From 2d3eda67dd2a02087a2ae6916c92ee1966945b88 Mon Sep 17 00:00:00 2001 From: Thomas Elste Date: Mon, 21 Sep 2015 16:30:47 +0200 Subject: regulator: tps65023: add device tree support Add device tree based initialization support for tps65023 regulators. Therefore add macros for regulator definition setting of_match and regulators_node members. Add initialization of regulator_desc data using these macros. Remove old regulator_desc initialization. Add device tree binding document for tps65023 regulators. Signed-off-by: Thomas Elste Signed-off-by: Mark Brown --- drivers/regulator/tps65023-regulator.c | 282 +++++++++++++-------------------- 1 file changed, 108 insertions(+), 174 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c index 5cc19b44974a..d2c3d7cc35f5 100644 --- a/drivers/regulator/tps65023-regulator.c +++ b/drivers/regulator/tps65023-regulator.c @@ -86,6 +86,42 @@ #define TPS65023_MAX_REG_ID TPS65023_LDO_2 +#define TPS65023_REGULATOR_DCDC(_num, _t, _em) \ + { \ + .name = "VDCDC"#_num, \ + .of_match = of_match_ptr("VDCDC"#_num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = TPS65023_DCDC_##_num, \ + .n_voltages = ARRAY_SIZE(_t), \ + .ops = &tps65023_dcdc_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .volt_table = _t, \ + .vsel_reg = TPS65023_REG_DEF_CORE, \ + .vsel_mask = ARRAY_SIZE(_t) - 1, \ + .enable_mask = _em, \ + .enable_reg = TPS65023_REG_REG_CTRL, \ + .apply_reg = TPS65023_REG_CON_CTRL2, \ + .apply_bit = TPS65023_REG_CTRL2_GO, \ + } \ + +#define TPS65023_REGULATOR_LDO(_num, _t, _vm) \ + { \ + .name = "LDO"#_num, \ + .of_match = of_match_ptr("LDO"#_num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = TPS65023_LDO_##_num, \ + .n_voltages = ARRAY_SIZE(_t), \ + .ops = &tps65023_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .volt_table = _t, \ + .vsel_reg = TPS65023_REG_LDO_CTRL, \ + .vsel_mask = _vm, \ + .enable_mask = 1 << (_num), \ + .enable_reg = TPS65023_REG_REG_CTRL, \ + } \ + /* Supported voltage values for regulators */ static const unsigned int VCORE_VSEL_table[] = { 800000, 825000, 850000, 875000, @@ -124,25 +160,16 @@ static const unsigned int TPS65023_LDO2_VSEL_table[] = { 2500000, 2800000, 3000000, 3300000, }; -/* Regulator specific details */ -struct tps_info { - const char *name; - u8 table_len; - const unsigned int *table; -}; - /* PMIC details */ struct tps_pmic { - struct regulator_desc desc[TPS65023_NUM_REGULATOR]; struct regulator_dev *rdev[TPS65023_NUM_REGULATOR]; - const struct tps_info *info[TPS65023_NUM_REGULATOR]; + const struct tps_driver_data *driver_data; struct regmap *regmap; - u8 core_regulator; }; /* Struct passed as driver data */ struct tps_driver_data { - const struct tps_info *info; + const struct regulator_desc *desc; u8 core_regulator; }; @@ -154,7 +181,7 @@ static int tps65023_dcdc_get_voltage_sel(struct regulator_dev *dev) if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3) return -EINVAL; - if (dcdc != tps->core_regulator) + if (dcdc != tps->driver_data->core_regulator) return 0; return regulator_get_voltage_sel_regmap(dev); @@ -166,7 +193,7 @@ static int tps65023_dcdc_set_voltage_sel(struct regulator_dev *dev, struct tps_pmic *tps = rdev_get_drvdata(dev); int dcdc = rdev_get_id(dev); - if (dcdc != tps->core_regulator) + if (dcdc != tps->driver_data->core_regulator) return -EINVAL; return regulator_set_voltage_sel_regmap(dev, selector); @@ -199,30 +226,60 @@ static const struct regmap_config tps65023_regmap_config = { .val_bits = 8, }; +static const struct regulator_desc tps65020_regulators[] = { + TPS65023_REGULATOR_DCDC(1, DCDC_FIXED_3300000_VSEL_table, 0x20), + TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_1800000_VSEL_table, 0x10), + TPS65023_REGULATOR_DCDC(3, VCORE_VSEL_table, 0x08), + TPS65023_REGULATOR_LDO(1, TPS65020_LDO_VSEL_table, 0x07), + TPS65023_REGULATOR_LDO(2, TPS65020_LDO_VSEL_table, 0x70), +}; + +static const struct regulator_desc tps65021_regulators[] = { + TPS65023_REGULATOR_DCDC(1, DCDC_FIXED_3300000_VSEL_table, 0x20), + TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_1800000_VSEL_table, 0x10), + TPS65023_REGULATOR_DCDC(3, VCORE_VSEL_table, 0x08), + TPS65023_REGULATOR_LDO(1, TPS65023_LDO1_VSEL_table, 