From ed9a84262a83ab0260325c2f5eae39e441003d55 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 29 Nov 2014 08:30:51 +0100 Subject: drm: tda998x: Protect the page register As the HDMI registers of the TDA998x chips are accessed by pages, the page register must be protected. Signed-off-by: Jean-Francois Moine Signed-off-by: Russell King --- drivers/gpu/drm/i2c/tda998x_drv.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index d4762799351d..6795f094f737 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -32,6 +32,7 @@ struct tda998x_priv { struct i2c_client *cec; struct i2c_client *hdmi; + struct mutex mutex; uint16_t rev; uint8_t current_page; int dpms; @@ -402,9 +403,10 @@ reg_read_range(struct tda998x_priv *priv, uint16_t reg, char *buf, int cnt) uint8_t addr = REG2ADDR(reg); int ret; + mutex_lock(&priv->mutex); ret = set_page(priv, reg); if (ret < 0) - return ret; + goto out; ret = i2c_master_send(client, &addr, sizeof(addr)); if (ret < 0) @@ -414,10 +416,12 @@ reg_read_range(struct tda998x_priv *priv, uint16_t reg, char *buf, int cnt) if (ret < 0) goto fail; - return ret; + goto out; fail: dev_err(&client->dev, "Error %d reading from 0x%x\n", ret, reg); +out: + mutex_unlock(&priv->mutex); return ret; } @@ -431,13 +435,16 @@ reg_write_range(struct tda998x_priv *priv, uint16_t reg, uint8_t *p, int cnt) buf[0] = REG2ADDR(reg); memcpy(&buf[1], p, cnt); + mutex_lock(&priv->mutex); ret = set_page(priv, reg); if (ret < 0) - return; + goto out; ret = i2c_master_send(client, buf, cnt + 1); if (ret < 0) dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg); +out: + mutex_unlock(&priv->mutex); } static int @@ -459,13 +466,16 @@ reg_write(struct tda998x_priv *priv, uint16_t reg, uint8_t val) uint8_t buf[] = {REG2ADDR(reg), val}; int ret; + mutex_lock(&priv->mutex); ret = set_page(priv, reg); if (ret < 0) - return; + goto out; ret = i2c_master_send(client, buf, sizeof(buf)); if (ret < 0) dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg); +out: + mutex_unlock(&priv->mutex); } static void @@ -475,13 +485,16 @@ reg_write16(struct tda998x_priv *priv, uint16_t reg, uint16_t val) uint8_t buf[] = {REG2ADDR(reg), val >> 8, val}; int ret; + mutex_lock(&priv->mutex); ret = set_page(priv, reg); if (ret < 0) - return; + goto out; ret = i2c_master_send(client, buf, sizeof(buf)); if (ret < 0) dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg); +out: + mutex_unlock(&priv->mutex); } static void @@ -1268,6 +1281,8 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv) priv->dpms = DRM_MODE_DPMS_OFF; + mutex_init(&priv->mutex); /* protect the page access */ + /* wake up the device: */ cec_write(priv, REG_CEC_ENAMODS, CEC_ENAMODS_EN_RXSENS | CEC_ENAMODS_EN_HDMI); -- cgit v1.2.3 From 6833d26ef823b20acbf9d4afcfd7077e623b302c Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 29 Nov 2014 08:57:15 +0100 Subject: drm: tda998x: Fix EDID read timeout on HDMI connect When the HDMI cable is disconnected and reconnected, EDID reading is called too early raising a EDID read timeout. This patch uses the system work queue to delay the notification of the HDMI connect/disconnect event. Signed-off-by: Jean-Francois Moine Signed-off-by: Russell King --- drivers/gpu/drm/i2c/tda998x_drv.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index 6795f094f737..98f3c4dd7375 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -33,6 +33,7 @@ struct tda998x_priv { struct i2c_client *cec; struct i2c_client *hdmi; struct mutex mutex; + struct delayed_work dwork; uint16_t rev; uint8_t current_page; int dpms; @@ -549,6 +550,17 @@ tda998x_reset(struct tda998x_priv *priv) reg_write(priv, REG_MUX_VP_VIP_OUT, 0x24); } +/* handle HDMI connect/disconnect */ +static void tda998x_hpd(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct tda998x_priv *priv = + container_of(dwork, struct tda998x_priv, dwork); + + if (priv->encoder && priv->encoder->dev) + drm_kms_helper_hotplug_event(priv->encoder->dev); +} + /* * only 2 interrupts may occur: screen plug/unplug and EDID read */ @@ -572,8 +584,7 @@ static irqreturn_t tda998x_irq_thread(int irq, void *data) priv->wq_edid_wait = 0; wake_up(&priv->wq_edid); } else if (cec != 0) { /* HPD change */ - if (priv->encoder && priv->encoder->dev) - drm_helper_hpd_irq_event(priv->encoder->dev); + schedule_delayed_work(&priv->dwork, HZ/10); } return IRQ_HANDLED; } @@ -1183,8 +1194,10 @@ static void tda998x_destroy(struct tda998x_priv *priv) /* disable all IRQs and free the IRQ handler */ cec_write(priv, REG_CEC_RXSHPDINTENA, 0); reg_clear(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD); - if (priv->hdmi->irq) + if (priv->hdmi->irq) { free_irq(priv->hdmi->irq, priv); + cancel_delayed_work_sync(&priv->dwork); + } i2c_unregister_device(priv->cec); } @@ -1338,8 +1351,9 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv) if (client->irq) { int irqf_trigger; - /* init read EDID waitqueue */ + /* init read EDID waitqueue and HDP work */ init_waitqueue_head(&priv->wq_edid); + INIT_DELAYED_WORK(&priv->dwork, tda998x_hpd); /* clear pending interrupts */ reg_read(priv, REG_INT_FLAGS_0); -- cgit v1.2.3 From f046bfdf735794d5893963427eb54302b7940a86 Mon Sep 17 00:00:00 2001 From: Ben Goz Date: Thu, 15 Jan 2015 17:14:47 +0200 Subject: drm/amdkfd: PQM handle queue creation fault If the first queue created was failed on DQM then PQM should unregister the process from DQM. Signed-off-by: Ben Goz Signed-off-by: Oded Gabbay --- drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c index 47526780d736..326d26881afd 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c @@ -241,7 +241,10 @@ int pqm_create_queue(struct process_queue_manager *pqm, err_create_queue: kfree(pqn); err_allocate_pqn: + /* check if queues list is empty unregister process from device */ clear_bit(*qid, pqm->queue_slot_bitmap); + if (list_empty(&pqm->queues)) + dev->dqm->unregister_process(dev->dqm, &pdd->qpd); return retval; } -- cgit v1.2.3 From b8cbab042cd69f3918a51620986514681c6cbad0 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Sun, 18 Jan 2015 13:18:01 +0200 Subject: drm/amdkfd: Allow user to limit only queues per device This patch replaces the two current amdkfd module parameters with a new one. The current parameters that are being replaced are: - Maximum number of HSA processes - Maximum number of queues per process The new parameter that replaces them is called "Maximum queues per device" This replacement achieves two goals: - Allows the user to have as many HSA processes as it wants (until a maximum of 512 HSA processes in Kaveri). - Removes the limitation the user had on maximum number of queues per HSA process. E.g. the user can now have processes which only have one queue and other processes which have hundreds of queues, while before the user couldn't have more than 128 queues per process (as default). The default value of the new parameter is 4096 (32 * 128, which were the defaults of the old parameters). There is almost no additional GART memory required for the default case. As a reminder, this amount of queues requires a little bit below 4MB of GART memory. v2: In addition, This patch defines a new counter for queues accounting in the DQM structure. This is done because the current counter only counts active queues which allows the user to create more queues than the max_num_of_queues_per_device module parameter allows. However, we need the current counter for the runlist packet build process, so the solution is to have a dedicated counter for this accounting. Signed-off-by: Oded Gabbay Reviewed-by: Ben Goz --- drivers/gpu/drm/amd/amdkfd/kfd_device.c | 6 +- .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 70 ++++++++++++++++++++++ .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.h | 1 + drivers/gpu/drm/amd/amdkfd/kfd_module.c | 27 +++------ drivers/gpu/drm/amd/amdkfd/kfd_pasid.c | 2 +- drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 17 +++--- .../gpu/drm/amd/amdkfd/kfd_process_queue_manager.c | 9 +-- 7 files changed, 96 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c index 633532a2e7ec..25bc47f3c1cf 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c @@ -26,6 +26,7 @@ #include #include "kfd_priv.h" #include "kfd_device_queue_manager.h" +#include "kfd_pm4_headers.h" #define MQD_SIZE_ALIGNED 768 @@ -169,9 +170,8 @@ bool kgd2kfd_device_init(struct kfd_dev *kfd, kfd->shared_resources = *gpu_resources; /* calculate max size of mqds needed for queues */ - size = max_num_of_processes * - max_num_of_queues_per_process * - kfd->device_info->mqd_size_aligned; + size = max_num_of_queues_per_device * + kfd->device_info->mqd_size_aligned; /* add another 512KB for all other allocations on gart */ size += 512 * 1024; diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index 30c8fda9622e..b9626ae07960 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -183,6 +183,13 @@ static int create_queue_nocpsch(struct device_queue_manager *dqm, mutex_lock(&dqm->lock); + if (dqm->total_queue_count >= max_num_of_queues_per_device) { + pr_warn("amdkfd: Can't create new usermode queue because %d queues were already created\n", + dqm->total_queue_count); + mutex_unlock(&dqm->lock); + return -EPERM; + } + if (list_empty(&qpd->queues_list)) { retval = allocate_vmid(dqm, qpd, q); if (retval != 0) { @@ -207,6 +214,14 @@ static int create_queue_nocpsch(struct device_queue_manager *dqm, list_add(&q->list, &qpd->queues_list); dqm->queue_count++; + /* + * Unconditionally increment this counter, regardless of the queue's + * type or whether the queue is active. + */ + dqm->total_queue_count++; + pr_debug("Total of %d queues are accountable so far\n", + dqm->total_queue_count); + mutex_unlock(&dqm->lock); return 0; } @@ -326,6 +341,15 @@ static int destroy_queue_nocpsch(struct device_queue_manager *dqm, if (list_empty(&qpd->queues_list)) deallocate_vmid(dqm, qpd, q); dqm->queue_count--; + + /* + * Unconditionally decrement this counter, regardless of the queue's + * type + */ + dqm->total_queue_count--; + pr_debug("Total of %d queues are accountable so far\n", + dqm->total_queue_count); + out: mutex_unlock(&dqm->lock); return retval; @@ -752,6 +776,21 @@ static int create_kernel_queue_cpsch(struct device_queue_manager *dqm, pr_debug("kfd: In func %s\n", __func__); mutex_lock(&dqm->lock); + if (dqm->total_queue_count >= max_num_of_queues_per_device) { + pr_warn("amdkfd: Can't create new kernel queue because %d queues were already created\n", + dqm->total_queue_count); + mutex_unlock(&dqm->lock); + return -EPERM; + } + + /* + * Unconditionally increment this counter, regardless of the queue's + * type or whether the queue is active. + */ + dqm->total_queue_count++; + pr_debug("Total of %d queues are accountable so far\n", + dqm->total_queue_count); + list_add(&kq->list, &qpd->priv_queue_list); dqm->queue_count++; qpd->is_debug = true; @@ -775,6 +814,13 @@ static void destroy_kernel_queue_cpsch(struct device_queue_manager *dqm, dqm->queue_count--; qpd->is_debug = false; execute_queues_cpsch(dqm, false); + /* + * Unconditionally decrement this counter, regardless of the queue's + * type. + */ + dqm->total_queue_count++; + pr_debug("Total of %d queues are accountable so far\n", + dqm->total_queue_count); mutex_unlock(&dqm->lock); } @@ -793,6 +839,13 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q, mutex_lock(&dqm->lock); + if (dqm->total_queue_count >= max_num_of_queues_per_device) { + pr_warn("amdkfd: Can't create new usermode queue because %d queues were already created\n", + dqm->total_queue_count); + retval = -EPERM; + goto out; + } + mqd = dqm->get_mqd_manager(dqm, KFD_MQD_TYPE_CIK_CP); if (mqd == NULL) { mutex_unlock(&dqm->lock); @@ -810,6 +863,15 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q, retval = execute_queues_cpsch(dqm, false); } + /* + * Unconditionally increment this counter, regardless of the queue's + * type or whether the queue is active. + */ + dqm->total_queue_count++; + + pr_debug("Total of %d queues are accountable so far\n", + dqm->total_queue_count); + out: mutex_unlock(&dqm->lock); return retval; @@ -930,6 +992,14 @@ static int destroy_queue_cpsch(struct device_queue_manager *dqm, mqd->uninit_mqd(mqd, q->mqd, q->mqd_mem_obj); + /* + * Unconditionally decrement this counter, regardless of the queue's + * type + */ + dqm->total_queue_count--; + pr_debug("Total of %d queues are accountable so far\n", + dqm->total_queue_count); + mutex_unlock(&dqm->lock); return 0; diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h index c3f189e8ae35..52035bf0c1cb 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h @@ -130,6 +130,7 @@ struct device_queue_manager { struct list_head queues; unsigned int processes_count; unsigned int queue_count; + unsigned int total_queue_count; unsigned int next_pipe_to_allocate; unsigned int *allocated_queues; unsigned int vmid_bitmap; diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_module.c b/drivers/gpu/drm/amd/amdkfd/kfd_module.c index 95d5af138e6e..a8be6df85347 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_module.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_module.c @@ -50,15 +50,10 @@ module_param(sched_policy, int, 0444); MODULE_PARM_DESC(sched_policy, "Kernel cmdline parameter that defines the amdkfd scheduling policy"); -int max_num_of_processes = KFD_MAX_NUM_OF_PROCESSES_DEFAULT; -module_param(max_num_of_processes, int, 0444); -MODULE_PARM_DESC(max_num_of_processes, - "Kernel cmdline parameter that defines the amdkfd maximum number of supported processes"); - -int max_num_of_queues_per_process = KFD_MAX_NUM_OF_QUEUES_PER_PROCESS_DEFAULT; -module_param(max_num_of_queues_per_process, int, 0444); -MODULE_PARM_DESC(max_num_of_queues_per_process, - "Kernel cmdline parameter that defines the amdkfd maximum number of supported queues per process"); +int max_num_of_queues_per_device = KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT; +module_param(max_num_of_queues_per_device, int, 0444); +MODULE_PARM_DESC(max_num_of_queues_per_device, + "Maximum number of supported queues per device (1 = Minimum, 4096 = default)"); bool kgd2kfd_init(unsigned interface_version, const struct kfd2kgd_calls *f2g, @@ -100,16 +95,10 @@ static int __init kfd_module_init(void) } /* Verify module parameters */ - if ((max_num_of_processes < 0) || - (max_num_of_processes > KFD_MAX_NUM_OF_PROCESSES)) { - pr_err("kfd: max_num_of_processes must be between 0 to KFD_MAX_NUM_OF_PROCESSES\n"); - return -1; - } - - if ((max_num_of_queues_per_process < 0) || - (max_num_of_queues_per_process > - KFD_MAX_NUM_OF_QUEUES_PER_PROCESS)) { - pr_err("kfd: max_num_of_queues_per_process must be between 0 to KFD_MAX_NUM_OF_QUEUES_PER_PROCESS\n"); + if ((max_num_of_queues_per_device < 0) || + (max_num_of_queues_per_device > + KFD_MAX_NUM_OF_QUEUES_PER_DEVICE)) { + pr_err("kfd: max_num_of_queues_per_device must be between 0 to KFD_MAX_NUM_OF_QUEUES_PER_DEVICE\n"); return -1; } diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_pasid.c b/drivers/gpu/drm/amd/amdkfd/kfd_pasid.c index 4c25ef504f79..6cfe7f1f18cf 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_pasid.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_pasid.c @@ -30,7 +30,7 @@ static DEFINE_MUTEX(pasid_mutex); int kfd_pasid_init(void) { - pasid_limit = max_num_of_processes; + pasid_limit = KFD_MAX_NUM_OF_PROCESSES; pasid_bitmap = kcalloc(BITS_TO_LONGS(pasid_limit), sizeof(long), GFP_KERNEL); if (!pasid_bitmap) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h index b3dc13c83169..96dc10e8904a 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h @@ -52,20 +52,19 @@ #define kfd_alloc_struct(ptr_to_struct) \ ((typeof(ptr_to_struct)) kzalloc(sizeof(*ptr_to_struct), GFP_KERNEL)) -/* Kernel module parameter to specify maximum number of supported processes */ -extern int max_num_of_processes; - -#define KFD_MAX_NUM_OF_PROCESSES_DEFAULT 32 #define KFD_MAX_NUM_OF_PROCESSES 512 +#define KFD_MAX_NUM_OF_QUEUES_PER_PROCESS 1024 /* - * Kernel module parameter to specify maximum number of supported queues - * per process + * Kernel module parameter to specify maximum number of supported queues per + * device */ -extern int max_num_of_queues_per_process; +extern int max_num_of_queues_per_device; -#define KFD_MAX_NUM_OF_QUEUES_PER_PROCESS_DEFAULT 128 -#define KFD_MAX_NUM_OF_QUEUES_PER_PROCESS 1024 +#define KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT 4096 +#define KFD_MAX_NUM_OF_QUEUES_PER_DEVICE \ + (KFD_MAX_NUM_OF_PROCESSES * \ + KFD_MAX_NUM_OF_QUEUES_PER_PROCESS) #define KFD_KERNEL_QUEUE_SIZE 2048 diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c index 326d26881afd..f37cf5efe642 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c @@ -54,11 +54,11 @@ static int find_available_queue_slot(struct process_queue_manager *pqm, pr_debug("kfd: in %s\n", __func__); found = find_first_zero_bit(pqm->queue_slot_bitmap, - max_num_of_queues_per_process); + KFD_MAX_NUM_OF_QUEUES_PER_PROCESS); pr_debug("kfd: the new slot id %lu\n", found); - if (found >= max_num_of_queues_per_process) { + if (found >= KFD_MAX_NUM_OF_QUEUES_PER_PROCESS) { pr_info("amdkfd: Can not open more queues for process with pasid %d\n", pqm->process->pasid); return -ENOMEM; @@ -76,7 +76,7 @@ int pqm_init(struct process_queue_manager *pqm, struct kfd_process *p) INIT_LIST_HEAD(&pqm->queues); pqm->queue_slot_bitmap = - kzalloc(DIV_ROUND_UP(max_num_of_queues_per_process, + kzalloc(DIV_ROUND_UP(KFD_MAX_NUM_OF_QUEUES_PER_PROCESS, BITS_PER_BYTE), GFP_KERNEL); if (pqm->queue_slot_bitmap == NULL) return -ENOMEM; @@ -203,6 +203,7 @@ int pqm_create_queue(struct process_queue_manager *pqm, pqn->kq = NULL; retval = dev->dqm->create_queue(dev->dqm, q, &pdd->qpd, &q->properties.vmid); + pr_debug("DQM returned %d for create_queue\n", retval); print_queue(q); break; case KFD_QUEUE_TYPE_DIQ: @@ -222,7 +223,7 @@ int pqm_create_queue(struct process_queue_manager *pqm, } if (retval != 0) { - pr_err("kfd: error dqm create queue\n"); + pr_debug("Error dqm create queue\n"); goto err_create_queue; } -- cgit v1.2.3 From 496eb6fd2c3fd13f4b914e537598e5c86ce4f52a Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 14 Jan 2015 02:33:39 -0800 Subject: drm/vmwgfx: Replace the hw mutex with a hw spinlock Fixes a case where we call vmw_fifo_idle() from within a wait function with task state !TASK_RUNNING, which is illegal. In addition, make the locking fine-grained, so that it is performed once for every read- and write operation. This is of course more costly, but we don't perform much register access in the timing critical paths anyway. Instead we have the extra benefit of being sure that we don't forget the hw lock around register accesses. I think currently the kms code was quite buggy w r t this. This fixes Red Hat Bugzilla Bug 1180796 Cc: stable@vger.kernel.org Signed-off-by: Thomas Hellstrom Reviewed-by: Jakob Bornecrantz --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 28 +++++---------------------- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 25 ++++++++++++++++++++---- drivers/gpu/drm/vmwgfx/vmwgfx_fence.c | 18 ++---------------- drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 36 +++++++++++++++-------------------- drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c | 8 ++++---- drivers/gpu/drm/vmwgfx/vmwgfx_irq.c | 25 +++++++++--------------- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 2 -- 7 files changed, 56 insertions(+), 86 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 7b5d22110f25..6c6b655defcf 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -406,11 +406,9 @@ int vmw_3d_resource_inc(struct vmw_private *dev_priv, if (unlikely(ret != 0)) --dev_priv->num_3d_resources; } else if (unhide_svga) { - mutex_lock(&dev_priv->hw_mutex); vmw_write(dev_priv, SVGA_REG_ENABLE, vmw_read(dev_priv, SVGA_REG_ENABLE) & ~SVGA_REG_ENABLE_HIDE); - mutex_unlock(&dev_priv->hw_mutex); } mutex_unlock(&dev_priv->release_mutex); @@ -433,13 +431,10 @@ void vmw_3d_resource_dec(struct vmw_private *dev_priv, mutex_lock(&dev_priv->release_mutex); if (unlikely(--dev_priv->num_3d_resources == 0)) vmw_release_device(dev_priv); - else if (hide_svga) { - mutex_lock(&dev_priv->hw_mutex); + else if (hide_svga) vmw_write(dev_priv, SVGA_REG_ENABLE, vmw_read(dev_priv, SVGA_REG_ENABLE) | SVGA_REG_ENABLE_HIDE); - mutex_unlock(&dev_priv->hw_mutex); - } n3d = (int32_t) dev_priv->num_3d_resources; mutex_unlock(&dev_priv->release_mutex); @@ -600,12 +595,14 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) dev_priv->dev = dev; dev_priv->vmw_chipset = chipset; dev_priv->last_read_seqno = (uint32_t) -100; - mutex_init(&dev_priv->hw_mutex); mutex_init(&dev_priv->cmdbuf_mutex); mutex_init(&dev_priv->release_mutex); mutex_init(&dev_priv->binding_mutex); rwlock_init(&dev_priv->resource_lock); ttm_lock_init(&dev_priv->reservation_sem); + spin_lock_init(&dev_priv->hw_lock); + spin_lock_init(&dev_priv->waiter_lock); + spin_lock_init(&dev_priv->cap_lock); for (i = vmw_res_context; i < vmw_res_max; ++i) { idr_init(&dev_priv->res_idr[i]); @@ -626,14 +623,11 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) dev_priv->enable_fb = enable_fbdev; - mutex_lock(&dev_priv->hw_mutex); - vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2); svga_id = vmw_read(dev_priv, SVGA_REG_ID); if (svga_id != SVGA_ID_2) { ret = -ENOSYS; DRM_ERROR("Unsupported SVGA ID 0x%x\n", svga_id); - mutex_unlock(&dev_priv->hw_mutex); goto out_err0; } @@ -683,10 +677,8 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) dev_priv->prim_bb_mem = dev_priv->vram_size; ret = vmw_dma_masks(dev_priv); - if (unlikely(ret != 0)) { - mutex_unlock(&dev_priv->hw_mutex); + if (unlikely(ret != 0)) goto out_err0; - } /* * Limit back buffer size to VRAM size. Remove this once @@ -695,8 +687,6 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) if (dev_priv->prim_bb_mem > dev_priv->vram_size) dev_priv->prim_bb_mem = dev_priv->vram_size; - mutex_unlock(&dev_priv->hw_mutex); - vmw_print_capabilities(dev_priv->capabilities); if (dev_priv->capabilities & SVGA_CAP_GMR2) { @@ -1160,9 +1150,7 @@ static int vmw_master_set(struct drm_device *dev, if (unlikely(ret != 0)) return ret; vmw_kms_save_vga(dev_priv); - mutex_lock(&dev_priv->hw_mutex); vmw_write(dev_priv, SVGA_REG_TRACES, 0); - mutex_unlock(&dev_priv->hw_mutex); } if (active) { @@ -1196,9 +1184,7 @@ out_no_active_lock: if (!dev_priv->enable_fb) { vmw_kms_restore_vga(dev_priv); vmw_3d_resource_dec(dev_priv, true); - mutex_lock(&dev_priv->hw_mutex); vmw_write(dev_priv, SVGA_REG_TRACES, 1); - mutex_unlock(&dev_priv->hw_mutex); } return ret; } @@ -1233,9 +1219,7 @@ static void vmw_master_drop(struct drm_device *dev, DRM_ERROR("Unable to clean VRAM on master drop.\n"); vmw_kms_restore_vga(dev_priv); vmw_3d_resource_dec(dev_priv, true); - mutex_lock(&dev_priv->hw_mutex); vmw_write(dev_priv, SVGA_REG_TRACES, 1); - mutex_unlock(&dev_priv->hw_mutex); } dev_priv->active_master = &dev_priv->fbdev_master; @@ -1367,10 +1351,8 @@ static void vmw_pm_complete(struct device *kdev) struct drm_device *dev = pci_get_drvdata(pdev); struct vmw_private *dev_priv = vmw_priv(dev); - mutex_lock(&dev_priv->hw_mutex); vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2); (void) vmw_read(dev_priv, SVGA_REG_ID); - mutex_unlock(&dev_priv->hw_mutex); /** * Reclaim 3d reference held by fbdev and potentially diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 4ee799b43d5d..d26a6daa9719 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -399,7 +399,8 @@ struct vmw_private { uint32_t memory_size; bool has_gmr; bool has_mob; - struct mutex hw_mutex; + spinlock_t hw_lock; + spinlock_t cap_lock; /* * VGA registers. @@ -449,8 +450,9 @@ struct vmw_private { atomic_t marker_seq; wait_queue_head_t fence_queue; wait_queue_head_t fifo_queue; - int fence_queue_waiters; /* Protected by hw_mutex */ - int goal_queue_waiters; /* Protected by hw_mutex */ + spinlock_t waiter_lock; + int fence_queue_waiters; /* Protected by waiter_lock */ + int goal_queue_waiters; /* Protected by waiter_lock */ atomic_t fifo_queue_waiters; uint32_t last_read_seqno; spinlock_t irq_lock; @@ -553,20 +555,35 @@ static inline struct vmw_master *vmw_master(struct drm_master *master) return (struct vmw_master *) master->driver_priv; } +/* + * The locking here is fine-grained, so that it is performed once + * for every read- and write operation. This is of course costly, but we + * don't perform much register access in the timing critical paths anyway. + * Instead we have the extra benefit of being sure that we don't forget + * the hw lock around register accesses. + */ static inline void vmw_write(struct vmw_private *dev_priv, unsigned int offset, uint32_t value) { + unsigned long irq_flags; + + spin_lock_irqsave(&dev_priv->hw_lock, irq_flags); outl(offset, dev_priv->io_start + VMWGFX_INDEX_PORT); outl(value, dev_priv->io_start + VMWGFX_VALUE_PORT); + spin_unlock_irqrestore(&dev_priv->hw_lock, irq_flags); } static inline uint32_t vmw_read(struct vmw_private *dev_priv, unsigned int offset) { - uint32_t val; + unsigned long irq_flags; + u32 val; + spin_lock_irqsave(&dev_priv->hw_lock, irq_flags); outl(offset, dev_priv->io_start + VMWGFX_INDEX_PORT); val = inl(dev_priv->io_start + VMWGFX_VALUE_PORT); + spin_unlock_irqrestore(&dev_priv->hw_lock, irq_flags); + return val; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c index b7594cb758af..945f1e0dad92 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c @@ -35,7 +35,7 @@ struct vmw_fence_manager { struct vmw_private *dev_priv; spinlock_t lock; struct list_head fence_list; - struct work_struct work, ping_work; + struct work_struct work; u32 user_fence_size; u32 fence_size; u32 event_fence_action_size; @@ -134,14 +134,6 @@ static const char *vmw_fence_get_timeline_name(struct fence *f) return "svga"; } -static void vmw_fence_ping_func(struct work_struct *work) -{ - struct vmw_fence_manager *fman = - container_of(work, struct vmw_fence_manager, ping_work); - - vmw_fifo_ping_host(fman->dev_priv, SVGA_SYNC_GENERIC); -} - static bool vmw_fence_enable_signaling(struct fence *f) { struct vmw_fence_obj *fence = @@ -155,11 +147,7 @@ static bool vmw_fence_enable_signaling(struct fence *f) if (seqno - fence->base.seqno < VMW_FENCE_WRAP) return false; - if (mutex_trylock(&dev_priv->hw_mutex)) { - vmw_fifo_ping_host_locked(dev_priv, SVGA_SYNC_GENERIC); - mutex_unlock(&dev_priv->hw_mutex); - } else - schedule_work(&fman->ping_work); + vmw_fifo_ping_host(dev_priv, SVGA_SYNC_GENERIC); return true; } @@ -305,7 +293,6 @@ struct vmw_fence_manager *vmw_fence_manager_init(struct vmw_private *dev_priv) INIT_LIST_HEAD(&fman->fence_list); INIT_LIST_HEAD(&fman->cleanup_list); INIT_WORK(&fman->work, &vmw_fence_work_func); - INIT_WORK(&fman->ping_work, &vmw_fence_ping_func); fman->fifo_down = true; fman->user_fence_size = ttm_round_pot(sizeof(struct vmw_user_fence)); fman->fence_size = ttm_round_pot(sizeof(struct vmw_fence_obj)); @@ -323,7 +310,6 @@ void vmw_fence_manager_takedown(struct vmw_fence_manager *fman) bool lists_empty; (void) cancel_work_sync(&fman->work); - (void) cancel_work_sync(&fman->ping_work); spin_lock_irqsave(&fman->lock, irq_flags); lists_empty = list_empty(&fman->fence_list) && diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index 09e10aefcd8e..39f2b03888e7 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -44,10 +44,10 @@ bool vmw_fifo_have_3d(struct vmw_private *dev_priv) if (!dev_priv->has_mob) return false; - mutex_lock(&dev_priv->hw_mutex); + spin_lock(&dev_priv->cap_lock); vmw_write(dev_priv, SVGA_REG_DEV_CAP, SVGA3D_DEVCAP_3D); result = vmw_read(dev_priv, SVGA_REG_DEV_CAP); - mutex_unlock(&dev_priv->hw_mutex); + spin_unlock(&dev_priv->cap_lock); return (result != 0); } @@ -120,7 +120,6 @@ int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo) DRM_INFO("height %d\n", vmw_read(dev_priv, SVGA_REG_HEIGHT)); DRM_INFO("bpp %d\n", vmw_read(dev_priv, SVGA_REG_BITS_PER_PIXEL)); - mutex_lock(&dev_priv->hw_mutex); dev_priv->enable_state = vmw_read(dev_priv, SVGA_REG_ENABLE); dev_priv->config_done_state = vmw_read(dev_priv, SVGA_REG_CONFIG_DONE); dev_priv->traces_state = vmw_read(dev_priv, SVGA_REG_TRACES); @@ -143,7 +142,6 @@ int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo) mb(); vmw_write(dev_priv, SVGA_REG_CONFIG_DONE, 1); - mutex_unlock(&dev_priv->hw_mutex); max = ioread32(fifo_mem + SVGA_FIFO_MAX); min = ioread32(fifo_mem + SVGA_FIFO_MIN); @@ -160,31 +158,28 @@ int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo) return vmw_fifo_send_fence(dev_priv, &dummy); } -void vmw_fifo_ping_host_locked(struct vmw_private *dev_priv, uint32_t reason) +void vmw_fifo_ping_host(struct vmw_private *dev_priv, uint32_t reason) { __le32 __iomem *fifo_mem = dev_priv->mmio_virt; + static DEFINE_SPINLOCK(ping_lock); + unsigned long irq_flags; + /* + * The ping_lock is needed because we don't have an atomic + * test-and-set of the SVGA_FIFO_BUSY register. + */ + spin_lock_irqsave(&ping_lock, irq_flags); if (unlikely(ioread32(fifo_mem + SVGA_FIFO_BUSY) == 0)) { iowrite32(1, fifo_mem + SVGA_FIFO_BUSY); vmw_write(dev_priv, SVGA_REG_SYNC, reason); } -} - -void vmw_fifo_ping_host(struct vmw_private *dev_priv, uint32_t reason) -{ - mutex_lock(&dev_priv->hw_mutex); - - vmw_fifo_ping_host_locked(dev_priv, reason); - - mutex_unlock(&dev_priv->hw_mutex); + spin_unlock_irqrestore(&ping_lock, irq_flags); } void vmw_fifo_release(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo) { __le32 __iomem *fifo_mem = dev_priv->mmio_virt; - mutex_lock(&dev_priv->hw_mutex); - vmw_write(dev_priv, SVGA_REG_SYNC, SVGA_SYNC_GENERIC); while (vmw_read(dev_priv, SVGA_REG_BUSY) != 0) ; @@ -198,7 +193,6 @@ void vmw_fifo_release(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo) vmw_write(dev_priv, SVGA_REG_TRACES, dev_priv->traces_state); - mutex_unlock(&dev_priv->hw_mutex); vmw_marker_queue_takedown(&fifo->marker_queue); if (likely(fifo->static_buffer != NULL)) { @@ -271,7 +265,7 @@ static int vmw_fifo_wait(struct vmw_private *dev_priv, return vmw_fifo_wait_noirq(dev_priv, bytes, interruptible, timeout); - mutex_lock(&dev_priv->hw_mutex); + spin_lock(&dev_priv->waiter_lock); if (atomic_add_return(1, &dev_priv->fifo_queue_waiters) > 0) { spin_lock_irqsave(&dev_priv->irq_lock, irq_flags); outl(SVGA_IRQFLAG_FIFO_PROGRESS, @@ -280,7 +274,7 @@ static int vmw_fifo_wait(struct vmw_private *dev_priv, vmw_write(dev_priv, SVGA_REG_IRQMASK, dev_priv->irq_mask); spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags); } - mutex_unlock(&dev_priv->hw_mutex); + spin_unlock(&dev_priv->waiter_lock); if (interruptible) ret = wait_event_interruptible_timeout @@ -296,14 +290,14 @@ static int vmw_fifo_wait(struct vmw_private *dev_priv, else if (likely(ret > 0)) ret = 0; - mutex_lock(&dev_priv->hw_mutex); + spin_lock(&dev_priv->waiter_lock); if (atomic_dec_and_test(&dev_priv->fifo_queue_waiters)) { spin_lock_irqsave(&dev_priv->irq_lock, irq_flags); dev_priv->irq_mask &= ~SVGA_IRQFLAG_FIFO_PROGRESS; vmw_write(dev_priv, SVGA_REG_IRQMASK, dev_priv->irq_mask); spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags); } - mutex_unlock(&dev_priv->hw_mutex); + spin_unlock(&dev_priv->waiter_lock); return ret; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index 37881ecf5d7a..69c8ce23123c 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -135,13 +135,13 @@ static int vmw_fill_compat_cap(struct vmw_private *dev_priv, void *bounce, (pair_offset + max_size * sizeof(SVGA3dCapPair)) / sizeof(u32); compat_cap->header.type = SVGA3DCAPS_RECORD_DEVCAPS; - mutex_lock(&dev_priv->hw_mutex); + spin_lock(&dev_priv->cap_lock); for (i = 0; i < max_size; ++i) { vmw_write(dev_priv, SVGA_REG_DEV_CAP, i); compat_cap->pairs[i][0] = i; compat_cap->pairs[i][1] = vmw_read(dev_priv, SVGA_REG_DEV_CAP); } - mutex_unlock(&dev_priv->hw_mutex); + spin_unlock(&dev_priv->cap_lock); return 0; } @@ -191,12 +191,12 @@ int vmw_get_cap_3d_ioctl(struct drm_device *dev, void *data, if (num > SVGA3D_DEVCAP_MAX) num = SVGA3D_DEVCAP_MAX; - mutex_lock(&dev_priv->hw_mutex); + spin_lock(&dev_priv->cap_lock); for (i = 0; i < num; ++i) { vmw_write(dev_priv, SVGA_REG_DEV_CAP, i); *bounce32++ = vmw_read(dev_priv, SVGA_REG_DEV_CAP); } - mutex_unlock(&dev_priv->hw_mutex); + spin_unlock(&dev_priv->cap_lock); } else if (gb_objects) { ret = vmw_fill_compat_cap(dev_priv, bounce, size); if (unlikely(ret != 0)) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c index 0c423766c441..9fe9827ee499 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c @@ -62,13 +62,8 @@ irqreturn_t vmw_irq_handler(int irq, void *arg) static bool vmw_fifo_idle(struct vmw_private *dev_priv, uint32_t seqno) { - uint32_t busy; - mutex_lock(&dev_priv->hw_mutex); - busy = vmw_read(dev_priv, SVGA_REG_BUSY); - mutex_unlock(&dev_priv->hw_mutex); - - return (busy == 0); + return (vmw_read(dev_priv, SVGA_REG_BUSY) == 0); } void vmw_update_seqno(struct vmw_private *dev_priv, @@ -184,7 +179,7 @@ int vmw_fallback_wait(struct vmw_private *dev_priv, void vmw_seqno_waiter_add(struct vmw_private *dev_priv) { - mutex_lock(&dev_priv->hw_mutex); + spin_lock(&dev_priv->waiter_lock); if (dev_priv->fence_queue_waiters++ == 0) { unsigned long irq_flags; @@ -195,12 +190,12 @@ void vmw_seqno_waiter_add(struct vmw_private *dev_priv) vmw_write(dev_priv, SVGA_REG_IRQMASK, dev_priv->irq_mask); spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags); } - mutex_unlock(&dev_priv->hw_mutex); + spin_unlock(&dev_priv->waiter_lock); } void vmw_seqno_waiter_remove(struct vmw_private *dev_priv) { - mutex_lock(&dev_priv->hw_mutex); + spin_lock(&dev_priv->waiter_lock); if (--dev_priv->fence_queue_waiters == 0) { unsigned long irq_flags; @@ -209,13 +204,13 @@ void vmw_seqno_waiter_remove(struct vmw_private *dev_priv) vmw_write(dev_priv, SVGA_REG_IRQMASK, dev_priv->irq_mask); spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags); } - mutex_unlock(&dev_priv->hw_mutex); + spin_unlock(&dev_priv->waiter_lock); } void vmw_goal_waiter_add(struct vmw_private *dev_priv) { - mutex_lock(&dev_priv->hw_mutex); + spin_lock(&dev_priv->waiter_lock); if (dev_priv->goal_queue_waiters++ == 0) { unsigned long irq_flags; @@ -226,12 +221,12 @@ void vmw_goal_waiter_add(struct vmw_private *dev_priv) vmw_write(dev_priv, SVGA_REG_IRQMASK, dev_priv->irq_mask); spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags); } - mutex_unlock(&dev_priv->hw_mutex); + spin_unlock(&dev_priv->waiter_lock); } void vmw_goal_waiter_remove(struct vmw_private *dev_priv) { - mutex_lock(&dev_priv->hw_mutex); + spin_lock(&dev_priv->waiter_lock); if (--dev_priv->goal_queue_waiters == 0) { unsigned long irq_flags; @@ -240,7 +235,7 @@ void vmw_goal_waiter_remove(struct vmw_private *dev_priv) vmw_write(dev_priv, SVGA_REG_IRQMASK, dev_priv->irq_mask); spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags); } - mutex_unlock(&dev_priv->hw_mutex); + spin_unlock(&dev_priv->waiter_lock); } int vmw_wait_seqno(struct vmw_private *dev_priv, @@ -315,9 +310,7 @@ void vmw_irq_uninstall(struct drm_device *dev) if (!