From 07f438df22886432ff50772446768f65fbbf3ee0 Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Tue, 24 Mar 2015 14:02:34 +0000 Subject: ACPI / table: Use pr_debug() instead of pr_info() for MADT table scanning For a normal 8 cpu sockets system, it will up to 240 cpu threads (Xeon E7 v2 family for now), and we need 240 entries for local apic or local x2apic in MADT table, so it will be much verbose information printed with a slow uart console when system booted, this will be even worse with large system with 16/32 cpu sockets. This patch just use pr_debug() instead of pr_info() for ioapic/iosapic, local apic/x2apic/sapic structures when scanning the MADT table to remove those verbose information, but leave other structures unchanged. CC: Rafael J Wysocki Acked-by: Rafael J. Wysocki Acked-by: Olof Johansson Acked-by: Grant Likely Tested-by: Timur Tabi Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- drivers/acpi/tables.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index 93b81523a2fe..f4e5b888b98e 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -23,6 +23,8 @@ * */ +/* Uncomment next line to get verbose printout */ +/* #define DEBUG */ #define pr_fmt(fmt) "ACPI: " fmt #include @@ -61,9 +63,9 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) { struct acpi_madt_local_apic *p = (struct acpi_madt_local_apic *)header; - pr_info("LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n", - p->processor_id, p->id, - (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); + pr_debug("LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n", + p->processor_id, p->id, + (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); } break; @@ -71,9 +73,9 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) { struct acpi_madt_local_x2apic *p = (struct acpi_madt_local_x2apic *)header; - pr_info("X2APIC (apic_id[0x%02x] uid[0x%02x] %s)\n", - p->local_apic_id, p->uid, - (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); + pr_debug("X2APIC (apic_id[0x%02x] uid[0x%02x] %s)\n", + p->local_apic_id, p->uid, + (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); } break; @@ -81,8 +83,8 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) { struct acpi_madt_io_apic *p = (struct acpi_madt_io_apic *)header; - pr_info("IOAPIC (id[0x%02x] address[0x%08x] gsi_base[%d])\n", - p->id, p->address, p->global_irq_base); + pr_debug("IOAPIC (id[0x%02x] address[0x%08x] gsi_base[%d])\n", + p->id, p->address, p->global_irq_base); } break; @@ -155,9 +157,9 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) { struct acpi_madt_io_sapic *p = (struct acpi_madt_io_sapic *)header; - pr_info("IOSAPIC (id[0x%x] address[%p] gsi_base[%d])\n", - p->id, (void *)(unsigned long)p->address, - p->global_irq_base); + pr_debug("IOSAPIC (id[0x%x] address[%p] gsi_base[%d])\n", + p->id, (void *)(unsigned long)p->address, + p->global_irq_base); } break; @@ -165,9 +167,9 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) { struct acpi_madt_local_sapic *p = (struct acpi_madt_local_sapic *)header; - pr_info("LSAPIC (acpi_id[0x%02x] lsapic_id[0x%02x] lsapic_eid[0x%02x] %s)\n", - p->processor_id, p->id, p->eid, - (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); + pr_debug("LSAPIC (acpi_id[0x%02x] lsapic_id[0x%02x] lsapic_eid[0x%02x] %s)\n", + p->processor_id, p->id, p->eid, + (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); } break; -- cgit v1.2.3 From aafc65c731fe2e6020850cd87ba69e96aaf38649 Mon Sep 17 00:00:00 2001 From: Graeme Gregory Date: Tue, 24 Mar 2015 14:02:35 +0000 Subject: ACPI: add arm64 to the platforms that use ioremap Now with the base changes to the arm memory mapping it is safe to convert to using ioremap to map in the tables after acpi_gbl_permanent_mmap is set. CC: Rafael J Wysocki Tested-by: Robert Richter Tested-by: Timur Tabi Acked-by: Robert Richter Acked-by: Rafael J. Wysocki Reviewed-by: Grant Likely Signed-off-by: Al Stone Signed-off-by: Graeme Gregory Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- drivers/acpi/osl.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index f9eeae871593..39748bb3a543 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -336,11 +336,11 @@ acpi_map_lookup_virt(void __iomem *virt, acpi_size size) return NULL; } -#ifndef CONFIG_IA64 -#define should_use_kmap(pfn) page_is_ram(pfn) -#else +#if defined(CONFIG_IA64) || defined(CONFIG_ARM64) /* ioremap will take care of cache attributes */ #define should_use_kmap(pfn) 0 +#else +#define should_use_kmap(pfn) page_is_ram(pfn) #endif static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz) -- cgit v1.2.3 From 6e0a0ea12962a2175a9f47621f9fe7a4c866cb12 Mon Sep 17 00:00:00 2001 From: Graeme Gregory Date: Tue, 24 Mar 2015 14:02:39 +0000 Subject: ACPI / sleep: Introduce CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT ACPI 5.1 does not currently support S states for ARM64 hardware but ACPI code will call acpi_target_system_state() and acpi_sleep_init() for device power management, so introduce CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT and select it for x86 and ia64 only to make sleep functions available, and also introduce stub function to allow other drivers to function until S states are defined for ARM64. It will be no functional change for x86 and IA64. Suggested-by: Rafael J. Wysocki Acked-by: Lorenzo Pieralisi Acked-by: Rafael J. Wysocki Signed-off-by: Graeme Gregory Signed-off-by: Tomasz Nowicki Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- arch/ia64/Kconfig | 1 + arch/x86/Kconfig | 1 + drivers/acpi/Kconfig | 4 ++++ drivers/acpi/Makefile | 2 +- drivers/acpi/internal.h | 4 ++++ 5 files changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 074e52bf815c..cc3414fda362 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -10,6 +10,7 @@ config IA64 select ARCH_MIGHT_HAVE_PC_SERIO select PCI if (!IA64_HP_SIM) select ACPI if (!IA64_HP_SIM) + select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_IDE diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index b7d31ca55187..c3ea9f9a29d1 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -22,6 +22,7 @@ config X86_64 ### Arch settings config X86 def_bool y + select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS select ARCH_HAS_FAST_MULTIPLIER diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index e6c3ddd92665..a726381fea72 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -48,9 +48,13 @@ config ACPI_LEGACY_TABLES_LOOKUP config ARCH_MIGHT_HAVE_ACPI_PDC bool +config ACPI_SYSTEM_POWER_STATES_SUPPORT + bool + config ACPI_SLEEP