0x07), + TPS65023_REGULATOR_LDO(2, TPS65023_LDO2_VSEL_table, 0x70), +}; + +static const struct regulator_desc tps65023_regulators[] = { + TPS65023_REGULATOR_DCDC(1, VCORE_VSEL_table, 0x20), + TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_3300000_VSEL_table, 0x10), + TPS65023_REGULATOR_DCDC(3, DCDC_FIXED_1800000_VSEL_table, 0x08), + TPS65023_REGULATOR_LDO(1, TPS65023_LDO1_VSEL_table, 0x07), + TPS65023_REGULATOR_LDO(2, TPS65023_LDO2_VSEL_table, 0x70), +}; + +static struct tps_driver_data tps65020_drv_data = { + .desc = tps65020_regulators, + .core_regulator = TPS65023_DCDC_3, +}; + +static struct tps_driver_data tps65021_drv_data = { + .desc = tps65021_regulators, + .core_regulator = TPS65023_DCDC_3, +}; + +static struct tps_driver_data tps65023_drv_data = { + .desc = tps65023_regulators, + .core_regulator = TPS65023_DCDC_1, +}; + static int tps_65023_probe(struct i2c_client *client, const struct i2c_device_id *id) { - const struct tps_driver_data *drv_data = (void *)id->driver_data; - const struct tps_info *info = drv_data->info; + struct regulator_init_data *init_data = dev_get_platdata(&client->dev); struct regulator_config config = { }; - struct regulator_init_data *init_data; - struct regulator_dev *rdev; struct tps_pmic *tps; int i; int error; - /** - * init_data points to array of regulator_init structures - * coming from the board-evm file. - */ - init_data = dev_get_platdata(&client->dev); - if (!init_data) - return -EIO; - tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); if (!tps) return -ENOMEM; + tps->driver_data = (struct tps_driver_data *)id->driver_data; + tps->regmap = devm_regmap_init_i2c(client, &tps65023_regmap_config); if (IS_ERR(tps->regmap)) { error = PTR_ERR(tps->regmap); @@ -232,58 +289,22 @@ static int tps_65023_probe(struct i2c_client *client, } /* common for all regulators */ - tps->core_regulator = drv_data->core_regulator; - - for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) { - /* Store regulator specific information */ - tps->info[i] = info; - - tps->desc[i].name = info->name; - tps->desc[i].id = i; - tps->desc[i].n_voltages = info->table_len; - tps->desc[i].volt_table = info->table; - tps->desc[i].ops = (i > TPS65023_DCDC_3 ? - &tps65023_ldo_ops : &tps65023_dcdc_ops); - tps->desc[i].type = REGULATOR_VOLTAGE; - tps->desc[i].owner = THIS_MODULE; - - tps->desc[i].enable_reg = TPS65023_REG_REG_CTRL; - switch (i) { - case TPS65023_LDO_1: - tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL; - tps->desc[i].vsel_mask = 0x07; - tps->desc[i].enable_mask = 1 << 1; - break; - case TPS65023_LDO_2: - tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL; - tps->desc[i].vsel_mask = 0x70; - tps->desc[i].enable_mask = 1 << 2; - break; - default: /* DCDCx */ - tps->desc[i].enable_mask = - 1 << (TPS65023_NUM_REGULATOR - i); - tps->desc[i].vsel_reg = TPS65023_REG_DEF_CORE; - tps->desc[i].vsel_mask = info->table_len - 1; - tps->desc[i].apply_reg = TPS65023_REG_CON_CTRL2; - tps->desc[i].apply_bit = TPS65023_REG_CTRL2_GO; - } + config.dev = &client->dev; + config.driver_data = tps; + config.regmap = tps->regmap; - config.dev = &client->dev; - config.init_data = init_data; - config.driver_data = tps; - config.regmap = tps->regmap; + for (i = 0; i < TPS65023_NUM_REGULATOR; i++) { + if (init_data) + config.init_data = &init_data[i]; /* Register the regulators */ - rdev = devm_regulator_register(&client->dev, &tps->desc[i], - &config); - if (IS_ERR(rdev)) { + tps->rdev[i] = devm_regulator_register(&client->dev, + &tps->driver_data->desc[i], &config); + if (IS_ERR(tps->rdev[i])) { dev_err(&client->dev, "failed to register %s\n", id->name); - return PTR_ERR(rdev); + return PTR_ERR(tps->rdev[i]); } - - /* Save regulator for cleanup */ - tps->rdev[i] = rdev; } i2c_set_clientdata(client, tps); @@ -296,120 +317,33 @@ static int tps_65023_probe(struct i2c_client *client, return 0; } -static const struct tps_info tps65020_regs[] = { - { - .name = "VDCDC1", - .table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table), - .table = DCDC_FIXED_3300000_VSEL_table, - }, - { - .name = "VDCDC2", - .table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table), - .table = DCDC_FIXED_1800000_VSEL_table, - }, - { - .name = "VDCDC3", - .table_len = ARRAY_SIZE(VCORE_VSEL_table), - .table = VCORE_VSEL_table, - }, - { - .name = "LDO1", - .table_len = ARRAY_SIZE(TPS65020_LDO_VSEL_table), - .table = TPS65020_LDO_VSEL_table, - }, - { - .name = "LDO2", - .table_len = ARRAY_SIZE(TPS65020_LDO_VSEL_table), - .table = TPS65020_LDO_VSEL_table, - }, -}; - -static const struct tps_info tps65021_regs[] = { - { - .name = "VDCDC1", - .table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table), - .table = DCDC_FIXED_3300000_VSEL_table, - }, - { - .name = "VDCDC2", - .table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table), - .table = DCDC_FIXED_1800000_VSEL_table, - }, - { - .name = "VDCDC3", - .table_len = ARRAY_SIZE(VCORE_VSEL_table), - .table = VCORE_VSEL_table, - }, - { - .name = "LDO1", - .table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table), - .table = TPS65023_LDO1_VSEL_table, - }, - { - .name = "LDO2", - .table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table), - .table = TPS65023_LDO2_VSEL_table, - }, +static const struct of_device_id tps65023_of_match[] = { + { .compatible = "ti,tps65020", .data = &tps65020_drv_data}, + { .compatible = "ti,tps65021", .data = &tps65021_drv_data}, + { .compatible = "ti,tps65023", .data = &tps65023_drv_data}, + {}, }; +MODULE_DEVICE_TABLE(of, tps65023_of_match); -static const struct tps_info tps65023_regs[] = { - { - .name = "VDCDC1", - .table_len = ARRAY_SIZE(VCORE_VSEL_table), - .table = VCORE_VSEL_table, - }, - { - .name = "VDCDC2", - .table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table), - .table = DCDC_FIXED_3300000_VSEL_table, - }, - { - .name = "VDCDC3", - .table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table), - .table = DCDC_FIXED_1800000_VSEL_table, - }, - { - .name = "LDO1", - .table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table), - .table = TPS65023_LDO1_VSEL_table, - }, +static const struct i2c_device_id tps_65023_id[] = { { - .name = "LDO2", - .table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table), - .table = TPS65023_LDO2_VSEL_table, + .name = "tps65023", + .driver_data = (kernel_ulong_t)&tps65023_drv_data + }, { + .name = "tps65021", + .driver_data = (kernel_ulong_t)&tps65021_drv_data + }, { + .name = "tps65020", + .driver_data = (kernel_ulong_t)&tps65020_drv_data }, -}; - -static struct tps_driver_data tps65020_drv_data = { - .info = tps65020_regs, - .core_regulator = TPS65023_DCDC_3, -}; - -static struct tps_driver_data tps65021_drv_data = { - .info = tps65021_regs, - .core_regulator = TPS65023_DCDC_3, -}; - -static struct tps_driver_data tps65023_drv_data = { - .info = tps65023_regs, - .core_regulator = TPS65023_DCDC_1, -}; - -static const struct i2c_device_id tps_65023_id[] = { - {.name = "tps65023", - .driver_data = (unsigned long) &tps65023_drv_data}, - {.name = "tps65021", - .driver_data = (unsigned long) &tps65021_drv_data,}, - {.name = "tps65020", - .driver_data = (unsigned long) &tps65020_drv_data}, { }, }; - MODULE_DEVICE_TABLE(i2c, tps_65023_id); static struct i2c_driver tps_65023_i2c_driver = { .driver = { .name = "tps65023", + .of_match_table = of_match_ptr(tps65023_of_match), }, .probe = tps_65023_probe, .id_table = tps_65023_id, -- cgit v1.2.3 From 9f01cd4a915e13dda6a61b989229015687ffd58f Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 30 Sep 2015 16:05:42 +0200 Subject: regulator: core: introduce function to lock regulators and its supplies Each regulator_dev is locked with its own mutex. This is fine as long as only one regulator_dev is locked, but makes lockdep unhappy when we have to walk up the supply chain like it can happen in regulator_get_voltage: regulator_get_voltage -> mutex_lock(®ulator->rdev->mutex) -> _regulator_get_voltage(regulator->rdev) -> regulator_get_voltage(rdev->supply) -> mutex_lock(®ulator->rdev->mutex); This causes lockdep to issue a possible deadlock warning. There are at least two ways to work around this: - We can always lock the whole supply chain using the functions introduced with this patch. - We could store the current voltage in struct regulator_rdev so that we do not have to walk up the supply chain for the _regulator_get_voltage case. Anyway, regulator_lock_supply/regulator_unlock_supply will be needed once we allow regulator_set_voltage to optimize the supply voltages. Signed-off-by: Sascha Hauer Signed-off-by: Mark Brown --- drivers/regulator/core.