(dev_priv->capabilities & SVGA_CAP_IRQMASK)) return; - mutex_lock(&dev_priv->hw_mutex); vmw_write(dev_priv, SVGA_REG_IRQMASK, 0); - mutex_unlock(&dev_priv->hw_mutex); status = inl(dev_priv->io_start + VMWGFX_IRQSTATUS_PORT); outl(status, dev_priv->io_start + VMWGFX_IRQSTATUS_PORT); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 3725b521d931..8725b79e7847 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1828,9 +1828,7 @@ vmw_du_connector_detect(struct drm_connector *connector, bool force) struct vmw_private *dev_priv = vmw_priv(dev); struct vmw_display_unit *du = vmw_connector_to_du(connector); - mutex_lock(&dev_priv->hw_mutex); num_displays = vmw_read(dev_priv, SVGA_REG_NUM_DISPLAYS); - mutex_unlock(&dev_priv->hw_mutex); return ((vmw_connector_to_du(connector)->unit < num_displays && du->pref_active) ? -- cgit v1.2.3 From cf54772b913b6dcfcbe2f4f909bb65f5beff748d Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Thu, 15 Jan 2015 12:11:36 +0100 Subject: usb: dwc2: call dwc2_is_controller_alive() under spinlock This patch fixes the following problem: data transmission in direction IN break unless the GSNPSID register access is done with spinlock held. This issue occurs at least in Exynos4412 SoC, probably in many SoC's from Exynos familly. The problem is described here: https://lkml.org/lkml/2014/12/22/185 And there is linux mailing list discussion: https://lkml.org/lkml/2015/1/14/17 Signed-off-by: Robert Baldyga Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/core_intr.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index ad43c5bc1ef1..02e3e2d4ea56 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -476,13 +476,13 @@ irqreturn_t dwc2_handle_common_intr(int irq, void *dev) u32 gintsts; irqreturn_t retval = IRQ_NONE; + spin_lock(&hsotg->lock); + if (!dwc2_is_controller_alive(hsotg)) { dev_warn(hsotg->dev, "Controller is dead\n"); goto out; } - spin_lock(&hsotg->lock); - gintsts = dwc2_read_common_intr(hsotg); if (gintsts & ~GINTSTS_PRTINT) retval = IRQ_HANDLED; @@ -515,8 +515,8 @@ irqreturn_t dwc2_handle_common_intr(int irq, void *dev) } } - spin_unlock(&hsotg->lock); out: + spin_unlock(&hsotg->lock); return retval; } EXPORT_SYMBOL_GPL(dwc2_handle_common_intr); -- cgit v1.2.3 From 0df8fc37f6e4a1c25c56741c3fe82970c02b7786 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 16 Jan 2015 10:30:15 +0200 Subject: usb: phy: never defer probe in non-OF case In practice failure to find phy when requested in non-OF case means it will never become available, so __usb_find_phy() must return -ENODEV and not -EPROBE_DEFER. This fixes a regression caused by commit 9c9d82492b73 (usb: phy: Fix deferred probing), where the USB controller driver is left infinitely into deferred probe when there are no phys. Fixes: 9c9d82492b73 (usb: phy: Fix deferred probing) Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index ccfdfb24b240..2f9735b35338 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -34,7 +34,7 @@ static struct usb_phy *__usb_find_phy(struct list_head *list, return phy; } - return ERR_PTR(-EPROBE_DEFER); + return ERR_PTR(-ENODEV); } static struct usb_phy *__usb_find_phy_dev(struct device *dev, -- cgit v1.2.3 From 8543cf1c247909ce85850ca6e2714adba351d6aa Mon Sep 17 00:00:00 2001 From: Peter Hutterer Date: Mon, 19 Jan 2015 16:29:25 -0800 Subject: Input: synaptics - adjust min/max for Lenovo ThinkPad X1 Carbon 2nd LEN0037 found in the Lenovo ThinkPad X1 Carbon 2nd (2014 model) Cc: stable@vger.kernel.org Reported-and-tested-by: Bjoern Olausson Signed-off-by: Peter Hutterer Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index f9472920d986..23e26e0768b5 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -135,8 +135,9 @@ static const struct min_max_quirk min_max_pnpid_table[] = { 1232, 5710, 1156, 4696 }, { - (const char * const []){"LEN0034", "LEN0036", "LEN0039", - "LEN2002", "LEN2004", NULL}, + (const char * const []){"LEN0034", "LEN0036", "LEN0037", + "LEN0039", "LEN2002", "LEN2004", + NULL}, 1024, 5112, 2024, 4832 }, { @@ -165,7 +166,7 @@ static const char * const topbuttonpad_pnp_ids[] = { "LEN0034", /* T431s, L440, L540, T540, W540, X1 Carbon 2nd */ "LEN0035", /* X240 */ "LEN0036", /* T440 */ - "LEN0037", + "LEN0037", /* X1 Carbon 2nd */ "LEN0038", "LEN0039", /* T440s */ "LEN0041", -- cgit v1.2.3 From cfe387572585216ffd452256181a719ca90b529e Mon Sep 17 00:00:00 2001 From: Andrew Jackson Date: Fri, 7 Nov 2014 08:31:25 +0000 Subject: drm/i2c: tda998x: set the CEC I2C address based on the slave I2C address The I2C address for the TDA9989 and TDA19989 is fixed at 0x34 but the two LSBs of the TDA19988's address are set by two configuration pins on the chip. Irrespective of the chip, the associated CEC peripheral's I2C address is based upon the main I2C address. This patch avoids any special handling required to support systems that contain multiple TDA19988 devices on the same I2C bus. Signed-off-by: Andrew Jackson Signed-off-by: Liviu Dudau Signed-off-by: Russell King --- drivers/gpu/drm/i2c/tda998x_drv.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index 98f3c4dd7375..a9041d1a8ff0 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -1281,6 +1281,7 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv) struct device_node *np = client->dev.of_node; u32 video; int rev_lo, rev_hi, ret; + unsigned short cec_addr; priv->vip_cntrl_0 = VIP_CNTRL_0_SWAP_A(2) | VIP_CNTRL_0_SWAP_B(3); priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(0) | VIP_CNTRL_1_SWAP_D(1); @@ -1288,7 +1289,9 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv) priv->current_page = 0xff; priv->hdmi = client; - priv->cec = i2c_new_dummy(client->adapter, 0x34); + /* CEC I2C address bound to TDA998x I2C addr by configuration pins */ + cec_addr = 0x34 + (client->addr & 0x03); + priv->cec = i2c_new_dummy(client->adapter, cec_addr); if (!priv->cec) return -ENODEV; -- cgit v1.2.3 From 5a8888a3119eb5b67f6e90605be9ed2e04807126 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Thu, 22 Jan 2015 12:48:33 +0200 Subject: drm/radeon: Don't increment pipe_id in kgd_init_pipeline This patch fixes the behavior of kgd_init_pipeline in that this function shouldn't automatically increase the pipe_id argument by 1 right at the start of the function. This is because the first_pipe value might not be always 1, and because a proper interface function should not hide this info inside its implementation. In other words, the calling function should provide the real pipe_id and not count on kgd_init_pipeline to "fix" it. Signed-off-by: Oded Gabbay Reviewed-by: Alex Deucher Reviewed-by: Jammy Zhou --- drivers/gpu/drm/radeon/radeon_kfd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_kfd.c b/drivers/gpu/drm/radeon/radeon_kfd.c index 8bf87f1203cc..bef9a0953284 100644 --- a/drivers/gpu/drm/radeon/radeon_kfd.c +++ b/drivers/gpu/drm/radeon/radeon_kfd.c @@ -436,7 +436,7 @@ static int kgd_init_memory(struct kgd_dev *kgd) static int kgd_init_pipeline(struct kgd_dev *kgd, uint32_t pipe_id, uint32_t hpd_size, uint64_t hpd_gpu_addr) { - uint32_t mec = (++pipe_id / CIK_PIPE_PER_MEC) + 1; + uint32_t mec = (pipe_id / CIK_PIPE_PER_MEC) + 1; uint32_t pipe = (pipe_id % CIK_PIPE_PER_MEC); lock_srbm(kgd, mec, pipe, 0, 0); -- cgit v1.2.3 From 749042b012b82616ed15a28138e180c5e5da2067 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Thu, 22 Jan 2015 11:03:42 +0200 Subject: drm/amdkfd: Fix bug in pipelines initialization This patch fixes a bug when calling to init_pipeline() interface. The index that was passed to that function didn't take into account the first_pipe value, which represents the first pipe index that is under amdkfd's responsibility. Signed-off-by: Oded Gabbay Reviewed-by: Alex Deucher Reviewed-by: Jammy Zhou --- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index b9626ae07960..cd0710af0031 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -565,10 +565,14 @@ static int init_pipelines(struct device_queue_manager *dqm, for (i = 0; i < pipes_num; i++) { inx = i + first_pipe; + /* + * HPD buffer on GTT is allocated by amdkfd, no need to waste + * space in GTT for pipelines we don't initialize + */ pipe_hpd_addr = dqm->pipelines_addr + i * CIK_HPD_EOP_BYTES; pr_debug("kfd: pipeline address %llX\n", pipe_hpd_addr); /* = log2(bytes/4)-1 */ - kfd2kgd->init_pipeline(dqm->dev->kgd, i, + kfd2kgd->init_pipeline(dqm->dev->kgd, inx, CIK_HPD_EOP_BYTES_LOG2 - 3, pipe_hpd_addr); } -- cgit v1.2.3 From 9fa843e76d9092e5348aac7252cbb71f09902507 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Thu, 22 Jan 2015 12:50:37 +0200 Subject: drm/amdkfd: Fix bug in call to init_pipelines() This patch fixes a bug where the first_pipe index passed into init_pipelines() was a #define instead of the value that is passed into amdkfd by radeon Signed-off-by: Oded Gabbay Reviewed-by: Alex Deucher Reviewed-by: Jammy Zhou --- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index cd0710af0031..0d8694f015c1 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -588,7 +588,7 @@ static int init_scheduler(struct device_queue_manager *dqm) pr_debug("kfd: In %s\n", __func__); - retval = init_pipelines(dqm, get_pipes_num(dqm), KFD_DQM_FIRST_PIPE); + retval = init_pipelines(dqm, get_pipes_num(dqm), get_first_pipe(dqm)); if (retval != 0) return retval; -- cgit v1.2.3 From cb65890610dca287718a63bd8a5d9ce3dc80c3d7 Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Wed, 21 Jan 2015 17:36:35 +0900 Subject: drm/radeon: Split off gart_get_page_entry ASIC hook from set_page_entry MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit get_page_entry calculates the GART page table entry, which is just written to the GART page table by set_page_entry. This is a prerequisite for the following fix. Reviewed-by: Christian König Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r100.c | 10 +++++++-- drivers/gpu/drm/radeon/r300.c | 16 ++++++++++----- drivers/gpu/drm/radeon/radeon.h | 8 ++++++-- drivers/gpu/drm/radeon/radeon_asic.c | 24 ++++++++++++++++++++++ drivers/gpu/drm/radeon/radeon_asic.h | 12 +++++++---- drivers/gpu/drm/radeon/radeon_device.c | 2 ++ drivers/gpu/drm/radeon/radeon_gart.c | 37 +++++++++++++++++++++------------- drivers/gpu/drm/radeon/rs400.c | 14 ++++++++----- drivers/gpu/drm/radeon/rs600.c | 14 ++++++++----- 9 files changed, 100 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 74f06d540591..279801ca5110 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -644,6 +644,7 @@ int r100_pci_gart_init(struct radeon_device *rdev) return r; rdev->gart.table_size = rdev->gart.num_gpu_pages * 4; rdev->asic->gart.tlb_flush = &r100_pci_gart_tlb_flush; + rdev->asic->gart.get_page_entry = &r100_pci_gart_get_page_entry; rdev->asic->gart.set_page = &r100_pci_gart_set_page; return radeon_gart_table_ram_alloc(rdev); } @@ -681,11 +682,16 @@ void r100_pci_gart_disable(struct radeon_device *rdev) WREG32(RADEON_AIC_HI_ADDR, 0); } +uint64_t r100_pci_gart_get_page_entry(uint64_t addr, uint32_t flags) +{ + return addr; +} + void r100_pci_gart_set_page(struct radeon_device *rdev, unsigned i, - uint64_t addr, uint32_t flags) + uint64_t entry) { u32 *gtt = rdev->gart.ptr; - gtt[i] = cpu_to_le32(lower_32_bits(addr)); + gtt[i] = cpu_to_le32(lower_32_bits(entry)); } void r100_pci_gart_fini(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 064ad5569cca..08d68f3e13e9 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -73,11 +73,8 @@ void rv370_pcie_gart_tlb_flush(struct radeon_device *rdev) #define R300_PTE_WRITEABLE (1 << 2) #define R300_PTE_READABLE (1 << 3) -void rv370_pcie_gart_set_page(struct radeon_device *rdev, unsigned i, - uint64_t addr, uint32_t flags) +uint64_t rv370_pcie_gart_get_page_entry(uint64_t addr, uint32_t flags) { - void __iomem *ptr = rdev->gart.ptr; - addr = (lower_32_bits(addr) >> 8) | ((upper_32_bits(addr) & 0xff) << 24); if (flags & RADEON_GART_PAGE_READ) @@ -86,10 +83,18 @@ void rv370_pcie_gart_set_page(struct radeon_device *rdev, unsigned i, addr |= R300_PTE_WRITEABLE; if (!(flags & RADEON_GART_PAGE_SNOOP)) addr |= R300_PTE_UNSNOOPED; + return addr; +} + +void rv370_pcie_gart_set_page(struct radeon_device *rdev, unsigned i, + uint64_t entry) +{ + void __iomem *ptr = rdev->gart.ptr; + /* on x86 we want this to be CPU endian, on powerpc * on powerpc without HW swappers, it'll get swapped on way * into VRAM - so no need for cpu_to_le32 on VRAM tables */ - writel(addr, ((void __iomem *)ptr) + (i * 4)); + writel(entry, ((void __iomem *)ptr) + (i * 4)); } int rv370_pcie_gart_init(struct radeon_device *rdev) @@ -109,6 +114,7 @@ int rv370_pcie_gart_init(struct radeon_device *rdev) DRM_ERROR("Failed to register debugfs file for PCIE gart !\n"); rdev->gart.table_size = rdev->gart.num_gpu_pages * 4; rdev->asic->gart.tlb_flush = &rv370_pcie_gart_tlb_flush; + rdev->asic->gart.get_page_entry = &rv370_pcie_gart_get_page_entry; rdev->asic->gart.set_page = &rv370_pcie_gart_set_page; return radeon_gart_table_vram_alloc(rdev); } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 54529b837afa..40c4c7aa9103 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -242,6 +242,7 @@ bool radeon_get_bios(struct radeon_device *rdev); * Dummy page */ struct radeon_dummy_page { + uint64_t entry; struct page *page; dma_addr_t addr; }; @@ -646,6 +647,7 @@ struct radeon_gart { unsigned table_size; struct page **pages; dma_addr_t *pages_addr; + uint64_t *pages_entry; bool ready; }; @@ -1847,8 +1849,9 @@ struct radeon_asic { /* gart */ struct { void (*tlb_flush)(struct radeon_device *rdev); + uint64_t (*get_page_entry)(uint64_t addr, uint32_t flags); void (*set_page)(struct radeon_device *rdev, unsigned i, - uint64_t addr, uint32_t flags); + uint64_t entry); } gart; struct { int (*init)(struct radeon_device *rdev); @@ -2852,7 +2855,8 @@ static inline void radeon_ring_write(struct radeon_ring *ring, uint32_t v) #define radeon_vga_set_state(rdev, state) (rdev)->asic->vga_set_state((rdev), (state)) #define radeon_asic_reset(rdev) (rdev)->asic->asic_reset((rdev)) #define radeon_gart_tlb_flush(rdev) (rdev)->asic->gart.tlb_flush((rdev)) -#define radeon_gart_set_page(rdev, i, p, f) (rdev)->asic->gart.set_page((rdev), (i), (p), (f)) +#define radeon_gart_get_page_entry(a, f) (rdev)->asic->gart.get_page_entry((a), (f)) +#define radeon_gart_set_page(rdev, i, e) (rdev)->asic->gart.set_page((rdev), (i), (e)) #define radeon_asic_vm_init(rdev) (rdev)->asic->vm.init((rdev)) #define radeon_asic_vm_fini(rdev) (rdev)->asic->vm.fini((rdev)) #define radeon_asic_vm_copy_pages(rdev, ib, pe, src, count) ((rdev)->asic->vm.copy_pages((rdev), (ib), (pe), (src), (count))) diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index 121aff6a3b41..ed0e10eee2dc 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -159,11 +159,13 @@ void radeon_agp_disable(struct radeon_device *rdev) DRM_INFO("Forcing AGP to PCIE mode\n"); rdev->flags |= RADEON_IS_PCIE; rdev->asic->gart.tlb_flush = &rv370_pcie_gart_tlb_flush; + rdev->asic->gart.get_page_entry = &rv370_pcie_gart_get_page_entry; rdev->asic->gart.set_page = &rv370_pcie_gart_set_page; } else { DRM_INFO("Forcing AGP to PCI mode\n"); rdev->flags |= RADEON_IS_PCI; rdev->asic->gart.tlb_flush = &r100_pci_gart_tlb_flush; + rdev->asic->gart.get_page_entry = &r100_pci_gart_get_page_entry; rdev->asic->gart.set_page = &r100_pci_gart_set_page; } rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; @@ -199,6 +201,7 @@ static struct radeon_asic r100_asic = { .mc_wait_for_idle = &r100_mc_wait_for_idle, .gart = { .tlb_flush = &r100_pci_gart_tlb_flush, + .get_page_entry = &r100_pci_gart_get_page_entry, .set_page = &r100_pci_gart_set_page, }, .ring = { @@ -265,6 +268,7 @@ static struct radeon_asic r200_asic = { .mc_wait_for_idle = &r100_mc_wait_for_idle, .gart = { .tlb_flush = &r100_pci_gart_tlb_flush, + .get_page_entry = &r100_pci_gart_get_page_entry, .set_page = &r100_pci_gart_set_page, }, .ring = { @@ -359,6 +363,7 @@ static struct radeon_asic r300_asic = { .mc_wait_for_idle = &r300_mc_wait_for_idle, .gart = { .tlb_flush = &r100_pci_gart_tlb_flush, + .get_page_entry = &r100_pci_gart_get_page_entry, .set_page = &r100_pci_gart_set_page, }, .ring = { @@ -425,6 +430,7 @@ static struct radeon_asic r300_asic_pcie = { .mc_wait_for_idle = &r300_mc_wait_for_idle, .gart = { .tlb_flush = &rv370_pcie_gart_tlb_flush, + .get_page_entry = &rv370_pcie_gart_get_page_entry, .set_page = &rv370_pcie_gart_set_page, }, .ring = { @@ -491,6 +497,7 @@ static struct radeon_asic r420_asic = { .mc_wait_for_idle = &r300_mc_wait_for_idle, .gart = { .tlb_flush = &rv370_pcie_gart_tlb_flush, + .get_page_entry = &rv370_pcie_gart_get_page_entry, .set_page = &rv370_pcie_gart_set_page, }, .ring = { @@ -557,6 +564,7 @@ static struct radeon_asic rs400_asic = { .mc_wait_for_idle = &rs400_mc_wait_for_idle, .gart = { .tlb_flush = &rs400_gart_tlb_flush, + .get_page_entry = &rs400_gart_get_page_entry, .set_page = &rs400_gart_set_page, }, .ring = { @@ -623,6 +631,7 @@ static struct radeon_asic rs600_asic = { .mc_wait_for_idle = &rs600_mc_wait_for_idle, .gart = { .tlb_flush = &rs600_gart_tlb_flush, + .get_page_entry = &rs600_gart_get_page_entry, .set_page = &rs600_gart_set_page, }, .ring = { @@ -691,6 +700,7 @@ static struct radeon_asic rs690_asic = { .mc_wait_for_idle = &rs690_mc_wait_for_idle, .gart = { .tlb_flush = &rs400_gart_tlb_flush, + .get_page_entry = &rs400_gart_get_page_entry, .set_page = &rs400_gart_set_page, }, .ring = { @@ -759,6 +769,7 @@ static struct radeon_asic rv515_asic = { .mc_wait_for_idle = &rv515_mc_wait_for_idle, .gart = { .tlb_flush = &rv370_pcie_gart_tlb_flush, + .get_page_entry = &rv370_pcie_gart_get_page_entry, .set_page = &rv370_pcie_gart_set_page, }, .ring = { @@ -825,6 +836,7 @@ static struct radeon_asic r520_asic = { .mc_wait_for_idle = &r520_mc_wait_for_idle, .gart = { .tlb_flush = &rv370_pcie_gart_tlb_flush, + .get_page_entry = &rv370_pcie_gart_get_page_entry, .set_page = &rv370_pcie_gart_set_page, }, .ring = { @@ -919,6 +931,7 @@ static struct radeon_asic r600_asic = { .get_gpu_clock_counter = &r600_get_gpu_clock_counter, .gart = { .tlb_flush = &r600_pcie_gart_tlb_flush, + .get_page_entry = &rs600_gart_get_page_entry, .set_page = &rs600_gart_set_page, }, .ring = { @@ -1004,6 +1017,7 @@ static struct radeon_asic rv6xx_asic = { .get_gpu_clock_counter = &r600_get_gpu_clock_counter, .gart = { .tlb_flush = &r600_pcie_gart_tlb_flush, + .get_page_entry = &rs600_gart_get_page_entry, .set_page = &rs600_gart_set_page, }, .ring = { @@ -1095,6 +1109,7 @@ static struct radeon_asic rs780_asic = { .get_gpu_clock_counter = &r600_get_gpu_clock_counter, .gart = { .tlb_flush = &r600_pcie_gart_tlb_flush, + .get_page_entry = &rs600_gart_get_page_entry, .set_page = &rs600_gart_set_page, }, .ring = { @@ -1199,6 +1214,7 @@ static struct radeon_asic rv770_asic = { .get_gpu_clock_counter = &r600_get_gpu_clock_counter, .gart = { .tlb_flush = &r600_pcie_gart_tlb_flush, + .get_page_entry = &rs600_gart_get_page_entry, .set_page = &rs600_gart_set_page, }, .ring = { @@ -1317,6 +1333,7 @@ static struct radeon_asic evergreen_asic = { .get_gpu_clock_counter = &r600_get_gpu_clock_counter, .gart = { .tlb_flush = &evergreen_pcie_gart_tlb_flush, + .get_page_entry = &rs600_gart_get_page_entry, .set_page = &rs600_gart_set_page, }, .ring = { @@ -1409,6 +1426,7 @@ static struct radeon_asic sumo_asic = { .get_gpu_clock_counter = &r600_get_gpu_clock_counter, .gart = { .tlb_flush = &evergreen_pcie_gart_tlb_flush, + .get_page_entry = &rs600_gart_get_page_entry, .set_page = &rs600_gart_set_page, }, .ring = { @@ -1500,6 +1518,7 @@ static struct radeon_asic btc_asic = { .get_gpu_clock_counter = &r600_get_gpu_clock_counter, .gart = { .tlb_flush = &evergreen_pcie_gart_tlb_flush, + .get_page_entry = &rs600_gart_get_page_entry, .set_page = &rs600_gart_set_page, }, .ring = { @@ -1635,6 +1654,7 @@ static struct radeon_asic cayman_asic = { .get_gpu_clock_counter = &r600_get_gpu_clock_counter, .gart = { .tlb_flush = &cayman_pcie_gart_tlb_flush, + .get_page_entry = &rs600_gart_get_page_entry, .set_page = &rs600_gart_set_page, }, .vm = { @@ -1738,6 +1758,7 @@ static struct radeon_asic trinity_asic = { .get_gpu_clock_counter = &r600_get_gpu_clock_counter, .gart = { .tlb_flush = &cayman_pcie_gart_tlb_flush, + .get_page_entry = &rs600_gart_get_page_entry, .set_page = &rs600_gart_set_page, }, .vm = { @@ -1871,6 +1892,7 @@ static struct radeon_asic si_asic = { .get_gpu_clock_counter = &si_get_gpu_clock_counter, .gart = { .tlb_flush = &si_pcie_gart_tlb_flush, + .get_page_entry = &rs600_gart_get_page_entry, .set_page = &rs600_gart_set_page, }, .vm = { @@ -2032,6 +2054,7 @@ static struct radeon_asic ci_asic = { .get_gpu_clock_counter = &cik_get_gpu_clock_counter, .gart = { .tlb_flush = &cik_pcie_gart_tlb_flush, + .get_page_entry = &rs600_gart_get_page_entry, .set_page = &rs600_gart_set_page, }, .vm = { @@ -2139,6 +2162,7 @@ static struct radeon_asic kv_asic = { .get_gpu_clock_counter = &cik_get_gpu_clock_counter, .gart = { .tlb_flush = &cik_pcie_gart_tlb_flush, + .get_page_entry = &rs600_gart_get_page_entry, .set_page = &rs600_gart_set_page, }, .vm = { diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 2a45d548d5ec..8d787d115653 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -67,8 +67,9 @@ bool r100_gpu_is_lockup(struct radeon_device *rdev, struct radeon_ring *cp); int r100_asic_reset(struct radeon_device *rdev); u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc); void r100_pci_gart_tlb_flush(struct radeon_device *rdev); +uint64_t r100_pci_gart_get_page_entry(uint64_t addr, uint32_t flags); void r100_pci_gart_set_page(struct radeon_device *rdev, unsigned i, - uint64_t addr, uint32_t flags); + uint64_t entry); void r100_ring_start(struct radeon_device *rdev, struct radeon_ring *ring); int r100_irq_set(struct radeon_device *rdev); int r100_irq_process(struct radeon_device *rdev); @@ -172,8 +173,9 @@ extern void r300_fence_ring_emit(struct radeon_device *rdev, struct radeon_fence *fence); extern int r300_cs_parse(struct radeon_cs_parser *p); extern void rv370_pcie_gart_tlb_flush(struct radeon_device *rdev); +extern uint64_t rv370_pcie_gart_get_page_entry(uint64_t addr, uint32_t flags); extern void rv370_pcie_gart_set_page(struct radeon_device *rdev, unsigned i, - uint64_t addr, uint32_t flags); + uint64_t entry); extern void rv370_set_pcie_lanes(struct radeon_device *rdev, int lanes); extern int rv370_get_pcie_lanes(struct radeon_device *rdev); extern void r300_set_reg_safe(struct radeon_device *rdev); @@ -208,8 +210,9 @@ extern void rs400_fini(struct radeon_device *rdev); extern int rs400_suspend(struct radeon_device *rdev); extern int rs400_resume(struct radeon_device *rdev); void rs400_gart_tlb_flush(struct radeon_device *rdev); +uint64_t rs400_gart_get_page_entry(uint64_t addr, uint32_t flags); void rs400_gart_set_page(struct radeon_device *rdev, unsigned i, - uint64_t addr, uint32_t flags); + uint64_t entry); uint32_t rs400_mc_rreg(struct radeon_device *rdev, uint32_t reg); void rs400_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v); int rs400_gart_init(struct radeon_device *rdev); @@ -232,8 +235,9 @@ int rs600_irq_process(struct radeon_device *rdev); void rs600_irq_disable(struct radeon_device *rdev); u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc); void rs600_gart_tlb_flush(struct radeon_device *rdev); +uint64_t rs600_gart_get_page_entry(uint64_t addr, uint32_t flags); void rs600_gart_set_page(struct radeon_device *rdev, unsigned i, - uint64_t addr, uint32_t flags); + uint64_t entry); uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg); void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v); void rs600_bandwidth_update(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 0ec65168f331..bd7519fdd3f4 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -774,6 +774,8 @@ int radeon_dummy_page_init(struct radeon_device *rdev) rdev->dummy_page.page = NULL; return -ENOMEM; } + rdev->dummy_page.entry = radeon_gart_get_page_entry(rdev->dummy_page.addr, + RADEON_GART_PAGE_DUMMY); return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 84146d5901aa..a530932c7654 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -228,7 +228,6 @@ void radeon_gart_unbind(struct radeon_device *rdev, unsigned offset, unsigned t; unsigned p; int i, j; - u64 page_base; if (!rdev->gart.ready) { WARN(1, "trying to unbind memory from uninitialized GART !\n"); @@ -240,13 +239,12 @@ void radeon_gart_unbind(struct radeon_device *rdev, unsigned offset, if (rdev->gart.pages[p]) { rdev->gart.pages[p] = NULL; rdev->gart.pages_addr[p] = rdev->dummy_page.addr; - page_base = rdev->gart.pages_addr[p]; for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) { + rdev->gart.pages_entry[t] = rdev->dummy_page.entry; if (rdev->gart.ptr) { - radeon_gart_set_page(rdev, t, page_base, - RADEON_GART_PAGE_DUMMY); + radeon_gart_set_page(rdev, t, + rdev->dummy_page.entry); } - page_base += RADEON_GPU_PAGE_SIZE; } } } @@ -274,7 +272,7 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset, { unsigned t; unsigned p; - uint64_t page_base; + uint64_t page_base, page_entry; int i, j; if (!rdev->gart.ready) { @@ -287,12 +285,14 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset, for (i = 0; i < pages; i++, p++) { rdev->gart.pages_addr[p] = dma_addr[i]; rdev->gart.pages[p] = pagelist[i]; - if (rdev->gart.ptr) { - page_base = rdev->gart.pages_addr[p]; - for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) { - radeon_gart_set_page(rdev, t, page_base, flags); - page_base += RADEON_GPU_PAGE_SIZE; + page_base = dma_addr[i]; + for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) { + page_entry = radeon_gart_get_page_entry(page_base, flags); + rdev->gart.pages_entry[t] = page_entry; + if (rdev->gart.ptr) { + radeon_gart_set_page(rdev, t, page_entry); } + page_base += RADEON_GPU_PAGE_SIZE; } } mb(); @@ -340,10 +340,17 @@ int radeon_gart_init(struct radeon_device *rdev) radeon_gart_fini(rdev); return -ENOMEM; } + rdev->gart.pages_entry = vmalloc(sizeof(uint64_t) * + rdev->gart.num_gpu_pages); + if (rdev->gart.pages_entry == NULL) { + radeon_gart_fini(rdev); + return -ENOMEM; + } /* set GART entry to point to the dummy page by default */ - for (i = 0; i < rdev->gart.num_cpu_pages; i++) { + for (i = 0; i < rdev->gart.num_cpu_pages; i++) rdev->gart.pages_addr[i] = rdev->dummy_page.addr; - } + for (i = 0; i < rdev->gart.num_gpu_pages; i++) + rdev->gart.pages_entry[i] = rdev->dummy_page.entry; return 0; } @@ -356,15 +363,17 @@ int radeon_gart_init(struct radeon_device *rdev) */ void radeon_gart_fini(struct radeon_device *rdev) { - if (rdev->gart.pages && rdev->gart.pages_addr && rdev->gart.ready) { + if (rdev->gart.ready) { /* unbind pages */ radeon_gart_unbind(rdev, 0, rdev->gart.num_cpu_pages); } rdev->gart.ready = false; vfree(rdev->gart.pages); vfree(rdev->gart.pages_addr); + vfree(rdev->gart.pages_entry); rdev->gart.pages = NULL; rdev->gart.pages_addr = NULL; + rdev->gart.pages_entry = NULL; radeon_dummy_page_fini(rdev); } diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index c5799f16aa4b..34e3235f41d2 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -212,11 +212,9 @@ void rs400_gart_fini(struct radeon_device *rdev) #define RS400_PTE_WRITEABLE (1 << 2) #define RS400_PTE_READABLE (1 << 3) -void rs400_gart_set_page(struct radeon_device *rdev, unsigned i, - uint64_t addr, uint32_t flags) +uint64_t rs400_gart_get_page_entry(uint64_t addr, uint32_t flags) { uint32_t entry; - u32 *gtt = rdev->gart.ptr; entry = (lower_32_bits(addr) & PAGE_MASK) | ((upper_32_bits(addr) & 0xff) << 4); @@ -226,8 +224,14 @@ void rs400_gart_set_page(struct radeon_device *rdev, unsigned i, entry |= RS400_PTE_WRITEABLE; if (!(flags & RADEON_GART_PAGE_SNOOP)) entry |= RS400_PTE_UNSNOOPED; - entry = cpu_to_le32(entry); - gtt[i] = entry; + return entry; +} + +void rs400_gart_set_page(struct radeon_device *rdev, unsigned i, + uint64_t entry) +{ + u32 *gtt = rdev->gart.ptr; + gtt[i] = cpu_to_le32(lower_32_bits(entry)); } int rs400_mc_wait_for_idle(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 9acb1c3c005b..74bce91aecc1 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -625,11 +625,8 @@ static void rs600_gart_fini(struct radeon_device *rdev) radeon_gart_table_vram_free(rdev); } -void rs600_gart_set_page(struct radeon_device *rdev, unsigned i, - uint64_t addr, uint32_t flags) +uint64_t rs600_gart_get_page_entry(uint64_t addr, uint32_t flags) { - void __iomem *ptr = (void *)rdev->gart.ptr; - addr = addr & 0xFFFFFFFFFFFFF000ULL; addr |= R600_PTE_SYSTEM; if (flags & RADEON_GART_PAGE_VALID) @@ -640,7 +637,14 @@ void rs600_gart_set_page(struct radeon_device *rdev, unsigned i, addr |= R600_PTE_WRITEABLE; if (flags & RADEON_GART_PAGE_SNOOP) addr |= R600_PTE_SNOOPED; - writeq(addr, ptr + (i * 8)); + return addr; +} + +void rs600_gart_set_page(struct radeon_device *rdev, unsigned i, + uint64_t entry) +{ + void __iomem *ptr = (void *)rdev->gart.ptr; + writeq(entry, ptr + (i * 8)); } int rs600_irq_set(struct radeon_device *rdev) -- cgit v1.2.3 From 5636d2f842c7bd7800002868ead3d6b809d385a0 Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Thu, 22 Jan 2015 18:58:46 +0900 Subject: drm/radeon: Restore GART table contents after pinning it in VRAM v3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The GART table BO has to be moved out of VRAM for suspend/resume. Any updates to the GART table during that time were silently dropped without this change. This caused GPU lockups on resume in some cases, see the bug reports referenced below. This might also make GPU reset more robust in some cases, as we no longer rely on the GART table in VRAM being preserved across the GPU lockup/reset. v2: Add logic to radeon_gart_table_vram_pin directly instead of reinstating radeon_gart_restore v3: Move code after assignment of rdev->gart.table_addr so that the GART TLB flush can work as intended, add code comment explaining why we're doing this Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85204 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86267 Reviewed-by: Christian König Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_gart.