From ab1ef141161c158360fab671e72226cffb5f9774 Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qca.qualcomm.com>
Date: Tue, 19 Mar 2013 09:48:35 +0530
Subject: ath6kl: Check wmi ready event status before validating abi version

There is no point to check firmware ABI version when the driver
fails to wait for WMI_READY event during the boot time.

For such failures, the driver should assume the firmware is not
booted and start doing cleanup.

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/init.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index 40ffee6184fd..6a67881f94d6 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -1696,10 +1696,16 @@ static int __ath6kl_init_hw_start(struct ath6kl *ar)
 						    test_bit(WMI_READY,
 							     &ar->flag),
 						    WMI_TIMEOUT);
+	if (timeleft <= 0) {
+		clear_bit(WMI_READY, &ar->flag);
+		ath6kl_err("wmi is not ready or wait was interrupted: %ld\n",
+			   timeleft);
+		ret = -EIO;
+		goto err_htc_stop;
+	}
 
 	ath6kl_dbg(ATH6KL_DBG_BOOT, "firmware booted\n");
 
-
 	if (test_and_clear_bit(FIRST_BOOT, &ar->flag)) {
 		ath6kl_info("%s %s fw %s api %d%s\n",
 			    ar->hw.name,
@@ -1718,12 +1724,6 @@ static int __ath6kl_init_hw_start(struct ath6kl *ar)
 		goto err_htc_stop;
 	}
 
-	if (!timeleft || signal_pending(current)) {
-		ath6kl_err("wmi is not ready or wait was interrupted\n");
-		ret = -EIO;
-		goto err_htc_stop;
-	}
-
 	ath6kl_dbg(ATH6KL_DBG_TRC, "%s: wmi is ready\n", __func__);
 
 	/* communicate the wmi protocol verision to the target */
-- 
cgit v1.2.3


From ade983307453cf6043454dd9ac08abab5193d704 Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Thu, 25 Apr 2013 16:31:22 +0300
Subject: wireless: ath6kl: re-use native helper to parse MAC

There is native mac_pton() function which helps to parse MAC.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/debug.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath6kl/debug.c b/drivers/net/wireless/ath/ath6kl/debug.c
index fe38b836cb26..dbfd17d0a5fa 100644
--- a/drivers/net/wireless/ath/ath6kl/debug.c
+++ b/drivers/net/wireless/ath/ath6kl/debug.c
@@ -1240,20 +1240,14 @@ static ssize_t ath6kl_force_roam_write(struct file *file,
 	char buf[20];
 	size_t len;
 	u8 bssid[ETH_ALEN];
-	int i;
-	int addr[ETH_ALEN];
 
 	len = min(count, sizeof(buf) - 1);
 	if (copy_from_user(buf, user_buf, len))
 		return -EFAULT;
 	buf[len] = '\0';
 
-	if (sscanf(buf, "%02x:%02x:%02x:%02x:%02x:%02x",
-		   &addr[0], &addr[1], &addr[2], &addr[3], &addr[4], &addr[5])
-	    != ETH_ALEN)
+	if (!mac_pton(buf, bssid))
 		return -EINVAL;
-	for (i = 0; i < ETH_ALEN; i++)
-		bssid[i] = addr[i];
 
 	ret = ath6kl_wmi_force_roam_cmd(ar->wmi, bssid);
 	if (ret)
-- 
cgit v1.2.3


From 0b3d3ff15fa67b5417aae67bdc6252c001b2631d Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Date: Wed, 15 May 2013 10:22:10 +0530
Subject: ath6kl: Rename USB driver's suspend/resume/reset_resume

Rename USB driver's suspend/resume/reset_resume callbacks
with 'pm' prefix. This is necessary to differentiate it from
cfg80211/hif suspend/resume/reset_resume callbacks.

Cc: Sivanesan Rajapupathi <c_srajap@qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/usb.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c
index bed0d337712d..cf488f8f049d 100644
--- a/drivers/net/wireless/ath/ath6kl/usb.c
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -1152,7 +1152,7 @@ static void ath6kl_usb_remove(struct usb_interface *interface)
 
 #ifdef CONFIG_PM
 
-static int ath6kl_usb_suspend(struct usb_interface *interface,
+static int ath6kl_usb_pm_suspend(struct usb_interface *interface,
 			      pm_message_t message)
 {
 	struct ath6kl_usb *device;
@@ -1162,7 +1162,7 @@ static int ath6kl_usb_suspend(struct usb_interface *interface,
 	return 0;
 }
 
-static int ath6kl_usb_resume(struct usb_interface *interface)
+static int ath6kl_usb_pm_resume(struct usb_interface *interface)
 {
 	struct ath6kl_usb *device;
 	device = usb_get_intfdata(interface);
@@ -1175,7 +1175,7 @@ static int ath6kl_usb_resume(struct usb_interface *interface)
 	return 0;
 }
 
-static int ath6kl_usb_reset_resume(struct usb_interface *intf)
+static int ath6kl_usb_pm_reset_resume(struct usb_interface *intf)
 {
 	if (usb_get_intfdata(intf))
 		ath6kl_usb_remove(intf);
@@ -1184,9 +1184,9 @@ static int ath6kl_usb_reset_resume(struct usb_interface *intf)
 
 #else
 
-#define ath6kl_usb_suspend NULL
-#define ath6kl_usb_resume NULL
-#define ath6kl_usb_reset_resume NULL
+#define ath6kl_usb_pm_suspend NULL
+#define ath6kl_usb_pm_resume NULL
+#define ath6kl_usb_pm_reset_resume NULL
 
 #endif
 
@@ -1201,9 +1201,9 @@ MODULE_DEVICE_TABLE(usb, ath6kl_usb_ids);
 static struct usb_driver ath6kl_usb_driver = {
 	.name = "ath6kl_usb",
 	.probe = ath6kl_usb_probe,
-	.suspend = ath6kl_usb_suspend,
-	.resume = ath6kl_usb_resume,
-	.reset_resume = ath6kl_usb_reset_resume,
+	.suspend = ath6kl_usb_pm_suspend,
+	.resume = ath6kl_usb_pm_resume,
+	.reset_resume = ath6kl_usb_pm_reset_resume,
 	.disconnect = ath6kl_usb_remove,
 	.id_table = ath6kl_usb_ids,
 	.supports_autosuspend = true,
-- 
cgit v1.2.3


From 8c40e4e0e158aca76c657533ae57fa3e33655778 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Date: Wed, 15 May 2013 10:22:24 +0530
Subject: ath6kl: Fix a suspend/resume crash in AR6004 USB

cfg80211 suspend/resume callbacks are not yet implemented
for AR6004 USB. Introduce dummy handlers for these to avoid
NULL pointer dereference.

Cc: Sivanesan Rajapupathi <c_srajap@qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/usb.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c
index cf488f8f049d..f38ff6a6255e 100644
--- a/drivers/net/wireless/ath/ath6kl/usb.c
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -1061,6 +1061,22 @@ static void ath6kl_usb_cleanup_scatter(struct ath6kl *ar)
 	return;
 }
 
+static int ath6kl_usb_suspend(struct ath6kl *ar, struct cfg80211_wowlan *wow)
+{
+	/*
+	 * cfg80211 suspend/WOW currently not supported for USB.
+	 */
+	return 0;
+}
+
+static int ath6kl_usb_resume(struct ath6kl *ar)
+{
+	/*
+	 * cfg80211 resume currently not supported for USB.
+	 */
+	return 0;
+}
+
 static const struct ath6kl_hif_ops ath6kl_usb_ops = {
 	.diag_read32 = ath6kl_usb_diag_read32,
 	.diag_write32 = ath6kl_usb_diag_write32,
@@ -1074,6 +1090,8 @@ static const struct ath6kl_hif_ops ath6kl_usb_ops = {
 	.pipe_map_service = ath6kl_usb_map_service_pipe,
 	.pipe_get_free_queue_number = ath6kl_usb_get_free_queue_number,
 	.cleanup_scatter = ath6kl_usb_cleanup_scatter,
+	.suspend = ath6kl_usb_suspend,
+	.resume = ath6kl_usb_resume,
 };
 
 /* ath6kl usb driver registered functions */
-- 
cgit v1.2.3


From 37291fc61253cd34db40b7a60be4497db776db41 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Wed, 24 Apr 2013 14:02:34 +0200
Subject: ath6kl: Unify sg_sz and buf_sz in ath6kl_sdio_alloc_prep_scat_req()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

sg_sz and buf_sz are initialized and used in a mutual exclusive way.
However, some versions of gcc are not smart enough to see this:

drivers/net/wireless/ath/ath6kl/sdio.c: In function ‘ath6kl_sdio_alloc_prep_scat_req’:
drivers/net/wireless/ath/ath6kl/sdio.c:338: warning: ‘sg_sz’ may be used uninitialized in this function

Unify the sg_sz and buf_sz variables into a single size variable to kill
the compiler warning.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/sdio.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index fb141454c6d2..7126bdd4236c 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -345,17 +345,17 @@ static int ath6kl_sdio_alloc_prep_scat_req(struct ath6kl_sdio *ar_sdio,
 {
 	struct hif_scatter_req *s_req;
 	struct bus_request *bus_req;
-	int i, scat_req_sz, scat_list_sz, sg_sz, buf_sz;
+	int i, scat_req_sz, scat_list_sz, size;
 	u8 *virt_buf;
 
 	scat_list_sz = (n_scat_entry - 1) * sizeof(struct hif_scatter_item);
 	scat_req_sz = sizeof(*s_req) + scat_list_sz;
 
 	if (!virt_scat)
-		sg_sz = sizeof(struct scatterlist) * n_scat_entry;
+		size = sizeof(struct scatterlist) * n_scat_entry;
 	else
-		buf_sz =  2 * L1_CACHE_BYTES +
-			  ATH6KL_MAX_TRANSFER_SIZE_PER_SCATTER;
+		size =  2 * L1_CACHE_BYTES +
+			ATH6KL_MAX_TRANSFER_SIZE_PER_SCATTER;
 
 	for (i = 0; i < n_scat_req; i++) {
 		/* allocate the scatter request */
@@ -364,7 +364,7 @@ static int ath6kl_sdio_alloc_prep_scat_req(struct ath6kl_sdio *ar_sdio,
 			return -ENOMEM;
 
 		if (virt_scat) {
-			virt_buf = kzalloc(buf_sz, GFP_KERNEL);
+			virt_buf = kzalloc(size, GFP_KERNEL);
 			if (!virt_buf) {
 				kfree(s_req);
 				return -ENOMEM;
@@ -374,7 +374,7 @@ static int ath6kl_sdio_alloc_prep_scat_req(struct ath6kl_sdio *ar_sdio,
 				(u8 *)L1_CACHE_ALIGN((unsigned long)virt_buf);
 		} else {
 			/* allocate sglist */
-			s_req->sgentries = kzalloc(sg_sz, GFP_KERNEL);
+			s_req->sgentries = kzalloc(size, GFP_KERNEL);
 
 			if (!s_req->sgentries) {
 				kfree(s_req);
-- 
cgit v1.2.3


From 964dc9e2c3aaccacacd40640964a58544fb5769a Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 3 Jun 2013 17:25:34 +0200
Subject: cfg80211: take WoWLAN support information out of wiphy struct

There's no need to take up the space for devices that don't
support WoWLAN, and most drivers can even make the support
data static const (except where it's modified at runtime.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c  | 24 ++++++++-----
 drivers/net/wireless/ath/ath9k/init.c       | 20 ++++++-----
 drivers/net/wireless/iwlwifi/dvm/dev.h      |  3 ++
 drivers/net/wireless/iwlwifi/dvm/mac80211.c | 17 ++++-----
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 26 +++++++-------
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |  1 +
 drivers/net/wireless/mwifiex/cfg80211.c     | 16 ++++++---
 drivers/net/wireless/ti/wlcore/main.c       | 19 +++++-----
 include/net/cfg80211.h                      |  2 +-
 net/mac80211/main.c                         |  3 +-
 net/wireless/core.c                         | 20 ++++++-----
 net/wireless/nl80211.c                      | 56 ++++++++++++++---------------
 12 files changed, 115 insertions(+), 92 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 5c9736a94e54..f7995b2b12a4 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -3679,6 +3679,20 @@ err:
 	return NULL;
 }
 
+#ifdef CONFIG_PM
+static const struct wiphy_wowlan_support ath6kl_wowlan_support = {
+	.flags = WIPHY_WOWLAN_MAGIC_PKT |
+		 WIPHY_WOWLAN_DISCONNECT |
+		 WIPHY_WOWLAN_GTK_REKEY_FAILURE  |
+		 WIPHY_WOWLAN_SUPPORTS_GTK_REKEY |
+		 WIPHY_WOWLAN_EAP_IDENTITY_REQ   |
+		 WIPHY_WOWLAN_4WAY_HANDSHAKE,
+	.n_patterns = WOW_MAX_FILTERS_PER_LIST,
+	.pattern_min_len = 1,
+	.pattern_max_len = WOW_PATTERN_SIZE,
+};
+#endif
+
 int ath6kl_cfg80211_init(struct ath6kl *ar)
 {
 	struct wiphy *wiphy = ar->wiphy;
@@ -3772,15 +3786,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
 
 #ifdef CONFIG_PM
-	wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT |
-			      WIPHY_WOWLAN_DISCONNECT |
-			      WIPHY_WOWLAN_GTK_REKEY_FAILURE  |
-			      WIPHY_WOWLAN_SUPPORTS_GTK_REKEY |
-			      WIPHY_WOWLAN_EAP_IDENTITY_REQ   |
-			      WIPHY_WOWLAN_4WAY_HANDSHAKE;
-	wiphy->wowlan.n_patterns = WOW_MAX_FILTERS_PER_LIST;
-	wiphy->wowlan.pattern_min_len = 1;
-	wiphy->wowlan.pattern_max_len = WOW_PATTERN_SIZE;
+	wiphy->wowlan = &ath6kl_wowlan_support;
 #endif
 
 	wiphy->max_sched_scan_ssids = MAX_PROBED_SSIDS;
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 0237b2868961..f993362e9e13 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -755,6 +755,15 @@ static const struct ieee80211_iface_combination if_comb[] = {
 	}
 };
 
+#ifdef CONFIG_PM
+static const struct wiphy_wowlan_support ath9k_wowlan_support = {
+	.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
+	.n_patterns = MAX_NUM_USER_PATTERN,
+	.pattern_min_len = 1,
+	.pattern_max_len = MAX_PATTERN_SIZE,
+};
+#endif
+
 void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 {
 	struct ath_hw *ah = sc->sc_ah;
@@ -797,15 +806,8 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 #ifdef CONFIG_PM_SLEEP
 
 	if ((ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) &&
-	    device_can_wakeup(sc->dev)) {
-
-		hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT |
-					  WIPHY_WOWLAN_DISCONNECT;
-		hw->wiphy->wowlan.n_patterns = MAX_NUM_USER_PATTERN;
-		hw->wiphy->wowlan.pattern_min_len = 1;
-		hw->wiphy->wowlan.pattern_max_len = MAX_PATTERN_SIZE;
-
-	}
+	    device_can_wakeup(sc->dev))
+		hw->wiphy->wowlan = &ath9k_wowlan_support;
 
 	atomic_set(&sc->wow_sleep_proc_intr, -1);
 	atomic_set(&sc->wow_got_bmiss_intr, -1);
diff --git a/drivers/net/wireless/iwlwifi/dvm/dev.h b/drivers/net/wireless/iwlwifi/dvm/dev.h
index 71ea77576d22..e71acfd344aa 100644
--- a/drivers/net/wireless/iwlwifi/dvm/dev.h
+++ b/drivers/net/wireless/iwlwifi/dvm/dev.h
@@ -870,6 +870,9 @@ struct iwl_priv {
 	__le64 replay_ctr;
 	__le16 last_seq_ctl;
 	bool have_rekey_data;
+#ifdef CONFIG_PM_SLEEP
+	struct wiphy_wowlan_support wowlan_support;
+#endif
 
 	/* device_pointers: pointers to ucode event tables */
 	struct {
diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
index cab23af0be9e..661b5e71aac8 100644
--- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -208,20 +208,21 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv,
 	    priv->trans->ops->d3_suspend &&
 	    priv->trans->ops->d3_resume &&
 	    device_can_wakeup(priv->trans->dev)) {
-		hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT |
-					  WIPHY_WOWLAN_DISCONNECT |
-					  WIPHY_WOWLAN_EAP_IDENTITY_REQ |
-					  WIPHY_WOWLAN_RFKILL_RELEASE;
+		priv->wowlan_support.flags = WIPHY_WOWLAN_MAGIC_PKT |
+					     WIPHY_WOWLAN_DISCONNECT |
+					     WIPHY_WOWLAN_EAP_IDENTITY_REQ |
+					     WIPHY_WOWLAN_RFKILL_RELEASE;
 		if (!iwlwifi_mod_params.sw_crypto)
-			hw->wiphy->wowlan.flags |=
+			priv->wowlan_support.flags |=
 				WIPHY_WOWLAN_SUPPORTS_GTK_REKEY |
 				WIPHY_WOWLAN_GTK_REKEY_FAILURE;
 
-		hw->wiphy->wowlan.n_patterns = IWLAGN_WOWLAN_MAX_PATTERNS;
-		hw->wiphy->wowlan.pattern_min_len =
+		priv->wowlan_support.n_patterns = IWLAGN_WOWLAN_MAX_PATTERNS;
+		priv->wowlan_support.pattern_min_len =
 					IWLAGN_WOWLAN_MIN_PATTERN_LEN;
-		hw->wiphy->wowlan.pattern_max_len =
+		priv->wowlan_support.pattern_max_len =
 					IWLAGN_WOWLAN_MAX_PATTERN_LEN;
+		hw->wiphy->wowlan = &priv->wowlan_support;
 	}
 #endif
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index dd158ec571fb..827fa641490f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -222,20 +222,20 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 	    mvm->trans->ops->d3_suspend &&
 	    mvm->trans->ops->d3_resume &&
 	    device_can_wakeup(mvm->trans->dev)) {
-		hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT |
-					  WIPHY_WOWLAN_DISCONNECT |
-					  WIPHY_WOWLAN_EAP_IDENTITY_REQ |
-					  WIPHY_WOWLAN_RFKILL_RELEASE;
+		mvm->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT |
+				    WIPHY_WOWLAN_DISCONNECT |
+				    WIPHY_WOWLAN_EAP_IDENTITY_REQ |
+				    WIPHY_WOWLAN_RFKILL_RELEASE;
 		if (!iwlwifi_mod_params.sw_crypto)
-			hw->wiphy->wowlan.flags |=
-				WIPHY_WOWLAN_SUPPORTS_GTK_REKEY |
-				WIPHY_WOWLAN_GTK_REKEY_FAILURE |
-				WIPHY_WOWLAN_4WAY_HANDSHAKE;
-
-		hw->wiphy->wowlan.n_patterns = IWL_WOWLAN_MAX_PATTERNS;
-		hw->wiphy->wowlan.pattern_min_len = IWL_WOWLAN_MIN_PATTERN_LEN;
-		hw->wiphy->wowlan.pattern_max_len = IWL_WOWLAN_MAX_PATTERN_LEN;
-		hw->wiphy->wowlan.tcp = &iwl_mvm_wowlan_tcp_support;
+			mvm->wowlan.flags |= WIPHY_WOWLAN_SUPPORTS_GTK_REKEY |
+					     WIPHY_WOWLAN_GTK_REKEY_FAILURE |
+					     WIPHY_WOWLAN_4WAY_HANDSHAKE;
+
+		mvm->wowlan.n_patterns = IWL_WOWLAN_MAX_PATTERNS;
+		mvm->wowlan.pattern_min_len = IWL_WOWLAN_MIN_PATTERN_LEN;
+		mvm->wowlan.pattern_max_len = IWL_WOWLAN_MAX_PATTERN_LEN;
+		mvm->wowlan.tcp = &iwl_mvm_wowlan_tcp_support;
+		hw->wiphy->wowlan = &mvm->wowlan;
 	}
 #endif
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 8269bc562951..b62a948658ac 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -336,6 +336,7 @@ struct iwl_mvm {
 	struct ieee80211_vif *p2p_device_vif;
 
 #ifdef CONFIG_PM_SLEEP
+	struct wiphy_wowlan_support wowlan;
 	int gtk_ivlen, gtk_icvlen, ptk_ivlen, ptk_icvlen;
 #endif
 
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index e42b266a023a..60077895adff 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -2426,6 +2426,16 @@ static struct cfg80211_ops mwifiex_cfg80211_ops = {
 #endif
 };
 
+#ifdef CONFIG_PM
+static const struct wiphy_wowlan_support mwifiex_wowlan_support = {
+	.flags = WIPHY_WOWLAN_MAGIC_PKT,
+	.n_patterns = MWIFIEX_MAX_FILTERS,
+	.pattern_min_len = 1,
+	.pattern_max_len = MWIFIEX_MAX_PATTERN_LEN,
+	.max_pkt_offset = MWIFIEX_MAX_OFFSET_LEN,
+};
+#endif
+
 /*
  * This function registers the device with CFG802.11 subsystem.
  *
@@ -2483,11 +2493,7 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
 	wiphy_apply_custom_regulatory(wiphy, &mwifiex_world_regdom_custom);
 
 #ifdef CONFIG_PM
-	wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT;
-	wiphy->wowlan.n_patterns = MWIFIEX_MAX_FILTERS;
-	wiphy->wowlan.pattern_min_len = 1;
-	wiphy->wowlan.pattern_max_len = MWIFIEX_MAX_PATTERN_LEN;
-	wiphy->wowlan.max_pkt_offset = MWIFIEX_MAX_OFFSET_LEN;
+	wiphy->wowlan = &mwifiex_wowlan_support;
 #endif
 
 	wiphy->probe_resp_offload = NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 953111a502ee..796928ba875f 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -6018,6 +6018,15 @@ int wlcore_free_hw(struct wl1271 *wl)
 }
 EXPORT_SYMBOL_GPL(wlcore_free_hw);
 
+#ifdef CONFIG_PM
+static const struct wiphy_wowlan_support wlcore_wowlan_support = {
+	.flags = WIPHY_WOWLAN_ANY,
+	.n_patterns = WL1271_MAX_RX_FILTERS,
+	.pattern_min_len = 1,
+	.pattern_max_len = WL1271_RX_FILTER_MAX_PATTERN_SIZE,
+};
+#endif
+
 static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 {
 	struct wl1271 *wl = context;
@@ -6071,14 +6080,8 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 	if (!ret) {
 		wl->irq_wake_enabled = true;
 		device_init_wakeup(wl->dev, 1);
-		if (pdata->pwr_in_suspend) {
-			wl->hw->wiphy->wowlan.flags = WIPHY_WOWLAN_ANY;
-			wl->hw->wiphy->wowlan.n_patterns =
-				WL1271_MAX_RX_FILTERS;
-			wl->hw->wiphy->wowlan.pattern_min_len = 1;
-			wl->hw->wiphy->wowlan.pattern_max_len =
-				WL1271_RX_FILTER_MAX_PATTERN_SIZE;
-		}
+		if (pdata->pwr_in_suspend)
+			wl->hw->wiphy->wowlan = &wlcore_wowlan_support;
 	}
 #endif
 	disable_irq(wl->irq);
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 6dd19593e333..6169fca216b4 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2654,7 +2654,7 @@ struct wiphy {
 	u32 hw_version;
 
 #ifdef CONFIG_PM
-	struct wiphy_wowlan_support wowlan;
+	const struct wiphy_wowlan_support *wowlan;
 	struct cfg80211_wowlan *wowlan_config;
 #endif
 
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 1998f1475267..626c83c042d7 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -686,8 +686,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		return -EINVAL;
 
 #ifdef CONFIG_PM
-	if ((hw->wiphy->wowlan.flags || hw->wiphy->wowlan.n_patterns) &&
-	    (!local->ops->suspend || !local->ops->resume))
+	if (hw->wiphy->wowlan && (!local->ops->suspend || !local->ops->resume))
 		return -EINVAL;
 #endif
 
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 41cec1776f4f..f553b9484c1e 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -449,8 +449,13 @@ int wiphy_register(struct wiphy *wiphy)
 	u16 ifmodes = wiphy->interface_modes;
 
 #ifdef CONFIG_PM
-	if (WARN_ON((wiphy->wowlan.flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) &&
-		    !(wiphy->wowlan.flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY)))
+	if (WARN_ON(wiphy->wowlan &&
+		    (wiphy->wowlan->flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) &&
+		    !(wiphy->wowlan->flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY)))
+		return -EINVAL;
+	if (WARN_ON(wiphy->wowlan &&
+		    !wiphy->wowlan->flags && !wiphy->wowlan->n_patterns &&
+		    !wiphy->wowlan->tcp))
 		return -EINVAL;
 #endif
 
@@ -540,12 +545,11 @@ int wiphy_register(struct wiphy *wiphy)
 	}
 
 #ifdef CONFIG_PM
-	if (rdev->wiphy.wowlan.n_patterns) {
-		if (WARN_ON(!rdev->wiphy.wowlan.pattern_min_len ||
-			    rdev->wiphy.wowlan.pattern_min_len >
-			    rdev->wiphy.wowlan.pattern_max_len))
-			return -EINVAL;
-	}
+	if (WARN_ON(rdev->wiphy.wowlan && rdev->wiphy.wowlan->n_patterns &&
+		    (!rdev->wiphy.wowlan->pattern_min_len ||
+		     rdev->wiphy.wowlan->pattern_min_len >
+				rdev->wiphy.wowlan->pattern_max_len)))
+		return -EINVAL;
 #endif
 
 	/* check and set up bitrates */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 31d265f36d2c..7ee9af3283a8 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -908,7 +908,7 @@ nla_put_failure:
 static int nl80211_send_wowlan_tcp_caps(struct cfg80211_registered_device *rdev,
 					struct sk_buff *msg)
 {
-	const struct wiphy_wowlan_tcp_support *tcp = rdev->wiphy.wowlan.tcp;
+	const struct wiphy_wowlan_tcp_support *tcp = rdev->wiphy.wowlan->tcp;
 	struct nlattr *nl_tcp;
 
 	if (!tcp)
@@ -951,37 +951,37 @@ static int nl80211_send_wowlan(struct sk_buff *msg,
 {
 	struct nlattr *nl_wowlan;
 
-	if (!dev->wiphy.wowlan.flags && !dev->wiphy.wowlan.n_patterns)
+	if (!dev->wiphy.wowlan)
 		return 0;
 
 	nl_wowlan = nla_nest_start(msg, NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED);
 	if (!nl_wowlan)
 		return -ENOBUFS;
 
-	if (((dev->wiphy.wowlan.flags & WIPHY_WOWLAN_ANY) &&
+	if (((dev->wiphy.wowlan->flags & WIPHY_WOWLAN_ANY) &&
 	     nla_put_flag(msg, NL80211_WOWLAN_TRIG_ANY)) ||
-	    ((dev->wiphy.wowlan.flags & WIPHY_WOWLAN_DISCONNECT) &&
+	    ((dev->wiphy.wowlan->flags & WIPHY_WOWLAN_DISCONNECT) &&
 	     nla_put_flag(msg, NL80211_WOWLAN_TRIG_DISCONNECT)) ||
-	    ((dev->wiphy.wowlan.flags & WIPHY_WOWLAN_MAGIC_PKT) &&
+	    ((dev->wiphy.wowlan->flags & WIPHY_WOWLAN_MAGIC_PKT) &&
 	     nla_put_flag(msg, NL80211_WOWLAN_TRIG_MAGIC_PKT)) ||
-	    ((dev->wiphy.wowlan.flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY) &&
+	    ((dev->wiphy.wowlan->flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY) &&
 	     nla_put_flag(msg, NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED)) ||
-	    ((dev->wiphy.wowlan.flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) &&
+	    ((dev->wiphy.wowlan->flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) &&
 	     nla_put_flag(msg, NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE)) ||
-	    ((dev->wiphy.wowlan.flags & WIPHY_WOWLAN_EAP_IDENTITY_REQ) &&
+	    ((dev->wiphy.wowlan->flags & WIPHY_WOWLAN_EAP_IDENTITY_REQ) &&
 	     nla_put_flag(msg, NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST)) ||
-	    ((dev->wiphy.wowlan.flags & WIPHY_WOWLAN_4WAY_HANDSHAKE) &&
+	    ((dev->wiphy.wowlan->flags & WIPHY_WOWLAN_4WAY_HANDSHAKE) &&
 	     nla_put_flag(msg, NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE)) ||
-	    ((dev->wiphy.wowlan.flags & WIPHY_WOWLAN_RFKILL_RELEASE) &&
+	    ((dev->wiphy.wowlan->flags & WIPHY_WOWLAN_RFKILL_RELEASE) &&
 	     nla_put_flag(msg, NL80211_WOWLAN_TRIG_RFKILL_RELEASE)))
 		return -ENOBUFS;
 
-	if (dev->wiphy.wowlan.n_patterns) {
+	if (dev->wiphy.wowlan->n_patterns) {
 		struct nl80211_wowlan_pattern_support pat = {
-			.max_patterns = dev->wiphy.wowlan.n_patterns,
-			.min_pattern_len = dev->wiphy.wowlan.pattern_min_len,
-			.max_pattern_len = dev->wiphy.wowlan.pattern_max_len,
-			.max_pkt_offset = dev->wiphy.wowlan.max_pkt_offset,
+			.max_patterns = dev->wiphy.wowlan->n_patterns,
+			.min_pattern_len = dev->wiphy.wowlan->pattern_min_len,
+			.max_pattern_len = dev->wiphy.wowlan->pattern_max_len,
+			.max_pkt_offset = dev->wiphy.wowlan->max_pkt_offset,
 		};
 
 		if (nla_put(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN,
@@ -7580,8 +7580,7 @@ static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info)
 	void *hdr;
 	u32 size = NLMSG_DEFAULT_SIZE;
 
-	if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns &&
-	    !rdev->wiphy.wowlan.tcp)
+	if (!rdev->wiphy.wowlan)
 		return -EOPNOTSUPP;
 
 	if (rdev->wiphy.wowlan_config && rdev->wiphy.wowlan_config->tcp) {
@@ -7654,7 +7653,7 @@ static int nl80211_parse_wowlan_tcp(struct cfg80211_registered_device *rdev,
 	u32 data_size, wake_size, tokens_size = 0, wake_mask_size;
 	int err, port;
 
-	if (!rdev->wiphy.wowlan.tcp)
+	if (!rdev->wiphy.wowlan->tcp)
 		return -EINVAL;
 
 	err = nla_parse(tb, MAX_NL80211_WOWLAN_TCP,
@@ -7674,16 +7673,16 @@ static int nl80211_parse_wowlan_tcp(struct cfg80211_registered_device *rdev,
 		return -EINVAL;
 
 	data_size = nla_len(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD]);
-	if (data_size > rdev->wiphy.wowlan.tcp->data_payload_max)
+	if (data_size > rdev->wiphy.wowlan->tcp->data_payload_max)
 		return -EINVAL;
 
 	if (nla_get_u32(tb[NL80211_WOWLAN_TCP_DATA_INTERVAL]) >
-			rdev->wiphy.wowlan.tcp->data_interval_max ||
+			rdev->wiphy.wowlan->tcp->data_interval_max ||
 	    nla_get_u32(tb[NL80211_WOWLAN_TCP_DATA_INTERVAL]) == 0)
 		return -EINVAL;
 
 	wake_size = nla_len(tb[NL80211_WOWLAN_TCP_WAKE_PAYLOAD]);
-	if (wake_size > rdev->wiphy.wowlan.tcp->wake_payload_max)
+	if (wake_size > rdev->wiphy.wowlan->tcp->wake_payload_max)
 		return -EINVAL;
 
 	wake_mask_size = nla_len(tb[NL80211_WOWLAN_TCP_WAKE_MASK]);
@@ -7698,13 +7697,13 @@ static int nl80211_parse_wowlan_tcp(struct cfg80211_registered_device *rdev,
 
 		if (!tok->len || tokens_size % tok->len)
 			return -EINVAL;
-		if (!rdev->wiphy.wowlan.tcp->tok)
+		if (!rdev->wiphy.wowlan->tcp->tok)
 			return -EINVAL;
-		if (tok->len > rdev->wiphy.wowlan.tcp->tok->max_len)
+		if (tok->len > rdev->wiphy.wowlan->tcp->tok->max_len)
 			return -EINVAL;
-		if (tok->len < rdev->wiphy.wowlan.tcp->tok->min_len)
+		if (tok->len < rdev->wiphy.wowlan->tcp->tok->min_len)
 			return -EINVAL;
-		if (tokens_size > rdev->wiphy.wowlan.tcp->tok->bufsize)
+		if (tokens_size > rdev->wiphy.wowlan->tcp->tok->bufsize)
 			return -EINVAL;
 		if (tok->offset + tok->len > data_size)
 			return -EINVAL;
@@ -7712,7 +7711,7 @@ static int nl80211_parse_wowlan_tcp(struct cfg80211_registered_device *rdev,
 
 	if (tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ]) {
 		seq = nla_data(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ]);
-		if (!rdev->wiphy.wowlan.tcp->seq)
+		if (!rdev->wiphy.wowlan->tcp->seq)
 			return -EINVAL;
 		if (seq->len == 0 || seq->len > 4)
 			return -EINVAL;
@@ -7793,12 +7792,11 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info)
 	struct nlattr *tb[NUM_NL80211_WOWLAN_TRIG];
 	struct cfg80211_wowlan new_triggers = {};
 	struct cfg80211_wowlan *ntrig;
-	struct wiphy_wowlan_support *wowlan = &rdev->wiphy.wowlan;
+	const struct wiphy_wowlan_support *wowlan = rdev->wiphy.wowlan;
 	int err, i;
 	bool prev_enabled = rdev->wiphy.wowlan_config;
 
-	if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns &&
-	    !rdev->wiphy.wowlan.tcp)
+	if (!wowlan)
 		return -EOPNOTSUPP;
 
 	if (!info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS]) {
-- 
cgit v1.2.3


From 989c6505cdda587f87573bb6828f23964dd3d19b Mon Sep 17 00:00:00 2001
From: Alexander Bondar <alexander.bondar@intel.com>
Date: Thu, 16 May 2013 17:34:17 +0300
Subject: mac80211: Use suitable semantics for beacon availability indication

Currently beacon availability upon association is marked by have_beacon
flag of assoc_data structure that becomes unavailable when association
completes. However beacon availability indication is required also after
association to inform a driver. Currently dtim_period parameter is used
for this purpose. Move have_beacon flag to another structure, persistant
throughout a interface's life cycle. Use suitable sematics for beacon
availability indication.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
[fix another instance of BSS_CHANGED_DTIM_PERIOD in docs]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |  2 +-
 include/net/mac80211.h                      |  8 ++++----
 net/mac80211/ieee80211_i.h                  |  3 ++-
 net/mac80211/mlme.c                         | 20 +++++++++++---------
 net/mac80211/util.c                         |  5 +++--
 5 files changed, 21 insertions(+), 17 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index b807ddac650c..c942eb0bbbeb 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -785,7 +785,7 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 			if (ret)
 				IWL_ERR(mvm, "failed to update quotas\n");
 		}
-	} else if (changes & BSS_CHANGED_DTIM_PERIOD) {
+	} else if (changes & BSS_CHANGED_BEACON_INFO) {
 		/*
 		 * We received a beacon _after_ association so
 		 * remove the session protection.
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index cb37f82d8d09..a405a7a9775c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -217,8 +217,8 @@ struct ieee80211_chanctx_conf {
  * @BSS_CHANGED_TXPOWER: TX power setting changed for this interface
  * @BSS_CHANGED_P2P_PS: P2P powersave settings (CTWindow, opportunistic PS)
  *	changed (currently only in P2P client mode, GO mode will be later)
- * @BSS_CHANGED_DTIM_PERIOD: the DTIM period value was changed (set when
- *	it becomes valid, managed mode only)
+ * @BSS_CHANGED_BEACON_INFO: Data from the AP's beacon became available:
+ *	currently dtim_period only is under consideration.
  * @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed,
  *	note that this is only called when it changes after the channel
  *	context had been assigned.
@@ -244,7 +244,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_PS			= 1<<17,
 	BSS_CHANGED_TXPOWER		= 1<<18,
 	BSS_CHANGED_P2P_PS		= 1<<19,
-	BSS_CHANGED_DTIM_PERIOD		= 1<<20,
+	BSS_CHANGED_BEACON_INFO		= 1<<20,
 	BSS_CHANGED_BANDWIDTH		= 1<<21,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
@@ -288,7 +288,7 @@ enum ieee80211_rssi_event {
  *	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
  * @dtim_period: num of beacons before the next DTIM, for beaconing,
  *	valid in station mode only if after the driver was notified
- *	with the %BSS_CHANGED_DTIM_PERIOD flag, will be non-zero then.
+ *	with the %BSS_CHANGED_BEACON_INFO flag, will be non-zero then.
  * @sync_tsf: last beacon's/probe response's TSF timestamp (could be old
  *	as it may have been received during scanning long ago). If the
  *	HW flag %IEEE80211_HW_TIMING_BEACON_ONLY is set, then this can
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 9eed6f1d1614..7a6f1a0207ec 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -366,7 +366,7 @@ struct ieee80211_mgd_assoc_data {
 	u8 ssid_len;
 	u8 supp_rates_len;
 	bool wmm, uapsd;
-	bool have_beacon, need_beacon;
+	bool need_beacon;
 	bool synced;
 	bool timeout_started;
 
@@ -404,6 +404,7 @@ struct ieee80211_if_managed {
 
 	bool powersave; /* powersave requested for this iface */
 	bool broken_ap; /* AP is broken -- turn off powersave */
+	bool have_beacon;
 	u8 dtim_period;
 	enum ieee80211_smps_mode req_smps, /* requested smps mode */
 				 driver_smps_mode; /* smps mode request */
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index aa5cd2e138be..ad9bb9e10cbb 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1360,7 +1360,7 @@ static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
 			  IEEE80211_STA_CONNECTION_POLL))
 		return false;
 
-	if (!sdata->vif.bss_conf.dtim_period)
+	if (!mgd->have_beacon)
 		return false;
 
 	rcu_read_lock();
@@ -1771,7 +1771,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 
 	ieee80211_led_assoc(local, 1);
 
-	if (sdata->u.mgd.assoc_data->have_beacon) {
+	if (sdata->u.mgd.have_beacon) {
 		/*
 		 * If the AP is buggy we may get here with no DTIM period
 		 * known, so assume it's 1 which is the only safe assumption
@@ -1779,7 +1779,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 		 * probably just won't work at all.
 		 */
 		bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
-		bss_info_changed |= BSS_CHANGED_DTIM_PERIOD;
+		bss_info_changed |= BSS_CHANGED_BEACON_INFO;
 	} else {
 		bss_conf->dtim_period = 0;
 	}
@@ -1903,6 +1903,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	del_timer_sync(&sdata->u.mgd.chswitch_timer);
 
 	sdata->vif.bss_conf.dtim_period = 0;
+	ifmgd->have_beacon = false;
 
 	ifmgd->flags = 0;
 	ieee80211_vif_release_channel(sdata);
@@ -2877,7 +2878,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 			const struct ieee80211_tim_ie *tim_ie = elems.tim;
 			ifmgd->dtim_period = tim_ie->dtim_period;
 		}
-		ifmgd->assoc_data->have_beacon = true;
+		ifmgd->have_beacon = true;
 		ifmgd->assoc_data->need_beacon = false;
 		if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
 			sdata->vif.bss_conf.sync_tsf =
@@ -3059,7 +3060,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	 * If we haven't had a beacon before, tell the driver about the
 	 * DTIM period (and beacon timing if desired) now.
 	 */
-	if (!bss_conf->dtim_period) {
+	if (!ifmgd->have_beacon) {
 		/* a few bogus AP send dtim_period = 0 or no TIM IE */
 		if (elems.tim)
 			bss_conf->dtim_period = elems.tim->dtim_period ?: 1;
@@ -3078,7 +3079,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 				sdata->vif.bss_conf.sync_dtim_count = 0;
 		}
 
-		changed |= BSS_CHANGED_DTIM_PERIOD;
+		changed |= BSS_CHANGED_BEACON_INFO;
+		ifmgd->have_beacon = true;
 
 		mutex_lock(&local->iflist_mtx);
 		ieee80211_recalc_ps(local, -1);
@@ -3424,8 +3426,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
 
 	if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
 	    time_after(jiffies, ifmgd->assoc_data->timeout)) {
-		if ((ifmgd->assoc_data->need_beacon &&
-		     !ifmgd->assoc_data->have_beacon) ||
+		if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) ||
 		    ieee80211_do_assoc(sdata)) {
 			u8 bssid[ETH_ALEN];
 
@@ -4193,6 +4194,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 
 	ifmgd->assoc_data = assoc_data;
 	ifmgd->dtim_period = 0;
+	ifmgd->have_beacon = false;
 
 	err = ieee80211_prep_connection(sdata, req->bss, true);
 	if (err)
@@ -4224,7 +4226,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 			ifmgd->dtim_period = tim->dtim_period;
 			dtim_count = tim->dtim_count;
 		}
-		assoc_data->have_beacon = true;
+		ifmgd->have_beacon = true;
 		assoc_data->timeout = jiffies;
 		assoc_data->timeout_started = true;
 
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 89a83770d152..5a6c1351d1d3 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1584,8 +1584,9 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 				   BSS_CHANGED_ARP_FILTER |
 				   BSS_CHANGED_PS;
 
-			if (sdata->u.mgd.dtim_period)
-				changed |= BSS_CHANGED_DTIM_PERIOD;
+			/* Re-send beacon info report to the driver */
+			if (sdata->u.mgd.have_beacon)
+				changed |= BSS_CHANGED_BEACON_INFO;
 
 			sdata_lock(sdata);
 			ieee80211_bss_info_change_notify(sdata, changed);
-- 
cgit v1.2.3


From ad194288355a9e4b76c7404d3d5ecbeec8c532a9 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 10 Jun 2013 13:27:06 +0200
Subject: iwlwifi: mvm: remove iwl_mvm_dbgfs_set_fw_dbg_log declaration

This function doesn't actually exist, remove its declaration.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mvm.h | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 4e10aae71038..ad39a22f79fa 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -689,16 +689,11 @@ void iwl_mvm_bt_coex_vif_assoc(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
 void
 iwl_mvm_beacon_filter_debugfs_parameters(struct ieee80211_vif *vif,
 					 struct iwl_beacon_filter_cmd *cmd);
-int iwl_mvm_dbgfs_set_fw_dbg_log(struct iwl_mvm *mvm);
 #else
 static inline void
 iwl_mvm_beacon_filter_debugfs_parameters(struct ieee80211_vif *vif,
 					 struct iwl_beacon_filter_cmd *cmd)
 {}
-static inline int iwl_mvm_dbgfs_set_fw_dbg_log(struct iwl_mvm *mvm)
-{
-	return 0;
-}
 #endif
 int iwl_mvm_enable_beacon_filter(struct iwl_mvm *mvm,
 				 struct ieee80211_vif *vif);
-- 
cgit v1.2.3


From c2ff8cad64233b539c71a27e2a6e324001143ef0 Mon Sep 17 00:00:00 2001
From: Antonio Quartulli <antonio@open-mesh.com>
Date: Tue, 11 Jun 2013 14:20:01 +0200
Subject: brcm80211: make mgmt_tx in brcmfmac accept a NULL channel

cfg80211 passes a NULL channel to mgmt_tx if the frame has
to be sent on the one currently in use by the device.
Make the implementation of mgmt_tx correctly handle this
case

Cc: brcm80211-dev-list@broadcom.com
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 6d758f285352..8bd256ba66ab 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -3917,6 +3917,7 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 	struct brcmf_fil_af_params_le *af_params;
 	bool ack;
 	s32 chan_nr;
+	u32 freq;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -3929,6 +3930,8 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 		return -EPERM;
 	}
 
+	vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
+
 	if (ieee80211_is_probe_resp(mgmt->frame_control)) {
 		/* Right now the only reason to get a probe response */
 		/* is for p2p listen response or for p2p GO from     */
@@ -3944,7 +3947,6 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 		ie_offset =  DOT11_MGMT_HDR_LEN +
 			     DOT11_BCN_PRB_FIXED_LEN;
 		ie_len = len - ie_offset;
-		vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
 		if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif)
 			vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
 		err = brcmf_vif_set_mgmt_ie(vif,
@@ -3968,8 +3970,15 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 		memcpy(&af_params->bssid[0], &mgmt->bssid[0], ETH_ALEN);
 		/* Add the length exepted for 802.11 header  */
 		action_frame->len = cpu_to_le16(len - DOT11_MGMT_HDR_LEN);
-		/* Add the channel */
-		chan_nr = ieee80211_frequency_to_channel(chan->center_freq);
+		/* Add the channel. Use the one specified as parameter if any or
+		 * the current one (got from the firmware) otherwise
+		 */
+		if (chan)
+			freq = chan->center_freq;
+		else
+			brcmf_fil_cmd_int_get(vif->ifp, BRCMF_C_GET_CHANNEL,
+					      &freq);
+		chan_nr = ieee80211_frequency_to_channel(freq);
 		af_params->channel = cpu_to_le32(chan_nr);
 
 		memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN],
-- 
cgit v1.2.3


From bfd634d01e02071404e3e36e3946728009ed023f Mon Sep 17 00:00:00 2001
From: Antonio Quartulli <antonio@open-mesh.com>
Date: Tue, 11 Jun 2013 14:20:02 +0200
Subject: ath6kl: make mgmt_tx accept a NULL channel

cfg80211 passes a NULL channel to mgmt_tx if the frame has
to be sent on the one currently in use by the device.
Make the implementation of mgmt_tx correctly handle this
case

Cc: Nicolas Cavallari <Nicolas.Cavallari@lri.fr>
Acked-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index f7995b2b12a4..2437ad26949d 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -3175,10 +3175,21 @@ static int ath6kl_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 {
 	struct ath6kl_vif *vif = ath6kl_vif_from_wdev(wdev);
 	struct ath6kl *ar = ath6kl_priv(vif->ndev);
-	u32 id;
+	u32 id, freq;
 	const struct ieee80211_mgmt *mgmt;
 	bool more_data, queued;
 
+	/* default to the current channel, but use the one specified as argument
+	 * if any
+	 */
+	freq = vif->ch_hint;
+	if (chan)
+		freq = chan->center_freq;
+
+	/* never send freq zero to the firmware */
+	if (WARN_ON(freq == 0))
+		return -EINVAL;
+
 	mgmt = (const struct ieee80211_mgmt *) buf;
 	if (vif->nw_type == AP_NETWORK && test_bit(CONNECTED, &vif->flags) &&
 	    ieee80211_is_probe_resp(mgmt->frame_control) &&
@@ -3188,8 +3199,7 @@ static int ath6kl_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 		 * command to allow the target to fill in the generic IEs.
 		 */
 		*cookie = 0; /* TX status not supported */
-		return ath6kl_send_go_probe_resp(vif, buf, len,
-						 chan->center_freq);
+		return ath6kl_send_go_probe_resp(vif, buf, len, freq);
 	}
 
 	id = vif->send_action_id++;
@@ -3205,17 +3215,14 @@ static int ath6kl_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 
 	/* AP mode Power saving processing */
 	if (vif->nw_type == AP_NETWORK) {
-		queued = ath6kl_mgmt_powersave_ap(vif,
-					id, chan->center_freq,
-					wait, buf,
-					len, &more_data, no_cck);
+		queued = ath6kl_mgmt_powersave_ap(vif, id, freq, wait, buf, len,
+						  &more_data, no_cck);
 		if (queued)
 			return 0;
 	}
 
-	return ath6kl_wmi_send_mgmt_cmd(ar->wmi, vif->fw_vif_idx, id,
-					chan->center_freq, wait,
-					buf, len, no_cck);
+	return ath6kl_wmi_send_mgmt_cmd(ar->wmi, vif->fw_vif_idx, id, freq,
+					wait, buf, len, no_cck);
 }
 
 static void ath6kl_mgmt_frame_register(struct wiphy *wiphy,
-- 
cgit v1.2.3


From 629d0fa0da40958809e6577350c903b9368ef672 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Mon, 10 Jun 2013 13:42:40 +0300
Subject: iwlwifi: mvm: remove unused wait_for_ba field

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/sta.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.h b/drivers/net/wireless/iwlwifi/mvm/sta.h
index 3efa0a0cc987..94b265eb32b8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.h
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.h
@@ -250,7 +250,6 @@ enum iwl_mvm_agg_state {
  *	the first packet to be sent in legacy HW queue in Tx AGG stop flow.
  *	Basically when next_reclaimed reaches ssn, we can tell mac80211 that
  *	we are ready to finish the Tx AGG stop / start flow.
- * @wait_for_ba: Expect block-ack before next Tx reply
  */
 struct iwl_mvm_tid_data {
 	u16 seq_number;
@@ -260,7 +259,6 @@ struct iwl_mvm_tid_data {
 	enum iwl_mvm_agg_state state;
 	u16 txq_id;
 	u16 ssn;
-	bool wait_for_ba;
 };
 
 /**
-- 
cgit v1.2.3


From 0742a75a72ee52a7424554a1d49882dd9db195e3 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Mon, 10 Jun 2013 14:10:33 +0300
Subject: iwlwifi: mvm: fix irrelevant comment

This code moved and is now far away from the code that takes
the mutex.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index f2976901b1d5..795f65cf6332 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -639,8 +639,7 @@ static void iwl_mvm_prepare_mac_removal(struct iwl_mvm *mvm,
 		 * By now, all the AC queues are empty. The AGG queues are
 		 * empty too. We already got all the Tx responses for all the
 		 * packets in the queues. The drain work can have been
-		 * triggered. Flush it. This work item takes the mutex, so kill
-		 * it before we take it.
+		 * triggered. Flush it.
 		 */
 		flush_work(&mvm->sta_drained_wk);
 	}
-- 
cgit v1.2.3


From 476a9e09cbe37bad93de6e460b76f89f3ad22c9b Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue, 11 Jun 2013 15:17:21 +0300
Subject: iwlwifi: ignore 0-length PHY DB sections

This can happen during development but can cause problems,
WARN (once) and go on.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Guy Cohen <guy.cohen@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-phy-db.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-phy-db.c b/drivers/net/wireless/iwlwifi/iwl-phy-db.c
index 25745daa0d5d..84acb4deca8a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-phy-db.c
+++ b/drivers/net/wireless/iwlwifi/iwl-phy-db.c
@@ -413,6 +413,9 @@ static int iwl_phy_db_send_all_channel_groups(
 		if (!entry)
 			return -EINVAL;
 
+		if (WARN_ON_ONCE(!entry->size))
+			continue;
+
 		/* Send the requested PHY DB section */
 		err = iwl_send_phy_db_cmd(phy_db,
 					  type,
-- 
cgit v1.2.3


From 565f5a942b0391b528c5fc6f3c535900f4617816 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 5 Jun 2013 17:36:26 +0200
Subject: iwlwifi: include export.h instead of module.h

We only need EXPORT_SYMBOL_GPL, none of the other things
from module.h, so only include export.h.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-drv.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.h b/drivers/net/wireless/iwlwifi/iwl-drv.h
index 7d1450916308..429337a2b9a1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.h
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.h
@@ -62,8 +62,7 @@
 
 #ifndef __iwl_drv_h__
 #define __iwl_drv_h__
-
-#include <linux/module.h>
+#include <linux/export.h>
 
 /* for all modules */
 #define DRV_NAME        "iwlwifi"
-- 
cgit v1.2.3


From 5af01772ee1d6e96849adf728ff837bd71b119c0 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 9 Jun 2013 12:59:24 +0300
Subject: iwlwifi: mvm: properly tell the fw that a STA is awake

The firmware API wasn't being used correctly, fix that.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/sta.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index 2278858d5658..f986eb50c4a4 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -1292,17 +1292,11 @@ void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm,
 	struct iwl_mvm_add_sta_cmd cmd = {
 		.add_modify = STA_MODE_MODIFY,
 		.sta_id = mvmsta->sta_id,
-		.modify_mask = STA_MODIFY_SLEEPING_STA_TX_COUNT,
-		.sleep_state_flags = cpu_to_le16(STA_SLEEP_STATE_AWAKE),
+		.station_flags_msk = cpu_to_le32(STA_FLG_PS),
 		.mac_id_n_color = cpu_to_le32(mvmsta->mac_id_n_color),
 	};
 	int ret;
 
-	/*
-	 * Same modify mask for sleep_tx_count and sleep_state_flags but this
-	 * should be fine since if we set the STA as "awake", then
-	 * sleep_tx_count is not relevant.
-	 */
 	ret = iwl_mvm_send_cmd_pdu(mvm, ADD_STA, CMD_ASYNC, sizeof(cmd), &cmd);
 	if (ret)
 		IWL_ERR(mvm, "Failed to send ADD_STA command (%d)\n", ret);
-- 
cgit v1.2.3


From 837fb69f10588caafc883c4473a864660e1403ce Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 9 Jun 2013 13:00:12 +0300
Subject: iwlwifi: mvm: don't set the MCAST queue in STA's queue list

The MCAST queue should be enabled after DTIM only.
According to fw API, the MCAST must not be attached to any
station, but should appear in the mcast_qid of the AP's
mac context only.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 5 +----
 drivers/net/wireless/iwlwifi/mvm/sta.c      | 3 ---
 2 files changed, 1 insertion(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
index 46c7c0507c25..273b0cc197ab 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
@@ -193,14 +193,11 @@ static void iwl_mvm_mac_iface_iterator(void *_data, u8 *mac,
 u32 iwl_mvm_mac_get_queues_mask(struct iwl_mvm *mvm,
 				struct ieee80211_vif *vif)
 {
-	u32 qmask, ac;
+	u32 qmask = 0, ac;
 
 	if (vif->type == NL80211_IFTYPE_P2P_DEVICE)
 		return BIT(IWL_MVM_OFFCHANNEL_QUEUE);
 
-	qmask = (vif->cab_queue != IEEE80211_INVAL_HW_QUEUE) ?
-		BIT(vif->cab_queue) : 0;
-
 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
 		if (vif->hw_queue[ac] != IEEE80211_INVAL_HW_QUEUE)
 			qmask |= BIT(vif->hw_queue[ac]);
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index f986eb50c4a4..62fe5209093b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -229,9 +229,6 @@ int iwl_mvm_add_sta(struct iwl_mvm *mvm,
 		if (vif->hw_queue[i] != IEEE80211_INVAL_HW_QUEUE)
 			mvm_sta->tfd_queue_msk |= BIT(vif->hw_queue[i]);
 
-	if (vif->cab_queue != IEEE80211_INVAL_HW_QUEUE)
-		mvm_sta->tfd_queue_msk |= BIT(vif->cab_queue);
-
 	/* for HW restart - need to reset the seq_number etc... */
 	memset(mvm_sta->tid_data, 0, sizeof(mvm_sta->tid_data));
 
-- 
cgit v1.2.3


From 8eb3871076875f247483f4a1fe6713e6d440c53e Mon Sep 17 00:00:00 2001
From: Ilan Peer <ilan.peer@intel.com>
Date: Sat, 1 Jun 2013 20:17:18 +0300
Subject: iwlwifi: mvm: Update the supported interface combinations

iwlmvm does not support concurrent operation of AP with P2P Client/GO.
Update the interface limits to reflect that iwlmvm supports only
concurrent operation of station with AP and P2P Client/GO.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 1767a8849591..f091cf24b96c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -81,12 +81,12 @@
 static const struct ieee80211_iface_limit iwl_mvm_limits[] = {
 	{
 		.max = 1,
-		.types = BIT(NL80211_IFTYPE_STATION) |
-			BIT(NL80211_IFTYPE_AP),
+		.types = BIT(NL80211_IFTYPE_STATION),
 	},
 	{
 		.max = 1,
-		.types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
+		.types = BIT(NL80211_IFTYPE_AP) |
+			BIT(NL80211_IFTYPE_P2P_CLIENT) |
 			BIT(NL80211_IFTYPE_P2P_GO),
 	},
 	{
-- 
cgit v1.2.3


From 5e3dd157d7e70f0e3cea3f2573ed69fb156a19d5 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kvalo@qca.qualcomm.com>
Date: Wed, 12 Jun 2013 20:52:10 +0300
Subject: ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices

Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices.
A major difference from ath9k is that there's now a firmware and
that's why we had to implement a new driver.

The wiki page for the driver is:

http://wireless.kernel.org/en/users/Drivers/ath10k

The driver has had many authors, they are listed here alphabetically:

Bartosz Markowski <bartosz.markowski@tieto.com>
Janusz Dziedzic <janusz.dziedzic@tieto.com>
Kalle Valo <kvalo@qca.qualcomm.com>
Marek Kwaczynski <marek.kwaczynski@tieto.com>
Marek Puzyniak <marek.puzyniak@tieto.com>
Michal Kazior <michal.kazior@tieto.com>
Sujith Manoharan <c_manoha@qca.qualcomm.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/Kconfig            |    1 +
 drivers/net/wireless/ath/Makefile           |    1 +
 drivers/net/wireless/ath/ath10k/Kconfig     |   39 +
 drivers/net/wireless/ath/ath10k/Makefile    |   20 +
 drivers/net/wireless/ath/ath10k/bmi.c       |  295 +++
 drivers/net/wireless/ath/ath10k/bmi.h       |  224 ++
 drivers/net/wireless/ath/ath10k/ce.c        | 1189 +++++++++++
 drivers/net/wireless/ath/ath10k/ce.h        |  516 +++++
 drivers/net/wireless/ath/ath10k/core.c      |  665 ++++++
 drivers/net/wireless/ath/ath10k/core.h      |  369 ++++
 drivers/net/wireless/ath/ath10k/debug.c     |  503 +++++
 drivers/net/wireless/ath/ath10k/debug.h     |   90 +
 drivers/net/wireless/ath/ath10k/hif.h       |  137 ++
 drivers/net/wireless/ath/ath10k/htc.c       | 1000 +++++++++
 drivers/net/wireless/ath/ath10k/htc.h       |  368 ++++
 drivers/net/wireless/ath/ath10k/htt.c       |  152 ++
 drivers/net/wireless/ath/ath10k/htt.h       | 1338 ++++++++++++
 drivers/net/wireless/ath/ath10k/htt_rx.c    | 1167 ++++++++++
 drivers/net/wireless/ath/ath10k/htt_tx.c    |  510 +++++
 drivers/net/wireless/ath/ath10k/hw.h        |  304 +++
 drivers/net/wireless/ath/ath10k/mac.c       | 3066 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/mac.h       |   61 +
 drivers/net/wireless/ath/ath10k/pci.c       | 2506 ++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/pci.h       |  355 ++++
 drivers/net/wireless/ath/ath10k/rx_desc.h   |  990 +++++++++
 drivers/net/wireless/ath/ath10k/targaddrs.h |  449 ++++
 drivers/net/wireless/ath/ath10k/trace.c     |   20 +
 drivers/net/wireless/ath/ath10k/trace.h     |  170 ++
 drivers/net/wireless/ath/ath10k/txrx.c      |  417 ++++
 drivers/net/wireless/ath/ath10k/txrx.h      |   39 +
 drivers/net/wireless/ath/ath10k/wmi.c       | 2081 ++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h       | 3052 ++++++++++++++++++++++++++
 32 files changed, 22094 insertions(+)
 create mode 100644 drivers/net/wireless/ath/ath10k/Kconfig
 create mode 100644 drivers/net/wireless/ath/ath10k/Makefile
 create mode 100644 drivers/net/wireless/ath/ath10k/bmi.c
 create mode 100644 drivers/net/wireless/ath/ath10k/bmi.h
 create mode 100644 drivers/net/wireless/ath/ath10k/ce.c
 create mode 100644 drivers/net/wireless/ath/ath10k/ce.h
 create mode 100644 drivers/net/wireless/ath/ath10k/core.c
 create mode 100644 drivers/net/wireless/ath/ath10k/core.h
 create mode 100644 drivers/net/wireless/ath/ath10k/debug.c
 create mode 100644 drivers/net/wireless/ath/ath10k/debug.h
 create mode 100644 drivers/net/wireless/ath/ath10k/hif.h
 create mode 100644 drivers/net/wireless/ath/ath10k/htc.c
 create mode 100644 drivers/net/wireless/ath/ath10k/htc.h
 create mode 100644 drivers/net/wireless/ath/ath10k/htt.c
 create mode 100644 drivers/net/wireless/ath/ath10k/htt.h
 create mode 100644 drivers/net/wireless/ath/ath10k/htt_rx.c
 create mode 100644 drivers/net/wireless/ath/ath10k/htt_tx.c
 create mode 100644 drivers/net/wireless/ath/ath10k/hw.h
 create mode 100644 drivers/net/wireless/ath/ath10k/mac.c
 create mode 100644 drivers/net/wireless/ath/ath10k/mac.h
 create mode 100644 drivers/net/wireless/ath/ath10k/pci.c
 create mode 100644 drivers/net/wireless/ath/ath10k/pci.h
 create mode 100644 drivers/net/wireless/ath/ath10k/rx_desc.h
 create mode 100644 drivers/net/wireless/ath/ath10k/targaddrs.h
 create mode 100644 drivers/net/wireless/ath/ath10k/trace.c
 create mode 100644 drivers/net/wireless/ath/ath10k/trace.h
 create mode 100644 drivers/net/wireless/ath/ath10k/txrx.c
 create mode 100644 drivers/net/wireless/ath/ath10k/txrx.h
 create mode 100644 drivers/net/wireless/ath/ath10k/wmi.c
 create mode 100644 drivers/net/wireless/ath/ath10k/wmi.h

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index 2c02b4e84094..1abf1d421173 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -31,5 +31,6 @@ source "drivers/net/wireless/ath/carl9170/Kconfig"
 source "drivers/net/wireless/ath/ath6kl/Kconfig"
 source "drivers/net/wireless/ath/ar5523/Kconfig"
 source "drivers/net/wireless/ath/wil6210/Kconfig"
+source "drivers/net/wireless/ath/ath10k/Kconfig"
 
 endif
diff --git a/drivers/net/wireless/ath/Makefile b/drivers/net/wireless/ath/Makefile
index 97b964ded2be..fb05cfd19361 100644
--- a/drivers/net/wireless/ath/Makefile
+++ b/drivers/net/wireless/ath/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_CARL9170)		+= carl9170/
 obj-$(CONFIG_ATH6KL)		+= ath6kl/
 obj-$(CONFIG_AR5523)		+= ar5523/
 obj-$(CONFIG_WIL6210)		+= wil6210/
+obj-$(CONFIG_ATH10K)		+= ath10k/
 
