From 90088bb41200b4da962282dfd45db82544adac3b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 9 Oct 2006 11:10:26 +0900 Subject: [PATCH] libata: move ata_irq_on() into libata-sff.c ata_irq_on() isn't used outside of libata core layer. The function is TF/SFF interface specific but currently used by core path with some hack too. Move it from include/linux/libata.h to drivers/ata/libata-sff.c. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 29 +++++++++++++++++++++++++++++ drivers/ata/libata.h | 3 +++ 2 files changed, 32 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index e178d6ae8b80..37471d3c1c28 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -38,6 +38,35 @@ #include "libata.h" +/** + * ata_irq_on - Enable interrupts on a port. + * @ap: Port on which interrupts are enabled. + * + * Enable interrupts on a legacy IDE device using MMIO or PIO, + * wait for idle, clear any pending interrupts. + * + * LOCKING: + * Inherited from caller. + */ +u8 ata_irq_on(struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 tmp; + + ap->ctl &= ~ATA_NIEN; + ap->last_ctl = ap->ctl; + + if (ap->flags & ATA_FLAG_MMIO) + writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); + else + outb(ap->ctl, ioaddr->ctl_addr); + tmp = ata_wait_idle(ap); + + ap->ops->irq_clear(ap); + + return tmp; +} + /** * ata_tf_load_pio - send taskfile registers to host controller * @ap: Port to which output is sent diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 0ed263be652a..c83300055ec5 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -120,4 +120,7 @@ extern void ata_scsi_error(struct Scsi_Host *host); extern void ata_port_wait_eh(struct ata_port *ap); extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); +/* libata-sff.c */ +extern u8 ata_irq_on(struct ata_port *ap); + #endif /* __LIBATA_H__ */ -- cgit v1.2.3