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index a530932c7654..c7be612b60c9 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -165,6 +165,19 @@ int radeon_gart_table_vram_pin(struct radeon_device *rdev) radeon_bo_unpin(rdev->gart.robj); radeon_bo_unreserve(rdev->gart.robj); rdev->gart.table_addr = gpu_addr; + + if (!r) { + int i; + + /* We might have dropped some GART table updates while it wasn't + * mapped, restore all entries + */ + for (i = 0; i < rdev->gart.num_gpu_pages; i++) + radeon_gart_set_page(rdev, i, rdev->gart.pages_entry[i]); + mb(); + radeon_gart_tlb_flush(rdev); + } + return r; } -- cgit v1.2.3 From 16653dbae06609b9d0a7427de6c7f4c98d76523c Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Wed, 21 Jan 2015 17:36:37 +0900 Subject: drm/radeon: Remove rdev->gart.pages_addr array MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit radeon_vm_map_gart can use rdev->gart.pages_entry instead. Also move the masking of the page address to radeon_vm_map_gart from its callers. Reviewed-by: Christian König Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/cik_sdma.c | 1 - drivers/gpu/drm/radeon/ni_dma.c | 1 - drivers/gpu/drm/radeon/radeon.h | 1 - drivers/gpu/drm/radeon/radeon_gart.c | 12 ------------ drivers/gpu/drm/radeon/radeon_vm.c | 6 ++---- drivers/gpu/drm/radeon/si_dma.c | 1 - 6 files changed, 2 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/cik_sdma.c b/drivers/gpu/drm/radeon/cik_sdma.c index a0133c74f4cf..42cd0cffe210 100644 --- a/drivers/gpu/drm/radeon/cik_sdma.c +++ b/drivers/gpu/drm/radeon/cik_sdma.c @@ -816,7 +816,6 @@ void cik_sdma_vm_write_pages(struct radeon_device *rdev, for (; ndw > 0; ndw -= 2, --count, pe += 8) { if (flags & R600_PTE_SYSTEM) { value = radeon_vm_map_gart(rdev, addr); - value &= 0xFFFFFFFFFFFFF000ULL; } else if (flags & R600_PTE_VALID) { value = addr; } else { diff --git a/drivers/gpu/drm/radeon/ni_dma.c b/drivers/gpu/drm/radeon/ni_dma.c index 4be2bb7cbef3..ce787a9f12c0 100644 --- a/drivers/gpu/drm/radeon/ni_dma.c +++ b/drivers/gpu/drm/radeon/ni_dma.c @@ -372,7 +372,6 @@ void cayman_dma_vm_write_pages(struct radeon_device *rdev, for (; ndw > 0; ndw -= 2, --count, pe += 8) { if (flags & R600_PTE_SYSTEM) { value = radeon_vm_map_gart(rdev, addr); - value &= 0xFFFFFFFFFFFFF000ULL; } else if (flags & R600_PTE_VALID) { value = addr; } else { diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 40c4c7aa9103..3f2a8d3febca 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -646,7 +646,6 @@ struct radeon_gart { unsigned num_cpu_pages; unsigned table_size; struct page **pages; - dma_addr_t *pages_addr; uint64_t *pages_entry; bool ready; }; diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index c7be612b60c9..5450fa95a47e 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -251,7 +251,6 @@ void radeon_gart_unbind(struct radeon_device *rdev, unsigned offset, for (i = 0; i < pages; i++, p++) { if (rdev->gart.pages[p]) { rdev->gart.pages[p] = NULL; - rdev->gart.pages_addr[p] = rdev->dummy_page.addr; for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) { rdev->gart.pages_entry[t] = rdev->dummy_page.entry; if (rdev->gart.ptr) { @@ -296,7 +295,6 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset, p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); for (i = 0; i < pages; i++, p++) { - rdev->gart.pages_addr[p] = dma_addr[i]; rdev->gart.pages[p] = pagelist[i]; page_base = dma_addr[i]; for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) { @@ -347,12 +345,6 @@ int radeon_gart_init(struct radeon_device *rdev) radeon_gart_fini(rdev); return -ENOMEM; } - rdev->gart.pages_addr = vzalloc(sizeof(dma_addr_t) * - rdev->gart.num_cpu_pages); - if (rdev->gart.pages_addr == NULL) { - radeon_gart_fini(rdev); - return -ENOMEM; - } rdev->gart.pages_entry = vmalloc(sizeof(uint64_t) * rdev->gart.num_gpu_pages); if (rdev->gart.pages_entry == NULL) { @@ -360,8 +352,6 @@ int radeon_gart_init(struct radeon_device *rdev) return -ENOMEM; } /* set GART entry to point to the dummy page by default */ - for (i = 0; i < rdev->gart.num_cpu_pages; i++) - rdev->gart.pages_addr[i] = rdev->dummy_page.addr; for (i = 0; i < rdev->gart.num_gpu_pages; i++) rdev->gart.pages_entry[i] = rdev->dummy_page.entry; return 0; @@ -382,10 +372,8 @@ void radeon_gart_fini(struct radeon_device *rdev) } rdev->gart.ready = false; vfree(rdev->gart.pages); - vfree(rdev->gart.pages_addr); vfree(rdev->gart.pages_entry); rdev->gart.pages = NULL; - rdev->gart.pages_addr = NULL; rdev->gart.pages_entry = NULL; radeon_dummy_page_fini(rdev); diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c index cde48c42b30a..06d2246d07f1 100644 --- a/drivers/gpu/drm/radeon/radeon_vm.c +++ b/drivers/gpu/drm/radeon/radeon_vm.c @@ -587,10 +587,8 @@ uint64_t radeon_vm_map_gart(struct radeon_device *rdev, uint64_t addr) uint64_t result; /* page table offset */ - result = rdev->gart.pages_addr[addr >> PAGE_SHIFT]; - - /* in case cpu page size != gpu page size*/ - result |= addr & (~PAGE_MASK); + result = rdev->gart.pages_entry[addr >> RADEON_GPU_PAGE_SHIFT]; + result &= ~RADEON_GPU_PAGE_MASK; return result; } diff --git a/drivers/gpu/drm/radeon/si_dma.c b/drivers/gpu/drm/radeon/si_dma.c index aa7b872b2c43..83207929fc62 100644 --- a/drivers/gpu/drm/radeon/si_dma.c +++ b/drivers/gpu/drm/radeon/si_dma.c @@ -123,7 +123,6 @@ void si_dma_vm_write_pages(struct radeon_device *rdev, for (; ndw > 0; ndw -= 2, --count, pe += 8) { if (flags & R600_PTE_SYSTEM) { value = radeon_vm_map_gart(rdev, addr); - value &= 0xFFFFFFFFFFFFF000ULL; } else if (flags & R600_PTE_VALID) { value = addr; } else { -- cgit v1.2.3 From 1d90d6d5522befa8efa1a7ea406be65cf865ded4 Mon Sep 17 00:00:00 2001 From: Jochen Hein Date: Thu, 22 Jan 2015 12:03:15 -0800 Subject: Input: i8042 - add noloop quirk for Medion Akoya E7225 (MD98857) Without this the aux port does not get detected, and consequently the touchpad will not work. With this patch the touchpad is detected: $ dmesg | grep -E "(SYN|i8042|serio)" pnp 00:03: Plug and Play ACPI device, IDs SYN1d22 PNP0f13 (active) i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2863, fw id: 1473085 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 dmidecode excerpt for this laptop is: Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Medion Product Name: Akoya E7225 Version: 1.0 Cc: stable@vger.kernel.org Signed-off-by: Jochen Hein Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 764857b4e268..c11556563ef0 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -151,6 +151,14 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "5a"), }, }, + { + /* Medion Akoya E7225 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Medion"), + DMI_MATCH(DMI_PRODUCT_NAME, "Akoya E7225"), + DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"), + }, + }, { /* Blue FB5601 */ .matches = { -- cgit v1.2.3 From 2541f7f4c14e2198ed8d8c61c854b86cae238cf1 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 19 Jan 2015 17:22:55 +0100 Subject: i2c: slave-eeprom: fix boundary check when using sysfs Due to a copy&paste error, the last byte of the shared memory was not accessible via sysfs. Reported-by: Debora Grosse Signed-off-by: Wolfram Sang Acked-by: Laurent Pinchart Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-slave-eeprom.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c index 6631400b5f02..cf9b09db092f 100644 --- a/drivers/i2c/i2c-slave-eeprom.c +++ b/drivers/i2c/i2c-slave-eeprom.c @@ -74,7 +74,7 @@ static ssize_t i2c_slave_eeprom_bin_read(struct file *filp, struct kobject *kobj struct eeprom_data *eeprom; unsigned long flags; - if (off + count >= attr->size) + if (off + count > attr->size) return -EFBIG; eeprom = dev_get_drvdata(container_of(kobj, struct device, kobj)); @@ -92,7 +92,7 @@ static ssize_t i2c_slave_eeprom_bin_write(struct file *filp, struct kobject *kob struct eeprom_data *eeprom; unsigned long flags; - if (off + count >= attr->size) + if (off + count > attr->size) return -EFBIG; eeprom = dev_get_drvdata(container_of(kobj, struct device, kobj)); -- cgit v1.2.3 From 34e81ad5f0b60007c95995eb7803da7e00c6c611 Mon Sep 17 00:00:00 2001 From: Paul Osmialowski Date: Mon, 19 Jan 2015 17:03:33 +0100 Subject: i2c: s3c2410: fix ABBA deadlock by keeping clock prepared This patch solves deadlock between clock prepare mutex and regmap mutex reported by Tomasz Figa in [1] by implementing solution from [2]: "always leave the clock of the i2c controller in a prepared state". [1] https://lkml.org/lkml/2014/7/2/171 [2] https://lkml.org/lkml/2014/7/2/207 On each i2c transfer handled by s3c24xx_i2c_xfer(), clk_prepare_enable() was called, which calls clk_prepare() then clk_enable(). clk_prepare() takes prepare_lock mutex before proceeding. Note that i2c transfer functions are invoked from many places in kernel, typically with some other additional lock held. It may happen that function on CPU1 (e.g. regmap_update_bits()) has taken a mutex (i.e. regmap lock mutex) then it attempts i2c communication in order to proceed (so it needs to obtain clock related prepare_lock mutex during transfer preparation stage due to clk_prepare() call). At the same time other task on CPU0 wants to operate on clock (e.g. to (un)prepare clock for some other reason) so it has taken prepare_lock mutex. CPU0: CPU1: clk_disable_unused() regulator_disable() clk_prepare_lock() map->lock(map->lock_arg) regmap_read() s3c24xx_i2c_xfer() map->lock(map->lock_arg) clk_prepare_lock() Implemented solution from [2] leaves i2c clock prepared. Preparation is done in s3c24xx_i2c_probe() function. Without this patch, it is immediately unprepared by clk_disable_unprepare() call. I've replaced this call with clk_disable() and I've added clk_unprepare() call in s3c24xx_i2c_remove(). The s3c24xx_i2c_xfer() function now uses clk_enable() instead of clk_prepare_enable() (and clk_disable() instead of clk_unprepare_disable()). Signed-off-by: Paul Osmialowski Reviewed-by: Krzysztof Kozlowski Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-s3c2410.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index bff20a589621..958c8db4ec30 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -785,14 +785,16 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, int ret; pm_runtime_get_sync(&adap->dev); - clk_prepare_enable(i2c->clk); + ret = clk_enable(i2c->clk); + if (ret) + return ret; for (retry = 0; retry < adap->retries; retry++) { ret = s3c24xx_i2c_doxfer(i2c, msgs, num); if (ret != -EAGAIN) { - clk_disable_unprepare(i2c->clk); + clk_disable(i2c->clk); pm_runtime_put(&adap->dev); return ret; } @@ -802,7 +804,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, udelay(100); } - clk_disable_unprepare(i2c->clk); + clk_disable(i2c->clk); pm_runtime_put(&adap->dev); return -EREMOTEIO; } @@ -1197,7 +1199,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) clk_prepare_enable(i2c->clk); ret = s3c24xx_i2c_init(i2c); - clk_disable_unprepare(i2c->clk); + clk_disable(i2c->clk); if (ret != 0) { dev_err(&pdev->dev, "I2C controller init failed\n"); return ret; @@ -1210,6 +1212,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) i2c->irq = ret = platform_get_irq(pdev, 0); if (ret <= 0) { dev_err(&pdev->dev, "cannot find IRQ\n"); + clk_unprepare(i2c->clk); return ret; } @@ -1218,6 +1221,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) if (ret != 0) { dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq); + clk_unprepare(i2c->clk); return ret; } } @@ -1225,6 +1229,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) ret = s3c24xx_i2c_register_cpufreq(i2c); if (ret < 0) { dev_err(&pdev->dev, "failed to register cpufreq notifier\n"); + clk_unprepare(i2c->clk); return ret; } @@ -1241,6 +1246,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) if (ret < 0) { dev_err(&pdev->dev, "failed to add bus to i2c core\n"); s3c24xx_i2c_deregister_cpufreq(i2c); + clk_unprepare(i2c->clk); return ret; } @@ -1262,6 +1268,8 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) { struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev); + clk_unprepare(i2c->clk); + pm_runtime_disable(&i2c->adap.dev); pm_runtime_disable(&pdev->dev); @@ -1293,13 +1301,16 @@ static int s3c24xx_i2c_resume_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev); + int ret; if (!IS_ERR(i2c->sysreg)) regmap_write(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, i2c->sys_i2c_cfg); - clk_prepare_enable(i2c->clk); + ret = clk_enable(i2c->clk); + if (ret) + return ret; s3c24xx_i2c_init(i2c); - clk_disable_unprepare(i2c->clk); + clk_disable(i2c->clk); i2c->suspended = 0; return 0; -- cgit v1.2.3 From 2b7ded0fb63ef7ce63d25aef4114a0ad629a9e60 Mon Sep 17 00:00:00 2001 From: Marc Dietrich Date: Tue, 20 Jan 2015 23:01:28 +0100 Subject: staging: nvec: specify a platform-device base id commit 6e3f62f079 (mfd: core: Fix platform-device id generation) modified the computation of the mfd cell id. Negative numbers forbit the specification of cell ids as we do. Fix this for now by specifying a base of 0 instead. In the long run, this may be changed to automatic cell ids (base -2). Fixes: 6e3f62f079 Reported-by: Misha Komarovskiy Signed-off-by: Marc Dietrich Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index 093535c6217b..120b70d72d79 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -85,23 +85,20 @@ static struct nvec_chip *nvec_power_handle; static const struct mfd_cell nvec_devices[] = { { .name = "nvec-kbd", - .id = 1, }, { .name = "nvec-mouse", - .id = 1, }, { .name = "nvec-power", - .id = 1, + .id = 0, }, { .name = "nvec-power", - .id = 2, + .id = 1, }, { .name = "nvec-paz00", - .id = 1, }, }; @@ -891,7 +888,7 @@ static int tegra_nvec_probe(struct platform_device *pdev) nvec_msg_free(nvec, msg); } - ret = mfd_add_devices(nvec->dev, -1, nvec_devices, + ret = mfd_add_devices(nvec->dev, 0, nvec_devices, ARRAY_SIZE(nvec_devices), NULL, 0, NULL); if (ret) dev_err(nvec->dev, "error adding subdevices\n"); -- cgit v1.2.3 From 26713c81231363c07cbd0f7392a8c94d7ba8e61c Mon Sep 17 00:00:00 2001 From: Lars Poeschel Date: Wed, 14 Jan 2015 11:25:49 +0100 Subject: drivers/Kconfig: remove duplicate entry for soc For some reason there was the same menu entry in menuconfig twice. This trivial patch leaves the one that is older as is and removes the other entry. Signed-off-by: Lars Poeschel Signed-off-by: Pramod Gurav Acked-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman --- drivers/Kconfig | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/Kconfig b/drivers/Kconfig index 694d5a70d6ce..c70d6e45dc10 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -134,8 +134,6 @@ source "drivers/staging/Kconfig" source "drivers/platform/Kconfig" -source "drivers/soc/Kconfig" - source "drivers/clk/Kconfig" source "drivers/hwspinlock/Kconfig" -- cgit v1.2.3 From a7a34d02675ab291144fea4c15ac874b3244d41e Mon Sep 17 00:00:00 2001 From: Mark Knibbs Date: Mon, 19 Jan 2015 17:42:10 +0000 Subject: storage: Revise/fix quirk for 04E6:000F SCM USB-SCSI converter I recently posted a patch ("storage: Add quirk for another SCM-based USB-SCSI converter") to add a quirk for the converter with ID 04E6:000F, which is listed along with 04E6:000B in the Windows INF file for the Startech ICUSBSCSI2 as "eUSB SCSI Adapter (Bus Powered)". The already-present quirk for 04E6:000B has USB_SC_SCSI/USB_PR_BULK, not USB_SC_DEVICE/USB_PR_DEVICE. Change the 04E6:000F quirk to match that, since it will probably be required. Signed-off-by: Mark Knibbs Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 11c7a9676441..bfc4a6aedf74 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -507,7 +507,7 @@ UNUSUAL_DEV( 0x04e6, 0x000c, 0x0100, 0x0100, UNUSUAL_DEV( 0x04e6, 0x000f, 0x0000, 0x9999, "SCM Microsystems", "eUSB SCSI Adapter (Bus Powered)", - USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, -- cgit v1.2.3 From 8a870880bd6f17b7ccef69a6432ab8df8775fcf6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 12 Jan 2015 13:34:33 +0100 Subject: uas: Add no-report-opcodes quirk for Simpletech devices with id 4971:8017 Like some other uas devices these devices hang when a report-opcodes scsi command is send to them. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1124119 Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 6df4357d9ee3..dbc00e56c7f5 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -140,3 +140,10 @@ UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999, "External HDD", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_UAS), + +/* Reported-by: Richard Henderson */ +UNUSUAL_DEV(0x4971, 0x8017, 0x0000, 0x9999, + "SimpleTech", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_OPCODES), -- cgit v1.2.3 From bf5c4136fa5ce471bdbf4cf59a813e32755fd014 Mon Sep 17 00:00:00 2001 From: Dmitry Nezhevenko Date: Mon, 12 Jan 2015 19:13:01 +0200 Subject: usb-storage/SCSI: blacklist FUA on JMicron 152d:2566 USB-SATA controller It looks like FUA support is broken on JMicron 152d:2566 bridge: [223159.885704] sd 7:0:0:0: [sdc] Write Protect is off [223159.885706] sd 7:0:0:0: [sdc] Mode Sense: 47 00 10 08 [223159.885942] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [223283.691677] sd 7:0:0:0: [sdc] [223283.691680] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [223283.691681] sd 7:0:0:0: [sdc] [223283.691682] Sense Key : Illegal Request [current] [223283.691684] sd 7:0:0:0: [sdc] [223283.691685] Add. Sense: Invalid field in cdb [223283.691686] sd 7:0:0:0: [sdc] CDB: [223283.691687] Write(10): 2a 08 15 d0 83 0d 00 00 01 00 [223283.691690] blk_update_request: critical target error, dev sdc, sector 2927892584 This patch adds blacklist flag so that sd will not use FUA Signed-off-by: Dmitry Nezhevenko Cc: Phil Dibowitz Cc: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index bfc4a6aedf74..d684b4b8108f 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1995,6 +1995,13 @@ UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), +/* Reported by Dmitry Nezhevenko */ +UNUSUAL_DEV( 0x152d, 0x2566, 0x0114, 0x0114, + "JMicron", + "USB to ATA/ATAPI Bridge", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BROKEN_FUA ), + /* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI) * and Mac USB Dock USB-SCSI */ UNUSUAL_DEV( 0x1645, 0x0007, 0x0100, 0x0133, -- cgit v1.2.3 From e5dff0e80463cc3fa236e898ef1491b40be70b19 Mon Sep 17 00:00:00 2001 From: Macpaul Lin Date: Fri, 23 Jan 2015 14:39:02 +0800 Subject: USB: Add OTG PET device to TPL OTG device shall support this device for allowing compliance automated testing. The modification is derived from Pavankumar and Vijayavardhans' previous work. Signed-off-by: Macpaul Lin Cc: Pavankumar Kondeti Cc: Vijayavardhan Vennapusa Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/otg_whitelist.h | 5 +++++ drivers/usb/core/quirks.c | 4 ++++ 2 files changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/otg_whitelist.h b/drivers/usb/core/otg_whitelist.h index de0c9c9d7091..a6315abe7b7c 100644 --- a/drivers/usb/core/otg_whitelist.h +++ b/drivers/usb/core/otg_whitelist.h @@ -55,6 +55,11 @@ static int is_targeted(struct usb_device *dev) le16_to_cpu(dev->descriptor.idProduct) == 0xbadd)) return 0; + /* OTG PET device is always targeted (see OTG 2.0 ECN 6.4.2) */ + if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a && + le16_to_cpu(dev->descriptor.idProduct) == 0x0200)) + return 1; + /* NOTE: can't use usb_match_id() since interface caches * aren't set up yet. this is cut/paste from that code. */ diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 0ffb4ed0a945..41e510ae8c83 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -179,6 +179,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0b05, 0x17e0), .driver_info = USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Protocol and OTG Electrical Test Device */ + { USB_DEVICE(0x1a0a, 0x0200), .driver_info = + USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + { } /* terminating entry must be last */ }; -- cgit v1.2.3 From 3d009c8c61f96b50c068c8122e929352c359f877 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 16 Jan 2015 14:50:50 -0800 Subject: gpio: omap: Fix bad device access with setup_irq() Similar to omap_gpio_irq_type() let's make sure that the GPIO is usable as an interrupt if the platform init code did not call gpio_request(). Otherwise we can get invalid device access after setup_irq(): WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x214/0x340() 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4CFG (Idle): Data Access in Supervisor mode during Functional access ... [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x244/0x530) [] (__setup_irq) from [] (setup_irq+0x40/0x8c) [] (setup_irq) from [] (omap_system_dma_probe+0x1d4/0x2b4) [] (omap_system_dma_probe) from [] (platform_drv_probe+0x44/0xa4) ... We can fix this the same way omap_gpio_irq_type() is handling it. Note that the long term solution is to change the gpio-omap driver to handle the banks as separate driver instances. This will allow us to rely on just runtime PM for tracking the bank specific state. Reported-by: Russell King Cc: Javier Martinez Canillas Cc: Kevin Hilman Cc: Santosh Shilimkar Tested-by: Felipe Balbi Signed-off-by: Tony Lindgren Signed-off-by: Linus Walleij --- drivers/gpio/gpio-omap.c | 39 +++++++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 30646cfe0efa..f476ae2eb0b3 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -88,6 +88,8 @@ struct gpio_bank { #define BANK_USED(bank) (bank->mod_usage || bank->irq_usage) #define LINE_USED(line, offset) (line & (BIT(offset))) +static void omap_gpio_unmask_irq(struct irq_data *d); + static int omap_irq_to_gpio(struct gpio_bank *bank, unsigned int gpio_irq) { return bank->chip.base + gpio_irq; @@ -477,6 +479,16 @@ static int omap_gpio_is_input(struct gpio_bank *bank, int mask) return readl_relaxed(reg) & mask; } +static void omap_gpio_init_irq(struct gpio_bank *bank, unsigned gpio, + unsigned offset) +{ + if (!LINE_USED(bank->mod_usage, offset)) { + omap_enable_gpio_module(bank, offset); + omap_set_gpio_direction(bank, offset, 1); + } + bank->irq_usage |= BIT(GPIO_INDEX(bank, gpio)); +} + static int omap_gpio_irq_type(struct irq_data *d, unsigned type) { struct gpio_bank *bank = omap_irq_data_get_bank(d); @@ -506,15 +518,11 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type) spin_lock_irqsave(&bank->lock, flags); offset = GPIO_INDEX(bank, gpio); retval = omap_set_gpio_triggering(bank, offset, type); - if (!LINE_USED(bank->mod_usage, offset)) { - omap_enable_gpio_module(bank, offset); - omap_set_gpio_direction(bank, offset, 1); - } else if (!omap_gpio_is_input(bank, BIT(offset))) { + omap_gpio_init_irq(bank, gpio, offset); + if (!omap_gpio_is_input(bank, BIT(offset))) { spin_unlock_irqrestore(&bank->lock, flags); return -EINVAL; } - - bank->irq_usage |= BIT(GPIO_INDEX(bank, gpio)); spin_unlock_irqrestore(&bank->lock, flags); if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) @@ -792,6 +800,24 @@ exit: pm_runtime_put(bank->dev); } +static unsigned int omap_gpio_irq_startup(struct irq_data *d) +{ + struct gpio_bank *bank = omap_irq_data_get_bank(d); + unsigned int gpio = omap_irq_to_gpio(bank, d->hwirq); + unsigned long flags; + unsigned offset = GPIO_INDEX(bank, gpio); + + if (!BANK_USED(bank)) + pm_runtime_get_sync(bank->dev); + + spin_lock_irqsave(&bank->lock, flags); + omap_gpio_init_irq(bank, gpio, offset); + spin_unlock_irqrestore(&bank->lock, flags); + omap_gpio_unmask_irq(d); + + return 0; +} + static void omap_gpio_irq_shutdown(struct irq_data *d) { struct gpio_bank *bank = omap_irq_data_get_bank(d); @@ -1181,6 +1207,7 @@ static int omap_gpio_probe(struct platform_device *pdev) if (!irqc) return -ENOMEM; + irqc->irq_startup = omap_gpio_irq_startup, irqc->irq_shutdown = omap_gpio_irq_shutdown, irqc->irq_ack = omap_gpio_ack_irq, irqc->irq_mask = omap_gpio_mask_irq, -- cgit v1.2.3 From b184c388f773f30b6c707d3d4599b2db80f4390c Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 20 Jan 2015 17:00:08 +0800 Subject: gpio: mcp23s08: handle default gpio base Create default gpio base if neither device node nor platform data is defined. Cc: Stable Signed-off-by: Sonic Zhang Reviewed-by: Alexandre Courbot Tested-by: Antonio Fiol Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mcp23s08.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c index da9c316059bc..eea5d7e578c9 100644 --- a/drivers/gpio/gpio-mcp23s08.c +++ b/drivers/gpio/gpio-mcp23s08.c @@ -801,9 +801,11 @@ static int mcp230xx_probe(struct i2c_client *client, client->irq = irq_of_parse_and_map(client->dev.of_node, 0); } else { pdata = dev_get_platdata(&client->dev); - if (!pdata || !gpio_is_valid(pdata->base)) { - dev_dbg(&client->dev, "invalid platform data\n"); - return -EINVAL; + if (!pdata) { + pdata = devm_kzalloc(&client->dev, + sizeof(struct mcp23s08_platform_data), + GFP_KERNEL); + pdata->base = -1; } } @@ -924,10 +926,11 @@ static int mcp23s08_probe(struct spi_device *spi) } else { type = spi_get_device_id(spi)->driver_data; pdata = dev_get_platdata(&spi->dev); - if (!pdata || !gpio_is_valid(pdata->base)) { - dev_dbg(&spi->dev, - "invalid or missing platform data\n"); - return -EINVAL; + if (!pdata) { + pdata = devm_kzalloc(&spi->dev, + sizeof(struct mcp23s08_platform_data), + GFP_KERNEL); + pdata->base = -1; } for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) { -- cgit v1.2.3 From a0b957f306fa4d0a39f4ffe5e5e25e856e6be46e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 16 Jan 2015 16:31:05 +0100 Subject: pinctrl: at91: allow to have disabled gpio bank Today we expect that all the bank are enabled, and count the number of banks used by the pinctrl based on it instead of using the last bank id enabled. So switch to it, set the chained IRQ at runtime based on enabled banks and wait only the number of enabled gpio controllers at probe time. Cc: # 3.18 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Ludovic Desroches Acked-by: Nicolas Ferre Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-at91.c | 108 +++++++++++++++++++++-------------------- 1 file changed, 55 insertions(+), 53 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index dfd021e8268f..f4cd0b9b2438 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -177,7 +177,7 @@ struct at91_pinctrl { struct device *dev; struct pinctrl_dev *pctl; - int nbanks; + int nactive_banks; uint32_t *mux_mask; int nmux; @@ -653,12 +653,18 @@ static int pin_check_config(struct at91_pinctrl *info, const char *name, int mux; /* check if it's a valid config */ - if (pin->bank >= info->nbanks) { + if (pin->bank >= gpio_banks) { dev_err(info->dev, "%s: pin conf %d bank_id %d >= nbanks %d\n", - name, index, pin->bank, info->nbanks); + name, index, pin->bank, gpio_banks); return -EINVAL; } + if (!gpio_chips[pin->bank]) { + dev_err(info->dev, "%s: pin conf %d bank_id %d not enabled\n", + name, index, pin->bank); + return -ENXIO; + } + if (pin->pin >= MAX_NB_GPIO_PER_BANK) { dev_err(info->dev, "%s: pin conf %d pin_bank_id %d >= %d\n", name, index, pin->pin, MAX_NB_GPIO_PER_BANK); @@ -981,7 +987,8 @@ static void at91_pinctrl_child_count(struct at91_pinctrl *info, for_each_child_of_node(np, child) { if (of_device_is_compatible(child, gpio_compat)) { - info->nbanks++; + if (of_device_is_available(child)) + info->nactive_banks++; } else { info->nfunctions++; info->ngroups += of_get_child_count(child); @@ -1003,11 +1010,11 @@ static int at91_pinctrl_mux_mask(struct at91_pinctrl *info, } size /= sizeof(*list); - if (!size || size % info->nbanks) { - dev_err(info->dev, "wrong mux mask array should be by %d\n", info->nbanks); + if (!size || size % gpio_banks) { + dev_err(info->dev, "wrong mux mask array should be by %d\n", gpio_banks); return -EINVAL; } - info->nmux = size / info->nbanks; + info->nmux = size / gpio_banks; info->mux_mask = devm_kzalloc(info->dev, sizeof(u32) * size, GFP_KERNEL); if (!info->mux_mask) { @@ -1131,7 +1138,7 @@ static int at91_pinctrl_probe_dt(struct platform_device *pdev, of_match_device(at91_pinctrl_of_match, &pdev->dev)->data; at91_pinctrl_child_count(info, np); - if (info->nbanks < 1) { + if (gpio_banks < 1) { dev_err(&pdev->dev, "you need to specify at least one gpio-controller\n"); return -EINVAL; } @@ -1144,7 +1151,7 @@ static int at91_pinctrl_probe_dt(struct platform_device *pdev, dev_dbg(&pdev->dev, "mux-mask\n"); tmp = info->mux_mask; - for (i = 0; i < info->nbanks; i++) { + for (i = 0; i < gpio_banks; i++) { for (j = 0; j < info->nmux; j++, tmp++) { dev_dbg(&pdev->dev, "%d:%d\t0x%x\n", i, j, tmp[0]); } @@ -1162,7 +1169,7 @@ static int at91_pinctrl_probe_dt(struct platform_device *pdev, if (!info->groups) return -ENOMEM; - dev_dbg(&pdev->dev, "nbanks = %d\n", info->nbanks); + dev_dbg(&pdev->dev, "nbanks = %d\n", gpio_banks); dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions); dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups); @@ -1185,7 +1192,7 @@ static int at91_pinctrl_probe(struct platform_device *pdev) { struct at91_pinctrl *info; struct pinctrl_pin_desc *pdesc; - int ret, i, j, k; + int ret, i, j, k, ngpio_chips_enabled = 0; info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (!info) @@ -1200,23 +1207,27 @@ static int at91_pinctrl_probe(struct platform_device *pdev) * to obtain references to the struct gpio_chip * for them, and we * need this to proceed. */ - for (i = 0; i < info->nbanks; i++) { - if (!gpio_chips[i]) { - dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i); - devm_kfree(&pdev->dev, info); - return -EPROBE_DEFER; - } + for (i = 0; i < gpio_banks; i++) + if (gpio_chips[i]) + ngpio_chips_enabled++; + + if (ngpio_chips_enabled < info->nactive_banks) { + dev_warn(&pdev->dev, + "All GPIO chips are not registered yet (%d/%d)\n", + ngpio_chips_enabled, info->nactive_banks); + devm_kfree(&pdev->dev, info); + return -EPROBE_DEFER; } at91_pinctrl_desc.name = dev_name(&pdev->dev); - at91_pinctrl_desc.npins = info->nbanks * MAX_NB_GPIO_PER_BANK; + at91_pinctrl_desc.npins = gpio_banks * MAX_NB_GPIO_PER_BANK; at91_pinctrl_desc.pins = pdesc = devm_kzalloc(&pdev->dev, sizeof(*pdesc) * at91_pinctrl_desc.npins, GFP_KERNEL); if (!at91_pinctrl_desc.pins) return -ENOMEM; - for (i = 0 , k = 0; i < info->nbanks; i++) { + for (i = 0, k = 0; i < gpio_banks; i++) { for (j = 0; j < MAX_NB_GPIO_PER_BANK; j++, k++) { pdesc->number = k; pdesc->name = kasprintf(GFP_KERNEL, "pio%c%d", i + 'A', j); @@ -1234,8 +1245,9 @@ static int at91_pinctrl_probe(struct platform_device *pdev) } /* We will handle a range of GPIO pins */ - for (i = 0; i < info->nbanks; i++) - pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range); + for (i = 0; i < gpio_banks; i++) + if (gpio_chips[i]) + pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range); dev_info(&pdev->dev, "initialized AT91 pinctrl driver\n"); @@ -1613,9 +1625,10 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) static int at91_gpio_of_irq_setup(struct platform_device *pdev, struct at91_gpio_chip *at91_gpio) { + struct gpio_chip *gpiochip_prev = NULL; struct at91_gpio_chip *prev = NULL; struct irq_data *d = irq_get_irq_data(at91_gpio->pioc_virq); - int ret; + int ret, i; at91_gpio->pioc_hwirq = irqd_to_hwirq(d); @@ -1641,24 +1654,33 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev, return ret; } - /* Setup chained handler */ - if (at91_gpio->pioc_idx) - prev = gpio_chips[at91_gpio->pioc_idx - 1]; - /* The top level handler handles one bank of GPIOs, except * on some SoC it can handle up to three... * We only set up the handler for the first of the list. */ - if (prev && prev->next == at91_gpio) + gpiochip_prev = irq_get_handler_data(at91_gpio->pioc_virq); + if (!gpiochip_prev) { + /* Then register the chain on the parent IRQ */ + gpiochip_set_chained_irqchip(&at91_gpio->chip, + &gpio_irqchip, + at91_gpio->pioc_virq, + gpio_irq_handler); return 0; + } - /* Then register the chain on the parent IRQ */ - gpiochip_set_chained_irqchip(&at91_gpio->chip, - &gpio_irqchip, - at91_gpio->pioc_virq, - gpio_irq_handler); + prev = container_of(gpiochip_prev, struct at91_gpio_chip, chip); - return 0; + /* we can only have 2 banks before */ + for (i = 0; i < 2; i++) { + if (prev->next) { + prev = prev->next; + } else { + prev->next = at91_gpio; + return 0; + } + } + + return -EINVAL; } /* This structure is replicated for each GPIO block allocated at probe time */ @@ -1675,24 +1697,6 @@ static struct gpio_chip at91_gpio_template = { .ngpio = MAX_NB_GPIO_PER_BANK, }; -static void at91_gpio_probe_fixup(void) -{ - unsigned i; - struct at91_gpio_chip *at91_gpio, *last = NULL; - - for (i = 0; i < gpio_banks; i++) { - at91_gpio = gpio_chips[i]; - - /* - * GPIO controller are grouped on some SoC: - * PIOC, PIOD and PIOE can share the same IRQ line - */ - if (last && last->pioc_virq == at91_gpio->pioc_virq) - last->next = at91_gpio; - last = at91_gpio; - } -} - static struct of_device_id at91_gpio_of_match[] = { { .compatible = "atmel,at91sam9x5-gpio", .data = &at91sam9x5_ops, }, { .compatible = "atmel,at91rm9200-gpio", .data = &at91rm9200_ops }, @@ -1805,8 +1809,6 @@ static int at91_gpio_probe(struct platform_device *pdev) gpio_chips[alias_idx] = at91_chip; gpio_banks = max(gpio_banks, alias_idx + 1); - at91_gpio_probe_fixup(); - ret = at91_gpio_of_irq_setup(pdev, at91_chip); if (ret) goto irq_setup_err; -- cgit v1.2.3 From f48a01651b1758550c4d3ee65ec726dfa0658780 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Tue, 20 Jan 2015 17:21:42 +0000 Subject: drm/i915: Init PPGTT before context enable Commit 82460d972 ("drm/i915: Rework ppgtt init to no require an aliasing ppgtt") introduced a regression on Broadwell, triggering the following IOMMU fault at startup: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem dmar: DRHD: handling fault status reg 2 dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr 880000 DMAR:[fault reason 23] Unknown fbcon: inteldrmfb (fb0) is primary device Further commentary from Daniel: I sugggested this change to David after staring at the offending patch for a while. I have no idea and theory whatsoever why this would upset the gpu less than the other way round. But it seems to work. David promised to chase hw people a bit more to get a more meaningful answer. Wrt the comment that this deletes: I've done some digging and afaict loading context before ppgtt enable was once required before our recent restructuring of the context/ppgtt init code: Before that context sw setup (i.e. allocating the default context) and hw setup was smashed together. Also the setup of the default context was the bit that actually allocated the aliasing ppgtt structures. Which is the reason for the context before ppgtt depency. Or was, since with all the untangling there's no no real depency any more (functional, who knows what the hw is doing), so the comment is just stale. Signed-off-by: David Woodhouse Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 76354d3ba925..b4a4f36d2f00 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4884,25 +4884,18 @@ i915_gem_init_hw(struct drm_device *dev) for (i = 0; i < NUM_L3_SLICES(dev); i++) i915_gem_l3_remap(&dev_priv->ring[RCS], i); - /* - * XXX: Contexts should only be initialized once. Doing a switch to the - * default context switch however is something we'd like to do after - * reset or thaw (the latter may not actually be necessary for HW, but - * goes with our code better). Context switching requires rings (for - * the do_switch), but before enabling PPGTT. So don't move this. - */ - ret = i915_gem_context_enable(dev_priv); + ret = i915_ppgtt_init_hw(dev); if (ret && ret != -EIO) { - DRM_ERROR("Context enable failed %d\n", ret); + DRM_ERROR("PPGTT enable failed %d\n", ret); i915_gem_cleanup_ringbuffer(dev); - - return ret; } - ret = i915_ppgtt_init_hw(dev); + ret = i915_gem_context_enable(dev_priv); if (ret && ret != -EIO) { - DRM_ERROR("PPGTT enable failed %d\n", ret); + DRM_ERROR("Context enable failed %d\n", ret); i915_gem_cleanup_ringbuffer(dev); + + return ret; } return ret; -- cgit v1.2.3 From 13f3fbe827d09e3182023c8c54058cbf97aa146e Mon Sep 17 00:00:00 2001 From: Jeremiah Mahler Date: Mon, 12 Jan 2015 11:01:03 -0800 Subject: drm/i915: fix inconsistent brightness after resume commit 6dda730e55f412a6dfb181cae6784822ba463847 Author: Jani Nikula Date: Tue Jun 24 18:27:40 2014 +0300 drm/i915: respect the VBT minimum backlight brightness introduced a bug which resulted in inconsistent brightness levels on different machines. If a suspended was entered with the screen off some machines would resume with the screen at minimum brightness and others at maximum brightness. The following commands can be used to produce this behavior. xset dpms force off sleep 1 sudo systemctl suspend (resume ...) The root cause of this problem is a comparison which checks to see if the backlight level is zero when the panel is enabled. If it is zero, it is set to the maximum level. Unfortunately, not all machines have a minimum level of zero. On those machines the level is left at the minimum instead of begin set to the maximum. Fix the bug by updating the comparison to check for the minimum backlight level instead of zero. Also, expand the comparison for the possible case when the level is less than the minimum. Fixes: 6dda730e55f4 ("respect the VBT minimum backlight brightness") Signed-off-by: Jeremiah Mahler Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_panel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 4d63839bd9b4..dfb783a8f2c3 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -962,7 +962,7 @@ void intel_panel_enable_backlight(struct intel_connector *connector) WARN_ON(panel->backlight.max == 0); - if (panel->backlight.level == 0) { + if (panel->backlight.level <= panel->backlight.min) { panel->backlight.level = panel->backlight.max; if (panel->backlight.device) panel->backlight.device->props.brightness = -- cgit v1.2.3 From af1a7301c7cf8912dca03065d448c4437c5c239f Mon Sep 17 00:00:00 2001 From: Bob Paauwe Date: Thu, 18 Dec 2014 09:51:26 -0800 Subject: drm/i915: Only fence tiled region of object. When creating a fence for a tiled object, only fence the area that makes up the actual tiles. The object may be larger than the tiled area and if we allow those extra addresses to be fenced, they'll get converted to addresses beyond where the object is mapped. This opens up the possiblity of writes beyond the end of object. To prevent this, we adjust the size of the fence to only encompass the area that makes up the actual tiles. The extra space is considered un-tiled and now behaves as if it was a linear object. Testcase: igt/gem_tiled_fence_overflow Reported-by: Dan Hettena Signed-off-by: Bob Paauwe Reviewed-by: Daniel Vetter Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index b4a4f36d2f00..5f614828d365 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3148,6 +3148,13 @@ static void i965_write_fence_reg(struct drm_device *dev, int reg, u32 size = i915_gem_obj_ggtt_size(obj); uint64_t val; + /* Adjust fence size to match tiled area */ + if (obj->tiling_mode != I915_TILING_NONE) { + uint32_t row_size = obj->stride * + (obj->tiling_mode == I915_TILING_Y ? 