 obj-$(CONFIG_ATH_COMMON)	+= ath.o
 
diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
new file mode 100644
index 000000000000..cde58fe96254
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -0,0 +1,39 @@
+config ATH10K
+        tristate "Atheros 802.11ac wireless cards support"
+        depends on MAC80211
+	select ATH_COMMON
+        ---help---
+          This module adds support for wireless adapters based on
+          Atheros IEEE 802.11ac family of chipsets.
+
+          If you choose to build a module, it'll be called ath10k.
+
+config ATH10K_PCI
+	tristate "Atheros ath10k PCI support"
+	depends on ATH10K && PCI
+	---help---
+	  This module adds support for PCIE bus
+
+config ATH10K_DEBUG
+	bool "Atheros ath10k debugging"
+	depends on ATH10K
+	---help---
+	  Enables debug support
+
+	  If unsure, say Y to make it easier to debug problems.
+
+config ATH10K_DEBUGFS
+	bool "Atheros ath10k debugfs support"
+	depends on ATH10K
+	---help---
+	  Enabled debugfs support
+
+	  If unsure, say Y to make it easier to debug problems.
+
+config ATH10K_TRACING
+	bool "Atheros ath10k tracing support"
+	depends on ATH10K
+	depends on EVENT_TRACING
+	---help---
+	  Select this to ath10k use tracing infrastructure.
+
diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
new file mode 100644
index 000000000000..a4179f49ee1f
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/Makefile
@@ -0,0 +1,20 @@
+obj-$(CONFIG_ATH10K) += ath10k_core.o
+ath10k_core-y += mac.o \
+		 debug.o \
+		 core.o \
+		 htc.o \
+		 htt.o \
+		 htt_rx.o \
+		 htt_tx.o \
+		 txrx.o \
+		 wmi.o \
+		 bmi.o
+
+ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
+
+obj-$(CONFIG_ATH10K_PCI) += ath10k_pci.o
+ath10k_pci-y += pci.o \
+		ce.o
+
+# for tracing framework to find trace.h
+CFLAGS_trace.o := -I$(src)
diff --git a/drivers/net/wireless/ath/ath10k/bmi.c b/drivers/net/wireless/ath/ath10k/bmi.c
new file mode 100644
index 000000000000..1a2ef51b69d9
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/bmi.c
@@ -0,0 +1,295 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "bmi.h"
+#include "hif.h"
+#include "debug.h"
+#include "htc.h"
+
+int ath10k_bmi_done(struct ath10k *ar)
+{
+	struct bmi_cmd cmd;
+	u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.done);
+	int ret;
+
+	if (ar->bmi.done_sent) {
+		ath10k_dbg(ATH10K_DBG_CORE, "%s skipped\n", __func__);
+		return 0;
+	}
+
+	ar->bmi.done_sent = true;
+	cmd.id = __cpu_to_le32(BMI_DONE);
+
+	ret = ath10k_hif_exchange_bmi_msg(ar, &cmd, cmdlen, NULL, NULL);
+	if (ret) {
+		ath10k_warn("unable to write to the device: %d\n", ret);
+		return ret;
+	}
+
+	ath10k_dbg(ATH10K_DBG_CORE, "BMI done\n");
+	return 0;
+}
+
+int ath10k_bmi_get_target_info(struct ath10k *ar,
+			       struct bmi_target_info *target_info)
+{
+	struct bmi_cmd cmd;
+	union bmi_resp resp;
+	u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.get_target_info);
+	u32 resplen = sizeof(resp.get_target_info);
+	int ret;
+
+	if (ar->bmi.done_sent) {
+		ath10k_warn("BMI Get Target Info Command disallowed\n");
+		return -EBUSY;
+	}
+
+	cmd.id = __cpu_to_le32(BMI_GET_TARGET_INFO);
+
+	ret = ath10k_hif_exchange_bmi_msg(ar, &cmd, cmdlen, &resp, &resplen);
+	if (ret) {
+		ath10k_warn("unable to get target info from device\n");
+		return ret;
+	}
+
+	if (resplen < sizeof(resp.get_target_info)) {
+		ath10k_warn("invalid get_target_info response length (%d)\n",
+			    resplen);
+		return -EIO;
+	}
+
+	target_info->version = __le32_to_cpu(resp.get_target_info.version);
+	target_info->type    = __le32_to_cpu(resp.get_target_info.type);
+	return 0;
+}
+
+int ath10k_bmi_read_memory(struct ath10k *ar,
+			   u32 address, void *buffer, u32 length)
+{
+	struct bmi_cmd cmd;
+	union bmi_resp resp;
+	u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.read_mem);
+	u32 rxlen;
+	int ret;
+
+	if (ar->bmi.done_sent) {
+		ath10k_warn("command disallowed\n");
+		return -EBUSY;
+	}
+
+	ath10k_dbg(ATH10K_DBG_CORE,
+		   "%s: (device: 0x%p, address: 0x%x, length: %d)\n",
+		   __func__, ar, address, length);
+
+	while (length) {
+		rxlen = min_t(u32, length, BMI_MAX_DATA_SIZE);
+
+		cmd.id            = __cpu_to_le32(BMI_READ_MEMORY);
+		cmd.read_mem.addr = __cpu_to_le32(address);
+		cmd.read_mem.len  = __cpu_to_le32(rxlen);
+
+		ret = ath10k_hif_exchange_bmi_msg(ar, &cmd, cmdlen,
+						  &resp, &rxlen);
+		if (ret) {
+			ath10k_warn("unable to read from the device\n");
+			return ret;
+		}
+
+		memcpy(buffer, resp.read_mem.payload, rxlen);
+		address += rxlen;
+		buffer  += rxlen;
+		length  -= rxlen;
+	}
+
+	return 0;
+}
+
+int ath10k_bmi_write_memory(struct ath10k *ar,
+			    u32 address, const void *buffer, u32 length)
+{
+	struct bmi_cmd cmd;
+	u32 hdrlen = sizeof(cmd.id) + sizeof(cmd.write_mem);
+	u32 txlen;
+	int ret;
+
+	if (ar->bmi.done_sent) {
+		ath10k_warn("command disallowed\n");
+		return -EBUSY;
+	}
+
+	ath10k_dbg(ATH10K_DBG_CORE,
+		   "%s: (device: 0x%p, address: 0x%x, length: %d)\n",
+		   __func__, ar, address, length);
+
+	while (length) {
+		txlen = min(length, BMI_MAX_DATA_SIZE - hdrlen);
+
+		/* copy before roundup to avoid reading beyond buffer*/
+		memcpy(cmd.write_mem.payload, buffer, txlen);
+		txlen = roundup(txlen, 4);
+
+		cmd.id             = __cpu_to_le32(BMI_WRITE_MEMORY);
+		cmd.write_mem.addr = __cpu_to_le32(address);
+		cmd.write_mem.len  = __cpu_to_le32(txlen);
+
+		ret = ath10k_hif_exchange_bmi_msg(ar, &cmd, hdrlen + txlen,
+						  NULL, NULL);
+		if (ret) {
+			ath10k_warn("unable to write to the device\n");
+			return ret;
+		}
+
+		/* fixup roundup() so `length` zeroes out for last chunk */
+		txlen = min(txlen, length);
+
+		address += txlen;
+		buffer  += txlen;
+		length  -= txlen;
+	}
+
+	return 0;
+}
+
+int ath10k_bmi_execute(struct ath10k *ar, u32 address, u32 *param)
+{
+	struct bmi_cmd cmd;
+	union bmi_resp resp;
+	u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.execute);
+	u32 resplen = sizeof(resp.execute);
+	int ret;
+
+	if (ar->bmi.done_sent) {
+		ath10k_warn("command disallowed\n");
+		return -EBUSY;
+	}
+
+	ath10k_dbg(ATH10K_DBG_CORE,
+		   "%s: (device: 0x%p, address: 0x%x, param: %d)\n",
+		   __func__, ar, address, *param);
+
+	cmd.id            = __cpu_to_le32(BMI_EXECUTE);
+	cmd.execute.addr  = __cpu_to_le32(address);
+	cmd.execute.param = __cpu_to_le32(*param);
+
+	ret = ath10k_hif_exchange_bmi_msg(ar, &cmd, cmdlen, &resp, &resplen);
+	if (ret) {
+		ath10k_warn("unable to read from the device\n");
+		return ret;
+	}
+
+	if (resplen < sizeof(resp.execute)) {
+		ath10k_warn("invalid execute response length (%d)\n",
+			    resplen);
+		return ret;
+	}
+
+	*param = __le32_to_cpu(resp.execute.result);
+	return 0;
+}
+
+int ath10k_bmi_lz_data(struct ath10k *ar, const void *buffer, u32 length)
+{
+	struct bmi_cmd cmd;
+	u32 hdrlen = sizeof(cmd.id) + sizeof(cmd.lz_data);
+	u32 txlen;
+	int ret;
+
+	if (ar->bmi.done_sent) {
+		ath10k_warn("command disallowed\n");
+		return -EBUSY;
+	}
+
+	while (length) {
+		txlen = min(length, BMI_MAX_DATA_SIZE - hdrlen);
+
+		WARN_ON_ONCE(txlen & 3);
+
+		cmd.id          = __cpu_to_le32(BMI_LZ_DATA);
+		cmd.lz_data.len = __cpu_to_le32(txlen);
+		memcpy(cmd.lz_data.payload, buffer, txlen);
+
+		ret = ath10k_hif_exchange_bmi_msg(ar, &cmd, hdrlen + txlen,
+						  NULL, NULL);
+		if (ret) {
+			ath10k_warn("unable to write to the device\n");
+			return ret;
+		}
+
+		buffer += txlen;
+		length -= txlen;
+	}
+
+	return 0;
+}
+
+int ath10k_bmi_lz_stream_start(struct ath10k *ar, u32 address)
+{
+	struct bmi_cmd cmd;
+	u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.lz_start);
+	int ret;
+
+	if (ar->bmi.done_sent) {
+		ath10k_warn("command disallowed\n");
+		return -EBUSY;
+	}
+
+	cmd.id            = __cpu_to_le32(BMI_LZ_STREAM_START);
+	cmd.lz_start.addr = __cpu_to_le32(address);
+
+	ret = ath10k_hif_exchange_bmi_msg(ar, &cmd, cmdlen, NULL, NULL);
+	if (ret) {
+		ath10k_warn("unable to Start LZ Stream to the device\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int ath10k_bmi_fast_download(struct ath10k *ar,
+			     u32 address, const void *buffer, u32 length)
+{
+	u8 trailer[4] = {};
+	u32 head_len = rounddown(length, 4);
+	u32 trailer_len = length - head_len;
+	int ret;
+
+	ret = ath10k_bmi_lz_stream_start(ar, address);
+	if (ret)
+		return ret;
+
+	/* copy the last word into a zero padded buffer */
+	if (trailer_len > 0)
+		memcpy(trailer, buffer + head_len, trailer_len);
+
+	ret = ath10k_bmi_lz_data(ar, buffer, head_len);
+	if (ret)
+		return ret;
+
+	if (trailer_len > 0)
+		ret = ath10k_bmi_lz_data(ar, trailer, 4);
+
+	if (ret != 0)
+		return ret;
+
+	/*
+	 * Close compressed stream and open a new (fake) one.
+	 * This serves mainly to flush Target caches.
+	 */
+	ret = ath10k_bmi_lz_stream_start(ar, 0x00);
+
+	return ret;
+}
diff --git a/drivers/net/wireless/ath/ath10k/bmi.h b/drivers/net/wireless/ath/ath10k/bmi.h
new file mode 100644
index 000000000000..32c56aa33a5e
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/bmi.h
@@ -0,0 +1,224 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _BMI_H_
+#define _BMI_H_
+
+#include "core.h"
+
+/*
+ * Bootloader Messaging Interface (BMI)
+ *
+ * BMI is a very simple messaging interface used during initialization
+ * to read memory, write memory, execute code, and to define an
+ * application entry PC.
+ *
+ * It is used to download an application to QCA988x, to provide
+ * patches to code that is already resident on QCA988x, and generally
+ * to examine and modify state.  The Host has an opportunity to use
+ * BMI only once during bootup.  Once the Host issues a BMI_DONE
+ * command, this opportunity ends.
+ *
+ * The Host writes BMI requests to mailbox0, and reads BMI responses
+ * from mailbox0.   BMI requests all begin with a command
+ * (see below for specific commands), and are followed by
+ * command-specific data.
+ *
+ * Flow control:
+ * The Host can only issue a command once the Target gives it a
+ * "BMI Command Credit", using AR8K Counter #4.  As soon as the
+ * Target has completed a command, it issues another BMI Command
+ * Credit (so the Host can issue the next command).
+ *
+ * BMI handles all required Target-side cache flushing.
+ */
+
+/* Maximum data size used for BMI transfers */
+#define BMI_MAX_DATA_SIZE	256
+
+/* len = cmd + addr + length */
+#define BMI_MAX_CMDBUF_SIZE (BMI_MAX_DATA_SIZE + \
+			sizeof(u32) + \
+			sizeof(u32) + \
+			sizeof(u32))
+
+/* BMI Commands */
+
+enum bmi_cmd_id {
+	BMI_NO_COMMAND          = 0,
+	BMI_DONE                = 1,
+	BMI_READ_MEMORY         = 2,
+	BMI_WRITE_MEMORY        = 3,
+	BMI_EXECUTE             = 4,
+	BMI_SET_APP_START       = 5,
+	BMI_READ_SOC_REGISTER   = 6,
+	BMI_READ_SOC_WORD       = 6,
+	BMI_WRITE_SOC_REGISTER  = 7,
+	BMI_WRITE_SOC_WORD      = 7,
+	BMI_GET_TARGET_ID       = 8,
+	BMI_GET_TARGET_INFO     = 8,
+	BMI_ROMPATCH_INSTALL    = 9,
+	BMI_ROMPATCH_UNINSTALL  = 10,
+	BMI_ROMPATCH_ACTIVATE   = 11,
+	BMI_ROMPATCH_DEACTIVATE = 12,
+	BMI_LZ_STREAM_START     = 13, /* should be followed by LZ_DATA */
+	BMI_LZ_DATA             = 14,
+	BMI_NVRAM_PROCESS       = 15,
+};
+
+#define BMI_NVRAM_SEG_NAME_SZ 16
+
+struct bmi_cmd {
+	__le32 id; /* enum bmi_cmd_id */
+	union {
+		struct {
+		} done;
+		struct {
+			__le32 addr;
+			__le32 len;
+		} read_mem;
+		struct {
+			__le32 addr;
+			__le32 len;
+			u8 payload[0];
+		} write_mem;
+		struct {
+			__le32 addr;
+			__le32 param;
+		} execute;
+		struct {
+			__le32 addr;
+		} set_app_start;
+		struct {
+			__le32 addr;
+		} read_soc_reg;
+		struct {
+			__le32 addr;
+			__le32 value;
+		} write_soc_reg;
+		struct {
+		} get_target_info;
+		struct {
+			__le32 rom_addr;
+			__le32 ram_addr; /* or value */
+			__le32 size;
+			__le32 activate; /* 0=install, but dont activate */
+		} rompatch_install;
+		struct {
+			__le32 patch_id;
+		} rompatch_uninstall;
+		struct {
+			__le32 count;
+			__le32 patch_ids[0]; /* length of @count */
+		} rompatch_activate;
+		struct {
+			__le32 count;
+			__le32 patch_ids[0]; /* length of @count */
+		} rompatch_deactivate;
+		struct {
+			__le32 addr;
+		} lz_start;
+		struct {
+			__le32 len; /* max BMI_MAX_DATA_SIZE */
+			u8 payload[0]; /* length of @len */
+		} lz_data;
+		struct {
+			u8 name[BMI_NVRAM_SEG_NAME_SZ];
+		} nvram_process;
+		u8 payload[BMI_MAX_CMDBUF_SIZE];
+	};
+} __packed;
+
+union bmi_resp {
+	struct {
+		u8 payload[0];
+	} read_mem;
+	struct {
+		__le32 result;
+	} execute;
+	struct {
+		__le32 value;
+	} read_soc_reg;
+	struct {
+		__le32 len;
+		__le32 version;
+		__le32 type;
+	} get_target_info;
+	struct {
+		__le32 patch_id;
+	} rompatch_install;
+	struct {
+		__le32 patch_id;
+	} rompatch_uninstall;
+	struct {
+		/* 0 = nothing executed
+		 * otherwise = NVRAM segment return value */
+		__le32 result;
+	} nvram_process;
+	u8 payload[BMI_MAX_CMDBUF_SIZE];
+} __packed;
+
+struct bmi_target_info {
+	u32 version;
+	u32 type;
+};
+
+
+/* in msec */
+#define BMI_COMMUNICATION_TIMEOUT_HZ (1*HZ)
+
+#define BMI_CE_NUM_TO_TARG 0
+#define BMI_CE_NUM_TO_HOST 1
+
+int ath10k_bmi_done(struct ath10k *ar);
+int ath10k_bmi_get_target_info(struct ath10k *ar,
+			       struct bmi_target_info *target_info);
+int ath10k_bmi_read_memory(struct ath10k *ar, u32 address,
+			   void *buffer, u32 length);
+int ath10k_bmi_write_memory(struct ath10k *ar, u32 address,
+			    const void *buffer, u32 length);
+
+#define ath10k_bmi_read32(ar, item, val)				\
+	({								\
+		int ret;						\
+		u32 addr;						\
+		__le32 tmp;						\
+									\
+		addr = host_interest_item_address(HI_ITEM(item));	\
+		ret = ath10k_bmi_read_memory(ar, addr, (u8 *)&tmp, 4); \
+		*val = __le32_to_cpu(tmp);				\
+		ret;							\
+	 })
+
+#define ath10k_bmi_write32(ar, item, val)				\
+	({								\
+		int ret;						\
+		u32 address;						\
+		__le32 v = __cpu_to_le32(val);				\
+									\
+		address = host_interest_item_address(HI_ITEM(item));	\
+		ret = ath10k_bmi_write_memory(ar, address,		\
+					      (u8 *)&v, sizeof(v));	\
+		ret;							\
+	})
+
+int ath10k_bmi_execute(struct ath10k *ar, u32 address, u32 *param);
+int ath10k_bmi_lz_stream_start(struct ath10k *ar, u32 address);
+int ath10k_bmi_lz_data(struct ath10k *ar, const void *buffer, u32 length);
+int ath10k_bmi_fast_download(struct ath10k *ar, u32 address,
+			     const void *buffer, u32 length);
+#endif /* _BMI_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
new file mode 100644
index 000000000000..61a8ac70d3ca
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -0,0 +1,1189 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "hif.h"
+#include "pci.h"
+#include "ce.h"
+#include "debug.h"
+
+/*
+ * Support for Copy Engine hardware, which is mainly used for
+ * communication between Host and Target over a PCIe interconnect.
+ */
+
+/*
+ * A single CopyEngine (CE) comprises two "rings":
+ *   a source ring
+ *   a destination ring
+ *
+ * Each ring consists of a number of descriptors which specify
+ * an address, length, and meta-data.
+ *
+ * Typically, one side of the PCIe interconnect (Host or Target)
+ * controls one ring and the other side controls the other ring.
+ * The source side chooses when to initiate a transfer and it
+ * chooses what to send (buffer address, length). The destination
+ * side keeps a supply of "anonymous receive buffers" available and
+ * it handles incoming data as it arrives (when the destination
+ * recieves an interrupt).
+ *
+ * The sender may send a simple buffer (address/length) or it may
+ * send a small list of buffers.  When a small list is sent, hardware
+ * "gathers" these and they end up in a single destination buffer
+ * with a single interrupt.
+ *
+ * There are several "contexts" managed by this layer -- more, it
+ * may seem -- than should be needed. These are provided mainly for
+ * maximum flexibility and especially to facilitate a simpler HIF
+ * implementation. There are per-CopyEngine recv, send, and watermark
+ * contexts. These are supplied by the caller when a recv, send,
+ * or watermark handler is established and they are echoed back to
+ * the caller when the respective callbacks are invoked. There is
+ * also a per-transfer context supplied by the caller when a buffer
+ * (or sendlist) is sent and when a buffer is enqueued for recv.
+ * These per-transfer contexts are echoed back to the caller when
+ * the buffer is sent/received.
+ */
+
+static inline void ath10k_ce_dest_ring_write_index_set(struct ath10k *ar,
+						       u32 ce_ctrl_addr,
+						       unsigned int n)
+{
+	ath10k_pci_write32(ar, ce_ctrl_addr + DST_WR_INDEX_ADDRESS, n);
+}
+
+static inline u32 ath10k_ce_dest_ring_write_index_get(struct ath10k *ar,
+						      u32 ce_ctrl_addr)
+{
+	return ath10k_pci_read32(ar, ce_ctrl_addr + DST_WR_INDEX_ADDRESS);
+}
+
+static inline void ath10k_ce_src_ring_write_index_set(struct ath10k *ar,
+						      u32 ce_ctrl_addr,
+						      unsigned int n)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	void __iomem *indicator_addr;
+
+	if (!test_bit(ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND, ar_pci->features)) {
+		ath10k_pci_write32(ar, ce_ctrl_addr + SR_WR_INDEX_ADDRESS, n);
+		return;
+	}
+
+	/* workaround for QCA988x_1.0 HW CE */
+	indicator_addr = ar_pci->mem + ce_ctrl_addr + DST_WATERMARK_ADDRESS;
+
+	if (ce_ctrl_addr == ath10k_ce_base_address(CDC_WAR_DATA_CE)) {
+		iowrite32((CDC_WAR_MAGIC_STR | n), indicator_addr);
+	} else {
+		unsigned long irq_flags;
+		local_irq_save(irq_flags);
+		iowrite32(1, indicator_addr);
+
+		/*
+		 * PCIE write waits for ACK in IPQ8K, there is no
+		 * need to read back value.
+		 */
+		(void)ioread32(indicator_addr);
+		(void)ioread32(indicator_addr); /* conservative */
+
+		ath10k_pci_write32(ar, ce_ctrl_addr + SR_WR_INDEX_ADDRESS, n);
+
+		iowrite32(0, indicator_addr);
+		local_irq_restore(irq_flags);
+	}
+}
+
+static inline u32 ath10k_ce_src_ring_write_index_get(struct ath10k *ar,
+						     u32 ce_ctrl_addr)
+{
+	return ath10k_pci_read32(ar, ce_ctrl_addr + SR_WR_INDEX_ADDRESS);
+}
+
+static inline u32 ath10k_ce_src_ring_read_index_get(struct ath10k *ar,
+						    u32 ce_ctrl_addr)
+{
+	return ath10k_pci_read32(ar, ce_ctrl_addr + CURRENT_SRRI_ADDRESS);
+}
+
+static inline void ath10k_ce_src_ring_base_addr_set(struct ath10k *ar,
+						    u32 ce_ctrl_addr,
+						    unsigned int addr)
+{
+	ath10k_pci_write32(ar, ce_ctrl_addr + SR_BA_ADDRESS, addr);
+}
+
+static inline void ath10k_ce_src_ring_size_set(struct ath10k *ar,
+					       u32 ce_ctrl_addr,
+					       unsigned int n)
+{
+	ath10k_pci_write32(ar, ce_ctrl_addr + SR_SIZE_ADDRESS, n);
+}
+
+static inline void ath10k_ce_src_ring_dmax_set(struct ath10k *ar,
+					       u32 ce_ctrl_addr,
+					       unsigned int n)
+{
+	u32 ctrl1_addr = ath10k_pci_read32((ar),
+					   (ce_ctrl_addr) + CE_CTRL1_ADDRESS);
+
+	ath10k_pci_write32(ar, ce_ctrl_addr + CE_CTRL1_ADDRESS,
+			   (ctrl1_addr &  ~CE_CTRL1_DMAX_LENGTH_MASK) |
+			   CE_CTRL1_DMAX_LENGTH_SET(n));
+}
+
+static inline void ath10k_ce_src_ring_byte_swap_set(struct ath10k *ar,
+						    u32 ce_ctrl_addr,
+						    unsigned int n)
+{
+	u32 ctrl1_addr = ath10k_pci_read32(ar, ce_ctrl_addr + CE_CTRL1_ADDRESS);
+
+	ath10k_pci_write32(ar, ce_ctrl_addr + CE_CTRL1_ADDRESS,
+			   (ctrl1_addr & ~CE_CTRL1_SRC_RING_BYTE_SWAP_EN_MASK) |
+			   CE_CTRL1_SRC_RING_BYTE_SWAP_EN_SET(n));
+}
+
+static inline void ath10k_ce_dest_ring_byte_swap_set(struct ath10k *ar,
+						     u32 ce_ctrl_addr,
+						     unsigned int n)
+{
+	u32 ctrl1_addr = ath10k_pci_read32(ar, ce_ctrl_addr + CE_CTRL1_ADDRESS);
+
+	ath10k_pci_write32(ar, ce_ctrl_addr + CE_CTRL1_ADDRESS,
+			   (ctrl1_addr & ~CE_CTRL1_DST_RING_BYTE_SWAP_EN_MASK) |
+			   CE_CTRL1_DST_RING_BYTE_SWAP_EN_SET(n));
+}
+
+static inline u32 ath10k_ce_dest_ring_read_index_get(struct ath10k *ar,
+						     u32 ce_ctrl_addr)
+{
+	return ath10k_pci_read32(ar, ce_ctrl_addr + CURRENT_DRRI_ADDRESS);
+}
+
+static inline void ath10k_ce_dest_ring_base_addr_set(struct ath10k *ar,
+						     u32 ce_ctrl_addr,
+						     u32 addr)
+{
+	ath10k_pci_write32(ar, ce_ctrl_addr + DR_BA_ADDRESS, addr);
+}
+
+static inline void ath10k_ce_dest_ring_size_set(struct ath10k *ar,
+						u32 ce_ctrl_addr,
+						unsigned int n)
+{
+	ath10k_pci_write32(ar, ce_ctrl_addr + DR_SIZE_ADDRESS, n);
+}
+
+static inline void ath10k_ce_src_ring_highmark_set(struct ath10k *ar,
+						   u32 ce_ctrl_addr,
+						   unsigned int n)
+{
+	u32 addr = ath10k_pci_read32(ar, ce_ctrl_addr + SRC_WATERMARK_ADDRESS);
+
+	ath10k_pci_write32(ar, ce_ctrl_addr + SRC_WATERMARK_ADDRESS,
+			   (addr & ~SRC_WATERMARK_HIGH_MASK) |
+			   SRC_WATERMARK_HIGH_SET(n));
+}
+
+static inline void ath10k_ce_src_ring_lowmark_set(struct ath10k *ar,
+						  u32 ce_ctrl_addr,
+						  unsigned int n)
+{
+	u32 addr = ath10k_pci_read32(ar, ce_ctrl_addr + SRC_WATERMARK_ADDRESS);
+
+	ath10k_pci_write32(ar, ce_ctrl_addr + SRC_WATERMARK_ADDRESS,
+			   (addr & ~SRC_WATERMARK_LOW_MASK) |
+			   SRC_WATERMARK_LOW_SET(n));
+}
+
+static inline void ath10k_ce_dest_ring_highmark_set(struct ath10k *ar,
+						    u32 ce_ctrl_addr,
+						    unsigned int n)
+{
+	u32 addr = ath10k_pci_read32(ar, ce_ctrl_addr + DST_WATERMARK_ADDRESS);
+
+	ath10k_pci_write32(ar, ce_ctrl_addr + DST_WATERMARK_ADDRESS,
+			   (addr & ~DST_WATERMARK_HIGH_MASK) |
+			   DST_WATERMARK_HIGH_SET(n));
+}
+
+static inline void ath10k_ce_dest_ring_lowmark_set(struct ath10k *ar,
+						   u32 ce_ctrl_addr,
+						   unsigned int n)
+{
+	u32 addr = ath10k_pci_read32(ar, ce_ctrl_addr + DST_WATERMARK_ADDRESS);
+
+	ath10k_pci_write32(ar, ce_ctrl_addr + DST_WATERMARK_ADDRESS,
+			   (addr & ~DST_WATERMARK_LOW_MASK) |
+			   DST_WATERMARK_LOW_SET(n));
+}
+
+static inline void ath10k_ce_copy_complete_inter_enable(struct ath10k *ar,
+							u32 ce_ctrl_addr)
+{
+	u32 host_ie_addr = ath10k_pci_read32(ar,
+					     ce_ctrl_addr + HOST_IE_ADDRESS);
+
+	ath10k_pci_write32(ar, ce_ctrl_addr + HOST_IE_ADDRESS,
+			   host_ie_addr | HOST_IE_COPY_COMPLETE_MASK);
+}
+
+static inline void ath10k_ce_copy_complete_intr_disable(struct ath10k *ar,
+							u32 ce_ctrl_addr)
+{
+	u32 host_ie_addr = ath10k_pci_read32(ar,
+					     ce_ctrl_addr + HOST_IE_ADDRESS);
+
+	ath10k_pci_write32(ar, ce_ctrl_addr + HOST_IE_ADDRESS,
+			   host_ie_addr & ~HOST_IE_COPY_COMPLETE_MASK);
+}
+
+static inline void ath10k_ce_watermark_intr_disable(struct ath10k *ar,
+						    u32 ce_ctrl_addr)
+{
+	u32 host_ie_addr = ath10k_pci_read32(ar,
+					     ce_ctrl_addr + HOST_IE_ADDRESS);
+
+	ath10k_pci_write32(ar, ce_ctrl_addr + HOST_IE_ADDRESS,
+			   host_ie_addr & ~CE_WATERMARK_MASK);
+}
+
+static inline void ath10k_ce_error_intr_enable(struct ath10k *ar,
+					       u32 ce_ctrl_addr)
+{
+	u32 misc_ie_addr = ath10k_pci_read32(ar,
+					     ce_ctrl_addr + MISC_IE_ADDRESS);
+
+	ath10k_pci_write32(ar, ce_ctrl_addr + MISC_IE_ADDRESS,
+			   misc_ie_addr | CE_ERROR_MASK);
+}
+
+static inline void ath10k_ce_engine_int_status_clear(struct ath10k *ar,
+						     u32 ce_ctrl_addr,
+						     unsigned int mask)
+{
+	ath10k_pci_write32(ar, ce_ctrl_addr + HOST_IS_ADDRESS, mask);
+}
+
+
+/*
+ * Guts of ath10k_ce_send, used by both ath10k_ce_send and
+ * ath10k_ce_sendlist_send.
+ * The caller takes responsibility for any needed locking.
+ */
+static int ath10k_ce_send_nolock(struct ce_state *ce_state,
+				 void *per_transfer_context,
+				 u32 buffer,
+				 unsigned int nbytes,
+				 unsigned int transfer_id,
+				 unsigned int flags)
+{
+	struct ath10k *ar = ce_state->ar;
+	struct ce_ring_state *src_ring = ce_state->src_ring;
+	struct ce_desc *desc, *sdesc;
+	unsigned int nentries_mask = src_ring->nentries_mask;
+	unsigned int sw_index = src_ring->sw_index;
+	unsigned int write_index = src_ring->write_index;
+	u32 ctrl_addr = ce_state->ctrl_addr;
+	u32 desc_flags = 0;
+	int ret = 0;
+
+	if (nbytes > ce_state->src_sz_max)
+		ath10k_warn("%s: send more we can (nbytes: %d, max: %d)\n",
+			    __func__, nbytes, ce_state->src_sz_max);
+
+	ath10k_pci_wake(ar);
+
+	if (unlikely(CE_RING_DELTA(nentries_mask,
+				   write_index, sw_index - 1) <= 0)) {
+		ret = -EIO;
+		goto exit;
+	}
+
+	desc = CE_SRC_RING_TO_DESC(src_ring->base_addr_owner_space,
+				   write_index);
+	sdesc = CE_SRC_RING_TO_DESC(src_ring->shadow_base, write_index);
+
+	desc_flags |= SM(transfer_id, CE_DESC_FLAGS_META_DATA);
+
+	if (flags & CE_SEND_FLAG_GATHER)
+		desc_flags |= CE_DESC_FLAGS_GATHER;
+	if (flags & CE_SEND_FLAG_BYTE_SWAP)
+		desc_flags |= CE_DESC_FLAGS_BYTE_SWAP;
+
+	sdesc->addr   = __cpu_to_le32(buffer);
+	sdesc->nbytes = __cpu_to_le16(nbytes);
+	sdesc->flags  = __cpu_to_le16(desc_flags);
+
+	*desc = *sdesc;
+
+	src_ring->per_transfer_context[write_index] = per_transfer_context;
+
+	/* Update Source Ring Write Index */
+	write_index = CE_RING_IDX_INCR(nentries_mask, write_index);
+
+	/* WORKAROUND */
+	if (!(flags & CE_SEND_FLAG_GATHER))
+		ath10k_ce_src_ring_write_index_set(ar, ctrl_addr, write_index);
+
+	src_ring->write_index = write_index;
+exit:
+	ath10k_pci_sleep(ar);
+	return ret;
+}
+
+int ath10k_ce_send(struct ce_state *ce_state,
+		   void *per_transfer_context,
+		   u32 buffer,
+		   unsigned int nbytes,
+		   unsigned int transfer_id,
+		   unsigned int flags)
+{
+	struct ath10k *ar = ce_state->ar;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ret;
+
+	spin_lock_bh(&ar_pci->ce_lock);
+	ret = ath10k_ce_send_nolock(ce_state, per_transfer_context,
+				    buffer, nbytes, transfer_id, flags);
+	spin_unlock_bh(&ar_pci->ce_lock);
+
+	return ret;
+}
+
+void ath10k_ce_sendlist_buf_add(struct ce_sendlist *sendlist, u32 buffer,
+				unsigned int nbytes, u32 flags)
+{
+	unsigned int num_items = sendlist->num_items;
+	struct ce_sendlist_item *item;
+
+	item = &sendlist->item[num_items];
+	item->data = buffer;
+	item->u.nbytes = nbytes;
+	item->flags = flags;
+	sendlist->num_items++;
+}
+
+int ath10k_ce_sendlist_send(struct ce_state *ce_state,
+			    void *per_transfer_context,
+			    struct ce_sendlist *sendlist,
+			    unsigned int transfer_id)
+{
+	struct ce_ring_state *src_ring = ce_state->src_ring;
+	struct ce_sendlist_item *item;
+	struct ath10k *ar = ce_state->ar;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	unsigned int nentries_mask = src_ring->nentries_mask;
+	unsigned int num_items = sendlist->num_items;
+	unsigned int sw_index;
+	unsigned int write_index;
+	int i, delta, ret = -ENOMEM;
+
+	spin_lock_bh(&ar_pci->ce_lock);
+
+	sw_index = src_ring->sw_index;
+	write_index = src_ring->write_index;
+
+	delta = CE_RING_DELTA(nentries_mask, write_index, sw_index - 1);
+
+	if (delta >= num_items) {
+		/*
+		 * Handle all but the last item uniformly.
+		 */
+		for (i = 0; i < num_items - 1; i++) {
+			item = &sendlist->item[i];
+			ret = ath10k_ce_send_nolock(ce_state,
+						    CE_SENDLIST_ITEM_CTXT,
+						    (u32) item->data,
+						    item->u.nbytes, transfer_id,
+						    item->flags |
+						    CE_SEND_FLAG_GATHER);
+			if (ret)
+				ath10k_warn("CE send failed for item: %d\n", i);
+		}
+		/*
+		 * Provide valid context pointer for final item.
+		 */
+		item = &sendlist->item[i];
+		ret = ath10k_ce_send_nolock(ce_state, per_transfer_context,
+					    (u32) item->data, item->u.nbytes,
+					    transfer_id, item->flags);
+		if (ret)
+			ath10k_warn("CE send failed for last item: %d\n", i);
+	}
+
+	spin_unlock_bh(&ar_pci->ce_lock);
+
+	return ret;
+}
+
+int ath10k_ce_recv_buf_enqueue(struct ce_state *ce_state,
+			       void *per_recv_context,
+			       u32 buffer)
+{
+	struct ce_ring_state *dest_ring = ce_state->dest_ring;
+	u32 ctrl_addr = ce_state->ctrl_addr;
+	struct ath10k *ar = ce_state->ar;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	unsigned int nentries_mask = dest_ring->nentries_mask;
+	unsigned int write_index;
+	unsigned int sw_index;
+	int ret;
+
+	spin_lock_bh(&ar_pci->ce_lock);
+	write_index = dest_ring->write_index;
+	sw_index = dest_ring->sw_index;
+
+	ath10k_pci_wake(ar);
+
+	if (CE_RING_DELTA(nentries_mask, write_index, sw_index - 1) > 0) {
+		struct ce_desc *base = dest_ring->base_addr_owner_space;
+		struct ce_desc *desc = CE_DEST_RING_TO_DESC(base, write_index);
+
+		/* Update destination descriptor */
+		desc->addr    = __cpu_to_le32(buffer);
+		desc->nbytes = 0;
+
+		dest_ring->per_transfer_context[write_index] =
+							per_recv_context;
+
+		/* Update Destination Ring Write Index */
+		write_index = CE_RING_IDX_INCR(nentries_mask, write_index);
+		ath10k_ce_dest_ring_write_index_set(ar, ctrl_addr, write_index);
+		dest_ring->write_index = write_index;
+		ret = 0;
+	} else {
+		ret = -EIO;
+	}
+	ath10k_pci_sleep(ar);
+	spin_unlock_bh(&ar_pci->ce_lock);
+
+	return ret;
+}
+
+/*
+ * Guts of ath10k_ce_completed_recv_next.
+ * The caller takes responsibility for any necessary locking.
+ */
+static int ath10k_ce_completed_recv_next_nolock(struct ce_state *ce_state,
+						void **per_transfer_contextp,
+						u32 *bufferp,
+						unsigned int *nbytesp,
+						unsigned int *transfer_idp,
+						unsigned int *flagsp)
+{
+	struct ce_ring_state *dest_ring = ce_state->dest_ring;
+	unsigned int nentries_mask = dest_ring->nentries_mask;
+	unsigned int sw_index = dest_ring->sw_index;
+
+	struct ce_desc *base = dest_ring->base_addr_owner_space;
+	struct ce_desc *desc = CE_DEST_RING_TO_DESC(base, sw_index);
+	struct ce_desc sdesc;
+	u16 nbytes;
+
+	/* Copy in one go for performance reasons */
+	sdesc = *desc;
+
+	nbytes = __le16_to_cpu(sdesc.nbytes);
+	if (nbytes == 0) {
+		/*
+		 * This closes a relatively unusual race where the Host
+		 * sees the updated DRRI before the update to the
+		 * corresponding descriptor has completed. We treat this
+		 * as a descriptor that is not yet done.
+		 */
+		return -EIO;
+	}
+
+	desc->nbytes = 0;
+
+	/* Return data from completed destination descriptor */
+	*bufferp = __le32_to_cpu(sdesc.addr);
+	*nbytesp = nbytes;
+	*transfer_idp = MS(__le16_to_cpu(sdesc.flags), CE_DESC_FLAGS_META_DATA);
+
+	if (__le16_to_cpu(sdesc.flags) & CE_DESC_FLAGS_BYTE_SWAP)
+		*flagsp = CE_RECV_FLAG_SWAPPED;
+	else
+		*flagsp = 0;
+
+	if (per_transfer_contextp)
+		*per_transfer_contextp =
+			dest_ring->per_transfer_context[sw_index];
+
+	/* sanity */
+	dest_ring->per_transfer_context[sw_index] = NULL;
+
+	/* Update sw_index */
+	sw_index = CE_RING_IDX_INCR(nentries_mask, sw_index);
+	dest_ring->sw_index = sw_index;
+
+	return 0;
+}
+
+int ath10k_ce_completed_recv_next(struct ce_state *ce_state,
+				  void **per_transfer_contextp,
+				  u32 *bufferp,
+				  unsigned int *nbytesp,
+				  unsigned int *transfer_idp,
+				  unsigned int *flagsp)
+{
+	struct ath10k *ar = ce_state->ar;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ret;
+
+	spin_lock_bh(&ar_pci->ce_lock);
+	ret = ath10k_ce_completed_recv_next_nolock(ce_state,
+						   per_transfer_contextp,
+						   bufferp, nbytesp,
+						   transfer_idp, flagsp);
+	spin_unlock_bh(&ar_pci->ce_lock);
+
+	return ret;
+}
+
+int ath10k_ce_revoke_recv_next(struct ce_state *ce_state,
+			       void **per_transfer_contextp,
+			       u32 *bufferp)
+{
+	struct ce_ring_state *dest_ring;
+	unsigned int nentries_mask;
+	unsigned int sw_index;
+	unsigned int write_index;
+	int ret;
+	struct ath10k *ar;
+	struct ath10k_pci *ar_pci;
+
+	dest_ring = ce_state->dest_ring;
+
+	if (!dest_ring)
+		return -EIO;
+
+	ar = ce_state->ar;
+	ar_pci = ath10k_pci_priv(ar);
+
+	spin_lock_bh(&ar_pci->ce_lock);
+
+	nentries_mask = dest_ring->nentries_mask;
+	sw_index = dest_ring->sw_index;
+	write_index = dest_ring->write_index;
+	if (write_index != sw_index) {
+		struct ce_desc *base = dest_ring->base_addr_owner_space;
+		struct ce_desc *desc = CE_DEST_RING_TO_DESC(base, sw_index);
+
+		/* Return data from completed destination descriptor */
+		*bufferp = __le32_to_cpu(desc->addr);
+
+		if (per_transfer_contextp)
+			*per_transfer_contextp =
+				dest_ring->per_transfer_context[sw_index];
+
+		/* sanity */
+		dest_ring->per_transfer_context[sw_index] = NULL;
+
+		/* Update sw_index */
+		sw_index = CE_RING_IDX_INCR(nentries_mask, sw_index);
+		dest_ring->sw_index = sw_index;
+		ret = 0;
+	} else {
+		ret = -EIO;
+	}
+
+	spin_unlock_bh(&ar_pci->ce_lock);
+
+	return ret;
+}
+
+/*
+ * Guts of ath10k_ce_completed_send_next.
+ * The caller takes responsibility for any necessary locking.
+ */
+static int ath10k_ce_completed_send_next_nolock(struct ce_state *ce_state,
+						void **per_transfer_contextp,
+						u32 *bufferp,
+						unsigned int *nbytesp,
+						unsigned int *transfer_idp)
+{
+	struct ce_ring_state *src_ring = ce_state->src_ring;
+	u32 ctrl_addr = ce_state->ctrl_addr;
+	struct ath10k *ar = ce_state->ar;
+	unsigned int nentries_mask = src_ring->nentries_mask;
+	unsigned int sw_index = src_ring->sw_index;
+	unsigned int read_index;
+	int ret = -EIO;
+
+	if (src_ring->hw_index == sw_index) {
+		/*
+		 * The SW completion index has caught up with the cached
+		 * version of the HW completion index.
+		 * Update the cached HW completion index to see whether
+		 * the SW has really caught up to the HW, or if the cached
+		 * value of the HW index has become stale.
+		 */
+		ath10k_pci_wake(ar);
+		src_ring->hw_index =
+			ath10k_ce_src_ring_read_index_get(ar, ctrl_addr);
+		ath10k_pci_sleep(ar);
+	}
+	read_index = src_ring->hw_index;
+
+	if ((read_index != sw_index) && (read_index != 0xffffffff)) {
+		struct ce_desc *sbase = src_ring->shadow_base;
+		struct ce_desc *sdesc = CE_SRC_RING_TO_DESC(sbase, sw_index);
+
+		/* Return data from completed source descriptor */
+		*bufferp = __le32_to_cpu(sdesc->addr);
+		*nbytesp = __le16_to_cpu(sdesc->nbytes);
+		*transfer_idp = MS(__le16_to_cpu(sdesc->flags),
+						CE_DESC_FLAGS_META_DATA);
+
+		if (per_transfer_contextp)
+			*per_transfer_contextp =
+				src_ring->per_transfer_context[sw_index];
+
+		/* sanity */
+		src_ring->per_transfer_context[sw_index] = NULL;
+
+		/* Update sw_index */
+		sw_index = CE_RING_IDX_INCR(nentries_mask, sw_index);
+		src_ring->sw_index = sw_index;
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* NB: Modeled after ath10k_ce_completed_send_next */
+int ath10k_ce_cancel_send_next(struct ce_state *ce_state,
+			       void **per_transfer_contextp,
+			       u32 *bufferp,
+			       unsigned int *nbytesp,
+			       unsigned int *transfer_idp)
+{
+	struct ce_ring_state *src_ring;
+	unsigned int nentries_mask;
+	unsigned int sw_index;
+	unsigned int write_index;
+	int ret;
+	struct ath10k *ar;
+	struct ath10k_pci *ar_pci;
+
+	src_ring = ce_state->src_ring;
+
+	if (!src_ring)
+		return -EIO;
+
+	ar = ce_state->ar;
+	ar_pci = ath10k_pci_priv(ar);
+
+	spin_lock_bh(&ar_pci->ce_lock);
+
+	nentries_mask = src_ring->nentries_mask;
+	sw_index = src_ring->sw_index;
+	write_index = src_ring->write_index;
+
+	if (write_index != sw_index) {
+		struct ce_desc *base = src_ring->base_addr_owner_space;
+		struct ce_desc *desc = CE_SRC_RING_TO_DESC(base, sw_index);
+
+		/* Return data from completed source descriptor */
+		*bufferp = __le32_to_cpu(desc->addr);
+		*nbytesp = __le16_to_cpu(desc->nbytes);
+		*transfer_idp = MS(__le16_to_cpu(desc->flags),
+						CE_DESC_FLAGS_META_DATA);
+
+		if (per_transfer_contextp)
+			*per_transfer_contextp =
+				src_ring->per_transfer_context[sw_index];
+
+		/* sanity */
+		src_ring->per_transfer_context[sw_index] = NULL;
+
+		/* Update sw_index */
+		sw_index = CE_RING_IDX_INCR(nentries_mask, sw_index);
+		src_ring->sw_index = sw_index;
+		ret = 0;
+	} else {
+		ret = -EIO;
+	}
+
+	spin_unlock_bh(&ar_pci->ce_lock);
+
+	return ret;
+}
+
+int ath10k_ce_completed_send_next(struct ce_state *ce_state,
+				  void **per_transfer_contextp,
+				  u32 *bufferp,
+				  unsigned int *nbytesp,
+				  unsigned int *transfer_idp)
+{
+	struct ath10k *ar = ce_state->ar;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ret;
+
+	spin_lock_bh(&ar_pci->ce_lock);
+	ret = ath10k_ce_completed_send_next_nolock(ce_state,
+						   per_transfer_contextp,
+						   bufferp, nbytesp,
+						   transfer_idp);
+	spin_unlock_bh(&ar_pci->ce_lock);
+
+	return ret;
+}
+
+/*
+ * Guts of interrupt handler for per-engine interrupts on a particular CE.
+ *
+ * Invokes registered callbacks for recv_complete,
+ * send_complete, and watermarks.
+ */
+void ath10k_ce_per_engine_service(struct ath10k *ar, unsigned int ce_id)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct ce_state *ce_state = ar_pci->ce_id_to_state[ce_id];
+	u32 ctrl_addr = ce_state->ctrl_addr;
+	void *transfer_context;
+	u32 buf;
+	unsigned int nbytes;
+	unsigned int id;
+	unsigned int flags;
+
+	ath10k_pci_wake(ar);
+	spin_lock_bh(&ar_pci->ce_lock);
+
+	/* Clear the copy-complete interrupts that will be handled here. */
+	ath10k_ce_engine_int_status_clear(ar, ctrl_addr,
+					  HOST_IS_COPY_COMPLETE_MASK);
+
+	if (ce_state->recv_cb) {
+		/*
+		 * Pop completed recv buffers and call the registered
+		 * recv callback for each
+		 */
+		while (ath10k_ce_completed_recv_next_nolock(ce_state,
+							    &transfer_context,
+							    &buf, &nbytes,
+							    &id, &flags) == 0) {
+			spin_unlock_bh(&ar_pci->ce_lock);
+			ce_state->recv_cb(ce_state, transfer_context, buf,
+					  nbytes, id, flags);
+			spin_lock_bh(&ar_pci->ce_lock);
+		}
+	}
+
+	if (ce_state->send_cb) {
+		/*
+		 * Pop completed send buffers and call the registered
+		 * send callback for each
+		 */
+		while (ath10k_ce_completed_send_next_nolock(ce_state,
+							    &transfer_context,
+							    &buf,
+							    &nbytes,
+							    &id) == 0) {
+			spin_unlock_bh(&ar_pci->ce_lock);
+			ce_state->send_cb(ce_state, transfer_context,
+					  buf, nbytes, id);
+			spin_lock_bh(&ar_pci->ce_lock);
+		}
+	}
+
+	/*
+	 * Misc CE interrupts are not being handled, but still need
+	 * to be cleared.
+	 */
+	ath10k_ce_engine_int_status_clear(ar, ctrl_addr, CE_WATERMARK_MASK);
+
+	spin_unlock_bh(&ar_pci->ce_lock);
+	ath10k_pci_sleep(ar);
+}
+
+/*
+ * Handler for per-engine interrupts on ALL active CEs.
+ * This is used in cases where the system is sharing a
+ * single interrput for all CEs
+ */
+
+void ath10k_ce_per_engine_service_any(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ce_id;
+	u32 intr_summary;
+
+	ath10k_pci_wake(ar);
+	intr_summary = CE_INTERRUPT_SUMMARY(ar);
+
+	for (ce_id = 0; intr_summary && (ce_id < ar_pci->ce_count); ce_id++) {
+		if (intr_summary & (1 << ce_id))
+			intr_summary &= ~(1 << ce_id);
+		else
+			/* no intr pending on this CE */
+			continue;
+
+		ath10k_ce_per_engine_service(ar, ce_id);
+	}
+
+	ath10k_pci_sleep(ar);
+}
+
+/*
+ * Adjust interrupts for the copy complete handler.
+ * If it's needed for either send or recv, then unmask
+ * this interrupt; otherwise, mask it.
+ *
+ * Called with ce_lock held.
+ */
+static void ath10k_ce_per_engine_handler_adjust(struct ce_state *ce_state,
+						int disable_copy_compl_intr)
+{
+	u32 ctrl_addr = ce_state->ctrl_addr;
+	struct ath10k *ar = ce_state->ar;
+
+	ath10k_pci_wake(ar);
+
+	if ((!disable_copy_compl_intr) &&
+	    (ce_state->send_cb || ce_state->recv_cb))
+		ath10k_ce_copy_complete_inter_enable(ar, ctrl_addr);
+	else
+		ath10k_ce_copy_complete_intr_disable(ar, ctrl_addr);
+
+	ath10k_ce_watermark_intr_disable(ar, ctrl_addr);
+
+	ath10k_pci_sleep(ar);
+}
+
+void ath10k_ce_disable_interrupts(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ce_id;
+
+	ath10k_pci_wake(ar);
+	for (ce_id = 0; ce_id < ar_pci->ce_count; ce_id++) {
+		struct ce_state *ce_state = ar_pci->ce_id_to_state[ce_id];
+		u32 ctrl_addr = ce_state->ctrl_addr;
+
+		ath10k_ce_copy_complete_intr_disable(ar, ctrl_addr);
+	}
+	ath10k_pci_sleep(ar);
+}
+
+void ath10k_ce_send_cb_register(struct ce_state *ce_state,
+				void (*send_cb) (struct ce_state *ce_state,
+						 void *transfer_context,
+						 u32 buffer,
+						 unsigned int nbytes,
+						 unsigned int transfer_id),
+				int disable_interrupts)
+{
+	struct ath10k *ar = ce_state->ar;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	spin_lock_bh(&ar_pci->ce_lock);
+	ce_state->send_cb = send_cb;
+	ath10k_ce_per_engine_handler_adjust(ce_state, disable_interrupts);
+	spin_unlock_bh(&ar_pci->ce_lock);
+}
+
+void ath10k_ce_recv_cb_register(struct ce_state *ce_state,
+				void (*recv_cb) (struct ce_state *ce_state,
+						 void *transfer_context,
+						 u32 buffer,
+						 unsigned int nbytes,
+						 unsigned int transfer_id,
+						 unsigned int flags))
+{
+	struct ath10k *ar = ce_state->ar;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	spin_lock_bh(&ar_pci->ce_lock);
+	ce_state->recv_cb = recv_cb;
+	ath10k_ce_per_engine_handler_adjust(ce_state, 0);
+	spin_unlock_bh(&ar_pci->ce_lock);
+}
+
+static int ath10k_ce_init_src_ring(struct ath10k *ar,
+				   unsigned int ce_id,
+				   struct ce_state *ce_state,
+				   const struct ce_attr *attr)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct ce_ring_state *src_ring;
+	unsigned int nentries = attr->src_nentries;
+	unsigned int ce_nbytes;
+	u32 ctrl_addr = ath10k_ce_base_address(ce_id);
+	dma_addr_t base_addr;
+	char *ptr;
+
+	nentries = roundup_pow_of_two(nentries);
+
+	if (ce_state->src_ring) {
+		WARN_ON(ce_state->src_ring->nentries != nentries);
+		return 0;
+	}
+
+	ce_nbytes = sizeof(struct ce_ring_state) + (nentries * sizeof(void *));
+	ptr = kzalloc(ce_nbytes, GFP_KERNEL);
+	if (ptr == NULL)
+		return -ENOMEM;
+
+	ce_state->src_ring = (struct ce_ring_state *)ptr;
+	src_ring = ce_state->src_ring;
+
+	ptr += sizeof(struct ce_ring_state);
+	src_ring->nentries = nentries;
+	src_ring->nentries_mask = nentries - 1;
+
+	ath10k_pci_wake(ar);
+	src_ring->sw_index = ath10k_ce_src_ring_read_index_get(ar, ctrl_addr);
+	src_ring->hw_index = src_ring->sw_index;
+
+	src_ring->write_index =
+		ath10k_ce_src_ring_write_index_get(ar, ctrl_addr);
+	ath10k_pci_sleep(ar);
+
+	src_ring->per_transfer_context = (void **)ptr;
+
+	/*
+	 * Legacy platforms that do not support cache
+	 * coherent DMA are unsupported
+	 */
+	src_ring->base_addr_owner_space_unaligned =
+		pci_alloc_consistent(ar_pci->pdev,
+				     (nentries * sizeof(struct ce_desc) +
+				      CE_DESC_RING_ALIGN),
+				     &base_addr);
+	src_ring->base_addr_ce_space_unaligned = base_addr;
+
+	src_ring->base_addr_owner_space = PTR_ALIGN(
+			src_ring->base_addr_owner_space_unaligned,
+			CE_DESC_RING_ALIGN);
+	src_ring->base_addr_ce_space = ALIGN(
+			src_ring->base_addr_ce_space_unaligned,
+			CE_DESC_RING_ALIGN);
+
+	/*
+	 * Also allocate a shadow src ring in regular
+	 * mem to use for faster access.
+	 */
+	src_ring->shadow_base_unaligned =
+		kmalloc((nentries * sizeof(struct ce_desc) +
+			 CE_DESC_RING_ALIGN), GFP_KERNEL);
+
+	src_ring->shadow_base = PTR_ALIGN(
+			src_ring->shadow_base_unaligned,
+			CE_DESC_RING_ALIGN);
+
+	ath10k_pci_wake(ar);
+	ath10k_ce_src_ring_base_addr_set(ar, ctrl_addr,
+					 src_ring->base_addr_ce_space);
+	ath10k_ce_src_ring_size_set(ar, ctrl_addr, nentries);
+	ath10k_ce_src_ring_dmax_set(ar, ctrl_addr, attr->src_sz_max);
+	ath10k_ce_src_ring_byte_swap_set(ar, ctrl_addr, 0);
+	ath10k_ce_src_ring_lowmark_set(ar, ctrl_addr, 0);
+	ath10k_ce_src_ring_highmark_set(ar, ctrl_addr, nentries);
+	ath10k_pci_sleep(ar);
+
+	return 0;
+}
+
+static int ath10k_ce_init_dest_ring(struct ath10k *ar,
+				    unsigned int ce_id,
+				    struct ce_state *ce_state,
+				    const struct ce_attr *attr)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct ce_ring_state *dest_ring;
+	unsigned int nentries = attr->dest_nentries;
+	unsigned int ce_nbytes;
+	u32 ctrl_addr = ath10k_ce_base_address(ce_id);
+	dma_addr_t base_addr;
+	char *ptr;
+
+	nentries = roundup_pow_of_two(nentries);
+
+	if (ce_state->dest_ring) {
+		WARN_ON(ce_state->dest_ring->nentries != nentries);
+		return 0;
+	}
+
+	ce_nbytes = sizeof(struct ce_ring_state) + (nentries * sizeof(void *));
+	ptr = kzalloc(ce_nbytes, GFP_KERNEL);
+	if (ptr == NULL)
+		return -ENOMEM;
+
+	ce_state->dest_ring = (struct ce_ring_state *)ptr;
+	dest_ring = ce_state->dest_ring;
+
+	ptr += sizeof(struct ce_ring_state);
+	dest_ring->nentries = nentries;
+	dest_ring->nentries_mask = nentries - 1;
+
+	ath10k_pci_wake(ar);
+	dest_ring->sw_index = ath10k_ce_dest_ring_read_index_get(ar, ctrl_addr);
+	dest_ring->write_index =
+		ath10k_ce_dest_ring_write_index_get(ar, ctrl_addr);
+	ath10k_pci_sleep(ar);
+
+	dest_ring->per_transfer_context = (void **)ptr;
+
+	/*
+	 * Legacy platforms that do not support cache
+	 * coherent DMA are unsupported
+	 */
+	dest_ring->base_addr_owner_space_unaligned =
+		pci_alloc_consistent(ar_pci->pdev,
+				     (nentries * sizeof(struct ce_desc) +
+				      CE_DESC_RING_ALIGN),
+				     &base_addr);
+	dest_ring->base_addr_ce_space_unaligned = base_addr;
+
+	/*
+	 * Correctly initialize memory to 0 to prevent garbage
+	 * data crashing system when download firmware
+	 */
+	memset(dest_ring->base_addr_owner_space_unaligned, 0,
+	       nentries * sizeof(struct ce_desc) + CE_DESC_RING_ALIGN);
+
+	dest_ring->base_addr_owner_space = PTR_ALIGN(
+			dest_ring->base_addr_owner_space_unaligned,
+			CE_DESC_RING_ALIGN);
+	dest_ring->base_addr_ce_space = ALIGN(
+			dest_ring->base_addr_ce_space_unaligned,
+			CE_DESC_RING_ALIGN);
+
+	ath10k_pci_wake(ar);
+	ath10k_ce_dest_ring_base_addr_set(ar, ctrl_addr,
+					  dest_ring->base_addr_ce_space);
+	ath10k_ce_dest_ring_size_set(ar, ctrl_addr, nentries);
+	ath10k_ce_dest_ring_byte_swap_set(ar, ctrl_addr, 0);
+	ath10k_ce_dest_ring_lowmark_set(ar, ctrl_addr, 0);
+	ath10k_ce_dest_ring_highmark_set(ar, ctrl_addr, nentries);
+	ath10k_pci_sleep(ar);
+
+	return 0;
+}
+
+static struct ce_state *ath10k_ce_init_state(struct ath10k *ar,
+					     unsigned int ce_id,
+					     const struct ce_attr *attr)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct ce_state *ce_state = NULL;
+	u32 ctrl_addr = ath10k_ce_base_address(ce_id);
+
+	spin_lock_bh(&ar_pci->ce_lock);
+
+	if (!ar_pci->ce_id_to_state[ce_id]) {
+		ce_state = kzalloc(sizeof(*ce_state), GFP_ATOMIC);
+		if (ce_state == NULL) {
+			spin_unlock_bh(&ar_pci->ce_lock);
+			return NULL;
+		}
+
+		ar_pci->ce_id_to_state[ce_id] = ce_state;
+		ce_state->ar = ar;
+		ce_state->id = ce_id;
+		ce_state->ctrl_addr = ctrl_addr;
+		ce_state->state = CE_RUNNING;
+		/* Save attribute flags */
+		ce_state->attr_flags = attr->flags;
+		ce_state->src_sz_max = attr->src_sz_max;
+	}
+
+	spin_unlock_bh(&ar_pci->ce_lock);
+
+	return ce_state;
+}
+
+/*
+ * Initialize a Copy Engine based on caller-supplied attributes.
+ * This may be called once to initialize both source and destination
+ * rings or it may be called twice for separate source and destination
+ * initialization. It may be that only one side or the other is
+ * initialized by software/firmware.
+ */
+struct ce_state *ath10k_ce_init(struct ath10k *ar,
+				unsigned int ce_id,
+				const struct ce_attr *attr)
+{
+	struct ce_state *ce_state;
+	u32 ctrl_addr = ath10k_ce_base_address(ce_id);
+
+	ce_state = ath10k_ce_init_state(ar, ce_id, attr);
+	if (!ce_state) {
+		ath10k_err("Failed to initialize CE state for ID: %d\n", ce_id);
+		return NULL;
+	}
+
+	if (attr->src_nentries) {
+		if (ath10k_ce_init_src_ring(ar, ce_id, ce_state, attr)) {
+			ath10k_err("Failed to initialize CE src ring for ID: %d\n",
+				   ce_id);
+			ath10k_ce_deinit(ce_state);
+			return NULL;
+		}
+	}
+
+	if (attr->dest_nentries) {
+		if (ath10k_ce_init_dest_ring(ar, ce_id, ce_state, attr)) {
+			ath10k_err("Failed to initialize CE dest ring for ID: %d\n",
+				   ce_id);
+			ath10k_ce_deinit(ce_state);
+			return NULL;
+		}
+	}
+
+	/* Enable CE error interrupts */
+	ath10k_pci_wake(ar);
+	ath10k_ce_error_intr_enable(ar, ctrl_addr);
+	ath10k_pci_sleep(ar);
+
+	return ce_state;
+}
+
+void ath10k_ce_deinit(struct ce_state *ce_state)
+{
+	unsigned int ce_id = ce_state->id;
+	struct ath10k *ar = ce_state->ar;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	ce_state->state = CE_UNUSED;
+	ar_pci->ce_id_to_state[ce_id] = NULL;
+
+	if (ce_state->src_ring) {
+		kfree(ce_state->src_ring->shadow_base_unaligned);
+		pci_free_consistent(ar_pci->pdev,
+				    (ce_state->src_ring->nentries *
+				     sizeof(struct ce_desc) +
+				     CE_DESC_RING_ALIGN),
+				    ce_state->src_ring->base_addr_owner_space,
+				    ce_state->src_ring->base_addr_ce_space);
+		kfree(ce_state->src_ring);
+	}
+
+	if (ce_state->dest_ring) {
+		pci_free_consistent(ar_pci->pdev,
+				    (ce_state->dest_ring->nentries *
+				     sizeof(struct ce_desc) +
+				     CE_DESC_RING_ALIGN),
+				    ce_state->dest_ring->base_addr_owner_space,
+				    ce_state->dest_ring->base_addr_ce_space);
+		kfree(ce_state->dest_ring);
+	}
+	kfree(ce_state);
+}
diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
new file mode 100644
index 000000000000..c17f07c026f4
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -0,0 +1,516 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _CE_H_
+#define _CE_H_
+
+#include "hif.h"
+
+
+/* Maximum number of Copy Engine's supported */
+#define CE_COUNT_MAX 8
+#define CE_HTT_H2T_MSG_SRC_NENTRIES 2048
+
+/* Descriptor rings must be aligned to this boundary */
+#define CE_DESC_RING_ALIGN	8
+#define CE_SENDLIST_ITEMS_MAX	12
+#define CE_SEND_FLAG_GATHER	0x00010000
+
+/*
+ * Copy Engine support: low-level Target-side Copy Engine API.
+ * This is a hardware access layer used by code that understands
+ * how to use copy engines.
+ */
+
+struct ce_state;
+
+
+/* Copy Engine operational state */
+enum ce_op_state {
+	CE_UNUSED,
+	CE_PAUSED,
+	CE_RUNNING,
+};
+
+#define CE_DESC_FLAGS_GATHER         (1 << 0)
+#define CE_DESC_FLAGS_BYTE_SWAP      (1 << 1)
+#define CE_DESC_FLAGS_META_DATA_MASK 0xFFFC
+#define CE_DESC_FLAGS_META_DATA_LSB  3
+
+struct ce_desc {
+	__le32 addr;
+	__le16 nbytes;
+	__le16 flags; /* %CE_DESC_FLAGS_ */
+};
+
+/* Copy Engine Ring internal state */
+struct ce_ring_state {
+	/* Number of entries in this ring; must be power of 2 */
+	unsigned int nentries;
+	unsigned int nentries_mask;
+
+	/*
+	 * For dest ring, this is the next index to be processed
+	 * by software after it was/is received into.
+	 *
+	 * For src ring, this is the last descriptor that was sent
+	 * and completion processed by software.
+	 *
+	 * Regardless of src or dest ring, this is an invariant
+	 * (modulo ring size):
+	 *     write index >= read index >= sw_index
+	 */
+	unsigned int sw_index;
+	/* cached copy */
+	unsigned int write_index;
+	/*
+	 * For src ring, this is the next index not yet processed by HW.
+	 * This is a cached copy of the real HW index (read index), used
+	 * for avoiding reading the HW index register more often than
+	 * necessary.
+	 * This extends the invariant:
+	 *     write index >= read index >= hw_index >= sw_index
+	 *
+	 * For dest ring, this is currently unused.
+	 */
+	/* cached copy */
+	unsigned int hw_index;
+
+	/* Start of DMA-coherent area reserved for descriptors */
+	/* Host address space */
+	void *base_addr_owner_space_unaligned;
+	/* CE address space */
+	u32 base_addr_ce_space_unaligned;
+
+	/*
+	 * Actual start of descriptors.
+	 * Aligned to descriptor-size boundary.
+	 * Points into reserved DMA-coherent area, above.
+	 */
+	/* Host address space */
+	void *base_addr_owner_space;
+
+	/* CE address space */
+	u32 base_addr_ce_space;
+	/*
+	 * Start of shadow copy of descriptors, within regular memory.
+	 * Aligned to descriptor-size boundary.
+	 */
+	void *shadow_base_unaligned;
+	struct ce_desc *shadow_base;
+
+	void **per_transfer_context;
+};
+
+/* Copy Engine internal state */
+struct ce_state {
+	struct ath10k *ar;
+	unsigned int id;
+
+	unsigned int attr_flags;
+
+	u32 ctrl_addr;
+	enum ce_op_state state;
+
+	void (*send_cb) (struct ce_state *ce_state,
+			 void *per_transfer_send_context,
+			 u32 buffer,
+			 unsigned int nbytes,
+			 unsigned int transfer_id);
+	void (*recv_cb) (struct ce_state *ce_state,
+			 void *per_transfer_recv_context,
+			 u32 buffer,
+			 unsigned int nbytes,
+			 unsigned int transfer_id,
+			 unsigned int flags);
+
+	unsigned int src_sz_max;
+	struct ce_ring_state *src_ring;
+	struct ce_ring_state *dest_ring;
+};
+
+struct ce_sendlist_item {
+	/* e.g. buffer or desc list */
+	dma_addr_t data;
+	union {
+		/* simple buffer */
+		unsigned int nbytes;
+		/* Rx descriptor list */
+		unsigned int ndesc;
+	} u;
+	/* externally-specified flags; OR-ed with internal flags */
+	u32 flags;
+};
+
+struct ce_sendlist {
+	unsigned int num_items;
+	struct ce_sendlist_item item[CE_SENDLIST_ITEMS_MAX];
+};
+
+/* Copy Engine settable attributes */
+struct ce_attr;
+
+/*==================Send====================*/
+
+/* ath10k_ce_send flags */
+#define CE_SEND_FLAG_BYTE_SWAP 1
+
+/*
+ * Queue a source buffer to be sent to an anonymous destination buffer.
+ *   ce         - which copy engine to use
+ *   buffer          - address of buffer
+ *   nbytes          - number of bytes to send
+ *   transfer_id     - arbitrary ID; reflected to destination
+ *   flags           - CE_SEND_FLAG_* values
+ * Returns 0 on success; otherwise an error status.
+ *
+ * Note: If no flags are specified, use CE's default data swap mode.
+ *
+ * Implementation note: pushes 1 buffer to Source ring
+ */
+int ath10k_ce_send(struct ce_state *ce_state,
+		   void *per_transfer_send_context,
+		   u32 buffer,
+		   unsigned int nbytes,
+		   /* 14 bits */
+		   unsigned int transfer_id,
+		   unsigned int flags);
+
+void ath10k_ce_send_cb_register(struct ce_state *ce_state,
+				void (*send_cb) (struct ce_state *ce_state,
+						 void *transfer_context,
+						 u32 buffer,
+						 unsigned int nbytes,
+						 unsigned int transfer_id),
+				int disable_interrupts);
+
+/* Append a simple buffer (address/length) to a sendlist. */
+void ath10k_ce_sendlist_buf_add(struct ce_sendlist *sendlist,
+				u32 buffer,
+				unsigned int nbytes,
+				/* OR-ed with internal flags */
+				u32 flags);
+
+/*
+ * Queue a "sendlist" of buffers to be sent using gather to a single
+ * anonymous destination buffer
+ *   ce         - which copy engine to use
+ *   sendlist        - list of simple buffers to send using gather
+ *   transfer_id     - arbitrary ID; reflected to destination
+ * Returns 0 on success; otherwise an error status.
+ *
+ * Implemenation note: Pushes multiple buffers with Gather to Source ring.
+ */
+int ath10k_ce_sendlist_send(struct ce_state *ce_state,
+			    void *per_transfer_send_context,
+			    struct ce_sendlist *sendlist,
+			    /* 14 bits */
+			    unsigned int transfer_id);
+
+/*==================Recv=======================*/
+
+/*
+ * Make a buffer available to receive. The buffer must be at least of a
+ * minimal size appropriate for this copy engine (src_sz_max attribute).
+ *   ce                    - which copy engine to use
+ *   per_transfer_recv_context  - context passed back to caller's recv_cb
+ *   buffer                     - address of buffer in CE space
+ * Returns 0 on success; otherwise an error status.
+ *
+ * Implemenation note: Pushes a buffer to Dest ring.
+ */
+int ath10k_ce_recv_buf_enqueue(struct ce_state *ce_state,
+			       void *per_transfer_recv_context,
+			       u32 buffer);
+
+void ath10k_ce_recv_cb_register(struct ce_state *ce_state,
+				void (*recv_cb) (struct ce_state *ce_state,
+						 void *transfer_context,
+						 u32 buffer,
+						 unsigned int nbytes,
+						 unsigned int transfer_id,
+						 unsigned int flags));
+
+/* recv flags */
+/* Data is byte-swapped */
+#define CE_RECV_FLAG_SWAPPED	1
+
+/*
+ * Supply data for the next completed unprocessed receive descriptor.
+ * Pops buffer from Dest ring.
+ */
+int ath10k_ce_completed_recv_next(struct ce_state *ce_state,
+				  void **per_transfer_contextp,
+				  u32 *bufferp,
+				  unsigned int *nbytesp,
+				  unsigned int *transfer_idp,
+				  unsigned int *flagsp);
+/*
+ * Supply data for the next completed unprocessed send descriptor.
+ * Pops 1 completed send buffer from Source ring.
+ */
+int ath10k_ce_completed_send_next(struct ce_state *ce_state,
+			   void **per_transfer_contextp,
+			   u32 *bufferp,
+			   unsigned int *nbytesp,
+			   unsigned int *transfer_idp);
+
+/*==================CE Engine Initialization=======================*/
+
+/* Initialize an instance of a CE */
+struct ce_state *ath10k_ce_init(struct ath10k *ar,
+				unsigned int ce_id,
+				const struct ce_attr *attr);
+
+/*==================CE Engine Shutdown=======================*/
+/*
+ * Support clean shutdown by allowing the caller to revoke
+ * receive buffers.  Target DMA must be stopped before using
+ * this API.
+ */
+int ath10k_ce_revoke_recv_next(struct ce_state *ce_state,
+			       void **per_transfer_contextp,
+			       u32 *bufferp);
+
+/*
+ * Support clean shutdown by allowing the caller to cancel
+ * pending sends.  Target DMA must be stopped before using
+ * this API.
+ */
+int ath10k_ce_cancel_send_next(struct ce_state *ce_state,
+			       void **per_transfer_contextp,
+			       u32 *bufferp,
+			       unsigned int *nbytesp,
+			       unsigned int *transfer_idp);
+
+void ath10k_ce_deinit(struct ce_state *ce_state);
+
+/*==================CE Interrupt Handlers====================*/
+void ath10k_ce_per_engine_service_any(struct ath10k *ar);
+void ath10k_ce_per_engine_service(struct ath10k *ar, unsigned int ce_id);
+void ath10k_ce_disable_interrupts(struct ath10k *ar);
+
+/* ce_attr.flags values */
+/* Use NonSnooping PCIe accesses? */
+#define CE_ATTR_NO_SNOOP		1
+
+/* Byte swap data words */
+#define CE_ATTR_BYTE_SWAP_DATA		2
+
+/* Swizzle descriptors? */
+#define CE_ATTR_SWIZZLE_DESCRIPTORS	4
+
+/* no interrupt on copy completion */
+#define CE_ATTR_DIS_INTR		8
+
+/* Attributes of an instance of a Copy Engine */
+struct ce_attr {
+	/* CE_ATTR_* values */
+	unsigned int flags;
+
+	/* currently not in use */
+	unsigned int priority;
+
+	/* #entries in source ring - Must be a power of 2 */
+	unsigned int src_nentries;
+
+	/*
+	 * Max source send size for this CE.
+	 * This is also the minimum size of a destination buffer.
+	 */
+	unsigned int src_sz_max;
+
+	/* #entries in destination ring - Must be a power of 2 */
+	unsigned int dest_nentries;
+
+	/* Future use */
+	void *reserved;
+};
+
+/*
+ * When using sendlist_send to transfer multiple buffer fragments, the
+ * transfer context of each fragment, except last one, will be filled
+ * with CE_SENDLIST_ITEM_CTXT. ce_completed_send will return success for
+ * each fragment done with send and the transfer context would be
+ * CE_SENDLIST_ITEM_CTXT. Upper layer could use this to identify the
+ * status of a send completion.
+ */
+#define CE_SENDLIST_ITEM_CTXT	((void *)0xcecebeef)
+
+#define SR_BA_ADDRESS		0x0000
+#define SR_SIZE_ADDRESS		0x0004
+#define DR_BA_ADDRESS		0x0008
+#define DR_SIZE_ADDRESS		0x000c
+#define CE_CMD_ADDRESS		0x0018
+
+#define CE_CTRL1_DST_RING_BYTE_SWAP_EN_MSB	17
+#define CE_CTRL1_DST_RING_BYTE_SWAP_EN_LSB	17
+#define CE_CTRL1_DST_RING_BYTE_SWAP_EN_MASK	0x00020000
+#define CE_CTRL1_DST_RING_BYTE_SWAP_EN_SET(x) \
+	(((0 | (x)) << CE_CTRL1_DST_RING_BYTE_SWAP_EN_LSB) & \
+	CE_CTRL1_DST_RING_BYTE_SWAP_EN_MASK)
+
+#define CE_CTRL1_SRC_RING_BYTE_SWAP_EN_MSB	16
+#define CE_CTRL1_SRC_RING_BYTE_SWAP_EN_LSB	16
+#define CE_CTRL1_SRC_RING_BYTE_SWAP_EN_MASK	0x00010000
+#define CE_CTRL1_SRC_RING_BYTE_SWAP_EN_GET(x) \
+	(((x) & CE_CTRL1_SRC_RING_BYTE_SWAP_EN_MASK) >> \
+	 CE_CTRL1_SRC_RING_BYTE_SWAP_EN_LSB)
+#define CE_CTRL1_SRC_RING_BYTE_SWAP_EN_SET(x) \
+	(((0 | (x)) << CE_CTRL1_SRC_RING_BYTE_SWAP_EN_LSB) & \
+	 CE_CTRL1_SRC_RING_BYTE_SWAP_EN_MASK)
+
+#define CE_CTRL1_DMAX_LENGTH_MSB		15
+#define CE_CTRL1_DMAX_LENGTH_LSB		0
+#define CE_CTRL1_DMAX_LENGTH_MASK		0x0000ffff
+#define CE_CTRL1_DMAX_LENGTH_GET(x) \
+	(((x) & CE_CTRL1_DMAX_LENGTH_MASK) >> CE_CTRL1_DMAX_LENGTH_LSB)
+#define CE_CTRL1_DMAX_LENGTH_SET(x) \
+	(((0 | (x)) << CE_CTRL1_DMAX_LENGTH_LSB) & CE_CTRL1_DMAX_LENGTH_MASK)
+
+#define CE_CTRL1_ADDRESS			0x0010
+#define CE_CTRL1_HW_MASK			0x0007ffff
+#define CE_CTRL1_SW_MASK			0x0007ffff
+#define CE_CTRL1_HW_WRITE_MASK			0x00000000
+#define CE_CTRL1_SW_WRITE_MASK			0x0007ffff
+#define CE_CTRL1_RSTMASK			0xffffffff
+#define CE_CTRL1_RESET				0x00000080
+
+#define CE_CMD_HALT_STATUS_MSB			3
+#define CE_CMD_HALT_STATUS_LSB			3
+#define CE_CMD_HALT_STATUS_MASK			0x00000008
+#define CE_CMD_HALT_STATUS_GET(x) \
+	(((x) & CE_CMD_HALT_STATUS_MASK) >> CE_CMD_HALT_STATUS_LSB)
+#define CE_CMD_HALT_STATUS_SET(x) \
+	(((0 | (x)) << CE_CMD_HALT_STATUS_LSB) & CE_CMD_HALT_STATUS_MASK)
+#define CE_CMD_HALT_STATUS_RESET		0
+#define CE_CMD_HALT_MSB				0
+#define CE_CMD_HALT_MASK			0x00000001
+
+#define HOST_IE_COPY_COMPLETE_MSB		0
+#define HOST_IE_COPY_COMPLETE_LSB		0
+#define HOST_IE_COPY_COMPLETE_MASK		0x00000001
+#define HOST_IE_COPY_COMPLETE_GET(x) \
+	(((x) & HOST_IE_COPY_COMPLETE_MASK) >> HOST_IE_COPY_COMPLETE_LSB)
+#define HOST_IE_COPY_COMPLETE_SET(x) \
+	(((0 | (x)) << HOST_IE_COPY_COMPLETE_LSB) & HOST_IE_COPY_COMPLETE_MASK)
+#define HOST_IE_COPY_COMPLETE_RESET		0
+#define HOST_IE_ADDRESS				0x002c
+
+#define HOST_IS_DST_RING_LOW_WATERMARK_MASK	0x00000010
+#define HOST_IS_DST_RING_HIGH_WATERMARK_MASK	0x00000008
+#define HOST_IS_SRC_RING_LOW_WATERMARK_MASK	0x00000004
+#define HOST_IS_SRC_RING_HIGH_WATERMARK_MASK	0x00000002
+#define HOST_IS_COPY_COMPLETE_MASK		0x00000001
+#define HOST_IS_ADDRESS				0x0030
+
+#define MISC_IE_ADDRESS				0x0034
+
+#define MISC_IS_AXI_ERR_MASK			0x00000400
+
+#define MISC_IS_DST_ADDR_ERR_MASK		0x00000200
+#define MISC_IS_SRC_LEN_ERR_MASK		0x00000100
+#define MISC_IS_DST_MAX_LEN_VIO_MASK		0x00000080
+#define MISC_IS_DST_RING_OVERFLOW_MASK		0x00000040
+#define MISC_IS_SRC_RING_OVERFLOW_MASK		0x00000020
+
+#define MISC_IS_ADDRESS				0x0038
+
+#define SR_WR_INDEX_ADDRESS			0x003c
+
+#define DST_WR_INDEX_ADDRESS			0x0040
+
+#define CURRENT_SRRI_ADDRESS			0x0044
+
+#define CURRENT_DRRI_ADDRESS			0x0048
+
+#define SRC_WATERMARK_LOW_MSB			31
+#define SRC_WATERMARK_LOW_LSB			16
+#define SRC_WATERMARK_LOW_MASK			0xffff0000
+#define SRC_WATERMARK_LOW_GET(x) \
+	(((x) & SRC_WATERMARK_LOW_MASK) >> SRC_WATERMARK_LOW_LSB)
+#define SRC_WATERMARK_LOW_SET(x) \
+	(((0 | (x)) << SRC_WATERMARK_LOW_LSB) & SRC_WATERMARK_LOW_MASK)
+#define SRC_WATERMARK_LOW_RESET			0
+#define SRC_WATERMARK_HIGH_MSB			15
+#define SRC_WATERMARK_HIGH_LSB			0
+#define SRC_WATERMARK_HIGH_MASK			0x0000ffff
+#define SRC_WATERMARK_HIGH_GET(x) \
+	(((x) & SRC_WATERMARK_HIGH_MASK) >> SRC_WATERMARK_HIGH_LSB)
+#define SRC_WATERMARK_HIGH_SET(x) \
+	(((0 | (x)) << SRC_WATERMARK_HIGH_LSB) & SRC_WATERMARK_HIGH_MASK)
+#define SRC_WATERMARK_HIGH_RESET		0
+#define SRC_WATERMARK_ADDRESS			0x004c
+
+#define DST_WATERMARK_LOW_LSB			16
+#define DST_WATERMARK_LOW_MASK			0xffff0000
+#define DST_WATERMARK_LOW_SET(x) \
+	(((0 | (x)) << DST_WATERMARK_LOW_LSB) & DST_WATERMARK_LOW_MASK)
+#define DST_WATERMARK_LOW_RESET			0
+#define DST_WATERMARK_HIGH_MSB			15
+#define DST_WATERMARK_HIGH_LSB			0
+#define DST_WATERMARK_HIGH_MASK			0x0000ffff
+#define DST_WATERMARK_HIGH_GET(x) \
+	(((x) & DST_WATERMARK_HIGH_MASK) >> DST_WATERMARK_HIGH_LSB)
+#define DST_WATERMARK_HIGH_SET(x) \
+	(((0 | (x)) << DST_WATERMARK_HIGH_LSB) & DST_WATERMARK_HIGH_MASK)
+#define DST_WATERMARK_HIGH_RESET		0
+#define DST_WATERMARK_ADDRESS			0x0050
+
+
+static inline u32 ath10k_ce_base_address(unsigned int ce_id)
+{
+	return CE0_BASE_ADDRESS + (CE1_BASE_ADDRESS - CE0_BASE_ADDRESS) * ce_id;
+}
+
+#define CE_WATERMARK_MASK (HOST_IS_SRC_RING_LOW_WATERMARK_MASK  | \
+			   HOST_IS_SRC_RING_HIGH_WATERMARK_MASK | \
+			   HOST_IS_DST_RING_LOW_WATERMARK_MASK  | \
+			   HOST_IS_DST_RING_HIGH_WATERMARK_MASK)
+
+#define CE_ERROR_MASK	(MISC_IS_AXI_ERR_MASK           | \
+			 MISC_IS_DST_ADDR_ERR_MASK      | \
+			 MISC_IS_SRC_LEN_ERR_MASK       | \
+			 MISC_IS_DST_MAX_LEN_VIO_MASK   | \
+			 MISC_IS_DST_RING_OVERFLOW_MASK | \
+			 MISC_IS_SRC_RING_OVERFLOW_MASK)
+
+#define CE_SRC_RING_TO_DESC(baddr, idx) \
+	(&(((struct ce_desc *)baddr)[idx]))
+
+#define CE_DEST_RING_TO_DESC(baddr, idx) \
+	(&(((struct ce_desc *)baddr)[idx]))
+
+/* Ring arithmetic (modulus number of entries in ring, which is a pwr of 2). */
+#define CE_RING_DELTA(nentries_mask, fromidx, toidx) \
+	(((int)(toidx)-(int)(fromidx)) & (nentries_mask))
+
+#define CE_RING_IDX_INCR(nentries_mask, idx) (((idx) + 1) & (nentries_mask))
+
+#define CE_WRAPPER_INTERRUPT_SUMMARY_HOST_MSI_LSB		8
+#define CE_WRAPPER_INTERRUPT_SUMMARY_HOST_MSI_MASK		0x0000ff00
+#define CE_WRAPPER_INTERRUPT_SUMMARY_HOST_MSI_GET(x) \
+	(((x) & CE_WRAPPER_INTERRUPT_SUMMARY_HOST_MSI_MASK) >> \
+		CE_WRAPPER_INTERRUPT_SUMMARY_HOST_MSI_LSB)
+#define CE_WRAPPER_INTERRUPT_SUMMARY_ADDRESS			0x0000
+
+#define CE_INTERRUPT_SUMMARY(ar) \
+	CE_WRAPPER_INTERRUPT_SUMMARY_HOST_MSI_GET( \
+		ath10k_pci_read32((ar), CE_WRAPPER_BASE_ADDRESS + \
+		CE_WRAPPER_INTERRUPT_SUMMARY_ADDRESS))
+
+#endif /* _CE_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
new file mode 100644
index 000000000000..2b3426b1ff3f
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -0,0 +1,665 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/firmware.h>
+
+#include "core.h"
+#include "mac.h"
+#include "htc.h"
+#include "hif.h"
+#include "wmi.h"
+#include "bmi.h"
+#include "debug.h"
+#include "htt.h"
+
+unsigned int ath10k_debug_mask;
+static bool uart_print;
+static unsigned int ath10k_p2p;
+module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
+module_param(uart_print, bool, 0644);
+module_param_named(p2p, ath10k_p2p, uint, 0644);
+MODULE_PARM_DESC(debug_mask, "Debugging mask");
+MODULE_PARM_DESC(uart_print, "Uart target debugging");
+MODULE_PARM_DESC(p2p, "Enable ath10k P2P support");
+
+static const struct ath10k_hw_params ath10k_hw_params_list[] = {
+	{
+		.id = QCA988X_HW_1_0_VERSION,
+		.name = "qca988x hw1.0",
+		.patch_load_addr = QCA988X_HW_1_0_PATCH_LOAD_ADDR,
+		.fw = {
+			.dir = QCA988X_HW_1_0_FW_DIR,
+			.fw = QCA988X_HW_1_0_FW_FILE,
+			.otp = QCA988X_HW_1_0_OTP_FILE,
+			.board = QCA988X_HW_1_0_BOARD_DATA_FILE,
+		},
+	},
+	{
+		.id = QCA988X_HW_2_0_VERSION,
+		.name = "qca988x hw2.0",
+		.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
+		.fw = {
+			.dir = QCA988X_HW_2_0_FW_DIR,
+			.fw = QCA988X_HW_2_0_FW_FILE,
+			.otp = QCA988X_HW_2_0_OTP_FILE,
+			.board = QCA988X_HW_2_0_BOARD_DATA_FILE,
+		},
+	},
+};
+
+static void ath10k_send_suspend_complete(struct ath10k *ar)
+{
+	ath10k_dbg(ATH10K_DBG_CORE, "%s\n", __func__);
+
+	ar->is_target_paused = true;
+	wake_up(&ar->event_queue);
+}
+
+static int ath10k_check_fw_version(struct ath10k *ar)
+{
+	char version[32];
+
+	if (ar->fw_version_major >= SUPPORTED_FW_MAJOR &&
+	    ar->fw_version_minor >= SUPPORTED_FW_MINOR &&
+	    ar->fw_version_release >= SUPPORTED_FW_RELEASE &&
+	    ar->fw_version_build >= SUPPORTED_FW_BUILD)
+		return 0;
+
+	snprintf(version, sizeof(version), "%u.%u.%u.%u",
+		 SUPPORTED_FW_MAJOR, SUPPORTED_FW_MINOR,
+		 SUPPORTED_FW_RELEASE, SUPPORTED_FW_BUILD);
+
+	ath10k_warn("WARNING: Firmware version %s is not officially supported.\n",
+		    ar->hw->wiphy->fw_version);
+	ath10k_warn("Please upgrade to version %s (or newer)\n", version);
+
+	return 0;
+}
+
+static int ath10k_init_connect_htc(struct ath10k *ar)
+{
+	int status;
+
+	status = ath10k_wmi_connect_htc_service(ar);
+	if (status)
+		goto conn_fail;
+
+	/* Start HTC */
+	status = ath10k_htc_start(ar->htc);
+	if (status)
+		goto conn_fail;
+
+	/* Wait for WMI event to be ready */
+	status = ath10k_wmi_wait_for_service_ready(ar);
+	if (status <= 0) {
+		ath10k_warn("wmi service ready event not received");
+		status = -ETIMEDOUT;
+		goto timeout;
+	}
+
+	ath10k_dbg(ATH10K_DBG_CORE, "core wmi ready\n");
+	return 0;
+
+timeout:
+	ath10k_htc_stop(ar->htc);
+conn_fail:
+	return status;
+}
+
+static int ath10k_init_configure_target(struct ath10k *ar)
+{
+	u32 param_host;
+	int ret;
+
+	/* tell target which HTC version it is used*/
+	ret = ath10k_bmi_write32(ar, hi_app_host_interest,
+				 HTC_PROTOCOL_VERSION);
+	if (ret) {
+		ath10k_err("settings HTC version failed\n");
+		return ret;
+	}
+
+	/* set the firmware mode to STA/IBSS/AP */
+	ret = ath10k_bmi_read32(ar, hi_option_flag, &param_host);
+	if (ret) {
+		ath10k_err("setting firmware mode (1/2) failed\n");
+		return ret;
+	}
+
+	/* TODO following parameters need to be re-visited. */
+	/* num_device */
+	param_host |= (1 << HI_OPTION_NUM_DEV_SHIFT);
+	/* Firmware mode */
+	/* FIXME: Why FW_MODE_AP ??.*/
+	param_host |= (HI_OPTION_FW_MODE_AP << HI_OPTION_FW_MODE_SHIFT);
+	/* mac_addr_method */
+	param_host |= (1 << HI_OPTION_MAC_ADDR_METHOD_SHIFT);
+	/* firmware_bridge */
+	param_host |= (0 << HI_OPTION_FW_BRIDGE_SHIFT);
+	/* fwsubmode */
+	param_host |= (0 << HI_OPTION_FW_SUBMODE_SHIFT);
+
+	ret = ath10k_bmi_write32(ar, hi_option_flag, param_host);
+	if (ret) {
+		ath10k_err("setting firmware mode (2/2) failed\n");
+		return ret;
+	}
+
+	/* We do all byte-swapping on the host */
+	ret = ath10k_bmi_write32(ar, hi_be, 0);
+	if (ret) {
+		ath10k_err("setting host CPU BE mode failed\n");
+		return ret;
+	}
+
+	/* FW descriptor/Data swap flags */
+	ret = ath10k_bmi_write32(ar, hi_fw_swap, 0);
+
+	if (ret) {
+		ath10k_err("setting FW data/desc swap flags failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct firmware *ath10k_fetch_fw_file(struct ath10k *ar,
+						   const char *dir,
+						   const char *file)
+{
+	char filename[100];
+	const struct firmware *fw;
+	int ret;
+
+	if (file == NULL)
+		return ERR_PTR(-ENOENT);
+
+	if (dir == NULL)
+		dir = ".";
+
+	snprintf(filename, sizeof(filename), "%s/%s", dir, file);
+	ret = request_firmware(&fw, filename, ar->dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return fw;
+}
+
+static int ath10k_push_board_ext_data(struct ath10k *ar,
+				      const struct firmware *fw)
+{
+	u32 board_data_size = QCA988X_BOARD_DATA_SZ;
+	u32 board_ext_data_size = QCA988X_BOARD_EXT_DATA_SZ;
+	u32 board_ext_data_addr;
+	int ret;
+
+	ret = ath10k_bmi_read32(ar, hi_board_ext_data, &board_ext_data_addr);
+	if (ret) {
+		ath10k_err("could not read board ext data addr (%d)\n", ret);
+		return ret;
+	}
+
+	ath10k_dbg(ATH10K_DBG_CORE,
+		   "ath10k: Board extended Data download addr: 0x%x\n",
+		   board_ext_data_addr);
+
+	if (board_ext_data_addr == 0)
+		return 0;
+
+	if (fw->size != (board_data_size + board_ext_data_size)) {
+		ath10k_err("invalid board (ext) data sizes %zu != %d+%d\n",
+			   fw->size, board_data_size, board_ext_data_size);
+		return -EINVAL;
+	}
+
+	ret = ath10k_bmi_write_memory(ar, board_ext_data_addr,
+				      fw->data + board_data_size,
+				      board_ext_data_size);
+	if (ret) {
+		ath10k_err("could not write board ext data (%d)\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_bmi_write32(ar, hi_board_ext_data_config,
+				 (board_ext_data_size << 16) | 1);
+	if (ret) {
+		ath10k_err("could not write board ext data bit (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_download_board_data(struct ath10k *ar)
+{
+	u32 board_data_size = QCA988X_BOARD_DATA_SZ;
+	u32 address;
+	const struct firmware *fw;
+	int ret;
+
+	fw = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir,
+				  ar->hw_params.fw.board);
+	if (IS_ERR(fw)) {
+		ath10k_err("could not fetch board data fw file (%ld)\n",
+			   PTR_ERR(fw));
+		return PTR_ERR(fw);
+	}
+
+	ret = ath10k_push_board_ext_data(ar, fw);
+	if (ret) {
+		ath10k_err("could not push board ext data (%d)\n", ret);
+		goto exit;
+	}
+
+	ret = ath10k_bmi_read32(ar, hi_board_data, &address);
+	if (ret) {
+		ath10k_err("could not read board data addr (%d)\n", ret);
+		goto exit;
+	}
+
+	ret = ath10k_bmi_write_memory(ar, address, fw->data,
+				      min_t(u32, board_data_size, fw->size));
+	if (ret) {
+		ath10k_err("could not write board data (%d)\n", ret);
+		goto exit;
+	}
+
+	ret = ath10k_bmi_write32(ar, hi_board_data_initialized, 1);
+	if (ret) {
+		ath10k_err("could not write board data bit (%d)\n", ret);
+		goto exit;
+	}
+
+exit:
+	release_firmware(fw);
+	return ret;
+}
+
+static int ath10k_download_and_run_otp(struct ath10k *ar)
+{
+	const struct firmware *fw;
+	u32 address;
+	u32 exec_param;
+	int ret;
+
+	/* OTP is optional */
+
+	if (ar->hw_params.fw.otp == NULL) {
+		ath10k_info("otp file not defined\n");
+		return 0;
+	}
+
+	address = ar->hw_params.patch_load_addr;
+
+	fw = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir,
+				  ar->hw_params.fw.otp);
+	if (IS_ERR(fw)) {
+		ath10k_warn("could not fetch otp (%ld)\n", PTR_ERR(fw));
+		return 0;
+	}
+
+	ret = ath10k_bmi_fast_download(ar, address, fw->data, fw->size);
+	if (ret) {
+		ath10k_err("could not write otp (%d)\n", ret);
+		goto exit;
+	}
+
+	exec_param = 0;
+	ret = ath10k_bmi_execute(ar, address, &exec_param);
+	if (ret) {
+		ath10k_err("could not execute otp (%d)\n", ret);
+		goto exit;
+	}
+
+exit:
+	release_firmware(fw);
+	return ret;
+}
+
+static int ath10k_download_fw(struct ath10k *ar)
+{
+	const struct firmware *fw;
+	u32 address;
+	int ret;
+
+	if (ar->hw_params.fw.fw == NULL)
+		return -EINVAL;
+
+	address = ar->hw_params.patch_load_addr;
+
+	fw = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir,
+				  ar->hw_params.fw.fw);
+	if (IS_ERR(fw)) {
+		ath10k_err("could not fetch fw (%ld)\n", PTR_ERR(fw));
+		return PTR_ERR(fw);
+	}
+
+	ret = ath10k_bmi_fast_download(ar, address, fw->data, fw->size);
+	if (ret) {
+		ath10k_err("could not write fw (%d)\n", ret);
+		goto exit;
+	}
+
+exit:
+	release_firmware(fw);
+	return ret;
+}
+
+static int ath10k_init_download_firmware(struct ath10k *ar)
+{
+	int ret;
+
+	ret = ath10k_download_board_data(ar);
+	if (ret)
+		return ret;
+
+	ret = ath10k_download_and_run_otp(ar);
+	if (ret)
+		return ret;
+
+	ret = ath10k_download_fw(ar);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+
+static int ath10k_init_uart(struct ath10k *ar)
+{
+	int ret;
+
+	/*
+	 * Explicitly setting UART prints to zero as target turns it on
+	 * based on scratch registers.
+	 */
+	ret = ath10k_bmi_write32(ar, hi_serial_enable, 0);
+	if (ret) {
+		ath10k_warn("could not disable UART prints (%d)\n", ret);
+		return ret;
+	}
+
+	if (!uart_print) {
+		ath10k_info("UART prints disabled\n");
+		return 0;
+	}
+
+	ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, 7);
+	if (ret) {
+		ath10k_warn("could not enable UART prints (%d)\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_bmi_write32(ar, hi_serial_enable, 1);
+	if (ret) {
+		ath10k_warn("could not enable UART prints (%d)\n", ret);
+		return ret;
+	}
+
+	ath10k_info("UART prints enabled\n");
+	return 0;
+}
+
+static int ath10k_init_hw_params(struct ath10k *ar)
+{
+	const struct ath10k_hw_params *uninitialized_var(hw_params);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ath10k_hw_params_list); i++) {
+		hw_params = &ath10k_hw_params_list[i];
+
+		if (hw_params->id == ar->target_version)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(ath10k_hw_params_list)) {
+		ath10k_err("Unsupported hardware version: 0x%x\n",
+			   ar->target_version);
+		return -EINVAL;
+	}
+
+	ar->hw_params = *hw_params;
+
+	ath10k_info("Hardware name %s version 0x%x\n",
+		    ar->hw_params.name, ar->target_version);
+
+	return 0;
+}
+
+struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
+				  enum ath10k_bus bus,
+				  const struct ath10k_hif_ops *hif_ops)
+{
+	struct ath10k *ar;
+
+	ar = ath10k_mac_create();
+	if (!ar)
+		return NULL;
+
+	ar->ath_common.priv = ar;
+	ar->ath_common.hw = ar->hw;
+
+	ar->p2p = !!ath10k_p2p;
+	ar->dev = dev;
+
+	ar->hif.priv = hif_priv;
+	ar->hif.ops = hif_ops;
+	ar->hif.bus = bus;
+
+	ar->free_vdev_map = 0xFF; /* 8 vdevs */
+
+	init_completion(&ar->scan.started);
+	init_completion(&ar->scan.completed);
+	init_completion(&ar->scan.on_channel);
+
+	init_completion(&ar->install_key_done);
+	init_completion(&ar->vdev_setup_done);
+
+	setup_timer(&ar->scan.timeout, ath10k_reset_scan, (unsigned long)ar);
+
+	ar->workqueue = create_singlethread_workqueue("ath10k_wq");
+	if (!ar->workqueue)
+		goto err_wq;
+
+	mutex_init(&ar->conf_mutex);
+	spin_lock_init(&ar->data_lock);
+
+	INIT_LIST_HEAD(&ar->peers);
+	init_waitqueue_head(&ar->peer_mapping_wq);
+
+	init_completion(&ar->offchan_tx_completed);
+	INIT_WORK(&ar->offchan_tx_work, ath10k_offchan_tx_work);
+	skb_queue_head_init(&ar->offchan_tx_queue);
+
+	init_waitqueue_head(&ar->event_queue);
+
+	return ar;
+
+err_wq:
+	ath10k_mac_destroy(ar);
+	return NULL;
+}
+EXPORT_SYMBOL(ath10k_core_create);
+
+void ath10k_core_destroy(struct ath10k *ar)
+{
+	flush_workqueue(ar->workqueue);
+	destroy_workqueue(ar->workqueue);
+
+	ath10k_mac_destroy(ar);
+}
+EXPORT_SYMBOL(ath10k_core_destroy);
+
+
+int ath10k_core_register(struct ath10k *ar)
+{
+	struct ath10k_htc_ops htc_ops;
+	struct bmi_target_info target_info;
+	int status;
+
+	memset(&target_info, 0, sizeof(target_info));
+	status = ath10k_bmi_get_target_info(ar, &target_info);
+	if (status)
+		goto err;
+
+	ar->target_version = target_info.version;
+	ar->hw->wiphy->hw_version = target_info.version;
+
+	status = ath10k_init_hw_params(ar);
+	if (status)
+		goto err;
+
+	if (ath10k_init_configure_target(ar)) {
+		status = -EINVAL;
+		goto err;
+	}
+
+	status = ath10k_init_download_firmware(ar);
+	if (status)
+		goto err;
+
+	status = ath10k_init_uart(ar);
+	if (status)
+		goto err;
+
+	htc_ops.target_send_suspend_complete = ath10k_send_suspend_complete;
+
+	ar->htc = ath10k_htc_create(ar, &htc_ops);
+	if (IS_ERR(ar->htc)) {
+		status = PTR_ERR(ar->htc);
+		ath10k_err("could not create HTC (%d)\n", status);
+		goto err;
+	}
+
+	status = ath10k_bmi_done(ar);
+	if (status)
+		goto err_htc_destroy;
+
+	status = ath10k_wmi_attach(ar);
+	if (status) {
+		ath10k_err("WMI attach failed: %d\n", status);
+		goto err_htc_destroy;
+	}
+
+	status = ath10k_htc_wait_target(ar->htc);
+	if (status)
+		goto err_wmi_detach;
+
+	ar->htt = ath10k_htt_attach(ar);
+	if (!ar->htt) {
+		status = -ENOMEM;
+		goto err_wmi_detach;
+	}
+
+	status = ath10k_init_connect_htc(ar);
+	if (status)
+		goto err_htt_detach;
+
+	ath10k_info("firmware %s booted\n", ar->hw->wiphy->fw_version);
+
+	status = ath10k_check_fw_version(ar);
+	if (status)
+		goto err_disconnect_htc;
+
+	status = ath10k_wmi_cmd_init(ar);
+	if (status) {
+		ath10k_err("could not send WMI init command (%d)\n", status);
+		goto err_disconnect_htc;
+	}
+
+	status = ath10k_wmi_wait_for_unified_ready(ar);
+	if (status <= 0) {
+		ath10k_err("wmi unified ready event not received\n");
+		status = -ETIMEDOUT;
+		goto err_disconnect_htc;
+	}
+
+	status = ath10k_htt_attach_target(ar->htt);
+	if (status)
+		goto err_disconnect_htc;
+
+	status = ath10k_mac_register(ar);
+	if (status)
+		goto err_disconnect_htc;
+
+	status = ath10k_debug_create(ar);
+	if (status) {
+		ath10k_err("unable to initialize debugfs\n");
+		goto err_unregister_mac;
+	}
+
+	return 0;
+
+err_unregister_mac:
+	ath10k_mac_unregister(ar);
+err_disconnect_htc:
+	ath10k_htc_stop(ar->htc);
+err_htt_detach:
+	ath10k_htt_detach(ar->htt);
+err_wmi_detach:
+	ath10k_wmi_detach(ar);
+err_htc_destroy:
+	ath10k_htc_destroy(ar->htc);
+err:
+	return status;
+}
+EXPORT_SYMBOL(ath10k_core_register);
+
+void ath10k_core_unregister(struct ath10k *ar)
+{
+	/* We must unregister from mac80211 before we stop HTC and HIF.
+	 * Otherwise we will fail to submit commands to FW and mac80211 will be
+	 * unhappy about callback failures. */
+	ath10k_mac_unregister(ar);
+	ath10k_htc_stop(ar->htc);
+	ath10k_htt_detach(ar->htt);
+	ath10k_wmi_detach(ar);
+	ath10k_htc_destroy(ar->htc);
+}
+EXPORT_SYMBOL(ath10k_core_unregister);
+
+int ath10k_core_target_suspend(struct ath10k *ar)
+{
+	int ret;
+
+	ath10k_dbg(ATH10K_DBG_CORE, "%s: called", __func__);
+
+	ret = ath10k_wmi_pdev_suspend_target(ar);
+	if (ret)
+		ath10k_warn("could not suspend target (%d)\n", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL(ath10k_core_target_suspend);
+
+int ath10k_core_target_resume(struct ath10k *ar)
+{
+	int ret;
+
+	ath10k_dbg(ATH10K_DBG_CORE, "%s: called", __func__);
+
+	ret = ath10k_wmi_pdev_resume_target(ar);
+	if (ret)
+		ath10k_warn("could not resume target (%d)\n", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL(ath10k_core_target_resume);
+
+MODULE_AUTHOR("Qualcomm Atheros");
+MODULE_DESCRIPTION("Core module for QCA988X PCIe devices.");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
new file mode 100644
index 000000000000..539336d1be4b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -0,0 +1,369 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _CORE_H_
+#define _CORE_H_
+
+#include <linux/completion.h>
+#include <linux/if_ether.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+
+#include "htc.h"
+#include "hw.h"
+#include "targaddrs.h"
+#include "wmi.h"
+#include "../ath.h"
+#include "../regd.h"
+
+#define MS(_v, _f) (((_v) & _f##_MASK) >> _f##_LSB)
+#define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
+#define WO(_f)      ((_f##_OFFSET) >> 2)
+
+#define ATH10K_SCAN_ID 0
+#define WMI_READY_TIMEOUT (5 * HZ)
+#define ATH10K_FLUSH_TIMEOUT_HZ (5*HZ)
+
+/* Antenna noise floor */
+#define ATH10K_DEFAULT_NOISE_FLOOR -95
+
+struct ath10k;
+
+enum ath10k_bus {
+	ATH10K_BUS_PCI,
+};
+
+struct ath10k_skb_cb {
+	dma_addr_t paddr;
+	bool is_mapped;
+	bool is_aborted;
+
+	struct {
+		u8 vdev_id;
+		u16 msdu_id;
+		u8 tid;
+		bool is_offchan;
+		bool is_conf;
+		bool discard;
+		bool no_ack;
+		u8 refcount;
+		struct sk_buff *txfrag;
+		struct sk_buff *msdu;
+	} __packed htt;
+
+	/* 4 bytes left on 64bit arch */
+} __packed;
+
+static inline struct ath10k_skb_cb *ATH10K_SKB_CB(struct sk_buff *skb)
+{
+	BUILD_BUG_ON(sizeof(struct ath10k_skb_cb) >
+		     IEEE80211_TX_INFO_DRIVER_DATA_SIZE);
+	return (struct ath10k_skb_cb *)&IEEE80211_SKB_CB(skb)->driver_data;
+}
+
+static inline int ath10k_skb_map(struct device *dev, struct sk_buff *skb)
+{
+	if (ATH10K_SKB_CB(skb)->is_mapped)
+		return -EINVAL;
+
+	ATH10K_SKB_CB(skb)->paddr = dma_map_single(dev, skb->data, skb->len,
+						   DMA_TO_DEVICE);
+
+	if (unlikely(dma_mapping_error(dev, ATH10K_SKB_CB(skb)->paddr)))
+		return -EIO;
+
+	ATH10K_SKB_CB(skb)->is_mapped = true;
+	return 0;
+}
+
+static inline int ath10k_skb_unmap(struct device *dev, struct sk_buff *skb)
+{
+	if (!ATH10K_SKB_CB(skb)->is_mapped)
+		return -EINVAL;
+
+	dma_unmap_single(dev, ATH10K_SKB_CB(skb)->paddr, skb->len,
+			 DMA_TO_DEVICE);
+	ATH10K_SKB_CB(skb)->is_mapped = false;
+	return 0;
+}
+
+static inline u32 host_interest_item_address(u32 item_offset)
+{
+	return QCA988X_HOST_INTEREST_ADDRESS + item_offset;
+}
+
+struct ath10k_bmi {
+	bool done_sent;
+};
+
+struct ath10k_wmi {
+	enum ath10k_htc_ep_id eid;
+	struct completion service_ready;
+	struct completion unified_ready;
+	atomic_t pending_tx_count;
+	wait_queue_head_t wq;
+
+	struct sk_buff_head wmi_event_list;
+	struct work_struct wmi_event_work;
+};
+
+struct ath10k_peer_stat {
+	u8 peer_macaddr[ETH_ALEN];
+	u32 peer_rssi;
+	u32 peer_tx_rate;
+};
+
+struct ath10k_target_stats {
+	/* PDEV stats */
+	s32 ch_noise_floor;
+	u32 tx_frame_count;
+	u32 rx_frame_count;
+	u32 rx_clear_count;
+	u32 cycle_count;
+	u32 phy_err_count;
+	u32 chan_tx_power;
+
+	/* PDEV TX stats */
+	s32 comp_queued;
+	s32 comp_delivered;
+	s32 msdu_enqued;
+	s32 mpdu_enqued;
+	s32 wmm_drop;
+	s32 local_enqued;
+	s32 local_freed;
+	s32 hw_queued;
+	s32 hw_reaped;
+	s32 underrun;
+	s32 tx_abort;
+	s32 mpdus_requed;
+	u32 tx_ko;
+	u32 data_rc;
+	u32 self_triggers;
+	u32 sw_retry_failure;
+	u32 illgl_rate_phy_err;
+	u32 pdev_cont_xretry;
+	u32 pdev_tx_timeout;
+	u32 pdev_resets;
+	u32 phy_underrun;
+	u32 txop_ovf;
+
+	/* PDEV RX stats */
+	s32 mid_ppdu_route_change;
+	s32 status_rcvd;
+	s32 r0_frags;
+	s32 r1_frags;
+	s32 r2_frags;
+	s32 r3_frags;
+	s32 htt_msdus;
+	s32 htt_mpdus;
+	s32 loc_msdus;
+	s32 loc_mpdus;
+	s32 oversize_amsdu;
+	s32 phy_errs;
+	s32 phy_err_drop;
+	s32 mpdu_errs;
+
+	/* VDEV STATS */
+
+	/* PEER STATS */
+	u8 peers;
+	struct ath10k_peer_stat peer_stat[TARGET_NUM_PEERS];
+
+	/* TODO: Beacon filter stats */
+
+};
+
+#define ATH10K_MAX_NUM_PEER_IDS (1 << 11) /* htt rx_desc limit */
+
+struct ath10k_peer {
+	struct list_head list;
+	int vdev_id;
+	u8 addr[ETH_ALEN];
+	DECLARE_BITMAP(peer_ids, ATH10K_MAX_NUM_PEER_IDS);
+	struct ieee80211_key_conf *keys[WMI_MAX_KEY_INDEX + 1];
+};
+
+#define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5*HZ)
+
+struct ath10k_vif {
+	u32 vdev_id;
+	enum wmi_vdev_type vdev_type;
+	enum wmi_vdev_subtype vdev_subtype;
+	u32 beacon_interval;
+	u32 dtim_period;
+
+	struct ath10k *ar;
+	struct ieee80211_vif *vif;
+
+	struct ieee80211_key_conf *wep_keys[WMI_MAX_KEY_INDEX + 1];
+	u8 def_wep_key_index;
+
+	u16 tx_seq_no;
+
+	union {
+		struct {
+			u8 bssid[ETH_ALEN];
+			u32 uapsd;
+		} sta;
+		struct {
+			/* 127 stations; wmi limit */
+			u8 tim_bitmap[16];
+			u8 tim_len;
+			u32 ssid_len;
+			u8 ssid[IEEE80211_MAX_SSID_LEN];
+			bool hidden_ssid;
+			/* P2P_IE with NoA attribute for P2P_GO case */
+			u32 noa_len;
+			u8 *noa_data;
+		} ap;
+		struct {
+			u8 bssid[ETH_ALEN];
+		} ibss;
+	} u;
+};
+
+struct ath10k_vif_iter {
+	u32 vdev_id;
+	struct ath10k_vif *arvif;
+};
+
+struct ath10k_debug {
+	struct dentry *debugfs_phy;
+
+	struct ath10k_target_stats target_stats;
+	u32 wmi_service_bitmap[WMI_SERVICE_BM_SIZE];
+
+	struct completion event_stats_compl;
+};
+
+struct ath10k {
+	struct ath_common ath_common;
+	struct ieee80211_hw *hw;
+	struct device *dev;
+	u8 mac_addr[ETH_ALEN];
+
+	u32 target_version;
+	u8 fw_version_major;
+	u32 fw_version_minor;
+	u16 fw_version_release;
+	u16 fw_version_build;
+	u32 phy_capability;
+	u32 hw_min_tx_power;
+	u32 hw_max_tx_power;
+	u32 ht_cap_info;
+	u32 vht_cap_info;
+
+	struct targetdef *targetdef;
+	struct hostdef *hostdef;
+
+	bool p2p;
+
+	struct {
+		void *priv;
+		enum ath10k_bus bus;
+		const struct ath10k_hif_ops *ops;
+	} hif;
+
+	struct ath10k_wmi wmi;
+
+	wait_queue_head_t event_queue;
+	bool is_target_paused;
+
+	struct ath10k_bmi bmi;
+
+	struct ath10k_htc *htc;
+	struct ath10k_htt *htt;
+
+	struct ath10k_hw_params {
+		u32 id;
+		const char *name;
+		u32 patch_load_addr;
+
+		struct ath10k_hw_params_fw {
+			const char *dir;
+			const char *fw;
+			const char *otp;
+			const char *board;
+		} fw;
+	} hw_params;
+
+	struct {
+		struct completion started;
+		struct completion completed;
+		struct completion on_channel;
+		struct timer_list timeout;
+		bool is_roc;
+		bool in_progress;
+		bool aborting;
+		int vdev_id;
+		int roc_freq;
+	} scan;
+
+	struct {
+		struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
+	} mac;
+
+	/* should never be NULL; needed for regular htt rx */
+	struct ieee80211_channel *rx_channel;
+
+	/* valid during scan; needed for mgmt rx during scan */
+	struct ieee80211_channel *scan_channel;
+
+	int free_vdev_map;
+	int monitor_vdev_id;
+	bool monitor_enabled;
+	bool monitor_present;
+	unsigned int filter_flags;
+
+	struct wmi_pdev_set_wmm_params_arg wmm_params;
+	struct completion install_key_done;
+
+	struct completion vdev_setup_done;
+
+	struct workqueue_struct *workqueue;
+
+	/* prevents concurrent FW reconfiguration */
+	struct mutex conf_mutex;
+
+	/* protects shared structure data */
+	spinlock_t data_lock;
+
+	struct list_head peers;
+	wait_queue_head_t peer_mapping_wq;
+
+	struct work_struct offchan_tx_work;
+	struct sk_buff_head offchan_tx_queue;
+	struct completion offchan_tx_completed;
+	struct sk_buff *offchan_tx_skb;
+
+#ifdef CONFIG_ATH10K_DEBUGFS
+	struct ath10k_debug debug;
+#endif
+};
+
+struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
+				  enum ath10k_bus bus,
+				  const struct ath10k_hif_ops *hif_ops);
+void ath10k_core_destroy(struct ath10k *ar);
+
+int ath10k_core_register(struct ath10k *ar);
+void ath10k_core_unregister(struct ath10k *ar);
+
+int ath10k_core_target_suspend(struct ath10k *ar);
+int ath10k_core_target_resume(struct ath10k *ar);
+
+#endif /* _CORE_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
new file mode 100644
index 000000000000..499034b873d1
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -0,0 +1,503 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/debugfs.h>
+
+#include "core.h"
+#include "debug.h"
+
+static int ath10k_printk(const char *level, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+	int rtn;
+
+	va_start(args, fmt);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	rtn = printk("%sath10k: %pV", level, &vaf);
+
+	va_end(args);
+
+	return rtn;
+}
+
+int ath10k_info(const char *fmt, ...)
+{
+	struct va_format vaf = {
+		.fmt = fmt,
+	};
+	va_list args;
+	int ret;
+
+	va_start(args, fmt);
+	vaf.va = &args;
+	ret = ath10k_printk(KERN_INFO, "%pV", &vaf);
+	trace_ath10k_log_info(&vaf);
+	va_end(args);
+
+	return ret;
+}
+EXPORT_SYMBOL(ath10k_info);
+
+int ath10k_err(const char *fmt, ...)
+{
+	struct va_format vaf = {
+		.fmt = fmt,
+	};
+	va_list args;
+	int ret;
+
+	va_start(args, fmt);
+	vaf.va = &args;
+	ret = ath10k_printk(KERN_ERR, "%pV", &vaf);
+	trace_ath10k_log_err(&vaf);
+	va_end(args);
+
+	return ret;
+}
+EXPORT_SYMBOL(ath10k_err);
+
+int ath10k_warn(const char *fmt, ...)
+{
+	struct va_format vaf = {
+		.fmt = fmt,
+	};
+	va_list args;
+	int ret = 0;
+
+	va_start(args, fmt);
+	vaf.va = &args;
+
+	if (net_ratelimit())
+		ret = ath10k_printk(KERN_WARNING, "%pV", &vaf);
+
+	trace_ath10k_log_warn(&vaf);
+
+	va_end(args);
+
+	return ret;
+}
+EXPORT_SYMBOL(ath10k_warn);
+
+#ifdef CONFIG_ATH10K_DEBUGFS
+
+void ath10k_debug_read_service_map(struct ath10k *ar,
+				   void *service_map,
+				   size_t map_size)
+{
+	memcpy(ar->debug.wmi_service_bitmap, service_map, map_size);
+}
+
+static ssize_t ath10k_read_wmi_services(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct ath10k *ar = file->private_data;
+	char *buf;
+	unsigned int len = 0, buf_len = 1500;
+	const char *status;
+	ssize_t ret_cnt;
+	int i;
+
+	buf = kzalloc(buf_len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (len > buf_len)
+		len = buf_len;
+
+	for (i = 0; i < WMI_SERVICE_LAST; i++) {
+		if (WMI_SERVICE_IS_ENABLED(ar->debug.wmi_service_bitmap, i))
+			status = "enabled";
+		else
+			status = "disabled";
+
+		len += scnprintf(buf + len, buf_len - len,
+				 "0x%02x - %20s - %s\n",
+				 i, wmi_service_name(i), status);
+	}
+
+	ret_cnt = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+
+	mutex_unlock(&ar->conf_mutex);
+
+	kfree(buf);
+	return ret_cnt;
+}
+
+static const struct file_operations fops_wmi_services = {
+	.read = ath10k_read_wmi_services,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+void ath10k_debug_read_target_stats(struct ath10k *ar,
+				    struct wmi_stats_event *ev)
+{
+	u8 *tmp = ev->data;
+	struct ath10k_target_stats *stats;
+	int num_pdev_stats, num_vdev_stats, num_peer_stats;
+	struct wmi_pdev_stats *ps;
+	int i;
+
+	mutex_lock(&ar->conf_mutex);
+
+	stats = &ar->debug.target_stats;
+
+	num_pdev_stats = __le32_to_cpu(ev->num_pdev_stats); /* 0 or 1 */
+	num_vdev_stats = __le32_to_cpu(ev->num_vdev_stats); /* 0 or max vdevs */
+	num_peer_stats = __le32_to_cpu(ev->num_peer_stats); /* 0 or max peers */
+
+	if (num_pdev_stats) {
+		ps = (struct wmi_pdev_stats *)tmp;
+
+		stats->ch_noise_floor = __le32_to_cpu(ps->chan_nf);
+		stats->tx_frame_count = __le32_to_cpu(ps->tx_frame_count);
+		stats->rx_frame_count = __le32_to_cpu(ps->rx_frame_count);
+		stats->rx_clear_count = __le32_to_cpu(ps->rx_clear_count);
+		stats->cycle_count = __le32_to_cpu(ps->cycle_count);
+		stats->phy_err_count = __le32_to_cpu(ps->phy_err_count);
+		stats->chan_tx_power = __le32_to_cpu(ps->chan_tx_pwr);
+
+		stats->comp_queued = __le32_to_cpu(ps->wal.tx.comp_queued);
+		stats->comp_delivered =
+			__le32_to_cpu(ps->wal.tx.comp_delivered);
+		stats->msdu_enqued = __le32_to_cpu(ps->wal.tx.msdu_enqued);
+		stats->mpdu_enqued = __le32_to_cpu(ps->wal.tx.mpdu_enqued);
+		stats->wmm_drop = __le32_to_cpu(ps->wal.tx.wmm_drop);
+		stats->local_enqued = __le32_to_cpu(ps->wal.tx.local_enqued);
+		stats->local_freed = __le32_to_cpu(ps->wal.tx.local_freed);
+		stats->hw_queued = __le32_to_cpu(ps->wal.tx.hw_queued);
+		stats->hw_reaped = __le32_to_cpu(ps->wal.tx.hw_reaped);
+		stats->underrun = __le32_to_cpu(ps->wal.tx.underrun);
+		stats->tx_abort = __le32_to_cpu(ps->wal.tx.tx_abort);
+		stats->mpdus_requed = __le32_to_cpu(ps->wal.tx.mpdus_requed);
+		stats->tx_ko = __le32_to_cpu(ps->wal.tx.tx_ko);
+		stats->data_rc = __le32_to_cpu(ps->wal.tx.data_rc);
+		stats->self_triggers = __le32_to_cpu(ps->wal.tx.self_triggers);
+		stats->sw_retry_failure =
+			__le32_to_cpu(ps->wal.tx.sw_retry_failure);
+		stats->illgl_rate_phy_err =
+			__le32_to_cpu(ps->wal.tx.illgl_rate_phy_err);
+		stats->pdev_cont_xretry =
+			__le32_to_cpu(ps->wal.tx.pdev_cont_xretry);
+		stats->pdev_tx_timeout =
+			__le32_to_cpu(ps->wal.tx.pdev_tx_timeout);
+		stats->pdev_resets = __le32_to_cpu(ps->wal.tx.pdev_resets);
+		stats->phy_underrun = __le32_to_cpu(ps->wal.tx.phy_underrun);
+		stats->txop_ovf = __le32_to_cpu(ps->wal.tx.txop_ovf);
+
+		stats->mid_ppdu_route_change =
+			__le32_to_cpu(ps->wal.rx.mid_ppdu_route_change);
+		stats->status_rcvd = __le32_to_cpu(ps->wal.rx.status_rcvd);
+		stats->r0_frags = __le32_to_cpu(ps->wal.rx.r0_frags);
+		stats->r1_frags = __le32_to_cpu(ps->wal.rx.r1_frags);
+		stats->r2_frags = __le32_to_cpu(ps->wal.rx.r2_frags);
+		stats->r3_frags = __le32_to_cpu(ps->wal.rx.r3_frags);
+		stats->htt_msdus = __le32_to_cpu(ps->wal.rx.htt_msdus);
+		stats->htt_mpdus = __le32_to_cpu(ps->wal.rx.htt_mpdus);
+		stats->loc_msdus = __le32_to_cpu(ps->wal.rx.loc_msdus);
+		stats->loc_mpdus = __le32_to_cpu(ps->wal.rx.loc_mpdus);
+		stats->oversize_amsdu =
+			__le32_to_cpu(ps->wal.rx.oversize_amsdu);
+		stats->phy_errs = __le32_to_cpu(ps->wal.rx.phy_errs);
+		stats->phy_err_drop = __le32_to_cpu(ps->wal.rx.phy_err_drop);
+		stats->mpdu_errs = __le32_to_cpu(ps->wal.rx.mpdu_errs);
+
+		tmp += sizeof(struct wmi_pdev_stats);
+	}
+
+	/* 0 or max vdevs */
+	/* Currently firmware does not support VDEV stats */
+	if (num_vdev_stats) {
+		struct wmi_vdev_stats *vdev_stats;
+
+		for (i = 0; i < num_vdev_stats; i++) {
+			vdev_stats = (struct wmi_vdev_stats *)tmp;
+			tmp += sizeof(struct wmi_vdev_stats);
+		}
+	}
+
+	if (num_peer_stats) {
+		struct wmi_peer_stats *peer_stats;
+		struct ath10k_peer_stat *s;
+
+		stats->peers = num_peer_stats;
+
+		for (i = 0; i < num_peer_stats; i++) {
+			peer_stats = (struct wmi_peer_stats *)tmp;
+			s = &stats->peer_stat[i];
+
+			WMI_MAC_ADDR_TO_CHAR_ARRAY(&peer_stats->peer_macaddr,
+						   s->peer_macaddr);
+			s->peer_rssi = __le32_to_cpu(peer_stats->peer_rssi);
+			s->peer_tx_rate =
+				__le32_to_cpu(peer_stats->peer_tx_rate);
+
+			tmp += sizeof(struct wmi_peer_stats);
+		}
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+	complete(&ar->debug.event_stats_compl);
+}
+
+static ssize_t ath10k_read_fw_stats(struct file *file, char __user *user_buf,
+				    size_t count, loff_t *ppos)
+{
+	struct ath10k *ar = file->private_data;
+	struct ath10k_target_stats *fw_stats;
+	char *buf;
+	unsigned int len = 0, buf_len = 2500;
+	ssize_t ret_cnt;
+	long left;
+	int i;
+	int ret;
+
+	fw_stats = &ar->debug.target_stats;
+
+	buf = kzalloc(buf_len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = ath10k_wmi_request_stats(ar, WMI_REQUEST_PEER_STAT);
+	if (ret) {
+		ath10k_warn("could not request stats (%d)\n", ret);
+		kfree(buf);
+		return -EIO;
+	}
+
+	left = wait_for_completion_timeout(&ar->debug.event_stats_compl, 1*HZ);
+
+	if (left <= 0) {
+		kfree(buf);
+		return -ETIMEDOUT;
+	}
+
+	mutex_lock(&ar->conf_mutex);
+
+	len += scnprintf(buf + len, buf_len - len, "\n");
+	len += scnprintf(buf + len, buf_len - len, "%30s\n",
+			 "ath10k PDEV stats");
+	len += scnprintf(buf + len, buf_len - len, "%30s\n\n",
+				 "=================");
+
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Channel noise floor", fw_stats->ch_noise_floor);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
+			 "Channel TX power", fw_stats->chan_tx_power);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
+			 "TX frame count", fw_stats->tx_frame_count);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
+			 "RX frame count", fw_stats->rx_frame_count);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
+			 "RX clear count", fw_stats->rx_clear_count);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
+			 "Cycle count", fw_stats->cycle_count);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
+			 "PHY error count", fw_stats->phy_err_count);
+
+	len += scnprintf(buf + len, buf_len - len, "\n");
+	len += scnprintf(buf + len, buf_len - len, "%30s\n",
+			 "ath10k PDEV TX stats");
+	len += scnprintf(buf + len, buf_len - len, "%30s\n\n",
+				 "=================");
+
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "HTT cookies queued", fw_stats->comp_queued);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "HTT cookies disp.", fw_stats->comp_delivered);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "MSDU queued", fw_stats->msdu_enqued);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "MPDU queued", fw_stats->mpdu_enqued);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "MSDUs dropped", fw_stats->wmm_drop);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Local enqued", fw_stats->local_enqued);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Local freed", fw_stats->local_freed);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "HW queued", fw_stats->hw_queued);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "PPDUs reaped", fw_stats->hw_reaped);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Num underruns", fw_stats->underrun);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "PPDUs cleaned", fw_stats->tx_abort);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "MPDUs requed", fw_stats->mpdus_requed);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Excessive retries", fw_stats->tx_ko);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "HW rate", fw_stats->data_rc);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Sched self tiggers", fw_stats->self_triggers);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Dropped due to SW retries",
+			 fw_stats->sw_retry_failure);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Illegal rate phy errors",
+			 fw_stats->illgl_rate_phy_err);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Pdev continous xretry", fw_stats->pdev_cont_xretry);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "TX timeout", fw_stats->pdev_tx_timeout);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "PDEV resets", fw_stats->pdev_resets);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "PHY underrun", fw_stats->phy_underrun);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "MPDU is more than txop limit", fw_stats->txop_ovf);
+
+	len += scnprintf(buf + len, buf_len - len, "\n");
+	len += scnprintf(buf + len, buf_len - len, "%30s\n",
+			 "ath10k PDEV RX stats");
+	len += scnprintf(buf + len, buf_len - len, "%30s\n\n",
+				 "=================");
+
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Mid PPDU route change",
+			 fw_stats->mid_ppdu_route_change);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Tot. number of statuses", fw_stats->status_rcvd);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Extra frags on rings 0", fw_stats->r0_frags);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Extra frags on rings 1", fw_stats->r1_frags);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Extra frags on rings 2", fw_stats->r2_frags);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Extra frags on rings 3", fw_stats->r3_frags);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "MSDUs delivered to HTT", fw_stats->htt_msdus);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "MPDUs delivered to HTT", fw_stats->htt_mpdus);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "MSDUs delivered to stack", fw_stats->loc_msdus);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "MPDUs delivered to stack", fw_stats->loc_mpdus);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "Oversized AMSUs", fw_stats->oversize_amsdu);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "PHY errors", fw_stats->phy_errs);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "PHY errors drops", fw_stats->phy_err_drop);
+	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
+			 "MPDU errors (FCS, MIC, ENC)", fw_stats->mpdu_errs);
+
+	len += scnprintf(buf + len, buf_len - len, "\n");
+	len += scnprintf(buf + len, buf_len - len, "%30s\n",
+			 "ath10k PEER stats");
+	len += scnprintf(buf + len, buf_len - len, "%30s\n\n",
+				 "=================");
+
+	for (i = 0; i < fw_stats->peers; i++) {
+		len += scnprintf(buf + len, buf_len - len, "%30s %pM\n",
+				 "Peer MAC address",
+				 fw_stats->peer_stat[i].peer_macaddr);
+		len += scnprintf(buf + len, buf_len - len, "%30s %u\n",
+				 "Peer RSSI", fw_stats->peer_stat[i].peer_rssi);
+		len += scnprintf(buf + len, buf_len - len, "%30s %u\n",
+				 "Peer TX rate",
+				 fw_stats->peer_stat[i].peer_tx_rate);
+		len += scnprintf(buf + len, buf_len - len, "\n");
+	}
+
+	if (len > buf_len)
+		len = buf_len;
+
+	ret_cnt = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+
+	mutex_unlock(&ar->conf_mutex);
+
+	kfree(buf);
+	return ret_cnt;
+}
+
+static const struct file_operations fops_fw_stats = {
+	.read = ath10k_read_fw_stats,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+int ath10k_debug_create(struct ath10k *ar)
+{
+	ar->debug.debugfs_phy = debugfs_create_dir("ath10k",
+						   ar->hw->wiphy->debugfsdir);
+
+	if (!ar->debug.debugfs_phy)
+		return -ENOMEM;
+
+	init_completion(&ar->debug.event_stats_compl);
+
+	debugfs_create_file("fw_stats", S_IRUSR, ar->debug.debugfs_phy, ar,
+			    &fops_fw_stats);
+
+	debugfs_create_file("wmi_services", S_IRUSR, ar->debug.debugfs_phy, ar,
+			    &fops_wmi_services);
+
+	return 0;
+}
+#endif /* CONFIG_ATH10K_DEBUGFS */
+
+#ifdef CONFIG_ATH10K_DEBUG
+void ath10k_dbg(enum ath10k_debug_mask mask, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+
+	va_start(args, fmt);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	if (ath10k_debug_mask & mask)
+		ath10k_printk(KERN_DEBUG, "%pV", &vaf);
+
+	trace_ath10k_log_dbg(mask, &vaf);
+
+	va_end(args);
+}
+EXPORT_SYMBOL(ath10k_dbg);
+
+void ath10k_dbg_dump(enum ath10k_debug_mask mask,
+		     const char *msg, const char *prefix,
+		     const void *buf, size_t len)
+{
+	if (ath10k_debug_mask & mask) {
+		if (msg)
+			ath10k_dbg(mask, "%s\n", msg);
+
+		print_hex_dump_bytes(prefix, DUMP_PREFIX_OFFSET, buf, len);
+	}
+
+	/* tracing code doesn't like null strings :/ */
+	trace_ath10k_log_dbg_dump(msg ? msg : "", prefix ? prefix : "",
+				  buf, len);
+}
+EXPORT_SYMBOL(ath10k_dbg_dump);
+
+#endif /* CONFIG_ATH10K_DEBUG */
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
new file mode 100644
index 000000000000..168140c54028
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _DEBUG_H_
+#define _DEBUG_H_
+
+#include <linux/types.h>
+#include "trace.h"
+
+enum ath10k_debug_mask {
+	ATH10K_DBG_PCI		= 0x00000001,
+	ATH10K_DBG_WMI		= 0x00000002,
+	ATH10K_DBG_HTC		= 0x00000004,
+	ATH10K_DBG_HTT		= 0x00000008,
+	ATH10K_DBG_MAC		= 0x00000010,
+	ATH10K_DBG_CORE		= 0x00000020,
+	ATH10K_DBG_PCI_DUMP	= 0x00000040,
+	ATH10K_DBG_HTT_DUMP	= 0x00000080,
+	ATH10K_DBG_MGMT		= 0x00000100,
+	ATH10K_DBG_DATA		= 0x00000200,
+	ATH10K_DBG_ANY		= 0xffffffff,
+};
+
+extern unsigned int ath10k_debug_mask;
+
+extern __printf(1, 2) int ath10k_info(const char *fmt, ...);
+extern __printf(1, 2) int ath10k_err(const char *fmt, ...);
+extern __printf(1, 2) int ath10k_warn(const char *fmt, ...);
+
+#ifdef CONFIG_ATH10K_DEBUGFS
+int ath10k_debug_create(struct ath10k *ar);
+void ath10k_debug_read_service_map(struct ath10k *ar,
+				   void *service_map,
+				   size_t map_size);
+void ath10k_debug_read_target_stats(struct ath10k *ar,
+				    struct wmi_stats_event *ev);
+
+#else
+static inline int ath10k_debug_create(struct ath10k *ar)
+{
+	return 0;
+}
+
+static inline void ath10k_debug_read_service_map(struct ath10k *ar,
+						 void *service_map,
+						 size_t map_size)
+{
+}
+
+static inline void ath10k_debug_read_target_stats(struct ath10k *ar,
+						  struct wmi_stats_event *ev)
+{
+}
+#endif /* CONFIG_ATH10K_DEBUGFS */
+
+#ifdef CONFIG_ATH10K_DEBUG
+extern __printf(2, 3) void ath10k_dbg(enum ath10k_debug_mask mask,
+				      const char *fmt, ...);
+void ath10k_dbg_dump(enum ath10k_debug_mask mask,
+		     const char *msg, const char *prefix,
+		     const void *buf, size_t len);
+#else /* CONFIG_ATH10K_DEBUG */
+
+static inline int ath10k_dbg(enum ath10k_debug_mask dbg_mask,
+			     const char *fmt, ...)
+{
+	return 0;
+}
+
+static inline void ath10k_dbg_dump(enum ath10k_debug_mask mask,
+				   const char *msg, const char *prefix,
+				   const void *buf, size_t len)
+{
+}
+#endif /* CONFIG_ATH10K_DEBUG */
+#endif /* _DEBUG_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/hif.h b/drivers/net/wireless/ath/ath10k/hif.h
new file mode 100644
index 000000000000..73a24d44d1b4
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/hif.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _HIF_H_
+#define _HIF_H_
+
+#include <linux/kernel.h>
+#include "core.h"
+
+struct ath10k_hif_cb {
+	int (*tx_completion)(struct ath10k *ar,
+			     struct sk_buff *wbuf,
+			     unsigned transfer_id);
+	int (*rx_completion)(struct ath10k *ar,
+			     struct sk_buff *wbuf,
+			     u8 pipe_id);
+};
+
+struct ath10k_hif_ops {
+	/* Send the head of a buffer to HIF for transmission to the target. */
+	int (*send_head)(struct ath10k *ar, u8 pipe_id,
+			 unsigned int transfer_id,
+			 unsigned int nbytes,
+			 struct sk_buff *buf);
+
+	/*
+	 * API to handle HIF-specific BMI message exchanges, this API is
+	 * synchronous and only allowed to be called from a context that
+	 * can block (sleep)
+	 */
+	int (*exchange_bmi_msg)(struct ath10k *ar,
+				void *request, u32 request_len,
+				void *response, u32 *response_len);
+
+	int (*start)(struct ath10k *ar);
+
+	void (*stop)(struct ath10k *ar);
+
+	int (*map_service_to_pipe)(struct ath10k *ar, u16 service_id,
+				   u8 *ul_pipe, u8 *dl_pipe,
+				   int *ul_is_polled, int *dl_is_polled);
+
+	void (*get_default_pipe)(struct ath10k *ar, u8 *ul_pipe, u8 *dl_pipe);
+
+	/*
+	 * Check if prior sends have completed.
+	 *
+	 * Check whether the pipe in question has any completed
+	 * sends that have not yet been processed.
+	 * This function is only relevant for HIF pipes that are configured
+	 * to be polled rather than interrupt-driven.
+	 */
+	void (*send_complete_check)(struct ath10k *ar, u8 pipe_id, int force);
+
+	void (*init)(struct ath10k *ar,
+		     struct ath10k_hif_cb *callbacks);
+
+	u16 (*get_free_queue_number)(struct ath10k *ar, u8 pipe_id);
+};
+
+
+static inline int ath10k_hif_send_head(struct ath10k *ar, u8 pipe_id,
+				       unsigned int transfer_id,
+				       unsigned int nbytes,
+				       struct sk_buff *buf)
+{
+	return ar->hif.ops->send_head(ar, pipe_id, transfer_id, nbytes, buf);
+}
+
+static inline int ath10k_hif_exchange_bmi_msg(struct ath10k *ar,
+					      void *request, u32 request_len,
+					      void *response, u32 *response_len)
+{
+	return ar->hif.ops->exchange_bmi_msg(ar, request, request_len,
+					     response, response_len);
+}
+
+static inline int ath10k_hif_start(struct ath10k *ar)
+{
+	return ar->hif.ops->start(ar);
+}
+
+static inline void ath10k_hif_stop(struct ath10k *ar)
+{
+	return ar->hif.ops->stop(ar);
+}
+
+static inline int ath10k_hif_map_service_to_pipe(struct ath10k *ar,
+						 u16 service_id,
+						 u8 *ul_pipe, u8 *dl_pipe,
+						 int *ul_is_polled,
+						 int *dl_is_polled)
+{
+	return ar->hif.ops->map_service_to_pipe(ar, service_id,
+						ul_pipe, dl_pipe,
+						ul_is_polled, dl_is_polled);
+}
+
+static inline void ath10k_hif_get_default_pipe(struct ath10k *ar,
+					       u8 *ul_pipe, u8 *dl_pipe)
+{
+	ar->hif.ops->get_default_pipe(ar, ul_pipe, dl_pipe);
+}
+
+static inline void ath10k_hif_send_complete_check(struct ath10k *ar,
+						  u8 pipe_id, int force)
+{
+	ar->hif.ops->send_complete_check(ar, pipe_id, force);
+}
+
+static inline void ath10k_hif_init(struct ath10k *ar,
+				   struct ath10k_hif_cb *callbacks)
+{
+	ar->hif.ops->init(ar, callbacks);
+}
+
+static inline u16 ath10k_hif_get_free_queue_number(struct ath10k *ar,
+						   u8 pipe_id)
+{
+	return ar->hif.ops->get_free_queue_number(ar, pipe_id);
+}
+
+#endif /* _HIF_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
new file mode 100644
index 000000000000..74363c949392
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -0,0 +1,1000 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "core.h"
+#include "hif.h"
+#include "debug.h"
+
+/********/
+/* Send */
+/********/
+
+static inline void ath10k_htc_send_complete_check(struct ath10k_htc_ep *ep,
+						  int force)
+{
+	/*
+	 * Check whether HIF has any prior sends that have finished,
+	 * have not had the post-processing done.
+	 */
+	ath10k_hif_send_complete_check(ep->htc->ar, ep->ul_pipe_id, force);
+}
+
+static void ath10k_htc_control_tx_complete(struct ath10k *ar,
+					   struct sk_buff *skb)
+{
+	kfree_skb(skb);
+}
+
+static struct sk_buff *ath10k_htc_build_tx_ctrl_skb(void *ar)
+{
+	struct sk_buff *skb;
+	struct ath10k_skb_cb *skb_cb;
+
+	skb = dev_alloc_skb(ATH10K_HTC_CONTROL_BUFFER_SIZE);
+	if (!skb) {
+		ath10k_warn("Unable to allocate ctrl skb\n");
+		return NULL;
+	}
+
+	skb_reserve(skb, 20); /* FIXME: why 20 bytes? */
+	WARN_ONCE((unsigned long)skb->data & 3, "unaligned skb");
+
+	skb_cb = ATH10K_SKB_CB(skb);
+	memset(skb_cb, 0, sizeof(*skb_cb));
+
+	ath10k_dbg(ATH10K_DBG_HTC, "%s: skb %p\n", __func__, skb);
+	return skb;
+}
+
+static inline void ath10k_htc_restore_tx_skb(struct ath10k_htc *htc,
+					     struct sk_buff *skb)
+{
+	ath10k_skb_unmap(htc->ar->dev, skb);
+	skb_pull(skb, sizeof(struct ath10k_htc_hdr));
+}
+
+static void ath10k_htc_notify_tx_completion(struct ath10k_htc_ep *ep,
+					    struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_HTC, "%s: ep %d skb %p\n", __func__,
+		   ep->eid, skb);
+
+	ath10k_htc_restore_tx_skb(ep->htc, skb);
+
+	if (!ep->ep_ops.ep_tx_complete) {
+		ath10k_warn("no tx handler for eid %d\n", ep->eid);
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	ep->ep_ops.ep_tx_complete(ep->htc->ar, skb);
+}
+
+/* assumes tx_lock is held */
+static bool ath10k_htc_ep_need_credit_update(struct ath10k_htc_ep *ep)
+{
+	if (!ep->tx_credit_flow_enabled)
+		return false;
+	if (ep->tx_credits >= ep->tx_credits_per_max_message)
+		return false;
+
+	ath10k_dbg(ATH10K_DBG_HTC, "HTC: endpoint %d needs credit update\n",
+		   ep->eid);
+	return true;
+}
+
+static void ath10k_htc_prepare_tx_skb(struct ath10k_htc_ep *ep,
+				      struct sk_buff *skb)
+{
+	struct ath10k_htc_hdr *hdr;
+
+	hdr = (struct ath10k_htc_hdr *)skb->data;
+	memset(hdr, 0, sizeof(*hdr));
+
+	hdr->eid = ep->eid;
+	hdr->len = __cpu_to_le16(skb->len - sizeof(*hdr));
+
+	spin_lock_bh(&ep->htc->tx_lock);
+	hdr->seq_no = ep->seq_no++;
+
+	if (ath10k_htc_ep_need_credit_update(ep))
+		hdr->flags |= ATH10K_HTC_FLAG_NEED_CREDIT_UPDATE;
+
+	spin_unlock_bh(&ep->htc->tx_lock);
+}
+
+static int ath10k_htc_issue_skb(struct ath10k_htc *htc,
+				struct ath10k_htc_ep *ep,
+				struct sk_buff *skb,
+				u8 credits)
+{
+	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
+	int ret;
+
+	ath10k_dbg(ATH10K_DBG_HTC, "%s: ep %d skb %p\n", __func__,
+		   ep->eid, skb);
+
+	ath10k_htc_prepare_tx_skb(ep, skb);
+
+	ret = ath10k_skb_map(htc->ar->dev, skb);
+	if (ret)
+		goto err;
+
+	ret = ath10k_hif_send_head(htc->ar,
+				   ep->ul_pipe_id,
+				   ep->eid,
+				   skb->len,
+				   skb);
+	if (unlikely(ret))
+		goto err;
+
+	return 0;
+err:
+	ath10k_warn("HTC issue failed: %d\n", ret);
+
+	spin_lock_bh(&htc->tx_lock);
+	ep->tx_credits += credits;
+	spin_unlock_bh(&htc->tx_lock);
+
+	/* this is the simplest way to handle out-of-resources for non-credit
+	 * based endpoints. credit based endpoints can still get -ENOSR, but
+	 * this is highly unlikely as credit reservation should prevent that */
+	if (ret == -ENOSR) {
+		spin_lock_bh(&htc->tx_lock);
+		__skb_queue_head(&ep->tx_queue, skb);
+		spin_unlock_bh(&htc->tx_lock);
+
+		return ret;
+	}
+
+	skb_cb->is_aborted = true;
+	ath10k_htc_notify_tx_completion(ep, skb);
+
+	return ret;
+}
+
+static struct sk_buff *ath10k_htc_get_skb_credit_based(struct ath10k_htc *htc,
+						       struct ath10k_htc_ep *ep,
+						       u8 *credits)
+{
+	struct sk_buff *skb;
+	struct ath10k_skb_cb *skb_cb;
+	int credits_required;
+	int remainder;
+	unsigned int transfer_len;
+
+	lockdep_assert_held(&htc->tx_lock);
+
+	skb = __skb_dequeue(&ep->tx_queue);
+	if (!skb)
+		return NULL;
+
+	skb_cb = ATH10K_SKB_CB(skb);
+	transfer_len = skb->len;
+
+	if (likely(transfer_len <= htc->target_credit_size)) {
+		credits_required = 1;
+	} else {
+		/* figure out how many credits this message requires */
+		credits_required = transfer_len / htc->target_credit_size;
+		remainder = transfer_len % htc->target_credit_size;
+
+		if (remainder)
+			credits_required++;
+	}
+
+	ath10k_dbg(ATH10K_DBG_HTC, "Credits required %d got %d\n",
+		   credits_required, ep->tx_credits);
+
+	if (ep->tx_credits < credits_required) {
+		__skb_queue_head(&ep->tx_queue, skb);
+		return NULL;
+	}
+
+	ep->tx_credits -= credits_required;
+	*credits = credits_required;
+	return skb;
+}
+
+static void ath10k_htc_send_work(struct work_struct *work)
+{
+	struct ath10k_htc_ep *ep = container_of(work,
+					struct ath10k_htc_ep, send_work);
+	struct ath10k_htc *htc = ep->htc;
+	struct sk_buff *skb;
+	u8 credits = 0;
+	int ret;
+
+	while (true) {
+		if (ep->ul_is_polled)
+			ath10k_htc_send_complete_check(ep, 0);
+
+		spin_lock_bh(&htc->tx_lock);
+		if (ep->tx_credit_flow_enabled)
+			skb = ath10k_htc_get_skb_credit_based(htc, ep,
+							      &credits);
+		else
+			skb = __skb_dequeue(&ep->tx_queue);
+		spin_unlock_bh(&htc->tx_lock);
+
+		if (!skb)
+			break;
+
+		ret = ath10k_htc_issue_skb(htc, ep, skb, credits);
+		if (ret == -ENOSR)
+			break;
+	}
+}
+
+int ath10k_htc_send(struct ath10k_htc *htc,
+		    enum ath10k_htc_ep_id eid,
+		    struct sk_buff *skb)
+{
+	struct ath10k_htc_ep *ep = &htc->endpoint[eid];
+
+	if (eid >= ATH10K_HTC_EP_COUNT) {
+		ath10k_warn("Invalid endpoint id: %d\n", eid);
+		return -ENOENT;
+	}
+
+	skb_push(skb, sizeof(struct ath10k_htc_hdr));
+
+	spin_lock_bh(&htc->tx_lock);
+	__skb_queue_tail(&ep->tx_queue, skb);
+	spin_unlock_bh(&htc->tx_lock);
+
+	queue_work(htc->ar->workqueue, &ep->send_work);
+	return 0;
+}
+
+static int ath10k_htc_tx_completion_handler(struct ath10k *ar,
+					    struct sk_buff *skb,
+					    unsigned int eid)
+{
+	struct ath10k_htc *htc = ar->htc;
+	struct ath10k_htc_ep *ep = &htc->endpoint[eid];
+	bool stopping;
+
+	ath10k_htc_notify_tx_completion(ep, skb);
+	/* the skb now belongs to the completion handler */
+
+	spin_lock_bh(&htc->tx_lock);
+	stopping = htc->stopping;
+	spin_unlock_bh(&htc->tx_lock);
+
+	if (!ep->tx_credit_flow_enabled && !stopping)
+		/*
+		 * note: when using TX credit flow, the re-checking of
+		 * queues happens when credits flow back from the target.
+		 * in the non-TX credit case, we recheck after the packet
+		 * completes
+		 */
+		queue_work(ar->workqueue, &ep->send_work);
+
+	return 0;
+}
+
+/* flush endpoint TX queue */
+static void ath10k_htc_flush_endpoint_tx(struct ath10k_htc *htc,
+					 struct ath10k_htc_ep *ep)
+{
+	struct sk_buff *skb;
+	struct ath10k_skb_cb *skb_cb;
+
+	spin_lock_bh(&htc->tx_lock);
+	for (;;) {
+		skb = __skb_dequeue(&ep->tx_queue);
+		if (!skb)
+			break;
+
+		skb_cb = ATH10K_SKB_CB(skb);
+		skb_cb->is_aborted = true;
+		ath10k_htc_notify_tx_completion(ep, skb);
+	}
+	spin_unlock_bh(&htc->tx_lock);
+
+	cancel_work_sync(&ep->send_work);
+}
+
+/***********/
+/* Receive */
+/***********/
+
+static void
+ath10k_htc_process_credit_report(struct ath10k_htc *htc,
+				 const struct ath10k_htc_credit_report *report,
+				 int len,
+				 enum ath10k_htc_ep_id eid)
+{
+	struct ath10k_htc_ep *ep;
+	int i, n_reports;
+
+	if (len % sizeof(*report))
+		ath10k_warn("Uneven credit report len %d", len);
+
+	n_reports = len / sizeof(*report);
+
+	spin_lock_bh(&htc->tx_lock);
+	for (i = 0; i < n_reports; i++, report++) {
+		if (report->eid >= ATH10K_HTC_EP_COUNT)
+			break;
+
+		ath10k_dbg(ATH10K_DBG_HTC, "ep %d got %d credits\n",
+			   report->eid, report->credits);
+
+		ep = &htc->endpoint[report->eid];
+		ep->tx_credits += report->credits;
+
+		if (ep->tx_credits && !skb_queue_empty(&ep->tx_queue))
+			queue_work(htc->ar->workqueue, &ep->send_work);
+	}
+	spin_unlock_bh(&htc->tx_lock);
+}
+
+static int ath10k_htc_process_trailer(struct ath10k_htc *htc,
+				      u8 *buffer,
+				      int length,
+				      enum ath10k_htc_ep_id src_eid)
+{
+	int status = 0;
+	struct ath10k_htc_record *record;
+	u8 *orig_buffer;
+	int orig_length;
+	size_t len;
+
+	orig_buffer = buffer;
+	orig_length = length;
+
+	while (length > 0) {
+		record = (struct ath10k_htc_record *)buffer;
+
+		if (length < sizeof(record->hdr)) {
+			status = -EINVAL;
+			break;
+		}
+
+		if (record->hdr.len > length) {
+			/* no room left in buffer for record */
+			ath10k_warn("Invalid record length: %d\n",
+				    record->hdr.len);
+			status = -EINVAL;
+			break;
+		}
+
+		switch (record->hdr.id) {
+		case ATH10K_HTC_RECORD_CREDITS:
+			len = sizeof(struct ath10k_htc_credit_report);
+			if (record->hdr.len < len) {
+				ath10k_warn("Credit report too long\n");
+				status = -EINVAL;
+				break;
+			}
+			ath10k_htc_process_credit_report(htc,
+							 record->credit_report,
+							 record->hdr.len,
+							 src_eid);
+			break;
+		default:
+			ath10k_warn("Unhandled record: id:%d length:%d\n",
+				    record->hdr.id, record->hdr.len);
+			break;
+		}
+
+		if (status)
+			break;
+
+		/* multiple records may be present in a trailer */
+		buffer += sizeof(record->hdr) + record->hdr.len;
+		length -= sizeof(record->hdr) + record->hdr.len;
+	}
+
+	if (status)
+		ath10k_dbg_dump(ATH10K_DBG_HTC, "htc rx bad trailer", "",
+				orig_buffer, orig_length);
+
+	return status;
+}
+
+static int ath10k_htc_rx_completion_handler(struct ath10k *ar,
+					    struct sk_buff *skb,
+					    u8 pipe_id)
+{
+	int status = 0;
+	struct ath10k_htc *htc = ar->htc;
+	struct ath10k_htc_hdr *hdr;
+	struct ath10k_htc_ep *ep;
+	u16 payload_len;
+	u32 trailer_len = 0;
+	size_t min_len;
+	u8 eid;
+	bool trailer_present;
+
+	hdr = (struct ath10k_htc_hdr *)skb->data;
+	skb_pull(skb, sizeof(*hdr));
+
+	eid = hdr->eid;
+
+	if (eid >= ATH10K_HTC_EP_COUNT) {
+		ath10k_warn("HTC Rx: invalid eid %d\n", eid);
+		ath10k_dbg_dump(ATH10K_DBG_HTC, "htc bad header", "",
+				hdr, sizeof(*hdr));
+		status = -EINVAL;
+		goto out;
+	}
+
+	ep = &htc->endpoint[eid];
+
+	/*
+	 * If this endpoint that received a message from the target has
+	 * a to-target HIF pipe whose send completions are polled rather
+	 * than interrupt-driven, this is a good point to ask HIF to check
+	 * whether it has any completed sends to handle.
+	 */
+	if (ep->ul_is_polled)
+		ath10k_htc_send_complete_check(ep, 1);
+
+	payload_len = __le16_to_cpu(hdr->len);
+
+	if (payload_len + sizeof(*hdr) > ATH10K_HTC_MAX_LEN) {
+		ath10k_warn("HTC rx frame too long, len: %zu\n",
+			    payload_len + sizeof(*hdr));
+		ath10k_dbg_dump(ATH10K_DBG_HTC, "htc bad rx pkt len", "",
+				hdr, sizeof(*hdr));
+		status = -EINVAL;
+		goto out;
+	}
+
+	if (skb->len < payload_len) {
+		ath10k_dbg(ATH10K_DBG_HTC,
+			   "HTC Rx: insufficient length, got %d, expected %d\n",
+			   skb->len, payload_len);
+		ath10k_dbg_dump(ATH10K_DBG_HTC, "htc bad rx pkt len",
+				"", hdr, sizeof(*hdr));
+		status = -EINVAL;
+		goto out;
+	}
+
+	/* get flags to check for trailer */
+	trailer_present = hdr->flags & ATH10K_HTC_FLAG_TRAILER_PRESENT;
+	if (trailer_present) {
+		u8 *trailer;
+
+		trailer_len = hdr->trailer_len;
+		min_len = sizeof(struct ath10k_ath10k_htc_record_hdr);
+
+		if ((trailer_len < min_len) ||
+		    (trailer_len > payload_len)) {
+			ath10k_warn("Invalid trailer length: %d\n",
+				    trailer_len);
+			status = -EPROTO;
+			goto out;
+		}
+
+		trailer = (u8 *)hdr;
+		trailer += sizeof(*hdr);
+		trailer += payload_len;
+		trailer -= trailer_len;
+		status = ath10k_htc_process_trailer(htc, trailer,
+						    trailer_len, hdr->eid);
+		if (status)
+			goto out;
+
+		skb_trim(skb, skb->len - trailer_len);
+	}
+
+	if (((int)payload_len - (int)trailer_len) <= 0)
+		/* zero length packet with trailer data, just drop these */
+		goto out;
+
+	if (eid == ATH10K_HTC_EP_0) {
+		struct ath10k_htc_msg *msg = (struct ath10k_htc_msg *)skb->data;
+
+		switch (__le16_to_cpu(msg->hdr.message_id)) {
+		default:
+			/* handle HTC control message */
+			if (completion_done(&htc->ctl_resp)) {
+				/*
+				 * this is a fatal error, target should not be
+				 * sending unsolicited messages on the ep 0
+				 */
+				ath10k_warn("HTC rx ctrl still processing\n");
+				status = -EINVAL;
+				complete(&htc->ctl_resp);
+				goto out;
+			}
+
+			htc->control_resp_len =
+				min_t(int, skb->len,
+				      ATH10K_HTC_MAX_CTRL_MSG_LEN);
+
+			memcpy(htc->control_resp_buffer, skb->data,
+			       htc->control_resp_len);
+
+			complete(&htc->ctl_resp);
+			break;
+		case ATH10K_HTC_MSG_SEND_SUSPEND_COMPLETE:
+			htc->htc_ops.target_send_suspend_complete(ar);
+		}
+		goto out;
+	}
+
+	ath10k_dbg(ATH10K_DBG_HTC, "htc rx completion ep %d skb %p\n",
+		   eid, skb);
+	ep->ep_ops.ep_rx_complete(ar, skb);
+
+	/* skb is now owned by the rx completion handler */
+	skb = NULL;
+out:
+	kfree_skb(skb);
+
+	return status;
+}
+
+static void ath10k_htc_control_rx_complete(struct ath10k *ar,
+					   struct sk_buff *skb)
+{
+	/* This is unexpected. FW is not supposed to send regular rx on this
+	 * endpoint. */
+	ath10k_warn("unexpected htc rx\n");
+	kfree_skb(skb);
+}
+
+/***************/
+/* Init/Deinit */
+/***************/
+
+static const char *htc_service_name(enum ath10k_htc_svc_id id)
+{
+	switch (id) {
+	case ATH10K_HTC_SVC_ID_RESERVED:
+		return "Reserved";
+	case ATH10K_HTC_SVC_ID_RSVD_CTRL:
+		return "Control";
+	case ATH10K_HTC_SVC_ID_WMI_CONTROL:
+		return "WMI";
+	case ATH10K_HTC_SVC_ID_WMI_DATA_BE:
+		return "DATA BE";
+	case ATH10K_HTC_SVC_ID_WMI_DATA_BK:
+		return "DATA BK";
+	case ATH10K_HTC_SVC_ID_WMI_DATA_VI:
+		return "DATA VI";
+	case ATH10K_HTC_SVC_ID_WMI_DATA_VO:
+		return "DATA VO";
+	case ATH10K_HTC_SVC_ID_NMI_CONTROL:
+		return "NMI Control";
+	case ATH10K_HTC_SVC_ID_NMI_DATA:
+		return "NMI Data";
+	case ATH10K_HTC_SVC_ID_HTT_DATA_MSG:
+		return "HTT Data";
+	case ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS:
+		return "RAW";
+	}
+
+	return "Unknown";
+}
+
+static void ath10k_htc_reset_endpoint_states(struct ath10k_htc *htc)
+{
+	struct ath10k_htc_ep *ep;
+	int i;
+
+	for (i = ATH10K_HTC_EP_0; i < ATH10K_HTC_EP_COUNT; i++) {
+		ep = &htc->endpoint[i];
+		ep->service_id = ATH10K_HTC_SVC_ID_UNUSED;
+		ep->max_ep_message_len = 0;
+		ep->max_tx_queue_depth = 0;
+		ep->eid = i;
+		skb_queue_head_init(&ep->tx_queue);
+		ep->htc = htc;
+		ep->tx_credit_flow_enabled = true;
+		INIT_WORK(&ep->send_work, ath10k_htc_send_work);
+	}
+}
+
+static void ath10k_htc_setup_target_buffer_assignments(struct ath10k_htc *htc)
+{
+	struct ath10k_htc_svc_tx_credits *entry;
+
+	entry = &htc->service_tx_alloc[0];
+
+	/*
+	 * for PCIE allocate all credists/HTC buffers to WMI.
+	 * no buffers are used/required for data. data always
+	 * remains on host.
+	 */
+	entry++;
+	entry->service_id = ATH10K_HTC_SVC_ID_WMI_CONTROL;
+	entry->credit_allocation = htc->total_transmit_credits;
+}
+
+static u8 ath10k_htc_get_credit_allocation(struct ath10k_htc *htc,
+					   u16 service_id)
+{
+	u8 allocation = 0;
+	int i;
+
+	for (i = 0; i < ATH10K_HTC_EP_COUNT; i++) {
+		if (htc->service_tx_alloc[i].service_id == service_id)
+			allocation =
+			    htc->service_tx_alloc[i].credit_allocation;
+	}
+
+	return allocation;
+}
+
+int ath10k_htc_wait_target(struct ath10k_htc *htc)
+{
+	int status = 0;
+	struct ath10k_htc_svc_conn_req conn_req;
+	struct ath10k_htc_svc_conn_resp conn_resp;
+	struct ath10k_htc_msg *msg;
+	u16 message_id;
+	u16 credit_count;
+	u16 credit_size;
+
+	INIT_COMPLETION(htc->ctl_resp);
+
+	status = ath10k_hif_start(htc->ar);
+	if (status) {
+		ath10k_err("could not start HIF (%d)\n", status);
+		goto err_start;
+	}
+
+	status = wait_for_completion_timeout(&htc->ctl_resp,
+					     ATH10K_HTC_WAIT_TIMEOUT_HZ);
+	if (status <= 0) {
+		if (status == 0)
+			status = -ETIMEDOUT;
+
+		ath10k_err("ctl_resp never came in (%d)\n", status);
+		goto err_target;
+	}
+
+	if (htc->control_resp_len < sizeof(msg->hdr) + sizeof(msg->ready)) {
+		ath10k_err("Invalid HTC ready msg len:%d\n",
+			   htc->control_resp_len);
+
+		status = -ECOMM;
+		goto err_target;
+	}
+
+	msg = (struct ath10k_htc_msg *)htc->control_resp_buffer;
+	message_id   = __le16_to_cpu(msg->hdr.message_id);
+	credit_count = __le16_to_cpu(msg->ready.credit_count);
+	credit_size  = __le16_to_cpu(msg->ready.credit_size);
+
+	if (message_id != ATH10K_HTC_MSG_READY_ID) {
+		ath10k_err("Invalid HTC ready msg: 0x%x\n", message_id);
+		status = -ECOMM;
+		goto err_target;
+	}
+
+	htc->total_transmit_credits = credit_count;
+	htc->target_credit_size = credit_size;
+
+	ath10k_dbg(ATH10K_DBG_HTC,
+		   "Target ready! transmit resources: %d size:%d\n",
+		   htc->total_transmit_credits,
+		   htc->target_credit_size);
+
+	if ((htc->total_transmit_credits == 0) ||
+	    (htc->target_credit_size == 0)) {
+		status = -ECOMM;
+		ath10k_err("Invalid credit size received\n");
+		goto err_target;
+	}
+
+	ath10k_htc_setup_target_buffer_assignments(htc);
+
+	/* setup our pseudo HTC control endpoint connection */
+	memset(&conn_req, 0, sizeof(conn_req));
+	memset(&conn_resp, 0, sizeof(conn_resp));
+	conn_req.ep_ops.ep_tx_complete = ath10k_htc_control_tx_complete;
+	conn_req.ep_ops.ep_rx_complete = ath10k_htc_control_rx_complete;
+	conn_req.max_send_queue_depth = ATH10K_NUM_CONTROL_TX_BUFFERS;
+	conn_req.service_id = ATH10K_HTC_SVC_ID_RSVD_CTRL;
+
+	/* connect fake service */
+	status = ath10k_htc_connect_service(htc, &conn_req, &conn_resp);
+	if (status) {
+		ath10k_err("could not connect to htc service (%d)\n", status);
+		goto err_target;
+	}
+
+	return 0;
+err_target:
+	ath10k_hif_stop(htc->ar);
+err_start:
+	return status;
+}
+
+int ath10k_htc_connect_service(struct ath10k_htc *htc,
+			       struct ath10k_htc_svc_conn_req *conn_req,
+			       struct ath10k_htc_svc_conn_resp *conn_resp)
+{
+	struct ath10k_htc_msg *msg;
+	struct ath10k_htc_conn_svc *req_msg;
+	struct ath10k_htc_conn_svc_response resp_msg_dummy;
+	struct ath10k_htc_conn_svc_response *resp_msg = &resp_msg_dummy;
+	enum ath10k_htc_ep_id assigned_eid = ATH10K_HTC_EP_COUNT;
+	struct ath10k_htc_ep *ep;
+	struct sk_buff *skb;
+	unsigned int max_msg_size = 0;
+	int length, status;
+	bool disable_credit_flow_ctrl = false;
+	u16 message_id, service_id, flags = 0;
+	u8 tx_alloc = 0;
+
+	/* special case for HTC pseudo control service */
+	if (conn_req->service_id == ATH10K_HTC_SVC_ID_RSVD_CTRL) {
+		disable_credit_flow_ctrl = true;
+		assigned_eid = ATH10K_HTC_EP_0;
+		max_msg_size = ATH10K_HTC_MAX_CTRL_MSG_LEN;
+		memset(&resp_msg_dummy, 0, sizeof(resp_msg_dummy));
+		goto setup;
+	}
+
+	tx_alloc = ath10k_htc_get_credit_allocation(htc,
+						    conn_req->service_id);
+	if (!tx_alloc)
+		ath10k_warn("HTC Service %s does not allocate target credits\n",
+			    htc_service_name(conn_req->service_id));
+
+	skb = ath10k_htc_build_tx_ctrl_skb(htc->ar);
+	if (!skb) {
+		ath10k_err("Failed to allocate HTC packet\n");
+		return -ENOMEM;
+	}
+
+	length = sizeof(msg->hdr) + sizeof(msg->connect_service);
+	skb_put(skb, length);
+	memset(skb->data, 0, length);
+
+	msg = (struct ath10k_htc_msg *)skb->data;
+	msg->hdr.message_id =
+		__cpu_to_le16(ATH10K_HTC_MSG_CONNECT_SERVICE_ID);
+
+	flags |= SM(tx_alloc, ATH10K_HTC_CONN_FLAGS_RECV_ALLOC);
+
+	req_msg = &msg->connect_service;
+	req_msg->flags = __cpu_to_le16(flags);
+	req_msg->service_id = __cpu_to_le16(conn_req->service_id);
+
+	/* Only enable credit flow control for WMI ctrl service */
+	if (conn_req->service_id != ATH10K_HTC_SVC_ID_WMI_CONTROL) {
+		flags |= ATH10K_HTC_CONN_FLAGS_DISABLE_CREDIT_FLOW_CTRL;
+		disable_credit_flow_ctrl = true;
+	}
+
+	INIT_COMPLETION(htc->ctl_resp);
+
+	status = ath10k_htc_send(htc, ATH10K_HTC_EP_0, skb);
+	if (status) {
+		kfree_skb(skb);
+		return status;
+	}
+
+	/* wait for response */
+	status = wait_for_completion_timeout(&htc->ctl_resp,
+					     ATH10K_HTC_CONN_SVC_TIMEOUT_HZ);
+	if (status <= 0) {
+		if (status == 0)
+			status = -ETIMEDOUT;
+		ath10k_err("Service connect timeout: %d\n", status);
+		return status;
+	}
+
+	/* we controlled the buffer creation, it's aligned */
+	msg = (struct ath10k_htc_msg *)htc->control_resp_buffer;
+	resp_msg = &msg->connect_service_response;
+	message_id = __le16_to_cpu(msg->hdr.message_id);
+	service_id = __le16_to_cpu(resp_msg->service_id);
+
+	if ((message_id != ATH10K_HTC_MSG_CONNECT_SERVICE_RESP_ID) ||
+	    (htc->control_resp_len < sizeof(msg->hdr) +
+	     sizeof(msg->connect_service_response))) {
+		ath10k_err("Invalid resp message ID 0x%x", message_id);
+		return -EPROTO;
+	}
+
+	ath10k_dbg(ATH10K_DBG_HTC,
+		   "HTC Service %s connect response: status: 0x%x, assigned ep: 0x%x\n",
+		   htc_service_name(service_id),
+		   resp_msg->status, resp_msg->eid);
+
+	conn_resp->connect_resp_code = resp_msg->status;
+
+	/* check response status */
+	if (resp_msg->status != ATH10K_HTC_CONN_SVC_STATUS_SUCCESS) {
+		ath10k_err("HTC Service %s connect request failed: 0x%x)\n",
+			   htc_service_name(service_id),
+			   resp_msg->status);
+		return -EPROTO;
+	}
+
+	assigned_eid = (enum ath10k_htc_ep_id)resp_msg->eid;
+	max_msg_size = __le16_to_cpu(resp_msg->max_msg_size);
+
+setup:
+
+	if (assigned_eid >= ATH10K_HTC_EP_COUNT)
+		return -EPROTO;
+
+	if (max_msg_size == 0)
+		return -EPROTO;
+
+	ep = &htc->endpoint[assigned_eid];
+	ep->eid = assigned_eid;
+
+	if (ep->service_id != ATH10K_HTC_SVC_ID_UNUSED)
+		return -EPROTO;
+
+	/* return assigned endpoint to caller */
+	conn_resp->eid = assigned_eid;
+	conn_resp->max_msg_len = __le16_to_cpu(resp_msg->max_msg_size);
+
+	/* setup the endpoint */
+	ep->service_id = conn_req->service_id;
+	ep->max_tx_queue_depth = conn_req->max_send_queue_depth;
+	ep->max_ep_message_len = __le16_to_cpu(resp_msg->max_msg_size);
+	ep->tx_credits = tx_alloc;
+	ep->tx_credit_size = htc->target_credit_size;
+	ep->tx_credits_per_max_message = ep->max_ep_message_len /
+					 htc->target_credit_size;
+
+	if (ep->max_ep_message_len % htc->target_credit_size)
+		ep->tx_credits_per_max_message++;
+
+	/* copy all the callbacks */
+	ep->ep_ops = conn_req->ep_ops;
+
+	status = ath10k_hif_map_service_to_pipe(htc->ar,
+						ep->service_id,
+						&ep->ul_pipe_id,
+						&ep->dl_pipe_id,
+						&ep->ul_is_polled,
+						&ep->dl_is_polled);
+	if (status)
+		return status;
+
+	ath10k_dbg(ATH10K_DBG_HTC,
+		   "HTC service: %s UL pipe: %d DL pipe: %d eid: %d ready\n",
+		   htc_service_name(ep->service_id), ep->ul_pipe_id,
+		   ep->dl_pipe_id, ep->eid);
+
+	ath10k_dbg(ATH10K_DBG_HTC,
+		   "EP %d UL polled: %d, DL polled: %d\n",
+		   ep->eid, ep->ul_is_polled, ep->dl_is_polled);
+
+	if (disable_credit_flow_ctrl && ep->tx_credit_flow_enabled) {
+		ep->tx_credit_flow_enabled = false;
+		ath10k_dbg(ATH10K_DBG_HTC,
+			   "HTC service: %s eid: %d TX flow control disabled\n",
+			   htc_service_name(ep->service_id), assigned_eid);
+	}
+
+	return status;
+}
+
+struct sk_buff *ath10k_htc_alloc_skb(int size)
+{
+	struct sk_buff *skb;
+
+	skb = dev_alloc_skb(size + sizeof(struct ath10k_htc_hdr));
+	if (!skb) {
+		ath10k_warn("could not allocate HTC tx skb\n");
+		return NULL;
+	}
+
+	skb_reserve(skb, sizeof(struct ath10k_htc_hdr));
+
+	/* FW/HTC requires 4-byte aligned streams */
+	if (!IS_ALIGNED((unsigned long)skb->data, 4))
+		ath10k_warn("Unaligned HTC tx skb\n");
+
+	return skb;
+}
+
+int ath10k_htc_start(struct ath10k_htc *htc)
+{
+	struct sk_buff *skb;
+	int status = 0;
+	struct ath10k_htc_msg *msg;
+
+	skb = ath10k_htc_build_tx_ctrl_skb(htc->ar);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put(skb, sizeof(msg->hdr) + sizeof(msg->setup_complete_ext));
+	memset(skb->data, 0, skb->len);
+
+	msg = (struct ath10k_htc_msg *)skb->data;
+	msg->hdr.message_id =
+		__cpu_to_le16(ATH10K_HTC_MSG_SETUP_COMPLETE_EX_ID);
+
+	ath10k_dbg(ATH10K_DBG_HTC, "HTC is using TX credit flow control\n");
+
+	status = ath10k_htc_send(htc, ATH10K_HTC_EP_0, skb);
+	if (status) {
+		kfree_skb(skb);
+		return status;
+	}
+
+	return 0;
+}
+
+/*
+ * stop HTC communications, i.e. stop interrupt reception, and flush all
+ * queued buffers
+ */
+void ath10k_htc_stop(struct ath10k_htc *htc)
+{
+	int i;
+	struct ath10k_htc_ep *ep;
+
+	spin_lock_bh(&htc->tx_lock);
+	htc->stopping = true;
+	spin_unlock_bh(&htc->tx_lock);
+
+	for (i = ATH10K_HTC_EP_0; i < ATH10K_HTC_EP_COUNT; i++) {
+		ep = &htc->endpoint[i];
+		ath10k_htc_flush_endpoint_tx(htc, ep);
+	}
+
+	ath10k_hif_stop(htc->ar);
+	ath10k_htc_reset_endpoint_states(htc);
+}
+
+/* registered target arrival callback from the HIF layer */
+struct ath10k_htc *ath10k_htc_create(struct ath10k *ar,
+				     struct ath10k_htc_ops *htc_ops)
+{
+	struct ath10k_hif_cb htc_callbacks;
+	struct ath10k_htc_ep *ep = NULL;
+	struct ath10k_htc *htc = NULL;
+
+	/* FIXME: use struct ath10k instead */
+	htc = kzalloc(sizeof(struct ath10k_htc), GFP_KERNEL);
+	if (!htc)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_init(&htc->tx_lock);
+
+	memcpy(&htc->htc_ops, htc_ops, sizeof(struct ath10k_htc_ops));
+
+	ath10k_htc_reset_endpoint_states(htc);
+
+	/* setup HIF layer callbacks */
+	htc_callbacks.rx_completion = ath10k_htc_rx_completion_handler;
+	htc_callbacks.tx_completion = ath10k_htc_tx_completion_handler;
+	htc->ar = ar;
+
+	/* Get HIF default pipe for HTC message exchange */
+	ep = &htc->endpoint[ATH10K_HTC_EP_0];
+
+	ath10k_hif_init(ar, &htc_callbacks);
+	ath10k_hif_get_default_pipe(ar, &ep->ul_pipe_id, &ep->dl_pipe_id);
+
+	init_completion(&htc->ctl_resp);
+
+	return htc;
+}
+
+void ath10k_htc_destroy(struct ath10k_htc *htc)
+{
+	kfree(htc);
+}
diff --git a/drivers/net/wireless/ath/ath10k/htc.h b/drivers/net/wireless/ath/ath10k/htc.h
new file mode 100644
index 000000000000..fa45844b59fb
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/htc.h
@@ -0,0 +1,368 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _HTC_H_
+#define _HTC_H_
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/bug.h>
+#include <linux/skbuff.h>
+#include <linux/semaphore.h>
+#include <linux/timer.h>
+
+struct ath10k;
+
+/****************/
+/* HTC protocol */
+/****************/
+
+/*
+ * HTC - host-target control protocol
+ *
+ * tx packets are generally <htc_hdr><payload>
+ * rx packets are more complex: <htc_hdr><payload><trailer>
+ *
+ * The payload + trailer length is stored in len.
+ * To get payload-only length one needs to payload - trailer_len.
+ *
+ * Trailer contains (possibly) multiple <htc_record>.
+ * Each record is a id-len-value.
+ *
+ * HTC header flags, control_byte0, control_byte1
+ * have different meaning depending whether its tx
+ * or rx.
+ *
+ * Alignment: htc_hdr, payload and trailer are
+ * 4-byte aligned.
+ */
+
+enum ath10k_htc_tx_flags {
+	ATH10K_HTC_FLAG_NEED_CREDIT_UPDATE = 0x01,
+	ATH10K_HTC_FLAG_SEND_BUNDLE        = 0x02
+};
+
+enum ath10k_htc_rx_flags {
+	ATH10K_HTC_FLAG_TRAILER_PRESENT = 0x02,
+	ATH10K_HTC_FLAG_BUNDLE_MASK     = 0xF0
+};
+
+struct ath10k_htc_hdr {
+	u8 eid; /* @enum ath10k_htc_ep_id */
+	u8 flags; /* @enum ath10k_htc_tx_flags, ath10k_htc_rx_flags */
+	__le16 len;
+	union {
+		u8 trailer_len; /* for rx */
+		u8 control_byte0;
+	} __packed;
+	union {
+		u8 seq_no; /* for tx */
+		u8 control_byte1;
+	} __packed;
+	u8 pad0;
+	u8 pad1;
+} __packed __aligned(4);
+
+enum ath10k_ath10k_htc_msg_id {
+	ATH10K_HTC_MSG_READY_ID                = 1,
+	ATH10K_HTC_MSG_CONNECT_SERVICE_ID      = 2,
+	ATH10K_HTC_MSG_CONNECT_SERVICE_RESP_ID = 3,
+	ATH10K_HTC_MSG_SETUP_COMPLETE_ID       = 4,
+	ATH10K_HTC_MSG_SETUP_COMPLETE_EX_ID    = 5,
+	ATH10K_HTC_MSG_SEND_SUSPEND_COMPLETE   = 6
+};
+
+enum ath10k_htc_version {
+	ATH10K_HTC_VERSION_2P0 = 0x00, /* 2.0 */
+	ATH10K_HTC_VERSION_2P1 = 0x01, /* 2.1 */
+};
+
+enum ath10k_htc_conn_flags {
+	ATH10K_HTC_CONN_FLAGS_THRESHOLD_LEVEL_ONE_FOURTH    = 0x0,
+	ATH10K_HTC_CONN_FLAGS_THRESHOLD_LEVEL_ONE_HALF      = 0x1,
+	ATH10K_HTC_CONN_FLAGS_THRESHOLD_LEVEL_THREE_FOURTHS = 0x2,
+	ATH10K_HTC_CONN_FLAGS_THRESHOLD_LEVEL_UNITY         = 0x3,
+#define ATH10K_HTC_CONN_FLAGS_THRESHOLD_LEVEL_MASK 0x3
+	ATH10K_HTC_CONN_FLAGS_REDUCE_CREDIT_DRIBBLE    = 1 << 2,
+	ATH10K_HTC_CONN_FLAGS_DISABLE_CREDIT_FLOW_CTRL = 1 << 3
+#define ATH10K_HTC_CONN_FLAGS_RECV_ALLOC_MASK 0xFF00
+#define ATH10K_HTC_CONN_FLAGS_RECV_ALLOC_LSB  8
+};
+
+enum ath10k_htc_conn_svc_status {
+	ATH10K_HTC_CONN_SVC_STATUS_SUCCESS      = 0,
+	ATH10K_HTC_CONN_SVC_STATUS_NOT_FOUND    = 1,
+	ATH10K_HTC_CONN_SVC_STATUS_FAILED       = 2,
+	ATH10K_HTC_CONN_SVC_STATUS_NO_RESOURCES = 3,
+	ATH10K_HTC_CONN_SVC_STATUS_NO_MORE_EP   = 4
+};
+
+struct ath10k_ath10k_htc_msg_hdr {
+	__le16 message_id; /* @enum htc_message_id */
+} __packed;
+
+struct ath10k_htc_unknown {
+	u8 pad0;
+	u8 pad1;
+} __packed;
+
+struct ath10k_htc_ready {
+	__le16 credit_count;
+	__le16 credit_size;
+	u8 max_endpoints;
+	u8 pad0;
+} __packed;
+
+struct ath10k_htc_ready_extended {
+	struct ath10k_htc_ready base;
+	u8 htc_version; /* @enum ath10k_htc_version */
+	u8 max_msgs_per_htc_bundle;
+	u8 pad0;
+	u8 pad1;
+} __packed;
+
+struct ath10k_htc_conn_svc {
+	__le16 service_id;
+	__le16 flags; /* @enum ath10k_htc_conn_flags */
+	u8 pad0;
+	u8 pad1;
+} __packed;
+
+struct ath10k_htc_conn_svc_response {
+	__le16 service_id;
+	u8 status; /* @enum ath10k_htc_conn_svc_status */
+	u8 eid;
+	__le16 max_msg_size;
+} __packed;
+
+struct ath10k_htc_setup_complete_extended {
+	u8 pad0;
+	u8 pad1;
+	__le32 flags; /* @enum htc_setup_complete_flags */
+	u8 max_msgs_per_bundled_recv;
+	u8 pad2;
+	u8 pad3;
+	u8 pad4;
+} __packed;
+
+struct ath10k_htc_msg {
+	struct ath10k_ath10k_htc_msg_hdr hdr;
+	union {
+		/* host-to-target */
+		struct ath10k_htc_conn_svc connect_service;
+		struct ath10k_htc_ready ready;
+		struct ath10k_htc_ready_extended ready_ext;
+		struct ath10k_htc_unknown unknown;
+		struct ath10k_htc_setup_complete_extended setup_complete_ext;
+
+		/* target-to-host */
+		struct ath10k_htc_conn_svc_response connect_service_response;
+	};
+} __packed __aligned(4);
+
+enum ath10k_ath10k_htc_record_id {
+	ATH10K_HTC_RECORD_NULL    = 0,
+	ATH10K_HTC_RECORD_CREDITS = 1
+};
+
+struct ath10k_ath10k_htc_record_hdr {
+	u8 id; /* @enum ath10k_ath10k_htc_record_id */
+	u8 len;
+	u8 pad0;
+	u8 pad1;
+} __packed;
+
+struct ath10k_htc_credit_report {
+	u8 eid; /* @enum ath10k_htc_ep_id */
+	u8 credits;
+	u8 pad0;
+	u8 pad1;
+} __packed;
+
+struct ath10k_htc_record {
+	struct ath10k_ath10k_htc_record_hdr hdr;
+	union {
+		struct ath10k_htc_credit_report credit_report[0];
+		u8 pauload[0];
+	};
+} __packed __aligned(4);
+
+/*
+ * note: the trailer offset is dynamic depending
+ * on payload length. this is only a struct layout draft
+ */
+struct ath10k_htc_frame {
+	struct ath10k_htc_hdr hdr;
+	union {
+		struct ath10k_htc_msg msg;
+		u8 payload[0];
+	};
+	struct ath10k_htc_record trailer[0];
+} __packed __aligned(4);
+
+
+/*******************/
+/* Host-side stuff */
+/*******************/
+
+enum ath10k_htc_svc_gid {
+	ATH10K_HTC_SVC_GRP_RSVD = 0,
+	ATH10K_HTC_SVC_GRP_WMI = 1,
+	ATH10K_HTC_SVC_GRP_NMI = 2,
+	ATH10K_HTC_SVC_GRP_HTT = 3,
+
+	ATH10K_HTC_SVC_GRP_TEST = 254,
+	ATH10K_HTC_SVC_GRP_LAST = 255,
+};
+
+#define SVC(group, idx) \
+	(int)(((int)(group) << 8) | (int)(idx))
+
+enum ath10k_htc_svc_id {
+	/* NOTE: service ID of 0x0000 is reserved and should never be used */
+	ATH10K_HTC_SVC_ID_RESERVED	= 0x0000,
+	ATH10K_HTC_SVC_ID_UNUSED	= ATH10K_HTC_SVC_ID_RESERVED,
+
+	ATH10K_HTC_SVC_ID_RSVD_CTRL	= SVC(ATH10K_HTC_SVC_GRP_RSVD, 1),
+	ATH10K_HTC_SVC_ID_WMI_CONTROL	= SVC(ATH10K_HTC_SVC_GRP_WMI, 0),
+	ATH10K_HTC_SVC_ID_WMI_DATA_BE	= SVC(ATH10K_HTC_SVC_GRP_WMI, 1),
+	ATH10K_HTC_SVC_ID_WMI_DATA_BK	= SVC(ATH10K_HTC_SVC_GRP_WMI, 2),
+	ATH10K_HTC_SVC_ID_WMI_DATA_VI	= SVC(ATH10K_HTC_SVC_GRP_WMI, 3),
+	ATH10K_HTC_SVC_ID_WMI_DATA_VO	= SVC(ATH10K_HTC_SVC_GRP_WMI, 4),
+
+	ATH10K_HTC_SVC_ID_NMI_CONTROL	= SVC(ATH10K_HTC_SVC_GRP_NMI, 0),
+	ATH10K_HTC_SVC_ID_NMI_DATA	= SVC(ATH10K_HTC_SVC_GRP_NMI, 1),
+
+	ATH10K_HTC_SVC_ID_HTT_DATA_MSG	= SVC(ATH10K_HTC_SVC_GRP_HTT, 0),
+
+	/* raw stream service (i.e. flash, tcmd, calibration apps) */
+	ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS = SVC(ATH10K_HTC_SVC_GRP_TEST, 0),
+};
+
+#undef SVC
+
+enum ath10k_htc_ep_id {
+	ATH10K_HTC_EP_UNUSED = -1,
+	ATH10K_HTC_EP_0 = 0,
+	ATH10K_HTC_EP_1 = 1,
+	ATH10K_HTC_EP_2,
+	ATH10K_HTC_EP_3,
+	ATH10K_HTC_EP_4,
+	ATH10K_HTC_EP_5,
+	ATH10K_HTC_EP_6,
+	ATH10K_HTC_EP_7,
+	ATH10K_HTC_EP_8,
+	ATH10K_HTC_EP_COUNT,
+};
+
+struct ath10k_htc_ops {
+	void (*target_send_suspend_complete)(struct ath10k *ar);
+};
+
+struct ath10k_htc_ep_ops {
+	void (*ep_tx_complete)(struct ath10k *, struct sk_buff *);
+	void (*ep_rx_complete)(struct ath10k *, struct sk_buff *);
+};
+
+/* service connection information */
+struct ath10k_htc_svc_conn_req {
+	u16 service_id;
+	struct ath10k_htc_ep_ops ep_ops;
+	int max_send_queue_depth;
+};
+
+/* service connection response information */
+struct ath10k_htc_svc_conn_resp {
+	u8 buffer_len;
+	u8 actual_len;
+	enum ath10k_htc_ep_id eid;
+	unsigned int max_msg_len;
+	u8 connect_resp_code;
+};
+
+#define ATH10K_NUM_CONTROL_TX_BUFFERS 2
+#define ATH10K_HTC_MAX_LEN 4096
+#define ATH10K_HTC_MAX_CTRL_MSG_LEN 256
+#define ATH10K_HTC_WAIT_TIMEOUT_HZ (1*HZ)
+#define ATH10K_HTC_CONTROL_BUFFER_SIZE (ATH10K_HTC_MAX_CTRL_MSG_LEN + \
+					sizeof(struct ath10k_htc_hdr))
+#define ATH10K_HTC_CONN_SVC_TIMEOUT_HZ (1*HZ)
+
+struct ath10k_htc_ep {
+	struct ath10k_htc *htc;
+	enum ath10k_htc_ep_id eid;
+	enum ath10k_htc_svc_id service_id;
+	struct ath10k_htc_ep_ops ep_ops;
+
+	int max_tx_queue_depth;
+	int max_ep_message_len;
+	u8 ul_pipe_id;
+	u8 dl_pipe_id;
+	int ul_is_polled; /* call HIF to get tx completions */
+	int dl_is_polled; /* call HIF to fetch rx (not implemented) */
+
+	struct sk_buff_head tx_queue;
+
+	u8 seq_no; /* for debugging */
+	int tx_credits;
+	int tx_credit_size;
+	int tx_credits_per_max_message;
+	bool tx_credit_flow_enabled;
+
+	struct work_struct send_work;
+};
+
+struct ath10k_htc_svc_tx_credits {
+	u16 service_id;
+	u8  credit_allocation;
+};
+
+struct ath10k_htc {
+	struct ath10k *ar;
+	struct ath10k_htc_ep endpoint[ATH10K_HTC_EP_COUNT];
+
+	/* protects endpoint and stopping fields */
+	spinlock_t tx_lock;
+
+	struct ath10k_htc_ops htc_ops;
+
+	u8 control_resp_buffer[ATH10K_HTC_MAX_CTRL_MSG_LEN];
+	int control_resp_len;
+
+	struct completion ctl_resp;
+
+	int total_transmit_credits;
+	struct ath10k_htc_svc_tx_credits service_tx_alloc[ATH10K_HTC_EP_COUNT];
+	int target_credit_size;
+
+	bool stopping;
+};
+
+struct ath10k_htc *ath10k_htc_create(struct ath10k *ar,
+				     struct ath10k_htc_ops *htc_ops);
+int ath10k_htc_wait_target(struct ath10k_htc *htc);
+int ath10k_htc_start(struct ath10k_htc *htc);
+int ath10k_htc_connect_service(struct ath10k_htc *htc,
+			       struct ath10k_htc_svc_conn_req  *conn_req,
+			       struct ath10k_htc_svc_conn_resp *conn_resp);
+int ath10k_htc_send(struct ath10k_htc *htc, enum ath10k_htc_ep_id eid,
+		    struct sk_buff *packet);
+void ath10k_htc_stop(struct ath10k_htc *htc);
+void ath10k_htc_destroy(struct ath10k_htc *htc);
+struct sk_buff *ath10k_htc_alloc_skb(int size);
+
+#endif
diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c
new file mode 100644
index 000000000000..185a5468a2f2
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/htt.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/slab.h>
+
+#include "htt.h"
+#include "core.h"
+#include "debug.h"
+
+static int ath10k_htt_htc_attach(struct ath10k_htt *htt)
+{
+	struct ath10k_htc_svc_conn_req conn_req;
+	struct ath10k_htc_svc_conn_resp conn_resp;
+	int status;
+
+	memset(&conn_req, 0, sizeof(conn_req));
+	memset(&conn_resp, 0, sizeof(conn_resp));
+
+	conn_req.ep_ops.ep_tx_complete = ath10k_htt_htc_tx_complete;
+	conn_req.ep_ops.ep_rx_complete = ath10k_htt_t2h_msg_handler;
+
+	/* connect to control service */
+	conn_req.service_id = ATH10K_HTC_SVC_ID_HTT_DATA_MSG;
+
+	status = ath10k_htc_connect_service(htt->ar->htc, &conn_req,
+					    &conn_resp);
+
+	if (status)
+		return status;
+
+	htt->eid = conn_resp.eid;
+
+	return 0;
+}
+
+struct ath10k_htt *ath10k_htt_attach(struct ath10k *ar)
+{
+	struct ath10k_htt *htt;
+	int ret;
+
+	htt = kzalloc(sizeof(*htt), GFP_KERNEL);
+	if (!htt)
+		return NULL;
+
+	htt->ar = ar;
+	htt->max_throughput_mbps = 800;
+
+	/*
+	 * Connect to HTC service.
+	 * This has to be done before calling ath10k_htt_rx_attach,
+	 * since ath10k_htt_rx_attach involves sending a rx ring configure
+	 * message to the target.
+	 */
+	if (ath10k_htt_htc_attach(htt))
+		goto err_htc_attach;
+
+	ret = ath10k_htt_tx_attach(htt);
+	if (ret) {
+		ath10k_err("could not attach htt tx (%d)\n", ret);
+		goto err_htc_attach;
+	}
+
+	if (ath10k_htt_rx_attach(htt))
+		goto err_rx_attach;
+
+	/*
+	 * Prefetch enough data to satisfy target
+	 * classification engine.
+	 * This is for LL chips. HL chips will probably
+	 * transfer all frame in the tx fragment.
+	 */
+	htt->prefetch_len =
+		36 + /* 802.11 + qos + ht */
+		4 + /* 802.1q */
+		8 + /* llc snap */
+		2; /* ip4 dscp or ip6 priority */
+
+	return htt;
+
+err_rx_attach:
+	ath10k_htt_tx_detach(htt);
+err_htc_attach:
+	kfree(htt);
+	return NULL;
+}
+
+#define HTT_TARGET_VERSION_TIMEOUT_HZ (3*HZ)
+
+static int ath10k_htt_verify_version(struct ath10k_htt *htt)
+{
+	ath10k_dbg(ATH10K_DBG_HTT,
+		   "htt target version %d.%d; host version %d.%d\n",
+		    htt->target_version_major,
+		    htt->target_version_minor,
+		    HTT_CURRENT_VERSION_MAJOR,
+		    HTT_CURRENT_VERSION_MINOR);
+
+	if (htt->target_version_major != HTT_CURRENT_VERSION_MAJOR) {
+		ath10k_err("htt major versions are incompatible!\n");
+		return -ENOTSUPP;
+	}
+
+	if (htt->target_version_minor != HTT_CURRENT_VERSION_MINOR)
+		ath10k_warn("htt minor version differ but still compatible\n");
+
+	return 0;
+}
+
+int ath10k_htt_attach_target(struct ath10k_htt *htt)
+{
+	int status;
+
+	init_completion(&htt->target_version_received);
+
+	status = ath10k_htt_h2t_ver_req_msg(htt);
+	if (status)
+		return status;
+
+	status = wait_for_completion_timeout(&htt->target_version_received,
+						HTT_TARGET_VERSION_TIMEOUT_HZ);
+	if (status <= 0) {
+		ath10k_warn("htt version request timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	status = ath10k_htt_verify_version(htt);
+	if (status)
+		return status;
+
+	return ath10k_htt_send_rx_ring_cfg_ll(htt);
+}
+
+void ath10k_htt_detach(struct ath10k_htt *htt)
+{
+	ath10k_htt_rx_detach(htt);
+	ath10k_htt_tx_detach(htt);
+	kfree(htt);
+}
diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
new file mode 100644
index 000000000000..a7a7aa040536
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -0,0 +1,1338 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _HTT_H_
+#define _HTT_H_
+
+#include <linux/bug.h>
+
+#include "core.h"
+#include "htc.h"
+#include "rx_desc.h"
+
+#define HTT_CURRENT_VERSION_MAJOR	2
+#define HTT_CURRENT_VERSION_MINOR	1
+
+enum htt_dbg_stats_type {
+	HTT_DBG_STATS_WAL_PDEV_TXRX = 1 << 0,
+	HTT_DBG_STATS_RX_REORDER    = 1 << 1,
+	HTT_DBG_STATS_RX_RATE_INFO  = 1 << 2,
+	HTT_DBG_STATS_TX_PPDU_LOG   = 1 << 3,
+	HTT_DBG_STATS_TX_RATE_INFO  = 1 << 4,
+	/* bits 5-23 currently reserved */
+
+	HTT_DBG_NUM_STATS /* keep this last */
+};
+
+enum htt_h2t_msg_type { /* host-to-target */
+	HTT_H2T_MSG_TYPE_VERSION_REQ        = 0,
+	HTT_H2T_MSG_TYPE_TX_FRM             = 1,
+	HTT_H2T_MSG_TYPE_RX_RING_CFG        = 2,
+	HTT_H2T_MSG_TYPE_STATS_REQ          = 3,
+	HTT_H2T_MSG_TYPE_SYNC               = 4,
+	HTT_H2T_MSG_TYPE_AGGR_CFG           = 5,
+	HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG = 6,
+	HTT_H2T_MSG_TYPE_MGMT_TX            = 7,
+
+	HTT_H2T_NUM_MSGS /* keep this last */
+};
+
+struct htt_cmd_hdr {
+	u8 msg_type;
+} __packed;
+
+struct htt_ver_req {
+	u8 pad[sizeof(u32) - sizeof(struct htt_cmd_hdr)];
+} __packed;
+
+/*
+ * HTT tx MSDU descriptor
+ *
+ * The HTT tx MSDU descriptor is created by the host HTT SW for each
+ * tx MSDU.  The HTT tx MSDU descriptor contains the information that
+ * the target firmware needs for the FW's tx processing, particularly
+ * for creating the HW msdu descriptor.
+ * The same HTT tx descriptor is used for HL and LL systems, though
+ * a few fields within the tx descriptor are used only by LL or
+ * only by HL.
+ * The HTT tx descriptor is defined in two manners: by a struct with
+ * bitfields, and by a series of [dword offset, bit mask, bit shift]
+ * definitions.
+ * The target should use the struct def, for simplicitly and clarity,
+ * but the host shall use the bit-mast + bit-shift defs, to be endian-
+ * neutral.  Specifically, the host shall use the get/set macros built
+ * around the mask + shift defs.
+ */
+struct htt_data_tx_desc_frag {
+	__le32 paddr;
+	__le32 len;
+} __packed;
+
+enum htt_data_tx_desc_flags0 {
+	HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT = 1 << 0,
+	HTT_DATA_TX_DESC_FLAGS0_NO_AGGR         = 1 << 1,
+	HTT_DATA_TX_DESC_FLAGS0_NO_ENCRYPT      = 1 << 2,
+	HTT_DATA_TX_DESC_FLAGS0_NO_CLASSIFY     = 1 << 3,
+	HTT_DATA_TX_DESC_FLAGS0_RSVD0           = 1 << 4
+#define HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE_MASK 0xE0
+#define HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE_LSB 5
+};
+
+enum htt_data_tx_desc_flags1 {
+#define HTT_DATA_TX_DESC_FLAGS1_VDEV_ID_BITS 6
+#define HTT_DATA_TX_DESC_FLAGS1_VDEV_ID_MASK 0x003F
+#define HTT_DATA_TX_DESC_FLAGS1_VDEV_ID_LSB  0
+#define HTT_DATA_TX_DESC_FLAGS1_EXT_TID_BITS 5
+#define HTT_DATA_TX_DESC_FLAGS1_EXT_TID_MASK 0x07C0
+#define HTT_DATA_TX_DESC_FLAGS1_EXT_TID_LSB  6
+	HTT_DATA_TX_DESC_FLAGS1_POSTPONED        = 1 << 11,
+	HTT_DATA_TX_DESC_FLAGS1_MORE_IN_BATCH    = 1 << 12,
+	HTT_DATA_TX_DESC_FLAGS1_CKSUM_L3_OFFLOAD = 1 << 13,
+	HTT_DATA_TX_DESC_FLAGS1_CKSUM_L4_OFFLOAD = 1 << 14,
+	HTT_DATA_TX_DESC_FLAGS1_RSVD1            = 1 << 15
+};
+
+enum htt_data_tx_ext_tid {
+	HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST = 16,
+	HTT_DATA_TX_EXT_TID_MGMT                = 17,
+	HTT_DATA_TX_EXT_TID_INVALID             = 31
+};
+
+#define HTT_INVALID_PEERID 0xFFFF
+
+/*
+ * htt_data_tx_desc - used for data tx path
+ *
+ * Note: vdev_id irrelevant for pkt_type == raw and no_classify == 1.
+ *       ext_tid: for qos-data frames (0-15), see %HTT_DATA_TX_EXT_TID_
+ *                for special kinds of tids
+ *       postponed: only for HL hosts. indicates if this is a resend
+ *                  (HL hosts manage queues on the host )
+ *       more_in_batch: only for HL hosts. indicates if more packets are
+ *                      pending. this allows target to wait and aggregate
+ */
+struct htt_data_tx_desc {
+	u8 flags0; /* %HTT_DATA_TX_DESC_FLAGS0_ */
+	__le16 flags1; /* %HTT_DATA_TX_DESC_FLAGS1_ */
+	__le16 len;
+	__le16 id;
+	__le32 frags_paddr;
+	__le32 peerid;
+	u8 prefetch[0]; /* start of frame, for FW classification engine */
+} __packed;
+
+enum htt_rx_ring_flags {
+	HTT_RX_RING_FLAGS_MAC80211_HDR = 1 << 0,
+	HTT_RX_RING_FLAGS_MSDU_PAYLOAD = 1 << 1,
+	HTT_RX_RING_FLAGS_PPDU_START   = 1 << 2,
+	HTT_RX_RING_FLAGS_PPDU_END     = 1 << 3,
+	HTT_RX_RING_FLAGS_MPDU_START   = 1 << 4,
+	HTT_RX_RING_FLAGS_MPDU_END     = 1 << 5,
+	HTT_RX_RING_FLAGS_MSDU_START   = 1 << 6,
+	HTT_RX_RING_FLAGS_MSDU_END     = 1 << 7,
+	HTT_RX_RING_FLAGS_RX_ATTENTION = 1 << 8,
+	HTT_RX_RING_FLAGS_FRAG_INFO    = 1 << 9,
+	HTT_RX_RING_FLAGS_UNICAST_RX   = 1 << 10,
+	HTT_RX_RING_FLAGS_MULTICAST_RX = 1 << 11,
+	HTT_RX_RING_FLAGS_CTRL_RX      = 1 << 12,
+	HTT_RX_RING_FLAGS_MGMT_RX      = 1 << 13,
+	HTT_RX_RING_FLAGS_NULL_RX      = 1 << 14,
+	HTT_RX_RING_FLAGS_PHY_DATA_RX  = 1 << 15
+};
+
+struct htt_rx_ring_setup_ring {
+	__le32 fw_idx_shadow_reg_paddr;
+	__le32 rx_ring_base_paddr;
+	__le16 rx_ring_len; /* in 4-byte words */
+	__le16 rx_ring_bufsize; /* rx skb size - in bytes */
+	__le16 flags; /* %HTT_RX_RING_FLAGS_ */
+	__le16 fw_idx_init_val;
+
+	/* the following offsets are in 4-byte units */
+	__le16 mac80211_hdr_offset;
+	__le16 msdu_payload_offset;
+	__le16 ppdu_start_offset;
+	__le16 ppdu_end_offset;
+	__le16 mpdu_start_offset;
+	__le16 mpdu_end_offset;
+	__le16 msdu_start_offset;
+	__le16 msdu_end_offset;
+	__le16 rx_attention_offset;
+	__le16 frag_info_offset;
+} __packed;
+
+struct htt_rx_ring_setup_hdr {
+	u8 num_rings; /* supported values: 1, 2 */
+	__le16 rsvd0;
+} __packed;
+
+struct htt_rx_ring_setup {
+	struct htt_rx_ring_setup_hdr hdr;
+	struct htt_rx_ring_setup_ring rings[0];
+} __packed;
+
+/*
+ * htt_stats_req - request target to send specified statistics
+ *
+ * @msg_type: hardcoded %HTT_H2T_MSG_TYPE_STATS_REQ
+ * @upload_types: see %htt_dbg_stats_type. this is 24bit field actually
+ *	so make sure its little-endian.
+ * @reset_types: see %htt_dbg_stats_type. this is 24bit field actually
+ *	so make sure its little-endian.
+ * @cfg_val: stat_type specific configuration
+ * @stat_type: see %htt_dbg_stats_type
+ * @cookie_lsb: used for confirmation message from target->host
+ * @cookie_msb: ditto as %cookie
+ */
+struct htt_stats_req {
+	u8 upload_types[3];
+	u8 rsvd0;
+	u8 reset_types[3];
+	struct {
+		u8 mpdu_bytes;
+		u8 mpdu_num_msdus;
+		u8 msdu_bytes;
+	} __packed;
+	u8 stat_type;
+	__le32 cookie_lsb;
+	__le32 cookie_msb;
+} __packed;
+
+#define HTT_STATS_REQ_CFG_STAT_TYPE_INVALID 0xff
+
+/*
+ * htt_oob_sync_req - request out-of-band sync
+ *
+ * The HTT SYNC tells the target to suspend processing of subsequent
+ * HTT host-to-target messages until some other target agent locally
+ * informs the target HTT FW that the current sync counter is equal to
+ * or greater than (in a modulo sense) the sync counter specified in
+ * the SYNC message.
+ *
+ * This allows other host-target components to synchronize their operation
+ * with HTT, e.g. to ensure that tx frames don't get transmitted until a
+ * security key has been downloaded to and activated by the target.
+ * In the absence of any explicit synchronization counter value
+ * specification, the target HTT FW will use zero as the default current
+ * sync value.
+ *
+ * The HTT target FW will suspend its host->target message processing as long
+ * as 0 < (in-band sync counter - out-of-band sync counter) & 0xff < 128.
+ */
+struct htt_oob_sync_req {
+	u8 sync_count;
+	__le16 rsvd0;
+} __packed;
+
+#define HTT_AGGR_CONF_MAX_NUM_AMSDU_SUBFRAMES_MASK 0x1F
+#define HTT_AGGR_CONF_MAX_NUM_AMSDU_SUBFRAMES_LSB  0
+
+struct htt_aggr_conf {
+	u8 max_num_ampdu_subframes;
+	union {
+		/* dont use bitfields; undefined behaviour */
+		u8 flags; /* see %HTT_AGGR_CONF_MAX_NUM_AMSDU_SUBFRAMES_ */
+		u8 max_num_amsdu_subframes:5;
+	} __packed;
+} __packed;
+
+#define HTT_MGMT_FRM_HDR_DOWNLOAD_LEN 32
+
+struct htt_mgmt_tx_desc {
+	u8 pad[sizeof(u32) - sizeof(struct htt_cmd_hdr)];
+	__le32 msdu_paddr;
+	__le32 desc_id;
+	__le32 len;
+	__le32 vdev_id;
+	u8 hdr[HTT_MGMT_FRM_HDR_DOWNLOAD_LEN];
+} __packed;
+
+enum htt_mgmt_tx_status {
+	HTT_MGMT_TX_STATUS_OK    = 0,
+	HTT_MGMT_TX_STATUS_RETRY = 1,
+	HTT_MGMT_TX_STATUS_DROP  = 2
+};
+
+/*=== target -> host messages ===============================================*/
+
+
+enum htt_t2h_msg_type {
+	HTT_T2H_MSG_TYPE_VERSION_CONF		= 0x0,
+	HTT_T2H_MSG_TYPE_RX_IND			= 0x1,
+	HTT_T2H_MSG_TYPE_RX_FLUSH		= 0x2,
+	HTT_T2H_MSG_TYPE_PEER_MAP		= 0x3,
+	HTT_T2H_MSG_TYPE_PEER_UNMAP		= 0x4,
+	HTT_T2H_MSG_TYPE_RX_ADDBA		= 0x5,
+	HTT_T2H_MSG_TYPE_RX_DELBA		= 0x6,
+	HTT_T2H_MSG_TYPE_TX_COMPL_IND		= 0x7,
+	HTT_T2H_MSG_TYPE_PKTLOG			= 0x8,
+	HTT_T2H_MSG_TYPE_STATS_CONF		= 0x9,
+	HTT_T2H_MSG_TYPE_RX_FRAG_IND		= 0xa,
+	HTT_T2H_MSG_TYPE_SEC_IND		= 0xb,
+	HTT_T2H_MSG_TYPE_RC_UPDATE_IND		= 0xc,
+	HTT_T2H_MSG_TYPE_TX_INSPECT_IND		= 0xd,
+	HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION	= 0xe,
+	HTT_T2H_MSG_TYPE_TEST,
+	/* keep this last */
+	HTT_T2H_NUM_MSGS
+};
+
+/*
+ * htt_resp_hdr - header for target-to-host messages
+ *
+ * msg_type: see htt_t2h_msg_type
+ */
+struct htt_resp_hdr {
+	u8 msg_type;
+} __packed;
+
+#define HTT_RESP_HDR_MSG_TYPE_OFFSET 0
+#define HTT_RESP_HDR_MSG_TYPE_MASK   0xff
+#define HTT_RESP_HDR_MSG_TYPE_LSB    0
+
+/* htt_ver_resp - response sent for htt_ver_req */
+struct htt_ver_resp {
+	u8 minor;
+	u8 major;
+	u8 rsvd0;
+} __packed;
+
+struct htt_mgmt_tx_completion {
+	u8 rsvd0;
+	u8 rsvd1;
+	u8 rsvd2;
+	__le32 desc_id;
+	__le32 status;
+} __packed;
+
+#define HTT_RX_INDICATION_INFO0_EXT_TID_MASK  (0x3F)
+#define HTT_RX_INDICATION_INFO0_EXT_TID_LSB   (0)
+#define HTT_RX_INDICATION_INFO0_FLUSH_VALID   (1 << 6)
+#define HTT_RX_INDICATION_INFO0_RELEASE_VALID (1 << 7)
+
+#define HTT_RX_INDICATION_INFO1_FLUSH_START_SEQNO_MASK   0x0000003F
+#define HTT_RX_INDICATION_INFO1_FLUSH_START_SEQNO_LSB    0
+#define HTT_RX_INDICATION_INFO1_FLUSH_END_SEQNO_MASK     0x00000FC0
+#define HTT_RX_INDICATION_INFO1_FLUSH_END_SEQNO_LSB      6
+#define HTT_RX_INDICATION_INFO1_RELEASE_START_SEQNO_MASK 0x0003F000
+#define HTT_RX_INDICATION_INFO1_RELEASE_START_SEQNO_LSB  12
+#define HTT_RX_INDICATION_INFO1_RELEASE_END_SEQNO_MASK   0x00FC0000
+#define HTT_RX_INDICATION_INFO1_RELEASE_END_SEQNO_LSB    18
+#define HTT_RX_INDICATION_INFO1_NUM_MPDU_RANGES_MASK     0xFF000000
+#define HTT_RX_INDICATION_INFO1_NUM_MPDU_RANGES_LSB      24
+
+struct htt_rx_indication_hdr {
+	u8 info0; /* %HTT_RX_INDICATION_INFO0_ */
+	__le16 peer_id;
+	__le32 info1; /* %HTT_RX_INDICATION_INFO1_ */
+} __packed;
+
+#define HTT_RX_INDICATION_INFO0_PHY_ERR_VALID    (1 << 0)
+#define HTT_RX_INDICATION_INFO0_LEGACY_RATE_MASK (0x1E)
+#define HTT_RX_INDICATION_INFO0_LEGACY_RATE_LSB  (1)
+#define HTT_RX_INDICATION_INFO0_LEGACY_RATE_CCK  (1 << 5)
+#define HTT_RX_INDICATION_INFO0_END_VALID        (1 << 6)
+#define HTT_RX_INDICATION_INFO0_START_VALID      (1 << 7)
+
+#define HTT_RX_INDICATION_INFO1_VHT_SIG_A1_MASK    0x00FFFFFF
+#define HTT_RX_INDICATION_INFO1_VHT_SIG_A1_LSB     0
+#define HTT_RX_INDICATION_INFO1_PREAMBLE_TYPE_MASK 0xFF000000
+#define HTT_RX_INDICATION_INFO1_PREAMBLE_TYPE_LSB  24
+
+#define HTT_RX_INDICATION_INFO2_VHT_SIG_A1_MASK 0x00FFFFFF
+#define HTT_RX_INDICATION_INFO2_VHT_SIG_A1_LSB  0
+#define HTT_RX_INDICATION_INFO2_SERVICE_MASK    0xFF000000
+#define HTT_RX_INDICATION_INFO2_SERVICE_LSB     24
+
+enum htt_rx_legacy_rate {
+	HTT_RX_OFDM_48 = 0,
+	HTT_RX_OFDM_24 = 1,
+	HTT_RX_OFDM_12,
+	HTT_RX_OFDM_6,
+	HTT_RX_OFDM_54,
+	HTT_RX_OFDM_36,
+	HTT_RX_OFDM_18,
+	HTT_RX_OFDM_9,
+
+	/* long preamble */
+	HTT_RX_CCK_11_LP = 0,
+	HTT_RX_CCK_5_5_LP = 1,
+	HTT_RX_CCK_2_LP,
+	HTT_RX_CCK_1_LP,
+	/* short preamble */
+	HTT_RX_CCK_11_SP,
+	HTT_RX_CCK_5_5_SP,
+	HTT_RX_CCK_2_SP
+};
+
+enum htt_rx_legacy_rate_type {
+	HTT_RX_LEGACY_RATE_OFDM = 0,
+	HTT_RX_LEGACY_RATE_CCK
+};
+
+enum htt_rx_preamble_type {
+	HTT_RX_LEGACY        = 0x4,
+	HTT_RX_HT            = 0x8,
+	HTT_RX_HT_WITH_TXBF  = 0x9,
+	HTT_RX_VHT           = 0xC,
+	HTT_RX_VHT_WITH_TXBF = 0xD,
+};
+
+/*
+ * Fields: phy_err_valid, phy_err_code, tsf,
+ * usec_timestamp, sub_usec_timestamp
+ * ..are valid only if end_valid == 1.
+ *
+ * Fields: rssi_chains, legacy_rate_type,
+ * legacy_rate_cck, preamble_type, service,
+ * vht_sig_*
+ * ..are valid only if start_valid == 1;
+ */
+struct htt_rx_indication_ppdu {
+	u8 combined_rssi;
+	u8 sub_usec_timestamp;
+	u8 phy_err_code;
+	u8 info0; /* HTT_RX_INDICATION_INFO0_ */
+	struct {
+		u8 pri20_db;
+		u8 ext20_db;
+		u8 ext40_db;
+		u8 ext80_db;
+	} __packed rssi_chains[4];
+	__le32 tsf;
+	__le32 usec_timestamp;
+	__le32 info1; /* HTT_RX_INDICATION_INFO1_ */
+	__le32 info2; /* HTT_RX_INDICATION_INFO2_ */
+} __packed;
+
+enum htt_rx_mpdu_status {
+	HTT_RX_IND_MPDU_STATUS_UNKNOWN = 0x0,
+	HTT_RX_IND_MPDU_STATUS_OK,
+	HTT_RX_IND_MPDU_STATUS_ERR_FCS,
+	HTT_RX_IND_MPDU_STATUS_ERR_DUP,
+	HTT_RX_IND_MPDU_STATUS_ERR_REPLAY,
+	HTT_RX_IND_MPDU_STATUS_ERR_INV_PEER,
+	/* only accept EAPOL frames */
+	HTT_RX_IND_MPDU_STATUS_UNAUTH_PEER,
+	HTT_RX_IND_MPDU_STATUS_OUT_OF_SYNC,
+	/* Non-data in promiscous mode */
+	HTT_RX_IND_MPDU_STATUS_MGMT_CTRL,
+	HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR,
+	HTT_RX_IND_MPDU_STATUS_DECRYPT_ERR,
+	HTT_RX_IND_MPDU_STATUS_MPDU_LENGTH_ERR,
+	HTT_RX_IND_MPDU_STATUS_ENCRYPT_REQUIRED_ERR,
+	HTT_RX_IND_MPDU_STATUS_PRIVACY_ERR,
+
+	/*
+	 * MISC: discard for unspecified reasons.
+	 * Leave this enum value last.
+	 */
+	HTT_RX_IND_MPDU_STATUS_ERR_MISC = 0xFF
+};
+
+struct htt_rx_indication_mpdu_range {
+	u8 mpdu_count;
+	u8 mpdu_range_status; /* %htt_rx_mpdu_status */
+	u8 pad0;
+	u8 pad1;
+} __packed;
+
+struct htt_rx_indication_prefix {
+	__le16 fw_rx_desc_bytes;
+	u8 pad0;
+	u8 pad1;
+};
+
+struct htt_rx_indication {
+	struct htt_rx_indication_hdr hdr;
+	struct htt_rx_indication_ppdu ppdu;
+	struct htt_rx_indication_prefix prefix;
+
+	/*
+	 * the following fields are both dynamically sized, so
+	 * take care addressing them
+	 */
+
+	/* the size of this is %fw_rx_desc_bytes */
+	struct fw_rx_desc_base fw_desc;
+
+	/*
+	 * %mpdu_ranges starts after &%prefix + roundup(%fw_rx_desc_bytes, 4)
+	 * and has %num_mpdu_ranges elements.
+	 */
+	struct htt_rx_indication_mpdu_range mpdu_ranges[0];
+} __packed;
+
+static inline struct htt_rx_indication_mpdu_range *
+		htt_rx_ind_get_mpdu_ranges(struct htt_rx_indication *rx_ind)
+{
+	void *ptr = rx_ind;
+
+	ptr += sizeof(rx_ind->hdr)
+	     + sizeof(rx_ind->ppdu)
+	     + sizeof(rx_ind->prefix)
+	     + roundup(__le16_to_cpu(rx_ind->prefix.fw_rx_desc_bytes), 4);
+	return ptr;
+}
+
+enum htt_rx_flush_mpdu_status {
+	HTT_RX_FLUSH_MPDU_DISCARD = 0,
+	HTT_RX_FLUSH_MPDU_REORDER = 1,
+};
+
+/*
+ * htt_rx_flush - discard or reorder given range of mpdus
+ *
+ * Note: host must check if all sequence numbers between
+ *	[seq_num_start, seq_num_end-1] are valid.
+ */
+struct htt_rx_flush {
+	__le16 peer_id;
+	u8 tid;
+	u8 rsvd0;
+	u8 mpdu_status; /* %htt_rx_flush_mpdu_status */
+	u8 seq_num_start; /* it is 6 LSBs of 802.11 seq no */
+	u8 seq_num_end; /* it is 6 LSBs of 802.11 seq no */
+};
+
+struct htt_rx_peer_map {
+	u8 vdev_id;
+	__le16 peer_id;
+	u8 addr[6];
+	u8 rsvd0;
+	u8 rsvd1;
+} __packed;
+
+struct htt_rx_peer_unmap {
+	u8 rsvd0;
+	__le16 peer_id;
+} __packed;
+
+enum htt_security_types {
+	HTT_SECURITY_NONE,
+	HTT_SECURITY_WEP128,
+	HTT_SECURITY_WEP104,
+	HTT_SECURITY_WEP40,
+	HTT_SECURITY_TKIP,
+	HTT_SECURITY_TKIP_NOMIC,
+	HTT_SECURITY_AES_CCMP,
+	HTT_SECURITY_WAPI,
+
+	HTT_NUM_SECURITY_TYPES /* keep this last! */
+};
+
+enum htt_security_flags {
+#define HTT_SECURITY_TYPE_MASK 0x7F
+#define HTT_SECURITY_TYPE_LSB  0
+	HTT_SECURITY_IS_UNICAST = 1 << 7
+};
+
+struct htt_security_indication {
+	union {
+		/* dont use bitfields; undefined behaviour */
+		u8 flags; /* %htt_security_flags */
+		struct {
+			u8 security_type:7, /* %htt_security_types */
+			   is_unicast:1;
+		} __packed;
+	} __packed;
+	__le16 peer_id;
+	u8 michael_key[8];
+	u8 wapi_rsc[16];
+} __packed;
+
+#define HTT_RX_BA_INFO0_TID_MASK     0x000F
+#define HTT_RX_BA_INFO0_TID_LSB      0
+#define HTT_RX_BA_INFO0_PEER_ID_MASK 0xFFF0
+#define HTT_RX_BA_INFO0_PEER_ID_LSB  4
+
+struct htt_rx_addba {
+	u8 window_size;
+	__le16 info0; /* %HTT_RX_BA_INFO0_ */
+} __packed;
+
+struct htt_rx_delba {
+	u8 rsvd0;
+	__le16 info0; /* %HTT_RX_BA_INFO0_ */
+} __packed;
+
+enum htt_data_tx_status {
+	HTT_DATA_TX_STATUS_OK            = 0,
+	HTT_DATA_TX_STATUS_DISCARD       = 1,
+	HTT_DATA_TX_STATUS_NO_ACK        = 2,
+	HTT_DATA_TX_STATUS_POSTPONE      = 3, /* HL only */
+	HTT_DATA_TX_STATUS_DOWNLOAD_FAIL = 128
+};
+
+enum htt_data_tx_flags {
+#define HTT_DATA_TX_STATUS_MASK 0x07
+#define HTT_DATA_TX_STATUS_LSB  0
+#define HTT_DATA_TX_TID_MASK    0x78
+#define HTT_DATA_TX_TID_LSB     3
+	HTT_DATA_TX_TID_INVALID = 1 << 7
+};
+
+#define HTT_TX_COMPL_INV_MSDU_ID 0xFFFF
+
+struct htt_data_tx_completion {
+	union {
+		u8 flags;
+		struct {
+			u8 status:3,
+			   tid:4,
+			   tid_invalid:1;
+		} __packed;
+	} __packed;
+	u8 num_msdus;
+	u8 rsvd0;
+	__le16 msdus[0]; /* variable length based on %num_msdus */
+} __packed;
+
+struct htt_tx_compl_ind_base {
+	u32 hdr;
+	u16 payload[1/*or more*/];
+} __packed;
+
+struct htt_rc_tx_done_params {
+	u32 rate_code;
+	u32 rate_code_flags;
+	u32 flags;
+	u32 num_enqued; /* 1 for non-AMPDU */
+	u32 num_retries;
+	u32 num_failed; /* for AMPDU */
+	u32 ack_rssi;
+	u32 time_stamp;
+	u32 is_probe;
+};
+
+struct htt_rc_update {
+	u8 vdev_id;
+	__le16 peer_id;
+	u8 addr[6];
+	u8 num_elems;
+	u8 rsvd0;
+	struct htt_rc_tx_done_params params[0]; /* variable length %num_elems */
+} __packed;
+
+/* see htt_rx_indication for similar fields and descriptions */
+struct htt_rx_fragment_indication {
+	union {
+		u8 info0; /* %HTT_RX_FRAG_IND_INFO0_ */
+		struct {
+			u8 ext_tid:5,
+			   flush_valid:1;
+		} __packed;
+	} __packed;
+	__le16 peer_id;
+	__le32 info1; /* %HTT_RX_FRAG_IND_INFO1_ */
+	__le16 fw_rx_desc_bytes;
+	__le16 rsvd0;
+
+	u8 fw_msdu_rx_desc[0];
+} __packed;
+
+#define HTT_RX_FRAG_IND_INFO0_EXT_TID_MASK     0x1F
+#define HTT_RX_FRAG_IND_INFO0_EXT_TID_LSB      0
+#define HTT_RX_FRAG_IND_INFO0_FLUSH_VALID_MASK 0x20
+#define HTT_RX_FRAG_IND_INFO0_FLUSH_VALID_LSB  5
+
+#define HTT_RX_FRAG_IND_INFO1_FLUSH_SEQ_NUM_START_MASK 0x0000003F
+#define HTT_RX_FRAG_IND_INFO1_FLUSH_SEQ_NUM_START_LSB  0
+#define HTT_RX_FRAG_IND_INFO1_FLUSH_SEQ_NUM_END_MASK   0x00000FC0
+#define HTT_RX_FRAG_IND_INFO1_FLUSH_SEQ_NUM_END_LSB    6
+
+/*
+ * target -> host test message definition
+ *
+ * The following field definitions describe the format of the test
+ * message sent from the target to the host.
+ * The message consists of a 4-octet header, followed by a variable
+ * number of 32-bit integer values, followed by a variable number
+ * of 8-bit character values.
+ *
+ * |31                         16|15           8|7            0|
+ * |-----------------------------------------------------------|
+ * |          num chars          |   num ints   |   msg type   |
+ * |-----------------------------------------------------------|
+ * |                           int 0                           |
+ * |-----------------------------------------------------------|
+ * |                           int 1                           |
+ * |-----------------------------------------------------------|
+ * |                            ...                            |
+ * |-----------------------------------------------------------|
+ * |    char 3    |    char 2    |    char 1    |    char 0    |
+ * |-----------------------------------------------------------|
+ * |              |              |      ...     |    char 4    |
+ * |-----------------------------------------------------------|
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as a test message
+ *     Value: HTT_MSG_TYPE_TEST
+ *   - NUM_INTS
+ *     Bits 15:8
+ *     Purpose: indicate how many 32-bit integers follow the message header
+ *   - NUM_CHARS
+ *     Bits 31:16
+ *     Purpose: indicate how many 8-bit charaters follow the series of integers
+ */
+struct htt_rx_test {
+	u8 num_ints;
+	__le16 num_chars;
+
+	/* payload consists of 2 lists:
+	 *  a) num_ints * sizeof(__le32)
+	 *  b) num_chars * sizeof(u8) aligned to 4bytes */
+	u8 payload[0];
+} __packed;
+
+static inline __le32 *htt_rx_test_get_ints(struct htt_rx_test *rx_test)
+{
+	return (__le32 *)rx_test->payload;
+}
+
+static inline u8 *htt_rx_test_get_chars(struct htt_rx_test *rx_test)
+{
+	return rx_test->payload + (rx_test->num_ints * sizeof(__le32));
+}
+
+/*
+ * target -> host packet log message
+ *
+ * The following field definitions describe the format of the packet log
+ * message sent from the target to the host.
+ * The message consists of a 4-octet header,followed by a variable number
+ * of 32-bit character values.
+ *
+ * |31          24|23          16|15           8|7            0|
+ * |-----------------------------------------------------------|
+ * |              |              |              |   msg type   |
+ * |-----------------------------------------------------------|
+ * |                        payload                            |
+ * |-----------------------------------------------------------|
+ *   - MSG_TYPE
+ *     Bits 7:0
+ *     Purpose: identifies this as a test message
+ *     Value: HTT_MSG_TYPE_PACKETLOG
+ */
+struct htt_pktlog_msg {
+	u8 pad[3];
+	__le32 payload[1 /* or more */];
+} __packed;
+
+struct htt_dbg_stats_rx_reorder_stats {
+	/* Non QoS MPDUs received */
+	__le32 deliver_non_qos;
+
+	/* MPDUs received in-order */
+	__le32 deliver_in_order;
+
+	/* Flush due to reorder timer expired */
+	__le32 deliver_flush_timeout;
+
+	/* Flush due to move out of window */
+	__le32 deliver_flush_oow;
+
+	/* Flush due to DELBA */
+	__le32 deliver_flush_delba;
+
+	/* MPDUs dropped due to FCS error */
+	__le32 fcs_error;
+
+	/* MPDUs dropped due to monitor mode non-data packet */
+	__le32 mgmt_ctrl;
+
+	/* MPDUs dropped due to invalid peer */
+	__le32 invalid_peer;
+
+	/* MPDUs dropped due to duplication (non aggregation) */
+	__le32 dup_non_aggr;
+
+	/* MPDUs dropped due to processed before */
+	__le32 dup_past;
+
+	/* MPDUs dropped due to duplicate in reorder queue */
+	__le32 dup_in_reorder;
+
+	/* Reorder timeout happened */
+	__le32 reorder_timeout;
+
+	/* invalid bar ssn */
+	__le32 invalid_bar_ssn;
+
+	/* reorder reset due to bar ssn */
+	__le32 ssn_reset;
+};
+
+struct htt_dbg_stats_wal_tx_stats {
+	/* Num HTT cookies queued to dispatch list */
+	__le32 comp_queued;
+
+	/* Num HTT cookies dispatched */
+	__le32 comp_delivered;
+
+	/* Num MSDU queued to WAL */
+	__le32 msdu_enqued;
+
+	/* Num MPDU queue to WAL */
+	__le32 mpdu_enqued;
+
+	/* Num MSDUs dropped by WMM limit */
+	__le32 wmm_drop;
+
+	/* Num Local frames queued */
+	__le32 local_enqued;
+
+	/* Num Local frames done */
+	__le32 local_freed;
+
+	/* Num queued to HW */
+	__le32 hw_queued;
+
+	/* Num PPDU reaped from HW */
+	__le32 hw_reaped;
+
+	/* Num underruns */
+	__le32 underrun;
+
+	/* Num PPDUs cleaned up in TX abort */
+	__le32 tx_abort;
+
+	/* Num MPDUs requed by SW */
+	__le32 mpdus_requed;
+
+	/* excessive retries */
+	__le32 tx_ko;
+
+	/* data hw rate code */
+	__le32 data_rc;
+
+	/* Scheduler self triggers */
+	__le32 self_triggers;
+
+	/* frames dropped due to excessive sw retries */
+	__le32 sw_retry_failure;
+
+	/* illegal rate phy errors  */
+	__le32 illgl_rate_phy_err;
+
+	/* wal pdev continous xretry */
+	__le32 pdev_cont_xretry;
+
+	/* wal pdev continous xretry */
+	__le32 pdev_tx_timeout;
+
+	/* wal pdev resets  */
+	__le32 pdev_resets;
+
+	__le32 phy_underrun;
+
+	/* MPDU is more than txop limit */
+	__le32 txop_ovf;
+} __packed;
+
+struct htt_dbg_stats_wal_rx_stats {
+	/* Cnts any change in ring routing mid-ppdu */
+	__le32 mid_ppdu_route_change;
+
+	/* Total number of statuses processed */
+	__le32 status_rcvd;
+
+	/* Extra frags on rings 0-3 */
+	__le32 r0_frags;
+	__le32 r1_frags;
+	__le32 r2_frags;
+	__le32 r3_frags;
+
+	/* MSDUs / MPDUs delivered to HTT */
+	__le32 htt_msdus;
+	__le32 htt_mpdus;
+
+	/* MSDUs / MPDUs delivered to local stack */
+	__le32 loc_msdus;
+	__le32 loc_mpdus;
+
+	/* AMSDUs that have more MSDUs than the status ring size */
+	__le32 oversize_amsdu;
+
+	/* Number of PHY errors */
+	__le32 phy_errs;
+
+	/* Number of PHY errors drops */
+	__le32 phy_err_drop;
+
+	/* Number of mpdu errors - FCS, MIC, ENC etc. */
+	__le32 mpdu_errs;
+} __packed;
+
+struct htt_dbg_stats_wal_peer_stats {
+	__le32 dummy; /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
+} __packed;
+
+struct htt_dbg_stats_wal_pdev_txrx {
+	struct htt_dbg_stats_wal_tx_stats tx_stats;
+	struct htt_dbg_stats_wal_rx_stats rx_stats;
+	struct htt_dbg_stats_wal_peer_stats peer_stats;
+} __packed;
+
+struct htt_dbg_stats_rx_rate_info {
+	__le32 mcs[10];
+	__le32 sgi[10];
+	__le32 nss[4];
+	__le32 stbc[10];
+	__le32 bw[3];
+	__le32 pream[6];
+	__le32 ldpc;
+	__le32 txbf;
+};
+
+/*
+ * htt_dbg_stats_status -
+ * present -     The requested stats have been delivered in full.
+ *               This indicates that either the stats information was contained
+ *               in its entirety within this message, or else this message
+ *               completes the delivery of the requested stats info that was
+ *               partially delivered through earlier STATS_CONF messages.
+ * partial -     The requested stats have been delivered in part.
+ *               One or more subsequent STATS_CONF messages with the same
+ *               cookie value will be sent to deliver the remainder of the
+ *               information.
+ * error -       The requested stats could not be delivered, for example due
+ *               to a shortage of memory to construct a message holding the
+ *               requested stats.
+ * invalid -     The requested stat type is either not recognized, or the
+ *               target is configured to not gather the stats type in question.
+ * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+ * series_done - This special value indicates that no further stats info
+ *               elements are present within a series of stats info elems
+ *               (within a stats upload confirmation message).
+ */
+enum htt_dbg_stats_status {
+	HTT_DBG_STATS_STATUS_PRESENT     = 0,
+	HTT_DBG_STATS_STATUS_PARTIAL     = 1,
+	HTT_DBG_STATS_STATUS_ERROR       = 2,
+	HTT_DBG_STATS_STATUS_INVALID     = 3,
+	HTT_DBG_STATS_STATUS_SERIES_DONE = 7
+};
+
+/*
+ * target -> host statistics upload
+ *
+ * The following field definitions describe the format of the HTT target
+ * to host stats upload confirmation message.
+ * The message contains a cookie echoed from the HTT host->target stats
+ * upload request, which identifies which request the confirmation is
+ * for, and a series of tag-length-value stats information elements.
+ * The tag-length header for each stats info element also includes a
+ * status field, to indicate whether the request for the stat type in
+ * question was fully met, partially met, unable to be met, or invalid
+ * (if the stat type in question is disabled in the target).
+ * A special value of all 1's in this status field is used to indicate
+ * the end of the series of stats info elements.
+ *
+ *
+ * |31                         16|15           8|7   5|4       0|
+ * |------------------------------------------------------------|
+ * |                  reserved                  |    msg type   |
+ * |------------------------------------------------------------|
+ * |                        cookie LSBs                         |
+ * |------------------------------------------------------------|
+ * |                        cookie MSBs                         |
+ * |------------------------------------------------------------|
+ * |      stats entry length     |   reserved   |  S  |stat type|
+ * |------------------------------------------------------------|
+ * |                                                            |
+ * |                  type-specific stats info                  |
+ * |                                                            |
+ * |------------------------------------------------------------|
+ * |      stats entry length     |   reserved   |  S  |stat type|
+ * |------------------------------------------------------------|
+ * |                                                            |
+ * |                  type-specific stats info                  |
+ * |                                                            |
+ * |------------------------------------------------------------|
+ * |              n/a            |   reserved   | 111 |   n/a   |
+ * |------------------------------------------------------------|
+ * Header fields:
+ *  - MSG_TYPE
+ *    Bits 7:0
+ *    Purpose: identifies this is a statistics upload confirmation message
+ *    Value: 0x9
+ *  - COOKIE_LSBS
+ *    Bits 31:0
+ *    Purpose: Provide a mechanism to match a target->host stats confirmation
+ *        message with its preceding host->target stats request message.
+ *    Value: LSBs of the opaque cookie specified by the host-side requestor
+ *  - COOKIE_MSBS
+ *    Bits 31:0
+ *    Purpose: Provide a mechanism to match a target->host stats confirmation
+ *        message with its preceding host->target stats request message.
+ *    Value: MSBs of the opaque cookie specified by the host-side requestor
+ *
+ * Stats Information Element tag-length header fields:
+ *  - STAT_TYPE
+ *    Bits 4:0
+ *    Purpose: identifies the type of statistics info held in the
+ *        following information element
+ *    Value: htt_dbg_stats_type
+ *  - STATUS
+ *    Bits 7:5
+ *    Purpose: indicate whether the requested stats are present
+ *    Value: htt_dbg_stats_status, including a special value (0x7) to mark
+ *        the completion of the stats entry series
+ *  - LENGTH
+ *    Bits 31:16
+ *    Purpose: indicate the stats information size
+ *    Value: This field specifies the number of bytes of stats information
+ *       that follows the element tag-length header.
+ *       It is expected but not required that this length is a multiple of
+ *       4 bytes.  Even if the length is not an integer multiple of 4, the
+ *       subsequent stats entry header will begin on a 4-byte aligned
+ *       boundary.
+ */
+
+#define HTT_STATS_CONF_ITEM_INFO_STAT_TYPE_MASK 0x1F
+#define HTT_STATS_CONF_ITEM_INFO_STAT_TYPE_LSB  0
+#define HTT_STATS_CONF_ITEM_INFO_STATUS_MASK    0xE0
+#define HTT_STATS_CONF_ITEM_INFO_STATUS_LSB     5
+
+struct htt_stats_conf_item {
+	union {
+		u8 info;
+		struct {
+			u8 stat_type:5; /* %HTT_DBG_STATS_ */
+			u8 status:3; /* %HTT_DBG_STATS_STATUS_ */
+		} __packed;
+	} __packed;
+	u8 pad;
+	__le16 length;
+	u8 payload[0]; /* roundup(length, 4) long */
+} __packed;
+
+struct htt_stats_conf {
+	u8 pad[3];
+	__le32 cookie_lsb;
+	__le32 cookie_msb;
+
+	/* each item has variable length! */
+	struct htt_stats_conf_item items[0];
+} __packed;
+
+static inline struct htt_stats_conf_item *htt_stats_conf_next_item(
+					const struct htt_stats_conf_item *item)
+{
+	return (void *)item + sizeof(*item) + roundup(item->length, 4);
+}
+/*
+ * host -> target FRAG DESCRIPTOR/MSDU_EXT DESC bank
+ *
+ * The following field definitions describe the format of the HTT host
+ * to target frag_desc/msdu_ext bank configuration message.
+ * The message contains the based address and the min and max id of the
+ * MSDU_EXT/FRAG_DESC that will be used by the HTT to map MSDU DESC and
+ * MSDU_EXT/FRAG_DESC.
+ * HTT will use id in HTT descriptor instead sending the frag_desc_ptr.
+ * For QCA988X HW the firmware will use fragment_desc_ptr but in WIFI2.0
+ * the hardware does the mapping/translation.
+ *
+ * Total banks that can be configured is configured to 16.
+ *
+ * This should be called before any TX has be initiated by the HTT
+ *
+ * |31                         16|15           8|7   5|4       0|
+ * |------------------------------------------------------------|
+ * | DESC_SIZE    |  NUM_BANKS   | RES |SWP|pdev|    msg type   |
+ * |------------------------------------------------------------|
+ * |                     BANK0_BASE_ADDRESS                     |
+ * |------------------------------------------------------------|
+ * |                            ...                             |
+ * |------------------------------------------------------------|
+ * |                    BANK15_BASE_ADDRESS                     |
+ * |------------------------------------------------------------|
+ * |       BANK0_MAX_ID          |       BANK0_MIN_ID           |
+ * |------------------------------------------------------------|
+ * |                            ...                             |
+ * |------------------------------------------------------------|
+ * |       BANK15_MAX_ID         |       BANK15_MIN_ID          |
+ * |------------------------------------------------------------|
+ * Header fields:
+ *  - MSG_TYPE
+ *    Bits 7:0
+ *    Value: 0x6
+ *  - BANKx_BASE_ADDRESS
+ *    Bits 31:0
+ *    Purpose: Provide a mechanism to specify the base address of the MSDU_EXT
+ *         bank physical/bus address.
+ *  - BANKx_MIN_ID
+ *    Bits 15:0
+ *    Purpose: Provide a mechanism to specify the min index that needs to
+ *          mapped.
+ *  - BANKx_MAX_ID
+ *    Bits 31:16
+ *    Purpose: Provide a mechanism to specify the max index that needs to
+ *
+ */
+struct htt_frag_desc_bank_id {
+	__le16 bank_min_id;
+	__le16 bank_max_id;
+} __packed;
+
+/* real is 16 but it wouldn't fit in the max htt message size
+ * so we use a conservatively safe value for now */
+#define HTT_FRAG_DESC_BANK_MAX 4
+
+#define HTT_FRAG_DESC_BANK_CFG_INFO_PDEV_ID_MASK 0x03
+#define HTT_FRAG_DESC_BANK_CFG_INFO_PDEV_ID_LSB  0
+#define HTT_FRAG_DESC_BANK_CFG_INFO_SWAP         (1 << 2)
+
+struct htt_frag_desc_bank_cfg {
+	u8 info; /* HTT_FRAG_DESC_BANK_CFG_INFO_ */
+	u8 num_banks;
+	u8 desc_size;
+	__le32 bank_base_addrs[HTT_FRAG_DESC_BANK_MAX];
+	struct htt_frag_desc_bank_id bank_id[HTT_FRAG_DESC_BANK_MAX];
+} __packed;
+
+union htt_rx_pn_t {
+	/* WEP: 24-bit PN */
+	u32 pn24;
+
+	/* TKIP or CCMP: 48-bit PN */
+	u_int64_t pn48;
+
+	/* WAPI: 128-bit PN */
+	u_int64_t pn128[2];
+};
+
+struct htt_cmd {
+	struct htt_cmd_hdr hdr;
+	union {
+		struct htt_ver_req ver_req;
+		struct htt_mgmt_tx_desc mgmt_tx;
+		struct htt_data_tx_desc data_tx;
+		struct htt_rx_ring_setup rx_setup;
+		struct htt_stats_req stats_req;
+		struct htt_oob_sync_req oob_sync_req;
+		struct htt_aggr_conf aggr_conf;
+		struct htt_frag_desc_bank_cfg frag_desc_bank_cfg;
+	};
+} __packed;
+
+struct htt_resp {
+	struct htt_resp_hdr hdr;
+	union {
+		struct htt_ver_resp ver_resp;
+		struct htt_mgmt_tx_completion mgmt_tx_completion;
+		struct htt_data_tx_completion data_tx_completion;
+		struct htt_rx_indication rx_ind;
+		struct htt_rx_fragment_indication rx_frag_ind;
+		struct htt_rx_peer_map peer_map;
+		struct htt_rx_peer_unmap peer_unmap;
+		struct htt_rx_flush rx_flush;
+		struct htt_rx_addba rx_addba;
+		struct htt_rx_delba rx_delba;
+		struct htt_security_indication security_indication;
+		struct htt_rc_update rc_update;
+		struct htt_rx_test rx_test;
+		struct htt_pktlog_msg pktlog_msg;
+		struct htt_stats_conf stats_conf;
+	};
+} __packed;
+
+
+/*** host side structures follow ***/
+
+struct htt_tx_done {
+	u32 msdu_id;
+	bool discard;
+	bool no_ack;
+};
+
+struct htt_peer_map_event {
+	u8 vdev_id;
+	u16 peer_id;
+	u8 addr[ETH_ALEN];
+};
+
+struct htt_peer_unmap_event {
+	u16 peer_id;
+};
+
+struct htt_rx_info {
+	struct sk_buff *skb;
+	enum htt_rx_mpdu_status status;
+	enum htt_rx_mpdu_encrypt_type encrypt_type;
+	s8 signal;
+	struct {
+		u8 info0;
+		u32 info1;
+		u32 info2;
+	} rate;
+	bool fcs_err;
+};
+
+struct ath10k_htt {
+	struct ath10k *ar;
+	enum ath10k_htc_ep_id eid;
+
+	int max_throughput_mbps;
+	u8 target_version_major;
+	u8 target_version_minor;
+	struct completion target_version_received;
+
+	struct {
+		/*
+		 * Ring of network buffer objects - This ring is
+		 * used exclusively by the host SW. This ring
+		 * mirrors the dev_addrs_ring that is shared
+		 * between the host SW and the MAC HW. The host SW
+		 * uses this netbufs ring to locate the network
+		 * buffer objects whose data buffers the HW has
+		 * filled.
+		 */
+		struct sk_buff **netbufs_ring;
+		/*
+		 * Ring of buffer addresses -
+		 * This ring holds the "physical" device address of the
+		 * rx buffers the host SW provides for the MAC HW to
+		 * fill.
+		 */
+		__le32 *paddrs_ring;
+
+		/*
+		 * Base address of ring, as a "physical" device address
+		 * rather than a CPU address.
+		 */
+		dma_addr_t base_paddr;
+
+		/* how many elems in the ring (power of 2) */
+		int size;
+
+		/* size - 1 */
+		unsigned size_mask;
+
+		/* how many rx buffers to keep in the ring */
+		int fill_level;
+
+		/* how many rx buffers (full+empty) are in the ring */
+		int fill_cnt;
+
+		/*
+		 * alloc_idx - where HTT SW has deposited empty buffers
+		 * This is allocated in consistent mem, so that the FW can
+		 * read this variable, and program the HW's FW_IDX reg with
+		 * the value of this shadow register.
+		 */
+		struct {
+			__le32 *vaddr;
+			dma_addr_t paddr;
+		} alloc_idx;
+
+		/* where HTT SW has processed bufs filled by rx MAC DMA */
+		struct {
+			unsigned msdu_payld;
+		} sw_rd_idx;
+
+		/*
+		 * refill_retry_timer - timer triggered when the ring is
+		 * not refilled to the level expected
+		 */
+		struct timer_list refill_retry_timer;
+
+		/* Protects access to all rx ring buffer state variables */
+		spinlock_t lock;
+	} rx_ring;
+
+	unsigned int prefetch_len;
+
+	/* Protects access to %pending_tx, %used_msdu_ids */
+	spinlock_t tx_lock;
+	int max_num_pending_tx;
+	int num_pending_tx;
+	struct sk_buff **pending_tx;
+	unsigned long *used_msdu_ids; /* bitmap */
+	wait_queue_head_t empty_tx_wq;
+
+	/* set if host-fw communication goes haywire
+	 * used to avoid further failures */
+	bool rx_confused;
+};
+
+#define RX_HTT_HDR_STATUS_LEN 64
+
+/* This structure layout is programmed via rx ring setup
+ * so that FW knows how to transfer the rx descriptor to the host.
+ * Buffers like this are placed on the rx ring. */
+struct htt_rx_desc {
+	union {
+		/* This field is filled on the host using the msdu buffer
+		 * from htt_rx_indication */
+		struct fw_rx_desc_base fw_desc;
+		u32 pad;
+	} __packed;
+	struct {
+		struct rx_attention attention;
+		struct rx_frag_info frag_info;
+		struct rx_mpdu_start mpdu_start;
+		struct rx_msdu_start msdu_start;
+		struct rx_msdu_end msdu_end;
+		struct rx_mpdu_end mpdu_end;
+		struct rx_ppdu_start ppdu_start;
+		struct rx_ppdu_end ppdu_end;
+	} __packed;
+	u8 rx_hdr_status[RX_HTT_HDR_STATUS_LEN];
+	u8 msdu_payload[0];
+};
+
+#define HTT_RX_DESC_ALIGN 8
+
+#define HTT_MAC_ADDR_LEN 6
+
+/*
+ * FIX THIS
+ * Should be: sizeof(struct htt_host_rx_desc) + max rx MSDU size,
+ * rounded up to a cache line size.
+ */
+#define HTT_RX_BUF_SIZE 1920
+#define HTT_RX_MSDU_SIZE (HTT_RX_BUF_SIZE - (int)sizeof(struct htt_rx_desc))
+
+/*
+ * DMA_MAP expects the buffer to be an integral number of cache lines.
+ * Rather than checking the actual cache line size, this code makes a
+ * conservative estimate of what the cache line size could be.
+ */
+#define HTT_LOG2_MAX_CACHE_LINE_SIZE 7	/* 2^7 = 128 */
+#define HTT_MAX_CACHE_LINE_SIZE_MASK ((1 << HTT_LOG2_MAX_CACHE_LINE_SIZE) - 1)
+
+struct ath10k_htt *ath10k_htt_attach(struct ath10k *ar);
+int ath10k_htt_attach_target(struct ath10k_htt *htt);
+void ath10k_htt_detach(struct ath10k_htt *htt);
+
+int ath10k_htt_tx_attach(struct ath10k_htt *htt);
+void ath10k_htt_tx_detach(struct ath10k_htt *htt);
+int ath10k_htt_rx_attach(struct ath10k_htt *htt);
+void ath10k_htt_rx_detach(struct ath10k_htt *htt);
+void ath10k_htt_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb);
+int ath10k_htt_h2t_ver_req_msg(struct ath10k_htt *htt);
+int ath10k_htt_send_rx_ring_cfg_ll(struct ath10k_htt *htt);
+
+void __ath10k_htt_tx_dec_pending(struct ath10k_htt *htt);
+int ath10k_htt_tx_alloc_msdu_id(struct ath10k_htt *htt);
+void ath10k_htt_tx_free_msdu_id(struct ath10k_htt *htt, u16 msdu_id);
+int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *);
+int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *);
+#endif
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
new file mode 100644
index 000000000000..de058d7adca8
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -0,0 +1,1167 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "htc.h"
+#include "htt.h"
+#include "txrx.h"
+#include "debug.h"
+
+#include <linux/log2.h>
+
+/* slightly larger than one large A-MPDU */
+#define HTT_RX_RING_SIZE_MIN 128
+
+/* roughly 20 ms @ 1 Gbps of 1500B MSDUs */
+#define HTT_RX_RING_SIZE_MAX 2048
+
+#define HTT_RX_AVG_FRM_BYTES 1000
+
+/* ms, very conservative */
+#define HTT_RX_HOST_LATENCY_MAX_MS 20
+
+/* ms, conservative */
+#define HTT_RX_HOST_LATENCY_WORST_LIKELY_MS 10
+
+/* when under memory pressure rx ring refill may fail and needs a retry */
+#define HTT_RX_RING_REFILL_RETRY_MS 50
+
+static int ath10k_htt_rx_ring_size(struct ath10k_htt *htt)
+{
+	int size;
+
+	/*
+	 * It is expected that the host CPU will typically be able to
+	 * service the rx indication from one A-MPDU before the rx
+	 * indication from the subsequent A-MPDU happens, roughly 1-2 ms
+	 * later. However, the rx ring should be sized very conservatively,
+	 * to accomodate the worst reasonable delay before the host CPU
+	 * services a rx indication interrupt.
+	 *
+	 * The rx ring need not be kept full of empty buffers. In theory,
+	 * the htt host SW can dynamically track the low-water mark in the
+	 * rx ring, and dynamically adjust the level to which the rx ring
+	 * is filled with empty buffers, to dynamically meet the desired
+	 * low-water mark.
+	 *
+	 * In contrast, it's difficult to resize the rx ring itself, once
+	 * it's in use. Thus, the ring itself should be sized very
+	 * conservatively, while the degree to which the ring is filled
+	 * with empty buffers should be sized moderately conservatively.
+	 */
+
+	/* 1e6 bps/mbps / 1e3 ms per sec = 1000 */
+	size =
+	    htt->max_throughput_mbps +
+	    1000  /
+	    (8 * HTT_RX_AVG_FRM_BYTES) * HTT_RX_HOST_LATENCY_MAX_MS;
+
+	if (size < HTT_RX_RING_SIZE_MIN)
+		size = HTT_RX_RING_SIZE_MIN;
+
+	if (size > HTT_RX_RING_SIZE_MAX)
+		size = HTT_RX_RING_SIZE_MAX;
+
+	size = roundup_pow_of_two(size);
+
+	return size;
+}
+
+static int ath10k_htt_rx_ring_fill_level(struct ath10k_htt *htt)
+{
+	int size;
+
+	/* 1e6 bps/mbps / 1e3 ms per sec = 1000 */
+	size =
+	    htt->max_throughput_mbps *
+	    1000  /
+	    (8 * HTT_RX_AVG_FRM_BYTES) * HTT_RX_HOST_LATENCY_WORST_LIKELY_MS;
+
+	/*
+	 * Make sure the fill level is at least 1 less than the ring size.
+	 * Leaving 1 element empty allows the SW to easily distinguish
+	 * between a full ring vs. an empty ring.
+	 */
+	if (size >= htt->rx_ring.size)
+		size = htt->rx_ring.size - 1;
+
+	return size;
+}
+
+static void ath10k_htt_rx_ring_free(struct ath10k_htt *htt)
+{
+	struct sk_buff *skb;
+	struct ath10k_skb_cb *cb;
+	int i;
+
+	for (i = 0; i < htt->rx_ring.fill_cnt; i++) {
+		skb = htt->rx_ring.netbufs_ring[i];
+		cb = ATH10K_SKB_CB(skb);
+		dma_unmap_single(htt->ar->dev, cb->paddr,
+				 skb->len + skb_tailroom(skb),
+				 DMA_FROM_DEVICE);
+		dev_kfree_skb_any(skb);
+	}
+
+	htt->rx_ring.fill_cnt = 0;
+}
+
+static int __ath10k_htt_rx_ring_fill_n(struct ath10k_htt *htt, int num)
+{
+	struct htt_rx_desc *rx_desc;
+	struct sk_buff *skb;
+	dma_addr_t paddr;
+	int ret = 0, idx;
+
+	idx = __le32_to_cpu(*(htt->rx_ring.alloc_idx.vaddr));
+	while (num > 0) {
+		skb = dev_alloc_skb(HTT_RX_BUF_SIZE + HTT_RX_DESC_ALIGN);
+		if (!skb) {
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		if (!IS_ALIGNED((unsigned long)skb->data, HTT_RX_DESC_ALIGN))
+			skb_pull(skb,
+				 PTR_ALIGN(skb->data, HTT_RX_DESC_ALIGN) -
+				 skb->data);
+
+		/* Clear rx_desc attention word before posting to Rx ring */
+		rx_desc = (struct htt_rx_desc *)skb->data;
+		rx_desc->attention.flags = __cpu_to_le32(0);
+
+		paddr = dma_map_single(htt->ar->dev, skb->data,
+				       skb->len + skb_tailroom(skb),
+				       DMA_FROM_DEVICE);
+
+		if (unlikely(dma_mapping_error(htt->ar->dev, paddr))) {
+			dev_kfree_skb_any(skb);
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		ATH10K_SKB_CB(skb)->paddr = paddr;
+		htt->rx_ring.netbufs_ring[idx] = skb;
+		htt->rx_ring.paddrs_ring[idx] = __cpu_to_le32(paddr);
+		htt->rx_ring.fill_cnt++;
+
+		num--;
+		idx++;
+		idx &= htt->rx_ring.size_mask;
+	}
+
+fail:
+	*(htt->rx_ring.alloc_idx.vaddr) = __cpu_to_le32(idx);
+	return ret;
+}
+
+static int ath10k_htt_rx_ring_fill_n(struct ath10k_htt *htt, int num)
+{
+	lockdep_assert_held(&htt->rx_ring.lock);
+	return __ath10k_htt_rx_ring_fill_n(htt, num);
+}
+
+static void ath10k_htt_rx_msdu_buff_replenish(struct ath10k_htt *htt)
+{
+	int ret, num_to_fill;
+
+	spin_lock_bh(&htt->rx_ring.lock);
+	num_to_fill = htt->rx_ring.fill_level - htt->rx_ring.fill_cnt;
+	ret = ath10k_htt_rx_ring_fill_n(htt, num_to_fill);
+	if (ret == -ENOMEM) {
+		/*
+		 * Failed to fill it to the desired level -
+		 * we'll start a timer and try again next time.
+		 * As long as enough buffers are left in the ring for
+		 * another A-MPDU rx, no special recovery is needed.
+		 */
+		mod_timer(&htt->rx_ring.refill_retry_timer, jiffies +
+			  msecs_to_jiffies(HTT_RX_RING_REFILL_RETRY_MS));
+	}
+	spin_unlock_bh(&htt->rx_ring.lock);
+}
+
+static void ath10k_htt_rx_ring_refill_retry(unsigned long arg)
+{
+	struct ath10k_htt *htt = (struct ath10k_htt *)arg;
+	ath10k_htt_rx_msdu_buff_replenish(htt);
+}
+
+static unsigned ath10k_htt_rx_ring_elems(struct ath10k_htt *htt)
+{
+	return (__le32_to_cpu(*htt->rx_ring.alloc_idx.vaddr) -
+		htt->rx_ring.sw_rd_idx.msdu_payld) & htt->rx_ring.size_mask;
+}
+
+void ath10k_htt_rx_detach(struct ath10k_htt *htt)
+{
+	int sw_rd_idx = htt->rx_ring.sw_rd_idx.msdu_payld;
+
+	del_timer_sync(&htt->rx_ring.refill_retry_timer);
+
+	while (sw_rd_idx != __le32_to_cpu(*(htt->rx_ring.alloc_idx.vaddr))) {
+		struct sk_buff *skb =
+				htt->rx_ring.netbufs_ring[sw_rd_idx];
+		struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb);
+
+		dma_unmap_single(htt->ar->dev, cb->paddr,
+				 skb->len + skb_tailroom(skb),
+				 DMA_FROM_DEVICE);
+		dev_kfree_skb_any(htt->rx_ring.netbufs_ring[sw_rd_idx]);
+		sw_rd_idx++;
+		sw_rd_idx &= htt->rx_ring.size_mask;
+	}
+
+	dma_free_coherent(htt->ar->dev,
+			  (htt->rx_ring.size *
+			   sizeof(htt->rx_ring.paddrs_ring)),
+			  htt->rx_ring.paddrs_ring,
+			  htt->rx_ring.base_paddr);
+
+	dma_free_coherent(htt->ar->dev,
+			  sizeof(*htt->rx_ring.alloc_idx.vaddr),
+			  htt->rx_ring.alloc_idx.vaddr,
+			  htt->rx_ring.alloc_idx.paddr);
+
+	kfree(htt->rx_ring.netbufs_ring);
+}
+
+static inline struct sk_buff *ath10k_htt_rx_netbuf_pop(struct ath10k_htt *htt)
+{
+	int idx;
+	struct sk_buff *msdu;
+
+	spin_lock_bh(&htt->rx_ring.lock);
+
+	if (ath10k_htt_rx_ring_elems(htt) == 0)
+		ath10k_warn("htt rx ring is empty!\n");
+
+	idx = htt->rx_ring.sw_rd_idx.msdu_payld;
+	msdu = htt->rx_ring.netbufs_ring[idx];
+
+	idx++;
+	idx &= htt->rx_ring.size_mask;
+	htt->rx_ring.sw_rd_idx.msdu_payld = idx;
+	htt->rx_ring.fill_cnt--;
+
+	spin_unlock_bh(&htt->rx_ring.lock);
+	return msdu;
+}
+
+static void ath10k_htt_rx_free_msdu_chain(struct sk_buff *skb)
+{
+	struct sk_buff *next;
+
+	while (skb) {
+		next = skb->next;
+		dev_kfree_skb_any(skb);
+		skb = next;
+	}
+}
+
+static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
+				   u8 **fw_desc, int *fw_desc_len,
+				   struct sk_buff **head_msdu,
+				   struct sk_buff **tail_msdu)
+{
+	int msdu_len, msdu_chaining = 0;
+	struct sk_buff *msdu;
+	struct htt_rx_desc *rx_desc;
+
+	if (ath10k_htt_rx_ring_elems(htt) == 0)
+		ath10k_warn("htt rx ring is empty!\n");
+
+	if (htt->rx_confused) {
+		ath10k_warn("htt is confused. refusing rx\n");
+		return 0;
+	}
+
+	msdu = *head_msdu = ath10k_htt_rx_netbuf_pop(htt);
+	while (msdu) {
+		int last_msdu, msdu_len_invalid, msdu_chained;
+
+		dma_unmap_single(htt->ar->dev,
+				 ATH10K_SKB_CB(msdu)->paddr,
+				 msdu->len + skb_tailroom(msdu),
+				 DMA_FROM_DEVICE);
+
+		ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt rx: ",
+				msdu->data, msdu->len + skb_tailroom(msdu));
+
+		rx_desc = (struct htt_rx_desc *)msdu->data;
+
+		/* FIXME: we must report msdu payload since this is what caller
+		 *        expects now */
+		skb_put(msdu, offsetof(struct htt_rx_desc, msdu_payload));
+		skb_pull(msdu, offsetof(struct htt_rx_desc, msdu_payload));
+
+		/*
+		 * Sanity check - confirm the HW is finished filling in the
+		 * rx data.
+		 * If the HW and SW are working correctly, then it's guaranteed
+		 * that the HW's MAC DMA is done before this point in the SW.
+		 * To prevent the case that we handle a stale Rx descriptor,
+		 * just assert for now until we have a way to recover.
+		 */
+		if (!(__le32_to_cpu(rx_desc->attention.flags)
+				& RX_ATTENTION_FLAGS_MSDU_DONE)) {
+			ath10k_htt_rx_free_msdu_chain(*head_msdu);
+			*head_msdu = NULL;
+			msdu = NULL;
+			ath10k_err("htt rx stopped. cannot recover\n");
+			htt->rx_confused = true;
+			break;
+		}
+
+		/*
+		 * Copy the FW rx descriptor for this MSDU from the rx
+		 * indication message into the MSDU's netbuf. HL uses the
+		 * same rx indication message definition as LL, and simply
+		 * appends new info (fields from the HW rx desc, and the
+		 * MSDU payload itself). So, the offset into the rx
+		 * indication message only has to account for the standard
+		 * offset of the per-MSDU FW rx desc info within the
+		 * message, and how many bytes of the per-MSDU FW rx desc
+		 * info have already been consumed. (And the endianness of
+		 * the host, since for a big-endian host, the rx ind
+		 * message contents, including the per-MSDU rx desc bytes,
+		 * were byteswapped during upload.)
+		 */
+		if (*fw_desc_len > 0) {
+			rx_desc->fw_desc.info0 = **fw_desc;
+			/*
+			 * The target is expected to only provide the basic
+			 * per-MSDU rx descriptors. Just to be sure, verify
+			 * that the target has not attached extension data
+			 * (e.g. LRO flow ID).
+			 */
+
+			/* or more, if there's extension data */
+			(*fw_desc)++;
+			(*fw_desc_len)--;
+		} else {
+			/*
+			 * When an oversized AMSDU happened, FW will lost
+			 * some of MSDU status - in this case, the FW
+			 * descriptors provided will be less than the
+			 * actual MSDUs inside this MPDU. Mark the FW
+			 * descriptors so that it will still deliver to
+			 * upper stack, if no CRC error for this MPDU.
+			 *
+			 * FIX THIS - the FW descriptors are actually for
+			 * MSDUs in the end of this A-MSDU instead of the
+			 * beginning.
+			 */
+			rx_desc->fw_desc.info0 = 0;
+		}
+
+		msdu_len_invalid = !!(__le32_to_cpu(rx_desc->attention.flags)
+					& (RX_ATTENTION_FLAGS_MPDU_LENGTH_ERR |
+					   RX_ATTENTION_FLAGS_MSDU_LENGTH_ERR));
+		msdu_len = MS(__le32_to_cpu(rx_desc->msdu_start.info0),
+			      RX_MSDU_START_INFO0_MSDU_LENGTH);
+		msdu_chained = rx_desc->frag_info.ring2_more_count;
+
+		if (msdu_len_invalid)
+			msdu_len = 0;
+
+		skb_trim(msdu, 0);
+		skb_put(msdu, min(msdu_len, HTT_RX_MSDU_SIZE));
+		msdu_len -= msdu->len;
+
+		/* FIXME: Do chained buffers include htt_rx_desc or not? */
+		while (msdu_chained--) {
+			struct sk_buff *next = ath10k_htt_rx_netbuf_pop(htt);
+
+			dma_unmap_single(htt->ar->dev,
+					 ATH10K_SKB_CB(next)->paddr,
+					 next->len + skb_tailroom(next),
+					 DMA_FROM_DEVICE);
+
+			ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt rx: ",
+					next->data,
+					next->len + skb_tailroom(next));
+
+			skb_trim(next, 0);
+			skb_put(next, min(msdu_len, HTT_RX_BUF_SIZE));
+			msdu_len -= next->len;
+
+			msdu->next = next;
+			msdu = next;
+			msdu_chaining = 1;
+		}
+
+		if (msdu_len > 0) {
+			/* This may suggest FW bug? */
+			ath10k_warn("htt rx msdu len not consumed (%d)\n",
+				    msdu_len);
+		}
+
+		last_msdu = __le32_to_cpu(rx_desc->msdu_end.info0) &
+				RX_MSDU_END_INFO0_LAST_MSDU;
+
+		if (last_msdu) {
+			msdu->next = NULL;
+			break;
+		} else {
+			struct sk_buff *next = ath10k_htt_rx_netbuf_pop(htt);
+			msdu->next = next;
+			msdu = next;
+		}
+	}
+	*tail_msdu = msdu;
+
+	/*
+	 * Don't refill the ring yet.
+	 *
+	 * First, the elements popped here are still in use - it is not
+	 * safe to overwrite them until the matching call to
+	 * mpdu_desc_list_next. Second, for efficiency it is preferable to
+	 * refill the rx ring with 1 PPDU's worth of rx buffers (something
+	 * like 32 x 3 buffers), rather than one MPDU's worth of rx buffers
+	 * (something like 3 buffers). Consequently, we'll rely on the txrx
+	 * SW to tell us when it is done pulling all the PPDU's rx buffers
+	 * out of the rx ring, and then refill it just once.
+	 */
+
+	return msdu_chaining;
+}
+
+int ath10k_htt_rx_attach(struct ath10k_htt *htt)
+{
+	dma_addr_t paddr;
+	void *vaddr;
+	struct timer_list *timer = &htt->rx_ring.refill_retry_timer;
+
+	htt->rx_ring.size = ath10k_htt_rx_ring_size(htt);
+	if (!is_power_of_2(htt->rx_ring.size)) {
+		ath10k_warn("htt rx ring size is not power of 2\n");
+		return -EINVAL;
+	}
+
+	htt->rx_ring.size_mask = htt->rx_ring.size - 1;
+
+	/*
+	 * Set the initial value for the level to which the rx ring
+	 * should be filled, based on the max throughput and the
+	 * worst likely latency for the host to fill the rx ring
+	 * with new buffers. In theory, this fill level can be
+	 * dynamically adjusted from the initial value set here, to
+	 * reflect the actual host latency rather than a
+	 * conservative assumption about the host latency.
+	 */
+	htt->rx_ring.fill_level = ath10k_htt_rx_ring_fill_level(htt);
+
+	htt->rx_ring.netbufs_ring =
+		kmalloc(htt->rx_ring.size * sizeof(struct sk_buff *),
+			GFP_KERNEL);
+	if (!htt->rx_ring.netbufs_ring)
+		goto err_netbuf;
+
+	vaddr = dma_alloc_coherent(htt->ar->dev,
+		   (htt->rx_ring.size * sizeof(htt->rx_ring.paddrs_ring)),
+		   &paddr, GFP_DMA);
+	if (!vaddr)
+		goto err_dma_ring;
+
+	htt->rx_ring.paddrs_ring = vaddr;
+	htt->rx_ring.base_paddr = paddr;
+
+	vaddr = dma_alloc_coherent(htt->ar->dev,
+				   sizeof(*htt->rx_ring.alloc_idx.vaddr),
+				   &paddr, GFP_DMA);
+	if (!vaddr)
+		goto err_dma_idx;
+
+	htt->rx_ring.alloc_idx.vaddr = vaddr;
+	htt->rx_ring.alloc_idx.paddr = paddr;
+	htt->rx_ring.sw_rd_idx.msdu_payld = 0;
+	*htt->rx_ring.alloc_idx.vaddr = 0;
+
+	/* Initialize the Rx refill retry timer */
+	setup_timer(timer, ath10k_htt_rx_ring_refill_retry, (unsigned long)htt);
+
+	spin_lock_init(&htt->rx_ring.lock);
+
+	htt->rx_ring.fill_cnt = 0;
+	if (__ath10k_htt_rx_ring_fill_n(htt, htt->rx_ring.fill_level))
+		goto err_fill_ring;
+
+	ath10k_dbg(ATH10K_DBG_HTT, "HTT RX ring size: %d, fill_level: %d\n",
+		   htt->rx_ring.size, htt->rx_ring.fill_level);
+	return 0;
+
+err_fill_ring:
+	ath10k_htt_rx_ring_free(htt);
+	dma_free_coherent(htt->ar->dev,
+			  sizeof(*htt->rx_ring.alloc_idx.vaddr),
+			  htt->rx_ring.alloc_idx.vaddr,
+			  htt->rx_ring.alloc_idx.paddr);
+err_dma_idx:
+	dma_free_coherent(htt->ar->dev,
+			  (htt->rx_ring.size *
+			   sizeof(htt->rx_ring.paddrs_ring)),
+			  htt->rx_ring.paddrs_ring,
+			  htt->rx_ring.base_paddr);
+err_dma_ring:
+	kfree(htt->rx_ring.netbufs_ring);
+err_netbuf:
+	return -ENOMEM;
+}
+
+static int ath10k_htt_rx_crypto_param_len(enum htt_rx_mpdu_encrypt_type type)
+{
+	switch (type) {
+	case HTT_RX_MPDU_ENCRYPT_WEP40:
+	case HTT_RX_MPDU_ENCRYPT_WEP104:
+		return 4;
+	case HTT_RX_MPDU_ENCRYPT_TKIP_WITHOUT_MIC:
+	case HTT_RX_MPDU_ENCRYPT_WEP128: /* not tested */
+	case HTT_RX_MPDU_ENCRYPT_TKIP_WPA:
+	case HTT_RX_MPDU_ENCRYPT_WAPI: /* not tested */
+	case HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2:
+		return 8;
+	case HTT_RX_MPDU_ENCRYPT_NONE:
+		return 0;
+	}
+
+	ath10k_warn("unknown encryption type %d\n", type);
+	return 0;
+}
+
+static int ath10k_htt_rx_crypto_tail_len(enum htt_rx_mpdu_encrypt_type type)
+{
+	switch (type) {
+	case HTT_RX_MPDU_ENCRYPT_NONE:
+	case HTT_RX_MPDU_ENCRYPT_WEP40:
+	case HTT_RX_MPDU_ENCRYPT_WEP104:
+	case HTT_RX_MPDU_ENCRYPT_WEP128:
