From 352a2d5bfc336d980af69cb0ed24f86d9026f377 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Mon, 15 Apr 2013 13:06:54 -0500 Subject: gpio/omap: ensure gpio context is initialised Commit a2797be (gpio/omap: force restore if context loss is not detectable) broke gpio support for OMAP when booting with device-tree because a restore of the gpio context being performed without ever initialising the gpio context. In other words, the context restored was bad. This problem could also occur in the non device-tree case, however, it is much less likely because when booting without device-tree we can detect context loss via a platform specific API and so context restore is performed less often. Nevertheless we should ensure that the gpio context is initialised on the first pm-runtime resume for gpio banks that could lose their state regardless of whether we are booting with device-tree or not. The context loss count was being initialised on the first pm-runtime suspend following a resume, by populating the get_count_loss_count() function pointer after the first pm-runtime resume. To make the code more readable and logical, initialise the context loss count on the first pm-runtime resume if the context is not yet valid. Reported-by: Tony Lindgren Signed-off-by: Jon Hunter Acked-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Tony Lindgren Signed-off-by: Linus Walleij --- drivers/gpio/gpio-omap.c | 48 +++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 2050891d9c65..d3f7d2db870f 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -69,6 +69,7 @@ struct gpio_bank { bool is_mpuio; bool dbck_flag; bool loses_context; + bool context_valid; int stride; u32 width; int context_loss_count; @@ -1128,6 +1129,10 @@ static int omap_gpio_probe(struct platform_device *pdev) bank->loses_context = true; } else { bank->loses_context = pdata->loses_context; + + if (bank->loses_context) + bank->get_context_loss_count = + pdata->get_context_loss_count; } @@ -1178,9 +1183,6 @@ static int omap_gpio_probe(struct platform_device *pdev) omap_gpio_chip_init(bank); omap_gpio_show_rev(bank); - if (bank->loses_context) - bank->get_context_loss_count = pdata->get_context_loss_count; - pm_runtime_put(bank->dev); list_add_tail(&bank->node, &omap_gpio_list); @@ -1259,6 +1261,8 @@ update_gpio_context_count: return 0; } +static void omap_gpio_init_context(struct gpio_bank *p); + static int omap_gpio_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -1268,6 +1272,20 @@ static int omap_gpio_runtime_resume(struct device *dev) int c; spin_lock_irqsave(&bank->lock, flags); + + /* + * On the first resume during the probe, the context has not + * been initialised and so initialise it now. Also initialise + * the context loss count. + */ + if (bank->loses_context && !bank->context_valid) { + omap_gpio_init_context(bank); + + if (bank->get_context_loss_count) + bank->context_loss_count = + bank->get_context_loss_count(bank->dev); + } + _gpio_dbck_enable(bank); /* @@ -1384,6 +1402,29 @@ void omap2_gpio_resume_after_idle(void) } #if defined(CONFIG_PM_RUNTIME) +static void omap_gpio_init_context(struct gpio_bank *p) +{ + struct omap_gpio_reg_offs *regs = p->regs; + void __iomem *base = p->base; + + p->context.ctrl = __raw_readl(base + regs->ctrl); + p->context.oe = __raw_readl(base + regs->direction); + p->context.wake_en = __raw_readl(base + regs->wkup_en); + p->context.leveldetect0 = __raw_readl(base + regs->leveldetect0); + p->context.leveldetect1 = __raw_readl(base + regs->leveldetect1); + p->context.risingdetect = __raw_readl(base + regs->risingdetect); + p->context.fallingdetect = __raw_readl(base + regs->fallingdetect); + p->context.irqenable1 = __raw_readl(base + regs->irqenable); + p->context.irqenable2 = __raw_readl(base + regs->irqenable2); + + if (regs->set_dataout && p->regs->clr_dataout) + p->context.dataout = __raw_readl(base + regs->set_dataout); + else + p->context.dataout = __raw_readl(base + regs->dataout); + + p->context_valid = true; +} + static void omap_gpio_restore_context(struct gpio_bank *bank) { __raw_writel(bank->context.wake_en, @@ -1421,6 +1462,7 @@ static void omap_gpio_restore_context(struct gpio_bank *bank) #else #define omap_gpio_runtime_suspend NULL #define omap_gpio_runtime_resume NULL +static void omap_gpio_init_context(struct gpio_bank *p) {} #endif static const struct dev_pm_ops gpio_pm_ops = { -- cgit v1.2.3 From 0f119a840b128f18b20608f0d33895e85f381105 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 19 May 2013 19:11:54 +0800 Subject: gpio: mcp23s08: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m This patch fixes below build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m && CONFIG_GPIO_MCP23S08=y. LD init/built-in.o drivers/built-in.o: In function `mcp23017_write': clkdev.c:(.text+0x1e14): undefined reference to `i2c_smbus_write_word_data' drivers/built-in.o: In function `mcp23017_read': clkdev.c:(.text+0x1e24): undefined reference to `i2c_smbus_read_word_data' drivers/built-in.o: In function `mcp23008_write': clkdev.c:(.text+0x1e8c): undefined reference to `i2c_smbus_write_byte_data' drivers/built-in.o: In function `mcp23008_read': clkdev.c:(.text+0x1e98): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23008_read_regs': clkdev.c:(.text+0x1ed0): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23s08_init': clkdev.c:(.init.text+0x30): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `mcp23s08_exit': clkdev.c:(.exit.text+0x30): undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 When CONFIG_I2C=m, meaning we can't build the drivers in with I2C support. Thus don't allow the drivers to be compiled as built-in when CONFIG_I2C=m. The real fix though is to break the driver apart into a SPI part, an I2C part and a common part. But that's something for 3.11 while this is something for 3.10/stable. Signed-off-by: Axel Lin Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 87d567089f13..573c449c49b9 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -636,7 +636,7 @@ config GPIO_MAX7301 config GPIO_MCP23S08 tristate "Microchip MCP23xxx I/O expander" - depends on SPI_MASTER || I2C + depends on (SPI_MASTER && !I2C) || I2C help SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 I/O expanders. -- cgit v1.2.3 From 2519f9abced15b4327f03d7b8666827517582c29 Mon Sep 17 00:00:00 2001 From: David Cohen Date: Mon, 6 May 2013 16:11:03 -0700 Subject: gpio-langwell: fix irq conflicts when DT is not used When DT is not used IOAPIC does not register irq domain. As result IOAPIC won't care about gpio-langwell's virq and may cause conflict if an irq number is equal to gpio-langwell's virq mapped beforehand. This patch tells gpio_langwell to not ignore irq_base if != 0 and preferably use it to avoid the conflict. If DT is used, irq_base can safely be 0. Signed-off-by: David Cohen Acked-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/gpio/gpio-langwell.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c index 634c3d37f7b5..62ef10a641c4 100644 --- a/drivers/gpio/gpio-langwell.c +++ b/drivers/gpio/gpio-langwell.c @@ -324,6 +324,7 @@ static int lnw_gpio_probe(struct pci_dev *pdev, resource_size_t start, len; struct lnw_gpio *lnw; u32 gpio_base; + u32 irq_base; int retval; int ngpio = id->driver_data; @@ -345,6 +346,7 @@ static int lnw_gpio_probe(struct pci_dev *pdev, retval = -EFAULT; goto err_ioremap; } + irq_base = *(u32 *)base; gpio_base = *((u32 *)base + 1); /* release the IO mapping, since we already get the info from bar1 */ iounmap(base); @@ -365,13 +367,6 @@ static int lnw_gpio_probe(struct pci_dev *pdev, goto err_ioremap; } - lnw->domain = irq_domain_add_linear(pdev->dev.of_node, ngpio, - &lnw_gpio_irq_ops, lnw); - if (!lnw->domain) { - retval = -ENOMEM; - goto err_ioremap; - } - lnw->reg_base = base; lnw->chip.label = dev_name(&pdev->dev); lnw->chip.request = lnw_gpio_request; @@ -384,6 +379,14 @@ static int