32 : 8); + size = (size / row_size) * row_size; + } + val = (uint64_t)((i915_gem_obj_ggtt_offset(obj) + size - 4096) & 0xfffff000) << 32; val |= i915_gem_obj_ggtt_offset(obj) & 0xfffff000; -- cgit v1.2.3 From a35cc9d0c0118fb18f7c5dd7a44adb454868a679 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Wed, 21 Jan 2015 10:33:53 -0800 Subject: drm/i915: Fix and clean BDW PCH identification It seems in the past we have BDW with PCH not been propperly identified and we force it to be LPT and we were warning !IS_HASWELL on propper identification. Now that products are out there we are receiveing logs with this incorrect WARN. And also according to local tests on all production BDW here ULT or HALO we don't need this force anymore. So let's clean this block for real. v2: Fix LPT_LP WARNs to avoid wrong warns on BDW_ULT (By Jani). Reference: https://bugs.freedesktop.org/attachment.cgi?id=110972 Cc: Jani Nikula Cc: Paulo Zanoni Cc: Xion Zhang Cc: stable@vger.kernel.org Signed-off-by: Rodrigo Vivi Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 574057cd1d09..7643300828c3 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -462,19 +462,13 @@ void intel_detect_pch(struct drm_device *dev) } else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) { dev_priv->pch_type = PCH_LPT; DRM_DEBUG_KMS("Found LynxPoint PCH\n"); - WARN_ON(!IS_HASWELL(dev)); - WARN_ON(IS_HSW_ULT(dev)); - } else if (IS_BROADWELL(dev)) { - dev_priv->pch_type = PCH_LPT; - dev_priv->pch_id = - INTEL_PCH_LPT_LP_DEVICE_ID_TYPE; - DRM_DEBUG_KMS("This is Broadwell, assuming " - "LynxPoint LP PCH\n"); + WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev)); + WARN_ON(IS_HSW_ULT(dev) || IS_BDW_ULT(dev)); } else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) { dev_priv->pch_type = PCH_LPT; DRM_DEBUG_KMS("Found LynxPoint LP PCH\n"); - WARN_ON(!IS_HASWELL(dev)); - WARN_ON(!IS_HSW_ULT(dev)); + WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev)); + WARN_ON(!IS_HSW_ULT(dev) && !IS_BDW_ULT(dev)); } else if (id == INTEL_PCH_SPT_DEVICE_ID_TYPE) { dev_priv->pch_type = PCH_SPT; DRM_DEBUG_KMS("Found SunrisePoint PCH\n"); -- cgit v1.2.3 From 6b96d705f3cf435b0b8835b12c9742513c77fed6 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Mon, 19 Jan 2015 16:16:15 -0800 Subject: drm/i915: BDW Fix Halo PCI IDs marked as ULT. BDW with PCI-IDs ended in "2" aren't ULT, but HALO. Let's fix it and at least allow VGA to work on this units. v2: forgot ammend and v1 doesn't compile Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87220 Cc: Xion Zhang Cc: Guo Jinxian Cc: Jani Nikula Cc: Stable Signed-off-by: Rodrigo Vivi Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index e9f891c432f8..9d7a7155bf02 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2159,8 +2159,7 @@ struct drm_i915_cmd_table { #define IS_HSW_EARLY_SDV(dev) (IS_HASWELL(dev) && \ (INTEL_DEVID(dev) & 0xFF00) == 0x0C00) #define IS_BDW_ULT(dev) (IS_BROADWELL(dev) && \ - ((INTEL_DEVID(dev) & 0xf) == 0x2 || \ - (INTEL_DEVID(dev) & 0xf) == 0x6 || \ + ((INTEL_DEVID(dev) & 0xf) == 0x6 || \ (INTEL_DEVID(dev) & 0xf) == 0xe)) #define IS_BDW_GT3(dev) (IS_BROADWELL(dev) && \ (INTEL_DEVID(dev) & 0x00F0) == 0x0020) -- cgit v1.2.3 From c7e3ca515e784a82223f447b79eb2090bdb91378 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 23 Jan 2015 16:37:51 +0100 Subject: iommu/tegra: gart: Do not register with bus The driver currently doesn't work as expected and causes existing setups with Tegra20 to break after commit df06b759f2cf ("drm/tegra: Add IOMMU support"). To restore these setups, do not register the operations with the platform bus for now. Fixing this properly will involve non-trivial changes to the DRM driver, which are unlikely to be accepted at this point in the release cycle. Reported-by: Misha Komarovskiy Reported-by: Nicolas Chauvet Tested-by: Misha Komarovskiy Tested-by: Dmitry Osipenko Cc: Hiroshi Doyu Signed-off-by: Thierry Reding Signed-off-by: Joerg Roedel --- drivers/iommu/tegra-gart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/tegra-gart.c b/drivers/iommu/tegra-gart.c index f722a0c466cf..10fc32dabb0a 100644 --- a/drivers/iommu/tegra-gart.c +++ b/drivers/iommu/tegra-gart.c @@ -395,7 +395,7 @@ static int tegra_gart_probe(struct platform_device *pdev) do_gart_setup(gart, NULL); gart_handle = gart; - bus_set_iommu(&platform_bus_type, &gart_iommu_ops); + return 0; } -- cgit v1.2.3 From 35577079b9943e158c7032afe1dde6faf4385222 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 23 Jan 2015 16:37:52 +0100 Subject: iommu/tegra: gart: Provide default ->map_sg() callback Commit 315786ebbf4a ("iommu: Add iommu_map_sg() function") adds a new ->map_sg() callback and provides a default implementation that drivers can use until they implement a hardware-specific variant. Unfortunately the Tegra GART driver was not updated as part of that commit, so that iommu_map_sg() calls on a domain provided by the GART cause an oops. Fixes: 315786ebbf4a ("iommu: Add iommu_map_sg() function") Cc: Hiroshi Doyu Signed-off-by: Thierry Reding Signed-off-by: Joerg Roedel --- drivers/iommu/tegra-gart.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iommu/tegra-gart.c b/drivers/iommu/tegra-gart.c index 10fc32dabb0a..c48da057dbb1 100644 --- a/drivers/iommu/tegra-gart.c +++ b/drivers/iommu/tegra-gart.c @@ -315,6 +315,7 @@ static const struct iommu_ops gart_iommu_ops = { .attach_dev = gart_iommu_attach_dev, .detach_dev = gart_iommu_detach_dev, .map = gart_iommu_map, + .map_sg = default_iommu_map_sg, .unmap = gart_iommu_unmap, .iova_to_phys = gart_iommu_iova_to_phys, .pgsize_bitmap = GART_IOMMU_PGSIZES, -- cgit v1.2.3 From d5fd120e7860c2b3d4c936a2ebadb6b244bec4c8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 26 Jan 2015 20:59:31 +0100 Subject: i2c: Only include slave support if selected Make the slave support depend on CONFIG_I2C_SLAVE. Otherwise it gets included unconditionally, even when it is not needed. I2C bus drivers which implement slave support must select I2C_SLAVE. Signed-off-by: Jean Delvare Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 1 + drivers/i2c/i2c-core.c | 2 ++ include/linux/i2c.h | 6 ++++++ 3 files changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 31e8308ba899..ab838d9e28b6 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -881,6 +881,7 @@ config I2C_XLR config I2C_RCAR tristate "Renesas R-Car I2C Controller" depends on ARCH_SHMOBILE || COMPILE_TEST + select I2C_SLAVE help If you say yes to this option, support will be included for the R-Car I2C controller. diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 39d25a8cb1ad..e9eae57a2b50 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -2972,6 +2972,7 @@ trace: } EXPORT_SYMBOL(i2c_smbus_xfer); +#if IS_ENABLED(CONFIG_I2C_SLAVE) int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb) { int ret; @@ -3019,6 +3020,7 @@ int i2c_slave_unregister(struct i2c_client *client) return ret; } EXPORT_SYMBOL_GPL(i2c_slave_unregister); +#endif MODULE_AUTHOR("Simon G. Vogl "); MODULE_DESCRIPTION("I2C-Bus main module"); diff --git a/include/linux/i2c.h b/include/linux/i2c.h index e3a1721c8354..7c7695940ddd 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -228,7 +228,9 @@ struct i2c_client { struct device dev; /* the device structure */ int irq; /* irq issued by device */ struct list_head detected; +#if IS_ENABLED(CONFIG_I2C_SLAVE) i2c_slave_cb_t slave_cb; /* callback for slave mode */ +#endif }; #define to_i2c_client(d) container_of(d, struct i2c_client, dev) @@ -253,6 +255,7 @@ static inline void i2c_set_clientdata(struct i2c_client *dev, void *data) /* I2C slave support */ +#if IS_ENABLED(CONFIG_I2C_SLAVE) enum i2c_slave_event { I2C_SLAVE_REQ_READ_START, I2C_SLAVE_REQ_READ_END, @@ -269,6 +272,7 @@ static inline int i2c_slave_event(struct i2c_client *client, { return client->slave_cb(client, event, val); } +#endif /** * struct i2c_board_info - template for device creation @@ -404,8 +408,10 @@ struct i2c_algorithm { /* To determine what the adapter supports */ u32 (*functionality) (struct i2c_adapter *); +#if IS_ENABLED(CONFIG_I2C_SLAVE) int (*reg_slave)(struct i2c_client *client); int (*unreg_slave)(struct i2c_client *client); +#endif }; /** -- cgit v1.2.3 From 19c5392eb1c1e81188e898400c0e8258827eb160 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 27 Jan 2015 10:24:53 -0600 Subject: PCI: designware: Reject MSI-X IRQs The DesignWare PCIe MSI hardware does not support MSI-X IRQs. Setting those up failed as a side effect of a bug which was fixed by 91f8ae823f2b ("PCI: designware: Setup and clear exactly one MSI at a time"). Now that this bug is fixed, MSI-X IRQs need to be rejected explicitly; otherwise devices trying to use them may end up with incorrectly working interrupts. Fixes: 91f8ae823f2b ("PCI: designware: Setup and clear exactly one MSI at a time") Signed-off-by: Lucas Stach Signed-off-by: Bjorn Helgaas Acked-by: Jingoo Han CC: stable@vger.kernel.org # v3.18+ --- drivers/pci/host/pcie-designware.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index df781cdf13c1..17ca98657a28 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -283,6 +283,9 @@ static int dw_msi_setup_irq(struct msi_controller *chip, struct pci_dev *pdev, struct msi_msg msg; struct pcie_port *pp = sys_to_pcie(pdev->bus->sysdata); + if (desc->msi_attrib.is_msix) + return -EINVAL; + irq = assign_irq(1, desc, &pos); if (irq < 0) return irq; -- cgit v1.2.3 From 973fbce69ed8e79b5fe3ad19cfecb581a7ef8048 Mon Sep 17 00:00:00 2001 From: Bhuvanchandra DV Date: Tue, 27 Jan 2015 16:27:20 +0530 Subject: spi: spi-fsl-dspi: Remove usage of devm_kzalloc devm_* API was supposed to be used only in probe function call. Memory is allocated at 'probe' and free automatically at 'remove'. Usage of devm_* functions outside probe sometimes leads to memory leak. Avoid using devm_kzalloc in dspi_setup_transfer and use kzalloc instead. Also add the dspi_cleanup function to free the controller data upon cleanup. Acked-by: Stefan Agner Signed-off-by: Bhuvanchandra DV Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-fsl-dspi.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 4cda994d3f40..9b80d54d4ddb 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -342,8 +342,7 @@ static int dspi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) /* Only alloc on first setup */ chip = spi_get_ctldata(spi); if (chip == NULL) { - chip = devm_kzalloc(&spi->dev, sizeof(struct chip_data), - GFP_KERNEL); + chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); if (!chip) return -ENOMEM; } @@ -382,6 +381,16 @@ static int dspi_setup(struct spi_device *spi) return dspi_setup_transfer(spi, NULL); } +static void dspi_cleanup(struct spi_device *spi) +{ + struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi); + + dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n", + spi->master->bus_num, spi->chip_select); + + kfree(chip); +} + static irqreturn_t dspi_interrupt(int irq, void *dev_id) { struct fsl_dspi *dspi = (struct fsl_dspi *)dev_id; @@ -467,6 +476,7 @@ static int dspi_probe(struct platform_device *pdev) dspi->bitbang.master->setup = dspi_setup; dspi->bitbang.master->dev.of_node = pdev->dev.of_node; + master->cleanup = dspi_cleanup; master->mode_bits = SPI_CPOL | SPI_CPHA; master->bits_per_word_mask = SPI_BPW_MASK(4) | SPI_BPW_MASK(8) | SPI_BPW_MASK(16); -- cgit v1.2.3 From ae43e9d05eb4bd324155292f889fbd001c4faea8 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 19 Jan 2015 18:13:43 +0300 Subject: rbd: fix rbd_dev_parent_get() when parent_overlap == 0 The comment for rbd_dev_parent_get() said * We must get the reference before checking for the overlap to * coordinate properly with zeroing the parent overlap in * rbd_dev_v2_parent_info() when an image gets flattened. We * drop it again if there is no overlap. but the "drop it again if there is no overlap" part was missing from the implementation. This lead to absurd parent_ref values for images with parent_overlap == 0, as parent_ref was incremented for each img_request and virtually never decremented. Fix this by leveraging the fact that refresh path calls rbd_dev_v2_parent_info() under header_rwsem and use it for read in rbd_dev_parent_get(), instead of messing around with atomics. Get rid of barriers in rbd_dev_v2_parent_info() while at it - I don't see what they'd pair with now and I suspect we are in a pretty miserable situation as far as proper locking goes regardless. Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: Ilya Dryomov Reviewed-by: Josh Durgin Reviewed-by: Alex Elder --- drivers/block/rbd.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 3ec85dfce124..d511ecb35144 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2098,32 +2098,26 @@ static void rbd_dev_parent_put(struct rbd_device *rbd_dev) * If an image has a non-zero parent overlap, get a reference to its * parent. * - * We must get the reference before checking for the overlap to - * coordinate properly with zeroing the parent overlap in - * rbd_dev_v2_parent_info() when an image gets flattened. We - * drop it again if there is no overlap. - * * Returns true if the rbd device has a parent with a non-zero * overlap and a reference for it was successfully taken, or * false otherwise. */ static bool rbd_dev_parent_get(struct rbd_device *rbd_dev) { - int counter; + int counter = 0; if (!rbd_dev->parent_spec) return false; - counter = atomic_inc_return_safe(&rbd_dev->parent_ref); - if (counter > 0 && rbd_dev->parent_overlap) - return true; - - /* Image was flattened, but parent is not yet torn down */ + down_read(&rbd_dev->header_rwsem); + if (rbd_dev->parent_overlap) + counter = atomic_inc_return_safe(&rbd_dev->parent_ref); + up_read(&rbd_dev->header_rwsem); if (counter < 0) rbd_warn(rbd_dev, "parent reference overflow"); - return false; + return counter > 0; } /* @@ -4239,7 +4233,6 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev) */ if (rbd_dev->parent_overlap) { rbd_dev->parent_overlap = 0; - smp_mb(); rbd_dev_parent_put(rbd_dev); pr_info("%s: clone image has been flattened\n", rbd_dev->disk->disk_name); @@ -4285,7 +4278,6 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev) * treat it specially. */ rbd_dev->parent_overlap = overlap; - smp_mb(); if (!overlap) { /* A null parent_spec indicates it's the initial probe */ -- cgit v1.2.3 From e69b8d414f948c242ad9f3eb2b7e24fba783dbbd Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 19 Jan 2015 12:06:14 +0300 Subject: rbd: drop parent_ref in rbd_dev_unprobe() unconditionally This effectively reverts the last hunk of 392a9dad7e77 ("rbd: detect when clone image is flattened"). The problem with parent_overlap != 0 condition is that it's possible and completely valid to have an image with parent_overlap == 0 whose parent state needs to be cleaned up on unmap. The next commit, which drops the "clone image now standalone" logic, opens up another window of opportunity to hit this, but even without it # cat parent-ref.sh #!/bin/bash rbd create --image-format 2 --size 1 foo rbd snap create foo@snap rbd snap protect foo@snap rbd clone foo@snap bar rbd resize --allow-shrink --size 0 bar rbd resize --size 1 bar DEV=$(rbd map bar) rbd unmap $DEV leaves rbd_device/rbd_spec/etc and rbd_client along with ceph_client hanging around. My thinking behind calling rbd_dev_parent_put() unconditionally is that there shouldn't be any requests in flight at that point in time as we are deep into unmap sequence. Hence, even if rbd_dev_unparent() caused by flatten is delayed by in-flight requests, it will have finished by the time we reach rbd_dev_unprobe() caused by unmap, thus turning unconditional rbd_dev_parent_put() into a no-op. Fixes: http://tracker.ceph.com/issues/10352 Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: Ilya Dryomov Reviewed-by: Josh Durgin Reviewed-by: Alex Elder --- drivers/block/rbd.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index d511ecb35144..8a86b62466f7 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -5106,10 +5106,7 @@ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) { struct rbd_image_header *header; - /* Drop parent reference unless it's already been done (or none) */ - - if (rbd_dev->parent_overlap) - rbd_dev_parent_put(rbd_dev); + rbd_dev_parent_put(rbd_dev); /* Free dynamic fields from the header, then zero it out */ -- cgit v1.2.3 From 766a78882ddf79b162243649d7dfdbac1fb6fb88 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Wed, 28 Jan 2015 12:07:46 +0000 Subject: dm cache: fix missing ERR_PTR returns and handling Commit 9b1cc9f251 ("dm cache: share cache-metadata object across inactive and active DM tables") mistakenly ignored the use of ERR_PTR returns. Restore missing IS_ERR checks and ERR_PTR returns where appropriate. Reported-by: Dan Carpenter Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org --- drivers/md/dm-cache-metadata.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-cache-metadata.c b/drivers/md/dm-cache-metadata.c index 21b156242e42..c1c010498a21 100644 --- a/drivers/md/dm-cache-metadata.c +++ b/drivers/md/dm-cache-metadata.c @@ -683,7 +683,7 @@ static struct dm_cache_metadata *metadata_open(struct block_device *bdev, cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); if (!cmd) { DMERR("could not allocate metadata struct"); - return NULL; + return ERR_PTR(-ENOMEM); } atomic_set(&cmd->ref_count, 1); @@ -745,7 +745,7 @@ static struct dm_cache_metadata *lookup_or_open(struct block_device *bdev, return cmd; cmd = metadata_open(bdev, data_block_size, may_format_device, policy_hint_size); - if (cmd) { + if (!IS_ERR(cmd)) { mutex_lock(&table_lock); cmd2 = lookup(bdev); if (cmd2) { @@ -780,9 +780,10 @@ struct dm_cache_metadata *dm_cache_metadata_open(struct block_device *bdev, { struct dm_cache_metadata *cmd = lookup_or_open(bdev, data_block_size, may_format_device, policy_hint_size); - if (cmd && !same_params(cmd, data_block_size)) { + + if (!IS_ERR(cmd) && !same_params(cmd, data_block_size)) { dm_cache_metadata_close(cmd); - return NULL; + return ERR_PTR(-EINVAL); } return cmd; -- cgit v1.2.3 From 2a7eaea02b99b6e267b1e89c79acc6e9a51cee3b Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Mon, 26 Jan 2015 11:38:21 +0000 Subject: dm thin: don't allow messages to be sent to a pool target in READ_ONLY or FAIL mode You can't modify the metadata in these modes. It's better to fail these messages immediately than let the block-manager deny write locks on metadata blocks. Otherwise these failed metadata changes will trigger 'needs_check' to get set in the metadata superblock -- requiring repair using the thin_check utility. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org --- drivers/md/dm-thin.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 493478989dbd..07705ee181e3 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -3385,6 +3385,12 @@ static int pool_message(struct dm_target *ti, unsigned argc, char **argv) struct pool_c *pt = ti->private; struct pool *pool = pt->pool; + if (get_pool_mode(pool) >= PM_READ_ONLY) { + DMERR("%s: unable to service pool target messages in READ_ONLY or FAIL mode", + dm_device_name(pool->pool_md)); + return -EINVAL; + } + if (!strcasecmp(argv[0], "create_thin")) r = process_create_thin_mesg(argc, argv, pool); -- cgit v1.2.3 From 33692f27597fcab536d7cbbcc8f52905133e4aa7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 29 Jan 2015 10:51:32 -0800 Subject: vm: add VM_FAULT_SIGSEGV handling support The core VM already knows about VM_FAULT_SIGBUS, but cannot return a "you should SIGSEGV" error, because the SIGSEGV case was generally handled by the caller - usually the architecture fault handler. That results in lots of duplication - all the architecture fault handlers end up doing very similar "look up vma, check permissions, do retries etc" - but it generally works. However, there are cases where the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV. In particular, when accessing the stack guard page, libsigsegv expects a SIGSEGV. And it usually got one, because the stack growth is handled by that duplicated architecture fault handler. However, when the generic VM layer started propagating the error return from the stack expansion in commit fee7e49d4514 ("mm: propagate error from stack expansion even for guard page"), that now exposed the existing VM_FAULT_SIGBUS result to user space. And user space really expected SIGSEGV, not SIGBUS. To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those duplicate architecture fault handlers about it. They all already have the code to handle SIGSEGV, so it's about just tying that new return value to the existing code, but it's all a bit annoying. This is the mindless minimal patch to do this. A more extensive patch would be to try to gather up the mostly shared fault handling logic into one generic helper routine, and long-term we really should do that cleanup. Just from this patch, you can generally see that most architectures just copied (directly or indirectly) the old x86 way of doing things, but in the meantime that original x86 model has been improved to hold the VM semaphore for shorter times etc and to handle VM_FAULT_RETRY and other "newer" things, so it would be a good idea to bring all those improvements to the generic case and teach other architectures about them too. Reported-and-tested-by: Takashi Iwai Tested-by: Jan Engelhardt Acked-by: Heiko Carstens # "s390 still compiles and boots" Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- arch/alpha/mm/fault.c | 2 ++ arch/arc/mm/fault.c | 2 ++ arch/avr32/mm/fault.c | 2 ++ arch/cris/mm/fault.c | 2 ++ arch/frv/mm/fault.c | 2 ++ arch/ia64/mm/fault.c | 2 ++ arch/m32r/mm/fault.c | 2 ++ arch/m68k/mm/fault.c | 2 ++ arch/metag/mm/fault.c | 2 ++ arch/microblaze/mm/fault.c | 2 ++ arch/mips/mm/fault.c | 2 ++ arch/mn10300/mm/fault.c | 2 ++ arch/nios2/mm/fault.c | 2 ++ arch/openrisc/mm/fault.c | 2 ++ arch/parisc/mm/fault.c | 2 ++ arch/powerpc/mm/copro_fault.c | 2 +- arch/powerpc/mm/fault.c | 2 ++ arch/s390/mm/fault.c | 6 ++++++ arch/score/mm/fault.c | 2 ++ arch/sh/mm/fault.c | 2 ++ arch/sparc/mm/fault_32.c | 2 ++ arch/sparc/mm/fault_64.c | 2 ++ arch/tile/mm/fault.c | 2 ++ arch/um/kernel/trap.c | 2 ++ arch/x86/mm/fault.c | 2 ++ arch/xtensa/mm/fault.c | 2 ++ drivers/staging/lustre/lustre/llite/vvp_io.c | 2 +- include/linux/mm.h | 6 ++++-- mm/gup.c | 4 ++-- mm/ksm.c | 2 +- 30 files changed, 63 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c index 98838a05ba6d..9d0ac091a52a 100644 --- a/arch/alpha/mm/fault.c +++ b/arch/alpha/mm/fault.c @@ -156,6 +156,8 @@ retry: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c index 6f7e3a68803a..0f8df3b5b1b3 100644 --- a/arch/arc/mm/fault.c +++ b/arch/arc/mm/fault.c @@ -161,6 +161,8 @@ good_area: if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c index 0eca93327195..d223a8b57c1e 100644 --- a/arch/avr32/mm/fault.c +++ b/arch/avr32/mm/fault.c @@ -142,6 +142,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c index 1790f22e71a2..2686a7aa8ec8 100644 --- a/arch/cris/mm/fault.c +++ b/arch/cris/mm/fault.c @@ -176,6 +176,8 @@ retry: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c index 9a66372fc7c7..ec4917ddf678 100644 --- a/arch/frv/mm/fault.c +++ b/arch/frv/mm/fault.c @@ -168,6 +168,8 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c index 7225dad87094..ba5ba7accd0d 100644 --- a/arch/ia64/mm/fault.c +++ b/arch/ia64/mm/fault.c @@ -172,6 +172,8 @@ retry: */ if (fault & VM_FAULT_OOM) { goto out_of_memory; + } else if (fault & VM_FAULT_SIGSEGV) { + goto bad_area; } else if (fault & VM_FAULT_SIGBUS) { signal = SIGBUS; goto bad_area; diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c index e9c6a8014bd6..e3d4d4890104 100644 --- a/arch/m32r/mm/fault.c +++ b/arch/m32r/mm/fault.c @@ -200,6 +200,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c index 2bd7487440c4..b2f04aee46ec 100644 --- a/arch/m68k/mm/fault.c +++ b/arch/m68k/mm/fault.c @@ -145,6 +145,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto map_err; else if (fault & VM_FAULT_SIGBUS) goto bus_err; BUG(); diff --git a/arch/metag/mm/fault.c b/arch/metag/mm/fault.c index 332680e5ebf2..2de5dc695a87 100644 --- a/arch/metag/mm/fault.c +++ b/arch/metag/mm/fault.c @@ -141,6 +141,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c index fa4cf52aa7a6..d46a5ebb7570 100644 --- a/arch/microblaze/mm/fault.c +++ b/arch/microblaze/mm/fault.c @@ -224,6 +224,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index becc42bb1849..70ab5d664332 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -158,6 +158,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c index 3516cbdf1ee9..0c2cc5d39c8e 100644 --- a/arch/mn10300/mm/fault.c +++ b/arch/mn10300/mm/fault.c @@ -262,6 +262,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/nios2/mm/fault.c b/arch/nios2/mm/fault.c index 15a0bb5fc06d..34429d5a0ccd 100644 --- a/arch/nios2/mm/fault.c +++ b/arch/nios2/mm/fault.c @@ -135,6 +135,8 @@ survive: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/openrisc/mm/fault.c b/arch/openrisc/mm/fault.c index 0703acf7d327..230ac20ae794 100644 --- a/arch/openrisc/mm/fault.c +++ b/arch/openrisc/mm/fault.c @@ -171,6 +171,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index 3ca9c1131cfe..e5120e653240 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -256,6 +256,8 @@ good_area: */ if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto bad_area; BUG(); diff --git a/arch/powerpc/mm/copro_fault.c b/arch/powerpc/mm/copro_fault.c index 5a236f082c78..1b5305d4bdab 100644 --- a/arch/powerpc/mm/copro_fault.c +++ b/arch/powerpc/mm/copro_fault.c @@ -76,7 +76,7 @@ int copro_handle_mm_fault(struct mm_struct *mm, unsigned long ea, if (*flt & VM_FAULT_OOM) { ret = -ENOMEM; goto out_unlock; - } else if (*flt & VM_FAULT_SIGBUS) { + } else if (*flt & (VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV)) { ret = -EFAULT; goto out_unlock; } diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index eb79907f34fa..6154b0a2b063 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -437,6 +437,8 @@ good_area: */ fault = handle_mm_fault(mm, vma, address, flags); if (unlikely(fault & (VM_FAULT_RETRY|VM_FAULT_ERROR))) { + if (fault & VM_FAULT_SIGSEGV) + goto bad_area; rc = mm_fault_error(regs, address, fault); if (rc >= MM_FAULT_RETURN) goto bail; diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 811937bb90be..9065d5aa3932 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -374,6 +374,12 @@ static noinline void do_fault_error(struct pt_regs *regs, int fault) do_no_context(regs); else pagefault_out_of_memory(); + } else if (fault & VM_FAULT_SIGSEGV) { + /* Kernel mode? Handle exceptions or die */ + if (!user_mode(regs)) + do_no_context(regs); + else + do_sigsegv(regs, SEGV_MAPERR); } else if (fault & VM_FAULT_SIGBUS) { /* Kernel mode? Handle exceptions or die */ if (!user_mode(regs)) diff --git a/arch/score/mm/fault.c b/arch/score/mm/fault.c index 52238983527d..6860beb2a280 100644 --- a/arch/score/mm/fault.c +++ b/arch/score/mm/fault.c @@ -114,6 +114,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 541dc6101508..a58fec9b55e0 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -353,6 +353,8 @@ mm_fault_error(struct pt_regs *regs, unsigned long error_code, } else { if (fault & VM_FAULT_SIGBUS) do_sigbus(regs, error_code, address); + else if (fault & VM_FAULT_SIGSEGV) + bad_area(regs, error_code, address); else BUG(); } diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c index 908e8c17c902..70d817154fe8 100644 --- a/arch/sparc/mm/fault_32.c +++ b/arch/sparc/mm/fault_32.c @@ -249,6 +249,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c index 18fcd7167095..479823249429 100644 --- a/arch/sparc/mm/fault_64.c +++ b/arch/sparc/mm/fault_64.c @@ -446,6 +446,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c index 565e25a98334..0f61a73534e6 100644 --- a/arch/tile/mm/fault.c +++ b/arch/tile/mm/fault.c @@ -442,6 +442,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c index 5678c3571e7c..209617302df8 100644 --- a/arch/um/kernel/trap.c +++ b/arch/um/kernel/trap.c @@ -80,6 +80,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) { goto out_of_memory; + } else if (fault & VM_FAULT_SIGSEGV) { + goto out; } else if (fault & VM_FAULT_SIGBUS) { err = -EACCES; goto out; diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 38dcec403b46..e3ff27a5b634 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -898,6 +898,8 @@ mm_fault_error(struct pt_regs *regs, unsigned long error_code, if (fault & (VM_FAULT_SIGBUS|VM_FAULT_HWPOISON| VM_FAULT_HWPOISON_LARGE)) do_sigbus(regs, error_code, address, fault); + else if (fault & VM_FAULT_SIGSEGV) + bad_area_nosemaphore(regs, error_code, address); else BUG(); } diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c index b57c4f91f487..9e3571a6535c 100644 --- a/arch/xtensa/mm/fault.c +++ b/arch/xtensa/mm/fault.c @@ -117,6 +117,8 @@ good_area: if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); diff --git a/drivers/staging/lustre/lustre/llite/vvp_io.c b/drivers/staging/lustre/lustre/llite/vvp_io.c index 930f6010203e..65d610abe06e 100644 --- a/drivers/staging/lustre/lustre/llite/vvp_io.c +++ b/drivers/staging/lustre/lustre/llite/vvp_io.c @@ -632,7 +632,7 @@ static int vvp_io_kernel_fault(struct vvp_fault_io *cfio) return 0; } - if (cfio->fault.ft_flags & VM_FAULT_SIGBUS) { + if (cfio->fault.ft_flags & (VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV)) { CDEBUG(D_PAGE, "got addr %p - SIGBUS\n", vmf->virtual_address); return -EFAULT; } diff --git a/include/linux/mm.h b/include/linux/mm.h index 80fc92a49649..dd5ea3016fc4 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1070,6 +1070,7 @@ static inline int page_mapped(struct page *page) #define VM_FAULT_WRITE 0x0008 /* Special case for get_user_pages */ #define VM_FAULT_HWPOISON 0x0010 /* Hit poisoned small page */ #define VM_FAULT_HWPOISON_LARGE 0x0020 /* Hit poisoned large page. Index encoded in upper bits */ +#define VM_FAULT_SIGSEGV 0x0040 #define VM_FAULT_NOPAGE 0x0100 /* ->fault installed the pte, not return page */ #define VM_FAULT_LOCKED 0x0200 /* ->fault locked the returned page */ @@ -1078,8 +1079,9 @@ static inline int page_mapped(struct page *page) #define VM_FAULT_HWPOISON_LARGE_MASK 0xf000 /* encodes hpage index for large hwpoison */ -#define VM_FAULT_ERROR (VM_FAULT_OOM | VM_FAULT_SIGBUS | VM_FAULT_HWPOISON | \ - VM_FAULT_FALLBACK | VM_FAULT_HWPOISON_LARGE) +#define VM_FAULT_ERROR (VM_FAULT_OOM | VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV | \ + VM_FAULT_HWPOISON | VM_FAULT_HWPOISON_LARGE | \ + VM_FAULT_FALLBACK) /* Encode hstate index for a hwpoisoned large page */ #define VM_FAULT_SET_HINDEX(x) ((x) << 12) diff --git a/mm/gup.c b/mm/gup.c index a900759cc807..8dd50ce6326f 100644 --- a/mm/gup.c +++ b/mm/gup.c @@ -296,7 +296,7 @@ static int faultin_page(struct task_struct *tsk, struct vm_area_struct *vma, return -ENOMEM; if (ret & (VM_FAULT_HWPOISON | VM_FAULT_HWPOISON_LARGE)) return *flags & FOLL_HWPOISON ? -EHWPOISON : -EFAULT; - if (ret & VM_FAULT_SIGBUS) + if (ret & (VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV)) return -EFAULT; BUG(); } @@ -571,7 +571,7 @@ int fixup_user_fault(struct task_struct *tsk, struct mm_struct *mm, return -ENOMEM; if (ret & (VM_FAULT_HWPOISON | VM_FAULT_HWPOISON_LARGE)) return -EHWPOISON; - if (ret & VM_FAULT_SIGBUS) + if (ret & (VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV)) return -EFAULT; BUG(); } diff --git a/mm/ksm.c b/mm/ksm.c index d247efab5073..15647fb0394f 100644 --- a/mm/ksm.c +++ b/mm/ksm.c @@ -376,7 +376,7 @@ static int break_ksm(struct vm_area_struct *vma, unsigned long addr) else ret = VM_FAULT_WRITE; put_page(page); - } while (!