid); + bp->vlan_cnt--; + } list_del(&vlan->link); kfree(vlan); - bp->vlan_cnt--; - - if (bp->vlan_cnt <= bp->vlan_credit && bp->accept_any_vlan) { - /* Configure all non-configured entries */ - list_for_each_entry(vlan, &bp->vlan_reg, link) { - if (vlan->hw) - continue; - - rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true); - if (rc) { - BNX2X_ERR("Unable to config VLAN %d\n", - vlan->vid); - continue; - } - DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n", - vlan->vid); - vlan->hw = true; - } - DP(NETIF_MSG_IFUP, "Accept all VLAN Removed\n"); - bp->accept_any_vlan = false; - if (IS_PF(bp)) - bnx2x_set_rx_mode_inner(bp); - else - bnx2x_vfpf_storm_rx_mode(bp); - } + if (netif_running(dev)) + bnx2x_vlan_configure(bp, true); DP(NETIF_MSG_IFUP, "Removing VLAN result %d\n", rc); -- cgit v1.2.3 From fee48cf8374569a3888fd8c8536283e6067f0cfb Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Fri, 1 Apr 2016 14:12:12 -0700 Subject: ath10k: fix deadlock when peer cannot be created We must not attempt to send WMI packets while holding the data-lock, as it may deadlock: BUG: sleeping function called from invalid context at drivers/net/wireless/ath/ath10k/wmi.c:1824 in_atomic(): 1, irqs_disabled(): 0, pid: 2878, name: wpa_supplicant ============================================= [ INFO: possible recursive locking detected ] 4.4.6+ #21 Tainted: G W O --------------------------------------------- wpa_supplicant/2878 is trying to acquire lock: (&(&ar->data_lock)->rlock){+.-...}, at: [] ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] but task is already holding lock: (&(&ar->data_lock)->rlock){+.-...}, at: [] ath10k_peer_create+0x122/0x1ae [ath10k_core] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&ar->data_lock)->rlock); lock(&(&ar->data_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by wpa_supplicant/2878: #0: (rtnl_mutex){+.+.+.}, at: [] rtnl_lock+0x12/0x14 #1: (&ar->conf_mutex){+.+.+.}, at: [] ath10k_add_interface+0x3b/0xbda [ath10k_core] #2: (&(&ar->data_lock)->rlock){+.-...}, at: [] ath10k_peer_create+0x122/0x1ae [ath10k_core] #3: (rcu_read_lock){......}, at: [] rcu_read_lock+0x0/0x66 [mac80211] stack backtrace: CPU: 3 PID: 2878 Comm: wpa_supplicant Tainted: G W O 4.4.6+ #21 Hardware name: To be filled by O.E.M. To be filled by O.E.M./ChiefRiver, BIOS 4.6.5 06/07/2013 0000000000000000 ffff8801fcadf8f0 ffffffff8137086d ffffffff82681720 ffffffff82681720 ffff8801fcadf9b0 ffffffff8112e3be ffff8801fcadf920 0000000100000000 ffffffff82681720 ffffffffa0721500 ffff8801fcb8d348 Call Trace: [] dump_stack+0x81/0xb6 [] __lock_acquire+0xc5b/0xde7 [] ? ath10k_wmi_tx_beacons_iter+0x15/0x11a [ath10k_core] [] ? mark_lock+0x24/0x201 [] lock_acquire+0x132/0x1cb [] ? lock_acquire+0x132/0x1cb [] ? ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [] _raw_spin_lock_bh+0x31/0x40 [] ? ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [] ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [] __iterate_interfaces+0x9d/0x13d [mac80211] [] ieee80211_iterate_active_interfaces_atomic+0x32/0x3e [mac80211] [] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [] ath10k_wmi_tx_beacons_nowait.isra.13+0x14/0x16 [ath10k_core] [] ath10k_wmi_cmd_send+0x71/0x242 [ath10k_core] [] ath10k_wmi_peer_delete+0x3f/0x42 [ath10k_core] [] ath10k_peer_create+0x15e/0x1ae [ath10k_core] [] ath10k_add_interface+0x70d/0xbda [ath10k_core] [] drv_add_interface+0x123/0x1a5 [mac80211] [] ieee80211_do_open+0x351/0x667 [mac80211] [] ieee80211_open+0x49/0x4c [mac80211] [] __dev_open+0x88/0xde [] __dev_change_flags+0xa4/0x13a [] dev_change_flags+0x1f/0x54 [] devinet_ioctl+0x2b9/0x5c9 [] ? copy_to_user+0x32/0x38 [] inet_ioctl+0x81/0x9d [] ? inet_ioctl+0x81/0x9d [] sock_do_ioctl+0x20/0x3d [] sock_ioctl+0x222/0x22e [] do_vfs_ioctl+0x453/0x4d7 [] ? __sys_recvmsg+0x4c/0x5b [] ? __fget_light+0x48/0x6c [] SyS_ioctl+0x52/0x74 [] entry_SYSCALL_64_fastpath+0x16/0x7a Signed-off-by: Ben Greear Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 6dd1d26b357f..4040f9413e86 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -679,10 +679,10 @@ static int ath10k_peer_create(struct ath10k *ar, peer = ath10k_peer_find(ar, vdev_id, addr); if (!peer) { + spin_unlock_bh(&ar->data_lock); ath10k_warn(ar, "failed to find peer %pM on vdev %i after creation\n", addr, vdev_id); ath10k_wmi_peer_delete(ar, vdev_id, addr); - spin_unlock_bh(&ar->data_lock); return -ENOENT; } -- cgit v1.2.3 From b10c22e5f9902a329450c2027e9291b71e9f1602 Mon Sep 17 00:00:00 2001 From: Herve Jourdain Date: Wed, 1 Jun 2016 02:24:46 +0800 Subject: drm/vc4: Fix ioctl permissions for render nodes. Contrary to other flags to DRM_IOCTL_DEF_DRV(), which restrict usage, the flag for render node is an enabler (the IOCTL can't be used from render node if it's not present). So DRM_RENDER_ALLOW needs to be added to all the flags that were previously 0. Signed-off-by: Herve Jourdain Reviewed-by: Eric Anholt Fixes: 0cd3e2747662 ("drm/vc4: Add missing render node support") --- drivers/gpu/drm/vc4/vc4_drv.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c index ef7de8eb2b63..250ed7e3754c 100644 --- a/drivers/gpu/drm/vc4/vc4_drv.c +++ b/drivers/gpu/drm/vc4/vc4_drv.c @@ -66,12 +66,12 @@ static const struct file_operations vc4_drm_fops = { }; static const struct drm_ioctl_desc vc4_drm_ioctls[] = { - DRM_IOCTL_DEF_DRV(VC4_SUBMIT_CL, vc4_submit_cl_ioctl, 0), - DRM_IOCTL_DEF_DRV(VC4_WAIT_SEQNO, vc4_wait_seqno_ioctl, 0), - DRM_IOCTL_DEF_DRV(VC4_WAIT_BO, vc4_wait_bo_ioctl, 0), - DRM_IOCTL_DEF_DRV(VC4_CREATE_BO, vc4_create_bo_ioctl, 0), - DRM_IOCTL_DEF_DRV(VC4_MMAP_BO, vc4_mmap_bo_ioctl, 0), - DRM_IOCTL_DEF_DRV(VC4_CREATE_SHADER_BO, vc4_create_shader_bo_ioctl, 0), + DRM_IOCTL_DEF_DRV(VC4_SUBMIT_CL, vc4_submit_cl_ioctl, DRM_RENDER_ALLOW), + DRM_IOCTL_DEF_DRV(VC4_WAIT_SEQNO, vc4_wait_seqno_ioctl, DRM_RENDER_ALLOW), + DRM_IOCTL_DEF_DRV(VC4_WAIT_BO, vc4_wait_bo_ioctl, DRM_RENDER_ALLOW), + DRM_IOCTL_DEF_DRV(VC4_CREATE_BO, vc4_create_bo_ioctl, DRM_RENDER_ALLOW), + DRM_IOCTL_DEF_DRV(VC4_MMAP_BO, vc4_mmap_bo_ioctl, DRM_RENDER_ALLOW), + DRM_IOCTL_DEF_DRV(VC4_CREATE_SHADER_BO, vc4_create_shader_bo_ioctl, DRM_RENDER_ALLOW), DRM_IOCTL_DEF_DRV(VC4_GET_HANG_STATE, vc4_get_hang_state_ioctl, DRM_ROOT_ONLY), }; -- cgit v1.2.3 From 56d1fe0979dc9b73c1c12ee07722ac380d42a0c4 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Wed, 18 May 2016 14:02:46 +0200 Subject: drm/vc4: Make pageflip completion handling more robust. Protect both the setup of the pageflip event and the latching of the new requested displaylist head pointer by the event lock, so we can't get into a situation where vc4_atomic_flush latches the new display list via HVS_WRITE, then immediately gets preempted before queueing the pageflip event, then the page-flip completes in hw and the vc4_crtc_handle_page_flip() runs and no-ops due to lack of a pending pageflip event, then vc4_atomic_flush continues and only then queues the pageflip event - after the page flip handling already no-oped. This would cause flip completion handling only at the next vblank - one frame too late. In vc4_crtc_handle_page_flip() check the actual DL head pointer in SCALER_DISPLACTX against the requested pointer for page flip to make sure that the flip actually really completed in the current vblank and doesn't get deferred to the next one because the DL head pointer was written a bit too late into SCALER_DISPLISTX, after start of vblank, and missed the boat. This avoids handling a pageflip completion too early - one frame too early. According to Eric, DL head pointer updates which were written into the HVS DISPLISTX reg get committed to hardware at the last pixel of active scanout. Our vblank interrupt handler, as triggered by PV_INT_VFP_START irq, gets to run earliest at the first pixel of HBLANK at the end of the last scanline of active scanout, ie. vblank irq handling runs at least 1 pixel duration after a potential pageflip completion happened in hardware. This ordering of events in the hardware, together with the lock protection and SCALER_DISPLACTX sampling of this patch, guarantees that pageflip completion handling only runs at exactly the vblank irq of actual pageflip completion in all cases. Background info from Eric about the relative timing of HVS, PV's and trigger points for interrupts, DL updates: https://lists.freedesktop.org/archives/dri-devel/2016-May/107510.html Tested on RPi 2B with hardware timing measurement equipment and shown to no longer complete flips too early or too late. Signed-off-by: Mario Kleiner Reviewed-by: Eric Anholt --- drivers/gpu/drm/vc4/vc4_crtc.c | 28 ++++++++++++++++++---------- drivers/gpu/drm/vc4/vc4_regs.h | 4 ++++ 2 files changed, 22 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index e9befb6d10fd..0f18b76c7906 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -456,14 +456,6 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, WARN_ON_ONCE(dlist_next - dlist_start != vc4_state->mm.size); - HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel), - vc4_state->mm.start); - - if (debug_dump_regs) { - DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc)); - vc4_hvs_dump_state(dev); - } - if (crtc->state->event) { unsigned long flags; @@ -473,8 +465,20 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, spin_lock_irqsave(&dev->event_lock, flags); vc4_crtc->event = crtc->state->event; - spin_unlock_irqrestore(&dev->event_lock, flags); crtc->state->event = NULL; + + HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel), + vc4_state->mm.start); + + spin_unlock_irqrestore(&dev->event_lock, flags); + } else { + HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel), + vc4_state->mm.start); + } + + if (debug_dump_regs) { + DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc)); + vc4_hvs_dump_state(dev); } } @@ -500,10 +504,14 @@ static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) { struct drm_crtc *crtc = &vc4_crtc->base; struct drm_device *dev = crtc->dev; + struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state); + u32 chan = vc4_crtc->channel; unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); - if (vc4_crtc->event) { + if (vc4_crtc->event && + (vc4_state->mm.start == HVS_READ(SCALER_DISPLACTX(chan)))) { drm_crtc_send_vblank_event(crtc, vc4_crtc->event); vc4_crtc->event = NULL; drm_crtc_vblank_put(crtc); diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h index 6163b95c5411..f99eece4cc97 100644 --- a/drivers/gpu/drm/vc4/vc4_regs.h +++ b/drivers/gpu/drm/vc4/vc4_regs.h @@ -341,6 +341,10 @@ #define SCALER_DISPLACT0 0x00000030 #define SCALER_DISPLACT1 0x00000034 #define SCALER_DISPLACT2 0x00000038 +#define SCALER_DISPLACTX(x) (SCALER_DISPLACT0 + \ + (x) * (SCALER_DISPLACT1 - \ + SCALER_DISPLACT0)) + #define SCALER_DISPCTRL0 0x00000040 # define SCALER_DISPCTRLX_ENABLE BIT(31) # define SCALER_DISPCTRLX_RESET BIT(30) -- cgit v1.2.3 From a8953c52b95167b5d21a66f0859751570271d834 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 3 Jun 2016 14:37:40 +1000 Subject: drm/nouveau/disp/sor/gf119: both links use the same training register It appears that, for whatever reason, both link A and B use the same register to control the training pattern. It's a little odd, as the GPUs before this (Tesla/Fermi1) have per-link registers, as do newer GPUs (Maxwell). Fixes the third DP output on NVS 510 (GK107). Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c index b4b41b135643..5111560b4809 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c @@ -40,8 +40,7 @@ static int gf119_sor_dp_pattern(struct nvkm_output_dp *outp, int pattern) { struct nvkm_device *device = outp->base.disp->engine.subdev.device; - const u32 loff = gf119_sor_loff(outp); - nvkm_mask(device, 0x61c110 + loff, 0x0f0f0f0f, 0x01010101 * pattern); + nvkm_mask(device, 0x61c110, 0x0f0f0f0f, 0x01010101 * pattern); return 0; } -- cgit v1.2.3 From 4691409b3e2250ed66aa8dcefa23fe765daf7add Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 3 Jun 2016 15:05:52 +1000 Subject: drm/nouveau/disp/sor/gm107: training pattern registers are like gm200 Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/nvkm/engine/disp/Kbuild | 1 + drivers/gpu/drm/nouveau/nvkm/engine/disp/gm107.c | 2 +- drivers/gpu/drm/nouveau/nvkm/engine/disp/outpdp.h | 9 +++- .../gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c | 2 +- .../gpu/drm/nouveau/nvkm/engine/disp/sorgm107.c | 53 ++++++++++++++++++++++ .../gpu/drm/nouveau/nvkm/engine/disp/sorgm200.c | 15 +----- 6 files changed, 64 insertions(+), 18 deletions(-) create mode 100644 drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgm107.c (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/Kbuild b/drivers/gpu/drm/nouveau/nvkm/engine/disp/Kbuild index a74c5dd27dc0..e2a64ed14b22 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/Kbuild +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/Kbuild @@ -18,6 +18,7 @@ nvkm-y += nvkm/engine/disp/piornv50.o nvkm-y += nvkm/engine/disp/sornv50.o nvkm-y += nvkm/engine/disp/sorg94.o nvkm-y += nvkm/engine/disp/sorgf119.o +nvkm-y += nvkm/engine/disp/sorgm107.o nvkm-y += nvkm/engine/disp/sorgm200.o nvkm-y += nvkm/engine/disp/dport.o diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/gm107.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/gm107.c index b6944142d616..f4b9cf8574be 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/gm107.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/gm107.c @@ -36,7 +36,7 @@ gm107_disp = { .outp.internal.crt = nv50_dac_output_new, .outp.internal.tmds = nv50_sor_output_new, .outp.internal.lvds = nv50_sor_output_new, - .outp.internal.dp = gf119_sor_dp_new, + .outp.internal.dp = gm107_sor_dp_new, .dac.nr = 3, .dac.power = nv50_dac_power, .dac.sense = nv50_dac_sense, diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/outpdp.h b/drivers/gpu/drm/nouveau/nvkm/engine/disp/outpdp.h index e9067ba4e179..4e983f6d7032 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/outpdp.h +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/outpdp.h @@ -62,7 +62,12 @@ int g94_sor_dp_lnk_pwr(struct nvkm_output_dp *, int); int gf119_sor_dp_new(struct nvkm_disp *, int, struct dcb_output *, struct nvkm_output **); int gf119_sor_dp_lnk_ctl(struct nvkm_output_dp *, int, int, bool); +int gf119_sor_dp_drv_ctl(struct nvkm_output_dp *, int, int, int, int); -int gm200_sor_dp_new(struct nvkm_disp *, int, struct dcb_output *, - struct nvkm_output **); +int gm107_sor_dp_new(struct nvkm_disp *, int, struct dcb_output *, + struct nvkm_output **); +int gm107_sor_dp_pattern(struct nvkm_output_dp *, int); + +int gm200_sor_dp_new(struct nvkm_disp *, int, struct dcb_output *, + struct nvkm_output **); #endif diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c index 5111560b4809..22706c0a54b5 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c @@ -63,7 +63,7 @@ gf119_sor_dp_lnk_ctl(struct nvkm_output_dp *outp, int nr, int bw, bool ef) return 0; } -static int +int gf119_sor_dp_drv_ctl(struct nvkm_output_dp *outp, int ln, int vs, int pe, int pc) { diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgm107.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgm107.c new file mode 100644 index 000000000000..37790b2617c5 --- /dev/null +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgm107.c @@ -0,0 +1,53 @@ +/* + * Copyright 2016 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Ben Skeggs + */ +#include "nv50.h" +#include "outpdp.h" + +int +gm107_sor_dp_pattern(struct nvkm_output_dp *outp, int pattern) +{ + struct nvkm_device *device = outp->base.disp->engine.subdev.device; + const u32 soff = outp->base.or * 0x800; + const u32 data = 0x01010101 * pattern; + if (outp->base.info.sorconf.link & 1) + nvkm_mask(device, 0x61c110 + soff, 0x0f0f0f0f, data); + else + nvkm_mask(device, 0x61c12c + soff, 0x0f0f0f0f, data); + return 0; +} + +static const struct nvkm_output_dp_func +gm107_sor_dp_func = { + .pattern = gm107_sor_dp_pattern, + .lnk_pwr = g94_sor_dp_lnk_pwr, + .lnk_ctl = gf119_sor_dp_lnk_ctl, + .drv_ctl = gf119_sor_dp_drv_ctl, +}; + +int +gm107_sor_dp_new(struct nvkm_disp *disp, int index, + struct dcb_output *dcbE, struct nvkm_output **poutp) +{ + return nvkm_output_dp_new_(&gm107_sor_dp_func, disp, index, dcbE, poutp); +} diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgm200.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgm200.c index 2cfbef9c344f..c44fa7ea672a 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgm200.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgm200.c @@ -56,19 +56,6 @@ gm200_sor_dp_lane_map(struct nvkm_device *device, u8 lane) return lane * 0x08; } -static int -gm200_sor_dp_pattern(struct nvkm_output_dp *outp, int pattern) -{ - struct nvkm_device *device = outp->base.disp->engine.subdev.device; - const u32 soff = gm200_sor_soff(outp); - const u32 data = 0x01010101 * pattern; - if (outp->base.info.sorconf.link & 1) - nvkm_mask(device, 0x61c110 + soff, 0x0f0f0f0f, data); - else - nvkm_mask(device, 0x61c12c + soff, 0x0f0f0f0f, data); - return 0; -} - static int gm200_sor_dp_lnk_pwr(struct nvkm_output_dp *outp, int nr) { @@ -129,7 +116,7 @@ gm200_sor_dp_drv_ctl(struct nvkm_output_dp *outp, static const struct nvkm_output_dp_func gm200_sor_dp_func = { - .pattern = gm200_sor_dp_pattern, + .pattern = gm107_sor_dp_pattern, .lnk_pwr = gm200_sor_dp_lnk_pwr, .lnk_ctl = gf119_sor_dp_lnk_ctl, .drv_ctl = gm200_sor_dp_drv_ctl, -- cgit v1.2.3 From 943f44d94aa26bfdcaafc40d3701e24eeb58edce Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 25 Mar 2016 08:33:16 -0700 Subject: IB/cm: Fix a recently introduced locking bug ib_cm_notify() can be called from interrupt context. Hence do not reenable interrupts unconditionally in cm_establish(). This patch avoids that lockdep reports the following warning: WARNING: CPU: 0 PID: 23317 at kernel/locking/lockdep.c:2624 trace _hardirqs_on_caller+0x112/0x1b0 DEBUG_LOCKS_WARN_ON(current->hardirq_context) Call Trace: [] dump_stack+0x67/0x92 [] __warn+0xc1/0xe0 [] warn_slowpath_fmt+0x4a/0x50 [] trace_hardirqs_on_caller+0x112/0x1b0 [] trace_hardirqs_on+0xd/0x10 [] _raw_spin_unlock_irq+0x27/0x40 [] ib_cm_notify+0x25c/0x290 [ib_cm] [] srpt_qp_event+0xa1/0xf0 [ib_srpt] [] mlx4_ib_qp_event+0x67/0xd0 [mlx4_ib] [] mlx4_qp_event+0x5a/0xc0 [mlx4_core] [] mlx4_eq_int+0x3d8/0xcf0 [mlx4_core] [] mlx4_msi_x_interrupt+0xc/0x20 [mlx4_core] [] handle_irq_event_percpu+0x64/0x100 [] handle_irq_event+0x34/0x60 [] handle_edge_irq+0x6a/0x150 [] handle_irq+0x15/0x20 [] do_IRQ+0x5c/0x110 [] common_interrupt+0x89/0x89 [] blk_run_queue_async+0x37/0x40 [] rq_completed+0x43/0x70 [dm_mod] [] dm_softirq_done+0x176/0x280 [dm_mod] [] blk_done_softirq+0x52/0x90 [] __do_softirq+0x10f/0x230 [] irq_exit+0xa8/0xb0 [] smp_trace_call_function_single_interrupt+0x2e/0x30 [] smp_call_function_single_interrupt+0x9/0x10 [] call_function_single_interrupt+0x89/0x90 Fixes: commit be4b499323bf (IB/cm: Do not queue work to a device that's going away) Signed-off-by: Bart Van Assche Cc: Erez Shitrit Cc: Sean Hefty Cc: Nikolay Borisov Cc: stable # v4.2+ Acked-by: Erez Shitrit Signed-off-by: Doug Ledford --- drivers/infiniband/core/cm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 1d92e091e22e..c99525512b34 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -3452,14 +3452,14 @@ static int cm_establish(struct ib_cm_id *cm_id) work->cm_event.event = IB_CM_USER_ESTABLISHED; /* Check if the device started its remove_one */ - spin_lock_irq(&cm.lock); + spin_lock_irqsave(&cm.lock, flags); if (!cm_dev->going_down) { queue_delayed_work(cm.wq, &work->work, 0); } else { kfree(work); ret = -ENODEV; } - spin_unlock_irq(&cm.lock); + spin_unlock_irqrestore(&cm.lock, flags); out: return ret; -- cgit v1.2.3 From a8b7da58ec81e74a3a6982e2dba24f899b56c915 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 28 May 2016 08:01:20 +0300 Subject: IB/hfi1: fix some indenting That extra tabs are misleading. Signed-off-by: Dan Carpenter Reviewed-by: Bart Van Assche Acked-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c index 5cc492e5776d..0d28a5a40fae 100644 --- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -1337,7 +1337,7 @@ static void cleanup_device_data(struct hfi1_devdata *dd) dma_free_coherent(&dd->pcidev->dev, sizeof(u64), (void *)dd->rcvhdrtail_dummy_kvaddr, dd->rcvhdrtail_dummy_physaddr); - dd->rcvhdrtail_dummy_kvaddr = NULL; + dd->rcvhdrtail_dummy_kvaddr = NULL; } for (ctxt = 0; tmp && ctxt < dd->num_rcv_contexts; ctxt++) { -- cgit v1.2.3 From f242d93ae92032f78840471e5c2bfc2d04ae324c Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Tue, 31 May 2016 10:54:36 +0300 Subject: IB/hfi1: Avoid large frame size warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When CONFIG_FRAME_WARN is set to 1024 bytes, which is useful to find stack consumers, we get a warning in hfi1 driver. drivers/infiniband/hw/hfi1/affinity.c: In function ‘hfi1_get_proc_affinity’: drivers/infiniband/hw/hfi1/affinity.c:415:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] This change removes unneeded buf[1024] declaration and usage. Fixes: f48ad614c100 ("IB/hfi1: Move driver out of staging") Signed-off-by: Leon Romanovsky Acked-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/affinity.c | 31 ++++++++++++++----------------- 1 file changed, 14 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/affinity.c b/drivers/infiniband/hw/hfi1/affinity.c index 6e7050ab9e16..14d7eeb09be6 100644 --- a/drivers/infiniband/hw/hfi1/affinity.c +++ b/drivers/infiniband/hw/hfi1/affinity.c @@ -300,16 +300,15 @@ int hfi1_get_proc_affinity(struct hfi1_devdata *dd, int node) const struct cpumask *node_mask, *proc_mask = tsk_cpus_allowed(current); struct cpu_mask_set *set = &dd->affinity->proc; - char buf[1024]; /* * check whether process/context affinity has already * been set */ if (cpumask_weight(proc_mask) == 1) { - scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(proc_mask)); - hfi1_cdbg(PROC, "PID %u %s affinity set to CPU %s", - current->pid, current->comm, buf); + hfi1_cdbg(PROC, "PID %u %s affinity set to CPU %*pbl", + current->pid, current->comm, + cpumask_pr_args(proc_mask)); /* * Mark the pre-set CPU as used. This is atomic so we don't * need the lock @@ -318,9 +317,9 @@ int hfi1_get_proc_affinity(struct hfi1_devdata *dd, int node) cpumask_set_cpu(cpu, &set->used); goto done; } else if (cpumask_weight(proc_mask) < cpumask_weight(&set->mask)) { - scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(proc_mask)); - hfi1_cdbg(PROC, "PID %u %s affinity set to CPU set(s) %s", - current->pid, current->comm, buf); + hfi1_cdbg(PROC, "PID %u %s affinity set to CPU set(s) %*pbl", + current->pid, current->comm, + cpumask_pr_args(proc_mask)); goto done; } @@ -356,8 +355,8 @@ int hfi1_get_proc_affinity(struct hfi1_devdata *dd, int node) cpumask_or(intrs, intrs, (dd->affinity->rcv_intr.gen ? &dd->affinity->rcv_intr.mask : &dd->affinity->rcv_intr.used)); - scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(intrs)); - hfi1_cdbg(PROC, "CPUs used by interrupts: %s", buf); + hfi1_cdbg(PROC, "CPUs used by interrupts: %*pbl", + cpumask_pr_args(intrs)); /* * If we don't have a NUMA node requested, preference is towards @@ -366,18 +365,16 @@ int hfi1_get_proc_affinity(struct hfi1_devdata *dd, int node) if (node == -1) node = dd->node; node_mask = cpumask_of_node(node); - scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(node_mask)); - hfi1_cdbg(PROC, "device on NUMA %u, CPUs %s", node, buf); + hfi1_cdbg(PROC, "device on NUMA %u, CPUs %*pbl", node, + cpumask_pr_args(node_mask)); /* diff will hold all unused cpus */ cpumask_andnot(diff, &set->mask, &set->used); - scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(diff)); - hfi1_cdbg(PROC, "unused CPUs (all) %s", buf); + hfi1_cdbg(PROC, "unused CPUs (all) %*pbl", cpumask_pr_args(diff)); /* get cpumask of available CPUs on preferred NUMA */ cpumask_and(mask, diff, node_mask); - scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(mask)); - hfi1_cdbg(PROC, "available cpus on NUMA %s", buf); + hfi1_cdbg(PROC, "available cpus on NUMA %*pbl", cpumask_pr_args(mask)); /* * At first, we don't want to place processes on the same @@ -395,8 +392,8 @@ int hfi1_get_proc_affinity(struct hfi1_devdata *dd, int node) cpumask_andnot(diff, &set->mask, &set->used); cpumask_andnot(mask, diff, node_mask); } - scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(mask)); - hfi1_cdbg(PROC, "possible CPUs for process %s", buf); + hfi1_cdbg(PROC, "possible CPUs for process %*pbl", + cpumask_pr_args(mask)); cpu = cpumask_first(mask); if (cpu >= nr_cpu_ids) /* empty */ -- cgit v1.2.3 From da1f857be62ca0472024da37eab068b3b8ce0a15 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 31 May 2016 19:05:56 +0300 Subject: IB/core: fix an error code in ib_core_init() We should return the error code if ib_add_ibnl_clients() fails. The current code returns success. Fixes: 735c631ae99d ('IB/core: Register SA ibnl client during ib_core initialization') Signed-off-by: Dan Carpenter Reviewed-by: Mark Bloch Signed-off-by: Doug Ledford --- drivers/infiniband/core/device.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index 5516fb070344..8b8a8d9cf134 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -1024,7 +1024,8 @@ static int __init ib_core_init(void) goto err_mad; } - if (ib_add_ibnl_clients()) { + ret = ib_add_ibnl_clients(); + if (ret) { pr_warn("Couldn't register ibnl clients\n"); goto err_sa; } -- cgit v1.2.3 From 0147ebcf8927f09e1923114092f6b14c1de75a95 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 1 Jun 2016 19:06:36 +0100 Subject: IB/core: fix null pointer deref and mem leak in error handling The current error handling in setup_hw_stats has a couple of issues. It is possible to generate a null pointer deference on the kfree of hsag->attrs[i] because two of the early error exit paths jump to the kfree when hsags NULL and not allocated. Fix this by moving the kfree on stats and jumping to that, avoiding the hsag freeing. Secondly, there is a memory leak of stats if the hsag allocation fails; instead of returning, jump to the kfree on stats. Signed-off-by: Colin Ian King Signed-off-by: Doug Ledford --- drivers/infiniband/core/sysfs.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 5e573bb18660..ed04a7bd4481 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -899,14 +899,14 @@ static void setup_hw_stats(struct ib_device *device, struct ib_port *port, return; if (!stats->names || stats->num_counters <= 0) - goto err; + goto err_free_stats; hsag = kzalloc(sizeof(*hsag) + // 1 extra for the lifespan config entry sizeof(void *) * (stats->num_counters + 1), GFP_KERNEL); if (!hsag) - return; + goto err_free_stats; ret = device->get_hw_stats(device, stats, port_num, stats->num_counters); @@ -946,10 +946,11 @@ static void setup_hw_stats(struct ib_device *device, struct ib_port *port, return; err: - kfree(stats); for (; i >= 0; i--) kfree(hsag->attrs[i]); kfree(hsag); +err_free_stats: + kfree(stats); return; } -- cgit v1.2.3 From ce67fef68de552b14ae417511a323013b478f78e Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 2 Jun 2016 11:45:01 +0200 Subject: IB/usnic: Remove unused DMA attributes The DMA attributes are set but never used. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Doug Ledford --- drivers/infiniband/hw/usnic/usnic_uiom.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/usnic/usnic_uiom.c b/drivers/infiniband/hw/usnic/usnic_uiom.c index 7209fbc03ccb..a0b6ebee4d8a 100644 --- a/drivers/infiniband/hw/usnic/usnic_uiom.c +++ b/drivers/infiniband/hw/usnic/usnic_uiom.c @@ -36,7 +36,6 @@ #include #include #include -#include #include #include #include @@ -112,10 +111,6 @@ static int usnic_uiom_get_pages(unsigned long addr, size_t size, int writable, int i; int flags; dma_addr_t pa; - DEFINE_DMA_ATTRS(attrs); - - if (dmasync) - dma_set_attr(DMA_ATTR_WRITE_BARRIER, &attrs); if (!can_do_mlock()) return -EPERM; -- cgit v1.2.3 From ca920f5b67f1b798a1f86c675ea441b295bf8464 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 3 Jun 2016 07:58:32 -0700 Subject: IB/mlx4: Fix device managed flow steering support test Perform the test for device managed flow steering support even if memory windows are not supported. I noticed this because smatch reported inconsistent indentation for the device managed flow steering support test. Signed-off-by: Bart Van Assche Reviewed-by: Sagi Grimberg Cc: Yishai Hadas Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index b01ef6eee6e8..0eb09e104542 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -505,9 +505,9 @@ static int mlx4_ib_query_device(struct ib_device *ibdev, props->device_cap_flags |= IB_DEVICE_MEM_WINDOW_TYPE_2B; else props->device_cap_flags |= IB_DEVICE_MEM_WINDOW_TYPE_2A; - if (dev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED) - props->device_cap_flags |= IB_DEVICE_MANAGED_FLOW_STEERING; } + if (dev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED) + props->device_cap_flags |= IB_DEVICE_MANAGED_FLOW_STEERING; props->device_cap_flags |= IB_DEVICE_RAW_IP_CSUM; -- cgit v1.2.3 From 249f06561fc333581e48e6d388a56e3d100d23b6 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 3 Jun 2016 11:39:35 -0700 Subject: IB/srp: Always initialize use_fast_reg and use_fmr Avoid that mapping fails due to use_fast_reg != 0 or use_fmr != 0 if both member variables should be zero (if never_register == 1 or if neither FMR nor FR is supported). Remove an initialization that became superfluous due to changing a kmalloc() into a kzalloc() call. Fixes: 509c5f33f4f6 ("IB/srp: Prevent mapping failures") Cc: Sagi Grimberg Cc: Christoph Hellwig Cc: Laurence Oberman Signed-off-by: Bart Van Assche Reviewed-by: Leon Romanovsky Reviewed-by: Sagi Grimberg Reviewed-by: Christoph Hellwig Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/srp/ib_srp.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 646de170ec12..bc24b8d32ce6 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -3526,7 +3526,7 @@ static void srp_add_one(struct ib_device *device) int mr_page_shift, p; u64 max_pages_per_mr; - srp_dev = kmalloc(sizeof *srp_dev, GFP_KERNEL); + srp_dev = kzalloc(sizeof(*srp_dev), GFP_KERNEL); if (!srp_dev) return; @@ -3586,8 +3586,6 @@ static void srp_add_one(struct ib_device *device) IB_ACCESS_REMOTE_WRITE); if (IS_ERR(srp_dev->global_mr)) goto err_pd; - } else { - srp_dev->global_mr = NULL; } for (p = rdma_start_port(device); p <= rdma_end_port(device); ++p) { -- cgit v1.2.3 From 9edba790fc52322051fd7b6589421021f0726483 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 3 Jun 2016 11:40:24 -0700 Subject: IB/srp: Fix srp_map_sg_dma() Because patch "IB/srp: Move common code into the caller" was applied partially srp_map_sg_dma() doesn't work properly. Fix this by applying the remainder of that patch. See also http://thread.gmane.org/gmane.linux.drivers.rdma/35803/focus=35811. Fixes: 3849e44d1c4b ("IB/srp: Move common code into the caller") Signed-off-by: Bart Van Assche Cc: Mike Marciniszyn Cc: Sagi Grimberg Cc: Christoph Hellwig Cc: Laurence Oberman Reviewed-by: Sagi Grimberg Reviewed-by: Christoph Hellwig Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/srp/ib_srp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index bc24b8d32ce6..3322ed750172 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -1457,7 +1457,6 @@ static int srp_map_sg_fr(struct srp_map_state *state, struct srp_rdma_ch *ch, { unsigned int sg_offset = 0; - state->desc = req->indirect_desc; state->fr.next = req->fr_list; state->fr.end = req->fr_list + ch->target->mr_per_cmd; state->sg = scat; @@ -1489,7 +1488,6 @@ static int srp_map_sg_dma(struct srp_map_state *state, struct srp_rdma_ch *ch, struct scatterlist *sg; int i; - state->desc = req->indirect_desc; for_each_sg(scat, sg, count, i) { srp_map_desc(state, ib_sg_dma_address(dev->dev, sg), ib_sg_dma_len(dev->dev, sg), @@ -1655,6 +1653,7 @@ static int srp_map_data(struct scsi_cmnd *scmnd, struct srp_rdma_ch *ch, target->indirect_size, DMA_TO_DEVICE); memset(&state, 0, sizeof(state)); + state.desc = req->indirect_desc; if (dev->use_fast_reg) ret = srp_map_sg_fr(&state, ch, req, scat, count); else if (dev->use_fmr) -- cgit v1.2.3 From 0270be78da8d27cc5588d2472694aa7ad2c680b3 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 3 Jun 2016 12:08:00 -0700 Subject: RDMA/core: Fix indentation Make indentation consistent. Detected by smatch. Signed-off-by: Bart Van Assche Cc: Tatyana Nikolova Cc: Steve Wise Reviewed-by: Steve Wise Reviewed-by: Sagi Grimberg Signed-off-by: Doug Ledford --- drivers/infiniband/core/iwpm_msg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/iwpm_msg.c b/drivers/infiniband/core/iwpm_msg.c index 43e3fa27102b..1c41b95cefec 100644 --- a/drivers/infiniband/core/iwpm_msg.c +++ b/drivers/infiniband/core/iwpm_msg.c @@ -506,7 +506,7 @@ int iwpm_add_and_query_mapping_cb(struct sk_buff *skb, if (!nlmsg_request) { pr_info("%s: Could not find a matching request (seq = %u)\n", __func__, msg_seq); - return -EINVAL; + return -EINVAL; } pm_msg = nlmsg_request->req_buffer; local_sockaddr = (struct sockaddr_storage *) -- cgit v1.2.3 From 2190d10de58101448b0ac360facc0d5166e3d30d Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 3 Jun 2016 12:08:44 -0700 Subject: IB/mad: Fix indentation Make indentation consistent. Detected by smatch. Signed-off-by: Bart Van Assche Cc: Hal Rosenstock Cc: Ira Weiny Reviewed-By: Ira Weiny Reviewed-by: Hal Rosenstock Reviewed-by: Sagi Grimberg Signed-off-by: Doug Ledford --- drivers/infiniband/core/mad.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 82fb511112da..2d49228f28b2 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -1638,9 +1638,9 @@ static void remove_mad_reg_req(struct ib_mad_agent_private *agent_priv) /* Now, check to see if there are any methods still in use */ if (!check_method_table(method)) { /* If not, release management method table */ - kfree(method); - class->method_table[mgmt_class] = NULL; - /* Any management classes left ? */ + kfree(method); + class->method_table[mgmt_class] = NULL; + /* Any management classes left ? */ if (!check_class_table(class)) { /* If not, release management class table */ kfree(class); -- cgit v1.2.3 From c0a67f6ba356521a8266694ffffa4998264d0cb0 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 3 Jun 2016 12:09:16 -0700 Subject: IB/rdmavt: Annotate rvt_reset_qp() This patch avoids that sparse reports the following warning: rdmavt/qp.c:507:17: warning: context imbalance in 'rvt_reset_qp' - unexpected unlock Signed-off-by: Bart Van Assche Cc: Mike Marciniszyn Cc: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rdmavt/qp.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c index 5fa4d4d81ee0..7de5134bec85 100644 --- a/drivers/infiniband/sw/rdmavt/qp.c +++ b/drivers/infiniband/sw/rdmavt/qp.c @@ -502,6 +502,12 @@ static void rvt_remove_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp) */ static void rvt_reset_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp, enum ib_qp_type type) + __releases(&qp->s_lock) + __releases(&qp->s_hlock) + __releases(&qp->r_lock) + __acquires(&qp->r_lock) + __acquires(&qp->s_hlock) + __acquires(&qp->s_lock) { if (qp->state != IB_QPS_RESET) { qp->state = IB_QPS_RESET; -- cgit v1.2.3 From 48a0cc139fb89590fd66eea11b626b9b9f6b8e9d Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 3 Jun 2016 12:09:56 -0700 Subject: IB/hfi1: Fix indentation Make the indentation of the source code consistent. Detected by smatch. Signed-off-by: Bart Van Assche Cc: Mike Marciniszyn Cc: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index 3b876da745a1..81619fbb5842 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -7832,8 +7832,8 @@ static void handle_dcc_err(struct hfi1_devdata *dd, u32 unused, u64 reg) * save first 2 flits in the packet that caused * the error */ - dd->err_info_rcvport.packet_flit1 = hdr0; - dd->err_info_rcvport.packet_flit2 = hdr1; + dd->err_info_rcvport.packet_flit1 = hdr0; + dd->err_info_rcvport.packet_flit2 = hdr1; } switch (info) { case 1: @@ -11906,7 +11906,7 @@ static void update_synth_timer(unsigned long opaque) hfi1_cdbg(CNTR, "[%d] No update necessary", dd->unit); } -mod_timer(&dd->synth_stats_timer, jiffies + HZ * SYNTH_CNT_TIME); + mod_timer(&dd->synth_stats_timer, jiffies + HZ * SYNTH_CNT_TIME); } #define C_MAX_NAME 13 /* 12 chars + one for /0 */ -- cgit v1.2.3 From d55215c50e4eaa4b906a42ef45884d8fcbadc777 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 3 Jun 2016 12:10:37 -0700 Subject: IB/hfi1: Use bit 0 instead of bit 1 The first argument of test_bit() and clear_bit() is a bit number and not a bitmask. Hence change that first argument from (1 << 0) into 0. This patch avoids that smatch reports the following warnings: user_sdma.c:1059: sdma_cache_evict() warn: test_bit() takes a bit number user_sdma.c:1590: sdma_rb_remove() warn: test_bit() takes a bit number Signed-off-by: Bart Van Assche Cc: Mike Marciniszyn Cc: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/user_sdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/user_sdma.c b/drivers/infiniband/hw/hfi1/user_sdma.c index 29f4795f866c..2eca5b7394a2 100644 --- a/drivers/infiniband/hw/hfi1/user_sdma.c +++ b/drivers/infiniband/hw/hfi1/user_sdma.c @@ -183,7 +183,7 @@ struct user_sdma_iovec { struct sdma_mmu_node *node; }; -#define SDMA_CACHE_NODE_EVICT BIT(0) +#define SDMA_CACHE_NODE_EVICT 0 struct sdma_mmu_node { struct mmu_rb_node rb; -- cgit v1.2.3 From 55c40648d31d0d97608f266955b8afae74e2b686 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 3 Jun 2016 12:11:16 -0700 Subject: IB/hfi1: Suppress sparse warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Avoid that sparse reports the following warnings for the hfi1 driver: trace.c:217:13: warning: no previous prototype for ‘print_u64_array’ [-Wmissing-prototypes] user_sdma.c:1361:17: warning: dubious: !x & y Signed-off-by: Bart Van Assche Cc: Mike Marciniszyn Cc: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/trace.c | 13 ------------- drivers/infiniband/hw/hfi1/user_sdma.c | 4 ++-- 2 files changed, 2 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/trace.c b/drivers/infiniband/hw/hfi1/trace.c index 79b2952c0dfb..4cfb13771897 100644 --- a/drivers/infiniband/hw/hfi1/trace.c +++ b/drivers/infiniband/hw/hfi1/trace.c @@ -214,19 +214,6 @@ const char *print_u32_array( return ret; } -const char *print_u64_array( - struct trace_seq *p, - u64 *arr, int len) -{ - int i; - const char *ret = trace_seq_buffer_ptr(p); - - for (i = 0; i < len; i++) - trace_seq_printf(p, "%s0x%016llx", i == 0 ? "" : " ", arr[i]); - trace_seq_putc(p, 0); - return ret; -} - __hfi1_trace_fn(PKT); __hfi1_trace_fn(PROC); __hfi1_trace_fn(SDMA); diff --git a/drivers/infiniband/hw/hfi1/user_sdma.c b/drivers/infiniband/hw/hfi1/user_sdma.c index 2eca5b7394a2..47ffd273ecbd 100644 --- a/drivers/infiniband/hw/hfi1/user_sdma.c +++ b/drivers/infiniband/hw/hfi1/user_sdma.c @@ -1355,11 +1355,11 @@ static int set_txreq_header(struct user_sdma_request *req, */ SDMA_DBG(req, "TID offset %ubytes %uunits om%u", req->tidoffset, req->tidoffset / req->omfactor, - !!(req->omfactor - KDETH_OM_SMALL)); + req->omfactor != KDETH_OM_SMALL); KDETH_SET(hdr->kdeth.ver_tid_offset, OFFSET, req->tidoffset / req->omfactor); KDETH_SET(hdr->kdeth.ver_tid_offset, OM, - !!(req->omfactor - KDETH_OM_SMALL)); + req->omfactor != KDETH_OM_SMALL); } done: trace_hfi1_sdma_user_header(pq->dd, pq->ctxt, pq->subctxt, -- cgit v1.2.3 From dcf15cbded656a12335bc4151f3f75f10080a375 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Fri, 3 Jun 2016 10:26:12 +0800 Subject: ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT EC According to the Windows probing result, during the table loading, the EC device described in the ECDT should be used. And the ECDT EC is also effective during the period the namespace objects are initialized (we can see a separate process executing _STA/_INI on Windows before executing other device specific control methods, for example, EC._REG). During the device enumration, the EC device described in the DSDT should be used. But there are differences between Linux and Windows around the device probing order. Thus in Linux, we should enable the DSDT EC as early as possible before enumerating devices in order not to trigger issues related to the device enumeration order differences. This patch thus converts acpi_boot_ec_enable() into acpi_ec_dsdt_probe() to fix the gap. This also fixes a user reported regression triggered after we switched the "table loading"/"ECDT support" to be ACPI spec 2.0 compliant. Fixes: 59f0aa9480cf (ACPI 2.0 / ECDT: Remove early namespace reference from EC) Link: https://bugzilla.kernel.org/show_bug.cgi?id=119261 Reported-and-tested-by: Gabriele Mazzotta Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/bus.c | 2 +- drivers/acpi/ec.c | 29 ++++++++++++++++++++++------- drivers/acpi/internal.h | 2 +- 3 files changed, 24 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 31e8da648fff..262ca31b86d9 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -1051,7 +1051,7 @@ static int __init acpi_bus_init(void) * Maybe EC region is required at bus_scan/acpi_get_devices. So it * is necessary to enable it as early as possible. */ - acpi_boot_ec_enable(); + acpi_ec_dsdt_probe(); printk(KERN_INFO PREFIX "Interpreter enabled\n"); diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 0e70181f150c..73c76d646064 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1446,10 +1446,30 @@ ec_parse_io_ports(struct acpi_resource *resource, void *context) return AE_OK; } -int __init acpi_boot_ec_enable(void) +static const struct acpi_device_id ec_device_ids[] = { + {"PNP0C09", 0}, + {"", 0}, +}; + +int __init acpi_ec_dsdt_probe(void) { - if (!boot_ec) + acpi_status status; + + if (boot_ec) return 0; + + /* + * Finding EC from DSDT if there is no ECDT EC available. When this + * function is invoked, ACPI tables have been fully loaded, we can + * walk namespace now. + */ + boot_ec = make_acpi_ec(); + if (!boot_ec) + return -ENOMEM; + status = acpi_get_devices(ec_device_ids[0].id, + ec_parse_device, boot_ec, NULL); + if (ACPI_FAILURE(status) || !boot_ec->handle) + return -ENODEV; if (!ec_install_handlers(boot_ec)) { first_ec = boot_ec; return 0; @@ -1457,11 +1477,6 @@ int __init acpi_boot_ec_enable(void) return -EFAULT; } -static const struct acpi_device_id ec_device_ids[] = { - {"PNP0C09", 0}, - {"", 0}, -}; - #if 0 /* * Some EC firmware variations refuses to respond QR_EC when SCI_EVT is not diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 7c188472d9c2..b4733b56fed1 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -180,7 +180,7 @@ typedef int (*acpi_ec_query_func) (void *data); int acpi_ec_init(void); int acpi_ec_ecdt_probe(void); -int acpi_boot_ec_enable(void); +int acpi_ec_dsdt_probe(void); void acpi_ec_block_transactions(void); void acpi_ec_unblock_transactions(void); void acpi_ec_unblock_transactions_early(void); -- cgit v1.2.3 From 5156463588c3999b630d9ffc6061a54962f3c2d9 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 1 Jun 2016 12:43:32 +0200 Subject: dmaengine: mv_xor: Fix incorrect offset in dma_map_page() Upon booting, I occasionally spotted some BUGs triggered by the internal DMA test routine executed upon driver probing. This was detected by SLUB_DEBUG ("Freechain corrupt" or "Redzone overwritten"). Tracking this down located a problem in passing 0 as offset in dma_map_page(). As kmalloc, especially when used with SLUB_DEBUG, may return a non page aligned address. This patch fixes this issue by passing the correct offset in dma_map_page(). Tested on a custom Armada XP board. Signed-off-by: Stefan Roese Cc: Thomas Petazzoni Cc: Gregory CLEMENT Cc: Marcin Wojtas Signed-off-by: Vinod Koul --- drivers/dma/mv_xor.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index 25d1dadcddd1..d0446a75990a 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -703,8 +703,9 @@ static int mv_chan_memcpy_self_test(struct mv_xor_chan *mv_chan) goto free_resources; } - src_dma = dma_map_page(dma_chan->device->dev, virt_to_page(src), 0, - PAGE_SIZE, DMA_TO_DEVICE); + src_dma = dma_map_page(dma_chan->device->dev, virt_to_page(src), + (size_t)src & ~PAGE_MASK, PAGE_SIZE, + DMA_TO_DEVICE); unmap->addr[0] = src_dma; ret = dma_mapping_error(dma_chan->device->dev, src_dma); @@ -714,8 +715,9 @@ static int mv_chan_memcpy_self_test(struct mv_xor_chan *mv_chan) } unmap->to_cnt = 1; - dest_dma = dma_map_page(dma_chan->device->dev, virt_to_page(dest), 0, - PAGE_SIZE, DMA_FROM_DEVICE); + dest_dma = dma_map_page(dma_chan->device->dev, virt_to_page(dest), + (size_t)dest & ~PAGE_MASK, PAGE_SIZE, + DMA_FROM_DEVICE); unmap->addr[1] = dest_dma; ret = dma_mapping_error(dma_chan->device->dev, dest_dma); -- cgit v1.2.3 From 8d0a0710ea0d22881fdb40eb79d346a98cc64ae6 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Thu, 2 Jun 2016 17:59:54 +0300 Subject: ath10k: fix crash related to printing features This looks like a regression from commit c4cdf753ed42 ("ath10k: move fw_features to struct ath10k_fw_file"), we were printing the features from a wrong struct. Fixes: c4cdf753ed42 ("ath10k: move fw_features to struct ath10k_fw_file") Signed-off-by: Ben Greear [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 49af62428c88..a92a0ba829f5 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -1083,7 +1083,7 @@ int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name, } ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "features", "", - ar->running_fw->fw_file.fw_features, + fw_file->fw_features, sizeof(fw_file->fw_features)); break; case ATH10K_FW_IE_FW_IMAGE: -- cgit v1.2.3 From 41aaa99fab6ceaa4b533c2b6ad4913987ddb3ddc Mon Sep 17 00:00:00 2001 From: Doug Ledford Date: Mon, 6 Jun 2016 19:52:55 -0400 Subject: IB/core: Fix array length allocation The new sysfs hw_counters code had an off by one in its array allocation length. Fix that and the comment along with it. Reported-by: Mark Bloch Fixes: b40f4757daa1 (IB/core: Make device counter infrastructure dynamic) Signed-off-by: Doug Ledford --- drivers/infiniband/core/sysfs.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index ed04a7bd4481..2bc43444841b 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -901,9 +901,12 @@ static void setup_hw_stats(struct ib_device *device, struct ib_port *port, if (!stats->names || stats->num_counters <= 0) goto err_free_stats; + /* + * Two extra attribue elements here, one for the lifespan entry and + * one to NULL terminate the list for the sysfs core code + */ hsag = kzalloc(sizeof(*hsag) + - // 1 extra for the lifespan config entry - sizeof(void *) * (stats->num_counters + 1), + sizeof(void *) * (stats->num_counters + 2), GFP_KERNEL); if (!hsag) goto err_free_stats; -- cgit v1.2.3 From 495fbae6e2c115099921ba33b1e1bea1190b5280 Mon Sep 17 00:00:00 2001 From: Doug Ledford Date: Tue, 7 Jun 2016 07:43:46 -0400 Subject: IB/core: fix error unwind in sysfs hw counters code Between the initial and final versions of the function setup_hw_stats, the order of variable initialization was changed. However, the unwind flow on error did not properly keep up with the flow changes. Make the unwind flow match a proper unwind of the allocation flow, then remove no longer needed variable initializations. Fixes: b40f4757daa1 (IB/core: Make device counter infrastructure dynamic) Signed-off-by: Doug Ledford --- drivers/infiniband/core/sysfs.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 2bc43444841b..35d0d47e6f8c 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -889,9 +889,9 @@ static struct attribute *alloc_hsa_lifespan(char *name, u8 port_num) static void setup_hw_stats(struct ib_device *device, struct ib_port *port, u8 port_num) { - struct attribute_group *hsag = NULL; + struct attribute_group *hsag; struct rdma_hw_stats *stats; - int i = 0, ret; + int i, ret; stats = device->alloc_hw_stats(device, port_num); @@ -914,7 +914,7 @@ static void setup_hw_stats(struct ib_device *device, struct ib_port *port, ret = device->get_hw_stats(device, stats, port_num, stats->num_counters); if (ret != stats->num_counters) - goto err; + goto err_free_hsag; stats->timestamp = jiffies; @@ -951,6 +951,7 @@ static void setup_hw_stats(struct ib_device *device, struct ib_port *port, err: for (; i >= 0; i--) kfree(hsag->attrs[i]); +err_free_hsag: kfree(hsag); err_free_stats: kfree(stats); -- cgit v1.2.3 From d7012467a95b767b4d3beb2e027aa24a83f12f0f Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Sat, 4 Jun 2016 15:15:18 +0300 Subject: IB/core: Fix query port failure in RoCE Currently ib_query_port always attempts to to read the subnet prefix by calling ib_query_gid(). For RoCE/iWARP there is no subnet manager and no subnet prefix. Fix this by querying GID[0] only for IB networks. Fixes: fad61ad4e755 ('IB/core: Add subnet prefix to port info') Signed-off-by: Eli Cohen Signed-off-by: Leon Romanovsky Reviewed-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/core/device.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index 8b8a8d9cf134..5c155fa91eec 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -661,6 +661,9 @@ int ib_query_port(struct ib_device *device, if (err || port_attr->subnet_prefix) return err; + if (rdma_port_get_link_layer(device, port_num) != IB_LINK_LAYER_INFINIBAND) + return 0; + err = ib_query_gid(device, port_num, 0, &gid, NULL); if (err) return err; -- cgit v1.2.3 From 198b12f77084244d310888dd5d643083cb5c2aa1 Mon Sep 17 00:00:00 2001 From: Erez Shitrit Date: Sat, 4 Jun 2016 15:15:20 +0300 Subject: IB/IPoIB: Fix race between ipoib_remove_one to sysfs functions In ipoib_remove_one the driver holds the rtnl_lock and tries to do some operation like dev_change_flags or unregister_netdev, while sysfs callback like ipoib_vlan_delete holds sysfs mutex and tries to hold the rtnl_lock via rtnl_trylock() and restart_syscall() if the lock is not free, meanwhile ipoib_remove_one tries to get the sysfs lock in order to free its sysfs directory, and we will get a->b, b->a deadlock. Trace like the following: schedule+0x37/0x80 schedule_preempt_disabled+0xe/0x10 __mutex_lock_slowpath+0xb5/0x120 mutex_lock+0x23/0x40 rtnl_lock+0x15/0x20 netdev_run_todo+0x17c/0x320 rtnl_unlock+0xe/0x10 ipoib_vlan_delete+0x11b/0x1b0 [ib_ipoib] delete_child+0x54/0x80 [ib_ipoib] dev_attr_store+0x18/0x30 sysfs_kf_write+0x37/0x40 mutex_lock+0x16/0x40 SyS_write+0x55/0xc0 entry_SYSCALL_64_fastpath+0x16/0x75 And schedule+0x37/0x80 __kernfs_remove+0x1a8/0x260 ? wake_atomic_t_function+0x60/0x60 kernfs_remove+0x25/0x40 sysfs_remove_dir+0x50/0x80 kobject_del+0x18/0x50 device_del+0x19f/0x260 netdev_unregister_kobject+0x6a/0x80 rollback_registered_many+0x1fd/0x340 rollback_registered+0x3c/0x70 unregister_netdevice_queue+0x55/0xc0 unregister_netdev+0x20/0x30 ipoib_remove_one+0x114/0x1b0 [ib_ipoib] ib_unregister_client+0x4a/0x170 [ib_core] ? find_module_all+0x71/0xa0 ipoib_cleanup_module+0x10/0x94 [ib_ipoib] SyS_delete_module+0x1b5/0x210 entry_SYSCALL_64_fastpath+0x16/0x75 The fix is by checking the flag IPOIB_FLAG_INTF_ON_DESTROY in order to get out from the sysfs function. Fixes: 862096a8bbf8 ("IB/ipoib: Add more rtnl_link_ops callbacks") Fixes: 9baa0b036410 ("IB/ipoib: Add rtnl_link_ops support") Signed-off-by: Erez Shitrit Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/ipoib/ipoib.h | 1 + drivers/infiniband/ulp/ipoib/ipoib_cm.c | 4 ++++ drivers/infiniband/ulp/ipoib/ipoib_main.c | 3 +++ drivers/infiniband/ulp/ipoib/ipoib_vlan.c | 6 ++++++ 4 files changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index bab7db6fa9ab..4f7d9b48df64 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -94,6 +94,7 @@ enum { IPOIB_NEIGH_TBL_FLUSH = 12, IPOIB_FLAG_DEV_ADDR_SET = 13, IPOIB_FLAG_DEV_ADDR_CTRL = 14, + IPOIB_FLAG_GOING_DOWN = 15, IPOIB_MAX_BACKOFF_SECONDS = 16, diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index b2f42835d76d..951d9abcca8b 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -1486,6 +1486,10 @@ static ssize_t set_mode(struct device *d, struct device_attribute *attr, { struct net_device *dev = to_net_dev(d); int ret; + struct ipoib_dev_priv *priv = netdev_priv(dev); + + if (test_bit(IPOIB_FLAG_GOING_DOWN, &priv->flags)) + return -EPERM; if (!rtnl_trylock()) return restart_syscall(); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 2d7c16346648..0aa52c2f9438 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -2141,6 +2141,9 @@ static void ipoib_remove_one(struct ib_device *device, void *client_data) ib_unregister_event_handler(&priv->event_handler); flush_workqueue(ipoib_workqueue); + /* mark interface in the middle of destruction */ + set_bit(IPOIB_FLAG_GOING_DOWN, &priv->flags); + rtnl_lock(); dev_change_flags(priv->dev, priv->dev->flags & ~IFF_UP); rtnl_unlock(); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c index 64a35595eab8..a2f9f29c6ab5 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c @@ -131,6 +131,9 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) ppriv = netdev_priv(pdev); + if (test_bit(IPOIB_FLAG_GOING_DOWN, &ppriv->flags)) + return -EPERM; + snprintf(intf_name, sizeof intf_name, "%s.%04x", ppriv->dev->name, pkey); priv = ipoib_intf_alloc(intf_name); @@ -183,6 +186,9 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey) ppriv = netdev_priv(pdev); + if (test_bit(IPOIB_FLAG_GOING_DOWN, &ppriv->flags)) + return -EPERM; + if (!rtnl_trylock()) return restart_syscall(); -- cgit v1.2.3 From 8e787646fbce895c20c4433973e90af90e1c6a28 Mon Sep 17 00:00:00 2001 From: Aviv Heller Date: Sat, 4 Jun 2016 15:15:21 +0300 Subject: IB/core: Fix removal of default GID cache entry When deleting a default GID from the cache, its gid_type field is set to 0. This could set the gid_type to RoCE v1 for a RoCE v2 default GID, essentially making it inaccessible to future modifications, since it is no longer found by find_gid(). This fix preserves the gid_type value for default gids during cache operations. Fixes: b39ffa1df505 ('IB/core: Add gid_type to gid attribute') Signed-off-by: Aviv Heller Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/cache.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index c2e257d97eff..040966775f40 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -178,6 +178,7 @@ static int write_gid(struct ib_device *ib_dev, u8 port, { int ret = 0; struct net_device *old_net_dev; + enum ib_gid_type old_gid_type; /* in rdma_cap_roce_gid_table, this funciton should be protected by a * sleep-able lock. @@ -199,6 +200,7 @@ static int write_gid(struct ib_device *ib_dev, u8 port, } old_net_dev = table->data_vec[ix].attr.ndev; + old_gid_type = table->data_vec[ix].attr.gid_type; if (old_net_dev && old_net_dev != attr->ndev) dev_put(old_net_dev); /* if modify_gid failed, just delete the old gid */ @@ -207,10 +209,14 @@ static int write_gid(struct ib_device *ib_dev, u8 port, attr = &zattr; table->data_vec[ix].context = NULL; } - if (default_gid) - table->data_vec[ix].props |= GID_TABLE_ENTRY_DEFAULT; + memcpy(&table->data_vec[ix].gid, gid, sizeof(*gid)); memcpy(&table->data_vec[ix].attr, attr, sizeof(*attr)); + if (default_gid) { + table->data_vec[ix].props |= GID_TABLE_ENTRY_DEFAULT; + if (action == GID_TABLE_WRITE_ACTION_DEL) + table->data_vec[ix].attr.gid_type = old_gid_type; + } if (table->data_vec[ix].attr.ndev && table->data_vec[ix].attr.ndev != old_net_dev) dev_hold(table->data_vec[ix].attr.ndev); -- cgit v1.2.3 From 9b29953bf8ca23944c5e00dcc15ad7bd9fecdd4e Mon Sep 17 00:00:00 2001 From: Mark Bloch Date: Sat, 4 Jun 2016 15:15:22 +0300 Subject: IB/IPoIB: Disable bottom half when dealing with device address Align locking usage when touching device address with rest of the kernel. Lock the bottom half when doing so using netif_addr_lock_bh. This also solves the following case as reported by lockdep: CPU0 CPU1 ---- ---- lock(_xmit_INFINIBAND); local_irq_disable(); lock(&(&mc->mca_lock)->rlock); lock(_xmit_INFINIBAND); lock(&(&mc->mca_lock)->rlock); *** DEADLOCK *** Fixes: 492a7e67ff83 ("IB/IPoIB: Allow setting the device address") Signed-off-by: Mark Bloch Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 8 ++++---- drivers/infiniband/ulp/ipoib/ipoib_main.c | 8 ++++---- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 6 +++--- 3 files changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 45c40a17d6a6..dc6d241b9406 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -1015,7 +1015,7 @@ static bool ipoib_dev_addr_changed_valid(struct ipoib_dev_priv *priv) if (ib_query_gid(priv->ca, priv->port, 0, &gid0, NULL)) return false; - netif_addr_lock(priv->dev); + netif_addr_lock_bh(priv->dev); /* The subnet prefix may have changed, update it now so we won't have * to do it later @@ -1026,12 +1026,12 @@ static bool ipoib_dev_addr_changed_valid(struct ipoib_dev_priv *priv) search_gid.global.interface_id = priv->local_gid.global.interface_id; - netif_addr_unlock(priv->dev); + netif_addr_unlock_bh(priv->dev); err = ib_find_gid(priv->ca, &search_gid, IB_GID_TYPE_IB, priv->dev, &port, &index); - netif_addr_lock(priv->dev); + netif_addr_lock_bh(priv->dev); if (search_gid.global.interface_id != priv->local_gid.global.interface_id) @@ -1092,7 +1092,7 @@ static bool ipoib_dev_addr_changed_valid(struct ipoib_dev_priv *priv) } out: - netif_addr_unlock(priv->dev); + netif_addr_unlock_bh(priv->dev); return ret; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 0aa52c2f9438..248da5015093 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1851,7 +1851,7 @@ static void set_base_guid(struct ipoib_dev_priv *priv, union ib_gid *gid) struct ipoib_dev_priv *child_priv; struct net_device *netdev = priv->dev; - netif_addr_lock(netdev); + netif_addr_lock_bh(netdev); memcpy(&priv->local_gid.global.interface_id, &gid->global.interface_id, @@ -1859,7 +1859,7 @@ static void set_base_guid(struct ipoib_dev_priv *priv, union ib_gid *gid) memcpy(netdev->dev_addr + 4, &priv->local_gid, sizeof(priv->local_gid)); clear_bit(IPOIB_FLAG_DEV_ADDR_SET, &priv->flags); - netif_addr_unlock(netdev); + netif_addr_unlock_bh(netdev); if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) { down_read(&priv->vlan_rwsem); @@ -1875,7 +1875,7 @@ static int ipoib_check_lladdr(struct net_device *dev, union ib_gid *gid = (union ib_gid *)(ss->__data + 4); int ret = 0; - netif_addr_lock(dev); + netif_addr_lock_bh(dev); /* Make sure the QPN, reserved and subnet prefix match the current * lladdr, it also makes sure the lladdr is unicast. @@ -1885,7 +1885,7 @@ static int ipoib_check_lladdr(struct net_device *dev, gid->global.interface_id == 0) ret = -EINVAL; - netif_addr_unlock(dev); + netif_addr_unlock_bh(dev); return ret; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 82fbc9442608..d3394b6add24 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -582,13 +582,13 @@ void ipoib_mcast_join_task(struct work_struct *work) return; } priv->local_lid = port_attr.lid; - netif_addr_lock(dev); + netif_addr_lock_bh(dev); if (!test_bit(IPOIB_FLAG_DEV_ADDR_SET, &priv->flags)) { - netif_addr_unlock(dev); + netif_addr_unlock_bh(dev); return; } - netif_addr_unlock(dev); + netif_addr_unlock_bh(dev); spin_lock_irq(&priv->lock); if (!test_bit(IPOIB_FLAG_OPER_UP, &priv->flags)) -- cgit v1.2.3 From 8aec013afe6d9665eb478396026ebd4384dbe934 Mon Sep 17 00:00:00 2001 From: Mark Bloch Date: Sat, 4 Jun 2016 15:15:24 +0300 Subject: IB/core: Initialize sysfs attributes before sysfs create group For dynamically allocated sysfs attributes there is a need to call sysfs_attr_init in order to comply with lockdep, not calling it will result in error complaining key is not in .data section. Fixes: b40f4757daa1 ("IB/core: Make device counter infrastructure dynamic") Signed-off-by: Mark Bloch Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/sysfs.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 35d0d47e6f8c..a5793c8f1590 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -925,10 +925,13 @@ static void setup_hw_stats(struct ib_device *device, struct ib_port *port, hsag->attrs[i] = alloc_hsa(i, port_num, stats->names[i]); if (!hsag->attrs[i]) goto err; + sysfs_attr_init(hsag->attrs[i]); } /* treat an error here as non-fatal */ hsag->attrs[i] = alloc_hsa_lifespan("lifespan", port_num); + if (hsag->attrs[i]) + sysfs_attr_init(hsag->attrs[i]); if (port) { struct kobject *kobj = &port->kobj; -- cgit v1.2.3 From da6d6ba3c6f085abf82723612efd746a97f8e414 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Sat, 4 Jun 2016 15:15:28 +0300 Subject: IB/mlx5: Set flow steering capability bit Flow steering is supported by mlx5 device when the following features are supported by firmware: 1. NIC RX flow table. 2. Device has enough flow steering levels. 3. Atomic modification of flow table entry. 4. Flow tables chaining. To check if flow steering is supported it's enough to check if the driver opened the mlx5 bypass namespace. Signed-off-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index c72797cd9e4f..83047ef1394c 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -524,6 +524,9 @@ static int mlx5_ib_query_device(struct ib_device *ibdev, MLX5_CAP_ETH(dev->mdev, scatter_fcs)) props->device_cap_flags |= IB_DEVICE_RAW_SCATTER_FCS; + if (mlx5_get_flow_namespace(dev->mdev, MLX5_FLOW_NAMESPACE_BYPASS)) + props->device_cap_flags |= IB_DEVICE_MANAGED_FLOW_STEERING; + props->vendor_part_id = mdev->pdev->device; props->hw_ver = mdev->pdev->revision; -- cgit v1.2.3 From 2788cf3bd90af3791c3195c52391bcf34fa67b40 Mon Sep 17 00:00:00 2001 From: Noa Osherovich Date: Sat, 4 Jun 2016 15:15:29 +0300 Subject: IB/mlx5: Return PORT_ERR in Active to Initializing tranisition FW port-change events are fired on Active <-> non Active port state transitions only. When the port state changes from Active to Initializing (Active -> Down -> Initializing), a single event is fired. The HCA transitions from Down to Initializing unless prevented from doing so, hence the driver should also propagate events when the port state is Initializing to consumers so they'll be aware that the port is no longer Active and act accordingly. Fixes: e126ba97dba9e ('mlx5: Add driver for Mellanox Connect-IB...') Signed-off-by: Noa Osherovich Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 83047ef1394c..94a8f914b237 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -1869,14 +1869,11 @@ static void mlx5_ib_event(struct mlx5_core_dev *dev, void *context, break; case MLX5_DEV_EVENT_PORT_DOWN: + case MLX5_DEV_EVENT_PORT_INITIALIZED: ibev.event = IB_EVENT_PORT_ERR; port = (u8)param; break; - case MLX5_DEV_EVENT_PORT_INITIALIZED: - /* not used by ULPs */ - return; - case MLX5_DEV_EVENT_LID_CHANGE: ibev.event = IB_EVENT_LID_CHANGE; port = (u8)param; -- cgit v1.2.3 From c0fcebf55289c48148992eee002a7caf853a5358 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Sat, 4 Jun 2016 15:15:30 +0300 Subject: IB/mlx5: Fix FW version diaplay in sysfs Add a 4-digit padding to show FW version in proper format. Fixes: 9603b61de1eee ('mlx5: Move pci device handling from...') Signed-off-by: Eran Ben Elisha Signed-off-by: Noa Osherovich Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 94a8f914b237..8845f4b9621b 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -1801,7 +1801,7 @@ static ssize_t show_fw_ver(struct device *device, struct device_attribute *attr, { struct mlx5_ib_dev *dev = container_of(device, struct mlx5_ib_dev, ib_dev.dev); - return sprintf(buf, "%d.%d.%d\n", fw_rev_maj(dev->mdev), + return sprintf(buf, "%d.%d.%04d\n", fw_rev_maj(dev->mdev), fw_rev_min(dev->mdev), fw_rev_sub(dev->mdev)); } -- cgit v1.2.3 From bc5c6eed0510f19b033ce7a7d3976e695e96785b Mon Sep 17 00:00:00 2001 From: Noa Osherovich Date: Sat, 4 Jun 2016 15:15:31 +0300 Subject: IB/mlx5: Limit query HCA clock When PAGE_SIZE is larger than 4K, the user shouldn't be able to query the HCA core clock. This counter is within 4KB boundary and the user-space shall not read information that's after this boundary. Fixes: b368d7cb8ceb7 ('IB/mlx5: Add hca_core_clock_offset to...') Signed-off-by: Majd Dibbiny Signed-off-by: Noa Osherovich Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 8845f4b9621b..05036dbb9804 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -991,7 +991,14 @@ static struct ib_ucontext *mlx5_ib_alloc_ucontext(struct ib_device *ibdev, if (field_avail(typeof(resp), cqe_version, udata->outlen)) resp.response_length += sizeof(resp.cqe_version); - if (field_avail(typeof(resp), hca_core_clock_offset, udata->outlen)) { + /* + * We don't want to expose information from the PCI bar that is located + * after 4096 bytes, so if the arch only supports larger pages, let's + * pretend we don't support reading the HCA's core clock. This is also + * forced by mmap function. + */ + if (PAGE_SIZE <= 4096 && + field_avail(typeof(resp), hca_core_clock_offset, udata->outlen)) { resp.comp_mask |= MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_CORE_CLOCK_OFFSET; resp.hca_core_clock_offset = -- cgit v1.2.3 From 0540d8148d419bf769e5aa99c77027febd8922f0 Mon Sep 17 00:00:00 2001 From: Noa Osherovich Date: Sat, 4 Jun 2016 15:15:32 +0300 Subject: IB/mlx5: Fix returned values of query QP Some variables were not initialized properly: max_recv_wr, max_recv_sge, max_send_wr, qp_context and max_inline_data. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB...') Signed-off-by: Noa Osherovich Signed-off-by: Leon Romanovsky Reviewed-by: Sagi Grimberg Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/qp.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 504117657d41..43c1441b6fb8 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -235,6 +235,8 @@ static int set_rq_size(struct mlx5_ib_dev *dev, struct ib_qp_cap *cap, qp->rq.max_gs = 0; qp->rq.wqe_cnt = 0; qp->rq.wqe_shift = 0; + cap->max_recv_wr = 0; + cap->max_recv_sge = 0; } else { if (ucmd) { qp->rq.wqe_cnt = ucmd->rq_wqe_count; @@ -4079,17 +4081,19 @@ int mlx5_ib_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr, qp_attr->cap.max_recv_sge = qp->rq.max_gs; if (!ibqp->uobject) { - qp_attr->cap.max_send_wr = qp->sq.wqe_cnt; + qp_attr->cap.max_send_wr = qp->sq.max_post; qp_attr->cap.max_send_sge = qp->sq.max_gs; + qp_init_attr->qp_context = ibqp->qp_context; } else { qp_attr->cap.max_send_wr = 0; qp_attr->cap.max_send_sge = 0; } - /* We don't support inline sends for kernel QPs (yet), and we - * don't know what userspace's value should be. - */ - qp_attr->cap.max_inline_data = 0; + qp_init_attr->qp_type = ibqp->qp_type; + qp_init_attr->recv_cq = ibqp->recv_cq; + qp_init_attr->send_cq = ibqp->send_cq; + qp_init_attr->srq = ibqp->srq; + qp_attr->cap.max_inline_data = qp->max_inline_data; qp_init_attr->cap = qp_attr->cap; -- cgit v1.2.3 From 2cc6ad5f2130733e561f97dba7a2052f8ea024aa Mon Sep 17 00:00:00 2001 From: Noa Osherovich Date: Sat, 4 Jun 2016 15:15:33 +0300 Subject: IB/mlx5: Check BlueFlame HCA support BlueFlame support is reported only for PFs when the HCA capability is on. Fixes: 938fe83c8dcbb ('net/mlx5_core: New device capabilities...') Signed-off-by: Majd Dibbiny Signed-off-by: Noa Osherovich Signed-off-by: Leon Romanovsky Reviewed-by: Sagi Grimberg Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 05036dbb9804..b48ad85315dc 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -918,7 +918,8 @@ static struct ib_ucontext *mlx5_ib_alloc_ucontext(struct ib_device *ibdev, num_uars = req.total_num_uuars / MLX5_NON_FP_BF_REGS_PER_PAGE; gross_uuars = num_uars * MLX5_BF_REGS_PER_PAGE; resp.qp_tab_size = 1 << MLX5_CAP_GEN(dev->mdev, log_max_qp); - resp.bf_reg_size = 1 << MLX5_CAP_GEN(dev->mdev, log_bf_reg_size); + if (mlx5_core_is_pf(dev->mdev) && MLX5_CAP_GEN(dev->mdev, bf)) + resp.bf_reg_size = 1 << MLX5_CAP_GEN(dev->mdev, log_bf_reg_size); resp.cache_line_size = L1_CACHE_BYTES; resp.max_sq_desc_sz = MLX5_CAP_GEN(dev->mdev, max_wqe_sz_sq); resp.max_rq_desc_sz = MLX5_CAP_GEN(dev->mdev, max_wqe_sz_rq); -- cgit v1.2.3 From 9ea578528656e191c1097798a771ff08bab6f323 Mon Sep 17 00:00:00 2001 From: Noa Osherovich Date: Sat, 4 Jun 2016 15:15:34 +0300 Subject: IB/mlx5: Fix entries checks in mlx5_ib_create_cq Number of entries shouldn't be greater than the device's max capability. This should be checked before rounding the entries number to power of two. Fixes: 51ee86a4af639 ('IB/mlx5: Fix check of number of entries...') Signed-off-by: Majd Dibbiny Signed-off-by: Noa Osherovich Signed-off-by: Leon Romanovsky Reviewed-by: Sagi Grimberg Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/cq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/cq.c b/drivers/infiniband/hw/mlx5/cq.c index dabcc65bd65e..3984c68caae1 100644 --- a/drivers/infiniband/hw/mlx5/cq.c +++ b/drivers/infiniband/hw/mlx5/cq.c @@ -822,7 +822,8 @@ struct ib_cq *mlx5_ib_create_cq(struct ib_device *ibdev, int eqn; int err; - if (entries < 0) + if (entries < 0 || + (entries > (1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz)))) return ERR_PTR(-EINVAL); if (check_cq_create_flags(attr->flags)) -- cgit v1.2.3 From 3c4c37746c919c983e439ac6a7328cd2d48c10ed Mon Sep 17 00:00:00 2001 From: Noa Osherovich Date: Sat, 4 Jun 2016 15:15:35 +0300 Subject: IB/mlx5: Fix entries check in mlx5_ib_resize_cq Verify that number of entries is less than device capability. Add an appropriate warning message for error flow. Fixes: bde51583f49b ('IB/mlx5: Add support for resize CQ') Signed-off-by: Majd Dibbiny Signed-off-by: Noa Osherovich Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/cq.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/cq.c b/drivers/infiniband/hw/mlx5/cq.c index 3984c68caae1..9c0e67bd2ba7 100644 --- a/drivers/infiniband/hw/mlx5/cq.c +++ b/drivers/infiniband/hw/mlx5/cq.c @@ -1169,11 +1169,16 @@ int mlx5_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata) return -ENOSYS; } - if (entries < 1) + if (entries < 1 || + entries > (1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz))) { + mlx5_ib_warn(dev, "wrong entries number %d, max %d\n", + entries, + 1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz)); return -EINVAL; + } entries = roundup_pow_of_two(entries + 1); - if (entries > (1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz)) + 1) + if (entries > (1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz)) + 1) return -EINVAL; if (entries == ibcq->cqe + 1) -- cgit v1.2.3 From d3ae2bdeba9bad8cb95301451aeaf03ce31e82f0 Mon Sep 17 00:00:00 2001 From: Noa Osherovich Date: Sat, 4 Jun 2016 15:15:36 +0300 Subject: IB/mlx5: Fix pkey_index length in the QP path record Pkey index fields in the QP context path record are extended to 16 bits, as required by IB spec (version 1.3). This change affects all QP commands which include path records. To enable this change, moved the free adaptive routing flag bit (free_ar) to the most significant byte of the QP path record. Fixes: e126ba97dba9e ('mlx5: Add driver for Mellanox Connect-IB ...') Signed-off-by: Noa Osherovich Reviewed-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/qp.c | 15 ++++++++------- include/linux/mlx5/qp.h | 5 ++--- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 43c1441b6fb8..6b90bfdea830 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -1859,7 +1859,7 @@ static int mlx5_set_path(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp, int err; if (attr_mask & IB_QP_PKEY_INDEX) - path->pkey_index = attr->pkey_index; + path->pkey_index = cpu_to_be16(attr->pkey_index); if (ah->ah_flags & IB_AH_GRH) { if (ah->grh.sgid_index >= @@ -1879,9 +1879,9 @@ static int mlx5_set_path(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp, ah->grh.sgid_index); path->dci_cfi_prio_sl = (ah->sl & 0x7) << 4; } else { - path->fl = (path_flags & MLX5_PATH_FLAG_FL) ? 0x80 : 0; - path->free_ar = (path_flags & MLX5_PATH_FLAG_FREE_AR) ? 0x80 : - 0; + path->fl_free_ar = (path_flags & MLX5_PATH_FLAG_FL) ? 0x80 : 0; + path->fl_free_ar |= + (path_flags & MLX5_PATH_FLAG_FREE_AR) ? 0x40 : 0; path->rlid = cpu_to_be16(ah->dlid); path->grh_mlid = ah->src_path_bits & 0x7f; if (ah->ah_flags & IB_AH_GRH) @@ -2266,7 +2266,7 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp, context->log_pg_sz_remote_qpn = cpu_to_be32(attr->dest_qp_num); if (attr_mask & IB_QP_PKEY_INDEX) - context->pri_path.pkey_index = attr->pkey_index; + context->pri_path.pkey_index = cpu_to_be16(attr->pkey_index); /* todo implement counter_index functionality */ @@ -4015,11 +4015,12 @@ static int query_qp_attr(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp, if (qp->ibqp.qp_type == IB_QPT_RC || qp->ibqp.qp_type == IB_QPT_UC) { to_ib_ah_attr(dev, &qp_attr->ah_attr, &context->pri_path); to_ib_ah_attr(dev, &qp_attr->alt_ah_attr, &context->alt_path); - qp_attr->alt_pkey_index = context->alt_path.pkey_index & 0x7f; + qp_attr->alt_pkey_index = + be16_to_cpu(context->alt_path.pkey_index); qp_attr->alt_port_num = qp_attr->alt_ah_attr.port_num; } - qp_attr->pkey_index = context->pri_path.pkey_index & 0x7f; + qp_attr->pkey_index = be16_to_cpu(context->pri_path.pkey_index); qp_attr->port_num = context->pri_path.port; /* qp_attr->en_sqd_async_notify is only applicable in modify qp */ diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h index 64221027bf1f..e4e29882fdfd 100644 --- a/include/linux/mlx5/qp.h +++ b/include/linux/mlx5/qp.h @@ -460,10 +460,9 @@ struct mlx5_core_qp { }; struct mlx5_qp_path { - u8 fl; + u8 fl_free_ar; u8 rsvd3; - u8 free_ar; - u8 pkey_index; + __be16 pkey_index; u8 rsvd0; u8 grh_mlid; __be16 rlid; -- cgit v1.2.3 From f879ee8d900fc78b5bc5d840edd9ecb57d02ab7e Mon Sep 17 00:00:00 2001 From: Achiad Shochat Date: Sat, 4 Jun 2016 15:15:37 +0300 Subject: IB/mlx5: Fix alternate path code Userspace flag IBV_QP_ALT_PATH is supposed to set the alternate path including fields alt_pkey_index and alt_timeout. Added IB_QP_PKEY_INDEX and IB_QP_TIMEOUT to the attribute mask when calling mlx5_set_path for the alternate path to force setting the alt_pkey_index and alt_timeout values. Fixes: bf24481a3a7c4 ('IB/mlx5: Consider alternate path in pkey ...') Signed-off-by: Achiad Shochat Signed-off-by: Noa Osherovich Reviewed-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/qp.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 6b90bfdea830..ce434228a5ea 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -1853,13 +1853,15 @@ static int modify_raw_packet_eth_prio(struct mlx5_core_dev *dev, static int mlx5_set_path(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp, const struct ib_ah_attr *ah, struct mlx5_qp_path *path, u8 port, int attr_mask, - u32 path_flags, const struct ib_qp_attr *attr) + u32 path_flags, const struct ib_qp_attr *attr, + bool alt) { enum rdma_link_layer ll = rdma_port_get_link_layer(&dev->ib_dev, port); int err; if (attr_mask & IB_QP_PKEY_INDEX) - path->pkey_index = cpu_to_be16(attr->pkey_index); + path->pkey_index = cpu_to_be16(alt ? attr->alt_pkey_index : + attr->pkey_index); if (ah->ah_flags & IB_AH_GRH) { if (ah->grh.sgid_index >= @@ -1905,7 +1907,7 @@ static int mlx5_set_path(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp, path->port = port; if (attr_mask & IB_QP_TIMEOUT) - path->ackto_lt = attr->timeout << 3; + path->ackto_lt = (alt ? attr->alt_timeout : attr->timeout) << 3; if ((qp->ibqp.qp_type == IB_QPT_RAW_PACKET) && qp->sq.wqe_cnt) return modify_raw_packet_eth_prio(dev->mdev, @@ -2279,7 +2281,7 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp, if (attr_mask & IB_QP_AV) { err = mlx5_set_path(dev, qp, &attr->ah_attr, &context->pri_path, attr_mask & IB_QP_PORT ? attr->port_num : qp->port, - attr_mask, 0, attr); + attr_mask, 0, attr, false); if (err) goto out; } @@ -2290,7 +2292,9 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp, if (attr_mask & IB_QP_ALT_PATH) { err = mlx5_set_path(dev, qp, &attr->alt_ah_attr, &context->alt_path, - attr->alt_port_num, attr_mask, 0, attr); + attr->alt_port_num, + attr_mask | IB_QP_PKEY_INDEX | IB_QP_TIMEOUT, + 0, attr, true); if (err) goto out; } -- cgit v1.2.3 From 61c78eea9516a921799c17b4c20558e2aa780fd3 Mon Sep 17 00:00:00 2001 From: Erez Shitrit Date: Sat, 4 Jun 2016 15:15:19 +0300 Subject: IB/IPoIB: Don't update neigh validity for unresolved entries ipoib_neigh_get unconditionally updates the "alive" variable member on any packet send. This prevents the neighbor garbage collection from cleaning out a dead neighbor entry if we are still queueing packets for it. If the queue for this neighbor is full, then don't update the alive timestamp. That way the neighbor can time out even if packets are still being queued as long as none of them are being sent. Fixes: b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path") Signed-off-by: Erez Shitrit Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 248da5015093..5f58c41ef787 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1206,7 +1206,9 @@ struct ipoib_neigh *ipoib_neigh_get(struct net_device *dev, u8 *daddr) neigh = NULL; goto out_unlock; } - neigh->alive = jiffies; + + if (likely(skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE)) + neigh->alive = jiffies; goto out_unlock; } } -- cgit v1.2.3 From b9a8460a08a1e0150073cda3e7a0dd23cb888052 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 6 Jun 2016 02:37:14 -0400 Subject: bnxt_en: Fix tx push race condition. Set the is_push flag in the software BD before the tx data is pushed to the chip. It is possible to get the tx interrupt as soon as the tx data is pushed. The tx handler will not handle the event properly if the is_push flag is not set and it will crash. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 72a2efff8e49..4615ed4311e8 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -286,7 +286,9 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev) cpu_to_le32(DB_KEY_TX_PUSH | DB_LONG_TX_PUSH | prod); txr->tx_prod = prod; + tx_buf->is_push = 1; netdev_tx_sent_queue(txq, skb->len); + wmb(); /* Sync is_push and byte queue before pushing data */ push_len = (length + sizeof(*tx_push) + 7) / 8; if (push_len > 16) { @@ -298,7 +300,6 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev) push_len); } - tx_buf->is_push = 1; goto tx_done; } -- cgit v1.2.3 From 5a9f6b238e59bc05afb4cdeaf3672990bf2a5309 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 6 Jun 2016 02:37:15 -0400 Subject: bnxt_en: Enable and disable RX CTAG and RX STAG VLAN acceleration together. The hardware can only be set to strip or not strip both the VLAN CTAG and STAG. It cannot strip one and not strip the other. Add logic to bnxt_fix_features() to toggle both feature flags when the user is toggling one of them. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 4615ed4311e8..ae2b2646604a 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -5467,6 +5467,20 @@ static netdev_features_t bnxt_fix_features(struct net_device *dev, if (!bnxt_rfs_capable(bp)) features &= ~NETIF_F_NTUPLE; + + /* Both CTAG and STAG VLAN accelaration on the RX side have to be + * turned on or off together. + */ + if ((features & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX)) != + (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX)) { + if (dev->features & NETIF_F_HW_VLAN_CTAG_RX) + features &= ~(NETIF_F_HW_VLAN_CTAG_RX | + NETIF_F_HW_VLAN_STAG_RX); + else + features |= NETIF_F_HW_VLAN_CTAG_RX | + NETIF_F_HW_VLAN_STAG_RX; + } + return features; } -- cgit v1.2.3 From 8852ddb4dcdfe6f877a02f79bf2bca9ae63c039a Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 6 Jun 2016 02:37:16 -0400 Subject: bnxt_en: Simplify VLAN receive logic. Since both CTAG and STAG rx acceleration must be enabled together, we only need to check one feature flag (NETIF_F_HW_VLAN_CTAG_RX) before calling __vlan_hwaccel_put_tag(). Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 29 +++++++++-------------------- 1 file changed, 9 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index ae2b2646604a..c777cde85ce4 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1113,19 +1113,13 @@ static inline struct sk_buff *bnxt_tpa_end(struct bnxt *bp, if (tpa_info->hash_type != PKT_HASH_TYPE_NONE) skb_set_hash(skb, tpa_info->rss_hash, tpa_info->hash_type); - if (tpa_info->flags2 & RX_CMP_FLAGS2_META_FORMAT_VLAN) { - netdev_features_t features = skb->dev->features; + if ((tpa_info->flags2 & RX_CMP_FLAGS2_META_FORMAT_VLAN) && + (skb->dev->features & NETIF_F_HW_VLAN_CTAG_RX)) { u16 vlan_proto = tpa_info->metadata >> RX_CMP_FLAGS2_METADATA_TPID_SFT; + u16 vtag = tpa_info->metadata & RX_CMP_FLAGS2_METADATA_VID_MASK; - if (((features & NETIF_F_HW_VLAN_CTAG_RX) && - vlan_proto == ETH_P_8021Q) || - ((features & NETIF_F_HW_VLAN_STAG_RX) && - vlan_proto == ETH_P_8021AD)) { - __vlan_hwaccel_put_tag(skb, htons(vlan_proto), - tpa_info->metadata & - RX_CMP_FLAGS2_METADATA_VID_MASK); - } + __vlan_hwaccel_put_tag(skb, htons(vlan_proto), vtag); } skb_checksum_none_assert(skb); @@ -1278,19 +1272,14 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_napi *bnapi, u32 *raw_cons, skb->protocol = eth_type_trans(skb, dev); - if (rxcmp1->rx_cmp_flags2 & - cpu_to_le32(RX_CMP_FLAGS2_META_FORMAT_VLAN)) { - netdev_features_t features = skb->dev->features; + if ((rxcmp1->rx_cmp_flags2 & + cpu_to_le32(RX_CMP_FLAGS2_META_FORMAT_VLAN)) && + (skb->dev->features & NETIF_F_HW_VLAN_CTAG_RX)) { u32 meta_data = le32_to_cpu(rxcmp1->rx_cmp_meta_data); + u16 vtag = meta_data & RX_CMP_FLAGS2_METADATA_VID_MASK; u16 vlan_proto = meta_data >> RX_CMP_FLAGS2_METADATA_TPID_SFT; - if (((features & NETIF_F_HW_VLAN_CTAG_RX) && - vlan_proto == ETH_P_8021Q) || - ((features & NETIF_F_HW_VLAN_STAG_RX) && - vlan_proto == ETH_P_8021AD)) - __vlan_hwaccel_put_tag(skb, htons(vlan_proto), - meta_data & - RX_CMP_FLAGS2_METADATA_VID_MASK); + __vlan_hwaccel_put_tag(skb, htons(vlan_proto), vtag); } skb_checksum_none_assert(skb); -- cgit v1.2.3 From 9f647a6de9926f4844feb8c5e21c78d4e61c55ab Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 6 Jun 2016 09:21:44 +0100 Subject: net: fec: fix spelling mistakes and add missing newline trivial fix to spelling mistakes and add missing newline in pr_err messages Signed-off-by: Colin Ian King Acked-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 3c0255e98535..fea0f330ddbd 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -2416,24 +2416,24 @@ fec_enet_set_coalesce(struct net_device *ndev, struct ethtool_coalesce *ec) return -EOPNOTSUPP; if (ec->rx_max_coalesced_frames > 255) { - pr_err("Rx coalesced frames exceed hardware limiation"); + pr_err("Rx coalesced frames exceed hardware limitation\n"); return -EINVAL; } if (ec->tx_max_coalesced_frames > 255) { - pr_err("Tx coalesced frame exceed hardware limiation"); + pr_err("Tx coalesced frame exceed hardware limitation\n"); return -EINVAL; } cycle = fec_enet_us_to_itr_clock(ndev, fep->rx_time_itr); if (cycle > 0xFFFF) { - pr_err("Rx coalesed usec exceeed hardware limiation"); + pr_err("Rx coalesced usec exceed hardware limitation\n"); return -EINVAL; } cycle = fec_enet_us_to_itr_clock(ndev, fep->tx_time_itr); if (cycle > 0xFFFF) { - pr_err("Rx coalesed usec exceeed hardware limiation"); + pr_err("Rx coalesced usec exceed hardware limitation\n"); return -EINVAL; } -- cgit v1.2.3 From 2c2c1af4497514da1be2b571066859701dd79231 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 7 Jun 2016 17:38:52 -0700 Subject: cpufreq: intel_pstate: Fix code ordering in intel_pstate_set_policy() The limits->max_perf is rounded_up but immediately overwritten by another assignment to limits->max_perf. Move that operation to the correct location. While here also added a pr_debug() call in ->set_policy to aid in debugging. Fixes: 785ee2788141 (cpufreq: intel_pstate: Fix limits->max_perf rounding error) Signed-off-by: Srinivas Pandruvada [ rjw : Subject & changelog ] Cc: 4.4+ # 4.4+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 0d159b513469..724b9056aa6b 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -1460,6 +1460,9 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) intel_pstate_clear_update_util_hook(policy->cpu); + pr_debug("set_policy cpuinfo.max %u policy->max %u\n", + policy->cpuinfo.max_freq, policy->max); + cpu = all_cpu_data[0]; if (cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate && policy->max < policy->cpuinfo.max_freq && @@ -1495,13 +1498,13 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) limits->max_sysfs_pct); limits->max_perf_pct = max(limits->min_policy_pct, limits->max_perf_pct); - limits->max_perf = round_up(limits->max_perf, FRAC_BITS); /* Make sure min_perf_pct <= max_perf_pct */ limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct); limits->min_perf = div_fp(limits->min_perf_pct, 100); limits->max_perf = div_fp(limits->max_perf_pct, 100); + limits->max_perf = round_up(limits->max_perf, FRAC_BITS); out: intel_pstate_set_update_util_hook(policy->cpu); -- cgit v1.2.3 From 983e600e88835f0321d1a0ea06f52d48b7b5a544 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 7 Jun 2016 17:38:53 -0700 Subject: cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo When turbo is disabled, the ->set_policy() interface is broken. For example, when turbo is disabled and cpuinfo.max = 2900000 (full max turbo frequency), setting the limits results in frequency less than the requested one: Set 1000000 KHz results in 0700000 KHz Set 1500000 KHz results in 1100000 KHz Set 2000000 KHz results in 1500000 KHz This is because the limits->max_perf fraction is calculated using the max turbo frequency as the reference, but when the max P-State is capped in intel_pstate_get_min_max(), the reference is not the max turbo P-State. This results in reducing max P-State. One option is to always use max turbo as reference for calculating limits. But this will not be correct. By definition the intel_pstate sysfs limits, shows percentage of available performance. So when BIOS has disabled turbo, the available performance is max non turbo. So the max_perf_pct should still show 100%. Signed-off-by: Srinivas Pandruvada [ rjw : Subject & changelog, rewrite in fewer lines of code ] Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 724b9056aa6b..ee367e9b7d2e 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -1561,8 +1561,11 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy) /* cpuinfo and default policy values */ policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling; - policy->cpuinfo.max_freq = - cpu->pstate.turbo_pstate * cpu->pstate.scaling; + update_turbo_state(); + policy->cpuinfo.max_freq = limits->turbo_disabled ? + cpu->pstate.max_pstate : cpu->pstate.turbo_pstate; + policy->cpuinfo.max_freq *= cpu->pstate.scaling; + intel_pstate_init_acpi_perf_limits(policy); policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; cpumask_set_cpu(policy->cpu, policy->cpus); -- cgit v1.2.3 From 7be4881846cfa67f968eaf5b7b50d9623a652afb Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 1 Jun 2016 11:36:13 +0200 Subject: hwmon: (fam15h_power) Disable preemption when reading registers We need to read a bunch of registers on each compute unit and possibly on the current CPU too. Disable preemption around it. Otherwise, you get: BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/327 caller is read_registers+0x6a/0x110 [fam15h_power] CPU: 3 PID: 327 Comm: systemd-udevd Not tainted 4.7.0-rc1+ #4 Hardware name: HP HP EliteBook 745 G3/807E, BIOS N73 Ver. 01.08 01/28/2016 ... Suggested-by: Thomas Gleixner Signed-off-by: Borislav Petkov Cc: Rui Huang Cc: Sherry Hurwitz Cc: Guenter Roeck Acked-by: Huang Rui Tested-by: Huang Rui Fixes: fa7943449943 ("hwmon: (fam15h_power) Add compute unit accumulated power") Signed-off-by: Guenter Roeck --- drivers/hwmon/fam15h_power.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c index eb97a9241d17..15aa49d082c4 100644 --- a/drivers/hwmon/fam15h_power.c +++ b/drivers/hwmon/fam15h_power.c @@ -172,9 +172,9 @@ static void do_read_registers_on_cu(void *_data) */ static int read_registers(struct fam15h_power_data *data) { - int this_cpu, ret, cpu; int core, this_core; cpumask_var_t mask; + int ret, cpu; ret = zalloc_cpumask_var(&mask, GFP_KERNEL); if (!ret) @@ -183,7 +183,6 @@ static int read_registers(struct fam15h_power_data *data) memset(data->cu_on, 0, sizeof(int) * MAX_CUS); get_online_cpus(); - this_cpu = smp_processor_id(); /* * Choose the first online core of each compute unit, and then @@ -205,12 +204,9 @@ static int read_registers(struct fam15h_power_data *data) cpumask_set_cpu(cpumask_any(topology_sibling_cpumask(cpu)), mask); } - if (cpumask_test_cpu(this_cpu, mask)) - do_read_registers_on_cu(data); + on_each_cpu_mask(mask, do_read_registers_on_cu, data, true); - smp_call_function_many(mask, do_read_registers_on_cu, data, true); put_online_cpus(); - free_cpumask_var(mask); return 0; -- cgit v1.2.3 From 38bab98a8da4a2ff5c3f55b045b0c8bf6901362f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 5 Jun 2016 09:35:43 +0200 Subject: hwmon: (lm90) use proper type for update_interval The code handles this variable always as unsigned, so adapt the type. Signed-off-by: Wolfram Sang Signed-off-by: Guenter Roeck --- drivers/hwmon/lm90.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index c9ff08dbe10c..e30a5939dc0d 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -375,7 +375,7 @@ struct lm90_data { int kind; u32 flags; - int update_interval; /* in milliseconds */ + unsigned int update_interval; /* in milliseconds */ u8 config_orig; /* Original configuration register value */ u8 convrate_orig; /* Original conversion rate register value */ -- cgit v1.2.3 From c66f59ee5050447b3da92d36f5385a847990a894 Mon Sep 17 00:00:00 2001 From: Michał Pecio Date: Tue, 7 Jun 2016 12:34:45 +0200 Subject: USB: OHCI: Don't mark EDs as ED_OPER if scheduling fails Since ed_schedule begins with marking the ED as "operational", the ED may be left in such state even if scheduling actually fails. This allows future submission attempts to smuggle this ED to the hardware behind the scheduler's back and without linking it to the ohci->eds_in_use list. The former causes bandwidth saturation and data loss on isoc endpoints, the latter crashes the kernel when attempt is made to unlink such ED from this list. Fix ed_schedule to update ED state only on successful return. Signed-off-by: Michal Pecio Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-q.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index d029bbe9eb36..641fed609911 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -183,7 +183,6 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed) { int branch; - ed->state = ED_OPER; ed->ed_prev = NULL; ed->ed_next = NULL; ed->hwNextED = 0; @@ -259,6 +258,8 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed) /* the HC may not see the schedule updates yet, but if it does * then they'll be properly ordered. */ + + ed->state = ED_OPER; return 0; } -- cgit v1.2.3 From dcb21ad4385731b7fc3ef39d255685f2f63c8c5d Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 30 May 2016 19:16:33 +0530 Subject: USB: mos7720: delete parport parport subsystem has introduced parport_del_port() to delete a port when it is going away. Without parport_del_port() the registered port will not be unregistered. To reproduce and verify the error: Command to be used is : ls /sys/bus/parport/devices 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and the command still shows "parport0". 4) Attach the device again and we get "parport1". With the patch applied: 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and there is no output as "parport0" is now removed. 4) Attach device again to get "parport0" again. Cc: # 4.2+ Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7720.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 2eddbe538cda..5608af4a369d 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -2007,6 +2007,7 @@ static void mos7720_release(struct usb_serial *serial) urblist_entry) usb_unlink_urb(urbtrack->urb); spin_unlock_irqrestore(&mos_parport->listlock, flags); + parport_del_port(mos_parport->pp); kref_put(&mos_parport->ref_count, destroy_mos_parport); } -- cgit v1.2.3 From f8a15a9650694feaa0dabf197b0c94d37cd3fb42 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 26 May 2016 17:23:29 +0200 Subject: usb: host: ehci-tegra: Grab the correct UTMI pads reset There are three EHCI controllers on Tegra SoCs, each with its own reset line. However, the first controller contains a set of UTMI configuration registers that are shared with its siblings. These registers will only be reset as part of the first controller's reset. For proper operation it must be ensured that the UTMI configuration registers are reset before any of the EHCI controllers are enabled, irrespective of the probe order. Commit a47cc24cd1e5 ("USB: EHCI: tegra: Fix probe order issue leading to broken USB") introduced code that ensures the first controller is always reset before setting up any of the controllers, and is never again reset afterwards. This code, however, grabs the wrong reset. Each EHCI controller has two reset controls attached: 1) the USB controller reset and 2) the UTMI pads reset (really the first controller's reset). In order to reset the UTMI pads registers the code must grab the second reset, but instead it grabbing the first. Fixes: a47cc24cd1e5 ("USB: EHCI: tegra: Fix probe order issue leading to broken USB") Acked-by: Jon Hunter Cc: stable@vger.kernel.org Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 4031b372008e..c1c1024a054c 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -89,7 +89,7 @@ static int tegra_reset_usb_controller(struct platform_device *pdev) if (!usb1_reset_attempted) { struct reset_control *usb1_reset; - usb1_reset = of_reset_control_get(phy_np, "usb"); + usb1_reset = of_reset_control_get(phy_np, "utmi-pads"); if (IS_ERR(usb1_reset)) { dev_warn(&pdev->dev, "can't get utmi-pads reset from the PHY\n"); -- cgit v1.2.3 From 7cc9ca5a994c90fa771135e50b7a9cb99a65aa1d Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 26 May 2016 17:23:30 +0200 Subject: usb: host: ehci-tegra: Avoid getting the same reset twice Starting with commit 0b52297f2288 ("reset: Add support for shared reset controls") there is a reference count for reset control assertions. The goal is to allow resets to be shared by multiple devices and an assert will take effect only when all instances have asserted the reset. In order to preserve backwards-compatibility, all reset controls become exclusive by default. This is to ensure that reset_control_assert() can immediately assert in hardware. However, this new behaviour triggers the following warning in the EHCI driver for Tegra: [ 3.365019] ------------[ cut here ]------------ [ 3.369639] WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x16c/0x23c [ 3.382151] Modules linked in: [ 3.385214] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-next-20160503 #140 [ 3.392769] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 3.399046] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 3.406787] [] (show_stack) from [] (dump_stack+0x90/0xa4) [ 3.414007] [] (dump_stack) from [] (__warn+0xe8/0x100) [ 3.420964] [] (__warn) from [] (warn_slowpath_null+0x20/0x28) [ 3.428525] [] (warn_slowpath_null) from [] (__of_reset_control_get+0x16c/0x23c) [ 3.437648] [] (__of_reset_control_get) from [] (tegra_ehci_probe+0x394/0x518) [ 3.446600] [] (tegra_ehci_probe) from [] (platform_drv_probe+0x4c/0xb0) [ 3.455029] [] (platform_drv_probe) from [] (driver_probe_device+0x1ec/0x330) [ 3.463892] [] (driver_probe_device) from [] (__driver_attach+0xb8/0xbc) [ 3.472320] [] (__driver_attach) from [] (bus_for_each_dev+0x68/0x9c) [ 3.480489] [] (bus_for_each_dev) from [] (bus_add_driver+0x1a0/0x218) [ 3.488743] [] (bus_add_driver) from [] (driver_register+0x78/0xf8) [ 3.496738] [] (driver_register) from [] (do_one_initcall+0x40/0x170) [ 3.504909] [] (do_one_initcall) from [] (kernel_init_freeable+0x158/0x1f8) [ 3.513600] [] (kernel_init_freeable) from [] (kernel_init+0x8/0x114) [ 3.521770] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 3.529361] ---[ end trace 4bda87dbe4ecef8a ]--- The reason is that Tegra SoCs have three EHCI controllers, each with a separate reset line. However the first controller contains UTMI pads configuration registers that are shared with its siblings and that are reset as part of the first controller's reset. There is special code in the driver to assert and deassert this shared reset at probe time, and it does so irrespective of which controller is probed first to ensure that these shared registers are reset before any of the controllers are initialized. Unfortunately this means that if the first controller gets probed first, it will request its own reset line and will subsequently request the same reset line again (temporarily) to perform the reset. This used to work fine before the above-mentioned commit, but now triggers the new WARN. Work around this by making sure we reuse the controller's reset if the controller happens to be the first controller. Cc: Philipp Zabel Cc: Hans de Goede Reviewed-by: Philipp Zabel Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index c1c1024a054c..9a3d7db5be57 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -81,15 +81,23 @@ static int tegra_reset_usb_controller(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct tegra_ehci_hcd *tegra = (struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv; + bool has_utmi_pad_registers = false; phy_np = of_parse_phandle(pdev->dev.of_node, "nvidia,phy", 0); if (!phy_np) return -ENOENT; + if (of_property_read_bool(phy_np, "nvidia,has-utmi-pad-registers")) + has_utmi_pad_registers = true; + if (!usb1_reset_attempted) { struct reset_control *usb1_reset; - usb1_reset = of_reset_control_get(phy_np, "utmi-pads"); + if (!has_utmi_pad_registers) + usb1_reset = of_reset_control_get(phy_np, "utmi-pads"); + else + usb1_reset = tegra->rst; + if (IS_ERR(usb1_reset)) { dev_warn(&pdev->dev, "can't get utmi-pads reset from the PHY\n"); @@ -99,13 +107,15 @@ static int tegra_reset_usb_controller(struct platform_device *pdev) reset_control_assert(usb1_reset); udelay(1); reset_control_deassert(usb1_reset); + + if (!has_utmi_pad_registers) + reset_control_put(usb1_reset); } - reset_control_put(usb1_reset); usb1_reset_attempted = true; } - if (!of_property_read_bool(phy_np, "nvidia,has-utmi-pad-registers")) { + if (!has_utmi_pad_registers) { reset_control_assert(tegra->rst); udelay(1); reset_control_deassert(tegra->rst); -- cgit v1.2.3 From 815c9d6a3caeb803ae36d09788c8969b85ce7e4c Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Fri, 20 May 2016 16:35:07 -0500 Subject: usb: host: ehci-msm: Conditionally call ehci suspend/resume This patch fixes a suspend/resume issue where the driver is blindly calling ehci_suspend/resume functions when the ehci hasn't been setup. This results in a crash during suspend/resume operations. Signed-off-by: Andy Gross Tested-by: Pramod Gurav Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-msm.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index d3afc89d00f5..2f8d3af811ce 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -179,22 +179,32 @@ static int ehci_msm_remove(struct platform_device *pdev) static int ehci_msm_pm_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); bool do_wakeup = device_may_wakeup(dev); dev_dbg(dev, "ehci-msm PM suspend\n"); - return ehci_suspend(hcd, do_wakeup); + /* Only call ehci_suspend if ehci_setup has been done */ + if (ehci->sbrn) + return ehci_suspend(hcd, do_wakeup); + + return 0; } static int ehci_msm_pm_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); dev_dbg(dev, "ehci-msm PM resume\n"); - ehci_resume(hcd, false); + + /* Only call ehci_resume if ehci_setup has been done */ + if (ehci->sbrn) + ehci_resume(hcd, false); return 0; } + #else #define ehci_msm_pm_suspend NULL #define ehci_msm_pm_resume NULL -- cgit v1.2.3 From 11c011a5e777c83819078a18672543f04482b3ec Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 19 May 2016 11:12:56 +0100 Subject: usb: echi-hcd: Add ehci_setup check before echi_shutdown This patch protects system from crashing at shutdown in cases where usb host is not added yet from OTG controller driver. As ehci_setup() not done yet, so stop accessing registers or variables initialized as part of ehci_setup(). The use case is simple, for boards like DB410c where the usb host or device functionality is decided based on the micro-usb cable presence. If the board boots up with micro-usb connected, the OTG driver like echi-msm would not add the usb host by default. However a system shutdown would go and access registers and uninitialized variables, resulting in below crash. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = ffffffc034581000 [00000008] *pgd=0000000000000000, *pud=0000000000000000 CPU: 2 PID: 1957 Comm: reboot Not tainted 4.6.0+ #99 task: ffffffc034bc0000 ti: ffffffc0345cc000 task.ti: ffffffc0345cc000 PC is at ehci_halt+0x54/0x108 LR is at ehci_halt+0x38/0x108 pc : [] lr : [] pstate: a00001c5 sp : ffffffc0345cfc60 x29: ffffffc0345cfc60 x28: ffffffc0345cc000 x27: ffffff8008a4d000 x26: 000000000000008e x25: ffffff8008d86cb0 x24: ffffff800908b040 x23: ffffffc036068870 x22: ffffff8009d0a000 x21: ffffffc03512a410 x20: ffffffc03512a410 x19: ffffffc03512a338 x18: 00000000000065ba x17: ffffff8009b16b80 x16: 0000000000000003 x15: 00000000000065b9 x14: 00000000000065b6 x13: 0000000000000000 x12: 0000000000000000 x11: 000000000000003d x10: ffffffc0345cf9e0 x9 : 0000000000000001 x8 : ffffffc0345cc000 x7 : ffffff8008698360 x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000008 x0 : ffffffc034bc0000 Process reboot (pid: 1957, stack limit = 0xffffffc0345cc020) Stack: (0xffffffc0345cfc60 to 0xffffffc0345d0000) fc60: ffffffc0345cfc90 ffffff8008698448 ffffffc03512a338 ffffffc03512a338 fc80: ffffffc03512a410 ffffff8008a3bbfc ffffffc0345cfcc0 ffffff8008698548 fca0: ffffffc03512a338 ffffffc03512a000 ffffffc03512a410 ffffff8009d0a000 fcc0: ffffffc0345cfcf0 ffffff800865d2bc ffffffc036068828 ffffffc036068810 fce0: ffffffc036003810 ffffff800853f43c ffffffc0345cfd00 ffffff800854338c fd00: ffffffc0345cfd10 ffffff800853f45c ffffffc0345cfd60 ffffff80080e0f48 fd20: 0000000000000000 0000000001234567 ffffff8008f8c000 ffffff8008f8c060 fd40: 0000000000000000 0000000000000015 0000000000000120 ffffff80080e0f30 fd60: ffffffc0345cfd70 ffffff80080e1020 ffffffc0345cfd90 ffffff80080e12fc fd80: 0000000000000000 0000000001234567 0000000000000000 ffffff8008085e70 fda0: 0000000000000000 0000005592905000 ffffffffffffffff 0000007f79daf1cc fdc0: 0000000000000000 0000000000000000 0000007ffcbb1198 000000000000000a fde0: 00000055928d3f58 0000000000000001 ffffffc034900000 00000000fffffffe fe00: ffffffc034900000 0000007f79da902c ffffffc0345cfe40 ffffff800820af38 fe20: 0000000000000000 0000007ffcbb1078 ffffffffffffffff ffffff80081e9b38 fe40: ffffffc0345cfe60 ffffff80081eb410 ffffffc0345cfe60 ffffff80081eb444 fe60: ffffffc0345cfec0 ffffff80081ec4f4 0000000000000000 0000007ffcbb1078 fe80: ffffffffffffffff 0000000000000015 ffffffc0345cfec0 0000007ffcbb1078 fea0: 0000000000000002 000000000000000a ffffffffffffffff 0000000000000000 fec0: 0000000000000000 ffffff8008085e70 fffffffffee1dead 0000000028121969 fee0: 0000000001234567 0000000000000000 ffffffffffffffff 8080800000800000 ff00: 0000800000808080 0000007ffcbb10f0 000000000000008e fefeff54918cb8c7 ff20: 7f7f7f7fffffffff 0101010101010101 0000000000000010 0000000000000000 ff40: 0000000000000000 0000007f79e33588 0000005592905eb8 0000007f79daf1b0 ff60: 0000007ffcbb1340 0000005592906000 0000005592905000 0000005592906000 ff80: 0000005592907000 0000000000000002 0000007ffcbb1d98 0000005592906000 ffa0: 00000055928d2000 0000000000000000 0000000000000000 0000007ffcbb1aa0 ffc0: 00000055928b819c 0000007ffcbb1aa0 0000007f79daf1cc 0000000000000000 ffe0: fffffffffee1dead 000000000000008e 05ef555057155555 d555544d55d775d3 Call trace: Exception stack(0xffffffc0345cfaa0 to 0xffffffc0345cfbc0) Set corner to 6 faa0: ffffffc03512a338 ffffffc03512a410 ffffffc0345cfc60 ffffff800869837c fac0: ffffff8008114210 0000000100000001 ffffff8009ce1b20 ffffff8009ce5f20 fae0: ffffffc0345cfb80 ffffff80081145a8 ffffffc0345cfc10 ffffff800810b924 fb00: ffffffc0345cc000 00000000000001c0 ffffffc03512a410 ffffff8009d0a000 fb20: ffffffc036068870 ffffff800908b040 ffffff8008d86cb0 000000000000008e fb40: ffffffc034bc0000 0000000000000008 0000000000000000 0000000000000000 fb60: 0000000000000001 0000000000000080 0000000000000000 ffffff8008698360 fb80: ffffffc0345cc000 0000000000000001 ffffffc0345cf9e0 000000000000003d fba0: 0000000000000000 0000000000000000 00000000000065b6 00000000000065b9 [] ehci_halt+0x54/0x108 [] ehci_silence_controller+0x18/0xcc [] ehci_shutdown+0x4c/0x64 [] usb_hcd_platform_shutdown+0x1c/0x24 [] platform_drv_shutdown+0x20/0x28 [] device_shutdown+0xf4/0x1b0 [] kernel_restart_prepare+0x34/0x3c [] kernel_restart+0x14/0x74 [] SyS_reboot+0x110/0x21c [] el0_svc_naked+0x24/0x28 Code: 53001c42 350000a2 d5033e9f 91002021 (b9000022) Fixes 4bb3cad7125b ("usb: host: ehci-msm: Register usb shutdown function") Signed-off-by: Srinivas Kandagatla Tested-by: Pramod Gurav Tested-by: Andy Gross Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index ae1b6e69eb96..a962b89b65a6 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -368,6 +368,15 @@ static void ehci_shutdown(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); + /** + * Protect the system from crashing at system shutdown in cases where + * usb host is not added yet from OTG controller driver. + * As ehci_setup() not done yet, so stop accessing registers or + * variables initialized in ehci_setup() + */ + if (!ehci->sbrn) + return; + spin_lock_irq(&ehci->lock); ehci->shutdown = true; ehci->rh_state = EHCI_RH_STOPPING; -- cgit v1.2.3 From d15d6cf91695674fbabac3b1d2c8a269d9bab5c6 Mon Sep 17 00:00:00 2001 From: William Breathitt Gray Date: Thu, 2 Jun 2016 16:00:09 -0400 Subject: gpio: 104-dio-48e: Fix control port offset computation off-by-one error There are only two control ports, each controlling three distinct I/O ports. To compute the control port address offset for a respective I/O port, the I/O port address offset should be divided by 3; dividing by 2 may result in not only the wrong address offset but possibly also an out-of-bounds array memory access for a non-existent third control port. Fixes: 1b06d64f7374 ("gpio: Add GPIO support for the ACCES 104-DIO-48E") Signed-off-by: William Breathitt Gray Signed-off-by: Linus Walleij --- drivers/gpio/gpio-104-dio-48e.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c index 1a647c07be67..fcf776971ca9 100644 --- a/drivers/gpio/gpio-104-dio-48e.c +++ b/drivers/gpio/gpio-104-dio-48e.c @@ -75,7 +75,7 @@ static int dio48e_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip); const unsigned io_port = offset / 8; - const unsigned control_port = io_port / 2; + const unsigned int control_port = io_port / 3; const unsigned control_addr = dio48egpio->base + 3 + control_port*4; unsigned long flags; unsigned control; @@ -115,7 +115,7 @@ static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned offset, { struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip); const unsigned io_port = offset / 8; - const unsigned control_port = io_port / 2; + const unsigned int control_port = io_port / 3; const unsigned mask = BIT(offset % 8); const unsigned control_addr = dio48egpio->base + 3 + control_port*4; const unsigned out_port = (io_port > 2) ? io_port + 1 : io_port; -- cgit v1.2.3 From 0f84f29ff30bdb1bca23017b118b4ea3999cac32 Mon Sep 17 00:00:00 2001 From: Helmut Grohne Date: Fri, 3 Jun 2016 14:15:32 +0200 Subject: gpio: zynq: initialize clock even without CONFIG_PM When the PM initialization was moved in the commit referenced below, the code enabling the clock was removed from the probe function. On CONFIG_PM=y kernels, this is not a problem as the pm resume hook enables the clock, but when power management is disabled, all those pm_* functions are noops and the clock is never enabled resulting in a dysfunctional gpio controller. Put the clock initialization back to support CONFIG_PM=n. Cc: stable@vger.kernel.org Signed-off-by: Helmut Grohne Fixes: 3773c195d387 ("gpio: zynq: Do PM initialization earlier to support gpio hogs") Signed-off-by: Linus Walleij --- drivers/gpio/gpio-zynq.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c index 75c6355b018d..e72794e463aa 100644 --- a/drivers/gpio/gpio-zynq.c +++ b/drivers/gpio/gpio-zynq.c @@ -709,7 +709,13 @@ static int zynq_gpio_probe(struct platform_device *pdev) dev_err(&pdev->dev, "input clock not found.\n"); return PTR_ERR(gpio->clk); } + ret = clk_prepare_enable(gpio->clk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable clock.\n"); + return ret; + } + pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) @@ -747,6 +753,7 @@ err_pm_put: pm_runtime_put(&pdev->dev); err_pm_dis: pm_runtime_disable(&pdev->dev); + clk_disable_unprepare(gpio->clk); return ret; } -- cgit v1.2.3 From 11f33a6d15bfa397867ac0d7f3481b6dd683286f Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Fri, 3 Jun 2016 19:10:01 +0200 Subject: gpiolib: Fix NULL pointer deference Under some circumstances, a gpiochip might be half cleaned from the gpio_device list. This patch makes sure that the chip pointer is still valid, before calling the match function. [ 104.088296] BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 [ 104.089772] IP: [] of_gpiochip_find_and_xlate+0x15/0x80 [ 104.128273] Call Trace: [ 104.129802] [] ? of_parse_own_gpio+0x1f0/0x1f0 [ 104.131353] [] gpiochip_find+0x60/0x90 [ 104.132868] [] of_get_named_gpiod_flags+0x9a/0x120 ... [ 104.141586] [] gpio_led_probe+0x11b/0x360 Cc: stable@vger.kernel.org Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 24f60d28f0c0..a2c31a5a677f 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -869,7 +869,7 @@ struct gpio_chip *gpiochip_find(void *data, spin_lock_irqsave(&gpio_lock, flags); list_for_each_entry(gdev, &gpio_devices, list) - if (match(gdev->chip, data)) + if (gdev->chip && match(gdev->chip, data)) break; /* No match? */ -- cgit v1.2.3 From f4833b8cc7edab57d3f3033e549111a546c2e02b Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Fri, 3 Jun 2016 19:10:02 +0200 Subject: gpiolib: Fix unaligned used of reference counters gpiolib relies on the reference counters to clean up the gpio_device structure. Although the number of get/put is properly aligned on gpiolib.c itself, it does not take into consideration how the referece counters are affected by other external functions such as cdev_add and device_add. Because of this, after the last call to put_device, the reference counter has a value of +3, therefore never calling gpiodevice_release. Due to the fact that some of the device has already been cleaned on gpiochip_remove, the library will end up OOPsing the kernel (e.g. a call to of_gpiochip_find_and_xlate). Cc: stable@vger.kernel.org Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index a2c31a5a677f..58d822d7e8da 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -449,7 +449,6 @@ static void gpiodevice_release(struct device *dev) { struct gpio_device *gdev = dev_get_drvdata(dev); - cdev_del(&gdev->chrdev); list_del(&gdev->list); ida_simple_remove(&gpio_ida, gdev->id); kfree(gdev->label); @@ -482,7 +481,6 @@ static int gpiochip_setup_dev(struct gpio_device *gdev) /* From this point, the .release() function cleans up gpio_device */ gdev->dev.release = gpiodevice_release; - get_device(&gdev->dev); pr_debug("%s: registered GPIOs %d to %d on device: %s (%s)\n", __func__, gdev->base, gdev->base + gdev->ngpio - 1, dev_name(&gdev->dev), gdev->chip->label ? : "generic"); @@ -770,6 +768,8 @@ void gpiochip_remove(struct gpio_chip *chip) * be removed, else it will be dangling until the last user is * gone. */ + cdev_del(&gdev->chrdev); + device_del(&gdev->dev); put_device(&gdev->dev); } EXPORT_SYMBOL_GPL(gpiochip_remove); -- cgit v1.2.3 From 7d4defe21c682c934a19fce1ba8b54b7bde61b08 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 8 Jun 2016 10:58:20 +0200 Subject: gpio: include in gpiolib-of When enabling the gpiolib for all archs a build robot came up with this: All errors (new ones prefixed by >>): drivers/gpio/gpiolib-of.c: In function 'of_mm_gpiochip_add_data': >> drivers/gpio/gpiolib-of.c:317:2: error: implicit declaration of function 'iounmap' [-Werror=implicit-function-declaration] iounmap(mm_gc->regs); ^~~~~~~ cc1: some warnings being treated as errors Fix this by including explicitly. Fixes: 296ad4acb8ef ("gpio: remove deps on ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB") Reported-by: kbuild test robot Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib-of.