bool depends on SUSPEND || HIBERNATION + depends on ACPI_SYSTEM_POWER_STATES_SUPPORT default y config ACPI_PROCFS_POWER diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 623b117ad1a2..db153c6a75d7 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -23,7 +23,7 @@ acpi-y += nvs.o # Power management related files acpi-y += wakeup.o -acpi-y += sleep.o +acpi-$(CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT) += sleep.o acpi-y += device_pm.o acpi-$(CONFIG_ACPI_SLEEP) += proc.o diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 56b321aa2b1c..ba4a61e964be 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -161,7 +161,11 @@ void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit); /*-------------------------------------------------------------------------- Suspend/Resume -------------------------------------------------------------------------- */ +#ifdef CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT extern int acpi_sleep_init(void); +#else +static inline int acpi_sleep_init(void) { return -ENXIO; } +#endif #ifdef CONFIG_ACPI_SLEEP int acpi_sleep_proc_init(void); -- cgit v1.2.3 From 4c1c8d7a7ebc8b909493a14b21b233e5377b69aa Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Tue, 24 Mar 2015 14:02:44 +0000 Subject: ACPI / table: Print GIC information when MADT is parsed When MADT is parsed, print GIC information as debug message: ACPI: GICC (acpi_id[0x0000] address[00000000e112f000] MPIDR[0x0] enabled) ACPI: GICC (acpi_id[0x0001] address[00000000e112f000] MPIDR[0x1] enabled) ... ACPI: GICC (acpi_id[0x0201] address[00000000e112f000] MPIDR[0x201] enabled) This debug information will be very helpful to bring up early systems to see if acpi_id and MPIDR are matched or not as spec defined. CC: Rafael J. Wysocki Tested-by: Suravee Suthikulpanit Tested-by: Yijing Wang Tested-by: Mark Langsdorf Tested-by: Jon Masters Tested-by: Timur Tabi Tested-by: Robert Richter Acked-by: Robert Richter Acked-by: Sudeep Holla Acked-by: Rafael J. Wysocki Acked-by: Lorenzo Pieralisi Acked-by: Grant Likely Signed-off-by: Hanjun Guo Signed-off-by: Tomasz Nowicki Signed-off-by: Will Deacon --- drivers/acpi/tables.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index f4e5b888b98e..2e19189da0ee 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -185,6 +185,28 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) } break; + case ACPI_MADT_TYPE_GENERIC_INTERRUPT: + { + struct acpi_madt_generic_interrupt *p = + (struct acpi_madt_generic_interrupt *)header; + pr_debug("GICC (acpi_id[0x%04x] address[%llx] MPIDR[0x%llx] %s)\n", + p->uid, p->base_address, + p->arm_mpidr, + (p->flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); + + } + break; + + case ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR: + { + struct acpi_madt_generic_distributor *p = + (struct acpi_madt_generic_distributor *)header; + pr_debug("GIC Distributor (gic_id[0x%04x] address[%llx] gsi_base[%d])\n", + p->gic_id, p->base_address, + p->global_irq_base); + } + break; + default: pr_warn("Found unsupported MADT entry (type = 0x%x)\n", header->type); -- cgit v1.2.3 From 828aef376d7a129547bc4ebb949965040177e3da Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 24 Mar 2015 14:02:46 +0000 Subject: ACPI / processor: Introduce phys_cpuid_t for CPU hardware ID CPU hardware ID (phys_id) is defined as u32 in structure acpi_processor, but phys_id is used as int in acpi processor driver, so it will lead to some inconsistence for the drivers. Furthermore, to cater for ACPI arch ports that implement 64 bits CPU ids a generic CPU physical id type is required. So introduce typedef u32 phys_cpuid_t in a common file, and introduce a macro PHYS_CPUID_INVALID as (phys_cpuid_t)(-1) if it's not defined by other archs, this will solve the inconsistence in acpi processor driver, and will prepare for the ACPI on ARM64 for the 64 bit CPU hardware ID in the following patch. CC: Rafael J Wysocki Suggested-by: Lorenzo Pieralisi Reviewed-by: Grant Likely Acked-by: Sudeep Holla Acked-by: Lorenzo Pieralisi Acked-by: Rafael J. Wysocki Signed-off-by: Catalin Marinas [hj: reworked cpu physid map return codes] Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- arch/ia64/kernel/acpi.c | 2 +- arch/x86/kernel/acpi/boot.c | 2 +- drivers/acpi/acpi_processor.c | 7 ++++--- drivers/acpi/processor_core.c | 30 +++++++++++++++--------------- include/acpi/processor.h | 6 +++--- include/linux/acpi.h | 7 ++++++- 6 files changed, 30 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 2c4498919d3c..067ef4439fa4 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -887,7 +887,7 @@ static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) } /* wrapper to silence section mismatch warning */ -int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu) +int __ref acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu) { return _acpi_map_lsapic(handle, physid, pcpu); } diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 3d525c6124f6..e4f8582eb756 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -757,7 +757,7 @@ static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) } /* wrapper to silence section mismatch warning */ -int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu) +int __ref acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu) { return _acpi_map_lsapic(handle, physid, pcpu); } diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index 1020b1b53a17..58f335ca2e75 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -170,7 +170,7 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr) acpi_status status; int ret; - if (pr->phys_id == -1) + if (pr->phys_id == PHYS_CPUID_INVALID) return -ENODEV; status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta); @@ -215,7 +215,8 @@ static int acpi_processor_get_info(struct acpi_device *device) union acpi_object object = { 0 }; struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; struct acpi_processor *pr = acpi_driver_data(device); - int phys_id, cpu_index, device_declaration = 0; + phys_cpuid_t phys_id; + int cpu_index, device_declaration = 0; acpi_status status = AE_OK; static int cpu0_initialized; unsigned long long value; @@ -263,7 +264,7 @@ static int acpi_processor_get_info(struct acpi_device *device) } phys_id = acpi_get_phys_id(pr->handle, device_declaration, pr->acpi_id); - if (phys_id < 0) + if (phys_id == PHYS_CPUID_INVALID) acpi_handle_debug(pr->handle, "failed to get CPU physical ID.