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 7a85ac9e32c5..1f9ff55b3620 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -131,6 +131,45 @@ static bool have_full_constraints(void) return has_full_constraints || of_have_populated_dt(); } +/** + * regulator_lock_supply - lock a regulator and its supplies + * @rdev: regulator source + */ +static void regulator_lock_supply(struct regulator_dev *rdev) +{ + struct regulator *supply; + int i = 0; + + while (1) { + mutex_lock_nested(&rdev->mutex, i++); + supply = rdev->supply; + + if (!rdev->supply) + return; + + rdev = supply->rdev; + } +} + +/** + * regulator_unlock_supply - unlock a regulator and its supplies + * @rdev: regulator source + */ +static void regulator_unlock_supply(struct regulator_dev *rdev) +{ + struct regulator *supply; + + while (1) { + mutex_unlock(&rdev->mutex); + supply = rdev->supply; + + if (!rdev->supply) + return; + + rdev = supply->rdev; + } +} + /** * of_get_regulator - get a regulator device node based on supply name * @dev: Device pointer for the consumer (of regulator) device -- cgit v1.2.3 From 3a40cfc36bb3d2e25c9af31e56863ea7144c5324 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 30 Sep 2015 16:05:43 +0200 Subject: regulator: core: create unlocked version of regulator_list_voltage The unlocked version will be needed when we start propagating voltage changes to the supply regulators. Signed-off-by: Sascha Hauer Signed-off-by: Mark Brown --- drivers/regulator/core.c | 62 +++++++++++++++++++++++++++--------------------- 1 file changed, 35 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 1f9ff55b3620..f28c133693ad 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2348,6 +2348,40 @@ static int _regulator_is_enabled(struct regulator_dev *rdev) return rdev->desc->ops->is_enabled(rdev); } +static int _regulator_list_voltage(struct regulator *regulator, + unsigned selector, int lock) +{ + struct regulator_dev *rdev = regulator->rdev; + const struct regulator_ops *ops = rdev->desc->ops; + int ret; + + if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector) + return rdev->desc->fixed_uV; + + if (ops->list_voltage) { + if (selector >= rdev->desc->n_voltages) + return -EINVAL; + if (lock) + mutex_lock(&rdev->mutex); + ret = ops->list_voltage(rdev, selector); + if (lock) + mutex_unlock(&rdev->mutex); + } else if (rdev->supply) { + ret = _regulator_list_voltage(rdev->supply, selector, lock); + } else { + return -EINVAL; + } + + if (ret > 0) { + if (ret < rdev->constraints->min_uV) + ret = 0; + else if (ret > rdev->constraints->max_uV) + ret = 0; + } + + return ret; +} + /** * regulator_is_enabled - is the regulator output enabled * @regulator: regulator source @@ -2437,33 +2471,7 @@ EXPORT_SYMBOL_GPL(regulator_count_voltages); */ int regulator_list_voltage(struct regulator *regulator, unsigned selector) { - struct regulator_dev *rdev = regulator->rdev; - const struct regulator_ops *ops = rdev->desc->ops; - int ret; - - if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector) - return rdev->desc->fixed_uV; - - if (ops->list_voltage) { - if (selector >= rdev->desc->n_voltages) - return -EINVAL; - mutex_lock(&rdev->mutex); - ret = ops->list_voltage(rdev, selector); - mutex_unlock(&rdev->mutex); - } else if (rdev->supply) { - ret = regulator_list_voltage(rdev->supply, selector); - } else { - return -EINVAL; - } - - if (ret > 0) { - if (ret < rdev->constraints->min_uV) - ret = 0; - else if (ret > rdev->constraints->max_uV) - ret = 0; - } - - return ret; + return _regulator_list_voltage(regulator, selector, 1); } EXPORT_SYMBOL_GPL(regulator_list_voltage); -- cgit v1.2.3 From 7e50711993552800644a4667daa0f569a7665eca Mon Sep 17 00:00:00 2001 From: Grigoryev Denis Date: Fri, 2 Oct 2015 16:14:41 +0000 Subject: mfd: tps6105x: Use i2c regmap to access registers This patch modifies tps6105x and associated function driver to use regmap instead of operating directly on i2c. Signed-off-by: Denis Grigoryev Signed-off-by: Lee Jones --- drivers/mfd/tps6105x.c | 78 ++++++---------------------------- drivers/regulator/tps6105x-regulator.c | 16 +++---- include/linux/mfd/tps6105x.h | 10 ++--- 3 files changed, 24 insertions(+), 80 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/tps6105x.c b/drivers/mfd/tps6105x.c index 5de95c265c1a..4a174cdb50b6 100644 --- a/drivers/mfd/tps6105x.c +++ b/drivers/mfd/tps6105x.