+	case HTT_RX_MPDU_ENCRYPT_WAPI:
+		return 0;
+	case HTT_RX_MPDU_ENCRYPT_TKIP_WITHOUT_MIC:
+	case HTT_RX_MPDU_ENCRYPT_TKIP_WPA:
+		return 4;
+	case HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2:
+		return 8;
+	}
+
+	ath10k_warn("unknown encryption type %d\n", type);
+	return 0;
+}
+
+/* Applies for first msdu in chain, before altering it. */
+static struct ieee80211_hdr *ath10k_htt_rx_skb_get_hdr(struct sk_buff *skb)
+{
+	struct htt_rx_desc *rxd;
+	enum rx_msdu_decap_format fmt;
+
+	rxd = (void *)skb->data - sizeof(*rxd);
+	fmt = MS(__le32_to_cpu(rxd->msdu_start.info1),
+			RX_MSDU_START_INFO1_DECAP_FORMAT);
+
+	if (fmt == RX_MSDU_DECAP_RAW)
+		return (void *)skb->data;
+	else
+		return (void *)skb->data - RX_HTT_HDR_STATUS_LEN;
+}
+
+/* This function only applies for first msdu in an msdu chain */
+static bool ath10k_htt_rx_hdr_is_amsdu(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		if (qc[0] & 0x80)
+			return true;
+	}
+	return false;
+}
+
+static int ath10k_htt_rx_amsdu(struct ath10k_htt *htt,
+			struct htt_rx_info *info)
+{
+	struct htt_rx_desc *rxd;
+	struct sk_buff *amsdu;
+	struct sk_buff *first;
+	struct ieee80211_hdr *hdr;
+	struct sk_buff *skb = info->skb;
+	enum rx_msdu_decap_format fmt;
+	enum htt_rx_mpdu_encrypt_type enctype;
+	unsigned int hdr_len;
+	int crypto_len;
+
+	rxd = (void *)skb->data - sizeof(*rxd);
+	fmt = MS(__le32_to_cpu(rxd->msdu_start.info1),
+			RX_MSDU_START_INFO1_DECAP_FORMAT);
+	enctype = MS(__le32_to_cpu(rxd->mpdu_start.info0),
+			RX_MPDU_START_INFO0_ENCRYPT_TYPE);
+
+	/* FIXME: No idea what assumptions are safe here. Need logs */
+	if ((fmt == RX_MSDU_DECAP_RAW && skb->next) ||
+	    (fmt == RX_MSDU_DECAP_8023_SNAP_LLC)) {
+		ath10k_htt_rx_free_msdu_chain(skb->next);
+		skb->next = NULL;
+		return -ENOTSUPP;
+	}
+
+	/* A-MSDU max is a little less than 8K */
+	amsdu = dev_alloc_skb(8*1024);
+	if (!amsdu) {
+		ath10k_warn("A-MSDU allocation failed\n");
+		ath10k_htt_rx_free_msdu_chain(skb->next);
+		skb->next = NULL;
+		return -ENOMEM;
+	}
+
+	if (fmt >= RX_MSDU_DECAP_NATIVE_WIFI) {
+		int hdrlen;
+
+		hdr = (void *)rxd->rx_hdr_status;
+		hdrlen = ieee80211_hdrlen(hdr->frame_control);
+		memcpy(skb_put(amsdu, hdrlen), hdr, hdrlen);
+	}
+
+	first = skb;
+	while (skb) {
+		void *decap_hdr;
+		int decap_len = 0;
+
+		rxd = (void *)skb->data - sizeof(*rxd);
+		fmt = MS(__le32_to_cpu(rxd->msdu_start.info1),
+				RX_MSDU_START_INFO1_DECAP_FORMAT);
+		decap_hdr = (void *)rxd->rx_hdr_status;
+
+		if (skb == first) {
+			/* We receive linked A-MSDU subframe skbuffs. The
+			 * first one contains the original 802.11 header (and
+			 * possible crypto param) in the RX descriptor. The
+			 * A-MSDU subframe header follows that. Each part is
+			 * aligned to 4 byte boundary. */
+
+			hdr = (void *)amsdu->data;
+			hdr_len = ieee80211_hdrlen(hdr->frame_control);
+			crypto_len = ath10k_htt_rx_crypto_param_len(enctype);
+
+			decap_hdr += roundup(hdr_len, 4);
+			decap_hdr += roundup(crypto_len, 4);
+		}
+
+		if (fmt == RX_MSDU_DECAP_ETHERNET2_DIX) {
+			/* Ethernet2 decap inserts ethernet header in place of
+			 * A-MSDU subframe header. */
+			skb_pull(skb, 6 + 6 + 2);
+
+			/* A-MSDU subframe header length */
+			decap_len += 6 + 6 + 2;
+
+			/* Ethernet2 decap also strips the LLC/SNAP so we need
+			 * to re-insert it. The LLC/SNAP follows A-MSDU
+			 * subframe header. */
+			/* FIXME: Not all LLCs are 8 bytes long */
+			decap_len += 8;
+
+			memcpy(skb_put(amsdu, decap_len), decap_hdr, decap_len);
+		}
+
+		if (fmt == RX_MSDU_DECAP_NATIVE_WIFI) {
+			/* Native Wifi decap inserts regular 802.11 header
+			 * in place of A-MSDU subframe header. */
+			hdr = (struct ieee80211_hdr *)skb->data;
+			skb_pull(skb, ieee80211_hdrlen(hdr->frame_control));
+
+			/* A-MSDU subframe header length */
+			decap_len += 6 + 6 + 2;
+
+			memcpy(skb_put(amsdu, decap_len), decap_hdr, decap_len);
+		}
+
+		if (fmt == RX_MSDU_DECAP_RAW)
+			skb_trim(skb, skb->len - 4); /* remove FCS */
+
+		memcpy(skb_put(amsdu, skb->len), skb->data, skb->len);
+
+		/* A-MSDU subframes are padded to 4bytes
+		 * but relative to first subframe, not the whole MPDU */
+		if (skb->next && ((decap_len + skb->len) & 3)) {
+			int padlen = 4 - ((decap_len + skb->len) & 3);
+			memset(skb_put(amsdu, padlen), 0, padlen);
+		}
+
+		skb = skb->next;
+	}
+
+	info->skb = amsdu;
+	info->encrypt_type = enctype;
+
+	ath10k_htt_rx_free_msdu_chain(first);
+
+	return 0;
+}
+
+static int ath10k_htt_rx_msdu(struct ath10k_htt *htt, struct htt_rx_info *info)
+{
+	struct sk_buff *skb = info->skb;
+	struct htt_rx_desc *rxd;
+	struct ieee80211_hdr *hdr;
+	enum rx_msdu_decap_format fmt;
+	enum htt_rx_mpdu_encrypt_type enctype;
+
+	/* This shouldn't happen. If it does than it may be a FW bug. */
+	if (skb->next) {
+		ath10k_warn("received chained non A-MSDU frame\n");
+		ath10k_htt_rx_free_msdu_chain(skb->next);
+		skb->next = NULL;
+	}
+
+	rxd = (void *)skb->data - sizeof(*rxd);
+	fmt = MS(__le32_to_cpu(rxd->msdu_start.info1),
+			RX_MSDU_START_INFO1_DECAP_FORMAT);
+	enctype = MS(__le32_to_cpu(rxd->mpdu_start.info0),
+			RX_MPDU_START_INFO0_ENCRYPT_TYPE);
+	hdr = (void *)skb->data - RX_HTT_HDR_STATUS_LEN;
+
+	switch (fmt) {
+	case RX_MSDU_DECAP_RAW:
+		/* remove trailing FCS */
+		skb_trim(skb, skb->len - 4);
+		break;
+	case RX_MSDU_DECAP_NATIVE_WIFI:
+		/* nothing to do here */
+		break;
+	case RX_MSDU_DECAP_ETHERNET2_DIX:
+		/* macaddr[6] + macaddr[6] + ethertype[2] */
+		skb_pull(skb, 6 + 6 + 2);
+		break;
+	case RX_MSDU_DECAP_8023_SNAP_LLC:
+		/* macaddr[6] + macaddr[6] + len[2] */
+		/* we don't need this for non-A-MSDU */
+		skb_pull(skb, 6 + 6 + 2);
+		break;
+	}
+
+	if (fmt == RX_MSDU_DECAP_ETHERNET2_DIX) {
+		void *llc;
+		int llclen;
+
+		llclen = 8;
+		llc  = hdr;
+		llc += roundup(ieee80211_hdrlen(hdr->frame_control), 4);
+		llc += roundup(ath10k_htt_rx_crypto_param_len(enctype), 4);
+
+		skb_push(skb, llclen);
+		memcpy(skb->data, llc, llclen);
+	}
+
+	if (fmt >= RX_MSDU_DECAP_ETHERNET2_DIX) {
+		int len = ieee80211_hdrlen(hdr->frame_control);
+		skb_push(skb, len);
+		memcpy(skb->data, hdr, len);
+	}
+
+	info->skb = skb;
+	info->encrypt_type = enctype;
+	return 0;
+}
+
+static bool ath10k_htt_rx_has_decrypt_err(struct sk_buff *skb)
+{
+	struct htt_rx_desc *rxd;
+	u32 flags;
+
+	rxd = (void *)skb->data - sizeof(*rxd);
+	flags = __le32_to_cpu(rxd->attention.flags);
+
+	if (flags & RX_ATTENTION_FLAGS_DECRYPT_ERR)
+		return true;
+
+	return false;
+}
+
+static bool ath10k_htt_rx_has_fcs_err(struct sk_buff *skb)
+{
+	struct htt_rx_desc *rxd;
+	u32 flags;
+
+	rxd = (void *)skb->data - sizeof(*rxd);
+	flags = __le32_to_cpu(rxd->attention.flags);
+
+	if (flags & RX_ATTENTION_FLAGS_FCS_ERR)
+		return true;
+
+	return false;
+}
+
+static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
+				  struct htt_rx_indication *rx)
+{
+	struct htt_rx_info info;
+	struct htt_rx_indication_mpdu_range *mpdu_ranges;
+	struct ieee80211_hdr *hdr;
+	int num_mpdu_ranges;
+	int fw_desc_len;
+	u8 *fw_desc;
+	int i, j;
+	int ret;
+
+	memset(&info, 0, sizeof(info));
+
+	fw_desc_len = __le16_to_cpu(rx->prefix.fw_rx_desc_bytes);
+	fw_desc = (u8 *)&rx->fw_desc;
+
+	num_mpdu_ranges = MS(__le32_to_cpu(rx->hdr.info1),
+			     HTT_RX_INDICATION_INFO1_NUM_MPDU_RANGES);
+	mpdu_ranges = htt_rx_ind_get_mpdu_ranges(rx);
+
+	ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt rx ind: ",
+			rx, sizeof(*rx) +
+			(sizeof(struct htt_rx_indication_mpdu_range) *
+				num_mpdu_ranges));
+
+	for (i = 0; i < num_mpdu_ranges; i++) {
+		info.status = mpdu_ranges[i].mpdu_range_status;
+
+		for (j = 0; j < mpdu_ranges[i].mpdu_count; j++) {
+			struct sk_buff *msdu_head, *msdu_tail;
+			enum htt_rx_mpdu_status status;
+			int msdu_chaining;
+
+			msdu_head = NULL;
+			msdu_tail = NULL;
+			msdu_chaining = ath10k_htt_rx_amsdu_pop(htt,
+							 &fw_desc,
+							 &fw_desc_len,
+							 &msdu_head,
+							 &msdu_tail);
+
+			if (!msdu_head) {
+				ath10k_warn("htt rx no data!\n");
+				continue;
+			}
+
+			if (msdu_head->len == 0) {
+				ath10k_dbg(ATH10K_DBG_HTT,
+					   "htt rx dropping due to zero-len\n");
+				ath10k_htt_rx_free_msdu_chain(msdu_head);
+				continue;
+			}
+
+			if (ath10k_htt_rx_has_decrypt_err(msdu_head)) {
+				ath10k_htt_rx_free_msdu_chain(msdu_head);
+				continue;
+			}
+
+			status = info.status;
+
+			/* Skip mgmt frames while we handle this in WMI */
+			if (status == HTT_RX_IND_MPDU_STATUS_MGMT_CTRL) {
+				ath10k_htt_rx_free_msdu_chain(msdu_head);
+				continue;
+			}
+
+			if (status != HTT_RX_IND_MPDU_STATUS_OK &&
+			    status != HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR &&
+			    !htt->ar->monitor_enabled) {
+				ath10k_dbg(ATH10K_DBG_HTT,
+					   "htt rx ignoring frame w/ status %d\n",
+					   status);
+				ath10k_htt_rx_free_msdu_chain(msdu_head);
+				continue;
+			}
+
+			/* FIXME: we do not support chaining yet.
+			 * this needs investigation */
+			if (msdu_chaining) {
+				ath10k_warn("msdu_chaining is true\n");
+				ath10k_htt_rx_free_msdu_chain(msdu_head);
+				continue;
+			}
+
+			info.skb     = msdu_head;
+			info.fcs_err = ath10k_htt_rx_has_fcs_err(msdu_head);
+			info.signal  = ATH10K_DEFAULT_NOISE_FLOOR;
+			info.signal += rx->ppdu.combined_rssi;
+
+			info.rate.info0 = rx->ppdu.info0;
+			info.rate.info1 = __le32_to_cpu(rx->ppdu.info1);
+			info.rate.info2 = __le32_to_cpu(rx->ppdu.info2);
+
+			hdr = ath10k_htt_rx_skb_get_hdr(msdu_head);
+
+			if (ath10k_htt_rx_hdr_is_amsdu(hdr))
+				ret = ath10k_htt_rx_amsdu(htt, &info);
+			else
+				ret = ath10k_htt_rx_msdu(htt, &info);
+
+			if (ret && !info.fcs_err) {
+				ath10k_warn("error processing msdus %d\n", ret);
+				dev_kfree_skb_any(info.skb);
+				continue;
+			}
+
+			if (ath10k_htt_rx_hdr_is_amsdu((void *)info.skb->data))
+				ath10k_dbg(ATH10K_DBG_HTT, "htt mpdu is amsdu\n");
+
+			ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt mpdu: ",
+					info.skb->data, info.skb->len);
+			ath10k_process_rx(htt->ar, &info);
+		}
+	}
+
+	ath10k_htt_rx_msdu_buff_replenish(htt);
+}
+
+static void ath10k_htt_rx_frag_handler(struct ath10k_htt *htt,
+				struct htt_rx_fragment_indication *frag)
+{
+	struct sk_buff *msdu_head, *msdu_tail;
+	struct htt_rx_desc *rxd;
+	enum rx_msdu_decap_format fmt;
+	struct htt_rx_info info = {};
+	struct ieee80211_hdr *hdr;
+	int msdu_chaining;
+	bool tkip_mic_err;
+	bool decrypt_err;
+	u8 *fw_desc;
+	int fw_desc_len, hdrlen, paramlen;
+	int trim;
+
+	fw_desc_len = __le16_to_cpu(frag->fw_rx_desc_bytes);
+	fw_desc = (u8 *)frag->fw_msdu_rx_desc;
+
+	msdu_head = NULL;
+	msdu_tail = NULL;
+	msdu_chaining = ath10k_htt_rx_amsdu_pop(htt, &fw_desc, &fw_desc_len,
+						&msdu_head, &msdu_tail);
+
+	ath10k_dbg(ATH10K_DBG_HTT_DUMP, "htt rx frag ahead\n");
+
+	if (!msdu_head) {
+		ath10k_warn("htt rx frag no data\n");
+		return;
+	}
+
+	if (msdu_chaining || msdu_head != msdu_tail) {
+		ath10k_warn("aggregation with fragmentation?!\n");
+		ath10k_htt_rx_free_msdu_chain(msdu_head);
+		return;
+	}
+
+	/* FIXME: implement signal strength */
+
+	hdr = (struct ieee80211_hdr *)msdu_head->data;
+	rxd = (void *)msdu_head->data - sizeof(*rxd);
+	tkip_mic_err = !!(__le32_to_cpu(rxd->attention.flags) &
+				RX_ATTENTION_FLAGS_TKIP_MIC_ERR);
+	decrypt_err = !!(__le32_to_cpu(rxd->attention.flags) &
+				RX_ATTENTION_FLAGS_DECRYPT_ERR);
+	fmt = MS(__le32_to_cpu(rxd->msdu_start.info1),
+			RX_MSDU_START_INFO1_DECAP_FORMAT);
+
+	if (fmt != RX_MSDU_DECAP_RAW) {
+		ath10k_warn("we dont support non-raw fragmented rx yet\n");
+		dev_kfree_skb_any(msdu_head);
+		goto end;
+	}
+
+	info.skb = msdu_head;
+	info.status = HTT_RX_IND_MPDU_STATUS_OK;
+	info.encrypt_type = MS(__le32_to_cpu(rxd->mpdu_start.info0),
+				RX_MPDU_START_INFO0_ENCRYPT_TYPE);
+
+	if (tkip_mic_err) {
+		ath10k_warn("tkip mic error\n");
+		info.status = HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR;
+	}
+
+	if (decrypt_err) {
+		ath10k_warn("decryption err in fragmented rx\n");
+		dev_kfree_skb_any(info.skb);
+		goto end;
+	}
+
+	if (info.encrypt_type != HTT_RX_MPDU_ENCRYPT_NONE) {
+		hdrlen = ieee80211_hdrlen(hdr->frame_control);
+		paramlen = ath10k_htt_rx_crypto_param_len(info.encrypt_type);
+
+		/* It is more efficient to move the header than the payload */
+		memmove((void *)info.skb->data + paramlen,
+			(void *)info.skb->data,
+			hdrlen);
+		skb_pull(info.skb, paramlen);
+		hdr = (struct ieee80211_hdr *)info.skb->data;
+	}
+
+	/* remove trailing FCS */
+	trim  = 4;
+
+	/* remove crypto trailer */
+	trim += ath10k_htt_rx_crypto_tail_len(info.encrypt_type);
+
+	/* last fragment of TKIP frags has MIC */
+	if (!ieee80211_has_morefrags(hdr->frame_control) &&
+	    info.encrypt_type == HTT_RX_MPDU_ENCRYPT_TKIP_WPA)
+		trim += 8;
+
+	if (trim > info.skb->len) {
+		ath10k_warn("htt rx fragment: trailer longer than the frame itself? drop\n");
+		dev_kfree_skb_any(info.skb);
+		goto end;
+	}
+
+	skb_trim(info.skb, info.skb->len - trim);
+
+	ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt frag mpdu: ",
+			info.skb->data, info.skb->len);
+	ath10k_process_rx(htt->ar, &info);
+
+end:
+	if (fw_desc_len > 0) {
+		ath10k_dbg(ATH10K_DBG_HTT,
+			   "expecting more fragmented rx in one indication %d\n",
+			   fw_desc_len);
+	}
+}
+
+void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct ath10k_htt *htt = ar->htt;
+	struct htt_resp *resp = (struct htt_resp *)skb->data;
+
+	/* confirm alignment */
+	if (!IS_ALIGNED((unsigned long)skb->data, 4))
+		ath10k_warn("unaligned htt message, expect trouble\n");
+
+	ath10k_dbg(ATH10K_DBG_HTT, "HTT RX, msg_type: 0x%0X\n",
+		   resp->hdr.msg_type);
+	switch (resp->hdr.msg_type) {
+	case HTT_T2H_MSG_TYPE_VERSION_CONF: {
+		htt->target_version_major = resp->ver_resp.major;
+		htt->target_version_minor = resp->ver_resp.minor;
+		complete(&htt->target_version_received);
+		break;
+	}
+	case HTT_T2H_MSG_TYPE_RX_IND: {
+		ath10k_htt_rx_handler(htt, &resp->rx_ind);
+		break;
+	}
+	case HTT_T2H_MSG_TYPE_PEER_MAP: {
+		struct htt_peer_map_event ev = {
+			.vdev_id = resp->peer_map.vdev_id,
+			.peer_id = __le16_to_cpu(resp->peer_map.peer_id),
+		};
+		memcpy(ev.addr, resp->peer_map.addr, sizeof(ev.addr));
+		ath10k_peer_map_event(htt, &ev);
+		break;
+	}
+	case HTT_T2H_MSG_TYPE_PEER_UNMAP: {
+		struct htt_peer_unmap_event ev = {
+			.peer_id = __le16_to_cpu(resp->peer_unmap.peer_id),
+		};
+		ath10k_peer_unmap_event(htt, &ev);
+		break;
+	}
+	case HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION: {
+		struct htt_tx_done tx_done = {};
+		int status = __le32_to_cpu(resp->mgmt_tx_completion.status);
+
+		tx_done.msdu_id =
+			__le32_to_cpu(resp->mgmt_tx_completion.desc_id);
+
+		switch (status) {
+		case HTT_MGMT_TX_STATUS_OK:
+			break;
+		case HTT_MGMT_TX_STATUS_RETRY:
+			tx_done.no_ack = true;
+			break;
+		case HTT_MGMT_TX_STATUS_DROP:
+			tx_done.discard = true;
+			break;
+		}
+
+		ath10k_txrx_tx_completed(htt, &tx_done);
+		break;
+	}
+	case HTT_T2H_MSG_TYPE_TX_COMPL_IND: {
+		struct htt_tx_done tx_done = {};
+		int status = MS(resp->data_tx_completion.flags,
+				HTT_DATA_TX_STATUS);
+		__le16 msdu_id;
+		int i;
+
+		switch (status) {
+		case HTT_DATA_TX_STATUS_NO_ACK:
+			tx_done.no_ack = true;
+			break;
+		case HTT_DATA_TX_STATUS_OK:
+			break;
+		case HTT_DATA_TX_STATUS_DISCARD:
+		case HTT_DATA_TX_STATUS_POSTPONE:
+		case HTT_DATA_TX_STATUS_DOWNLOAD_FAIL:
+			tx_done.discard = true;
+			break;
+		default:
+			ath10k_warn("unhandled tx completion status %d\n",
+				    status);
+			tx_done.discard = true;
+			break;
+		}
+
+		ath10k_dbg(ATH10K_DBG_HTT, "htt tx completion num_msdus %d\n",
+			   resp->data_tx_completion.num_msdus);
+
+		for (i = 0; i < resp->data_tx_completion.num_msdus; i++) {
+			msdu_id = resp->data_tx_completion.msdus[i];
+			tx_done.msdu_id = __le16_to_cpu(msdu_id);
+			ath10k_txrx_tx_completed(htt, &tx_done);
+		}
+		break;
+	}
+	case HTT_T2H_MSG_TYPE_SEC_IND: {
+		struct ath10k *ar = htt->ar;
+		struct htt_security_indication *ev = &resp->security_indication;
+
+		ath10k_dbg(ATH10K_DBG_HTT,
+			   "sec ind peer_id %d unicast %d type %d\n",
+			  __le16_to_cpu(ev->peer_id),
+			  !!(ev->flags & HTT_SECURITY_IS_UNICAST),
+			  MS(ev->flags, HTT_SECURITY_TYPE));
+		complete(&ar->install_key_done);
+		break;
+	}
+	case HTT_T2H_MSG_TYPE_RX_FRAG_IND: {
+		ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt event: ",
+				skb->data, skb->len);
+		ath10k_htt_rx_frag_handler(htt, &resp->rx_frag_ind);
+		break;
+	}
+	case HTT_T2H_MSG_TYPE_TEST:
+		/* FIX THIS */
+		break;
+	case HTT_T2H_MSG_TYPE_TX_INSPECT_IND:
+	case HTT_T2H_MSG_TYPE_STATS_CONF:
+	case HTT_T2H_MSG_TYPE_RX_ADDBA:
+	case HTT_T2H_MSG_TYPE_RX_DELBA:
+	case HTT_T2H_MSG_TYPE_RX_FLUSH:
+	default:
+		ath10k_dbg(ATH10K_DBG_HTT, "htt event (%d) not handled\n",
+			   resp->hdr.msg_type);
+		ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt event: ",
+				skb->data, skb->len);
+		break;
+	};
+
+	/* Free the indication buffer */
+	dev_kfree_skb_any(skb);
+}
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
new file mode 100644
index 000000000000..ef79106db247
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -0,0 +1,510 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/etherdevice.h>
+#include "htt.h"
+#include "mac.h"
+#include "hif.h"
+#include "txrx.h"
+#include "debug.h"
+
+void __ath10k_htt_tx_dec_pending(struct ath10k_htt *htt)
+{
+	htt->num_pending_tx--;
+	if (htt->num_pending_tx == htt->max_num_pending_tx - 1)
+		ieee80211_wake_queues(htt->ar->hw);
+}
+
+static void ath10k_htt_tx_dec_pending(struct ath10k_htt *htt)
+{
+	spin_lock_bh(&htt->tx_lock);
+	__ath10k_htt_tx_dec_pending(htt);
+	spin_unlock_bh(&htt->tx_lock);
+}
+
+static int ath10k_htt_tx_inc_pending(struct ath10k_htt *htt)
+{
+	int ret = 0;
+
+	spin_lock_bh(&htt->tx_lock);
+
+	if (htt->num_pending_tx >= htt->max_num_pending_tx) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	htt->num_pending_tx++;
+	if (htt->num_pending_tx == htt->max_num_pending_tx)
+		ieee80211_stop_queues(htt->ar->hw);
+
+exit:
+	spin_unlock_bh(&htt->tx_lock);
+	return ret;
+}
+
+int ath10k_htt_tx_alloc_msdu_id(struct ath10k_htt *htt)
+{
+	int msdu_id;
+
+	lockdep_assert_held(&htt->tx_lock);
+
+	msdu_id = find_first_zero_bit(htt->used_msdu_ids,
+				      htt->max_num_pending_tx);
+	if (msdu_id == htt->max_num_pending_tx)
+		return -ENOBUFS;
+
+	ath10k_dbg(ATH10K_DBG_HTT, "htt tx alloc msdu_id %d\n", msdu_id);
+	__set_bit(msdu_id, htt->used_msdu_ids);
+	return msdu_id;
+}
+
+void ath10k_htt_tx_free_msdu_id(struct ath10k_htt *htt, u16 msdu_id)
+{
+	lockdep_assert_held(&htt->tx_lock);
+
+	if (!test_bit(msdu_id, htt->used_msdu_ids))
+		ath10k_warn("trying to free unallocated msdu_id %d\n", msdu_id);
+
+	ath10k_dbg(ATH10K_DBG_HTT, "htt tx free msdu_id %hu\n", msdu_id);
+	__clear_bit(msdu_id, htt->used_msdu_ids);
+}
+
+int ath10k_htt_tx_attach(struct ath10k_htt *htt)
+{
+	u8 pipe;
+
+	spin_lock_init(&htt->tx_lock);
+	init_waitqueue_head(&htt->empty_tx_wq);
+
+	/* At the beginning free queue number should hint us the maximum
+	 * queue length */
+	pipe = htt->ar->htc->endpoint[htt->eid].ul_pipe_id;
+	htt->max_num_pending_tx = ath10k_hif_get_free_queue_number(htt->ar,
+								   pipe);
+
+	ath10k_dbg(ATH10K_DBG_HTT, "htt tx max num pending tx %d\n",
+		   htt->max_num_pending_tx);
+
+	htt->pending_tx = kzalloc(sizeof(*htt->pending_tx) *
+				  htt->max_num_pending_tx, GFP_KERNEL);
+	if (!htt->pending_tx)
+		return -ENOMEM;
+
+	htt->used_msdu_ids = kzalloc(sizeof(unsigned long) *
+				     BITS_TO_LONGS(htt->max_num_pending_tx),
+				     GFP_KERNEL);
+	if (!htt->used_msdu_ids) {
+		kfree(htt->pending_tx);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void ath10k_htt_tx_cleanup_pending(struct ath10k_htt *htt)
+{
+	struct sk_buff *txdesc;
+	int msdu_id;
+
+	/* No locks needed. Called after communication with the device has
+	 * been stopped. */
+
+	for (msdu_id = 0; msdu_id < htt->max_num_pending_tx; msdu_id++) {
+		if (!test_bit(msdu_id, htt->used_msdu_ids))
+			continue;
+
+		txdesc = htt->pending_tx[msdu_id];
+		if (!txdesc)
+			continue;
+
+		ath10k_dbg(ATH10K_DBG_HTT, "force cleanup msdu_id %hu\n",
+			   msdu_id);
+
+		if (ATH10K_SKB_CB(txdesc)->htt.refcount > 0)
+			ATH10K_SKB_CB(txdesc)->htt.refcount = 1;
+
+		ATH10K_SKB_CB(txdesc)->htt.discard = true;
+		ath10k_txrx_tx_unref(htt, txdesc);
+	}
+}
+
+void ath10k_htt_tx_detach(struct ath10k_htt *htt)
+{
+	ath10k_htt_tx_cleanup_pending(htt);
+	kfree(htt->pending_tx);
+	kfree(htt->used_msdu_ids);
+	return;
+}
+
+void ath10k_htt_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
+	struct ath10k_htt *htt = ar->htt;
+
+	if (skb_cb->htt.is_conf) {
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	if (skb_cb->is_aborted) {
+		skb_cb->htt.discard = true;
+
+		/* if the skbuff is aborted we need to make sure we'll free up
+		 * the tx resources, we can't simply run tx_unref() 2 times
+		 * because if htt tx completion came in earlier we'd access
+		 * unallocated memory */
+		if (skb_cb->htt.refcount > 1)
+			skb_cb->htt.refcount = 1;
+	}
+
+	ath10k_txrx_tx_unref(htt, skb);
+}
+
+int ath10k_htt_h2t_ver_req_msg(struct ath10k_htt *htt)
+{
+	struct sk_buff *skb;
+	struct htt_cmd *cmd;
+	int len = 0;
+	int ret;
+
+	len += sizeof(cmd->hdr);
+	len += sizeof(cmd->ver_req);
+
+	skb = ath10k_htc_alloc_skb(len);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put(skb, len);
+	cmd = (struct htt_cmd *)skb->data;
+	cmd->hdr.msg_type = HTT_H2T_MSG_TYPE_VERSION_REQ;
+
+	ATH10K_SKB_CB(skb)->htt.is_conf = true;
+
+	ret = ath10k_htc_send(htt->ar->htc, htt->eid, skb);
+	if (ret) {
+		dev_kfree_skb_any(skb);
+		return ret;
+	}
+
+	return 0;
+}
+
+int ath10k_htt_send_rx_ring_cfg_ll(struct ath10k_htt *htt)
+{
+	struct sk_buff *skb;
+	struct htt_cmd *cmd;
+	struct htt_rx_ring_setup_ring *ring;
+	const int num_rx_ring = 1;
+	u16 flags;
+	u32 fw_idx;
+	int len;
+	int ret;
+
+	/*
+	 * the HW expects the buffer to be an integral number of 4-byte
+	 * "words"
+	 */
+	BUILD_BUG_ON(!IS_ALIGNED(HTT_RX_BUF_SIZE, 4));
+	BUILD_BUG_ON((HTT_RX_BUF_SIZE & HTT_MAX_CACHE_LINE_SIZE_MASK) != 0);
+
+	len = sizeof(cmd->hdr) + sizeof(cmd->rx_setup.hdr)
+	    + (sizeof(*ring) * num_rx_ring);
+	skb = ath10k_htc_alloc_skb(len);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put(skb, len);
+
+	cmd = (struct htt_cmd *)skb->data;
+	ring = &cmd->rx_setup.rings[0];
+
+	cmd->hdr.msg_type = HTT_H2T_MSG_TYPE_RX_RING_CFG;
+	cmd->rx_setup.hdr.num_rings = 1;
+
+	/* FIXME: do we need all of this? */
+	flags = 0;
+	flags |= HTT_RX_RING_FLAGS_MAC80211_HDR;
+	flags |= HTT_RX_RING_FLAGS_MSDU_PAYLOAD;
+	flags |= HTT_RX_RING_FLAGS_PPDU_START;
+	flags |= HTT_RX_RING_FLAGS_PPDU_END;
+	flags |= HTT_RX_RING_FLAGS_MPDU_START;
+	flags |= HTT_RX_RING_FLAGS_MPDU_END;
+	flags |= HTT_RX_RING_FLAGS_MSDU_START;
+	flags |= HTT_RX_RING_FLAGS_MSDU_END;
+	flags |= HTT_RX_RING_FLAGS_RX_ATTENTION;
+	flags |= HTT_RX_RING_FLAGS_FRAG_INFO;
+	flags |= HTT_RX_RING_FLAGS_UNICAST_RX;
+	flags |= HTT_RX_RING_FLAGS_MULTICAST_RX;
+	flags |= HTT_RX_RING_FLAGS_CTRL_RX;
+	flags |= HTT_RX_RING_FLAGS_MGMT_RX;
+	flags |= HTT_RX_RING_FLAGS_NULL_RX;
+	flags |= HTT_RX_RING_FLAGS_PHY_DATA_RX;
+
+	fw_idx = __le32_to_cpu(*htt->rx_ring.alloc_idx.vaddr);
+
+	ring->fw_idx_shadow_reg_paddr =
+		__cpu_to_le32(htt->rx_ring.alloc_idx.paddr);
+	ring->rx_ring_base_paddr = __cpu_to_le32(htt->rx_ring.base_paddr);
+	ring->rx_ring_len = __cpu_to_le16(htt->rx_ring.size);
+	ring->rx_ring_bufsize = __cpu_to_le16(HTT_RX_BUF_SIZE);
+	ring->flags = __cpu_to_le16(flags);
+	ring->fw_idx_init_val = __cpu_to_le16(fw_idx);
+
+#define desc_offset(x) (offsetof(struct htt_rx_desc, x) / 4)
+
+	ring->mac80211_hdr_offset = __cpu_to_le16(desc_offset(rx_hdr_status));
+	ring->msdu_payload_offset = __cpu_to_le16(desc_offset(msdu_payload));
+	ring->ppdu_start_offset = __cpu_to_le16(desc_offset(ppdu_start));
+	ring->ppdu_end_offset = __cpu_to_le16(desc_offset(ppdu_end));
+	ring->mpdu_start_offset = __cpu_to_le16(desc_offset(mpdu_start));
+	ring->mpdu_end_offset = __cpu_to_le16(desc_offset(mpdu_end));
+	ring->msdu_start_offset = __cpu_to_le16(desc_offset(msdu_start));
+	ring->msdu_end_offset = __cpu_to_le16(desc_offset(msdu_end));
+	ring->rx_attention_offset = __cpu_to_le16(desc_offset(attention));
+	ring->frag_info_offset = __cpu_to_le16(desc_offset(frag_info));
+
+#undef desc_offset
+
+	ATH10K_SKB_CB(skb)->htt.is_conf = true;
+
+	ret = ath10k_htc_send(htt->ar->htc, htt->eid, skb);
+	if (ret) {
+		dev_kfree_skb_any(skb);
+		return ret;
+	}
+
+	return 0;
+}
+
+int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
+{
+	struct device *dev = htt->ar->dev;
+	struct ath10k_skb_cb *skb_cb;
+	struct sk_buff *txdesc = NULL;
+	struct htt_cmd *cmd;
+	u8 vdev_id = ATH10K_SKB_CB(msdu)->htt.vdev_id;
+	int len = 0;
+	int msdu_id = -1;
+	int res;
+
+
+	res = ath10k_htt_tx_inc_pending(htt);
+	if (res)
+		return res;
+
+	len += sizeof(cmd->hdr);
+	len += sizeof(cmd->mgmt_tx);
+
+	txdesc = ath10k_htc_alloc_skb(len);
+	if (!txdesc) {
+		res = -ENOMEM;
+		goto err;
+	}
+
+	spin_lock_bh(&htt->tx_lock);
+	msdu_id = ath10k_htt_tx_alloc_msdu_id(htt);
+	if (msdu_id < 0) {
+		spin_unlock_bh(&htt->tx_lock);
+		res = msdu_id;
+		goto err;
+	}
+	htt->pending_tx[msdu_id] = txdesc;
+	spin_unlock_bh(&htt->tx_lock);
+
+	res = ath10k_skb_map(dev, msdu);
+	if (res)
+		goto err;
+
+	skb_put(txdesc, len);
+	cmd = (struct htt_cmd *)txdesc->data;
+	cmd->hdr.msg_type         = HTT_H2T_MSG_TYPE_MGMT_TX;
+	cmd->mgmt_tx.msdu_paddr = __cpu_to_le32(ATH10K_SKB_CB(msdu)->paddr);
+	cmd->mgmt_tx.len        = __cpu_to_le32(msdu->len);
+	cmd->mgmt_tx.desc_id    = __cpu_to_le32(msdu_id);
+	cmd->mgmt_tx.vdev_id    = __cpu_to_le32(vdev_id);
+	memcpy(cmd->mgmt_tx.hdr, msdu->data,
+	       min_t(int, msdu->len, HTT_MGMT_FRM_HDR_DOWNLOAD_LEN));
+
+	/* refcount is decremented by HTC and HTT completions until it reaches
+	 * zero and is freed */
+	skb_cb = ATH10K_SKB_CB(txdesc);
+	skb_cb->htt.msdu_id = msdu_id;
+	skb_cb->htt.refcount = 2;
+	skb_cb->htt.msdu = msdu;
+
+	res = ath10k_htc_send(htt->ar->htc, htt->eid, txdesc);
+	if (res)
+		goto err;
+
+	return 0;
+
+err:
+	ath10k_skb_unmap(dev, msdu);
+
+	if (txdesc)
+		dev_kfree_skb_any(txdesc);
+	if (msdu_id >= 0) {
+		spin_lock_bh(&htt->tx_lock);
+		htt->pending_tx[msdu_id] = NULL;
+		ath10k_htt_tx_free_msdu_id(htt, msdu_id);
+		spin_unlock_bh(&htt->tx_lock);
+	}
+	ath10k_htt_tx_dec_pending(htt);
+	return res;
+}
+
+int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
+{
+	struct device *dev = htt->ar->dev;
+	struct htt_cmd *cmd;
+	struct htt_data_tx_desc_frag *tx_frags;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
+	struct ath10k_skb_cb *skb_cb;
+	struct sk_buff *txdesc = NULL;
+	struct sk_buff *txfrag = NULL;
+	u8 vdev_id = ATH10K_SKB_CB(msdu)->htt.vdev_id;
+	u8 tid;
+	int prefetch_len, desc_len, frag_len;
+	dma_addr_t frags_paddr;
+	int msdu_id = -1;
+	int res;
+	u8 flags0;
+	u16 flags1;
+
+	res = ath10k_htt_tx_inc_pending(htt);
+	if (res)
+		return res;
+
+	prefetch_len = min(htt->prefetch_len, msdu->len);
+	prefetch_len = roundup(prefetch_len, 4);
+
+	desc_len = sizeof(cmd->hdr) + sizeof(cmd->data_tx) + prefetch_len;
+	frag_len = sizeof(*tx_frags) * 2;
+
+	txdesc = ath10k_htc_alloc_skb(desc_len);
+	if (!txdesc) {
+		res = -ENOMEM;
+		goto err;
+	}
+
+	txfrag = dev_alloc_skb(frag_len);
+	if (!txfrag) {
+		res = -ENOMEM;
+		goto err;
+	}
+
+	if (!IS_ALIGNED((unsigned long)txdesc->data, 4)) {
+		ath10k_warn("htt alignment check failed. dropping packet.\n");
+		res = -EIO;
+		goto err;
+	}
+
+	spin_lock_bh(&htt->tx_lock);
+	msdu_id = ath10k_htt_tx_alloc_msdu_id(htt);
+	if (msdu_id < 0) {
+		spin_unlock_bh(&htt->tx_lock);
+		res = msdu_id;
+		goto err;
+	}
+	htt->pending_tx[msdu_id] = txdesc;
+	spin_unlock_bh(&htt->tx_lock);
+
+	res = ath10k_skb_map(dev, msdu);
+	if (res)
+		goto err;
+
+	/* tx fragment list must be terminated with zero-entry */
+	skb_put(txfrag, frag_len);
+	tx_frags = (struct htt_data_tx_desc_frag *)txfrag->data;
+	tx_frags[0].paddr = __cpu_to_le32(ATH10K_SKB_CB(msdu)->paddr);
+	tx_frags[0].len   = __cpu_to_le32(msdu->len);
+	tx_frags[1].paddr = __cpu_to_le32(0);
+	tx_frags[1].len   = __cpu_to_le32(0);
+
+	res = ath10k_skb_map(dev, txfrag);
+	if (res)
+		goto err;
+
+	ath10k_dbg(ATH10K_DBG_HTT, "txfrag 0x%llx msdu 0x%llx\n",
+		   (unsigned long long) ATH10K_SKB_CB(txfrag)->paddr,
+		   (unsigned long long) ATH10K_SKB_CB(msdu)->paddr);
+	ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "txfrag: ",
+			txfrag->data, frag_len);
+	ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "msdu: ",
+			msdu->data, msdu->len);
+
+	skb_put(txdesc, desc_len);
+	cmd = (struct htt_cmd *)txdesc->data;
+	memset(cmd, 0, desc_len);
+
+	tid = ATH10K_SKB_CB(msdu)->htt.tid;
+
+	ath10k_dbg(ATH10K_DBG_HTT, "htt data tx using tid %hhu\n", tid);
+
+	flags0  = 0;
+	if (!ieee80211_has_protected(hdr->frame_control))
+		flags0 |= HTT_DATA_TX_DESC_FLAGS0_NO_ENCRYPT;
+	flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT;
+	flags0 |= SM(ATH10K_HW_TXRX_NATIVE_WIFI,
+		     HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE);
+
+	flags1  = 0;
+	flags1 |= SM((u16)vdev_id, HTT_DATA_TX_DESC_FLAGS1_VDEV_ID);
+	flags1 |= SM((u16)tid, HTT_DATA_TX_DESC_FLAGS1_EXT_TID);
+
+	frags_paddr = ATH10K_SKB_CB(txfrag)->paddr;
+
+	cmd->hdr.msg_type        = HTT_H2T_MSG_TYPE_TX_FRM;
+	cmd->data_tx.flags0      = flags0;
+	cmd->data_tx.flags1      = __cpu_to_le16(flags1);
+	cmd->data_tx.len         = __cpu_to_le16(msdu->len);
+	cmd->data_tx.id          = __cpu_to_le16(msdu_id);
+	cmd->data_tx.frags_paddr = __cpu_to_le32(frags_paddr);
+	cmd->data_tx.peerid      = __cpu_to_le32(HTT_INVALID_PEERID);
+
+	memcpy(cmd->data_tx.prefetch, msdu->data, prefetch_len);
+
+	/* refcount is decremented by HTC and HTT completions until it reaches
+	 * zero and is freed */
+	skb_cb = ATH10K_SKB_CB(txdesc);
+	skb_cb->htt.msdu_id = msdu_id;
+	skb_cb->htt.refcount = 2;
+	skb_cb->htt.txfrag = txfrag;
+	skb_cb->htt.msdu = msdu;
+
+	res = ath10k_htc_send(htt->ar->htc, htt->eid, txdesc);
+	if (res)
+		goto err;
+
+	return 0;
+err:
+	if (txfrag)
+		ath10k_skb_unmap(dev, txfrag);
+	if (txdesc)
+		dev_kfree_skb_any(txdesc);
+	if (txfrag)
+		dev_kfree_skb_any(txfrag);
+	if (msdu_id >= 0) {
+		spin_lock_bh(&htt->tx_lock);
+		htt->pending_tx[msdu_id] = NULL;
+		ath10k_htt_tx_free_msdu_id(htt, msdu_id);
+		spin_unlock_bh(&htt->tx_lock);
+	}
+	ath10k_htt_tx_dec_pending(htt);
+	ath10k_skb_unmap(dev, msdu);
+	return res;
+}
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
new file mode 100644
index 000000000000..44ed5af0a204
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -0,0 +1,304 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _HW_H_
+#define _HW_H_
+
+#include "targaddrs.h"
+
+/* Supported FW version */
+#define SUPPORTED_FW_MAJOR	1
+#define SUPPORTED_FW_MINOR	0
+#define SUPPORTED_FW_RELEASE	0
+#define SUPPORTED_FW_BUILD	629
+
+/* QCA988X 1.0 definitions */
+#define QCA988X_HW_1_0_VERSION		0x4000002c
+#define QCA988X_HW_1_0_FW_DIR		"ath10k/QCA988X/hw1.0"
+#define QCA988X_HW_1_0_FW_FILE		"firmware.bin"
+#define QCA988X_HW_1_0_OTP_FILE		"otp.bin"
+#define QCA988X_HW_1_0_BOARD_DATA_FILE	"board.bin"
+#define QCA988X_HW_1_0_PATCH_LOAD_ADDR	0x1234
+
+/* QCA988X 2.0 definitions */
+#define QCA988X_HW_2_0_VERSION		0x4100016c
+#define QCA988X_HW_2_0_FW_DIR		"ath10k/QCA988X/hw2.0"
+#define QCA988X_HW_2_0_FW_FILE		"firmware.bin"
+#define QCA988X_HW_2_0_OTP_FILE		"otp.bin"
+#define QCA988X_HW_2_0_BOARD_DATA_FILE	"board.bin"
+#define QCA988X_HW_2_0_PATCH_LOAD_ADDR	0x1234
+
+/* Known pecularities:
+ *  - current FW doesn't support raw rx mode (last tested v599)
+ *  - current FW dumps upon raw tx mode (last tested v599)
+ *  - raw appears in nwifi decap, raw and nwifi appear in ethernet decap
+ *  - raw have FCS, nwifi doesn't
+ *  - ethernet frames have 802.11 header decapped and parts (base hdr, cipher
+ *    param, llc/snap) are aligned to 4byte boundaries each */
+enum ath10k_hw_txrx_mode {
+	ATH10K_HW_TXRX_RAW = 0,
+	ATH10K_HW_TXRX_NATIVE_WIFI = 1,
+	ATH10K_HW_TXRX_ETHERNET = 2,
+};
+
+enum ath10k_mcast2ucast_mode {
+	ATH10K_MCAST2UCAST_DISABLED = 0,
+	ATH10K_MCAST2UCAST_ENABLED = 1,
+};
+
+#define TARGET_NUM_VDEVS			8
+#define TARGET_NUM_PEER_AST			2
+#define TARGET_NUM_WDS_ENTRIES			32
+#define TARGET_DMA_BURST_SIZE			0
+#define TARGET_MAC_AGGR_DELIM			0
+#define TARGET_AST_SKID_LIMIT			16
+#define TARGET_NUM_PEERS			16
+#define TARGET_NUM_OFFLOAD_PEERS		0
+#define TARGET_NUM_OFFLOAD_REORDER_BUFS         0
+#define TARGET_NUM_PEER_KEYS			2
+#define TARGET_NUM_TIDS		(2 * ((TARGET_NUM_PEERS) + (TARGET_NUM_VDEVS)))
+#define TARGET_TX_CHAIN_MASK			(BIT(0) | BIT(1) | BIT(2))
+#define TARGET_RX_CHAIN_MASK			(BIT(0) | BIT(1) | BIT(2))
+#define TARGET_RX_TIMEOUT_LO_PRI		100
+#define TARGET_RX_TIMEOUT_HI_PRI		40
+#define TARGET_RX_DECAP_MODE			ATH10K_HW_TXRX_ETHERNET
+#define TARGET_SCAN_MAX_PENDING_REQS		4
+#define TARGET_BMISS_OFFLOAD_MAX_VDEV		3
+#define TARGET_ROAM_OFFLOAD_MAX_VDEV		3
+#define TARGET_ROAM_OFFLOAD_MAX_AP_PROFILES	8
+#define TARGET_GTK_OFFLOAD_MAX_VDEV		3
+#define TARGET_NUM_MCAST_GROUPS			0
+#define TARGET_NUM_MCAST_TABLE_ELEMS		0
+#define TARGET_MCAST2UCAST_MODE			ATH10K_MCAST2UCAST_DISABLED
+#define TARGET_TX_DBG_LOG_SIZE			1024
+#define TARGET_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 0
+#define TARGET_VOW_CONFIG			0
+#define TARGET_NUM_MSDU_DESC			(1024 + 400)
+#define TARGET_MAX_FRAG_ENTRIES			0
+
+
+/* Number of Copy Engines supported */
+#define CE_COUNT 8
+
+/*
+ * Total number of PCIe MSI interrupts requested for all interrupt sources.
+ * PCIe standard forces this to be a power of 2.
+ * Some Host OS's limit MSI requests that can be granted to 8
+ * so for now we abide by this limit and avoid requesting more
+ * than that.
+ */
+#define MSI_NUM_REQUEST_LOG2	3
+#define MSI_NUM_REQUEST		(1<<MSI_NUM_REQUEST_LOG2)
+
+/*
+ * Granted MSIs are assigned as follows:
+ * Firmware uses the first
+ * Remaining MSIs, if any, are used by Copy Engines
+ * This mapping is known to both Target firmware and Host software.
+ * It may be changed as long as Host and Target are kept in sync.
+ */
+/* MSI for firmware (errors, etc.) */
+#define MSI_ASSIGN_FW		0
+
+/* MSIs for Copy Engines */
+#define MSI_ASSIGN_CE_INITIAL	1
+#define MSI_ASSIGN_CE_MAX	7
+
+/* as of IP3.7.1 */
+#define RTC_STATE_V_ON				3
+
+#define RTC_STATE_COLD_RESET_MASK		0x00000400
+#define RTC_STATE_V_LSB				0
+#define RTC_STATE_V_MASK			0x00000007
+#define RTC_STATE_ADDRESS			0x0000
+#define PCIE_SOC_WAKE_V_MASK			0x00000001
+#define PCIE_SOC_WAKE_ADDRESS			0x0004
+#define PCIE_SOC_WAKE_RESET			0x00000000
+#define SOC_GLOBAL_RESET_ADDRESS		0x0008
+
+#define RTC_SOC_BASE_ADDRESS			0x00004000
+#define RTC_WMAC_BASE_ADDRESS			0x00005000
+#define MAC_COEX_BASE_ADDRESS			0x00006000
+#define BT_COEX_BASE_ADDRESS			0x00007000
+#define SOC_PCIE_BASE_ADDRESS			0x00008000
+#define SOC_CORE_BASE_ADDRESS			0x00009000
+#define WLAN_UART_BASE_ADDRESS			0x0000c000
+#define WLAN_SI_BASE_ADDRESS			0x00010000
+#define WLAN_GPIO_BASE_ADDRESS			0x00014000
+#define WLAN_ANALOG_INTF_BASE_ADDRESS		0x0001c000
+#define WLAN_MAC_BASE_ADDRESS			0x00020000
+#define EFUSE_BASE_ADDRESS			0x00030000
+#define FPGA_REG_BASE_ADDRESS			0x00039000
+#define WLAN_UART2_BASE_ADDRESS			0x00054c00
+#define CE_WRAPPER_BASE_ADDRESS			0x00057000
+#define CE0_BASE_ADDRESS			0x00057400
+#define CE1_BASE_ADDRESS			0x00057800
+#define CE2_BASE_ADDRESS			0x00057c00
+#define CE3_BASE_ADDRESS			0x00058000
+#define CE4_BASE_ADDRESS			0x00058400
+#define CE5_BASE_ADDRESS			0x00058800
+#define CE6_BASE_ADDRESS			0x00058c00
+#define CE7_BASE_ADDRESS			0x00059000
+#define DBI_BASE_ADDRESS			0x00060000
+#define WLAN_ANALOG_INTF_PCIE_BASE_ADDRESS	0x0006c000
+#define PCIE_LOCAL_BASE_ADDRESS			0x00080000
+
+#define SOC_RESET_CONTROL_OFFSET		0x00000000
+#define SOC_RESET_CONTROL_SI0_RST_MASK		0x00000001
+#define SOC_CPU_CLOCK_OFFSET			0x00000020
+#define SOC_CPU_CLOCK_STANDARD_LSB		0
+#define SOC_CPU_CLOCK_STANDARD_MASK		0x00000003
+#define SOC_CLOCK_CONTROL_OFFSET		0x00000028
+#define SOC_CLOCK_CONTROL_SI0_CLK_MASK		0x00000001
+#define SOC_SYSTEM_SLEEP_OFFSET			0x000000c4
+#define SOC_LPO_CAL_OFFSET			0x000000e0
+#define SOC_LPO_CAL_ENABLE_LSB			20
+#define SOC_LPO_CAL_ENABLE_MASK			0x00100000
+
+#define WLAN_RESET_CONTROL_COLD_RST_MASK	0x00000008
+#define WLAN_RESET_CONTROL_WARM_RST_MASK	0x00000004
+#define WLAN_SYSTEM_SLEEP_DISABLE_LSB		0
+#define WLAN_SYSTEM_SLEEP_DISABLE_MASK		0x00000001
+
+#define WLAN_GPIO_PIN0_ADDRESS			0x00000028
+#define WLAN_GPIO_PIN0_CONFIG_MASK		0x00007800
+#define WLAN_GPIO_PIN1_ADDRESS			0x0000002c
+#define WLAN_GPIO_PIN1_CONFIG_MASK		0x00007800
+#define WLAN_GPIO_PIN10_ADDRESS			0x00000050
+#define WLAN_GPIO_PIN11_ADDRESS			0x00000054
+#define WLAN_GPIO_PIN12_ADDRESS			0x00000058
+#define WLAN_GPIO_PIN13_ADDRESS			0x0000005c
+
+#define CLOCK_GPIO_OFFSET			0xffffffff
+#define CLOCK_GPIO_BT_CLK_OUT_EN_LSB		0
+#define CLOCK_GPIO_BT_CLK_OUT_EN_MASK		0
+
+#define SI_CONFIG_OFFSET			0x00000000
+#define SI_CONFIG_BIDIR_OD_DATA_LSB		18
+#define SI_CONFIG_BIDIR_OD_DATA_MASK		0x00040000
+#define SI_CONFIG_I2C_LSB			16
+#define SI_CONFIG_I2C_MASK			0x00010000
+#define SI_CONFIG_POS_SAMPLE_LSB		7
+#define SI_CONFIG_POS_SAMPLE_MASK		0x00000080
+#define SI_CONFIG_INACTIVE_DATA_LSB		5
+#define SI_CONFIG_INACTIVE_DATA_MASK		0x00000020
+#define SI_CONFIG_INACTIVE_CLK_LSB		4
+#define SI_CONFIG_INACTIVE_CLK_MASK		0x00000010
+#define SI_CONFIG_DIVIDER_LSB			0
+#define SI_CONFIG_DIVIDER_MASK			0x0000000f
+#define SI_CS_OFFSET				0x00000004
+#define SI_CS_DONE_ERR_MASK			0x00000400
+#define SI_CS_DONE_INT_MASK			0x00000200
+#define SI_CS_START_LSB				8
+#define SI_CS_START_MASK			0x00000100
+#define SI_CS_RX_CNT_LSB			4
+#define SI_CS_RX_CNT_MASK			0x000000f0
+#define SI_CS_TX_CNT_LSB			0
+#define SI_CS_TX_CNT_MASK			0x0000000f
+
+#define SI_TX_DATA0_OFFSET			0x00000008
+#define SI_TX_DATA1_OFFSET			0x0000000c
+#define SI_RX_DATA0_OFFSET			0x00000010
+#define SI_RX_DATA1_OFFSET			0x00000014
+
+#define CORE_CTRL_CPU_INTR_MASK			0x00002000
+#define CORE_CTRL_ADDRESS			0x0000
+#define PCIE_INTR_ENABLE_ADDRESS		0x0008
+#define PCIE_INTR_CLR_ADDRESS			0x0014
+#define SCRATCH_3_ADDRESS			0x0030
+
+/* Firmware indications to the Host via SCRATCH_3 register. */
+#define FW_INDICATOR_ADDRESS	(SOC_CORE_BASE_ADDRESS + SCRATCH_3_ADDRESS)
+#define FW_IND_EVENT_PENDING			1
+#define FW_IND_INITIALIZED			2
+
+/* HOST_REG interrupt from firmware */
+#define PCIE_INTR_FIRMWARE_MASK			0x00000400
+#define PCIE_INTR_CE_MASK_ALL			0x0007f800
+
+#define DRAM_BASE_ADDRESS			0x00400000
+
+#define MISSING 0
+
+#define SYSTEM_SLEEP_OFFSET			SOC_SYSTEM_SLEEP_OFFSET
+#define WLAN_SYSTEM_SLEEP_OFFSET		SOC_SYSTEM_SLEEP_OFFSET
+#define WLAN_RESET_CONTROL_OFFSET		SOC_RESET_CONTROL_OFFSET
+#define CLOCK_CONTROL_OFFSET			SOC_CLOCK_CONTROL_OFFSET
+#define CLOCK_CONTROL_SI0_CLK_MASK		SOC_CLOCK_CONTROL_SI0_CLK_MASK
+#define RESET_CONTROL_MBOX_RST_MASK		MISSING
+#define RESET_CONTROL_SI0_RST_MASK		SOC_RESET_CONTROL_SI0_RST_MASK
+#define GPIO_BASE_ADDRESS			WLAN_GPIO_BASE_ADDRESS
+#define GPIO_PIN0_OFFSET			WLAN_GPIO_PIN0_ADDRESS
+#define GPIO_PIN1_OFFSET			WLAN_GPIO_PIN1_ADDRESS
+#define GPIO_PIN0_CONFIG_MASK			WLAN_GPIO_PIN0_CONFIG_MASK
+#define GPIO_PIN1_CONFIG_MASK			WLAN_GPIO_PIN1_CONFIG_MASK
+#define SI_BASE_ADDRESS				WLAN_SI_BASE_ADDRESS
+#define SCRATCH_BASE_ADDRESS			SOC_CORE_BASE_ADDRESS
+#define LOCAL_SCRATCH_OFFSET			0x18
+#define CPU_CLOCK_OFFSET			SOC_CPU_CLOCK_OFFSET
+#define LPO_CAL_OFFSET				SOC_LPO_CAL_OFFSET
+#define GPIO_PIN10_OFFSET			WLAN_GPIO_PIN10_ADDRESS
+#define GPIO_PIN11_OFFSET			WLAN_GPIO_PIN11_ADDRESS
+#define GPIO_PIN12_OFFSET			WLAN_GPIO_PIN12_ADDRESS
+#define GPIO_PIN13_OFFSET			WLAN_GPIO_PIN13_ADDRESS
+#define CPU_CLOCK_STANDARD_LSB			SOC_CPU_CLOCK_STANDARD_LSB
+#define CPU_CLOCK_STANDARD_MASK			SOC_CPU_CLOCK_STANDARD_MASK
+#define LPO_CAL_ENABLE_LSB			SOC_LPO_CAL_ENABLE_LSB
+#define LPO_CAL_ENABLE_MASK			SOC_LPO_CAL_ENABLE_MASK
+#define ANALOG_INTF_BASE_ADDRESS		WLAN_ANALOG_INTF_BASE_ADDRESS
+#define MBOX_BASE_ADDRESS			MISSING
+#define INT_STATUS_ENABLE_ERROR_LSB		MISSING
+#define INT_STATUS_ENABLE_ERROR_MASK		MISSING
+#define INT_STATUS_ENABLE_CPU_LSB		MISSING
+#define INT_STATUS_ENABLE_CPU_MASK		MISSING
+#define INT_STATUS_ENABLE_COUNTER_LSB		MISSING
+#define INT_STATUS_ENABLE_COUNTER_MASK		MISSING
+#define INT_STATUS_ENABLE_MBOX_DATA_LSB		MISSING
+#define INT_STATUS_ENABLE_MBOX_DATA_MASK	MISSING
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB	MISSING
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK	MISSING
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB	MISSING
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK	MISSING
+#define COUNTER_INT_STATUS_ENABLE_BIT_LSB	MISSING
+#define COUNTER_INT_STATUS_ENABLE_BIT_MASK	MISSING
+#define INT_STATUS_ENABLE_ADDRESS		MISSING
+#define CPU_INT_STATUS_ENABLE_BIT_LSB		MISSING
+#define CPU_INT_STATUS_ENABLE_BIT_MASK		MISSING
+#define HOST_INT_STATUS_ADDRESS			MISSING
+#define CPU_INT_STATUS_ADDRESS			MISSING
+#define ERROR_INT_STATUS_ADDRESS		MISSING
+#define ERROR_INT_STATUS_WAKEUP_MASK		MISSING
+#define ERROR_INT_STATUS_WAKEUP_LSB		MISSING
+#define ERROR_INT_STATUS_RX_UNDERFLOW_MASK	MISSING
+#define ERROR_INT_STATUS_RX_UNDERFLOW_LSB	MISSING
+#define ERROR_INT_STATUS_TX_OVERFLOW_MASK	MISSING
+#define ERROR_INT_STATUS_TX_OVERFLOW_LSB	MISSING
+#define COUNT_DEC_ADDRESS			MISSING
+#define HOST_INT_STATUS_CPU_MASK		MISSING
+#define HOST_INT_STATUS_CPU_LSB			MISSING
+#define HOST_INT_STATUS_ERROR_MASK		MISSING
+#define HOST_INT_STATUS_ERROR_LSB		MISSING
+#define HOST_INT_STATUS_COUNTER_MASK		MISSING
+#define HOST_INT_STATUS_COUNTER_LSB		MISSING
+#define RX_LOOKAHEAD_VALID_ADDRESS		MISSING
+#define WINDOW_DATA_ADDRESS			MISSING
+#define WINDOW_READ_ADDR_ADDRESS		MISSING
+#define WINDOW_WRITE_ADDR_ADDRESS		MISSING
+
+#define RTC_STATE_V_GET(x) (((x) & RTC_STATE_V_MASK) >> RTC_STATE_V_LSB)
+
+#endif /* _HW_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
new file mode 100644
index 000000000000..1285554a1025
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -0,0 +1,3066 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "mac.h"
+
+#include <net/mac80211.h>
+#include <linux/etherdevice.h>
+
+#include "core.h"
+#include "debug.h"
+#include "wmi.h"
+#include "htt.h"
+#include "txrx.h"
+
+/**********/
+/* Crypto */
+/**********/
+
+static int ath10k_send_key(struct ath10k_vif *arvif,
+			   struct ieee80211_key_conf *key,
+			   enum set_key_cmd cmd,
+			   const u8 *macaddr)
+{
+	struct wmi_vdev_install_key_arg arg = {
+		.vdev_id = arvif->vdev_id,
+		.key_idx = key->keyidx,
+		.key_len = key->keylen,
+		.key_data = key->key,
+		.macaddr = macaddr,
+	};
+
+	if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+		arg.key_flags = WMI_KEY_PAIRWISE;
+	else
+		arg.key_flags = WMI_KEY_GROUP;
+
+	switch (key->cipher) {
+	case WLAN_CIPHER_SUITE_CCMP:
+		arg.key_cipher = WMI_CIPHER_AES_CCM;
+		key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX;
+		break;
+	case WLAN_CIPHER_SUITE_TKIP:
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+		arg.key_cipher = WMI_CIPHER_TKIP;
+		arg.key_txmic_len = 8;
+		arg.key_rxmic_len = 8;
+		break;
+	case WLAN_CIPHER_SUITE_WEP40:
+	case WLAN_CIPHER_SUITE_WEP104:
+		arg.key_cipher = WMI_CIPHER_WEP;
+		/* AP/IBSS mode requires self-key to be groupwise
+		 * Otherwise pairwise key must be set */
+		if (memcmp(macaddr, arvif->vif->addr, ETH_ALEN))
+			arg.key_flags = WMI_KEY_PAIRWISE;
+		break;
+	default:
+		ath10k_warn("cipher %d is not supported\n", key->cipher);
+		return -EOPNOTSUPP;
+	}
+
+	if (cmd == DISABLE_KEY) {
+		arg.key_cipher = WMI_CIPHER_NONE;
+		arg.key_data = NULL;
+	}
+
+	return ath10k_wmi_vdev_install_key(arvif->ar, &arg);
+}
+
+static int ath10k_install_key(struct ath10k_vif *arvif,
+			      struct ieee80211_key_conf *key,
+			      enum set_key_cmd cmd,
+			      const u8 *macaddr)
+{
+	struct ath10k *ar = arvif->ar;
+	int ret;
+
+	INIT_COMPLETION(ar->install_key_done);
+
+	ret = ath10k_send_key(arvif, key, cmd, macaddr);
+	if (ret)
+		return ret;
+
+	ret = wait_for_completion_timeout(&ar->install_key_done, 3*HZ);
+	if (ret == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif,
+					const u8 *addr)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ath10k_peer *peer;
+	int ret;
+	int i;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
+	spin_unlock_bh(&ar->data_lock);
+
+	if (!peer)
+		return -ENOENT;
+
+	for (i = 0; i < ARRAY_SIZE(arvif->wep_keys); i++) {
+		if (arvif->wep_keys[i] == NULL)
+			continue;
+
+		ret = ath10k_install_key(arvif, arvif->wep_keys[i], SET_KEY,
+					 addr);
+		if (ret)
+			return ret;
+
+		peer->keys[i] = arvif->wep_keys[i];
+	}
+
+	return 0;
+}
+
+static int ath10k_clear_peer_keys(struct ath10k_vif *arvif,
+				  const u8 *addr)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ath10k_peer *peer;
+	int first_errno = 0;
+	int ret;
+	int i;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
+	spin_unlock_bh(&ar->data_lock);
+
+	if (!peer)
+		return -ENOENT;
+
+	for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+		if (peer->keys[i] == NULL)
+			continue;
+
+		ret = ath10k_install_key(arvif, peer->keys[i],
+					 DISABLE_KEY, addr);
+		if (ret && first_errno == 0)
+			first_errno = ret;
+
+		if (ret)
+			ath10k_warn("could not remove peer wep key %d (%d)\n",
+				    i, ret);
+
+		peer->keys[i] = NULL;
+	}
+
+	return first_errno;
+}
+
+static int ath10k_clear_vdev_key(struct ath10k_vif *arvif,
+				 struct ieee80211_key_conf *key)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ath10k_peer *peer;
+	u8 addr[ETH_ALEN];
+	int first_errno = 0;
+	int ret;
+	int i;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	for (;;) {
+		/* since ath10k_install_key we can't hold data_lock all the
+		 * time, so we try to remove the keys incrementally */
+		spin_lock_bh(&ar->data_lock);
+		i = 0;
+		list_for_each_entry(peer, &ar->peers, list) {
+			for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+				if (peer->keys[i] == key) {
+					memcpy(addr, peer->addr, ETH_ALEN);
+					peer->keys[i] = NULL;
+					break;
+				}
+			}
+
+			if (i < ARRAY_SIZE(peer->keys))
+				break;
+		}
+		spin_unlock_bh(&ar->data_lock);
+
+		if (i == ARRAY_SIZE(peer->keys))
+			break;
+
+		ret = ath10k_install_key(arvif, key, DISABLE_KEY, addr);
+		if (ret && first_errno == 0)
+			first_errno = ret;
+
+		if (ret)
+			ath10k_warn("could not remove key for %pM\n", addr);
+	}
+
+	return first_errno;
+}
+
+
+/*********************/
+/* General utilities */
+/*********************/
+
+static inline enum wmi_phy_mode
+chan_to_phymode(const struct cfg80211_chan_def *chandef)
+{
+	enum wmi_phy_mode phymode = MODE_UNKNOWN;
+
+	switch (chandef->chan->band) {
+	case IEEE80211_BAND_2GHZ:
+		switch (chandef->width) {
+		case NL80211_CHAN_WIDTH_20_NOHT:
+			phymode = MODE_11G;
+			break;
+		case NL80211_CHAN_WIDTH_20:
+			phymode = MODE_11NG_HT20;
+			break;
+		case NL80211_CHAN_WIDTH_40:
+			phymode = MODE_11NG_HT40;
+			break;
+		case NL80211_CHAN_WIDTH_80:
+		case NL80211_CHAN_WIDTH_80P80:
+		case NL80211_CHAN_WIDTH_160:
+			phymode = MODE_UNKNOWN;
+			break;
+		}
+		break;
+	case IEEE80211_BAND_5GHZ:
+		switch (chandef->width) {
+		case NL80211_CHAN_WIDTH_20_NOHT:
+			phymode = MODE_11A;
+			break;
+		case NL80211_CHAN_WIDTH_20:
+			phymode = MODE_11NA_HT20;
+			break;
+		case NL80211_CHAN_WIDTH_40:
+			phymode = MODE_11NA_HT40;
+			break;
+		case NL80211_CHAN_WIDTH_80:
+			phymode = MODE_11AC_VHT80;
+			break;
+		case NL80211_CHAN_WIDTH_80P80:
+		case NL80211_CHAN_WIDTH_160:
+			phymode = MODE_UNKNOWN;
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	WARN_ON(phymode == MODE_UNKNOWN);
+	return phymode;
+}
+
+static u8 ath10k_parse_mpdudensity(u8 mpdudensity)
+{
+/*
+ * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
+ *   0 for no restriction
+ *   1 for 1/4 us
+ *   2 for 1/2 us
+ *   3 for 1 us
+ *   4 for 2 us
+ *   5 for 4 us
+ *   6 for 8 us
+ *   7 for 16 us
+ */
+	switch (mpdudensity) {
+	case 0:
+		return 0;
+	case 1:
+	case 2:
+	case 3:
+	/* Our lower layer calculations limit our precision to
+	   1 microsecond */
+		return 1;
+	case 4:
+		return 2;
+	case 5:
+		return 4;
+	case 6:
+		return 8;
+	case 7:
+		return 16;
+	default:
+		return 0;
+	}
+}
+
+static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_wmi_peer_create(ar, vdev_id, addr);
+	if (ret)
+		return ret;
+
+	ret = ath10k_wait_for_peer_created(ar, vdev_id, addr);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_wmi_peer_delete(ar, vdev_id, addr);
+	if (ret)
+		return ret;
+
+	ret = ath10k_wait_for_peer_deleted(ar, vdev_id, addr);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void ath10k_peer_cleanup(struct ath10k *ar, u32 vdev_id)
+{
+	struct ath10k_peer *peer, *tmp;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	list_for_each_entry_safe(peer, tmp, &ar->peers, list) {
+		if (peer->vdev_id != vdev_id)
+			continue;
+
+		ath10k_warn("removing stale peer %pM from vdev_id %d\n",
+			    peer->addr, vdev_id);
+
+		list_del(&peer->list);
+		kfree(peer);
+	}
+	spin_unlock_bh(&ar->data_lock);
+}
+
+/************************/
+/* Interface management */
+/************************/
+
+static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
+{
+	int ret;
+
+	ret = wait_for_completion_timeout(&ar->vdev_setup_done,
+					  ATH10K_VDEV_SETUP_TIMEOUT_HZ);
+	if (ret == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int ath10k_vdev_start(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ieee80211_conf *conf = &ar->hw->conf;
+	struct ieee80211_channel *channel = conf->chandef.chan;
+	struct wmi_vdev_start_request_arg arg = {};
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	INIT_COMPLETION(ar->vdev_setup_done);
+
+	arg.vdev_id = arvif->vdev_id;
+	arg.dtim_period = arvif->dtim_period;
+	arg.bcn_intval = arvif->beacon_interval;
+
+	arg.channel.freq = channel->center_freq;
+
+	arg.channel.band_center_freq1 = conf->chandef.center_freq1;
+
+	arg.channel.mode = chan_to_phymode(&conf->chandef);
+
+	arg.channel.min_power = channel->max_power * 3;
+	arg.channel.max_power = channel->max_power * 4;
+	arg.channel.max_reg_power = channel->max_reg_power * 4;
+	arg.channel.max_antenna_gain = channel->max_antenna_gain;
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+		arg.ssid = arvif->u.ap.ssid;
+		arg.ssid_len = arvif->u.ap.ssid_len;
+		arg.hidden_ssid = arvif->u.ap.hidden_ssid;
+	} else if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
+		arg.ssid = arvif->vif->bss_conf.ssid;
+		arg.ssid_len = arvif->vif->bss_conf.ssid_len;
+	}
+
+	ret = ath10k_wmi_vdev_start(ar, &arg);
+	if (ret) {
+		ath10k_warn("WMI vdev start failed: ret %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_vdev_setup_sync(ar);
+	if (ret) {
+		ath10k_warn("vdev setup failed %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int ath10k_vdev_stop(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	INIT_COMPLETION(ar->vdev_setup_done);
+
+	ret = ath10k_wmi_vdev_stop(ar, arvif->vdev_id);
+	if (ret) {
+		ath10k_warn("WMI vdev stop failed: ret %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_vdev_setup_sync(ar);
+	if (ret) {
+		ath10k_warn("vdev setup failed %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int ath10k_monitor_start(struct ath10k *ar, int vdev_id)
+{
+	struct ieee80211_channel *channel = ar->hw->conf.chandef.chan;
+	struct wmi_vdev_start_request_arg arg = {};
+	enum nl80211_channel_type type;
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	type = cfg80211_get_chandef_type(&ar->hw->conf.chandef);
+
+	arg.vdev_id = vdev_id;
+	arg.channel.freq = channel->center_freq;
+	arg.channel.band_center_freq1 = ar->hw->conf.chandef.center_freq1;
+
+	/* TODO setup this dynamically, what in case we
+	   don't have any vifs? */
+	arg.channel.mode = chan_to_phymode(&ar->hw->conf.chandef);
+
+	arg.channel.min_power = channel->max_power * 3;
+	arg.channel.max_power = channel->max_power * 4;
+	arg.channel.max_reg_power = channel->max_reg_power * 4;
+	arg.channel.max_antenna_gain = channel->max_antenna_gain;
+
+	ret = ath10k_wmi_vdev_start(ar, &arg);
+	if (ret) {
+		ath10k_warn("Monitor vdev start failed: ret %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_vdev_setup_sync(ar);
+	if (ret) {
+		ath10k_warn("Monitor vdev setup failed %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_wmi_vdev_up(ar, vdev_id, 0, ar->mac_addr);
+	if (ret) {
+		ath10k_warn("Monitor vdev up failed: %d\n", ret);
+		goto vdev_stop;
+	}
+
+	ar->monitor_vdev_id = vdev_id;
+	ar->monitor_enabled = true;
+
+	return 0;
+
+vdev_stop:
+	ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
+	if (ret)
+		ath10k_warn("Monitor vdev stop failed: %d\n", ret);
+
+	return ret;
+}
+
+static int ath10k_monitor_stop(struct ath10k *ar)
+{
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	/* For some reasons, ath10k_wmi_vdev_down() here couse
+	 * often ath10k_wmi_vdev_stop() to fail. Next we could
+	 * not run monitor vdev and driver reload
+	 * required. Don't see such problems we skip
+	 * ath10k_wmi_vdev_down() here.
+	 */
+
+	ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
+	if (ret)
+		ath10k_warn("Monitor vdev stop failed: %d\n", ret);
+
+	ret = ath10k_vdev_setup_sync(ar);
+	if (ret)
+		ath10k_warn("Monitor_down sync failed: %d\n", ret);
+
+	ar->monitor_enabled = false;
+	return ret;
+}
+
+static int ath10k_monitor_create(struct ath10k *ar)
+{
+	int bit, ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (ar->monitor_present) {
+		ath10k_warn("Monitor mode already enabled\n");
+		return 0;
+	}
+
+	bit = ffs(ar->free_vdev_map);
+	if (bit == 0) {
+		ath10k_warn("No free VDEV slots\n");
+		return -ENOMEM;
+	}
+
+	ar->monitor_vdev_id = bit - 1;
+	ar->free_vdev_map &= ~(1 << ar->monitor_vdev_id);
+
+	ret = ath10k_wmi_vdev_create(ar, ar->monitor_vdev_id,
+				     WMI_VDEV_TYPE_MONITOR,
+				     0, ar->mac_addr);
+	if (ret) {
+		ath10k_warn("WMI vdev monitor create failed: ret %d\n", ret);
+		goto vdev_fail;
+	}
+
+	ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface created, vdev id: %d\n",
+		   ar->monitor_vdev_id);
+
+	ar->monitor_present = true;
+	return 0;
+
+vdev_fail:
+	/*
+	 * Restore the ID to the global map.
+	 */
+	ar->free_vdev_map |= 1 << (ar->monitor_vdev_id);
+	return ret;
+}
+
+static int ath10k_monitor_destroy(struct ath10k *ar)
+{
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (!ar->monitor_present)
+		return 0;
+
+	ret = ath10k_wmi_vdev_delete(ar, ar->monitor_vdev_id);
+	if (ret) {
+		ath10k_warn("WMI vdev monitor delete failed: %d\n", ret);
+		return ret;
+	}
+
+	ar->free_vdev_map |= 1 << (ar->monitor_vdev_id);
+	ar->monitor_present = false;
+
+	ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface destroyed, vdev id: %d\n",
+		   ar->monitor_vdev_id);
+	return ret;
+}
+
+static void ath10k_control_beaconing(struct ath10k_vif *arvif,
+				struct ieee80211_bss_conf *info)
+{
+	int ret = 0;
+
+	if (!info->enable_beacon) {
+		ath10k_vdev_stop(arvif);
+		return;
+	}
+
+	arvif->tx_seq_no = 0x1000;
+
+	ret = ath10k_vdev_start(arvif);
+	if (ret)
+		return;
+
+	ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, 0, info->bssid);
+	if (ret) {
+		ath10k_warn("Failed to bring up VDEV: %d\n",
+			    arvif->vdev_id);
+		return;
+	}
+	ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d up\n", arvif->vdev_id);
+}
+
+static void ath10k_control_ibss(struct ath10k_vif *arvif,
+				struct ieee80211_bss_conf *info,
+				const u8 self_peer[ETH_ALEN])
+{
+	int ret = 0;
+
+	if (!info->ibss_joined) {
+		ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, self_peer);
+		if (ret)
+			ath10k_warn("Failed to delete IBSS self peer:%pM for VDEV:%d ret:%d\n",
+				    self_peer, arvif->vdev_id, ret);
+
+		if (is_zero_ether_addr(arvif->u.ibss.bssid))
+			return;
+
+		ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id,
+					 arvif->u.ibss.bssid);
+		if (ret) {
+			ath10k_warn("Failed to delete IBSS BSSID peer:%pM for VDEV:%d ret:%d\n",
+				    arvif->u.ibss.bssid, arvif->vdev_id, ret);
+			return;
+		}
+
+		memset(arvif->u.ibss.bssid, 0, ETH_ALEN);
+
+		return;
+	}
+
+	ret = ath10k_peer_create(arvif->ar, arvif->vdev_id, self_peer);
+	if (ret) {
+		ath10k_warn("Failed to create IBSS self peer:%pM for VDEV:%d ret:%d\n",
+			    self_peer, arvif->vdev_id, ret);
+		return;
+	}
+
+	ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id,
+					WMI_VDEV_PARAM_ATIM_WINDOW,
+					ATH10K_DEFAULT_ATIM);
+	if (ret)
+		ath10k_warn("Failed to set IBSS ATIM for VDEV:%d ret:%d\n",
+			    arvif->vdev_id, ret);
+}
+
+/*
+ * Review this when mac80211 gains per-interface powersave support.
+ */
+static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+	struct ath10k_generic_iter *ar_iter = data;
+	struct ieee80211_conf *conf = &ar_iter->ar->hw->conf;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	enum wmi_sta_powersave_param param;
+	enum wmi_sta_ps_mode psmode;
+	int ret;
+
+	if (vif->type != NL80211_IFTYPE_STATION)
+		return;
+
+	if (conf->flags & IEEE80211_CONF_PS) {
+		psmode = WMI_STA_PS_MODE_ENABLED;
+		param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
+
+		ret = ath10k_wmi_set_sta_ps_param(ar_iter->ar,
+						  arvif->vdev_id,
+						  param,
+						  conf->dynamic_ps_timeout);
+		if (ret) {
+			ath10k_warn("Failed to set inactivity time for VDEV: %d\n",
+				    arvif->vdev_id);
+			return;
+		}
+
+		ar_iter->ret = ret;
+	} else {
+		psmode = WMI_STA_PS_MODE_DISABLED;
+	}
+
+	ar_iter->ret = ath10k_wmi_set_psmode(ar_iter->ar, arvif->vdev_id,
+					     psmode);
+	if (ar_iter->ret)
+		ath10k_warn("Failed to set PS Mode: %d for VDEV: %d\n",
+			    psmode, arvif->vdev_id);
+	else
+		ath10k_dbg(ATH10K_DBG_MAC, "Set PS Mode: %d for VDEV: %d\n",
+			   psmode, arvif->vdev_id);
+}
+
+/**********************/
+/* Station management */
+/**********************/
+
+static void ath10k_peer_assoc_h_basic(struct ath10k *ar,
+				      struct ath10k_vif *arvif,
+				      struct ieee80211_sta *sta,
+				      struct ieee80211_bss_conf *bss_conf,
+				      struct wmi_peer_assoc_complete_arg *arg)
+{
+	memcpy(arg->addr, sta->addr, ETH_ALEN);
+	arg->vdev_id = arvif->vdev_id;
+	arg->peer_aid = sta->aid;
+	arg->peer_flags |= WMI_PEER_AUTH;
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_STA)
+		/*
+		 * Seems FW have problems with Power Save in STA
+		 * mode when we setup this parameter to high (eg. 5).
+		 * Often we see that FW don't send NULL (with clean P flags)
+		 * frame even there is info about buffered frames in beacons.
+		 * Sometimes we have to wait more than 10 seconds before FW
+		 * will wakeup. Often sending one ping from AP to our device
+		 * just fail (more than 50%).
+		 *
+		 * Seems setting this FW parameter to 1 couse FW
+		 * will check every beacon and will wakup immediately
+		 * after detection buffered data.
+		 */
+		arg->peer_listen_intval = 1;
+	else
+		arg->peer_listen_intval = ar->hw->conf.listen_interval;
+
+	arg->peer_num_spatial_streams = 1;
+
+	/*
+	 * The assoc capabilities are available only in managed mode.
+	 */
+	if (arvif->vdev_type == WMI_VDEV_TYPE_STA && bss_conf)
+		arg->peer_caps = bss_conf->assoc_capability;
+}
+
+static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
+				       struct ath10k_vif *arvif,
+				       struct wmi_peer_assoc_complete_arg *arg)
+{
+	struct ieee80211_vif *vif = arvif->vif;
+	struct ieee80211_bss_conf *info = &vif->bss_conf;
+	struct cfg80211_bss *bss;
+	const u8 *rsnie = NULL;
+	const u8 *wpaie = NULL;
+
+	bss = cfg80211_get_bss(ar->hw->wiphy, ar->hw->conf.chandef.chan,
+			       info->bssid, NULL, 0, 0, 0);
+	if (bss) {
+		const struct cfg80211_bss_ies *ies;
+
+		rcu_read_lock();
+		rsnie = ieee80211_bss_get_ie(bss, WLAN_EID_RSN);
+
+		ies = rcu_dereference(bss->ies);
+
+		wpaie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
+				WLAN_OUI_TYPE_MICROSOFT_WPA,
+				ies->data,
+				ies->len);
+		rcu_read_unlock();
+		cfg80211_put_bss(ar->hw->wiphy, bss);
+	}
+
+	/* FIXME: base on RSN IE/WPA IE is a correct idea? */
+	if (rsnie || wpaie) {
+		ath10k_dbg(ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__);
+		arg->peer_flags |= WMI_PEER_NEED_PTK_4_WAY;
+	}
+
+	if (wpaie) {
+		ath10k_dbg(ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__);
+		arg->peer_flags |= WMI_PEER_NEED_GTK_2_WAY;
+	}
+}
+
+static void ath10k_peer_assoc_h_rates(struct ath10k *ar,
+				      struct ieee80211_sta *sta,
+				      struct wmi_peer_assoc_complete_arg *arg)
+{
+	struct wmi_rate_set_arg *rateset = &arg->peer_legacy_rates;
+	const struct ieee80211_supported_band *sband;
+	const struct ieee80211_rate *rates;
+	u32 ratemask;
+	int i;
+
+	sband = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band];
+	ratemask = sta->supp_rates[ar->hw->conf.chandef.chan->band];
+	rates = sband->bitrates;
+
+	rateset->num_rates = 0;
+
+	for (i = 0; i < 32; i++, ratemask >>= 1, rates++) {
+		if (!(ratemask & 1))
+			continue;
+
+		rateset->rates[rateset->num_rates] = rates->hw_value;
+		rateset->num_rates++;
+	}
+}
+
+static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
+				   struct ieee80211_sta *sta,
+				   struct wmi_peer_assoc_complete_arg *arg)
+{
+	const struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+	int smps;
+	int i, n;
+
+	if (!ht_cap->ht_supported)
+		return;
+
+	arg->peer_flags |= WMI_PEER_HT;
+	arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
+				    ht_cap->ampdu_factor)) - 1;
+
+	arg->peer_mpdu_density =
+		ath10k_parse_mpdudensity(ht_cap->ampdu_density);
+
+	arg->peer_ht_caps = ht_cap->cap;
+	arg->peer_rate_caps |= WMI_RC_HT_FLAG;
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING)
+		arg->peer_flags |= WMI_PEER_LDPC;
+
+	if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) {
+		arg->peer_flags |= WMI_PEER_40MHZ;
+		arg->peer_rate_caps |= WMI_RC_CW40_FLAG;
+	}
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20)
+		arg->peer_rate_caps |= WMI_RC_SGI_FLAG;
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_SGI_40)
+		arg->peer_rate_caps |= WMI_RC_SGI_FLAG;
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) {
+		arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG;
+		arg->peer_flags |= WMI_PEER_STBC;
+	}
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) {
+		u32 stbc;
+		stbc = ht_cap->cap & IEEE80211_HT_CAP_RX_STBC;
+		stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT;
+		stbc = stbc << WMI_RC_RX_STBC_FLAG_S;
+		arg->peer_rate_caps |= stbc;
+		arg->peer_flags |= WMI_PEER_STBC;
+	}
+
+	smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS;
+	smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+	if (smps == WLAN_HT_CAP_SM_PS_STATIC) {
+		arg->peer_flags |= WMI_PEER_SPATIAL_MUX;
+		arg->peer_flags |= WMI_PEER_STATIC_MIMOPS;
+	} else if (smps == WLAN_HT_CAP_SM_PS_DYNAMIC) {
+		arg->peer_flags |= WMI_PEER_SPATIAL_MUX;
+		arg->peer_flags |= WMI_PEER_DYN_MIMOPS;
+	}
+
+	if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2])
+		arg->peer_rate_caps |= WMI_RC_TS_FLAG;
+	else if (ht_cap->mcs.rx_mask[1])
+		arg->peer_rate_caps |= WMI_RC_DS_FLAG;
+
+	for (i = 0, n = 0; i < IEEE80211_HT_MCS_MASK_LEN*8; i++)
+		if (ht_cap->mcs.rx_mask[i/8] & (1 << i%8))
+			arg->peer_ht_rates.rates[n++] = i;
+
+	arg->peer_ht_rates.num_rates = n;
+	arg->peer_num_spatial_streams = max((n+7) / 8, 1);
+
+	ath10k_dbg(ATH10K_DBG_MAC, "mcs cnt %d nss %d\n",
+		   arg->peer_ht_rates.num_rates,
+		   arg->peer_num_spatial_streams);
+}
+
+static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar,
+				       struct ath10k_vif *arvif,
+				       struct ieee80211_sta *sta,
+				       struct ieee80211_bss_conf *bss_conf,
+				       struct wmi_peer_assoc_complete_arg *arg)
+{
+	u32 uapsd = 0;
+	u32 max_sp = 0;
+
+	if (sta->wme)
+		arg->peer_flags |= WMI_PEER_QOS;
+
+	if (sta->wme && sta->uapsd_queues) {
+		ath10k_dbg(ATH10K_DBG_MAC, "uapsd_queues: 0x%X, max_sp: %d\n",
+			   sta->uapsd_queues, sta->max_sp);
+
+		arg->peer_flags |= WMI_PEER_APSD;
+		arg->peer_flags |= WMI_RC_UAPSD_FLAG;
+
+		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
+			uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN |
+				 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN;
+		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
+			uapsd |= WMI_AP_PS_UAPSD_AC2_DELIVERY_EN |
+				 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN;
+		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
+			uapsd |= WMI_AP_PS_UAPSD_AC1_DELIVERY_EN |
+				 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN;
+		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
+			uapsd |= WMI_AP_PS_UAPSD_AC0_DELIVERY_EN |
+				 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN;
+
+
+		if (sta->max_sp < MAX_WMI_AP_PS_PEER_PARAM_MAX_SP)
+			max_sp = sta->max_sp;
+
+		ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+					   sta->addr,
+					   WMI_AP_PS_PEER_PARAM_UAPSD,
+					   uapsd);
+
+		ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+					   sta->addr,
+					   WMI_AP_PS_PEER_PARAM_MAX_SP,
+					   max_sp);
+
+		/* TODO setup this based on STA listen interval and
+		   beacon interval. Currently we don't know
+		   sta->listen_interval - mac80211 patch required.
+		   Currently use 10 seconds */
+		ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+					   sta->addr,
+					   WMI_AP_PS_PEER_PARAM_AGEOUT_TIME,
+					   10);
+	}
+}
+
+static void ath10k_peer_assoc_h_qos_sta(struct ath10k *ar,
+					struct ath10k_vif *arvif,
+					struct ieee80211_sta *sta,
+					struct ieee80211_bss_conf *bss_conf,
+					struct wmi_peer_assoc_complete_arg *arg)
+{
+	if (bss_conf->qos)
+		arg->peer_flags |= WMI_PEER_QOS;
+}
+
+static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
+				    struct ieee80211_sta *sta,
+				    struct wmi_peer_assoc_complete_arg *arg)
+{
+	const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
+
+	if (!vht_cap->vht_supported)
+		return;
+
+	arg->peer_flags |= WMI_PEER_VHT;
+
+	arg->peer_vht_caps = vht_cap->cap;
+
+	if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
+		arg->peer_flags |= WMI_PEER_80MHZ;
+
+	arg->peer_vht_rates.rx_max_rate =
+		__le16_to_cpu(vht_cap->vht_mcs.rx_highest);
+	arg->peer_vht_rates.rx_mcs_set =
+		__le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map);
+	arg->peer_vht_rates.tx_max_rate =
+		__le16_to_cpu(vht_cap->vht_mcs.tx_highest);
+	arg->peer_vht_rates.tx_mcs_set =
+		__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map);
+
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer\n");
+}
+
+static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
+				    struct ath10k_vif *arvif,
+				    struct ieee80211_sta *sta,
+				    struct ieee80211_bss_conf *bss_conf,
+				    struct wmi_peer_assoc_complete_arg *arg)
+{
+	switch (arvif->vdev_type) {
+	case WMI_VDEV_TYPE_AP:
+		ath10k_peer_assoc_h_qos_ap(ar, arvif, sta, bss_conf, arg);
+		break;
+	case WMI_VDEV_TYPE_STA:
+		ath10k_peer_assoc_h_qos_sta(ar, arvif, sta, bss_conf, arg);
+		break;
+	default:
+		break;
+	}
+}
+
+static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
+					struct ath10k_vif *arvif,
+					struct ieee80211_sta *sta,
+					struct wmi_peer_assoc_complete_arg *arg)
+{
+	enum wmi_phy_mode phymode = MODE_UNKNOWN;
+
+	/* FIXME: add VHT */
+
+	switch (ar->hw->conf.chandef.chan->band) {
+	case IEEE80211_BAND_2GHZ:
+		if (sta->ht_cap.ht_supported) {
+			if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+				phymode = MODE_11NG_HT40;
+			else
+				phymode = MODE_11NG_HT20;
+		} else {
+			phymode = MODE_11G;
+		}
+
+		break;
+	case IEEE80211_BAND_5GHZ:
+		if (sta->ht_cap.ht_supported) {
+			if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+				phymode = MODE_11NA_HT40;
+			else
+				phymode = MODE_11NA_HT20;
+		} else {
+			phymode = MODE_11A;
+		}
+
+		break;
+	default:
+		break;
+	}
+
+	arg->peer_phymode = phymode;
+	WARN_ON(phymode == MODE_UNKNOWN);
+}
+
+static int ath10k_peer_assoc(struct ath10k *ar,
+			     struct ath10k_vif *arvif,
+			     struct ieee80211_sta *sta,
+			     struct ieee80211_bss_conf *bss_conf)
+{
+	struct wmi_peer_assoc_complete_arg arg;
+
+	memset(&arg, 0, sizeof(struct wmi_peer_assoc_complete_arg));
+
+	ath10k_peer_assoc_h_basic(ar, arvif, sta, bss_conf, &arg);
+	ath10k_peer_assoc_h_crypto(ar, arvif, &arg);
+	ath10k_peer_assoc_h_rates(ar, sta, &arg);
+	ath10k_peer_assoc_h_ht(ar, sta, &arg);
+	ath10k_peer_assoc_h_vht(ar, sta, &arg);
+	ath10k_peer_assoc_h_qos(ar, arvif, sta, bss_conf, &arg);
+	ath10k_peer_assoc_h_phymode(ar, arvif, sta, &arg);
+
+	return ath10k_wmi_peer_assoc(ar, &arg);
+}
+
+/* can be called only in mac80211 callbacks due to `key_count` usage */
+static void ath10k_bss_assoc(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     struct ieee80211_bss_conf *bss_conf)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ieee80211_sta *ap_sta;
+	int ret;
+
+	rcu_read_lock();
+
+	ap_sta = ieee80211_find_sta(vif, bss_conf->bssid);
+	if (!ap_sta) {
+		ath10k_warn("Failed to find station entry for %pM\n",
+			    bss_conf->bssid);
+		rcu_read_unlock();
+		return;
+	}
+
+	ret = ath10k_peer_assoc(ar, arvif, ap_sta, bss_conf);
+	if (ret) {
+		ath10k_warn("Peer assoc failed for %pM\n", bss_conf->bssid);
+		rcu_read_unlock();
+		return;
+	}
+
+	rcu_read_unlock();
+
+	ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, bss_conf->aid,
+				 bss_conf->bssid);
+	if (ret)
+		ath10k_warn("VDEV: %d up failed: ret %d\n",
+			    arvif->vdev_id, ret);
+	else
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "VDEV: %d associated, BSSID: %pM, AID: %d\n",
+			   arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
+}
+
+/*
+ * FIXME: flush TIDs
+ */
+static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret;
+
+	/*
+	 * For some reason, calling VDEV-DOWN before VDEV-STOP
+	 * makes the FW to send frames via HTT after disassociation.
+	 * No idea why this happens, even though VDEV-DOWN is supposed
+	 * to be analogous to link down, so just stop the VDEV.
+	 */
+	ret = ath10k_vdev_stop(arvif);
+	if (!ret)
+		ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d stopped\n",
+			   arvif->vdev_id);
+
+	/*
+	 * If we don't call VDEV-DOWN after VDEV-STOP FW will remain active and
+	 * report beacons from previously associated network through HTT.
+	 * This in turn would spam mac80211 WARN_ON if we bring down all
+	 * interfaces as it expects there is no rx when no interface is
+	 * running.
+	 */
+	ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+	if (ret)
+		ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d ath10k_wmi_vdev_down failed (%d)\n",
+			   arvif->vdev_id, ret);
+
+	ath10k_wmi_flush_tx(ar);
+
+	arvif->def_wep_key_index = 0;
+}
+
+static int ath10k_station_assoc(struct ath10k *ar, struct ath10k_vif *arvif,
+				struct ieee80211_sta *sta)
+{
+	int ret = 0;
+
+	ret = ath10k_peer_assoc(ar, arvif, sta, NULL);
+	if (ret) {
+		ath10k_warn("WMI peer assoc failed for %pM\n", sta->addr);
+		return ret;
+	}
+
+	ret = ath10k_install_peer_wep_keys(arvif, sta->addr);
+	if (ret) {
+		ath10k_warn("could not install peer wep keys (%d)\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int ath10k_station_disassoc(struct ath10k *ar, struct ath10k_vif *arvif,
+				   struct ieee80211_sta *sta)
+{
+	int ret = 0;
+
+	ret = ath10k_clear_peer_keys(arvif, sta->addr);
+	if (ret) {
+		ath10k_warn("could not clear all peer wep keys (%d)\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+/**************/
+/* Regulatory */
+/**************/
+
+static int ath10k_update_channel_list(struct ath10k *ar)
+{
+	struct ieee80211_hw *hw = ar->hw;
+	struct ieee80211_supported_band **bands;
+	enum ieee80211_band band;
+	struct ieee80211_channel *channel;
+	struct wmi_scan_chan_list_arg arg = {0};
+	struct wmi_channel_arg *ch;
+	bool passive;
+	int len;
+	int ret;
+	int i;
+
+	bands = hw->wiphy->bands;
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		if (!bands[band])
+			continue;
+
+		for (i = 0; i < bands[band]->n_channels; i++) {
+			if (bands[band]->channels[i].flags &
+			    IEEE80211_CHAN_DISABLED)
+				continue;
+
+			arg.n_channels++;
+		}
+	}
+
+	len = sizeof(struct wmi_channel_arg) * arg.n_channels;
+	arg.channels = kzalloc(len, GFP_KERNEL);
+	if (!arg.channels)
+		return -ENOMEM;
+
+	ch = arg.channels;
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		if (!bands[band])
+			continue;
+
+		for (i = 0; i < bands[band]->n_channels; i++) {
+			channel = &bands[band]->channels[i];
+
+			if (channel->flags & IEEE80211_CHAN_DISABLED)
+				continue;
+
+			ch->allow_ht   = true;
+
+			/* FIXME: when should we really allow VHT? */
+			ch->allow_vht = true;
+
+			ch->allow_ibss =
+				!(channel->flags & IEEE80211_CHAN_NO_IBSS);
+
+			ch->ht40plus =
+				!(channel->flags & IEEE80211_CHAN_NO_HT40PLUS);
+
+			passive = channel->flags & IEEE80211_CHAN_PASSIVE_SCAN;
+			ch->passive = passive;
+
+			ch->freq = channel->center_freq;
+			ch->min_power = channel->max_power * 3;
+			ch->max_power = channel->max_power * 4;
+			ch->max_reg_power = channel->max_reg_power * 4;
+			ch->max_antenna_gain = channel->max_antenna_gain;
+			ch->reg_class_id = 0; /* FIXME */
+
+			/* FIXME: why use only legacy modes, why not any
+			 * HT/VHT modes? Would that even make any
+			 * difference? */
+			if (channel->band == IEEE80211_BAND_2GHZ)
+				ch->mode = MODE_11G;
+			else
+				ch->mode = MODE_11A;
+
+			if (WARN_ON_ONCE(ch->mode == MODE_UNKNOWN))
+				continue;
+
+			ath10k_dbg(ATH10K_DBG_WMI,
+				   "%s: [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
+				   __func__, ch - arg.channels, arg.n_channels,
+				   ch->freq, ch->max_power, ch->max_reg_power,
+				   ch->max_antenna_gain, ch->mode);
+
+			ch++;
+		}
+	}
+
+	ret = ath10k_wmi_scan_chan_list(ar, &arg);
+	kfree(arg.channels);
+
+	return ret;
+}
+
+static void ath10k_reg_notifier(struct wiphy *wiphy,
+				struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct reg_dmn_pair_mapping *regpair;
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory);
+
+	ret = ath10k_update_channel_list(ar);
+	if (ret)
+		ath10k_warn("could not update channel list (%d)\n", ret);
+
+	regpair = ar->ath_common.regulatory.regpair;
+	/* Target allows setting up per-band regdomain but ath_common provides
+	 * a combined one only */
+	ret = ath10k_wmi_pdev_set_regdomain(ar,
+					    regpair->regDmnEnum,
+					    regpair->regDmnEnum, /* 2ghz */
+					    regpair->regDmnEnum, /* 5ghz */
+					    regpair->reg_2ghz_ctl,
+					    regpair->reg_5ghz_ctl);
+	if (ret)
+		ath10k_warn("could not set pdev regdomain (%d)\n", ret);
+}
+
+/***************/
+/* TX handlers */
+/***************/
+
+/*
+ * Frames sent to the FW have to be in "Native Wifi" format.
+ * Strip the QoS field from the 802.11 header.
+ */
+static void ath10k_tx_h_qos_workaround(struct ieee80211_hw *hw,
+				       struct ieee80211_tx_control *control,
+				       struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (void *)skb->data;
+	u8 *qos_ctl;
+
+	if (!ieee80211_is_data_qos(hdr->frame_control))
+		return;
+
+	qos_ctl = ieee80211_get_qos_ctl(hdr);
+	memmove(qos_ctl, qos_ctl + IEEE80211_QOS_CTL_LEN,
+		skb->len - ieee80211_hdrlen(hdr->frame_control));
+	skb_trim(skb, skb->len - IEEE80211_QOS_CTL_LEN);
+}
+
+static void ath10k_tx_h_update_wep_key(struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_vif *vif = info->control.vif;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ath10k *ar = arvif->ar;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_key_conf *key = info->control.hw_key;
+	int ret;
+
+	/* TODO AP mode should be implemented */
+	if (vif->type != NL80211_IFTYPE_STATION)
+		return;
+
+	if (!ieee80211_has_protected(hdr->frame_control))
+		return;
+
+	if (!key)
+		return;
+
+	if (key->cipher != WLAN_CIPHER_SUITE_WEP40 &&
+	    key->cipher != WLAN_CIPHER_SUITE_WEP104)
+		return;
+
+	if (key->keyidx == arvif->def_wep_key_index)
+		return;
+
+	ath10k_dbg(ATH10K_DBG_MAC, "new wep keyidx will be %d\n", key->keyidx);
+
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+					WMI_VDEV_PARAM_DEF_KEYID,
+					key->keyidx);
+	if (ret) {
+		ath10k_warn("could not update wep keyidx (%d)\n", ret);
+		return;
+	}
+
+	arvif->def_wep_key_index = key->keyidx;
+}
+
+static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_vif *vif = info->control.vif;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+	/* This is case only for P2P_GO */
+	if (arvif->vdev_type != WMI_VDEV_TYPE_AP ||
+	    arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+		return;
+
+	if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) {
+		spin_lock_bh(&ar->data_lock);
+		if (arvif->u.ap.noa_data)
+			if (!pskb_expand_head(skb, 0, arvif->u.ap.noa_len,
+					      GFP_ATOMIC))
+				memcpy(skb_put(skb, arvif->u.ap.noa_len),
+				       arvif->u.ap.noa_data,
+				       arvif->u.ap.noa_len);
+		spin_unlock_bh(&ar->data_lock);
+	}
+}
+
+static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	int ret;
+
+	if (ieee80211_is_mgmt(hdr->frame_control))
+		ret = ath10k_htt_mgmt_tx(ar->htt, skb);
+	else if (ieee80211_is_nullfunc(hdr->frame_control))
+		/* FW does not report tx status properly for NullFunc frames
+		 * unless they are sent through mgmt tx path. mac80211 sends
+		 * those frames when it detects link/beacon loss and depends on
+		 * the tx status to be correct. */
+		ret = ath10k_htt_mgmt_tx(ar->htt, skb);
+	else
+		ret = ath10k_htt_tx(ar->htt, skb);
+
+	if (ret) {
+		ath10k_warn("tx failed (%d). dropping packet.\n", ret);
+		ieee80211_free_txskb(ar->hw, skb);
+	}
+}
+
+void ath10k_offchan_tx_purge(struct ath10k *ar)
+{
+	struct sk_buff *skb;
+
+	for (;;) {
+		skb = skb_dequeue(&ar->offchan_tx_queue);
+		if (!skb)
+			break;
+
+		ieee80211_free_txskb(ar->hw, skb);
+	}
+}
+
+void ath10k_offchan_tx_work(struct work_struct *work)
+{
+	struct ath10k *ar = container_of(work, struct ath10k, offchan_tx_work);
+	struct ath10k_peer *peer;
+	struct ieee80211_hdr *hdr;
+	struct sk_buff *skb;
+	const u8 *peer_addr;
+	int vdev_id;
+	int ret;
+
+	/* FW requirement: We must create a peer before FW will send out
+	 * an offchannel frame. Otherwise the frame will be stuck and
+	 * never transmitted. We delete the peer upon tx completion.
+	 * It is unlikely that a peer for offchannel tx will already be
+	 * present. However it may be in some rare cases so account for that.
+	 * Otherwise we might remove a legitimate peer and break stuff. */
+
+	for (;;) {
+		skb = skb_dequeue(&ar->offchan_tx_queue);
+		if (!skb)
+			break;
+
+		mutex_lock(&ar->conf_mutex);
+
+		ath10k_dbg(ATH10K_DBG_MAC, "processing offchannel skb %p\n",
+			   skb);
+
+		hdr = (struct ieee80211_hdr *)skb->data;
+		peer_addr = ieee80211_get_DA(hdr);
+		vdev_id = ATH10K_SKB_CB(skb)->htt.vdev_id;
+
+		spin_lock_bh(&ar->data_lock);
+		peer = ath10k_peer_find(ar, vdev_id, peer_addr);
+		spin_unlock_bh(&ar->data_lock);
+
+		if (peer)
+			ath10k_dbg(ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n",
+				   peer_addr, vdev_id);
+
+		if (!peer) {
+			ret = ath10k_peer_create(ar, vdev_id, peer_addr);
+			if (ret)
+				ath10k_warn("peer %pM on vdev %d not created (%d)\n",
+					    peer_addr, vdev_id, ret);
+		}
+
+		spin_lock_bh(&ar->data_lock);
+		INIT_COMPLETION(ar->offchan_tx_completed);
+		ar->offchan_tx_skb = skb;
+		spin_unlock_bh(&ar->data_lock);
+
+		ath10k_tx_htt(ar, skb);
+
+		ret = wait_for_completion_timeout(&ar->offchan_tx_completed,
+						  3 * HZ);
+		if (ret <= 0)
+			ath10k_warn("timed out waiting for offchannel skb %p\n",
+				    skb);
+
+		if (!peer) {
+			ret = ath10k_peer_delete(ar, vdev_id, peer_addr);
+			if (ret)
+				ath10k_warn("peer %pM on vdev %d not deleted (%d)\n",
+					    peer_addr, vdev_id, ret);
+		}
+
+		mutex_unlock(&ar->conf_mutex);
+	}
+}
+
+/************/
+/* Scanning */
+/************/
+
+/*
+ * This gets called if we dont get a heart-beat during scan.
+ * This may indicate the FW has hung and we need to abort the
+ * scan manually to prevent cancel_hw_scan() from deadlocking
+ */
+void ath10k_reset_scan(unsigned long ptr)
+{
+	struct ath10k *ar = (struct ath10k *)ptr;
+
+	spin_lock_bh(&ar->data_lock);
+	if (!ar->scan.in_progress) {
+		spin_unlock_bh(&ar->data_lock);
+		return;
+	}
+
+	ath10k_warn("scan timeout. resetting. fw issue?\n");
+
+	if (ar->scan.is_roc)
+		ieee80211_remain_on_channel_expired(ar->hw);
+	else
+		ieee80211_scan_completed(ar->hw, 1 /* aborted */);
+
+	ar->scan.in_progress = false;
+	complete_all(&ar->scan.completed);
+	spin_unlock_bh(&ar->data_lock);
+}
+
+static int ath10k_abort_scan(struct ath10k *ar)
+{
+	struct wmi_stop_scan_arg arg = {
+		.req_id = 1, /* FIXME */
+		.req_type = WMI_SCAN_STOP_ONE,
+		.u.scan_id = ATH10K_SCAN_ID,
+	};
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	del_timer_sync(&ar->scan.timeout);
+
+	spin_lock_bh(&ar->data_lock);
+	if (!ar->scan.in_progress) {
+		spin_unlock_bh(&ar->data_lock);
+		return 0;
+	}
+
+	ar->scan.aborting = true;
+	spin_unlock_bh(&ar->data_lock);
+
+	ret = ath10k_wmi_stop_scan(ar, &arg);
+	if (ret) {
+		ath10k_warn("could not submit wmi stop scan (%d)\n", ret);
+		return -EIO;
+	}
+
+	ath10k_wmi_flush_tx(ar);
+
+	ret = wait_for_completion_timeout(&ar->scan.completed, 3*HZ);
+	if (ret == 0)
+		ath10k_warn("timed out while waiting for scan to stop\n");
+
+	/* scan completion may be done right after we timeout here, so let's
+	 * check the in_progress and tell mac80211 scan is completed. if we
+	 * don't do that and FW fails to send us scan completion indication
+	 * then userspace won't be able to scan anymore */
+	ret = 0;
+
+	spin_lock_bh(&ar->data_lock);
+	if (ar->scan.in_progress) {
+		ath10k_warn("could not stop scan. its still in progress\n");
+		ar->scan.in_progress = false;
+		ath10k_offchan_tx_purge(ar);
+		ret = -ETIMEDOUT;
+	}
+	spin_unlock_bh(&ar->data_lock);
+
+	return ret;
+}
+
+static int ath10k_start_scan(struct ath10k *ar,
+			     const struct wmi_start_scan_arg *arg)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_wmi_start_scan(ar, arg);
+	if (ret)
+		return ret;
+
+	/* make sure we submit the command so the completion
+	* timeout makes sense */
+	ath10k_wmi_flush_tx(ar);
+
+	ret = wait_for_completion_timeout(&ar->scan.started, 1*HZ);
+	if (ret == 0) {
+		ath10k_abort_scan(ar);
+		return ret;
+	}
+
+	/* the scan can complete earlier, before we even
+	 * start the timer. in that case the timer handler
+	 * checks ar->scan.in_progress and bails out if its
+	 * false. Add a 200ms margin to account event/command
+	 * processing. */
+	mod_timer(&ar->scan.timeout, jiffies +
+		  msecs_to_jiffies(arg->max_scan_time+200));
+	return 0;
+}
+
+/**********************/
+/* mac80211 callbacks */
+/**********************/
+
+static void ath10k_tx(struct ieee80211_hw *hw,
+		      struct ieee80211_tx_control *control,
+		      struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = NULL;
+	u32 vdev_id = 0;
+	u8 tid;
+
+	if (info->control.vif) {
+		arvif = ath10k_vif_to_arvif(info->control.vif);
+		vdev_id = arvif->vdev_id;
+	} else if (ar->monitor_enabled) {
+		vdev_id = ar->monitor_vdev_id;
+	}
+
+	/* We should disable CCK RATE due to P2P */
+	if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
+		ath10k_dbg(ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n");
+
+	/* we must calculate tid before we apply qos workaround
+	 * as we'd lose the qos control field */
+	tid = HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
+	if (ieee80211_is_data_qos(hdr->frame_control) &&
+	    is_unicast_ether_addr(ieee80211_get_DA(hdr))) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+	}
+
+	ath10k_tx_h_qos_workaround(hw, control, skb);
+	ath10k_tx_h_update_wep_key(skb);
+	ath10k_tx_h_add_p2p_noa_ie(ar, skb);
+	ath10k_tx_h_seq_no(skb);
+
+	memset(ATH10K_SKB_CB(skb), 0, sizeof(*ATH10K_SKB_CB(skb)));
+	ATH10K_SKB_CB(skb)->htt.vdev_id = vdev_id;
+	ATH10K_SKB_CB(skb)->htt.tid = tid;
+
+	if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
+		spin_lock_bh(&ar->data_lock);
+		ATH10K_SKB_CB(skb)->htt.is_offchan = true;
+		ATH10K_SKB_CB(skb)->htt.vdev_id = ar->scan.vdev_id;
+		spin_unlock_bh(&ar->data_lock);
+
+		ath10k_dbg(ATH10K_DBG_MAC, "queued offchannel skb %p\n", skb);
+
+		skb_queue_tail(&ar->offchan_tx_queue, skb);
+		ieee80211_queue_work(hw, &ar->offchan_tx_work);
+		return;
+	}
+
+	ath10k_tx_htt(ar, skb);
+}
+
+/*
+ * Initialize various parameters with default vaules.
+ */
+static int ath10k_start(struct ieee80211_hw *hw)
+{
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_PMF_QOS, 1);
+	if (ret)
+		ath10k_warn("could not enable WMI_PDEV_PARAM_PMF_QOS (%d)\n",
+			    ret);
+
+	ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_DYNAMIC_BW, 0);
+	if (ret)
+		ath10k_warn("could not init WMI_PDEV_PARAM_DYNAMIC_BW (%d)\n",
+			    ret);
+
+	return 0;
+}
+
+static void ath10k_stop(struct ieee80211_hw *hw)
+{
+	struct ath10k *ar = hw->priv;
+
+	/* avoid leaks in case FW never confirms scan for offchannel */
+	cancel_work_sync(&ar->offchan_tx_work);
+	ath10k_offchan_tx_purge(ar);
+}
+
+static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct ath10k_generic_iter ar_iter;
+	struct ath10k *ar = hw->priv;
+	struct ieee80211_conf *conf = &hw->conf;
+	int ret = 0;
+	u32 flags;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		ath10k_dbg(ATH10K_DBG_MAC, "Config channel %d mhz\n",
+			   conf->chandef.chan->center_freq);
+		spin_lock_bh(&ar->data_lock);
+		ar->rx_channel = conf->chandef.chan;
+		spin_unlock_bh(&ar->data_lock);
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_PS) {
+		memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
+		ar_iter.ar = ar;
+		flags = IEEE80211_IFACE_ITER_RESUME_ALL;
+
+		ieee80211_iterate_active_interfaces_atomic(hw,
+							   flags,
+							   ath10k_ps_iter,
+							   &ar_iter);
+
+		ret = ar_iter.ret;
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
+		if (conf->flags & IEEE80211_CONF_MONITOR)
+			ret = ath10k_monitor_create(ar);
+		else
+			ret = ath10k_monitor_destroy(ar);
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+/*
+ * TODO:
+ * Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE,
+ * because we will send mgmt frames without CCK. This requirement
+ * for P2P_FIND/GO_NEG should be handled by checking CCK flag
+ * in the TX packet.
+ */
+static int ath10k_add_interface(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	enum wmi_sta_powersave_param param;
+	int ret = 0;
+	u32 value;
+	int bit;
+
+	mutex_lock(&ar->conf_mutex);
+
+	arvif->ar = ar;
+	arvif->vif = vif;
+
+	if ((vif->type == NL80211_IFTYPE_MONITOR) && ar->monitor_present) {
+		ath10k_warn("Only one monitor interface allowed\n");
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	bit = ffs(ar->free_vdev_map);
+	if (bit == 0) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	arvif->vdev_id = bit - 1;
+	arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE;
+	ar->free_vdev_map &= ~(1 << arvif->vdev_id);
+
+	if (ar->p2p)
+		arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case NL80211_IFTYPE_STATION:
+		arvif->vdev_type = WMI_VDEV_TYPE_STA;
+		if (vif->p2p)
+			arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_CLIENT;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		arvif->vdev_type = WMI_VDEV_TYPE_IBSS;
+		break;
+	case NL80211_IFTYPE_AP:
+		arvif->vdev_type = WMI_VDEV_TYPE_AP;
+
+		if (vif->p2p)
+			arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_GO;
+		break;
+	case NL80211_IFTYPE_MONITOR:
+		arvif->vdev_type = WMI_VDEV_TYPE_MONITOR;
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	ath10k_dbg(ATH10K_DBG_MAC, "Add interface: id %d type %d subtype %d\n",
+		   arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype);
+
+	ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type,
+				     arvif->vdev_subtype, vif->addr);
+	if (ret) {
+		ath10k_warn("WMI vdev create failed: ret %d\n", ret);
+		goto exit;
+	}
+
+	ret = ath10k_wmi_vdev_set_param(ar, 0, WMI_VDEV_PARAM_DEF_KEYID,
+					arvif->def_wep_key_index);
+	if (ret)
+		ath10k_warn("Failed to set default keyid: %d\n", ret);
+
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+					WMI_VDEV_PARAM_TX_ENCAP_TYPE,
+					ATH10K_HW_TXRX_NATIVE_WIFI);
+	if (ret)
+		ath10k_warn("Failed to set TX encap: %d\n", ret);
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+		ret = ath10k_peer_create(ar, arvif->vdev_id, vif->addr);
+		if (ret) {
+			ath10k_warn("Failed to create peer for AP: %d\n", ret);
+			goto exit;
+		}
+	}
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_STA) {
+		param = WMI_STA_PS_PARAM_RX_WAKE_POLICY;
+		value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
+		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+						  param, value);
+		if (ret)
+			ath10k_warn("Failed to set RX wake policy: %d\n", ret);
+
+		param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
+		value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
+		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+						  param, value);
+		if (ret)
+			ath10k_warn("Failed to set TX wake thresh: %d\n", ret);
+
+		param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
+		value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX;
+		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+						  param, value);
+		if (ret)
+			ath10k_warn("Failed to set PSPOLL count: %d\n", ret);
+	}
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
+		ar->monitor_present = true;
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static void ath10k_remove_interface(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ath10k_dbg(ATH10K_DBG_MAC, "Remove interface: id %d\n", arvif->vdev_id);
+
+	ar->free_vdev_map |= 1 << (arvif->vdev_id);
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+		ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, vif->addr);
+		if (ret)
+			ath10k_warn("Failed to remove peer for AP: %d\n", ret);
+
+		kfree(arvif->u.ap.noa_data);
+	}
+
+	ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
+	if (ret)
+		ath10k_warn("WMI vdev delete failed: %d\n", ret);
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
+		ar->monitor_present = false;
+
+	ath10k_peer_cleanup(ar, arvif->vdev_id);
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+/*
+ * FIXME: Has to be verified.
+ */
+#define SUPPORTED_FILTERS			\
+	(FIF_PROMISC_IN_BSS |			\
+	FIF_ALLMULTI |				\
+	FIF_CONTROL |				\
+	FIF_PSPOLL |				\
+	FIF_OTHER_BSS |				\
+	FIF_BCN_PRBRESP_PROMISC |		\
+	FIF_PROBE_REQ |				\
+	FIF_FCSFAIL)
+
+static void ath10k_configure_filter(struct ieee80211_hw *hw,
+				    unsigned int changed_flags,
+				    unsigned int *total_flags,
+				    u64 multicast)
+{
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	changed_flags &= SUPPORTED_FILTERS;
+	*total_flags &= SUPPORTED_FILTERS;
+	ar->filter_flags = *total_flags;
+
+	if ((ar->filter_flags & FIF_PROMISC_IN_BSS) &&
+	    !ar->monitor_enabled) {
+		ret = ath10k_monitor_start(ar, ar->monitor_vdev_id);
+		if (ret)
+			ath10k_warn("Unable to start monitor mode\n");
+		else
+			ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode started\n");
+	} else if (!(ar->filter_flags & FIF_PROMISC_IN_BSS) &&
+		   ar->monitor_enabled) {
+		ret = ath10k_monitor_stop(ar);
+		if (ret)
+			ath10k_warn("Unable to stop monitor mode\n");
+		else
+			ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode stopped\n");
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif,
+				    struct ieee80211_bss_conf *info,
+				    u32 changed)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret = 0;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (changed & BSS_CHANGED_IBSS)
+		ath10k_control_ibss(arvif, info, vif->addr);
+
+	if (changed & BSS_CHANGED_BEACON_INT) {
+		arvif->beacon_interval = info->beacon_int;
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+						WMI_VDEV_PARAM_BEACON_INTERVAL,
+						arvif->beacon_interval);
+		if (ret)
+			ath10k_warn("Failed to set beacon interval for VDEV: %d\n",
+				    arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Beacon interval: %d set for VDEV: %d\n",
+				   arvif->beacon_interval, arvif->vdev_id);
+	}
+
+	if (changed & BSS_CHANGED_BEACON) {
+		ret = ath10k_wmi_pdev_set_param(ar,
+						WMI_PDEV_PARAM_BEACON_TX_MODE,
+						WMI_BEACON_STAGGERED_MODE);
+		if (ret)
+			ath10k_warn("Failed to set beacon mode for VDEV: %d\n",
+				    arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Set staggered beacon mode for VDEV: %d\n",
+				   arvif->vdev_id);
+	}
+
+	if (changed & BSS_CHANGED_DTIM_PERIOD) {
+		arvif->dtim_period = info->dtim_period;
+
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+						WMI_VDEV_PARAM_DTIM_PERIOD,
+						arvif->dtim_period);
+		if (ret)
+			ath10k_warn("Failed to set dtim period for VDEV: %d\n",
+				    arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Set dtim period: %d for VDEV: %d\n",
+				   arvif->dtim_period, arvif->vdev_id);
+	}
+
+	if (changed & BSS_CHANGED_SSID &&
+	    vif->type == NL80211_IFTYPE_AP) {
+		arvif->u.ap.ssid_len = info->ssid_len;
+		if (info->ssid_len)
+			memcpy(arvif->u.ap.ssid, info->ssid, info->ssid_len);
+		arvif->u.ap.hidden_ssid = info->hidden_ssid;
+	}
+
+	if (changed & BSS_CHANGED_BSSID) {
+		if (!is_zero_ether_addr(info->bssid)) {
+			ret = ath10k_peer_create(ar, arvif->vdev_id,
+						 info->bssid);
+			if (ret)
+				ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
+					    info->bssid, arvif->vdev_id);
+			else
+				ath10k_dbg(ATH10K_DBG_MAC,
+					   "Added peer: %pM for VDEV: %d\n",
+					   info->bssid, arvif->vdev_id);
+
+
+			if (vif->type == NL80211_IFTYPE_STATION) {
+				/*
+				 * this is never erased as we it for crypto key
+				 * clearing; this is FW requirement
+				 */
+				memcpy(arvif->u.sta.bssid, info->bssid,
+				       ETH_ALEN);
+
+				ret = ath10k_vdev_start(arvif);
+				if (!ret)
+					ath10k_dbg(ATH10K_DBG_MAC,
+						   "VDEV: %d started with BSSID: %pM\n",
+						   arvif->vdev_id, info->bssid);
+			}
+
+			/*
+			 * Mac80211 does not keep IBSS bssid when leaving IBSS,
+			 * so driver need to store it. It is needed when leaving
+			 * IBSS in order to remove BSSID peer.
+			 */
+			if (vif->type == NL80211_IFTYPE_ADHOC)
+				memcpy(arvif->u.ibss.bssid, info->bssid,
+				       ETH_ALEN);
+		}
+	}
+
+	if (changed & BSS_CHANGED_BEACON_ENABLED)
+		ath10k_control_beaconing(arvif, info);
+
+	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+		u32 cts_prot;
+		if (info->use_cts_prot)
+			cts_prot = 1;
+		else
+			cts_prot = 0;
+
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+						WMI_VDEV_PARAM_ENABLE_RTSCTS,
+						cts_prot);
+		if (ret)
+			ath10k_warn("Failed to set CTS prot for VDEV: %d\n",
+				    arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Set CTS prot: %d for VDEV: %d\n",
+				   cts_prot, arvif->vdev_id);
+	}
+
+	if (changed & BSS_CHANGED_ERP_SLOT) {
+		u32 slottime;
+		if (info->use_short_slot)
+			slottime = WMI_VDEV_SLOT_TIME_SHORT; /* 9us */
+
+		else
+			slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */
+
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+						WMI_VDEV_PARAM_SLOT_TIME,
+						slottime);
+		if (ret)
+			ath10k_warn("Failed to set erp slot for VDEV: %d\n",
+				    arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Set slottime: %d for VDEV: %d\n",
+				   slottime, arvif->vdev_id);
+	}
+
+	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+		u32 preamble;
+		if (info->use_short_preamble)
+			preamble = WMI_VDEV_PREAMBLE_SHORT;
+		else
+			preamble = WMI_VDEV_PREAMBLE_LONG;
+
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+						WMI_VDEV_PARAM_PREAMBLE,
+						preamble);
+		if (ret)
+			ath10k_warn("Failed to set preamble for VDEV: %d\n",
+				    arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Set preamble: %d for VDEV: %d\n",
+				   preamble, arvif->vdev_id);
+	}
+
+	if (changed & BSS_CHANGED_ASSOC) {
+		if (info->assoc)
+			ath10k_bss_assoc(hw, vif, info);
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_hw_scan(struct ieee80211_hw *hw,
+			  struct ieee80211_vif *vif,
+			  struct cfg80211_scan_request *req)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct wmi_start_scan_arg arg;
+	int ret = 0;
+	int i;
+
+	mutex_lock(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	if (ar->scan.in_progress) {
+		spin_unlock_bh(&ar->data_lock);
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	INIT_COMPLETION(ar->scan.started);
+	INIT_COMPLETION(ar->scan.completed);
+	ar->scan.in_progress = true;
+	ar->scan.aborting = false;
+	ar->scan.is_roc = false;
+	ar->scan.vdev_id = arvif->vdev_id;
+	spin_unlock_bh(&ar->data_lock);
+
+	memset(&arg, 0, sizeof(arg));
+	ath10k_wmi_start_scan_init(ar, &arg);
+	arg.vdev_id = arvif->vdev_id;
+	arg.scan_id = ATH10K_SCAN_ID;
+
+	if (!req->no_cck)
+		arg.scan_ctrl_flags |= WMI_SCAN_ADD_CCK_RATES;
+
+	if (req->ie_len) {
+		arg.ie_len = req->ie_len;
+		memcpy(arg.ie, req->ie, arg.ie_len);
+	}
+
+	if (req->n_ssids) {
+		arg.n_ssids = req->n_ssids;
+		for (i = 0; i < arg.n_ssids; i++) {
+			arg.ssids[i].len  = req->ssids[i].ssid_len;
+			arg.ssids[i].ssid = req->ssids[i].ssid;
+		}
+	}
+
+	if (req->n_channels) {
+		arg.n_channels = req->n_channels;
+		for (i = 0; i < arg.n_channels; i++)
+			arg.channels[i] = req->channels[i]->center_freq;
+	}
+
+	ret = ath10k_start_scan(ar, &arg);
+	if (ret) {
+		ath10k_warn("could not start hw scan (%d)\n", ret);
+		spin_lock_bh(&ar->data_lock);
+		ar->scan.in_progress = false;
+		spin_unlock_bh(&ar->data_lock);
+	}
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static void ath10k_cancel_hw_scan(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif)
+{
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+	ret = ath10k_abort_scan(ar);
+	if (ret) {
+		ath10k_warn("couldn't abort scan (%d). forcefully sending scan completion to mac80211\n",
+			    ret);
+		ieee80211_scan_completed(hw, 1 /* aborted */);
+	}
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+			  struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+			  struct ieee80211_key_conf *key)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ath10k_peer *peer;
+	const u8 *peer_addr;
+	bool is_wep = key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+		      key->cipher == WLAN_CIPHER_SUITE_WEP104;
+	int ret = 0;
+
+	if (key->keyidx > WMI_MAX_KEY_INDEX)
+		return -ENOSPC;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (sta)
+		peer_addr = sta->addr;
+	else if (arvif->vdev_type == WMI_VDEV_TYPE_STA)
+		peer_addr = vif->bss_conf.bssid;
+	else
+		peer_addr = vif->addr;
+
+	key->hw_key_idx = key->keyidx;
+
+	/* the peer should not disappear in mid-way (unless FW goes awry) since
+	 * we already hold conf_mutex. we just make sure its there now. */
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
+	spin_unlock_bh(&ar->data_lock);
+
+	if (!peer) {
+		if (cmd == SET_KEY) {
+			ath10k_warn("cannot install key for non-existent peer %pM\n",
+				    peer_addr);
+			ret = -EOPNOTSUPP;
+			goto exit;
+		} else {
+			/* if the peer doesn't exist there is no key to disable
+			 * anymore */
+			goto exit;
+		}
+	}
+
+	if (is_wep) {
+		if (cmd == SET_KEY)
+			arvif->wep_keys[key->keyidx] = key;
+		else
+			arvif->wep_keys[key->keyidx] = NULL;
+
+		if (cmd == DISABLE_KEY)
+			ath10k_clear_vdev_key(arvif, key);
+	}
+
+	ret = ath10k_install_key(arvif, key, cmd, peer_addr);
+	if (ret) {
+		ath10k_warn("ath10k_install_key failed (%d)\n", ret);
+		goto exit;
+	}
+
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
+	if (peer && cmd == SET_KEY)
+		peer->keys[key->keyidx] = key;
+	else if (peer && cmd == DISABLE_KEY)
+		peer->keys[key->keyidx] = NULL;
+	else if (peer == NULL)
+		/* impossible unless FW goes crazy */
+		ath10k_warn("peer %pM disappeared!\n", peer_addr);
+	spin_unlock_bh(&ar->data_lock);
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static int ath10k_sta_state(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
+			    struct ieee80211_sta *sta,
+			    enum ieee80211_sta_state old_state,
+			    enum ieee80211_sta_state new_state)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret = 0;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (old_state == IEEE80211_STA_NOTEXIST &&
+	    new_state == IEEE80211_STA_NONE &&
+	    vif->type != NL80211_IFTYPE_STATION) {
+		/*
+		 * New station addition.
+		 */
+		ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
+		if (ret)
+			ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
+				    sta->addr, arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Added peer: %pM for VDEV: %d\n",
+				   sta->addr, arvif->vdev_id);
+	} else if ((old_state == IEEE80211_STA_NONE &&
+		    new_state == IEEE80211_STA_NOTEXIST)) {
+		/*
+		 * Existing station deletion.
+		 */
+		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
+		if (ret)
+			ath10k_warn("Failed to delete peer: %pM for VDEV: %d\n",
+				    sta->addr, arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Removed peer: %pM for VDEV: %d\n",
+				   sta->addr, arvif->vdev_id);
+
+		if (vif->type == NL80211_IFTYPE_STATION)
+			ath10k_bss_disassoc(hw, vif);
+	} else if (old_state == IEEE80211_STA_AUTH &&
+		   new_state == IEEE80211_STA_ASSOC &&
+		   (vif->type == NL80211_IFTYPE_AP ||
+		    vif->type == NL80211_IFTYPE_ADHOC)) {
+		/*
+		 * New association.
+		 */
+		ret = ath10k_station_assoc(ar, arvif, sta);
+		if (ret)
+			ath10k_warn("Failed to associate station: %pM\n",
+				    sta->addr);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Station %pM moved to assoc state\n",
+				   sta->addr);
+	} else if (old_state == IEEE80211_STA_ASSOC &&
+		   new_state == IEEE80211_STA_AUTH &&
+		   (vif->type == NL80211_IFTYPE_AP ||
+		    vif->type == NL80211_IFTYPE_ADHOC)) {
+		/*
+		 * Disassociation.
+		 */
+		ret = ath10k_station_disassoc(ar, arvif, sta);
+		if (ret)
+			ath10k_warn("Failed to disassociate station: %pM\n",
+				    sta->addr);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Station %pM moved to disassociated state\n",
+				   sta->addr);
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif,
+				 u16 ac, bool enable)
+{
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	u32 value = 0;
+	int ret = 0;
+
+	if (arvif->vdev_type != WMI_VDEV_TYPE_STA)
+		return 0;
+
+	switch (ac) {
+	case IEEE80211_AC_VO:
+		value = WMI_STA_PS_UAPSD_AC3_DELIVERY_EN |
+			WMI_STA_PS_UAPSD_AC3_TRIGGER_EN;
+		break;
+	case IEEE80211_AC_VI:
+		value = WMI_STA_PS_UAPSD_AC2_DELIVERY_EN |
+			WMI_STA_PS_UAPSD_AC2_TRIGGER_EN;
+		break;
+	case IEEE80211_AC_BE:
+		value = WMI_STA_PS_UAPSD_AC1_DELIVERY_EN |
+			WMI_STA_PS_UAPSD_AC1_TRIGGER_EN;
+		break;
+	case IEEE80211_AC_BK:
+		value = WMI_STA_PS_UAPSD_AC0_DELIVERY_EN |
+			WMI_STA_PS_UAPSD_AC0_TRIGGER_EN;
+		break;
+	}
+
+	if (enable)
+		arvif->u.sta.uapsd |= value;
+	else
+		arvif->u.sta.uapsd &= ~value;
+
+	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+					  WMI_STA_PS_PARAM_UAPSD,
+					  arvif->u.sta.uapsd);
+	if (ret) {
+		ath10k_warn("could not set uapsd params %d\n", ret);
+		goto exit;
+	}
+
+	if (arvif->u.sta.uapsd)
+		value = WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD;
+	else
+		value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
+
+	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+					  WMI_STA_PS_PARAM_RX_WAKE_POLICY,
+					  value);
+	if (ret)
+		ath10k_warn("could not set rx wake param %d\n", ret);
+
+exit:
+	return ret;
+}
+
+static int ath10k_conf_tx(struct ieee80211_hw *hw,
+			  struct ieee80211_vif *vif, u16 ac,
+			  const struct ieee80211_tx_queue_params *params)
+{
+	struct ath10k *ar = hw->priv;
+	struct wmi_wmm_params_arg *p = NULL;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	switch (ac) {
+	case IEEE80211_AC_VO:
+		p = &ar->wmm_params.ac_vo;
+		break;
+	case IEEE80211_AC_VI:
+		p = &ar->wmm_params.ac_vi;
+		break;
+	case IEEE80211_AC_BE:
+		p = &ar->wmm_params.ac_be;
+		break;
+	case IEEE80211_AC_BK:
+		p = &ar->wmm_params.ac_bk;
+		break;
+	}
+
+	if (WARN_ON(!p)) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	p->cwmin = params->cw_min;
+	p->cwmax = params->cw_max;
+	p->aifs = params->aifs;
+
+	/*
+	 * The channel time duration programmed in the HW is in absolute
+	 * microseconds, while mac80211 gives the txop in units of
+	 * 32 microseconds.
+	 */
+	p->txop = params->txop * 32;
+
+	/* FIXME: FW accepts wmm params per hw, not per vif */
+	ret = ath10k_wmi_pdev_set_wmm_params(ar, &ar->wmm_params);
+	if (ret) {
+		ath10k_warn("could not set wmm params %d\n", ret);
+		goto exit;
+	}
+
+	ret = ath10k_conf_tx_uapsd(ar, vif, ac, params->uapsd);
+	if (ret)
+		ath10k_warn("could not set sta uapsd %d\n", ret);
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+#define ATH10K_ROC_TIMEOUT_HZ (2*HZ)
+
+static int ath10k_remain_on_channel(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif,
+				    struct ieee80211_channel *chan,
+				    int duration,
+				    enum ieee80211_roc_type type)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct wmi_start_scan_arg arg;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	if (ar->scan.in_progress) {
+		spin_unlock_bh(&ar->data_lock);
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	INIT_COMPLETION(ar->scan.started);
+	INIT_COMPLETION(ar->scan.completed);
+	INIT_COMPLETION(ar->scan.on_channel);
+	ar->scan.in_progress = true;
+	ar->scan.aborting = false;
+	ar->scan.is_roc = true;
+	ar->scan.vdev_id = arvif->vdev_id;
+	ar->scan.roc_freq = chan->center_freq;
+	spin_unlock_bh(&ar->data_lock);
+
+	memset(&arg, 0, sizeof(arg));
+	ath10k_wmi_start_scan_init(ar, &arg);
+	arg.vdev_id = arvif->vdev_id;
+	arg.scan_id = ATH10K_SCAN_ID;
+	arg.n_channels = 1;
+	arg.channels[0] = chan->center_freq;
+	arg.dwell_time_active = duration;
+	arg.dwell_time_passive = duration;
+	arg.max_scan_time = 2 * duration;
+	arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
+	arg.scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ;
+
+	ret = ath10k_start_scan(ar, &arg);
+	if (ret) {
+		ath10k_warn("could not start roc scan (%d)\n", ret);
+		spin_lock_bh(&ar->data_lock);
+		ar->scan.in_progress = false;
+		spin_unlock_bh(&ar->data_lock);
+		goto exit;
+	}
+
+	ret = wait_for_completion_timeout(&ar->scan.on_channel, 3*HZ);
+	if (ret == 0) {
+		ath10k_warn("could not switch to channel for roc scan\n");
+		ath10k_abort_scan(ar);
+		ret = -ETIMEDOUT;
+		goto exit;
+	}
+
+	ret = 0;
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw)
+{
+	struct ath10k *ar = hw->priv;
+
+	mutex_lock(&ar->conf_mutex);
+	ath10k_abort_scan(ar);
+	mutex_unlock(&ar->conf_mutex);
+
+	return 0;
+}
+
+/*
+ * Both RTS and Fragmentation threshold are interface-specific
+ * in ath10k, but device-specific in mac80211.
+ */
+static void ath10k_set_rts_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+	struct ath10k_generic_iter *ar_iter = data;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	u32 rts = ar_iter->ar->hw->wiphy->rts_threshold;
+
+	rts = min_t(u32, rts, ATH10K_RTS_MAX);
+
+	ar_iter->ret = ath10k_wmi_vdev_set_param(ar_iter->ar, arvif->vdev_id,
+						 WMI_VDEV_PARAM_RTS_THRESHOLD,
+						 rts);
+	if (ar_iter->ret)
+		ath10k_warn("Failed to set RTS threshold for VDEV: %d\n",
+			    arvif->vdev_id);
+	else
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "Set RTS threshold: %d for VDEV: %d\n",
+			   rts, arvif->vdev_id);
+}
+
+static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct ath10k_generic_iter ar_iter;
+	struct ath10k *ar = hw->priv;
+
+	memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
+	ar_iter.ar = ar;
+
+	mutex_lock(&ar->conf_mutex);
+	ieee80211_iterate_active_interfaces(hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+					    ath10k_set_rts_iter, &ar_iter);
+	mutex_unlock(&ar->conf_mutex);
+
+	return ar_iter.ret;
+}
+
+static void ath10k_set_frag_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+	struct ath10k_generic_iter *ar_iter = data;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	u32 frag = ar_iter->ar->hw->wiphy->frag_threshold;
+	int ret;
+
+	frag = clamp_t(u32, frag,
+		       ATH10K_FRAGMT_THRESHOLD_MIN,
+		       ATH10K_FRAGMT_THRESHOLD_MAX);
+
+	ret = ath10k_wmi_vdev_set_param(ar_iter->ar, arvif->vdev_id,
+					WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+					frag);
+
+	ar_iter->ret = ret;
+	if (ar_iter->ret)
+		ath10k_warn("Failed to set frag threshold for VDEV: %d\n",
+			    arvif->vdev_id);
+	else
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "Set frag threshold: %d for VDEV: %d\n",
+			   frag, arvif->vdev_id);
+}
+
+static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct ath10k_generic_iter ar_iter;
+	struct ath10k *ar = hw->priv;
+
+	memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
+	ar_iter.ar = ar;
+
+	mutex_lock(&ar->conf_mutex);
+	ieee80211_iterate_active_interfaces(hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+					    ath10k_set_frag_iter, &ar_iter);
+	mutex_unlock(&ar->conf_mutex);
+
+	return ar_iter.ret;
+}
+
+static void ath10k_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
+{
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	/* mac80211 doesn't care if we really xmit queued frames or not
+	 * we'll collect those frames either way if we stop/delete vdevs */
+	if (drop)
+		return;
+
+	ret = wait_event_timeout(ar->htt->empty_tx_wq, ({
+			bool empty;
+			spin_lock_bh(&ar->htt->tx_lock);
+			empty = bitmap_empty(ar->htt->used_msdu_ids,
+					     ar->htt->max_num_pending_tx);
+			spin_unlock_bh(&ar->htt->tx_lock);
+			(empty);
+		}), ATH10K_FLUSH_TIMEOUT_HZ);
+	if (ret <= 0)
+		ath10k_warn("tx not flushed\n");
+}
+
+/* TODO: Implement this function properly
+ * For now it is needed to reply to Probe Requests in IBSS mode.
+ * Propably we need this information from FW.
+ */
+static int ath10k_tx_last_beacon(struct ieee80211_hw *hw)
+{
+	return 1;
+}
+
+static const struct ieee80211_ops ath10k_ops = {
+	.tx				= ath10k_tx,
+	.start				= ath10k_start,
+	.stop				= ath10k_stop,
+	.config				= ath10k_config,
+	.add_interface			= ath10k_add_interface,
+	.remove_interface		= ath10k_remove_interface,
+	.configure_filter		= ath10k_configure_filter,
+	.bss_info_changed		= ath10k_bss_info_changed,
+	.hw_scan			= ath10k_hw_scan,
+	.cancel_hw_scan			= ath10k_cancel_hw_scan,
+	.set_key			= ath10k_set_key,
+	.sta_state			= ath10k_sta_state,
+	.conf_tx			= ath10k_conf_tx,
+	.remain_on_channel		= ath10k_remain_on_channel,
+	.cancel_remain_on_channel	= ath10k_cancel_remain_on_channel,
+	.set_rts_threshold		= ath10k_set_rts_threshold,
+	.set_frag_threshold		= ath10k_set_frag_threshold,
+	.flush				= ath10k_flush,
+	.tx_last_beacon			= ath10k_tx_last_beacon,
+};
+
+#define RATETAB_ENT(_rate, _rateid, _flags) { \
+	.bitrate		= (_rate), \
+	.flags			= (_flags), \
+	.hw_value		= (_rateid), \
+}
+
+#define CHAN2G(_channel, _freq, _flags) { \
+	.band			= IEEE80211_BAND_2GHZ, \
+	.hw_value		= (_channel), \
+	.center_freq		= (_freq), \
+	.flags			= (_flags), \
+	.max_antenna_gain	= 0, \
+	.max_power		= 30, \
+}
+
+#define CHAN5G(_channel, _freq, _flags) { \
+	.band			= IEEE80211_BAND_5GHZ, \
+	.hw_value		= (_channel), \
+	.center_freq		= (_freq), \
+	.flags			= (_flags), \
+	.max_antenna_gain	= 0, \
+	.max_power		= 30, \
+}
+
+static const struct ieee80211_channel ath10k_2ghz_channels[] = {
+	CHAN2G(1, 2412, 0),
+	CHAN2G(2, 2417, 0),
+	CHAN2G(3, 2422, 0),
+	CHAN2G(4, 2427, 0),
+	CHAN2G(5, 2432, 0),
+	CHAN2G(6, 2437, 0),
+	CHAN2G(7, 2442, 0),
+	CHAN2G(8, 2447, 0),
+	CHAN2G(9, 2452, 0),
+	CHAN2G(10, 2457, 0),
+	CHAN2G(11, 2462, 0),
+	CHAN2G(12, 2467, 0),
+	CHAN2G(13, 2472, 0),
+	CHAN2G(14, 2484, 0),
+};
+
+static const struct ieee80211_channel ath10k_5ghz_channels[] = {
+	CHAN5G(36, 5180, 14),
+	CHAN5G(40, 5200, 15),
+	CHAN5G(44, 5220, 16),
+	CHAN5G(48, 5240, 17),
+	CHAN5G(52, 5260, 18),
+	CHAN5G(56, 5280, 19),
+	CHAN5G(60, 5300, 20),
+	CHAN5G(64, 5320, 21),
+	CHAN5G(100, 5500, 22),
+	CHAN5G(104, 5520, 23),
+	CHAN5G(108, 5540, 24),
+	CHAN5G(112, 5560, 25),
+	CHAN5G(116, 5580, 26),
+	CHAN5G(120, 5600, 27),
+	CHAN5G(124, 5620, 28),
+	CHAN5G(128, 5640, 29),
+	CHAN5G(132, 5660, 30),
+	CHAN5G(136, 5680, 31),
+	CHAN5G(140, 5700, 32),
+	CHAN5G(149, 5745, 33),
+	CHAN5G(153, 5765, 34),
+	CHAN5G(157, 5785, 35),
+	CHAN5G(161, 5805, 36),
+	CHAN5G(165, 5825, 37),
+};
+
+static struct ieee80211_rate ath10k_rates[] = {
+	/* CCK */
+	RATETAB_ENT(10,  0x82, 0),
+	RATETAB_ENT(20,  0x84, 0),
+	RATETAB_ENT(55,  0x8b, 0),
+	RATETAB_ENT(110, 0x96, 0),
+	/* OFDM */
+	RATETAB_ENT(60,  0x0c, 0),
+	RATETAB_ENT(90,  0x12, 0),
+	RATETAB_ENT(120, 0x18, 0),
+	RATETAB_ENT(180, 0x24, 0),
+	RATETAB_ENT(240, 0x30, 0),
+	RATETAB_ENT(360, 0x48, 0),
+	RATETAB_ENT(480, 0x60, 0),
+	RATETAB_ENT(540, 0x6c, 0),
+};
+
+#define ath10k_a_rates (ath10k_rates + 4)
+#define ath10k_a_rates_size (ARRAY_SIZE(ath10k_rates) - 4)
+#define ath10k_g_rates (ath10k_rates + 0)
+#define ath10k_g_rates_size (ARRAY_SIZE(ath10k_rates))
+
+struct ath10k *ath10k_mac_create(void)
+{
+	struct ieee80211_hw *hw;
+	struct ath10k *ar;
+
+	hw = ieee80211_alloc_hw(sizeof(struct ath10k), &ath10k_ops);
+	if (!hw)
+		return NULL;
+
+	ar = hw->priv;
+	ar->hw = hw;
+
+	return ar;
+}
+
+void ath10k_mac_destroy(struct ath10k *ar)
+{
+	ieee80211_free_hw(ar->hw);
+}
+
+static const struct ieee80211_iface_limit ath10k_if_limits[] = {
+	{
+	.max	= 8,
+	.types	= BIT(NL80211_IFTYPE_STATION)
+		| BIT(NL80211_IFTYPE_P2P_CLIENT)
+		| BIT(NL80211_IFTYPE_P2P_GO)
+		| BIT(NL80211_IFTYPE_AP)
+	}
+};
+
+static const struct ieee80211_iface_combination ath10k_if_comb = {
+	.limits = ath10k_if_limits,
+	.n_limits = ARRAY_SIZE(ath10k_if_limits),
+	.max_interfaces = 8,
+	.num_different_channels = 1,
+	.beacon_int_infra_match = true,
+};
+
+static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
+{
+	struct ieee80211_sta_vht_cap vht_cap = {0};
+	u16 mcs_map;
+
+	vht_cap.vht_supported = 1;
+	vht_cap.cap = ar->vht_cap_info;
+
+	/* FIXME: check dynamically how many streams board supports */
+	mcs_map = IEEE80211_VHT_MCS_SUPPORT_0_9 << 0 |
+		IEEE80211_VHT_MCS_SUPPORT_0_9 << 2 |
+		IEEE80211_VHT_MCS_SUPPORT_0_9 << 4 |
+		IEEE80211_VHT_MCS_NOT_SUPPORTED << 6 |
+		IEEE80211_VHT_MCS_NOT_SUPPORTED << 8 |
+		IEEE80211_VHT_MCS_NOT_SUPPORTED << 10 |
+		IEEE80211_VHT_MCS_NOT_SUPPORTED << 12 |
+		IEEE80211_VHT_MCS_NOT_SUPPORTED << 14;
+
+	vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
+	vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);
+
+	return vht_cap;
+}
+
+static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar)
+{
+	int i;
+	struct ieee80211_sta_ht_cap ht_cap = {0};
+
+	if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED))
+		return ht_cap;
+
+	ht_cap.ht_supported = 1;
+	ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+	ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
+	ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+	ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40;
+	ht_cap.cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI)
+		ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI)
+		ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) {
+		u32 smps;
+
+		smps   = WLAN_HT_CAP_SM_PS_DYNAMIC;
+		smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+		ht_cap.cap |= smps;
+	}
+
+	if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC)
+		ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) {
+		u32 stbc;
+
+		stbc   = ar->ht_cap_info;
+		stbc  &= WMI_HT_CAP_RX_STBC;
+		stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT;
+		stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT;
+		stbc  &= IEEE80211_HT_CAP_RX_STBC;
+
+		ht_cap.cap |= stbc;
+	}
+
+	if (ar->ht_cap_info & WMI_HT_CAP_LDPC)
+		ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT)
+		ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT;
+
+	/* max AMSDU is implicitly taken from vht_cap_info */
+	if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK)
+		ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
+
+	for (i = 0; i < WMI_MAX_SPATIAL_STREAM; i++)
+		ht_cap.mcs.rx_mask[i] = 0xFF;
+
+	ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
+
+	return ht_cap;
+}
+
+
+static void ath10k_get_arvif_iter(void *data, u8 *mac,
+				  struct ieee80211_vif *vif)
+{
+	struct ath10k_vif_iter *arvif_iter = data;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+	if (arvif->vdev_id == arvif_iter->vdev_id)
+		arvif_iter->arvif = arvif;
+}
+
+struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id)
+{
+	struct ath10k_vif_iter arvif_iter;
+	u32 flags;
+
+	memset(&arvif_iter, 0, sizeof(struct ath10k_vif_iter));
+	arvif_iter.vdev_id = vdev_id;
+
+	flags = IEEE80211_IFACE_ITER_RESUME_ALL;
+	ieee80211_iterate_active_interfaces_atomic(ar->hw,
+						   flags,
+						   ath10k_get_arvif_iter,
+						   &arvif_iter);
+	if (!arvif_iter.arvif) {
+		ath10k_warn("No VIF found for VDEV: %d\n", vdev_id);
+		return NULL;
+	}
+
+	return arvif_iter.arvif;
+}
+
+int ath10k_mac_register(struct ath10k *ar)
+{
+	struct ieee80211_supported_band *band;
+	struct ieee80211_sta_vht_cap vht_cap;
+	struct ieee80211_sta_ht_cap ht_cap;
+	void *channels;
+	int ret;
+
+	SET_IEEE80211_PERM_ADDR(ar->hw, ar->mac_addr);
+
+	SET_IEEE80211_DEV(ar->hw, ar->dev);
+
+	ht_cap = ath10k_get_ht_cap(ar);
+	vht_cap = ath10k_create_vht_cap(ar);
+
+	if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
+		channels = kmemdup(ath10k_2ghz_channels,
+				   sizeof(ath10k_2ghz_channels),
+				   GFP_KERNEL);
+		if (!channels)
+			return -ENOMEM;
+
+		band = &ar->mac.sbands[IEEE80211_BAND_2GHZ];
+		band->n_channels = ARRAY_SIZE(ath10k_2ghz_channels);
+		band->channels = channels;
+		band->n_bitrates = ath10k_g_rates_size;
+		band->bitrates = ath10k_g_rates;
+		band->ht_cap = ht_cap;
+
+		/* vht is not supported in 2.4 GHz */
+
+		ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
+	}
+
+	if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) {
+		channels = kmemdup(ath10k_5ghz_channels,
+				   sizeof(ath10k_5ghz_channels),
+				   GFP_KERNEL);
+		if (!channels) {
+			if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
+				band = &ar->mac.sbands[IEEE80211_BAND_2GHZ];
+				kfree(band->channels);
+			}
+			return -ENOMEM;
+		}
+
+		band = &ar->mac.sbands[IEEE80211_BAND_5GHZ];
+		band->n_channels = ARRAY_SIZE(ath10k_5ghz_channels);
+		band->channels = channels;
+		band->n_bitrates = ath10k_a_rates_size;
+		band->bitrates = ath10k_a_rates;
+		band->ht_cap = ht_cap;
+		band->vht_cap = vht_cap;
+		ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band;
+	}
+
+	ar->hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC) |
+		BIT(NL80211_IFTYPE_AP) |
+		BIT(NL80211_IFTYPE_P2P_CLIENT) |
+		BIT(NL80211_IFTYPE_P2P_GO);
+
+	ar->hw->flags = IEEE80211_HW_SIGNAL_DBM |
+			IEEE80211_HW_SUPPORTS_PS |
+			IEEE80211_HW_SUPPORTS_DYNAMIC_PS |
+			IEEE80211_HW_SUPPORTS_UAPSD |
+			IEEE80211_HW_MFP_CAPABLE |
+			IEEE80211_HW_REPORTS_TX_ACK_STATUS |
+			IEEE80211_HW_HAS_RATE_CONTROL |
+			IEEE80211_HW_SUPPORTS_STATIC_SMPS |
+			IEEE80211_HW_WANT_MONITOR_VIF |
+			IEEE80211_HW_AP_LINK_PS;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS)
+		ar->hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) {
+		ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
+		ar->hw->flags |= IEEE80211_HW_TX_AMPDU_SETUP_IN_HW;
+	}
+
+	ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID;
+	ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN;
+
+	ar->hw->vif_data_size = sizeof(struct ath10k_vif);
+
+	ar->hw->channel_change_time = 5000;
+	ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
+
+	ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+	ar->hw->wiphy->max_remain_on_channel_duration = 5000;
+
+	ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
+	/*
+	 * on LL hardware queues are managed entirely by the FW
+	 * so we only advertise to mac we can do the queues thing
+	 */
+	ar->hw->queues = 4;
+
+	ar->hw->wiphy->iface_combinations = &ath10k_if_comb;
+	ar->hw->wiphy->n_iface_combinations = 1;
+
+	ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy,
+			    ath10k_reg_notifier);
+	if (ret) {
+		ath10k_err("Regulatory initialization failed\n");
+		return ret;
+	}
+
+	ret = ieee80211_register_hw(ar->hw);
+	if (ret) {
+		ath10k_err("ieee80211 registration failed: %d\n", ret);
+		return ret;
+	}
+
+	if (!ath_is_world_regd(&ar->ath_common.regulatory)) {
+		ret = regulatory_hint(ar->hw->wiphy,
+				      ar->ath_common.regulatory.alpha2);
+		if (ret)
+			goto exit;
+	}
+
+	return 0;
+exit:
+	ieee80211_unregister_hw(ar->hw);
+	return ret;
+}
+
+void ath10k_mac_unregister(struct ath10k *ar)
+{
+	ieee80211_unregister_hw(ar->hw);
+
+	kfree(ar->mac.sbands[IEEE80211_BAND_2GHZ].channels);
+	kfree(ar->mac.sbands[IEEE80211_BAND_5GHZ].channels);
+
+	SET_IEEE80211_DEV(ar->hw, NULL);
+}
diff --git a/drivers/net/wireless/ath/ath10k/mac.h b/drivers/net/wireless/ath/ath10k/mac.h
new file mode 100644
index 000000000000..27fc92e58829
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/mac.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _MAC_H_
+#define _MAC_H_
+
+#include <net/mac80211.h>
+#include "core.h"
+
+struct ath10k_generic_iter {
+	struct ath10k *ar;
+	int ret;
+};
+
+struct ath10k *ath10k_mac_create(void);
+void ath10k_mac_destroy(struct ath10k *ar);
+int ath10k_mac_register(struct ath10k *ar);
+void ath10k_mac_unregister(struct ath10k *ar);
+struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id);
+void ath10k_reset_scan(unsigned long ptr);
+void ath10k_offchan_tx_purge(struct ath10k *ar);
+void ath10k_offchan_tx_work(struct work_struct *work);
+
+static inline struct ath10k_vif *ath10k_vif_to_arvif(struct ieee80211_vif *vif)
+{
+	return (struct ath10k_vif *)vif->drv_priv;
+}
+
+static inline void ath10k_tx_h_seq_no(struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_vif *vif = info->control.vif;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+	if (info->flags  & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		if (arvif->tx_seq_no == 0)
+			arvif->tx_seq_no = 0x1000;
+
+		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			arvif->tx_seq_no += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(arvif->tx_seq_no);
+	}
+}
+
+#endif /* _MAC_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
new file mode 100644
index 000000000000..8e4e8327d33e
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -0,0 +1,2506 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include "core.h"
+#include "debug.h"
+
+#include "targaddrs.h"
+#include "bmi.h"
+
+#include "hif.h"
+#include "htc.h"
+
+#include "ce.h"
+#include "pci.h"
+
+unsigned int ath10k_target_ps;
+module_param(ath10k_target_ps, uint, 0644);
+MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option");
+
+#define QCA988X_1_0_DEVICE_ID	(0xabcd)
+#define QCA988X_2_0_DEVICE_ID	(0x003c)
+
+static DEFINE_PCI_DEVICE_TABLE(ath10k_pci_id_table) = {
+	{ PCI_VDEVICE(ATHEROS, QCA988X_1_0_DEVICE_ID) }, /* PCI-E QCA988X V1 */
+	{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
+	{0}
+};
+
+static int ath10k_pci_diag_read_access(struct ath10k *ar, u32 address,
+				       u32 *data);
+
+static void ath10k_pci_process_ce(struct ath10k *ar);
+static int ath10k_pci_post_rx(struct ath10k *ar);
+static int ath10k_pci_post_rx_pipe(struct hif_ce_pipe_info *pipe_info,
+					     int num);
+static void ath10k_pci_rx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info);
+static void ath10k_pci_stop_ce(struct ath10k *ar);
+
+static const struct ce_attr host_ce_config_wlan[] = {
+	/* host->target HTC control and raw streams */
+	{ /* CE0 */ CE_ATTR_FLAGS, 0, 16, 256, 0, NULL,},
+	/* could be moved to share CE3 */
+	/* target->host HTT + HTC control */
+	{ /* CE1 */ CE_ATTR_FLAGS, 0, 0, 512, 512, NULL,},
+	/* target->host WMI */
+	{ /* CE2 */ CE_ATTR_FLAGS, 0, 0, 2048, 32, NULL,},
+	/* host->target WMI */
+	{ /* CE3 */ CE_ATTR_FLAGS, 0, 32, 2048, 0, NULL,},
+	/* host->target HTT */
+	{ /* CE4 */ CE_ATTR_FLAGS | CE_ATTR_DIS_INTR, 0,
+		    CE_HTT_H2T_MSG_SRC_NENTRIES, 256, 0, NULL,},
+	/* unused */
+	{ /* CE5 */ CE_ATTR_FLAGS, 0, 0, 0, 0, NULL,},
+	/* Target autonomous hif_memcpy */
+	{ /* CE6 */ CE_ATTR_FLAGS, 0, 0, 0, 0, NULL,},
+	/* ce_diag, the Diagnostic Window */
+	{ /* CE7 */ CE_ATTR_FLAGS, 0, 2, DIAG_TRANSFER_LIMIT, 2, NULL,},
+};
+
+/* Target firmware's Copy Engine configuration. */
+static const struct ce_pipe_config target_ce_config_wlan[] = {
+	/* host->target HTC control and raw streams */
+	{ /* CE0 */ 0, PIPEDIR_OUT, 32, 256, CE_ATTR_FLAGS, 0,},
+	/* target->host HTT + HTC control */
+	{ /* CE1 */ 1, PIPEDIR_IN, 32, 512, CE_ATTR_FLAGS, 0,},
+	/* target->host WMI */
+	{ /* CE2 */ 2, PIPEDIR_IN, 32, 2048, CE_ATTR_FLAGS, 0,},
+	/* host->target WMI */
+	{ /* CE3 */ 3, PIPEDIR_OUT, 32, 2048, CE_ATTR_FLAGS, 0,},
+	/* host->target HTT */
+	{ /* CE4 */ 4, PIPEDIR_OUT, 256, 256, CE_ATTR_FLAGS, 0,},
+	/* NB: 50% of src nentries, since tx has 2 frags */
+	/* unused */
+	{ /* CE5 */ 5, PIPEDIR_OUT, 32, 2048, CE_ATTR_FLAGS, 0,},
+	/* Reserved for target autonomous hif_memcpy */
+	{ /* CE6 */ 6, PIPEDIR_INOUT, 32, 4096, CE_ATTR_FLAGS, 0,},
+	/* CE7 used only by Host */
+};
+
+/*
+ * Diagnostic read/write access is provided for startup/config/debug usage.
+ * Caller must guarantee proper alignment, when applicable, and single user
+ * at any moment.
+ */
+static int ath10k_pci_diag_read_mem(struct ath10k *ar, u32 address, void *data,
+				    int nbytes)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ret = 0;
+	u32 buf;
+	unsigned int completed_nbytes, orig_nbytes, remaining_bytes;
+	unsigned int id;
+	unsigned int flags;
+	struct ce_state *ce_diag;
+	/* Host buffer address in CE space */
+	u32 ce_data;
+	dma_addr_t ce_data_base = 0;
+	void *data_buf = NULL;
+	int i;
+
+	/*
+	 * This code cannot handle reads to non-memory space. Redirect to the
+	 * register read fn but preserve the multi word read capability of
+	 * this fn
+	 */
+	if (address < DRAM_BASE_ADDRESS) {
+		if (!IS_ALIGNED(address, 4) ||
+		    !IS_ALIGNED((unsigned long)data, 4))
+			return -EIO;
+
+		while ((nbytes >= 4) &&  ((ret = ath10k_pci_diag_read_access(
+					   ar, address, (u32 *)data)) == 0)) {
+			nbytes -= sizeof(u32);
+			address += sizeof(u32);
+			data += sizeof(u32);
+		}
+		return ret;
+	}
+
+	ce_diag = ar_pci->ce_diag;
+
+	/*
+	 * Allocate a temporary bounce buffer to hold caller's data
+	 * to be DMA'ed from Target. This guarantees
+	 *   1) 4-byte alignment
+	 *   2) Buffer in DMA-able space
+	 */
+	orig_nbytes = nbytes;
+	data_buf = (unsigned char *)pci_alloc_consistent(ar_pci->pdev,
+							 orig_nbytes,
+							 &ce_data_base);
+
+	if (!data_buf) {
+		ret = -ENOMEM;
+		goto done;
+	}
+	memset(data_buf, 0, orig_nbytes);
+
+	remaining_bytes = orig_nbytes;
+	ce_data = ce_data_base;
+	while (remaining_bytes) {
+		nbytes = min_t(unsigned int, remaining_bytes,
+			       DIAG_TRANSFER_LIMIT);
+
+		ret = ath10k_ce_recv_buf_enqueue(ce_diag, NULL, ce_data);
+		if (ret != 0)
+			goto done;
+
+		/* Request CE to send from Target(!) address to Host buffer */
+		/*
+		 * The address supplied by the caller is in the
+		 * Target CPU virtual address space.
+		 *
+		 * In order to use this address with the diagnostic CE,
+		 * convert it from Target CPU virtual address space
+		 * to CE address space
+		 */
+		ath10k_pci_wake(ar);
+		address = TARG_CPU_SPACE_TO_CE_SPACE(ar, ar_pci->mem,
+						     address);
+		ath10k_pci_sleep(ar);
+
+		ret = ath10k_ce_send(ce_diag, NULL, (u32)address, nbytes, 0,
+				 0);
+		if (ret)
+			goto done;
+
+		i = 0;
+		while (ath10k_ce_completed_send_next(ce_diag, NULL, &buf,
+						     &completed_nbytes,
+						     &id) != 0) {
+			mdelay(1);
+			if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
+				ret = -EBUSY;
+				goto done;
+			}
+		}
+
+		if (nbytes != completed_nbytes) {
+			ret = -EIO;
+			goto done;
+		}
+
+		if (buf != (u32) address) {
+			ret = -EIO;
+			goto done;
+		}
+
+		i = 0;
+		while (ath10k_ce_completed_recv_next(ce_diag, NULL, &buf,
+						     &completed_nbytes,
+						     &id, &flags) != 0) {
+			mdelay(1);
+
+			if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
+				ret = -EBUSY;
+				goto done;
+			}
+		}
+
+		if (nbytes != completed_nbytes) {
+			ret = -EIO;
+			goto done;
+		}
+
+		if (buf != ce_data) {
+			ret = -EIO;
+			goto done;
+		}
+
+		remaining_bytes -= nbytes;
+		address += nbytes;
+		ce_data += nbytes;
+	}
+
+done:
+	if (ret == 0) {
+		/* Copy data from allocated DMA buf to caller's buf */
+		WARN_ON_ONCE(orig_nbytes & 3);
+		for (i = 0; i < orig_nbytes / sizeof(__le32); i++) {
+			((u32 *)data)[i] =
+				__le32_to_cpu(((__le32 *)data_buf)[i]);
+		}
+	} else
+		ath10k_dbg(ATH10K_DBG_PCI, "%s failure (0x%x)\n",
+			   __func__, address);
+
+	if (data_buf)
+		pci_free_consistent(ar_pci->pdev, orig_nbytes,
+				    data_buf, ce_data_base);
+
+	return ret;
+}
+
+/* Read 4-byte aligned data from Target memory or register */
+static int ath10k_pci_diag_read_access(struct ath10k *ar, u32 address,
+				       u32 *data)
+{
+	/* Assume range doesn't cross this boundary */
+	if (address >= DRAM_BASE_ADDRESS)
+		return ath10k_pci_diag_read_mem(ar, address, data, sizeof(u32));
+
+	ath10k_pci_wake(ar);
+	*data = ath10k_pci_read32(ar, address);
+	ath10k_pci_sleep(ar);
+	return 0;
+}
+
+static int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
+				     const void *data, int nbytes)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ret = 0;
+	u32 buf;
+	unsigned int completed_nbytes, orig_nbytes, remaining_bytes;
+	unsigned int id;
+	unsigned int flags;
+	struct ce_state *ce_diag;
+	void *data_buf = NULL;
+	u32 ce_data;	/* Host buffer address in CE space */
+	dma_addr_t ce_data_base = 0;
+	int i;
+
+	ce_diag = ar_pci->ce_diag;
+
+	/*
+	 * Allocate a temporary bounce buffer to hold caller's data
+	 * to be DMA'ed to Target. This guarantees
+	 *   1) 4-byte alignment
+	 *   2) Buffer in DMA-able space
+	 */
+	orig_nbytes = nbytes;
+	data_buf = (unsigned char *)pci_alloc_consistent(ar_pci->pdev,
+							 orig_nbytes,
+							 &ce_data_base);
+	if (!data_buf) {
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	/* Copy caller's data to allocated DMA buf */
+	WARN_ON_ONCE(orig_nbytes & 3);
+	for (i = 0; i < orig_nbytes / sizeof(__le32); i++)
+		((__le32 *)data_buf)[i] = __cpu_to_le32(((u32 *)data)[i]);
+
+	/*
+	 * The address supplied by the caller is in the
+	 * Target CPU virtual address space.
+	 *
+	 * In order to use this address with the diagnostic CE,
+	 * convert it from
+	 *    Target CPU virtual address space
+	 * to
+	 *    CE address space
+	 */
+	ath10k_pci_wake(ar);
+	address = TARG_CPU_SPACE_TO_CE_SPACE(ar, ar_pci->mem, address);
+	ath10k_pci_sleep(ar);
+
+	remaining_bytes = orig_nbytes;
+	ce_data = ce_data_base;
+	while (remaining_bytes) {
+		/* FIXME: check cast */
+		nbytes = min_t(int, remaining_bytes, DIAG_TRANSFER_LIMIT);
+
+		/* Set up to receive directly into Target(!) address */
+		ret = ath10k_ce_recv_buf_enqueue(ce_diag, NULL, address);
+		if (ret != 0)
+			goto done;
+
+		/*
+		 * Request CE to send caller-supplied data that
+		 * was copied to bounce buffer to Target(!) address.
+		 */
+		ret = ath10k_ce_send(ce_diag, NULL, (u32) ce_data,
+				     nbytes, 0, 0);
+		if (ret != 0)
+			goto done;
+
+		i = 0;
+		while (ath10k_ce_completed_send_next(ce_diag, NULL, &buf,
+						     &completed_nbytes,
+						     &id) != 0) {
+			mdelay(1);
+
+			if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
+				ret = -EBUSY;
+				goto done;
+			}
+		}
+
+		if (nbytes != completed_nbytes) {
+			ret = -EIO;
+			goto done;
+		}
+
+		if (buf != ce_data) {
+			ret = -EIO;
+			goto done;
+		}
+
+		i = 0;
+		while (ath10k_ce_completed_recv_next(ce_diag, NULL, &buf,
+						     &completed_nbytes,
+						     &id, &flags) != 0) {
+			mdelay(1);
+
+			if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
+				ret = -EBUSY;
+				goto done;
+			}
+		}
+
+		if (nbytes != completed_nbytes) {
+			ret = -EIO;
+			goto done;
+		}
+
+		if (buf != address) {
+			ret = -EIO;
+			goto done;
+		}
+
+		remaining_bytes -= nbytes;
+		address += nbytes;
+		ce_data += nbytes;
+	}
+
+done:
+	if (data_buf) {
+		pci_free_consistent(ar_pci->pdev, orig_nbytes, data_buf,
+				    ce_data_base);
+	}
+
+	if (ret != 0)
+		ath10k_dbg(ATH10K_DBG_PCI, "%s failure (0x%x)\n", __func__,
+			   address);
+
+	return ret;
+}
+
+/* Write 4B data to Target memory or register */
+static int ath10k_pci_diag_write_access(struct ath10k *ar, u32 address,
+					u32 data)
+{
+	/* Assume range doesn't cross this boundary */
+	if (address >= DRAM_BASE_ADDRESS)
+		return ath10k_pci_diag_write_mem(ar, address, &data,
+						 sizeof(u32));
+
+	ath10k_pci_wake(ar);
+	ath10k_pci_write32(ar, address, data);
+	ath10k_pci_sleep(ar);
+	return 0;
+}
+
+static bool ath10k_pci_target_is_awake(struct ath10k *ar)
+{
+	void __iomem *mem = ath10k_pci_priv(ar)->mem;
+	u32 val;
+	val = ioread32(mem + PCIE_LOCAL_BASE_ADDRESS +
+		       RTC_STATE_ADDRESS);
+	return (RTC_STATE_V_GET(val) == RTC_STATE_V_ON);
+}
+
+static void ath10k_pci_wait(struct ath10k *ar)
+{
+	int n = 100;
+
+	while (n-- && !ath10k_pci_target_is_awake(ar))
+		msleep(10);
+
+	if (n < 0)
+		ath10k_warn("Unable to wakeup target\n");
+}
+
+void ath10k_do_pci_wake(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	void __iomem *pci_addr = ar_pci->mem;
+	int tot_delay = 0;
+	int curr_delay = 5;
+
+	if (atomic_read(&ar_pci->keep_awake_count) == 0) {
+		/* Force AWAKE */
+		iowrite32(PCIE_SOC_WAKE_V_MASK,
+			  pci_addr + PCIE_LOCAL_BASE_ADDRESS +
+			  PCIE_SOC_WAKE_ADDRESS);
+	}
+	atomic_inc(&ar_pci->keep_awake_count);
+
+	if (ar_pci->verified_awake)
+		return;
+
+	for (;;) {
+		if (ath10k_pci_target_is_awake(ar)) {
+			ar_pci->verified_awake = true;
+			break;
+		}
+
+		if (tot_delay > PCIE_WAKE_TIMEOUT) {
+			ath10k_warn("target takes too long to wake up (awake count %d)\n",
+				    atomic_read(&ar_pci->keep_awake_count));
+			break;
+		}
+
+		udelay(curr_delay);
+		tot_delay += curr_delay;
+
+		if (curr_delay < 50)
+			curr_delay += 5;
+	}
+}
+
+void ath10k_do_pci_sleep(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	void __iomem *pci_addr = ar_pci->mem;
+
+	if (atomic_dec_and_test(&ar_pci->keep_awake_count)) {
+		/* Allow sleep */
+		ar_pci->verified_awake = false;
+		iowrite32(PCIE_SOC_WAKE_RESET,
+			  pci_addr + PCIE_LOCAL_BASE_ADDRESS +
+			  PCIE_SOC_WAKE_ADDRESS);
+	}
+}
+
+/*
+ * FIXME: Handle OOM properly.
+ */
+static inline
+struct ath10k_pci_compl *get_free_compl(struct hif_ce_pipe_info *pipe_info)
+{
+	struct ath10k_pci_compl *compl = NULL;
+
+	spin_lock_bh(&pipe_info->pipe_lock);
+	if (list_empty(&pipe_info->compl_free)) {
+		ath10k_warn("Completion buffers are full\n");
+		goto exit;
+	}
+	compl = list_first_entry(&pipe_info->compl_free,
+				 struct ath10k_pci_compl, list);
+	list_del(&compl->list);
+exit:
+	spin_unlock_bh(&pipe_info->pipe_lock);
+	return compl;
+}
+
+/* Called by lower (CE) layer when a send to Target completes. */
+static void ath10k_pci_ce_send_done(struct ce_state *ce_state,
+				    void *transfer_context,
+				    u32 ce_data,
+				    unsigned int nbytes,
+				    unsigned int transfer_id)
+{
+	struct ath10k *ar = ce_state->ar;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct hif_ce_pipe_info *pipe_info =  &ar_pci->pipe_info[ce_state->id];
+	struct ath10k_pci_compl *compl;
+	bool process = false;
+
+	do {
+		/*
+		 * For the send completion of an item in sendlist, just
+		 * increment num_sends_allowed. The upper layer callback will
+		 * be triggered when last fragment is done with send.
+		 */
+		if (transfer_context == CE_SENDLIST_ITEM_CTXT) {
+			spin_lock_bh(&pipe_info->pipe_lock);
+			pipe_info->num_sends_allowed++;
+			spin_unlock_bh(&pipe_info->pipe_lock);
+			continue;
+		}
+
+		compl = get_free_compl(pipe_info);
+		if (!compl)
+			break;
+
+		compl->send_or_recv = HIF_CE_COMPLETE_SEND;
+		compl->ce_state = ce_state;
+		compl->pipe_info = pipe_info;
+		compl->transfer_context = transfer_context;
+		compl->nbytes = nbytes;
+		compl->transfer_id = transfer_id;
+		compl->flags = 0;
+
+		/*
+		 * Add the completion to the processing queue.
+		 */
+		spin_lock_bh(&ar_pci->compl_lock);
+		list_add_tail(&compl->list, &ar_pci->compl_process);
+		spin_unlock_bh(&ar_pci->compl_lock);
+
+		process = true;
+	} while (ath10k_ce_completed_send_next(ce_state,
+							   &transfer_context,
+							   &ce_data, &nbytes,
+							   &transfer_id) == 0);
+
+	/*
+	 * If only some of the items within a sendlist have completed,
+	 * don't invoke completion processing until the entire sendlist
+	 * has been sent.
+	 */
+	if (!process)
+		return;
+
+	ath10k_pci_process_ce(ar);
+}
+
+/* Called by lower (CE) layer when data is received from the Target. */
+static void ath10k_pci_ce_recv_data(struct ce_state *ce_state,
+				    void *transfer_context, u32 ce_data,
+				    unsigned int nbytes,
+				    unsigned int transfer_id,
+				    unsigned int flags)
+{
+	struct ath10k *ar = ce_state->ar;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct hif_ce_pipe_info *pipe_info =  &ar_pci->pipe_info[ce_state->id];
+	struct ath10k_pci_compl *compl;
+	struct sk_buff *skb;
+
+	do {
+		compl = get_free_compl(pipe_info);
+		if (!compl)
+			break;
+
+		compl->send_or_recv = HIF_CE_COMPLETE_RECV;
+		compl->ce_state = ce_state;
+		compl->pipe_info = pipe_info;
+		compl->transfer_context = transfer_context;
+		compl->nbytes = nbytes;
+		compl->transfer_id = transfer_id;
+		compl->flags = flags;
+
+		skb = transfer_context;
+		dma_unmap_single(ar->dev, ATH10K_SKB_CB(skb)->paddr,
+				 skb->len + skb_tailroom(skb),
+				 DMA_FROM_DEVICE);
+		/*
+		 * Add the completion to the processing queue.
+		 */
+		spin_lock_bh(&ar_pci->compl_lock);
+		list_add_tail(&compl->list, &ar_pci->compl_process);
+		spin_unlock_bh(&ar_pci->compl_lock);
+
+	} while (ath10k_ce_completed_recv_next(ce_state,
+							   &transfer_context,
+							   &ce_data, &nbytes,
+							   &transfer_id,
+							   &flags) == 0);
+
+	ath10k_pci_process_ce(ar);
+}
+
+/* Send the first nbytes bytes of the buffer */
+static int ath10k_pci_hif_send_head(struct ath10k *ar, u8 pipe_id,
+				    unsigned int transfer_id,
+				    unsigned int bytes, struct sk_buff *nbuf)
+{
+	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(nbuf);
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct hif_ce_pipe_info *pipe_info = &(ar_pci->pipe_info[pipe_id]);
+	struct ce_state *ce_hdl = pipe_info->ce_hdl;
+	struct ce_sendlist sendlist;
+	unsigned int len;
+	u32 flags = 0;
+	int ret;
+
+	memset(&sendlist, 0, sizeof(struct ce_sendlist));
+
+	len = min(bytes, nbuf->len);
+	bytes -= len;
+
+	if (len & 3)
+		ath10k_warn("skb not aligned to 4-byte boundary (%d)\n", len);
+
+	ath10k_dbg(ATH10K_DBG_PCI,
+		   "pci send data vaddr %p paddr 0x%llx len %d as %d bytes\n",
+		   nbuf->data, (unsigned long long) skb_cb->paddr,
+		   nbuf->len, len);
+	ath10k_dbg_dump(ATH10K_DBG_PCI_DUMP, NULL,
+			"ath10k tx: data: ",
+			nbuf->data, nbuf->len);
+
+	ath10k_ce_sendlist_buf_add(&sendlist, skb_cb->paddr, len, flags);
+
+	/* Make sure we have resources to handle this request */
+	spin_lock_bh(&pipe_info->pipe_lock);
+	if (!pipe_info->num_sends_allowed) {
+		ath10k_warn("Pipe: %d is full\n", pipe_id);
+		spin_unlock_bh(&pipe_info->pipe_lock);
+		return -ENOSR;
+	}
+	pipe_info->num_sends_allowed--;
+	spin_unlock_bh(&pipe_info->pipe_lock);
+
+	ret = ath10k_ce_sendlist_send(ce_hdl, nbuf, &sendlist, transfer_id);
+	if (ret)
+		ath10k_warn("CE send failed: %p\n", nbuf);
+
+	return ret;
+}
+
+static u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct hif_ce_pipe_info *pipe_info = &(ar_pci->pipe_info[pipe]);
+	int ret;
+
+	spin_lock_bh(&pipe_info->pipe_lock);
+	ret = pipe_info->num_sends_allowed;
+	spin_unlock_bh(&pipe_info->pipe_lock);
+
+	return ret;
+}
+
+static void ath10k_pci_hif_dump_area(struct ath10k *ar)
+{
+	u32 reg_dump_area = 0;
+	u32 reg_dump_values[REG_DUMP_COUNT_QCA988X] = {};
+	u32 host_addr;
+	int ret;
+	u32 i;
+
+	ath10k_err("firmware crashed!\n");
+	ath10k_err("hardware name %s version 0x%x\n",
+		   ar->hw_params.name, ar->target_version);
+	ath10k_err("firmware version: %u.%u.%u.%u\n", ar->fw_version_major,
+		   ar->fw_version_minor, ar->fw_version_release,
+		   ar->fw_version_build);
+
+	host_addr = host_interest_item_address(HI_ITEM(hi_failure_state));
+	if (ath10k_pci_diag_read_mem(ar, host_addr,
+				     &reg_dump_area, sizeof(u32)) != 0) {
+		ath10k_warn("could not read hi_failure_state\n");
+		return;
+	}
+
+	ath10k_err("target register Dump Location: 0x%08X\n", reg_dump_area);
+
+	ret = ath10k_pci_diag_read_mem(ar, reg_dump_area,
+				       &reg_dump_values[0],
+				       REG_DUMP_COUNT_QCA988X * sizeof(u32));
+	if (ret != 0) {
+		ath10k_err("could not dump FW Dump Area\n");
+		return;
+	}
+
+	BUILD_BUG_ON(REG_DUMP_COUNT_QCA988X % 4);
+
+	ath10k_err("target Register Dump\n");
+	for (i = 0; i < REG_DUMP_COUNT_QCA988X; i += 4)
+		ath10k_err("[%02d]: 0x%08X 0x%08X 0x%08X 0x%08X\n",
+			   i,
+			   reg_dump_values[i],
+			   reg_dump_values[i + 1],
+			   reg_dump_values[i + 2],
+			   reg_dump_values[i + 3]);
+}
+
+static void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe,
+					       int force)
+{
+	if (!force) {
+		int resources;
+		/*
+		 * Decide whether to actually poll for completions, or just
+		 * wait for a later chance.
+		 * If there seem to be plenty of resources left, then just wait
+		 * since checking involves reading a CE register, which is a
+		 * relatively expensive operation.
+		 */
+		resources = ath10k_pci_hif_get_free_queue_number(ar, pipe);
+
+		/*
+		 * If at least 50% of the total resources are still available,
+		 * don't bother checking again yet.
+		 */
+		if (resources > (host_ce_config_wlan[pipe].src_nentries >> 1))
+			return;
+	}
+	ath10k_ce_per_engine_service(ar, pipe);
+}
+
+static void ath10k_pci_hif_post_init(struct ath10k *ar,
+				     struct ath10k_hif_cb *callbacks)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+
+	memcpy(&ar_pci->msg_callbacks_current, callbacks,
+	       sizeof(ar_pci->msg_callbacks_current));
+}
+
+static int ath10k_pci_start_ce(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct ce_state *ce_diag = ar_pci->ce_diag;
+	const struct ce_attr *attr;
+	struct hif_ce_pipe_info *pipe_info;
+	struct ath10k_pci_compl *compl;
+	int i, pipe_num, completions, disable_interrupts;
+
+	spin_lock_init(&ar_pci->compl_lock);
+	INIT_LIST_HEAD(&ar_pci->compl_process);
+
+	for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) {
+		pipe_info = &ar_pci->pipe_info[pipe_num];
+
+		spin_lock_init(&pipe_info->pipe_lock);
+		INIT_LIST_HEAD(&pipe_info->compl_free);
+
+		/* Handle Diagnostic CE specially */
+		if (pipe_info->ce_hdl == ce_diag)
+			continue;
+
+		attr = &host_ce_config_wlan[pipe_num];
+		completions = 0;
+
+		if (attr->src_nentries) {
+			disable_interrupts = attr->flags & CE_ATTR_DIS_INTR;
+			ath10k_ce_send_cb_register(pipe_info->ce_hdl,
+						   ath10k_pci_ce_send_done,
+						   disable_interrupts);
+			completions += attr->src_nentries;
+			pipe_info->num_sends_allowed = attr->src_nentries - 1;
+		}
+
+		if (attr->dest_nentries) {
+			ath10k_ce_recv_cb_register(pipe_info->ce_hdl,
+						   ath10k_pci_ce_recv_data);
+			completions += attr->dest_nentries;
+		}
+
+		if (completions == 0)
+			continue;
+
+		for (i = 0; i < completions; i++) {
+			compl = kmalloc(sizeof(struct ath10k_pci_compl),
+					GFP_KERNEL);
+			if (!compl) {
+				ath10k_warn("No memory for completion state\n");
+				ath10k_pci_stop_ce(ar);
+				return -ENOMEM;
+			}
+
+			compl->send_or_recv = HIF_CE_COMPLETE_FREE;
+			list_add_tail(&compl->list, &pipe_info->compl_free);
+		}
+	}
+
+	return 0;
+}
+
+static void ath10k_pci_stop_ce(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct ath10k_pci_compl *compl;
+	struct sk_buff *skb;
+	int i;
+
+	ath10k_ce_disable_interrupts(ar);
+
+	/* Cancel the pending tasklet */
+	tasklet_kill(&ar_pci->intr_tq);
+
+	for (i = 0; i < CE_COUNT; i++)
+		tasklet_kill(&ar_pci->pipe_info[i].intr);
+
+	/* Mark pending completions as aborted, so that upper layers free up
+	 * their associated resources */
+	spin_lock_bh(&ar_pci->compl_lock);
+	list_for_each_entry(compl, &ar_pci->compl_process, list) {
+		skb = (struct sk_buff *)compl->transfer_context;
+		ATH10K_SKB_CB(skb)->is_aborted = true;
+	}
+	spin_unlock_bh(&ar_pci->compl_lock);
+}
+
+static void ath10k_pci_cleanup_ce(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct ath10k_pci_compl *compl, *tmp;
+	struct hif_ce_pipe_info *pipe_info;
+	struct sk_buff *netbuf;
+	int pipe_num;
+
+	/* Free pending completions. */
+	spin_lock_bh(&ar_pci->compl_lock);
+	if (!list_empty(&ar_pci->compl_process))
+		ath10k_warn("pending completions still present! possible memory leaks.\n");
+
+	list_for_each_entry_safe(compl, tmp, &ar_pci->compl_process, list) {
+		list_del(&compl->list);
+		netbuf = (struct sk_buff *)compl->transfer_context;
+		dev_kfree_skb_any(netbuf);
+		kfree(compl);
+	}
+	spin_unlock_bh(&ar_pci->compl_lock);
+
+	/* Free unused completions for each pipe. */
+	for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) {
+		pipe_info = &ar_pci->pipe_info[pipe_num];
+
+		spin_lock_bh(&pipe_info->pipe_lock);
+		list_for_each_entry_safe(compl, tmp,
+					 &pipe_info->compl_free, list) {
+			list_del(&compl->list);
+			kfree(compl);
+		}
+		spin_unlock_bh(&pipe_info->pipe_lock);
+	}
+}
+
+static void ath10k_pci_process_ce(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ar->hif.priv;
+	struct ath10k_hif_cb *cb = &ar_pci->msg_callbacks_current;
+	struct ath10k_pci_compl *compl;
+	struct sk_buff *skb;
+	unsigned int nbytes;
+	int ret, send_done = 0;
+
+	/* Upper layers aren't ready to handle tx/rx completions in parallel so
+	 * we must serialize all completion processing. */
+
+	spin_lock_bh(&ar_pci->compl_lock);
+	if (ar_pci->compl_processing) {
+		spin_unlock_bh(&ar_pci->compl_lock);
+		return;
+	}
+	ar_pci->compl_processing = true;
+	spin_unlock_bh(&ar_pci->compl_lock);
+
+	for (;;) {
+		spin_lock_bh(&ar_pci->compl_lock);
+		if (list_empty(&ar_pci->compl_process)) {
+			spin_unlock_bh(&ar_pci->compl_lock);
+			break;
+		}
+		compl = list_first_entry(&ar_pci->compl_process,
+					 struct ath10k_pci_compl, list);
+		list_del(&compl->list);
+		spin_unlock_bh(&ar_pci->compl_lock);
+
+		if (compl->send_or_recv == HIF_CE_COMPLETE_SEND) {
+			cb->tx_completion(ar,
+					  compl->transfer_context,
+					  compl->transfer_id);
+			send_done = 1;
+		} else {
+			ret = ath10k_pci_post_rx_pipe(compl->pipe_info, 1);
+			if (ret) {
+				ath10k_warn("Unable to post recv buffer for pipe: %d\n",
+					    compl->pipe_info->pipe_num);
+				break;
+			}
+
+			skb = (struct sk_buff *)compl->transfer_context;
+			nbytes = compl->nbytes;
+
+			ath10k_dbg(ATH10K_DBG_PCI,
+				   "ath10k_pci_ce_recv_data netbuf=%p  nbytes=%d\n",
+				   skb, nbytes);
+			ath10k_dbg_dump(ATH10K_DBG_PCI_DUMP, NULL,
+					"ath10k rx: ", skb->data, nbytes);
+
+			if (skb->len + skb_tailroom(skb) >= nbytes) {
+				skb_trim(skb, 0);
+				skb_put(skb, nbytes);
+				cb->rx_completion(ar, skb,
+						  compl->pipe_info->pipe_num);
+			} else {
+				ath10k_warn("rxed more than expected (nbytes %d, max %d)",
+					    nbytes,
+					    skb->len + skb_tailroom(skb));
+			}
+		}
+
+		compl->send_or_recv = HIF_CE_COMPLETE_FREE;
+
+		/*
+		 * Add completion back to the pipe's free list.
+		 */
+		spin_lock_bh(&compl->pipe_info->pipe_lock);
+		list_add_tail(&compl->list, &compl->pipe_info->compl_free);
+		compl->pipe_info->num_sends_allowed += send_done;
+		spin_unlock_bh(&compl->pipe_info->pipe_lock);
+	}
+
+	spin_lock_bh(&ar_pci->compl_lock);
+	ar_pci->compl_processing = false;
+	spin_unlock_bh(&ar_pci->compl_lock);
+}
+
+/* TODO - temporary mapping while we have too few CE's */
+static int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar,
+					      u16 service_id, u8 *ul_pipe,
+					      u8 *dl_pipe, int *ul_is_polled,
+					      int *dl_is_polled)
+{
+	int ret = 0;
+
+	/* polling for received messages not supported */
+	*dl_is_polled = 0;
+
+	switch (service_id) {
+	case ATH10K_HTC_SVC_ID_HTT_DATA_MSG:
+		/*
+		 * Host->target HTT gets its own pipe, so it can be polled
+		 * while other pipes are interrupt driven.
+		 */
+		*ul_pipe = 4;
+		/*
+		 * Use the same target->host pipe for HTC ctrl, HTC raw
+		 * streams, and HTT.
+		 */
+		*dl_pipe = 1;
+		break;
+
+	case ATH10K_HTC_SVC_ID_RSVD_CTRL:
+	case ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS:
+		/*
+		 * Note: HTC_RAW_STREAMS_SVC is currently unused, and
+		 * HTC_CTRL_RSVD_SVC could share the same pipe as the
+		 * WMI services.  So, if another CE is needed, change
+		 * this to *ul_pipe = 3, which frees up CE 0.
+		 */
+		/* *ul_pipe = 3; */
+		*ul_pipe = 0;
+		*dl_pipe = 1;
+		break;
+
+	case ATH10K_HTC_SVC_ID_WMI_DATA_BK:
+	case ATH10K_HTC_SVC_ID_WMI_DATA_BE:
+	case ATH10K_HTC_SVC_ID_WMI_DATA_VI:
+	case ATH10K_HTC_SVC_ID_WMI_DATA_VO:
+
+	case ATH10K_HTC_SVC_ID_WMI_CONTROL:
+		*ul_pipe = 3;
+		*dl_pipe = 2;
+		break;
+
+		/* pipe 5 unused   */
+		/* pipe 6 reserved */
+		/* pipe 7 reserved */
+
+	default:
+		ret = -1;
+		break;
+	}
+	*ul_is_polled =
+		(host_ce_config_wlan[*ul_pipe].flags & CE_ATTR_DIS_INTR) != 0;
+
+	return ret;
+}
+
+static void ath10k_pci_hif_get_default_pipe(struct ath10k *ar,
+						u8 *ul_pipe, u8 *dl_pipe)
+{
+	int ul_is_polled, dl_is_polled;
+
+	(void)ath10k_pci_hif_map_service_to_pipe(ar,
+						 ATH10K_HTC_SVC_ID_RSVD_CTRL,
+						 ul_pipe,
+						 dl_pipe,
+						 &ul_is_polled,
+						 &dl_is_polled);
+}
+
+static int ath10k_pci_post_rx_pipe(struct hif_ce_pipe_info *pipe_info,
+				   int num)
+{
+	struct ath10k *ar = pipe_info->hif_ce_state;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct ce_state *ce_state = pipe_info->ce_hdl;
+	struct sk_buff *skb;
+	dma_addr_t ce_data;
+	int i, ret = 0;
+
+	if (pipe_info->buf_sz == 0)
+		return 0;
+
+	for (i = 0; i < num; i++) {
+		skb = dev_alloc_skb(pipe_info->buf_sz);
+		if (!skb) {
+			ath10k_warn("could not allocate skbuff for pipe %d\n",
+				    num);
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		WARN_ONCE((unsigned long)skb->data & 3, "unaligned skb");
+
+		ce_data = dma_map_single(ar->dev, skb->data,
+					 skb->len + skb_tailroom(skb),
+					 DMA_FROM_DEVICE);
+
+		if (unlikely(dma_mapping_error(ar->dev, ce_data))) {
+			ath10k_warn("could not dma map skbuff\n");
+			dev_kfree_skb_any(skb);
+			ret = -EIO;
+			goto err;
+		}
+
+		ATH10K_SKB_CB(skb)->paddr = ce_data;
+
+		pci_dma_sync_single_for_device(ar_pci->pdev, ce_data,
+					       pipe_info->buf_sz,
+					       PCI_DMA_FROMDEVICE);
+
+		ret = ath10k_ce_recv_buf_enqueue(ce_state, (void *)skb,
+						 ce_data);
+		if (ret) {
+			ath10k_warn("could not enqueue to pipe %d (%d)\n",
+				    num, ret);
+			goto err;
+		}
+	}
+
+	return ret;
+
+err:
+	ath10k_pci_rx_pipe_cleanup(pipe_info);
+	return ret;
+}
+
+static int ath10k_pci_post_rx(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct hif_ce_pipe_info *pipe_info;
+	const struct ce_attr *attr;
+	int pipe_num, ret = 0;
+
+	for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) {
+		pipe_info = &ar_pci->pipe_info[pipe_num];
+		attr = &host_ce_config_wlan[pipe_num];
+
+		if (attr->dest_nentries == 0)
+			continue;
+
+		ret = ath10k_pci_post_rx_pipe(pipe_info,
+					      attr->dest_nentries - 1);
+		if (ret) {
+			ath10k_warn("Unable to replenish recv buffers for pipe: %d\n",
+				    pipe_num);
+
+			for (; pipe_num >= 0; pipe_num--) {
+				pipe_info = &ar_pci->pipe_info[pipe_num];
+				ath10k_pci_rx_pipe_cleanup(pipe_info);
+			}
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int ath10k_pci_hif_start(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ret;
+
+	ret = ath10k_pci_start_ce(ar);
+	if (ret) {
+		ath10k_warn("could not start CE (%d)\n", ret);
+		return ret;
+	}
+
+	/* Post buffers once to start things off. */
+	ret = ath10k_pci_post_rx(ar);
+	if (ret) {
+		ath10k_warn("could not post rx pipes (%d)\n", ret);
+		return ret;
+	}
+
+	ar_pci->started = 1;
+	return 0;
+}
+
+static void ath10k_pci_rx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info)
+{
+	struct ath10k *ar;
+	struct ath10k_pci *ar_pci;
+	struct ce_state *ce_hdl;
+	u32 buf_sz;
+	struct sk_buff *netbuf;
+	u32 ce_data;
+
+	buf_sz = pipe_info->buf_sz;
+
+	/* Unused Copy Engine */
+	if (buf_sz == 0)
+		return;
+
+	ar = pipe_info->hif_ce_state;
+	ar_pci = ath10k_pci_priv(ar);
+
+	if (!ar_pci->started)
+		return;
+
+	ce_hdl = pipe_info->ce_hdl;
+
+	while (ath10k_ce_revoke_recv_next(ce_hdl, (void **)&netbuf,
+					  &ce_data) == 0) {
+		dma_unmap_single(ar->dev, ATH10K_SKB_CB(netbuf)->paddr,
+				 netbuf->len + skb_tailroom(netbuf),
+				 DMA_FROM_DEVICE);
+		dev_kfree_skb_any(netbuf);
+	}
+}
+
+static void ath10k_pci_tx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info)
+{
+	struct ath10k *ar;
+	struct ath10k_pci *ar_pci;
+	struct ce_state *ce_hdl;
+	struct sk_buff *netbuf;
+	u32 ce_data;
+	unsigned int nbytes;
+	unsigned int id;
+	u32 buf_sz;
+
+	buf_sz = pipe_info->buf_sz;
+
+	/* Unused Copy Engine */
+	if (buf_sz == 0)
+		return;
+
+	ar = pipe_info->hif_ce_state;
+	ar_pci = ath10k_pci_priv(ar);
+
+	if (!ar_pci->started)
+		return;
+
+	ce_hdl = pipe_info->ce_hdl;
+
+	while (ath10k_ce_cancel_send_next(ce_hdl, (void **)&netbuf,
+					  &ce_data, &nbytes, &id) == 0) {
+		if (netbuf != CE_SENDLIST_ITEM_CTXT)
+			/*
+			 * Indicate the completion to higer layer to free
+			 * the buffer
+			 */
+			ATH10K_SKB_CB(netbuf)->is_aborted = true;
+			ar_pci->msg_callbacks_current.tx_completion(ar,
+								    netbuf,
+								    id);
+	}
+}
+
+/*
+ * Cleanup residual buffers for device shutdown:
+ *    buffers that were enqueued for receive
+ *    buffers that were to be sent
+ * Note: Buffers that had completed but which were
+ * not yet processed are on a completion queue. They
+ * are handled when the completion thread shuts down.
+ */
+static void ath10k_pci_buffer_cleanup(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int pipe_num;
+
+	for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) {
+		struct hif_ce_pipe_info *pipe_info;
+
+		pipe_info = &ar_pci->pipe_info[pipe_num];
+		ath10k_pci_rx_pipe_cleanup(pipe_info);
+		ath10k_pci_tx_pipe_cleanup(pipe_info);
+	}
+}
+
+static void ath10k_pci_ce_deinit(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct hif_ce_pipe_info *pipe_info;
+	int pipe_num;
+
+	for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) {
+		pipe_info = &ar_pci->pipe_info[pipe_num];
+		if (pipe_info->ce_hdl) {
+			ath10k_ce_deinit(pipe_info->ce_hdl);
+			pipe_info->ce_hdl = NULL;
+			pipe_info->buf_sz = 0;
+		}
+	}
+}
+
+static void ath10k_pci_hif_stop(struct ath10k *ar)
+{
+	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+
+	ath10k_pci_stop_ce(ar);
+
+	/* At this point, asynchronous threads are stopped, the target should
+	 * not DMA nor interrupt. We process the leftovers and then free
+	 * everything else up. */
+
+	ath10k_pci_process_ce(ar);
+	ath10k_pci_cleanup_ce(ar);
+	ath10k_pci_buffer_cleanup(ar);
+	ath10k_pci_ce_deinit(ar);
+}
+
+static int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar,
+					   void *req, u32 req_len,
+					   void *resp, u32 *resp_len)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct ce_state *ce_tx = ar_pci->pipe_info[BMI_CE_NUM_TO_TARG].ce_hdl;
+	struct ce_state *ce_rx = ar_pci->pipe_info[BMI_CE_NUM_TO_HOST].ce_hdl;
+	dma_addr_t req_paddr = 0;
+	dma_addr_t resp_paddr = 0;
+	struct bmi_xfer xfer = {};
+	void *treq, *tresp = NULL;
+	int ret = 0;
+
+	if (resp && !resp_len)
+		return -EINVAL;
+
+	if (resp && resp_len && *resp_len == 0)
+		return -EINVAL;
+
+	treq = kmemdup(req, req_len, GFP_KERNEL);
+	if (!treq)
+		return -ENOMEM;
+
+	req_paddr = dma_map_single(ar->dev, treq, req_len, DMA_TO_DEVICE);
+	ret = dma_mapping_error(ar->dev, req_paddr);
+	if (ret)
+		goto err_dma;
+
+	if (resp && resp_len) {
+		tresp = kzalloc(*resp_len, GFP_KERNEL);
+		if (!tresp) {
+			ret = -ENOMEM;
+			goto err_req;
+		}
+
+		resp_paddr = dma_map_single(ar->dev, tresp, *resp_len,
+					    DMA_FROM_DEVICE);
+		ret = dma_mapping_error(ar->dev, resp_paddr);
+		if (ret)
+			goto err_req;
+
+		xfer.wait_for_resp = true;
+		xfer.resp_len = 0;
+
+		ath10k_ce_recv_buf_enqueue(ce_rx, &xfer, resp_paddr);
+	}
+
+	init_completion(&xfer.done);
+
+	ret = ath10k_ce_send(ce_tx, &xfer, req_paddr, req_len, -1, 0);
+	if (ret)
+		goto err_resp;
+
+	ret = wait_for_completion_timeout(&xfer.done,
+					  BMI_COMMUNICATION_TIMEOUT_HZ);
+	if (ret <= 0) {
+		u32 unused_buffer;
+		unsigned int unused_nbytes;
+		unsigned int unused_id;
+
+		ret = -ETIMEDOUT;
+		ath10k_ce_cancel_send_next(ce_tx, NULL, &unused_buffer,
+					   &unused_nbytes, &unused_id);
+	} else {
+		/* non-zero means we did not time out */
+		ret = 0;
+	}
+
+err_resp:
+	if (resp) {
+		u32 unused_buffer;
+
+		ath10k_ce_revoke_recv_next(ce_rx, NULL, &unused_buffer);
+		dma_unmap_single(ar->dev, resp_paddr,
+				 *resp_len, DMA_FROM_DEVICE);
+	}
+err_req:
+	dma_unmap_single(ar->dev, req_paddr, req_len, DMA_TO_DEVICE);
+
+	if (ret == 0 && resp_len) {
+		*resp_len = min(*resp_len, xfer.resp_len);
+		memcpy(resp, tresp, xfer.resp_len);
+	}
+err_dma:
+	kfree(treq);
+	kfree(tresp);
+
+	return ret;
+}
+
+static void ath10k_pci_bmi_send_done(struct ce_state *ce_state,
+				     void *transfer_context,
+				     u32 data,
+				     unsigned int nbytes,
+				     unsigned int transfer_id)
+{
+	struct bmi_xfer *xfer = transfer_context;
+
+	if (xfer->wait_for_resp)
+		return;
+
+	complete(&xfer->done);
+}
+
+static void ath10k_pci_bmi_recv_data(struct ce_state *ce_state,
+				     void *transfer_context,
+				     u32 data,
+				     unsigned int nbytes,
+				     unsigned int transfer_id,
+				     unsigned int flags)
+{
+	struct bmi_xfer *xfer = transfer_context;
+
+	if (!xfer->wait_for_resp) {
+		ath10k_warn("unexpected: BMI data received; ignoring\n");
+		return;
+	}
+
+	xfer->resp_len = nbytes;
+	complete(&xfer->done);
+}
+
+/*
+ * Map from service/endpoint to Copy Engine.
+ * This table is derived from the CE_PCI TABLE, above.
+ * It is passed to the Target at startup for use by firmware.
+ */
+static const struct service_to_pipe target_service_to_ce_map_wlan[] = {
+	{
+		 ATH10K_HTC_SVC_ID_WMI_DATA_VO,
+		 PIPEDIR_OUT,		/* out = UL = host -> target */
+		 3,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_WMI_DATA_VO,
+		 PIPEDIR_IN,		/* in = DL = target -> host */
+		 2,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_WMI_DATA_BK,
+		 PIPEDIR_OUT,		/* out = UL = host -> target */
+		 3,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_WMI_DATA_BK,
+		 PIPEDIR_IN,		/* in = DL = target -> host */
+		 2,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_WMI_DATA_BE,
+		 PIPEDIR_OUT,		/* out = UL = host -> target */
+		 3,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_WMI_DATA_BE,
+		 PIPEDIR_IN,		/* in = DL = target -> host */
+		 2,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_WMI_DATA_VI,
+		 PIPEDIR_OUT,		/* out = UL = host -> target */
+		 3,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_WMI_DATA_VI,
+		 PIPEDIR_IN,		/* in = DL = target -> host */
+		 2,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_WMI_CONTROL,
+		 PIPEDIR_OUT,		/* out = UL = host -> target */
+		 3,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_WMI_CONTROL,
+		 PIPEDIR_IN,		/* in = DL = target -> host */
+		 2,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_RSVD_CTRL,
+		 PIPEDIR_OUT,		/* out = UL = host -> target */
+		 0,		/* could be moved to 3 (share with WMI) */
+	},
+	{
+		 ATH10K_HTC_SVC_ID_RSVD_CTRL,
+		 PIPEDIR_IN,		/* in = DL = target -> host */
+		 1,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS,	/* not currently used */
+		 PIPEDIR_OUT,		/* out = UL = host -> target */
+		 0,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS,	/* not currently used */
+		 PIPEDIR_IN,		/* in = DL = target -> host */
+		 1,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_HTT_DATA_MSG,
+		 PIPEDIR_OUT,		/* out = UL = host -> target */
+		 4,
+	},
+	{
+		 ATH10K_HTC_SVC_ID_HTT_DATA_MSG,
+		 PIPEDIR_IN,		/* in = DL = target -> host */
+		 1,
+	},
+
+	/* (Additions here) */
+
+	{				/* Must be last */
+		 0,
+		 0,
+		 0,
+	},
+};
+
+/*
+ * Send an interrupt to the device to wake up the Target CPU
+ * so it has an opportunity to notice any changed state.
+ */
+static int ath10k_pci_wake_target_cpu(struct ath10k *ar)
+{
+	int ret;
+	u32 core_ctrl;
+
+	ret = ath10k_pci_diag_read_access(ar, SOC_CORE_BASE_ADDRESS |
+					      CORE_CTRL_ADDRESS,
+					  &core_ctrl);
+	if (ret) {
+		ath10k_warn("Unable to read core ctrl\n");
+		return ret;
+	}
+
+	/* A_INUM_FIRMWARE interrupt to Target CPU */
+	core_ctrl |= CORE_CTRL_CPU_INTR_MASK;
+
+	ret = ath10k_pci_diag_write_access(ar, SOC_CORE_BASE_ADDRESS |
+					       CORE_CTRL_ADDRESS,
+					   core_ctrl);
+	if (ret)
+		ath10k_warn("Unable to set interrupt mask\n");
+
+	return ret;
+}
+
+static int ath10k_pci_init_config(struct ath10k *ar)
+{
+	u32 interconnect_targ_addr;
+	u32 pcie_state_targ_addr = 0;
+	u32 pipe_cfg_targ_addr = 0;
+	u32 svc_to_pipe_map = 0;
+	u32 pcie_config_flags = 0;
+	u32 ealloc_value;
+	u32 ealloc_targ_addr;
+	u32 flag2_value;
+	u32 flag2_targ_addr;
+	int ret = 0;
+
+	/* Download to Target the CE Config and the service-to-CE map */
+	interconnect_targ_addr =
+		host_interest_item_address(HI_ITEM(hi_interconnect_state));
+
+	/* Supply Target-side CE configuration */
+	ret = ath10k_pci_diag_read_access(ar, interconnect_targ_addr,
+					  &pcie_state_targ_addr);
+	if (ret != 0) {
+		ath10k_err("Failed to get pcie state addr: %d\n", ret);
+		return ret;
+	}
+
+	if (pcie_state_targ_addr == 0) {
+		ret = -EIO;
+		ath10k_err("Invalid pcie state addr\n");
+		return ret;
+	}
+
+	ret = ath10k_pci_diag_read_access(ar, pcie_state_targ_addr +
+					  offsetof(struct pcie_state,
+						   pipe_cfg_addr),
+					  &pipe_cfg_targ_addr);
+	if (ret != 0) {
+		ath10k_err("Failed to get pipe cfg addr: %d\n", ret);
+		return ret;
+	}
+
+	if (pipe_cfg_targ_addr == 0) {
+		ret = -EIO;
+		ath10k_err("Invalid pipe cfg addr\n");
+		return ret;
+	}
+
+	ret = ath10k_pci_diag_write_mem(ar, pipe_cfg_targ_addr,
+				 target_ce_config_wlan,
+				 sizeof(target_ce_config_wlan));
+
+	if (ret != 0) {
+		ath10k_err("Failed to write pipe cfg: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_pci_diag_read_access(ar, pcie_state_targ_addr +
+					  offsetof(struct pcie_state,
+						   svc_to_pipe_map),
+					  &svc_to_pipe_map);
+	if (ret != 0) {
+		ath10k_err("Failed to get svc/pipe map: %d\n", ret);
+		return ret;
+	}
+
+	if (svc_to_pipe_map == 0) {
+		ret = -EIO;
+		ath10k_err("Invalid svc_to_pipe map\n");
+		return ret;
+	}
+
+	ret = ath10k_pci_diag_write_mem(ar, svc_to_pipe_map,
+				 target_service_to_ce_map_wlan,
+				 sizeof(target_service_to_ce_map_wlan));
+	if (ret != 0) {
+		ath10k_err("Failed to write svc/pipe map: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_pci_diag_read_access(ar, pcie_state_targ_addr +
+					  offsetof(struct pcie_state,
+						   config_flags),
+					  &pcie_config_flags);
+	if (ret != 0) {
+		ath10k_err("Failed to get pcie config_flags: %d\n", ret);
+		return ret;
+	}
+
+	pcie_config_flags &= ~PCIE_CONFIG_FLAG_ENABLE_L1;
+
+	ret = ath10k_pci_diag_write_mem(ar, pcie_state_targ_addr +
+				 offsetof(struct pcie_state, config_flags),
+				 &pcie_config_flags,
+				 sizeof(pcie_config_flags));
+	if (ret != 0) {
+		ath10k_err("Failed to write pcie config_flags: %d\n", ret);
+		return ret;
+	}
+
+	/* configure early allocation */
+	ealloc_targ_addr = host_interest_item_address(HI_ITEM(hi_early_alloc));
+
+	ret = ath10k_pci_diag_read_access(ar, ealloc_targ_addr, &ealloc_value);
+	if (ret != 0) {
+		ath10k_err("Faile to get early alloc val: %d\n", ret);
+		return ret;
+	}
+
+	/* first bank is switched to IRAM */
+	ealloc_value |= ((HI_EARLY_ALLOC_MAGIC << HI_EARLY_ALLOC_MAGIC_SHIFT) &
+			 HI_EARLY_ALLOC_MAGIC_MASK);
+	ealloc_value |= ((1 << HI_EARLY_ALLOC_IRAM_BANKS_SHIFT) &
+			 HI_EARLY_ALLOC_IRAM_BANKS_MASK);
+
+	ret = ath10k_pci_diag_write_access(ar, ealloc_targ_addr, ealloc_value);
+	if (ret != 0) {
+		ath10k_err("Failed to set early alloc val: %d\n", ret);
+		return ret;
+	}
+
+	/* Tell Target to proceed with initialization */
+	flag2_targ_addr = host_interest_item_address(HI_ITEM(hi_option_flag2));
+
+	ret = ath10k_pci_diag_read_access(ar, flag2_targ_addr, &flag2_value);
+	if (ret != 0) {
+		ath10k_err("Failed to get option val: %d\n", ret);
+		return ret;
+	}
+
+	flag2_value |= HI_OPTION_EARLY_CFG_DONE;
+
+	ret = ath10k_pci_diag_write_access(ar, flag2_targ_addr, flag2_value);
+	if (ret != 0) {
+		ath10k_err("Failed to set option val: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+
+
+static int ath10k_pci_ce_init(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	struct hif_ce_pipe_info *pipe_info;
+	const struct ce_attr *attr;
+	int pipe_num;
+
+	for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) {
+		pipe_info = &ar_pci->pipe_info[pipe_num];
+		pipe_info->pipe_num = pipe_num;
+		pipe_info->hif_ce_state = ar;
+		attr = &host_ce_config_wlan[pipe_num];
+
+		pipe_info->ce_hdl = ath10k_ce_init(ar, pipe_num, attr);
+		if (pipe_info->ce_hdl == NULL) {
+			ath10k_err("Unable to initialize CE for pipe: %d\n",
+				   pipe_num);
+
+			/* It is safe to call it here. It checks if ce_hdl is
+			 * valid for each pipe */
+			ath10k_pci_ce_deinit(ar);
+			return -1;
+		}
+
+		if (pipe_num == ar_pci->ce_count - 1) {
+			/*
+			 * Reserve the ultimate CE for
+			 * diagnostic Window support
+			 */
+			ar_pci->ce_diag =
+			ar_pci->pipe_info[ar_pci->ce_count - 1].ce_hdl;
+			continue;
+		}
+
+		pipe_info->buf_sz = (size_t) (attr->src_sz_max);
+	}
+
+	/*
+	 * Initially, establish CE completion handlers for use with BMI.
+	 * These are overwritten with generic handlers after we exit BMI phase.
+	 */
+	pipe_info = &ar_pci->pipe_info[BMI_CE_NUM_TO_TARG];
+	ath10k_ce_send_cb_register(pipe_info->ce_hdl,
+				   ath10k_pci_bmi_send_done, 0);
+
+	pipe_info = &ar_pci->pipe_info[BMI_CE_NUM_TO_HOST];
+	ath10k_ce_recv_cb_register(pipe_info->ce_hdl,
+				   ath10k_pci_bmi_recv_data);
+
+	return 0;
+}
+
+static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	u32 fw_indicator_address, fw_indicator;
+
+	ath10k_pci_wake(ar);
+
+	fw_indicator_address = ar_pci->fw_indicator_address;
+	fw_indicator = ath10k_pci_read32(ar, fw_indicator_address);
+
+	if (fw_indicator & FW_IND_EVENT_PENDING) {
+		/* ACK: clear Target-side pending event */
+		ath10k_pci_write32(ar, fw_indicator_address,
+				   fw_indicator & ~FW_IND_EVENT_PENDING);
+
+		if (ar_pci->started) {
+			ath10k_pci_hif_dump_area(ar);
+		} else {
+			/*
+			 * Probable Target failure before we're prepared
+			 * to handle it.  Generally unexpected.
+			 */
+			ath10k_warn("early firmware event indicated\n");
+		}
+	}
+
+	ath10k_pci_sleep(ar);
+}
+
+static const struct ath10k_hif_ops ath10k_pci_hif_ops = {
+	.send_head		= ath10k_pci_hif_send_head,
+	.exchange_bmi_msg	= ath10k_pci_hif_exchange_bmi_msg,
+	.start			= ath10k_pci_hif_start,
+	.stop			= ath10k_pci_hif_stop,
+	.map_service_to_pipe	= ath10k_pci_hif_map_service_to_pipe,
+	.get_default_pipe	= ath10k_pci_hif_get_default_pipe,
+	.send_complete_check	= ath10k_pci_hif_send_complete_check,
+	.init			= ath10k_pci_hif_post_init,
+	.get_free_queue_number	= ath10k_pci_hif_get_free_queue_number,
+};
+
+static void ath10k_pci_ce_tasklet(unsigned long ptr)
+{
+	struct hif_ce_pipe_info *pipe = (struct hif_ce_pipe_info *)ptr;
+	struct ath10k_pci *ar_pci = pipe->ar_pci;
+
+	ath10k_ce_per_engine_service(ar_pci->ar, pipe->pipe_num);
+}
+
+static void ath10k_msi_err_tasklet(unsigned long data)
+{
+	struct ath10k *ar = (struct ath10k *)data;
+
+	ath10k_pci_fw_interrupt_handler(ar);
+}
+
+/*
+ * Handler for a per-engine interrupt on a PARTICULAR CE.
+ * This is used in cases where each CE has a private MSI interrupt.
+ */
+static irqreturn_t ath10k_pci_per_engine_handler(int irq, void *arg)
+{
+	struct ath10k *ar = arg;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ce_id = irq - ar_pci->pdev->irq - MSI_ASSIGN_CE_INITIAL;
+
+	if (ce_id < 0 || ce_id > ARRAY_SIZE(ar_pci->pipe_info)) {
+		ath10k_warn("unexpected/invalid irq %d ce_id %d\n", irq, ce_id);
+		return IRQ_HANDLED;
+	}
+
+	/*
+	 * NOTE: We are able to derive ce_id from irq because we
+	 * use a one-to-one mapping for CE's 0..5.
+	 * CE's 6 & 7 do not use interrupts at all.
+	 *
+	 * This mapping must be kept in sync with the mapping
+	 * used by firmware.
+	 */
+	tasklet_schedule(&ar_pci->pipe_info[ce_id].intr);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ath10k_pci_msi_fw_handler(int irq, void *arg)
+{
+	struct ath10k *ar = arg;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	tasklet_schedule(&ar_pci->msi_fw_err);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Top-level interrupt handler for all PCI interrupts from a Target.
+ * When a block of MSI interrupts is allocated, this top-level handler
+ * is not used; instead, we directly call the correct sub-handler.
+ */
+static irqreturn_t ath10k_pci_interrupt_handler(int irq, void *arg)
+{
+	struct ath10k *ar = arg;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	if (ar_pci->num_msi_intrs == 0) {
+		/*
+		 * IMPORTANT: INTR_CLR regiser has to be set after
+		 * INTR_ENABLE is set to 0, otherwise interrupt can not be
+		 * really cleared.
+		 */
+		iowrite32(0, ar_pci->mem +
+			  (SOC_CORE_BASE_ADDRESS |
+			   PCIE_INTR_ENABLE_ADDRESS));
+		iowrite32(PCIE_INTR_FIRMWARE_MASK |
+			  PCIE_INTR_CE_MASK_ALL,
+			  ar_pci->mem + (SOC_CORE_BASE_ADDRESS |
+					 PCIE_INTR_CLR_ADDRESS));
+		/*
+		 * IMPORTANT: this extra read transaction is required to
+		 * flush the posted write buffer.
+		 */
+		(void) ioread32(ar_pci->mem +
+				(SOC_CORE_BASE_ADDRESS |
+				 PCIE_INTR_ENABLE_ADDRESS));
+	}
+
+	tasklet_schedule(&ar_pci->intr_tq);
+
+	return IRQ_HANDLED;
+}
+
+static void ath10k_pci_tasklet(unsigned long data)
+{
+	struct ath10k *ar = (struct ath10k *)data;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	ath10k_pci_fw_interrupt_handler(ar); /* FIXME: Handle FW error */
+	ath10k_ce_per_engine_service_any(ar);
+
+	if (ar_pci->num_msi_intrs == 0) {
+		/* Enable Legacy PCI line interrupts */
+		iowrite32(PCIE_INTR_FIRMWARE_MASK |
+			  PCIE_INTR_CE_MASK_ALL,
+			  ar_pci->mem + (SOC_CORE_BASE_ADDRESS |
+					 PCIE_INTR_ENABLE_ADDRESS));
+		/*
+		 * IMPORTANT: this extra read transaction is required to
+		 * flush the posted write buffer
+		 */
+		(void) ioread32(ar_pci->mem +
+				(SOC_CORE_BASE_ADDRESS |
+				 PCIE_INTR_ENABLE_ADDRESS));
+	}
+}
+
+static int ath10k_pci_start_intr_msix(struct ath10k *ar, int num)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ret;
+	int i;
+
+	ret = pci_enable_msi_block(ar_pci->pdev, num);
+	if (ret)
+		return ret;
+
+	ret = request_irq(ar_pci->pdev->irq + MSI_ASSIGN_FW,
+			  ath10k_pci_msi_fw_handler,
+			  IRQF_SHARED, "ath10k_pci", ar);
+	if (ret)
+		return ret;
+
+	for (i = MSI_ASSIGN_CE_INITIAL; i <= MSI_ASSIGN_CE_MAX; i++) {
+		ret = request_irq(ar_pci->pdev->irq + i,
+				  ath10k_pci_per_engine_handler,
+				  IRQF_SHARED, "ath10k_pci", ar);
+		if (ret) {
+			ath10k_warn("request_irq(%d) failed %d\n",
+				    ar_pci->pdev->irq + i, ret);
+
+			for (; i >= MSI_ASSIGN_CE_INITIAL; i--)
+				free_irq(ar_pci->pdev->irq, ar);
+
+			pci_disable_msi(ar_pci->pdev);
+			return ret;
+		}
+	}
+
+	ath10k_info("MSI-X interrupt handling (%d intrs)\n", num);
+	return 0;
+}
+
+static int ath10k_pci_start_intr_msi(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ret;
+
+	ret = pci_enable_msi(ar_pci->pdev);
+	if (ret < 0)
+		return ret;
+
+	ret = request_irq(ar_pci->pdev->irq,
+			  ath10k_pci_interrupt_handler,
+			  IRQF_SHARED, "ath10k_pci", ar);
+	if (ret < 0) {
+		pci_disable_msi(ar_pci->pdev);
+		return ret;
+	}
+
+	ath10k_info("MSI interrupt handling\n");
+	return 0;
+}
+
+static int ath10k_pci_start_intr_legacy(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ret;
+
+	ret = request_irq(ar_pci->pdev->irq,
+			  ath10k_pci_interrupt_handler,
+			  IRQF_SHARED, "ath10k_pci", ar);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Make sure to wake the Target before enabling Legacy
+	 * Interrupt.
+	 */
+	iowrite32(PCIE_SOC_WAKE_V_MASK,
+		  ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS +
+		  PCIE_SOC_WAKE_ADDRESS);
+
+	ath10k_pci_wait(ar);
+
+	/*
+	 * A potential race occurs here: The CORE_BASE write
+	 * depends on target correctly decoding AXI address but
+	 * host won't know when target writes BAR to CORE_CTRL.
+	 * This write might get lost if target has NOT written BAR.
+	 * For now, fix the race by repeating the write in below
+	 * synchronization checking.
+	 */
+	iowrite32(PCIE_INTR_FIRMWARE_MASK |
+		  PCIE_INTR_CE_MASK_ALL,
+		  ar_pci->mem + (SOC_CORE_BASE_ADDRESS |
+				 PCIE_INTR_ENABLE_ADDRESS));
+	iowrite32(PCIE_SOC_WAKE_RESET,
+		  ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS +
+		  PCIE_SOC_WAKE_ADDRESS);
+
+	ath10k_info("legacy interrupt handling\n");
+	return 0;
+}
+
+static int ath10k_pci_start_intr(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int num = MSI_NUM_REQUEST;
+	int ret;
+	int i;
+
+	tasklet_init(&ar_pci->intr_tq, ath10k_pci_tasklet, (unsigned long) ar);
+	tasklet_init(&ar_pci->msi_fw_err, ath10k_msi_err_tasklet,
+		     (unsigned long) ar);
+
+	for (i = 0; i < CE_COUNT; i++) {
+		ar_pci->pipe_info[i].ar_pci = ar_pci;
+		tasklet_init(&ar_pci->pipe_info[i].intr,
+			     ath10k_pci_ce_tasklet,
+			     (unsigned long)&ar_pci->pipe_info[i]);
+	}
+
+	if (!test_bit(ATH10K_PCI_FEATURE_MSI_X, ar_pci->features))
+		num = 1;
+
+	if (num > 1) {
+		ret = ath10k_pci_start_intr_msix(ar, num);
+		if (ret == 0)
+			goto exit;
+
+		ath10k_warn("MSI-X didn't succeed (%d), trying MSI\n", ret);
+		num = 1;
+	}
+
+	if (num == 1) {
+		ret = ath10k_pci_start_intr_msi(ar);
+		if (ret == 0)
+			goto exit;
+
+		ath10k_warn("MSI didn't succeed (%d), trying legacy INTR\n",
+			    ret);
+		num = 0;
+	}
+
+	ret = ath10k_pci_start_intr_legacy(ar);
+
+exit:
+	ar_pci->num_msi_intrs = num;
+	ar_pci->ce_count = CE_COUNT;
+	return ret;
+}
+
+static void ath10k_pci_stop_intr(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int i;
+
+	/* There's at least one interrupt irregardless whether its legacy INTR
+	 * or MSI or MSI-X */
+	for (i = 0; i < max(1, ar_pci->num_msi_intrs); i++)
+		free_irq(ar_pci->pdev->irq + i, ar);
+
+	if (ar_pci->num_msi_intrs > 0)
+		pci_disable_msi(ar_pci->pdev);
+}
+
+static int ath10k_pci_reset_target(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int wait_limit = 300; /* 3 sec */
+
+	/* Wait for Target to finish initialization before we proceed. */
+	iowrite32(PCIE_SOC_WAKE_V_MASK,
+		  ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS +
+		  PCIE_SOC_WAKE_ADDRESS);
+
+	ath10k_pci_wait(ar);
+
+	while (wait_limit-- &&
+	       !(ioread32(ar_pci->mem + FW_INDICATOR_ADDRESS) &
+		 FW_IND_INITIALIZED)) {
+		if (ar_pci->num_msi_intrs == 0)
+			/* Fix potential race by repeating CORE_BASE writes */
+			iowrite32(PCIE_INTR_FIRMWARE_MASK |
+				  PCIE_INTR_CE_MASK_ALL,
+				  ar_pci->mem + (SOC_CORE_BASE_ADDRESS |
+						 PCIE_INTR_ENABLE_ADDRESS));
+		mdelay(10);
+	}
+
+	if (wait_limit < 0) {
+		ath10k_err("Target stalled\n");
+		iowrite32(PCIE_SOC_WAKE_RESET,
+			  ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS +
+			  PCIE_SOC_WAKE_ADDRESS);
+		return -EIO;
+	}
+
+	iowrite32(PCIE_SOC_WAKE_RESET,
+		  ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS +
+		  PCIE_SOC_WAKE_ADDRESS);
+
+	return 0;
+}
+
+static void ath10k_pci_device_reset(struct ath10k_pci *ar_pci)
+{
+	struct ath10k *ar = ar_pci->ar;
+	void __iomem *mem = ar_pci->mem;
+	int i;
+	u32 val;
+
+	if (!SOC_GLOBAL_RESET_ADDRESS)
+		return;
+
+	if (!mem)
+		return;
+
+	ath10k_pci_reg_write32(mem, PCIE_SOC_WAKE_ADDRESS,
+			       PCIE_SOC_WAKE_V_MASK);
+	for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) {
+		if (ath10k_pci_target_is_awake(ar))
+			break;
+		msleep(1);
+	}
+
+	/* Put Target, including PCIe, into RESET. */
+	val = ath10k_pci_reg_read32(mem, SOC_GLOBAL_RESET_ADDRESS);
+	val |= 1;
+	ath10k_pci_reg_write32(mem, SOC_GLOBAL_RESET_ADDRESS, val);
+
+	for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) {
+		if (ath10k_pci_reg_read32(mem, RTC_STATE_ADDRESS) &
+					  RTC_STATE_COLD_RESET_MASK)
+			break;
+		msleep(1);
+	}
+
+	/* Pull Target, including PCIe, out of RESET. */
+	val &= ~1;
+	ath10k_pci_reg_write32(mem, SOC_GLOBAL_RESET_ADDRESS, val);
+
+	for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) {
+		if (!(ath10k_pci_reg_read32(mem, RTC_STATE_ADDRESS) &
+					    RTC_STATE_COLD_RESET_MASK))
+			break;
+		msleep(1);
+	}
+
+	ath10k_pci_reg_write32(mem, PCIE_SOC_WAKE_ADDRESS, PCIE_SOC_WAKE_RESET);
+}
+
+static void ath10k_pci_dump_features(struct ath10k_pci *ar_pci)
+{
+	int i;
+
+	for (i = 0; i < ATH10K_PCI_FEATURE_COUNT; i++) {
+		if (!test_bit(i, ar_pci->features))
+			continue;
+
+		switch (i) {
+		case ATH10K_PCI_FEATURE_MSI_X:
+			ath10k_dbg(ATH10K_DBG_PCI, "device supports MSI-X\n");
+			break;
+		case ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND:
+			ath10k_dbg(ATH10K_DBG_PCI, "QCA988X_1.0 workaround enabled\n");
+			break;
+		}
+	}
+}
+
+static int ath10k_pci_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *pci_dev)
+{
+	void __iomem *mem;
+	int ret = 0;
+	struct ath10k *ar;
+	struct ath10k_pci *ar_pci;
+	u32 lcr_val;
+
+	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+
+	ar_pci = kzalloc(sizeof(*ar_pci), GFP_KERNEL);
+	if (ar_pci == NULL)
+		return -ENOMEM;
+
+	ar_pci->pdev = pdev;
+	ar_pci->dev = &pdev->dev;
+
+	switch (pci_dev->device) {
+	case QCA988X_1_0_DEVICE_ID:
+		set_bit(ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND, ar_pci->features);
+		break;
+	case QCA988X_2_0_DEVICE_ID:
+		set_bit(ATH10K_PCI_FEATURE_MSI_X, ar_pci->features);
+		break;
+	default:
+		ret = -ENODEV;
+		ath10k_err("Unkown device ID: %d\n", pci_dev->device);
+		goto err_ar_pci;
+	}
+
+	ath10k_pci_dump_features(ar_pci);
+
+	ar = ath10k_core_create(ar_pci, ar_pci->dev, ATH10K_BUS_PCI,
+				&ath10k_pci_hif_ops);
+	if (!ar) {
+		ath10k_err("ath10k_core_create failed!\n");
+		ret = -EINVAL;
+		goto err_ar_pci;
+	}
+
+	/* Enable QCA988X_1.0 HW workarounds */
+	if (test_bit(ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND, ar_pci->features))
+		spin_lock_init(&ar_pci->hw_v1_workaround_lock);
+
+	ar_pci->ar = ar;
+	ar_pci->fw_indicator_address = FW_INDICATOR_ADDRESS;
+	atomic_set(&ar_pci->keep_awake_count, 0);
+
+	pci_set_drvdata(pdev, ar);
+
+	/*
+	 * Without any knowledge of the Host, the Target may have been reset or
+	 * power cycled and its Config Space may no longer reflect the PCI
+	 * address space that was assigned earlier by the PCI infrastructure.
+	 * Refresh it now.
+	 */
+	ret = pci_assign_resource(pdev, BAR_NUM);
+	if (ret) {
+		ath10k_err("cannot assign PCI space: %d\n", ret);
+		goto err_ar;
+	}
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		ath10k_err("cannot enable PCI device: %d\n", ret);
+		goto err_ar;
+	}
+
+	/* Request MMIO resources */
+	ret = pci_request_region(pdev, BAR_NUM, "ath");
+	if (ret) {
+		ath10k_err("PCI MMIO reservation error: %d\n", ret);
+		goto err_device;
+	}
+
+	/*
+	 * Target structures have a limit of 32 bit DMA pointers.
+	 * DMA pointers can be wider than 32 bits by default on some systems.
+	 */
+	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (ret) {
+		ath10k_err("32-bit DMA not available: %d\n", ret);
+		goto err_region;
+	}
+
+	ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (ret) {
+		ath10k_err("cannot enable 32-bit consistent DMA\n");
+		goto err_region;
+	}
+
+	/* Set bus master bit in PCI_COMMAND to enable DMA */
+	pci_set_master(pdev);
+
+	/*
+	 * Temporary FIX: disable ASPM
+	 * Will be removed after the OTP is programmed
+	 */
+	pci_read_config_dword(pdev, 0x80, &lcr_val);
+	pci_write_config_dword(pdev, 0x80, (lcr_val & 0xffffff00));
+
+	/* Arrange for access to Target SoC registers. */
+	mem = pci_iomap(pdev, BAR_NUM, 0);
+	if (!mem) {
+		ath10k_err("PCI iomap error\n");
+		ret = -EIO;
+		goto err_master;
+	}
+
+	ar_pci->mem = mem;
+
+	spin_lock_init(&ar_pci->ce_lock);
+
+	ar_pci->cacheline_sz = dma_get_cache_alignment();
+
+	ret = ath10k_pci_start_intr(ar);
+	if (ret) {
+		ath10k_err("could not start interrupt handling (%d)\n", ret);
+		goto err_iomap;
+	}
+
+	/*
+	 * Bring the target up cleanly.
+	 *
+	 * The target may be in an undefined state with an AUX-powered Target
+	 * and a Host in WoW mode. If the Host crashes, loses power, or is
+	 * restarted (without unloading the driver) then the Target is left
+	 * (aux) powered and running. On a subsequent driver load, the Target
+	 * is in an unexpected state. We try to catch that here in order to
+	 * reset the Target and retry the probe.
+	 */
+	ath10k_pci_device_reset(ar_pci);
+
+	ret = ath10k_pci_reset_target(ar);
+	if (ret)
+		goto err_intr;
+
+	if (ath10k_target_ps) {
+		ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save enabled\n");
+	} else {
+		/* Force AWAKE forever */
+		ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save disabled\n");
+		ath10k_do_pci_wake(ar);
+	}
+
+	ret = ath10k_pci_ce_init(ar);
+	if (ret)
+		goto err_intr;
+
+	ret = ath10k_pci_init_config(ar);
+	if (ret)
+		goto err_ce;
+
+	ret = ath10k_pci_wake_target_cpu(ar);
+	if (ret) {
+		ath10k_err("could not wake up target CPU (%d)\n", ret);
+		goto err_ce;
+	}
+
+	ret = ath10k_core_register(ar);
+	if (ret) {
+		ath10k_err("could not register driver core (%d)\n", ret);
+		goto err_ce;
+	}
+
+	return 0;
+
+err_ce:
+	ath10k_pci_ce_deinit(ar);
+err_intr:
+	ath10k_pci_stop_intr(ar);
+err_iomap:
+	pci_iounmap(pdev, mem);
+err_master:
+	pci_clear_master(pdev);
+err_region:
+	pci_release_region(pdev, BAR_NUM);
+err_device:
+	pci_disable_device(pdev);
+err_ar:
+	pci_set_drvdata(pdev, NULL);
+	ath10k_core_destroy(ar);
+err_ar_pci:
+	/* call HIF PCI free here */
+	kfree(ar_pci);
+
+	return ret;
+}
+
+static void ath10k_pci_remove(struct pci_dev *pdev)
+{
+	struct ath10k *ar = pci_get_drvdata(pdev);
+	struct ath10k_pci *ar_pci;
+
+	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+
+	if (!ar)
+		return;
+
+	ar_pci = ath10k_pci_priv(ar);
+
+	if (!ar_pci)
+		return;
+
+	tasklet_kill(&ar_pci->msi_fw_err);
+
+	ath10k_core_unregister(ar);
+	ath10k_pci_stop_intr(ar);
+
+	pci_set_drvdata(pdev, NULL);
+	pci_iounmap(pdev, ar_pci->mem);
+	pci_release_region(pdev, BAR_NUM);
+	pci_clear_master(pdev);
+	pci_disable_device(pdev);
+
+	ath10k_core_destroy(ar);
+	kfree(ar_pci);
+}
+
+#if defined(CONFIG_PM_SLEEP)
+
+#define ATH10K_PCI_PM_CONTROL 0x44
+
+static int ath10k_pci_suspend(struct device *device)
+{
+	struct pci_dev *pdev = to_pci_dev(device);
+	struct ath10k *ar = pci_get_drvdata(pdev);
+	struct ath10k_pci *ar_pci;
+	u32 val;
+	int ret, retval;
+
+	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+
+	if (!ar)
+		return -ENODEV;
+
+	ar_pci = ath10k_pci_priv(ar);
+	if (!ar_pci)
+		return -ENODEV;
+
+	if (ath10k_core_target_suspend(ar))
+		return -EBUSY;
+
+	ret = wait_event_interruptible_timeout(ar->event_queue,
+						ar->is_target_paused == true,
+						1 * HZ);
+	if (ret < 0) {
+		ath10k_warn("suspend interrupted (%d)\n", ret);
+		retval = ret;
+		goto resume;
+	} else if (ret == 0) {
+		ath10k_warn("suspend timed out - target pause event never came\n");
+		retval = EIO;
+		goto resume;
+	}
+
+	/*
+	 * reset is_target_paused and host can check that in next time,
+	 * or it will always be TRUE and host just skip the waiting
+	 * condition, it causes target assert due to host already
+	 * suspend
+	 */
+	ar->is_target_paused = false;
+
+	pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
+
+	if ((val & 0x000000ff) != 0x3) {
+		pci_save_state(pdev);
+		pci_disable_device(pdev);
+		pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
+				       (val & 0xffffff00) | 0x03);
+	}
+
+	return 0;
+resume:
+	ret = ath10k_core_target_resume(ar);
+	if (ret)
+		ath10k_warn("could not resume (%d)\n", ret);
+
+	return retval;
+}
+
+static int ath10k_pci_resume(struct device *device)
+{
+	struct pci_dev *pdev = to_pci_dev(device);
+	struct ath10k *ar = pci_get_drvdata(pdev);
+	struct ath10k_pci *ar_pci;
+	int ret;
+	u32 val;
+
+	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+
+	if (!ar)
+		return -ENODEV;
+	ar_pci = ath10k_pci_priv(ar);
+
+	if (!ar_pci)
+		return -ENODEV;
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		ath10k_warn("cannot enable PCI device: %d\n", ret);
+		return ret;
+	}
+
+	pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
+
+	if ((val & 0x000000ff) != 0) {
+		pci_restore_state(pdev);
+		pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
+				       val & 0xffffff00);
+		/*
+		 * Suspend/Resume resets the PCI configuration space,
+		 * so we have to re-disable the RETRY_TIMEOUT register (0x41)
+		 * to keep PCI Tx retries from interfering with C3 CPU state
+		 */
+		pci_read_config_dword(pdev, 0x40, &val);
+
+		if ((val & 0x0000ff00) != 0)
+			pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+	}
+
+	ret = ath10k_core_target_resume(ar);
+	if (ret)
+		ath10k_warn("target resume failed: %d\n", ret);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(ath10k_dev_pm_ops,
+			 ath10k_pci_suspend,
+			 ath10k_pci_resume);
+
+#define ATH10K_PCI_PM_OPS (&ath10k_dev_pm_ops)
+
+#else
+
+#define ATH10K_PCI_PM_OPS NULL
+
+#endif /* CONFIG_PM_SLEEP */
+
+MODULE_DEVICE_TABLE(pci, ath10k_pci_id_table);
+
+static struct pci_driver ath10k_pci_driver = {
+	.name = "ath10k_pci",
+	.id_table = ath10k_pci_id_table,
+	.probe = ath10k_pci_probe,
+	.remove = ath10k_pci_remove,
+	.driver.pm = ATH10K_PCI_PM_OPS,
+};
+
+static int __init ath10k_pci_init(void)
+{
+	int ret;
+
+	ret = pci_register_driver(&ath10k_pci_driver);
+	if (ret)
+		ath10k_err("pci_register_driver failed [%d]\n", ret);
+
+	return ret;
+}
+module_init(ath10k_pci_init);
+
+static void __exit ath10k_pci_exit(void)
+{
+	pci_unregister_driver(&ath10k_pci_driver);
+}
+
+module_exit(ath10k_pci_exit);
+
+MODULE_AUTHOR("Qualcomm Atheros");
+MODULE_DESCRIPTION("Driver support for Atheros QCA988X PCIe devices");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_FW_FILE);
+MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_OTP_FILE);
+MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_BOARD_DATA_FILE);
+MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_FILE);
+MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_OTP_FILE);
+MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE);
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
new file mode 100644
index 000000000000..d2a055a07dc6
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -0,0 +1,355 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _PCI_H_
+#define _PCI_H_
+
+#include <linux/interrupt.h>
+
+#include "hw.h"
+#include "ce.h"
+
+/* FW dump area */
+#define REG_DUMP_COUNT_QCA988X 60
+
+/*
+ * maximum number of bytes that can be handled atomically by DiagRead/DiagWrite
+ */
+#define DIAG_TRANSFER_LIMIT 2048
+
+/*
+ * maximum number of bytes that can be
+ * handled atomically by DiagRead/DiagWrite
+ */
+#define DIAG_TRANSFER_LIMIT 2048
+
+struct bmi_xfer {
+	struct completion done;
+	bool wait_for_resp;
+	u32 resp_len;
+};
+
+struct ath10k_pci_compl {
+	struct list_head list;
+	int send_or_recv;
+	struct ce_state *ce_state;
+	struct hif_ce_pipe_info *pipe_info;
+	void *transfer_context;
+	unsigned int nbytes;
+	unsigned int transfer_id;
+	unsigned int flags;
+};
+
+/* compl_state.send_or_recv */
+#define HIF_CE_COMPLETE_FREE 0
+#define HIF_CE_COMPLETE_SEND 1
+#define HIF_CE_COMPLETE_RECV 2
+
+/*
+ * PCI-specific Target state
+ *
+ * NOTE: Structure is shared between Host software and Target firmware!
+ *
+ * Much of this may be of interest to the Host so
+ * HOST_INTEREST->hi_interconnect_state points here
+ * (and all members are 32-bit quantities in order to
+ * facilitate Host access). In particular, Host software is
+ * required to initialize pipe_cfg_addr and svc_to_pipe_map.
+ */
+struct pcie_state {
+	/* Pipe configuration Target address */
+	/* NB: ce_pipe_config[CE_COUNT] */
+	u32 pipe_cfg_addr;
+
+	/* Service to pipe map Target address */
+	/* NB: service_to_pipe[PIPE_TO_CE_MAP_CN] */
+	u32 svc_to_pipe_map;
+
+	/* number of MSI interrupts requested */
+	u32 msi_requested;
+
+	/* number of MSI interrupts granted */
+	u32 msi_granted;
+
+	/* Message Signalled Interrupt address */
+	u32 msi_addr;
+
+	/* Base data */
+	u32 msi_data;
+
+	/*
+	 * Data for firmware interrupt;
+	 * MSI data for other interrupts are
+	 * in various SoC registers
+	 */
+	u32 msi_fw_intr_data;
+
+	/* PCIE_PWR_METHOD_* */
+	u32 power_mgmt_method;
+
+	/* PCIE_CONFIG_FLAG_* */
+	u32 config_flags;
+};
+
+/* PCIE_CONFIG_FLAG definitions */
+#define PCIE_CONFIG_FLAG_ENABLE_L1  0x0000001
+
+/* Host software's Copy Engine configuration. */
+#define CE_ATTR_FLAGS 0
+
+/*
+ * Configuration information for a Copy Engine pipe.
+ * Passed from Host to Target during startup (one per CE).
+ *
+ * NOTE: Structure is shared between Host software and Target firmware!
+ */
+struct ce_pipe_config {
+	u32 pipenum;
+	u32 pipedir;
+	u32 nentries;
+	u32 nbytes_max;
+	u32 flags;
+	u32 reserved;
+};
+
+/*
+ * Directions for interconnect pipe configuration.
+ * These definitions may be used during configuration and are shared
+ * between Host and Target.
+ *
+ * Pipe Directions are relative to the Host, so PIPEDIR_IN means
+ * "coming IN over air through Target to Host" as with a WiFi Rx operation.
+ * Conversely, PIPEDIR_OUT means "going OUT from Host through Target over air"
+ * as with a WiFi Tx operation. This is somewhat awkward for the "middle-man"
+ * Target since things that are "PIPEDIR_OUT" are coming IN to the Target
+ * over the interconnect.
+ */
+#define PIPEDIR_NONE    0
+#define PIPEDIR_IN      1  /* Target-->Host, WiFi Rx direction */
+#define PIPEDIR_OUT     2  /* Host->Target, WiFi Tx direction */
+#define PIPEDIR_INOUT   3  /* bidirectional */
+
+/* Establish a mapping between a service/direction and a pipe. */
+struct service_to_pipe {
+	u32 service_id;
+	u32 pipedir;
+	u32 pipenum;
+};
+
+enum ath10k_pci_features {
+	ATH10K_PCI_FEATURE_MSI_X		= 0,
+	ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND	= 1,
+
+	/* keep last */
+	ATH10K_PCI_FEATURE_COUNT
+};
+
+/* Per-pipe state. */
+struct hif_ce_pipe_info {
+	/* Handle of underlying Copy Engine */
+	struct ce_state *ce_hdl;
+
+	/* Our pipe number; facilitiates use of pipe_info ptrs. */
+	u8 pipe_num;
+
+	/* Convenience back pointer to hif_ce_state. */
+	struct ath10k *hif_ce_state;
+
+	size_t buf_sz;
+
+	/* protects compl_free and num_send_allowed */
+	spinlock_t pipe_lock;
+
+	/* List of free CE completion slots */
+	struct list_head compl_free;
+
+	/* Limit the number of outstanding send requests. */
+	int num_sends_allowed;
+
+	struct ath10k_pci *ar_pci;
+	struct tasklet_struct intr;
+};
+
+struct ath10k_pci {
+	struct pci_dev *pdev;
+	struct device *dev;
+	struct ath10k *ar;
+	void __iomem *mem;
+	int cacheline_sz;
+
+	DECLARE_BITMAP(features, ATH10K_PCI_FEATURE_COUNT);
+
+	/*
+	 * Number of MSI interrupts granted, 0 --> using legacy PCI line
+	 * interrupts.
+	 */
+	int num_msi_intrs;
+
+	struct tasklet_struct intr_tq;
+	struct tasklet_struct msi_fw_err;
+
+	/* Number of Copy Engines supported */
+	unsigned int ce_count;
+
+	int started;
+
+	atomic_t keep_awake_count;
+	bool verified_awake;
+
+	/* List of CE completions to be processed */
+	struct list_head compl_process;
+
+	/* protects compl_processing and compl_process */
+	spinlock_t compl_lock;
+
+	bool compl_processing;
+
+	struct hif_ce_pipe_info pipe_info[CE_COUNT_MAX];
+
+	struct ath10k_hif_cb msg_callbacks_current;
+
+	/* Target address used to signal a pending firmware event */
+	u32 fw_indicator_address;
+
+	/* Copy Engine used for Diagnostic Accesses */
+	struct ce_state *ce_diag;
+
+	/* FIXME: document what this really protects */
+	spinlock_t ce_lock;
+
+	/* Map CE id to ce_state */
+	struct ce_state *ce_id_to_state[CE_COUNT_MAX];
+
+	/* makes sure that dummy reads are atomic */
+	spinlock_t hw_v1_workaround_lock;
+};
+
+static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar)
+{
+	return ar->hif.priv;
+}
+
+static inline u32 ath10k_pci_reg_read32(void __iomem *mem, u32 addr)
+{
+	return ioread32(mem + PCIE_LOCAL_BASE_ADDRESS + addr);
+}
+
+static inline void ath10k_pci_reg_write32(void __iomem *mem, u32 addr, u32 val)
+{
+	iowrite32(val, mem + PCIE_LOCAL_BASE_ADDRESS + addr);
+}
+
+#define ATH_PCI_RESET_WAIT_MAX 10 /* ms */
+#define PCIE_WAKE_TIMEOUT 5000	/* 5ms */
+
+#define BAR_NUM 0
+
+#define CDC_WAR_MAGIC_STR   0xceef0000
+#define CDC_WAR_DATA_CE     4
+
+/*
+ * TODO: Should be a function call specific to each Target-type.
+ * This convoluted macro converts from Target CPU Virtual Address Space to CE
+ * Address Space. As part of this process, we conservatively fetch the current
+ * PCIE_BAR. MOST of the time, this should match the upper bits of PCI space
+ * for this device; but that's not guaranteed.
+ */
+#define TARG_CPU_SPACE_TO_CE_SPACE(ar, pci_addr, addr)			\
+	(((ioread32((pci_addr)+(SOC_CORE_BASE_ADDRESS|			\
+	  CORE_CTRL_ADDRESS)) & 0x7ff) << 21) |				\
+	 0x100000 | ((addr) & 0xfffff))
+
+/* Wait up to this many Ms for a Diagnostic Access CE operation to complete */
+#define DIAG_ACCESS_CE_TIMEOUT_MS 10
+
+/*
+ * This API allows the Host to access Target registers directly
+ * and relatively efficiently over PCIe.
+ * This allows the Host to avoid extra overhead associated with
+ * sending a message to firmware and waiting for a response message
+ * from firmware, as is done on other interconnects.
+ *
+ * Yet there is some complexity with direct accesses because the
+ * Target's power state is not known a priori. The Host must issue
+ * special PCIe reads/writes in order to explicitly wake the Target
+ * and to verify that it is awake and will remain awake.
+ *
+ * Usage:
+ *
+ *   Use ath10k_pci_read32 and ath10k_pci_write32 to access Target space.
+ *   These calls must be bracketed by ath10k_pci_wake and
+ *   ath10k_pci_sleep.  A single BEGIN/END pair is adequate for
+ *   multiple READ/WRITE operations.
+ *
+ *   Use ath10k_pci_wake to put the Target in a state in
+ *   which it is legal for the Host to directly access it. This
+ *   may involve waking the Target from a low power state, which
+ *   may take up to 2Ms!
+ *
+ *   Use ath10k_pci_sleep to tell the Target that as far as
+ *   this code path is concerned, it no longer needs to remain
+ *   directly accessible.  BEGIN/END is under a reference counter;
+ *   multiple code paths may issue BEGIN/END on a single targid.
+ */
+static inline void ath10k_pci_write32(struct ath10k *ar, u32 offset,
+				      u32 value)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	void __iomem *addr = ar_pci->mem;
+
+	if (test_bit(ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND, ar_pci->features)) {
+		unsigned long irq_flags;
+
+		spin_lock_irqsave(&ar_pci->hw_v1_workaround_lock, irq_flags);
+
+		ioread32(addr+offset+4); /* 3rd read prior to write */
+		ioread32(addr+offset+4); /* 2nd read prior to write */
+		ioread32(addr+offset+4); /* 1st read prior to write */
+		iowrite32(value, addr+offset);
+
+		spin_unlock_irqrestore(&ar_pci->hw_v1_workaround_lock,
+				       irq_flags);
+	} else {
+		iowrite32(value, addr+offset);
+	}
+}
+
+static inline u32 ath10k_pci_read32(struct ath10k *ar, u32 offset)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	return ioread32(ar_pci->mem + offset);
+}
+
+extern unsigned int ath10k_target_ps;
+
+void ath10k_do_pci_wake(struct ath10k *ar);
+void ath10k_do_pci_sleep(struct ath10k *ar);
+
+static inline void ath10k_pci_wake(struct ath10k *ar)
+{
+	if (ath10k_target_ps)
+		ath10k_do_pci_wake(ar);
+}
+
+static inline void ath10k_pci_sleep(struct ath10k *ar)
+{
+	if (ath10k_target_ps)
+		ath10k_do_pci_sleep(ar);
+}
+
+#endif /* _PCI_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
new file mode 100644
index 000000000000..bfec6c8f2ecb
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -0,0 +1,990 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _RX_DESC_H_
+#define _RX_DESC_H_
+
+enum rx_attention_flags {
+	RX_ATTENTION_FLAGS_FIRST_MPDU          = 1 << 0,
+	RX_ATTENTION_FLAGS_LAST_MPDU           = 1 << 1,
+	RX_ATTENTION_FLAGS_MCAST_BCAST         = 1 << 2,
+	RX_ATTENTION_FLAGS_PEER_IDX_INVALID    = 1 << 3,
+	RX_ATTENTION_FLAGS_PEER_IDX_TIMEOUT    = 1 << 4,
+	RX_ATTENTION_FLAGS_POWER_MGMT          = 1 << 5,
+	RX_ATTENTION_FLAGS_NON_QOS             = 1 << 6,
+	RX_ATTENTION_FLAGS_NULL_DATA           = 1 << 7,
+	RX_ATTENTION_FLAGS_MGMT_TYPE           = 1 << 8,
+	RX_ATTENTION_FLAGS_CTRL_TYPE           = 1 << 9,
+	RX_ATTENTION_FLAGS_MORE_DATA           = 1 << 10,
+	RX_ATTENTION_FLAGS_EOSP                = 1 << 11,
+	RX_ATTENTION_FLAGS_U_APSD_TRIGGER      = 1 << 12,
+	RX_ATTENTION_FLAGS_FRAGMENT            = 1 << 13,
+	RX_ATTENTION_FLAGS_ORDER               = 1 << 14,
+	RX_ATTENTION_FLAGS_CLASSIFICATION      = 1 << 15,
+	RX_ATTENTION_FLAGS_OVERFLOW_ERR        = 1 << 16,
+	RX_ATTENTION_FLAGS_MSDU_LENGTH_ERR     = 1 << 17,
+	RX_ATTENTION_FLAGS_TCP_UDP_CHKSUM_FAIL = 1 << 18,
+	RX_ATTENTION_FLAGS_IP_CHKSUM_FAIL      = 1 << 19,
+	RX_ATTENTION_FLAGS_SA_IDX_INVALID      = 1 << 20,
+	RX_ATTENTION_FLAGS_DA_IDX_INVALID      = 1 << 21,
+	RX_ATTENTION_FLAGS_SA_IDX_TIMEOUT      = 1 << 22,
+	RX_ATTENTION_FLAGS_DA_IDX_TIMEOUT      = 1 << 23,
+	RX_ATTENTION_FLAGS_ENCRYPT_REQUIRED    = 1 << 24,
+	RX_ATTENTION_FLAGS_DIRECTED            = 1 << 25,
+	RX_ATTENTION_FLAGS_BUFFER_FRAGMENT     = 1 << 26,
+	RX_ATTENTION_FLAGS_MPDU_LENGTH_ERR     = 1 << 27,
+	RX_ATTENTION_FLAGS_TKIP_MIC_ERR        = 1 << 28,
+	RX_ATTENTION_FLAGS_DECRYPT_ERR         = 1 << 29,
+	RX_ATTENTION_FLAGS_FCS_ERR             = 1 << 30,
+	RX_ATTENTION_FLAGS_MSDU_DONE           = 1 << 31,
+};
+
+struct rx_attention {
+	__le32 flags; /* %RX_ATTENTION_FLAGS_ */
+} __packed;
+
+/*
+ * first_mpdu
+ *		Indicates the first MSDU of the PPDU.  If both first_mpdu
+ *		and last_mpdu are set in the MSDU then this is a not an
+ *		A-MPDU frame but a stand alone MPDU.  Interior MPDU in an
+ *		A-MPDU shall have both first_mpdu and last_mpdu bits set to
+ *		0.  The PPDU start status will only be valid when this bit
+ *		is set.
+ *
+ * last_mpdu
+ *		Indicates the last MSDU of the last MPDU of the PPDU.  The
+ *		PPDU end status will only be valid when this bit is set.
+ *
+ * mcast_bcast
+ *		Multicast / broadcast indicator.  Only set when the MAC
+ *		address 1 bit 0 is set indicating mcast/bcast and the BSSID
+ *		matches one of the 4 BSSID registers. Only set when
+ *		first_msdu is set.
+ *
+ * peer_idx_invalid
+ *		Indicates no matching entries within the the max search
+ *		count.  Only set when first_msdu is set.
+ *
+ * peer_idx_timeout
+ *		Indicates an unsuccessful search for the peer index due to
+ *		timeout.  Only set when first_msdu is set.
+ *
+ * power_mgmt
+ *		Power management bit set in the 802.11 header.  Only set
+ *		when first_msdu is set.
+ *
+ * non_qos
+ *		Set if packet is not a non-QoS data frame.  Only set when
+ *		first_msdu is set.
+ *
+ * null_data
+ *		Set if frame type indicates either null data or QoS null
+ *		data format.  Only set when first_msdu is set.
+ *
+ * mgmt_type
+ *		Set if packet is a management packet.  Only set when
+ *		first_msdu is set.
+ *
+ * ctrl_type
+ *		Set if packet is a control packet.  Only set when first_msdu
+ *		is set.
+ *
+ * more_data
+ *		Set if more bit in frame control is set.  Only set when
+ *		first_msdu is set.
+ *
+ * eosp
+ *		Set if the EOSP (end of service period) bit in the QoS
+ *		control field is set.  Only set when first_msdu is set.
+ *
+ * u_apsd_trigger
+ *		Set if packet is U-APSD trigger.  Key table will have bits
+ *		per TID to indicate U-APSD trigger.
+ *
+ * fragment
+ *		Indicates that this is an 802.11 fragment frame.  This is
+ *		set when either the more_frag bit is set in the frame
+ *		control or the fragment number is not zero.  Only set when
+ *		first_msdu is set.
+ *
+ * order
+ *		Set if the order bit in the frame control is set.  Only set
+ *		when first_msdu is set.
+ *
+ * classification
+ *		Indicates that this status has a corresponding MSDU that
+ *		requires FW processing.  The OLE will have classification
+ *		ring mask registers which will indicate the ring(s) for
+ *		packets and descriptors which need FW attention.
+ *
+ * overflow_err
+ *		PCU Receive FIFO does not have enough space to store the
+ *		full receive packet.  Enough space is reserved in the
+ *		receive FIFO for the status is written.  This MPDU remaining
+ *		packets in the PPDU will be filtered and no Ack response
+ *		will be transmitted.
+ *
+ * msdu_length_err
+ *		Indicates that the MSDU length from the 802.3 encapsulated
+ *		length field extends beyond the MPDU boundary.
+ *
+ * tcp_udp_chksum_fail
+ *		Indicates that the computed checksum (tcp_udp_chksum) did
+ *		not match the checksum in the TCP/UDP header.
+ *
+ * ip_chksum_fail
+ *		Indicates that the computed checksum did not match the
+ *		checksum in the IP header.
+ *
+ * sa_idx_invalid
+ *		Indicates no matching entry was found in the address search
+ *		table for the source MAC address.
+ *
+ * da_idx_invalid
+ *		Indicates no matching entry was found in the address search
+ *		table for the destination MAC address.
+ *
+ * sa_idx_timeout
+ *		Indicates an unsuccessful search for the source MAC address
+ *		due to the expiring of the search timer.
+ *
+ * da_idx_timeout
+ *		Indicates an unsuccessful search for the destination MAC
+ *		address due to the expiring of the search timer.
+ *
+ * encrypt_required
+ *		Indicates that this data type frame is not encrypted even if
+ *		the policy for this MPDU requires encryption as indicated in
+ *		the peer table key type.
+ *
+ * directed
+ *		MPDU is a directed packet which means that the RA matched
+ *		our STA addresses.  In proxySTA it means that the TA matched
+ *		an entry in our address search table with the corresponding
+ *		'no_ack' bit is the address search entry cleared.
+ *
+ * buffer_fragment
+ *		Indicates that at least one of the rx buffers has been
+ *		fragmented.  If set the FW should look at the rx_frag_info
+ *		descriptor described below.
+ *
+ * mpdu_length_err
+ *		Indicates that the MPDU was pre-maturely terminated
+ *		resulting in a truncated MPDU.  Don't trust the MPDU length
+ *		field.
+ *
+ * tkip_mic_err
+ *		Indicates that the MPDU Michael integrity check failed
+ *
+ * decrypt_err
+ *		Indicates that the MPDU decrypt integrity check failed
+ *
+ * fcs_err
+ *		Indicates that the MPDU FCS check failed
+ *
+ * msdu_done
+ *		If set indicates that the RX packet data, RX header data, RX
+ *		PPDU start descriptor, RX MPDU start/end descriptor, RX MSDU
+ *		start/end descriptors and RX Attention descriptor are all
+ *		valid.  This bit must be in the last octet of the
+ *		descriptor.
+ */
+
+struct rx_frag_info {
+	u8 ring0_more_count;
+	u8 ring1_more_count;