\n"); pr->phys_id = phys_id; diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 7962651cdbd4..51cc29909e08 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -32,7 +32,7 @@ static struct acpi_table_madt *get_madt_table(void) } static int map_lapic_id(struct acpi_subtable_header *entry, - u32 acpi_id, int *apic_id) + u32 acpi_id, phys_cpuid_t *apic_id) { struct acpi_madt_local_apic *lapic = container_of(entry, struct acpi_madt_local_apic, header); @@ -48,7 +48,7 @@ static int map_lapic_id(struct acpi_subtable_header *entry, } static int map_x2apic_id(struct acpi_subtable_header *entry, - int device_declaration, u32 acpi_id, int *apic_id) + int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id) { struct acpi_madt_local_x2apic *apic = container_of(entry, struct acpi_madt_local_x2apic, header); @@ -65,7 +65,7 @@ static int map_x2apic_id(struct acpi_subtable_header *entry, } static int map_lsapic_id(struct acpi_subtable_header *entry, - int device_declaration, u32 acpi_id, int *apic_id) + int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id) { struct acpi_madt_local_sapic *lsapic = container_of(entry, struct acpi_madt_local_sapic, header); @@ -83,10 +83,10 @@ static int map_lsapic_id(struct acpi_subtable_header *entry, return 0; } -static int map_madt_entry(int type, u32 acpi_id) +static phys_cpuid_t map_madt_entry(int type, u32 acpi_id) { unsigned long madt_end, entry; - int phys_id = -1; /* CPU hardware ID */ + phys_cpuid_t phys_id = PHYS_CPUID_INVALID; /* CPU hardware ID */ struct acpi_table_madt *madt; madt = get_madt_table(); @@ -117,12 +117,12 @@ static int map_madt_entry(int type, u32 acpi_id) return phys_id; } -static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id) +static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; struct acpi_subtable_header *header; - int phys_id = -1; + phys_cpuid_t phys_id = PHYS_CPUID_INVALID; if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) goto exit; @@ -149,27 +149,27 @@ exit: return phys_id; } -int acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id) +phys_cpuid_t acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id) { - int phys_id; + phys_cpuid_t phys_id; phys_id = map_mat_entry(handle, type, acpi_id); - if (phys_id == -1) + if (phys_id == PHYS_CPUID_INVALID) phys_id = map_madt_entry(type, acpi_id); return phys_id; } -int acpi_map_cpuid(int phys_id, u32 acpi_id) +int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id) { #ifdef CONFIG_SMP int i; #endif - if (phys_id == -1) { + if (phys_id == PHYS_CPUID_INVALID) { /* * On UP processor, there is no _MAT or MADT table. - * So above phys_id is always set to -1. + * So above phys_id is always set to PHYS_CPUID_INVALID. * * BIOS may define multiple CPU handles even for UP processor. * For example, @@ -190,7 +190,7 @@ int acpi_map_cpuid(int phys_id, u32 acpi_id) if (nr_cpu_ids <= 1 && acpi_id == 0) return acpi_id; else - return phys_id; + return -1; } #ifdef CONFIG_SMP @@ -208,7 +208,7 @@ int acpi_map_cpuid(int phys_id, u32 acpi_id) int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id) { - int phys_id; + phys_cpuid_t phys_id; phys_id = acpi_get_phys_id(handle, type, acpi_id); diff --git a/include/acpi/processor.h b/include/acpi/processor.h index b95dc32a6e6b..4188a4d3b597 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -196,7 +196,7 @@ struct acpi_processor_flags { struct acpi_processor { acpi_handle handle; u32 acpi_id; - u32 phys_id; /* CPU hardware ID such as APIC ID for x86 */ + phys_cpuid_t phys_id; /* CPU hardware ID such as APIC ID for x86 */ u32 id; /* CPU logical ID allocated by OS */ u32 pblk; int performance_platform_limit; @@ -310,8 +310,8 @@ static inline int acpi_processor_get_bios_limit(int cpu, unsigned int *limit) #endif /* CONFIG_CPU_FREQ */ /* in processor_core.c */ -int acpi_get_phys_id(acpi_handle, int type, u32 acpi_id); -int acpi_map_cpuid(int phys_id, u32 acpi_id); +phys_cpuid_t acpi_get_phys_id(acpi_handle, int type, u32 acpi_id); +int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id); int acpi_get_cpuid(acpi_handle, int type, u32 acpi_id); /* in processor_pdc.c */ diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 24c7aa8b1d20..6ec33c595aea 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -146,9 +146,14 @@ void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa); int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma); void acpi_numa_arch_fixup(void); +#ifndef PHYS_CPUID_INVALID +typedef u32 phys_cpuid_t; +#define PHYS_CPUID_INVALID (phys_cpuid_t)(-1) +#endif + #ifdef CONFIG_ACPI_HOTPLUG_CPU /* Arch dependent functions for cpu hotplug support */ -int acpi_map_cpu(acpi_handle handle, int physid, int *pcpu); +int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu); int acpi_unmap_cpu(int cpu); #endif /* CONFIG_ACPI_HOTPLUG_CPU */ -- cgit v1.2.3 From 020295b4cb5b7d510ea1f4531a502c3f8a2380c5 Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Tue, 24 Mar 2015 14:02:47 +0000 Subject: ACPI / processor: Make it possible to get CPU hardware ID via GICC Introduce a new function map_gicc_mpidr() to allow MPIDRs to be obtained from the GICC Structure introduced by ACPI 5.1, since MPIDR for ARM64 is 64-bit, so typedef u64 for phys_cpuid_t. The ARM architecture defines the MPIDR register as the CPU hardware identifier. This patch adds the code infrastructure to retrieve the MPIDR values from the ARM ACPI GICC structure in order to look-up the kernel CPU hardware ids required by the ACPI core code to identify CPUs. CC: Rafael J. Wysocki CC: Catalin Marinas CC: Will Deacon Tested-by: Suravee Suthikulpanit Tested-by: Yijing Wang Tested-by: Mark Langsdorf Tested-by: Jon Masters Tested-by: Timur Tabi Tested-by: Robert Richter Acked-by: Robert Richter Acked-by: Lorenzo Pieralisi Acked-by: Rafael J. Wysocki Reviewed-by: Grant Likely Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- arch/arm64/include/asm/acpi.h | 12 ++++++++++++ drivers/acpi/processor_core.