(ret & (VM_FAULT_WRITE | VM_FAULT_SIGBUS | VM_FAULT_OOM))); + } while (!(ret & (VM_FAULT_WRITE | VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV | VM_FAULT_OOM))); /* * We must loop because handle_mm_fault() may back out if there's * any difficulty e.g. if pte accessed bit gets updated concurrently. -- cgit v1.2.3 From 8997c27ec41127bf57421cc0205413d525421ddc Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 26 Jan 2015 22:28:13 +0100 Subject: caif: remove wrong dev_net_set() call MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit src_net points to the netns where the netlink message has been received. This netns may be different from the netns where the interface is created (because the user may add IFLA_NET_NS_[PID|FD]). In this case, src_net is the link netns. It seems wrong to override the netns in the newlink() handler because if it was not already src_net, it means that the user explicitly asks to create the netdevice in another netns. CC: Sjur Brændeland CC: Dmitry Tarnyagin Fixes: 8391c4aab1aa ("caif: Bugfixes in CAIF netdevice for close and flow control") Fixes: c41254006377 ("caif-hsi: Add rtnl support") Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/caif/caif_hsi.c | 1 - net/caif/chnl_net.c | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c index 5e40a8b68cbe..b3b922adc0e4 100644 --- a/drivers/net/caif/caif_hsi.c +++ b/drivers/net/caif/caif_hsi.c @@ -1415,7 +1415,6 @@ static int caif_hsi_newlink(struct net *src_net, struct net_device *dev, cfhsi = netdev_priv(dev); cfhsi_netlink_parms(data, cfhsi); - dev_net_set(cfhsi->ndev, src_net); get_ops = symbol_get(cfhsi_get_ops); if (!get_ops) { diff --git a/net/caif/chnl_net.c b/net/caif/chnl_net.c index 4589ff67bfa9..67a4a36febd1 100644 --- a/net/caif/chnl_net.c +++ b/net/caif/chnl_net.c @@ -470,7 +470,6 @@ static int ipcaif_newlink(struct net *src_net, struct net_device *dev, ASSERT_RTNL(); caifdev = netdev_priv(dev); caif_netlink_parms(data, &caifdev->conn_req); - dev_net_set(caifdev->netdev, src_net); ret = register_netdevice(dev); if (ret) -- cgit v1.2.3 From 33564bbb2cf1c05cf3882af5d62a0b2b4a09754c Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 26 Jan 2015 22:28:14 +0100 Subject: vxlan: setup the right link netns in newlink hdlr Rename the netns to src_net to avoid confusion with the netns where the interface stands. The user may specify IFLA_NET_NS_[PID|FD] to create a x-netns netndevice: IFLA_NET_NS_[PID|FD] points to the netns where the netdevice stands and src_net to the link netns. Note that before commit f01ec1c017de ("vxlan: add x-netns support"), it was possible to create a x-netns vxlan netdevice, but the netdevice was not operational. Fixes: f01ec1c017de ("vxlan: add x-netns support") Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 7fbd89fbe107..a8c755dcab14 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2432,10 +2432,10 @@ static void vxlan_sock_work(struct work_struct *work) dev_put(vxlan->dev); } -static int vxlan_newlink(struct net *net, struct net_device *dev, +static int vxlan_newlink(struct net *src_net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { - struct vxlan_net *vn = net_generic(net, vxlan_net_id); + struct vxlan_net *vn = net_generic(src_net, vxlan_net_id); struct vxlan_dev *vxlan = netdev_priv(dev); struct vxlan_rdst *dst = &vxlan->default_dst; __u32 vni; @@ -2445,7 +2445,7 @@ static int vxlan_newlink(struct net *net, struct net_device *dev, if (!data[IFLA_VXLAN_ID]) return -EINVAL; - vxlan->net = dev_net(dev); + vxlan->net = src_net; vni = nla_get_u32(data[IFLA_VXLAN_ID]); dst->remote_vni = vni; @@ -2481,7 +2481,7 @@ static int vxlan_newlink(struct net *net, struct net_device *dev, if (data[IFLA_VXLAN_LINK] && (dst->remote_ifindex = nla_get_u32(data[IFLA_VXLAN_LINK]))) { struct net_device *lowerdev - = __dev_get_by_index(net, dst->remote_ifindex); + = __dev_get_by_index(src_net, dst->remote_ifindex); if (!lowerdev) { pr_info("ifindex %d does not exist\n", dst->remote_ifindex); @@ -2557,7 +2557,7 @@ static int vxlan_newlink(struct net *net, struct net_device *dev, nla_get_u8(data[IFLA_VXLAN_UDP_ZERO_CSUM6_RX])) vxlan->flags |= VXLAN_F_UDP_ZERO_CSUM6_RX; - if (vxlan_find_vni(net, vni, use_ipv6 ? AF_INET6 : AF_INET, + if (vxlan_find_vni(src_net, vni, use_ipv6 ? AF_INET6 : AF_INET, vxlan->dst_port)) { pr_info("duplicate VNI %u\n", vni); return -EEXIST; -- cgit v1.2.3 From e2a4800e75780ccf4e6c2487f82b688ba736eb18 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 28 Jan 2015 10:56:04 +0100 Subject: ppp: deflate: never return len larger than output buffer When we've run out of space in the output buffer to store more data, we will call zlib_deflate with a NULL output buffer until we've consumed remaining input. When this happens, olen contains the size the output buffer would have consumed iff we'd have had enough room. This can later cause skb_over_panic when ppp_generic skb_put()s the returned length. Reported-by: Iain Douglas Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- drivers/net/ppp/ppp_deflate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ppp/ppp_deflate.c b/drivers/net/ppp/ppp_deflate.c index 602c625d95d5..b5edc7f96a39 100644 --- a/drivers/net/ppp/ppp_deflate.c +++ b/drivers/net/ppp/ppp_deflate.c @@ -246,7 +246,7 @@ static int z_compress(void *arg, unsigned char *rptr, unsigned char *obuf, /* * See if we managed to reduce the size of the packet. */ - if (olen < isize) { + if (olen < isize && olen <= osize) { state->stats.comp_bytes += olen; state->stats.comp_packets++; } else { -- cgit v1.2.3 From fc9a5707832e57f2317c89101fbe9d4ccbd62fa6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 28 Jan 2015 15:15:01 +0100 Subject: net: cs89x0: always build platform code if !HAS_IOPORT_MAP The cs89x0 driver can either be built as an ISA driver or a platform driver, the choice is controlled by the CS89x0_PLATFORM Kconfig symbol. Building the ISA driver on a system that does not have a way to map I/O ports fails with this error: drivers/built-in.o: In function `cs89x0_ioport_probe.constprop.1': :(.init.text+0x4794): undefined reference to `ioport_map' :(.init.text+0x4830): undefined reference to `ioport_unmap' This changes the Kconfig logic to take that option away and always force building the platform variant of this driver if CONFIG_HAS_IOPORT_MAP is not set. This is the only correct choice in this case, and it avoids the build error. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/cirrus/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig index 7403dff8f14a..905ac5f5d9a6 100644 --- a/drivers/net/ethernet/cirrus/Kconfig +++ b/drivers/net/ethernet/cirrus/Kconfig @@ -32,7 +32,8 @@ config CS89x0 will be called cs89x0. config CS89x0_PLATFORM - bool "CS89x0 platform driver support" + bool "CS89x0 platform driver support" if HAS_IOPORT_MAP + default !HAS_IOPORT_MAP depends on CS89x0 help Say Y to compile the cs89x0 driver as a platform driver. This -- cgit v1.2.3 From 303c28d859cc7ab0f1f37acdd4aadf87c6e86743 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 28 Jan 2015 15:15:02 +0100 Subject: net: wan: add missing virt_to_bus dependencies The cosa driver is rather outdated and does not get built on most platforms because it requires the ISA_DMA_API symbol. However there are some ARM platforms that have ISA_DMA_API but no virt_to_bus, and they get this build error when enabling the ltpc driver. drivers/net/wan/cosa.c: In function 'tx_interrupt': drivers/net/wan/cosa.c:1768:3: error: implicit declaration of function 'virt_to_bus' unsigned long addr = virt_to_bus(cosa->txbuf); ^ The same problem exists for the Hostess SV-11 and Sealevel Systems 4021 drivers. This adds another dependency in Kconfig to avoid that configuration. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/wan/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 94e234975c61..a2fdd15f285a 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -25,7 +25,7 @@ if WAN # There is no way to detect a comtrol sv11 - force it modular for now. config HOSTESS_SV11 tristate "Comtrol Hostess SV-11 support" - depends on ISA && m && ISA_DMA_API && INET && HDLC + depends on ISA && m && ISA_DMA_API && INET && HDLC && VIRT_TO_BUS help Driver for Comtrol Hostess SV-11 network card which operates on low speed synchronous serial links at up to @@ -37,7 +37,7 @@ config HOSTESS_SV11 # The COSA/SRP driver has not been tested as non-modular yet. config COSA tristate "COSA/SRP sync serial boards support" - depends on ISA && m && ISA_DMA_API && HDLC + depends on ISA && m && ISA_DMA_API && HDLC && VIRT_TO_BUS ---help--- Driver for COSA and SRP synchronous serial boards. @@ -87,7 +87,7 @@ config LANMEDIA # There is no way to detect a Sealevel board. Force it modular config SEALEVEL_4021 tristate "Sealevel Systems 4021 support" - depends on ISA && m && ISA_DMA_API && INET && HDLC + depends on ISA && m && ISA_DMA_API && INET && HDLC && VIRT_TO_BUS help This is a driver for the Sealevel Systems ACB 56 serial I/O adapter. -- cgit v1.2.3 From e9b106b8fbdb98ceab2dfa46cebe097bd1a47bac Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 28 Jan 2015 15:15:03 +0100 Subject: net: lance,ni64: don't build for ARM The ni65 and lance ethernet drivers manually program the ISA DMA controller that is only available on x86 PCs and a few compatible systems. Trying to build it on ARM results in this error: ni65.c: In function 'ni65_probe1': ni65.c:496:62: error: 'DMA1_STAT_REG' undeclared (first use in this function) ((inb(DMA1_STAT_REG) >> 4) & 0x0f) ^ ni65.c:496:62: note: each undeclared identifier is reported only once for each function it appears in ni65.c:497:63: error: 'DMA2_STAT_REG' undeclared (first use in this function) | (inb(DMA2_STAT_REG) & 0xf0); The DMA1_STAT_REG and DMA2_STAT_REG registers are only defined for alpha, mips, parisc, powerpc and x86, although it is not clear which subarchitectures actually have them at the correct location. This patch for now just disables it for ARM, to avoid randconfig build errors. We could also decide to limit it to the set of architectures on which it does compile, but that might look more deliberate than guessing based on where the drivers build. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index 7a5e4aa5415e..77f1f6048ddd 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -45,7 +45,7 @@ config AMD8111_ETH config LANCE tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" - depends on ISA && ISA_DMA_API + depends on ISA && ISA_DMA_API && !ARM ---help--- If you have a network (Ethernet) card of this type, say Y and read the Ethernet-HOWTO, available from @@ -142,7 +142,7 @@ config PCMCIA_NMCLAN config NI65 tristate "NI6510 support" - depends on ISA && ISA_DMA_API + depends on ISA && ISA_DMA_API && !ARM ---help--- If you have a network (Ethernet) card of this type, say Y and read the Ethernet-HOWTO, available from -- cgit v1.2.3 From 96a30175f927facfb421655ef08b7a0fe546fbed Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 28 Jan 2015 15:15:04 +0100 Subject: net: am2150: fix nmclan_cs.c shared interrupt handling A recent patch tried to work around a valid warning for the use of a deprecated interface by blindly changing from the old pcmcia_request_exclusive_irq() interface to pcmcia_request_irq(). This driver has an interrupt handler that is not currently aware of shared interrupts, but can be easily converted to be. At the moment, the driver reads the interrupt status register repeatedly until it contains only zeroes in the interesting bits, and handles each bit individually. This patch adds the missing part of returning IRQ_NONE in case none of the bits are set to start with, so we can move on to the next interrupt source. Signed-off-by: Arnd Bergmann Fixes: 5f5316fcd08ef7 ("am2150: Update nmclan_cs.c to use update PCMCIA API") Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/nmclan_cs.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/nmclan_cs.c b/drivers/net/ethernet/amd/nmclan_cs.c index 5b22764ba88d..27245efe9f50 100644 --- a/drivers/net/ethernet/amd/nmclan_cs.c +++ b/drivers/net/ethernet/amd/nmclan_cs.c @@ -952,6 +952,8 @@ static irqreturn_t mace_interrupt(int irq, void *dev_id) do { /* WARNING: MACE_IR is a READ/CLEAR port! */ status = inb(ioaddr + AM2150_MACE_BASE + MACE_IR); + if (!(status & ~MACE_IMR_DEFAULT) && IntrCnt == MACE_MAX_IR_ITERATIONS) + return IRQ_NONE; pr_debug("mace_interrupt: irq 0x%X status 0x%X.\n", irq, status); -- cgit v1.2.3 From 2148f18fdb45f31ca269a7787fbc24053cd42e70 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 26 Jan 2015 10:11:08 -0500 Subject: drm: fix fb-helper vs MST dangling connector ptrs (v2) VT switch back/forth from console to xserver (for example) has potential to go horribly wrong if a dynamic DP MST connector ends up in the saved modeset that is restored when switching back to fbcon. When removing a dynamic connector, don't forget to clean up the saved state. v1: original v2: null out set->fb if no more connectors to avoid making i915 cranky Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1184968 Cc: stable@vger.kernel.org #v3.17+ Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index cf775a4449c1..dc386ebe5193 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -145,6 +145,31 @@ int drm_fb_helper_add_one_connector(struct drm_fb_helper *fb_helper, struct drm_ } EXPORT_SYMBOL(drm_fb_helper_add_one_connector); +static void remove_from_modeset(struct drm_mode_set *set, + struct drm_connector *connector) +{ + int i, j; + + for (i = 0; i < set->num_connectors; i++) { + if (set->connectors[i] == connector) + break; + } + + if (i == set->num_connectors) + return; + + for (j = i + 1; j < set->num_connectors; j++) { + set->connectors[j - 1] = set->connectors[j]; + } + set->num_connectors--; + + /* because i915 is pissy about this.. + * TODO maybe need to makes sure we set it back to !=NULL somewhere? + */ + if (set->num_connectors == 0) + set->fb = NULL; +} + int drm_fb_helper_remove_one_connector(struct drm_fb_helper *fb_helper, struct drm_connector *connector) { @@ -167,6 +192,11 @@ int drm_fb_helper_remove_one_connector(struct drm_fb_helper *fb_helper, } fb_helper->connector_count--; kfree(fb_helper_connector); + + /* also cleanup dangling references to the connector: */ + for (i = 0; i < fb_helper->crtc_count; i++) + remove_from_modeset(&fb_helper->crtc_info[i].mode_set, connector); + return 0; } EXPORT_SYMBOL(drm_fb_helper_remove_one_connector); -- cgit v1.2.3 From 0f303db08df0df9bd0966443ad6001e63960af16 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 Jan 2015 12:02:45 +0100 Subject: gpio: sysfs: fix memory leak in gpiod_export_link Fix memory leak in the gpio sysfs interface due to failure to drop reference to device returned by class_find_device when creating a link. Fixes: a4177ee7f1a8 ("gpiolib: allow exported GPIO nodes to be named using sysfs links") Cc: stable # v2.6.32 Signed-off-by: Johan Hovold Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib-sysfs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c index f62aa115d79a..4667830f350e 100644 --- a/drivers/gpio/gpiolib-sysfs.c +++ b/drivers/gpio/gpiolib-sysfs.c @@ -648,6 +648,7 @@ int gpiod_export_link(struct device *dev, const char *name, if (tdev != NULL) { status = sysfs_create_link(&dev->kobj, &tdev->kobj, name); + put_device(tdev); } else { status = -ENODEV; } -- cgit v1.2.3 From 49d2ca84e433dab854c7a866bc6add09cfab682d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 Jan 2015 12:02:46 +0100 Subject: gpio: sysfs: fix memory leak in gpiod_sysfs_set_active_low Fix memory leak in the gpio sysfs interface due to failure to drop reference to device returned by class_find_device when setting the gpio-line polarity. Fixes: 0769746183ca ("gpiolib: add support for changing value polarity in sysfs") Cc: stable # v2.6.33 Signed-off-by: Johan Hovold Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c index 4667830f350e..7722ed53bd65 100644 --- a/drivers/gpio/gpiolib-sysfs.c +++ b/drivers/gpio/gpiolib-sysfs.c @@ -696,7 +696,7 @@ int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value) } status = sysfs_set_active_low(desc, dev, value); - + put_device(dev); unlock: mutex_unlock(&sysfs_lock); -- cgit v1.2.3 From 32e224090fa310a58fdb47049caf631272ceb044 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 29 Jan 2015 18:33:16 +0100 Subject: i2c: sh_mobile: terminate DMA reads properly DMA read requests could miss proper termination, so two more bytes would have been read via PIO overwriting the end of the buffer with wrong data. Make DMA stop handling more readable while we are here. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-sh_mobile.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 440d5dbc8b5f..007818b3e174 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -139,6 +139,7 @@ struct sh_mobile_i2c_data { int pos; int sr; bool send_stop; + bool stop_after_dma; struct resource *res; struct dma_chan *dma_tx; @@ -407,7 +408,7 @@ static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd) if (pd->pos == pd->msg->len) { /* Send stop if we haven't yet (DMA case) */ - if (pd->send_stop && (iic_rd(pd, ICCR) & ICCR_BBSY)) + if (pd->send_stop && pd->stop_after_dma) i2c_op(pd, OP_TX_STOP, 0); return 1; } @@ -449,6 +450,13 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd) real_pos = pd->pos - 2; if (pd->pos == pd->msg->len) { + if (pd->stop_after_dma) { + /* Simulate PIO end condition after DMA transfer */ + i2c_op(pd, OP_RX_STOP, 0); + pd->pos++; + break; + } + if (real_pos < 0) { i2c_op(pd, OP_RX_STOP, 0); break; @@ -536,6 +544,7 @@ static void sh_mobile_i2c_dma_callback(void *data) sh_mobile_i2c_dma_unmap(pd); pd->pos = pd->msg->len; + pd->stop_after_dma = true; iic_set_clr(pd, ICIC, 0, ICIC_TDMAE | ICIC_RDMAE); } @@ -726,6 +735,7 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, bool do_start = pd->send_stop || !i; msg = &msgs[i]; pd->send_stop = i == num - 1 || msg->flags & I2C_M_STOP; + pd->stop_after_dma = false; err = start_ch(pd, msg, do_start); if (err) -- cgit v1.2.3 From a84544a4feb2cf5cafdf3cce3269da0c3b4fcc45 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 30 Jan 2015 15:38:35 -0800 Subject: Revert "IPoIB: No longer use flush as a parameter" This reverts commit ce347ab90eaabc69a6146d41943981d51e7a9b82. The series of IPoIB bug fixes that went into 3.19-rc1 introduce regressions, and after trying to sort things out, we decided to revert to 3.18's IPoIB driver and get things right for 3.20. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 6 +++--- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 19 ++++++++++--------- drivers/infiniband/ulp/ipoib/ipoib_main.c | 8 ++++---- 3 files changed, 17 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 8ba80a6d3a46..28dc927c0e8b 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -484,10 +484,10 @@ void ipoib_ib_dev_flush_heavy(struct work_struct *work); void ipoib_pkey_event(struct work_struct *work); void ipoib_ib_dev_cleanup(struct net_device *dev); -int ipoib_ib_dev_open(struct net_device *dev); +int ipoib_ib_dev_open(struct net_device *dev, int flush); int ipoib_ib_dev_up(struct net_device *dev); -int ipoib_ib_dev_down(struct net_device *dev); -int ipoib_ib_dev_stop(struct net_device *dev); +int ipoib_ib_dev_down(struct net_device *dev, int flush); +int ipoib_ib_dev_stop(struct net_device *dev, int flush); void ipoib_pkey_dev_check_presence(struct net_device *dev); int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index fe65abb5150c..660967871191 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -664,7 +664,7 @@ static void ipoib_ib_tx_timer_func(unsigned long ctx) drain_tx_cq((struct net_device *)ctx); } -int ipoib_ib_dev_open(struct net_device *dev) +int ipoib_ib_dev_open(struct net_device *dev, int flush) { struct ipoib_dev_priv *priv = netdev_priv(dev); int ret; @@ -706,7 +706,7 @@ int ipoib_ib_dev_open(struct net_device *dev) dev_stop: if (!test_and_set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags)) napi_enable(&priv->napi); - ipoib_ib_dev_stop(dev); + ipoib_ib_dev_stop(dev, flush); return -1; } @@ -738,7 +738,7 @@ int ipoib_ib_dev_up(struct net_device *dev) return ipoib_mcast_start_thread(dev); } -int ipoib_ib_dev_down(struct net_device *dev) +int ipoib_ib_dev_down(struct net_device *dev, int flush) { struct ipoib_dev_priv *priv = netdev_priv(dev); @@ -807,7 +807,7 @@ void ipoib_drain_cq(struct net_device *dev) local_bh_enable(); } -int ipoib_ib_dev_stop(struct net_device *dev) +int ipoib_ib_dev_stop(struct net_device *dev, int flush) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ib_qp_attr qp_attr; @@ -880,7 +880,8 @@ timeout: /* Wait for all AHs to be reaped */ set_bit(IPOIB_STOP_REAPER, &priv->flags); cancel_delayed_work(&priv->ah_reap_task); - flush_workqueue(priv->wq); + if (flush) + flush_workqueue(priv->wq); begin = jiffies; @@ -917,7 +918,7 @@ int ipoib_ib_dev_init(struct net_device *dev, struct ib_device *ca, int port) (unsigned long) dev); if (dev->flags & IFF_UP) { - if (ipoib_ib_dev_open(dev)) { + if (ipoib_ib_dev_open(dev, 1)) { ipoib_transport_dev_cleanup(dev); return -ENODEV; } @@ -1039,12 +1040,12 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv, } if (level >= IPOIB_FLUSH_NORMAL) - ipoib_ib_dev_down(dev); + ipoib_ib_dev_down(dev, 0); if (level == IPOIB_FLUSH_HEAVY) { if (test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags)) - ipoib_ib_dev_stop(dev); - if (ipoib_ib_dev_open(dev) != 0) + ipoib_ib_dev_stop(dev, 0); + if (ipoib_ib_dev_open(dev, 0) != 0) return; if (netif_queue_stopped(dev)) netif_start_queue(dev); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 6bad17d4d588..42e5c278f489 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -108,7 +108,7 @@ int ipoib_open(struct net_device *dev) set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); - if (ipoib_ib_dev_open(dev)) { + if (ipoib_ib_dev_open(dev, 1)) { if (!test_bit(IPOIB_PKEY_ASSIGNED, &priv->flags)) return 0; goto err_disable; @@ -139,7 +139,7 @@ int ipoib_open(struct net_device *dev) return 0; err_stop: - ipoib_ib_dev_stop(dev); + ipoib_ib_dev_stop(dev, 1); err_disable: clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); @@ -157,8 +157,8 @@ static int ipoib_stop(struct net_device *dev) netif_stop_queue(dev); - ipoib_ib_dev_down(dev); - ipoib_ib_dev_stop(dev); + ipoib_ib_dev_down(dev, 1); + ipoib_ib_dev_stop(dev, 0); if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) { struct ipoib_dev_priv *cpriv; -- cgit v1.2.3 From 4e0ab200fa4594d16bb7fc697ec4d9edfb5a43f0 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 30 Jan 2015 15:38:46 -0800 Subject: Revert "IPoIB: Make ipoib_mcast_stop_thread flush the workqueue" This reverts commit bb42a6dd02fb2901a69dbec2358810735b14b186. The series of IPoIB bug fixes that went into 3.19-rc1 introduce regressions, and after trying to sort things out, we decided to revert to 3.18's IPoIB driver and get things right for 3.20. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 2 +- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 4 ++-- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 21 ++++++++++++--------- 3 files changed, 15 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 28dc927c0e8b..45fd10a72ec1 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -499,7 +499,7 @@ void ipoib_mcast_send(struct net_device *dev, u8 *daddr, struct sk_buff *skb); void ipoib_mcast_restart_task(struct work_struct *work); int ipoib_mcast_start_thread(struct net_device *dev); -int ipoib_mcast_stop_thread(struct net_device *dev); +int ipoib_mcast_stop_thread(struct net_device *dev, int flush); void ipoib_mcast_dev_down(struct net_device *dev); void ipoib_mcast_dev_flush(struct net_device *dev); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 660967871191..bfd17d41b5f2 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -747,7 +747,7 @@ int ipoib_ib_dev_down(struct net_device *dev, int flush) clear_bit(IPOIB_FLAG_OPER_UP, &priv->flags); netif_carrier_off(dev); - ipoib_mcast_stop_thread(dev); + ipoib_mcast_stop_thread(dev, flush); ipoib_mcast_dev_flush(dev); ipoib_flush_paths(dev); @@ -1097,7 +1097,7 @@ void ipoib_ib_dev_cleanup(struct net_device *dev) */ ipoib_flush_paths(dev); - ipoib_mcast_stop_thread(dev); + ipoib_mcast_stop_thread(dev, 1); ipoib_mcast_dev_flush(dev); ipoib_transport_dev_cleanup(dev); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index bc50dd0d0e4d..845f910eb214 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -648,7 +648,7 @@ int ipoib_mcast_start_thread(struct net_device *dev) return 0; } -int ipoib_mcast_stop_thread(struct net_device *dev) +int ipoib_mcast_stop_thread(struct net_device *dev, int flush) { struct ipoib_dev_priv *priv = netdev_priv(dev); @@ -659,7 +659,8 @@ int ipoib_mcast_stop_thread(struct net_device *dev) cancel_delayed_work(&priv->mcast_task); mutex_unlock(&mcast_mutex); - flush_workqueue(priv->wq); + if (flush) + flush_workqueue(priv->wq); return 0; } @@ -837,6 +838,8 @@ void ipoib_mcast_restart_task(struct work_struct *work) ipoib_dbg_mcast(priv, "restarting multicast task\n"); + ipoib_mcast_stop_thread(dev, 0); + local_irq_save(flags); netif_addr_lock(dev); spin_lock(&priv->lock); @@ -933,10 +936,13 @@ void ipoib_mcast_restart_task(struct work_struct *work) * We have to cancel outside of the spinlock, but we have to * take the rtnl lock or else we race with the removal of * entries from the remove list in mcast_dev_flush as part - * of ipoib_stop(). We detect the drop of the ADMIN_UP flag - * to signal that we have hit this particular race, and we - * return since we know we don't need to do anything else - * anyway. + * of ipoib_stop() which will call mcast_stop_thread with + * flush == 1 while holding the rtnl lock, and the + * flush_workqueue won't complete until this restart_mcast_task + * completes. So do like the carrier on task and attempt to + * take the rtnl lock, but if we can't before the ADMIN_UP flag + * goes away, then just return and know that the remove list will + * get flushed later by mcast_stop_thread. */ while (!rtnl_trylock()) { if (!test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) @@ -948,9 +954,6 @@ void ipoib_mcast_restart_task(struct work_struct *work) ipoib_mcast_leave(mcast->dev, mcast); ipoib_mcast_free(mcast); } - /* - * Restart our join task if needed - */ ipoib_mcast_start_thread(dev); rtnl_unlock(); } -- cgit v1.2.3 From 0306eda2269f961d77c09b1badc0031438c21f44 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 30 Jan 2015 15:38:55 -0800 Subject: Revert "IPoIB: Use dedicated workqueues per interface" This reverts commit 5141861cd5e17eac9676ff49c5abfafbea2b0e98. The series of IPoIB bug fixes that went into 3.19-rc1 introduce regressions, and after trying to sort things out, we decided to revert to 3.18's IPoIB driver and get things right for 3.20. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 1 - drivers/infiniband/ulp/ipoib/ipoib_cm.c | 18 +++++++++--------- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 6 +++--- drivers/infiniband/ulp/ipoib/ipoib_main.c | 19 +++++++------------ drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 26 ++++++++++++++------------ drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 22 +--------------------- 6 files changed, 34 insertions(+), 58 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 45fd10a72ec1..f4c1b20b23b2 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -323,7 +323,6 @@ struct ipoib_dev_priv { struct list_head multicast_list; struct rb_root multicast_tree; - struct workqueue_struct *wq; struct delayed_work mcast_task; struct work_struct carrier_on_task; struct work_struct flush_light; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 56959adb6c7d..933efcea0d03 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -474,7 +474,7 @@ static int ipoib_cm_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *even } spin_lock_irq(&priv->lock); - queue_delayed_work(priv->wq, + queue_delayed_work(ipoib_workqueue, &priv->cm.stale_task, IPOIB_CM_RX_DELAY); /* Add this entry to passive ids list head, but do not re-add it * if IB_EVENT_QP_LAST_WQE_REACHED has moved it to flush list. */ @@ -576,7 +576,7 @@ void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) spin_lock_irqsave(&priv->lock, flags); list_splice_init(&priv->cm.rx_drain_list, &priv->cm.rx_reap_list); ipoib_cm_start_rx_drain(priv); - queue_work(priv->wq, &priv->cm.rx_reap_task); + queue_work(ipoib_workqueue, &priv->cm.rx_reap_task); spin_unlock_irqrestore(&priv->lock, flags); } else ipoib_warn(priv, "cm recv completion event with wrid %d (> %d)\n", @@ -603,7 +603,7 @@ void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) spin_lock_irqsave(&priv->lock, flags); list_move(&p->list, &priv->cm.rx_reap_list); spin_unlock_irqrestore(&priv->lock, flags); - queue_work(priv->wq, &priv->cm.rx_reap_task); + queue_work(ipoib_workqueue, &priv->cm.rx_reap_task); } return; } @@ -827,7 +827,7 @@ void ipoib_cm_handle_tx_wc(struct net_device *dev, struct ib_wc *wc) if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &tx->flags)) { list_move(&tx->list, &priv->cm.reap_list); - queue_work(priv->wq, &priv->cm.reap_task); + queue_work(ipoib_workqueue, &priv->cm.reap_task); } clear_bit(IPOIB_FLAG_OPER_UP, &tx->flags); @@ -1255,7 +1255,7 @@ static int ipoib_cm_tx_handler(struct ib_cm_id *cm_id, if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &tx->flags)) { list_move(&tx->list, &priv->cm.reap_list); - queue_work(priv->wq, &priv->cm.reap_task); + queue_work(ipoib_workqueue, &priv->cm.reap_task); } spin_unlock_irqrestore(&priv->lock, flags); @@ -1284,7 +1284,7 @@ struct ipoib_cm_tx *ipoib_cm_create_tx(struct net_device *dev, struct ipoib_path tx->dev = dev; list_add(&tx->list, &priv->cm.start_list); set_bit(IPOIB_FLAG_INITIALIZED, &tx->flags); - queue_work(priv->wq, &priv->cm.start_task); + queue_work(ipoib_workqueue, &priv->cm.start_task); return tx; } @@ -1295,7 +1295,7 @@ void ipoib_cm_destroy_tx(struct ipoib_cm_tx *tx) if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &tx->flags)) { spin_lock_irqsave(&priv->lock, flags); list_move(&tx->list, &priv->cm.reap_list); - queue_work(priv->wq, &priv->cm.reap_task); + queue_work(ipoib_workqueue, &priv->cm.reap_task); ipoib_dbg(priv, "Reap connection for gid %pI6\n", tx->neigh->daddr + 4); tx->neigh = NULL; @@ -1417,7 +1417,7 @@ void ipoib_cm_skb_too_long(struct net_device *dev, struct sk_buff *skb, skb_queue_tail(&priv->cm.skb_queue, skb); if (e) - queue_work(priv->wq, &priv->cm.skb_task); + queue_work(ipoib_workqueue, &priv->cm.skb_task); } static void ipoib_cm_rx_reap(struct work_struct *work) @@ -1450,7 +1450,7 @@ static void ipoib_cm_stale_task(struct work_struct *work) } if (!list_empty(&priv->cm.passive_ids)) - queue_delayed_work(priv->wq, + queue_delayed_work(ipoib_workqueue, &priv->cm.stale_task, IPOIB_CM_RX_DELAY); spin_unlock_irq(&priv->lock); } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index bfd17d41b5f2..72626c348174 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -655,7 +655,7 @@ void ipoib_reap_ah(struct work_struct *work) __ipoib_reap_ah(dev); if (!test_bit(IPOIB_STOP_REAPER, &priv->flags)) - queue_delayed_work(priv->wq, &priv->ah_reap_task, + queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task, round_jiffies_relative(HZ)); } @@ -696,7 +696,7 @@ int ipoib_ib_dev_open(struct net_device *dev, int flush) } clear_bit(IPOIB_STOP_REAPER, &priv->flags); - queue_delayed_work(priv->wq, &priv->ah_reap_task, + queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task, round_jiffies_relative(HZ)); if (!test_and_set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags)) @@ -881,7 +881,7 @@ timeout: set_bit(IPOIB_STOP_REAPER, &priv->flags); cancel_delayed_work(&priv->ah_reap_task); if (flush) - flush_workqueue(priv->wq); + flush_workqueue(ipoib_workqueue); begin = jiffies; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 42e5c278f489..2cf81ef51412 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -839,7 +839,7 @@ static void ipoib_set_mcast_list(struct net_device *dev) return; } - queue_work(priv->wq, &priv->restart_task); + queue_work(ipoib_workqueue, &priv->restart_task); } static u32 ipoib_addr_hash(struct ipoib_neigh_hash *htbl, u8 *daddr) @@ -954,7 +954,7 @@ static void ipoib_reap_neigh(struct work_struct *work) __ipoib_reap_neigh(priv); if (!test_bit(IPOIB_STOP_NEIGH_GC, &priv->flags)) - queue_delayed_work(priv->wq, &priv->neigh_reap_task, + queue_delayed_work(ipoib_workqueue, &priv->neigh_reap_task, arp_tbl.gc_interval); } @@ -1133,7 +1133,7 @@ static int ipoib_neigh_hash_init(struct ipoib_dev_priv *priv) /* start garbage collection */ clear_bit(IPOIB_STOP_NEIGH_GC, &priv->flags); - queue_delayed_work(priv->wq, &priv->neigh_reap_task, + queue_delayed_work(ipoib_workqueue, &priv->neigh_reap_task, arp_tbl.gc_interval); return 0; @@ -1293,7 +1293,7 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port) return 0; out_dev_uninit: - ipoib_ib_dev_cleanup(dev); + ipoib_ib_dev_cleanup(); out_tx_ring_cleanup: vfree(priv->tx_ring); @@ -1646,7 +1646,7 @@ register_failed: /* Stop GC if started before flush */ set_bit(IPOIB_STOP_NEIGH_GC, &priv->flags); cancel_delayed_work(&priv->neigh_reap_task); - flush_workqueue(priv->wq); + flush_workqueue(ipoib_workqueue); event_failed: ipoib_dev_cleanup(priv->dev); @@ -1717,7 +1717,7 @@ static void ipoib_remove_one(struct ib_device *device) /* Stop GC */ set_bit(IPOIB_STOP_NEIGH_GC, &priv->flags); cancel_delayed_work(&priv->neigh_reap_task); - flush_workqueue(priv->wq); + flush_workqueue(ipoib_workqueue); unregister_netdev(priv->dev); free_netdev(priv->dev); @@ -1758,13 +1758,8 @@ static int __init ipoib_init_module(void) * unregister_netdev() and linkwatch_event take the rtnl lock, * so flush_scheduled_work() can deadlock during device * removal. - * - * In addition, bringing one device up and another down at the - * same time can deadlock a single workqueue, so we have this - * global fallback workqueue, but we also attempt to open a - * per device workqueue each time we bring an interface up */ - ipoib_workqueue = create_singlethread_workqueue("ipoib_flush"); + ipoib_workqueue = create_singlethread_workqueue("ipoib"); if (!ipoib_workqueue) { ret = -ENOMEM; goto err_fs; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 845f910eb214..41325960e4e0 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -388,7 +388,7 @@ void ipoib_mcast_carrier_on_task(struct work_struct *work) * the workqueue while holding the rtnl lock, so loop * on trylock until either we get the lock or we see * FLAG_ADMIN_UP go away as that signals that we are bailing - * and can safely ignore the carrier on work. + * and can safely ignore the carrier on work */ while (!rtnl_trylock()) { if (!test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) @@ -432,14 +432,15 @@ static int ipoib_mcast_join_complete(int status, if (!status) { mcast->backoff = 1; if (test_bit(IPOIB_MCAST_RUN, &priv->flags)) - queue_delayed_work(priv->wq, &priv->mcast_task, 0); + queue_delayed_work(ipoib_workqueue, + &priv->mcast_task, 0); /* - * Defer carrier on work to priv->wq to avoid a + * Defer carrier on work to ipoib_workqueue to avoid a * deadlock on rtnl_lock here. */ if (mcast == priv->broadcast) - queue_work(priv->wq, &priv->carrier_on_task); + queue_work(ipoib_workqueue, &priv->carrier_on_task); } else { if (mcast->logcount++ < 20) { if (status == -ETIMEDOUT || status == -EAGAIN) { @@ -464,7 +465,7 @@ out: if (status == -ENETRESET) status = 0; if (status && test_bit(IPOIB_MCAST_RUN, &priv->flags)) - queue_delayed_work(priv->wq, &priv->mcast_task, + queue_delayed_work(ipoib_workqueue, &priv->mcast_task, mcast->backoff * HZ); spin_unlock_irq(&priv->lock); mutex_unlock(&mcast_mutex); @@ -534,7 +535,8 @@ static void ipoib_mcast_join(struct net_device *dev, struct ipoib_mcast *mcast, mcast->backoff = IPOIB_MAX_BACKOFF_SECONDS; if (test_bit(IPOIB_MCAST_RUN, &priv->flags)) - queue_delayed_work(priv->wq, &priv->mcast_task, + queue_delayed_work(ipoib_workqueue, + &priv->mcast_task, mcast->backoff * HZ); } mutex_unlock(&mcast_mutex); @@ -574,8 +576,8 @@ void ipoib_mcast_join_task(struct work_struct *work) ipoib_warn(priv, "failed to allocate broadcast group\n"); mutex_lock(&mcast_mutex); if (test_bit(IPOIB_MCAST_RUN, &priv->flags)) - queue_delayed_work(priv->wq, &priv->mcast_task, - HZ); + queue_delayed_work(ipoib_workqueue, + &priv->mcast_task, HZ); mutex_unlock(&mcast_mutex); return; } @@ -642,7 +644,7 @@ int ipoib_mcast_start_thread(struct net_device *dev) mutex_lock(&mcast_mutex); if (!test_and_set_bit(IPOIB_MCAST_RUN, &priv->flags)) - queue_delayed_work(priv->wq, &priv->mcast_task, 0); + queue_delayed_work(ipoib_workqueue, &priv->mcast_task, 0); mutex_unlock(&mcast_mutex); return 0; @@ -660,7 +662,7 @@ int ipoib_mcast_stop_thread(struct net_device *dev, int flush) mutex_unlock(&mcast_mutex); if (flush) - flush_workqueue(priv->wq); + flush_workqueue(ipoib_workqueue); return 0; } @@ -727,7 +729,7 @@ void ipoib_mcast_send(struct net_device *dev, u8 *daddr, struct sk_buff *skb) __ipoib_mcast_add(dev, mcast); list_add_tail(&mcast->list, &priv->multicast_list); if (!test_and_set_bit(IPOIB_MCAST_RUN, &priv->flags)) - queue_delayed_work(priv->wq, &priv->mcast_task, 0); + queue_delayed_work(ipoib_workqueue, &priv->mcast_task, 0); } if (!mcast->ah) { @@ -942,7 +944,7 @@ void ipoib_mcast_restart_task(struct work_struct *work) * completes. So do like the carrier on task and attempt to * take the rtnl lock, but if we can't before the ADMIN_UP flag * goes away, then just return and know that the remove list will - * get flushed later by mcast_stop_thread. + * get flushed later by mcast_dev_flush. */ while (!rtnl_trylock()) { if (!test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index b72a753eb41d..c56d5d44c53b 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -145,20 +145,10 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca) int ret, size; int i; - /* - * the various IPoIB tasks assume they will never race against - * themselves, so always use a single thread workqueue - */ - priv->wq = create_singlethread_workqueue("ipoib_wq"); - if (!priv->wq) { - printk(KERN_WARNING "ipoib: failed to allocate device WQ\n"); - return -ENODEV; - } - priv->pd = ib_alloc_pd(priv->ca); if (IS_ERR(priv->pd)) { printk(KERN_WARNING "%s: failed to allocate PD\n", ca->name); - goto out_free_wq; + return -ENODEV; } priv->mr = ib_get_dma_mr(priv->pd, IB_ACCESS_LOCAL_WRITE); @@ -252,10 +242,6 @@ out_free_mr: out_free_pd: ib_dealloc_pd(priv->pd); - -out_free_wq: - destroy_workqueue(priv->wq); - priv->wq = NULL; return -ENODEV; } @@ -284,12 +270,6 @@ void ipoib_transport_dev_cleanup(struct net_device *dev) if (ib_dealloc_pd(priv->pd)) ipoib_warn(priv, "ib_dealloc_pd failed\n"); - - if (priv->wq) { - flush_workqueue(priv->wq); - destroy_workqueue(priv->wq); - priv->wq = NULL; - } } void ipoib_event(struct ib_event_handler *handler, -- cgit v1.2.3 From bb75963414906cf2eda59f09b42bb99f0c8c8318 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 30 Jan 2015 15:39:02 -0800 Subject: Revert "IPoIB: change init sequence ordering" This reverts commit 3bcce487fda8161597c20ed303d510e41ad7770e. The series of IPoIB bug fixes that went into 3.19-rc1 introduce regressions, and after trying to sort things out, we decided to revert to 3.18's IPoIB driver and get things right for 3.20. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 2cf81ef51412..58b5aa3b6f2d 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1262,13 +1262,15 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port) { struct ipoib_dev_priv *priv = netdev_priv(dev); + if (ipoib_neigh_hash_init(priv) < 0) + goto out; /* Allocate RX/TX "rings" to hold queued skbs */ priv->rx_ring = kzalloc(ipoib_recvq_size * sizeof *priv->rx_ring, GFP_KERNEL); if (!priv->rx_ring) { printk(KERN_WARNING "%s: failed to allocate RX ring (%d entries)\n", ca->name, ipoib_recvq_size); - goto out; + goto out_neigh_hash_cleanup; } priv->tx_ring = vzalloc(ipoib_sendq_size * sizeof *priv->tx_ring); @@ -1283,24 +1285,16 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port) if (ipoib_ib_dev_init(dev, ca, port)) goto out_tx_ring_cleanup; - /* - * Must be after ipoib_ib_dev_init so we can allocate a per - * device wq there and use it here - */ - if (ipoib_neigh_hash_init(priv) < 0) - goto out_dev_uninit; - return 0; -out_dev_uninit: - ipoib_ib_dev_cleanup(); - out_tx_ring_cleanup: vfree(priv->tx_ring); out_rx_ring_cleanup: kfree(priv->rx_ring); +out_neigh_hash_cleanup: + ipoib_neigh_hash_uninit(dev); out: return -ENOMEM; } @@ -1323,12 +1317,6 @@ void ipoib_dev_cleanup(struct net_device *dev) } unregister_netdevice_many(&head); - /* - * Must be before ipoib_ib_dev_cleanup or we delete an in use - * work queue - */ - ipoib_neigh_hash_uninit(dev); - ipoib_ib_dev_cleanup(dev); kfree(priv->rx_ring); @@ -1336,6 +1324,8 @@ void ipoib_dev_cleanup(struct net_device *dev) priv->rx_ring = NULL; priv->tx_ring = NULL; + + ipoib_neigh_hash_uninit(dev); } static const struct header_ops ipoib_header_ops = { -- cgit v1.2.3 From 962121b4fcd3e022c276104aec50b56d7ed1f71b Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 30 Jan 2015 15:39:11 -0800 Subject: Revert "IPoIB: fix mcast_dev_flush/mcast_restart_task race" This reverts commit e5d1dcf1b0951f4ba00d93653942dda6196109d8. The series of IPoIB bug fixes that went into 3.19-rc1 introduce regressions, and after trying to sort things out, we decided to revert to 3.18's IPoIB driver and get things right for 3.20. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 37 ++++---------------------- 1 file changed, 5 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 41325960e4e0..a52c9f3f7e42 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -802,10 +802,7 @@ void ipoib_mcast_dev_flush(struct net_device *dev) spin_unlock_irqrestore(&priv->lock, flags); - /* - * make sure the in-flight joins have finished before we attempt - * to leave - */ + /* seperate between the wait to the leave*/ list_for_each_entry_safe(mcast, tmcast, &remove_list, list) if (test_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags)) wait_for_completion(&mcast->done); @@ -926,38 +923,14 @@ void ipoib_mcast_restart_task(struct work_struct *work) netif_addr_unlock(dev); local_irq_restore(flags); - /* - * make sure the in-flight joins have finished before we attempt - * to leave - */ - list_for_each_entry_safe(mcast, tmcast, &remove_list, list) - if (test_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags)) - wait_for_completion(&mcast->done); - - /* - * We have to cancel outside of the spinlock, but we have to - * take the rtnl lock or else we race with the removal of - * entries from the remove list in mcast_dev_flush as part - * of ipoib_stop() which will call mcast_stop_thread with - * flush == 1 while holding the rtnl lock, and the - * flush_workqueue won't complete until this restart_mcast_task - * completes. So do like the carrier on task and attempt to - * take the rtnl lock, but if we can't before the ADMIN_UP flag - * goes away, then just return and know that the remove list will - * get flushed later by mcast_dev_flush. - */ - while (!rtnl_trylock()) { - if (!test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) - return; - else - msleep(20); - } + /* We have to cancel outside of the spinlock */ list_for_each_entry_safe(mcast, tmcast, &remove_list, list) { ipoib_mcast_leave(mcast->dev, mcast); ipoib_mcast_free(mcast); } - ipoib_mcast_start_thread(dev); - rtnl_unlock(); + + if (test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) + ipoib_mcast_start_thread(dev); } #ifdef CONFIG_INFINIBAND_IPOIB_DEBUG -- cgit v1.2.3 From e7a623d2df28a477efb6cf60471a4e2225e2e8e4 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 30 Jan 2015 15:39:20 -0800 Subject: Revert "IPoIB: fix MCAST_FLAG_BUSY usage" This reverts commit 016d9fb25cd9817ea9c723f4f7ecd978636b4489. The series of IPoIB bug fixes that went into 3.19-rc1 introduce regressions, and after trying to sort things out, we decided to revert to 3.18's IPoIB driver and get things right for 3.20. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 10 +- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 148 +++++++++---------------- 2 files changed, 57 insertions(+), 101 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index f4c1b20b23b2..d7562beb5423 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -98,15 +98,9 @@ enum { IPOIB_MCAST_FLAG_FOUND = 0, /* used in set_multicast_list */ IPOIB_MCAST_FLAG_SENDONLY = 1, - /* - * For IPOIB_MCAST_FLAG_BUSY - * When set, in flight join and mcast->mc is unreliable - * When clear and mcast->mc IS_ERR_OR_NULL, need to restart or - * haven't started yet - * When clear and mcast->mc is valid pointer, join was successful - */ - IPOIB_MCAST_FLAG_BUSY = 2, + IPOIB_MCAST_FLAG_BUSY = 2, /* joining or already joined */ IPOIB_MCAST_FLAG_ATTACHED = 3, + IPOIB_MCAST_JOIN_STARTED = 4, MAX_SEND_CQE = 16, IPOIB_CM_COPYBREAK = 256, diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index a52c9f3f7e42..9862c76a83f7 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -271,27 +271,16 @@ ipoib_mcast_sendonly_join_complete(int status, struct ipoib_mcast *mcast = multicast->context; struct net_device *dev = mcast->dev; - /* - * We have to take the mutex to force mcast_sendonly_join to - * return from ib_sa_multicast_join and set mcast->mc to a - * valid value. Otherwise we were racing with ourselves in - * that we might fail here, but get a valid return from - * ib_sa_multicast_join after we had cleared mcast->mc here, - * resulting in mis-matched joins and leaves and a deadlock - */ - mutex_lock(&mcast_mutex); - /* We trap for port events ourselves. */ if (status == -ENETRESET) - goto out; + return 0; if (!status) status = ipoib_mcast_join_finish(mcast, &multicast->rec); if (status) { if (mcast->logcount++ < 20) - ipoib_dbg_mcast(netdev_priv(dev), "sendonly multicast " - "join failed for %pI6, status %d\n", + ipoib_dbg_mcast(netdev_priv(dev), "multicast join failed for %pI6, status %d\n", mcast->mcmember.mgid.raw, status); /* Flush out any queued packets */ @@ -301,15 +290,11 @@ ipoib_mcast_sendonly_join_complete(int status, dev_kfree_skb_any(skb_dequeue(&mcast->pkt_queue)); } netif_tx_unlock_bh(dev); + + /* Clear the busy flag so we try again */ + status = test_and_clear_bit(IPOIB_MCAST_FLAG_BUSY, + &mcast->flags); } -out: - clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags); - if (status) - mcast->mc = NULL; - complete(&mcast->done); - if (status == -ENETRESET) - status = 0; - mutex_unlock(&mcast_mutex); return status; } @@ -327,14 +312,12 @@ static int ipoib_mcast_sendonly_join(struct ipoib_mcast *mcast) int ret = 0; if (!test_bit(IPOIB_FLAG_OPER_UP, &priv->flags)) { - ipoib_dbg_mcast(priv, "device shutting down, no sendonly " - "multicast joins\n"); + ipoib_dbg_mcast(priv, "device shutting down, no multicast joins\n"); return -ENODEV; } - if (test_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags)) { - ipoib_dbg_mcast(priv, "multicast entry busy, skipping " - "sendonly join\n"); + if (test_and_set_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags)) { + ipoib_dbg_mcast(priv, "multicast entry busy, skipping\n"); return -EBUSY; } @@ -342,9 +325,6 @@ static int ipoib_mcast_sendonly_join(struct ipoib_mcast *mcast) rec.port_gid = priv->local_gid; rec.pkey = cpu_to_be16(priv->pkey); - mutex_lock(&mcast_mutex); - init_completion(&mcast->done); - set_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags); mcast->mc = ib_sa_join_multicast(&ipoib_sa_client, priv->ca, priv->port, &rec, IB_SA_MCMEMBER_REC_MGID | @@ -357,14 +337,12 @@ static int ipoib_mcast_sendonly_join(struct ipoib_mcast *mcast) if (IS_ERR(mcast->mc)) { ret = PTR_ERR(mcast->mc); clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags); - complete(&mcast->done); - ipoib_warn(priv, "ib_sa_join_multicast for sendonly join " - "failed (ret = %d)\n", ret); + ipoib_warn(priv, "ib_sa_join_multicast failed (ret = %d)\n", + ret); } else { - ipoib_dbg_mcast(priv, "no multicast record for %pI6, starting " - "sendonly join\n", mcast->mcmember.mgid.raw); + ipoib_dbg_mcast(priv, "no multicast record for %pI6, starting join\n", + mcast->mcmember.mgid.raw); } - mutex_unlock(&mcast_mutex); return ret; } @@ -412,28 +390,22 @@ static int ipoib_mcast_join_complete(int status, ipoib_dbg_mcast(priv, "join completion for %pI6 (status %d)\n", mcast->mcmember.mgid.raw, status); - /* - * We have to take the mutex to force mcast_join to - * return from ib_sa_multicast_join and set mcast->mc to a - * valid value. Otherwise we were racing with ourselves in - * that we might fail here, but get a valid return from - * ib_sa_multicast_join after we had cleared mcast->mc here, - * resulting in mis-matched joins and leaves and a deadlock - */ - mutex_lock(&mcast_mutex); - /* We trap for port events ourselves. */ - if (status == -ENETRESET) + if (status == -ENETRESET) { + status = 0; goto out; + } if (!status) status = ipoib_mcast_join_finish(mcast, &multicast->rec); if (!status) { mcast->backoff = 1; + mutex_lock(&mcast_mutex); if (test_bit(IPOIB_MCAST_RUN, &priv->flags)) queue_delayed_work(ipoib_workqueue, &priv->mcast_task, 0); + mutex_unlock(&mcast_mutex); /* * Defer carrier on work to ipoib_workqueue to avoid a @@ -441,35 +413,37 @@ static int ipoib_mcast_join_complete(int status, */ if (mcast == priv->broadcast) queue_work(ipoib_workqueue, &priv->carrier_on_task); - } else { - if (mcast->logcount++ < 20) { - if (status == -ETIMEDOUT || status == -EAGAIN) { - ipoib_dbg_mcast(priv, "multicast join failed for %pI6, status %d\n", - mcast->mcmember.mgid.raw, status); - } else { - ipoib_warn(priv, "multicast join failed for %pI6, status %d\n", - mcast->mcmember.mgid.raw, status); - } - } - mcast->backoff *= 2; - if (mcast->backoff > IPOIB_MAX_BACKOFF_SECONDS) - mcast->backoff = IPOIB_MAX_BACKOFF_SECONDS; + status = 0; + goto out; } -out: + + if (mcast->logcount++ < 20) { + if (status == -ETIMEDOUT || status == -EAGAIN) { + ipoib_dbg_mcast(priv, "multicast join failed for %pI6, status %d\n", + mcast->mcmember.mgid.raw, status); + } else { + ipoib_warn(priv, "multicast join failed for %pI6, status %d\n", + mcast->mcmember.mgid.raw, status); + } + } + + mcast->backoff *= 2; + if (mcast->backoff > IPOIB_MAX_BACKOFF_SECONDS) + mcast->backoff = IPOIB_MAX_BACKOFF_SECONDS; + + /* Clear the busy flag so we try again */ + status = test_and_clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags); + + mutex_lock(&mcast_mutex); spin_lock_irq(&priv->lock); - clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags); - if (status) - mcast->mc = NULL; - complete(&mcast->done); - if (status == -ENETRESET) - status = 0; - if (status && test_bit(IPOIB_MCAST_RUN, &priv->flags)) + if (test_bit(IPOIB_MCAST_RUN, &priv->flags)) queue_delayed_work(ipoib_workqueue, &priv->mcast_task, mcast->backoff * HZ); spin_unlock_irq(&priv->lock); mutex_unlock(&mcast_mutex); - +out: + complete(&mcast->done); return status; } @@ -518,9 +492,10 @@ static void ipoib_mcast_join(struct net_device *dev, struct ipoib_mcast *mcast, rec.hop_limit = priv->broadcast->mcmember.hop_limit; } - mutex_lock(&mcast_mutex); - init_completion(&mcast->done); set_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags); + init_completion(&mcast->done); + set_bit(IPOIB_MCAST_JOIN_STARTED, &mcast->flags); + mcast->mc = ib_sa_join_multicast(&ipoib_sa_client, priv->ca, priv->port, &rec, comp_mask, GFP_KERNEL, ipoib_mcast_join_complete, mcast); @@ -534,12 +509,13 @@ static void ipoib_mcast_join(struct net_device *dev, struct ipoib_mcast *mcast, if (mcast->backoff > IPOIB_MAX_BACKOFF_SECONDS) mcast->backoff = IPOIB_MAX_BACKOFF_SECONDS; + mutex_lock(&mcast_mutex); if (test_bit(IPOIB_MCAST_RUN, &priv->flags)) queue_delayed_work(ipoib_workqueue, &priv->mcast_task, mcast->backoff * HZ); + mutex_unlock(&mcast_mutex); } - mutex_unlock(&mcast_mutex); } void ipoib_mcast_join_task(struct work_struct *work) @@ -592,8 +568,7 @@ void ipoib_mcast_join_task(struct work_struct *work) } if (!test_bit(IPOIB_MCAST_FLAG_ATTACHED, &priv->broadcast->flags)) { - if (IS_ERR_OR_NULL(priv->broadcast->mc) && - !test_bit(IPOIB_MCAST_FLAG_BUSY, &priv->broadcast->flags)) + if (!test_bit(IPOIB_MCAST_FLAG_BUSY, &priv->broadcast->flags)) ipoib_mcast_join(dev, priv->broadcast, 0); return; } @@ -601,33 +576,23 @@ void ipoib_mcast_join_task(struct work_struct *work) while (1) { struct ipoib_mcast *mcast = NULL; - /* - * Need the mutex so our flags are consistent, need the - * priv->lock so we don't race with list removals in either - * mcast_dev_flush or mcast_restart_task - */ - mutex_lock(&mcast_mutex); spin_lock_irq(&priv->lock); list_for_each_entry(mcast, &priv->multicast_list, list) { - if (IS_ERR_OR_NULL(mcast->mc) && - !test_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags) && - !test_bit(IPOIB_MCAST_FLAG_ATTACHED, &mcast->flags)) { + if (!test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags) + && !test_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags) + && !test_bit(IPOIB_MCAST_FLAG_ATTACHED, &mcast->flags)) { /* Found the next unjoined group */ break; } } spin_unlock_irq(&priv->lock); - mutex_unlock(&mcast_mutex); if (&mcast->list == &priv->multicast_list) { /* All done */ break; } - if (test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags)) - ipoib_mcast_sendonly_join(mcast); - else - ipoib_mcast_join(dev, mcast, 1); + ipoib_mcast_join(dev, mcast, 1); return; } @@ -673,9 +638,6 @@ static int ipoib_mcast_leave(struct net_device *dev, struct ipoib_mcast *mcast) int ret = 0; if (test_and_clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags)) - ipoib_warn(priv, "ipoib_mcast_leave on an in-flight join\n"); - - if (!IS_ERR_OR_NULL(mcast->mc)) ib_sa_free_multicast(mcast->mc); if (test_and_clear_bit(IPOIB_MCAST_FLAG_ATTACHED, &mcast->flags)) { @@ -728,8 +690,6 @@ void ipoib_mcast_send(struct net_device *dev, u8 *daddr, struct sk_buff *skb) memcpy(mcast->mcmember.mgid.raw, mgid, sizeof (union ib_gid)); __ipoib_mcast_add(dev, mcast); list_add_tail(&mcast->list, &priv->multicast_list); - if (!test_and_set_bit(IPOIB_MCAST_RUN, &priv->flags)) - queue_delayed_work(ipoib_workqueue, &priv->mcast_task, 0); } if (!mcast->ah) { @@ -743,6 +703,8 @@ void ipoib_mcast_send(struct net_device *dev, u8 *daddr, struct sk_buff *skb) if (test_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags)) ipoib_dbg_mcast(priv, "no address vector, " "but multicast join already started\n"); + else if (test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags)) + ipoib_mcast_sendonly_join(mcast); /* * If lookup completes between here and out:, don't @@ -804,7 +766,7 @@ void ipoib_mcast_dev_flush(struct net_device *dev) /* seperate between the wait to the leave*/ list_for_each_entry_safe(mcast, tmcast, &remove_list, list) - if (test_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags)) + if (test_bit(IPOIB_MCAST_JOIN_STARTED, &mcast->flags)) wait_for_completion(&mcast->done); list_for_each_entry_safe(mcast, tmcast, &remove_list, list) { -- cgit v1.2.3 From c6a7ec7a0f3b7817ac1710c41fdeb84a3c33a47a Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 30 Jan 2015 15:39:29 -0800 Subject: Revert "IPoIB: Make the carrier_on_task race aware" This reverts commit 67d7209e1f481cbaed37f9a224a328a3f83d0482. The series of IPoIB bug fixes that went into 3.19-rc1 introduce regressions, and after trying to sort things out, we decided to revert to 3.18's IPoIB driver and get things right for 3.20. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 9862c76a83f7..eee66d13e5b9 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -353,27 +353,18 @@ void ipoib_mcast_carrier_on_task(struct work_struct *work) carrier_on_task); struct ib_port_attr attr; + /* + * Take rtnl_lock to avoid racing with ipoib_stop() and + * turning the carrier back on while a device is being + * removed. + */ if (ib_query_port(priv->ca, priv->port, &attr) || attr.state != IB_PORT_ACTIVE) { ipoib_dbg(priv, "Keeping carrier off until IB port is active\n"); return; } - /* - * Take rtnl_lock to avoid racing with ipoib_stop() and - * turning the carrier back on while a device is being - * removed. However, ipoib_stop() will attempt to flush - * the workqueue while holding the rtnl lock, so loop - * on trylock until either we get the lock or we see - * FLAG_ADMIN_UP go away as that signals that we are bailing - * and can safely ignore the carrier on work - */ - while (!rtnl_trylock()) { - if (!test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) - return; - else - msleep(20); - } + rtnl_lock(); if (!ipoib_cm_admin_enabled(priv->dev)) dev_set_mtu(priv->dev, min(priv->mcast_mtu, priv->admin_mtu)); netif_carrier_on(priv->dev); -- cgit v1.2.3 From 4143a9515d355857aeaa151a63cf21dd061151d9 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 30 Jan 2015 15:39:36 -0800 Subject: Revert "IPoIB: Consolidate rtnl_lock tasks in workqueue" This reverts commit afe1de664ef3cb756e70938d99417dcbc6b1379a. The series of IPoIB bug fixes that went into 3.19-rc1 introduce regressions, and after trying to sort things out, we decided to revert to 3.18's IPoIB driver and get things right for 3.20. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index eee66d13e5b9..ffb83b5f7e80 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -190,6 +190,12 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast, spin_unlock_irq(&priv->lock); priv->tx_wr.wr.ud.remote_qkey = priv->qkey; set_qkey = 1; + + if (!ipoib_cm_admin_enabled(dev)) { + rtnl_lock(); + dev_set_mtu(dev, min(priv->mcast_mtu, priv->admin_mtu)); + rtnl_unlock(); + } } if (!test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags)) { @@ -365,8 +371,6 @@ void ipoib_mcast_carrier_on_task(struct work_struct *work) } rtnl_lock(); - if (!ipoib_cm_admin_enabled(priv->dev)) - dev_set_mtu(priv->dev, min(priv->mcast_mtu, priv->admin_mtu)); netif_carrier_on(priv->dev); rtnl_unlock(); } -- cgit v1.2.3 From 72b1405964c19b99ad9f75340249b16305cf31ab Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Thu, 29 Jan 2015 20:37:08 +0900 Subject: igbvf: Fix checksum error when using stacked vlan When a skb has multiple vlans and it is CHECKSUM_PARTIAL, igbvf_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use vlan_get_protocol() to get the proper network protocol. Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/igbvf/netdev.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 63c807c9b21c..edea13b0ee85 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -1907,7 +1907,8 @@ static void igbvf_watchdog_task(struct work_struct *work) static int igbvf_tso(struct igbvf_adapter *adapter, struct igbvf_ring *tx_ring, - struct sk_buff *skb, u32 tx_flags, u8 *hdr_len) + struct sk_buff *skb, u32 tx_flags, u8 *hdr_len, + __be16 protocol) { struct e1000_adv_tx_context_desc *context_desc; struct igbvf_buffer *buffer_info; @@ -1927,7 +1928,7 @@ static int igbvf_tso(struct igbvf_adapter *adapter, l4len = tcp_hdrlen(skb); *hdr_len += l4len; - if (skb->protocol == htons(ETH_P_IP)) { + if (protocol == htons(ETH_P_IP)) { struct iphdr *iph = ip_hdr(skb); iph->tot_len = 0; iph->check = 0; @@ -1958,7 +1959,7 @@ static int igbvf_tso(struct igbvf_adapter *adapter, /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT); - if (skb->protocol == htons(ETH_P_IP)) + if (protocol == htons(ETH_P_IP)) tu_cmd |= E1000_ADVTXD_TUCMD_IPV4; tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP; @@ -1984,7 +1985,8 @@ static int igbvf_tso(struct igbvf_adapter *adapter, static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter, struct igbvf_ring *tx_ring, - struct sk_buff *skb, u32 tx_flags) + struct sk_buff *skb, u32 tx_flags, + __be16 protocol) { struct e1000_adv_tx_context_desc *context_desc; unsigned int i; @@ -2011,7 +2013,7 @@ static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter, tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT); if (skb->ip_summed == CHECKSUM_PARTIAL) { - switch (skb->protocol) { + switch (protocol) { case htons(ETH_P_IP): tu_cmd |= E1000_ADVTXD_TUCMD_IPV4; if (ip_hdr(skb)->protocol == IPPROTO_TCP) @@ -2211,6 +2213,7 @@ static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb, u8 hdr_len = 0; int count = 0; int tso = 0; + __be16 protocol = vlan_get_protocol(skb); if (test_bit(__IGBVF_DOWN, &adapter->state)) { dev_kfree_skb_any(skb); @@ -2239,13 +2242,13 @@ static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb, tx_flags |= (vlan_tx_tag_get(skb) << IGBVF_TX_FLAGS_VLAN_SHIFT); } - if (skb->protocol == htons(ETH_P_IP)) + if (protocol == htons(ETH_P_IP)) tx_flags |= IGBVF_TX_FLAGS_IPV4; first = tx_ring->next_to_use; tso = skb_is_gso(skb) ? - igbvf_tso(adapter, tx_ring, skb, tx_flags, &hdr_len) : 0; + igbvf_tso(adapter, tx_ring, skb, tx_flags, &hdr_len, protocol) : 0; if (unlikely(tso < 0)) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; @@ -2253,7 +2256,7 @@ static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb, if (tso) tx_flags |= IGBVF_TX_FLAGS_TSO; - else if (igbvf_tx_csum(adapter, tx_ring, skb, tx_flags) && + else if (igbvf_tx_csum(adapter, tx_ring, skb, tx_flags, protocol) && (skb->ip_summed == CHECKSUM_PARTIAL)) tx_flags |= IGBVF_TX_FLAGS_CSUM; -- cgit v1.2.3 From 0213668f060ea966ee8f4e6334f0fd27b6a1c428 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Thu, 29 Jan 2015 20:37:09 +0900 Subject: ixgbe: Fix checksum error when using stacked vlan When a skb has multiple vlans and it is CHECKSUM_PARTIAL, ixgbe_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use vlan_get_protocol() to get the proper network protocol. Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 2ed2c7de2304..67b02bde179e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7227,11 +7227,11 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, if (!vhdr) goto out_drop; - protocol = vhdr->h_vlan_encapsulated_proto; tx_flags |= ntohs(vhdr->h_vlan_TCI) << IXGBE_TX_FLAGS_VLAN_SHIFT; tx_flags |= IXGBE_TX_FLAGS_SW_VLAN; } + protocol = vlan_get_protocol(skb); if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && adapter->ptp_clock && -- cgit v1.2.3 From 10e4fb333c9ad72491f80bed018f8007e17060d1 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Thu, 29 Jan 2015 20:37:10 +0900 Subject: ixgbevf: Fix checksum error when using stacked vlan When a skb has multiple vlans and it is CHECKSUM_PARTIAL, ixgbevf_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use first->protocol instead of skb->protocol to get the proper network protocol. Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 62a0d8e0f17d..38c7a0be8197 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -3099,7 +3099,7 @@ static int ixgbevf_tso(struct ixgbevf_ring *tx_ring, /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_TCP; - if (skb->protocol == htons(ETH_P_IP)) { + if (first->protocol == htons(ETH_P_IP)) { struct iphdr *iph = ip_hdr(skb); iph->tot_len = 0; iph->check = 0; @@ -3156,7 +3156,7 @@ static void ixgbevf_tx_csum(struct ixgbevf_ring *tx_ring, if (skb->ip_summed == CHECKSUM_PARTIAL) { u8 l4_hdr = 0; - switch (skb->protocol) { + switch (first->protocol) { case htons(ETH_P_IP): vlan_macip_lens |= skb_network_header_len(skb); type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4; -- cgit v1.2.3 From ecf6ba83d76e0c78e89401750dc527008e14faa2 Mon Sep 17 00:00:00 2001 From: Iyappan Subramanian Date: Thu, 29 Jan 2015 14:38:23 -0800 Subject: drivers: net: xgene: fix: Out of order descriptor bytes read This patch fixes the following kernel crash, WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_input.c:3079 tcp_clean_rtx_queue+0x658/0x80c() Call trace: [] dump_backtrace+0x0/0x184 [] show_stack+0x10/0x1c [] dump_stack+0x74/0x98 [] warn_slowpath_common+0x88/0xb0 [] warn_slowpath_null+0x14/0x20 [] tcp_clean_rtx_queue+0x654/0x80c [] tcp_ack+0x454/0x688 [] tcp_rcv_established+0x4a4/0x62c [] tcp_v4_do_rcv+0x16c/0x350 [] tcp_v4_rcv+0x8e8/0x904 [] ip_local_deliver_finish+0x100/0x26c [] ip_local_deliver+0xac/0xc4 [] ip_rcv_finish+0xe8/0x328 [] ip_rcv+0x24c/0x38c [] __netif_receive_skb_core+0x29c/0x7c8 [] __netif_receive_skb+0x28/0x7c [] netif_receive_skb_internal+0x5c/0xe0 [] napi_gro_receive+0xb4/0x110 [] xgene_enet_process_ring+0x144/0x338 [] xgene_enet_napi+0x1c/0x50 [] net_rx_action+0x154/0x228 [] __do_softirq+0x110/0x28c [] irq_exit+0x8c/0xc0 [] handle_IRQ+0x44/0xa8 [] gic_handle_irq+0x38/0x7c [...] Software writes poison data into the descriptor bytes[15:8] and upon receiving the interrupt, if those bytes are overwritten by the hardware with the valid data, software also reads bytes[7:0] and executes receive/tx completion logic. If the CPU executes the above two reads in out of order fashion, then the bytes[7:0] will have older data and causing the kernel panic. We have to force the order of the reads and thus this patch introduces read memory barrier between these reads. Signed-off-by: Iyappan Subramanian Signed-off-by: Keyur Chudgar Signed-off-by: David S. Miller --- drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c index 83a50280bb70..793f3b73eeff 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c @@ -369,6 +369,8 @@ static int xgene_enet_process_ring(struct xgene_enet_desc_ring *ring, if (unlikely(xgene_enet_is_desc_slot_empty(raw_desc))) break; + /* read fpqnum field after dataaddr field */ + dma_rmb(); if (is_rx_desc(raw_desc)) ret = xgene_enet_rx_frame(ring, raw_desc); else -- cgit v1.2.3 From d953ca4ddf71aa91a4596b2ff7ff1598f6ad4708 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Thu, 29 Jan 2015 12:34:49 -0800 Subject: hyperv: Fix the error processing in netvsc_send() The existing code frees the skb in EAGAIN case, in which the skb will be retried from upper layer and used again. Also, the existing code doesn't free send buffer slot in error case, because there is no completion message for unsent packets. This patch fixes these problems. (Please also include this patch for stable trees. Thanks!) Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 9f49c0129a78..7cd4eb38abfa 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -716,7 +716,7 @@ int netvsc_send(struct hv_device *device, u64 req_id; unsigned int section_index = NETVSC_INVALID_INDEX; u32 msg_size = 0; - struct sk_buff *skb; + struct sk_buff *skb = NULL; u16 q_idx = packet->q_idx; @@ -743,8 +743,6 @@ int netvsc_send(struct hv_device *device, packet); skb = (struct sk_buff *) (unsigned long)packet->send_completion_tid; - if (skb) - dev_kfree_skb_any(skb); packet->page_buf_cnt = 0; } } @@ -810,6 +808,13 @@ int netvsc_send(struct hv_device *device, packet, ret); } + if (ret != 0) { + if (section_index != NETVSC_INVALID_INDEX) + netvsc_free_send_slot(net_device, section_index); + } else if (skb) { + dev_kfree_skb_any(skb); + } + return ret; } -- cgit v1.2.3 From 47c1ffb2b6b630894e9a16442611c056ab21c057 Mon Sep 17 00:00:00 2001 From: Rainer Koenig Date: Tue, 27 Jan 2015 15:15:11 -0800 Subject: Input: elantech - add more Fujtisu notebooks to force crc_enabled Add two more Fujitsu LIFEBOOK models that also ship with the Elantech touchpad and don't work with crc_disabled to the quirk list. Signed-off-by: Rainer Koenig Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 77ecf6d32237..6e22682c8255 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1097,6 +1097,8 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse, * Asus UX31 0x361f00 20, 15, 0e clickpad * Asus UX32VD 0x361f02 00, 15, 0e clickpad * Avatar AVIU-145A2 0x361f00 ? clickpad + * Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons + * Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons * Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**) * Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons * Lenovo L430 0x350f02 b9, 15, 0c 2 hw buttons (*) @@ -1475,6 +1477,20 @@ static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = { DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"), }, }, + { + /* Fujitsu LIFEBOOK E554 does not work with crc_enabled == 0 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E554"), + }, + }, + { + /* Fujitsu LIFEBOOK E544 does not work with crc_enabled == 0 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E544"), + }, + }, #endif { } }; -- cgit v1.2.3 From b1b02fe97f75b12ab34b2303bfd4e3526d903a58 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 2 Feb 2015 10:44:29 +1100 Subject: md/raid5: fix another livelock caused by non-aligned writes. If a non-page-aligned write is destined for a device which is missing/faulty, we can deadlock. As the target device is missing, a read-modify-write cycle is not possible. As the write is not for a full-page, a recontruct-write cycle is not possible. This should be handled by logic in fetch_block() which notices there is a non-R5_OVERWRITE write to a missing device, and so loads all blocks. However since commit 67f455486d2ea2, that code requires STRIPE_PREREAD_ACTIVE before it will active, and those circumstances never set STRIPE_PREREAD_ACTIVE. So: in handle_stripe_dirtying, if neither rmw or rcw was possible, set STRIPE_DELAYED, which will cause STRIPE_PREREAD_ACTIVE be set after a suitable delay. Fixes: 67f455486d2ea20b2d94d6adf5b9b783d079e321 Cc: stable@vger.kernel.org (v3.16+) Reported-by: Mikulas Patocka Tested-by: Heinz Mauelshagen Signed-off-by: NeilBrown --- drivers/md/raid5.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index c1b0d52bfcb0..b98765f6f77f 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3195,6 +3195,11 @@ static void handle_stripe_dirtying(struct r5conf *conf, (unsigned long long)sh->sector, rcw, qread, test_bit(STRIPE_DELAYED, &sh->state)); } + + if (rcw > disks && rmw > disks && + !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) + set_bit(STRIPE_DELAYED, &sh->state); + /* now if nothing is locked, and if we have enough data, * we can start a write request */ -- cgit v1.2.3 From d95901433436aeb921eac58bfd8a2aa77f110384 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 2 Feb 2015 17:08:03 +1100 Subject: md/bitmap: fix a might_sleep() warning. commit 8eb23b9f35aae413140d3fda766a98092c21e9b0 sched: Debug nested sleeps causes false-positive warnings in RAID5 code. This annotation removes them and adds a comment explaining why there is no real problem. Reported-by: Fengguang Wu Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index da3604e73e8a..1695ee5f3ffc 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -72,6 +72,19 @@ __acquires(bitmap->lock) /* this page has not been allocated yet */ spin_unlock_irq(&bitmap->lock); + /* It is possible that this is being called inside a + * prepare_to_wait/finish_wait loop from raid5c:make_request(). + * In general it is not permitted to sleep in that context as it + * can cause the loop to spin freely. + * That doesn't apply here as we can only reach this point + * once with any loop. + * When this function completes, either bp[page].map or + * bp[page].hijacked. In either case, this function will + * abort before getting to this point again. So there is + * no risk of a free-spin, and so it is safe to assert + * that sleeping here is allowed. + */ + sched_annotate_sleep(); mappage = kzalloc(PAGE_SIZE, GFP_NOIO); spin_lock_irq(&bitmap->lock); -- cgit v1.2.3 From 8b58f261113c442717b9d205ab187e51c3823597 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Thu, 29 Jan 2015 10:32:25 +0200 Subject: drm/amdkfd: Fix bug in accounting of queues Signed-off-by: Oded Gabbay Reviewed-by: Jammy Zhou Reviewed-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index 0d8694f015c1..0fd592799d58 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -822,7 +822,7 @@ static void destroy_kernel_queue_cpsch(struct device_queue_manager *dqm, * Unconditionally decrement this counter, regardless of the queue's * type. */ - dqm->total_queue_count++; + dqm->total_queue_count--; pr_debug("Total of %d queues are accountable so far\n", dqm->total_queue_count); mutex_unlock(&dqm->lock); -- cgit v1.2.3 From ca400b2a1a6c768416725e5f873829e23300d3eb Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Thu, 29 Jan 2015 10:33:34 +0200 Subject: drm/amdkfd: max num of queues can't be 0 Signed-off-by: Oded Gabbay Reviewed-by: Jammy Zhou Reviewed-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_module.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_module.c b/drivers/gpu/drm/amd/amdkfd/kfd_module.c index a8be6df85347..1c385c23dd0b 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_module.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_module.c @@ -95,10 +95,10 @@ static int __init kfd_module_init(void) } /* Verify module parameters */ - if ((max_num_of_queues_per_device < 0) || + if ((max_num_of_queues_per_device < 1) || (max_num_of_queues_per_device > KFD_MAX_NUM_OF_QUEUES_PER_DEVICE)) { - pr_err("kfd: max_num_of_queues_per_device must be between 0 to KFD_MAX_NUM_OF_QUEUES_PER_DEVICE\n"); + pr_err("kfd: max_num_of_queues_per_device must be between 1 to KFD_MAX_NUM_OF_QUEUES_PER_DEVICE\n"); return -1; } -- cgit v1.2.3 From b9dce23ddc949faa8ba138f8a0811e177c991bf1 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Tue, 20 Jan 2015 14:57:19 +0200 Subject: drm/amdkfd: Don't create BUG due to incorrect user parameter This patch changes a BUG_ON() statement to pr_debug, in case the user tries to update a non-existing queue. Signed-off-by: Oded Gabbay Reviewed-by: Ben Goz Reviewed-by: Jammy Zhou Reviewed-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c index f37cf5efe642..2fda1927bff7 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c @@ -315,7 +315,11 @@ int pqm_update_queue(struct process_queue_manager *pqm, unsigned int qid, BUG_ON(!pqm); pqn = get_queue_by_qid(pqm, qid); - BUG_ON(!pqn); + if (!pqn) { + pr_debug("amdkfd: No queue %d exists for update operation\n", + qid); + return -EFAULT; + } pqn->q->properties.queue_address = p->queue_address; pqn->q->properties.queue_size = p->queue_size; -- cgit v1.2.3 From 28072ad50ca7328bd99f9dba94ac27c723da0053 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 28 Jan 2015 03:46:53 -0600 Subject: scsi: fix device handler detach oops This fixes a regression caused by commit 1d5203 ("scsi: handle more device handler setup/teardown in common code"). The bug is that the alua detach() callout will try to access the sddev->scsi_dh_data, but we have already set it to NULL. This patch moves the clearing of that field to after detach() is called. Signed-off-by: Mike Christie Signed-off-by: Christoph Hellwig --- drivers/scsi/device_handler/scsi_dh.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c index 1dba62c5cf6a..1efebc9eedfb 100644 --- a/drivers/scsi/device_handler/scsi_dh.c +++ b/drivers/scsi/device_handler/scsi_dh.c @@ -136,11 +136,12 @@ static void __detach_handler (struct kref *kref) struct scsi_device_handler *scsi_dh = scsi_dh_data->scsi_dh; struct scsi_device *sdev = scsi_dh_data->sdev; + scsi_dh->detach(sdev); + spin_lock_irq(sdev->request_queue->queue_lock); sdev->scsi_dh_data = NULL; spin_unlock_irq(sdev->request_queue->queue_lock); - scsi_dh->detach(sdev); sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", scsi_dh->name); module_put(scsi_dh->module); } -- cgit v1.2.3 From 3a9794d32984b67a6d8992226918618f0e51e5d5 Mon Sep 17 00:00:00 2001 From: Brian King Date: Thu, 29 Jan 2015 15:54:40 -0600 Subject: sd: Fix max transfer length for 4k disks The following patch fixes an issue observed with 4k sector disks where the max_hw_sectors attribute was getting set too large in sd_revalidate_disk. Since sdkp->max_xfer_blocks is in units of SCSI logical blocks and queue_max_hw_sectors is in units of 512 byte blocks, on a 4k sector disk, every time we went through sd_revalidate_disk, we were taking the current value of queue_max_hw_sectors and increasing it by a factor of 8. Fix this by only shifting sdkp->max_xfer_blocks. Cc: stable@vger.kernel.org Signed-off-by: Brian King Reviewed-by: Paolo Bonzini Reviewed-by: Martin K. Petersen Signed-off-by: Christoph Hellwig --- drivers/scsi/sd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 399516925d80..05ea0d49a3a3 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2800,9 +2800,11 @@ static int sd_revalidate_disk(struct gendisk *disk) */ sd_set_flush_flag(sdkp); - max_xfer = min_not_zero(queue_max_hw_sectors(sdkp->disk->queue), - sdkp->max_xfer_blocks); + max_xfer = sdkp->max_xfer_blocks; max_xfer <<= ilog2(sdp->sector_size) - 9; + + max_xfer = min_not_zero(queue_max_hw_sectors(sdkp->disk->queue), + max_xfer); blk_queue_max_hw_sectors(sdkp->disk->queue, max_xfer); set_capacity(disk, sdkp->capacity); sd_config_write_same(sdkp); -- cgit v1.2.3 From 72edd83cc9e5819ed1ee771519143d7594e059f0 Mon Sep 17 00:00:00 2001 From: Christian König Date: Thu, 29 Jan 2015 16:01:03 +0100 Subject: drm/radeon: fix PLLs on RS880 and older v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is a workaround for RS880 and older chips which seem to have an additional limit on the minimum PLL input frequency. v2: fix signed/unsigned warning bugs: https://bugzilla.kernel.org/show_bug.cgi?id=91861 https://bugzilla.kernel.org/show_bug.cgi?id=83461 Signed-off-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_display.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 102116902a07..913fafa597ad 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -960,6 +960,9 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV && pll->flags & RADEON_PLL_USE_REF_DIV) ref_div_max = pll->reference_div; + else if (pll->flags & RADEON_PLL_PREFER_MINM_OVER_MAXP) + /* fix for problems on RS880 */ + ref_div_max = min(pll->max_ref_div, 7u); else ref_div_max = pll->max_ref_div; -- cgit v1.2.3 From 544143f9e01a60a93eb00ab4bfcb9bf4702a2a7d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 Jan 2015 14:36:26 -0500 Subject: drm/radeon: don't init gpuvm if accel is disabled (v3) If acceleration is disabled, it does not make sense to init gpuvm since nothing will use it. Moreover, if radeon_vm_init() gets called it uses accel to try and clear the pde tables, etc. which results in a bug. v2: handle vm_fini as well v3: handle bo_open/close as well Bug: https://bugs.freedesktop.org/show_bug.cgi?id=88786 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_gem.c | 6 ++++-- drivers/gpu/drm/radeon/radeon_kms.c | 16 ++++++++-------- 2 files changed, 12 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index d0b4f7d1140d..ac3c1310b953 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -146,7 +146,8 @@ int radeon_gem_object_open(struct drm_gem_object *obj, struct drm_file *file_pri struct radeon_bo_va *bo_va; int r; - if (rdev->family < CHIP_CAYMAN) { + if ((rdev->family < CHIP_CAYMAN) || + (!rdev->accel_working)) { return 0; } @@ -176,7 +177,8 @@ void radeon_gem_object_close(struct drm_gem_object *obj, struct radeon_bo_va *bo_va; int r; - if (rdev->family < CHIP_CAYMAN) { + if ((rdev->family < CHIP_CAYMAN) || + (!rdev->accel_working)) { return; } diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 3cf9c1fa6475..686411e4e4f6 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -605,14 +605,14 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv) return -ENOMEM; } - vm = &fpriv->vm; - r = radeon_vm_init(rdev, vm); - if (r) { - kfree(fpriv); - return r; - } - if (rdev->accel_working) { + vm = &fpriv->vm; + r = radeon_vm_init(rdev, vm); + if (r) { + kfree(fpriv); + return r; + } + r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false); if (r) { radeon_vm_fini(rdev, vm); @@ -668,9 +668,9 @@ void radeon_driver_postclose_kms(struct drm_device *dev, radeon_vm_bo_rmv(rdev, vm->ib_bo_va); radeon_bo_unreserve(rdev->ring_tmp_bo.bo); } + radeon_vm_fini(rdev, vm); } - radeon_vm_fini(rdev, vm); kfree(fpriv); file_priv->driver_priv = NULL; } -- cgit v1.2.3 From a124d068bf5be6be2ff4b9fab77b1b7509107e68 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 30 Jan 2015 09:52:24 -0500 Subject: drm/radeon: properly set vm fragment size for TN/RL Should be the same as cayman. We don't use VM by default on NI parts so this isn't critical. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_vm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c index 06d2246d07f1..2a5a4a9e772d 100644 --- a/drivers/gpu/drm/radeon/radeon_vm.c +++ b/drivers/gpu/drm/radeon/radeon_vm.c @@ -743,9 +743,11 @@ static void radeon_vm_frag_ptes(struct radeon_device *rdev, */ /* NI is optimized for 256KB fragments, SI and newer for 64KB */ - uint64_t frag_flags = rdev->family == CHIP_CAYMAN ? + uint64_t frag_flags = ((rdev->family == CHIP_CAYMAN) || + (rdev->family == CHIP_ARUBA)) ? R600_PTE_FRAG_256KB : R600_PTE_FRAG_64KB; - uint64_t frag_align = rdev->family == CHIP_CAYMAN ? 0x200 : 0x80; + uint64_t frag_align = ((rdev->family == CHIP_CAYMAN) || + (rdev->family == CHIP_ARUBA)) ? 0x200 : 0x80; uint64_t frag_start = ALIGN(pe_start, frag_align); uint64_t frag_end = pe_end & ~(frag_align - 1); -- cgit v1.2.3 From 3f5e1b4f58b7b6480cccff4bf965436102db4346 Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Fri, 30 Jan 2015 00:38:43 -0500 Subject: drm/radeon: fix the crash in benchmark functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit radeon_copy_dma and radeon_copy_blit must be called with a valid reservation object. Otherwise a crash will be provoked. We borrow the object from destination BO. bug: https://bugs.freedesktop.org/show_bug.cgi?id=88464 Cc: stable@vger.kernel.org Reviewed-by: Christian König Signed-off-by: Ilija Hadzic Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_benchmark.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c index 9e7f23dd14bd..87d5fb21cb61 100644 --- a/drivers/gpu/drm/radeon/radeon_benchmark.c +++ b/drivers/gpu/drm/radeon/radeon_benchmark.c @@ -34,7 +34,8 @@ static int radeon_benchmark_do_move(struct radeon_device *rdev, unsigned size, uint64_t saddr, uint64_t daddr, - int flag, int n) + int flag, int n, + struct reservation_object *resv) { unsigned long start_jiffies; unsigned long end_jiffies; @@ -47,12 +48,12 @@ static int radeon_benchmark_do_move(struct radeon_device *rdev, unsigned size, case RADEON_BENCHMARK_COPY_DMA: fence = radeon_copy_dma(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, - NULL); + resv); break; case RADEON_BENCHMARK_COPY_BLIT: fence = radeon_copy_blit(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, - NULL); + resv); break; default: DRM_ERROR("Unknown copy method\n"); @@ -120,7 +121,8 @@ static void radeon_benchmark_move(struct radeon_device *rdev, unsigned size, if (rdev->asic->copy.dma) { time = radeon_benchmark_do_move(rdev, size, saddr, daddr, - RADEON_BENCHMARK_COPY_DMA, n); + RADEON_BENCHMARK_COPY_DMA, n, + dobj->tbo.resv); if (time < 0) goto out_cleanup; if (time > 0) @@ -130,7 +132,8 @@ static void radeon_benchmark_move(struct radeon_device *rdev, unsigned size, if (rdev->asic->copy.blit) { time = radeon_benchmark_do_move(rdev, size, saddr, daddr, - RADEON_BENCHMARK_COPY_BLIT, n); + RADEON_BENCHMARK_COPY_BLIT, n, + dobj->tbo.resv); if (time < 0) goto out_cleanup; if (time > 0) -- cgit v1.2.3 From 92b712b739811e4aa7c0e1af339d0098989ea024 Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Fri, 30 Jan 2015 00:38:44 -0500 Subject: drm/radeon: fix the crash in test functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit radeon_copy_dma and radeon_copy_blit must be called with a valid reservation object. Otherwise a crash will be provoked. We borrow the object from vram BO. bug: https://bugs.freedesktop.org/show_bug.cgi?id=88464 Cc: stable@vger.kernel.org Reviewed-by: Christian König Signed-off-by: Ilija Hadzic Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_test.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index 07b506b41008..791818165c76 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -119,11 +119,11 @@ static void radeon_do_test_moves(struct radeon_device *rdev, int flag) if (ring == R600_RING_TYPE_DMA_INDEX) fence = radeon_copy_dma(rdev, gtt_addr, vram_addr, size / RADEON_GPU_PAGE_SIZE, - NULL); + vram_obj->tbo.resv); else fence = radeon_copy_blit(rdev, gtt_addr, vram_addr, size / RADEON_GPU_PAGE_SIZE, - NULL); + vram_obj->tbo.resv); if (IS_ERR(fence)) { DRM_ERROR("Failed GTT->VRAM copy %d\n", i); r = PTR_ERR(fence); @@ -170,11 +170,11 @@ static void radeon_do_test_moves(struct radeon_device *rdev, int flag) if (ring == R600_RING_TYPE_DMA_INDEX) fence = radeon_copy_dma(rdev, vram_addr, gtt_addr, size / RADEON_GPU_PAGE_SIZE, - NULL); + vram_obj->tbo.resv); else fence = radeon_copy_blit(rdev, vram_addr, gtt_addr, size / RADEON_GPU_PAGE_SIZE, - NULL); + vram_obj->tbo.resv); if (IS_ERR(fence)) { DRM_ERROR("Failed VRAM->GTT copy %d\n", i); r = PTR_ERR(fence); -- cgit v1.2.3 From 61132bf7fbe3a802df1f68ad08e8ca10d6b30ddc Mon Sep 17 00:00:00 2001 From: Marcelo Leitner Date: Fri, 30 Jan 2015 09:56:01 -0200 Subject: qlge: Fix qlge_update_hw_vlan_features to handle if interface is down Currently qlge_update_hw_vlan_features() will always first put the interface down, then update features and then bring it up again. But it is possible to hit this code while the adapter is down and this causes a non-paired call to napi_disable(), which will get stuck. This patch fixes it by skipping these down/up actions if the interface is already down. Fixes: a45adbe8d352 ("qlge: Enhance nested VLAN (Q-in-Q) handling.") Cc: Harish Patil Signed-off-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlge/qlge_main.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index 6c904a6cad2a..ef5aed3b1225 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -2351,23 +2351,29 @@ static int qlge_update_hw_vlan_features(struct net_device *ndev, { struct ql_adapter *qdev = netdev_priv(ndev); int status = 0; + bool need_restart = netif_running(ndev); - status = ql_adapter_down(qdev); - if (status) { - netif_err(qdev, link, qdev->ndev, - "Failed to bring down the adapter\n"); - return status; + if (need_restart) { + status = ql_adapter_down(qdev); + if (status) { + netif_err(qdev, link, qdev->ndev, + "Failed to bring down the adapter\n"); + return status; + } } /* update the features with resent change */ ndev->features = features; - status = ql_adapter_up(qdev); - if (status) { - netif_err(qdev, link, qdev->ndev, - "Failed to bring up the adapter\n"); - return status; + if (need_restart) { + status = ql_adapter_up(qdev); + if (status) { + netif_err(qdev, link, qdev->ndev, + "Failed to bring up the adapter\n"); + return status; + } } + return status; } -- cgit v1.2.3 From 44ba582beac4ff8e05a15e38548ebf3deb509547 Mon Sep 17 00:00:00 2001 From: David L Stevens Date: Fri, 30 Jan 2015 12:29:45 -0500 Subject: sunvnet: set queue mapping when doing packet copies This patch fixes a bug where vnet_skb_shape() didn't set the already-selected queue mapping when a packet copy was required. This results in using the wrong queue index for stops/starts, hung tx queues and watchdog timeouts under heavy load. Signed-off-by: David L Stevens Acked-by: Sowmini Varadhan Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sunvnet.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index d2835bf7b4fb..3699b98d5b2c 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -1119,6 +1119,7 @@ static inline struct sk_buff *vnet_skb_shape(struct sk_buff *skb, int ncookies) skb_shinfo(nskb)->gso_size = skb_shinfo(skb)->gso_size; skb_shinfo(nskb)->gso_type = skb_shinfo(skb)->gso_type; } + nskb->queue_mapping = skb->queue_mapping; dev_kfree_skb(skb); skb = nskb; } -- cgit v1.2.3 From c101cff9010083a8796353a75673fd100b077b79 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 1 Feb 2015 23:54:25 +0300 Subject: isdn: off by one in connect_res() The bug here is that we use "Reject" as the index into the cau_t[] array in the else path. Since the cau_t[] has 9 elements if Reject == 9 then we are reading beyond the end of the array. My understanding of the code is that it's saying that if Reject is 1 or too high then that's invalid and we should hang up. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/isdn/hardware/eicon/message.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c index 0b380603a578..d7c286656a25 100644 --- a/drivers/isdn/hardware/eicon/message.c +++ b/drivers/isdn/hardware/eicon/message.c @@ -1474,7 +1474,7 @@ static byte connect_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a, add_ai(plci, &parms[5]); sig_req(plci, REJECT, 0); } - else if (Reject == 1 || Reject > 9) + else if (Reject == 1 || Reject >= 9) { add_ai(plci, &parms[5]); sig_req(plci, HANGUP, 0); -- cgit v1.2.3 From 5a2e87b16875f9b83b7e9494cf1fce8e17dc764a Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 2 Feb 2015 15:18:42 +0200 Subject: net/mlx4_core: Fix kernel Oops (mem corruption) when working with more than 80 VFs Commit de966c592802 (net/mlx4_core: Support more than 64 VFs) was meant to allow up to 126 VFs. However, due to leaving MLX4_MFUNC_MAX too low, using more than 80 VFs resulted in memory corruptions (and Oopses) when more than 80 VFs were requested. In addition, the number of slaves was left too high. This commit fixes these issues. Fixes: de966c592802 ("net/mlx4_core: Support more than 64 VFs") Signed-off-by: Jack Morgenstein Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/mlx4.h | 3 ++- include/linux/mlx4/device.h | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index bdd4eea2247c..210691c89b6c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -235,7 +235,8 @@ do { \ extern int mlx4_log_num_mgm_entry_size; extern int log_mtts_per_seg; -#define MLX4_MAX_NUM_SLAVES (MLX4_MAX_NUM_PF + MLX4_MAX_NUM_VF) +#define MLX4_MAX_NUM_SLAVES (min(MLX4_MAX_NUM_PF + MLX4_MAX_NUM_VF, \ + MLX4_MFUNC_MAX)) #define ALL_SLAVES 0xff struct mlx4_bitmap { diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 25c791e295fd..5f3a9aa7225d 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -97,7 +97,7 @@ enum { MLX4_MAX_NUM_PF = 16, MLX4_MAX_NUM_VF = 126, MLX4_MAX_NUM_VF_P_PORT = 64, - MLX4_MFUNC_MAX = 80, + MLX4_MFUNC_MAX = 128, MLX4_MAX_EQ_NUM = 1024, MLX4_MFUNC_EQ_NUM = 4, MLX4_MFUNC_MAX_EQES = 8, -- cgit v1.2.3 From 42b5212fee4f57907e9415b18fe19c13e65574bc Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Mon, 2 Feb 2015 16:57:51 +0000 Subject: xen-netback: stop the guest rx thread after a fatal error After commit e9d8b2c2968499c1f96563e6522c56958d5a1d0d (xen-netback: disable rogue vif in kthread context), a fatal (protocol) error would leave the guest Rx thread spinning, wasting CPU time. Commit ecf08d2dbb96d5a4b4bcc53a39e8d29cc8fef02e (xen-netback: reintroduce guest Rx stall detection) made this even worse by removing a cond_resched() from this path. Since a fatal error is non-recoverable, just allow the guest Rx thread to exit. This requires taking additional refs to the task so the thread exiting early is handled safely. Signed-off-by: David Vrabel Reported-by: Julien Grall Tested-by: Julien Grall Acked-by: Wei Liu Signed-off-by: David S. Miller --- drivers/net/xen-netback/interface.c | 2 ++ drivers/net/xen-netback/netback.c | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index 9259a732e8a4..037f74f0fcf6 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -578,6 +578,7 @@ int xenvif_connect(struct xenvif_queue *queue, unsigned long tx_ring_ref, goto err_rx_unbind; } queue->task = task; + get_task_struct(task); task = kthread_create(xenvif_dealloc_kthread, (void *)queue, "%s-dealloc", queue->name); @@ -634,6 +635,7 @@ void xenvif_disconnect(struct xenvif *vif) if (queue->task) { kthread_stop(queue->task); + put_task_struct(queue->task); queue->task = NULL; } diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 908e65e9b821..c8ce701a7efb 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -2109,8 +2109,7 @@ int xenvif_kthread_guest_rx(void *data) */ if (unlikely(vif->disabled && queue->id == 0)) { xenvif_carrier_off(vif); - xenvif_rx_queue_purge(queue); - continue; + break; } if (!skb_queue_empty(&queue->rx_queue)) -- cgit v1.2.3 From a02bb401f8ae264be782ee57d98bdd99f14c8022 Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Tue, 3 Feb 2015 10:25:53 +0800 Subject: spi: imx: use pio mode for i.mx6dl For TKT238285 hardware issue which may cause txfifo store data twice can only be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl. Fixes: f62caccd12c17e4 (spi: spi-imx: add DMA support) Signed-off-by: Robin Gong Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-imx.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 961b97d43b43..fe1b7699fab6 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -823,6 +823,10 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, struct dma_slave_config slave_config = {}; int ret; + /* use pio mode for i.mx6dl chip TKT238285 */ + if (of_machine_is_compatible("fsl,imx6dl")) + return 0; + /* Prepare for TX DMA: */ master->dma_tx = dma_request_slave_channel(dev, "tx"); if (!master->dma_tx) { -- cgit v1.2.3 From 3df2da96874402722d760e5d4eb2968737e5bb01 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 3 Feb 2015 14:29:43 +0100 Subject: Revert "ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA" Revert commit 6c17ee44d524 (ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA), as it introduced registration and probe ordering problems between devices on the LPSS that may lead to full hard system hang on boot in some cases. --- drivers/acpi/acpi_lpss.c | 35 +++++++---------------------------- 1 file changed, 7 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 4f3febf8a589..e75737fd7eef 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -1,7 +1,7 @@ /* * ACPI support for Intel Lynxpoint LPSS. * - * Copyright (C) 2013, 2014, Intel Corporation + * Copyright (C) 2013, Intel Corporation * Authors: Mika Westerberg * Rafael J. Wysocki * @@ -60,8 +60,6 @@ ACPI_MODULE_NAME("acpi_lpss"); #define LPSS_CLK_DIVIDER BIT(2) #define LPSS_LTR BIT(3) #define LPSS_SAVE_CTX BIT(4) -#define LPSS_DEV_PROXY BIT(5) -#define LPSS_PROXY_REQ BIT(6) struct lpss_private_data; @@ -72,10 +70,8 @@ struct lpss_device_desc { void (*setup)(struct lpss_private_data *pdata); }; -static struct device *proxy_device; - static struct lpss_device_desc lpss_dma_desc = { - .flags = LPSS_CLK | LPSS_PROXY_REQ, + .flags = LPSS_CLK, }; struct lpss_private_data { @@ -150,24 +146,22 @@ static struct lpss_device_desc byt_pwm_dev_desc = { }; static struct lpss_device_desc byt_uart_dev_desc = { - .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX | - LPSS_DEV_PROXY, + .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX, .prv_offset = 0x800, .setup = lpss_uart_setup, }; static struct lpss_device_desc byt_spi_dev_desc = { - .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX | - LPSS_DEV_PROXY, + .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX, .prv_offset = 0x400, }; static struct lpss_device_desc byt_sdio_dev_desc = { - .flags = LPSS_CLK | LPSS_DEV_PROXY, + .flags = LPSS_CLK, }; static struct lpss_device_desc byt_i2c_dev_desc = { - .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_DEV_PROXY, + .flags = LPSS_CLK | LPSS_SAVE_CTX, .prv_offset = 0x800, .setup = byt_i2c_setup, }; @@ -374,8 +368,6 @@ static int acpi_lpss_create_device(struct acpi_device *adev, adev->driver_data = pdata; pdev = acpi_create_platform_device(adev); if (!IS_ERR_OR_NULL(pdev)) { - if (!proxy_device && dev_desc->flags & LPSS_DEV_PROXY) - proxy_device = &pdev->dev; return 1; } @@ -600,14 +592,7 @@ static int acpi_lpss_runtime_suspend(struct device *dev) if (pdata->dev_desc->flags & LPSS_SAVE_CTX) acpi_lpss_save_ctx(dev, pdata); - ret = acpi_dev_runtime_suspend(dev); - if (ret) - return ret; - - if (pdata->dev_desc->flags & LPSS_PROXY_REQ && proxy_device) - return pm_runtime_put_sync_suspend(proxy_device); - - return 0; + return acpi_dev_runtime_suspend(dev); } static int acpi_lpss_runtime_resume(struct device *dev) @@ -615,12 +600,6 @@ static int acpi_lpss_runtime_resume(struct device *dev) struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); int ret; - if (pdata->dev_desc->flags & LPSS_PROXY_REQ && proxy_device) { - ret = pm_runtime_get_sync(proxy_device); - if (ret) - return ret; - } - ret = acpi_dev_runtime_resume(dev); if (ret) return ret; -- cgit v1.2.3 From 7e36ef8205fffc9aedd1f3db38d15e37753df721 Mon Sep 17 00:00:00 2001 From: Haggai Eran Date: Sun, 1 Feb 2015 15:35:30 +0200 Subject: IB/core: Temporarily disable ex_query_device uverb Commit 5a77abf9a97a ("IB/core: Add support for extended query device caps") added a new extended verb to query the capabilities of RDMA devices, but the semantics of this verb are still under debate [1]. Don't expose this verb to userspace until the ABI is nailed down. [1] [PATCH v1 0/5] IB/core: extended query device caps cleanup for v3.19 http://www.spinics.net/lists/linux-rdma/msg22904.html Signed-off-by: Haggai Eran Reviewed-by: Yann Droneaud Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_main.