+	u8 ring2_more_count;
+	u8 ring3_more_count;
+} __packed;
+
+/*
+ * ring0_more_count
+ *		Indicates the number of more buffers associated with RX DMA
+ *		ring 0.  Field is filled in by the RX_DMA.
+ *
+ * ring1_more_count
+ *		Indicates the number of more buffers associated with RX DMA
+ *		ring 1. Field is filled in by the RX_DMA.
+ *
+ * ring2_more_count
+ *		Indicates the number of more buffers associated with RX DMA
+ *		ring 2. Field is filled in by the RX_DMA.
+ *
+ * ring3_more_count
+ *		Indicates the number of more buffers associated with RX DMA
+ *		ring 3. Field is filled in by the RX_DMA.
+ */
+
+enum htt_rx_mpdu_encrypt_type {
+	HTT_RX_MPDU_ENCRYPT_WEP40            = 0,
+	HTT_RX_MPDU_ENCRYPT_WEP104           = 1,
+	HTT_RX_MPDU_ENCRYPT_TKIP_WITHOUT_MIC = 2,
+	HTT_RX_MPDU_ENCRYPT_WEP128           = 3,
+	HTT_RX_MPDU_ENCRYPT_TKIP_WPA         = 4,
+	HTT_RX_MPDU_ENCRYPT_WAPI             = 5,
+	HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2     = 6,
+	HTT_RX_MPDU_ENCRYPT_NONE             = 7,
+};
+
+#define RX_MPDU_START_INFO0_PEER_IDX_MASK     0x000007ff
+#define RX_MPDU_START_INFO0_PEER_IDX_LSB      0
+#define RX_MPDU_START_INFO0_SEQ_NUM_MASK      0x0fff0000
+#define RX_MPDU_START_INFO0_SEQ_NUM_LSB       16
+#define RX_MPDU_START_INFO0_ENCRYPT_TYPE_MASK 0xf0000000
+#define RX_MPDU_START_INFO0_ENCRYPT_TYPE_LSB  28
+#define RX_MPDU_START_INFO0_FROM_DS           (1 << 11)
+#define RX_MPDU_START_INFO0_TO_DS             (1 << 12)
+#define RX_MPDU_START_INFO0_ENCRYPTED         (1 << 13)
+#define RX_MPDU_START_INFO0_RETRY             (1 << 14)
+#define RX_MPDU_START_INFO0_TXBF_H_INFO       (1 << 15)
+
+#define RX_MPDU_START_INFO1_TID_MASK 0xf0000000
+#define RX_MPDU_START_INFO1_TID_LSB  28
+#define RX_MPDU_START_INFO1_DIRECTED (1 << 16)
+
+struct rx_mpdu_start {
+	__le32 info0;
+	union {
+		struct {
+			__le32 pn31_0;
+			__le32 info1; /* %RX_MPDU_START_INFO1_ */
+		} __packed;
+		struct {
+			u8 pn[6];
+		} __packed;
+	} __packed;
+} __packed;
+
+/*
+ * peer_idx
+ *		The index of the address search table which associated with
+ *		the peer table entry corresponding to this MPDU.  Only valid
+ *		when first_msdu is set.
+ *
+ * fr_ds
+ *		Set if the from DS bit is set in the frame control.  Only
+ *		valid when first_msdu is set.
+ *
+ * to_ds
+ *		Set if the to DS bit is set in the frame control.  Only
+ *		valid when first_msdu is set.
+ *
+ * encrypted
+ *		Protected bit from the frame control.  Only valid when
+ *		first_msdu is set.
+ *
+ * retry
+ *		Retry bit from the frame control.  Only valid when
+ *		first_msdu is set.
+ *
+ * txbf_h_info
+ *		The MPDU data will contain H information.  Primarily used
+ *		for debug.
+ *
+ * seq_num
+ *		The sequence number from the 802.11 header.  Only valid when
+ *		first_msdu is set.
+ *
+ * encrypt_type
+ *		Indicates type of decrypt cipher used (as defined in the
+ *		peer table)
+ *		0: WEP40
+ *		1: WEP104
+ *		2: TKIP without MIC
+ *		3: WEP128
+ *		4: TKIP (WPA)
+ *		5: WAPI
+ *		6: AES-CCM (WPA2)
+ *		7: No cipher
+ *		Only valid when first_msdu_is set
+ *
+ * pn_31_0
+ *		Bits [31:0] of the PN number extracted from the IV field
+ *		WEP: IV = {key_id_octet, pn2, pn1, pn0}.  Only pn[23:0] is
+ *		valid.
+ *		TKIP: IV = {pn5, pn4, pn3, pn2, key_id_octet, pn0,
+ *		WEPSeed[1], pn1}.  Only pn[47:0] is valid.
+ *		AES-CCM: IV = {pn5, pn4, pn3, pn2, key_id_octet, 0x0, pn1,
+ *		pn0}.  Only pn[47:0] is valid.
+ *		WAPI: IV = {key_id_octet, 0x0, pn15, pn14, pn13, pn12, pn11,
+ *		pn10, pn9, pn8, pn7, pn6, pn5, pn4, pn3, pn2, pn1, pn0}.
+ *		The ext_wapi_pn[127:48] in the rx_msdu_misc descriptor and
+ *		pn[47:0] are valid.
+ *		Only valid when first_msdu is set.
+ *
+ * pn_47_32
+ *		Bits [47:32] of the PN number.   See description for
+ *		pn_31_0.  The remaining PN fields are in the rx_msdu_end
+ *		descriptor
+ *
+ * pn
+ *		Use this field to access the pn without worrying about
+ *		byte-order and bitmasking/bitshifting.
+ *
+ * directed
+ *		See definition in RX attention descriptor
+ *
+ * reserved_2
+ *		Reserved: HW should fill with zero.  FW should ignore.
+ *
+ * tid
+ *		The TID field in the QoS control field
+ */
+
+#define RX_MPDU_END_INFO0_RESERVED_0_MASK     0x00001fff
+#define RX_MPDU_END_INFO0_RESERVED_0_LSB      0
+#define RX_MPDU_END_INFO0_POST_DELIM_CNT_MASK 0x0fff0000
+#define RX_MPDU_END_INFO0_POST_DELIM_CNT_LSB  16
+#define RX_MPDU_END_INFO0_OVERFLOW_ERR        (1 << 13)
+#define RX_MPDU_END_INFO0_LAST_MPDU           (1 << 14)
+#define RX_MPDU_END_INFO0_POST_DELIM_ERR      (1 << 15)
+#define RX_MPDU_END_INFO0_MPDU_LENGTH_ERR     (1 << 28)
+#define RX_MPDU_END_INFO0_TKIP_MIC_ERR        (1 << 29)
+#define RX_MPDU_END_INFO0_DECRYPT_ERR         (1 << 30)
+#define RX_MPDU_END_INFO0_FCS_ERR             (1 << 31)
+
+struct rx_mpdu_end {
+	__le32 info0;
+} __packed;
+
+/*
+ * reserved_0
+ *		Reserved
+ *
+ * overflow_err
+ *		PCU Receive FIFO does not have enough space to store the
+ *		full receive packet.  Enough space is reserved in the
+ *		receive FIFO for the status is written.  This MPDU remaining
+ *		packets in the PPDU will be filtered and no Ack response
+ *		will be transmitted.
+ *
+ * last_mpdu
+ *		Indicates that this is the last MPDU of a PPDU.
+ *
+ * post_delim_err
+ *		Indicates that a delimiter FCS error occurred after this
+ *		MPDU before the next MPDU.  Only valid when last_msdu is
+ *		set.
+ *
+ * post_delim_cnt
+ *		Count of the delimiters after this MPDU.  This requires the
+ *		last MPDU to be held until all the EOF descriptors have been
+ *		received.  This may be inefficient in the future when
+ *		ML-MIMO is used.  Only valid when last_mpdu is set.
+ *
+ * mpdu_length_err
+ *		See definition in RX attention descriptor
+ *
+ * tkip_mic_err
+ *		See definition in RX attention descriptor
+ *
+ * decrypt_err
+ *		See definition in RX attention descriptor
+ *
+ * fcs_err
+ *		See definition in RX attention descriptor
+ */
+
+#define RX_MSDU_START_INFO0_MSDU_LENGTH_MASK    0x00003fff
+#define RX_MSDU_START_INFO0_MSDU_LENGTH_LSB     0
+#define RX_MSDU_START_INFO0_IP_OFFSET_MASK      0x000fc000
+#define RX_MSDU_START_INFO0_IP_OFFSET_LSB       14
+#define RX_MSDU_START_INFO0_RING_MASK_MASK      0x00f00000
+#define RX_MSDU_START_INFO0_RING_MASK_LSB       20
+#define RX_MSDU_START_INFO0_TCP_UDP_OFFSET_MASK 0x7f000000
+#define RX_MSDU_START_INFO0_TCP_UDP_OFFSET_LSB  24
+
+#define RX_MSDU_START_INFO1_MSDU_NUMBER_MASK    0x000000ff
+#define RX_MSDU_START_INFO1_MSDU_NUMBER_LSB     0
+#define RX_MSDU_START_INFO1_DECAP_FORMAT_MASK   0x00000300
+#define RX_MSDU_START_INFO1_DECAP_FORMAT_LSB    8
+#define RX_MSDU_START_INFO1_SA_IDX_MASK         0x07ff0000
+#define RX_MSDU_START_INFO1_SA_IDX_LSB          16
+#define RX_MSDU_START_INFO1_IPV4_PROTO          (1 << 10)
+#define RX_MSDU_START_INFO1_IPV6_PROTO          (1 << 11)
+#define RX_MSDU_START_INFO1_TCP_PROTO           (1 << 12)
+#define RX_MSDU_START_INFO1_UDP_PROTO           (1 << 13)
+#define RX_MSDU_START_INFO1_IP_FRAG             (1 << 14)
+#define RX_MSDU_START_INFO1_TCP_ONLY_ACK        (1 << 15)
+
+enum rx_msdu_decap_format {
+	RX_MSDU_DECAP_RAW           = 0,
+	RX_MSDU_DECAP_NATIVE_WIFI   = 1,
+	RX_MSDU_DECAP_ETHERNET2_DIX = 2,
+	RX_MSDU_DECAP_8023_SNAP_LLC = 3
+};
+
+struct rx_msdu_start {
+	__le32 info0; /* %RX_MSDU_START_INFO0_ */
+	__le32 flow_id_crc;
+	__le32 info1; /* %RX_MSDU_START_INFO1_ */
+} __packed;
+
+/*
+ * msdu_length
+ *		MSDU length in bytes after decapsulation.  This field is
+ *		still valid for MPDU frames without A-MSDU.  It still
+ *		represents MSDU length after decapsulation
+ *
+ * ip_offset
+ *		Indicates the IP offset in bytes from the start of the
+ *		packet after decapsulation.  Only valid if ipv4_proto or
+ *		ipv6_proto is set.
+ *
+ * ring_mask
+ *		Indicates the destination RX rings for this MSDU.
+ *
+ * tcp_udp_offset
+ *		Indicates the offset in bytes to the start of TCP or UDP
+ *		header from the start of the IP header after decapsulation.
+ *		Only valid if tcp_prot or udp_prot is set.  The value 0
+ *		indicates that the offset is longer than 127 bytes.
+ *
+ * reserved_0c
+ *		Reserved: HW should fill with zero.  FW should ignore.
+ *
+ * flow_id_crc
+ *		The flow_id_crc runs CRC32 on the following information:
+ *		IPv4 option: dest_addr[31:0], src_addr [31:0], {24'b0,
+ *		protocol[7:0]}.
+ *		IPv6 option: dest_addr[127:0], src_addr [127:0], {24'b0,
+ *		next_header[7:0]}
+ *		UDP case: sort_port[15:0], dest_port[15:0]
+ *		TCP case: sort_port[15:0], dest_port[15:0],
+ *		{header_length[3:0], 6'b0, flags[5:0], window_size[15:0]},
+ *		{16'b0, urgent_ptr[15:0]}, all options except 32-bit
+ *		timestamp.
+ *
+ * msdu_number
+ *		Indicates the MSDU number within a MPDU.  This value is
+ *		reset to zero at the start of each MPDU.  If the number of
+ *		MSDU exceeds 255 this number will wrap using modulo 256.
+ *
+ * decap_format
+ *		Indicates the format after decapsulation:
+ *		0: RAW: No decapsulation
+ *		1: Native WiFi
+ *		2: Ethernet 2 (DIX)
+ *		3: 802.3 (SNAP/LLC)
+ *
+ * ipv4_proto
+ *		Set if L2 layer indicates IPv4 protocol.
+ *
+ * ipv6_proto
+ *		Set if L2 layer indicates IPv6 protocol.
+ *
+ * tcp_proto
+ *		Set if the ipv4_proto or ipv6_proto are set and the IP
+ *		protocol indicates TCP.
+ *
+ * udp_proto
+ *		Set if the ipv4_proto or ipv6_proto are set and the IP
+ *			protocol indicates UDP.
+ *
+ * ip_frag
+ *		Indicates that either the IP More frag bit is set or IP frag
+ *		number is non-zero.  If set indicates that this is a
+ *		fragmented IP packet.
+ *
+ * tcp_only_ack
+ *		Set if only the TCP Ack bit is set in the TCP flags and if
+ *		the TCP payload is 0.
+ *
+ * sa_idx
+ *		The offset in the address table which matches the MAC source
+ *		address.
+ *
+ * reserved_2b
+ *		Reserved: HW should fill with zero.  FW should ignore.
+ */
+
+#define RX_MSDU_END_INFO0_REPORTED_MPDU_LENGTH_MASK 0x00003fff
+#define RX_MSDU_END_INFO0_REPORTED_MPDU_LENGTH_LSB  0
+#define RX_MSDU_END_INFO0_FIRST_MSDU                (1 << 14)
+#define RX_MSDU_END_INFO0_LAST_MSDU                 (1 << 15)
+#define RX_MSDU_END_INFO0_PRE_DELIM_ERR             (1 << 30)
+#define RX_MSDU_END_INFO0_RESERVED_3B               (1 << 31)
+
+struct rx_msdu_end {
+	__le16 ip_hdr_cksum;
+	__le16 tcp_hdr_cksum;
+	u8 key_id_octet;
+	u8 classification_filter;
+	u8 wapi_pn[10];
+	__le32 info0;
+} __packed;
+
+/*
+ *ip_hdr_chksum
+ *		This can include the IP header checksum or the pseudo header
+ *		checksum used by TCP/UDP checksum.
+ *
+ *tcp_udp_chksum
+ *		The value of the computed TCP/UDP checksum.  A mode bit
+ *		selects whether this checksum is the full checksum or the
+ *		partial checksum which does not include the pseudo header.
+ *
+ *key_id_octet
+ *		The key ID octet from the IV.  Only valid when first_msdu is
+ *		set.
+ *
+ *classification_filter
+ *		Indicates the number classification filter rule
+ *
+ *ext_wapi_pn_63_48
+ *		Extension PN (packet number) which is only used by WAPI.
+ *		This corresponds to WAPI PN bits [63:48] (pn6 and pn7).  The
+ *		WAPI PN bits [63:0] are in the pn field of the rx_mpdu_start
+ *		descriptor.
+ *
+ *ext_wapi_pn_95_64
+ *		Extension PN (packet number) which is only used by WAPI.
+ *		This corresponds to WAPI PN bits [95:64] (pn8, pn9, pn10 and
+ *		pn11).
+ *
+ *ext_wapi_pn_127_96
+ *		Extension PN (packet number) which is only used by WAPI.
+ *		This corresponds to WAPI PN bits [127:96] (pn12, pn13, pn14,
+ *		pn15).
+ *
+ *reported_mpdu_length
+ *		MPDU length before decapsulation.  Only valid when
+ *		first_msdu is set.  This field is taken directly from the
+ *		length field of the A-MPDU delimiter or the preamble length
+ *		field for non-A-MPDU frames.
+ *
+ *first_msdu
+ *		Indicates the first MSDU of A-MSDU.  If both first_msdu and
+ *		last_msdu are set in the MSDU then this is a non-aggregated
+ *		MSDU frame: normal MPDU.  Interior MSDU in an A-MSDU shall
+ *		have both first_mpdu and last_mpdu bits set to 0.
+ *
+ *last_msdu
+ *		Indicates the last MSDU of the A-MSDU.  MPDU end status is
+ *		only valid when last_msdu is set.
+ *
+ *reserved_3a
+ *		Reserved: HW should fill with zero.  FW should ignore.
+ *
+ *pre_delim_err
+ *		Indicates that the first delimiter had a FCS failure.  Only
+ *		valid when first_mpdu and first_msdu are set.
+ *
+ *reserved_3b
+ *		Reserved: HW should fill with zero.  FW should ignore.
+ */
+
+#define RX_PPDU_START_SIG_RATE_SELECT_OFDM 0
+#define RX_PPDU_START_SIG_RATE_SELECT_CCK  1
+
+#define RX_PPDU_START_SIG_RATE_OFDM_48 0
+#define RX_PPDU_START_SIG_RATE_OFDM_24 1
+#define RX_PPDU_START_SIG_RATE_OFDM_12 2
+#define RX_PPDU_START_SIG_RATE_OFDM_6  3
+#define RX_PPDU_START_SIG_RATE_OFDM_54 4
+#define RX_PPDU_START_SIG_RATE_OFDM_36 5
+#define RX_PPDU_START_SIG_RATE_OFDM_18 6
+#define RX_PPDU_START_SIG_RATE_OFDM_9  7
+
+#define RX_PPDU_START_SIG_RATE_CCK_LP_11  0
+#define RX_PPDU_START_SIG_RATE_CCK_LP_5_5 1
+#define RX_PPDU_START_SIG_RATE_CCK_LP_2   2
+#define RX_PPDU_START_SIG_RATE_CCK_LP_1   3
+#define RX_PPDU_START_SIG_RATE_CCK_SP_11  4
+#define RX_PPDU_START_SIG_RATE_CCK_SP_5_5 5
+#define RX_PPDU_START_SIG_RATE_CCK_SP_2   6
+
+#define HTT_RX_PPDU_START_PREAMBLE_LEGACY        0x04
+#define HTT_RX_PPDU_START_PREAMBLE_HT            0x08
+#define HTT_RX_PPDU_START_PREAMBLE_HT_WITH_TXBF  0x09
+#define HTT_RX_PPDU_START_PREAMBLE_VHT           0x0C
+#define HTT_RX_PPDU_START_PREAMBLE_VHT_WITH_TXBF 0x0D
+
+#define RX_PPDU_START_INFO0_IS_GREENFIELD (1 << 0)
+
+#define RX_PPDU_START_INFO1_L_SIG_RATE_MASK    0x0000000f
+#define RX_PPDU_START_INFO1_L_SIG_RATE_LSB     0
+#define RX_PPDU_START_INFO1_L_SIG_LENGTH_MASK  0x0001ffe0
+#define RX_PPDU_START_INFO1_L_SIG_LENGTH_LSB   5
+#define RX_PPDU_START_INFO1_L_SIG_TAIL_MASK    0x00fc0000
+#define RX_PPDU_START_INFO1_L_SIG_TAIL_LSB     18
+#define RX_PPDU_START_INFO1_PREAMBLE_TYPE_MASK 0xff000000
+#define RX_PPDU_START_INFO1_PREAMBLE_TYPE_LSB  24
+#define RX_PPDU_START_INFO1_L_SIG_RATE_SELECT  (1 << 4)
+#define RX_PPDU_START_INFO1_L_SIG_PARITY       (1 << 17)
+
+#define RX_PPDU_START_INFO2_HT_SIG_VHT_SIG_A_1_MASK 0x00ffffff
+#define RX_PPDU_START_INFO2_HT_SIG_VHT_SIG_A_1_LSB  0
+
+#define RX_PPDU_START_INFO3_HT_SIG_VHT_SIG_A_2_MASK 0x00ffffff
+#define RX_PPDU_START_INFO3_HT_SIG_VHT_SIG_A_2_LSB  0
+#define RX_PPDU_START_INFO3_TXBF_H_INFO             (1 << 24)
+
+#define RX_PPDU_START_INFO4_VHT_SIG_B_MASK 0x1fffffff
+#define RX_PPDU_START_INFO4_VHT_SIG_B_LSB  0
+
+#define RX_PPDU_START_INFO5_SERVICE_MASK 0x0000ffff
+#define RX_PPDU_START_INFO5_SERVICE_LSB  0
+
+struct rx_ppdu_start {
+	struct {
+		u8 pri20_mhz;
+		u8 ext20_mhz;
+		u8 ext40_mhz;
+		u8 ext80_mhz;
+	} rssi_chains[4];
+	u8 rssi_comb;
+	__le16 rsvd0;
+	u8 info0; /* %RX_PPDU_START_INFO0_ */
+	__le32 info1; /* %RX_PPDU_START_INFO1_ */
+	__le32 info2; /* %RX_PPDU_START_INFO2_ */
+	__le32 info3; /* %RX_PPDU_START_INFO3_ */
+	__le32 info4; /* %RX_PPDU_START_INFO4_ */
+	__le32 info5; /* %RX_PPDU_START_INFO5_ */
+} __packed;
+
+/*
+ * rssi_chain0_pri20
+ *		RSSI of RX PPDU on chain 0 of primary 20 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain0_sec20
+ *		RSSI of RX PPDU on chain 0 of secondary 20 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain0_sec40
+ *		RSSI of RX PPDU on chain 0 of secondary 40 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain0_sec80
+ *		RSSI of RX PPDU on chain 0 of secondary 80 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain1_pri20
+ *		RSSI of RX PPDU on chain 1 of primary 20 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain1_sec20
+ *		RSSI of RX PPDU on chain 1 of secondary 20 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain1_sec40
+ *		RSSI of RX PPDU on chain 1 of secondary 40 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain1_sec80
+ *		RSSI of RX PPDU on chain 1 of secondary 80 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain2_pri20
+ *		RSSI of RX PPDU on chain 2 of primary 20 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain2_sec20
+ *		RSSI of RX PPDU on chain 2 of secondary 20 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain2_sec40
+ *		RSSI of RX PPDU on chain 2 of secondary 40 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain2_sec80
+ *		RSSI of RX PPDU on chain 2 of secondary 80 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain3_pri20
+ *		RSSI of RX PPDU on chain 3 of primary 20 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain3_sec20
+ *		RSSI of RX PPDU on chain 3 of secondary 20 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain3_sec40
+ *		RSSI of RX PPDU on chain 3 of secondary 40 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_chain3_sec80
+ *		RSSI of RX PPDU on chain 3 of secondary 80 MHz bandwidth.
+ *		Value of 0x80 indicates invalid.
+ *
+ * rssi_comb
+ *		The combined RSSI of RX PPDU of all active chains and
+ *		bandwidths.  Value of 0x80 indicates invalid.
+ *
+ * reserved_4a
+ *		Reserved: HW should fill with 0, FW should ignore.
+ *
+ * is_greenfield
+ *		Do we really support this?
+ *
+ * reserved_4b
+ *		Reserved: HW should fill with 0, FW should ignore.
+ *
+ * l_sig_rate
+ *		If l_sig_rate_select is 0:
+ *		0x8: OFDM 48 Mbps
+ *		0x9: OFDM 24 Mbps
+ *		0xA: OFDM 12 Mbps
+ *		0xB: OFDM 6 Mbps
+ *		0xC: OFDM 54 Mbps
+ *		0xD: OFDM 36 Mbps
+ *		0xE: OFDM 18 Mbps
+ *		0xF: OFDM 9 Mbps
+ *		If l_sig_rate_select is 1:
+ *		0x8: CCK 11 Mbps long preamble
+ *		0x9: CCK 5.5 Mbps long preamble
+ *		0xA: CCK 2 Mbps long preamble
+ *		0xB: CCK 1 Mbps long preamble
+ *		0xC: CCK 11 Mbps short preamble
+ *		0xD: CCK 5.5 Mbps short preamble
+ *		0xE: CCK 2 Mbps short preamble
+ *
+ * l_sig_rate_select
+ *		Legacy signal rate select.  If set then l_sig_rate indicates
+ *		CCK rates.  If clear then l_sig_rate indicates OFDM rates.
+ *
+ * l_sig_length
+ *		Length of legacy frame in octets.
+ *
+ * l_sig_parity
+ *		Odd parity over l_sig_rate and l_sig_length
+ *
+ * l_sig_tail
+ *		Tail bits for Viterbi decoder
+ *
+ * preamble_type
+ *		Indicates the type of preamble ahead:
+ *		0x4: Legacy (OFDM/CCK)
+ *		0x8: HT
+ *		0x9: HT with TxBF
+ *		0xC: VHT
+ *		0xD: VHT with TxBF
+ *		0x80 - 0xFF: Reserved for special baseband data types such
+ *		as radar and spectral scan.
+ *
+ * ht_sig_vht_sig_a_1
+ *		If preamble_type == 0x8 or 0x9
+ *		HT-SIG (first 24 bits)
+ *		If preamble_type == 0xC or 0xD
+ *		VHT-SIG A (first 24 bits)
+ *		Else
+ *		Reserved
+ *
+ * reserved_6
+ *		Reserved: HW should fill with 0, FW should ignore.
+ *
+ * ht_sig_vht_sig_a_2
+ *		If preamble_type == 0x8 or 0x9
+ *		HT-SIG (last 24 bits)
+ *		If preamble_type == 0xC or 0xD
+ *		VHT-SIG A (last 24 bits)
+ *		Else
+ *		Reserved
+ *
+ * txbf_h_info
+ *		Indicates that the packet data carries H information which
+ *		is used for TxBF debug.
+ *
+ * reserved_7
+ *		Reserved: HW should fill with 0, FW should ignore.
+ *
+ * vht_sig_b
+ *		WiFi 1.0 and WiFi 2.0 will likely have this field to be all
+ *		0s since the BB does not plan on decoding VHT SIG-B.
+ *
+ * reserved_8
+ *		Reserved: HW should fill with 0, FW should ignore.
+ *
+ * service
+ *		Service field from BB for OFDM, HT and VHT packets.  CCK
+ *		packets will have service field of 0.
+ *
+ * reserved_9
+ *		Reserved: HW should fill with 0, FW should ignore.
+*/
+
+
+#define RX_PPDU_END_FLAGS_PHY_ERR             (1 << 0)
+#define RX_PPDU_END_FLAGS_RX_LOCATION         (1 << 1)
+#define RX_PPDU_END_FLAGS_TXBF_H_INFO         (1 << 2)
+
+#define RX_PPDU_END_INFO0_RX_ANTENNA_MASK     0x00ffffff
+#define RX_PPDU_END_INFO0_RX_ANTENNA_LSB      0
+#define RX_PPDU_END_INFO0_FLAGS_TX_HT_VHT_ACK (1 << 24)
+#define RX_PPDU_END_INFO0_BB_CAPTURED_CHANNEL (1 << 25)
+
+#define RX_PPDU_END_INFO1_PPDU_DONE (1 << 15)
+
+struct rx_ppdu_end {
+	__le32 evm_p0;
+	__le32 evm_p1;
+	__le32 evm_p2;
+	__le32 evm_p3;
+	__le32 evm_p4;
+	__le32 evm_p5;
+	__le32 evm_p6;
+	__le32 evm_p7;
+	__le32 evm_p8;
+	__le32 evm_p9;
+	__le32 evm_p10;
+	__le32 evm_p11;
+	__le32 evm_p12;
+	__le32 evm_p13;
+	__le32 evm_p14;
+	__le32 evm_p15;
+	__le32 tsf_timestamp;
+	__le32 wb_timestamp;
+	u8 locationing_timestamp;
+	u8 phy_err_code;
+	__le16 flags; /* %RX_PPDU_END_FLAGS_ */
+	__le32 info0; /* %RX_PPDU_END_INFO0_ */
+	__le16 bb_length;
+	__le16 info1; /* %RX_PPDU_END_INFO1_ */
+} __packed;
+
+/*
+ * evm_p0
+ *		EVM for pilot 0.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p1
+ *		EVM for pilot 1.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p2
+ *		EVM for pilot 2.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p3
+ *		EVM for pilot 3.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p4
+ *		EVM for pilot 4.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p5
+ *		EVM for pilot 5.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p6
+ *		EVM for pilot 6.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p7
+ *		EVM for pilot 7.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p8
+ *		EVM for pilot 8.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p9
+ *		EVM for pilot 9.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p10
+ *		EVM for pilot 10.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p11
+ *		EVM for pilot 11.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p12
+ *		EVM for pilot 12.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p13
+ *		EVM for pilot 13.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p14
+ *		EVM for pilot 14.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * evm_p15
+ *		EVM for pilot 15.  Contain EVM for streams: 0, 1, 2 and 3.
+ *
+ * tsf_timestamp
+ *		Receive TSF timestamp sampled on the rising edge of
+ *		rx_clear.  For PHY errors this may be the current TSF when
+ *		phy_error is asserted if the rx_clear does not assert before
+ *		the end of the PHY error.
+ *
+ * wb_timestamp
+ *		WLAN/BT timestamp is a 1 usec resolution timestamp which
+ *		does not get updated based on receive beacon like TSF.  The
+ *		same rules for capturing tsf_timestamp are used to capture
+ *		the wb_timestamp.
+ *
+ * locationing_timestamp
+ *		Timestamp used for locationing.  This timestamp is used to
+ *		indicate fractions of usec.  For example if the MAC clock is
+ *		running at 80 MHz, the timestamp will increment every 12.5
+ *		nsec.  The value starts at 0 and increments to 79 and
+ *		returns to 0 and repeats.  This information is valid for
+ *		every PPDU.  This information can be used in conjunction
+ *		with wb_timestamp to capture large delta times.
+ *
+ * phy_err_code
+ *		See the 1.10.8.1.2 for the list of the PHY error codes.
+ *
+ * phy_err
+ *		Indicates a PHY error was detected for this PPDU.
+ *
+ * rx_location
+ *		Indicates that location information was requested.
+ *
+ * txbf_h_info
+ *		Indicates that the packet data carries H information which
+ *		is used for TxBF debug.
+ *
+ * reserved_18
+ *		Reserved: HW should fill with 0, FW should ignore.
+ *
+ * rx_antenna
+ *		Receive antenna value
+ *
+ * tx_ht_vht_ack
+ *		Indicates that a HT or VHT Ack/BA frame was transmitted in
+ *		response to this receive packet.
+ *
+ * bb_captured_channel
+ *		Indicates that the BB has captured a channel dump.  FW can
+ *		then read the channel dump memory.  This may indicate that
+ *		the channel was captured either based on PCU setting the
+ *		capture_channel bit  BB descriptor or FW setting the
+ *		capture_channel mode bit.
+ *
+ * reserved_19
+ *		Reserved: HW should fill with 0, FW should ignore.
+ *
+ * bb_length
+ *		Indicates the number of bytes of baseband information for
+ *		PPDUs where the BB descriptor preamble type is 0x80 to 0xFF
+ *		which indicates that this is not a normal PPDU but rather
+ *		contains baseband debug information.
+ *
+ * reserved_20
+ *		Reserved: HW should fill with 0, FW should ignore.
+ *
+ * ppdu_done
+ *		PPDU end status is only valid when ppdu_done bit is set.
+ *		Every time HW sets this bit in memory FW/SW must clear this
+ *		bit in memory.  FW will initialize all the ppdu_done dword
+ *		to 0.
+*/
+
+#define FW_RX_DESC_INFO0_DISCARD  (1 << 0)
+#define FW_RX_DESC_INFO0_FORWARD  (1 << 1)
+#define FW_RX_DESC_INFO0_INSPECT  (1 << 5)
+#define FW_RX_DESC_INFO0_EXT_MASK 0xC0
+#define FW_RX_DESC_INFO0_EXT_LSB  6
+
+struct fw_rx_desc_base {
+	u8 info0;
+} __packed;
+
+#endif /* _RX_DESC_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/targaddrs.h b/drivers/net/wireless/ath/ath10k/targaddrs.h
new file mode 100644
index 000000000000..be7ba1e78afe
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/targaddrs.h
@@ -0,0 +1,449 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __TARGADDRS_H__
+#define __TARGADDRS_H__
+
+/*
+ * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
+ * host_interest structure.  It must match the address of the _host_interest
+ * symbol (see linker script).
+ *
+ * Host Interest is shared between Host and Target in order to coordinate
+ * between the two, and is intended to remain constant (with additions only
+ * at the end) across software releases.
+ *
+ * All addresses are available here so that it's possible to
+ * write a single binary that works with all Target Types.
+ * May be used in assembler code as well as C.
+ */
+#define QCA988X_HOST_INTEREST_ADDRESS    0x00400800
+#define HOST_INTEREST_MAX_SIZE          0x200
+
+/*
+ * These are items that the Host may need to access via BMI or via the
+ * Diagnostic Window. The position of items in this structure must remain
+ * constant across firmware revisions! Types for each item must be fixed
+ * size across target and host platforms. More items may be added at the end.
+ */
+struct host_interest {
+	/*
+	 * Pointer to application-defined area, if any.
+	 * Set by Target application during startup.
+	 */
+	u32 hi_app_host_interest;			/* 0x00 */
+
+	/* Pointer to register dump area, valid after Target crash. */
+	u32 hi_failure_state;				/* 0x04 */
+
+	/* Pointer to debug logging header */
+	u32 hi_dbglog_hdr;				/* 0x08 */
+
+	u32 hi_unused0c;				/* 0x0c */
+
+	/*
+	 * General-purpose flag bits, similar to SOC_OPTION_* flags.
+	 * Can be used by application rather than by OS.
+	 */
+	u32 hi_option_flag;				/* 0x10 */
+
+	/*
+	 * Boolean that determines whether or not to
+	 * display messages on the serial port.
+	 */
+	u32 hi_serial_enable;				/* 0x14 */
+
+	/* Start address of DataSet index, if any */
+	u32 hi_dset_list_head;				/* 0x18 */
+
+	/* Override Target application start address */
+	u32 hi_app_start;				/* 0x1c */
+
+	/* Clock and voltage tuning */
+	u32 hi_skip_clock_init;				/* 0x20 */
+	u32 hi_core_clock_setting;			/* 0x24 */
+	u32 hi_cpu_clock_setting;			/* 0x28 */
+	u32 hi_system_sleep_setting;			/* 0x2c */
+	u32 hi_xtal_control_setting;			/* 0x30 */
+	u32 hi_pll_ctrl_setting_24ghz;			/* 0x34 */
+	u32 hi_pll_ctrl_setting_5ghz;			/* 0x38 */
+	u32 hi_ref_voltage_trim_setting;		/* 0x3c */
+	u32 hi_clock_info;				/* 0x40 */
+
+	/* Host uses BE CPU or not */
+	u32 hi_be;					/* 0x44 */
+
+	u32 hi_stack;	/* normal stack */			/* 0x48 */
+	u32 hi_err_stack; /* error stack */		/* 0x4c */
+	u32 hi_desired_cpu_speed_hz;			/* 0x50 */
+
+	/* Pointer to Board Data  */
+	u32 hi_board_data;				/* 0x54 */
+
+	/*
+	 * Indication of Board Data state:
+	 *    0: board data is not yet initialized.
+	 *    1: board data is initialized; unknown size
+	 *   >1: number of bytes of initialized board data
+	 */
+	u32 hi_board_data_initialized;			/* 0x58 */
+
+	u32 hi_dset_ram_index_table;			/* 0x5c */
+
+	u32 hi_desired_baud_rate;			/* 0x60 */
+	u32 hi_dbglog_config;				/* 0x64 */
+	u32 hi_end_ram_reserve_sz;			/* 0x68 */
+	u32 hi_mbox_io_block_sz;			/* 0x6c */
+
+	u32 hi_num_bpatch_streams;			/* 0x70 -- unused */
+	u32 hi_mbox_isr_yield_limit;			/* 0x74 */
+
+	u32 hi_refclk_hz;				/* 0x78 */
+	u32 hi_ext_clk_detected;			/* 0x7c */
+	u32 hi_dbg_uart_txpin;				/* 0x80 */
+	u32 hi_dbg_uart_rxpin;				/* 0x84 */
+	u32 hi_hci_uart_baud;				/* 0x88 */
+	u32 hi_hci_uart_pin_assignments;		/* 0x8C */
+
+	u32 hi_hci_uart_baud_scale_val;			/* 0x90 */
+	u32 hi_hci_uart_baud_step_val;			/* 0x94 */
+
+	u32 hi_allocram_start;				/* 0x98 */
+	u32 hi_allocram_sz;				/* 0x9c */
+	u32 hi_hci_bridge_flags;			/* 0xa0 */
+	u32 hi_hci_uart_support_pins;			/* 0xa4 */
+
+	u32 hi_hci_uart_pwr_mgmt_params;		/* 0xa8 */
+
+	/*
+	 * 0xa8 - [1]: 0 = UART FC active low, 1 = UART FC active high
+	 *        [31:16]: wakeup timeout in ms
+	 */
+	/* Pointer to extended board Data  */
+	u32 hi_board_ext_data;				/* 0xac */
+	u32 hi_board_ext_data_config;			/* 0xb0 */
+	/*
+	 * Bit [0]  :   valid
+	 * Bit[31:16:   size
+	 */
+	/*
+	 * hi_reset_flag is used to do some stuff when target reset.
+	 * such as restore app_start after warm reset or
+	 * preserve host Interest area, or preserve ROM data, literals etc.
+	 */
+	u32  hi_reset_flag;				/* 0xb4 */
+	/* indicate hi_reset_flag is valid */
+	u32  hi_reset_flag_valid;			/* 0xb8 */
+	u32 hi_hci_uart_pwr_mgmt_params_ext;		/* 0xbc */
+	/* 0xbc - [31:0]: idle timeout in ms */
+	/* ACS flags */
+	u32 hi_acs_flags;				/* 0xc0 */
+	u32 hi_console_flags;				/* 0xc4 */
+	u32 hi_nvram_state;				/* 0xc8 */
+	u32 hi_option_flag2;				/* 0xcc */
+
+	/* If non-zero, override values sent to Host in WMI_READY event. */
+	u32 hi_sw_version_override;			/* 0xd0 */
+	u32 hi_abi_version_override;			/* 0xd4 */
+
+	/*
+	 * Percentage of high priority RX traffic to total expected RX traffic
+	 * applicable only to ar6004
+	 */
+	u32 hi_hp_rx_traffic_ratio;			/* 0xd8 */
+
+	/* test applications flags */
+	u32 hi_test_apps_related;			/* 0xdc */
+	/* location of test script */
+	u32 hi_ota_testscript;				/* 0xe0 */
+	/* location of CAL data */
+	u32 hi_cal_data;				/* 0xe4 */
+
+	/* Number of packet log buffers */
+	u32 hi_pktlog_num_buffers;			/* 0xe8 */
+
+	/* wow extension configuration */
+	u32 hi_wow_ext_config;				/* 0xec */
+	u32 hi_pwr_save_flags;				/* 0xf0 */
+
+	/* Spatial Multiplexing Power Save (SMPS) options */
+	u32 hi_smps_options;				/* 0xf4 */
+
+	/* Interconnect-specific state */
+	u32 hi_interconnect_state;			/* 0xf8 */
+
+	/* Coex configuration flags */
+	u32 hi_coex_config;				/* 0xfc */
+
+	/* Early allocation support */
+	u32 hi_early_alloc;				/* 0x100 */
+	/* FW swap field */
+	/*
+	 * Bits of this 32bit word will be used to pass specific swap
+	 * instruction to FW
+	 */
+	/*
+	 * Bit 0 -- AP Nart descriptor no swap. When this bit is set
+	 * FW will not swap TX descriptor. Meaning packets are formed
+	 * on the target processor.
+	 */
+	/* Bit 1 - unused */
+	u32 hi_fw_swap;					/* 0x104 */
+} __packed;
+
+#define HI_ITEM(item)  offsetof(struct host_interest, item)
+
+/* Bits defined in hi_option_flag */
+
+/* Enable timer workaround */
+#define HI_OPTION_TIMER_WAR         0x01
+/* Limit BMI command credits */
+#define HI_OPTION_BMI_CRED_LIMIT    0x02
+/* Relay Dot11 hdr to/from host */
+#define HI_OPTION_RELAY_DOT11_HDR   0x04
+/* MAC addr method 0-locally administred 1-globally unique addrs */
+#define HI_OPTION_MAC_ADDR_METHOD   0x08
+/* Firmware Bridging */
+#define HI_OPTION_FW_BRIDGE         0x10
+/* Enable CPU profiling */
+#define HI_OPTION_ENABLE_PROFILE    0x20
+/* Disable debug logging */
+#define HI_OPTION_DISABLE_DBGLOG    0x40
+/* Skip Era Tracking */
+#define HI_OPTION_SKIP_ERA_TRACKING 0x80
+/* Disable PAPRD (debug) */
+#define HI_OPTION_PAPRD_DISABLE     0x100
+#define HI_OPTION_NUM_DEV_LSB       0x200
+#define HI_OPTION_NUM_DEV_MSB       0x800
+#define HI_OPTION_DEV_MODE_LSB      0x1000
+#define HI_OPTION_DEV_MODE_MSB      0x8000000
+/* Disable LowFreq Timer Stabilization */
+#define HI_OPTION_NO_LFT_STBL       0x10000000
+/* Skip regulatory scan */
+#define HI_OPTION_SKIP_REG_SCAN     0x20000000
+/*
+ * Do regulatory scan during init before
+ * sending WMI ready event to host
+ */
+#define HI_OPTION_INIT_REG_SCAN     0x40000000
+
+/* REV6: Do not adjust memory map */
+#define HI_OPTION_SKIP_MEMMAP       0x80000000
+
+#define HI_OPTION_MAC_ADDR_METHOD_SHIFT 3
+
+/* 2 bits of hi_option_flag are used to represent 3 modes */
+#define HI_OPTION_FW_MODE_IBSS    0x0 /* IBSS Mode */
+#define HI_OPTION_FW_MODE_BSS_STA 0x1 /* STA Mode */
+#define HI_OPTION_FW_MODE_AP      0x2 /* AP Mode */
+#define HI_OPTION_FW_MODE_BT30AMP 0x3 /* BT30 AMP Mode */
+
+/* 2 bits of hi_option flag are usedto represent 4 submodes */
+#define HI_OPTION_FW_SUBMODE_NONE    0x0  /* Normal mode */
+#define HI_OPTION_FW_SUBMODE_P2PDEV  0x1  /* p2p device mode */
+#define HI_OPTION_FW_SUBMODE_P2PCLIENT 0x2 /* p2p client mode */
+#define HI_OPTION_FW_SUBMODE_P2PGO   0x3 /* p2p go mode */
+
+/* Num dev Mask */
+#define HI_OPTION_NUM_DEV_MASK    0x7
+#define HI_OPTION_NUM_DEV_SHIFT   0x9
+
+/* firmware bridging */
+#define HI_OPTION_FW_BRIDGE_SHIFT 0x04
+
+/*
+Fw Mode/SubMode Mask
+|-----------------------------------------------------------------------------|
+|  SUB   |   SUB   |   SUB   |  SUB    |         |         |         |        |
+|MODE[3] | MODE[2] | MODE[1] | MODE[0] | MODE[3] | MODE[2] | MODE[1] | MODE[0]|
+|  (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)  |
+|-----------------------------------------------------------------------------|
+*/
+#define HI_OPTION_FW_MODE_BITS         0x2
+#define HI_OPTION_FW_MODE_MASK         0x3
+#define HI_OPTION_FW_MODE_SHIFT        0xC
+#define HI_OPTION_ALL_FW_MODE_MASK     0xFF
+
+#define HI_OPTION_FW_SUBMODE_BITS      0x2
+#define HI_OPTION_FW_SUBMODE_MASK      0x3
+#define HI_OPTION_FW_SUBMODE_SHIFT     0x14
+#define HI_OPTION_ALL_FW_SUBMODE_MASK  0xFF00
+#define HI_OPTION_ALL_FW_SUBMODE_SHIFT 0x8
+
+
+/* hi_option_flag2 options */
+#define HI_OPTION_OFFLOAD_AMSDU     0x01
+#define HI_OPTION_DFS_SUPPORT       0x02 /* Enable DFS support */
+#define HI_OPTION_ENABLE_RFKILL     0x04 /* RFKill Enable Feature*/
+#define HI_OPTION_RADIO_RETENTION_DISABLE 0x08 /* Disable radio retention */
+#define HI_OPTION_EARLY_CFG_DONE    0x10 /* Early configuration is complete */
+
+#define HI_OPTION_RF_KILL_SHIFT     0x2
+#define HI_OPTION_RF_KILL_MASK      0x1
+
+/* hi_reset_flag */
+/* preserve App Start address */
+#define HI_RESET_FLAG_PRESERVE_APP_START         0x01
+/* preserve host interest */
+#define HI_RESET_FLAG_PRESERVE_HOST_INTEREST     0x02
+/* preserve ROM data */
+#define HI_RESET_FLAG_PRESERVE_ROMDATA           0x04
+#define HI_RESET_FLAG_PRESERVE_NVRAM_STATE       0x08
+#define HI_RESET_FLAG_PRESERVE_BOOT_INFO         0x10
+#define HI_RESET_FLAG_WARM_RESET	0x20
+
+/* define hi_fw_swap bits */
+#define HI_DESC_IN_FW_BIT	0x01
+
+/* indicate the reset flag is valid */
+#define HI_RESET_FLAG_IS_VALID  0x12345678
+
+/* ACS is enabled */
+#define HI_ACS_FLAGS_ENABLED        (1 << 0)
+/* Use physical WWAN device */
+#define HI_ACS_FLAGS_USE_WWAN       (1 << 1)
+/* Use test VAP */
+#define HI_ACS_FLAGS_TEST_VAP       (1 << 2)
+
+/*
+ * CONSOLE FLAGS
+ *
+ * Bit Range  Meaning
+ * ---------  --------------------------------
+ *   2..0     UART ID (0 = Default)
+ *    3       Baud Select (0 = 9600, 1 = 115200)
+ *   30..4    Reserved
+ *    31      Enable Console
+ *
+ */
+
+#define HI_CONSOLE_FLAGS_ENABLE       (1 << 31)
+#define HI_CONSOLE_FLAGS_UART_MASK    (0x7)
+#define HI_CONSOLE_FLAGS_UART_SHIFT   0
+#define HI_CONSOLE_FLAGS_BAUD_SELECT  (1 << 3)
+
+/* SM power save options */
+#define HI_SMPS_ALLOW_MASK            (0x00000001)
+#define HI_SMPS_MODE_MASK             (0x00000002)
+#define HI_SMPS_MODE_STATIC           (0x00000000)
+#define HI_SMPS_MODE_DYNAMIC          (0x00000002)
+#define HI_SMPS_DISABLE_AUTO_MODE     (0x00000004)
+#define HI_SMPS_DATA_THRESH_MASK      (0x000007f8)
+#define HI_SMPS_DATA_THRESH_SHIFT     (3)
+#define HI_SMPS_RSSI_THRESH_MASK      (0x0007f800)
+#define HI_SMPS_RSSI_THRESH_SHIFT     (11)
+#define HI_SMPS_LOWPWR_CM_MASK        (0x00380000)
+#define HI_SMPS_LOWPWR_CM_SHIFT       (15)
+#define HI_SMPS_HIPWR_CM_MASK         (0x03c00000)
+#define HI_SMPS_HIPWR_CM_SHIFT        (19)
+
+/*
+ * WOW Extension configuration
+ *
+ * Bit Range  Meaning
+ * ---------  --------------------------------
+ *   8..0     Size of each WOW pattern (max 511)
+ *   15..9    Number of patterns per list (max 127)
+ *   17..16   Number of lists (max 4)
+ *   30..18   Reserved
+ *   31       Enabled
+ *
+ *  set values (except enable) to zeros for default settings
+ */
+
+#define HI_WOW_EXT_ENABLED_MASK        (1 << 31)
+#define HI_WOW_EXT_NUM_LIST_SHIFT      16
+#define HI_WOW_EXT_NUM_LIST_MASK       (0x3 << HI_WOW_EXT_NUM_LIST_SHIFT)
+#define HI_WOW_EXT_NUM_PATTERNS_SHIFT  9
+#define HI_WOW_EXT_NUM_PATTERNS_MASK   (0x7F << HI_WOW_EXT_NUM_PATTERNS_SHIFT)
+#define HI_WOW_EXT_PATTERN_SIZE_SHIFT  0
+#define HI_WOW_EXT_PATTERN_SIZE_MASK   (0x1FF << HI_WOW_EXT_PATTERN_SIZE_SHIFT)
+
+#define HI_WOW_EXT_MAKE_CONFIG(num_lists, count, size) \
+	((((num_lists) << HI_WOW_EXT_NUM_LIST_SHIFT) & \
+		HI_WOW_EXT_NUM_LIST_MASK) | \
+	(((count) << HI_WOW_EXT_NUM_PATTERNS_SHIFT) & \
+		HI_WOW_EXT_NUM_PATTERNS_MASK) | \
+	(((size) << HI_WOW_EXT_PATTERN_SIZE_SHIFT) & \
+		HI_WOW_EXT_PATTERN_SIZE_MASK))
+
+#define HI_WOW_EXT_GET_NUM_LISTS(config) \
+	(((config) & HI_WOW_EXT_NUM_LIST_MASK) >> HI_WOW_EXT_NUM_LIST_SHIFT)
+#define HI_WOW_EXT_GET_NUM_PATTERNS(config) \
+	(((config) & HI_WOW_EXT_NUM_PATTERNS_MASK) >> \
+		HI_WOW_EXT_NUM_PATTERNS_SHIFT)
+#define HI_WOW_EXT_GET_PATTERN_SIZE(config) \
+	(((config) & HI_WOW_EXT_PATTERN_SIZE_MASK) >> \
+		HI_WOW_EXT_PATTERN_SIZE_SHIFT)
+
+/*
+ * Early allocation configuration
+ * Support RAM bank configuration before BMI done and this eases the memory
+ * allocation at very early stage
+ * Bit Range  Meaning
+ * ---------  ----------------------------------
+ * [0:3]      number of bank assigned to be IRAM
+ * [4:15]     reserved
+ * [16:31]    magic number
+ *
+ * Note:
+ * 1. target firmware would check magic number and if it's a match, firmware
+ *    would consider the bits[0:15] are valid and base on that to calculate
+ *    the end of DRAM. Early allocation would be located at that area and
+ *    may be reclaimed when necesary
+ * 2. if no magic number is found, early allocation would happen at "_end"
+ *    symbol of ROM which is located before the app-data and might NOT be
+ *    re-claimable. If this is adopted, link script should keep this in
+ *    mind to avoid data corruption.
+ */
+#define HI_EARLY_ALLOC_MAGIC		0x6d8a
+#define HI_EARLY_ALLOC_MAGIC_MASK	0xffff0000
+#define HI_EARLY_ALLOC_MAGIC_SHIFT	16
+#define HI_EARLY_ALLOC_IRAM_BANKS_MASK	0x0000000f
+#define HI_EARLY_ALLOC_IRAM_BANKS_SHIFT	0
+
+#define HI_EARLY_ALLOC_VALID() \
+	((((HOST_INTEREST->hi_early_alloc) & HI_EARLY_ALLOC_MAGIC_MASK) >> \
+	HI_EARLY_ALLOC_MAGIC_SHIFT) == (HI_EARLY_ALLOC_MAGIC))
+#define HI_EARLY_ALLOC_GET_IRAM_BANKS() \
+	(((HOST_INTEREST->hi_early_alloc) & HI_EARLY_ALLOC_IRAM_BANKS_MASK) \
+	>> HI_EARLY_ALLOC_IRAM_BANKS_SHIFT)
+
+/*power save flag bit definitions*/
+#define HI_PWR_SAVE_LPL_ENABLED   0x1
+/*b1-b3 reserved*/
+/*b4-b5 : dev0 LPL type : 0 - none
+			  1- Reduce Pwr Search
+			  2- Reduce Pwr Listen*/
+/*b6-b7 : dev1 LPL type and so on for Max 8 devices*/
+#define HI_PWR_SAVE_LPL_DEV0_LSB   4
+#define HI_PWR_SAVE_LPL_DEV_MASK   0x3
+/*power save related utility macros*/
+#define HI_LPL_ENABLED() \
+	((HOST_INTEREST->hi_pwr_save_flags & HI_PWR_SAVE_LPL_ENABLED))
+#define HI_DEV_LPL_TYPE_GET(_devix) \
+	(HOST_INTEREST->hi_pwr_save_flags & ((HI_PWR_SAVE_LPL_DEV_MASK) << \
+	 (HI_PWR_SAVE_LPL_DEV0_LSB + (_devix)*2)))
+
+#define HOST_INTEREST_SMPS_IS_ALLOWED() \
+	((HOST_INTEREST->hi_smps_options & HI_SMPS_ALLOW_MASK))
+
+/* Reserve 1024 bytes for extended board data */
+#define QCA988X_BOARD_DATA_SZ     7168
+#define QCA988X_BOARD_EXT_DATA_SZ 0
+
+#endif /* __TARGADDRS_H__ */
diff --git a/drivers/net/wireless/ath/ath10k/trace.c b/drivers/net/wireless/ath/ath10k/trace.c
new file mode 100644
index 000000000000..4a31e2c6fbd4
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/trace.c
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"
diff --git a/drivers/net/wireless/ath/ath10k/trace.h b/drivers/net/wireless/ath/ath10k/trace.h
new file mode 100644
index 000000000000..85e806bf7257
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/trace.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#if !defined(_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+
+#include <linux/tracepoint.h>
+
+#define _TRACE_H_
+
+/* create empty functions when tracing is disabled */
+#if !defined(CONFIG_ATH10K_TRACING)
+#undef TRACE_EVENT
+#define TRACE_EVENT(name, proto, ...) \
+static inline void trace_ ## name(proto) {}
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(...)
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(evt_class, name, proto, ...) \
+static inline void trace_ ## name(proto) {}
+#endif /* !CONFIG_ATH10K_TRACING || __CHECKER__ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM ath10k
+
+#define ATH10K_MSG_MAX 200
+
+DECLARE_EVENT_CLASS(ath10k_log_event,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf),
+	TP_STRUCT__entry(
+		__dynamic_array(char, msg, ATH10K_MSG_MAX)
+	),
+	TP_fast_assign(
+		WARN_ON_ONCE(vsnprintf(__get_dynamic_array(msg),
+				       ATH10K_MSG_MAX,
+				       vaf->fmt,
+				       *vaf->va) >= ATH10K_MSG_MAX);
+	),
+	TP_printk("%s", __get_str(msg))
+);
+
+DEFINE_EVENT(ath10k_log_event, ath10k_log_err,
+	     TP_PROTO(struct va_format *vaf),
+	     TP_ARGS(vaf)
+);
+
+DEFINE_EVENT(ath10k_log_event, ath10k_log_warn,
+	     TP_PROTO(struct va_format *vaf),
+	     TP_ARGS(vaf)
+);
+
+DEFINE_EVENT(ath10k_log_event, ath10k_log_info,
+	     TP_PROTO(struct va_format *vaf),
+	     TP_ARGS(vaf)
+);
+
+TRACE_EVENT(ath10k_log_dbg,
+	TP_PROTO(unsigned int level, struct va_format *vaf),
+	TP_ARGS(level, vaf),
+	TP_STRUCT__entry(
+		__field(unsigned int, level)
+		__dynamic_array(char, msg, ATH10K_MSG_MAX)
+	),
+	TP_fast_assign(
+		__entry->level = level;
+		WARN_ON_ONCE(vsnprintf(__get_dynamic_array(msg),
+				       ATH10K_MSG_MAX,
+				       vaf->fmt,
+				       *vaf->va) >= ATH10K_MSG_MAX);
+	),
+	TP_printk("%s", __get_str(msg))
+);
+
+TRACE_EVENT(ath10k_log_dbg_dump,
+	TP_PROTO(const char *msg, const char *prefix,
+		 const void *buf, size_t buf_len),
+
+	TP_ARGS(msg, prefix, buf, buf_len),
+
+	TP_STRUCT__entry(
+		__string(msg, msg)
+		__string(prefix, prefix)
+		__field(size_t, buf_len)
+		__dynamic_array(u8, buf, buf_len)
+	),
+
+	TP_fast_assign(
+		__assign_str(msg, msg);
+		__assign_str(prefix, prefix);
+		__entry->buf_len = buf_len;
+		memcpy(__get_dynamic_array(buf), buf, buf_len);
+	),
+
+	TP_printk(
+		"%s/%s\n", __get_str(prefix), __get_str(msg)
+	)
+);
+
+TRACE_EVENT(ath10k_wmi_cmd,
+	TP_PROTO(int id, void *buf, size_t buf_len),
+
+	TP_ARGS(id, buf, buf_len),
+
+	TP_STRUCT__entry(
+		__field(unsigned int, id)
+		__field(size_t, buf_len)
+		__dynamic_array(u8, buf, buf_len)
+	),
+
+	TP_fast_assign(
+		__entry->id = id;
+		__entry->buf_len = buf_len;
+		memcpy(__get_dynamic_array(buf), buf, buf_len);
+	),
+
+	TP_printk(
+		"id %d len %zu",
+		__entry->id,
+		__entry->buf_len
+	)
+);
+
+TRACE_EVENT(ath10k_wmi_event,
+	TP_PROTO(int id, void *buf, size_t buf_len),
+
+	TP_ARGS(id, buf, buf_len),
+
+	TP_STRUCT__entry(
+		__field(unsigned int, id)
+		__field(size_t, buf_len)
+		__dynamic_array(u8, buf, buf_len)
+	),
+
+	TP_fast_assign(
+		__entry->id = id;
+		__entry->buf_len = buf_len;
+		memcpy(__get_dynamic_array(buf), buf, buf_len);
+	),
+
+	TP_printk(
+		"id %d len %zu",
+		__entry->id,
+		__entry->buf_len
+	)
+);
+
+#endif /* _TRACE_H_ || TRACE_HEADER_MULTI_READ*/
+
+/* we don't want to use include/trace/events */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
new file mode 100644
index 000000000000..68b6faefd1d8
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -0,0 +1,417 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "core.h"
+#include "txrx.h"
+#include "htt.h"
+#include "mac.h"
+#include "debug.h"
+
+static void ath10k_report_offchan_tx(struct ath10k *ar, struct sk_buff *skb)
+{
+	if (!ATH10K_SKB_CB(skb)->htt.is_offchan)
+		return;
+
+	/* If the original wait_for_completion() timed out before
+	 * {data,mgmt}_tx_completed() was called then we could complete
+	 * offchan_tx_completed for a different skb. Prevent this by using
+	 * offchan_tx_skb. */
+	spin_lock_bh(&ar->data_lock);
+	if (ar->offchan_tx_skb != skb) {
+		ath10k_warn("completed old offchannel frame\n");
+		goto out;
+	}
+
+	complete(&ar->offchan_tx_completed);
+	ar->offchan_tx_skb = NULL; /* just for sanity */
+
+	ath10k_dbg(ATH10K_DBG_HTT, "completed offchannel skb %p\n", skb);
+out:
+	spin_unlock_bh(&ar->data_lock);
+}
+
+void ath10k_txrx_tx_unref(struct ath10k_htt *htt, struct sk_buff *txdesc)
+{
+	struct device *dev = htt->ar->dev;
+	struct ieee80211_tx_info *info;
+	struct sk_buff *txfrag = ATH10K_SKB_CB(txdesc)->htt.txfrag;
+	struct sk_buff *msdu = ATH10K_SKB_CB(txdesc)->htt.msdu;
+	int ret;
+
+	if (ATH10K_SKB_CB(txdesc)->htt.refcount == 0)
+		return;
+
+	ATH10K_SKB_CB(txdesc)->htt.refcount--;
+
+	if (ATH10K_SKB_CB(txdesc)->htt.refcount > 0)
+		return;
+
+	if (txfrag) {
+		ret = ath10k_skb_unmap(dev, txfrag);
+		if (ret)
+			ath10k_warn("txfrag unmap failed (%d)\n", ret);
+
+		dev_kfree_skb_any(txfrag);
+	}
+
+	ret = ath10k_skb_unmap(dev, msdu);
+	if (ret)
+		ath10k_warn("data skb unmap failed (%d)\n", ret);
+
+	ath10k_report_offchan_tx(htt->ar, msdu);
+
+	info = IEEE80211_SKB_CB(msdu);
+	memset(&info->status, 0, sizeof(info->status));
+
+	if (ATH10K_SKB_CB(txdesc)->htt.discard) {
+		ieee80211_free_txskb(htt->ar->hw, msdu);
+		goto exit;
+	}
+
+	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
+		info->flags |= IEEE80211_TX_STAT_ACK;
+
+	if (ATH10K_SKB_CB(txdesc)->htt.no_ack)
+		info->flags &= ~IEEE80211_TX_STAT_ACK;
+
+	ieee80211_tx_status(htt->ar->hw, msdu);
+	/* we do not own the msdu anymore */
+
+exit:
+	spin_lock_bh(&htt->tx_lock);
+	htt->pending_tx[ATH10K_SKB_CB(txdesc)->htt.msdu_id] = NULL;
+	ath10k_htt_tx_free_msdu_id(htt, ATH10K_SKB_CB(txdesc)->htt.msdu_id);
+	__ath10k_htt_tx_dec_pending(htt);
+	if (bitmap_empty(htt->used_msdu_ids, htt->max_num_pending_tx))
+		wake_up(&htt->empty_tx_wq);
+	spin_unlock_bh(&htt->tx_lock);
+
+	dev_kfree_skb_any(txdesc);
+}
+
+void ath10k_txrx_tx_completed(struct ath10k_htt *htt,
+			      const struct htt_tx_done *tx_done)
+{
+	struct sk_buff *txdesc;
+
+	ath10k_dbg(ATH10K_DBG_HTT, "htt tx completion msdu_id %u discard %d no_ack %d\n",
+		   tx_done->msdu_id, !!tx_done->discard, !!tx_done->no_ack);
+
+	if (tx_done->msdu_id >= htt->max_num_pending_tx) {
+		ath10k_warn("warning: msdu_id %d too big, ignoring\n",
+			    tx_done->msdu_id);
+		return;
+	}
+
+	txdesc = htt->pending_tx[tx_done->msdu_id];
+
+	ATH10K_SKB_CB(txdesc)->htt.discard = tx_done->discard;
+	ATH10K_SKB_CB(txdesc)->htt.no_ack = tx_done->no_ack;
+
+	ath10k_txrx_tx_unref(htt, txdesc);
+}
+
+static const u8 rx_legacy_rate_idx[] = {
+	3,	/* 0x00  - 11Mbps  */
+	2,	/* 0x01  - 5.5Mbps */
+	1,	/* 0x02  - 2Mbps   */
+	0,	/* 0x03  - 1Mbps   */
+	3,	/* 0x04  - 11Mbps  */
+	2,	/* 0x05  - 5.5Mbps */
+	1,	/* 0x06  - 2Mbps   */
+	0,	/* 0x07  - 1Mbps   */
+	10,	/* 0x08  - 48Mbps  */
+	8,	/* 0x09  - 24Mbps  */
+	6,	/* 0x0A  - 12Mbps  */
+	4,	/* 0x0B  - 6Mbps   */
+	11,	/* 0x0C  - 54Mbps  */
+	9,	/* 0x0D  - 36Mbps  */
+	7,	/* 0x0E  - 18Mbps  */
+	5,	/* 0x0F  - 9Mbps   */
+};
+
+static void process_rx_rates(struct ath10k *ar, struct htt_rx_info *info,
+			     enum ieee80211_band band,
+			     struct ieee80211_rx_status *status)
+{
+	u8 cck, rate, rate_idx, bw, sgi, mcs, nss;
+	u8 info0 = info->rate.info0;
+	u32 info1 = info->rate.info1;
+	u32 info2 = info->rate.info2;
+	u8 preamble = 0;
+
+	/* Check if valid fields */
+	if (!(info0 & HTT_RX_INDICATION_INFO0_START_VALID))
+		return;
+
+	preamble = MS(info1, HTT_RX_INDICATION_INFO1_PREAMBLE_TYPE);
+
+	switch (preamble) {
+	case HTT_RX_LEGACY:
+		cck = info0 & HTT_RX_INDICATION_INFO0_LEGACY_RATE_CCK;
+		rate = MS(info0, HTT_RX_INDICATION_INFO0_LEGACY_RATE);
+		rate_idx = 0;
+
+		if (rate < 0x08 || rate > 0x0F)
+			break;
+
+		switch (band) {
+		case IEEE80211_BAND_2GHZ:
+			if (cck)
+				rate &= ~BIT(3);
+			rate_idx = rx_legacy_rate_idx[rate];
+			break;
+		case IEEE80211_BAND_5GHZ:
+			rate_idx = rx_legacy_rate_idx[rate];
+			/* We are using same rate table registering
+			   HW - ath10k_rates[]. In case of 5GHz skip
+			   CCK rates, so -4 here */
+			rate_idx -= 4;
+			break;
+		default:
+			break;
+		}
+
+		status->rate_idx = rate_idx;
+		break;
+	case HTT_RX_HT:
+	case HTT_RX_HT_WITH_TXBF:
+		/* HT-SIG - Table 20-11 in info1 and info2 */
+		mcs = info1 & 0x1F;
+		nss = mcs >> 3;
+		bw = (info1 >> 7) & 1;
+		sgi = (info2 >> 7) & 1;
+
+		status->rate_idx = mcs;
+		status->flag |= RX_FLAG_HT;
+		if (sgi)
+			status->flag |= RX_FLAG_SHORT_GI;
+		if (bw)
+			status->flag |= RX_FLAG_40MHZ;
+		break;
+	case HTT_RX_VHT:
+	case HTT_RX_VHT_WITH_TXBF:
+		/* VHT-SIG-A1 in info 1, VHT-SIG-A2 in info2
+		   TODO check this */
+		mcs = (info2 >> 4) & 0x0F;
+		nss = (info1 >> 10) & 0x07;
+		bw = info1 & 3;
+		sgi = info2 & 1;
+
+		status->rate_idx = mcs;
+		status->vht_nss = nss;
+
+		if (sgi)
+			status->flag |= RX_FLAG_SHORT_GI;
+
+		switch (bw) {
+		/* 20MHZ */
+		case 0:
+			break;
+		/* 40MHZ */
+		case 1:
+			status->flag |= RX_FLAG_40MHZ;
+			break;
+		/* 80MHZ */
+		case 2:
+			status->flag |= RX_FLAG_80MHZ;
+		}
+
+		status->flag |= RX_FLAG_VHT;
+		break;
+	default:
+		break;
+	}
+}
+
+void ath10k_process_rx(struct ath10k *ar, struct htt_rx_info *info)
+{
+	struct ieee80211_rx_status *status;
+	struct ieee80211_channel *ch;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)info->skb->data;
+
+	status = IEEE80211_SKB_RXCB(info->skb);
+	memset(status, 0, sizeof(*status));
+
+	if (info->encrypt_type != HTT_RX_MPDU_ENCRYPT_NONE) {
+		status->flag |= RX_FLAG_DECRYPTED | RX_FLAG_IV_STRIPPED |
+				RX_FLAG_MMIC_STRIPPED;
+		hdr->frame_control = __cpu_to_le16(
+				__le16_to_cpu(hdr->frame_control) &
+				~IEEE80211_FCTL_PROTECTED);
+	}
+
+	if (info->status == HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR)
+		status->flag |= RX_FLAG_MMIC_ERROR;
+
+	if (info->fcs_err)
+		status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+	status->signal = info->signal;
+
+	spin_lock_bh(&ar->data_lock);
+	ch = ar->scan_channel;
+	if (!ch)
+		ch = ar->rx_channel;
+	spin_unlock_bh(&ar->data_lock);
+
+	if (!ch) {
+		ath10k_warn("no channel configured; ignoring frame!\n");
+		dev_kfree_skb_any(info->skb);
+		return;
+	}
+
+	process_rx_rates(ar, info, ch->band, status);
+	status->band = ch->band;
+	status->freq = ch->center_freq;
+
+	ath10k_dbg(ATH10K_DBG_DATA,
+		   "rx skb %p len %u %s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u\n",
+		   info->skb,
+		   info->skb->len,
+		   status->flag == 0 ? "legacy" : "",
+		   status->flag & RX_FLAG_HT ? "ht" : "",
+		   status->flag & RX_FLAG_VHT ? "vht" : "",
+		   status->flag & RX_FLAG_40MHZ ? "40" : "",
+		   status->flag & RX_FLAG_80MHZ ? "80" : "",
+		   status->flag & RX_FLAG_SHORT_GI ? "sgi " : "",
+		   status->rate_idx,
+		   status->vht_nss,
+		   status->freq,
+		   status->band);
+
+	ieee80211_rx(ar->hw, info->skb);
+}
+
+struct ath10k_peer *ath10k_peer_find(struct ath10k *ar, int vdev_id,
+				     const u8 *addr)
+{
+	struct ath10k_peer *peer;
+
+	lockdep_assert_held(&ar->data_lock);
+
+	list_for_each_entry(peer, &ar->peers, list) {
+		if (peer->vdev_id != vdev_id)
+			continue;
+		if (memcmp(peer->addr, addr, ETH_ALEN))
+			continue;
+
+		return peer;
+	}
+
+	return NULL;
+}
+
+static struct ath10k_peer *ath10k_peer_find_by_id(struct ath10k *ar,
+						  int peer_id)
+{
+	struct ath10k_peer *peer;
+
+	lockdep_assert_held(&ar->data_lock);
+
+	list_for_each_entry(peer, &ar->peers, list)
+		if (test_bit(peer_id, peer->peer_ids))
+			return peer;
+
+	return NULL;
+}
+
+static int ath10k_wait_for_peer_common(struct ath10k *ar, int vdev_id,
+				       const u8 *addr, bool expect_mapped)
+{
+	int ret;
+
+	ret = wait_event_timeout(ar->peer_mapping_wq, ({
+			bool mapped;
+
+			spin_lock_bh(&ar->data_lock);
+			mapped = !!ath10k_peer_find(ar, vdev_id, addr);
+			spin_unlock_bh(&ar->data_lock);
+
+			mapped == expect_mapped;
+		}), 3*HZ);
+
+	if (ret <= 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+int ath10k_wait_for_peer_created(struct ath10k *ar, int vdev_id, const u8 *addr)
+{
+	return ath10k_wait_for_peer_common(ar, vdev_id, addr, true);
+}
+
+int ath10k_wait_for_peer_deleted(struct ath10k *ar, int vdev_id, const u8 *addr)
+{
+	return ath10k_wait_for_peer_common(ar, vdev_id, addr, false);
+}
+
+void ath10k_peer_map_event(struct ath10k_htt *htt,
+			   struct htt_peer_map_event *ev)
+{
+	struct ath10k *ar = htt->ar;
+	struct ath10k_peer *peer;
+
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find(ar, ev->vdev_id, ev->addr);
+	if (!peer) {
+		peer = kzalloc(sizeof(*peer), GFP_ATOMIC);
+		if (!peer)
+			goto exit;
+
+		peer->vdev_id = ev->vdev_id;
+		memcpy(peer->addr, ev->addr, ETH_ALEN);
+		list_add(&peer->list, &ar->peers);
+		wake_up(&ar->peer_mapping_wq);
+	}
+
+	ath10k_dbg(ATH10K_DBG_HTT, "htt peer map vdev %d peer %pM id %d\n",
+		   ev->vdev_id, ev->addr, ev->peer_id);
+
+	set_bit(ev->peer_id, peer->peer_ids);
+exit:
+	spin_unlock_bh(&ar->data_lock);
+}
+
+void ath10k_peer_unmap_event(struct ath10k_htt *htt,
+			     struct htt_peer_unmap_event *ev)
+{
+	struct ath10k *ar = htt->ar;
+	struct ath10k_peer *peer;
+
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find_by_id(ar, ev->peer_id);
+	if (!peer) {
+		ath10k_warn("unknown peer id %d\n", ev->peer_id);
+		goto exit;
+	}
+
+	ath10k_dbg(ATH10K_DBG_HTT, "htt peer unmap vdev %d peer %pM id %d\n",
+		   peer->vdev_id, peer->addr, ev->peer_id);
+
+	clear_bit(ev->peer_id, peer->peer_ids);
+
+	if (bitmap_empty(peer->peer_ids, ATH10K_MAX_NUM_PEER_IDS)) {
+		list_del(&peer->list);
+		kfree(peer);
+		wake_up(&ar->peer_mapping_wq);
+	}
+
+exit:
+	spin_unlock_bh(&ar->data_lock);
+}
diff --git a/drivers/net/wireless/ath/ath10k/txrx.h b/drivers/net/wireless/ath/ath10k/txrx.h
new file mode 100644
index 000000000000..e78632a76df7
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/txrx.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef _TXRX_H_
+#define _TXRX_H_
+
+#include "htt.h"
+
+void ath10k_txrx_tx_unref(struct ath10k_htt *htt, struct sk_buff *txdesc);
+void ath10k_txrx_tx_completed(struct ath10k_htt *htt,
+			      const struct htt_tx_done *tx_done);
+void ath10k_process_rx(struct ath10k *ar, struct htt_rx_info *info);
+
+struct ath10k_peer *ath10k_peer_find(struct ath10k *ar, int vdev_id,
+				     const u8 *addr);
+int ath10k_wait_for_peer_created(struct ath10k *ar, int vdev_id,
+				 const u8 *addr);
+int ath10k_wait_for_peer_deleted(struct ath10k *ar, int vdev_id,
+				 const u8 *addr);
+
+void ath10k_peer_map_event(struct ath10k_htt *htt,
+			   struct htt_peer_map_event *ev);
+void ath10k_peer_unmap_event(struct ath10k_htt *htt,
+			     struct htt_peer_unmap_event *ev);
+
+#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
new file mode 100644
index 000000000000..7d4b7987422d
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -0,0 +1,2081 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/skbuff.h>
+
+#include "core.h"
+#include "htc.h"
+#include "debug.h"
+#include "wmi.h"
+#include "mac.h"
+
+void ath10k_wmi_flush_tx(struct ath10k *ar)
+{
+	int ret;
+
+	ret = wait_event_timeout(ar->wmi.wq,
+				 atomic_read(&ar->wmi.pending_tx_count) == 0,
+				 5*HZ);
+	if (atomic_read(&ar->wmi.pending_tx_count) == 0)
+		return;
+
+	if (ret == 0)
+		ret = -ETIMEDOUT;
+
+	if (ret < 0)
+		ath10k_warn("wmi flush failed (%d)\n", ret);
+}
+
+int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
+{
+	int ret;
+	ret = wait_for_completion_timeout(&ar->wmi.service_ready,
+					  WMI_SERVICE_READY_TIMEOUT_HZ);
+	return ret;
+}
+
+int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar)
+{
+	int ret;
+	ret = wait_for_completion_timeout(&ar->wmi.unified_ready,
+					  WMI_UNIFIED_READY_TIMEOUT_HZ);
+	return ret;
+}
+
+static struct sk_buff *ath10k_wmi_alloc_skb(u32 len)
+{
+	struct sk_buff *skb;
+	u32 round_len = roundup(len, 4);
+
+	skb = ath10k_htc_alloc_skb(WMI_SKB_HEADROOM + round_len);
+	if (!skb)
+		return NULL;
+
+	skb_reserve(skb, WMI_SKB_HEADROOM);
+	if (!IS_ALIGNED((unsigned long)skb->data, 4))
+		ath10k_warn("Unaligned WMI skb\n");
+
+	skb_put(skb, round_len);
+	memset(skb->data, 0, round_len);
+
+	return skb;
+}
+
+static void ath10k_wmi_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb)
+{
+	dev_kfree_skb(skb);
+
+	if (atomic_sub_return(1, &ar->wmi.pending_tx_count) == 0)
+		wake_up(&ar->wmi.wq);
+}
+
+/* WMI command API */
+static int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb,
+			       enum wmi_cmd_id cmd_id)
+{
+	struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
+	struct wmi_cmd_hdr *cmd_hdr;
+	int status;
+	u32 cmd = 0;
+
+	if (skb_push(skb, sizeof(struct wmi_cmd_hdr)) == NULL)
+		return -ENOMEM;
+
+	cmd |= SM(cmd_id, WMI_CMD_HDR_CMD_ID);
+
+	cmd_hdr = (struct wmi_cmd_hdr *)skb->data;
+	cmd_hdr->cmd_id = __cpu_to_le32(cmd);
+
+	if (atomic_add_return(1, &ar->wmi.pending_tx_count) >
+	    WMI_MAX_PENDING_TX_COUNT) {
+		/* avoid using up memory when FW hangs */
+		atomic_dec(&ar->wmi.pending_tx_count);
+		return -EBUSY;
+	}
+
+	memset(skb_cb, 0, sizeof(*skb_cb));
+
+	trace_ath10k_wmi_cmd(cmd_id, skb->data, skb->len);
+
+	status = ath10k_htc_send(ar->htc, ar->wmi.eid, skb);
+	if (status) {
+		dev_kfree_skb_any(skb);
+		atomic_dec(&ar->wmi.pending_tx_count);
+		return status;
+	}
+
+	return 0;
+}
+
+static int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct wmi_scan_event *event = (struct wmi_scan_event *)skb->data;
+	enum wmi_scan_event_type event_type;
+	enum wmi_scan_completion_reason reason;
+	u32 freq;
+	u32 req_id;
+	u32 scan_id;
+	u32 vdev_id;
+
+	event_type = __le32_to_cpu(event->event_type);
+	reason     = __le32_to_cpu(event->reason);
+	freq       = __le32_to_cpu(event->channel_freq);
+	req_id     = __le32_to_cpu(event->scan_req_id);
+	scan_id    = __le32_to_cpu(event->scan_id);
+	vdev_id    = __le32_to_cpu(event->vdev_id);
+
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_SCAN_EVENTID\n");
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "scan event type %d reason %d freq %d req_id %d "
+		   "scan_id %d vdev_id %d\n",
+		   event_type, reason, freq, req_id, scan_id, vdev_id);
+
+	spin_lock_bh(&ar->data_lock);
+
+	switch (event_type) {
+	case WMI_SCAN_EVENT_STARTED:
+		ath10k_dbg(ATH10K_DBG_WMI, "SCAN_EVENT_STARTED\n");
+		if (ar->scan.in_progress && ar->scan.is_roc)
+			ieee80211_ready_on_channel(ar->hw);
+
+		complete(&ar->scan.started);
+		break;
+	case WMI_SCAN_EVENT_COMPLETED:
+		ath10k_dbg(ATH10K_DBG_WMI, "SCAN_EVENT_COMPLETED\n");
+		switch (reason) {
+		case WMI_SCAN_REASON_COMPLETED:
+			ath10k_dbg(ATH10K_DBG_WMI, "SCAN_REASON_COMPLETED\n");
+			break;
+		case WMI_SCAN_REASON_CANCELLED:
+			ath10k_dbg(ATH10K_DBG_WMI, "SCAN_REASON_CANCELED\n");
+			break;
+		case WMI_SCAN_REASON_PREEMPTED:
+			ath10k_dbg(ATH10K_DBG_WMI, "SCAN_REASON_PREEMPTED\n");
+			break;
+		case WMI_SCAN_REASON_TIMEDOUT:
+			ath10k_dbg(ATH10K_DBG_WMI, "SCAN_REASON_TIMEDOUT\n");
+			break;
+		default:
+			break;
+		}
+
+		ar->scan_channel = NULL;
+		if (!ar->scan.in_progress) {
+			ath10k_warn("no scan requested, ignoring\n");
+			break;
+		}
+
+		if (ar->scan.is_roc) {
+			ath10k_offchan_tx_purge(ar);
+
+			if (!ar->scan.aborting)
+				ieee80211_remain_on_channel_expired(ar->hw);
+		} else {
+			ieee80211_scan_completed(ar->hw, ar->scan.aborting);
+		}
+
+		del_timer(&ar->scan.timeout);
+		complete_all(&ar->scan.completed);
+		ar->scan.in_progress = false;
+		break;
+	case WMI_SCAN_EVENT_BSS_CHANNEL:
+		ath10k_dbg(ATH10K_DBG_WMI, "SCAN_EVENT_BSS_CHANNEL\n");
+		ar->scan_channel = NULL;
+		break;
+	case WMI_SCAN_EVENT_FOREIGN_CHANNEL:
+		ath10k_dbg(ATH10K_DBG_WMI, "SCAN_EVENT_FOREIGN_CHANNEL\n");
+		ar->scan_channel = ieee80211_get_channel(ar->hw->wiphy, freq);
+		if (ar->scan.in_progress && ar->scan.is_roc &&
+		    ar->scan.roc_freq == freq) {
+			complete(&ar->scan.on_channel);
+		}
+		break;
+	case WMI_SCAN_EVENT_DEQUEUED:
+		ath10k_dbg(ATH10K_DBG_WMI, "SCAN_EVENT_DEQUEUED\n");
+		break;
+	case WMI_SCAN_EVENT_PREEMPTED:
+		ath10k_dbg(ATH10K_DBG_WMI, "WMI_SCAN_EVENT_PREEMPTED\n");
+		break;
+	case WMI_SCAN_EVENT_START_FAILED:
+		ath10k_dbg(ATH10K_DBG_WMI, "WMI_SCAN_EVENT_START_FAILED\n");
+		break;
+	default:
+		break;
+	}
+
+	spin_unlock_bh(&ar->data_lock);
+	return 0;
+}
+
+static inline enum ieee80211_band phy_mode_to_band(u32 phy_mode)
+{
+	enum ieee80211_band band;
+
+	switch (phy_mode) {
+	case MODE_11A:
+	case MODE_11NA_HT20:
+	case MODE_11NA_HT40:
+	case MODE_11AC_VHT20:
+	case MODE_11AC_VHT40:
+	case MODE_11AC_VHT80:
+		band = IEEE80211_BAND_5GHZ;
+		break;
+	case MODE_11G:
+	case MODE_11B:
+	case MODE_11GONLY:
+	case MODE_11NG_HT20:
+	case MODE_11NG_HT40:
+	case MODE_11AC_VHT20_2G:
+	case MODE_11AC_VHT40_2G:
+	case MODE_11AC_VHT80_2G:
+	default:
+		band = IEEE80211_BAND_2GHZ;
+	}
+
+	return band;
+}
+
+static inline u8 get_rate_idx(u32 rate, enum ieee80211_band band)
+{
+	u8 rate_idx = 0;
+
+	/* rate in Kbps */
+	switch (rate) {
+	case 1000:
+		rate_idx = 0;
+		break;
+	case 2000:
+		rate_idx = 1;
+		break;
+	case 5500:
+		rate_idx = 2;
+		break;
+	case 11000:
+		rate_idx = 3;
+		break;
+	case 6000:
+		rate_idx = 4;
+		break;
+	case 9000:
+		rate_idx = 5;
+		break;
+	case 12000:
+		rate_idx = 6;
+		break;
+	case 18000:
+		rate_idx = 7;
+		break;
+	case 24000:
+		rate_idx = 8;
+		break;
+	case 36000:
+		rate_idx = 9;
+		break;
+	case 48000:
+		rate_idx = 10;
+		break;
+	case 54000:
+		rate_idx = 11;
+		break;
+	default:
+		break;
+	}
+
+	if (band == IEEE80211_BAND_5GHZ) {
+		if (rate_idx > 3)
+			/* Omit CCK rates */
+			rate_idx -= 4;
+		else
+			rate_idx = 0;
+	}
+
+	return rate_idx;
+}
+
+static int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct wmi_mgmt_rx_event *event = (struct wmi_mgmt_rx_event *)skb->data;
+	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+	struct ieee80211_hdr *hdr;
+	u32 rx_status;
+	u32 channel;
+	u32 phy_mode;
+	u32 snr;
+	u32 rate;
+	u32 buf_len;
+	u16 fc;
+
+	channel   = __le32_to_cpu(event->hdr.channel);
+	buf_len   = __le32_to_cpu(event->hdr.buf_len);
+	rx_status = __le32_to_cpu(event->hdr.status);
+	snr       = __le32_to_cpu(event->hdr.snr);
+	phy_mode  = __le32_to_cpu(event->hdr.phy_mode);
+	rate	  = __le32_to_cpu(event->hdr.rate);
+
+	memset(status, 0, sizeof(*status));
+
+	ath10k_dbg(ATH10K_DBG_MGMT,
+		   "event mgmt rx status %08x\n", rx_status);
+
+	if (rx_status & WMI_RX_STATUS_ERR_DECRYPT) {
+		dev_kfree_skb(skb);
+		return 0;
+	}
+
+	if (rx_status & WMI_RX_STATUS_ERR_KEY_CACHE_MISS) {
+		dev_kfree_skb(skb);
+		return 0;
+	}
+
+	if (rx_status & WMI_RX_STATUS_ERR_CRC)
+		status->flag |= RX_FLAG_FAILED_FCS_CRC;
+	if (rx_status & WMI_RX_STATUS_ERR_MIC)
+		status->flag |= RX_FLAG_MMIC_ERROR;
+
+	status->band = phy_mode_to_band(phy_mode);
+	status->freq = ieee80211_channel_to_frequency(channel, status->band);
+	status->signal = snr + ATH10K_DEFAULT_NOISE_FLOOR;
+	status->rate_idx = get_rate_idx(rate, status->band);
+
+	skb_pull(skb, sizeof(event->hdr));
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+	fc = le16_to_cpu(hdr->frame_control);
+
+	if (fc & IEEE80211_FCTL_PROTECTED) {
+		status->flag |= RX_FLAG_DECRYPTED | RX_FLAG_IV_STRIPPED |
+				RX_FLAG_MMIC_STRIPPED;
+		hdr->frame_control = __cpu_to_le16(fc &
+					~IEEE80211_FCTL_PROTECTED);
+	}
+
+	ath10k_dbg(ATH10K_DBG_MGMT,
+		   "event mgmt rx skb %p len %d ftype %02x stype %02x\n",
+		   skb, skb->len,
+		   fc & IEEE80211_FCTL_FTYPE, fc & IEEE80211_FCTL_STYPE);
+
+	ath10k_dbg(ATH10K_DBG_MGMT,
+		   "event mgmt rx freq %d band %d snr %d, rate_idx %d\n",
+		   status->freq, status->band, status->signal,
+		   status->rate_idx);
+
+	/*
+	 * packets from HTC come aligned to 4byte boundaries
+	 * because they can originally come in along with a trailer
+	 */
+	skb_trim(skb, buf_len);
+
+	ieee80211_rx(ar->hw, skb);
+	return 0;
+}
+
+static void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_CHAN_INFO_EVENTID\n");
+}
+
+static void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_ECHO_EVENTID\n");
+}
+
+static void ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_DEBUG_MESG_EVENTID\n");
+}
+
+static void ath10k_wmi_event_update_stats(struct ath10k *ar,
+					  struct sk_buff *skb)
+{
+	struct wmi_stats_event *ev = (struct wmi_stats_event *)skb->data;
+
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_UPDATE_STATS_EVENTID\n");
+
+	ath10k_debug_read_target_stats(ar, ev);
+}
+
+static void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar,
+					     struct sk_buff *skb)
+{
+	struct wmi_vdev_start_response_event *ev;
+
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_VDEV_START_RESP_EVENTID\n");
+
+	ev = (struct wmi_vdev_start_response_event *)skb->data;
+
+	if (WARN_ON(__le32_to_cpu(ev->status)))
+		return;
+
+	complete(&ar->vdev_setup_done);
+}
+
+static void ath10k_wmi_event_vdev_stopped(struct ath10k *ar,
+					  struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_VDEV_STOPPED_EVENTID\n");
+	complete(&ar->vdev_setup_done);
+}
+
+static void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar,
+					      struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_PEER_STA_KICKOUT_EVENTID\n");
+}
+
+/*
+ * FIXME
+ *
+ * We don't report to mac80211 sleep state of connected
+ * stations. Due to this mac80211 can't fill in TIM IE
+ * correctly.
+ *
+ * I know of no way of getting nullfunc frames that contain
+ * sleep transition from connected stations - these do not
+ * seem to be sent from the target to the host. There also
+ * doesn't seem to be a dedicated event for that. So the
+ * only way left to do this would be to read tim_bitmap
+ * during SWBA.
+ *
+ * We could probably try using tim_bitmap from SWBA to tell
+ * mac80211 which stations are asleep and which are not. The
+ * problem here is calling mac80211 functions so many times
+ * could take too long and make us miss the time to submit
+ * the beacon to the target.
+ *
+ * So as a workaround we try to extend the TIM IE if there
+ * is unicast buffered for stations with aid > 7 and fill it
+ * in ourselves.
+ */
+static void ath10k_wmi_update_tim(struct ath10k *ar,
+				  struct ath10k_vif *arvif,
+				  struct sk_buff *bcn,
+				  struct wmi_bcn_info *bcn_info)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)bcn->data;
+	struct ieee80211_tim_ie *tim;
+	u8 *ies, *ie;
+	u8 ie_len, pvm_len;
+
+	/* if next SWBA has no tim_changed the tim_bitmap is garbage.
+	 * we must copy the bitmap upon change and reuse it later */
+	if (__le32_to_cpu(bcn_info->tim_info.tim_changed)) {
+		int i;
+
+		BUILD_BUG_ON(sizeof(arvif->u.ap.tim_bitmap) !=
+			     sizeof(bcn_info->tim_info.tim_bitmap));
+
+		for (i = 0; i < sizeof(arvif->u.ap.tim_bitmap); i++) {
+			__le32 t = bcn_info->tim_info.tim_bitmap[i / 4];
+			u32 v = __le32_to_cpu(t);
+			arvif->u.ap.tim_bitmap[i] = (v >> ((i % 4) * 8)) & 0xFF;
+		}
+
+		/* FW reports either length 0 or 16
+		 * so we calculate this on our own */
+		arvif->u.ap.tim_len = 0;
+		for (i = 0; i < sizeof(arvif->u.ap.tim_bitmap); i++)
+			if (arvif->u.ap.tim_bitmap[i])
+				arvif->u.ap.tim_len = i;
+
+		arvif->u.ap.tim_len++;
+	}
+
+	ies = bcn->data;
+	ies += ieee80211_hdrlen(hdr->frame_control);
+	ies += 12; /* fixed parameters */
+
+	ie = (u8 *)cfg80211_find_ie(WLAN_EID_TIM, ies,
+				    (u8 *)skb_tail_pointer(bcn) - ies);
+	if (!ie) {
+		/* highly unlikely for mac80211 */
+		ath10k_warn("no tim ie found;\n");
+		return;
+	}
+
+	tim = (void *)ie + 2;
+	ie_len = ie[1];
+	pvm_len = ie_len - 3; /* exclude dtim count, dtim period, bmap ctl */
+
+	if (pvm_len < arvif->u.ap.tim_len) {
+		int expand_size = sizeof(arvif->u.ap.tim_bitmap) - pvm_len;
+		int move_size = skb_tail_pointer(bcn) - (ie + 2 + ie_len);
+		void *next_ie = ie + 2 + ie_len;
+
+		if (skb_put(bcn, expand_size)) {
+			memmove(next_ie + expand_size, next_ie, move_size);
+
+			ie[1] += expand_size;
+			ie_len += expand_size;
+			pvm_len += expand_size;
+		} else {
+			ath10k_warn("tim expansion failed\n");
+		}
+	}
+
+	if (pvm_len > sizeof(arvif->u.ap.tim_bitmap)) {
+		ath10k_warn("tim pvm length is too great (%d)\n", pvm_len);
+		return;
+	}
+
+	tim->bitmap_ctrl = !!__le32_to_cpu(bcn_info->tim_info.tim_mcast);
+	memcpy(tim->virtual_map, arvif->u.ap.tim_bitmap, pvm_len);
+
+	ath10k_dbg(ATH10K_DBG_MGMT, "dtim %d/%d mcast %d pvmlen %d\n",
+		   tim->dtim_count, tim->dtim_period,
+		   tim->bitmap_ctrl, pvm_len);
+}
+
+static void ath10k_p2p_fill_noa_ie(u8 *data, u32 len,
+				   struct wmi_p2p_noa_info *noa)
+{
+	struct ieee80211_p2p_noa_attr *noa_attr;
+	u8  ctwindow_oppps = noa->ctwindow_oppps;
+	u8 ctwindow = ctwindow_oppps >> WMI_P2P_OPPPS_CTWINDOW_OFFSET;
+	bool oppps = !!(ctwindow_oppps & WMI_P2P_OPPPS_ENABLE_BIT);
+	__le16 *noa_attr_len;
+	u16 attr_len;
+	u8 noa_descriptors = noa->num_descriptors;
+	int i;
+
+	/* P2P IE */
+	data[0] = WLAN_EID_VENDOR_SPECIFIC;
+	data[1] = len - 2;
+	data[2] = (WLAN_OUI_WFA >> 16) & 0xff;
+	data[3] = (WLAN_OUI_WFA >> 8) & 0xff;
+	data[4] = (WLAN_OUI_WFA >> 0) & 0xff;
+	data[5] = WLAN_OUI_TYPE_WFA_P2P;
+
+	/* NOA ATTR */
+	data[6] = IEEE80211_P2P_ATTR_ABSENCE_NOTICE;
+	noa_attr_len = (__le16 *)&data[7]; /* 2 bytes */
+	noa_attr = (struct ieee80211_p2p_noa_attr *)&data[9];
+
+	noa_attr->index = noa->index;
+	noa_attr->oppps_ctwindow = ctwindow;
+	if (oppps)
+		noa_attr->oppps_ctwindow |= IEEE80211_P2P_OPPPS_ENABLE_BIT;
+
+	for (i = 0; i < noa_descriptors; i++) {
+		noa_attr->desc[i].count =
+			__le32_to_cpu(noa->descriptors[i].type_count);
+		noa_attr->desc[i].duration = noa->descriptors[i].duration;
+		noa_attr->desc[i].interval = noa->descriptors[i].interval;
+		noa_attr->desc[i].start_time = noa->descriptors[i].start_time;
+	}
+
+	attr_len = 2; /* index + oppps_ctwindow */
+	attr_len += noa_descriptors * sizeof(struct ieee80211_p2p_noa_desc);
+	*noa_attr_len = __cpu_to_le16(attr_len);
+}
+
+static u32 ath10k_p2p_calc_noa_ie_len(struct wmi_p2p_noa_info *noa)
+{
+	u32 len = 0;
+	u8 noa_descriptors = noa->num_descriptors;
+	u8 opp_ps_info = noa->ctwindow_oppps;
+	bool opps_enabled = !!(opp_ps_info & WMI_P2P_OPPPS_ENABLE_BIT);
+
+
+	if (!noa_descriptors && !opps_enabled)
+		return len;
+
+	len += 1 + 1 + 4; /* EID + len + OUI */
+	len += 1 + 2; /* noa attr  + attr len */
+	len += 1 + 1; /* index + oppps_ctwindow */
+	len += noa_descriptors * sizeof(struct ieee80211_p2p_noa_desc);
+
+	return len;
+}
+
+static void ath10k_wmi_update_noa(struct ath10k *ar, struct ath10k_vif *arvif,
+				  struct sk_buff *bcn,
+				  struct wmi_bcn_info *bcn_info)
+{
+	struct wmi_p2p_noa_info *noa = &bcn_info->p2p_noa_info;
+	u8 *new_data, *old_data = arvif->u.ap.noa_data;
+	u32 new_len;
+
+	if (arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+		return;
+
+	ath10k_dbg(ATH10K_DBG_MGMT, "noa changed: %d\n", noa->changed);
+	if (noa->changed & WMI_P2P_NOA_CHANGED_BIT) {
+		new_len = ath10k_p2p_calc_noa_ie_len(noa);
+		if (!new_len)
+			goto cleanup;
+
+		new_data = kmalloc(new_len, GFP_ATOMIC);
+		if (!new_data)
+			goto cleanup;
+
+		ath10k_p2p_fill_noa_ie(new_data, new_len, noa);
+
+		spin_lock_bh(&ar->data_lock);
+		arvif->u.ap.noa_data = new_data;
+		arvif->u.ap.noa_len = new_len;
+		spin_unlock_bh(&ar->data_lock);
+		kfree(old_data);
+	}
+
+	if (arvif->u.ap.noa_data)
+		if (!pskb_expand_head(bcn, 0, arvif->u.ap.noa_len, GFP_ATOMIC))
+			memcpy(skb_put(bcn, arvif->u.ap.noa_len),
+			       arvif->u.ap.noa_data,
+			       arvif->u.ap.noa_len);
+	return;
+
+cleanup:
+	spin_lock_bh(&ar->data_lock);
+	arvif->u.ap.noa_data = NULL;
+	arvif->u.ap.noa_len = 0;
+	spin_unlock_bh(&ar->data_lock);
+	kfree(old_data);
+}
+
+
+static void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct wmi_host_swba_event *ev;
+	u32 map;
+	int i = -1;
+	struct wmi_bcn_info *bcn_info;
+	struct ath10k_vif *arvif;
+	struct wmi_bcn_tx_arg arg;
+	struct sk_buff *bcn;
+	int vdev_id = 0;
+	int ret;
+
+	ath10k_dbg(ATH10K_DBG_MGMT, "WMI_HOST_SWBA_EVENTID\n");
+
+	ev = (struct wmi_host_swba_event *)skb->data;
+	map = __le32_to_cpu(ev->vdev_map);
+
+	ath10k_dbg(ATH10K_DBG_MGMT, "host swba:\n"
+		   "-vdev map 0x%x\n",
+		   ev->vdev_map);
+
+	for (; map; map >>= 1, vdev_id++) {
+		if (!(map & 0x1))
+			continue;
+
+		i++;
+
+		if (i >= WMI_MAX_AP_VDEV) {
+			ath10k_warn("swba has corrupted vdev map\n");
+			break;
+		}
+
+		bcn_info = &ev->bcn_info[i];
+
+		ath10k_dbg(ATH10K_DBG_MGMT,
+			   "-bcn_info[%d]:\n"
+			   "--tim_len %d\n"
+			   "--tim_mcast %d\n"
+			   "--tim_changed %d\n"
+			   "--tim_num_ps_pending %d\n"
+			   "--tim_bitmap 0x%08x%08x%08x%08x\n",
+			   i,
+			   __le32_to_cpu(bcn_info->tim_info.tim_len),
+			   __le32_to_cpu(bcn_info->tim_info.tim_mcast),
+			   __le32_to_cpu(bcn_info->tim_info.tim_changed),
+			   __le32_to_cpu(bcn_info->tim_info.tim_num_ps_pending),
+			   __le32_to_cpu(bcn_info->tim_info.tim_bitmap[3]),
+			   __le32_to_cpu(bcn_info->tim_info.tim_bitmap[2]),
+			   __le32_to_cpu(bcn_info->tim_info.tim_bitmap[1]),
+			   __le32_to_cpu(bcn_info->tim_info.tim_bitmap[0]));
+
+		arvif = ath10k_get_arvif(ar, vdev_id);
+		if (arvif == NULL) {
+			ath10k_warn("no vif for vdev_id %d found\n", vdev_id);
+			continue;
+		}
+
+		bcn = ieee80211_beacon_get(ar->hw, arvif->vif);
+		if (!bcn) {
+			ath10k_warn("could not get mac80211 beacon\n");
+			continue;
+		}
+
+		ath10k_tx_h_seq_no(bcn);
+		ath10k_wmi_update_tim(ar, arvif, bcn, bcn_info);
+		ath10k_wmi_update_noa(ar, arvif, bcn, bcn_info);
+
+		arg.vdev_id = arvif->vdev_id;
+		arg.tx_rate = 0;
+		arg.tx_power = 0;
+		arg.bcn = bcn->data;
+		arg.bcn_len = bcn->len;
+
+		ret = ath10k_wmi_beacon_send(ar, &arg);
+		if (ret)
+			ath10k_warn("could not send beacon (%d)\n", ret);
+
+		dev_kfree_skb_any(bcn);
+	}
+}
+
+static void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar,
+					       struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_TBTTOFFSET_UPDATE_EVENTID\n");
+}
+
+static void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_PHYERR_EVENTID\n");
+}
+
+static void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_ROAM_EVENTID\n");
+}
+
+static void ath10k_wmi_event_profile_match(struct ath10k *ar,
+				    struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_PROFILE_MATCH\n");
+}
+
+static void ath10k_wmi_event_debug_print(struct ath10k *ar,
+				  struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_DEBUG_PRINT_EVENTID\n");
+}
+
+static void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_PDEV_QVIT_EVENTID\n");
+}
+
+static void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar,
+					       struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_WLAN_PROFILE_DATA_EVENTID\n");
+}
+
+static void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
+					     struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_RTT_MEASUREMENT_REPORT_EVENTID\n");
+}
+
+static void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
+					     struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_TSF_MEASUREMENT_REPORT_EVENTID\n");
+}
+
+static void ath10k_wmi_event_rtt_error_report(struct ath10k *ar,
+					      struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_RTT_ERROR_REPORT_EVENTID\n");
+}
+
+static void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar,
+					     struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_WOW_WAKEUP_HOST_EVENTID\n");
+}
+
+static void ath10k_wmi_event_dcs_interference(struct ath10k *ar,
+					      struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_DCS_INTERFERENCE_EVENTID\n");
+}
+
+static void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar,
+					     struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_PDEV_TPC_CONFIG_EVENTID\n");
+}
+
+static void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar,
+					   struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_PDEV_FTM_INTG_EVENTID\n");
+}
+
+static void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
+					 struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_GTK_OFFLOAD_STATUS_EVENTID\n");
+}
+
+static void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar,
+					    struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_GTK_REKEY_FAIL_EVENTID\n");
+}
+
+static void ath10k_wmi_event_delba_complete(struct ath10k *ar,
+					    struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_TX_DELBA_COMPLETE_EVENTID\n");
+}
+
+static void ath10k_wmi_event_addba_complete(struct ath10k *ar,
+					    struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_TX_ADDBA_COMPLETE_EVENTID\n");
+}
+
+static void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
+						struct sk_buff *skb)
+{
+	ath10k_dbg(ATH10K_DBG_WMI, "WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID\n");
+}
+
+static void ath10k_wmi_service_ready_event_rx(struct ath10k *ar,
+					      struct sk_buff *skb)
+{
+	struct wmi_service_ready_event *ev = (void *)skb->data;
+
+	if (skb->len < sizeof(*ev)) {
+		ath10k_warn("Service ready event was %d B but expected %zu B. Wrong firmware version?\n",
+			    skb->len, sizeof(*ev));
+		return;
+	}
+
+	ar->hw_min_tx_power = __le32_to_cpu(ev->hw_min_tx_power);
+	ar->hw_max_tx_power = __le32_to_cpu(ev->hw_max_tx_power);
+	ar->ht_cap_info = __le32_to_cpu(ev->ht_cap_info);
+	ar->vht_cap_info = __le32_to_cpu(ev->vht_cap_info);
+	ar->fw_version_major =
+		(__le32_to_cpu(ev->sw_version) & 0xff000000) >> 24;
+	ar->fw_version_minor = (__le32_to_cpu(ev->sw_version) & 0x00ffffff);
+	ar->fw_version_release =
+		(__le32_to_cpu(ev->sw_version_1) & 0xffff0000) >> 16;
+	ar->fw_version_build = (__le32_to_cpu(ev->sw_version_1) & 0x0000ffff);
+	ar->phy_capability = __le32_to_cpu(ev->phy_capability);
+
+	ar->ath_common.regulatory.current_rd =
+		__le32_to_cpu(ev->hal_reg_capabilities.eeprom_rd);
+
+	ath10k_debug_read_service_map(ar, ev->wmi_service_bitmap,
+				      sizeof(ev->wmi_service_bitmap));
+
+	if (strlen(ar->hw->wiphy->fw_version) == 0) {
+		snprintf(ar->hw->wiphy->fw_version,
+			 sizeof(ar->hw->wiphy->fw_version),
+			 "%u.%u.%u.%u",
+			 ar->fw_version_major,
+			 ar->fw_version_minor,
+			 ar->fw_version_release,
+			 ar->fw_version_build);
+	}
+
+	/* FIXME: it probably should be better to support this */
+	if (__le32_to_cpu(ev->num_mem_reqs) > 0) {
+		ath10k_warn("target requested %d memory chunks; ignoring\n",
+			    __le32_to_cpu(ev->num_mem_reqs));
+	}
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi event service ready sw_ver 0x%08x sw_ver1 0x%08x abi_ver %u phy_cap 0x%08x ht_cap 0x%08x vht_cap 0x%08x vht_supp_msc 0x%08x sys_cap_info 0x%08x mem_reqs %u\n",
+		   __le32_to_cpu(ev->sw_version),
+		   __le32_to_cpu(ev->sw_version_1),
+		   __le32_to_cpu(ev->abi_version),
+		   __le32_to_cpu(ev->phy_capability),
+		   __le32_to_cpu(ev->ht_cap_info),
+		   __le32_to_cpu(ev->vht_cap_info),
+		   __le32_to_cpu(ev->vht_supp_mcs),
+		   __le32_to_cpu(ev->sys_cap_info),
+		   __le32_to_cpu(ev->num_mem_reqs));
+
+	complete(&ar->wmi.service_ready);
+}
+
+static int ath10k_wmi_ready_event_rx(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct wmi_ready_event *ev = (struct wmi_ready_event *)skb->data;
+
+	if (WARN_ON(skb->len < sizeof(*ev)))
+		return -EINVAL;
+
+	memcpy(ar->mac_addr, ev->mac_addr.addr, ETH_ALEN);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi event ready sw_version %u abi_version %u mac_addr %pM status %d\n",
+		   __le32_to_cpu(ev->sw_version),
+		   __le32_to_cpu(ev->abi_version),
+		   ev->mac_addr.addr,
+		   __le32_to_cpu(ev->status));
+
+	complete(&ar->wmi.unified_ready);
+	return 0;
+}
+
+static void ath10k_wmi_event_process(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct wmi_cmd_hdr *cmd_hdr;
+	enum wmi_event_id id;
+	u16 len;
+
+	cmd_hdr = (struct wmi_cmd_hdr *)skb->data;
+	id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID);
+
+	if (skb_pull(skb, sizeof(struct wmi_cmd_hdr)) == NULL)
+		return;
+
+	len = skb->len;
+
+	trace_ath10k_wmi_event(id, skb->data, skb->len);
+
+	switch (id) {
+	case WMI_MGMT_RX_EVENTID:
+		ath10k_wmi_event_mgmt_rx(ar, skb);
+		/* mgmt_rx() owns the skb now! */
+		return;
+	case WMI_SCAN_EVENTID:
+		ath10k_wmi_event_scan(ar, skb);
+		break;
+	case WMI_CHAN_INFO_EVENTID:
+		ath10k_wmi_event_chan_info(ar, skb);
+		break;
+	case WMI_ECHO_EVENTID:
+		ath10k_wmi_event_echo(ar, skb);
+		break;
+	case WMI_DEBUG_MESG_EVENTID:
+		ath10k_wmi_event_debug_mesg(ar, skb);
+		break;
+	case WMI_UPDATE_STATS_EVENTID:
+		ath10k_wmi_event_update_stats(ar, skb);
+		break;
+	case WMI_VDEV_START_RESP_EVENTID:
+		ath10k_wmi_event_vdev_start_resp(ar, skb);
+		break;
+	case WMI_VDEV_STOPPED_EVENTID:
+		ath10k_wmi_event_vdev_stopped(ar, skb);
+		break;
+	case WMI_PEER_STA_KICKOUT_EVENTID:
+		ath10k_wmi_event_peer_sta_kickout(ar, skb);
+		break;
+	case WMI_HOST_SWBA_EVENTID:
+		ath10k_wmi_event_host_swba(ar, skb);
+		break;
+	case WMI_TBTTOFFSET_UPDATE_EVENTID:
+		ath10k_wmi_event_tbttoffset_update(ar, skb);
+		break;
+	case WMI_PHYERR_EVENTID:
+		ath10k_wmi_event_phyerr(ar, skb);
+		break;
+	case WMI_ROAM_EVENTID:
+		ath10k_wmi_event_roam(ar, skb);
+		break;
+	case WMI_PROFILE_MATCH:
+		ath10k_wmi_event_profile_match(ar, skb);
+		break;
+	case WMI_DEBUG_PRINT_EVENTID:
+		ath10k_wmi_event_debug_print(ar, skb);
+		break;
+	case WMI_PDEV_QVIT_EVENTID:
+		ath10k_wmi_event_pdev_qvit(ar, skb);
+		break;
+	case WMI_WLAN_PROFILE_DATA_EVENTID:
+		ath10k_wmi_event_wlan_profile_data(ar, skb);
+		break;
+	case WMI_RTT_MEASUREMENT_REPORT_EVENTID:
+		ath10k_wmi_event_rtt_measurement_report(ar, skb);
+		break;
+	case WMI_TSF_MEASUREMENT_REPORT_EVENTID:
+		ath10k_wmi_event_tsf_measurement_report(ar, skb);
+		break;
+	case WMI_RTT_ERROR_REPORT_EVENTID:
+		ath10k_wmi_event_rtt_error_report(ar, skb);
+		break;
+	case WMI_WOW_WAKEUP_HOST_EVENTID:
+		ath10k_wmi_event_wow_wakeup_host(ar, skb);
+		break;
+	case WMI_DCS_INTERFERENCE_EVENTID:
+		ath10k_wmi_event_dcs_interference(ar, skb);
+		break;
+	case WMI_PDEV_TPC_CONFIG_EVENTID:
+		ath10k_wmi_event_pdev_tpc_config(ar, skb);
+		break;
+	case WMI_PDEV_FTM_INTG_EVENTID:
+		ath10k_wmi_event_pdev_ftm_intg(ar, skb);
+		break;
+	case WMI_GTK_OFFLOAD_STATUS_EVENTID:
+		ath10k_wmi_event_gtk_offload_status(ar, skb);
+		break;
+	case WMI_GTK_REKEY_FAIL_EVENTID:
+		ath10k_wmi_event_gtk_rekey_fail(ar, skb);
+		break;
+	case WMI_TX_DELBA_COMPLETE_EVENTID:
+		ath10k_wmi_event_delba_complete(ar, skb);
+		break;
+	case WMI_TX_ADDBA_COMPLETE_EVENTID:
+		ath10k_wmi_event_addba_complete(ar, skb);
+		break;
+	case WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID:
+		ath10k_wmi_event_vdev_install_key_complete(ar, skb);
+		break;
+	case WMI_SERVICE_READY_EVENTID:
+		ath10k_wmi_service_ready_event_rx(ar, skb);
+		break;
+	case WMI_READY_EVENTID:
+		ath10k_wmi_ready_event_rx(ar, skb);
+		break;
+	default:
+		ath10k_warn("Unknown eventid: %d\n", id);
+		break;
+	}
+
+	dev_kfree_skb(skb);
+}
+
+static void ath10k_wmi_event_work(struct work_struct *work)
+{
+	struct ath10k *ar = container_of(work, struct ath10k,
+					 wmi.wmi_event_work);
+	struct sk_buff *skb;
+
+	for (;;) {
+		skb = skb_dequeue(&ar->wmi.wmi_event_list);
+		if (!skb)
+			break;
+
+		ath10k_wmi_event_process(ar, skb);
+	}
+}
+
+static void ath10k_wmi_process_rx(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct wmi_cmd_hdr *cmd_hdr = (struct wmi_cmd_hdr *)skb->data;
+	enum wmi_event_id event_id;
+
+	event_id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID);
+
+	/* some events require to be handled ASAP
+	 * thus can't be defered to a worker thread */
+	switch (event_id) {
+	case WMI_HOST_SWBA_EVENTID:
+	case WMI_MGMT_RX_EVENTID:
+		ath10k_wmi_event_process(ar, skb);
+		return;
+	default:
+		break;
+	}
+
+	skb_queue_tail(&ar->wmi.wmi_event_list, skb);
+	queue_work(ar->workqueue, &ar->wmi.wmi_event_work);
+}
+
+/* WMI Initialization functions */
+int ath10k_wmi_attach(struct ath10k *ar)
+{
+	init_completion(&ar->wmi.service_ready);
+	init_completion(&ar->wmi.unified_ready);
+	init_waitqueue_head(&ar->wmi.wq);
+
+	skb_queue_head_init(&ar->wmi.wmi_event_list);
+	INIT_WORK(&ar->wmi.wmi_event_work, ath10k_wmi_event_work);
+
+	return 0;
+}
+
+void ath10k_wmi_detach(struct ath10k *ar)
+{
+	/* HTC should've drained the packets already */
+	if (WARN_ON(atomic_read(&ar->wmi.pending_tx_count) > 0))
+		ath10k_warn("there are still pending packets\n");
+
+	cancel_work_sync(&ar->wmi.wmi_event_work);
+	skb_queue_purge(&ar->wmi.wmi_event_list);
+}
+
+int ath10k_wmi_connect_htc_service(struct ath10k *ar)
+{
+	int status;
+	struct ath10k_htc_svc_conn_req conn_req;
+	struct ath10k_htc_svc_conn_resp conn_resp;
+
+	memset(&conn_req, 0, sizeof(conn_req));
+	memset(&conn_resp, 0, sizeof(conn_resp));
+
+	/* these fields are the same for all service endpoints */
+	conn_req.ep_ops.ep_tx_complete = ath10k_wmi_htc_tx_complete;
+	conn_req.ep_ops.ep_rx_complete = ath10k_wmi_process_rx;
+
+	/* connect to control service */
+	conn_req.service_id = ATH10K_HTC_SVC_ID_WMI_CONTROL;
+
+	status = ath10k_htc_connect_service(ar->htc, &conn_req, &conn_resp);
+	if (status) {
+		ath10k_warn("failed to connect to WMI CONTROL service status: %d\n",
+			    status);
+		return status;
+	}
+
+	ar->wmi.eid = conn_resp.eid;
+	return 0;
+}
+
+int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g,
+				  u16 rd5g, u16 ctl2g, u16 ctl5g)
+{
+	struct wmi_pdev_set_regdomain_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_pdev_set_regdomain_cmd *)skb->data;
+	cmd->reg_domain = __cpu_to_le32(rd);
+	cmd->reg_domain_2G = __cpu_to_le32(rd2g);
+	cmd->reg_domain_5G = __cpu_to_le32(rd5g);
+	cmd->conformance_test_limit_2G = __cpu_to_le32(ctl2g);
+	cmd->conformance_test_limit_5G = __cpu_to_le32(ctl5g);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi pdev regdomain rd %x rd2g %x rd5g %x ctl2g %x ctl5g %x\n",
+		   rd, rd2g, rd5g, ctl2g, ctl5g);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_PDEV_SET_REGDOMAIN_CMDID);
+}
+
+int ath10k_wmi_pdev_set_channel(struct ath10k *ar,
+				const struct wmi_channel_arg *arg)
+{
+	struct wmi_set_channel_cmd *cmd;
+	struct sk_buff *skb;
+
+	if (arg->passive)
+		return -EINVAL;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_set_channel_cmd *)skb->data;
+	cmd->chan.mhz               = __cpu_to_le32(arg->freq);
+	cmd->chan.band_center_freq1 = __cpu_to_le32(arg->freq);
+	cmd->chan.mode              = arg->mode;
+	cmd->chan.min_power         = arg->min_power;
+	cmd->chan.max_power         = arg->max_power;
+	cmd->chan.reg_power         = arg->max_reg_power;
+	cmd->chan.reg_classid       = arg->reg_class_id;
+	cmd->chan.antenna_max       = arg->max_antenna_gain;
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi set channel mode %d freq %d\n",
+		   arg->mode, arg->freq);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_PDEV_SET_CHANNEL_CMDID);
+}
+
+int ath10k_wmi_pdev_suspend_target(struct ath10k *ar)
+{
+	struct wmi_pdev_suspend_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_pdev_suspend_cmd *)skb->data;
+	cmd->suspend_opt = WMI_PDEV_SUSPEND;
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_PDEV_SUSPEND_CMDID);
+}
+
+int ath10k_wmi_pdev_resume_target(struct ath10k *ar)
+{
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(0);
+	if (skb == NULL)
+		return -ENOMEM;
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_PDEV_RESUME_CMDID);
+}
+
+int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id,
+			      u32 value)
+{
+	struct wmi_pdev_set_param_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_pdev_set_param_cmd *)skb->data;
+	cmd->param_id    = __cpu_to_le32(id);
+	cmd->param_value = __cpu_to_le32(value);
+
+	ath10k_dbg(ATH10K_DBG_WMI, "wmi pdev set param %d value %d\n",
+		   id, value);
+	return ath10k_wmi_cmd_send(ar, skb, WMI_PDEV_SET_PARAM_CMDID);
+}
+
+int ath10k_wmi_cmd_init(struct ath10k *ar)
+{
+	struct wmi_init_cmd *cmd;
+	struct sk_buff *buf;
+	struct wmi_resource_config config = {};
+	u32 val;
+
+	config.num_vdevs = __cpu_to_le32(TARGET_NUM_VDEVS);
+	config.num_peers = __cpu_to_le32(TARGET_NUM_PEERS + TARGET_NUM_VDEVS);
+	config.num_offload_peers = __cpu_to_le32(TARGET_NUM_OFFLOAD_PEERS);
+
+	config.num_offload_reorder_bufs =
+		__cpu_to_le32(TARGET_NUM_OFFLOAD_REORDER_BUFS);
+
+	config.num_peer_keys = __cpu_to_le32(TARGET_NUM_PEER_KEYS);
+	config.num_tids = __cpu_to_le32(TARGET_NUM_TIDS);
+	config.ast_skid_limit = __cpu_to_le32(TARGET_AST_SKID_LIMIT);
+	config.tx_chain_mask = __cpu_to_le32(TARGET_TX_CHAIN_MASK);
+	config.rx_chain_mask = __cpu_to_le32(TARGET_RX_CHAIN_MASK);
+	config.rx_timeout_pri_vo = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
+	config.rx_timeout_pri_vi = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
+	config.rx_timeout_pri_be = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
+	config.rx_timeout_pri_bk = __cpu_to_le32(TARGET_RX_TIMEOUT_HI_PRI);
+	config.rx_decap_mode = __cpu_to_le32(TARGET_RX_DECAP_MODE);
+
+	config.scan_max_pending_reqs =
+		__cpu_to_le32(TARGET_SCAN_MAX_PENDING_REQS);
+
+	config.bmiss_offload_max_vdev =
+		__cpu_to_le32(TARGET_BMISS_OFFLOAD_MAX_VDEV);
+
+	config.roam_offload_max_vdev =
+		__cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_VDEV);
+
+	config.roam_offload_max_ap_profiles =
+		__cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_AP_PROFILES);
+
+	config.num_mcast_groups = __cpu_to_le32(TARGET_NUM_MCAST_GROUPS);
+	config.num_mcast_table_elems =
+		__cpu_to_le32(TARGET_NUM_MCAST_TABLE_ELEMS);
+
+	config.mcast2ucast_mode = __cpu_to_le32(TARGET_MCAST2UCAST_MODE);
+	config.tx_dbg_log_size = __cpu_to_le32(TARGET_TX_DBG_LOG_SIZE);
+	config.num_wds_entries = __cpu_to_le32(TARGET_NUM_WDS_ENTRIES);
+	config.dma_burst_size = __cpu_to_le32(TARGET_DMA_BURST_SIZE);
+	config.mac_aggr_delim = __cpu_to_le32(TARGET_MAC_AGGR_DELIM);
+
+	val = TARGET_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK;
+	config.rx_skip_defrag_timeout_dup_detection_check = __cpu_to_le32(val);
+
+	config.vow_config = __cpu_to_le32(TARGET_VOW_CONFIG);
+
+	config.gtk_offload_max_vdev =
+		__cpu_to_le32(TARGET_GTK_OFFLOAD_MAX_VDEV);
+
+	config.num_msdu_desc = __cpu_to_le32(TARGET_NUM_MSDU_DESC);
+	config.max_frag_entries = __cpu_to_le32(TARGET_MAX_FRAG_ENTRIES);
+
+	buf = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!buf)
+		return -ENOMEM;
+
+	cmd = (struct wmi_init_cmd *)buf->data;
+	cmd->num_host_mem_chunks = 0;
+	memcpy(&cmd->resource_config, &config, sizeof(config));
+
+	ath10k_dbg(ATH10K_DBG_WMI, "wmi init\n");
+	return ath10k_wmi_cmd_send(ar, buf, WMI_INIT_CMDID);
+}
+
+static int ath10k_wmi_start_scan_calc_len(const struct wmi_start_scan_arg *arg)
+{
+	int len;
+
+	len = sizeof(struct wmi_start_scan_cmd);
+
+	if (arg->ie_len) {
+		if (!arg->ie)
+			return -EINVAL;
+		if (arg->ie_len > WLAN_SCAN_PARAMS_MAX_IE_LEN)
+			return -EINVAL;
+
+		len += sizeof(struct wmi_ie_data);
+		len += roundup(arg->ie_len, 4);
+	}
+
+	if (arg->n_channels) {
+		if (!arg->channels)
+			return -EINVAL;
+		if (arg->n_channels > ARRAY_SIZE(arg->channels))
+			return -EINVAL;
+
+		len += sizeof(struct wmi_chan_list);
+		len += sizeof(__le32) * arg->n_channels;
+	}
+
+	if (arg->n_ssids) {
+		if (!arg->ssids)
+			return -EINVAL;
+		if (arg->n_ssids > WLAN_SCAN_PARAMS_MAX_SSID)
+			return -EINVAL;
+
+		len += sizeof(struct wmi_ssid_list);
+		len += sizeof(struct wmi_ssid) * arg->n_ssids;
+	}
+
+	if (arg->n_bssids) {
+		if (!arg->bssids)
+			return -EINVAL;
+		if (arg->n_bssids > WLAN_SCAN_PARAMS_MAX_BSSID)
+			return -EINVAL;
+
+		len += sizeof(struct wmi_bssid_list);
+		len += sizeof(struct wmi_mac_addr) * arg->n_bssids;
+	}
+
+	return len;
+}
+
+int ath10k_wmi_start_scan(struct ath10k *ar,
+			  const struct wmi_start_scan_arg *arg)
+{
+	struct wmi_start_scan_cmd *cmd;
+	struct sk_buff *skb;
+	struct wmi_ie_data *ie;
+	struct wmi_chan_list *channels;
+	struct wmi_ssid_list *ssids;
+	struct wmi_bssid_list *bssids;
+	u32 scan_id;
+	u32 scan_req_id;
+	int off;
+	int len = 0;
+	int i;
+
+	len = ath10k_wmi_start_scan_calc_len(arg);
+	if (len < 0)
+		return len; /* len contains error code here */
+
+	skb = ath10k_wmi_alloc_skb(len);
+	if (!skb)
+		return -ENOMEM;
+
+	scan_id  = WMI_HOST_SCAN_REQ_ID_PREFIX;
+	scan_id |= arg->scan_id;
+
+	scan_req_id  = WMI_HOST_SCAN_REQUESTOR_ID_PREFIX;
+	scan_req_id |= arg->scan_req_id;
+
+	cmd = (struct wmi_start_scan_cmd *)skb->data;
+	cmd->scan_id            = __cpu_to_le32(scan_id);
+	cmd->scan_req_id        = __cpu_to_le32(scan_req_id);
+	cmd->vdev_id            = __cpu_to_le32(arg->vdev_id);
+	cmd->scan_priority      = __cpu_to_le32(arg->scan_priority);
+	cmd->notify_scan_events = __cpu_to_le32(arg->notify_scan_events);
+	cmd->dwell_time_active  = __cpu_to_le32(arg->dwell_time_active);
+	cmd->dwell_time_passive = __cpu_to_le32(arg->dwell_time_passive);
+	cmd->min_rest_time      = __cpu_to_le32(arg->min_rest_time);
+	cmd->max_rest_time      = __cpu_to_le32(arg->max_rest_time);
+	cmd->repeat_probe_time  = __cpu_to_le32(arg->repeat_probe_time);
+	cmd->probe_spacing_time = __cpu_to_le32(arg->probe_spacing_time);
+	cmd->idle_time          = __cpu_to_le32(arg->idle_time);
+	cmd->max_scan_time      = __cpu_to_le32(arg->max_scan_time);
+	cmd->probe_delay        = __cpu_to_le32(arg->probe_delay);
+	cmd->scan_ctrl_flags    = __cpu_to_le32(arg->scan_ctrl_flags);
+
+	/* TLV list starts after fields included in the struct */
+	off = sizeof(*cmd);
+
+	if (arg->n_channels) {
+		channels = (void *)skb->data + off;
+		channels->tag = __cpu_to_le32(WMI_CHAN_LIST_TAG);
+		channels->num_chan = __cpu_to_le32(arg->n_channels);
+
+		for (i = 0; i < arg->n_channels; i++)
+			channels->channel_list[i] =
+				__cpu_to_le32(arg->channels[i]);
+
+		off += sizeof(*channels);
+		off += sizeof(__le32) * arg->n_channels;
+	}
+
+	if (arg->n_ssids) {
+		ssids = (void *)skb->data + off;
+		ssids->tag = __cpu_to_le32(WMI_SSID_LIST_TAG);
+		ssids->num_ssids = __cpu_to_le32(arg->n_ssids);
+
+		for (i = 0; i < arg->n_ssids; i++) {
+			ssids->ssids[i].ssid_len =
+				__cpu_to_le32(arg->ssids[i].len);
+			memcpy(&ssids->ssids[i].ssid,
+			       arg->ssids[i].ssid,
+			       arg->ssids[i].len);
+		}
+
+		off += sizeof(*ssids);
+		off += sizeof(struct wmi_ssid) * arg->n_ssids;
+	}
+
+	if (arg->n_bssids) {
+		bssids = (void *)skb->data + off;
+		bssids->tag = __cpu_to_le32(WMI_BSSID_LIST_TAG);
+		bssids->num_bssid = __cpu_to_le32(arg->n_bssids);
+
+		for (i = 0; i < arg->n_bssids; i++)
+			memcpy(&bssids->bssid_list[i],
+			       arg->bssids[i].bssid,
+			       ETH_ALEN);
+
+		off += sizeof(*bssids);
+		off += sizeof(struct wmi_mac_addr) * arg->n_bssids;
+	}
+
+	if (arg->ie_len) {
+		ie = (void *)skb->data + off;
+		ie->tag = __cpu_to_le32(WMI_IE_TAG);
+		ie->ie_len = __cpu_to_le32(arg->ie_len);
+		memcpy(ie->ie_data, arg->ie, arg->ie_len);
+
+		off += sizeof(*ie);
+		off += roundup(arg->ie_len, 4);
+	}
+
+	if (off != skb->len) {
+		dev_kfree_skb(skb);
+		return -EINVAL;
+	}
+
+	ath10k_dbg(ATH10K_DBG_WMI, "wmi start scan\n");
+	return ath10k_wmi_cmd_send(ar, skb, WMI_START_SCAN_CMDID);
+}
+
+void ath10k_wmi_start_scan_init(struct ath10k *ar,
+				struct wmi_start_scan_arg *arg)
+{
+	/* setup commonly used values */
+	arg->scan_req_id = 1;
+	arg->scan_priority = WMI_SCAN_PRIORITY_LOW;
+	arg->dwell_time_active = 50;
+	arg->dwell_time_passive = 150;
+	arg->min_rest_time = 50;
+	arg->max_rest_time = 500;
+	arg->repeat_probe_time = 0;
+	arg->probe_spacing_time = 0;
+	arg->idle_time = 0;
+	arg->max_scan_time = 5000;
+	arg->probe_delay = 5;
+	arg->notify_scan_events = WMI_SCAN_EVENT_STARTED
+		| WMI_SCAN_EVENT_COMPLETED
+		| WMI_SCAN_EVENT_BSS_CHANNEL
+		| WMI_SCAN_EVENT_FOREIGN_CHANNEL
+		| WMI_SCAN_EVENT_DEQUEUED;
+	arg->scan_ctrl_flags |= WMI_SCAN_ADD_OFDM_RATES;
+	arg->scan_ctrl_flags |= WMI_SCAN_CHAN_STAT_EVENT;
+	arg->n_bssids = 1;
+	arg->bssids[0].bssid = "\xFF\xFF\xFF\xFF\xFF\xFF";
+}
+
+int ath10k_wmi_stop_scan(struct ath10k *ar, const struct wmi_stop_scan_arg *arg)
+{
+	struct wmi_stop_scan_cmd *cmd;
+	struct sk_buff *skb;
+	u32 scan_id;
+	u32 req_id;
+
+	if (arg->req_id > 0xFFF)
+		return -EINVAL;
+	if (arg->req_type == WMI_SCAN_STOP_ONE && arg->u.scan_id > 0xFFF)
+		return -EINVAL;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	scan_id = arg->u.scan_id;
+	scan_id |= WMI_HOST_SCAN_REQ_ID_PREFIX;
+
+	req_id = arg->req_id;
+	req_id |= WMI_HOST_SCAN_REQUESTOR_ID_PREFIX;
+
+	cmd = (struct wmi_stop_scan_cmd *)skb->data;
+	cmd->req_type    = __cpu_to_le32(arg->req_type);
+	cmd->vdev_id     = __cpu_to_le32(arg->u.vdev_id);
+	cmd->scan_id     = __cpu_to_le32(scan_id);
+	cmd->scan_req_id = __cpu_to_le32(req_id);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi stop scan reqid %d req_type %d vdev/scan_id %d\n",
+		   arg->req_id, arg->req_type, arg->u.scan_id);
+	return ath10k_wmi_cmd_send(ar, skb, WMI_STOP_SCAN_CMDID);
+}
+
+int ath10k_wmi_vdev_create(struct ath10k *ar, u32 vdev_id,
+			   enum wmi_vdev_type type,
+			   enum wmi_vdev_subtype subtype,
+			   const u8 macaddr[ETH_ALEN])
+{
+	struct wmi_vdev_create_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_vdev_create_cmd *)skb->data;
+	cmd->vdev_id      = __cpu_to_le32(vdev_id);
+	cmd->vdev_type    = __cpu_to_le32(type);
+	cmd->vdev_subtype = __cpu_to_le32(subtype);
+	memcpy(cmd->vdev_macaddr.addr, macaddr, ETH_ALEN);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "WMI vdev create: id %d type %d subtype %d macaddr %pM\n",
+		   vdev_id, type, subtype, macaddr);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_CREATE_CMDID);
+}
+
+int ath10k_wmi_vdev_delete(struct ath10k *ar, u32 vdev_id)
+{
+	struct wmi_vdev_delete_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_vdev_delete_cmd *)skb->data;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "WMI vdev delete id %d\n", vdev_id);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_DELETE_CMDID);
+}
+
+static int ath10k_wmi_vdev_start_restart(struct ath10k *ar,
+				const struct wmi_vdev_start_request_arg *arg,
+				enum wmi_cmd_id cmd_id)
+{
+	struct wmi_vdev_start_request_cmd *cmd;
+	struct sk_buff *skb;
+	const char *cmdname;
+	u32 flags = 0;
+
+	if (cmd_id != WMI_VDEV_START_REQUEST_CMDID &&
+	    cmd_id != WMI_VDEV_RESTART_REQUEST_CMDID)
+		return -EINVAL;
+	if (WARN_ON(arg->ssid && arg->ssid_len == 0))
+		return -EINVAL;
+	if (WARN_ON(arg->hidden_ssid && !arg->ssid))
+		return -EINVAL;
+	if (WARN_ON(arg->ssid_len > sizeof(cmd->ssid.ssid)))
+		return -EINVAL;
+
+	if (cmd_id == WMI_VDEV_START_REQUEST_CMDID)
+		cmdname = "start";
+	else if (cmd_id == WMI_VDEV_RESTART_REQUEST_CMDID)
+		cmdname = "restart";
+	else
+		return -EINVAL; /* should not happen, we already check cmd_id */
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	if (arg->hidden_ssid)
+		flags |= WMI_VDEV_START_HIDDEN_SSID;
+	if (arg->pmf_enabled)
+		flags |= WMI_VDEV_START_PMF_ENABLED;
+
+	cmd = (struct wmi_vdev_start_request_cmd *)skb->data;
+	cmd->vdev_id         = __cpu_to_le32(arg->vdev_id);
+	cmd->disable_hw_ack  = __cpu_to_le32(arg->disable_hw_ack);
+	cmd->beacon_interval = __cpu_to_le32(arg->bcn_intval);
+	cmd->dtim_period     = __cpu_to_le32(arg->dtim_period);
+	cmd->flags           = __cpu_to_le32(flags);
+	cmd->bcn_tx_rate     = __cpu_to_le32(arg->bcn_tx_rate);
+	cmd->bcn_tx_power    = __cpu_to_le32(arg->bcn_tx_power);
+
+	if (arg->ssid) {
+		cmd->ssid.ssid_len = __cpu_to_le32(arg->ssid_len);
+		memcpy(cmd->ssid.ssid, arg->ssid, arg->ssid_len);
+	}
+
+	cmd->chan.mhz = __cpu_to_le32(arg->channel.freq);
+
+	cmd->chan.band_center_freq1 =
+		__cpu_to_le32(arg->channel.band_center_freq1);
+
+	cmd->chan.mode = arg->channel.mode;
+	cmd->chan.min_power = arg->channel.min_power;
+	cmd->chan.max_power = arg->channel.max_power;
+	cmd->chan.reg_power = arg->channel.max_reg_power;
+	cmd->chan.reg_classid = arg->channel.reg_class_id;
+	cmd->chan.antenna_max = arg->channel.max_antenna_gain;
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi vdev %s id 0x%x freq %d, mode %d, ch_flags: 0x%0X,"
+		   "max_power: %d\n", cmdname, arg->vdev_id, arg->channel.freq,
+		   arg->channel.mode, flags, arg->channel.max_power);
+
+	return ath10k_wmi_cmd_send(ar, skb, cmd_id);
+}
+
+int ath10k_wmi_vdev_start(struct ath10k *ar,
+			  const struct wmi_vdev_start_request_arg *arg)
+{
+	return ath10k_wmi_vdev_start_restart(ar, arg,
+					     WMI_VDEV_START_REQUEST_CMDID);
+}
+
+int ath10k_wmi_vdev_restart(struct ath10k *ar,
+		     const struct wmi_vdev_start_request_arg *arg)
+{
+	return ath10k_wmi_vdev_start_restart(ar, arg,
+					     WMI_VDEV_RESTART_REQUEST_CMDID);
+}
+
+int ath10k_wmi_vdev_stop(struct ath10k *ar, u32 vdev_id)
+{
+	struct wmi_vdev_stop_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_vdev_stop_cmd *)skb->data;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+
+	ath10k_dbg(ATH10K_DBG_WMI, "wmi vdev stop id 0x%x\n", vdev_id);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_STOP_CMDID);
+}
+
+int ath10k_wmi_vdev_up(struct ath10k *ar, u32 vdev_id, u32 aid, const u8 *bssid)
+{
+	struct wmi_vdev_up_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_vdev_up_cmd *)skb->data;
+	cmd->vdev_id       = __cpu_to_le32(vdev_id);
+	cmd->vdev_assoc_id = __cpu_to_le32(aid);
+	memcpy(&cmd->vdev_bssid.addr, bssid, 6);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi mgmt vdev up id 0x%x assoc id %d bssid %pM\n",
+		   vdev_id, aid, bssid);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_UP_CMDID);
+}
+
+int ath10k_wmi_vdev_down(struct ath10k *ar, u32 vdev_id)
+{
+	struct wmi_vdev_down_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_vdev_down_cmd *)skb->data;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi mgmt vdev down id 0x%x\n", vdev_id);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_DOWN_CMDID);
+}
+
+int ath10k_wmi_vdev_set_param(struct ath10k *ar, u32 vdev_id,
+			      enum wmi_vdev_param param_id, u32 param_value)
+{
+	struct wmi_vdev_set_param_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_vdev_set_param_cmd *)skb->data;
+	cmd->vdev_id     = __cpu_to_le32(vdev_id);
+	cmd->param_id    = __cpu_to_le32(param_id);
+	cmd->param_value = __cpu_to_le32(param_value);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi vdev id 0x%x set param %d value %d\n",
+		   vdev_id, param_id, param_value);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_SET_PARAM_CMDID);
+}
+
+int ath10k_wmi_vdev_install_key(struct ath10k *ar,
+				const struct wmi_vdev_install_key_arg *arg)
+{
+	struct wmi_vdev_install_key_cmd *cmd;
+	struct sk_buff *skb;
+
+	if (arg->key_cipher == WMI_CIPHER_NONE && arg->key_data != NULL)
+		return -EINVAL;
+	if (arg->key_cipher != WMI_CIPHER_NONE && arg->key_data == NULL)
+		return -EINVAL;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd) + arg->key_len);
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_vdev_install_key_cmd *)skb->data;
+	cmd->vdev_id       = __cpu_to_le32(arg->vdev_id);
+	cmd->key_idx       = __cpu_to_le32(arg->key_idx);
+	cmd->key_flags     = __cpu_to_le32(arg->key_flags);
+	cmd->key_cipher    = __cpu_to_le32(arg->key_cipher);
+	cmd->key_len       = __cpu_to_le32(arg->key_len);
+	cmd->key_txmic_len = __cpu_to_le32(arg->key_txmic_len);
+	cmd->key_rxmic_len = __cpu_to_le32(arg->key_rxmic_len);
+
+	if (arg->macaddr)
+		memcpy(cmd->peer_macaddr.addr, arg->macaddr, ETH_ALEN);
+	if (arg->key_data)
+		memcpy(cmd->key_data, arg->key_data, arg->key_len);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_VDEV_INSTALL_KEY_CMDID);
+}
+
+int ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id,
+			   const u8 peer_addr[ETH_ALEN])
+{
+	struct wmi_peer_create_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_peer_create_cmd *)skb->data;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+	memcpy(cmd->peer_macaddr.addr, peer_addr, ETH_ALEN);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi peer create vdev_id %d peer_addr %pM\n",
+		   vdev_id, peer_addr);
+	return ath10k_wmi_cmd_send(ar, skb, WMI_PEER_CREATE_CMDID);
+}
+
+int ath10k_wmi_peer_delete(struct ath10k *ar, u32 vdev_id,
+			   const u8 peer_addr[ETH_ALEN])
+{
+	struct wmi_peer_delete_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_peer_delete_cmd *)skb->data;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+	memcpy(cmd->peer_macaddr.addr, peer_addr, ETH_ALEN);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi peer delete vdev_id %d peer_addr %pM\n",
+		   vdev_id, peer_addr);
+	return ath10k_wmi_cmd_send(ar, skb, WMI_PEER_DELETE_CMDID);
+}
+
+int ath10k_wmi_peer_flush(struct ath10k *ar, u32 vdev_id,
+			  const u8 peer_addr[ETH_ALEN], u32 tid_bitmap)
+{
+	struct wmi_peer_flush_tids_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_peer_flush_tids_cmd *)skb->data;
+	cmd->vdev_id         = __cpu_to_le32(vdev_id);
+	cmd->peer_tid_bitmap = __cpu_to_le32(tid_bitmap);
+	memcpy(cmd->peer_macaddr.addr, peer_addr, ETH_ALEN);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi peer flush vdev_id %d peer_addr %pM tids %08x\n",
+		   vdev_id, peer_addr, tid_bitmap);
+	return ath10k_wmi_cmd_send(ar, skb, WMI_PEER_FLUSH_TIDS_CMDID);
+}
+
+int ath10k_wmi_peer_set_param(struct ath10k *ar, u32 vdev_id,
+			      const u8 *peer_addr, enum wmi_peer_param param_id,
+			      u32 param_value)
+{
+	struct wmi_peer_set_param_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_peer_set_param_cmd *)skb->data;
+	cmd->vdev_id     = __cpu_to_le32(vdev_id);
+	cmd->param_id    = __cpu_to_le32(param_id);
+	cmd->param_value = __cpu_to_le32(param_value);
+	memcpy(&cmd->peer_macaddr.addr, peer_addr, 6);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi vdev %d peer 0x%pM set param %d value %d\n",
+		   vdev_id, peer_addr, param_id, param_value);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_PEER_SET_PARAM_CMDID);
+}
+
+int ath10k_wmi_set_psmode(struct ath10k *ar, u32 vdev_id,
+			  enum wmi_sta_ps_mode psmode)
+{
+	struct wmi_sta_powersave_mode_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_sta_powersave_mode_cmd *)skb->data;
+	cmd->vdev_id     = __cpu_to_le32(vdev_id);
+	cmd->sta_ps_mode = __cpu_to_le32(psmode);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi set powersave id 0x%x mode %d\n",
+		   vdev_id, psmode);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_STA_POWERSAVE_MODE_CMDID);
+}
+
+int ath10k_wmi_set_sta_ps_param(struct ath10k *ar, u32 vdev_id,
+				enum wmi_sta_powersave_param param_id,
+				u32 value)
+{
+	struct wmi_sta_powersave_param_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_sta_powersave_param_cmd *)skb->data;
+	cmd->vdev_id     = __cpu_to_le32(vdev_id);
+	cmd->param_id    = __cpu_to_le32(param_id);
+	cmd->param_value = __cpu_to_le32(value);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi sta ps param vdev_id 0x%x param %d value %d\n",
+		   vdev_id, param_id, value);
+	return ath10k_wmi_cmd_send(ar, skb, WMI_STA_POWERSAVE_PARAM_CMDID);
+}
+
+int ath10k_wmi_set_ap_ps_param(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+			       enum wmi_ap_ps_peer_param param_id, u32 value)
+{
+	struct wmi_ap_ps_peer_cmd *cmd;
+	struct sk_buff *skb;
+
+	if (!mac)
+		return -EINVAL;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_ap_ps_peer_cmd *)skb->data;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+	cmd->param_id = __cpu_to_le32(param_id);
+	cmd->param_value = __cpu_to_le32(value);
+	memcpy(&cmd->peer_macaddr, mac, ETH_ALEN);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi ap ps param vdev_id 0x%X param %d value %d mac_addr %pM\n",
+		   vdev_id, param_id, value, mac);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_AP_PS_PEER_PARAM_CMDID);
+}
+
+int ath10k_wmi_scan_chan_list(struct ath10k *ar,
+			      const struct wmi_scan_chan_list_arg *arg)
+{
+	struct wmi_scan_chan_list_cmd *cmd;
+	struct sk_buff *skb;
+	struct wmi_channel_arg *ch;
+	struct wmi_channel *ci;
+	int len;
+	int i;
+
+	len = sizeof(*cmd) + arg->n_channels * sizeof(struct wmi_channel);
+
+	skb = ath10k_wmi_alloc_skb(len);
+	if (!skb)
+		return -EINVAL;
+
+	cmd = (struct wmi_scan_chan_list_cmd *)skb->data;
+	cmd->num_scan_chans = __cpu_to_le32(arg->n_channels);
+
+	for (i = 0; i < arg->n_channels; i++) {
+		u32 flags = 0;
+
+		ch = &arg->channels[i];
+		ci = &cmd->chan_info[i];
+
+		if (ch->passive)
+			flags |= WMI_CHAN_FLAG_PASSIVE;
+		if (ch->allow_ibss)
+			flags |= WMI_CHAN_FLAG_ADHOC_ALLOWED;
+		if (ch->allow_ht)
+			flags |= WMI_CHAN_FLAG_ALLOW_HT;
+		if (ch->allow_vht)
+			flags |= WMI_CHAN_FLAG_ALLOW_VHT;
+		if (ch->ht40plus)
+			flags |= WMI_CHAN_FLAG_HT40_PLUS;
+
+		ci->mhz               = __cpu_to_le32(ch->freq);
+		ci->band_center_freq1 = __cpu_to_le32(ch->freq);
+		ci->band_center_freq2 = 0;
+		ci->min_power         = ch->min_power;
+		ci->max_power         = ch->max_power;
+		ci->reg_power         = ch->max_reg_power;
+		ci->antenna_max       = ch->max_antenna_gain;
+		ci->antenna_max       = 0;
+
+		/* mode & flags share storage */
+		ci->mode              = ch->mode;
+		ci->flags            |= __cpu_to_le32(flags);
+	}
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_SCAN_CHAN_LIST_CMDID);
+}
+
+int ath10k_wmi_peer_assoc(struct ath10k *ar,
+			  const struct wmi_peer_assoc_complete_arg *arg)
+{
+	struct wmi_peer_assoc_complete_cmd *cmd;
+	struct sk_buff *skb;
+
+	if (arg->peer_mpdu_density > 16)
+		return -EINVAL;
+	if (arg->peer_legacy_rates.num_rates > MAX_SUPPORTED_RATES)
+		return -EINVAL;
+	if (arg->peer_ht_rates.num_rates > MAX_SUPPORTED_RATES)
+		return -EINVAL;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_peer_assoc_complete_cmd *)skb->data;
+	cmd->vdev_id            = __cpu_to_le32(arg->vdev_id);
+	cmd->peer_new_assoc     = __cpu_to_le32(arg->peer_reassoc ? 0 : 1);
+	cmd->peer_associd       = __cpu_to_le32(arg->peer_aid);
+	cmd->peer_flags         = __cpu_to_le32(arg->peer_flags);
+	cmd->peer_caps          = __cpu_to_le32(arg->peer_caps);
+	cmd->peer_listen_intval = __cpu_to_le32(arg->peer_listen_intval);
+	cmd->peer_ht_caps       = __cpu_to_le32(arg->peer_ht_caps);
+	cmd->peer_max_mpdu      = __cpu_to_le32(arg->peer_max_mpdu);
+	cmd->peer_mpdu_density  = __cpu_to_le32(arg->peer_mpdu_density);
+	cmd->peer_rate_caps     = __cpu_to_le32(arg->peer_rate_caps);
+	cmd->peer_nss           = __cpu_to_le32(arg->peer_num_spatial_streams);
+	cmd->peer_vht_caps      = __cpu_to_le32(arg->peer_vht_caps);
+	cmd->peer_phymode       = __cpu_to_le32(arg->peer_phymode);
+
+	memcpy(cmd->peer_macaddr.addr, arg->addr, ETH_ALEN);
+
+	cmd->peer_legacy_rates.num_rates =
+		__cpu_to_le32(arg->peer_legacy_rates.num_rates);
+	memcpy(cmd->peer_legacy_rates.rates, arg->peer_legacy_rates.rates,
+	       arg->peer_legacy_rates.num_rates);
+
+	cmd->peer_ht_rates.num_rates =
+		__cpu_to_le32(arg->peer_ht_rates.num_rates);
+	memcpy(cmd->peer_ht_rates.rates, arg->peer_ht_rates.rates,
+	       arg->peer_ht_rates.num_rates);
+
+	cmd->peer_vht_rates.rx_max_rate =
+		__cpu_to_le32(arg->peer_vht_rates.rx_max_rate);
+	cmd->peer_vht_rates.rx_mcs_set =
+		__cpu_to_le32(arg->peer_vht_rates.rx_mcs_set);
+	cmd->peer_vht_rates.tx_max_rate =
+		__cpu_to_le32(arg->peer_vht_rates.tx_max_rate);
+	cmd->peer_vht_rates.tx_mcs_set =
+		__cpu_to_le32(arg->peer_vht_rates.tx_mcs_set);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_PEER_ASSOC_CMDID);
+}
+
+int ath10k_wmi_beacon_send(struct ath10k *ar, const struct wmi_bcn_tx_arg *arg)
+{
+	struct wmi_bcn_tx_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd) + arg->bcn_len);
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_bcn_tx_cmd *)skb->data;
+	cmd->hdr.vdev_id  = __cpu_to_le32(arg->vdev_id);
+	cmd->hdr.tx_rate  = __cpu_to_le32(arg->tx_rate);
+	cmd->hdr.tx_power = __cpu_to_le32(arg->tx_power);
+	cmd->hdr.bcn_len  = __cpu_to_le32(arg->bcn_len);
+	memcpy(cmd->bcn, arg->bcn, arg->bcn_len);
+
+	return ath10k_wmi_cmd_send(ar, skb, WMI_BCN_TX_CMDID);
+}
+
+static void ath10k_wmi_pdev_set_wmm_param(struct wmi_wmm_params *params,
+					  const struct wmi_wmm_params_arg *arg)
+{
+	params->cwmin  = __cpu_to_le32(arg->cwmin);
+	params->cwmax  = __cpu_to_le32(arg->cwmax);
+	params->aifs   = __cpu_to_le32(arg->aifs);
+	params->txop   = __cpu_to_le32(arg->txop);
+	params->acm    = __cpu_to_le32(arg->acm);
+	params->no_ack = __cpu_to_le32(arg->no_ack);
+}
+
+int ath10k_wmi_pdev_set_wmm_params(struct ath10k *ar,
+			const struct wmi_pdev_set_wmm_params_arg *arg)
+{
+	struct wmi_pdev_set_wmm_params *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_pdev_set_wmm_params *)skb->data;
+	ath10k_wmi_pdev_set_wmm_param(&cmd->ac_be, &arg->ac_be);
+	ath10k_wmi_pdev_set_wmm_param(&cmd->ac_bk, &arg->ac_bk);
+	ath10k_wmi_pdev_set_wmm_param(&cmd->ac_vi, &arg->ac_vi);
+	ath10k_wmi_pdev_set_wmm_param(&cmd->ac_vo, &arg->ac_vo);
+
+	ath10k_dbg(ATH10K_DBG_WMI, "wmi pdev set wmm params\n");
+	return ath10k_wmi_cmd_send(ar, skb, WMI_PDEV_SET_WMM_PARAMS_CMDID);
+}
+
+int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id)
+{
+	struct wmi_request_stats_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_request_stats_cmd *)skb->data;
+	cmd->stats_id = __cpu_to_le32(stats_id);
+
+	ath10k_dbg(ATH10K_DBG_WMI, "wmi request stats %d\n", (int)stats_id);
+	return ath10k_wmi_cmd_send(ar, skb, WMI_REQUEST_STATS_CMDID);
+}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
new file mode 100644
index 000000000000..9555f5a0e041
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -0,0 +1,3052 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _WMI_H_
+#define _WMI_H_
+
+#include <linux/types.h>
+#include <net/mac80211.h>
+
+/*
+ * This file specifies the WMI interface for the Unified Software
+ * Architecture.
+ *
+ * It includes definitions of all the commands and events. Commands are
+ * messages from the host to the target. Events and Replies are messages
+ * from the target to the host.
+ *
+ * Ownership of correctness in regards to WMI commands belongs to the host
+ * driver and the target is not required to validate parameters for value,
+ * proper range, or any other checking.
+ *
+ * Guidelines for extending this interface are below.
+ *
+ * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
+ *
+ * 2. Use ONLY u32 type for defining member variables within WMI
+ *    command/event structures. Do not use u8, u16, bool or
+ *    enum types within these structures.
+ *
+ * 3. DO NOT define bit fields within structures. Implement bit fields
+ *    using masks if necessary. Do not use the programming language's bit
+ *    field definition.
+ *
+ * 4. Define macros for encode/decode of u8, u16 fields within
+ *    the u32 variables. Use these macros for set/get of these fields.
+ *    Try to use this to optimize the structure without bloating it with
+ *    u32 variables for every lower sized field.
+ *
+ * 5. Do not use PACK/UNPACK attributes for the structures as each member
+ *    variable is already 4-byte aligned by virtue of being a u32
+ *    type.
+ *
+ * 6. Comment each parameter part of the WMI command/event structure by
+ *    using the 2 stars at the begining of C comment instead of one star to
+ *    enable HTML document generation using Doxygen.
+ *
+ */
+
+/* Control Path */
+struct wmi_cmd_hdr {
+	__le32 cmd_id;
+} __packed;
+
+#define WMI_CMD_HDR_CMD_ID_MASK   0x00FFFFFF
+#define WMI_CMD_HDR_CMD_ID_LSB    0
+#define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
+#define WMI_CMD_HDR_PLT_PRIV_LSB  24
+
+#define HTC_PROTOCOL_VERSION    0x0002
+#define WMI_PROTOCOL_VERSION    0x0002
+
+enum wmi_service_id {
+	WMI_SERVICE_BEACON_OFFLOAD = 0,   /* beacon offload */
+	WMI_SERVICE_SCAN_OFFLOAD,	  /* scan offload */
+	WMI_SERVICE_ROAM_OFFLOAD,	  /* roam offload */
+	WMI_SERVICE_BCN_MISS_OFFLOAD,     /* beacon miss offload */
+	WMI_SERVICE_STA_PWRSAVE,	  /* fake sleep + basic power save */
+	WMI_SERVICE_STA_ADVANCED_PWRSAVE, /* uapsd, pspoll, force sleep */
+	WMI_SERVICE_AP_UAPSD,		  /* uapsd on AP */
+	WMI_SERVICE_AP_DFS,		  /* DFS on AP */
+	WMI_SERVICE_11AC,		  /* supports 11ac */
+	WMI_SERVICE_BLOCKACK,	/* Supports triggering ADDBA/DELBA from host*/
+	WMI_SERVICE_PHYERR,		  /* PHY error */
+	WMI_SERVICE_BCN_FILTER,		  /* Beacon filter support */
+	WMI_SERVICE_RTT,		  /* RTT (round trip time) support */
+	WMI_SERVICE_RATECTRL,		  /* Rate-control */
+	WMI_SERVICE_WOW,		  /* WOW Support */
+	WMI_SERVICE_RATECTRL_CACHE,       /* Rate-control caching */
+	WMI_SERVICE_IRAM_TIDS,            /* TIDs in IRAM */
+	WMI_SERVICE_ARPNS_OFFLOAD,	  /* ARP NS Offload support */
+	WMI_SERVICE_NLO,		  /* Network list offload service */
+	WMI_SERVICE_GTK_OFFLOAD,	  /* GTK offload */
+	WMI_SERVICE_SCAN_SCH,		  /* Scan Scheduler Service */
+	WMI_SERVICE_CSA_OFFLOAD,	  /* CSA offload service */
+	WMI_SERVICE_CHATTER,		  /* Chatter service */
+	WMI_SERVICE_COEX_FREQAVOID,	  /* FW report freq range to avoid */
+	WMI_SERVICE_PACKET_POWER_SAVE,	  /* packet power save service */
+	WMI_SERVICE_FORCE_FW_HANG,        /* To test fw recovery mechanism */
+	WMI_SERVICE_GPIO,                 /* GPIO service */
+	WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, /* Modulated DTIM support */
+	WMI_STA_UAPSD_BASIC_AUTO_TRIG,    /* UAPSD AC Trigger Generation  */
+	WMI_STA_UAPSD_VAR_AUTO_TRIG,      /* -do- */
+	WMI_SERVICE_STA_KEEP_ALIVE,       /* STA keep alive mechanism support */
+	WMI_SERVICE_TX_ENCAP,             /* Packet type for TX encapsulation */
+
+	WMI_SERVICE_LAST,
+	WMI_MAX_SERVICE = 64		  /* max service */
+};
+
+static inline char *wmi_service_name(int service_id)
+{
+	switch (service_id) {
+	case WMI_SERVICE_BEACON_OFFLOAD:
+		return "BEACON_OFFLOAD";
+	case WMI_SERVICE_SCAN_OFFLOAD:
+		return "SCAN_OFFLOAD";
+	case WMI_SERVICE_ROAM_OFFLOAD:
+		return "ROAM_OFFLOAD";
+	case WMI_SERVICE_BCN_MISS_OFFLOAD:
+		return "BCN_MISS_OFFLOAD";
+	case WMI_SERVICE_STA_PWRSAVE:
+		return "STA_PWRSAVE";
+	case WMI_SERVICE_STA_ADVANCED_PWRSAVE:
+		return "STA_ADVANCED_PWRSAVE";
+	case WMI_SERVICE_AP_UAPSD:
+		return "AP_UAPSD";
+	case WMI_SERVICE_AP_DFS:
+		return "AP_DFS";
+	case WMI_SERVICE_11AC:
+		return "11AC";
+	case WMI_SERVICE_BLOCKACK:
+		return "BLOCKACK";
+	case WMI_SERVICE_PHYERR:
+		return "PHYERR";
+	case WMI_SERVICE_BCN_FILTER:
+		return "BCN_FILTER";
+	case WMI_SERVICE_RTT:
+		return "RTT";
+	case WMI_SERVICE_RATECTRL:
+		return "RATECTRL";
+	case WMI_SERVICE_WOW:
+		return "WOW";
+	case WMI_SERVICE_RATECTRL_CACHE:
+		return "RATECTRL CACHE";
+	case WMI_SERVICE_IRAM_TIDS:
+		return "IRAM TIDS";
+	case WMI_SERVICE_ARPNS_OFFLOAD:
+		return "ARPNS_OFFLOAD";
+	case WMI_SERVICE_NLO:
+		return "NLO";
+	case WMI_SERVICE_GTK_OFFLOAD:
+		return "GTK_OFFLOAD";
+	case WMI_SERVICE_SCAN_SCH:
+		return "SCAN_SCH";
+	case WMI_SERVICE_CSA_OFFLOAD:
+		return "CSA_OFFLOAD";
+	case WMI_SERVICE_CHATTER:
+		return "CHATTER";
+	case WMI_SERVICE_COEX_FREQAVOID:
+		return "COEX_FREQAVOID";
+	case WMI_SERVICE_PACKET_POWER_SAVE:
+		return "PACKET_POWER_SAVE";
+	case WMI_SERVICE_FORCE_FW_HANG:
+		return "FORCE FW HANG";
+	case WMI_SERVICE_GPIO:
+		return "GPIO";
+	case WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM:
+		return "MODULATED DTIM";
+	case WMI_STA_UAPSD_BASIC_AUTO_TRIG:
+		return "BASIC UAPSD";
+	case WMI_STA_UAPSD_VAR_AUTO_TRIG:
+		return "VAR UAPSD";
+	case WMI_SERVICE_STA_KEEP_ALIVE:
+		return "STA KEEP ALIVE";
+	case WMI_SERVICE_TX_ENCAP:
+		return "TX ENCAP";
+	default:
+		return "UNKNOWN SERVICE\n";
+	}
+}
+
+
+#define WMI_SERVICE_BM_SIZE \
+	((WMI_MAX_SERVICE + sizeof(u32) - 1)/sizeof(u32))
+
+/* 2 word representation of MAC addr */
+struct wmi_mac_addr {
+	union {
+		u8 addr[6];
+		struct {
+			u32 word0;
+			u32 word1;
+		} __packed;
+	} __packed;
+} __packed;
+
+/* macro to convert MAC address from WMI word format to char array */
+#define WMI_MAC_ADDR_TO_CHAR_ARRAY(pwmi_mac_addr, c_macaddr) do { \
+	(c_macaddr)[0] =  ((pwmi_mac_addr)->word0) & 0xff; \
+	(c_macaddr)[1] = (((pwmi_mac_addr)->word0) >> 8) & 0xff; \
+	(c_macaddr)[2] = (((pwmi_mac_addr)->word0) >> 16) & 0xff; \
+	(c_macaddr)[3] = (((pwmi_mac_addr)->word0) >> 24) & 0xff; \
+	(c_macaddr)[4] =  ((pwmi_mac_addr)->word1) & 0xff; \
+	(c_macaddr)[5] = (((pwmi_mac_addr)->word1) >> 8) & 0xff; \
+	} while (0)
+
+/*
+ * wmi command groups.
+ */
+enum wmi_cmd_group {
+	/* 0 to 2 are reserved */
+	WMI_GRP_START = 0x3,
+	WMI_GRP_SCAN = WMI_GRP_START,
+	WMI_GRP_PDEV,
+	WMI_GRP_VDEV,
+	WMI_GRP_PEER,
+	WMI_GRP_MGMT,
+	WMI_GRP_BA_NEG,
+	WMI_GRP_STA_PS,
+	WMI_GRP_DFS,
+	WMI_GRP_ROAM,
+	WMI_GRP_OFL_SCAN,
+	WMI_GRP_P2P,
+	WMI_GRP_AP_PS,
+	WMI_GRP_RATE_CTRL,
+	WMI_GRP_PROFILE,
+	WMI_GRP_SUSPEND,
+	WMI_GRP_BCN_FILTER,
+	WMI_GRP_WOW,
+	WMI_GRP_RTT,
+	WMI_GRP_SPECTRAL,
+	WMI_GRP_STATS,
+	WMI_GRP_ARP_NS_OFL,
+	WMI_GRP_NLO_OFL,
+	WMI_GRP_GTK_OFL,
+	WMI_GRP_CSA_OFL,
+	WMI_GRP_CHATTER,
+	WMI_GRP_TID_ADDBA,
+	WMI_GRP_MISC,
+	WMI_GRP_GPIO,
+};
+
+#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
+#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
+
+/* Command IDs and commande events. */
+enum wmi_cmd_id {
+	WMI_INIT_CMDID = 0x1,
+
+	/* Scan specific commands */
+	WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
+	WMI_STOP_SCAN_CMDID,
+	WMI_SCAN_CHAN_LIST_CMDID,
+	WMI_SCAN_SCH_PRIO_TBL_CMDID,
+
+	/* PDEV (physical device) specific commands */
+	WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
+	WMI_PDEV_SET_CHANNEL_CMDID,
+	WMI_PDEV_SET_PARAM_CMDID,
+	WMI_PDEV_PKTLOG_ENABLE_CMDID,
+	WMI_PDEV_PKTLOG_DISABLE_CMDID,
+	WMI_PDEV_SET_WMM_PARAMS_CMDID,
+	WMI_PDEV_SET_HT_CAP_IE_CMDID,
+	WMI_PDEV_SET_VHT_CAP_IE_CMDID,
+	WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
+	WMI_PDEV_SET_QUIET_MODE_CMDID,
+	WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
+	WMI_PDEV_GET_TPC_CONFIG_CMDID,
+	WMI_PDEV_SET_BASE_MACADDR_CMDID,
+
+	/* VDEV (virtual device) specific commands */
+	WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
+	WMI_VDEV_DELETE_CMDID,
+	WMI_VDEV_START_REQUEST_CMDID,
+	WMI_VDEV_RESTART_REQUEST_CMDID,
+	WMI_VDEV_UP_CMDID,
+	WMI_VDEV_STOP_CMDID,
+	WMI_VDEV_DOWN_CMDID,
+	WMI_VDEV_SET_PARAM_CMDID,
+	WMI_VDEV_INSTALL_KEY_CMDID,
+
+	/* peer specific commands */
+	WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
+	WMI_PEER_DELETE_CMDID,
+	WMI_PEER_FLUSH_TIDS_CMDID,
+	WMI_PEER_SET_PARAM_CMDID,
+	WMI_PEER_ASSOC_CMDID,
+	WMI_PEER_ADD_WDS_ENTRY_CMDID,
+	WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
+	WMI_PEER_MCAST_GROUP_CMDID,
+
+	/* beacon/management specific commands */
+	WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
+	WMI_PDEV_SEND_BCN_CMDID,
+	WMI_BCN_TMPL_CMDID,
+	WMI_BCN_FILTER_RX_CMDID,
+	WMI_PRB_REQ_FILTER_RX_CMDID,
+	WMI_MGMT_TX_CMDID,
+	WMI_PRB_TMPL_CMDID,
+
+	/* commands to directly control BA negotiation directly from host. */
+	WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
+	WMI_ADDBA_SEND_CMDID,
+	WMI_ADDBA_STATUS_CMDID,
+	WMI_DELBA_SEND_CMDID,
+	WMI_ADDBA_SET_RESP_CMDID,
+	WMI_SEND_SINGLEAMSDU_CMDID,
+
+	/* Station power save specific config */
+	WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
+	WMI_STA_POWERSAVE_PARAM_CMDID,
+	WMI_STA_MIMO_PS_MODE_CMDID,
+
+	/** DFS-specific commands */
+	WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
+	WMI_PDEV_DFS_DISABLE_CMDID,
+
+	/* Roaming specific  commands */
+	WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
+	WMI_ROAM_SCAN_RSSI_THRESHOLD,
+	WMI_ROAM_SCAN_PERIOD,
+	WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
+	WMI_ROAM_AP_PROFILE,
+
+	/* offload scan specific commands */
+	WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
+	WMI_OFL_SCAN_REMOVE_AP_PROFILE,
+	WMI_OFL_SCAN_PERIOD,
+
+	/* P2P specific commands */
+	WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
+	WMI_P2P_DEV_SET_DISCOVERABILITY,
+	WMI_P2P_GO_SET_BEACON_IE,
+	WMI_P2P_GO_SET_PROBE_RESP_IE,
+	WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
+
+	/* AP power save specific config */
+	WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
+	WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
+
+	/* Rate-control specific commands */
+	WMI_PEER_RATE_RETRY_SCHED_CMDID =
+	WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
+
+	/* WLAN Profiling commands. */
+	WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
+	WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
+	WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
+	WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
+	WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
+
+	/* Suspend resume command Ids */
+	WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
+	WMI_PDEV_RESUME_CMDID,
+
+	/* Beacon filter commands */
+	WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
+	WMI_RMV_BCN_FILTER_CMDID,
+
+	/* WOW Specific WMI commands*/
+	WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
+	WMI_WOW_DEL_WAKE_PATTERN_CMDID,
+	WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
+	WMI_WOW_ENABLE_CMDID,
+	WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
+
+	/* RTT measurement related cmd */
+	WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
+	WMI_RTT_TSF_CMDID,
+
+	/* spectral scan commands */
+	WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
+	WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
+
+	/* F/W stats */
+	WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
+
+	/* ARP OFFLOAD REQUEST*/
+	WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
+
+	/* NS offload confid*/
+	WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
+
+	/* GTK offload Specific WMI commands*/
+	WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
+
+	/* CSA offload Specific WMI commands*/
+	WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
+	WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
+
+	/* Chatter commands*/
+	WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
+
+	/* addba specific commands */
+	WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
+	WMI_PEER_TID_DELBA_CMDID,
+
+	/* set station mimo powersave method */
+	WMI_STA_DTIM_PS_METHOD_CMDID,
+	/* Configure the Station UAPSD AC Auto Trigger Parameters */
+	WMI_STA_UAPSD_AUTO_TRIG_CMDID,
+
+	/* STA Keep alive parameter configuration,
+	   Requires WMI_SERVICE_STA_KEEP_ALIVE */
+	WMI_STA_KEEPALIVE_CMD,
+
+	/* misc command group */
+	WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
+	WMI_PDEV_UTF_CMDID,
+	WMI_DBGLOG_CFG_CMDID,
+	WMI_PDEV_QVIT_CMDID,
+	WMI_PDEV_FTM_INTG_CMDID,
+	WMI_VDEV_SET_KEEPALIVE_CMDID,
+	WMI_VDEV_GET_KEEPALIVE_CMDID,
+
+	/* GPIO Configuration */
+	WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
+	WMI_GPIO_OUTPUT_CMDID,
+};
+
+enum wmi_event_id {
+	WMI_SERVICE_READY_EVENTID = 0x1,
+	WMI_READY_EVENTID,
+
+	/* Scan specific events */
+	WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
+
+	/* PDEV specific events */
+	WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
+	WMI_CHAN_INFO_EVENTID,
+	WMI_PHYERR_EVENTID,
+
+	/* VDEV specific events */
+	WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
+	WMI_VDEV_STOPPED_EVENTID,
+	WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
+
+	/* peer specific events */
+	WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
+
+	/* beacon/mgmt specific events */
+	WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
+	WMI_HOST_SWBA_EVENTID,
+	WMI_TBTTOFFSET_UPDATE_EVENTID,
+
+	/* ADDBA Related WMI Events*/
+	WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
+	WMI_TX_ADDBA_COMPLETE_EVENTID,
+
+	/* Roam event to trigger roaming on host */
+	WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
+	WMI_PROFILE_MATCH,
+
+	/* WoW */
+	WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
+
+	/* RTT */
+	WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
+	WMI_TSF_MEASUREMENT_REPORT_EVENTID,
+	WMI_RTT_ERROR_REPORT_EVENTID,
+
+	/* GTK offload */
+	WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
+	WMI_GTK_REKEY_FAIL_EVENTID,
+
+	/* CSA IE received event */
+	WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
+
+	/* Misc events */
+	WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
+	WMI_PDEV_UTF_EVENTID,
+	WMI_DEBUG_MESG_EVENTID,
+	WMI_UPDATE_STATS_EVENTID,
+	WMI_DEBUG_PRINT_EVENTID,
+	WMI_DCS_INTERFERENCE_EVENTID,
+	WMI_PDEV_QVIT_EVENTID,
+	WMI_WLAN_PROFILE_DATA_EVENTID,
+	WMI_PDEV_FTM_INTG_EVENTID,
+	WMI_WLAN_FREQ_AVOID_EVENTID,
+	WMI_VDEV_GET_KEEPALIVE_EVENTID,
+
+	/* GPIO Event */
+	WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
+};
+
+enum wmi_phy_mode {
+	MODE_11A        = 0,   /* 11a Mode */
+	MODE_11G        = 1,   /* 11b/g Mode */
+	MODE_11B        = 2,   /* 11b Mode */
+	MODE_11GONLY    = 3,   /* 11g only Mode */
+	MODE_11NA_HT20   = 4,  /* 11a HT20 mode */
+	MODE_11NG_HT20   = 5,  /* 11g HT20 mode */
+	MODE_11NA_HT40   = 6,  /* 11a HT40 mode */
+	MODE_11NG_HT40   = 7,  /* 11g HT40 mode */
+	MODE_11AC_VHT20 = 8,
+	MODE_11AC_VHT40 = 9,
+	MODE_11AC_VHT80 = 10,
+	/*    MODE_11AC_VHT160 = 11, */
+	MODE_11AC_VHT20_2G = 11,
+	MODE_11AC_VHT40_2G = 12,
+	MODE_11AC_VHT80_2G = 13,
+	MODE_UNKNOWN    = 14,
+	MODE_MAX        = 14
+};
+
+#define WMI_CHAN_LIST_TAG	0x1
+#define WMI_SSID_LIST_TAG	0x2
+#define WMI_BSSID_LIST_TAG	0x3
+#define WMI_IE_TAG		0x4
+
+struct wmi_channel {
+	__le32 mhz;
+	__le32 band_center_freq1;
+	__le32 band_center_freq2; /* valid for 11ac, 80plus80 */
+	union {
+		__le32 flags; /* WMI_CHAN_FLAG_ */
+		struct {
+			u8 mode; /* only 6 LSBs */
+		} __packed;
+	} __packed;
+	union {
+		__le32 reginfo0;
+		struct {
+			u8 min_power;
+			u8 max_power;
+			u8 reg_power;
+			u8 reg_classid;
+		} __packed;
+	} __packed;
+	union {
+		__le32 reginfo1;
+		struct {
+			u8 antenna_max;
+		} __packed;
+	} __packed;
+} __packed;
+
+struct wmi_channel_arg {
+	u32 freq;
+	u32 band_center_freq1;
+	bool passive;
+	bool allow_ibss;
+	bool allow_ht;
+	bool allow_vht;
+	bool ht40plus;
+	/* note: power unit is 1/4th of dBm */
+	u32 min_power;
+	u32 max_power;
+	u32 max_reg_power;
+	u32 max_antenna_gain;
+	u32 reg_class_id;
+	enum wmi_phy_mode mode;
+};
+
+enum wmi_channel_change_cause {
+	WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
+	WMI_CHANNEL_CHANGE_CAUSE_CSA,
+};
+
+#define WMI_CHAN_FLAG_HT40_PLUS      (1 << 6)
+#define WMI_CHAN_FLAG_PASSIVE        (1 << 7)
+#define WMI_CHAN_FLAG_ADHOC_ALLOWED  (1 << 8)
+#define WMI_CHAN_FLAG_AP_DISABLED    (1 << 9)
+#define WMI_CHAN_FLAG_DFS            (1 << 10)
+#define WMI_CHAN_FLAG_ALLOW_HT       (1 << 11)
+#define WMI_CHAN_FLAG_ALLOW_VHT      (1 << 12)
+
+/* Indicate reason for channel switch */
+#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
+
+#define WMI_MAX_SPATIAL_STREAM   3
+
+/* HT Capabilities*/
+#define WMI_HT_CAP_ENABLED                0x0001   /* HT Enabled/ disabled */
+#define WMI_HT_CAP_HT20_SGI       0x0002   /* Short Guard Interval with HT20 */
+#define WMI_HT_CAP_DYNAMIC_SMPS           0x0004   /* Dynamic MIMO powersave */
+#define WMI_HT_CAP_TX_STBC                0x0008   /* B3 TX STBC */
+#define WMI_HT_CAP_TX_STBC_MASK_SHIFT     3
+#define WMI_HT_CAP_RX_STBC                0x0030   /* B4-B5 RX STBC */
+#define WMI_HT_CAP_RX_STBC_MASK_SHIFT     4
+#define WMI_HT_CAP_LDPC                   0x0040   /* LDPC supported */
+#define WMI_HT_CAP_L_SIG_TXOP_PROT        0x0080   /* L-SIG TXOP Protection */
+#define WMI_HT_CAP_MPDU_DENSITY           0x0700   /* MPDU Density */
+#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
+#define WMI_HT_CAP_HT40_SGI               0x0800
+
+#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED       | \
+				WMI_HT_CAP_HT20_SGI      | \
+				WMI_HT_CAP_HT40_SGI      | \
+				WMI_HT_CAP_TX_STBC       | \
+				WMI_HT_CAP_RX_STBC       | \
+				WMI_HT_CAP_LDPC)
+
+
+/*
+ * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
+ * field. The fields not defined here are not supported, or reserved.
+ * Do not change these masks and if you have to add new one follow the
+ * bitmask as specified by 802.11ac draft.
+ */
+
+#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK            0x00000003
+#define WMI_VHT_CAP_RX_LDPC                      0x00000010
+#define WMI_VHT_CAP_SGI_80MHZ                    0x00000020
+#define WMI_VHT_CAP_TX_STBC                      0x00000080
+#define WMI_VHT_CAP_RX_STBC_MASK                 0x00000300
+#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT           8
+#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP            0x03800000
+#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT      23
+#define WMI_VHT_CAP_RX_FIXED_ANT                 0x10000000
+#define WMI_VHT_CAP_TX_FIXED_ANT                 0x20000000
+
+/* The following also refer for max HT AMSDU */
+#define WMI_VHT_CAP_MAX_MPDU_LEN_3839            0x00000000
+#define WMI_VHT_CAP_MAX_MPDU_LEN_7935            0x00000001
+#define WMI_VHT_CAP_MAX_MPDU_LEN_11454           0x00000002
+
+#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
+				 WMI_VHT_CAP_RX_LDPC             | \
+				 WMI_VHT_CAP_SGI_80MHZ           | \
+				 WMI_VHT_CAP_TX_STBC             | \
+				 WMI_VHT_CAP_RX_STBC_MASK        | \
+				 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   | \
+				 WMI_VHT_CAP_RX_FIXED_ANT        | \
+				 WMI_VHT_CAP_TX_FIXED_ANT)
+
+/*
+ * Interested readers refer to Rx/Tx MCS Map definition as defined in
+ * 802.11ac
+ */
+#define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss)      ((3 & (r)) << (((ss) - 1) << 1))
+#define WMI_VHT_MAX_SUPP_RATE_MASK           0x1fff0000
+#define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT     16
+
+enum {
+	REGDMN_MODE_11A              = 0x00001, /* 11a channels */
+	REGDMN_MODE_TURBO            = 0x00002, /* 11a turbo-only channels */
+	REGDMN_MODE_11B              = 0x00004, /* 11b channels */
+	REGDMN_MODE_PUREG            = 0x00008, /* 11g channels (OFDM only) */
+	REGDMN_MODE_11G              = 0x00008, /* XXX historical */
+	REGDMN_MODE_108G             = 0x00020, /* 11a+Turbo channels */
+	REGDMN_MODE_108A             = 0x00040, /* 11g+Turbo channels */
+	REGDMN_MODE_XR               = 0x00100, /* XR channels */
+	REGDMN_MODE_11A_HALF_RATE    = 0x00200, /* 11A half rate channels */
+	REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
+	REGDMN_MODE_11NG_HT20        = 0x00800, /* 11N-G HT20 channels */
+	REGDMN_MODE_11NA_HT20        = 0x01000, /* 11N-A HT20 channels */
+	REGDMN_MODE_11NG_HT40PLUS    = 0x02000, /* 11N-G HT40 + channels */
+	REGDMN_MODE_11NG_HT40MINUS   = 0x04000, /* 11N-G HT40 - channels */
+	REGDMN_MODE_11NA_HT40PLUS    = 0x08000, /* 11N-A HT40 + channels */
+	REGDMN_MODE_11NA_HT40MINUS   = 0x10000, /* 11N-A HT40 - channels */
+	REGDMN_MODE_11AC_VHT20       = 0x20000, /* 5Ghz, VHT20 */
+	REGDMN_MODE_11AC_VHT40PLUS   = 0x40000, /* 5Ghz, VHT40 + channels */
+	REGDMN_MODE_11AC_VHT40MINUS  = 0x80000, /* 5Ghz  VHT40 - channels */
+	REGDMN_MODE_11AC_VHT80       = 0x100000, /* 5Ghz, VHT80 channels */
+	REGDMN_MODE_ALL              = 0xffffffff
+};
+
+#define REGDMN_CAP1_CHAN_HALF_RATE        0x00000001
+#define REGDMN_CAP1_CHAN_QUARTER_RATE     0x00000002
+#define REGDMN_CAP1_CHAN_HAL49GHZ         0x00000004
+
+/* regulatory capabilities */
+#define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x0040
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x0080
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_U2         0x0100
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x0200
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x0400
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x0800
+
+struct hal_reg_capabilities {
+	/* regdomain value specified in EEPROM */
+	__le32 eeprom_rd;
+	/*regdomain */
+	__le32 eeprom_rd_ext;
+	/* CAP1 capabilities bit map. */
+	__le32 regcap1;
+	/* REGDMN EEPROM CAP. */
+	__le32 regcap2;
+	/* REGDMN MODE */
+	__le32 wireless_modes;
+	__le32 low_2ghz_chan;
+	__le32 high_2ghz_chan;
+	__le32 low_5ghz_chan;
+	__le32 high_5ghz_chan;
+} __packed;
+
+enum wlan_mode_capability {
+	WHAL_WLAN_11A_CAPABILITY   = 0x1,
+	WHAL_WLAN_11G_CAPABILITY   = 0x2,
+	WHAL_WLAN_11AG_CAPABILITY  = 0x3,
+};
+
+/* structure used by FW for requesting host memory */
+struct wlan_host_mem_req {
+	/* ID of the request */
+	__le32 req_id;
+	/* size of the  of each unit */
+	__le32 unit_size;
+	/* flags to  indicate that
+	 * the number units is dependent
+	 * on number of resources(num vdevs num peers .. etc)
+	 */
+	__le32 num_unit_info;
+	/*
+	 * actual number of units to allocate . if flags in the num_unit_info
+	 * indicate that number of units is tied to number of a particular
+	 * resource to allocate then  num_units filed is set to 0 and host
+	 * will derive the number units from number of the resources it is
+	 * requesting.
+	 */
+	__le32 num_units;
+} __packed;
+
+#define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id) \
+	((((wmi_svc_bmap)[(svc_id)/(sizeof(u32))]) & \
+	(1 << ((svc_id)%(sizeof(u32))))) != 0)
+
+/*
+ * The following struct holds optional payload for
+ * wmi_service_ready_event,e.g., 11ac pass some of the
+ * device capability to the host.
+ */
+struct wmi_service_ready_event {
+	__le32 sw_version;
+	__le32 sw_version_1;
+	__le32 abi_version;
+	/* WMI_PHY_CAPABILITY */
+	__le32 phy_capability;
+	/* Maximum number of frag table entries that SW will populate less 1 */
+	__le32 max_frag_entry;
+	__le32 wmi_service_bitmap[WMI_SERVICE_BM_SIZE];
+	__le32 num_rf_chains;
+	/*
+	 * The following field is only valid for service type
+	 * WMI_SERVICE_11AC
+	 */
+	__le32 ht_cap_info; /* WMI HT Capability */
+	__le32 vht_cap_info; /* VHT capability info field of 802.11ac */
+	__le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
+	__le32 hw_min_tx_power;
+	__le32 hw_max_tx_power;
+	struct hal_reg_capabilities hal_reg_capabilities;
+	__le32 sys_cap_info;
+	__le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
+	/*
+	 * Max beacon and Probe Response IE offload size
+	 * (includes optional P2P IEs)
+	 */
+	__le32 max_bcn_ie_size;
+	/*
+	 * request to host to allocate a chuck of memory and pss it down to FW
+	 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
+	 * data structures. Only valid for low latency interfaces like PCIE
+	 * where FW can access this memory directly (or) by DMA.
+	 */
+	__le32 num_mem_reqs;
+	struct wlan_host_mem_req mem_reqs[1];
+} __packed;
+
+/*
+ * status consists of  upper 16 bits fo int status and lower 16 bits of
+ * module ID that retuned status
+ */
+#define WLAN_INIT_STATUS_SUCCESS   0x0
+#define WLAN_GET_INIT_STATUS_REASON(status)    ((status) & 0xffff)
+#define WLAN_GET_INIT_STATUS_MODULE_ID(status) (((status) >> 16) & 0xffff)
+
+#define WMI_SERVICE_READY_TIMEOUT_HZ (5*HZ)
+#define WMI_UNIFIED_READY_TIMEOUT_HZ (5*HZ)
+
+struct wmi_ready_event {
+	__le32 sw_version;
+	__le32 abi_version;
+	struct wmi_mac_addr mac_addr;
+	__le32 status;
+} __packed;
+
+struct wmi_resource_config {
+	/* number of virtual devices (VAPs) to support */
+	__le32 num_vdevs;
+
+	/* number of peer nodes to support */
+	__le32 num_peers;
+
+	/*
+	 * In offload mode target supports features like WOW, chatter and
+	 * other protocol offloads. In order to support them some
+	 * functionalities like reorder buffering, PN checking need to be
+	 * done in target. This determines maximum number of peers suported
+	 * by target in offload mode
+	 */
+	__le32 num_offload_peers;
+
+	/* For target-based RX reordering */
+	__le32 num_offload_reorder_bufs;
+
+	/* number of keys per peer */
+	__le32 num_peer_keys;
+
+	/* total number of TX/RX data TIDs */
+	__le32 num_tids;
+
+	/*
+	 * max skid for resolving hash collisions
+	 *
+	 *   The address search table is sparse, so that if two MAC addresses
+	 *   result in the same hash value, the second of these conflicting
+	 *   entries can slide to the next index in the address search table,
+	 *   and use it, if it is unoccupied.  This ast_skid_limit parameter
+	 *   specifies the upper bound on how many subsequent indices to search
+	 *   over to find an unoccupied space.
+	 */
+	__le32 ast_skid_limit;
+
+	/*
+	 * the nominal chain mask for transmit
+	 *
+	 *   The chain mask may be modified dynamically, e.g. to operate AP
+	 *   tx with a reduced number of chains if no clients are associated.
+	 *   This configuration parameter specifies the nominal chain-mask that
+	 *   should be used when not operating with a reduced set of tx chains.
+	 */
+	__le32 tx_chain_mask;
+
+	/*
+	 * the nominal chain mask for receive
+	 *
+	 *   The chain mask may be modified dynamically, e.g. for a client
+	 *   to use a reduced number of chains for receive if the traffic to
+	 *   the client is low enough that it doesn't require downlink MIMO
+	 *   or antenna diversity.
+	 *   This configuration parameter specifies the nominal chain-mask that
+	 *   should be used when not operating with a reduced set of rx chains.
+	 */
+	__le32 rx_chain_mask;
+
+	/*
+	 * what rx reorder timeout (ms) to use for the AC
+	 *
+	 *   Each WMM access class (voice, video, best-effort, background) will
+	 *   have its own timeout value to dictate how long to wait for missing
+	 *   rx MPDUs to arrive before flushing subsequent MPDUs that have
+	 *   already been received.
+	 *   This parameter specifies the timeout in milliseconds for each
+	 *   class.
+	 */
+	__le32 rx_timeout_pri_vi;
+	__le32 rx_timeout_pri_vo;
+	__le32 rx_timeout_pri_be;
+	__le32 rx_timeout_pri_bk;
+
+	/*
+	 * what mode the rx should decap packets to
+	 *
+	 *   MAC can decap to RAW (no decap), native wifi or Ethernet types
+	 *   THis setting also determines the default TX behavior, however TX
+	 *   behavior can be modified on a per VAP basis during VAP init
+	 */
+	__le32 rx_decap_mode;
+
+	/* what is the maximum scan requests than can be queued */
+	__le32 scan_max_pending_reqs;
+
+	/* maximum VDEV that could use BMISS offload */
+	__le32 bmiss_offload_max_vdev;
+
+	/* maximum VDEV that could use offload roaming */
+	__le32 roam_offload_max_vdev;
+
+	/* maximum AP profiles that would push to offload roaming */
+	__le32 roam_offload_max_ap_profiles;
+
+	/*
+	 * how many groups to use for mcast->ucast conversion
+	 *
+	 *   The target's WAL maintains a table to hold information regarding
+	 *   which peers belong to a given multicast group, so that if
+	 *   multicast->unicast conversion is enabled, the target can convert
+	 *   multicast tx frames to a series of unicast tx frames, to each
+	 *   peer within the multicast group.
+	     This num_mcast_groups configuration parameter tells the target how
+	 *   many multicast groups to provide storage for within its multicast
+	 *   group membership table.
+	 */
+	__le32 num_mcast_groups;
+
+	/*
+	 * size to alloc for the mcast membership table
+	 *
+	 *   This num_mcast_table_elems configuration parameter tells the
+	 *   target how many peer elements it needs to provide storage for in
+	 *   its multicast group membership table.
+	 *   These multicast group membership table elements are shared by the
+	 *   multicast groups stored within the table.
+	 */
+	__le32 num_mcast_table_elems;
+
+	/*
+	 * whether/how to do multicast->unicast conversion
+	 *
+	 *   This configuration parameter specifies whether the target should
+	 *   perform multicast --> unicast conversion on transmit, and if so,
+	 *   what to do if it finds no entries in its multicast group
+	 *   membership table for the multicast IP address in the tx frame.
+	 *   Configuration value:
+	 *   0 -> Do not perform multicast to unicast conversion.
+	 *   1 -> Convert multicast frames to unicast, if the IP multicast
+	 *        address from the tx frame is found in the multicast group
+	 *        membership table.  If the IP multicast address is not found,
+	 *        drop the frame.
+	 *   2 -> Convert multicast frames to unicast, if the IP multicast
+	 *        address from the tx frame is found in the multicast group
+	 *        membership table.  If the IP multicast address is not found,
+	 *        transmit the frame as multicast.
+	 */
+	__le32 mcast2ucast_mode;
+
+	/*
+	 * how much memory to allocate for a tx PPDU dbg log
+	 *
+	 *   This parameter controls how much memory the target will allocate
+	 *   to store a log of tx PPDU meta-information (how large the PPDU
+	 *   was, when it was sent, whether it was successful, etc.)
+	 */
+	__le32 tx_dbg_log_size;
+
+	/* how many AST entries to be allocated for WDS */
+	__le32 num_wds_entries;
+
+	/*
+	 * MAC DMA burst size, e.g., For target PCI limit can be
+	 * 0 -default, 1 256B
+	 */
+	__le32 dma_burst_size;
+
+	/*
+	 * Fixed delimiters to be inserted after every MPDU to
+	 * account for interface latency to avoid underrun.
+	 */
+	__le32 mac_aggr_delim;
+
+	/*
+	 *   determine whether target is responsible for detecting duplicate
+	 *   non-aggregate MPDU and timing out stale fragments.
+	 *
+	 *   A-MPDU reordering is always performed on the target.
+	 *
+	 *   0: target responsible for frag timeout and dup checking
+	 *   1: host responsible for frag timeout and dup checking
+	 */
+	__le32 rx_skip_defrag_timeout_dup_detection_check;
+
+	/*
+	 * Configuration for VoW :
+	 * No of Video Nodes to be supported
+	 * and Max no of descriptors for each Video link (node).
+	 */
+	__le32 vow_config;
+
+	/* maximum VDEV that could use GTK offload */
+	__le32 gtk_offload_max_vdev;
+
+	/* Number of msdu descriptors target should use */
+	__le32 num_msdu_desc;
+
+	/*
+	 * Max. number of Tx fragments per MSDU
+	 *  This parameter controls the max number of Tx fragments per MSDU.
+	 *  This is sent by the target as part of the WMI_SERVICE_READY event
+	 *  and is overriden by the OS shim as required.
+	 */
+	__le32 max_frag_entries;
+} __packed;
+
+/* strucutre describing host memory chunk. */
+struct host_memory_chunk {
+	/* id of the request that is passed up in service ready */
+	__le32 req_id;
+	/* the physical address the memory chunk */
+	__le32 ptr;
+	/* size of the chunk */
+	__le32 size;
+} __packed;
+
+struct wmi_init_cmd {
+	struct wmi_resource_config resource_config;
+	__le32 num_host_mem_chunks;
+
+	/*
+	 * variable number of host memory chunks.
+	 * This should be the last element in the structure
+	 */
+	struct host_memory_chunk host_mem_chunks[1];
+} __packed;
+
+/* TLV for channel list */
+struct wmi_chan_list {
+	__le32 tag; /* WMI_CHAN_LIST_TAG */
+	__le32 num_chan;
+	__le32 channel_list[0];
+} __packed;
+
+struct wmi_bssid_list {
+	__le32 tag; /* WMI_BSSID_LIST_TAG */
+	__le32 num_bssid;
+	struct wmi_mac_addr bssid_list[0];
+} __packed;
+
+struct wmi_ie_data {
+	__le32 tag; /* WMI_IE_TAG */
+	__le32 ie_len;
+	u8 ie_data[0];
+} __packed;
+
+struct wmi_ssid {
+	__le32 ssid_len;
+	u8 ssid[32];
+} __packed;
+
+struct wmi_ssid_list {
+	__le32 tag; /* WMI_SSID_LIST_TAG */
+	__le32 num_ssids;
+	struct wmi_ssid ssids[0];
+} __packed;
+
+/* prefix used by scan requestor ids on the host */
+#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
+
+/* prefix used by scan request ids generated on the host */
+/* host cycles through the lower 12 bits to generate ids */
+#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
+
+#define WLAN_SCAN_PARAMS_MAX_SSID    16
+#define WLAN_SCAN_PARAMS_MAX_BSSID   4
+#define WLAN_SCAN_PARAMS_MAX_IE_LEN  256
+
+/* Scan priority numbers must be sequential, starting with 0 */
+enum wmi_scan_priority {
+	WMI_SCAN_PRIORITY_VERY_LOW = 0,
+	WMI_SCAN_PRIORITY_LOW,
+	WMI_SCAN_PRIORITY_MEDIUM,
+	WMI_SCAN_PRIORITY_HIGH,
+	WMI_SCAN_PRIORITY_VERY_HIGH,
+	WMI_SCAN_PRIORITY_COUNT   /* number of priorities supported */
+};
+
+struct wmi_start_scan_cmd {
+	/* Scan ID */
+	__le32 scan_id;
+	/* Scan requestor ID */
+	__le32 scan_req_id;
+	/* VDEV id(interface) that is requesting scan */
+	__le32 vdev_id;
+	/* Scan Priority, input to scan scheduler */
+	__le32 scan_priority;
+	/* Scan events subscription */
+	__le32 notify_scan_events;
+	/* dwell time in msec on active channels */
+	__le32 dwell_time_active;
+	/* dwell time in msec on passive channels */
+	__le32 dwell_time_passive;
+	/*
+	 * min time in msec on the BSS channel,only valid if atleast one
+	 * VDEV is active
+	 */
+	__le32 min_rest_time;
+	/*
+	 * max rest time in msec on the BSS channel,only valid if at least
+	 * one VDEV is active
+	 */
+	/*
+	 * the scanner will rest on the bss channel at least min_rest_time
+	 * after min_rest_time the scanner will start checking for tx/rx
+	 * activity on all VDEVs. if there is no activity the scanner will
+	 * switch to off channel. if there is activity the scanner will let
+	 * the radio on the bss channel until max_rest_time expires.at
+	 * max_rest_time scanner will switch to off channel irrespective of
+	 * activity. activity is determined by the idle_time parameter.
+	 */
+	__le32 max_rest_time;
+	/*
+	 * time before sending next set of probe requests.
+	 * The scanner keeps repeating probe requests transmission with
+	 * period specified by repeat_probe_time.
+	 * The number of probe requests specified depends on the ssid_list
+	 * and bssid_list
+	 */
+	__le32 repeat_probe_time;
+	/* time in msec between 2 consequetive probe requests with in a set. */
+	__le32 probe_spacing_time;
+	/*
+	 * data inactivity time in msec on bss channel that will be used by
+	 * scanner for measuring the inactivity.
+	 */
+	__le32 idle_time;
+	/* maximum time in msec allowed for scan  */
+	__le32 max_scan_time;
+	/*
+	 * delay in msec before sending first probe request after switching
+	 * to a channel
+	 */
+	__le32 probe_delay;
+	/* Scan control flags */
+	__le32 scan_ctrl_flags;
+
+	/* Burst duration time in msecs */
+	__le32 burst_duration;
+	/*
+	 * TLV (tag length value )  paramerters follow the scan_cmd structure.
+	 * TLV can contain channel list, bssid list, ssid list and
+	 * ie. the TLV tags are defined above;
+	 */
+} __packed;
+
+struct wmi_ssid_arg {
+	int len;
+	const u8 *ssid;
+};
+
+struct wmi_bssid_arg {
+	const u8 *bssid;
+};
+
+struct wmi_start_scan_arg {
+	u32 scan_id;
+	u32 scan_req_id;
+	u32 vdev_id;
+	u32 scan_priority;
+	u32 notify_scan_events;
+	u32 dwell_time_active;
+	u32 dwell_time_passive;
+	u32 min_rest_time;
+	u32 max_rest_time;
+	u32 repeat_probe_time;
+	u32 probe_spacing_time;
+	u32 idle_time;
+	u32 max_scan_time;
+	u32 probe_delay;
+	u32 scan_ctrl_flags;
+
+	u32 ie_len;
+	u32 n_channels;
+	u32 n_ssids;
+	u32 n_bssids;
+
+	u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
+	u32 channels[64];
+	struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
+	struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
+};
+
+/* scan control flags */
+
+/* passively scan all channels including active channels */
+#define WMI_SCAN_FLAG_PASSIVE        0x1
+/* add wild card ssid probe request even though ssid_list is specified. */
+#define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
+/* add cck rates to rates/xrate ie for the generated probe request */
+#define WMI_SCAN_ADD_CCK_RATES 0x4
+/* add ofdm rates to rates/xrate ie for the generated probe request */
+#define WMI_SCAN_ADD_OFDM_RATES 0x8
+/* To enable indication of Chan load and Noise floor to host */
+#define WMI_SCAN_CHAN_STAT_EVENT 0x10
+/* Filter Probe request frames  */
+#define WMI_SCAN_FILTER_PROBE_REQ 0x20
+/* When set, DFS channels will not be scanned */
+#define WMI_SCAN_BYPASS_DFS_CHN 0x40
+/* Different FW scan engine may choose to bail out on errors.
+ * Allow the driver to have influence over that. */
+#define WMI_SCAN_CONTINUE_ON_ERROR 0x80
+
+/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
+#define WMI_SCAN_CLASS_MASK 0xFF000000
+
+
+enum wmi_stop_scan_type {
+	WMI_SCAN_STOP_ONE	= 0x00000000, /* stop by scan_id */
+	WMI_SCAN_STOP_VDEV_ALL	= 0x01000000, /* stop by vdev_id */
+	WMI_SCAN_STOP_ALL	= 0x04000000, /* stop all scans */
+};
+
+struct wmi_stop_scan_cmd {
+	__le32 scan_req_id;
+	__le32 scan_id;
+	__le32 req_type;
+	__le32 vdev_id;
+} __packed;
+
+struct wmi_stop_scan_arg {
+	u32 req_id;
+	enum wmi_stop_scan_type req_type;
+	union {
+		u32 scan_id;
+		u32 vdev_id;
+	} u;
+};
+
+struct wmi_scan_chan_list_cmd {
+	__le32 num_scan_chans;
+	struct wmi_channel chan_info[0];
+} __packed;
+
+struct wmi_scan_chan_list_arg {
+	u32 n_channels;
+	struct wmi_channel_arg *channels;
+};
+
+enum wmi_bss_filter {
+	WMI_BSS_FILTER_NONE = 0,        /* no beacons forwarded */
+	WMI_BSS_FILTER_ALL,             /* all beacons forwarded */
+	WMI_BSS_FILTER_PROFILE,         /* only beacons matching profile */
+	WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
+	WMI_BSS_FILTER_CURRENT_BSS,     /* only beacons matching current BSS */
+	WMI_BSS_FILTER_ALL_BUT_BSS,     /* all but beacons matching BSS */
+	WMI_BSS_FILTER_PROBED_SSID,     /* beacons matching probed ssid */
+	WMI_BSS_FILTER_LAST_BSS,        /* marker only */
+};
+
+enum wmi_scan_event_type {
+	WMI_SCAN_EVENT_STARTED         = 0x1,
+	WMI_SCAN_EVENT_COMPLETED       = 0x2,
+	WMI_SCAN_EVENT_BSS_CHANNEL     = 0x4,
+	WMI_SCAN_EVENT_FOREIGN_CHANNEL = 0x8,
+	WMI_SCAN_EVENT_DEQUEUED        = 0x10,
+	WMI_SCAN_EVENT_PREEMPTED       = 0x20, /* possibly by high-prio scan */
+	WMI_SCAN_EVENT_START_FAILED    = 0x40,
+	WMI_SCAN_EVENT_RESTARTED       = 0x80,
+	WMI_SCAN_EVENT_MAX             = 0x8000
+};
+
+enum wmi_scan_completion_reason {
+	WMI_SCAN_REASON_COMPLETED,
+	WMI_SCAN_REASON_CANCELLED,
+	WMI_SCAN_REASON_PREEMPTED,
+	WMI_SCAN_REASON_TIMEDOUT,
+	WMI_SCAN_REASON_MAX,
+};
+
+struct wmi_scan_event {
+	__le32 event_type; /* %WMI_SCAN_EVENT_ */
+	__le32 reason; /* %WMI_SCAN_REASON_ */
+	__le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
+	__le32 scan_req_id;
+	__le32 scan_id;
+	__le32 vdev_id;
+} __packed;
+
+/*
+ * This defines how much headroom is kept in the
+ * receive frame between the descriptor and the
+ * payload, in order for the WMI PHY error and
+ * management handler to insert header contents.
+ *
+ * This is in bytes.
+ */
+#define WMI_MGMT_RX_HDR_HEADROOM    52
+
+/*
+ * This event will be used for sending scan results
+ * as well as rx mgmt frames to the host. The rx buffer
+ * will be sent as part of this WMI event. It would be a
+ * good idea to pass all the fields in the RX status
+ * descriptor up to the host.
+ */
+struct wmi_mgmt_rx_hdr {
+	__le32 channel;
+	__le32 snr;
+	__le32 rate;
+	__le32 phy_mode;
+	__le32 buf_len;
+	__le32 status; /* %WMI_RX_STATUS_ */
+} __packed;
+
+struct wmi_mgmt_rx_event {
+	struct wmi_mgmt_rx_hdr hdr;
+	u8 buf[0];
+} __packed;
+
+#define WMI_RX_STATUS_OK			0x00
+#define WMI_RX_STATUS_ERR_CRC			0x01
+#define WMI_RX_STATUS_ERR_DECRYPT		0x08
+#define WMI_RX_STATUS_ERR_MIC			0x10
+#define WMI_RX_STATUS_ERR_KEY_CACHE_MISS	0x20
+
+struct wmi_single_phyerr_rx_hdr {
+	/* TSF timestamp */
+	__le32 tsf_timestamp;
+
+	/*
+	 * Current freq1, freq2
+	 *
+	 * [7:0]:    freq1[lo]
+	 * [15:8] :   freq1[hi]
+	 * [23:16]:   freq2[lo]
+	 * [31:24]:   freq2[hi]
+	 */
+	__le16 freq1;
+	__le16 freq2;
+
+	/*
+	 * Combined RSSI over all chains and channel width for this PHY error
+	 *
+	 * [7:0]: RSSI combined
+	 * [15:8]: Channel width (MHz)
+	 * [23:16]: PHY error code
+	 * [24:16]: reserved (future use)
+	 */
+	u8 rssi_combined;
+	u8 chan_width_mhz;
+	u8 phy_err_code;
+	u8 rsvd0;
+
+	/*
+	 * RSSI on chain 0 through 3
+	 *
+	 * This is formatted the same as the PPDU_START RX descriptor
+	 * field:
+	 *
+	 * [7:0]:   pri20
+	 * [15:8]:  sec20
+	 * [23:16]: sec40
+	 * [31:24]: sec80
+	 */
+
+	__le32 rssi_chain0;
+	__le32 rssi_chain1;
+	__le32 rssi_chain2;
+	__le32 rssi_chain3;
+
+	/*
+	 * Last calibrated NF value for chain 0 through 3
+	 *
+	 * nf_list_1:
+	 *
+	 * + [15:0] - chain 0
+	 * + [31:16] - chain 1
+	 *
+	 * nf_list_2:
+	 *
+	 * + [15:0] - chain 2
+	 * + [31:16] - chain 3
+	 */
+	__le32 nf_list_1;
+	__le32 nf_list_2;
+
+
+	/* Length of the frame */
+	__le32 buf_len;
+} __packed;
+
+struct wmi_single_phyerr_rx_event {
+	/* Phy error event header */
+	struct wmi_single_phyerr_rx_hdr hdr;
+	/* frame buffer */
+	u8 bufp[0];
+} __packed;
+
+struct wmi_comb_phyerr_rx_hdr {
+	/* Phy error phy error count */
+	__le32 num_phyerr_events;
+	__le32 tsf_l32;
+	__le32 tsf_u32;
+} __packed;
+
+struct wmi_comb_phyerr_rx_event {
+	/* Phy error phy error count */
+	struct wmi_comb_phyerr_rx_hdr hdr;
+	/*
+	 * frame buffer - contains multiple payloads in the order:
+	 *                    header - payload, header - payload...
+	 *  (The header is of type: wmi_single_phyerr_rx_hdr)
+	 */
+	u8 bufp[0];
+} __packed;
+
+struct wmi_mgmt_tx_hdr {
+	__le32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	__le32 tx_rate;
+	__le32 tx_power;
+	__le32 buf_len;
+} __packed;
+
+struct wmi_mgmt_tx_cmd {
+	struct wmi_mgmt_tx_hdr hdr;
+	u8 buf[0];
+} __packed;
+
+struct wmi_echo_event {
+	__le32 value;
+} __packed;
+
+struct wmi_echo_cmd {
+	__le32 value;
+} __packed;
+
+
+struct wmi_pdev_set_regdomain_cmd {
+	__le32 reg_domain;
+	__le32 reg_domain_2G;
+	__le32 reg_domain_5G;
+	__le32 conformance_test_limit_2G;
+	__le32 conformance_test_limit_5G;
+} __packed;
+
+/* Command to set/unset chip in quiet mode */
+struct wmi_pdev_set_quiet_cmd {
+	/* period in TUs */
+	__le32 period;
+
+	/* duration in TUs */
+	__le32 duration;
+
+	/* offset in TUs */
+	__le32 next_start;
+
+	/* enable/disable */
+	__le32 enabled;
+} __packed;
+
+
+/*
+ * 802.11g protection mode.
+ */
+enum ath10k_protmode {
+	ATH10K_PROT_NONE     = 0,    /* no protection */
+	ATH10K_PROT_CTSONLY  = 1,    /* CTS to self */
+	ATH10K_PROT_RTSCTS   = 2,    /* RTS-CTS */
+};
+
+enum wmi_beacon_gen_mode {
+	WMI_BEACON_STAGGERED_MODE = 0,
+	WMI_BEACON_BURST_MODE = 1
+};
+
+enum wmi_csa_event_ies_present_flag {
+	WMI_CSA_IE_PRESENT = 0x00000001,
+	WMI_XCSA_IE_PRESENT = 0x00000002,
+	WMI_WBW_IE_PRESENT = 0x00000004,
+	WMI_CSWARP_IE_PRESENT = 0x00000008,
+};
+
+/* wmi CSA receive event from beacon frame */
+struct wmi_csa_event {
+	__le32 i_fc_dur;
+	/* Bit 0-15: FC */
+	/* Bit 16-31: DUR */
+	struct wmi_mac_addr i_addr1;
+	struct wmi_mac_addr i_addr2;
+	__le32 csa_ie[2];
+	__le32 xcsa_ie[2];
+	__le32 wb_ie[2];
+	__le32 cswarp_ie;
+	__le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
+} __packed;
+
+/* the definition of different PDEV parameters */
+#define PDEV_DEFAULT_STATS_UPDATE_PERIOD    500
+#define VDEV_DEFAULT_STATS_UPDATE_PERIOD    500
+#define PEER_DEFAULT_STATS_UPDATE_PERIOD    500
+
+enum wmi_pdev_param {
+	/* TX chian mask */
+	WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
+	/* RX chian mask */
+	WMI_PDEV_PARAM_RX_CHAIN_MASK,
+	/* TX power limit for 2G Radio */
+	WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
+	/* TX power limit for 5G Radio */
+	WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
+	/* TX power scale */
+	WMI_PDEV_PARAM_TXPOWER_SCALE,
+	/* Beacon generation mode . 0: host, 1: target   */
+	WMI_PDEV_PARAM_BEACON_GEN_MODE,
+	/* Beacon generation mode . 0: staggered 1: bursted   */
+	WMI_PDEV_PARAM_BEACON_TX_MODE,
+	/*
+	 * Resource manager off chan mode .
+	 * 0: turn off off chan mode. 1: turn on offchan mode
+	 */
+	WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
+	/*
+	 * Protection mode:
+	 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
+	 */
+	WMI_PDEV_PARAM_PROTECTION_MODE,
+	/* Dynamic bandwidth 0: disable 1: enable */
+	WMI_PDEV_PARAM_DYNAMIC_BW,
+	/* Non aggregrate/ 11g sw retry threshold.0-disable */
+	WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
+	/* aggregrate sw retry threshold. 0-disable*/
+	WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
+	/* Station kickout threshold (non of consecutive failures).0-disable */
+	WMI_PDEV_PARAM_STA_KICKOUT_TH,
+	/* Aggerate size scaling configuration per AC */
+	WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
+	/* LTR enable */
+	WMI_PDEV_PARAM_LTR_ENABLE,
+	/* LTR latency for BE, in us */
+	WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
+	/* LTR latency for BK, in us */
+	WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
+	/* LTR latency for VI, in us */
+	WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
+	/* LTR latency for VO, in us  */
+	WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
+	/* LTR AC latency timeout, in ms */
+	WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
+	/* LTR platform latency override, in us */
+	WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
+	/* LTR-RX override, in us */
+	WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
+	/* Tx activity timeout for LTR, in us */
+	WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
+	/* L1SS state machine enable */
+	WMI_PDEV_PARAM_L1SS_ENABLE,
+	/* Deep sleep state machine enable */
+	WMI_PDEV_PARAM_DSLEEP_ENABLE,
+	/* RX buffering flush enable */
+	WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
+	/* RX buffering matermark */
+	WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
+	/* RX buffering timeout enable */
+	WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
+	/* RX buffering timeout value */
+	WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
+	/* pdev level stats update period in ms */
+	WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
+	/* vdev level stats update period in ms */
+	WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
+	/* peer level stats update period in ms */
+	WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
+	/* beacon filter status update period */
+	WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
+	/* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
+	WMI_PDEV_PARAM_PMF_QOS,
+	/* Access category on which ARP frames are sent */
+	WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
+	/* DCS configuration */
+	WMI_PDEV_PARAM_DCS,
+	/* Enable/Disable ANI on target */
+	WMI_PDEV_PARAM_ANI_ENABLE,
+	/* configure the ANI polling period */
+	WMI_PDEV_PARAM_ANI_POLL_PERIOD,
+	/* configure the ANI listening period */
+	WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
+	/* configure OFDM immunity level */
+	WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
+	/* configure CCK immunity level */
+	WMI_PDEV_PARAM_ANI_CCK_LEVEL,
+	/* Enable/Disable CDD for 1x1 STAs in rate control module */
+	WMI_PDEV_PARAM_DYNTXCHAIN,
+	/* Enable/Disable proxy STA */
+	WMI_PDEV_PARAM_PROXY_STA,
+	/* Enable/Disable low power state when all VDEVs are inactive/idle. */
+	WMI_PDEV_PARAM_IDLE_PS_CONFIG,
+	/* Enable/Disable power gating sleep */
+	WMI_PDEV_PARAM_POWER_GATING_SLEEP,
+};
+
+struct wmi_pdev_set_param_cmd {
+	__le32 param_id;
+	__le32 param_value;
+} __packed;
+
+struct wmi_pdev_get_tpc_config_cmd {
+	/* parameter   */
+	__le32 param;
+} __packed;
+
+#define WMI_TPC_RATE_MAX		160
+#define WMI_TPC_TX_N_CHAIN		4
+
+enum wmi_tpc_config_event_flag {
+	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD	= 0x1,
+	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC	= 0x2,
+	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF	= 0x4,
+};
+
+struct wmi_pdev_tpc_config_event {
+	__le32 reg_domain;
+	__le32 chan_freq;
+	__le32 phy_mode;
+	__le32 twice_antenna_reduction;
+	__le32 twice_max_rd_power;
+	s32 twice_antenna_gain;
+	__le32 power_limit;
+	__le32 rate_max;
+	__le32 num_tx_chain;
+	__le32 ctl;
+	__le32 flags;
+	s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
+	s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
+	s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
+	s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
+	u8 rates_array[WMI_TPC_RATE_MAX];
+} __packed;
+
+/* Transmit power scale factor. */
+enum wmi_tp_scale {
+	WMI_TP_SCALE_MAX    = 0,	/* no scaling (default) */
+	WMI_TP_SCALE_50     = 1,	/* 50% of max (-3 dBm) */
+	WMI_TP_SCALE_25     = 2,	/* 25% of max (-6 dBm) */
+	WMI_TP_SCALE_12     = 3,	/* 12% of max (-9 dBm) */
+	WMI_TP_SCALE_MIN    = 4,	/* min, but still on   */
+	WMI_TP_SCALE_SIZE   = 5,	/* max num of enum     */
+};
+
+struct wmi_set_channel_cmd {
+	/* channel (only frequency and mode info are used) */
+	struct wmi_channel chan;
+} __packed;
+
+struct wmi_pdev_chanlist_update_event {
+	/* number of channels */
+	__le32 num_chan;
+	/* array of channels */
+	struct wmi_channel channel_list[1];
+} __packed;
+
+#define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
+
+struct wmi_debug_mesg_event {
+	/* message buffer, NULL terminated */
+	char bufp[WMI_MAX_DEBUG_MESG];
+} __packed;
+
+enum {
+	/* P2P device */
+	VDEV_SUBTYPE_P2PDEV = 0,
+	/* P2P client */
+	VDEV_SUBTYPE_P2PCLI,
+	/* P2P GO */
+	VDEV_SUBTYPE_P2PGO,
+	/* BT3.0 HS */
+	VDEV_SUBTYPE_BT,
+};
+
+struct wmi_pdev_set_channel_cmd {
+	/* idnore power , only use flags , mode and freq */
+	struct wmi_channel chan;
+} __packed;
+
+/* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
+#define WMI_DSCP_MAP_MAX    (64)
+struct wmi_pdev_set_dscp_tid_map_cmd {
+	/* map indicating DSCP to TID conversion */
+	__le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
+} __packed;
+
+enum mcast_bcast_rate_id {
+	WMI_SET_MCAST_RATE,
+	WMI_SET_BCAST_RATE
+};
+
+struct mcast_bcast_rate {
+	enum mcast_bcast_rate_id rate_id;
+	__le32 rate;
+} __packed;
+
+struct wmi_wmm_params {
+	__le32 cwmin;
+	__le32 cwmax;
+	__le32 aifs;
+	__le32 txop;
+	__le32 acm;
+	__le32 no_ack;
+} __packed;
+
+struct wmi_pdev_set_wmm_params {
+	struct wmi_wmm_params ac_be;
+	struct wmi_wmm_params ac_bk;
+	struct wmi_wmm_params ac_vi;
+	struct wmi_wmm_params ac_vo;
+} __packed;
+
+struct wmi_wmm_params_arg {
+	u32 cwmin;
+	u32 cwmax;
+	u32 aifs;
+	u32 txop;
+	u32 acm;
+	u32 no_ack;
+};
+
+struct wmi_pdev_set_wmm_params_arg {
+	struct wmi_wmm_params_arg ac_be;
+	struct wmi_wmm_params_arg ac_bk;
+	struct wmi_wmm_params_arg ac_vi;
+	struct wmi_wmm_params_arg ac_vo;
+};
+
+struct wal_dbg_tx_stats {
+	/* Num HTT cookies queued to dispatch list */
+	__le32 comp_queued;
+
+	/* Num HTT cookies dispatched */
+	__le32 comp_delivered;
+
+	/* Num MSDU queued to WAL */
+	__le32 msdu_enqued;
+
+	/* Num MPDU queue to WAL */
+	__le32 mpdu_enqued;
+
+	/* Num MSDUs dropped by WMM limit */
+	__le32 wmm_drop;
+
+	/* Num Local frames queued */
+	__le32 local_enqued;
+
+	/* Num Local frames done */
+	__le32 local_freed;
+
+	/* Num queued to HW */
+	__le32 hw_queued;
+
+	/* Num PPDU reaped from HW */
+	__le32 hw_reaped;
+
+	/* Num underruns */
+	__le32 underrun;
+
+	/* Num PPDUs cleaned up in TX abort */
+	__le32 tx_abort;
+
+	/* Num MPDUs requed by SW */
+	__le32 mpdus_requed;
+
+	/* excessive retries */
+	__le32 tx_ko;
+
+	/* data hw rate code */
+	__le32 data_rc;
+
+	/* Scheduler self triggers */
+	__le32 self_triggers;
+
+	/* frames dropped due to excessive sw retries */
+	__le32 sw_retry_failure;
+
+	/* illegal rate phy errors  */
+	__le32 illgl_rate_phy_err;
+
+	/* wal pdev continous xretry */
+	__le32 pdev_cont_xretry;
+
+	/* wal pdev continous xretry */
+	__le32 pdev_tx_timeout;
+
+	/* wal pdev resets  */
+	__le32 pdev_resets;
+
+	__le32 phy_underrun;
+
+	/* MPDU is more than txop limit */
+	__le32 txop_ovf;
+} __packed;
+
+struct wal_dbg_rx_stats {
+	/* Cnts any change in ring routing mid-ppdu */
+	__le32 mid_ppdu_route_change;
+
+	/* Total number of statuses processed */
+	__le32 status_rcvd;
+
+	/* Extra frags on rings 0-3 */
+	__le32 r0_frags;
+	__le32 r1_frags;
+	__le32 r2_frags;
+	__le32 r3_frags;
+
+	/* MSDUs / MPDUs delivered to HTT */
+	__le32 htt_msdus;
+	__le32 htt_mpdus;
+
+	/* MSDUs / MPDUs delivered to local stack */
+	__le32 loc_msdus;
+	__le32 loc_mpdus;
+
+	/* AMSDUs that have more MSDUs than the status ring size */
+	__le32 oversize_amsdu;
+
+	/* Number of PHY errors */
+	__le32 phy_errs;
+
+	/* Number of PHY errors drops */
+	__le32 phy_err_drop;
+
+	/* Number of mpdu errors - FCS, MIC, ENC etc. */
+	__le32 mpdu_errs;
+} __packed;
+
+struct wal_dbg_peer_stats {
+	/* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
+	__le32 dummy;
+} __packed;
+
+struct wal_dbg_stats {
+	struct wal_dbg_tx_stats tx;
+	struct wal_dbg_rx_stats rx;
+	struct wal_dbg_peer_stats peer;
+} __packed;
+
+enum wmi_stats_id {
+	WMI_REQUEST_PEER_STAT	= 0x01,
+	WMI_REQUEST_AP_STAT	= 0x02
+};
+
+struct wmi_request_stats_cmd {
+	__le32 stats_id;
+
+	/*
+	 * Space to add parameters like
+	 * peer mac addr
+	 */
+} __packed;
+
+/* Suspend option */
+enum {
+	/* suspend */
+	WMI_PDEV_SUSPEND,
+
+	/* suspend and disable all interrupts */
+	WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
+};
+
+struct wmi_pdev_suspend_cmd {
+	/* suspend option sent to target */
+	__le32 suspend_opt;
+} __packed;
+
+struct wmi_stats_event {
+	__le32 stats_id; /* %WMI_REQUEST_ */
+	/*
+	 * number of pdev stats event structures
+	 * (wmi_pdev_stats) 0 or 1
+	 */
+	__le32 num_pdev_stats;
+	/*
+	 * number of vdev stats event structures
+	 * (wmi_vdev_stats) 0 or max vdevs
+	 */
+	__le32 num_vdev_stats;
+	/*
+	 * number of peer stats event structures
+	 * (wmi_peer_stats) 0 or max peers
+	 */
+	__le32 num_peer_stats;
+	__le32 num_bcnflt_stats;
+	/*
+	 * followed by
+	 *   num_pdev_stats * size of(struct wmi_pdev_stats)
+	 *   num_vdev_stats * size of(struct wmi_vdev_stats)
+	 *   num_peer_stats * size of(struct wmi_peer_stats)
+	 *
+	 *  By having a zero sized array, the pointer to data area
+	 *  becomes available without increasing the struct size
+	 */
+	u8 data[0];
+} __packed;
+
+/*
+ * PDEV statistics
+ * TODO: add all PDEV stats here
+ */
+struct wmi_pdev_stats {
+	__le32 chan_nf;        /* Channel noise floor */
+	__le32 tx_frame_count; /* TX frame count */
+	__le32 rx_frame_count; /* RX frame count */
+	__le32 rx_clear_count; /* rx clear count */
+	__le32 cycle_count;    /* cycle count */
+	__le32 phy_err_count;  /* Phy error count */
+	__le32 chan_tx_pwr;    /* channel tx power */
+	struct wal_dbg_stats wal; /* WAL dbg stats */
+} __packed;
+
+/*
+ * VDEV statistics
+ * TODO: add all VDEV stats here
+ */
+struct wmi_vdev_stats {
+	__le32 vdev_id;
+} __packed;
+
+/*
+ * peer statistics.
+ * TODO: add more stats
+ */
+struct wmi_peer_stats {
+	struct wmi_mac_addr peer_macaddr;
+	__le32 peer_rssi;
+	__le32 peer_tx_rate;
+} __packed;
+
+struct wmi_vdev_create_cmd {
+	__le32 vdev_id;
+	__le32 vdev_type;
+	__le32 vdev_subtype;
+	struct wmi_mac_addr vdev_macaddr;
+} __packed;
+
+enum wmi_vdev_type {
+	WMI_VDEV_TYPE_AP      = 1,
+	WMI_VDEV_TYPE_STA     = 2,
+	WMI_VDEV_TYPE_IBSS    = 3,
+	WMI_VDEV_TYPE_MONITOR = 4,
+};
+
+enum wmi_vdev_subtype {
+	WMI_VDEV_SUBTYPE_NONE       = 0,
+	WMI_VDEV_SUBTYPE_P2P_DEVICE = 1,
+	WMI_VDEV_SUBTYPE_P2P_CLIENT = 2,
+	WMI_VDEV_SUBTYPE_P2P_GO     = 3,
+};
+
+/* values for vdev_subtype */
+
+/* values for vdev_start_request flags */
+/*
+ * Indicates that AP VDEV uses hidden ssid. only valid for
+ *  AP/GO */
+#define WMI_VDEV_START_HIDDEN_SSID  (1<<0)
+/*
+ * Indicates if robust management frame/management frame
+ *  protection is enabled. For GO/AP vdevs, it indicates that
+ *  it may support station/client associations with RMF enabled.
+ *  For STA/client vdevs, it indicates that sta will
+ *  associate with AP with RMF enabled. */
+#define WMI_VDEV_START_PMF_ENABLED  (1<<1)
+
+struct wmi_p2p_noa_descriptor {
+	__le32 type_count; /* 255: continuous schedule, 0: reserved */
+	__le32 duration;  /* Absent period duration in micro seconds */
+	__le32 interval;   /* Absent period interval in micro seconds */
+	__le32 start_time; /* 32 bit tsf time when in starts */
+} __packed;
+
+struct wmi_vdev_start_request_cmd {
+	/* WMI channel */
+	struct wmi_channel chan;
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+	/* requestor id identifying the caller module */
+	__le32 requestor_id;
+	/* beacon interval from received beacon */
+	__le32 beacon_interval;
+	/* DTIM Period from the received beacon */
+	__le32 dtim_period;
+	/* Flags */
+	__le32 flags;
+	/* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
+	struct wmi_ssid ssid;
+	/* beacon/probe reponse xmit rate. Applicable for SoftAP. */
+	__le32 bcn_tx_rate;
+	/* beacon/probe reponse xmit power. Applicable for SoftAP. */
+	__le32 bcn_tx_power;
+	/* number of p2p NOA descriptor(s) from scan entry */
+	__le32 num_noa_descriptors;
+	/*
+	 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
+	 * During CAC, Our HW shouldn't ack ditected frames
+	 */
+	__le32 disable_hw_ack;
+	/* actual p2p NOA descriptor from scan entry */
+	struct wmi_p2p_noa_descriptor noa_descriptors[2];
+} __packed;
+
+struct wmi_vdev_restart_request_cmd {
+	struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
+} __packed;
+
+struct wmi_vdev_start_request_arg {
+	u32 vdev_id;
+	struct wmi_channel_arg channel;
+	u32 bcn_intval;
+	u32 dtim_period;
+	u8 *ssid;
+	u32 ssid_len;
+	u32 bcn_tx_rate;
+	u32 bcn_tx_power;
+	bool disable_hw_ack;
+	bool hidden_ssid;
+	bool pmf_enabled;
+};
+
+struct wmi_vdev_delete_cmd {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_up_cmd {
+	__le32 vdev_id;
+	__le32 vdev_assoc_id;
+	struct wmi_mac_addr vdev_bssid;
+} __packed;
+
+struct wmi_vdev_stop_cmd {
+	__le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_down_cmd {
+	__le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_standby_response_cmd {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_resume_response_cmd {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_set_param_cmd {
+	__le32 vdev_id;
+	__le32 param_id;
+	__le32 param_value;
+} __packed;
+
+#define WMI_MAX_KEY_INDEX   3
+#define WMI_MAX_KEY_LEN     32
+
+#define WMI_KEY_PAIRWISE 0x00
+#define WMI_KEY_GROUP    0x01
+#define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
+
+struct wmi_key_seq_counter {
+	__le32 key_seq_counter_l;
+	__le32 key_seq_counter_h;
+} __packed;
+
+#define WMI_CIPHER_NONE     0x0 /* clear key */
+#define WMI_CIPHER_WEP      0x1
+#define WMI_CIPHER_TKIP     0x2
+#define WMI_CIPHER_AES_OCB  0x3
+#define WMI_CIPHER_AES_CCM  0x4
+#define WMI_CIPHER_WAPI     0x5
+#define WMI_CIPHER_CKIP     0x6
+#define WMI_CIPHER_AES_CMAC 0x7
+
+struct wmi_vdev_install_key_cmd {
+	__le32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	__le32 key_idx;
+	__le32 key_flags;
+	__le32 key_cipher; /* %WMI_CIPHER_ */
+	struct wmi_key_seq_counter key_rsc_counter;
+	struct wmi_key_seq_counter key_global_rsc_counter;
+	struct wmi_key_seq_counter key_tsc_counter;
+	u8 wpi_key_rsc_counter[16];
+	u8 wpi_key_tsc_counter[16];
+	__le32 key_len;
+	__le32 key_txmic_len;
+	__le32 key_rxmic_len;
+
+	/* contains key followed by tx mic followed by rx mic */
+	u8 key_data[0];
+} __packed;
+
+struct wmi_vdev_install_key_arg {
+	u32 vdev_id;
+	const u8 *macaddr;
+	u32 key_idx;
+	u32 key_flags;
+	u32 key_cipher;
+	u32 key_len;
+	u32 key_txmic_len;
+	u32 key_rxmic_len;
+	const void *key_data;
+};
+
+/* Preamble types to be used with VDEV fixed rate configuration */
+enum wmi_rate_preamble {
+	WMI_RATE_PREAMBLE_OFDM,
+	WMI_RATE_PREAMBLE_CCK,
+	WMI_RATE_PREAMBLE_HT,
+	WMI_RATE_PREAMBLE_VHT,
+};
+
+/* Value to disable fixed rate setting */
+#define WMI_FIXED_RATE_NONE    (0xff)
+
+/* the definition of different VDEV parameters */
+enum wmi_vdev_param {
+	/* RTS Threshold */
+	WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
+	/* Fragmentation threshold */
+	WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+	/* beacon interval in TUs */
+	WMI_VDEV_PARAM_BEACON_INTERVAL,
+	/* Listen interval in TUs */
+	WMI_VDEV_PARAM_LISTEN_INTERVAL,
+	/* muticast rate in Mbps */
+	WMI_VDEV_PARAM_MULTICAST_RATE,
+	/* management frame rate in Mbps */
+	WMI_VDEV_PARAM_MGMT_TX_RATE,
+	/* slot time (long vs short) */
+	WMI_VDEV_PARAM_SLOT_TIME,
+	/* preamble (long vs short) */
+	WMI_VDEV_PARAM_PREAMBLE,
+	/* SWBA time (time before tbtt in msec) */
+	WMI_VDEV_PARAM_SWBA_TIME,
+	/* time period for updating VDEV stats */
+	WMI_VDEV_STATS_UPDATE_PERIOD,
+	/* age out time in msec for frames queued for station in power save */
+	WMI_VDEV_PWRSAVE_AGEOUT_TIME,
+	/*
+	 * Host SWBA interval (time in msec before tbtt for SWBA event
+	 * generation).
+	 */
+	WMI_VDEV_HOST_SWBA_INTERVAL,
+	/* DTIM period (specified in units of num beacon intervals) */
+	WMI_VDEV_PARAM_DTIM_PERIOD,
+	/*
+	 * scheduler air time limit for this VDEV. used by off chan
+	 * scheduler.
+	 */
+	WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
+	/* enable/dsiable WDS for this VDEV  */
+	WMI_VDEV_PARAM_WDS,
+	/* ATIM Window */
+	WMI_VDEV_PARAM_ATIM_WINDOW,
+	/* BMISS max */
+	WMI_VDEV_PARAM_BMISS_COUNT_MAX,
+	/* BMISS first time */
+	WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
+	/* BMISS final time */
+	WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
+	/* WMM enables/disabled */
+	WMI_VDEV_PARAM_FEATURE_WMM,
+	/* Channel width */
+	WMI_VDEV_PARAM_CHWIDTH,
+	/* Channel Offset */
+	WMI_VDEV_PARAM_CHEXTOFFSET,
+	/* Disable HT Protection */
+	WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
+	/* Quick STA Kickout */
+	WMI_VDEV_PARAM_STA_QUICKKICKOUT,
+	/* Rate to be used with Management frames */
+	WMI_VDEV_PARAM_MGMT_RATE,
+	/* Protection Mode */
+	WMI_VDEV_PARAM_PROTECTION_MODE,
+	/* Fixed rate setting */
+	WMI_VDEV_PARAM_FIXED_RATE,
+	/* Short GI Enable/Disable */
+	WMI_VDEV_PARAM_SGI,
+	/* Enable LDPC */
+	WMI_VDEV_PARAM_LDPC,
+	/* Enable Tx STBC */
+	WMI_VDEV_PARAM_TX_STBC,
+	/* Enable Rx STBC */
+	WMI_VDEV_PARAM_RX_STBC,
+	/* Intra BSS forwarding  */
+	WMI_VDEV_PARAM_INTRA_BSS_FWD,
+	/* Setting Default xmit key for Vdev */
+	WMI_VDEV_PARAM_DEF_KEYID,
+	/* NSS width */
+	WMI_VDEV_PARAM_NSS,
+	/* Set the custom rate for the broadcast data frames */
+	WMI_VDEV_PARAM_BCAST_DATA_RATE,
+	/* Set the custom rate (rate-code) for multicast data frames */
+	WMI_VDEV_PARAM_MCAST_DATA_RATE,
+	/* Tx multicast packet indicate Enable/Disable */
+	WMI_VDEV_PARAM_MCAST_INDICATE,
+	/* Tx DHCP packet indicate Enable/Disable */
+	WMI_VDEV_PARAM_DHCP_INDICATE,
+	/* Enable host inspection of Tx unicast packet to unknown destination */
+	WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
+
+	/* The minimum amount of time AP begins to consider STA inactive */
+	WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
+
+	/*
+	 * An associated STA is considered inactive when there is no recent
+	 * TX/RX activity and no downlink frames are buffered for it. Once a
+	 * STA exceeds the maximum idle inactive time, the AP will send an
+	 * 802.11 data-null as a keep alive to verify the STA is still
+	 * associated. If the STA does ACK the data-null, or if the data-null
+	 * is buffered and the STA does not retrieve it, the STA will be
+	 * considered unresponsive
+	 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
+	 */
+	WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
+
+	/*
+	 * An associated STA is considered unresponsive if there is no recent
+	 * TX/RX activity and downlink frames are buffered for it. Once a STA
+	 * exceeds the maximum unresponsive time, the AP will send a
+	 * WMI_STA_KICKOUT event to the host so the STA can be deleted. */
+	WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
+
+	/* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
+	WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
+	/* Enable/Disable RTS-CTS */
+	WMI_VDEV_PARAM_ENABLE_RTSCTS,
+	/* Enable TXBFee/er */
+	WMI_VDEV_PARAM_TXBF,
+
+	/* Set packet power save */
+	WMI_VDEV_PARAM_PACKET_POWERSAVE,
+
+	/*
+	 * Drops un-encrypted packets if eceived in an encrypted connection
+	 * otherwise forwards to host.
+	 */
+	WMI_VDEV_PARAM_DROP_UNENCRY,
+
+	/*
+	 * Set the encapsulation type for frames.
+	 */
+	WMI_VDEV_PARAM_TX_ENCAP_TYPE,
+};
+
+/* slot time long */
+#define WMI_VDEV_SLOT_TIME_LONG		0x1
+/* slot time short */
+#define WMI_VDEV_SLOT_TIME_SHORT	0x2
+/* preablbe long */
+#define WMI_VDEV_PREAMBLE_LONG		0x1
+/* preablbe short */
+#define WMI_VDEV_PREAMBLE_SHORT		0x2
+
+enum wmi_start_event_param {
+	WMI_VDEV_RESP_START_EVENT = 0,
+	WMI_VDEV_RESP_RESTART_EVENT,
+};
+
+struct wmi_vdev_start_response_event {
+	__le32 vdev_id;
+	__le32 req_id;
+	__le32 resp_type; /* %WMI_VDEV_RESP_ */
+	__le32 status;
+} __packed;
+
+struct wmi_vdev_standby_req_event {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_resume_req_event {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_stopped_event {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+} __packed;
+
+/*
+ * common structure used for simple events
+ * (stopped, resume_req, standby response)
+ */
+struct wmi_vdev_simple_event {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+} __packed;
+
+/* VDEV start response status codes */
+/* VDEV succesfully started */
+#define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS	0x0
+
+/* requested VDEV not found */
+#define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID	0x1
+
+/* unsupported VDEV combination */
+#define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED	0x2
+
+/* Beacon processing related command and event structures */
+struct wmi_bcn_tx_hdr {
+	__le32 vdev_id;
+	__le32 tx_rate;
+	__le32 tx_power;
+	__le32 bcn_len;
+} __packed;
+
+struct wmi_bcn_tx_cmd {
+	struct wmi_bcn_tx_hdr hdr;
+	u8 *bcn[0];
+} __packed;
+
+struct wmi_bcn_tx_arg {
+	u32 vdev_id;
+	u32 tx_rate;
+	u32 tx_power;
+	u32 bcn_len;
+	const void *bcn;
+};
+
+/* Beacon filter */
+#define WMI_BCN_FILTER_ALL   0 /* Filter all beacons */
+#define WMI_BCN_FILTER_NONE  1 /* Pass all beacons */
+#define WMI_BCN_FILTER_RSSI  2 /* Pass Beacons RSSI >= RSSI threshold */
+#define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
+#define WMI_BCN_FILTER_SSID  4 /* Pass Beacons with matching SSID */
+
+struct wmi_bcn_filter_rx_cmd {
+	/* Filter ID */
+	__le32 bcn_filter_id;
+	/* Filter type - wmi_bcn_filter */
+	__le32 bcn_filter;
+	/* Buffer len */
+	__le32 bcn_filter_len;
+	/* Filter info (threshold, BSSID, RSSI) */
+	u8 *bcn_filter_buf;
+} __packed;
+
+/* Capabilities and IEs to be passed to firmware */
+struct wmi_bcn_prb_info {
+	/* Capabilities */
+	__le32 caps;
+	/* ERP info */
+	__le32 erp;
+	/* Advanced capabilities */
+	/* HT capabilities */
+	/* HT Info */
+	/* ibss_dfs */
+	/* wpa Info */
+	/* rsn Info */
+	/* rrm info */
+	/* ath_ext */
+	/* app IE */
+} __packed;
+
+struct wmi_bcn_tmpl_cmd {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+	/* TIM IE offset from the beginning of the template. */
+	__le32 tim_ie_offset;
+	/* beacon probe capabilities and IEs */
+	struct wmi_bcn_prb_info bcn_prb_info;
+	/* beacon buffer length */
+	__le32 buf_len;
+	/* variable length data */
+	u8 data[1];
+} __packed;
+
+struct wmi_prb_tmpl_cmd {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+	/* beacon probe capabilities and IEs */
+	struct wmi_bcn_prb_info bcn_prb_info;
+	/* beacon buffer length */
+	__le32 buf_len;
+	/* Variable length data */
+	u8 data[1];
+} __packed;
+
+enum wmi_sta_ps_mode {
+	/* enable power save for the given STA VDEV */
+	WMI_STA_PS_MODE_DISABLED = 0,
+	/* disable power save  for a given STA VDEV */
+	WMI_STA_PS_MODE_ENABLED = 1,
+};
+
+struct wmi_sta_powersave_mode_cmd {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+
+	/*
+	 * Power save mode
+	 * (see enum wmi_sta_ps_mode)
+	 */
+	__le32 sta_ps_mode;
+} __packed;
+
+enum wmi_csa_offload_en {
+	WMI_CSA_OFFLOAD_DISABLE = 0,
+	WMI_CSA_OFFLOAD_ENABLE = 1,
+};
+
+struct wmi_csa_offload_enable_cmd {
+	__le32 vdev_id;
+	__le32 csa_offload_enable;
+} __packed;
+
+struct wmi_csa_offload_chanswitch_cmd {
+	__le32 vdev_id;
+	struct wmi_channel chan;
+} __packed;
+
+/*
+ * This parameter controls the policy for retrieving frames from AP while the
+ * STA is in sleep state.
+ *
+ * Only takes affect if the sta_ps_mode is enabled
+ */
+enum wmi_sta_ps_param_rx_wake_policy {
+	/*
+	 * Wake up when ever there is an  RX activity on the VDEV. In this mode
+	 * the Power save SM(state machine) will come out of sleep by either
+	 * sending null frame (or) a data frame (with PS==0) in response to TIM
+	 * bit set in the received beacon frame from AP.
+	 */
+	WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
+
+	/*
+	 * Here the power save state machine will not wakeup in response to TIM
+	 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
+	 * configuration setup by WMISET_PS_SET_UAPSD  WMI command.  When all
+	 * access categories are delivery-enabled, the station will send a
+	 * UAPSD trigger frame, otherwise it will send a PS-Poll.
+	 */
+	WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
+};
+
+/*
+ * Number of tx frames/beacon  that cause the power save SM to wake up.
+ *
+ * Value 1 causes the SM to wake up for every TX. Value 0 has a special
+ * meaning, It will cause the SM to never wake up. This is useful if you want
+ * to keep the system to sleep all the time for some kind of test mode . host
+ * can change this parameter any time.  It will affect at the next tx frame.
+ */
+enum wmi_sta_ps_param_tx_wake_threshold {
+	WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
+	WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
+
+	/*
+	 * Values greater than one indicate that many TX attempts per beacon
+	 * interval before the STA will wake up
+	 */
+};
+
+/*
+ * The maximum number of PS-Poll frames the FW will send in response to
+ * traffic advertised in TIM before waking up (by sending a null frame with PS
+ * = 0). Value 0 has a special meaning: there is no maximum count and the FW
+ * will send as many PS-Poll as are necessary to retrieve buffered BU. This
+ * parameter is used when the RX wake policy is
+ * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
+ * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
+ */
+enum wmi_sta_ps_param_pspoll_count {
+	WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
+	/*
+	 * Values greater than 0 indicate the maximum numer of PS-Poll frames
+	 * FW will send before waking up.
+	 */
+};
+
+/*
+ * This will include the delivery and trigger enabled state for every AC.
+ * This is the negotiated state with AP. The host MLME needs to set this based
+ * on AP capability and the state Set in the association request by the
+ * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
+ */
+#define WMI_UAPSD_AC_TYPE_DELI 0
+#define WMI_UAPSD_AC_TYPE_TRIG 1
+
+#define WMI_UAPSD_AC_BIT_MASK(ac, type) \
+	((type ==  WMI_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) : (1<<((ac<<1)+1)))
+
+enum wmi_sta_ps_param_uapsd {
+	WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
+	WMI_STA_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
+	WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
+	WMI_STA_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
+	WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
+	WMI_STA_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
+	WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
+	WMI_STA_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
+};
+
+enum wmi_sta_powersave_param {
+	/*
+	 * Controls how frames are retrievd from AP while STA is sleeping
+	 *
+	 * (see enum wmi_sta_ps_param_rx_wake_policy)
+	 */
+	WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
+
+	/*
+	 * The STA will go active after this many TX
+	 *
+	 * (see enum wmi_sta_ps_param_tx_wake_threshold)
+	 */
+	WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
+
+	/*
+	 * Number of PS-Poll to send before STA wakes up
+	 *
+	 * (see enum wmi_sta_ps_param_pspoll_count)
+	 *
+	 */
+	WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
+
+	/*
+	 * TX/RX inactivity time in msec before going to sleep.
+	 *
+	 * The power save SM will monitor tx/rx activity on the VDEV, if no
+	 * activity for the specified msec of the parameter the Power save
+	 * SM will go to sleep.
+	 */
+	WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
+
+	/*
+	 * Set uapsd configuration.
+	 *
+	 * (see enum wmi_sta_ps_param_uapsd)
+	 */
+	WMI_STA_PS_PARAM_UAPSD = 4,
+};
+
+struct wmi_sta_powersave_param_cmd {
+	__le32 vdev_id;
+	__le32 param_id; /* %WMI_STA_PS_PARAM_ */
+	__le32 param_value;
+} __packed;
+
+/* No MIMO power save */
+#define WMI_STA_MIMO_PS_MODE_DISABLE
+/* mimo powersave mode static*/
+#define WMI_STA_MIMO_PS_MODE_STATIC
+/* mimo powersave mode dynamic */
+#define WMI_STA_MIMO_PS_MODE_DYNAMIC
+
+struct wmi_sta_mimo_ps_mode_cmd {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+	/* mimo powersave mode as defined above */
+	__le32 mimo_pwrsave_mode;
+} __packed;
+
+/* U-APSD configuration of peer station from (re)assoc request and TSPECs */
+enum wmi_ap_ps_param_uapsd {
+	WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
+	WMI_AP_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
+	WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
+	WMI_AP_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
+	WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
+	WMI_AP_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
+	WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
+	WMI_AP_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
+};
+
+/* U-APSD maximum service period of peer station */
+enum wmi_ap_ps_peer_param_max_sp {
+	WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
+	WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
+	WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
+	WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
+	MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
+};
+
+/*
+ * AP power save parameter
+ * Set a power save specific parameter for a peer station
+ */
+enum wmi_ap_ps_peer_param {
+	/* Set uapsd configuration for a given peer.
+	 *
+	 * Include the delivery and trigger enabled state for every AC.
+	 * The host  MLME needs to set this based on AP capability and stations
+	 * request Set in the association request  received from the station.
+	 *
+	 * Lower 8 bits of the value specify the UAPSD configuration.
+	 *
+	 * (see enum wmi_ap_ps_param_uapsd)
+	 * The default value is 0.
+	 */
+	WMI_AP_PS_PEER_PARAM_UAPSD = 0,
+
+	/*
+	 * Set the service period for a UAPSD capable station
+	 *
+	 * The service period from wme ie in the (re)assoc request frame.
+	 *
+	 * (see enum wmi_ap_ps_peer_param_max_sp)
+	 */
+	WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
+
+	/* Time in seconds for aging out buffered frames for STA in PS */
+	WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
+};
+
+struct wmi_ap_ps_peer_cmd {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+
+	/* peer MAC address */
+	struct wmi_mac_addr peer_macaddr;
+
+	/* AP powersave param (see enum wmi_ap_ps_peer_param) */
+	__le32 param_id;
+
+	/* AP powersave param value */
+	__le32 param_value;
+} __packed;
+
+/* 128 clients = 4 words */
+#define WMI_TIM_BITMAP_ARRAY_SIZE 4
+
+struct wmi_tim_info {
+	__le32 tim_len;
+	__le32 tim_mcast;
+	__le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
+	__le32 tim_changed;
+	__le32 tim_num_ps_pending;
+} __packed;
+
+/* Maximum number of NOA Descriptors supported */
+#define WMI_P2P_MAX_NOA_DESCRIPTORS 4
+#define WMI_P2P_OPPPS_ENABLE_BIT	BIT(0)
+#define WMI_P2P_OPPPS_CTWINDOW_OFFSET	1
+#define WMI_P2P_NOA_CHANGED_BIT	BIT(0)
+
+struct wmi_p2p_noa_info {
+	/* Bit 0 - Flag to indicate an update in NOA schedule
+	   Bits 7-1 - Reserved */
+	u8 changed;
+	/* NOA index */
+	u8 index;
+	/* Bit 0 - Opp PS state of the AP
+	   Bits 1-7 - Ctwindow in TUs */
+	u8 ctwindow_oppps;
+	/* Number of NOA descriptors */
+	u8 num_descriptors;
+
+	struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
+} __packed;
+
+struct wmi_bcn_info {
+	struct wmi_tim_info tim_info;
+	struct wmi_p2p_noa_info p2p_noa_info;
+} __packed;
+
+struct wmi_host_swba_event {
+	__le32 vdev_map;
+	struct wmi_bcn_info bcn_info[1];
+} __packed;
+
+#define WMI_MAX_AP_VDEV 16
+
+struct wmi_tbtt_offset_event {
+	__le32 vdev_map;
+	__le32 tbttoffset_list[WMI_MAX_AP_VDEV];
+} __packed;
+
+
+struct wmi_peer_create_cmd {
+	__le32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+} __packed;
+
+struct wmi_peer_delete_cmd {
+	__le32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+} __packed;
+
+struct wmi_peer_flush_tids_cmd {
+	__le32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	__le32 peer_tid_bitmap;
+} __packed;
+
+struct wmi_fixed_rate {
+	/*
+	 * rate mode . 0: disable fixed rate (auto rate)
+	 *   1: legacy (non 11n) rate  specified as ieee rate 2*Mbps
+	 *   2: ht20 11n rate  specified as mcs index
+	 *   3: ht40 11n rate  specified as mcs index
+	 */
+	__le32  rate_mode;
+	/*
+	 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
+	 * and series 3 is stored at byte 3 (MSB)
+	 */
+	__le32  rate_series;
+	/*
+	 * 4 retry counts for 4 rate series. retry count for rate 0 is stored
+	 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
+	 * (MSB)
+	 */
+	__le32  rate_retries;
+} __packed;
+
+struct wmi_peer_fixed_rate_cmd {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+	/* peer MAC address */
+	struct wmi_mac_addr peer_macaddr;
+	/* fixed rate */
+	struct wmi_fixed_rate peer_fixed_rate;
+} __packed;
+
+#define WMI_MGMT_TID    17
+
+struct wmi_addba_clear_resp_cmd {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+	/* peer MAC address */
+	struct wmi_mac_addr peer_macaddr;
+} __packed;
+
+struct wmi_addba_send_cmd {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+	/* peer MAC address */
+	struct wmi_mac_addr peer_macaddr;
+	/* Tid number */
+	__le32 tid;
+	/* Buffer/Window size*/
+	__le32 buffersize;
+} __packed;
+
+struct wmi_delba_send_cmd {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+	/* peer MAC address */
+	struct wmi_mac_addr peer_macaddr;
+	/* Tid number */
+	__le32 tid;
+	/* Is Initiator */
+	__le32 initiator;
+	/* Reason code */
+	__le32 reasoncode;
+} __packed;
+
+struct wmi_addba_setresponse_cmd {
+	/* unique id identifying the vdev, generated by the caller */
+	__le32 vdev_id;
+	/* peer mac address */
+	struct wmi_mac_addr peer_macaddr;
+	/* Tid number */
+	__le32 tid;
+	/* status code */
+	__le32 statuscode;
+} __packed;
+
+struct wmi_send_singleamsdu_cmd {
+	/* unique id identifying the vdev, generated by the caller */
+	__le32 vdev_id;
+	/* peer mac address */
+	struct wmi_mac_addr peer_macaddr;
+	/* Tid number */
+	__le32 tid;
+} __packed;
+
+enum wmi_peer_smps_state {
+	WMI_PEER_SMPS_PS_NONE = 0x0,
+	WMI_PEER_SMPS_STATIC  = 0x1,
+	WMI_PEER_SMPS_DYNAMIC = 0x2
+};
+
+enum wmi_peer_param {
+	WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
+	WMI_PEER_AMPDU      = 0x2,
+	WMI_PEER_AUTHORIZE  = 0x3,
+	WMI_PEER_CHAN_WIDTH = 0x4,
+	WMI_PEER_NSS        = 0x5,
+	WMI_PEER_USE_4ADDR  = 0x6
+};
+
+struct wmi_peer_set_param_cmd {
+	__le32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	__le32 param_id;
+	__le32 param_value;
+} __packed;
+
+#define MAX_SUPPORTED_RATES 128
+
+struct wmi_rate_set {
+	/* total number of rates */
+	__le32 num_rates;
+	/*
+	 * rates (each 8bit value) packed into a 32 bit word.
+	 * the rates are filled from least significant byte to most
+	 * significant byte.
+	 */
+	__le32 rates[(MAX_SUPPORTED_RATES/4)+1];
+} __packed;
+
+struct wmi_rate_set_arg {
+	unsigned int num_rates;
+	u8 rates[MAX_SUPPORTED_RATES];
+};
+
+/*
+ * NOTE: It would bea good idea to represent the Tx MCS
+ * info in one word and Rx in another word. This is split
+ * into multiple words for convenience
+ */
+struct wmi_vht_rate_set {
+	__le32 rx_max_rate; /* Max Rx data rate */
+	__le32 rx_mcs_set;  /* Negotiated RX VHT rates */
+	__le32 tx_max_rate; /* Max Tx data rate */
+	__le32 tx_mcs_set;  /* Negotiated TX VHT rates */
+} __packed;
+
+struct wmi_vht_rate_set_arg {
+	u32 rx_max_rate;
+	u32 rx_mcs_set;
+	u32 tx_max_rate;
+	u32 tx_mcs_set;
+};
+
+struct wmi_peer_set_rates_cmd {
+	/* peer MAC address */
+	struct wmi_mac_addr peer_macaddr;
+	/* legacy rate set */
+	struct wmi_rate_set peer_legacy_rates;
+	/* ht rate set */
+	struct wmi_rate_set peer_ht_rates;
+} __packed;
+
+struct wmi_peer_set_q_empty_callback_cmd {
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+	/* peer MAC address */
+	struct wmi_mac_addr peer_macaddr;
+	__le32 callback_enable;
+} __packed;
+
+#define WMI_PEER_AUTH           0x00000001
+#define WMI_PEER_QOS            0x00000002
+#define WMI_PEER_NEED_PTK_4_WAY 0x00000004
+#define WMI_PEER_NEED_GTK_2_WAY 0x00000010
+#define WMI_PEER_APSD           0x00000800
+#define WMI_PEER_HT             0x00001000
+#define WMI_PEER_40MHZ          0x00002000
+#define WMI_PEER_STBC           0x00008000
+#define WMI_PEER_LDPC           0x00010000
+#define WMI_PEER_DYN_MIMOPS     0x00020000
+#define WMI_PEER_STATIC_MIMOPS  0x00040000
+#define WMI_PEER_SPATIAL_MUX    0x00200000
+#define WMI_PEER_VHT            0x02000000
+#define WMI_PEER_80MHZ          0x04000000
+#define WMI_PEER_PMF            0x08000000
+
+/*
+ * Peer rate capabilities.
+ *
+ * This is of interest to the ratecontrol
+ * module which resides in the firmware. The bit definitions are
+ * consistent with that defined in if_athrate.c.
+ */
+#define WMI_RC_DS_FLAG          0x01
+#define WMI_RC_CW40_FLAG        0x02
+#define WMI_RC_SGI_FLAG         0x04
+#define WMI_RC_HT_FLAG          0x08
+#define WMI_RC_RTSCTS_FLAG      0x10
+#define WMI_RC_TX_STBC_FLAG     0x20
+#define WMI_RC_RX_STBC_FLAG     0xC0
+#define WMI_RC_RX_STBC_FLAG_S   6
+#define WMI_RC_WEP_TKIP_FLAG    0x100
+#define WMI_RC_TS_FLAG          0x200
+#define WMI_RC_UAPSD_FLAG       0x400
+
+/* Maximum listen interval supported by hw in units of beacon interval */
+#define ATH10K_MAX_HW_LISTEN_INTERVAL 5
+
+struct wmi_peer_assoc_complete_cmd {
+	struct wmi_mac_addr peer_macaddr;
+	__le32 vdev_id;
+	__le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
+	__le32 peer_associd; /* 16 LSBs */
+	__le32 peer_flags;
+	__le32 peer_caps; /* 16 LSBs */
+	__le32 peer_listen_intval;
+	__le32 peer_ht_caps;
+	__le32 peer_max_mpdu;
+	__le32 peer_mpdu_density; /* 0..16 */
+	__le32 peer_rate_caps;
+	struct wmi_rate_set peer_legacy_rates;
+	struct wmi_rate_set peer_ht_rates;
+	__le32 peer_nss; /* num of spatial streams */
+	__le32 peer_vht_caps;
+	__le32 peer_phymode;
+	struct wmi_vht_rate_set peer_vht_rates;
+	/* HT Operation Element of the peer. Five bytes packed in 2
+	 *  INT32 array and filled from lsb to msb. */
+	__le32 peer_ht_info[2];
+} __packed;
+
+struct wmi_peer_assoc_complete_arg {
+	u8 addr[ETH_ALEN];
+	u32 vdev_id;
+	bool peer_reassoc;
+	u16 peer_aid;
+	u32 peer_flags; /* see %WMI_PEER_ */
+	u16 peer_caps;
+	u32 peer_listen_intval;
+	u32 peer_ht_caps;
+	u32 peer_max_mpdu;
+	u32 peer_mpdu_density; /* 0..16 */
+	u32 peer_rate_caps; /* see %WMI_RC_ */
+	struct wmi_rate_set_arg peer_legacy_rates;
+	struct wmi_rate_set_arg peer_ht_rates;
+	u32 peer_num_spatial_streams;
+	u32 peer_vht_caps;
+	enum wmi_phy_mode peer_phymode;
+	struct wmi_vht_rate_set_arg peer_vht_rates;
+};
+
+struct wmi_peer_add_wds_entry_cmd {
+	/* peer MAC address */
+	struct wmi_mac_addr peer_macaddr;
+	/* wds MAC addr */
+	struct wmi_mac_addr wds_macaddr;
+} __packed;
+
+struct wmi_peer_remove_wds_entry_cmd {
+	/* wds MAC addr */
+	struct wmi_mac_addr wds_macaddr;
+} __packed;
+
+struct wmi_peer_q_empty_callback_event {
+	/* peer MAC address */
+	struct wmi_mac_addr peer_macaddr;
+} __packed;
+
+/*
+ * Channel info WMI event
+ */
+struct wmi_chan_info_event {
+	__le32 err_code;
+	__le32 freq;
+	__le32 cmd_flags;
+	__le32 noise_floor;
+	__le32 rx_clear_count;
+	__le32 cycle_count;
+} __packed;
+
+/* Beacon filter wmi command info */
+#define BCN_FLT_MAX_SUPPORTED_IES	256
+#define BCN_FLT_MAX_ELEMS_IE_LIST	(BCN_FLT_MAX_SUPPORTED_IES / 32)
+
+struct bss_bcn_stats {
+	__le32 vdev_id;
+	__le32 bss_bcnsdropped;
+	__le32 bss_bcnsdelivered;
+} __packed;
+
+struct bcn_filter_stats {
+	__le32 bcns_dropped;
+	__le32 bcns_delivered;
+	__le32 activefilters;
+	struct bss_bcn_stats bss_stats;
+} __packed;
+
+struct wmi_add_bcn_filter_cmd {
+	u32 vdev_id;
+	u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
+} __packed;
+
+enum wmi_sta_keepalive_method {
+	WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
+	WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
+};
+
+/* note: ip4 addresses are in network byte order, i.e. big endian */
+struct wmi_sta_keepalive_arp_resp {
+	__be32 src_ip4_addr;
+	__be32 dest_ip4_addr;
+	struct wmi_mac_addr dest_mac_addr;
+} __packed;
+
+struct wmi_sta_keepalive_cmd {
+	__le32 vdev_id;
+	__le32 enabled;
+	__le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
+	__le32 interval; /* in seconds */
+	struct wmi_sta_keepalive_arp_resp arp_resp;
+} __packed;
+
+#define ATH10K_RTS_MAX		2347
+#define ATH10K_FRAGMT_THRESHOLD_MIN	540
+#define ATH10K_FRAGMT_THRESHOLD_MAX	2346
+
+#define WMI_MAX_EVENT 0x1000
+/* Maximum number of pending TXed WMI packets */
+#define WMI_MAX_PENDING_TX_COUNT 128
+#define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
+
+/* By default disable power save for IBSS */
+#define ATH10K_DEFAULT_ATIM 0
+
+struct ath10k;
+struct ath10k_vif;
+
+int ath10k_wmi_attach(struct ath10k *ar);
+void ath10k_wmi_detach(struct ath10k *ar);
+int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
+int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
+void ath10k_wmi_flush_tx(struct ath10k *ar);
+
+int ath10k_wmi_connect_htc_service(struct ath10k *ar);
+int ath10k_wmi_pdev_set_channel(struct ath10k *ar,
+				const struct wmi_channel_arg *);
+int ath10k_wmi_pdev_suspend_target(struct ath10k *ar);
+int ath10k_wmi_pdev_resume_target(struct ath10k *ar);
+int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g,
+				  u16 rd5g, u16 ctl2g, u16 ctl5g);
+int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id,
+			      u32 value);
+int ath10k_wmi_cmd_init(struct ath10k *ar);
+int ath10k_wmi_start_scan(struct ath10k *ar, const struct wmi_start_scan_arg *);
+void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *);
+int ath10k_wmi_stop_scan(struct ath10k *ar,
+			 const struct wmi_stop_scan_arg *arg);
+int ath10k_wmi_vdev_create(struct ath10k *ar, u32 vdev_id,
+			   enum wmi_vdev_type type,
+			   enum wmi_vdev_subtype subtype,
+			   const u8 macaddr[ETH_ALEN]);
+int ath10k_wmi_vdev_delete(struct ath10k *ar, u32 vdev_id);
+int ath10k_wmi_vdev_start(struct ath10k *ar,
+			  const struct wmi_vdev_start_request_arg *);
+int ath10k_wmi_vdev_restart(struct ath10k *ar,
+			    const struct wmi_vdev_start_request_arg *);
+int ath10k_wmi_vdev_stop(struct ath10k *ar, u32 vdev_id);
+int ath10k_wmi_vdev_up(struct ath10k *ar, u32 vdev_id, u32 aid,
+		       const u8 *bssid);
+int ath10k_wmi_vdev_down(struct ath10k *ar, u32 vdev_id);
+int ath10k_wmi_vdev_set_param(struct ath10k *ar, u32 vdev_id,
+			      enum wmi_vdev_param param_id, u32 param_value);
+int ath10k_wmi_vdev_install_key(struct ath10k *ar,
+				const struct wmi_vdev_install_key_arg *arg);
+int ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id,
+		    const u8 peer_addr[ETH_ALEN]);
+int ath10k_wmi_peer_delete(struct ath10k *ar, u32 vdev_id,
+		    const u8 peer_addr[ETH_ALEN]);
+int ath10k_wmi_peer_flush(struct ath10k *ar, u32 vdev_id,
+		   const u8 peer_addr[ETH_ALEN], u32 tid_bitmap);
+int ath10k_wmi_peer_set_param(struct ath10k *ar, u32 vdev_id,
+			      const u8 *peer_addr,
+			      enum wmi_peer_param param_id, u32 param_value);
+int ath10k_wmi_peer_assoc(struct ath10k *ar,
+			  const struct wmi_peer_assoc_complete_arg *arg);
+int ath10k_wmi_set_psmode(struct ath10k *ar, u32 vdev_id,
+			  enum wmi_sta_ps_mode psmode);
+int ath10k_wmi_set_sta_ps_param(struct ath10k *ar, u32 vdev_id,
+				enum wmi_sta_powersave_param param_id,
+				u32 value);
+int ath10k_wmi_set_ap_ps_param(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+			       enum wmi_ap_ps_peer_param param_id, u32 value);
+int ath10k_wmi_scan_chan_list(struct ath10k *ar,
+			      const struct wmi_scan_chan_list_arg *arg);
+int ath10k_wmi_beacon_send(struct ath10k *ar, const struct wmi_bcn_tx_arg *arg);
+int ath10k_wmi_pdev_set_wmm_params(struct ath10k *ar,
+			const struct wmi_pdev_set_wmm_params_arg *arg);
+int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id);
+
+#endif /* _WMI_H_ */
-- 
cgit v1.2.3