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include @@ -25,73 +25,18 @@ #include #include -int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value) -{ - int ret; - - ret = mutex_lock_interruptible(&tps6105x->lock); - if (ret) - return ret; - ret = i2c_smbus_write_byte_data(tps6105x->client, reg, value); - mutex_unlock(&tps6105x->lock); - if (ret < 0) - return ret; - - return 0; -} -EXPORT_SYMBOL(tps6105x_set); - -int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf) -{ - int ret; - - ret = mutex_lock_interruptible(&tps6105x->lock); - if (ret) - return ret; - ret = i2c_smbus_read_byte_data(tps6105x->client, reg); - mutex_unlock(&tps6105x->lock); - if (ret < 0) - return ret; - - *buf = ret; - return 0; -} -EXPORT_SYMBOL(tps6105x_get); - -/* - * Masks off the bits in the mask and sets the bits in the bitvalues - * parameter in one atomic operation - */ -int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg, - u8 bitmask, u8 bitvalues) -{ - int ret; - u8 regval; - - ret = mutex_lock_interruptible(&tps6105x->lock); - if (ret) - return ret; - ret = i2c_smbus_read_byte_data(tps6105x->client, reg); - if (ret < 0) - goto fail; - regval = ret; - regval = (~bitmask & regval) | (bitmask & bitvalues); - ret = i2c_smbus_write_byte_data(tps6105x->client, reg, regval); -fail: - mutex_unlock(&tps6105x->lock); - if (ret < 0) - return ret; - - return 0; -} -EXPORT_SYMBOL(tps6105x_mask_and_set); +static struct regmap_config tps6105x_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = TPS6105X_REG_3, +}; static int tps6105x_startup(struct tps6105x *tps6105x) { int ret; - u8 regval; + unsigned int regval; - ret = tps6105x_get(tps6105x, TPS6105X_REG_0, ®val); + ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, ®val); if (ret) return ret; switch (regval >> TPS6105X_REG0_MODE_SHIFT) { @@ -145,11 +90,14 @@ static int tps6105x_probe(struct i2c_client *client, if (!tps6105x) return -ENOMEM; + tps6105x->regmap = devm_regmap_init_i2c(client, &tps6105x_regmap_config); + if (IS_ERR(tps6105x->regmap)) + return PTR_ERR(tps6105x->regmap); + i2c_set_clientdata(client, tps6105x); tps6105x->client = client; pdata = dev_get_platdata(&client->dev); tps6105x->pdata = pdata; - mutex_init(&tps6105x->lock); ret = tps6105x_startup(tps6105x); if (ret) { @@ -198,7 +146,7 @@ static int tps6105x_remove(struct i2c_client *client) mfd_remove_devices(&client->dev); /* Put chip in shutdown mode */ - tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0, + regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0, TPS6105X_REG0_MODE_MASK, TPS6105X_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT); diff --git a/drivers/regulator/tps6105x-regulator.c b/drivers/regulator/tps6105x-regulator.c index 3510b3e7330a..ddc4f10e268a 100644 --- a/drivers/regulator/tps6105x-regulator.c +++ b/drivers/regulator/tps6105x-regulator.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include @@ -33,7 +33,7 @@ static int tps6105x_regulator_enable(struct regulator_dev *rdev) int ret; /* Activate voltage mode */ - ret = tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0, + ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0, TPS6105X_REG0_MODE_MASK, TPS6105X_REG0_MODE_VOLTAGE << TPS6105X_REG0_MODE_SHIFT); if (ret) @@ -48,7 +48,7 @@ static int tps6105x_regulator_disable(struct regulator_dev *rdev) int ret; /* Set into shutdown mode */ - ret = tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0, + ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0, TPS6105X_REG0_MODE_MASK, TPS6105X_REG0_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT); if (ret) @@ -60,10 +60,10 @@ static int tps6105x_regulator_disable(struct regulator_dev *rdev) static int tps6105x_regulator_is_enabled(struct regulator_dev *rdev) { struct tps6105x *tps6105x = rdev_get_drvdata(rdev); - u8 regval; + unsigned int regval; int ret; - ret = tps6105x_get(tps6105x, TPS6105X_REG_0, ®val); + ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, ®val); if (ret) return ret; regval &= TPS6105X_REG0_MODE_MASK; @@ -78,10 +78,10 @@ static int tps6105x_regulator_is_enabled(struct regulator_dev *rdev) static int tps6105x_regulator_get_voltage_sel(struct regulator_dev *rdev) { struct tps6105x *tps6105x = rdev_get_drvdata(rdev); - u8 regval; + unsigned int regval; int ret; - ret = tps6105x_get(tps6105x, TPS6105X_REG_0, ®val); + ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, ®val); if (ret) return ret; @@ -96,7 +96,7 @@ static int tps6105x_regulator_set_voltage_sel(struct regulator_dev *rdev, struct tps6105x *tps6105x = rdev_get_drvdata(rdev); int ret; - ret = tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0, + ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0, TPS6105X_REG0_VOLTAGE_MASK, selector << TPS6105X_REG0_VOLTAGE_SHIFT); if (ret) diff --git a/include/linux/mfd/tps6105x.h b/include/linux/mfd/tps6105x.h index 386743dd931c..8bc51180800a 100644 --- a/include/linux/mfd/tps6105x.h +++ b/include/linux/mfd/tps6105x.h @@ -10,6 +10,7 @@ #define MFD_TPS6105X_H #include +#include #include /* @@ -82,20 +83,15 @@ struct tps6105x_platform_data { /** * struct tps6105x - state holder for the TPS6105x drivers - * @mutex: mutex to serialize I2C accesses * @i2c_client: corresponding I2C client * @regulator: regulator device if used in voltage mode + * @regmap: used for i2c communcation on accessing registers */ struct tps6105x { struct tps6105x_platform_data *pdata; - struct mutex lock; struct i2c_client *client; struct regulator_dev *regulator; + struct regmap *regmap; }; -extern int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value); -extern int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf); -extern int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg, - u8 bitmask, u8 bitvalues); - #endif -- cgit v1.2.3 From a9f226bcd9bb1941e581806e83d2c03d4043c367 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 13 Oct 2015 12:45:25 +0200 Subject: regulator: core: create unlocked version of regulator_set_voltage The unlocked version will be needed when we start propagating voltage changes to the supply regulators. Signed-off-by: Sascha Hauer Signed-off-by: Mark Brown --- drivers/regulator/core.c | 57 +++++++++++++++++++++++++++++------------------- 1 file changed, 34 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index f28c133693ad..5d161e11d5e6 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2761,33 +2761,14 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, return ret; } -/** - * regulator_set_voltage - set regulator output voltage - * @regulator: regulator source - * @min_uV: Minimum required voltage in uV - * @max_uV: Maximum acceptable voltage in uV - * - * Sets a voltage regulator to the desired output voltage. This can be set - * during any regulator state. IOW, regulator can be disabled or enabled. - * - * If the regulator is enabled then the voltage will change to the new value - * immediately otherwise if the regulator is disabled the regulator will - * output at the new voltage when enabled. - * - * NOTE: If the regulator is shared between several devices then the lowest - * request voltage that meets the system constraints will be used. - * Regulator system constraints must be set for this regulator before - * calling this function otherwise this call will fail. - */ -int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) +static int regulator_set_voltage_unlocked(struct regulator *regulator, + int min_uV, int max_uV) { struct regulator_dev *rdev = regulator->rdev; int ret = 0; int old_min_uV, old_max_uV; int current_uV; - mutex_lock(&rdev->mutex); - /* If we're setting the same range as last time the change * should be a noop (some cpufreq implementations use the same * voltage for multiple frequencies, for example). @@ -2835,12 +2816,42 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) goto out2; out: - mutex_unlock(&rdev->mutex); return ret; out2: regulator->min_uV = old_min_uV; regulator->max_uV = old_max_uV; - mutex_unlock(&rdev->mutex); + + return