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index d22dcc38179d..4aabddb38b59 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 7cfe749fad5158247282f2fee30773fd454029ab Mon Sep 17 00:00:00 2001 From: Tony Makkiel Date: Wed, 18 May 2016 17:22:45 +0100 Subject: leds: core: Fix brightness setting upon hardware blinking enabled Commit 76931edd54f8 ("leds: fix brightness changing when software blinking is active") changed the semantics of led_set_brightness() which according to the documentation should disable blinking upon any brightness setting. Moreover it made it different for soft blink case, where it was possible to change blink brightness, and for hardware blink case, where setting any brightness greater than 0 was ignored. While the change itself is against the documentation claims, it was driven also by the fact that timer trigger remained active after turning blinking off. Fixing that would have required major refactoring in the led-core, led-class, and led-triggers because of cyclic dependencies. Finally, it has been decided that allowing for brightness change during blinking is beneficial as it can be accomplished without disturbing blink rhythm. The change in brightness setting semantics will not affect existing LED class drivers that implement blink_set op thanks to the LED_BLINK_SW flag introduced by this patch. The flag state will be from now on checked in led_set_brightness() which will allow to distinguish between software and hardware blink mode. In the latter case the control will be passed directly to the drivers which apply their semantics on brightness set, which is disable the blinking in case of most such drivers. New drivers will apply new semantics and just change the brightness while hardware blinking is on, if possible. The issue was smuggled by subsequent LED core improvements, which modified the code that originally introduced the problem. Fixes: f1e80c07416a ("leds: core: Add two new LED_BLINK_ flags") Signed-off-by: Tony Makkiel Signed-off-by: Jacek Anaszewski --- Documentation/leds/leds-class.txt | 4 ++-- drivers/leds/led-core.c | 9 ++++++--- include/linux/leds.h | 23 ++++++++++++----------- 3 files changed, 20 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt index d406d98339b2..44f5e6bccd97 100644 --- a/Documentation/leds/leds-class.txt +++ b/Documentation/leds/leds-class.txt @@ -74,8 +74,8 @@ blink_set() function (see ). To set an LED to blinking, however, it is better to use the API function led_blink_set(), as it will check and implement software fallback if necessary. -To turn off blinking again, use the API function led_brightness_set() -as that will not just set the LED brightness but also stop any software +To turn off blinking, use the API function led_brightness_set() +with brightness value LED_OFF, which should stop any software timers that may have been required for blinking. The blink_set() function should choose a user friendly blinking value diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c index 3495d5d6547f..3bce44893021 100644 --- a/drivers/leds/led-core.c +++ b/drivers/leds/led-core.c @@ -53,11 +53,12 @@ static void led_timer_function(unsigned long data) if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) { led_set_brightness_nosleep(led_cdev, LED_OFF); + led_cdev->flags &= ~LED_BLINK_SW; return; } if (led_cdev->flags & LED_BLINK_ONESHOT_STOP) { - led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP; + led_cdev->flags &= ~(LED_BLINK_ONESHOT_STOP | LED_BLINK_SW); return; } @@ -151,6 +152,7 @@ static void led_set_software_blink(struct led_classdev *led_cdev, return; } + led_cdev->flags |= LED_BLINK_SW; mod_timer(&led_cdev->blink_timer, jiffies + 1); } @@ -219,6 +221,7 @@ void led_stop_software_blink(struct led_classdev *led_cdev) del_timer_sync(&led_cdev->blink_timer); led_cdev->blink_delay_on = 0; led_cdev->blink_delay_off = 0; + led_cdev->flags &= ~LED_BLINK_SW; } EXPORT_SYMBOL_GPL(led_stop_software_blink); @@ -226,10 +229,10 @@ void led_set_brightness(struct led_classdev *led_cdev, enum led_brightness brightness) { /* - * In case blinking is on delay brightness setting + * If software blink is active, delay brightness setting * until the next timer tick. */ - if (led_cdev->blink_delay_on || led_cdev->blink_delay_off) { + if (led_cdev->flags & LED_BLINK_SW) { /* * If we need to disable soft blinking delegate this to the * work queue task to avoid problems in case we are called diff --git a/include/linux/leds.h b/include/linux/leds.h index d2b13066e781..e5e7f2e80a54 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -42,15 +42,16 @@ struct led_classdev { #define LED_UNREGISTERING (1 << 1) /* Upper 16 bits reflect control information */ #define LED_CORE_SUSPENDRESUME (1 << 16) -#define LED_BLINK_ONESHOT (1 << 17) -#define LED_BLINK_ONESHOT_STOP (1 << 18) -#define LED_BLINK_INVERT (1 << 19) -#define LED_BLINK_BRIGHTNESS_CHANGE (1 << 20) -#define LED_BLINK_DISABLE (1 << 21) -#define LED_SYSFS_DISABLE (1 << 22) -#define LED_DEV_CAP_FLASH (1 << 23) -#define LED_HW_PLUGGABLE (1 << 24) -#define LED_PANIC_INDICATOR (1 << 25) +#define LED_BLINK_SW (1 << 17) +#define LED_BLINK_ONESHOT (1 << 18) +#define LED_BLINK_ONESHOT_STOP (1 << 19) +#define LED_BLINK_INVERT (1 << 20) +#define LED_BLINK_BRIGHTNESS_CHANGE (1 << 21) +#define LED_BLINK_DISABLE (1 << 22) +#define LED_SYSFS_DISABLE (1 << 23) +#define LED_DEV_CAP_FLASH (1 << 24) +#define LED_HW_PLUGGABLE (1 << 25) +#define LED_PANIC_INDICATOR (1 << 26) /* Set LED brightness level * Must not sleep. Use brightness_set_blocking for drivers @@ -72,8 +73,8 @@ struct led_classdev { * and if both are zero then a sensible default should be chosen. * The call should adjust the timings in that case and if it can't * match the values specified exactly. - * Deactivate blinking again when the brightness is set to a fixed - * value via the brightness_set() callback. + * Deactivate blinking again when the brightness is set to LED_OFF + * via the brightness_set() callback. */ int (*blink_set)(struct led_classdev *led_cdev, unsigned long *delay_on, -- cgit v1.2.3 From 5ab92a7cb82c66bf30685583a38a18538e3807db Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 8 Jun 2016 10:29:48 +0200 Subject: leds: handle suspend/resume in heartbeat trigger The following phenomena was observed: when suspending the system, sometimes the heartbeat LED was left on, glowing and wasting power while the rest of the system is asleep, also disturbing power dissapation measures on the odd suspend cycle when it's left on. Clearly this is not how we want the heartbeat trigger to work: it should turn off and leave the LED off during system suspend. This removes the heartbeat trigger when preparing suspend and restores it during resume. The trigger code will make sure all LEDs are left in OFF state after removing the trigger, and will re-enable the trigger on all LEDs after resuming. Cc: linux-pm@vger.kernel.org Signed-off-by: Linus Walleij Reviewed-by: Ulf Hansson Signed-off-by: Jacek Anaszewski --- drivers/leds/trigger/ledtrig-heartbeat.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'drivers') diff --git a/drivers/leds/trigger/ledtrig-heartbeat.c b/drivers/leds/trigger/ledtrig-heartbeat.c index 410c39c62dc7..c9f386213e9e 100644 --- a/drivers/leds/trigger/ledtrig-heartbeat.c +++ b/drivers/leds/trigger/ledtrig-heartbeat.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "../leds.h" static int panic_heartbeats; @@ -154,6 +155,30 @@ static struct led_trigger heartbeat_led_trigger = { .deactivate = heartbeat_trig_deactivate, }; +static int heartbeat_pm_notifier(struct notifier_block *nb, + unsigned long pm_event, void *unused) +{ + int rc; + + switch (pm_event) { + case PM_SUSPEND_PREPARE: + case PM_HIBERNATION_PREPARE: + case PM_RESTORE_PREPARE: + led_trigger_unregister(&heartbeat_led_trigger); + break; + case PM_POST_SUSPEND: + case PM_POST_HIBERNATION: + case PM_POST_RESTORE: + rc = led_trigger_register(&heartbeat_led_trigger); + if (rc) + pr_err("could not re-register heartbeat trigger\n"); + break; + default: + break; + } + return NOTIFY_DONE; +} + static int heartbeat_reboot_notifier(struct notifier_block *nb, unsigned long code, void *unused) { @@ -168,6 +193,10 @@ static int heartbeat_panic_notifier(struct notifier_block *nb, return NOTIFY_DONE; } +static struct notifier_block heartbeat_pm_nb = { + .notifier_call = heartbeat_pm_notifier, +}; + static struct notifier_block heartbeat_reboot_nb = { .notifier_call = heartbeat_reboot_notifier, }; @@ -184,12 +213,14 @@ static int __init heartbeat_trig_init(void) atomic_notifier_chain_register(&panic_notifier_list, &heartbeat_panic_nb); register_reboot_notifier(&heartbeat_reboot_nb); + register_pm_notifier(&heartbeat_pm_nb); } return rc; } static void __exit heartbeat_trig_exit(void) { + unregister_pm_notifier(&heartbeat_pm_nb); unregister_reboot_notifier(&heartbeat_reboot_nb); atomic_notifier_chain_unregister(&panic_notifier_list, &heartbeat_panic_nb); -- cgit v1.2.3 From 4dc0dd83603f05dc3ae152af33ecb15104c313f3 Mon Sep 17 00:00:00 2001 From: Tomeu Vizoso Date: Wed, 8 Jun 2016 09:32:51 +0200 Subject: spi: rockchip: Signal unfinished DMA transfers When using DMA, the transfer_one callback should return 1 because the transfer hasn't finished yet. A previous commit changed the function to return 0 when the DMA channels were correctly prepared. This manifested in Veyron boards with this message: [ 1.983605] cros-ec-spi spi0.0: EC failed to respond in time Fixes: ea9849113343 ("spi: rockchip: check return value of dmaengine_prep_slave_sg") Signed-off-by: Tomeu Vizoso Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-rockchip.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index cd89682065b9..1026e180eed7 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -578,7 +578,7 @@ static int rockchip_spi_transfer_one( struct spi_device *spi, struct spi_transfer *xfer) { - int ret = 1; + int ret = 0; struct rockchip_spi *rs = spi_master_get_devdata(master); WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) && @@ -627,6 +627,8 @@ static int rockchip_spi_transfer_one( spi_enable_chip(rs, 1); ret = rockchip_spi_prepare_dma(rs); } + /* successful DMA prepare means the transfer is in progress */ + ret = ret ? ret : 1; } else { spi_enable_chip(rs, 1); ret = rockchip_spi_pio_transfer(rs); -- cgit v1.2.3 From a8a47540ebe32f1733eebc3e5699af580ceaa3f5 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 2 Jun 2016 11:23:15 +0100 Subject: regulator: qcom_smd: add list_voltage callback This patch adds support to list_voltage callback, so that consumers like mmc core, can get information of supported voltage range. Without this patch there is no way for mmc core to know this voltage range. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown Cc: stable@vger.kernel.org # v4.6 --- drivers/regulator/qcom_smd-regulator.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 56a17ec5b5ef..b11b627a50db 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -140,6 +140,7 @@ static const struct regulator_ops rpm_smps_ldo_ops = { .enable = rpm_reg_enable, .disable = rpm_reg_disable, .is_enabled = rpm_reg_is_enabled, + .list_voltage = regulator_list_voltage_linear_range, .get_voltage = rpm_reg_get_voltage, .set_voltage = rpm_reg_set_voltage, -- cgit v1.2.3 From d1e44b6b2823f1751ffe7e7589f545f05cfe2095 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 3 Jun 2016 12:23:09 +0100 Subject: regulator: qcom_smd: add regulator ops for pm8941 lnldo After "regulator: qcom_smd: add list_voltage callback" patch adding pm8941 lnldo regulators would bug on list_voltages as it is a fixed regulator without any linear range. This patch fixes that issue by adding dedicated ops for pm8941 lnldo without list_voltages callback. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown Cc: stable@vger.kernel.org # v4.6 --- drivers/regulator/qcom_smd-regulator.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index b11b627a50db..6c7fe4778793 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -148,6 +148,17 @@ static const struct regulator_ops rpm_smps_ldo_ops = { .set_load = rpm_reg_set_load, }; +static const struct regulator_ops rpm_smps_ldo_ops_fixed = { + .enable = rpm_reg_enable, + .disable = rpm_reg_disable, + .is_enabled = rpm_reg_is_enabled, + + .get_voltage = rpm_reg_get_voltage, + .set_voltage = rpm_reg_set_voltage, + + .set_load = rpm_reg_set_load, +}; + static const struct regulator_ops rpm_switch_ops = { .enable = rpm_reg_enable, .disable = rpm_reg_disable, @@ -248,7 +259,7 @@ static const struct regulator_desc pm8941_nldo = { static const struct regulator_desc pm8941_lnldo = { .fixed_uV = 1740000, .n_voltages = 1, - .ops = &rpm_smps_ldo_ops, + .ops = &rpm_smps_ldo_ops_fixed, }; static const struct regulator_desc pm8941_switch = { -- cgit v1.2.3 From 60a5eaba46919f3a4c63a0c93bb7015ad5e56a82 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 8 Jun 2016 13:45:08 +0200 Subject: gpio: select ANON_INODES The build servers found that gpiolib is using ANON_INODES but has forgotten to select it. Fix this. Reported-by: kbuild test robot Fixes: 521a2ad6f862 ("gpio: add userspace ABI for GPIO line information") Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 48da857f4774..a116609b1914 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -33,6 +33,7 @@ config ARCH_REQUIRE_GPIOLIB menuconfig GPIOLIB bool "GPIO Support" + select ANON_INODES help This enables GPIO support through the generic GPIO library. You only need to enable this, if you also want to enable -- cgit v1.2.3 From b66b2a0adf0e48973b582e055758b9907a7eee7c Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 7 Jun 2016 17:22:17 +0100 Subject: gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings The bcm_kona_gpio_reset() calls bcm_kona_gpio_write_lock_regs() with what looks like the wrong parameter. The write_lock_regs function takes a pointer to the registers, not the bcm_kona_gpio structure. Fix the warning, and probably bug by changing the function to pass reg_base instead of kona_gpio, fixing the following warning: drivers/gpio/gpio-bcm-kona.c:550:47: warning: incorrect type in argument 1 (different address spaces) expected void [noderef] *reg_base got struct bcm_kona_gpio *kona_gpio warning: incorrect type in argument 1 (different address spaces) expected void [noderef] *reg_base got struct bcm_kona_gpio *kona_gpio Cc: stable@vger.kernel.org Signed-off-by: Ben Dooks Acked-by: Ray Jui Reviewed-by: Markus Mayer Signed-off-by: Linus Walleij --- drivers/gpio/gpio-bcm-kona.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c index 9aabc48ff5de..953e4b829e32 100644 --- a/drivers/gpio/gpio-bcm-kona.c +++ b/drivers/gpio/gpio-bcm-kona.c @@ -547,11 +547,11 @@ static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio) /* disable interrupts and clear status */ for (i = 0; i < kona_gpio->num_bank; i++) { /* Unlock the entire bank first */ - bcm_kona_gpio_write_lock_regs(kona_gpio, i, UNLOCK_CODE); + bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE); writel(0xffffffff, reg_base + GPIO_INT_MASK(i)); writel(0xffffffff, reg_base + GPIO_INT_STATUS(i)); /* Now re-lock the bank */ - bcm_kona_gpio_write_lock_regs(kona_gpio, i, LOCK_CODE); + bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE); } } -- cgit v1.2.3 From 0b0d81e3b7334897da9b2e3ffee860c2046f7bc0 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Thu, 26 May 2016 13:43:43 -0500 Subject: objtool, drm/vmwgfx: Fix "duplicate frame pointer save" warning objtool reports the following warnings: drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: warning: objtool: vmw_send_msg()+0x107: duplicate frame pointer save drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: warning: objtool: vmw_host_get_guestinfo()+0x252: duplicate frame pointer save To quote Linus: "The reason is that VMW_PORT_HB_OUT() uses a magic instruction sequence (a "rep outsb") to communicate with the hypervisor (it's a virtual GPU driver for vmware), and %rbp is part of the communication. So the inline asm does a save-and-restore of the frame pointer around the instruction sequence. I actually find the objtool warning to be quite reasonable, so it's not exactly a false positive, since in this case it actually does point out that the frame pointer won't be reliable over that instruction sequence. But in this particular case it just ends up being the wrong thing - the code is what it is, and %rbp just can't have the frame information due to annoying magic calling conventions." Silence the warnings by telling objtool to ignore the two functions which use the VMW_PORT_HB_{IN,OUT} macros. Reported-by: Linus Torvalds Signed-off-by: Josh Poimboeuf Acked-by: Linus Torvalds Cc: DRI Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20160526184343.fdtjjjg67smmeekt@treble Signed-off-by: Ingo Molnar --- drivers/gpu/drm/vmwgfx/vmwgfx_msg.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c index 6de283c8fa3e..f0374f9b56ca 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include "drmP.h" #include "vmwgfx_msg.h" @@ -194,7 +195,7 @@ static int vmw_send_msg(struct rpc_channel *channel, const char *msg) return -EINVAL; } - +STACK_FRAME_NON_STANDARD(vmw_send_msg); /** @@ -304,6 +305,7 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg, return 0; } +STACK_FRAME_NON_STANDARD(vmw_recv_msg); /** -- cgit v1.2.3 From d366a0ff1cf73f93796f2377e7b0361a94c41c35 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 8 Jun 2016 10:32:10 -0400 Subject: nbd: pass the nbd pointer for flags debugfs We were passing in &nbd for the private data in debugfs_create_file() for the flags entry. We expect it to just be nbd, fix this so we get proper output from this debugfs entry. Signed-off-by: Josef Bacik Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 31e73a7a40f2..6a48ed41963f 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -941,7 +941,7 @@ static int nbd_dev_dbg_init(struct nbd_device *nbd) debugfs_create_u64("size_bytes", 0444, dir, &nbd->bytesize); debugfs_create_u32("timeout", 0444, dir, &nbd->xmit_timeout); debugfs_create_u32("blocksize", 0444, dir, &nbd->blksize); - debugfs_create_file("flags", 0444, dir, &nbd, &nbd_dbg_flags_ops); + debugfs_create_file("flags", 0444, dir, nbd, &nbd_dbg_flags_ops); return 0; } -- cgit v1.2.3 From c0530dd3ef1d3997d885e1345e34a284db2b9cfa Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Wed, 8 Jun 2016 14:57:28 +0530 Subject: cxgb4: Add device id of T540-BT adapter Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h index a2cdfc1261dc..50812a1d67bd 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h @@ -144,6 +144,7 @@ CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN CH_PCI_ID_TABLE_FENTRY(0x5015), /* T502-bt */ CH_PCI_ID_TABLE_FENTRY(0x5016), /* T580-OCP-SO */ CH_PCI_ID_TABLE_FENTRY(0x5017), /* T520-OCP-SO */ + CH_PCI_ID_TABLE_FENTRY(0x5018), /* T540-BT */ CH_PCI_ID_TABLE_FENTRY(0x5080), /* Custom T540-cr */ CH_PCI_ID_TABLE_FENTRY(0x5081), /* Custom T540-LL-cr */ CH_PCI_ID_TABLE_FENTRY(0x5082), /* Custom T504-cr */ -- cgit v1.2.3 From efd1535270c1deb0487527bf0c3c827301a69c93 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Tue, 7 Jun 2016 10:43:15 -0400 Subject: xen-blkfront: don't call talk_to_blkback when already connected to blkback Sometimes blkfront may twice receive blkback_changed() notification (XenbusStateConnected) after migration, which will cause talk_to_blkback() to be called twice too and confuse xen-blkback. The flow is as follow: blkfront blkback blkfront_resume() > talk_to_blkback() > Set blkfront to XenbusStateInitialised front changed() > Connect() > Set blkback to XenbusStateConnected blkback_changed() > Skip talk_to_blkback() because frontstate == XenbusStateInitialised > blkfront_connect() > Set blkfront to XenbusStateConnected ----- And here we get another XenbusStateConnected notification leading to: ----- blkback_changed() > because now frontstate != XenbusStateInitialised talk_to_blkback() is also called again > blkfront state changed from XenbusStateConnected to XenbusStateInitialised (Which is not correct!) front_changed(): > Do nothing because blkback already in XenbusStateConnected Now blkback is in XenbusStateConnected but blkfront is still in XenbusStateInitialised - leading to no disks. Poking of the XenbusStateConnected state is allowed (to deal with block disk change) and has to be dealt with. The most likely cause of this bug are custom udev scripts hooking up the disks and then validating the size. Signed-off-by: Bob Liu Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkfront.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index ca13df854639..6ba8891e8efe 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -2485,10 +2485,23 @@ static void blkback_changed(struct xenbus_device *dev, break; case XenbusStateConnected: - if (dev->state != XenbusStateInitialised) { + /* + * talk_to_blkback sets state to XenbusStateInitialised + * and blkfront_connect sets it to XenbusStateConnected + * (if connection went OK). + * + * If the backend (or toolstack) decides to poke at backend + * state (and re-trigger the watch by setting the state repeatedly + * to XenbusStateConnected (4)) we need to deal with this. + * This is allowed as this is used to communicate to the guest + * that the size of disk has changed! + */ + if ((dev->state != XenbusStateInitialised) && + (dev->state != XenbusStateConnected)) { if (talk_to_blkback(dev, info)) break; } + blkfront_connect(info); break; -- cgit v1.2.3 From 2a6f71ad99cabe436e70c3f5fcf58072cb3bc07f Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Tue, 31 May 2016 16:59:17 +0800 Subject: xen-blkfront: fix resume issues after a migration After a migrate to another host (which may not have multiqueue support), the number of rings (block hardware queues) may be changed and the ring info structure will also be reallocated. This patch fixes two related bugs: * call blk_mq_update_nr_hw_queues() to make blk-core know the number of hardware queues have been changed. * Don't store rinfo pointer to hctx->driver_data, because rinfo may be reallocated so use hctx->queue_num to get the rinfo structure instead. Signed-off-by: Bob Liu Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkfront.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 6ba8891e8efe..2e6d1e9c3345 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -874,8 +874,12 @@ static int blkif_queue_rq(struct blk_mq_hw_ctx *hctx, const struct blk_mq_queue_data *qd) { unsigned long flags; - struct blkfront_ring_info *rinfo = (struct blkfront_ring_info *)hctx->driver_data; + int qid = hctx->queue_num; + struct blkfront_info *info = hctx->queue->queuedata; + struct blkfront_ring_info *rinfo = NULL; + BUG_ON(info->nr_rings <= qid); + rinfo = &info->rinfo[qid]; blk_mq_start_request(qd->rq); spin_lock_irqsave(&rinfo->ring_lock, flags); if (RING_FULL(&rinfo->ring)) @@ -901,20 +905,9 @@ out_busy: return BLK_MQ_RQ_QUEUE_BUSY; } -static int blk_mq_init_hctx(struct blk_mq_hw_ctx *hctx, void *data, - unsigned int index) -{ - struct blkfront_info *info = (struct blkfront_info *)data; - - BUG_ON(info->nr_rings <= index); - hctx->driver_data = &info->rinfo[index]; - return 0; -} - static struct blk_mq_ops blkfront_mq_ops = { .queue_rq = blkif_queue_rq, .map_queue = blk_mq_map_queue, - .init_hctx = blk_mq_init_hctx, }; static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size, @@ -950,6 +943,7 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size, return PTR_ERR(rq); } + rq->queuedata = info; queue_flag_set_unlocked(QUEUE_FLAG_VIRT, rq); if (info->feature_discard) { @@ -2149,6 +2143,8 @@ static int blkfront_resume(struct xenbus_device *dev) return err; err = talk_to_blkback(dev, info); + if (!err) + blk_mq_update_nr_hw_queues(&info->tag_set, info->nr_rings); /* * We have to wait for the backend to switch to -- cgit v1.2.3 From 3497ed8c852a5a3d48957ca91baaa443d9bfcd4d Mon Sep 17 00:00:00 2001 From: Bert Kenward Date: Mon, 6 Jun 2016 17:29:30 +0100 Subject: sfc: report supported link speeds on SFP connections 7000-series SFC NICs connected with an SFP+ module currently fail to report any supported link speeds. Reported-by: Jarod Wilson Signed-off-by: Bert Kenward Reviewed-by: Jarod Wilson Tested-by: Jarod Wilson Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/mcdi_port.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/mcdi_port.c b/drivers/net/ethernet/sfc/mcdi_port.c index 7f295c4d7b80..2a9228a6e4a0 100644 --- a/drivers/net/ethernet/sfc/mcdi_port.c +++ b/drivers/net/ethernet/sfc/mcdi_port.c @@ -189,11 +189,12 @@ static u32 mcdi_to_ethtool_cap(u32 media, u32 cap) case MC_CMD_MEDIA_XFP: case MC_CMD_MEDIA_SFP_PLUS: - result |= SUPPORTED_FIBRE; - break; - case MC_CMD_MEDIA_QSFP_PLUS: result |= SUPPORTED_FIBRE; + if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN)) + result |= SUPPORTED_1000baseT_Full; + if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN)) + result |= SUPPORTED_10000baseT_Full; if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) result |= SUPPORTED_40000baseCR4_Full; break; -- cgit v1.2.3 From 48f67d62194952617dcade08194abc7f5cb3f50c Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Mon, 6 Jun 2016 09:46:11 +0800 Subject: ideapad_laptop: Add an event for mic mute hotkey Newer ideapads support a new mic hotkey implemented via an ACPI interface. This patch converts the mic mute event to a keycode KEY_MICMUTE. Signed-off-by: Alex Hung Acked-by: Ike Panhc Signed-off-by: Darren Hart --- drivers/platform/x86/ideapad-laptop.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 4a23fbc66b71..d1a091b93192 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -567,6 +567,7 @@ static void ideapad_sysfs_exit(struct ideapad_private *priv) static const struct key_entry ideapad_keymap[] = { { KE_KEY, 6, { KEY_SWITCHVIDEOMODE } }, { KE_KEY, 7, { KEY_CAMERA } }, + { KE_KEY, 8, { KEY_MICMUTE } }, { KE_KEY, 11, { KEY_F16 } }, { KE_KEY, 13, { KEY_WLAN } }, { KE_KEY, 16, { KEY_PROG1 } }, @@ -809,6 +810,7 @@ static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data) break; case 13: case 11: + case 8: case 7: case 6: ideapad_input_report(priv, vpc_bit); -- cgit v1.2.3 From 0118c2d3eac0545d4095877e5a015b5dc763b3c2 Mon Sep 17 00:00:00 2001 From: Dennis Wassenberg Date: Wed, 8 Jun 2016 10:54:25 -0400 Subject: thinkpad_acpi: Add support for HKEY version 0x200 Lenovo Thinkpad devices T460, T460s, T460p, T560, X260 use HKEY version 0x200 without adaptive keyboard. HKEY version 0x200 has method MHKA with one parameter value. Passing parameter value 1 will get hotkey_all_mask (the same like HKEY version 0x100 without parameter). Passing parameter value 2 to MHKA method will retrieve hotkey_all_adaptive_mask. If 0 is returned in that case there is no adaptive keyboard available. Signed-off-by: Dennis Wassenberg Signed-off-by: Lyude Tested-by: Lyude Tested-by: Marco Trevisan Acked-by: Henrique de Moraes Holschuh [dvhart: Keep MHKA error string on one line in new and existing pr_err calls] Signed-off-by: Darren Hart --- drivers/platform/x86/thinkpad_acpi.c | 87 ++++++++++++++++++++++++++---------- 1 file changed, 63 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index c3bfa1fe95bf..b65ce7519411 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -2043,6 +2043,7 @@ static int hotkey_autosleep_ack; static u32 hotkey_orig_mask; /* events the BIOS had enabled */ static u32 hotkey_all_mask; /* all events supported in fw */ +static u32 hotkey_adaptive_all_mask; /* all adaptive events supported in fw */ static u32 hotkey_reserved_mask; /* events better left disabled */ static u32 hotkey_driver_mask; /* events needed by the driver */ static u32 hotkey_user_mask; /* events visible to userspace */ @@ -2742,6 +2743,17 @@ static ssize_t hotkey_all_mask_show(struct device *dev, static DEVICE_ATTR_RO(hotkey_all_mask); +/* sysfs hotkey all_mask ----------------------------------------------- */ +static ssize_t hotkey_adaptive_all_mask_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "0x%08x\n", + hotkey_adaptive_all_mask | hotkey_source_mask); +} + +static DEVICE_ATTR_RO(hotkey_adaptive_all_mask); + /* sysfs hotkey recommended_mask --------------------------------------- */ static ssize_t hotkey_recommended_mask_show(struct device *dev, struct device_attribute *attr, @@ -2985,6 +2997,7 @@ static struct attribute *hotkey_attributes[] __initdata = { &dev_attr_wakeup_hotunplug_complete.attr, &dev_attr_hotkey_mask.attr, &dev_attr_hotkey_all_mask.attr, + &dev_attr_hotkey_adaptive_all_mask.attr, &dev_attr_hotkey_recommended_mask.attr, #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL &dev_attr_hotkey_source_mask.attr, @@ -3321,20 +3334,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) if (!tp_features.hotkey) return 1; - /* - * Check if we have an adaptive keyboard, like on the - * Lenovo Carbon X1 2014 (2nd Gen). - */ - if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) { - if ((hkeyv >> 8) == 2) { - tp_features.has_adaptive_kbd = true; - res = sysfs_create_group(&tpacpi_pdev->dev.kobj, - &adaptive_kbd_attr_group); - if (res) - goto err_exit; - } - } - quirks = tpacpi_check_quirks(tpacpi_hotkey_qtable, ARRAY_SIZE(tpacpi_hotkey_qtable)); @@ -3357,30 +3356,70 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking for HKEY interface version 0x100 */ if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) { - if ((hkeyv >> 8) != 1) { - pr_err("unknown version of the HKEY interface: 0x%x\n", - hkeyv); - pr_err("please report this to %s\n", TPACPI_MAIL); - } else { + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY, + "firmware HKEY interface version: 0x%x\n", + hkeyv); + + switch (hkeyv >> 8) { + case 1: /* * MHKV 0x100 in A31, R40, R40e, * T4x, X31, and later */ - vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY, - "firmware HKEY interface version: 0x%x\n", - hkeyv); /* Paranoia check AND init hotkey_all_mask */ if (!acpi_evalf(hkey_handle, &hotkey_all_mask, "MHKA", "qd")) { - pr_err("missing MHKA handler, " - "please report this to %s\n", + pr_err("missing MHKA handler, please report this to %s\n", TPACPI_MAIL); /* Fallback: pre-init for FN+F3,F4,F12 */ hotkey_all_mask = 0x080cU; } else { tp_features.hotkey_mask = 1; } + break; + + case 2: + /* + * MHKV 0x200 in X1, T460s, X260, T560, X1 Tablet (2016) + */ + + /* Paranoia check AND init hotkey_all_mask */ + if (!acpi_evalf(hkey_handle, &hotkey_all_mask, + "MHKA", "dd", 1)) { + pr_err("missing MHKA handler, please report this to %s\n", + TPACPI_MAIL); + /* Fallback: pre-init for FN+F3,F4,F12 */ + hotkey_all_mask = 0x080cU; + } else { + tp_features.hotkey_mask = 1; + } + + /* + * Check if we have an adaptive keyboard, like on the + * Lenovo Carbon X1 2014 (2nd Gen). + */ + if (acpi_evalf(hkey_handle, &hotkey_adaptive_all_mask, + "MHKA", "dd", 2)) { + if (hotkey_adaptive_all_mask != 0) { + tp_features.has_adaptive_kbd = true; + res = sysfs_create_group( + &tpacpi_pdev->dev.kobj, + &adaptive_kbd_attr_group); + if (res) + goto err_exit; + } + } else { + tp_features.has_adaptive_kbd = false; + hotkey_adaptive_all_mask = 0x0U; + } + break; + + default: + pr_err("unknown version of the HKEY interface: 0x%x\n", + hkeyv); + pr_err("please report this to %s\n", TPACPI_MAIL); + break; } } -- cgit v1.2.3 From 25789f95a8834d154e5c1f0c9df9a7faedeae98e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 26 May 2016 11:43:23 +0200 Subject: platform/x86: Drop duplicate dependencies on X86 The whole menu depends on X86 so there is no point in repeating this dependency on individual driver entries. Signed-off-by: Jean Delvare Signed-off-by: Darren Hart --- drivers/platform/x86/Kconfig | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index c06bb85c2839..3ec0025d19e7 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -103,7 +103,6 @@ config DELL_SMBIOS config DELL_LAPTOP tristate "Dell Laptop Extras" - depends on X86 depends on DELL_SMBIOS depends on DMI depends on BACKLIGHT_CLASS_DEVICE @@ -505,7 +504,7 @@ config THINKPAD_ACPI_HOTKEY_POLL config SENSORS_HDAPS tristate "Thinkpad Hard Drive Active Protection System (hdaps)" - depends on INPUT && X86 + depends on INPUT select INPUT_POLLDEV default n help @@ -749,7 +748,7 @@ config TOSHIBA_WMI config ACPI_CMPC tristate "CMPC Laptop Extras" - depends on X86 && ACPI + depends on ACPI depends on RFKILL || RFKILL=n select INPUT select BACKLIGHT_CLASS_DEVICE @@ -848,7 +847,7 @@ config INTEL_IMR config INTEL_PMC_CORE bool "Intel PMC Core driver" - depends on X86 && PCI + depends on PCI ---help--- The Intel Platform Controller Hub for Intel Core SoCs provides access to Power Management Controller registers via a PCI interface. This @@ -860,7 +859,7 @@ config INTEL_PMC_CORE config IBM_RTL tristate "Device driver to enable PRTL support" - depends on X86 && PCI + depends on PCI ---help--- Enable support for IBM Premium Real Time Mode (PRTM). This module will allow you the enter and exit PRTM in the BIOS via @@ -894,7 +893,6 @@ config XO15_EBOOK config SAMSUNG_LAPTOP tristate "Samsung Laptop driver" - depends on X86 depends on RFKILL || RFKILL = n depends on ACPI_VIDEO || ACPI_VIDEO = n depends on BACKLIGHT_CLASS_DEVICE -- cgit v1.2.3 From ce492b3b8f99cf9d2f807ec22d8805c996a09503 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Fri, 3 Jun 2016 14:21:34 -0700 Subject: drm/fsl-dcu: use flat regmap cache Using flat regmap cache instead of RB-tree to avoid the following lockdep warning on driver load: WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2755 lockdep_trace_alloc+0x15c/0x160() DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) The RB-tree regmap cache needs to allocate new space on first writes. However, allocations in an atomic context (e.g. when a spinlock is held) are not allowed. The function regmap_write calls map->lock, which acquires a spinlock in the fast_io case. Since the FSL DCU driver uses MMIO, the regmap bus of type regmap_mmio is being used which has fast_io set to true. Use flat regmap cache and specify max register to be large enouth to cover all registers available in LS1021a and Vybrids register space. Signed-off-by: Stefan Agner Cc: Mark Brown Cc: stable@vger.kernel.org --- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c index 0ec1ad961e0d..dc723f7ead7d 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c @@ -42,9 +42,10 @@ static const struct regmap_config fsl_dcu_regmap_config = { .reg_bits = 32, .reg_stride = 4, .val_bits = 32, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_FLAT, .volatile_reg = fsl_dcu_drm_is_volatile_reg, + .max_register = 0x11fc, }; static int fsl_dcu_drm_irq_init(struct drm_device *dev) -- cgit v1.2.3 From 85332739628fe4beafecdb713438c7cb1454c2f5 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 3 Jun 2016 14:27:03 +0300 Subject: drm/omap: fix unused variable warning in dsi & hdmi Signed-off-by: Tomi Valkeinen Signed-off-by: Dave Airlie --- drivers/gpu/drm/omapdrm/dss/dsi.c | 1 - drivers/gpu/drm/omapdrm/dss/hdmi5.c | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c index 9ed8272e54ae..56c43f355ce3 100644 --- a/drivers/gpu/drm/omapdrm/dss/dsi.c +++ b/drivers/gpu/drm/omapdrm/dss/dsi.c @@ -1167,7 +1167,6 @@ static int dsi_regulator_init(struct platform_device *dsidev) { struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); struct regulator *vdds_dsi; - int r; if (dsi->vdds_dsi_reg != NULL) return 0; diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5.c b/drivers/gpu/drm/omapdrm/dss/hdmi5.c index e129245eb8a9..9255c0e1e4a7 100644 --- a/drivers/gpu/drm/omapdrm/dss/hdmi5.c +++ b/drivers/gpu/drm/omapdrm/dss/hdmi5.c @@ -120,7 +120,6 @@ static irqreturn_t hdmi_irq_handler(int irq, void *data) static int hdmi_init_regulator(void) { - int r; struct regulator *reg; if (hdmi.vdda_reg != NULL) -- cgit v1.2.3 From 72d8c36ec364c82bf1bf0c64dfa1041cfaf139f7 Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Tue, 7 Jun 2016 14:53:56 +0800 Subject: scsi: fix race between simultaneous decrements of ->host_failed sas_ata_strategy_handler() adds the works of the ata error handler to system_unbound_wq. This workqueue asynchronously runs work items, so the ata error handler will be performed concurrently on different CPUs. In this case, ->host_failed will be decreased simultaneously in scsi_eh_finish_cmd() on different CPUs, and become abnormal. It will lead to permanently inequality between ->host_failed and ->host_busy, and scsi error handler thread won't start running. IO errors after that won't be handled. Since all scmds must have been handled in the strategy handler, just remove the decrement in scsi_eh_finish_cmd() and zero ->host_busy after the strategy handler to fix this race. Fixes: 50824d6c5657 ("[SCSI] libsas: async ata-eh") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang Reviewed-by: James Bottomley Signed-off-by: Martin K. Petersen --- Documentation/scsi/scsi_eh.txt | 8 ++++++-- drivers/ata/libata-eh.c | 2 +- drivers/scsi/scsi_error.c | 4 +++- 3 files changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt index 8638f61c8c9d..37eca00796ee 100644 --- a/Documentation/scsi/scsi_eh.txt +++ b/Documentation/scsi/scsi_eh.txt @@ -263,19 +263,23 @@ scmd->allowed. 3. scmd recovered ACTION: scsi_eh_finish_cmd() is invoked to EH-finish scmd - - shost->host_failed-- - clear scmd->eh_eflags - scsi_setup_cmd_retry() - move from local eh_work_q to local eh_done_q LOCKING: none + CONCURRENCY: at most one thread per separate eh_work_q to + keep queue manipulation lockless 4. EH completes ACTION: scsi_eh_flush_done_q() retries scmds or notifies upper - layer of failure. + layer of failure. May be called concurrently but must have + a no more than one thread per separate eh_work_q to + manipulate the queue locklessly - scmd is removed from eh_done_q and scmd->eh_entry is cleared - if retry is necessary, scmd is requeued using scsi_queue_insert() - otherwise, scsi_finish_command() is invoked for scmd + - zero shost->host_failed LOCKING: queue or finish function performs appropriate locking diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 961acc788f44..91a9e6af2ec4 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -606,7 +606,7 @@ void ata_scsi_error(struct Scsi_Host *host) ata_scsi_port_error_handler(host, ap); /* finish or retry handled scmd's and clean up */ - WARN_ON(host->host_failed || !list_empty(&eh_work_q)); + WARN_ON(!list_empty(&eh_work_q)); DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 984ddcb4786d..1b9c049bd5c5 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1127,7 +1127,6 @@ static int scsi_eh_action(struct scsi_cmnd *scmd, int rtn) */ void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q) { - scmd->device->host->host_failed--; scmd->eh_eflags = 0; list_move_tail(&scmd->eh_entry, done_q); } @@ -2226,6 +2225,9 @@ int scsi_error_handler(void *data) else scsi_unjam_host(shost); + /* All scmds have been handled */ + shost->host_failed = 0; + /* * Note - if the above fails completely, the action is to take * individual devices offline and flush the queue of any -- cgit v1.2.3 From d1a7f7aadc866eff61c422da0ecbe1f8e383e0f5 Mon Sep 17 00:00:00 2001 From: Ken Wang Date: Tue, 24 May 2016 09:26:27 +0800 Subject: drm/amdgpu/iceland: Set SC_PA_RASTER_CONFIG according to different RB enabled fix the raster config setting for different iceland configs. Signed-off-by: Ken Wang Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index f19bab68fd83..4d747ba331db 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -3974,11 +3974,15 @@ static int gfx_v8_0_cp_gfx_start(struct amdgpu_device *adev) amdgpu_ring_write(ring, 0x3a00161a); amdgpu_ring_write(ring, 0x0000002e); break; - case CHIP_TOPAZ: case CHIP_CARRIZO: amdgpu_ring_write(ring, 0x00000002); amdgpu_ring_write(ring, 0x00000000); break; + case CHIP_TOPAZ: + amdgpu_ring_write(ring, adev->gfx.config.num_rbs == 1 ? + 0x00000000 : 0x00000002); + amdgpu_ring_write(ring, 0x00000000); + break; case CHIP_STONEY: amdgpu_ring_write(ring, 0x00000000); amdgpu_ring_write(ring, 0x00000000); -- cgit v1.2.3 From 8b4af8a8e3e6ad82e0d32d1665d9a755c05c4c12 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 23 May 2016 18:24:41 +0800 Subject: drm/admgpu/powerplay/polaris: fix powertune table upload Exclude AVFS related fields when update powertune table to hw. The driver shouldn't set them directly. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_powertune.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_powertune.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_powertune.c index 0b99ab3ba0c5..ae96f14b827c 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_powertune.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_powertune.c @@ -286,7 +286,7 @@ int polaris10_populate_pm_fuses(struct pp_hwmgr *hwmgr) if (polaris10_copy_bytes_to_smc(hwmgr->smumgr, pm_fuse_table_offset, (uint8_t *)&data->power_tune_table, - sizeof(struct SMU74_Discrete_PmFuses), data->sram_end)) + (sizeof(struct SMU74_Discrete_PmFuses) - 92), data->sram_end)) PP_ASSERT_WITH_CODE(false, "Attempt to download PmFuseTable Failed!", return -EINVAL); -- cgit v1.2.3 From 212cb3b6d79bb9f525da5593133d93b107184b27 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Thu, 19 May 2016 14:35:17 +0800 Subject: drm/amdgpu: add late_fini for ip_funcs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This give IP modules an optional late cleanup function. This is needed to handle tricky inter-module dependencies during tear down. Signed-off-by: Monk Liu Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/include/amd_shared.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/include/amd_shared.h b/drivers/gpu/drm/amd/include/amd_shared.h index 6080951d539d..afce1edbe250 100644 --- a/drivers/gpu/drm/amd/include/amd_shared.h +++ b/drivers/gpu/drm/amd/include/amd_shared.h @@ -157,6 +157,7 @@ struct amd_ip_funcs { int (*hw_init)(void *handle); /* tears down the hw state */ int (*hw_fini)(void *handle); + void (*late_fini)(void *handle); /* handles IP specific hw/sw changes for suspend */ int (*suspend)(void *handle); /* handles IP specific hw/sw changes for resume */ -- cgit v1.2.3 From 482587e3145ef4100b52946660ae52b457d09194 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Thu, 19 May 2016 14:36:01 +0800 Subject: drm/amdgpu: impl late_fini for amdgpu_pp_ip MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This implements late_init support for powerplay. Signed-off-by: Monk Liu Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c index 6bd961fb43dc..1cd53c65918b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c @@ -223,6 +223,22 @@ static int amdgpu_pp_hw_fini(void *handle) return ret; } +static void amdgpu_pp_late_fini(void *handle) +{ + struct amdgpu_device *adev = (struct amdgpu_device *)handle; + +#ifdef CONFIG_DRM_AMD_POWERPLAY + if (adev->pp_enabled) { + amdgpu_pm_sysfs_fini(adev); + amd_powerplay_fini(adev->powerplay.pp_handle); + } + + if (adev->powerplay.ip_funcs->late_fini) + adev->powerplay.ip_funcs->late_fini( + adev->powerplay.pp_handle); +#endif +} + static int amdgpu_pp_suspend(void *handle) { int ret = 0; @@ -311,6 +327,7 @@ const struct amd_ip_funcs amdgpu_pp_ip_funcs = { .sw_fini = amdgpu_pp_sw_fini, .hw_init = amdgpu_pp_hw_init, .hw_fini = amdgpu_pp_hw_fini, + .late_fini = amdgpu_pp_late_fini, .suspend = amdgpu_pp_suspend, .resume = amdgpu_pp_resume, .is_idle = amdgpu_pp_is_idle, -- cgit v1.2.3 From a6dcfd9cc55432e4dcbe058d6ae9f07fb3452992 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Thu, 19 May 2016 14:36:34 +0800 Subject: drm/amdgpu: fix pplib finish bug MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 1,should use late_fini to kfree all resource otherwise the released pointer maybe accessed in IRQ ip fini routine. 2,hwmgr should not be kfree by pem_fini which is invoked by hw fini path. Signed-off-by: Monk Liu Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 5 +++++ drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c | 7 ------- drivers/gpu/drm/amd/powerplay/eventmgr/eventmgr.c | 3 --- 3 files changed, 5 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index bb8b149786d7..1996670b6751 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1325,6 +1325,11 @@ static int amdgpu_fini(struct amdgpu_device *adev) adev->ip_block_status[i].valid = false; } + for (i = adev->num_ip_blocks - 1; i >= 0; i--) { + if (adev->ip_blocks[i].funcs->late_fini) + adev->ip_blocks[i].funcs->late_fini((void *)adev); + } + return 0; } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c index 1cd53c65918b..10b1be51318b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c @@ -183,13 +183,6 @@ static int amdgpu_pp_sw_fini(void *handle) if (ret) return ret; -#ifdef CONFIG_DRM_AMD_POWERPLAY - if (adev->pp_enabled) { - amdgpu_pm_sysfs_fini(adev); - amd_powerplay_fini(adev->powerplay.pp_handle); - } -#endif - return ret; } diff --git a/drivers/gpu/drm/amd/powerplay/eventmgr/eventmgr.c b/drivers/gpu/drm/amd/powerplay/eventmgr/eventmgr.c index 46410e3c7349..fb88e4e5d625 100644 --- a/drivers/gpu/drm/amd/powerplay/eventmgr/eventmgr.c +++ b/drivers/gpu/drm/amd/powerplay/eventmgr/eventmgr.c @@ -58,9 +58,6 @@ static void pem_fini(struct pp_eventmgr *eventmgr) pem_unregister_interrupts(eventmgr); pem_handle_event(eventmgr, AMD_PP_EVENT_UNINITIALIZE, &event_data); - - if (eventmgr != NULL) - kfree(eventmgr); } int eventmgr_init(struct pp_instance *handle) -- cgit v1.2.3 From 768c95e70c4bd33b3da32a15dd33486246f4ca79 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 1 Jun 2016 11:09:01 -0400 Subject: drm/amdgpu: fix fw leak in non-powerplay dpm code We need to release the firmware on driver tear down. Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/ci_dpm.c | 3 +++ drivers/gpu/drm/amd/amdgpu/fiji_dpm.c | 5 +++++ drivers/gpu/drm/amd/amdgpu/iceland_dpm.c | 5 +++++ drivers/gpu/drm/amd/amdgpu/tonga_dpm.c | 5 +++++ 4 files changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c index ea407db1fbcf..5ec1f1e9c983 100644 --- a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c @@ -6221,6 +6221,9 @@ static int ci_dpm_sw_fini(void *handle) ci_dpm_fini(adev); mutex_unlock(&adev->pm.mutex); + release_firmware(adev->pm.fw); + adev->pm.fw = NULL; + return 0; } diff --git a/drivers/gpu/drm/amd/amdgpu/fiji_dpm.c b/drivers/gpu/drm/amd/amdgpu/fiji_dpm.c index 245cabf06575..ed03b75175d4 100644 --- a/drivers/gpu/drm/amd/amdgpu/fiji_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/fiji_dpm.c @@ -72,6 +72,11 @@ static int fiji_dpm_sw_init(void *handle) static int fiji_dpm_sw_fini(void *handle) { + struct amdgpu_device *adev = (struct amdgpu_device *)handle; + + release_firmware(adev->pm.fw); + adev->pm.fw = NULL; + return 0; } diff --git a/drivers/gpu/drm/amd/amdgpu/iceland_dpm.c b/drivers/gpu/drm/amd/amdgpu/iceland_dpm.c index 460bc8ad37e6..825ccd63f2dc 100644 --- a/drivers/gpu/drm/amd/amdgpu/iceland_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/iceland_dpm.c @@ -72,6 +72,11 @@ static int iceland_dpm_sw_init(void *handle) static int iceland_dpm_sw_fini(void *handle) { + struct amdgpu_device *adev = (struct amdgpu_device *)handle; + + release_firmware(adev->pm.fw); + adev->pm.fw = NULL; + return 0; } diff --git a/drivers/gpu/drm/amd/amdgpu/tonga_dpm.c b/drivers/gpu/drm/amd/amdgpu/tonga_dpm.c index b7615cefcac4..f06f6f4dc3a8 100644 --- a/drivers/gpu/drm/amd/amdgpu/tonga_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/tonga_dpm.c @@ -71,6 +71,11 @@ static int tonga_dpm_sw_init(void *handle) static int tonga_dpm_sw_fini(void *handle) { + struct amdgpu_device *adev = (struct amdgpu_device *)handle; + + release_firmware(adev->pm.fw); + adev->pm.fw = NULL; + return 0; } -- cgit v1.2.3 From 9a005bef5b5b5ceb78ff1138e6d6baf4bbeb8061 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Wed, 25 May 2016 16:55:07 +0800 Subject: drm/amdgpu: clear SA bo when created MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This help fix reloading driver hang issue of SDMA ring Signed-off-by: Monk Liu Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_sa.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_sa.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_sa.c index 8bf84efafb04..48618ee324eb 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_sa.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_sa.c @@ -115,6 +115,7 @@ int amdgpu_sa_bo_manager_start(struct amdgpu_device *adev, return r; } r = amdgpu_bo_kmap(sa_manager->bo, &sa_manager->cpu_ptr); + memset(sa_manager->cpu_ptr, 0, sa_manager->size); amdgpu_bo_unreserve(sa_manager->bo); return r; } -- cgit v1.2.3 From d72f7c0685870aa7efda0a06f8ca160a94905031 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Wed, 25 May 2016 16:55:50 +0800 Subject: drm/amdgpu: init more register for sdma MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This help fix reloading driver hang issue of SDMA ring Signed-off-by: Monk Liu Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/cik_sdma.c | 2 ++ drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c | 2 ++ drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c | 2 ++ 3 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c index 518dca43b133..76f73ab9294e 100644 --- a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c +++ b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c @@ -419,6 +419,8 @@ static int cik_sdma_gfx_resume(struct amdgpu_device *adev) /* Initialize the ring buffer's read and write pointers */ WREG32(mmSDMA0_GFX_RB_RPTR + sdma_offsets[i], 0); WREG32(mmSDMA0_GFX_RB_WPTR + sdma_offsets[i], 0); + WREG32(mmSDMA0_GFX_IB_RPTR + sdma_offsets[i], 0); + WREG32(mmSDMA0_GFX_IB_OFFSET + sdma_offsets[i], 0); /* set the wb address whether it's enabled or not */ WREG32(mmSDMA0_GFX_RB_RPTR_ADDR_HI + sdma_offsets[i], diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c index f4c3130d3fdb..e11a37416e19 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c @@ -461,6 +461,8 @@ static int sdma_v2_4_gfx_resume(struct amdgpu_device *adev) /* Initialize the ring buffer's read and write pointers */ WREG32(mmSDMA0_GFX_RB_RPTR + sdma_offsets[i], 0); WREG32(mmSDMA0_GFX_RB_WPTR + sdma_offsets[i], 0); + WREG32(mmSDMA0_GFX_IB_RPTR + sdma_offsets[i], 0); + WREG32(mmSDMA0_GFX_IB_OFFSET + sdma_offsets[i], 0); /* set the wb address whether it's enabled or not */ WREG32(mmSDMA0_GFX_RB_RPTR_ADDR_HI + sdma_offsets[i], diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c index 31d99b0010f7..585d8fe22bae 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c @@ -672,6 +672,8 @@ static int sdma_v3_0_gfx_resume(struct amdgpu_device *adev) /* Initialize the ring buffer's read and write pointers */ WREG32(mmSDMA0_GFX_RB_RPTR + sdma_offsets[i], 0); WREG32(mmSDMA0_GFX_RB_WPTR + sdma_offsets[i], 0); + WREG32(mmSDMA0_GFX_IB_RPTR + sdma_offsets[i], 0); + WREG32(mmSDMA0_GFX_IB_OFFSET + sdma_offsets[i], 0); /* set the wb address whether it's enabled or not */ WREG32(mmSDMA0_GFX_RB_RPTR_ADDR_HI + sdma_offsets[i], -- cgit v1.2.3 From 505dfe76cd3203bb2dcf13d862f46b7f0e95869a Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Wed, 25 May 2016 16:57:14 +0800 Subject: drm/amdgpu: modify sdma start sequence MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit should fist halt engine, and then doing the register programing, and later unhalt engine, and finally run ring_test. this help fix reloading driver hang issue of SDMA ring original sequence is wrong for it programing engine after unhalt, which will lead to fault behavior when doing driver reloading after unloaded. Signed-off-by: Monk Liu Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/cik_sdma.c | 9 +++++++-- drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c | 8 ++++++-- drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c | 15 +++++++++++---- 3 files changed, 24 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c index 76f73ab9294e..0079916e6d93 100644 --- a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c +++ b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c @@ -448,7 +448,12 @@ static int cik_sdma_gfx_resume(struct amdgpu_device *adev) WREG32(mmSDMA0_GFX_IB_CNTL + sdma_offsets[i], ib_cntl); ring->ready = true; + } + + cik_sdma_enable(adev, true); + for (i = 0; i < adev->sdma.num_instances; i++) { + ring = &adev->sdma.instance[i].ring; r = amdgpu_ring_test_ring(ring); if (r) { ring->ready = false; @@ -531,8 +536,8 @@ static int cik_sdma_start(struct amdgpu_device *adev) if (r) return r; - /* unhalt the MEs */ - cik_sdma_enable(adev, true); + /* halt the engine before programing */ + cik_sdma_enable(adev, false); /* start the gfx rings and rlc compute queues */ r = cik_sdma_gfx_resume(adev); diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c index e11a37416e19..f6014b024f2a 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c @@ -491,7 +491,11 @@ static int sdma_v2_4_gfx_resume(struct amdgpu_device *adev) WREG32(mmSDMA0_GFX_IB_CNTL + sdma_offsets[i], ib_cntl); ring->ready = true; + } + sdma_v2_4_enable(adev, true); + for (i = 0; i < adev->sdma.num_instances; i++) { + ring = &adev->sdma.instance[i].ring; r = amdgpu_ring_test_ring(ring); if (r) { ring->ready = false; @@ -582,8 +586,8 @@ static int sdma_v2_4_start(struct amdgpu_device *adev) return -EINVAL; } - /* unhalt the MEs */ - sdma_v2_4_enable(adev, true); + /* halt the engine before programing */ + sdma_v2_4_enable(adev, false); /* start the gfx rings and rlc compute queues */ r = sdma_v2_4_gfx_resume(adev); diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c index 585d8fe22bae..33605d4ac2d9 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c @@ -713,7 +713,15 @@ static int sdma_v3_0_gfx_resume(struct amdgpu_device *adev) WREG32(mmSDMA0_GFX_IB_CNTL + sdma_offsets[i], ib_cntl); ring->ready = true; + } + /* unhalt the MEs */ + sdma_v3_0_enable(adev, true); + /* enable sdma ring preemption */ + sdma_v3_0_ctx_switch_enable(adev, true); + + for (i = 0; i < adev->sdma.num_instances; i++) { + ring = &adev->sdma.instance[i].ring; r = amdgpu_ring_test_ring(ring); if (r) { ring->ready = false; @@ -806,10 +814,9 @@ static int sdma_v3_0_start(struct amdgpu_device *adev) } } - /* unhalt the MEs */ - sdma_v3_0_enable(adev, true); - /* enable sdma ring preemption */ - sdma_v3_0_ctx_switch_enable(adev, true); + /* disble sdma engine before programing it */ + sdma_v3_0_ctx_switch_enable(adev, false); + sdma_v3_0_enable(adev, false); /* start the gfx rings and rlc compute queues */ r = sdma_v3_0_gfx_resume(adev); -- cgit v1.2.3 From fdff8cfa72b3e42d4d0c70684fa18b1dfee46d97 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Tue, 24 May 2016 13:23:46 +0800 Subject: drm/amdgpu: vBIOS post only call when mem_size zero MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 1996670b6751..1727a4d998a4 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1518,8 +1518,7 @@ int amdgpu_device_init(struct amdgpu_device *adev, amdgpu_atombios_has_gpu_virtualization_table(adev); /* Post card if necessary */ - if (!amdgpu_card_posted(adev) || - adev->virtualization.supports_sr_iov) { + if (!amdgpu_card_posted(adev)) { if (!adev->bios) { dev_err(adev->dev, "Card not posted and no BIOS - ignoring\n"); return -EINVAL; -- cgit v1.2.3 From 2ba272d7bde27e1db2cf1c6cee49b01b7ea08989 Mon Sep 17 00:00:00 2001 From: Chunming Zhou Date: Wed, 27 Apr 2016 18:07:41 +0800 Subject: drm/amdgpu: add pipeline sync while vmid switch in same ctx Since vmid-mgr supports vmid sharing in one vm, the same ctx could get different vmids for two emits without vm flush, vm_flush could be done in another ring. Signed-off-by: Chunming Zhou Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 4 +++- drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c | 9 +++++++-- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 6 +++--- 3 files changed, 13 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 992f00b65be4..01c36b8d6222 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -799,6 +799,7 @@ struct amdgpu_ring { unsigned cond_exe_offs; u64 cond_exe_gpu_addr; volatile u32 *cond_exe_cpu_addr; + int vmid; }; /* @@ -936,7 +937,8 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, unsigned vm_id, uint64_t pd_addr, uint32_t gds_base, uint32_t gds_size, uint32_t gws_base, uint32_t gws_size, - uint32_t oa_base, uint32_t oa_size); + uint32_t oa_base, uint32_t oa_size, + bool vmid_switch); void amdgpu_vm_reset_id(struct amdgpu_device *adev, unsigned vm_id); uint64_t amdgpu_vm_map_gart(const dma_addr_t *pages_addr, uint64_t addr); int amdgpu_vm_update_page_directory(struct amdgpu_device *adev, diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c index 34e35423b78e..7a0b1e50f293 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c @@ -122,6 +122,7 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, bool skip_preamble, need_ctx_switch; unsigned patch_offset = ~0; struct amdgpu_vm *vm; + int vmid = 0, old_vmid = ring->vmid; struct fence *hwf; uint64_t ctx; @@ -135,9 +136,11 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, if (job) { vm = job->vm; ctx = job->ctx; + vmid = job->vm_id; } else { vm = NULL; ctx = 0; + vmid = 0; } if (!ring->ready) { @@ -163,7 +166,8 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, r = amdgpu_vm_flush(ring, job->vm_id, job->vm_pd_addr, job->gds_base, job->gds_size, job->gws_base, job->gws_size, - job->oa_base, job->oa_size); + job->oa_base, job->oa_size, + (ring->current_ctx == ctx) && (old_vmid != vmid)); if (r) { amdgpu_ring_undo(ring); return r; @@ -180,7 +184,6 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, need_ctx_switch = ring->current_ctx != ctx; for (i = 0; i < num_ibs; ++i) { ib = &ibs[i]; - /* drop preamble IBs if we don't have a context switch */ if ((ib->flags & AMDGPU_IB_FLAG_PREAMBLE) && skip_preamble) continue; @@ -188,6 +191,7 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, amdgpu_ring_emit_ib(ring, ib, job ? job->vm_id : 0, need_ctx_switch); need_ctx_switch = false; + ring->vmid = vmid; } if (ring->funcs->emit_hdp_invalidate) @@ -198,6 +202,7 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, dev_err(adev->dev, "failed to emit fence (%d)\n", r); if (job && job->vm_id) amdgpu_vm_reset_id(adev, job->vm_id); + ring->vmid = old_vmid; amdgpu_ring_undo(ring); return r; } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 9f36ed30ba11..62a4c127620f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -298,7 +298,8 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, unsigned vm_id, uint64_t pd_addr, uint32_t gds_base, uint32_t gds_size, uint32_t gws_base, uint32_t gws_size, - uint32_t oa_base, uint32_t oa_size) + uint32_t oa_base, uint32_t oa_size, + bool vmid_switch) { struct amdgpu_device *adev = ring->adev; struct amdgpu_vm_id *id = &adev->vm_manager.ids[vm_id]; @@ -312,8 +313,7 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, int r; if (ring->funcs->emit_pipeline_sync && ( - pd_addr != AMDGPU_VM_NO_FLUSH || gds_switch_needed || - ring->type == AMDGPU_RING_TYPE_COMPUTE)) + pd_addr != AMDGPU_VM_NO_FLUSH || gds_switch_needed || vmid_switch)) amdgpu_ring_emit_pipeline_sync(ring); if (ring->funcs->emit_vm_flush && -- cgit v1.2.3 From 3a3e88804d44e41ef2182d2a6577a6803fdd9ee0 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Fri, 27 May 2016 17:52:58 +0800 Subject: drm/amdgpu: fix mem leak in smumgr MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c index c483baf6b4fb..0728c1e3d97a 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c @@ -81,6 +81,7 @@ int smum_init(struct amd_pp_init *pp_init, struct pp_instance *handle) int smum_fini(struct pp_smumgr *smumgr) { + kfree(smumgr->device); kfree(smumgr); return 0; } -- cgit v1.2.3 From 61da601b95cd5565d047e42e73f984f5bdfbba70 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Fri, 27 May 2016 19:09:06 +0800 Subject: drm/amdgpu: fix mem leak in pplib/hwmgr MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 1c48917da3cf..910d56dcd7b1 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -93,6 +93,13 @@ int hwmgr_fini(struct pp_hwmgr *hwmgr) if (hwmgr == NULL || hwmgr->ps == NULL) return -EINVAL; + /* do hwmgr finish*/ + kfree(hwmgr->backend); + + kfree(hwmgr->start_thermal_controller.function_list); + + kfree(hwmgr->set_temperature_range.function_list); + kfree(hwmgr->ps); kfree(hwmgr); return 0; -- cgit v1.2.3 From 89e0ec9f5e27a8c5b5954290bef703dc6aac44f3 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Fri, 27 May 2016 19:34:11 +0800 Subject: drm/amdgpu: fix mem leak in atombios MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 1727a4d998a4..964f31404f17 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -827,8 +827,10 @@ static uint32_t cail_ioreg_read(struct card_info *info, uint32_t reg) */ static void amdgpu_atombios_fini(struct amdgpu_device *adev) { - if (adev->mode_info.atom_context) + if (adev->mode_info.atom_context) { kfree(adev->mode_info.atom_context->scratch); + kfree(adev->mode_info.atom_context->iio); + } kfree(adev->mode_info.atom_context); adev->mode_info.atom_context = NULL; kfree(adev->mode_info.atom_card_info); -- cgit v1.2.3 From 9d8f086cd05954e03f10db1a9a52a240d086dc8c Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Mon, 30 May 2016 13:43:45 +0800 Subject: drm/amdgpu: fix memleak in pptable_init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Acked-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 8 +++- .../amd/powerplay/hwmgr/tonga_processpptables.c | 54 ++++++++++------------ 2 files changed, 32 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c index 8e345bfddb69..e629f8a9fe93 100644 --- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c +++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c @@ -73,11 +73,14 @@ static int pp_sw_init(void *handle) ret = hwmgr->hwmgr_func->backend_init(hwmgr); if (ret) - goto err; + goto err1; pr_info("amdgpu: powerplay initialized\n"); return 0; +err1: + if (hwmgr->pptable_func->pptable_fini) + hwmgr->pptable_func->pptable_fini(hwmgr); err: pr_err("amdgpu: powerplay initialization failed\n"); return ret; @@ -100,6 +103,9 @@ static int pp_sw_fini(void *handle) if (hwmgr->hwmgr_func->backend_fini != NULL) ret = hwmgr->hwmgr_func->backend_fini(hwmgr); + if (hwmgr->pptable_func->pptable_fini) + hwmgr->pptable_func->pptable_fini(hwmgr); + return ret; } diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_processpptables.c b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_processpptables.c index 10e3630ee39d..296ec7ef6d45 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_processpptables.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_processpptables.c @@ -1040,48 +1040,44 @@ int tonga_pp_tables_uninitialize(struct pp_hwmgr *hwmgr) struct phm_ppt_v1_information *pp_table_information = (struct phm_ppt_v1_information *)(hwmgr->pptable); - if (NULL != hwmgr->soft_pp_table) { - kfree(hwmgr->soft_pp_table); + if (NULL != hwmgr->soft_pp_table) hwmgr->soft_pp_table = NULL; - } - if (NULL != pp_table_information->vdd_dep_on_sclk) - pp_table_information->vdd_dep_on_sclk = NULL; + kfree(pp_table_information->vdd_dep_on_sclk); + pp_table_information->vdd_dep_on_sclk = NULL; - if (NULL != pp_table_information->vdd_dep_on_mclk) - pp_table_information->vdd_dep_on_mclk = NULL; + kfree(pp_table_information->vdd_dep_on_mclk); + pp_table_information->vdd_dep_on_mclk = NULL; - if (NULL != pp_table_information->valid_mclk_values) - pp_table_information->valid_mclk_values = NULL; + kfree(pp_table_information->valid_mclk_values); + pp_table_information->valid_mclk_values = NULL; - if (NULL != pp_table_information->valid_sclk_values) - pp_table_information->valid_sclk_values = NULL; + kfree(pp_table_information->valid_sclk_values); + pp_table_information->valid_sclk_values = NULL; - if (NULL != pp_table_information->vddc_lookup_table) - pp_table_information->vddc_lookup_table = NULL; + kfree(pp_table_information->vddc_lookup_table); + pp_table_information->vddc_lookup_table = NULL; - if (NULL != pp_table_information->vddgfx_lookup_table) - pp_table_information->vddgfx_lookup_table = NULL; + kfree(pp_table_information->vddgfx_lookup_table); + pp_table_information->vddgfx_lookup_table = NULL; - if (NULL != pp_table_information->mm_dep_table) - pp_table_information->mm_dep_table = NULL; + kfree(pp_table_information->mm_dep_table); + pp_table_information->mm_dep_table = NULL; - if (NULL != pp_table_information->cac_dtp_table) - pp_table_information->cac_dtp_table = NULL; + kfree(pp_table_information->cac_dtp_table); + pp_table_information->cac_dtp_table = NULL; - if (NULL != hwmgr->dyn_state.cac_dtp_table) - hwmgr->dyn_state.cac_dtp_table = NULL; + kfree(hwmgr->dyn_state.cac_dtp_table); + hwmgr->dyn_state.cac_dtp_table = NULL; - if (NULL != pp_table_information->ppm_parameter_table) - pp_table_information->ppm_parameter_table = NULL; + kfree(pp_table_information->ppm_parameter_table); + pp_table_information->ppm_parameter_table = NULL; - if (NULL != pp_table_information->pcie_table) - pp_table_information->pcie_table = NULL; + kfree(pp_table_information->pcie_table); + pp_table_information->pcie_table = NULL; - if (NULL != hwmgr->pptable) { - kfree(hwmgr->pptable); - hwmgr->pptable = NULL; - } + kfree(hwmgr->pptable); + hwmgr->pptable = NULL; return result; } -- cgit v1.2.3 From 67a6a504af90e58c478b2e7fa6c0af8ed64c995b Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Mon, 30 May 2016 14:17:42 +0800 Subject: drm/amdgpu: fix missing free wb for cond_exec MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c index 3b02272db678..870f9494252c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c @@ -343,6 +343,7 @@ void amdgpu_ring_fini(struct amdgpu_ring *ring) ring->ring = NULL; ring->ring_obj = NULL; + amdgpu_wb_free(ring->adev, ring->cond_exe_offs); amdgpu_wb_free(ring->adev, ring->fence_offs); amdgpu_wb_free(ring->adev, ring->rptr_offs); amdgpu_wb_free(ring->adev, ring->wptr_offs); -- cgit v1.2.3 From 13331ac384e8211a0bf3158a895ac8b22005a622 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Mon, 30 May 2016 14:18:57 +0800 Subject: drm/amdgpu: fix gfx8 ucode mem leak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 4d747ba331db..9f6f8669edc3 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -836,6 +836,26 @@ err1: return r; } + +static void gfx_v8_0_free_microcode(struct amdgpu_device *adev) { + release_firmware(adev->gfx.pfp_fw); + adev->gfx.pfp_fw = NULL; + release_firmware(adev->gfx.me_fw); + adev->gfx.me_fw = NULL; + release_firmware(adev->gfx.ce_fw); + adev->gfx.ce_fw = NULL; + release_firmware(adev->gfx.rlc_fw); + adev->gfx.rlc_fw = NULL; + release_firmware(adev->gfx.mec_fw); + adev->gfx.mec_fw = NULL; + if ((adev->asic_type != CHIP_STONEY) && + (adev->asic_type != CHIP_TOPAZ)) + release_firmware(adev->gfx.mec2_fw); + adev->gfx.mec2_fw = NULL; + + kfree(adev->gfx.rlc.register_list_format); +} + static int gfx_v8_0_init_microcode(struct amdgpu_device *adev) { const char *chip_name; @@ -1983,7 +2003,7 @@ static int gfx_v8_0_sw_fini(void *handle) gfx_v8_0_rlc_fini(adev); - kfree(adev->gfx.rlc.register_list_format); + gfx_v8_0_free_microcode(adev); return 0; } -- cgit v1.2.3 From e517cd77ee76a26f3542d51a1b4f4d7c452f85cf Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Mon, 30 May 2016 16:01:48 +0800 Subject: drm/amdgpu: fix gfx 7 ucode mem leak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c index 7f18a53ab53a..8c6ad1e72f02 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c @@ -991,6 +991,22 @@ out: return err; } +static void gfx_v7_0_free_microcode(struct amdgpu_device *adev) +{ + release_firmware(adev->gfx.pfp_fw); + adev->gfx.pfp_fw = NULL; + release_firmware(adev->gfx.me_fw); + adev->gfx.me_fw = NULL; + release_firmware(adev->gfx.ce_fw); + adev->gfx.ce_fw = NULL; + release_firmware(adev->gfx.mec_fw); + adev->gfx.mec_fw = NULL; + release_firmware(adev->gfx.mec2_fw); + adev->gfx.mec2_fw = NULL; + release_firmware(adev->gfx.rlc_fw); + adev->gfx.rlc_fw = NULL; +} + /** * gfx_v7_0_tiling_mode_table_init - init the hw tiling table * @@ -4489,6 +4505,7 @@ static int gfx_v7_0_sw_fini(void *handle) gfx_v7_0_cp_compute_fini(adev); gfx_v7_0_rlc_fini(adev); gfx_v7_0_mec_fini(adev); + gfx_v7_0_free_microcode(adev); return 0; } -- cgit v1.2.3 From 05f19eb5bd1d46aeeeb86a2a8538f35d7d55eb34 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Mon, 30 May 2016 15:13:59 +0800 Subject: drm/amdgpu: fix uvd fini mem leak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index 01abfc21b4a2..e19520c4b4b6 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -253,19 +253,20 @@ int amdgpu_uvd_sw_fini(struct amdgpu_device *adev) { int r; - if (adev->uvd.vcpu_bo == NULL) - return 0; + kfree(adev->uvd.saved_bo); amd_sched_entity_fini(&adev->uvd.ring.sched, &adev->uvd.entity); - r = amdgpu_bo_reserve(adev->uvd.vcpu_bo, false); - if (!r) { - amdgpu_bo_kunmap(adev->uvd.vcpu_bo); - amdgpu_bo_unpin(adev->uvd.vcpu_bo); - amdgpu_bo_unreserve(adev->uvd.vcpu_bo); - } + if (adev->uvd.vcpu_bo) { + r = amdgpu_bo_reserve(adev->uvd.vcpu_bo, false); + if (!r) { + amdgpu_bo_kunmap(adev->uvd.vcpu_bo); + amdgpu_bo_unpin(adev->uvd.vcpu_bo); + amdgpu_bo_unreserve(adev->uvd.vcpu_bo); + } - amdgpu_bo_unref(&adev->uvd.vcpu_bo); + amdgpu_bo_unref(&adev->uvd.vcpu_bo); + } amdgpu_ring_fini(&adev->uvd.ring); -- cgit v1.2.3 From 14d83e78c578a6c45163fb399ee760fe0d314bad Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Mon, 30 May 2016 15:15:32 +0800 Subject: drm/amdgpu: fix sdma3 ucode mem leak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c index 33605d4ac2d9..532ea88da66a 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c @@ -236,6 +236,15 @@ static void sdma_v3_0_init_golden_registers(struct amdgpu_device *adev) } } +static void sdma_v3_0_free_microcode(struct amdgpu_device *adev) +{ + int i; + for (i = 0; i < adev->sdma.num_instances; i++) { + release_firmware(adev->sdma.instance[i].fw); + adev->sdma.instance[i].fw = NULL; + } +} + /** * sdma_v3_0_init_microcode - load ucode images from disk * @@ -1256,6 +1265,7 @@ static int sdma_v3_0_sw_fini(void *handle) for (i = 0; i < adev->sdma.num_instances; i++) amdgpu_ring_fini(&adev->sdma.instance[i].ring); + sdma_v3_0_free_microcode(adev); return 0; } -- cgit v1.2.3 From 9c55c5204445689c1d6b7b60e89de7f8fcf8a77f Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Mon, 30 May 2016 16:05:58 +0800 Subject: drm/amdgpu: fix sdma24 ucode mem leak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c index f6014b024f2a..b556bd0a8797 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c @@ -105,6 +105,15 @@ static void sdma_v2_4_init_golden_registers(struct amdgpu_device *adev) } } +static void sdma_v2_4_free_microcode(struct amdgpu_device *adev) +{ + int i; + for (i = 0; i < adev->sdma.num_instances; i++) { + release_firmware(adev->sdma.instance[i].fw); + adev->sdma.instance[i].fw = NULL; + } +} + /** * sdma_v2_4_init_microcode - load ucode images from disk * @@ -1018,6 +1027,7 @@ static int sdma_v2_4_sw_fini(void *handle) for (i = 0; i < adev->sdma.num_instances; i++) amdgpu_ring_fini(&adev->sdma.instance[i].ring); + sdma_v2_4_free_microcode(adev); return 0; } -- cgit v1.2.3 From d1ff53b7c2aa6e8c9dbd37ea7d858eeaba1ecb4a Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Mon, 30 May 2016 16:07:40 +0800 Subject: drm/amdgpu: fix cik sdma ucode memleak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/cik_sdma.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c index 0079916e6d93..9dc4e24e31e7 100644 --- a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c +++ b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c @@ -66,6 +66,16 @@ MODULE_FIRMWARE("radeon/mullins_sdma1.bin"); u32 amdgpu_cik_gpu_check_soft_reset(struct amdgpu_device *adev); + +static void cik_sdma_free_microcode(struct amdgpu_device *adev) +{ + int i; + for (i = 0; i < adev->sdma.num_instances; i++) { + release_firmware(adev->sdma.instance[i].fw); + adev->sdma.instance[i].fw = NULL; + } +} + /* * sDMA - System DMA * Starting with CIK, the GPU has new asynchronous @@ -1005,6 +1015,7 @@ static int cik_sdma_sw_fini(void *handle) for (i = 0; i < adev->sdma.num_instances; i++) amdgpu_ring_fini(&adev->sdma.instance[i].ring); + cik_sdma_free_microcode(adev); return 0; } -- cgit v1.2.3 From e6232effab9091472689b1c5604a7e59d320a8e0 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Mon, 30 May 2016 15:16:04 +0800 Subject: drm/amdgpu: fix fiji smu fini mem leak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Acked-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c index 673a75c74e18..0ac864200283 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c @@ -1006,6 +1006,10 @@ static int fiji_smu_init(struct pp_smumgr *smumgr) static int fiji_smu_fini(struct pp_smumgr *smumgr) { + struct fiji_smumgr *priv = (struct fiji_smumgr *)(smumgr->backend); + + smu_free_memory(smumgr->device, (void *)priv->header_buffer.handle); + if (smumgr->backend) { kfree(smumgr->backend); smumgr->backend = NULL; -- cgit v1.2.3 From 86e4cdd675f489e0b3deaa3d6b75cddadd16e71c Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Mon, 30 May 2016 15:16:26 +0800 Subject: drm/amdgpu: fix tonga smu_fini mem leak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Monk Liu Acked-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c index 32820b680d88..70d3ecf27bde 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c @@ -328,6 +328,11 @@ int tonga_write_smc_sram_dword(struct pp_smumgr *smumgr, static int tonga_smu_fini(struct pp_smumgr *smumgr) { + struct tonga_smumgr *priv = (struct tonga_smumgr *)(smumgr->backend); + + smu_free_memory(smumgr->device, (void *)priv->smu_buffer.handle); + smu_free_memory(smumgr->device, (void *)priv->header_buffer.handle); + if (smumgr->backend != NULL) { kfree(smumgr->backend); smumgr->backend = NULL; -- cgit v1.2.3 From a392746a8c38de494a1a2d00c5cfd34a05449e35 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Tue, 31 May 2016 13:44:30 +0800 Subject: drm/amdgpu: add release firmware for cgs Powerplay uses cgs to load the firmware so add a function to release it as well to avoid leaking it on driver unload. Signed-off-by: Monk Liu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 12 ++++++++++++ drivers/gpu/drm/amd/include/cgs_common.h | 6 ++++++ 2 files changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index 199f76baf22c..8943099eb135 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -696,6 +696,17 @@ static uint32_t fw_type_convert(struct cgs_device *cgs_device, uint32_t fw_type) return result; } +static int amdgpu_cgs_rel_firmware(struct cgs_device *cgs_device, enum cgs_ucode_id type) +{ + CGS_FUNC_ADEV; + if ((CGS_UCODE_ID_SMU == type) || (CGS_UCODE_ID_SMU_SK == type)) { + release_firmware(adev->pm.fw); + return 0; + } + /* cannot release other firmware because they are not created by cgs */ + return -EINVAL; +} + static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, enum cgs_ucode_id type, struct cgs_firmware_info *info) @@ -1125,6 +1136,7 @@ static const struct cgs_ops amdgpu_cgs_ops = { amdgpu_cgs_pm_query_clock_limits, amdgpu_cgs_set_camera_voltages, amdgpu_cgs_get_firmware_info, + amdgpu_cgs_rel_firmware, amdgpu_cgs_set_powergating_state, amdgpu_cgs_set_clockgating_state, amdgpu_cgs_get_active_displays_info, diff --git a/drivers/gpu/drm/amd/include/cgs_common.h b/drivers/gpu/drm/amd/include/cgs_common.h index a461e155a160..7464daf89ca1 100644 --- a/drivers/gpu/drm/amd/include/cgs_common.h +++ b/drivers/gpu/drm/amd/include/cgs_common.h @@ -581,6 +581,9 @@ typedef int (*cgs_get_firmware_info)(struct cgs_device *cgs_device, enum cgs_ucode_id type, struct cgs_firmware_info *info); +typedef int (*cgs_rel_firmware)(struct cgs_device *cgs_device, + enum cgs_ucode_id type); + typedef int(*cgs_set_powergating_state)(struct cgs_device *cgs_device, enum amd_ip_block_type block_type, enum amd_powergating_state state); @@ -645,6 +648,7 @@ struct cgs_ops { cgs_set_camera_voltages_t set_camera_voltages; /* Firmware Info */ cgs_get_firmware_info get_firmware_info; + cgs_rel_firmware rel_firmware; /* cg pg interface*/ cgs_set_powergating_state set_powergating_state; cgs_set_clockgating_state set_clockgating_state; @@ -738,6 +742,8 @@ struct cgs_device CGS_CALL(set_camera_voltages,dev,mask,voltages) #define cgs_get_firmware_info(dev, type, info) \ CGS_CALL(get_firmware_info, dev, type, info) +#define cgs_rel_firmware(dev, type) \ + CGS_CALL(rel_firmware, dev, type) #define cgs_set_powergating_state(dev, block_type, state) \ CGS_CALL(set_powergating_state, dev, block_type, state) #define cgs_set_clockgating_state(dev, block_type, state) \ -- cgit v1.2.3 From 5bbc16cc7be89dbe6dd824570456c3340b6d2ef7 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Tue, 31 May 2016 13:44:48 +0800 Subject: drm/amdgpu: fix smu ucode memleak (v2) Properly release the smu ucode in powerplay. v2: agd: add polaris as well Signed-off-by: Monk Liu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c | 2 ++ drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c | 1 + drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c | 2 ++ 3 files changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c index 0ac864200283..8e52a2e82db5 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c @@ -1014,6 +1014,8 @@ static int fiji_smu_fini(struct pp_smumgr *smumgr) kfree(smumgr->backend); smumgr->backend = NULL; } + + cgs_rel_firmware(smumgr->device, CGS_UCODE_ID_SMU); return 0; } diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c index de618ead9db8..043b6ac09d5f 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c @@ -469,6 +469,7 @@ int polaris10_smu_fini(struct pp_smumgr *smumgr) kfree(smumgr->backend); smumgr->backend = NULL; } + cgs_rel_firmware(smumgr->device, CGS_UCODE_ID_SMU); return 0; } diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c index 70d3ecf27bde..b22722eabafc 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c @@ -337,6 +337,8 @@ static int tonga_smu_fini(struct pp_smumgr *smumgr) kfree(smumgr->backend); smumgr->backend = NULL; } + + cgs_rel_firmware(smumgr->device, CGS_UCODE_ID_SMU); return 0; } -- cgit v1.2.3 From d2e312183b62cde0c44af35664f3b104b247dd9c Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 2 Jun 2016 19:11:01 +0800 Subject: drm/amd/powerplay: fix bug visit array out of bounds MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rex Zhu Acked-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c | 2 +- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c index 24a16e49b571..586f73276226 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c @@ -1830,7 +1830,7 @@ static uint16_t fiji_find_closest_vddci(struct pp_hwmgr *hwmgr, uint16_t vddci) PP_ASSERT_WITH_CODE(false, "VDDCI is larger than max VDDCI in VDDCI Voltage Table!", - return vddci_table->entries[i].value); + return vddci_table->entries[i-1].value); } static int fiji_get_dependency_volt_by_clk(struct pp_hwmgr *hwmgr, diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 910d56dcd7b1..20f20e075588 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -469,7 +469,7 @@ uint16_t phm_find_closest_vddci(struct pp_atomctrl_voltage_table *vddci_table, u PP_ASSERT_WITH_CODE(false, "VDDCI is larger than max VDDCI in VDDCI Voltage Table!", - return vddci_table->entries[i].value); + return vddci_table->entries[i-1].value); } int phm_find_boot_level(void *table, -- cgit v1.2.3 From 5f96ddb4607382528ef2eb23b49ce1856fdb316d Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Fri, 3 Jun 2016 19:12:42 +0800 Subject: drm/amd/powerplay: delete useless code as pptable changed in vbios. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The vbios table changed so this code is useless now. Signed-off-by: Rex Zhu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c | 21 --------------------- 1 file changed, 21 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c index 16fed487973b..d27e8c40602a 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c @@ -2847,27 +2847,6 @@ static int tonga_setup_default_dpm_tables(struct pp_hwmgr *hwmgr) } } - /* Initialize Vddc DPM table based on allow Vddc values. And populate corresponding std values. */ - for (i = 0; i < allowed_vdd_sclk_table->count; i++) { - data->dpm_table.vddc_table.dpm_levels[i].value = allowed_vdd_mclk_table->entries[i].vddc; - /* tonga_hwmgr->dpm_table.VddcTable.dpm_levels[i].param1 = stdVoltageTable->entries[i].Leakage; */ - /* param1 is for corresponding std voltage */ - data->dpm_table.vddc_table.dpm_levels[i].enabled = 1; - } - data->dpm_table.vddc_table.count = allowed_vdd_sclk_table->count; - - if (NULL != allowed_vdd_mclk_table) { - /* Initialize Vddci DPM table based on allow Mclk values */ - for (i = 0; i < allowed_vdd_mclk_table->count; i++) { - data->dpm_table.vdd_ci_table.dpm_levels[i].value = allowed_vdd_mclk_table->entries[i].vddci; - data->dpm_table.vdd_ci_table.dpm_levels[i].enabled = 1; - data->dpm_table.mvdd_table.dpm_levels[i].value = allowed_vdd_mclk_table->entries[i].mvdd; - data->dpm_table.mvdd_table.dpm_levels[i].enabled = 1; - } - data->dpm_table.vdd_ci_table.count = allowed_vdd_mclk_table->count; - data->dpm_table.mvdd_table.count = allowed_vdd_mclk_table->count; - } - /* setup PCIE gen speed levels*/ tonga_setup_default_pcie_tables(hwmgr); -- cgit v1.2.3 From be94535f95313a013b844b563ef15ddd8fb43da8 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 9 Jun 2016 09:51:39 +0200 Subject: mlxsw: spectrum: Make split flow match firmware requirements When a port is created following a split / unsplit we need to map it to the correct module and lane, enable it and then continue to initialize its various parameters such as MTU and VLAN filters. Under certain conditions, such as trying to split ports at the bottom row of the front panel by four, we get firmware errors. After evaluating this with the firmware team it was decided to alter the split / unsplit flow, so that first all the affected ports are mapped, then enabled and finally each is initialized separately. Fix the split / unsplit flow by first mapping and enabling all the affected ports. Newer firmware versions will support both flows. Fixes: 18f1e70c4137 ("mlxsw: spectrum: Introduce port splitting") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 147 ++++++++++++++++--------- 1 file changed, 95 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 4a7273771028..cc62d4c64fb5 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -247,15 +247,23 @@ static int mlxsw_sp_port_mtu_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 mtu) return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(pmtu), pmtu_pl); } -static int mlxsw_sp_port_swid_set(struct mlxsw_sp_port *mlxsw_sp_port, u8 swid) +static int __mlxsw_sp_port_swid_set(struct mlxsw_sp *mlxsw_sp, u8 local_port, + u8 swid) { - struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; char pspa_pl[MLXSW_REG_PSPA_LEN]; - mlxsw_reg_pspa_pack(pspa_pl, swid, mlxsw_sp_port->local_port); + mlxsw_reg_pspa_pack(pspa_pl, swid, local_port); return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(pspa), pspa_pl); } +static int mlxsw_sp_port_swid_set(struct mlxsw_sp_port *mlxsw_sp_port, u8 swid) +{ + struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; + + return __mlxsw_sp_port_swid_set(mlxsw_sp, mlxsw_sp_port->local_port, + swid); +} + static int mlxsw_sp_port_vp_mode_set(struct mlxsw_sp_port *mlxsw_sp_port, bool enable) { @@ -1681,8 +1689,8 @@ static int mlxsw_sp_port_ets_init(struct mlxsw_sp_port *mlxsw_sp_port) return 0; } -static int __mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port, - bool split, u8 module, u8 width) +static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port, + bool split, u8 module, u8 width) { struct mlxsw_sp_port *mlxsw_sp_port; struct net_device *dev; @@ -1839,28 +1847,6 @@ err_port_active_vlans_alloc: return err; } -static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port, - bool split, u8 module, u8 width, u8 lane) -{ - int err; - - err = mlxsw_sp_port_module_map(mlxsw_sp, local_port, module, width, - lane); - if (err) - return err; - - err = __mlxsw_sp_port_create(mlxsw_sp, local_port, split, module, - width); - if (err) - goto err_port_create; - - return 0; - -err_port_create: - mlxsw_sp_port_module_unmap(mlxsw_sp, local_port); - return err; -} - static void mlxsw_sp_port_vports_fini(struct mlxsw_sp_port *mlxsw_sp_port) { struct net_device *dev = mlxsw_sp_port->dev; @@ -1927,7 +1913,7 @@ static int mlxsw_sp_ports_create(struct mlxsw_sp *mlxsw_sp) if (!width) continue; mlxsw_sp->port_to_module[i] = module; - err = __mlxsw_sp_port_create(mlxsw_sp, i, false, module, width); + err = mlxsw_sp_port_create(mlxsw_sp, i, false, module, width); if (err) goto err_port_create; } @@ -1948,12 +1934,85 @@ static u8 mlxsw_sp_cluster_base_port_get(u8 local_port) return local_port - offset; } +static int mlxsw_sp_port_split_create(struct mlxsw_sp *mlxsw_sp, u8 base_port, + u8 module, unsigned int count) +{ + u8 width = MLXSW_PORT_MODULE_MAX_WIDTH / count; + int err, i; + + for (i = 0; i < count; i++) { + err = mlxsw_sp_port_module_map(mlxsw_sp, base_port + i, module, + width, i * width); + if (err) + goto err_port_module_map; + } + + for (i = 0; i < count; i++) { + err = __mlxsw_sp_port_swid_set(mlxsw_sp, base_port + i, 0); + if (err) + goto err_port_swid_set; + } + + for (i = 0; i < count; i++) { + err = mlxsw_sp_port_create(mlxsw_sp, base_port + i, true, + module, width); + if (err) + goto err_port_create; + } + + return 0; + +err_port_create: + for (i--; i >= 0; i--) + mlxsw_sp_port_remove(mlxsw_sp, base_port + i); + i = count; +err_port_swid_set: + for (i--; i >= 0; i--) + __mlxsw_sp_port_swid_set(mlxsw_sp, base_port + i, + MLXSW_PORT_SWID_DISABLED_PORT); + i = count; +err_port_module_map: + for (i--; i >= 0; i--) + mlxsw_sp_port_module_unmap(mlxsw_sp, base_port + i); + return err; +} + +static void mlxsw_sp_port_unsplit_create(struct mlxsw_sp *mlxsw_sp, + u8 base_port, unsigned int count) +{ + u8 local_port, module, width = MLXSW_PORT_MODULE_MAX_WIDTH; + int i; + + /* Split by four means we need to re-create two ports, otherwise + * only one. + */ + count = count / 2; + + for (i = 0; i < count; i++) { + local_port = base_port + i * 2; + module = mlxsw_sp->port_to_module[local_port]; + + mlxsw_sp_port_module_map(mlxsw_sp, local_port, module, width, + 0); + } + + for (i = 0; i < count; i++) + __mlxsw_sp_port_swid_set(mlxsw_sp, base_port + i * 2, 0); + + for (i = 0; i < count; i++) { + local_port = base_port + i * 2; + module = mlxsw_sp->port_to_module[local_port]; + + mlxsw_sp_port_create(mlxsw_sp, local_port, false, module, + width); + } +} + static int mlxsw_sp_port_split(struct mlxsw_core *mlxsw_core, u8 local_port, unsigned int count) { struct mlxsw_sp *mlxsw_sp = mlxsw_core_driver_priv(mlxsw_core); struct mlxsw_sp_port *mlxsw_sp_port; - u8 width = MLXSW_PORT_MODULE_MAX_WIDTH / count; u8 module, cur_width, base_port; int i; int err; @@ -2001,25 +2060,16 @@ static int mlxsw_sp_port_split(struct mlxsw_core *mlxsw_core, u8 local_port, for (i = 0; i < count; i++) mlxsw_sp_port_remove(mlxsw_sp, base_port + i); - for (i = 0; i < count; i++) { - err = mlxsw_sp_port_create(mlxsw_sp, base_port + i, true, - module, width, i * width); - if (err) { - dev_err(mlxsw_sp->bus_info->dev, "Failed to create split port\n"); - goto err_port_create; - } + err = mlxsw_sp_port_split_create(mlxsw_sp, base_port, module, count); + if (err) { + dev_err(mlxsw_sp->bus_info->dev, "Failed to create split ports\n"); + goto err_port_split_create; } return 0; -err_port_create: - for (i--; i >= 0; i--) - mlxsw_sp_port_remove(mlxsw_sp, base_port + i); - for (i = 0; i < count / 2; i++) { - module = mlxsw_sp->port_to_module[base_port + i * 2]; - mlxsw_sp_port_create(mlxsw_sp, base_port + i * 2, false, - module, MLXSW_PORT_MODULE_MAX_WIDTH, 0); - } +err_port_split_create: + mlxsw_sp_port_unsplit_create(mlxsw_sp, base_port, count); return err; } @@ -2061,14 +2111,7 @@ static int mlxsw_sp_port_unsplit(struct mlxsw_core *mlxsw_core, u8 local_port) for (i = 0; i < count; i++) mlxsw_sp_port_remove(mlxsw_sp, base_port + i); - for (i = 0; i < count / 2; i++) { - module = mlxsw_sp->port_to_module[base_port + i * 2]; - err = mlxsw_sp_port_create(mlxsw_sp, base_port + i * 2, false, - module, MLXSW_PORT_MODULE_MAX_WIDTH, - 0); - if (err) - dev_err(mlxsw_sp->bus_info->dev, "Failed to reinstantiate port\n"); - } + mlxsw_sp_port_unsplit_create(mlxsw_sp, base_port, count); return 0; } -- cgit v1.2.3 From d664b41e2adf5851e4d0d39f450b2f3f808b65d6 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 9 Jun 2016 09:51:40 +0200 Subject: mlxsw: spectrum: Don't sleep during ndo_get_phys_port_name() When rtnl_fill_ifinfo() is called for a certain netdevice it queries its various parameters such as switch id and physical port name. The function might get called in an atomic context, which means the underlying driver must not sleep during the query operation. Don't query the device and sleep during ndo_get_phys_port_name(), but instead store the needed parameters in port creation time. Fixes: 2bf9a58675c5 ("mlxsw: spectrum: Add support for physical port names") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 64 +++++++++----------------- drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 5 ++ 2 files changed, 26 insertions(+), 43 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index cc62d4c64fb5..6f9e3ddff4a8 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -313,9 +313,9 @@ mlxsw_sp_port_system_port_mapping_set(struct mlxsw_sp_port *mlxsw_sp_port) return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sspr), sspr_pl); } -static int __mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp, - u8 local_port, u8 *p_module, - u8 *p_width, u8 *p_lane) +static int mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp, + u8 local_port, u8 *p_module, + u8 *p_width, u8 *p_lane) { char pmlp_pl[MLXSW_REG_PMLP_LEN]; int err; @@ -330,16 +330,6 @@ static int __mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp, return 0; } -static int mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp, - u8 local_port, u8 *p_module, - u8 *p_width) -{ - u8 lane; - - return __mlxsw_sp_port_module_info_get(mlxsw_sp, local_port, p_module, - p_width, &lane); -} - static int mlxsw_sp_port_module_map(struct mlxsw_sp *mlxsw_sp, u8 local_port, u8 module, u8 width, u8 lane) { @@ -957,17 +947,11 @@ static int mlxsw_sp_port_get_phys_port_name(struct net_device *dev, char *name, size_t len) { struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev); - u8 module, width, lane; + u8 module = mlxsw_sp_port->mapping.module; + u8 width = mlxsw_sp_port->mapping.width; + u8 lane = mlxsw_sp_port->mapping.lane; int err; - err = __mlxsw_sp_port_module_info_get(mlxsw_sp_port->mlxsw_sp, - mlxsw_sp_port->local_port, - &module, &width, &lane); - if (err) { - netdev_err(dev, "Failed to retrieve module information\n"); - return err; - } - if (!mlxsw_sp_port->split) err = snprintf(name, len, "p%d", module + 1); else @@ -1690,7 +1674,7 @@ static int mlxsw_sp_port_ets_init(struct mlxsw_sp_port *mlxsw_sp_port) } static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port, - bool split, u8 module, u8 width) + bool split, u8 module, u8 width, u8 lane) { struct mlxsw_sp_port *mlxsw_sp_port; struct net_device *dev; @@ -1705,6 +1689,9 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port, mlxsw_sp_port->mlxsw_sp = mlxsw_sp; mlxsw_sp_port->local_port = local_port; mlxsw_sp_port->split = split; + mlxsw_sp_port->mapping.module = module; + mlxsw_sp_port->mapping.width = width; + mlxsw_sp_port->mapping.lane = lane; bytes = DIV_ROUND_UP(VLAN_N_VID, BITS_PER_BYTE); mlxsw_sp_port->active_vlans = kzalloc(bytes, GFP_KERNEL); if (!mlxsw_sp_port->active_vlans) { @@ -1895,8 +1882,8 @@ static void mlxsw_sp_ports_remove(struct mlxsw_sp *mlxsw_sp) static int mlxsw_sp_ports_create(struct mlxsw_sp *mlxsw_sp) { + u8 module, width, lane; size_t alloc_size; - u8 module, width; int i; int err; @@ -1907,13 +1894,14 @@ static int mlxsw_sp_ports_create(struct mlxsw_sp *mlxsw_sp) for (i = 1; i < MLXSW_PORT_MAX_PORTS; i++) { err = mlxsw_sp_port_module_info_get(mlxsw_sp, i, &module, - &width); + &width, &lane); if (err) goto err_port_module_info_get; if (!width) continue; mlxsw_sp->port_to_module[i] = module; - err = mlxsw_sp_port_create(mlxsw_sp, i, false, module, width); + err = mlxsw_sp_port_create(mlxsw_sp, i, false, module, width, + lane); if (err) goto err_port_create; } @@ -1955,7 +1943,7 @@ static int mlxsw_sp_port_split_create(struct mlxsw_sp *mlxsw_sp, u8 base_port, for (i = 0; i < count; i++) { err = mlxsw_sp_port_create(mlxsw_sp, base_port + i, true, - module, width); + module, width, i * width); if (err) goto err_port_create; } @@ -2004,7 +1992,7 @@ static void mlxsw_sp_port_unsplit_create(struct mlxsw_sp *mlxsw_sp, module = mlxsw_sp->port_to_module[local_port]; mlxsw_sp_port_create(mlxsw_sp, local_port, false, module, - width); + width, 0); } } @@ -2024,18 +2012,14 @@ static int mlxsw_sp_port_split(struct mlxsw_core *mlxsw_core, u8 local_port, return -EINVAL; } + module = mlxsw_sp_port->mapping.module; + cur_width = mlxsw_sp_port->mapping.width; + if (count != 2 && count != 4) { netdev_err(mlxsw_sp_port->dev, "Port can only be split into 2 or 4 ports\n"); return -EINVAL; } - err = mlxsw_sp_port_module_info_get(mlxsw_sp, local_port, &module, - &cur_width); - if (err) { - netdev_err(mlxsw_sp_port->dev, "Failed to get port's width\n"); - return err; - } - if (cur_width != MLXSW_PORT_MODULE_MAX_WIDTH) { netdev_err(mlxsw_sp_port->dev, "Port cannot be split further\n"); return -EINVAL; @@ -2077,10 +2061,9 @@ static int mlxsw_sp_port_unsplit(struct mlxsw_core *mlxsw_core, u8 local_port) { struct mlxsw_sp *mlxsw_sp = mlxsw_core_driver_priv(mlxsw_core); struct mlxsw_sp_port *mlxsw_sp_port; - u8 module, cur_width, base_port; + u8 cur_width, base_port; unsigned int count; int i; - int err; mlxsw_sp_port = mlxsw_sp->ports[local_port]; if (!mlxsw_sp_port) { @@ -2094,12 +2077,7 @@ static int mlxsw_sp_port_unsplit(struct mlxsw_core *mlxsw_core, u8 local_port) return -EINVAL; } - err = mlxsw_sp_port_module_info_get(mlxsw_sp, local_port, &module, - &cur_width); - if (err) { - netdev_err(mlxsw_sp_port->dev, "Failed to get port's width\n"); - return err; - } + cur_width = mlxsw_sp_port->mapping.width; count = cur_width == 1 ? 4 : 2; base_port = mlxsw_sp_cluster_base_port_get(local_port); diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h index e2c022d3e2f3..13b30eaa13d4 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h @@ -229,6 +229,11 @@ struct mlxsw_sp_port { struct ieee_maxrate *maxrate; struct ieee_pfc *pfc; } dcb; + struct { + u8 module; + u8 width; + u8 lane; + } mapping; /* 802.1Q bridge VLANs */ unsigned long *active_vlans; unsigned long *untagged_vlans; -- cgit v1.2.3 From 8c237cd0ccb570d13158758af02e11359a4a5b1c Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Thu, 9 Jun 2016 15:50:49 +1000 Subject: drivers/of: Fix depth for sub-tree blob in unflatten_dt_nodes() The function is unflattening device sub-tree blob if @dad passed to the function is valid. Currently, this functionality is used by PPC PowerNV PCI hotplug driver only. There are possibly multiple nodes in the first level of depth, fdt_next_node() bails immediately when @depth becomes negative before the second device node can be probed successfully. It leads to the device nodes except the first one won't be unflattened successfully. This fixes the issue by setting the initial depth (@inital_depth) to 1 when this function is called to unflatten device sub-tree blob. No logic changes when this function is used to unflatten non-sub-tree blob. Cc: Rhyland Klein Fixes: 78c44d910 ("drivers/of: Fix depth when unflattening devicetree") Signed-off-by: Gavin Shan Tested-by: Rhyland Klein Tested-by: Andrew Donnellan Signed-off-by: Rob Herring --- drivers/of/fdt.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 14f2f8c7c260..33daffc4392c 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -395,7 +395,7 @@ static int unflatten_dt_nodes(const void *blob, struct device_node **nodepp) { struct device_node *root; - int offset = 0, depth = 0; + int offset = 0, depth = 0, initial_depth = 0; #define FDT_MAX_DEPTH 64 unsigned int fpsizes[FDT_MAX_DEPTH]; struct device_node *nps[FDT_MAX_DEPTH]; @@ -405,11 +405,22 @@ static int unflatten_dt_nodes(const void *blob, if (nodepp) *nodepp = NULL; + /* + * We're unflattening device sub-tree if @dad is valid. There are + * possibly multiple nodes in the first level of depth. We need + * set @depth to 1 to make fdt_next_node() happy as it bails + * immediately when negative @depth is found. Otherwise, the device + * nodes except the first one won't be unflattened successfully. + */ + if (dad) + depth = initial_depth = 1; + root = dad; fpsizes[depth] = dad ? strlen(of_node_full_name(dad)) : 0; nps[depth] = dad; + for (offset = 0; - offset >= 0 && depth >= 0; + offset >= 0 && depth >= initial_depth; offset = fdt_next_node(blob, offset, &depth)) { if (WARN_ON_ONCE(depth >= FDT_MAX_DEPTH)) continue; -- cgit v1.2.3 From a7ae81952cdab56a1277bd2f9ed7284c0f575120 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 9 Jun 2016 16:56:28 +0300 Subject: i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Many Intel systems the BIOS declares a SystemIO OpRegion below the SMBus PCI device as can be seen in ACPI DSDT table from Lenovo Yoga 900: Device (SBUS) { OperationRegion (SMBI, SystemIO, (SBAR << 0x05), 0x10) Field (SMBI, ByteAcc, NoLock, Preserve) { HSTS, 8, Offset (0x02), HCON, 8, HCOM, 8, TXSA, 8, DAT0, 8, DAT1, 8, HBDR, 8, PECR, 8, RXSA, 8, SDAT, 16 } There are also bunch of AML methods that that the BIOS can use to access these fields. Most of the systems in question AML methods accessing the SMBI OpRegion are never used. Now, because of this SMBI OpRegion many systems fail to load the SMBus driver with an error looking like one below: ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305F conflicts with OpRegion 0x0000000000003040-0x000000000000304F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver The reason is that this SMBI OpRegion conflicts with the PCI BAR used by the SMBus driver. It turns out that we can install a custom SystemIO address space handler for the SMBus device to intercept all accesses through that OpRegion. This allows us to share the PCI BAR with the AML code if it for some reason is using it. We do not expect that this OpRegion handler will ever be called but if it is we print a warning and prevent all access from the SMBus driver itself. Link: https://bugzilla.kernel.org/show_bug.cgi?id=110041 Reported-by: Andy Lutomirski Reported-by: Pali Rohár Suggested-by: Rafael J. Wysocki Signed-off-by: Mika Westerberg Acked-by: Rafael J. Wysocki Reviewed-by: Jean Delvare Reviewed-by: Benjamin Tissoires Tested-by: Pali Rohár Tested-by: Jean Delvare Signed-off-by: Wolfram Sang Cc: stable@vger.kernel.org --- drivers/i2c/busses/i2c-i801.c | 99 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 96 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 64b1208bca5e..4a60ad214747 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -245,6 +245,13 @@ struct i801_priv { struct platform_device *mux_pdev; #endif struct platform_device *tco_pdev; + + /* + * If set to true the host controller registers are reserved for + * ACPI AML use. Protected by acpi_lock. + */ + bool acpi_reserved; + struct mutex acpi_lock; }; #define FEATURE_SMBUS_PEC (1 << 0) @@ -718,6 +725,12 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, int ret = 0, xact = 0; struct i801_priv *priv = i2c_get_adapdata(adap); + mutex_lock(&priv->acpi_lock); + if (priv->acpi_reserved) { + mutex_unlock(&priv->acpi_lock); + return -EBUSY; + } + pm_runtime_get_sync(&priv->pci_dev->dev); hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) @@ -820,6 +833,7 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, out: pm_runtime_mark_last_busy(&priv->pci_dev->dev); pm_runtime_put_autosuspend(&priv->pci_dev->dev); + mutex_unlock(&priv->acpi_lock); return ret; } @@ -1257,6 +1271,83 @@ static void i801_add_tco(struct i801_priv *priv) priv->tco_pdev = pdev; } +#ifdef CONFIG_ACPI +static acpi_status +i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits, + u64 *value, void *handler_context, void *region_context) +{ + struct i801_priv *priv = handler_context; + struct pci_dev *pdev = priv->pci_dev; + acpi_status status; + + /* + * Once BIOS AML code touches the OpRegion we warn and inhibit any + * further access from the driver itself. This device is now owned + * by the system firmware. + */ + mutex_lock(&priv->acpi_lock); + + if (!priv->acpi_reserved) { + priv->acpi_reserved = true; + + dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n"); + dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n"); + + /* + * BIOS is accessing the host controller so prevent it from + * suspending automatically from now on. + */ + pm_runtime_get_sync(&pdev->dev); + } + + if ((function & ACPI_IO_MASK) == ACPI_READ) + status = acpi_os_read_port(address, (u32 *)value, bits); + else + status = acpi_os_write_port(address, (u32)*value, bits); + + mutex_unlock(&priv->acpi_lock); + + return status; +} + +static int i801_acpi_probe(struct i801_priv *priv) +{ + struct acpi_device *adev; + acpi_status status; + + adev = ACPI_COMPANION(&priv->pci_dev->dev); + if (adev) { + status = acpi_install_address_space_handler(adev->handle, + ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler, + NULL, priv); + if (ACPI_SUCCESS(status)) + return 0; + } + + return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]); +} + +static void i801_acpi_remove(struct i801_priv *priv) +{ + struct acpi_device *adev; + + adev = ACPI_COMPANION(&priv->pci_dev->dev); + if (!adev) + return; + + acpi_remove_address_space_handler(adev->handle, + ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler); + + mutex_lock(&priv->acpi_lock); + if (priv->acpi_reserved) + pm_runtime_put(&priv->pci_dev->dev); + mutex_unlock(&priv->acpi_lock); +} +#else +static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; } +static inline void i801_acpi_remove(struct i801_priv *priv) { } +#endif + static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) { unsigned char temp; @@ -1274,6 +1365,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) priv->adapter.dev.parent = &dev->dev; ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev)); priv->adapter.retries = 3; + mutex_init(&priv->acpi_lock); priv->pci_dev = dev; switch (dev->device) { @@ -1336,10 +1428,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) return -ENODEV; } - err = acpi_check_resource_conflict(&dev->resource[SMBBAR]); - if (err) { + if (i801_acpi_probe(priv)) return -ENODEV; - } err = pcim_iomap_regions(dev, 1 << SMBBAR, dev_driver_string(&dev->dev)); @@ -1348,6 +1438,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) "Failed to request SMBus region 0x%lx-0x%Lx\n", priv->smba, (unsigned long long)pci_resource_end(dev, SMBBAR)); + i801_acpi_remove(priv); return err; } @@ -1412,6 +1503,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) err = i2c_add_adapter(&priv->adapter); if (err) { dev_err(&dev->dev, "Failed to add SMBus adapter\n"); + i801_acpi_remove(priv); return err; } @@ -1438,6 +1530,7 @@ static void i801_remove(struct pci_dev *dev) i801_del_mux(priv); i2c_del_adapter(&priv->adapter); + i801_acpi_remove(priv); pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); platform_device_unregister(priv->tco_pdev); -- cgit v1.2.3 From 908cf12bbca0f18a23085a5a35301509e034f0a9 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Wed, 8 Jun 2016 08:51:17 +0200 Subject: i2c: octeon: Missing AAK flag in case of I2C_M_RECV_LEN During receive the controller requires the AAK flag for all bytes but the final one. This was wrong in case of I2C_M_RECV_LEN, where the decision if the final byte is to be transmitted happened before adding the additional received length byte. Set the AAK flag if additional bytes are to be received. Signed-off-by: Jan Glauber Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-octeon.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c index aa5f01efd826..1922e4a16e92 100644 --- a/drivers/i2c/busses/i2c-octeon.c +++ b/drivers/i2c/busses/i2c-octeon.c @@ -934,8 +934,15 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, return result; for (i = 0; i < length; i++) { - /* for the last byte TWSI_CTL_AAK must not be set */ - if (i + 1 == length) + /* + * For the last byte to receive TWSI_CTL_AAK must not be set. + * + * A special case is I2C_M_RECV_LEN where we don't know the + * additional length yet. If recv_len is set we assume we're + * not reading the final byte and therefore need to set + * TWSI_CTL_AAK. + */ + if ((i + 1 == length) && !(recv_len && i == 0)) final_read = true; /* clear iflg to allow next event */ -- cgit v1.2.3 From 8913f8d2930368f30998e60851259606eeed2c49 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Wed, 8 Jun 2016 08:51:19 +0200 Subject: i2c: octeon: Avoid printk after too long SMBUS message Remove the warning about a too long SMBUS message because the ipmi_ssif driver triggers this warning too frequently so it spams the message log. Signed-off-by: Jan Glauber Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-octeon.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c index 1922e4a16e92..30ae35146723 100644 --- a/drivers/i2c/busses/i2c-octeon.c +++ b/drivers/i2c/busses/i2c-octeon.c @@ -957,12 +957,8 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, data[i] = octeon_i2c_data_read(i2c); if (recv_len && i == 0) { - if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) { - dev_err(i2c->dev, - "%s: read len > I2C_SMBUS_BLOCK_MAX %d\n", - __func__, data[i]); + if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) return -EPROTO; - } length += data[i]; } -- cgit v1.2.3 From edb50a5403d2e2d2b2b63a8365c4378c9c300ed6 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Tue, 10 May 2016 15:14:28 +0200 Subject: NVMe: Only release requested regions The NVMe driver only requests the PCIe device's memory regions but releases all possible regions (including eventual I/O regions). This leads to a stale warning entry in dmesg about freeing non existent resources. Signed-off-by: Johannes Thumshirn Signed-off-by: Jens Axboe --- drivers/nvme/host/pci.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 78dca3193ca4..befac5b19490 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1679,9 +1679,14 @@ static int nvme_pci_enable(struct nvme_dev *dev) static void nvme_dev_unmap(struct nvme_dev *dev) { + struct pci_dev *pdev = to_pci_dev(dev->dev); + int bars; + if (dev->bar) iounmap(dev->bar); - pci_release_regions(to_pci_dev(dev->dev)); + + bars = pci_select_bars(pdev, IORESOURCE_MEM); + pci_release_selected_regions(pdev, bars); } static void nvme_pci_disable(struct nvme_dev *dev) @@ -1924,7 +1929,7 @@ static int nvme_dev_map(struct nvme_dev *dev) return 0; release: - pci_release_regions(pdev); + pci_release_selected_regions(pdev, bars); return -ENODEV; } -- cgit v1.2.3 From 9f05e6219023116b59f6495e8c4d4ba352dd5fea Mon Sep 17 00:00:00 2001 From: Lukasz Gemborowski Date: Mon, 6 Jun 2016 15:51:50 +0200 Subject: i2c: mux: reg: Provide of_match_table of_match_table was not filled which prevents device to be instantiated from device tree node. Signed-off-by: Lukasz Gemborowski Reviewed-by: Alexander Sverdlin Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-reg.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c index 6773cadf7c9f..26e7c5187a58 100644 --- a/drivers/i2c/muxes/i2c-mux-reg.c +++ b/drivers/i2c/muxes/i2c-mux-reg.c @@ -260,6 +260,7 @@ static struct platform_driver i2c_mux_reg_driver = { .remove = i2c_mux_reg_remove, .driver = { .name = "i2c-mux-reg", + .of_match_table = of_match_ptr(i2c_mux_reg_of_match), }, }; -- cgit v1.2.3 From a9cc4006155a68dd0940728f4f222dd035180904 Mon Sep 17 00:00:00 2001 From: Doug Oucharek Date: Thu, 9 Jun 2016 18:45:45 -0400 Subject: staging: lustre: lnet: Don't access NULL NI on failure path In kiblnd_passive_connect(), if we are failing the connection attempt because we cannot find a valid NI (we have a NULL NI), we were coring after the "goto fail" because the failure path was assuming non-NULL NI. This patch ensures we don't dereference a NULL NI on that failure path. Signed-off-by: Doug Oucharek Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8022 Reviewed-on: http://review.whamcloud.com/19614 Reviewed-by: Dmitry Eremin Reviewed-by: James Simmons Reviewed-by: Matt Ezell Reviewed-by: Oleg Drokin Signed-off-by: Greg Kroah-Hartman --- drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c b/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c index bbfee53cfcf5..845e49a52430 100644 --- a/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c +++ b/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c @@ -2521,12 +2521,13 @@ kiblnd_passive_connect(struct rdma_cm_id *cmid, void *priv, int priv_nob) return 0; failed: - if (ni) + if (ni) { lnet_ni_decref(ni); + rej.ibr_cp.ibcp_queue_depth = kiblnd_msg_queue_size(version, ni); + rej.ibr_cp.ibcp_max_frags = kiblnd_rdma_frags(version, ni); + } rej.ibr_version = version; - rej.ibr_cp.ibcp_queue_depth = kiblnd_msg_queue_size(version, ni); - rej.ibr_cp.ibcp_max_frags = kiblnd_rdma_frags(version, ni); kiblnd_reject(cmid, &rej); return -ECONNREFUSED; -- cgit v1.2.3 From 29ccf7590ec49647b3442b6b2c64c4406a931c80 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 10 Jun 2016 11:40:49 +1000 Subject: drm/amdgpu: fix warning with powerplay disabled. This just fixes a warning when you disable powerplay. Signed-off-by: Dave Airlie --- drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c index 10b1be51318b..82256558e0f5 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c @@ -218,9 +218,9 @@ static int amdgpu_pp_hw_fini(void *handle) static void amdgpu_pp_late_fini(void *handle) { +#ifdef CONFIG_DRM_AMD_POWERPLAY struct amdgpu_device *adev = (struct amdgpu_device *)handle; -#ifdef CONFIG_DRM_AMD_POWERPLAY if (adev->pp_enabled) { amdgpu_pm_sysfs_fini(adev); amd_powerplay_fini(adev->powerplay.pp_handle); -- cgit v1.2.3 From 9cd3411c42c5d5ba55d6e745edfe7df53c1ffa41 Mon Sep 17 00:00:00 2001 From: Majd Dibbiny Date: Fri, 10 Jun 2016 00:07:29 +0300 Subject: net/mlx5: Fix masking of reserved bits in XRCD number Mask the reserved bits when reading the number of newly created XRCD. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Majd Dibbiny Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/qp.c b/drivers/net/ethernet/mellanox/mlx5/core/qp.c index b720a274220d..b82d65802d96 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/qp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/qp.c @@ -418,7 +418,7 @@ int mlx5_core_xrcd_alloc(struct mlx5_core_dev *dev, u32 *xrcdn) if (out.hdr.status) err = mlx5_cmd_status_to_err(&out.hdr); else - *xrcdn = be32_to_cpu(out.xrcdn); + *xrcdn = be32_to_cpu(out.xrcdn) & 0xffffff; return err; } -- cgit v1.2.3 From 2fee37a47cebc26d58eec5dafc8ba787a6ee5350 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Fri, 10 Jun 2016 00:07:31 +0300 Subject: net/mlx5: Fix root flow table update When we destroy the last flow table we need to update the root_ft to NULL. It fixes an issue for when the last flow table is destroyed and recreated again, root_ft pointer will not be updated, as a result traffic will be dropped. Fixes: 2cc43b494a6c ('net/mlx5_core: Managing root flow table') Signed-off-by: Maor Gottlieb Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 8b5f0b2c0d5c..fa6fec1930f5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1292,8 +1292,8 @@ static int update_root_ft_destroy(struct mlx5_flow_table *ft) ft->id); return err; } - root->root_ft = new_root_ft; } + root->root_ft = new_root_ft; return 0; } -- cgit v1.2.3 From 876d634d19e41603aab91455f2c52a78a28372d5 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Fri, 10 Jun 2016 00:07:32 +0300 Subject: net/mlx5: Fix flow steering NIC capabilities check Flow steering infrastructure is currently used only on link layer ethernet, therefore the driver should initialize the flow steering when the device link layer is ethernet. In addition, add missing capability check before initializing the namespace of NIC RX flow tables. Fixes: 2530236303d9 ('net/mlx5_core: Flow steering tree initialization') Signed-off-by: Maor Gottlieb Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 10 +++++++++- include/linux/mlx5/device.h | 6 ++++++ 2 files changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index fa6fec1930f5..c1efa5517d17 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1767,6 +1767,9 @@ static void cleanup_root_ns(struct mlx5_core_dev *dev) void mlx5_cleanup_fs(struct mlx5_core_dev *dev) { + if (MLX5_CAP_GEN(dev, port_type) != MLX5_CAP_PORT_TYPE_ETH) + return; + cleanup_root_ns(dev); cleanup_single_prio_root_ns(dev, dev->priv.fdb_root_ns); cleanup_single_prio_root_ns(dev, dev->priv.esw_egress_root_ns); @@ -1828,15 +1831,20 @@ int mlx5_init_fs(struct mlx5_core_dev *dev) { int err = 0; + if (MLX5_CAP_GEN(dev, port_type) != MLX5_CAP_PORT_TYPE_ETH) + return 0; + err = mlx5_init_fc_stats(dev); if (err) return err; - if (MLX5_CAP_GEN(dev, nic_flow_table)) { + if (MLX5_CAP_GEN(dev, nic_flow_table) && + MLX5_CAP_FLOWTABLE_NIC_RX(dev, ft_support)) { err = init_root_ns(dev); if (err) goto err; } + if (MLX5_CAP_GEN(dev, eswitch_flow_table)) { err = init_fdb_root_ns(dev); if (err) diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h index 51f0caf299d8..73a48479892d 100644 --- a/include/linux/mlx5/device.h +++ b/include/linux/mlx5/device.h @@ -1367,6 +1367,12 @@ enum mlx5_cap_type { #define MLX5_CAP_FLOWTABLE_MAX(mdev, cap) \ MLX5_GET(flow_table_nic_cap, mdev->hca_caps_max[MLX5_CAP_FLOW_TABLE], cap) +#define MLX5_CAP_FLOWTABLE_NIC_RX(mdev, cap) \ + MLX5_CAP_FLOWTABLE(mdev, flow_table_properties_nic_receive.cap) + +#define MLX5_CAP_FLOWTABLE_NIC_RX_MAX(mdev, cap) \ + MLX5_CAP_FLOWTABLE_MAX(mdev, flow_table_properties_nic_receive.cap) + #define MLX5_CAP_ESW_FLOWTABLE(mdev, cap) \ MLX5_GET(flow_table_eswitch_cap, \ mdev->hca_caps_cur[MLX5_CAP_ESWITCH_FLOW_TABLE], cap) -- cgit v1.2.3 From bd02ef8eec0b98abe6d5efe280c87903b2eb9874 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Fri, 10 Jun 2016 00:07:33 +0300 Subject: net/mlx5: Fix E-Switch flow steering capabilities check Add missing capabilities check for E-Switch FDB and ACLs flow tables before creating their namespace in flow steering. Fixes: efdc810ba39d ('net/mlx5: Flow steering, Add vport ACL support') Signed-off-by: Maor Gottlieb Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 28 ++++++++++++----------- 1 file changed, 15 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index c1efa5517d17..e912a3d2505e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1846,19 +1846,21 @@ int mlx5_init_fs(struct mlx5_core_dev *dev) } if (MLX5_CAP_GEN(dev, eswitch_flow_table)) { - err = init_fdb_root_ns(dev); - if (err) - goto err; - } - if (MLX5_CAP_ESW_EGRESS_ACL(dev, ft_support)) { - err = init_egress_acl_root_ns(dev); - if (err) - goto err; - } - if (MLX5_CAP_ESW_INGRESS_ACL(dev, ft_support)) { - err = init_ingress_acl_root_ns(dev); - if (err) - goto err; + if (MLX5_CAP_ESW_FLOWTABLE_FDB(dev, ft_support)) { + err = init_fdb_root_ns(dev); + if (err) + goto err; + } + if (MLX5_CAP_ESW_EGRESS_ACL(dev, ft_support)) { + err = init_egress_acl_root_ns(dev); + if (err) + goto err; + } + if (MLX5_CAP_ESW_INGRESS_ACL(dev, ft_support)) { + err = init_ingress_acl_root_ns(dev); + if (err) + goto err; + } } return 0; -- cgit v1.2.3 From 3fe3d819d5015d56d0d7289ae16db5e612640c5b Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Fri, 10 Jun 2016 00:07:34 +0300 Subject: net/mlx5: E-Switch, Use the correct free() function We must use kvfree() for something that could have been allocated with vzalloc(), do that. Fixes: 5742df0f7dbe ('net/mlx5: E-Switch, Introduce VST vport ingress/egress ACLs') Fixes: 86d722ad2c3b ('net/mlx5: Use flow steering infrastructure for mlx5_en') Signed-off-by: Or Gerlitz Reported-by: Ilya Lesokhin Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index b84a6918a700..537479641c8e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -529,7 +529,7 @@ out: } } - kfree(flow_group_in); + kvfree(flow_group_in); return err; } @@ -1097,7 +1097,7 @@ static void esw_vport_enable_egress_acl(struct mlx5_eswitch *esw, vport->egress.drop_grp = drop_grp; vport->egress.allowed_vlans_grp = vlan_grp; out: - kfree(flow_group_in); + kvfree(flow_group_in); if (err && !IS_ERR_OR_NULL(vlan_grp)) mlx5_destroy_flow_group(vlan_grp); if (err && !IS_ERR_OR_NULL(acl)) @@ -1259,7 +1259,7 @@ out: mlx5_destroy_flow_table(vport->ingress.acl); } - kfree(flow_group_in); + kvfree(flow_group_in); } static void esw_vport_cleanup_ingress_rules(struct mlx5_eswitch *esw, -- cgit v1.2.3 From 3f42ac6648723e906c1c10edc0c523aff29963cc Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Fri, 10 Jun 2016 00:07:35 +0300 Subject: net/mlx5: E-Switch, Use the correct error check on returned pointers The mlx5 flow-steering API (mlx5_create_flow_table/group/rule) never returns null pointer on error. Even if it was doing that, checking for IS_ERR_OR_NULL(p) and then returning PTR_ERR(p) would have cause bugs, since PTR_ERR(NULL) --> success, crash. To make things more robust and protect against related future bugs, convert all IS_ERR_OR_NULL checks on returned values to IS_ERR. Fixes: 5742df0f7dbe ('net/mlx5: E-Switch, Introduce VST vport ingress/egress ACLs') Fixes: 86d722ad2c3b ('net/mlx5: Use flow steering infrastructure for mlx5_en') Signed-off-by: Or Gerlitz Reported-by: Ilya Lesokhin Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 34 +++++++++++------------ 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index 537479641c8e..a350af221d15 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -383,7 +383,7 @@ __esw_fdb_set_vport_rule(struct mlx5_eswitch *esw, u32 vport, bool rx_rule, match_v, MLX5_FLOW_CONTEXT_ACTION_FWD_DEST, 0, &dest); - if (IS_ERR_OR_NULL(flow_rule)) { + if (IS_ERR(flow_rule)) { pr_warn( "FDB: Failed to add flow rule: dmac_v(%pM) dmac_c(%pM) -> vport(%d), err(%ld)\n", dmac_v, dmac_c, vport, PTR_ERR(flow_rule)); @@ -457,7 +457,7 @@ static int esw_create_fdb_table(struct mlx5_eswitch *esw, int nvports) table_size = BIT(MLX5_CAP_ESW_FLOWTABLE_FDB(dev, log_max_ft_size)); fdb = mlx5_create_flow_table(root_ns, 0, table_size, 0); - if (IS_ERR_OR_NULL(fdb)) { + if (IS_ERR(fdb)) { err = PTR_ERR(fdb); esw_warn(dev, "Failed to create FDB Table err %d\n", err); goto out; @@ -474,7 +474,7 @@ static int esw_create_fdb_table(struct mlx5_eswitch *esw, int nvports) MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, table_size - 3); eth_broadcast_addr(dmac); g = mlx5_create_flow_group(fdb, flow_group_in); - if (IS_ERR_OR_NULL(g)) { + if (IS_ERR(g)) { err = PTR_ERR(g); esw_warn(dev, "Failed to create flow group err(%d)\n", err); goto out; @@ -489,7 +489,7 @@ static int esw_create_fdb_table(struct mlx5_eswitch *esw, int nvports) eth_zero_addr(dmac); dmac[0] = 0x01; g = mlx5_create_flow_group(fdb, flow_group_in); - if (IS_ERR_OR_NULL(g)) { + if (IS_ERR(g)) { err = PTR_ERR(g); esw_warn(dev, "Failed to create allmulti flow group err(%d)\n", err); goto out; @@ -506,7 +506,7 @@ static int esw_create_fdb_table(struct mlx5_eswitch *esw, int nvports) MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, table_size - 1); MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, table_size - 1); g = mlx5_create_flow_group(fdb, flow_group_in); - if (IS_ERR_OR_NULL(g)) { + if (IS_ERR(g)) { err = PTR_ERR(g); esw_warn(dev, "Failed to create promisc flow group err(%d)\n", err); goto out; @@ -1060,7 +1060,7 @@ static void esw_vport_enable_egress_acl(struct mlx5_eswitch *esw, return; acl = mlx5_create_vport_flow_table(root_ns, 0, table_size, 0, vport->vport); - if (IS_ERR_OR_NULL(acl)) { + if (IS_ERR(acl)) { err = PTR_ERR(acl); esw_warn(dev, "Failed to create E-Switch vport[%d] egress flow Table, err(%d)\n", vport->vport, err); @@ -1075,7 +1075,7 @@ static void esw_vport_enable_egress_acl(struct mlx5_eswitch *esw, MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, 0); vlan_grp = mlx5_create_flow_group(acl, flow_group_in); - if (IS_ERR_OR_NULL(vlan_grp)) { + if (IS_ERR(vlan_grp)) { err = PTR_ERR(vlan_grp); esw_warn(dev, "Failed to create E-Switch vport[%d] egress allowed vlans flow group, err(%d)\n", vport->vport, err); @@ -1086,7 +1086,7 @@ static void esw_vport_enable_egress_acl(struct mlx5_eswitch *esw, MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, 1); MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, 1); drop_grp = mlx5_create_flow_group(acl, flow_group_in); - if (IS_ERR_OR_NULL(drop_grp)) { + if (IS_ERR(drop_grp)) { err = PTR_ERR(drop_grp); esw_warn(dev, "Failed to create E-Switch vport[%d] egress drop flow group, err(%d)\n", vport->vport, err); @@ -1174,7 +1174,7 @@ static void esw_vport_enable_ingress_acl(struct mlx5_eswitch *esw, return; acl = mlx5_create_vport_flow_table(root_ns, 0, table_size, 0, vport->vport); - if (IS_ERR_OR_NULL(acl)) { + if (IS_ERR(acl)) { err = PTR_ERR(acl); esw_warn(dev, "Failed to create E-Switch vport[%d] ingress flow Table, err(%d)\n", vport->vport, err); @@ -1192,7 +1192,7 @@ static void esw_vport_enable_ingress_acl(struct mlx5_eswitch *esw, MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, 0); g = mlx5_create_flow_group(acl, flow_group_in); - if (IS_ERR_OR_NULL(g)) { + if (IS_ERR(g)) { err = PTR_ERR(g); esw_warn(dev, "Failed to create E-Switch vport[%d] ingress untagged spoofchk flow group, err(%d)\n", vport->vport, err); @@ -1207,7 +1207,7 @@ static void esw_vport_enable_ingress_acl(struct mlx5_eswitch *esw, MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, 1); g = mlx5_create_flow_group(acl, flow_group_in); - if (IS_ERR_OR_NULL(g)) { + if (IS_ERR(g)) { err = PTR_ERR(g); esw_warn(dev, "Failed to create E-Switch vport[%d] ingress untagged flow group, err(%d)\n", vport->vport, err); @@ -1223,7 +1223,7 @@ static void esw_vport_enable_ingress_acl(struct mlx5_eswitch *esw, MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, 2); g = mlx5_create_flow_group(acl, flow_group_in); - if (IS_ERR_OR_NULL(g)) { + if (IS_ERR(g)) { err = PTR_ERR(g); esw_warn(dev, "Failed to create E-Switch vport[%d] ingress spoofchk flow group, err(%d)\n", vport->vport, err); @@ -1236,7 +1236,7 @@ static void esw_vport_enable_ingress_acl(struct mlx5_eswitch *esw, MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, 3); g = mlx5_create_flow_group(acl, flow_group_in); - if (IS_ERR_OR_NULL(g)) { + if (IS_ERR(g)) { err = PTR_ERR(g); esw_warn(dev, "Failed to create E-Switch vport[%d] ingress drop flow group, err(%d)\n", vport->vport, err); @@ -1363,7 +1363,7 @@ static int esw_vport_ingress_config(struct mlx5_eswitch *esw, match_v, MLX5_FLOW_CONTEXT_ACTION_ALLOW, 0, NULL); - if (IS_ERR_OR_NULL(vport->ingress.allow_rule)) { + if (IS_ERR(vport->ingress.allow_rule)) { err = PTR_ERR(vport->ingress.allow_rule); pr_warn("vport[%d] configure ingress allow rule, err(%d)\n", vport->vport, err); @@ -1380,7 +1380,7 @@ static int esw_vport_ingress_config(struct mlx5_eswitch *esw, match_v, MLX5_FLOW_CONTEXT_ACTION_DROP, 0, NULL); - if (IS_ERR_OR_NULL(vport->ingress.drop_rule)) { + if (IS_ERR(vport->ingress.drop_rule)) { err = PTR_ERR(vport->ingress.drop_rule); pr_warn("vport[%d] configure ingress drop rule, err(%d)\n", vport->vport, err); @@ -1439,7 +1439,7 @@ static int esw_vport_egress_config(struct mlx5_eswitch *esw, match_v, MLX5_FLOW_CONTEXT_ACTION_ALLOW, 0, NULL); - if (IS_ERR_OR_NULL(vport->egress.allowed_vlan)) { + if (IS_ERR(vport->egress.allowed_vlan)) { err = PTR_ERR(vport->egress.allowed_vlan); pr_warn("vport[%d] configure egress allowed vlan rule failed, err(%d)\n", vport->vport, err); @@ -1457,7 +1457,7 @@ static int esw_vport_egress_config(struct mlx5_eswitch *esw, match_v, MLX5_FLOW_CONTEXT_ACTION_DROP, 0, NULL); - if (IS_ERR_OR_NULL(vport->egress.drop_rule)) { + if (IS_ERR(vport->egress.drop_rule)) { err = PTR_ERR(vport->egress.drop_rule); pr_warn("vport[%d] configure egress drop rule failed, err(%d)\n", vport->vport, err); -- cgit v1.2.3 From 25fff58cb24c8880090d8b8ef7746001a135e876 Mon Sep 17 00:00:00 2001 From: Mohamad Haj Yahia Date: Fri, 10 Jun 2016 00:07:36 +0300 Subject: net/mlx5: E-Switch, Fix vport enable flow Reorder vport enable flow to mark the vport as enabled before calling the vport change handler which was modified to handle the case for when vport is not enabled. This fixes the case for when the PF netdev is open before sriov is enabled, once sriov is enabled at esw_enable_vport, esw_vport_change_handle_locked didn't read the PF context since it thought the PF vport was not enabled. When we enable the vport, arming for events is not required anymore, since it's done on the vport change handle Fixes: 586cfa7f1d58 ('net/mlx5: E-Switch, Use vport event handler for vport cleanup') Signed-off-by: Mohamad Haj Yahia Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index a350af221d15..cfec20cffd26 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1491,14 +1491,11 @@ static void esw_enable_vport(struct mlx5_eswitch *esw, int vport_num, /* Sync with current vport context */ vport->enabled_events = enable_events; - esw_vport_change_handle_locked(vport); - vport->enabled = true; /* only PF is trusted by default */ vport->trusted = (vport_num) ? false : true; - - arm_vport_context_events_cmd(esw->dev, vport_num, enable_events); + esw_vport_change_handle_locked(vport); esw->enabled_vports++; esw_debug(esw->dev, "Enabled VPORT(%d)\n", vport_num); -- cgit v1.2.3 From 23898c763f4af6f5c80b0230b1ea788a0ce3cf73 Mon Sep 17 00:00:00 2001 From: Noa Osherovich Date: Fri, 10 Jun 2016 00:07:37 +0300 Subject: net/mlx5: E-Switch, Modify node guid on vf set MAC In RoCE, the RDMA-CM needs the node guid to establish connection between nodes. Today, the node guid exposed to mlx5 Ethernet VFs is zero, therefore RDMA-CM on the VF is broken. Whenever the administrator sets a MAC for a VF, derive the node guid from it and set it as well in the following way: MAC: e4:1d:2d:b3:f4:01 -> node_guid: e4:1d:2d:ff:fe:b3:f4:01 Fixes: 77256579c6b43 ('net/mlx5: E-Switch, Introduce Vport...') Signed-off-by: Noa Osherovich Signed-off-by: Majd Dibbiny Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 23 ++++++++++++-- drivers/net/ethernet/mellanox/mlx5/core/vport.c | 38 +++++++++++++++++++++++ include/linux/mlx5/mlx5_ifc.h | 9 ++++-- include/linux/mlx5/vport.h | 2 ++ 4 files changed, 68 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index cfec20cffd26..9b1855b199a1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1725,11 +1725,24 @@ void mlx5_eswitch_vport_event(struct mlx5_eswitch *esw, struct mlx5_eqe *eqe) (esw && MLX5_CAP_GEN(esw->dev, vport_group_manager) && mlx5_core_is_pf(esw->dev)) #define LEGAL_VPORT(esw, vport) (vport >= 0 && vport < esw->total_vports) +static void node_guid_gen_from_mac(u64 *node_guid, u8 mac[ETH_ALEN]) +{ + ((u8 *)node_guid)[7] = mac[0]; + ((u8 *)node_guid)[6] = mac[1]; + ((u8 *)node_guid)[5] = mac[2]; + ((u8 *)node_guid)[4] = 0xff; + ((u8 *)node_guid)[3] = 0xfe; + ((u8 *)node_guid)[2] = mac[3]; + ((u8 *)node_guid)[1] = mac[4]; + ((u8 *)node_guid)[0] = mac[5]; +} + int mlx5_eswitch_set_vport_mac(struct mlx5_eswitch *esw, int vport, u8 mac[ETH_ALEN]) { - int err = 0; struct mlx5_vport *evport; + u64 node_guid; + int err = 0; if (!ESW_ALLOWED(esw)) return -EPERM; @@ -1753,11 +1766,17 @@ int mlx5_eswitch_set_vport_mac(struct mlx5_eswitch *esw, return err; } + node_guid_gen_from_mac(&node_guid, mac); + err = mlx5_modify_nic_vport_node_guid(esw->dev, vport, node_guid); + if (err) + mlx5_core_warn(esw->dev, + "Failed to set vport %d node guid, err = %d. RDMA_CM will not function properly for this VF.\n", + vport, err); + mutex_lock(&esw->state_lock); if (evport->enabled) err = esw_vport_ingress_config(esw, evport); mutex_unlock(&esw->state_lock); - return err; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vport.c b/drivers/net/ethernet/mellanox/mlx5/core/vport.c index b69dadcfb897..daf44cd4c566 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vport.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vport.c @@ -508,6 +508,44 @@ int mlx5_query_nic_vport_node_guid(struct mlx5_core_dev *mdev, u64 *node_guid) } EXPORT_SYMBOL_GPL(mlx5_query_nic_vport_node_guid); +int mlx5_modify_nic_vport_node_guid(struct mlx5_core_dev *mdev, + u32 vport, u64 node_guid) +{ + int inlen = MLX5_ST_SZ_BYTES(modify_nic_vport_context_in); + void *nic_vport_context; + u8 *guid; + void *in; + int err; + + if (!vport) + return -EINVAL; + if (!MLX5_CAP_GEN(mdev, vport_group_manager)) + return -EACCES; + if (!MLX5_CAP_ESW(mdev, nic_vport_node_guid_modify)) + return -ENOTSUPP; + + in = mlx5_vzalloc(inlen); + if (!in) + return -ENOMEM; + + MLX5_SET(modify_nic_vport_context_in, in, + field_select.node_guid, 1); + MLX5_SET(modify_nic_vport_context_in, in, vport_number, vport); + MLX5_SET(modify_nic_vport_context_in, in, other_vport, !!vport); + + nic_vport_context = MLX5_ADDR_OF(modify_nic_vport_context_in, + in, nic_vport_context); + guid = MLX5_ADDR_OF(nic_vport_context, nic_vport_context, + node_guid); + MLX5_SET64(nic_vport_context, nic_vport_context, node_guid, node_guid); + + err = mlx5_modify_nic_vport_context(mdev, in, inlen); + + kvfree(in); + + return err; +} + int mlx5_query_nic_vport_qkey_viol_cntr(struct mlx5_core_dev *mdev, u16 *qkey_viol_cntr) { diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 986a615f623c..e955a2859009 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -501,7 +501,9 @@ struct mlx5_ifc_e_switch_cap_bits { u8 vport_svlan_insert[0x1]; u8 vport_cvlan_insert_if_not_exist[0x1]; u8 vport_cvlan_insert_overwrite[0x1]; - u8 reserved_at_5[0x1b]; + u8 reserved_at_5[0x19]; + u8 nic_vport_node_guid_modify[0x1]; + u8 nic_vport_port_guid_modify[0x1]; u8 reserved_at_20[0x7e0]; }; @@ -4584,7 +4586,10 @@ struct mlx5_ifc_modify_nic_vport_context_out_bits { }; struct mlx5_ifc_modify_nic_vport_field_select_bits { - u8 reserved_at_0[0x19]; + u8 reserved_at_0[0x16]; + u8 node_guid[0x1]; + u8 port_guid[0x1]; + u8 reserved_at_18[0x1]; u8 mtu[0x1]; u8 change_event[0x1]; u8 promisc[0x1]; diff --git a/include/linux/mlx5/vport.h b/include/linux/mlx5/vport.h index 301da4a5e6bf..6c16c198f680 100644 --- a/include/linux/mlx5/vport.h +++ b/include/linux/mlx5/vport.h @@ -50,6 +50,8 @@ int mlx5_modify_nic_vport_mtu(struct mlx5_core_dev *mdev, u16 mtu); int mlx5_query_nic_vport_system_image_guid(struct mlx5_core_dev *mdev, u64 *system_image_guid); int mlx5_query_nic_vport_node_guid(struct mlx5_core_dev *mdev, u64 *node_guid); +int mlx5_modify_nic_vport_node_guid(struct mlx5_core_dev *mdev, + u32 vport, u64 node_guid); int mlx5_query_nic_vport_qkey_viol_cntr(struct mlx5_core_dev *mdev, u16 *qkey_viol_cntr); int mlx5_query_hca_vport_gid(struct mlx5_core_dev *dev, u8 other_vport, -- cgit v1.2.3 From 62e3c24ac4f0ee307c41a3652636f88a3f8d165c Mon Sep 17 00:00:00 2001 From: Mohamad Haj Yahia Date: Fri, 10 Jun 2016 00:07:38 +0300 Subject: net/mlx5: E-Switch, always set mc_promisc for allmulti vports Set the mc_promisc flag also in the case of adding new mc address to existing allmulti vport. Fixes: a35f71f27a61 ('net/mlx5: E-Switch, Implement promiscuous rx modes vf request handling') Signed-off-by: Mohamad Haj Yahia Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index 9b1855b199a1..aebbd6ccb9fe 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -651,6 +651,7 @@ static void update_allmulti_vports(struct mlx5_eswitch *esw, esw_fdb_set_vport_rule(esw, mac, vport_idx); + iter_vaddr->mc_promisc = true; break; case MLX5_ACTION_DEL: if (!iter_vaddr) -- cgit v1.2.3 From 811afeaa3797bdf4eabed286100811b33005c9e0 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Fri, 10 Jun 2016 00:07:39 +0300 Subject: net/mlx5e: Use ndo_stop explicitly at shutdown flow The current implementation copies the flow of ndo_stop instead of calling it explicitly, Fixed it. Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback") Signed-off-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index fd4392999eee..f5c8d5db25a8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3192,10 +3192,7 @@ static void mlx5e_destroy_netdev(struct mlx5_core_dev *mdev, void *vpriv) flush_workqueue(priv->wq); if (test_bit(MLX5_INTERFACE_STATE_SHUTDOWN, &mdev->intf_state)) { netif_device_detach(netdev); - mutex_lock(&priv->state_lock); - if (test_bit(MLX5E_STATE_OPENED, &priv->state)) - mlx5e_close_locked(netdev); - mutex_unlock(&priv->state_lock); + mlx5e_close(netdev); } else { unregister_netdev(netdev); } -- cgit v1.2.3 From 0ca00fc1f808602137dc6d51f17747b3bb0fc34d Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Fri, 10 Jun 2016 00:07:40 +0300 Subject: net/mlx5e: Fix blue flame quota logic Blue flame is a latency enhancement feature that allows the driver to write the packet data directly to the NIC's registers thus making the read of the packet data from host memory redundant. We maintain a quota for the blue flame which is reloaded whenever we identify that the hardware is processing send requests and processes them fast enough so by the time we post the next send request it was able to process all the pending ones. This indicates that the hardware is capable of processing more blue flame requests efficiently. The blue flame quota is decremented whenever we send using blue flame. The current code erroneously clears the budget if we did not use blue flame for the current post send operation and we fix it here. Fixes: 88a85f99e51f ('net/mlx5e: TX latency optimization to save DMA reads') Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index 229ab16fb8d3..b000ddc29553 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -317,7 +317,8 @@ static netdev_tx_t mlx5e_sq_xmit(struct mlx5e_sq *sq, struct sk_buff *skb) while ((sq->pc & wq->sz_m1) > sq->edge) mlx5e_send_nop(sq, false); - sq->bf_budget = bf ? sq->bf_budget - 1 : 0; + if (bf) + sq->bf_budget--; sq->stats.packets++; sq->stats.bytes += num_bytes; -- cgit v1.2.3 From 143aaef8aae2b53a5ab2d0e9d48c4ff368e82b16 Mon Sep 17 00:00:00 2001 From: Ander Conselvan de Oliveira Date: Fri, 20 May 2016 15:47:06 +0300 Subject: drm/i915: Fix NULL pointer deference when out of PLLs in IVB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In commit f9476a6c6d0c ("drm/i915: Refactor platform specifics out of intel_get_shared_dpll()"), the ibx_get_dpll() function lacked an error check, that can lead to a NULL pointer dereference when trying to enable three pipes. BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 IP: [] intel_reference_shared_dpll+0x15/0x100 [i915] PGD cec87067 PUD d30ce067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: snd_hda_intel i915 drm_kms_helper drm intel_gtt sch_fq_codel cfg80211 binfmt_misc i2c_algo_bit cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea intel_rapl iosf_mbi x86_pkg_temp_thermal coretemp agpgart kvm_intel snd_hda_codec_hdmi kvm iTCO_wdt snd_hda_codec_realtek snd_hda_codec_generic irqbypass aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd psmouse pcspkr snd_hda_codec i2c_i801 snd_hwdep snd_hda_core snd_pcm snd_timer lpc_ich mfd_core snd soundcore wmi evdev tpm_tis tpm [last unloaded: drm] CPU: 3 PID: 5810 Comm: kms_flip Tainted: G U W 4.6.0-test+ #3 Hardware name: /DZ77BH-55K, BIOS BHZ7710H.86A.0100.2013.0517.0942 05/17/2013 task: ffff8800d3908040 ti: ffff8801166c8000 task.ti: ffff8801166c8000 RIP: 0010:[] [] intel_reference_shared_dpll+0x15/0x100 [i915] RSP: 0018:ffff8801166cba60 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002 RDX: 0000000000000001 RSI: ffff8800d07f1bf8 RDI: 0000000000000000 RBP: ffff8801166cba88 R08: 0000000000000002 R09: ffff8800d32e5698 R10: 0000000000000001 R11: ffff8800cc89ac88 R12: ffff8800d07f1bf8 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f4c3fc8d8c0(0000) GS:ffff88011bcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000068 CR3: 00000000d3b4c000 CR4: 00000000001406e0 Stack: 0000000000000000 ffff8800d07f1bf8 0000000000000000 ffff8800d04c0000 0000000000000000 ffff8801166cbaa8 ffffffffa04823a7 ffff8800d07f1bf8 ffff8800d32e5698 ffff8801166cbab8 ffffffffa04840cf ffff8801166cbaf0 Call Trace: [] ibx_get_dpll+0x47/0xa0 [i915] [] intel_get_shared_dpll+0x1f/0x50 [i915] [] ironlake_crtc_compute_clock+0x280/0x430 [i915] [] intel_crtc_atomic_check+0x240/0x320 [i915] [] drm_atomic_helper_check_planes+0x14e/0x1d0 [drm_kms_helper] [] intel_atomic_check+0x5dc/0x1110 [i915] [] drm_atomic_check_only+0x14a/0x660 [drm] [] ? drm_atomic_set_crtc_for_connector+0x96/0x100 [drm] [] drm_atomic_commit+0x17/0x60 [drm] [] restore_fbdev_mode+0x237/0x260 [drm_kms_helper] [] ? drm_modeset_lock_all_ctx+0x9a/0xb0 [drm] [] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper] [] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper] [] drm_fb_helper_hotplug_event+0xaa/0xf0 [drm_kms_helper] [] drm_fb_helper_restore_fbdev_mode_unlocked+0x56/0x80 [drm_kms_helper] [] intel_fbdev_restore_mode+0x22/0x80 [i915] [] i915_driver_lastclose+0xe/0x20 [i915] [] drm_lastclose+0x2e/0x130 [drm] [] drm_release+0x2ac/0x4b0 [drm] [] __fput+0xed/0x1f0 [] ____fput+0xe/0x10 [] task_work_run+0x76/0xb0 [] do_exit+0x3ab/0xc60 [] ? trace_hardirqs_on_caller+0x12f/0x1c0 [] do_group_exit+0x4e/0xc0 [] SyS_exit_group+0x14/0x20 [] entry_SYSCALL_64_fastpath+0x18/0xa8 Code: 14 80 48 8d 34 90 b8 01 00 00 00 d3 e0 09 04 b3 5b 41 5c 5d c3 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 49 89 fe 41 55 41 54 53 <44> 8b 67 68 48 89 f3 48 8b be 08 02 00 00 4c 8b 2e e8 15 9d fd RIP [] intel_reference_shared_dpll+0x15/0x100 [i915] RSP CR2: 0000000000000068 Cc: Ville Syrjälä Cc: drm-intel-fixes@lists.freedesktop.org Reported-by: Ville Syrjälä Fixes: f9476a6c6d0c ("drm/i915: Refactor platform specifics out of intel_get_shared_dpll()") Signed-off-by: Ander Conselvan de Oliveira Reviewed-by: Ville Syrjälä Tested-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1463748426-5956-1-git-send-email-ander.conselvan.de.oliveira@intel.com (cherry picked from commit bb143165510661feda06fd99298b8b3a94af3046) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dpll_mgr.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c index 3ac705936b04..baf6f5584cbd 100644 --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c @@ -366,6 +366,9 @@ ibx_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, DPLL_ID_PCH_PLL_B); } + if (!pll) + return NULL; + /* reference the pll */ intel_reference_shared_dpll(pll, crtc_state); -- cgit v1.2.3 From ca8bdaf13abbdcbb12ff12164aa2d5b522ec524d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 8 Jun 2016 19:21:17 +0100 Subject: stmmac: fix parameter to dwmac4_set_umac_addr() The dwmac4_set_umac_addr() takes a struct mac_device_info as the first parameter, but is being passed a ioaddr instead from dwmac4_set_filter(). Fix the warning/bug by changing the first parameter. drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: expected struct mac_device_info *hw drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: got void [noderef] *ioaddr Note, only compile tested this as do not have any hardware with it in. Signed-off-by: Ben Dooks Acked-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index 4f7283d05588..44da877d2483 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -156,7 +156,7 @@ static void dwmac4_set_filter(struct mac_device_info *hw, struct netdev_hw_addr *ha; netdev_for_each_uc_addr(ha, dev) { - dwmac4_set_umac_addr(ioaddr, ha->addr, reg); + dwmac4_set_umac_addr(hw, ha->addr, reg); reg++; } } -- cgit v1.2.3 From 50219538ffc0493a2b451a3aa0191138ef8bfe9d Mon Sep 17 00:00:00 2001 From: Shrikrishna Khare Date: Wed, 8 Jun 2016 07:40:53 -0700 Subject: vmxnet3: segCnt can be 1 for LRO packets The device emulation may send segCnt of 1 for LRO packets. Signed-off-by: Shrikrishna Khare Signed-off-by: Jin Heo Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 2 +- drivers/net/vmxnet3/vmxnet3_int.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index db8022ae415b..08885bc8d6db 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -1369,7 +1369,7 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, rcdlro = (struct Vmxnet3_RxCompDescExt *)rcd; segCnt = rcdlro->segCnt; - BUG_ON(segCnt <= 1); + WARN_ON_ONCE(segCnt == 0); mss = rcdlro->mss; if (unlikely(segCnt <= 1)) segCnt = 0; diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index c4825392d64b..3d2b64e63408 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -69,10 +69,10 @@ /* * Version numbers */ -#define VMXNET3_DRIVER_VERSION_STRING "1.4.7.0-k" +#define VMXNET3_DRIVER_VERSION_STRING "1.4.8.0-k" /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ -#define VMXNET3_DRIVER_VERSION_NUM 0x01040700 +#define VMXNET3_DRIVER_VERSION_NUM 0x01040800 #if defined(CONFIG_PCI_MSI) /* RSS only makes sense if MSI-X is supported. */ -- cgit v1.2.3 From 36a5fc5c439c7a95cb9b64414fad4067da6ae3ce Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 1 Jun 2016 18:08:43 +0100 Subject: drm/i915: Silence "unexpected child device config size" for VBT on 845g MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit My old 845g complains that the child_device_size inside its VBT, version 110, is incorrect. Let's fiddle with the version matching such that it works with this VBT (i.e. treat BIOS v110 as having the same size as v108). Fixes [drm:intel_bios_init] *ERROR* Unexpected child device config size 27 (expected 33 for VBT version 110) Whether this is correct, no one knows - but it works for this particular machine. Signed-off-by: Chris Wilson Acked-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1464800923-6054-1-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit fa05178c5dc3d1a3ad370f101cad01cf9dd3bbf9) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_bios.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index b235b6e88ead..051b0db07efb 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -1187,7 +1187,7 @@ parse_device_mapping(struct drm_i915_private *dev_priv, } if (bdb->version < 106) { expected_size = 22; - } else if (bdb->version < 109) { + } else if (bdb->version < 111) { expected_size = 27; } else if (bdb->version < 195) { BUILD_BUG_ON(sizeof(struct old_child_dev_config) != 33); -- cgit v1.2.3 From fff7660d1e4f47dc6372ce2bd31a7b8cba0da340 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 1 Jun 2016 08:27:50 +0100 Subject: drm/i915: Only ignore eDP ports that are connected MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the VBT says that a certain port should be eDP (and hence fused off from HDMI), but in reality it isn't, we need to try and acquire the HDMI connection instead. So only trust the VBT edp setting if we can connect to an eDP device on that port. Fixes: d2182a6608 (drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV) References: https://bugs.freedesktop.org/show_bug.cgi?id=96288 Signed-off-by: Chris Wilson Tested-by: Phidias Chiang Cc: Ville Syrjälä Cc: Jani Nikula Cc: Daniel Vetter Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1464766070-31623-1-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 457c52d87e5dac9a4cf1a6a287e60ea7645067d4) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 20 ++++++++++---------- drivers/gpu/drm/i915/intel_dp.c | 13 ++++++------- drivers/gpu/drm/i915/intel_drv.h | 2 +- 3 files changed, 17 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2113f401f0ba..996e0c37293c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -14554,6 +14554,8 @@ static void intel_setup_outputs(struct drm_device *dev) if (I915_READ(PCH_DP_D) & DP_DETECTED) intel_dp_init(dev, PCH_DP_D, PORT_D); } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { + bool has_edp; + /* * The DP_DETECTED bit is the latched state of the DDC * SDA pin at boot. However since eDP doesn't require DDC @@ -14563,19 +14565,17 @@ static void intel_setup_outputs(struct drm_device *dev) * eDP ports. Consult the VBT as well as DP_DETECTED to * detect eDP ports. */ - if (I915_READ(VLV_HDMIB) & SDVO_DETECTED && - !intel_dp_is_edp(dev, PORT_B)) + has_edp = intel_dp_is_edp(dev, PORT_B); + if (I915_READ(VLV_DP_B) & DP_DETECTED || has_edp) + has_edp &= intel_dp_init(dev, VLV_DP_B, PORT_B); + if (I915_READ(VLV_HDMIB) & SDVO_DETECTED && !has_edp) intel_hdmi_init(dev, VLV_HDMIB, PORT_B); - if (I915_READ(VLV_DP_B) & DP_DETECTED || - intel_dp_is_edp(dev, PORT_B)) - intel_dp_init(dev, VLV_DP_B, PORT_B); - if (I915_READ(VLV_HDMIC) & SDVO_DETECTED && - !intel_dp_is_edp(dev, PORT_C)) + has_edp = intel_dp_is_edp(dev, PORT_C); + if (I915_READ(VLV_DP_C) & DP_DETECTED || has_edp) + has_edp &= intel_dp_init(dev, VLV_DP_C, PORT_C); + if (I915_READ(VLV_HDMIC) & SDVO_DETECTED && !has_edp) intel_hdmi_init(dev, VLV_HDMIC, PORT_C); - if (I915_READ(VLV_DP_C) & DP_DETECTED || - intel_dp_is_edp(dev, PORT_C)) - intel_dp_init(dev, VLV_DP_C, PORT_C); if (IS_CHERRYVIEW(dev)) { /* eDP not supported on port D, so don't check VBT */ diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index f192f58708c2..2991326842f5 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -5923,9 +5923,9 @@ fail: return false; } -void -intel_dp_init(struct drm_device *dev, - i915_reg_t output_reg, enum port port) +bool intel_dp_init(struct drm_device *dev, + i915_reg_t output_reg, + enum port port) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_digital_port *intel_dig_port; @@ -5935,7 +5935,7 @@ intel_dp_init(struct drm_device *dev, intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL); if (!intel_dig_port) - return; + return false; intel_connector = intel_connector_alloc(); if (!intel_connector) @@ -5992,7 +5992,7 @@ intel_dp_init(struct drm_device *dev, if (!intel_dp_init_connector(intel_dig_port, intel_connector)) goto err_init_connector; - return; + return true; err_init_connector: drm_encoder_cleanup(encoder); @@ -6000,8 +6000,7 @@ err_encoder_init: kfree(intel_connector); err_connector_alloc: kfree(intel_dig_port); - - return; + return false; } void intel_dp_mst_suspend(struct drm_device *dev) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index a28b4aac1e02..4a24b0067a3a 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -1284,7 +1284,7 @@ void intel_csr_ucode_suspend(struct drm_i915_private *); void intel_csr_ucode_resume(struct drm_i915_private *); /* intel_dp.c */ -void intel_dp_init(struct drm_device *dev, i915_reg_t output_reg, enum port port); +bool intel_dp_init(struct drm_device *dev, i915_reg_t output_reg, enum port port); bool intel_dp_init_connector(struct intel_digital_port *intel_dig_port, struct intel_connector *intel_connector); void intel_dp_set_link_params(struct intel_dp *intel_dp, -- cgit v1.2.3 From a5aac5ab876ad95b7f5e8d862afb07248ee9cae2 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Fri, 3 Jun 2016 12:17:43 +0300 Subject: drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Apparently some CHV boards failed to hook up the port presence straps for HDMI ports as well (earlier we assumed this problem only affected eDP ports). So let's check the VBT in addition to the strap, and if either one claims that the port is present go ahead and register the relevant connector. While at it, change port D to register DP before HDMI as we do for ports B and C since commit 457c52d87e5d ("drm/i915: Only ignore eDP ports that are connected") Also print a debug message when we register a HDMI connector to aid in diagnosing missing/incorrect ports. We already had such a print for DP/eDP. v2: Improve the comment in the code a bit, note the port D change in the commit message Cc: Radoslav Duda Tested-by: Radoslav Duda Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96321 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1464945463-14364-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson (cherry picked from commit 22f35042593c2b369861f0b9740efb8065a42db0) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 39 ++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_display.c | 30 ++++++++++++++++++--------- drivers/gpu/drm/i915/intel_hdmi.c | 3 +++ 4 files changed, 64 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 5faacc6e548d..7c334e902266 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3481,6 +3481,7 @@ int intel_bios_init(struct drm_i915_private *dev_priv); bool intel_bios_is_valid_vbt(const void *buf, size_t size); bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv); bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin); +bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port port); bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port); bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port); bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv, enum port *port); diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 051b0db07efb..519818596e2a 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -1545,6 +1545,45 @@ bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin) return false; } +/** + * intel_bios_is_port_present - is the specified digital port present + * @dev_priv: i915 device instance + * @port: port to check + * + * Return true if the device in %port is present. + */ +bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port port) +{ + static const struct { + u16 dp, hdmi; + } port_mapping[] = { + [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, }, + [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, }, + [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, }, + [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, }, + }; + int i; + + /* FIXME maybe deal with port A as well? */ + if (WARN_ON(port == PORT_A) || port >= ARRAY_SIZE(port_mapping)) + return false; + + if (!dev_priv->vbt.child_dev_num) + return false; + + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { + const union child_device_config *p_child = + &dev_priv->vbt.child_dev[i]; + if ((p_child->common.dvo_port == port_mapping[port].dp || + p_child->common.dvo_port == port_mapping[port].hdmi) && + (p_child->common.device_type & (DEVICE_TYPE_TMDS_DVI_SIGNALING | + DEVICE_TYPE_DISPLAYPORT_OUTPUT))) + return true; + } + + return false; +} + /** * intel_bios_is_port_edp - is the device in given port eDP * @dev_priv: i915 device instance diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 996e0c37293c..718f56525b96 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -14554,7 +14554,7 @@ static void intel_setup_outputs(struct drm_device *dev) if (I915_READ(PCH_DP_D) & DP_DETECTED) intel_dp_init(dev, PCH_DP_D, PORT_D); } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { - bool has_edp; + bool has_edp, has_port; /* * The DP_DETECTED bit is the latched state of the DDC @@ -14564,25 +14564,37 @@ static void intel_setup_outputs(struct drm_device *dev) * Thus we can't rely on the DP_DETECTED bit alone to detect * eDP ports. Consult the VBT as well as DP_DETECTED to * detect eDP ports. + * + * Sadly the straps seem to be missing sometimes even for HDMI + * ports (eg. on Voyo V3 - CHT x7-Z8700), so check both strap + * and VBT for the presence of the port. Additionally we can't + * trust the port type the VBT declares as we've seen at least + * HDMI ports that the VBT claim are DP or eDP. */ has_edp = intel_dp_is_edp(dev, PORT_B); - if (I915_READ(VLV_DP_B) & DP_DETECTED || has_edp) + has_port = intel_bios_is_port_present(dev_priv, PORT_B); + if (I915_READ(VLV_DP_B) & DP_DETECTED || has_port) has_edp &= intel_dp_init(dev, VLV_DP_B, PORT_B); - if (I915_READ(VLV_HDMIB) & SDVO_DETECTED && !has_edp) + if ((I915_READ(VLV_HDMIB) & SDVO_DETECTED || has_port) && !has_edp) intel_hdmi_init(dev, VLV_HDMIB, PORT_B); has_edp = intel_dp_is_edp(dev, PORT_C); - if (I915_READ(VLV_DP_C) & DP_DETECTED || has_edp) + has_port = intel_bios_is_port_present(dev_priv, PORT_C); + if (I915_READ(VLV_DP_C) & DP_DETECTED || has_port) has_edp &= intel_dp_init(dev, VLV_DP_C, PORT_C); - if (I915_READ(VLV_HDMIC) & SDVO_DETECTED && !has_edp) + if ((I915_READ(VLV_HDMIC) & SDVO_DETECTED || has_port) && !has_edp) intel_hdmi_init(dev, VLV_HDMIC, PORT_C); if (IS_CHERRYVIEW(dev)) { - /* eDP not supported on port D, so don't check VBT */ - if (I915_READ(CHV_HDMID) & SDVO_DETECTED) - intel_hdmi_init(dev, CHV_HDMID, PORT_D); - if (I915_READ(CHV_DP_D) & DP_DETECTED) + /* + * eDP not supported on port D, + * so no need to worry about it + */ + has_port = intel_bios_is_port_present(dev_priv, PORT_D); + if (I915_READ(CHV_DP_D) & DP_DETECTED || has_port) intel_dp_init(dev, CHV_DP_D, PORT_D); + if (I915_READ(CHV_HDMID) & SDVO_DETECTED || has_port) + intel_hdmi_init(dev, CHV_HDMID, PORT_D); } intel_dsi_init(dev); diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 2c3bd9c2573e..a8844702d11b 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -2142,6 +2142,9 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, enum port port = intel_dig_port->port; uint8_t alternate_ddc_pin; + DRM_DEBUG_KMS("Adding HDMI connector on port %c\n", + port_name(port)); + if (WARN(intel_dig_port->max_lanes < 4, "Not enough lanes (%d) for HDMI on port %c\n", intel_dig_port->max_lanes, port_name(port))) -- cgit v1.2.3 From 356d27bbfe332de0f2f78e55636e581960c9774e Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 31 May 2016 12:08:34 +0300 Subject: drm/i915: Extract physical display dimensions from VBT MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VBT has these mysterious H/V image sizes as part of the display timings. Looking at some dumps those appear to be the physical dimensions in mm. Which makes sense since the timing descriptor matches the format used by EDID detailed timing descriptor, which defines these as "H/V Addressable Video Image Size in mm". So let's use that information from the panel fixed mode to get the physical dimensions for LVDS/eDP/DSI displays. And with that we can fill out the display_info so that userspace can get at it via GetConnector. v2: Use (hi<<8)|lo instead of broken (hi<<4)+lo Handle LVDS and eDP too Cc: Stephen Just Tested-by: Stephen Just Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96255 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1464685714-30507-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola (cherry picked from commit df457245b5b7515cf97763ebd8975229e34d4cf3) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_bios.c | 5 +++++ drivers/gpu/drm/i915/intel_dp.c | 5 ++++- drivers/gpu/drm/i915/intel_dsi.c | 3 +++ drivers/gpu/drm/i915/intel_lvds.c | 2 ++ drivers/gpu/drm/i915/intel_vbt_defs.h | 7 ++++--- 5 files changed, 18 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 519818596e2a..b9022fa053d6 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -139,6 +139,11 @@ fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode, else panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC; + panel_fixed_mode->width_mm = (dvo_timing->himage_hi << 8) | + dvo_timing->himage_lo; + panel_fixed_mode->height_mm = (dvo_timing->vimage_hi << 8) | + dvo_timing->vimage_lo; + /* Some VBTs have bogus h/vtotal values */ if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2991326842f5..ffe5f8430957 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -5725,8 +5725,11 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, if (!fixed_mode && dev_priv->vbt.lfp_lvds_vbt_mode) { fixed_mode = drm_mode_duplicate(dev, dev_priv->vbt.lfp_lvds_vbt_mode); - if (fixed_mode) + if (fixed_mode) { fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; + connector->display_info.width_mm = fixed_mode->width_mm; + connector->display_info.height_mm = fixed_mode->height_mm; + } } mutex_unlock(&dev->mode_config.mutex); diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 366ad6c67ce4..4756ef639648 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -1545,6 +1545,9 @@ void intel_dsi_init(struct drm_device *dev) goto err; } + connector->display_info.width_mm = fixed_mode->width_mm; + connector->display_info.height_mm = fixed_mode->height_mm; + intel_panel_init(&intel_connector->panel, fixed_mode, NULL); intel_dsi_add_properties(intel_connector); diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index bc53c0dd34d0..96281e628d2a 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -1082,6 +1082,8 @@ void intel_lvds_init(struct drm_device *dev) fixed_mode = drm_mode_duplicate(dev, dev_priv->vbt.lfp_lvds_vbt_mode); if (fixed_mode) { fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; + connector->display_info.width_mm = fixed_mode->width_mm; + connector->display_info.height_mm = fixed_mode->height_mm; goto out; } } diff --git a/drivers/gpu/drm/i915/intel_vbt_defs.h b/drivers/gpu/drm/i915/intel_vbt_defs.h index c15051de8023..44fb0b35eed3 100644 --- a/drivers/gpu/drm/i915/intel_vbt_defs.h +++ b/drivers/gpu/drm/i915/intel_vbt_defs.h @@ -403,9 +403,10 @@ struct lvds_dvo_timing { u8 vsync_off:4; u8 rsvd0:6; u8 hsync_off_hi:2; - u8 h_image; - u8 v_image; - u8 max_hv; + u8 himage_lo; + u8 vimage_lo; + u8 vimage_hi:4; + u8 himage_hi:4; u8 h_border; u8 v_border; u8 rsvd1:3; -- cgit v1.2.3 From 06a84db74c3572cde79eb1b04f301399eafb8226 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Mon, 2 May 2016 15:27:34 +0300 Subject: iwlwifi: mvm: increase scan timeout to 20 seconds The 16 seconds timeout we were using turned out to be too short. Recalculations by system show that the total time in both bands should be < 18.5 seconds, even in the slowest cases (e.g. DCM P2P with DTIM=2). Rounding it up to 20 seconds for a bit more safety. Fixes: 728e825f81b1 ("iwlwifi: mvm: add a scan timeout for regular scans") Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c index 6f609dd5c222..e78fc567ff7d 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c @@ -1222,7 +1222,7 @@ static int iwl_mvm_check_running_scans(struct iwl_mvm *mvm, int type) return -EIO; } -#define SCAN_TIMEOUT (16 * HZ) +#define SCAN_TIMEOUT (20 * HZ) void iwl_mvm_scan_timeout(unsigned long data) { -- cgit v1.2.3 From 7d6a1ab6a2db180122dee8db6c201f2dcf677813 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 15 May 2016 10:20:29 +0300 Subject: iwlwifi: mvm: fix RCU splat in TKIP's update_key The commit below mistakenly changed an rcu_dereference_check to a rcu_dereference_protected which introduced the following RCU warning: [ INFO: suspicious RCU usage. ] 4.6.0-rc7-next-20160513-dbg-00004-g8de8b92-dirty #655 Not tainted ------------------------------- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:1069 suspicious rcu_dereference_protected() usage! Call Trace: [] lockdep_rcu_suspicious+0xf7/0x100 [] iwl_mvm_get_key_sta.part.0+0x5d/0x80 [iwlmvm] [] iwl_mvm_update_tkip_key+0xd3/0x162 [iwlmvm] [] iwl_mvm_mac_update_tkip_key+0x17/0x19 [iwlmvm] [] ieee80211_tkip_decrypt_data+0x22c/0x24b [mac80211] [] ieee80211_crypto_tkip_decrypt+0xc5/0x110 [mac80211] [] ieee80211_rx_handlers+0x9bb/0x1fe1 [mac80211] Fixes: 13303c0fb148 ("iwlwifi: mvm: use helpers to get iwl_mvm_sta") Reported-by: Sergey Senozhatsky Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index fea4d3437e2f..0454bfe0ef6c 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1852,12 +1852,18 @@ static struct iwl_mvm_sta *iwl_mvm_get_key_sta(struct iwl_mvm *mvm, mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) { u8 sta_id = mvmvif->ap_sta_id; + sta = rcu_dereference_check(mvm->fw_id_to_mac_id[sta_id], + lockdep_is_held(&mvm->mutex)); + /* * It is possible that the 'sta' parameter is NULL, * for example when a GTK is removed - the sta_id will then * be the AP ID, and no station was passed by mac80211. */ - return iwl_mvm_sta_from_staid_protected(mvm, sta_id); + if (IS_ERR_OR_NULL(sta)) + return NULL; + + return iwl_mvm_sta_from_mac80211(sta); } return NULL; -- cgit v1.2.3 From 1f9788f335d7c3145bcb59bd570c5b9ef7203ef4 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Mon, 16 May 2016 14:34:20 +0300 Subject: iwlwifi: mvm: fix potential NULL-dereference in iwl_mvm_reorder() We try to access sta before we check for IS_ERR_OR_NULL(), so we may end up accessing a NULL pointer. To prevent that, move the conversion from sta to mvm_sta below the check. Fixes: b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue") Reported-by: Dan Carpenter Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index ac2c5718e454..2c61516d06ff 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -581,7 +581,7 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, struct iwl_rx_mpdu_desc *desc) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct iwl_mvm_sta *mvm_sta = iwl_mvm_sta_from_mac80211(sta); + struct iwl_mvm_sta *mvm_sta; struct iwl_mvm_baid_data *baid_data; struct iwl_mvm_reorder_buffer *buffer; struct sk_buff *tail; @@ -604,6 +604,8 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, if (WARN_ON(IS_ERR_OR_NULL(sta))) return false; + mvm_sta = iwl_mvm_sta_from_mac80211(sta); + /* not a data packet */ if (!ieee80211_is_data_qos(hdr->frame_control) || is_multicast_ether_addr(hdr->addr1)) -- cgit v1.2.3 From aa950524d501afa28869b7f56e539fd9e744dd9f Mon Sep 17 00:00:00 2001 From: Ayala Beker Date: Wed, 1 Jun 2016 00:28:09 +0300 Subject: iwlwifi: mvm: set the encryption type of an IGTK key The FW expect the driver to set the encryption algorithm type when installing the IGTK key in the HW. Currently when installing CMAC IGTK key we don't set the algorithm type and as a result the FW fails to calculate the MIC of multicast management frames. Fix it. Signed-off-by: Ayala Beker Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 0454bfe0ef6c..b23ab4a4504f 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1961,6 +1961,14 @@ static int iwl_mvm_send_sta_igtk(struct iwl_mvm *mvm, struct ieee80211_key_seq seq; const u8 *pn; + switch (keyconf->cipher) { + case WLAN_CIPHER_SUITE_AES_CMAC: + igtk_cmd.ctrl_flags |= cpu_to_le32(STA_KEY_FLG_CCM); + break; + default: + return -EINVAL; + } + memcpy(igtk_cmd.IGTK, keyconf->key, keyconf->keylen); ieee80211_get_key_rx_seq(keyconf, 0, &seq); pn = seq.aes_cmac.pn; -- cgit v1.2.3 From 280a3efa82fccc9532c968a77e5162cb9f0af497 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 7 Jun 2016 14:46:37 +0200 Subject: iwlwifi: mvm: fix a few firmware capability checks My cleanup in "iwlwifi: prepare for higher API/CAPA bits" accidentally inverted a few tests - fix them. Fixes: 859d914c8f5c ("iwlwifi: prepare for higher API/CAPA bits") Reported-by: Sara Sharon Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index e5f267b21316..18a8474b5760 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -3851,8 +3851,8 @@ static int iwl_mvm_mac_get_survey(struct ieee80211_hw *hw, int idx, if (idx != 0) return -ENOENT; - if (fw_has_capa(&mvm->fw->ucode_capa, - IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) + if (!fw_has_capa(&mvm->fw->ucode_capa, + IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) return -ENOENT; mutex_lock(&mvm->mutex); @@ -3898,8 +3898,8 @@ static void iwl_mvm_mac_sta_statistics(struct ieee80211_hw *hw, struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); - if (fw_has_capa(&mvm->fw->ucode_capa, - IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) + if (!fw_has_capa(&mvm->fw->ucode_capa, + IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) return; /* if beacon filtering isn't on mac80211 does it anyway */ -- cgit v1.2.3 From ef2bf4997f7da6efa8540d9cf726c44bf2b863af Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 27 May 2016 09:45:49 -0700 Subject: pwm: Improve args checking in pwm_apply_state() It seems like in the process of refactoring pwm_config() to utilize the newly-introduced pwm_apply_state() API, some args/bounds checking was dropped. In particular, I noted that we are now allowing invalid period selections, e.g.: # echo 1 > /sys/class/pwm/pwmchip0/export # cat /sys/class/pwm/pwmchip0/pwm1/period 100 # echo 101 > /sys/class/pwm/pwmchip0/pwm1/duty_cycle [... driver may or may not reject the value, or trigger some logic bug ...] It's better to see: # echo 1 > /sys/class/pwm/pwmchip0/export # cat /sys/class/pwm/pwmchip0/pwm1/period 100 # echo 101 > /sys/class/pwm/pwmchip0/pwm1/duty_cycle -bash: echo: write error: Invalid argument This patch reintroduces some bounds checks in both pwm_config() (for its signed parameters; we don't want to convert negative values into large unsigned values) and in pwm_apply_state() (which fix the above described behavior, as well as other potential API misuses). Fixes: 5ec803edcb70 ("pwm: Add core infrastructure to allow atomic updates") Signed-off-by: Brian Norris Acked-by: Boris Brezillon Signed-off-by: Thierry Reding --- drivers/pwm/core.c | 3 ++- include/linux/pwm.h | 3 +++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index dba3843c53b8..ed337a8c34ab 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -457,7 +457,8 @@ int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state) { int err; - if (!pwm) + if (!pwm || !state || !state->period || + state->duty_cycle > state->period) return -EINVAL; if (!memcmp(state, &pwm->state, sizeof(*state))) diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 17018f3c066e..908b67c847cd 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -235,6 +235,9 @@ static inline int pwm_config(struct pwm_device *pwm, int duty_ns, if (!pwm) return -EINVAL; + if (duty_ns < 0 || period_ns < 0) + return -EINVAL; + pwm_get_state(pwm, &state); if (state.duty_cycle == duty_ns && state.period == period_ns) return 0; -- cgit v1.2.3 From fe5aa34d6eb9c4d34071845f70f3714b41c8a77d Mon Sep 17 00:00:00 2001 From: Ryo Kodama Date: Wed, 8 Jun 2016 10:58:23 +0900 Subject: pwm: sysfs: Get return value from pwm_apply_state() This patch adds to check the return value from pwm_apply_state() used in enable_store(). The error of enable_store() doesn't work if the return value doesn't received. Signed-off-by: Ryo Kodama Signed-off-by: Yoshihiro Shimoda Fixes: 39100ceea79f ("pwm: Switch to the atomic API") Signed-off-by: Thierry Reding --- drivers/pwm/sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pwm/sysfs.c b/drivers/pwm/sysfs.c index d98599249a05..01695d48dd54 100644 --- a/drivers/pwm/sysfs.c +++ b/drivers/pwm/sysfs.c @@ -152,7 +152,7 @@ static ssize_t enable_store(struct device *child, goto unlock; } - pwm_apply_state(pwm, &state); + ret = pwm_apply_state(pwm, &state); unlock: mutex_unlock(&export->lock); -- cgit v1.2.3 From a44323e2a8f342848bb77e8e04fcd85fcb91b3b4 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 24 May 2016 15:13:02 -0700 Subject: uvc: Forward compat ioctls to their handlers directly The current code goes through a lot of indirection just to call a known handler. Simplify it: just call the handlers directly. Cc: stable@vger.kernel.org Signed-off-by: Andy Lutomirski --- drivers/media/usb/uvc/uvc_v4l2.c | 39 ++++++++++++++++++--------------------- 1 file changed, 18 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index d7723ce772b3..12690c1ea8f8 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -1408,47 +1408,44 @@ static int uvc_v4l2_put_xu_query(const struct uvc_xu_control_query *kp, static long uvc_v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) { + struct uvc_fh *handle = file->private_data; union { struct uvc_xu_control_mapping xmap; struct uvc_xu_control_query xqry; } karg; void __user *up = compat_ptr(arg); - mm_segment_t old_fs; long ret; switch (cmd) { case UVCIOC_CTRL_MAP32: - cmd = UVCIOC_CTRL_MAP; ret = uvc_v4l2_get_xu_mapping(&karg.xmap, up); + if (ret) + return ret; + ret = uvc_ioctl_ctrl_map(handle->chain, &karg.xmap); + if (ret) + return ret; + ret = uvc_v4l2_put_xu_mapping(&karg.xmap, up); + if (ret) + return ret; + break; case UVCIOC_CTRL_QUERY32: - cmd = UVCIOC_CTRL_QUERY; ret = uvc_v4l2_get_xu_query(&karg.xqry, up); + if (ret) + return ret; + ret = uvc_xu_ctrl_query(handle->chain, &karg.xqry); + if (ret) + return ret; + ret = uvc_v4l2_put_xu_query(&karg.xqry, up); + if (ret) + return ret; break; default: return -ENOIOCTLCMD; } - old_fs = get_fs(); - set_fs(KERNEL_DS); - ret = video_ioctl2(file, cmd, (unsigned long)&karg); - set_fs(old_fs); - - if (ret < 0) - return ret; - - switch (cmd) { - case UVCIOC_CTRL_MAP: - ret = uvc_v4l2_put_xu_mapping(&karg.xmap, up); - break; - - case UVCIOC_CTRL_QUERY: - ret = uvc_v4l2_put_xu_query(&karg.xqry, up); - break; - } - return ret; } #endif -- cgit v1.2.3 From f89dec72e98b34b3be66bb1ef1be62974c0f8483 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Wed, 11 May 2016 17:41:27 -0700 Subject: uvc_v4l2: Simplify compat ioctl implementation The uvc compat ioctl implementation seems to have copied user data for no good reason. Remove a bunch of copies. Signed-off-by: Andy Lutomirski --- drivers/media/usb/uvc/uvc_v4l2.c | 58 ++-------------------------------------- 1 file changed, 2 insertions(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index 12690c1ea8f8..c04bc6afb965 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -1274,8 +1274,6 @@ struct uvc_xu_control_mapping32 { static int uvc_v4l2_get_xu_mapping(struct uvc_xu_control_mapping *kp, const struct uvc_xu_control_mapping32 __user *up) { - struct uvc_menu_info __user *umenus; - struct uvc_menu_info __user *kmenus; compat_caddr_t p; if (!access_ok(VERIFY_READ, up, sizeof(*up)) || @@ -1292,17 +1290,7 @@ static int uvc_v4l2_get_xu_mapping(struct uvc_xu_control_mapping *kp, if (__get_user(p, &up->menu_info)) return -EFAULT; - umenus = compat_ptr(p); - if (!access_ok(VERIFY_READ, umenus, kp->menu_count * sizeof(*umenus))) - return -EFAULT; - - kmenus = compat_alloc_user_space(kp->menu_count * sizeof(*kmenus)); - if (kmenus == NULL) - return -EFAULT; - kp->menu_info = kmenus; - - if (copy_in_user(kmenus, umenus, kp->menu_count * sizeof(*umenus))) - return -EFAULT; + kp->menu_info = compat_ptr(p); return 0; } @@ -1310,10 +1298,6 @@ static int uvc_v4l2_get_xu_mapping(struct uvc_xu_control_mapping *kp, static int uvc_v4l2_put_xu_mapping(const struct uvc_xu_control_mapping *kp, struct uvc_xu_control_mapping32 __user *up) { - struct uvc_menu_info __user *umenus; - struct uvc_menu_info __user *kmenus = kp->menu_info; - compat_caddr_t p; - if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || __copy_to_user(up, kp, offsetof(typeof(*up), menu_info)) || __put_user(kp->menu_count, &up->menu_count)) @@ -1322,16 +1306,6 @@ static int uvc_v4l2_put_xu_mapping(const struct uvc_xu_control_mapping *kp, if (__clear_user(up->reserved, sizeof(up->reserved))) return -EFAULT; - if (kp->menu_count == 0) - return 0; - - if (get_user(p, &up->menu_info)) - return -EFAULT; - umenus = compat_ptr(p); - - if (copy_in_user(umenus, kmenus, kp->menu_count * sizeof(*umenus))) - return -EFAULT; - return 0; } @@ -1346,8 +1320,6 @@ struct uvc_xu_control_query32 { static int uvc_v4l2_get_xu_query(struct uvc_xu_control_query *kp, const struct uvc_xu_control_query32 __user *up) { - u8 __user *udata; - u8 __user *kdata; compat_caddr_t p; if (!access_ok(VERIFY_READ, up, sizeof(*up)) || @@ -1361,17 +1333,7 @@ static int uvc_v4l2_get_xu_query(struct uvc_xu_control_query *kp, if (__get_user(p, &up->data)) return -EFAULT; - udata = compat_ptr(p); - if (!access_ok(VERIFY_READ, udata, kp->size)) - return -EFAULT; - - kdata = compat_alloc_user_space(kp->size); - if (kdata == NULL) - return -EFAULT; - kp->data = kdata; - - if (copy_in_user(kdata, udata, kp->size)) - return -EFAULT; + kp->data = compat_ptr(p); return 0; } @@ -1379,26 +1341,10 @@ static int uvc_v4l2_get_xu_query(struct uvc_xu_control_query *kp, static int uvc_v4l2_put_xu_query(const struct uvc_xu_control_query *kp, struct uvc_xu_control_query32 __user *up) { - u8 __user *udata; - u8 __user *kdata = kp->data; - compat_caddr_t p; - if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || __copy_to_user(up, kp, offsetof(typeof(*up), data))) return -EFAULT; - if (kp->size == 0) - return 0; - - if (get_user(p, &up->data)) - return -EFAULT; - udata = compat_ptr(p); - if (!access_ok(VERIFY_READ, udata, kp->size)) - return -EFAULT; - - if (copy_in_user(udata, kdata, kp->size)) - return -EFAULT; - return 0; } -- cgit v1.2.3 From 69f1804a9ab602701217a8c23d371f8f36f8b57a Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Mon, 9 May 2016 00:07:46 -0400 Subject: mei: don't use wake_up_interruptible for wr_ctrl wr_ctrl waiters are none interruptible, so should be waken up with call to wake_up and not to wake_up_interruptible. This fixes commit: 7ff4bdd ("mei: fix waiting for wr_ctrl for corner cases.") Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/client.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index eed254da63a8..641c1a566687 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -730,7 +730,7 @@ static void mei_cl_wake_all(struct mei_cl *cl) /* synchronized under device mutex */ if (waitqueue_active(&cl->wait)) { cl_dbg(dev, cl, "Waking up ctrl write clients!\n"); - wake_up_interruptible(&cl->wait); + wake_up(&cl->wait); } } -- cgit v1.2.3 From fc0f7e3317c5f406e6d5520209b4689a4ffecfdf Mon Sep 17 00:00:00 2001 From: Manfred Schlaegl Date: Mon, 6 Jun 2016 10:47:47 +0200 Subject: net: phy: smsc: reintroduced unconditional soft reset We detected some problems using the smsc lan8720a in combination with i.MX28 and tracked this down to commit 21009686662f ("net: phy: smsc: move smsc_phy_config_init reset part in a soft_reset function") With 2100968666 the generic soft reset is replaced by a specific function which handles power down state correctly. But additionally the soft reset itself got conditional and is therefore also only performed if the phy is in power down state. This patch keeps the conditional wake up from power down, but re-introduces the unconditional soft reset using the generic soft reset function. It was tested on linux-4.1.25 and linux-4.7.0-rc2. Signed-off-by: Manfred Schlaegl Signed-off-by: David S. Miller --- drivers/net/phy/smsc.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 2e21e9366f76..b62c4aaee40b 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -75,22 +75,13 @@ static int smsc_phy_reset(struct phy_device *phydev) * in all capable mode before using it. */ if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) { - int timeout = 50000; - - /* set "all capable" mode and reset the phy */ + /* set "all capable" mode */ rc |= MII_LAN83C185_MODE_ALL; phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc); - phy_write(phydev, MII_BMCR, BMCR_RESET); - - /* wait end of reset (max 500 ms) */ - do { - udelay(10); - if (timeout-- == 0) - return -1; - rc = phy_read(phydev, MII_BMCR); - } while (rc & BMCR_RESET); } - return 0; + + /* reset the phy */ + return genphy_soft_reset(phydev); } static int lan911x_config_init(struct phy_device *phydev) -- cgit v1.2.3 From 562c5a70400c75f50d99de631666ac7cc2f03958 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:27:58 +0200 Subject: net: mediatek: add missing return code check The code fails to check if the scratch memory was properly allocated. Add this check and return with an error if the allocation failed. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 4763252bbf85..11cd7304e497 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -495,6 +495,9 @@ static int mtk_init_fq_dma(struct mtk_eth *eth) eth->scratch_head = kcalloc(cnt, MTK_QDMA_PAGE_SIZE, GFP_KERNEL); + if (unlikely(!eth->scratch_head)) + return -ENOMEM; + dma_addr = dma_map_single(eth->dev, eth->scratch_head, cnt * MTK_QDMA_PAGE_SIZE, DMA_FROM_DEVICE); -- cgit v1.2.3 From 605e4fe476956c67ced8518247e6c9601a31b868 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:27:59 +0200 Subject: net: mediatek: fix missing free of scratch memory Scratch memory gets allocated in mtk_init_fq_dma() but the corresponding code to free it is missing inside mtk_dma_free() causing a memory leak. With this patch applied, we can run ifconfig up/down several thousand times without any problems. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 18 +++++++++++++----- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 ++ 2 files changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 11cd7304e497..fb8b17db7fa2 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -481,14 +481,14 @@ static inline void mtk_rx_get_desc(struct mtk_rx_dma *rxd, /* the qdma core needs scratch memory to be setup */ static int mtk_init_fq_dma(struct mtk_eth *eth) { - dma_addr_t phy_ring_head, phy_ring_tail; + dma_addr_t phy_ring_tail; int cnt = MTK_DMA_SIZE; dma_addr_t dma_addr; int i; eth->scratch_ring = dma_alloc_coherent(eth->dev, cnt * sizeof(struct mtk_tx_dma), - &phy_ring_head, + ð->phy_scratch_ring, GFP_ATOMIC | __GFP_ZERO); if (unlikely(!eth->scratch_ring)) return -ENOMEM; @@ -505,19 +505,19 @@ static int mtk_init_fq_dma(struct mtk_eth *eth) return -ENOMEM; memset(eth->scratch_ring, 0x0, sizeof(struct mtk_tx_dma) * cnt); - phy_ring_tail = phy_ring_head + + phy_ring_tail = eth->phy_scratch_ring + (sizeof(struct mtk_tx_dma) * (cnt - 1)); for (i = 0; i < cnt; i++) { eth->scratch_ring[i].txd1 = (dma_addr + (i * MTK_QDMA_PAGE_SIZE)); if (i < cnt - 1) - eth->scratch_ring[i].txd2 = (phy_ring_head + + eth->scratch_ring[i].txd2 = (eth->phy_scratch_ring + ((i + 1) * sizeof(struct mtk_tx_dma))); eth->scratch_ring[i].txd3 = TX_DMA_SDL(MTK_QDMA_PAGE_SIZE); } - mtk_w32(eth, phy_ring_head, MTK_QDMA_FQ_HEAD); + mtk_w32(eth, eth->phy_scratch_ring, MTK_QDMA_FQ_HEAD); mtk_w32(eth, phy_ring_tail, MTK_QDMA_FQ_TAIL); mtk_w32(eth, (cnt << 16) | cnt, MTK_QDMA_FQ_CNT); mtk_w32(eth, MTK_QDMA_PAGE_SIZE << 16, MTK_QDMA_FQ_BLEN); @@ -1210,6 +1210,14 @@ static void mtk_dma_free(struct mtk_eth *eth) for (i = 0; i < MTK_MAC_COUNT; i++) if (eth->netdev[i]) netdev_reset_queue(eth->netdev[i]); + if (eth->scratch_ring) { + dma_free_coherent(eth->dev, + MTK_DMA_SIZE * sizeof(struct mtk_tx_dma), + eth->scratch_ring, + eth->phy_scratch_ring); + eth->scratch_ring = NULL; + eth->phy_scratch_ring = 0; + } mtk_tx_clean(eth); mtk_rx_clean(eth); kfree(eth->scratch_head); diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index eed626d56ea4..57f7e8a3dbe2 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -357,6 +357,7 @@ struct mtk_rx_ring { * @rx_ring: Pointer to the memore holding info about the RX ring * @rx_napi: The NAPI struct * @scratch_ring: Newer SoCs need memory for a second HW managed TX ring + * @phy_scratch_ring: physical address of scratch_ring * @scratch_head: The scratch memory that scratch_ring points to. * @clk_ethif: The ethif clock * @clk_esw: The switch clock @@ -384,6 +385,7 @@ struct mtk_eth { struct mtk_rx_ring rx_ring; struct napi_struct rx_napi; struct mtk_tx_dma *scratch_ring; + dma_addr_t phy_scratch_ring; void *scratch_head; struct clk *clk_ethif; struct clk *clk_esw; -- cgit v1.2.3 From 2fae723cefb8bfe712371978288aa0a70b54802e Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:00 +0200 Subject: net: mediatek: invalid buffer lookup in mtk_tx_map() The lookup of the tx_buffer in the error path inside mtk_tx_map() uses the wrong descriptor pointer. This looks like a copy & paste error. Change the code to use the correct pointer. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index fb8b17db7fa2..8c3e54387948 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -674,7 +674,7 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, err_dma: do { - tx_buf = mtk_desc_to_tx_buf(ring, txd); + tx_buf = mtk_desc_to_tx_buf(ring, itxd); /* unmap dma */ mtk_tx_unmap(&dev->dev, tx_buf); -- cgit v1.2.3 From 94321a9fc9f5b6c6e949cc7c69741538f556ab74 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:01 +0200 Subject: net: mediatek: dropped rx packets are not being counted properly There are two places inside mtk_poll_rx where rx_dropped is not being incremented properly. Fix this by adding the missing code to increment the counter. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 8c3e54387948..b6d3c217722d 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -829,6 +829,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget, DMA_FROM_DEVICE); if (unlikely(dma_mapping_error(&netdev->dev, dma_addr))) { skb_free_frag(new_data); + netdev->stats.rx_dropped++; goto release_desc; } @@ -836,6 +837,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget, skb = build_skb(data, ring->frag_size); if (unlikely(!skb)) { put_page(virt_to_head_page(new_data)); + netdev->stats.rx_dropped++; goto release_desc; } skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN); -- cgit v1.2.3 From 6675086d04e7c0748cd5884f7c8611b5f0836250 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:02 +0200 Subject: net: mediatek: add next data pointer coherency protection The QDMA engine can fail to update the register pointing to the next TX descriptor if this bit does not get set in the QDMA configuration register. Not setting this bit can result in invalid values inside the TX rings registers which will causes TX stalls. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index b6d3c217722d..f30c2e474b87 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1282,7 +1282,7 @@ static int mtk_start_dma(struct mtk_eth *eth) mtk_w32(eth, MTK_TX_WB_DDONE | MTK_RX_DMA_EN | MTK_TX_DMA_EN | MTK_RX_2B_OFFSET | MTK_DMA_SIZE_16DWORDS | - MTK_RX_BT_32DWORDS, + MTK_RX_BT_32DWORDS | MTK_NDP_CO_PRO, MTK_QDMA_GLO_CFG); return 0; diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index 57f7e8a3dbe2..a5eb7c62306b 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -91,6 +91,7 @@ #define MTK_QDMA_GLO_CFG 0x1A04 #define MTK_RX_2B_OFFSET BIT(31) #define MTK_RX_BT_32DWORDS (3 << 11) +#define MTK_NDP_CO_PRO BIT(10) #define MTK_TX_WB_DDONE BIT(6) #define MTK_DMA_SIZE_16DWORDS (2 << 4) #define MTK_RX_DMA_BUSY BIT(3) -- cgit v1.2.3 From 2ff0bb61646f286fa97db2904491974302a14f1f Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:03 +0200 Subject: net: mediatek: disable all interrupts during probe The current code only disables those IRQs that we will later use. To ensure that we have a predefined state, we really want to disable all IRQs. Change the code to disable all IRQs to achieve this. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index f30c2e474b87..e3dadae9f6dd 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1396,7 +1396,7 @@ static int __init mtk_hw_init(struct mtk_eth *eth) /* disable delay and normal interrupt */ mtk_w32(eth, 0, MTK_QDMA_DELAY_INT); - mtk_irq_disable(eth, MTK_TX_DONE_INT | MTK_RX_DONE_INT); + mtk_irq_disable(eth, ~0); mtk_w32(eth, RST_GL_PSE, MTK_RST_GL); mtk_w32(eth, 0, MTK_RST_GL); -- cgit v1.2.3 From 04698cccb1de54d5d97fda2e4a1c6ca365da0f70 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:04 +0200 Subject: net: mediatek: fix threshold value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The logic to calculate the threshold value for stopping the TX queue is bad. Currently it will always use 1/2 of the rings size, which is way too much. Set the threshold to MAX_SKB_FRAGS. This makes sure that the queue is stopped when there is not enough room to accept an additional segment.  Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index e3dadae9f6dd..032939d211a7 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1033,8 +1033,7 @@ static int mtk_tx_alloc(struct mtk_eth *eth) atomic_set(&ring->free_count, MTK_DMA_SIZE - 2); ring->next_free = &ring->dma[0]; ring->last_free = &ring->dma[MTK_DMA_SIZE - 2]; - ring->thresh = max((unsigned long)MTK_DMA_SIZE >> 2, - MAX_SKB_FRAGS); + ring->thresh = MAX_SKB_FRAGS; /* make sure that all changes to the dma ring are flushed before we * continue -- cgit v1.2.3 From eaadf9fd3f6390f6ecbd0dfbd5997a0486fc9d5e Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:05 +0200 Subject: net: mediatek: increase watchdog_timeo During stress testing, after reducing the threshold value, we have seen TX timeouts that were caused by the watchdog_timeo value being too low. Increase the value to 5 * HZ which is a value commonly used by many other drivers. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 032939d211a7..3b3ba2e55bdc 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1709,7 +1709,7 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) mac->hw_stats->reg_offset = id * MTK_STAT_OFFSET; SET_NETDEV_DEV(eth->netdev[id], eth->dev); - eth->netdev[id]->watchdog_timeo = HZ; + eth->netdev[id]->watchdog_timeo = 5 * HZ; eth->netdev[id]->netdev_ops = &mtk_netdev_ops; eth->netdev[id]->base_addr = (unsigned long)eth->base; eth->netdev[id]->vlan_features = MTK_HW_FEATURES & -- cgit v1.2.3 From 12c97c13ea7174db5b5dc4a1ef91d4e9245bb569 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:06 +0200 Subject: net: mediatek: fix off by one in the TX ring allocation The TX ring setup has an off by one error causing it to not utilise all descriptors. This has the side effect that we need to reset the next pointer at runtime to make it work. Fix the off by one and remove the code fixing the ring at runtime. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 3b3ba2e55bdc..c097e9e3926c 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -926,7 +926,6 @@ static int mtk_poll_tx(struct mtk_eth *eth, int budget, bool *tx_again) } mtk_tx_unmap(eth->dev, tx_buf); - ring->last_free->txd2 = next_cpu; ring->last_free = desc; atomic_inc(&ring->free_count); @@ -1032,7 +1031,7 @@ static int mtk_tx_alloc(struct mtk_eth *eth) atomic_set(&ring->free_count, MTK_DMA_SIZE - 2); ring->next_free = &ring->dma[0]; - ring->last_free = &ring->dma[MTK_DMA_SIZE - 2]; + ring->last_free = &ring->dma[MTK_DMA_SIZE - 1]; ring->thresh = MAX_SKB_FRAGS; /* make sure that all changes to the dma ring are flushed before we -- cgit v1.2.3 From ad3cba989e8b1bbefe078eece29f0e8d8aaea1d6 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:07 +0200 Subject: net: mediatek: only wake the queue if it is stopped The current code unconditionally wakes up the queue at the end of each tx_poll action. Change the code to only wake up the queues if any of them have actually been stopped before. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index c097e9e3926c..40e37b158a69 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -704,6 +704,20 @@ static inline int mtk_cal_txd_req(struct sk_buff *skb) return nfrags; } +static int mtk_queue_stopped(struct mtk_eth *eth) +{ + int i; + + for (i = 0; i < MTK_MAC_COUNT; i++) { + if (!eth->netdev[i]) + continue; + if (netif_queue_stopped(eth->netdev[i])) + return 1; + } + + return 0; +} + static void mtk_wake_queue(struct mtk_eth *eth) { int i; @@ -950,7 +964,8 @@ static int mtk_poll_tx(struct mtk_eth *eth, int budget, bool *tx_again) if (!total) return 0; - if (atomic_read(&ring->free_count) > ring->thresh) + if (mtk_queue_stopped(eth) && + (atomic_read(&ring->free_count) > ring->thresh)) mtk_wake_queue(eth); return total; -- cgit v1.2.3 From 82c6544dddc6c4bd940917af2f987dee6be0fc17 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:08 +0200 Subject: net: mediatek: remove superfluous queue wake up call The code checks if the queue should be stopped because we are below the threshold of free descriptors only to check if it should be started again. If we do end up in a state where we are at the threshold limit, it makes more sense to just stop the queue and wait for the next IRQ to trigger the TX housekeeping again. There is no rush in enqueuing the next packet, it needs to wait for all the others in the queue to be dispatched first anyway. Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 40e37b158a69..d1cdc2d76151 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -783,12 +783,9 @@ static int mtk_start_xmit(struct sk_buff *skb, struct net_device *dev) if (mtk_tx_map(skb, dev, tx_num, ring, gso) < 0) goto drop; - if (unlikely(atomic_read(&ring->free_count) <= ring->thresh)) { + if (unlikely(atomic_read(&ring->free_count) <= ring->thresh)) mtk_stop_queue(eth); - if (unlikely(atomic_read(&ring->free_count) > - ring->thresh)) - mtk_wake_queue(eth); - } + spin_unlock_irqrestore(ð->page_lock, flags); return NETDEV_TX_OK; -- cgit v1.2.3 From a2f27217e4e60e663b5b971b0ccb287a9548b04e Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Fri, 10 Jun 2016 16:53:05 +0200 Subject: net: au1000_eth: fix PHY detection Commit 7f854420fbfe9d49afe2ffb1df052cfe8e215541 ("phy: Add API for {un}registering an mdio device to a bus.") broke PHY detection on this driver with a copy-paste bug: The code is looking 32 times for a PHY at address 0. Fixes ethernet on AMD DB1100/DB1500/DB1550 boards which have their (autodetected) PHYs at address 31. Cc: Andrew Lunn Signed-off-by: Manuel Lauss Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/au1000_eth.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index e0fb0f1122db..d8c77e8e25ed 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -508,13 +508,12 @@ static int au1000_mii_probe(struct net_device *dev) /* find the first (lowest address) PHY * on the current MAC's MII bus */ - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) - if (mdiobus_get_phy(aup->mii_bus, aup->phy_addr)) { - phydev = mdiobus_get_phy(aup->mii_bus, aup->phy_addr); - if (!aup->phy_search_highest_addr) - /* break out with first one found */ - break; - } + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { + phydev = mdiobus_get_phy(aup->mii_bus, phy_addr); + if (phydev && !aup->phy_search_highest_addr) + /* break out with first one found */ + break; + } if (aup->phy1_search_mac0) { /* try harder to find a PHY */ -- cgit v1.2.3 From 86c5fe4c932a8ef2d32f8b3d32cc9f0476fc54f3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 10 Jun 2016 23:34:24 -0700 Subject: Revert "net: au1000_eth: fix PHY detection" This reverts commit a2f27217e4e60e663b5b971b0ccb287a9548b04e. I applied the wrong version of this. Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/au1000_eth.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index d8c77e8e25ed..e0fb0f1122db 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -508,12 +508,13 @@ static int au1000_mii_probe(struct net_device *dev) /* find the first (lowest address) PHY * on the current MAC's MII bus */ - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { - phydev = mdiobus_get_phy(aup->mii_bus, phy_addr); - if (phydev && !aup->phy_search_highest_addr) - /* break out with first one found */ - break; - } + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) + if (mdiobus_get_phy(aup->mii_bus, aup->phy_addr)) { + phydev = mdiobus_get_phy(aup->mii_bus, aup->phy_addr); + if (!aup->phy_search_highest_addr) + /* break out with first one found */ + break; + } if (aup->phy1_search_mac0) { /* try harder to find a PHY */ -- cgit v1.2.3 From 92ca8241533009e4e05a9f3999a75389678af094 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sat, 11 Jun 2016 00:13:04 +0200 Subject: net: au1000_eth: fix PHY detection Commit 7f854420fbfe9d49afe2ffb1df052cfe8e215541 ("phy: Add API for {un}registering an mdio device to a bus.") broke PHY detection on this driver with a copy-paste bug: The code is looking 32 times for a PHY at address 0. Fixes ethernet on AMD DB1100/DB1500/DB1550 boards which have their (autodetected) PHYs at address 31. Cc: Andrew Lunn Signed-off-by: Manuel Lauss Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/au1000_eth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index e0fb0f1122db..20760e10211a 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -509,8 +509,8 @@ static int au1000_mii_probe(struct net_device *dev) * on the current MAC's MII bus */ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) - if (mdiobus_get_phy(aup->mii_bus, aup->phy_addr)) { - phydev = mdiobus_get_phy(aup->mii_bus, aup->phy_addr); + if (mdiobus_get_phy(aup->mii_bus, phy_addr)) { + phydev = mdiobus_get_phy(aup->mii_bus, phy_addr); if (!aup->phy_search_highest_addr) /* break out with first one found */ break; -- cgit v1.2.3 From 6e85dbe4b461e59fa3cad6f6235cb47fa4c6a629 Mon Sep 17 00:00:00 2001 From: Crestez Dan Leonard Date: Fri, 3 Jun 2016 21:30:24 +0300 Subject: iio: inv_mpu6050: Fix use-after-free in ACPI code In some cases this can result in incorrectly returning a negative value from asus_acpi_get_sensor_info and the AK8963 magnetometer failing to show up. Note cpm is an alias for buffer.pointer which isn't apparent in this patch on it's own. Cc: Srinivas Pandruvada Signed-off-by: Crestez Dan Leonard Acked-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c index f62b8bd9ad7e..dd6fc6d21f9d 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c @@ -56,6 +56,7 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev, int i; acpi_status status; union acpi_object *cpm; + int ret; status = acpi_evaluate_object(adev->handle, "CNF0", NULL, &buffer); if (ACPI_FAILURE(status)) @@ -82,10 +83,10 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev, } } } - + ret = cpm->package.count; kfree(buffer.pointer); - return cpm->package.count; + return ret; } static int acpi_i2c_check_resource(struct acpi_resource *ares, void *data) -- cgit v1.2.3 From 7e982555d89cc84b1fa23b5d54c7ffd9f7753908 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 May 2016 15:50:24 +0200 Subject: staging: iio: fix ad7606_spi regression MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As pointed out by Geert Uytterhoeven, the patch was incorrect and breaks the driver, which was fortunately pointed out by this gcc warning: drivers/staging/iio/adc/ad7606_spi.c: In function ‘ad7606_spi_read_block’: drivers/staging/iio/adc/ad7606_spi.c:34: warning: ‘data’ is used uninitialized in this function The effect of the patch is that the data is copied into a random memory location (from the uninitialized pointer) instead of being byteswapped in place. This adds the initialization for the 'data' variable back to restore the original behavior. Cc: Ksenija Stanojevic Fixes: 87787e5ef727 ("Staging: iio: Fix sparse endian warning") Signed-off-by: Arnd Bergmann Acked-by: Geert Uytterhoeven Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7606_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c index 825da0769936..9587fa86dc69 100644 --- a/drivers/staging/iio/adc/ad7606_spi.c +++ b/drivers/staging/iio/adc/ad7606_spi.c @@ -21,7 +21,7 @@ static int ad7606_spi_read_block(struct device *dev, { struct spi_device *spi = to_spi_device(dev); int i, ret; - unsigned short *data; + unsigned short *data = buf; __be16 *bdata = buf; ret = spi_read(spi, buf, count * 2); -- cgit v1.2.3 From f4070a19142d5ee06f0da0cef56a0e78995f172c Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Wed, 1 Jun 2016 20:25:54 +0100 Subject: staging: iio: ad5933: fix order of cycle conditions Correctly handle the settling time cycles value. The else branch is an impossible condition, > 1022 in the else branch of > 511. Flipping the order. Based on the Table 13 at the bottom of Page 25 of the Data Sheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5933.pdf Signed-off-by: Luis de Bethencourt Reviewed-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/impedance-analyzer/ad5933.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index 9f43976f4ef2..170ac980abcb 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -444,10 +444,10 @@ static ssize_t ad5933_store(struct device *dev, st->settling_cycles = val; /* 2x, 4x handling, see datasheet */ - if (val > 511) - val = (val >> 1) | (1 << 9); - else if (val > 1022) + if (val > 1022) val = (val >> 2) | (3 << 9); + else if (val > 511) + val = (val >> 1) | (1 << 9); dat = cpu_to_be16(val); ret = ad5933_i2c_write(st->client, -- cgit v1.2.3 From d941ebe88a411aa281cc80477a93feb931a1b50b Mon Sep 17 00:00:00 2001 From: Ivan Khoronzhuk Date: Sat, 11 Jun 2016 01:11:54 +0300 Subject: net: ethernet: ti: cpsw: use destroy ctlr to destroy channels There is no reason to destroy channels that are destroyed while cpdma_ctlr destroy. In this case no need to remember how much channels where created and destroy them by one, as cpdma_ctlr destroys all of them. Signed-off-by: Ivan Khoronzhuk Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index e6bb0ecb12c7..53190894f17a 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2505,8 +2505,6 @@ static int cpsw_probe(struct platform_device *pdev) clean_ale_ret: cpsw_ale_destroy(priv->ale); clean_dma_ret: - cpdma_chan_destroy(priv->txch); - cpdma_chan_destroy(priv->rxch); cpdma_ctlr_destroy(priv->dma); clean_runtime_disable_ret: pm_runtime_disable(&pdev->dev); @@ -2534,8 +2532,6 @@ static int cpsw_remove(struct platform_device *pdev) unregister_netdev(ndev); cpsw_ale_destroy(priv->ale); - cpdma_chan_destroy(priv->txch); - cpdma_chan_destroy(priv->rxch); cpdma_ctlr_destroy(priv->dma); pm_runtime_disable(&pdev->dev); device_for_each_child(&pdev->dev, NULL, cpsw_remove_child_device); -- cgit v1.2.3 From 3bfbb4d1a480cc17f6ccfce13b76eb6c0dbeaf8c Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 2 Jun 2016 11:23:15 +0100 Subject: regulator: qcom_smd: add list_voltage callback This patch adds support to list_voltage callback, so that consumers like mmc core, can get information of supported voltage range. Without this patch there is no way for mmc core to know this voltage range. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- drivers/regulator/qcom_smd-regulator.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 6c7fe4778793..526bf23dcb49 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -152,6 +152,7 @@ static const struct regulator_ops rpm_smps_ldo_ops_fixed = { .enable = rpm_reg_enable, .disable = rpm_reg_disable, .is_enabled = rpm_reg_is_enabled, + .list_voltage = regulator_list_voltage_linear_range, .get_voltage = rpm_reg_get_voltage, .set_voltage = rpm_reg_set_voltage, -- cgit v1.2.3 From 9aeb26cfc2abc96be42b9df2d0f2dc5d805084ff Mon Sep 17 00:00:00 2001 From: Jean-Philippe Brucker Date: Fri, 3 Jun 2016 11:50:30 +0100 Subject: iommu/arm-smmu: Wire up map_sg for arm-smmu-v3 The map_sg callback is missing from arm_smmu_ops, but is required by iommu.h. Similarly to most other IOMMU drivers, connect it to default_iommu_map_sg. Cc: Signed-off-by: Jean-Philippe Brucker Signed-off-by: Will Deacon Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu-v3.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index 94b68213c50d..5f6b3bcab078 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -1941,6 +1941,7 @@ static struct iommu_ops arm_smmu_ops = { .attach_dev = arm_smmu_attach_dev, .map = arm_smmu_map, .unmap = arm_smmu_unmap, + .map_sg = default_iommu_map_sg, .iova_to_phys = arm_smmu_iova_to_phys, .add_device = arm_smmu_add_device, .remove_device = arm_smmu_remove_device, -- cgit v1.2.3 From 975f57fdff1d0eb9816806cabd27162a8a1a4038 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 10 Jun 2016 16:47:02 +1000 Subject: crypto: vmx - Fix ABI detection When calling ppc-xlate.pl, we pass it either linux-ppc64 or linux-ppc64le. The script however was expecting linux64le, a result of its OpenSSL origins. This means we aren't obeying the ppc64le ABIv2 rules. Fix this by checking for linux-ppc64le. Fixes: 5ca55738201c ("crypto: vmx - comply with ABIs that specify vrsave as reserved.") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard Signed-off-by: Herbert Xu --- drivers/crypto/vmx/ppc-xlate.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/crypto/vmx/ppc-xlate.pl b/drivers/crypto/vmx/ppc-xlate.pl index 9f4994cabcc7..b18e67d0e065 100644 --- a/drivers/crypto/vmx/ppc-xlate.pl +++ b/drivers/crypto/vmx/ppc-xlate.pl @@ -141,7 +141,7 @@ my $vmr = sub { # Some ABIs specify vrsave, special-purpose register #256, as reserved # for system use. -my $no_vrsave = ($flavour =~ /aix|linux64le/); +my $no_vrsave = ($flavour =~ /linux-ppc64le/); my $mtspr = sub { my ($f,$idx,$ra) = @_; if ($idx == 256 && $no_vrsave) { -- cgit v1.2.3 From 12d3f49e1ffbbf8cbbb60acae5a21103c5c841ac Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 10 Jun 2016 16:47:03 +1000 Subject: crypto: vmx - Increase priority of aes-cbc cipher All of the VMX AES ciphers (AES, AES-CBC and AES-CTR) are set at priority 1000. Unfortunately this means we never use AES-CBC and AES-CTR, because the base AES-CBC cipher that is implemented on top of AES inherits its priority. To fix this, AES-CBC and AES-CTR have to be a higher priority. Set them to 2000. Testing on a POWER8 with: cryptsetup benchmark --cipher aes --key-size 256 Shows decryption speed increase from 402.4 MB/s to 3069.2 MB/s, over 7x faster. Thanks to Mike Strosaker for helping me debug this issue. Fixes: 8c755ace357c ("crypto: vmx - Adding CBC routines for VMX module") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard Signed-off-by: Herbert Xu --- drivers/crypto/vmx/aes_cbc.c | 2 +- drivers/crypto/vmx/aes_ctr.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/vmx/aes_cbc.c b/drivers/crypto/vmx/aes_cbc.c index 495577b6d31b..94ad5c0adbcb 100644 --- a/drivers/crypto/vmx/aes_cbc.c +++ b/drivers/crypto/vmx/aes_cbc.c @@ -182,7 +182,7 @@ struct crypto_alg p8_aes_cbc_alg = { .cra_name = "cbc(aes)", .cra_driver_name = "p8_aes_cbc", .cra_module = THIS_MODULE, - .cra_priority = 1000, + .cra_priority = 2000, .cra_type = &crypto_blkcipher_type, .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | CRYPTO_ALG_NEED_FALLBACK, .cra_alignmask = 0, diff --git a/drivers/crypto/vmx/aes_ctr.c b/drivers/crypto/vmx/aes_ctr.c index 0a3c1b04cf3c..38ed10d761d0 100644 --- a/drivers/crypto/vmx/aes_ctr.c +++ b/drivers/crypto/vmx/aes_ctr.c @@ -166,7 +166,7 @@ struct crypto_alg p8_aes_ctr_alg = { .cra_name = "ctr(aes)", .cra_driver_name = "p8_aes_ctr", .cra_module = THIS_MODULE, - .cra_priority = 1000, + .cra_priority = 2000, .cra_type = &crypto_blkcipher_type, .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | CRYPTO_ALG_NEED_FALLBACK, .cra_alignmask = 0, -- cgit v1.2.3 From 19ced623db2fe91604d69f7d86b03144c5107739 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 8 Jun 2016 14:56:39 +0200 Subject: crypto: ux500 - memmove the right size The hash buffer is really HASH_BLOCK_SIZE bytes, someone must have thought that memmove takes n*u32 words by mistake. Tests work as good/bad as before after this patch. Cc: Joakim Bech Cc: stable@vger.kernel.org Reported-by: David Binderman Signed-off-by: Linus Walleij Signed-off-by: Herbert Xu --- drivers/crypto/ux500/hash/hash_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index 574e87c7f2b8..9acccad26928 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -781,7 +781,7 @@ static int hash_process_data(struct hash_device_data *device_data, &device_data->state); memmove(req_ctx->state.buffer, device_data->state.buffer, - HASH_BLOCK_SIZE / sizeof(u32)); + HASH_BLOCK_SIZE); if (ret) { dev_err(device_data->dev, "%s: hash_resume_state() failed!\n", @@ -832,7 +832,7 @@ static int hash_process_data(struct hash_device_data *device_data, memmove(device_data->state.buffer, req_ctx->state.buffer, - HASH_BLOCK_SIZE / sizeof(u32)); + HASH_BLOCK_SIZE); if (ret) { dev_err(device_data->dev, "%s: hash_save_state() failed!\n", __func__); -- cgit v1.2.3 From 053ae6499a5634c0dc5fa18437e1af3d2f2ec98e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 13 Jun 2016 13:48:53 +0800 Subject: gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock Fixes: 9ae482104cb9 ("gpio: 104-idi-48: Clear pending interrupt once in IRQ handler") Signed-off-by: Axel Lin Acked-by: William Breathitt Gray Signed-off-by: Linus Walleij --- drivers/gpio/gpio-104-idi-48.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c index 6c75c83baf5a..2d2763ea1a68 100644 --- a/drivers/gpio/gpio-104-idi-48.c +++ b/drivers/gpio/gpio-104-idi-48.c @@ -247,6 +247,7 @@ static int idi_48_probe(struct device *dev, unsigned int id) idi48gpio->irq = irq[id]; spin_lock_init(&idi48gpio->lock); + spin_lock_init(&idi48gpio->ack_lock); dev_set_drvdata(dev, idi48gpio); -- cgit v1.2.3 From ae4ea9a2460c7fee2ae8feeb4dfe96f5f6c3e562 Mon Sep 17 00:00:00 2001 From: Junichi Nomura Date: Fri, 10 Jun 2016 04:31:52 +0000 Subject: ipmi: Remove smi_msg from waiting_rcv_msgs list before handle_one_recv_msg() Commit 7ea0ed2b5be8 ("ipmi: Make the message handler easier to use for SMI interfaces") changed handle_new_recv_msgs() to call handle_one_recv_msg() for a smi_msg while the smi_msg is still connected to waiting_rcv_msgs list. That could lead to following list corruption problems: 1) low-level function treats smi_msg as not connected to list handle_one_recv_msg() could end up calling smi_send(), which assumes the msg is not connected to list. For example, the following sequence could corrupt list by doing list_add_tail() for the entry still connected to other list. handle_new_recv_msgs() msg = list_entry(waiting_rcv_msgs) handle_one_recv_msg(msg) handle_ipmb_get_msg_cmd(msg) smi_send(msg) spin_lock(xmit_msgs_lock) list_add_tail(msg) spin_unlock(xmit_msgs_lock) 2) race between multiple handle_new_recv_msgs() instances handle_new_recv_msgs() once releases waiting_rcv_msgs_lock before calling handle_one_recv_msg() then retakes the lock and list_del() it. If others call handle_new_recv_msgs() during the window shown below list_del() will be done twice for the same smi_msg. handle_new_recv_msgs() spin_lock(waiting_rcv_msgs_lock) msg = list_entry(waiting_rcv_msgs) spin_unlock(waiting_rcv_msgs_lock) | | handle_one_recv_msg(msg) | spin_lock(waiting_rcv_msgs_lock) list_del(msg) spin_unlock(waiting_rcv_msgs_lock) Fixes: 7ea0ed2b5be8 ("ipmi: Make the message handler easier to use for SMI interfaces") Signed-off-by: Jun'ichi Nomura [Added a comment to describe why this works.] Signed-off-by: Corey Minyard Cc: stable@vger.kernel.org # 3.19 Tested-by: Ye Feng --- drivers/char/ipmi/ipmi_msghandler.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 94fb407d8561..44b1bd6baa38 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -3820,6 +3820,7 @@ static void handle_new_recv_msgs(ipmi_smi_t intf) while (!list_empty(&intf->waiting_rcv_msgs)) { smi_msg = list_entry(intf->waiting_rcv_msgs.next, struct ipmi_smi_msg, link); + list_del(&smi_msg->link); if (!run_to_completion) spin_unlock_irqrestore(&intf->waiting_rcv_msgs_lock, flags); @@ -3829,11 +3830,14 @@ static void handle_new_recv_msgs(ipmi_smi_t intf) if (rv > 0) { /* * To preserve message order, quit if we - * can't handle a message. + * can't handle a message. Add the message + * back at the head, this is safe because this + * tasklet is the only thing that pulls the + * messages. */ + list_add(&smi_msg->link, &intf->waiting_rcv_msgs); break; } else { - list_del(&smi_msg->link); if (rv == 0) /* Message handled */ ipmi_free_smi_msg(smi_msg); -- cgit v1.2.3 From ccaa2c12fba72f3e547d18e66820e2e6c5883113 Mon Sep 17 00:00:00 2001 From: Jérôme Glisse Date: Tue, 7 Jun 2016 17:43:04 -0400 Subject: drm/radeon: do not hard reset GPU while freezing on r600/r700 family MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Seems r600/r700 does not like hard reset while freezing for hibernation (regression due to 274ad65c9d02bdcbee9bae045517864c3521d530 which itself is a fix for hibernation on some GPU families). Until i can debug further issue with r600, let just disable this for r600/r700 as they are very similar family and bug affecting one likely affect the other. Reviewed-by: Christian König Signed-off-by: Jérôme Glisse Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index e721e6b2766e..e61c7636864d 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1631,7 +1631,7 @@ int radeon_suspend_kms(struct drm_device *dev, bool suspend, radeon_agp_suspend(rdev); pci_save_state(dev->pdev); - if (freeze && rdev->family >= CHIP_R600) { + if (freeze && rdev->family >= CHIP_CEDAR) { rdev->asic->asic_reset(rdev, true); pci_restore_state(dev->pdev); } else if (suspend) { -- cgit v1.2.3 From 9ef8537e68941d858924a3eacee5a1945767cbab Mon Sep 17 00:00:00 2001 From: Christian König Date: Mon, 13 Jun 2016 16:09:53 +0200 Subject: drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Seems to cause problems for some older hardware. Kudos to Thom Kouwenhoven for working a lot with the PLLs and figuring this out. Reviewed-by: Alex Deucher Signed-off-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/atombios_crtc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 2e216e2ea78c..259cd6e6d71c 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -589,7 +589,8 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE61(rdev) || ASIC_IS_DCE8(rdev)) radeon_crtc->pll_flags |= RADEON_PLL_USE_FRAC_FB_DIV; /* use frac fb div on RS780/RS880 */ - if ((rdev->family == CHIP_RS780) || (rdev->family == CHIP_RS880)) + if (((rdev->family == CHIP_RS780) || (rdev->family == CHIP_RS880)) + && !radeon_crtc->ss_enabled) radeon_crtc->pll_flags |= RADEON_PLL_USE_FRAC_FB_DIV; if (ASIC_IS_DCE32(rdev) && mode->clock > 165000) radeon_crtc->pll_flags |= RADEON_PLL_USE_FRAC_FB_DIV; @@ -626,7 +627,7 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, if (radeon_crtc->ss.refdiv) { radeon_crtc->pll_flags |= RADEON_PLL_USE_REF_DIV; radeon_crtc->pll_reference_div = radeon_crtc->ss.refdiv; - if (ASIC_IS_AVIVO(rdev)) + if (rdev->family >= CHIP_RV770) radeon_crtc->pll_flags |= RADEON_PLL_USE_FRAC_FB_DIV; } } -- cgit v1.2.3 From 048765ad5af7c8939603b4c6cb96293ffa05e00d Mon Sep 17 00:00:00 2001 From: Andres Rodriguez Date: Sat, 11 Jun 2016 02:51:32 -0400 Subject: amdgpu: fix asic initialization for virtualized environments (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When executing in a PCI passthrough based virtuzliation environemnt, the hypervisor will usually attempt to send a PCIe bus reset signal to the ASIC when the VM reboots. In this scenario, the card is not correctly initialized, but we still consider it to be posted. Therefore, in a passthrough based environemnt we should always post the card to guarantee it is in a good state for driver initialization. However, if we are operating in SR-IOV mode it is up to the GIM driver to manage the asic state, therefore we should not post the card (and shouldn't be able to do it either). v2: add missing semi-colon Reviewed-by: Christian König Signed-off-by: Andres Rodriguez Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 7 +++++++ drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 17 ++++++++++++++++- drivers/gpu/drm/amd/amdgpu/cik.c | 7 +++++++ drivers/gpu/drm/amd/amdgpu/vi.c | 15 +++++++++++++++ 4 files changed, 45 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 01c36b8d6222..70af26d97d28 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -1822,6 +1822,8 @@ struct amdgpu_asic_funcs { /* MM block clocks */ int (*set_uvd_clocks)(struct amdgpu_device *adev, u32 vclk, u32 dclk); int (*set_vce_clocks)(struct amdgpu_device *adev, u32 evclk, u32 ecclk); + /* query virtual capabilities */ + u32 (*get_virtual_caps)(struct amdgpu_device *adev); }; /* @@ -1916,8 +1918,12 @@ void amdgpu_cgs_destroy_device(struct cgs_device *cgs_device); /* GPU virtualization */ +#define AMDGPU_VIRT_CAPS_SRIOV_EN (1 << 0) +#define AMDGPU_VIRT_CAPS_IS_VF (1 << 1) struct amdgpu_virtualization { bool supports_sr_iov; + bool is_virtual; + u32 caps; }; /* @@ -2206,6 +2212,7 @@ amdgpu_get_sdma_instance(struct amdgpu_ring *ring) #define amdgpu_asic_get_xclk(adev) (adev)->asic_funcs->get_xclk((adev)) #define amdgpu_asic_set_uvd_clocks(adev, v, d) (adev)->asic_funcs->set_uvd_clocks((adev), (v), (d)) #define amdgpu_asic_set_vce_clocks(adev, ev, ec) (adev)->asic_funcs->set_vce_clocks((adev), (ev), (ec)) +#define amdgpu_asic_get_virtual_caps(adev) ((adev)->asic_funcs->get_virtual_caps((adev))) #define amdgpu_asic_get_gpu_clock_counter(adev) (adev)->asic_funcs->get_gpu_clock_counter((adev)) #define amdgpu_asic_read_disabled_bios(adev) (adev)->asic_funcs->read_disabled_bios((adev)) #define amdgpu_asic_read_bios_from_rom(adev, b, l) (adev)->asic_funcs->read_bios_from_rom((adev), (b), (l)) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 964f31404f17..66482b429458 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1385,6 +1385,15 @@ static int amdgpu_resume(struct amdgpu_device *adev) return 0; } +static bool amdgpu_device_is_virtual(void) +{ +#ifdef CONFIG_X86 + return boot_cpu_has(X86_FEATURE_HYPERVISOR); +#else + return false; +#endif +} + /** * amdgpu_device_init - initialize the driver * @@ -1519,8 +1528,14 @@ int amdgpu_device_init(struct amdgpu_device *adev, adev->virtualization.supports_sr_iov = amdgpu_atombios_has_gpu_virtualization_table(adev); + /* Check if we are executing in a virtualized environment */ + adev->virtualization.is_virtual = amdgpu_device_is_virtual(); + adev->virtualization.caps = amdgpu_asic_get_virtual_caps(adev); + /* Post card if necessary */ - if (!amdgpu_card_posted(adev)) { + if (!amdgpu_card_posted(adev) || + (adev->virtualization.is_virtual && + !adev->virtualization.caps & AMDGPU_VIRT_CAPS_SRIOV_EN)) { if (!adev->bios) { dev_err(adev->dev, "Card not posted and no BIOS - ignoring\n"); return -EINVAL; diff --git a/drivers/gpu/drm/amd/amdgpu/cik.c b/drivers/gpu/drm/amd/amdgpu/cik.c index 07bc795a4ca9..910431808542 100644 --- a/drivers/gpu/drm/amd/amdgpu/cik.c +++ b/drivers/gpu/drm/amd/amdgpu/cik.c @@ -962,6 +962,12 @@ static bool cik_read_bios_from_rom(struct amdgpu_device *adev, return true; } +static u32 cik_get_virtual_caps(struct amdgpu_device *adev) +{ + /* CIK does not support SR-IOV */ + return 0; +} + static const struct amdgpu_allowed_register_entry cik_allowed_read_registers[] = { {mmGRBM_STATUS, false}, {mmGB_ADDR_CONFIG, false}, @@ -2007,6 +2013,7 @@ static const struct amdgpu_asic_funcs cik_asic_funcs = .get_xclk = &cik_get_xclk, .set_uvd_clocks = &cik_set_uvd_clocks, .set_vce_clocks = &cik_set_vce_clocks, + .get_virtual_caps = &cik_get_virtual_caps, /* these should be moved to their own ip modules */ .get_gpu_clock_counter = &gfx_v7_0_get_gpu_clock_counter, .wait_for_mc_idle = &gmc_v7_0_mc_wait_for_idle, diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index 2c88d0b66cf3..a65c96029476 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -421,6 +421,20 @@ static bool vi_read_bios_from_rom(struct amdgpu_device *adev, return true; } +static u32 vi_get_virtual_caps(struct amdgpu_device *adev) +{ + u32 caps = 0; + u32 reg = RREG32(mmBIF_IOV_FUNC_IDENTIFIER); + + if (REG_GET_FIELD(reg, BIF_IOV_FUNC_IDENTIFIER, IOV_ENABLE)) + caps |= AMDGPU_VIRT_CAPS_SRIOV_EN; + + if (REG_GET_FIELD(reg, BIF_IOV_FUNC_IDENTIFIER, FUNC_IDENTIFIER)) + caps |= AMDGPU_VIRT_CAPS_IS_VF; + + return caps; +} + static const struct amdgpu_allowed_register_entry tonga_allowed_read_registers[] = { {mmGB_MACROTILE_MODE7, true}, }; @@ -1118,6 +1132,7 @@ static const struct amdgpu_asic_funcs vi_asic_funcs = .get_xclk = &vi_get_xclk, .set_uvd_clocks = &vi_set_uvd_clocks, .set_vce_clocks = &vi_set_vce_clocks, + .get_virtual_caps = &vi_get_virtual_caps, /* these should be moved to their own ip modules */ .get_gpu_clock_counter = &gfx_v8_0_get_gpu_clock_counter, .wait_for_mc_idle = &gmc_v8_0_mc_wait_for_idle, -- cgit v1.2.3 From 05082b8bbd1a0ffc74235449c4b8930a8c240f85 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 13 Jun 2016 15:37:34 -0400 Subject: drm/radeon: fix asic initialization for virtualized environments When executing in a PCI passthrough based virtuzliation environment, the hypervisor will usually attempt to send a PCIe bus reset signal to the ASIC when the VM reboots. In this scenario, the card is not correctly initialized, but we still consider it to be posted. Therefore, in a passthrough based environemnt we should always post the card to guarantee it is in a good state for driver initialization. Ported from amdgpu commit: amdgpu: fix asic initialization for virtualized environments Cc: Andres Rodriguez Cc: Alex Williamson Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_device.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index e61c7636864d..21c44b2293bc 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -630,6 +630,23 @@ void radeon_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc) /* * GPU helpers function. */ + +/** + * radeon_device_is_virtual - check if we are running is a virtual environment + * + * Check if the asic has been passed through to a VM (all asics). + * Used at driver startup. + * Returns true if virtual or false if not. + */ +static bool radeon_device_is_virtual(void) +{ +#ifdef CONFIG_X86 + return boot_cpu_has(X86_FEATURE_HYPERVISOR); +#else + return false; +#endif +} + /** * radeon_card_posted - check if the hw has already been initialized * @@ -643,6 +660,10 @@ bool radeon_card_posted(struct radeon_device *rdev) { uint32_t reg; + /* for pass through, always force asic_init */ + if (radeon_device_is_virtual()) + return false; + /* required for EFI mode on macbook2,1 which uses an r5xx asic */ if (efi_enabled(EFI_BOOT) && (rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) && -- cgit v1.2.3 From 8b18300c13a1e08e152f6b6a430faac84f986231 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 13 Jun 2016 18:26:24 -0400 Subject: drm/amdgpu/gfx7: fix broken condition check Wrong operator. Reported-by: David Binderman Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c index 8c6ad1e72f02..fc8ff4d3ccf8 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c @@ -4833,7 +4833,7 @@ static int gfx_v7_0_eop_irq(struct amdgpu_device *adev, case 2: for (i = 0; i < adev->gfx.num_compute_rings; i++) { ring = &adev->gfx.compute_ring[i]; - if ((ring->me == me_id) & (ring->pipe == pipe_id)) + if ((ring->me == me_id) && (ring->pipe == pipe_id)) amdgpu_fence_process(ring); } break; -- cgit v1.2.3 From 7c4021d403ca72ce52d39c17d8154974521a82be Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 13 Jun 2016 18:59:17 -0400 Subject: Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx" This reverts commit 2ba272d7bde27e1db2cf1c6cee49b01b7ea08989. The issue fixed by this patch is specific to compute rings and the previous patch was enough. Additionally, this patch as been traced to strange behavior on some CZ systems so we might as well drop it. --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 4 +--- drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c | 9 ++------- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 6 +++--- 3 files changed, 6 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 70af26d97d28..e055d5be1c3c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -799,7 +799,6 @@ struct amdgpu_ring { unsigned cond_exe_offs; u64 cond_exe_gpu_addr; volatile u32 *cond_exe_cpu_addr; - int vmid; }; /* @@ -937,8 +936,7 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, unsigned vm_id, uint64_t pd_addr, uint32_t gds_base, uint32_t gds_size, uint32_t gws_base, uint32_t gws_size, - uint32_t oa_base, uint32_t oa_size, - bool vmid_switch); + uint32_t oa_base, uint32_t oa_size); void amdgpu_vm_reset_id(struct amdgpu_device *adev, unsigned vm_id); uint64_t amdgpu_vm_map_gart(const dma_addr_t *pages_addr, uint64_t addr); int amdgpu_vm_update_page_directory(struct amdgpu_device *adev, diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c index 7a0b1e50f293..34e35423b78e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c @@ -122,7 +122,6 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, bool skip_preamble, need_ctx_switch; unsigned patch_offset = ~0; struct amdgpu_vm *vm; - int vmid = 0, old_vmid = ring->vmid; struct fence *hwf; uint64_t ctx; @@ -136,11 +135,9 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, if (job) { vm = job->vm; ctx = job->ctx; - vmid = job->vm_id; } else { vm = NULL; ctx = 0; - vmid = 0; } if (!ring->ready) { @@ -166,8 +163,7 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, r = amdgpu_vm_flush(ring, job->vm_id, job->vm_pd_addr, job->gds_base, job->gds_size, job->gws_base, job->gws_size, - job->oa_base, job->oa_size, - (ring->current_ctx == ctx) && (old_vmid != vmid)); + job->oa_base, job->oa_size); if (r) { amdgpu_ring_undo(ring); return r; @@ -184,6 +180,7 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, need_ctx_switch = ring->current_ctx != ctx; for (i = 0; i < num_ibs; ++i) { ib = &ibs[i]; + /* drop preamble IBs if we don't have a context switch */ if ((ib->flags & AMDGPU_IB_FLAG_PREAMBLE) && skip_preamble) continue; @@ -191,7 +188,6 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, amdgpu_ring_emit_ib(ring, ib, job ? job->vm_id : 0, need_ctx_switch); need_ctx_switch = false; - ring->vmid = vmid; } if (ring->funcs->emit_hdp_invalidate) @@ -202,7 +198,6 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs, dev_err(adev->dev, "failed to emit fence (%d)\n", r); if (job && job->vm_id) amdgpu_vm_reset_id(adev, job->vm_id); - ring->vmid = old_vmid; amdgpu_ring_undo(ring); return r; } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 62a4c127620f..9f36ed30ba11 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -298,8 +298,7 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, unsigned vm_id, uint64_t pd_addr, uint32_t gds_base, uint32_t gds_size, uint32_t gws_base, uint32_t gws_size, - uint32_t oa_base, uint32_t oa_size, - bool vmid_switch) + uint32_t oa_base, uint32_t oa_size) { struct amdgpu_device *adev = ring->adev; struct amdgpu_vm_id *id = &adev->vm_manager.ids[vm_id]; @@ -313,7 +312,8 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, int r; if (ring->funcs->emit_pipeline_sync && ( - pd_addr != AMDGPU_VM_NO_FLUSH || gds_switch_needed || vmid_switch)) + pd_addr != AMDGPU_VM_NO_FLUSH || gds_switch_needed || + ring->type == AMDGPU_RING_TYPE_COMPUTE)) amdgpu_ring_emit_pipeline_sync(ring); if (ring->funcs->emit_vm_flush && -- cgit v1.2.3 From 7bc364097a89a0a9a5e5e4989d6b3e6fb2027a9e Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Tue, 10 May 2016 12:39:44 +0200 Subject: mcb: Acquire reference to device in probe mcb_probe() does not aqcuire a reference to the probed device but drops one when removing the device. As it is actually using the device, it should grab a reference via get_device(). This could lead to a panic found with a rmmod/modprobe stress test Signed-off-by: Johannes Thumshirn Reported-by: Andreas Werner Tested-by: Andreas Werner Signed-off-by: Greg Kroah-Hartman --- drivers/mcb/mcb-core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mcb/mcb-core.c b/drivers/mcb/mcb-core.c index b73c6e7d28e4..f5923c253f7e 100644 --- a/drivers/mcb/mcb-core.c +++ b/drivers/mcb/mcb-core.c @@ -66,6 +66,7 @@ static int mcb_probe(struct device *dev) if (!found_id) return -ENODEV; + get_device(dev); return mdrv->probe(mdev, found_id); } -- cgit v1.2.3 From 4d2ec8575357d4afc965564e2e910a72fe608d39 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Tue, 10 May 2016 12:39:45 +0200 Subject: mcb: Acquire reference to carrier module in core Acquire a reference to the carrier's kernel module in bus code, so it can't be removed from the kernel while it still has a bus and thus possibly devices attached to it. Signed-off-by: Johannes Thumshirn Reported-by: Andreas Werner Tested-by: Andreas Werner Signed-off-by: Greg Kroah-Hartman --- drivers/mcb/mcb-core.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mcb/mcb-core.c b/drivers/mcb/mcb-core.c index f5923c253f7e..6f2c8522e14a 100644 --- a/drivers/mcb/mcb-core.c +++ b/drivers/mcb/mcb-core.c @@ -61,22 +61,36 @@ static int mcb_probe(struct device *dev) struct mcb_driver *mdrv = to_mcb_driver(dev->driver); struct mcb_device *mdev = to_mcb_device(dev); const struct mcb_device_id *found_id; + struct module *carrier_mod; + int ret; found_id = mcb_match_id(mdrv->id_table, mdev); if (!found_id) return -ENODEV; + carrier_mod = mdev->dev.parent->driver->owner; + if (!try_module_get(carrier_mod)) + return -EINVAL; + get_device(dev); - return mdrv->probe(mdev, found_id); + ret = mdrv->probe(mdev, found_id); + if (ret) + module_put(carrier_mod); + + return ret; } static int mcb_remove(struct device *dev) { struct mcb_driver *mdrv = to_mcb_driver(dev->driver); struct mcb_device *mdev = to_mcb_device(dev); + struct module *carrier_mod; mdrv->remove(mdev); + carrier_mod = mdev->dev.parent->driver->owner; + module_put(carrier_mod); + put_device(&mdev->dev); return 0; -- cgit v1.2.3 From ea1d39a31d3b1b6060b6e83e5a29c069a124c68a Mon Sep 17 00:00:00 2001 From: Oscar Date: Tue, 14 Jun 2016 14:14:35 +0800 Subject: usb: common: otg-fsm: add license to usb-otg-fsm Fix warning about tainted kernel because usb-otg-fsm has no license. WARNING: with this patch usb-otg-fsm module can be loaded but then the kernel will hang. Tested with a udoo quad board. Cc: #v4.1+ Signed-off-by: Oscar Signed-off-by: Peter Chen --- drivers/usb/common/usb-otg-fsm.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c index 9059b7dc185e..2f537bbdda09 100644 --- a/drivers/usb/common/usb-otg-fsm.c +++ b/drivers/usb/common/usb-otg-fsm.c @@ -21,6 +21,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include @@ -450,3 +451,4 @@ int otg_statemachine(struct otg_fsm *fsm) return fsm->state_changed; } EXPORT_SYMBOL_GPL(otg_statemachine); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From ad022c87187b50f50937bd9bcd1ef312442a89af Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Sun, 12 Jun 2016 23:37:53 +0200 Subject: Revert "mtd: switch ubi_open_volume_path() to vfs_stat()" This reverts commit 322ea0bbf3003df17b6253f76e572c37d79a6810. vfs_stat() can only be used on user supplied buffers. UBI's kapi.c is the API to the kernel and therefore vfs_stat() is inappropriate. This solves the problem that mounting any UBIFS will immediately fail with -EINVAL. Cc: Al Viro Signed-off-by: Richard Weinberger --- drivers/mtd/ubi/kapi.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c index 348dbbcbedc8..cc6fa0115c9a 100644 --- a/drivers/mtd/ubi/kapi.c +++ b/drivers/mtd/ubi/kapi.c @@ -301,24 +301,27 @@ EXPORT_SYMBOL_GPL(ubi_open_volume_nm); */ struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode) { - int error, ubi_num, vol_id; - struct kstat stat; + int error, ubi_num, vol_id, mod; + struct inode *inode; + struct path path; dbg_gen("open volume %s, mode %d", pathname, mode); if (!pathname || !*pathname) return ERR_PTR(-EINVAL); - error = vfs_stat(pathname, &stat); + error = kern_path(pathname, LOOKUP_FOLLOW, &path); if (error) return ERR_PTR(error); - if (!S_ISCHR(stat.mode)) - return ERR_PTR(-EINVAL); - - ubi_num = ubi_major2num(MAJOR(stat.rdev)); - vol_id = MINOR(stat.rdev) - 1; + inode = d_backing_inode(path.dentry); + mod = inode->i_mode; + ubi_num = ubi_major2num(imajor(inode)); + vol_id = iminor(inode) - 1; + path_put(&path); + if (!S_ISCHR(mod)) + return ERR_PTR(-EINVAL); if (vol_id >= 0 && ubi_num >= 0) return ubi_open_volume(ubi_num, vol_id, mode); return ERR_PTR(-ENODEV); -- cgit v1.2.3 From 1a498ec45eeabcb246c3c3f5822ed9ac1b4f70d8 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 13 Jun 2016 00:49:03 +0200 Subject: Revert "mtd: switch open_mtd_by_chdev() to use of vfs_stat()" This reverts commit 87f15d4add758fb7fc76655721af94be57a4c17d. vfs_stat() can only be used on user supplied buffers. Cc: Al Viro Signed-off-by: Richard Weinberger --- drivers/mtd/ubi/build.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 16baeb51b2bd..7091fca0fb44 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -1147,19 +1147,22 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) */ static struct mtd_info * __init open_mtd_by_chdev(const char *mtd_dev) { - struct kstat stat; - int err, minor; + int err, major, minor, mode; + struct path path; /* Probably this is an MTD character device node path */ - err = vfs_stat(mtd_dev, &stat); + err = kern_path(mtd_dev, LOOKUP_FOLLOW, &path); if (err) return ERR_PTR(err); /* MTD device number is defined by the major / minor numbers */ - if (MAJOR(stat.rdev) != MTD_CHAR_MAJOR || !S_ISCHR(stat.mode)) + major = imajor(d_backing_inode(path.dentry)); + minor = iminor(d_backing_inode(path.dentry)); + mode = d_backing_inode(path.dentry)->i_mode; + path_put(&path); + if (major != MTD_CHAR_MAJOR || !S_ISCHR(mode)) return ERR_PTR(-EINVAL); - minor = MINOR(stat.rdev); if (minor & 1) /* * Just do not think the "/dev/mtdrX" devices support is need, -- cgit v1.2.3 From 61edc3f3b51d2d3948029197cfff6fef7d94e939 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 13 Jun 2016 00:49:04 +0200 Subject: ubi: Don't bypass ->getattr() Directly accessing inode fields bypasses ->getattr() and can cause problems when the underlying filesystem does not have the default ->getattr() implementation. So instead of obtaining the backing inode via d_backing_inode() use vfs_getattr() and obtain what we need from the kstat struct. Cc: Al Viro Reported-by: Al Viro Signed-off-by: Richard Weinberger --- drivers/mtd/ubi/build.c | 16 ++++++++++------ drivers/mtd/ubi/kapi.c | 17 ++++++++++------- 2 files changed, 20 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 7091fca0fb44..ef3618299494 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -1147,22 +1147,26 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) */ static struct mtd_info * __init open_mtd_by_chdev(const char *mtd_dev) { - int err, major, minor, mode; + int err, minor; struct path path; + struct kstat stat; /* Probably this is an MTD character device node path */ err = kern_path(mtd_dev, LOOKUP_FOLLOW, &path); if (err) return ERR_PTR(err); - /* MTD device number is defined by the major / minor numbers */ - major = imajor(d_backing_inode(path.dentry)); - minor = iminor(d_backing_inode(path.dentry)); - mode = d_backing_inode(path.dentry)->i_mode; + err = vfs_getattr(&path, &stat); path_put(&path); - if (major != MTD_CHAR_MAJOR || !S_ISCHR(mode)) + if (err) + return ERR_PTR(err); + + /* MTD device number is defined by the major / minor numbers */ + if (MAJOR(stat.rdev) != MTD_CHAR_MAJOR || !S_ISCHR(stat.mode)) return ERR_PTR(-EINVAL); + minor = MINOR(stat.rdev); + if (minor & 1) /* * Just do not think the "/dev/mtdrX" devices support is need, diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c index cc6fa0115c9a..a9e2cef7c95c 100644 --- a/drivers/mtd/ubi/kapi.c +++ b/drivers/mtd/ubi/kapi.c @@ -301,9 +301,9 @@ EXPORT_SYMBOL_GPL(ubi_open_volume_nm); */ struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode) { - int error, ubi_num, vol_id, mod; - struct inode *inode; + int error, ubi_num, vol_id; struct path path; + struct kstat stat; dbg_gen("open volume %s, mode %d", pathname, mode); @@ -314,14 +314,17 @@ struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode) if (error) return ERR_PTR(error); - inode = d_backing_inode(path.dentry); - mod = inode->i_mode; - ubi_num = ubi_major2num(imajor(inode)); - vol_id = iminor(inode) - 1; + error = vfs_getattr(&path, &stat); path_put(&path); + if (error) + return ERR_PTR(error); - if (!S_ISCHR(mod)) + if (!S_ISCHR(stat.mode)) return ERR_PTR(-EINVAL); + + ubi_num = ubi_major2num(MAJOR(stat.rdev)); + vol_id = MINOR(stat.rdev) - 1; + if (vol_id >= 0 && ubi_num >= 0) return ubi_open_volume(ubi_num, vol_id, mode); return ERR_PTR(-ENODEV); -- cgit v1.2.3 From cc51846ba81ca179a3be20f6313e3b72531888c1 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 17 May 2016 11:12:32 +0200 Subject: pwm: atmel-hlcdc: Fix default PWM polarity The PWM device exposed by the HLCDC IP is configured with an inverted polarity by default. Registering the PWM chip with the normal polarity was not a problem before commit 42e8992c58d4 ("pwm: Add core infrastructure to allow atomic updates") because the ->set_polarity() hook was called no matter the current polarity state, but this is no longer the case. Signed-off-by: Boris Brezillon Signed-off-by: Thierry Reding --- drivers/pwm/pwm-atmel-hlcdc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c index f994c7eaf41c..14fc011faa32 100644 --- a/drivers/pwm/pwm-atmel-hlcdc.c +++ b/drivers/pwm/pwm-atmel-hlcdc.c @@ -272,7 +272,7 @@ static int atmel_hlcdc_pwm_probe(struct platform_device *pdev) chip->chip.of_pwm_n_cells = 3; chip->chip.can_sleep = 1; - ret = pwmchip_add(&chip->chip); + ret = pwmchip_add_with_polarity(&chip->chip, PWM_POLARITY_INVERSED); if (ret) { clk_disable_unprepare(hlcdc->periph_clk); return ret; -- cgit v1.2.3 From 6d9fe44bd73d567d04d3a68a2d2fa521ab9532f2 Mon Sep 17 00:00:00 2001 From: Michal Suchanek Date: Mon, 13 Jun 2016 17:46:49 +0000 Subject: spi: sun4i: fix FIFO limit When testing SPI without DMA I noticed that filling the FIFO on the spi controller causes timeout. Always leave room for one byte in the FIFO. Signed-off-by: Michal Suchanek Acked-by: Maxime Ripard Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-sun4i.