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+) (limited to 'drivers') diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index 9719921aedb1..eea0bc3b09d5 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -13,6 +13,8 @@ #define _ASM_ACPI_H #include +#include +#include /* Basic configuration for ACPI */ #ifdef CONFIG_ACPI @@ -27,6 +29,9 @@ static inline void __iomem *acpi_os_ioremap(acpi_physical_address phys, } #define acpi_os_ioremap acpi_os_ioremap +typedef u64 phys_cpuid_t; +#define PHYS_CPUID_INVALID INVALID_HWID + #define acpi_strict 1 /* No out-of-spec workarounds on ARM64 */ extern int acpi_disabled; extern int acpi_noirq; @@ -58,6 +63,13 @@ static inline void enable_acpi(void) acpi_noirq = 0; } +/* + * The ACPI processor driver for ACPI core code needs this macro + * to find out this cpu was already mapped (mapping from CPU hardware + * ID to CPU logical ID) or not. + */ +#define cpu_physical_id(cpu) cpu_logical_map(cpu) + /* * It's used from ACPI core in kdump to boot UP system with SMP kernel, * with this check the ACPI core will not override the CPU index diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 51cc29909e08..b1ec78b8a645 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -83,6 +83,31 @@ static int map_lsapic_id(struct acpi_subtable_header *entry, return 0; } +/* + * Retrieve the ARM CPU physical identifier (MPIDR) + */ +static int map_gicc_mpidr(struct acpi_subtable_header *entry, + int device_declaration, u32 acpi_id, phys_cpuid_t *mpidr) +{ + struct acpi_madt_generic_interrupt *gicc = + container_of(entry, struct acpi_madt_generic_interrupt, header); + + if (!(gicc->flags & ACPI_MADT_ENABLED)) + return -ENODEV; + + /* device_declaration means Device object in DSDT, in the + * GIC interrupt model, logical processors are required to + * have a Processor Device object in the DSDT, so we should + * check device_declaration here + */ + if (device_declaration && (gicc->uid == acpi_id)) { + *mpidr = gicc->arm_mpidr; + return 0; + } + + return -EINVAL; +} + static phys_cpuid_t map_madt_entry(int type, u32 acpi_id) { unsigned long madt_end, entry; @@ -111,6 +136,9 @@ static phys_cpuid_t map_madt_entry(int type, u32 acpi_id) } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { if (!map_lsapic_id(header, type, acpi_id, &phys_id)) break; + } else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) { + if (!map_gicc_mpidr(header, type, acpi_id, &phys_id)) + break; } entry += header->length; } @@ -143,6 +171,8 @@ static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id) map_lsapic_id(header, type, acpi_id, &phys_id); else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) map_x2apic_id(header, type, acpi_id, &phys_id); + else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) + map_gicc_mpidr(header, type, acpi_id, &phys_id); exit: kfree(buffer.pointer); -- cgit v1.2.3 From fbe61ec71ac975279cd47b6c299d5e33f63aac4e Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Tue, 24 Mar 2015 14:02:48 +0000 Subject: ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi Introduce ACPI_IRQ_MODEL_GIC which is needed for ARM64 as GIC is used, and then register device's gsi with the core IRQ subsystem. acpi_register_gsi() is similar to DT based irq_of_parse_and_map(), since gsi is unique in the system, so use hwirq number directly for the mapping. We are going to implement stacked domains when GICv2m, GICv3, ITS support are added. CC: Marc Zyngier Originally-by: Amit Daniel Kachhap Tested-by: Suravee Suthikulpanit Tested-by: Yijing Wang Tested-by: Mark Langsdorf Tested-by: Jon Masters Tested-by: Timur Tabi Tested-by: Robert Richter Acked-by: Robert Richter Acked-by: Rafael J. Wysocki Reviewed-by: Grant Likely Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- arch/arm64/kernel/acpi.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/acpi/bus.c | 3 ++ include/linux/acpi.h | 1 + 3 files changed, 77 insertions(+) (limited to 'drivers') diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index c9203c0a1179..dec6f8aed3dc 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -75,6 +75,12 @@ static int __init dt_scan_depth1_nodes(unsigned long node, return 0; } +/* + * Since we're on ARM, the default interrupt routing model + * clearly has to be GIC. + */ +enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_GIC; + /* * __acpi_map_table() will be called before page_init(), so early_ioremap() * or early_memremap() should be called here to for ACPI table mapping. @@ -218,6 +224,73 @@ void __init acpi_init_cpus(void) pr_info("%d CPUs enabled, %d CPUs total\n", enabled_cpus, total_cpus); } +int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) +{ + *irq = irq_find_mapping(NULL, gsi); + + return 0; +} +EXPORT_SYMBOL_GPL(acpi_gsi_to_irq); + +/* + * success: return IRQ number (>0) + * failure: return =< 0 + */ +int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) +{ + unsigned int irq; + unsigned int irq_type; + + /* + * ACPI have no bindings to indicate SPI or PPI, so we + * use different mappings from DT in ACPI. + * + * For FDT + * PPI interrupt: in the range [0, 15]; + * SPI interrupt: in the range [0, 987]; + * + * For ACPI, GSI should be unique so using + * the hwirq directly for the mapping: + * PPI interrupt: in the range [16, 31]; + * SPI interrupt: in the range [32, 1019]; + */ + + if (trigger == ACPI_EDGE_SENSITIVE && + polarity == ACPI_ACTIVE_LOW) + irq_type = IRQ_TYPE_EDGE_FALLING; + else if (trigger == ACPI_EDGE_SENSITIVE && + polarity == ACPI_ACTIVE_HIGH) + irq_type = IRQ_TYPE_EDGE_RISING; + else if (trigger == ACPI_LEVEL_SENSITIVE && + polarity == ACPI_ACTIVE_LOW) + irq_type = IRQ_TYPE_LEVEL_LOW; + else if (trigger == ACPI_LEVEL_SENSITIVE && + polarity == ACPI_ACTIVE_HIGH) + irq_type = IRQ_TYPE_LEVEL_HIGH; + else + irq_type = IRQ_TYPE_NONE; + + /* + * Since only one GIC is supported in ACPI 5.0, we can + * create mapping refer to the default domain + */ + irq = irq_create_mapping(NULL, gsi); + if (!irq) + return irq; + + /* Set irq type if specified and different than the current one */ + if (irq_type != IRQ_TYPE_NONE && + irq_type != irq_get_trigger_type(irq)) + irq_set_irq_type(irq, irq_type); + return irq; +} +EXPORT_SYMBOL_GPL(acpi_register_gsi); + +void acpi_unregister_gsi(u32 gsi) +{ +} +EXPORT_SYMBOL_GPL(acpi_unregister_gsi); + static int __init acpi_parse_fadt(struct acpi_table_header *table) { struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table; diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 8b67bd0f6bb5..c412fdb28d34 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -448,6 +448,9 @@ static int __init acpi_bus_init_irq(void) case ACPI_IRQ_MODEL_IOSAPIC: message = "IOSAPIC"; break; + case ACPI_IRQ_MODEL_GIC: + message = "GIC"; + break; case ACPI_IRQ_MODEL_PLATFORM: message = "platform specific model"; break; diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 6ec33c595aea..de4e86f89c83 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -73,6 +73,7 @@ enum acpi_irq_model_id { ACPI_IRQ_MODEL_IOAPIC, ACPI_IRQ_MODEL_IOSAPIC, ACPI_IRQ_MODEL_PLATFORM, + ACPI_IRQ_MODEL_GIC, ACPI_IRQ_MODEL_COUNT }; -- cgit v1.2.3 From d60fc3892c4de4a25658786f941690462c5a5bab Mon Sep 17 00:00:00 2001 From: Tomasz Nowicki Date: Tue, 24 