ret; +} + +/** + * regulator_set_voltage - set regulator output voltage + * @regulator: regulator source + * @min_uV: Minimum required voltage in uV + * @max_uV: Maximum acceptable voltage in uV + * + * Sets a voltage regulator to the desired output voltage. This can be set + * during any regulator state. IOW, regulator can be disabled or enabled. + * + * If the regulator is enabled then the voltage will change to the new value + * immediately otherwise if the regulator is disabled the regulator will + * output at the new voltage when enabled. + * + * NOTE: If the regulator is shared between several devices then the lowest + * request voltage that meets the system constraints will be used. + * Regulator system constraints must be set for this regulator before + * calling this function otherwise this call will fail. + */ +int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) +{ + int ret = 0; + + mutex_lock(®ulator->rdev->mutex); + + ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV); + + mutex_unlock(®ulator->rdev->mutex); + return ret; } EXPORT_SYMBOL_GPL(regulator_set_voltage); -- cgit v1.2.3 From a204f41e2d670c07c4dbd382d5bd8f6db8347ac2 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 20 Oct 2015 14:37:27 +0200 Subject: regulator: core: Factor out regulator_map_voltage _regulator_call_set_voltage has code to translate a minimum/maximum voltage pair into a selector. This code is useful for others aswell, so create a regulator_map_voltage function. Signed-off-by: Sascha Hauer Signed-off-by: Mark Brown --- drivers/regulator/core.c | 35 ++++++++++++++++++----------------- 1 file changed, 18 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 5d161e11d5e6..f15b04548715 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2606,6 +2606,23 @@ int regulator_is_supported_voltage(struct regulator *regulator, } EXPORT_SYMBOL_GPL(regulator_is_supported_voltage); +static int regulator_map_voltage(struct regulator_dev *rdev, int min_uV, + int max_uV) +{ + const struct regulator_desc *desc = rdev->desc; + + if (desc->ops->map_voltage) + return desc->ops->map_voltage(rdev, min_uV, max_uV); + + if (desc->ops->list_voltage == regulator_list_voltage_linear) + return regulator_map_voltage_linear(rdev, min_uV, max_uV); + + if (desc->ops->list_voltage == regulator_list_voltage_linear_range) + return regulator_map_voltage_linear_range(rdev, min_uV, max_uV); + + return regulator_map_voltage_iterate(rdev, min_uV, max_uV); +} + static int _regulator_call_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, unsigned *selector) @@ -2694,23 +2711,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, } } else if (rdev->desc->ops->set_voltage_sel) { - if (rdev->desc->ops->map_voltage) { - ret = rdev->desc->ops->map_voltage(rdev, min_uV, - max_uV); - } else { - if (rdev->desc->ops->list_voltage == - regulator_list_voltage_linear) - ret = regulator_map_voltage_linear(rdev, - min_uV, max_uV); - else if (rdev->desc->ops->list_voltage == - regulator_list_voltage_linear_range) - ret = regulator_map_voltage_linear_range(rdev, - min_uV, max_uV); - else - ret = regulator_map_voltage_iterate(rdev, - min_uV, max_uV); - } - + ret = regulator_map_voltage(rdev, min_uV, max_uV); if (ret >= 0) { best_val = rdev->desc->ops->list_voltage(rdev, ret); if (min_uV <= best_val && max_uV >= best_val) { -- cgit v1.2.3 From fc42112c0eaa6fc7c7fe61f8c6fb91b204b4d31d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 20 Oct 2015 14:37:28 +0200 Subject: regulator: core: Propagate voltage changes to supply regulators Until now changing the voltage of a regulator only ever effected the regulator itself, but never its supplies. It's a common pattern though to put LDO regulators behind switching regulators. The switching regulators efficiently drop the input voltage but have a high ripple on their output. The output is then cleaned up by the LDOs. For higher energy efficiency the voltage drop at the LDOs should be minimized. For this scenario we need to propagate the voltage change to the supply regulators. Another scenario where voltage propagation is desired is a regulator which only consists of a switch and thus cannot regulate voltages