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index e6c23b9eab33..5db1a8cc388d 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -123,7 +123,6 @@ static int (*uverbs_ex_cmd_table[])(struct ib_uverbs_file *file, struct ib_udata *uhw) = { [IB_USER_VERBS_EX_CMD_CREATE_FLOW] = ib_uverbs_ex_create_flow, [IB_USER_VERBS_EX_CMD_DESTROY_FLOW] = ib_uverbs_ex_destroy_flow, - [IB_USER_VERBS_EX_CMD_QUERY_DEVICE] = ib_uverbs_ex_query_device }; static void ib_uverbs_add_one(struct ib_device *device); -- cgit v1.2.3 From 06cf35f903aa6da0cc8d9f81e9bcd1f7e1b534bb Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Tue, 3 Feb 2015 16:01:24 -0700 Subject: PCI: Handle read-only BARs on AMD CS553x devices Some AMD CS553x devices have read-only BARs because of a firmware or hardware defect. There's a workaround in quirk_cs5536_vsa(), but it no longer works after 36e8164882ca ("PCI: Restore detection of read-only BARs"). Prior to 36e8164882ca, we filled in res->start; afterwards we leave it zeroed out. The quirk only updated the size, so the driver tried to use a region starting at zero, which didn't work. Expand quirk_cs5536_vsa() to read the base addresses from the BARs and hard-code the sizes. On Nix's system BAR 2's read-only value is 0x6200. Prior to 36e8164882ca, we interpret that as a 512-byte BAR based on the lowest-order bit set. Per datasheet sec 5.6.1, that BAR (MFGPT) requires only 64 bytes; use that to avoid clearing any address bits if a platform uses only 64-byte alignment. [bhelgaas: changelog, reduce BAR 2 size to 64] Fixes: 36e8164882ca ("PCI: Restore detection of read-only BARs") Link: https://bugzilla.kernel.org/show_bug.cgi?id=85991#c4 Link: http://support.amd.com/TechDocs/31506_cs5535_databook.pdf Link: http://support.amd.com/TechDocs/33238G_cs5536_db.pdf Reported-and-tested-by: Nix Signed-off-by: Myron Stowe Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # v.2.6.27+ --- drivers/pci/quirks.c | 40 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e52356aa09b8..903d5078b5ed 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -324,18 +324,52 @@ static void quirk_s3_64M(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); +static void quirk_io(struct pci_dev *dev, int pos, unsigned size, + const char *name) +{ + u32 region; + struct pci_bus_region bus_region; + struct resource *res = dev->resource + pos; + + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), ®ion); + + if (!region) + return; + + res->name = pci_name(dev); + res->flags = region & ~PCI_BASE_ADDRESS_IO_MASK; + res->flags |= + (IORESOURCE_IO | IORESOURCE_PCI_FIXED | IORESOURCE_SIZEALIGN); + region &= ~(size - 1); + + /* Convert from PCI bus to resource space */ + bus_region.start = region; + bus_region.end = region + size - 1; + pcibios_bus_to_resource(dev->bus, res, &bus_region); + + dev_info(&dev->dev, FW_BUG "%s quirk: reg 0x%x: %pR\n", + name, PCI_BASE_ADDRESS_0 + (pos << 2), res); +} + /* * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS * ver. 1.33 20070103) don't set the correct ISA PCI region header info. * BAR0 should be 8 bytes; instead, it may be set to something like 8k * (which conflicts w/ BAR1's memory range). + * + * CS553x's ISA PCI BARs may also be read-only (ref: + * https://bugzilla.kernel.org/show_bug.cgi?id=85991 - Comment #4 forward). */ static void quirk_cs5536_vsa(struct pci_dev *dev) { + static char *name = "CS5536 ISA bridge"; + if (pci_resource_len(dev, 0) != 8) { - struct resource *res = &dev->resource[0]; - res->end = res->start + 8 - 1; - dev_info(&dev->dev, "CS5536 ISA bridge bug detected (incorrect header); workaround applied\n"); + quirk_io(dev, 0, 8, name); /* SMB */ + quirk_io(dev, 1, 256, name); /* GPIO */ + quirk_io(dev, 2, 64, name); /* MFGPT */ + dev_info(&dev->dev, "%s bug detected (incorrect header); workaround applied\n", + name); } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); -- cgit v1.2.3 From 72f6510745592c87f612f62ae4f16bb002934df4 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 3 Feb 2015 16:36:16 -0500 Subject: Revert "drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets" This reverts commit 5188cd44c55db3e92cd9e77a40b5baa7ed4340f7. Now that GSO layer can track if fragment id has been selected and can allocate one if necessary, we don't need to do this in tap and macvtap. This reverts most of the code and only keeps the new ipv6 fragment id generation function that is still needed. Fixes: 3d0ad09412ff (drivers/net: Disable UFO through virtio) Signed-off-by: Vladislav Yasevich Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 3 --- drivers/net/tun.c | 6 +----- 2 files changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 7df221788cd4..0b86e46c130b 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -17,7 +17,6 @@ #include #include -#include #include #include #include @@ -589,8 +588,6 @@ static int macvtap_skb_from_vnet_hdr(struct macvtap_queue *q, pr_warn_once("macvtap: %s: using disabled UFO feature; please fix this program\n", current->comm); gso_type = SKB_GSO_UDP; - if (skb->protocol == htons(ETH_P_IPV6)) - ipv6_proxy_select_ident(skb); break; default: return -EINVAL; diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 8c8dc16839a7..5ca42b79b16f 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -65,7 +65,6 @@ #include #include #include -#include #include #include #include @@ -1167,8 +1166,6 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, break; } - skb_reset_network_header(skb); - if (gso.gso_type != VIRTIO_NET_HDR_GSO_NONE) { pr_debug("GSO!\n"); switch (gso.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) { @@ -1189,8 +1186,6 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, current->comm); } skb_shinfo(skb)->gso_type = SKB_GSO_UDP; - if (skb->protocol == htons(ETH_P_IPV6)) - ipv6_proxy_select_ident(skb); break; } default: @@ -1221,6 +1216,7 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, skb_shinfo(skb)->tx_flags |= SKBTX_SHARED_FRAG; } + skb_reset_network_header(skb); skb_probe_transport_header(skb, 0); rxhash = skb_get_hash(skb); -- cgit v1.2.3 From e3e3c423f82a415195a7bbbfa619bfa7b20d2db6 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 3 Feb 2015 16:36:17 -0500 Subject: Revert "drivers/net: Disable UFO through virtio" This reverts commit 3d0ad09412ffe00c9afa201d01effdb6023d09b4. Now that GSO functionality can correctly track if the fragment id has been selected and select a fragment id if necessary, we can re-enable UFO on tap/macvap and virtio devices. Signed-off-by: Vladislav Yasevich Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 13 ++++++++----- drivers/net/tun.c | 19 ++++++++----------- drivers/net/virtio_net.c | 24 ++++++++++-------------- 3 files changed, 26 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 0b86e46c130b..919f4fccc322 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -80,7 +80,7 @@ static struct cdev macvtap_cdev; static const struct proto_ops macvtap_socket_ops; #define TUN_OFFLOADS (NETIF_F_HW_CSUM | NETIF_F_TSO_ECN | NETIF_F_TSO | \ - NETIF_F_TSO6) + NETIF_F_TSO6 | NETIF_F_UFO) #define RX_OFFLOADS (NETIF_F_GRO | NETIF_F_LRO) #define TAP_FEATURES (NETIF_F_GSO | NETIF_F_SG) @@ -585,8 +585,6 @@ static int macvtap_skb_from_vnet_hdr(struct macvtap_queue *q, gso_type = SKB_GSO_TCPV6; break; case VIRTIO_NET_HDR_GSO_UDP: - pr_warn_once("macvtap: %s: using disabled UFO feature; please fix this program\n", - current->comm); gso_type = SKB_GSO_UDP; break; default: @@ -633,6 +631,8 @@ static void macvtap_skb_to_vnet_hdr(struct macvtap_queue *q, vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV4; else if (sinfo->gso_type & SKB_GSO_TCPV6) vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV6; + else if (sinfo->gso_type & SKB_GSO_UDP) + vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_UDP; else BUG(); if (sinfo->gso_type & SKB_GSO_TCP_ECN) @@ -962,6 +962,9 @@ static int set_offload(struct macvtap_queue *q, unsigned long arg) if (arg & TUN_F_TSO6) feature_mask |= NETIF_F_TSO6; } + + if (arg & TUN_F_UFO) + feature_mask |= NETIF_F_UFO; } /* tun/tap driver inverts the usage for TSO offloads, where @@ -972,7 +975,7 @@ static int set_offload(struct macvtap_queue *q, unsigned long arg) * When user space turns off TSO, we turn off GSO/LRO so that * user-space will not receive TSO frames. */ - if (feature_mask & (NETIF_F_TSO | NETIF_F_TSO6)) + if (feature_mask & (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_UFO)) features |= RX_OFFLOADS; else features &= ~RX_OFFLOADS; @@ -1087,7 +1090,7 @@ static long macvtap_ioctl(struct file *file, unsigned int cmd, case TUNSETOFFLOAD: /* let the user check for future flags */ if (arg & ~(TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 | - TUN_F_TSO_ECN)) + TUN_F_TSO_ECN | TUN_F_UFO)) return -EINVAL; rtnl_lock(); diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 5ca42b79b16f..10f9e4021b5a 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -186,7 +186,7 @@ struct tun_struct { struct net_device *dev; netdev_features_t set_features; #define TUN_USER_FEATURES (NETIF_F_HW_CSUM|NETIF_F_TSO_ECN|NETIF_F_TSO| \ - NETIF_F_TSO6) + NETIF_F_TSO6|NETIF_F_UFO) int vnet_hdr_sz; int sndbuf; @@ -1176,18 +1176,8 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; break; case VIRTIO_NET_HDR_GSO_UDP: - { - static bool warned; - - if (!warned) { - warned = true; - netdev_warn(tun->dev, - "%s: using disabled UFO feature; please fix this program\n", - current->comm); - } skb_shinfo(skb)->gso_type = SKB_GSO_UDP; break; - } default: tun->dev->stats.rx_frame_errors++; kfree_skb(skb); @@ -1294,6 +1284,8 @@ static ssize_t tun_put_user(struct tun_struct *tun, gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4; else if (sinfo->gso_type & SKB_GSO_TCPV6) gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6; + else if (sinfo->gso_type & SKB_GSO_UDP) + gso.gso_type = VIRTIO_NET_HDR_GSO_UDP; else { pr_err("unexpected GSO type: " "0x%x, gso_size %d, hdr_len %d\n", @@ -1742,6 +1734,11 @@ static int set_offload(struct tun_struct *tun, unsigned long arg) features |= NETIF_F_TSO6; arg &= ~(TUN_F_TSO4|TUN_F_TSO6); } + + if (arg & TUN_F_UFO) { + features |= NETIF_F_UFO; + arg &= ~TUN_F_UFO; + } } /* This gives the user a way to test for new features in future by diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 5ca97713bfb3..059fdf1bf5ee 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -490,17 +490,8 @@ static void receive_buf(struct virtnet_info *vi, struct receive_queue *rq, skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; break; case VIRTIO_NET_HDR_GSO_UDP: - { - static bool warned; - - if (!warned) { - warned = true; - netdev_warn(dev, - "host using disabled UFO feature; please fix it\n"); - } skb_shinfo(skb)->gso_type = SKB_GSO_UDP; break; - } case VIRTIO_NET_HDR_GSO_TCPV6: skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; break; @@ -888,6 +879,8 @@ static int xmit_skb(struct send_queue *sq, struct sk_buff *skb) hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_TCPV4; else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_TCPV6; + else if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP) + hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_UDP; else BUG(); if (skb_shinfo(skb)->gso_type & SKB_GSO_TCP_ECN) @@ -1748,7 +1741,7 @@ static int virtnet_probe(struct virtio_device *vdev) dev->features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST; if (virtio_has_feature(vdev, VIRTIO_NET_F_GSO)) { - dev->hw_features |= NETIF_F_TSO + dev->hw_features |= NETIF_F_TSO | NETIF_F_UFO | NETIF_F_TSO_ECN | NETIF_F_TSO6; } /* Individual feature bits: what can host handle? */ @@ -1758,9 +1751,11 @@ static int virtnet_probe(struct virtio_device *vdev) dev->hw_features |= NETIF_F_TSO6; if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_ECN)) dev->hw_features |= NETIF_F_TSO_ECN; + if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_UFO)) + dev->hw_features |= NETIF_F_UFO; if (gso) - dev->features |= dev->hw_features & NETIF_F_ALL_TSO; + dev->features |= dev->hw_features & (NETIF_F_ALL_TSO|NETIF_F_UFO); /* (!csum && gso) case will be fixed by register_netdev() */ } if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_CSUM)) @@ -1798,7 +1793,8 @@ static int virtnet_probe(struct virtio_device *vdev) /* If we can receive ANY GSO packets, we must allocate large ones. */ if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) || virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6) || - virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN)) + virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN) || + virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_UFO)) vi->big_packets = true; if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF)) @@ -1994,9 +1990,9 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GUEST_CSUM, VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC, - VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_TSO6, + VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6, VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6, - VIRTIO_NET_F_GUEST_ECN, + VIRTIO_NET_F_GUEST_ECN, VIRTIO_NET_F_GUEST_UFO, VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ, VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ, -- cgit v1.2.3 From 06b19b1b178570b3d843306c636cdadb6e36c0a1 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Tue, 3 Feb 2015 05:00:40 +0800 Subject: net: usb: sr9700: Use 'SR_' prefix for the common register macros The commone register macors (e.g. RSR) is too commont to drivers, it may be conflict with the architectures (e.g. xtensa, sh). The related warnings (with allmodconfig under xtensa): CC [M] drivers/net/usb/sr9700.o In file included from drivers/net/usb/sr9700.c:24:0: drivers/net/usb/sr9700.h:65:0: warning: "RSR" redefined #define RSR 0x06 ^ In file included from ./arch/xtensa/include/asm/bitops.h:22:0, from include/linux/bitops.h:36, from include/linux/kernel.h:10, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/net/usb/sr9700.c:13: ./arch/xtensa/include/asm/processor.h:190:0: note: this is the location of the previous definition #define RSR(v,sr) __asm__ __volatile__ ("rsr %0,"__stringify(sr) : "=a"(v)); ^ Signed-off-by: Chen Gang Signed-off-by: David S. Miller --- drivers/net/usb/sr9700.c | 36 +++++++++++++------------- drivers/net/usb/sr9700.h | 66 ++++++++++++++++++++++++------------------------ 2 files changed, 51 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/sr9700.c b/drivers/net/usb/sr9700.c index 99b69af14274..4a1e9c489f1f 100644 --- a/drivers/net/usb/sr9700.c +++ b/drivers/net/usb/sr9700.c @@ -77,7 +77,7 @@ static int wait_phy_eeprom_ready(struct usbnet *dev, int phy) int ret; udelay(1); - ret = sr_read_reg(dev, EPCR, &tmp); + ret = sr_read_reg(dev, SR_EPCR, &tmp); if (ret < 0) return ret; @@ -98,15 +98,15 @@ static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg, mutex_lock(&dev->phy_mutex); - sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); - sr_write_reg(dev, EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR); + sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); + sr_write_reg(dev, SR_EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR); ret = wait_phy_eeprom_ready(dev, phy); if (ret < 0) goto out_unlock; - sr_write_reg(dev, EPCR, 0x0); - ret = sr_read(dev, EPDR, 2, value); + sr_write_reg(dev, SR_EPCR, 0x0); + ret = sr_read(dev, SR_EPDR, 2, value); netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n", phy, reg, *value, ret); @@ -123,19 +123,19 @@ static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg, mutex_lock(&dev->phy_mutex); - ret = sr_write(dev, EPDR, 2, &value); + ret = sr_write(dev, SR_EPDR, 2, &value); if (ret < 0) goto out_unlock; - sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); - sr_write_reg(dev, EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) : + sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); + sr_write_reg(dev, SR_EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) : (EPCR_WEP | EPCR_ERPRW)); ret = wait_phy_eeprom_ready(dev, phy); if (ret < 0) goto out_unlock; - sr_write_reg(dev, EPCR, 0x0); + sr_write_reg(dev, SR_EPCR, 0x0); out_unlock: mutex_unlock(&dev->phy_mutex); @@ -188,7 +188,7 @@ static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc) if (loc == MII_BMSR) { u8 value; - sr_read_reg(dev, NSR, &value); + sr_read_reg(dev, SR_NSR, &value); if (value & NSR_LINKST) rc = 1; } @@ -228,7 +228,7 @@ static u32 sr9700_get_link(struct net_device *netdev) int rc = 0; /* Get the Link Status directly */ - sr_read_reg(dev, NSR, &value); + sr_read_reg(dev, SR_NSR, &value); if (value & NSR_LINKST) rc = 1; @@ -281,8 +281,8 @@ static void sr9700_set_multicast(struct net_device *netdev) } } - sr_write_async(dev, MAR, SR_MCAST_SIZE, hashes); - sr_write_reg_async(dev, RCR, rx_ctl); + sr_write_async(dev, SR_MAR, SR_MCAST_SIZE, hashes); + sr_write_reg_async(dev, SR_RCR, rx_ctl); } static int sr9700_set_mac_address(struct net_device *netdev, void *p) @@ -297,7 +297,7 @@ static int sr9700_set_mac_address(struct net_device *netdev, void *p) } memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); - sr_write_async(dev, PAR, 6, netdev->dev_addr); + sr_write_async(dev, SR_PAR, 6, netdev->dev_addr); return 0; } @@ -340,7 +340,7 @@ static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf) mii->phy_id_mask = 0x1f; mii->reg_num_mask = 0x1f; - sr_write_reg(dev, NCR, NCR_RST); + sr_write_reg(dev, SR_NCR, NCR_RST); udelay(20); /* read MAC @@ -348,17 +348,17 @@ static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf) * EEPROM automatically to PAR. In case there is no EEPROM externally, * a default MAC address is stored in PAR for making chip work properly. */ - if (sr_read(dev, PAR, ETH_ALEN, netdev->dev_addr) < 0) { + if (sr_read(dev, SR_PAR, ETH_ALEN, netdev->dev_addr) < 0) { netdev_err(netdev, "Error reading MAC address\n"); ret = -ENODEV; goto out; } /* power up and reset phy */ - sr_write_reg(dev, PRR, PRR_PHY_RST); + sr_write_reg(dev, SR_PRR, PRR_PHY_RST); /* at least 10ms, here 20ms for safe */ mdelay(20); - sr_write_reg(dev, PRR, 0); + sr_write_reg(dev, SR_PRR, 0); /* at least 1ms, here 2ms for reading right register */ udelay(2 * 1000); diff --git a/drivers/net/usb/sr9700.h b/drivers/net/usb/sr9700.h index fd687c575e74..258b030277e7 100644 --- a/drivers/net/usb/sr9700.h +++ b/drivers/net/usb/sr9700.h @@ -14,13 +14,13 @@ /* sr9700 spec. register table on Linux platform */ /* Network Control Reg */ -#define NCR 0x00 +#define SR_NCR 0x00 #define NCR_RST (1 << 0) #define NCR_LBK (3 << 1) #define NCR_FDX (1 << 3) #define NCR_WAKEEN (1 << 6) /* Network Status Reg */ -#define NSR 0x01 +#define SR_NSR 0x01 #define NSR_RXRDY (1 << 0) #define NSR_RXOV (1 << 1) #define NSR_TX1END (1 << 2) @@ -30,7 +30,7 @@ #define NSR_LINKST (1 << 6) #define NSR_SPEED (1 << 7) /* Tx Control Reg */ -#define TCR 0x02 +#define SR_TCR 0x02 #define TCR_CRC_DIS (1 << 1) #define TCR_PAD_DIS (1 << 2) #define TCR_LC_CARE (1 << 3) @@ -38,7 +38,7 @@ #define TCR_EXCECM (1 << 5) #define TCR_LF_EN (1 << 6) /* Tx Status Reg for Packet Index 1 */ -#define TSR1 0x03 +#define SR_TSR1 0x03 #define TSR1_EC (1 << 2) #define TSR1_COL (1 << 3) #define TSR1_LC (1 << 4) @@ -46,7 +46,7 @@ #define TSR1_LOC (1 << 6) #define TSR1_TLF (1 << 7) /* Tx Status Reg for Packet Index 2 */ -#define TSR2 0x04 +#define SR_TSR2 0x04 #define TSR2_EC (1 << 2) #define TSR2_COL (1 << 3) #define TSR2_LC (1 << 4) @@ -54,7 +54,7 @@ #define TSR2_LOC (1 << 6) #define TSR2_TLF (1 << 7) /* Rx Control Reg*/ -#define RCR 0x05 +#define SR_RCR 0x05 #define RCR_RXEN (1 << 0) #define RCR_PRMSC (1 << 1) #define RCR_RUNT (1 << 2) @@ -62,87 +62,87 @@ #define RCR_DIS_CRC (1 << 4) #define RCR_DIS_LONG (1 << 5) /* Rx Status Reg */ -#define RSR 0x06 +#define SR_RSR 0x06 #define RSR_AE (1 << 2) #define RSR_MF (1 << 6) #define RSR_RF (1 << 7) /* Rx Overflow Counter Reg */ -#define ROCR 0x07 +#define SR_ROCR 0x07 #define ROCR_ROC (0x7F << 0) #define ROCR_RXFU (1 << 7) /* Back Pressure Threshold Reg */ -#define BPTR 0x08 +#define SR_BPTR 0x08 #define BPTR_JPT (0x0F << 0) #define BPTR_BPHW (0x0F << 4) /* Flow Control Threshold Reg */ -#define FCTR 0x09 +#define SR_FCTR 0x09 #define FCTR_LWOT (0x0F << 0) #define FCTR_HWOT (0x0F << 4) /* rx/tx Flow Control Reg */ -#define FCR 0x0A +#define SR_FCR 0x0A #define FCR_FLCE (1 << 0) #define FCR_BKPA (1 << 4) #define FCR_TXPEN (1 << 5) #define FCR_TXPF (1 << 6) #define FCR_TXP0 (1 << 7) /* Eeprom & Phy Control Reg */ -#define EPCR 0x0B +#define SR_EPCR 0x0B #define EPCR_ERRE (1 << 0) #define EPCR_ERPRW (1 << 1) #define EPCR_ERPRR (1 << 2) #define EPCR_EPOS (1 << 3) #define EPCR_WEP (1 << 4) /* Eeprom & Phy Address Reg */ -#define EPAR 0x0C +#define SR_EPAR 0x0C #define EPAR_EROA (0x3F << 0) #define EPAR_PHY_ADR_MASK (0x03 << 6) #define EPAR_PHY_ADR (0x01 << 6) /* Eeprom & Phy Data Reg */ -#define EPDR 0x0D /* 0x0D ~ 0x0E for Data Reg Low & High */ +#define SR_EPDR 0x0D /* 0x0D ~ 0x0E for Data Reg Low & High */ /* Wakeup Control Reg */ -#define WCR 0x0F +#define SR_WCR 0x0F #define WCR_MAGICST (1 << 0) #define WCR_LINKST (1 << 2) #define WCR_MAGICEN (1 << 3) #define WCR_LINKEN (1 << 5) /* Physical Address Reg */ -#define PAR 0x10 /* 0x10 ~ 0x15 6 bytes for PAR */ +#define SR_PAR 0x10 /* 0x10 ~ 0x15 6 bytes for PAR */ /* Multicast Address Reg */ -#define MAR 0x16 /* 0x16 ~ 0x1D 8 bytes for MAR */ +#define SR_MAR 0x16 /* 0x16 ~ 0x1D 8 bytes for MAR */ /* 0x1e unused */ /* Phy Reset Reg */ -#define PRR 0x1F +#define SR_PRR 0x1F #define PRR_PHY_RST (1 << 0) /* Tx sdram Write Pointer Address Low */ -#define TWPAL 0x20 +#define SR_TWPAL 0x20 /* Tx sdram Write Pointer Address High */ -#define TWPAH 0x21 +#define SR_TWPAH 0x21 /* Tx sdram Read Pointer Address Low */ -#define TRPAL 0x22 +#define SR_TRPAL 0x22 /* Tx sdram Read Pointer Address High */ -#define TRPAH 0x23 +#define SR_TRPAH 0x23 /* Rx sdram Write Pointer Address Low */ -#define RWPAL 0x24 +#define SR_RWPAL 0x24 /* Rx sdram Write Pointer Address High */ -#define RWPAH 0x25 +#define SR_RWPAH 0x25 /* Rx sdram Read Pointer Address Low */ -#define RRPAL 0x26 +#define SR_RRPAL 0x26 /* Rx sdram Read Pointer Address High */ -#define RRPAH 0x27 +#define SR_RRPAH 0x27 /* Vendor ID register */ -#define VID 0x28 /* 0x28 ~ 0x29 2 bytes for VID */ +#define SR_VID 0x28 /* 0x28 ~ 0x29 2 bytes for VID */ /* Product ID register */ -#define PID 0x2A /* 0x2A ~ 0x2B 2 bytes for PID */ +#define SR_PID 0x2A /* 0x2A ~ 0x2B 2 bytes for PID */ /* CHIP Revision register */ -#define CHIPR 0x2C +#define SR_CHIPR 0x2C /* 0x2D --> 0xEF unused */ /* USB Device Address */ -#define USBDA 0xF0 +#define SR_USBDA 0xF0 #define USBDA_USBFA (0x7F << 0) /* RX packet Counter Reg */ -#define RXC 0xF1 +#define SR_RXC 0xF1 /* Tx packet Counter & USB Status Reg */ -#define TXC_USBS 0xF2 +#define SR_TXC_USBS 0xF2 #define TXC_USBS_TXC0 (1 << 0) #define TXC_USBS_TXC1 (1 << 1) #define TXC_USBS_TXC2 (1 << 2) @@ -150,7 +150,7 @@ #define TXC_USBS_SUSFLAG (1 << 6) #define TXC_USBS_RXFAULT (1 << 7) /* USB Control register */ -#define USBC 0xF4 +#define SR_USBC 0xF4 #define USBC_EP3NAK (1 << 4) #define USBC_EP3ACK (1 << 5) -- cgit v1.2.3 From 75300ad2d91fac50852dc4123977d55e64c874cc Mon Sep 17 00:00:00 2001 From: Sanjeev Sharma Date: Tue, 3 Feb 2015 13:02:02 +0530 Subject: gianfar: correct the bad expression while writing bit-pattern This patch correct the bad expression while writing the bit-pattern from software's buffer to hardware registers. Signed-off-by: Sanjeev Sharma Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c index 3e1a9c1a67a9..fda12fb32ec7 100644 --- a/drivers/net/ethernet/freescale/gianfar_ethtool.c +++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c @@ -1586,7 +1586,7 @@ static int gfar_write_filer_table(struct gfar_private *priv, return -EBUSY; /* Fill regular entries */ - for (; i < MAX_FILER_IDX - 1 && (tab->fe[i].ctrl | tab->fe[i].ctrl); + for (; i < MAX_FILER_IDX - 1 && (tab->fe[i].ctrl | tab->fe[i].prop); i++) gfar_write_filer(priv, i, tab->fe[i].ctrl, tab->fe[i].prop); /* Fill the rest with fall-troughs */ -- cgit v1.2.3 From 5201aa49b0fc12d9bf911090744ca04066bad4a7 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Tue, 3 Feb 2015 11:07:06 +0200 Subject: vhost/net: fix up num_buffers endian-ness In virtio 1.0 mode, when mergeable buffers are enabled on a big-endian host, num_buffers wasn't byte-swapped correctly, so large incoming packets got corrupted. To fix, fill it in within hdr - this also makes sure it gets the correct type. Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/vhost/net.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index d415d69dc237..9484d5652ca5 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -650,8 +650,10 @@ static void handle_rx(struct vhost_net *net) break; } /* TODO: Should check and handle checksum. */ + + hdr.num_buffers = cpu_to_vhost16(vq, headcount); if (likely(mergeable) && - memcpy_toiovecend(nvq->hdr, (unsigned char *)&headcount, + memcpy_toiovecend(nvq->hdr, (void *)&hdr.num_buffers, offsetof(typeof(hdr), num_buffers), sizeof hdr.num_buffers)) { vq_err(vq, "Failed num_buffers write"); -- cgit v1.2.3 From 7f551b1eee63dca6571fc44329b807aab7d5fc5c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 3 Feb 2015 17:51:23 +0100 Subject: drm/cirrus: Limit modes depending on bpp option The commit [8975626ea35a: drm/cirrus: allow 32bpp framebuffers for cirrus drm] broke X modesetting driver because cirrus driver still provides the full list of modes up to 1280x1024 while the 32bpp can support only up to 800x600. We might be able to filter out the invalid modes in mode_valid callback, but unfortunately the bpp in question can't be referred there for now (let me know if there is a better way to retrieve the bpp for the probed fb). So, instead, this patch adds the bpp module option to specify the maximal bpp explicitly and limits the resolutions in get_modes depending on its value. The default value is set to 24 so that the existing stuff keeps working. If you need a new 32bpp feature, specify cirrus.bpp=32 option explicitly. Fixes: 8975626ea35a ('drm/cirrus: allow 32bpp framebuffers for cirrus drm') Signed-off-by: Takashi Iwai Signed-off-by: Dave Airlie --- drivers/gpu/drm/cirrus/cirrus_drv.c | 3 +++ drivers/gpu/drm/cirrus/cirrus_drv.h | 3 +++ drivers/gpu/drm/cirrus/cirrus_main.c | 2 ++ drivers/gpu/drm/cirrus/cirrus_mode.c | 9 +++++++-- 4 files changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/cirrus/cirrus_drv.c b/drivers/gpu/drm/cirrus/cirrus_drv.c index c2a1cba1e984..b9140032962d 100644 --- a/drivers/gpu/drm/cirrus/cirrus_drv.c +++ b/drivers/gpu/drm/cirrus/cirrus_drv.c @@ -16,9 +16,12 @@ #include "cirrus_drv.h" int cirrus_modeset = -1; +int cirrus_bpp = 24; MODULE_PARM_DESC(modeset, "Disable/Enable modesetting"); module_param_named(modeset, cirrus_modeset, int, 0400); +MODULE_PARM_DESC(bpp, "Max bits-per-pixel (default:24)"); +module_param_named(bpp, cirrus_bpp, int, 0400); /* * This is the generic driver code. This binds the driver to the drm core, diff --git a/drivers/gpu/drm/cirrus/cirrus_drv.h b/drivers/gpu/drm/cirrus/cirrus_drv.h index 693a4565c4ff..705061537a27 100644 --- a/drivers/gpu/drm/cirrus/cirrus_drv.h +++ b/drivers/gpu/drm/cirrus/cirrus_drv.h @@ -262,4 +262,7 @@ static inline void cirrus_bo_unreserve(struct cirrus_bo *bo) int cirrus_bo_push_sysram(struct cirrus_bo *bo); int cirrus_bo_pin(struct cirrus_bo *bo, u32 pl_flag, u64 *gpu_addr); + +extern int cirrus_bpp; + #endif /* __CIRRUS_DRV_H__ */ diff --git a/drivers/gpu/drm/cirrus/cirrus_main.c b/drivers/gpu/drm/cirrus/cirrus_main.c index 4c2d68e9102d..e4b976658087 100644 --- a/drivers/gpu/drm/cirrus/cirrus_main.c +++ b/drivers/gpu/drm/cirrus/cirrus_main.c @@ -320,6 +320,8 @@ bool cirrus_check_framebuffer(struct cirrus_device *cdev, int width, int height, const int max_pitch = 0x1FF << 3; /* (4096 - 1) & ~111b bytes */ const int max_size = cdev->mc.vram_size; + if (bpp > cirrus_bpp) + return false; if (bpp > 32) return false; diff --git a/drivers/gpu/drm/cirrus/cirrus_mode.c b/drivers/gpu/drm/cirrus/cirrus_mode.c index 99d4a74ffeaf..61385f2298bf 100644 --- a/drivers/gpu/drm/cirrus/cirrus_mode.c +++ b/drivers/gpu/drm/cirrus/cirrus_mode.c @@ -501,8 +501,13 @@ static int cirrus_vga_get_modes(struct drm_connector *connector) int count; /* Just add a static list of modes */ - count = drm_add_modes_noedid(connector, 1280, 1024); - drm_set_preferred_mode(connector, 1024, 768); + if (cirrus_bpp <= 24) { + count = drm_add_modes_noedid(connector, 1280, 1024); + drm_set_preferred_mode(connector, 1024, 768); + } else { + count = drm_add_modes_noedid(connector, 800, 600); + drm_set_preferred_mode(connector, 800, 600); + } return count; } -- cgit v1.2.3 From 211fcf6d2100e625ec1d4a50e8adf67370a37bad Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Tue, 3 Feb 2015 12:49:55 -0600 Subject: amd-xgbe: Adjust for zero-based traffic class count The number of traffic classes reported by the hardware is zero-based so increment the value returned to get an actual count. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index 7bb5f07dbeef..124614096456 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -552,13 +552,14 @@ void xgbe_get_all_hw_features(struct xgbe_prv_data *pdata) break; } - /* The Queue and Channel counts are zero based so increment them + /* The Queue, Channel and TC counts are zero based so increment them * to get the actual number */ hw_feat->rx_q_cnt++; hw_feat->tx_q_cnt++; hw_feat->rx_ch_cnt++; hw_feat->tx_ch_cnt++; + hw_feat->tc_cnt++; DBGPR("<--xgbe_get_all_hw_features\n"); } -- cgit v1.2.3 From cf180b8acf2627fdc9ab472ed0dc565803cd388a Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Tue, 3 Feb 2015 14:14:32 -0600 Subject: amd-xgbe: Set RSS enablement based on hardware features The RSS support requires enablement based on the features reported by the hardware. The setting of this flag is missing. Add support to set the RSS enablement flag based on the reported hardware features. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index 124614096456..e5ffb2ccb67d 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -523,6 +523,7 @@ void xgbe_get_all_hw_features(struct xgbe_prv_data *pdata) hw_feat->sph = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, SPHEN); hw_feat->tso = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, TSOEN); hw_feat->dma_debug = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, DBGMEMA); + hw_feat->rss = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, RSSEN); hw_feat->tc_cnt = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, NUMTC); hw_feat->hash_table_size = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, HASHTBLSZ); -- cgit v1.2.3 From f31ec95fa19e07a8beebcc0297284f23aa57967e Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Wed, 4 Feb 2015 05:41:25 -0500 Subject: qlcnic: Fix NAPI poll routine for Tx completion After d75b1ade567f ("net: less interrupt masking in NAPI") driver's NAPI poll routine is expected to return exact budget value if it wants to be re-called. Signed-off-by: Shahed Shaikh Fixes: d75b1ade567f ("net: less interrupt masking in NAPI") Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 27 +++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 18e5de72e9b4..4e1f58cf19ce 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -967,7 +967,12 @@ static int qlcnic_poll(struct napi_struct *napi, int budget) tx_complete = qlcnic_process_cmd_ring(adapter, tx_ring, budget); work_done = qlcnic_process_rcv_ring(sds_ring, budget); - if ((work_done < budget) && tx_complete) { + + /* Check if we need a repoll */ + if (!tx_complete) + work_done = budget; + + if (work_done < budget) { napi_complete(&sds_ring->napi); if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) { qlcnic_enable_sds_intr(adapter, sds_ring); @@ -992,6 +997,9 @@ static int qlcnic_tx_poll(struct napi_struct *napi, int budget) napi_complete(&tx_ring->napi); if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) qlcnic_enable_tx_intr(adapter, tx_ring); + } else { + /* As qlcnic_process_cmd_ring() returned 0, we need a repoll*/ + work_done = budget; } return work_done; @@ -1950,7 +1958,12 @@ static int qlcnic_83xx_msix_sriov_vf_poll(struct napi_struct *napi, int budget) tx_complete = qlcnic_process_cmd_ring(adapter, tx_ring, budget); work_done = qlcnic_83xx_process_rcv_ring(sds_ring, budget); - if ((work_done < budget) && tx_complete) { + + /* Check if we need a repoll */ + if (!tx_complete) + work_done = budget; + + if (work_done < budget) { napi_complete(&sds_ring->napi); qlcnic_enable_sds_intr(adapter, sds_ring); } @@ -1973,7 +1986,12 @@ static int qlcnic_83xx_poll(struct napi_struct *napi, int budget) tx_complete = qlcnic_process_cmd_ring(adapter, tx_ring, budget); work_done = qlcnic_83xx_process_rcv_ring(sds_ring, budget); - if ((work_done < budget) && tx_complete) { + + /* Check if we need a repoll */ + if (!tx_complete) + work_done = budget; + + if (work_done < budget) { napi_complete(&sds_ring->napi); qlcnic_enable_sds_intr(adapter, sds_ring); } @@ -1995,6 +2013,9 @@ static int qlcnic_83xx_msix_tx_poll(struct napi_struct *napi, int budget) napi_complete(&tx_ring->napi); if (test_bit(__QLCNIC_DEV_UP , &adapter->state)) qlcnic_enable_tx_intr(adapter, tx_ring); + } else { + /* need a repoll */ + work_done = budget; } return work_done; -- cgit v1.2.3