Mar 2015 14:02:49 +0000 Subject: irqchip: Add GICv2 specific ACPI boot support ACPI kernel uses MADT table for proper GIC initialization. It needs to parse GIC related subtables, collect CPU interface and distributor addresses and call driver initialization function (which is hardware abstraction agnostic). In a similar way, FDT initialize GICv1/2. NOTE: This commit allow to initialize GICv1/2 basic functionality. While now simple GICv2 init call is used, any further GIC features require generic infrastructure for proper ACPI irqchip initialization. That mechanism and stacked irqdomains to support GICv2 MSI/virtualization extension, GICv3/4 and its ITS are considered as next steps. CC: Jason Cooper CC: Marc Zyngier CC: Thomas Gleixner Tested-by: Suravee Suthikulpanit Tested-by: Yijing Wang Tested-by: Mark Langsdorf Tested-by: Jon Masters Tested-by: Timur Tabi Tested-by: Robert Richter Acked-by: Robert Richter Acked-by: Marc Zyngier Acked-by: Jason Cooper Reviewed-by: Grant Likely Signed-off-by: Tomasz Nowicki Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- arch/arm64/include/asm/acpi.h | 2 + arch/arm64/include/asm/irq.h | 13 +++++ arch/arm64/kernel/acpi.c | 25 +++++++++ drivers/irqchip/irq-gic.c | 102 +++++++++++++++++++++++++++++++++++ drivers/irqchip/irqchip.c | 3 ++ include/linux/acpi_irq.h | 10 ++++ include/linux/irqchip/arm-gic-acpi.h | 31 +++++++++++ 7 files changed, 186 insertions(+) create mode 100644 include/linux/acpi_irq.h create mode 100644 include/linux/irqchip/arm-gic-acpi.h (limited to 'drivers') diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index eea0bc3b09d5..59c05d8ea4a0 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -13,6 +13,8 @@ #define _ASM_ACPI_H #include +#include + #include #include diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h index 94c53674a31d..bbb251b14746 100644 --- a/arch/arm64/include/asm/irq.h +++ b/arch/arm64/include/asm/irq.h @@ -1,6 +1,8 @@ #ifndef __ASM_IRQ_H #define __ASM_IRQ_H +#include + #include struct pt_regs; @@ -8,4 +10,15 @@ struct pt_regs; extern void migrate_irqs(void); extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); +static inline void acpi_irq_init(void) +{ + /* + * Hardcode ACPI IRQ chip initialization to GICv2 for now. + * Proper irqchip infrastructure will be implemented along with + * incoming GICv2m|GICv3|ITS bits. + */ + acpi_gic_init(); +} +#define acpi_irq_init acpi_irq_init + #endif diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index dec6f8aed3dc..6468f8898530 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -359,3 +359,28 @@ void __init acpi_boot_table_init(void) pr_err("Can't find FADT\n"); } } + +void __init acpi_gic_init(void) +{ + struct acpi_table_header *table; + acpi_status status; + acpi_size tbl_size; + int err; + + if (acpi_disabled) + return; + + status = acpi_get_table_with_size(ACPI_SIG_MADT, 0, &table, &tbl_size); + if (ACPI_FAILURE(status)) { + const char *msg = acpi_format_exception(status); + + pr_err("Failed to get MADT table, %s\n", msg); + return; + } + + err = gic_v2_acpi_init(table); + if (err) + pr_err("Failed to initialize GIC IRQ controller"); + + early_acpi_os_unmap_memory((char *)table, tbl_size); +} diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 471e1cdc1933..d15a36a93c52 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -33,12 +33,14 @@ #include #include #include +#include #include #include #include #include #include #include +#include #include #include @@ -1090,3 +1092,103 @@ IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init); IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init); #endif + +#ifdef CONFIG_ACPI +static phys_addr_t dist_phy_base, cpu_phy_base __initdata; + +static int __init +gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header, + const unsigned long end) +{ + struct acpi_madt_generic_interrupt *processor; + phys_addr_t gic_cpu_base; + static int cpu_base_assigned; + + processor = (struct acpi_madt_generic_interrupt *)header; + + if (BAD_MADT_ENTRY(processor, end)) + return -EINVAL; + + /* + * There is no support for non-banked GICv1/2 register in ACPI spec. + * All CPU interface addresses have to be the same. + */ + gic_cpu_base = processor->base_address; + if (cpu_base_assigned && gic_cpu_base != cpu_phy_base) + return -EINVAL; + + cpu_phy_base = gic_cpu_base; + cpu_base_assigned = 1; + return 0; +} + +static int __init +gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header, + const unsigned long end) +{ + struct acpi_madt_generic_distributor *dist; + + dist = (struct acpi_madt_generic_distributor *)header; + + if (BAD_MADT_ENTRY(dist, end)) + return -EINVAL; + + dist_phy_base = dist->base_address; + return 0; +} + +int __init +gic_v2_acpi_init(struct acpi_table_header *table) +{ + void __iomem *cpu_base, *dist_base; + int count; + + /* Collect CPU base addresses */ + count = acpi_parse_entries(ACPI_SIG_MADT, + sizeof(struct acpi_table_madt), + gic_acpi_parse_madt_cpu, table, + ACPI_MADT_TYPE_GENERIC_INTERRUPT, 0); + if (count <= 0) { + pr_err("No valid GICC entries exist\n"); + return -EINVAL; + } + + /* + * Find distributor base address. We expect one distributor entry since + * ACPI 5.1 spec neither support multi-GIC instances nor GIC cascade. + */ + count = acpi_parse_entries(ACPI_SIG_MADT, + sizeof(struct acpi_table_madt), + gic_acpi_parse_madt_distributor, table, + ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, 0); + if (count <= 0) { + pr_err("No valid GICD entries exist\n"); + return -EINVAL; + } else if (count > 1) { + pr_err("More than one GICD entry detected\n"); + return -EINVAL; + } + + cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE); + if (!cpu_base) { + pr_err("Unable to map GICC registers\n"); + return -ENOMEM; + } + + dist_base = ioremap(dist_phy_base, ACPI_GICV2_DIST_MEM_SIZE); + if (!dist_base) { + pr_err("Unable to map GICD registers\n"); + iounmap(cpu_base); + return -ENOMEM; + } + + /* + * Initialize zero GIC instance (no multi-GIC support). Also, set GIC + * as default IRQ domain to allow for GSI registration and GSI to IRQ + * number translation (see acpi_register_gsi() and acpi_gsi_to_irq()). + */ + gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL); + irq_set_default_host(gic_data[0].domain); + return 0; +} +#endif diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c index 0fe2f718d81c..afd1af3dfe5a 100644 --- a/drivers/irqchip/irqchip.c +++ b/drivers/irqchip/irqchip.c @@ -8,6 +8,7 @@ * warranty of any kind, whether express or implied. */ +#include #include #include #include @@ -26,4 +27,6 @@ extern struct of_device_id __irqchip_of_table[]; void __init irqchip_init(void) { of_irq_init(__irqchip_of_table); + + acpi_irq_init(); } diff --git a/include/linux/acpi_irq.h b/include/linux/acpi_irq.h new file mode 100644 index 000000000000..f10c87265855 --- /dev/null +++ b/include/linux/acpi_irq.h @@ -0,0 +1,10 @@ +#ifndef _LINUX_ACPI_IRQ_H +#define _LINUX_ACPI_IRQ_H + +#include + +#ifndef acpi_irq_init +static inline void acpi_irq_init(void) { } +#endif + +#endif /* _LINUX_ACPI_IRQ_H */ diff --git a/include/linux/irqchip/arm-gic-acpi.h b/include/linux/irqchip/arm-gic-acpi.h new file mode 100644 index 000000000000..de3419ed3937 --- /dev/null +++ b/include/linux/irqchip/arm-gic-acpi.