From 80b4205bc1da3fdcb665f43d1a7fbbb202e9cd41 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 4 Jun 2013 15:41:30 +0530
Subject: ath9k: Fix OFDM weak signal detection for AP mode

The commit "ath9k_hw: improve ANI processing and rx desensitizing parameters"
changed the OFDM weak signal detection logic to disable it
for AP mode, which is not allowed. Fix this and enable it always
for AP mode.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index e91725bf401c..3ec4c5388c28 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -177,10 +177,15 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel,
 	    BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_HIGH)
 		weak_sig = true;
 
-	if (aniState->ofdmWeakSigDetect != weak_sig)
-			ath9k_hw_ani_control(ah,
-				ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
-				entry_ofdm->ofdm_weak_signal_on);
+	/*
+	 * OFDM Weak signal detection is always enabled for AP mode.
+	 */
+	if (ah->opmode != NL80211_IFTYPE_AP &&
+	    aniState->ofdmWeakSigDetect != weak_sig) {
+		ath9k_hw_ani_control(ah,
+				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+				     entry_ofdm->ofdm_weak_signal_on);
+	}
 
 	if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) {
 		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
-- 
cgit v1.2.3


From a04eb985f18b7e0f3b071a29600ebc4741475ce9 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 4 Jun 2013 15:41:31 +0530
Subject: ath9k: Fix ANI monitoring

The commit "ath9k_hw: improve ANI processing and rx desensitizing parameters"
changed various ANI operational parameters to address a specific
card/environment. This is not really applicable for other cards
in general usage.

As per internal documentation, lowering the immunity level can be
done only after 5 periods have passed and the CCK/OFDM errors are
below the low watermak threshold - which have been fixed at 300 and
400 respectively by the sytems team.

Raising the immunity level can be done when CCK/OFDM errors exceed
600 and 1000 (per second).

Set these values once during attach.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 29 +++++++++++++++++------------
 drivers/net/wireless/ath/ath9k/ani.h |  2 --
 2 files changed, 17 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 3ec4c5388c28..1520e5508210 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -186,14 +186,6 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel,
 				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
 				     entry_ofdm->ofdm_weak_signal_on);
 	}
-
-	if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) {
-		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
-		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI;
-	} else {
-		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI;
-		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
-	}
 }
 
 static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
@@ -439,12 +431,25 @@ void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan)
 		ofdmPhyErrRate, aniState->cckNoiseImmunityLevel,
 		cckPhyErrRate, aniState->ofdmsTurn);
 
-	if (aniState->listenTime > ah->aniperiod) {
-		if (cckPhyErrRate < ah->config.cck_trig_low &&
-		    ofdmPhyErrRate < ah->config.ofdm_trig_low) {
+	if (aniState->listenTime > 5 * ah->aniperiod) {
+		/*
+		 * Check if we need to lower immunity if
+		 * 5 ani_periods have passed.
+		 */
+		if (ofdmPhyErrRate <= ah->config.ofdm_trig_low &&
+		    cckPhyErrRate <= ah->config.cck_trig_low) {
 			ath9k_hw_ani_lower_immunity(ah);
 			aniState->ofdmsTurn = !aniState->ofdmsTurn;
-		} else if (ofdmPhyErrRate > ah->config.ofdm_trig_high) {
+		}
+		ath9k_ani_restart(ah);
+	} else if (aniState->listenTime > ah->aniperiod) {
+		/*
+		 * Check if immunity has to be raised,
+		 * (either OFDM or CCK).
+		 */
+		if (ofdmPhyErrRate > ah->config.ofdm_trig_high &&
+		    (cckPhyErrRate <= ah->config.cck_trig_high ||
+		     aniState->ofdmsTurn)) {
 			ath9k_hw_ani_ofdm_err_trigger(ah);
 			aniState->ofdmsTurn = false;
 		} else if (cckPhyErrRate > ah->config.cck_trig_high) {
diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index 78b9fa9f6455..10884728d30e 100644
--- a/drivers/net/wireless/ath/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
@@ -21,11 +21,9 @@
 
 /* units are errors per second */
 #define ATH9K_ANI_OFDM_TRIG_HIGH          3500
-#define ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI 1000
 
 /* units are errors per second */
 #define ATH9K_ANI_OFDM_TRIG_LOW           400
-#define ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI 900
 
 /* units are errors per second */
 #define ATH9K_ANI_CCK_TRIG_HIGH           600
-- 
cgit v1.2.3


From b99553fb60c1a1d3569993fdb5e21fb7214dbbf0 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 4 Jun 2013 15:41:32 +0530
Subject: ath9k: Fix ANI levels

The commit, "ath9k_hw: improve ANI processing and rx desensitizing parameters"
modified the immunity level tables for both CCK and OFDM. Fix them
so that the tables are in sync with the internal driver/codebase.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 1520e5508210..c8595f41b298 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -46,8 +46,8 @@ static const struct ani_ofdm_level_entry ofdm_level_table[] = {
 	{  5,  4,  1  }, /* lvl 5 */
 	{  6,  5,  1  }, /* lvl 6 */
 	{  7,  6,  1  }, /* lvl 7 */
-	{  7,  6,  0  }, /* lvl 8 */
-	{  7,  7,  0  }  /* lvl 9 */
+	{  7,  7,  1  }, /* lvl 8 */
+	{  7,  8,  0  }  /* lvl 9 */
 };
 #define ATH9K_ANI_OFDM_NUM_LEVEL \
 	ARRAY_SIZE(ofdm_level_table)
@@ -91,8 +91,8 @@ static const struct ani_cck_level_entry cck_level_table[] = {
 	{  4,  0  }, /* lvl 4 */
 	{  5,  0  }, /* lvl 5 */
 	{  6,  0  }, /* lvl 6 */
-	{  6,  0  }, /* lvl 7 (only for high rssi) */
-	{  7,  0  }  /* lvl 8 (only for high rssi) */
+	{  7,  0  }, /* lvl 7 (only for high rssi) */
+	{  8,  0  }  /* lvl 8 (only for high rssi) */
 };
 
 #define ATH9K_ANI_CCK_NUM_LEVEL \
-- 
cgit v1.2.3


From ff23e0845b1ba33ec2ee25989758e2cf3df6d4c5 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 4 Jun 2013 15:41:33 +0530
Subject: ath9k: Fix ofdm weak signal configuration

The commit, "ath9k_hw: improve ANI processing and rx desensitizing parameters"
removed code setting various phy registers holding threshold values.

This is likely required for OFDM weak signal detection to function
correctly, so add them, but skip AR9462 and AR9565.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_phy.c | 60 +++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 83e03857c014..bc483128efcd 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -906,6 +906,11 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_channel *chan = ah->curchan;
 	struct ar5416AniState *aniState = &ah->ani;
+	int m1ThreshLow, m2ThreshLow;
+	int m1Thresh, m2Thresh;
+	int m2CountThr, m2CountThrLow;
+	int m1ThreshLowExt, m2ThreshLowExt;
+	int m1ThreshExt, m2ThreshExt;
 	s32 value, value2;
 
 	switch (cmd & ah->ani_function) {
@@ -919,6 +924,61 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 		 */
 		u32 on = param ? 1 : 0;
 
+		if (AR_SREV_9462(ah) || AR_SREV_9565(ah))
+			goto skip_ws_det;
+
+		m1ThreshLow = on ?
+			aniState->iniDef.m1ThreshLow : m1ThreshLow_off;
+		m2ThreshLow = on ?
+			aniState->iniDef.m2ThreshLow : m2ThreshLow_off;
+		m1Thresh = on ?
+			aniState->iniDef.m1Thresh : m1Thresh_off;
+		m2Thresh = on ?
+			aniState->iniDef.m2Thresh : m2Thresh_off;
+		m2CountThr = on ?
+			aniState->iniDef.m2CountThr : m2CountThr_off;
+		m2CountThrLow = on ?
+			aniState->iniDef.m2CountThrLow : m2CountThrLow_off;
+		m1ThreshLowExt = on ?
+			aniState->iniDef.m1ThreshLowExt : m1ThreshLowExt_off;
+		m2ThreshLowExt = on ?
+			aniState->iniDef.m2ThreshLowExt : m2ThreshLowExt_off;
+		m1ThreshExt = on ?
+			aniState->iniDef.m1ThreshExt : m1ThreshExt_off;
+		m2ThreshExt = on ?
+			aniState->iniDef.m2ThreshExt : m2ThreshExt_off;
+
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
+			      AR_PHY_SFCORR_LOW_M1_THRESH_LOW,
+			      m1ThreshLow);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
+			      AR_PHY_SFCORR_LOW_M2_THRESH_LOW,
+			      m2ThreshLow);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR,
+			      AR_PHY_SFCORR_M1_THRESH,
+			      m1Thresh);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR,
+			      AR_PHY_SFCORR_M2_THRESH,
+			      m2Thresh);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR,
+			      AR_PHY_SFCORR_M2COUNT_THR,
+			      m2CountThr);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
+			      AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW,
+			      m2CountThrLow);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+			      AR_PHY_SFCORR_EXT_M1_THRESH_LOW,
+			      m1ThreshLowExt);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+			      AR_PHY_SFCORR_EXT_M2_THRESH_LOW,
+			      m2ThreshLowExt);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+			      AR_PHY_SFCORR_EXT_M1_THRESH,
+			      m1ThreshExt);
+		REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+			      AR_PHY_SFCORR_EXT_M2_THRESH,
+			      m2ThreshExt);
+skip_ws_det:
 		if (on)
 			REG_SET_BIT(ah, AR_PHY_SFCORR_LOW,
 				    AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
-- 
cgit v1.2.3


From 50a0f5bc3075b37ccaad97780d4b9238309fdf15 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 4 Jun 2013 15:41:34 +0530
Subject: ath9k: Remove redundant code

The phy error mask registers are programmed already
in ath9k_ani_restart(), so there is no need to set them
in ath9k_ani_reset().

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index c8595f41b298..a68beb19ce4d 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -360,18 +360,7 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
 	ath9k_hw_set_ofdm_nil(ah, ofdm_nil, is_scanning);
 	ath9k_hw_set_cck_nil(ah, cck_nil, is_scanning);
 
-	/*
-	 * enable phy counters if hw supports or if not, enable phy
-	 * interrupts (so we can count each one)
-	 */
 	ath9k_ani_restart(ah);
-
-	ENABLE_REGWRITE_BUFFER(ah);
-
-	REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
-	REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
-
-	REGWRITE_BUFFER_FLUSH(ah);
 }
 
 static bool ath9k_hw_ani_read_counters(struct ath_hw *ah)
-- 
cgit v1.2.3


From 057c1dd6cd5041e3b6a6fb65708ac5a4d9c12b36 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 4 Jun 2013 15:41:35 +0530
Subject: ath9k: Remove unused ANI macros

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.h | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index 10884728d30e..b75aea23b313 100644
--- a/drivers/net/wireless/ath/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
@@ -21,17 +21,10 @@
 
 /* units are errors per second */
 #define ATH9K_ANI_OFDM_TRIG_HIGH          3500
-
-/* units are errors per second */
 #define ATH9K_ANI_OFDM_TRIG_LOW           400
-
-/* units are errors per second */
 #define ATH9K_ANI_CCK_TRIG_HIGH           600
-
-/* units are errors per second */
 #define ATH9K_ANI_CCK_TRIG_LOW            300
 
-#define ATH9K_ANI_NOISE_IMMUNE_LVL        4
 #define ATH9K_ANI_SPUR_IMMUNE_LVL         3
 #define ATH9K_ANI_FIRSTEP_LVL             2
 
@@ -43,10 +36,6 @@
 /* in ms */
 #define ATH9K_ANI_POLLINTERVAL            1000
 
-#define HAL_NOISE_IMMUNE_MAX              4
-#define HAL_SPUR_IMMUNE_MAX               7
-#define HAL_FIRST_STEP_MAX                2
-
 #define ATH9K_SIG_FIRSTEP_SETTING_MIN     0
 #define ATH9K_SIG_FIRSTEP_SETTING_MAX     20
 #define ATH9K_SIG_SPUR_IMM_SETTING_MIN    0
-- 
cgit v1.2.3


From 568f7a438f6d5f0f0909c94e66b7c5c8b96ebf7a Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 4 Jun 2013 13:40:38 +0200
Subject: rt2x00: rt2x00queue: add priv_size field to struct data_queue

Add a new field into struct data_queue and store
the size of the per-queue_entry private data in
that. Additionally, use the new field in the
rt2x00queue_alloc_entries function to compute
the size of the queue entries for a given queue.

The patch does not change the current behaviour
but makes it possible to remove the queue_desc
parameter of the rt2x00queue_alloc_entries function.
That will be done by a subsequent patch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00queue.c | 5 +++--
 drivers/net/wireless/rt2x00/rt2x00queue.h | 2 ++
 2 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 5efbbbdca701..7f938a513f3a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -1173,7 +1173,7 @@ static int rt2x00queue_alloc_entries(struct data_queue *queue,
 	/*
 	 * Allocate all queue entries.
 	 */
-	entry_size = sizeof(*entries) + qdesc->priv_size;
+	entry_size = sizeof(*entries) + queue->priv_size;
 	entries = kcalloc(queue->limit, entry_size, GFP_KERNEL);
 	if (!entries)
 		return -ENOMEM;
@@ -1189,7 +1189,7 @@ static int rt2x00queue_alloc_entries(struct data_queue *queue,
 		entries[i].entry_idx = i;
 		entries[i].priv_data =
 		    QUEUE_ENTRY_PRIV_OFFSET(entries, i, queue->limit,
-					    sizeof(*entries), qdesc->priv_size);
+					    sizeof(*entries), queue->priv_size);
 	}
 
 #undef QUEUE_ENTRY_PRIV_OFFSET
@@ -1329,6 +1329,7 @@ static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev,
 	queue->data_size = qdesc->data_size;
 	queue->desc_size = qdesc->desc_size;
 	queue->winfo_size = qdesc->winfo_size;
+	queue->priv_size = qdesc->priv_size;
 }
 
 int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev)
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 4a7b34e9261b..2cf4903ce112 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -453,6 +453,7 @@ enum data_queue_flags {
  * @cw_max: The cw max value for outgoing frames (field ignored in RX queue).
  * @data_size: Maximum data size for the frames in this queue.
  * @desc_size: Hardware descriptor size for the data in this queue.
+ * @priv_size: Size of per-queue_entry private data.
  * @usb_endpoint: Device endpoint used for communication (USB only)
  * @usb_maxpacket: Max packet size for given endpoint (USB only)
  */
@@ -481,6 +482,7 @@ struct data_queue {
 	unsigned short data_size;
 	unsigned char  desc_size;
 	unsigned char  winfo_size;
+	unsigned short priv_size;
 
 	unsigned short usb_endpoint;
 	unsigned short usb_maxpacket;
-- 
cgit v1.2.3


From 15d6c07929a2efa8802b5cc9bb8c91bdf5ba219b Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 4 Jun 2013 13:40:39 +0200
Subject: rt2x00: rt2x00queue: remove qdesc parameter of
 rt2x00queue_alloc_entries

The qdesc parameter is not used anymore, so remove that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00queue.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 7f938a513f3a..c12d1c8ae618 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -1161,8 +1161,7 @@ void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev)
 	}
 }
 
-static int rt2x00queue_alloc_entries(struct data_queue *queue,
-				     const struct data_queue_desc *qdesc)
+static int rt2x00queue_alloc_entries(struct data_queue *queue)
 {
 	struct queue_entry *entries;
 	unsigned int entry_size;
@@ -1231,23 +1230,22 @@ int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev)
 	struct data_queue *queue;
 	int status;
 
-	status = rt2x00queue_alloc_entries(rt2x00dev->rx, rt2x00dev->ops->rx);
+	status = rt2x00queue_alloc_entries(rt2x00dev->rx);
 	if (status)
 		goto exit;
 
 	tx_queue_for_each(rt2x00dev, queue) {
-		status = rt2x00queue_alloc_entries(queue, rt2x00dev->ops->tx);
+		status = rt2x00queue_alloc_entries(queue);
 		if (status)
 			goto exit;
 	}
 
-	status = rt2x00queue_alloc_entries(rt2x00dev->bcn, rt2x00dev->ops->bcn);
+	status = rt2x00queue_alloc_entries(rt2x00dev->bcn);
 	if (status)
 		goto exit;
 
 	if (test_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags)) {
-		status = rt2x00queue_alloc_entries(rt2x00dev->atim,
-						   rt2x00dev->ops->atim);
+		status = rt2x00queue_alloc_entries(rt2x00dev->atim);
 		if (status)
 			goto exit;
 	}
-- 
cgit v1.2.3


From 56e8256351c358d7a2003f6fe10dcb5e2bc394f7 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 4 Jun 2013 13:40:40 +0200
Subject: rt2x00: rt2x00dev: use rt2x00dev->bcn->limit

The beacon data queue is initialized already,
so fetch the number of the queue entries from
that instead of using the entry_num field of
the data queue descriptor.

