From 80dea21f95a4672cce545f48dc2ca500b69a2584 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Fri, 20 Jan 2017 12:39:32 -0800 Subject: iio: magnetometer: mag3110: claim direct mode during raw writes Driver was checking for direct mode but not locking it. Use claim/release helper functions to guarantee the device stays in direct mode during raw writes. Signed-off-by: Alison Schofield Acked-by: Peter Meerwald-Stadler Signed-off-by: Jonathan Cameron --- drivers/iio/magnetometer/mag3110.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c index f2b3bd7bf862..b4f643fb3b1e 100644 --- a/drivers/iio/magnetometer/mag3110.c +++ b/drivers/iio/magnetometer/mag3110.c @@ -222,29 +222,39 @@ static int mag3110_write_raw(struct iio_dev *indio_dev, int val, int val2, long mask) { struct mag3110_data *data = iio_priv(indio_dev); - int rate; + int rate, ret; - if (iio_buffer_enabled(indio_dev)) - return -EBUSY; + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; switch (mask) { case IIO_CHAN_INFO_SAMP_FREQ: rate = mag3110_get_samp_freq_index(data, val, val2); - if (rate < 0) - return -EINVAL; + if (rate < 0) { + ret = -EINVAL; + break; + } data->ctrl_reg1 &= ~MAG3110_CTRL_DR_MASK; data->ctrl_reg1 |= rate << MAG3110_CTRL_DR_SHIFT; - return i2c_smbus_write_byte_data(data->client, + ret = i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1, data->ctrl_reg1); + break; case IIO_CHAN_INFO_CALIBBIAS: - if (val < -10000 || val > 10000) - return -EINVAL; - return i2c_smbus_write_word_swapped(data->client, + if (val < -10000 || val > 10000) { + ret = -EINVAL; + break; + } + ret = i2c_smbus_write_word_swapped(data->client, MAG3110_OFF_X + 2 * chan->scan_index, val << 1); + break; default: - return -EINVAL; + ret = -EINVAL; + break; } + iio_device_release_direct_mode(indio_dev); + return ret; } static irqreturn_t mag3110_trigger_handler(int irq, void *p) -- cgit v1.2.3