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2014, Linaro Ltd. + * Author: Tomasz Nowicki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARM_GIC_ACPI_H_ +#define ARM_GIC_ACPI_H_ + +#ifdef CONFIG_ACPI + +/* + * Hard code here, we can not get memory size from MADT (but FDT does), + * Actually no need to do that, because this size can be inferred + * from GIC spec. + */ +#define ACPI_GICV2_DIST_MEM_SIZE (SZ_4K) +#define ACPI_GIC_CPU_IF_MEM_SIZE (SZ_8K) + +struct acpi_table_header; + +int gic_v2_acpi_init(struct acpi_table_header *table); +void acpi_gic_init(void); +#else +static inline void acpi_gic_init(void) { } +#endif + +#endif /* ARM_GIC_ACPI_H_ */ -- cgit v1.2.3 From b09ca1ecf6d499d5a33f978c905d2fbcc79b55d9 Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Tue, 24 Mar 2015 14:02:50 +0000 Subject: clocksource / arch_timer: Parse GTDT to initialize arch timer Using the information presented by GTDT (Generic Timer Description Table) to initialize the arch timer (not memory-mapped). CC: Daniel Lezcano CC: Thomas Gleixner Originally-by: Amit Daniel Kachhap Tested-by: Suravee Suthikulpanit Tested-by: Yijing Wang Tested-by: Mark Langsdorf Tested-by: Jon Masters Tested-by: Timur Tabi Tested-by: Robert Richter Acked-by: Robert Richter Acked-by: Daniel Lezcano Reviewed-by: Grant Likely Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- arch/arm64/kernel/time.c | 7 ++ drivers/clocksource/arm_arch_timer.c | 132 ++++++++++++++++++++++++++++------- include/linux/clocksource.h | 6 ++ 3 files changed, 118 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c index 1a7125c3099b..42f9195cf2f8 100644 --- a/arch/arm64/kernel/time.c +++ b/arch/arm64/kernel/time.c @@ -35,6 +35,7 @@ #include #include #include +#include #include @@ -72,6 +73,12 @@ void __init time_init(void) tick_setup_hrtimer_broadcast(); + /* + * Since ACPI or FDT will only one be available in the system, + * we can use acpi_generic_timer_init() here safely + */ + acpi_generic_timer_init(); + arch_timer_rate = arch_timer_get_rate(); if (!arch_timer_rate) panic("Unable to initialise architected timer.\n"); diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index a3025e7ae35f..ea62fc79e1e8 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -371,8 +372,12 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np) if (arch_timer_rate) return; - /* Try to determine the frequency from the device tree or CNTFRQ */ - if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) { + /* + * Try to determine the frequency from the device tree or CNTFRQ, + * if ACPI is enabled, get the frequency from CNTFRQ ONLY. + */ + if (!acpi_disabled || + of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) { if (cntbase) arch_timer_rate = readl_relaxed(cntbase + CNTFRQ); else @@ -691,28 +696,8 @@ static void __init arch_timer_common_init(void) arch_timer_arch_init(); } -static void __init arch_timer_init(struct device_node *np) +static void __init arch_timer_init(void) { - int i; - - if (arch_timers_present & ARCH_CP15_TIMER) { - pr_warn("arch_timer: multiple nodes in dt, skipping\n"); - return; - } - - arch_timers_present |= ARCH_CP15_TIMER; - for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) - arch_timer_ppi[i] = irq_of_parse_and_map(np, i); - arch_timer_detect_rate(NULL, np); - - /* - * If we cannot rely on firmware initializing the timer registers then - * we should use the physical timers instead. - */ - if (IS_ENABLED(CONFIG_ARM) && - of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) - arch_timer_use_virtual = false; - /* * If HYP mode is available, we know that the physical timer * has been configured to be accessible from PL1. Use it, so @@ -731,13 +716,39 @@ static void __init arch_timer_init(struct device_node *np) } } - arch_timer_c3stop = !of_property_read_bool(np, "always-on"); - arch_timer_register(); arch_timer_common_init(); } -CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_init); -CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_init); + +static void __init arch_timer_of_init(struct device_node *np) +{ + int i; + + if (arch_timers_present & ARCH_CP15_TIMER) { + pr_warn("arch_timer: multiple nodes in dt, skipping\n"); + return; + } + + arch_timers_present |= ARCH_CP15_TIMER; + for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) + arch_timer_ppi[i] = irq_of_parse_and_map(np, i); + + arch_timer_detect_rate(NULL, np); + + arch_timer_c3stop = !of_property_read_bool(np, "always-on"); + + /* + * If we cannot rely on firmware initializing the timer registers then + * we should use the physical timers instead. + */ + if (IS_ENABLED(CONFIG_ARM) && + of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) + arch_timer_use_virtual = false; + + arch_timer_init(); +} +CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init); +CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init); static void __init arch_timer_mem_init(struct device_node *np) { @@ -804,3 +815,70 @@ static void __init arch_timer_mem_init(struct device_node *np) } CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem", arch_timer_mem_init); + +#ifdef CONFIG_ACPI +static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags) +{ + int trigger, polarity; + + if (!interrupt) + return 0; + + trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE + : ACPI_LEVEL_SENSITIVE; + + polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW + : ACPI_ACTIVE_HIGH; + + return acpi_register_gsi(NULL, interrupt, trigger, polarity); +} + +/* Initialize per-processor generic timer */ +static int __init arch_timer_acpi_init(struct acpi_table_header *table) +{ + struct acpi_table_gtdt *gtdt; + + if (arch_timers_present & ARCH_CP15_TIMER) { + pr_warn("arch_timer: already initialized, skipping\n"); + return -EINVAL; + } + + gtdt = container_of(table, struct