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index 1ddd9e2309b6..e7e4aecb3295 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -179,7 +179,10 @@ static int sun4i_spi_transfer_one(struct spi_master *master, /* We don't support transfer larger than the FIFO */ if (tfr->len > SUN4I_FIFO_DEPTH) - return -EINVAL; + return -EMSGSIZE; + + if (tfr->tx_buf && tfr->len >= SUN4I_FIFO_DEPTH) + return -EMSGSIZE; reinit_completion(&sspi->done); sspi->tx_buf = tfr->tx_buf; @@ -269,8 +272,12 @@ static int sun4i_spi_transfer_one(struct spi_master *master, sun4i_spi_write(sspi, SUN4I_BURST_CNT_REG, SUN4I_BURST_CNT(tfr->len)); sun4i_spi_write(sspi, SUN4I_XMIT_CNT_REG, SUN4I_XMIT_CNT(tx_len)); - /* Fill the TX FIFO */ - sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH); + /* + * Fill the TX FIFO + * Filling the FIFO fully causes timeout for some reason + * at least on spi2 on A10s + */ + sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH - 1); /* Enable the interrupts */ sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC); -- cgit v1.2.3 From 719bd6542044efd9b338a53dba1bef45f40ca169 Mon Sep 17 00:00:00 2001 From: Michal Suchanek Date: Mon, 13 Jun 2016 17:46:49 +0000 Subject: spi: sunxi: fix transfer timeout The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over 1MHz SPI bus takes way longer than that. Calculate the timeout from the actual time the transfer is supposed to take and multiply by 2 for good measure. Signed-off-by: Michal Suchanek Acked-by: Maxime Ripard Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-sun4i.c | 10 +++++++++- drivers/spi/spi-sun6i.c | 10 +++++++++- 2 files changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index e7e4aecb3295..cf007f3b83ec 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -173,6 +173,7 @@ static int sun4i_spi_transfer_one(struct spi_master *master, { struct sun4i_spi *sspi = spi_master_get_devdata(master); unsigned int mclk_rate, div, timeout; + unsigned int start, end, tx_time; unsigned int tx_len = 0; int ret = 0; u32 reg; @@ -286,9 +287,16 @@ static int sun4i_spi_transfer_one(struct spi_master *master, reg = sun4i_spi_read(sspi, SUN4I_CTL_REG); sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH); + tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U); + start = jiffies; timeout = wait_for_completion_timeout(&sspi->done, - msecs_to_jiffies(1000)); + msecs_to_jiffies(tx_time)); + end = jiffies; if (!timeout) { + dev_warn(&master->dev, + "%s: timeout transferring %u bytes@%iHz for %i(%i)ms", + dev_name(&spi->dev), tfr->len, tfr->speed_hz, + jiffies_to_msecs(end - start), tx_time); ret = -ETIMEDOUT; goto out; } diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index 42e2c4bd690a..7fce79a60608 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -160,6 +160,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master, { struct sun6i_spi *sspi = spi_master_get_devdata(master); unsigned int mclk_rate, div, timeout; + unsigned int start, end, tx_time; unsigned int tx_len = 0; int ret = 0; u32 reg; @@ -269,9 +270,16 @@ static int sun6i_spi_transfer_one(struct spi_master *master, reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG); sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH); + tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U); + start = jiffies; timeout = wait_for_completion_timeout(&sspi->done, - msecs_to_jiffies(1000)); + msecs_to_jiffies(tx_time)); + end = jiffies; if (!timeout) { + dev_warn(&master->dev, + "%s: timeout transferring %u bytes@%iHz for %i(%i)ms", + dev_name(&spi->dev), tfr->len, tfr->speed_hz, + jiffies_to_msecs(end - start), tx_time); ret = -ETIMEDOUT; goto out; } -- cgit v1.2.3 From 4b2312bd0592708c85ed94368c874819e7013309 Mon Sep 17 00:00:00 2001 From: Harvey Hunt Date: Mon, 23 May 2016 12:05:52 +0100 Subject: irqchip/mips-gic: Fix IRQs in gic_dev_domain When allocating a new device IRQ, gic_dev_domain_alloc() correctly calls irq_domain_set_hwirq_and_chip(), but gic_irq_domain_alloc() does not. This means that gic_irq_domain believes all IRQs from the dev domain have an hwirq of 0 and creates incorrect mappings in the linear_revmap. As gic_irq_domain is a parent of the gic_dev_domain, this leads to an inability to boot on devices with a GIC. Excerpt of the error: [ 2.297649] irq 0: nobody cared (try booting with the "irqpoll" option) ... [ 2.436963] handlers: [ 2.439492] Disabling IRQ #0 Fix this by calling irq_domain_set_hwirq_and_chip() for both the dev and irq domain. Now that we are modifying the parent domain, be sure to clear it up in case of an allocation error. Fixes: c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by: Harvey Hunt Tested-by: Govindraj Raja # On Pistachio SoC Reviewed-by: Matt Redfearn Cc: linux-mips@linux-mips.org Cc: Qais Yousef Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1464001552-31174-1-git-send-email-harvey.hunt@imgtec.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-mips-gic.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index 3b5e10aa48ab..8a4adbeb2b8c 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -746,6 +746,12 @@ static int gic_irq_domain_alloc(struct irq_domain *d, unsigned int virq, /* verify that it doesn't conflict with an IPI irq */ if (test_bit(spec->hwirq, ipi_resrv)) return -EBUSY; + + hwirq = GIC_SHARED_TO_HWIRQ(spec->hwirq); + + return irq_domain_set_hwirq_and_chip(d, virq, hwirq, + &gic_level_irq_controller, + NULL); } else { base_hwirq = find_first_bit(ipi_resrv, gic_shared_intrs); if (base_hwirq == gic_shared_intrs) { @@ -867,10 +873,14 @@ static int gic_dev_domain_alloc(struct irq_domain *d, unsigned int virq, &gic_level_irq_controller, NULL); if (ret) - return ret; + goto error; } return 0; + +error: + irq_domain_free_irqs_parent(d, virq, nr_irqs); + return ret; } void gic_dev_domain_free(struct irq_domain *d, unsigned int virq, -- cgit v1.2.3 From e50525bef593c3dd0564df676c567d77f7c20322 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 9 Jun 2016 11:33:55 +0530 Subject: ath10k: fix deadlock while processing rx_in_ord_ind commit 5c86d97bcc1d ("ath10k: combine txrx and replenish task") introduced deadlock while processing rx in order indication message for qca6174 based devices. While merging replenish and txrx tasklets, replenish task should be called out of htt rx ring locking since it is also try to acquire the same lock. Unfortunately this issue is not exposed by other solutions (qca988x, qca99x0 & qca4019), as rx_in_ord_ind message is specific to qca6174 based devices. This patch fixes ============================================= [ INFO: possible recursive locking detected ] 4.7.0-rc2-wt-ath+ #1353 Tainted: G E --------------------------------------------- swapper/3/0 is trying to acquire lock: (&(&htt->rx_ring.lock)->rlock){+.-...}, at: [] ath10k_htt_rx_msdu_buff_replenish+0x29/0x90 [ath10k_core] but task is already holding lock: (&(&htt->rx_ring.lock)->rlock){+.-...}, at: [] ath10k_htt_txrx_compl_task+0x21b/0x250 [ath10k_core] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&htt->rx_ring.lock)->rlock); lock(&(&htt->rx_ring.lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by swapper/3/0: #0: (&(&htt->rx_ring.lock)->rlock){+.-...}, at: [] ath10k_htt_txrx_compl_task+0x21b/0x250 [ath10k_core] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=119151 Fixes: 5c86d97bcc1d ("ath10k: combine txrx and replenish task") Reported-by: Mike Lothian Signed-off-by: Rajkumar Manoharan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/htt_rx.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index cc979a4faeb0..813cdd2621a1 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -1904,7 +1904,6 @@ static void ath10k_htt_rx_in_ord_ind(struct ath10k *ar, struct sk_buff *skb) return; } } - ath10k_htt_rx_msdu_buff_replenish(htt); } static void ath10k_htt_rx_tx_fetch_resp_id_confirm(struct ath10k *ar, -- cgit v1.2.3 From e024111f6946f45cf1559a8c6fd48d2d0f696d07 Mon Sep 17 00:00:00 2001 From: Miaoqing Pan Date: Tue, 7 Jun 2016 15:47:07 +0300 Subject: ath9k: fix GPIO mask for AR9462 and AR9565 The incorrect GPIO mask cause kernel warning, when AR9462 access GPIO11. Also fix the mask for AR9565. WARNING: CPU: 1 PID: 199 at ../drivers/net/wireless/ath/ath9k/hw.c:2778 ath9k_hw_gpio_get+0x1a9/0x1b0 [ath9k_hw] CPU: 1 PID: 199 Comm: kworker/u16:9 Not tainted 4.7.0-rc1-next-20160530+ #5 Hardware name: Acer TravelMate P243/BA40_HC, BIOS V1.01 04/20/2012 Workqueue: events_power_efficient rfkill_poll 0000000000000000 ffff88002cf73d28 ffffffff813b8ddc 0000000000000000 0000000000000000 ffff88002cf73d68 ffffffff8107a331 00000ada00000086 ffff880148d9c018 000000000000000b ffff880147e68720 0000000000000200 Call Trace: [] dump_stack+0x63/0x87 [] __warn+0xd1/0xf0 [] warn_slowpath_null+0x1d/0x20 [] ath9k_hw_gpio_get+0x1a9/0x1b0 [ath9k_hw] [] ath9k_rfkill_poll_state+0x34/0x60 [ath9k] [] ieee80211_rfkill_poll+0x33/0x40 [mac80211] [] cfg80211_rfkill_poll+0x2a/0xc0 [cfg80211] [] rfkill_poll+0x24/0x50 [] process_one_work+0x153/0x3f0 [] worker_thread+0x12b/0x4b0 [] ? rescuer_thread+0x340/0x340 [] kthread+0xc9/0xe0 [] ret_from_fork+0x1f/0x40 [] ? kthread_park+0x60/0x60 Fixes: a01ab81b09c5 ("ath9k: define correct GPIO numbers and bits mask") Reported-by: Sudip Mukherjee Tested-by: Sudip Mukherjee Signed-off-by: Miaoqing Pan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/reg.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 9272ca90632b..80ff69f99229 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -1122,12 +1122,12 @@ enum { #define AR9300_NUM_GPIO 16 #define AR9330_NUM_GPIO 16 #define AR9340_NUM_GPIO 23 -#define AR9462_NUM_GPIO 10 +#define AR9462_NUM_GPIO 14 #define AR9485_NUM_GPIO 12 #define AR9531_NUM_GPIO 18 #define AR9550_NUM_GPIO 24 #define AR9561_NUM_GPIO 23 -#define AR9565_NUM_GPIO 12 +#define AR9565_NUM_GPIO 14 #define AR9580_NUM_GPIO 16 #define AR7010_NUM_GPIO 16 @@ -1139,12 +1139,12 @@ enum { #define AR9300_GPIO_MASK 0x0000F4FF #define AR9330_GPIO_MASK 0x0000F4FF #define AR9340_GPIO_MASK 0x0000000F -#define AR9462_GPIO_MASK 0x000003FF +#define AR9462_GPIO_MASK 0x00003FFF #define AR9485_GPIO_MASK 0x00000FFF #define AR9531_GPIO_MASK 0x0000000F #define AR9550_GPIO_MASK 0x0000000F #define AR9561_GPIO_MASK 0x0000000F -#define AR9565_GPIO_MASK 0x00000FFF +#define AR9565_GPIO_MASK 0x00003FFF #define AR9580_GPIO_MASK 0x0000F4FF #define AR7010_GPIO_MASK 0x0000FFFF -- cgit v1.2.3 From 5bc28b93a36e3cb3acc2870fb75cb6ffb182fece Mon Sep 17 00:00:00 2001 From: Rhyland Klein Date: Thu, 9 Jun 2016 17:28:39 -0400 Subject: power_supply: power_supply_read_temp only if use_cnt > 0 Change power_supply_read_temp() to use power_supply_get_property() so that it will check the use_cnt and ensure it is > 0. The use_cnt will be incremented at the end of __power_supply_register, so this will block to case where get_property can be called before the supply is fully registered. This fixes the issue show in the stack below: [ 1.452598] power_supply_read_temp+0x78/0x80 [ 1.458680] thermal_zone_get_temp+0x5c/0x11c [ 1.464765] thermal_zone_device_update+0x34/0xb4 [ 1.471195] thermal_zone_device_register+0x87c/0x8cc [ 1.477974] __power_supply_register+0x364/0x424 [ 1.484317] power_supply_register_no_ws+0x10/0x18 [ 1.490833] bq27xxx_battery_setup+0x10c/0x164 [ 1.497003] bq27xxx_battery_i2c_probe+0xd0/0x1b0 [ 1.503435] i2c_device_probe+0x174/0x240 [ 1.509172] driver_probe_device+0x1fc/0x29c [ 1.515167] __driver_attach+0xa4/0xa8 [ 1.520643] bus_for_each_dev+0x58/0x98 [ 1.526204] driver_attach+0x20/0x28 [ 1.531505] bus_add_driver+0x1c8/0x22c [ 1.537067] driver_register+0x68/0x108 [ 1.542630] i2c_register_driver+0x38/0x7c [ 1.548457] bq27xxx_battery_i2c_driver_init+0x18/0x20 [ 1.555321] do_one_initcall+0x38/0x12c [ 1.560886] kernel_init_freeable+0x148/0x1ec [ 1.566972] kernel_init+0x10/0xfc [ 1.572101] ret_from_fork+0x10/0x40 Also make the same change to ps_get_max_charge_cntl_limit() and ps_get_cur_chrage_cntl_limit() to be safe. Lastly, change the return value of power_supply_get_property() to -EAGAIN from -ENODEV if use_cnt <= 0. Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core") Cc: stable@vger.kernel.org Signed-off-by: Rhyland Klein Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sebastian Reichel --- drivers/power/power_supply_core.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index 456987c88baa..b13cd074c52a 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -565,11 +565,12 @@ static int power_supply_read_temp(struct thermal_zone_device *tzd, WARN_ON(tzd == NULL); psy = tzd->devdata; - ret = psy->desc->get_property(psy, POWER_SUPPLY_PROP_TEMP, &val); + ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_TEMP, &val); + if (ret) + return ret; /* Convert tenths of degree Celsius to milli degree Celsius. */ - if (!ret) - *temp = val.intval * 100; + *temp = val.intval * 100; return ret; } @@ -612,10 +613,12 @@ static int ps_get_max_charge_cntl_limit(struct thermal_cooling_device *tcd, int ret; psy = tcd->devdata; - ret = psy->desc->get_property(psy, - POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, &val); - if (!ret) - *state = val.intval; + ret = power_supply_get_property(psy, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, &val); + if (ret) + return ret; + + *state = val.intval; return ret; } @@ -628,10 +631,12 @@ static int ps_get_cur_chrage_cntl_limit(struct thermal_cooling_device *tcd, int ret; psy = tcd->devdata; - ret = psy->desc->get_property(psy, - POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, &val); - if (!ret) - *state = val.intval; + ret = power_supply_get_property(psy, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, &val); + if (ret) + return ret; + + *state = val.intval; return ret; } -- cgit v1.2.3 From fdecf36fcefa9f48c2f2de21c8176f1a8ce2c960 Mon Sep 17 00:00:00 2001 From: Clemens Gruber Date: Sat, 11 Jun 2016 17:21:26 +0200 Subject: phy: marvell: fix LED configuration via marvell,reg-init Configuring the PHY LED registers for the Marvell 88E1510 and others is not possible, because regardless of the values in marvell,reg-init, it is later overridden in m88e1121_config_aneg with a non-standard default. This patch moves that default configuration to .config_init to allow setting the LED configuration through marvell,reg-init in the device tree, which should override said default if it exists. Signed-off-by: Clemens Gruber Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 38 ++++++++++++++++++++++++++------------ 1 file changed, 26 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 280e8795b463..79ccc11facc3 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -407,15 +407,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev) if (err < 0) return err; - oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); - - phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); - phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF); - phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); - - err = genphy_config_aneg(phydev); - - return err; + return genphy_config_aneg(phydev); } static int m88e1318_config_aneg(struct phy_device *phydev) @@ -636,6 +628,28 @@ static int m88e1111_config_init(struct phy_device *phydev) return phy_write(phydev, MII_BMCR, BMCR_RESET); } +static int m88e1121_config_init(struct phy_device *phydev) +{ + int err, oldpage; + + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); + + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); + if (err < 0) + return err; + + /* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */ + err = phy_write(phydev, MII_88E1121_PHY_LED_CTRL, + MII_88E1121_PHY_LED_DEF); + if (err < 0) + return err; + + phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); + + /* Set marvell,reg-init configuration from device tree */ + return marvell_config_init(phydev); +} + static int m88e1510_config_init(struct phy_device *phydev) { int err; @@ -668,7 +682,7 @@ static int m88e1510_config_init(struct phy_device *phydev) return err; } - return marvell_config_init(phydev); + return m88e1121_config_init(phydev); } static int m88e1118_config_aneg(struct phy_device *phydev) @@ -1196,7 +1210,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, - .config_init = &marvell_config_init, + .config_init = &m88e1121_config_init, .config_aneg = &m88e1121_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, @@ -1215,7 +1229,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, - .config_init = &marvell_config_init, + .config_init = &m88e1121_config_init, .config_aneg = &m88e1318_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, -- cgit v1.2.3 From 881d0327db37ad917a367c77aff1afa1ee41e0a9 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Sun, 12 Jun 2016 17:36:37 +0800 Subject: net: alx: Work around the DMA RX overflow issue Commit 26c5f03 uses a new skb allocator to avoid the RFD overflow issue. But from debugging without datasheet, we found the error always happen when the DMA RX address is set to 0x....fc0, which is very likely to be a HW/silicon problem. So one idea is instead of adding a new allocator, why not just hitting the right target by avaiding the error-prone DMA address? This patch will actually * Remove the commit 26c5f03 * Apply rx skb with 64 bytes longer space, and if the allocated skb has a 0x...fc0 address, it will use skb_resever(skb, 64) to advance the address, so that the RX overflow can be avoided. In theory this method should also apply to atl1c driver, which I can't find anyone who can help to test on real devices. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 Signed-off-by: Feng Tang Suggested-by: Eric Dumazet Tested-by: Ole Lukoie Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/alx/alx.h | 4 --- drivers/net/ethernet/atheros/alx/main.c | 61 ++++++++------------------------- 2 files changed, 14 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/atheros/alx/alx.h b/drivers/net/ethernet/atheros/alx/alx.h index d02c4240b7df..8fc93c5f6abc 100644 --- a/drivers/net/ethernet/atheros/alx/alx.h +++ b/drivers/net/ethernet/atheros/alx/alx.h @@ -96,10 +96,6 @@ struct alx_priv { unsigned int rx_ringsz; unsigned int rxbuf_size; - struct page *rx_page; - unsigned int rx_page_offset; - unsigned int rx_frag_size; - struct napi_struct napi; struct alx_tx_queue txq; struct alx_rx_queue rxq; diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index c98acdc0d14f..e708e360a9e3 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -70,35 +70,6 @@ static void alx_free_txbuf(struct alx_priv *alx, int entry) } } -static struct sk_buff *alx_alloc_skb(struct alx_priv *alx, gfp_t gfp) -{ - struct sk_buff *skb; - struct page *page; - - if (alx->rx_frag_size > PAGE_SIZE) - return __netdev_alloc_skb(alx->dev, alx->rxbuf_size, gfp); - - page = alx->rx_page; - if (!page) { - alx->rx_page = page = alloc_page(gfp); - if (unlikely(!page)) - return NULL; - alx->rx_page_offset = 0; - } - - skb = build_skb(page_address(page) + alx->rx_page_offset, - alx->rx_frag_size); - if (likely(skb)) { - alx->rx_page_offset += alx->rx_frag_size; - if (alx->rx_page_offset >= PAGE_SIZE) - alx->rx_page = NULL; - else - get_page(page); - } - return skb; -} - - static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) { struct alx_rx_queue *rxq = &alx->rxq; @@ -115,9 +86,22 @@ static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) while (!cur_buf->skb && next != rxq->read_idx) { struct alx_rfd *rfd = &rxq->rfd[cur]; - skb = alx_alloc_skb(alx, gfp); + /* + * When DMA RX address is set to something like + * 0x....fc0, it will be very likely to cause DMA + * RFD overflow issue. + * + * To work around it, we apply rx skb with 64 bytes + * longer space, and offset the address whenever + * 0x....fc0 is detected. + */ + skb = __netdev_alloc_skb(alx->dev, alx->rxbuf_size + 64, gfp); if (!skb) break; + + if (((unsigned long)skb->data & 0xfff) == 0xfc0) + skb_reserve(skb, 64); + dma = dma_map_single(&alx->hw.pdev->dev, skb->data, alx->rxbuf_size, DMA_FROM_DEVICE); @@ -153,7 +137,6 @@ static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) alx_write_mem16(&alx->hw, ALX_RFD_PIDX, cur); } - return count; } @@ -622,11 +605,6 @@ static void alx_free_rings(struct alx_priv *alx) kfree(alx->txq.bufs); kfree(alx->rxq.bufs); - if (alx->rx_page) { - put_page(alx->rx_page); - alx->rx_page = NULL; - } - dma_free_coherent(&alx->hw.pdev->dev, alx->descmem.size, alx->descmem.virt, @@ -681,7 +659,6 @@ static int alx_request_irq(struct alx_priv *alx) alx->dev->name, alx); if (!err) goto out; - /* fall back to legacy interrupt */ pci_disable_msi(alx->hw.pdev); } @@ -725,7 +702,6 @@ static int alx_init_sw(struct alx_priv *alx) struct pci_dev *pdev = alx->hw.pdev; struct alx_hw *hw = &alx->hw; int err; - unsigned int head_size; err = alx_identify_hw(alx); if (err) { @@ -741,12 +717,7 @@ static int alx_init_sw(struct alx_priv *alx) hw->smb_timer = 400; hw->mtu = alx->dev->mtu; - alx->rxbuf_size = ALX_MAX_FRAME_LEN(hw->mtu); - head_size = SKB_DATA_ALIGN(alx->rxbuf_size + NET_SKB_PAD) + - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); - alx->rx_frag_size = roundup_pow_of_two(head_size); - alx->tx_ringsz = 256; alx->rx_ringsz = 512; hw->imt = 200; @@ -848,7 +819,6 @@ static int alx_change_mtu(struct net_device *netdev, int mtu) { struct alx_priv *alx = netdev_priv(netdev); int max_frame = ALX_MAX_FRAME_LEN(mtu); - unsigned int head_size; if ((max_frame < ALX_MIN_FRAME_SIZE) || (max_frame > ALX_MAX_FRAME_SIZE)) @@ -860,9 +830,6 @@ static int alx_change_mtu(struct net_device *netdev, int mtu) netdev->mtu = mtu; alx->hw.mtu = mtu; alx->rxbuf_size = max(max_frame, ALX_DEF_RXBUF_SIZE); - head_size = SKB_DATA_ALIGN(alx->rxbuf_size + NET_SKB_PAD) + - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); - alx->rx_frag_size = roundup_pow_of_two(head_size); netdev_update_features(netdev); if (netif_running(netdev)) alx_reinit(alx); -- cgit v1.2.3 From 969a132723434f3723cc0606373785d19c1d2f05 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 14 Jun 2016 15:13:05 -0500 Subject: usb: musb: sunxi: Fix NULL ptr deref when gadget is registered before musb Stop using the return value of platform_device_register_full() to get to the struct musb in sunxi_musb_work(). If a gadget has been registered (insmod-ed) before the musb driver, then musb_start will get called from the musb_core probe function and sunxi_musb_work() may run before platform_device_register_full() has returned. Instead store a pointer to struct musb in struct sunxi_glue when sunxi_musb_enable gets called. Note that sunxi_musb_enable always gets called before sunxi_musb_work() can run. Signed-off-by: Hans de Goede [b-liu@ti.com: revise subject prefix] Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/sunxi.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index e7d46179b485..dc49041498a3 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -80,7 +80,8 @@ static struct musb *sunxi_musb; struct sunxi_glue { struct device *dev; - struct platform_device *musb; + struct musb *musb; + struct platform_device *musb_pdev; struct clk *clk; struct reset_control *rst; struct phy *phy; @@ -102,7 +103,7 @@ static void sunxi_musb_work(struct work_struct *work) return; if (test_and_clear_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags)) { - struct musb *musb = platform_get_drvdata(glue->musb); + struct musb *musb = glue->musb; unsigned long flags; u8 devctl; @@ -337,6 +338,8 @@ static void sunxi_musb_enable(struct musb *musb) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + glue->musb = musb; + /* musb_core does not call us in a balanced manner */ if (test_and_set_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) return; @@ -732,9 +735,9 @@ static int sunxi_musb_probe(struct platform_device *pdev) pinfo.data = &pdata; pinfo.size_data = sizeof(pdata); - glue->musb = platform_device_register_full(&pinfo); - if (IS_ERR(glue->musb)) { - ret = PTR_ERR(glue->musb); + glue->musb_pdev = platform_device_register_full(&pinfo); + if (IS_ERR(glue->musb_pdev)) { + ret = PTR_ERR(glue->musb_pdev); dev_err(&pdev->dev, "Error registering musb dev: %d\n", ret); goto err_unregister_usb_phy; } @@ -751,7 +754,7 @@ static int sunxi_musb_remove(struct platform_device *pdev) struct sunxi_glue *glue = platform_get_drvdata(pdev); struct platform_device *usb_phy = glue->usb_phy; - platform_device_unregister(glue->musb); /* Frees glue ! */ + platform_device_unregister(glue->musb_pdev); /* Frees glue ! */ usb_phy_generic_unregister(usb_phy); return 0; -- cgit v1.2.3 From 1c4bf5ac6a16d9321b51e91acef481b090e5486b Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 14 Jun 2016 15:13:06 -0500 Subject: usb: musb: sunxi: Remove bogus "Frees glue" comment The comment is wrong, glue is devm_kzalloc-ed mem attached to the "allwinner,sun4i-a10-musb" compatible platform-dev. Where as glue->musb_pdev is a newly created "musb-hdrc" platform-dev. Signed-off-by: Hans de Goede [b-liu@ti.com: revise subject prefix] Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/sunxi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index dc49041498a3..76500515dd8b 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -754,7 +754,7 @@ static int sunxi_musb_remove(struct platform_device *pdev) struct sunxi_glue *glue = platform_get_drvdata(pdev); struct platform_device *usb_phy = glue->usb_phy; - platform_device_unregister(glue->musb_pdev); /* Frees glue ! */ + platform_device_unregister(glue->musb_pdev); usb_phy_generic_unregister(usb_phy); return 0; -- cgit v1.2.3 From 476490a945e1f0f6bd58e303058d2d8ca93a974c Mon Sep 17 00:00:00 2001 From: Lyude Date: Tue, 14 Jun 2016 11:04:09 -0400 Subject: drm/i915/ilk: Don't disable SSC source if it's in use MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Thanks to Ville Syrjälä for pointing me towards the cause of this issue. Unfortunately one of the sideaffects of having the refclk for a DPLL set to SSC is that as long as it's set to SSC, the GPU will prevent us from powering down any of the pipes or transcoders using it. A couple of BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL configurations. This causes issues on the first modeset, since we don't expect SSC to be left on and as a result, can't successfully power down the pipes or the transcoders using it. Here's an example from this Dell OptiPlex 990: [drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled [drm:intel_modeset_init] 2 display pipes available. [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm:intel_crt_reset] crt adpa set to 0xf40000 [drm:intel_dp_init_connector] Adding DP connector on port C [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1 [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0 [drm:ironlake_init_pch_refclk] Disabling SSC entirely … later we try committing the first modeset … [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A [drm:intel_dump_pipe_config] cpu_transcoder: A … [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07 [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [drm:intel_dump_pipe_config] FB:42, fb = 800x600 format = 0x34325258 [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600 [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A [drm:intel_disable_pipe] disabling pipe A ------------[ cut here ]------------ WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915] pipe_off wait timed out … ---[ end trace 94fc8aa03ae139e8 ]--- [drm:intel_dp_link_down] [drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A Later modesets succeed since they reset the DPLL's configuration anyway, but this is enough to get stuck with a big fat warning in dmesg. A better solution would be to add refcounts for the SSC source, but for now leaving the source clock on should suffice. Changes since v4: - Fix calculation of final for systems with LVDS panels (fixes BUG() on CI test suite) Changes since v3: - Move temp variable into loop - Move checks for using_ssc_source to after we've figured out has_ck505 - Add using_ssc_source to debug output Changes since v2: - Fix debug output for when we disable the CPU source Changes since v1: - Leave the SSC source clock on instead of just shutting it off on all of the DPLL configurations. Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä Signed-off-by: Lyude Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1465916649-10228-1-git-send-email-cpaul@redhat.com Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 48 +++++++++++++++++++++++++----------- 1 file changed, 34 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 718f56525b96..56a1637c864f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8275,12 +8275,14 @@ static void ironlake_init_pch_refclk(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_encoder *encoder; + int i; u32 val, final; bool has_lvds = false; bool has_cpu_edp = false; bool has_panel = false; bool has_ck505 = false; bool can_ssc = false; + bool using_ssc_source = false; /* We need to take the global config into account */ for_each_intel_encoder(dev, encoder) { @@ -8307,8 +8309,22 @@ static void ironlake_init_pch_refclk(struct drm_device *dev) can_ssc = true; } - DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n", - has_panel, has_lvds, has_ck505); + /* Check if any DPLLs are using the SSC source */ + for (i = 0; i < dev_priv->num_shared_dpll; i++) { + u32 temp = I915_READ(PCH_DPLL(i)); + + if (!(temp & DPLL_VCO_ENABLE)) + continue; + + if ((temp & PLL_REF_INPUT_MASK) == + PLLB_REF_INPUT_SPREADSPECTRUMIN) { + using_ssc_source = true; + break; + } + } + + DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d using_ssc_source %d\n", + has_panel, has_lvds, has_ck505, using_ssc_source); /* Ironlake: try to setup display ref clock before DPLL * enabling. This is only under driver's control after @@ -8345,9 +8361,9 @@ static void ironlake_init_pch_refclk(struct drm_device *dev) final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; } else final |= DREF_CPU_SOURCE_OUTPUT_DISABLE; - } else { - final |= DREF_SSC_SOURCE_DISABLE; - final |= DREF_CPU_SOURCE_OUTPUT_DISABLE; + } else if (using_ssc_source) { + final |= DREF_SSC_SOURCE_ENABLE; + final |= DREF_SSC1_ENABLE; } if (final == val) @@ -8393,7 +8409,7 @@ static void ironlake_init_pch_refclk(struct drm_device *dev) POSTING_READ(PCH_DREF_CONTROL); udelay(200); } else { - DRM_DEBUG_KMS("Disabling SSC entirely\n"); + DRM_DEBUG_KMS("Disabling CPU source output\n"); val &= ~DREF_CPU_SOURCE_OUTPUT_MASK; @@ -8404,16 +8420,20 @@ static void ironlake_init_pch_refclk(struct drm_device *dev) POSTING_READ(PCH_DREF_CONTROL); udelay(200); - /* Turn off the SSC source */ - val &= ~DREF_SSC_SOURCE_MASK; - val |= DREF_SSC_SOURCE_DISABLE; + if (!using_ssc_source) { + DRM_DEBUG_KMS("Disabling SSC source\n"); - /* Turn off SSC1 */ - val &= ~DREF_SSC1_ENABLE; + /* Turn off the SSC source */ + val &= ~DREF_SSC_SOURCE_MASK; + val |= DREF_SSC_SOURCE_DISABLE; - I915_WRITE(PCH_DREF_CONTROL, val); - POSTING_READ(PCH_DREF_CONTROL); - udelay(200); + /* Turn off SSC1 */ + val &= ~DREF_SSC1_ENABLE; + + I915_WRITE(PCH_DREF_CONTROL, val); + POSTING_READ(PCH_DREF_CONTROL); + udelay(200); + } } BUG_ON(val != final); -- cgit v1.2.3 From b00345d1994d588fa2687e1238fcd542f0320cba Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 14 Jun 2016 23:12:59 -0700 Subject: cpufreq: intel_pstate: Adjust _PSS[0] freqeuency if needed The maximum turbo P-State used by the intel_pstate driver may be limited by ACPI _PSS table entry 0. After commit 9522a2ff9cde (cpufreq: intel_pstate: Enforce _PPC limits), the maximum performance on servers will be capped by the _PSS table entry 0 by default. Even though that is formally correct, it may lead to preformance regressions in some cases. Namely, if the _PSS table entry 0 is not the maximum turbo P-State, performance measured after commit 9522a2ff9cde will not match the performance measured before that commit on the same system. For this reason, modify the code to always use the maximum turbo frequency as the one that corresponds to _PSS table entry 0 if turbo is enabled in the BIOS. This way, the performance levels from before commit 9522a2ff9cde will be restored on the affected systems. Fixes: 9522a2ff9cde (cpufreq: intel_pstate: Enforce _PPC limits) Suggested-by: Rafael J. Wysocki Signed-off-by: Srinivas Pandruvada [ rjw : Changelog ] Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 22 ++-------------------- 1 file changed, 2 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index ee367e9b7d2e..fe9dc17ea873 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -372,26 +372,9 @@ static bool intel_pstate_get_ppc_enable_status(void) return acpi_ppc; } -/* - * The max target pstate ratio is a 8 bit value in both PLATFORM_INFO MSR and - * in TURBO_RATIO_LIMIT MSR, which pstate driver stores in max_pstate and - * max_turbo_pstate fields. The PERF_CTL MSR contains 16 bit value for P state - * ratio, out of it only high 8 bits are used. For example 0x1700 is setting - * target ratio 0x17. The _PSS control value stores in a format which can be - * directly written to PERF_CTL MSR. But in intel_pstate driver this shift - * occurs during write to PERF_CTL (E.g. for cores core_set_pstate()). - * This function converts the _PSS control value to intel pstate driver format - * for comparison and assignment. - */ -static int convert_to_native_pstate_format(struct cpudata *cpu, int index) -{ - return cpu->acpi_perf_data.states[index].control >> 8; -} - static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy) { struct cpudata *cpu; - int turbo_pss_ctl; int ret; int i; @@ -441,11 +424,10 @@ static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy) * max frequency, which will cause a reduced performance as * this driver uses real max turbo frequency as the max * frequency. So correct this frequency in _PSS table to - * correct max turbo frequency based on the turbo ratio. + * correct max turbo frequency based on the turbo state. * Also need to convert to MHz as _PSS freq is in MHz. */ - turbo_pss_ctl = convert_to_native_pstate_format(cpu, 0); - if (turbo_pss_ctl > cpu->pstate.max_pstate) + if (!limits->turbo_disabled) cpu->acpi_perf_data.states[0].core_frequency = policy->cpuinfo.max_freq / 1000; cpu->valid_pss_table = true; -- cgit v1.2.3 From da4e792550a856e2f66aa8183d408553f7513a86 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 15 Jun 2016 02:16:13 +0200 Subject: Revert "ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()" Revert commit 66b1ed5aa8dd "ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()" that is reported to break suspend-to-RAM (ACPI S3) on one system. The root cause of the failure is a wrong access width value for one of the involved registers provided by the ACPI tables, but before commit 66b1ed5aa8dd that value was not taken into account at all and things worked. Fixes: 66b1ed5aa8dd "ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()" Reported-by: Andrey Skvortsov Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/hwregs.c | 146 +++---------------------------------------- 1 file changed, 9 insertions(+), 137 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index daceb80022b0..3b7fb99362b6 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -306,12 +306,6 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) { u64 address; - u8 access_width; - u32 bit_width; - u8 bit_offset; - u64 value64; - u32 new_value32, old_value32; - u8 index; acpi_status status; ACPI_FUNCTION_NAME(hw_write); @@ -323,145 +317,23 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) return (status); } - /* Convert access_width into number of bits based */ - - access_width = acpi_hw_get_access_bit_width(reg, 32); - bit_width = reg->bit_offset + reg->bit_width; - bit_offset = reg->bit_offset; - /* * Two address spaces supported: Memory or IO. PCI_Config is * not supported here because the GAS structure is insufficient */ - index = 0; - while (bit_width) { - /* - * Use offset style bit reads because "Index * AccessWidth" is - * ensured to be less than 32-bits by acpi_hw_validate_register(). - */ - new_value32 = ACPI_GET_BITS(&value, index * access_width, - ACPI_MASK_BITS_ABOVE_32 - (access_width)); - - if (bit_offset >= access_width) { - bit_offset -= access_width; - } else { - /* - * Use offset style bit masks because access_width is ensured - * to be less than 32-bits by acpi_hw_validate_register() and - * bit_offset/bit_width is less than access_width here. - */ - if (bit_offset) { - new_value32 &= ACPI_MASK_BITS_BELOW(bit_offset); - } - if (bit_width < access_width) { - new_value32 &= ACPI_MASK_BITS_ABOVE(bit_width); - } - - if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { - if (bit_offset || bit_width < access_width) { - /* - * Read old values in order not to modify the bits that - * are beyond the register bit_width/bit_offset setting. - */ - status = - acpi_os_read_memory((acpi_physical_address) - address + - index * - ACPI_DIV_8 - (access_width), - &value64, - access_width); - old_value32 = (u32)value64; - - /* - * Use offset style bit masks because access_width is - * ensured to be less than 32-bits by - * acpi_hw_validate_register() and bit_offset/bit_width is - * less than access_width here. - */ - if (bit_offset) { - old_value32 &= - ACPI_MASK_BITS_ABOVE - (bit_offset); - bit_offset = 0; - } - if (bit_width < access_width) { - old_value32 &= - ACPI_MASK_BITS_BELOW - (bit_width); - } - - new_value32 |= old_value32; - } - - value64 = (u64)new_value32; - status = - acpi_os_write_memory((acpi_physical_address) - address + - index * - ACPI_DIV_8 - (access_width), - value64, access_width); - } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - - if (bit_offset || bit_width < access_width) { - /* - * Read old values in order not to modify the bits that - * are beyond the register bit_width/bit_offset setting. - */ - status = - acpi_hw_read_port((acpi_io_address) - address + - index * - ACPI_DIV_8 - (access_width), - &old_value32, - access_width); - - /* - * Use offset style bit masks because access_width is - * ensured to be less than 32-bits by - * acpi_hw_validate_register() and bit_offset/bit_width is - * less than access_width here. - */ - if (bit_offset) { - old_value32 &= - ACPI_MASK_BITS_ABOVE - (bit_offset); - bit_offset = 0; - } - if (bit_width < access_width) { - old_value32 &= - ACPI_MASK_BITS_BELOW - (bit_width); - } - - new_value32 |= old_value32; - } - - status = acpi_hw_write_port((acpi_io_address) - address + - index * - ACPI_DIV_8 - (access_width), - new_value32, - access_width); - } - } - - /* - * Index * access_width is ensured to be less than 32-bits by - * acpi_hw_validate_register(). - */ - bit_width -= - bit_width > access_width ? access_width : bit_width; - index++; + if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { + status = acpi_os_write_memory((acpi_physical_address) + address, (u64)value, + reg->bit_width); + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ + + status = acpi_hw_write_port((acpi_io_address) + address, value, reg->bit_width); } ACPI_DEBUG_PRINT((ACPI_DB_IO, "Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n", - value, access_width, ACPI_FORMAT_UINT64(address), + value, reg->bit_width, ACPI_FORMAT_UINT64(address), acpi_ut_get_region_name(reg->space_id))); return (status); -- cgit v1.2.3 From fffc5f59f2c68ca859c3f92b224393ed3adbe1ca Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 2 Jun 2016 19:27:51 +0200 Subject: drm/crtc: fix connector reference counting mismatch in drm_crtc_helper_set_config Since commit 0955c1250e96 ("drm/crtc: take references to connectors used in a modeset. (v2)"), the reference counts of all connectors in the drm_mode_set given to drm_crtc_helper_set_config are incremented, and then the reference counts of all connectors are decremented on success, but in a temporary copy of the connector structure. This leads to the following error after the first modeset on imx-drm: Unable to handle kernel NULL pointer dereference at virtual address 00000004 pgd = ad8c4000 [00000004] *pgd=3d9c5831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 190 Comm: kmsfb-manage Not tainted 4.7.0-rc1+ #657 Hardware name: Freescale i.MX6 Quad/DualLit: [<80506098>] lr : [<80252e94>] psr: 200c0013 sp : adca7ca8 ip : adca7b90 fp : adca7cd4 r10: 00000000 r9 : 00000100 r8 : 00000200 r7 : af3c9800 r6 : aded7848 r5 : aded7800 r4 : 00000000 r3 : af3ca058 r2 : 00000200 r1 : af3ca058 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 3d8c404a DAC: 00000051 Process kmsfb-manage (pid: 190, stack limit = 0xadca6210) Stack: (0xadca7ca8 to 0xadca8000) 7ca0: 805190e0 aded7800 aded7820 80501a88 8155a290 af3c9c6c 7cc0: adca7ddc 0000000f adca7cec adca7cd8 80519104 80506044 805190e0 aded7800 7ce0: adca7d04 adca7cf0 80501ac0 805190ec aded7820 aded7814 adca7d24 adca7d08 7d00: 804fdb80 80501a94 aded7800 af3ca010 aded7afc af3c9c60 adca7d94 adca7d28 7d20: 804e3518 804fdb20 00000000 af3c9b1c adca7d50 81506f44 00000000 8093c500 7d40: af3c9c6c ae4f2ca8 ae4f2c18 00000000 00000000 ae637f00 00000000 aded7800 7d60: 00000001 af3c9800 af23c300 ae77fcc0 ae4f2c18 00000001 af3c9800 8155a290 7d80: af1af700 adca6000 adca7db4 adca7d98 804fea6c 804e2de4 adca7e50 adb3d940 7da0: 00000001 af3c9800 adca7e24 adca7db8 8050440c 804fea0c ae77fcc0 00000003 7dc0: adca7e24 adb3d940 af1af700 ae77fcc0 ae77fccc ae4f2c18 8083d44c ae77fcc0 7de0: ae4002 80d03040 adca7e64 adca7e40 adca7e50 80503f08 7e40: 7ebd5630 adca7e50 00000068 c06864a2 7ebd5be8 00000000 00000001 00000018 7e60: 00000026 00000000 00000000 00000000 00000001 000115bc 05010500 05a0059f 7e80: 03200000 03360321 00000337 0000003c 00000000 00000040 30383231 30303878 7ea0: 00000000 00000000 00000000 00000000 00000000 00000000 80173058 80172e30 7ec0: 80d77d32 00004000 adf7d900 00000003 00000000 7ebd5630 af342bb0 adfe3b80 7ee0: 80272f50 00000003 adca6000 00000000 adca7f7c adca7f00 802725ec 804f52cc 7f00: 802809cc 80178450 00000000 00000000 80280880 80145904 adb3d8c0 adf7d990 7f20: ffffffff 00000003 00004000 01614c10 c06864a2 00000003 adca6000 00000000 7f40: adca7f6c adca7f50 80280b04 8028088c 000115bc adfe3b81 7ebd5630 adfe3b80 7f60: c06864a2 00000003 adca6000 00000000 adca7fa4 adca7f80 80272f50 80272548 7f80: 000115bc 00017050 00000001 01614c10 00000036 801089e4 00000000 adca7fa8 7fa0: 80108840 80272f18 00017050 00000001 00000003 c06864a2 7ebd5630 000115bc 7fc0: 00017050 00000001 01614c10 00000036 00000003 00000000 00000026 00000018 7fe0: 00016f38 7ebd562c 0000b5e9 76ef31e6 400c0030 00000003 ff5f37db bfe7dd4d Backtrace: [<80506038>] (drm_connector_cleanup) from [<80519104>] (dw_hdmi_connector_destroy+0x24/0x28) r10:0000000f r9:adca7ddc r8:af3c9c6c r7:8155a290 r6:80501a88 r5:aded7820 r4:aded7800 r3:805190e0 [<805190e0>] (dw_hdmi_connector_destroy) from [<80501ac0>] (drm_connector_free+0x38/0x3c) r4:aded7800 nreference) from [<804e3518>] (drm_crtc_helper_set_config+0x740/0xbf4) r6:af3c9c60 r5:aded7afc r4:af3ca010 r3:aded7800 [<804e2dd8>] (drm_crtc_helper_set_config) from [<804fea6c>] (drm_mode_set_config_internal+0x6c/0xf4) r10:adca6000 r9:af1af700 r8:8155a290 r7:af3c9800 r6:00000001 r5:ae4f2c18 r4:ae77fcc0 [<804fea00>] (drm_mode_set_config_internal) from [<8050440c>] (drm_mode_setcrtc+0x504/0x57c) r7:af3c9800 r6:00000001 r5:adb3d940 r4:adca7e50 [<80503f08>] (drm_mode_setcrtc) from [<804f5404>] (drm_ioctl+0x144/0x4dc) r10:ada2e000 r9:000000a2 r8:af3c9800 r7:8155a290 r6:809320b4 r5:00000051 r4:adca7e50 [<804f52c0>] (drm_ioctl) from [<802725ec>] (do_vfs_ioctl+0xb0/0x9d0) r10:00000000 r9:adca6000 r8:00000003 r7:80272f50 r6:adfe3b80 r5:af342bb0 r4:7ebd5630 [<8027253c>] (do_vfs_ioctl) from [<80272f50>] (SyS_ioctl+0x44/0x6c) r10:00000000 r9:adca6000 r8:00000003 r7:c06864a2 r6:adfe3b80 r5:7ebd5630 r4:adfe3b81 [<80272f0c>] (SyS_ioctl) from [<80108840>] (ret_fast_syscall+0x0/0x1c) r8:801089e4 r7:00000036 r6:01614c10 r5:00000001 r4:00017050 r3:000115bc Code: 0a00000c e5932004 e1a01003 e1a0a004 (e5842004) ---[ end trace 9a7257572ccacb16 ]--- Only the reference count of connectors that weren't previously bound to an encoder should be incremented after a call to drm_crtc_helper_set_config. And only the reference count of connectors that were previously bound to an encoder and are unbound afterwards should ever be decremented. The reference counts of the temporary copies in the save_connectors should not be touched at all. This patch fixes the above error by only incrementing the reference count of those connectors in the set that are initially not bound to any encoder, and also by restoring the reference count of only those connectors in the set in the failure case. "Note that this can only be hit when fbdev emulation is disabled, since then the refcount drops from 1 to 0 and we call the connector destroy functions on the backup copy, which eventually results in tears. With fbdev emulation the refcount only goes down from 2 to 1 ever. And since we unconditionally increment the refcount on the real object, the refcount of that will slowly increase. The backup connector's refcount doesn't matter, since we kfree() that either way in the end of drm_crtc_helper_set_config()." Fixes: 0955c1250e96 ("drm/crtc: take references to connectors used in a modeset. (v2)") Signed-off-by: Philipp Zabel Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index a6e42433ef0e..1c4d6746f90c 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -631,8 +631,12 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) mode_changed = true; } - /* take a reference on all connectors in set */ + /* take a reference on all unbound connectors in set, reuse the + * already taken reference for bound connectors + */ for (ro = 0; ro < set->num_connectors; ro++) { + if (set->connectors[ro]->encoder) + continue; drm_connector_reference(set->connectors[ro]); } @@ -754,12 +758,6 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) } } - /* after fail drop reference on all connectors in save set */ - count = 0; - drm_for_each_connector(connector, dev) { - drm_connector_unreference(&save_connectors[count++]); - } - kfree(save_connectors); kfree(save_encoders); return 0; @@ -776,8 +774,12 @@ fail: *connector = save_connectors[count++]; } - /* after fail drop reference on all connectors in set */ + /* after fail drop reference on all unbound connectors in set, let + * bound connectors keep their reference + */ for (ro = 0; ro < set->num_connectors; ro++) { + if (set->connectors[ro]->encoder) + continue; drm_connector_unreference(set->connectors[ro]); } -- cgit v1.2.3 From 93f55972bc0fef0e394bbed3d46dc06b9afd3d17 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 2 Jun 2016 19:27:52 +0200 Subject: drm/crtc: only store the necessary data for set_config rollback drm_crtc_helper_set_config only potentially touches connector->encoder and encoder->crtc, so we only have to store those for all connectors and encoders, respectively. Suggested-by: Daniel Vetter Signed-off-by: Philipp Zabel Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 1c4d6746f90c..26feb2f8453f 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -528,11 +528,11 @@ drm_crtc_helper_disable(struct drm_crtc *crtc) int drm_crtc_helper_set_config(struct drm_mode_set *set) { struct drm_device *dev; - struct drm_crtc *new_crtc; - struct drm_encoder *save_encoders, *new_encoder, *encoder; + struct drm_crtc **save_encoder_crtcs, *new_crtc; + struct drm_encoder **save_connector_encoders, *new_encoder, *encoder; bool mode_changed = false; /* if true do a full mode set */ bool fb_changed = false; /* if true and !mode_changed just do a flip */ - struct drm_connector *save_connectors, *connector; + struct drm_connector *connector; int count = 0, ro, fail = 0; const struct drm_crtc_helper_funcs *crtc_funcs; struct drm_mode_set save_set; @@ -574,15 +574,15 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) * Allocate space for the backup of all (non-pointer) encoder and * connector data. */ - save_encoders = kzalloc(dev->mode_config.num_encoder * - sizeof(struct drm_encoder), GFP_KERNEL); - if (!save_encoders) + save_encoder_crtcs = kzalloc(dev->mode_config.num_encoder * + sizeof(struct drm_crtc *), GFP_KERNEL); + if (!save_encoder_crtcs) return -ENOMEM; - save_connectors = kzalloc(dev->mode_config.num_connector * - sizeof(struct drm_connector), GFP_KERNEL); - if (!save_connectors) { - kfree(save_encoders); + save_connector_encoders = kzalloc(dev->mode_config.num_connector * + sizeof(struct drm_encoder *), GFP_KERNEL); + if (!save_connector_encoders) { + kfree(save_encoder_crtcs); return -ENOMEM; } @@ -593,12 +593,12 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) */ count = 0; drm_for_each_encoder(encoder, dev) { - save_encoders[count++] = *encoder; + save_encoder_crtcs[count++] = encoder->crtc; } count = 0; drm_for_each_connector(connector, dev) { - save_connectors[count++] = *connector; + save_connector_encoders[count++] = connector->encoder; } save_set.crtc = set->crtc; @@ -758,20 +758,20 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) } } - kfree(save_connectors); - kfree(save_encoders); + kfree(save_connector_encoders); + kfree(save_encoder_crtcs); return 0; fail: /* Restore all previous data. */ count = 0; drm_for_each_encoder(encoder, dev) { - *encoder = save_encoders[count++]; + encoder->crtc = save_encoder_crtcs[count++]; } count = 0; drm_for_each_connector(connector, dev) { - *connector = save_connectors[count++]; + connector->encoder = save_connector_encoders[count++]; } /* after fail drop reference on all unbound connectors in set, let @@ -789,8 +789,8 @@ fail: save_set.y, save_set.fb)) DRM_ERROR("failed to restore config after modeset failure\n"); - kfree(save_connectors); - kfree(save_encoders); + kfree(save_connector_encoders); + kfree(save_encoder_crtcs); return ret; } EXPORT_SYMBOL(drm_crtc_helper_set_config); -- cgit v1.2.3 From fd2d2bac6e79b0be91ab86a6075a0c46ffda658a Mon Sep 17 00:00:00 2001 From: Andrey Grodzovsky Date: Wed, 25 May 2016 16:45:43 -0400 Subject: drm/dp/mst: Always clear proposed vcpi table for port. Not clearing mst manager's proposed vcpis table for destroyed connectors when the manager is stopped leaves it pointing to unrefernced memory, this causes pagefault when the manager is restarted when plugging back a branch. Fixes: 91a25e463130 ("drm/dp/mst: deallocate payload on port destruction") Signed-off-by: Andrey Grodzovsky Reviewed-by: Lyude Cc: stable@vger.kernel.org Cc: Mykola Lysenko Cc: Alex Deucher --- drivers/gpu/drm/drm_dp_mst_topology.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index a13edf5de2d6..6537908050d7 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -2927,11 +2927,9 @@ static void drm_dp_destroy_connector_work(struct work_struct *work) drm_dp_port_teardown_pdt(port, port->pdt); if (!port->input && port->vcpi.vcpi > 0) { - if (mgr->mst_state) { - drm_dp_mst_reset_vcpi_slots(mgr, port); - drm_dp_update_payload_part1(mgr); - drm_dp_mst_put_payload_id(mgr, port->vcpi.vcpi); - } + drm_dp_mst_reset_vcpi_slots(mgr, port); + drm_dp_update_payload_part1(mgr); + drm_dp_mst_put_payload_id(mgr, port->vcpi.vcpi); } kref_put(&port->kref, drm_dp_free_mst_port); -- cgit v1.2.3 From 8beb330044d0d1878c7b92290e91c0b889e92633 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Mon, 13 Jun 2016 22:00:07 -0700 Subject: 53c700: fix BUG on untagged commands The untagged command case in the 53c700 driver has been broken since host wide tags were enabled because the replaced scsi_find_tag() function had a special case for the tag value SCSI_NO_TAG to retrieve sdev->current_cmnd. The replacement function scsi_host_find_tag() has no such special case and returns NULL causing untagged commands to trigger a BUG() in the driver. Inspection shows that the 53c700 is the only driver using this SCSI_NO_TAG case, so a local fix in the driver suffices to fix this problem globally. Fixes: 64d513ac31b - "scsi: use host wide tags by default" Cc: stable@vger.kernel.org # 4.4+ Reported-by: Helge Deller Tested-by: Helge Deller Signed-off-by: James Bottomley Reviewed-by: Johannes Thumshirn Reviewed-by: Ewan D. Milne Acked-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/53c700.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c index d4c285688ce9..3ddc85e6efd6 100644 --- a/drivers/scsi/53c700.c +++ b/drivers/scsi/53c700.c @@ -1122,7 +1122,7 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp, } else { struct scsi_cmnd *SCp; - SCp = scsi_host_find_tag(SDp->host, SCSI_NO_TAG); + SCp = SDp->current_cmnd; if(unlikely(SCp == NULL)) { sdev_printk(KERN_ERR, SDp, "no saved request for untagged cmd\n"); @@ -1826,7 +1826,7 @@ NCR_700_queuecommand_lck(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *) slot->tag, slot); } else { slot->tag = SCSI_NO_TAG; - /* must populate current_cmnd for scsi_host_find_tag to work */ + /* save current command for reselection */ SCp->device->current_cmnd = SCp; } /* sanity check: some of the commands generated by the mid-layer -- cgit v1.2.3 From 106da663ff495e0aea3ac15b8317aa410754fcac Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 13 Jun 2016 10:31:04 +0200 Subject: ovs/gre,geneve: fix error path when creating an iface After ipgre_newlink()/geneve_configure() call, the netdev is registered. Fixes: 7e059158d57b ("vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices") CC: David Wragg Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/geneve.c | 10 +++++++--- net/ipv4/ip_gre.c | 10 +++++++--- 2 files changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index cadefe4fdaa2..086c2dae4c3d 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1508,6 +1508,7 @@ struct net_device *geneve_dev_create_fb(struct net *net, const char *name, { struct nlattr *tb[IFLA_MAX + 1]; struct net_device *dev; + LIST_HEAD(list_kill); int err; memset(tb, 0, sizeof(tb)); @@ -1519,8 +1520,10 @@ struct net_device *geneve_dev_create_fb(struct net *net, const char *name, err = geneve_configure(net, dev, &geneve_remote_unspec, 0, 0, 0, 0, htons(dst_port), true, GENEVE_F_UDP_ZERO_CSUM6_RX); - if (err) - goto err; + if (err) { + free_netdev(dev); + return ERR_PTR(err); + } /* openvswitch users expect packet sizes to be unrestricted, * so set the largest MTU we can. @@ -1532,7 +1535,8 @@ struct net_device *geneve_dev_create_fb(struct net *net, const char *name, return dev; err: - free_netdev(dev); + geneve_dellink(dev, &list_kill); + unregister_netdevice_many(&list_kill); return ERR_PTR(err); } EXPORT_SYMBOL_GPL(geneve_dev_create_fb); diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 4d2025f7ec57..08deba679c8c 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -1121,6 +1121,7 @@ struct net_device *gretap_fb_dev_create(struct net *net, const char *name, { struct nlattr *tb[IFLA_MAX + 1]; struct net_device *dev; + LIST_HEAD(list_kill); struct ip_tunnel *t; int err; @@ -1136,8 +1137,10 @@ struct net_device *gretap_fb_dev_create(struct net *net, const char *name, t->collect_md = true; err = ipgre_newlink(net, dev, tb, NULL); - if (err < 0) - goto out; + if (err < 0) { + free_netdev(dev); + return ERR_PTR(err); + } /* openvswitch users expect packet sizes to be unrestricted, * so set the largest MTU we can. @@ -1148,7 +1151,8 @@ struct net_device *gretap_fb_dev_create(struct net *net, const char *name, return dev; out: - free_netdev(dev); + ip_tunnel_dellink(dev, &list_kill); + unregister_netdevice_many(&list_kill); return ERR_PTR(err); } EXPORT_SYMBOL_GPL(gretap_fb_dev_create); -- cgit v1.2.3 From cf5da330bbdd0c06b05c525a3d1d58ccd82c87a6 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 13 Jun 2016 10:31:05 +0200 Subject: ovs/vxlan: fix rtnl notifications on iface deletion The function vxlan_dev_create() (only used by ovs) never calls rtnl_configure_link(). The consequence is that dev->rtnl_link_state is never set to RTNL_LINK_INITIALIZED. During the deletion phase, the function rollback_registered_many() sends a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED. Note that the function vxlan_dev_create() is moved after the rtnl stuff so that vxlan_dellink() can be called in this function. Fixes: dcc38c033b32 ("openvswitch: Re-add CONFIG_OPENVSWITCH_VXLAN") CC: Thomas Graf CC: Pravin B Shelar Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 58 +++++++++++++++++++++++++++++++---------------------- 1 file changed, 34 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index f999db2f97b4..b3b9db68f758 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2952,30 +2952,6 @@ static int vxlan_dev_configure(struct net *src_net, struct net_device *dev, return 0; } -struct net_device *vxlan_dev_create(struct net *net, const char *name, - u8 name_assign_type, struct vxlan_config *conf) -{ - struct nlattr *tb[IFLA_MAX+1]; - struct net_device *dev; - int err; - - memset(&tb, 0, sizeof(tb)); - - dev = rtnl_create_link(net, name, name_assign_type, - &vxlan_link_ops, tb); - if (IS_ERR(dev)) - return dev; - - err = vxlan_dev_configure(net, dev, conf); - if (err < 0) { - free_netdev(dev); - return ERR_PTR(err); - } - - return dev; -} -EXPORT_SYMBOL_GPL(vxlan_dev_create); - static int vxlan_newlink(struct net *src_net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { @@ -3268,6 +3244,40 @@ static struct rtnl_link_ops vxlan_link_ops __read_mostly = { .get_link_net = vxlan_get_link_net, }; +struct net_device *vxlan_dev_create(struct net *net, const char *name, + u8 name_assign_type, + struct vxlan_config *conf) +{ + struct nlattr *tb[IFLA_MAX + 1]; + struct net_device *dev; + int err; + + memset(&tb, 0, sizeof(tb)); + + dev = rtnl_create_link(net, name, name_assign_type, + &vxlan_link_ops, tb); + if (IS_ERR(dev)) + return dev; + + err = vxlan_dev_configure(net, dev, conf); + if (err < 0) { + free_netdev(dev); + return ERR_PTR(err); + } + + err = rtnl_configure_link(dev, NULL); + if (err < 0) { + LIST_HEAD(list_kill); + + vxlan_dellink(dev, &list_kill); + unregister_netdevice_many(&list_kill); + return ERR_PTR(err); + } + + return dev; +} +EXPORT_SYMBOL_GPL(vxlan_dev_create); + static void vxlan_handle_lowerdev_unregister(struct vxlan_net *vn, struct net_device *dev) { -- cgit v1.2.3 From 41009481b690493c169ce85f591b9d32c6fd9422 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 13 Jun 2016 10:31:07 +0200 Subject: ovs/geneve: fix rtnl notifications on iface deletion The function geneve_dev_create_fb() (only used by ovs) never calls rtnl_configure_link(). The consequence is that dev->rtnl_link_state is never set to RTNL_LINK_INITIALIZED. During the deletion phase, the function rollback_registered_many() sends a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED. Fixes: e305ac6cf5a1 ("geneve: Add support to collect tunnel metadata.") CC: Pravin B Shelar CC: Jesse Gross CC: Thomas Graf Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/geneve.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 086c2dae4c3d..305a04e45a13 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1532,6 +1532,10 @@ struct net_device *geneve_dev_create_fb(struct net *net, const char *name, if (err) goto err; + err = rtnl_configure_link(dev, NULL); + if (err < 0) + goto err; + return dev; err: -- cgit v1.2.3 From 3ff211270a986f19c7983378ee9c4db2497eaeaf Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 8 Jun 2016 19:04:35 +0800 Subject: drm/amd/powerplay: update powerplay table parsing to handle pptable format change on Polaris boards Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr_ppt.h | 1 + .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 23 ++++-- .../gpu/drm/amd/powerplay/hwmgr/tonga_pptable.h | 16 ++++ .../amd/powerplay/hwmgr/tonga_processpptables.c | 91 +++++++++++++++------- 4 files changed, 97 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr_ppt.h b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr_ppt.h index 347fef127ce9..2930a3355948 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr_ppt.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr_ppt.h @@ -39,6 +39,7 @@ struct phm_ppt_v1_clock_voltage_dependency_record { uint8_t phases; uint8_t cks_enable; uint8_t cks_voffset; + uint32_t sclk_offset; }; typedef struct phm_ppt_v1_clock_voltage_dependency_record phm_ppt_v1_clock_voltage_dependency_record; diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index aa6be033f21b..ad0995c5c563 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -999,7 +999,7 @@ static int polaris10_get_dependency_volt_by_clk(struct pp_hwmgr *hwmgr, vddci = phm_find_closest_vddci(&(data->vddci_voltage_table), (dep_table->entries[i].vddc - (uint16_t)data->vddc_vddci_delta)); - *voltage |= (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT; + *voltage |= (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT; } if (POLARIS10_VOLTAGE_CONTROL_NONE == data->mvdd_control) @@ -3520,10 +3520,11 @@ static int polaris10_get_pp_table_entry_callback_func(struct pp_hwmgr *hwmgr, ATOM_Tonga_State *state_entry = (ATOM_Tonga_State *)state; ATOM_Tonga_POWERPLAYTABLE *powerplay_table = (ATOM_Tonga_POWERPLAYTABLE *)pp_table; - ATOM_Tonga_SCLK_Dependency_Table *sclk_dep_table = - (ATOM_Tonga_SCLK_Dependency_Table *) + PPTable_Generic_SubTable_Header *sclk_dep_table = + (PPTable_Generic_SubTable_Header *) (((unsigned long)powerplay_table) + le16_to_cpu(powerplay_table->usSclkDependencyTableOffset)); + ATOM_Tonga_MCLK_Dependency_Table *mclk_dep_table = (ATOM_Tonga_MCLK_Dependency_Table *) (((unsigned long)powerplay_table) + @@ -3575,7 +3576,11 @@ static int polaris10_get_pp_table_entry_callback_func(struct pp_hwmgr *hwmgr, /* Performance levels are arranged from low to high. */ performance_level->memory_clock = mclk_dep_table->entries [state_entry->ucMemoryClockIndexLow].ulMclk; - performance_level->engine_clock = sclk_dep_table->entries + if (sclk_dep_table->ucRevId == 0) + performance_level->engine_clock = ((ATOM_Tonga_SCLK_Dependency_Table *)sclk_dep_table)->entries + [state_entry->ucEngineClockIndexLow].ulSclk; + else if (sclk_dep_table->ucRevId == 1) + performance_level->engine_clock = ((ATOM_Polaris_SCLK_Dependency_Table *)sclk_dep_table)->entries [state_entry->ucEngineClockIndexLow].ulSclk; performance_level->pcie_gen = get_pcie_gen_support(data->pcie_gen_cap, state_entry->ucPCIEGenLow); @@ -3586,8 +3591,14 @@ static int polaris10_get_pp_table_entry_callback_func(struct pp_hwmgr *hwmgr, [polaris10_power_state->performance_level_count++]); performance_level->memory_clock = mclk_dep_table->entries [state_entry->ucMemoryClockIndexHigh].ulMclk; - performance_level->engine_clock = sclk_dep_table->entries + + if (sclk_dep_table->ucRevId == 0) + performance_level->engine_clock = ((ATOM_Tonga_SCLK_Dependency_Table *)sclk_dep_table)->entries + [state_entry->ucEngineClockIndexHigh].ulSclk; + else if (sclk_dep_table->ucRevId == 1) + performance_level->engine_clock = ((ATOM_Polaris_SCLK_Dependency_Table *)sclk_dep_table)->entries [state_entry->ucEngineClockIndexHigh].ulSclk; + performance_level->pcie_gen = get_pcie_gen_support(data->pcie_gen_cap, state_entry->ucPCIEGenHigh); performance_level->pcie_lane = get_pcie_lane_support(data->pcie_lane_cap, @@ -3645,7 +3656,6 @@ static int polaris10_get_pp_table_entry(struct pp_hwmgr *hwmgr, switch (state->classification.ui_label) { case PP_StateUILabel_Performance: data->use_pcie_performance_levels = true; - for (i = 0; i < ps->performance_level_count; i++) { if (data->pcie_gen_performance.max < ps->performance_levels[i].pcie_gen) @@ -3661,7 +3671,6 @@ static int polaris10_get_pp_table_entry(struct pp_hwmgr *hwmgr, ps->performance_levels[i].pcie_lane) data->pcie_lane_performance.max = ps->performance_levels[i].pcie_lane; - if (data->pcie_lane_performance.min > ps->performance_levels[i].pcie_lane) data->pcie_lane_performance.min = diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_pptable.h b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_pptable.h index 1b44f4e9b8f5..f127198aafc4 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_pptable.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_pptable.h @@ -197,6 +197,22 @@ typedef struct _ATOM_Tonga_SCLK_Dependency_Table { ATOM_Tonga_SCLK_Dependency_Record entries[1]; /* Dynamically allocate entries. */ } ATOM_Tonga_SCLK_Dependency_Table; +typedef struct _ATOM_Polaris_SCLK_Dependency_Record { + UCHAR ucVddInd; /* Base voltage */ + USHORT usVddcOffset; /* Offset relative to base voltage */ + ULONG ulSclk; + USHORT usEdcCurrent; + UCHAR ucReliabilityTemperature; + UCHAR ucCKSVOffsetandDisable; /* Bits 0~6: Voltage offset for CKS, Bit 7: Disable/enable for the SCLK level. */ + ULONG ulSclkOffset; +} ATOM_Polaris_SCLK_Dependency_Record; + +typedef struct _ATOM_Polaris_SCLK_Dependency_Table { + UCHAR ucRevId; + UCHAR ucNumEntries; /* Number of entries. */ + ATOM_Polaris_SCLK_Dependency_Record entries[1]; /* Dynamically allocate entries. */ +} ATOM_Polaris_SCLK_Dependency_Table; + typedef struct _ATOM_Tonga_PCIE_Record { UCHAR ucPCIEGenSpeed; UCHAR usPCIELaneWidth; diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_processpptables.c b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_processpptables.c index 296ec7ef6d45..671fdb4d615a 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_processpptables.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_processpptables.c @@ -408,41 +408,78 @@ static int get_mclk_voltage_dependency_table( static int get_sclk_voltage_dependency_table( struct pp_hwmgr *hwmgr, phm_ppt_v1_clock_voltage_dependency_table **pp_tonga_sclk_dep_table, - const ATOM_Tonga_SCLK_Dependency_Table * sclk_dep_table + const PPTable_Generic_SubTable_Header *sclk_dep_table ) { uint32_t table_size, i; phm_ppt_v1_clock_voltage_dependency_table *sclk_table; - PP_ASSERT_WITH_CODE((0 != sclk_dep_table->ucNumEntries), - "Invalid PowerPlay Table!", return -1); + if (sclk_dep_table->ucRevId < 1) { + const ATOM_Tonga_SCLK_Dependency_Table *tonga_table = + (ATOM_Tonga_SCLK_Dependency_Table *)sclk_dep_table; - table_size = sizeof(uint32_t) + sizeof(phm_ppt_v1_clock_voltage_dependency_record) - * sclk_dep_table->ucNumEntries; + PP_ASSERT_WITH_CODE((0 != tonga_table->ucNumEntries), + "Invalid PowerPlay Table!", return -1); - sclk_table = (phm_ppt_v1_clock_voltage_dependency_table *) - kzalloc(table_size, GFP_KERNEL); + table_size = sizeof(uint32_t) + sizeof(phm_ppt_v1_clock_voltage_dependency_record) + * tonga_table->ucNumEntries; - if (NULL == sclk_table) - return -ENOMEM; + sclk_table = (phm_ppt_v1_clock_voltage_dependency_table *) + kzalloc(table_size, GFP_KERNEL); - memset(sclk_table, 0x00, table_size); - - sclk_table->count = (uint32_t)sclk_dep_table->ucNumEntries; - - for (i = 0; i < sclk_dep_table->ucNumEntries; i++) { - sclk_table->entries[i].vddInd = - sclk_dep_table->entries[i].ucVddInd; - sclk_table->entries[i].vdd_offset = - sclk_dep_table->entries[i].usVddcOffset; - sclk_table->entries[i].clk = - sclk_dep_table->entries[i].ulSclk; - sclk_table->entries[i].cks_enable = - (((sclk_dep_table->entries[i].ucCKSVOffsetandDisable & 0x80) >> 7) == 0) ? 1 : 0; - sclk_table->entries[i].cks_voffset = - (sclk_dep_table->entries[i].ucCKSVOffsetandDisable & 0x7F); - } + if (NULL == sclk_table) + return -ENOMEM; + + memset(sclk_table, 0x00, table_size); + + sclk_table->count = (uint32_t)tonga_table->ucNumEntries; + + for (i = 0; i < tonga_table->ucNumEntries; i++) { + sclk_table->entries[i].vddInd = + tonga_table->entries[i].ucVddInd; + sclk_table->entries[i].vdd_offset = + tonga_table->entries[i].usVddcOffset; + sclk_table->entries[i].clk = + tonga_table->entries[i].ulSclk; + sclk_table->entries[i].cks_enable = + (((tonga_table->entries[i].ucCKSVOffsetandDisable & 0x80) >> 7) == 0) ? 1 : 0; + sclk_table->entries[i].cks_voffset = + (tonga_table->entries[i].ucCKSVOffsetandDisable & 0x7F); + } + } else { + const ATOM_Polaris_SCLK_Dependency_Table *polaris_table = + (ATOM_Polaris_SCLK_Dependency_Table *)sclk_dep_table; + PP_ASSERT_WITH_CODE((0 != polaris_table->ucNumEntries), + "Invalid PowerPlay Table!", return -1); + + table_size = sizeof(uint32_t) + sizeof(phm_ppt_v1_clock_voltage_dependency_record) + * polaris_table->ucNumEntries; + + sclk_table = (phm_ppt_v1_clock_voltage_dependency_table *) + kzalloc(table_size, GFP_KERNEL); + + if (NULL == sclk_table) + return -ENOMEM; + + memset(sclk_table, 0x00, table_size); + + sclk_table->count = (uint32_t)polaris_table->ucNumEntries; + + for (i = 0; i < polaris_table->ucNumEntries; i++) { + sclk_table->entries[i].vddInd = + polaris_table->entries[i].ucVddInd; + sclk_table->entries[i].vdd_offset = + polaris_table->entries[i].usVddcOffset; + sclk_table->entries[i].clk = + polaris_table->entries[i].ulSclk; + sclk_table->entries[i].cks_enable = + (((polaris_table->entries[i].ucCKSVOffsetandDisable & 0x80) >> 7) == 0) ? 1 : 0; + sclk_table->entries[i].cks_voffset = + (polaris_table->entries[i].ucCKSVOffsetandDisable & 0x7F); + sclk_table->entries[i].sclk_offset = polaris_table->entries[i].ulSclkOffset; + } + } *pp_tonga_sclk_dep_table = sclk_table; return 0; @@ -708,8 +745,8 @@ static int init_clock_voltage_dependency( const ATOM_Tonga_MCLK_Dependency_Table *mclk_dep_table = (const ATOM_Tonga_MCLK_Dependency_Table *)(((unsigned long) powerplay_table) + le16_to_cpu(powerplay_table->usMclkDependencyTableOffset)); - const ATOM_Tonga_SCLK_Dependency_Table *sclk_dep_table = - (const ATOM_Tonga_SCLK_Dependency_Table *)(((unsigned long) powerplay_table) + + const PPTable_Generic_SubTable_Header *sclk_dep_table = + (const PPTable_Generic_SubTable_Header *)(((unsigned long) powerplay_table) + le16_to_cpu(powerplay_table->usSclkDependencyTableOffset)); const ATOM_Tonga_Hard_Limit_Table *pHardLimits = (const ATOM_Tonga_Hard_Limit_Table *)(((unsigned long) powerplay_table) + -- cgit v1.2.3 From 871fd8403de10b9ba9c284105475ab52b96be248 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Sun, 12 Jun 2016 11:18:01 +0800 Subject: drm/amd/powerplay: select samu dpm 0 as boot level on polaris. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index ad0995c5c563..1400bc420881 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -4196,12 +4196,9 @@ int polaris10_update_samu_dpm(struct pp_hwmgr *hwmgr, bool bgate) { struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); uint32_t mm_boot_level_offset, mm_boot_level_value; - struct phm_ppt_v1_information *table_info = - (struct phm_ppt_v1_information *)(hwmgr->pptable); if (!bgate) { - data->smc_state_table.SamuBootLevel = - (uint8_t) (table_info->mm_dep_table->count - 1); + data->smc_state_table.SamuBootLevel = 0; mm_boot_level_offset = data->dpm_table_start + offsetof(SMU74_Discrete_DpmTable, SamuBootLevel); mm_boot_level_offset /= 4; -- cgit v1.2.3 From 539aae6e3af97c7ec1602ff23e805f2852c2611c Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Mon, 6 Jun 2016 16:11:52 +0900 Subject: drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64" This reverts commit 1733a2ad36741b1812cf8b3f3037c28d0af53f50. There is apparently something amiss with the way the TTM code handles DMA buffers, which the above commit was attempting to work around for arm64 systems with non-coherent PCI. Unfortunately, this completely breaks systems *with* coherent PCI (which appear to be the majority). Booting a plain arm64 defconfig + CONFIG_DRM + CONFIG_DRM_NOUVEAU on a machine with a PCI GPU having coherent dma_map_ops (in this case a 7600GT card plugged into an ARM Juno board) results in a fatal crash: [ 2.803438] nouveau 0000:06:00.0: DRM: allocated 1024x768 fb: 0x9000, bo ffffffc976141c00 [ 2.897662] Unable to handle kernel NULL pointer dereference at virtual address 000001ac [ 2.897666] pgd = ffffff8008e00000 [ 2.897675] [000001ac] *pgd=00000009ffffe003, *pud=00000009ffffe003, *pmd=0000000000000000 [ 2.897680] Internal error: Oops: 96000045 [#1] PREEMPT SMP [ 2.897685] Modules linked in: [ 2.897692] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc5+ #543 [ 2.897694] Hardware name: ARM Juno development board (r1) (DT) [ 2.897699] task: ffffffc9768a0000 ti: ffffffc9768a8000 task.ti: ffffffc9768a8000 [ 2.897711] PC is at __memcpy+0x7c/0x180 [ 2.897719] LR is at OUT_RINGp+0x34/0x70 [ 2.897724] pc : [] lr : [] pstate: 80000045 [ 2.897726] sp : ffffffc9768ab360 [ 2.897732] x29: ffffffc9768ab360 x28: 0000000000000001 [ 2.897738] x27: ffffffc97624c000 x26: 0000000000000000 [ 2.897744] x25: 0000000000000080 x24: 0000000000006c00 [ 2.897749] x23: 0000000000000005 x22: ffffffc97624c010 [ 2.897755] x21: 0000000000000004 x20: 0000000000000004 [ 2.897761] x19: ffffffc9763da000 x18: ffffffc976b2491c [ 2.897766] x17: 0000000000000007 x16: 0000000000000006 [ 2.897771] x15: 0000000000000001 x14: 0000000000000001 [ 2.897777] x13: 0000000000e31b70 x12: ffffffc9768a0080 [ 2.897783] x11: 0000000000000000 x10: fffffffffffffb00 [ 2.897788] x9 : 0000000000000000 x8 : 0000000000000000 [ 2.897793] x7 : 0000000000000000 x6 : 00000000000001ac [ 2.897799] x5 : 00000000ffffffff x4 : 0000000000000000 [ 2.897804] x3 : 0000000000000010 x2 : 0000000000000010 [ 2.897810] x1 : ffffffc97624c010 x0 : 00000000000001ac ... [ 2.898494] Call trace: [ 2.898499] Exception stack(0xffffffc9768ab1a0 to 0xffffffc9768ab2c0) [ 2.898506] b1a0: ffffffc9763da000 0000000000000004 ffffffc9768ab360 ffffff80083465fc [ 2.898513] b1c0: ffffffc976801e00 ffffffc9762b8000 ffffffc9768ab1f0 ffffff80080ec158 [ 2.898520] b1e0: ffffffc9768ab230 ffffff8008496d04 ffffffc975ce6d80 ffffffc9768ab36e [ 2.898527] b200: ffffffc9768ab36f ffffffc9768ab29d ffffffc9768ab29e ffffffc9768a0000 [ 2.898533] b220: ffffffc9768ab250 ffffff80080e70c0 ffffffc9768ab270 ffffff8008496e44 [ 2.898540] b240: 00000000000001ac ffffffc97624c010 0000000000000010 0000000000000010 [ 2.898546] b260: 0000000000000000 00000000ffffffff 00000000000001ac 0000000000000000 [ 2.898552] b280: 0000000000000000 0000000000000000 fffffffffffffb00 0000000000000000 [ 2.898558] b2a0: ffffffc9768a0080 0000000000e31b70 0000000000000001 0000000000000001 [ 2.898566] [] __memcpy+0x7c/0x180 [ 2.898574] [] nv04_fbcon_imageblit+0x1d4/0x2e8 [ 2.898582] [] nouveau_fbcon_imageblit+0xd8/0xe0 [ 2.898591] [] soft_cursor+0x154/0x1d8 [ 2.898598] [] bit_cursor+0x4fc/0x538 [ 2.898605] [] fbcon_cursor+0x134/0x1a8 [ 2.898613] [] hide_cursor+0x38/0xa0 [ 2.898620] [] redraw_screen+0x120/0x228 [ 2.898628] [] fbcon_prepare_logo+0x370/0x3f8 [ 2.898635] [] fbcon_init+0x350/0x560 [ 2.898641] [] visual_init+0xac/0x108 [ 2.898648] [] do_bind_con_driver+0x1c4/0x3a8 [ 2.898655] [] do_take_over_console+0x174/0x1e8 [ 2.898662] [] do_fbcon_takeover+0x74/0x100 [ 2.898669] [] fbcon_event_notify+0x8cc/0x920 [ 2.898680] [] notifier_call_chain+0x50/0x90 [ 2.898685] [] __blocking_notifier_call_chain+0x4c/0x90 [ 2.898691] [] blocking_notifier_call_chain+0x14/0x20 [ 2.898696] [] fb_notifier_call_chain+0x1c/0x28 [ 2.898703] [] register_framebuffer+0x1cc/0x2e0 [ 2.898712] [] drm_fb_helper_initial_config+0x288/0x3e8 [ 2.898719] [] nouveau_fbcon_init+0xe0/0x118 [ 2.898727] [] nouveau_drm_load+0x268/0x890 [ 2.898734] [] drm_dev_register+0xbc/0xc8 [ 2.898740] [] drm_get_pci_dev+0xa0/0x180 [ 2.898747] [] nouveau_drm_probe+0x1a0/0x1e0 [ 2.898755] [] pci_device_probe+0x98/0x110 [ 2.898763] [] driver_probe_device+0x204/0x2b0 [ 2.898770] [] __driver_attach+0xac/0xb0 [ 2.898777] [] bus_for_each_dev+0x60/0xa0 [ 2.898783] [] driver_attach+0x20/0x28 [ 2.898789] [] bus_add_driver+0x1d0/0x238 [ 2.898796] [] driver_register+0x60/0xf8 [ 2.898802] [] __pci_register_driver+0x3c/0x48 [ 2.898809] [] drm_pci_init+0xf4/0x120 [ 2.898818] [] nouveau_drm_init+0x21c/0x230 [ 2.898825] [] do_one_initcall+0x8c/0x190 [ 2.898832] [] kernel_init_freeable+0x14c/0x1f0 [ 2.898839] [] kernel_init+0x10/0x100 [ 2.898845] [] ret_from_fork+0x10/0x40 [ 2.898853] Code: a88120c7 a8c12027 a88120c7 a8c12027 (a88120c7) [ 2.898871] ---[ end trace d5713dcad023ee04 ]--- [ 2.898888] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b In a toss-up between the GPU seeing stale data artefacts on some systems vs. catastrophic kernel crashes on other systems, the latter would seem to take precedence, so revert this change until the real underlying problem can be fixed. Signed-off-by: Robin Murphy Acked-by: Alexandre Courbot [acourbot@nvidia.com: port to Nouveau tree, remove bits in lib/] Signed-off-by: Alexandre Courbot Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/nvkm/engine/device/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/pci.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/pci.c index 18fab3973ce5..62ad0300cfa5 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/device/pci.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/pci.c @@ -1614,7 +1614,7 @@ nvkm_device_pci_func = { .fini = nvkm_device_pci_fini, .resource_addr = nvkm_device_pci_resource_addr, .resource_size = nvkm_device_pci_resource_size, - .cpu_coherent = !IS_ENABLED(CONFIG_ARM) && !IS_ENABLED(CONFIG_ARM64), + .cpu_coherent = !IS_ENABLED(CONFIG_ARM), }; int -- cgit v1.2.3 From 6aa85f1129b32b5cd19ec262e7cfc2ddc08263c3 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 26 May 2016 17:04:52 +1000 Subject: drm/nouveau/iccsense: fix memory leak Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/subdev/iccsense/base.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/iccsense/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/iccsense/base.c index 323c79abe468..41bd5d0f7692 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/iccsense/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/iccsense/base.c @@ -276,6 +276,8 @@ nvkm_iccsense_oneinit(struct nvkm_subdev *subdev) struct pwr_rail_t *r = &stbl.rail[i]; struct nvkm_iccsense_rail *rail; struct nvkm_iccsense_sensor *sensor; + int (*read)(struct nvkm_iccsense *, + struct nvkm_iccsense_rail *); if (!r->mode || r->resistor_mohm == 0) continue; @@ -284,31 +286,31 @@ nvkm_iccsense_oneinit(struct nvkm_subdev *subdev) if (!sensor) continue; - rail = kmalloc(sizeof(*rail), GFP_KERNEL); - if (!rail) - return -ENOMEM; - switch (sensor->type) { case NVBIOS_EXTDEV_INA209: if (r->rail != 0) continue; - rail->read = nvkm_iccsense_ina209_read; + read = nvkm_iccsense_ina209_read; break; case NVBIOS_EXTDEV_INA219: if (r->rail != 0) continue; - rail->read = nvkm_iccsense_ina219_read; + read = nvkm_iccsense_ina219_read; break; case NVBIOS_EXTDEV_INA3221: if (r->rail >= 3) continue; - rail->read = nvkm_iccsense_ina3221_read; + read = nvkm_iccsense_ina3221_read; break; default: continue; } + rail = kmalloc(sizeof(*rail), GFP_KERNEL); + if (!rail) + return -ENOMEM; sensor->rail_mask |= 1 << r->rail; + rail->read = read; rail->sensor = sensor; rail->idx = r->rail; rail->mohm = r->resistor_mohm; -- cgit v1.2.3 From 62e6d1e59c77316768a663d1328390b4cd33801f Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 15 Jun 2016 11:12:05 +0300 Subject: extcon: palmas: Fix boot up state of VBUS when using GPIO detection If USB cable is connected prior to boot, we don't get any interrupts so we must manually check the VBUS state and report it during probe. If we don't do it then USB controller will never know that peripheral cable was connected till the user unplugs and replugs the cable. Fixes: b7aad8e2685b ("extcon: palmas: Add the support for VBUS detection by using GPIO") Cc: stable@vger.kernel.org Signed-off-by: Roger Quadros Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-palmas.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c index 8b3226dca1d9..caff46c0e214 100644 --- a/drivers/extcon/extcon-palmas.c +++ b/drivers/extcon/extcon-palmas.c @@ -360,6 +360,8 @@ static int palmas_usb_probe(struct platform_device *pdev) palmas_enable_irq(palmas_usb); /* perform initial detection */ + if (palmas_usb->enable_gpio_vbus_detection) + palmas_vbus_irq_handler(palmas_usb->gpio_vbus_irq, palmas_usb); palmas_gpio_id_detect(&palmas_usb->wq_detectid.work); device_set_wakeup_capable(&pdev->dev, true); return 0; -- cgit v1.2.3 From f7a6c1492a2cb596952260a7d5bb0d61ca815173 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Tue, 7 Jun 2016 11:32:21 -0500 Subject: arm: pmu: Fix non-devicetree probing There is a problem in the non-devicetree PMU probing where some probe functions may get the number of supported events through smp_call_function_any() using the arm_pmu supported_cpus mask. But at the time the probe function is called, the supported_cpus mask is empty so the call fails. This patch makes sure the mask is set before calling the init function rather than after. Signed-off-by: Mark Salter Signed-off-by: Jeremy Linton Signed-off-by: Will Deacon --- drivers/perf/arm_pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c index 1b8304e1efaa..140436a046c0 100644 --- a/drivers/perf/arm_pmu.c +++ b/drivers/perf/arm_pmu.c @@ -1010,8 +1010,8 @@ int arm_pmu_device_probe(struct platform_device *pdev, if (!ret) ret = init_fn(pmu); } else { - ret = probe_current_pmu(pmu, probe_table); cpumask_setall(&pmu->supported_cpus); + ret = probe_current_pmu(pmu, probe_table); } if (ret) { -- cgit v1.2.3 From 13c34fe518624e27589827aa49f68f5f38c95f11 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 13 Jun 2016 18:28:42 +0200 Subject: drm/etnaviv: initialize iommu domain page size Since d16e0faab91 (iommu: Allow selecting page sizes per domain) the iommu core demands the page size to be set per domain, otherwise any mapping attempts will be dropped. Make sure to set a valid page size for the etnaviv iommu. Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_iommu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_iommu.c b/drivers/gpu/drm/etnaviv/etnaviv_iommu.c index 522cfd447892..16353ee81651 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_iommu.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_iommu.c @@ -225,6 +225,7 @@ struct iommu_domain *etnaviv_iommu_domain_alloc(struct etnaviv_gpu *gpu) etnaviv_domain->domain.type = __IOMMU_DOMAIN_PAGING; etnaviv_domain->domain.ops = &etnaviv_iommu_ops.ops; + etnaviv_domain->domain.pgsize_bitmap = SZ_4K; etnaviv_domain->domain.geometry.aperture_start = GPU_MEM_START; etnaviv_domain->domain.geometry.aperture_end = GPU_MEM_START + PT_ENTRIES * SZ_4K - 1; -- cgit v1.2.3 From ae8a7910fb0568531033bd6ebe65590f7a4fa6e2 Mon Sep 17 00:00:00 2001 From: John Keeping Date: Wed, 1 Jun 2016 16:46:10 +0100 Subject: iommu/rockchip: Fix zap cache during device attach rk_iommu_command() takes a struct rk_iommu and iterates over the slave MMUs, so this is doubly wrong in that we're passing in the wrong pointer and talking to MMUs that we shouldn't be. Fixes: cd6438c5f844 ("iommu/rockchip: Reconstruct to support multi slaves") Cc: stable@vger.kernel.org Signed-off-by: John Keeping Tested-by: Heiko Stuebner Reviewed-by: Heiko Stuebner Signed-off-by: Joerg Roedel --- drivers/iommu/rockchip-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c index c7d6156ff536..25b4627cb57f 100644 --- a/drivers/iommu/rockchip-iommu.c +++ b/drivers/iommu/rockchip-iommu.c @@ -815,7 +815,7 @@ static int rk_iommu_attach_device(struct iommu_domain *domain, dte_addr = virt_to_phys(rk_domain->dt); for (i = 0; i < iommu->num_mmu; i++) { rk_iommu_write(iommu->bases[i], RK_MMU_DTE_ADDR, dte_addr); - rk_iommu_command(iommu->bases[i], RK_MMU_CMD_ZAP_CACHE); + rk_iommu_base_command(iommu->bases[i], RK_MMU_CMD_ZAP_CACHE); rk_iommu_write(iommu->bases[i], RK_MMU_INT_MASK, RK_MMU_IRQ_MASK); } -- cgit v1.2.3 From f52a4c74efbb61195490535e9d65d964c4ebfee3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 14 Jun 2016 00:26:49 +0000 Subject: ata: fix return value check in ahci_seattle_get_port_info() In case of error, the function devm_kzalloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun Acked-by: Brijesh Singh Signed-off-by: Tejun Heo --- drivers/ata/ahci_seattle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/ahci_seattle.c b/drivers/ata/ahci_seattle.c index 6e702ab57220..1d31c0c0fc20 100644 --- a/drivers/ata/ahci_seattle.c +++ b/drivers/ata/ahci_seattle.c @@ -137,7 +137,7 @@ static const struct ata_port_info *ahci_seattle_get_port_info( u32 val; plat_data = devm_kzalloc(dev, sizeof(*plat_data), GFP_KERNEL); - if (IS_ERR(plat_data)) + if (!plat_data) return &ahci_port_info; plat_data->sgpio_ctrl = devm_ioremap_resource(dev, -- cgit v1.2.3 From 0c5ddb51e8f7be7170600f95a4ea92e5a32afad8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 13 Jun 2016 07:50:25 -0700 Subject: net/mlx4_en: initialize cmd.context_lock spinlock earlier MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Maciej Żenczykowski reported lockdep warning a spinlock was not registered before being held in mlx4_cmd_wake_completions() cmd.context_lock initialization is not at the right place. 1) mlx4_cmd_use_events() can be called multiple times. Calling spin_lock_init() on a live spinlock can lead to hangs. 2) mlx4_cmd_wake_completions() can be called while lock has not been initialized. Lockdep complains, and current logic is not race prone. It seems better to move the initialization earlier in mlx4_load_one() Signed-off-by: Eric Dumazet Reported-by: Maciej Żenczykowski Cc: Eugenia Emantayev Cc: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 1 - drivers/net/ethernet/mellanox/mlx4/main.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index e94ca1c3fc7c..f04a423ff79d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -2597,7 +2597,6 @@ int mlx4_cmd_use_events(struct mlx4_dev *dev) priv->cmd.free_head = 0; sema_init(&priv->cmd.event_sem, priv->cmd.max_cmds); - spin_lock_init(&priv->cmd.context_lock); for (priv->cmd.token_mask = 1; priv->cmd.token_mask < priv->cmd.max_cmds; diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 12c77a70abdb..372ebfa880f5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -3222,6 +3222,7 @@ static int mlx4_load_one(struct pci_dev *pdev, int pci_dev_data, INIT_LIST_HEAD(&priv->pgdir_list); mutex_init(&priv->pgdir_mutex); + spin_lock_init(&priv->cmd.context_lock); INIT_LIST_HEAD(&priv->bf_list); mutex_init(&priv->bf_mutex); -- cgit v1.2.3 From b196c22af5c3ff784c472c80f6fb4e5fad67b2ac Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Tue, 14 Jun 2016 15:25:14 +0200 Subject: macsec: add rcu_barrier() on module exit Without this, the various uses of call_rcu could cause a kernel panic. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- drivers/net/macsec.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 47ee2c840b55..e80736f6acd7 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -3361,6 +3361,7 @@ static void __exit macsec_exit(void) genl_unregister_family(&macsec_fam); rtnl_link_unregister(&macsec_link_ops); unregister_netdevice_notifier(&macsec_notifier); + rcu_barrier(); } module_init(macsec_init); -- cgit v1.2.3 From 5d9649b3a524df9ccd15ac25ad6591089260fdbd Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Tue, 14 Jun 2016 15:25:15 +0200 Subject: macsec: allocate sg and iv on the heap For the crypto callbacks to work properly, we cannot have sg and iv on the stack. Use kmalloc instead, with a single allocation for aead_request + scatterlist + iv. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- drivers/net/macsec.c | 46 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 37 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index e80736f6acd7..189ea3e8e8a0 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -605,12 +605,41 @@ static void macsec_encrypt_done(struct crypto_async_request *base, int err) dev_put(dev); } +static struct aead_request *macsec_alloc_req(struct crypto_aead *tfm, + unsigned char **iv, + struct scatterlist **sg) +{ + size_t size, iv_offset, sg_offset; + struct aead_request *req; + void *tmp; + + size = sizeof(struct aead_request) + crypto_aead_reqsize(tfm); + iv_offset = size; + size += GCM_AES_IV_LEN; + + size = ALIGN(size, __alignof__(struct scatterlist)); + sg_offset = size; + size += sizeof(struct scatterlist) * (MAX_SKB_FRAGS + 1); + + tmp = kmalloc(size, GFP_ATOMIC); + if (!tmp) + return NULL; + + *iv = (unsigned char *)(tmp + iv_offset); + *sg = (struct scatterlist *)(tmp + sg_offset); + req = tmp; + + aead_request_set_tfm(req, tfm); + + return req; +} + static struct sk_buff *macsec_encrypt(struct sk_buff *skb, struct net_device *dev) { int ret; - struct scatterlist sg[MAX_SKB_FRAGS + 1]; - unsigned char iv[GCM_AES_IV_LEN]; + struct scatterlist *sg; + unsigned char *iv; struct ethhdr *eth; struct macsec_eth_header *hh; size_t unprotected_len; @@ -668,8 +697,6 @@ static struct sk_buff *macsec_encrypt(struct sk_buff *skb, macsec_fill_sectag(hh, secy, pn); macsec_set_shortlen(hh, unprotected_len - 2 * ETH_ALEN); - macsec_fill_iv(iv, secy->sci, pn); - skb_put(skb, secy->icv_len); if (skb->len - ETH_HLEN > macsec_priv(dev)->real_dev->mtu) { @@ -684,13 +711,15 @@ static struct sk_buff *macsec_encrypt(struct sk_buff *skb, return ERR_PTR(-EINVAL); } - req = aead_request_alloc(tx_sa->key.tfm, GFP_ATOMIC); + req = macsec_alloc_req(tx_sa->key.tfm, &iv, &sg); if (!req) { macsec_txsa_put(tx_sa); kfree_skb(skb); return ERR_PTR(-ENOMEM); } + macsec_fill_iv(iv, secy->sci, pn); + sg_init_table(sg, MAX_SKB_FRAGS + 1); skb_to_sgvec(skb, sg, 0, skb->len); @@ -861,7 +890,6 @@ static void macsec_decrypt_done(struct crypto_async_request *base, int err) out: macsec_rxsa_put(rx_sa); dev_put(dev); - return; } static struct sk_buff *macsec_decrypt(struct sk_buff *skb, @@ -871,8 +899,8 @@ static struct sk_buff *macsec_decrypt(struct sk_buff *skb, struct macsec_secy *secy) { int ret; - struct scatterlist sg[MAX_SKB_FRAGS + 1]; - unsigned char iv[GCM_AES_IV_LEN]; + struct scatterlist *sg; + unsigned char *iv; struct aead_request *req; struct macsec_eth_header *hdr; u16 icv_len = secy->icv_len; @@ -882,7 +910,7 @@ static struct sk_buff *macsec_decrypt(struct sk_buff *skb, if (!skb) return ERR_PTR(-ENOMEM); - req = aead_request_alloc(rx_sa->key.tfm, GFP_ATOMIC); + req = macsec_alloc_req(rx_sa->key.tfm, &iv, &sg); if (!req) { kfree_skb(skb); return ERR_PTR(-ENOMEM); -- cgit v1.2.3 From 6052f7fbce857e327218a9d8a040e210ea7cc718 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Tue, 14 Jun 2016 15:25:16 +0200 Subject: macsec: fix SA initialization The ASYNC flag prevents initialization on some physical machines. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- drivers/net/macsec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 189ea3e8e8a0..0e7eff7f1cd2 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -1262,7 +1262,7 @@ static struct crypto_aead *macsec_alloc_tfm(char *key, int key_len, int icv_len) struct crypto_aead *tfm; int ret; - tfm = crypto_alloc_aead("gcm(aes)", 0, CRYPTO_ALG_ASYNC); + tfm = crypto_alloc_aead("gcm(aes)", 0, 0); if (!tfm || IS_ERR(tfm)) return NULL; -- cgit v1.2.3 From 5dc8a864be0820677e7fce85d2832d4387c7bb88 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 14 Jun 2016 15:17:40 -0300 Subject: Update my main e-mails at the Kernel tree For the third time in three years, I'm changing my e-mail at Samsung. That's bad, as it may stop communications with me for a while. So, this time, I'll also add the mchehab@kernel.org e-mail, as it remains stable since ever. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- .mailmap | 1 + CREDITS | 1 + MAINTAINERS | 51 ++++++++++++++++++++++++++------------- drivers/media/v4l2-core/v4l2-mc.c | 2 +- include/media/v4l2-mc.h | 2 +- 5 files changed, 38 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/.mailmap b/.mailmap index 08b80428f583..4a293bea648d 100644 --- a/.mailmap +++ b/.mailmap @@ -89,6 +89,7 @@ Leonid I Ananiev Linas Vepstas Mark Brown Matthieu CASTET +Mauro Carvalho Chehab Mayuresh Janorkar Michael Buesch Michel Dänzer diff --git a/CREDITS b/CREDITS index 0f0bf22afe0c..2a3fbcd229e6 100644 --- a/CREDITS +++ b/CREDITS @@ -649,6 +649,7 @@ D: Configure, Menuconfig, xconfig N: Mauro Carvalho Chehab E: m.chehab@samsung.org +E: mchehab@osg.samsung.com E: mchehab@infradead.org D: Media subsystem (V4L/DVB) drivers and core D: EDAC drivers and EDAC 3.0 core rework diff --git a/MAINTAINERS b/MAINTAINERS index 16700e4fcc4a..29e22bf887a9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2242,7 +2242,8 @@ F: include/net/ax25.h F: net/ax25/ AZ6007 DVB DRIVER -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-media@vger.kernel.org W: https://linuxtv.org T: git git://linuxtv.org/media_tree.git @@ -2709,7 +2710,8 @@ F: Documentation/filesystems/btrfs.txt F: fs/btrfs/ BTTV VIDEO4LINUX DRIVER -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-media@vger.kernel.org W: https://linuxtv.org T: git git://linuxtv.org/media_tree.git @@ -3344,7 +3346,8 @@ S: Maintained F: drivers/media/dvb-frontends/cx24120* CX88 VIDEO4LINUX DRIVER -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-media@vger.kernel.org W: https://linuxtv.org T: git git://linuxtv.org/media_tree.git @@ -4291,7 +4294,8 @@ F: fs/ecryptfs/ EDAC-CORE M: Doug Thompson M: Borislav Petkov -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-edac@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git for-next T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac.git linux_next @@ -4336,7 +4340,8 @@ S: Maintained F: drivers/edac/e7xxx_edac.c EDAC-GHES -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-edac@vger.kernel.org S: Maintained F: drivers/edac/ghes_edac.c @@ -4360,19 +4365,22 @@ S: Maintained F: drivers/edac/i5000_edac.c EDAC-I5400 -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-edac@vger.kernel.org S: Maintained F: drivers/edac/i5400_edac.c EDAC-I7300 -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-edac@vger.kernel.org S: Maintained F: drivers/edac/i7300_edac.c EDAC-I7CORE -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-edac@vger.kernel.org S: Maintained F: drivers/edac/i7core_edac.c @@ -4409,7 +4417,8 @@ S: Maintained F: drivers/edac/r82600_edac.c EDAC-SBRIDGE -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-edac@vger.kernel.org S: Maintained F: drivers/edac/sb_edac.c @@ -4468,7 +4477,8 @@ S: Maintained F: drivers/net/ethernet/ibm/ehea/ EM28XX VIDEO4LINUX DRIVER -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-media@vger.kernel.org W: https://linuxtv.org T: git git://linuxtv.org/media_tree.git @@ -7358,7 +7368,8 @@ S: Supported F: drivers/media/pci/netup_unidvb/* MEDIA INPUT INFRASTRUCTURE (V4L/DVB) -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab P: LinuxTV.org Project L: linux-media@vger.kernel.org W: https://linuxtv.org @@ -9852,7 +9863,8 @@ S: Odd Fixes F: drivers/media/i2c/saa6588* SAA7134 VIDEO4LINUX DRIVER -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-media@vger.kernel.org W: https://linuxtv.org T: git git://linuxtv.org/media_tree.git @@ -10371,7 +10383,8 @@ S: Maintained F: drivers/media/radio/si4713/radio-usb-si4713.c SIANO DVB DRIVER -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-media@vger.kernel.org W: https://linuxtv.org T: git git://linuxtv.org/media_tree.git @@ -11137,7 +11150,8 @@ S: Maintained F: drivers/media/i2c/tda9840* TEA5761 TUNER DRIVER -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-media@vger.kernel.org W: https://linuxtv.org T: git git://linuxtv.org/media_tree.git @@ -11145,7 +11159,8 @@ S: Odd fixes F: drivers/media/tuners/tea5761.* TEA5767 TUNER DRIVER -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-media@vger.kernel.org W: https://linuxtv.org T: git git://linuxtv.org/media_tree.git @@ -11532,7 +11547,8 @@ F: include/linux/shmem_fs.h F: mm/shmem.c TM6000 VIDEO4LINUX DRIVER -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-media@vger.kernel.org W: https://linuxtv.org T: git git://linuxtv.org/media_tree.git @@ -12518,7 +12534,8 @@ S: Maintained F: arch/x86/entry/vdso/ XC2028/3028 TUNER DRIVER -M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab +M: Mauro Carvalho Chehab L: linux-media@vger.kernel.org W: https://linuxtv.org T: git git://linuxtv.org/media_tree.git diff --git a/drivers/media/v4l2-core/v4l2-mc.c b/drivers/media/v4l2-core/v4l2-mc.c index ca94bded3386..8bef4331bd51 100644 --- a/drivers/media/v4l2-core/v4l2-mc.c +++ b/drivers/media/v4l2-core/v4l2-mc.c @@ -1,7 +1,7 @@ /* * Media Controller ancillary functions * - * Copyright (c) 2016 Mauro Carvalho Chehab + * Copyright (c) 2016 Mauro Carvalho Chehab * Copyright (C) 2016 Shuah Khan * Copyright (C) 2006-2010 Nokia Corporation * Copyright (c) 2016 Intel Corporation. diff --git a/include/media/v4l2-mc.h b/include/media/v4l2-mc.h index 98a938aabdfb..7a8d6037a4bb 100644 --- a/include/media/v4l2-mc.h +++ b/include/media/v4l2-mc.h @@ -1,7 +1,7 @@ /* * v4l2-mc.h - Media Controller V4L2 types and prototypes * - * Copyright (C) 2016 Mauro Carvalho Chehab + * Copyright (C) 2016 Mauro Carvalho Chehab * Copyright (C) 2006-2010 Nokia Corporation * Copyright (c) 2016 Intel Corporation. * -- cgit v1.2.3 From 7e1b1fc4dabd6ec8e28baa0708866e13fa93c9b3 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 10 Jun 2016 10:54:32 +0200 Subject: base: make module_create_drivers_dir race-free Modules which register drivers via standard path (driver_register) in parallel can cause a warning: WARNING: CPU: 2 PID: 3492 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80 sysfs: cannot create duplicate filename '/module/saa7146/drivers' Modules linked in: hexium_gemini(+) mxb(+) ... ... Call Trace: ... [] sysfs_warn_dup+0x62/0x80 [] sysfs_create_dir_ns+0x77/0x90 [] kobject_add_internal+0xb4/0x340 [] kobject_add+0x68/0xb0 [] kobject_create_and_add+0x31/0x70 [] module_add_driver+0xc3/0xd0 [] bus_add_driver+0x154/0x280 [] driver_register+0x60/0xe0 [] __pci_register_driver+0x60/0x70 [] saa7146_register_extension+0x64/0x90 [saa7146] [] hexium_init_module+0x11/0x1000 [hexium_gemini] ... As can be (mostly) seen, driver_register causes this call sequence: -> bus_add_driver -> module_add_driver -> module_create_drivers_dir The last one creates "drivers" directory in /sys/module/<...>. When this is done in parallel, the directory is attempted to be created twice at the same time. This can be easily reproduced by loading mxb and hexium_gemini in parallel: while :; do modprobe mxb & modprobe hexium_gemini wait rmmod mxb hexium_gemini saa7146_vv saa7146 done saa7146 calls pci_register_driver for both mxb and hexium_gemini, which means /sys/module/saa7146/drivers is to be created for both of them. Fix this by a new mutex in module_create_drivers_dir which makes the test-and-create "drivers" dir atomic. I inverted the condition and removed 'return' to avoid multiple unlocks or a goto. Signed-off-by: Jiri Slaby Fixes: fe480a2675ed (Modules: only add drivers/ direcory if needed) Cc: v2.6.21+ Signed-off-by: Greg Kroah-Hartman --- drivers/base/module.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/base/module.c b/drivers/base/module.c index db930d3ee312..2a215780eda2 100644 --- a/drivers/base/module.c +++ b/drivers/base/module.c @@ -24,10 +24,12 @@ static char *make_driver_name(struct device_driver *drv) static void module_create_drivers_dir(struct module_kobject *mk) { - if (!mk || mk->drivers_dir) - return; + static DEFINE_MUTEX(drivers_dir_mutex); - mk->drivers_dir = kobject_create_and_add("drivers", &mk->kobj); + mutex_lock(&drivers_dir_mutex); + if (mk && !mk->drivers_dir) + mk->drivers_dir = kobject_create_and_add("drivers", &mk->kobj); + mutex_unlock(&drivers_dir_mutex); } void module_add_driver(struct module *mod, struct device_driver *drv) -- cgit v1.2.3 From 4a1836701fd59476ee1331379e00a9ab51ba4f61 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Jun 2016 17:45:51 +0200 Subject: net: skfb: remove obsolete -I cflag The skfp driver has been moved to drivers/net/fddi/skfp a long time ago, but we still attempt to include headers from the old location, which causes a warning when building with W=1: cc1: error: /git/arm-soc/drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs] cc1: error: drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs] Clearly this include directive is not needed any more, so we can just remove it now. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/fddi/skfp/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/fddi/skfp/Makefile b/drivers/net/fddi/skfp/Makefile index b0be0234abf6..a957a1c7e5ba 100644 --- a/drivers/net/fddi/skfp/Makefile +++ b/drivers/net/fddi/skfp/Makefile @@ -17,4 +17,4 @@ skfp-objs := skfddi.o hwmtm.o fplustm.o smt.o cfm.o \ # projects. To keep the source common for all those drivers (and # thus simplify fixes to it), please do not clean it up! -ccflags-y := -Idrivers/net/skfp -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes +ccflags-y := -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes -- cgit v1.2.3 From 4e384ac19b5be6ad084b215d298b82b3a91ad24b Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 16 Jun 2016 10:55:17 +0800 Subject: r8152: disable MAC clock speed down Disable MAC clock speed down. It may casue the first control transfer to contain the wrong data, when the power state change from U1 to U0. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 3f9f6ed3eec4..89dc752f92bd 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3382,15 +3382,11 @@ static void r8153_init(struct r8152 *tp) r8153_power_cut_en(tp, false); r8153_u1u2en(tp, true); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, - PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN | - U1U2_SPDWN_EN | L1_SPDWN_EN); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, - PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN | - TP100_SPDWN_EN | TP500_SPDWN_EN | TP1000_SPDWN_EN | - EEE_SPDWN_EN); + /* MAC clock speed down */ + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0); r8153_enable_eee(tp); r8153_aldps_en(tp, true); -- cgit v1.2.3 From 93fe9b1838404fcc3bea320b704bfa461d8e57a6 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 16 Jun 2016 10:55:18 +0800 Subject: r8152: reset the bmu Reset the BMU to clear the rx/tx fifo. This avoids that the unexpected data remains in the hw. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 89dc752f92bd..f5bc351e09ef 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -116,6 +116,7 @@ #define USB_TX_DMA 0xd434 #define USB_TOLERANCE 0xd490 #define USB_LPM_CTRL 0xd41a +#define USB_BMU_RESET 0xd4b0 #define USB_UPS_CTRL 0xd800 #define USB_MISC_0 0xd81a #define USB_POWER_CUT 0xd80a @@ -338,6 +339,10 @@ #define TEST_MODE_DISABLE 0x00000001 #define TX_SIZE_ADJUST1 0x00000100 +/* USB_BMU_RESET */ +#define BMU_RESET_EP_IN 0x01 +#define BMU_RESET_EP_OUT 0x02 + /* USB_UPS_CTRL */ #define POWER_CUT 0x0100 @@ -2456,6 +2461,17 @@ static void r8153_teredo_off(struct r8152 *tp) ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0); } +static void rtl_reset_bmu(struct r8152 *tp) +{ + u32 ocp_data; + + ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET); + ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT); + ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data); + ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT; + ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data); +} + static void r8152_aldps_en(struct r8152 *tp, bool enable) { if (enable) { @@ -2681,6 +2697,7 @@ static void r8153_first_init(struct r8152 *tp) r8153_hw_phy_cfg(tp); rtl8152_nic_reset(tp); + rtl_reset_bmu(tp); ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ocp_data &= ~NOW_IS_OOB; @@ -2742,6 +2759,7 @@ static void r8153_enter_oob(struct r8152 *tp) ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); rtl_disable(tp); + rtl_reset_bmu(tp); for (i = 0; i < 1000; i++) { ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); @@ -2803,6 +2821,7 @@ static void rtl8153_disable(struct r8152 *tp) { r8153_aldps_en(tp, false); rtl_disable(tp); + rtl_reset_bmu(tp); r8153_aldps_en(tp, true); usb_enable_lpm(tp->udev); } -- cgit v1.2.3 From a59e6d815226b70780427648e359da9bbee07171 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 16 Jun 2016 10:55:19 +0800 Subject: r8152: correct the rx early size The rx early size should be (agg_buf_sz - packet size) / 8 Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index f5bc351e09ef..4e257b8d8f3e 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -31,7 +31,7 @@ #define NETNEXT_VERSION "08" /* Information for net */ -#define NET_VERSION "3" +#define NET_VERSION "4" #define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION #define DRIVER_AUTHOR "Realtek linux nic maintainers " @@ -2174,7 +2174,7 @@ static void r8153_set_rx_early_timeout(struct r8152 *tp) static void r8153_set_rx_early_size(struct r8152 *tp) { u32 mtu = tp->netdev->mtu; - u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 4; + u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 8; ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data); } -- cgit v1.2.3 From ec48a1d981fe90ecb5bcfaaf1ae2c69d842cbbbc Mon Sep 17 00:00:00 2001 From: Suzuki K Poulose Date: Tue, 14 Jun 2016 11:17:12 -0600 Subject: coresight: Fix NULL pointer dereference in _coresight_build_path _coresight_build_path assumes that all the connections of a csdev has the child_dev initialised. This may not be true if the particular component is not supported by the kernel config(e.g TPIU) but is present in the DT. In which case, building a path can cause a crash like this : Unable to handle kernel NULL pointer dereference at virtual address 00000010 pgd = ffffffc9750dd000 [00000010] *pgd=00000009f5e90003, *pud=00000009f5e90003, *pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: CPU: 4 PID: 1348 Comm: bash Not tainted 4.6.0-next-20160517 #1646 Hardware name: ARM Juno development board (r0) (DT) task: ffffffc97517a280 ti: ffffffc9762c4000 task.ti: ffffffc9762c4000 PC is at _coresight_build_path+0x18/0xe4 LR is at _coresight_build_path+0xc0/0xe4 pc : [] lr : [] pstate: 20000145 sp : ffffffc9762c7ba0 [] _coresight_build_path+0x18/0xe4 [] _coresight_build_path+0xc0/0xe4 [] _coresight_build_path+0xc0/0xe4 [] _coresight_build_path+0xc0/0xe4 [] _coresight_build_path+0xc0/0xe4 [] _coresight_build_path+0xc0/0xe4 [] coresight_build_path+0x40/0x68 [] coresight_enable+0x74/0x1bc [] enable_source_store+0x3c/0x6c [] dev_attr_store+0x18/0x28 [] sysfs_kf_write+0x40/0x50 [] kernfs_fop_write+0x140/0x1cc [] __vfs_write+0x28/0x110 [] vfs_write+0xa0/0x174 [] SyS_write+0x44/0xa0 [] el0_svc_naked+0x24/0x28 Cc: Mathieu Poirier Signed-off-by: Suzuki K Poulose Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c index 5443d03a1eec..0fdaaf4a8994 100644 --- a/drivers/hwtracing/coresight/coresight.c +++ b/drivers/hwtracing/coresight/coresight.c @@ -385,7 +385,6 @@ static int _coresight_build_path(struct coresight_device *csdev, int i; bool found = false; struct coresight_node *node; - struct coresight_connection *conn; /* An activated sink has been found. Enqueue the element */ if ((csdev->type == CORESIGHT_DEV_TYPE_SINK || @@ -394,8 +393,9 @@ static int _coresight_build_path(struct coresight_device *csdev, /* Not a sink - recursively explore each port found on this element */ for (i = 0; i < csdev->nr_outport; i++) { - conn = &csdev->conns[i]; - if (_coresight_build_path(conn->child_dev, path) == 0) { + struct coresight_device *child_dev = csdev->conns[i].child_dev; + + if (child_dev && _coresight_build_path(child_dev, path) == 0) { found = true; break; } -- cgit v1.2.3 From 8e215298a15d5b93c6fa22895c406da538769bca Mon Sep 17 00:00:00 2001 From: Suzuki K Poulose Date: Tue, 14 Jun 2016 11:17:13 -0600 Subject: coresight: Fix tmc_read_unprepare_etr At the end of the trace capture, we free the allocated memory, resetting the drvdata->buf to NULL, to indicate that trace data was collected and the next trace session should allocate the memory in tmc_enable_etr_sink_sysfs. The tmc_enable_etr_sink_sysfs, we only allocate memory if drvdata->vaddr is not NULL (which is not performed at the end of previous session). This can cause, drvdata->vaddr getting assigned NULL and later we do memset() which causes a crash as below : Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffffc9747f0000 [00000000] *pgd=00000009f402e003, *pud=00000009f402e003, *pmd=0000000000000000 Internal error: Oops: 96000046 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1592 Comm: bash Not tainted 4.7.0-rc1+ #1712 Hardware name: ARM Juno development board (r0) (DT) task: ffffffc078fe0080 ti: ffffffc974178000 task.ti: ffffffc974178000 PC is at __memset+0x1ac/0x200 LR is at tmc_enable_etr_sink+0xf8/0x304 pc : [] lr : [] pstate: 400001c5 sp : ffffffc97417bc00 x29: ffffffc97417bc00 x28: ffffffc974178000 Call trace: Exception stack(0xffffffc97417ba40 to 0xffffffc97417bb60) ba40: 0000000000000001 ffffffc974a5d098 ffffffc97417bc00 ffffff80083a002c ba60: ffffffc974a5d118 0000000000000000 0000000000000000 0000000000000000 ba80: 0000000000000001 0000000000000000 ffffff800859bdec 0000000000000040 baa0: ffffff8008b45b58 00000000000001c0 ffffffc97417baf0 ffffff80080eddb4 bac0: 0000000000000003 ffffffc078fe0080 ffffffc078fe0960 ffffffc078fe0940 bae0: 0000000000000000 0000000000000000 00000000007fffc0 0000000000000004 bb00: 0000000000000000 0000000000000040 000000000000003f 0000000000000000 bb20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 bb40: ffffffc078fe0960 0000000000000018 ffffffffffffffff 0008669628000000 [] __memset+0x1ac/0x200 [] coresight_enable_path+0xa8/0x1dc [] coresight_enable+0x88/0x1b8 [] enable_source_store+0x3c/0x6c [] dev_attr_store+0x18/0x28 [] sysfs_kf_write+0x54/0x64 [] kernfs_fop_write+0x148/0x1d8 [] __vfs_write+0x28/0x110 [] vfs_write+0xa0/0x198 [] SyS_write+0x44/0xa0 [] el0_svc_naked+0x24/0x28 Code: 91010108 54ffff4a 8b040108 cb050042 (d50b7428) This patch fixes the issue by clearing the drvdata->vaddr while we free the allocated buffer at the end of a session, so that we allocate the memory again. Cc: mathieu.poirier@linaro.org Signed-off-by: Suzuki K Poulose Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-tmc-etr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index 847d1b5f2c13..3369d7a80a51 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -315,7 +315,7 @@ int tmc_read_unprepare_etr(struct tmc_drvdata *drvdata) */ vaddr = drvdata->vaddr; paddr = drvdata->paddr; - drvdata->buf = NULL; + drvdata->buf = drvdata->vaddr = NULL; } drvdata->reading = false; -- cgit v1.2.3 From f3b8172fe15fbed0d0d33d99780e122213e00684 Mon Sep 17 00:00:00 2001 From: Suzuki K Poulose Date: Tue, 14 Jun 2016 11:17:14 -0600 Subject: coresight: Fix erroneous memset in tmc_read_unprepare_etr At the end of a trace collection, we try to clear the entire buffer and enable the ETR back if it was already enabled. But, we would have adjusted the drvdata->buf to point to the beginning of the trace data in the trace buffer @drvdata->vaddr. So, the following code which clears the buffer is dangerous and can cause crashes, like below : memset(drvdata->buf, 0, drvdata->size); Unable to handle kernel paging request at virtual address ffffff800a145000 pgd = ffffffc974726000 *pgd=00000009f3e91003, *pud=00000009f3e91003, *pmd=0000000000000000 PREEMPT SMP Modules linked in: CPU: 4 PID: 1692 Comm: dd Not tainted 4.7.0-rc2+ #1721 Hardware name: ARM Juno development board (r0) (DT) task: ffffffc9734a0080 ti: ffffffc974460000 task.ti: ffffffc974460000 PC is at __memset+0x1ac/0x200 LR is at tmc_read_unprepare_etr+0x144/0x1bc pc : [] lr : [] pstate: 200001c5 ... [] __memset+0x1ac/0x200 [] tmc_release+0x90/0x94 [] __fput+0xa8/0x1ec [] ____fput+0xc/0x14 [] task_work_run+0xb0/0xe4 [] do_notify_resume+0x64/0x6c [] work_pending+0x10/0x14 Code: 91010108 54ffff4a 8b040108 cb050042 (d50b7428) Since we clear the buffer anyway in the following call to tmc_etr_enable_hw(), remove the erroneous memset(). Fixes: commit de5461970b3e9e1 ("coresight: tmc: allocating memory when needed") Cc: Mathieu Poirier Signed-off-by: Suzuki K Poulose Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-tmc-etr.