The two values are the same, and the use of the
rt2x00dev->bcn->limit value allows us to get rid
of a superfluous pointer dereference.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 6a201725bc50..dff5012f0548 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1336,7 +1336,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 	 * beacon entries.
 	 */
 	rt2x00dev->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
-	if (rt2x00dev->ops->bcn->entry_num > 0)
+	if (rt2x00dev->bcn->limit > 0)
 		rt2x00dev->hw->wiphy->interface_modes |=
 		    BIT(NL80211_IFTYPE_ADHOC) |
 		    BIT(NL80211_IFTYPE_AP) |
-- 
cgit v1.2.3


From 04453e9bda9da510e79c66f56ab463215d042aa8 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 4 Jun 2013 13:40:41 +0200
Subject: rt2x00: rt2x00queue: setup queue->threshold from queue->limit

Use the queue->limit value instead of the
qdesc->entry_num to compute the threshold.
The two source values are the same and the
data queue descriptor structure will be
removed by a later patch.

Also separate the computation from the rest
of the init code to make further changes
easier.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00queue.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index c12d1c8ae618..3ae2264fdabc 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -1323,11 +1323,12 @@ static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev,
 	BUG_ON(!qdesc);
 
 	queue->limit = qdesc->entry_num;
-	queue->threshold = DIV_ROUND_UP(qdesc->entry_num, 10);
 	queue->data_size = qdesc->data_size;
 	queue->desc_size = qdesc->desc_size;
 	queue->winfo_size = qdesc->winfo_size;
 	queue->priv_size = qdesc->priv_size;
+
+	queue->threshold = DIV_ROUND_UP(queue->limit, 10);
 }
 
 int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev)
-- 
cgit v1.2.3


From 25bf6ce41d2692db2e991447015fb4bfbf3c3982 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 4 Jun 2013 13:40:42 +0200
Subject: rt2x00: add queue_init callback to rt2x00_ops

The driver uses static data structures for initializing
specific fields of a given data queue. These static
queue data descriptor structures are containing values
which related to a given chipset.

Even though the values are chip specific, the actual
selection of the used structure is based on device
specific vendor/product identifiers. This approach works,
but it is not always reliable. Sometimes the vendor and/or
device IDs of the PCI and USB devices contains improper
values which makes it impossible to select the correct
structure for such devices.

The patch adds a new callback to tr2x00_ops which
is called after the chipset detection is finished.
This allows the drivers to do dynamic initialization
of the data_queue structure for a given queue based
on the actual chipset.

After each driver implements the queue_init callback,
the data_queue_desc structure will be removed.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00.h      |  1 +
 drivers/net/wireless/rt2x00/rt2x00queue.c | 22 +++++++++++++---------
 2 files changed, 14 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 7510723a8c37..2d2db6472c04 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -653,6 +653,7 @@ struct rt2x00_ops {
 	const struct data_queue_desc *tx;
 	const struct data_queue_desc *bcn;
 	const struct data_queue_desc *atim;
+	void (*queue_init)(struct data_queue *queue);
 	const struct rt2x00lib_ops *lib;
 	const void *drv;
 	const struct ieee80211_ops *hw;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 3ae2264fdabc..2a99ff1714ac 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -1306,8 +1306,6 @@ rt2x00queue_get_qdesc_by_qid(struct rt2x00_dev *rt2x00dev,
 static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev,
 			     struct data_queue *queue, enum data_queue_qid qid)
 {
-	const struct data_queue_desc *qdesc;
-
 	mutex_init(&queue->status_lock);
 	spin_lock_init(&queue->tx_lock);
 	spin_lock_init(&queue->index_lock);
@@ -1319,14 +1317,20 @@ static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev,
 	queue->cw_min = 5;
 	queue->cw_max = 10;
 
-	qdesc = rt2x00queue_get_qdesc_by_qid(rt2x00dev, qid);
-	BUG_ON(!qdesc);
+	if (rt2x00dev->ops->queue_init) {
+		rt2x00dev->ops->queue_init(queue);
+	} else {
+		const struct data_queue_desc *qdesc;
+
+		qdesc = rt2x00queue_get_qdesc_by_qid(rt2x00dev, qid);
+		BUG_ON(!qdesc);
 
-	queue->limit = qdesc->entry_num;
-	queue->data_size = qdesc->data_size;
-	queue->desc_size = qdesc->desc_size;
-	queue->winfo_size = qdesc->winfo_size;
-	queue->priv_size = qdesc->priv_size;
+		queue->limit = qdesc->entry_num;
+		queue->data_size = qdesc->data_size;
+		queue->desc_size = qdesc->desc_size;
+		queue->winfo_size = qdesc->winfo_size;
+		queue->priv_size = qdesc->priv_size;
+	}
 
 	queue->threshold = DIV_ROUND_UP(queue->limit, 10);
 }
-- 
cgit v1.2.3


From d36d13a3ec1ef25c411d39c1e14dd2cdff98edbb Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 4 Jun 2013 13:40:43 +0200
Subject: rt2x00: rt2800usb: implement queue_init callback

The generic rt2x00 code has been changed to allow the
drivers toimplement dynamic data_queue initialization.

Remove the static data queue descriptor structures
and implement the queue_init callback instead.

The actual chipset is already known when the callback
is used. This allows us to use a single callback for
all supported devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800usb.c | 100 +++++++++++++++-----------------
 1 file changed, 48 insertions(+), 52 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index c71a48da9a31..b81d5098816a 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -849,29 +849,54 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 	.sta_remove		= rt2800_sta_remove,
 };
 
-static const struct data_queue_desc rt2800usb_queue_rx = {
-	.entry_num		= 128,
-	.data_size		= AGGREGATION_SIZE,
-	.desc_size		= RXINFO_DESC_SIZE,
-	.winfo_size		= RXWI_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_usb),
-};
+static void rt2800usb_queue_init(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	unsigned short txwi_size, rxwi_size;
 
-static const struct data_queue_desc rt2800usb_queue_tx = {
-	.entry_num		= 16,
-	.data_size		= AGGREGATION_SIZE,
-	.desc_size		= TXINFO_DESC_SIZE,
-	.winfo_size		= TXWI_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_usb),
-};
+	if (rt2x00_rt(rt2x00dev, RT5592)) {
+		txwi_size = TXWI_DESC_SIZE_5592;
+		rxwi_size = RXWI_DESC_SIZE_5592;
+	} else {
+		txwi_size = TXWI_DESC_SIZE;
+		rxwi_size = RXWI_DESC_SIZE;
+	}
 
-static const struct data_queue_desc rt2800usb_queue_bcn = {
-	.entry_num		= 8,
-	.data_size		= MGMT_FRAME_SIZE,
-	.desc_size		= TXINFO_DESC_SIZE,
-	.winfo_size		= TXWI_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_usb),
-};
+	switch (queue->qid) {
+	case QID_RX:
+		queue->limit = 128;
+		queue->data_size = AGGREGATION_SIZE;
+		queue->desc_size = RXINFO_DESC_SIZE;
+		queue->winfo_size = rxwi_size;
+		queue->priv_size = sizeof(struct queue_entry_priv_usb);
+		break;
+
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_AC_BE:
+	case QID_AC_BK:
+		queue->limit = 16;
+		queue->data_size = AGGREGATION_SIZE;
+		queue->desc_size = TXINFO_DESC_SIZE;
+		queue->winfo_size = txwi_size;
+		queue->priv_size = sizeof(struct queue_entry_priv_usb);
+		break;
+
+	case QID_BEACON:
+		queue->limit = 8;
+		queue->data_size = MGMT_FRAME_SIZE;
+		queue->desc_size = TXINFO_DESC_SIZE;
+		queue->winfo_size = txwi_size;
+		queue->priv_size = sizeof(struct queue_entry_priv_usb);
+		break;
+
+	case QID_ATIM:
+		/* fallthrough */
+	default:
+		BUG();
+		break;
+	}
+}
 
 static const struct rt2x00_ops rt2800usb_ops = {
 	.name			= KBUILD_MODNAME,
@@ -881,9 +906,7 @@ static const struct rt2x00_ops rt2800usb_ops = {
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
 	.extra_tx_headroom	= TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
-	.rx			= &rt2800usb_queue_rx,
-	.tx			= &rt2800usb_queue_tx,
-	.bcn			= &rt2800usb_queue_bcn,
+	.queue_init		= rt2800usb_queue_init,
 	.lib			= &rt2800usb_rt2x00_ops,
 	.drv			= &rt2800usb_rt2800_ops,
 	.hw			= &rt2800usb_mac80211_ops,
@@ -892,31 +915,6 @@ static const struct rt2x00_ops rt2800usb_ops = {
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 };
 
-static const struct data_queue_desc rt2800usb_queue_rx_5592 = {
-	.entry_num		= 128,
-	.data_size		= AGGREGATION_SIZE,
-	.desc_size		= RXINFO_DESC_SIZE,
-	.winfo_size		= RXWI_DESC_SIZE_5592,
-	.priv_size		= sizeof(struct queue_entry_priv_usb),
-};
-
-static const struct data_queue_desc rt2800usb_queue_tx_5592 = {
-	.entry_num		= 16,
-	.data_size		= AGGREGATION_SIZE,
-	.desc_size		= TXINFO_DESC_SIZE,
-	.winfo_size		= TXWI_DESC_SIZE_5592,
-	.priv_size		= sizeof(struct queue_entry_priv_usb),
-};
-
-static const struct data_queue_desc rt2800usb_queue_bcn_5592 = {
-	.entry_num		= 8,
-	.data_size		= MGMT_FRAME_SIZE,
-	.desc_size		= TXINFO_DESC_SIZE,
-	.winfo_size		= TXWI_DESC_SIZE_5592,
-	.priv_size		= sizeof(struct queue_entry_priv_usb),
-};
-
-
 static const struct rt2x00_ops rt2800usb_ops_5592 = {
 	.name			= KBUILD_MODNAME,
 	.drv_data_size		= sizeof(struct rt2800_drv_data),
@@ -925,9 +923,7 @@ static const struct rt2x00_ops rt2800usb_ops_5592 = {
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
 	.extra_tx_headroom	= TXINFO_DESC_SIZE + TXWI_DESC_SIZE_5592,
-	.rx			= &rt2800usb_queue_rx_5592,
-	.tx			= &rt2800usb_queue_tx_5592,
-	.bcn			= &rt2800usb_queue_bcn_5592,
+	.queue_init		= rt2800usb_queue_init,
 	.lib			= &rt2800usb_rt2x00_ops,
 	.drv			= &rt2800usb_rt2800_ops,
 	.hw			= &rt2800usb_mac80211_ops,
-- 
cgit v1.2.3


From 1896b760c3024e90db3b3577bf0ed31c008a3543 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 4 Jun 2013 13:40:44 +0200
Subject: rt2x00: rt2800pci: implement queue_init callback

The generic rt2x00 code has been changed to allow the
drivers toimplement dynamic data_queue initialization.

Remove the static data queue descriptor structures
and implement the queue_init callback instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800pci.c | 60 ++++++++++++++++++++-------------
 1 file changed, 36 insertions(+), 24 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 330f1d25726d..260c8b4d7399 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1186,29 +1186,43 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
 	.sta_remove		= rt2800_sta_remove,
 };
 
-static const struct data_queue_desc rt2800pci_queue_rx = {
-	.entry_num		= 128,
-	.data_size		= AGGREGATION_SIZE,
-	.desc_size		= RXD_DESC_SIZE,
-	.winfo_size		= RXWI_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+static void rt2800pci_queue_init(struct data_queue *queue)
+{
+	switch (queue->qid) {
+	case QID_RX:
+		queue->limit = 128;
+		queue->data_size = AGGREGATION_SIZE;
+		queue->desc_size = RXD_DESC_SIZE;
+		queue->winfo_size = RXWI_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
 
-static const struct data_queue_desc rt2800pci_queue_tx = {
-	.entry_num		= 64,
-	.data_size		= AGGREGATION_SIZE,
-	.desc_size		= TXD_DESC_SIZE,
-	.winfo_size		= TXWI_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_AC_BE:
+	case QID_AC_BK:
+		queue->limit = 64;
+		queue->data_size = AGGREGATION_SIZE;
+		queue->desc_size = TXD_DESC_SIZE;
+		queue->winfo_size = TXWI_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
 
-static const struct data_queue_desc rt2800pci_queue_bcn = {
-	.entry_num		= 8,
-	.data_size		= 0, /* No DMA required for beacons */
-	.desc_size		= TXD_DESC_SIZE,
-	.winfo_size		= TXWI_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+	case QID_BEACON:
+		queue->limit = 8;
+		queue->data_size = 0; /* No DMA required for beacons */
+		queue->desc_size = TXD_DESC_SIZE;
+		queue->winfo_size = TXWI_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
+
+	case QID_ATIM:
+		/* fallthrough */
+	default:
+		BUG();
+		break;
+	}
+}
 
 static const struct rt2x00_ops rt2800pci_ops = {
 	.name			= KBUILD_MODNAME,
@@ -1218,9 +1232,7 @@ static const struct rt2x00_ops rt2800pci_ops = {
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
 	.extra_tx_headroom	= TXWI_DESC_SIZE,
-	.rx			= &rt2800pci_queue_rx,
-	.tx			= &rt2800pci_queue_tx,
-	.bcn			= &rt2800pci_queue_bcn,
+	.queue_init		= rt2800pci_queue_init,
 	.lib			= &rt2800pci_rt2x00_ops,
 	.drv			= &rt2800pci_rt2800_ops,
 	.hw			= &rt2800pci_mac80211_ops,
-- 
cgit v1.2.3


From 0d7aada3bcbc0bde68379831d29c1a015f2fd613 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 4 Jun 2013 13:40:45 +0200
Subject: rt2x00: rt73usb: implement queue_init callback

The generic rt2x00 code has been changed to allow the
drivers toimplement dynamic data_queue initialization.

Remove the static data queue descriptor structures
and implement the queue_init callback instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt73usb.c | 54 +++++++++++++++++++++--------------
 1 file changed, 33 insertions(+), 21 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 377e09bb0b81..b2e346a482cc 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2359,26 +2359,40 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
 	.config			= rt73usb_config,
 };
 
-static const struct data_queue_desc rt73usb_queue_rx = {
-	.entry_num		= 32,
-	.data_size		= DATA_FRAME_SIZE,
-	.desc_size		= RXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_usb),
-};
+static void rt73usb_queue_init(struct data_queue *queue)
+{
+	switch (queue->qid) {
+	case QID_RX:
+		queue->limit = 32;
+		queue->data_size = DATA_FRAME_SIZE;
+		queue->desc_size = RXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_usb);
+		break;
 
-static const struct data_queue_desc rt73usb_queue_tx = {
-	.entry_num		= 32,
-	.data_size		= DATA_FRAME_SIZE,
-	.desc_size		= TXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_usb),
-};
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_AC_BE:
+	case QID_AC_BK:
+		queue->limit = 32;
+		queue->data_size = DATA_FRAME_SIZE;
+		queue->desc_size = TXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_usb);
+		break;
 
-static const struct data_queue_desc rt73usb_queue_bcn = {
-	.entry_num		= 4,
-	.data_size		= MGMT_FRAME_SIZE,
-	.desc_size		= TXINFO_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_usb),
-};
+	case QID_BEACON:
+		queue->limit = 4;
+		queue->data_size = MGMT_FRAME_SIZE;
+		queue->desc_size = TXINFO_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_usb);
+		break;
+
+	case QID_ATIM:
+		/* fallthrough */
+	default:
+		BUG();
+		break;
+	}
+}
 
 static const struct rt2x00_ops rt73usb_ops = {
 	.name			= KBUILD_MODNAME,
@@ -2387,9 +2401,7 @@ static const struct rt2x00_ops rt73usb_ops = {
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
 	.extra_tx_headroom	= TXD_DESC_SIZE,
-	.rx			= &rt73usb_queue_rx,
-	.tx			= &rt73usb_queue_tx,
-	.bcn			= &rt73usb_queue_bcn,
+	.queue_init		= rt73usb_queue_init,
 	.lib			= &rt73usb_rt2x00_ops,
 	.hw			= &rt73usb_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-- 
cgit v1.2.3


From 3d8979ba7d873cd203bf98a17a2143a20eef488c Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 4 Jun 2013 13:40:46 +0200
Subject: rt2x00: rt2400pci: implement queue_init callback

The generic rt2x00 code has been changed to allow the
drivers toimplement dynamic data_queue initialization.

Remove the static data queue descriptor structures
and implement the queue_init callback instead.

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2400pci.c | 65 +++++++++++++++++++--------------
 1 file changed, 37 insertions(+), 28 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index f7143733d7e9..e1ec9a4517d1 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1767,33 +1767,45 @@ static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
 	.config			= rt2400pci_config,
 };
 
-static const struct data_queue_desc rt2400pci_queue_rx = {
-	.entry_num		= 24,
-	.data_size		= DATA_FRAME_SIZE,
-	.desc_size		= RXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+static void rt2400pci_queue_init(struct data_queue *queue)
+{
+	switch (queue->qid) {
+	case QID_RX:
+		queue->limit = 24;
+		queue->data_size = DATA_FRAME_SIZE;
+		queue->desc_size = RXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
 
-static const struct data_queue_desc rt2400pci_queue_tx = {
-	.entry_num		= 24,
-	.data_size		= DATA_FRAME_SIZE,
-	.desc_size		= TXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_AC_BE:
+	case QID_AC_BK:
+		queue->limit = 24;
+		queue->data_size = DATA_FRAME_SIZE;
+		queue->desc_size = TXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
 
-static const struct data_queue_desc rt2400pci_queue_bcn = {
-	.entry_num		= 1,
-	.data_size		= MGMT_FRAME_SIZE,
-	.desc_size		= TXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+	case QID_BEACON:
+		queue->limit = 1;
+		queue->data_size = MGMT_FRAME_SIZE;
+		queue->desc_size = TXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
 
-static const struct data_queue_desc rt2400pci_queue_atim = {
-	.entry_num		= 8,
-	.data_size		= DATA_FRAME_SIZE,
-	.desc_size		= TXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+	case QID_ATIM:
+		queue->limit = 8;
+		queue->data_size = DATA_FRAME_SIZE;
+		queue->desc_size = TXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
+
+	default:
+		BUG();
+		break;
+	}
+}
 
 static const struct rt2x00_ops rt2400pci_ops = {
 	.name			= KBUILD_MODNAME,
@@ -1802,10 +1814,7 @@ static const struct rt2x00_ops rt2400pci_ops = {
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
 	.extra_tx_headroom	= 0,
-	.rx			= &rt2400pci_queue_rx,
-	.tx			= &rt2400pci_queue_tx,
-	.bcn			= &rt2400pci_queue_bcn,
-	.atim			= &rt2400pci_queue_atim,
+	.queue_init		= rt2400pci_queue_init,
 	.lib			= &rt2400pci_rt2x00_ops,
 	.hw			= &rt2400pci_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-- 
cgit v1.2.3


From 7c030821ede91bca94b425d27afd504842bb1865 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 4 Jun 2013 13:40:47 +0200
Subject: rt2x00: rt2500pci: implement queue_init callback

The generic rt2x00 code has been changed to allow the
drivers toimplement dynamic data_queue initialization.

Remove the static data queue descriptor structures
and implement the queue_init callback instead.

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2500pci.c | 65 +++++++++++++++++++--------------
 1 file changed, 37 insertions(+), 28 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 77e45b223d15..a1670e8967ed 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -2056,33 +2056,45 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
 	.config			= rt2500pci_config,
 };
 
-static const struct data_queue_desc rt2500pci_queue_rx = {
-	.entry_num		= 32,
-	.data_size		= DATA_FRAME_SIZE,
-	.desc_size		= RXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+static void rt2500pci_queue_init(struct data_queue *queue)
+{
+	switch (queue->qid) {
+	case QID_RX:
+		queue->limit = 32;
+		queue->data_size = DATA_FRAME_SIZE;
+		queue->desc_size = RXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
 
-static const struct data_queue_desc rt2500pci_queue_tx = {
-	.entry_num		= 32,
-	.data_size		= DATA_FRAME_SIZE,
-	.desc_size		= TXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_AC_BE:
+	case QID_AC_BK:
+		queue->limit = 32;
+		queue->data_size = DATA_FRAME_SIZE;
+		queue->desc_size = TXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
 
-static const struct data_queue_desc rt2500pci_queue_bcn = {
-	.entry_num		= 1,
-	.data_size		= MGMT_FRAME_SIZE,
-	.desc_size		= TXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+	case QID_BEACON:
+		queue->limit = 1;
+		queue->data_size = MGMT_FRAME_SIZE;
+		queue->desc_size = TXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
 
-static const struct data_queue_desc rt2500pci_queue_atim = {
-	.entry_num		= 8,
-	.data_size		= DATA_FRAME_SIZE,
-	.desc_size		= TXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+	case QID_ATIM:
+		queue->limit = 8;
+		queue->data_size = DATA_FRAME_SIZE;
+		queue->desc_size = TXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
+
+	default:
+		BUG();
+		break;
+	}
+}
 
 static const struct rt2x00_ops rt2500pci_ops = {
 	.name			= KBUILD_MODNAME,
@@ -2091,10 +2103,7 @@ static const struct rt2x00_ops rt2500pci_ops = {
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
 	.extra_tx_headroom	= 0,
-	.rx			= &rt2500pci_queue_rx,
-	.tx			= &rt2500pci_queue_tx,
-	.bcn			= &rt2500pci_queue_bcn,
-	.atim			= &rt2500pci_queue_atim,
+	.queue_init		= rt2500pci_queue_init,
 	.lib			= &rt2500pci_rt2x00_ops,
 	.hw			= &rt2500pci_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-- 
cgit v1.2.3


From 7106d97bc475b2c0f2a134f804b245bf5eaebffc Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 4 Jun 2013 13:40:48 +0200
Subject: rt2x00: rt61pci: implement queue_init callback

The generic rt2x00 code has been changed to allow the
drivers toimplement dynamic data_queue initialization.

Remove the static data queue descriptor structures
and implement the queue_init callback instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Jakub Kicinski <kubakici@wp.pl>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt61pci.c | 54 +++++++++++++++++++++--------------
 1 file changed, 33 insertions(+), 21 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 7e1759b3e49a..17507d12d5ee 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -3025,26 +3025,40 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
 	.config			= rt61pci_config,
 };
 
-static const struct data_queue_desc rt61pci_queue_rx = {
-	.entry_num		= 32,
-	.data_size		= DATA_FRAME_SIZE,
-	.desc_size		= RXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+static void rt61pci_queue_init(struct data_queue *queue)
+{
+	switch (queue->qid) {
+	case QID_RX:
+		queue->limit = 32;
+		queue->data_size = DATA_FRAME_SIZE;
+		queue->desc_size = RXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
 
-static const struct data_queue_desc rt61pci_queue_tx = {
-	.entry_num		= 32,
-	.data_size		= DATA_FRAME_SIZE,
-	.desc_size		= TXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_AC_BE:
+	case QID_AC_BK:
+		queue->limit = 32;
+		queue->data_size = DATA_FRAME_SIZE;
+		queue->desc_size = TXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
 
-static const struct data_queue_desc rt61pci_queue_bcn = {
-	.entry_num		= 4,
-	.data_size		= 0, /* No DMA required for beacons */
-	.desc_size		= TXINFO_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_mmio),
-};
+	case QID_BEACON:
+		queue->limit = 4;
+		queue->data_size = 0; /* No DMA required for beacons */
+		queue->desc_size = TXINFO_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
+		break;
+
+	case QID_ATIM:
+		/* fallthrough */
+	default:
+		BUG();
+		break;
+	}
+}
 
 static const struct rt2x00_ops rt61pci_ops = {
 	.name			= KBUILD_MODNAME,
@@ -3053,9 +3067,7 @@ static const struct rt2x00_ops rt61pci_ops = {
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
 	.extra_tx_headroom	= 0,
-	.rx			= &rt61pci_queue_rx,
-	.tx			= &rt61pci_queue_tx,
-	.bcn			= &rt61pci_queue_bcn,
+	.queue_init		= rt61pci_queue_init,
 	.lib			= &rt61pci_rt2x00_ops,
 	.hw			= &rt61pci_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-- 
cgit v1.2.3


From c29a32c8f15c81470d16aee82f52432eb477aa9b Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 4 Jun 2013 13:40:49 +0200
Subject: rt2x00: rt2500usb: implement queue_init callback

The generic rt2x00 code has been changed to allow the
drivers toimplement dynamic data_queue initialization.

Remove the static data queue descriptor structures
and implement the queue_init callback instead.

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2500usb.c | 65 +++++++++++++++++++--------------
 1 file changed, 37 insertions(+), 28 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index a7f7b365eff4..e5e5479bcf93 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1867,33 +1867,45 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
 	.config			= rt2500usb_config,
 };
 
-static const struct data_queue_desc rt2500usb_queue_rx = {
-	.entry_num		= 32,
-	.data_size		= DATA_FRAME_SIZE,
-	.desc_size		= RXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_usb),
-};
+static void rt2500usb_queue_init(struct data_queue *queue)
+{
+	switch (queue->qid) {
+	case QID_RX:
+		queue->limit = 32;
+		queue->data_size = DATA_FRAME_SIZE;
+		queue->desc_size = RXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_usb);
+		break;
 
-static const struct data_queue_desc rt2500usb_queue_tx = {
-	.entry_num		= 32,
-	.data_size		= DATA_FRAME_SIZE,
-	.desc_size		= TXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_usb),
-};
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_AC_BE:
+	case QID_AC_BK:
+		queue->limit = 32;
+		queue->data_size = DATA_FRAME_SIZE;
+		queue->desc_size = TXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_usb);
+		break;
 
-static const struct data_queue_desc rt2500usb_queue_bcn = {
-	.entry_num		= 1,
-	.data_size		= MGMT_FRAME_SIZE,
-	.desc_size		= TXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_usb_bcn),
-};
+	case QID_BEACON:
+		queue->limit = 1;
+		queue->data_size = MGMT_FRAME_SIZE;
+		queue->desc_size = TXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_usb_bcn);
+		break;
 
-static const struct data_queue_desc rt2500usb_queue_atim = {
-	.entry_num		= 8,
-	.data_size		= DATA_FRAME_SIZE,
-	.desc_size		= TXD_DESC_SIZE,
-	.priv_size		= sizeof(struct queue_entry_priv_usb),
-};
+	case QID_ATIM:
+		queue->limit = 8;
+		queue->data_size = DATA_FRAME_SIZE;
+		queue->desc_size = TXD_DESC_SIZE;
+		queue->priv_size = sizeof(struct queue_entry_priv_usb);
+		break;
+
+	default:
+		BUG();
+		break;
+	}
+}
 
 static const struct rt2x00_ops rt2500usb_ops = {
 	.name			= KBUILD_MODNAME,
@@ -1902,10 +1914,7 @@ static const struct rt2x00_ops rt2500usb_ops = {
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
 	.extra_tx_headroom	= TXD_DESC_SIZE,
-	.rx			= &rt2500usb_queue_rx,
-	.tx			= &rt2500usb_queue_tx,
-	.bcn			= &rt2500usb_queue_bcn,
-	.atim			= &rt2500usb_queue_atim,
+	.queue_init		= rt2500usb_queue_init,
 	.lib			= &rt2500usb_rt2x00_ops,
 	.hw			= &rt2500usb_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-- 
cgit v1.2.3


From 705802bf56b1b7a64e543805ba196a6e1fb80ec6 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 4 Jun 2013 13:40:50 +0200
Subject: rt2x00: remove data_queue_desc struct

If the queue_init callback is implemented
by a driver it gets used instead of the
data_queue_desc based initialization.

The queue_init callback is implemented for
each drivers now, so the old initialization
method is not used anymore. Remove the unused
data_queue_desc structure and all of the
related code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00.h      |  4 ---
 drivers/net/wireless/rt2x00/rt2x00queue.c | 42 +------------------------------
 drivers/net/wireless/rt2x00/rt2x00queue.h | 19 --------------
 3 files changed, 1 insertion(+), 64 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 2d2db6472c04..2a17f7e4ed5e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -649,10 +649,6 @@ struct rt2x00_ops {
 	const unsigned int rf_size;
 	const unsigned int tx_queues;
 	const unsigned int extra_tx_headroom;
-	const struct data_queue_desc *rx;
-	const struct data_queue_desc *tx;
-	const struct data_queue_desc *bcn;
-	const struct data_queue_desc *atim;
 	void (*queue_init)(struct data_queue *queue);
 	const struct rt2x00lib_ops *lib;
 	const void *drv;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 2a99ff1714ac..c4f1e2b8dc8e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -1276,33 +1276,6 @@ void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev)
 	}
 }
 
-static const struct data_queue_desc *
-rt2x00queue_get_qdesc_by_qid(struct rt2x00_dev *rt2x00dev,
-			     enum data_queue_qid qid)
-{
-	switch (qid) {
-	case QID_RX:
-		return rt2x00dev->ops->rx;
-
-	case QID_AC_BE:
-	case QID_AC_BK:
-	case QID_AC_VO:
-	case QID_AC_VI:
-		return rt2x00dev->ops->tx;
-
-	case QID_BEACON:
-		return rt2x00dev->ops->bcn;
-
-	case QID_ATIM:
-		return rt2x00dev->ops->atim;
-
-	default:
-		break;
-	}
-
-	return NULL;
-}
-
 static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev,
 			     struct data_queue *queue, enum data_queue_qid qid)
 {
@@ -1317,20 +1290,7 @@ static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev,
 	queue->cw_min = 5;
 	queue->cw_max = 10;
 
-	if (rt2x00dev->ops->queue_init) {
-		rt2x00dev->ops->queue_init(queue);
-	} else {
-		const struct data_queue_desc *qdesc;
-
-		qdesc = rt2x00queue_get_qdesc_by_qid(rt2x00dev, qid);
-		BUG_ON(!qdesc);
-
-		queue->limit = qdesc->entry_num;
-		queue->data_size = qdesc->data_size;
-		queue->desc_size = qdesc->desc_size;
-		queue->winfo_size = qdesc->winfo_size;
-		queue->priv_size = qdesc->priv_size;
-	}
+	rt2x00dev->ops->queue_init(queue);
 
 	queue->threshold = DIV_ROUND_UP(queue->limit, 10);
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 2cf4903ce112..ebe117224979 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -488,25 +488,6 @@ struct data_queue {
 	unsigned short usb_maxpacket;
 };
 
-/**
- * struct data_queue_desc: Data queue description
- *
- * The information in this structure is used by drivers
- * to inform rt2x00lib about the creation of the data queue.
- *
- * @entry_num: Maximum number of entries for a queue.
- * @data_size: Maximum data size for the frames in this queue.
- * @desc_size: Hardware descriptor size for the data in this queue.
- * @priv_size: Size of per-queue_entry private data.
- */
-struct data_queue_desc {
-	unsigned short entry_num;
-	unsigned short data_size;
-	unsigned char  desc_size;
-	unsigned char  winfo_size;
-	unsigned short priv_size;
-};
-
 /**
  * queue_end - Return pointer to the last queue (HELPER MACRO).
  * @__dev: Pointer to &struct rt2x00_dev
-- 
cgit v1.2.3


From df8100836e05b457af7b1627c601afe82e1d3ebe Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue, 4 Jun 2013 16:19:56 -0700
Subject: mwifiex: fix regression issue for usb interface

PATCH "mwifiex: scan delay timer cleanup in unload path" adds code
to cancel scan delay timer in unload path. It causes a regression
for USB interface.

USB8797 card gets enumerated twice. First enumeration is for
firmware download and second enumeration expects firmware
initialization.

It was observed that we are trying del_timer_sync() without setting
up the timer when remove handler is called after first enumeration.

This patch moves setup_timer() call to appropriate place so that
timer is setup for both the enumerations.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/init.c | 81 ------------------------------------
 drivers/net/wireless/mwifiex/main.c | 82 +++++++++++++++++++++++++++++++++++++
 2 files changed, 82 insertions(+), 81 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index c7f11c0c3bb7..2fe31dcaa6ef 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -52,84 +52,6 @@ static int mwifiex_add_bss_prio_tbl(struct mwifiex_private *priv)
 	return 0;
 }
 
-static void scan_delay_timer_fn(unsigned long data)
-{
-	struct mwifiex_private *priv = (struct mwifiex_private *)data;
-	struct mwifiex_adapter *adapter = priv->adapter;
-	struct cmd_ctrl_node *cmd_node, *tmp_node;
-	unsigned long flags;
-
-	if (adapter->surprise_removed)
-		return;
-
-	if (adapter->scan_delay_cnt == MWIFIEX_MAX_SCAN_DELAY_CNT) {
-		/*
-		 * Abort scan operation by cancelling all pending scan
-		 * commands
-		 */
-		spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
-		list_for_each_entry_safe(cmd_node, tmp_node,
-					 &adapter->scan_pending_q, list) {
-			list_del(&cmd_node->list);
-			mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
-		}
-		spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
-
-		spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
-		adapter->scan_processing = false;
-		adapter->scan_delay_cnt = 0;
-		adapter->empty_tx_q_cnt = 0;
-		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
-
-		if (priv->scan_request) {
-			dev_dbg(adapter->dev, "info: aborting scan\n");
-			cfg80211_scan_done(priv->scan_request, 1);
-			priv->scan_request = NULL;
-		} else {
-			priv->scan_aborting = false;
-			dev_dbg(adapter->dev, "info: scan already aborted\n");
-		}
-		goto done;
-	}
-
-	if (!atomic_read(&priv->adapter->is_tx_received)) {
-		adapter->empty_tx_q_cnt++;
-		if (adapter->empty_tx_q_cnt == MWIFIEX_MAX_EMPTY_TX_Q_CNT) {
-			/*
-			 * No Tx traffic for 200msec. Get scan command from
-			 * scan pending queue and put to cmd pending queue to
-			 * resume scan operation
-			 */
-			adapter->scan_delay_cnt = 0;
-			adapter->empty_tx_q_cnt = 0;
-			spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
-			cmd_node = list_first_entry(&adapter->scan_pending_q,
-						    struct cmd_ctrl_node, list);
-			list_del(&cmd_node->list);
-			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
-					       flags);
-
-			mwifiex_insert_cmd_to_pending_q(adapter, cmd_node,
-							true);
-			queue_work(adapter->workqueue, &adapter->main_work);
-			goto done;
-		}
-	} else {
-		adapter->empty_tx_q_cnt = 0;
-	}
-
-	/* Delay scan operation further by 20msec */
-	mod_timer(&priv->scan_delay_timer, jiffies +
-		  msecs_to_jiffies(MWIFIEX_SCAN_DELAY_MSEC));
-	adapter->scan_delay_cnt++;
-
-done:
-	if (atomic_read(&priv->adapter->is_tx_received))
-		atomic_set(&priv->adapter->is_tx_received, false);
-
-	return;
-}
-
 /*
  * This function initializes the private structure and sets default
  * values to the members.
@@ -211,9 +133,6 @@ int mwifiex_init_priv(struct mwifiex_private *priv)
 
 	priv->scan_block = false;
 
-	setup_timer(&priv->scan_delay_timer, scan_delay_timer_fn,
-		    (unsigned long)priv);
-
 	return mwifiex_add_bss_prio_tbl(priv);
 }
 
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 5bc7ef8d04d6..485871940d3c 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -28,6 +28,84 @@ const char driver_version[] = "mwifiex " VERSION " (%s) ";
 static char *cal_data_cfg;
 module_param(cal_data_cfg, charp, 0);
 
+static void scan_delay_timer_fn(unsigned long data)
+{
+	struct mwifiex_private *priv = (struct mwifiex_private *)data;
+	struct mwifiex_adapter *adapter = priv->adapter;
+	struct cmd_ctrl_node *cmd_node, *tmp_node;
+	unsigned long flags;
+
+	if (adapter->surprise_removed)
+		return;
+
+	if (adapter->scan_delay_cnt == MWIFIEX_MAX_SCAN_DELAY_CNT) {
+		/*
+		 * Abort scan operation by cancelling all pending scan
+		 * commands
+		 */
+		spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
+		list_for_each_entry_safe(cmd_node, tmp_node,
+					 &adapter->scan_pending_q, list) {
+			list_del(&cmd_node->list);
+			mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
+		}
+		spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
+
+		spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+		adapter->scan_processing = false;
+		adapter->scan_delay_cnt = 0;
+		adapter->empty_tx_q_cnt = 0;
+		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+
+		if (priv->scan_request) {
+			dev_dbg(adapter->dev, "info: aborting scan\n");
+			cfg80211_scan_done(priv->scan_request, 1);
+			priv->scan_request = NULL;
+		} else {
+			priv->scan_aborting = false;
+			dev_dbg(adapter->dev, "info: scan already aborted\n");
+		}
+		goto done;
+	}
+
+	if (!atomic_read(&priv->adapter->is_tx_received)) {
+		adapter->empty_tx_q_cnt++;
+		if (adapter->empty_tx_q_cnt == MWIFIEX_MAX_EMPTY_TX_Q_CNT) {
+			/*
+			 * No Tx traffic for 200msec. Get scan command from
+			 * scan pending queue and put to cmd pending queue to
+			 * resume scan operation
+			 */
+			adapter->scan_delay_cnt = 0;
+			adapter->empty_tx_q_cnt = 0;
+			spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
+			cmd_node = list_first_entry(&adapter->scan_pending_q,
+						    struct cmd_ctrl_node, list);
+			list_del(&cmd_node->list);
+			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
+					       flags);
+
+			mwifiex_insert_cmd_to_pending_q(adapter, cmd_node,
+							true);
+			queue_work(adapter->workqueue, &adapter->main_work);
+			goto done;
+		}
+	} else {
+		adapter->empty_tx_q_cnt = 0;
+	}
+
+	/* Delay scan operation further by 20msec */
+	mod_timer(&priv->scan_delay_timer, jiffies +
+		  msecs_to_jiffies(MWIFIEX_SCAN_DELAY_MSEC));
+	adapter->scan_delay_cnt++;
+
+done:
+	if (atomic_read(&priv->adapter->is_tx_received))
+		atomic_set(&priv->adapter->is_tx_received, false);
+
+	return;
+}
+
 /*
  * This function registers the device and performs all the necessary
  * initializations.
@@ -75,6 +153,10 @@ static int mwifiex_register(void *card, struct mwifiex_if_ops *if_ops,
 
 		adapter->priv[i]->adapter = adapter;
 		adapter->priv_num++;
+
+		setup_timer(&adapter->priv[i]->scan_delay_timer,
+			    scan_delay_timer_fn,
+			    (unsigned long)adapter->priv[i]);
 	}
 	mwifiex_init_lock_list(adapter);
 
-- 
cgit v1.2.3


From c9e2404c9ffcbb31b0bd1348be5fc7a4de6f90d6 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Tue, 4 Jun 2013 16:20:38 -0700
Subject: mwifiex: enable/disable tx_amsdu support via module parameter

This patch disables tx_amsdu support in mwifiex by default.
tx_amdsu support can be enabled via module parameter at load time.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/wmm.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index 4be3d33ceae8..944e8846f6fc 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -37,6 +37,9 @@
 /* Offset for TOS field in the IP header */
 #define IPTOS_OFFSET 5
 
+static bool enable_tx_amsdu;
+module_param(enable_tx_amsdu, bool, 0644);
+
 /* WMM information IE */
 static const u8 wmm_info_ie[] = { WLAN_EID_VENDOR_SPECIFIC, 0x07,
 	0x00, 0x50, 0xf2, 0x02,
@@ -1233,7 +1236,7 @@ mwifiex_dequeue_tx_packet(struct mwifiex_adapter *adapter)
 				mwifiex_send_delba(priv, tid_del, ra, 1);
 			}
 		}
-		if (mwifiex_is_amsdu_allowed(priv, tid) &&
+		if (enable_tx_amsdu && mwifiex_is_amsdu_allowed(priv, tid) &&
 		    mwifiex_is_11n_aggragation_possible(priv, ptr,
 							adapter->tx_buf_size))
 			mwifiex_11n_aggregate_pkt(priv, ptr, INTF_HEADER_LEN,
-- 
cgit v1.2.3


From ca3ae51396c049fcb9a93ded6f90ec81f7360ffa Mon Sep 17 00:00:00 2001
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Date: Wed, 5 Jun 2013 10:16:33 +0800
Subject: iwlegacy: fix error return code in il3945_pci_probe()

Fix to return a negative error code in the il3945_hw_set_hw_params() error
handling case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/3945-mac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c
index b37a582ccbe7..866ce6c68405 100644
--- a/drivers/net/wireless/iwlegacy/3945-mac.c
+++ b/drivers/net/wireless/iwlegacy/3945-mac.c
@@ -3727,7 +3727,8 @@ il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * 5. Setup HW Constants
 	 * ********************/
 	/* Device-specific setup */
-	if (il3945_hw_set_hw_params(il)) {
+	err = il3945_hw_set_hw_params(il);
+	if (err) {
 		IL_ERR("failed to set hw settings\n");
 		goto out_eeprom_free;
 	}
-- 
cgit v1.2.3


From d619c62f161a43db1f40e5039ff1285dd29b8658 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
Date: Wed, 5 Jun 2013 20:45:36 -0700
Subject: ath: add VHT80 support for regulatory domains

This adds VHT80 support for the QCA world regulatory
domains.

Cc: kvalo@qca.qualcomm.com
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/regd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index ccc4c718f124..7d077c752dd5 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -42,11 +42,11 @@ static int __ath_regd_init(struct ath_regulatory *reg);
 				NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_OFDM)
 
 /* We allow IBSS on these on a case by case basis by regulatory domain */
-#define ATH9K_5GHZ_5150_5350	REG_RULE(5150-10, 5350+10, 40, 0, 30,\
+#define ATH9K_5GHZ_5150_5350	REG_RULE(5150-10, 5350+10, 80, 0, 30,\
 				NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
-#define ATH9K_5GHZ_5470_5850	REG_RULE(5470-10, 5850+10, 40, 0, 30,\
+#define ATH9K_5GHZ_5470_5850	REG_RULE(5470-10, 5850+10, 80, 0, 30,\
 				NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
-#define ATH9K_5GHZ_5725_5850	REG_RULE(5725-10, 5850+10, 40, 0, 30,\
+#define ATH9K_5GHZ_5725_5850	REG_RULE(5725-10, 5850+10, 80, 0, 30,\
 				NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
 
 #define ATH9K_2GHZ_ALL		ATH9K_2GHZ_CH01_11, \
-- 
cgit v1.2.3


From 5616a6efb2a255330319f9f09f3bcf0fc4680b5f Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Thu, 6 Jun 2013 09:36:19 +0200
Subject: rt2x00: move extra_tx_headroom field from rt2x00_ops to rt2x00_dev

The extra_tx_headroom field of struct rt2x00_ops
indicates the extra TX headroom size required for
a given device. This data is redundant, the value
can be computed from the desc_size and winfo_size
fields of the TX queues.

Move the extra_tx_headroom field to struct rt2x00_dev,
compute its value in the probe routine and use the
cached value in the rest of the code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2400pci.c   |  1 -
 drivers/net/wireless/rt2x00/rt2500pci.c   |  1 -
 drivers/net/wireless/rt2x00/rt2500usb.c   |  1 -
 drivers/net/wireless/rt2x00/rt2800pci.c   |  1 -
 drivers/net/wireless/rt2x00/rt2800usb.c   |  2 --
 drivers/net/wireless/rt2x00/rt2x00.h      |  4 +++-
 drivers/net/wireless/rt2x00/rt2x00dev.c   | 18 ++++++++++++++++--
 drivers/net/wireless/rt2x00/rt2x00queue.c |  6 +++---
 drivers/net/wireless/rt2x00/rt61pci.c     |  1 -
 drivers/net/wireless/rt2x00/rt73usb.c     |  1 -
 10 files changed, 22 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index e1ec9a4517d1..3d53a09da5a1 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1813,7 +1813,6 @@ static const struct rt2x00_ops rt2400pci_ops = {
 	.eeprom_size		= EEPROM_SIZE,
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
-	.extra_tx_headroom	= 0,
 	.queue_init		= rt2400pci_queue_init,
 	.lib			= &rt2400pci_rt2x00_ops,
 	.hw			= &rt2400pci_mac80211_ops,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index a1670e8967ed..0ac5c589ddce 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -2102,7 +2102,6 @@ static const struct rt2x00_ops rt2500pci_ops = {
 	.eeprom_size		= EEPROM_SIZE,
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
-	.extra_tx_headroom	= 0,
 	.queue_init		= rt2500pci_queue_init,
 	.lib			= &rt2500pci_rt2x00_ops,
 	.hw			= &rt2500pci_mac80211_ops,
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index e5e5479bcf93..85acc79f68b8 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1913,7 +1913,6 @@ static const struct rt2x00_ops rt2500usb_ops = {
 	.eeprom_size		= EEPROM_SIZE,
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
-	.extra_tx_headroom	= TXD_DESC_SIZE,
 	.queue_init		= rt2500usb_queue_init,
 	.lib			= &rt2500usb_rt2x00_ops,
 	.hw			= &rt2500usb_mac80211_ops,
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 260c8b4d7399..7c7478219bbc 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1231,7 +1231,6 @@ static const struct rt2x00_ops rt2800pci_ops = {
 	.eeprom_size		= EEPROM_SIZE,
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
-	.extra_tx_headroom	= TXWI_DESC_SIZE,
 	.queue_init		= rt2800pci_queue_init,
 	.lib			= &rt2800pci_rt2x00_ops,
 	.drv			= &rt2800pci_rt2800_ops,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index b81d5098816a..68ea00e169d2 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -905,7 +905,6 @@ static const struct rt2x00_ops rt2800usb_ops = {
 	.eeprom_size		= EEPROM_SIZE,
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
-	.extra_tx_headroom	= TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
 	.queue_init		= rt2800usb_queue_init,
 	.lib			= &rt2800usb_rt2x00_ops,
 	.drv			= &rt2800usb_rt2800_ops,
@@ -922,7 +921,6 @@ static const struct rt2x00_ops rt2800usb_ops_5592 = {
 	.eeprom_size		= EEPROM_SIZE,
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
-	.extra_tx_headroom	= TXINFO_DESC_SIZE + TXWI_DESC_SIZE_5592,
 	.queue_init		= rt2800usb_queue_init,
 	.lib			= &rt2800usb_rt2x00_ops,
 	.drv			= &rt2800usb_rt2800_ops,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 2a17f7e4ed5e..ee3fc570b11d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -648,7 +648,6 @@ struct rt2x00_ops {
 	const unsigned int eeprom_size;
 	const unsigned int rf_size;
 	const unsigned int tx_queues;
-	const unsigned int extra_tx_headroom;
 	void (*queue_init)(struct data_queue *queue);
 	const struct rt2x00lib_ops *lib;
 	const void *drv;
@@ -1007,6 +1006,9 @@ struct rt2x00_dev {
 	 */
 	struct list_head bar_list;
 	spinlock_t bar_list_lock;
+
+	/* Extra TX headroom required for alignment purposes. */
+	unsigned int extra_tx_headroom;
 };
 
 struct rt2x00_bar_list_entry {
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index dff5012f0548..f03e3bba51c3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -334,7 +334,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	/*
 	 * Remove the extra tx headroom from the skb.
 	 */
-	skb_pull(entry->skb, rt2x00dev->ops->extra_tx_headroom);
+	skb_pull(entry->skb, rt2x00dev->extra_tx_headroom);
 
 	/*
 	 * Signal that the TX descriptor is no longer in the skb.
@@ -1049,7 +1049,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00dev->hw->extra_tx_headroom =
 		max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM,
-		      rt2x00dev->ops->extra_tx_headroom);
+		      rt2x00dev->extra_tx_headroom);
 
 	/*
 	 * Take TX headroom required for alignment into account.
@@ -1256,6 +1256,17 @@ static inline void rt2x00lib_set_if_combinations(struct rt2x00_dev *rt2x00dev)
 	rt2x00dev->hw->wiphy->n_iface_combinations = 1;
 }
 
+static unsigned int rt2x00dev_extra_tx_headroom(struct rt2x00_dev *rt2x00dev)
+{
+	if (WARN_ON(!rt2x00dev->tx))
+		return 0;
+
+	if (rt2x00_is_usb(rt2x00dev))
+		return rt2x00dev->tx[0].winfo_size + rt2x00dev->tx[0].desc_size;
+
+	return rt2x00dev->tx[0].winfo_size;
+}
+
 /*
  * driver allocation handlers.
  */
@@ -1330,6 +1341,9 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 	if (retval)
 		goto exit;
 
+	/* Cache TX headroom value */
+	rt2x00dev->extra_tx_headroom = rt2x00dev_extra_tx_headroom(rt2x00dev);
+
 	/*
 	 * Determine which operating modes are supported, all modes
 	 * which require beaconing, depend on the availability of
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index c4f1e2b8dc8e..6c0a91ff963c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -542,8 +542,8 @@ static int rt2x00queue_write_tx_data(struct queue_entry *entry,
 	/*
 	 * Add the requested extra tx headroom in front of the skb.
 	 */
-	skb_push(entry->skb, rt2x00dev->ops->extra_tx_headroom);
-	memset(entry->skb->data, 0, rt2x00dev->ops->extra_tx_headroom);
+	skb_push(entry->skb, rt2x00dev->extra_tx_headroom);
+	memset(entry->skb->data, 0, rt2x00dev->extra_tx_headroom);
 
 	/*
 	 * Call the driver's write_tx_data function, if it exists.
@@ -596,7 +596,7 @@ static void rt2x00queue_bar_check(struct queue_entry *entry)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_bar *bar = (void *) (entry->skb->data +
-				    rt2x00dev->ops->extra_tx_headroom);
+				    rt2x00dev->extra_tx_headroom);
 	struct rt2x00_bar_list_entry *bar_entry;
 
 	if (likely(!ieee80211_is_back_req(bar->frame_control)))
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 17507d12d5ee..53754bc66d05 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -3066,7 +3066,6 @@ static const struct rt2x00_ops rt61pci_ops = {
 	.eeprom_size		= EEPROM_SIZE,
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
-	.extra_tx_headroom	= 0,
 	.queue_init		= rt61pci_queue_init,
 	.lib			= &rt61pci_rt2x00_ops,
 	.hw			= &rt61pci_mac80211_ops,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index b2e346a482cc..1616ed484ceb 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2400,7 +2400,6 @@ static const struct rt2x00_ops rt73usb_ops = {
 	.eeprom_size		= EEPROM_SIZE,
 	.rf_size		= RF_SIZE,
 	.tx_queues		= NUM_TX_QUEUES,
-	.extra_tx_headroom	= TXD_DESC_SIZE,
 	.queue_init		= rt73usb_queue_init,
 	.lib			= &rt73usb_rt2x00_ops,
 	.hw			= &rt73usb_mac80211_ops,
-- 
cgit v1.2.3


From 7ce0bad5c4586e4e9fb9d3e90d89101cd06fb999 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Thu, 6 Jun 2013 09:36:20 +0200
Subject: rt2x00: rt2800usb: nuke rt2800usb_ops_5592

It is exactly the same like the generic rt2800usb_ops.
Remove the duplicate and use the generic ops for all
devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800usb.c | 29 +++++------------------------
 1 file changed, 5 insertions(+), 24 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 68ea00e169d2..7edd903dd749 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -914,22 +914,6 @@ static const struct rt2x00_ops rt2800usb_ops = {
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 };
 
-static const struct rt2x00_ops rt2800usb_ops_5592 = {
-	.name			= KBUILD_MODNAME,
-	.drv_data_size		= sizeof(struct rt2800_drv_data),
-	.max_ap_intf		= 8,
-	.eeprom_size		= EEPROM_SIZE,
-	.rf_size		= RF_SIZE,
-	.tx_queues		= NUM_TX_QUEUES,
-	.queue_init		= rt2800usb_queue_init,
-	.lib			= &rt2800usb_rt2x00_ops,
-	.drv			= &rt2800usb_rt2800_ops,
-	.hw			= &rt2800usb_mac80211_ops,
-#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-	.debugfs		= &rt2800_rt2x00debug,
-#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-};
-
 /*
  * rt2800usb module information.
  */
@@ -1242,15 +1226,15 @@ static struct usb_device_id rt2800usb_device_table[] = {
 #endif
 #ifdef CONFIG_RT2800USB_RT55XX
 	/* Arcadyan */
-	{ USB_DEVICE(0x043e, 0x7a32), .driver_info = 5592 },
+	{ USB_DEVICE(0x043e, 0x7a32) },
 	/* AVM GmbH */
-	{ USB_DEVICE(0x057c, 0x8501), .driver_info = 5592 },
+	{ USB_DEVICE(0x057c, 0x8501) },
 	/* D-Link DWA-160-B2 */
-	{ USB_DEVICE(0x2001, 0x3c1a), .driver_info = 5592 },
+	{ USB_DEVICE(0x2001, 0x3c1a) },
 	/* Proware */
-	{ USB_DEVICE(0x043e, 0x7a13), .driver_info = 5592 },
+	{ USB_DEVICE(0x043e, 0x7a13) },
 	/* Ralink */
-	{ USB_DEVICE(0x148f, 0x5572), .driver_info = 5592 },
+	{ USB_DEVICE(0x148f, 0x5572) },
 #endif
 #ifdef CONFIG_RT2800USB_UNKNOWN
 	/*
@@ -1355,9 +1339,6 @@ MODULE_LICENSE("GPL");
 static int rt2800usb_probe(struct usb_interface *usb_intf,
 			   const struct usb_device_id *id)
 {
-	if (id->driver_info == 5592)
-		return rt2x00usb_probe(usb_intf, &rt2800usb_ops_5592);
-
 	return rt2x00usb_probe(usb_intf, &rt2800usb_ops);
 }
 
-- 
cgit v1.2.3


From f55d94a600ab5db0df4eccbc15d889ae104d058e Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 6 Jun 2013 13:17:46 +0200
Subject: brcmfmac: allow firmware-signal tlv to be longer than specified

The firmware-signal API specification defines length for the different
tlv. During testing on different devices it turned out not all firmware
used the tlv length according specification. Therefore the length check
is made less strict with this patch.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index 5352dc1fdf3c..d6f05ae85de3 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -1433,7 +1433,7 @@ int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len,
 		if (data_len < len + 2)
 			break;
 
-		if (len != brcmf_fws_get_tlv_len(fws, type))
+		if (len < brcmf_fws_get_tlv_len(fws, type))
 			break;
 
 		err = BRCMF_FWS_RET_OK_NOSCHEDULE;
-- 
cgit v1.2.3


From 51f6dd9da27359d9218046ed0003f71e05a673c1 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 6 Jun 2013 13:17:47 +0200
Subject: brcmfmac: remove fifo bitfield from brcmf_skbuff_cb::if_flags

The brcmf_skbuff_cb structure contain if_flags and htod fields. Both
have a bitfield defined to hold the fifo number. With a small code
change we get rid of the fifo bitfield in if_flags.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index d6f05ae85de3..bc2edc04e525 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -195,7 +195,6 @@ struct brcmf_skbuff_cb {
  *	b[9]   - packet is a tx packet.
  *	b[8]   - packet uses FIFO credit (non-pspoll).
  *	b[7]   - interface in AP mode.
- *	b[6:4] - AC FIFO number.
  *	b[3:0] - interface index.
  */
 #define BRCMF_SKB_IF_FLAGS_REQUESTED_MASK	0x0800
@@ -208,8 +207,6 @@ struct brcmf_skbuff_cb {
 #define BRCMF_SKB_IF_FLAGS_CREDITCHECK_SHIFT	8
 #define BRCMF_SKB_IF_FLAGS_IF_AP_MASK		0x0080
 #define BRCMF_SKB_IF_FLAGS_IF_AP_SHIFT		7
-#define BRCMF_SKB_IF_FLAGS_FIFO_MASK		0x0070
-#define BRCMF_SKB_IF_FLAGS_FIFO_SHIFT		4
 #define BRCMF_SKB_IF_FLAGS_INDEX_MASK		0x000f
 #define BRCMF_SKB_IF_FLAGS_INDEX_SHIFT		0
 
@@ -1608,7 +1605,8 @@ static int brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
 }
 
 static void
-brcmf_fws_rollback_toq(struct brcmf_fws_info *fws, struct sk_buff *skb)
+brcmf_fws_rollback_toq(struct brcmf_fws_info *fws,
+		       struct sk_buff *skb, int fifo)
 {
 	/*
 	put the packet back to the head of queue
@@ -1622,11 +1620,9 @@ brcmf_fws_rollback_toq(struct brcmf_fws_info *fws, struct sk_buff *skb)
 	enum brcmf_fws_skb_state state;
 	struct sk_buff *pktout;
 	int rc = 0;
-	int fifo;
 	int hslot;
 	u8 ifidx;
 
-	fifo = brcmf_skb_if_flags_get_field(skb, FIFO);
 	state = brcmf_skbcb(skb)->state;
 	entry = brcmf_skbcb(skb)->mac;
 
@@ -1794,7 +1790,7 @@ static int brcmf_fws_commit_skb(struct brcmf_fws_info *fws, int fifo,
 	return rc;
 
 rollback:
-	brcmf_fws_rollback_toq(fws, skb);
+	brcmf_fws_rollback_toq(fws, skb, fifo);
 	return rc;
 }
 
@@ -1831,7 +1827,6 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 	brcmf_skb_if_flags_set_field(skb, INDEX, ifp->ifidx);
 	if (!multicast)
 		fifo = brcmf_fws_prio2fifo[skb->priority];
-	brcmf_skb_if_flags_set_field(skb, FIFO, fifo);
 
 	brcmf_dbg(TRACE, "ea=%pM, multi=%d, fifo=%d\n", eh->h_dest,
 		  multicast, fifo);
-- 
cgit v1.2.3


From df50f756966cc07addaae5449a6fd45a17bdb06c Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Thu, 6 Jun 2013 13:17:48 +0200
Subject: brcmfmac: Take bus flowcontrol at credit mgmt into account.

On bus flow control (no more host bus resources to send packets
to device) the netif flow control was toggled, however credit
management should also take this status into account. Since there
are multiple sources handling this flow control necessary spinlocks
were added to protect flow control related data/states.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd.h       |  2 ++
 drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c |  8 ++++++++
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c  |  2 +-
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c  | 21 +++++++++++++++++++--
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h  |  1 +
 drivers/net/wireless/brcm80211/brcmfmac/usb.c       |  8 ++++++++
 6 files changed, 39 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h
index 28db9cf39672..86cbfe2c7c6c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h
@@ -583,6 +583,7 @@ enum brcmf_netif_stop_reason {
  * @bssidx: index of bss associated with this interface.
  * @mac_addr: assigned mac address.
  * @netif_stop: bitmap indicates reason why netif queues are stopped.
+ * @netif_stop_lock: spinlock for update netif_stop from multiple sources.
  * @pend_8021x_cnt: tracks outstanding number of 802.1x frames.
  * @pend_8021x_wait: used for signalling change in count.
  */
@@ -598,6 +599,7 @@ struct brcmf_if {
 	s32 bssidx;
 	u8 mac_addr[ETH_ALEN];
 	u8 netif_stop;
+	spinlock_t netif_stop_lock;
 	atomic_t pend_8021x_cnt;
 	wait_queue_head_t pend_8021x_wait;
 };
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index b98f2235978e..df37645f493e 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -240,11 +240,15 @@ done:
 void brcmf_txflowblock_if(struct brcmf_if *ifp,
 			  enum brcmf_netif_stop_reason reason, bool state)
 {
+	unsigned long flags;
+
 	if (!ifp)
 		return;
 
 	brcmf_dbg(TRACE, "enter: idx=%d stop=0x%X reason=%d state=%d\n",
 		  ifp->bssidx, ifp->netif_stop, reason, state);
+
+	spin_lock_irqsave(&ifp->netif_stop_lock, flags);
 	if (state) {
 		if (!ifp->netif_stop)
 			netif_stop_queue(ifp->ndev);
@@ -254,6 +258,7 @@ void brcmf_txflowblock_if(struct brcmf_if *ifp,
 		if (!ifp->netif_stop)
 			netif_wake_queue(ifp->ndev);
 	}
+	spin_unlock_irqrestore(&ifp->netif_stop_lock, flags);
 }
 
 void brcmf_txflowblock(struct device *dev, bool state)
@@ -264,6 +269,8 @@ void brcmf_txflowblock(struct device *dev, bool state)
 
 	brcmf_dbg(TRACE, "Enter\n");
 
+	brcmf_fws_bus_blocked(drvr, state);
+
 	for (i = 0; i < BRCMF_MAX_IFS; i++)
 		brcmf_txflowblock_if(drvr->iflist[i],
 				     BRCMF_NETIF_STOP_REASON_BLOCK_BUS, state);
@@ -779,6 +786,7 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
 	ifp->bssidx = bssidx;
 
 	init_waitqueue_head(&ifp->pend_8021x_wait);
+	spin_lock_init(&ifp->netif_stop_lock);
 
 	if (mac_addr != NULL)
 		memcpy(ifp->mac_addr, mac_addr, ETH_ALEN);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index d2487518bd2a..6f3d181659ef 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -2369,12 +2369,12 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
 	} else {
 		ret = 0;
 	}
-	spin_unlock_bh(&bus->txqlock);
 
 	if (pktq_len(&bus->txq) >= TXHI) {
 		bus->txoff = true;
 		brcmf_txflowblock(bus->sdiodev->dev, true);
 	}
+	spin_unlock_bh(&bus->txqlock);
 
 #ifdef DEBUG
 	if (pktq_plen(&bus->txq, prec) > qcount[prec])
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index bc2edc04e525..c1930ef5c55f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -431,6 +431,7 @@ struct brcmf_fws_info {
 	u32 fifo_credit_map;
 	u32 fifo_delay_map;
 	unsigned long borrow_defer_timestamp;
+	bool bus_flow_blocked;
 };
 
 /*
@@ -1833,6 +1834,7 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 
 	brcmf_fws_lock(drvr, flags);
 	if (skcb->mac->suppressed ||
+	    fws->bus_flow_blocked ||
 	    brcmf_fws_mac_desc_closed(fws, skcb->mac, fifo) ||
 	    brcmu_pktq_mlen(&skcb->mac->psq, 3 << (fifo * 2)) ||
 	    (!multicast &&
@@ -1905,7 +1907,8 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker)
 
 	brcmf_dbg(TRACE, "enter: fws=%p\n", fws);
 	brcmf_fws_lock(fws->drvr, flags);
-	for (fifo = NL80211_NUM_ACS; fifo >= 0; fifo--) {
+	for (fifo = NL80211_NUM_ACS; fifo >= 0 && !fws->bus_flow_blocked;
+	     fifo--) {
 		brcmf_dbg(TRACE, "fifo %d credit %d\n", fifo,
 			  fws->fifo_credit[fifo]);
 		for (credit = 0; credit < fws->fifo_credit[fifo]; /* nop */) {
@@ -1915,9 +1918,12 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker)
 			if (brcmf_skbcb(skb)->if_flags &
 			    BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK)
 				credit++;
+			if (fws->bus_flow_blocked)
+				break;
 		}
 		if ((fifo == BRCMF_FWS_FIFO_AC_BE) &&
-		    (credit == fws->fifo_credit[fifo])) {
+		    (credit == fws->fifo_credit[fifo]) &&
+		    (!fws->bus_flow_blocked)) {
 			fws->fifo_credit[fifo] -= credit;
 			while (brcmf_fws_borrow_credit(fws) == 0) {
 				skb = brcmf_fws_deq(fws, fifo);
@@ -1929,6 +1935,8 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker)
 					brcmf_fws_return_credits(fws, fifo, 1);
 					break;
 				}
+				if (fws->bus_flow_blocked)
+					break;
 			}
 		} else {
 			fws->fifo_credit[fifo] -= credit;
@@ -2060,3 +2068,12 @@ void brcmf_fws_bustxfail(struct brcmf_fws_info *fws, struct sk_buff *skb)
 	}
 	brcmf_fws_unlock(fws->drvr, flags);
 }
+
+void brcmf_fws_bus_blocked(struct brcmf_pub *drvr, bool flow_blocked)
+{
+	struct brcmf_fws_info *fws = drvr->fws;
+
+	fws->bus_flow_blocked = flow_blocked;
+	if (!flow_blocked)
+		brcmf_fws_schedule_deq(fws);
+}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h
index fbe483d23752..9fc860910bd8 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h
@@ -29,5 +29,6 @@ void brcmf_fws_reset_interface(struct brcmf_if *ifp);
 void brcmf_fws_add_interface(struct brcmf_if *ifp);
 void brcmf_fws_del_interface(struct brcmf_if *ifp);
 void brcmf_fws_bustxfail(struct brcmf_fws_info *fws, struct sk_buff *skb);
+void brcmf_fws_bus_blocked(struct brcmf_pub *drvr, bool flow_blocked);
 
 #endif /* FWSIGNAL_H_ */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 01aed7ad6bec..322cadc51ded 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -82,6 +82,7 @@ struct brcmf_usbdev_info {
 	int tx_high_watermark;
 	int tx_freecount;
 	bool tx_flowblock;
+	spinlock_t tx_flowblock_lock;
 
 	struct brcmf_usbreq *tx_reqs;
 	struct brcmf_usbreq *rx_reqs;
@@ -411,6 +412,7 @@ static void brcmf_usb_tx_complete(struct urb *urb)
 {
 	struct brcmf_usbreq *req = (struct brcmf_usbreq *)urb->context;
 	struct brcmf_usbdev_info *devinfo = req->devinfo;
+	unsigned long flags;
 
 	brcmf_dbg(USB, "Enter, urb->status=%d, skb=%p\n", urb->status,
 		  req->skb);
@@ -419,11 +421,13 @@ static void brcmf_usb_tx_complete(struct urb *urb)
 	brcmf_txcomplete(devinfo->dev, req->skb, urb->status == 0);
 	req->skb = NULL;
 	brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req, &devinfo->tx_freecount);
+	spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
 	if (devinfo->tx_freecount > devinfo->tx_high_watermark &&
 		devinfo->tx_flowblock) {
 		brcmf_txflowblock(devinfo->dev, false);
 		devinfo->tx_flowblock = false;
 	}
+	spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags);
 }
 
 static void brcmf_usb_rx_complete(struct urb *urb)
@@ -568,6 +572,7 @@ static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
 	struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 	struct brcmf_usbreq  *req;
 	int ret;
+	unsigned long flags;
 
 	brcmf_dbg(USB, "Enter, skb=%p\n", skb);
 	if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) {
@@ -599,11 +604,13 @@ static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
 		goto fail;
 	}
 
+	spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
 	if (devinfo->tx_freecount < devinfo->tx_low_watermark &&
 	    !devinfo->tx_flowblock) {
 		brcmf_txflowblock(dev, true);
 		devinfo->tx_flowblock = true;
 	}
+	spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags);
 	return 0;
 
 fail:
@@ -1164,6 +1171,7 @@ struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo,
 
 	/* Initialize the spinlocks */
 	spin_lock_init(&devinfo->qlock);
+	spin_lock_init(&devinfo->tx_flowblock_lock);
 
 	INIT_LIST_HEAD(&devinfo->rx_freeq);
 	INIT_LIST_HEAD(&devinfo->rx_postq);
-- 
cgit v1.2.3


From fe353b24c385f219aca1e19767119017618deca7 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 6 Jun 2013 13:17:49 +0200
Subject: brcmfmac: rework credit pickup to assure consistent handling

Reworked brcmf_skb_pick_up_credit() so it can be used for both
fcmode flavours in the same way.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 30 ++++++++++------------
 1 file changed, 13 insertions(+), 17 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index c1930ef5c55f..a7a02473e7e9 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -1040,24 +1040,21 @@ static void brcmf_fws_schedule_deq(struct brcmf_fws_info *fws)
 		queue_work(fws->fws_wq, &fws->fws_dequeue_work);
 }
 
-static void brcmf_skb_pick_up_credit(struct brcmf_fws_info *fws, int fifo,
+static void brcmf_fws_skb_pickup_credit(struct brcmf_fws_info *fws, int fifo,
 				     struct sk_buff *p)
 {
 	struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(p)->mac;
 
-	if (brcmf_skbcb(p)->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK) {
-		if (fws->fcmode != BRCMF_FWS_FCMODE_IMPLIED_CREDIT)
-			return;
+	if (brcmf_skbcb(p)->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK)
 		brcmf_fws_return_credits(fws, fifo, 1);
-	} else {
+	else if (!brcmf_skb_if_flags_get_field(p, REQUESTED))
 		/*
 		 * if this packet did not count against FIFO credit, it
 		 * must have taken a requested_credit from the destination
 		 * entry (for pspoll etc.)
 		 */
-		if (!brcmf_skb_if_flags_get_field(p, REQUESTED))
-			entry->requested_credit++;
-	}
+		entry->requested_credit++;
+
 	brcmf_fws_schedule_deq(fws);
 }
 
@@ -1272,7 +1269,9 @@ brcmf_fws_txstatus_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot,
 
 	/* pick up the implicit credit from this packet */
 	fifo = brcmf_skb_htod_tag_get_field(skb, FIFO);
-	brcmf_skb_pick_up_credit(fws, fifo, skb);
+	if (fws->fcmode == BRCMF_FWS_FCMODE_IMPLIED_CREDIT ||
+	    !(brcmf_skbcb(skb)->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK))
+		brcmf_fws_skb_pickup_credit(fws, fifo, skb);
 
 	if (!remove_from_hanger)
 		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, genbit);
@@ -1845,7 +1844,7 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 	} else {
 		if (brcmf_fws_commit_skb(fws, fifo, skb))
 			if (!multicast)
-				brcmf_skb_pick_up_credit(fws, fifo, skb);
+				brcmf_fws_skb_pickup_credit(fws, fifo, skb);
 	}
 	brcmf_fws_unlock(drvr, flags);
 	return 0;
@@ -2053,18 +2052,15 @@ bool brcmf_fws_fc_active(struct brcmf_fws_info *fws)
 void brcmf_fws_bustxfail(struct brcmf_fws_info *fws, struct sk_buff *skb)
 {
 	ulong flags;
+	int fifo;
 
 	brcmf_fws_lock(fws->drvr, flags);
 	brcmf_fws_txstatus_process(fws, BRCMF_FWS_TXSTATUS_FW_TOSSED,
 				   brcmf_skb_htod_tag_get_field(skb, HSLOT), 0);
 	/* the packet never reached firmware so reclaim credit */
-	if (fws->fcmode == BRCMF_FWS_FCMODE_EXPLICIT_CREDIT &&
-	    brcmf_skbcb(skb)->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK) {
-		brcmf_fws_return_credits(fws,
-					 brcmf_skb_htod_tag_get_field(skb,
-								      FIFO),
-					 1);
-		brcmf_fws_schedule_deq(fws);
+	if (fws->fcmode == BRCMF_FWS_FCMODE_EXPLICIT_CREDIT) {
+		fifo = brcmf_skb_htod_tag_get_field(skb, FIFO);
+		brcmf_fws_skb_pickup_credit(fws, fifo, skb);
 	}
 	brcmf_fws_unlock(fws->drvr, flags);
 }
-- 
cgit v1.2.3


From 289ec1c71911fe4b1b9bab25ae4a2ab75036b72d Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 6 Jun 2013 13:17:50 +0200
Subject: brcmfmac: explicitly indicate sk_buff is sent upon request credit

Firmware can request the driver for transmit packets using two different
signals. Only for one signal a flag was set in the sk_buff control
buffer. This patch adds explicit flag for the other signal as well.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 122 +++++++++------------
 1 file changed, 53 insertions(+), 69 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index a7a02473e7e9..d080874a14ab 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -190,13 +190,16 @@ struct brcmf_skbuff_cb {
 /*
  * sk_buff control if flags
  *
- *	b[11]  - packet sent upon firmware request.
+ *	b[12]  - packet sent upon credit request.
+ *	b[11]  - packet sent upon packet request.
  *	b[10]  - packet only contains signalling data.
  *	b[9]   - packet is a tx packet.
  *	b[8]   - packet uses FIFO credit (non-pspoll).
  *	b[7]   - interface in AP mode.
  *	b[3:0] - interface index.
  */
+#define BRCMF_SKB_IF_FLAGS_REQ_CREDIT_MASK	0x1000
+#define BRCMF_SKB_IF_FLAGS_REQ_CREDIT_SHIFT	12
 #define BRCMF_SKB_IF_FLAGS_REQUESTED_MASK	0x0800
 #define BRCMF_SKB_IF_FLAGS_REQUESTED_SHIFT	11
 #define BRCMF_SKB_IF_FLAGS_SIGNAL_ONLY_MASK	0x0400
@@ -998,6 +1001,37 @@ static int brcmf_fws_request_indicate(struct brcmf_fws_info *fws, u8 type,
 	return BRCMF_FWS_RET_OK_SCHEDULE;
 }
 
+static int brcmf_fws_macdesc_use_credit(struct brcmf_fws_mac_descriptor *entry,
+					struct sk_buff *skb)
+{
+	int use_credit = 1;
+
+	if (entry->state == BRCMF_FWS_STATE_CLOSE) {
+		if (entry->requested_credit > 0) {
+			/*
+			 * if the packet was pulled out while destination is in
+			 * closed state but had a non-zero packets requested,
+			 * then this should not count against the FIFO credit.
+			 * That is due to the fact that the firmware will
+			 * most likely hold onto this packet until a suitable
+			 * time later to push it to the appropriate AC FIFO.
+			 */
+			entry->requested_credit--;
+			brcmf_skb_if_flags_set_field(skb, REQ_CREDIT, 1);
+			use_credit = 0;
+		} else if (entry->requested_packet > 0) {
+			entry->requested_packet--;
+			brcmf_skb_if_flags_set_field(skb, REQUESTED, 1);
+			use_credit = 0;
+		}
+	} else {
+		WARN_ON(entry->requested_credit);
+		WARN_ON(entry->requested_packet);
+	}
+	brcmf_skb_if_flags_set_field(skb, CREDITCHECK, use_credit);
+	return use_credit;
+}
+
 static void brcmf_fws_return_credits(struct brcmf_fws_info *fws,
 				     u8 fifo, u8 credits)
 {
@@ -1047,10 +1081,11 @@ static void brcmf_fws_skb_pickup_credit(struct brcmf_fws_info *fws, int fifo,
 
 	if (brcmf_skbcb(p)->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK)
 		brcmf_fws_return_credits(fws, fifo, 1);
-	else if (!brcmf_skb_if_flags_get_field(p, REQUESTED))
+	else if (brcmf_skb_if_flags_get_field(p, REQ_CREDIT) &&
+		 entry->state == BRCMF_FWS_STATE_CLOSE)
 		/*
 		 * if this packet did not count against FIFO credit, it
-		 * must have taken a requested_credit from the destination
+		 * could have taken a requested_credit from the destination
 		 * entry (for pspoll etc.)
 		 */
 		entry->requested_credit++;
@@ -1108,7 +1143,6 @@ static struct sk_buff *brcmf_fws_deq(struct brcmf_fws_info *fws, int fifo)
 	struct brcmf_fws_mac_descriptor *table;
 	struct brcmf_fws_mac_descriptor *entry;
 	struct sk_buff *p;
-	int use_credit = 1;
 	int num_nodes;
 	int node_pos;
 	int prec_out;
@@ -1143,26 +1177,7 @@ static struct sk_buff *brcmf_fws_deq(struct brcmf_fws_info *fws, int fifo)
 		if  (p == NULL)
 			continue;
 
-		/* did the packet come from suppress sub-queue? */
-		if (entry->requested_credit > 0) {
-			entry->requested_credit--;
-			/*
-			 * if the packet was pulled out while destination is in
-			 * closed state but had a non-zero packets requested,
-			 * then this should not count against the FIFO credit.
-			 * That is due to the fact that the firmware will
-			 * most likely hold onto this packet until a suitable
-			 * time later to push it to the appropriate AC FIFO.
-			 */
-			if (entry->state == BRCMF_FWS_STATE_CLOSE)
-				use_credit = 0;
-		} else if (entry->requested_packet > 0) {
-			entry->requested_packet--;
-			brcmf_skb_if_flags_set_field(p, REQUESTED, 1);
-			if (entry->state == BRCMF_FWS_STATE_CLOSE)
-				use_credit = 0;
-		}
-		brcmf_skb_if_flags_set_field(p, CREDITCHECK, use_credit);
+		brcmf_fws_macdesc_use_credit(entry, p);
 
 		/* move dequeue position to ensure fair round-robin */
 		fws->deq_node_pos[fifo] = (node_pos + i + 1) % num_nodes;
@@ -1664,13 +1679,6 @@ brcmf_fws_rollback_toq(struct brcmf_fws_info *fws,
 			/* decrement sequence count */
 			entry->seq[fifo]--;
 		}
-		/*
-		if this packet did not count against FIFO credit, it must have
-		taken a requested_credit from the firmware (for pspoll etc.)
-		*/
-		if (!(brcmf_skbcb(skb)->if_flags &
-		      BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK))
-			entry->requested_credit++;
 	} else {
 		brcmf_err("no mac entry linked\n");
 		rc = -ENOENT;
@@ -1679,10 +1687,12 @@ brcmf_fws_rollback_toq(struct brcmf_fws_info *fws,
 
 fail:
 	if (rc) {
-		brcmf_txfinalize(fws->drvr, skb, false);
+		brcmf_fws_bustxfail(fws, skb);
 		fws->stats.rollback_failed++;
-	} else
+	} else {
 		fws->stats.rollback_success++;
+		brcmf_fws_skb_pickup_credit(fws, fifo, skb);
+	}
 }
 
 static int brcmf_fws_borrow_credit(struct brcmf_fws_info *fws)
@@ -1710,30 +1720,10 @@ static int brcmf_fws_consume_credit(struct brcmf_fws_info *fws, int fifo,
 {
 	struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac;
 	int *credit = &fws->fifo_credit[fifo];
-	int use_credit = 1;
 
 	brcmf_dbg(TRACE, "enter: ac=%d, credits=%d\n", fifo, *credit);
 
-	if (entry->requested_credit > 0) {
-		/*
-		 * if the packet was pulled out while destination is in
-		 * closed state but had a non-zero packets requested,
-		 * then this should not count against the FIFO credit.
-		 * That is due to the fact that the firmware will
-		 * most likely hold onto this packet until a suitable
-		 * time later to push it to the appropriate AC FIFO.
-		 */
-		entry->requested_credit--;
-		if (entry->state == BRCMF_FWS_STATE_CLOSE)
-			use_credit = 0;
-	} else if (entry->requested_packet > 0) {
-		entry->requested_packet--;
-		brcmf_skb_if_flags_set_field(skb, REQUESTED, 1);
-		if (entry->state == BRCMF_FWS_STATE_CLOSE)
-			use_credit = 0;
-	}
-	brcmf_skb_if_flags_set_field(skb, CREDITCHECK, use_credit);
-	if (!use_credit) {
+	if (!brcmf_fws_macdesc_use_credit(entry, skb)) {
 		brcmf_dbg(TRACE, "exit: no creditcheck set\n");
 		return 0;
 	}
@@ -1842,9 +1832,7 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 		drvr->fws->fifo_delay_map |= 1 << fifo;
 		brcmf_fws_enq(fws, BRCMF_FWS_SKBSTATE_DELAYED, fifo, skb);
 	} else {
-		if (brcmf_fws_commit_skb(fws, fifo, skb))
-			if (!multicast)
-				brcmf_fws_skb_pickup_credit(fws, fifo, skb);
+		brcmf_fws_commit_skb(fws, fifo, skb);
 	}
 	brcmf_fws_unlock(drvr, flags);
 	return 0;
@@ -1900,7 +1888,6 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker)
 	struct sk_buff *skb;
 	ulong flags;
 	int fifo;
-	int credit;
 
 	fws = container_of(worker, struct brcmf_fws_info, fws_dequeue_work);
 
@@ -1910,35 +1897,32 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker)
 	     fifo--) {
 		brcmf_dbg(TRACE, "fifo %d credit %d\n", fifo,
 			  fws->fifo_credit[fifo]);
-		for (credit = 0; credit < fws->fifo_credit[fifo]; /* nop */) {
+		while (fws->fifo_credit[fifo]) {
 			skb = brcmf_fws_deq(fws, fifo);
-			if (!skb || brcmf_fws_commit_skb(fws, fifo, skb))
+			if (!skb)
 				break;
 			if (brcmf_skbcb(skb)->if_flags &
 			    BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK)
-				credit++;
+				fws->fifo_credit[fifo]--;
+
+			if (brcmf_fws_commit_skb(fws, fifo, skb))
+				break;
 			if (fws->bus_flow_blocked)
 				break;
 		}
 		if ((fifo == BRCMF_FWS_FIFO_AC_BE) &&
-		    (credit == fws->fifo_credit[fifo]) &&
+		    (fws->fifo_credit[fifo] == 0) &&
 		    (!fws->bus_flow_blocked)) {
-			fws->fifo_credit[fifo] -= credit;
 			while (brcmf_fws_borrow_credit(fws) == 0) {
 				skb = brcmf_fws_deq(fws, fifo);
 				if (!skb) {
 					brcmf_fws_return_credits(fws, fifo, 1);
 					break;
 				}
-				if (brcmf_fws_commit_skb(fws, fifo, skb)) {
-					brcmf_fws_return_credits(fws, fifo, 1);
-					break;
-				}
+				brcmf_fws_commit_skb(fws, fifo, skb);
 				if (fws->bus_flow_blocked)
 					break;
 			}
-		} else {
-			fws->fifo_credit[fifo] -= credit;
 		}
 	}
 	brcmf_fws_unlock(fws->drvr, flags);
-- 
cgit v1.2.3


From 8071fd61b421f5c9b9a67a7c222c1f5581bcf0f3 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 6 Jun 2013 13:17:51 +0200
Subject: brcmfmac: reducing debug logging in firmware-signalling code

The debug logging in firmware-signalling code was rather extensive and
for a large part in the data path. This patch removes large part or the
level is changed to DATA level.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/brcm80211/brcmfmac/dhd_linux.c    |   4 +-
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 124 +++++++++++----------
 2 files changed, 66 insertions(+), 62 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index df37645f493e..9450d10b0fb9 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -179,7 +179,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb,
 	struct brcmf_pub *drvr = ifp->drvr;
 	struct ethhdr *eh;
 
-	brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx);
+	brcmf_dbg(DATA, "Enter, idx=%d\n", ifp->bssidx);
 
 	/* Can the device send data? */
 	if (drvr->bus_if->state != BRCMF_BUS_DATA) {
@@ -287,7 +287,7 @@ void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list)
 	u8 ifidx;
 	int ret;
 
-	brcmf_dbg(TRACE, "Enter\n");
+	brcmf_dbg(DATA, "Enter\n");
 
 	skb_queue_walk_safe(skb_list, skb, pnext) {
 		skb_unlink(skb, skb_list);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index d080874a14ab..73e3e1dc073a 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -343,6 +343,7 @@ enum brcmf_fws_mac_desc_state {
  * @transit_count: packet in transit to firmware.
  */
 struct brcmf_fws_mac_descriptor {
+	char name[16];
 	u8 occupied;
 	u8 mac_handle;
 	u8 interface_id;
@@ -508,7 +509,6 @@ static void brcmf_fws_hanger_init(struct brcmf_fws_hanger *hanger)
 {
 	int i;
 
-	brcmf_dbg(TRACE, "enter\n");
 	memset(hanger, 0, sizeof(*hanger));
 	for (i = 0; i < ARRAY_SIZE(hanger->items); i++)
 		hanger->items[i].state = BRCMF_FWS_HANGER_ITEM_STATE_FREE;
@@ -518,7 +518,6 @@ static u32 brcmf_fws_hanger_get_free_slot(struct brcmf_fws_hanger *h)
 {
 	u32 i;
 
-	brcmf_dbg(TRACE, "enter\n");
 	i = (h->slot_pos + 1) % BRCMF_FWS_HANGER_MAXITEMS;
 
 	while (i != h->slot_pos) {
@@ -534,14 +533,12 @@ static u32 brcmf_fws_hanger_get_free_slot(struct brcmf_fws_hanger *h)
 	h->failed_slotfind++;
 	i = BRCMF_FWS_HANGER_MAXITEMS;
 done:
-	brcmf_dbg(TRACE, "exit: %d\n", i);
 	return i;
 }
 
 static int brcmf_fws_hanger_pushpkt(struct brcmf_fws_hanger *h,
 					   struct sk_buff *pkt, u32 slot_id)
 {
-	brcmf_dbg(TRACE, "enter\n");
 	if (slot_id >= BRCMF_FWS_HANGER_MAXITEMS)
 		return -ENOENT;
 
@@ -561,7 +558,6 @@ static int brcmf_fws_hanger_poppkt(struct brcmf_fws_hanger *h,
 					  u32 slot_id, struct sk_buff **pktout,
 					  bool remove_item)
 {
-	brcmf_dbg(TRACE, "enter\n");
 	if (slot_id >= BRCMF_FWS_HANGER_MAXITEMS)
 		return -ENOENT;
 
@@ -584,8 +580,6 @@ static int brcmf_fws_hanger_poppkt(struct brcmf_fws_hanger *h,
 static int brcmf_fws_hanger_mark_suppressed(struct brcmf_fws_hanger *h,
 						   u32 slot_id, u8 gen)
 {
-	brcmf_dbg(TRACE, "enter\n");
-
 	if (slot_id >= BRCMF_FWS_HANGER_MAXITEMS)
 		return -ENOENT;
 
@@ -604,7 +598,6 @@ static int brcmf_fws_hanger_get_genbit(struct brcmf_fws_hanger *hanger,
 					      struct sk_buff *pkt, u32 slot_id,
 					      int *gen)
 {
-	brcmf_dbg(TRACE, "enter\n");
 	*gen = 0xff;
 
 	if (slot_id >= BRCMF_FWS_HANGER_MAXITEMS)
@@ -628,7 +621,6 @@ static void brcmf_fws_hanger_cleanup(struct brcmf_fws_info *fws,
 	int i;
 	enum brcmf_fws_hanger_item_state s;
 
-	brcmf_dbg(TRACE, "enter: ifidx=%d\n", ifidx);
 	for (i = 0; i < ARRAY_SIZE(h->items); i++) {
 		s = h->items[i].state;
 		if (s == BRCMF_FWS_HANGER_ITEM_STATE_INUSE ||
@@ -645,6 +637,19 @@ static void brcmf_fws_hanger_cleanup(struct brcmf_fws_info *fws,
 	}
 }
 
+static void brcmf_fws_macdesc_set_name(struct brcmf_fws_info *fws,
+				       struct brcmf_fws_mac_descriptor *desc)
+{
+	if (desc == &fws->desc.other)
+		strlcpy(desc->name, "MAC-OTHER", sizeof(desc->name));
+	else if (desc->mac_handle)
+		scnprintf(desc->name, sizeof(desc->name), "MAC-%d:%d",
+			  desc->mac_handle, desc->interface_id);
+	else
+		scnprintf(desc->name, sizeof(desc->name), "MACIF:%d",
+			  desc->interface_id);
+}
+
 static void brcmf_fws_init_mac_descriptor(struct brcmf_fws_mac_descriptor *desc,
 					  u8 *addr, u8 ifidx)
 {
@@ -676,7 +681,6 @@ brcmf_fws_mac_descriptor_lookup(struct brcmf_fws_info *fws, u8 *ea)
 	struct brcmf_fws_mac_descriptor *entry;
 	int i;
 
-	brcmf_dbg(TRACE, "enter: ea=%pM\n", ea);
 	if (ea == NULL)
 		return ERR_PTR(-EINVAL);
 
@@ -698,8 +702,6 @@ brcmf_fws_find_mac_desc(struct brcmf_fws_info *fws, struct brcmf_if *ifp,
 	bool multicast;
 	enum nl80211_iftype iftype;
 
-	brcmf_dbg(TRACE, "enter: idx=%d\n", ifp->bssidx);
-
 	multicast = is_multicast_ether_addr(da);
 	iftype = brcmf_cfg80211_get_iftype(ifp);
 
@@ -720,7 +722,6 @@ brcmf_fws_find_mac_desc(struct brcmf_fws_info *fws, struct brcmf_if *ifp,
 		entry = &fws->desc.other;
 
 done:
-	brcmf_dbg(TRACE, "exit: entry=%p\n", entry);
 	return entry;
 }
 
@@ -753,11 +754,7 @@ static void brcmf_fws_mac_desc_cleanup(struct brcmf_fws_info *fws,
 				       struct brcmf_fws_mac_descriptor *entry,
 				       int ifidx)
 {
-	brcmf_dbg(TRACE, "enter: entry=(ea=%pM, ifid=%d), ifidx=%d\n",
-		  entry->ea, entry->interface_id, ifidx);
 	if (entry->occupied && (ifidx == -1 || ifidx == entry->interface_id)) {
-		brcmf_dbg(TRACE, "flush psq: ifidx=%d, qlen=%d\n",
-			  ifidx, entry->psq.len);
 		brcmf_fws_psq_flush(fws, &entry->psq, ifidx);
 		entry->occupied = !!(entry->psq.len);
 	}
@@ -773,7 +770,6 @@ static void brcmf_fws_bus_txq_cleanup(struct brcmf_fws_info *fws,
 	int prec;
 	u32 hslot;
 
-	brcmf_dbg(TRACE, "enter: ifidx=%d\n", ifidx);
 	txq = brcmf_bus_gettxq(fws->drvr->bus_if);
 	if (IS_ERR(txq)) {
 		brcmf_dbg(TRACE, "no txq to clean up\n");
@@ -799,7 +795,6 @@ static void brcmf_fws_cleanup(struct brcmf_fws_info *fws, int ifidx)
 	struct brcmf_fws_mac_descriptor *table;
 	bool (*matchfn)(struct sk_buff *, void *) = NULL;
 
-	brcmf_dbg(TRACE, "enter: ifidx=%d\n", ifidx);
 	if (fws == NULL)
 		return;
 
@@ -820,7 +815,6 @@ static void brcmf_fws_tim_update(struct brcmf_fws_info *ctx,
 				 struct brcmf_fws_mac_descriptor *entry,
 				 int prec)
 {
-	brcmf_dbg(TRACE, "enter: ea=%pM\n", entry->ea);
 	if (entry->state == BRCMF_FWS_STATE_CLOSE) {
 		/* check delayedQ and suppressQ in one call using bitmap */
 		if (brcmu_pktq_mlen(&entry->psq, 3 << (prec * 2)) == 0)
@@ -877,8 +871,9 @@ int brcmf_fws_macdesc_indicate(struct brcmf_fws_info *fws, u8 type, u8 *data)
 
 	entry = &fws->desc.nodes[mac_handle & 0x1F];
 	if (type == BRCMF_FWS_TYPE_MACDESC_DEL) {
-		brcmf_dbg(TRACE, "deleting mac %pM idx %d\n", addr, ifidx);
 		if (entry->occupied) {
+			brcmf_dbg(TRACE, "deleting %s mac %pM\n",
+				  entry->name, addr);
 			brcmf_fws_mac_desc_cleanup(fws, entry, -1);
 			brcmf_fws_clear_mac_descriptor(entry);
 		} else
@@ -886,25 +881,28 @@ int brcmf_fws_macdesc_indicate(struct brcmf_fws_info *fws, u8 type, u8 *data)
 		return 0;
 	}
 
-	brcmf_dbg(TRACE,
-		  "add mac %pM handle %u idx %d\n", addr, mac_handle, ifidx);
 	existing = brcmf_fws_mac_descriptor_lookup(fws, addr);
 	if (IS_ERR(existing)) {
 		if (!entry->occupied) {
 			entry->mac_handle = mac_handle;
 			brcmf_fws_init_mac_descriptor(entry, addr, ifidx);
+			brcmf_fws_macdesc_set_name(fws, entry);
 			brcmu_pktq_init(&entry->psq, BRCMF_FWS_PSQ_PREC_COUNT,
 					BRCMF_FWS_PSQ_LEN);
+			brcmf_dbg(TRACE, "add %s mac %pM\n", entry->name, addr);
 		} else {
 			fws->stats.mac_update_failed++;
 		}
 	} else {
 		if (entry != existing) {
-			brcmf_dbg(TRACE, "relocate mac\n");
+			brcmf_dbg(TRACE, "copy mac %s\n", existing->name);
 			memcpy(entry, existing,
 			       offsetof(struct brcmf_fws_mac_descriptor, psq));
 			entry->mac_handle = mac_handle;
 			brcmf_fws_clear_mac_descriptor(existing);
+			brcmf_fws_macdesc_set_name(fws, entry);
+			brcmf_dbg(TRACE, "relocate %s mac %pM\n", entry->name,
+				  addr);
 		} else {
 			brcmf_dbg(TRACE, "use existing\n");
 			WARN_ON(entry->mac_handle != mac_handle);
@@ -928,6 +926,8 @@ static int brcmf_fws_macdesc_state_indicate(struct brcmf_fws_info *fws,
 		return -ESRCH;
 	}
 
+	brcmf_dbg(TRACE, "%s (%d): %s\n", brcmf_fws_get_tlv_name(type), type,
+		  entry->name);
 	/* a state update should wipe old credits? */
 	entry->requested_credit = 0;
 	if (type == BRCMF_FWS_TYPE_MAC_OPEN) {
@@ -950,7 +950,6 @@ static int brcmf_fws_interface_state_indicate(struct brcmf_fws_info *fws,
 
 	ifidx = data[0];
 
-	brcmf_dbg(TRACE, "enter: ifidx=%d\n", ifidx);
 	if (ifidx >= BRCMF_MAX_IFS) {
 		ret = -ERANGE;
 		goto fail;
@@ -962,6 +961,8 @@ static int brcmf_fws_interface_state_indicate(struct brcmf_fws_info *fws,
 		goto fail;
 	}
 
+	brcmf_dbg(TRACE, "%s (%d): %s\n", brcmf_fws_get_tlv_name(type), type,
+		  entry->name);
 	switch (type) {
 	case BRCMF_FWS_TYPE_INTERFACE_OPEN:
 		entry->state = BRCMF_FWS_STATE_OPEN;
@@ -992,6 +993,9 @@ static int brcmf_fws_request_indicate(struct brcmf_fws_info *fws, u8 type,
 		return -ESRCH;
 	}
 
+	brcmf_dbg(TRACE, "%s (%d): %s cnt %d bmp %d\n",
+		  brcmf_fws_get_tlv_name(type), type, entry->name,
+		  data[0], data[2]);
 	if (type == BRCMF_FWS_TYPE_MAC_REQUEST_CREDIT)
 		entry->requested_credit = data[0];
 	else
@@ -1108,7 +1112,7 @@ static int brcmf_fws_enq(struct brcmf_fws_info *fws,
 		return -ENOENT;
 	}
 
-	brcmf_dbg(TRACE, "enter: ea=%pM, qlen=%d\n", entry->ea, entry->psq.len);
+	brcmf_dbg(DATA, "enter: fifo %d skb %p\n", fifo, p);
 	if (state == BRCMF_FWS_SKBSTATE_SUPPRESSED) {
 		prec += 1;
 		qfull_stat = &fws->stats.supprq_full_error;
@@ -1202,7 +1206,7 @@ static struct sk_buff *brcmf_fws_deq(struct brcmf_fws_info *fws, int fifo)
 	}
 	p = NULL;
 done:
-	brcmf_dbg(TRACE, "exit: fifo %d skb %p\n", fifo, p);
+	brcmf_dbg(DATA, "exit: fifo %d skb %p\n", fifo, p);
 	return p;
 }
 
@@ -1221,6 +1225,9 @@ static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo,
 		entry->suppress_count = brcmu_pktq_mlen(&entry->psq,
 							1 << (fifo * 2 + 1));
 		entry->suppr_transit_count = entry->transit_count;
+		brcmf_dbg(DATA, "suppress %s: supp_cnt %d transit %d\n",
+			  entry->name, entry->suppress_count,
+			  entry->transit_count);
 	}
 
 	entry->generation = genbit;
@@ -1244,17 +1251,17 @@ static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo,
 }
 
 static int
-brcmf_fws_txstatus_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot,
+brcmf_fws_txs_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot,
 			   u32 genbit)
 {
 	u32 fifo;
 	int ret;
 	bool remove_from_hanger = true;
 	struct sk_buff *skb;
+	struct brcmf_skbuff_cb *skcb;
 	struct brcmf_fws_mac_descriptor *entry = NULL;
 
-	brcmf_dbg(TRACE, "status: flags=0x%X, hslot=%d\n",
-		  flags, hslot);
+	brcmf_dbg(DATA, "flags %d\n", flags);
 
 	if (flags == BRCMF_FWS_TXSTATUS_DISCARD)
 		fws->stats.txs_discard++;
@@ -1276,12 +1283,16 @@ brcmf_fws_txstatus_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot,
 		return ret;
 	}
 
-	entry = brcmf_skbcb(skb)->mac;
+	skcb = brcmf_skbcb(skb);
+	entry = skcb->mac;
 	if (WARN_ON(!entry)) {
 		brcmu_pkt_buf_free_skb(skb);
 		return -EINVAL;
 	}
 
+	brcmf_dbg(DATA, "%s flags %X htod %X\n", entry->name, skcb->if_flags,
+		  skcb->htod);
+
 	/* pick up the implicit credit from this packet */
 	fifo = brcmf_skb_htod_tag_get_field(skb, FIFO);
 	if (fws->fcmode == BRCMF_FWS_FCMODE_IMPLIED_CREDIT ||
@@ -1311,11 +1322,11 @@ static int brcmf_fws_fifocreditback_indicate(struct brcmf_fws_info *fws,
 		return BRCMF_FWS_RET_OK_NOSCHEDULE;
 	}
 
-	brcmf_dbg(TRACE, "enter: data %pM\n", data);
+	brcmf_dbg(DATA, "enter: data %pM\n", data);
 	for (i = 0; i < BRCMF_FWS_FIFO_COUNT; i++)
 		brcmf_fws_return_credits(fws, i, data[i]);
 
-	brcmf_dbg(INFO, "map: credit %x delay %x\n", fws->fifo_credit_map,
+	brcmf_dbg(DATA, "map: credit %x delay %x\n", fws->fifo_credit_map,
 		  fws->fifo_delay_map);
 	return BRCMF_FWS_RET_OK_SCHEDULE;
 }
@@ -1335,7 +1346,7 @@ static int brcmf_fws_txstatus_indicate(struct brcmf_fws_info *fws, u8 *data)
 	hslot = brcmf_txstatus_get_field(status, HSLOT);
 	genbit = brcmf_txstatus_get_field(status, GENERATION);
 
-	return brcmf_fws_txstatus_process(fws, flags, hslot, genbit);
+	return brcmf_fws_txs_process(fws, flags, hslot, genbit);
 }
 
 static int brcmf_fws_dbg_seqnum_check(struct brcmf_fws_info *fws, u8 *data)
@@ -1343,7 +1354,7 @@ static int brcmf_fws_dbg_seqnum_check(struct brcmf_fws_info *fws, u8 *data)
 	__le32 timestamp;
 
 	memcpy(&timestamp, &data[2], sizeof(timestamp));
-	brcmf_dbg(INFO, "received: seq %d, timestamp %d\n", data[1],
+	brcmf_dbg(CTL, "received: seq %d, timestamp %d\n", data[1],
 		  le32_to_cpu(timestamp));
 	return 0;
 }
@@ -1404,7 +1415,7 @@ int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len,
 	s32 status;
 	s32 err;
 
-	brcmf_dbg(TRACE, "enter: ifidx %d, skblen %u, sig %d\n",
+	brcmf_dbg(HDRS, "enter: ifidx %d, skblen %u, sig %d\n",
 		  ifidx, skb->len, signal_len);
 
 	WARN_ON(signal_len > skb->len);
@@ -1438,8 +1449,9 @@ int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len,
 		len = signal_data[1];
 		data = signal_data + 2;
 
-		brcmf_dbg(INFO, "tlv type=%d (%s), len=%d, data[0]=%d\n", type,
-			  brcmf_fws_get_tlv_name(type), len, *data);
+		brcmf_dbg(HDRS, "tlv type=%s (%d), len=%d (%d)\n",
+			  brcmf_fws_get_tlv_name(type), type, len,
+			  brcmf_fws_get_tlv_len(fws, type));
 
 		/* abort parsing when length invalid */
 		if (data_len < len + 2)
@@ -1522,8 +1534,6 @@ static int brcmf_fws_hdrpush(struct brcmf_fws_info *fws, struct sk_buff *skb)
 	u8 fillers;
 	__le32 pkttag = cpu_to_le32(brcmf_skbcb(skb)->htod);
 
-	brcmf_dbg(TRACE, "enter: ea=%pM, ifidx=%u, pkttag=0x%08X\n",
-		  entry->ea, entry->interface_id, le32_to_cpu(pkttag));
 	if (entry->send_tim_signal)
 		data_offset += 2 + BRCMF_FWS_TYPE_PENDING_TRAFFIC_BMP_LEN;
 
@@ -1708,7 +1718,7 @@ static int brcmf_fws_borrow_credit(struct brcmf_fws_info *fws)
 			fws->fifo_credit[lender_ac]--;
 			if (fws->fifo_credit[lender_ac] == 0)
 				fws->fifo_credit_map &= ~(1 << lender_ac);
-			brcmf_dbg(TRACE, "borrow credit from: %d\n", lender_ac);
+			brcmf_dbg(DATA, "borrow credit from: %d\n", lender_ac);
 			return 0;
 		}
 	}
@@ -1721,12 +1731,8 @@ static int brcmf_fws_consume_credit(struct brcmf_fws_info *fws, int fifo,
 	struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac;
 	int *credit = &fws->fifo_credit[fifo];
 
-	brcmf_dbg(TRACE, "enter: ac=%d, credits=%d\n", fifo, *credit);
-
-	if (!brcmf_fws_macdesc_use_credit(entry, skb)) {
-		brcmf_dbg(TRACE, "exit: no creditcheck set\n");
+	if (!brcmf_fws_macdesc_use_credit(entry, skb))
 		return 0;
-	}
 
 	if (fifo != BRCMF_FWS_FIFO_AC_BE)
 		fws->borrow_defer_timestamp = jiffies +
@@ -1738,13 +1744,13 @@ static int brcmf_fws_consume_credit(struct brcmf_fws_info *fws, int fifo,
 		    brcmf_fws_borrow_credit(fws) == 0)
 			return 0;
 
-		brcmf_dbg(TRACE, "exit: ac=%d, credits depleted\n", fifo);
+		brcmf_dbg(DATA, "exit: ac=%d, credits depleted\n", fifo);
 		return -ENAVAIL;
 	}
 	(*credit)--;
 	if (!(*credit))
 		fws->fifo_credit_map &= ~(1 << fifo);
-	brcmf_dbg(TRACE, "exit: ac=%d, credits=%d\n", fifo, *credit);
+	brcmf_dbg(DATA, "exit: ac=%d, credits=%d\n", fifo, *credit);
 	return 0;
 }
 
@@ -1766,6 +1772,8 @@ static int brcmf_fws_commit_skb(struct brcmf_fws_info *fws, int fifo,
 		goto rollback;
 	}
 
+	brcmf_dbg(DATA, "%s flags %X htod %X\n", entry->name, skcb->if_flags,
+		  skcb->htod);
 	rc = brcmf_bus_txdata(bus, skb);
 	if (rc < 0)
 		goto rollback;
@@ -1818,8 +1826,8 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 	if (!multicast)
 		fifo = brcmf_fws_prio2fifo[skb->priority];
 
-	brcmf_dbg(TRACE, "ea=%pM, multi=%d, fifo=%d\n", eh->h_dest,
-		  multicast, fifo);
+	brcmf_dbg(DATA, "%s mac %pM multi %d fifo %d\n", skcb->mac->name,
+		  eh->h_dest, multicast, fifo);
 
 	brcmf_fws_lock(drvr, flags);
 	if (skcb->mac->suppressed ||
@@ -1854,16 +1862,16 @@ void brcmf_fws_add_interface(struct brcmf_if *ifp)
 	struct brcmf_fws_info *fws = ifp->drvr->fws;
 	struct brcmf_fws_mac_descriptor *entry;
 
-	brcmf_dbg(TRACE, "enter: idx=%d, mac=%pM\n",
-		  ifp->bssidx, ifp->mac_addr);
 	if (!ifp->ndev || !ifp->drvr->fw_signals)
 		return;
 
 	entry = &fws->desc.iface[ifp->ifidx];
 	ifp->fws_desc = entry;
 	brcmf_fws_init_mac_descriptor(entry, ifp->mac_addr, ifp->ifidx);
+	brcmf_fws_macdesc_set_name(fws, entry);
 	brcmu_pktq_init(&entry->psq, BRCMF_FWS_PSQ_PREC_COUNT,
 			BRCMF_FWS_PSQ_LEN);
+	brcmf_dbg(TRACE, "added %s\n", entry->name);
 }
 
 void brcmf_fws_del_interface(struct brcmf_if *ifp)
@@ -1871,12 +1879,12 @@ void brcmf_fws_del_interface(struct brcmf_if *ifp)
 	struct brcmf_fws_mac_descriptor *entry = ifp->fws_desc;
 	ulong flags;
 
-	brcmf_dbg(TRACE, "enter: idx=%d\n", ifp->bssidx);
 	if (!entry)
 		return;
 
 	brcmf_fws_lock(ifp->drvr, flags);
 	ifp->fws_desc = NULL;
+	brcmf_dbg(TRACE, "deleting %s\n", entry->name);
 	brcmf_fws_clear_mac_descriptor(entry);
 	brcmf_fws_cleanup(ifp->drvr->fws, ifp->ifidx);
 	brcmf_fws_unlock(ifp->drvr, flags);
@@ -1891,12 +1899,9 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker)
 
 	fws = container_of(worker, struct brcmf_fws_info, fws_dequeue_work);
 
-	brcmf_dbg(TRACE, "enter: fws=%p\n", fws);
 	brcmf_fws_lock(fws->drvr, flags);
 	for (fifo = NL80211_NUM_ACS; fifo >= 0 && !fws->bus_flow_blocked;
 	     fifo--) {
-		brcmf_dbg(TRACE, "fifo %d credit %d\n", fifo,
-			  fws->fifo_credit[fifo]);
 		while (fws->fifo_credit[fifo]) {
 			skb = brcmf_fws_deq(fws, fifo);
 			if (!skb)
@@ -1980,14 +1985,14 @@ int brcmf_fws_init(struct brcmf_pub *drvr)
 
 	brcmf_fws_hanger_init(&drvr->fws->hanger);
 	brcmf_fws_init_mac_descriptor(&drvr->fws->desc.other, NULL, 0);
+	brcmf_fws_macdesc_set_name(drvr->fws, &drvr->fws->desc.other);
 	brcmu_pktq_init(&drvr->fws->desc.other.psq, BRCMF_FWS_PSQ_PREC_COUNT,
 			BRCMF_FWS_PSQ_LEN);
 
 	/* create debugfs file for statistics */
 	brcmf_debugfs_create_fws_stats(drvr, &drvr->fws->stats);
 
-	/* TODO: remove upon feature delivery */
-	brcmf_err("%s bdcv2 tlv signaling [%x]\n",
+	brcmf_dbg(INFO, "%s bdcv2 tlv signaling [%x]\n",
 		  drvr->fw_signals ? "enabled" : "disabled", tlv);
 	return 0;
 
@@ -2029,7 +2034,6 @@ bool brcmf_fws_fc_active(struct brcmf_fws_info *fws)
 	if (!fws)
 		return false;
 
-	brcmf_dbg(TRACE, "enter: mode=%d\n", fws->fcmode);
 	return fws->fcmode != BRCMF_FWS_FCMODE_NONE;
 }
 
@@ -2039,7 +2043,7 @@ void brcmf_fws_bustxfail(struct brcmf_fws_info *fws, struct sk_buff *skb)
 	int fifo;
 
 	brcmf_fws_lock(fws->drvr, flags);
-	brcmf_fws_txstatus_process(fws, BRCMF_FWS_TXSTATUS_FW_TOSSED,
+	brcmf_fws_txs_process(fws, BRCMF_FWS_TXSTATUS_FW_TOSSED,
 				   brcmf_skb_htod_tag_get_field(skb, HSLOT), 0);
 	/* the packet never reached firmware so reclaim credit */
 	if (fws->fcmode == BRCMF_FWS_FCMODE_EXPLICIT_CREDIT) {
-- 
cgit v1.2.3


From ce17194ead199bec9f4721bdcffa624d7564845d Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Thu, 6 Jun 2013 13:17:52 +0200
Subject: brcmfmac: On bus flow control use fw signalling or netif.

Currently on a bus flow control both fws is informed and netif queue
gets closed. In case of fw signalling enabled, let the flow control
be handled by fw signalling only.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index 9450d10b0fb9..63cadf63ccfe 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -269,11 +269,14 @@ void brcmf_txflowblock(struct device *dev, bool state)
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	brcmf_fws_bus_blocked(drvr, state);
-
-	for (i = 0; i < BRCMF_MAX_IFS; i++)
-		brcmf_txflowblock_if(drvr->iflist[i],
-				     BRCMF_NETIF_STOP_REASON_BLOCK_BUS, state);
+	if (brcmf_fws_fc_active(drvr->fws)) {
+		brcmf_fws_bus_blocked(drvr, state);
+	} else {
+		for (i = 0; i < BRCMF_MAX_IFS; i++)
+			brcmf_txflowblock_if(drvr->iflist[i],
+					     BRCMF_NETIF_STOP_REASON_BLOCK_BUS,
+					     state);
+	}
 }
 
 void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list)
-- 
cgit v1.2.3


From be4910adf1817d357bfb20d28e0f8b6b0fecd945 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Thu, 6 Jun 2013 13:17:53 +0200
Subject: brcmfmac: For FW signalling it is necessary to track gen bit.

Store gen bit on suppressed packet per entry and use latest
stored version for each packet which gets transmitted to fw.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 92 +++++++---------------
 1 file changed, 29 insertions(+), 63 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index 73e3e1dc073a..682ac62459ea 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -246,7 +246,7 @@ struct brcmf_skbuff_cb {
 #define BRCMF_SKB_HTOD_TAG_HSLOT_MASK			0x00ffff00
 #define BRCMF_SKB_HTOD_TAG_HSLOT_SHIFT			8
 #define BRCMF_SKB_HTOD_TAG_FREERUN_MASK			0x000000ff
-#define BRCMF_SKB_HTOD_TAG_FREERUN_SHIFT			0
+#define BRCMF_SKB_HTOD_TAG_FREERUN_SHIFT		0
 
 #define brcmf_skb_htod_tag_set_field(skb, field, value) \
 	brcmu_maskset32(&(brcmf_skbcb(skb)->htod), \
@@ -384,12 +384,10 @@ enum brcmf_fws_hanger_item_state {
  * struct brcmf_fws_hanger_item - single entry for tx pending packet.
  *
  * @state: entry is either free or occupied.
- * @gen: generation.
  * @pkt: packet itself.
  */
 struct brcmf_fws_hanger_item {
 	enum brcmf_fws_hanger_item_state state;
-	u8 gen;
 	struct sk_buff *pkt;
 };
 
@@ -537,7 +535,7 @@ done:
 }
 
 static int brcmf_fws_hanger_pushpkt(struct brcmf_fws_hanger *h,
-					   struct sk_buff *pkt, u32 slot_id)
+				    struct sk_buff *pkt, u32 slot_id)
 {
 	if (slot_id >= BRCMF_FWS_HANGER_MAXITEMS)
 		return -ENOENT;
@@ -571,20 +569,17 @@ static int brcmf_fws_hanger_poppkt(struct brcmf_fws_hanger *h,
 	if (remove_item) {
 		h->items[slot_id].state = BRCMF_FWS_HANGER_ITEM_STATE_FREE;
 		h->items[slot_id].pkt = NULL;
-		h->items[slot_id].gen = 0xff;
 		h->popped++;
 	}
 	return 0;
 }
 
 static int brcmf_fws_hanger_mark_suppressed(struct brcmf_fws_hanger *h,
-						   u32 slot_id, u8 gen)
+					    u32 slot_id)
 {
 	if (slot_id >= BRCMF_FWS_HANGER_MAXITEMS)
 		return -ENOENT;
 
-	h->items[slot_id].gen = gen;
-
 	if (h->items[slot_id].state != BRCMF_FWS_HANGER_ITEM_STATE_INUSE) {
 		brcmf_err("entry not in use\n");
 		return -EINVAL;
@@ -594,24 +589,6 @@ static int brcmf_fws_hanger_mark_suppressed(struct brcmf_fws_hanger *h,
 	return 0;
 }
 
-static int brcmf_fws_hanger_get_genbit(struct brcmf_fws_hanger *hanger,
-					      struct sk_buff *pkt, u32 slot_id,
-					      int *gen)
-{
-	*gen = 0xff;
-
-	if (slot_id >= BRCMF_FWS_HANGER_MAXITEMS)
-		return -ENOENT;
-
-	if (hanger->items[slot_id].state == BRCMF_FWS_HANGER_ITEM_STATE_FREE) {
-		brcmf_err("slot not in use\n");
-		return -EINVAL;
-	}
-
-	*gen = hanger->items[slot_id].gen;
-	return 0;
-}
-
 static void brcmf_fws_hanger_cleanup(struct brcmf_fws_info *fws,
 				     bool (*fn)(struct sk_buff *, void *),
 				     int ifidx)
@@ -838,9 +815,6 @@ brcmf_fws_flow_control_check(struct brcmf_fws_info *fws, struct pktq *pq,
 	if (WARN_ON(!ifp))
 		return;
 
-	brcmf_dbg(TRACE,
-		  "enter: bssidx=%d, ifidx=%d\n", ifp->bssidx, ifp->ifidx);
-
 	if ((ifp->netif_stop & BRCMF_NETIF_STOP_REASON_FWS_FC) &&
 	    pq->len <= BRCMF_FWS_FLOWCONTROL_LOWATER)
 		brcmf_txflowblock_if(ifp,
@@ -1220,7 +1194,7 @@ static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo,
 	hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT);
 
 	/* this packet was suppressed */
-	if (!entry->suppressed || entry->generation != genbit) {
+	if (!entry->suppressed) {
 		entry->suppressed = true;
 		entry->suppress_count = brcmu_pktq_mlen(&entry->psq,
 							1 << (fifo * 2 + 1));
@@ -1242,8 +1216,7 @@ static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo,
 		 * Mark suppressed to avoid a double free during
 		 * wlfc cleanup
 		 */
-		brcmf_fws_hanger_mark_suppressed(&fws->hanger, hslot,
-						 genbit);
+		brcmf_fws_hanger_mark_suppressed(&fws->hanger, hslot);
 		entry->suppress_count++;
 	}
 
@@ -1573,15 +1546,34 @@ static int brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
 	struct brcmf_skbuff_cb *skcb = brcmf_skbcb(p);
 	struct brcmf_fws_mac_descriptor *entry = skcb->mac;
 	int rc = 0;
-	bool header_needed;
+	bool first_time;
 	int hslot = BRCMF_FWS_HANGER_MAXITEMS;
 	u8 free_ctr;
 	u8 ifidx;
 	u8 flags;
 
-	header_needed = skcb->state != BRCMF_FWS_SKBSTATE_SUPPRESSED;
+	first_time = skcb->state != BRCMF_FWS_SKBSTATE_SUPPRESSED;
 
-	if (header_needed) {
+	if (!first_time) {
+		rc = brcmf_proto_hdrpull(fws->drvr, false, &ifidx, p);
+		if (rc) {
+			brcmf_err("hdrpull failed\n");
+			return rc;
+		}
+	}
+	brcmf_skb_if_flags_set_field(p, TRANSMIT, 1);
+	brcmf_skb_htod_tag_set_field(p, FIFO, fifo);
+	brcmf_skb_htod_tag_set_field(p, GENERATION, entry->generation);
+	flags = BRCMF_FWS_HTOD_FLAG_PKTFROMHOST;
+	if (!(skcb->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK)) {
+		/*
+		 * Indicate that this packet is being sent in response to an
+		 * explicit request from the firmware side.
+		 */
+		flags |= BRCMF_FWS_HTOD_FLAG_PKT_REQUESTED;
+	}
+	brcmf_skb_htod_tag_set_field(p, FLAGS, flags);
+	if (first_time) {
 		/* obtaining free slot may fail, but that will be caught
 		 * by the hanger push. This assures the packet has a BDC
 		 * header upon return.
@@ -1590,40 +1582,14 @@ static int brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
 		free_ctr = entry->seq[fifo];
 		brcmf_skb_htod_tag_set_field(p, HSLOT, hslot);
 		brcmf_skb_htod_tag_set_field(p, FREERUN, free_ctr);
-		brcmf_skb_htod_tag_set_field(p, GENERATION, 1);
 		entry->transit_count++;
 	}
-	brcmf_skb_if_flags_set_field(p, TRANSMIT, 1);
-	brcmf_skb_htod_tag_set_field(p, FIFO, fifo);
 
-	flags = BRCMF_FWS_HTOD_FLAG_PKTFROMHOST;
-	if (!(skcb->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK)) {
-		/*
-		Indicate that this packet is being sent in response to an
-		explicit request from the firmware side.
-		*/
-		flags |= BRCMF_FWS_HTOD_FLAG_PKT_REQUESTED;
-	}
-	brcmf_skb_htod_tag_set_field(p, FLAGS, flags);
-	if (header_needed) {
-		brcmf_fws_hdrpush(fws, p);
+	brcmf_fws_hdrpush(fws, p);
+	if (first_time) {
 		rc = brcmf_fws_hanger_pushpkt(&fws->hanger, p, hslot);
 		if (rc)
 			brcmf_err("hanger push failed: rc=%d\n", rc);
-	} else {
-		int gen;
-
-		/* remove old header */
-		rc = brcmf_proto_hdrpull(fws->drvr, false, &ifidx, p);
-		if (rc == 0) {
-			hslot = brcmf_skb_htod_tag_get_field(p, HSLOT);
-			brcmf_fws_hanger_get_genbit(&fws->hanger, p,
-						    hslot, &gen);
-			brcmf_skb_htod_tag_set_field(p, GENERATION, gen);
-
-			/* push new header */
-			brcmf_fws_hdrpush(fws, p);
-		}
 	}
 
 	return rc;
-- 
cgit v1.2.3


From afc3bbfcd62efe87041571369b2d12beb00f4bc3 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Thu, 6 Jun 2013 13:17:54 +0200
Subject: brcmfmac: Correct creditmap when credit borrowing is active.

When credit borrowing is active the BE credits have been depleted,
however the worker should still be scheduled. In case of credit
borrowing correct credit map to make sure worker remains active.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index 682ac62459ea..abba7f78a6fe 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -1020,6 +1020,8 @@ static void brcmf_fws_return_credits(struct brcmf_fws_info *fws,
 	if (!credits)
 		return;
 
+	fws->fifo_credit_map |= 1 << fifo;
+
 	if ((fifo == BRCMF_FWS_FIFO_AC_BE) &&
 	    (fws->credits_borrowed[0])) {
 		for (lender_ac = BRCMF_FWS_FIFO_AC_VO; lender_ac >= 0;
@@ -1041,7 +1043,6 @@ static void brcmf_fws_return_credits(struct brcmf_fws_info *fws,
 		}
 	}
 
-	fws->fifo_credit_map |= 1 << fifo;
 	fws->fifo_credit[fifo] += credits;
 }
 
@@ -1675,8 +1676,10 @@ static int brcmf_fws_borrow_credit(struct brcmf_fws_info *fws)
 {
 	int lender_ac;
 
-	if (time_after(fws->borrow_defer_timestamp, jiffies))
+	if (time_after(fws->borrow_defer_timestamp, jiffies)) {
+		fws->fifo_credit_map &= ~(1 << BRCMF_FWS_FIFO_AC_BE);
 		return -ENAVAIL;
+	}
 
 	for (lender_ac = 0; lender_ac <= BRCMF_FWS_FIFO_AC_VO; lender_ac++) {
 		if (fws->fifo_credit[lender_ac]) {
@@ -1684,10 +1687,12 @@ static int brcmf_fws_borrow_credit(struct brcmf_fws_info *fws)
 			fws->fifo_credit[lender_ac]--;
 			if (fws->fifo_credit[lender_ac] == 0)
 				fws->fifo_credit_map &= ~(1 << lender_ac);
+			fws->fifo_credit_map |= (1 << BRCMF_FWS_FIFO_AC_BE);
 			brcmf_dbg(DATA, "borrow credit from: %d\n", lender_ac);
 			return 0;
 		}
 	}
+	fws->fifo_credit_map &= ~(1 << BRCMF_FWS_FIFO_AC_BE);
 	return -ENAVAIL;
 }
 
-- 
cgit v1.2.3


From 5cd51c2bad56625e4447739426845cfa37fc11a5 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Thu, 6 Jun 2013 13:17:56 +0200
Subject: brcmfmac: Find correct MAC descriptor in case of TDLS.

In case of TDLS find the correct MAC descriptor for fw signalling
data. In case of TDLS each destination gets its own entry. This
was not handled correctly for P2P client.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index abba7f78a6fe..876ea423048d 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -677,26 +677,21 @@ brcmf_fws_find_mac_desc(struct brcmf_fws_info *fws, struct brcmf_if *ifp,
 {
 	struct brcmf_fws_mac_descriptor *entry = &fws->desc.other;
 	bool multicast;
-	enum nl80211_iftype iftype;
 
 	multicast = is_multicast_ether_addr(da);
-	iftype = brcmf_cfg80211_get_iftype(ifp);
 
-	/* Multicast destination and P2P clients get the interface entry.
-	 * STA gets the interface entry if there is no exact match. For
-	 * example, TDLS destinations have their own entry.
+	/* Multicast destination, STA and P2P clients get the interface entry.
+	 * STA/GC gets the Mac Entry for TDLS destinations, TDLS destinations
+	 * have their own entry.
 	 */
-	entry = NULL;
-	if ((multicast || iftype == NL80211_IFTYPE_STATION ||
-	     iftype == NL80211_IFTYPE_P2P_CLIENT) && ifp->fws_desc)
+	if (multicast && ifp->fws_desc) {
 		entry = ifp->fws_desc;
-
-	if (entry != NULL && iftype != NL80211_IFTYPE_STATION)
 		goto done;
+	}
 
 	entry = brcmf_fws_mac_descriptor_lookup(fws, da);
 	if (IS_ERR(entry))
-		entry = &fws->desc.other;
+		entry = ifp->fws_desc;
 
 done:
 	return entry;
-- 
cgit v1.2.3


From 402e3ba20285f0ebe4f4bebdecb7ab24999f3626 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Thu, 6 Jun 2013 13:17:57 +0200
Subject: brcmfmac: fix invalid ifp lookup in firmware-signalling

The destination entries for firmware-signalled flow control have
the interface id stored. This needs to be translated to bsscfg
index when looking up the ifp object for the interface.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index 876ea423048d..5f3874288d6b 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -805,7 +805,7 @@ static void
 brcmf_fws_flow_control_check(struct brcmf_fws_info *fws, struct pktq *pq,
 			     u8 if_id)
 {
-	struct brcmf_if *ifp = fws->drvr->iflist[if_id];
+	struct brcmf_if *ifp = fws->drvr->iflist[!if_id ? 0 : if_id + 1];
 
 	if (WARN_ON(!ifp))
 		return;
-- 
cgit v1.2.3


From 0d24b0eade7d4b6a5d06fe02645449b1fd0f8e17 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Thu, 6 Jun 2013 13:17:58 +0200
Subject: brcmfmac: Accept only first creditmap event.

During P2P testing it turned out that the firmware sents multiple
multiple creditmap event messages. Only the first message from the
firmware should be processed. Otherwise the firmware-signalled flow
control can run haywire when it has packets outstanding in firmware.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index 5f3874288d6b..bba4ff04ee19 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -434,6 +434,7 @@ struct brcmf_fws_info {
 	u32 fifo_delay_map;
 	unsigned long borrow_defer_timestamp;
 	bool bus_flow_blocked;
+	bool creditmap_received;
 };
 
 /*
@@ -1356,6 +1357,10 @@ static int brcmf_fws_notify_credit_map(struct brcmf_if *ifp,
 		brcmf_err("event payload too small (%d)\n", e->datalen);
 		return -EINVAL;
 	}
+	if (fws->creditmap_received)
+		return 0;
+
+	fws->creditmap_received = true;
 
 	brcmf_dbg(TRACE, "enter: credits %pM\n", credits);
 	brcmf_fws_lock(ifp->drvr, flags);
-- 
cgit v1.2.3


From 2747e5f7f83d215cbc9bdb66f69411ff3dedeeee Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Thu, 6 Jun 2013 13:17:59 +0200
Subject: brcmfmac: Signalling header push and pull on logic places.

Currently suppressed packets get enque-ed with header which
then gets pulled before transmit. It is more logical and clean
to pull the header on return and push it unconditionally on xmit.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 42 +++++++---------------
 1 file changed, 13 insertions(+), 29 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index bba4ff04ee19..6255312d5986 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -1187,6 +1187,7 @@ static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo,
 	struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac;
 	u32 hslot;
 	int ret;
+	u8 ifidx;
 
 	hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT);
 
@@ -1203,9 +1204,12 @@ static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo,
 
 	entry->generation = genbit;
 
-	ret = brcmf_fws_enq(fws, BRCMF_FWS_SKBSTATE_SUPPRESSED, fifo, skb);
+	ret = brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb);
+	if (ret == 0)
+		ret = brcmf_fws_enq(fws, BRCMF_FWS_SKBSTATE_SUPPRESSED, fifo,
+				    skb);
 	if (ret != 0) {
-		/* suppress q is full, drop this packet */
+		/* suppress q is full or hdrpull failed, drop this packet */
 		brcmf_fws_hanger_poppkt(&fws->hanger, hslot, &skb,
 					true);
 	} else {
@@ -1550,18 +1554,10 @@ static int brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
 	bool first_time;
 	int hslot = BRCMF_FWS_HANGER_MAXITEMS;
 	u8 free_ctr;
-	u8 ifidx;
 	u8 flags;
 
 	first_time = skcb->state != BRCMF_FWS_SKBSTATE_SUPPRESSED;
 
-	if (!first_time) {
-		rc = brcmf_proto_hdrpull(fws->drvr, false, &ifidx, p);
-		if (rc) {
-			brcmf_err("hdrpull failed\n");
-			return rc;
-		}
-	}
 	brcmf_skb_if_flags_set_field(p, TRANSMIT, 1);
 	brcmf_skb_htod_tag_set_field(p, FIFO, fifo);
 	brcmf_skb_htod_tag_set_field(p, GENERATION, entry->generation);
@@ -1584,15 +1580,14 @@ static int brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
 		brcmf_skb_htod_tag_set_field(p, HSLOT, hslot);
 		brcmf_skb_htod_tag_set_field(p, FREERUN, free_ctr);
 		entry->transit_count++;
-	}
-
-	brcmf_fws_hdrpush(fws, p);
-	if (first_time) {
 		rc = brcmf_fws_hanger_pushpkt(&fws->hanger, p, hslot);
 		if (rc)
 			brcmf_err("hanger push failed: rc=%d\n", rc);
 	}
 
+	if (rc == 0)
+		brcmf_fws_hdrpush(fws, p);
+
 	return rc;
 }
 
@@ -1613,7 +1608,6 @@ brcmf_fws_rollback_toq(struct brcmf_fws_info *fws,
 	struct sk_buff *pktout;
 	int rc = 0;
 	int hslot;
-	u8 ifidx;
 
 	state = brcmf_skbcb(skb)->state;
 	entry = brcmf_skbcb(skb)->mac;
@@ -1630,17 +1624,6 @@ brcmf_fws_rollback_toq(struct brcmf_fws_info *fws,
 		} else {
 			hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT);
 
-			/* remove header first */
-			rc = brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb);
-			if (rc) {
-				brcmf_err("header removal failed\n");
-				/* free the hanger slot */
-				brcmf_fws_hanger_poppkt(&fws->hanger, hslot,
-							&pktout, true);
-				rc = -EINVAL;
-				goto fail;
-			}
-
 			/* delay-q packets are going to delay-q */
 			pktout = brcmu_pktq_penq_head(&entry->psq,
 						      2 * fifo, skb);
@@ -1661,8 +1644,6 @@ brcmf_fws_rollback_toq(struct brcmf_fws_info *fws,
 		rc = -ENOENT;
 	}
 
-
-fail:
 	if (rc) {
 		brcmf_fws_bustxfail(fws, skb);
 		fws->stats.rollback_failed++;
@@ -1732,6 +1713,7 @@ static int brcmf_fws_commit_skb(struct brcmf_fws_info *fws, int fifo,
 	struct brcmf_fws_mac_descriptor *entry;
 	struct brcmf_bus *bus = fws->drvr->bus_if;
 	int rc;
+	u8 ifidx;
 
 	entry = skcb->mac;
 	if (IS_ERR(entry))
@@ -1746,8 +1728,10 @@ static int brcmf_fws_commit_skb(struct brcmf_fws_info *fws, int fifo,
 	brcmf_dbg(DATA, "%s flags %X htod %X\n", entry->name, skcb->if_flags,
 		  skcb->htod);
 	rc = brcmf_bus_txdata(bus, skb);
-	if (rc < 0)
+	if (rc < 0) {
+		brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb);
 		goto rollback;
+	}
 
 	entry->seq[fifo]++;
 	fws->stats.pkt2bus++;
-- 
cgit v1.2.3


From eb2410cdd92e5232e6b7e8d95cb60b9e0cea434d Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Thu, 6 Jun 2013 13:18:00 +0200
Subject: brcmfmac: Fix endless loop when brcmf_fws_commit_skb fails.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index 6255312d5986..881c0b2f7412 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -1879,7 +1879,8 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker)
 					brcmf_fws_return_credits(fws, fifo, 1);
 					break;
 				}
-				brcmf_fws_commit_skb(fws, fifo, skb);
+				if (brcmf_fws_commit_skb(fws, fifo, skb))
+					break;
 				if (fws->bus_flow_blocked)
 					break;
 			}
-- 
cgit v1.2.3


From 8c5140f63a7aa01e6836fc9eace201b0a3f1475f Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Thu, 6 Jun 2013 13:18:01 +0200
Subject: brcmfmac: Simplify counting transit count.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 31 +++++++++-------------
 1 file changed, 12 insertions(+), 19 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index 881c0b2f7412..dc40eec8a5cc 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -357,7 +357,6 @@ struct brcmf_fws_mac_descriptor {
 	u8 seq[BRCMF_FWS_FIFO_COUNT];
 	struct pktq psq;
 	int transit_count;
-	int suppress_count;
 	int suppr_transit_count;
 	bool send_tim_signal;
 	u8 traffic_pending_bmp;
@@ -1100,8 +1099,6 @@ static int brcmf_fws_enq(struct brcmf_fws_info *fws,
 
 	/* update the sk_buff state */
 	brcmf_skbcb(p)->state = state;
-	if (state == BRCMF_FWS_SKBSTATE_SUPPRESSED)
-		entry->suppress_count++;
 
 	/*
 	 * A packet has been pushed so update traffic
@@ -1141,9 +1138,8 @@ static struct sk_buff *brcmf_fws_deq(struct brcmf_fws_info *fws, int fifo)
 		p = brcmu_pktq_mdeq(&entry->psq, pmsk << (fifo * 2), &prec_out);
 		if (p == NULL) {
 			if (entry->suppressed) {
-				if (entry->suppr_transit_count >
-				    entry->suppress_count)
-					return NULL;
+				if (entry->suppr_transit_count)
+					continue;
 				entry->suppressed = false;
 				p = brcmu_pktq_mdeq(&entry->psq,
 						    1 << (fifo * 2), &prec_out);
@@ -1194,12 +1190,9 @@ static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo,
 	/* this packet was suppressed */
 	if (!entry->suppressed) {
 		entry->suppressed = true;
-		entry->suppress_count = brcmu_pktq_mlen(&entry->psq,
-							1 << (fifo * 2 + 1));
 		entry->suppr_transit_count = entry->transit_count;
-		brcmf_dbg(DATA, "suppress %s: supp_cnt %d transit %d\n",
-			  entry->name, entry->suppress_count,
-			  entry->transit_count);
+		brcmf_dbg(DATA, "suppress %s: transit %d\n",
+			  entry->name, entry->transit_count);
 	}
 
 	entry->generation = genbit;
@@ -1218,7 +1211,6 @@ static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo,
 		 * wlfc cleanup
 		 */
 		brcmf_fws_hanger_mark_suppressed(&fws->hanger, hslot);
-		entry->suppress_count++;
 	}
 
 	return ret;
@@ -1263,6 +1255,9 @@ brcmf_fws_txs_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot,
 		brcmu_pkt_buf_free_skb(skb);
 		return -EINVAL;
 	}
+	entry->transit_count--;
+	if (entry->suppressed && entry->suppr_transit_count)
+		entry->suppr_transit_count--;
 
 	brcmf_dbg(DATA, "%s flags %X htod %X\n", entry->name, skcb->if_flags,
 		  skcb->htod);
@@ -1276,13 +1271,9 @@ brcmf_fws_txs_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot,
 	if (!remove_from_hanger)
 		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, genbit);
 
-	if (remove_from_hanger || ret) {
-		entry->transit_count--;
-		if (entry->suppressed)
-			entry->suppr_transit_count--;
-
+	if (remove_from_hanger || ret)
 		brcmf_txfinalize(fws->drvr, skb, true);
-	}
+
 	return 0;
 }
 
@@ -1579,7 +1570,6 @@ static int brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
 		free_ctr = entry->seq[fifo];
 		brcmf_skb_htod_tag_set_field(p, HSLOT, hslot);
 		brcmf_skb_htod_tag_set_field(p, FREERUN, free_ctr);
-		entry->transit_count++;
 		rc = brcmf_fws_hanger_pushpkt(&fws->hanger, p, hslot);
 		if (rc)
 			brcmf_err("hanger push failed: rc=%d\n", rc);
@@ -1733,6 +1723,9 @@ static int brcmf_fws_commit_skb(struct brcmf_fws_info *fws, int fifo,
 		goto rollback;
 	}
 
+	entry->transit_count++;
+	if (entry->suppressed)
+		entry->suppr_transit_count++;
 	entry->seq[fifo]++;
 	fws->stats.pkt2bus++;
 	if (brcmf_skbcb(skb)->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK) {
-- 
cgit v1.2.3


From cf3a6872b981037e29517b3e61e199bde14abc65 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 6 Jun 2013 13:18:02 +0200
Subject: brcmfmac: fix send_pkts statistic counter in firmware-signalling

The statistic counter send_pkts was wrongly counted conditionally.
Correcting the mistake.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index dc40eec8a5cc..04aa4b286611 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -1728,10 +1728,9 @@ static int brcmf_fws_commit_skb(struct brcmf_fws_info *fws, int fifo,
 		entry->suppr_transit_count++;
 	entry->seq[fifo]++;
 	fws->stats.pkt2bus++;
-	if (brcmf_skbcb(skb)->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK) {
-		fws->stats.send_pkts[fifo]++;
+	fws->stats.send_pkts[fifo]++;
+	if (brcmf_skbcb(skb)->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK)
 		fws->stats.fifo_credits_sent[fifo]++;
-	}
 
 	return rc;
 
-- 
cgit v1.2.3


From ea0737d6e24b44b632e9094108bb987b0338ea74 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 6 Jun 2013 13:18:05 +0200
Subject: brcmfmac: add trace event for capturing BDC header

The BDC header contains PropTx TLV signals that are useful to capture
for debugging. This event captures the header and tlv's in binary
form. This can be post-processed using trace-cmd plugin.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c   |  3 +++
 .../net/wireless/brcm80211/brcmfmac/tracepoint.h    | 21 +++++++++++++++++++++
 2 files changed, 24 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c
index 59c77aa3b959..dd85401063cb 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c
@@ -30,6 +30,7 @@
 #include "dhd_bus.h"
 #include "fwsignal.h"
 #include "dhd_dbg.h"
+#include "tracepoint.h"
 
 struct brcmf_proto_cdc_dcmd {
 	__le32 cmd;	/* dongle command value */
@@ -292,6 +293,7 @@ void brcmf_proto_hdrpush(struct brcmf_pub *drvr, int ifidx, u8 offset,
 	h->flags2 = 0;
 	h->data_offset = offset;
 	BDC_SET_IF_IDX(h, ifidx);
+	trace_brcmf_bdchdr(pktbuf->data);
 }
 
 int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,
@@ -309,6 +311,7 @@ int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,
 		return -EBADE;
 	}
 
+	trace_brcmf_bdchdr(pktbuf->data);
 	h = (struct brcmf_proto_bdc_header *)(pktbuf->data);
 
 	*ifidx = BDC_GET_IF_IDX(h);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/tracepoint.h b/drivers/net/wireless/brcm80211/brcmfmac/tracepoint.h
index 9df1f7a681e0..bc2917112899 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/tracepoint.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/tracepoint.h
@@ -87,6 +87,27 @@ TRACE_EVENT(brcmf_hexdump,
 	TP_printk("hexdump [length=%lu]", __entry->len)
 );
 
+TRACE_EVENT(brcmf_bdchdr,
+	TP_PROTO(void *data),
+	TP_ARGS(data),
+	TP_STRUCT__entry(
+		__field(u8, flags)
+		__field(u8, prio)
+		__field(u8, flags2)
+		__field(u32, siglen)
+		__dynamic_array(u8, signal, *((u8 *)data + 3) * 4)
+	),
+	TP_fast_assign(
+		__entry->flags = *(u8 *)data;
+		__entry->prio = *((u8 *)data + 1);
+		__entry->flags2 = *((u8 *)data + 2);
+		__entry->siglen = *((u8 *)data + 3) * 4;
+		memcpy(__get_dynamic_array(signal),
+		       (u8 *)data + 4, __entry->siglen);
+	),
+	TP_printk("bdc: prio=%d siglen=%d", __entry->prio, __entry->siglen)
+);
+
 #ifdef CONFIG_BRCM_TRACING
 
 #undef TRACE_INCLUDE_PATH
-- 
cgit v1.2.3


From 672774f124dd07b2aaa1c8fdd56d98d786434fbb Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 6 Jun 2013 13:18:06 +0200
Subject: brcmfmac: increment hard_header_len instead of overriding

In brcmf_net_attach() the hard_header_len is set to sum of ETH_HLEN
and the headroom needed by the bus interface. Better use increment
instead as hard_header_len is already initialized upon alloc_netdev().

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index 63cadf63ccfe..29828865ed69 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -640,7 +640,7 @@ int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked)
 	/* set appropriate operations */
 	ndev->netdev_ops = &brcmf_netdev_ops_pri;
 
-	ndev->hard_header_len = ETH_HLEN + drvr->hdrlen;
+	ndev->hard_header_len += drvr->hdrlen;
 	ndev->ethtool_ops = &brcmf_ethtool_ops;
 
 	drvr->rxsz = ndev->mtu + ndev->hard_header_len +
-- 
cgit v1.2.3


From c7773fc1ef55b7d1ed44a27900b86dc28351dec4 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 6 Jun 2013 13:49:32 +0200
Subject: brcmfmac: Sent TIM information in case of data available.

When data is available and fw signalling is enabled then TIM
information should be sent to firmware. If it can piggy back
on existing packet then do that otherwise create dummy packet
to get information out.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 167 +++++++++++++--------
 1 file changed, 103 insertions(+), 64 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index 04aa4b286611..ff920601898c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -157,11 +157,13 @@ static const char *brcmf_fws_get_tlv_name(enum brcmf_fws_tlv_type id)
  * @BRCMF_FWS_SKBSTATE_NEW: sk_buff is newly arrived in the driver.
  * @BRCMF_FWS_SKBSTATE_DELAYED: sk_buff had to wait on queue.
  * @BRCMF_FWS_SKBSTATE_SUPPRESSED: sk_buff has been suppressed by firmware.
+ * @BRCMF_FWS_SKBSTATE_TIM: allocated for TIM update info.
  */
 enum brcmf_fws_skb_state {
 	BRCMF_FWS_SKBSTATE_NEW,
 	BRCMF_FWS_SKBSTATE_DELAYED,
-	BRCMF_FWS_SKBSTATE_SUPPRESSED
+	BRCMF_FWS_SKBSTATE_SUPPRESSED,
+	BRCMF_FWS_SKBSTATE_TIM
 };
 
 /**
@@ -278,6 +280,7 @@ struct brcmf_skbuff_cb {
 /**
  * enum brcmf_fws_fifo - fifo indices used by dongle firmware.
  *
+ * @BRCMF_FWS_FIFO_FIRST: first fifo, ie. background.
  * @BRCMF_FWS_FIFO_AC_BK: fifo for background traffic.
  * @BRCMF_FWS_FIFO_AC_BE: fifo for best-effort traffic.
  * @BRCMF_FWS_FIFO_AC_VI: fifo for video traffic.
@@ -287,7 +290,8 @@ struct brcmf_skbuff_cb {
  * @BRCMF_FWS_FIFO_COUNT: number of fifos.
  */
 enum brcmf_fws_fifo {
-	BRCMF_FWS_FIFO_AC_BK,
+	BRCMF_FWS_FIFO_FIRST,
+	BRCMF_FWS_FIFO_AC_BK = BRCMF_FWS_FIFO_FIRST,
 	BRCMF_FWS_FIFO_AC_BE,
 	BRCMF_FWS_FIFO_AC_VI,
 	BRCMF_FWS_FIFO_AC_VO,
@@ -783,22 +787,95 @@ static void brcmf_fws_cleanup(struct brcmf_fws_info *fws, int ifidx)
 	brcmf_fws_hanger_cleanup(fws, matchfn, ifidx);
 }
 
-static void brcmf_fws_tim_update(struct brcmf_fws_info *ctx,
-				 struct brcmf_fws_mac_descriptor *entry,
-				 int prec)
+static int brcmf_fws_hdrpush(struct brcmf_fws_info *fws, struct sk_buff *skb)
 {
-	if (entry->state == BRCMF_FWS_STATE_CLOSE) {
-		/* check delayedQ and suppressQ in one call using bitmap */
-		if (brcmu_pktq_mlen(&entry->psq, 3 << (prec * 2)) == 0)
-			entry->traffic_pending_bmp =
-				entry->traffic_pending_bmp & ~NBITVAL(prec);
-		else
-			entry->traffic_pending_bmp =
-				entry->traffic_pending_bmp | NBITVAL(prec);
+	struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac;
+	u8 *wlh;
+	u16 data_offset = 0;
+	u8 fillers;
+	__le32 pkttag = cpu_to_le32(brcmf_skbcb(skb)->htod);
+
+	brcmf_dbg(TRACE, "enter: ea=%pM, ifidx=%u (%u), pkttag=0x%08X, hslot=%d\n",
+		  entry->ea, entry->interface_id,
+		  brcmf_skb_if_flags_get_field(skb, INDEX),
+		  le32_to_cpu(pkttag), (le32_to_cpu(pkttag) >> 8) & 0xffff);
+	if (entry->send_tim_signal)
+		data_offset += 2 + BRCMF_FWS_TYPE_PENDING_TRAFFIC_BMP_LEN;
+
+	/* +2 is for Type[1] and Len[1] in TLV, plus TIM signal */
+	data_offset += 2 + BRCMF_FWS_TYPE_PKTTAG_LEN;
+	fillers = round_up(data_offset, 4) - data_offset;
+	data_offset += fillers;
+
+	skb_push(skb, data_offset);
+	wlh = skb->data;
+
+	wlh[0] = BRCMF_FWS_TYPE_PKTTAG;
+	wlh[1] = BRCMF_FWS_TYPE_PKTTAG_LEN;
+	memcpy(&wlh[2], &pkttag, sizeof(pkttag));
+	wlh += BRCMF_FWS_TYPE_PKTTAG_LEN + 2;
+
+	if (entry->send_tim_signal) {
+		entry->send_tim_signal = 0;
+		wlh[0] = BRCMF_FWS_TYPE_PENDING_TRAFFIC_BMP;
+		wlh[1] = BRCMF_FWS_TYPE_PENDING_TRAFFIC_BMP_LEN;
+		wlh[2] = entry->mac_handle;
+		wlh[3] = entry->traffic_pending_bmp;
+		brcmf_dbg(TRACE, "adding TIM info: %02X:%02X:%02X:%02X\n",
+			  wlh[0], wlh[1], wlh[2], wlh[3]);
+		wlh += BRCMF_FWS_TYPE_PENDING_TRAFFIC_BMP_LEN + 2;
+		entry->traffic_lastreported_bmp = entry->traffic_pending_bmp;
 	}
-	/* request a TIM update to firmware at the next piggyback opportunity */
+	if (fillers)
+		memset(wlh, BRCMF_FWS_TYPE_FILLER, fillers);
+
+	brcmf_proto_hdrpush(fws->drvr, brcmf_skb_if_flags_get_field(skb, INDEX),
+			    data_offset >> 2, skb);
+	return 0;
+}
+
+static bool brcmf_fws_tim_update(struct brcmf_fws_info *fws,
+				 struct brcmf_fws_mac_descriptor *entry,
+				 int prec, bool send_immediately)
+{
+	struct sk_buff *skb;
+	struct brcmf_bus *bus;
+	struct brcmf_skbuff_cb *skcb;
+	s32 err;
+	u32 len;
+
+	/* check delayedQ and suppressQ in one call using bitmap */
+	if (brcmu_pktq_mlen(&entry->psq, 3 << (prec * 2)) == 0)
+		entry->traffic_pending_bmp &= ~NBITVAL(prec);
+	else
+		entry->traffic_pending_bmp |= NBITVAL(prec);
+
+	entry->send_tim_signal = false;
 	if (entry->traffic_lastreported_bmp != entry->traffic_pending_bmp)
 		entry->send_tim_signal = true;
+	if (send_immediately && entry->send_tim_signal &&
+	    entry->state == BRCMF_FWS_STATE_CLOSE) {
+		/* create a dummy packet and sent that. The traffic          */
+		/* bitmap info will automatically be attached to that packet */
+		len = BRCMF_FWS_TYPE_PKTTAG_LEN + 2 +
+		      BRCMF_FWS_TYPE_PENDING_TRAFFIC_BMP_LEN + 2 +
+		      4 + fws->drvr->hdrlen;
+		skb = brcmu_pkt_buf_get_skb(len);
+		if (skb == NULL)
+			return false;
+		skb_pull(skb, len);
+		skcb = brcmf_skbcb(skb);
+		skcb->mac = entry;
+		skcb->state = BRCMF_FWS_SKBSTATE_TIM;
+		bus = fws->drvr->bus_if;
+		err = brcmf_fws_hdrpush(fws, skb);
+		if (err == 0)
+			err = brcmf_bus_txdata(bus, skb);
+		if (err)
+			brcmu_pkt_buf_free_skb(skb);
+		return true;
+	}
+	return false;
 }
 
 static void
@@ -886,7 +963,6 @@ static int brcmf_fws_macdesc_state_indicate(struct brcmf_fws_info *fws,
 {
 	struct brcmf_fws_mac_descriptor *entry;
 	u8 mac_handle;
-	int i;
 
 	mac_handle = data[0];
 	entry = &fws->desc.nodes[mac_handle & 0x1F];
@@ -894,18 +970,18 @@ static int brcmf_fws_macdesc_state_indicate(struct brcmf_fws_info *fws,
 		fws->stats.mac_ps_update_failed++;
 		return -ESRCH;
 	}
-
-	brcmf_dbg(TRACE, "%s (%d): %s\n", brcmf_fws_get_tlv_name(type), type,
-		  entry->name);
-	/* a state update should wipe old credits? */
+	/* a state update should wipe old credits */
 	entry->requested_credit = 0;
+	entry->requested_packet = 0;
 	if (type == BRCMF_FWS_TYPE_MAC_OPEN) {
 		entry->state = BRCMF_FWS_STATE_OPEN;
 		return BRCMF_FWS_RET_OK_SCHEDULE;
 	} else {
 		entry->state = BRCMF_FWS_STATE_CLOSE;
-		for (i = BRCMF_FWS_FIFO_AC_BE; i < NL80211_NUM_ACS; i++)
-			brcmf_fws_tim_update(fws, entry, i);
+		brcmf_fws_tim_update(fws, entry, BRCMF_FWS_FIFO_AC_BK, false);
+		brcmf_fws_tim_update(fws, entry, BRCMF_FWS_FIFO_AC_BE, false);
+		brcmf_fws_tim_update(fws, entry, BRCMF_FWS_FIFO_AC_VI, false);
+		brcmf_fws_tim_update(fws, entry, BRCMF_FWS_FIFO_AC_VO, true);
 	}
 	return BRCMF_FWS_RET_OK_NOSCHEDULE;
 }
@@ -1104,7 +1180,7 @@ static int brcmf_fws_enq(struct brcmf_fws_info *fws,
 	 * A packet has been pushed so update traffic
 	 * availability bitmap, if applicable
 	 */
-	brcmf_fws_tim_update(fws, entry, fifo);
+	brcmf_fws_tim_update(fws, entry, fifo, true);
 	brcmf_fws_flow_control_check(fws, &entry->psq,
 				     brcmf_skb_if_flags_get_field(p, INDEX));
 	return 0;
@@ -1160,7 +1236,7 @@ static struct sk_buff *brcmf_fws_deq(struct brcmf_fws_info *fws, int fifo)
 		 * A packet has been picked up, update traffic
 		 * availability bitmap, if applicable
 		 */
-		brcmf_fws_tim_update(fws, entry, fifo);
+		brcmf_fws_tim_update(fws, entry, fifo, false);
 
 		/*
 		 * decrement total enqueued fifo packets and
@@ -1495,47 +1571,6 @@ int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len,
 	return 0;
 }
 
-static int brcmf_fws_hdrpush(struct brcmf_fws_info *fws, struct sk_buff *skb)
-{
-	struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac;
-	u8 *wlh;
-	u16 data_offset = 0;
-	u8 fillers;
-	__le32 pkttag = cpu_to_le32(brcmf_skbcb(skb)->htod);
-
-	if (entry->send_tim_signal)
-		data_offset += 2 + BRCMF_FWS_TYPE_PENDING_TRAFFIC_BMP_LEN;
-
-	/* +2 is for Type[1] and Len[1] in TLV, plus TIM signal */
-	data_offset += 2 + BRCMF_FWS_TYPE_PKTTAG_LEN;
-	fillers = round_up(data_offset, 4) - data_offset;
-	data_offset += fillers;
-
-	skb_push(skb, data_offset);
-	wlh = skb->data;
-
-	wlh[0] = BRCMF_FWS_TYPE_PKTTAG;
-	wlh[1] = BRCMF_FWS_TYPE_PKTTAG_LEN;
-	memcpy(&wlh[2], &pkttag, sizeof(pkttag));
-	wlh += BRCMF_FWS_TYPE_PKTTAG_LEN + 2;
-
-	if (entry->send_tim_signal) {
-		entry->send_tim_signal = 0;
-		wlh[0] = BRCMF_FWS_TYPE_PENDING_TRAFFIC_BMP;
-		wlh[1] = BRCMF_FWS_TYPE_PENDING_TRAFFIC_BMP_LEN;
-		wlh[2] = entry->mac_handle;
-		wlh[3] = entry->traffic_pending_bmp;
-		wlh += BRCMF_FWS_TYPE_PENDING_TRAFFIC_BMP_LEN + 2;
-		entry->traffic_lastreported_bmp = entry->traffic_pending_bmp;
-	}
-	if (fillers)
-		memset(wlh, BRCMF_FWS_TYPE_FILLER, fillers);
-
-	brcmf_proto_hdrpush(fws->drvr, brcmf_skb_if_flags_get_field(skb, INDEX),
-			    data_offset >> 2, skb);
-	return 0;
-}
-
 static int brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
 				   struct sk_buff *p)
 {
@@ -1990,6 +2025,10 @@ void brcmf_fws_bustxfail(struct brcmf_fws_info *fws, struct sk_buff *skb)
 	ulong flags;
 	int fifo;
 
+	if (brcmf_skbcb(skb)->state == BRCMF_FWS_SKBSTATE_TIM) {
+		brcmu_pkt_buf_free_skb(skb);
+		return;
+	}
 	brcmf_fws_lock(fws->drvr, flags);
 	brcmf_fws_txs_process(fws, BRCMF_FWS_TXSTATUS_FW_TOSSED,
 				   brcmf_skb_htod_tag_get_field(skb, HSLOT), 0);
-- 
cgit v1.2.3


From ee06fcad742ab52a1ba67ba734fee6a98af51621 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Fri, 7 Jun 2013 11:03:00 +0200
Subject: brcmfmac: free primary net_device when brcmf_bus_start() fails

When initialization within brcmf_bus_start() fails on steps
before the brcmf_net_attach() the net_device for the primary
interface needs to be freed.

This patch resolves a panic during kernel boot as reported
by Stephen Warren.

ref.: http://mid.gmane.org/51AD1F22.2080004@wwwdotorg.org

Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index 29828865ed69..8c402e7b97eb 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -941,6 +941,10 @@ fail:
 			brcmf_fws_del_interface(ifp);
 			brcmf_fws_deinit(drvr);
 		}
+		if (drvr->iflist[0]) {
+			free_netdev(ifp->ndev);
+			drvr->iflist[0] = NULL;
+		}
 		if (p2p_ifp) {
 			free_netdev(p2p_ifp->ndev);
 			drvr->iflist[1] = NULL;
-- 
cgit v1.2.3


From f2c7a793374be88eb680a5dfcf400b4cd97f29d4 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 7 Jun 2013 18:12:00 +0200
Subject: ath9k: add support for IEEE80211_TX_CTL_PS_RESPONSE

Use the UAPSD hardware queue to get PS-Poll responses out as fast as
possible and without backoff.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  1 +
 drivers/net/wireless/ath/ath9k/init.c  |  2 ++
 drivers/net/wireless/ath/ath9k/xmit.c  | 43 +++++++++++++++++++++-------------
 3 files changed, 30 insertions(+), 16 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 18fcee4e9d68..4f798276802c 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -296,6 +296,7 @@ struct ath_tx {
 	struct ath_txq txq[ATH9K_NUM_TX_QUEUES];
 	struct ath_descdma txdma;
 	struct ath_txq *txq_map[IEEE80211_NUM_ACS];
+	struct ath_txq *uapsdq;
 	u32 txq_max_pending[IEEE80211_NUM_ACS];
 	u16 max_aggr_framelen[IEEE80211_NUM_ACS][4][32];
 };
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 389ee1b59976..d65ee6e6437b 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -432,6 +432,8 @@ static int ath9k_init_queues(struct ath_softc *sc)
 	sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
 	ath_cabq_update(sc);
 
+	sc->tx.uapsdq = ath_txq_setup(sc, ATH9K_TX_QUEUE_UAPSD, 0);
+
 	for (i = 0; i < IEEE80211_NUM_ACS; i++) {
 		sc->tx.txq_map[i] = ath_txq_setup(sc, ATH9K_TX_QUEUE_DATA, i);
 		sc->tx.txq_map[i]->mac80211_qnum = i;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 1c9b1bac8b0d..3931bd82629d 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1681,8 +1681,9 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
 	}
 }
 
-static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_atx_tid *tid,
-			      struct sk_buff *skb, struct ath_tx_control *txctl)
+static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_txq *txq,
+			      struct ath_atx_tid *tid, struct sk_buff *skb,
+			      struct ath_tx_control *txctl)
 {
 	struct ath_frame_info *fi = get_frame_info(skb);
 	struct list_head bf_head;
@@ -1695,21 +1696,22 @@ static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_atx_tid *tid,
 	 * - seqno is not within block-ack window
 	 * - h/w queue depth exceeds low water mark
 	 */
-	if (!skb_queue_empty(&tid->buf_q) || tid->paused ||
-	    !BAW_WITHIN(tid->seq_start, tid->baw_size, tid->seq_next) ||
-	    txctl->txq->axq_ampdu_depth >= ATH_AGGR_MIN_QDEPTH) {
+	if ((!skb_queue_empty(&tid->buf_q) || tid->paused ||
+	     !BAW_WITHIN(tid->seq_start, tid->baw_size, tid->seq_next) ||
+	     txq->axq_ampdu_depth >= ATH_AGGR_MIN_QDEPTH) &&
+	    txq != sc->tx.uapsdq) {
 		/*
 		 * Add this frame to software queue for scheduling later
 		 * for aggregation.
 		 */
-		TX_STAT_INC(txctl->txq->axq_qnum, a_queued_sw);
+		TX_STAT_INC(txq->axq_qnum, a_queued_sw);
 		__skb_queue_tail(&tid->buf_q, skb);
 		if (!txctl->an || !txctl->an->sleeping)
-			ath_tx_queue_tid(txctl->txq, tid);
+			ath_tx_queue_tid(txq, tid);
 		return;
 	}
 
-	bf = ath_tx_setup_buffer(sc, txctl->txq, tid, skb);
+	bf = ath_tx_setup_buffer(sc, txq, tid, skb);
 	if (!bf) {
 		ieee80211_free_txskb(sc->hw, skb);
 		return;
@@ -1724,10 +1726,10 @@ static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_atx_tid *tid,
 	ath_tx_addto_baw(sc, tid, bf->bf_state.seqno);
 
 	/* Queue to h/w without aggregation */
-	TX_STAT_INC(txctl->txq->axq_qnum, a_queued_hw);
+	TX_STAT_INC(txq->axq_qnum, a_queued_hw);
 	bf->bf_lastbf = bf;
-	ath_tx_fill_desc(sc, bf, txctl->txq, fi->framelen);
-	ath_tx_txqaddbuf(sc, txctl->txq, &bf_head, false);
+	ath_tx_fill_desc(sc, bf, txq, fi->framelen);
+	ath_tx_txqaddbuf(sc, txq, &bf_head, false);
 }
 
 static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq,
@@ -1935,6 +1937,12 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
 		txq->stopped = true;
 	}
 
+	if (info->flags & IEEE80211_TX_CTL_PS_RESPONSE) {
+		ath_txq_unlock(sc, txq);
+		txq = sc->tx.uapsdq;
+		ath_txq_lock(sc, txq);
+	}
+
 	if (txctl->an && ieee80211_is_data_qos(hdr->frame_control)) {
 		tidno = ieee80211_get_qos_ctl(hdr)[0] &
 			IEEE80211_QOS_CTL_TID_MASK;
@@ -1948,11 +1956,11 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
 		 * Try aggregation if it's a unicast data frame
 		 * and the destination is HT capable.
 		 */
-		ath_tx_send_ampdu(sc, tid, skb, txctl);
+		ath_tx_send_ampdu(sc, txq, tid, skb, txctl);
 		goto out;
 	}
 
-	bf = ath_tx_setup_buffer(sc, txctl->txq, tid, skb);
+	bf = ath_tx_setup_buffer(sc, txq, tid, skb);
 	if (!bf) {
 		if (txctl->paprd)
 			dev_kfree_skb_any(skb);
@@ -1967,7 +1975,7 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
 		bf->bf_state.bfs_paprd_timestamp = jiffies;
 
 	ath_set_rates(vif, sta, bf);
-	ath_tx_send_normal(sc, txctl->txq, tid, skb);
+	ath_tx_send_normal(sc, txq, tid, skb);
 
 out:
 	ath_txq_unlock(sc, txq);
@@ -2020,7 +2028,12 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 	}
 	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
 
+	__skb_queue_tail(&txq->complete_q, skb);
+
 	q = skb_get_queue_mapping(skb);
+	if (txq == sc->tx.uapsdq)
+		txq = sc->tx.txq_map[q];
+
 	if (txq == sc->tx.txq_map[q]) {
 		if (WARN_ON(--txq->pending_frames < 0))
 			txq->pending_frames = 0;
@@ -2031,8 +2044,6 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 			txq->stopped = false;
 		}
 	}
-
-	__skb_queue_tail(&txq->complete_q, skb);
 }
 
 static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
-- 
cgit v1.2.3


From 86a22acfcb40ed9cf4ceee789b45da6a3314ed77 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 7 Jun 2013 18:12:01 +0200
Subject: ath9k: implement support for .release_buffered_frames()

This adds support for PS-Poll and U-APSD driver-buffered frames (part of
an aggregation session).