acpi_table_gtdt, header); + + arch_timers_present |= ARCH_CP15_TIMER; + + arch_timer_ppi[PHYS_SECURE_PPI] = + map_generic_timer_interrupt(gtdt->secure_el1_interrupt, + gtdt->secure_el1_flags); + + arch_timer_ppi[PHYS_NONSECURE_PPI] = + map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt, + gtdt->non_secure_el1_flags); + + arch_timer_ppi[VIRT_PPI] = + map_generic_timer_interrupt(gtdt->virtual_timer_interrupt, + gtdt->virtual_timer_flags); + + arch_timer_ppi[HYP_PPI] = + map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt, + gtdt->non_secure_el2_flags); + + /* Get the frequency from CNTFRQ */ + arch_timer_detect_rate(NULL, NULL); + + /* Always-on capability */ + arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON); + + arch_timer_init(); + return 0; +} + +/* Initialize all the generic timers presented in GTDT */ +void __init acpi_generic_timer_init(void) +{ + if (acpi_disabled) + return; + + acpi_table_parse(ACPI_SIG_GTDT, arch_timer_acpi_init); +} +#endif diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 9c78d15d33e4..2b2e1f80c519 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -244,4 +244,10 @@ extern void clocksource_of_init(void); static inline void clocksource_of_init(void) {} #endif +#ifdef CONFIG_ACPI +void acpi_generic_timer_init(void); +#else +static inline void acpi_generic_timer_init(void) { } +#endif + #endif /* _LINUX_CLOCKSOURCE_H */ -- cgit v1.2.3 From 42068cfd652843bdb61c374cf3582c4c0643483b Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Tue, 24 Mar 2015 14:02:52 +0000 Subject: XEN / ACPI: Make XEN ACPI depend on X86 When ACPI is enabled on ARM64, XEN ACPI will also compiled into the kernel, but XEN ACPI is x86 dependent, so introduce CONFIG_XEN_ACPI to make it depend on x86 before XEN ACPI is functional on ARM64. CC: Julien Grall CC: Konrad Rzeszutek Wilk CC: Boris Ostrovsky CC: David Vrabel Acked-by: Stefano Stabellini Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- drivers/xen/Kconfig | 4 ++++ drivers/xen/Makefile | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index b812462083fc..a31cd29b68a8 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -253,4 +253,8 @@ config XEN_EFI def_bool y depends on X86_64 && EFI +config XEN_ACPI + def_bool y + depends on X86 && ACPI + endmenu diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index 2ccd3592d41f..f4622ab1fc3e 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -13,7 +13,7 @@ CFLAGS_efi.o += -fshort-wchar dom0-$(CONFIG_PCI) += pci.o dom0-$(CONFIG_USB_SUPPORT) += dbgp.o -dom0-$(CONFIG_ACPI) += acpi.o $(xen-pad-y) +dom0-$(CONFIG_XEN_ACPI) += acpi.o $(xen-pad-y) xen-pad-$(CONFIG_X86) += xen-acpi-pad.o dom0-$(CONFIG_X86) += pcpu.o obj-$(CONFIG_XEN_DOM0) += $(dom0-y) -- cgit v1.2.3 From b6a0217371317298c900f0e0f84afb04312d5af0 Mon Sep 17 00:00:00 2001 From: Graeme Gregory Date: Tue, 24 Mar 2015 14:02:53 +0000 Subject: ARM64 / ACPI: Enable ARM64 in Kconfig Add Kconfigs to build ACPI on ARM64, and make ACPI available on ARM64. acpi_idle driver is x86/IA64 dependent now, so make CONFIG_ACPI_PROCESSOR depend on X86 || IA64, and implement it on ARM64 in the future. CC: Rafael J. Wysocki CC: Catalin Marinas CC: Will Deacon Reviewed-by: Grant Likely Tested-by: Suravee Suthikulpanit Tested-by: Yijing Wang Tested-by: Mark Langsdorf Tested-by: Jon Masters Tested-by: Timur Tabi Tested-by: Robert Richter Acked-by: Robert Richter Acked-by: Rafael J. Wysocki Signed-off-by: Graeme Gregory Signed-off-by: Al Stone Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- arch/arm64/Kconfig | 2 ++ drivers/acpi/Kconfig | 3 ++- 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index d00ab9a71d59..e5aa081b4845 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -713,6 +713,8 @@ source "drivers/Kconfig" source "drivers/firmware/Kconfig" +source "drivers/acpi/Kconfig" + source "fs/Kconfig" source "arch/arm64/kvm/Kconfig" diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index a726381fea72..a8f531e2b97c 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -5,7 +5,7 @@ menuconfig ACPI bool "ACPI (Advanced Configuration and Power Interface) Support" depends on !IA64_HP_SIM - depends on IA64 || X86 + depends on IA64 || X86 || (ARM64 && EXPERT) depends on PCI select PNP default y @@ -167,6 +167,7 @@ config ACPI_PROCESSOR tristate "Processor" select THERMAL select CPU_IDLE + depends on X86 || IA64 default y help This driver installs ACPI as the idle handler for Linux and uses -- cgit v1.2.3 From d8f4f161e31f3ee9768467344e6cc31a0b9d9249 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Tue, 24 Mar 2015 17:58:51 +0000 Subject: ACPI: move arm64 GSI IRQ model to generic GSI IRQ layer The code deployed to implement GSI linux IRQ numbers mapping on arm64 turns out to be generic enough so that it can be moved to ACPI core code along with its respective config option ACPI_GENERIC_GSI selectable on architectures that can reuse the same code. Current ACPI IRQ mapping code is not integrated in the kernel IRQ domain infrastructure, in particular there is no way to look-up the IRQ domain associated with a particular interrupt controller, so this first version of GSI generic code carries out the GSI<->IRQ mapping relying on the IRQ default domain which is supposed to be always set on a specific architecture in case the domain structure passed to irq_create/find_mapping() functions is missing. This patch moves the arm64 acpi functions that implement the gsi mappings: acpi_gsi_to_irq() acpi_register_gsi() acpi_unregister_gsi() to ACPI core code. Since the generic GSI<->domain mapping is based on IRQ domains, it can be extended as soon as a way to map an interrupt controller to an IRQ domain is implemented for ACPI in the IRQ domain layer. x86 and ia64 code for GSI mappings cannot rely on the generic GSI layer at present for legacy reasons, so they do not select the ACPI_GENERIC_GSI config options and keep relying on their arch specific GSI mapping layer. Cc: Jiang Liu Cc: Catalin Marinas Cc: Rafael J. Wysocki Acked-by: Hanjun Guo Acked-by: Will Deacon Acked-by: Marc Zyngier Signed-off-by: Lorenzo Pieralisi Signed-off-by: Will Deacon --- arch/arm64/Kconfig | 1 + arch/arm64/kernel/acpi.c | 73 -------------------------------- drivers/acpi/Kconfig | 3 ++ drivers/acpi/Makefile | 1 + drivers/acpi/gsi.c | 105 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/irqchip/irq-gic.c | 2 + 6 files changed, 112 insertions(+), 73 deletions(-) create mode 100644 drivers/acpi/gsi.c (limited to 'drivers') diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index