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index 3369d7a80a51..688be9e060fc 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -300,13 +300,10 @@ int tmc_read_unprepare_etr(struct tmc_drvdata *drvdata) if (local_read(&drvdata->mode) == CS_MODE_SYSFS) { /* * The trace run will continue with the same allocated trace - * buffer. As such zero-out the buffer so that we don't end - * up with stale data. - * - * Since the tracer is still enabled drvdata::buf - * can't be NULL. + * buffer. The trace buffer is cleared in tmc_etr_enable_hw(), + * so we don't have to explicitly clear it. Also, since the + * tracer is still enabled drvdata::buf can't be NULL. */ - memset(drvdata->buf, 0, drvdata->size); tmc_etr_enable_hw(drvdata); } else { /* -- cgit v1.2.3 From 5014e904681ddbdf663bb20f134eb053ddccb181 Mon Sep 17 00:00:00 2001 From: Suzuki K Poulose Date: Fri, 6 May 2016 15:35:50 +0100 Subject: coresight: Handle build path error Enabling a component via sysfs (echo 1 > enable_source), would trigger building a path from the enabled sources to the sink. If there is an error in the process (e.g, sink not enabled or the device (CPU corresponding to ETM) is not online), we never report failure, except for leaving a message in the dmesg. Do proper error checking for the build path and return the error. Before: $ echo 0 > /sys/devices/system/cpu/cpu2/online $ echo 1 > /sys/devices/cs_etm/cpu2/enable_source $ echo $? 0 After: $ echo 0 > /sys/devices/system/cpu/cpu2/online $ echo 1 > /sys/devices/cs_etm/cpu2/enable_source -bash: echo: write error: No such device or address Signed-off-by: Suzuki K Poulose Acked-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c index 0fdaaf4a8994..d08d1ab9bba5 100644 --- a/drivers/hwtracing/coresight/coresight.c +++ b/drivers/hwtracing/coresight/coresight.c @@ -425,6 +425,7 @@ out: struct list_head *coresight_build_path(struct coresight_device *csdev) { struct list_head *path; + int rc; path = kzalloc(sizeof(struct list_head), GFP_KERNEL); if (!path) @@ -432,9 +433,10 @@ struct list_head *coresight_build_path(struct coresight_device *csdev) INIT_LIST_HEAD(path); - if (_coresight_build_path(csdev, path)) { + rc = _coresight_build_path(csdev, path); + if (rc) { kfree(path); - path = NULL; + return ERR_PTR(rc); } return path; @@ -507,8 +509,9 @@ int coresight_enable(struct coresight_device *csdev) goto out; path = coresight_build_path(csdev); - if (!path) { + if (IS_ERR(path)) { pr_err("building path(s) failed\n"); + ret = PTR_ERR(path); goto out; } -- cgit v1.2.3 From 8f50b8e57442d28e41bb736c173d8a2490549a82 Mon Sep 17 00:00:00 2001 From: "Ocquidant, Sebastien" Date: Wed, 15 Jun 2016 13:47:35 +0200 Subject: memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing In the omap gpmc driver it can be noticed that GPMC_CONFIG4_OEEXTRADELAY is overwritten by the WEEXTRADELAY value from the device tree and GPMC_CONFIG4_WEEXTRADELAY is not updated by the value from the device tree. As a consequence, the memory accesses cannot be configured properly when the extra delay are needed for OE and WE. Fix the update of GPMC_CONFIG4_WEEXTRADELAY with the value from the device tree file and prevents GPMC_CONFIG4_OEXTRADELAY being overwritten by the WEXTRADELAY value from the device tree. Cc: stable@vger.kernel.org Signed-off-by: Ocquidant, Sebastien Signed-off-by: Roger Quadros --- drivers/memory/omap-gpmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index af4884ba6b7c..15508df24e5d 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -398,7 +398,7 @@ static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p) gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4, GPMC_CONFIG4_OEEXTRADELAY, p->oe_extra_delay); gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4, - GPMC_CONFIG4_OEEXTRADELAY, p->we_extra_delay); + GPMC_CONFIG4_WEEXTRADELAY, p->we_extra_delay); gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6, GPMC_CONFIG6_CYCLE2CYCLESAMECSEN, p->cycle2cyclesamecsen); -- cgit v1.2.3 From 79ee2e8f730411a30b271d5f9cdeae189fa66174 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 16 Jun 2016 19:03:11 +0530 Subject: PM / OPP: Add 'UNKNOWN' status for shared_opp in struct opp_table dev_pm_opp_get_sharing_cpus() returns 0 even in the case when the OPP core doesn't know whether or not the table is shared. It works on the majority of platforms, where the OPP table is never created before invoking the function and then -ENODEV is returned by it. But in the case of one platform (Jetson TK1) at least, the situation is a bit different. The OPP table has been created (somehow) before dev_pm_opp_get_sharing_cpus() is called and it returns 0. Its caller treats that as 'the CPUs don't share OPPs' and that leads to degraded performance. Fix this by converting 'shared_opp' in struct opp_table to an enum and making dev_pm_opp_get_sharing_cpus() return -EINVAL in case when the value of that field is "access unknown", so that the caller can handle it accordingly (cpufreq-dt considers that as 'all CPUs share the table', for example). Fixes: 6f707daa3833 "PM / OPP: Add dev_pm_opp_get_sharing_cpus()" Reported-and-tested-by: Alexandre Courbot Signed-off-by: Viresh Kumar [ rjw : Subject & changelog ] Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp/cpu.c | 12 +++++++++--- drivers/base/power/opp/of.c | 10 ++++++++-- drivers/base/power/opp/opp.h | 8 +++++++- 3 files changed, 24 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c index 83d6e7ba1a34..8c3434bdb26d 100644 --- a/drivers/base/power/opp/cpu.c +++ b/drivers/base/power/opp/cpu.c @@ -211,7 +211,7 @@ int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, } /* Mark opp-table as multiple CPUs are sharing it now */ - opp_table->shared_opp = true; + opp_table->shared_opp = OPP_TABLE_ACCESS_SHARED; } unlock: mutex_unlock(&opp_table_lock); @@ -227,7 +227,8 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus); * * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev. * - * Returns -ENODEV if OPP table isn't already present. + * Returns -ENODEV if OPP table isn't already present and -EINVAL if the OPP + * table's status is access-unknown. * * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks @@ -249,9 +250,14 @@ int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) goto unlock; } + if (opp_table->shared_opp == OPP_TABLE_ACCESS_UNKNOWN) { + ret = -EINVAL; + goto unlock; + } + cpumask_clear(cpumask); - if (opp_table->shared_opp) { + if (opp_table->shared_opp == OPP_TABLE_ACCESS_SHARED) { list_for_each_entry(opp_dev, &opp_table->dev_list, node) cpumask_set_cpu(opp_dev->dev->id, cpumask); } else { diff --git a/drivers/base/power/opp/of.c b/drivers/base/power/opp/of.c index 94d2010558e3..1dfd3dd92624 100644 --- a/drivers/base/power/opp/of.c +++ b/drivers/base/power/opp/of.c @@ -34,7 +34,10 @@ static struct opp_table *_managed_opp(const struct device_node *np) * But the OPPs will be considered as shared only if the * OPP table contains a "opp-shared" property. */ - return opp_table->shared_opp ? opp_table : NULL; + if (opp_table->shared_opp == OPP_TABLE_ACCESS_SHARED) + return opp_table; + + return NULL; } } @@ -353,7 +356,10 @@ static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np) } opp_table->np = opp_np; - opp_table->shared_opp = of_property_read_bool(opp_np, "opp-shared"); + if (of_property_read_bool(opp_np, "opp-shared")) + opp_table->shared_opp = OPP_TABLE_ACCESS_SHARED; + else + opp_table->shared_opp = OPP_TABLE_ACCESS_EXCLUSIVE; mutex_unlock(&opp_table_lock); diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h index 20f3be22e060..fabd5ca1a083 100644 --- a/drivers/base/power/opp/opp.h +++ b/drivers/base/power/opp/opp.h @@ -119,6 +119,12 @@ struct opp_device { #endif }; +enum opp_table_access { + OPP_TABLE_ACCESS_UNKNOWN = 0, + OPP_TABLE_ACCESS_EXCLUSIVE = 1, + OPP_TABLE_ACCESS_SHARED = 2, +}; + /** * struct opp_table - Device opp structure * @node: table node - contains the devices with OPPs that @@ -166,7 +172,7 @@ struct opp_table { /* For backward compatibility with v1 bindings */ unsigned int voltage_tolerance_v1; - bool shared_opp; + enum opp_table_access shared_opp; struct dev_pm_opp *suspend_opp; unsigned int *supported_hw; -- cgit v1.2.3 From 362761299eea7dfc3a4870551de36e08758b9254 Mon Sep 17 00:00:00 2001 From: Marcin Niestroj Date: Tue, 14 Jun 2016 15:29:24 +0200 Subject: power_supply: tps65217-charger: Fix NULL deref during property export This bug leads to: [ 1.906411] Unable to handle kernel NULL pointer dereference at virtual address 0000000c [ 1.914878] pgd = c0004000 [ 1.917786] [0000000c] *pgd=00000000 [ 1.921536] Internal error: Oops: 5 [#1] SMP ARM [ 1.926357] Modules linked in: [ 1.929556] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.4.5 #18 [ 1.936006] Hardware name: Generic AM33XX (Flattened Device Tree) [ 1.942383] Workqueue: events power_supply_changed_work [ 1.947842] task: de2c41c0 ti: de2c8000 task.ti: de2c8000 [ 1.953483] PC is at tps65217_ac_get_property+0x14/0x28 [ 1.958937] LR is at tps65217_ac_get_property+0x10/0x28 Driver was trying to use drv_data in property get handler. However drv_data was not set, so it caused NULL pointer dereference. This patch properly sets drv_data during probe by power_supply_config parameter, so the property get handler works as desired. Signed-off-by: Marcin Niestroj Fixes: 3636859b280c ("power_supply: Add support for tps65217-charger") Signed-off-by: Sebastian Reichel --- drivers/power/tps65217_charger.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/power/tps65217_charger.c b/drivers/power/tps65217_charger.c index d9f56730c735..73dfae41def8 100644 --- a/drivers/power/tps65217_charger.c +++ b/drivers/power/tps65217_charger.c @@ -197,6 +197,7 @@ static int tps65217_charger_probe(struct platform_device *pdev) { struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); struct tps65217_charger *charger; + struct power_supply_config cfg = {}; int ret; dev_dbg(&pdev->dev, "%s\n", __func__); @@ -208,9 +209,12 @@ static int tps65217_charger_probe(struct platform_device *pdev) charger->tps = tps; charger->dev = &pdev->dev; + cfg.of_node = pdev->dev.of_node; + cfg.drv_data = charger; + charger->ac = devm_power_supply_register(&pdev->dev, &tps65217_charger_desc, - NULL); + &cfg); if (IS_ERR(charger->ac)) { dev_err(&pdev->dev, "failed: power supply register\n"); return PTR_ERR(charger->ac); -- cgit v1.2.3 From c70410cb91de70707a507ee7beef7021a5a89f0d Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 9 Jun 2016 14:38:50 -0400 Subject: rtl8xxxu: fix typo on variable name, compare against correct variable path_b_ok is being assigned but immediately after path_a_ok is being compared to the value 0x03. This appears to be a typo on the variable name, compare path_b_ok instead. Signed-off-by: Colin Ian King Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c index fe19ace0d6a0..b04cf30f3959 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c @@ -1149,7 +1149,7 @@ static void rtl8192eu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, for (i = 0; i < retry; i++) { path_b_ok = rtl8192eu_rx_iqk_path_b(priv); - if (path_a_ok == 0x03) { + if (path_b_ok == 0x03) { val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2); result[t][6] = (val32 >> 16) & 0x3ff; -- cgit v1.2.3 From 17471c7ba5115ed724d624577b21c166d2194272 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Jun 2016 22:31:10 +0200 Subject: net: sfc: avoid -Wtype-limits warning When building with -Wextra, we get a harmless warning from the EFX_EXTRACT_OWORD32 macro: ethernet/sfc/farch.c: In function 'efx_farch_test_registers': ethernet/sfc/farch.c:119:30: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] ethernet/sfc/farch.c:124:144: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] ethernet/sfc/farch.c:124:392: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] ethernet/sfc/farch.c:124:731: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] The macro and the caller are both correct, but we can avoid the warning by changing the index variable to a signed type. Signed-off-by: Arnd Bergmann Acked-by: Bert Kenward Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/farch.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/farch.c b/drivers/net/ethernet/sfc/farch.c index 133e9e35be9e..4c83739d158f 100644 --- a/drivers/net/ethernet/sfc/farch.c +++ b/drivers/net/ethernet/sfc/farch.c @@ -104,7 +104,8 @@ int efx_farch_test_registers(struct efx_nic *efx, const struct efx_farch_register_test *regs, size_t n_regs) { - unsigned address = 0, i, j; + unsigned address = 0; + int i, j; efx_oword_t mask, imask, original, reg, buf; for (i = 0; i < n_regs; ++i) { -- cgit v1.2.3 From a547224dceed4645139f7eff72ff51adb9938bcb Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 15 Jun 2016 14:42:11 -0700 Subject: mlx4e: Do not attempt to offload VXLAN ports that are unrecognized The mlx4e driver does not support more than one port for VXLAN offload. As such expecting the hardware to offload other ports is invalid since it appears the parsing logic is used to perform Tx checksum and segmentation offloads. Use the vxlan_port number to determine in which cases we can apply the offload and in which cases we can not. Signed-off-by: Alexander Duyck Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 19ceced6736c..a2c25365a8a3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2447,9 +2447,14 @@ static netdev_features_t mlx4_en_features_check(struct sk_buff *skb, * strip that feature if this is an IPv6 encapsulated frame. */ if (skb->encapsulation && - (skb->ip_summed == CHECKSUM_PARTIAL) && - (ip_hdr(skb)->version != 4)) - features &= ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); + (skb->ip_summed == CHECKSUM_PARTIAL)) { + struct mlx4_en_priv *priv = netdev_priv(dev); + + if (!priv->vxlan_port || + (ip_hdr(skb)->version != 4) || + (udp_hdr(skb)->dest != priv->vxlan_port)) + features &= ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); + } return features; } -- cgit v1.2.3 From ce449ba77a2271dce9771fb1f3eb37e4be6a8b81 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Thu, 16 Jun 2016 14:42:50 +0100 Subject: nfp: use correct index to mask link state irq We were using an incorrect define to get the irq vector number. NFP_NET_CFG_LSC is a control BAR offset, LSC interrupt vector index is called NFP_NET_IRQ_LSC_IDX. For machines with less than 30 CPUs this meant that we were disabling/enabling IRQ 0. For bigger hosts we were just playing with the 31st RX/TX interrupt. Fixes: 0ba40af963f0 ("nfp: move link state interrupt request/free calls") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index fa47c14c743a..ba26bb356b8d 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -2015,7 +2015,7 @@ static void nfp_net_open_stack(struct nfp_net *nn) netif_tx_wake_all_queues(nn->netdev); - enable_irq(nn->irq_entries[NFP_NET_CFG_LSC].vector); + enable_irq(nn->irq_entries[NFP_NET_IRQ_LSC_IDX].vector); nfp_net_read_link_status(nn); } @@ -2044,7 +2044,7 @@ static int nfp_net_netdev_open(struct net_device *netdev) NFP_NET_IRQ_LSC_IDX, nn->lsc_handler); if (err) goto err_free_exn; - disable_irq(nn->irq_entries[NFP_NET_CFG_LSC].vector); + disable_irq(nn->irq_entries[NFP_NET_IRQ_LSC_IDX].vector); nn->rx_rings = kcalloc(nn->num_rx_rings, sizeof(*nn->rx_rings), GFP_KERNEL); @@ -2133,7 +2133,7 @@ static void nfp_net_close_stack(struct nfp_net *nn) { unsigned int r; - disable_irq(nn->irq_entries[NFP_NET_CFG_LSC].vector); + disable_irq(nn->irq_entries[NFP_NET_IRQ_LSC_IDX].vector); netif_carrier_off(nn->netdev); nn->link_up = false; -- cgit v1.2.3 From a4c34ff1c029e90e7d5f8dd8d29b0a93b31c3cb2 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 17 Jun 2016 11:29:48 +0200 Subject: iommu/vt-d: Enable QI on all IOMMUs before setting root entry This seems to be required on some X58 chipsets on systems with more than one IOMMU. QI does not work until it is enabled on all IOMMUs in the system. Reported-by: Dheeraj CVR Tested-by: Dheeraj CVR Fixes: 5f0a7f7614a9 ('iommu/vt-d: Make root entry visible for hardware right after allocation') Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index a644d0cec2d8..10700945994e 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -3222,11 +3222,6 @@ static int __init init_dmars(void) } } - iommu_flush_write_buffer(iommu); - iommu_set_root_entry(iommu); - iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL); - iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH); - if (!ecap_pass_through(iommu->ecap)) hw_pass_through = 0; #ifdef CONFIG_INTEL_IOMMU_SVM @@ -3235,6 +3230,18 @@ static int __init init_dmars(void) #endif } + /* + * Now that qi is enabled on all iommus, set the root entry and flush + * caches. This is required on some Intel X58 chipsets, otherwise the + * flush_context function will loop forever and the boot hangs. + */ + for_each_active_iommu(iommu, drhd) { + iommu_flush_write_buffer(iommu); + iommu_set_root_entry(iommu); + iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL); + iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH); + } + if (iommu_pass_through) iommu_identity_mapping |= IDENTMAP_ALL; -- cgit v1.2.3 From 8a092e682f20f193f2070dba2ea1904e95814126 Mon Sep 17 00:00:00 2001 From: Mika Båtsman Date: Fri, 17 Jun 2016 13:31:37 +0300 Subject: regulator: anatop: allow regulator to be in bypass mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bypass support was added in commit d38018f2019c ("regulator: anatop: Add bypass support to digital LDOs"). A check for valid voltage selectors was added in commit da0607c8df5c ("regulator: anatop: Fail on invalid voltage selector") but it also discards all regulators that are in bypass mode. Add check for the bypass setting. Errors below were seen on a Variscite mx6 board. anatop_regulator 20c8000.anatop:regulator-vddcore@140: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddcore@140 failed with error -22 anatop_regulator 20c8000.anatop:regulator-vddsoc@140: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddsoc@140 failed with error -22 Fixes: da0607c8df5c ("regulator: anatop: Fail on invalid voltage selector") Signed-off-by: Mika Båtsman Signed-off-by: Mark Brown --- drivers/regulator/anatop-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 63cd5e68c864..3a6d0290c54c 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -296,7 +296,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) if (!sreg->sel && !strcmp(sreg->name, "vddpu")) sreg->sel = 22; - if (!sreg->sel) { + if (!sreg->bypass && !sreg->sel) { dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n"); return -EINVAL; } -- cgit v1.2.3 From 6762925df4642aec5629f7971ba477d6930f53f7 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 31 May 2016 21:47:17 +0900 Subject: phy: rcar-gen3-usb2: fix unexpected repeat interrupts of VBUS change This patch fixes an issue that the driver is possible to cause unexpected repeat interrupts if a board condition is wrong (e.g. even if the ID pin is as function, a board supplies the VBUS.) The reason why unexpected repeat interrupts happen is: 1) The driver changed the mode to function if it detected the ID pin is high and the VBUS is high. 2) After the driver changed function mode, it disabled the "VBUS control" feature. Then, the VBUS signal will be low. 3) Since the VBUS change interruption happened, the driver checked the ID pin and VBUS. 4) Since VBUS was low, the driver changed the mode to host and enabled the "VBUS control" feature. Then the VBUS signal will be high. 5) Since the VBUS change interruption happened, the driver did 1) above. So, this patch modified the condition in rcar_gen3_device_recognition() to check the ID pin only. Fixes: 1114e2d (phy: rcar-gen3-usb2: change the mode to OTG on the combined channel) Cc: # v4.5+ Reported-by: Simon Horman Signed-off-by: Yoshihiro Shimoda Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-rcar-gen3-usb2.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c index 76bb88f0700a..4be3f5dbbc9f 100644 --- a/drivers/phy/phy-rcar-gen3-usb2.c +++ b/drivers/phy/phy-rcar-gen3-usb2.c @@ -144,12 +144,6 @@ static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch) extcon_set_cable_state_(ch->extcon, EXTCON_USB, true); } -static bool rcar_gen3_check_vbus(struct rcar_gen3_chan *ch) -{ - return !!(readl(ch->base + USB2_ADPCTRL) & - USB2_ADPCTRL_OTGSESSVLD); -} - static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch) { return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG); @@ -157,13 +151,7 @@ static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch) static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch) { - bool is_host = true; - - /* B-device? */ - if (rcar_gen3_check_id(ch) && rcar_gen3_check_vbus(ch)) - is_host = false; - - if (is_host) + if (!rcar_gen3_check_id(ch)) rcar_gen3_init_for_host(ch); else rcar_gen3_init_for_peri(ch); -- cgit v1.2.3 From 075adb8046532d9642f411a92b4f385d04ced24d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 Jun 2016 23:31:47 +0000 Subject: phy: rockchip-dp: fix return value check in rockchip_dp_phy_probe() In case of error, the function devm_kzalloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun Reviewed-by: Heiko Stuebner Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-rockchip-dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c index 793ecb6d87bc..8b267a746576 100644 --- a/drivers/phy/phy-rockchip-dp.c +++ b/drivers/phy/phy-rockchip-dp.c @@ -90,7 +90,7 @@ static int rockchip_dp_phy_probe(struct platform_device *pdev) return -ENODEV; dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL); - if (IS_ERR(dp)) + if (!dp) return -ENOMEM; dp->dev = dev; -- cgit v1.2.3 From 5cf700ac9d50353dc5b8194a57c6f40bf1fc4424 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Mon, 13 Jun 2016 13:45:48 +0200 Subject: phy: phy-sun4i-usb: Fix optional gpios failing probe The interrupt 0 is not a valid interrupt number. In the event where the retrieval of the vbus-det gpio would return null, the gpiod_to_irq callback would return 0, while the current code makes the assumption that it is a valid interrupt, and would go on calling request_irq. Obviously, this would fail, preventing the driver from probing properly, while the vbus and id gpios are optional. Signed-off-by: Quentin Schulz Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index bae54f7a1f48..45f01d6c9ed2 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -645,11 +645,11 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) data->id_det_irq = gpiod_to_irq(data->id_det_gpio); data->vbus_det_irq = gpiod_to_irq(data->vbus_det_gpio); - if ((data->id_det_gpio && data->id_det_irq < 0) || - (data->vbus_det_gpio && data->vbus_det_irq < 0)) + if ((data->id_det_gpio && data->id_det_irq <= 0) || + (data->vbus_det_gpio && data->vbus_det_irq <= 0)) data->phy0_poll = true; - if (data->id_det_irq >= 0) { + if (data->id_det_irq > 0) { ret = devm_request_irq(dev, data->id_det_irq, sun4i_usb_phy0_id_vbus_det_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, @@ -660,7 +660,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) } } - if (data->vbus_det_irq >= 0) { + if (data->vbus_det_irq > 0) { ret = devm_request_irq(dev, data->vbus_det_irq, sun4i_usb_phy0_id_vbus_det_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, -- cgit v1.2.3 From d99cb37828a2fe344ecc95d1fad570bbe447cc06 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 7 Jun 2016 18:14:56 +0100 Subject: phy-sun4i-usb: fix missing __iomem * Fix the missing __iomem attribute in sun4i_usb_phy_write() function. This fixes the following sparse warnings: drivers/phy/phy-sun4i-usb.c:178:39: warning: incorrect type in initializer (different address spaces) drivers/phy/phy-sun4i-usb.c:178:39: expected void *phyctl drivers/phy/phy-sun4i-usb.c:178:39: got void [noderef] * drivers/phy/phy-sun4i-usb.c:185:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:185:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:185:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:189:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:189:24: expected void const volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:189:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:196:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:196:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:196:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:199:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:199:24: expected void const volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:199:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:205:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:205:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:205:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:208:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:208:24: expected void const volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:208:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:210:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:210:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:210:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:212:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:212:24: expected void const volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:212:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:214:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:214:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:214:17: got void *phyctl Signed-off-by: Ben Dooks Acked-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 45f01d6c9ed2..739029430dda 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -175,7 +175,7 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data, { struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy); u32 temp, usbc_bit = BIT(phy->index * 2); - void *phyctl = phy_data->base + phy_data->cfg->phyctl_offset; + void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset; int i; mutex_lock(&phy_data->mutex); -- cgit v1.2.3 From 6c081ff6fd5abd621797570be43d5e3c6acfcd58 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 10 May 2016 11:01:33 +0300 Subject: phy: bcm-ns-usb2: checking the wrong variable We intended to test "usb2->phy" here instead of "dev". Fixes: d3feb4067335 ('phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar') Signed-off-by: Dan Carpenter Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-bcm-ns-usb2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/phy-bcm-ns-usb2.c b/drivers/phy/phy-bcm-ns-usb2.c index 95ab6b2a0de5..58dff80e9386 100644 --- a/drivers/phy/phy-bcm-ns-usb2.c +++ b/drivers/phy/phy-bcm-ns-usb2.c @@ -109,8 +109,8 @@ static int bcm_ns_usb2_probe(struct platform_device *pdev) } usb2->phy = devm_phy_create(dev, NULL, &ops); - if (IS_ERR(dev)) - return PTR_ERR(dev); + if (IS_ERR(usb2->phy)) + return PTR_ERR(usb2->phy); phy_set_drvdata(usb2->phy, usb2); platform_set_drvdata(pdev, usb2); -- cgit v1.2.3 From 79bb71bd1d93197ce227fa167b450b633f30a52b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 15 Jun 2016 22:57:38 +0200 Subject: gpio: make sure gpiod_to_irq() returns negative on NULL desc commit 54d77198fdfbc4f0fe11b4252c1d9c97d51a3264 ("gpio: bail out silently on NULL descriptors") doesn't work for gpiod_to_irq(): drivers assume that NULL descriptors will give negative IRQ numbers in return. It has been pointed out that returning 0 is NO_IRQ and that drivers should be amended to treat this as an error, but that is for the longer term: now let us repair the semantics. Cc: Maxime Ripard Reported-by: Hans de Goede Tested-by: Hans de Goede Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 58d822d7e8da..f39bf05993e7 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2056,7 +2056,14 @@ int gpiod_to_irq(const struct gpio_desc *desc) struct gpio_chip *chip; int offset; - VALIDATE_DESC(desc); + /* + * Cannot VALIDATE_DESC() here as gpiod_to_irq() consumer semantics + * requires this function to not return zero on an invalid descriptor + * but rather a negative error number. + */ + if (!desc || !desc->gdev || !desc->gdev->chip) + return -EINVAL; + chip = desc->gdev->chip; offset = gpio_chip_hwgpio(desc); if (chip->to_irq) { -- cgit v1.2.3 From bfbbe44daf64d0ccf2de123179817f3557fb9237 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 16 Jun 2016 11:55:55 +0200 Subject: gpio: make library immune to error pointers Most functions that take a GPIO descriptor in need to check the descriptor for IS_ERR(). We do this mostly in the VALIDATE_DESC() macro except for the gpiod_to_irq() function which needs special handling. Cc: stable@vger.kernel.org Reported-by: Grygorii Strashko Reviewed-by: Grygorii Strashko Acked-by: Alexandre Courbot Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index f39bf05993e7..570771ed19e6 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1373,8 +1373,12 @@ done: #define VALIDATE_DESC(desc) do { \ if (!desc) \ return 0; \ + if (IS_ERR(desc)) { \ + pr_warn("%s: invalid GPIO (errorpointer)\n", __func__); \ + return PTR_ERR(desc); \ + } \ if (!desc->gdev) { \ - pr_warn("%s: invalid GPIO\n", __func__); \ + pr_warn("%s: invalid GPIO (no device)\n", __func__); \ return -EINVAL; \ } \ if ( !desc->gdev->chip ) { \ @@ -1386,8 +1390,12 @@ done: #define VALIDATE_DESC_VOID(desc) do { \ if (!desc) \ return; \ + if (IS_ERR(desc)) { \ + pr_warn("%s: invalid GPIO (errorpointer)\n", __func__); \ + return; \ + } \ if (!desc->gdev) { \ - pr_warn("%s: invalid GPIO\n", __func__); \ + pr_warn("%s: invalid GPIO (no device)\n", __func__); \ return; \ } \ if (!desc->gdev->chip) { \ @@ -2061,7 +2069,7 @@ int gpiod_to_irq(const struct gpio_desc *desc) * requires this function to not return zero on an invalid descriptor * but rather a negative error number. */ - if (!desc || !desc->gdev || !desc->gdev->chip) + if (!desc || IS_ERR(desc) || !desc->gdev || !desc->gdev->chip) return -EINVAL; chip = desc->gdev->chip; -- cgit v1.2.3 From 76bf3441ad6584ddc3aea1501927f21b21ba3a3a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 7 Jun 2016 17:49:09 +0100 Subject: ata: sata_mv: fix mis-conversion in mv_write_cached_reg() Fix the signed issue in mv_write_cached_reg() where the laddr is assigned from a (long)addr instead of (unsigned long)addr. Fixes the following warnings: drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression Signed-off-by: Ben Dooks Signed-off-by: Tejun Heo --- drivers/ata/sata_mv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index bd74ee555278..745489a1c86a 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -986,7 +986,7 @@ static inline void mv_write_cached_reg(void __iomem *addr, u32 *old, u32 new) * Looks like a lot of fuss, but it avoids an unnecessary * +1 usec read-after-write delay for unaffected registers. */ - laddr = (long)addr & 0xffff; + laddr = (unsigned long)addr & 0xffff; if (laddr >= 0x300 && laddr <= 0x33c) { laddr &= 0x000f; if (laddr == 0x4 || laddr == 0xc) { -- cgit v1.2.3 From 041bf0225552044b85ce7ee7981e790d987d6ceb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Jun 2016 11:30:23 +0300 Subject: drm/amdgpu: missing bounds check in amdgpu_set_pp_force_state() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is no limit on high "idx" can go. It should be less than ARRAY_SIZE(data.states) which is 16. The "data" variable wasn't declared in that scope so I shifted the code around a bit to make it work. Also I made "idx" unsigned. Fixes: f3898ea12fc1 ('drm/amd/powerplay: add some sysfs interfaces for powerplay.') Acked-by: Christian König Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c index 589b36e8c5cf..0e13d80d2a95 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c @@ -270,30 +270,28 @@ static ssize_t amdgpu_set_pp_force_state(struct device *dev, struct drm_device *ddev = dev_get_drvdata(dev); struct amdgpu_device *adev = ddev->dev_private; enum amd_pm_state_type state = 0; - long idx; + unsigned long idx; int ret; if (strlen(buf) == 1) adev->pp_force_state_enabled = false; - else { - ret = kstrtol(buf, 0, &idx); + else if (adev->pp_enabled) { + struct pp_states_info data; - if (ret) { + ret = kstrtoul(buf, 0, &idx); + if (ret || idx >= ARRAY_SIZE(data.states)) { count = -EINVAL; goto fail; } - if (adev->pp_enabled) { - struct pp_states_info data; - amdgpu_dpm_get_pp_num_states(adev, &data); - state = data.states[idx]; - /* only set user selected power states */ - if (state != POWER_STATE_TYPE_INTERNAL_BOOT && - state != POWER_STATE_TYPE_DEFAULT) { - amdgpu_dpm_dispatch_task(adev, - AMD_PP_EVENT_ENABLE_USER_STATE, &state, NULL); - adev->pp_force_state_enabled = true; - } + amdgpu_dpm_get_pp_num_states(adev, &data); + state = data.states[idx]; + /* only set user selected power states */ + if (state != POWER_STATE_TYPE_INTERNAL_BOOT && + state != POWER_STATE_TYPE_DEFAULT) { + amdgpu_dpm_dispatch_task(adev, + AMD_PP_EVENT_ENABLE_USER_STATE, &state, NULL); + adev->pp_force_state_enabled = true; } } fail: -- cgit v1.2.3 From 6982f867e058f0c6c8d3eeb4ef305efd7d7f4c8c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 5 Jun 2016 21:01:18 +0200 Subject: Revert "Staging: drivers: rtl8188eu: use sizeof(*ptr) instead of sizeof(struct)" This reverts commit 99aded71b52c ("Staging: drivers: rtl8188eu: use sizeof(*ptr) instead of sizeof(struct)"). This commit is wrong, as adapt->HalData has a type of "void *", so now we are allocating a much to small struct, which causes the driver to overwrite random memory which leads to a non working driver and various system crashes. Cc: Jacky Boen Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/hal/usb_halinit.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c index 87ea3b844951..363f3a34ddce 100644 --- a/drivers/staging/rtl8188eu/hal/usb_halinit.c +++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c @@ -2072,7 +2072,8 @@ void rtl8188eu_set_hal_ops(struct adapter *adapt) { struct hal_ops *halfunc = &adapt->HalFunc; - adapt->HalData = kzalloc(sizeof(*adapt->HalData), GFP_KERNEL); + + adapt->HalData = kzalloc(sizeof(struct hal_data_8188e), GFP_KERNEL); if (!adapt->HalData) DBG_88E("cant not alloc memory for HAL DATA\n"); -- cgit v1.2.3 From bc8201e3e1885614a5cd3a5f70a79d08f99152fd Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 5 Jun 2016 21:01:19 +0200 Subject: Revert "Staging: rtl8188eu: rtw_efuse: Use sizeof type *pointer instead of sizeof type." This reverts commit b5e12ec38331 ("Staging: rtl8188eu: rtw_efuse: Use sizeof type *pointer instead of sizeof type."). This commit is wrong, the rtw_malloc2d helper function takes the size of the array elements as its 3th argument, whereas sizeof(*eFuseWord) gives the size of a pointer instead of the size of a u16. Since sizeof(void *) > sizeof(u16) this has no adverse effects, but it is still wrong. Cc: Sandhya Bankar Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/core/rtw_efuse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8188eu/core/rtw_efuse.c b/drivers/staging/rtl8188eu/core/rtw_efuse.c index c17870cddb5b..fbce1f7e68ca 100644 --- a/drivers/staging/rtl8188eu/core/rtw_efuse.c +++ b/drivers/staging/rtl8188eu/core/rtw_efuse.c @@ -102,7 +102,7 @@ efuse_phymap_to_logical(u8 *phymap, u16 _offset, u16 _size_byte, u8 *pbuf) if (!efuseTbl) return; - eFuseWord = (u16 **)rtw_malloc2d(EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(*eFuseWord)); + eFuseWord = (u16 **)rtw_malloc2d(EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(u16)); if (!eFuseWord) { DBG_88E("%s: alloc eFuseWord fail!\n", __func__); goto eFuseWord_failed; -- cgit v1.2.3 From 0b10029d826ed8c18a5f9d2f4abfa415d15cd1d3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 17 Jun 2016 10:17:17 -0400 Subject: drm/amdgpu: fix num_rbs exposed to userspace (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This was accidently broken for harvest cards when the code was refactored for Polaris support. v2: multiply by shader engines. Noticed by Nicolai. Reviewed-by: Nicolai Hähnle Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index 40a23704a981..d851ea15059f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -447,7 +447,8 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file dev_info.max_memory_clock = adev->pm.default_mclk * 10; } dev_info.enabled_rb_pipes_mask = adev->gfx.config.backend_enable_mask; - dev_info.num_rb_pipes = adev->gfx.config.num_rbs; + dev_info.num_rb_pipes = adev->gfx.config.max_backends_per_se * + adev->gfx.config.max_shader_engines; dev_info.num_hw_gfx_contexts = adev->gfx.config.max_hw_contexts; dev_info._pad = 0; dev_info.ids_flags = 0; -- cgit v1.2.3 From 8c5122e45a10a9262f872b53f151a592e870f905 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 8 Jun 2016 17:28:29 -0600 Subject: IB/mlx4: Properly initialize GRH TClass and FlowLabel in AHs When this code was reworked for IBoE support the order of assignments for the sl_tclass_flowlabel got flipped around resulting in TClass & FlowLabel being permanently set to 0 in the packet headers. This breaks IB routers that rely on these headers, but only affects kernel users - libmlx4 does this properly for user space. Cc: stable@vger.kernel.org Fixes: fa417f7b520e ("IB/mlx4: Add support for IBoE") Signed-off-by: Jason Gunthorpe Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/ah.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/ah.c b/drivers/infiniband/hw/mlx4/ah.c index 105246fba2e7..5fc623362731 100644 --- a/drivers/infiniband/hw/mlx4/ah.c +++ b/drivers/infiniband/hw/mlx4/ah.c @@ -47,6 +47,7 @@ static struct ib_ah *create_ib_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr, ah->av.ib.port_pd = cpu_to_be32(to_mpd(pd)->pdn | (ah_attr->port_num << 24)); ah->av.ib.g_slid = ah_attr->src_path_bits; + ah->av.ib.sl_tclass_flowlabel = cpu_to_be32(ah_attr->sl << 28); if (ah_attr->ah_flags & IB_AH_GRH) { ah->av.ib.g_slid |= 0x80; ah->av.ib.gid_index = ah_attr->grh.sgid_index; @@ -64,7 +65,6 @@ static struct ib_ah *create_ib_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr, !(1 << ah->av.ib.stat_rate & dev->caps.stat_rate_support)) --ah->av.ib.stat_rate; } - ah->av.ib.sl_tclass_flowlabel = cpu_to_be32(ah_attr->sl << 28); return &ah->ibah; } -- cgit v1.2.3 From 37e07cdafc111dfb7ce27e70e73d900d7cf2920c Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 10 Jun 2016 11:08:25 -0700 Subject: IB/cma: Make the code easier to verify Static source code analysis tools like smatch cannot handle functions that lock or not lock a mutex depending on the value of the arguments. Hence inline the function cma_disable_callback(). Additionally, this patch realizes a small performance optimization by reducing the number of mutex_lock() and mutex_unlock() calls in the modified functions. With this patch applied smatch no longer complains about source file cma.c. Without this patch smatch reports the following for this source file: drivers/infiniband/core/cma.c:1959: cma_req_handler() warn: inconsistent returns 'mutex:&listen_id->handler_mutex'. Locked on: line 1880 line 1959 Unlocked on: line 1941 drivers/infiniband/core/cma.c:2112: iw_conn_req_handler() warn: inconsistent returns 'mutex:&listen_id->handler_mutex'. Locked on: line 2048 Unlocked on: line 2112 Signed-off-by: Bart Van Assche Cc: Sean Hefty Cc: Steve Wise Cc: Leon Romanovsky Acked-by: Sean Hefty Reviewed-by: Steve Wise Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/cma.c | 54 +++++++++++++++++++++---------------------- 1 file changed, 26 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index f0c91ba3178a..c58ee771baaa 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -708,17 +708,6 @@ static void cma_deref_id(struct rdma_id_private *id_priv) complete(&id_priv->comp); } -static int cma_disable_callback(struct rdma_id_private *id_priv, - enum rdma_cm_state state) -{ - mutex_lock(&id_priv->handler_mutex); - if (id_priv->state != state) { - mutex_unlock(&id_priv->handler_mutex); - return -EINVAL; - } - return 0; -} - struct rdma_cm_id *rdma_create_id(struct net *net, rdma_cm_event_handler event_handler, void *context, enum rdma_port_space ps, @@ -1671,11 +1660,12 @@ static int cma_ib_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) struct rdma_cm_event event; int ret = 0; + mutex_lock(&id_priv->handler_mutex); if ((ib_event->event != IB_CM_TIMEWAIT_EXIT && - cma_disable_callback(id_priv, RDMA_CM_CONNECT)) || + id_priv->state != RDMA_CM_CONNECT) || (ib_event->event == IB_CM_TIMEWAIT_EXIT && - cma_disable_callback(id_priv, RDMA_CM_DISCONNECT))) - return 0; + id_priv->state != RDMA_CM_DISCONNECT)) + goto out; memset(&event, 0, sizeof event); switch (ib_event->event) { @@ -1870,7 +1860,7 @@ static int cma_check_req_qp_type(struct rdma_cm_id *id, struct ib_cm_event *ib_e static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) { - struct rdma_id_private *listen_id, *conn_id; + struct rdma_id_private *listen_id, *conn_id = NULL; struct rdma_cm_event event; struct net_device *net_dev; int offset, ret; @@ -1884,9 +1874,10 @@ static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) goto net_dev_put; } - if (cma_disable_callback(listen_id, RDMA_CM_LISTEN)) { + mutex_lock(&listen_id->handler_mutex); + if (listen_id->state != RDMA_CM_LISTEN) { ret = -ECONNABORTED; - goto net_dev_put; + goto err1; } memset(&event, 0, sizeof event); @@ -1976,8 +1967,9 @@ static int cma_iw_handler(struct iw_cm_id *iw_id, struct iw_cm_event *iw_event) struct sockaddr *laddr = (struct sockaddr *)&iw_event->local_addr; struct sockaddr *raddr = (struct sockaddr *)&iw_event->remote_addr; - if (cma_disable_callback(id_priv, RDMA_CM_CONNECT)) - return 0; + mutex_lock(&id_priv->handler_mutex); + if (id_priv->state != RDMA_CM_CONNECT) + goto out; memset(&event, 0, sizeof event); switch (iw_event->event) { @@ -2029,6 +2021,7 @@ static int cma_iw_handler(struct iw_cm_id *iw_id, struct iw_cm_event *iw_event) return ret; } +out: mutex_unlock(&id_priv->handler_mutex); return ret; } @@ -2039,13 +2032,15 @@ static int iw_conn_req_handler(struct iw_cm_id *cm_id, struct rdma_cm_id *new_cm_id; struct rdma_id_private *listen_id, *conn_id; struct rdma_cm_event event; - int ret; + int ret = -ECONNABORTED; struct sockaddr *laddr = (struct sockaddr *)&iw_event->local_addr; struct sockaddr *raddr = (struct sockaddr *)&iw_event->remote_addr; listen_id = cm_id->context; - if (cma_disable_callback(listen_id, RDMA_CM_LISTEN)) - return -ECONNABORTED; + + mutex_lock(&listen_id->handler_mutex); + if (listen_id->state != RDMA_CM_LISTEN) + goto out; /* Create a new RDMA id for the new IW CM ID */ new_cm_id = rdma_create_id(listen_id->id.route.addr.dev_addr.net, @@ -3216,8 +3211,9 @@ static int cma_sidr_rep_handler(struct ib_cm_id *cm_id, struct ib_cm_sidr_rep_event_param *rep = &ib_event->param.sidr_rep_rcvd; int ret = 0; - if (cma_disable_callback(id_priv, RDMA_CM_CONNECT)) - return 0; + mutex_lock(&id_priv->handler_mutex); + if (id_priv->state != RDMA_CM_CONNECT) + goto out; memset(&event, 0, sizeof event); switch (ib_event->event) { @@ -3673,12 +3669,13 @@ static int cma_ib_mc_handler(int status, struct ib_sa_multicast *multicast) struct rdma_id_private *id_priv; struct cma_multicast *mc = multicast->context; struct rdma_cm_event event; - int ret; + int ret = 0; id_priv = mc->id_priv; - if (cma_disable_callback(id_priv, RDMA_CM_ADDR_BOUND) && - cma_disable_callback(id_priv, RDMA_CM_ADDR_RESOLVED)) - return 0; + mutex_lock(&id_priv->handler_mutex); + if (id_priv->state != RDMA_CM_ADDR_BOUND && + id_priv->state != RDMA_CM_ADDR_RESOLVED) + goto out; if (!status) status = cma_set_qkey(id_priv, be32_to_cpu(multicast->rec.qkey)); @@ -3720,6 +3717,7 @@ static int cma_ib_mc_handler(int status, struct ib_sa_multicast *multicast) return 0; } +out: mutex_unlock(&id_priv->handler_mutex); return 0; } -- cgit v1.2.3 From b4ba6633ea153266429f16614029ab1578815390 Mon Sep 17 00:00:00 2001 From: Jubin John Date: Thu, 9 Jun 2016 07:51:08 -0700 Subject: IB/hfi1: Fix credit return threshold adjustment The credit return threshold adjustment on mtu change algorithm does not take into account all the kernel send contexts that are assigned per VL. Use the pio send context map to adjust the credit return thresholds for all the allocated and assigned kernel send contexts based on the MTU adjustment per VL. The pio send context map can be changed dynamically based on the actual number of operational vls which is set by the fabric manager. When this happens update the credit return threshold values for all the remapped kernel send contexts. Reviewed-by: Dennis Dalessandro Reviewed-by: Mike Marciniszyn Reviewed-by: Jianxin Xiong Signed-off-by: Jubin John Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 7 +++++-- drivers/infiniband/hw/hfi1/pio.c | 24 ++++++++++++++++++++++-- 2 files changed, 27 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index 81619fbb5842..c533d4422399 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -9777,7 +9777,7 @@ static void set_send_length(struct hfi1_pportdata *ppd) u64 len1 = 0, len2 = (((dd->vld[15].mtu + max_hb) >> 2) & SEND_LEN_CHECK1_LEN_VL15_MASK) << SEND_LEN_CHECK1_LEN_VL15_SHIFT; - int i; + int i, j; u32 thres; for (i = 0; i < ppd->vls_supported; i++) { @@ -9801,7 +9801,10 @@ static void set_send_length(struct hfi1_pportdata *ppd) sc_mtu_to_threshold(dd->vld[i].sc, dd->vld[i].mtu, dd->rcd[0]->rcvhdrqentsize)); - sc_set_cr_threshold(dd->vld[i].sc, thres); + for (j = 0; j < INIT_SC_PER_VL; j++) + sc_set_cr_threshold( + pio_select_send_context_vl(dd, j, i), + thres); } thres = min(sc_percent_to_threshold(dd->vld[15].sc, 50), sc_mtu_to_threshold(dd->vld[15].sc, diff --git a/drivers/infiniband/hw/hfi1/pio.c b/drivers/infiniband/hw/hfi1/pio.c index d5edb1afbb8f..e0e1ff2a0c72 100644 --- a/drivers/infiniband/hw/hfi1/pio.c +++ b/drivers/infiniband/hw/hfi1/pio.c @@ -1797,6 +1797,21 @@ static void pio_map_rcu_callback(struct rcu_head *list) pio_map_free(m); } +/* + * Set credit return threshold for the kernel send context + */ +static void set_threshold(struct hfi1_devdata *dd, int scontext, int i) +{ + u32 thres; + + thres = min(sc_percent_to_threshold(dd->kernel_send_context[scontext], + 50), + sc_mtu_to_threshold(dd->kernel_send_context[scontext], + dd->vld[i].mtu, + dd->rcd[0]->rcvhdrqentsize)); + sc_set_cr_threshold(dd->kernel_send_context[scontext], thres); +} + /* * pio_map_init - called when #vls change * @dd: hfi1_devdata @@ -1872,11 +1887,16 @@ int pio_map_init(struct hfi1_devdata *dd, u8 port, u8 num_vls, u8 *vl_scontexts) if (!newmap->map[i]) goto bail; newmap->map[i]->mask = (1 << ilog2(sz)) - 1; - /* assign send contexts */ + /* + * assign send contexts and + * adjust credit return threshold + */ for (j = 0; j < sz; j++) { - if (dd->kernel_send_context[scontext]) + if (dd->kernel_send_context[scontext]) { newmap->map[i]->ksc[j] = dd->kernel_send_context[scontext]; + set_threshold(dd, scontext, i); + } if (++scontext >= first_scontext + vl_scontexts[i]) /* wrap back to first send context */ -- cgit v1.2.3 From 96605672a4172f6e31f31ce29ee27fef68011de0 Mon Sep 17 00:00:00 2001 From: Brian Welty Date: Thu, 9 Jun 2016 07:51:14 -0700 Subject: IB/rdmavt: Correct required callback functions for MODIFY_QP Functions required for MODIFY_PORT were incorrectly being required for MODIFY_QP. Reviewed-by: Dennis Dalessandro Signed-off-by: Brian Welty Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rdmavt/vt.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rdmavt/vt.c b/drivers/infiniband/sw/rdmavt/vt.c index e1cc2cc42f25..30c4fda7a05a 100644 --- a/drivers/infiniband/sw/rdmavt/vt.c +++ b/drivers/infiniband/sw/rdmavt/vt.c @@ -501,9 +501,7 @@ static noinline int check_support(struct rvt_dev_info *rdi, int verb) !rdi->driver_f.quiesce_qp || !rdi->driver_f.notify_error_qp || !rdi->driver_f.mtu_from_qp || - !rdi->driver_f.mtu_to_path_mtu || - !rdi->driver_f.shut_down_port || - !rdi->driver_f.cap_mask_chg) + !rdi->driver_f.mtu_to_path_mtu) return -EINVAL; break; -- cgit v1.2.3 From 501edc42446e89fa67fb6ef2c9afb50792c310c0 Mon Sep 17 00:00:00 2001 From: Brian Welty Date: Thu, 9 Jun 2016 07:51:20 -0700 Subject: IB/rdmavt: Correct warning during QPN allocation Correct calculation of the low order bits which should be unset based on use of qos_shift parameter when assigning QPN. Reviewed-by: Dennis Dalessandro Signed-off-by: Brian Welty Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rdmavt/qp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c index 7de5134bec85..c3e0d614f68b 100644 --- a/drivers/infiniband/sw/rdmavt/qp.c +++ b/drivers/infiniband/sw/rdmavt/qp.c @@ -369,8 +369,8 @@ static int alloc_qpn(struct rvt_dev_info *rdi, struct rvt_qpn_table *qpt, /* wrap to first map page, invert bit 0 */ offset = qpt->incr | ((offset & 1) ^ 1); } - /* there can be no bits at shift and below */ - WARN_ON(offset & (rdi->dparms.qos_shift - 1)); + /* there can be no set bits in low-order QoS bits */ + WARN_ON(offset & (BIT(rdi->dparms.qos_shift) - 1)); qpn = mk_qpn(qpt, map, offset); } -- cgit v1.2.3 From c3c64a951cbdb6096d02dcc339a9c807ce1e976a Mon Sep 17 00:00:00 2001 From: Jubin John Date: Thu, 9 Jun 2016 07:51:27 -0700 Subject: IB/hfi1: Increase packet egress timeout The current value of 500us for the packet egress timeout is too small which causes the host to declare failure on draining packets too early and unnecessarily bounces the link. Increase this to 50ms taking into account the switch packet discard timer default and the worst case per-VL package drainage rate. Reviewed-by: Dean Luick Signed-off-by: Jubin John Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/pio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/pio.c b/drivers/infiniband/hw/hfi1/pio.c index e0e1ff2a0c72..d4022450b73f 100644 --- a/drivers/infiniband/hw/hfi1/pio.c +++ b/drivers/infiniband/hw/hfi1/pio.c @@ -995,7 +995,7 @@ static void sc_wait_for_packet_egress(struct send_context *sc, int pause) /* counter is reset if occupancy count changes */ if (reg != reg_prev) loop = 0; - if (loop > 500) { + if (loop > 50000) { /* timed out - bounce the link */ dd_dev_err(dd, "%s: context %u(%u) timeout waiting for packets to egress, remaining count %u, bouncing link\n", -- cgit v1.2.3 From ca2f30a0a6786e6b08eeb8abb2bbb8df58709d6e Mon Sep 17 00:00:00 2001 From: Ira Weiny Date: Thu, 9 Jun 2016 07:51:33 -0700 Subject: IB/hfi1: Prevent context loss If a context has already been assigned to an FD, prevent another assignment. Reviewed-by: Dennis Dalessandro Signed-off-by: Ira Weiny Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/file_ops.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/file_ops.c b/drivers/infiniband/hw/hfi1/file_ops.c index 7a5b0e676cc7..c702a009608f 100644 --- a/drivers/infiniband/hw/hfi1/file_ops.c +++ b/drivers/infiniband/hw/hfi1/file_ops.c @@ -203,6 +203,9 @@ static long hfi1_file_ioctl(struct file *fp, unsigned int cmd, switch (cmd) { case HFI1_IOCTL_ASSIGN_CTXT: + if (uctxt) + return -EINVAL; + if (copy_from_user(&uinfo, (struct hfi1_user_info __user *)arg, sizeof(uinfo))) -- cgit v1.2.3 From 5e9ef24619486213223053678eb9175630ef6bf9 Mon Sep 17 00:00:00 2001 From: Ira Weiny Date: Thu, 9 Jun 2016 07:51:39 -0700 Subject: IB/qib: Prevent context loss If a context has already been assigned to an FD, prevent another assignment. Reviewed-by: Dennis Dalessandro Signed-off-by: Ira Weiny Signed-off-by: Doug Ledford --- drivers/infiniband/hw/qib/qib_file_ops.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c index ff946d5f59e4..382466a90da7 100644 --- a/drivers/infiniband/hw/qib/qib_file_ops.c +++ b/drivers/infiniband/hw/qib/qib_file_ops.c @@ -2178,6 +2178,11 @@ static ssize_t qib_write(struct file *fp, const char __user *data, switch (cmd.type) { case QIB_CMD_ASSIGN_CTXT: + if (rcd) { + ret = -EINVAL; + goto bail; + } + ret = qib_assign_ctxt(fp, &cmd.cmd.user_info); if (ret) goto bail; -- cgit v1.2.3 From 93dd0a097859a174817ea94ec55bfc29c5706454 Mon Sep 17 00:00:00 2001 From: Tadeusz Struk Date: Thu, 9 Jun 2016 07:51:45 -0700 Subject: IB/hfi1: Fix potential NULL ptr dereference This fixes potential NULL ptr dereference because IS_ERR(dd) doesn't handle NULL. Fix the issue by initializing the pointer with a not NULL error code. Reviewed-by: Dennis Dalessandro Signed-off-by: Tadeusz Struk Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c index 0d28a5a40fae..eed971ccd2a1 100644 --- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -1383,7 +1383,7 @@ static void postinit_cleanup(struct hfi1_devdata *dd) static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int ret = 0, j, pidx, initfail; - struct hfi1_devdata *dd = NULL; + struct hfi1_devdata *dd = ERR_PTR(-EINVAL); struct hfi1_pportdata *ppd; /* First, lock the non-writable module parameters */ -- cgit v1.2.3 From c078f0dd01b73c70b92a660cb1ce3dfc3cbf2903 Mon Sep 17 00:00:00 2001 From: Tadeusz Struk Date: Thu, 9 Jun 2016 07:51:51 -0700 Subject: IB/hfi1: Fix potential buffer overflow This fixes potential buffer overflow because the sprintf function doesn't check buffer boundaries. Use snprintf instead. Reviewed-by: Dennis Dalessandro Signed-off-by: Tadeusz Struk Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/qsfp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/qsfp.c b/drivers/infiniband/hw/hfi1/qsfp.c index 2441669f0817..9fb561682c66 100644 --- a/drivers/infiniband/hw/hfi1/qsfp.c +++ b/drivers/infiniband/hw/hfi1/qsfp.c @@ -579,7 +579,8 @@ int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len) if (ppd->qsfp_info.cache_valid) { if (QSFP_IS_CU(cache[QSFP_MOD_TECH_OFFS])) - sprintf(lenstr, "%dM ", cache[QSFP_MOD_LEN_OFFS]); + snprintf(lenstr, sizeof(lenstr), "%dM ", + cache[QSFP_MOD_LEN_OFFS]); power_byte = cache[QSFP_MOD_PWR_OFFS]; sofar += scnprintf(buf + sofar, len - sofar, "PWR:%.3sW\n", -- cgit v1.2.3 From 3ec5fa28c9ea54fb172859d2612a0be6526e4dc1 Mon Sep 17 00:00:00 2001 From: Sebastian Sanchez Date: Thu, 9 Jun 2016 07:51:57 -0700 Subject: IB/hfi1: Remove FULL_MGMT_P_KEY from pkey table at link up FULL_MGMT_P_KEY doesn't get cleared from the pkey table at link bounce because the link down and link bounce code paths are different when moving a QSFP cable on a switch. This causes an HFI unit connected to a switch to try to be initialized to an FM node when the QSFP cable is moved from a MgmtAllowed=NO port to a MgmtAllowed=YES port and back to a MgmtAllowed=NO port. Remove FULL_MGMT_P_KEY from pkey table at link up. Reviewed-by: Dean Luick Signed-off-by: Sebastian Sanchez Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index c533d4422399..3487fdfb2c63 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -1037,7 +1037,7 @@ static void dc_shutdown(struct hfi1_devdata *); static void dc_start(struct hfi1_devdata *); static int qos_rmt_entries(struct hfi1_devdata *dd, unsigned int *mp, unsigned int *np); -static void remove_full_mgmt_pkey(struct hfi1_pportdata *ppd); +static void clear_full_mgmt_pkey(struct hfi1_pportdata *ppd); /* * Error interrupt table entry. This is used as input to the interrupt @@ -6962,8 +6962,6 @@ void handle_link_down(struct work_struct *work) } reset_neighbor_info(ppd); - if (ppd->mgmt_allowed) - remove_full_mgmt_pkey(ppd); /* disable the port */ clear_rcvctrl(ppd->dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK); @@ -7072,10 +7070,12 @@ static void add_full_mgmt_pkey(struct hfi1_pportdata *ppd) (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); } -static void remove_full_mgmt_pkey(struct hfi1_pportdata *ppd) +static void clear_full_mgmt_pkey(struct hfi1_pportdata *ppd) { - ppd->pkeys[2] = 0; - (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); + if (ppd->pkeys[2] != 0) { + ppd->pkeys[2] = 0; + (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); + } } /* @@ -9168,6 +9168,13 @@ int start_link(struct hfi1_pportdata *ppd) return 0; } + /* + * FULL_MGMT_P_KEY is cleared from the pkey table, so that the + * pkey table can be configured properly if the HFI unit is connected + * to switch port with MgmtAllowed=NO + */ + clear_full_mgmt_pkey(ppd); + return set_link_state(ppd, HLS_DN_POLL); } -- cgit v1.2.3 From 34d351f8ddf6dee24d739c4b00a4404e48089a04 Mon Sep 17 00:00:00 2001 From: Sebastian Sanchez Date: Thu, 9 Jun 2016 07:52:03 -0700 Subject: IB/hfi1: Send a pkey change event on driver pkey update Swapping a cable from a "Mgmt Allowed=No" switch port to a "Mgmt Allowed=Yes" switch port doesn't send a pkey change notification. Therefore, the link doesn't become active as the oib_utils layer uses an old pkey table cache. Fix by ensuring the pkey change notification is sent when the table is changed both explicitly by the FM and implicitly by the driver via a cable swap. Reviewed-by: Mike Marciniszyn Signed-off-by: Sebastian Sanchez Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 2 ++ drivers/infiniband/hw/hfi1/mad.c | 19 ++++++++++++------- drivers/infiniband/hw/hfi1/mad.h | 2 ++ 3 files changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index 3487fdfb2c63..f5de85178055 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -7068,6 +7068,7 @@ static void add_full_mgmt_pkey(struct hfi1_pportdata *ppd) __func__, ppd->pkeys[2], FULL_MGMT_P_KEY); ppd->pkeys[2] = FULL_MGMT_P_KEY; (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); + hfi1_event_pkey_change(ppd->dd, ppd->port); } static void clear_full_mgmt_pkey(struct hfi1_pportdata *ppd) @@ -7075,6 +7076,7 @@ static void clear_full_mgmt_pkey(struct hfi1_pportdata *ppd) if (ppd->pkeys[2] != 0) { ppd->pkeys[2] = 0; (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); + hfi1_event_pkey_change(ppd->dd, ppd->port); } } diff --git a/drivers/infiniband/hw/hfi1/mad.c b/drivers/infiniband/hw/hfi1/mad.c index 219029576ba0..fca07a1d6c28 100644 --- a/drivers/infiniband/hw/hfi1/mad.c +++ b/drivers/infiniband/hw/hfi1/mad.c @@ -78,6 +78,16 @@ static inline void clear_opa_smp_data(struct opa_smp *smp) memset(data, 0, size); } +void hfi1_event_pkey_change(struct hfi1_devdata *dd, u8 port) +{ + struct ib_event event; + + event.event = IB_EVENT_PKEY_CHANGE; + event.device = &dd->verbs_dev.rdi.ibdev; + event.element.port_num = port; + ib_dispatch_event(&event); +} + static void send_trap(struct hfi1_ibport *ibp, void *data, unsigned len) { struct ib_mad_send_buf *send_buf; @@ -1418,15 +1428,10 @@ static int set_pkeys(struct hfi1_devdata *dd, u8 port, u16 *pkeys) } if (changed) { - struct ib_event event; - (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); - - event.event = IB_EVENT_PKEY_CHANGE; - event.device = &dd->verbs_dev.rdi.ibdev; - event.element.port_num = port; - ib_dispatch_event(&event); + hfi1_event_pkey_change(dd, port); } + return 0; } diff --git a/drivers/infiniband/hw/hfi1/mad.h b/drivers/infiniband/hw/hfi1/mad.h index 55ee08675333..8b734aaae88a 100644 --- a/drivers/infiniband/hw/hfi1/mad.h +++ b/drivers/infiniband/hw/hfi1/mad.h @@ -434,4 +434,6 @@ struct sc2vlnt { COUNTER_MASK(1, 3) | \ COUNTER_MASK(1, 4)) +void hfi1_event_pkey_change(struct hfi1_devdata *dd, u8 port); + #endif /* _HFI1_MAD_H */ -- cgit v1.2.3 From 083d5ad1a924e79ecf92be37cce9f1efa5c1d240 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 14 Jun 2016 13:41:07 -0700 Subject: usbip: rate limit get_frame_number message MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's annoying to constantly see the same "Not yet implemented" message over and over with nothing able to be done about it, so rate limit it for now to keep user's logs "clean". Reported-by: Lars Täuber Tested-by: Lars Täuber Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/vhci_hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index fca51105974e..2e0450bec1b1 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -941,7 +941,7 @@ static void vhci_stop(struct usb_hcd *hcd) static int vhci_get_frame_number(struct usb_hcd *hcd) { - pr_err("Not yet implemented\n"); + dev_err_ratelimited(&hcd->self.root_hub->dev, "Not yet implemented\n"); return 0; } -- cgit v1.2.3 From 3a4955111ad46a022f05b51f91306d864f989625 Mon Sep 17 00:00:00 2001 From: William Breathitt Gray Date: Fri, 27 May 2016 18:08:27 -0400 Subject: isa: Allow ISA-style drivers on modern systems Several modern devices, such as PC/104 cards, are expected to run on modern systems via an ISA bus interface. Since ISA is a legacy interface for most modern architectures, ISA support should remain disabled in general. Support for ISA-style drivers should be enabled on a per driver basis. To allow ISA-style drivers on modern systems, this patch introduces the ISA_BUS_API and ISA_BUS Kconfig options. The ISA bus driver will now build conditionally on the ISA_BUS_API Kconfig option, which defaults to the legacy ISA Kconfig option. The ISA_BUS Kconfig option allows the ISA_BUS_API Kconfig option to be selected on architectures which do not enable ISA (e.g. X86_64). The ISA_BUS Kconfig option is currently only implemented for X86 architectures. Other architectures may have their own ISA_BUS Kconfig options added as required. Reviewed-by: Guenter Roeck Signed-off-by: William Breathitt Gray Acked-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- arch/Kconfig | 3 +++ arch/x86/Kconfig | 9 +++++++++ drivers/base/Makefile | 2 +- include/linux/isa.h | 2 +- 4 files changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/arch/Kconfig b/arch/Kconfig index d794384a0404..e9734796531f 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -606,6 +606,9 @@ config HAVE_ARCH_HASH file which provides platform-specific implementations of some functions in or fs/namei.c. +config ISA_BUS_API + def_bool ISA + # # ABI hall of shame # diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 0a7b885964ba..d9a94da0c29f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2439,6 +2439,15 @@ config PCI_CNB20LE_QUIRK source "drivers/pci/Kconfig" +config ISA_BUS + bool "ISA-style bus support on modern systems" if EXPERT + select ISA_BUS_API + help + Enables ISA-style drivers on modern systems. This is necessary to + support PC/104 devices on X86_64 platforms. + + If unsure, say N. + # x86_64 have no ISA slots, but can have ISA-style DMA. config ISA_DMA_API bool "ISA-style DMA support" if (X86_64 && EXPERT) diff --git a/drivers/base/Makefile b/drivers/base/Makefile index 6b2a84e7f2be..2609ba20b396 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_DMA_CMA) += dma-contiguous.o obj-y += power/ obj-$(CONFIG_HAS_DMA) += dma-mapping.o obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o -obj-$(CONFIG_ISA) += isa.o +obj-$(CONFIG_ISA_BUS_API) += isa.o obj-$(CONFIG_FW_LOADER) += firmware_class.o obj-$(CONFIG_NUMA) += node.o obj-$(CONFIG_MEMORY_HOTPLUG_SPARSE) += memory.o diff --git a/include/linux/isa.h b/include/linux/isa.h index 5ab85281230b..384ab9b7d79a 100644 --- a/include/linux/isa.h +++ b/include/linux/isa.h @@ -22,7 +22,7 @@ struct isa_driver { #define to_isa_driver(x) container_of((x), struct isa_driver, driver) -#ifdef CONFIG_ISA +#ifdef CONFIG_ISA_BUS_API int isa_register_driver(struct isa_driver *, unsigned int); void isa_unregister_driver(struct isa_driver *); #else -- cgit v1.2.3 From f4ae916912b4969916ebb275995c745b01cb432c Mon Sep 17 00:00:00 2001 From: William Breathitt Gray Date: Fri, 27 May 2016 18:08:56 -0400 Subject: gpio: Allow PC/104 devices on X86_64 With the introduction of the ISA_BUS_API Kconfig option, ISA-style drivers may be built for X86_64 architectures. This patch changes the ISA Kconfig option dependency of the PC/104 drivers to ISA_BUS_API, thus allowing them to build for X86_64 as they are expected to. Cc: Alexandre Courbot Reviewed-by: Guenter Roeck Signed-off-by: William Breathitt Gray Acked-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman --- drivers/gpio/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index a116609b1914..cebcb405812e 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -531,7 +531,7 @@ menu "Port-mapped I/O GPIO drivers" config GPIO_104_DIO_48E tristate "ACCES 104-DIO-48E GPIO support" - depends on ISA + depends on ISA_BUS_API select GPIOLIB_IRQCHIP help Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E, @@ -541,7 +541,7 @@ config GPIO_104_DIO_48E config GPIO_104_IDIO_16 tristate "ACCES 104-IDIO-16 GPIO support" - depends on ISA + depends on ISA_BUS_API select GPIOLIB_IRQCHIP help Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16, @@ -552,7 +552,7 @@ config GPIO_104_IDIO_16 config GPIO_104_IDI_48 tristate "ACCES 104-IDI-48 GPIO support" - depends on ISA + depends on ISA_BUS_API select GPIOLIB_IRQCHIP help Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A, @@ -628,7 +628,7 @@ config GPIO_TS5500 config GPIO_WS16C48 tristate "WinSystems WS16C48 GPIO support" - depends on ISA + depends on ISA_BUS_API select GPIOLIB_IRQCHIP help Enables GPIO support for the WinSystems WS16C48. The base port -- cgit v1.2.3 From 75897b7c5ee9f9a23ec7863d4f8758bc041ba656 Mon Sep 17 00:00:00 2001 From: William Breathitt Gray Date: Fri, 27 May 2016 18:09:08 -0400 Subject: iio: stx104: Allow build for X86_64 With the introduction of the ISA_BUS_API Kconfig option, ISA-style drivers may be built for X86_64 architectures. This patch changes the ISA Kconfig option dependency of the Apex Embedded Systems STX104 DAC driver to ISA_BUS_API, thus allowing it to build for X86_64 as it is expected to. Cc: Hartmut Knaack Cc: Lars-Peter Clausen Cc: Peter Meerwald-Stadler Reviewed-by: Guenter Roeck Signed-off-by: William Breathitt Gray Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/dac/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index e63b957c985f..f7c71da42f15 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -247,7 +247,7 @@ config MCP4922 config STX104 tristate "Apex Embedded Systems STX104 DAC driver" - depends on X86 && ISA + depends on X86 && ISA_BUS_API help Say yes here to build support for the 2-channel DAC on the Apex Embedded Systems STX104 integrated analog PC/104 card. The base port -- cgit v1.2.3 From b87b8ff760d51b33b4e23d7f3a42ded55a668735 Mon Sep 17 00:00:00 2001 From: William Breathitt Gray Date: Fri, 27 May 2016 18:09:27 -0400 Subject: watchdog: ebc-c384_wdt: Allow build for X86_64 With the introduction of the ISA_BUS_API Kconfig option, ISA-style drivers may be built for X86_64 architectures. This patch changes the ISA Kconfig option dependency of the WinSystems EBC-C384 watchdog timer driver to ISA_BUS_API, thus allowing it to build for X86_64 as it is expected to. Cc: Wim Van Sebroeck Reviewed-by: Guenter Roeck Signed-off-by: William Breathitt Gray Signed-off-by: Greg Kroah-Hartman --- drivers/watchdog/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index b54f26c55dfd..b4b3e256491b 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -746,7 +746,7 @@ config ALIM7101_WDT config EBC_C384_WDT tristate "WinSystems EBC-C384 Watchdog Timer" - depends on X86 && ISA + depends on X86 && ISA_BUS_API select WATCHDOG_CORE help Enables watchdog timer support for the watchdog timer on the -- cgit v1.2.3 From 32a5a0c047343b11f581f663a2309cf43d13466f Mon Sep 17 00:00:00 2001 From: William Breathitt Gray Date: Wed, 11 May 2016 17:01:40 -0400 Subject: isa: Call isa_bus_init before dependent ISA bus drivers register The isa_bus_init function must be called before drivers which utilize the ISA bus driver are registered. A race condition for initilization exists if device_initcall is used (the isa_bus_init callback is placed in the same initcall level as dependent drivers which use module_init). This patch ensures that isa_bus_init is called first by utilizing postcore_initcall in favor of device_initcall. Fixes: a5117ba7da37 ("[PATCH] Driver model: add ISA bus") Cc: Rene Herman Signed-off-by: William Breathitt Gray Signed-off-by: Greg Kroah-Hartman --- drivers/base/isa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/isa.c b/drivers/base/isa.c index 91dba65d7264..cd6ccdcf9df0 100644 --- a/drivers/base/isa.c +++ b/drivers/base/isa.c @@ -180,4 +180,4 @@ static int __init isa_bus_init(void) return error; } -device_initcall(isa_bus_init); +postcore_initcall(isa_bus_init); -- cgit v1.2.3 From 63dcdd35c1552ca0c911e98ba3389a0729a457f4 Mon Sep 17 00:00:00 2001 From: Nogah Frankel Date: Fri, 17 Jun 2016 15:09:05 +0200 Subject: mlxsw: spectrum: Don't count internal TX header bytes to stats Stop the SW TX counter from counting the TX header bytes since they are not being sent out. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Reviewed-by: Ido Schimmel Signed-off-by: Nogah Frankel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 6f9e3ddff4a8..660429ebfbe1 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -408,7 +408,11 @@ static netdev_tx_t mlxsw_sp_port_xmit(struct sk_buff *skb, } mlxsw_sp_txhdr_construct(skb, &tx_info); - len = skb->len; + /* TX header is consumed by HW on the way so we shouldn't count its + * bytes as being sent. + */ + len = skb->len - MLXSW_TXHDR_LEN; + /* Due to a race we might fail here because of a full queue. In that * unlikely case we simply drop the packet. */ -- cgit v1.2.3 From 4e239fac7c6b9d703e83c81b52ec9fec00c50129 Mon Sep 17 00:00:00 2001 From: Nogah Frankel Date: Fri, 17 Jun 2016 15:09:06 +0200 Subject: mlxsw: switchx2: Don't count internal TX header bytes to stats Stop the SW TX counter from counting the TX header bytes since they are not being sent out. Fixes: e577516b9db3 ("mlxsw: Fix use-after-free bug in mlxsw_sx_port_xmit") Signed-off-by: Nogah Frankel Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/switchx2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/switchx2.c b/drivers/net/ethernet/mellanox/mlxsw/switchx2.c index 3842eab9449a..25f658b3849a 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/switchx2.c +++ b/drivers/net/ethernet/mellanox/mlxsw/switchx2.c @@ -316,7 +316,10 @@ static netdev_tx_t mlxsw_sx_port_xmit(struct sk_buff *skb, } } mlxsw_sx_txhdr_construct(skb, &tx_info); - len = skb->len; + /* TX header is consumed by HW on the way so we shouldn't count its + * bytes as being sent. + */ + len = skb->len - MLXSW_TXHDR_LEN; /* Due to a race we might fail here because of a full queue. In that * unlikely case we simply drop the packet. */ -- cgit v1.2.3 From a9836cbb5fc885d3b8f3b91b2d47525f7269dec1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 17 Jun 2016 18:15:30 +0200 Subject: net: tilegx: use correct timespec64 type The conversion to the 64-bit time based ptp methods left two instances of 'struct timespec' in place. This is harmless because 64-bit architectures define timespec64 as timespec, and this driver is not used on 32-bit machines. However, using 'struct timespec64' directly is obviously the right thing to do, and will help us remove 'struct timespec' in the future. Signed-off-by: Arnd Bergmann Fixes: b9acf24f779c ("ptp: tilegx: convert to the 64 bit get/set time methods.") Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/ethernet/tile/tilegx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c index 0a15acc075b3..11213a38c795 100644 --- a/drivers/net/ethernet/tile/tilegx.c +++ b/drivers/net/ethernet/tile/tilegx.c @@ -462,7 +462,7 @@ static void tile_tx_timestamp(struct sk_buff *skb, int instance) if (unlikely((shtx->tx_flags & SKBTX_HW_TSTAMP) != 0)) { struct mpipe_data *md = &mpipe_data[instance]; struct skb_shared_hwtstamps shhwtstamps; - struct timespec ts; + struct timespec64 ts; shtx->tx_flags |= SKBTX_IN_PROGRESS; gxio_mpipe_get_timestamp(&md->context, &ts); @@ -886,9 +886,9 @@ static struct ptp_clock_info ptp_mpipe_caps = { /* Sync mPIPE's timestamp up with Linux system time and register PTP clock. */ static void register_ptp_clock(struct net_device *dev, struct mpipe_data *md) { - struct timespec ts; + struct timespec64 ts; - getnstimeofday(&ts); + ktime_get_ts64(&ts); gxio_mpipe_set_timestamp(&md->context, &ts); mutex_init(&md->ptp_lock); -- cgit v1.2.3 From 053ea640818812313892ec4f370f5cfac42fd355 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 18 Jun 2016 00:54:44 +0200 Subject: hwmon: (dell-smm) Fail in ioctl I8K_BIOS_VERSION when bios version is not a number MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ABI of I8K_BIOS_VERSION ioctl can return only number. But new BIOS versions contain also other characters, which does not fit into that ABI. So in case of non digit values return -EINVAL. Reported-by: Mario Limonciello Signed-off-by: Pali Rohár Signed-off-by: Guenter Roeck --- drivers/hwmon/dell-smm-hwmon.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c index c43318d3416e..480b2fae9541 100644 --- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -35,6 +35,7 @@ #include #include #include +#include #include @@ -387,6 +388,10 @@ i8k_ioctl_unlocked(struct file *fp, unsigned int cmd, unsigned long arg) switch (cmd) { case I8K_BIOS_VERSION: + if (!isdigit(bios_version[0]) || !isdigit(bios_version[1]) || + !isdigit(bios_version[2])) + return -EINVAL; + val = (bios_version[0] << 16) | (bios_version[1] << 8) | bios_version[2]; break; -- cgit v1.2.3 From 7613663cc186f8f3c50279390ddc60286758001c Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 18 Jun 2016 00:54:45 +0200 Subject: hwmon: (dell-smm) Restrict fan control and serial number to CAP_SYS_ADMIN by default MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For security reasons ordinary user must not be able to control fan speed via /proc/i8k by default. Some malicious software running under "nobody" user could be able to turn fan off and cause HW problems. So this patch changes default value of "restricted" parameter to 1. Also restrict reading of DMI_PRODUCT_SERIAL from /proc/i8k via "restricted" parameter. It is because non root user cannot read DMI_PRODUCT_SERIAL from sysfs file /sys/class/dmi/id/product_serial. Old non secure behaviour of file /proc/i8k can be achieved by loading this module with "restricted" parameter set to 0. Note that this patch has effects only for kernels compiled with CONFIG_I8K and only for file /proc/i8k. Hwmon interface provided by this driver was not changed and root access for setting fan speed was needed also before. Reported-by: Mario Limonciello Signed-off-by: Pali Rohár Cc: stable@vger.kernel.org # will need backport Signed-off-by: Guenter Roeck --- drivers/hwmon/dell-smm-hwmon.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c index 480b2fae9541..c8bd3fdd0710 100644 --- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -67,6 +67,7 @@ static DEFINE_MUTEX(i8k_mutex); static char bios_version[4]; +static char bios_machineid[16]; static struct device *i8k_hwmon_dev; static u32 i8k_hwmon_flags; static uint i8k_fan_mult = I8K_FAN_MULT; @@ -95,13 +96,13 @@ module_param(ignore_dmi, bool, 0); MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match"); #if IS_ENABLED(CONFIG_I8K) -static bool restricted; +static bool restricted = true; module_param(restricted, bool, 0); -MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set"); +MODULE_PARM_DESC(restricted, "Restrict fan control and serial number to CAP_SYS_ADMIN (default: 1)"); static bool power_status; module_param(power_status, bool, 0600); -MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k"); +MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k (default: 0)"); #endif static uint fan_mult; @@ -397,9 +398,11 @@ i8k_ioctl_unlocked(struct file *fp, unsigned int cmd, unsigned long arg) break; case I8K_MACHINE_ID: - memset(buff, 0, 16); - strlcpy(buff, i8k_get_dmi_data(DMI_PRODUCT_SERIAL), - sizeof(buff)); + if (restricted && !capable(CAP_SYS_ADMIN)) + return -EPERM; + + memset(buff, 0, sizeof(buff)); + strlcpy(buff, bios_machineid, sizeof(buff)); break; case I8K_FN_STATUS: @@ -516,7 +519,7 @@ static int i8k_proc_show(struct seq_file *seq, void *offset) seq_printf(seq, "%s %s %s %d %d %d %d %d %d %d\n", I8K_PROC_FMT, bios_version, - i8k_get_dmi_data(DMI_PRODUCT_SERIAL), + (restricted && !capable(CAP_SYS_ADMIN)) ? "-1" : bios_machineid, cpu_temp, left_fan, right_fan, left_speed, right_speed, ac_power, fn_key); @@ -985,6 +988,8 @@ static int __init i8k_probe(void) strlcpy(bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION), sizeof(bios_version)); + strlcpy(bios_machineid, i8k_get_dmi_data(DMI_PRODUCT_SERIAL), + sizeof(bios_machineid)); /* * Get SMM Dell signature -- cgit v1.2.3 From 2744d2fde00dc8bcc3679eb72c81a63058e90faa Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 18 Jun 2016 00:54:46 +0200 Subject: hwmon: (dell-smm) Disallow fan_type() calls on broken machines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some Dell machines have especially broken SMM or BIOS which cause that once fan_type() is called then CPU fan speed going randomly up and down. And for fixing this behaviour reboot is required. So this patch creates fan_type blacklist of affected Dell machines and disallow fan_type() call on them to prevent that erratic behaviour. Old blacklist which disabled loading driver on some machines added in commits a4b45b25f18d ("hwmon: (dell-smm) Blacklist Dell Studio XPS 8100") and 6220f4ebd7b4 ("hwmon: (dell-smm) Blacklist Dell Studio XPS 8000") were moved to FAN_TYPE blacklist. Reported-by: Jan C Peters Signed-off-by: Pali Rohár Link: https://bugzilla.kernel.org/show_bug.cgi?id=100121 Cc: stable@vger.kernel.org # v4.0+, will need backport Signed-off-by: Guenter Roeck --- drivers/hwmon/dell-smm-hwmon.c | 36 +++++++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c index c8bd3fdd0710..4bbc58714868 100644 --- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -73,6 +73,7 @@ static u32 i8k_hwmon_flags; static uint i8k_fan_mult = I8K_FAN_MULT; static uint i8k_pwm_mult; static uint i8k_fan_max = I8K_FAN_HIGH; +static bool disallow_fan_type_call; #define I8K_HWMON_HAVE_TEMP1 (1 << 0) #define I8K_HWMON_HAVE_TEMP2 (1 << 1) @@ -241,6 +242,9 @@ static int i8k_get_fan_type(int fan) { struct smm_regs regs = { .eax = I8K_SMM_GET_FAN_TYPE, }; + if (disallow_fan_type_call) + return -EINVAL; + regs.ebx = fan & 0xff; return i8k_smm(®s) ? : regs.eax & 0xff; } @@ -726,6 +730,9 @@ static struct attribute *i8k_attrs[] = { static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr, int index) { + if (disallow_fan_type_call && + (index == 9 || index == 12)) + return 0; if (index >= 0 && index <= 1 && !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP1)) return 0; @@ -937,12 +944,14 @@ static struct dmi_system_id i8k_dmi_table[] __initdata = { MODULE_DEVICE_TABLE(dmi, i8k_dmi_table); -static struct dmi_system_id i8k_blacklist_dmi_table[] __initdata = { +/* + * On some machines once I8K_SMM_GET_FAN_TYPE is issued then CPU fan speed + * randomly going up and down due to bug in Dell SMM or BIOS. Here is blacklist + * of affected Dell machines for which we disallow I8K_SMM_GET_FAN_TYPE call. + * See bug: https://bugzilla.kernel.org/show_bug.cgi?id=100121 + */ +static struct dmi_system_id i8k_blacklist_fan_type_dmi_table[] __initdata = { { - /* - * CPU fan speed going up and down on Dell Studio XPS 8000 - * for unknown reasons. - */ .ident = "Dell Studio XPS 8000", .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), @@ -950,16 +959,19 @@ static struct dmi_system_id i8k_blacklist_dmi_table[] __initdata = { }, }, { - /* - * CPU fan speed going up and down on Dell Studio XPS 8100 - * for unknown reasons. - */ .ident = "Dell Studio XPS 8100", .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Studio XPS 8100"), }, }, + { + .ident = "Dell Inspiron 580", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Inspiron 580 "), + }, + }, { } }; @@ -974,8 +986,7 @@ static int __init i8k_probe(void) /* * Get DMI information */ - if (!dmi_check_system(i8k_dmi_table) || - dmi_check_system(i8k_blacklist_dmi_table)) { + if (!dmi_check_system(i8k_dmi_table)) { if (!ignore_dmi && !force) return -ENODEV; @@ -986,6 +997,9 @@ static int __init i8k_probe(void) i8k_get_dmi_data(DMI_BIOS_VERSION)); } + if (dmi_check_system(i8k_blacklist_fan_type_dmi_table)) + disallow_fan_type_call = true; + strlcpy(bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION), sizeof(bios_version)); strlcpy(bios_machineid, i8k_get_dmi_data(DMI_PRODUCT_SERIAL), -- cgit v1.2.3 From d90efc9ee0df3f13f248aaf47086b1e0ed6035ae Mon Sep 17 00:00:00 2001 From: Yakir Yang Date: Wed, 8 Jun 2016 10:13:27 -0400 Subject: drm/exynos: dp: Fix NULL pointer dereference due uninitialized connector Commit 3424e3a4f844 ("drm: bridge: analogix/dp: split exynos dp driver to bridge directory") split the Exynos DP core driver into a core driver and a bridge driver for the Analogix chip since that is also used by Rockchip. But the change introduced a regression causing a NULL pointer dereference when trying to access an uninitialized connector in the driver .get_modes: Fix this by instead of having a connector struct for both the Exynos and Analogix drivers, just use the connector initialized in the bridge driver. Fixes: 3424e3a4f844 ("drm: bridge: analogix/dp: split exynos dp driver to bridge directory") Reported-by: Marc Zyngier Signed-off-by: Yakir Yang Tested-by: Marc Zyngier Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_dp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c index 468498e3fec1..4c1fb3f8b5a6 100644 --- a/drivers/gpu/drm/exynos/exynos_dp.c +++ b/drivers/gpu/drm/exynos/exynos_dp.c @@ -34,7 +34,7 @@ struct exynos_dp_device { struct drm_encoder encoder; - struct drm_connector connector; + struct drm_connector *connector; struct drm_bridge *ptn_bridge; struct drm_device *drm_dev; struct device *dev; @@ -70,7 +70,7 @@ static int exynos_dp_poweroff(struct analogix_dp_plat_data *plat_data) static int exynos_dp_get_modes(struct analogix_dp_plat_data *plat_data) { struct exynos_dp_device *dp = to_dp(plat_data); - struct drm_connector *connector = &dp->connector; + struct drm_connector *connector = dp->connector; struct drm_display_mode *mode; int num_modes = 0; @@ -103,6 +103,7 @@ static int exynos_dp_bridge_attach(struct analogix_dp_plat_data *plat_data, int ret; drm_connector_register(connector); + dp->connector = connector; /* Pre-empt DP connector creation if there's a bridge */ if (dp->ptn_bridge) { -- cgit v1.2.3 From 5e0b37634cbb6bae69b7b15e1ea5f054dfaaa413 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 30 May 2016 20:20:22 -0400 Subject: drm/exynos: fimd: don't set .has_hw_trigger in s3c6400 driver data The field value is only checked in fimd_setup_trigger() if .trg_type is I80_HW_TRG so there's no point in setting this field for the s3c6400 if is never going to be used since .trg_type is not set. Signed-off-by: Javier Martinez Canillas Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 3efe1aa89416..1c23a8ff5e83 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -120,7 +120,6 @@ static struct fimd_driver_data s3c64xx_fimd_driver_data = { .timing_base = 0x0, .has_clksel = 1, .has_limited_fmt = 1, - .has_hw_trigger = 1, }; static struct fimd_driver_data exynos3_fimd_driver_data = { -- cgit v1.2.3 From e0d7461ceb5bb9b50e534262eb23e92deaaae6f1 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 2 Jun 2016 10:20:10 -0400 Subject: drm/exynos: don't use HW trigger for Exynos5420/5422/5800 Commit a6f75aa161c5 ("drm/exynos: fimd: add HW trigger support") added hardware trigger support to the FIMD controller driver. But this broke the display in at least the Exynos5800 Peach Pi Chromebook. So until the issue is fixed, avoid using HW trigger for the Exynos5420 based boards and use SW trigger as it was before the mentioned commit. Signed-off-by: Javier Martinez Canillas Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 1c23a8ff5e83..f10030ff00e6 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -170,14 +170,11 @@ static struct fimd_driver_data exynos5420_fimd_driver_data = { .lcdblk_vt_shift = 24, .lcdblk_bypass_shift = 15, .lcdblk_mic_bypass_shift = 11, - .trg_type = I80_HW_TRG, .has_shadowcon = 1, .has_vidoutcon = 1, .has_vtsel = 1, .has_mic_bypass = 1, .has_dp_clk = 1, - .has_hw_trigger = 1, - .has_trigger_per_te = 1, }; struct fimd_context { -- cgit v1.2.3 From ed4dc2718d3510f0fa5e6794f47b98549848f656 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Wed, 25 May 2016 14:42:56 +0200 Subject: drm/exynos: g2d: drop the _REG postfix from the stride defines This makes the defines consistent with the rest. Signed-off-by: Tobias Jakobi Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 493552368295..8564c3da0d22 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -48,13 +48,13 @@ /* registers for base address */ #define G2D_SRC_BASE_ADDR 0x0304 -#define G2D_SRC_STRIDE_REG 0x0308 +#define G2D_SRC_STRIDE 0x0308 #define G2D_SRC_COLOR_MODE 0x030C #define G2D_SRC_LEFT_TOP 0x0310 #define G2D_SRC_RIGHT_BOTTOM 0x0314 #define G2D_SRC_PLANE2_BASE_ADDR 0x0318 #define G2D_DST_BASE_ADDR 0x0404 -#define G2D_DST_STRIDE_REG 0x0408 +#define G2D_DST_STRIDE 0x0408 #define G2D_DST_COLOR_MODE 0x040C #define G2D_DST_LEFT_TOP 0x0410 #define G2D_DST_RIGHT_BOTTOM 0x0414 @@ -563,7 +563,7 @@ static enum g2d_reg_type g2d_get_reg_type(int reg_offset) switch (reg_offset) { case G2D_SRC_BASE_ADDR: - case G2D_SRC_STRIDE_REG: + case G2D_SRC_STRIDE: case G2D_SRC_COLOR_MODE: case G2D_SRC_LEFT_TOP: case G2D_SRC_RIGHT_BOTTOM: @@ -573,7 +573,7 @@ static enum g2d_reg_type g2d_get_reg_type(int reg_offset) reg_type = REG_TYPE_SRC_PLANE2; break; case G2D_DST_BASE_ADDR: - case G2D_DST_STRIDE_REG: + case G2D_DST_STRIDE: case G2D_DST_COLOR_MODE: case G2D_DST_LEFT_TOP: case G2D_DST_RIGHT_BOTTOM: @@ -968,8 +968,8 @@ static int g2d_check_reg_offset(struct device *dev, } else buf_info->types[reg_type] = BUF_TYPE_GEM; break; - case G2D_SRC_STRIDE_REG: - case G2D_DST_STRIDE_REG: + case G2D_SRC_STRIDE: + case G2D_DST_STRIDE: if (for_addr) goto err; -- cgit v1.2.3 From f0fcf43f285cdbc1bbc372919d68aea0cf4483d6 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Wed, 25 May 2016 14:35:41 +0200 Subject: drm/exynos: remove superfluous inclusions of fbdev header Neither of these files issue any fbdev related calls. Signed-off-by: Tobias Jakobi Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos7_drm_decon.c | 1 - drivers/gpu/drm/exynos/exynos_drm_core.c | 1 - drivers/gpu/drm/exynos/exynos_drm_fimd.c | 1 - 3 files changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c index f6223f907c15..7f9901b7777b 100644 --- a/drivers/gpu/drm/exynos/exynos7_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c @@ -31,7 +31,6 @@ #include "exynos_drm_plane.h" #include "exynos_drm_drv.h" #include "exynos_drm_fb.h" -#include "exynos_drm_fbdev.h" #include "exynos_drm_iommu.h" /* diff --git a/drivers/gpu/drm/exynos/exynos_drm_core.c b/drivers/gpu/drm/exynos/exynos_drm_core.c index 011211e4167d..edbd98ff293e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_core.c +++ b/drivers/gpu/drm/exynos/exynos_drm_core.c @@ -15,7 +15,6 @@ #include #include "exynos_drm_drv.h" #include "exynos_drm_crtc.h" -#include "exynos_drm_fbdev.h" static LIST_HEAD(exynos_drm_subdrv_list); diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index f10030ff00e6..d47216488985 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -30,7 +30,6 @@ #include "exynos_drm_drv.h" #include "exynos_drm_fb.h" -#include "exynos_drm_fbdev.h" #include "exynos_drm_crtc.h" #include "exynos_drm_plane.h" #include "exynos_drm_iommu.h" -- cgit v1.2.3 From 41abbf5afa51136bcb2aeefc80bf5c3a005d0aa3 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Wed, 25 May 2016 14:30:07 +0200 Subject: drm/exynos: use logical AND in exynos_drm_plane_check_size() The current bitwise AND should result in the same assembler but this is what the code is actually supposed to do. Signed-off-by: Tobias Jakobi Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c index 55f1d37c666a..77f12c00abf9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c @@ -242,7 +242,7 @@ exynos_drm_plane_check_size(const struct exynos_drm_plane_config *config, state->v_ratio == (1 << 15)) height_ok = true; - if (width_ok & height_ok) + if (width_ok && height_ok) return 0; DRM_DEBUG_KMS("scaling mode is not supported"); -- cgit v1.2.3 From e6bd89232b4a4c9282da1ac8bdd798c2a30d9a46 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:11 +0300 Subject: qed: Correct default vlan behavior When no vlan filter is configured, firmware has a configurable default on whether to pass only untagged packets or all packets regardless of their tagging. Driver currently doesn't set this field in the necessary ramrod, causing the default to always be 'receive all'. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 8fba87dd48af..7c199a94cbfc 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -72,6 +72,7 @@ int qed_sp_eth_vport_start(struct qed_hwfn *p_hwfn, p_ramrod->mtu = cpu_to_le16(p_params->mtu); p_ramrod->inner_vlan_removal_en = p_params->remove_inner_vlan; p_ramrod->drop_ttl0_en = p_params->drop_ttl0; + p_ramrod->untagged = p_params->only_untagged; SET_FIELD(rx_mode, ETH_VPORT_RX_MODE_UCAST_DROP_ALL, 1); SET_FIELD(rx_mode, ETH_VPORT_RX_MODE_MCAST_DROP_ALL, 1); -- cgit v1.2.3 From 326439883e17fca029f4ed05307480bdb6369877 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:12 +0300 Subject: qed: Prevent VF from Tx-switching 'promisc' Internal loopback in driver is based on two things - first is the willingness of transmitter to use it [in case of VFs, this can be forced based on VEPA/VEB] and secondly on another vport classification configuration which should match the packet's destination. Current code allows non-linux VFs to configure a 'promisc' mode on Tx, meaning all traffic sent by VF would be loopbacked internally by firmware; This isn't considered a valid mode and as such should be prevented by PF. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 7c199a94cbfc..7e7ae83453d5 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -248,10 +248,6 @@ qed_sp_update_accept_mode(struct qed_hwfn *p_hwfn, SET_FIELD(state, ETH_VPORT_TX_MODE_UCAST_DROP_ALL, !!(accept_filter & QED_ACCEPT_NONE)); - SET_FIELD(state, ETH_VPORT_TX_MODE_UCAST_ACCEPT_ALL, - (!!(accept_filter & QED_ACCEPT_UCAST_MATCHED) && - !!(accept_filter & QED_ACCEPT_UCAST_UNMATCHED))); - SET_FIELD(state, ETH_VPORT_TX_MODE_MCAST_DROP_ALL, !!(accept_filter & QED_ACCEPT_NONE)); -- cgit v1.2.3 From a0d26d5a4fc8e13993279f788deeb08069e73b69 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:13 +0300 Subject: qed*: Don't reset statistics on inner reload Several user APIs can cause driver to perform an inner-reload. Currently, doing this would cause the HW/FW statistics of the adapter to reset, which isn't the expected behavior [statistics should only reset on explicit unloads]. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 3 ++- drivers/net/ethernet/qlogic/qede/qede_main.c | 7 ++++--- include/linux/qed/qed_eth_if.h | 1 + 3 files changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 7e7ae83453d5..aada4c7e095f 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -1745,7 +1745,8 @@ static int qed_start_vport(struct qed_dev *cdev, start.vport_id, start.mtu); } - qed_reset_vport_stats(cdev); + if (params->clear_stats) + qed_reset_vport_stats(cdev); return 0; } diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 5733d1888223..f8e11f953acb 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -3231,7 +3231,7 @@ static int qede_stop_queues(struct qede_dev *edev) return rc; } -static int qede_start_queues(struct qede_dev *edev) +static int qede_start_queues(struct qede_dev *edev, bool clear_stats) { int rc, tc, i; int vlan_removal_en = 1; @@ -3462,6 +3462,7 @@ out: enum qede_load_mode { QEDE_LOAD_NORMAL, + QEDE_LOAD_RELOAD, }; static int qede_load(struct qede_dev *edev, enum qede_load_mode mode) @@ -3500,7 +3501,7 @@ static int qede_load(struct qede_dev *edev, enum qede_load_mode mode) goto err3; DP_INFO(edev, "Setup IRQs succeeded\n"); - rc = qede_start_queues(edev); + rc = qede_start_queues(edev, mode != QEDE_LOAD_RELOAD); if (rc) goto err4; DP_INFO(edev, "Start VPORT, RXQ and TXQ succeeded\n"); @@ -3555,7 +3556,7 @@ void qede_reload(struct qede_dev *edev, if (func) func(edev, args); - qede_load(edev, QEDE_LOAD_NORMAL); + qede_load(edev, QEDE_LOAD_RELOAD); mutex_lock(&edev->qede_lock); qede_config_rx_mode(edev->ndev); diff --git a/include/linux/qed/qed_eth_if.h b/include/linux/qed/qed_eth_if.h index 6ae8cb4a61d3..6c876a63558d 100644 --- a/include/linux/qed/qed_eth_if.h +++ b/include/linux/qed/qed_eth_if.h @@ -49,6 +49,7 @@ struct qed_start_vport_params { bool drop_ttl0; u8 vport_id; u16 mtu; + bool clear_stats; }; struct qed_stop_rxq_params { -- cgit v1.2.3 From db511c37d4eb2b4e7312791eb8f9b34ed867445e Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:14 +0300 Subject: qed: Fix returning unlimited SPQ entries Driver has 2 sets of entries for handling ramrod configurations toward firmware - a regular pre-allocated set of entires and a possible 'unlimited' list of additional pending entries. In most scenarios the 'unlimited' list would not be used, but when it does the handling of the ramrod completion doesn't properly handle the release of the entry. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_spq.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c index acac6626a1b2..67d9893774d8 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_spq.c +++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c @@ -614,7 +614,9 @@ qed_spq_add_entry(struct qed_hwfn *p_hwfn, *p_en2 = *p_ent; - kfree(p_ent); + /* EBLOCK responsible to free the allocated p_ent */ + if (p_ent->comp_mode != QED_SPQ_MODE_EBLOCK) + kfree(p_ent); p_ent = p_en2; } @@ -749,6 +751,15 @@ int qed_spq_post(struct qed_hwfn *p_hwfn, * Thus, after gaining the answer perform the cleanup here. */ rc = qed_spq_block(p_hwfn, p_ent, fw_return_code); + + if (p_ent->queue == &p_spq->unlimited_pending) { + /* This is an allocated p_ent which does not need to + * return to pool. + */ + kfree(p_ent); + return rc; + } + if (rc) goto spq_post_fail2; @@ -844,8 +855,12 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn, found->comp_cb.function(p_hwfn, found->comp_cb.cookie, p_data, fw_return_code); - if (found->comp_mode != QED_SPQ_MODE_EBLOCK) - /* EBLOCK is responsible for freeing its own entry */ + if ((found->comp_mode != QED_SPQ_MODE_EBLOCK) || + (found->queue == &p_spq->unlimited_pending)) + /* EBLOCK is responsible for returning its own entry into the + * free list, unless it originally added the entry into the + * unlimited pending list. + */ qed_spq_return_entry(p_hwfn, found); /* Attempt to post pending requests */ -- cgit v1.2.3 From b639f197210d37905a6018ae4297659eb3f48f8f Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:15 +0300 Subject: qed: Add missing port-mode The 'MODULE_FIBER' value replaced several other FIBER values in newer management firmware images, so existing code would fail to properly reflect its mode. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_hsi.h | 1 + drivers/net/ethernet/qlogic/qed/qed_main.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_hsi.h b/drivers/net/ethernet/qlogic/qed/qed_hsi.h index 9afc15fdbb02..e29ed5a69566 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_hsi.h +++ b/drivers/net/ethernet/qlogic/qed/qed_hsi.h @@ -3700,6 +3700,7 @@ struct public_port { #define MEDIA_DA_TWINAX 0x3 #define MEDIA_BASE_T 0x4 #define MEDIA_SFP_1G_FIBER 0x5 +#define MEDIA_MODULE_FIBER 0x6 #define MEDIA_KR 0xf0 #define MEDIA_NOT_PRESENT 0xff diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 61cc6869fa65..c7e01b303540 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -1085,6 +1085,7 @@ static int qed_get_port_type(u32 media_type) case MEDIA_SFPP_10G_FIBER: case MEDIA_SFP_1G_FIBER: case MEDIA_XFP_FIBER: + case MEDIA_MODULE_FIBER: case MEDIA_KR: port_type = PORT_FIBRE; break; -- cgit v1.2.3 From 427460c83cdf55069eee49799a0caef7dde8df69 Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Thu, 16 Jun 2016 11:10:19 -0500 Subject: can: c_can: Update D_CAN TX and RX functions to 32 bit - fix Altera Cyclone access When testing CAN write floods on Altera's CycloneV, the first 2 bytes are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also observed bytes 4 & 5 were corrupted in some cases. The D_CAN Data registers are 32 bits and changing from 16 bit writes to 32 bit writes fixes the problem. Testing performed on Altera CycloneV (D_CAN). Requesting tests on other C_CAN & D_CAN platforms. Reported-by: Richard Andrysek Signed-off-by: Thor Thayer Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 38 +++++++++++++++++++++++++++++++------- 1 file changed, 31 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index f91b094288da..e3dccd3200d5 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -332,9 +332,23 @@ static void c_can_setup_tx_object(struct net_device *dev, int iface, priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl); - for (i = 0; i < frame->can_dlc; i += 2) { - priv->write_reg(priv, C_CAN_IFACE(DATA1_REG, iface) + i / 2, - frame->data[i] | (frame->data[i + 1] << 8)); + if (priv->type == BOSCH_D_CAN) { + u32 data = 0, dreg = C_CAN_IFACE(DATA1_REG, iface); + + for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) { + data = (u32)frame->data[i]; + data |= (u32)frame->data[i + 1] << 8; + data |= (u32)frame->data[i + 2] << 16; + data |= (u32)frame->data[i + 3] << 24; + priv->write_reg32(priv, dreg, data); + } + } else { + for (i = 0; i < frame->can_dlc; i += 2) { + priv->write_reg(priv, + C_CAN_IFACE(DATA1_REG, iface) + i / 2, + frame->data[i] | + (frame->data[i + 1] << 8)); + } } } @@ -402,10 +416,20 @@ static int c_can_read_msg_object(struct net_device *dev, int iface, u32 ctrl) } else { int i, dreg = C_CAN_IFACE(DATA1_REG, iface); - for (i = 0; i < frame->can_dlc; i += 2, dreg ++) { - data = priv->read_reg(priv, dreg); - frame->data[i] = data; - frame->data[i + 1] = data >> 8; + if (priv->type == BOSCH_D_CAN) { + for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) { + data = priv->read_reg32(priv, dreg); + frame->data[i] = data; + frame->data[i + 1] = data >> 8; + frame->data[i + 2] = data >> 16; + frame->data[i + 3] = data >> 24; + } + } else { + for (i = 0; i < frame->can_dlc; i += 2, dreg++) { + data = priv->read_reg(priv, dreg); + frame->data[i] = data; + frame->data[i + 1] = data >> 8; + } } } -- cgit v1.2.3 From 43200a4480cbbe660309621817f54cbb93907108 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Mon, 13 Jun 2016 15:44:19 +0200 Subject: can: at91_can: RX queue could get stuck at high bus load At high bus load it could happen that "at91_poll()" enters with all RX message boxes filled up. If then at the end the "quota" is exceeded as well, "rx_next" will not be reset to the first RX mailbox and hence the interrupts remain disabled. Signed-off-by: Wolfgang Grandegger Tested-by: Amr Bekhit Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/at91_can.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 8b3275d7792a..8f5e93cb7975 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -712,9 +712,10 @@ static int at91_poll_rx(struct net_device *dev, int quota) /* upper group completed, look again in lower */ if (priv->rx_next > get_mb_rx_low_last(priv) && - quota > 0 && mb > get_mb_rx_last(priv)) { + mb > get_mb_rx_last(priv)) { priv->rx_next = get_mb_rx_first(priv); - goto again; + if (quota > 0) + goto again; } return received; -- cgit v1.2.3 From f155d9c0a138463c3c9380d35e54e433c1477336 Mon Sep 17 00:00:00 2001 From: Maximilian Schneider Date: Wed, 8 Jun 2016 18:00:26 +0000 Subject: can: gs_usb: Add Basic support for the bytewerk.org candleLight interface This patchs adds basic support for the bytewerk.org candleLight interface, a open hardware (CERN OHL) USB CAN adapter. Signed-off-by: Hubert Denkmair Signed-off-by: Maximilian Schneider Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/Kconfig | 3 ++- drivers/net/can/usb/gs_usb.c | 14 +++++++++++--- 2 files changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index bcb272f6c68a..2ff0df32b3d1 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -16,7 +16,8 @@ config CAN_ESD_USB2 config CAN_GS_USB tristate "Geschwister Schneider UG interfaces" ---help--- - This driver supports the Geschwister Schneider USB/CAN devices. + This driver supports the Geschwister Schneider and bytewerk.org + candleLight USB CAN interfaces USB/CAN devices If unsure choose N, choose Y for built in support, M to compile as module (module will be named: gs_usb). diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index 1556d4286235..acb0c8490673 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -1,7 +1,9 @@ -/* CAN driver for Geschwister Schneider USB/CAN devices. +/* CAN driver for Geschwister Schneider USB/CAN devices + * and bytewerk.org candleLight USB CAN interfaces. * - * Copyright (C) 2013 Geschwister Schneider Technologie-, + * Copyright (C) 2013-2016 Geschwister Schneider Technologie-, * Entwicklungs- und Vertriebs UG (Haftungsbeschränkt). + * Copyright (C) 2016 Hubert Denkmair * * Many thanks to all socketcan devs! * @@ -29,6 +31,9 @@ #define USB_GSUSB_1_VENDOR_ID 0x1d50 #define USB_GSUSB_1_PRODUCT_ID 0x606f +#define USB_CANDLELIGHT_VENDOR_ID 0x1209 +#define USB_CANDLELIGHT_PRODUCT_ID 0x2323 + #define GSUSB_ENDPOINT_IN 1 #define GSUSB_ENDPOINT_OUT 2 @@ -952,6 +957,8 @@ static void gs_usb_disconnect(struct usb_interface *intf) static const struct usb_device_id gs_usb_table[] = { { USB_DEVICE_INTERFACE_NUMBER(USB_GSUSB_1_VENDOR_ID, USB_GSUSB_1_PRODUCT_ID, 0) }, + { USB_DEVICE_INTERFACE_NUMBER(USB_CANDLELIGHT_VENDOR_ID, + USB_CANDLELIGHT_PRODUCT_ID, 0) }, {} /* Terminating entry */ }; @@ -969,5 +976,6 @@ module_usb_driver(gs_usb_driver); MODULE_AUTHOR("Maximilian Schneider "); MODULE_DESCRIPTION( "Socket CAN device driver for Geschwister Schneider Technologie-, " -"Entwicklungs- und Vertriebs UG. USB2.0 to CAN interfaces."); +"Entwicklungs- und Vertriebs UG. USB2.0 to CAN interfaces\n" +"and bytewerk.org candleLight USB CAN interfaces."); MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From ef0dab4aae14e25efddf1577736f8450132800c5 Mon Sep 17 00:00:00 2001 From: David Miller Date: Sat, 18 Jun 2016 23:52:25 -0700 Subject: PCI: Fix unaligned accesses in VC code The save/restore buffers for VC state is first composed of a 2-byte control register, then a bunch of 4-byte words. This causes unaligned accesses which trap on platform such as sparc. This is easy to fix by simply moving the buffer pointer forward by 4 bytes instead of 2 after dealing with the control register. The length adjustment needs to be changed likewise as well. Fixes: 5f8fc43217a0 ("PCI: Include pci/pcie/Kconfig directly from pci/Kconfig") Reported-by: Meelis Roos Reported-by: Anatoly Pugachev Signed-off-by: David S. Miller Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # v4.6+ --- drivers/pci/vc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/vc.c b/drivers/pci/vc.c index dfbab61a1b47..1fa3a3219c45 100644 --- a/drivers/pci/vc.c +++ b/drivers/pci/vc.c @@ -221,9 +221,9 @@ static int pci_vc_do_save_buffer(struct pci_dev *dev, int pos, else pci_write_config_word(dev, pos + PCI_VC_PORT_CTRL, *(u16 *)buf); - buf += 2; + buf += 4; } - len += 2; + len += 4; /* * If we have any Low Priority VCs and a VC Arbitration Table Offset -- cgit v1.2.3 From 48a70e1ca85e3b484791e100bb403c05ef9d37c8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 18 Jun 2016 11:38:44 +0300 Subject: drm/amdgpu: precedence bug in amdgpu_device_init() ! has higher precedence than bitwise & so we need to add parenthesis for this to work as intended. Fixes: 048765ad5af7 ('amdgpu: fix asic initialization for virtualized environments (v2)') Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 66482b429458..6e920086af46 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1535,7 +1535,7 @@ int amdgpu_device_init(struct amdgpu_device *adev, /* Post card if necessary */ if (!amdgpu_card_posted(adev) || (adev->virtualization.is_virtual && - !adev->virtualization.caps & AMDGPU_VIRT_CAPS_SRIOV_EN)) { + !(adev->virtualization.caps & AMDGPU_VIRT_CAPS_SRIOV_EN))) { if (!adev->bios) { dev_err(adev->dev, "Card not posted and no BIOS - ignoring\n"); return -EINVAL; -- cgit v1.2.3 From 29b9c528b8c295911e8b1e515273e89a2b7fa2d8 Mon Sep 17 00:00:00 2001 From: Nicolas Iooss Date: Sat, 18 Jun 2016 22:55:00 +0200 Subject: drm/amdgpu: initialize amdgpu_cgs_acpi_eval_object result value amdgpu_cgs_acpi_eval_object() returned the value of variable "result" without initializing it first. This bug has been found by compiling the kernel with clang. The compiler complained: drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: error: variable 'result' is used uninitialized whenever 'for' loop exits because its condition is false [-Werror,-Wsometimes-uninitialized] for (i = 0; i < count; i++) { ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:1011:9: note: uninitialized use occurs here return result; ^~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: note: remove the condition if it is always true for (i = 0; i < count; i++) { ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:864:12: note: initialize the variable 'result' to silence this warning int result; ^ = 0 Fixes: 3f1d35a03b3c ("drm/amdgpu: implement new cgs interface for acpi function") Signed-off-by: Nicolas Iooss Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index 8943099eb135..cf6f49fc1c75 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -909,7 +909,7 @@ static int amdgpu_cgs_acpi_eval_object(struct cgs_device *cgs_device, struct cgs_acpi_method_argument *argument = NULL; uint32_t i, count; acpi_status status; - int result; + int result = 0; uint32_t func_no = 0xFFFFFFFF; handle = ACPI_HANDLE(&adev->pdev->dev); -- cgit v1.2.3 From a5e9b85a6540df6c4074d3a56674f6fb6c5fc830 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 17 Jun 2016 17:24:23 +0000 Subject: clk: Fix return value check in oxnas_stdclk_probe() In case of error, the function syscon_node_to_regmap() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Acked-by: Neil Armstrong Fixes: 0bbd72b4c64f ("clk: Add Oxford Semiconductor OXNAS Standard Clocks") Signed-off-by: Stephen Boyd --- drivers/clk/clk-oxnas.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/clk-oxnas.c b/drivers/clk/clk-oxnas.c index efba7d4dbcfc..79bcb2e42060 100644 --- a/drivers/clk/clk-oxnas.c +++ b/drivers/clk/clk-oxnas.c @@ -144,9 +144,9 @@ static int oxnas_stdclk_probe(struct platform_device *pdev) return -ENOMEM; regmap = syscon_node_to_regmap(of_get_parent(np)); - if (!regmap) { + if (IS_ERR(regmap)) { dev_err(&pdev->dev, "failed to have parent regmap\n"); - return -EINVAL; + return PTR_ERR(regmap); } for (i = 0; i < ARRAY_SIZE(clk_oxnas_init); i++) { -- cgit v1.2.3 From 1b7e38b92b0bbd363369f5160f13f4d26140972d Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Fri, 27 May 2016 16:09:25 +0200 Subject: drm: atmel-hlcdc: actually disable scaling when no scaling is required The driver is only enabling scaling, but never disabling it, thus, if you enable the scaling feature once it stays enabled forever. Signed-off-by: Boris Brezillon Reported-by: Alex Vazquez Reviewed-by: Nicolas Ferre Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support") Cc: --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c index aef3ca8a81fa..016c191221f3 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c @@ -339,6 +339,8 @@ atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane, atmel_hlcdc_layer_update_cfg(&plane->layer, 13, 0xffffffff, factor_reg); + } else { + atmel_hlcdc_layer_update_cfg(&plane->layer, 13, 0xffffffff, 0); } } -- cgit v1.2.3 From 0b1e1eb76220afa043b2733dfe61f5927cf0e458 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Fri, 3 Jun 2016 09:17:36 +0200 Subject: drm: atmel-hlcdc: Fix OF graph parsing atmel_hlcdc_create_outputs() iterates over OF graph nodes and releases the node (using of_node_put()) after each iteration, which is wrong since for_each_endpoint_of_node() is already taking care of that. Move the of_node_put() call in the error path. Signed-off-by: Boris Brezillon Reviewed-by: Nicolas Ferre Fixes: 17a8e03e7e97 ("drm: atmel-hlcdc: rework the output code to support drm bridges") --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c index 39802c0539b6..3d34fc4ca826 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c @@ -266,9 +266,10 @@ int atmel_hlcdc_create_outputs(struct drm_device *dev) if (!ret) ret = atmel_hlcdc_check_endpoint(dev, &ep); - of_node_put(ep_np); - if (ret) + if (ret) { + of_node_put(ep_np); return ret; + } } for_each_endpoint_of_node(dev->dev->of_node, ep_np) { @@ -276,9 +277,10 @@ int atmel_hlcdc_create_outputs(struct drm_device *dev) if (!ret) ret = atmel_hlcdc_attach_endpoint(dev, &ep); - of_node_put(ep_np); - if (ret) + if (ret) { + of_node_put(ep_np); return ret; + } } return 0; -- cgit v1.2.3 From 1d7b84d12af8312b52316029f1fa0fa4eac3c9e4 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Fri, 17 Jun 2016 18:21:01 +0800 Subject: drm/amd/powerplay: fix logic error. the error lead powerplay can't get display info in DGPU case. store_cc6_data just implement in APU. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c index fa208ada6892..efb77eda7508 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c @@ -306,10 +306,14 @@ int phm_store_dal_configuration_data(struct pp_hwmgr *hwmgr, { PHM_FUNC_CHECK(hwmgr); - if (hwmgr->hwmgr_func->store_cc6_data == NULL) + if (display_config == NULL) return -EINVAL; hwmgr->display_config = *display_config; + + if (hwmgr->hwmgr_func->store_cc6_data == NULL) + return -EINVAL; + /* to do pass other display configuration in furture */ if (hwmgr->hwmgr_func->store_cc6_data) -- cgit v1.2.3 From 576b4401b1971fe40be4cfd379430a61cd8426b2 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 13 Jun 2016 17:39:19 +0800 Subject: drm/amd/powerplay: fix bug that function parameter was incorect. Wrong value passed to acpi_pcie_perf_request. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Reviewed-by: Ken Wang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c b/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c index 58742e0d1492..d19a9b624242 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c @@ -77,7 +77,7 @@ int acpi_pcie_perf_request(void *device, uint8_t perf_req, bool advertise) ATCS_FUNCTION_PCIE_PERFORMANCE_REQUEST, &atcs_input, &atcs_output, - 0, + 1, sizeof(atcs_input), sizeof(atcs_output)); if (result != 0) -- cgit v1.2.3 From 0a4fef559b69ae2e682c98f31d53a225fbda78bd Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 14 Jun 2016 18:36:36 +0800 Subject: drm/amd/powerplay: need to notify system bios pcie device ready before request performance state. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Reviewed-by: Ken Wang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c | 16 +++++++++++++++- drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h | 1 + 2 files changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c b/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c index d19a9b624242..a3c38bbd1e94 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/pp_acpi.c @@ -44,6 +44,20 @@ bool acpi_atcs_functions_supported(void *device, uint32_t index) return result == 0 ? (output_buf.function_bits & (1 << (index - 1))) != 0 : false; } +bool acpi_atcs_notify_pcie_device_ready(void *device) +{ + int32_t temp_buffer = 1; + + return cgs_call_acpi_method(device, CGS_ACPI_METHOD_ATCS, + ATCS_FUNCTION_PCIE_DEVICE_READY_NOTIFICATION, + &temp_buffer, + NULL, + 0, + sizeof(temp_buffer), + 0); +} + + int acpi_pcie_perf_request(void *device, uint8_t perf_req, bool advertise) { struct atcs_pref_req_input atcs_input; @@ -52,7 +66,7 @@ int acpi_pcie_perf_request(void *device, uint8_t perf_req, bool advertise) int result; struct cgs_system_info info = {0}; - if (!acpi_atcs_functions_supported(device, ATCS_FUNCTION_PCIE_PERFORMANCE_REQUEST)) + if( 0 != acpi_atcs_notify_pcie_device_ready(device)) return -EINVAL; info.size = sizeof(struct cgs_system_info); diff --git a/drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h b/drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h index 3bd5e69b9045..3df5de2cdab0 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h +++ b/drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h @@ -26,3 +26,4 @@ extern bool acpi_atcs_functions_supported(void *device, extern int acpi_pcie_perf_request(void *device, uint8_t perf_req, bool advertise); +extern bool acpi_atcs_notify_pcie_device_ready(void *device); -- cgit v1.2.3 From 919e334dec283294acd99951d016e59ad725c9a7 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 11 May 2016 17:04:07 +0800 Subject: drm/amd/powerplay: enable PowerContainment feature for polaris10/11. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 1400bc420881..07159958e77d 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -2606,6 +2606,7 @@ int polaris10_set_features_platform_caps(struct pp_hwmgr *hwmgr) phm_cap_set(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_FanSpeedInTableIsRPM); + if (hwmgr->chip_id == CHIP_POLARIS11) phm_cap_set(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_SPLLShutdownSupport); @@ -2938,6 +2939,9 @@ int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) data->vddci_control = POLARIS10_VOLTAGE_CONTROL_NONE; data->mvdd_control = POLARIS10_VOLTAGE_CONTROL_NONE; + data->enable_tdc_limit_feature = true; + data->enable_pkg_pwr_tracking_feature = true; + if (atomctrl_is_voltage_controled_by_gpio_v3(hwmgr, VOLTAGE_TYPE_VDDC, VOLTAGE_OBJ_SVID2)) data->voltage_control = POLARIS10_VOLTAGE_CONTROL_BY_SVID2; -- cgit v1.2.3 From a2fb4934e960b11e4430dccc08d606c99910b447 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 13 Jun 2016 17:46:31 +0800 Subject: drm/amd/powerplay: initialize variables which were missed. Missing pcie dpm settings. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Reviewed-by: Ken Wang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c | 2 ++ drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 1 + drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c | 1 + 3 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c index 586f73276226..92912ab20944 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c @@ -633,6 +633,8 @@ static int fiji_hwmgr_backend_init(struct pp_hwmgr *hwmgr) data->vddci_control = FIJI_VOLTAGE_CONTROL_NONE; data->mvdd_control = FIJI_VOLTAGE_CONTROL_NONE; + data->force_pcie_gen = PP_PCIEGenInvalid; + if (atomctrl_is_voltage_controled_by_gpio_v3(hwmgr, VOLTAGE_TYPE_VDDC, VOLTAGE_OBJ_SVID2)) data->voltage_control = FIJI_VOLTAGE_CONTROL_BY_SVID2; diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 07159958e77d..643677fb5212 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -2941,6 +2941,7 @@ int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) data->enable_tdc_limit_feature = true; data->enable_pkg_pwr_tracking_feature = true; + data->force_pcie_gen = PP_PCIEGenInvalid; if (atomctrl_is_voltage_controled_by_gpio_v3(hwmgr, VOLTAGE_TYPE_VDDC, VOLTAGE_OBJ_SVID2)) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c index d27e8c40602a..233eb7f36c1d 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c @@ -4489,6 +4489,7 @@ int tonga_hwmgr_backend_init(struct pp_hwmgr *hwmgr) data->vdd_ci_control = TONGA_VOLTAGE_CONTROL_NONE; data->vdd_gfx_control = TONGA_VOLTAGE_CONTROL_NONE; data->mvdd_control = TONGA_VOLTAGE_CONTROL_NONE; + data->force_pcie_gen = PP_PCIEGenInvalid; if (atomctrl_is_voltage_controled_by_gpio_v3(hwmgr, VOLTAGE_TYPE_VDDC, VOLTAGE_OBJ_SVID2)) { -- cgit v1.2.3 From 40787ef21c2889fc3d96a11775fa412e715d7d48 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 8 Jun 2016 19:41:00 +0800 Subject: drm/amd/powerplay: disable UVD SMU handshake for MCLK. sync up with internal programming recommendations. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 643677fb5212..5ecde13e4893 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -2252,6 +2252,9 @@ static int polaris10_enable_deep_sleep_master_switch(struct pp_hwmgr *hwmgr) static int polaris10_enable_sclk_mclk_dpm(struct pp_hwmgr *hwmgr) { struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + uint32_t soft_register_value = 0; + uint32_t handshake_disables_offset = data->soft_regs_start + + offsetof(SMU74_SoftRegisters, HandshakeDisables); /* enable SCLK dpm */ if (!data->sclk_dpm_key_disabled) @@ -2262,6 +2265,12 @@ static int polaris10_enable_sclk_mclk_dpm(struct pp_hwmgr *hwmgr) /* enable MCLK dpm */ if (0 == data->mclk_dpm_key_disabled) { +/* Disable UVD - SMU handshake for MCLK. */ + soft_register_value = cgs_read_ind_register(hwmgr->device, + CGS_IND_REG__SMC, handshake_disables_offset); + soft_register_value |= SMU7_UVD_MCLK_HANDSHAKE_DISABLE; + cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, + handshake_disables_offset, soft_register_value); PP_ASSERT_WITH_CODE( (0 == smum_send_msg_to_smc(hwmgr->smumgr, -- cgit v1.2.3 From 9a3c1b342be28a14006f644528dd9baad43db443 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 8 Jun 2016 19:42:48 +0800 Subject: drm/amd/powrplay: enable stutter_mode for polaris. To minimize the dram power expenditure during static -screen Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 5ecde13e4893..c2f5bec272c4 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -1296,7 +1296,6 @@ static int polaris10_populate_single_memory_level(struct pp_hwmgr *hwmgr, } mem_level->MclkFrequency = clock; - mem_level->StutterEnable = 0; mem_level->EnabledForThrottle = 1; mem_level->EnabledForActivity = 0; mem_level->UpHyst = 0; @@ -1363,7 +1362,7 @@ static int polaris10_populate_all_memory_levels(struct pp_hwmgr *hwmgr) * a higher state by default such that we are not effected by * up threshold or and MCLK DPM latency. */ - levels[0].ActivityLevel = (uint16_t)data->mclk_dpm0_activity_target; + levels[0].ActivityLevel = 0x1f; CONVERT_FROM_HOST_TO_SMC_US(levels[0].ActivityLevel); data->smc_state_table.MemoryDpmLevelCount = @@ -2951,6 +2950,7 @@ int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) data->enable_tdc_limit_feature = true; data->enable_pkg_pwr_tracking_feature = true; data->force_pcie_gen = PP_PCIEGenInvalid; + data->mclk_stutter_mode_threshold = 40000; if (atomctrl_is_voltage_controled_by_gpio_v3(hwmgr, VOLTAGE_TYPE_VDDC, VOLTAGE_OBJ_SVID2)) -- cgit v1.2.3 From 31b21243776e1f41813f40ce16c465bf03acd9ba Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 7 Jun 2016 18:38:39 +0800 Subject: drm/amd/powerplay: add avfs related define for polaris Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/inc/smu74.h | 75 +++++++++++++++++++--- drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h | 42 ++++++++---- 2 files changed, 98 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu74.h b/drivers/gpu/drm/amd/powerplay/inc/smu74.h index 1a12d85b8e97..fd10a9fa843d 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/smu74.h +++ b/drivers/gpu/drm/amd/powerplay/inc/smu74.h @@ -34,6 +34,30 @@ #define SMU__NUM_LCLK_DPM_LEVELS 8 #define SMU__NUM_PCIE_DPM_LEVELS 8 +#define EXP_M1 35 +#define EXP_M2 92821 +#define EXP_B 66629747 + +#define EXP_M1_1 365 +#define EXP_M2_1 658700 +#define EXP_B_1 305506134 + +#define EXP_M1_2 189 +#define EXP_M2_2 379692 +#define EXP_B_2 194609469 + +#define EXP_M1_3 99 +#define EXP_M2_3 217915 +#define EXP_B_3 122255994 + +#define EXP_M1_4 51 +#define EXP_M2_4 122643 +#define EXP_B_4 74893384 + +#define EXP_M1_5 423 +#define EXP_M2_5 1103326 +#define EXP_B_5 728122621 + enum SID_OPTION { SID_OPTION_HI, SID_OPTION_LO, @@ -548,20 +572,20 @@ struct SMU74_Firmware_Header { uint32_t CacConfigTable; uint32_t CacStatusTable; - uint32_t mcRegisterTable; - uint32_t mcArbDramTimingTable; - - - uint32_t PmFuseTable; uint32_t Globals; uint32_t ClockStretcherTable; uint32_t VftTable; - uint32_t Reserved[21]; + uint32_t Reserved1; + uint32_t AvfsTable; + uint32_t AvfsCksOffGbvTable; + uint32_t AvfsMeanNSigma; + uint32_t AvfsSclkOffsetTable; + uint32_t Reserved[16]; uint32_t Signature; }; @@ -701,8 +725,6 @@ VR Config info is contained in dpmTable.VRConfig */ struct SMU_ClockStretcherDataTableEntry { uint8_t minVID; uint8_t maxVID; - - uint16_t setting; }; typedef struct SMU_ClockStretcherDataTableEntry SMU_ClockStretcherDataTableEntry; @@ -769,6 +791,43 @@ struct VFT_TABLE_t { typedef struct VFT_TABLE_t VFT_TABLE_t; +/* Total margin, root mean square of Fmax + DC + Platform */ +struct AVFS_Margin_t { + VFT_CELL_t Cell[NUM_VFT_COLUMNS]; +}; +typedef struct AVFS_Margin_t AVFS_Margin_t; + +#define BTCGB_VDROOP_TABLE_MAX_ENTRIES 2 +#define AVFSGB_VDROOP_TABLE_MAX_ENTRIES 2 + +struct GB_VDROOP_TABLE_t { + int32_t a0; + int32_t a1; + int32_t a2; + uint32_t spare; +}; +typedef struct GB_VDROOP_TABLE_t GB_VDROOP_TABLE_t; + +struct AVFS_CksOff_Gbv_t { + VFT_CELL_t Cell[NUM_VFT_COLUMNS]; +}; +typedef struct AVFS_CksOff_Gbv_t AVFS_CksOff_Gbv_t; + +struct AVFS_meanNsigma_t { + uint32_t Aconstant[3]; + uint16_t DC_tol_sigma; + uint16_t Platform_mean; + uint16_t Platform_sigma; + uint16_t PSM_Age_CompFactor; + uint8_t Static_Voltage_Offset[NUM_VFT_COLUMNS]; +}; +typedef struct AVFS_meanNsigma_t AVFS_meanNsigma_t; + +struct AVFS_Sclk_Offset_t { + uint16_t Sclk_Offset[8]; +}; +typedef struct AVFS_Sclk_Offset_t AVFS_Sclk_Offset_t; + #endif diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h b/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h index 0dfe82336dc7..b85ff5400e57 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h +++ b/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h @@ -223,6 +223,16 @@ struct SMU74_Discrete_StateInfo { typedef struct SMU74_Discrete_StateInfo SMU74_Discrete_StateInfo; +struct SMU_QuadraticCoeffs { + int32_t m1; + uint32_t b; + + int16_t m2; + uint8_t m1_shift; + uint8_t m2_shift; +}; +typedef struct SMU_QuadraticCoeffs SMU_QuadraticCoeffs; + struct SMU74_Discrete_DpmTable { SMU74_PIDController GraphicsPIDController; @@ -258,7 +268,14 @@ struct SMU74_Discrete_DpmTable { uint8_t ThermOutPolarity; uint8_t ThermOutMode; uint8_t BootPhases; - uint32_t Reserved[4]; + + uint8_t VRHotLevel; + uint8_t Reserved1[3]; + uint16_t FanStartTemperature; + uint16_t FanStopTemperature; + uint16_t MaxVoltage; + uint16_t Reserved2; + uint32_t Reserved[1]; SMU74_Discrete_GraphicsLevel GraphicsLevel[SMU74_MAX_LEVELS_GRAPHICS]; SMU74_Discrete_MemoryLevel MemoryACPILevel; @@ -347,6 +364,8 @@ struct SMU74_Discrete_DpmTable { uint32_t CurrSclkPllRange; sclkFcwRange_t SclkFcwRangeTable[NUM_SCLK_RANGE]; + GB_VDROOP_TABLE_t BTCGB_VDROOP_TABLE[BTCGB_VDROOP_TABLE_MAX_ENTRIES]; + SMU_QuadraticCoeffs AVFSGB_VDROOP_TABLE[AVFSGB_VDROOP_TABLE_MAX_ENTRIES]; }; typedef struct SMU74_Discrete_DpmTable SMU74_Discrete_DpmTable; @@ -550,16 +569,6 @@ struct SMU7_AcpiScoreboard { typedef struct SMU7_AcpiScoreboard SMU7_AcpiScoreboard; -struct SMU_QuadraticCoeffs { - int32_t m1; - uint32_t b; - - int16_t m2; - uint8_t m1_shift; - uint8_t m2_shift; -}; -typedef struct SMU_QuadraticCoeffs SMU_QuadraticCoeffs; - struct SMU74_Discrete_PmFuses { uint8_t BapmVddCVidHiSidd[8]; uint8_t BapmVddCVidLoSidd[8]; @@ -821,6 +830,17 @@ typedef struct SMU7_GfxCuPgScoreboard SMU7_GfxCuPgScoreboard; #define DB_PCC_SHIFT 26 #define DB_EDC_SHIFT 27 +#define BTCGB0_Vdroop_Enable_MASK 0x1 +#define BTCGB1_Vdroop_Enable_MASK 0x2 +#define AVFSGB0_Vdroop_Enable_MASK 0x4 +#define AVFSGB1_Vdroop_Enable_MASK 0x8 + +#define BTCGB0_Vdroop_Enable_SHIFT 0 +#define BTCGB1_Vdroop_Enable_SHIFT 1 +#define AVFSGB0_Vdroop_Enable_SHIFT 2 +#define AVFSGB1_Vdroop_Enable_SHIFT 3 + + #pragma pack(pop) -- cgit v1.2.3 From c11cb70483c33404d1c0cf9aa48e7627eecbe14d Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 8 Jun 2016 19:17:31 +0800 Subject: drm/amdgpu/atombios: add avfs struct for Polaris10/11 Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/include/atombios.h | 72 ++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/include/atombios.h b/drivers/gpu/drm/amd/include/atombios.h index 32f3e345de08..3493da5c8f0e 100644 --- a/drivers/gpu/drm/amd/include/atombios.h +++ b/drivers/gpu/drm/amd/include/atombios.h @@ -5538,6 +5538,78 @@ typedef struct _ATOM_ASIC_PROFILING_INFO_V3_5 ULONG ulReserved[12]; }ATOM_ASIC_PROFILING_INFO_V3_5; +/* for Polars10/11 AVFS parameters */ +typedef struct _ATOM_ASIC_PROFILING_INFO_V3_6 +{ + ATOM_COMMON_TABLE_HEADER asHeader; + ULONG ulMaxVddc; + ULONG ulMinVddc; + USHORT usLkgEuseIndex; + UCHAR ucLkgEfuseBitLSB; + UCHAR ucLkgEfuseLength; + ULONG ulLkgEncodeLn_MaxDivMin; + ULONG ulLkgEncodeMax; + ULONG ulLkgEncodeMin; + EFUSE_LINEAR_FUNC_PARAM sRoFuse; + ULONG ulEvvDefaultVddc; + ULONG ulEvvNoCalcVddc; + ULONG ulSpeed_Model; + ULONG ulSM_A0; + ULONG ulSM_A1; + ULONG ulSM_A2; + ULONG ulSM_A3; + ULONG ulSM_A4; + ULONG ulSM_A5; + ULONG ulSM_A6; + ULONG ulSM_A7; + UCHAR ucSM_A0_sign; + UCHAR ucSM_A1_sign; + UCHAR ucSM_A2_sign; + UCHAR ucSM_A3_sign; + UCHAR ucSM_A4_sign; + UCHAR ucSM_A5_sign; + UCHAR ucSM_A6_sign; + UCHAR ucSM_A7_sign; + ULONG ulMargin_RO_a; + ULONG ulMargin_RO_b; + ULONG ulMargin_RO_c; + ULONG ulMargin_fixed; + ULONG ulMargin_Fmax_mean; + ULONG ulMargin_plat_mean; + ULONG ulMargin_Fmax_sigma; + ULONG ulMargin_plat_sigma; + ULONG ulMargin_DC_sigma; + ULONG ulLoadLineSlop; + ULONG ulaTDClimitPerDPM[8]; + ULONG ulaNoCalcVddcPerDPM[8]; + ULONG ulAVFS_meanNsigma_Acontant0; + ULONG ulAVFS_meanNsigma_Acontant1; + ULONG ulAVFS_meanNsigma_Acontant2; + USHORT usAVFS_meanNsigma_DC_tol_sigma; + USHORT usAVFS_meanNsigma_Platform_mean; + USHORT usAVFS_meanNsigma_Platform_sigma; + ULONG ulGB_VDROOP_TABLE_CKSOFF_a0; + ULONG ulGB_VDROOP_TABLE_CKSOFF_a1; + ULONG ulGB_VDROOP_TABLE_CKSOFF_a2; + ULONG ulGB_VDROOP_TABLE_CKSON_a0; + ULONG ulGB_VDROOP_TABLE_CKSON_a1; + ULONG ulGB_VDROOP_TABLE_CKSON_a2; + ULONG ulAVFSGB_FUSE_TABLE_CKSOFF_m1; + USHORT usAVFSGB_FUSE_TABLE_CKSOFF_m2; + ULONG ulAVFSGB_FUSE_TABLE_CKSOFF_b; + ULONG ulAVFSGB_FUSE_TABLE_CKSON_m1; + USHORT usAVFSGB_FUSE_TABLE_CKSON_m2; + ULONG ulAVFSGB_FUSE_TABLE_CKSON_b; + USHORT usMaxVoltage_0_25mv; + UCHAR ucEnableGB_VDROOP_TABLE_CKSOFF; + UCHAR ucEnableGB_VDROOP_TABLE_CKSON; + UCHAR ucEnableGB_FUSE_TABLE_CKSOFF; + UCHAR ucEnableGB_FUSE_TABLE_CKSON; + USHORT usPSM_Age_ComFactor; + UCHAR ucEnableApplyAVFS_CKS_OFF_Voltage; + UCHAR ucReserved; +}ATOM_ASIC_PROFILING_INFO_V3_6; + typedef struct _ATOM_SCLK_FCW_RANGE_ENTRY_V1{ ULONG ulMaxSclkFreq; -- cgit v1.2.3 From 432c3a3ca794bd2301425cb58bf097fc26690c17 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 8 Jun 2016 19:39:42 +0800 Subject: drm/amd/powerplay: enable avfs feature for polaris avfs feature is for voltage control based on gpu system clock on polaris10 Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 90 +++++++++++++++++++++- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h | 3 + .../drm/amd/powerplay/hwmgr/polaris10_thermal.c | 6 +- drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c | 43 +++++++++++ drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h | 32 ++++++++ .../gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h | 1 + .../drm/amd/powerplay/smumgr/polaris10_smumgr.c | 50 ++++++++---- 7 files changed, 208 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index c2f5bec272c4..f730ec8b529d 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -1303,7 +1303,6 @@ static int polaris10_populate_single_memory_level(struct pp_hwmgr *hwmgr, mem_level->VoltageDownHyst = 0; mem_level->ActivityLevel = (uint16_t)data->mclk_activity_target; mem_level->StutterEnable = false; - mem_level->DisplayWatermark = PPSMC_DISPLAY_WATERMARK_LOW; data->display_timing.num_existing_displays = info.display_count; @@ -1955,6 +1954,90 @@ static int polaris10_populate_vr_config(struct pp_hwmgr *hwmgr, return 0; } + +int polaris10_populate_avfs_parameters(struct pp_hwmgr *hwmgr) +{ + struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + SMU74_Discrete_DpmTable *table = &(data->smc_state_table); + int result = 0; + struct pp_atom_ctrl__avfs_parameters avfs_params = {0}; + AVFS_meanNsigma_t AVFS_meanNsigma = { {0} }; + AVFS_Sclk_Offset_t AVFS_SclkOffset = { {0} }; + uint32_t tmp, i; + struct pp_smumgr *smumgr = hwmgr->smumgr; + struct polaris10_smumgr *smu_data = (struct polaris10_smumgr *)(smumgr->backend); + + struct phm_ppt_v1_information *table_info = + (struct phm_ppt_v1_information *)hwmgr->pptable; + struct phm_ppt_v1_clock_voltage_dependency_table *sclk_table = + table_info->vdd_dep_on_sclk; + + + if (smu_data->avfs.avfs_btc_status == AVFS_BTC_NOTSUPPORTED) + return result; + + result = atomctrl_get_avfs_information(hwmgr, &avfs_params); + + if (0 == result) { + table->BTCGB_VDROOP_TABLE[0].a0 = PP_HOST_TO_SMC_UL(avfs_params.ulGB_VDROOP_TABLE_CKSON_a0); + table->BTCGB_VDROOP_TABLE[0].a1 = PP_HOST_TO_SMC_UL(avfs_params.ulGB_VDROOP_TABLE_CKSON_a1); + table->BTCGB_VDROOP_TABLE[0].a2 = PP_HOST_TO_SMC_UL(avfs_params.ulGB_VDROOP_TABLE_CKSON_a2); + table->BTCGB_VDROOP_TABLE[1].a0 = PP_HOST_TO_SMC_UL(avfs_params.ulGB_VDROOP_TABLE_CKSOFF_a0); + table->BTCGB_VDROOP_TABLE[1].a1 = PP_HOST_TO_SMC_UL(avfs_params.ulGB_VDROOP_TABLE_CKSOFF_a1); + table->BTCGB_VDROOP_TABLE[1].a2 = PP_HOST_TO_SMC_UL(avfs_params.ulGB_VDROOP_TABLE_CKSOFF_a2); + table->AVFSGB_VDROOP_TABLE[0].m1 = PP_HOST_TO_SMC_UL(avfs_params.ulAVFSGB_FUSE_TABLE_CKSON_m1); + table->AVFSGB_VDROOP_TABLE[0].m2 = PP_HOST_TO_SMC_US(avfs_params.usAVFSGB_FUSE_TABLE_CKSON_m2); + table->AVFSGB_VDROOP_TABLE[0].b = PP_HOST_TO_SMC_UL(avfs_params.ulAVFSGB_FUSE_TABLE_CKSON_b); + table->AVFSGB_VDROOP_TABLE[0].m1_shift = 24; + table->AVFSGB_VDROOP_TABLE[0].m2_shift = 12; + table->AVFSGB_VDROOP_TABLE[1].m1 = PP_HOST_TO_SMC_UL(avfs_params.ulAVFSGB_FUSE_TABLE_CKSOFF_m1); + table->AVFSGB_VDROOP_TABLE[1].m2 = PP_HOST_TO_SMC_US(avfs_params.usAVFSGB_FUSE_TABLE_CKSOFF_m2); + table->AVFSGB_VDROOP_TABLE[1].b = PP_HOST_TO_SMC_UL(avfs_params.ulAVFSGB_FUSE_TABLE_CKSOFF_b); + table->AVFSGB_VDROOP_TABLE[1].m1_shift = 24; + table->AVFSGB_VDROOP_TABLE[1].m2_shift = 12; + table->MaxVoltage = PP_HOST_TO_SMC_US(avfs_params.usMaxVoltage_0_25mv); + AVFS_meanNsigma.Aconstant[0] = PP_HOST_TO_SMC_UL(avfs_params.ulAVFS_meanNsigma_Acontant0); + AVFS_meanNsigma.Aconstant[1] = PP_HOST_TO_SMC_UL(avfs_params.ulAVFS_meanNsigma_Acontant1); + AVFS_meanNsigma.Aconstant[2] = PP_HOST_TO_SMC_UL(avfs_params.ulAVFS_meanNsigma_Acontant2); + AVFS_meanNsigma.DC_tol_sigma = PP_HOST_TO_SMC_US(avfs_params.usAVFS_meanNsigma_DC_tol_sigma); + AVFS_meanNsigma.Platform_mean = PP_HOST_TO_SMC_US(avfs_params.usAVFS_meanNsigma_Platform_mean); + AVFS_meanNsigma.PSM_Age_CompFactor = PP_HOST_TO_SMC_US(avfs_params.usPSM_Age_ComFactor); + AVFS_meanNsigma.Platform_sigma = PP_HOST_TO_SMC_US(avfs_params.usAVFS_meanNsigma_Platform_sigma); + + for (i = 0; i < NUM_VFT_COLUMNS; i++) { + AVFS_meanNsigma.Static_Voltage_Offset[i] = (uint8_t)(sclk_table->entries[i].cks_voffset * 100 / 625); + AVFS_SclkOffset.Sclk_Offset[i] = PP_HOST_TO_SMC_US((uint16_t)(sclk_table->entries[i].sclk_offset) / 100); + } + + result = polaris10_read_smc_sram_dword(smumgr, + SMU7_FIRMWARE_HEADER_LOCATION + offsetof(SMU74_Firmware_Header, AvfsMeanNSigma), + &tmp, data->sram_end); + + polaris10_copy_bytes_to_smc(smumgr, + tmp, + (uint8_t *)&AVFS_meanNsigma, + sizeof(AVFS_meanNsigma_t), + data->sram_end); + + result = polaris10_read_smc_sram_dword(smumgr, + SMU7_FIRMWARE_HEADER_LOCATION + offsetof(SMU74_Firmware_Header, AvfsSclkOffsetTable), + &tmp, data->sram_end); + polaris10_copy_bytes_to_smc(smumgr, + tmp, + (uint8_t *)&AVFS_SclkOffset, + sizeof(AVFS_Sclk_Offset_t), + data->sram_end); + + data->avfs_vdroop_override_setting = (avfs_params.ucEnableGB_VDROOP_TABLE_CKSON << BTCGB0_Vdroop_Enable_SHIFT) | + (avfs_params.ucEnableGB_VDROOP_TABLE_CKSOFF << BTCGB1_Vdroop_Enable_SHIFT) | + (avfs_params.ucEnableGB_FUSE_TABLE_CKSON << AVFSGB0_Vdroop_Enable_SHIFT) | + (avfs_params.ucEnableGB_FUSE_TABLE_CKSOFF << AVFSGB1_Vdroop_Enable_SHIFT); + data->apply_avfs_cks_off_voltage = (avfs_params.ucEnableApplyAVFS_CKS_OFF_Voltage == 1) ? true : false; + } + return result; +} + + /** * Initializes the SMC table and uploads it * @@ -2055,6 +2138,10 @@ static int polaris10_init_smc_table(struct pp_hwmgr *hwmgr) "Failed to populate Clock Stretcher Data Table!", return result); } + + result = polaris10_populate_avfs_parameters(hwmgr); + PP_ASSERT_WITH_CODE(0 == result, "Failed to populate AVFS Parameters!", return result;); + table->CurrSclkPllRange = 0xff; table->GraphicsVoltageChangeEnable = 1; table->GraphicsThermThrottleEnable = 1; @@ -2277,7 +2364,6 @@ static int polaris10_enable_sclk_mclk_dpm(struct pp_hwmgr *hwmgr) "Failed to enable MCLK DPM during DPM Start Function!", return -1); - PHM_WRITE_FIELD(hwmgr->device, MC_SEQ_CNTL_3, CAC_EN, 0x1); cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixLCAC_MC0_CNTL, 0x5); diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h index beedf35cbfa6..d717789441f5 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h @@ -312,6 +312,9 @@ struct polaris10_hwmgr { /* soft pptable for re-uploading into smu */ void *soft_pp_table; + + uint32_t avfs_vdroop_override_setting; + bool apply_avfs_cks_off_voltage; }; /* To convert to Q8.8 format for firmware */ diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_thermal.c index aba167f7d167..b206632d4650 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_thermal.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_thermal.c @@ -625,10 +625,14 @@ static int tf_polaris10_thermal_avfs_enable(struct pp_hwmgr *hwmgr, int ret; struct pp_smumgr *smumgr = (struct pp_smumgr *)(hwmgr->smumgr); struct polaris10_smumgr *smu_data = (struct polaris10_smumgr *)(smumgr->backend); + struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); - if (smu_data->avfs.avfs_btc_status != AVFS_BTC_ENABLEAVFS) + if (smu_data->avfs.avfs_btc_status == AVFS_BTC_NOTSUPPORTED) return 0; + ret = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, + PPSMC_MSG_SetGBDroopSettings, data->avfs_vdroop_override_setting); + ret = (smum_send_msg_to_smc(smumgr, PPSMC_MSG_EnableAvfs) == 0) ? 0 : -1; diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c index da9f5f1b6dc2..bf4e18fd3872 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c @@ -1302,3 +1302,46 @@ int atomctrl_get_smc_sclk_range_table(struct pp_hwmgr *hwmgr, struct pp_atom_ctr return 0; } + +int atomctrl_get_avfs_information(struct pp_hwmgr *hwmgr, struct pp_atom_ctrl__avfs_parameters *param) +{ + ATOM_ASIC_PROFILING_INFO_V3_6 *profile = NULL; + + if (param == NULL) + return -EINVAL; + + profile = (ATOM_ASIC_PROFILING_INFO_V3_6 *) + cgs_atom_get_data_table(hwmgr->device, + GetIndexIntoMasterTable(DATA, ASIC_ProfilingInfo), + NULL, NULL, NULL); + if (!profile) + return -1; + + param->ulAVFS_meanNsigma_Acontant0 = profile->ulAVFS_meanNsigma_Acontant0; + param->ulAVFS_meanNsigma_Acontant1 = profile->ulAVFS_meanNsigma_Acontant1; + param->ulAVFS_meanNsigma_Acontant2 = profile->ulAVFS_meanNsigma_Acontant2; + param->usAVFS_meanNsigma_DC_tol_sigma = profile->usAVFS_meanNsigma_DC_tol_sigma; + param->usAVFS_meanNsigma_Platform_mean = profile->usAVFS_meanNsigma_Platform_mean; + param->usAVFS_meanNsigma_Platform_sigma = profile->usAVFS_meanNsigma_Platform_sigma; + param->ulGB_VDROOP_TABLE_CKSOFF_a0 = profile->ulGB_VDROOP_TABLE_CKSOFF_a0; + param->ulGB_VDROOP_TABLE_CKSOFF_a1 = profile->ulGB_VDROOP_TABLE_CKSOFF_a1; + param->ulGB_VDROOP_TABLE_CKSOFF_a2 = profile->ulGB_VDROOP_TABLE_CKSOFF_a2; + param->ulGB_VDROOP_TABLE_CKSON_a0 = profile->ulGB_VDROOP_TABLE_CKSON_a0; + param->ulGB_VDROOP_TABLE_CKSON_a1 = profile->ulGB_VDROOP_TABLE_CKSON_a1; + param->ulGB_VDROOP_TABLE_CKSON_a2 = profile->ulGB_VDROOP_TABLE_CKSON_a2; + param->ulAVFSGB_FUSE_TABLE_CKSOFF_m1 = profile->ulAVFSGB_FUSE_TABLE_CKSOFF_m1; + param->usAVFSGB_FUSE_TABLE_CKSOFF_m2 = profile->usAVFSGB_FUSE_TABLE_CKSOFF_m2; + param->ulAVFSGB_FUSE_TABLE_CKSOFF_b = profile->ulAVFSGB_FUSE_TABLE_CKSOFF_b; + param->ulAVFSGB_FUSE_TABLE_CKSON_m1 = profile->ulAVFSGB_FUSE_TABLE_CKSON_m1; + param->usAVFSGB_FUSE_TABLE_CKSON_m2 = profile->usAVFSGB_FUSE_TABLE_CKSON_m2; + param->ulAVFSGB_FUSE_TABLE_CKSON_b = profile->ulAVFSGB_FUSE_TABLE_CKSON_b; + param->usMaxVoltage_0_25mv = profile->usMaxVoltage_0_25mv; + param->ucEnableGB_VDROOP_TABLE_CKSOFF = profile->ucEnableGB_VDROOP_TABLE_CKSOFF; + param->ucEnableGB_VDROOP_TABLE_CKSON = profile->ucEnableGB_VDROOP_TABLE_CKSON; + param->ucEnableGB_FUSE_TABLE_CKSOFF = profile->ucEnableGB_FUSE_TABLE_CKSOFF; + param->ucEnableGB_FUSE_TABLE_CKSON = profile->ucEnableGB_FUSE_TABLE_CKSON; + param->usPSM_Age_ComFactor = profile->usPSM_Age_ComFactor; + param->ucEnableApplyAVFS_CKS_OFF_Voltage = profile->ucEnableApplyAVFS_CKS_OFF_Voltage; + + return 0; +} diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h index d24ebb566905..248c5db5f380 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h @@ -250,6 +250,35 @@ struct pp_atomctrl_gpio_pin_assignment { }; typedef struct pp_atomctrl_gpio_pin_assignment pp_atomctrl_gpio_pin_assignment; +struct pp_atom_ctrl__avfs_parameters { + uint32_t ulAVFS_meanNsigma_Acontant0; + uint32_t ulAVFS_meanNsigma_Acontant1; + uint32_t ulAVFS_meanNsigma_Acontant2; + uint16_t usAVFS_meanNsigma_DC_tol_sigma; + uint16_t usAVFS_meanNsigma_Platform_mean; + uint16_t usAVFS_meanNsigma_Platform_sigma; + uint32_t ulGB_VDROOP_TABLE_CKSOFF_a0; + uint32_t ulGB_VDROOP_TABLE_CKSOFF_a1; + uint32_t ulGB_VDROOP_TABLE_CKSOFF_a2; + uint32_t ulGB_VDROOP_TABLE_CKSON_a0; + uint32_t ulGB_VDROOP_TABLE_CKSON_a1; + uint32_t ulGB_VDROOP_TABLE_CKSON_a2; + uint32_t ulAVFSGB_FUSE_TABLE_CKSOFF_m1; + uint16_t usAVFSGB_FUSE_TABLE_CKSOFF_m2; + uint32_t ulAVFSGB_FUSE_TABLE_CKSOFF_b; + uint32_t ulAVFSGB_FUSE_TABLE_CKSON_m1; + uint16_t usAVFSGB_FUSE_TABLE_CKSON_m2; + uint32_t ulAVFSGB_FUSE_TABLE_CKSON_b; + uint16_t usMaxVoltage_0_25mv; + uint8_t ucEnableGB_VDROOP_TABLE_CKSOFF; + uint8_t ucEnableGB_VDROOP_TABLE_CKSON; + uint8_t ucEnableGB_FUSE_TABLE_CKSOFF; + uint8_t ucEnableGB_FUSE_TABLE_CKSON; + uint16_t usPSM_Age_ComFactor; + uint8_t ucEnableApplyAVFS_CKS_OFF_Voltage; + uint8_t ucReserved; +}; + extern bool atomctrl_get_pp_assign_pin(struct pp_hwmgr *hwmgr, const uint32_t pinId, pp_atomctrl_gpio_pin_assignment *gpio_pin_assignment); extern int atomctrl_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, uint32_t sclk, uint16_t virtual_voltage_Id, uint16_t *voltage); extern uint32_t atomctrl_get_mpll_reference_clock(struct pp_hwmgr *hwmgr); @@ -278,5 +307,8 @@ extern int atomctrl_set_ac_timing_ai(struct pp_hwmgr *hwmgr, uint32_t memory_clo extern int atomctrl_get_voltage_evv_on_sclk_ai(struct pp_hwmgr *hwmgr, uint8_t voltage_type, uint32_t sclk, uint16_t virtual_voltage_Id, uint16_t *voltage); extern int atomctrl_get_smc_sclk_range_table(struct pp_hwmgr *hwmgr, struct pp_atom_ctrl_sclk_range_table *table); + +extern int atomctrl_get_avfs_information(struct pp_hwmgr *hwmgr, struct pp_atom_ctrl__avfs_parameters *param); + #endif diff --git a/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h b/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h index 0c6a413eaa5b..d41d37ab5b7c 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h +++ b/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h @@ -27,6 +27,7 @@ #pragma pack(push, 1) +#define PPSMC_MSG_SetGBDroopSettings ((uint16_t) 0x305) #define PPSMC_SWSTATE_FLAG_DC 0x01 #define PPSMC_SWSTATE_FLAG_UVD 0x02 diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c index 043b6ac09d5f..5dba7c509710 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c @@ -52,19 +52,18 @@ static const SMU74_Discrete_GraphicsLevel avfs_graphics_level_polaris10[8] = { /* Min pcie DeepSleep Activity CgSpll CgSpll CcPwr CcPwr Sclk Enabled Enabled Voltage Power */ /* Voltage, DpmLevel, DivId, Level, FuncCntl3, FuncCntl4, DynRm, DynRm1 Did, Padding,ForActivity, ForThrottle, UpHyst, DownHyst, DownHyst, Throttle */ - { 0x3c0fd047, 0x00, 0x03, 0x1e00, 0x00200410, 0x87020000, 0, 0, 0x16, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0x30750000, 0, 0, 0, 0, 0, 0, 0 } }, - { 0xa00fd047, 0x01, 0x04, 0x1e00, 0x00800510, 0x87020000, 0, 0, 0x16, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0x409c0000, 0, 0, 0, 0, 0, 0, 0 } }, - { 0x0410d047, 0x01, 0x00, 0x1e00, 0x00600410, 0x87020000, 0, 0, 0x0e, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0x50c30000, 0, 0, 0, 0, 0, 0, 0 } }, - { 0x6810d047, 0x01, 0x00, 0x1e00, 0x00800410, 0x87020000, 0, 0, 0x0c, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0x60ea0000, 0, 0, 0, 0, 0, 0, 0 } }, - { 0xcc10d047, 0x01, 0x00, 0x1e00, 0x00e00410, 0x87020000, 0, 0, 0x0c, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0xe8fd0000, 0, 0, 0, 0, 0, 0, 0 } }, - { 0x3011d047, 0x01, 0x00, 0x1e00, 0x00400510, 0x87020000, 0, 0, 0x0c, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0x70110100, 0, 0, 0, 0, 0, 0, 0 } }, - { 0x9411d047, 0x01, 0x00, 0x1e00, 0x00a00510, 0x87020000, 0, 0, 0x0c, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0xf8240100, 0, 0, 0, 0, 0, 0, 0 } }, - { 0xf811d047, 0x01, 0x00, 0x1e00, 0x00000610, 0x87020000, 0, 0, 0x0c, 0, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, { 0x80380100, 0, 0, 0, 0, 0, 0, 0 } } + { 0x100ea446, 0x00, 0x03, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x30750000, 0x3000, 0, 0x2600, 0, 0, 0x0004, 0x8f02, 0xffff, 0x2f00, 0x300e, 0x2700 } }, + { 0x400ea446, 0x01, 0x04, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x409c0000, 0x2000, 0, 0x1e00, 1, 1, 0x0004, 0x8300, 0xffff, 0x1f00, 0xcb5e, 0x1a00 } }, + { 0x740ea446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x50c30000, 0x2800, 0, 0x2000, 1, 1, 0x0004, 0x0c02, 0xffff, 0x2700, 0x6433, 0x2100 } }, + { 0xa40ea446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x60ea0000, 0x3000, 0, 0x2600, 1, 1, 0x0004, 0x8f02, 0xffff, 0x2f00, 0x300e, 0x2700 } }, + { 0xd80ea446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x70110100, 0x3800, 0, 0x2c00, 1, 1, 0x0004, 0x1203, 0xffff, 0x3600, 0xc9e2, 0x2e00 } }, + { 0x3c0fa446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x80380100, 0x2000, 0, 0x1e00, 2, 1, 0x0004, 0x8300, 0xffff, 0x1f00, 0xcb5e, 0x1a00 } }, + { 0x6c0fa446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0x905f0100, 0x2400, 0, 0x1e00, 2, 1, 0x0004, 0x8901, 0xffff, 0x2300, 0x314c, 0x1d00 } }, + { 0xa00fa446, 0x01, 0x00, 0x3200, 0, 0, 0, 0, 0, 0, 0x01, 0x01, 0x0a, 0x00, 0x00, 0x00, { 0xa0860100, 0x2800, 0, 0x2000, 2, 1, 0x0004, 0x0c02, 0xffff, 0x2700, 0x6433, 0x2100 } } }; static const SMU74_Discrete_MemoryLevel avfs_memory_level_polaris10 = - {0x50140000, 0x50140000, 0x00320000, 0x00, 0x00, - 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x0000, 0x00, 0x00}; + {0x100ea446, 0, 0x30750000, 0x01, 0x01, 0x01, 0x00, 0x00, 0x64, 0x00, 0x00, 0x1f00, 0x00, 0x00}; /** * Set the address for reading/writing the SMC SRAM space. @@ -219,6 +218,18 @@ bool polaris10_is_smc_ram_running(struct pp_smumgr *smumgr) && (0x20100 <= cgs_read_ind_register(smumgr->device, CGS_IND_REG__SMC, ixSMC_PC_C))); } +static bool polaris10_is_hw_avfs_present(struct pp_smumgr *smumgr) +{ + uint32_t efuse; + + efuse = cgs_read_ind_register(smumgr->device, CGS_IND_REG__SMC, ixSMU_EFUSE_0 + (49*4)); + efuse &= 0x00000001; + if (efuse) + return true; + + return false; +} + /** * Send a message to the SMC, and wait for its response. * @@ -228,21 +239,27 @@ bool polaris10_is_smc_ram_running(struct pp_smumgr *smumgr) */ int polaris10_send_msg_to_smc(struct pp_smumgr *smumgr, uint16_t msg) { + int ret; + if (!polaris10_is_smc_ram_running(smumgr)) return -1; + SMUM_WAIT_FIELD_UNEQUAL(smumgr, SMC_RESP_0, SMC_RESP, 0); - if (1 != SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP)) - printk("Failed to send Previous Message.\n"); + ret = SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP); + if (ret != 1) + printk("\n failed to send pre message %x ret is %d \n", msg, ret); cgs_write_register(smumgr->device, mmSMC_MESSAGE_0, msg); SMUM_WAIT_FIELD_UNEQUAL(smumgr, SMC_RESP_0, SMC_RESP, 0); - if (1 != SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP)) - printk("Failed to send Message.\n"); + ret = SMUM_READ_FIELD(smumgr->device, SMC_RESP_0, SMC_RESP); + + if (ret != 1) + printk("\n failed to send message %x ret is %d \n", msg, ret); return 0; } @@ -953,6 +970,11 @@ static int polaris10_smu_init(struct pp_smumgr *smumgr) (cgs_handle_t)smu_data->smu_buffer.handle); return -1;); + if (polaris10_is_hw_avfs_present(smumgr)) + smu_data->avfs.avfs_btc_status = AVFS_BTC_BOOT; + else + smu_data->avfs.avfs_btc_status = AVFS_BTC_NOTSUPPORTED; + return 0; } -- cgit v1.2.3 From 92d1576859577b94eafaea9b64f78ab99fe20a78 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 7 Jun 2016 14:09:56 +0800 Subject: drm/amdgpu/gfx8: update golden setting for polaris10 Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 9f6f8669edc3..1a5cbaff1e34 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -297,7 +297,8 @@ static const u32 polaris11_golden_common_all[] = static const u32 golden_settings_polaris10_a11[] = { mmATC_MISC_CG, 0x000c0fc0, 0x000c0200, - mmCB_HW_CONTROL, 0xfffdf3cf, 0x00006208, + mmCB_HW_CONTROL, 0xfffdf3cf, 0x00007208, + mmCB_HW_CONTROL_2, 0, 0x0f000000, mmCB_HW_CONTROL_3, 0x000001ff, 0x00000040, mmDB_DEBUG2, 0xf00fffff, 0x00000400, mmPA_SC_ENHANCE, 0xffffffff, 0x20000001, -- cgit v1.2.3 From 270d013659ddab52a6fd0eacae452c422d08aa39 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 7 Jun 2016 18:39:06 +0800 Subject: drm/amd/powerplay: enable clock stretch feature for polaris Power saving feature which reduces the amount of voltage needed for specific engine clocks. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 120 ++++----------------- 1 file changed, 23 insertions(+), 97 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index f730ec8b529d..64ee78f7d41e 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -1759,12 +1759,9 @@ static int polaris10_populate_smc_initailial_state(struct pp_hwmgr *hwmgr) static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr) { - uint32_t ro, efuse, efuse2, clock_freq, volt_without_cks, - volt_with_cks, value; - uint16_t clock_freq_u16; + uint32_t ro, efuse, volt_without_cks, volt_with_cks, value, max, min; struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); - uint8_t type, i, j, cks_setting, stretch_amount, stretch_amount2, - volt_offset = 0; + uint8_t i, stretch_amount, stretch_amount2, volt_offset = 0; struct phm_ppt_v1_information *table_info = (struct phm_ppt_v1_information *)(hwmgr->pptable); struct phm_ppt_v1_clock_voltage_dependency_table *sclk_table = @@ -1776,50 +1773,38 @@ static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr) * if the part is SS or FF. if RO >= 1660MHz, part is FF. */ efuse = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, - ixSMU_EFUSE_0 + (146 * 4)); - efuse2 = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, - ixSMU_EFUSE_0 + (148 * 4)); + ixSMU_EFUSE_0 + (67 * 4)); efuse &= 0xFF000000; efuse = efuse >> 24; - efuse2 &= 0xF; - if (efuse2 == 1) - ro = (2300 - 1350) * efuse / 255 + 1350; - else - ro = (2500 - 1000) * efuse / 255 + 1000; - - if (ro >= 1660) - type = 0; - else - type = 1; + if (hwmgr->chip_id == CHIP_POLARIS10) { + min = 1000; + max = 2300; + } else { + min = 1100; + max = 2100; + } - /* Populate Stretch amount */ - data->smc_state_table.ClockStretcherAmount = stretch_amount; + ro = efuse * (max -min)/255 + min; /* Populate Sclk_CKS_masterEn0_7 and Sclk_voltageOffset */ for (i = 0; i < sclk_table->count; i++) { data->smc_state_table.Sclk_CKS_masterEn0_7 |= sclk_table->entries[i].cks_enable << i; - volt_without_cks = (uint32_t)((14041 * - (sclk_table->entries[i].clk/100) / 10000 + 3571 + 75 - ro) * 1000 / - (4026 - (13924 * (sclk_table->entries[i].clk/100) / 10000))); - volt_with_cks = (uint32_t)((13946 * - (sclk_table->entries[i].clk/100) / 10000 + 3320 + 45 - ro) * 1000 / - (3664 - (11454 * (sclk_table->entries[i].clk/100) / 10000))); + + volt_without_cks = (uint32_t)(((ro - 40) * 1000 - 2753594 - sclk_table->entries[i].clk/100 * 136418 /1000) / \ + (sclk_table->entries[i].clk/100 * 1132925 /10000 - 242418)/100); + + volt_with_cks = (uint32_t)((ro * 1000 -2396351 - sclk_table->entries[i].clk/100 * 329021/1000) / \ + (sclk_table->entries[i].clk/10000 * 649434 /1000 - 18005)/10); + if (volt_without_cks >= volt_with_cks) volt_offset = (uint8_t)(((volt_without_cks - volt_with_cks + sclk_table->entries[i].cks_voffset) * 100 / 625) + 1); + data->smc_state_table.Sclk_voltageOffset[i] = volt_offset; } - PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, PWR_CKS_ENABLE, - STRETCH_ENABLE, 0x0); - PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, PWR_CKS_ENABLE, - masterReset, 0x1); - /* PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, PWR_CKS_ENABLE, staticEnable, 0x1); */ - PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, PWR_CKS_ENABLE, - masterReset, 0x0); - /* Populate CKS Lookup Table */ if (stretch_amount == 1 || stretch_amount == 2 || stretch_amount == 5) stretch_amount2 = 0; @@ -1833,69 +1818,6 @@ static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr) return -EINVAL); } - value = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, - ixPWR_CKS_CNTL); - value &= 0xFFC2FF87; - data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].minFreq = - polaris10_clock_stretcher_lookup_table[stretch_amount2][0]; - data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].maxFreq = - polaris10_clock_stretcher_lookup_table[stretch_amount2][1]; - clock_freq_u16 = (uint16_t)(PP_SMC_TO_HOST_UL(data->smc_state_table. - GraphicsLevel[data->smc_state_table.GraphicsDpmLevelCount - 1].SclkSetting.SclkFrequency) / 100); - if (polaris10_clock_stretcher_lookup_table[stretch_amount2][0] < clock_freq_u16 - && polaris10_clock_stretcher_lookup_table[stretch_amount2][1] > clock_freq_u16) { - /* Program PWR_CKS_CNTL. CKS_USE_FOR_LOW_FREQ */ - value |= (polaris10_clock_stretcher_lookup_table[stretch_amount2][3]) << 16; - /* Program PWR_CKS_CNTL. CKS_LDO_REFSEL */ - value |= (polaris10_clock_stretcher_lookup_table[stretch_amount2][2]) << 18; - /* Program PWR_CKS_CNTL. CKS_STRETCH_AMOUNT */ - value |= (polaris10_clock_stretch_amount_conversion - [polaris10_clock_stretcher_lookup_table[stretch_amount2][3]] - [stretch_amount]) << 3; - } - CONVERT_FROM_HOST_TO_SMC_US(data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].minFreq); - CONVERT_FROM_HOST_TO_SMC_US(data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].maxFreq); - data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].setting = - polaris10_clock_stretcher_lookup_table[stretch_amount2][2] & 0x7F; - data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].setting |= - (polaris10_clock_stretcher_lookup_table[stretch_amount2][3]) << 7; - - cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, - ixPWR_CKS_CNTL, value); - - /* Populate DDT Lookup Table */ - for (i = 0; i < 4; i++) { - /* Assign the minimum and maximum VID stored - * in the last row of Clock Stretcher Voltage Table. - */ - data->smc_state_table.ClockStretcherDataTable.ClockStretcherDataTableEntry[i].minVID = - (uint8_t) polaris10_clock_stretcher_ddt_table[type][i][2]; - data->smc_state_table.ClockStretcherDataTable.ClockStretcherDataTableEntry[i].maxVID = - (uint8_t) polaris10_clock_stretcher_ddt_table[type][i][3]; - /* Loop through each SCLK and check the frequency - * to see if it lies within the frequency for clock stretcher. - */ - for (j = 0; j < data->smc_state_table.GraphicsDpmLevelCount; j++) { - cks_setting = 0; - clock_freq = PP_SMC_TO_HOST_UL( - data->smc_state_table.GraphicsLevel[j].SclkSetting.SclkFrequency); - /* Check the allowed frequency against the sclk level[j]. - * Sclk's endianness has already been converted, - * and it's in 10Khz unit, - * as opposed to Data table, which is in Mhz unit. - */ - if (clock_freq >= (polaris10_clock_stretcher_ddt_table[type][i][0]) * 100) { - cks_setting |= 0x2; - if (clock_freq < (polaris10_clock_stretcher_ddt_table[type][i][1]) * 100) - cks_setting |= 0x1; - } - data->smc_state_table.ClockStretcherDataTable.ClockStretcherDataTableEntry[i].setting - |= cks_setting << (j * 2); - } - CONVERT_FROM_HOST_TO_SMC_US( - data->smc_state_table.ClockStretcherDataTable.ClockStretcherDataTableEntry[i].setting); - } - value = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixPWR_CKS_CNTL); value &= 0xFFFFFFFE; cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixPWR_CKS_CNTL, value); @@ -3062,6 +2984,10 @@ int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) data->vddci_control = POLARIS10_VOLTAGE_CONTROL_BY_SVID2; } + if (table_info->cac_dtp_table->usClockStretchAmount != 0) + phm_cap_set(hwmgr->platform_descriptor.platformCaps, + PHM_PlatformCaps_ClockStretcher); + polaris10_set_features_platform_caps(hwmgr); polaris10_init_dpm_defaults(hwmgr); -- cgit v1.2.3 From 34511dce4b35685d3988d5c8b100d11a068db5bd Mon Sep 17 00:00:00 2001 From: Mika Kahola Date: Mon, 20 Jun 2016 11:10:26 +0300 Subject: drm/i915: Revert DisplayPort fast link training feature It has been found out that in some HW combination the DisplayPort fast link training feature caused screen flickering. Let's revert this feature for now until we can ensure that the feature works for all platforms. This is a manual revert of commits 5fa836a9d859 ("drm/i915: DP link training optimization") and 4e96c97742f4 ("drm/i915: eDP link training optimization"). Fixes: 5fa836a9d859 ("drm/i915: DP link training optimization") Fixes: 4e96c97742f4 ("drm/i915: eDP link training optimization") Cc: # v4.2+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91393 Reviewed-by: Jani Nikula Signed-off-by: Mika Kahola Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1466410226-19543-1-git-send-email-mika.kahola@intel.com (cherry picked from commit 91df09d92ad82c8778ca218097bf827f154292ca) --- drivers/gpu/drm/i915/intel_dp.c | 3 --- drivers/gpu/drm/i915/intel_dp_link_training.c | 26 ++------------------------ drivers/gpu/drm/i915/intel_drv.h | 2 -- 3 files changed, 2 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index ffe5f8430957..79cf2d5f5a20 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4977,9 +4977,6 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) intel_display_power_get(dev_priv, power_domain); if (long_hpd) { - /* indicate that we need to restart link training */ - intel_dp->train_set_valid = false; - intel_dp_long_pulse(intel_dp->attached_connector); if (intel_dp->is_mst) ret = IRQ_HANDLED; diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c index 0b8eefc2acc5..60fb39cd220b 100644 --- a/drivers/gpu/drm/i915/intel_dp_link_training.c +++ b/drivers/gpu/drm/i915/intel_dp_link_training.c @@ -85,8 +85,7 @@ static bool intel_dp_reset_link_train(struct intel_dp *intel_dp, uint8_t dp_train_pat) { - if (!intel_dp->train_set_valid) - memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set)); + memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set)); intel_dp_set_signal_levels(intel_dp); return intel_dp_set_link_train(intel_dp, dp_train_pat); } @@ -161,23 +160,6 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp) break; } - /* - * if we used previously trained voltage and pre-emphasis values - * and we don't get clock recovery, reset link training values - */ - if (intel_dp->train_set_valid) { - DRM_DEBUG_KMS("clock recovery not ok, reset"); - /* clear the flag as we are not reusing train set */ - intel_dp->train_set_valid = false; - if (!intel_dp_reset_link_train(intel_dp, - DP_TRAINING_PATTERN_1 | - DP_LINK_SCRAMBLING_DISABLE)) { - DRM_ERROR("failed to enable link training\n"); - return; - } - continue; - } - /* Check to see if we've tried the max voltage */ for (i = 0; i < intel_dp->lane_count; i++) if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) @@ -284,7 +266,6 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp) /* Make sure clock is still ok */ if (!drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) { - intel_dp->train_set_valid = false; intel_dp_link_training_clock_recovery(intel_dp); intel_dp_set_link_train(intel_dp, training_pattern | @@ -301,7 +282,6 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp) /* Try 5 times, then try clock recovery if that fails */ if (tries > 5) { - intel_dp->train_set_valid = false; intel_dp_link_training_clock_recovery(intel_dp); intel_dp_set_link_train(intel_dp, training_pattern | @@ -322,10 +302,8 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp) intel_dp_set_idle_link_train(intel_dp); - if (channel_eq) { - intel_dp->train_set_valid = true; + if (channel_eq) DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n"); - } } void intel_dp_stop_link_train(struct intel_dp *intel_dp) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 4a24b0067a3a..f7f0f01814f6 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -863,8 +863,6 @@ struct intel_dp { /* This is called before a link training is starterd */ void (*prepare_link_retrain)(struct intel_dp *intel_dp); - bool train_set_valid; - /* Displayport compliance testing */ unsigned long compliance_test_type; unsigned long compliance_test_data; -- cgit v1.2.3 From 1e3fa0acfec677e915d7de5ac6e1f18cfa4f805b Mon Sep 17 00:00:00 2001 From: Lyude Date: Thu, 9 Jun 2016 11:58:15 -0400 Subject: drm/i915/fbc: Disable on HSW by default for now >From https://bugs.freedesktop.org/show_bug.cgi?id=96461 : This was kind of a difficult bug to track down. If you're using a Haswell system running GNOME and you have fbc completely enabled and working, playing videos can result in video artifacts. Steps to reproduce: - Run GNOME - Ensure FBC is enabled and active - Download a movie, I used the ogg version of Big Buck Bunny for this - Run `gst-launch-1.0 filesrc location='some_movie.ogg' ! decodebin ! glimagesink` in a terminal - Watch for about over a minute, you'll see small horizontal lines go down the screen. For the time being, disable FBC for Haswell by default. Stefan Richter reported kernel freezes (no video artifacts) when fbc is on. (E3-1245 v3 with HD P4600; openbox and some KDE and LXDE applications, thread begins at https://lkml.org/lkml/2016/4/26/813). We also got reports from Steven Honeyman on openbox+roxterm. v2 (From Paulo): - Add extra information to the commit message - Add Fixes tag - Rebase Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96461 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96464 Fixes: a98ee79317b4 ("drm/i915/fbc: enable FBC by default on HSW and BDW") Cc: stable@vger.kernel.org Reviewed-by: Paulo Zanoni Signed-off-by: Lyude Signed-off-by: Paulo Zanoni Link: http://patchwork.freedesktop.org/patch/msgid/1465487895-7401-1-git-send-email-cpaul@redhat.com (cherry picked from commit c7f7e2feffb0294302041507dfd5fc15f01afccc) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_fbc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_fbc.c b/drivers/gpu/drm/i915/intel_fbc.c index d5a7cfec589b..647127f3aaff 100644 --- a/drivers/gpu/drm/i915/intel_fbc.c +++ b/drivers/gpu/drm/i915/intel_fbc.c @@ -824,8 +824,7 @@ static bool intel_fbc_can_choose(struct intel_crtc *crtc) { struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; struct intel_fbc *fbc = &dev_priv->fbc; - bool enable_by_default = IS_HASWELL(dev_priv) || - IS_BROADWELL(dev_priv); + bool enable_by_default = IS_BROADWELL(dev_priv); if (intel_vgpu_active(dev_priv->dev)) { fbc->no_fbc_reason = "VGPU is active"; -- cgit v1.2.3 From 2f38b1b16d9280689e5cfa47a4c50956bf437f0d Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Tue, 21 Jun 2016 12:34:15 +0800 Subject: ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading The new module-level code (MLC) approach invokes MLC on the per-table basis, but the dynamic loading support of this is incorrect because of the lock order: acpi_ns_evaluate acpi_ex_enter_intperter acpi_ns_load_table (triggered by Load opcode) acpi_ns_exec_module_code_list acpi_ex_enter_intperter The regression is introduced by the following commit: Commit: 2785ce8d0da1cac9d8f78615e116cf929e9a9123 ACPICA Commit: 071eff738c59eda1792ac24b3b688b61691d7e7c Subject: ACPICA: Add per-table execution of module-level code This patch fixes this regression by unlocking the interpreter lock before invoking MLC. However, the unlocking is done to the acpi_ns_load_table(), in which the interpreter lock should be locked by acpi_ns_parse_table() but it wasn't. Fixes: 2785ce8d0da1 (ACPICA: Add per-table execution of module-level code) Reported-by: Mika Westerberg Tested-by: Mika Westerberg Signed-off-by: Lv Zheng Cc: 4.5+ # 4.5+ [ rjw : Subject ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/exconfig.c | 2 ++ drivers/acpi/acpica/nsparse.c | 9 +++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c index a1d177d58254..21932d640a41 100644 --- a/drivers/acpi/acpica/exconfig.c +++ b/drivers/acpi/acpica/exconfig.c @@ -108,7 +108,9 @@ acpi_ex_add_table(u32 table_index, /* Add the table to the namespace */ + acpi_ex_exit_interpreter(); status = acpi_ns_load_table(table_index, parent_node); + acpi_ex_enter_interpreter(); if (ACPI_FAILURE(status)) { acpi_ut_remove_reference(obj_desc); *ddb_handle = NULL; diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c index f631a47724f0..1783cd7e1446 100644 --- a/drivers/acpi/acpica/nsparse.c +++ b/drivers/acpi/acpica/nsparse.c @@ -47,6 +47,7 @@ #include "acparser.h" #include "acdispat.h" #include "actables.h" +#include "acinterp.h" #define _COMPONENT ACPI_NAMESPACE ACPI_MODULE_NAME("nsparse") @@ -170,6 +171,8 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) ACPI_FUNCTION_TRACE(ns_parse_table); + acpi_ex_enter_interpreter(); + /* * AML Parse, pass 1 * @@ -185,7 +188,7 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS1, table_index, start_node); if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); + goto error_exit; } /* @@ -201,8 +204,10 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS2, table_index, start_node); if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); + goto error_exit; } +error_exit: + acpi_ex_exit_interpreter(); return_ACPI_STATUS(status); } -- cgit v1.2.3 From 3e1d7fb0d279fea19eb4e36cc9bddf89264ba03f Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Fri, 2 Oct 2015 12:39:23 +0900 Subject: PM / devfreq: devm_kzalloc to have dev pointer more precisely devm_kzalloc of devfreq's statistics data structure has been using its parent device as the dev allocated for. If a device's devfreq is disabled in run-time, such allocated memory won't be freed. Desginating more precisely with the devfreq device pointer fixes the issue. Signed-off-by: MyungJoo Ham --- drivers/devfreq/devfreq.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 1d6c803804d5..380173738a1d 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -561,15 +561,6 @@ struct devfreq *devfreq_add_device(struct device *dev, mutex_lock(&devfreq->lock); } - devfreq->trans_table = devm_kzalloc(dev, sizeof(unsigned int) * - devfreq->profile->max_state * - devfreq->profile->max_state, - GFP_KERNEL); - devfreq->time_in_state = devm_kzalloc(dev, sizeof(unsigned long) * - devfreq->profile->max_state, - GFP_KERNEL); - devfreq->last_stat_updated = jiffies; - dev_set_name(&devfreq->dev, "%s", dev_name(dev)); err = device_register(&devfreq->dev); if (err) { @@ -578,6 +569,15 @@ struct devfreq *devfreq_add_device(struct device *dev, goto err_out; } + devfreq->trans_table = devm_kzalloc(&devfreq->dev, sizeof(unsigned int) * + devfreq->profile->max_state * + devfreq->profile->max_state, + GFP_KERNEL); + devfreq->time_in_state = devm_kzalloc(&devfreq->dev, sizeof(unsigned long) * + devfreq->profile->max_state, + GFP_KERNEL); + devfreq->last_stat_updated = jiffies; + srcu_init_notifier_head(&devfreq->transition_notifier_list); mutex_unlock(&devfreq->lock); -- cgit v1.2.3 From ac4b281176a54d17dd3f91b7fb4a4656471d8730 Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Fri, 2 Oct 2015 12:48:54 +0900 Subject: PM / devfreq: fix duplicated kfree on devfreq pointer device_unregister() calls kfree already. Signed-off-by: MyungJoo Ham --- drivers/devfreq/devfreq.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 380173738a1d..6f33c1e89a14 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -603,7 +603,6 @@ struct devfreq *devfreq_add_device(struct device *dev, err_init: list_del(&devfreq->node); device_unregister(&devfreq->dev); - kfree(devfreq); err_out: return ERR_PTR(err); } -- cgit v1.2.3 From a5e9b937fa91b3f404618b5281c3239bd1f09c7b Mon Sep 17 00:00:00 2001 From: Cai Zhiyong Date: Sat, 14 May 2016 14:13:30 +0800 Subject: PM / devfreq: fix double call put_device 1295 */ 1296 void device_unregister(struct device *dev) 1297 { 1298 pr_debug("device: '%s': %s\n", dev_name(dev), __func__); 1299 device_del(dev); 1300 put_device(dev); 1301 } 1302 EXPORT_SYMBOL_GPL(device_unregister); 1303 device_unregister is called put_device, there is no need to call put_device(&devfreq->dev) again. Signed-off-by: Cai Zhiyong Reviewed-by: Chanwoo Choi Signed-off-by: MyungJoo Ham --- drivers/devfreq/devfreq.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 6f33c1e89a14..3e1afb4ac77c 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -620,7 +620,6 @@ int devfreq_remove_device(struct devfreq *devfreq) return -EINVAL; device_unregister(&devfreq->dev); - put_device(&devfreq->dev); return 0; } -- cgit v1.2.3 From 67ffdb529b4ec9833f73947dec01eaa78dd53c3d Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Mon, 16 May 2016 11:41:57 +0900 Subject: PM / devfreq: remove double put_device When device_register() returns with error, it has already done put_device() on the input device pointer. Signed-off-by: MyungJoo Ham --- drivers/devfreq/devfreq.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 3e1afb4ac77c..0ebd64dfc0a9 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -564,7 +564,6 @@ struct devfreq *devfreq_add_device(struct device *dev, dev_set_name(&devfreq->dev, "%s", dev_name(dev)); err = device_register(&devfreq->dev); if (err) { - put_device(&devfreq->dev); mutex_unlock(&devfreq->lock); goto err_out; } -- cgit v1.2.3 From 674789dd2c4b53ed368dc81ae22d72ac4fdb92ec Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 26 May 2016 09:45:42 +0300 Subject: PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check Smatch complains because platform_get_resource() returns NULL on error and not an error pointer so the check is wrong. Julia Lawall pointed out that normally we don't check these, because devm_ioremap_resource() has a check for NULL. Signed-off-by: Dan Carpenter Reviewed-by: Julia Lawall Signed-off-by: MyungJoo Ham --- drivers/devfreq/event/exynos-nocp.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/devfreq/event/exynos-nocp.c b/drivers/devfreq/event/exynos-nocp.c index 6b6a5f310486..a5841403bde8 100644 --- a/drivers/devfreq/event/exynos-nocp.c +++ b/drivers/devfreq/event/exynos-nocp.c @@ -220,9 +220,6 @@ static int exynos_nocp_parse_dt(struct platform_device *pdev, /* Maps the memory mapped IO to control nocp register */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (IS_ERR(res)) - return PTR_ERR(res); - base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) return PTR_ERR(base); -- cgit v1.2.3 From 8d39fc085d268a56486066a3deca94745f804f2d Mon Sep 17 00:00:00 2001 From: Lukasz Luba Date: Tue, 31 May 2016 11:25:09 +0100 Subject: PM / devfreq: fix initialization of current frequency in last status Some systems need current frequency from last_status for calculation but it is zeroed during initialization. When the device starts there is no history, but we can assume that the last frequency was the same as the initial frequency (which is also used in 'previous_freq'). The log shows the result of this misinterpreted value. [ 2.042847] ... Failed to get voltage for frequency 0: -34 Signed-off-by: Lukasz Luba Reviewed-by: Javi Merino Signed-off-by: MyungJoo Ham --- drivers/devfreq/devfreq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 0ebd64dfc0a9..c7f47e34807b 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -552,6 +552,7 @@ struct devfreq *devfreq_add_device(struct device *dev, devfreq->profile = profile; strncpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN); devfreq->previous_freq = profile->initial_freq; + devfreq->last_status.current_frequency = profile->initial_freq; devfreq->data = data; devfreq->nb.notifier_call = devfreq_notifier_call; -- cgit v1.2.3 From 04e59a0211ff012ba60c00baca673482570784e9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 18 Jun 2016 11:31:33 +0200 Subject: phy-sun4i-usb: Fix irq free conditions to match request conditions commit 5cf700ac9d50 ("phy: phy-sun4i-usb: Fix optional gpios failing probe") changed the condition under which irqs are requested, but omitted matching changes to sun4i_usb_phy_remove(). This commit fixes this. Fixes: 5cf700ac9d50 ("phy: phy-sun4i-usb: Fix optional gpios failing probe") Signed-off-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 739029430dda..de3101fbbf40 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -514,9 +514,9 @@ static int sun4i_usb_phy_remove(struct platform_device *pdev) if (data->vbus_power_nb_registered) power_supply_unreg_notifier(&data->vbus_power_nb); - if (data->id_det_irq >= 0) + if (data->id_det_irq > 0) devm_free_irq(dev, data->id_det_irq, data); - if (data->vbus_det_irq >= 0) + if (data->vbus_det_irq > 0) devm_free_irq(dev, data->vbus_det_irq, data); cancel_delayed_work_sync(&data->detect); -- cgit v1.2.3 From ba562d5e54fd3136bfea0457add3675850247774 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 1 Jun 2016 22:21:53 +0300 Subject: pinctrl: imx: Do not treat a PIN without MUX register as an error Some PINs do not have a MUX register, it is not an error. It is necessary to allow the continuation of the PINs configuration, otherwise the whole PIN-group will be configured incorrectly. Cc: stable@vger.kernel.org Signed-off-by: Alexander Shiyan Signed-off-by: Linus Walleij --- drivers/pinctrl/freescale/pinctrl-imx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c index 47ccfcc8a647..eccb47480e1d 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.c +++ b/drivers/pinctrl/freescale/pinctrl-imx.c @@ -209,9 +209,9 @@ static int imx_pmx_set(struct pinctrl_dev *pctldev, unsigned selector, pin_reg = &info->pin_regs[pin_id]; if (pin_reg->mux_reg == -1) { - dev_err(ipctl->dev, "Pin(%s) does not support mux function\n", + dev_dbg(ipctl->dev, "Pin(%s) does not support mux function\n", info->pins[pin_id].name); - return -EINVAL; + continue; } if (info->flags & SHARE_MUX_CONF_REG) { -- cgit v1.2.3 From 0ac3c0a4025f41748a083bdd4970cb3ede802b15 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 14:17:06 -0700 Subject: pinctrl: single: Fix missing flush of posted write for a wakeirq With many repeated suspend resume cycles, the pin specific wakeirq may not always work on omaps. This is because the write to enable the pin interrupt may not have reached the device over the interconnect before suspend happens. Let's fix the issue with a flush of posted write with a readback. Cc: stable@vger.kernel.org Reported-by: Nishanth Menon Signed-off-by: Tony Lindgren Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-single.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index cf9bafa10acf..bfdf720db270 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -1580,6 +1580,9 @@ static inline void pcs_irq_set(struct pcs_soc_data *pcs_soc, else mask &= ~soc_mask; pcs->write(mask, pcswi->reg); + + /* flush posted write */ + mask = pcs->read(pcswi->reg); raw_spin_unlock(&pcs->lock); } -- cgit v1.2.3 From 9ee8ff4867d07a6429991a0b748fa9c1586a7764 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 6 Jun 2016 18:56:27 +0200 Subject: gpio: tegra: Make lockdep class file-scoped Commit b546be0db955 ("gpio: tegra: Get rid of all file scoped global variables") moved all file scoped variables into the driver-private structure to allow potentially multiple instances of the driver. The change also included turning the lockdep class into a driver-private field, which doesn't work and produces error messages such as this: [ 0.142310] BUG: key ffff8000fb3f7ab0 not in .data! Make the lockdep class file-scoped again to fix this issue. Signed-off-by: Thierry Reding Signed-off-by: Linus Walleij --- drivers/gpio/gpio-tegra.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index ec891a27952f..661b0e34e067 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -98,7 +98,6 @@ struct tegra_gpio_info { const struct tegra_gpio_soc_config *soc; struct gpio_chip gc; struct irq_chip ic; - struct lock_class_key lock_class; u32 bank_count; }; @@ -547,6 +546,12 @@ static const struct dev_pm_ops tegra_gpio_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(tegra_gpio_suspend, tegra_gpio_resume) }; +/* + * This lock class tells lockdep that GPIO irqs are in a different category + * than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + static int tegra_gpio_probe(struct platform_device *pdev) { const struct tegra_gpio_soc_config *config; @@ -660,7 +665,7 @@ static int tegra_gpio_probe(struct platform_device *pdev) bank = &tgi->bank_info[GPIO_BANK(gpio)]; - irq_set_lockdep_class(irq, &tgi->lock_class); + irq_set_lockdep_class(irq, &gpio_lock_class); irq_set_chip_data(irq, bank); irq_set_chip_and_handler(irq, &tgi->ic, handle_simple_irq); } -- cgit v1.2.3 From 19b5a91764fddcc51b2f8e54a81d4ef231980181 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 4 Jun 2016 14:35:56 +0800 Subject: pinctrl: tegra: Fix build dependency I got below build error: ERROR: "tegra_xusb_padctl_legacy_probe" [drivers/phy/tegra/phy-tegra-xusb.ko] undefined! with below build configuration: CONFIG_ARCH_TEGRA=y CONFIG_PINCTRL_TEGRA_XUSB=y CONFIG_PHY_TEGRA_XUSB=y The problem is below line in drivers/pinctrl/Makefile obj-$(CONFIG_PINCTRL_TEGRA) += tegra/ So even CONFIG_PINCTRL_TEGRA_XUSB=y is set, kbuild still does not compile the code in drivers/pinctrl/tegra folder if !CONFIG_PINCTRL_TEGRA. phy-tegra-xusb.c does not use any symbol from pinctrl-tegra.c, so build pinctrl-tegra.c only when CONFIG_PINCTRL_TEGRA is set. Signed-off-by: Axel Lin Acked-by: Jon Hunter Signed-off-by: Linus Walleij --- drivers/pinctrl/Makefile | 2 +- drivers/pinctrl/tegra/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index e4bc1151e04f..42a5c1dddfef 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_SIRF) += sirf/ -obj-$(CONFIG_PINCTRL_TEGRA) += tegra/ +obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_PINCTRL_TZ1090) += pinctrl-tz1090.o obj-$(CONFIG_PINCTRL_TZ1090_PDC) += pinctrl-tz1090-pdc.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o diff --git a/drivers/pinctrl/tegra/Makefile b/drivers/pinctrl/tegra/Makefile index a927379b6794..d9ea2be69cc4 100644 --- a/drivers/pinctrl/tegra/Makefile +++ b/drivers/pinctrl/tegra/Makefile @@ -1,4 +1,4 @@ -obj-y += pinctrl-tegra.o +obj-$(CONFIG_PINCTRL_TEGRA) += pinctrl-tegra.o obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o obj-$(CONFIG_PINCTRL_TEGRA114) += pinctrl-tegra114.o -- cgit v1.2.3 From 942f64c4c2be19a1b4a0c4295182b42d153899bf Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Mon, 20 Jun 2016 11:53:20 +0300 Subject: team: Fix possible deadlock during team enslave Both dev_uc_sync_multiple() and dev_mc_sync_multiple() require the source device to be locked by netif_addr_lock_bh(), but this is missing in team's enslave function, so add it. This fixes the following lockdep warning: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(_xmit_ETHER/1); local_irq_disable(); lock(&(&mc->mca_lock)->rlock); lock(&team_netdev_addr_lock_key); lock(&(&mc->mca_lock)->rlock); *** DEADLOCK *** Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/team/team.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 2ace126533cd..fdee77207323 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1203,8 +1203,10 @@ static int team_port_add(struct team *team, struct net_device *port_dev) goto err_dev_open; } + netif_addr_lock_bh(dev); dev_uc_sync_multiple(port_dev, dev); dev_mc_sync_multiple(port_dev, dev); + netif_addr_unlock_bh(dev); err = vlan_vids_add_by_dev(port_dev, dev); if (err) { -- cgit v1.2.3 From 93c098af09455ea7bdc6f0f6b08f6ac14fa06cf4 Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Tue, 21 Jun 2016 14:20:02 +0300 Subject: net/mlx4_en: Fix the return value of a failure in VLAN VID add/kill Modify mlx4_en_vlan_rx_[add/kill]_vid to return error value in case of failure. Fixes: 8e586137e6b6 ('net: make vlan ndo_vlan_rx_[add/kill]_vid return error value') Signed-off-by: Kamal Heib Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index a2c25365a8a3..43f505e2d291 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -406,14 +406,18 @@ static int mlx4_en_vlan_rx_add_vid(struct net_device *dev, mutex_lock(&mdev->state_lock); if (mdev->device_up && priv->port_up) { err = mlx4_SET_VLAN_FLTR(mdev->dev, priv); - if (err) + if (err) { en_err(priv, "Failed configuring VLAN filter\n"); + goto out; + } } - if (mlx4_register_vlan(mdev->dev, priv->port, vid, &idx)) - en_dbg(HW, priv, "failed adding vlan %d\n", vid); - mutex_unlock(&mdev->state_lock); + err = mlx4_register_vlan(mdev->dev, priv->port, vid, &idx); + if (err) + en_dbg(HW, priv, "Failed adding vlan %d\n", vid); - return 0; +out: + mutex_unlock(&mdev->state_lock); + return err; } static int mlx4_en_vlan_rx_kill_vid(struct net_device *dev, @@ -421,7 +425,7 @@ static int mlx4_en_vlan_rx_kill_vid(struct net_device *dev, { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; - int err; + int err = 0; en_dbg(HW, priv, "Killing VID:%d\n", vid); @@ -438,7 +442,7 @@ static int mlx4_en_vlan_rx_kill_vid(struct net_device *dev, } mutex_unlock(&mdev->state_lock); - return 0; + return err; } static void mlx4_en_u64_to_mac(unsigned char dst_mac[ETH_ALEN + 2], u64 src_mac) -- cgit v1.2.3 From 9d76931180557270796f9631e2c79b9c7bb3c9fb Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Tue, 21 Jun 2016 14:20:03 +0300 Subject: net/mlx4_en: Avoid unregister_netdev at shutdown flow This allows a clean shutdown, even if some netdev clients do not release their reference from this netdev. It is enough to release the HW resources only as the kernel is shutting down. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Eran Ben Elisha Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 17 +++++++++++++++-- drivers/net/ethernet/mellanox/mlx4/main.c | 5 ++++- include/linux/mlx4/device.h | 1 + 3 files changed, 20 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 43f505e2d291..0c0dfd6cdca6 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2036,11 +2036,20 @@ err: return -ENOMEM; } +static void mlx4_en_shutdown(struct net_device *dev) +{ + rtnl_lock(); + netif_device_detach(dev); + mlx4_en_close(dev); + rtnl_unlock(); +} void mlx4_en_destroy_netdev(struct net_device *dev) { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; + bool shutdown = mdev->dev->persist->interface_state & + MLX4_INTERFACE_STATE_SHUTDOWN; en_dbg(DRV, priv, "Destroying netdev on port:%d\n", priv->port); @@ -2048,7 +2057,10 @@ void mlx4_en_destroy_netdev(struct net_device *dev) if (priv->registered) { devlink_port_type_clear(mlx4_get_devlink_port(mdev->dev, priv->port)); - unregister_netdev(dev); + if (shutdown) + mlx4_en_shutdown(dev); + else + unregister_netdev(dev); } if (priv->allocated) @@ -2073,7 +2085,8 @@ void mlx4_en_destroy_netdev(struct net_device *dev) kfree(priv->tx_ring); kfree(priv->tx_cq); - free_netdev(dev); + if (!shutdown) + free_netdev(dev); } static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu) diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 372ebfa880f5..546fab0ecc3b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -4135,8 +4135,11 @@ static void mlx4_shutdown(struct pci_dev *pdev) mlx4_info(persist->dev, "mlx4_shutdown was called\n"); mutex_lock(&persist->interface_state_mutex); - if (persist->interface_state & MLX4_INTERFACE_STATE_UP) + if (persist->interface_state & MLX4_INTERFACE_STATE_UP) { + /* Notify mlx4 clients that the kernel is being shut down */ + persist->interface_state |= MLX4_INTERFACE_STATE_SHUTDOWN; mlx4_unload_one(pdev); + } mutex_unlock(&persist->interface_state_mutex); } diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 80dec87a94f8..d46a0e7f144d 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -466,6 +466,7 @@ enum { enum { MLX4_INTERFACE_STATE_UP = 1 << 0, MLX4_INTERFACE_STATE_DELETION = 1 << 1, + MLX4_INTERFACE_STATE_SHUTDOWN = 1 << 2, }; #define MSTR_SM_CHANGE_MASK (MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK | \ -- cgit v1.2.3 From 0b305ccc1b545d3389068ddc3548cbc877513b97 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 13 Jun 2016 13:48:53 +0800 Subject: gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock Fixes: 9ae482104cb9 ("gpio: 104-idi-48: Clear pending interrupt once in IRQ handler") Signed-off-by: Axel Lin Acked-by: William Breathitt Gray Signed-off-by: Linus Walleij --- drivers/gpio/gpio-104-idi-48.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c index 6c75c83baf5a..2d2763ea1a68 100644 --- a/drivers/gpio/gpio-104-idi-48.c +++ b/drivers/gpio/gpio-104-idi-48.c @@ -247,6 +247,7 @@ static int idi_48_probe(struct device *dev, unsigned int id) idi48gpio->irq = irq[id]; spin_lock_init(&idi48gpio->lock); + spin_lock_init(&idi48gpio->ack_lock); dev_set_drvdata(dev, idi48gpio); -- cgit v1.2.3 From 39243ee771666e02201ba89c1d76fdc28e9cf681 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 15 Jun 2016 22:57:38 +0200 Subject: gpio: make sure gpiod_to_irq() returns negative on NULL desc commit 54d77198fdfbc4f0fe11b4252c1d9c97d51a3264 ("gpio: bail out silently on NULL descriptors") doesn't work for gpiod_to_irq(): drivers assume that NULL descriptors will give negative IRQ numbers in return. It has been pointed out that returning 0 is NO_IRQ and that drivers should be amended to treat this as an error, but that is for the longer term: now let us repair the semantics. Cc: Maxime Ripard Reported-by: Hans de Goede Tested-by: Hans de Goede Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 58d822d7e8da..f39bf05993e7 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2056,7 +2056,14 @@ int gpiod_to_irq(const struct gpio_desc *desc) struct gpio_chip *chip; int offset; - VALIDATE_DESC(desc); + /* + * Cannot VALIDATE_DESC() here as gpiod_to_irq() consumer semantics + * requires this function to not return zero on an invalid descriptor + * but rather a negative error number. + */ + if (!desc || !desc->gdev || !desc->gdev->chip) + return -EINVAL; + chip = desc->gdev->chip; offset = gpio_chip_hwgpio(desc); if (chip->to_irq) { -- cgit v1.2.3 From c0a1ecb9f4e208f4b75d88fa9669748e3fd705ab Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 16 Jun 2016 11:55:55 +0200 Subject: gpio: make library immune to error pointers Most functions that take a GPIO descriptor in need to check the descriptor for IS_ERR(). We do this mostly in the VALIDATE_DESC() macro except for the gpiod_to_irq() function which needs special handling. Cc: stable@vger.kernel.org Reported-by: Grygorii Strashko Reviewed-by: Grygorii Strashko Acked-by: Alexandre Courbot Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index f39bf05993e7..570771ed19e6 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1373,8 +1373,12 @@ done: #define VALIDATE_DESC(desc) do { \ if (!desc) \ return 0; \ + if (IS_ERR(desc)) { \ + pr_warn("%s: invalid GPIO (errorpointer)\n", __func__); \ + return PTR_ERR(desc); \ + } \ if (!desc->gdev) { \ - pr_warn("%s: invalid GPIO\n", __func__); \ + pr_warn("%s: invalid GPIO (no device)\n", __func__); \ return -EINVAL; \ } \ if ( !desc->gdev->chip ) { \ @@ -1386,8 +1390,12 @@ done: #define VALIDATE_DESC_VOID(desc) do { \ if (!desc) \ return; \ + if (IS_ERR(desc)) { \ + pr_warn("%s: invalid GPIO (errorpointer)\n", __func__); \ + return; \ + } \ if (!desc->gdev) { \ - pr_warn("%s: invalid GPIO\n", __func__); \ + pr_warn("%s: invalid GPIO (no device)\n", __func__); \ return; \ } \ if (!desc->gdev->chip) { \ @@ -2061,7 +2069,7 @@ int gpiod_to_irq(const struct gpio_desc *desc) * requires this function to not return zero on an invalid descriptor * but rather a negative error number. */ - if (!desc || !desc->gdev || !desc->gdev->chip) + if (!desc || IS_ERR(desc) || !desc->gdev || !desc->gdev->chip) return -EINVAL; chip = desc->gdev->chip; -- cgit v1.2.3 From 972228d87445dc46c0a01f5f3de673ac017626f7 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Tue, 21 Jun 2016 00:31:50 +0200 Subject: ubi: Make recover_peb power cut aware MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit recover_peb() was never power cut aware, if a power cut happened right after writing the VID header upon next attach UBI would blindly use the new partial written PEB and all data from the old PEB is lost. In order to make recover_peb() power cut aware, write the new VID with a proper crc and copy_flag set such that the UBI attach process will detect whether the new PEB is completely written or not. We cannot directly use ubi_eba_atomic_leb_change() since we'd have to unlock the LEB which is facing a write error. Cc: stable@vger.kernel.org Reported-by: Jörg Pfähler Reviewed-by: Jörg Pfähler Signed-off-by: Richard Weinberger --- drivers/mtd/ubi/eba.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index 5780dd1ba79d..ebf517271d29 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -575,6 +575,7 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum, int err, idx = vol_id2idx(ubi, vol_id), new_pnum, data_size, tries = 0; struct ubi_volume *vol = ubi->volumes[idx]; struct ubi_vid_hdr *vid_hdr; + uint32_t crc; vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS); if (!vid_hdr) @@ -599,14 +600,8 @@ retry: goto out_put; } - vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi)); - err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr); - if (err) { - up_read(&ubi->fm_eba_sem); - goto write_error; - } + ubi_assert(vid_hdr->vol_type == UBI_VID_DYNAMIC); - data_size = offset + len; mutex_lock(&ubi->buf_mutex); memset(ubi->peb_buf + offset, 0xFF, len); @@ -621,6 +616,19 @@ retry: memcpy(ubi->peb_buf + offset, buf, len); + data_size = offset + len; + crc = crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size); + vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi)); + vid_hdr->copy_flag = 1; + vid_hdr->data_size = cpu_to_be32(data_size); + vid_hdr->data_crc = cpu_to_be32(crc); + err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr); + if (err) { + mutex_unlock(&ubi->buf_mutex); + up_read(&ubi->fm_eba_sem); + goto write_error; + } + err = ubi_io_write_data(ubi, ubi->peb_buf, new_pnum, 0, data_size); if (err) { mutex_unlock(&ubi->buf_mutex); -- cgit v1.2.3 From bce271f255dae8335dc4d2ee2c4531e09cc67f5a Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Tue, 21 Jun 2016 12:14:07 +0200 Subject: can: fix handling of unmodifiable configuration options fix With upstream commit bb208f144cf3f59 (can: fix handling of unmodifiable configuration options) a new can_validate() function was introduced. When invoking 'ip link set can0 type can' without any configuration data can_validate() tries to validate the content without taking into account that there's totally no content. This patch adds a check for missing content. Reported-by: ajneu Signed-off-by: Oliver Hartkopp Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 910c12e2638e..348dd5001fa4 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -798,6 +798,9 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[]) * - control mode with CAN_CTRLMODE_FD set */ + if (!data) + return 0; + if (data[IFLA_CAN_CTRLMODE]) { struct can_ctrlmode *cm = nla_data(data[IFLA_CAN_CTRLMODE]); -- cgit v1.2.3 From 25e1ed6e64f52a692ba3191c4fde650aab3ecc07 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Tue, 21 Jun 2016 15:45:47 +0200 Subject: can: fix oops caused by wrong rtnl dellink usage For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2fd ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by: ajneu Signed-off-by: Oliver Hartkopp Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 348dd5001fa4..ad535a854e5c 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -1011,6 +1011,11 @@ static int can_newlink(struct net *src_net, struct net_device *dev, return -EOPNOTSUPP; } +static void can_dellink(struct net_device *dev, struct list_head *head) +{ + return; +} + static struct rtnl_link_ops can_link_ops __read_mostly = { .kind = "can", .maxtype = IFLA_CAN_MAX, @@ -1019,6 +1024,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = { .validate = can_validate, .newlink = can_newlink, .changelink = can_changelink, + .dellink = can_dellink, .get_size = can_get_size, .fill_info = can_fill_info, .get_xstats_size = can_get_xstats_size, -- cgit v1.2.3 From b41aa4f8476545e2b663b1549759a8c3a66f47b0 Mon Sep 17 00:00:00 2001 From: Cristina Ciocan Date: Wed, 22 Jun 2016 14:17:19 +0300 Subject: pinctrl: baytrail: Fix mingled clock pins Fix plt clock 3, 4 and 5 pins, which were not in the proper order. Signed-off-by: Cristina Ciocan Acked-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-baytrail.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c index 677a811b3a6f..7abfd42e8ffd 100644 --- a/drivers/pinctrl/intel/pinctrl-baytrail.c +++ b/drivers/pinctrl/intel/pinctrl-baytrail.c @@ -401,9 +401,9 @@ static const struct byt_simple_func_mux byt_score_sata_mux[] = { static const unsigned int byt_score_plt_clk0_pins[] = { 96 }; static const unsigned int byt_score_plt_clk1_pins[] = { 97 }; static const unsigned int byt_score_plt_clk2_pins[] = { 98 }; -static const unsigned int byt_score_plt_clk4_pins[] = { 99 }; -static const unsigned int byt_score_plt_clk5_pins[] = { 100 }; -static const unsigned int byt_score_plt_clk3_pins[] = { 101 }; +static const unsigned int byt_score_plt_clk3_pins[] = { 99 }; +static const unsigned int byt_score_plt_clk4_pins[] = { 100 }; +static const unsigned int byt_score_plt_clk5_pins[] = { 101 }; static const struct byt_simple_func_mux byt_score_plt_clk_mux[] = { SIMPLE_FUNC("plt_clk", 1), }; -- cgit v1.2.3 From 71873a9b38d1cc6c93e2962149a7bb7272a7cb66 Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Thu, 23 Jun 2016 07:57:21 +0200 Subject: can: kvaser_usb: Add support for more Kvaser Leaf v2 devices This patch adds support for Kvaser Leaf Light HS v2 OEM, Mini PCI Express 2xHS and USBcan Light 2xHS. Signed-off-by: Jimmy Assarsson Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/Kconfig | 2 ++ drivers/net/can/usb/kvaser_usb.c | 8 +++++++- 2 files changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index 2ff0df32b3d1..8483a40e7e9e 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -47,6 +47,8 @@ config CAN_KVASER_USB - Kvaser USBcan R - Kvaser Leaf Light v2 - Kvaser Mini PCI Express HS + - Kvaser Mini PCI Express 2xHS + - Kvaser USBcan Light 2xHS - Kvaser USBcan II HS/HS - Kvaser USBcan II HS/LS - Kvaser USBcan Rugged ("USBcan Rev B") diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c index 022bfa13ebfa..6f1f3b675ff5 100644 --- a/drivers/net/can/usb/kvaser_usb.c +++ b/drivers/net/can/usb/kvaser_usb.c @@ -59,11 +59,14 @@ #define USB_CAN_R_PRODUCT_ID 39 #define USB_LEAF_LITE_V2_PRODUCT_ID 288 #define USB_MINI_PCIE_HS_PRODUCT_ID 289 +#define USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID 290 +#define USB_USBCAN_LIGHT_2HS_PRODUCT_ID 291 +#define USB_MINI_PCIE_2HS_PRODUCT_ID 292 static inline bool kvaser_is_leaf(const struct usb_device_id *id) { return id->idProduct >= USB_LEAF_DEVEL_PRODUCT_ID && - id->idProduct <= USB_MINI_PCIE_HS_PRODUCT_ID; + id->idProduct <= USB_MINI_PCIE_2HS_PRODUCT_ID; } /* Kvaser USBCan-II devices */ @@ -537,6 +540,9 @@ static const struct usb_device_id kvaser_usb_table[] = { .driver_info = KVASER_HAS_TXRX_ERRORS }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID) }, { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID) }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID) }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_2HS_PRODUCT_ID) }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_2HS_PRODUCT_ID) }, /* USBCANII family IDs */ { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN2_PRODUCT_ID), -- cgit v1.2.3 From 842775f1509054ea969f1787f38d6a0ec2ccfaba Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Tue, 10 May 2016 10:27:54 +0100 Subject: xen/balloon: Fix declared-but-not-defined warning Fix a declared-but-not-defined warning when building with XEN_BALLOON_MEMORY_HOTPLUG=n. This fixes a regression introduced by commit dfd74a1edfab ("xen/balloon: Fix crash when ballooning on x86 32 bit PAE"). Signed-off-by: Ross Lagerwall Acked-by: Juergen Gross Signed-off-by: David Vrabel --- drivers/xen/balloon.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index d46839f51e73..e4db19e88ab1 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -151,8 +151,6 @@ static DECLARE_WAIT_QUEUE_HEAD(balloon_wq); static void balloon_process(struct work_struct *work); static DECLARE_DELAYED_WORK(balloon_worker, balloon_process); -static void release_memory_resource(struct resource *resource); - /* When ballooning out (allocating memory to return to Xen) we don't really want the kernel to try too hard since that can trigger the oom killer. */ #define GFP_BALLOON \ @@ -248,6 +246,19 @@ static enum bp_state update_schedule(enum bp_state state) } #ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG +static void release_memory_resource(struct resource *resource) +{ + if (!resource) + return; + + /* + * No need to reset region to identity mapped since we now + * know that no I/O can be in this region + */ + release_resource(resource); + kfree(resource); +} + static struct resource *additional_memory_resource(phys_addr_t size) { struct resource *res; @@ -286,19 +297,6 @@ static struct resource *additional_memory_resource(phys_addr_t size) return res; } -static void release_memory_resource(struct resource *resource) -{ - if (!resource) - return; - - /* - * No need to reset region to identity mapped since we now - * know that no I/O can be in this region - */ - release_resource(resource); - kfree(resource); -} - static enum bp_state reserve_additional_memory(void) { long credit; -- cgit v1.2.3 From 02ef871ecac290919ea0c783d05da7eedeffc10e Mon Sep 17 00:00:00 2001 From: Andrey Grodzovsky Date: Tue, 21 Jun 2016 14:26:36 -0400 Subject: xen/pciback: Fix conf_space read/write overlap check. Current overlap check is evaluating to false a case where a filter field is fully contained (proper subset) of a r/w request. This change applies classical overlap check instead to include all the scenarios. More specifically, for (Hilscher GmbH CIFX 50E-DP(M/S)) device driver the logic is such that the entire confspace is read and written in 4 byte chunks. In this case as an example, CACHE_LINE_SIZE, LATENCY_TIMER and PCI_BIST are arriving together in one call to xen_pcibk_config_write() with offset == 0xc and size == 4. With the exsisting overlap check the LATENCY_TIMER field (offset == 0xd, length == 1) is fully contained in the write request and hence is excluded from write, which is incorrect. Signed-off-by: Andrey Grodzovsky Reviewed-by: Boris Ostrovsky Reviewed-by: Jan Beulich Cc: Signed-off-by: David Vrabel --- drivers/xen/xen-pciback/conf_space.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/xen-pciback/conf_space.c b/drivers/xen/xen-pciback/conf_space.c index 8e67336f8ddd..6a25533da237 100644 --- a/drivers/xen/xen-pciback/conf_space.c +++ b/drivers/xen/xen-pciback/conf_space.c @@ -183,8 +183,7 @@ int xen_pcibk_config_read(struct pci_dev *dev, int offset, int size, field_start = OFFSET(cfg_entry); field_end = OFFSET(cfg_entry) + field->size; - if ((req_start >= field_start && req_start < field_end) - || (req_end > field_start && req_end <= field_end)) { + if (req_end > field_start && field_end > req_start) { err = conf_space_read(dev, cfg_entry, field_start, &tmp_val); if (err) @@ -230,8 +229,7 @@ int xen_pcibk_config_write(struct pci_dev *dev, int offset, int size, u32 value) field_start = OFFSET(cfg_entry); field_end = OFFSET(cfg_entry) + field->size; - if ((req_start >= field_start && req_start < field_end) - || (req_end > field_start && req_end <= field_end)) { + if (req_end > field_start && field_end > req_start) { tmp_val = 0; err = xen_pcibk_config_read(dev, field_start, -- cgit v1.2.3 From 5ce91714b0d8c0a3ff9b858966721f508351cf4c Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 18 Jun 2016 00:54:47 +0200 Subject: hwmon: (dell-smm) Cache fan_type() calls and change fan detection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On more Dell machines (e.g. Dell Precision M3800) fan_type() call is too expensive (CPU is too long in SMM mode) and cause kernel to hang. This is bug in Dell SMM or BIOS. This patch caches type for each fan (as it should not change) and changes the way how fan presense is detected. First it try function fan_status() as was before commit f989e55452c7 ("i8k: Add support for fan labels"). And if that fails fallback to fan_type(). *_status() functions can fail in case fan is not currently accessible (e.g. present on GPU which is currently turned off). Reported-by: Tolga Cakir Signed-off-by: Pali Rohár Link: https://bugzilla.kernel.org/show_bug.cgi?id=112021 Cc: stable@vger.kernel.org # v4.0+, will need backport Tested-by: Tolga Cakir Signed-off-by: Guenter Roeck --- drivers/hwmon/dell-smm-hwmon.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c index 4bbc58714868..2ac87d553e22 100644 --- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -238,7 +238,7 @@ static int i8k_get_fan_speed(int fan) /* * Read the fan type. */ -static int i8k_get_fan_type(int fan) +static int _i8k_get_fan_type(int fan) { struct smm_regs regs = { .eax = I8K_SMM_GET_FAN_TYPE, }; @@ -249,6 +249,17 @@ static int i8k_get_fan_type(int fan) return i8k_smm(®s) ? : regs.eax & 0xff; } +static int i8k_get_fan_type(int fan) +{ + /* I8K_SMM_GET_FAN_TYPE SMM call is expensive, so cache values */ + static int types[2] = { INT_MIN, INT_MIN }; + + if (types[fan] == INT_MIN) + types[fan] = _i8k_get_fan_type(fan); + + return types[fan]; +} + /* * Read the fan nominal rpm for specific fan speed. */ @@ -782,13 +793,17 @@ static int __init i8k_init_hwmon(void) if (err >= 0) i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP4; - /* First fan attributes, if fan type is OK */ - err = i8k_get_fan_type(0); + /* First fan attributes, if fan status or type is OK */ + err = i8k_get_fan_status(0); + if (err < 0) + err = i8k_get_fan_type(0); if (err >= 0) i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN1; - /* Second fan attributes, if fan type is OK */ - err = i8k_get_fan_type(1); + /* Second fan attributes, if fan status or type is OK */ + err = i8k_get_fan_status(1); + if (err < 0) + err = i8k_get_fan_type(1); if (err >= 0) i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN2; -- cgit v1.2.3 From f336ae03149725bb5844166c7b04f7f65f17eec9 Mon Sep 17 00:00:00 2001 From: Talat Batheesh Date: Wed, 22 Jun 2016 17:27:22 +0300 Subject: IB/core: Fix no default GIDs when netdevice reregisters Currently, when the netdevice returned by get_netdev is unregistered, we delete all GIDs (including the default GIDs) and reset their attributes. Therefore, when we re-register it, no default GIDs will be assigned (as their "default GID") attribute will be reset. Fixing this by keeping "default GID" attribute. Fixes: 03db3a2d81e6 ('IB/core: Add RoCE GID table management') Signed-off-by: Talat Batheesh Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/cache.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index 040966775f40..1a2984c28b95 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -411,7 +411,9 @@ int ib_cache_gid_del_all_netdev_gids(struct ib_device *ib_dev, u8 port, for (ix = 0; ix < table->sz; ix++) if (table->data_vec[ix].attr.ndev == ndev) - if (!del_gid(ib_dev, port, table, ix, false)) + if (!del_gid(ib_dev, port, table, ix, + !!(table->data_vec[ix].props & + GID_TABLE_ENTRY_DEFAULT))) deleted = true; write_unlock_irq(&table->rwlock); -- cgit v1.2.3 From c65f6c5a3650876a69d1041a9d3c90986e9ca233 Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Wed, 22 Jun 2016 17:27:23 +0300 Subject: IB/core: Fix RoCE v1 multicast join logic issue During multicast join of RoCEv1, IGMP join state and max hop limit were updated incorrectly. IGMP join should be sent and marked as joined only on RoCEv2 after a successful join. Max hops should be updated to the hop limit on RoCEv2 regardless of the join state. Fixes: bee3c3c91865 ('IB/cma: Join and leave multicast groups...') Signed-off-by: Alex Vesker Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/cma.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index f0c91ba3178a..dcde8706f123 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -3878,12 +3878,12 @@ static int cma_iboe_join_multicast(struct rdma_id_private *id_priv, gid_type = id_priv->cma_dev->default_gid_type[id_priv->id.port_num - rdma_start_port(id_priv->cma_dev->device)]; if (addr->sa_family == AF_INET) { - if (gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) + if (gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) { + mc->multicast.ib->rec.hop_limit = IPV6_DEFAULT_HOPLIMIT; err = cma_igmp_send(ndev, &mc->multicast.ib->rec.mgid, true); - if (!err) { - mc->igmp_joined = true; - mc->multicast.ib->rec.hop_limit = IPV6_DEFAULT_HOPLIMIT; + if (!err) + mc->igmp_joined = true; } } else { if (gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) -- cgit v1.2.3 From b3556005c5f319285610e3eae88b4078e1a4d3bc Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 22 Jun 2016 17:27:24 +0300 Subject: IB/core: Fix false search of the IB_SA_WELL_KNOWN_GUID When virtualziation is supported, VFs may send SA MADs to a GID formed by the concatenation of the subnet prefix with the IB_SA_WELL_KNOWN_GUID. When a response is required, the current code will search the local HCA's port for the received GID to figure out the GID index of the entry containing this GID. However, since this is not a real GID it will not be found and error will be printed. We change the logic to check if the destination GID is this special GID and avoid lookup in this case and use GID index 0. Fixes: a0c1b2a35087 ('IB/core: Support accessing SA in virtualized environment') Signed-off-by: Eli Cohen Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/verbs.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 1d7d4cf442e3..6298f54b4137 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -511,12 +511,16 @@ int ib_init_ah_from_wc(struct ib_device *device, u8 port_num, ah_attr->grh.dgid = sgid; if (!rdma_cap_eth_ah(device, port_num)) { - ret = ib_find_cached_gid_by_port(device, &dgid, - IB_GID_TYPE_IB, - port_num, NULL, - &gid_index); - if (ret) - return ret; + if (dgid.global.interface_id != cpu_to_be64(IB_SA_WELL_KNOWN_GUID)) { + ret = ib_find_cached_gid_by_port(device, &dgid, + IB_GID_TYPE_IB, + port_num, NULL, + &gid_index); + if (ret) + return ret; + } else { + gid_index = 0; + } } ah_attr->grh.sgid_index = (u8) gid_index; -- cgit v1.2.3 From b57141c1abe41e26c09b1b1b7ece463464ba6de2 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Wed, 22 Jun 2016 17:27:25 +0300 Subject: IB/uverbs: Initialize ib_qp_init_attr with zeros Initialize ib_qp_init_attr with zeros in order to avoid from garbage in fields that won't be set with user values. Fixes: a060b5629ab06 ('IB/core: generic RDMA READ/WRITE API') Signed-off-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/uverbs_cmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 1a8babb8ee3c..825021d1008b 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -1747,7 +1747,7 @@ static int create_qp(struct ib_uverbs_file *file, struct ib_srq *srq = NULL; struct ib_qp *qp; char *buf; - struct ib_qp_init_attr attr; + struct ib_qp_init_attr attr = {}; struct ib_uverbs_ex_create_qp_resp resp; int ret; -- cgit v1.2.3 From c9b254955b9f8814966f5dabd34c39d0e0a2b437 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 22 Jun 2016 17:27:26 +0300 Subject: IB/mlx5: Fix post send fence logic If the caller specified IB_SEND_FENCE in the send flags of the work request and no previous work request stated that the successive one should be fenced, the work request would be executed without a fence. This could result in RDMA read or atomic operations failure due to a MR being invalidated. Fix this by adding the mlx5 enumeration for fencing RDMA/atomic operations and fix the logic to apply this. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/qp.c | 7 ++++--- include/linux/mlx5/qp.h | 1 + 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index ce434228a5ea..ce0a7ab35a22 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -3332,10 +3332,11 @@ static u8 get_fence(u8 fence, struct ib_send_wr *wr) return MLX5_FENCE_MODE_SMALL_AND_FENCE; else return fence; - - } else { - return 0; + } else if (unlikely(wr->send_flags & IB_SEND_FENCE)) { + return MLX5_FENCE_MODE_FENCE; } + + return 0; } static int begin_wqe(struct mlx5_ib_qp *qp, void **seg, diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h index e4e29882fdfd..630f66a186b7 100644 --- a/include/linux/mlx5/qp.h +++ b/include/linux/mlx5/qp.h @@ -172,6 +172,7 @@ enum { enum { MLX5_FENCE_MODE_NONE = 0 << 5, MLX5_FENCE_MODE_INITIATOR_SMALL = 1 << 5, + MLX5_FENCE_MODE_FENCE = 2 << 5, MLX5_FENCE_MODE_STRONG_ORDERING = 3 << 5, MLX5_FENCE_MODE_SMALL_AND_FENCE = 4 << 5, }; -- cgit v1.2.3 From 00bf534fce23048aa0e6fd8dbceedf097ee65508 Mon Sep 17 00:00:00 2001 From: Talat Batheesh Date: Wed, 22 Jun 2016 17:27:27 +0300 Subject: IB/mlx5: Fix wrong naming of port_rcv_data counter port_xmit_data is written instead of port_rcv_data. Fixes: 3efd9a11212d ('IB/mlx5: Modify MAD reading counters method to use counter registers') Signed-off-by: Talat Batheesh Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/mad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/mad.c b/drivers/infiniband/hw/mlx5/mad.c index 1534af113058..364aab9f3c9e 100644 --- a/drivers/infiniband/hw/mlx5/mad.c +++ b/drivers/infiniband/hw/mlx5/mad.c @@ -121,7 +121,7 @@ static void pma_cnt_ext_assign(struct ib_pma_portcounters_ext *pma_cnt_ext, pma_cnt_ext->port_xmit_data = cpu_to_be64(MLX5_SUM_CNT(out, transmitted_ib_unicast.octets, transmitted_ib_multicast.octets) >> 2); - pma_cnt_ext->port_xmit_data = + pma_cnt_ext->port_rcv_data = cpu_to_be64(MLX5_SUM_CNT(out, received_ib_unicast.octets, received_ib_multicast.octets) >> 2); pma_cnt_ext->port_xmit_packets = -- cgit v1.2.3 From f2940e2c76bb554a7fbdd28ca5b90904117a9e96 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Wed, 22 Jun 2016 17:27:28 +0300 Subject: IB/mlx4: Fix the SQ size of an RC QP When calculating the required size of an RC QP send queue, leave enough space for masked atomic operations, which require more space than "regular" atomic operation. Fixes: 6fa8f719844b ("IB/mlx4: Add support for masked atomic operations") Signed-off-by: Yishai Hadas Reviewed-by: Jack Morgenstein Reviewed-by: Eran Ben Elisha Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 81b0e1fbec1d..519611793f7c 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -362,7 +362,7 @@ static int send_wqe_overhead(enum mlx4_ib_qp_type type, u32 flags) sizeof (struct mlx4_wqe_raddr_seg); case MLX4_IB_QPT_RC: return sizeof (struct mlx4_wqe_ctrl_seg) + - sizeof (struct mlx4_wqe_atomic_seg) + + sizeof (struct mlx4_wqe_masked_atomic_seg) + sizeof (struct mlx4_wqe_raddr_seg); case MLX4_IB_QPT_SMI: case MLX4_IB_QPT_GSI: -- cgit v1.2.3 From a6100603a4a87fc436199362bdb81cb849faaf6e Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Wed, 22 Jun 2016 17:27:29 +0300 Subject: IB/mlx4: Fix error flow when sending mads under SRIOV Fix mad send error flow to prevent double freeing address handles, and leaking tx_ring entries when SRIOV is active. If ib_mad_post_send fails, the address handle pointer in the tx_ring entry must be set to NULL (or there will be a double-free) and tx_tail must be incremented (or there will be a leak of tx_ring entries). The tx_ring is handled the same way in the send-completion handler. Fixes: 37bfc7c1e83f ("IB/mlx4: SR-IOV multiplex and demultiplex MADs") Signed-off-by: Yishai Hadas Reviewed-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/mad.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c index d68f506c1922..9c2e53d28f98 100644 --- a/drivers/infiniband/hw/mlx4/mad.c +++ b/drivers/infiniband/hw/mlx4/mad.c @@ -527,7 +527,7 @@ int mlx4_ib_send_to_slave(struct mlx4_ib_dev *dev, int slave, u8 port, tun_tx_ix = (++tun_qp->tx_ix_head) & (MLX4_NUM_TUNNEL_BUFS - 1); spin_unlock(&tun_qp->tx_lock); if (ret) - goto out; + goto end; tun_mad = (struct mlx4_rcv_tunnel_mad *) (tun_qp->tx_ring[tun_tx_ix].buf.addr); if (tun_qp->tx_ring[tun_tx_ix].ah) @@ -596,9 +596,15 @@ int mlx4_ib_send_to_slave(struct mlx4_ib_dev *dev, int slave, u8 port, wr.wr.send_flags = IB_SEND_SIGNALED; ret = ib_post_send(src_qp, &wr.wr, &bad_wr); -out: - if (ret) - ib_destroy_ah(ah); + if (!ret) + return 0; + out: + spin_lock(&tun_qp->tx_lock); + tun_qp->tx_ix_tail++; + spin_unlock(&tun_qp->tx_lock); + tun_qp->tx_ring[tun_tx_ix].ah = NULL; +end: + ib_destroy_ah(ah); return ret; } @@ -1326,9 +1332,15 @@ int mlx4_ib_send_to_wire(struct mlx4_ib_dev *dev, int slave, u8 port, ret = ib_post_send(send_qp, &wr.wr, &bad_wr); + if (!ret) + return 0; + + spin_lock(&sqp->tx_lock); + sqp->tx_ix_tail++; + spin_unlock(&sqp->tx_lock); + sqp->tx_ring[wire_tx_ix].ah = NULL; out: - if (ret) - ib_destroy_ah(ah); + ib_destroy_ah(ah); return ret; } -- cgit v1.2.3 From 5533c18ab02b17a7f2ac11908e2d97d4b421617d Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Wed, 22 Jun 2016 17:27:30 +0300 Subject: IB/mlx4: Verify port number in flow steering create flow In procedure mlx4_ib_create_flow, passing an invalid port number will cause an out-of-bounds array access. Data passed to this procedure can come from user-space. Therefore, need to validate port number before proceeding onwards. Note that we check against the number of physical ports declared at the verbs (ib core) level; When bonding is active, the verbs level sees one physical port, even though the low-level driver sees two ports. Fixes: f77c0162a339 ("IB/mlx4: Add receive flow steering support") Signed-off-by: Yishai Hadas Reviewed-by: Jack Morgenstein Reviewed-by: Moni Shoua Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 0eb09e104542..42a46078d7d5 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -1704,6 +1704,9 @@ static struct ib_flow *mlx4_ib_create_flow(struct ib_qp *qp, struct mlx4_dev *dev = (to_mdev(qp->device))->dev; int is_bonded = mlx4_is_bonded(dev); + if (flow_attr->port < 1 || flow_attr->port > qp->device->phys_port_cnt) + return ERR_PTR(-EINVAL); + if ((flow_attr->flags & IB_FLOW_ATTR_FLAGS_DONT_TRAP) && (flow_attr->type != IB_FLOW_ATTR_NORMAL)) return ERR_PTR(-EOPNOTSUPP); -- cgit v1.2.3 From 5b420d9cf7382c6e1512e96e02d18842d272049c Mon Sep 17 00:00:00 2001 From: Dotan Barak Date: Wed, 22 Jun 2016 17:27:31 +0300 Subject: IB/mlx4: Fix memory leak if QP creation failed When RC, UC, or RAW QPs are created, a qp object is allocated (kzalloc). If at a later point (in procedure create_qp_common) the qp creation fails, this qp object must be freed. Fixes: 1ffeb2eb8be99 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by: Dotan Barak Signed-off-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/qp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 519611793f7c..8db8405c1e99 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1191,8 +1191,10 @@ static struct ib_qp *_mlx4_ib_create_qp(struct ib_pd *pd, { err = create_qp_common(to_mdev(pd->device), pd, init_attr, udata, 0, &qp, gfp); - if (err) + if (err) { + kfree(qp); return ERR_PTR(err); + } qp->ibqp.qp_num = qp->mqp.qpn; qp->xrcdn = xrcdn; -- cgit v1.2.3 From cbc9355a939b90263c58beb855f8151b56634c42 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Wed, 22 Jun 2016 17:27:32 +0300 Subject: IB/mlx4: Prevent cross page boundary allocation Prevent cross page boundary allocation by allocating new page, this is required to be aligned with ConnectX-3 HW requirements. Not doing that might cause to "RDMA read local protection" error. Fixes: 1b2cd0fc673c ('IB/mlx4: Support the new memory registration API') Suggested-by: Christoph Hellwig Signed-off-by: Chuck Lever Reviewed-by: Sagi Grimberg Signed-off-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/mlx4_ib.h | 2 +- drivers/infiniband/hw/mlx4/mr.c | 34 +++++++++++++++++----------------- 2 files changed, 18 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h index 6c5ac5d8f32f..29acda249612 100644 --- a/drivers/infiniband/hw/mlx4/mlx4_ib.h +++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h @@ -139,7 +139,7 @@ struct mlx4_ib_mr { u32 max_pages; struct mlx4_mr mmr; struct ib_umem *umem; - void *pages_alloc; + size_t page_map_size; }; struct mlx4_ib_mw { diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c index 631272172a0b..5d73989d9771 100644 --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -277,20 +277,23 @@ mlx4_alloc_priv_pages(struct ib_device *device, struct mlx4_ib_mr *mr, int max_pages) { - int size = max_pages * sizeof(u64); - int add_size; int ret; - add_size = max_t(int, MLX4_MR_PAGES_ALIGN - ARCH_KMALLOC_MINALIGN, 0); + /* Ensure that size is aligned to DMA cacheline + * requirements. + * max_pages is limited to MLX4_MAX_FAST_REG_PAGES + * so page_map_size will never cross PAGE_SIZE. + */ + mr->page_map_size = roundup(max_pages * sizeof(u64), + MLX4_MR_PAGES_ALIGN); - mr->pages_alloc = kzalloc(size + add_size, GFP_KERNEL); - if (!mr->pages_alloc) + /* Prevent cross page boundary allocation. */ + mr->pages = (__be64 *)get_zeroed_page(GFP_KERNEL); + if (!mr->pages) return -ENOMEM; - mr->pages = PTR_ALIGN(mr->pages_alloc, MLX4_MR_PAGES_ALIGN); - mr->page_map = dma_map_single(device->dma_device, mr->pages, - size, DMA_TO_DEVICE); + mr->page_map_size, DMA_TO_DEVICE); if (dma_mapping_error(device->dma_device, mr->page_map)) { ret = -ENOMEM; @@ -298,9 +301,9 @@ mlx4_alloc_priv_pages(struct ib_device *device, } return 0; -err: - kfree(mr->pages_alloc); +err: + free_page((unsigned long)mr->pages); return ret; } @@ -309,11 +312,10 @@ mlx4_free_priv_pages(struct mlx4_ib_mr *mr) { if (mr->pages) { struct ib_device *device = mr->ibmr.device; - int size = mr->max_pages * sizeof(u64); dma_unmap_single(device->dma_device, mr->page_map, - size, DMA_TO_DEVICE); - kfree(mr->pages_alloc); + mr->page_map_size, DMA_TO_DEVICE); + free_page((unsigned long)mr->pages); mr->pages = NULL; } } @@ -537,14 +539,12 @@ int mlx4_ib_map_mr_sg(struct ib_mr *ibmr, struct scatterlist *sg, int sg_nents, mr->npages = 0; ib_dma_sync_single_for_cpu(ibmr->device, mr->page_map, - sizeof(u64) * mr->max_pages, - DMA_TO_DEVICE); + mr->page_map_size, DMA_TO_DEVICE); rc = ib_sg_to_pages(ibmr, sg, sg_nents, sg_offset, mlx4_set_page); ib_dma_sync_single_for_device(ibmr->device, mr->page_map, - sizeof(u64) * mr->max_pages, - DMA_TO_DEVICE); + mr->page_map_size, DMA_TO_DEVICE); return rc; } -- cgit v1.2.3 From 2aee309d3e01447c55fdf89cef05a0e2be372655 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Fri, 17 Jun 2016 19:17:49 -0700 Subject: IB/hfi1: Fix deadlock with txreq allocation slow path A failure in the get_txreq() inline will result in a slow path retry using __get_txreq(). __get_txreq() attempts to procure the qp s_lock, which is already held in all callers. Fix by deleting the s_lock maintenance in __get_txreq() and add sparse syntax hooks to future proof the code. Cc: Stable # 4.6+ Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/verbs_txreq.c | 4 +--- drivers/infiniband/hw/hfi1/verbs_txreq.h | 1 + 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/verbs_txreq.c b/drivers/infiniband/hw/hfi1/verbs_txreq.c index bc95c4112c61..d8fb056526f8 100644 --- a/drivers/infiniband/hw/hfi1/verbs_txreq.c +++ b/drivers/infiniband/hw/hfi1/verbs_txreq.c @@ -92,11 +92,10 @@ void hfi1_put_txreq(struct verbs_txreq *tx) struct verbs_txreq *__get_txreq(struct hfi1_ibdev *dev, struct rvt_qp *qp) + __must_hold(&qp->s_lock) { struct verbs_txreq *tx = ERR_PTR(-EBUSY); - unsigned long flags; - spin_lock_irqsave(&qp->s_lock, flags); write_seqlock(&dev->iowait_lock); if (ib_rvt_state_ops[qp->state] & RVT_PROCESS_RECV_OK) { struct hfi1_qp_priv *priv; @@ -116,7 +115,6 @@ struct verbs_txreq *__get_txreq(struct hfi1_ibdev *dev, } out: write_sequnlock(&dev->iowait_lock); - spin_unlock_irqrestore(&qp->s_lock, flags); return tx; } diff --git a/drivers/infiniband/hw/hfi1/verbs_txreq.h b/drivers/infiniband/hw/hfi1/verbs_txreq.h index 1cf69b2fe4a5..a1d6e0807f97 100644 --- a/drivers/infiniband/hw/hfi1/verbs_txreq.h +++ b/drivers/infiniband/hw/hfi1/verbs_txreq.h @@ -73,6 +73,7 @@ struct verbs_txreq *__get_txreq(struct hfi1_ibdev *dev, static inline struct verbs_txreq *get_txreq(struct hfi1_ibdev *dev, struct rvt_qp *qp) + __must_hold(&qp->slock) { struct verbs_txreq *tx; struct hfi1_qp_priv *priv = qp->priv; -- cgit v1.2.3 From 8ae84f7c56044ee17ef6b700cb34d11ad9428a2e Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Fri, 17 Jun 2016 19:17:54 -0700 Subject: IB/hfi1: Don't zero out qp->s_ack_queue in rvt_reset_qp Since rvt_reset_qp already zero's out qp->s_ack_queue head and tail pointers, there is no need to zero out qp->s_ack_queue itself. Reviewed-by: Dennis Dalessandro Reviewed-by: Mike Marciniszyn Signed-off-by: Ashutosh Dixit Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rdmavt/qp.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c index c3e0d614f68b..d04f4fe522b5 100644 --- a/drivers/infiniband/sw/rdmavt/qp.c +++ b/drivers/infiniband/sw/rdmavt/qp.c @@ -576,12 +576,6 @@ static void rvt_reset_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp, qp->s_ssn = 1; qp->s_lsn = 0; qp->s_mig_state = IB_MIG_MIGRATED; - if (qp->s_ack_queue) - memset( - qp->s_ack_queue, - 0, - rvt_max_atomic(rdi) * - sizeof(*qp->s_ack_queue)); qp->r_head_ack_queue = 0; qp->s_tail_ack_queue = 0; qp->s_num_rd_atomic = 0; -- cgit v1.2.3 From c755f4afa66ad3ed98870bd3254f37c47fb2c800 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Wed, 22 Jun 2016 13:29:33 -0700 Subject: IB/rdmavt: Correct qp_priv_alloc() return value test The current drivers return errors from this calldown wrapped in an ERR_PTR(). The rdmavt code incorrectly tests for NULL. The code is fixed to use IS_ERR() and change ret according to the driver return value. Cc: Stable # 4.6+ Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rdmavt/qp.c | 4 +++- include/rdma/rdma_vt.h | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c index d04f4fe522b5..41ba7e9cadaa 100644 --- a/drivers/infiniband/sw/rdmavt/qp.c +++ b/drivers/infiniband/sw/rdmavt/qp.c @@ -699,8 +699,10 @@ struct ib_qp *rvt_create_qp(struct ib_pd *ibpd, * initialization that is needed. */ priv = rdi->driver_f.qp_priv_alloc(rdi, qp, gfp); - if (!priv) + if (IS_ERR(priv)) { + ret = priv; goto bail_qp; + } qp->priv = priv; qp->timeout_jiffies = usecs_to_jiffies((4096UL * (1UL << qp->timeout)) / diff --git a/include/rdma/rdma_vt.h b/include/rdma/rdma_vt.h index 16274e2133cd..9c9a27d42aaa 100644 --- a/include/rdma/rdma_vt.h +++ b/include/rdma/rdma_vt.h @@ -203,7 +203,9 @@ struct rvt_driver_provided { /* * Allocate a private queue pair data structure for driver specific - * information which is opaque to rdmavt. + * information which is opaque to rdmavt. Errors are returned via + * ERR_PTR(err). The driver is free to return NULL or a valid + * pointer. */ void * (*qp_priv_alloc)(struct rvt_dev_info *rdi, struct rvt_qp *qp, gfp_t gfp); -- cgit v1.2.3 From 747f1c6d9be749a29612fc78c321b97099906008 Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Tue, 14 Jun 2016 16:54:16 -0500 Subject: i40iw: Correct CQ arming CQ is armed for solicited events only, ignoring other notification flags. Correct this by arming for next and arming for solicited event if IB_CQ_SOLICITED is set. Also protect CQ shadow area update with spinlock. Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_verbs.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c index 02a735b64208..c6e75acbbbcd 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c +++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c @@ -2327,13 +2327,16 @@ static int i40iw_req_notify_cq(struct ib_cq *ibcq, { struct i40iw_cq *iwcq; struct i40iw_cq_uk *ukcq; - enum i40iw_completion_notify cq_notify = IW_CQ_COMPL_SOLICITED; + unsigned long flags; + enum i40iw_completion_notify cq_notify = IW_CQ_COMPL_EVENT; iwcq = (struct i40iw_cq *)ibcq; ukcq = &iwcq->sc_cq.cq_uk; - if (notify_flags == IB_CQ_NEXT_COMP) - cq_notify = IW_CQ_COMPL_EVENT; + if (notify_flags == IB_CQ_SOLICITED) + cq_notify = IW_CQ_COMPL_SOLICITED; + spin_lock_irqsave(&iwcq->lock, flags); ukcq->ops.iw_cq_request_notification(ukcq, cq_notify); + spin_unlock_irqrestore(&iwcq->lock, flags); return 0; } -- cgit v1.2.3 From ee23abd75c5076e51061c275e8f659d754a63c9d Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Tue, 14 Jun 2016 16:54:17 -0500 Subject: i40iw: Correct status check on i40iw_get_pble i40iw_get_pble returns 0 on success. Correct the check on return code. Signed-off-by: Faisal Latif Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c index c6e75acbbbcd..65bea9c8df13 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c +++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c @@ -1527,7 +1527,7 @@ static struct ib_mr *i40iw_alloc_mr(struct ib_pd *pd, mutex_lock(&iwdev->pbl_mutex); status = i40iw_get_pble(&iwdev->sc_dev, iwdev->pble_rsrc, palloc, iwmr->page_cnt); mutex_unlock(&iwdev->pbl_mutex); - if (!status) + if (status) goto err1; if (palloc->level != I40IW_LEVEL_1) -- cgit v1.2.3 From 0477e18145c565f9ca74c6df4112f818f673fcaa Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Tue, 14 Jun 2016 16:54:18 -0500 Subject: i40iw: Return correct max_fast_reg_page_list_len Return correct value for max_fast_reg_page_list_len from i40iw_query_device(). Signed-off-by: Faisal Latif Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw.h | 1 + drivers/infiniband/hw/i40iw/i40iw_verbs.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw.h b/drivers/infiniband/hw/i40iw/i40iw.h index 8b9532034558..14f16a2dcbed 100644 --- a/drivers/infiniband/hw/i40iw/i40iw.h +++ b/drivers/infiniband/hw/i40iw/i40iw.h @@ -113,6 +113,7 @@ #define IW_HMC_OBJ_TYPE_NUM ARRAY_SIZE(iw_hmc_obj_types) #define IW_CFG_FPM_QP_COUNT 32768 +#define I40IW_MAX_PAGES_PER_FMR 512 #define I40IW_MTU_TO_MSS 40 #define I40IW_DEFAULT_MSS 1460 diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c index 65bea9c8df13..31eda323fcbf 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c +++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c @@ -79,6 +79,7 @@ static int i40iw_query_device(struct ib_device *ibdev, props->max_qp_init_rd_atom = props->max_qp_rd_atom; props->atomic_cap = IB_ATOMIC_NONE; props->max_map_per_fmr = 1; + props->max_fast_reg_page_list_len = I40IW_MAX_PAGES_PER_FMR; return 0; } -- cgit v1.2.3 From 7748e4990de42ea796543c0ffd34118c3a5e6a98 Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Tue, 14 Jun 2016 16:54:19 -0500 Subject: i40iw: Enable level-1 PBL for fast memory registration Set the chunk_size to enable level-1 PBL support when the fast memory page count is more than one. Signed-off-by: Shiraz Saleem Signed-off-by: Faisal Latif Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw.h | 1 + drivers/infiniband/hw/i40iw/i40iw_verbs.c | 5 +++++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw.h b/drivers/infiniband/hw/i40iw/i40iw.h index 14f16a2dcbed..b738acdb9b02 100644 --- a/drivers/infiniband/hw/i40iw/i40iw.h +++ b/drivers/infiniband/hw/i40iw/i40iw.h @@ -114,6 +114,7 @@ #define IW_HMC_OBJ_TYPE_NUM ARRAY_SIZE(iw_hmc_obj_types) #define IW_CFG_FPM_QP_COUNT 32768 #define I40IW_MAX_PAGES_PER_FMR 512 +#define I40IW_MIN_PAGES_PER_FMR 1 #define I40IW_MTU_TO_MSS 40 #define I40IW_DEFAULT_MSS 1460 diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c index 31eda323fcbf..33959ed14563 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c +++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c @@ -2150,6 +2150,7 @@ static int i40iw_post_send(struct ib_qp *ibqp, struct i40iw_sc_dev *dev = &iwqp->iwdev->sc_dev; struct i40iw_fast_reg_stag_info info; + memset(&info, 0, sizeof(info)); info.access_rights = I40IW_ACCESS_FLAGS_LOCALREAD; info.access_rights |= i40iw_get_user_access(flags); info.stag_key = reg_wr(ib_wr)->key & 0xff; @@ -2159,10 +2160,14 @@ static int i40iw_post_send(struct ib_qp *ibqp, info.addr_type = I40IW_ADDR_TYPE_VA_BASED; info.va = (void *)(uintptr_t)iwmr->ibmr.iova; info.total_len = iwmr->ibmr.length; + info.reg_addr_pa = *(u64 *)palloc->level1.addr; info.first_pm_pbl_index = palloc->level1.idx; info.local_fence = ib_wr->send_flags & IB_SEND_FENCE; info.signaled = ib_wr->send_flags & IB_SEND_SIGNALED; + if (iwmr->npages > I40IW_MIN_PAGES_PER_FMR) + info.chunk_size = 1; + if (page_shift == 21) info.page_size = 1; /* 2M page */ -- cgit v1.2.3 From c0cf4512a31eb3cec70b066bc36ed55f7d05b8c0 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Thu, 23 Jun 2016 09:35:48 +0200 Subject: IB/srpt: Reduce QP buffer size The memory needed for the send and receive queues associated with a QP is proportional to the max_sge parameter. The current value of that parameter is such that with an mlx4 HCA the QP buffer size is 8 MB. Since DMA is used for communication between HCA and CPU that buffer either has to be allocated coherently or map_single() must succeed for that buffer. Since large contiguous allocations are fragile and since the maximum segment size for e.g. swiotlb is 256 KB, reduce the max_sge parameter. This patch avoids that the following text appears on the console after SRP logout and relogin on a system equipped with multiple IB HCAs: mlx4_core 0000:05:00.0: swiotlb buffer is full (sz: 8388608 bytes) swiotlb: coherent allocation failed for device 0000:05:00.0 size=8388608 CPU: 11 PID: 148 Comm: kworker/11:1 Not tainted 4.7.0-rc4-dbg+ #1 Call Trace: [] dump_stack+0x67/0x92 [] swiotlb_alloc_coherent+0x141/0x150 [] x86_swiotlb_alloc_coherent+0x3e/0x50 [] mlx4_buf_direct_alloc.isra.5+0x9a/0x120 [mlx4_core] [] mlx4_buf_alloc+0x165/0x1a0 [mlx4_core] [] create_qp_common.isra.29+0x57d/0xff0 [mlx4_ib] [] mlx4_ib_create_qp+0x12a/0x3f0 [mlx4_ib] [] ib_create_qp+0x3a/0x250 [ib_core] [] srpt_cm_handler+0x4bb/0xcad [ib_srpt] [] cm_process_work+0x20/0xf0 [ib_cm] [] cm_work_handler+0x1ac0/0x2059 [ib_cm] [] process_one_work+0x19d/0x490 [] worker_thread+0x49/0x490 [] kthread+0xea/0x100 [] ret_from_fork+0x1f/0x40 Fixes: b99f8e4d7bcd ("IB/srpt: convert to the generic RDMA READ/WRITE API") Signed-off-by: Bart Van Assche Cc: Laurence Oberman Cc: Christoph Hellwig Cc: Sagi Grimberg Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/srpt/ib_srpt.c | 3 +-- drivers/infiniband/ulp/srpt/ib_srpt.h | 1 + 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index e68b20cba70b..4a4155640d51 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -1638,8 +1638,7 @@ retry: */ qp_init->cap.max_send_wr = srp_sq_size / 2; qp_init->cap.max_rdma_ctxs = srp_sq_size / 2; - qp_init->cap.max_send_sge = max(sdev->device->attrs.max_sge_rd, - sdev->device->attrs.max_sge); + qp_init->cap.max_send_sge = SRPT_DEF_SG_PER_WQE; qp_init->port_num = ch->sport->port; ch->qp = ib_create_qp(sdev->pd, qp_init); diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.h b/drivers/infiniband/ulp/srpt/ib_srpt.h index fee6bfd7ca21..389030487da7 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.h +++ b/drivers/infiniband/ulp/srpt/ib_srpt.h @@ -106,6 +106,7 @@ enum { SRP_LOGIN_RSP_MULTICHAN_MAINTAINED = 0x2, SRPT_DEF_SG_TABLESIZE = 128, + SRPT_DEF_SG_PER_WQE = 16, MIN_SRPT_SQ_SIZE = 16, DEF_SRPT_SQ_SIZE = 4096, -- cgit v1.2.3 From c7f1429389ec1aa25e042bb13451385fbb596f8c Mon Sep 17 00:00:00 2001 From: Cameron Gutman Date: Thu, 23 Jun 2016 10:24:42 -0700 Subject: Input: xpad - fix oops when attaching an unknown Xbox One gamepad Xbox One controllers have multiple interfaces which all have the same class, subclass, and protocol. One of the these interfaces has only a single endpoint. When Xpad attempts to bind to this interface, it causes an oops when trying initialize the output URB by trying to access the second endpoint's descriptor. This situation was avoided for known Xbox One devices by checking the XTYPE constant associated with the VID and PID tuple. However, this breaks when new or previously unknown Xbox One controllers are attached to the system. This change addresses the problem by deriving the XTYPE for Xbox One controllers based on the interface protocol before checking the interface number. Fixes: 1a48ff81b391 ("Input: xpad - add support for Xbox One controllers") Signed-off-by: Cameron Gutman Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 923c57236c51..3438e98c145a 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -1437,16 +1437,6 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id break; } - if (xpad_device[i].xtype == XTYPE_XBOXONE && - intf->cur_altsetting->desc.bInterfaceNumber != 0) { - /* - * The Xbox One controller lists three interfaces all with the - * same interface class, subclass and protocol. Differentiate by - * interface number. - */ - return -ENODEV; - } - xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL); if (!xpad) return -ENOMEM; @@ -1478,6 +1468,8 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) { if (intf->cur_altsetting->desc.bInterfaceProtocol == 129) xpad->xtype = XTYPE_XBOX360W; + else if (intf->cur_altsetting->desc.bInterfaceProtocol == 208) + xpad->xtype = XTYPE_XBOXONE; else xpad->xtype = XTYPE_XBOX360; } else { @@ -1492,6 +1484,17 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id xpad->mapping |= MAP_STICKS_TO_NULL; } + if (xpad->xtype == XTYPE_XBOXONE && + intf->cur_altsetting->desc.bInterfaceNumber != 0) { + /* + * The Xbox One controller lists three interfaces all with the + * same interface class, subclass and protocol. Differentiate by + * interface number. + */ + error = -ENODEV; + goto err_free_in_urb; + } + error = xpad_init_output(intf, xpad); if (error) goto err_free_in_urb; -- cgit v1.2.3 From 02bae045f3b3bc5681f075be0a8b1313147d1df2 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 23 Jun 2016 10:58:26 +0800 Subject: drm/amd/powerplay: add some definition for FFC feature on polaris. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h | 2 ++ drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h | 3 ++- 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h b/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h index d41d37ab5b7c..b8f4b73c322e 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h +++ b/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h @@ -392,6 +392,8 @@ typedef uint16_t PPSMC_Result; #define PPSMC_MSG_SetGpuPllDfsForSclk ((uint16_t) 0x300) #define PPSMC_MSG_Didt_Block_Function ((uint16_t) 0x301) +#define PPSMC_MSG_SetVBITimeout ((uint16_t) 0x306) + #define PPSMC_MSG_SecureSRBMWrite ((uint16_t) 0x600) #define PPSMC_MSG_SecureSRBMRead ((uint16_t) 0x601) #define PPSMC_MSG_SetAddress ((uint16_t) 0x800) diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h b/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h index b85ff5400e57..899d6d8108c2 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h +++ b/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h @@ -270,7 +270,8 @@ struct SMU74_Discrete_DpmTable { uint8_t BootPhases; uint8_t VRHotLevel; - uint8_t Reserved1[3]; + uint8_t LdoRefSel; + uint8_t Reserved1[2]; uint16_t FanStartTemperature; uint16_t FanStopTemperature; uint16_t MaxVoltage; -- cgit v1.2.3 From 83a7af6dcfd2d84066c6d19bf2bd837f7be4a5ca Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 23 Jun 2016 11:05:00 +0800 Subject: drm/amd/powerplay: disable FFC. SMC need use VBI signal for MCLK switching Send 2 x frame time as vbi timeout Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 26 +++++++++++++++++----- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h | 1 + drivers/gpu/drm/amd/powerplay/inc/hwmgr.h | 2 ++ 3 files changed, 24 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 64ee78f7d41e..20ccbc73a8f7 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -1805,6 +1805,7 @@ static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr) data->smc_state_table.Sclk_voltageOffset[i] = volt_offset; } + data->smc_state_table.LdoRefSel = (table_info->cac_dtp_table->ucCKS_LDO_REFSEL != 0) ? table_info->cac_dtp_table->ucCKS_LDO_REFSEL : 6; /* Populate CKS Lookup Table */ if (stretch_amount == 1 || stretch_amount == 2 || stretch_amount == 5) stretch_amount2 = 0; @@ -2487,6 +2488,8 @@ int polaris10_enable_dpm_tasks(struct pp_hwmgr *hwmgr) PP_ASSERT_WITH_CODE((0 == tmp_result), "Failed to enable VR hot GPIO interrupt!", result = tmp_result); + smum_send_msg_to_smc(hwmgr->smumgr, (PPSMC_Msg)PPSMC_HasDisplay); + tmp_result = polaris10_enable_sclk_control(hwmgr); PP_ASSERT_WITH_CODE((0 == tmp_result), "Failed to enable SCLK control!", result = tmp_result); @@ -4359,6 +4362,15 @@ static int polaris10_notify_link_speed_change_after_state_change( return 0; } +static int polaris10_notify_smc_display(struct pp_hwmgr *hwmgr) +{ + struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + + smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, + (PPSMC_Msg)PPSMC_MSG_SetVBITimeout, data->frame_time_x2); + return (smum_send_msg_to_smc(hwmgr->smumgr, (PPSMC_Msg)PPSMC_HasDisplay) == 0) ? 0 : -EINVAL; +} + static int polaris10_set_power_state_tasks(struct pp_hwmgr *hwmgr, const void *input) { int tmp_result, result = 0; @@ -4407,6 +4419,11 @@ static int polaris10_set_power_state_tasks(struct pp_hwmgr *hwmgr, const void *i "Failed to program memory timing parameters!", result = tmp_result); + tmp_result = polaris10_notify_smc_display(hwmgr); + PP_ASSERT_WITH_CODE((0 == tmp_result), + "Failed to notify smc display settings!", + result = tmp_result); + tmp_result = polaris10_unfreeze_sclk_mclk_dpm(hwmgr); PP_ASSERT_WITH_CODE((0 == tmp_result), "Failed to unfreeze SCLK MCLK DPM!", @@ -4441,6 +4458,7 @@ static int polaris10_set_max_fan_pwm_output(struct pp_hwmgr *hwmgr, uint16_t us_ PPSMC_MSG_SetFanPwmMax, us_max_fan_pwm); } + int polaris10_notify_smc_display_change(struct pp_hwmgr *hwmgr, bool has_display) { PPSMC_Msg msg = has_display ? (PPSMC_Msg)PPSMC_HasDisplay : (PPSMC_Msg)PPSMC_NoDisplay; @@ -4460,8 +4478,6 @@ int polaris10_notify_smc_display_config_after_ps_adjustment(struct pp_hwmgr *hwm if (num_active_displays > 1) /* to do && (pHwMgr->pPECI->displayConfiguration.bMultiMonitorInSync != TRUE)) */ polaris10_notify_smc_display_change(hwmgr, false); - else - polaris10_notify_smc_display_change(hwmgr, true); return 0; } @@ -4502,6 +4518,8 @@ int polaris10_program_display_gap(struct pp_hwmgr *hwmgr) frame_time_in_us = 1000000 / refresh_rate; pre_vbi_time_in_us = frame_time_in_us - 200 - mode_info.vblank_time_us; + data->frame_time_x2 = frame_time_in_us * 2 / 100; + display_gap2 = pre_vbi_time_in_us * (ref_clock / 100); cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_DISPLAY_GAP_CNTL2, display_gap2); @@ -4510,8 +4528,6 @@ int polaris10_program_display_gap(struct pp_hwmgr *hwmgr) cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, data->soft_regs_start + offsetof(SMU74_SoftRegisters, VBlankTimeout), (frame_time_in_us - pre_vbi_time_in_us)); - polaris10_notify_smc_display_change(hwmgr, num_active_displays != 0); - return 0; } @@ -4623,7 +4639,7 @@ int polaris10_upload_mc_firmware(struct pp_hwmgr *hwmgr) return 0; } - data->need_long_memory_training = true; + data->need_long_memory_training = false; /* * PPMCME_FirmwareDescriptorEntry *pfd = NULL; diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h index d717789441f5..afc3434822d1 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h @@ -315,6 +315,7 @@ struct polaris10_hwmgr { uint32_t avfs_vdroop_override_setting; bool apply_avfs_cks_off_voltage; + uint32_t frame_time_x2; }; /* To convert to Q8.8 format for firmware */ diff --git a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h index 28f571449495..77e8e33d5870 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h +++ b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h @@ -411,6 +411,8 @@ struct phm_cac_tdp_table { uint8_t ucVr_I2C_Line; uint8_t ucPlx_I2C_address; uint8_t ucPlx_I2C_Line; + uint32_t usBoostPowerLimit; + uint8_t ucCKS_LDO_REFSEL; }; struct phm_ppm_table { -- cgit v1.2.3 From 0812a945fbb814e7946fbe6ddcc81d054c8b6c91 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 22 Jun 2016 21:00:09 +0800 Subject: drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation CKS on/off voltage offset calculation algorithm takes in a few coefficients. We need to update them for polaris to latest coefficients to align with BB. Signed-off-by: Rex Zhu Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 26 ++++++++++++++-------- 1 file changed, 17 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 20ccbc73a8f7..d23dcce6c03c 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -98,6 +98,7 @@ #define PCIE_BUS_CLK 10000 #define TCLK (PCIE_BUS_CLK / 10) +#define CEILING_UCHAR(double) ((double-(uint8_t)(double)) > 0 ? (uint8_t)(double+1) : (uint8_t)(double)) static const uint16_t polaris10_clock_stretcher_lookup_table[2][4] = { {600, 1050, 3, 0}, {600, 1050, 6, 1} }; @@ -1787,20 +1788,27 @@ static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr) ro = efuse * (max -min)/255 + min; - /* Populate Sclk_CKS_masterEn0_7 and Sclk_voltageOffset */ + /* Populate Sclk_CKS_masterEn0_7 and Sclk_voltageOffset + * there is a little difference in calculating + * volt_with_cks with windows */ for (i = 0; i < sclk_table->count; i++) { data->smc_state_table.Sclk_CKS_masterEn0_7 |= sclk_table->entries[i].cks_enable << i; - - volt_without_cks = (uint32_t)(((ro - 40) * 1000 - 2753594 - sclk_table->entries[i].clk/100 * 136418 /1000) / \ - (sclk_table->entries[i].clk/100 * 1132925 /10000 - 242418)/100); - - volt_with_cks = (uint32_t)((ro * 1000 -2396351 - sclk_table->entries[i].clk/100 * 329021/1000) / \ - (sclk_table->entries[i].clk/10000 * 649434 /1000 - 18005)/10); + if (hwmgr->chip_id == CHIP_POLARIS10) { + volt_without_cks = (uint32_t)((2753594000 + (sclk_table->entries[i].clk/100) * 136418 -(ro - 70) * 1000000) / \ + (2424180 - (sclk_table->entries[i].clk/100) * 1132925/1000)); + volt_with_cks = (uint32_t)((279720200 + sclk_table->entries[i].clk * 3232 - (ro - 65) * 100000000) / \ + (252248000 - sclk_table->entries[i].clk/100 * 115764)); + } else { + volt_without_cks = (uint32_t)((2416794800 + (sclk_table->entries[i].clk/100) * 1476925/10 -(ro - 50) * 1000000) / \ + (2625416 - (sclk_table->entries[i].clk/100) * 12586807/10000)); + volt_with_cks = (uint32_t)((2999656000 + sclk_table->entries[i].clk * 392803/100 - (ro - 44) * 1000000) / \ + (3422454 - sclk_table->entries[i].clk/100 * 18886376/10000)); + } if (volt_without_cks >= volt_with_cks) - volt_offset = (uint8_t)(((volt_without_cks - volt_with_cks + - sclk_table->entries[i].cks_voffset) * 100 / 625) + 1); + volt_offset = (uint8_t)CEILING_UCHAR((volt_without_cks - volt_with_cks + + sclk_table->entries[i].cks_voffset) * 100 / 625); data->smc_state_table.Sclk_voltageOffset[i] = volt_offset; } -- cgit v1.2.3 From 12afb34400eb2b301f06b2aa3535497d14faee59 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 23 Jun 2016 10:54:17 -0700 Subject: Input: wacom_w8001 - w8001_MAX_LENGTH should be 13 Somehow the patch that added two-finger touch support forgot to update W8001_MAX_LENGTH from 11 to 13. Signed-off-by: Ping Cheng Reviewed-by: Peter Hutterer Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wacom_w8001.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index bab3c6acf6a2..b1b412766da8 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -27,7 +27,7 @@ MODULE_AUTHOR("Jaya Kumar "); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -#define W8001_MAX_LENGTH 11 +#define W8001_MAX_LENGTH 13 #define W8001_LEAD_MASK 0x80 #define W8001_LEAD_BYTE 0x80 #define W8001_TAB_MASK 0x40 -- cgit v1.2.3 From 52fe705b493d40b472b9e7220a71bdca8537c6b2 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Tue, 21 Jun 2016 15:39:43 +1200 Subject: net: vrf: replace hard tab with space in assignment The assignment of rth->dst.output in vrf_rt6_create() and vrf_rtable_create() used a hard tab before the '='. The neighboring assignments did not. Make the assignment of rth->dst.output consistent with the surrounding code. Signed-off-by: Chris Packham Acked-by: David Ahern Signed-off-by: David S. Miller --- drivers/net/vrf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index dff08842f26d..8bd8c7e1ee87 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -304,7 +304,7 @@ static int vrf_rt6_create(struct net_device *dev) dst_hold(&rt6->dst); rt6->rt6i_table = rt6i_table; - rt6->dst.output = vrf_output6; + rt6->dst.output = vrf_output6; rcu_assign_pointer(vrf->rt6, rt6); rc = 0; @@ -403,7 +403,7 @@ static int vrf_rtable_create(struct net_device *dev) if (!rth) return -ENOMEM; - rth->dst.output = vrf_output; + rth->dst.output = vrf_output; rth->rt_table_id = vrf->tb_id; rcu_assign_pointer(vrf->rth, rth); -- cgit v1.2.3 From efeb2267bba8aa893afdadfc9bae4790777c600c Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Tue, 21 Jun 2016 16:26:49 +0800 Subject: geneve: fix tx_errors statistics Tx errors present summation of errors encountered while transmitting packets. Signed-off-by: Haishuang Yan Signed-off-by: David S. Miller --- drivers/net/geneve.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 305a04e45a13..cc39cefeae45 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -958,8 +958,8 @@ tx_error: dev->stats.collisions++; else if (err == -ENETUNREACH) dev->stats.tx_carrier_errors++; - else - dev->stats.tx_errors++; + + dev->stats.tx_errors++; return NETDEV_TX_OK; } @@ -1048,8 +1048,8 @@ tx_error: dev->stats.collisions++; else if (err == -ENETUNREACH) dev->stats.tx_carrier_errors++; - else - dev->stats.tx_errors++; + + dev->stats.tx_errors++; return NETDEV_TX_OK; } #endif -- cgit v1.2.3 From 9e72ac7492149a229ce9039c680849cb682d7092 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 23 Jun 2016 10:55:11 -0700 Subject: Input: wacom_w8001 - ignore invalid pen data packets ThinkPad X60 Tablet PC (pen only device) sometime posts packets that are larger than W8001_PKTLEN_TPCPEN. Reported-by: Chris J Arges Tested-by: Chris J Arges Signed-off-by: Ping Cheng Reviewed-by: Peter Hutterer Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wacom_w8001.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index b1b412766da8..0c9191cf324d 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -339,6 +339,15 @@ static irqreturn_t w8001_interrupt(struct serio *serio, w8001->idx = 0; parse_multi_touch(w8001); break; + + default: + /* + * ThinkPad X60 Tablet PC (pen only device) sometimes + * sends invalid data packets that are larger than + * W8001_PKTLEN_TPCPEN. Let's start over again. + */ + if (!w8001->touch_dev && w8001->idx > W8001_PKTLEN_TPCPEN - 1) + w8001->idx = 0; } return IRQ_HANDLED; -- cgit v1.2.3 From 226ba707744a51acb4244724e09caacb1d96aed9 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 21 Jun 2016 16:09:00 -0700 Subject: Input: elantech - add more IC body types to the list The touchpad in HP Pavilion 14-ab057ca reports it's version as 12 and according to Elan both 11 and 12 are valid IC types and should be identified as hw_version 4. Reported-by: Patrick Lessard Tested-by: Patrick Lessard Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 78f93cf68840..be5b399da5d3 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1568,13 +1568,7 @@ static int elantech_set_properties(struct elantech_data *etd) case 5: etd->hw_version = 3; break; - case 6: - case 7: - case 8: - case 9: - case 10: - case 13: - case 14: + case 6 ... 14: etd->hw_version = 4; break; default: -- cgit v1.2.3 From 3c67a829bd45f99b5c03580bb898c99fcc023356 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Thu, 23 Jun 2016 08:45:42 +0200 Subject: cpufreq: pcc-cpufreq: Fix doorbell.access_width Commit 920de6ebfab8 (ACPICA: Hardware: Enhance acpi_hw_validate_register() with access_width/bit_offset awareness) apparently exposed a latent bug, doorbell.access_width is initialized to 64, but per Lv Zheng, it should be 4, and indeed, making that change does bring pcc-cpufreq back to life. Fixes: 920de6ebfab8 (ACPICA: Hardware: Enhance acpi_hw_validate_register() with access_width/bit_offset awareness) Suggested-by: Lv Zheng Signed-off-by: Mike Galbraith Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/pcc-cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c index 808a320e9d5d..a7ecb9a84c15 100644 --- a/drivers/cpufreq/pcc-cpufreq.c +++ b/drivers/cpufreq/pcc-cpufreq.c @@ -487,7 +487,7 @@ static int __init pcc_cpufreq_probe(void) doorbell.space_id = reg_resource->space_id; doorbell.bit_width = reg_resource->bit_width; doorbell.bit_offset = reg_resource->bit_offset; - doorbell.access_width = 64; + doorbell.access_width = 4; doorbell.address = reg_resource->address; pr_debug("probe: doorbell: space_id is %d, bit_width is %d, " -- cgit v1.2.3 From 0d37189e80163c653771916afe28fae1a8d14daa Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 23 Jun 2016 11:18:43 +0900 Subject: PM / devfreq: Send the DEVFREQ_POSTCHANGE notification when target() is failed This patch sends the DEVFREQ_POSTCHANGE notification when devfreq->profile->targer() is failed. The PRECHANGE/POSTCHANGE should be paired. Fixes: 0fe3a66410a3 (PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier) Reported-by: Lin Huang Signed-off-by: Chanwoo Choi Signed-off-by: Rafael J. Wysocki --- drivers/devfreq/devfreq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index c7f47e34807b..e92418facc92 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -268,8 +268,11 @@ int update_devfreq(struct devfreq *devfreq) devfreq_notify_transition(devfreq, &freqs, DEVFREQ_PRECHANGE); err = devfreq->profile->target(devfreq->dev.parent, &freq, flags); - if (err) + if (err) { + freqs.new = cur_freq; + devfreq_notify_transition(devfreq, &freqs, DEVFREQ_POSTCHANGE); return err; + } freqs.new = freq; devfreq_notify_transition(devfreq, &freqs, DEVFREQ_POSTCHANGE); -- cgit v1.2.3 From 52dfcc5ccfbb6697ac3cac7f7ff1e712760e1216 Mon Sep 17 00:00:00 2001 From: Dmitrii Tcvetkov Date: Mon, 20 Jun 2016 13:52:14 +0300 Subject: drm/nouveau: fix for disabled fbdev emulation Hello, after this commit: commit f045f459d925138fe7d6193a8c86406bda7e49da Author: Ben Skeggs Date: Thu Jun 2 12:23:31 2016 +1000 drm/nouveau/fbcon: fix out-of-bounds memory accesses kernel started to oops when loading nouveau module when using GTX 780 Ti video adapter. This patch fixes the problem. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=120591 Signed-off-by: Dmitrii Tcvetkov Suggested-by: Ilia Mirkin Fixes: f045f459d925 ("nouveau_fbcon_init()") Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 300ea03be8f0..d1f248fd3506 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -552,7 +552,8 @@ nouveau_fbcon_init(struct drm_device *dev) if (ret) goto fini; - fbcon->helper.fbdev->pixmap.buf_align = 4; + if (fbcon->helper.fbdev) + fbcon->helper.fbdev->pixmap.buf_align = 4; return 0; fini: -- cgit v1.2.3 From 60842ef8128e7bf58c024814cd0dc14319232b6c Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Thu, 23 Jun 2016 17:37:34 -0700 Subject: Input: vmmouse - remove port reservation The VMWare EFI BIOS will expose port 0x5658 as an ACPI resource. This causes the port to be reserved by the APCI module as the system comes up, making it unavailable to be reserved again by other drivers, thus preserving this VMWare port for special use in a VMWare guest. This port is designed to be shared among multiple VMWare services, such as the VMMOUSE. Because of this, VMMOUSE should not try to reserve this port on its own. The VMWare non-EFI BIOS does not do this to preserve compatibility with existing/legacy VMs. It is known that there is small chance a VM may be configured such that these ports get reserved by other non-VMWare devices, and if this ever happens, the result is undefined. Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom Cc: # 4.1- Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/vmmouse.c | 22 ++-------------------- 1 file changed, 2 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c index a3f0f5a47490..0f586780ceb4 100644 --- a/drivers/input/mouse/vmmouse.c +++ b/drivers/input/mouse/vmmouse.c @@ -355,18 +355,11 @@ int vmmouse_detect(struct psmouse *psmouse, bool set_properties) return -ENXIO; } - if (!request_region(VMMOUSE_PROTO_PORT, 4, "vmmouse")) { - psmouse_dbg(psmouse, "VMMouse port in use.\n"); - return -EBUSY; - } - /* Check if the device is present */ response = ~VMMOUSE_PROTO_MAGIC; VMMOUSE_CMD(GETVERSION, 0, version, response, dummy1, dummy2); - if (response != VMMOUSE_PROTO_MAGIC || version == 0xffffffffU) { - release_region(VMMOUSE_PROTO_PORT, 4); + if (response != VMMOUSE_PROTO_MAGIC || version == 0xffffffffU) return -ENXIO; - } if (set_properties) { psmouse->vendor = VMMOUSE_VENDOR; @@ -374,8 +367,6 @@ int vmmouse_detect(struct psmouse *psmouse, bool set_properties) psmouse->model = version; } - release_region(VMMOUSE_PROTO_PORT, 4); - return 0; } @@ -394,7 +385,6 @@ static void vmmouse_disconnect(struct psmouse *psmouse) psmouse_reset(psmouse); input_unregister_device(priv->abs_dev); kfree(priv); - release_region(VMMOUSE_PROTO_PORT, 4); } /** @@ -438,15 +428,10 @@ int vmmouse_init(struct psmouse *psmouse) struct input_dev *rel_dev = psmouse->dev, *abs_dev; int error; - if (!request_region(VMMOUSE_PROTO_PORT, 4, "vmmouse")) { - psmouse_dbg(psmouse, "VMMouse port in use.\n"); - return -EBUSY; - } - psmouse_reset(psmouse); error = vmmouse_enable(psmouse); if (error) - goto release_region; + return error; priv = kzalloc(sizeof(*priv), GFP_KERNEL); abs_dev = input_allocate_device(); @@ -502,8 +487,5 @@ init_fail: kfree(priv); psmouse->private = NULL; -release_region: - release_region(VMMOUSE_PROTO_PORT, 4); - return error; } -- cgit v1.2.3 From 1ee6667cd8d183b2fed12f97285f184431d2caf9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 23 Jun 2016 17:50:39 -0700 Subject: libnvdimm, pfn, dax: fix initialization vs autodetect for mode + alignment The updated ndctl unit tests discovered that if a pfn configuration with a 4K alignment is read from the namespace, that alignment will be ignored in favor of the default 2M alignment. The result is that the configuration will fail initialization with a message like: dax6.1: bad offset: 0x22000 dax disabled align: 0x200000 Fix this by allowing the alignment read from the info block to override the default which is 2M not 0 in the autodetect path. This also fixes a similar problem with the mode and alignment settings silently being overwritten by the kernel when userspace has changed it. We now will either overwrite the info block if userspace changes the uuid or fail and warn if a live setting disagrees with the info block. Cc: Cc: Micah Parrish Cc: Toshi Kani Signed-off-by: Dan Williams --- drivers/nvdimm/pfn_devs.c | 51 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 40 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/nvdimm/pfn_devs.c b/drivers/nvdimm/pfn_devs.c index f7718ec685fa..cea8350fbc7e 100644 --- a/drivers/nvdimm/pfn_devs.c +++ b/drivers/nvdimm/pfn_devs.c @@ -344,6 +344,8 @@ struct device *nd_pfn_create(struct nd_region *nd_region) int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) { u64 checksum, offset; + unsigned long align; + enum nd_pfn_mode mode; struct nd_namespace_io *nsio; struct nd_pfn_sb *pfn_sb = nd_pfn->pfn_sb; struct nd_namespace_common *ndns = nd_pfn->ndns; @@ -386,22 +388,50 @@ int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) return -ENXIO; } + align = le32_to_cpu(pfn_sb->align); + offset = le64_to_cpu(pfn_sb->dataoff); + if (align == 0) + align = 1UL << ilog2(offset); + mode = le32_to_cpu(pfn_sb->mode); + if (!nd_pfn->uuid) { - /* from probe we allocate */ + /* + * When probing a namepace via nd_pfn_probe() the uuid + * is NULL (see: nd_pfn_devinit()) we init settings from + * pfn_sb + */ nd_pfn->uuid = kmemdup(pfn_sb->uuid, 16, GFP_KERNEL); if (!nd_pfn->uuid) return -ENOMEM; + nd_pfn->align = align; + nd_pfn->mode = mode; } else { - /* from init we validate */ + /* + * When probing a pfn / dax instance we validate the + * live settings against the pfn_sb + */ if (memcmp(nd_pfn->uuid, pfn_sb->uuid, 16) != 0) return -ENODEV; + + /* + * If the uuid validates, but other settings mismatch + * return EINVAL because userspace has managed to change + * the configuration without specifying new + * identification. + */ + if (nd_pfn->align != align || nd_pfn->mode != mode) { + dev_err(&nd_pfn->dev, + "init failed, settings mismatch\n"); + dev_dbg(&nd_pfn->dev, "align: %lx:%lx mode: %d:%d\n", + nd_pfn->align, align, nd_pfn->mode, + mode); + return -EINVAL; + } } - if (nd_pfn->align == 0) - nd_pfn->align = le32_to_cpu(pfn_sb->align); - if (nd_pfn->align > nvdimm_namespace_capacity(ndns)) { + if (align > nvdimm_namespace_capacity(ndns)) { dev_err(&nd_pfn->dev, "alignment: %lx exceeds capacity %llx\n", - nd_pfn->align, nvdimm_namespace_capacity(ndns)); + align, nvdimm_namespace_capacity(ndns)); return -EINVAL; } @@ -411,7 +441,6 @@ int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) * namespace has changed since the pfn superblock was * established. */ - offset = le64_to_cpu(pfn_sb->dataoff); nsio = to_nd_namespace_io(&ndns->dev); if (offset >= resource_size(&nsio->res)) { dev_err(&nd_pfn->dev, "pfn array size exceeds capacity of %s\n", @@ -419,10 +448,11 @@ int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) return -EBUSY; } - if ((nd_pfn->align && !IS_ALIGNED(offset, nd_pfn->align)) + if ((align && !IS_ALIGNED(offset, align)) || !IS_ALIGNED(offset, PAGE_SIZE)) { - dev_err(&nd_pfn->dev, "bad offset: %#llx dax disabled\n", - offset); + dev_err(&nd_pfn->dev, + "bad offset: %#llx dax disabled align: %#lx\n", + offset, align); return -ENXIO; } @@ -502,7 +532,6 @@ static struct vmem_altmap *__nvdimm_setup_pfn(struct nd_pfn *nd_pfn, res->start += start_pad; res->end -= end_trunc; - nd_pfn->mode = le32_to_cpu(nd_pfn->pfn_sb->mode); if (nd_pfn->mode == PFN_MODE_RAM) { if (offset < SZ_8K) return ERR_PTR(-EINVAL); -- cgit v1.2.3 From 81e257e964268d050f8e9188becd44d50f241d72 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Thu, 23 Jun 2016 13:45:06 +0200 Subject: drm/atomic: Make drm_atomic_legacy_backoff reset crtc->acquire_ctx Atomic updates may acquire more state than initially locked through drm_modeset_lock_crtc, running with heavy stress can cause a WARN_ON(crtc->acquire_ctx) in drm_modeset_lock_crtc: [ 601.491296] ------------[ cut here ]------------ [ 601.491366] WARNING: CPU: 0 PID: 2411 at drivers/gpu/drm/drm_modeset_lock.c:191 drm_modeset_lock_crtc+0xeb/0xf0 [drm] [ 601.491369] Modules linked in: drm i915 drm_kms_helper [ 601.491414] CPU: 0 PID: 2411 Comm: kms_cursor_lega Tainted: G U 4.7.0-rc4-patser+ #4798 [ 601.491417] Hardware name: Intel Corporation Skylake Client [ 601.491420] 0000000000000000 ffff88044d153c98 ffffffff812ead28 0000000000000000 [ 601.491425] 0000000000000000 ffff88044d153cd8 ffffffff810868e6 000000bf58058030 [ 601.491431] ffff880088b415e8 ffff880458058030 ffff88008a271548 ffff88008a271568 [ 601.491436] Call Trace: [ 601.491443] [] dump_stack+0x4d/0x65 [ 601.491447] [] __warn+0xc6/0xe0 [ 601.491452] [] warn_slowpath_null+0x18/0x20 [ 601.491472] [] drm_modeset_lock_crtc+0xeb/0xf0 [drm] [ 601.491491] [] drm_mode_cursor_common+0x66/0x180 [drm] [ 601.491509] [] drm_mode_cursor_ioctl+0x3c/0x40 [drm] [ 601.491524] [] drm_ioctl+0x14d/0x530 [drm] [ 601.491540] [] ? drm_mode_setcrtc+0x520/0x520 [drm] [ 601.491545] [] ? handle_mm_fault+0x106b/0x1430 [ 601.491550] [] ? stop_one_cpu+0x61/0x70 [ 601.491556] [] do_vfs_ioctl+0x8d/0x570 [ 601.491560] [] ? security_file_ioctl+0x3e/0x60 [ 601.491565] [] SyS_ioctl+0x74/0x80 [ 601.491571] [] ? posix_get_monotonic_raw+0xc/0x10 [ 601.491576] [] entry_SYSCALL_64_fastpath+0x13/0x8f [ 601.491581] ---[ end trace 56f3d3d85f000d00 ]--- For good measure, test mode_config.acquire_ctx too, although this should never happen. Testcase: kms_cursor_legacy Signed-off-by: Maarten Lankhorst Reviewed-by: Daniel Vetter Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_atomic.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index c204ef32df16..9bb99e274d23 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -1296,14 +1296,39 @@ EXPORT_SYMBOL(drm_atomic_add_affected_planes); */ void drm_atomic_legacy_backoff(struct drm_atomic_state *state) { + struct drm_device *dev = state->dev; + unsigned crtc_mask = 0; + struct drm_crtc *crtc; int ret; + bool global = false; + + drm_for_each_crtc(crtc, dev) { + if (crtc->acquire_ctx != state->acquire_ctx) + continue; + + crtc_mask |= drm_crtc_mask(crtc); + crtc->acquire_ctx = NULL; + } + + if (WARN_ON(dev->mode_config.acquire_ctx == state->acquire_ctx)) { + global = true; + + dev->mode_config.acquire_ctx = NULL; + } retry: drm_modeset_backoff(state->acquire_ctx); - ret = drm_modeset_lock_all_ctx(state->dev, state->acquire_ctx); + ret = drm_modeset_lock_all_ctx(dev, state->acquire_ctx); if (ret) goto retry; + + drm_for_each_crtc(crtc, dev) + if (drm_crtc_mask(crtc) & crtc_mask) + crtc->acquire_ctx = state->acquire_ctx; + + if (global) + dev->mode_config.acquire_ctx = state->acquire_ctx; } EXPORT_SYMBOL(drm_atomic_legacy_backoff); -- cgit v1.2.3 From 93a2001bdfd5376c3dc2158653034c20392d15c5 Mon Sep 17 00:00:00 2001 From: Scott Bauer Date: Thu, 23 Jun 2016 08:59:47 -0600 Subject: HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commands This patch validates the num_values parameter from userland during the HIDIOCGUSAGES and HIDIOCSUSAGES commands. Previously, if the report id was set to HID_REPORT_ID_UNKNOWN, we would fail to validate the num_values parameter leading to a heap overflow. Cc: stable@vger.kernel.org Signed-off-by: Scott Bauer Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 2f1ddca6f2e0..700145b15088 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -516,13 +516,13 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd, goto inval; } else if (uref->usage_index >= field->report_count) goto inval; - - else if ((cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) && - (uref_multi->num_values > HID_MAX_MULTI_USAGES || - uref->usage_index + uref_multi->num_values > field->report_count)) - goto inval; } + if ((cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) && + (uref_multi->num_values > HID_MAX_MULTI_USAGES || + uref->usage_index + uref_multi->num_values > field->report_count)) + goto inval; + switch (cmd) { case HIDIOCGUSAGE: uref->value = field->value[uref->usage_index]; -- cgit v1.2.3 From d2bd05d88d245c13b64c3bf9c8927a1c56453d8c Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 24 Jun 2016 03:13:34 -0600 Subject: xen-pciback: return proper values during BAR sizing Reads following writes with all address bits set to 1 should return all changeable address bits as one, not the BAR size (nor, as was the case for the upper half of 64-bit BARs, the high half of the region's end address). Presumably this didn't cause any problems so far because consumers use the value to calculate the size (usually via val & -val), and do nothing else with it. But also consider the exception here: Unimplemented BARs should always return all zeroes. And finally, the check for whether to return the sizing address on read for the ROM BAR should ignore all non-address bits, not just the ROM Enable one. Signed-off-by: Jan Beulich Reviewed-by: Boris Ostrovsky Signed-off-by: David Vrabel --- drivers/xen/xen-pciback/conf_space_header.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/xen-pciback/conf_space_header.c b/drivers/xen/xen-pciback/conf_space_header.c index ad3d17d29c81..9ead1c2ff1dd 100644 --- a/drivers/xen/xen-pciback/conf_space_header.c +++ b/drivers/xen/xen-pciback/conf_space_header.c @@ -145,7 +145,7 @@ static int rom_write(struct pci_dev *dev, int offset, u32 value, void *data) /* A write to obtain the length must happen as a 32-bit write. * This does not (yet) support writing individual bytes */ - if (value == ~PCI_ROM_ADDRESS_ENABLE) + if ((value | ~PCI_ROM_ADDRESS_MASK) == ~0U) bar->which = 1; else { u32 tmpval; @@ -225,38 +225,42 @@ static inline void read_dev_bar(struct pci_dev *dev, (PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64))) { bar_info->val = res[pos - 1].start >> 32; - bar_info->len_val = res[pos - 1].end >> 32; + bar_info->len_val = -resource_size(&res[pos - 1]) >> 32; return; } } + if (!res[pos].flags || + (res[pos].flags & (IORESOURCE_DISABLED | IORESOURCE_UNSET | + IORESOURCE_BUSY))) + return; + bar_info->val = res[pos].start | (res[pos].flags & PCI_REGION_FLAG_MASK); - bar_info->len_val = resource_size(&res[pos]); + bar_info->len_val = -resource_size(&res[pos]) | + (res[pos].flags & PCI_REGION_FLAG_MASK); } static void *bar_init(struct pci_dev *dev, int offset) { - struct pci_bar_info *bar = kmalloc(sizeof(*bar), GFP_KERNEL); + struct pci_bar_info *bar = kzalloc(sizeof(*bar), GFP_KERNEL); if (!bar) return ERR_PTR(-ENOMEM); read_dev_bar(dev, bar, offset, ~0); - bar->which = 0; return bar; } static void *rom_init(struct pci_dev *dev, int offset) { - struct pci_bar_info *bar = kmalloc(sizeof(*bar), GFP_KERNEL); + struct pci_bar_info *bar = kzalloc(sizeof(*bar), GFP_KERNEL); if (!bar) return ERR_PTR(-ENOMEM); read_dev_bar(dev, bar, offset, ~PCI_ROM_ADDRESS_ENABLE); - bar->which = 0; return bar; } -- cgit v1.2.3 From 4995734e973a2c2e9c6f6413cbad9913fc4df0dc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 24 Jun 2016 09:07:39 -0700 Subject: acpi, nfit: fix acpi_check_dsm() vs zero functions implemented QEMU 2.6 implements nascent support for nvdimm DSMs. Depending on configuration it may only implement the function0 dsm to indicate that no other DSMs are available. Commit 31eca76ba2fc "nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism" breaks QEMU, but QEMU is spec compliant. Per the spec the way to indicate that no functions are supported is: If Function Index is zero, the return is a buffer containing one bit for each function index, starting with zero. Bit 0 indicates whether there is support for any functions other than function 0 for the specified UUID and Revision ID. If set to zero, no functions are supported (other than function zero) for the specified UUID and Revision ID. Update the nfit driver to determine the family (interface UUID) without requiring the implementation to define any other functions, i.e. short-circuit acpi_check_dsm() to succeed per the spec. The nfit driver appears to be the only user passing funcs==0 to acpi_check_dsm(), so this behavior change of the common routine should be limited to the probing done by the nfit driver. Cc: Len Brown Cc: Jerry Hoemann Acked-by: "Rafael J. Wysocki" Fixes: 31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism") Reported-by: Xiao Guangrong Tested-by: Xiao Guangrong Signed-off-by: Dan Williams --- drivers/acpi/nfit.c | 6 +++--- drivers/acpi/utils.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c index 2215fc847fa9..32579a7b71d5 100644 --- a/drivers/acpi/nfit.c +++ b/drivers/acpi/nfit.c @@ -1131,11 +1131,11 @@ static int acpi_nfit_add_dimm(struct acpi_nfit_desc *acpi_desc, /* * Until standardization materializes we need to consider up to 3 - * different command sets. Note, that checking for function0 (bit0) - * tells us if any commands are reachable through this uuid. + * different command sets. Note, that checking for zero functions + * tells us if any commands might be reachable through this uuid. */ for (i = NVDIMM_FAMILY_INTEL; i <= NVDIMM_FAMILY_HPE2; i++) - if (acpi_check_dsm(adev_dimm->handle, to_nfit_uuid(i), 1, 1)) + if (acpi_check_dsm(adev_dimm->handle, to_nfit_uuid(i), 1, 0)) break; /* limit the supported commands to those that are publicly documented */ diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index 22c09952e177..b4de130f2d57 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -680,9 +680,6 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, u64 rev, u64 funcs) u64 mask = 0; union acpi_object *obj; - if (funcs == 0) - return false; - obj = acpi_evaluate_dsm(handle, uuid, rev, 0, NULL); if (!obj) return false; @@ -695,6 +692,9 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, u64 rev, u64 funcs) mask |= (((u64)obj->buffer.pointer[i]) << (i * 8)); ACPI_FREE(obj); + if (funcs == 0) + return true; + /* * Bit 0 indicates whether there's support for any functions other than * function 0 for the specified UUID and revision. -- cgit v1.2.3 From 32d6bd9059f265f617f6502c68dfbcae7e515add Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Fri, 24 Jun 2016 14:48:47 -0700 Subject: tree wide: get rid of __GFP_REPEAT for order-0 allocations part I This is the third version of the patchset previously sent [1]. I have basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get rid of superfluous gfp flags" which went through dm tree. I am sending it now because it is tree wide and chances for conflicts are reduced considerably when we want to target rc2. I plan to send the next step and rename the flag and move to a better semantic later during this release cycle so we will have a new semantic ready for 4.8 merge window hopefully. Motivation: While working on something unrelated I've checked the current usage of __GFP_REPEAT in the tree. It seems that a majority of the usage is and always has been bogus because __GFP_REPEAT has always been about costly high order allocations while we are using it for order-0 or very small orders very often. It seems that a big pile of them is just a copy&paste when a code has been adopted from one arch to another. I think it makes some sense to get rid of them because they are just making the semantic more unclear. Please note that GFP_REPEAT is documented as * __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt * _might_ fail. This depends upon the particular VM implementation. while !costly requests have basically nofail semantic. So one could reasonably expect that order-0 request with __GFP_REPEAT will not loop for ever. This is not implemented right now though. I would like to move on with __GFP_REPEAT and define a better semantic for it. $ git grep __GFP_REPEAT origin/master | wc -l 111 $ git grep __GFP_REPEAT | wc -l 36 So we are down to the third after this patch series. The remaining places really seem to be relying on __GFP_REPEAT due to large allocation requests. This still needs some double checking which I will do later after all the simple ones are sorted out. I am touching a lot of arch specific code here and I hope I got it right but as a matter of fact I even didn't compile test for some archs as I do not have cross compiler for them. Patches should be quite trivial to review for stupid compile mistakes though. The tricky parts are usually hidden by macro definitions and thats where I would appreciate help from arch maintainers. [1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org This patch (of 19): __GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. Yet we have the full kernel tree with its usage for apparently order-0 allocations. This is really confusing because __GFP_REPEAT is explicitly documented to allow allocation failures which is a weaker semantic than the current order-0 has (basically nofail). Let's simply drop __GFP_REPEAT from those places. This would allow to identify place which really need allocator to retry harder and formulate a more specific semantic for what the flag is supposed to do actually. Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko Cc: "David S. Miller" Cc: "H. Peter Anvin" Cc: "James E.J. Bottomley" Cc: "Theodore Ts'o" Cc: Andy Lutomirski Cc: Benjamin Herrenschmidt Cc: Catalin Marinas Cc: Chen Liqin Cc: Chris Metcalf [for tile] Cc: Guan Xuetao Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Jan Kara Cc: John Crispin Cc: Lennox Wu Cc: Ley Foon Tan Cc: Martin Schwidefsky Cc: Matt Fleming Cc: Ralf Baechle Cc: Rich Felker Cc: Russell King Cc: Thomas Gleixner Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/pgalloc.h | 4 ++-- arch/arm/include/asm/pgalloc.h | 2 +- arch/avr32/include/asm/pgalloc.h | 6 +++--- arch/cris/include/asm/pgalloc.h | 4 ++-- arch/frv/mm/pgalloc.c | 6 +++--- arch/hexagon/include/asm/pgalloc.h | 4 ++-- arch/m68k/include/asm/mcf_pgalloc.h | 4 ++-- arch/m68k/include/asm/motorola_pgalloc.h | 4 ++-- arch/m68k/include/asm/sun3_pgalloc.h | 4 ++-- arch/metag/include/asm/pgalloc.h | 5 ++--- arch/microblaze/include/asm/pgalloc.h | 4 ++-- arch/microblaze/mm/pgtable.c | 3 +-- arch/mn10300/mm/pgtable.c | 6 +++--- arch/openrisc/include/asm/pgalloc.h | 2 +- arch/openrisc/mm/ioremap.c | 2 +- arch/parisc/include/asm/pgalloc.h | 4 ++-- arch/powerpc/include/asm/book3s/64/pgalloc.h | 2 +- arch/powerpc/include/asm/nohash/64/pgalloc.h | 2 +- arch/powerpc/mm/pgtable_32.c | 4 ++-- arch/powerpc/mm/pgtable_64.c | 3 +-- arch/sh/include/asm/pgalloc.h | 4 ++-- arch/sparc/mm/init_64.c | 6 ++---- arch/um/kernel/mem.c | 4 ++-- arch/x86/include/asm/pgalloc.h | 4 ++-- arch/x86/xen/p2m.c | 2 +- arch/xtensa/include/asm/pgalloc.h | 2 +- drivers/block/aoe/aoecmd.c | 2 +- 27 files changed, 47 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/arch/alpha/include/asm/pgalloc.h b/arch/alpha/include/asm/pgalloc.h index aab14a019c20..c2ebb6f36c9d 100644 --- a/arch/alpha/include/asm/pgalloc.h +++ b/arch/alpha/include/asm/pgalloc.h @@ -40,7 +40,7 @@ pgd_free(struct mm_struct *mm, pgd_t *pgd) static inline pmd_t * pmd_alloc_one(struct mm_struct *mm, unsigned long address) { - pmd_t *ret = (pmd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pmd_t *ret = (pmd_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); return ret; } @@ -53,7 +53,7 @@ pmd_free(struct mm_struct *mm, pmd_t *pmd) static inline pte_t * pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); return pte; } diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index 19cfab526d13..20febb368844 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -29,7 +29,7 @@ static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) { - return (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT); + return (pmd_t *)get_zeroed_page(GFP_KERNEL); } static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h index 1aba19d68c5e..db039cb368be 100644 --- a/arch/avr32/include/asm/pgalloc.h +++ b/arch/avr32/include/asm/pgalloc.h @@ -43,7 +43,7 @@ static inline void pgd_ctor(void *x) */ static inline pgd_t *pgd_alloc(struct mm_struct *mm) { - return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor); + return quicklist_alloc(QUICK_PGD, GFP_KERNEL, pgd_ctor); } static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) @@ -54,7 +54,7 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); + return quicklist_alloc(QUICK_PT, GFP_KERNEL, NULL); } static inline pgtable_t pte_alloc_one(struct mm_struct *mm, @@ -63,7 +63,7 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm, struct page *page; void *pg; - pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); + pg = quicklist_alloc(QUICK_PT, GFP_KERNEL, NULL); if (!pg) return NULL; diff --git a/arch/cris/include/asm/pgalloc.h b/arch/cris/include/asm/pgalloc.h index 235ece437ddd..42f1affb9c2d 100644 --- a/arch/cris/include/asm/pgalloc.h +++ b/arch/cris/include/asm/pgalloc.h @@ -24,14 +24,14 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); return pte; } static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { struct page *pte; - pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); + pte = alloc_pages(GFP_KERNEL|__GFP_ZERO, 0); if (!pte) return NULL; if (!pgtable_page_ctor(pte)) { diff --git a/arch/frv/mm/pgalloc.c b/arch/frv/mm/pgalloc.c index 41907d25ed38..c9ed14f6c67d 100644 --- a/arch/frv/mm/pgalloc.c +++ b/arch/frv/mm/pgalloc.c @@ -22,7 +22,7 @@ pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((aligned(PAGE_SIZE))); pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT); + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL); if (pte) clear_page(pte); return pte; @@ -33,9 +33,9 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) struct page *page; #ifdef CONFIG_HIGHPTE - page = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT, 0); + page = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM, 0); #else - page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0); + page = alloc_pages(GFP_KERNEL, 0); #endif if (!page) return NULL; diff --git a/arch/hexagon/include/asm/pgalloc.h b/arch/hexagon/include/asm/pgalloc.h index 77da3b0ae3c2..eeebf862c46c 100644 --- a/arch/hexagon/include/asm/pgalloc.h +++ b/arch/hexagon/include/asm/pgalloc.h @@ -64,7 +64,7 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm, { struct page *pte; - pte = alloc_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); + pte = alloc_page(GFP_KERNEL | __GFP_ZERO); if (!pte) return NULL; if (!pgtable_page_ctor(pte)) { @@ -78,7 +78,7 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm, static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - gfp_t flags = GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO; + gfp_t flags = GFP_KERNEL | __GFP_ZERO; return (pte_t *) __get_free_page(flags); } diff --git a/arch/m68k/include/asm/mcf_pgalloc.h b/arch/m68k/include/asm/mcf_pgalloc.h index f9924fbcfe42..fb95aed5f428 100644 --- a/arch/m68k/include/asm/mcf_pgalloc.h +++ b/arch/m68k/include/asm/mcf_pgalloc.h @@ -14,7 +14,7 @@ extern const char bad_pmd_string[]; extern inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - unsigned long page = __get_free_page(GFP_DMA|__GFP_REPEAT); + unsigned long page = __get_free_page(GFP_DMA); if (!page) return NULL; @@ -51,7 +51,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page, static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) { - struct page *page = alloc_pages(GFP_DMA|__GFP_REPEAT, 0); + struct page *page = alloc_pages(GFP_DMA, 0); pte_t *pte; if (!page) diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h index 24bcba496c75..c895b987202c 100644 --- a/arch/m68k/include/asm/motorola_pgalloc.h +++ b/arch/m68k/include/asm/motorola_pgalloc.h @@ -11,7 +11,7 @@ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long ad { pte_t *pte; - pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); if (pte) { __flush_page_to_ram(pte); flush_tlb_kernel_page(pte); @@ -32,7 +32,7 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addres struct page *page; pte_t *pte; - page = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); + page = alloc_pages(GFP_KERNEL|__GFP_ZERO, 0); if(!page) return NULL; if (!pgtable_page_ctor(page)) { diff --git a/arch/m68k/include/asm/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h index 0931388de47f..1901f61f926f 100644 --- a/arch/m68k/include/asm/sun3_pgalloc.h +++ b/arch/m68k/include/asm/sun3_pgalloc.h @@ -37,7 +37,7 @@ do { \ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - unsigned long page = __get_free_page(GFP_KERNEL|__GFP_REPEAT); + unsigned long page = __get_free_page(GFP_KERNEL); if (!page) return NULL; @@ -49,7 +49,7 @@ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { - struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0); + struct page *page = alloc_pages(GFP_KERNEL, 0); if (page == NULL) return NULL; diff --git a/arch/metag/include/asm/pgalloc.h b/arch/metag/include/asm/pgalloc.h index 3104df0a4822..c2caa1ee4360 100644 --- a/arch/metag/include/asm/pgalloc.h +++ b/arch/metag/include/asm/pgalloc.h @@ -42,8 +42,7 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | - __GFP_ZERO); + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO); return pte; } @@ -51,7 +50,7 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { struct page *pte; - pte = alloc_pages(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO, 0); + pte = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0); if (!pte) return NULL; if (!pgtable_page_ctor(pte)) { diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h index 61436d69775c..7c89390c0c13 100644 --- a/arch/microblaze/include/asm/pgalloc.h +++ b/arch/microblaze/include/asm/pgalloc.h @@ -116,9 +116,9 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm, struct page *ptepage; #ifdef CONFIG_HIGHPTE - int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT; + int flags = GFP_KERNEL | __GFP_HIGHMEM; #else - int flags = GFP_KERNEL | __GFP_REPEAT; + int flags = GFP_KERNEL; #endif ptepage = alloc_pages(flags, 0); diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c index 4f4520e779a5..eb99fcc76088 100644 --- a/arch/microblaze/mm/pgtable.c +++ b/arch/microblaze/mm/pgtable.c @@ -239,8 +239,7 @@ __init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, { pte_t *pte; if (mem_init_done) { - pte = (pte_t *)__get_free_page(GFP_KERNEL | - __GFP_REPEAT | __GFP_ZERO); + pte = (pte_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO); } else { pte = (pte_t *)early_get_page(); if (pte) diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c index e77a7c728081..9577cf768875 100644 --- a/arch/mn10300/mm/pgtable.c +++ b/arch/mn10300/mm/pgtable.c @@ -63,7 +63,7 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags) pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT); + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL); if (pte) clear_page(pte); return pte; @@ -74,9 +74,9 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) struct page *pte; #ifdef CONFIG_HIGHPTE - pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT, 0); + pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM, 0); #else - pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0); + pte = alloc_pages(GFP_KERNEL, 0); #endif if (!pte) return NULL; diff --git a/arch/openrisc/include/asm/pgalloc.h b/arch/openrisc/include/asm/pgalloc.h index 21484e5b9e9a..87eebd185089 100644 --- a/arch/openrisc/include/asm/pgalloc.h +++ b/arch/openrisc/include/asm/pgalloc.h @@ -77,7 +77,7 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) { struct page *pte; - pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0); + pte = alloc_pages(GFP_KERNEL, 0); if (!pte) return NULL; clear_page(page_address(pte)); diff --git a/arch/openrisc/mm/ioremap.c b/arch/openrisc/mm/ioremap.c index 62b08ef392be..5b2a95116e8f 100644 --- a/arch/openrisc/mm/ioremap.c +++ b/arch/openrisc/mm/ioremap.c @@ -122,7 +122,7 @@ pte_t __init_refok *pte_alloc_one_kernel(struct mm_struct *mm, pte_t *pte; if (likely(mem_init_done)) { - pte = (pte_t *) __get_free_page(GFP_KERNEL | __GFP_REPEAT); + pte = (pte_t *) __get_free_page(GFP_KERNEL); } else { pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); #if 0 diff --git a/arch/parisc/include/asm/pgalloc.h b/arch/parisc/include/asm/pgalloc.h index f2fd327dce2e..52c3defb40c9 100644 --- a/arch/parisc/include/asm/pgalloc.h +++ b/arch/parisc/include/asm/pgalloc.h @@ -124,7 +124,7 @@ pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { - struct page *page = alloc_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + struct page *page = alloc_page(GFP_KERNEL|__GFP_ZERO); if (!page) return NULL; if (!pgtable_page_ctor(page)) { @@ -137,7 +137,7 @@ pte_alloc_one(struct mm_struct *mm, unsigned long address) static inline pte_t * pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr) { - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); return pte; } diff --git a/arch/powerpc/include/asm/book3s/64/pgalloc.h b/arch/powerpc/include/asm/book3s/64/pgalloc.h index 488279edb1f0..049b80359db6 100644 --- a/arch/powerpc/include/asm/book3s/64/pgalloc.h +++ b/arch/powerpc/include/asm/book3s/64/pgalloc.h @@ -151,7 +151,7 @@ static inline pgtable_t pmd_pgtable(pmd_t pmd) static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); + return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO); } static inline pgtable_t pte_alloc_one(struct mm_struct *mm, diff --git a/arch/powerpc/include/asm/nohash/64/pgalloc.h b/arch/powerpc/include/asm/nohash/64/pgalloc.h index 069369f6414b..8a8a7d991249 100644 --- a/arch/powerpc/include/asm/nohash/64/pgalloc.h +++ b/arch/powerpc/include/asm/nohash/64/pgalloc.h @@ -88,7 +88,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); + return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO); } static inline pgtable_t pte_alloc_one(struct mm_struct *mm, diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index bf7bf32b54f8..7f922f557936 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -84,7 +84,7 @@ __init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long add pte_t *pte; if (slab_is_available()) { - pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); } else { pte = __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE)); if (pte) @@ -97,7 +97,7 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { struct page *ptepage; - gfp_t flags = GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO; + gfp_t flags = GFP_KERNEL | __GFP_ZERO; ptepage = alloc_pages(flags, 0); if (!ptepage) diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index e009e0604a8a..f5e8d4edb808 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -350,8 +350,7 @@ static pte_t *get_from_cache(struct mm_struct *mm) static pte_t *__alloc_for_cache(struct mm_struct *mm, int kernel) { void *ret = NULL; - struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | - __GFP_REPEAT | __GFP_ZERO); + struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO); if (!page) return NULL; if (!kernel && !pgtable_page_ctor(page)) { diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h index a33673b3687d..f3f42c84c40f 100644 --- a/arch/sh/include/asm/pgalloc.h +++ b/arch/sh/include/asm/pgalloc.h @@ -34,7 +34,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); + return quicklist_alloc(QUICK_PT, GFP_KERNEL, NULL); } static inline pgtable_t pte_alloc_one(struct mm_struct *mm, @@ -43,7 +43,7 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm, struct page *page; void *pg; - pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); + pg = quicklist_alloc(QUICK_PT, GFP_KERNEL, NULL); if (!pg) return NULL; page = virt_to_page(pg); diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 14bb0d5ed3c6..aec508e37490 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -2704,8 +2704,7 @@ void __flush_tlb_all(void) pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | - __GFP_REPEAT | __GFP_ZERO); + struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO); pte_t *pte = NULL; if (page) @@ -2717,8 +2716,7 @@ pte_t *pte_alloc_one_kernel(struct mm_struct *mm, pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { - struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | - __GFP_REPEAT | __GFP_ZERO); + struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO); if (!page) return NULL; if (!pgtable_page_ctor(page)) { diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index b2a2dff50b4e..e7437ec62710 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -204,7 +204,7 @@ pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { pte_t *pte; - pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); return pte; } @@ -212,7 +212,7 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { struct page *pte; - pte = alloc_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + pte = alloc_page(GFP_KERNEL|__GFP_ZERO); if (!pte) return NULL; if (!pgtable_page_ctor(pte)) { diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h index bf7f8b55b0f9..574c23cf761a 100644 --- a/arch/x86/include/asm/pgalloc.h +++ b/arch/x86/include/asm/pgalloc.h @@ -81,7 +81,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) { struct page *page; - page = alloc_pages(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO, 0); + page = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0); if (!page) return NULL; if (!pgtable_pmd_page_ctor(page)) { @@ -125,7 +125,7 @@ static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud) static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) { - return (pud_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT); + return (pud_t *)get_zeroed_page(GFP_KERNEL); } static inline void pud_free(struct mm_struct *mm, pud_t *pud) diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index cab9f766bb06..dd2a49a8aacc 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -182,7 +182,7 @@ static void * __ref alloc_p2m_page(void) if (unlikely(!slab_is_available())) return alloc_bootmem_align(PAGE_SIZE, PAGE_SIZE); - return (void *)__get_free_page(GFP_KERNEL | __GFP_REPEAT); + return (void *)__get_free_page(GFP_KERNEL); } static void __ref free_p2m_page(void *p) diff --git a/arch/xtensa/include/asm/pgalloc.h b/arch/xtensa/include/asm/pgalloc.h index d38eb9237e64..1065bc8bcae5 100644 --- a/arch/xtensa/include/asm/pgalloc.h +++ b/arch/xtensa/include/asm/pgalloc.h @@ -44,7 +44,7 @@ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, pte_t *ptep; int i; - ptep = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT); + ptep = (pte_t *)__get_free_page(GFP_KERNEL); if (!ptep) return NULL; for (i = 0; i < 1024; i++) diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index d597e432e195..ab19adb07a12 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -1750,7 +1750,7 @@ aoecmd_init(void) int ret; /* get_zeroed_page returns page with ref count 1 */ - p = (void *) get_zeroed_page(GFP_KERNEL | __GFP_REPEAT); + p = (void *) get_zeroed_page(GFP_KERNEL); if (!p) return -ENOMEM; empty_page = virt_to_page(p); -- cgit v1.2.3 From 1b45996d2ebf9680ccd0db875fc668aa025f40fd Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 17 May 2016 11:41:04 -0700 Subject: tty: vt: Fix soft lockup in fbcon cursor blink timer. We are getting somewhat random soft lockups with this signature: [ 86.992215] [] el1_irq+0xa0/0x10c [ 86.997082] [] cursor_timer_handler+0x30/0x54 [ 87.002991] [] call_timer_fn+0x54/0x1a8 [ 87.008378] [] run_timer_softirq+0x1c4/0x2bc [ 87.014200] [] __do_softirq+0x114/0x344 [ 87.019590] [] irq_exit+0x74/0x98 [ 87.024458] [] __handle_domain_irq+0x98/0xfc [ 87.030278] [] gic_handle_irq+0x94/0x190 This is caused by the vt visual_init() function calling into fbcon_init() with a vc_cur_blink_ms value of zero. This is a transient condition, as it is later set to a non-zero value. But, if the timer happens to expire while the blink rate is zero, it goes into an endless loop, and we get soft lockup. The fix is to initialize vc_cur_blink_ms before calling the con_init() function. Signed-off-by: David Daney Cc: stable@vger.kernel.org Acked-by: Pavel Machek Tested-by: Ming Lei Acked-by: Scot Doyle Tested-by: Henrique de Moraes Holschuh Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index dc125322f48f..5b0fe97c46ca 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -750,6 +750,7 @@ static void visual_init(struct vc_data *vc, int num, int init) vc->vc_complement_mask = 0; vc->vc_can_do_color = 0; vc->vc_panic_force_write = false; + vc->vc_cur_blink_ms = DEFAULT_CURSOR_BLINK_MS; vc->vc_sw->con_init(vc, init); if (!vc->vc_complement_mask) vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800; -- cgit v1.2.3 From ef3149eb3ddb7f9125e11c90f8330e371b55cffd Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Wed, 22 Jun 2016 20:43:30 +0100 Subject: staging: iio: accel: fix error check sca3000_read_ctrl_reg() returns a negative number on failure, check for this instead of zero. Signed-off-by: Luis de Bethencourt Cc: Signed-off-by: Jonathan Cameron --- drivers/staging/iio/accel/sca3000_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c index a8f533af9eca..ec12181822e6 100644 --- a/drivers/staging/iio/accel/sca3000_core.c +++ b/drivers/staging/iio/accel/sca3000_core.c @@ -594,7 +594,7 @@ static ssize_t sca3000_read_frequency(struct device *dev, goto error_ret_mut; ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL); mutex_unlock(&st->lock); - if (ret) + if (ret < 0) goto error_ret; val = ret; if (base_freq > 0) -- cgit v1.2.3 From 0c1f91b98552da49d9d8eed32b3132a58d2f4598 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 17 Jun 2016 15:22:24 +0200 Subject: iio: accel: kxsd9: fix the usage of spi_w8r8() These two spi_w8r8() calls return a value with is used by the code following the error check. The dubious use was caused by a cleanup patch. Fixes: d34dbee8ac8e ("staging:iio:accel:kxsd9 cleanup and conversion to iio_chan_spec.") Signed-off-by: Linus Walleij Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/kxsd9.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c index 923f56598d4b..3a9f106787d2 100644 --- a/drivers/iio/accel/kxsd9.c +++ b/drivers/iio/accel/kxsd9.c @@ -81,7 +81,7 @@ static int kxsd9_write_scale(struct iio_dev *indio_dev, int micro) mutex_lock(&st->buf_lock); ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C)); - if (ret) + if (ret < 0) goto error_ret; st->tx[0] = KXSD9_WRITE(KXSD9_REG_CTRL_C); st->tx[1] = (ret & ~KXSD9_FS_MASK) | i; @@ -163,7 +163,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev, break; case IIO_CHAN_INFO_SCALE: ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C)); - if (ret) + if (ret < 0) goto error_ret; *val2 = kxsd9_micro_scales[ret & KXSD9_FS_MASK]; ret = IIO_VAL_INT_PLUS_MICRO; -- cgit v1.2.3 From 6b7f4e25f3309f106a5c7ff42c8231494cf285d3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Jun 2016 13:53:32 +0100 Subject: iio:ad7266: Fix broken regulator error handling All regulator_get() variants return either a pointer to a regulator or an ERR_PTR() so testing for NULL makes no sense and may lead to bugs if we use NULL as a valid regulator. Fix this by using IS_ERR() as expected. Signed-off-by: Mark Brown Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7266.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c index 21e19b60e2b9..835d45db258f 100644 --- a/drivers/iio/adc/ad7266.c +++ b/drivers/iio/adc/ad7266.c @@ -397,7 +397,7 @@ static int ad7266_probe(struct spi_device *spi) st = iio_priv(indio_dev); st->reg = devm_regulator_get(&spi->dev, "vref"); - if (!IS_ERR_OR_NULL(st->reg)) { + if (!IS_ERR(st->reg)) { ret = regulator_enable(st->reg); if (ret) return ret; -- cgit v1.2.3 From e5511c816e5ac4909bdd38e85ac344e2b9b8e984 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Jun 2016 13:53:33 +0100 Subject: iio:ad7266: Fix support for optional regulators The ad7266 driver attempts to support deciding between the use of internal and external power supplies by checking to see if an error is returned when requesting the regulator. This doesn't work with the current code since the driver uses a normal regulator_get() which is for non-optional supplies and so assumes that if a regulator is not provided by the platform then this is a bug in the platform integration and so substitutes a dummy regulator. Use regulator_get_optional() instead which indicates to the framework that the regulator may be absent and provides a dummy regulator instead. Signed-off-by: Mark Brown Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7266.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c index 835d45db258f..655b36b4e9cb 100644 --- a/drivers/iio/adc/ad7266.c +++ b/drivers/iio/adc/ad7266.c @@ -396,7 +396,7 @@ static int ad7266_probe(struct spi_device *spi) st = iio_priv(indio_dev); - st->reg = devm_regulator_get(&spi->dev, "vref"); + st->reg = devm_regulator_get_optional(&spi->dev, "vref"); if (!IS_ERR(st->reg)) { ret = regulator_enable(st->reg); if (ret) -- cgit v1.2.3 From 68b356eb3d9f5e38910fb62e22a78e2a18d544ae Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Jun 2016 13:53:34 +0100 Subject: iio:ad7266: Fix probe deferral for vref Currently the ad7266 driver treats any failure to get vref as though the regulator were not present but this means that if probe deferral is triggered the driver will act as though the regulator were not present. Instead only use the internal reference if we explicitly got -ENODEV which is what is returned for absent regulators. Signed-off-by: Mark Brown Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7266.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c index 655b36b4e9cb..2123f0ac2e2a 100644 --- a/drivers/iio/adc/ad7266.c +++ b/drivers/iio/adc/ad7266.c @@ -408,6 +408,9 @@ static int ad7266_probe(struct spi_device *spi) st->vref_mv = ret / 1000; } else { + /* Any other error indicates that the regulator does exist */ + if (PTR_ERR(st->reg) != -ENODEV) + return PTR_ERR(st->reg); /* Use internal reference */ st->vref_mv = 2500; } -- cgit v1.2.3 From 5353ed8deedee9e5acb9f896e9032158f5d998de Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 20 Jun 2016 15:40:27 +0100 Subject: devpts: fix null pointer dereference on failed memory allocation An ENOMEM when creating a pair tty in tty_ldisc_setup causes a null pointer dereference in devpts_kill_index because tty->link->driver_data is NULL. The oops was triggered with the pty stressor in stress-ng when in a low memory condition. tty_init_dev tries to clean up a tty_ldisc_setup ENOMEM error by calling release_tty, however, this ultimately tries to clean up the NULL pair'd tty in pty_unix98_remove, triggering the Oops. Add check to pty_unix98_remove to only clean up fsi if it is not NULL. Ooops: [ 23.020961] Oops: 0000 [#1] SMP [ 23.020976] Modules linked in: ppdev snd_hda_codec_generic snd_hda_intel snd_hda_codec parport_pc snd_hda_core snd_hwdep parport snd_pcm input_leds joydev snd_timer serio_raw snd soundcore i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel qxl aes_x86_64 ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect psmouse sysimgblt floppy fb_sys_fops drm pata_acpi jitterentropy_rng drbg ansi_cprng [ 23.020978] CPU: 0 PID: 1452 Comm: stress-ng-pty Not tainted 4.7.0-rc4+ #2 [ 23.020978] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 23.020979] task: ffff88007ba30000 ti: ffff880078ea8000 task.ti: ffff880078ea8000 [ 23.020981] RIP: 0010:[] [] ida_remove+0x1f/0x120 [ 23.020981] RSP: 0018:ffff880078eabb60 EFLAGS: 00010a03 [ 23.020982] RAX: 4444444444444567 RBX: 0000000000000000 RCX: 000000000000001f [ 23.020982] RDX: 000000000000014c RSI: 000000000000026f RDI: 0000000000000000 [ 23.020982] RBP: ffff880078eabb70 R08: 0000000000000004 R09: 0000000000000036 [ 23.020983] R10: 000000000000026f R11: 0000000000000000 R12: 000000000000026f [ 23.020983] R13: 000000000000026f R14: ffff88007c944b40 R15: 000000000000026f [ 23.020984] FS: 00007f9a2f3cc700(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 23.020984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.020985] CR2: 0000000000000010 CR3: 000000006c81b000 CR4: 00000000001406f0 [ 23.020988] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.020988] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.020988] Stack: [ 23.020989] 0000000000000000 000000000000026f ffff880078eabb90 ffffffff812a5a99 [ 23.020990] 0000000000000000 00000000fffffff4 ffff880078eabba8 ffffffff814f9cbe [ 23.020991] ffff88007965c800 ffff880078eabbc8 ffffffff814eef43 fffffffffffffff4 [ 23.020991] Call Trace: [ 23.021000] [] devpts_kill_index+0x29/0x50 [ 23.021002] [] pty_unix98_remove+0x2e/0x50 [ 23.021006] [] release_tty+0xb3/0x1b0 [ 23.021007] [] tty_init_dev+0xd4/0x1c0 [ 23.021011] [] ptmx_open+0xae/0x190 [ 23.021013] [] chrdev_open+0xbf/0x1b0 [ 23.021015] [] do_dentry_open+0x203/0x310 [ 23.021016] [] ? cdev_put+0x30/0x30 [ 23.021017] [] vfs_open+0x54/0x80 [ 23.021018] [] ? may_open+0x8c/0x100 [ 23.021019] [] path_openat+0x2eb/0x1440 [ 23.021020] [] ? putname+0x54/0x60 [ 23.021022] [] ? n_tty_ioctl_helper+0x27/0x100 [ 23.021023] [] do_filp_open+0x91/0x100 [ 23.021024] [] ? getname_flags+0x56/0x1f0 [ 23.021026] [] ? __alloc_fd+0x46/0x190 [ 23.021027] [] do_sys_open+0x124/0x210 [ 23.021028] [] SyS_open+0x1e/0x20 [ 23.021035] [] entry_SYSCALL_64_fastpath+0x1e/0xa8 [ 23.021044] Code: 63 28 45 31 e4 eb dd 0f 1f 44 00 00 55 4c 63 d6 48 ba 89 88 88 88 88 88 88 88 4c 89 d0 b9 1f 00 00 00 48 f7 e2 48 89 e5 41 54 53 <8b> 47 10 48 89 fb 8d 3c c5 00 00 00 00 48 c1 ea 09 b8 01 00 00 [ 23.021045] RIP [] ida_remove+0x1f/0x120 [ 23.021045] RSP [ 23.021046] CR2: 0000000000000010 Signed-off-by: Colin Ian King Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/pty.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index f856c4544eea..51e0d32883ba 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -667,8 +667,11 @@ static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) fsi = tty->driver_data; else fsi = tty->link->driver_data; - devpts_kill_index(fsi, tty->index); - devpts_release(fsi); + + if (fsi) { + devpts_kill_index(fsi, tty->index); + devpts_release(fsi); + } } static const struct tty_operations ptm_unix98_ops = { -- cgit v1.2.3 From a37503bc387ce2434106d4bf4870bd73081c7355 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Wed, 22 Jun 2016 12:40:50 -0500 Subject: net: smsc911x: Fix bug where PHY interrupts are overwritten by 0 By default, mdiobus_alloc() sets the PHYs to polling mode, but a pointer size memcpy means that a couple IRQs end up being overwritten with a value of 0. This means that PHY_POLL is disabled and results in unpredictable behavior depending on the PHY's location on the MDIO bus. Remove that memcpy and the now unused phy_irq member to force the SMSC911x PHYs into polling mode 100% of the time. Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core") Signed-off-by: Jeremy Linton Reviewed-by: Andrew Lunn Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 8af25563f627..b5ab5e120bca 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -116,7 +116,6 @@ struct smsc911x_data { struct phy_device *phy_dev; struct mii_bus *mii_bus; - int phy_irq[PHY_MAX_ADDR]; unsigned int using_extphy; int last_duplex; int last_carrier; @@ -1073,7 +1072,6 @@ static int smsc911x_mii_init(struct platform_device *pdev, pdata->mii_bus->priv = pdata; pdata->mii_bus->read = smsc911x_mii_read; pdata->mii_bus->write = smsc911x_mii_write; - memcpy(pdata->mii_bus->irq, pdata->phy_irq, sizeof(pdata->mii_bus)); pdata->mii_bus->parent = &pdev->dev; -- cgit v1.2.3 From 583248e6620a4726093295e2d6785fcbc2e86428 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 1 Jun 2016 12:10:08 +0100 Subject: iommu/iova: Disable preemption around use of this_cpu_ptr() Between acquiring the this_cpu_ptr() and using it, ideally we don't want to be preempted and work on another CPU's private data. this_cpu_ptr() checks whether or not preemption is disable, and get_cpu_ptr() provides a convenient wrapper for operating on the cpu ptr inside a preemption disabled critical section (which currently is provided by the spinlock). [ 167.997877] BUG: using smp_processor_id() in preemptible [00000000] code: usb-storage/216 [ 167.997940] caller is debug_smp_processor_id+0x17/0x20 [ 167.997945] CPU: 7 PID: 216 Comm: usb-storage Tainted: G U 4.7.0-rc1-gfxbench-RO_Patchwork_1057+ #1 [ 167.997948] Hardware name: Hewlett-Packard HP Pro 3500 Series/2ABF, BIOS 8.11 10/24/2012 [ 167.997951] 0000000000000000 ffff880118b7f9c8 ffffffff8140dca5 0000000000000007 [ 167.997958] ffffffff81a3a7e9 ffff880118b7f9f8 ffffffff8142a927 0000000000000000 [ 167.997965] ffff8800d499ed58 0000000000000001 00000000000fffff ffff880118b7fa08 [ 167.997971] Call Trace: [ 167.997977] [] dump_stack+0x67/0x92 [ 167.997981] [] check_preemption_disabled+0xd7/0xe0 [ 167.997985] [] debug_smp_processor_id+0x17/0x20 [ 167.997990] [] alloc_iova_fast+0xb7/0x210 [ 167.997994] [] intel_alloc_iova+0x7f/0xd0 [ 167.997998] [] intel_map_sg+0xbd/0x240 [ 167.998002] [] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998009] [] usb_hcd_map_urb_for_dma+0x4b9/0x5a0 [ 167.998013] [] usb_hcd_submit_urb+0xe9/0xaa0 [ 167.998017] [] ? mark_held_locks+0x6f/0xa0 [ 167.998022] [] ? __raw_spin_lock_init+0x1c/0x50 [ 167.998025] [] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998028] [] usb_submit_urb+0x3f3/0x5a0 [ 167.998032] [] ? trace_hardirqs_on_caller+0x122/0x1b0 [ 167.998035] [] usb_sg_wait+0x67/0x150 [ 167.998039] [] usb_stor_bulk_transfer_sglist.part.3+0x82/0xd0 [ 167.998042] [] usb_stor_bulk_srb+0x4c/0x60 [ 167.998045] [] usb_stor_Bulk_transport+0x17e/0x420 [ 167.998049] [] usb_stor_invoke_transport+0x242/0x540 [ 167.998052] [] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998058] [] usb_stor_transparent_scsi_command+0x9/0x10 [ 167.998061] [] usb_stor_control_thread+0x158/0x260 [ 167.998064] [] ? fill_inquiry_response+0x20/0x20 [ 167.998067] [] ? fill_inquiry_response+0x20/0x20 [ 167.998071] [] kthread+0xea/0x100 [ 167.998078] [] ret_from_fork+0x1f/0x40 [ 167.998081] [] ? kthread_create_on_node+0x1f0/0x1f0 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96293 Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Joerg Roedel Cc: iommu@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org Fixes: 9257b4a206fc ('iommu/iova: introduce per-cpu caching to iova allocation') Signed-off-by: Joerg Roedel --- drivers/iommu/iova.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c index ba764a0835d3..e23001bfcfee 100644 --- a/drivers/iommu/iova.c +++ b/drivers/iommu/iova.c @@ -420,8 +420,10 @@ retry: /* Try replenishing IOVAs by flushing rcache. */ flushed_rcache = true; + preempt_disable(); for_each_online_cpu(cpu) free_cpu_cached_iovas(cpu, iovad); + preempt_enable(); goto retry; } @@ -749,7 +751,7 @@ static bool __iova_rcache_insert(struct iova_domain *iovad, bool can_insert = false; unsigned long flags; - cpu_rcache = this_cpu_ptr(rcache->cpu_rcaches); + cpu_rcache = get_cpu_ptr(rcache->cpu_rcaches); spin_lock_irqsave(&cpu_rcache->lock, flags); if (!iova_magazine_full(cpu_rcache->loaded)) { @@ -779,6 +781,7 @@ static bool __iova_rcache_insert(struct iova_domain *iovad, iova_magazine_push(cpu_rcache->loaded, iova_pfn); spin_unlock_irqrestore(&cpu_rcache->lock, flags); + put_cpu_ptr(rcache->cpu_rcaches); if (mag_to_free) { iova_magazine_free_pfns(mag_to_free, iovad); @@ -812,7 +815,7 @@ static unsigned long __iova_rcache_get(struct iova_rcache *rcache, bool has_pfn = false; unsigned long flags; - cpu_rcache = this_cpu_ptr(rcache->cpu_rcaches); + cpu_rcache = get_cpu_ptr(rcache->cpu_rcaches); spin_lock_irqsave(&cpu_rcache->lock, flags); if (!iova_magazine_empty(cpu_rcache->loaded)) { @@ -834,6 +837,7 @@ static unsigned long __iova_rcache_get(struct iova_rcache *rcache, iova_pfn = iova_magazine_pop(cpu_rcache->loaded, limit_pfn); spin_unlock_irqrestore(&cpu_rcache->lock, flags); + put_cpu_ptr(rcache->cpu_rcaches); return iova_pfn; } -- cgit v1.2.3 From 3bd4f9112f87a9c65fe6e817272806167f0bc9ed Mon Sep 17 00:00:00 2001 From: Jan Niehusmann Date: Mon, 6 Jun 2016 14:20:11 +0200 Subject: iommu/vt-d: Fix overflow of iommu->domains array The valid range of 'did' in get_iommu_domain(*iommu, did) is 0..cap_ndoms(iommu->cap), so don't exceed that range in free_all_cpu_cached_iovas(). The user-visible impact of the out-of-bounds access is the machine hanging on suspend-to-ram. It is, in fact, a kernel panic, but due to already suspended devices, that's often not visible to the user. Fixes: 22e2f9fa63b0 ("iommu/vt-d: Use per-cpu IOVA caching") Signed-off-by: Jan Niehusmann Tested-By: Marius Vlad Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 10700945994e..cfe410eedaf0 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -4607,7 +4607,7 @@ static void free_all_cpu_cached_iovas(unsigned int cpu) if (!iommu) continue; - for (did = 0; did < 0xffff; did++) { + for (did = 0; did < cap_ndoms(iommu->cap); did++) { domain = get_iommu_domain(iommu, did); if (!domain) -- cgit v1.2.3 From 6082ee72e9d89e80a664418be06f47d728243e85 Mon Sep 17 00:00:00 2001 From: Nicolas Iooss Date: Sun, 26 Jun 2016 10:33:29 +0200 Subject: iommu/amd: Initialize devid variable before using it Commit 2a0cb4e2d423 ("iommu/amd: Add new map for storing IVHD dev entry type HID") added a call to DUMP_printk in init_iommu_from_acpi() which used the value of devid before this variable was initialized. Fixes: 2a0cb4e2d423 ('iommu/amd: Add new map for storing IVHD dev entry type HID') Signed-off-by: Nicolas Iooss Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index 9e0034196e10..d091defc3426 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -1107,13 +1107,13 @@ static int __init init_iommu_from_acpi(struct amd_iommu *iommu, break; } + devid = e->devid; DUMP_printk(" DEV_ACPI_HID(%s[%s])\t\tdevid: %02x:%02x.%x\n", hid, uid, PCI_BUS_NUM(devid), PCI_SLOT(devid), PCI_FUNC(devid)); - devid = e->devid; flags = e->flags; ret = add_acpi_hid_device(hid, uid, &devid, false); -- cgit v1.2.3 From ab2a4bf83902c170d29ba130a8abb5f9d90559e1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 27 Jun 2016 10:23:10 -0400 Subject: USB: don't free bandwidth_mutex too early The USB core contains a bug that can show up when a USB-3 host controller is removed. If the primary (USB-2) hcd structure is released before the shared (USB-3) hcd, the core will try to do a double-free of the common bandwidth_mutex. The problem was described in graphical form by Chung-Geol Kim, who first reported it: ================================================= At *remove USB(3.0) Storage sequence <1> --> <5> ((Problem Case)) ================================================= VOLD ------------------------------------|------------ (uevent) ________|_________ |<1> | |dwc3_otg_sm_work | |usb_put_hcd | |peer_hcd(kref=2)| |__________________| ________|_________ |<2> | |New USB BUS #2 | | | |peer_hcd(kref=1) | | | --(Link)-bandXX_mutex| | |__________________| | ___________________ | |<3> | | |dwc3_otg_sm_work | | |usb_put_hcd | | |primary_hcd(kref=1)| | |___________________| | _________|_________ | |<4> | | |New USB BUS #1 | | |hcd_release | | |primary_hcd(kref=0)| | | | | |bandXX_mutex(free) |<- |___________________| (( VOLD )) ______|___________ |<5> | | SCSI | |usb_put_hcd | |peer_hcd(kref=0) | |*hcd_release | |bandXX_mutex(free*)|<- double free |__________________| ================================================= This happens because hcd_release() frees the bandwidth_mutex whenever it sees a primary hcd being released (which is not a very good idea in any case), but in the course of releasing the primary hcd, it changes the pointers in the shared hcd in such a way that the shared hcd will appear to be primary when it gets released. This patch fixes the problem by changing hcd_release() so that it deallocates the bandwidth_mutex only when the _last_ hcd structure referencing it is released. The patch also removes an unnecessary test, so that when an hcd is released, both the shared_hcd and primary_hcd pointers in the hcd's peer will be cleared. Signed-off-by: Alan Stern Reported-by: Chung-Geol Kim Tested-by: Chung-Geol Kim CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 34b837ae1ed7..d2e3f655c26f 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2598,26 +2598,23 @@ EXPORT_SYMBOL_GPL(usb_create_hcd); * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is * deallocated. * - * Make sure to only deallocate the bandwidth_mutex when the primary HCD is - * freed. When hcd_release() is called for either hcd in a peer set - * invalidate the peer's ->shared_hcd and ->primary_hcd pointers to - * block new peering attempts + * Make sure to deallocate the bandwidth_mutex only when the last HCD is + * freed. When hcd_release() is called for either hcd in a peer set, + * invalidate the peer's ->shared_hcd and ->primary_hcd pointers. */ static void hcd_release(struct kref *kref) { struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref); mutex_lock(&usb_port_peer_mutex); - if (usb_hcd_is_primary_hcd(hcd)) { - kfree(hcd->address0_mutex); - kfree(hcd->bandwidth_mutex); - } if (hcd->shared_hcd) { struct usb_hcd *peer = hcd->shared_hcd; peer->shared_hcd = NULL; - if (peer->primary_hcd == hcd) - peer->primary_hcd = NULL; + peer->primary_hcd = NULL; + } else { + kfree(hcd->address0_mutex); + kfree(hcd->bandwidth_mutex); } mutex_unlock(&usb_port_peer_mutex); kfree(hcd); -- cgit v1.2.3 From 5ab666e09541e64ce2fd73411c3b5b9e4ad334b1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 27 Jun 2016 23:47:15 +0200 Subject: intel_pstate: Do not clear utilization update hooks on policy changes intel_pstate_set_policy() is invoked by the cpufreq core during driver initialization, on changes of policy attributes (minimim and maximum frequency, for example) via sysfs and via CPU notifications from the platform firmware. On some platforms the latter may occur relatively often. Commit bb6ab52f2bef (intel_pstate: Do not set utilization update hook too early) made intel_pstate_set_policy() clear the CPU's utilization update hook before updating the policy attributes for it (and set the hook again after doind that), but that involves invoking synchronize_sched() and adds overhead to the CPU notifications mentioned above and to the sched-RCU handling in general. That extra overhead is arguably not necessary, because updating policy attributes when the CPU's utilization update hook is active should not lead to any adverse effects, so drop the clearing of the hook from intel_pstate_set_policy() and make it check if the hook has been set already when attempting to set it. Fixes: bb6ab52f2bef (intel_pstate: Do not set utilization update hook too early) Reported-by: Jisheng Zhang Tested-by: Jisheng Zhang Tested-by: Doug Smythies Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index fe9dc17ea873..1fa1a32928d7 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -1400,6 +1400,9 @@ static void intel_pstate_set_update_util_hook(unsigned int cpu_num) { struct cpudata *cpu = all_cpu_data[cpu_num]; + if (cpu->update_util_set) + return; + /* Prevent intel_pstate_update_util() from using stale data. */ cpu->sample.time = 0; cpufreq_add_update_util_hook(cpu_num, &cpu->update_util, @@ -1440,8 +1443,6 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) if (!policy->cpuinfo.max_freq) return -ENODEV; - intel_pstate_clear_update_util_hook(policy->cpu); - pr_debug("set_policy cpuinfo.max %u policy->max %u\n", policy->cpuinfo.max_freq, policy->max); -- cgit v1.2.3 From ca5eda5d3db6026080cff267459625c87c43e9ab Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 27 Jun 2016 14:50:13 +0900 Subject: cpufreq: dt: call of_node_put() before error out If of_match_node() fails, this init function bails out without calling of_node_put(). Also change of_node_put(of_root) to of_node_put(np); both of them hold the same pointer, but it seems better to call of_node_put() against the node returned by of_find_node_by_path(). Signed-off-by: Masahiro Yamada Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-dt-platdev.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index 3646b143bbf5..0bb44d5b5df4 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -79,15 +79,16 @@ static const struct of_device_id machines[] __initconst = { static int __init cpufreq_dt_platdev_init(void) { struct device_node *np = of_find_node_by_path("/"); + const struct of_device_id *match; if (!np) return -ENODEV; - if (!of_match_node(machines, np)) + match = of_match_node(machines, np); + of_node_put(np); + if (!match) return -ENODEV; - of_node_put(of_root); - return PTR_ERR_OR_ZERO(platform_device_register_simple("cpufreq-dt", -1, NULL, 0)); } -- cgit v1.2.3 From 742c87bf27d3b715820da6f8a81d6357adbf18f8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 28 Jun 2016 03:29:29 +0200 Subject: cpufreq: Avoid false-positive WARN_ON()s in cpufreq_update_policy() CPU notifications from the firmware coming in when cpufreq is suspended cause cpufreq_update_current_freq() to return 0 which triggers the WARN_ON() in cpufreq_update_policy() for no reason. Avoid that by checking cpufreq_suspended before calling cpufreq_update_current_freq(). Fixes: c9d9c929e674 (cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set) Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar Cc: 4.6+ # 4.6+ --- drivers/cpufreq/cpufreq.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 9009295f5134..5617c7087d77 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -2261,6 +2261,10 @@ int cpufreq_update_policy(unsigned int cpu) * -> ask driver for current freq and notify governors about a change */ if (cpufreq_driver->get && !cpufreq_driver->setpolicy) { + if (cpufreq_suspended) { + ret = -EAGAIN; + goto unlock; + } new_policy.cur = cpufreq_update_current_freq(policy); if (WARN_ON(!new_policy.cur)) { ret = -EIO; -- cgit v1.2.3 From 0622cab0341cac6b30da177b0faa39fae0680e71 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Thu, 23 Jun 2016 14:20:51 -0700 Subject: bonding: fix 802.3ad aggregator reselection Since commit 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated."), the logic in bonding to handle selection between multiple aggregators has not functioned. This affects only configurations wherein the bonding slaves connect to two discrete aggregators (e.g., two independent switches, each with LACP enabled), thus creating two separate aggregation groups within a single bond. The cause is a change in 7bb11dc9f59d to no longer set AD_PORT_BEGIN on a port after a link state change, which would cause the port to be reselected for attachment to an aggregator as if were newly added to the bond. We cannot restore the prior behavior, as it contradicts IEEE 802.1AX 5.4.12, which requires ports that "become inoperable" (lose carrier, setting port_enabled=false as per 802.1AX 5.4.7) to remain selected (i.e., assigned to the aggregator). As the port now remains selected, the aggregator selection logic is not invoked. A side effect of this change is that aggregators in bonding will now contain ports that are link down. The aggregator selection logic does not currently handle this situation correctly, causing incorrect aggregator selection. This patch makes two changes to repair the aggregator selection logic in bonding to function as documented and within the confines of the standard: First, the aggregator selection and related logic now utilizes the number of active ports per aggregator, not the number of selected ports (as some selected ports may be down). The ad_select "bandwidth" and "count" options only consider ports that are link up. Second, on any carrier state change of any slave, the aggregator selection logic is explicitly called to insure the correct aggregator is active. Reported-by: Veli-Matti Lintu Fixes: 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated.") Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 64 +++++++++++++++++++++++++++++------------- 1 file changed, 45 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index b9304a295f86..ca81f46ea1aa 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -657,6 +657,20 @@ static void __set_agg_ports_ready(struct aggregator *aggregator, int val) } } +static int __agg_active_ports(struct aggregator *agg) +{ + struct port *port; + int active = 0; + + for (port = agg->lag_ports; port; + port = port->next_port_in_aggregator) { + if (port->is_enabled) + active++; + } + + return active; +} + /** * __get_agg_bandwidth - get the total bandwidth of an aggregator * @aggregator: the aggregator we're looking at @@ -664,39 +678,40 @@ static void __set_agg_ports_ready(struct aggregator *aggregator, int val) */ static u32 __get_agg_bandwidth(struct aggregator *aggregator) { + int nports = __agg_active_ports(aggregator); u32 bandwidth = 0; - if (aggregator->num_of_ports) { + if (nports) { switch (__get_link_speed(aggregator->lag_ports)) { case AD_LINK_SPEED_1MBPS: - bandwidth = aggregator->num_of_ports; + bandwidth = nports; break; case AD_LINK_SPEED_10MBPS: - bandwidth = aggregator->num_of_ports * 10; + bandwidth = nports * 10; break; case AD_LINK_SPEED_100MBPS: - bandwidth = aggregator->num_of_ports * 100; + bandwidth = nports * 100; break; case AD_LINK_SPEED_1000MBPS: - bandwidth = aggregator->num_of_ports * 1000; + bandwidth = nports * 1000; break; case AD_LINK_SPEED_2500MBPS: - bandwidth = aggregator->num_of_ports * 2500; + bandwidth = nports * 2500; break; case AD_LINK_SPEED_10000MBPS: - bandwidth = aggregator->num_of_ports * 10000; + bandwidth = nports * 10000; break; case AD_LINK_SPEED_20000MBPS: - bandwidth = aggregator->num_of_ports * 20000; + bandwidth = nports * 20000; break; case AD_LINK_SPEED_40000MBPS: - bandwidth = aggregator->num_of_ports * 40000; + bandwidth = nports * 40000; break; case AD_LINK_SPEED_56000MBPS: - bandwidth = aggregator->num_of_ports * 56000; + bandwidth = nports * 56000; break; case AD_LINK_SPEED_100000MBPS: - bandwidth = aggregator->num_of_ports * 100000; + bandwidth = nports * 100000; break; default: bandwidth = 0; /* to silence the compiler */ @@ -1530,10 +1545,10 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best, switch (__get_agg_selection_mode(curr->lag_ports)) { case BOND_AD_COUNT: - if (curr->num_of_ports > best->num_of_ports) + if (__agg_active_ports(curr) > __agg_active_ports(best)) return curr; - if (curr->num_of_ports < best->num_of_ports) + if (__agg_active_ports(curr) < __agg_active_ports(best)) return best; /*FALLTHROUGH*/ @@ -1561,8 +1576,14 @@ static int agg_device_up(const struct aggregator *agg) if (!port) return 0; - return netif_running(port->slave->dev) && - netif_carrier_ok(port->slave->dev); + for (port = agg->lag_ports; port; + port = port->next_port_in_aggregator) { + if (netif_running(port->slave->dev) && + netif_carrier_ok(port->slave->dev)) + return 1; + } + + return 0; } /** @@ -1610,7 +1631,7 @@ static void ad_agg_selection_logic(struct aggregator *agg, agg->is_active = 0; - if (agg->num_of_ports && agg_device_up(agg)) + if (__agg_active_ports(agg) && agg_device_up(agg)) best = ad_agg_selection_test(best, agg); } @@ -1622,7 +1643,7 @@ static void ad_agg_selection_logic(struct aggregator *agg, * answering partner. */ if (active && active->lag_ports && - active->lag_ports->is_enabled && + __agg_active_ports(active) && (__agg_has_partner(active) || (!__agg_has_partner(active) && !__agg_has_partner(best)))) { @@ -2133,7 +2154,7 @@ void bond_3ad_unbind_slave(struct slave *slave) else temp_aggregator->lag_ports = temp_port->next_port_in_aggregator; temp_aggregator->num_of_ports--; - if (temp_aggregator->num_of_ports == 0) { + if (__agg_active_ports(temp_aggregator) == 0) { select_new_active_agg = temp_aggregator->is_active; ad_clear_agg(temp_aggregator); if (select_new_active_agg) { @@ -2432,7 +2453,9 @@ void bond_3ad_adapter_speed_duplex_changed(struct slave *slave) */ void bond_3ad_handle_link_change(struct slave *slave, char link) { + struct aggregator *agg; struct port *port; + bool dummy; port = &(SLAVE_AD_INFO(slave)->port); @@ -2459,6 +2482,9 @@ void bond_3ad_handle_link_change(struct slave *slave, char link) port->is_enabled = false; ad_update_actor_keys(port, true); } + agg = __get_first_agg(port); + ad_agg_selection_logic(agg, &dummy); + netdev_dbg(slave->bond->dev, "Port %d changed link status to %s\n", port->actor_port_number, link == BOND_LINK_UP ? "UP" : "DOWN"); @@ -2499,7 +2525,7 @@ int bond_3ad_set_carrier(struct bonding *bond) active = __get_active_agg(&(SLAVE_AD_INFO(first_slave)->aggregator)); if (active) { /* are enough slaves available to consider link up? */ - if (active->num_of_ports < bond->params.min_links) { + if (__agg_active_ports(active) < bond->params.min_links) { if (netif_carrier_ok(bond->dev)) { netif_carrier_off(bond->dev); goto out; -- cgit v1.2.3 From d2b13233879ca1268a1c027d4573109e5a777811 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 23 Jun 2016 14:23:12 -0700 Subject: net: bgmac: Fix SOF bit checking We are checking for the Start of Frame bit in the ctl1 word, while this bit is set in the ctl0 word instead. Read the ctl0 word and update the check to verify that. Fixes: 9cde94506eac ("bgmac: implement scatter/gather support") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index ee5f431ab32a..70926c611f25 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -267,15 +267,16 @@ static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring) while (ring->start != ring->end) { int slot_idx = ring->start % BGMAC_TX_RING_SLOTS; struct bgmac_slot_info *slot = &ring->slots[slot_idx]; - u32 ctl1; + u32 ctl0, ctl1; int len; if (slot_idx == empty_slot) break; + ctl0 = le32_to_cpu(ring->cpu_base[slot_idx].ctl0); ctl1 = le32_to_cpu(ring->cpu_base[slot_idx].ctl1); len = ctl1 & BGMAC_DESC_CTL1_LEN; - if (ctl1 & BGMAC_DESC_CTL0_SOF) + if (ctl0 & BGMAC_DESC_CTL0_SOF) /* Unmap no longer used buffer */ dma_unmap_single(dma_dev, slot->dma_addr, len, DMA_TO_DEVICE); -- cgit v1.2.3 From c3897f2a69e54dd113fc9abd2daf872e5b495798 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 23 Jun 2016 14:25:32 -0700 Subject: net: bgmac: Start transmit queue in bgmac_open The driver does not start the transmit queue in bgmac_open(). If the queue was stopped prior to closing then re-opening the interface, we would never be able to wake-up again. Fixes: dd4544f05469 ("bgmac: driver for GBit MAC core on BCMA bus") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 70926c611f25..85cd07f72ffb 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -1314,6 +1314,9 @@ static int bgmac_open(struct net_device *net_dev) phy_start(bgmac->phy_dev); netif_carrier_on(net_dev); + + netif_start_queue(net_dev); + return 0; } -- cgit v1.2.3 From 3894396e64994f31c3ef5c7e6f63dded0593e567 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 23 Jun 2016 14:25:33 -0700 Subject: net: bgmac: Remove superflous netif_carrier_on() bgmac_open() calls phy_start() to initialize the PHY state machine, which will set the interface's carrier state accordingly, no need to force that as this could be conflicting with the PHY state determined by PHYLIB. Fixes: dd4544f05469 ("bgmac: driver for GBit MAC core on BCMA bus") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 85cd07f72ffb..a6333d38ecc0 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -1313,8 +1313,6 @@ static int bgmac_open(struct net_device *net_dev) phy_start(bgmac->phy_dev); - netif_carrier_on(net_dev); - netif_start_queue(net_dev); return 0; -- cgit v1.2.3 From f299a02d5f13c4deb52c1a7ddf2b42630fe6294a Mon Sep 17 00:00:00 2001 From: Wang Sheng-Hui Date: Fri, 24 Jun 2016 08:52:11 +0800 Subject: net/mlx5: use mlx5_buf_alloc_node instead of mlx5_buf_alloc in mlx5_wq_ll_create Commit 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") introduced mlx5_*_alloc_node() but missed changing some calling and warn messages. This patch introduces 2 changes: * Use mlx5_buf_alloc_node() instead of mlx5_buf_alloc() in mlx5_wq_ll_create() * Update the failure warn messages with _node postfix for mlx5_*_alloc function names Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") Signed-off-by: Wang Sheng-Hui Acked-By: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/wq.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/wq.c b/drivers/net/ethernet/mellanox/mlx5/core/wq.c index ce21ee5b2357..821a087c7ae2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/wq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/wq.c @@ -75,14 +75,14 @@ int mlx5_wq_cyc_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param, err = mlx5_db_alloc_node(mdev, &wq_ctrl->db, param->db_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_db_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_db_alloc_node() failed, %d\n", err); return err; } err = mlx5_buf_alloc_node(mdev, mlx5_wq_cyc_get_byte_size(wq), &wq_ctrl->buf, param->buf_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_buf_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_buf_alloc_node() failed, %d\n", err); goto err_db_free; } @@ -111,14 +111,14 @@ int mlx5_cqwq_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param, err = mlx5_db_alloc_node(mdev, &wq_ctrl->db, param->db_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_db_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_db_alloc_node() failed, %d\n", err); return err; } err = mlx5_buf_alloc_node(mdev, mlx5_cqwq_get_byte_size(wq), &wq_ctrl->buf, param->buf_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_buf_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_buf_alloc_node() failed, %d\n", err); goto err_db_free; } @@ -148,13 +148,14 @@ int mlx5_wq_ll_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param, err = mlx5_db_alloc_node(mdev, &wq_ctrl->db, param->db_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_db_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_db_alloc_node() failed, %d\n", err); return err; } - err = mlx5_buf_alloc(mdev, mlx5_wq_ll_get_byte_size(wq), &wq_ctrl->buf); + err = mlx5_buf_alloc_node(mdev, mlx5_wq_ll_get_byte_size(wq), + &wq_ctrl->buf, param->buf_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_buf_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_buf_alloc_node() failed, %d\n", err); goto err_db_free; } -- cgit v1.2.3 From 62630ea768869beeb1e514b0bf5607a0c9b93d12 Mon Sep 17 00:00:00 2001 From: Allen Hung Date: Thu, 23 Jun 2016 16:31:29 +0800 Subject: Revert "HID: multitouch: enable palm rejection if device implements confidence usage" This reverts commit 25a84db15b3f ("HID: multitouch: enable palm rejection if device implements confidence usage") The commit enables palm rejection for Win8 Precision Touchpad devices but the quirk MT_QUIRK_VALID_IS_CONFIDENCE it is using is not working very properly. This quirk is originally designed for some WIn7 touchscreens. Use of this for a Win8 Precision Touchpad will cause unexpected pointer jumping problem. Cc: stable@vger.kernel.org # v4.5+ Reviewed-by: Benjamin Tissoires Tested-by: Andy Lutomirski # XPS 13 9350, BIOS 1.4.3 Signed-off-by: Allen Hung Signed-off-by: Jiri Kosina --- drivers/hid/hid-multitouch.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 95b7d61d9910..4ef700688657 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -502,11 +502,6 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi, mt_store_field(usage, td, hi); return 1; case HID_DG_CONFIDENCE: - if (cls->name == MT_CLS_WIN_8 && - field->application == HID_DG_TOUCHPAD) { - cls->quirks &= ~MT_QUIRK_ALWAYS_VALID; - cls->quirks |= MT_QUIRK_VALID_IS_CONFIDENCE; - } mt_store_field(usage, td, hi); return 1; case HID_DG_TIPSWITCH: -- cgit v1.2.3 From 6dd2e27a103d716921cc4a1a96a9adc0a8e3ab57 Mon Sep 17 00:00:00 2001 From: Allen Hung Date: Thu, 23 Jun 2016 16:31:30 +0800 Subject: HID: multitouch: enable palm rejection for Windows Precision Touchpad The usage Confidence is mandary to Windows Precision Touchpad devices. If it is examined in input_mapping on a WIndows Precision Touchpad, a new add quirk MT_QUIRK_CONFIDENCE desgned for such devices will be applied to the device. A touch with the confidence bit is not set is determined as invalid. Tested on Dell XPS13 9343 Cc: stable@vger.kernel.org # v4.5+ Reviewed-by: Benjamin Tissoires Tested-by: Andy Lutomirski # XPS 13 9350, BIOS 1.4.3 Signed-off-by: Allen Hung Signed-off-by: Jiri Kosina --- drivers/hid/hid-multitouch.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 4ef700688657..fb6f1f447279 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -61,6 +61,7 @@ MODULE_LICENSE("GPL"); #define MT_QUIRK_ALWAYS_VALID (1 << 4) #define MT_QUIRK_VALID_IS_INRANGE (1 << 5) #define MT_QUIRK_VALID_IS_CONFIDENCE (1 << 6) +#define MT_QUIRK_CONFIDENCE (1 << 7) #define MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE (1 << 8) #define MT_QUIRK_NO_AREA (1 << 9) #define MT_QUIRK_IGNORE_DUPLICATES (1 << 10) @@ -78,6 +79,7 @@ struct mt_slot { __s32 contactid; /* the device ContactID assigned to this slot */ bool touch_state; /* is the touch valid? */ bool inrange_state; /* is the finger in proximity of the sensor? */ + bool confidence_state; /* is the touch made by a finger? */ }; struct mt_class { @@ -502,6 +504,9 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi, mt_store_field(usage, td, hi); return 1; case HID_DG_CONFIDENCE: + if (cls->name == MT_CLS_WIN_8 && + field->application == HID_DG_TOUCHPAD) + cls->quirks |= MT_QUIRK_CONFIDENCE; mt_store_field(usage, td, hi); return 1; case HID_DG_TIPSWITCH: @@ -614,6 +619,7 @@ static void mt_complete_slot(struct mt_device *td, struct input_dev *input) return; if (td->curvalid || (td->mtclass.quirks & MT_QUIRK_ALWAYS_VALID)) { + int active; int slotnum = mt_compute_slot(td, input); struct mt_slot *s = &td->curdata; struct input_mt *mt = input->mt; @@ -628,10 +634,14 @@ static void mt_complete_slot(struct mt_device *td, struct input_dev *input) return; } + if (!(td->mtclass.quirks & MT_QUIRK_CONFIDENCE)) + s->confidence_state = 1; + active = (s->touch_state || s->inrange_state) && + s->confidence_state; + input_mt_slot(input, slotnum); - input_mt_report_slot_state(input, MT_TOOL_FINGER, - s->touch_state || s->inrange_state); - if (s->touch_state || s->inrange_state) { + input_mt_report_slot_state(input, MT_TOOL_FINGER, active); + if (active) { /* this finger is in proximity of the sensor */ int wide = (s->w > s->h); /* divided by two to match visual scale of touch */ @@ -696,6 +706,8 @@ static void mt_process_mt_event(struct hid_device *hid, struct hid_field *field, td->curdata.touch_state = value; break; case HID_DG_CONFIDENCE: + if (quirks & MT_QUIRK_CONFIDENCE) + td->curdata.confidence_state = value; if (quirks & MT_QUIRK_VALID_IS_CONFIDENCE) td->curvalid = value; break; -- cgit v1.2.3 From ab8ed951080e8f59b1da4ea10ac7c05ba24a3cbd Mon Sep 17 00:00:00 2001 From: Aaron Campbell Date: Fri, 24 Jun 2016 10:05:32 -0300 Subject: connector: fix out-of-order cn_proc netlink message delivery The proc connector messages include a sequence number, allowing userspace programs to detect lost messages. However, performing this detection is currently more difficult than necessary, since netlink messages can be delivered to the application out-of-order. To fix this, leave pre-emption disabled during cn_netlink_send(), and use GFP_NOWAIT. The following was written as a test case. Building the kernel w/ make -j32 proved a reliable way to generate out-of-order cn_proc messages. int main(int argc, char *argv[]) { static uint32_t last_seq[CPU_SETSIZE], seq; int cpu, fd; struct sockaddr_nl sa; struct __attribute__((aligned(NLMSG_ALIGNTO))) { struct nlmsghdr nl_hdr; struct __attribute__((__packed__)) { struct cn_msg cn_msg; struct proc_event cn_proc; }; } rmsg; struct __attribute__((aligned(NLMSG_ALIGNTO))) { struct nlmsghdr nl_hdr; struct __attribute__((__packed__)) { struct cn_msg cn_msg; enum proc_cn_mcast_op cn_mcast; }; } smsg; fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR); if (fd < 0) { perror("socket"); } sa.nl_family = AF_NETLINK; sa.nl_groups = CN_IDX_PROC; sa.nl_pid = getpid(); if (bind(fd, (struct sockaddr *)&sa, sizeof(sa)) < 0) { perror("bind"); } memset(&smsg, 0, sizeof(smsg)); smsg.nl_hdr.nlmsg_len = sizeof(smsg); smsg.nl_hdr.nlmsg_pid = getpid(); smsg.nl_hdr.nlmsg_type = NLMSG_DONE; smsg.cn_msg.id.idx = CN_IDX_PROC; smsg.cn_msg.id.val = CN_VAL_PROC; smsg.cn_msg.len = sizeof(enum proc_cn_mcast_op); smsg.cn_mcast = PROC_CN_MCAST_LISTEN; if (send(fd, &smsg, sizeof(smsg), 0) != sizeof(smsg)) { perror("send"); } while (recv(fd, &rmsg, sizeof(rmsg), 0) == sizeof(rmsg)) { cpu = rmsg.cn_proc.cpu; if (cpu < 0) { continue; } seq = rmsg.cn_msg.seq; if ((last_seq[cpu] != 0) && (seq != last_seq[cpu] + 1)) { printf("out-of-order seq=%d on cpu=%d\n", seq, cpu); } last_seq[cpu] = seq; } /* NOTREACHED */ perror("recv"); return -1; } Signed-off-by: Aaron Campbell Signed-off-by: David S. Miller --- drivers/connector/cn_proc.c | 43 ++++++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c index 15d06fcf0b50..b02f9c606e0b 100644 --- a/drivers/connector/cn_proc.c +++ b/drivers/connector/cn_proc.c @@ -56,11 +56,21 @@ static struct cb_id cn_proc_event_id = { CN_IDX_PROC, CN_VAL_PROC }; /* proc_event_counts is used as the sequence number of the netlink message */ static DEFINE_PER_CPU(__u32, proc_event_counts) = { 0 }; -static inline void get_seq(__u32 *ts, int *cpu) +static inline void send_msg(struct cn_msg *msg) { preempt_disable(); - *ts = __this_cpu_inc_return(proc_event_counts) - 1; - *cpu = smp_processor_id(); + + msg->seq = __this_cpu_inc_return(proc_event_counts) - 1; + ((struct proc_event *)msg->data)->cpu = smp_processor_id(); + + /* + * Preemption remains disabled during send to ensure the messages are + * ordered according to their sequence numbers. + * + * If cn_netlink_send() fails, the data is not sent. + */ + cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_NOWAIT); + preempt_enable(); } @@ -77,7 +87,6 @@ void proc_fork_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_FORK; rcu_read_lock(); @@ -92,8 +101,7 @@ void proc_fork_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - /* If cn_netlink_send() failed, the data is not sent */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_exec_connector(struct task_struct *task) @@ -108,7 +116,6 @@ void proc_exec_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_EXEC; ev->event_data.exec.process_pid = task->pid; @@ -118,7 +125,7 @@ void proc_exec_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_id_connector(struct task_struct *task, int which_id) @@ -150,14 +157,13 @@ void proc_id_connector(struct task_struct *task, int which_id) return; } rcu_read_unlock(); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_sid_connector(struct task_struct *task) @@ -172,7 +178,6 @@ void proc_sid_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_SID; ev->event_data.sid.process_pid = task->pid; @@ -182,7 +187,7 @@ void proc_sid_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_ptrace_connector(struct task_struct *task, int ptrace_id) @@ -197,7 +202,6 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_PTRACE; ev->event_data.ptrace.process_pid = task->pid; @@ -215,7 +219,7 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_comm_connector(struct task_struct *task) @@ -230,7 +234,6 @@ void proc_comm_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_COMM; ev->event_data.comm.process_pid = task->pid; @@ -241,7 +244,7 @@ void proc_comm_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_coredump_connector(struct task_struct *task) @@ -256,7 +259,6 @@ void proc_coredump_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_COREDUMP; ev->event_data.coredump.process_pid = task->pid; @@ -266,7 +268,7 @@ void proc_coredump_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_exit_connector(struct task_struct *task) @@ -281,7 +283,6 @@ void proc_exit_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_EXIT; ev->event_data.exit.process_pid = task->pid; @@ -293,7 +294,7 @@ void proc_exit_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } /* @@ -325,7 +326,7 @@ static void cn_proc_ack(int err, int rcvd_seq, int rcvd_ack) msg->ack = rcvd_ack + 1; msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } /** -- cgit v1.2.3 From 69fc58a57e56bf5e39b48809aefffdaa1b04c945 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 24 Jun 2016 16:25:24 -0700 Subject: net: phy: Manage fixed PHY address space using IDA If we have a system which uses fixed PHY devices and calls fixed_phy_register() then fixed_phy_unregister() we can exhaust the number of fixed PHYs available after a while, since we keep incrementing the variable phy_fixed_addr, but we never decrement it. This patch fixes that by converting the fixed PHY allocation to using IDA, which takes care of the allocation/dealloaction of the PHY addresses for us. Fixes: a75951217472 ("net: phy: extend fixed driver with fixed_phy_register()") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/fixed_phy.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c index 2d2e4339f0df..9ec7f7353434 100644 --- a/drivers/net/phy/fixed_phy.c +++ b/drivers/net/phy/fixed_phy.c @@ -23,6 +23,7 @@ #include #include #include +#include #define MII_REGS_NUM 29 @@ -286,6 +287,8 @@ err_regs: } EXPORT_SYMBOL_GPL(fixed_phy_add); +static DEFINE_IDA(phy_fixed_ida); + static void fixed_phy_del(int phy_addr) { struct fixed_mdio_bus *fmb = &platform_fmb; @@ -297,14 +300,12 @@ static void fixed_phy_del(int phy_addr) if (gpio_is_valid(fp->link_gpio)) gpio_free(fp->link_gpio); kfree(fp); + ida_simple_remove(&phy_fixed_ida, phy_addr); return; } } } -static int phy_fixed_addr; -static DEFINE_SPINLOCK(phy_fixed_addr_lock); - struct phy_device *fixed_phy_register(unsigned int irq, struct fixed_phy_status *status, int link_gpio, @@ -319,17 +320,15 @@ struct phy_device *fixed_phy_register(unsigned int irq, return ERR_PTR(-EPROBE_DEFER); /* Get the next available PHY address, up to PHY_MAX_ADDR */ - spin_lock(&phy_fixed_addr_lock); - if (phy_fixed_addr == PHY_MAX_ADDR) { - spin_unlock(&phy_fixed_addr_lock); - return ERR_PTR(-ENOSPC); - } - phy_addr = phy_fixed_addr++; - spin_unlock(&phy_fixed_addr_lock); + phy_addr = ida_simple_get(&phy_fixed_ida, 0, PHY_MAX_ADDR, GFP_KERNEL); + if (phy_addr < 0) + return ERR_PTR(phy_addr); ret = fixed_phy_add(irq, phy_addr, status, link_gpio); - if (ret < 0) + if (ret < 0) { + ida_simple_remove(&phy_fixed_ida, phy_addr); return ERR_PTR(ret); + } phy = get_phy_device(fmb->mii_bus, phy_addr, false); if (IS_ERR(phy)) { @@ -434,6 +433,7 @@ static void __exit fixed_mdio_bus_exit(void) list_del(&fp->node); kfree(fp); } + ida_destroy(&phy_fixed_ida); } module_exit(fixed_mdio_bus_exit); -- cgit v1.2.3 From 3ec0a0f10ceb77c78f540ded1d13bf0cf7f89a07 Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Mon, 27 Jun 2016 13:09:59 +0530 Subject: net: marvell: Add separate config ANEG function for Marvell 88E1111 Marvell 88E1111 currently uses the generic marvell config ANEG function. This function has a sequence accessing Page 5 and Register 31, both of which are not defined or reserved for this PHY. Hence this patch adds a new config ANEG function for Marvell 88E1111 without these erroneous accesses. Signed-off-by: Harini Katakam Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 44 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 79ccc11facc3..ec2c1eee6405 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -285,6 +285,48 @@ static int marvell_config_aneg(struct phy_device *phydev) return 0; } +static int m88e1111_config_aneg(struct phy_device *phydev) +{ + int err; + + /* The Marvell PHY has an errata which requires + * that certain registers get written in order + * to restart autonegotiation + */ + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + + err = marvell_set_polarity(phydev, phydev->mdix); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL, + MII_M1111_PHY_LED_DIRECT); + if (err < 0) + return err; + + err = genphy_config_aneg(phydev); + if (err < 0) + return err; + + if (phydev->autoneg != AUTONEG_ENABLE) { + int bmcr; + + /* A write to speed/duplex bits (that is performed by + * genphy_config_aneg() call above) must be followed by + * a software reset. Otherwise, the write has no effect. + */ + bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + + err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET); + if (err < 0) + return err; + } + + return 0; +} + #ifdef CONFIG_OF_MDIO /* * Set and/or override some configuration registers based on the @@ -1175,7 +1217,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1111_config_init, - .config_aneg = &marvell_config_aneg, + .config_aneg = &m88e1111_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, -- cgit v1.2.3 From 664a84d2c77cbff2945ed7f96d08afbba42b6293 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Fri, 13 May 2016 20:53:56 +0300 Subject: drm/i915: Refresh cached DP port register value on resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During hibernation the cached DP port register value will be left with whatever value we have there when we create the hibernation image. Currently that means the port (and eDP PLL) will be off in the cached value. However when we resume there is no guarantee that the value in the actual register will match the cached value. If i915 isn't loaded in the kernel that loads the hibernation image, the port may well be on (eg. left on by the BIOS). The encoder state readout does the right thing in this case and updates our encoder state to reflect the actual hardware state. However the post-resume modeset will then use the stale cached port register value in intel_dp_link_down() and potentially confuse the hardware. This was caught by the following assert WARNING: CPU: 3 PID: 5288 at ../drivers/gpu/drm/i915/intel_dp.c:2184 assert_edp_pll+0x99/0xa0 [i915] eDP PLL state assertion failure (expected on, current off) on account of the eDP PLL getting prematurely turned off when shutting down the port, since the DP_PLL_ENABLE bit wasn't set in the cached register value. Presumably I introduced this problem in commit 6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup") as before that we didn't update the cached value after shuttting the port down. That's assuming the port got enabled at least once prior to hibernating. If that didn't happen then the cached value would still have been totally out of sync with reality (eg. first boot w/o eDP on, then hibernate, and then resume with eDP on). So, let's fix this properly and refresh the cached register value from the hardware register during resume. DDI platforms shouldn't use the cached value during port disable at least, so shouldn't have this particular issue. They might still have issues if we skip the initial modeset and then try to retrain the link or something. But untangling this DP vs. DDI mess is a bigger topic, so let's jut punt on DDI for now. Cc: Jani Nikula Cc: stable@vger.kernel.org Fixes: 6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1463162036-27931-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak (cherry picked from commit 64989ca4b27acb026b6496ec21e43bee66f86a5b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 79cf2d5f5a20..49c582d9eb5a 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4899,13 +4899,15 @@ static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp) void intel_dp_encoder_reset(struct drm_encoder *encoder) { - struct intel_dp *intel_dp; + struct drm_i915_private *dev_priv = to_i915(encoder->dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + + if (!HAS_DDI(dev_priv)) + intel_dp->DP = I915_READ(intel_dp->output_reg); if (to_intel_encoder(encoder)->type != INTEL_OUTPUT_EDP) return; - intel_dp = enc_to_intel_dp(encoder); - pps_lock(intel_dp); /* -- cgit v1.2.3 From ea12e2a0cad62f6d634da62e7bf50ffe077de13b Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:30 +0300 Subject: drm/i915/bxt: Avoid early timeout during PLL enable Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. I noticed this via the PLL locking timing out incorrectly, with this fix I couldn't reproduce the problem. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-2-git-send-email-imre.deak@intel.com (cherry picked from commit 0b786e41c73956126f6297764459021deef8aba7) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dpll_mgr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c index baf6f5584cbd..58f60b27837e 100644 --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c @@ -1377,8 +1377,8 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv, I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); POSTING_READ(BXT_PORT_PLL_ENABLE(port)); - if (wait_for_atomic_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & - PORT_PLL_LOCK), 200)) + if (wait_for_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & PORT_PLL_LOCK), + 200)) DRM_ERROR("PLL %d not locked\n", port); /* -- cgit v1.2.3 From 11f6145791775ce41b8993fd29e19eb53ef0ff14 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:31 +0300 Subject: drm/i915/lpt: Avoid early timeout during FDI PHY reset Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-3-git-send-email-imre.deak@intel.com (cherry picked from commit cf3598c23cd09d5f063fa8c12fe9ddd5a352d3d5) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 56a1637c864f..a164ea44f668 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8447,16 +8447,16 @@ static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv) tmp |= FDI_MPHY_IOSFSB_RESET_CTL; I915_WRITE(SOUTH_CHICKEN2, tmp); - if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) & - FDI_MPHY_IOSFSB_RESET_STATUS, 100)) + if (wait_for_us(I915_READ(SOUTH_CHICKEN2) & + FDI_MPHY_IOSFSB_RESET_STATUS, 100)) DRM_ERROR("FDI mPHY reset assert timeout\n"); tmp = I915_READ(SOUTH_CHICKEN2); tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL; I915_WRITE(SOUTH_CHICKEN2, tmp); - if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) & - FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100)) + if (wait_for_us((I915_READ(SOUTH_CHICKEN2) & + FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100)) DRM_ERROR("FDI mPHY reset de-assert timeout\n"); } -- cgit v1.2.3 From fa7c13e5b1e2076b0ec716ed584ab76f9e65b7a6 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:32 +0300 Subject: drm/i915/hsw: Avoid early timeout during LCPLL disable/restore Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-4-git-send-email-imre.deak@intel.com (cherry picked from commit f53dd63f1119a98a16d1a5a7cb3277a2f1ff483d) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a164ea44f668..04452cf3eae8 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9440,8 +9440,8 @@ static void hsw_disable_lcpll(struct drm_i915_private *dev_priv, val |= LCPLL_CD_SOURCE_FCLK; I915_WRITE(LCPLL_CTL, val); - if (wait_for_atomic_us(I915_READ(LCPLL_CTL) & - LCPLL_CD_SOURCE_FCLK_DONE, 1)) + if (wait_for_us(I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE, 1)) DRM_ERROR("Switching to FCLK failed\n"); val = I915_READ(LCPLL_CTL); @@ -9514,8 +9514,8 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) val &= ~LCPLL_CD_SOURCE_FCLK; I915_WRITE(LCPLL_CTL, val); - if (wait_for_atomic_us((I915_READ(LCPLL_CTL) & - LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) + if (wait_for_us((I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) DRM_ERROR("Switching back to LCPLL failed\n"); } -- cgit v1.2.3 From ba34a65324259082dc6d2924cb82d562db1c6a6b Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:33 +0300 Subject: drm/i915: Avoid early timeout during AUX transfers Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. Due to the relatively long 10ms timeout, probably this didn't cause any real problems, but fix it in any case for consistency. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-5-git-send-email-imre.deak@intel.com (cherry picked from commit 713a6b668932213247b394559bc229cd0fec2777) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 49c582d9eb5a..40745e38d438 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -663,7 +663,7 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, msecs_to_jiffies_timeout(10)); else - done = wait_for_atomic(C, 10) == 0; + done = wait_for(C, 10) == 0; if (!done) DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n", has_aux_irq); -- cgit v1.2.3 From 5be1ea899da4f11de92897d2ea706e0820609b9e Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 27 Jun 2016 12:08:32 +0300 Subject: net/mlx5: Update command strings Add command string for MODIFY_FLOW_TABLE which is used by the driver. Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index dcd2df6518de..0b4986268cc9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -545,6 +545,7 @@ const char *mlx5_command_str(int command) MLX5_COMMAND_STR_CASE(ALLOC_FLOW_COUNTER); MLX5_COMMAND_STR_CASE(DEALLOC_FLOW_COUNTER); MLX5_COMMAND_STR_CASE(QUERY_FLOW_COUNTER); + MLX5_COMMAND_STR_CASE(MODIFY_FLOW_TABLE); default: return "unknown command opcode"; } } -- cgit v1.2.3 From 7092fe866907f4f243122ab388cbf0e77305afaa Mon Sep 17 00:00:00 2001 From: Majd Dibbiny Date: Mon, 27 Jun 2016 12:08:33 +0300 Subject: net/mlx5: Add ConnectX-5 PCIe 4.0 to list of supported devices Add the upcoming ConnectX-5 PCIe 4.0 device to the list of supported devices by the mlx5 driver. Signed-off-by: Majd Dibbiny Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index a19b59348dd6..c65f4a13e17e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1508,8 +1508,9 @@ static const struct pci_device_id mlx5_core_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x1014), MLX5_PCI_DEV_IS_VF}, /* ConnectX-4 VF */ { PCI_VDEVICE(MELLANOX, 0x1015) }, /* ConnectX-4LX */ { PCI_VDEVICE(MELLANOX, 0x1016), MLX5_PCI_DEV_IS_VF}, /* ConnectX-4LX VF */ - { PCI_VDEVICE(MELLANOX, 0x1017) }, /* ConnectX-5 */ + { PCI_VDEVICE(MELLANOX, 0x1017) }, /* ConnectX-5, PCIe 3.0 */ { PCI_VDEVICE(MELLANOX, 0x1018), MLX5_PCI_DEV_IS_VF}, /* ConnectX-5 VF */ + { PCI_VDEVICE(MELLANOX, 0x1019) }, /* ConnectX-5, PCIe 4.0 */ { 0, } }; -- cgit v1.2.3 From e0f46eb9f64ca2e97d242b6e02b8ae2c7fe6dc56 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 27 Jun 2016 12:08:34 +0300 Subject: net/mlx5e: Change enum to better reflect usage Change MLX5E_STATE_ASYNC_EVENTS_ENABLE to MLX5E_STATE_ASYNC_EVENTS_ENABLED since it represent a state and not an operation. Fixes: acff797cd1874 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 2 +- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index e8a6c3325b39..baa991a23475 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -401,7 +401,7 @@ enum mlx5e_traffic_types { }; enum { - MLX5E_STATE_ASYNC_EVENTS_ENABLE, + MLX5E_STATE_ASYNC_EVENTS_ENABLED, MLX5E_STATE_OPENED, MLX5E_STATE_DESTROYING, }; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index f5c8d5db25a8..4383f8c737e5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -244,7 +244,7 @@ static void mlx5e_async_event(struct mlx5_core_dev *mdev, void *vpriv, { struct mlx5e_priv *priv = vpriv; - if (!test_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLE, &priv->state)) + if (!test_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLED, &priv->state)) return; switch (event) { @@ -260,12 +260,12 @@ static void mlx5e_async_event(struct mlx5_core_dev *mdev, void *vpriv, static void mlx5e_enable_async_events(struct mlx5e_priv *priv) { - set_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLE, &priv->state); + set_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLED, &priv->state); } static void mlx5e_disable_async_events(struct mlx5e_priv *priv) { - clear_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLE, &priv->state); + clear_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLED, &priv->state); synchronize_irq(mlx5_get_msix_vec(priv->mdev, MLX5_EQ_VEC_ASYNC)); } -- cgit v1.2.3 From fd4782c21359cfd52af4c3180a2bb6bad55c1eba Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 27 Jun 2016 12:08:35 +0300 Subject: net/mlx5e: Check for BlueFlame capability before allocating SQ uar Previous to this patch mapping was always set to write combining without checking whether BlueFlame is supported in the device. Fixes: 0ba422410bbf ('net/mlx5: Fix global UAR mapping') Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 4383f8c737e5..793d7a1f92b5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -580,7 +580,7 @@ static int mlx5e_create_sq(struct mlx5e_channel *c, void *sqc_wq = MLX5_ADDR_OF(sqc, sqc, wq); int err; - err = mlx5_alloc_map_uar(mdev, &sq->uar, true); + err = mlx5_alloc_map_uar(mdev, &sq->uar, !!MLX5_CAP_GEN(mdev, bf)); if (err) return err; -- cgit v1.2.3 From 9ceec359e4ebdbbfd35375203c5bd06d602225f7 Mon Sep 17 00:00:00 2001 From: Matthew Finlay Date: Mon, 27 Jun 2016 12:08:36 +0300 Subject: net/mlx5e: Prevent adding the same vxlan port Do not allow the same vxlan udp port to be added to the device more than once. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Matthew Finlay Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/vxlan.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c index f2fd1ef16da7..05de77267d58 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c @@ -105,6 +105,9 @@ static void mlx5e_vxlan_add_port(struct work_struct *work) struct mlx5e_vxlan *vxlan; int err; + if (mlx5e_vxlan_lookup_port(priv, port)) + goto free_work; + if (mlx5e_vxlan_core_add_port_cmd(priv->mdev, port)) goto free_work; -- cgit v1.2.3 From ed80ec4c179d1f44cc1b36c7a102353ae6103793 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 27 Jun 2016 12:08:37 +0300 Subject: net/mlx5e: Fix number of PFC counters reported to ethtool Number of PFC counters used to count only number of priorities with PFC enabled, but each priority has more than one counter, hence the need to multiply it by the number of PFC counters per priority. Fixes: cf678570d5a1 ('net/mlx5e: Add per priority group to PPort counters') Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index fc7dcc03b1de..c709d41c4b70 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -184,7 +184,9 @@ static unsigned long mlx5e_query_pfc_combined(struct mlx5e_priv *priv) #define MLX5E_NUM_SQ_STATS(priv) \ (NUM_SQ_STATS * priv->params.num_channels * priv->params.num_tc * \ test_bit(MLX5E_STATE_OPENED, &priv->state)) -#define MLX5E_NUM_PFC_COUNTERS(priv) hweight8(mlx5e_query_pfc_combined(priv)) +#define MLX5E_NUM_PFC_COUNTERS(priv) \ + (hweight8(mlx5e_query_pfc_combined(priv)) * \ + NUM_PPORT_PER_PRIO_PFC_COUNTERS) static int mlx5e_get_sset_count(struct net_device *dev, int sset) { -- cgit v1.2.3 From bfe6d8d1d433cbd5513a93132695e6dbdd79e6f2 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 27 Jun 2016 12:08:38 +0300 Subject: net/mlx5e: Reorganize ethtool statistics Categorize and reorganize ethtool statistics counters by renaming to "rx_*" and "tx_*" and removing redundant and duplicated counters, this way they are easier to grasp and more user friendly. Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 30 ++- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 27 ++- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 4 +- drivers/net/ethernet/mellanox/mlx5/core/en_stats.h | 228 +++++++++------------ drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 4 +- 5 files changed, 130 insertions(+), 163 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index c709d41c4b70..e667a870e0c2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -213,42 +213,41 @@ static void mlx5e_fill_stats_strings(struct mlx5e_priv *priv, uint8_t *data) /* SW counters */ for (i = 0; i < NUM_SW_COUNTERS; i++) - strcpy(data + (idx++) * ETH_GSTRING_LEN, sw_stats_desc[i].name); + strcpy(data + (idx++) * ETH_GSTRING_LEN, sw_stats_desc[i].format); /* Q counters */ for (i = 0; i < MLX5E_NUM_Q_CNTRS(priv); i++) - strcpy(data + (idx++) * ETH_GSTRING_LEN, q_stats_desc[i].name); + strcpy(data + (idx++) * ETH_GSTRING_LEN, q_stats_desc[i].format); /* VPORT counters */ for (i = 0; i < NUM_VPORT_COUNTERS; i++) strcpy(data + (idx++) * ETH_GSTRING_LEN, - vport_stats_desc[i].name); + vport_stats_desc[i].format); /* PPORT counters */ for (i = 0; i < NUM_PPORT_802_3_COUNTERS; i++) strcpy(data + (idx++) * ETH_GSTRING_LEN, - pport_802_3_stats_desc[i].name); + pport_802_3_stats_desc[i].format); for (i = 0; i < NUM_PPORT_2863_COUNTERS; i++) strcpy(data + (idx++) * ETH_GSTRING_LEN, - pport_2863_stats_desc[i].name); + pport_2863_stats_desc[i].format); for (i = 0; i < NUM_PPORT_2819_COUNTERS; i++) strcpy(data + (idx++) * ETH_GSTRING_LEN, - pport_2819_stats_desc[i].name); + pport_2819_stats_desc[i].format); for (prio = 0; prio < NUM_PPORT_PRIO; prio++) { for (i = 0; i < NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS; i++) - sprintf(data + (idx++) * ETH_GSTRING_LEN, "prio%d_%s", - prio, - pport_per_prio_traffic_stats_desc[i].name); + sprintf(data + (idx++) * ETH_GSTRING_LEN, + pport_per_prio_traffic_stats_desc[i].format, prio); } pfc_combined = mlx5e_query_pfc_combined(priv); for_each_set_bit(prio, &pfc_combined, NUM_PPORT_PRIO) { for (i = 0; i < NUM_PPORT_PER_PRIO_PFC_COUNTERS; i++) { - sprintf(data + (idx++) * ETH_GSTRING_LEN, "prio%d_%s", - prio, pport_per_prio_pfc_stats_desc[i].name); + sprintf(data + (idx++) * ETH_GSTRING_LEN, + pport_per_prio_pfc_stats_desc[i].format, prio); } } @@ -258,16 +257,15 @@ static void mlx5e_fill_stats_strings(struct mlx5e_priv *priv, uint8_t *data) /* per channel counters */ for (i = 0; i < priv->params.num_channels; i++) for (j = 0; j < NUM_RQ_STATS; j++) - sprintf(data + (idx++) * ETH_GSTRING_LEN, "rx%d_%s", i, - rq_stats_desc[j].name); + sprintf(data + (idx++) * ETH_GSTRING_LEN, + rq_stats_desc[j].format, i); for (tc = 0; tc < priv->params.num_tc; tc++) for (i = 0; i < priv->params.num_channels; i++) for (j = 0; j < NUM_SQ_STATS; j++) sprintf(data + (idx++) * ETH_GSTRING_LEN, - "tx%d_%s", - priv->channeltc_to_txq_map[i][tc], - sq_stats_desc[j].name); + sq_stats_desc[j].format, + priv->channeltc_to_txq_map[i][tc]); } static void mlx5e_get_strings(struct net_device *dev, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 793d7a1f92b5..cb6defd71fc1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -105,11 +105,11 @@ static void mlx5e_update_sw_counters(struct mlx5e_priv *priv) s->rx_packets += rq_stats->packets; s->rx_bytes += rq_stats->bytes; - s->lro_packets += rq_stats->lro_packets; - s->lro_bytes += rq_stats->lro_bytes; + s->rx_lro_packets += rq_stats->lro_packets; + s->rx_lro_bytes += rq_stats->lro_bytes; s->rx_csum_none += rq_stats->csum_none; - s->rx_csum_sw += rq_stats->csum_sw; - s->rx_csum_inner += rq_stats->csum_inner; + s->rx_csum_complete += rq_stats->csum_complete; + s->rx_csum_unnecessary_inner += rq_stats->csum_unnecessary_inner; s->rx_wqe_err += rq_stats->wqe_err; s->rx_mpwqe_filler += rq_stats->mpwqe_filler; s->rx_mpwqe_frag += rq_stats->mpwqe_frag; @@ -122,24 +122,23 @@ static void mlx5e_update_sw_counters(struct mlx5e_priv *priv) s->tx_packets += sq_stats->packets; s->tx_bytes += sq_stats->bytes; - s->tso_packets += sq_stats->tso_packets; - s->tso_bytes += sq_stats->tso_bytes; - s->tso_inner_packets += sq_stats->tso_inner_packets; - s->tso_inner_bytes += sq_stats->tso_inner_bytes; + s->tx_tso_packets += sq_stats->tso_packets; + s->tx_tso_bytes += sq_stats->tso_bytes; + s->tx_tso_inner_packets += sq_stats->tso_inner_packets; + s->tx_tso_inner_bytes += sq_stats->tso_inner_bytes; s->tx_queue_stopped += sq_stats->stopped; s->tx_queue_wake += sq_stats->wake; s->tx_queue_dropped += sq_stats->dropped; - s->tx_csum_inner += sq_stats->csum_offload_inner; - tx_offload_none += sq_stats->csum_offload_none; + s->tx_csum_partial_inner += sq_stats->csum_partial_inner; + tx_offload_none += sq_stats->csum_none; } } /* Update calculated offload counters */ - s->tx_csum_offload = s->tx_packets - tx_offload_none - s->tx_csum_inner; - s->rx_csum_good = s->rx_packets - s->rx_csum_none - - s->rx_csum_sw; + s->tx_csum_partial = s->tx_packets - tx_offload_none - s->tx_csum_partial_inner; + s->rx_csum_unnecessary = s->rx_packets - s->rx_csum_none - s->rx_csum_complete; - s->link_down_events = MLX5_GET(ppcnt_reg, + s->link_down_events_phy = MLX5_GET(ppcnt_reg, priv->stats.pport.phy_counters, counter_set.phys_layer_cntrs.link_down_events); } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index bd947704b59c..022acc2e8922 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -689,7 +689,7 @@ static inline void mlx5e_handle_csum(struct net_device *netdev, if (is_first_ethertype_ip(skb)) { skb->ip_summed = CHECKSUM_COMPLETE; skb->csum = csum_unfold((__force __sum16)cqe->check_sum); - rq->stats.csum_sw++; + rq->stats.csum_complete++; return; } @@ -699,7 +699,7 @@ static inline void mlx5e_handle_csum(struct net_device *netdev, if (cqe_is_tunneled(cqe)) { skb->csum_level = 1; skb->encapsulation = 1; - rq->stats.csum_inner++; + rq->stats.csum_unnecessary_inner++; } return; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h index 83bc32b25849..fcd490cc5610 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h @@ -42,9 +42,11 @@ be64_to_cpu(*(__be32 *)((char *)ptr + dsc[i].offset)) #define MLX5E_DECLARE_STAT(type, fld) #fld, offsetof(type, fld) +#define MLX5E_DECLARE_RX_STAT(type, fld) "rx%d_"#fld, offsetof(type, fld) +#define MLX5E_DECLARE_TX_STAT(type, fld) "tx%d_"#fld, offsetof(type, fld) struct counter_desc { - char name[ETH_GSTRING_LEN]; + char format[ETH_GSTRING_LEN]; int offset; /* Byte offset */ }; @@ -53,18 +55,18 @@ struct mlx5e_sw_stats { u64 rx_bytes; u64 tx_packets; u64 tx_bytes; - u64 tso_packets; - u64 tso_bytes; - u64 tso_inner_packets; - u64 tso_inner_bytes; - u64 lro_packets; - u64 lro_bytes; - u64 rx_csum_good; + u64 tx_tso_packets; + u64 tx_tso_bytes; + u64 tx_tso_inner_packets; + u64 tx_tso_inner_bytes; + u64 rx_lro_packets; + u64 rx_lro_bytes; + u64 rx_csum_unnecessary; u64 rx_csum_none; - u64 rx_csum_sw; - u64 rx_csum_inner; - u64 tx_csum_offload; - u64 tx_csum_inner; + u64 rx_csum_complete; + u64 rx_csum_unnecessary_inner; + u64 tx_csum_partial; + u64 tx_csum_partial_inner; u64 tx_queue_stopped; u64 tx_queue_wake; u64 tx_queue_dropped; @@ -76,7 +78,7 @@ struct mlx5e_sw_stats { u64 rx_cqe_compress_pkts; /* Special handling counters */ - u64 link_down_events; + u64 link_down_events_phy; }; static const struct counter_desc sw_stats_desc[] = { @@ -84,18 +86,18 @@ static const struct counter_desc sw_stats_desc[] = { { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_bytes) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_packets) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tso_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tso_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tso_inner_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tso_inner_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, lro_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, lro_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_good) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tso_packets) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tso_bytes) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tso_inner_packets) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tso_inner_bytes) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_lro_packets) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_lro_bytes) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_unnecessary) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_none) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_sw) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_inner) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_csum_offload) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_csum_inner) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_complete) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_unnecessary_inner) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_csum_partial) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_csum_partial_inner) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_queue_stopped) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_queue_wake) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_queue_dropped) }, @@ -105,7 +107,7 @@ static const struct counter_desc sw_stats_desc[] = { { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_buff_alloc_err) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_cqe_compress_blks) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_cqe_compress_pkts) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, link_down_events) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, link_down_events_phy) }, }; struct mlx5e_qcounter_stats { @@ -125,12 +127,6 @@ struct mlx5e_vport_stats { }; static const struct counter_desc vport_stats_desc[] = { - { "rx_vport_error_packets", - VPORT_COUNTER_OFF(received_errors.packets) }, - { "rx_vport_error_bytes", VPORT_COUNTER_OFF(received_errors.octets) }, - { "tx_vport_error_packets", - VPORT_COUNTER_OFF(transmit_errors.packets) }, - { "tx_vport_error_bytes", VPORT_COUNTER_OFF(transmit_errors.octets) }, { "rx_vport_unicast_packets", VPORT_COUNTER_OFF(received_eth_unicast.packets) }, { "rx_vport_unicast_bytes", @@ -192,94 +188,68 @@ struct mlx5e_pport_stats { }; static const struct counter_desc pport_802_3_stats_desc[] = { - { "frames_tx", PPORT_802_3_OFF(a_frames_transmitted_ok) }, - { "frames_rx", PPORT_802_3_OFF(a_frames_received_ok) }, - { "check_seq_err", PPORT_802_3_OFF(a_frame_check_sequence_errors) }, - { "alignment_err", PPORT_802_3_OFF(a_alignment_errors) }, - { "octets_tx", PPORT_802_3_OFF(a_octets_transmitted_ok) }, - { "octets_received", PPORT_802_3_OFF(a_octets_received_ok) }, - { "multicast_xmitted", PPORT_802_3_OFF(a_multicast_frames_xmitted_ok) }, - { "broadcast_xmitted", PPORT_802_3_OFF(a_broadcast_frames_xmitted_ok) }, - { "multicast_rx", PPORT_802_3_OFF(a_multicast_frames_received_ok) }, - { "broadcast_rx", PPORT_802_3_OFF(a_broadcast_frames_received_ok) }, - { "in_range_len_errors", PPORT_802_3_OFF(a_in_range_length_errors) }, - { "out_of_range_len", PPORT_802_3_OFF(a_out_of_range_length_field) }, - { "too_long_errors", PPORT_802_3_OFF(a_frame_too_long_errors) }, - { "symbol_err", PPORT_802_3_OFF(a_symbol_error_during_carrier) }, - { "mac_control_tx", PPORT_802_3_OFF(a_mac_control_frames_transmitted) }, - { "mac_control_rx", PPORT_802_3_OFF(a_mac_control_frames_received) }, - { "unsupported_op_rx", - PPORT_802_3_OFF(a_unsupported_opcodes_received) }, - { "pause_ctrl_rx", PPORT_802_3_OFF(a_pause_mac_ctrl_frames_received) }, - { "pause_ctrl_tx", - PPORT_802_3_OFF(a_pause_mac_ctrl_frames_transmitted) }, + { "tx_packets_phy", PPORT_802_3_OFF(a_frames_transmitted_ok) }, + { "rx_packets_phy", PPORT_802_3_OFF(a_frames_received_ok) }, + { "rx_crc_errors_phy", PPORT_802_3_OFF(a_frame_check_sequence_errors) }, + { "tx_bytes_phy", PPORT_802_3_OFF(a_octets_transmitted_ok) }, + { "rx_bytes_phy", PPORT_802_3_OFF(a_octets_received_ok) }, + { "tx_multicast_phy", PPORT_802_3_OFF(a_multicast_frames_xmitted_ok) }, + { "tx_broadcast_phy", PPORT_802_3_OFF(a_broadcast_frames_xmitted_ok) }, + { "rx_multicast_phy", PPORT_802_3_OFF(a_multicast_frames_received_ok) }, + { "rx_broadcast_phy", PPORT_802_3_OFF(a_broadcast_frames_received_ok) }, + { "rx_in_range_len_errors_phy", PPORT_802_3_OFF(a_in_range_length_errors) }, + { "rx_out_of_range_len_phy", PPORT_802_3_OFF(a_out_of_range_length_field) }, + { "rx_oversize_pkts_phy", PPORT_802_3_OFF(a_frame_too_long_errors) }, + { "rx_symbol_err_phy", PPORT_802_3_OFF(a_symbol_error_during_carrier) }, + { "tx_mac_control_phy", PPORT_802_3_OFF(a_mac_control_frames_transmitted) }, + { "rx_mac_control_phy", PPORT_802_3_OFF(a_mac_control_frames_received) }, + { "rx_unsupported_op_phy", PPORT_802_3_OFF(a_unsupported_opcodes_received) }, + { "rx_pause_ctrl_phy", PPORT_802_3_OFF(a_pause_mac_ctrl_frames_received) }, + { "tx_pause_ctrl_phy", PPORT_802_3_OFF(a_pause_mac_ctrl_frames_transmitted) }, }; static const struct counter_desc pport_2863_stats_desc[] = { - { "in_octets", PPORT_2863_OFF(if_in_octets) }, - { "in_ucast_pkts", PPORT_2863_OFF(if_in_ucast_pkts) }, - { "in_discards", PPORT_2863_OFF(if_in_discards) }, - { "in_errors", PPORT_2863_OFF(if_in_errors) }, - { "in_unknown_protos", PPORT_2863_OFF(if_in_unknown_protos) }, - { "out_octets", PPORT_2863_OFF(if_out_octets) }, - { "out_ucast_pkts", PPORT_2863_OFF(if_out_ucast_pkts) }, - { "out_discards", PPORT_2863_OFF(if_out_discards) }, - { "out_errors", PPORT_2863_OFF(if_out_errors) }, - { "in_multicast_pkts", PPORT_2863_OFF(if_in_multicast_pkts) }, - { "in_broadcast_pkts", PPORT_2863_OFF(if_in_broadcast_pkts) }, - { "out_multicast_pkts", PPORT_2863_OFF(if_out_multicast_pkts) }, - { "out_broadcast_pkts", PPORT_2863_OFF(if_out_broadcast_pkts) }, + { "rx_discards_phy", PPORT_2863_OFF(if_in_discards) }, + { "tx_discards_phy", PPORT_2863_OFF(if_out_discards) }, + { "tx_errors_phy", PPORT_2863_OFF(if_out_errors) }, }; static const struct counter_desc pport_2819_stats_desc[] = { - { "drop_events", PPORT_2819_OFF(ether_stats_drop_events) }, - { "octets", PPORT_2819_OFF(ether_stats_octets) }, - { "pkts", PPORT_2819_OFF(ether_stats_pkts) }, - { "broadcast_pkts", PPORT_2819_OFF(ether_stats_broadcast_pkts) }, - { "multicast_pkts", PPORT_2819_OFF(ether_stats_multicast_pkts) }, - { "crc_align_errors", PPORT_2819_OFF(ether_stats_crc_align_errors) }, - { "undersize_pkts", PPORT_2819_OFF(ether_stats_undersize_pkts) }, - { "oversize_pkts", PPORT_2819_OFF(ether_stats_oversize_pkts) }, - { "fragments", PPORT_2819_OFF(ether_stats_fragments) }, - { "jabbers", PPORT_2819_OFF(ether_stats_jabbers) }, - { "collisions", PPORT_2819_OFF(ether_stats_collisions) }, - { "p64octets", PPORT_2819_OFF(ether_stats_pkts64octets) }, - { "p65to127octets", PPORT_2819_OFF(ether_stats_pkts65to127octets) }, - { "p128to255octets", PPORT_2819_OFF(ether_stats_pkts128to255octets) }, - { "p256to511octets", PPORT_2819_OFF(ether_stats_pkts256to511octets) }, - { "p512to1023octets", PPORT_2819_OFF(ether_stats_pkts512to1023octets) }, - { "p1024to1518octets", - PPORT_2819_OFF(ether_stats_pkts1024to1518octets) }, - { "p1519to2047octets", - PPORT_2819_OFF(ether_stats_pkts1519to2047octets) }, - { "p2048to4095octets", - PPORT_2819_OFF(ether_stats_pkts2048to4095octets) }, - { "p4096to8191octets", - PPORT_2819_OFF(ether_stats_pkts4096to8191octets) }, - { "p8192to10239octets", - PPORT_2819_OFF(ether_stats_pkts8192to10239octets) }, + { "rx_undersize_pkts_phy", PPORT_2819_OFF(ether_stats_undersize_pkts) }, + { "rx_fragments_phy", PPORT_2819_OFF(ether_stats_fragments) }, + { "rx_jabbers_phy", PPORT_2819_OFF(ether_stats_jabbers) }, + { "rx_64_bytes_phy", PPORT_2819_OFF(ether_stats_pkts64octets) }, + { "rx_65_to_127_bytes_phy", PPORT_2819_OFF(ether_stats_pkts65to127octets) }, + { "rx_128_to_255_bytes_phy", PPORT_2819_OFF(ether_stats_pkts128to255octets) }, + { "rx_256_to_511_bytes_phy", PPORT_2819_OFF(ether_stats_pkts256to511octets) }, + { "rx_512_to_1023_bytes_phy", PPORT_2819_OFF(ether_stats_pkts512to1023octets) }, + { "rx_1024_to_1518_bytes_phy", PPORT_2819_OFF(ether_stats_pkts1024to1518octets) }, + { "rx_1519_to_2047_bytes_phy", PPORT_2819_OFF(ether_stats_pkts1519to2047octets) }, + { "rx_2048_to_4095_bytes_phy", PPORT_2819_OFF(ether_stats_pkts2048to4095octets) }, + { "rx_4096_to_8191_bytes_phy", PPORT_2819_OFF(ether_stats_pkts4096to8191octets) }, + { "rx_8192_to_10239_bytes_phy", PPORT_2819_OFF(ether_stats_pkts8192to10239octets) }, }; static const struct counter_desc pport_per_prio_traffic_stats_desc[] = { - { "rx_octets", PPORT_PER_PRIO_OFF(rx_octets) }, - { "rx_frames", PPORT_PER_PRIO_OFF(rx_frames) }, - { "tx_octets", PPORT_PER_PRIO_OFF(tx_octets) }, - { "tx_frames", PPORT_PER_PRIO_OFF(tx_frames) }, + { "rx_prio%d_bytes", PPORT_PER_PRIO_OFF(rx_octets) }, + { "rx_prio%d_packets", PPORT_PER_PRIO_OFF(rx_frames) }, + { "tx_prio%d_bytes", PPORT_PER_PRIO_OFF(tx_octets) }, + { "tx_prio%d_packets", PPORT_PER_PRIO_OFF(tx_frames) }, }; static const struct counter_desc pport_per_prio_pfc_stats_desc[] = { - { "rx_pause", PPORT_PER_PRIO_OFF(rx_pause) }, - { "rx_pause_duration", PPORT_PER_PRIO_OFF(rx_pause_duration) }, - { "tx_pause", PPORT_PER_PRIO_OFF(tx_pause) }, - { "tx_pause_duration", PPORT_PER_PRIO_OFF(tx_pause_duration) }, - { "rx_pause_transition", PPORT_PER_PRIO_OFF(rx_pause_transition) }, + { "rx_prio%d_pause", PPORT_PER_PRIO_OFF(rx_pause) }, + { "rx_prio%d_pause_duration", PPORT_PER_PRIO_OFF(rx_pause_duration) }, + { "tx_prio%d_pause", PPORT_PER_PRIO_OFF(tx_pause) }, + { "tx_prio%d_pause_duration", PPORT_PER_PRIO_OFF(tx_pause_duration) }, + { "rx_prio%d_pause_transition", PPORT_PER_PRIO_OFF(rx_pause_transition) }, }; struct mlx5e_rq_stats { u64 packets; u64 bytes; - u64 csum_sw; - u64 csum_inner; + u64 csum_complete; + u64 csum_unnecessary_inner; u64 csum_none; u64 lro_packets; u64 lro_bytes; @@ -292,19 +262,19 @@ struct mlx5e_rq_stats { }; static const struct counter_desc rq_stats_desc[] = { - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, csum_sw) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, csum_inner) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, csum_none) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, lro_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, lro_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, wqe_err) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, mpwqe_filler) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, mpwqe_frag) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, buff_alloc_err) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, cqe_compress_blks) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, cqe_compress_pkts) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, packets) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, bytes) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_complete) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_unnecessary_inner) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_none) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, lro_packets) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, lro_bytes) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, wqe_err) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, mpwqe_filler) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, mpwqe_frag) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, buff_alloc_err) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, cqe_compress_blks) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, cqe_compress_pkts) }, }; struct mlx5e_sq_stats { @@ -315,28 +285,28 @@ struct mlx5e_sq_stats { u64 tso_bytes; u64 tso_inner_packets; u64 tso_inner_bytes; - u64 csum_offload_inner; + u64 csum_partial_inner; u64 nop; /* less likely accessed in data path */ - u64 csum_offload_none; + u64 csum_none; u64 stopped; u64 wake; u64 dropped; }; static const struct counter_desc sq_stats_desc[] = { - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, tso_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, tso_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, tso_inner_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, tso_inner_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, csum_offload_inner) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, nop) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, csum_offload_none) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, stopped) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, wake) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, dropped) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, packets) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, bytes) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tso_packets) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tso_bytes) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tso_inner_packets) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tso_inner_bytes) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, csum_partial_inner) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, nop) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, csum_none) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, stopped) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, wake) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, dropped) }, }; #define NUM_SW_COUNTERS ARRAY_SIZE(sw_stats_desc) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index b000ddc29553..5a750b9cd006 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -192,12 +192,12 @@ static netdev_tx_t mlx5e_sq_xmit(struct mlx5e_sq *sq, struct sk_buff *skb) if (skb->encapsulation) { eseg->cs_flags |= MLX5_ETH_WQE_L3_INNER_CSUM | MLX5_ETH_WQE_L4_INNER_CSUM; - sq->stats.csum_offload_inner++; + sq->stats.csum_partial_inner++; } else { eseg->cs_flags |= MLX5_ETH_WQE_L4_CSUM; } } else - sq->stats.csum_offload_none++; + sq->stats.csum_none++; if (sq->cc != sq->prev_cc) { sq->prev_cc = sq->cc; -- cgit v1.2.3 From 3f4c68cfde30caa1f6d8368fd19590671411ade2 Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Mon, 27 Jun 2016 15:30:02 +0530 Subject: net: thunderx: Fix link status reporting Check for SMU RX local/remote faults along with SPU LINK status. Otherwise at times link is UP at our end but DOWN at link partner's side. Also due to an issue in BGX it's rarely seen that initialization doesn't happen properly and SMU RX reports faults with everything fine at SPU. This patch tries to reinitialize LMAC to fix it. Also fixed LMAC disable sequence to properly bring down link. Signed-off-by: Sunil Goutham Signed-off-by: Tao Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 91 +++++++++++++++-------- drivers/net/ethernet/cavium/thunder/thunder_bgx.h | 2 + 2 files changed, 62 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c index 3ed21988626b..63a39ac97d53 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c @@ -551,7 +551,9 @@ static int bgx_xaui_check_link(struct lmac *lmac) } /* Clear rcvflt bit (latching high) and read it back */ - bgx_reg_modify(bgx, lmacid, BGX_SPUX_STATUS2, SPU_STATUS2_RCVFLT); + if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) + bgx_reg_modify(bgx, lmacid, + BGX_SPUX_STATUS2, SPU_STATUS2_RCVFLT); if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) { dev_err(&bgx->pdev->dev, "Receive fault, retry training\n"); if (bgx->use_training) { @@ -570,13 +572,6 @@ static int bgx_xaui_check_link(struct lmac *lmac) return -1; } - /* Wait for MAC RX to be ready */ - if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_RX_CTL, - SMU_RX_CTL_STATUS, true)) { - dev_err(&bgx->pdev->dev, "SMU RX link not okay\n"); - return -1; - } - /* Wait for BGX RX to be idle */ if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_CTL, SMU_CTL_RX_IDLE, false)) { dev_err(&bgx->pdev->dev, "SMU RX not idle\n"); @@ -589,29 +584,30 @@ static int bgx_xaui_check_link(struct lmac *lmac) return -1; } - if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) { - dev_err(&bgx->pdev->dev, "Receive fault\n"); - return -1; - } - - /* Receive link is latching low. Force it high and verify it */ - bgx_reg_modify(bgx, lmacid, BGX_SPUX_STATUS1, SPU_STATUS1_RCV_LNK); - if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_STATUS1, - SPU_STATUS1_RCV_LNK, false)) { - dev_err(&bgx->pdev->dev, "SPU receive link down\n"); - return -1; - } - + /* Clear receive packet disable */ cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_MISC_CONTROL); cfg &= ~SPU_MISC_CTL_RX_DIS; bgx_reg_write(bgx, lmacid, BGX_SPUX_MISC_CONTROL, cfg); - return 0; + + /* Check for MAC RX faults */ + cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_RX_CTL); + /* 0 - Link is okay, 1 - Local fault, 2 - Remote fault */ + cfg &= SMU_RX_CTL_STATUS; + if (!cfg) + return 0; + + /* Rx local/remote fault seen. + * Do lmac reinit to see if condition recovers + */ + bgx_lmac_xaui_init(bgx, lmacid, bgx->lmac_type); + + return -1; } static void bgx_poll_for_link(struct work_struct *work) { struct lmac *lmac; - u64 link; + u64 spu_link, smu_link; lmac = container_of(work, struct lmac, dwork.work); @@ -621,8 +617,11 @@ static void bgx_poll_for_link(struct work_struct *work) bgx_poll_reg(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1, SPU_STATUS1_RCV_LNK, false); - link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1); - if (link & SPU_STATUS1_RCV_LNK) { + spu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1); + smu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SMUX_RX_CTL); + + if ((spu_link & SPU_STATUS1_RCV_LNK) && + !(smu_link & SMU_RX_CTL_STATUS)) { lmac->link_up = 1; if (lmac->bgx->lmac_type == BGX_MODE_XLAUI) lmac->last_speed = 40000; @@ -636,9 +635,15 @@ static void bgx_poll_for_link(struct work_struct *work) } if (lmac->last_link != lmac->link_up) { + if (lmac->link_up) { + if (bgx_xaui_check_link(lmac)) { + /* Errors, clear link_up state */ + lmac->link_up = 0; + lmac->last_speed = SPEED_UNKNOWN; + lmac->last_duplex = DUPLEX_UNKNOWN; + } + } lmac->last_link = lmac->link_up; - if (lmac->link_up) - bgx_xaui_check_link(lmac); } queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 2); @@ -710,7 +715,7 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid) static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid) { struct lmac *lmac; - u64 cmrx_cfg; + u64 cfg; lmac = &bgx->lmac[lmacid]; if (lmac->check_link) { @@ -719,9 +724,33 @@ static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid) destroy_workqueue(lmac->check_link); } - cmrx_cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); - cmrx_cfg &= ~(1 << 15); - bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cmrx_cfg); + /* Disable packet reception */ + cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); + cfg &= ~CMR_PKT_RX_EN; + bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); + + /* Give chance for Rx/Tx FIFO to get drained */ + bgx_poll_reg(bgx, lmacid, BGX_CMRX_RX_FIFO_LEN, (u64)0x1FFF, true); + bgx_poll_reg(bgx, lmacid, BGX_CMRX_TX_FIFO_LEN, (u64)0x3FFF, true); + + /* Disable packet transmission */ + cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); + cfg &= ~CMR_PKT_TX_EN; + bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); + + /* Disable serdes lanes */ + if (!lmac->is_sgmii) + bgx_reg_modify(bgx, lmacid, + BGX_SPUX_CONTROL1, SPU_CTL_LOW_POWER); + else + bgx_reg_modify(bgx, lmacid, + BGX_GMP_PCS_MRX_CTL, PCS_MRX_CTL_PWR_DN); + + /* Disable LMAC */ + cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); + cfg &= ~CMR_EN; + bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); + bgx_flush_dmac_addrs(bgx, lmacid); if ((bgx->lmac_type != BGX_MODE_XFI) && diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h index 149e179363a1..42010d2e5ddf 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h @@ -41,6 +41,7 @@ #define BGX_CMRX_RX_STAT10 0xC0 #define BGX_CMRX_RX_BP_DROP 0xC8 #define BGX_CMRX_RX_DMAC_CTL 0x0E8 +#define BGX_CMRX_RX_FIFO_LEN 0x108 #define BGX_CMR_RX_DMACX_CAM 0x200 #define RX_DMACX_CAM_EN BIT_ULL(48) #define RX_DMACX_CAM_LMACID(x) (x << 49) @@ -50,6 +51,7 @@ #define BGX_CMR_CHAN_MSK_AND 0x450 #define BGX_CMR_BIST_STATUS 0x460 #define BGX_CMR_RX_LMACS 0x468 +#define BGX_CMRX_TX_FIFO_LEN 0x518 #define BGX_CMRX_TX_STAT0 0x600 #define BGX_CMRX_TX_STAT1 0x608 #define BGX_CMRX_TX_STAT2 0x610 -- cgit v1.2.3 From 3e29adba567306504e99b8363edf2d47c19dbe1b Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Mon, 27 Jun 2016 15:30:03 +0530 Subject: net: thunderx: Fix TL4 configuration for secondary Qsets TL4 calculation for a given SQ of secondary Qsets is incorrect and goes out of bounds and also for some SQ's TL4 chosen will transmit data via a different BGX interface and not same as primary Qset's interface. This patch fixes this issue. Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nic_main.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c index 95f17f8cadac..16ed20357c5c 100644 --- a/drivers/net/ethernet/cavium/thunder/nic_main.c +++ b/drivers/net/ethernet/cavium/thunder/nic_main.c @@ -499,6 +499,7 @@ static void nic_tx_channel_cfg(struct nicpf *nic, u8 vnic, u32 rr_quantum; u8 sq_idx = sq->sq_num; u8 pqs_vnic; + int svf; if (sq->sqs_mode) pqs_vnic = nic->pqs_vf[vnic]; @@ -511,10 +512,19 @@ static void nic_tx_channel_cfg(struct nicpf *nic, u8 vnic, /* 24 bytes for FCS, IPG and preamble */ rr_quantum = ((NIC_HW_MAX_FRS + 24) / 4); - tl4 = (lmac * NIC_TL4_PER_LMAC) + (bgx * NIC_TL4_PER_BGX); + if (!sq->sqs_mode) { + tl4 = (lmac * NIC_TL4_PER_LMAC) + (bgx * NIC_TL4_PER_BGX); + } else { + for (svf = 0; svf < MAX_SQS_PER_VF; svf++) { + if (nic->vf_sqs[pqs_vnic][svf] == vnic) + break; + } + tl4 = (MAX_LMAC_PER_BGX * NIC_TL4_PER_LMAC); + tl4 += (lmac * NIC_TL4_PER_LMAC * MAX_SQS_PER_VF); + tl4 += (svf * NIC_TL4_PER_LMAC); + tl4 += (bgx * NIC_TL4_PER_BGX); + } tl4 += sq_idx; - if (sq->sqs_mode) - tl4 += vnic * 8; tl3 = tl4 / (NIC_MAX_TL4 / NIC_MAX_TL3); nic_reg_write(nic, NIC_PF_QSET_0_127_SQ_0_7_CFG2 | -- cgit v1.2.3 From 96183182ad05d1ce31b9048921c12bf4ad621eaf Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 27 Jun 2016 20:48:53 +0800 Subject: ibmvnic: fix to use list_for_each_safe() when delete items Since we will remove items off the list using list_del() we need to use a safe version of the list_for_each() macro aptly named list_for_each_safe(). Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 864cb21351a4..ecdb6854a898 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2121,7 +2121,7 @@ static void handle_error_info_rsp(union ibmvnic_crq *crq, struct ibmvnic_adapter *adapter) { struct device *dev = &adapter->vdev->dev; - struct ibmvnic_error_buff *error_buff; + struct ibmvnic_error_buff *error_buff, *tmp; unsigned long flags; bool found = false; int i; @@ -2133,7 +2133,7 @@ static void handle_error_info_rsp(union ibmvnic_crq *crq, } spin_lock_irqsave(&adapter->error_list_lock, flags); - list_for_each_entry(error_buff, &adapter->errors, list) + list_for_each_entry_safe(error_buff, tmp, &adapter->errors, list) if (error_buff->error_id == crq->request_error_rsp.error_id) { found = true; list_del(&error_buff->list); @@ -3141,14 +3141,14 @@ static void handle_request_ras_comp_num_rsp(union ibmvnic_crq *crq, static void ibmvnic_free_inflight(struct ibmvnic_adapter *adapter) { - struct ibmvnic_inflight_cmd *inflight_cmd; + struct ibmvnic_inflight_cmd *inflight_cmd, *tmp1; struct device *dev = &adapter->vdev->dev; - struct ibmvnic_error_buff *error_buff; + struct ibmvnic_error_buff *error_buff, *tmp2; unsigned long flags; unsigned long flags2; spin_lock_irqsave(&adapter->inflight_lock, flags); - list_for_each_entry(inflight_cmd, &adapter->inflight, list) { + list_for_each_entry_safe(inflight_cmd, tmp1, &adapter->inflight, list) { switch (inflight_cmd->crq.generic.cmd) { case LOGIN: dma_unmap_single(dev, adapter->login_buf_token, @@ -3165,8 +3165,8 @@ static void ibmvnic_free_inflight(struct ibmvnic_adapter *adapter) break; case REQUEST_ERROR_INFO: spin_lock_irqsave(&adapter->error_list_lock, flags2); - list_for_each_entry(error_buff, &adapter->errors, - list) { + list_for_each_entry_safe(error_buff, tmp2, + &adapter->errors, list) { dma_unmap_single(dev, error_buff->dma, error_buff->len, DMA_FROM_DEVICE); -- cgit v1.2.3 From 5b4d10f5e0369ed79434593b7cd8e85eebbe473f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 27 Jun 2016 23:50:29 +0300 Subject: qlcnic: use the correct ring in qlcnic_83xx_process_rcv_ring_diag() There is a static checker warning here "warn: mask and shift to zero" and the code sets "ring" to zero every time. From looking at how QLCNIC_FETCH_RING_ID() is used in qlcnic_83xx_process_rcv_ring() the qlcnic_83xx_hndl() should be removed. Fixes: 4be41e92f7c6 ('qlcnic: 83xx data path routines') Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 7bd6f25b4625..607bb7d4514d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -2220,7 +2220,7 @@ void qlcnic_83xx_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring) if (!opcode) return; - ring = QLCNIC_FETCH_RING_ID(qlcnic_83xx_hndl(sts_data[0])); + ring = QLCNIC_FETCH_RING_ID(sts_data[0]); qlcnic_83xx_process_rcv_diag(adapter, ring, sts_data); desc = &sds_ring->desc_head[consumer]; desc->status_desc_data[0] = cpu_to_le64(STATUS_OWNER_PHANTOM); -- cgit v1.2.3 From 889ad4566604610804df984e1a3dd5e2c66256e5 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Tue, 28 Jun 2016 20:41:31 -0700 Subject: e1000e: keep VLAN interfaces functional after rxvlan off I've got a bug report about an e1000e interface, where a VLAN interface is set up on top of it: $ ip link add link ens1f0 name ens1f0.99 type vlan id 99 $ ip link set ens1f0 up $ ip link set ens1f0.99 up $ ip addr add 192.168.99.92 dev ens1f0.99 At this point, I can ping another host on vlan 99, ip 192.168.99.91. However, if I do the following: $ ethtool -K ens1f0 rxvlan off Then no traffic passes on ens1f0.99. It comes back if I toggle rxvlan on again. I'm not sure if this is actually intended behavior, or if there's a lack of software VLAN stripping fallback, or what, but things continue to work if I simply don't call e1000e_vlan_strip_disable() if there are active VLANs (plagiarizing a function from the e1000 driver here) on the interface. Also slipped a related-ish fix to the kerneldoc text for e1000e_vlan_strip_disable here... Signed-off-by: Jarod Wilson Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/e1000e/netdev.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 75e60897b7e7..73f745205a1c 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -154,6 +154,16 @@ void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val) writel(val, hw->hw_addr + reg); } +static bool e1000e_vlan_used(struct e1000_adapter *adapter) +{ + u16 vid; + + for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) + return true; + + return false; +} + /** * e1000_regdump - register printout routine * @hw: pointer to the HW structure @@ -2789,7 +2799,7 @@ static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter) } /** - * e1000e_vlan_strip_enable - helper to disable HW VLAN stripping + * e1000e_vlan_strip_disable - helper to disable HW VLAN stripping * @adapter: board private structure to initialize **/ static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter) @@ -3443,7 +3453,8 @@ static void e1000e_set_rx_mode(struct net_device *netdev) ew32(RCTL, rctl); - if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) + if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX || + e1000e_vlan_used(adapter)) e1000e_vlan_strip_enable(adapter); else e1000e_vlan_strip_disable(adapter); -- cgit v1.2.3 From 34c7bb4705a0a2d344b0c82eaf3d3bfa2bc9da45 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Tue, 28 Jun 2016 07:46:03 -0400 Subject: qed: Protect the doorbell BAR with the write barriers. SPQ doorbell is currently protected with the compilation barrier. Under the stress scenarios, we may get into a state where (due to the weak ordering) several ramrod doorbells were written to the BAR with an out-of-order producer values. Need to change the barrier type to a write barrier to make sure that the write buffer is flushed after each doorbell. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_spq.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c index 67d9893774d8..b122f6013b6c 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_spq.c +++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c @@ -213,19 +213,15 @@ static int qed_spq_hw_post(struct qed_hwfn *p_hwfn, SET_FIELD(db.params, CORE_DB_DATA_AGG_VAL_SEL, DQ_XCM_CORE_SPQ_PROD_CMD); db.agg_flags = DQ_XCM_CORE_DQ_CF_CMD; - - /* validate producer is up to-date */ - rmb(); - db.spq_prod = cpu_to_le16(qed_chain_get_prod_idx(p_chain)); - /* do not reorder */ - barrier(); + /* make sure the SPQE is updated before the doorbell */ + wmb(); DOORBELL(p_hwfn, qed_db_addr(p_spq->cid, DQ_DEMS_LEGACY), *(u32 *)&db); /* make sure doorbell is rang */ - mmiowb(); + wmb(); DP_VERBOSE(p_hwfn, QED_MSG_SPQ, "Doorbelled [0x%08x, CID 0x%08x] with Flags: %02x agg_params: %02x, prod: %04x\n", -- cgit v1.2.3 From 3a8bd717ee3e0508fc0dd517b97e950989e15f8c Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 27 Jun 2016 14:46:47 +0800 Subject: drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index d23dcce6c03c..d15584c84595 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -2924,6 +2924,31 @@ static int polaris10_set_private_data_based_on_pptable(struct pp_hwmgr *hwmgr) return 0; } +int polaris10_patch_voltage_workaround(struct pp_hwmgr *hwmgr) +{ + struct phm_ppt_v1_information *table_info = + (struct phm_ppt_v1_information *)(hwmgr->pptable); + struct phm_ppt_v1_clock_voltage_dependency_table *dep_mclk_table = + table_info->vdd_dep_on_mclk; + struct phm_ppt_v1_voltage_lookup_table *lookup_table = + table_info->vddc_lookup_table; + uint32_t i; + + if (hwmgr->chip_id == CHIP_POLARIS10 && hwmgr->hw_revision == 0xC7) { + if (lookup_table->entries[dep_mclk_table->entries[dep_mclk_table->count-1].vddInd].us_vdd >= 1000) + return 0; + + for (i = 0; i < lookup_table->count; i++) { + if (lookup_table->entries[i].us_vdd < 0xff01 && lookup_table->entries[i].us_vdd >= 1000) { + dep_mclk_table->entries[dep_mclk_table->count-1].vddInd = (uint8_t) i; + return 0; + } + } + } + return 0; +} + + int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) { struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); @@ -3001,6 +3026,7 @@ int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) polaris10_set_features_platform_caps(hwmgr); + polaris10_patch_voltage_workaround(hwmgr); polaris10_init_dpm_defaults(hwmgr); /* Get leakage voltage based on leakage ID. */ -- cgit v1.2.3 From 0636e0d666e0238fa22348172c20a49f42a94395 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 27 Jun 2016 17:30:24 +0800 Subject: drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11. 1. Populate correct value of VDDCI voltage for SMC SAMU, VCE, and UVD levels depending on whether VDDCi control is SVI2 or GPIO. 2. Populate SMC ACPI minimum voltage using VBIOS boot SCLK and MCLK When static voltage is configured as VDDCI, driver still tries to program a voltage for MM minVoltage using VDDC-VDDCI delta requirement. minVoltage should be set as boot up voltage. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 101 ++++++++++++--------- 1 file changed, 60 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index d15584c84595..ec2a7ada346a 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -1423,22 +1423,19 @@ static int polaris10_populate_smc_acpi_level(struct pp_hwmgr *hwmgr, table->ACPILevel.Flags &= ~PPSMC_SWSTATE_FLAG_DC; - if (!data->sclk_dpm_key_disabled) { - /* Get MinVoltage and Frequency from DPM0, - * already converted to SMC_UL */ - sclk_frequency = data->dpm_table.sclk_table.dpm_levels[0].value; - result = polaris10_get_dependency_volt_by_clk(hwmgr, - table_info->vdd_dep_on_sclk, - table->ACPILevel.SclkFrequency, - &table->ACPILevel.MinVoltage, &mvdd); - PP_ASSERT_WITH_CODE((0 == result), - "Cannot find ACPI VDDC voltage value " - "in Clock Dependency Table", ); - } else { - sclk_frequency = data->vbios_boot_state.sclk_bootup_value; - table->ACPILevel.MinVoltage = - data->vbios_boot_state.vddc_bootup_value * VOLTAGE_SCALE; - } + + /* Get MinVoltage and Frequency from DPM0, + * already converted to SMC_UL */ + sclk_frequency = data->dpm_table.sclk_table.dpm_levels[0].value; + result = polaris10_get_dependency_volt_by_clk(hwmgr, + table_info->vdd_dep_on_sclk, + sclk_frequency, + &table->ACPILevel.MinVoltage, &mvdd); + PP_ASSERT_WITH_CODE((0 == result), + "Cannot find ACPI VDDC voltage value " + "in Clock Dependency Table", + ); + result = polaris10_calculate_sclk_params(hwmgr, sclk_frequency, &(table->ACPILevel.SclkSetting)); PP_ASSERT_WITH_CODE(result == 0, "Error retrieving Engine Clock dividers from VBIOS.", return result); @@ -1463,24 +1460,18 @@ static int polaris10_populate_smc_acpi_level(struct pp_hwmgr *hwmgr, CONVERT_FROM_HOST_TO_SMC_US(table->ACPILevel.SclkSetting.Fcw1_frac); CONVERT_FROM_HOST_TO_SMC_US(table->ACPILevel.SclkSetting.Sclk_ss_slew_rate); - if (!data->mclk_dpm_key_disabled) { - /* Get MinVoltage and Frequency from DPM0, already converted to SMC_UL */ - table->MemoryACPILevel.MclkFrequency = - data->dpm_table.mclk_table.dpm_levels[0].value; - result = polaris10_get_dependency_volt_by_clk(hwmgr, - table_info->vdd_dep_on_mclk, - table->MemoryACPILevel.MclkFrequency, - &table->MemoryACPILevel.MinVoltage, &mvdd); - PP_ASSERT_WITH_CODE((0 == result), - "Cannot find ACPI VDDCI voltage value " - "in Clock Dependency Table", - ); - } else { - table->MemoryACPILevel.MclkFrequency = - data->vbios_boot_state.mclk_bootup_value; - table->MemoryACPILevel.MinVoltage = - data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE; - } + + /* Get MinVoltage and Frequency from DPM0, already converted to SMC_UL */ + table->MemoryACPILevel.MclkFrequency = + data->dpm_table.mclk_table.dpm_levels[0].value; + result = polaris10_get_dependency_volt_by_clk(hwmgr, + table_info->vdd_dep_on_mclk, + table->MemoryACPILevel.MclkFrequency, + &table->MemoryACPILevel.MinVoltage, &mvdd); + PP_ASSERT_WITH_CODE((0 == result), + "Cannot find ACPI VDDCI voltage value " + "in Clock Dependency Table", + ); us_mvdd = 0; if ((POLARIS10_VOLTAGE_CONTROL_NONE == data->mvdd_control) || @@ -1525,6 +1516,7 @@ static int polaris10_populate_smc_vce_level(struct pp_hwmgr *hwmgr, struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table = table_info->mm_dep_table; struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + uint32_t vddci; table->VceLevelCount = (uint8_t)(mm_table->count); table->VceBootLevel = 0; @@ -1534,9 +1526,18 @@ static int polaris10_populate_smc_vce_level(struct pp_hwmgr *hwmgr, table->VceLevel[count].MinVoltage = 0; table->VceLevel[count].MinVoltage |= (mm_table->entries[count].vddc * VOLTAGE_SCALE) << VDDC_SHIFT; + + if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control) + vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table), + mm_table->entries[count].vddc - VDDC_VDDCI_DELTA); + else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control) + vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA; + else + vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT; + + table->VceLevel[count].MinVoltage |= - ((mm_table->entries[count].vddc - data->vddc_vddci_delta) * - VOLTAGE_SCALE) << VDDCI_SHIFT; + (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT; table->VceLevel[count].MinVoltage |= 1 << PHASES_SHIFT; /*retrieve divider value for VBIOS */ @@ -1565,6 +1566,7 @@ static int polaris10_populate_smc_samu_level(struct pp_hwmgr *hwmgr, struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table = table_info->mm_dep_table; struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + uint32_t vddci; table->SamuBootLevel = 0; table->SamuLevelCount = (uint8_t)(mm_table->count); @@ -1575,8 +1577,16 @@ static int polaris10_populate_smc_samu_level(struct pp_hwmgr *hwmgr, table->SamuLevel[count].Frequency = mm_table->entries[count].samclock; table->SamuLevel[count].MinVoltage |= (mm_table->entries[count].vddc * VOLTAGE_SCALE) << VDDC_SHIFT; - table->SamuLevel[count].MinVoltage |= ((mm_table->entries[count].vddc - - data->vddc_vddci_delta) * VOLTAGE_SCALE) << VDDCI_SHIFT; + + if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control) + vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table), + mm_table->entries[count].vddc - VDDC_VDDCI_DELTA); + else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control) + vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA; + else + vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT; + + table->SamuLevel[count].MinVoltage |= (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT; table->SamuLevel[count].MinVoltage |= 1 << PHASES_SHIFT; /* retrieve divider value for VBIOS */ @@ -1659,6 +1669,7 @@ static int polaris10_populate_smc_uvd_level(struct pp_hwmgr *hwmgr, struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table = table_info->mm_dep_table; struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + uint32_t vddci; table->UvdLevelCount = (uint8_t)(mm_table->count); table->UvdBootLevel = 0; @@ -1669,8 +1680,16 @@ static int polaris10_populate_smc_uvd_level(struct pp_hwmgr *hwmgr, table->UvdLevel[count].DclkFrequency = mm_table->entries[count].dclk; table->UvdLevel[count].MinVoltage |= (mm_table->entries[count].vddc * VOLTAGE_SCALE) << VDDC_SHIFT; - table->UvdLevel[count].MinVoltage |= ((mm_table->entries[count].vddc - - data->vddc_vddci_delta) * VOLTAGE_SCALE) << VDDCI_SHIFT; + + if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control) + vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table), + mm_table->entries[count].vddc - VDDC_VDDCI_DELTA); + else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control) + vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA; + else + vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT; + + table->UvdLevel[count].MinVoltage |= (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT; table->UvdLevel[count].MinVoltage |= 1 << PHASES_SHIFT; /* retrieve divider value for VBIOS */ @@ -1691,8 +1710,8 @@ static int polaris10_populate_smc_uvd_level(struct pp_hwmgr *hwmgr, CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].VclkFrequency); CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].DclkFrequency); CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].MinVoltage); - } + return result; } -- cgit v1.2.3 From d9d533c1483c4daf76e7e720c35896a430563ff8 Mon Sep 17 00:00:00 2001 From: Ken Wang Date: Tue, 28 Jun 2016 13:28:50 +0800 Subject: drm/amdgpu: add ACLK_CNTL setting for polaris10 This is a temporary workaround for early boards. Signed-off-by: Ken Wang Reviewed-by: Rex Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 1a5cbaff1e34..b2ebd4fef6cf 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -47,6 +47,8 @@ #include "dce/dce_10_0_d.h" #include "dce/dce_10_0_sh_mask.h" +#include "smu/smu_7_1_3_d.h" + #define GFX8_NUM_GFX_RINGS 1 #define GFX8_NUM_COMPUTE_RINGS 8 @@ -693,6 +695,7 @@ static void gfx_v8_0_init_golden_registers(struct amdgpu_device *adev) amdgpu_program_register_sequence(adev, polaris10_golden_common_all, (const u32)ARRAY_SIZE(polaris10_golden_common_all)); + WREG32_SMC(ixCG_ACLK_CNTL, 0x0000001C); break; case CHIP_CARRIZO: amdgpu_program_register_sequence(adev, -- cgit v1.2.3 From a7f14a184e0e8e94becfc3f9608f6b0f9c339572 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 28 Jun 2016 16:22:07 +0800 Subject: drm/amd/powerplay: workaround for UVD clock issue workaround issue that when uvd dpm disabled, uvd clock remain high on polaris10. Manually turn off the clocks. Signed-off-by: Rex Zhu Reviewed-by: Ken Wang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index e19520c4b4b6..d9c88d13f8db 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -1106,6 +1106,10 @@ static void amdgpu_uvd_idle_work_handler(struct work_struct *work) if (fences == 0 && handles == 0) { if (adev->pm.dpm_enabled) { amdgpu_dpm_enable_uvd(adev, false); + /* just work around for uvd clock remain high even + * when uvd dpm disabled on Polaris10 */ + if (adev->asic_type == CHIP_POLARIS10) + amdgpu_asic_set_uvd_clocks(adev, 0, 0); } else { amdgpu_asic_set_uvd_clocks(adev, 0, 0); } -- cgit v1.2.3 From 91ff811f32763ea3135e832f7c1aeafc85ae1c98 Mon Sep 17 00:00:00 2001 From: Venkat Reddy Talla Date: Wed, 29 Jun 2016 15:31:27 +0530 Subject: regulator: max77620: check for valid regulator info SD4 regulator is not registered with regulator core framework in probe as there is no support in MAX77620 PMIC, removing SD4 entry from MAX77620 regulator information list and checking for valid regulator information data before configuring FPS source and FPS power up/down period to avoid NULL pointer exception if regulator not registered with core. Signed-off-by: Venkat Reddy Talla Signed-off-by: Mark Brown --- drivers/regulator/max77620-regulator.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c index 321e804aeab0..a1b49a6d538f 100644 --- a/drivers/regulator/max77620-regulator.c +++ b/drivers/regulator/max77620-regulator.c @@ -123,6 +123,9 @@ static int max77620_regulator_set_fps_src(struct max77620_regulator *pmic, unsigned int val; int ret; + if (!rinfo) + return 0; + switch (fps_src) { case MAX77620_FPS_SRC_0: case MAX77620_FPS_SRC_1: @@ -171,6 +174,9 @@ static int max77620_regulator_set_fps_slots(struct max77620_regulator *pmic, int pd = rpdata->active_fps_pd_slot; int ret = 0; + if (!rinfo) + return 0; + if (is_suspend) { pu = rpdata->suspend_fps_pu_slot; pd = rpdata->suspend_fps_pd_slot; @@ -680,7 +686,6 @@ static struct max77620_regulator_info max77620_regs_info[MAX77620_NUM_REGS] = { RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 1550000, 12500, 0x22, SD1), RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE), RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE), - RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE), RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000), RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000), -- cgit v1.2.3 From 1bcbf42d2732b3fdaa8559b0dfc91567769e23c8 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 29 Jun 2016 11:19:32 -0700 Subject: nfit: fix format interface code byte order Per JEDEC Annex L Release 3 the SPD data is: Bits 9~5 00 000 = Function Undefined 00 001 = Byte addressable energy backed 00 010 = Block addressed 00 011 = Byte addressable, no energy backed All other codes reserved Bits 4~0 0 0000 = Proprietary interface 0 0001 = Standard interface 1 All other codes reserved; see Definitions of Functions ...and per the ACPI 6.1 spec: byte0: Bits 4~0 (0 or 1) byte1: Bits 9~5 (1, 2, or 3) ...so a format interface code displayed as 0x301 should be stored in the nfit as (0x1, 0x3), little-endian. Cc: Toshi Kani Cc: Rafael J. Wysocki Cc: Robert Moore Cc: Robert Elliott Link: https://bugzilla.kernel.org/show_bug.cgi?id=121161 Fixes: 30ec5fd464d5 ("nfit: fix format interface code byte order per ACPI6.1") Fixes: 5ad9a7fde07a ("acpi/nfit: Update nfit driver to comply with ACPI 6.1") Reported-by: Kristin Jacque Signed-off-by: Dan Williams --- drivers/acpi/nfit.c | 6 +++--- drivers/acpi/nfit.h | 10 +++++----- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c index 32579a7b71d5..ac6ddcc080d4 100644 --- a/drivers/acpi/nfit.c +++ b/drivers/acpi/nfit.c @@ -928,7 +928,7 @@ static ssize_t format_show(struct device *dev, { struct acpi_nfit_control_region *dcr = to_nfit_dcr(dev); - return sprintf(buf, "0x%04x\n", be16_to_cpu(dcr->code)); + return sprintf(buf, "0x%04x\n", le16_to_cpu(dcr->code)); } static DEVICE_ATTR_RO(format); @@ -961,8 +961,8 @@ static ssize_t format1_show(struct device *dev, continue; if (nfit_dcr->dcr->code == dcr->code) continue; - rc = sprintf(buf, "%#x\n", - be16_to_cpu(nfit_dcr->dcr->code)); + rc = sprintf(buf, "0x%04x\n", + le16_to_cpu(nfit_dcr->dcr->code)); break; } if (rc != ENXIO) diff --git a/drivers/acpi/nfit.h b/drivers/acpi/nfit.h index 11cb38348aef..02b9ea1e8d2e 100644 --- a/drivers/acpi/nfit.h +++ b/drivers/acpi/nfit.h @@ -53,12 +53,12 @@ enum nfit_uuids { }; /* - * Region format interface codes are stored as an array of bytes in the - * NFIT DIMM Control Region structure + * Region format interface codes are stored with the interface as the + * LSB and the function as the MSB. */ -#define NFIT_FIC_BYTE cpu_to_be16(0x101) /* byte-addressable energy backed */ -#define NFIT_FIC_BLK cpu_to_be16(0x201) /* block-addressable non-energy backed */ -#define NFIT_FIC_BYTEN cpu_to_be16(0x301) /* byte-addressable non-energy backed */ +#define NFIT_FIC_BYTE cpu_to_le16(0x101) /* byte-addressable energy backed */ +#define NFIT_FIC_BLK cpu_to_le16(0x201) /* block-addressable non-energy backed */ +#define NFIT_FIC_BYTEN cpu_to_le16(0x301) /* byte-addressable non-energy backed */ enum { NFIT_BLK_READ_FLUSH = 1, -- cgit v1.2.3 From f5ee3f2b5ad6881a8194b9f684ce11640d1062f7 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 6 Jun 2016 18:08:54 +0100 Subject: usb: host: ohci-st: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the ST EHCI IP shares its reset line with the OHCI IP. New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Alan Stern Signed-off-by: Lee Jones --- drivers/usb/host/ohci-st.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-st.c b/drivers/usb/host/ohci-st.c index acf2eb2a5676..02816a1515a1 100644 --- a/drivers/usb/host/ohci-st.c +++ b/drivers/usb/host/ohci-st.c @@ -188,13 +188,15 @@ static int st_ohci_platform_probe(struct platform_device *dev) priv->clk48 = NULL; } - priv->pwr = devm_reset_control_get_optional(&dev->dev, "power"); + priv->pwr = + devm_reset_control_get_optional_shared(&dev->dev, "power"); if (IS_ERR(priv->pwr)) { err = PTR_ERR(priv->pwr); goto err_put_clks; } - priv->rst = devm_reset_control_get_optional(&dev->dev, "softreset"); + priv->rst = + devm_reset_control_get_optional_shared(&dev->dev, "softreset"); if (IS_ERR(priv->rst)) { err = PTR_ERR(priv->rst); goto err_put_clks; -- cgit v1.2.3 From 19599304625b74c95bff318c735928eec668b1ca Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 6 Jun 2016 18:08:53 +0100 Subject: usb: host: ehci-st: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the ST EHCI IP shares its reset line with the OHCI IP. New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Peter Griffin Acked-by: Alan Stern Signed-off-by: Lee Jones --- drivers/usb/host/ehci-st.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c index a94ed677d937..be4a2788fc58 100644 --- a/drivers/usb/host/ehci-st.c +++ b/drivers/usb/host/ehci-st.c @@ -206,7 +206,8 @@ static int st_ehci_platform_probe(struct platform_device *dev) priv->clk48 = NULL; } - priv->pwr = devm_reset_control_get_optional(&dev->dev, "power"); + priv->pwr = + devm_reset_control_get_optional_shared(&dev->dev, "power"); if (IS_ERR(priv->pwr)) { err = PTR_ERR(priv->pwr); if (err == -EPROBE_DEFER) @@ -214,7 +215,8 @@ static int st_ehci_platform_probe(struct platform_device *dev) priv->pwr = NULL; } - priv->rst = devm_reset_control_get_optional(&dev->dev, "softreset"); + priv->rst = + devm_reset_control_get_optional_shared(&dev->dev, "softreset"); if (IS_ERR(priv->rst)) { err = PTR_ERR(priv->rst); if (err == -EPROBE_DEFER) -- cgit v1.2.3 From 002f17bc54ff4005260d8e6e6700de97f5b25679 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 28 Jun 2016 09:23:58 +0100 Subject: usb: dwc3: st: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the MiPHY28lp shares its reset line with the Synopsys DWC3 SuperSpeed (SS) USB 3.0 Dual-Role-Device (DRD). New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Felipe Balbi Signed-off-by: Lee Jones --- drivers/usb/dwc3/dwc3-st.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index 5c0adb9c6fb2..b204617ea4e6 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -237,7 +237,8 @@ static int st_dwc3_probe(struct platform_device *pdev) /* Manage PowerDown */ reset_control_deassert(dwc3_data->rstc_pwrdn); - dwc3_data->rstc_rst = devm_reset_control_get(dev, "softreset"); + dwc3_data->rstc_rst = + devm_reset_control_get_shared(dev, "softreset"); if (IS_ERR(dwc3_data->rstc_rst)) { dev_err(&pdev->dev, "could not get reset controller\n"); ret = PTR_ERR(dwc3_data->rstc_rst); -- cgit v1.2.3 From 9278e707f4e187df2b4d9eeb2bc78a1724fbe4ac Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 28 Jun 2016 09:32:12 +0100 Subject: phy: phy-stih407-usb: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the ports on the Generic PHY share their reset lines with each other. New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Signed-off-by: Lee Jones --- drivers/phy/phy-stih407-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/phy-stih407-usb.c index 1d5ae5f8ef69..53cf8d1b4116 100644 --- a/drivers/phy/phy-stih407-usb.c +++ b/drivers/phy/phy-stih407-usb.c @@ -105,7 +105,7 @@ static int stih407_usb2_picophy_probe(struct platform_device *pdev) phy_dev->dev = dev; dev_set_drvdata(dev, phy_dev); - phy_dev->rstc = devm_reset_control_get(dev, "global"); + phy_dev->rstc = devm_reset_control_get_shared(dev, "global"); if (IS_ERR(phy_dev->rstc)) { dev_err(dev, "failed to ctrl picoPHY reset\n"); return PTR_ERR(phy_dev->rstc); -- cgit v1.2.3 From 82d8eb40bab10082050be945c8e7096df8e9f989 Mon Sep 17 00:00:00 2001 From: Rhyland Klein Date: Thu, 12 May 2016 13:45:04 -0400 Subject: mfd: max77620: Fix FPS switch statements When configuring FPS during probe, assuming a DT node is present for FPS, the code can run into a problem with the switch statements in max77620_config_fps() and max77620_get_fps_period_reg_value(). Namely, in the case of chip->chip_id == MAX77620, it will set fps_[mix|max]_period but then fall through to the default switch case and return -EINVAL. Returning this from max77620_config_fps() will cause probe to fail. Signed-off-by: Rhyland Klein Reviewed-by: Laxman Dewangan Reviewed-by: Thierry Reding Tested-by: Thierry Reding Tested-by: Alexandre Courbot Signed-off-by: Lee Jones --- drivers/mfd/max77620.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c index 199d261990be..f32fbb8e8129 100644 --- a/drivers/mfd/max77620.c +++ b/drivers/mfd/max77620.c @@ -203,6 +203,7 @@ static int max77620_get_fps_period_reg_value(struct max77620_chip *chip, break; case MAX77620: fps_min_period = MAX77620_FPS_PERIOD_MIN_US; + break; default: return -EINVAL; } @@ -236,6 +237,7 @@ static int max77620_config_fps(struct max77620_chip *chip, break; case MAX77620: fps_max_period = MAX77620_FPS_PERIOD_MAX_US; + break; default: return -EINVAL; } -- cgit v1.2.3 From cab103274352721b77fc5923a631fc63350bef8e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 Jun 2016 23:42:00 +0000 Subject: drm/i915: Fix missing unlock on error in i915_ppgtt_info() Add the missing unlock before return from function i915_ppgtt_info() in the error handling case. Fixes: 1d2ac403ae3b(drm: Protect dev->filelist with its own mutex) Signed-off-by: Wei Yongjun Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1465861320-26221-1-git-send-email-weiyj_lk@163.com (cherry picked from commit b0212486909de4f239ca9f20d032de1b1f2dc52e) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 32690332d441..103546834b60 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -2365,16 +2365,16 @@ static int i915_ppgtt_info(struct seq_file *m, void *data) task = get_pid_task(file->pid, PIDTYPE_PID); if (!task) { ret = -ESRCH; - goto out_put; + goto out_unlock; } seq_printf(m, "\nproc: %s\n", task->comm); put_task_struct(task); idr_for_each(&file_priv->context_idr, per_file_ctx, (void *)(unsigned long)m); } +out_unlock: mutex_unlock(&dev->filelist_mutex); -out_put: intel_runtime_pm_put(dev_priv); mutex_unlock(&dev->struct_mutex); -- cgit v1.2.3 From 54794580f5949253520265e46c903878ab222d84 Mon Sep 17 00:00:00 2001 From: Sinan Kaya Date: Wed, 29 Jun 2016 04:27:38 -0400 Subject: ACPI,PCI,IRQ: correct operator precedence The omitted parenthesis prevents the addition operation when acpi_penalize_isa_irq function is called. Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Signed-off-by: Sinan Kaya Signed-off-by: Rafael J. Wysocki --- drivers/acpi/pci_link.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 8fc7323ed3e8..4ed4061813e6 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -839,7 +839,7 @@ void acpi_penalize_isa_irq(int irq, int active) { if ((irq >= 0) && (irq < ARRAY_SIZE(acpi_isa_irq_penalty))) acpi_isa_irq_penalty[irq] = acpi_irq_get_penalty(irq) + - active ? PIRQ_PENALTY_ISA_USED : PIRQ_PENALTY_PCI_USING; + (active ? PIRQ_PENALTY_ISA_USED : PIRQ_PENALTY_PCI_USING); } bool acpi_isa_irq_available(int irq) -- cgit v1.2.3 From 8293c8a3bb068bd2d2dfe00b6b0000a8fc5c860a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 Jun 2016 11:44:28 +0100 Subject: phy: miphy28lp: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the MiPHY28lp shares its reset line with the Synopsys DWC3 SuperSpeed (SS) USB 3.0 Dual-Role-Device (DRD). New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Kishon Vijay Abraham I Signed-off-by: Lee Jones --- drivers/phy/phy-miphy28lp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/phy-miphy28lp.c index 3acd2a1808df..213e2e15339c 100644 --- a/drivers/phy/phy-miphy28lp.c +++ b/drivers/phy/phy-miphy28lp.c @@ -1143,7 +1143,8 @@ static int miphy28lp_probe_resets(struct device_node *node, struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; int err; - miphy_phy->miphy_rst = of_reset_control_get(node, "miphy-sw-rst"); + miphy_phy->miphy_rst = + of_reset_control_get_shared(node, "miphy-sw-rst"); if (IS_ERR(miphy_phy->miphy_rst)) { dev_err(miphy_dev->dev, -- cgit v1.2.3 From f5f35830fb84364a24794fe6c7101f85318481d2 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 28 Jun 2016 09:33:55 +0100 Subject: phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API We're making all reset line users specify whether their lines are shared with other IP or they operate them exclusively. In this case the line is exclusively used only by this IP, so use the *_exclusive() API accordingly. Acked-by: Kishon Vijay Abraham I Signed-off-by: Lee Jones --- drivers/phy/phy-stih407-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/phy-stih407-usb.c index 53cf8d1b4116..b1f44ab669fb 100644 --- a/drivers/phy/phy-stih407-usb.c +++ b/drivers/phy/phy-stih407-usb.c @@ -111,7 +111,7 @@ static int stih407_usb2_picophy_probe(struct platform_device *pdev) return PTR_ERR(phy_dev->rstc); } - phy_dev->rstport = devm_reset_control_get(dev, "port"); + phy_dev->rstport = devm_reset_control_get_exclusive(dev, "port"); if (IS_ERR(phy_dev->rstport)) { dev_err(dev, "failed to ctrl picoPHY reset\n"); return PTR_ERR(phy_dev->rstport); -- cgit v1.2.3 From 5baaf3b9efe127d239038de9219d381f4d882b26 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 28 Jun 2016 09:24:40 +0100 Subject: usb: dwc3: st: Use explicit reset_control_get_exclusive() API We're making all reset line users specify whether their lines are shared with other IP or they operate them exclusively. In this case the line is exclusively used only by this IP, so use the *_exclusive() API accordingly. Acked-by: Felipe Balbi Signed-off-by: Lee Jones --- drivers/usb/dwc3/dwc3-st.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index b204617ea4e6..e77bacb8358a 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -227,7 +227,8 @@ static int st_dwc3_probe(struct platform_device *pdev) dev_vdbg(&pdev->dev, "glue-logic addr 0x%p, syscfg-reg offset 0x%x\n", dwc3_data->glue_base, dwc3_data->syscfg_reg_off); - dwc3_data->rstc_pwrdn = devm_reset_control_get(dev, "powerdown"); + dwc3_data->rstc_pwrdn = + devm_reset_control_get_exclusive(dev, "powerdown"); if (IS_ERR(dwc3_data->rstc_pwrdn)) { dev_err(&pdev->dev, "could not get power controller\n"); ret = PTR_ERR(dwc3_data->rstc_pwrdn); -- cgit v1.2.3 From 5eb6d660193ccc471b415d6f31e17312a63de167 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 12 Jul 2016 18:20:14 +0900 Subject: PCI: Add pci_msix_desc_addr() helper Add a pci_msix_desc_addr() helper to factor out the calculation of the base address for a given MSI-X vector. Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas Reviewed-by: Alexander Gordeev --- drivers/pci/msi.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index a080f4496fe2..0d94fbf95ba6 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -207,6 +207,12 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) desc->masked = __pci_msi_desc_mask_irq(desc, mask, flag); } +static void __iomem *pci_msix_desc_addr(struct msi_desc *desc) +{ + return desc->mask_base + + desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; +} + /* * This internal function does not flush PCI writes to the device. * All users must ensure that they read from the device before either @@ -217,8 +223,6 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag) { u32 mask_bits = desc->masked; - unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL; if (pci_msi_ignore_mask) return 0; @@ -226,7 +230,7 @@ u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag) mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT; if (flag) mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT; - writel(mask_bits, desc->mask_base + offset); + writel(mask_bits, pci_msix_desc_addr(desc) + PCI_MSIX_ENTRY_VECTOR_CTRL); return mask_bits; } @@ -284,8 +288,7 @@ void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg) BUG_ON(dev->current_state != PCI_D0); if (entry->msi_attrib.is_msix) { - void __iomem *base = entry->mask_base + - entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; + void __iomem *base = pci_msix_desc_addr(entry); msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR); msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR); @@ -315,9 +318,7 @@ void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg) if (dev->current_state != PCI_D0) { /* Don't touch the hardware now */ } else if (entry->msi_attrib.is_msix) { - void __iomem *base; - base = entry->mask_base + - entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; + void __iomem *base = pci_msix_desc_addr(entry); writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR); writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR); -- cgit v1.2.3 From 12eb21de1f26233ad195ffe991697d61790f4193 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 12 Jul 2016 18:20:15 +0900 Subject: PCI: Switch msix_program_entries() to use pci_msix_desc_addr() Instead of relying on the msix_entry structure for the vector number, read it from the msi_desc. Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas Reviewed-by: Alexander Gordeev --- drivers/pci/msi.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 0d94fbf95ba6..a385f39be6f7 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -713,11 +713,9 @@ static void msix_program_entries(struct pci_dev *dev, int i = 0; for_each_pci_msi_entry(entry, dev) { - int offset = entries[i].entry * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL; - entries[i].vector = entry->irq; - entry->masked = readl(entry->mask_base + offset); + entry->masked = readl(pci_msix_desc_addr(entry) + + PCI_MSIX_ENTRY_VECTOR_CTRL); msix_mask_irq(entry, 1); i++; } -- cgit v1.2.3 From 3ac020e0ca8beff9b695f9866a06d50c09c602d6 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 12 Jul 2016 18:20:16 +0900 Subject: PCI: Make the "entries" argument to pci_enable_msix() optional The "entries" argument isn't needed if the list of entries does not contain any holes. Make it optional so that we can avoid the need to allocate a msix_entry structure for this (common) case. Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas Reviewed-by: Alexander Gordeev --- drivers/pci/msi.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index a385f39be6f7..98ace67c5f4d 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -695,7 +695,10 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base, entry->msi_attrib.is_msix = 1; entry->msi_attrib.is_64 = 1; - entry->msi_attrib.entry_nr = entries[i].entry; + if (entries) + entry->msi_attrib.entry_nr = entries[i].entry; + else + entry->msi_attrib.entry_nr = i; entry->msi_attrib.default_irq = dev->irq; entry->mask_base = base; entry->nvec_used = 1; @@ -713,11 +716,11 @@ static void msix_program_entries(struct pci_dev *dev, int i = 0; for_each_pci_msi_entry(entry, dev) { - entries[i].vector = entry->irq; + if (entries) + entries[i++].vector = entry->irq; entry->masked = readl(pci_msix_desc_addr(entry) + PCI_MSIX_ENTRY_VECTOR_CTRL); msix_mask_irq(entry, 1); - i++; } } @@ -930,7 +933,7 @@ EXPORT_SYMBOL(pci_msix_vec_count); /** * pci_enable_msix - configure device's MSI-X capability structure * @dev: pointer to the pci_dev data structure of MSI-X device function - * @entries: pointer to an array of MSI-X entries + * @entries: pointer to an array of MSI-X entries (optional) * @nvec: number of MSI-X irqs requested for allocation by device driver * * Setup the MSI-X capability structure of device function with the number @@ -950,22 +953,21 @@ int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec) if (!pci_msi_supported(dev, nvec)) return -EINVAL; - if (!entries) - return -EINVAL; - nr_entries = pci_msix_vec_count(dev); if (nr_entries < 0) return nr_entries; if (nvec > nr_entries) return nr_entries; - /* Check for any invalid entries */ - for (i = 0; i < nvec; i++) { - if (entries[i].entry >= nr_entries) - return -EINVAL; /* invalid entry */ - for (j = i + 1; j < nvec; j++) { - if (entries[i].entry == entries[j].entry) - return -EINVAL; /* duplicate entry */ + if (entries) { + /* Check for any invalid entries */ + for (i = 0; i < nvec; i++) { + if (entries[i].entry >= nr_entries) + return -EINVAL; /* invalid entry */ + for (j = i + 1; j < nvec; j++) { + if (entries[i].entry == entries[j].entry) + return -EINVAL; /* duplicate entry */ + } } } WARN_ON(!!dev->msix_enabled); -- cgit v1.2.3 From aff171641d181ea573380efc3f559c9de4741fc5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 12 Jul 2016 18:20:17 +0900 Subject: PCI: Provide sensible IRQ vector alloc/free routines Add a function to allocate and free a range of interrupt vectors, using MSI-X, MSI or legacy vectors (in that order) based on the capabilities of the underlying device and PCIe complex. Additionally a new helper is provided to get the Linux IRQ number for given device-relative vector so that the drivers don't need to allocate their own arrays to keep track of the vectors for the multi vector MSI-X case. Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas Reviewed-by: Alexander Gordeev --- Documentation/PCI/MSI-HOWTO.txt | 467 +++++++--------------------------------- drivers/pci/msi.c | 89 ++++++++ include/linux/pci.h | 27 +++ 3 files changed, 192 insertions(+), 391 deletions(-) (limited to 'drivers') diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index 1179850f453c..0ac612b8c3fb 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -78,422 +78,107 @@ CONFIG_PCI_MSI option. 4.2 Using MSI -Most of the hard work is done for the driver in the PCI layer. It simply -has to request that the PCI layer set up the MSI capability for this +Most of the hard work is done for the driver in the PCI layer. The driver +simply has to request that the PCI layer set up the MSI capability for this device. -4.2.1 pci_enable_msi +To automatically use MSI or MSI-X interrupt vectors, use the following +function: -int pci_enable_msi(struct pci_dev *dev) + int pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs, + unsigned int max_vecs, unsigned int flags); -A successful call allocates ONE interrupt to the device, regardless -of how many MSIs the device supports. The device is switched from -pin-based interrupt mode to MSI mode. The dev->irq number is changed -to a new number which represents the message signaled interrupt; -consequently, this function should be called before the driver calls -request_irq(), because an MSI is delivered via a vector that is -different from the vector of a pin-based interrupt. +which allocates up to max_vecs interrupt vectors for a PCI device. It +returns the number of vectors allocated or a negative error. If the device +has a requirements for a minimum number of vectors the driver can pass a +min_vecs argument set to this limit, and the PCI core will return -ENOSPC +if it can't meet the minimum number of vectors. -4.2.2 pci_enable_msi_range +The flags argument should normally be set to 0, but can be used to pass the +PCI_IRQ_NOMSI and PCI_IRQ_NOMSIX flag in case a device claims to support +MSI or MSI-X, but the support is broken, or to pass PCI_IRQ_NOLEGACY in +case the device does not support legacy interrupt lines. -int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec) +To get the Linux IRQ numbers passed to request_irq() and free_irq() and the +vectors, use the following function: -This function allows a device driver to request any number of MSI -interrupts within specified range from 'minvec' to 'maxvec'. + int pci_irq_vector(struct pci_dev *dev, unsigned int nr); -If this function returns a positive number it indicates the number of -MSI interrupts that have been successfully allocated. In this case -the device is switched from pin-based interrupt mode to MSI mode and -updates dev->irq to be the lowest of the new interrupts assigned to it. -The other interrupts assigned to the device are in the range dev->irq -to dev->irq + returned value - 1. Device driver can use the returned -number of successfully allocated MSI interrupts to further allocate -and initialize device resources. +Any allocated resources should be freed before removing the device using +the following function: -If this function returns a negative number, it indicates an error and -the driver should not attempt to request any more MSI interrupts for -this device. + void pci_free_irq_vectors(struct pci_dev *dev); -This function should be called before the driver calls request_irq(), -because MSI interrupts are delivered via vectors that are different -from the vector of a pin-based interrupt. +If a device supports both MSI-X and MSI capabilities, this API will use the +MSI-X facilities in preference to the MSI facilities. MSI-X supports any +number of interrupts between 1 and 2048. In contrast, MSI is restricted to +a maximum of 32 interrupts (and must be a power of two). In addition, the +MSI interrupt vectors must be allocated consecutively, so the system might +not be able to allocate as many vectors for MSI as it could for MSI-X. On +some platforms, MSI interrupts must all be targeted at the same set of CPUs +whereas MSI-X interrupts can all be targeted at different CPUs. -It is ideal if drivers can cope with a variable number of MSI interrupts; -there are many reasons why the platform may not be able to provide the -exact number that a driver asks for. +If a device supports neither MSI-X or MSI it will fall back to a single +legacy IRQ vector. -There could be devices that can not operate with just any number of MSI -interrupts within a range. See chapter 4.3.1.3 to get the idea how to -handle such devices for MSI-X - the same logic applies to MSI. +The typical usage of MSI or MSI-X interrupts is to allocate as many vectors +as possible, likely up to the limit supported by the device. If nvec is +larger than the number supported by the device it will automatically be +capped to the supported limit, so there is no need to query the number of +vectors supported beforehand: -4.2.1.1 Maximum possible number of MSI interrupts - -The typical usage of MSI interrupts is to allocate as many vectors as -possible, likely up to the limit returned by pci_msi_vec_count() function: - -static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec) -{ - return pci_enable_msi_range(pdev, 1, nvec); -} - -Note the value of 'minvec' parameter is 1. As 'minvec' is inclusive, -the value of 0 would be meaningless and could result in error. - -Some devices have a minimal limit on number of MSI interrupts. -In this case the function could look like this: - -static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec) -{ - return pci_enable_msi_range(pdev, FOO_DRIVER_MINIMUM_NVEC, nvec); -} - -4.2.1.2 Exact number of MSI interrupts + nvec = pci_alloc_irq_vectors(pdev, 1, nvec, 0); + if (nvec < 0) + goto out_err; If a driver is unable or unwilling to deal with a variable number of MSI -interrupts it could request a particular number of interrupts by passing -that number to pci_enable_msi_range() function as both 'minvec' and 'maxvec' -parameters: - -static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec) -{ - return pci_enable_msi_range(pdev, nvec, nvec); -} - -Note, unlike pci_enable_msi_exact() function, which could be also used to -enable a particular number of MSI-X interrupts, pci_enable_msi_range() -returns either a negative errno or 'nvec' (not negative errno or 0 - as -pci_enable_msi_exact() does). - -4.2.1.3 Single MSI mode - -The most notorious example of the request type described above is -enabling the single MSI mode for a device. It could be done by passing -two 1s as 'minvec' and 'maxvec': - -static int foo_driver_enable_single_msi(struct pci_dev *pdev) -{ - return pci_enable_msi_range(pdev, 1, 1); -} - -Note, unlike pci_enable_msi() function, which could be also used to -enable the single MSI mode, pci_enable_msi_range() returns either a -negative errno or 1 (not negative errno or 0 - as pci_enable_msi() -does). - -4.2.3 pci_enable_msi_exact - -int pci_enable_msi_exact(struct pci_dev *dev, int nvec) - -This variation on pci_enable_msi_range() call allows a device driver to -request exactly 'nvec' MSIs. - -If this function returns a negative number, it indicates an error and -the driver should not attempt to request any more MSI interrupts for -this device. - -By contrast with pci_enable_msi_range() function, pci_enable_msi_exact() -returns zero in case of success, which indicates MSI interrupts have been -successfully allocated. - -4.2.4 pci_disable_msi - -void pci_disable_msi(struct pci_dev *dev) - -This function should be used to undo the effect of pci_enable_msi_range(). -Calling it restores dev->irq to the pin-based interrupt number and frees -the previously allocated MSIs. The interrupts may subsequently be assigned -to another device, so drivers should not cache the value of dev->irq. - -Before calling this function, a device driver must always call free_irq() -on any interrupt for which it previously called request_irq(). -Failure to do so results in a BUG_ON(), leaving the device with -MSI enabled and thus leaking its vector. - -4.2.4 pci_msi_vec_count - -int pci_msi_vec_count(struct pci_dev *dev) - -This function could be used to retrieve the number of MSI vectors the -device requested (via the Multiple Message Capable register). The MSI -specification only allows the returned value to be a power of two, -up to a maximum of 2^5 (32). - -If this function returns a negative number, it indicates the device is -not capable of sending MSIs. - -If this function returns a positive number, it indicates the maximum -number of MSI interrupt vectors that could be allocated. - -4.3 Using MSI-X - -The MSI-X capability is much more flexible than the MSI capability. -It supports up to 2048 interrupts, each of which can be controlled -independently. To support this flexibility, drivers must use an array of -`struct msix_entry': - -struct msix_entry { - u16 vector; /* kernel uses to write alloc vector */ - u16 entry; /* driver uses to specify entry */ -}; - -This allows for the device to use these interrupts in a sparse fashion; -for example, it could use interrupts 3 and 1027 and yet allocate only a -two-element array. The driver is expected to fill in the 'entry' value -in each element of the array to indicate for which entries the kernel -should assign interrupts; it is invalid to fill in two entries with the -same number. - -4.3.1 pci_enable_msix_range - -int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, - int minvec, int maxvec) - -Calling this function asks the PCI subsystem to allocate any number of -MSI-X interrupts within specified range from 'minvec' to 'maxvec'. -The 'entries' argument is a pointer to an array of msix_entry structs -which should be at least 'maxvec' entries in size. - -On success, the device is switched into MSI-X mode and the function -returns the number of MSI-X interrupts that have been successfully -allocated. In this case the 'vector' member in entries numbered from -0 to the returned value - 1 is populated with the interrupt number; -the driver should then call request_irq() for each 'vector' that it -decides to use. The device driver is responsible for keeping track of the -interrupts assigned to the MSI-X vectors so it can free them again later. -Device driver can use the returned number of successfully allocated MSI-X -interrupts to further allocate and initialize device resources. - -If this function returns a negative number, it indicates an error and -the driver should not attempt to allocate any more MSI-X interrupts for -this device. - -This function, in contrast with pci_enable_msi_range(), does not adjust -dev->irq. The device will not generate interrupts for this interrupt -number once MSI-X is enabled. - -Device drivers should normally call this function once per device -during the initialization phase. - -It is ideal if drivers can cope with a variable number of MSI-X interrupts; -there are many reasons why the platform may not be able to provide the -exact number that a driver asks for. - -There could be devices that can not operate with just any number of MSI-X -interrupts within a range. E.g., an network adapter might need let's say -four vectors per each queue it provides. Therefore, a number of MSI-X -interrupts allocated should be a multiple of four. In this case interface -pci_enable_msix_range() can not be used alone to request MSI-X interrupts -(since it can allocate any number within the range, without any notion of -the multiple of four) and the device driver should master a custom logic -to request the required number of MSI-X interrupts. - -4.3.1.1 Maximum possible number of MSI-X interrupts - -The typical usage of MSI-X interrupts is to allocate as many vectors as -possible, likely up to the limit returned by pci_msix_vec_count() function: - -static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec) -{ - return pci_enable_msix_range(adapter->pdev, adapter->msix_entries, - 1, nvec); -} - -Note the value of 'minvec' parameter is 1. As 'minvec' is inclusive, -the value of 0 would be meaningless and could result in error. - -Some devices have a minimal limit on number of MSI-X interrupts. -In this case the function could look like this: - -static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec) -{ - return pci_enable_msix_range(adapter->pdev, adapter->msix_entries, - FOO_DRIVER_MINIMUM_NVEC, nvec); -} - -4.3.1.2 Exact number of MSI-X interrupts - -If a driver is unable or unwilling to deal with a variable number of MSI-X -interrupts it could request a particular number of interrupts by passing -that number to pci_enable_msix_range() function as both 'minvec' and 'maxvec' -parameters: - -static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec) -{ - return pci_enable_msix_range(adapter->pdev, adapter->msix_entries, - nvec, nvec); -} - -Note, unlike pci_enable_msix_exact() function, which could be also used to -enable a particular number of MSI-X interrupts, pci_enable_msix_range() -returns either a negative errno or 'nvec' (not negative errno or 0 - as -pci_enable_msix_exact() does). - -4.3.1.3 Specific requirements to the number of MSI-X interrupts - -As noted above, there could be devices that can not operate with just any -number of MSI-X interrupts within a range. E.g., let's assume a device that -is only capable sending the number of MSI-X interrupts which is a power of -two. A routine that enables MSI-X mode for such device might look like this: - -/* - * Assume 'minvec' and 'maxvec' are non-zero - */ -static int foo_driver_enable_msix(struct foo_adapter *adapter, - int minvec, int maxvec) -{ - int rc; - - minvec = roundup_pow_of_two(minvec); - maxvec = rounddown_pow_of_two(maxvec); - - if (minvec > maxvec) - return -ERANGE; - -retry: - rc = pci_enable_msix_range(adapter->pdev, adapter->msix_entries, - maxvec, maxvec); - /* - * -ENOSPC is the only error code allowed to be analyzed - */ - if (rc == -ENOSPC) { - if (maxvec == 1) - return -ENOSPC; - - maxvec /= 2; - - if (minvec > maxvec) - return -ENOSPC; - - goto retry; - } - - return rc; -} - -Note how pci_enable_msix_range() return value is analyzed for a fallback - -any error code other than -ENOSPC indicates a fatal error and should not -be retried. - -4.3.2 pci_enable_msix_exact - -int pci_enable_msix_exact(struct pci_dev *dev, - struct msix_entry *entries, int nvec) - -This variation on pci_enable_msix_range() call allows a device driver to -request exactly 'nvec' MSI-Xs. - -If this function returns a negative number, it indicates an error and -the driver should not attempt to allocate any more MSI-X interrupts for -this device. - -By contrast with pci_enable_msix_range() function, pci_enable_msix_exact() -returns zero in case of success, which indicates MSI-X interrupts have been -successfully allocated. - -Another version of a routine that enables MSI-X mode for a device with -specific requirements described in chapter 4.3.1.3 might look like this: - -/* - * Assume 'minvec' and 'maxvec' are non-zero - */ -static int foo_driver_enable_msix(struct foo_adapter *adapter, - int minvec, int maxvec) -{ - int rc; - - minvec = roundup_pow_of_two(minvec); - maxvec = rounddown_pow_of_two(maxvec); - - if (minvec > maxvec) - return -ERANGE; - -retry: - rc = pci_enable_msix_exact(adapter->pdev, - adapter->msix_entries, maxvec); - - /* - * -ENOSPC is the only error code allowed to be analyzed - */ - if (rc == -ENOSPC) { - if (maxvec == 1) - return -ENOSPC; - - maxvec /= 2; - - if (minvec > maxvec) - return -ENOSPC; - - goto retry; - } else if (rc < 0) { - return rc; - } - - return maxvec; -} - -4.3.3 pci_disable_msix - -void pci_disable_msix(struct pci_dev *dev) - -This function should be used to undo the effect of pci_enable_msix_range(). -It frees the previously allocated MSI-X interrupts. The interrupts may -subsequently be assigned to another device, so drivers should not cache -the value of the 'vector' elements over a call to pci_disable_msix(). - -Before calling this function, a device driver must always call free_irq() -on any interrupt for which it previously called request_irq(). -Failure to do so results in a BUG_ON(), leaving the device with -MSI-X enabled and thus leaking its vector. - -4.3.3 The MSI-X Table - -The MSI-X capability specifies a BAR and offset within that BAR for the -MSI-X Table. This address is mapped by the PCI subsystem, and should not -be accessed directly by the device driver. If the driver wishes to -mask or unmask an interrupt, it should call disable_irq() / enable_irq(). +interrupts it can request a particular number of interrupts by passing that +number to pci_alloc_irq_vectors() function as both 'min_vecs' and +'max_vecs' parameters: -4.3.4 pci_msix_vec_count + ret = pci_alloc_irq_vectors(pdev, nvec, nvec, 0); + if (ret < 0) + goto out_err; -int pci_msix_vec_count(struct pci_dev *dev) +The most notorious example of the request type described above is enabling +the single MSI mode for a device. It could be done by passing two 1s as +'min_vecs' and 'max_vecs': -This function could be used to retrieve number of entries in the device -MSI-X table. + ret = pci_alloc_irq_vectors(pdev, 1, 1, 0); + if (ret < 0) + goto out_err; -If this function returns a negative number, it indicates the device is -not capable of sending MSI-Xs. +Some devices might not support using legacy line interrupts, in which case +the PCI_IRQ_NOLEGACY flag can be used to fail the request if the platform +can't provide MSI or MSI-X interrupts: -If this function returns a positive number, it indicates the maximum -number of MSI-X interrupt vectors that could be allocated. + nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_NOLEGACY); + if (nvec < 0) + goto out_err; -4.4 Handling devices implementing both MSI and MSI-X capabilities +4.3 Legacy APIs -If a device implements both MSI and MSI-X capabilities, it can -run in either MSI mode or MSI-X mode, but not both simultaneously. -This is a requirement of the PCI spec, and it is enforced by the -PCI layer. Calling pci_enable_msi_range() when MSI-X is already -enabled or pci_enable_msix_range() when MSI is already enabled -results in an error. If a device driver wishes to switch between MSI -and MSI-X at runtime, it must first quiesce the device, then switch -it back to pin-interrupt mode, before calling pci_enable_msi_range() -or pci_enable_msix_range() and resuming operation. This is not expected -to be a common operation but may be useful for debugging or testing -during development. +The following old APIs to enable and disable MSI or MSI-X interrupts should +not be used in new code: -4.5 Considerations when using MSIs + pci_enable_msi() /* deprecated */ + pci_enable_msi_range() /* deprecated */ + pci_enable_msi_exact() /* deprecated */ + pci_disable_msi() /* deprecated */ + pci_enable_msix_range() /* deprecated */ + pci_enable_msix_exact() /* deprecated */ + pci_disable_msix() /* deprecated */ -4.5.1 Choosing between MSI-X and MSI +Additionally there are APIs to provide the number of supported MSI or MSI-X +vectors: pci_msi_vec_count() and pci_msix_vec_count(). In general these +should be avoided in favor of letting pci_alloc_irq_vectors() cap the +number of vectors. If you have a legitimate special use case for the count +of vectors we might have to revisit that decision and add a +pci_nr_irq_vectors() helper that handles MSI and MSI-X transparently. -If your device supports both MSI-X and MSI capabilities, you should use -the MSI-X facilities in preference to the MSI facilities. As mentioned -above, MSI-X supports any number of interrupts between 1 and 2048. -In contrast, MSI is restricted to a maximum of 32 interrupts (and -must be a power of two). In addition, the MSI interrupt vectors must -be allocated consecutively, so the system might not be able to allocate -as many vectors for MSI as it could for MSI-X. On some platforms, MSI -interrupts must all be targeted at the same set of CPUs whereas MSI-X -interrupts can all be targeted at different CPUs. +4.4 Considerations when using MSIs -4.5.2 Spinlocks +4.4.1 Spinlocks Most device drivers have a per-device spinlock which is taken in the interrupt handler. With pin-based interrupts or a single MSI, it is not @@ -505,7 +190,7 @@ acquire the spinlock. Such deadlocks can be avoided by using spin_lock_irqsave() or spin_lock_irq() which disable local interrupts and acquire the lock (see Documentation/DocBook/kernel-locking). -4.6 How to tell whether MSI/MSI-X is enabled on a device +4.5 How to tell whether MSI/MSI-X is enabled on a device Using 'lspci -v' (as root) may show some devices with "MSI", "Message Signalled Interrupts" or "MSI-X" capabilities. Each of these capabilities diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 98ace67c5f4d..5e5ab478ea7d 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -4,6 +4,7 @@ * * Copyright (C) 2003-2004 Intel * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) + * Copyright (C) 2016 Christoph Hellwig. */ #include @@ -1121,6 +1122,94 @@ int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, } EXPORT_SYMBOL(pci_enable_msix_range); +/** + * pci_alloc_irq_vectors - allocate multiple IRQs for a device + * @dev: PCI device to operate on + * @min_vecs: minimum number of vectors required (must be >= 1) + * @max_vecs: maximum (desired) number of vectors + * @flags: flags or quirks for the allocation + * + * Allocate up to @max_vecs interrupt vectors for @dev, using MSI-X or MSI + * vectors if available, and fall back to a single legacy vector + * if neither is available. Return the number of vectors allocated, + * (which might be smaller than @max_vecs) if successful, or a negative + * error code on error. If less than @min_vecs interrupt vectors are + * available for @dev the function will fail with -ENOSPC. + * + * To get the Linux IRQ number used for a vector that can be passed to + * request_irq() use the pci_irq_vector() helper. + */ +int pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs, + unsigned int max_vecs, unsigned int flags) +{ + int vecs = -ENOSPC; + + if (!(flags & PCI_IRQ_NOMSIX)) { + vecs = pci_enable_msix_range(dev, NULL, min_vecs, max_vecs); + if (vecs > 0) + return vecs; + } + + if (!(flags & PCI_IRQ_NOMSI)) { + vecs = pci_enable_msi_range(dev, min_vecs, max_vecs); + if (vecs > 0) + return vecs; + } + + /* use legacy irq if allowed */ + if (!(flags & PCI_IRQ_NOLEGACY) && min_vecs == 1) + return 1; + return vecs; +} +EXPORT_SYMBOL(pci_alloc_irq_vectors); + +/** + * pci_free_irq_vectors - free previously allocated IRQs for a device + * @dev: PCI device to operate on + * + * Undoes the allocations and enabling in pci_alloc_irq_vectors(). + */ +void pci_free_irq_vectors(struct pci_dev *dev) +{ + pci_disable_msix(dev); + pci_disable_msi(dev); +} +EXPORT_SYMBOL(pci_free_irq_vectors); + +/** + * pci_irq_vector - return Linux IRQ number of a device vector + * @dev: PCI device to operate on + * @nr: device-relative interrupt vector index (0-based). + */ +int pci_irq_vector(struct pci_dev *dev, unsigned int nr) +{ + if (dev->msix_enabled) { + struct msi_desc *entry; + int i = 0; + + for_each_pci_msi_entry(entry, dev) { + if (i == nr) + return entry->irq; + i++; + } + WARN_ON_ONCE(1); + return -EINVAL; + } + + if (dev->msi_enabled) { + struct msi_desc *entry = first_pci_msi_entry(dev); + + if (WARN_ON_ONCE(nr >= entry->nvec_used)) + return -EINVAL; + } else { + if (WARN_ON_ONCE(nr > 0)) + return -EINVAL; + } + + return dev->irq + nr; +} +EXPORT_SYMBOL(pci_irq_vector); + struct pci_dev *msi_desc_to_pci_dev(struct msi_desc *desc) { return to_pci_dev(desc->dev); diff --git a/include/linux/pci.h b/include/linux/pci.h index b67e4df20801..52ecd49e8049 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1237,6 +1237,10 @@ resource_size_t pcibios_iov_resource_alignment(struct pci_dev *dev, int resno); int pci_set_vga_state(struct pci_dev *pdev, bool decode, unsigned int command_bits, u32 flags); +#define PCI_IRQ_NOLEGACY (1 << 0) /* don't use legacy interrupts */ +#define PCI_IRQ_NOMSI (1 << 1) /* don't use MSI interrupts */ +#define PCI_IRQ_NOMSIX (1 << 2) /* don't use MSI-X interrupts */ + /* kmem_cache style wrapper around pci_alloc_consistent() */ #include @@ -1284,6 +1288,11 @@ static inline int pci_enable_msix_exact(struct pci_dev *dev, return rc; return 0; } +int pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs, + unsigned int max_vecs, unsigned int flags); +void pci_free_irq_vectors(struct pci_dev *dev); +int pci_irq_vector(struct pci_dev *dev, unsigned int nr); + #else static inline int pci_msi_vec_count(struct pci_dev *dev) { return -ENOSYS; } static inline void pci_msi_shutdown(struct pci_dev *dev) { } @@ -1307,6 +1316,24 @@ static inline int pci_enable_msix_range(struct pci_dev *dev, static inline int pci_enable_msix_exact(struct pci_dev *dev, struct msix_entry *entries, int nvec) { return -ENOSYS; } +static inline int pci_alloc_irq_vectors(struct pci_dev *dev, + unsigned int min_vecs, unsigned int max_vecs, + unsigned int flags) +{ + if (min_vecs > 1) + return -EINVAL; + return 1; +} +static inline void pci_free_irq_vectors(struct pci_dev *dev) +{ +} + +static inline int pci_irq_vector(struct pci_dev *dev, unsigned int nr) +{ + if (WARN_ON_ONCE(nr > 0)) + return -EINVAL; + return dev->irq; +} #endif #ifdef CONFIG_PCIEPORTBUS -- cgit v1.2.3 From 4ef33685aa0957d771e068b60a5f3ca6b47ade1c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 12 Jul 2016 18:20:18 +0900 Subject: PCI: Spread interrupt vectors in pci_alloc_irq_vectors() Set the affinity_mask in the PCI device before allocating vectors so that the affinity can be propagated through the MSI descriptor structures to the core IRQ code. To facilitate this, new __pci_enable_msi_range() and __pci_enable_msix_range() helpers are factored out of their not prefixed variants which assigning the new IRQ affinity mask in the PCI device so that the low-level interrupt code can perform the interrupt affinity assignment and do node-local allocations. A new PCI_IRQ_NOAFFINITY flag is added to pci_alloc_irq_vectors() so that this function can also be used by drivers that don't wish to use the automatic affinity assignment. [bhelgaas: omit "else" after "return" consistently] Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas Reviewed-by: Alexander Gordeev --- Documentation/PCI/MSI-HOWTO.txt | 4 ++ drivers/pci/msi.c | 134 ++++++++++++++++++++++++++-------------- include/linux/pci.h | 2 + 3 files changed, 95 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index 0ac612b8c3fb..c55df2911136 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -99,6 +99,10 @@ PCI_IRQ_NOMSI and PCI_IRQ_NOMSIX flag in case a device claims to support MSI or MSI-X, but the support is broken, or to pass PCI_IRQ_NOLEGACY in case the device does not support legacy interrupt lines. +By default this function will spread the interrupts around the available +CPUs, but this feature can be disabled by passing the PCI_IRQ_NOAFFINITY +flag. + To get the Linux IRQ numbers passed to request_irq() and free_irq() and the vectors, use the following function: diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 5e5ab478ea7d..a02981efdad5 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -569,6 +569,7 @@ static struct msi_desc *msi_setup_entry(struct pci_dev *dev, int nvec) entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1; entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec)); entry->nvec_used = nvec; + entry->affinity = dev->irq_affinity; if (control & PCI_MSI_FLAGS_64BIT) entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64; @@ -680,10 +681,18 @@ static void __iomem *msix_map_region(struct pci_dev *dev, unsigned nr_entries) static int msix_setup_entries(struct pci_dev *dev, void __iomem *base, struct msix_entry *entries, int nvec) { + const struct cpumask *mask = NULL; struct msi_desc *entry; - int i; + int cpu = -1, i; for (i = 0; i < nvec; i++) { + if (dev->irq_affinity) { + cpu = cpumask_next(cpu, dev->irq_affinity); + if (cpu >= nr_cpu_ids) + cpu = cpumask_first(dev->irq_affinity); + mask = cpumask_of(cpu); + } + entry = alloc_msi_entry(&dev->dev); if (!entry) { if (!i) @@ -703,6 +712,7 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base, entry->msi_attrib.default_irq = dev->irq; entry->mask_base = base; entry->nvec_used = 1; + entry->affinity = mask; list_add_tail(&entry->list, dev_to_msi_list(&dev->dev)); } @@ -1028,19 +1038,8 @@ int pci_msi_enabled(void) } EXPORT_SYMBOL(pci_msi_enabled); -/** - * pci_enable_msi_range - configure device's MSI capability structure - * @dev: device to configure - * @minvec: minimal number of interrupts to configure - * @maxvec: maximum number of interrupts to configure - * - * This function tries to allocate a maximum possible number of interrupts in a - * range between @minvec and @maxvec. It returns a negative errno if an error - * occurs. If it succeeds, it returns the actual number of interrupts allocated - * and updates the @dev's irq member to the lowest new interrupt number; - * the other interrupt numbers allocated to this device are consecutive. - **/ -int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec) +static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec, + unsigned int flags) { int nvec; int rc; @@ -1063,25 +1062,85 @@ int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec) nvec = pci_msi_vec_count(dev); if (nvec < 0) return nvec; - else if (nvec < minvec) + if (nvec < minvec) return -EINVAL; - else if (nvec > maxvec) + + if (nvec > maxvec) nvec = maxvec; - do { + for (;;) { + if (!(flags & PCI_IRQ_NOAFFINITY)) { + dev->irq_affinity = irq_create_affinity_mask(&nvec); + if (nvec < minvec) + return -ENOSPC; + } + rc = msi_capability_init(dev, nvec); - if (rc < 0) { + if (rc == 0) + return nvec; + + kfree(dev->irq_affinity); + dev->irq_affinity = NULL; + + if (rc < 0) return rc; - } else if (rc > 0) { - if (rc < minvec) + if (rc < minvec) + return -ENOSPC; + + nvec = rc; + } +} + +/** + * pci_enable_msi_range - configure device's MSI capability structure + * @dev: device to configure + * @minvec: minimal number of interrupts to configure + * @maxvec: maximum number of interrupts to configure + * + * This function tries to allocate a maximum possible number of interrupts in a + * range between @minvec and @maxvec. It returns a negative errno if an error + * occurs. If it succeeds, it returns the actual number of interrupts allocated + * and updates the @dev's irq member to the lowest new interrupt number; + * the other interrupt numbers allocated to this device are consecutive. + **/ +int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec) +{ + return __pci_enable_msi_range(dev, minvec, maxvec, PCI_IRQ_NOAFFINITY); +} +EXPORT_SYMBOL(pci_enable_msi_range); + +static int __pci_enable_msix_range(struct pci_dev *dev, + struct msix_entry *entries, int minvec, int maxvec, + unsigned int flags) +{ + int nvec = maxvec; + int rc; + + if (maxvec < minvec) + return -ERANGE; + + for (;;) { + if (!(flags & PCI_IRQ_NOAFFINITY)) { + dev->irq_affinity = irq_create_affinity_mask(&nvec); + if (nvec < minvec) return -ENOSPC; - nvec = rc; } - } while (rc); - return nvec; + rc = pci_enable_msix(dev, entries, nvec); + if (rc == 0) + return nvec; + + kfree(dev->irq_affinity); + dev->irq_affinity = NULL; + + if (rc < 0) + return rc; + if (rc < minvec) + return -ENOSPC; + + nvec = rc; + } } -EXPORT_SYMBOL(pci_enable_msi_range); /** * pci_enable_msix_range - configure device's MSI-X capability structure @@ -1099,26 +1158,10 @@ EXPORT_SYMBOL(pci_enable_msi_range); * with new allocated MSI-X interrupts. **/ int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, - int minvec, int maxvec) + int minvec, int maxvec) { - int nvec = maxvec; - int rc; - - if (maxvec < minvec) - return -ERANGE; - - do { - rc = pci_enable_msix(dev, entries, nvec); - if (rc < 0) { - return rc; - } else if (rc > 0) { - if (rc < minvec) - return -ENOSPC; - nvec = rc; - } - } while (rc); - - return nvec; + return __pci_enable_msix_range(dev, entries, minvec, maxvec, + PCI_IRQ_NOAFFINITY); } EXPORT_SYMBOL(pci_enable_msix_range); @@ -1145,13 +1188,14 @@ int pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs, int vecs = -ENOSPC; if (!(flags & PCI_IRQ_NOMSIX)) { - vecs = pci_enable_msix_range(dev, NULL, min_vecs, max_vecs); + vecs = __pci_enable_msix_range(dev, NULL, min_vecs, max_vecs, + flags); if (vecs > 0) return vecs; } if (!(flags & PCI_IRQ_NOMSI)) { - vecs = pci_enable_msi_range(dev, min_vecs, max_vecs); + vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, flags); if (vecs > 0) return vecs; } diff --git a/include/linux/pci.h b/include/linux/pci.h index 52ecd49e8049..f1406619f868 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -320,6 +320,7 @@ struct pci_dev { * directly, use the values stored here. They might be different! */ unsigned int irq; + struct cpumask *irq_affinity; struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */ bool match_driver; /* Skip attaching driver */ @@ -1240,6 +1241,7 @@ int pci_set_vga_state(struct pci_dev *pdev, bool decode, #define PCI_IRQ_NOLEGACY (1 << 0) /* don't use legacy interrupts */ #define PCI_IRQ_NOMSI (1 << 1) /* don't use MSI interrupts */ #define PCI_IRQ_NOMSIX (1 << 2) /* don't use MSI-X interrupts */ +#define PCI_IRQ_NOAFFINITY (1 << 3) /* don't auto-assign affinity */ /* kmem_cache style wrapper around pci_alloc_consistent() */ -- cgit v1.2.3