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |   5 +
 drivers/net/wireless/ath/ath9k/main.c  |   1 +
 drivers/net/wireless/ath/ath9k/xmit.c  | 175 ++++++++++++++++++++++++++-------
 3 files changed, 145 insertions(+), 36 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 4f798276802c..bd35a54a3f04 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -354,6 +354,11 @@ void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid
 void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an);
 void ath_tx_aggr_sleep(struct ieee80211_sta *sta, struct ath_softc *sc,
 		       struct ath_node *an);
+void ath9k_release_buffered_frames(struct ieee80211_hw *hw,
+				   struct ieee80211_sta *sta,
+				   u16 tids, int nframes,
+				   enum ieee80211_frame_release_type reason,
+				   bool more_data);
 
 /********/
 /* VIFs */
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index e5b186b04b29..bf61a1c3f14c 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2347,6 +2347,7 @@ struct ieee80211_ops ath9k_ops = {
 	.flush		    = ath9k_flush,
 	.tx_frames_pending  = ath9k_tx_frames_pending,
 	.tx_last_beacon     = ath9k_tx_last_beacon,
+	.release_buffered_frames = ath9k_release_buffered_frames,
 	.get_stats	    = ath9k_get_stats,
 	.set_antenna	    = ath9k_set_antenna,
 	.get_antenna	    = ath9k_get_antenna,
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 3931bd82629d..6c9ff9c9730f 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -518,6 +518,10 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 			ath_tx_complete_buf(sc, bf, txq, &bf_head, ts,
 				!txfail);
 		} else {
+			if (tx_info->flags & IEEE80211_TX_STATUS_EOSP) {
+				tx_info->flags &= ~IEEE80211_TX_STATUS_EOSP;
+				ieee80211_sta_eosp(sta);
+			}
 			/* retry the un-acked ones */
 			if (bf->bf_next == NULL && bf_last->bf_stale) {
 				struct ath_buf *tbf;
@@ -786,25 +790,20 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
 	return ndelim;
 }
 
-static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
-					     struct ath_txq *txq,
-					     struct ath_atx_tid *tid,
-					     struct list_head *bf_q,
-					     int *aggr_len)
+static struct ath_buf *
+ath_tx_get_tid_subframe(struct ath_softc *sc, struct ath_txq *txq,
+			struct ath_atx_tid *tid)
 {
-#define PADBYTES(_len) ((4 - ((_len) % 4)) % 4)
-	struct ath_buf *bf, *bf_first = NULL, *bf_prev = NULL;
-	int rl = 0, nframes = 0, ndelim, prev_al = 0;
-	u16 aggr_limit = 0, al = 0, bpad = 0,
-		al_delta, h_baw = tid->baw_size / 2;
-	enum ATH_AGGR_STATUS status = ATH_AGGR_DONE;
-	struct ieee80211_tx_info *tx_info;
 	struct ath_frame_info *fi;
 	struct sk_buff *skb;
+	struct ath_buf *bf;
 	u16 seqno;
 
-	do {
+	while (1) {
 		skb = skb_peek(&tid->buf_q);
+		if (!skb)
+			break;
+
 		fi = get_frame_info(skb);
 		bf = fi->bf;
 		if (!fi->bf)
@@ -820,10 +819,8 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
 		seqno = bf->bf_state.seqno;
 
 		/* do not step over block-ack window */
-		if (!BAW_WITHIN(tid->seq_start, tid->baw_size, seqno)) {
-			status = ATH_AGGR_BAW_CLOSED;
+		if (!BAW_WITHIN(tid->seq_start, tid->baw_size, seqno))
 			break;
-		}
 
 		if (tid->bar_index > ATH_BA_INDEX(tid->seq_start, seqno)) {
 			struct ath_tx_status ts = {};
@@ -837,6 +834,40 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
 			continue;
 		}
 
+		bf->bf_next = NULL;
+		bf->bf_lastbf = bf;
+		return bf;
+	}
+
+	return NULL;
+}
+
+static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
+					     struct ath_txq *txq,
+					     struct ath_atx_tid *tid,
+					     struct list_head *bf_q,
+					     int *aggr_len)
+{
+#define PADBYTES(_len) ((4 - ((_len) % 4)) % 4)
+	struct ath_buf *bf, *bf_first = NULL, *bf_prev = NULL;
+	int rl = 0, nframes = 0, ndelim, prev_al = 0;
+	u16 aggr_limit = 0, al = 0, bpad = 0,
+		al_delta, h_baw = tid->baw_size / 2;
+	enum ATH_AGGR_STATUS status = ATH_AGGR_DONE;
+	struct ieee80211_tx_info *tx_info;
+	struct ath_frame_info *fi;
+	struct sk_buff *skb;
+
+	do {
+		bf = ath_tx_get_tid_subframe(sc, txq, tid);
+		if (!bf) {
+			status = ATH_AGGR_BAW_CLOSED;
+			break;
+		}
+
+		skb = bf->bf_mpdu;
+		fi = get_frame_info(skb);
+
 		if (!bf_first)
 			bf_first = bf;
 
@@ -882,7 +913,7 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
 
 		/* link buffers of this frame to the aggregate */
 		if (!fi->retries)
-			ath_tx_addto_baw(sc, tid, seqno);
+			ath_tx_addto_baw(sc, tid, bf->bf_state.seqno);
 		bf->bf_state.ndelim = ndelim;
 
 		__skb_unlink(skb, &tid->buf_q);
@@ -1090,10 +1121,8 @@ static void ath_tx_fill_desc(struct ath_softc *sc, struct ath_buf *bf,
 			     struct ath_txq *txq, int len)
 {
 	struct ath_hw *ah = sc->sc_ah;
-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(bf->bf_mpdu);
-	struct ath_buf *bf_first = bf;
+	struct ath_buf *bf_first = NULL;
 	struct ath_tx_info info;
-	bool aggr = !!(bf->bf_state.bf_type & BUF_AGGR);
 
 	memset(&info, 0, sizeof(info));
 	info.is_first = true;
@@ -1101,24 +1130,11 @@ static void ath_tx_fill_desc(struct ath_softc *sc, struct ath_buf *bf,
 	info.txpower = MAX_RATE_POWER;
 	info.qcu = txq->axq_qnum;
 
-	info.flags = ATH9K_TXDESC_INTREQ;
-	if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
-		info.flags |= ATH9K_TXDESC_NOACK;
-	if (tx_info->flags & IEEE80211_TX_CTL_LDPC)
-		info.flags |= ATH9K_TXDESC_LDPC;
-
-	ath_buf_set_rate(sc, bf, &info, len);
-
-	if (tx_info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT)
-		info.flags |= ATH9K_TXDESC_CLRDMASK;
-
-	if (bf->bf_state.bfs_paprd)
-		info.flags |= (u32) bf->bf_state.bfs_paprd << ATH9K_TXDESC_PAPRD_S;
-
-
 	while (bf) {
 		struct sk_buff *skb = bf->bf_mpdu;
+		struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 		struct ath_frame_info *fi = get_frame_info(skb);
+		bool aggr = !!(bf->bf_state.bf_type & BUF_AGGR);
 
 		info.type = get_hw_packet_type(skb);
 		if (bf->bf_next)
@@ -1126,6 +1142,26 @@ static void ath_tx_fill_desc(struct ath_softc *sc, struct ath_buf *bf,
 		else
 			info.link = 0;
 
+		if (!bf_first) {
+			bf_first = bf;
+
+			info.flags = ATH9K_TXDESC_INTREQ;
+			if ((tx_info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT) ||
+			    txq == sc->tx.uapsdq)
+				info.flags |= ATH9K_TXDESC_CLRDMASK;
+
+			if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
+				info.flags |= ATH9K_TXDESC_NOACK;
+			if (tx_info->flags & IEEE80211_TX_CTL_LDPC)
+				info.flags |= ATH9K_TXDESC_LDPC;
+
+			if (bf->bf_state.bfs_paprd)
+				info.flags |= (u32) bf->bf_state.bfs_paprd <<
+					      ATH9K_TXDESC_PAPRD_S;
+
+			ath_buf_set_rate(sc, bf, &info, len);
+		}
+
 		info.buf_addr[0] = bf->bf_buf_addr;
 		info.buf_len[0] = skb->len;
 		info.pkt_len = fi->framelen;
@@ -1135,7 +1171,7 @@ static void ath_tx_fill_desc(struct ath_softc *sc, struct ath_buf *bf,
 		if (aggr) {
 			if (bf == bf_first)
 				info.aggr = AGGR_BUF_FIRST;
-			else if (!bf->bf_next)
+			else if (bf == bf_first->bf_lastbf)
 				info.aggr = AGGR_BUF_LAST;
 			else
 				info.aggr = AGGR_BUF_MIDDLE;
@@ -1144,6 +1180,9 @@ static void ath_tx_fill_desc(struct ath_softc *sc, struct ath_buf *bf,
 			info.aggr_len = len;
 		}
 
+		if (bf == bf_first->bf_lastbf)
+			bf_first = NULL;
+
 		ath9k_hw_set_txdesc(ah, bf->bf_desc, &info);
 		bf = bf->bf_next;
 	}
@@ -1328,6 +1367,70 @@ void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta,
 	ath_txq_unlock_complete(sc, txq);
 }
 
+void ath9k_release_buffered_frames(struct ieee80211_hw *hw,
+				   struct ieee80211_sta *sta,
+				   u16 tids, int nframes,
+				   enum ieee80211_frame_release_type reason,
+				   bool more_data)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_node *an = (struct ath_node *)sta->drv_priv;
+	struct ath_txq *txq = sc->tx.uapsdq;
+	struct ieee80211_tx_info *info;
+	struct list_head bf_q;
+	struct ath_buf *bf_tail = NULL, *bf;
+	int sent = 0;
+	int i;
+
+	INIT_LIST_HEAD(&bf_q);
+	for (i = 0; tids && nframes; i++, tids >>= 1) {
+		struct ath_atx_tid *tid;
+
+		if (!(tids & 1))
+			continue;
+
+		tid = ATH_AN_2_TID(an, i);
+		if (tid->paused)
+			continue;
+
+		ath_txq_lock(sc, tid->ac->txq);
+		while (!skb_queue_empty(&tid->buf_q) && nframes > 0) {
+			bf = ath_tx_get_tid_subframe(sc, sc->tx.uapsdq, tid);
+			if (!bf)
+				break;
+
+			__skb_unlink(bf->bf_mpdu, &tid->buf_q);
+			list_add_tail(&bf->list, &bf_q);
+			ath_set_rates(tid->an->vif, tid->an->sta, bf);
+			ath_tx_addto_baw(sc, tid, bf->bf_state.seqno);
+			bf->bf_state.bf_type &= ~BUF_AGGR;
+			if (bf_tail)
+				bf_tail->bf_next = bf;
+
+			bf_tail = bf;
+			nframes--;
+			sent++;
+			TX_STAT_INC(txq->axq_qnum, a_queued_hw);
+
+			if (skb_queue_empty(&tid->buf_q))
+				ieee80211_sta_set_buffered(an->sta, i, false);
+		}
+		ath_txq_unlock_complete(sc, tid->ac->txq);
+	}
+
+	if (list_empty(&bf_q))
+		return;
+
+	info = IEEE80211_SKB_CB(bf_tail->bf_mpdu);
+	info->flags |= IEEE80211_TX_STATUS_EOSP;
+
+	bf = list_first_entry(&bf_q, struct ath_buf, list);
+	ath_txq_lock(sc, txq);
+	ath_tx_fill_desc(sc, bf, txq, 0);
+	ath_tx_txqaddbuf(sc, txq, &bf_q, false);
+	ath_txq_unlock(sc, txq);
+}
+
 /********************/
 /* Queue Management */
 /********************/
-- 
cgit v1.2.3


From 59505c02e106ce9388d816799cd64b0405f98f2f Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 7 Jun 2013 18:12:02 +0200
Subject: ath9k: limit multicast buffer hardware queue depth

The CAB (Content after Beacon) queue is used for beacon-triggered
transmission of buffered multicast frames. If lots of multicast frames
were buffered and this queue fills up, it drowns out all regular
traffic. To limit the damage that buffered traffic can do, try to limit
the queued data to becaon_interval / 8.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h  |   2 +
 drivers/net/wireless/ath/ath9k/beacon.c |  23 +------
 drivers/net/wireless/ath/ath9k/xmit.c   | 115 +++++++++++++++++++++++++++-----
 3 files changed, 104 insertions(+), 36 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index bd35a54a3f04..a6e666bcc0a7 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -344,6 +344,8 @@ int ath_txq_update(struct ath_softc *sc, int qnum,
 void ath_update_max_aggr_framelen(struct ath_softc *sc, int queue, int txop);
 int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
 		 struct ath_tx_control *txctl);
+void ath_tx_cabq(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		 struct sk_buff *skb);
 void ath_tx_tasklet(struct ath_softc *sc);
 void ath_tx_edma_tasklet(struct ath_softc *sc);
 int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index fd1eebab8647..1a17732bb089 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -108,23 +108,6 @@ static void ath9k_beacon_setup(struct ath_softc *sc, struct ieee80211_vif *vif,
 	ath9k_hw_set_txdesc(ah, bf->bf_desc, &info);
 }
 
-static void ath9k_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct ath_softc *sc = hw->priv;
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	struct ath_tx_control txctl;
-
-	memset(&txctl, 0, sizeof(struct ath_tx_control));
-	txctl.txq = sc->beacon.cabq;
-
-	ath_dbg(common, XMIT, "transmitting CABQ packet, skb: %p\n", skb);
-
-	if (ath_tx_start(hw, skb, &txctl) != 0) {
-		ath_dbg(common, XMIT, "CABQ TX failed\n");
-		ieee80211_free_txskb(hw, skb);
-	}
-}
-
 static struct ath_buf *ath9k_beacon_generate(struct ieee80211_hw *hw,
 					     struct ieee80211_vif *vif)
 {
@@ -206,10 +189,8 @@ static struct ath_buf *ath9k_beacon_generate(struct ieee80211_hw *hw,
 
 	ath9k_beacon_setup(sc, vif, bf, info->control.rates[0].idx);
 
-	while (skb) {
-		ath9k_tx_cabq(hw, skb);
-		skb = ieee80211_get_buffered_bc(hw, vif);
-	}
+	if (skb)
+		ath_tx_cabq(hw, vif, skb);
 
 	return bf;
 }
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 6c9ff9c9730f..7e19d9b5214e 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1970,22 +1970,16 @@ static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc,
 	return bf;
 }
 
-/* Upon failure caller should free skb */
-int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
-		 struct ath_tx_control *txctl)
+static int ath_tx_prepare(struct ieee80211_hw *hw, struct sk_buff *skb,
+			  struct ath_tx_control *txctl)
 {
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_sta *sta = txctl->sta;
 	struct ieee80211_vif *vif = info->control.vif;
 	struct ath_softc *sc = hw->priv;
-	struct ath_txq *txq = txctl->txq;
-	struct ath_atx_tid *tid = NULL;
-	struct ath_buf *bf;
-	int padpos, padsize;
 	int frmlen = skb->len + FCS_LEN;
-	u8 tidno;
-	int q;
+	int padpos, padsize;
 
 	/* NOTE:  sta can be NULL according to net/mac80211.h */
 	if (sta)
@@ -2006,6 +2000,11 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
 		hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
 	}
 
+	if ((vif && vif->type != NL80211_IFTYPE_AP &&
+	            vif->type != NL80211_IFTYPE_AP_VLAN) ||
+	    !ieee80211_is_data(hdr->frame_control))
+		info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+
 	/* Add the padding after the header if this is not already done */
 	padpos = ieee80211_hdrlen(hdr->frame_control);
 	padsize = padpos & 3;
@@ -2015,16 +2014,34 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
 
 		skb_push(skb, padsize);
 		memmove(skb->data, skb->data + padsize, padpos);
-		hdr = (struct ieee80211_hdr *) skb->data;
 	}
 
-	if ((vif && vif->type != NL80211_IFTYPE_AP &&
-	            vif->type != NL80211_IFTYPE_AP_VLAN) ||
-	    !ieee80211_is_data(hdr->frame_control))
-		info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
-
 	setup_frame_info(hw, sta, skb, frmlen);
+	return 0;
+}
+
 
+/* Upon failure caller should free skb */
+int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
+		 struct ath_tx_control *txctl)
+{
+	struct ieee80211_hdr *hdr;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_sta *sta = txctl->sta;
+	struct ieee80211_vif *vif = info->control.vif;
+	struct ath_softc *sc = hw->priv;
+	struct ath_txq *txq = txctl->txq;
+	struct ath_atx_tid *tid = NULL;
+	struct ath_buf *bf;
+	u8 tidno;
+	int q;
+	int ret;
+
+	ret = ath_tx_prepare(hw, skb, txctl);
+	if (ret)
+	    return ret;
+
+	hdr = (struct ieee80211_hdr *) skb->data;
 	/*
 	 * At this point, the vif, hw_key and sta pointers in the tx control
 	 * info are no longer valid (overwritten by the ath_frame_info data.
@@ -2086,6 +2103,74 @@ out:
 	return 0;
 }
 
+void ath_tx_cabq(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		 struct sk_buff *skb)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_tx_control txctl = {
+		.txq = sc->beacon.cabq
+	};
+	struct ath_tx_info info = {};
+	struct ieee80211_hdr *hdr;
+	struct ath_buf *bf_tail = NULL;
+	struct ath_buf *bf;
+	LIST_HEAD(bf_q);
+	int duration = 0;
+	int max_duration;
+
+	max_duration =
+		sc->cur_beacon_conf.beacon_interval * 1000 *
+		sc->cur_beacon_conf.dtim_period / ATH_BCBUF;
+
+	do {
+		struct ath_frame_info *fi = get_frame_info(skb);
+
+		if (ath_tx_prepare(hw, skb, &txctl))
+			break;
+
+		bf = ath_tx_setup_buffer(sc, txctl.txq, NULL, skb);
+		if (!bf)
+			break;
+
+		bf->bf_lastbf = bf;
+		ath_set_rates(vif, NULL, bf);
+		ath_buf_set_rate(sc, bf, &info, fi->framelen);
+		duration += info.rates[0].PktDuration;
+		if (bf_tail)
+			bf_tail->bf_next = bf;
+
+		list_add_tail(&bf->list, &bf_q);
+		bf_tail = bf;
+		skb = NULL;
+
+		if (duration > max_duration)
+			break;
+
+		skb = ieee80211_get_buffered_bc(hw, vif);
+	} while(skb);
+
+	if (skb)
+		ieee80211_free_txskb(hw, skb);
+
+	if (list_empty(&bf_q))
+		return;
+
+	bf = list_first_entry(&bf_q, struct ath_buf, list);
+	hdr = (struct ieee80211_hdr *) bf->bf_mpdu->data;
+
+	if (hdr->frame_control & IEEE80211_FCTL_MOREDATA) {
+		hdr->frame_control &= ~IEEE80211_FCTL_MOREDATA;
+		dma_sync_single_for_device(sc->dev, bf->bf_buf_addr,
+			sizeof(*hdr), DMA_TO_DEVICE);
+	}
+
+	ath_txq_lock(sc, txctl.txq);
+	ath_tx_fill_desc(sc, bf, txctl.txq, 0);
+	ath_tx_txqaddbuf(sc, txctl.txq, &bf_q, false);
+	TX_STAT_INC(txctl.txq->axq_qnum, queued);
+	ath_txq_unlock(sc, txctl.txq);
+}
+
 /*****************/
 /* TX Completion */
 /*****************/
-- 
cgit v1.2.3


From 8b5c7f6c2b16a31b9f0fc4dba72524a7028e5e43 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 9 Jun 2013 09:12:50 +0300
Subject: wil6210: fix timeout for start_pcp

It may take up to 3500ms for the FW to start AP/PCP. Increase accordingly,
adding some safety margin.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/wmi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 527ffb543821..aeb64f21273a 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -739,8 +739,12 @@ int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan)
 	if (!wil->secure_pcp)
 		cmd.disable_sec = 1;
 
+	/*
+	 * Processing time may be huge, in case of secure AP it takes about
+	 * 3500ms for FW to start AP
+	 */
 	rc = wmi_call(wil, WMI_PCP_START_CMDID, &cmd, sizeof(cmd),
-		      WMI_PCP_STARTED_EVENTID, &reply, sizeof(reply), 100);
+		      WMI_PCP_STARTED_EVENTID, &reply, sizeof(reply), 5000);
 	if (rc)
 		return rc;
 
-- 
cgit v1.2.3


From af6b48db9239922391952c09a973c00fde235e92 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 9 Jun 2013 09:12:51 +0300
Subject: wil6210: map more FW memory

map card's back-door debug data

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/wmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index aeb64f21273a..cfcaf7bf4da6 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -75,10 +75,11 @@ static const struct {
 	{0x800000, 0x808000, 0x900000}, /* FW data RAM 32k */
 	{0x840000, 0x860000, 0x908000}, /* peripheral data RAM 128k/96k used */
 	{0x880000, 0x88a000, 0x880000}, /* various RGF */
-	{0x8c0000, 0x932000, 0x8c0000}, /* trivial mapping for upper area */
+	{0x8c0000, 0x949000, 0x8c0000}, /* trivial mapping for upper area */
 	/*
 	 * 920000..930000 ucode code RAM
 	 * 930000..932000 ucode data RAM
+	 * 932000..949000 back-door debug data
 	 */
 };
 
-- 
cgit v1.2.3


From f27dbf78c669902adcf45a9561d22f15362a6907 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 9 Jun 2013 09:12:52 +0300
Subject: wil6210: improve frame type reporting

Report FC from the frame itself, as auxiliary information includes
only frame subtype. This is preparation for future changes, when
DMG beacon (extension frame) may be reported through wmi_evt_rx_mgmt()

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/wmi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index cfcaf7bf4da6..ac4d26b34097 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -315,8 +315,8 @@ static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len)
 
 	wil_dbg_wmi(wil, "MGMT: channel %d MCS %d SNR %d\n",
 		    data->info.channel, data->info.mcs, data->info.snr);
-	wil_dbg_wmi(wil, "status 0x%04x len %d stype %04x\n", d_status, d_len,
-		    le16_to_cpu(data->info.stype));
+	wil_dbg_wmi(wil, "status 0x%04x len %d fc 0x%04x\n", d_status, d_len,
+		    le16_to_cpu(fc));
 	wil_dbg_wmi(wil, "qid %d mid %d cid %d\n",
 		    data->info.qid, data->info.mid, data->info.cid);
 
-- 
cgit v1.2.3


From 92646c9f1f8fa2a31a3c12b026c2a8cd0e168341 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 9 Jun 2013 09:12:53 +0300
Subject: wil6210: Derive IE's for AP

When starting secure AP, in some cases wpa_s provides probe template but not
probe/assoc IE's. In this case, derive missing IE's from probe.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 4eb05d0818c3..189c3078ef7d 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -402,6 +402,30 @@ static int wil_cfg80211_set_default_key(struct wiphy *wiphy,
 	return 0;
 }
 
+static int wil_fix_bcon(struct wil6210_priv *wil,
+			struct cfg80211_beacon_data *bcon)
+{
+	struct ieee80211_mgmt *f = (struct ieee80211_mgmt *)bcon->probe_resp;
+	size_t hlen = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
+	int rc = 0;
+
+	if (bcon->probe_resp_len <= hlen)
+		return 0;
+
+	if (!bcon->proberesp_ies) {
+		bcon->proberesp_ies = f->u.probe_resp.variable;
+		bcon->proberesp_ies_len = bcon->probe_resp_len - hlen;
+		rc = 1;
+	}
+	if (!bcon->assocresp_ies) {
+		bcon->assocresp_ies = f->u.probe_resp.variable;
+		bcon->assocresp_ies_len = bcon->probe_resp_len - hlen;
+		rc = 1;
+	}
+
+	return rc;
+}
+
 static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 				 struct net_device *ndev,
 				 struct cfg80211_ap_settings *info)
@@ -423,6 +447,9 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 	print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET,
 			     info->ssid, info->ssid_len);
 
+	if (wil_fix_bcon(wil, bcon))
+		wil_dbg_misc(wil, "Fixed bcon\n");
+
 	rc = wil_reset(wil);
 	if (rc)
 		return rc;
-- 
cgit v1.2.3


From d58db4e49f58152a28dd598ebbec56f1fe92aa80 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 9 Jun 2013 09:12:54 +0300
Subject: wil6210: Send EAPOL frames using normal Tx queue

No more need for special processing of EAPOL, FW can now send EAPOL frames
using normal Tx queue for TID 0

This fixes "schedule while atomic" bug - start_xmit called in softirq context;
while WMI mechanism that was used may sleep.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/txrx.c    | 20 ++++++++----------
 drivers/net/wireless/ath/wil6210/wil6210.h |  1 -
 drivers/net/wireless/ath/wil6210/wmi.c     | 34 ------------------------------
 3 files changed, 9 insertions(+), 46 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 00dffeda983e..e1c492b9dfef 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -768,18 +768,16 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 		wil_err(wil, "Xmit in monitor mode not supported\n");
 		goto drop;
 	}
-	if (skb->protocol == cpu_to_be16(ETH_P_PAE)) {
-		rc = wmi_tx_eapol(wil, skb);
-	} else {
-		/* find vring */
-		vring = wil_find_tx_vring(wil, skb);
-		if (!vring) {
-			wil_err(wil, "No Tx VRING available\n");
-			goto drop;
-		}
-		/* set up vring entry */
-		rc = wil_tx_vring(wil, vring, skb);
+
+	/* find vring */
+	vring = wil_find_tx_vring(wil, skb);
+	if (!vring) {
+		wil_err(wil, "No Tx VRING available\n");
+		goto drop;
 	}
+	/* set up vring entry */
+	rc = wil_tx_vring(wil, vring, skb);
+
 	switch (rc) {
 	case 0:
 		/* statistics will be updated on the tx_complete */
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 373cf656f5b0..44fdab51de7e 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -329,7 +329,6 @@ int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid);
 int wmi_get_ssid(struct wil6210_priv *wil, u8 *ssid_len, void *ssid);
 int wmi_set_channel(struct wil6210_priv *wil, int channel);
 int wmi_get_channel(struct wil6210_priv *wil, int *channel);
-int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb);
 int wmi_del_cipher_key(struct wil6210_priv *wil, u8 key_index,
 		       const void *mac_addr);
 int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index,
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index ac4d26b34097..dc8059ad4bab 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -839,40 +839,6 @@ int wmi_p2p_cfg(struct wil6210_priv *wil, int channel)
 	return wmi_send(wil, WMI_P2P_CFG_CMDID, &cmd, sizeof(cmd));
 }
 
-int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb)
-{
-	struct wmi_eapol_tx_cmd *cmd;
-	struct ethhdr *eth;
-	u16 eapol_len = skb->len - ETH_HLEN;
-	void *eapol = skb->data + ETH_HLEN;
-	uint i;
-	int rc;
-
-	skb_set_mac_header(skb, 0);
-	eth = eth_hdr(skb);
-	wil_dbg_wmi(wil, "EAPOL %d bytes to %pM\n", eapol_len, eth->h_dest);
-	for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) {
-		if (memcmp(wil->dst_addr[i], eth->h_dest, ETH_ALEN) == 0)
-			goto found_dest;
-	}
-
-	return -EINVAL;
-
- found_dest:
-	/* find out eapol data & len */
-	cmd = kzalloc(sizeof(*cmd) + eapol_len, GFP_KERNEL);
-	if (!cmd)
-		return -EINVAL;
-
-	memcpy(cmd->dst_mac, eth->h_dest, ETH_ALEN);
-	cmd->eapol_len = cpu_to_le16(eapol_len);
-	memcpy(cmd->eapol, eapol, eapol_len);
-	rc = wmi_send(wil, WMI_EAPOL_TX_CMDID, cmd, sizeof(*cmd) + eapol_len);
-	kfree(cmd);
-
-	return rc;
-}
-
 int wmi_del_cipher_key(struct wil6210_priv *wil, u8 key_index,
 		       const void *mac_addr)
 {
-- 
cgit v1.2.3


From e31b25627f6ddcc0905d552c3a9642b1060657bb Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 9 Jun 2013 09:12:55 +0300
Subject: wil6210: Init Rx vring right after reset

at the vring initialisation, memory pool get allocated in the FW.
Make it 1-st because FW need this memory pool to precess
next commands

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 7 +++++--
 drivers/net/wireless/ath/wil6210/main.c     | 8 +++++---
 2 files changed, 10 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 189c3078ef7d..61c302a6bdea 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -454,6 +454,11 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 	if (rc)
 		return rc;
 
+	/* Rx VRING. */
+	rc = wil_rx_init(wil);
+	if (rc)
+		return rc;
+
 	rc = wmi_set_ssid(wil, info->ssid_len, info->ssid);
 	if (rc)
 		return rc;
@@ -482,8 +487,6 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 	if (rc)
 		return rc;
 
-	/* Rx VRING. After MAC and beacon */
-	rc = wil_rx_init(wil);
 
 	netif_carrier_on(ndev);
 
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index c97b864667c5..8cafa456398a 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -295,6 +295,11 @@ static int __wil_up(struct wil6210_priv *wil)
 	if (rc)
 		return rc;
 
+	/* Rx VRING. After MAC and beacon */
+	rc = wil_rx_init(wil);
+	if (rc)
+		return rc;
+
 	/* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */
 	wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC);
 	switch (wdev->iftype) {
@@ -356,9 +361,6 @@ static int __wil_up(struct wil6210_priv *wil)
 			return rc;
 	}
 
-	/* Rx VRING. After MAC and beacon */
-	wil_rx_init(wil);
-
 	napi_enable(&wil->napi_rx);
 	napi_enable(&wil->napi_tx);
 
-- 
cgit v1.2.3


From eb4928cfc6263c3377d049a41830e36d1af15b31 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 9 Jun 2013 13:10:05 +0200
Subject: wil6210: fix name of tracing config option

Tracing in wil6210 is activated with WIL6210_TRACING and not with
ATH6KL_TRACING, this is used for the ath6kl driver. Rename the config
option.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig
index 5644ac54facc..ce8c0381825e 100644
--- a/drivers/net/wireless/ath/wil6210/Kconfig
+++ b/drivers/net/wireless/ath/wil6210/Kconfig
@@ -28,7 +28,7 @@ config WIL6210_ISR_COR
 	  such monitoring impossible.
 	  Say y unless you debug interrupts
 
-config ATH6KL_TRACING
+config WIL6210_TRACING
 	bool "wil6210 tracing support"
 	depends on WIL6210
 	depends on EVENT_TRACING
-- 
cgit v1.2.3


From 4c895f41a750b3f81bf0890d2730ac6b867357f8 Mon Sep 17 00:00:00 2001
From: Kirshenbaum Erez <erezk@wilocity.com>
Date: Sun, 9 Jun 2013 17:35:28 +0300
Subject: wil6210: Fix AP/PCP start flow

WMI PCP Start flow should not be handled through:
net_device_ops->ndo_open()->wil_up()->__wil_up()
because it missing mandatory FW parameters (SSID,Channel,IEs, Security...).

Prior to AP starting __wil_up() may be called with iftype set
cfg80211_ops->change_virtual_intf(NL80211_IFTYPE_AP or STATION)
depend on the application hostapd/wpa_supplicant/iw.
there should not be an attempt to start an AP flow,
AP/PCP start flow will be started latter by cfg80211_ops->start_ap().

Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wil6210/main.c | 34 ---------------------------------
 1 file changed, 34 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 8cafa456398a..0a2844c48a60 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -286,10 +286,7 @@ static int __wil_up(struct wil6210_priv *wil)
 {
 	struct net_device *ndev = wil_to_ndev(wil);
 	struct wireless_dev *wdev = wil->wdev;
-	struct ieee80211_channel *channel = wdev->preset_chandef.chan;
 	int rc;
-	int bi;
-	u16 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
 
 	rc = wil_reset(wil);
 	if (rc)
@@ -300,32 +297,25 @@ static int __wil_up(struct wil6210_priv *wil)
 	if (rc)
 		return rc;
 
-	/* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */
-	wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC);
 	switch (wdev->iftype) {
 	case NL80211_IFTYPE_STATION:
 		wil_dbg_misc(wil, "type: STATION\n");
-		bi = 0;
 		ndev->type = ARPHRD_ETHER;
 		break;
 	case NL80211_IFTYPE_AP:
 		wil_dbg_misc(wil, "type: AP\n");
-		bi = 100;
 		ndev->type = ARPHRD_ETHER;
 		break;
 	case NL80211_IFTYPE_P2P_CLIENT:
 		wil_dbg_misc(wil, "type: P2P_CLIENT\n");
-		bi = 0;
 		ndev->type = ARPHRD_ETHER;
 		break;
 	case NL80211_IFTYPE_P2P_GO:
 		wil_dbg_misc(wil, "type: P2P_GO\n");
-		bi = 100;
 		ndev->type = ARPHRD_ETHER;
 		break;
 	case NL80211_IFTYPE_MONITOR:
 		wil_dbg_misc(wil, "type: Monitor\n");
-		bi = 0;
 		ndev->type = ARPHRD_IEEE80211_RADIOTAP;
 		/* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */
 		break;
@@ -333,33 +323,9 @@ static int __wil_up(struct wil6210_priv *wil)
 		return -EOPNOTSUPP;
 	}
 
-	/* Apply profile in the following order: */
-	/* SSID and channel for the AP */
-	switch (wdev->iftype) {
-	case NL80211_IFTYPE_AP:
-	case NL80211_IFTYPE_P2P_GO:
-		if (wdev->ssid_len == 0) {
-			wil_err(wil, "SSID not set\n");
-			return -EINVAL;
-		}
-		rc = wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid);
-		if (rc)
-			return rc;
-		break;
-	default:
-		break;
-	}
-
 	/* MAC address - pre-requisite for other commands */
 	wmi_set_mac_address(wil, ndev->dev_addr);
 
-	/* Set up beaconing if required. */
-	if (bi > 0) {
-		rc = wmi_pcp_start(wil, bi, wmi_nettype,
-				   (channel ? channel->hw_value : 0));
-		if (rc)
-			return rc;
-	}
 
 	napi_enable(&wil->napi_rx);
 	napi_enable(&wil->napi_tx);
-- 
cgit v1.2.3


From a226c3d96d920ba88a28f463ba77c9693988ff1e Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sun, 9 Jun 2013 18:51:24 +0200
Subject: ath9k_htc: add STBC TX support

All known ar7010+ar* device and current FW support STBC TX. This patch
make use of it and suggest to send STBC if peer support it.
I use wort "suggest" since currenly we have separate rate controller
in FW which will make decision based on rate and hardware.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc.h          | 1 +
 drivers/net/wireless/ath/ath9k/htc_drv_init.c | 3 +++
 drivers/net/wireless/ath/ath9k/htc_drv_main.c | 2 ++
 3 files changed, 6 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 0085e643132f..69581031f2cd 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -142,6 +142,7 @@ struct ath9k_htc_target_aggr {
 #define WLAN_RC_40_FLAG  0x02
 #define WLAN_RC_SGI_FLAG 0x04
 #define WLAN_RC_HT_FLAG  0x08
+#define ATH_RC_TX_STBC_FLAG 0x20
 
 struct ath9k_htc_rateset {
 	u8 rs_nrates;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 59f64367e8ca..bb0ba9e3e083 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -517,6 +517,9 @@ static void setup_ht_cap(struct ath9k_htc_priv *priv,
 	ath_dbg(common, CONFIG, "TX streams %d, RX streams: %d\n",
 		tx_streams, rx_streams);
 
+	if (tx_streams >= 2)
+		ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
+
 	if (tx_streams != rx_streams) {
 		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
 		ht_info->mcs.tx_params |= ((tx_streams - 1) <<
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 34869c2405aa..eaa94feb4333 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -627,6 +627,8 @@ static void ath9k_htc_setup_rate(struct ath9k_htc_priv *priv,
 		trate->rates.ht_rates.rs_nrates = j;
 
 		caps = WLAN_RC_HT_FLAG;
+		if (sta->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)
+			caps |= ATH_RC_TX_STBC_FLAG;
 		if (sta->ht_cap.mcs.rx_mask[1])
 			caps |= WLAN_RC_DS_FLAG;
 		if ((sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
-- 
cgit v1.2.3


From 693026ef2e751fd94d2e6c71028e68343cc875d5 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 9 Jun 2013 18:53:58 +0200
Subject: b43: ensue that BCMA is "y" when B43 is "y"

When b43 gets build into the kernel and it should use bcma we have to
ensure that bcma was also build into the kernel and not as a module.
In this patch this is also done for SSB, although you can not
build b43 without ssb support for now.

This fixes a build problem reported by Randy Dunlap in
5187EB95.2060605@infradead.org

Reported-By: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 078e6f3477a9..13f91ac9499e 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -28,7 +28,7 @@ config B43
 
 config B43_BCMA
 	bool "Support for BCMA bus"
-	depends on B43 && BCMA
+	depends on B43 && (BCMA = y || BCMA = B43)
 	default y
 
 config B43_BCMA_EXTRA
@@ -39,7 +39,7 @@ config B43_BCMA_EXTRA
 
 config B43_SSB
 	bool
-	depends on B43 && SSB
+	depends on B43 && (SSB = y || SSB = B43)
 	default y
 
 # Auto-select SSB PCI-HOST support, if possible
-- 
cgit v1.2.3


From d186899fa55ae773ae26cf57aa274c50de4c508c Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 9 Jun 2013 18:59:42 +0200
Subject: bcma: activate PCI host option by default

Most users are using bcma with a PCIe card, activate support for
this by default.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/bcma/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index 8b4221cfd118..380a2003231e 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
 config BCMA_HOST_PCI
 	bool "Support for BCMA on PCI-host bus"
 	depends on BCMA_HOST_PCI_POSSIBLE
+	default y
 
 config BCMA_DRIVER_PCI_HOSTMODE
 	bool "Driver for PCI core working in hostmode"
-- 
cgit v1.2.3


From 6b692f3b66e4a70dff73b3cdc60f7e6d6823300a Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 9 Jun 2013 18:59:43 +0200
Subject: b43: activate N-PHY and HT-PHY support by default

N-PHY and HT-PHY support is more or less stable and should be activated
by default.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 13f91ac9499e..3f21e0ba39ba 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -111,6 +111,7 @@ config B43_PIO
 config B43_PHY_N
 	bool "Support for 802.11n (N-PHY) devices"
 	depends on B43
+	default y
 	---help---
 	  Support for the N-PHY.
 
@@ -132,6 +133,7 @@ config B43_PHY_LP
 config B43_PHY_HT
 	bool "Support for HT-PHY (high throughput) devices"
 	depends on B43 && B43_BCMA
+	default y
 	---help---
 	  Support for the HT-PHY.
 
-- 
cgit v1.2.3


From 30d5b709da23f4ab9836c7f66d2d2e780a69cf12 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 10 Jun 2013 13:49:38 +0530
Subject: ath9k_hw: Assign default xlna config for AR9485

For AR9485 boards with XLNA, the default gpio config
is not set correctly, fix this.

Cc: stable@vger.kernel.org
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 8 ++++++--
 drivers/net/wireless/ath/ath9k/ar9003_phy.h    | 2 ++
 2 files changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index e6b92ff265fd..25b8bbbe74fe 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3563,14 +3563,18 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
 {
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	int chain;
-	u32 regval;
+	u32 regval, value;
 	static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = {
 			AR_PHY_SWITCH_CHAIN_0,
 			AR_PHY_SWITCH_CHAIN_1,
 			AR_PHY_SWITCH_CHAIN_2,
 	};
 
-	u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
+	if (AR_SREV_9485(ah) && (ar9003_hw_get_rx_gain_idx(ah) == 0))
+		ath9k_hw_cfg_output(ah, AR9300_EXT_LNA_CTL_GPIO_AR9485,
+				    AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED);
+
+	value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
 
 	if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
 		REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM,
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index e71774196c01..5013c731f9f6 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -351,6 +351,8 @@
 
 #define AR_PHY_CCA_NOM_VAL_9330_2GHZ          -118
 
+#define AR9300_EXT_LNA_CTL_GPIO_AR9485 9
+
 /*
  * AGC Field Definitions
  */
-- 
cgit v1.2.3


From 696df78509d1f81b651dd98ecdc1aecab616db6b Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 10 Jun 2013 13:49:39 +0530
Subject: ath9k: Fix noisefloor calibration

The commits,

"ath9k: Fix regression in channelwidth switch at the same channel"
"ath9k: Fix invalid noisefloor reading due to channel update"

attempted to fix noisefloor calibration when a channel switch
happens due to HT20/HT40 bandwidth change. This is causing invalid
readings resulting in messages like:

"ath: phy16: NF[0] (-45) > MAX (-95), correcting to MAX".

This results in an incorrect noise being used initially for reporting
the signal level of received packets, until NF calibration is done
and the history buffer is updated via the ANI timer, which happens
much later.

When a bandwidth change happens, it is appropriate to reset
the internal history data for the channel. Do this correctly in the
reset() routine by checking the "chanmode" variable.

Cc: stable@vger.kernel.org
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c   | 3 ++-
 drivers/net/wireless/ath/ath9k/main.c | 7 -------
 2 files changed, 2 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index d813ab8104d6..ca9d9cd14ddb 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1870,7 +1870,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 
 	ah->caldata = caldata;
 	if (caldata && (chan->channel != caldata->channel ||
-			chan->channelFlags != caldata->channelFlags)) {
+			chan->channelFlags != caldata->channelFlags ||
+			chan->chanmode != caldata->chanmode)) {
 		/* Operating channel changed, reset channel calibration data */
 		memset(caldata, 0, sizeof(*caldata));
 		ath9k_init_nfcal_hist_buffer(ah, chan);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index bf61a1c3f14c..1737a3e33685 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1210,13 +1210,6 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 		ath_update_survey_stats(sc);
 		spin_unlock_irqrestore(&common->cc_lock, flags);
 
-		/*
-		 * Preserve the current channel values, before updating
-		 * the same channel
-		 */
-		if (ah->curchan && (old_pos == pos))
-			ath9k_hw_getnf(ah, ah->curchan);
-
 		ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
 					  curchan, channel_type);
 
-- 
cgit v1.2.3


From d3bcb7b24bbf09fde8405770e676fe0c11c79662 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 10 Jun 2013 13:49:40 +0530
Subject: ath9k: Do not assign noise for NULL caldata

ah->noise is maintained globally and not per-channel. This
is updated in the reset() routine after the NF history has been
filled for the *current channel*, just before switching to
the new channel. There is no need to do it inside getnf(), since
ah->noise must contain a value for the new channel.

Cc: stable@vger.kernel.org
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/calib.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 7304e7585009..5e8219a91e25 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -387,7 +387,6 @@ bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan)
 
 	if (!caldata) {
 		chan->noisefloor = nf;
-		ah->noise = ath9k_hw_getchan_noise(ah, chan);
 		return false;
 	}
 
-- 
cgit v1.2.3


From 0967e01e8e713ed2982fb4eba8ba13794e9a6e89 Mon Sep 17 00:00:00 2001
From: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Date: Tue, 11 Jun 2013 15:10:31 +0200
Subject: ath5k: make use of the new rate control API

This patch enabels ath5k to use the new rate table to lookup each
mrr rate and retry information per packet.

Signed-off-by: Benjamin Vahl <bvahl@net.t-labs.tu-berlin.de>
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/base.c         | 79 ++++++++++++++++++++++-----
 drivers/net/wireless/ath/ath5k/base.h         | 14 +++--
 drivers/net/wireless/ath/ath5k/mac80211-ops.c |  2 +-
 3 files changed, 74 insertions(+), 21 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 7f702fe3ecc2..ce67ab791eae 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -60,6 +60,7 @@
 
 #include <asm/unaligned.h>
 
+#include <net/mac80211.h>
 #include "base.h"
 #include "reg.h"
 #include "debug.h"
@@ -666,9 +667,46 @@ static enum ath5k_pkt_type get_hw_packet_type(struct sk_buff *skb)
 	return htype;
 }
 
+static struct ieee80211_rate *
+ath5k_get_rate(const struct ieee80211_hw *hw,
+	       const struct ieee80211_tx_info *info,
+	       struct ath5k_buf *bf, int idx)
+{
+	/*
+	* convert a ieee80211_tx_rate RC-table entry to
+	* the respective ieee80211_rate struct
+	*/
+	if (bf->rates[idx].idx < 0) {
+		return NULL;
+	}
+
+	return &hw->wiphy->bands[info->band]->bitrates[ bf->rates[idx].idx ];
+}
+
+static u16
+ath5k_get_rate_hw_value(const struct ieee80211_hw *hw,
+			const struct ieee80211_tx_info *info,
+			struct ath5k_buf *bf, int idx)
+{
+	struct ieee80211_rate *rate;
+	u16 hw_rate;
+	u8 rc_flags;
+
+	rate = ath5k_get_rate(hw, info, bf, idx);
+	if (!rate)
+		return 0;
+
+	rc_flags = bf->rates[idx].flags;
+	hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ?
+		   rate->hw_value_short : rate->hw_value;
+
+	return hw_rate;
+}
+
 static int
 ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf,
-		  struct ath5k_txq *txq, int padsize)
+		  struct ath5k_txq *txq, int padsize,
+		  struct ieee80211_tx_control *control)
 {
 	struct ath5k_desc *ds = bf->desc;
 	struct sk_buff *skb = bf->skb;
@@ -688,7 +726,11 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf,
 	bf->skbaddr = dma_map_single(ah->dev, skb->data, skb->len,
 			DMA_TO_DEVICE);
 
-	rate = ieee80211_get_tx_rate(ah->hw, info);
+	ieee80211_get_tx_rates(info->control.vif, (control) ? control->sta : NULL, skb, bf->rates,
+			       ARRAY_SIZE(bf->rates));
+
+	rate = ath5k_get_rate(ah->hw, info, bf, 0);
+
 	if (!rate) {
 		ret = -EINVAL;
 		goto err_unmap;
@@ -698,8 +740,8 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf,
 		flags |= AR5K_TXDESC_NOACK;
 
 	rc_flags = info->control.rates[0].flags;
-	hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ?
-		rate->hw_value_short : rate->hw_value;
+
+	hw_rate = ath5k_get_rate_hw_value(ah->hw, info, bf, 0);
 
 	pktlen = skb->len;
 
@@ -722,12 +764,13 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf,
 		duration = le16_to_cpu(ieee80211_ctstoself_duration(ah->hw,
 			info->control.vif, pktlen, info));
 	}
+
 	ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
 		ieee80211_get_hdrlen_from_skb(skb), padsize,
 		get_hw_packet_type(skb),
 		(ah->ah_txpower.txp_requested * 2),
 		hw_rate,
-		info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags,
+		bf->rates[0].count, keyidx, ah->ah_tx_ant, flags,
 		cts_rate, duration);
 	if (ret)
 		goto err_unmap;
@@ -736,13 +779,15 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf,
 	if (ah->ah_capabilities.cap_has_mrr_support) {
 		memset(mrr_rate, 0, sizeof(mrr_rate));
 		memset(mrr_tries, 0, sizeof(mrr_tries));
+
 		for (i = 0; i < 3; i++) {
-			rate = ieee80211_get_alt_retry_rate(ah->hw, info, i);
+
+			rate = ath5k_get_rate(ah->hw, info, bf, i);
 			if (!rate)
 				break;
 
-			mrr_rate[i] = rate->hw_value;
-			mrr_tries[i] = info->control.rates[i + 1].count;
+			mrr_rate[i] = ath5k_get_rate_hw_value(ah->hw, info, bf, i);
+			mrr_tries[i] = bf->rates[i].count;
 		}
 
 		ath5k_hw_setup_mrr_tx_desc(ah, ds,
@@ -1515,7 +1560,7 @@ unlock:
 
 void
 ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
-	       struct ath5k_txq *txq)
+	       struct ath5k_txq *txq, struct ieee80211_tx_control *control)
 {
 	struct ath5k_hw *ah = hw->priv;
 	struct ath5k_buf *bf;
@@ -1555,7 +1600,7 @@ ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
 
 	bf->skb = skb;
 
-	if (ath5k_txbuf_setup(ah, bf, txq, padsize)) {
+	if (ath5k_txbuf_setup(ah, bf, txq, padsize, control)) {
 		bf->skb = NULL;
 		spin_lock_irqsave(&ah->txbuflock, flags);
 		list_add_tail(&bf->list, &ah->txbuf);
@@ -1571,11 +1616,13 @@ drop_packet:
 
 static void
 ath5k_tx_frame_completed(struct ath5k_hw *ah, struct sk_buff *skb,
-			 struct ath5k_txq *txq, struct ath5k_tx_status *ts)
+			 struct ath5k_txq *txq, struct ath5k_tx_status *ts,
+			 struct ath5k_buf *bf)
 {
 	struct ieee80211_tx_info *info;
 	u8 tries[3];
 	int i;
+	int size = 0;
 
 	ah->stats.tx_all_count++;
 	ah->stats.tx_bytes_count += skb->len;
@@ -1587,6 +1634,9 @@ ath5k_tx_frame_completed(struct ath5k_hw *ah, struct sk_buff *skb,
 
 	ieee80211_tx_info_clear_status(info);
 
+	size = min_t(int, sizeof(info->status.rates), sizeof(bf->rates));
+	memcpy(info->status.rates, bf->rates, size);
+
 	for (i = 0; i < ts->ts_final_idx; i++) {
 		struct ieee80211_tx_rate *r =
 			&info->status.rates[i];
@@ -1663,7 +1713,7 @@ ath5k_tx_processq(struct ath5k_hw *ah, struct ath5k_txq *txq)
 
 			dma_unmap_single(ah->dev, bf->skbaddr, skb->len,
 					DMA_TO_DEVICE);
-			ath5k_tx_frame_completed(ah, skb, txq, &ts);
+			ath5k_tx_frame_completed(ah, skb, txq, &ts, bf);
 		}
 
 		/*
@@ -1917,7 +1967,7 @@ ath5k_beacon_send(struct ath5k_hw *ah)
 
 	skb = ieee80211_get_buffered_bc(ah->hw, vif);
 	while (skb) {
-		ath5k_tx_queue(ah->hw, skb, ah->cabq);
+		ath5k_tx_queue(ah->hw, skb, ah->cabq, NULL);
 
 		if (ah->cabq->txq_len >= ah->cabq->txq_max)
 			break;
@@ -2442,7 +2492,8 @@ ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops)
 			IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 			IEEE80211_HW_SIGNAL_DBM |
 			IEEE80211_HW_MFP_CAPABLE |
-			IEEE80211_HW_REPORTS_TX_ACK_STATUS;
+			IEEE80211_HW_REPORTS_TX_ACK_STATUS |
+			IEEE80211_HW_SUPPORTS_RC_TABLE;
 
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_AP) |
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index 6c94c7ff2350..ca9a83ceeee1 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -47,6 +47,7 @@ struct ath5k_hw;
 struct ath5k_txq;
 struct ieee80211_channel;
 struct ath_bus_ops;
+struct ieee80211_tx_control;
 enum nl80211_iftype;
 
 enum ath5k_srev_type {
@@ -61,11 +62,12 @@ struct ath5k_srev_name {
 };
 
 struct ath5k_buf {
-	struct list_head	list;
-	struct ath5k_desc	*desc;	/* virtual addr of desc */
-	dma_addr_t		daddr;	/* physical addr of desc */
-	struct sk_buff		*skb;	/* skbuff for buf */
-	dma_addr_t		skbaddr;/* physical addr of skb data */
+	struct list_head		list;
+	struct ath5k_desc		*desc;		/* virtual addr of desc */
+	dma_addr_t			daddr;		/* physical addr of desc */
+	struct sk_buff			*skb;		/* skbuff for buf */
+	dma_addr_t			skbaddr;	/* physical addr of skb data */
+	struct ieee80211_tx_rate	rates[4];	/* number of multi-rate stages */
 };
 
 struct ath5k_vif {
@@ -103,7 +105,7 @@ int ath5k_chan_set(struct ath5k_hw *ah, struct ieee80211_channel *chan);
 void ath5k_txbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf);
 void ath5k_rxbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf);
 void ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
-		    struct ath5k_txq *txq);
+		    struct ath5k_txq *txq, struct ieee80211_tx_control *control);
 
 const char *ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val);
 
diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
index 06f86f435711..81b686c6a376 100644
--- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c
+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
@@ -66,7 +66,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
 		return;
 	}
 
-	ath5k_tx_queue(hw, skb, &ah->txqs[qnum]);
+	ath5k_tx_queue(hw, skb, &ah->txqs[qnum], control);
 }
 
 
-- 
cgit v1.2.3


From 42ce8943e14734dd388e6934fff31a11c1adad8f Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Wed, 12 Jun 2013 16:44:47 +0200
Subject: iwlegacy: small refactoring of il_{stop,wake}_queue

Tested-by: Jake Edge <jake@lwn.net>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/common.h | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h
index 4caaf52986a4..67da89b39e11 100644
--- a/drivers/net/wireless/iwlegacy/common.h
+++ b/drivers/net/wireless/iwlegacy/common.h
@@ -2256,6 +2256,19 @@ il_set_swq_id(struct il_tx_queue *txq, u8 ac, u8 hwq)
 	txq->swq_id = (hwq << 2) | ac;
 }
 
+static inline void
+_il_wake_queue(struct il_priv *il, u8 ac)
+{
+	if (atomic_dec_return(&il->queue_stop_count[ac]) <= 0)
+		ieee80211_wake_queue(il->hw, ac);
+}
+
+static inline void
+_il_stop_queue(struct il_priv *il, u8 ac)
+{
+	if (atomic_inc_return(&il->queue_stop_count[ac]) > 0)
+		ieee80211_stop_queue(il->hw, ac);
+}
 static inline void
 il_wake_queue(struct il_priv *il, struct il_tx_queue *txq)
 {
@@ -2264,8 +2277,7 @@ il_wake_queue(struct il_priv *il, struct il_tx_queue *txq)
 	u8 hwq = (queue >> 2) & 0x1f;
 
 	if (test_and_clear_bit(hwq, il->queue_stopped))
-		if (atomic_dec_return(&il->queue_stop_count[ac]) <= 0)
-			ieee80211_wake_queue(il->hw, ac);
+		_il_wake_queue(il, ac);
 }
 
 static inline void
@@ -2276,8 +2288,7 @@ il_stop_queue(struct il_priv *il, struct il_tx_queue *txq)
 	u8 hwq = (queue >> 2) & 0x1f;
 
 	if (!test_and_set_bit(hwq, il->queue_stopped))
-		if (atomic_inc_return(&il->queue_stop_count[ac]) > 0)
-			ieee80211_stop_queue(il->hw, ac);
+		_il_stop_queue(il, ac);
 }
 
 #ifdef ieee80211_stop_queue
-- 
cgit v1.2.3


From c6af8074fd3654b2a8d7b31304d686519b062e14 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Wed, 12 Jun 2013 16:44:48 +0200
Subject: iwlegacy: add il_{stop,wake}_queues_by_reason functions

Add functions that will stop/wake all queues. Make them safe
regarding multiple calls and when some ac are stopped/woke
independently.

Tested-by: Jake Edge <jake@lwn.net>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/common.h | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h
index 67da89b39e11..83f8ed8a5528 100644
--- a/drivers/net/wireless/iwlegacy/common.h
+++ b/drivers/net/wireless/iwlegacy/common.h
@@ -1299,6 +1299,8 @@ struct il_priv {
 	/* queue refcounts */
 #define IL_MAX_HW_QUEUES	32
 	unsigned long queue_stopped[BITS_TO_LONGS(IL_MAX_HW_QUEUES)];
+#define IL_STOP_REASON_PASSIVE	0
+	unsigned long stop_reason;
 	/* for each AC */
 	atomic_t queue_stop_count[4];
 
@@ -2291,6 +2293,26 @@ il_stop_queue(struct il_priv *il, struct il_tx_queue *txq)
 		_il_stop_queue(il, ac);
 }
 
+static inline void
+il_wake_queues_by_reason(struct il_priv *il, int reason)
+{
+	u8 ac;
+
+	if (test_and_clear_bit(reason, &il->stop_reason))
+		for (ac = 0; ac < 4; ac++)
+			_il_wake_queue(il, ac);
+}
+
+static inline void
+il_stop_queues_by_reason(struct il_priv *il, int reason)
+{
+	u8 ac;
+
+	if (!test_and_set_bit(reason, &il->stop_reason))
+		for (ac = 0; ac < 4; ac++)
+			_il_stop_queue(il, ac);
+}
+
 #ifdef ieee80211_stop_queue
 #undef ieee80211_stop_queue
 #endif
-- 
cgit v1.2.3


From 8cdbab7f07e82f26c48adcc761391c1c7ff339ff Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Wed, 12 Jun 2013 16:44:49 +0200
Subject: iwl4965: workaround for firmware frame tx rejection

Firmware can reject to transmit frame on passive channel, when it
did not yet received any frame with valid CRC on that channel.
Workaround this problem in the driver.

Tested-by: Jake Edge <jake@lwn.net>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/4965-mac.c | 18 ++++++++++++++++++
 drivers/net/wireless/iwlegacy/common.c   | 11 +++++++++++
 2 files changed, 29 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c
index 9a95045c97b6..1c44bb59f6c8 100644
--- a/drivers/net/wireless/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -588,6 +588,11 @@ il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr,
 		return;
 	}
 
+	if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) {
+		il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
+		D_INFO("Woke queues - frame received on passive channel\n");
+	}
+
 	/* In case of HW accelerated crypto and bad decryption, drop */
 	if (!il->cfg->mod_params->sw_crypto &&
 	    il_set_decrypted_flag(il, hdr, ampdu_status, stats))
@@ -2806,6 +2811,19 @@ il4965_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb)
 		return;
 	}
 
+	/*
+	 * Firmware will not transmit frame on passive channel, if it not yet
+	 * received some valid frame on that channel. When this error happen
+	 * we have to wait until firmware will unblock itself i.e. when we
+	 * note received beacon or other frame. We unblock queues in
+	 * il4965_pass_packet_to_mac80211 or in il_mac_bss_info_changed.
+	 */
+	if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) &&
+	    il->iw_mode == NL80211_IFTYPE_STATION) {
+		il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
+		D_INFO("Stopped queues - RX waiting on passive channel\n");
+	}
+
 	spin_lock_irqsave(&il->sta_lock, flags);
 	if (txq->sched_retry) {
 		const u32 scd_ssn = il4965_get_scd_ssn(tx_resp);
diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c
index e9a3cbc409ae..3195aad440dd 100644
--- a/drivers/net/wireless/iwlegacy/common.c
+++ b/drivers/net/wireless/iwlegacy/common.c
@@ -5306,6 +5306,17 @@ il_mac_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	if (changes & BSS_CHANGED_BSSID) {
 		D_MAC80211("BSSID %pM\n", bss_conf->bssid);
 
+		/*
+		 * On passive channel we wait with blocked queues to see if
+		 * there is traffic on that channel. If no frame will be
+		 * received (what is very unlikely since scan detects AP on
+		 * that channel, but theoretically possible), mac80211 associate
+		 * procedure will time out and mac80211 will call us with NULL
+		 * bssid. We have to unblock queues on such condition.
+		 */
+		if (is_zero_ether_addr(bss_conf->bssid))
+			il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
+
 		/*
 		 * If there is currently a HW scan going on in the background,
 		 * then we need to cancel it, otherwise sometimes we are not
-- 
cgit v1.2.3


From c72456c75ae48d4d747c2ad4f7fe82601484a949 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Wed, 12 Jun 2013 16:44:50 +0200
Subject: iwl3945: workaround for firmware frame tx rejection

Firmware can reject to transmit frame on passive channel, when it
did not yet received any frame with valid CRC on that channel.
Workaround this problem in the driver.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/3945.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlegacy/3945.c b/drivers/net/wireless/iwlegacy/3945.c
index dc1e6da9976a..c092033945cc 100644
--- a/drivers/net/wireless/iwlegacy/3945.c
+++ b/drivers/net/wireless/iwlegacy/3945.c
@@ -331,6 +331,19 @@ il3945_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb)
 		return;
 	}
 
+	/*
+	 * Firmware will not transmit frame on passive channel, if it not yet
+	 * received some valid frame on that channel. When this error happen
+	 * we have to wait until firmware will unblock itself i.e. when we
+	 * note received beacon or other frame. We unblock queues in
+	 * il3945_pass_packet_to_mac80211 or in il_mac_bss_info_changed.
+	 */
+	if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) &&
+	    il->iw_mode == NL80211_IFTYPE_STATION) {
+		il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
+		D_INFO("Stopped queues - RX waiting on passive channel\n");
+	}
+
 	txq->time_stamp = jiffies;
 	info = IEEE80211_SKB_CB(txq->skbs[txq->q.read_ptr]);
 	ieee80211_tx_info_clear_status(info);
@@ -488,6 +501,11 @@ il3945_pass_packet_to_mac80211(struct il_priv *il, struct il_rx_buf *rxb,
 		return;
 	}
 
+	if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) {
+		il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
+		D_INFO("Woke queues - frame received on passive channel\n");
+	}
+
 	skb = dev_alloc_skb(128);
 	if (!skb) {
 		IL_ERR("dev_alloc_skb failed\n");
-- 
cgit v1.2.3


From d5346171d721bcfaab5843bf996ac6a379f7bd93 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Wed, 12 Jun 2013 16:48:25 +0200
Subject: Revert "iwl4965: workaround connection regression on passive channel"

This reverts commit dd9c46408fdc07098333655ff27edf8cac8d9fcf.

With "iwl{4965,3495): workaround for firmware frame tx rejection"
patches we can enable IEEE80211_HW_REPORTS_TX_ACK_STATUS again.

Tested-by: Jake Edge <jake@lwn.net>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/4965-mac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c
index 1c44bb59f6c8..d287fd2dce42 100644
--- a/drivers/net/wireless/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -5759,7 +5759,8 @@ il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length)
 	hw->flags =
 	    IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_AMPDU_AGGREGATION |
 	    IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SPECTRUM_MGMT |
-	    IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
+	    IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS |
+	    IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
 	if (il->cfg->sku & IL_SKU_N)
 		hw->flags |=
 		    IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
-- 
cgit v1.2.3


From fa587d4b2f968b3719190a668a8707989855228d Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Thu, 6 Jun 2013 13:18:03 +0200
Subject: brcmfmac: Always use fifo_credits, also for requested credits.

Currently firmware requested credits do not require fifo credits.
From a buffer management point of view this is incorrect. So
firwmware requested credits require also fifo credits before the
packet can be transferred to the host.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c  |  10 +-
 drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h  |   3 +-
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 163 +++++++++------------
 3 files changed, 79 insertions(+), 97 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c
index 202869cd0932..ce50686a86c8 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c
@@ -179,11 +179,11 @@ ssize_t brcmf_debugfs_fws_stats_read(struct file *f, char __user *data,
 			fwstats->send_pkts[0], fwstats->send_pkts[1],
 			fwstats->send_pkts[2], fwstats->send_pkts[3],
 			fwstats->send_pkts[4],
-			fwstats->fifo_credits_sent[0],
-			fwstats->fifo_credits_sent[1],
-			fwstats->fifo_credits_sent[2],
-			fwstats->fifo_credits_sent[3],
-			fwstats->fifo_credits_sent[4]);
+			fwstats->requested_sent[0],
+			fwstats->requested_sent[1],
+			fwstats->requested_sent[2],
+			fwstats->requested_sent[3],
+			fwstats->requested_sent[4]);
 
 	return simple_read_from_buffer(data, count, ppos, buf, res);
 }
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h
index 009c87bfd9ae..451ebac09520 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h
@@ -141,8 +141,7 @@ struct brcmf_fws_stats {
 	u32 header_pulls;
 	u32 pkt2bus;
 	u32 send_pkts[5];
-	u32 fifo_credits_sent[5];
-	u32 fifo_credits_back[6];
+	u32 requested_sent[5];
 	u32 generic_error;
 	u32 mac_update_failed;
 	u32 mac_ps_update_failed;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index ff920601898c..79d60a658a67 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -192,24 +192,21 @@ struct brcmf_skbuff_cb {
 /*
  * sk_buff control if flags
  *
- *	b[12]  - packet sent upon credit request.
- *	b[11]  - packet sent upon packet request.
+ *	b[11]  - packet sent upon firmware request.
  *	b[10]  - packet only contains signalling data.
  *	b[9]   - packet is a tx packet.
- *	b[8]   - packet uses FIFO credit (non-pspoll).
+ *	b[8]   - packet used requested credit
  *	b[7]   - interface in AP mode.
  *	b[3:0] - interface index.
  */
-#define BRCMF_SKB_IF_FLAGS_REQ_CREDIT_MASK	0x1000
-#define BRCMF_SKB_IF_FLAGS_REQ_CREDIT_SHIFT	12
 #define BRCMF_SKB_IF_FLAGS_REQUESTED_MASK	0x0800
 #define BRCMF_SKB_IF_FLAGS_REQUESTED_SHIFT	11
 #define BRCMF_SKB_IF_FLAGS_SIGNAL_ONLY_MASK	0x0400
 #define BRCMF_SKB_IF_FLAGS_SIGNAL_ONLY_SHIFT	10
 #define BRCMF_SKB_IF_FLAGS_TRANSMIT_MASK        0x0200
 #define BRCMF_SKB_IF_FLAGS_TRANSMIT_SHIFT	9
-#define BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK	0x0100
-#define BRCMF_SKB_IF_FLAGS_CREDITCHECK_SHIFT	8
+#define BRCMF_SKB_IF_FLAGS_REQ_CREDIT_MASK	0x0100
+#define BRCMF_SKB_IF_FLAGS_REQ_CREDIT_SHIFT	8
 #define BRCMF_SKB_IF_FLAGS_IF_AP_MASK		0x0080
 #define BRCMF_SKB_IF_FLAGS_IF_AP_SHIFT		7
 #define BRCMF_SKB_IF_FLAGS_INDEX_MASK		0x000f
@@ -311,12 +308,15 @@ enum brcmf_fws_fifo {
  *	firmware suppress the packet as device is already in PS mode.
  * @BRCMF_FWS_TXSTATUS_FW_TOSSED:
  *	firmware tossed the packet.
+ * @BRCMF_FWS_TXSTATUS_HOST_TOSSED:
+ *	host tossed the packet.
  */
 enum brcmf_fws_txstatus {
 	BRCMF_FWS_TXSTATUS_DISCARD,
 	BRCMF_FWS_TXSTATUS_CORE_SUPPRESS,
 	BRCMF_FWS_TXSTATUS_FW_PS_SUPPRESS,
-	BRCMF_FWS_TXSTATUS_FW_TOSSED
+	BRCMF_FWS_TXSTATUS_FW_TOSSED,
+	BRCMF_FWS_TXSTATUS_HOST_TOSSED
 };
 
 enum brcmf_fws_fcmode {
@@ -639,6 +639,7 @@ static void brcmf_fws_init_mac_descriptor(struct brcmf_fws_mac_descriptor *desc,
 	desc->occupied = 1;
 	desc->state = BRCMF_FWS_STATE_OPEN;
 	desc->requested_credit = 0;
+	desc->requested_packet = 0;
 	/* depending on use may need ifp->bssidx instead */
 	desc->interface_id = ifidx;
 	desc->ac_bitmap = 0xff; /* update this when handling APSD */
@@ -654,6 +655,7 @@ void brcmf_fws_clear_mac_descriptor(struct brcmf_fws_mac_descriptor *desc)
 	desc->occupied = 0;
 	desc->state = BRCMF_FWS_STATE_CLOSE;
 	desc->requested_credit = 0;
+	desc->requested_packet = 0;
 }
 
 static struct brcmf_fws_mac_descriptor *
@@ -1050,35 +1052,35 @@ static int brcmf_fws_request_indicate(struct brcmf_fws_info *fws, u8 type,
 	return BRCMF_FWS_RET_OK_SCHEDULE;
 }
 
-static int brcmf_fws_macdesc_use_credit(struct brcmf_fws_mac_descriptor *entry,
-					struct sk_buff *skb)
+static void
+brcmf_fws_macdesc_use_req_credit(struct brcmf_fws_mac_descriptor *entry,
+				 struct sk_buff *skb)
 {
-	int use_credit = 1;
-
-	if (entry->state == BRCMF_FWS_STATE_CLOSE) {
-		if (entry->requested_credit > 0) {
-			/*
-			 * if the packet was pulled out while destination is in
-			 * closed state but had a non-zero packets requested,
-			 * then this should not count against the FIFO credit.
-			 * That is due to the fact that the firmware will
-			 * most likely hold onto this packet until a suitable
-			 * time later to push it to the appropriate AC FIFO.
-			 */
-			entry->requested_credit--;
-			brcmf_skb_if_flags_set_field(skb, REQ_CREDIT, 1);
-			use_credit = 0;
-		} else if (entry->requested_packet > 0) {
-			entry->requested_packet--;
-			brcmf_skb_if_flags_set_field(skb, REQUESTED, 1);
-			use_credit = 0;
-		}
+	if (entry->requested_credit > 0) {
+		entry->requested_credit--;
+		brcmf_skb_if_flags_set_field(skb, REQUESTED, 1);
+		brcmf_skb_if_flags_set_field(skb, REQ_CREDIT, 1);
+		if (entry->state != BRCMF_FWS_STATE_CLOSE)
+			brcmf_err("requested credit set while mac not closed!\n");
+	} else if (entry->requested_packet > 0) {
+		entry->requested_packet--;
+		brcmf_skb_if_flags_set_field(skb, REQUESTED, 1);
+		brcmf_skb_if_flags_set_field(skb, REQ_CREDIT, 0);
+		if (entry->state != BRCMF_FWS_STATE_CLOSE)
+			brcmf_err("requested packet set while mac not closed!\n");
 	} else {
-		WARN_ON(entry->requested_credit);
-		WARN_ON(entry->requested_packet);
+		brcmf_skb_if_flags_set_field(skb, REQUESTED, 0);
+		brcmf_skb_if_flags_set_field(skb, REQ_CREDIT, 0);
 	}
-	brcmf_skb_if_flags_set_field(skb, CREDITCHECK, use_credit);
-	return use_credit;
+}
+
+static void brcmf_fws_macdesc_return_req_credit(struct sk_buff *skb)
+{
+	struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac;
+
+	if ((brcmf_skb_if_flags_get_field(skb, REQ_CREDIT)) &&
+	    (entry->state == BRCMF_FWS_STATE_CLOSE))
+		entry->requested_credit++;
 }
 
 static void brcmf_fws_return_credits(struct brcmf_fws_info *fws,
@@ -1124,25 +1126,6 @@ static void brcmf_fws_schedule_deq(struct brcmf_fws_info *fws)
 		queue_work(fws->fws_wq, &fws->fws_dequeue_work);
 }
 
-static void brcmf_fws_skb_pickup_credit(struct brcmf_fws_info *fws, int fifo,
-				     struct sk_buff *p)
-{
-	struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(p)->mac;
-
-	if (brcmf_skbcb(p)->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK)
-		brcmf_fws_return_credits(fws, fifo, 1);
-	else if (brcmf_skb_if_flags_get_field(p, REQ_CREDIT) &&
-		 entry->state == BRCMF_FWS_STATE_CLOSE)
-		/*
-		 * if this packet did not count against FIFO credit, it
-		 * could have taken a requested_credit from the destination
-		 * entry (for pspoll etc.)
-		 */
-		entry->requested_credit++;
-
-	brcmf_fws_schedule_deq(fws);
-}
-
 static int brcmf_fws_enq(struct brcmf_fws_info *fws,
 			 enum brcmf_fws_skb_state state, int fifo,
 			 struct sk_buff *p)
@@ -1224,7 +1207,7 @@ static struct sk_buff *brcmf_fws_deq(struct brcmf_fws_info *fws, int fifo)
 		if  (p == NULL)
 			continue;
 
-		brcmf_fws_macdesc_use_credit(entry, p);
+		brcmf_fws_macdesc_use_req_credit(entry, p);
 
 		/* move dequeue position to ensure fair round-robin */
 		fws->deq_node_pos[fifo] = (node_pos + i + 1) % num_nodes;
@@ -1313,7 +1296,8 @@ brcmf_fws_txs_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot,
 	} else if (flags == BRCMF_FWS_TXSTATUS_FW_PS_SUPPRESS) {
 		fws->stats.txs_supp_ps++;
 		remove_from_hanger = false;
-	} else if (flags == BRCMF_FWS_TXSTATUS_FW_TOSSED)
+	} else if ((flags == BRCMF_FWS_TXSTATUS_FW_TOSSED) ||
+		   (flags == BRCMF_FWS_TXSTATUS_HOST_TOSSED))
 		fws->stats.txs_tossed++;
 	else
 		brcmf_err("unexpected txstatus\n");
@@ -1340,9 +1324,13 @@ brcmf_fws_txs_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot,
 
 	/* pick up the implicit credit from this packet */
 	fifo = brcmf_skb_htod_tag_get_field(skb, FIFO);
-	if (fws->fcmode == BRCMF_FWS_FCMODE_IMPLIED_CREDIT ||
-	    !(brcmf_skbcb(skb)->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK))
-		brcmf_fws_skb_pickup_credit(fws, fifo, skb);
+	if ((fws->fcmode == BRCMF_FWS_FCMODE_IMPLIED_CREDIT) ||
+	    (brcmf_skb_if_flags_get_field(skb, REQ_CREDIT)) ||
+	    (flags == BRCMF_FWS_TXSTATUS_HOST_TOSSED)) {
+		brcmf_fws_return_credits(fws, fifo, 1);
+		brcmf_fws_schedule_deq(fws);
+	}
+	brcmf_fws_macdesc_return_req_credit(skb);
 
 	if (!remove_from_hanger)
 		ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, genbit);
@@ -1588,7 +1576,7 @@ static int brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
 	brcmf_skb_htod_tag_set_field(p, FIFO, fifo);
 	brcmf_skb_htod_tag_set_field(p, GENERATION, entry->generation);
 	flags = BRCMF_FWS_HTOD_FLAG_PKTFROMHOST;
-	if (!(skcb->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK)) {
+	if (brcmf_skb_if_flags_get_field(p, REQUESTED)) {
 		/*
 		 * Indicate that this packet is being sent in response to an
 		 * explicit request from the firmware side.
@@ -1636,6 +1624,7 @@ brcmf_fws_rollback_toq(struct brcmf_fws_info *fws,
 
 	state = brcmf_skbcb(skb)->state;
 	entry = brcmf_skbcb(skb)->mac;
+	hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT);
 
 	if (entry != NULL) {
 		if (state == BRCMF_FWS_SKBSTATE_SUPPRESSED) {
@@ -1647,8 +1636,6 @@ brcmf_fws_rollback_toq(struct brcmf_fws_info *fws,
 				rc = -ENOSPC;
 			}
 		} else {
-			hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT);
-
 			/* delay-q packets are going to delay-q */
 			pktout = brcmu_pktq_penq_head(&entry->psq,
 						      2 * fifo, skb);
@@ -1670,11 +1657,13 @@ brcmf_fws_rollback_toq(struct brcmf_fws_info *fws,
 	}
 
 	if (rc) {
-		brcmf_fws_bustxfail(fws, skb);
 		fws->stats.rollback_failed++;
+		brcmf_fws_txs_process(fws, BRCMF_FWS_TXSTATUS_HOST_TOSSED,
+				      hslot, 0);
 	} else {
 		fws->stats.rollback_success++;
-		brcmf_fws_skb_pickup_credit(fws, fifo, skb);
+		brcmf_fws_return_credits(fws, fifo, 1);
+		brcmf_fws_macdesc_return_req_credit(skb);
 	}
 }
 
@@ -1708,26 +1697,28 @@ static int brcmf_fws_consume_credit(struct brcmf_fws_info *fws, int fifo,
 	struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac;
 	int *credit = &fws->fifo_credit[fifo];
 
-	if (!brcmf_fws_macdesc_use_credit(entry, skb))
-		return 0;
-
 	if (fifo != BRCMF_FWS_FIFO_AC_BE)
 		fws->borrow_defer_timestamp = jiffies +
 					      BRCMF_FWS_BORROW_DEFER_PERIOD;
 
 	if (!(*credit)) {
 		/* Try to borrow a credit from other queue */
-		if (fifo == BRCMF_FWS_FIFO_AC_BE &&
-		    brcmf_fws_borrow_credit(fws) == 0)
-			return 0;
-
-		brcmf_dbg(DATA, "exit: ac=%d, credits depleted\n", fifo);
-		return -ENAVAIL;
+		if (fifo != BRCMF_FWS_FIFO_AC_BE ||
+		    (brcmf_fws_borrow_credit(fws) != 0)) {
+			brcmf_dbg(DATA, "ac=%d, credits depleted\n", fifo);
+			return -ENAVAIL;
+		}
+	} else {
+		(*credit)--;
+		if (!(*credit))
+			fws->fifo_credit_map &= ~(1 << fifo);
 	}
-	(*credit)--;
-	if (!(*credit))
-		fws->fifo_credit_map &= ~(1 << fifo);
-	brcmf_dbg(DATA, "exit: ac=%d, credits=%d\n", fifo, *credit);
+
+	brcmf_fws_macdesc_use_req_credit(entry, skb);
+
+	brcmf_dbg(DATA, "ac=%d, credits=%02d:%02d:%02d:%02d\n", fifo,
+		  fws->fifo_credit[0], fws->fifo_credit[1],
+		  fws->fifo_credit[2], fws->fifo_credit[3]);
 	return 0;
 }
 
@@ -1764,8 +1755,8 @@ static int brcmf_fws_commit_skb(struct brcmf_fws_info *fws, int fifo,
 	entry->seq[fifo]++;
 	fws->stats.pkt2bus++;
 	fws->stats.send_pkts[fifo]++;
-	if (brcmf_skbcb(skb)->if_flags & BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK)
-		fws->stats.fifo_credits_sent[fifo]++;
+	if (brcmf_skb_if_flags_get_field(skb, REQUESTED))
+		fws->stats.requested_sent[fifo]++;
 
 	return rc;
 
@@ -1888,10 +1879,7 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker)
 			skb = brcmf_fws_deq(fws, fifo);
 			if (!skb)
 				break;
-			if (brcmf_skbcb(skb)->if_flags &
-			    BRCMF_SKB_IF_FLAGS_CREDITCHECK_MASK)
-				fws->fifo_credit[fifo]--;
-
+			fws->fifo_credit[fifo]--;
 			if (brcmf_fws_commit_skb(fws, fifo, skb))
 				break;
 			if (fws->bus_flow_blocked)
@@ -2023,20 +2011,15 @@ bool brcmf_fws_fc_active(struct brcmf_fws_info *fws)
 void brcmf_fws_bustxfail(struct brcmf_fws_info *fws, struct sk_buff *skb)
 {
 	ulong flags;
-	int fifo;
+	u32 hslot;
 
 	if (brcmf_skbcb(skb)->state == BRCMF_FWS_SKBSTATE_TIM) {
 		brcmu_pkt_buf_free_skb(skb);
 		return;
 	}
 	brcmf_fws_lock(fws->drvr, flags);
-	brcmf_fws_txs_process(fws, BRCMF_FWS_TXSTATUS_FW_TOSSED,
-				   brcmf_skb_htod_tag_get_field(skb, HSLOT), 0);
-	/* the packet never reached firmware so reclaim credit */
-	if (fws->fcmode == BRCMF_FWS_FCMODE_EXPLICIT_CREDIT) {
-		fifo = brcmf_skb_htod_tag_get_field(skb, FIFO);
-		brcmf_fws_skb_pickup_credit(fws, fifo, skb);
-	}
+	hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT);
+	brcmf_fws_txs_process(fws, BRCMF_FWS_TXSTATUS_HOST_TOSSED, hslot, 0);
 	brcmf_fws_unlock(fws->drvr, flags);
 }
 
-- 
cgit v1.2.3


From 5631becbb8703d73239e097d222b183aa4f24e40 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 6 Jun 2013 13:18:07 +0200
Subject: brcmfmac: add debugfs statistics for firmware-signalling

Added statistics for flow-control and packets dropped by the
driver.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c  |  8 +++++++-
 drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h  |  3 +++
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 13 +++++++++----
 3 files changed, 19 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c
index ce50686a86c8..c37b9d68e458 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c
@@ -156,8 +156,11 @@ ssize_t brcmf_debugfs_fws_stats_read(struct file *f, char __user *data,
 			"txs_suppr_core:    %u\n"
 			"txs_suppr_ps:      %u\n"
 			"txs_tossed:        %u\n"
+			"txs_host_tossed:   %u\n"
+			"bus_flow_block:    %u\n"
+			"fws_flow_block:    %u\n"
 			"send_pkts:         BK:%u BE:%u VO:%u VI:%u BCMC:%u\n"
-			"fifo_credits_sent: BK:%u BE:%u VO:%u VI:%u BCMC:%u\n",
+			"requested_sent:    BK:%u BE:%u VO:%u VI:%u BCMC:%u\n",
 			fwstats->header_pulls,
 			fwstats->header_only_pkt,
 			fwstats->tlv_parse_failed,
@@ -176,6 +179,9 @@ ssize_t brcmf_debugfs_fws_stats_read(struct file *f, char __user *data,
 			fwstats->txs_supp_core,
 			fwstats->txs_supp_ps,
 			fwstats->txs_tossed,
+			fwstats->txs_host_tossed,
+			fwstats->bus_flow_block,
+			fwstats->fws_flow_block,
 			fwstats->send_pkts[0], fwstats->send_pkts[1],
 			fwstats->send_pkts[2], fwstats->send_pkts[3],
 			fwstats->send_pkts[4],
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h
index 451ebac09520..0af1f5dc583a 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h
@@ -157,6 +157,9 @@ struct brcmf_fws_stats {
 	u32 txs_supp_core;
 	u32 txs_supp_ps;
 	u32 txs_tossed;
+	u32 txs_host_tossed;
+	u32 bus_flow_block;
+	u32 fws_flow_block;
 };
 
 struct brcmf_pub;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index 79d60a658a67..70f70cea7f7d 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -584,7 +584,7 @@ static int brcmf_fws_hanger_mark_suppressed(struct brcmf_fws_hanger *h,
 	if (slot_id >= BRCMF_FWS_HANGER_MAXITEMS)
 		return -ENOENT;
 
-	if (h->items[slot_id].state != BRCMF_FWS_HANGER_ITEM_STATE_INUSE) {
+	if (h->items[slot_id].state == BRCMF_FWS_HANGER_ITEM_STATE_FREE) {
 		brcmf_err("entry not in use\n");
 		return -EINVAL;
 	}
@@ -894,8 +894,10 @@ brcmf_fws_flow_control_check(struct brcmf_fws_info *fws, struct pktq *pq,
 		brcmf_txflowblock_if(ifp,
 				     BRCMF_NETIF_STOP_REASON_FWS_FC, false);
 	if (!(ifp->netif_stop & BRCMF_NETIF_STOP_REASON_FWS_FC) &&
-	    pq->len >= BRCMF_FWS_FLOWCONTROL_HIWATER)
+	    pq->len >= BRCMF_FWS_FLOWCONTROL_HIWATER) {
+		fws->stats.fws_flow_block++;
 		brcmf_txflowblock_if(ifp, BRCMF_NETIF_STOP_REASON_FWS_FC, true);
+	}
 	return;
 }
 
@@ -1296,9 +1298,10 @@ brcmf_fws_txs_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot,
 	} else if (flags == BRCMF_FWS_TXSTATUS_FW_PS_SUPPRESS) {
 		fws->stats.txs_supp_ps++;
 		remove_from_hanger = false;
-	} else if ((flags == BRCMF_FWS_TXSTATUS_FW_TOSSED) ||
-		   (flags == BRCMF_FWS_TXSTATUS_HOST_TOSSED))
+	} else if (flags == BRCMF_FWS_TXSTATUS_FW_TOSSED)
 		fws->stats.txs_tossed++;
+	else if (flags == BRCMF_FWS_TXSTATUS_HOST_TOSSED)
+		fws->stats.txs_host_tossed++;
 	else
 		brcmf_err("unexpected txstatus\n");
 
@@ -2030,4 +2033,6 @@ void brcmf_fws_bus_blocked(struct brcmf_pub *drvr, bool flow_blocked)
 	fws->bus_flow_blocked = flow_blocked;
 	if (!flow_blocked)
 		brcmf_fws_schedule_deq(fws);
+	else
+		fws->stats.bus_flow_block++;
 }
-- 
cgit v1.2.3


From 68972c46f2975d3d61f9dc9f311f77bfc8a8b12b Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 11 Jun 2013 19:05:27 +0200
Subject: iwlwifi: make TX seqno validation more efficient

Accessing the device in Tx path is not a good idea.
Mirror the data in DRAM.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/internal.h |  2 ++
 drivers/net/wireless/iwlwifi/pcie/tx.c       | 10 +++++-----
 2 files changed, 7 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h
index 148843e7f34f..b654dcdd048a 100644
--- a/drivers/net/wireless/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/iwlwifi/pcie/internal.h
@@ -217,6 +217,7 @@ struct iwl_pcie_txq_scratch_buf {
  * @trans_pcie: pointer back to transport (for timer)
  * @need_update: indicates need to update read/write index
  * @active: stores if queue is active
+ * @ampdu: true if this queue is an ampdu queue for an specific RA/TID
  *
  * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
  * descriptors) and required locking structures.
@@ -232,6 +233,7 @@ struct iwl_txq {
 	struct iwl_trans_pcie *trans_pcie;
 	u8 need_update;
 	u8 active;
+	bool ampdu;
 };
 
 static inline dma_addr_t
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index f65da1984d91..b8f3cb78382b 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -1073,6 +1073,7 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo,
 
 		/* enable aggregations for the queue */
 		iwl_set_bits_prph(trans, SCD_AGGR_SEL, BIT(txq_id));
+		trans_pcie->txq[txq_id].ampdu = true;
 	} else {
 		/*
 		 * disable aggregations for the queue, this will also make the
@@ -1129,6 +1130,7 @@ void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int txq_id)
 			    ARRAY_SIZE(zero_val));
 
 	iwl_pcie_txq_unmap(trans, txq_id);
+	trans_pcie->txq[txq_id].ampdu = false;
 
 	IWL_DEBUG_TX_QUEUES(trans, "Deactivate queue %d\n", txq_id);
 }
@@ -1599,7 +1601,7 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
 	u8 wait_write_ptr = 0;
 	__le16 fc = hdr->frame_control;
 	u8 hdr_len = ieee80211_hdrlen(fc);
-	u16 __maybe_unused wifi_seq;
+	u16 wifi_seq;
 
 	txq = &trans_pcie->txq[txq_id];
 	q = &txq->q;
@@ -1616,13 +1618,11 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
 	 * the BA.
 	 * Check here that the packets are in the right place on the ring.
 	 */
-#ifdef CONFIG_IWLWIFI_DEBUG
 	wifi_seq = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
-	WARN_ONCE((iwl_read_prph(trans, SCD_AGGR_SEL) & BIT(txq_id)) &&
-		  ((wifi_seq & 0xff) != q->write_ptr),
+	WARN_ONCE(trans_pcie->txq[txq_id].ampdu &&
+		  (wifi_seq & 0xff) != q->write_ptr,
 		  "Q: %d WiFi Seq %d tfdNum %d",
 		  txq_id, wifi_seq, q->write_ptr);
-#endif
 
 	/* Set up driver data for this TFD */
 	txq->entries[q->write_ptr].skb = skb;
-- 
cgit v1.2.3


From 01911dab97cb3e21e640aaca82689acec00ed848 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 11 Jun 2013 21:12:29 +0200
Subject: iwlwifi: pcie: don't read INTA register in ICT IRQ handler

There's no reason to read the INTA register in the ICT IRQ
handler, this interrupt mechanism is designed to not have
to read as many registers as the regular one. Not reading
the INTA register gives a significant performance/CPU use
improvement.

Since we still want to get this info, fetch it only if
the ISR debug level is enabled.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/rx.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c
index 567e67ad1f61..63ba21e51f8d 100644
--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -1198,7 +1198,7 @@ irqreturn_t iwl_pcie_isr_ict(int irq, void *data)
 {
 	struct iwl_trans *trans = data;
 	struct iwl_trans_pcie *trans_pcie;
-	u32 inta, inta_mask;
+	u32 inta;
 	u32 val = 0;
 	u32 read;
 	unsigned long flags;
@@ -1226,7 +1226,6 @@ irqreturn_t iwl_pcie_isr_ict(int irq, void *data)
 	 * If we have something to service, the tasklet will re-enable ints.
 	 * If we *don't* have something, we'll re-enable before leaving here.
 	 */
-	inta_mask = iwl_read32(trans, CSR_INT_MASK);
 	iwl_write32(trans, CSR_INT_MASK, 0x00000000);
 
 	/* Ignore interrupt if there's nothing in NIC to service.
@@ -1271,8 +1270,13 @@ irqreturn_t iwl_pcie_isr_ict(int irq, void *data)
 		val |= 0x8000;
 
 	inta = (0xff & val) | ((0xff00 & val) << 16);
-	IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n",
-		      inta, inta_mask, val);
+	IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled(sw) 0x%08x ict 0x%08x\n",
+		      inta, trans_pcie->inta_mask, val);
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (iwl_have_debug_level(IWL_DL_ISR))
+		IWL_DEBUG_ISR(trans, "enabled(hw) 0x%08x\n",
+			      iwl_read32(trans, CSR_INT_MASK));
+#endif
 
 	inta &= trans_pcie->inta_mask;
 	trans_pcie->inta |= inta;
-- 
cgit v1.2.3


From b002c7e1f327bb56fe068bf76fd7179b1b490e02 Mon Sep 17 00:00:00 2001
From: Oren Givon <oren.givon@intel.com>
Date: Wed, 12 Jun 2013 20:37:03 +0300
Subject: iwlwifi: mvm: removed an unused parameter from a function

Remove the unused iwl_mvm *mvm parameter from the
iwl_mvm_send_remote_wake_cfg function in D3.c.

Signed-off-by: Oren Givon <oren.givon@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/d3.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c
index 7a2ef3f013fd..8c49db02c9c1 100644
--- a/drivers/net/wireless/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/iwlwifi/mvm/d3.c
@@ -420,8 +420,7 @@ static __le16 pseudo_hdr_check(int len, __be32 saddr, __be32 daddr)
 	return cpu_to_le16(be16_to_cpu((__force __be16)check));
 }
 
-static void iwl_mvm_build_tcp_packet(struct iwl_mvm *mvm,
-				     struct ieee80211_vif *vif,
+static void iwl_mvm_build_tcp_packet(struct ieee80211_vif *vif,
 				     struct cfg80211_wowlan_tcp *tcp,
 				     void *_pkt, u8 *mask,
 				     __le16 *pseudo_hdr_csum,
@@ -567,21 +566,21 @@ static int iwl_mvm_send_remote_wake_cfg(struct iwl_mvm *mvm,
 
 	/* SYN (TX) */
 	iwl_mvm_build_tcp_packet(
-		mvm, vif, tcp, cfg->syn_tx.data, NULL,
+		vif, tcp, cfg->syn_tx.data, NULL,
 		&cfg->syn_tx.info.tcp_pseudo_header_checksum,
 		MVM_TCP_TX_SYN);
 	cfg->syn_tx.info.tcp_payload_length = 0;
 
 	/* SYN/ACK (RX) */
 	iwl_mvm_build_tcp_packet(
-		mvm, vif, tcp, cfg->synack_rx.data, cfg->synack_rx.rx_mask,
+		vif, tcp, cfg->synack_rx.data, cfg->synack_rx.rx_mask,
 		&cfg->synack_rx.info.tcp_pseudo_header_checksum,
 		MVM_TCP_RX_SYNACK);
 	cfg->synack_rx.info.tcp_payload_length = 0;
 
 	/* KEEPALIVE/ACK (TX) */
 	iwl_mvm_build_tcp_packet(
-		mvm, vif, tcp, cfg->keepalive_tx.data, NULL,
+		vif, tcp, cfg->keepalive_tx.data, NULL,
 		&cfg->keepalive_tx.info.tcp_pseudo_header_checksum,
 		MVM_TCP_TX_DATA);
 	cfg->keepalive_tx.info.tcp_payload_length =
@@ -605,7 +604,7 @@ static int iwl_mvm_send_remote_wake_cfg(struct iwl_mvm *mvm,
 
 	/* ACK (RX) */
 	iwl_mvm_build_tcp_packet(
-		mvm, vif, tcp, cfg->keepalive_ack_rx.data,
+		vif, tcp, cfg->keepalive_ack_rx.data,
 		cfg->keepalive_ack_rx.rx_mask,
 		&cfg->keepalive_ack_rx.info.tcp_pseudo_header_checksum,
 		MVM_TCP_RX_ACK);
@@ -613,7 +612,7 @@ static int iwl_mvm_send_remote_wake_cfg(struct iwl_mvm *mvm,
 
 	/* WAKEUP (RX) */
 	iwl_mvm_build_tcp_packet(
-		mvm, vif, tcp, cfg->wake_rx.data, cfg->wake_rx.rx_mask,
+		vif, tcp, cfg->wake_rx.data, cfg->wake_rx.rx_mask,
 		&cfg->wake_rx.info.tcp_pseudo_header_checksum,
 		MVM_TCP_RX_WAKE);
 	cfg->wake_rx.info.tcp_payload_length =
@@ -621,7 +620,7 @@ static int iwl_mvm_send_remote_wake_cfg(struct iwl_mvm *mvm,
 
 	/* FIN */
 	iwl_mvm_build_tcp_packet(
-		mvm, vif, tcp, cfg->fin_tx.data, NULL,
+		vif, tcp, cfg->fin_tx.data, NULL,
 		&cfg->fin_tx.info.tcp_pseudo_header_checksum,
 		MVM_TCP_TX_FIN);
 	cfg->fin_tx.info.tcp_payload_length = 0;
-- 
cgit v1.2.3


From 12dcf2c3325a8aa25e8634b7e8337aad6f9be9b7 Mon Sep 17 00:00:00 2001
From: David Spinadel <david.spinadel@intel.com>
Date: Wed, 12 Jun 2013 16:58:04 +0300
Subject: iwlwifi: remove calib channel section from PHY DB

Remove calibration per-channel data as it's no longer used.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-phy-db.c | 36 +++----------------------------
 1 file changed, 3 insertions(+), 33 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-phy-db.c b/drivers/net/wireless/iwlwifi/iwl-phy-db.c
index 84acb4deca8a..1a405ae6a9c5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-phy-db.c
+++ b/drivers/net/wireless/iwlwifi/iwl-phy-db.c
@@ -92,20 +92,16 @@ struct iwl_phy_db_entry {
 struct iwl_phy_db {
 	struct iwl_phy_db_entry	cfg;
 	struct iwl_phy_db_entry	calib_nch;
-	struct iwl_phy_db_entry	calib_ch;
 	struct iwl_phy_db_entry	calib_ch_group_papd[IWL_NUM_PAPD_CH_GROUPS];
 	struct iwl_phy_db_entry	calib_ch_group_txp[IWL_NUM_TXP_CH_GROUPS];
 
-	u32 channel_num;
-	u32 channel_size;
-
 	struct iwl_trans *trans;
 };
 
 enum iwl_phy_db_section_type {
 	IWL_PHY_DB_CFG = 1,
 	IWL_PHY_DB_CALIB_NCH,
-	IWL_PHY_DB_CALIB_CH,
+	IWL_PHY_DB_UNUSED,
 	IWL_PHY_DB_CALIB_CHG_PAPD,
 	IWL_PHY_DB_CALIB_CHG_TXP,
 	IWL_PHY_DB_MAX
@@ -169,8 +165,6 @@ iwl_phy_db_get_section(struct iwl_phy_db *phy_db,
 		return &phy_db->cfg;
 	case IWL_PHY_DB_CALIB_NCH:
 		return &phy_db->calib_nch;
-	case IWL_PHY_DB_CALIB_CH:
-		return &phy_db->calib_ch;
 	case IWL_PHY_DB_CALIB_CHG_PAPD:
 		if (chg_id >= IWL_NUM_PAPD_CH_GROUPS)
 			return NULL;
@@ -208,7 +202,6 @@ void iwl_phy_db_free(struct iwl_phy_db *phy_db)
 
 	iwl_phy_db_free_section(phy_db, IWL_PHY_DB_CFG, 0);
 	iwl_phy_db_free_section(phy_db, IWL_PHY_DB_CALIB_NCH, 0);
-	iwl_phy_db_free_section(phy_db, IWL_PHY_DB_CALIB_CH, 0);
 	for (i = 0; i < IWL_NUM_PAPD_CH_GROUPS; i++)
 		iwl_phy_db_free_section(phy_db, IWL_PHY_DB_CALIB_CHG_PAPD, i);
 	for (i = 0; i < IWL_NUM_TXP_CH_GROUPS; i++)
@@ -248,13 +241,6 @@ int iwl_phy_db_set_section(struct iwl_phy_db *phy_db, struct iwl_rx_packet *pkt,
 
 	entry->size = size;
 
-	if (type == IWL_PHY_DB_CALIB_CH) {
-		phy_db->channel_num =
-			le32_to_cpup((__le32 *)phy_db_notif->data);
-		phy_db->channel_size =
-			(size - CHANNEL_NUM_SIZE) / phy_db->channel_num;
-	}
-
 	IWL_DEBUG_INFO(phy_db->trans,
 		       "%s(%d): [PHYDB]SET: Type %d , Size: %d\n",
 		       __func__, __LINE__, type, size);
@@ -328,10 +314,7 @@ int iwl_phy_db_get_section_data(struct iwl_phy_db *phy_db,
 				u32 type, u8 **data, u16 *size, u16 ch_id)
 {
 	struct iwl_phy_db_entry *entry;
-	u32 channel_num;
-	u32 channel_size;
 	u16 ch_group_id = 0;
-	u16 index;
 
 	if (!phy_db)
 		return -EINVAL;
@@ -346,21 +329,8 @@ int iwl_phy_db_get_section_data(struct iwl_phy_db *phy_db,
 	if (!entry)
 		return -EINVAL;
 
-	if (type == IWL_PHY_DB_CALIB_CH) {
-		index = ch_id_to_ch_index(ch_id);
-		channel_num = phy_db->channel_num;
-		channel_size = phy_db->channel_size;
-		if (index >= channel_num) {
-			IWL_ERR(phy_db->trans, "Wrong channel number %d\n",
-				ch_id);
-			return -EINVAL;
-		}
-		*data = entry->data + CHANNEL_NUM_SIZE + index * channel_size;
-		*size = channel_size;
-	} else {
-		*data = entry->data;
-		*size = entry->size;
-	}
+	*data = entry->data;
+	*size = entry->size;
 
 	IWL_DEBUG_INFO(phy_db->trans,
 		       "%s(%d): [PHYDB] GET: Type %d , Size: %d\n",
-- 
cgit v1.2.3


From 51cd53ad120f33410c48fd0d696e6f6255c8e780 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 12 Jun 2013 09:56:51 +0200
Subject: iwlwifi: reduce debug ifdefs using the optimiser

Instead of using #ifdef CONFIG_IWLWIFI_DEBUG, remove the
iwlwifi_mod_params.debug_level variable completely and
make iwl_have_debug_level() always return false in the
non-debug case. This way, the optimiser will elide all
code for it automatically without having to add #ifdefs.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/main.c      |  7 ------
 drivers/net/wireless/iwlwifi/iwl-debug.h     |  4 ++++
 drivers/net/wireless/iwlwifi/iwl-modparams.h |  2 ++
 drivers/net/wireless/iwlwifi/pcie/rx.c       | 36 ++++++++--------------------
 4 files changed, 16 insertions(+), 33 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
index 68f754659570..7aa9c8dc33ef 100644
--- a/drivers/net/wireless/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -1859,14 +1859,9 @@ int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
 		return pos;
 	}
 
-#ifdef CONFIG_IWLWIFI_DEBUG
 	if (!(iwl_have_debug_level(IWL_DL_FW_ERRORS)) && !full_log)
 		size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
 			? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
-#else
-	size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
-		? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
-#endif
 	IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
 		size);
 
@@ -1910,10 +1905,8 @@ static void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand)
 	unsigned int reload_msec;
 	unsigned long reload_jiffies;
 
-#ifdef CONFIG_IWLWIFI_DEBUG
 	if (iwl_have_debug_level(IWL_DL_FW_ERRORS))
 		iwl_print_rx_config_cmd(priv, IWL_RXON_CTX_BSS);
-#endif
 
 	/* uCode is no longer loaded. */
 	priv->ucode_loaded = false;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 8cf5db7fb5c9..7edb8519c8a4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -34,7 +34,11 @@
 
 static inline bool iwl_have_debug_level(u32 level)
 {
+#ifdef CONFIG_IWLWIFI_DEBUG
 	return iwlwifi_mod_params.debug_level & level;
+#else
+	return false;
+#endif
 }
 
 void __iwl_err(struct device *dev, bool rfkill_prefix, bool only_trace,
diff --git a/drivers/net/wireless/iwlwifi/iwl-modparams.h b/drivers/net/wireless/iwlwifi/iwl-modparams.h
index 36dfe0919f6b..d4ad505b0a4b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-modparams.h
+++ b/drivers/net/wireless/iwlwifi/iwl-modparams.h
@@ -115,7 +115,9 @@ struct iwl_mod_params {
 	int led_mode;
 	bool power_save;
 	int power_level;
+#ifdef CONFIG_IWLWIFI_DEBUG
 	u32 debug_level;
+#endif
 	int ant_coupling;
 	bool bt_ch_announce;
 	bool auto_agg;
diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c
index 63ba21e51f8d..3688dc5ba1ac 100644
--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -802,9 +802,6 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
 	u32 handled = 0;
 	unsigned long flags;
 	u32 i;
-#ifdef CONFIG_IWLWIFI_DEBUG
-	u32 inta_mask;
-#endif
 
 	lock_map_acquire(&trans->sync_cmd_lockdep_map);
 
@@ -826,14 +823,9 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
 
 	inta = trans_pcie->inta;
 
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (iwl_have_debug_level(IWL_DL_ISR)) {
-		/* just for debug */
-		inta_mask = iwl_read32(trans, CSR_INT_MASK);
+	if (iwl_have_debug_level(IWL_DL_ISR))
 		IWL_DEBUG_ISR(trans, "inta 0x%08x, enabled 0x%08x\n",
-			      inta, inta_mask);
-	}
-#endif
+			      inta, iwl_read32(trans, CSR_INT_MASK));
 
 	/* saved interrupt in inta variable now we can reset trans_pcie->inta */
 	trans_pcie->inta = 0;
@@ -855,12 +847,11 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
 		goto out;
 	}
 
-#ifdef CONFIG_IWLWIFI_DEBUG
 	if (iwl_have_debug_level(IWL_DL_ISR)) {
 		/* NIC fires this, but we don't use it, redundant with WAKEUP */
 		if (inta & CSR_INT_BIT_SCD) {
-			IWL_DEBUG_ISR(trans, "Scheduler finished to transmit "
-				      "the frame/frames.\n");
+			IWL_DEBUG_ISR(trans,
+				      "Scheduler finished to transmit the frame/frames.\n");
 			isr_stats->sch++;
 		}
 
@@ -870,7 +861,7 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
 			isr_stats->alive++;
 		}
 	}
-#endif
+
 	/* Safely ignore these bits for debug checks below */
 	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
 
@@ -1118,9 +1109,6 @@ static irqreturn_t iwl_pcie_isr(int irq, void *data)
 	struct iwl_trans *trans = data;
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	u32 inta, inta_mask;
-#ifdef CONFIG_IWLWIFI_DEBUG
-	u32 inta_fh;
-#endif
 
 	lockdep_assert_held(&trans_pcie->irq_lock);
 
@@ -1159,13 +1147,11 @@ static irqreturn_t iwl_pcie_isr(int irq, void *data)
 		return IRQ_HANDLED;
 	}
 
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (iwl_have_debug_level(IWL_DL_ISR)) {
-		inta_fh = iwl_read32(trans, CSR_FH_INT_STATUS);
-		IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled 0x%08x, "
-			      "fh 0x%08x\n", inta, inta_mask, inta_fh);
-	}
-#endif
+	if (iwl_have_debug_level(IWL_DL_ISR))
+		IWL_DEBUG_ISR(trans,
+			      "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
+			      inta, inta_mask,
+			      iwl_read32(trans, CSR_FH_INT_STATUS));
 
 	trans_pcie->inta |= inta;
 	/* the thread will service interrupts and re-enable them */
@@ -1272,11 +1258,9 @@ irqreturn_t iwl_pcie_isr_ict(int irq, void *data)
 	inta = (0xff & val) | ((0xff00 & val) << 16);
 	IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled(sw) 0x%08x ict 0x%08x\n",
 		      inta, trans_pcie->inta_mask, val);
-#ifdef CONFIG_IWLWIFI_DEBUG
 	if (iwl_have_debug_level(IWL_DL_ISR))
 		IWL_DEBUG_ISR(trans, "enabled(hw) 0x%08x\n",
 			      iwl_read32(trans, CSR_INT_MASK));
-#endif
 
 	inta &= trans_pcie->inta_mask;
 	trans_pcie->inta |= inta;
-- 
cgit v1.2.3


From bc888f4078d549792e7b10a886f98271d5ad432b Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 10 Jun 2013 15:58:13 +0200
Subject: iwlwifi: mvm: mark scratch area in TX command

Give the scratch area a sub structure so it's marked
explicitly and it is obvious which part it is.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index 6994232f5726..700cce731770 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -228,10 +228,11 @@ struct iwl_tx_cmd {
 	__le16 len;
 	__le16 next_frame_len;
 	__le32 tx_flags;
-	/* DRAM_SCRATCH_API_U_VER_1 */
-	u8 try_cnt;
-	u8 btkill_cnt;
-	__le16 reserved;
+	struct {
+		u8 try_cnt;
+		u8 btkill_cnt;
+		__le16 reserved;
+	} scratch; /* DRAM_SCRATCH_API_U_VER_1 */
 	__le32 rate_n_flags;
 	u8 sta_id;
 	u8 sec_ctl;
-- 
cgit v1.2.3


From 4f25bbdb160e4317f5d0efac90357d0a899a4be1 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 10 Jun 2013 16:12:52 +0200
Subject: iwlwifi: create opmode/device dependencies

The older devices (pre-7000/3000 series) all only work with the
DVM opmode due to firmware availability, while newer ones will
only work with the MVM opmode for the same reason.

When building a driver that only has one of MVM or DVM, there's
no reason to build the device support and have the PCIe IDs for
all devices since they can't be used anyway, so avoid that.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/Makefile     | 6 ++++--
 drivers/net/wireless/iwlwifi/iwl-config.h | 4 ++++
 drivers/net/wireless/iwlwifi/pcie/drv.c   | 4 ++++
 3 files changed, 12 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 3b5613ea458b..f55a758b87f6 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -7,14 +7,16 @@ iwlwifi-objs		+= iwl-notif-wait.o
 iwlwifi-objs		+= iwl-eeprom-read.o iwl-eeprom-parse.o
 iwlwifi-objs		+= iwl-phy-db.o iwl-nvm-parse.o
 iwlwifi-objs		+= pcie/drv.o pcie/rx.o pcie/tx.o pcie/trans.o
-iwlwifi-objs		+= iwl-1000.o iwl-2000.o iwl-5000.o iwl-6000.o iwl-7000.o
+iwlwifi-$(CONFIG_IWLDVM) += iwl-1000.o iwl-2000.o iwl-5000.o iwl-6000.o
+iwlwifi-$(CONFIG_IWLMVM) += iwl-7000.o
+
+iwlwifi-objs += $(iwlwifi-m)
 
 iwlwifi-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
 iwlwifi-$(CONFIG_IWLWIFI_DEVICE_TESTMODE) += iwl-test.o
 
 ccflags-y += -D__CHECK_ENDIAN__ -I$(src)
 
-
 obj-$(CONFIG_IWLDVM)	+= dvm/
 obj-$(CONFIG_IWLMVM)	+= mvm/
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index a193832fc790..0189b9050f22 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -237,6 +237,7 @@ struct iwl_cfg {
 /*
  * This list declares the config structures for all devices.
  */
+#if IS_ENABLED(CONFIG_IWLDVM)
 extern const struct iwl_cfg iwl5300_agn_cfg;
 extern const struct iwl_cfg iwl5100_agn_cfg;
 extern const struct iwl_cfg iwl5350_agn_cfg;
@@ -278,11 +279,14 @@ extern const struct iwl_cfg iwl6035_2agn_cfg;
 extern const struct iwl_cfg iwl105_bgn_cfg;
 extern const struct iwl_cfg iwl105_bgn_d_cfg;
 extern const struct iwl_cfg iwl135_bgn_cfg;
+#endif /* CONFIG_IWLDVM */
+#if IS_ENABLED(CONFIG_IWLMVM)
 extern const struct iwl_cfg iwl7260_2ac_cfg;
 extern const struct iwl_cfg iwl7260_2n_cfg;
 extern const struct iwl_cfg iwl7260_n_cfg;
 extern const struct iwl_cfg iwl3160_2ac_cfg;
 extern const struct iwl_cfg iwl3160_2n_cfg;
 extern const struct iwl_cfg iwl3160_n_cfg;
+#endif /* CONFIG_IWLMVM */
 
 #endif /* __IWL_CONFIG_H__ */
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index db7bdd35a9c5..81f3ea5b09a4 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -78,6 +78,7 @@
 
 /* Hardware specific file defines the PCI IDs table for that hardware module */
 static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
+#if IS_ENABLED(CONFIG_IWLDVM)
 	{IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
 	{IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
 	{IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
@@ -253,7 +254,9 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 	{IWL_PCI_DEVICE(0x0892, 0x0062, iwl135_bgn_cfg)},
 	{IWL_PCI_DEVICE(0x0893, 0x0262, iwl135_bgn_cfg)},
 	{IWL_PCI_DEVICE(0x0892, 0x0462, iwl135_bgn_cfg)},
+#endif /* CONFIG_IWLDVM */
 
+#if IS_ENABLED(CONFIG_IWLMVM)
 /* 7000 Series */
 	{IWL_PCI_DEVICE(0x08B1, 0x4070, iwl7260_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x08B1, 0x4170, iwl7260_2ac_cfg)},
@@ -304,6 +307,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 	{IWL_PCI_DEVICE(0x08B3, 0x8062, iwl3160_n_cfg)},
 	{IWL_PCI_DEVICE(0x08B4, 0x8270, iwl3160_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x08B3, 0x8470, iwl3160_2ac_cfg)},
+#endif /* CONFIG_IWLMVM */
 
 	{0}
 };
-- 
cgit v1.2.3


From ebea2f32e814445f94f9e087b646f1cf4d55fa5a Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 13 Jun 2013 10:07:47 +0300
Subject: iwlwifi: mvm: take the seqno from packet if transmit failed

The fw is unreliable in all the cases in which the packet
wasn't sent.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/tx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index a830eb6cc411..72fc580f8d71 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -609,8 +609,8 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm,
 		    !(info->flags & IEEE80211_TX_STAT_ACK))
 			info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
 
-		/* W/A FW bug: seq_ctl is wrong when the queue is flushed */
-		if (status == TX_STATUS_FAIL_FIFO_FLUSHED) {
+		/* W/A FW bug: seq_ctl is wrong when the status isn't success */
+		if (status != TX_STATUS_SUCCESS) {
 			struct ieee80211_hdr *hdr = (void *)skb->data;
 			seq_ctl = le16_to_cpu(hdr->seq_ctrl);
 		}
-- 
cgit v1.2.3


From adaf69186c24100d34c2fb107dacd33546cad3c5 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 13 Jun 2013 10:25:43 +0300
Subject: iwlwifi: mvm: remove obsolete comment

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/tx.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index 72fc580f8d71..42df1fdc5cbd 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -407,7 +407,6 @@ int iwl_mvm_tx_skb(struct iwl_mvm *mvm, struct sk_buff *skb,
 	IWL_DEBUG_TX(mvm, "TX to [%d|%d] Q:%d - seq: 0x%x\n", mvmsta->sta_id,
 		     tid, txq_id, seq_number);
 
-	/* NOTE: aggregation will need changes here (for txq id) */
 	if (iwl_trans_tx(mvm->trans, skb, dev_cmd, txq_id))
 		goto drop_unlock_sta;
 
-- 
cgit v1.2.3


From b967613d7e7c7bad176f5627c55e2d8c5aa2480e Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 13 Jun 2013 11:45:59 +0300
Subject: iwlwifi: pcie: fix race in queue unmapping

When a queue is disabled, it frees all its entries. Later,
the op_mode might still get notifications from the firmware
that triggers to free entries in the tx queue. The transport
should be prepared for these races and know to ignore
reclaim calls on queues that have been disabled and whose
entries have been freed.

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/tx.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index c5e30294c5ac..51fca425def7 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -576,9 +576,12 @@ static void iwl_pcie_txq_unmap(struct iwl_trans *trans, int txq_id)
 
 	spin_lock_bh(&txq->lock);
 	while (q->write_ptr != q->read_ptr) {
+		IWL_DEBUG_TX_REPLY(trans, "Q %d Free %d\n",
+				   txq_id, q->read_ptr);
 		iwl_pcie_txq_free_tfd(trans, txq);
 		q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd);
 	}
+	txq->active = false;
 	spin_unlock_bh(&txq->lock);
 }
 
@@ -927,6 +930,12 @@ void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn,
 
 	spin_lock_bh(&txq->lock);
 
+	if (!txq->active) {
+		IWL_DEBUG_TX_QUEUES(trans, "Q %d inactive - ignoring idx %d\n",
+				    txq_id, ssn);
+		goto out;
+	}
+
 	if (txq->q.read_ptr == tfd_num)
 		goto out;
 
@@ -1103,6 +1112,7 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo,
 		       (fifo << SCD_QUEUE_STTS_REG_POS_TXF) |
 		       (1 << SCD_QUEUE_STTS_REG_POS_WSL) |
 		       SCD_QUEUE_STTS_REG_MSK);
+	trans_pcie->txq[txq_id].active = true;
 	IWL_DEBUG_TX_QUEUES(trans, "Activate queue %d on FIFO %d WrPtr: %d\n",
 			    txq_id, fifo, ssn & 0xff);
 }
-- 
cgit v1.2.3


From 8a487b1a7432b20ff3f82387a8ce7555a964b44e Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 13 Jun 2013 13:10:00 +0300
Subject: iwlwifi: pcie: wake the queue if stopped when being unmapped

When the queue is unmapped while it was so loaded that
mac80211's was stopped, we need to wake the queue after
having freed all the packets in the queue.
Not doing so can result in weird stuff like:

* run lots of traffic (mac80211's queue gets stopped)
* RFKILL
* de-assert RFKILL
* no traffic

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/tx.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 51fca425def7..48acfc620191 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -583,6 +583,9 @@ static void iwl_pcie_txq_unmap(struct iwl_trans *trans, int txq_id)
 	}
 	txq->active = false;
 	spin_unlock_bh(&txq->lock);
+
+	/* just in case - this queue may have been stopped */
+	iwl_wake_queue(trans, txq);
 }
 
 /*
-- 
cgit v1.2.3


From 178c059e7640aa8e50213400c6f3dde00189d979 Mon Sep 17 00:00:00 2001
From: "Cho, Yu-Chen" <acho@suse.com>
Date: Tue, 4 Jun 2013 21:40:26 +0800
Subject: Bluetooth: Add support for Mediatek Bluetooth device [0e8d:763f]

This patch adds support for Mediatek Bluetooth device

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0e8d ProdID=763f Rev= 1.00
S:  Manufacturer=MediaTek
S:  Product=BT
S:  SerialNumber=1.0
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=450mA
A:  FirstIf#= 0 IfCount= 2 Cls=ff(vend.) Sub=ff Prot=ff
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/bluetooth/btusb.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers')

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 7a7e5f8ecadc..81f12757a842 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -57,6 +57,9 @@ static struct usb_device_id btusb_table[] = {
 	/* Apple-specific (Broadcom) devices */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) },
 
+	/* MediaTek MT76x0E */
+	{ USB_DEVICE(0x0e8d, 0x763f) },
+
 	/* Broadcom SoftSailing reporting vendor specific */
 	{ USB_DEVICE(0x0a5c, 0x21e1) },
 
-- 
cgit v1.2.3


From 6ea81c415574acb88faca905e1d7316057e90a5b Mon Sep 17 00:00:00 2001
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Date: Wed, 5 Jun 2013 10:16:55 +0800
Subject: Bluetooth: btmrvl: fix error return code in
 btmrvl_sdio_card_to_host()

Fix to return -ENOMEM in the skb alloc error handling case
instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/bluetooth/btmrvl_sdio.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 13693b7a0d5c..75c262694632 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -554,6 +554,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
 	skb = bt_skb_alloc(num_blocks * blksz + BTSDIO_DMA_ALIGN, GFP_ATOMIC);
 	if (skb == NULL) {
 		BT_ERR("No free skb");
+		ret = -ENOMEM;
 		goto exit;
 	}
 
-- 
cgit v1.2.3


From 9ad86ed39db83d0c3111c10850e58691ef57e81e Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Wed, 12 Jun 2013 21:35:39 +0200
Subject: carl9170: add support for the new rate control API

With the new rate control API, the driver can now apply the
tx rate to outgoing frames just before they are uploaded to
the device. This is important because the rate control can
now react to fading or improving links a bit sooner.

Also, the driver no longer needs to sort the outgoing frames
for sample attempts (which affected the size of A-MPDUs and
the throughput of the link). For aggregated data frames, the
driver (and rate control) needs only to calculate and apply
a single set of tx rates to every subframe of the whole
aggregate.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/carl9170/carl9170.h |   3 +
 drivers/net/wireless/ath/carl9170/main.c     |   3 +
 drivers/net/wireless/ath/carl9170/tx.c       | 182 +++++++++++++++------------
 3 files changed, 110 insertions(+), 78 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h
index 9dce106cd6d4..8596aba34f96 100644
--- a/drivers/net/wireless/ath/carl9170/carl9170.h
+++ b/drivers/net/wireless/ath/carl9170/carl9170.h
@@ -133,6 +133,9 @@ struct carl9170_sta_tid {
 
 	/* Preaggregation reorder queue */
 	struct sk_buff_head queue;
+
+	struct ieee80211_sta *sta;
+	struct ieee80211_vif *vif;
 };
 
 #define CARL9170_QUEUE_TIMEOUT		256
diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c
index e9010a481dfd..4a33c6e39ca2 100644
--- a/drivers/net/wireless/ath/carl9170/main.c
+++ b/drivers/net/wireless/ath/carl9170/main.c
@@ -1448,6 +1448,8 @@ static int carl9170_op_ampdu_action(struct ieee80211_hw *hw,
 		tid_info->state = CARL9170_TID_STATE_PROGRESS;
 		tid_info->tid = tid;
 		tid_info->max = sta_info->ampdu_max_len;
+		tid_info->sta = sta;
+		tid_info->vif = vif;
 
 		INIT_LIST_HEAD(&tid_info->list);
 		INIT_LIST_HEAD(&tid_info->tmp_list);
@@ -1857,6 +1859,7 @@ void *carl9170_alloc(size_t priv_size)
 		     IEEE80211_HW_SUPPORTS_PS |
 		     IEEE80211_HW_PS_NULLFUNC_STACK |
 		     IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC |
+		     IEEE80211_HW_SUPPORTS_RC_TABLE |
 		     IEEE80211_HW_SIGNAL_DBM;
 
 	if (!modparam_noht) {
diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c
index c61cafa2665b..e3f696ee4d23 100644
--- a/drivers/net/wireless/ath/carl9170/tx.c
+++ b/drivers/net/wireless/ath/carl9170/tx.c
@@ -625,7 +625,7 @@ static void carl9170_tx_ampdu_timeout(struct ar9170 *ar)
 		    msecs_to_jiffies(CARL9170_QUEUE_TIMEOUT)))
 			goto unlock;
 
-		sta = __carl9170_get_tx_sta(ar, skb);
+		sta = iter->sta;
 		if (WARN_ON(!sta))
 			goto unlock;
 
@@ -866,6 +866,93 @@ static bool carl9170_tx_cts_check(struct ar9170 *ar,
 	return false;
 }
 
+static void carl9170_tx_get_rates(struct ar9170 *ar,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_sta *sta,
+				  struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info;
+
+	BUILD_BUG_ON(IEEE80211_TX_MAX_RATES < CARL9170_TX_MAX_RATES);
+	BUILD_BUG_ON(IEEE80211_TX_MAX_RATES > IEEE80211_TX_RATE_TABLE_SIZE);
+
+	info = IEEE80211_SKB_CB(skb);
+
+	ieee80211_get_tx_rates(vif, sta, skb,
+			       info->control.rates,
+			       IEEE80211_TX_MAX_RATES);
+}
+
+static void carl9170_tx_apply_rateset(struct ar9170 *ar,
+				      struct ieee80211_tx_info *sinfo,
+				      struct sk_buff *skb)
+{
+	struct ieee80211_tx_rate *txrate;
+	struct ieee80211_tx_info *info;
+	struct _carl9170_tx_superframe *txc = (void *) skb->data;
+	int i;
+	bool ampdu;
+	bool no_ack;
+
+	info = IEEE80211_SKB_CB(skb);
+	ampdu = !!(info->flags & IEEE80211_TX_CTL_AMPDU);
+	no_ack = !!(info->flags & IEEE80211_TX_CTL_NO_ACK);
+
+	/* Set the rate control probe flag for all (sub-) frames.
+	 * This is because the TX_STATS_AMPDU flag is only set on
+	 * the last frame, so it has to be inherited.
+	 */
+	info->flags |= (sinfo->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE);
+
+	/* NOTE: For the first rate, the ERP & AMPDU flags are directly
+	 * taken from mac_control. For all fallback rate, the firmware
+	 * updates the mac_control flags from the rate info field.
+	 */
+	for (i = 0; i < CARL9170_TX_MAX_RATES; i++) {
+		__le32 phy_set;
+
+		txrate = &sinfo->control.rates[i];
+		if (txrate->idx < 0)
+			break;
+
+		phy_set = carl9170_tx_physet(ar, info, txrate);
+		if (i == 0) {
+			__le16 mac_tmp = cpu_to_le16(0);
+
+			/* first rate - part of the hw's frame header */
+			txc->f.phy_control = phy_set;
+
+			if (ampdu && txrate->flags & IEEE80211_TX_RC_MCS)
+				mac_tmp |= cpu_to_le16(AR9170_TX_MAC_AGGR);
+
+			if (carl9170_tx_rts_check(ar, txrate, ampdu, no_ack))
+				mac_tmp |= cpu_to_le16(AR9170_TX_MAC_PROT_RTS);
+			else if (carl9170_tx_cts_check(ar, txrate))
+				mac_tmp |= cpu_to_le16(AR9170_TX_MAC_PROT_CTS);
+
+			txc->f.mac_control |= mac_tmp;
+		} else {
+			/* fallback rates are stored in the firmware's
+			 * retry rate set array.
+			 */
+			txc->s.rr[i - 1] = phy_set;
+		}
+
+		SET_VAL(CARL9170_TX_SUPER_RI_TRIES, txc->s.ri[i],
+			txrate->count);
+
+		if (carl9170_tx_rts_check(ar, txrate, ampdu, no_ack))
+			txc->s.ri[i] |= (AR9170_TX_MAC_PROT_RTS <<
+				CARL9170_TX_SUPER_RI_ERP_PROT_S);
+		else if (carl9170_tx_cts_check(ar, txrate))
+			txc->s.ri[i] |= (AR9170_TX_MAC_PROT_CTS <<
+				CARL9170_TX_SUPER_RI_ERP_PROT_S);
+
+		if (ampdu && (txrate->flags & IEEE80211_TX_RC_MCS))
+			txc->s.ri[i] |= CARL9170_TX_SUPER_RI_AMPDU;
+	}
+}
+
 static int carl9170_tx_prepare(struct ar9170 *ar,
 			       struct ieee80211_sta *sta,
 			       struct sk_buff *skb)
@@ -874,13 +961,10 @@ static int carl9170_tx_prepare(struct ar9170 *ar,
 	struct _carl9170_tx_superframe *txc;
 	struct carl9170_vif_info *cvif;
 	struct ieee80211_tx_info *info;
-	struct ieee80211_tx_rate *txrate;
 	struct carl9170_tx_info *arinfo;
 	unsigned int hw_queue;
-	int i;
 	__le16 mac_tmp;
 	u16 len;
-	bool ampdu, no_ack;
 
 	BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data));
 	BUILD_BUG_ON(sizeof(struct _carl9170_tx_superdesc) !=
@@ -889,8 +973,6 @@ static int carl9170_tx_prepare(struct ar9170 *ar,
 	BUILD_BUG_ON(sizeof(struct _ar9170_tx_hwdesc) !=
 		     AR9170_TX_HWDESC_LEN);
 
-	BUILD_BUG_ON(IEEE80211_TX_MAX_RATES < CARL9170_TX_MAX_RATES);
-
 	BUILD_BUG_ON(AR9170_MAX_VIRTUAL_MAC >
 		((CARL9170_TX_SUPER_MISC_VIF_ID >>
 		 CARL9170_TX_SUPER_MISC_VIF_ID_S) + 1));
@@ -932,8 +1014,7 @@ static int carl9170_tx_prepare(struct ar9170 *ar,
 	mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) &
 			       AR9170_TX_MAC_QOS);
 
-	no_ack = !!(info->flags & IEEE80211_TX_CTL_NO_ACK);
-	if (unlikely(no_ack))
+	if (unlikely(info->flags & IEEE80211_TX_CTL_NO_ACK))
 		mac_tmp |= cpu_to_le16(AR9170_TX_MAC_NO_ACK);
 
 	if (info->control.hw_key) {
@@ -954,8 +1035,7 @@ static int carl9170_tx_prepare(struct ar9170 *ar,
 		}
 	}
 
-	ampdu = !!(info->flags & IEEE80211_TX_CTL_AMPDU);
-	if (ampdu) {
+	if (info->flags & IEEE80211_TX_CTL_AMPDU) {
 		unsigned int density, factor;
 
 		if (unlikely(!sta || !cvif))
@@ -982,50 +1062,6 @@ static int carl9170_tx_prepare(struct ar9170 *ar,
 			txc->s.ampdu_settings, factor);
 	}
 
-	/*
-	 * NOTE: For the first rate, the ERP & AMPDU flags are directly
-	 * taken from mac_control. For all fallback rate, the firmware
-	 * updates the mac_control flags from the rate info field.
-	 */
-	for (i = 0; i < CARL9170_TX_MAX_RATES; i++) {
-		__le32 phy_set;
-		txrate = &info->control.rates[i];
-		if (txrate->idx < 0)
-			break;
-
-		phy_set = carl9170_tx_physet(ar, info, txrate);
-		if (i == 0) {
-			/* first rate - part of the hw's frame header */
-			txc->f.phy_control = phy_set;
-
-			if (ampdu && txrate->flags & IEEE80211_TX_RC_MCS)
-				mac_tmp |= cpu_to_le16(AR9170_TX_MAC_AGGR);
-			if (carl9170_tx_rts_check(ar, txrate, ampdu, no_ack))
-				mac_tmp |= cpu_to_le16(AR9170_TX_MAC_PROT_RTS);
-			else if (carl9170_tx_cts_check(ar, txrate))
-				mac_tmp |= cpu_to_le16(AR9170_TX_MAC_PROT_CTS);
-
-		} else {
-			/* fallback rates are stored in the firmware's
-			 * retry rate set array.
-			 */
-			txc->s.rr[i - 1] = phy_set;
-		}
-
-		SET_VAL(CARL9170_TX_SUPER_RI_TRIES, txc->s.ri[i],
-			txrate->count);
-
-		if (carl9170_tx_rts_check(ar, txrate, ampdu, no_ack))
-			txc->s.ri[i] |= (AR9170_TX_MAC_PROT_RTS <<
-				CARL9170_TX_SUPER_RI_ERP_PROT_S);
-		else if (carl9170_tx_cts_check(ar, txrate))
-			txc->s.ri[i] |= (AR9170_TX_MAC_PROT_CTS <<
-				CARL9170_TX_SUPER_RI_ERP_PROT_S);
-
-		if (ampdu && (txrate->flags & IEEE80211_TX_RC_MCS))
-			txc->s.ri[i] |= CARL9170_TX_SUPER_RI_AMPDU;
-	}
-
 	txc->s.len = cpu_to_le16(skb->len);
 	txc->f.length = cpu_to_le16(len + FCS_LEN);
 	txc->f.mac_control = mac_tmp;
@@ -1086,31 +1122,12 @@ static void carl9170_set_ampdu_params(struct ar9170 *ar, struct sk_buff *skb)
 	}
 }
 
-static bool carl9170_tx_rate_check(struct ar9170 *ar, struct sk_buff *_dest,
-				   struct sk_buff *_src)
-{
-	struct _carl9170_tx_superframe *dest, *src;
-
-	dest = (void *) _dest->data;
-	src = (void *) _src->data;
-
-	/*
-	 * The mac80211 rate control algorithm expects that all MPDUs in
-	 * an AMPDU share the same tx vectors.
-	 * This is not really obvious right now, because the hardware
-	 * does the AMPDU setup according to its own rulebook.
-	 * Our nicely assembled, strictly monotonic increasing mpdu
-	 * chains will be broken up, mashed back together...
-	 */
-
-	return (dest->f.phy_control == src->f.phy_control);
-}
-
 static void carl9170_tx_ampdu(struct ar9170 *ar)
 {
 	struct sk_buff_head agg;
 	struct carl9170_sta_tid *tid_info;
 	struct sk_buff *skb, *first;
+	struct ieee80211_tx_info *tx_info_first;
 	unsigned int i = 0, done_ampdus = 0;
 	u16 seq, queue, tmpssn;
 
@@ -1156,6 +1173,7 @@ retry:
 			goto processed;
 		}
 
+		tx_info_first = NULL;
 		while ((skb = skb_peek(&tid_info->queue))) {
 			/* strict 0, 1, ..., n - 1, n frame sequence order */
 			if (unlikely(carl9170_get_seq(skb) != seq))
@@ -1166,8 +1184,13 @@ retry:
 			    (tid_info->max - 1)))
 				break;
 
-			if (!carl9170_tx_rate_check(ar, skb, first))
-				break;
+			if (!tx_info_first) {
+				carl9170_tx_get_rates(ar, tid_info->vif,
+						      tid_info->sta, first);
+				tx_info_first = IEEE80211_SKB_CB(first);
+			}
+
+			carl9170_tx_apply_rateset(ar, tx_info_first, skb);
 
 			atomic_inc(&ar->tx_ampdu_upload);
 			tid_info->snx = seq = SEQ_NEXT(seq);
@@ -1182,8 +1205,7 @@ retry:
 		if (skb_queue_empty(&tid_info->queue) ||
 		    carl9170_get_seq(skb_peek(&tid_info->queue)) !=
 		    tid_info->snx) {
-			/*
-			 * stop TID, if A-MPDU frames are still missing,
+			/* stop TID, if A-MPDU frames are still missing,
 			 * or whenever the queue is empty.
 			 */
 
@@ -1450,12 +1472,14 @@ void carl9170_op_tx(struct ieee80211_hw *hw,
 	struct ar9170 *ar = hw->priv;
 	struct ieee80211_tx_info *info;
 	struct ieee80211_sta *sta = control->sta;
+	struct ieee80211_vif *vif;
 	bool run;
 
 	if (unlikely(!IS_STARTED(ar)))
 		goto err_free;
 
 	info = IEEE80211_SKB_CB(skb);
+	vif = info->control.vif;
 
 	if (unlikely(carl9170_tx_prepare(ar, sta, skb)))
 		goto err_free;
@@ -1486,6 +1510,8 @@ void carl9170_op_tx(struct ieee80211_hw *hw,
 	} else {
 		unsigned int queue = skb_get_queue_mapping(skb);
 
+		carl9170_tx_get_rates(ar, vif, sta, skb);
+		carl9170_tx_apply_rateset(ar, info, skb);
 		skb_queue_tail(&ar->tx_pending[queue], skb);
 	}
 
-- 
cgit v1.2.3


From fca97d763dc662db446c9a6e5486ef0c77d8ad5b Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Thu, 13 Jun 2013 08:52:09 +0530
Subject: ath9k: Fix ANI trigger threshold

Since raising/lowering the limits based on INI has
been changed, the error limit for OFDM has to be 1000,
not 3500.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index b75aea23b313..77a06fd40287 100644
--- a/drivers/net/wireless/ath/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
@@ -20,7 +20,7 @@
 #define BEACON_RSSI(ahp) (ahp->stats.avgbrssi)
 
 /* units are errors per second */
-#define ATH9K_ANI_OFDM_TRIG_HIGH          3500
+#define ATH9K_ANI_OFDM_TRIG_HIGH          1000
 #define ATH9K_ANI_OFDM_TRIG_LOW           400
 #define ATH9K_ANI_CCK_TRIG_HIGH           600
 #define ATH9K_ANI_CCK_TRIG_LOW            300
-- 
cgit v1.2.3


From 9c59844005c22700b36dcdbafeea7956b7f4b174 Mon Sep 17 00:00:00 2001
From: Arron Wang <arron.wang@intel.com>
Date: Mon, 22 Apr 2013 17:21:04 +0800
Subject: NFC: pn544: Identify Type F NFC-DEP through NFCID2

NFCID2 is defined as the first 2 manufacturer ID (IDm) bytes.
NFC DEP (NFC peer to peer) devices Type-F NFCID2 must start with
0x01fe according to the NFC Digital Specification.
By checking those first 2 bytes we send the right command either to the
reader gate when NFCID2 != 0x1fe (The NFC tag case) or to the NFCIP1 gate
when seeing an NFC DEP device (The NFC peer to peer case).

Without this fix, Felica (Type F) tags are not properly detected with this
driver.

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/nfc/pn544/pn544.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c
index 9c5f16e7baef..0963de2f6ab0 100644
--- a/drivers/nfc/pn544/pn544.c
+++ b/drivers/nfc/pn544/pn544.c
@@ -551,20 +551,25 @@ static int pn544_hci_complete_target_discovered(struct nfc_hci_dev *hdev,
 			return -EPROTO;
 		}
 
-		r = nfc_hci_send_cmd(hdev, PN544_RF_READER_F_GATE,
-				     PN544_RF_READER_CMD_ACTIVATE_NEXT,
-				     uid_skb->data, uid_skb->len, NULL);
-		kfree_skb(uid_skb);
-
-		r = nfc_hci_send_cmd(hdev,
+		/* Type F NFC-DEP IDm has prefix 0x01FE */
+		if ((uid_skb->data[0] == 0x01) && (uid_skb->data[1] == 0xfe)) {
+			kfree_skb(uid_skb);
+			r = nfc_hci_send_cmd(hdev,
 					PN544_RF_READER_NFCIP1_INITIATOR_GATE,
 					PN544_HCI_CMD_CONTINUE_ACTIVATION,
 					NULL, 0, NULL);
-		if (r < 0)
-			return r;
+			if (r < 0)
+				return r;
 
-		target->hci_reader_gate = PN544_RF_READER_NFCIP1_INITIATOR_GATE;
-		target->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+			target->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+			target->hci_reader_gate =
+				PN544_RF_READER_NFCIP1_INITIATOR_GATE;
+		} else {
+			r = nfc_hci_send_cmd(hdev, PN544_RF_READER_F_GATE,
+					     PN544_RF_READER_CMD_ACTIVATE_NEXT,
+					     uid_skb->data, uid_skb->len, NULL);
+			kfree_skb(uid_skb);
+		}
 	} else if (target->supported_protocols & NFC_PROTO_ISO14443_MASK) {
 		/*
 		 * TODO: maybe other ISO 14443 require some kind of continue
-- 
cgit v1.2.3


From a69bdc1ecd032fda1bc808fa0e1634bbc9417ad5 Mon Sep 17 00:00:00 2001
From: Arron Wang <arron.wang@intel.com>
Date: Mon, 22 Apr 2013 17:21:27 +0800
Subject: NFC: pn544: Remove Felica and Jewel device presence check

There is no builtin command for driver to check the presence of
Felica and Jewel device, it is more reasonable for the userspace
daemon neard to build seperate commands to check the presence of
the card.

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/nfc/pn544/pn544.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c
index 0963de2f6ab0..84b5168b603c 100644
--- a/drivers/nfc/pn544/pn544.c
+++ b/drivers/nfc/pn544/pn544.c
@@ -711,12 +711,9 @@ static int pn544_hci_check_presence(struct nfc_hci_dev *hdev,
 		 return nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
 				     PN544_RF_READER_CMD_ACTIVATE_NEXT,
 				     target->nfcid1, target->nfcid1_len, NULL);
-	} else if (target->supported_protocols & NFC_PROTO_JEWEL_MASK) {
-		return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
-					PN544_JEWEL_RAW_CMD, NULL, 0, NULL);
-	} else if (target->supported_protocols & NFC_PROTO_FELICA_MASK) {
-		return nfc_hci_send_cmd(hdev, PN544_RF_READER_F_GATE,
-					PN544_FELICA_RAW, NULL, 0, NULL);
+	} else if (target->supported_protocols & (NFC_PROTO_JEWEL_MASK |
+						NFC_PROTO_FELICA_MASK)) {
+		return -EOPNOTSUPP;
 	} else if (target->supported_protocols & NFC_PROTO_NFC_DEP_MASK) {
 		return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
 					PN544_HCI_CMD_ATTREQUEST,
-- 
cgit v1.2.3


From 4674d0fecbeeb9731274f03ff35a108630be4585 Mon Sep 17 00:00:00 2001
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Date: Tue, 7 May 2013 20:07:52 +0800
Subject: NFC: pn533: Fix error return code in pn533_probe()

Fix to return -ENOMEM in the nfc device alloc error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/nfc/pn533.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c
index 8f6f2baa930d..0bdfa8852e78 100644
--- a/drivers/nfc/pn533.c
+++ b/drivers/nfc/pn533.c
@@ -2783,8 +2783,10 @@ static int pn533_probe(struct usb_interface *interface,
 					   dev->ops->tx_header_len +
 					   PN533_CMD_DATAEXCH_HEAD_LEN,
 					   dev->ops->tx_tail_len);
-	if (!dev->nfc_dev)
+	if (!dev->nfc_dev) {
+		rc = -ENOMEM;
 		goto destroy_wq;
+	}
 
 	nfc_set_parent_dev(dev->nfc_dev, &interface->dev);
 	nfc_set_drvdata(dev->nfc_dev, dev);
-- 
cgit v1.2.3


From 1095e69f47926db6f1350a9d6a38626521580e87 Mon Sep 17 00:00:00 2001
From: Frederic Danis <frederic.danis@linux.intel.com>
Date: Wed, 22 May 2013 11:36:17 +0200
Subject: NFC: NCI: Fix skb->dev usage

skb->dev is used for carrying a net_device pointer and not
an nci_dev pointer.

Remove usage of skb-dev to carry nci_dev and replace it by parameter
in nci_recv_frame(), nci_send_frame() and driver send() functions.

NfcWilink driver is also updated to use those functions.

Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/nfc/nfcwilink.c    | 17 +++++------------
 include/net/nfc/nci_core.h |  4 ++--
 net/nfc/nci/core.c         | 17 ++++++-----------
 net/nfc/nci/data.c         |  2 --
 4 files changed, 13 insertions(+), 27 deletions(-)

(limited to 'drivers')

diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c
index 3b731acbc408..41cf8f70a6ad 100644
--- a/drivers/nfc/nfcwilink.c
+++ b/drivers/nfc/nfcwilink.c
@@ -109,7 +109,7 @@ enum {
 	NFCWILINK_FW_DOWNLOAD,
 };
 
-static int nfcwilink_send(struct sk_buff *skb);
+static int nfcwilink_send(struct nci_dev *ndev, struct sk_buff *skb);
 
 static inline struct sk_buff *nfcwilink_skb_alloc(unsigned int len, gfp_t how)
 {
@@ -156,8 +156,6 @@ static int nfcwilink_get_bts_file_name(struct nfcwilink *drv, char *file_name)
 		return -ENOMEM;
 	}
 
-	skb->dev = (void *)drv->ndev;
-
 	cmd = (struct nci_vs_nfcc_info_cmd *)
 			skb_put(skb, sizeof(struct nci_vs_nfcc_info_cmd));
 	cmd->gid = NCI_VS_NFCC_INFO_CMD_GID;
@@ -166,7 +164,7 @@ static int nfcwilink_get_bts_file_name(struct nfcwilink *drv, char *file_name)
 
 	drv->nfcc_info.plen = 0;
 
-	rc = nfcwilink_send(skb);
+	rc = nfcwilink_send(drv->ndev, skb);
 	if (rc)
 		return rc;
 
@@ -232,11 +230,9 @@ static int nfcwilink_send_bts_cmd(struct nfcwilink *drv, __u8 *data, int len)
 		return -ENOMEM;
 	}
 
-	skb->dev = (void *)drv->ndev;
-
 	memcpy(skb_put(skb, len), data, len);
 
-	rc = nfcwilink_send(skb);
+	rc = nfcwilink_send(drv->ndev, skb);
 	if (rc)
 		return rc;
 
@@ -371,10 +367,8 @@ static long nfcwilink_receive(void *priv_data, struct sk_buff *skb)
 		return 0;
 	}
 
-	skb->dev = (void *) drv->ndev;
-
 	/* Forward skb to NCI core layer */
-	rc = nci_recv_frame(skb);
+	rc = nci_recv_frame(drv->ndev, skb);
 	if (rc < 0) {
 		nfc_dev_err(&drv->pdev->dev, "nci_recv_frame failed %d", rc);
 		return rc;
@@ -480,9 +474,8 @@ static int nfcwilink_close(struct nci_dev *ndev)
 	return rc;
 }
 
-static int nfcwilink_send(struct sk_buff *skb)
+static int nfcwilink_send(struct nci_dev *ndev, struct sk_buff *skb)
 {
-	struct nci_dev *ndev = (struct nci_dev *)skb->dev;
 	struct nfcwilink *drv = nci_get_drvdata(ndev);
 	struct nfcwilink_hdr hdr = {NFCWILINK_CHNL, NFCWILINK_OPCODE, 0x0000};
 	long len;
diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h
index 5bc0c460edc0..1009d3dcb316 100644
--- a/include/net/nfc/nci_core.h
+++ b/include/net/nfc/nci_core.h
@@ -66,7 +66,7 @@ struct nci_dev;
 struct nci_ops {
 	int (*open)(struct nci_dev *ndev);
 	int (*close)(struct nci_dev *ndev);
-	int (*send)(struct sk_buff *skb);
+	int (*send)(struct nci_dev *ndev, struct sk_buff *skb);
 };
 
 #define NCI_MAX_SUPPORTED_RF_INTERFACES		4
@@ -153,7 +153,7 @@ struct nci_dev *nci_allocate_device(struct nci_ops *ops,
 void nci_free_device(struct nci_dev *ndev);
 int nci_register_device(struct nci_dev *ndev);
 void nci_unregister_device(struct nci_dev *ndev);
-int nci_recv_frame(struct sk_buff *skb);
+int nci_recv_frame(struct nci_dev *ndev, struct sk_buff *skb);
 
 static inline struct sk_buff *nci_skb_alloc(struct nci_dev *ndev,
 					    unsigned int len,
diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c
index 48ada0ec749e..8e0dbbeee9e3 100644
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -797,12 +797,11 @@ EXPORT_SYMBOL(nci_unregister_device);
 /**
  * nci_recv_frame - receive frame from NCI drivers
  *
+ * @ndev: The nci device
  * @skb: The sk_buff to receive
  */
-int nci_recv_frame(struct sk_buff *skb)
+int nci_recv_frame(struct nci_dev *ndev, struct sk_buff *skb)
 {
-	struct nci_dev *ndev = (struct nci_dev *) skb->dev;
-
 	pr_debug("len %d\n", skb->len);
 
 	if (!ndev || (!test_bit(NCI_UP, &ndev->flags) &&
@@ -819,10 +818,8 @@ int nci_recv_frame(struct sk_buff *skb)
 }
 EXPORT_SYMBOL(nci_recv_frame);
 
-static int nci_send_frame(struct sk_buff *skb)
+static int nci_send_frame(struct nci_dev *ndev, struct sk_buff *skb)
 {
-	struct nci_dev *ndev = (struct nci_dev *) skb->dev;
-
 	pr_debug("len %d\n", skb->len);
 
 	if (!ndev) {
@@ -833,7 +830,7 @@ static int nci_send_frame(struct sk_buff *skb)
 	/* Get rid of skb owner, prior to sending to the driver. */
 	skb_orphan(skb);
 
-	return ndev->ops->send(skb);
+	return ndev->ops->send(ndev, skb);
 }
 
 /* Send NCI command */
@@ -861,8 +858,6 @@ int nci_send_cmd(struct nci_dev *ndev, __u16 opcode, __u8 plen, void *payload)
 	if (plen)
 		memcpy(skb_put(skb, plen), payload, plen);
 
-	skb->dev = (void *) ndev;
-
 	skb_queue_tail(&ndev->cmd_q, skb);
 	queue_work(ndev->cmd_wq, &ndev->cmd_work);
 
@@ -894,7 +889,7 @@ static void nci_tx_work(struct work_struct *work)
 			 nci_conn_id(skb->data),
 			 nci_plen(skb->data));
 
-		nci_send_frame(skb);
+		nci_send_frame(ndev, skb);
 
 		mod_timer(&ndev->data_timer,
 			  jiffies + msecs_to_jiffies(NCI_DATA_TIMEOUT));
@@ -963,7 +958,7 @@ static void nci_cmd_work(struct work_struct *work)
 			 nci_opcode_oid(nci_opcode(skb->data)),
 			 nci_plen(skb->data));
 
-		nci_send_frame(skb);
+		nci_send_frame(ndev, skb);
 
 		mod_timer(&ndev->cmd_timer,
 			  jiffies + msecs_to_jiffies(NCI_CMD_TIMEOUT));
diff --git a/net/nfc/nci/data.c b/net/nfc/nci/data.c
index 76c48c5324f8..2a9399dd6c68 100644
--- a/net/nfc/nci/data.c
+++ b/net/nfc/nci/data.c
@@ -80,8 +80,6 @@ static inline void nci_push_data_hdr(struct nci_dev *ndev,
 
 	nci_mt_set((__u8 *)hdr, NCI_MT_DATA_PKT);
 	nci_pbf_set((__u8 *)hdr, pbf);
-
-	skb->dev = (void *) ndev;
 }
 
 static int nci_queue_tx_data_frags(struct nci_dev *ndev,
-- 
cgit v1.2.3


From 31c44464acb8152db5745da700be58ac95ba0a83 Mon Sep 17 00:00:00 2001
From: Samuel Ortiz <sameo@linux.intel.com>
Date: Mon, 27 May 2013 14:59:40 +0200
Subject: NFC: pn533: Use 0x3 for SENSF_REQ Time Slot Number (TSN)

LLCP validation requires TSN to be 0x03 for type F.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/nfc/pn533.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c
index 0bdfa8852e78..6bd4f598b3e1 100644
--- a/drivers/nfc/pn533.c
+++ b/drivers/nfc/pn533.c
@@ -258,7 +258,7 @@ static const struct pn533_poll_modulations poll_mod[] = {
 				.opcode = PN533_FELICA_OPC_SENSF_REQ,
 				.sc = PN533_FELICA_SENSF_SC_ALL,
 				.rc = PN533_FELICA_SENSF_RC_NO_SYSTEM_CODE,
-				.tsn = 0,
+				.tsn = 0x03,
 			},
 		},
 		.len = 7,
@@ -271,7 +271,7 @@ static const struct pn533_poll_modulations poll_mod[] = {
 				.opcode = PN533_FELICA_OPC_SENSF_REQ,
 				.sc = PN533_FELICA_SENSF_SC_ALL,
 				.rc = PN533_FELICA_SENSF_RC_NO_SYSTEM_CODE,
-				.tsn = 0,
+				.tsn = 0x03,
 			},
 		 },
 		.len = 7,
-- 
cgit v1.2.3


From 322bce957e9b0e30ef7147dae0414ad8f3f558c8 Mon Sep 17 00:00:00 2001
From: Samuel Ortiz <sameo@linux.intel.com>
Date: Mon, 27 May 2013 15:29:11 +0200
Subject: NFC: pn533: Copy NFCID2 through ATR_REQ

When using NFC-F we should copy the NFCID2 buffer that we got from
SENSF_RES through the ATR_REQ NFCID3 buffer. Not doing so violates
NFC Forum digital requirement #189.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/nfc/pn533.c      | 14 +++++++++++++-
 include/net/nfc/nfc.h    |  2 ++
 include/uapi/linux/nfc.h |  2 ++
 3 files changed, 17 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c
index 6bd4f598b3e1..e196bdfcfc30 100644
--- a/drivers/nfc/pn533.c
+++ b/drivers/nfc/pn533.c
@@ -1235,7 +1235,7 @@ static int pn533_target_found_type_a(struct nfc_target *nfc_tgt, u8 *tgt_data,
 struct pn533_target_felica {
 	u8 pol_res;
 	u8 opcode;
-	u8 nfcid2[8];
+	u8 nfcid2[NFC_NFCID2_MAXSIZE];
 	u8 pad[8];
 	/* optional */
 	u8 syst_code[];
@@ -1275,6 +1275,9 @@ static int pn533_target_found_felica(struct nfc_target *nfc_tgt, u8 *tgt_data,
 	memcpy(nfc_tgt->sensf_res, &tgt_felica->opcode, 9);
 	nfc_tgt->sensf_res_len = 9;
 
+	memcpy(nfc_tgt->nfcid2, tgt_felica->nfcid2, NFC_NFCID2_MAXSIZE);
+	nfc_tgt->nfcid2_len = NFC_NFCID2_MAXSIZE;
+
 	return 0;
 }
 
@@ -2084,6 +2087,9 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target,
 	if (comm_mode == NFC_COMM_PASSIVE)
 		skb_len += PASSIVE_DATA_LEN;
 
+	if (target && target->nfcid2_len)
+		skb_len += NFC_NFCID3_MAXSIZE;
+
 	skb = pn533_alloc_skb(dev, skb_len);
 	if (!skb)
 		return -ENOMEM;
@@ -2100,6 +2106,12 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target,
 		*next |= 1;
 	}
 
+	if (target && target->nfcid2_len) {
+		memcpy(skb_put(skb, NFC_NFCID3_MAXSIZE), target->nfcid2,
+		       target->nfcid2_len);
+		*next |= 2;
+	}
+
 	if (gb != NULL && gb_len > 0) {
 		memcpy(skb_put(skb, gb_len), gb, gb_len);
 		*next |= 4; /* We have some Gi */
diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h
index 3563dbdcaaf2..8fc1784a264d 100644
--- a/include/net/nfc/nfc.h
+++ b/include/net/nfc/nfc.h
@@ -84,6 +84,8 @@ struct nfc_target {
 	u8 sel_res;
 	u8 nfcid1_len;
 	u8 nfcid1[NFC_NFCID1_MAXSIZE];
+	u8 nfcid2_len;
+	u8 nfcid2[NFC_NFCID2_MAXSIZE];
 	u8 sensb_res_len;
 	u8 sensb_res[NFC_SENSB_RES_MAXSIZE];
 	u8 sensf_res_len;
diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h
index b6cbd164f146..fb304fb774cc 100644
--- a/include/uapi/linux/nfc.h
+++ b/include/uapi/linux/nfc.h
@@ -164,6 +164,8 @@ enum nfc_sdp_attr {
 
 #define NFC_DEVICE_NAME_MAXSIZE 8
 #define NFC_NFCID1_MAXSIZE 10
+#define NFC_NFCID2_MAXSIZE 8
+#define NFC_NFCID3_MAXSIZE 10
 #define NFC_SENSB_RES_MAXSIZE 12
 #define NFC_SENSF_RES_MAXSIZE 18
 #define NFC_GB_MAXSIZE        48
-- 
cgit v1.2.3


From 0b456c418a5595b9d67f300c9ac6a2441e774603 Mon Sep 17 00:00:00 2001
From: Samuel Ortiz <sameo@linux.intel.com>
Date: Tue, 7 May 2013 19:22:11 +0200
Subject: NFC: Remove the static supported_se field

Supported secure elements are typically found during a discovery process
initiated when the NFC controller is up and running. For a given NFC
chipset there can be many configurations (embedded SE or not, with or
without a SIM card wired to the NFC controller SWP interface, etc...) and
thus driver code will never know before hand which SEs are available.
So we remove this field, it will be replaced by a real SE discovery
mechanism.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/nfc/microread/microread.c | 6 ++----
 drivers/nfc/nfcwilink.c           | 1 -
 drivers/nfc/pn533.c               | 1 -
 drivers/nfc/pn544/pn544.c         | 6 ++----
 include/net/nfc/hci.h             | 1 -
 include/net/nfc/nci_core.h        | 1 -
 include/net/nfc/nfc.h             | 2 --
 net/nfc/core.c                    | 2 --
 net/nfc/hci/core.c                | 3 +--
 net/nfc/nci/core.c                | 2 --
 net/nfc/nci/spi.c                 | 3 +--
 net/nfc/netlink.c                 | 1 -
 12 files changed, 6 insertions(+), 23 deletions(-)

(limited to 'drivers')

diff --git a/drivers/nfc/microread/microread.c b/drivers/nfc/microread/microread.c
index 3420d833db17..cdb9f6de132a 100644
--- a/drivers/nfc/microread/microread.c
+++ b/drivers/nfc/microread/microread.c
@@ -650,7 +650,7 @@ int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name,
 {
 	struct microread_info *info;
 	unsigned long quirks = 0;
-	u32 protocols, se;
+	u32 protocols;
 	struct nfc_hci_init_data init_data;
 	int r;
 
@@ -678,10 +678,8 @@ int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name,
 		    NFC_PROTO_ISO14443_B_MASK |
 		    NFC_PROTO_NFC_DEP_MASK;
 
-	se = NFC_SE_UICC | NFC_SE_EMBEDDED;
-
 	info->hdev = nfc_hci_allocate_device(&microread_hci_ops, &init_data,
-					     quirks, protocols, se, llc_name,
+					     quirks, protocols, llc_name,
 					     phy_headroom +
 					     MICROREAD_CMDS_HEADROOM,
 					     phy_tailroom +
diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c
index 41cf8f70a6ad..59f95d8fc98c 100644
--- a/drivers/nfc/nfcwilink.c
+++ b/drivers/nfc/nfcwilink.c
@@ -535,7 +535,6 @@ static int nfcwilink_probe(struct platform_device *pdev)
 
 	drv->ndev = nci_allocate_device(&nfcwilink_ops,
 					protocols,
-					NFC_SE_NONE,
 					NFCWILINK_HDR_LEN,
 					0);
 	if (!drv->ndev) {
diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c
index e196bdfcfc30..a1b46aa7b4d5 100644
--- a/drivers/nfc/pn533.c
+++ b/drivers/nfc/pn533.c
@@ -2791,7 +2791,6 @@ static int pn533_probe(struct usb_interface *interface,
 
 
 	dev->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols,
-					   NFC_SE_NONE,
 					   dev->ops->tx_header_len +
 					   PN533_CMD_DATAEXCH_HEAD_LEN,
 					   dev->ops->tx_tail_len);
diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c
index 84b5168b603c..0d17da7675b7 100644
--- a/drivers/nfc/pn544/pn544.c
+++ b/drivers/nfc/pn544/pn544.c
@@ -803,7 +803,7 @@ int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name,
 		    struct nfc_hci_dev **hdev)
 {
 	struct pn544_hci_info *info;
-	u32 protocols, se;
+	u32 protocols;
 	struct nfc_hci_init_data init_data;
 	int r;
 
@@ -836,10 +836,8 @@ int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name,
 		    NFC_PROTO_ISO14443_B_MASK |
 		    NFC_PROTO_NFC_DEP_MASK;
 
-	se = NFC_SE_UICC | NFC_SE_EMBEDDED;
-
 	info->hdev = nfc_hci_allocate_device(&pn544_hci_ops, &init_data, 0,
-					     protocols, se, llc_name,
+					     protocols, llc_name,
 					     phy_headroom + PN544_CMDS_HEADROOM,
 					     phy_tailroom, phy_payload);
 	if (!info->hdev) {
diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h
index 14faf2dc7a48..eca8846a63d6 100644
--- a/include/net/nfc/hci.h
+++ b/include/net/nfc/hci.h
@@ -153,7 +153,6 @@ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops,
 					    struct nfc_hci_init_data *init_data,
 					    unsigned long quirks,
 					    u32 protocols,
-					    u32 supported_se,
 					    const char *llc_name,
 					    int tx_headroom,
 					    int tx_tailroom,
diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h
index fc1296db237b..99fc1f3a392a 100644
--- a/include/net/nfc/nci_core.h
+++ b/include/net/nfc/nci_core.h
@@ -148,7 +148,6 @@ struct nci_dev {
 /* ----- NCI Devices ----- */
 struct nci_dev *nci_allocate_device(struct nci_ops *ops,
 				    __u32 supported_protocols,
-				    __u32 supported_se,
 				    int tx_headroom,
 				    int tx_tailroom);
 void nci_free_device(struct nci_dev *ndev);
diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h
index 8fc1784a264d..9900c0f5d6bd 100644
--- a/include/net/nfc/nfc.h
+++ b/include/net/nfc/nfc.h
@@ -115,7 +115,6 @@ struct nfc_dev {
 	struct nfc_genl_data genl_data;
 	u32 supported_protocols;
 
-	u32 supported_se;
 	u32 active_se;
 
 	int tx_headroom;
@@ -136,7 +135,6 @@ extern struct class nfc_class;
 
 struct nfc_dev *nfc_allocate_device(struct nfc_ops *ops,
 				    u32 supported_protocols,
-				    u32 supported_se,
 				    int tx_headroom,
 				    int tx_tailroom);
 
diff --git a/net/nfc/core.c b/net/nfc/core.c
index eb3cecf1764e..334954a1d6e8 100644
--- a/net/nfc/core.c
+++ b/net/nfc/core.c
@@ -832,7 +832,6 @@ struct nfc_dev *nfc_get_device(unsigned int idx)
  */
 struct nfc_dev *nfc_allocate_device(struct nfc_ops *ops,
 				    u32 supported_protocols,
-				    u32 supported_se,
 				    int tx_headroom, int tx_tailroom)
 {
 	struct nfc_dev *dev;
@@ -850,7 +849,6 @@ struct nfc_dev *nfc_allocate_device(struct nfc_ops *ops,
 
 	dev->ops = ops;
 	dev->supported_protocols = supported_protocols;
-	dev->supported_se = supported_se;
 	dev->active_se = NFC_SE_NONE;
 	dev->tx_headroom = tx_headroom;
 	dev->tx_tailroom = tx_tailroom;
diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c
index d2ef1e2ee0c6..9c8a63d341d3 100644
--- a/net/nfc/hci/core.c
+++ b/net/nfc/hci/core.c
@@ -808,7 +808,6 @@ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops,
 					    struct nfc_hci_init_data *init_data,
 					    unsigned long quirks,
 					    u32 protocols,
-					    u32 supported_se,
 					    const char *llc_name,
 					    int tx_headroom,
 					    int tx_tailroom,
@@ -834,7 +833,7 @@ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops,
 		return NULL;
 	}
 
-	hdev->ndev = nfc_allocate_device(&hci_nfc_ops, protocols, supported_se,
+	hdev->ndev = nfc_allocate_device(&hci_nfc_ops, protocols,
 					 tx_headroom + HCI_CMDS_HEADROOM,
 					 tx_tailroom);
 	if (!hdev->ndev) {
diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c
index 8e0dbbeee9e3..145bad15e113 100644
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -658,7 +658,6 @@ static struct nfc_ops nci_nfc_ops = {
  */
 struct nci_dev *nci_allocate_device(struct nci_ops *ops,
 				    __u32 supported_protocols,
-				    __u32 supported_se,
 				    int tx_headroom, int tx_tailroom)
 {
 	struct nci_dev *ndev;
@@ -681,7 +680,6 @@ struct nci_dev *nci_allocate_device(struct nci_ops *ops,
 
 	ndev->nfc_dev = nfc_allocate_device(&nci_nfc_ops,
 					    supported_protocols,
-					    supported_se,
 					    tx_headroom + NCI_DATA_HDR_SIZE,
 					    tx_tailroom);
 	if (!ndev->nfc_dev)
diff --git a/net/nfc/nci/spi.c b/net/nfc/nci/spi.c
index 70afc387a965..c7cf37ba7298 100644
--- a/net/nfc/nci/spi.c
+++ b/net/nfc/nci/spi.c
@@ -162,8 +162,7 @@ struct nci_spi_dev *nci_spi_allocate_device(struct spi_device *spi,
 		tailroom += NCI_SPI_CRC_LEN;
 
 	ndev->nci_dev = nci_allocate_device(&nci_spi_ops, supported_protocols,
-					    supported_se, NCI_SPI_HDR_LEN,
-					    tailroom);
+					    NCI_SPI_HDR_LEN, tailroom);
 	if (!ndev->nci_dev)
 		return NULL;
 
diff --git a/net/nfc/netlink.c b/net/nfc/netlink.c
index 1deadad9a285..fdbc662c564a 100644
--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -444,7 +444,6 @@ static int nfc_genl_send_device(struct sk_buff *msg, struct nfc_dev *dev,
 	if (nla_put_string(msg, NFC_ATTR_DEVICE_NAME, nfc_device_name(dev)) ||
 	    nla_put_u32(msg, NFC_ATTR_DEVICE_INDEX, dev->idx) ||
 	    nla_put_u32(msg, NFC_ATTR_PROTOCOLS, dev->supported_protocols) ||
-	    nla_put_u32(msg, NFC_ATTR_SE, dev->supported_se) ||
 	    nla_put_u8(msg, NFC_ATTR_DEVICE_POWERED, dev->dev_up) ||
 	    nla_put_u8(msg, NFC_ATTR_RF_MODE, dev->rf_mode))
 		goto nla_put_failure;
-- 
cgit v1.2.3


From 86eca4e71f41fb90800707cd05f580cd3e0cb836 Mon Sep 17 00:00:00 2001
From: Olivier Guiter <olivier.guiter@linux.intel.com>
Date: Mon, 3 Jun 2013 12:02:29 +0200
Subject: NFC: pn533: Fix ACR122 related debug output

Instead of dumping ACR122 frames as errors, we use the print_hex_dump()
dynamic debug APIs.
We also print an accurate IC version, as the ACR122 is pn532 based.

Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/nfc/pn533.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c
index a1b46aa7b4d5..bfb4a4e7c604 100644
--- a/drivers/nfc/pn533.c
+++ b/drivers/nfc/pn533.c
@@ -2501,7 +2501,7 @@ static void pn533_acr122_poweron_rdr_resp(struct urb *urb)
 
 	nfc_dev_dbg(&urb->dev->dev, "%s", __func__);
 
-	print_hex_dump(KERN_ERR, "ACR122 RX: ", DUMP_PREFIX_NONE, 16, 1,
+	print_hex_dump_debug("ACR122 RX: ", DUMP_PREFIX_NONE, 16, 1,
 		       urb->transfer_buffer, urb->transfer_buffer_length,
 		       false);
 
@@ -2532,7 +2532,7 @@ static int pn533_acr122_poweron_rdr(struct pn533 *dev)
 	dev->out_urb->transfer_buffer = cmd;
 	dev->out_urb->transfer_buffer_length = sizeof(cmd);
 
-	print_hex_dump(KERN_ERR, "ACR122 TX: ", DUMP_PREFIX_NONE, 16, 1,
+	print_hex_dump_debug("ACR122 TX: ", DUMP_PREFIX_NONE, 16, 1,
 		       cmd, sizeof(cmd), false);
 
 	rc = usb_submit_urb(dev->out_urb, GFP_KERNEL);
@@ -2786,8 +2786,8 @@ static int pn533_probe(struct usb_interface *interface,
 		goto destroy_wq;
 
 	nfc_dev_info(&dev->interface->dev,
-		     "NXP PN533 firmware ver %d.%d now attached",
-		     fw_ver.ver, fw_ver.rev);
+		     "NXP PN5%02X firmware ver %d.%d now attached",
+		     fw_ver.ic, fw_ver.ver, fw_ver.rev);
 
 
 	dev->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols,
-- 
cgit v1.2.3


From 7cbe0ff3e475b7268ad9b55057048b2299fd60e0 Mon Sep 17 00:00:00 2001
From: Thierry Escande <thierry.escande@linux.intel.com>
Date: Thu, 6 Jun 2013 16:23:23 +0200
Subject: NFC: Add a nfc hardware simulation driver

This driver declares two virtual NFC devices supporting NFC-DEP protocol.
An LLCP connection can be established between them and all packets sent
from one device is sent back to the other, acting as loopback devices.

Once established, the LLCP link can be disconnected by disabling the target
device (with rfkill, nfctool, or neard disable-adapter test script).

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/nfc/Kconfig  |  10 +
 drivers/nfc/Makefile |   1 +
 drivers/nfc/nfcsim.c | 541 +++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 552 insertions(+)
 create mode 100644 drivers/nfc/nfcsim.c

(limited to 'drivers')

diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig
index 74a852e4e41f..b0b64ccb7d7d 100644
--- a/drivers/nfc/Kconfig
+++ b/drivers/nfc/Kconfig
@@ -36,6 +36,16 @@ config NFC_MEI_PHY
 
 	  If unsure, say N.
 
+config NFC_SIM
+	tristate "NFC hardware simulator driver"
+	help
+	  This driver declares two virtual NFC devices supporting NFC-DEP
+	  protocol. An LLCP connection can be established between them and
+	  all packets sent from one device is sent back to the other, acting as
+	  loopback devices.
+
+	  If unsure, say N.
+
 source "drivers/nfc/pn544/Kconfig"
 source "drivers/nfc/microread/Kconfig"
 
diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile
index aa6bd657ef40..be7636abcb3f 100644
--- a/drivers/nfc/Makefile
+++ b/drivers/nfc/Makefile
@@ -7,5 +7,6 @@ obj-$(CONFIG_NFC_MICROREAD)	+= microread/
 obj-$(CONFIG_NFC_PN533)		+= pn533.o
 obj-$(CONFIG_NFC_WILINK)	+= nfcwilink.o
 obj-$(CONFIG_NFC_MEI_PHY)	+= mei_phy.o
+obj-$(CONFIG_NFC_SIM)		+= nfcsim.o
 
 ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG
diff --git a/drivers/nfc/nfcsim.c b/drivers/nfc/nfcsim.c
new file mode 100644
index 000000000000..c5c30fb1d7bf
--- /dev/null
+++ b/drivers/nfc/nfcsim.c
@@ -0,0 +1,541 @@
+/*
+ * NFC hardware simulation driver
+ * Copyright (c) 2013, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <net/nfc/nfc.h>
+
+#define DEV_ERR(_dev, fmt, args...) nfc_dev_err(&_dev->nfc_dev->dev, \
+						"%s: " fmt, __func__, ## args)
+
+#define DEV_DBG(_dev, fmt, args...) nfc_dev_dbg(&_dev->nfc_dev->dev, \
+						"%s: " fmt, __func__, ## args)
+
+#define NFCSIM_VERSION "0.1"
+
+#define NFCSIM_POLL_NONE	0
+#define NFCSIM_POLL_INITIATOR	1
+#define NFCSIM_POLL_TARGET	2
+#define NFCSIM_POLL_DUAL	(NFCSIM_POLL_INITIATOR | NFCSIM_POLL_TARGET)
+
+struct nfcsim {
+	struct nfc_dev *nfc_dev;
+
+	struct mutex lock;
+
+	struct delayed_work recv_work;
+
+	struct sk_buff *clone_skb;
+
+	struct delayed_work poll_work;
+	u8 polling_mode;
+	u8 curr_polling_mode;
+
+	u8 shutting_down;
+
+	u8 up;
+
+	u8 initiator;
+
+	data_exchange_cb_t cb;
+	void *cb_context;
+
+	struct nfcsim *peer_dev;
+};
+
+static struct nfcsim *dev0;
+static struct nfcsim *dev1;
+
+struct workqueue_struct *wq;
+
+static void nfcsim_cleanup_dev(struct nfcsim *dev, u8 shutdown)
+{
+	DEV_DBG(dev, "shutdown=%d", shutdown);
+
+	mutex_lock(&dev->lock);
+
+	dev->polling_mode = NFCSIM_POLL_NONE;
+	dev->shutting_down = shutdown;
+	dev->cb = NULL;
+	dev_kfree_skb(dev->clone_skb);
+	dev->clone_skb = NULL;
+
+	mutex_unlock(&dev->lock);
+
+	cancel_delayed_work_sync(&dev->poll_work);
+	cancel_delayed_work_sync(&dev->recv_work);
+}
+
+static int nfcsim_target_found(struct nfcsim *dev)
+{
+	struct nfc_target nfc_tgt;
+
+	DEV_DBG(dev, "");
+
+	memset(&nfc_tgt, 0, sizeof(struct nfc_target));
+
+	nfc_tgt.supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+	nfc_targets_found(dev->nfc_dev, &nfc_tgt, 1);
+
+	return 0;
+}
+
+static int nfcsim_dev_up(struct nfc_dev *nfc_dev)
+{
+	struct nfcsim *dev = nfc_get_drvdata(nfc_dev);
+
+	DEV_DBG(dev, "");
+
+	mutex_lock(&dev->lock);
+
+	dev->up = 1;
+
+	mutex_unlock(&dev->lock);
+
+	return 0;
+}
+
+static int nfcsim_dev_down(struct nfc_dev *nfc_dev)
+{
+	struct nfcsim *dev = nfc_get_drvdata(nfc_dev);
+
+	DEV_DBG(dev, "");
+
+	mutex_lock(&dev->lock);
+
+	dev->up = 0;
+
+	mutex_unlock(&dev->lock);
+
+	return 0;
+}
+
+static int nfcsim_dep_link_up(struct nfc_dev *nfc_dev,
+			      struct nfc_target *target,
+			      u8 comm_mode, u8 *gb, size_t gb_len)
+{
+	int rc;
+	struct nfcsim *dev = nfc_get_drvdata(nfc_dev);
+	struct nfcsim *peer = dev->peer_dev;
+	u8 *remote_gb;
+	size_t remote_gb_len;
+
+	DEV_DBG(dev, "target_idx: %d, comm_mode: %d\n", target->idx, comm_mode);
+
+	mutex_lock(&peer->lock);
+
+	nfc_tm_activated(peer->nfc_dev, NFC_PROTO_NFC_DEP_MASK,
+			 NFC_COMM_ACTIVE, gb, gb_len);
+
+	remote_gb = nfc_get_local_general_bytes(peer->nfc_dev, &remote_gb_len);
+	if (!remote_gb) {
+		DEV_ERR(peer, "Can't get remote general bytes");
+
+		mutex_unlock(&peer->lock);
+		return -EINVAL;
+	}
+
+	mutex_unlock(&peer->lock);
+
+	mutex_lock(&dev->lock);
+
+	rc = nfc_set_remote_general_bytes(nfc_dev, remote_gb, remote_gb_len);
+	if (rc) {
+		DEV_ERR(dev, "Can't set remote general bytes");
+		mutex_unlock(&dev->lock);
+		return rc;
+	}
+
+	rc = nfc_dep_link_is_up(nfc_dev, target->idx, NFC_COMM_ACTIVE,
+				NFC_RF_INITIATOR);
+
+	mutex_unlock(&dev->lock);
+
+	return rc;
+}
+
+static int nfcsim_dep_link_down(struct nfc_dev *nfc_dev)
+{
+	struct nfcsim *dev = nfc_get_drvdata(nfc_dev);
+
+	DEV_DBG(dev, "");
+
+	nfcsim_cleanup_dev(dev, 0);
+
+	return 0;
+}
+
+static int nfcsim_start_poll(struct nfc_dev *nfc_dev,
+			     u32 im_protocols, u32 tm_protocols)
+{
+	struct nfcsim *dev = nfc_get_drvdata(nfc_dev);
+	int rc;
+
+	mutex_lock(&dev->lock);
+
+	if (dev->polling_mode != NFCSIM_POLL_NONE) {
+		DEV_ERR(dev, "Already in polling mode");
+		rc = -EBUSY;
+		goto exit;
+	}
+
+	if (im_protocols & NFC_PROTO_NFC_DEP_MASK)
+		dev->polling_mode |= NFCSIM_POLL_INITIATOR;
+
+	if (tm_protocols & NFC_PROTO_NFC_DEP_MASK)
+		dev->polling_mode |= NFCSIM_POLL_TARGET;
+
+	if (dev->polling_mode == NFCSIM_POLL_NONE) {
+		DEV_ERR(dev, "Unsupported polling mode");
+		rc = -EINVAL;
+		goto exit;
+	}
+
+	dev->initiator = 0;
+	dev->curr_polling_mode = NFCSIM_POLL_NONE;
+
+	queue_delayed_work(wq, &dev->poll_work, 0);
+
+	DEV_DBG(dev, "Start polling: im: 0x%X, tm: 0x%X", im_protocols,
+		tm_protocols);
+
+	rc = 0;
+exit:
+	mutex_unlock(&dev->lock);
+
+	return rc;
+}
+
+static void nfcsim_stop_poll(struct nfc_dev *nfc_dev)
+{
+	struct nfcsim *dev = nfc_get_drvdata(nfc_dev);
+
+	DEV_DBG(dev, "Stop poll");
+
+	mutex_lock(&dev->lock);
+
+	dev->polling_mode = NFCSIM_POLL_NONE;
+
+	mutex_unlock(&dev->lock);
+
+	cancel_delayed_work_sync(&dev->poll_work);
+}
+
+static int nfcsim_activate_target(struct nfc_dev *nfc_dev,
+				  struct nfc_target *target, u32 protocol)
+{
+	struct nfcsim *dev = nfc_get_drvdata(nfc_dev);
+
+	DEV_DBG(dev, "");
+
+	return -ENOTSUPP;
+}
+
+static void nfcsim_deactivate_target(struct nfc_dev *nfc_dev,
+				     struct nfc_target *target)
+{
+	struct nfcsim *dev = nfc_get_drvdata(nfc_dev);
+
+	DEV_DBG(dev, "");
+}
+
+static void nfcsim_wq_recv(struct work_struct *work)
+{
+	struct nfcsim *dev = container_of(work, struct nfcsim,
+					  recv_work.work);
+
+	mutex_lock(&dev->lock);
+
+	if (dev->shutting_down || !dev->up || !dev->clone_skb) {
+		dev_kfree_skb(dev->clone_skb);
+		goto exit;
+	}
+
+	if (dev->initiator) {
+		if (!dev->cb) {
+			DEV_ERR(dev, "Null recv callback");
+			dev_kfree_skb(dev->clone_skb);
+			goto exit;
+		}
+
+		dev->cb(dev->cb_context, dev->clone_skb, 0);
+		dev->cb = NULL;
+	} else {
+		nfc_tm_data_received(dev->nfc_dev, dev->clone_skb);
+	}
+
+exit:
+	dev->clone_skb = NULL;
+
+	mutex_unlock(&dev->lock);
+}
+
+static int nfcsim_tx(struct nfc_dev *nfc_dev, struct nfc_target *target,
+		     struct sk_buff *skb, data_exchange_cb_t cb,
+		     void *cb_context)
+{
+	struct nfcsim *dev = nfc_get_drvdata(nfc_dev);
+	struct nfcsim *peer = dev->peer_dev;
+	int err;
+
+	mutex_lock(&dev->lock);
+
+	if (dev->shutting_down || !dev->up) {
+		mutex_unlock(&dev->lock);
+		err = -ENODEV;
+		goto exit;
+	}
+
+	dev->cb = cb;
+	dev->cb_context = cb_context;
+
+	mutex_unlock(&dev->lock);
+
+	mutex_lock(&peer->lock);
+
+	peer->clone_skb = skb_clone(skb, GFP_KERNEL);
+
+	if (!peer->clone_skb) {
+		DEV_ERR(dev, "skb_clone failed");
+		mutex_unlock(&peer->lock);
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	/* This simulates an arbitrary transmission delay between the 2 devices.
+	 * If packet transmission occurs immediately between them, we have a
+	 * non-stop flow of several tens of thousands SYMM packets per second
+	 * and a burning cpu.
+	 *
+	 * TODO: Add support for a sysfs entry to control this delay.
+	 */
+	queue_delayed_work(wq, &peer->recv_work, msecs_to_jiffies(5));
+
+	mutex_unlock(&peer->lock);
+
+	err = 0;
+exit:
+	dev_kfree_skb(skb);
+
+	return err;
+}
+
+static int nfcsim_im_transceive(struct nfc_dev *nfc_dev,
+				struct nfc_target *target, struct sk_buff *skb,
+				data_exchange_cb_t cb, void *cb_context)
+{
+	return nfcsim_tx(nfc_dev, target, skb, cb, cb_context);
+}
+
+static int nfcsim_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb)
+{
+	return nfcsim_tx(nfc_dev, NULL, skb, NULL, NULL);
+}
+
+static struct nfc_ops nfcsim_nfc_ops = {
+	.dev_up = nfcsim_dev_up,
+	.dev_down = nfcsim_dev_down,
+	.dep_link_up = nfcsim_dep_link_up,
+	.dep_link_down = nfcsim_dep_link_down,
+	.start_poll = nfcsim_start_poll,
+	.stop_poll = nfcsim_stop_poll,
+	.activate_target = nfcsim_activate_target,
+	.deactivate_target = nfcsim_deactivate_target,
+	.im_transceive = nfcsim_im_transceive,
+	.tm_send = nfcsim_tm_send,
+};
+
+static void nfcsim_set_polling_mode(struct nfcsim *dev)
+{
+	if (dev->polling_mode == NFCSIM_POLL_NONE) {
+		dev->curr_polling_mode = NFCSIM_POLL_NONE;
+		return;
+	}
+
+	if (dev->curr_polling_mode == NFCSIM_POLL_NONE) {
+		if (dev->polling_mode & NFCSIM_POLL_INITIATOR)
+			dev->curr_polling_mode = NFCSIM_POLL_INITIATOR;
+		else
+			dev->curr_polling_mode = NFCSIM_POLL_TARGET;
+
+		return;
+	}
+
+	if (dev->polling_mode == NFCSIM_POLL_DUAL) {
+		if (dev->curr_polling_mode == NFCSIM_POLL_TARGET)
+			dev->curr_polling_mode = NFCSIM_POLL_INITIATOR;
+		else
+			dev->curr_polling_mode = NFCSIM_POLL_TARGET;
+	}
+}
+
+static void nfcsim_wq_poll(struct work_struct *work)
+{
+	struct nfcsim *dev = container_of(work, struct nfcsim, poll_work.work);
+	struct nfcsim *peer = dev->peer_dev;
+
+	/* These work items run on an ordered workqueue and are therefore
+	 * serialized. So we can take both mutexes without being dead locked.
+	 */
+	mutex_lock(&dev->lock);
+	mutex_lock(&peer->lock);
+
+	nfcsim_set_polling_mode(dev);
+
+	if (dev->curr_polling_mode == NFCSIM_POLL_NONE) {
+		DEV_DBG(dev, "Not polling");
+		goto unlock;
+	}
+
+	DEV_DBG(dev, "Polling as %s",
+		dev->curr_polling_mode == NFCSIM_POLL_INITIATOR ?
+		"initiator" : "target");
+
+	if (dev->curr_polling_mode == NFCSIM_POLL_TARGET)
+		goto sched_work;
+
+	if (peer->curr_polling_mode == NFCSIM_POLL_TARGET) {
+		peer->polling_mode = NFCSIM_POLL_NONE;
+		dev->polling_mode = NFCSIM_POLL_NONE;
+
+		dev->initiator = 1;
+
+		nfcsim_target_found(dev);
+
+		goto unlock;
+	}
+
+sched_work:
+	/* This defines the delay for an initiator to check if the other device
+	 * is polling in target mode.
+	 * If the device starts in dual mode polling, it switches between
+	 * initiator and target at every round.
+	 * Because the wq is ordered and only 1 work item is executed at a time,
+	 * we'll always have one device polling as initiator and the other as
+	 * target at some point, even if both are started in dual mode.
+	 */
+	queue_delayed_work(wq, &dev->poll_work, msecs_to_jiffies(200));
+
+unlock:
+	mutex_unlock(&peer->lock);
+	mutex_unlock(&dev->lock);
+}
+
+static struct nfcsim *nfcsim_init_dev(void)
+{
+	struct nfcsim *dev;
+	int rc = -ENOMEM;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&dev->lock);
+
+	INIT_DELAYED_WORK(&dev->recv_work, nfcsim_wq_recv);
+	INIT_DELAYED_WORK(&dev->poll_work, nfcsim_wq_poll);
+
+	dev->nfc_dev = nfc_allocate_device(&nfcsim_nfc_ops,
+					   NFC_PROTO_NFC_DEP_MASK,
+					   0, 0);
+	if (!dev->nfc_dev)
+		goto error;
+
+	nfc_set_drvdata(dev->nfc_dev, dev);
+
+	rc = nfc_register_device(dev->nfc_dev);
+	if (rc)
+		goto free_nfc_dev;
+
+	return dev;
+
+free_nfc_dev:
+	nfc_free_device(dev->nfc_dev);
+
+error:
+	kfree(dev);
+
+	return ERR_PTR(rc);
+}
+
+static void nfcsim_free_device(struct nfcsim *dev)
+{
+	nfc_unregister_device(dev->nfc_dev);
+
+	nfc_free_device(dev->nfc_dev);
+
+	kfree(dev);
+}
+
+int __init nfcsim_init(void)
+{
+	int rc;
+
+	/* We need an ordered wq to ensure that poll_work items are executed
+	 * one at a time.
+	 */
+	wq = alloc_ordered_workqueue("nfcsim", 0);
+	if (!wq) {
+		rc = -ENOMEM;
+		goto exit;
+	}
+
+	dev0 = nfcsim_init_dev();
+	if (IS_ERR(dev0)) {
+		rc = PTR_ERR(dev0);
+		goto exit;
+	}
+
+	dev1 = nfcsim_init_dev();
+	if (IS_ERR(dev1)) {
+		kfree(dev0);
+
+		rc = PTR_ERR(dev1);
+		goto exit;
+	}
+
+	dev0->peer_dev = dev1;
+	dev1->peer_dev = dev0;
+
+	pr_debug("NFCsim " NFCSIM_VERSION " initialized\n");
+
+	rc = 0;
+exit:
+	if (rc)
+		pr_err("Failed to initialize nfcsim driver (%d)\n",
+		       rc);
+
+	return rc;
+}
+
+void __exit nfcsim_exit(void)
+{
+	nfcsim_cleanup_dev(dev0, 1);
+	nfcsim_cleanup_dev(dev1, 1);
+
+	nfcsim_free_device(dev0);
+	nfcsim_free_device(dev1);
+
+	destroy_workqueue(wq);
+}
+
+module_init(nfcsim_init);
+module_exit(nfcsim_exit);
+
+MODULE_DESCRIPTION("NFCSim driver ver " NFCSIM_VERSION);
+MODULE_VERSION(NFCSIM_VERSION);
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From bda7eb27635c4d7414fb05a5f55501b71f436cc0 Mon Sep 17 00:00:00 2001
From: Valentin Ilie <valentin.ilie@gmail.com>
Date: Fri, 7 Jun 2013 22:01:55 +0300
Subject: NFC: mei_phy: Clean up file

Fix checkpatch warnings.
Replace __attribute__((__packed__)) with __packed.
Replace spaces with tabs.

Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/nfc/mei_phy.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/nfc/mei_phy.c b/drivers/nfc/mei_phy.c
index 1201bdbfb791..606bf55e76ec 100644
--- a/drivers/nfc/mei_phy.c
+++ b/drivers/nfc/mei_phy.c
@@ -30,7 +30,7 @@ struct mei_nfc_hdr {
 	u16 req_id;
 	u32 reserved;
 	u16 data_size;
-} __attribute__((packed));
+} __packed;
 
 #define MEI_NFC_MAX_READ (MEI_NFC_HEADER_SIZE + MEI_NFC_MAX_HCI_PAYLOAD)
 
@@ -60,8 +60,8 @@ int nfc_mei_phy_enable(void *phy_id)
 
 	r = mei_cl_enable_device(phy->device);
 	if (r < 0) {
-                pr_err("MEI_PHY: Could not enable device\n");
-                return r;
+		pr_err("MEI_PHY: Could not enable device\n");
+		return r;
 	}
 
 	r = mei_cl_register_event_cb(phy->device, nfc_mei_event_cb, phy);
-- 
cgit v1.2.3


From 9b60b64bfe98b9cc01b21e6126819b11a0f0a971 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Thu, 13 Jun 2013 22:51:26 +0530
Subject: ath9k: Add custom parameters for CUS198

CUS198 is a card based on AR9485. There are differences
between the base reference design HB125 and CUS198.
Identify such cards based on the PCI subsystem IDs and
set HW parameters appropriately.

Addresses this bug - https://bugzilla.kernel.org/show_bug.cgi?id=49201

Cc: jkp@iki.fi
Cc: gfmichaud@gmail.com
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 18 +++++++++++++---
 drivers/net/wireless/ath/ath9k/ath9k.h         |  3 +++
 drivers/net/wireless/ath/ath9k/hw.h            |  4 ++++
 drivers/net/wireless/ath/ath9k/init.c          | 21 +++++++++++++++++++
 drivers/net/wireless/ath/ath9k/pci.c           | 29 ++++++++++++++++++++++++++
 5 files changed, 72 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 25b8bbbe74fe..9a00bc0a9304 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3563,16 +3563,22 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
 {
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	int chain;
-	u32 regval, value;
+	u32 regval, value, gpio;
 	static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = {
 			AR_PHY_SWITCH_CHAIN_0,
 			AR_PHY_SWITCH_CHAIN_1,
 			AR_PHY_SWITCH_CHAIN_2,
 	};
 
-	if (AR_SREV_9485(ah) && (ar9003_hw_get_rx_gain_idx(ah) == 0))
+	if (AR_SREV_9485(ah) && (ar9003_hw_get_rx_gain_idx(ah) == 0)) {
+		if (ah->config.xlna_gpio)
+			gpio = ah->config.xlna_gpio;
+		else
+			gpio = AR9300_EXT_LNA_CTL_GPIO_AR9485;
+
 		ath9k_hw_cfg_output(ah, AR9300_EXT_LNA_CTL_GPIO_AR9485,
 				    AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED);
+	}
 
 	value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
 
@@ -3800,7 +3806,13 @@ static void ar9003_hw_atten_apply(struct ath_hw *ah, struct ath9k_channel *chan)
 			REG_RMW_FIELD(ah, ext_atten_reg[i],
 				      AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value);
 
-			value = ar9003_hw_atten_chain_get_margin(ah, i, chan);
+			if (AR_SREV_9485(ah) &&
+			    (ar9003_hw_get_rx_gain_idx(ah) == 0) &&
+			    ah->config.xatten_margin_cfg)
+				value = 5;
+			else
+				value = ar9003_hw_atten_chain_get_margin(ah, i, chan);
+
 			REG_RMW_FIELD(ah, ext_atten_reg[i],
 				      AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN,
 				      value);
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index a6e666bcc0a7..74965eefbd1c 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -631,6 +631,8 @@ void ath_ant_comb_update(struct ath_softc *sc);
 /* Main driver core */
 /********************/
 
+#define ATH9K_PCI_CUS198 0x0001
+
 /*
  * Default cache line size, in bytes.
  * Used when PCI device not fully initialized by bootrom/BIOS
@@ -715,6 +717,7 @@ struct ath_softc {
 
 	unsigned int hw_busy_count;
 	unsigned long sc_flags;
+	unsigned long driver_data;
 
 	u32 intrstatus;
 	u16 ps_flags; /* PS_* */
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 7d259b7dc254..ed7d4fcbdcab 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -307,6 +307,10 @@ struct ath9k_ops_config {
 	u16 spurchans[AR_EEPROM_MODAL_SPURS][2];
 	u8 max_txtrig_level;
 	u16 ani_poll_interval; /* ANI poll interval in ms */
+
+	/* Platform specific config */
+	u32 xlna_gpio;
+	bool xatten_margin_cfg;
 };
 
 enum ath9k_int {
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 818f22daa8ba..7c2ed1cef9b7 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -513,6 +513,22 @@ static void ath9k_init_misc(struct ath_softc *sc)
 	sc->spec_config.fft_period = 0xF;
 }
 
+static void ath9k_init_platform(struct ath_softc *sc)
+{
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	if (common->bus_ops->ath_bus_type != ATH_PCI)
+		return;
+
+	if (sc->driver_data & ATH9K_PCI_CUS198) {
+		ah->config.xlna_gpio = 9;
+		ah->config.xatten_margin_cfg = true;
+
+		ath_info(common, "Set parameters for CUS198\n");
+	}
+}
+
 static void ath9k_eeprom_request_cb(const struct firmware *eeprom_blob,
 				    void *ctx)
 {
@@ -604,6 +620,11 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
 	common->btcoex_enabled = ath9k_btcoex_enable == 1;
 	common->disable_ani = false;
 
+	/*
+	 * Platform quirks.
+	 */
+	ath9k_init_platform(sc);
+
 	/*
 	 * Enable Antenna diversity only when BTCOEX is disabled
 	 * and the user manually requests the feature.
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 0e0d39583837..4ac00b4b0d25 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -34,6 +34,34 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
 	{ PCI_VDEVICE(ATHEROS, 0x002D) }, /* PCI   */
 	{ PCI_VDEVICE(ATHEROS, 0x002E) }, /* PCI-E */
 	{ PCI_VDEVICE(ATHEROS, 0x0030) }, /* PCI-E  AR9300 */
+
+	/* PCI-E CUS198 */
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+			 0x0032,
+			 PCI_VENDOR_ID_AZWAVE,
+			 0x2086),
+	  .driver_data = ATH9K_PCI_CUS198 },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+			 0x0032,
+			 PCI_VENDOR_ID_AZWAVE,
+			 0x1237),
+	  .driver_data = ATH9K_PCI_CUS198 },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+			 0x0032,
+			 PCI_VENDOR_ID_AZWAVE,
+			 0x2126),
+	  .driver_data = ATH9K_PCI_CUS198 },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+			 0x0032,
+			 PCI_VENDOR_ID_AZWAVE,
+			 0x2152),
+	  .driver_data = ATH9K_PCI_CUS198 },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+			 0x0032,
+			 PCI_VENDOR_ID_FOXCONN,
+			 0xE075),
+	  .driver_data = ATH9K_PCI_CUS198 },
+
 	{ PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E  AR9485 */
 	{ PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E  AR9580 */
 	{ PCI_VDEVICE(ATHEROS, 0x0034) }, /* PCI-E  AR9462 */
@@ -221,6 +249,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	sc->hw = hw;
 	sc->dev = &pdev->dev;
 	sc->mem = pcim_iomap_table(pdev)[0];
+	sc->driver_data = id->driver_data;
 
 	/* Will be cleared in ath9k_start() */
 	set_bit(SC_OP_INVALID, &sc->sc_flags);
-- 
cgit v1.2.3


From 1105a13bb8ad29cf83d46989ee462d196038be87 Mon Sep 17 00:00:00 2001
From: Alexey Khoroshilov <khoroshilov@ispras.ru>
Date: Fri, 14 Jun 2013 00:26:11 +0400
Subject: orinoco_usb: fix memory leak in ezusb_access_ltv() when device
 disconnected

If "device is disconnected" check occurs to be true in ezusb_access_ltv(),
it just return -ENODEV. But that means request_context is leaked since
there are no any references to it anymore.
The patch adds a call to ezusb_request_context_put() before return.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/orinoco/orinoco_usb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c
index 1f9cb55c3360..bdfe637953f4 100644
--- a/drivers/net/wireless/orinoco/orinoco_usb.c
+++ b/drivers/net/wireless/orinoco/orinoco_usb.c
@@ -881,7 +881,8 @@ static int ezusb_access_ltv(struct ezusb_priv *upriv,
 
 	if (!upriv->udev) {
 		dbg("Device disconnected");
-		return -ENODEV;
+		retval = -ENODEV;
+		goto exit;
 	}
 
 	if (upriv->read_urb->status != -EINPROGRESS)
-- 
cgit v1.2.3


From e3b8bbb9e81536f19d6e0b2c6e8186db47dfd426 Mon Sep 17 00:00:00 2001
From: Ido Reis <idor@ti.com>
Date: Tue, 27 Nov 2012 08:44:51 +0200
Subject: wl18xx: FDSP Code RAM Corruption fix

In PG2.0 there is an issue where PHY's FDSP Code RAM sometimes gets
corrupted when exiting from ELP mode. This issue is related to FDSP
Code RAM clock implementation.

PG2.1 introduces a HW fix for this issue that requires the driver to
change the FDSP Code Ram clock settings (mux it to ATGP clock instead
of its own clock).

This workaround uses PHY_FPGA_SPARE_1 register and is relevant to WL8
PG2.1 devices.

The fix is also backward compatible with older PG2.0 devices where the
register PHY_FPGA_SPARE_1 is not used and not connected.

The fix is done in the wl18xx_pre_upload function (must be performed
before uploading the FW code) and includes the following steps:

1. Disable FDSP clock
2. Set ATPG clock toward FDSP Code RAM rather than its own clock.
3. Re-enable FDSP clock

Signed-off-by: Yair Shapira <yair.shapira@ti.com>
Signed-off-by: Ido Reis <idor@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl18xx/main.c | 36 +++++++++++++++++++++++++++++++++--
 drivers/net/wireless/ti/wl18xx/reg.h  | 15 +++++++++++++++
 2 files changed, 49 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 9fa692d11025..ae85ae46c61b 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -594,8 +594,8 @@ static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = {
 		.mem3 = { .start = 0x00000000, .size  = 0x00000000 },
 	},
 	[PART_PHY_INIT] = {
-		.mem  = { .start = 0x80926000,
-			  .size = sizeof(struct wl18xx_mac_and_phy_params) },
+		.mem  = { .start = WL18XX_PHY_INIT_MEM_ADDR,
+			  .size  = WL18XX_PHY_INIT_MEM_SIZE },
 		.reg  = { .start = 0x00000000, .size = 0x00000000 },
 		.mem2 = { .start = 0x00000000, .size = 0x00000000 },
 		.mem3 = { .start = 0x00000000, .size = 0x00000000 },
@@ -799,6 +799,9 @@ static int wl18xx_pre_upload(struct wl1271 *wl)
 	u32 tmp;
 	int ret;
 
+	BUILD_BUG_ON(sizeof(struct wl18xx_mac_and_phy_params) >
+		WL18XX_PHY_INIT_MEM_SIZE);
+
 	ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
 	if (ret < 0)
 		goto out;
@@ -815,6 +818,35 @@ static int wl18xx_pre_upload(struct wl1271 *wl)
 	wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
 
 	ret = wlcore_read32(wl, WL18XX_SCR_PAD2, &tmp);
+	if (ret < 0)
+		goto out;
+
+	/*
+	 * Workaround for FDSP code RAM corruption (needed for PG2.1
+	 * and newer; for older chips it's a NOP).  Change FDSP clock
+	 * settings so that it's muxed to the ATGP clock instead of
+	 * its own clock.
+	 */
+
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
+	if (ret < 0)
+		goto out;
+
+	/* disable FDSP clock */
+	ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1,
+			     MEM_FDSP_CLK_120_DISABLE);
+	if (ret < 0)
+		goto out;
+
+	/* set ATPG clock toward FDSP Code RAM rather than its own clock */
+	ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1,
+			     MEM_FDSP_CODERAM_FUNC_CLK_SEL);
+	if (ret < 0)
+		goto out;
+
+	/* re-enable FDSP clock */
+	ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1,
+			     MEM_FDSP_CLK_120_ENABLE);
 
 out:
 	return ret;
diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h
index 6306e04cd258..05dd8bad2746 100644
--- a/drivers/net/wireless/ti/wl18xx/reg.h
+++ b/drivers/net/wireless/ti/wl18xx/reg.h
@@ -38,6 +38,9 @@
 #define WL18XX_REG_BOOT_PART_SIZE  0x00014578
 
 #define WL18XX_PHY_INIT_MEM_ADDR   0x80926000
+#define WL18XX_PHY_END_MEM_ADDR	   0x8093CA44
+#define WL18XX_PHY_INIT_MEM_SIZE \
+	(WL18XX_PHY_END_MEM_ADDR - WL18XX_PHY_INIT_MEM_ADDR)
 
 #define WL18XX_SDIO_WSPI_BASE		(WL18XX_REGISTERS_BASE)
 #define WL18XX_REG_CONFIG_BASE		(WL18XX_REGISTERS_BASE + 0x02000)
@@ -217,4 +220,16 @@ static const char * const rdl_names[] = {
 	[RDL_4_SP]	= "1897 MIMO",
 };
 
+/* FPGA_SPARE_1 register - used to change the PHY ATPG clock at boot time */
+#define WL18XX_PHY_FPGA_SPARE_1		0x8093CA40
+
+/* command to disable FDSP clock */
+#define MEM_FDSP_CLK_120_DISABLE        0x80000000
+
+/* command to set ATPG clock toward FDSP Code RAM rather than its own clock */
+#define MEM_FDSP_CODERAM_FUNC_CLK_SEL	0xC0000000
+
+/* command to re-enable FDSP clock */
+#define MEM_FDSP_CLK_120_ENABLE		0x40000000
+
 #endif /* __REG_H__ */
-- 
cgit v1.2.3


From 8f6ac537b50077b3f2b0e926b661a064dc136a2a Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Sat, 4 May 2013 01:06:11 +0300
Subject: wlcore: some non-functional clean-ups in main.c

Remove unnecessary includes; remove duplicate and useless defines; fix
copyright notice and remove some unnecessary line breaks.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 30 ++++++------------------------
 1 file changed, 6 insertions(+), 24 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 796928ba875f..32d877f1c684 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1,10 +1,9 @@
 
 /*
- * This file is part of wl1271
+ * This file is part of wlcore
  *
  * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ * Copyright (C) 2011-2013 Texas Instruments Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -24,37 +23,25 @@
 
 #include <linux/module.h>
 #include <linux/firmware.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/crc32.h>
 #include <linux/etherdevice.h>
 #include <linux/vmalloc.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
 #include <linux/wl12xx.h>
-#include <linux/sched.h>
 #include <linux/interrupt.h>
 
 #include "wlcore.h"
 #include "debug.h"
 #include "wl12xx_80211.h"
 #include "io.h"
-#include "event.h"
 #include "tx.h"
-#include "rx.h"
 #include "ps.h"
 #include "init.h"
 #include "debugfs.h"
-#include "cmd.h"
-#include "boot.h"
 #include "testmode.h"
 #include "scan.h"
 #include "hw_ops.h"
 
 #define WL1271_BOOT_RETRIES 3
 
-#define WL1271_BOOT_RETRIES 3
-
 static char *fwlog_param;
 static int bug_on_recovery = -1;
 static int no_recovery     = -1;
@@ -65,8 +52,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl,
 static void wlcore_op_stop_locked(struct wl1271 *wl);
 static void wl1271_free_ap_keys(struct wl1271 *wl, struct wl12xx_vif *wlvif);
 
-static int wl12xx_set_authorized(struct wl1271 *wl,
-				 struct wl12xx_vif *wlvif)
+static int wl12xx_set_authorized(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 {
 	int ret;
 
@@ -1668,8 +1654,7 @@ static int wl1271_configure_suspend(struct wl1271 *wl,
 	return 0;
 }
 
-static void wl1271_configure_resume(struct wl1271 *wl,
-				    struct wl12xx_vif *wlvif)
+static void wl1271_configure_resume(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 {
 	int ret = 0;
 	bool is_ap = wlvif->bss_type == BSS_TYPE_AP_BSS;
@@ -3782,8 +3767,7 @@ static int wlcore_set_beacon_template(struct wl1271 *wl,
 	struct ieee80211_hdr *hdr;
 	u32 min_rate;
 	int ret;
-	int ieoffset = offsetof(struct ieee80211_mgmt,
-				u.beacon.variable);
+	int ieoffset = offsetof(struct ieee80211_mgmt, u.beacon.variable);
 	struct sk_buff *beacon = ieee80211_beacon_get(wl->hw, vif);
 	u16 tmpl_id;
 
@@ -5827,8 +5811,6 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
 	return 0;
 }
 
-#define WL1271_DEFAULT_CHANNEL 0
-
 struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size,
 				     u32 mbox_size)
 {
@@ -5881,7 +5863,7 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size,
 		goto err_hw;
 	}
 
-	wl->channel = WL1271_DEFAULT_CHANNEL;
+	wl->channel = 0;
 	wl->rx_counter = 0;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
 	wl->band = IEEE80211_BAND_2GHZ;
-- 
cgit v1.2.3


From 33cab57a50531756f28199d63b1a529bc9e01605 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Sat, 4 May 2013 02:46:38 +0300
Subject: wlcore: move sysfs handling to a separate file

Instead of doing all the sysfs file handling in the main file, move it
to a new sysfs source file to reduce the amount of code in a single
file.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/Makefile |   2 +-
 drivers/net/wireless/ti/wlcore/main.c   | 178 +-------------------------
 drivers/net/wireless/ti/wlcore/sysfs.c  | 216 ++++++++++++++++++++++++++++++++
 drivers/net/wireless/ti/wlcore/sysfs.h  |  28 +++++
 4 files changed, 249 insertions(+), 175 deletions(-)
 create mode 100644 drivers/net/wireless/ti/wlcore/sysfs.c
 create mode 100644 drivers/net/wireless/ti/wlcore/sysfs.h

(limited to 'drivers')

diff --git a/drivers/net/wireless/ti/wlcore/Makefile b/drivers/net/wireless/ti/wlcore/Makefile
index b21398f6c3ec..4f23931d7bd5 100644
--- a/drivers/net/wireless/ti/wlcore/Makefile
+++ b/drivers/net/wireless/ti/wlcore/Makefile
@@ -1,5 +1,5 @@
 wlcore-objs		= main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \
-			  boot.o init.o debugfs.o scan.o
+			  boot.o init.o debugfs.o scan.o sysfs.o
 
 wlcore_spi-objs 	= spi.o
 wlcore_sdio-objs	= sdio.o
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 32d877f1c684..600ed7bc38db 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -39,6 +39,7 @@
 #include "testmode.h"
 #include "scan.h"
 #include "hw_ops.h"
+#include "sysfs.h"
 
 #define WL1271_BOOT_RETRIES 3
 
@@ -5387,151 +5388,6 @@ u8 wlcore_rate_to_idx(struct wl1271 *wl, u8 rate, enum ieee80211_band band)
 	return idx;
 }
 
-static ssize_t wl1271_sysfs_show_bt_coex_state(struct device *dev,
-					       struct device_attribute *attr,
-					       char *buf)
-{
-	struct wl1271 *wl = dev_get_drvdata(dev);
-	ssize_t len;
-
-	len = PAGE_SIZE;
-
-	mutex_lock(&wl->mutex);
-	len = snprintf(buf, len, "%d\n\n0 - off\n1 - on\n",
-		       wl->sg_enabled);
-	mutex_unlock(&wl->mutex);
-
-	return len;
-
-}
-
-static ssize_t wl1271_sysfs_store_bt_coex_state(struct device *dev,
-						struct device_attribute *attr,
-						const char *buf, size_t count)
-{
-	struct wl1271 *wl = dev_get_drvdata(dev);
-	unsigned long res;
-	int ret;
-
-	ret = kstrtoul(buf, 10, &res);
-	if (ret < 0) {
-		wl1271_warning("incorrect value written to bt_coex_mode");
-		return count;
-	}
-
-	mutex_lock(&wl->mutex);
-
-	res = !!res;
-
-	if (res == wl->sg_enabled)
-		goto out;
-
-	wl->sg_enabled = res;
-
-	if (unlikely(wl->state != WLCORE_STATE_ON))
-		goto out;
-
-	ret = wl1271_ps_elp_wakeup(wl);
-	if (ret < 0)
-		goto out;
-
-	wl1271_acx_sg_enable(wl, wl->sg_enabled);
-	wl1271_ps_elp_sleep(wl);
-
- out:
-	mutex_unlock(&wl->mutex);
-	return count;
-}
-
-static DEVICE_ATTR(bt_coex_state, S_IRUGO | S_IWUSR,
-		   wl1271_sysfs_show_bt_coex_state,
-		   wl1271_sysfs_store_bt_coex_state);
-
-static ssize_t wl1271_sysfs_show_hw_pg_ver(struct device *dev,
-					   struct device_attribute *attr,
-					   char *buf)
-{
-	struct wl1271 *wl = dev_get_drvdata(dev);
-	ssize_t len;
-
-	len = PAGE_SIZE;
-
-	mutex_lock(&wl->mutex);
-	if (wl->hw_pg_ver >= 0)
-		len = snprintf(buf, len, "%d\n", wl->hw_pg_ver);
-	else
-		len = snprintf(buf, len, "n/a\n");
-	mutex_unlock(&wl->mutex);
-
-	return len;
-}
-
-static DEVICE_ATTR(hw_pg_ver, S_IRUGO,
-		   wl1271_sysfs_show_hw_pg_ver, NULL);
-
-static ssize_t wl1271_sysfs_read_fwlog(struct file *filp, struct kobject *kobj,
-				       struct bin_attribute *bin_attr,
-				       char *buffer, loff_t pos, size_t count)
-{
-	struct device *dev = container_of(kobj, struct device, kobj);
-	struct wl1271 *wl = dev_get_drvdata(dev);
-	ssize_t len;
-	int ret;
-
-	ret = mutex_lock_interruptible(&wl->mutex);
-	if (ret < 0)
-		return -ERESTARTSYS;
-
-	/* Let only one thread read the log at a time, blocking others */
-	while (wl->fwlog_size == 0) {
-		DEFINE_WAIT(wait);
-
-		prepare_to_wait_exclusive(&wl->fwlog_waitq,
-					  &wait,
-					  TASK_INTERRUPTIBLE);
-
-		if (wl->fwlog_size != 0) {
-			finish_wait(&wl->fwlog_waitq, &wait);
-			break;
-		}
-
-		mutex_unlock(&wl->mutex);
-
-		schedule();
-		finish_wait(&wl->fwlog_waitq, &wait);
-
-		if (signal_pending(current))
-			return -ERESTARTSYS;
-
-		ret = mutex_lock_interruptible(&wl->mutex);
-		if (ret < 0)
-			return -ERESTARTSYS;
-	}
-
-	/* Check if the fwlog is still valid */
-	if (wl->fwlog_size < 0) {
-		mutex_unlock(&wl->mutex);
-		return 0;
-	}
-
-	/* Seeking is not supported - old logs are not kept. Disregard pos. */
-	len = min(count, (size_t)wl->fwlog_size);
-	wl->fwlog_size -= len;
-	memcpy(buffer, wl->fwlog, len);
-
-	/* Make room for new messages */
-	memmove(wl->fwlog, wl->fwlog + len, wl->fwlog_size);
-
-	mutex_unlock(&wl->mutex);
-
-	return len;
-}
-
-static struct bin_attribute fwlog_attr = {
-	.attr = {.name = "fwlog", .mode = S_IRUSR},
-	.read = wl1271_sysfs_read_fwlog,
-};
-
 static void wl12xx_derive_mac_addresses(struct wl1271 *wl, u32 oui, u32 nic)
 {
 	int i;
@@ -5970,11 +5826,8 @@ int wlcore_free_hw(struct wl1271 *wl)
 	wake_up_interruptible_all(&wl->fwlog_waitq);
 	mutex_unlock(&wl->mutex);
 
-	device_remove_bin_file(wl->dev, &fwlog_attr);
-
-	device_remove_file(wl->dev, &dev_attr_hw_pg_ver);
+	wlcore_sysfs_free(wl);
 
-	device_remove_file(wl->dev, &dev_attr_bt_coex_state);
 	kfree(wl->buffer_32);
 	kfree(wl->mbox);
 	free_page((unsigned long)wl->fwlog);
@@ -6086,36 +5939,13 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 	if (ret)
 		goto out_irq;
 
-	/* Create sysfs file to control bt coex state */
-	ret = device_create_file(wl->dev, &dev_attr_bt_coex_state);
-	if (ret < 0) {
-		wl1271_error("failed to create sysfs file bt_coex_state");
+	ret = wlcore_sysfs_init(wl);
+	if (ret)
 		goto out_unreg;
-	}
-
-	/* Create sysfs file to get HW PG version */
-	ret = device_create_file(wl->dev, &dev_attr_hw_pg_ver);
-	if (ret < 0) {
-		wl1271_error("failed to create sysfs file hw_pg_ver");
-		goto out_bt_coex_state;
-	}
-
-	/* Create sysfs file for the FW log */
-	ret = device_create_bin_file(wl->dev, &fwlog_attr);
-	if (ret < 0) {
-		wl1271_error("failed to create sysfs file fwlog");
-		goto out_hw_pg_ver;
-	}
 
 	wl->initialized = true;
 	goto out;
 
-out_hw_pg_ver:
-	device_remove_file(wl->dev, &dev_attr_hw_pg_ver);
-
-out_bt_coex_state:
-	device_remove_file(wl->dev, &dev_attr_bt_coex_state);
-
 out_unreg:
 	wl1271_unregister_hw(wl);
 
diff --git a/drivers/net/wireless/ti/wlcore/sysfs.c b/drivers/net/wireless/ti/wlcore/sysfs.c
new file mode 100644
index 000000000000..8e583497940d
--- /dev/null
+++ b/drivers/net/wireless/ti/wlcore/sysfs.c
@@ -0,0 +1,216 @@
+/*
+ * This file is part of wlcore
+ *
+ * Copyright (C) 2013 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wlcore.h"
+#include "debug.h"
+#include "ps.h"
+#include "sysfs.h"
+
+static ssize_t wl1271_sysfs_show_bt_coex_state(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	struct wl1271 *wl = dev_get_drvdata(dev);
+	ssize_t len;
+
+	len = PAGE_SIZE;
+
+	mutex_lock(&wl->mutex);
+	len = snprintf(buf, len, "%d\n\n0 - off\n1 - on\n",
+		       wl->sg_enabled);
+	mutex_unlock(&wl->mutex);
+
+	return len;
+
+}
+
+static ssize_t wl1271_sysfs_store_bt_coex_state(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf, size_t count)
+{
+	struct wl1271 *wl = dev_get_drvdata(dev);
+	unsigned long res;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &res);
+	if (ret < 0) {
+		wl1271_warning("incorrect value written to bt_coex_mode");
+		return count;
+	}
+
+	mutex_lock(&wl->mutex);
+
+	res = !!res;
+
+	if (res == wl->sg_enabled)
+		goto out;
+
+	wl->sg_enabled = res;
+
+	if (unlikely(wl->state != WLCORE_STATE_ON))
+		goto out;
+
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	wl1271_acx_sg_enable(wl, wl->sg_enabled);
+	wl1271_ps_elp_sleep(wl);
+
+ out:
+	mutex_unlock(&wl->mutex);
+	return count;
+}
+
+static DEVICE_ATTR(bt_coex_state, S_IRUGO | S_IWUSR,
+		   wl1271_sysfs_show_bt_coex_state,
+		   wl1271_sysfs_store_bt_coex_state);
+
+static ssize_t wl1271_sysfs_show_hw_pg_ver(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct wl1271 *wl = dev_get_drvdata(dev);
+	ssize_t len;
+
+	len = PAGE_SIZE;
+
+	mutex_lock(&wl->mutex);
+	if (wl->hw_pg_ver >= 0)
+		len = snprintf(buf, len, "%d\n", wl->hw_pg_ver);
+	else
+		len = snprintf(buf, len, "n/a\n");
+	mutex_unlock(&wl->mutex);
+
+	return len;
+}
+
+static DEVICE_ATTR(hw_pg_ver, S_IRUGO,
+		   wl1271_sysfs_show_hw_pg_ver, NULL);
+
+static ssize_t wl1271_sysfs_read_fwlog(struct file *filp, struct kobject *kobj,
+				       struct bin_attribute *bin_attr,
+				       char *buffer, loff_t pos, size_t count)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct wl1271 *wl = dev_get_drvdata(dev);
+	ssize_t len;
+	int ret;
+
+	ret = mutex_lock_interruptible(&wl->mutex);
+	if (ret < 0)
+		return -ERESTARTSYS;
+
+	/* Let only one thread read the log at a time, blocking others */
+	while (wl->fwlog_size == 0) {
+		DEFINE_WAIT(wait);
+
+		prepare_to_wait_exclusive(&wl->fwlog_waitq,
+					  &wait,
+					  TASK_INTERRUPTIBLE);
+
+		if (wl->fwlog_size != 0) {
+			finish_wait(&wl->fwlog_waitq, &wait);
+			break;
+		}
+
+		mutex_unlock(&wl->mutex);
+
+		schedule();
+		finish_wait(&wl->fwlog_waitq, &wait);
+
+		if (signal_pending(current))
+			return -ERESTARTSYS;
+
+		ret = mutex_lock_interruptible(&wl->mutex);
+		if (ret < 0)
+			return -ERESTARTSYS;
+	}
+
+	/* Check if the fwlog is still valid */
+	if (wl->fwlog_size < 0) {
+		mutex_unlock(&wl->mutex);
+		return 0;
+	}
+
+	/* Seeking is not supported - old logs are not kept. Disregard pos. */
+	len = min(count, (size_t)wl->fwlog_size);
+	wl->fwlog_size -= len;
+	memcpy(buffer, wl->fwlog, len);
+
+	/* Make room for new messages */
+	memmove(wl->fwlog, wl->fwlog + len, wl->fwlog_size);
+
+	mutex_unlock(&wl->mutex);
+
+	return len;
+}
+
+static struct bin_attribute fwlog_attr = {
+	.attr = {.name = "fwlog", .mode = S_IRUSR},
+	.read = wl1271_sysfs_read_fwlog,
+};
+
+int wlcore_sysfs_init(struct wl1271 *wl)
+{
+	int ret;
+
+	/* Create sysfs file to control bt coex state */
+	ret = device_create_file(wl->dev, &dev_attr_bt_coex_state);
+	if (ret < 0) {
+		wl1271_error("failed to create sysfs file bt_coex_state");
+		goto out;
+	}
+
+	/* Create sysfs file to get HW PG version */
+	ret = device_create_file(wl->dev, &dev_attr_hw_pg_ver);
+	if (ret < 0) {
+		wl1271_error("failed to create sysfs file hw_pg_ver");
+		goto out_bt_coex_state;
+	}
+
+	/* Create sysfs file for the FW log */
+	ret = device_create_bin_file(wl->dev, &fwlog_attr);
+	if (ret < 0) {
+		wl1271_error("failed to create sysfs file fwlog");
+		goto out_hw_pg_ver;
+	}
+
+	goto out;
+
+out_hw_pg_ver:
+	device_remove_file(wl->dev, &dev_attr_hw_pg_ver);
+
+out_bt_coex_state:
+	device_remove_file(wl->dev, &dev_attr_bt_coex_state);
+
+out:
+	return ret;
+}
+
+void wlcore_sysfs_free(struct wl1271 *wl)
+{
+	device_remove_bin_file(wl->dev, &fwlog_attr);
+
+	device_remove_file(wl->dev, &dev_attr_hw_pg_ver);
+
+	device_remove_file(wl->dev, &dev_attr_bt_coex_state);
+}
diff --git a/drivers/net/wireless/ti/wlcore/sysfs.h b/drivers/net/wireless/ti/wlcore/sysfs.h
new file mode 100644
index 000000000000..c1488921839d
--- /dev/null
+++ b/drivers/net/wireless/ti/wlcore/sysfs.h
@@ -0,0 +1,28 @@
+/*
+ * This file is part of wlcore
+ *
+ * Copyright (C) 2013 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SYSFS_H__
+#define __SYSFS_H__
+
+int wlcore_sysfs_init(struct wl1271 *wl);
+void wlcore_sysfs_free(struct wl1271 *wl);
+
+#endif
-- 
cgit v1.2.3


From 6f0b1bb2ba2b1df781c64fff645c3fe0495b8161 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 7 May 2013 15:41:08 +0300
Subject: wlcore: configure rates in multiple cases

The current code configures the peer caps only on BSS_CHANGED_HT
notification. However, we have to configure the peer caps
(and rates) even when HT is not enabled. Otherwise, the fw
continues working with low rates.

Configure the peer caps when sta_exists is true (i.e. when
we extracted the sta rates, e.g. on association).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 600ed7bc38db..04dc1b6ae35b 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -4215,8 +4215,7 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
 	}
 
 	/* Handle new association with HT. Do this after join. */
-	if (sta_exists &&
-	    (changed & BSS_CHANGED_HT)) {
+	if (sta_exists) {
 		bool enabled =
 			bss_conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT;
 
-- 
cgit v1.2.3


From bc2ab3b850a8c563b3910f396e5f0753ce855134 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Wed, 8 May 2013 12:54:56 +0300
Subject: wl18xx: use locally administered MAC address if not available from
 fuse

In some R&D chips, the device may be left untrimmed and with the MAC
address missing from fuse ROM.  In order to support those devices,
apply a random locally administered MAC address instead.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl18xx/main.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index ae85ae46c61b..7aa0eb848c5a 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/ip.h>
 #include <linux/firmware.h>
+#include <linux/etherdevice.h>
 
 #include "../wlcore/wlcore.h"
 #include "../wlcore/debug.h"
@@ -1318,6 +1319,16 @@ static int wl18xx_get_mac(struct wl1271 *wl)
 		((mac1 & 0xff000000) >> 24);
 	wl->fuse_nic_addr = (mac1 & 0xffffff);
 
+	if (!wl->fuse_oui_addr && !wl->fuse_nic_addr) {
+		u8 mac[ETH_ALEN];
+
+		eth_random_addr(mac);
+
+		wl->fuse_oui_addr = (mac[0] << 16) + (mac[1] << 8) + mac[2];
+		wl->fuse_nic_addr = (mac[3] << 16) + (mac[4] << 8) + mac[5];
+		wl1271_warning("MAC address from fuse not available, using random locally administered addresses.");
+	}
+
 	ret = wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
 
 out:
-- 
cgit v1.2.3


From ba1e6eb96d73eb1b2be6d67a55a799477b14a353 Mon Sep 17 00:00:00 2001
From: Yoni Divinsky <yoni.divinsky@ti.com>
Date: Sun, 12 May 2013 12:35:28 +0300
Subject: wlcore: set default_wep_key when configured

When associating to an AP with WEP set the
default key upon association by implementing
the set_deafult_key_idx op.

Fixes auto-arp sent with wrong key_idx bug.

Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com>
Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 49 +++++++++++++++++++++++++++++------
 drivers/net/wireless/ti/wlcore/tx.c   |  2 +-
 2 files changed, 42 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 04dc1b6ae35b..7ee422f97c10 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -3196,14 +3196,6 @@ static int wl1271_set_key(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 		if (ret < 0)
 			return ret;
 
-		/* the default WEP key needs to be configured at least once */
-		if (key_type == KEY_WEP) {
-			ret = wl12xx_cmd_set_default_wep_key(wl,
-							wlvif->default_key,
-							wlvif->sta.hlid);
-			if (ret < 0)
-				return ret;
-		}
 	}
 
 	return 0;
@@ -3360,6 +3352,46 @@ int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd,
 }
 EXPORT_SYMBOL_GPL(wlcore_set_key);
 
+static void wl1271_op_set_default_key_idx(struct ieee80211_hw *hw,
+					  struct ieee80211_vif *vif,
+					  int key_idx)
+{
+	struct wl1271 *wl = hw->priv;
+	struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
+	int ret;
+
+	wl1271_debug(DEBUG_MAC80211, "mac80211 set default key idx %d",
+		     key_idx);
+
+	mutex_lock(&wl->mutex);
+
+	if (unlikely(wl->state != WLCORE_STATE_ON)) {
+		ret = -EAGAIN;
+		goto out_unlock;
+	}
+
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out_unlock;
+
+	wlvif->default_key = key_idx;
+
+	/* the default WEP key needs to be configured at least once */
+	if (wlvif->encryption_type == KEY_WEP) {
+		ret = wl12xx_cmd_set_default_wep_key(wl,
+				key_idx,
+				wlvif->sta.hlid);
+		if (ret < 0)
+			goto out_sleep;
+	}
+
+out_sleep:
+	wl1271_ps_elp_sleep(wl);
+
+out_unlock:
+	mutex_unlock(&wl->mutex);
+}
+
 void wlcore_regdomain_config(struct wl1271 *wl)
 {
 	int ret;
@@ -5352,6 +5384,7 @@ static const struct ieee80211_ops wl1271_ops = {
 	.ampdu_action = wl1271_op_ampdu_action,
 	.tx_frames_pending = wl1271_tx_frames_pending,
 	.set_bitrate_mask = wl12xx_set_bitrate_mask,
+	.set_default_unicast_key = wl1271_op_set_default_key_idx,
 	.channel_switch = wl12xx_op_channel_switch,
 	.flush = wlcore_op_flush,
 	.remain_on_channel = wlcore_op_remain_on_channel,
diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index 004d02e71f01..7e93fe63a2c7 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -386,7 +386,7 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 		is_wep = (cipher == WLAN_CIPHER_SUITE_WEP40) ||
 			 (cipher == WLAN_CIPHER_SUITE_WEP104);
 
-		if (unlikely(is_wep && wlvif->default_key != idx)) {
+		if (WARN_ON(is_wep && wlvif->default_key != idx)) {
 			ret = wl1271_set_default_wep_key(wl, wlvif, idx);
 			if (ret < 0)
 				return ret;
-- 
cgit v1.2.3


From c838478b7b78d6e212547cd2243031080f2cee45 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Sun, 12 May 2013 12:35:29 +0300
Subject: wlcore: cancel channel switch work on interface removal

Otherwise, if the work is pending, we might get
a bad dereference after the interface is removed.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 7ee422f97c10..ed200c61b231 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2589,6 +2589,7 @@ unlock:
 	cancel_work_sync(&wlvif->rx_streaming_enable_work);
 	cancel_work_sync(&wlvif->rx_streaming_disable_work);
 	cancel_delayed_work_sync(&wlvif->connection_loss_work);
+	cancel_delayed_work_sync(&wlvif->channel_switch_work);
 
 	mutex_lock(&wl->mutex);
 }
-- 
cgit v1.2.3


From 2baf53c6e35ea25aaa21486dab023eb3d901611e Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Sun, 12 May 2013 12:35:30 +0300
Subject: wlcore: hold jiffies in unsigned long

u32 can be incorrect (too small) for some architectures.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/ps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ti/wlcore/ps.c b/drivers/net/wireless/ti/wlcore/ps.c
index 9654577efd01..98066d40c2ad 100644
--- a/drivers/net/wireless/ti/wlcore/ps.c
+++ b/drivers/net/wireless/ti/wlcore/ps.c
@@ -110,7 +110,7 @@ int wl1271_ps_elp_wakeup(struct wl1271 *wl)
 	DECLARE_COMPLETION_ONSTACK(compl);
 	unsigned long flags;
 	int ret;
-	u32 start_time = jiffies;
+	unsigned long start_time = jiffies;
 	bool pending = false;
 
 	/*
-- 
cgit v1.2.3


From 5cbba2d48ac3d493d2337414806c718370edcf8a Mon Sep 17 00:00:00 2001
From: Victor Goldenshtein <victorg@ti.com>
Date: Sun, 12 May 2013 12:35:31 +0300
Subject: wlcore: fix occasional AP TX stop after recovery

The fw_status wasn't zeroed during allocation, resulting
in uninitialized var usage, and finally causing AP
traffic stop after recovery.

The wrong value in fw_status_2->counters.tx_lnk_free_pkts
led to a bad lnk->allocated_pkts calculation in
wlcore_fw_status(), causing wl18xx_lnk_low_prio() to return
FALSE (lnk->allocated_pkts > thold).
This eventually blocked the link in wlcore_tx_work_locked(),
as wl1271_skb_dequeue() continuously returned NULL.

Fix it by zeroing wl->fw_status_1/2 during allocation.

Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index ed200c61b231..b8db55c868c7 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -970,7 +970,7 @@ static int wlcore_fw_wakeup(struct wl1271 *wl)
 
 static int wl1271_setup(struct wl1271 *wl)
 {
-	wl->fw_status_1 = kmalloc(WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc) +
+	wl->fw_status_1 = kzalloc(WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc) +
 				  sizeof(*wl->fw_status_2) +
 				  wl->fw_status_priv_len, GFP_KERNEL);
 	if (!wl->fw_status_1)
@@ -980,7 +980,7 @@ static int wl1271_setup(struct wl1271 *wl)
 				(((u8 *) wl->fw_status_1) +
 				WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc));
 
-	wl->tx_res_if = kmalloc(sizeof(*wl->tx_res_if), GFP_KERNEL);
+	wl->tx_res_if = kzalloc(sizeof(*wl->tx_res_if), GFP_KERNEL);
 	if (!wl->tx_res_if) {
 		kfree(wl->fw_status_1);
 		return -ENOMEM;
-- 
cgit v1.2.3


From d5a49178fa842a83d7161b373117004e0483385a Mon Sep 17 00:00:00 2001
From: Peter Huewe <peterhuewe@gmx.de>
Date: Mon, 20 May 2013 21:52:40 +0200
Subject: net/wireless/ti/wlcore/spi: Use module_spi_driver to register driver

Removing some boilerplate by using module_spi_driver instead of calling
register and unregister in the otherwise empty init/exit functions

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/spi.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index e26447832683..1b0cd98e35f1 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -434,19 +434,7 @@ static struct spi_driver wl1271_spi_driver = {
 	.remove		= wl1271_remove,
 };
 
-static int __init wl1271_init(void)
-{
-	return spi_register_driver(&wl1271_spi_driver);
-}
-
-static void __exit wl1271_exit(void)
-{
-	spi_unregister_driver(&wl1271_spi_driver);
-}
-
-module_init(wl1271_init);
-module_exit(wl1271_exit);
-
+module_spi_driver(wl1271_spi_driver);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
-- 
cgit v1.2.3


From 19a4e68a8a192957f7556a0aae9c37a6bc73cde6 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Wed, 29 May 2013 15:48:22 +0530
Subject: net: wireless: wl1251: Use module_spi_driver macro

module_spi_driver() eliminates some boiler plate and makes code
simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl1251/spi.c | 24 +-----------------------
 1 file changed, 1 insertion(+), 23 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 4c67c2f9ea71..dfd087742d1a 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -329,29 +329,7 @@ static struct spi_driver wl1251_spi_driver = {
 	.remove		= wl1251_spi_remove,
 };
 
-static int __init wl1251_spi_init(void)
-{
-	int ret;
-
-	ret = spi_register_driver(&wl1251_spi_driver);
-	if (ret < 0) {
-		wl1251_error("failed to register spi driver: %d", ret);
-		goto out;
-	}
-
-out:
-	return ret;
-}
-
-static void __exit wl1251_spi_exit(void)
-{
-	spi_unregister_driver(&wl1251_spi_driver);
-
-	wl1251_notice("unloaded");
-}
-
-module_init(wl1251_spi_init);
-module_exit(wl1251_spi_exit);
+module_spi_driver(wl1251_spi_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>");
-- 
cgit v1.2.3


From 789e90e567d7d93edc1b2001d17209c21cc37850 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Wed, 29 May 2013 15:48:23 +0530
Subject: net: wireless: wl1251: Fix commenting style

Make the commenting style consistent with networking block comment
style as suggested by checkpatch.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl1251/spi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index dfd087742d1a..c7dc6feab2ff 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -93,8 +93,7 @@ static void wl1251_spi_wake(struct wl1251 *wl)
 	memset(&t, 0, sizeof(t));
 	spi_message_init(&m);
 
-	/*
-	 * Set WSPI_INIT_COMMAND
+	/* Set WSPI_INIT_COMMAND
 	 * the data is being send from the MSB to LSB
 	 */
 	cmd[2] = 0xff;
@@ -262,7 +261,8 @@ static int wl1251_spi_probe(struct spi_device *spi)
 	wl->if_ops = &wl1251_spi_ops;
 
 	/* This is the only SPI value that we need to set here, the rest
-	 * comes from the board-peripherals file */
+	 * comes from the board-peripherals file
+	 */
 	spi->bits_per_word = 32;
 
 	ret = spi_setup(spi);
-- 
cgit v1.2.3


From 3c68ef5b2223e084402a4fedbd4c31774f012f4f Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Mon, 10 Jun 2013 15:40:07 -0700
Subject: mwifiex: Add module parameter for regdomain

Allow a regulatory domain country code to be specified at boot
using a module argument.  This overrides the firmware regulatory
mode.

This patch also enables uAP to operate in 11a mode with hostapd.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 29 +++++++++++++++++++++++++----
 1 file changed, 25 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 856aea25052b..ef5fa890a286 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -20,6 +20,9 @@
 #include "cfg80211.h"
 #include "main.h"
 
+static char *reg_alpha2;
+module_param(reg_alpha2, charp, 0);
+
 static const struct ieee80211_iface_limit mwifiex_ap_sta_limits[] = {
 	{
 		.max = 2, .types = BIT(NL80211_IFTYPE_STATION),
@@ -2485,6 +2488,17 @@ static const struct wiphy_wowlan_support mwifiex_wowlan_support = {
 };
 #endif
 
+static bool mwifiex_is_valid_alpha2(const char *alpha2)
+{
+	if (!alpha2 || strlen(alpha2) != 2)
+		return false;
+
+	if (isalpha(alpha2[0]) && isalpha(alpha2[1]))
+		return true;
+
+	return false;
+}
+
 /*
  * This function registers the device with CFG802.11 subsystem.
  *
@@ -2537,6 +2551,7 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
 			WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD |
 			WIPHY_FLAG_AP_UAPSD |
 			WIPHY_FLAG_CUSTOM_REGULATORY |
+			WIPHY_FLAG_STRICT_REGULATORY |
 			WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
 
 	wiphy_apply_custom_regulatory(wiphy, &mwifiex_world_regdom_custom);
@@ -2574,10 +2589,16 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
 		wiphy_free(wiphy);
 		return ret;
 	}
-	country_code = mwifiex_11d_code_2_region(priv->adapter->region_code);
-	if (country_code)
-		dev_info(adapter->dev,
-			 "ignoring F/W country code %2.2s\n", country_code);
+
+	if (reg_alpha2 && mwifiex_is_valid_alpha2(reg_alpha2)) {
+		wiphy_info(wiphy, "driver hint alpha2: %2.2s\n", reg_alpha2);
+		regulatory_hint(wiphy, reg_alpha2);
+	} else {
+		country_code = mwifiex_11d_code_2_region(adapter->region_code);
+		if (country_code)
+			wiphy_info(wiphy, "ignoring F/W country code %2.2s\n",
+				   country_code);
+	}
 
 	adapter->wiphy = wiphy;
 	return ret;
-- 
cgit v1.2.3


From 6390d88529835a8ad3563fe01a5da89fa52d6db2 Mon Sep 17 00:00:00 2001
From: Daniel Drake <dsd@laptop.org>
Date: Fri, 14 Jun 2013 15:24:24 -0400
Subject: mwifiex: fix memory corruption when unsetting multicast list

When trying to unset a previously-set multicast list (i.e. the new list
has 0 entries), mwifiex_set_multicast_list() was calling down to
mwifiex_request_set_multicast_list() while leaving
mcast_list.num_multicast_addr as an uninitialized value.

We were arriving at mwifiex_cmd_mac_multicast_adr() which would then
proceed to do an often huge memcpy of
mcast_list.num_multicast_addr*ETH_ALEN bytes, causing memory corruption
and hard to debug crashes.

Fix this by setting mcast_list.num_multicast_addr to 0 when no multicast
list is provided. Similarly, fix up the logic in
mwifiex_request_set_multicast_list() to unset the multicast list that
was previously sent to the hardware in such cases.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/main.c      |  5 ++---
 drivers/net/wireless/mwifiex/sta_ioctl.c | 18 ++++++++----------
 2 files changed, 10 insertions(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 485871940d3c..e15ab72fb03d 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -669,9 +669,8 @@ static void mwifiex_set_multicast_list(struct net_device *dev)
 		mcast_list.mode = MWIFIEX_ALL_MULTI_MODE;
 	} else {
 		mcast_list.mode = MWIFIEX_MULTICAST_MODE;
-		if (netdev_mc_count(dev))
-			mcast_list.num_multicast_addr =
-				mwifiex_copy_mcast_addr(&mcast_list, dev);
+		mcast_list.num_multicast_addr =
+			mwifiex_copy_mcast_addr(&mcast_list, dev);
 	}
 	mwifiex_request_set_multicast_list(priv, &mcast_list);
 }
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 1a8a19dbd635..23aa910bc5d0 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -104,16 +104,14 @@ int mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
 		} else {
 			priv->curr_pkt_filter &=
 				~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
-			if (mcast_list->num_multicast_addr) {
-				dev_dbg(priv->adapter->dev,
-					"info: Set multicast list=%d\n",
-				       mcast_list->num_multicast_addr);
-				/* Send multicast addresses to firmware */
-				ret = mwifiex_send_cmd_async(priv,
-					HostCmd_CMD_MAC_MULTICAST_ADR,
-					HostCmd_ACT_GEN_SET, 0,
-					mcast_list);
-			}
+			dev_dbg(priv->adapter->dev,
+				"info: Set multicast list=%d\n",
+				mcast_list->num_multicast_addr);
+			/* Send multicast addresses to firmware */
+			ret = mwifiex_send_cmd_async(priv,
+				HostCmd_CMD_MAC_MULTICAST_ADR,
+				HostCmd_ACT_GEN_SET, 0,
+				mcast_list);
 		}
 	}
 	dev_dbg(priv->adapter->dev,
-- 
cgit v1.2.3


From bac76a3d07133f6d9389689f3693b78f68b77adb Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 17 Jun 2013 07:01:47 +0530
Subject: ath9k: Fix LNA gpio for AR9485

The commit "ath9k: Add custom parameters for CUS198" didn't
pass the correct gpio value to ath9k_hw_cfg_output(). Fix it.

Reported-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 9a00bc0a9304..eae23b910bce 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3576,7 +3576,7 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
 		else
 			gpio = AR9300_EXT_LNA_CTL_GPIO_AR9485;
 
-		ath9k_hw_cfg_output(ah, AR9300_EXT_LNA_CTL_GPIO_AR9485,
+		ath9k_hw_cfg_output(ah, gpio,
 				    AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED);
 	}
 
-- 
cgit v1.2.3


From 55fee98a6e732bea9f2da986b458e68ea462c584 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 17 Jun 2013 14:24:36 +0530
Subject: ath9k: Fix ANI for AP mode

The commit "ath9k: Fix ANI monitoring" reverted an earlier
commit that adjusted ANI to improve performance. But, this causes
adverse effects in AP mode (as reported by Felix based on an OpenWrt
report). Use the older INI/period configuration for now until more
testing is done.

Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 29 ++++++++++++-----------------
 drivers/net/wireless/ath/ath9k/ani.h |  6 +++++-
 2 files changed, 17 insertions(+), 18 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index a68beb19ce4d..4994bea809eb 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -186,6 +186,14 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel,
 				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
 				     entry_ofdm->ofdm_weak_signal_on);
 	}
+
+	if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) {
+		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
+		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI;
+	} else {
+		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI;
+		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
+	}
 }
 
 static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
@@ -420,25 +428,12 @@ void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan)
 		ofdmPhyErrRate, aniState->cckNoiseImmunityLevel,
 		cckPhyErrRate, aniState->ofdmsTurn);
 
-	if (aniState->listenTime > 5 * ah->aniperiod) {
-		/*
-		 * Check if we need to lower immunity if
-		 * 5 ani_periods have passed.
-		 */
-		if (ofdmPhyErrRate <= ah->config.ofdm_trig_low &&
-		    cckPhyErrRate <= ah->config.cck_trig_low) {
+	if (aniState->listenTime > ah->aniperiod) {
+		if (cckPhyErrRate < ah->config.cck_trig_low &&
+		    ofdmPhyErrRate < ah->config.ofdm_trig_low) {
 			ath9k_hw_ani_lower_immunity(ah);
 			aniState->ofdmsTurn = !aniState->ofdmsTurn;
-		}
-		ath9k_ani_restart(ah);
-	} else if (aniState->listenTime > ah->aniperiod) {
-		/*
-		 * Check if immunity has to be raised,
-		 * (either OFDM or CCK).
-		 */
-		if (ofdmPhyErrRate > ah->config.ofdm_trig_high &&
-		    (cckPhyErrRate <= ah->config.cck_trig_high ||
-		     aniState->ofdmsTurn)) {
+		} else if (ofdmPhyErrRate > ah->config.ofdm_trig_high) {
 			ath9k_hw_ani_ofdm_err_trigger(ah);
 			aniState->ofdmsTurn = false;
 		} else if (cckPhyErrRate > ah->config.cck_trig_high) {
diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index 77a06fd40287..b54a3fb01883 100644
--- a/drivers/net/wireless/ath/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
@@ -20,8 +20,12 @@
 #define BEACON_RSSI(ahp) (ahp->stats.avgbrssi)
 
 /* units are errors per second */
-#define ATH9K_ANI_OFDM_TRIG_HIGH          1000
+#define ATH9K_ANI_OFDM_TRIG_HIGH           3500
+#define ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI 1000
+
 #define ATH9K_ANI_OFDM_TRIG_LOW           400
+#define ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI 900
+
 #define ATH9K_ANI_CCK_TRIG_HIGH           600
 #define ATH9K_ANI_CCK_TRIG_LOW            300
 
-- 
cgit v1.2.3


From 972da7ec493b16b1d06c27832fad971466859fad Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 17 Jun 2013 18:34:32 +0200
Subject: bcma: update core (en|dis)abling functions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Broadocm updated their code, this may be needed for newer hardware or
some corner cases.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/bcma/core.c | 28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c
index 17b26ce7e051..37a5ffe673d5 100644
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
@@ -9,6 +9,25 @@
 #include <linux/export.h>
 #include <linux/bcma/bcma.h>
 
+static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask,
+				 u32 value, int timeout)
+{
+	unsigned long deadline = jiffies + timeout;
+	u32 val;
+
+	do {
+		val = bcma_aread32(core, reg);
+		if ((val & mask) == value)
+			return true;
+		cpu_relax();
+		udelay(10);
+	} while (!time_after_eq(jiffies, deadline));
+
+	bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
+
+	return false;
+}
+
 bool bcma_core_is_enabled(struct bcma_device *core)
 {
 	if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
@@ -25,13 +44,15 @@ void bcma_core_disable(struct bcma_device *core, u32 flags)
 	if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
 		return;
 
-	bcma_awrite32(core, BCMA_IOCTL, flags);
-	bcma_aread32(core, BCMA_IOCTL);
-	udelay(10);
+	bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300);
 
 	bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
 	bcma_aread32(core, BCMA_RESET_CTL);
 	udelay(1);
+
+	bcma_awrite32(core, BCMA_IOCTL, flags);
+	bcma_aread32(core, BCMA_IOCTL);
+	udelay(10);
 }
 EXPORT_SYMBOL_GPL(bcma_core_disable);
 
@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device *core, u32 flags)
 	bcma_aread32(core, BCMA_IOCTL);
 
 	bcma_awrite32(core, BCMA_RESET_CTL, 0);
+	bcma_aread32(core, BCMA_RESET_CTL);
 	udelay(1);
 
 	bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
-- 
cgit v1.2.3


From 39cd206c81f1cc6cc4d3cbafa81734cd3b3c66be Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 17 Jun 2013 19:19:19 +0200
Subject: ssb: use const for serial flash hardware table
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/ssb/driver_chipcommon_sflash.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ssb/driver_chipcommon_sflash.c b/drivers/ssb/driver_chipcommon_sflash.c
index 720665ca2bb1..1b9e770f5328 100644
--- a/drivers/ssb/driver_chipcommon_sflash.c
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -16,7 +16,7 @@ struct ssb_sflash_tbl_e {
 	u16 numblocks;
 };
 
-static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
+static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
 	{ "M25P20", 0x11, 0x10000, 4, },
 	{ "M25P40", 0x12, 0x10000, 8, },
 
@@ -27,7 +27,7 @@ static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
 	{ 0 },
 };
 
-static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
+static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
 	{ "SST25WF512", 1, 0x1000, 16, },
 	{ "SST25VF512", 0x48, 0x1000, 16, },
 	{ "SST25WF010", 2, 0x1000, 32, },
@@ -45,7 +45,7 @@ static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
 	{ 0 },
 };
 
-static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
+static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
 	{ "AT45DB011", 0xc, 256, 512, },
 	{ "AT45DB021", 0x14, 256, 1024, },
 	{ "AT45DB041", 0x1c, 256, 2048, },
@@ -73,7 +73,7 @@ static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
 /* Initialize serial flash access */
 int ssb_sflash_init(struct ssb_chipcommon *cc)
 {
-	struct ssb_sflash_tbl_e *e;
+	const struct ssb_sflash_tbl_e *e;
 	u32 id, id2;
 
 	switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-- 
cgit v1.2.3


From 4a71053ec5b5f5bf58963b94429d7af920b88ef9 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 17 Jun 2013 19:19:20 +0200
Subject: bcma: use const for serial flash hardware table
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/bcma/driver_chipcommon_sflash.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/bcma/driver_chipcommon_sflash.c b/drivers/bcma/driver_chipcommon_sflash.c
index e6ed4fe5dced..4d07cce9c5d9 100644
--- a/drivers/bcma/driver_chipcommon_sflash.c
+++ b/drivers/bcma/driver_chipcommon_sflash.c
@@ -30,7 +30,7 @@ struct bcma_sflash_tbl_e {
 	u16 numblocks;
 };
 
-static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
 	{ "M25P20", 0x11, 0x10000, 4, },
 	{ "M25P40", 0x12, 0x10000, 8, },
 
@@ -41,7 +41,7 @@ static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
 	{ 0 },
 };
 
-static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
 	{ "SST25WF512", 1, 0x1000, 16, },
 	{ "SST25VF512", 0x48, 0x1000, 16, },
 	{ "SST25WF010", 2, 0x1000, 32, },
@@ -59,7 +59,7 @@ static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
 	{ 0 },
 };
 
-static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
 	{ "AT45DB011", 0xc, 256, 512, },
 	{ "AT45DB021", 0x14, 256, 1024, },
 	{ "AT45DB041", 0x1c, 256, 2048, },
@@ -89,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
 	struct bcma_sflash *sflash = &cc->sflash;
-	struct bcma_sflash_tbl_e *e;
+	const struct bcma_sflash_tbl_e *e;
 	u32 id, id2;
 
 	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
-- 
cgit v1.2.3


From e570bd0472b10c9f982fdb58eb39c81445cddb5c Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 17 Jun 2013 19:56:20 +0200
Subject: ssb: add struct for serial flash
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This data allow writing for example MTD driver.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/ssb/driver_chipcommon_sflash.c |  7 +++++++
 include/linux/ssb/ssb_driver_mips.h    | 15 +++++++++++++++
 2 files changed, 22 insertions(+)

(limited to 'drivers')

diff --git a/drivers/ssb/driver_chipcommon_sflash.c b/drivers/ssb/driver_chipcommon_sflash.c
index 1b9e770f5328..205f1c499c46 100644
--- a/drivers/ssb/driver_chipcommon_sflash.c
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -73,6 +73,7 @@ static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
 /* Initialize serial flash access */
 int ssb_sflash_init(struct ssb_chipcommon *cc)
 {
+	struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
 	const struct ssb_sflash_tbl_e *e;
 	u32 id, id2;
 
@@ -131,6 +132,12 @@ int ssb_sflash_init(struct ssb_chipcommon *cc)
 		return -ENOTSUPP;
 	}
 
+	sflash->window = SSB_FLASH2;
+	sflash->blocksize = e->blocksize;
+	sflash->numblocks = e->numblocks;
+	sflash->size = sflash->blocksize * sflash->numblocks;
+	sflash->present = true;
+
 	pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
 		e->name, e->blocksize, e->numblocks);
 
diff --git a/include/linux/ssb/ssb_driver_mips.h b/include/linux/ssb/ssb_driver_mips.h
index afe79d40a99e..6535e4718fde 100644
--- a/include/linux/ssb/ssb_driver_mips.h
+++ b/include/linux/ssb/ssb_driver_mips.h
@@ -20,6 +20,18 @@ struct ssb_pflash {
 	u32 window_size;
 };
 
+#ifdef CONFIG_SSB_SFLASH
+struct ssb_sflash {
+	bool present;
+	u32 window;
+	u32 blocksize;
+	u16 numblocks;
+	u32 size;
+
+	void *priv;
+};
+#endif
+
 struct ssb_mipscore {
 	struct ssb_device *dev;
 
@@ -27,6 +39,9 @@ struct ssb_mipscore {
 	struct ssb_serial_port serial_ports[4];
 
 	struct ssb_pflash pflash;
+#ifdef CONFIG_SSB_SFLASH
+	struct ssb_sflash sflash;
+#endif
 };
 
 extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
-- 
cgit v1.2.3


From c4d827c5ccc3a49227dbf9d4b248a2e86f388023 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Mon, 17 Jun 2013 13:25:49 -0500
Subject: rtlwifi: rtl8192cu: Add new USB ID for TP-Link TL-WN8200ND

This is a new device for this driver.

Reported-by: Tobias Kluge <zielscheibe@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Tobias Kluge <zielscheibe@gmail.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 826f085c29dd..2bd598526217 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -359,6 +359,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
 	{RTL_USB_DEVICE(0x2001, 0x330a, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
 	{RTL_USB_DEVICE(0x2019, 0xab2b, rtl92cu_hal_cfg)}, /*Planex -Abocom*/
 	{RTL_USB_DEVICE(0x20f4, 0x624d, rtl92cu_hal_cfg)}, /*TRENDNet*/
+	{RTL_USB_DEVICE(0x2357, 0x0100, rtl92cu_hal_cfg)}, /*TP-Link WN8200ND*/
 	{RTL_USB_DEVICE(0x7392, 0x7822, rtl92cu_hal_cfg)}, /*Edimax -Edimax*/
 	{}
 };
-- 
cgit v1.2.3


From 143353104983f5af2c6087203b83312e58f3dc86 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 18 Jun 2013 10:13:39 +0530
Subject: ath9k: Merge HWTIMER debug level with BTCOEX

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath.h      | 13 ++++++-------
 drivers/net/wireless/ath/ath9k/hw.c |  6 +++---
 2 files changed, 9 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index 4521342c62cc..daeafeff186b 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -239,13 +239,12 @@ enum ATH_DEBUG {
 	ATH_DBG_CONFIG		= 0x00000200,
 	ATH_DBG_FATAL		= 0x00000400,
 	ATH_DBG_PS		= 0x00000800,
-	ATH_DBG_HWTIMER		= 0x00001000,
-	ATH_DBG_BTCOEX		= 0x00002000,
-	ATH_DBG_WMI		= 0x00004000,
-	ATH_DBG_BSTUCK		= 0x00008000,
-	ATH_DBG_MCI		= 0x00010000,
-	ATH_DBG_DFS		= 0x00020000,
-	ATH_DBG_WOW		= 0x00040000,
+	ATH_DBG_BTCOEX		= 0x00001000,
+	ATH_DBG_WMI		= 0x00002000,
+	ATH_DBG_BSTUCK		= 0x00004000,
+	ATH_DBG_MCI		= 0x00008000,
+	ATH_DBG_DFS		= 0x00010000,
+	ATH_DBG_WOW		= 0x00020000,
 	ATH_DBG_ANY		= 0xffffffff
 };
 
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index ca9d9cd14ddb..5324c3346af8 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -3042,7 +3042,7 @@ void ath9k_hw_gen_timer_start(struct ath_hw *ah,
 
 	timer_next = tsf + trig_timeout;
 
-	ath_dbg(ath9k_hw_common(ah), HWTIMER,
+	ath_dbg(ath9k_hw_common(ah), BTCOEX,
 		"current tsf %x period %x timer_next %x\n",
 		tsf, timer_period, timer_next);
 
@@ -3141,7 +3141,7 @@ void ath_gen_timer_isr(struct ath_hw *ah)
 		index = rightmost_index(timer_table, &thresh_mask);
 		timer = timer_table->timers[index];
 		BUG_ON(!timer);
-		ath_dbg(common, HWTIMER, "TSF overflow for Gen timer %d\n",
+		ath_dbg(common, BTCOEX, "TSF overflow for Gen timer %d\n",
 			index);
 		timer->overflow(timer->arg);
 	}
@@ -3150,7 +3150,7 @@ void ath_gen_timer_isr(struct ath_hw *ah)
 		index = rightmost_index(timer_table, &trigger_mask);
 		timer = timer_table->timers[index];
 		BUG_ON(!timer);
-		ath_dbg(common, HWTIMER,
+		ath_dbg(common, BTCOEX,
 			"Gen timer[%d] trigger\n", index);
 		timer->trigger(timer->arg);
 	}
-- 
cgit v1.2.3


From df401907b8cb2f6868ecbe82eaf029c3c9097674 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 18 Jun 2013 10:13:40 +0530
Subject: ath9k: Convert a couple of debug messages

Use the REGULATORY debug level to print the target power
details. EEPROM can be used for other purposes and this
spams the log.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index eae23b910bce..1e86977d3322 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -4562,7 +4562,7 @@ static void ar9003_hw_get_target_power_eeprom(struct ath_hw *ah,
 						 is2GHz);
 
 	for (i = 0; i < ar9300RateSize; i++) {
-		ath_dbg(common, EEPROM, "TPC[%02d] 0x%08x\n",
+		ath_dbg(common, REGULATORY, "TPC[%02d] 0x%08x\n",
 			i, targetPowerValT2[i]);
 	}
 }
@@ -5288,7 +5288,7 @@ static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah,
 		return;
 
 	for (i = 0; i < ar9300RateSize; i++) {
-		ath_dbg(common, EEPROM, "TPC[%02d] 0x%08x\n",
+		ath_dbg(common, REGULATORY, "TPC[%02d] 0x%08x\n",
 			i, targetPowerValT2[i]);
 	}
 
-- 
cgit v1.2.3


From 745a84e5c0675e41d38d93936ea5328da6bcc50c Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 18 Jun 2013 10:13:41 +0530
Subject: ath9k: Update AR9462 2.0 initvals

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
index 999ab08c34e6..f00e9451a623 100644
--- a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
@@ -78,7 +78,7 @@ static const u32 ar9462_2p0_baseband_postamble[][5] = {
 	{0x0000a284, 0x00000000, 0x00000000, 0x00000150, 0x00000150},
 	{0x0000a288, 0x00000110, 0x00000110, 0x00000110, 0x00000110},
 	{0x0000a28c, 0x00022222, 0x00022222, 0x00022222, 0x00022222},
-	{0x0000a2c4, 0x00058d18, 0x00058d18, 0x00058d18, 0x00058d18},
+	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
 	{0x0000a2d0, 0x00041981, 0x00041981, 0x00041981, 0x00041982},
 	{0x0000a2d8, 0x7999a83b, 0x7999a83b, 0x7999a83b, 0x7999a83b},
 	{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-- 
cgit v1.2.3


From 51dbd0a897a995b44c2db04e29f224ae8fb8559b Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 18 Jun 2013 10:13:42 +0530
Subject: ath9k: Add support for 5G-XLNA/AR9462

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_hw.c         |  18 +-
 drivers/net/wireless/ath/ath9k/ar9003_phy.c        |  27 +++
 .../net/wireless/ath/ath9k/ar9462_2p0_initvals.h   | 265 +++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/hw.h                |   1 +
 4 files changed, 310 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index a3523c969a3a..ce748afd7f1a 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -627,9 +627,22 @@ static void ar9003_rx_gain_table_mode1(struct ath_hw *ah)
 
 static void ar9003_rx_gain_table_mode2(struct ath_hw *ah)
 {
-	if (AR_SREV_9462_20(ah))
+	if (AR_SREV_9462_20(ah)) {
 		INIT_INI_ARRAY(&ah->iniModesRxGain,
 			       ar9462_common_mixed_rx_gain_table_2p0);
+		INIT_INI_ARRAY(&ah->ini_modes_rxgain_5g_xlna,
+			       ar9462_2p0_baseband_postamble_5g_xlna);
+	}
+}
+
+static void ar9003_rx_gain_table_mode3(struct ath_hw *ah)
+{
+	if (AR_SREV_9462_20(ah)) {
+		INIT_INI_ARRAY(&ah->iniModesRxGain,
+			       ar9462_2p0_5g_xlna_only_rxgain);
+		INIT_INI_ARRAY(&ah->ini_modes_rxgain_5g_xlna,
+			       ar9462_2p0_baseband_postamble_5g_xlna);
+	}
 }
 
 static void ar9003_rx_gain_table_apply(struct ath_hw *ah)
@@ -645,6 +658,9 @@ static void ar9003_rx_gain_table_apply(struct ath_hw *ah)
 	case 2:
 		ar9003_rx_gain_table_mode2(ah);
 		break;
+	case 3:
+		ar9003_rx_gain_table_mode3(ah);
+		break;
 	}
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index bc483128efcd..df919e2b61d5 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -735,6 +735,9 @@ static int ar9003_hw_process_ini(struct ath_hw *ah,
 		return -EINVAL;
 	}
 
+	/*
+	 * SOC, MAC, BB, RADIO initvals.
+	 */
 	for (i = 0; i < ATH_INI_NUM_SPLIT; i++) {
 		ar9003_hw_prog_ini(ah, &ah->iniSOC[i], modesIndex);
 		ar9003_hw_prog_ini(ah, &ah->iniMac[i], modesIndex);
@@ -746,11 +749,29 @@ static int ar9003_hw_process_ini(struct ath_hw *ah,
 					   modesIndex);
 	}
 
+	/*
+	 * RXGAIN initvals.
+	 */
 	REG_WRITE_ARRAY(&ah->iniModesRxGain, 1, regWrites);
+
+	if (AR_SREV_9462_20(ah)) {
+		/*
+		 * 5G-XLNA
+		 */
+		if ((ar9003_hw_get_rx_gain_idx(ah) == 2) ||
+		    (ar9003_hw_get_rx_gain_idx(ah) == 3)) {
+			REG_WRITE_ARRAY(&ah->ini_modes_rxgain_5g_xlna,
+					modesIndex, regWrites);
+		}
+	}
+
 	if (AR_SREV_9550(ah))
 		REG_WRITE_ARRAY(&ah->ini_modes_rx_gain_bounds, modesIndex,
 				regWrites);
 
+	/*
+	 * TXGAIN initvals.
+	 */
 	if (AR_SREV_9550(ah)) {
 		int modes_txgain_index;
 
@@ -772,8 +793,14 @@ static int ar9003_hw_process_ini(struct ath_hw *ah,
 		REG_WRITE_ARRAY(&ah->iniModesFastClock,
 				modesIndex, regWrites);
 
+	/*
+	 * Clock frequency initvals.
+	 */
 	REG_WRITE_ARRAY(&ah->iniAdditional, 1, regWrites);
 
+	/*
+	 * JAPAN regulatory.
+	 */
 	if (chan->channel == 2484)
 		ar9003_hw_prog_ini(ah, &ah->iniCckfirJapan2484, 1);
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
index f00e9451a623..bcd0cae1048d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
@@ -1449,4 +1449,269 @@ static const u32 ar9462_common_mixed_rx_gain_table_2p0[][2] = {
 	{0x0000b1fc, 0x00000196},
 };
 
+static const u32 ar9462_2p0_baseband_postamble_5g_xlna[][5] = {
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
+	{0x00009e3c, 0xcf946220, 0xcf946220, 0xcfd5c782, 0xcfd5c282},
+};
+
+static const u32 ar9462_2p0_5g_xlna_only_rxgain[][2] = {
+	/* Addr      allmodes  */
+	{0x0000a000, 0x00010000},
+	{0x0000a004, 0x00030002},
+	{0x0000a008, 0x00050004},
+	{0x0000a00c, 0x00810080},
+	{0x0000a010, 0x00830082},
+	{0x0000a014, 0x01810180},
+	{0x0000a018, 0x01830182},
+	{0x0000a01c, 0x01850184},
+	{0x0000a020, 0x01890188},
+	{0x0000a024, 0x018b018a},
+	{0x0000a028, 0x018d018c},
+	{0x0000a02c, 0x03820190},
+	{0x0000a030, 0x03840383},
+	{0x0000a034, 0x03880385},
+	{0x0000a038, 0x038a0389},
+	{0x0000a03c, 0x038c038b},
+	{0x0000a040, 0x0390038d},
+	{0x0000a044, 0x03920391},
+	{0x0000a048, 0x03940393},
+	{0x0000a04c, 0x03960395},
+	{0x0000a050, 0x00000000},
+	{0x0000a054, 0x00000000},
+	{0x0000a058, 0x00000000},
+	{0x0000a05c, 0x00000000},
+	{0x0000a060, 0x00000000},
+	{0x0000a064, 0x00000000},
+	{0x0000a068, 0x00000000},
+	{0x0000a06c, 0x00000000},
+	{0x0000a070, 0x00000000},
+	{0x0000a074, 0x00000000},
+	{0x0000a078, 0x00000000},
+	{0x0000a07c, 0x00000000},
+	{0x0000a080, 0x29292929},
+	{0x0000a084, 0x29292929},
+	{0x0000a088, 0x29292929},
+	{0x0000a08c, 0x29292929},
+	{0x0000a090, 0x22292929},
+	{0x0000a094, 0x1d1d2222},
+	{0x0000a098, 0x0c111117},
+	{0x0000a09c, 0x00030303},
+	{0x0000a0a0, 0x00000000},
+	{0x0000a0a4, 0x00000000},
+	{0x0000a0a8, 0x00000000},
+	{0x0000a0ac, 0x00000000},
+	{0x0000a0b0, 0x00000000},
+	{0x0000a0b4, 0x00000000},
+	{0x0000a0b8, 0x00000000},
+	{0x0000a0bc, 0x00000000},
+	{0x0000a0c0, 0x001f0000},
+	{0x0000a0c4, 0x01000101},
+	{0x0000a0c8, 0x011e011f},
+	{0x0000a0cc, 0x011c011d},
+	{0x0000a0d0, 0x02030204},
+	{0x0000a0d4, 0x02010202},
+	{0x0000a0d8, 0x021f0200},
+	{0x0000a0dc, 0x0302021e},
+	{0x0000a0e0, 0x03000301},
+	{0x0000a0e4, 0x031e031f},
+	{0x0000a0e8, 0x0402031d},
+	{0x0000a0ec, 0x04000401},
+	{0x0000a0f0, 0x041e041f},
+	{0x0000a0f4, 0x0502041d},
+	{0x0000a0f8, 0x05000501},
+	{0x0000a0fc, 0x051e051f},
+	{0x0000a100, 0x06010602},
+	{0x0000a104, 0x061f0600},
+	{0x0000a108, 0x061d061e},
+	{0x0000a10c, 0x07020703},
+	{0x0000a110, 0x07000701},
+	{0x0000a114, 0x00000000},
+	{0x0000a118, 0x00000000},
+	{0x0000a11c, 0x00000000},
+	{0x0000a120, 0x00000000},
+	{0x0000a124, 0x00000000},
+	{0x0000a128, 0x00000000},
+	{0x0000a12c, 0x00000000},
+	{0x0000a130, 0x00000000},
+	{0x0000a134, 0x00000000},
+	{0x0000a138, 0x00000000},
+	{0x0000a13c, 0x00000000},
+	{0x0000a140, 0x001f0000},
+	{0x0000a144, 0x01000101},
+	{0x0000a148, 0x011e011f},
+	{0x0000a14c, 0x011c011d},
+	{0x0000a150, 0x02030204},
+	{0x0000a154, 0x02010202},
+	{0x0000a158, 0x021f0200},
+	{0x0000a15c, 0x0302021e},
+	{0x0000a160, 0x03000301},
+	{0x0000a164, 0x031e031f},
+	{0x0000a168, 0x0402031d},
+	{0x0000a16c, 0x04000401},
+	{0x0000a170, 0x041e041f},
+	{0x0000a174, 0x0502041d},
+	{0x0000a178, 0x05000501},
+	{0x0000a17c, 0x051e051f},
+	{0x0000a180, 0x06010602},
+	{0x0000a184, 0x061f0600},
+	{0x0000a188, 0x061d061e},
+	{0x0000a18c, 0x07020703},
+	{0x0000a190, 0x07000701},
+	{0x0000a194, 0x00000000},
+	{0x0000a198, 0x00000000},
+	{0x0000a19c, 0x00000000},
+	{0x0000a1a0, 0x00000000},
+	{0x0000a1a4, 0x00000000},
+	{0x0000a1a8, 0x00000000},
+	{0x0000a1ac, 0x00000000},
+	{0x0000a1b0, 0x00000000},
+	{0x0000a1b4, 0x00000000},
+	{0x0000a1b8, 0x00000000},
+	{0x0000a1bc, 0x00000000},
+	{0x0000a1c0, 0x00000000},
+	{0x0000a1c4, 0x00000000},
+	{0x0000a1c8, 0x00000000},
+	{0x0000a1cc, 0x00000000},
+	{0x0000a1d0, 0x00000000},
+	{0x0000a1d4, 0x00000000},
+	{0x0000a1d8, 0x00000000},
+	{0x0000a1dc, 0x00000000},
+	{0x0000a1e0, 0x00000000},
+	{0x0000a1e4, 0x00000000},
+	{0x0000a1e8, 0x00000000},
+	{0x0000a1ec, 0x00000000},
+	{0x0000a1f0, 0x00000396},
+	{0x0000a1f4, 0x00000396},
+	{0x0000a1f8, 0x00000396},
+	{0x0000a1fc, 0x00000196},
+	{0x0000b000, 0x00010000},
+	{0x0000b004, 0x00030002},
+	{0x0000b008, 0x00050004},
+	{0x0000b00c, 0x00810080},
+	{0x0000b010, 0x00830082},
+	{0x0000b014, 0x01810180},
+	{0x0000b018, 0x01830182},
+	{0x0000b01c, 0x01850184},
+	{0x0000b020, 0x02810280},
+	{0x0000b024, 0x02830282},
+	{0x0000b028, 0x02850284},
+	{0x0000b02c, 0x02890288},
+	{0x0000b030, 0x028b028a},
+	{0x0000b034, 0x0388028c},
+	{0x0000b038, 0x038a0389},
+	{0x0000b03c, 0x038c038b},
+	{0x0000b040, 0x0390038d},
+	{0x0000b044, 0x03920391},
+	{0x0000b048, 0x03940393},
+	{0x0000b04c, 0x03960395},
+	{0x0000b050, 0x00000000},
+	{0x0000b054, 0x00000000},
+	{0x0000b058, 0x00000000},
+	{0x0000b05c, 0x00000000},
+	{0x0000b060, 0x00000000},
+	{0x0000b064, 0x00000000},
+	{0x0000b068, 0x00000000},
+	{0x0000b06c, 0x00000000},
+	{0x0000b070, 0x00000000},
+	{0x0000b074, 0x00000000},
+	{0x0000b078, 0x00000000},
+	{0x0000b07c, 0x00000000},
+	{0x0000b080, 0x2a2d2f32},
+	{0x0000b084, 0x21232328},
+	{0x0000b088, 0x19191c1e},
+	{0x0000b08c, 0x12141417},
+	{0x0000b090, 0x07070e0e},
+	{0x0000b094, 0x03030305},
+	{0x0000b098, 0x00000003},
+	{0x0000b09c, 0x00000000},
+	{0x0000b0a0, 0x00000000},
+	{0x0000b0a4, 0x00000000},
+	{0x0000b0a8, 0x00000000},
+	{0x0000b0ac, 0x00000000},
+	{0x0000b0b0, 0x00000000},
+	{0x0000b0b4, 0x00000000},
+	{0x0000b0b8, 0x00000000},
+	{0x0000b0bc, 0x00000000},
+	{0x0000b0c0, 0x003f0020},
+	{0x0000b0c4, 0x00400041},
+	{0x0000b0c8, 0x0140005f},
+	{0x0000b0cc, 0x0160015f},
+	{0x0000b0d0, 0x017e017f},
+	{0x0000b0d4, 0x02410242},
+	{0x0000b0d8, 0x025f0240},
+	{0x0000b0dc, 0x027f0260},
+	{0x0000b0e0, 0x0341027e},
+	{0x0000b0e4, 0x035f0340},
+	{0x0000b0e8, 0x037f0360},
+	{0x0000b0ec, 0x04400441},
+	{0x0000b0f0, 0x0460045f},
+	{0x0000b0f4, 0x0541047f},
+	{0x0000b0f8, 0x055f0540},
+	{0x0000b0fc, 0x057f0560},
+	{0x0000b100, 0x06400641},
+	{0x0000b104, 0x0660065f},
+	{0x0000b108, 0x067e067f},
+	{0x0000b10c, 0x07410742},
+	{0x0000b110, 0x075f0740},
+	{0x0000b114, 0x077f0760},
+	{0x0000b118, 0x07800781},
+	{0x0000b11c, 0x07a0079f},
+	{0x0000b120, 0x07c107bf},
+	{0x0000b124, 0x000007c0},
+	{0x0000b128, 0x00000000},
+	{0x0000b12c, 0x00000000},
+	{0x0000b130, 0x00000000},
+	{0x0000b134, 0x00000000},
+	{0x0000b138, 0x00000000},
+	{0x0000b13c, 0x00000000},
+	{0x0000b140, 0x003f0020},
+	{0x0000b144, 0x00400041},
+	{0x0000b148, 0x0140005f},
+	{0x0000b14c, 0x0160015f},
+	{0x0000b150, 0x017e017f},
+	{0x0000b154, 0x02410242},
+	{0x0000b158, 0x025f0240},
+	{0x0000b15c, 0x027f0260},
+	{0x0000b160, 0x0341027e},
+	{0x0000b164, 0x035f0340},
+	{0x0000b168, 0x037f0360},
+	{0x0000b16c, 0x04400441},
+	{0x0000b170, 0x0460045f},
+	{0x0000b174, 0x0541047f},
+	{0x0000b178, 0x055f0540},
+	{0x0000b17c, 0x057f0560},
+	{0x0000b180, 0x06400641},
+	{0x0000b184, 0x0660065f},
+	{0x0000b188, 0x067e067f},
+	{0x0000b18c, 0x07410742},
+	{0x0000b190, 0x075f0740},
+	{0x0000b194, 0x077f0760},
+	{0x0000b198, 0x07800781},
+	{0x0000b19c, 0x07a0079f},
+	{0x0000b1a0, 0x07c107bf},
+	{0x0000b1a4, 0x000007c0},
+	{0x0000b1a8, 0x00000000},
+	{0x0000b1ac, 0x00000000},
+	{0x0000b1b0, 0x00000000},
+	{0x0000b1b4, 0x00000000},
+	{0x0000b1b8, 0x00000000},
+	{0x0000b1bc, 0x00000000},
+	{0x0000b1c0, 0x00000000},
+	{0x0000b1c4, 0x00000000},
+	{0x0000b1c8, 0x00000000},
+	{0x0000b1cc, 0x00000000},
+	{0x0000b1d0, 0x00000000},
+	{0x0000b1d4, 0x00000000},
+	{0x0000b1d8, 0x00000000},
+	{0x0000b1dc, 0x00000000},
+	{0x0000b1e0, 0x00000000},
+	{0x0000b1e4, 0x00000000},
+	{0x0000b1e8, 0x00000000},
+	{0x0000b1ec, 0x00000000},
+	{0x0000b1f0, 0x00000396},
+	{0x0000b1f4, 0x00000396},
+	{0x0000b1f8, 0x00000396},
+	{0x0000b1fc, 0x00000196},
+};
+
 #endif /* INITVALS_9462_2P0_H */
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index ed7d4fcbdcab..e07663964463 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -892,6 +892,7 @@ struct ath_hw {
 	struct ar5416IniArray iniCckfirJapan2484;
 	struct ar5416IniArray iniModes_9271_ANI_reg;
 	struct ar5416IniArray ini_radio_post_sys2ant;
+	struct ar5416IniArray ini_modes_rxgain_5g_xlna;
 
 	struct ar5416IniArray iniMac[ATH_INI_NUM_SPLIT];
 	struct ar5416IniArray iniBB[ATH_INI_NUM_SPLIT];
-- 
cgit v1.2.3


From e861ef523cd91270d108edc394e648b1f9e6fbd5 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 18 Jun 2013 10:13:43 +0530
Subject: ath9k: Modify IDs to identify CUS230

CUS198 and CUS230 are similar cards, both
are AR9485 + xLNA solutions. But, the subsystem IDs
differ - identify CUS230 explicitly to make things
clearer.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h | 1 +
 drivers/net/wireless/ath/ath9k/init.c  | 7 +++++--
 drivers/net/wireless/ath/ath9k/pci.c   | 6 ++++--
 3 files changed, 10 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 74965eefbd1c..1a0a1688502c 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -632,6 +632,7 @@ void ath_ant_comb_update(struct ath_softc *sc);
 /********************/
 
 #define ATH9K_PCI_CUS198 0x0001
+#define ATH9K_PCI_CUS230 0x0002
 
 /*
  * Default cache line size, in bytes.
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 7c2ed1cef9b7..0d17415a8a84 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -521,11 +521,14 @@ static void ath9k_init_platform(struct ath_softc *sc)
 	if (common->bus_ops->ath_bus_type != ATH_PCI)
 		return;
 
-	if (sc->driver_data & ATH9K_PCI_CUS198) {
+	if (sc->driver_data & (ATH9K_PCI_CUS198 |
+			       ATH9K_PCI_CUS230)) {
 		ah->config.xlna_gpio = 9;
 		ah->config.xatten_margin_cfg = true;
 
-		ath_info(common, "Set parameters for CUS198\n");
+		ath_info(common, "Set parameters for %s\n",
+			 (sc->driver_data & ATH9K_PCI_CUS198) ?
+			 "CUS198" : "CUS230");
 	}
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 4ac00b4b0d25..ddf0d78dbc48 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -51,16 +51,18 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
 			 PCI_VENDOR_ID_AZWAVE,
 			 0x2126),
 	  .driver_data = ATH9K_PCI_CUS198 },
+
+	/* PCI-E CUS230 */
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
 			 0x0032,
 			 PCI_VENDOR_ID_AZWAVE,
 			 0x2152),
-	  .driver_data = ATH9K_PCI_CUS198 },
+	  .driver_data = ATH9K_PCI_CUS230 },
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
 			 0x0032,
 			 PCI_VENDOR_ID_FOXCONN,
 			 0xE075),
-	  .driver_data = ATH9K_PCI_CUS198 },
+	  .driver_data = ATH9K_PCI_CUS230 },
 
 	{ PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E  AR9485 */
 	{ PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E  AR9580 */
-- 
cgit v1.2.3


From 7b5d6043de31290de98e9232cbd9a07968aef5bd Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Tue, 18 Jun 2013 07:33:40 +0200
Subject: ssb: register serial flash as platform device
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This allows writing MTD driver working as a platform driver. In
platform_data it will receive struct ssb_sflash, which contains all
important data about flash (window, size).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/ssb/driver_chipcommon_sflash.c | 19 +++++++++++++++++++
 drivers/ssb/main.c                     |  8 ++++++++
 drivers/ssb/ssb_private.h              |  4 ++++
 3 files changed, 31 insertions(+)

(limited to 'drivers')

diff --git a/drivers/ssb/driver_chipcommon_sflash.c b/drivers/ssb/driver_chipcommon_sflash.c
index 205f1c499c46..e84cf04f4416 100644
--- a/drivers/ssb/driver_chipcommon_sflash.c
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -9,6 +9,19 @@
 
 #include "ssb_private.h"
 
+static struct resource ssb_sflash_resource = {
+	.name	= "ssb_sflash",
+	.start	= SSB_FLASH2,
+	.end	= 0,
+	.flags  = IORESOURCE_MEM | IORESOURCE_READONLY,
+};
+
+struct platform_device ssb_sflash_dev = {
+	.name		= "ssb_sflash",
+	.resource	= &ssb_sflash_resource,
+	.num_resources	= 1,
+};
+
 struct ssb_sflash_tbl_e {
 	char *name;
 	u32 id;
@@ -141,6 +154,12 @@ int ssb_sflash_init(struct ssb_chipcommon *cc)
 	pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
 		e->name, e->blocksize, e->numblocks);
 
+	/* Prepare platform device, but don't register it yet. It's too early,
+	 * malloc (required by device_private_init) is not available yet. */
+	ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
+					 sflash->size;
+	ssb_sflash_dev.dev.platform_data = sflash;
+
 	pr_err("Serial flash support is not implemented yet!\n");
 
 	return -ENOTSUPP;
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 812775a4bfb6..e55ddf7cd7c2 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -553,6 +553,14 @@ static int ssb_devices_register(struct ssb_bus *bus)
 	}
 #endif
 
+#ifdef CONFIG_SSB_SFLASH
+	if (bus->mipscore.sflash.present) {
+		err = platform_device_register(&ssb_sflash_dev);
+		if (err)
+			pr_err("Error registering serial flash\n");
+	}
+#endif
+
 	return 0;
 error:
 	/* Unwind the already registered devices. */
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index 4671f17f09af..eb507a50a564 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -243,6 +243,10 @@ static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
 extern struct platform_device ssb_pflash_dev;
 #endif
 
+#ifdef CONFIG_SSB_SFLASH
+extern struct platform_device ssb_sflash_dev;
+#endif
+
 #ifdef CONFIG_SSB_DRIVER_EXTIF
 extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
 extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
-- 
cgit v1.2.3


From e57426720f04587da79865176176f581cf79a11a Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Tue, 18 Jun 2013 10:28:46 +0300
Subject: ath10k: off by one sanity check

This should be >= ARRAY_SIZE() instead of > ARRAY_SIZE().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 8e4e8327d33e..c8e905669701 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1772,7 +1772,7 @@ static irqreturn_t ath10k_pci_per_engine_handler(int irq, void *arg)
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ce_id = irq - ar_pci->pdev->irq - MSI_ASSIGN_CE_INITIAL;
 
-	if (ce_id < 0 || ce_id > ARRAY_SIZE(ar_pci->pipe_info)) {
+	if (ce_id < 0 || ce_id >= ARRAY_SIZE(ar_pci->pipe_info)) {
 		ath10k_warn("unexpected/invalid irq %d ce_id %d\n", irq, ce_id);
 		return IRQ_HANDLED;
 	}
-- 
cgit v1.2.3


From 12eea64003abcb10563eaefc98ce0aeb58b05f61 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 18 Jun 2013 15:42:36 +0530
Subject: ath9k: Add PCI IDs for CUS217

CUS217 is a card based on AR9462.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  1 +
 drivers/net/wireless/ath/ath9k/init.c  |  2 ++
 drivers/net/wireless/ath/ath9k/pci.c   | 13 +++++++++++++
 3 files changed, 16 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 1a0a1688502c..04b2d3ea728f 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -633,6 +633,7 @@ void ath_ant_comb_update(struct ath_softc *sc);
 
 #define ATH9K_PCI_CUS198 0x0001
 #define ATH9K_PCI_CUS230 0x0002
+#define ATH9K_PCI_CUS217 0x0004
 
 /*
  * Default cache line size, in bytes.
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 0d17415a8a84..1e555d899469 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -529,6 +529,8 @@ static void ath9k_init_platform(struct ath_softc *sc)
 		ath_info(common, "Set parameters for %s\n",
 			 (sc->driver_data & ATH9K_PCI_CUS198) ?
 			 "CUS198" : "CUS230");
+	} else if (sc->driver_data & ATH9K_PCI_CUS217) {
+		ath_info(common, "CUS217 card detected\n");
 	}
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index ddf0d78dbc48..b096bb2c28c8 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -66,6 +66,19 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
 
 	{ PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E  AR9485 */
 	{ PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E  AR9580 */
+
+	/* PCI-E CUS217 */
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+			 0x0034,
+			 PCI_VENDOR_ID_AZWAVE,
+			 0x2116),
+	  .driver_data = ATH9K_PCI_CUS217 },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+			 0x0034,
+			 0x11AD, /* LITEON */
+			 0x6661),
+	  .driver_data = ATH9K_PCI_CUS217 },
+
 	{ PCI_VDEVICE(ATHEROS, 0x0034) }, /* PCI-E  AR9462 */
 	{ PCI_VDEVICE(ATHEROS, 0x0037) }, /* PCI-E  AR1111/AR9485 */
 	{ PCI_VDEVICE(ATHEROS, 0x0036) }, /* PCI-E  AR9565 */
-- 
cgit v1.2.3


From a86ff3cf47b3ba868214bfb8d2181409913ccbbe Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 18 Jun 2013 15:42:37 +0530
Subject: ath9k: Add initvals required for CUS217

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
index bcd0cae1048d..1d6b705ba110 100644
--- a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
@@ -1714,4 +1714,19 @@ static const u32 ar9462_2p0_5g_xlna_only_rxgain[][2] = {
 	{0x0000b1fc, 0x00000196},
 };
 
+static const u32 ar9462_2p0_baseband_core_mix_rxgain[][2] = {
+	/* Addr      allmodes  */
+	{0x00009fd0, 0x0a2d6b93},
+};
+
+static const u32 ar9462_2p0_baseband_postamble_mix_rxgain[][5] = {
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
+	{0x00009820, 0x206a022e, 0x206a022e, 0x206a01ae, 0x206a01ae},
+	{0x00009824, 0x63c640de, 0x5ac640d0, 0x63c640da, 0x63c640da},
+	{0x00009828, 0x0796be89, 0x0696b081, 0x0916be81, 0x0916be81},
+	{0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000d8, 0x6c4000d8},
+	{0x00009e10, 0x92c88d2e, 0x7ec88d2e, 0x7ec86d2e, 0x7ec86d2e},
+	{0x00009e14, 0x37b95d5e, 0x37b9605e, 0x3236605e, 0x32395c5e},
+};
+
 #endif /* INITVALS_9462_2P0_H */
-- 
cgit v1.2.3


From c177fabe20c60d0670bbf2fcc83440ae37fc4553 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Tue, 18 Jun 2013 15:42:38 +0530
Subject: ath9k: Program initvals for CUS217

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_hw.c  |  4 ++++
 drivers/net/wireless/ath/ath9k/ar9003_phy.c | 10 ++++++++++
 drivers/net/wireless/ath/ath9k/hw.h         |  2 ++
 3 files changed, 16 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index ce748afd7f1a..671aaa7e7337 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -630,6 +630,10 @@ static void ar9003_rx_gain_table_mode2(struct ath_hw *ah)
 	if (AR_SREV_9462_20(ah)) {
 		INIT_INI_ARRAY(&ah->iniModesRxGain,
 			       ar9462_common_mixed_rx_gain_table_2p0);
+		INIT_INI_ARRAY(&ah->ini_modes_rxgain_bb_core,
+			       ar9462_2p0_baseband_core_mix_rxgain);
+		INIT_INI_ARRAY(&ah->ini_modes_rxgain_bb_postamble,
+			       ar9462_2p0_baseband_postamble_mix_rxgain);
 		INIT_INI_ARRAY(&ah->ini_modes_rxgain_5g_xlna,
 			       ar9462_2p0_baseband_postamble_5g_xlna);
 	}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index df919e2b61d5..df84d20e1092 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -755,6 +755,16 @@ static int ar9003_hw_process_ini(struct ath_hw *ah,
 	REG_WRITE_ARRAY(&ah->iniModesRxGain, 1, regWrites);
 
 	if (AR_SREV_9462_20(ah)) {
+		/*
+		 * CUS217 mix LNA mode.
+		 */
+		if (ar9003_hw_get_rx_gain_idx(ah) == 2) {
+			REG_WRITE_ARRAY(&ah->ini_modes_rxgain_bb_core,
+					1, regWrites);
+			REG_WRITE_ARRAY(&ah->ini_modes_rxgain_bb_postamble,
+					modesIndex, regWrites);
+		}
+
 		/*
 		 * 5G-XLNA
 		 */
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index e07663964463..cd74b3afef7d 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -893,6 +893,8 @@ struct ath_hw {
 	struct ar5416IniArray iniModes_9271_ANI_reg;
 	struct ar5416IniArray ini_radio_post_sys2ant;
 	struct ar5416IniArray ini_modes_rxgain_5g_xlna;
+	struct ar5416IniArray ini_modes_rxgain_bb_core;
+	struct ar5416IniArray ini_modes_rxgain_bb_postamble;
 
 	struct ar5416IniArray iniMac[ATH_INI_NUM_SPLIT];
 	struct ar5416IniArray iniBB[ATH_INI_NUM_SPLIT];
-- 
cgit v1.2.3


From 7d747037b0642f6d939d6b0bb255b938b5f3c3ab Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Tue, 18 Jun 2013 13:29:22 +0200
Subject: brcmfmac: Only use credits for bcmc when firmware indicates it.

The firmware will sent an event message when bc/mc traffic should
be sent to the device using credit mechanism.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fweh.h     |  3 +-
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 32 +++++++++++++++++++++-
 2 files changed, 33 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
index 6ec5db9c60a5..e679214b3c98 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
@@ -101,7 +101,8 @@ struct brcmf_event;
 	BRCMF_ENUM_DEF(P2P_PROBEREQ_MSG, 72) \
 	BRCMF_ENUM_DEF(DCS_REQUEST, 73) \
 	BRCMF_ENUM_DEF(FIFO_CREDIT_MAP, 74) \
-	BRCMF_ENUM_DEF(ACTION_FRAME_RX, 75)
+	BRCMF_ENUM_DEF(ACTION_FRAME_RX, 75) \
+	BRCMF_ENUM_DEF(BCMC_CREDIT_SUPPORT, 127)
 
 #define BRCMF_ENUM_DEF(id, val) \
 	BRCMF_E_##id = (val),
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index 70f70cea7f7d..1d8fa7dfa53d 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -426,6 +426,7 @@ struct brcmf_fws_info {
 	struct brcmf_fws_stats stats;
 	struct brcmf_fws_hanger hanger;
 	enum brcmf_fws_fcmode fcmode;
+	bool bcmc_credit_check;
 	struct brcmf_fws_macdesc_table desc;
 	struct workqueue_struct *fws_wq;
 	struct work_struct fws_dequeue_work;
@@ -1438,6 +1439,20 @@ static int brcmf_fws_notify_credit_map(struct brcmf_if *ifp,
 	return 0;
 }
 
+static int brcmf_fws_notify_bcmc_credit_support(struct brcmf_if *ifp,
+						const struct brcmf_event_msg *e,
+						void *data)
+{
+	struct brcmf_fws_info *fws = ifp->drvr->fws;
+	ulong flags;
+
+	brcmf_fws_lock(ifp->drvr, flags);
+	if (fws)
+		fws->bcmc_credit_check = true;
+	brcmf_fws_unlock(ifp->drvr, flags);
+	return 0;
+}
+
 int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len,
 		      struct sk_buff *skb)
 {
@@ -1806,6 +1821,12 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 		  eh->h_dest, multicast, fifo);
 
 	brcmf_fws_lock(drvr, flags);
+	/* multicast credit support is conditional, setting
+	 * flag to false to assure credit is consumed below.
+	 */
+	if (fws->bcmc_credit_check)
+		multicast = false;
+
 	if (skcb->mac->suppressed ||
 	    fws->bus_flow_blocked ||
 	    brcmf_fws_mac_desc_closed(fws, skcb->mac, fifo) ||
@@ -1878,7 +1899,8 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker)
 	brcmf_fws_lock(fws->drvr, flags);
 	for (fifo = NL80211_NUM_ACS; fifo >= 0 && !fws->bus_flow_blocked;
 	     fifo--) {
-		while (fws->fifo_credit[fifo]) {
+		while ((fws->fifo_credit[fifo]) || ((!fws->bcmc_credit_check) &&
+		       (fifo == BRCMF_FWS_FIFO_BCMC))) {
 			skb = brcmf_fws_deq(fws, fifo);
 			if (!skb)
 				break;
@@ -1947,6 +1969,13 @@ int brcmf_fws_init(struct brcmf_pub *drvr)
 		brcmf_err("register credit map handler failed\n");
 		goto fail;
 	}
+	rc = brcmf_fweh_register(drvr, BRCMF_E_BCMC_CREDIT_SUPPORT,
+				 brcmf_fws_notify_bcmc_credit_support);
+	if (rc < 0) {
+		brcmf_err("register bcmc credit handler failed\n");
+		brcmf_fweh_unregister(drvr, BRCMF_E_FIFO_CREDIT_MAP);
+		goto fail;
+	}
 
 	/* setting the iovar may fail if feature is unsupported
 	 * so leave the rc as is so driver initialization can
@@ -1971,6 +2000,7 @@ int brcmf_fws_init(struct brcmf_pub *drvr)
 	return 0;
 
 fail_event:
+	brcmf_fweh_unregister(drvr, BRCMF_E_BCMC_CREDIT_SUPPORT);
 	brcmf_fweh_unregister(drvr, BRCMF_E_FIFO_CREDIT_MAP);
 fail:
 	brcmf_fws_deinit(drvr);
-- 
cgit v1.2.3


From 4e89dfca87ae5a97c616c6ac9b2a9a15cc28903d Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 18 Jun 2013 13:29:23 +0200
Subject: brcmfmac: rename variable prec to more appropriate name, ie. fifo

The term prec (precedence) is different from the fifo number. Rename
use of prec with fifo to be consistent and clear.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index 1d8fa7dfa53d..e66b723c1279 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -839,7 +839,7 @@ static int brcmf_fws_hdrpush(struct brcmf_fws_info *fws, struct sk_buff *skb)
 
 static bool brcmf_fws_tim_update(struct brcmf_fws_info *fws,
 				 struct brcmf_fws_mac_descriptor *entry,
-				 int prec, bool send_immediately)
+				 int fifo, bool send_immediately)
 {
 	struct sk_buff *skb;
 	struct brcmf_bus *bus;
@@ -848,10 +848,10 @@ static bool brcmf_fws_tim_update(struct brcmf_fws_info *fws,
 	u32 len;
 
 	/* check delayedQ and suppressQ in one call using bitmap */
-	if (brcmu_pktq_mlen(&entry->psq, 3 << (prec * 2)) == 0)
-		entry->traffic_pending_bmp &= ~NBITVAL(prec);
+	if (brcmu_pktq_mlen(&entry->psq, 3 << (fifo * 2)) == 0)
+		entry->traffic_pending_bmp &= ~NBITVAL(fifo);
 	else
-		entry->traffic_pending_bmp |= NBITVAL(prec);
+		entry->traffic_pending_bmp |= NBITVAL(fifo);
 
 	entry->send_tim_signal = false;
 	if (entry->traffic_lastreported_bmp != entry->traffic_pending_bmp)
-- 
cgit v1.2.3


From ae66460989f1dd62da760c6123820d9741315260 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 18 Jun 2013 13:29:24 +0200
Subject: brcmfmac: remove dependency with nl80211.h

The firmware-signalling code used NL80211_NUM_ACS, but it has
its own definition enum brcmf_fws_fifo, which is more appropriate
to use. This effectively removes the need to include nl80211.h.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index e66b723c1279..b702f3e6d882 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -22,7 +22,6 @@
 #include <linux/etherdevice.h>
 #include <linux/err.h>
 #include <linux/jiffies.h>
-#include <uapi/linux/nl80211.h>
 #include <net/cfg80211.h>
 
 #include <brcmu_utils.h>
@@ -142,7 +141,7 @@ static const char *brcmf_fws_get_tlv_name(enum brcmf_fws_tlv_type id)
 #define BRCMF_FWS_FLOWCONTROL_HIWATER			128
 #define BRCMF_FWS_FLOWCONTROL_LOWATER			64
 
-#define BRCMF_FWS_PSQ_PREC_COUNT		((NL80211_NUM_ACS + 1) * 2)
+#define BRCMF_FWS_PSQ_PREC_COUNT		((BRCMF_FWS_FIFO_COUNT + 1) * 2)
 #define BRCMF_FWS_PSQ_LEN				256
 
 #define BRCMF_FWS_HTOD_FLAG_PKTFROMHOST			0x01
-- 
cgit v1.2.3


From 1ab083a3752760ec7751a7fa43db555d2d6f1e6a Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 18 Jun 2013 13:29:25 +0200
Subject: brcmfmac: consolidate mac_descriptor related function names

Just cleaning up and being consistent in naming operations
related to struct brcmf_fws_mac_descriptor objects.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 53 +++++++++++-----------
 1 file changed, 26 insertions(+), 27 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index b702f3e6d882..13e75c4b1a6b 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -631,8 +631,8 @@ static void brcmf_fws_macdesc_set_name(struct brcmf_fws_info *fws,
 			  desc->interface_id);
 }
 
-static void brcmf_fws_init_mac_descriptor(struct brcmf_fws_mac_descriptor *desc,
-					  u8 *addr, u8 ifidx)
+static void brcmf_fws_macdesc_init(struct brcmf_fws_mac_descriptor *desc,
+				   u8 *addr, u8 ifidx)
 {
 	brcmf_dbg(TRACE,
 		  "enter: desc %p ea=%pM, ifidx=%u\n", desc, addr, ifidx);
@@ -648,7 +648,7 @@ static void brcmf_fws_init_mac_descriptor(struct brcmf_fws_mac_descriptor *desc,
 }
 
 static
-void brcmf_fws_clear_mac_descriptor(struct brcmf_fws_mac_descriptor *desc)
+void brcmf_fws_macdesc_deinit(struct brcmf_fws_mac_descriptor *desc)
 {
 	brcmf_dbg(TRACE,
 		  "enter: ea=%pM, ifidx=%u\n", desc->ea, desc->interface_id);
@@ -659,7 +659,7 @@ void brcmf_fws_clear_mac_descriptor(struct brcmf_fws_mac_descriptor *desc)
 }
 
 static struct brcmf_fws_mac_descriptor *
-brcmf_fws_mac_descriptor_lookup(struct brcmf_fws_info *fws, u8 *ea)
+brcmf_fws_macdesc_lookup(struct brcmf_fws_info *fws, u8 *ea)
 {
 	struct brcmf_fws_mac_descriptor *entry;
 	int i;
@@ -678,8 +678,7 @@ brcmf_fws_mac_descriptor_lookup(struct brcmf_fws_info *fws, u8 *ea)
 }
 
 static struct brcmf_fws_mac_descriptor*
-brcmf_fws_find_mac_desc(struct brcmf_fws_info *fws, struct brcmf_if *ifp,
-			u8 *da)
+brcmf_fws_macdesc_find(struct brcmf_fws_info *fws, struct brcmf_if *ifp, u8 *da)
 {
 	struct brcmf_fws_mac_descriptor *entry = &fws->desc.other;
 	bool multicast;
@@ -695,7 +694,7 @@ brcmf_fws_find_mac_desc(struct brcmf_fws_info *fws, struct brcmf_if *ifp,
 		goto done;
 	}
 
-	entry = brcmf_fws_mac_descriptor_lookup(fws, da);
+	entry = brcmf_fws_macdesc_lookup(fws, da);
 	if (IS_ERR(entry))
 		entry = ifp->fws_desc;
 
@@ -703,9 +702,9 @@ done:
 	return entry;
 }
 
-static bool brcmf_fws_mac_desc_closed(struct brcmf_fws_info *fws,
-				      struct brcmf_fws_mac_descriptor *entry,
-				      int fifo)
+static bool brcmf_fws_macdesc_closed(struct brcmf_fws_info *fws,
+				     struct brcmf_fws_mac_descriptor *entry,
+				     int fifo)
 {
 	struct brcmf_fws_mac_descriptor *if_entry;
 	bool closed;
@@ -728,9 +727,9 @@ static bool brcmf_fws_mac_desc_closed(struct brcmf_fws_info *fws,
 	return closed || !(entry->ac_bitmap & BIT(fifo));
 }
 
-static void brcmf_fws_mac_desc_cleanup(struct brcmf_fws_info *fws,
-				       struct brcmf_fws_mac_descriptor *entry,
-				       int ifidx)
+static void brcmf_fws_macdesc_cleanup(struct brcmf_fws_info *fws,
+				      struct brcmf_fws_mac_descriptor *entry,
+				      int ifidx)
 {
 	if (entry->occupied && (ifidx == -1 || ifidx == entry->interface_id)) {
 		brcmf_fws_psq_flush(fws, &entry->psq, ifidx);
@@ -782,9 +781,9 @@ static void brcmf_fws_cleanup(struct brcmf_fws_info *fws, int ifidx)
 	/* cleanup individual nodes */
 	table = &fws->desc.nodes[0];
 	for (i = 0; i < ARRAY_SIZE(fws->desc.nodes); i++)
-		brcmf_fws_mac_desc_cleanup(fws, &table[i], ifidx);
+		brcmf_fws_macdesc_cleanup(fws, &table[i], ifidx);
 
-	brcmf_fws_mac_desc_cleanup(fws, &fws->desc.other, ifidx);
+	brcmf_fws_macdesc_cleanup(fws, &fws->desc.other, ifidx);
 	brcmf_fws_bus_txq_cleanup(fws, matchfn, ifidx);
 	brcmf_fws_hanger_cleanup(fws, matchfn, ifidx);
 }
@@ -924,18 +923,18 @@ int brcmf_fws_macdesc_indicate(struct brcmf_fws_info *fws, u8 type, u8 *data)
 		if (entry->occupied) {
 			brcmf_dbg(TRACE, "deleting %s mac %pM\n",
 				  entry->name, addr);
-			brcmf_fws_mac_desc_cleanup(fws, entry, -1);
-			brcmf_fws_clear_mac_descriptor(entry);
+			brcmf_fws_macdesc_cleanup(fws, entry, -1);
+			brcmf_fws_macdesc_deinit(entry);
 		} else
 			fws->stats.mac_update_failed++;
 		return 0;
 	}
 
-	existing = brcmf_fws_mac_descriptor_lookup(fws, addr);
+	existing = brcmf_fws_macdesc_lookup(fws, addr);
 	if (IS_ERR(existing)) {
 		if (!entry->occupied) {
 			entry->mac_handle = mac_handle;
-			brcmf_fws_init_mac_descriptor(entry, addr, ifidx);
+			brcmf_fws_macdesc_init(entry, addr, ifidx);
 			brcmf_fws_macdesc_set_name(fws, entry);
 			brcmu_pktq_init(&entry->psq, BRCMF_FWS_PSQ_PREC_COUNT,
 					BRCMF_FWS_PSQ_LEN);
@@ -949,7 +948,7 @@ int brcmf_fws_macdesc_indicate(struct brcmf_fws_info *fws, u8 type, u8 *data)
 			memcpy(entry, existing,
 			       offsetof(struct brcmf_fws_mac_descriptor, psq));
 			entry->mac_handle = mac_handle;
-			brcmf_fws_clear_mac_descriptor(existing);
+			brcmf_fws_macdesc_deinit(existing);
 			brcmf_fws_macdesc_set_name(fws, entry);
 			brcmf_dbg(TRACE, "relocate %s mac %pM\n", entry->name,
 				  addr);
@@ -1189,7 +1188,7 @@ static struct sk_buff *brcmf_fws_deq(struct brcmf_fws_info *fws, int fifo)
 	for (i = 0; i < num_nodes; i++) {
 		entry = &table[(node_pos + i) % num_nodes];
 		if (!entry->occupied ||
-		    brcmf_fws_mac_desc_closed(fws, entry, fifo))
+		    brcmf_fws_macdesc_closed(fws, entry, fifo))
 			continue;
 
 		if (entry->suppressed)
@@ -1810,7 +1809,7 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 
 	/* set control buffer information */
 	skcb->if_flags = 0;
-	skcb->mac = brcmf_fws_find_mac_desc(fws, ifp, eh->h_dest);
+	skcb->mac = brcmf_fws_macdesc_find(fws, ifp, eh->h_dest);
 	skcb->state = BRCMF_FWS_SKBSTATE_NEW;
 	brcmf_skb_if_flags_set_field(skb, INDEX, ifp->ifidx);
 	if (!multicast)
@@ -1828,7 +1827,7 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 
 	if (skcb->mac->suppressed ||
 	    fws->bus_flow_blocked ||
-	    brcmf_fws_mac_desc_closed(fws, skcb->mac, fifo) ||
+	    brcmf_fws_macdesc_closed(fws, skcb->mac, fifo) ||
 	    brcmu_pktq_mlen(&skcb->mac->psq, 3 << (fifo * 2)) ||
 	    (!multicast &&
 	     brcmf_fws_consume_credit(fws, fifo, skb) < 0)) {
@@ -1850,7 +1849,7 @@ void brcmf_fws_reset_interface(struct brcmf_if *ifp)
 	if (!entry)
 		return;
 
-	brcmf_fws_init_mac_descriptor(entry, ifp->mac_addr, ifp->ifidx);
+	brcmf_fws_macdesc_init(entry, ifp->mac_addr, ifp->ifidx);
 }
 
 void brcmf_fws_add_interface(struct brcmf_if *ifp)
@@ -1863,7 +1862,7 @@ void brcmf_fws_add_interface(struct brcmf_if *ifp)
 
 	entry = &fws->desc.iface[ifp->ifidx];
 	ifp->fws_desc = entry;
-	brcmf_fws_init_mac_descriptor(entry, ifp->mac_addr, ifp->ifidx);
+	brcmf_fws_macdesc_init(entry, ifp->mac_addr, ifp->ifidx);
 	brcmf_fws_macdesc_set_name(fws, entry);
 	brcmu_pktq_init(&entry->psq, BRCMF_FWS_PSQ_PREC_COUNT,
 			BRCMF_FWS_PSQ_LEN);
@@ -1881,7 +1880,7 @@ void brcmf_fws_del_interface(struct brcmf_if *ifp)
 	brcmf_fws_lock(ifp->drvr, flags);
 	ifp->fws_desc = NULL;
 	brcmf_dbg(TRACE, "deleting %s\n", entry->name);
-	brcmf_fws_clear_mac_descriptor(entry);
+	brcmf_fws_macdesc_deinit(entry);
 	brcmf_fws_cleanup(ifp->drvr->fws, ifp->ifidx);
 	brcmf_fws_unlock(ifp->drvr, flags);
 }
@@ -1986,7 +1985,7 @@ int brcmf_fws_init(struct brcmf_pub *drvr)
 	}
 
 	brcmf_fws_hanger_init(&drvr->fws->hanger);
-	brcmf_fws_init_mac_descriptor(&drvr->fws->desc.other, NULL, 0);
+	brcmf_fws_macdesc_init(&drvr->fws->desc.other, NULL, 0);
 	brcmf_fws_macdesc_set_name(drvr->fws, &drvr->fws->desc.other);
 	brcmu_pktq_init(&drvr->fws->desc.other.psq, BRCMF_FWS_PSQ_PREC_COUNT,
 			BRCMF_FWS_PSQ_LEN);
-- 
cgit v1.2.3


From fccfe93036312f3ad35d37c2ca960f104c6e7f21 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 18 Jun 2013 13:29:26 +0200
Subject: brcmfmac: simplify dpc handling using atomic operations

Instead of allocating an empty list item and queue that for
the dpc data worker to dequeue an atomic counter is used.

Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 70 ++++------------------
 1 file changed, 12 insertions(+), 58 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 6f3d181659ef..d4db0c7cd692 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -495,8 +495,7 @@ struct brcmf_sdio {
 
 	struct workqueue_struct *brcmf_wq;
 	struct work_struct datawork;
-	struct list_head dpc_tsklst;
-	spinlock_t dpc_tl_lock;
+	atomic_t dpc_tskcnt;
 
 	const struct firmware *firmware;
 	u32 fw_ptr;
@@ -2061,23 +2060,6 @@ static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus)
 	}
 }
 
-static inline void brcmf_sdbrcm_adddpctsk(struct brcmf_sdio *bus)
-{
-	struct list_head *new_hd;
-	unsigned long flags;
-
-	if (in_interrupt())
-		new_hd = kzalloc(sizeof(struct list_head), GFP_ATOMIC);
-	else
-		new_hd = kzalloc(sizeof(struct list_head), GFP_KERNEL);
-	if (new_hd == NULL)
-		return;
-
-	spin_lock_irqsave(&bus->dpc_tl_lock, flags);
-	list_add_tail(new_hd, &bus->dpc_tsklst);
-	spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
-}
-
 static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 {
 	u8 idx;
@@ -2312,7 +2294,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 		   (!atomic_read(&bus->fcstate) &&
 		    brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
 		    data_ok(bus)) || PKT_AVAILABLE()) {
-		brcmf_sdbrcm_adddpctsk(bus);
+		atomic_inc(&bus->dpc_tskcnt);
 	}
 
 	/* If we're done for now, turn off clock request. */
@@ -2342,7 +2324,6 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct brcmf_sdio *bus = sdiodev->bus;
-	unsigned long flags;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -2381,14 +2362,9 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
 		qcount[prec] = pktq_plen(&bus->txq, prec);
 #endif
 
-	spin_lock_irqsave(&bus->dpc_tl_lock, flags);
-	if (list_empty(&bus->dpc_tsklst)) {
-		spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
-
-		brcmf_sdbrcm_adddpctsk(bus);
+	if (atomic_read(&bus->dpc_tskcnt) == 0) {
+		atomic_inc(&bus->dpc_tskcnt);
 		queue_work(bus->brcmf_wq, &bus->datawork);
-	} else {
-		spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
 	}
 
 	return ret;
@@ -2525,7 +2501,6 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct brcmf_sdio *bus = sdiodev->bus;
-	unsigned long flags;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -2612,18 +2587,13 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 		} while (ret < 0 && retries++ < TXRETRIES);
 	}
 
-	spin_lock_irqsave(&bus->dpc_tl_lock, flags);
 	if ((bus->idletime == BRCMF_IDLE_IMMEDIATE) &&
-	    list_empty(&bus->dpc_tsklst)) {
-		spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
-
+	    atomic_read(&bus->dpc_tskcnt) == 0) {
 		bus->activity = false;
 		sdio_claim_host(bus->sdiodev->func[1]);
 		brcmf_dbg(INFO, "idle\n");
 		brcmf_sdbrcm_clkctl(bus, CLK_NONE, true);
 		sdio_release_host(bus->sdiodev->func[1]);
-	} else {
-		spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
 	}
 
 	if (ret)
@@ -3451,7 +3421,7 @@ void brcmf_sdbrcm_isr(void *arg)
 	if (!bus->intr)
 		brcmf_err("isr w/o interrupt configured!\n");
 
-	brcmf_sdbrcm_adddpctsk(bus);
+	atomic_inc(&bus->dpc_tskcnt);
 	queue_work(bus->brcmf_wq, &bus->datawork);
 }
 
@@ -3460,7 +3430,6 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
 #ifdef DEBUG
 	struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev);
 #endif	/* DEBUG */
-	unsigned long flags;
 
 	brcmf_dbg(TIMER, "Enter\n");
 
@@ -3476,11 +3445,9 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
 		if (!bus->intr ||
 		    (bus->sdcnt.intrcount == bus->sdcnt.lastintrs)) {
 
-			spin_lock_irqsave(&bus->dpc_tl_lock, flags);
-			if (list_empty(&bus->dpc_tsklst)) {
+			if (atomic_read(&bus->dpc_tskcnt) == 0) {
 				u8 devpend;
-				spin_unlock_irqrestore(&bus->dpc_tl_lock,
-						       flags);
+
 				sdio_claim_host(bus->sdiodev->func[1]);
 				devpend = brcmf_sdio_regrb(bus->sdiodev,
 							   SDIO_CCCR_INTx,
@@ -3489,9 +3456,6 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
 				intstatus =
 				    devpend & (INTR_STATUS_FUNC1 |
 					       INTR_STATUS_FUNC2);
-			} else {
-				spin_unlock_irqrestore(&bus->dpc_tl_lock,
-						       flags);
 			}
 
 			/* If there is something, make like the ISR and
@@ -3500,7 +3464,7 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
 				bus->sdcnt.pollcnt++;
 				atomic_set(&bus->ipend, 1);
 
-				brcmf_sdbrcm_adddpctsk(bus);
+				atomic_inc(&bus->dpc_tskcnt);
 				queue_work(bus->brcmf_wq, &bus->datawork);
 			}
 		}
@@ -3566,20 +3530,11 @@ static void brcmf_sdio_dataworker(struct work_struct *work)
 {
 	struct brcmf_sdio *bus = container_of(work, struct brcmf_sdio,
 					      datawork);
-	struct list_head *cur_hd, *tmp_hd;
-	unsigned long flags;
-
-	spin_lock_irqsave(&bus->dpc_tl_lock, flags);
-	list_for_each_safe(cur_hd, tmp_hd, &bus->dpc_tsklst) {
-		spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
 
+	while (atomic_read(&bus->dpc_tskcnt)) {
 		brcmf_sdbrcm_dpc(bus);
-
-		spin_lock_irqsave(&bus->dpc_tl_lock, flags);
-		list_del(cur_hd);
-		kfree(cur_hd);
+		atomic_dec(&bus->dpc_tskcnt);
 	}
-	spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
 }
 
 static void brcmf_sdbrcm_release_malloc(struct brcmf_sdio *bus)
@@ -3927,8 +3882,7 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
 		bus->watchdog_tsk = NULL;
 	}
 	/* Initialize DPC thread */
-	INIT_LIST_HEAD(&bus->dpc_tsklst);
-	spin_lock_init(&bus->dpc_tl_lock);
+	atomic_set(&bus->dpc_tskcnt, 0);
 
 	/* Assign bus interface call back */
 	bus->sdiodev->bus_if->dev = bus->sdiodev->dev;
-- 
cgit v1.2.3


From 16035d51b3e49e6e90b2e324feb437ed7893b045 Mon Sep 17 00:00:00 2001
From: Franky Lin <frankyl@broadcom.com>
Date: Tue, 18 Jun 2013 13:29:27 +0200
Subject: brcmfmac: remove redundant chip ID check in dhd_sdio

There is an ID table registered to SDIO stack which consists of all SDIO devices
supported by brcmfmac. It is not necessary to have an extra check.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 22 ----------------------
 1 file changed, 22 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index d4db0c7cd692..cb22f2f51453 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3509,23 +3509,6 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
 	return (atomic_read(&bus->ipend) > 0);
 }
 
-static bool brcmf_sdbrcm_chipmatch(u16 chipid)
-{
-	if (chipid == BCM43143_CHIP_ID)
-		return true;
-	if (chipid == BCM43241_CHIP_ID)
-		return true;
-	if (chipid == BCM4329_CHIP_ID)
-		return true;
-	if (chipid == BCM4330_CHIP_ID)
-		return true;
-	if (chipid == BCM4334_CHIP_ID)
-		return true;
-	if (chipid == BCM4335_CHIP_ID)
-		return true;
-	return false;
-}
-
 static void brcmf_sdio_dataworker(struct work_struct *work)
 {
 	struct brcmf_sdio *bus = container_of(work, struct brcmf_sdio,
@@ -3622,11 +3605,6 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
 		goto fail;
 	}
 
-	if (!brcmf_sdbrcm_chipmatch((u16) bus->ci->chip)) {
-		brcmf_err("unsupported chip: 0x%04x\n", bus->ci->chip);
-		goto fail;
-	}
-
 	if (brcmf_sdbrcm_kso_init(bus)) {
 		brcmf_err("error enabling KSO\n");
 		goto fail;
-- 
cgit v1.2.3


From 78b3f1c5be8fdb3c83d21a357b1f8e89f5e18a6b Mon Sep 17 00:00:00 2001
From: Franky Lin <frankyl@broadcom.com>
Date: Tue, 18 Jun 2013 13:29:28 +0200
Subject: brcmfmac: replace brcmf_sdioh_request_buffer with brcmf_sdio_buffrw

Introducing a new SDIO block data access interface function
brcmf_sdio_buffrw. It will act as a unified interface function for any block
data access to WiFi dongle through SDIO interface. This patch enables
the support for single skb transmission.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c   | 58 ++++++++++++++++++----
 .../net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 41 +--------------
 .../net/wireless/brcm80211/brcmfmac/sdio_host.h    |  8 +--
 3 files changed, 53 insertions(+), 54 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 4891e3df2058..32a205e0b063 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -303,6 +303,49 @@ void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		*ret = retval;
 }
 
+/**
+ * brcmf_sdio_buffrw - SDIO interface function for block data access
+ * @sdiodev: brcmfmac sdio device
+ * @fn: SDIO function number
+ * @write: direction flag
+ * @addr: dongle memory address as source/destination
+ * @pkt: skb pointer
+ *
+ * This function takes the respbonsibility as the interface function to MMC
+ * stack for block data access. It assumes that the skb passed down by the
+ * caller has already been padded and aligned.
+ */
+static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
+			     bool write, u32 addr, struct sk_buff *pkt)
+{
+	uint len;
+
+	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
+	if (brcmf_pm_resume_error(sdiodev))
+		return -EIO;
+
+	/* Single skb use the standard mmc interface */
+	if (!pkt->next) {
+		len = pkt->len + 3;
+		len &= (uint)~3;
+
+		if (write)
+			return sdio_memcpy_toio(sdiodev->func[fn], addr,
+						((u8 *)(pkt->data)), len);
+		else if (fn == 1)
+			return sdio_memcpy_fromio(sdiodev->func[fn],
+						  ((u8 *)(pkt->data)), addr,
+						  len);
+		else
+			/* function 2 read is FIFO operation */
+			return sdio_readsb(sdiodev->func[fn],
+					   ((u8 *)(pkt->data)), addr, len);
+	}
+
+	brcmf_err("skb chain is not supported yet.\n");
+	return -EOPNOTSUPP;
+}
+
 static int brcmf_sdcard_recv_prepare(struct brcmf_sdio_dev *sdiodev, uint fn,
 				     uint flags, uint width, u32 *addr)
 {
@@ -355,7 +398,6 @@ int
 brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 		      uint flags, struct sk_buff *pkt)
 {
-	uint incr_fix;
 	uint width;
 	int err = 0;
 
@@ -367,9 +409,7 @@ brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	if (err)
 		goto done;
 
-	incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC;
-	err = brcmf_sdioh_request_buffer(sdiodev, incr_fix, SDIOH_READ,
-					 fn, addr, pkt);
+	err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, pkt);
 
 done:
 	return err;
@@ -424,7 +464,6 @@ int
 brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 		      uint flags, struct sk_buff *pkt)
 {
-	uint incr_fix;
 	uint width;
 	uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
 	int err = 0;
@@ -446,13 +485,11 @@ brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 
 	addr &= SBSDIO_SB_OFT_ADDR_MASK;
 
-	incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC;
 	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
 	if (width == 4)
 		addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
-	err = brcmf_sdioh_request_buffer(sdiodev, incr_fix, SDIOH_WRITE, fn,
-					 addr, pkt);
+	err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, pkt);
 
 done:
 	return err;
@@ -501,9 +538,8 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		skb_put(pkt, dsize);
 		if (write)
 			memcpy(pkt->data, data, dsize);
-		bcmerror = brcmf_sdioh_request_buffer(sdiodev, SDIOH_DATA_INC,
-						      write, SDIO_FUNC_1,
-						      sdaddr, pkt);
+		bcmerror = brcmf_sdio_buffrw(sdiodev, SDIO_FUNC_1, write,
+					     sdaddr, pkt);
 		if (bcmerror) {
 			brcmf_err("membytes transfer failed\n");
 			break;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
index 11400b39cf0b..7a3c5bf33e03 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
@@ -66,7 +66,7 @@ MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
 static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata;
 
 
-static bool
+bool
 brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
 {
 	bool is_err = false;
@@ -76,7 +76,7 @@ brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
 	return is_err;
 }
 
-static void
+void
 brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev, wait_queue_head_t *wq)
 {
 #ifdef CONFIG_PM_SLEEP
@@ -283,43 +283,6 @@ brcmf_sdioh_request_chain(struct brcmf_sdio_dev *sdiodev, uint fix_inc,
 	return err_ret;
 }
 
-/*
- * This function takes a single DMA-able packet.
- */
-int brcmf_sdioh_request_buffer(struct brcmf_sdio_dev *sdiodev,
-			       uint fix_inc, uint write, uint func, uint addr,
-			       struct sk_buff *pkt)
-{
-	int status;
-	uint pkt_len;
-	bool fifo = (fix_inc == SDIOH_DATA_FIX);
-
-	brcmf_dbg(SDIO, "Enter\n");
-
-	if (pkt == NULL)
-		return -EINVAL;
-	pkt_len = pkt->len;
-
-	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
-	if (brcmf_pm_resume_error(sdiodev))
-		return -EIO;
-
-	pkt_len += 3;
-	pkt_len &= (uint)~3;
-
-	status = brcmf_sdioh_request_data(sdiodev, write, fifo, func,
-					   addr, pkt, pkt_len);
-	if (status) {
-		brcmf_err("%s FAILED %p, addr=0x%05x, pkt_len=%d, ERR=0x%08x\n",
-			  write ? "TX" : "RX", pkt, addr, pkt_len, status);
-	} else {
-		brcmf_dbg(SDIO, "%s xfr'd %p, addr=0x%05x, len=%d\n",
-			  write ? "TX" : "RX", pkt, addr, pkt_len);
-	}
-
-	return status;
-}
-
 static int brcmf_sdioh_get_cisaddr(struct brcmf_sdio_dev *sdiodev, u32 regaddr)
 {
 	/* read 24 bits and return valid 17 bit addr */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index 7c1b6332747e..991c1501f7e1 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -274,10 +274,6 @@ brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev,
 
 /* read or write any buffer using cmd53 */
 extern int
-brcmf_sdioh_request_buffer(struct brcmf_sdio_dev *sdiodev,
-			   uint fix_inc, uint rw, uint fnc_num, u32 addr,
-			   struct sk_buff *pkt);
-extern int
 brcmf_sdioh_request_chain(struct brcmf_sdio_dev *sdiodev, uint fix_inc,
 			  uint write, uint func, uint addr,
 			  struct sk_buff_head *pktq);
@@ -291,4 +287,8 @@ extern void brcmf_sdbrcm_disconnect(void *ptr);
 extern void brcmf_sdbrcm_isr(void *arg);
 
 extern void brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick);
+
+extern void brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev,
+				 wait_queue_head_t *wq);
+extern bool brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev);
 #endif				/* _BRCM_SDH_H_ */
-- 
cgit v1.2.3


From 354b75bfdbef02739af39acdbf804549c4626816 Mon Sep 17 00:00:00 2001
From: Franky Lin <frankyl@broadcom.com>
Date: Tue, 18 Jun 2013 13:29:29 +0200
Subject: brcmfmac: add sdio sg list support

Add scatter gather list support for better rx glom performance.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c   | 149 ++++++++++++++++++---
 .../net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c |  73 ----------
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c |  82 +-----------
 .../net/wireless/brcm80211/brcmfmac/sdio_host.h    |   7 -
 4 files changed, 137 insertions(+), 174 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 32a205e0b063..3f8e69c29146 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -22,9 +22,11 @@
 #include <linux/pci_ids.h>
 #include <linux/sched.h>
 #include <linux/completion.h>
+#include <linux/scatterlist.h>
 #include <linux/mmc/sdio.h>
 #include <linux/mmc/sdio_func.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
 #include <linux/platform_data/brcmfmac-sdio.h>
 
 #include <defs.h>
@@ -316,34 +318,138 @@ void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
  * caller has already been padded and aligned.
  */
 static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
-			     bool write, u32 addr, struct sk_buff *pkt)
+			     bool write, u32 addr, struct sk_buff_head *pktlist)
 {
-	uint len;
+	unsigned int req_sz, func_blk_sz, sg_cnt, sg_data_sz, pkt_offset;
+	unsigned int max_blks, max_req_sz;
+	unsigned short max_seg_sz, seg_sz;
+	unsigned char *pkt_data;
+	struct sk_buff *pkt_next = NULL;
+	struct mmc_request mmc_req;
+	struct mmc_command mmc_cmd;
+	struct mmc_data mmc_dat;
+	struct sg_table st;
+	struct scatterlist *sgl;
+	struct mmc_host *host;
+	int ret = 0;
+
+	if (!pktlist->qlen)
+		return -EINVAL;
 
 	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
 	if (brcmf_pm_resume_error(sdiodev))
 		return -EIO;
 
 	/* Single skb use the standard mmc interface */
-	if (!pkt->next) {
-		len = pkt->len + 3;
-		len &= (uint)~3;
+	if (pktlist->qlen == 1) {
+		pkt_next = pktlist->next;
+		req_sz = pkt_next->len + 3;
+		req_sz &= (uint)~3;
 
 		if (write)
 			return sdio_memcpy_toio(sdiodev->func[fn], addr,
-						((u8 *)(pkt->data)), len);
+						((u8 *)(pkt_next->data)),
+						req_sz);
 		else if (fn == 1)
 			return sdio_memcpy_fromio(sdiodev->func[fn],
-						  ((u8 *)(pkt->data)), addr,
-						  len);
+						  ((u8 *)(pkt_next->data)),
+						  addr, req_sz);
 		else
 			/* function 2 read is FIFO operation */
 			return sdio_readsb(sdiodev->func[fn],
-					   ((u8 *)(pkt->data)), addr, len);
+					   ((u8 *)(pkt_next->data)), addr,
+					   req_sz);
 	}
 
-	brcmf_err("skb chain is not supported yet.\n");
-	return -EOPNOTSUPP;
+	host = sdiodev->func[fn]->card->host;
+	func_blk_sz = sdiodev->func[fn]->cur_blksize;
+	/* Blocks per command is limited by host count, host transfer
+	 * size and the maximum for IO_RW_EXTENDED of 511 blocks.
+	 */
+	max_blks = min_t(unsigned int, host->max_blk_count, 511u);
+	max_req_sz = min_t(unsigned int, host->max_req_size,
+			   max_blks * func_blk_sz);
+	max_seg_sz = min_t(unsigned short, host->max_segs, SG_MAX_SINGLE_ALLOC);
+	max_seg_sz = min_t(unsigned short, max_seg_sz, pktlist->qlen);
+	seg_sz = pktlist->qlen;
+	pkt_offset = 0;
+	pkt_next = pktlist->next;
+
+	if (sg_alloc_table(&st, max_seg_sz, GFP_KERNEL))
+		return -ENOMEM;
+
+	while (seg_sz) {
+		req_sz = 0;
+		sg_cnt = 0;
+		memset(&mmc_req, 0, sizeof(struct mmc_request));
+		memset(&mmc_cmd, 0, sizeof(struct mmc_command));
+		memset(&mmc_dat, 0, sizeof(struct mmc_data));
+		sgl = st.sgl;
+		/* prep sg table */
+		while (pkt_next != (struct sk_buff *)pktlist) {
+			pkt_data = pkt_next->data + pkt_offset;
+			sg_data_sz = pkt_next->len - pkt_offset;
+			if (sg_data_sz > host->max_seg_size)
+				sg_data_sz = host->max_seg_size;
+			if (sg_data_sz > max_req_sz - req_sz)
+				sg_data_sz = max_req_sz - req_sz;
+
+			sg_set_buf(sgl, pkt_data, sg_data_sz);
+
+			sg_cnt++;
+			sgl = sg_next(sgl);
+			req_sz += sg_data_sz;
+			pkt_offset += sg_data_sz;
+			if (pkt_offset == pkt_next->len) {
+				pkt_offset = 0;
+				pkt_next = pkt_next->next;
+			}
+
+			if (req_sz >= max_req_sz || sg_cnt >= max_seg_sz)
+				break;
+		}
+		seg_sz -= sg_cnt;
+
+		if (req_sz % func_blk_sz != 0) {
+			brcmf_err("sg request length %u is not %u aligned\n",
+				  req_sz, func_blk_sz);
+			sg_free_table(&st);
+			return -ENOTBLK;
+		}
+		mmc_dat.sg = st.sgl;
+		mmc_dat.sg_len = sg_cnt;
+		mmc_dat.blksz = func_blk_sz;
+		mmc_dat.blocks = req_sz / func_blk_sz;
+		mmc_dat.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
+		mmc_cmd.opcode = SD_IO_RW_EXTENDED;
+		mmc_cmd.arg = write ? 1<<31 : 0;	/* write flag  */
+		mmc_cmd.arg |= (fn & 0x7) << 28;	/* SDIO func num */
+		mmc_cmd.arg |= 1<<27;			/* block mode */
+		/* incrementing addr for function 1 */
+		mmc_cmd.arg |= (fn == 1) ? 1<<26 : 0;
+		mmc_cmd.arg |= (addr & 0x1FFFF) << 9;	/* address */
+		mmc_cmd.arg |= mmc_dat.blocks & 0x1FF;	/* block count */
+		mmc_cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
+		mmc_req.cmd = &mmc_cmd;
+		mmc_req.data = &mmc_dat;
+		if (fn == 1)
+			addr += req_sz;
+
+		mmc_set_data_timeout(&mmc_dat, sdiodev->func[fn]->card);
+		mmc_wait_for_req(host, &mmc_req);
+
+		ret = mmc_cmd.error ? mmc_cmd.error : mmc_dat.error;
+		if (ret != 0) {
+			brcmf_err("CMD53 sg block %s failed %d\n",
+				  write ? "write" : "read", ret);
+			ret = -EIO;
+			break;
+		}
+	}
+
+	sg_free_table(&st);
+
+	return ret;
 }
 
 static int brcmf_sdcard_recv_prepare(struct brcmf_sdio_dev *sdiodev, uint fn,
@@ -400,6 +506,7 @@ brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 {
 	uint width;
 	int err = 0;
+	struct sk_buff_head pkt_list;
 
 	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
 		  fn, addr, pkt->len);
@@ -409,7 +516,10 @@ brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	if (err)
 		goto done;
 
-	err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, pkt);
+	skb_queue_head_init(&pkt_list);
+	skb_queue_tail(&pkt_list, pkt);
+	err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, &pkt_list);
+	skb_dequeue_tail(&pkt_list);
 
 done:
 	return err;
@@ -431,8 +541,7 @@ int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 		goto done;
 
 	incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC;
-	err = brcmf_sdioh_request_chain(sdiodev, incr_fix, SDIOH_READ, fn, addr,
-					pktq);
+	err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, pktq);
 
 done:
 	return err;
@@ -467,6 +576,7 @@ brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	uint width;
 	uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
 	int err = 0;
+	struct sk_buff_head pkt_list;
 
 	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
 		  fn, addr, pkt->len);
@@ -489,7 +599,10 @@ brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	if (width == 4)
 		addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
-	err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, pkt);
+	skb_queue_head_init(&pkt_list);
+	skb_queue_tail(&pkt_list, pkt);
+	err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, &pkt_list);
+	skb_dequeue_tail(&pkt_list);
 
 done:
 	return err;
@@ -503,6 +616,7 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	struct sk_buff *pkt;
 	u32 sdaddr;
 	uint dsize;
+	struct sk_buff_head pkt_list;
 
 	dsize = min_t(uint, SBSDIO_SB_OFT_ADDR_LIMIT, size);
 	pkt = dev_alloc_skb(dsize);
@@ -511,6 +625,7 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		return -EIO;
 	}
 	pkt->priority = 0;
+	skb_queue_head_init(&pkt_list);
 
 	/* Determine initial transfer parameters */
 	sdaddr = address & SBSDIO_SB_OFT_ADDR_MASK;
@@ -538,8 +653,10 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		skb_put(pkt, dsize);
 		if (write)
 			memcpy(pkt->data, data, dsize);
+		skb_queue_tail(&pkt_list, pkt);
 		bcmerror = brcmf_sdio_buffrw(sdiodev, SDIO_FUNC_1, write,
-					     sdaddr, pkt);
+					     sdaddr, &pkt_list);
+		skb_dequeue_tail(&pkt_list);
 		if (bcmerror) {
 			brcmf_err("membytes transfer failed\n");
 			break;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
index 7a3c5bf33e03..289e386f01f6 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
@@ -211,78 +211,6 @@ int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev,
 	return err_ret;
 }
 
-/* precondition: host controller is claimed */
-static int
-brcmf_sdioh_request_data(struct brcmf_sdio_dev *sdiodev, uint write, bool fifo,
-			 uint func, uint addr, struct sk_buff *pkt, uint pktlen)
-{
-	int err_ret = 0;
-
-	if ((write) && (!fifo)) {
-		err_ret = sdio_memcpy_toio(sdiodev->func[func], addr,
-					   ((u8 *) (pkt->data)), pktlen);
-	} else if (write) {
-		err_ret = sdio_memcpy_toio(sdiodev->func[func], addr,
-					   ((u8 *) (pkt->data)), pktlen);
-	} else if (fifo) {
-		err_ret = sdio_readsb(sdiodev->func[func],
-				      ((u8 *) (pkt->data)), addr, pktlen);
-	} else {
-		err_ret = sdio_memcpy_fromio(sdiodev->func[func],
-					     ((u8 *) (pkt->data)),
-					     addr, pktlen);
-	}
-
-	return err_ret;
-}
-
-/*
- * This function takes a queue of packets. The packets on the queue
- * are assumed to be properly aligned by the caller.
- */
-int
-brcmf_sdioh_request_chain(struct brcmf_sdio_dev *sdiodev, uint fix_inc,
-			  uint write, uint func, uint addr,
-			  struct sk_buff_head *pktq)
-{
-	bool fifo = (fix_inc == SDIOH_DATA_FIX);
-	u32 SGCount = 0;
-	int err_ret = 0;
-
-	struct sk_buff *pkt;
-
-	brcmf_dbg(SDIO, "Enter\n");
-
-	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_chain_wait);
-	if (brcmf_pm_resume_error(sdiodev))
-		return -EIO;
-
-	skb_queue_walk(pktq, pkt) {
-		uint pkt_len = pkt->len;
-		pkt_len += 3;
-		pkt_len &= 0xFFFFFFFC;
-
-		err_ret = brcmf_sdioh_request_data(sdiodev, write, fifo, func,
-						   addr, pkt, pkt_len);
-		if (err_ret) {
-			brcmf_err("%s FAILED %p[%d], addr=0x%05x, pkt_len=%d, ERR=0x%08x\n",
-				  write ? "TX" : "RX", pkt, SGCount, addr,
-				  pkt_len, err_ret);
-		} else {
-			brcmf_dbg(SDIO, "%s xfr'd %p[%d], addr=0x%05x, len=%d\n",
-				  write ? "TX" : "RX", pkt, SGCount, addr,
-				  pkt_len);
-		}
-		if (!fifo)
-			addr += pkt_len;
-
-		SGCount++;
-	}
-
-	brcmf_dbg(SDIO, "Exit\n");
-	return err_ret;
-}
-
 static int brcmf_sdioh_get_cisaddr(struct brcmf_sdio_dev *sdiodev, u32 regaddr)
 {
 	/* read 24 bits and return valid 17 bit addr */
@@ -431,7 +359,6 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 	atomic_set(&sdiodev->suspend, false);
 	init_waitqueue_head(&sdiodev->request_byte_wait);
 	init_waitqueue_head(&sdiodev->request_word_wait);
-	init_waitqueue_head(&sdiodev->request_chain_wait);
 	init_waitqueue_head(&sdiodev->request_buffer_wait);
 
 	brcmf_dbg(SDIO, "F2 found, calling brcmf_sdio_probe...\n");
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index cb22f2f51453..264111968320 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -448,8 +448,6 @@ struct brcmf_sdio {
 	uint rxblen;		/* Allocated length of rxbuf */
 	u8 *rxctl;		/* Aligned pointer into rxbuf */
 	u8 *rxctl_orig;		/* pointer for freeing rxctl */
-	u8 *databuf;		/* Buffer for receiving big glom packet */
-	u8 *dataptr;		/* Aligned pointer into databuf */
 	uint rxlen;		/* Length of valid data in buffer */
 	spinlock_t rxctl_lock;	/* protection lock for ctrl frame resources */
 
@@ -473,8 +471,6 @@ struct brcmf_sdio {
 	s32 idletime;		/* Control for activity timeout */
 	s32 idlecount;	/* Activity timeout counter */
 	s32 idleclock;	/* How to set bus driver when idle */
-	s32 sd_rxchain;
-	bool use_rxchain;	/* If brcmf should use PKT chains */
 	bool rxflow_mode;	/* Rx flow control mode */
 	bool rxflow;		/* Is rx flow control on */
 	bool alp_only;		/* Don't use HT clock (ALP only) */
@@ -1025,29 +1021,6 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 		bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 }
 
-/* copy a buffer into a pkt buffer chain */
-static uint brcmf_sdbrcm_glom_from_buf(struct brcmf_sdio *bus, uint len)
-{
-	uint n, ret = 0;
-	struct sk_buff *p;
-	u8 *buf;
-
-	buf = bus->dataptr;
-
-	/* copy the data */
-	skb_queue_walk(&bus->glom, p) {
-		n = min_t(uint, p->len, len);
-		memcpy(p->data, buf, n);
-		buf += n;
-		len -= n;
-		ret += n;
-		if (!len)
-			break;
-	}
-
-	return ret;
-}
-
 /* return total length of buffer chain */
 static uint brcmf_sdbrcm_glom_len(struct brcmf_sdio *bus)
 {
@@ -1201,8 +1174,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 	int errcode;
 	u8 doff, sfdoff;
 
-	bool usechain = bus->use_rxchain;
-
 	struct brcmf_sdio_read rd_new;
 
 	/* If packets, issue read(s) and send up packet chain */
@@ -1237,7 +1208,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 			if (sublen % BRCMF_SDALIGN) {
 				brcmf_err("sublen %d not multiple of %d\n",
 					  sublen, BRCMF_SDALIGN);
-				usechain = false;
 			}
 			totlen += sublen;
 
@@ -1304,27 +1274,9 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 		 * packet and and copy into the chain.
 		 */
 		sdio_claim_host(bus->sdiodev->func[1]);
-		if (usechain) {
-			errcode = brcmf_sdcard_recv_chain(bus->sdiodev,
-					bus->sdiodev->sbwad,
-					SDIO_FUNC_2, F2SYNC, &bus->glom);
-		} else if (bus->dataptr) {
-			errcode = brcmf_sdcard_recv_buf(bus->sdiodev,
-					bus->sdiodev->sbwad,
-					SDIO_FUNC_2, F2SYNC,
-					bus->dataptr, dlen);
-			sublen = (u16) brcmf_sdbrcm_glom_from_buf(bus, dlen);
-			if (sublen != dlen) {
-				brcmf_err("FAILED TO COPY, dlen %d sublen %d\n",
-					  dlen, sublen);
-				errcode = -1;
-			}
-			pnext = NULL;
-		} else {
-			brcmf_err("COULDN'T ALLOC %d-BYTE GLOM, FORCE FAILURE\n",
-				  dlen);
-			errcode = -1;
-		}
+		errcode = brcmf_sdcard_recv_chain(bus->sdiodev,
+				bus->sdiodev->sbwad,
+				SDIO_FUNC_2, F2SYNC, &bus->glom);
 		sdio_release_host(bus->sdiodev->func[1]);
 		bus->sdcnt.f2rxdata++;
 
@@ -3527,9 +3479,6 @@ static void brcmf_sdbrcm_release_malloc(struct brcmf_sdio *bus)
 	kfree(bus->rxbuf);
 	bus->rxctl = bus->rxbuf = NULL;
 	bus->rxlen = 0;
-
-	kfree(bus->databuf);
-	bus->databuf = NULL;
 }
 
 static bool brcmf_sdbrcm_probe_malloc(struct brcmf_sdio *bus)
@@ -3542,29 +3491,10 @@ static bool brcmf_sdbrcm_probe_malloc(struct brcmf_sdio *bus)
 			    ALIGNMENT) + BRCMF_SDALIGN;
 		bus->rxbuf = kmalloc(bus->rxblen, GFP_ATOMIC);
 		if (!(bus->rxbuf))
-			goto fail;
-	}
-
-	/* Allocate buffer to receive glomed packet */
-	bus->databuf = kmalloc(MAX_DATA_BUF, GFP_ATOMIC);
-	if (!(bus->databuf)) {
-		/* release rxbuf which was already located as above */
-		if (!bus->rxblen)
-			kfree(bus->rxbuf);
-		goto fail;
+			return false;
 	}
 
-	/* Align the buffer */
-	if ((unsigned long)bus->databuf % BRCMF_SDALIGN)
-		bus->dataptr = bus->databuf + (BRCMF_SDALIGN -
-			       ((unsigned long)bus->databuf % BRCMF_SDALIGN));
-	else
-		bus->dataptr = bus->databuf;
-
 	return true;
-
-fail:
-	return false;
 }
 
 static bool
@@ -3703,10 +3633,6 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus)
 	bus->blocksize = bus->sdiodev->func[2]->cur_blksize;
 	bus->roundup = min(max_roundup, bus->blocksize);
 
-	/* bus module does not support packet chaining */
-	bus->use_rxchain = false;
-	bus->sd_rxchain = false;
-
 	/* SR state */
 	bus->sleeping = false;
 	bus->sr_enabled = false;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index 991c1501f7e1..793df66fe0bf 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -170,7 +170,6 @@ struct brcmf_sdio_dev {
 	atomic_t suspend;		/* suspend flag */
 	wait_queue_head_t request_byte_wait;
 	wait_queue_head_t request_word_wait;
-	wait_queue_head_t request_chain_wait;
 	wait_queue_head_t request_buffer_wait;
 	struct device *dev;
 	struct brcmf_bus *bus_if;
@@ -272,12 +271,6 @@ brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev,
 			 uint rw, uint fnc, uint addr,
 			 u32 *word, uint nbyte);
 
-/* read or write any buffer using cmd53 */
-extern int
-brcmf_sdioh_request_chain(struct brcmf_sdio_dev *sdiodev, uint fix_inc,
-			  uint write, uint func, uint addr,
-			  struct sk_buff_head *pktq);
-
 /* Watchdog timer interface for pm ops */
 extern void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev,
 				    bool enable);
-- 
cgit v1.2.3


From 10d0b9030a3f86e1e26c710c7580524d7787d688 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 18 Jun 2013 13:25:05 -0500
Subject: rtlwifi: rtl8192cu: Fix duplicate if test

A typo causes routine rtl92cu_phy_rf6052_set_cck_txpower() to test the
same condition twice. The problem was found using cppcheck-1.49, and the
proper fix was verified against the pre-mac80211 version of the code.

This patch was originally included as commit 1288aa4, but was accidentally
reverted in a later patch.

Reported-by: David Binderman <dcb314@hotmail.com> [original report]
Reported-by: Andrea Morello <andrea.merello@gmail.com> [report of accidental reversion]
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@vger.kernel.org>  [back to 2.6.39]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192cu/rf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c b/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
index 953f1a0f8532..2119313a737b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
@@ -104,7 +104,7 @@ void rtl92cu_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
 			tx_agc[RF90_PATH_A] = 0x10101010;
 			tx_agc[RF90_PATH_B] = 0x10101010;
 		} else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
-			   TXHIGHPWRLEVEL_LEVEL1) {
+			   TXHIGHPWRLEVEL_LEVEL2) {
 			tx_agc[RF90_PATH_A] = 0x00000000;
 			tx_agc[RF90_PATH_B] = 0x00000000;
 		} else{
-- 
cgit v1.2.3


From f2bbb07729f04bd8efa3f3285f19ba0609e42017 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue, 18 Jun 2013 16:36:56 -0700
Subject: mwifiex: code rearrangement for better readability

Use negative check (if(!bss_desc)) and return failure
instead of failing a NULL check later in
mwifiex_check_network_compatibility() routine.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/sta_ioctl.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 23aa910bc5d0..15b5457fa4e5 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -255,25 +255,24 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
 	}
 
 	if (priv->bss_mode == NL80211_IFTYPE_STATION) {
+		u8 config_bands;
+
 		/* Infra mode */
 		ret = mwifiex_deauthenticate(priv, NULL);
 		if (ret)
 			goto done;
 
-		if (bss_desc) {
-			u8 config_bands = 0;
+		if (!bss_desc)
+			return -1;
 
-			if (mwifiex_band_to_radio_type((u8) bss_desc->bss_band)
-			    == HostCmd_SCAN_RADIO_TYPE_BG)
-				config_bands = BAND_B | BAND_G | BAND_GN |
-					       BAND_GAC;
-			else
-				config_bands = BAND_A | BAND_AN | BAND_AAC;
+		if (mwifiex_band_to_radio_type(bss_desc->bss_band) ==
+						HostCmd_SCAN_RADIO_TYPE_BG)
+			config_bands = BAND_B | BAND_G | BAND_GN | BAND_GAC;
+		else
+			config_bands = BAND_A | BAND_AN | BAND_AAC;
 
-			if (!((config_bands | adapter->fw_bands) &
-			      ~adapter->fw_bands))
-				adapter->config_bands = config_bands;
-		}
+		if (!((config_bands | adapter->fw_bands) & ~adapter->fw_bands))
+			adapter->config_bands = config_bands;
 
 		ret = mwifiex_check_network_compatibility(priv, bss_desc);
 		if (ret)
-- 
cgit v1.2.3


From 86a9c4a28b2c1a367d340db53570ebea02f33fca Mon Sep 17 00:00:00 2001
From: Antonio Quartulli <antonio@open-mesh.com>
Date: Wed, 19 Jun 2013 13:35:31 +0200
Subject: brcm80211: fix null pointer access

Do not unconditionally access the chan variable in
brcmf_cfg80211_mgmt_tx() as it may be NULL.
Use freq instead.

Introduced by c2ff8cad64233b539c71a27e2a6e324001143ef0
("brcm80211: make mgmt_tx in brcmfmac accept a NULL channel")

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 71f4db5fde99..277b37ae7126 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -4050,8 +4050,7 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 		       le16_to_cpu(action_frame->len));
 
 		brcmf_dbg(TRACE, "Action frame, cookie=%lld, len=%d, freq=%d\n",
-			  *cookie, le16_to_cpu(action_frame->len),
-			  chan->center_freq);
+			  *cookie, le16_to_cpu(action_frame->len), freq);
 
 		ack = brcmf_p2p_send_action_frame(cfg, cfg_to_ndev(cfg),
 						  af_params);
-- 
cgit v1.2.3


From 2a7305c88d245f104c3d6bd3babafb029fd07477 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Wed, 19 Jun 2013 08:49:05 -0700
Subject: mwifiex: add basic 11h support for station

This patch adds code to parse requested AP's 11h capabilities
and add 11h information in association request.

Also, deauth is sent to the AP after receiving channel switch
announcement event from firmware. This happens when AP advertises
WLAN_EID_CHANNEL_SWITCH IE in it's beacon.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/11h.c       | 101 +++++++++++++++++++++++++++++++
 drivers/net/wireless/mwifiex/Makefile    |   1 +
 drivers/net/wireless/mwifiex/fw.h        |  14 +++++
 drivers/net/wireless/mwifiex/join.c      |   2 +
 drivers/net/wireless/mwifiex/main.h      |   7 +++
 drivers/net/wireless/mwifiex/scan.c      |  19 ++++++
 drivers/net/wireless/mwifiex/sta_event.c |   8 +++
 drivers/net/wireless/mwifiex/sta_ioctl.c |   3 +
 8 files changed, 155 insertions(+)
 create mode 100644 drivers/net/wireless/mwifiex/11h.c

(limited to 'drivers')

diff --git a/drivers/net/wireless/mwifiex/11h.c b/drivers/net/wireless/mwifiex/11h.c
new file mode 100644
index 000000000000..8d683070bdb3
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/11h.c
@@ -0,0 +1,101 @@
+/*
+ * Marvell Wireless LAN device driver: 802.11h
+ *
+ * Copyright (C) 2013, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "main.h"
+#include "fw.h"
+
+
+/* This function appends 11h info to a buffer while joining an
+ * infrastructure BSS
+ */
+static void
+mwifiex_11h_process_infra_join(struct mwifiex_private *priv, u8 **buffer,
+			       struct mwifiex_bssdescriptor *bss_desc)
+{
+	struct mwifiex_ie_types_header *ie_header;
+	struct mwifiex_ie_types_pwr_capability *cap;
+	struct mwifiex_ie_types_local_pwr_constraint *constraint;
+	struct ieee80211_supported_band *sband;
+	u8 radio_type;
+	int i;
+
+	if (!buffer || !(*buffer))
+		return;
+
+	radio_type = mwifiex_band_to_radio_type((u8) bss_desc->bss_band);
+	sband = priv->wdev->wiphy->bands[radio_type];
+
+	cap = (struct mwifiex_ie_types_pwr_capability *)*buffer;
+	cap->header.type = cpu_to_le16(WLAN_EID_PWR_CAPABILITY);
+	cap->header.len = cpu_to_le16(2);
+	cap->min_pwr = 0;
+	cap->max_pwr = 0;
+	*buffer += sizeof(*cap);
+
+	constraint = (struct mwifiex_ie_types_local_pwr_constraint *)*buffer;
+	constraint->header.type = cpu_to_le16(WLAN_EID_PWR_CONSTRAINT);
+	constraint->header.len = cpu_to_le16(2);
+	constraint->chan = bss_desc->channel;
+	constraint->constraint = bss_desc->local_constraint;
+	*buffer += sizeof(*constraint);
+
+	ie_header = (struct mwifiex_ie_types_header *)*buffer;
+	ie_header->type = cpu_to_le16(TLV_TYPE_PASSTHROUGH);
+	ie_header->len  = cpu_to_le16(2 * sband->n_channels + 2);
+	*buffer += sizeof(*ie_header);
+	*(*buffer)++ = WLAN_EID_SUPPORTED_CHANNELS;
+	*(*buffer)++ = 2 * sband->n_channels;
+	for (i = 0; i < sband->n_channels; i++) {
+		*(*buffer)++ = ieee80211_frequency_to_channel(
+					sband->channels[i].center_freq);
+		*(*buffer)++ = 1; /* one channel in the subband */
+	}
+}
+
+/* Enable or disable the 11h extensions in the firmware */
+static int mwifiex_11h_activate(struct mwifiex_private *priv, bool flag)
+{
+	u32 enable = flag;
+
+	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
+				     HostCmd_ACT_GEN_SET, DOT11H_I, &enable);
+}
+
+/* This functions processes TLV buffer for a pending BSS Join command.
+ *
+ * Activate 11h functionality in the firmware if the spectrum management
+ * capability bit is found in the network we are joining. Also, necessary
+ * TLVs are set based on requested network's 11h capability.
+ */
+void mwifiex_11h_process_join(struct mwifiex_private *priv, u8 **buffer,
+			      struct mwifiex_bssdescriptor *bss_desc)
+{
+	if (bss_desc->sensed_11h) {
+		/* Activate 11h functions in firmware, turns on capability
+		 * bit
+		 */
+		mwifiex_11h_activate(priv, true);
+		bss_desc->cap_info_bitmap |= WLAN_CAPABILITY_SPECTRUM_MGMT;
+		mwifiex_11h_process_infra_join(priv, buffer, bss_desc);
+	} else {
+		/* Deactivate 11h functions in the firmware */
+		mwifiex_11h_activate(priv, false);
+		bss_desc->cap_info_bitmap &= ~WLAN_CAPABILITY_SPECTRUM_MGMT;
+	}
+}
diff --git a/drivers/net/wireless/mwifiex/Makefile b/drivers/net/wireless/mwifiex/Makefile
index ecf28464367f..a42a506fd32b 100644
--- a/drivers/net/wireless/mwifiex/Makefile
+++ b/drivers/net/wireless/mwifiex/Makefile
@@ -40,6 +40,7 @@ mwifiex-y += sta_rx.o
 mwifiex-y += uap_txrx.o
 mwifiex-y += cfg80211.o
 mwifiex-y += ethtool.o
+mwifiex-y += 11h.o
 mwifiex-$(CONFIG_DEBUG_FS) += debugfs.o
 obj-$(CONFIG_MWIFIEX) += mwifiex.o
 
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index d6ada7354c14..b6fbbf64cf96 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -438,6 +438,7 @@ enum P2P_MODES {
 #define EVENT_BW_CHANGE                 0x00000048
 #define EVENT_UAP_MIC_COUNTERMEASURES   0x0000004c
 #define EVENT_HOSTWAKE_STAIE		0x0000004d
+#define EVENT_CHANNEL_SWITCH_ANN        0x00000050
 #define EVENT_REMAIN_ON_CHAN_EXPIRED    0x0000005f
 
 #define EVENT_ID_MASK                   0xffff
@@ -975,6 +976,7 @@ enum SNMP_MIB_INDEX {
 	LONG_RETRY_LIM_I = 7,
 	FRAG_THRESH_I = 8,
 	DOT11D_I = 9,
+	DOT11H_I = 10,
 };
 
 #define MAX_SNMP_BUF_SIZE   128
@@ -1206,6 +1208,18 @@ struct host_cmd_ds_sta_deauth {
 	__le16 reason;
 } __packed;
 
+struct mwifiex_ie_types_pwr_capability {
+	struct mwifiex_ie_types_header header;
+	s8 min_pwr;
+	s8 max_pwr;
+};
+
+struct mwifiex_ie_types_local_pwr_constraint {
+	struct mwifiex_ie_types_header header;
+	u8 chan;
+	u8 constraint;
+};
+
 struct mwifiex_ie_types_wmm_param_set {
 	struct mwifiex_ie_types_header header;
 	u8 wmm_ie[1];
diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
index 122175af18c6..1c8a771e8e81 100644
--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -534,6 +534,8 @@ int mwifiex_cmd_802_11_associate(struct mwifiex_private *priv,
 
 	mwifiex_cmd_append_tsf_tlv(priv, &pos, bss_desc);
 
+	mwifiex_11h_process_join(priv, &pos, bss_desc);
+
 	cmd->size = cpu_to_le16((u16) (pos - (u8 *) assoc) + S_DS_GEN);
 
 	/* Set the Capability info at last */
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 0832c2437daf..95a6f5269c6c 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -309,6 +309,9 @@ struct mwifiex_bssdescriptor {
 	u16 wapi_offset;
 	u8 *beacon_buf;
 	u32 beacon_buf_size;
+	u8 sensed_11h;
+	u8 local_constraint;
+	u8 chan_sw_ie_present;
 };
 
 struct mwifiex_current_bss_params {
@@ -1119,6 +1122,10 @@ u8 *mwifiex_11d_code_2_region(u8 code);
 void mwifiex_uap_del_sta_data(struct mwifiex_private *priv,
 			      struct mwifiex_sta_node *node);
 
+void mwifiex_11h_process_join(struct mwifiex_private *priv, u8 **buffer,
+			      struct mwifiex_bssdescriptor *bss_desc);
+int mwifiex_11h_handle_event_chanswann(struct mwifiex_private *priv);
+
 extern const struct ethtool_ops mwifiex_ethtool_ops;
 
 #ifdef CONFIG_DEBUG_FS
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 801b6b728379..284d68bf6acc 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -391,6 +391,12 @@ mwifiex_is_network_compatible(struct mwifiex_private *priv,
 		return 0;
 	}
 
+	if (bss_desc->chan_sw_ie_present) {
+		dev_err(adapter->dev,
+			"Don't connect to AP with WLAN_EID_CHANNEL_SWITCH\n");
+		return -1;
+	}
+
 	if (mwifiex_is_bss_wapi(priv, bss_desc)) {
 		dev_dbg(adapter->dev, "info: return success for WAPI AP\n");
 		return 0;
@@ -1169,6 +1175,19 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			bss_entry->erp_flags = *(current_ptr + 2);
 			break;
 
+		case WLAN_EID_PWR_CONSTRAINT:
+			bss_entry->local_constraint = *(current_ptr + 2);
+			bss_entry->sensed_11h = true;
+			break;
+
+		case WLAN_EID_CHANNEL_SWITCH:
+			bss_entry->chan_sw_ie_present = true;
+		case WLAN_EID_PWR_CAPABILITY:
+		case WLAN_EID_TPC_REPORT:
+		case WLAN_EID_QUIET:
+			bss_entry->sensed_11h = true;
+		    break;
+
 		case WLAN_EID_EXT_SUPP_RATES:
 			/*
 			 * Only process extended supported rate
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index 41aafc7454ed..d28c92005cce 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -427,6 +427,14 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
 
 		break;
 
+	case EVENT_CHANNEL_SWITCH_ANN:
+		dev_dbg(adapter->dev, "event: Channel Switch Announcement\n");
+		ret = mwifiex_send_cmd_async(priv,
+			HostCmd_CMD_802_11_DEAUTHENTICATE,
+			HostCmd_ACT_GEN_SET, 0,
+			priv->curr_bss_params.bss_descriptor.mac_address);
+		break;
+
 	default:
 		dev_dbg(adapter->dev, "event: unknown event id: %#x\n",
 			eventcause);
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 15b5457fa4e5..498add76a46d 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -178,6 +178,9 @@ int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv,
 	 */
 	bss_desc->disable_11ac = true;
 
+	if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_SPECTRUM_MGMT)
+		bss_desc->sensed_11h = true;
+
 	return mwifiex_update_bss_desc_with_ie(priv->adapter, bss_desc);
 }
 
-- 
cgit v1.2.3


From b887664d882ee4f6a67e0bf05e5f141d32fcc067 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue, 18 Jun 2013 16:36:58 -0700
Subject: mwifiex: channel switch handling for station

After receiving channel switch announcement from AP, scan and
association on that channel is blocked for DFS_CHAN_MOVE_TIME
(10 seconds). Hence station will be able to connect to the AP,
once it is moved to new channel.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/fw.h        |  2 ++
 drivers/net/wireless/mwifiex/init.c      |  3 +++
 drivers/net/wireless/mwifiex/main.h      | 20 ++++++++++++++++++++
 drivers/net/wireless/mwifiex/scan.c      | 18 ++++++++++++++++++
 drivers/net/wireless/mwifiex/sta_event.c |  3 +++
 drivers/net/wireless/mwifiex/sta_ioctl.c |  8 ++++++++
 6 files changed, 54 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index b6fbbf64cf96..1b45aa533300 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -245,6 +245,8 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define HT_BW_20    0
 #define HT_BW_40    1
 
+#define DFS_CHAN_MOVE_TIME      10000
+
 #define HostCmd_CMD_GET_HW_SPEC                       0x0003
 #define HostCmd_CMD_802_11_SCAN                       0x0006
 #define HostCmd_CMD_802_11_GET_LOG                    0x000b
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 2fe31dcaa6ef..caaf4bd56b30 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -133,6 +133,9 @@ int mwifiex_init_priv(struct mwifiex_private *priv)
 
 	priv->scan_block = false;
 
+	priv->csa_chan = 0;
+	priv->csa_expire_time = 0;
+
 	return mwifiex_add_bss_prio_tbl(priv);
 }
 
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 95a6f5269c6c..3da73d36acdf 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -513,6 +513,8 @@ struct mwifiex_private {
 	u32 mgmt_frame_mask;
 	struct mwifiex_roc_cfg roc_cfg;
 	bool scan_aborting;
+	u8 csa_chan;
+	unsigned long csa_expire_time;
 };
 
 enum mwifiex_ba_status {
@@ -1021,6 +1023,24 @@ static inline bool mwifiex_is_skb_mgmt_frame(struct sk_buff *skb)
 	return (*(u32 *)skb->data == PKT_TYPE_MGMT);
 }
 
+/* This function retrieves channel closed for operation by Channel
+ * Switch Announcement.
+ */
+static inline u8
+mwifiex_11h_get_csa_closed_channel(struct mwifiex_private *priv)
+{
+	if (!priv->csa_chan)
+		return 0;
+
+	/* Clear csa channel, if DFS channel move time has passed */
+	if (jiffies > priv->csa_expire_time) {
+		priv->csa_chan = 0;
+		priv->csa_expire_time = 0;
+	}
+
+	return priv->csa_chan;
+}
+
 int mwifiex_init_shutdown_fw(struct mwifiex_private *priv,
 			     u32 func_init_shutdown);
 int mwifiex_add_card(void *, struct semaphore *, struct mwifiex_if_ops *, u8);
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 284d68bf6acc..c447d9bd1aa9 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -575,6 +575,9 @@ mwifiex_scan_channel_list(struct mwifiex_private *priv,
 		return -1;
 	}
 
+	/* Check csa channel expiry before preparing scan list */
+	mwifiex_11h_get_csa_closed_channel(priv);
+
 	chan_tlv_out->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);
 
 	/* Set the temp channel struct pointer to the start of the desired
@@ -604,6 +607,11 @@ mwifiex_scan_channel_list(struct mwifiex_private *priv,
 		while (tlv_idx < max_chan_per_scan &&
 		       tmp_chan_list->chan_number && !done_early) {
 
+			if (tmp_chan_list->chan_number == priv->csa_chan) {
+				tmp_chan_list++;
+				continue;
+			}
+
 			dev_dbg(priv->adapter->dev,
 				"info: Scan: Chan(%3d), Radio(%d),"
 				" Mode(%d, %d), Dur(%d)\n",
@@ -1594,6 +1602,9 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 		goto check_next_scan;
 	}
 
+	/* Check csa channel expiry before parsing scan response */
+	mwifiex_11h_get_csa_closed_channel(priv);
+
 	bytes_left = le16_to_cpu(scan_rsp->bss_descript_size);
 	dev_dbg(adapter->dev, "info: SCAN_RESP: bss_descript_size %d\n",
 		bytes_left);
@@ -1746,6 +1757,13 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 			struct ieee80211_channel *chan;
 			u8 band;
 
+			/* Skip entry if on csa closed channel */
+			if (channel == priv->csa_chan) {
+				dev_dbg(adapter->dev,
+					"Dropping entry on csa closed channel\n");
+				continue;
+			}
+
 			band = BAND_G;
 			if (chan_band_tlv) {
 				chan_band =
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index d28c92005cce..ea265ec0e522 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -429,6 +429,9 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
 
 	case EVENT_CHANNEL_SWITCH_ANN:
 		dev_dbg(adapter->dev, "event: Channel Switch Announcement\n");
+		priv->csa_expire_time =
+				jiffies + msecs_to_jiffies(DFS_CHAN_MOVE_TIME);
+		priv->csa_chan = priv->curr_bss_params.bss_descriptor.channel;
 		ret = mwifiex_send_cmd_async(priv,
 			HostCmd_CMD_802_11_DEAUTHENTICATE,
 			HostCmd_ACT_GEN_SET, 0,
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 498add76a46d..206c3e038072 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -281,6 +281,14 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
 		if (ret)
 			goto done;
 
+		if (mwifiex_11h_get_csa_closed_channel(priv) ==
+							(u8)bss_desc->channel) {
+			dev_err(adapter->dev,
+				"Attempt to reconnect on csa closed chan(%d)\n",
+				bss_desc->channel);
+			goto done;
+		}
+
 		dev_dbg(adapter->dev, "info: SSID found in scan list ... "
 				      "associating...\n");
 
-- 
cgit v1.2.3