e5aa081b4845..0659db374731 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1,5 +1,6 @@ config ARM64 def_bool y + select ACPI_GENERIC_GSI if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI select ARCH_BINFMT_ELF_RANDOMIZE_PIE select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index fe9d8f0df4a3..a70f7141c0f6 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -75,12 +75,6 @@ static int __init dt_scan_depth1_nodes(unsigned long node, return 0; } -/* - * Since we're on ARM, the default interrupt routing model - * clearly has to be GIC. - */ -enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_GIC; - /* * __acpi_map_table() will be called before page_init(), so early_ioremap() * or early_memremap() should be called here to for ACPI table mapping. @@ -224,73 +218,6 @@ void __init acpi_init_cpus(void) pr_info("%d CPUs enabled, %d CPUs total\n", enabled_cpus, total_cpus); } -int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) -{ - *irq = irq_find_mapping(NULL, gsi); - - return 0; -} -EXPORT_SYMBOL_GPL(acpi_gsi_to_irq); - -/* - * success: return IRQ number (>0) - * failure: return =< 0 - */ -int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) -{ - unsigned int irq; - unsigned int irq_type; - - /* - * ACPI have no bindings to indicate SPI or PPI, so we - * use different mappings from DT in ACPI. - * - * For FDT - * PPI interrupt: in the range [0, 15]; - * SPI interrupt: in the range [0, 987]; - * - * For ACPI, GSI should be unique so using - * the hwirq directly for the mapping: - * PPI interrupt: in the range [16, 31]; - * SPI interrupt: in the range [32, 1019]; - */ - - if (trigger == ACPI_EDGE_SENSITIVE && - polarity == ACPI_ACTIVE_LOW) - irq_type = IRQ_TYPE_EDGE_FALLING; - else if (trigger == ACPI_EDGE_SENSITIVE && - polarity == ACPI_ACTIVE_HIGH) - irq_type = IRQ_TYPE_EDGE_RISING; - else if (trigger == ACPI_LEVEL_SENSITIVE && - polarity == ACPI_ACTIVE_LOW) - irq_type = IRQ_TYPE_LEVEL_LOW; - else if (trigger == ACPI_LEVEL_SENSITIVE && - polarity == ACPI_ACTIVE_HIGH) - irq_type = IRQ_TYPE_LEVEL_HIGH; - else - irq_type = IRQ_TYPE_NONE; - - /* - * Since only one GIC is supported in ACPI 5.0, we can - * create mapping refer to the default domain - */ - irq = irq_create_mapping(NULL, gsi); - if (!irq) - return irq; - - /* Set irq type if specified and different than the current one */ - if (irq_type != IRQ_TYPE_NONE && - irq_type != irq_get_trigger_type(irq)) - irq_set_irq_type(irq, irq_type); - return irq; -} -EXPORT_SYMBOL_GPL(acpi_register_gsi); - -void acpi_unregister_gsi(u32 gsi) -{ -} -EXPORT_SYMBOL_GPL(acpi_unregister_gsi); - static int __init acpi_parse_fadt(struct acpi_table_header *table) { struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table; diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index a8f531e2b97c..ab2cbb51c6aa 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -48,6 +48,9 @@ config ACPI_LEGACY_TABLES_LOOKUP config ARCH_MIGHT_HAVE_ACPI_PDC bool +config ACPI_GENERIC_GSI + bool + config ACPI_SYSTEM_POWER_STATES_SUPPORT bool diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index db153c6a75d7..8a063e276530 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -56,6 +56,7 @@ ifdef CONFIG_ACPI_VIDEO acpi-y += video_detect.o endif acpi-y += acpi_lpat.o +acpi-$(CONFIG_ACPI_GENERIC_GSI) += gsi.o # These are (potentially) separate modules diff --git a/drivers/acpi/gsi.c b/drivers/acpi/gsi.c new file mode 100644 index 000000000000..38208f2d0e69 --- /dev/null +++ b/drivers/acpi/gsi.c @@ -0,0 +1,105 @@ +/* + * ACPI GSI IRQ layer + * + * Copyright (C) 2015 ARM Ltd. + * Author: Lorenzo Pieralisi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +enum acpi_irq_model_id acpi_irq_model; + +static unsigned int acpi_gsi_get_irq_type(int trigger, int polarity) +{ + switch (polarity) { + case ACPI_ACTIVE_LOW: + return trigger == ACPI_EDGE_SENSITIVE ? + IRQ_TYPE_EDGE_FALLING : + IRQ_TYPE_LEVEL_LOW; + case ACPI_ACTIVE_HIGH: + return trigger == ACPI_EDGE_SENSITIVE ? + IRQ_TYPE_EDGE_RISING : + IRQ_TYPE_LEVEL_HIGH; + case ACPI_ACTIVE_BOTH: + if (trigger == ACPI_EDGE_SENSITIVE) + return IRQ_TYPE_EDGE_BOTH; + default: + return IRQ_TYPE_NONE; + } +} + +/** + * acpi_gsi_to_irq() - Retrieve the linux irq number for a given GSI + * @gsi: GSI IRQ number to map + * @irq: pointer where linux IRQ number is stored + * + * irq location updated with irq value [>0 on success, 0 on failure] + * + * Returns: linux IRQ number on success (>0) + * -EINVAL on failure + */ +int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) +{ + /* + * Only default domain is supported at present, always find + * the mapping corresponding to default domain by passing NULL + * as irq_domain parameter + */ + *irq = irq_find_mapping(NULL, gsi); + /* + * *irq == 0 means no mapping, that should + * be reported as a failure + */ + return (*irq > 0) ? *irq : -EINVAL; +} +EXPORT_SYMBOL_GPL(acpi_gsi_to_irq); + +/** + * acpi_register_gsi() - Map a GSI to a linux IRQ number + * @dev: device for which IRQ has to be mapped + * @gsi: GSI IRQ number + * @trigger: trigger type of the GSI number to be mapped + * @polarity: polarity of the GSI to be mapped + * + * Returns: a valid linux IRQ number on success + * -EINVAL on failure + */ +int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, + int polarity) +{ + unsigned int irq; + unsigned int irq_type = acpi_gsi_get_irq_type(trigger, polarity); + + /* + * There is no way at present to look-up the IRQ domain on ACPI, + * hence always create mapping referring to the default domain + * by passing NULL as irq_domain parameter + */ + irq = irq_create_mapping(NULL, gsi); + if (!irq) + return -EINVAL; + + /* Set irq type if specified and different than the current one */ + if (irq_type != IRQ_TYPE_NONE && + irq_type != irq_get_trigger_type(irq)) + irq_set_irq_type(irq, irq_type); + return irq; +} +EXPORT_SYMBOL_GPL(acpi_register_gsi); + +/** + * acpi_unregister_gsi() - Free a GSI<->linux IRQ number mapping + * @gsi: GSI IRQ number + */ +void acpi_unregister_gsi(u32 gsi) +{ + int irq = irq_find_mapping(NULL, gsi); + + irq_dispose_mapping(irq); +} +EXPORT_SYMBOL_GPL(acpi_unregister_gsi); diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index d15a36a93c52..f1efb53faebc 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -1189,6 +1189,8 @@ gic_v2_acpi_init(struct acpi_table_header *table) */ gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL); irq_set_default_host(gic_data[0].domain); + + acpi_irq_model = ACPI_IRQ_MODEL_GIC; return 0; } #endif -- cgit v1.2.3