From c9bd0946da243a8eb86b44ff613e2c813f9b683b Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Date: Tue, 5 Jun 2018 18:59:57 +0200
Subject: dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity
Commit 0198d7bb8a0c ("ASoC: omap-mcbsp: Convert to use the sdma-pcm
instead of omap-pcm") resulted in broken audio playback on OMAP1510
(discovered on Amstrad Delta).
When running on OMAP1510, omap-pcm used to obtain DMA offset from
snd_dmaengine_pcm_pointer_no_residue() based on DMA interrupt triggered
software calculations instead of snd_dmaengine_pcm_pointer() which
depended on residue value calculated from omap_dma_get_src_pos().
Similar code path is still available in now used
sound/soc/soc-generic-dmaengine-pcm.c but it is not triggered.
It was verified already before that omap_get_dma_src_pos() from
arch/arm/plat-omap/dma.c didn't work correctly for OMAP1510 - see
commit 1bdd7419910c ("ASoC: OMAP: fix OMAP1510 broken PCM pointer
callback") for details. Apparently the same applies to its successor,
omap_dma_get_src_pos() from drivers/dma/ti/omap-dma.c.
On the other hand, snd_dmaengine_pcm_pointer_no_residue() is described
as depreciated and discouraged for use in new drivers because of its
unreliable accuracy. However, it seems the only working option for
OPAM1510 now, as long as a software calculated residue is not
implemented as OMAP1510 fallback in omap-dma.
Using snd_dmaengine_pcm_pointer_no_residue() code path instead of
snd_dmaengine_pcm_pointer() in sound/soc/soc-generic-dmaengine-pcm.c
can be triggered in two ways:
- by passing pcm->flags |= SND_DMAENGINE_PCM_FLAG_NO_RESIDUE from
sound/soc/omap/sdma-pcm.c,
- by passing dma_caps.residue_granularity =
DMA_RESIDUE_GRANULARITY_DESCRIPTOR from DMA engine.
Let's do the latter.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/dma/ti/omap-dma.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c
index 9b5ca8691f27..a4a931ddf6f6 100644
--- a/drivers/dma/ti/omap-dma.c
+++ b/drivers/dma/ti/omap-dma.c
@@ -1485,7 +1485,11 @@ static int omap_dma_probe(struct platform_device *pdev)
od->ddev.src_addr_widths = OMAP_DMA_BUSWIDTHS;
od->ddev.dst_addr_widths = OMAP_DMA_BUSWIDTHS;
od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
- od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+ if (__dma_omap15xx(od->plat->dma_attr))
+ od->ddev.residue_granularity =
+ DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+ else
+ od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
od->ddev.max_burst = SZ_16M - 1; /* CCEN: 24bit unsigned */
od->ddev.dev = &pdev->dev;
INIT_LIST_HEAD(&od->ddev.channels);
--
cgit v1.2.3
From e3f329c600033f011a978a8bc4ddb1e2e94c4f4d Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Tue, 19 Jun 2018 15:20:50 +0200
Subject: dmaengine: pl330: report BURST residue granularity
The reported residue is already calculated in BURST unit granularity, so
advertise this capability properly to other devices in the system.
Fixes: aee4d1fac887 ("dmaengine: pl330: improve pl330_tx_status() function")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/dma/pl330.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index defcdde4d358..de0957fe9668 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -3033,7 +3033,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
pd->src_addr_widths = PL330_DMA_BUSWIDTHS;
pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
- pd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
+ pd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
pd->max_burst = ((pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP) ?
1 : PL330_MAX_BURST);
--
cgit v1.2.3
From c4c2b7644cc9a41f17a8cc8904efe3f66ae4c7ed Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri, 22 Jun 2018 14:15:47 +0300
Subject: dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()
The d->chans[] array has d->dma_requests elements so the > should be
>= here.
Fixes: 8e6152bc660e ("dmaengine: Add hisilicon k3 DMA engine driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/dma/k3dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/dma/k3dma.c b/drivers/dma/k3dma.c
index fa31cccbe04f..6bfa217ed6d0 100644
--- a/drivers/dma/k3dma.c
+++ b/drivers/dma/k3dma.c
@@ -794,7 +794,7 @@ static struct dma_chan *k3_of_dma_simple_xlate(struct of_phandle_args *dma_spec,
struct k3_dma_dev *d = ofdma->of_dma_data;
unsigned int request = dma_spec->args[0];
- if (request > d->dma_requests)
+ if (request >= d->dma_requests)
return NULL;
return dma_get_slave_channel(&(d->chans[request].vc.chan));
--
cgit v1.2.3