lnw_gpio_probe(struct pci_dev *pdev, lnw->chip.ngpio = ngpio; lnw->chip.can_sleep = 0; lnw->pdev = pdev; + + lnw->domain = irq_domain_add_simple(pdev->dev.of_node, ngpio, irq_base, + &lnw_gpio_irq_ops, lnw); + if (!lnw->domain) { + retval = -ENOMEM; + goto err_ioremap; + } + pci_set_drvdata(pdev, lnw); retval = gpiochip_add(&lnw->chip); if (retval) { -- cgit v1.2.3 From 90dae4ebf03063a70d992aad00d5f5a607c31db8 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 29 Apr 2013 16:07:18 +0200 Subject: gpio: mxs: Use set and clear capabilities of the gpio controller The current driver doesn't use the set and clear registers found on the mxs gpio controller. This leads the generic gpio controller to be using some internal value to avoid looking up the value stored in the registers, making it behave pretty much like a cache. This raises some coherency problem when a gpio is not modified by the gpio controller, while it can easily be fixed by using the set and clear registers. Signed-off-by: Maxime Ripard Acked-by: Shawn Guo Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mxs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c index 25000b0f8453..f8e6af20dfbf 100644 --- a/drivers/gpio/gpio-mxs.c +++ b/drivers/gpio/gpio-mxs.c @@ -326,7 +326,8 @@ static int mxs_gpio_probe(struct platform_device *pdev) err = bgpio_init(&port->bgc, &pdev->dev, 4, port->base + PINCTRL_DIN(port), - port->base + PINCTRL_DOUT(port), NULL, + port->base + PINCTRL_DOUT(port) + MXS_SET, + port->base + PINCTRL_DOUT(port) + MXS_CLR, port->base + PINCTRL_DOE(port), NULL, 0); if (err) goto out_irqdesc_free; -- cgit v1.2.3 From cfb10898efe1bc1f3eb8d8f37f164d9e2ac8b43a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 19 May 2013 14:00:47 +0800 Subject: gpio: Don't override the error code in probe error handling Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin Cc: Tomoya MORINAGA Cc: Denis Turischev Cc: Lars Poeschel Signed-off-by: Linus Walleij --- drivers/gpio/gpio-ml-ioh.c | 3 +-- drivers/gpio/gpio-pch.c | 3 +-- drivers/gpio/gpio-sch.c | 6 ++---- drivers/gpio/gpio-viperboard.c | 3 ++- 4 files changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c index b73366523fae..0966f2637ad2 100644 --- a/drivers/gpio/gpio-ml-ioh.c +++ b/drivers/gpio/gpio-ml-ioh.c @@ -496,8 +496,7 @@ err_irq_alloc_descs: err_gpiochip_add: while (--i >= 0) { chip--; - ret = gpiochip_remove(&chip->gpio); - if (ret) + if (gpiochip_remove(&chip->gpio)) dev_err(&pdev->dev, "Failed gpiochip_remove(%d)\n", i); } kfree(chip_save); diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c index cdf599687cf7..0fec097e838d 100644 --- a/drivers/gpio/gpio-pch.c +++ b/drivers/gpio/gpio-pch.c @@ -424,8 +424,7 @@ end: err_request_irq: irq_free_descs(irq_base, gpio_pins[chip->ioh]); - ret = gpiochip_remove(&chip->gpio); - if (ret) + if (gpiochip_remove(&chip->gpio)) dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__); err_gpiochip_add: diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c index 1e4de16ceb41..5af65719b95d 100644 --- a/drivers/gpio/gpio-sch.c +++ b/drivers/gpio/gpio-sch.c @@ -272,10 +272,8 @@ static int sch_gpio_probe(struct platform_device *pdev) return 0; err_sch_gpio_resume: - err = gpiochip_remove(&sch_gpio_core); - if (err) - dev_err(&pdev->dev, "%s failed, %d\n", - "gpiochip_remove()", err); + if (gpiochip_remove(&sch_gpio_core)) + dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__); err_sch_gpio_core: release_region(res->start, resource_size(res)); diff --git a/drivers/gpio/gpio-viperboard.c b/drivers/gpio/gpio-viperboard.c index 095ab14cea4d..5ac2919197fe 100644 --- a/drivers/gpio/gpio-viperboard.c +++ b/drivers/gpio/gpio-viperboard.c @@ -446,7 +446,8 @@ static int vprbrd_gpio_probe(struct platform_device *pdev) return ret; err_gpiob: - ret = gpiochip_remove(&vb_gpio->gpioa); + if (gpiochip_remove(&vb_gpio->gpioa)) + dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__); err_gpioa: return ret; -- cgit v1.2.3