itself. In this case we can pass setting voltages to the supply. This patch adds support for voltage propagation. We do voltage propagation when the current regulator has a minimum dropout voltage specified or if the current regulator lacks a get_voltage operation (indicating it's a switch and not a regulator). Changing the supply voltage must be done carefully. When we are increasing the current regulators output we must first increase the supply voltage and then the regulator itself. When we are decreasing the current regulators voltage we must decrease the supply voltage after changing the current regulators voltage. Signed-off-by: Sascha Hauer Signed-off-by: Mark Brown --- drivers/regulator/core.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 52 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index f15b04548715..771c6235cced 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2769,6 +2769,8 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, int ret = 0; int old_min_uV, old_max_uV; int current_uV; + int best_supply_uV = 0; + int supply_change_uV = 0; /* If we're setting the same range as last time the change * should be a noop (some cpufreq implementations use the same @@ -2812,10 +2814,58 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, if (ret < 0) goto out2; + if (rdev->supply && (rdev->desc->min_dropout_uV || + !rdev->desc->ops->get_voltage)) { + int current_supply_uV; + int selector; + + selector = regulator_map_voltage(rdev, min_uV, max_uV); + if (selector < 0) { + ret = selector; + goto out2; + } + + best_supply_uV = _regulator_list_voltage(regulator, selector, 0); + if (best_supply_uV < 0) { + ret = best_supply_uV; + goto out2; + } + + best_supply_uV += rdev->desc->min_dropout_uV; + + current_supply_uV = _regulator_get_voltage(rdev->supply->rdev); + if (current_supply_uV < 0) { + ret = current_supply_uV; + goto out2; + } + + supply_change_uV = best_supply_uV - current_supply_uV; + } + + if (supply_change_uV > 0) { + ret = regulator_set_voltage_unlocked(rdev->supply, + best_supply_uV, INT_MAX); + if (ret) { + dev_err(&rdev->dev, "Failed to increase supply voltage: %d\n", + ret); + goto out2; + } + } + ret = _regulator_do_set_voltage(rdev, min_uV, max_uV); if (ret < 0) goto out2; + if (supply_change_uV < 0) { + ret = regulator_set_voltage_unlocked(rdev->supply, + best_supply_uV, INT_MAX); + if (ret) + dev_warn(&rdev->dev, "Failed to decrease supply voltage: %d\n", + ret); + /* No need to fail here */ + ret = 0; + } + out: return ret; out2: @@ -2847,11 +2897,11 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) { int ret = 0; - mutex_lock(®ulator->rdev->mutex); + regulator_lock_supply(regulator->rdev); ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV); - mutex_unlock(®ulator->rdev->mutex); + regulator_unlock_supply(regulator->rdev); return ret; } -- cgit v1.2.3 From d9b96d35d2521342fdbcbc7468a0f7dcfaba4147 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 3 Nov 2015 05:58:14 +0000 Subject: regulator: Use regulator_lock_supply() for get_voltage() too Since we need to read voltages of parents as part of setting supply voltages we need to be able to do get_voltage() internally without taking locks so reorganize the locking to take locks on the full tree on entry rather than as we recurse when called externally. Reported-by: John Stultz Tested-by: John Stultz Signed-off-by: Mark Brown --- drivers/regulator/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 771c6235cced..b4970eb85357 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3055,7 +3055,7 @@ static int _regulator_get_voltage(struct regulator_dev *rdev) } else if (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1)) { ret = rdev->desc->fixed_uV; } else if (rdev->supply) { - ret = regulator_get_voltage(rdev->supply); + ret = _regulator_get_voltage(rdev->supply->rdev); } else { return -EINVAL; } @@ -3078,11 +3078,11 @@ int regulator_get_voltage(struct regulator *regulator) { int ret; - mutex_lock(®ulator->rdev->mutex); + regulator_lock_supply(regulator->rdev); ret = _regulator_get_voltage(regulator->rdev); - mutex_unlock(®ulator->rdev->mutex); + regulator_unlock_supply(regulator->rdev); return ret; } -- cgit v1.2.3